vpx/vp9/encoder/vp9_segmentation.c

322 lines
12 KiB
C
Raw Normal View History

2010-05-18 17:58:33 +02:00
/*
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
* Copyright (c) 2012 The WebM project authors. All Rights Reserved.
2010-05-18 17:58:33 +02:00
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
2010-05-18 17:58:33 +02:00
*/
#include <limits.h>
2010-05-18 17:58:33 +02:00
#include "vpx_mem/vpx_mem.h"
#include "vp9/encoder/vp9_segmentation.h"
#include "vp9/common/vp9_pred_common.h"
#include "vp9/common/vp9_tile_common.h"
2010-05-18 17:58:33 +02:00
void vp9_enable_segmentation(VP9_PTR ptr) {
VP9_COMP *cpi = (VP9_COMP *)(ptr);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// Set the appropriate feature bit
cpi->mb.e_mbd.segmentation_enabled = 1;
cpi->mb.e_mbd.update_mb_segmentation_map = 1;
cpi->mb.e_mbd.update_mb_segmentation_data = 1;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
void vp9_disable_segmentation(VP9_PTR ptr) {
VP9_COMP *cpi = (VP9_COMP *)(ptr);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// Clear the appropriate feature bit
cpi->mb.e_mbd.segmentation_enabled = 0;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
void vp9_set_segmentation_map(VP9_PTR ptr,
unsigned char *segmentation_map) {
VP9_COMP *cpi = (VP9_COMP *)(ptr);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// Copy in the new segmentation map
vpx_memcpy(cpi->segmentation_map, segmentation_map,
(cpi->common.mb_rows * cpi->common.mb_cols));
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// Signal that the map should be updated.
cpi->mb.e_mbd.update_mb_segmentation_map = 1;
cpi->mb.e_mbd.update_mb_segmentation_data = 1;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
void vp9_set_segment_data(VP9_PTR ptr,
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
signed char *feature_data,
unsigned char abs_delta) {
VP9_COMP *cpi = (VP9_COMP *)(ptr);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
cpi->mb.e_mbd.mb_segment_abs_delta = abs_delta;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
vpx_memcpy(cpi->mb.e_mbd.segment_feature_data, feature_data,
sizeof(cpi->mb.e_mbd.segment_feature_data));
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// TBD ?? Set the feature mask
// vpx_memcpy(cpi->mb.e_mbd.segment_feature_mask, 0,
// sizeof(cpi->mb.e_mbd.segment_feature_mask));
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
// Based on set of segment counts calculate a probability tree
static void calc_segtree_probs(MACROBLOCKD *xd,
int *segcounts,
vp9_prob *segment_tree_probs) {
// Work out probabilities of each segment
segment_tree_probs[0] =
get_binary_prob(segcounts[0] + segcounts[1] + segcounts[2] + segcounts[3],
segcounts[4] + segcounts[5] + segcounts[6] + segcounts[7]);
segment_tree_probs[1] =
get_binary_prob(segcounts[0] + segcounts[1], segcounts[2] + segcounts[3]);
segment_tree_probs[2] = get_binary_prob(segcounts[0], segcounts[1]);
segment_tree_probs[3] = get_binary_prob(segcounts[2], segcounts[3]);
segment_tree_probs[4] =
get_binary_prob(segcounts[4] + segcounts[5], segcounts[6] + segcounts[7]);
segment_tree_probs[5] = get_binary_prob(segcounts[4], segcounts[5]);
segment_tree_probs[6] = get_binary_prob(segcounts[6], segcounts[7]);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
// Based on set of segment counts and probabilities calculate a cost estimate
static int cost_segmap(MACROBLOCKD *xd,
int *segcounts,
vp9_prob *probs) {
int cost;
int count1, count2;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// Cost the top node of the tree
count1 = segcounts[0] + segcounts[1] + segcounts[2] + segcounts[3];
count2 = segcounts[3] + segcounts[4] + segcounts[5] + segcounts[6];
cost = count1 * vp9_cost_zero(probs[0]) +
count2 * vp9_cost_one(probs[0]);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// Cost subsequent levels
