vpx/vp9/encoder/vp9_rdopt.c

4023 lines
148 KiB
C
Raw Normal View History

2010-05-18 17:58:33 +02:00
/*
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
2010-05-18 17:58:33 +02:00
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
2010-05-18 17:58:33 +02:00
*/
#include <stdio.h>
#include <math.h>
#include <limits.h>
#include <assert.h>
#include "vp9/common/vp9_pragmas.h"
#include "vp9/encoder/vp9_tokenize.h"
#include "vp9/encoder/vp9_treewriter.h"
#include "vp9/encoder/vp9_onyx_int.h"
#include "vp9/encoder/vp9_modecosts.h"
#include "vp9/encoder/vp9_encodeintra.h"
#include "vp9/common/vp9_entropymode.h"
#include "vp9/common/vp9_reconinter.h"
#include "vp9/common/vp9_reconintra.h"
#include "vp9/common/vp9_findnearmv.h"
#include "vp9/common/vp9_quant_common.h"
#include "vp9/encoder/vp9_encodemb.h"
#include "vp9/encoder/vp9_quantize.h"
#include "vp9/encoder/vp9_variance.h"
#include "vp9/encoder/vp9_mcomp.h"
#include "vp9/encoder/vp9_rdopt.h"
#include "vp9/encoder/vp9_ratectrl.h"
2010-05-18 17:58:33 +02:00
#include "vpx_mem/vpx_mem.h"
#include "vp9/common/vp9_systemdependent.h"
#include "vp9/encoder/vp9_encodemv.h"
#include "vp9/common/vp9_seg_common.h"
#include "vp9/common/vp9_pred_common.h"
#include "vp9/common/vp9_entropy.h"
#include "vp9_rtcd.h"
#include "vp9/common/vp9_mvref_common.h"
#include "vp9/common/vp9_common.h"
#define INVALID_MV 0x80008000
/* Factor to weigh the rate for switchable interp filters */
#define SWITCHABLE_INTERP_RATE_FACTOR 1
DECLARE_ALIGNED(16, extern const uint8_t,
vp9_pt_energy_class[MAX_ENTROPY_TOKENS]);
#define LAST_FRAME_MODE_MASK 0xFFDADCD60
#define GOLDEN_FRAME_MODE_MASK 0xFFB5A3BB0
#define ALT_REF_MODE_MASK 0xFF8C648D0
const MODE_DEFINITION vp9_mode_order[MAX_MODES] = {
{RD_NEARESTMV, LAST_FRAME, NONE},
{RD_NEARESTMV, ALTREF_FRAME, NONE},
{RD_NEARESTMV, GOLDEN_FRAME, NONE},
2010-05-18 17:58:33 +02:00
{RD_DC_PRED, INTRA_FRAME, NONE},
{NEWMV, LAST_FRAME, NONE},
{RD_NEWMV, GOLDEN_FRAME, NONE},
{RD_NEARMV, LAST_FRAME, NONE},
{RD_NEARESTMV, LAST_FRAME, ALTREF_FRAME},
{RD_NEARESTMV, GOLDEN_FRAME, ALTREF_FRAME},
{RD_TM_PRED, INTRA_FRAME, NONE},
{RD_NEARMV, LAST_FRAME, ALTREF_FRAME},
{RD_NEWMV, LAST_FRAME, ALTREF_FRAME},
{RD_NEARMV, GOLDEN_FRAME, NONE},
{RD_NEARMV, GOLDEN_FRAME, ALTREF_FRAME},
{RD_NEWMV, GOLDEN_FRAME, ALTREF_FRAME},
{RD_SPLITMV, LAST_FRAME, NONE},
{RD_SPLITMV, GOLDEN_FRAME, NONE},
{RD_SPLITMV, ALTREF_FRAME, NONE},
{RD_SPLITMV, LAST_FRAME, ALTREF_FRAME},
{RD_SPLITMV, GOLDEN_FRAME, ALTREF_FRAME},
{RD_ZEROMV, LAST_FRAME, NONE},
{RD_ZEROMV, GOLDEN_FRAME, NONE},
{RD_ZEROMV, ALTREF_FRAME, NONE},
{RD_ZEROMV, LAST_FRAME, ALTREF_FRAME},
{RD_ZEROMV, GOLDEN_FRAME, ALTREF_FRAME},
{RD_I4X4_PRED, INTRA_FRAME, NONE},
{RD_H_PRED, INTRA_FRAME, NONE},
{RD_V_PRED, INTRA_FRAME, NONE},
{RD_D135_PRED, INTRA_FRAME, NONE},
{RD_D207_PRED, INTRA_FRAME, NONE},
{RD_D153_PRED, INTRA_FRAME, NONE},
{RD_D63_PRED, INTRA_FRAME, NONE},
{RD_D117_PRED, INTRA_FRAME, NONE},
{RD_D45_PRED, INTRA_FRAME, NONE},
2010-05-18 17:58:33 +02:00
};
// The baseline rd thresholds for breaking out of the rd loop for
// certain modes are assumed to be based on 8x8 blocks.
// This table is used to correct for blocks size.
// The factors here are << 2 (2 = x0.5, 32 = x8 etc).
static int rd_thresh_block_size_factor[BLOCK_SIZES] =
{2, 3, 3, 4, 6, 6, 8, 12, 12, 16, 24, 24, 32};
#define MAX_RD_THRESH_FACT 64
#define RD_THRESH_INC 1
static void fill_token_costs(vp9_coeff_cost *c,
vp9_coeff_probs_model (*p)[BLOCK_TYPES]) {
int i, j, k, l;
TX_SIZE t;
for (t = TX_4X4; t <= TX_32X32; t++)
for (i = 0; i < BLOCK_TYPES; i++)
for (j = 0; j < REF_TYPES; j++)
for (k = 0; k < COEF_BANDS; k++)
for (l = 0; l < PREV_COEF_CONTEXTS; l++) {
vp9_prob probs[ENTROPY_NODES];
vp9_model_to_full_probs(p[t][i][j][k][l], probs);
vp9_cost_tokens((int *)c[t][i][j][k][0][l], probs,
vp9_coef_tree);
vp9_cost_tokens_skip((int *)c[t][i][j][k][1][l], probs,
vp9_coef_tree);
assert(c[t][i][j][k][0][l][DCT_EOB_TOKEN] ==
c[t][i][j][k][1][l][DCT_EOB_TOKEN]);
}
}
static const int rd_iifactor[32] = {
4, 4, 3, 2, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
};
2010-05-18 17:58:33 +02:00
experiment extending the quantizer range Prior to this change, VP8 min quantizer is 4, which caps the highest quality around 51DB. This experimental change extends the min quantizer to 1, removes the cap and allows the highest quality to be around ~73DB, consistent with the fdct/idct round trip error. To test this change, at configure time use options: --enable-experimental --enable-extend_qrange The following is a brief log of changes in each of the patch sets patch set 1: In this commit, the quantization/dequantization constants are kept unchanged, instead scaling factor 4 is rolled into fdct/idct. Fixed Q0 encoding tests on mobile: Before: 9560.567kbps Overall PSNR:50.255DB VPXSSIM:98.288 Now: 18035.774kbps Overall PSNR:73.022DB VPXSSIM:99.991 patch set 2: regenerated dc/ac quantizer lookup tables based on the scaling factor rolled in the fdct/idct. Also slightly extended the range towards the high quantizer end. patch set 3: slightly tweaked the quantizer tables and generated bits_per_mb table based on Paul's suggestions. patch set 4: fix a typo in idct, re-calculated tables relating active max Q to active min Q patch set 5: added rdmult lookup table based on Q patch set 6: fix rdmult scale: dct coefficient has scaled up by 4 patch set 7: make transform coefficients to be within 16bits patch set 8: normalize 2nd order quantizers patch set 9: fix mis-spellings patch set 10: change the configure script and macros to allow experimental code to be enabled at configure time with --enable-extend_qrange patch set 11: rebase for merge Change-Id: Ib50641ddd44aba2a52ed890222c309faa31cc59c
2010-12-02 00:50:14 +01:00
// 3* dc_qlookup[Q]*dc_qlookup[Q];
/* values are now correlated to quantizer */
static int sad_per_bit16lut[QINDEX_RANGE];
static int sad_per_bit4lut[QINDEX_RANGE];
void vp9_init_me_luts() {
int i;
// Initialize the sad lut tables using a formulaic calculation for now
// This is to make it easier to resolve the impact of experimental changes
// to the quantizer tables.
for (i = 0; i < QINDEX_RANGE; i++) {
sad_per_bit16lut[i] =
(int)((0.0418 * vp9_convert_qindex_to_q(i)) + 2.4107);
sad_per_bit4lut[i] = (int)(0.063 * vp9_convert_qindex_to_q(i) + 2.742);
}
}
2010-05-18 17:58:33 +02:00
static int compute_rd_mult(int qindex) {
const int q = vp9_dc_quant(qindex, 0);
return (11 * q * q) >> 2;
}
static MB_PREDICTION_MODE rd_mode_to_mode(RD_PREDICTION_MODE rd_mode) {
if (rd_mode == RD_SPLITMV || rd_mode == RD_I4X4_PRED) {
assert(!"Invalid rd_mode");
return MB_MODE_COUNT;
}
assert((int)rd_mode < (int)MB_MODE_COUNT);
return (MB_PREDICTION_MODE)rd_mode;
}
void vp9_initialize_me_consts(VP9_COMP *cpi, int qindex) {
cpi->mb.sadperbit16 = sad_per_bit16lut[qindex];
cpi->mb.sadperbit4 = sad_per_bit4lut[qindex];
2010-05-18 17:58:33 +02:00
}
experiment extending the quantizer range Prior to this change, VP8 min quantizer is 4, which caps the highest quality around 51DB. This experimental change extends the min quantizer to 1, removes the cap and allows the highest quality to be around ~73DB, consistent with the fdct/idct round trip error. To test this change, at configure time use options: --enable-experimental --enable-extend_qrange The following is a brief log of changes in each of the patch sets patch set 1: In this commit, the quantization/dequantization constants are kept unchanged, instead scaling factor 4 is rolled into fdct/idct. Fixed Q0 encoding tests on mobile: Before: 9560.567kbps Overall PSNR:50.255DB VPXSSIM:98.288 Now: 18035.774kbps Overall PSNR:73.022DB VPXSSIM:99.991 patch set 2: regenerated dc/ac quantizer lookup tables based on the scaling factor rolled in the fdct/idct. Also slightly extended the range towards the high quantizer end. patch set 3: slightly tweaked the quantizer tables and generated bits_per_mb table based on Paul's suggestions. patch set 4: fix a typo in idct, re-calculated tables relating active max Q to active min Q patch set 5: added rdmult lookup table based on Q patch set 6: fix rdmult scale: dct coefficient has scaled up by 4 patch set 7: make transform coefficients to be within 16bits patch set 8: normalize 2nd order quantizers patch set 9: fix mis-spellings patch set 10: change the configure script and macros to allow experimental code to be enabled at configure time with --enable-extend_qrange patch set 11: rebase for merge Change-Id: Ib50641ddd44aba2a52ed890222c309faa31cc59c
2010-12-02 00:50:14 +01:00
void vp9_initialize_rd_consts(VP9_COMP *cpi, int qindex) {
int q, i, bsize;
2010-05-18 17:58:33 +02:00
vp9_clear_system_state(); // __asm emms;
2010-05-18 17:58:33 +02:00
// Further tests required to see if optimum is different
// for key frames, golden frames and arf frames.
