Added dq_off_index attribute to mbmi to allow for switching between
dequantization modes.
Reduced number of different dequantization modes from 5 to 3.
Changed dequant_val_nuq to be allow for 3 dequant levels instead of 1.
Fixed lint errors
Change-Id: I7aee3548011aa4eee18adb09d835051c3108d2ee
In large-scale tile coding, when the number of tiles is large and the tile
size is small, using a fixed number of bytes in the tile header to store
tile-data size information as done in current VP9 codec would bring high
overhead for each tile. This patch implemented 2 ways to lower that overhead
and adaptively determine the number of bytes needed for tile-data size
transmission.
The test on a test clip having the tile size of 64x64 showed that the number
of bytes used for storing tile-data size was reduced from 4 to 1, which
substantially improved the compression ratio in large-scale tile coding.
Change-Id: Ia02fc43eda67fa252fbc2554321957790f53f6fd
These changes have been made in preparation for the work on the
extended coding unit size experiment.
Change-Id: I83f289812426bb9aba6c4a5fedd2b0e0a4fe17cb
Under the experiment of CONFIG_LAST4_REF. On derflr testset, using
highbitdepth (HBD), in average PSNR,
(1) LAST2+LAST3+LAST4 obtained +0.361% against LAST2+LAST3;
(2) LAST2+LAST3+LAST4 obtained +1.567% against baesline.
Change-Id: Ic8b14272de6a569df2b54418fa72b505e1ed3aad
Under experiment CONFIG_LAST3_REF, which can only be turned on when
the experiment of CONFIG_MULTI_REF is on, i.e. LAST3_FRAME can only
be used when LAST2_FRAME is used. CONFIG_LAST3_REF would most likely
be combined with CONFIG_MULTI_REF once the performance improvement
is further confirmed.
On the testset of derflr, using Average PSNR metrics, with HighBitDepth
(HBD) on:
(1) LAST2 HBD obtained +0.579% against base HBD;
(2) LAST2 + LAST3 HBD obtained +0.591% against LAST2 HBD;
(3) LAST2 + LAST3 HBD obtained +1.173% against base HBD.
Change-Id: I1aa2b2e2d2c9834e5f8e61bf2d8818c7b1516669
Under the experiment CONFIG_MULTI_REF. Current version shows
LAST2 vs base in nextgen on the testset of derflr:
(1) 8-bit: Average PSNR +0.53%
(worst: students_cif: -0.247%; best: mobile_cif: 1.902%)
(2) 12-bit HBD: Average PSNR +0.63%
(worst: pamphlet_cif: -0.213%, best: mobile_cif: 2.101%)
More tuning on the reference frame context design and default
probs are being conducted. This version does not guarantee to
work with other experiments in nextgen. A separate CL will address
the working with all other experiments.
Change-Id: I7f40d2522517afc26ca389c995bad56989587f65
Changes to allow high bit depth and palette to be enabled at the
same time by using a 16 bit (instead of 8bit) palette when high
bit depth is enabled and modifying related functions accordingly.
Change-Id: I97d30b4d9338d3a51db02c94bc568eba60a8905d
For the combination of this and removing NEWDV from the tree:
derflr: -0.101 screen_content: +0.053
The bulk of the decline in screen content effecincy is from the liquify
clip. These should be recoverable by further entropy tweaks.
Change-Id: I9d80152b8492e60a0367c31797fb6932fb09bba9
This commit allows the decoder to decode selective tiles according
to decoder configuration settings. To decode a single tile out of
the provided key frame bit-stream (test_kf.webm), set compiler
configuration:
--enable-experimental --enable-row-tile --enable-key-frame-tile
use the command:
vpxdec -o test_dec.y4m test_kf.webm --tile-row=1 --tile-column=2
where the tile's row and column indexes are 1 and 2, respectively.
To decode all row tiles inside a provided column index, use:
--tile-row=-1 --tile-column=2
To decode all column tiles inside a provided row index, use:
--tile-row=2 --tile-column=-1
Change-Id: Ib73c266414dcee7eaab5d741b90d0058970dae56
This commit allows the internal codec handle arbitrary tile size
in the unit of 64x64 pixel blocks.