if (count1 > 0) {
count1 = segcounts[0] + segcounts[1];
count2 = segcounts[2] + segcounts[3];
cost += count1 * vp9_cost_zero(probs[1]) +
count2 * vp9_cost_one(probs[1]);
if (count1 > 0)
cost += segcounts[0] * vp9_cost_zero(probs[2]) +
segcounts[1] * vp9_cost_one(probs[2]);
if (count2 > 0)
cost += segcounts[2] * vp9_cost_zero(probs[3]) +
segcounts[3] * vp9_cost_one(probs[3]);
}
if (count2 > 0) {
count1 = segcounts[4] + segcounts[5];
count2 = segcounts[6] + segcounts[7];
cost += count1 * vp9_cost_zero(probs[4]) +
count2 * vp9_cost_one(probs[4]);
if (count1 > 0)
cost += segcounts[4] * vp9_cost_zero(probs[5]) +
segcounts[5] * vp9_cost_one(probs[5]);
if (count2 > 0)
cost += segcounts[6] * vp9_cost_zero(probs[6]) +
segcounts[7] * vp9_cost_one(probs[6]);
}
return cost;
}
static void count_segs(VP9_COMP *cpi,
MODE_INFO *mi,
int *no_pred_segcounts,
int (*temporal_predictor_count)[2],
int *t_unpred_seg_counts,
int bw, int bh, int mb_row, int mb_col) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &cpi->mb.e_mbd;
const int segment_id = mi->mbmi.segment_id;
xd->mode_info_context = mi;
set_mb_row(cm, xd, mb_row, bh);
set_mb_col(cm, xd, mb_col, bw);
// Count the number of hits on each segment with no prediction
no_pred_segcounts[segment_id]++;
// Temporal prediction not allowed on key frames
if (cm->frame_type != KEY_FRAME) {
// Test to see if the segment id matches the predicted value.
const int pred_seg_id = vp9_get_pred_mb_segid(cm, mi->mbmi.sb_type,
mb_row, mb_col);
const int seg_predicted = (segment_id == pred_seg_id);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// Get the segment id prediction context
const int pred_context = vp9_get_pred_context(cm, xd, PRED_SEG_ID);
// Store the prediction status for this mb and update counts
// as appropriate
vp9_set_pred_flag(xd, PRED_SEG_ID, seg_predicted);
temporal_predictor_count[pred_context][seg_predicted]++;
if (!seg_predicted)
// Update the "unpredicted" segment count
t_unpred_seg_counts[segment_id]++;
}
}
void vp9_choose_segmap_coding_method(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &cpi->mb.e_mbd;
int no_pred_cost;
int t_pred_cost = INT_MAX;
int i;
int tile_col, mb_row, mb_col;
int temporal_predictor_count[PREDICTION_PROBS][2];
int no_pred_segcounts[MAX_MB_SEGMENTS];
int t_unpred_seg_counts[MAX_MB_SEGMENTS];
vp9_prob no_pred_tree[MB_SEG_TREE_PROBS];
vp9_prob t_pred_tree[MB_SEG_TREE_PROBS];
vp9_prob t_nopred_prob[PREDICTION_PROBS];
const int mis = cm->mode_info_stride;
[WIP] Add column-based tiling. This patch adds column-based tiling. The idea is to make each tile independently decodable (after reading the common frame header) and also independendly encodable (minus within-frame cost adjustments in the RD loop) to speed-up hardware & software en/decoders if they used multi-threading. Column-based tiling has the added advantage (over other tiling methods) that it minimizes realtime use-case latency, since all threads can start encoding data as soon as the first SB-row worth of data is available to the encoder. There is some test code that does random tile ordering in the decoder, to confirm that each tile is indeed independently decodable from other tiles in the same frame. At tile edges, all contexts assume default values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode), and motion vector search and ordering do not cross tiles in the same frame. t log Tile independence is not maintained between frames ATM, i.e. tile 0 of frame 1 is free to use motion vectors that point into any tile of frame 0. We support 1 (i.e. no tiling), 2 or 4 column-tiles. The loopfilter crosses tile boundaries. I discussed this briefly with Aki and he says that's OK. An in-loop loopfilter would need to do some sync between tile threads, but that shouldn't be a big issue. Resuls: with tiling disabled, we go up slightly because