// if (cpi->common.refresh_golden_frame ||
// cpi->common.refresh_alt_ref_frame)
qindex = clamp(qindex, 0, MAXQ);
cpi->RDMULT = compute_rd_mult(qindex);
if (cpi->pass == 2 && (cpi->common.frame_type != KEY_FRAME)) {
if (cpi->twopass.next_iiratio > 31)
cpi->RDMULT += (cpi->RDMULT * rd_iifactor[31]) >> 4;
else
cpi->RDMULT +=
(cpi->RDMULT * rd_iifactor[cpi->twopass.next_iiratio]) >> 4;
}
cpi->mb.errorperbit = cpi->RDMULT >> 6;
cpi->mb.errorperbit += (cpi->mb.errorperbit == 0);
vp9_set_speed_features(cpi);
2010-05-18 17:58:33 +02:00
q = (int)pow(vp9_dc_quant(qindex, 0) >> 2, 1.25);
q <<= 2;
if (q < 8)
q = 8;
experiment extending the quantizer range Prior to this change, VP8 min quantizer is 4, which caps the highest quality around 51DB. This experimental change extends the min quantizer to 1, removes the cap and allows the highest quality to be around ~73DB, consistent with the fdct/idct round trip error. To test this change, at configure time use options: --enable-experimental --enable-extend_qrange The following is a brief log of changes in each of the patch sets patch set 1: In this commit, the quantization/dequantization constants are kept unchanged, instead scaling factor 4 is rolled into fdct/idct. Fixed Q0 encoding tests on mobile: Before: 9560.567kbps Overall PSNR:50.255DB VPXSSIM:98.288 Now: 18035.774kbps Overall PSNR:73.022DB VPXSSIM:99.991 patch set 2: regenerated dc/ac quantizer lookup tables based on the scaling factor rolled in the fdct/idct. Also slightly extended the range towards the high quantizer end. patch set 3: slightly tweaked the quantizer tables and generated bits_per_mb table based on Paul's suggestions. patch set 4: fix a typo in idct, re-calculated tables relating active max Q to active min Q patch set 5: added rdmult lookup table based on Q patch set 6: fix rdmult scale: dct coefficient has scaled up by 4 patch set 7: make transform coefficients to be within 16bits patch set 8: normalize 2nd order quantizers patch set 9: fix mis-spellings patch set 10: change the configure script and macros to allow experimental code to be enabled at configure time with --enable-extend_qrange patch set 11: rebase for merge Change-Id: Ib50641ddd44aba2a52ed890222c309faa31cc59c
2010-12-02 00:50:14 +01:00
if (cpi->RDMULT > 1000) {
cpi->RDDIV = 1;
cpi->RDMULT /= 100;
2010-05-18 17:58:33 +02:00
for (bsize = 0; bsize < BLOCK_SIZES; ++bsize) {
for (i = 0; i < MAX_MODES; ++i) {
// Threshold here seem unecessarily harsh but fine given actual
// range of values used for cpi->sf.thresh_mult[]
int thresh_max = INT_MAX / (q * rd_thresh_block_size_factor[bsize]);
// *4 relates to the scaling of rd_thresh_block_size_factor[]
if ((int64_t)cpi->sf.thresh_mult[i] < thresh_max) {
cpi->rd_threshes[bsize][i] =
cpi->sf.thresh_mult[i] * q *
rd_thresh_block_size_factor[bsize] / (4 * 100);
} else {
cpi->rd_threshes[bsize][i] = INT_MAX;
}
}
2010-05-18 17:58:33 +02:00
}
} else {
cpi->RDDIV = 100;
2010-05-18 17:58:33 +02:00
for (bsize = 0; bsize < BLOCK_SIZES; ++bsize) {
for (i = 0; i < MAX_MODES; i++) {
// Threshold here seem unecessarily harsh but fine given actual
// range of values used for cpi->sf.thresh_mult[]
int thresh_max = INT_MAX / (q * rd_thresh_block_size_factor[bsize]);
if (cpi->sf.thresh_mult[i] < thresh_max) {
cpi->rd_threshes[bsize][i] =
cpi->sf.thresh_mult[i] * q *
rd_thresh_block_size_factor[bsize] / 4;
} else {
cpi->rd_threshes[bsize][i] = INT_MAX;
}
}
2010-05-18 17:58:33 +02:00
}
}
2010-05-18 17:58:33 +02:00
fill_token_costs(cpi->mb.token_costs, cpi->common.fc.coef_probs);
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
for (i = 0; i < NUM_PARTITION_CONTEXTS; i++)
vp9_cost_tokens(cpi->mb.partition_cost[i],
cpi->common.fc.partition_prob[cpi->common.frame_type][i],
vp9_partition_tree);
/*rough estimate for costing*/
vp9_init_mode_costs(cpi);
2010-05-18 17:58:33 +02:00
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
if (cpi->common.frame_type != KEY_FRAME) {
vp9_build_nmv_cost_table(
cpi->mb.nmvjointcost,
cpi->mb.e_mbd.allow_high_precision_mv ?
cpi->mb.nmvcost_hp : cpi->mb.nmvcost,
&cpi->common.fc.nmvc,
cpi->mb.e_mbd.allow_high_precision_mv, 1, 1);
for (i = 0; i < INTER_MODE_CONTEXTS; i++) {
MB_PREDICTION_MODE m;
for (m = NEARESTMV; m < MB_MODE_COUNT; m++)
cpi->mb.inter_mode_cost[i][m - NEARESTMV] =
cost_token(vp9_inter_mode_tree,
cpi->common.fc.inter_mode_probs[i],
vp9_inter_mode_encodings - NEARESTMV + m);
}
}
2010-05-18 17:58:33 +02:00
}
static INLINE void linear_interpolate2(double x, int ntab, int inv_step,
const double *tab1, const double *tab2,
double *v1, double *v2) {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
double y = x * inv_step;
int d = (int) y;
if (d >= ntab - 1) {
*v1 = tab1[ntab - 1];
*v2 = tab2[ntab - 1];
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
} else {
double a = y - d;
*v1 = tab1[d] * (1 - a) + tab1[d + 1] * a;
*v2 = tab2[d] * (1 - a) + tab2[d + 1] * a;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
}
static void model_rd_norm(double x, double *R, double *D) {
static const int inv_tab_step = 8;
static const int tab_size = 120;
// NOTE: The tables below must be of the same size
//
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
// Normalized rate
// This table models the rate for a Laplacian source
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
// source with given variance when quantized with a uniform quantizer
// with given stepsize. The closed form expression is:
// Rn(x) = H(sqrt(r)) + sqrt(r)*[1 + H(r)/(1 - r)],
// where r = exp(-sqrt(2) * x) and x = qpstep / sqrt(variance),
// and H(x) is the binary entropy function.
static const double rate_tab[] = {
64.00, 4.944, 3.949, 3.372, 2.966, 2.655, 2.403, 2.194,
2.014, 1.858, 1.720, 1.596, 1.485, 1.384, 1.291, 1.206,
1.127, 1.054, 0.986, 0.923, 0.863, 0.808, 0.756, 0.708,
0.662, 0.619, 0.579, 0.541, 0.506, 0.473, 0.442, 0.412,
0.385, 0.359, 0.335, 0.313, 0.291, 0.272, 0.253, 0.236,
0.220, 0.204, 0.190, 0.177, 0.165, 0.153, 0.142, 0.132,
0.123, 0.114, 0.106, 0.099, 0.091, 0.085, 0.079, 0.073,
0.068, 0.063, 0.058, 0.054, 0.050, 0.047, 0.043, 0.040,
0.037, 0.034, 0.032, 0.029, 0.027, 0.025, 0.023, 0.022,
0.020, 0.019, 0.017, 0.016, 0.015, 0.014, 0.013, 0.012,
0.011, 0.010, 0.009, 0.008, 0.008, 0.007, 0.007, 0.006,
0.006, 0.005, 0.005, 0.005, 0.004, 0.004, 0.004, 0.003,
0.003, 0.003, 0.003, 0.002, 0.002, 0.002, 0.002, 0.002,
0.002, 0.001, 0.001, 0.001, 0.001, 0.001, 0.001, 0.001,
0.001, 0.001, 0.001, 0.001, 0.001, 0.001, 0.001, 0.000,
};
// Normalized distortion
// This table models the normalized distortion for a Laplacian source
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
// source with given variance when quantized with a uniform quantizer
// with given stepsize. The closed form expression is:
// Dn(x) = 1 - 1/sqrt(2) * x / sinh(x/sqrt(2))
// where x = qpstep / sqrt(variance)
// Note the actual distortion is Dn * variance.
static const double dist_tab[] = {
0.000, 0.001, 0.005, 0.012, 0.021, 0.032, 0.045, 0.061,
0.079, 0.098, 0.119, 0.142, 0.166, 0.190, 0.216, 0.242,
0.269, 0.296, 0.324, 0.351, 0.378, 0.405, 0.432, 0.458,
0.484, 0.509, 0.534, 0.557, 0.580, 0.603, 0.624, 0.645,
0.664, 0.683, 0.702, 0.719, 0.735, 0.751, 0.766, 0.780,
0.794, 0.807, 0.819, 0.830, 0.841, 0.851, 0.861, 0.870,
0.878, 0.886, 0.894, 0.901, 0.907, 0.913, 0.919, 0.925,
0.930, 0.935, 0.939, 0.943, 0.947, 0.951, 0.954, 0.957,
0.960, 0.963, 0.966, 0.968, 0.971, 0.973, 0.975, 0.976,
0.978, 0.980, 0.981, 0.982, 0.984, 0.985, 0.986, 0.987,
0.988, 0.989, 0.990, 0.990, 0.991, 0.992, 0.992, 0.993,
0.993, 0.994, 0.994, 0.995, 0.995, 0.996, 0.996, 0.996,
0.996, 0.997, 0.997, 0.997, 0.997, 0.998, 0.998, 0.998,
0.998, 0.998, 0.998, 0.999, 0.999, 0.999, 0.999, 0.999,
0.999, 0.999, 0.999, 0.999, 0.999, 0.999, 0.999, 1.000,
};
/*
assert(sizeof(rate_tab) == tab_size * sizeof(rate_tab[0]);
assert(sizeof(dist_tab) == tab_size * sizeof(dist_tab[0]);
assert(sizeof(rate_tab) == sizeof(dist_tab));
*/
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
assert(x >= 0.0);
linear_interpolate2(x, tab_size, inv_tab_step,
rate_tab, dist_tab, R, D);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
static void model_rd_from_var_lapndz(int var, int n, int qstep,
int *rate, int64_t *dist) {
// This function models the rate and distortion for a Laplacian
// source with given variance when quantized with a uniform quantizer
// with given stepsize. The closed form expressions are in:
// Hang and Chen, "Source Model for transform video coder and its
// application - Part I: Fundamental Theory", IEEE Trans. Circ.
// Sys. for Video Tech., April 1997.
vp9_clear_system_state();
if (var == 0 || n == 0) {
*rate = 0;
*dist = 0;
} else {
double D, R;
double s2 = (double) var / n;
double x = qstep / sqrt(s2);
model_rd_norm(x, &R, &D);
*rate = ((n << 8) * R + 0.5);
*dist = (var * D + 0.5);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
vp9_clear_system_state();
}
static void model_rd_for_sb(VP9_COMP *cpi, BLOCK_SIZE bsize,
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
MACROBLOCK *x, MACROBLOCKD *xd,
int *out_rate_sum, int64_t *out_dist_sum) {
// Note our transform coeffs are 8 times an orthogonal transform.