Change-Id: I3ad24de392064645bebab887c94e1db957794916
Fix the row tile boundary detection issues. This allows to use
more resources for parallel encoding/decoding when avaiable.
Change-Id: Ifda9f66d1d7c2567dd4e0a572a99a83f179b55f9
Implements a first version of global motion where the
existing ZEROMV mode is converted to a translation only
global motion mode.
A lot of the code for supporting a rotation-zoom affine
model is also incorporated.
WIP.
Change-Id: Ia1288a8dfe82f89484d4e291780288388e56d91b
Do not treat first element (dc) differently.
on screen_content
tx-skip only: +16.4% (was +15.45%)
no significant impact on natrual videos
Change-Id: I79415a9e948ebbb4a69109311c10126d8a0b96ab
Adds a framework to incorporate a parameterized loop
postfilter in the coding loop after the application of the
standard deblocking loop filter.
The first version uses a straight bilateral filter
where the parameters conveyed are just spatial and
intensity gaussian variances.
Results on derflr:
+0.523% (only with this experiment)
+6.714% (with all expts other than intrabc)
Change-Id: I20d47285b4d25b8c6386ff8af2a75ff88ac2b69b
This patch allows the prediction residues of tx-skipped blocks
to use probs that are different from regular transfrom
coefficients for token entropy coding. Prediction residues are
assumed as in band 6.
The initial value of probs is obtained with stats from limited
tests. The statistic model for constrained token nodes has not
been optimized. The probs for token extra bits have not been
optimized. These can be future work.
Certain coding improvment is observed:
derflr with all experiments: +6.26% (+0.10%)
screen_content with palette: +22.48% (+1.28%)
Change-Id: I1c0d78178ee9f3655febb6f30cdaef8ee9f8e3cc
This framework allows lower quantization bins to be shrunk down or
expanded to match closer the source distribution (assuming a generalized
gaussian-like central peaky model for the coefficients) in an
entropy-constrained sense. Specifically, the width of the bins 0-4 are
modified as a factor of the nominal quantization step size and from 5
onwards all bins become the same as the nominal quantization step size.
Further, different bin width profiles as well as reconstruction values
can be used based on the coefficient band as well as the quantization step
size divided into 5 ranges.
A small gain currently on derflr of about 0.16% is observed with the
same paraemters for all q values.
Optimizing the parameters based on qstep value is left as a TODO for now.
Results on derflr with all expts on is +6.08% (up from 5.88%).
Experiments are in progress to tune the parameters for different
coefficient bands and quantization step ranges.
Change-Id: I88429d8cb0777021bfbb689ef69b764eafb3a1de
For 444 videos, a single palette of 3-d colors is
generated for YUV. For 420 videos, there may be two
palettes, one for Y, and the other for UV.
Also fixed a bug when palette and tx-skip are both on.
on derflr
--enable-palette +0.00%
with all experiments +5.87% (was +5.93%)
on screen_content
--enable-palette +6.00%
--enable-palette --enable-tx_skip +15.3%
on screen_content 444 version
--enable-palette +6.76%
--enable-palette --enable-tx_skip +19.5%
Change-Id: I7287090aecc90eebcd4335d132a8c2c3895dfdd4
This commit adds encoder side control for vp9 to set color space info
in the output compressed bitstream.
It also amends the "vp9_encoder_params_get_to_decoder" test to verify
the correct color space information is passed from the encoder end to
decoder end.
Change-Id: Ibf5fba2edcb2a8dc37557f6fae5c7816efa52650
(cherry picked from commit e94b415c3479129944a69fafbeacf550fb9237b7)
Added palette coding option for Y channel only, key frame only.
Palette colors are obtained with k-means clustering algorithm.
Run-length coding is used to compress the color indices.