of improved edge use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf, ~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5% on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is concentrated in the low-bitrate end of clips, and most of it is because of the loss of edges at tile boundaries and the resulting loss of intra predictors. TODO: - more tiles (perhaps allow row-based tiling also, and max. 8 tiles)? - maybe optionally (for EC purposes), motion vectors themselves should not cross tile edges, or we should emulate such borders as if they were off-frame, to limit error propagation to within one tile only. This doesn't have to be the default behaviour but could be an optional bitstream flag. Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
2013-02-01 18:35:28 +01:00
MODE_INFO *mi_ptr, *mi;
// Set default state for the segment tree probabilities and the
// temporal coding probabilities
vpx_memset(xd->mb_segment_tree_probs, 255,
sizeof(xd->mb_segment_tree_probs));
vpx_memset(cm->segment_pred_probs, 255,
sizeof(cm->segment_pred_probs));
vpx_memset(no_pred_segcounts, 0, sizeof(no_pred_segcounts));
vpx_memset(t_unpred_seg_counts, 0, sizeof(t_unpred_seg_counts));
vpx_memset(temporal_predictor_count, 0, sizeof(temporal_predictor_count));
// First of all generate stats regarding how well the last segment map
// predicts this one
for (tile_col = 0; tile_col < cm->tile_columns; tile_col++) {
vp9_get_tile_col_offsets(cm, tile_col);
mi_ptr = cm->mi + cm->cur_tile_mb_col_start;
for (mb_row = 0; mb_row < cm->mb_rows; mb_row += 4, mi_ptr += 4 * mis) {
mi = mi_ptr;
for (mb_col = cm->cur_tile_mb_col_start;
mb_col < cm->cur_tile_mb_col_end; mb_col += 4, mi += 4) {
if (mi->mbmi.sb_type == BLOCK_SIZE_SB64X64) {
count_segs(cpi, mi, no_pred_segcounts, temporal_predictor_count,
t_unpred_seg_counts, 4, 4, mb_row, mb_col);
#if CONFIG_SBSEGMENT
} else if (mi->mbmi.sb_type == BLOCK_SIZE_SB64X32) {
count_segs(cpi, mi, no_pred_segcounts, temporal_predictor_count,
t_unpred_seg_counts, 4, 2, mb_row, mb_col);
if (mb_row + 2 != cm->mb_rows)
count_segs(cpi, mi + 2 * mis, no_pred_segcounts,
temporal_predictor_count,
t_unpred_seg_counts, 4, 2, mb_row + 2, mb_col);
} else if (mi->mbmi.sb_type == BLOCK_SIZE_SB32X64) {
count_segs(cpi, mi, no_pred_segcounts, temporal_predictor_count,
t_unpred_seg_counts, 2, 4, mb_row, mb_col);
if (mb_col + 2 != cm->mb_cols)
count_segs(cpi, mi + 2, no_pred_segcounts, temporal_predictor_count,
t_unpred_seg_counts, 2, 4, mb_row, mb_col + 2);
#endif
} else {
for (i = 0; i < 4; i++) {
int x_idx = (i & 1) << 1, y_idx = i & 2;
MODE_INFO *sb_mi = mi + y_idx * mis + x_idx;
if (mb_col + x_idx >= cm->mb_cols ||
mb_row + y_idx >= cm->mb_rows) {
continue;
}
if (sb_mi->mbmi.sb_type == BLOCK_SIZE_SB32X32) {
count_segs(cpi, sb_mi, no_pred_segcounts,
temporal_predictor_count, t_unpred_seg_counts, 2, 2,
mb_row + y_idx, mb_col + x_idx);
#if CONFIG_SBSEGMENT
} else if (sb_mi->mbmi.sb_type == BLOCK_SIZE_SB32X16) {
count_segs(cpi, sb_mi, no_pred_segcounts,
temporal_predictor_count,
t_unpred_seg_counts, 2, 1,
mb_row + y_idx, mb_col + x_idx);
if (mb_row + y_idx + 1 != cm->mb_rows)
count_segs(cpi, sb_mi + mis, no_pred_segcounts,
temporal_predictor_count,
t_unpred_seg_counts, 2, 1,
mb_row + y_idx + 1, mb_col + x_idx);
} else if (sb_mi->mbmi.sb_type == BLOCK_SIZE_SB16X32) {
count_segs(cpi, sb_mi, no_pred_segcounts,
temporal_predictor_count,
t_unpred_seg_counts, 1, 2,
mb_row + y_idx, mb_col + x_idx);
if (mb_col + x_idx + 1 != cm->mb_cols)
count_segs(cpi, sb_mi + 1, no_pred_segcounts,
temporal_predictor_count,
t_unpred_seg_counts, 1, 2,
mb_row + y_idx, mb_col + x_idx + 1);
#endif
} else {
int j;
for (j = 0; j < 4; j++) {
const int x_idx_mb = x_idx + (j & 1);
const int y_idx_mb = y_idx + (j >> 1);
MODE_INFO *mb_mi = mi + x_idx_mb + y_idx_mb * mis;
if (mb_col + x_idx_mb >= cm->mb_cols ||