// Hence quantizer step is also 8 times. To get effective quantizer
// we need to divide by 8 before sending to modeling function.
int i, rate_sum = 0, dist_sum = 0;
for (i = 0; i < MAX_MB_PLANE; ++i) {
struct macroblock_plane *const p = &x->plane[i];
struct macroblockd_plane *const pd = &xd->plane[i];
const BLOCK_SIZE bs = get_plane_block_size(bsize, pd);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
unsigned int sse;
int rate;
int64_t dist;
(void) cpi->fn_ptr[bs].vf(p->src.buf, p->src.stride,
pd->dst.buf, pd->dst.stride, &sse);
// sse works better than var, since there is no dc prediction used
model_rd_from_var_lapndz(sse, 1 << num_pels_log2_lookup[bs],
pd->dequant[1] >> 3, &rate, &dist);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
rate_sum += rate;
dist_sum += dist;
}
*out_rate_sum = rate_sum;
*out_dist_sum = dist_sum << 4;
}
static void model_rd_for_sb_y_tx(VP9_COMP *cpi, BLOCK_SIZE bsize,
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
TX_SIZE tx_size,
MACROBLOCK *x, MACROBLOCKD *xd,
int *out_rate_sum, int64_t *out_dist_sum,
int *out_skip) {
int j, k;
BLOCK_SIZE bs;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
struct macroblock_plane *const p = &x->plane[0];
struct macroblockd_plane *const pd = &xd->plane[0];
const int width = 4 << num_4x4_blocks_wide_lookup[bsize];
const int height = 4 << num_4x4_blocks_high_lookup[bsize];
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
int rate_sum = 0;
int64_t dist_sum = 0;
const int t = 4 << tx_size;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
if (tx_size == TX_4X4) {
bs = BLOCK_4X4;
} else if (tx_size == TX_8X8) {
bs = BLOCK_8X8;
} else if (tx_size == TX_16X16) {
bs = BLOCK_16X16;
} else if (tx_size == TX_32X32) {
bs = BLOCK_32X32;
} else {
assert(0);
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
*out_skip = 1;
for (j = 0; j < height; j += t) {
for (k = 0; k < width; k += t) {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
int rate;
int64_t dist;
unsigned int sse;
cpi->fn_ptr[bs].vf(&p->src.buf[j * p->src.stride + k], p->src.stride,
&pd->dst.buf[j * pd->dst.stride + k], pd->dst.stride,
&sse);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
// sse works better than var, since there is no dc prediction used
model_rd_from_var_lapndz(sse, t * t, pd->dequant[1] >> 3, &rate, &dist);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
rate_sum += rate;
dist_sum += dist;
*out_skip &= (rate < 1024);
}
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
*out_rate_sum = rate_sum;
*out_dist_sum = dist_sum << 4;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
int64_t vp9_block_error_c(int16_t *coeff, int16_t *dqcoeff,
intptr_t block_size, int64_t *ssz) {
int i;
int64_t error = 0, sqcoeff = 0;
2010-05-18 17:58:33 +02:00
for (i = 0; i < block_size; i++) {
int this_diff = coeff[i] - dqcoeff[i];
error += (unsigned)this_diff * this_diff;
sqcoeff += (unsigned) coeff[i] * coeff[i];
}
2010-05-18 17:58:33 +02:00
*ssz = sqcoeff;
return error;
2010-05-18 17:58:33 +02:00
}
/* The trailing '0' is a terminator which is used inside cost_coeffs() to
* decide whether to include cost of a trailing EOB node or not (i.e. we
* can skip this if the last coefficient in this transform block, e.g. the
* 16th coefficient in a 4x4 block or the 64th coefficient in a 8x8 block,
* were non-zero). */
static const int16_t band_counts[TX_SIZES][8] = {
{ 1, 2, 3, 4, 3, 16 - 13, 0 },
{ 1, 2, 3, 4, 11, 64 - 21, 0 },
{ 1, 2, 3, 4, 11, 256 - 21, 0 },
{ 1, 2, 3, 4, 11, 1024 - 21, 0 },
};
static INLINE int cost_coeffs(MACROBLOCK *mb,
int plane, int block,
ENTROPY_CONTEXT *A, ENTROPY_CONTEXT *L,
TX_SIZE tx_size,
const int16_t *scan, const int16_t *nb) {
MACROBLOCKD *const xd = &mb->e_mbd;
MB_MODE_INFO *mbmi = &xd->mode_info_context->mbmi;
struct macroblockd_plane *pd = &xd->plane[plane];
const PLANE_TYPE type = pd->plane_type;
const int16_t *band_count = &band_counts[tx_size][1];
const int eob = pd->eobs[block];
const int16_t *const qcoeff_ptr = BLOCK_OFFSET(pd->qcoeff, block);
const int ref = mbmi->ref_frame[0] != INTRA_FRAME;
unsigned int (*token_costs)[2][PREV_COEF_CONTEXTS][MAX_ENTROPY_TOKENS] =
mb->token_costs[tx_size][type][ref];
const ENTROPY_CONTEXT above_ec = !!*A, left_ec = !!*L;
uint8_t token_cache[1024];
int pt = combine_entropy_contexts(above_ec, left_ec);
int c, cost;
// Check for consistency of tx_size with mode info
assert(type == PLANE_TYPE_Y_WITH_DC ? mbmi->tx_size == tx_size
: get_uv_tx_size(mbmi) == tx_size);
if (eob == 0) {
// single eob token
cost = token_costs[0][0][pt][DCT_EOB_TOKEN];
c = 0;
} else {
int band_left = *band_count++;
// dc token
int v = qcoeff_ptr[0];
int prev_t = vp9_dct_value_tokens_ptr[v].token;
cost = (*token_costs)[0][pt][prev_t] + vp9_dct_value_cost_ptr[v];
token_cache[0] = vp9_pt_energy_class[prev_t];
++token_costs;
// ac tokens
for (c = 1; c < eob; c++) {
const int rc = scan[c];
int t;
v = qcoeff_ptr[rc];
t = vp9_dct_value_tokens_ptr[v].token;
pt = get_coef_context(nb, token_cache, c);
cost += (*token_costs)[!prev_t][pt][t] + vp9_dct_value_cost_ptr[v];
token_cache[rc] = vp9_pt_energy_class[t];
prev_t = t;
if (!--band_left) {
band_left = *band_count++;
++token_costs;
}
}
// eob token
if (band_left) {
pt = get_coef_context(nb, token_cache, c);
cost += (*token_costs)[0][pt][DCT_EOB_TOKEN];
}
}
// is eob first coefficient;
*A = *L = (c > 0);
return cost;
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
struct rdcost_block_args {
MACROBLOCK *x;
ENTROPY_CONTEXT t_above[16];
ENTROPY_CONTEXT t_left[16];
TX_SIZE tx_size;
int bw;
int bh;
int rate;
int64_t dist;
int64_t sse;
int64_t best_rd;
int skip;
const int16_t *scan, *nb;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
};
static void dist_block(int plane, int block, TX_SIZE tx_size, void *arg) {
const int ss_txfrm_size = tx_size << 1;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
struct rdcost_block_args* args = arg;
MACROBLOCK* const x = args->x;
MACROBLOCKD* const xd = &x->e_mbd;
struct macroblock_plane *const p = &x->plane[plane];
struct macroblockd_plane *const pd = &xd->plane[plane];
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
int64_t this_sse;
int shift = args->tx_size == TX_32X32 ? 0 : 2;
int16_t *const coeff = BLOCK_OFFSET(p->coeff, block);
int16_t *const dqcoeff = BLOCK_OFFSET(pd->dqcoeff, block);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
args->dist += vp9_block_error(coeff, dqcoeff, 16 << ss_txfrm_size,
&this_sse) >> shift;
args->sse += this_sse >> shift;
if (x->skip_encode &&
xd->mode_info_context->mbmi.ref_frame[0] == INTRA_FRAME) {
// TODO(jingning): tune the model to better capture the distortion.
int64_t p = (pd->dequant[1] * pd->dequant[1] *
(1 << ss_txfrm_size)) >> shift;
args->dist += p;
args->sse += p;
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
static void rate_block(int plane, int block, BLOCK_SIZE plane_bsize,
TX_SIZE tx_size, void *arg) {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
struct rdcost_block_args* args = arg;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
int x_idx, y_idx;
txfrm_block_to_raster_xy(plane_bsize, args->tx_size, block, &x_idx, &y_idx);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
args->rate += cost_coeffs(args->x, plane, block,
args->t_above + x_idx,
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
args->t_left + y_idx, args->tx_size,
args->scan, args->nb);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
static void block_yrd_txfm(int plane, int block, BLOCK_SIZE plane_bsize,
TX_SIZE tx_size, void *arg) {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
struct rdcost_block_args *args = arg;
MACROBLOCK *const x = args->x;
MACROBLOCKD *const xd = &x->e_mbd;
struct encode_b_args encode_args = {x, NULL};
int64_t rd1, rd2, rd;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
if (args->skip)
return;
rd1 = RDCOST(x->rdmult, x->rddiv, args->rate, args->dist);
rd2 = RDCOST(x->rdmult, x->rddiv, 0, args->sse);
rd = MIN(rd1, rd2);
if (rd > args->best_rd) {
args->skip = 1;
args->rate = INT_MAX;
args->dist = INT64_MAX;
args->sse = INT64_MAX;
return;
}
if (!is_inter_block(&xd->mode_info_context->mbmi))
vp9_encode_block_intra(plane, block, plane_bsize, tx_size, &encode_args);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
else
vp9_xform_quant(plane, block, plane_bsize, tx_size, &encode_args);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
dist_block(plane, block, tx_size, args);
rate_block(plane, block, plane_bsize, tx_size, args);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
static void txfm_rd_in_plane(MACROBLOCK *x,
int *rate, int64_t *distortion,
int *skippable, int64_t *sse,
int64_t ref_best_rd, int plane,
BLOCK_SIZE bsize, TX_SIZE tx_size) {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
MACROBLOCKD *const xd = &x->e_mbd;
struct macroblockd_plane *const pd = &xd->plane[plane];
const BLOCK_SIZE bs = get_plane_block_size(bsize, pd);
const int num_4x4_blocks_wide = num_4x4_blocks_wide_lookup[bs];
const int num_4x4_blocks_high = num_4x4_blocks_high_lookup[bs];
int i;
struct rdcost_block_args args = { x, { 0 }, { 0 }, tx_size,