On screen_content:
--enable-palette + 5.75%
--enable-palette --enable-tx_skip +15.04% (was 13.3%)
On derflr:
--enable-palette - 0.03%
with all the other expriments + 5.95% (was 5.98%)
Change-Id: I6d1cf45c889be764d14083170fdf14a424bd31b5
The functions b_width_log2 and b_height_log2 only do direct
table fetch. This commit unifies such use cases by using the
table directly and removes these functions.
Change-Id: I3103fc6ba959c1182886a2799d21b8b77c8a7b6b
mi_grid_* are arrays of pointer to pointer. They save the pointers that point
to the MIs in cm->mi. But they are unnecessary and complicated. The original
goal was to remove MODE_INFO_t copy. But with an extra MODE_INFO_t pointer
inside MODE_INFO_t, same goal could be achieved.
This commit totally removes the mi_grid_* structures. But there are still
many dummy MODE_INFO_t inside cm->mi which are a waste of memory. Next commit
will do on-demand MODE_INFO_t allocation in order to save these memories.
Change-Id: I3a05cf1610679fed26e0b2eadd315a9ae91afdd6
Adds config parameter vp9_highbitdepth, to support highbitdepth profiles.
Also includes most vpx level high bit-depth functions. However
encode/decode in the highbitdepth profiles will not work until
the rest of the code is in place.
Change-Id: I34c53b253c38873611057a6cbc89a1361b8985a6
In the current implementation of the encoder,
frame buffers may come from the wider set of
12 such buffers, and is not restricted to the
8 allowed as reference frames. This is only
an implementation detail and does not affect
the constraint of having a total of 8 reference
buffers overall.
Change-Id: I075f777146c2df49c275d89232933f8127235175
The test to determine if the mode info buffers need
to be resized when the frame size changes was
incorrect, as per bug 837.
By storing the size of the allocated data structure,
a simple test determines whether to allocate more
memory when the frame size changes.
Change-Id: I1544698f2882cf958fc672485614f2f46e9719bd
'ref_frame_map' is initialized to -1. avoids using an invalid index if
VP9_GET_REFERENCE/VP8_COPY_REFERENCE controls are issued after a decode
error.
Change-Id: I4599762c4d0b07a5943a72bf4a86ccb596cc062a
Replaced encoder and decoder functions to get a pointer
to a reference frame with a common function, vp9_get_ref_frame,
and simplified it.
Change-Id: Icb206fcce8caace3bfd1db3dbfa318dde79043ee
This patch fixes bug 633:
https://code.google.com/p/webm/issues/detail?id=633
The first decoded frame does not have to be a keyframe,
it could be an inter-frame that is coded intra-only.
This patch fixes the handling of intra-only frames.
A test vector has also been added that encodes 3
intra-only frames at the start of the clip. The
test vector was generated using the code in the
following patch:
https://gerrit.chromium.org/gerrit/#/c/70680/
Change-Id: Ib40b1dbf91aae2bc047e23c626eaef09d1860147
In non frame-parallel decoding, this works the same way as
current decoding scheme. Every time after decoder finish
decoding a frame, it will swap the current mode info pointer
and previous mode info pointer if the decoded frame needs
to be shown. Both mode info pointer and previous mode info
pointer are from mode info arrays.
In frame-parallel decoding, this will become more complicated
as current frame's mode info pointer will be shared with next
frame as previous mode info pointer. But when one decoder
thread finishes decoding one frame and starts to work on next
available frame, it needs to retain the decoded frame's mode
info pointers until next frame finishes decoding. The mode info
index will serve this purpose. The decoder will use different
buffer in the mode info arrays and use the other buffer to save
previous decoded frame’s mode info.
Change-Id: If11d57d8eb0ee38c8876158e5482177fcb229428
Adds some high-level hooks for profile 2 before further
progress on the implementation.
According to the definitiion in this patch:
1. Profile 2 only supports 10 or 12 bit color but not 8
2. Profile 2 supports all color sampling modes: 444, 422 and 420,
and alpha plane.
3. Profile 3 is currently undefined.
Please consider the definition carefully and suggest modifications
to the definition as needed.
Change-Id: I5b284fc679e54ac5aee171af72fa7994cfd28995