mb_row + y_idx_mb >= cm->mb_rows) {
continue;
}
assert(mb_mi->mbmi.sb_type == BLOCK_SIZE_MB16X16);
count_segs(cpi, mb_mi, no_pred_segcounts,
temporal_predictor_count, t_unpred_seg_counts,
1, 1, mb_row + y_idx_mb, mb_col + x_idx_mb);
}
}
}
}
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
[WIP] Add column-based tiling. This patch adds column-based tiling. The idea is to make each tile independently decodable (after reading the common frame header) and also independendly encodable (minus within-frame cost adjustments in the RD loop) to speed-up hardware & software en/decoders if they used multi-threading. Column-based tiling has the added advantage (over other tiling methods) that it minimizes realtime use-case latency, since all threads can start encoding data as soon as the first SB-row worth of data is available to the encoder. There is some test code that does random tile ordering in the decoder, to confirm that each tile is indeed independently decodable from other tiles in the same frame. At tile edges, all contexts assume default values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode), and motion vector search and ordering do not cross tiles in the same frame. t log Tile independence is not maintained between frames ATM, i.e. tile 0 of frame 1 is free to use motion vectors that point into any tile of frame 0. We support 1 (i.e. no tiling), 2 or 4 column-tiles. The loopfilter crosses tile boundaries. I discussed this briefly with Aki and he says that's OK. An in-loop loopfilter would need to do some sync between tile threads, but that shouldn't be a big issue. Resuls: with tiling disabled, we go up slightly because of improved edge use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf, ~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5% on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is concentrated in the low-bitrate end of clips, and most of it is because of the loss of edges at tile boundaries and the resulting loss of intra predictors. TODO: - more tiles (perhaps allow row-based tiling also, and max. 8 tiles)? - maybe optionally (for EC purposes), motion vectors themselves should not cross tile edges, or we should emulate such borders as if they were off-frame, to limit error propagation to within one tile only. This doesn't have to be the default behaviour but could be an optional bitstream flag. Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
2013-02-01 18:35:28 +01:00
}
// Work out probability tree for coding segments without prediction
// and the cost.
calc_segtree_probs(xd, no_pred_segcounts, no_pred_tree);
no_pred_cost = cost_segmap(xd, no_pred_segcounts, no_pred_tree);
// Key frames cannot use temporal prediction
if (cm->frame_type != KEY_FRAME) {
// Work out probability tree for coding those segments not
// predicted using the temporal method and the cost.
calc_segtree_probs(xd, t_unpred_seg_counts, t_pred_tree);
t_pred_cost = cost_segmap(xd, t_unpred_seg_counts, t_pred_tree);
// Add in the cost of the signalling for each prediction context
for (i = 0; i < PREDICTION_PROBS; i++) {
t_nopred_prob[i] = get_binary_prob(temporal_predictor_count[i][0],
temporal_predictor_count[i][1]);
// Add in the predictor signaling cost
t_pred_cost += (temporal_predictor_count[i][0] *
vp9_cost_zero(t_nopred_prob[i])) +
(temporal_predictor_count[i][1] *
vp9_cost_one(t_nopred_prob[i]));
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
// Now choose which coding method to use.
if (t_pred_cost < no_pred_cost) {
cm->temporal_update = 1;
vpx_memcpy(xd->mb_segment_tree_probs,
t_pred_tree, sizeof(t_pred_tree));
vpx_memcpy(&cm->segment_pred_probs,
t_nopred_prob, sizeof(t_nopred_prob));
} else {
cm->temporal_update = 0;
vpx_memcpy(xd->mb_segment_tree_probs,
no_pred_tree, sizeof(no_pred_tree));
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}