num_4x4_blocks_wide, num_4x4_blocks_high,
0, 0, 0, ref_best_rd, 0 };
if (plane == 0)
xd->mode_info_context->mbmi.tx_size = tx_size;
switch (tx_size) {
case TX_4X4:
vpx_memcpy(&args.t_above, pd->above_context,
sizeof(ENTROPY_CONTEXT) * num_4x4_blocks_wide);
vpx_memcpy(&args.t_left, pd->left_context,
sizeof(ENTROPY_CONTEXT) * num_4x4_blocks_high);
get_scan_nb_4x4(get_tx_type_4x4(pd->plane_type, xd, 0),
&args.scan, &args.nb);
break;
case TX_8X8:
for (i = 0; i < num_4x4_blocks_wide; i += 2)
args.t_above[i] = !!*(uint16_t *)&pd->above_context[i];
for (i = 0; i < num_4x4_blocks_high; i += 2)
args.t_left[i] = !!*(uint16_t *)&pd->left_context[i];
get_scan_nb_8x8(get_tx_type_8x8(pd->plane_type, xd),
&args.scan, &args.nb);
break;
case TX_16X16:
for (i = 0; i < num_4x4_blocks_wide; i += 4)
args.t_above[i] = !!*(uint32_t *)&pd->above_context[i];
for (i = 0; i < num_4x4_blocks_high; i += 4)
args.t_left[i] = !!*(uint32_t *)&pd->left_context[i];
get_scan_nb_16x16(get_tx_type_16x16(pd->plane_type, xd),
&args.scan, &args.nb);
break;
case TX_32X32:
for (i = 0; i < num_4x4_blocks_wide; i += 8)
args.t_above[i] = !!*(uint64_t *)&pd->above_context[i];
for (i = 0; i < num_4x4_blocks_high; i += 8)
args.t_left[i] = !!*(uint64_t *)&pd->left_context[i];
args.scan = vp9_default_scan_32x32;
args.nb = vp9_default_scan_32x32_neighbors;
break;
default:
assert(0);
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
foreach_transformed_block_in_plane(xd, bsize, plane, block_yrd_txfm, &args);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
*distortion = args.dist;
*rate = args.rate;
*sse = args.sse;
*skippable = vp9_is_skippable_in_plane(xd, bsize, plane) && (!args.skip);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
static void choose_largest_txfm_size(VP9_COMP *cpi, MACROBLOCK *x,
int *rate, int64_t *distortion,
int *skip, int64_t *sse,
int64_t ref_best_rd,
BLOCK_SIZE bs) {
const TX_SIZE max_txfm_size = max_txsize_lookup[bs];
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &x->e_mbd;
MB_MODE_INFO *const mbmi = &xd->mode_info_context->mbmi;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
if (max_txfm_size == TX_32X32 &&
(cm->tx_mode == ALLOW_32X32 ||
cm->tx_mode == TX_MODE_SELECT)) {
mbmi->tx_size = TX_32X32;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
} else if (max_txfm_size >= TX_16X16 &&
(cm->tx_mode == ALLOW_16X16 ||
cm->tx_mode == ALLOW_32X32 ||
cm->tx_mode == TX_MODE_SELECT)) {
mbmi->tx_size = TX_16X16;
} else if (cm->tx_mode != ONLY_4X4) {
mbmi->tx_size = TX_8X8;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
} else {
mbmi->tx_size = TX_4X4;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
txfm_rd_in_plane(x, rate, distortion, skip,
&sse[mbmi->tx_size], ref_best_rd, 0, bs,
mbmi->tx_size);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
cpi->txfm_stepdown_count[0]++;
}
static void choose_txfm_size_from_rd(VP9_COMP *cpi, MACROBLOCK *x,
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
int (*r)[2], int *rate,
int64_t *d, int64_t *distortion,
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
int *s, int *skip,
int64_t tx_cache[TX_MODES],
BLOCK_SIZE bs) {
const TX_SIZE max_tx_size = max_txsize_lookup[bs];
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &x->e_mbd;
MB_MODE_INFO *const mbmi = &xd->mode_info_context->mbmi;
vp9_prob skip_prob = vp9_get_pred_prob_mbskip(cm, xd);
int64_t rd[TX_SIZES][2];
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
int n, m;
int s0, s1;
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
const vp9_prob *tx_probs = get_tx_probs2(xd, &cm->fc.tx_probs);
for (n = TX_4X4; n <= max_tx_size; n++) {
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
r[n][1] = r[n][0];
if (r[n][0] == INT_MAX)
continue;
for (m = 0; m <= n - (n == max_tx_size); m++) {
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
if (m == n)
r[n][1] += vp9_cost_zero(tx_probs[m]);
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
else
r[n][1] += vp9_cost_one(tx_probs[m]);
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
}
}
assert(skip_prob > 0);
s0 = vp9_cost_bit(skip_prob, 0);
s1 = vp9_cost_bit(skip_prob, 1);
for (n = TX_4X4; n <= max_tx_size; n++) {
if (d[n] == INT64_MAX) {
rd[n][0] = rd[n][1] = INT64_MAX;
continue;
}
if (s[n]) {
rd[n][0] = rd[n][1] = RDCOST(x->rdmult, x->rddiv, s1, d[n]);
} else {
rd[n][0] = RDCOST(x->rdmult, x->rddiv, r[n][0] + s0, d[n]);
rd[n][1] = RDCOST(x->rdmult, x->rddiv, r[n][1] + s0, d[n]);
}
}
if (max_tx_size == TX_32X32 &&
(cm->tx_mode == ALLOW_32X32 ||
(cm->tx_mode == TX_MODE_SELECT &&
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
rd[TX_32X32][1] < rd[TX_16X16][1] && rd[TX_32X32][1] < rd[TX_8X8][1] &&
rd[TX_32X32][1] < rd[TX_4X4][1]))) {
mbmi->tx_size = TX_32X32;
} else if (max_tx_size >= TX_16X16 &&
(cm->tx_mode == ALLOW_16X16 ||
cm->tx_mode == ALLOW_32X32 ||
(cm->tx_mode == TX_MODE_SELECT &&
rd[TX_16X16][1] < rd[TX_8X8][1] &&
rd[TX_16X16][1] < rd[TX_4X4][1]))) {
mbmi->tx_size = TX_16X16;
} else if (cm->tx_mode == ALLOW_8X8 ||
cm->tx_mode == ALLOW_16X16 ||
cm->tx_mode == ALLOW_32X32 ||
(cm->tx_mode == TX_MODE_SELECT && rd[TX_8X8][1] < rd[TX_4X4][1])) {
mbmi->tx_size = TX_8X8;
} else {
mbmi->tx_size = TX_4X4;
}
*distortion = d[mbmi->tx_size];
*rate = r[mbmi->tx_size][cm->tx_mode == TX_MODE_SELECT];
*skip = s[mbmi->tx_size];
tx_cache[ONLY_4X4] = rd[TX_4X4][0];
tx_cache[ALLOW_8X8] = rd[TX_8X8][0];
tx_cache[ALLOW_16X16] = rd[MIN(max_tx_size, TX_16X16)][0];
tx_cache[ALLOW_32X32] = rd[MIN(max_tx_size, TX_32X32)][0];
if (max_tx_size == TX_32X32 &&
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
rd[TX_32X32][1] < rd[TX_16X16][1] && rd[TX_32X32][1] < rd[TX_8X8][1] &&
rd[TX_32X32][1] < rd[TX_4X4][1])
tx_cache[TX_MODE_SELECT] = rd[TX_32X32][1];
else if (max_tx_size >= TX_16X16 &&
rd[TX_16X16][1] < rd[TX_8X8][1] && rd[TX_16X16][1] < rd[TX_4X4][1])
tx_cache[TX_MODE_SELECT] = rd[TX_16X16][1];
else
tx_cache[TX_MODE_SELECT] = rd[TX_4X4][1] < rd[TX_8X8][1] ?
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
rd[TX_4X4][1] : rd[TX_8X8][1];
if (max_tx_size == TX_32X32 &&
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
rd[TX_32X32][1] < rd[TX_16X16][1] &&
rd[TX_32X32][1] < rd[TX_8X8][1] &&
rd[TX_32X32][1] < rd[TX_4X4][1]) {
cpi->txfm_stepdown_count[0]++;
} else if (max_tx_size >= TX_16X16 &&
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
rd[TX_16X16][1] < rd[TX_8X8][1] &&
rd[TX_16X16][1] < rd[TX_4X4][1]) {
cpi->txfm_stepdown_count[max_tx_size - TX_16X16]++;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
} else if (rd[TX_8X8][1] < rd[TX_4X4][1]) {
cpi->txfm_stepdown_count[max_tx_size - TX_8X8]++;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
} else {
cpi->txfm_stepdown_count[max_tx_size - TX_4X4]++;
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
static void choose_txfm_size_from_modelrd(VP9_COMP *cpi, MACROBLOCK *x,
int (*r)[2], int *rate,
int64_t *d, int64_t *distortion,
int *s, int *skip, int64_t *sse,
int64_t ref_best_rd,
BLOCK_SIZE bs) {
const TX_SIZE max_txfm_size = max_txsize_lookup[bs];
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &x->e_mbd;
MB_MODE_INFO *const mbmi = &xd->mode_info_context->mbmi;
vp9_prob skip_prob = vp9_get_pred_prob_mbskip(cm, xd);
int64_t rd[TX_SIZES][2];
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
int n, m;
int s0, s1;
double scale_rd[TX_SIZES] = {1.73, 1.44, 1.20, 1.00};
// double scale_r[TX_SIZES] = {2.82, 2.00, 1.41, 1.00};
const vp9_prob *tx_probs = get_tx_probs2(xd, &cm->fc.tx_probs);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
// for (n = TX_4X4; n <= max_txfm_size; n++)
// r[n][0] = (r[n][0] * scale_r[n]);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
for (n = TX_4X4; n <= max_txfm_size; n++) {
r[n][1] = r[n][0];
for (m = 0; m <= n - (n == max_txfm_size); m++) {
if (m == n)
r[n][1] += vp9_cost_zero(tx_probs[m]);
else
r[n][1] += vp9_cost_one(tx_probs[m]);
}
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
assert(skip_prob > 0);
s0 = vp9_cost_bit(skip_prob, 0);
s1 = vp9_cost_bit(skip_prob, 1);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
for (n = TX_4X4; n <= max_txfm_size; n++) {
if (s[n]) {
rd[n][0] = rd[n][1] = RDCOST(x->rdmult, x->rddiv, s1, d[n]);
} else {
rd[n][0] = RDCOST(x->rdmult, x->rddiv, r[n][0] + s0, d[n]);
rd[n][1] = RDCOST(x->rdmult, x->rddiv, r[n][1] + s0, d[n]);
}
}
for (n = TX_4X4; n <= max_txfm_size; n++) {
rd[n][0] = (scale_rd[n] * rd[n][0]);
rd[n][1] = (scale_rd[n] * rd[n][1]);
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
if (max_txfm_size == TX_32X32 &&
(cm->tx_mode == ALLOW_32X32 ||
(cm->tx_mode == TX_MODE_SELECT &&
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
rd[TX_32X32][1] <= rd[TX_16X16][1] &&
rd[TX_32X32][1] <= rd[TX_8X8][1] &&
rd[TX_32X32][1] <= rd[TX_4X4][1]))) {
mbmi->tx_size = TX_32X32;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
} else if (max_txfm_size >= TX_16X16 &&
(cm->tx_mode == ALLOW_16X16 ||
cm->tx_mode == ALLOW_32X32 ||
(cm->tx_mode == TX_MODE_SELECT &&
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
rd[TX_16X16][1] <= rd[TX_8X8][1] &&
rd[TX_16X16][1] <= rd[TX_4X4][1]))) {
mbmi->tx_size = TX_16X16;
} else if (cm->tx_mode == ALLOW_8X8 ||
cm->tx_mode == ALLOW_16X16 ||
cm->tx_mode == ALLOW_32X32 ||
(cm->tx_mode == TX_MODE_SELECT &&
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
rd[TX_8X8][1] <= rd[TX_4X4][1])) {
mbmi->tx_size = TX_8X8;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
} else {
mbmi->tx_size = TX_4X4;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
// Actually encode using the chosen mode if a model was used, but do not
// update the r, d costs
txfm_rd_in_plane(x, rate, distortion, skip, &sse[mbmi->tx_size],
ref_best_rd, 0, bs, mbmi->tx_size);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
if (max_txfm_size == TX_32X32 &&
rd[TX_32X32][1] <= rd[TX_16X16][1] &&
rd[TX_32X32][1] <= rd[TX_8X8][1] &&
rd[TX_32X32][1] <= rd[TX_4X4][1]) {
cpi->txfm_stepdown_count[0]++;
} else if (max_txfm_size >= TX_16X16 &&
rd[TX_16X16][1] <= rd[TX_8X8][1] &&
rd[TX_16X16][1] <= rd[TX_4X4][1]) {
cpi->txfm_stepdown_count[max_txfm_size - TX_16X16]++;
} else if (rd[TX_8X8][1] <= rd[TX_4X4][1]) {
cpi->txfm_stepdown_count[max_txfm_size - TX_8X8]++;
} else {
cpi->txfm_stepdown_count[max_txfm_size - TX_4X4]++;
}
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
}
static void super_block_yrd(VP9_COMP *cpi,
MACROBLOCK *x, int *rate, int64_t *distortion,
int *skip, int64_t *psse, BLOCK_SIZE bs,
int64_t txfm_cache[TX_MODES],
int64_t ref_best_rd) {
int r[TX_SIZES][2], s[TX_SIZES];
int64_t d[TX_SIZES], sse[TX_SIZES];
MACROBLOCKD *xd = &x->e_mbd;
MB_MODE_INFO *const mbmi = &xd->mode_info_context->mbmi;
assert(bs == mbmi->sb_type);
if (mbmi->ref_frame[0] > INTRA_FRAME)
vp9_subtract_sby(x, bs);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
if (cpi->sf.tx_size_search_method == USE_LARGESTALL ||
(cpi->sf.tx_size_search_method != USE_FULL_RD &&
mbmi->ref_frame[0] == INTRA_FRAME)) {
vpx_memset(txfm_cache, 0, TX_MODES * sizeof(int64_t));
choose_largest_txfm_size(cpi, x, rate, distortion, skip, sse,
ref_best_rd, bs);
if (psse)
*psse = sse[mbmi->tx_size];
return;
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
if (cpi->sf.tx_size_search_method == USE_LARGESTINTRA_MODELINTER &&
mbmi->ref_frame[0] > INTRA_FRAME) {
if (bs >= BLOCK_32X32)
model_rd_for_sb_y_tx(cpi, bs, TX_32X32, x, xd,
&r[TX_32X32][0], &d[TX_32X32], &s[TX_32X32]);
if (bs >= BLOCK_16X16)
model_rd_for_sb_y_tx(cpi, bs, TX_16X16, x, xd,
&r[TX_16X16][0], &d[TX_16X16], &s[TX_16X16]);
model_rd_for_sb_y_tx(cpi, bs, TX_8X8, x, xd,
&r[TX_8X8][0], &d[TX_8X8], &s[TX_8X8]);
model_rd_for_sb_y_tx(cpi, bs, TX_4X4, x, xd,
&r[TX_4X4][0], &d[TX_4X4], &s[TX_4X4]);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
choose_txfm_size_from_modelrd(cpi, x, r, rate, d, distortion, s,
skip, sse, ref_best_rd, bs);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
} else {
if (bs >= BLOCK_32X32)
txfm_rd_in_plane(x, &r[TX_32X32][0], &d[TX_32X32], &s[TX_32X32],
&sse[TX_32X32], ref_best_rd, 0, bs, TX_32X32);
if (bs >= BLOCK_16X16)
txfm_rd_in_plane(x, &r[TX_16X16][0], &d[TX_16X16], &s[TX_16X16],
&sse[TX_16X16], ref_best_rd, 0, bs, TX_16X16);
txfm_rd_in_plane(x, &r[TX_8X8][0], &d[TX_8X8], &s[TX_8X8],
&sse[TX_8X8], ref_best_rd, 0, bs, TX_8X8);
txfm_rd_in_plane(x, &r[TX_4X4][0], &d[TX_4X4], &s[TX_4X4],
&sse[TX_4X4], ref_best_rd, 0, bs, TX_4X4);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
choose_txfm_size_from_rd(cpi, x, r, rate, d, distortion, s,
skip, txfm_cache, bs);
}
if (psse)
*psse = sse[mbmi->tx_size];
}
static int conditional_skipintra(MB_PREDICTION_MODE mode,
MB_PREDICTION_MODE best_intra_mode) {
if (mode == D117_PRED &&
best_intra_mode != V_PRED &&
best_intra_mode != D135_PRED)
return 1;
if (mode == D63_PRED &&
best_intra_mode != V_PRED &&
best_intra_mode != D45_PRED)
return 1;
if (mode == D207_PRED &&
best_intra_mode != H_PRED &&
best_intra_mode != D45_PRED)
return 1;
if (mode == D153_PRED &&
best_intra_mode != H_PRED &&
best_intra_mode != D135_PRED)
return 1;
return 0;
}
static int64_t rd_pick_intra4x4block(VP9_COMP *cpi, MACROBLOCK *x, int ib,
MB_PREDICTION_MODE *best_mode,
int *bmode_costs,
ENTROPY_CONTEXT *a, ENTROPY_CONTEXT *l,
int *bestrate, int *bestratey,
int64_t *bestdistortion,
BLOCK_SIZE bsize, int64_t rd_thresh) {
MB_PREDICTION_MODE mode;
MACROBLOCKD *xd = &x->e_mbd;
int64_t best_rd = rd_thresh;
int rate = 0;
int64_t distortion;
struct macroblock_plane *p = &x->plane[0];
struct macroblockd_plane *pd = &xd->plane[0];
const int src_stride = p->src.stride;
const int dst_stride = pd->dst.stride;
uint8_t *src_init = raster_block_offset_uint8(BLOCK_8X8, ib,
p->src.buf, src_stride);
uint8_t *dst_init = raster_block_offset_uint8(BLOCK_8X8, ib,
pd->dst.buf, dst_stride);
int16_t *src_diff, *coeff;
ENTROPY_CONTEXT ta[2], tempa[2];
ENTROPY_CONTEXT tl[2], templ[2];
TX_TYPE tx_type = DCT_DCT;
const int num_4x4_blocks_wide = num_4x4_blocks_wide_lookup[bsize];
const int num_4x4_blocks_high = num_4x4_blocks_high_lookup[bsize];
int idx, idy, block;
uint8_t best_dst[8 * 8];
assert(ib < 4);
vpx_memcpy(ta, a, sizeof(ta));
vpx_memcpy(tl, l, sizeof(tl));
xd->mode_info_context->mbmi.tx_size = TX_4X4;
for (mode = DC_PRED; mode <= TM_PRED; ++mode) {
int64_t this_rd;
int ratey = 0;
if (!(cpi->sf.intra_y_mode_mask & (1 << mode)))
continue;
// Only do the oblique modes if the best so far is
// one of the neighboring directional modes
if (cpi->sf.mode_search_skip_flags & FLAG_SKIP_INTRA_DIRMISMATCH) {
if (conditional_skipintra(mode, *best_mode))
continue;
}
rate = bmode_costs[mode];
distortion = 0;
vpx_memcpy(tempa, ta, sizeof(ta));
vpx_memcpy(templ, tl, sizeof(tl));
for (idy = 0; idy < num_4x4_blocks_high; ++idy) {
for (idx = 0; idx < num_4x4_blocks_wide; ++idx) {
int64_t ssz;
const int16_t *scan;
uint8_t *src = src_init + idx * 4 + idy * 4 * src_stride;
uint8_t *dst = dst_init + idx * 4 + idy * 4 * dst_stride;
block = ib + idy * 2 + idx;
xd->mode_info_context->bmi[block].as_mode = mode;
src_diff = raster_block_offset_int16(BLOCK_8X8, block, p->src_diff);
coeff = BLOCK_OFFSET(x->plane[0].coeff, block);
vp9_predict_intra_block(xd, block, 1,
TX_4X4, mode,
x->skip_encode ? src : dst,
x->skip_encode ? src_stride : dst_stride,
dst, dst_stride);
vp9_subtract_block(4, 4, src_diff, 8,
src, src_stride,
dst, dst_stride);
tx_type = get_tx_type_4x4(PLANE_TYPE_Y_WITH_DC, xd, block);
if (tx_type != DCT_DCT) {
vp9_short_fht4x4(src_diff, coeff, 8, tx_type);
x->quantize_b_4x4(x, block, tx_type, 16);
} else {
x->fwd_txm4x4(src_diff, coeff, 16);
x->quantize_b_4x4(x, block, tx_type, 16);
}
scan = get_scan_4x4(get_tx_type_4x4(PLANE_TYPE_Y_WITH_DC, xd, block));
ratey += cost_coeffs(x, 0, block,
tempa + idx, templ + idy, TX_4X4, scan,
vp9_get_coef_neighbors_handle(scan));
distortion += vp9_block_error(coeff, BLOCK_OFFSET(pd->dqcoeff, block),
16, &ssz) >> 2;
if (RDCOST(x->rdmult, x->rddiv, ratey, distortion) >= best_rd)
goto next;
if (tx_type != DCT_DCT)
vp9_short_iht4x4_add(BLOCK_OFFSET(pd->dqcoeff, block),
dst, pd->dst.stride, tx_type);
else
xd->inv_txm4x4_add(BLOCK_OFFSET(pd->dqcoeff, block),
dst, pd->dst.stride);
}
}
rate += ratey;
this_rd = RDCOST(x->rdmult, x->rddiv, rate, distortion);
if (this_rd < best_rd) {
*bestrate = rate;
*bestratey = ratey;
*bestdistortion = distortion;
best_rd = this_rd;
*best_mode = mode;
vpx_memcpy(a, tempa, sizeof(tempa));
vpx_memcpy(l, templ, sizeof(templ));
for (idy = 0; idy < num_4x4_blocks_high * 4; ++idy)
vpx_memcpy(best_dst + idy * 8, dst_init + idy * dst_stride,
num_4x4_blocks_wide * 4);
2010-05-18 17:58:33 +02:00
}
next:
{}
}
if (best_rd >= rd_thresh || x->skip_encode)
return best_rd;
for (idy = 0; idy < num_4x4_blocks_high * 4; ++idy)
vpx_memcpy(dst_init + idy * dst_stride, best_dst + idy * 8,
num_4x4_blocks_wide * 4);
2010-05-18 17:58:33 +02:00
return best_rd;
2010-05-18 17:58:33 +02:00
}
static int64_t rd_pick_intra_sub_8x8_y_mode(VP9_COMP * const cpi,
MACROBLOCK * const mb,
int * const rate,
int * const rate_y,
int64_t * const distortion,
int64_t best_rd) {
int i, j;
MACROBLOCKD *const xd = &mb->e_mbd;
const BLOCK_SIZE bsize = xd->mode_info_context->mbmi.sb_type;
const int num_4x4_blocks_wide = num_4x4_blocks_wide_lookup[bsize];
const int num_4x4_blocks_high = num_4x4_blocks_high_lookup[bsize];
int idx, idy;
int cost = 0;
int64_t total_distortion = 0;
int tot_rate_y = 0;
int64_t total_rd = 0;
ENTROPY_CONTEXT t_above[4], t_left[4];
int *bmode_costs;
MODE_INFO *const mic = xd->mode_info_context;
vpx_memcpy(t_above, xd->plane[0].above_context, sizeof(t_above));
vpx_memcpy(t_left, xd->plane[0].left_context, sizeof(t_left));
2010-05-18 17:58:33 +02:00
bmode_costs = mb->mbmode_cost;
// Pick modes for each sub-block (of size 4x4, 4x8, or 8x4) in an 8x8 block.
for (idy = 0; idy < 2; idy += num_4x4_blocks_high) {
for (idx = 0; idx < 2; idx += num_4x4_blocks_wide) {
const int mis = xd->mode_info_stride;
MB_PREDICTION_MODE best_mode = DC_PRED;
int r = INT_MAX, ry = INT_MAX;
int64_t d = INT64_MAX, this_rd = INT64_MAX;
i = idy * 2 + idx;
if (cpi->common.frame_type == KEY_FRAME) {
const MB_PREDICTION_MODE A = above_block_mode(mic, i, mis);
const MB_PREDICTION_MODE L = (xd->left_available || idx) ?
left_block_mode(mic, i) : DC_PRED;
bmode_costs = mb->y_mode_costs[A][L];
}
this_rd = rd_pick_intra4x4block(cpi, mb, i, &best_mode, bmode_costs,
t_above + idx, t_left + idy, &r, &ry, &d,
bsize, best_rd - total_rd);
if (this_rd >= best_rd - total_rd)
return INT64_MAX;
total_rd += this_rd;
cost += r;
total_distortion += d;
tot_rate_y += ry;
mic->bmi[i].as_mode = best_mode;
for (j = 1; j < num_4x4_blocks_high; ++j)
mic->bmi[i + j * 2].as_mode = best_mode;
for (j = 1; j < num_4x4_blocks_wide; ++j)
mic->bmi[i + j].as_mode = best_mode;
if (total_rd >= best_rd)
return INT64_MAX;
}
}
2010-05-18 17:58:33 +02:00
*rate = cost;
*rate_y = tot_rate_y;
*distortion = total_distortion;
xd->mode_info_context->mbmi.mode = mic->bmi[3].as_mode;
2010-05-18 17:58:33 +02:00
return RDCOST(mb->rdmult, mb->rddiv, cost, total_distortion);
2010-05-18 17:58:33 +02:00
}
static int64_t rd_pick_intra_sby_mode(VP9_COMP *cpi, MACROBLOCK *x,
int *rate, int *rate_tokenonly,
int64_t *distortion, int *skippable,
BLOCK_SIZE bsize,
int64_t tx_cache[TX_MODES],
int64_t best_rd) {
MB_PREDICTION_MODE mode;
MB_PREDICTION_MODE mode_selected = DC_PRED;
MACROBLOCKD *const xd = &x->e_mbd;
MODE_INFO *const mic = xd->mode_info_context;
int this_rate, this_rate_tokenonly, s;
int64_t this_distortion, this_rd;
TX_SIZE best_tx = TX_4X4;
int i;
int *bmode_costs = x->mbmode_cost;
if (cpi->sf.tx_size_search_method == USE_FULL_RD)
for (i = 0; i < TX_MODES; i++)
tx_cache[i] = INT64_MAX;
/* Y Search for intra prediction mode */
for (mode = DC_PRED; mode <= TM_PRED; mode++) {
int64_t local_tx_cache[TX_MODES];
const int mis = xd->mode_info_stride;
if (!(cpi->sf.intra_y_mode_mask & (1 << mode)))
continue;
if (cpi->common.frame_type == KEY_FRAME) {
const MB_PREDICTION_MODE A = above_block_mode(mic, 0, mis);
const MB_PREDICTION_MODE L = xd->left_available ?
left_block_mode(mic, 0) : DC_PRED;
bmode_costs = x->y_mode_costs[A][L];
}
mic->mbmi.mode = mode;
super_block_yrd(cpi, x, &this_rate_tokenonly, &this_distortion, &s, NULL,
bsize, local_tx_cache, best_rd);
if (this_rate_tokenonly == INT_MAX)
continue;
this_rate = this_rate_tokenonly + bmode_costs[mode];
this_rd = RDCOST(x->rdmult, x->rddiv, this_rate, this_distortion);
if (this_rd < best_rd) {
mode_selected = mode;
best_rd = this_rd;
best_tx = mic->mbmi.tx_size;
*rate = this_rate;
*rate_tokenonly = this_rate_tokenonly;
*distortion = this_distortion;
*skippable = s;
}
if (cpi->sf.tx_size_search_method == USE_FULL_RD && this_rd < INT64_MAX) {
for (i = 0; i < TX_MODES && local_tx_cache[i] < INT64_MAX; i++) {
const int64_t adj_rd = this_rd + local_tx_cache[i] -
local_tx_cache[cpi->common.tx_mode];
if (adj_rd < tx_cache[i]) {
tx_cache[i] = adj_rd;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
}
2010-05-18 17:58:33 +02:00
}
}
2010-05-18 17:58:33 +02:00
mic->mbmi.mode = mode_selected;
mic->mbmi.tx_size = best_tx;
return best_rd;
2010-05-18 17:58:33 +02:00
}
static void super_block_uvrd(VP9_COMMON *const cm, MACROBLOCK *x,
int *rate, int64_t *distortion, int *skippable,
int64_t *sse, BLOCK_SIZE bsize,
int64_t ref_best_rd) {
MACROBLOCKD *const xd = &x->e_mbd;
MB_MODE_INFO *const mbmi = &xd->mode_info_context->mbmi;
TX_SIZE uv_txfm_size = get_uv_tx_size(mbmi);
int plane;
int pnrate = 0, pnskip = 1;
int64_t pndist = 0, pnsse = 0;
if (ref_best_rd < 0)
goto term;
if (is_inter_block(mbmi))
vp9_subtract_sbuv(x, bsize);
*rate = 0;
*distortion = 0;
*sse = 0;
*skippable = 1;
for (plane = 1; plane < MAX_MB_PLANE; ++plane) {
txfm_rd_in_plane(x, &pnrate, &pndist, &pnskip, &pnsse,
ref_best_rd, plane, bsize, uv_txfm_size);
if (pnrate == INT_MAX)
goto term;
*rate += pnrate;
*distortion += pndist;
*sse += pnsse;
*skippable &= pnskip;
}
return;
term:
*rate = INT_MAX;
*distortion = INT64_MAX;
*sse = INT64_MAX;
*skippable = 0;
return;
}
static int64_t rd_pick_intra_sbuv_mode(VP9_COMP *cpi, MACROBLOCK *x,
int *rate, int *rate_tokenonly,
int64_t *distortion, int *skippable,
BLOCK_SIZE bsize) {
MB_PREDICTION_MODE mode;
MB_PREDICTION_MODE mode_selected = DC_PRED;
int64_t best_rd = INT64_MAX, this_rd;
int this_rate_tokenonly, this_rate, s;
int64_t this_distortion, this_sse;
// int mode_mask = (bsize <= BLOCK_8X8)
// ? ALL_INTRA_MODES : cpi->sf.intra_uv_mode_mask;
for (mode = DC_PRED; mode <= TM_PRED; mode++) {
// if (!(mode_mask & (1 << mode)))
if (!(cpi->sf.intra_uv_mode_mask & (1 << mode)))
continue;
x->e_mbd.mode_info_context->mbmi.uv_mode = mode;
super_block_uvrd(&cpi->common, x, &this_rate_tokenonly,
&this_distortion, &s, &this_sse, bsize, best_rd);
if (this_rate_tokenonly == INT_MAX)
continue;
this_rate = this_rate_tokenonly +
x->intra_uv_mode_cost[cpi->common.frame_type][mode];
this_rd = RDCOST(x->rdmult, x->rddiv, this_rate, this_distortion);
if (this_rd < best_rd) {
mode_selected = mode;
best_rd = this_rd;
*rate = this_rate;
*rate_tokenonly = this_rate_tokenonly;
*distortion = this_distortion;
*skippable = s;
}
}
x->e_mbd.mode_info_context->mbmi.uv_mode = mode_selected;
return best_rd;
}
static int64_t rd_sbuv_dcpred(VP9_COMP *cpi, MACROBLOCK *x,
int *rate, int *rate_tokenonly,
int64_t *distortion, int *skippable,
BLOCK_SIZE bsize) {
int64_t this_rd;
int64_t this_sse;
x->e_mbd.mode_info_context->mbmi.uv_mode = DC_PRED;
super_block_uvrd(&cpi->common, x, rate_tokenonly,
distortion, skippable, &this_sse, bsize, INT64_MAX);
*rate = *rate_tokenonly +
x->intra_uv_mode_cost[cpi->common.frame_type][DC_PRED];
this_rd = RDCOST(x->rdmult, x->rddiv, *rate, *distortion);
return this_rd;
}
static void choose_intra_uv_mode(VP9_COMP *cpi, BLOCK_SIZE bsize,
int *rate_uv, int *rate_uv_tokenonly,
int64_t *dist_uv, int *skip_uv,
MB_PREDICTION_MODE *mode_uv) {
MACROBLOCK *const x = &cpi->mb;
// Use an estimated rd for uv_intra based on DC_PRED if the
// appropriate speed flag is set.
if (cpi->sf.use_uv_intra_rd_estimate) {
rd_sbuv_dcpred(cpi, x, rate_uv, rate_uv_tokenonly, dist_uv, skip_uv,
bsize < BLOCK_8X8 ? BLOCK_8X8 : bsize);
// Else do a proper rd search for each possible transform size that may
// be considered in the main rd loop.
} else {
rd_pick_intra_sbuv_mode(cpi, x,
rate_uv, rate_uv_tokenonly, dist_uv, skip_uv,
bsize < BLOCK_8X8 ? BLOCK_8X8 : bsize);
}
*mode_uv = x->e_mbd.mode_info_context->mbmi.uv_mode;
}
static int cost_mv_ref(VP9_COMP *cpi, MB_PREDICTION_MODE mode,
int mode_context) {
MACROBLOCK *const x = &cpi->mb;
MACROBLOCKD *const xd = &x->e_mbd;
const int segment_id = xd->mode_info_context->mbmi.segment_id;
// Don't account for mode here if segment skip is enabled.
if (!vp9_segfeature_active(&cpi->common.seg, segment_id, SEG_LVL_SKIP)) {
assert(is_inter_mode(mode));
return x->inter_mode_cost[mode_context][mode - NEARESTMV];
} else {
return 0;
}
}
void vp9_set_mbmode_and_mvs(MACROBLOCK *x, MB_PREDICTION_MODE mb, int_mv *mv) {
x->e_mbd.mode_info_context->mbmi.mode = mb;
x->e_mbd.mode_info_context->mbmi.mv[0].as_int = mv->as_int;
}
static void joint_motion_search(VP9_COMP *cpi, MACROBLOCK *x,
BLOCK_SIZE bsize,
int_mv *frame_mv,
int mi_row, int mi_col,
int_mv single_newmv[MAX_REF_FRAMES],
int *rate_mv);
static void single_motion_search(VP9_COMP *cpi, MACROBLOCK *x,
BLOCK_SIZE bsize,
int mi_row, int mi_col,
int_mv *tmp_mv, int *rate_mv);
static int labels2mode(MACROBLOCK *x, int i,
MB_PREDICTION_MODE this_mode,
int_mv *this_mv, int_mv *this_second_mv,
int_mv frame_mv[MB_MODE_COUNT][MAX_REF_FRAMES],
int_mv seg_mvs[MAX_REF_FRAMES],
int_mv *best_ref_mv,
int_mv *second_best_ref_mv,
int *mvjcost, int *mvcost[2], VP9_COMP *cpi) {
MACROBLOCKD *const xd = &x->e_mbd;
MODE_INFO *const mic = xd->mode_info_context;
MB_MODE_INFO *mbmi = &mic->mbmi;
int cost = 0, thismvcost = 0;
int idx, idy;
const int num_4x4_blocks_wide = num_4x4_blocks_wide_lookup[mbmi->sb_type];
const int num_4x4_blocks_high = num_4x4_blocks_high_lookup[mbmi->sb_type];
/* We have to be careful retrieving previously-encoded motion vectors.
Ones from this macroblock have to be pulled from the BLOCKD array
as they have not yet made it to the bmi array in our MB_MODE_INFO. */
MB_PREDICTION_MODE m;
// the only time we should do costing for new motion vector or mode
// is when we are on a new label (jbb May 08, 2007)
switch (m = this_mode) {
case NEWMV:
this_mv->as_int = seg_mvs[mbmi->ref_frame[0]].as_int;
thismvcost = vp9_mv_bit_cost(this_mv, best_ref_mv, mvjcost, mvcost,
102);
if (mbmi->ref_frame[1] > 0) {
this_second_mv->as_int = seg_mvs[mbmi->ref_frame[1]].as_int;
thismvcost += vp9_mv_bit_cost(this_second_mv, second_best_ref_mv,
mvjcost, mvcost, 102);
}
break;
case NEARESTMV:
this_mv->as_int = frame_mv[NEARESTMV][mbmi->ref_frame[0]].as_int;
if (mbmi->ref_frame[1] > 0)
this_second_mv->as_int =
frame_mv[NEARESTMV][mbmi->ref_frame[1]].as_int;
break;
case NEARMV:
this_mv->as_int = frame_mv[NEARMV][mbmi->ref_frame[0]].as_int;
if (mbmi->ref_frame[1] > 0)
this_second_mv->as_int =
frame_mv[NEARMV][mbmi->ref_frame[1]].as_int;
break;
case ZEROMV:
this_mv->as_int = 0;
if (mbmi->ref_frame[1] > 0)
this_second_mv->as_int = 0;
break;
default:
break;
}
cost = cost_mv_ref(cpi, this_mode,
mbmi->mode_context[mbmi->ref_frame[0]]);
mic->bmi[i].as_mv[0].as_int = this_mv->as_int;
if (mbmi->ref_frame[1] > 0)
mic->bmi[i].as_mv[1].as_int = this_second_mv->as_int;
x->partition_info->bmi[i].mode = m;
for (idy = 0; idy < num_4x4_blocks_high; ++idy)
for (idx = 0; idx < num_4x4_blocks_wide; ++idx)
vpx_memcpy(&mic->bmi[i + idy * 2 + idx],
&mic->bmi[i], sizeof(mic->bmi[i]));
cost += thismvcost;
return cost;
}
static int64_t encode_inter_mb_segment(VP9_COMP *cpi,
MACROBLOCK *x,
int64_t best_yrd,
int i,
int *labelyrate,
int64_t *distortion, int64_t *sse,
ENTROPY_CONTEXT *ta,
ENTROPY_CONTEXT *tl) {
int k;
MACROBLOCKD *xd = &x->e_mbd;
struct macroblockd_plane *const pd = &xd->plane[0];
MODE_INFO *const mi = xd->mode_info_context;
const BLOCK_SIZE bsize = mi->mbmi.sb_type;
const int width = plane_block_width(bsize, pd);
const int height = plane_block_height(bsize, pd);
int idx, idy;
const int src_stride = x->plane[0].src.stride;
uint8_t* const src = raster_block_offset_uint8(BLOCK_8X8, i,
x->plane[0].src.buf,
src_stride);
int16_t* src_diff = raster_block_offset_int16(BLOCK_8X8, i,
x->plane[0].src_diff);
int16_t* coeff = BLOCK_OFFSET(x->plane[0].coeff, i);
uint8_t* const dst = raster_block_offset_uint8(BLOCK_8X8, i,
pd->dst.buf, pd->dst.stride);
int64_t thisdistortion = 0, thissse = 0;
int thisrate = 0;
int ref, second_ref = has_second_ref(&mi->mbmi);
for (ref = 0; ref < 1 + second_ref; ++ref) {
const uint8_t *pre = raster_block_offset_uint8(BLOCK_8X8, i,
pd->pre[ref].buf, pd->pre[ref].stride);
vp9_build_inter_predictor(pre, pd->pre[ref].stride,
dst, pd->dst.stride,
&mi->bmi[i].as_mv[ref].as_mv,
&xd->scale_factor[ref],
width, height, ref, &xd->subpix, MV_PRECISION_Q3);
}
vp9_subtract_block(height, width, src_diff, 8, src, src_stride,
dst, pd->dst.stride);
k = i;
for (idy = 0; idy < height / 4; ++idy) {
for (idx = 0; idx < width / 4; ++idx) {
int64_t ssz, rd, rd1, rd2;
k += (idy * 2 + idx);
src_diff = raster_block_offset_int16(BLOCK_8X8, k,
x->plane[0].src_diff);
coeff = BLOCK_OFFSET(x->plane[0].coeff, k);
x->fwd_txm4x4(src_diff, coeff, 16);
x->quantize_b_4x4(x, k, DCT_DCT, 16);
thisdistortion += vp9_block_error(coeff, BLOCK_OFFSET(pd->dqcoeff, k),
16, &ssz);
thissse += ssz;
thisrate += cost_coeffs(x, 0, k,
ta + (k & 1),
tl + (k >> 1), TX_4X4,
vp9_default_scan_4x4,
vp9_default_scan_4x4_neighbors);
rd1 = RDCOST(x->rdmult, x->rddiv, thisrate, thisdistortion >> 2);
rd2 = RDCOST(x->rdmult, x->rddiv, 0, thissse >> 2);
rd = MIN(rd1, rd2);
if (rd >= best_yrd)
return INT64_MAX;
}
}
*distortion = thisdistortion >> 2;
*labelyrate = thisrate;
*sse = thissse >> 2;
return RDCOST(x->rdmult, x->rddiv, *labelyrate, *distortion);
}
typedef struct {
int eobs;
int brate;
int byrate;
int64_t bdist;
int64_t bsse;
int64_t brdcost;
int_mv mvs[2];
ENTROPY_CONTEXT ta[2];
ENTROPY_CONTEXT tl[2];
} SEG_RDSTAT;
typedef struct {
int_mv *ref_mv, *second_ref_mv;
int_mv mvp;
int64_t segment_rd;
int r;
int64_t d;
int64_t sse;
int segment_yrate;
MB_PREDICTION_MODE modes[4];
SEG_RDSTAT rdstat[4][INTER_MODES];
int mvthresh;
} BEST_SEG_INFO;
static INLINE int mv_check_bounds(MACROBLOCK *x, int_mv *mv) {
int r = 0;
r |= (mv->as_mv.row >> 3) < x->mv_row_min;
r |= (mv->as_mv.row >> 3) > x->mv_row_max;
r |= (mv->as_mv.col >> 3) < x->mv_col_min;
r |= (mv->as_mv.col >> 3) > x->mv_col_max;
return r;
}
static INLINE void mi_buf_shift(MACROBLOCK *x, int i) {
MB_MODE_INFO *const mbmi = &x->e_mbd.mode_info_context->mbmi;
struct macroblock_plane *const p = &x->plane[0];
struct macroblockd_plane *const pd = &x->e_mbd.plane[0];
p->src.buf = raster_block_offset_uint8(BLOCK_8X8, i, p->src.buf,
p->src.stride);
assert(((intptr_t)pd->pre[0].buf & 0x7) == 0);
pd->pre[0].buf = raster_block_offset_uint8(BLOCK_8X8, i, pd->pre[0].buf,
pd->pre[0].stride);
if (mbmi->ref_frame[1])
pd->pre[1].buf = raster_block_offset_uint8(BLOCK_8X8, i, pd->pre[1].buf,
pd->pre[1].stride);
}
static INLINE void mi_buf_restore(MACROBLOCK *x, struct buf_2d orig_src,
struct buf_2d orig_pre[2]) {
MB_MODE_INFO *mbmi = &x->e_mbd.mode_info_context->mbmi;
x->plane[0].src = orig_src;
x->e_mbd.plane[0].pre[0] = orig_pre[0];
if (mbmi->ref_frame[1])
x->e_mbd.plane[0].pre[1] = orig_pre[1];
}
static void rd_check_segment_txsize(VP9_COMP *cpi, MACROBLOCK *x,
BEST_SEG_INFO *bsi_buf, int filter_idx,
int_mv seg_mvs[4][MAX_REF_FRAMES],
int mi_row, int mi_col) {
int i, j, br = 0, idx, idy;
int64_t bd = 0, block_sse = 0;
MB_PREDICTION_MODE this_mode;
MODE_INFO *mi = x->e_mbd.mode_info_context;
MB_MODE_INFO *const mbmi = &mi->mbmi;
const int label_count = 4;
int64_t this_segment_rd = 0;
int label_mv_thresh;
int segmentyrate = 0;
const BLOCK_SIZE bsize = mbmi->sb_type;
const int num_4x4_blocks_wide = num_4x4_blocks_wide_lookup[bsize];
const int num_4x4_blocks_high = num_4x4_blocks_high_lookup[bsize];
vp9_variance_fn_ptr_t *v_fn_ptr;
ENTROPY_CONTEXT t_above[2], t_left[2];
BEST_SEG_INFO *bsi = bsi_buf + filter_idx;
int mode_idx;
int subpelmv = 1, have_ref = 0;
vpx_memcpy(t_above, x->e_mbd.plane[0].above_context, sizeof(t_above));
vpx_memcpy(t_left, x->e_mbd.plane[0].left_context, sizeof(t_left));
v_fn_ptr = &cpi->fn_ptr[bsize];
// 64 makes this threshold really big effectively
// making it so that we very rarely check mvs on
// segments. setting this to 1 would make mv thresh
// roughly equal to what it is for macroblocks
label_mv_thresh = 1 * bsi->mvthresh / label_count;
// Segmentation method overheads
for (idy = 0; idy < 2; idy += num_4x4_blocks_high) {
for (idx = 0; idx < 2; idx += num_4x4_blocks_wide) {
// TODO(jingning,rbultje): rewrite the rate-distortion optimization
// loop for 4x4/4x8/8x4 block coding. to be replaced with new rd loop
int_mv mode_mv[MB_MODE_COUNT], second_mode_mv[MB_MODE_COUNT];
int_mv frame_mv[MB_MODE_COUNT][MAX_REF_FRAMES];
MB_PREDICTION_MODE mode_selected = ZEROMV;
int64_t best_rd = INT64_MAX;
i = idy * 2 + idx;
frame_mv[ZEROMV][mbmi->ref_frame[0]].as_int = 0;
frame_mv[ZEROMV][mbmi->ref_frame[1]].as_int = 0;
vp9_append_sub8x8_mvs_for_idx(&cpi->common, &x->e_mbd,
&frame_mv[NEARESTMV][mbmi->ref_frame[0]],
&frame_mv[NEARMV][mbmi->ref_frame[0]],
i, 0, mi_row, mi_col);
if (mbmi->ref_frame[1] > 0)
vp9_append_sub8x8_mvs_for_idx(&cpi->common, &x->e_mbd,
&frame_mv[NEARESTMV][mbmi->ref_frame[1]],
&frame_mv[NEARMV][mbmi->ref_frame[1]],
i, 1, mi_row, mi_col);
// search for the best motion vector on this segment
for (this_mode = NEARESTMV; this_mode <= NEWMV; ++this_mode) {
const struct buf_2d orig_src = x->plane[0].src;
struct buf_2d orig_pre[2];
mode_idx = inter_mode_offset(this_mode);
bsi->rdstat[i][mode_idx].brdcost = INT64_MAX;
// if we're near/nearest and mv == 0,0, compare to zeromv
if ((this_mode == NEARMV || this_mode == NEARESTMV ||
this_mode == ZEROMV) &&
frame_mv[this_mode][mbmi->ref_frame[0]].as_int == 0 &&
(mbmi->ref_frame[1] <= 0 ||
frame_mv[this_mode][mbmi->ref_frame[1]].as_int == 0)) {
int rfc = mbmi->mode_context[mbmi->ref_frame[0]];
int c1 = cost_mv_ref(cpi, NEARMV, rfc);
int c2 = cost_mv_ref(cpi, NEARESTMV, rfc);
int c3 = cost_mv_ref(cpi, ZEROMV, rfc);
if (this_mode == NEARMV) {
if (c1 > c3)
continue;
} else if (this_mode == NEARESTMV) {
if (c2 > c3)
continue;
} else {
assert(this_mode == ZEROMV);
if (mbmi->ref_frame[1] <= 0) {
if ((c3 >= c2 &&
frame_mv[NEARESTMV][mbmi->ref_frame[0]].as_int == 0) ||
(c3 >= c1 &&
frame_mv[NEARMV][mbmi->ref_frame[0]].as_int == 0))
continue;
} else {
if ((c3 >= c2 &&
frame_mv[NEARESTMV][mbmi->ref_frame[0]].as_int == 0 &&
frame_mv[NEARESTMV][mbmi->ref_frame[1]].as_int == 0) ||
(c3 >= c1 &&
frame_mv[NEARMV][mbmi->ref_frame[0]].as_int == 0 &&
frame_mv[NEARMV][mbmi->ref_frame[1]].as_int == 0))
continue;
}
}
}
vpx_memcpy(orig_pre, x->e_mbd.plane[0].pre, sizeof(orig_pre));
vpx_memcpy(bsi->rdstat[i][mode_idx].ta, t_above,
sizeof(bsi->rdstat[i][mode_idx].ta));
vpx_memcpy(bsi->rdstat[i][mode_idx].tl, t_left,
sizeof(bsi->rdstat[i][mode_idx].tl));
// motion search for newmv (single predictor case only)
if (mbmi->ref_frame[1] <= 0 && this_mode == NEWMV &&
seg_mvs[i][mbmi->ref_frame[0]].as_int == INVALID_MV) {
int step_param = 0;
int further_steps;
int thissme, bestsme = INT_MAX;
int sadpb = x->sadperbit4;
int_mv mvp_full;
int max_mv;
/* Is the best so far sufficiently good that we cant justify doing
* and new motion search. */
if (best_rd < label_mv_thresh)
break;
if (cpi->compressor_speed) {
// use previous block's result as next block's MV predictor.
if (i > 0) {
bsi->mvp.as_int =
x->e_mbd.mode_info_context->bmi[i - 1].as_mv[0].as_int;
if (i == 2)
bsi->mvp.as_int =
x->e_mbd.mode_info_context->bmi[i - 2].as_mv[0].as_int;
}
}
if (i == 0)
max_mv = x->max_mv_context[mbmi->ref_frame[0]];
else
max_mv = MAX(abs(bsi->mvp.as_mv.row), abs(bsi->mvp.as_mv.col)) >> 3;
if (cpi->sf.auto_mv_step_size && cpi->common.show_frame) {
// Take wtd average of the step_params based on the last frame's
// max mv magnitude and the best ref mvs of the current block for
// the given reference.
step_param = (vp9_init_search_range(cpi, max_mv) +
cpi->mv_step_param) >> 1;
} else {
step_param = cpi->mv_step_param;
}
further_steps = (MAX_MVSEARCH_STEPS - 1) - step_param;
mvp_full.as_mv.row = bsi->mvp.as_mv.row >> 3;
mvp_full.as_mv.col = bsi->mvp.as_mv.col >> 3;
// adjust src pointer for this block
mi_buf_shift(x, i);
if (cpi->sf.search_method == HEX) {
bestsme = vp9_hex_search(x, &mvp_full,
step_param,
sadpb, 1, v_fn_ptr, 1,
bsi->ref_mv, &mode_mv[NEWMV]);
} else if (cpi->sf.search_method == SQUARE) {
bestsme = vp9_square_search(x, &mvp_full,
step_param,
sadpb, 1, v_fn_ptr, 1,
bsi->ref_mv, &mode_mv[NEWMV]);
} else if (cpi->sf.search_method == BIGDIA) {
bestsme = vp9_bigdia_search(x, &mvp_full,
step_param,
sadpb, 1, v_fn_ptr, 1,
bsi->ref_mv, &mode_mv[NEWMV]);
} else {
bestsme = vp9_full_pixel_diamond(cpi, x, &mvp_full, step_param,
sadpb, further_steps, 0, v_fn_ptr,
bsi->ref_mv, &mode_mv[NEWMV]);
}
// Should we do a full search (best quality only)
if (cpi->compressor_speed == 0) {
/* Check if mvp_full is within the range. */
clamp_mv(&mvp_full.as_mv, x->mv_col_min, x->mv_col_max,
x->mv_row_min, x->mv_row_max);
thissme = cpi->full_search_sad(x, &mvp_full,
sadpb, 16, v_fn_ptr,
x->nmvjointcost, x->mvcost,
bsi->ref_mv, i);
if (thissme < bestsme) {
bestsme = thissme;
mode_mv[NEWMV].as_int =
x->e_mbd.mode_info_context->bmi[i].as_mv[0].as_int;
} else {
/* The full search result is actually worse so re-instate the
* previous best vector */
x->e_mbd.mode_info_context->bmi[i].as_mv[0].as_int =
mode_mv[NEWMV].as_int;
}
}
if (bestsme < INT_MAX) {
int distortion;
unsigned int sse;
cpi->find_fractional_mv_step(x, &mode_mv[NEWMV],
bsi->ref_mv, x->errorperbit, v_fn_ptr,
0, cpi->sf.subpel_iters_per_step,
x->nmvjointcost, x->mvcost,
&distortion, &sse);
// safe motion search result for use in compound prediction
seg_mvs[i][mbmi->ref_frame[0]].as_int = mode_mv[NEWMV].as_int;
}
// restore src pointers
mi_buf_restore(x, orig_src, orig_pre);
}
if (mbmi->ref_frame[1] > 0 && this_mode == NEWMV &&
mbmi->interp_filter == EIGHTTAP) {
if (seg_mvs[i][mbmi->ref_frame[1]].as_int == INVALID_MV ||
seg_mvs[i][mbmi->ref_frame[0]].as_int == INVALID_MV)
continue;
// adjust src pointers
mi_buf_shift(x, i);
if (cpi->sf.comp_inter_joint_search_thresh <= bsize) {
int rate_mv;
joint_motion_search(cpi, x, bsize, frame_mv[this_mode],
mi_row, mi_col, seg_mvs[i],
&rate_mv);
seg_mvs[i][mbmi->ref_frame[0]].as_int =
frame_mv[this_mode][mbmi->ref_frame[0]].as_int;
seg_mvs[i][mbmi->ref_frame[1]].as_int =
frame_mv[this_mode][mbmi->ref_frame[1]].as_int;
}
// restore src pointers
mi_buf_restore(x, orig_src, orig_pre);
}
bsi->rdstat[i][mode_idx].brate =
labels2mode(x, i, this_mode, &mode_mv[this_mode],
&second_mode_mv[this_mode], frame_mv, seg_mvs[i],
bsi->ref_mv, bsi->second_ref_mv, x->nmvjointcost,
x->mvcost, cpi);
bsi->rdstat[i][mode_idx].mvs[0].as_int = mode_mv[this_mode].as_int;
if (num_4x4_blocks_wide > 1)
bsi->rdstat[i + 1][mode_idx].mvs[0].as_int =
mode_mv[this_mode].as_int;
if (num_4x4_blocks_high > 1)
bsi->rdstat[i + 2][mode_idx].mvs[0].as_int =
mode_mv[this_mode].as_int;
if (mbmi->ref_frame[1] > 0) {
bsi->rdstat[i][mode_idx].mvs[1].as_int =
second_mode_mv[this_mode].as_int;
if (num_4x4_blocks_wide > 1)
bsi->rdstat[i + 1][mode_idx].mvs[1].as_int =
second_mode_mv[this_mode].as_int;
if (num_4x4_blocks_high > 1)
bsi->rdstat[i + 2][mode_idx].mvs[1].as_int =
second_mode_mv[this_mode].as_int;
}
// Trap vectors that reach beyond the UMV borders
if (mv_check_bounds(x, &mode_mv[this_mode]))
continue;
if (mbmi->ref_frame[1] > 0 &&
mv_check_bounds(x, &second_mode_mv[this_mode]))
continue;
if (filter_idx > 0) {
BEST_SEG_INFO *ref_bsi = bsi_buf;
subpelmv = (mode_mv[this_mode].as_mv.row & 0x0f) ||
(mode_mv[this_mode].as_mv.col & 0x0f);
have_ref = mode_mv[this_mode].as_int ==
ref_bsi->rdstat[i][mode_idx].mvs[0].as_int;
if (mbmi->ref_frame[1] > 0) {
subpelmv |= (second_mode_mv[this_mode].as_mv.row & 0x0f) ||
(second_mode_mv[this_mode].as_mv.col & 0x0f);
have_ref &= second_mode_mv[this_mode].as_int ==
ref_bsi->rdstat[i][mode_idx].mvs[1].as_int;
}
if (filter_idx > 1 && !subpelmv && !have_ref) {
ref_bsi = bsi_buf + 1;
have_ref = mode_mv[this_mode].as_int ==
ref_bsi->rdstat[i][mode_idx].mvs[0].as_int;
if (mbmi->ref_frame[1] > 0) {
have_ref &= second_mode_mv[this_mode].as_int ==
ref_bsi->rdstat[i][mode_idx].mvs[1].as_int;
}
}
if (!subpelmv && have_ref &&
ref_bsi->rdstat[i][mode_idx].brdcost < INT64_MAX) {
vpx_memcpy(&bsi->rdstat[i][mode_idx], &ref_bsi->rdstat[i][mode_idx],
sizeof(SEG_RDSTAT));
if (bsi->rdstat[i][mode_idx].brdcost < best_rd) {
mode_selected = this_mode;
best_rd = bsi->rdstat[i][mode_idx].brdcost;
}
continue;
}
}
bsi->rdstat[i][mode_idx].brdcost =
encode_inter_mb_segment(cpi, x,
bsi->segment_rd - this_segment_rd, i,
&bsi->rdstat[i][mode_idx].byrate,
&bsi->rdstat[i][mode_idx].bdist,
&bsi->rdstat[i][mode_idx].bsse,
bsi->rdstat[i][mode_idx].ta,
bsi->rdstat[i][mode_idx].tl);
if (bsi->rdstat[i][mode_idx].brdcost < INT64_MAX) {
bsi->rdstat[i][mode_idx].brdcost += RDCOST(x->rdmult, x->rddiv,
bsi->rdstat[i][mode_idx].brate, 0);
bsi->rdstat[i][mode_idx].brate += bsi->rdstat[i][mode_idx].byrate;
bsi->rdstat[i][mode_idx].eobs = x->e_mbd.plane[0].eobs[i];
}
if (bsi->rdstat[i][mode_idx].brdcost < best_rd) {
mode_selected = this_mode;
best_rd = bsi->rdstat[i][mode_idx].brdcost;
}
} /*for each 4x4 mode*/
if (best_rd == INT64_MAX) {
int iy, midx;
for (iy = i + 1; iy < 4; ++iy)
for (midx = 0; midx < INTER_MODES; ++midx)
bsi->rdstat[iy][midx].brdcost = INT64_MAX;
bsi->segment_rd = INT64_MAX;
return;
}
mode_idx = inter_mode_offset(mode_selected);
vpx_memcpy(t_above, bsi->rdstat[i][mode_idx].ta, sizeof(t_above));
vpx_memcpy(t_left, bsi->rdstat[i][mode_idx].tl, sizeof(t_left));
labels2mode(x, i, mode_selected, &mode_mv[mode_selected],
&second_mode_mv[mode_selected], frame_mv, seg_mvs[i],
bsi->ref_mv, bsi->second_ref_mv, x->nmvjointcost,
x->mvcost, cpi);
br += bsi->rdstat[i][mode_idx].brate;
bd += bsi->rdstat[i][mode_idx].bdist;
block_sse += bsi->rdstat[i][mode_idx].bsse;
segmentyrate += bsi->rdstat[i][mode_idx].byrate;
this_segment_rd += bsi->rdstat[i][mode_idx].brdcost;
if (this_segment_rd > bsi->segment_rd) {
int iy, midx;
for (iy = i + 1; iy < 4; ++iy)
for (midx = 0; midx < INTER_MODES; ++midx)
bsi->rdstat[iy][midx].brdcost = INT64_MAX;
bsi->segment_rd = INT64_MAX;
return;
}
for (j = 1; j < num_4x4_blocks_high; ++j)
vpx_memcpy(&x->partition_info->bmi[i + j * 2],
&x->partition_info->bmi[i],
sizeof(x->partition_info->bmi[i]));
for (j = 1; j < num_4x4_blocks_wide; ++j)
vpx_memcpy(&x->partition_info->bmi[i + j],
&x->partition_info->bmi[i],
sizeof(x->partition_info->bmi[i]));
}
} /* for each label */
bsi->r = br;
bsi->d = bd;
bsi->segment_yrate = segmentyrate;
bsi->segment_rd = this_segment_rd;
bsi->sse = block_sse;
// update the coding decisions
for (i = 0; i < 4; ++i)
bsi->modes[i] = x->partition_info->bmi[i].mode;
}
static int64_t rd_pick_best_mbsegmentation(VP9_COMP *cpi, MACROBLOCK *x,
int_mv *best_ref_mv,
int_mv *second_best_ref_mv,
int64_t best_rd,
int *returntotrate,
int *returnyrate,
int64_t *returndistortion,
int *skippable, int64_t *psse,
int mvthresh,
int_mv seg_mvs[4][MAX_REF_FRAMES],
BEST_SEG_INFO *bsi_buf,
int filter_idx,
int mi_row, int mi_col) {
int i;
BEST_SEG_INFO *bsi = bsi_buf + filter_idx;
MACROBLOCKD *xd = &x->e_mbd;
MODE_INFO *mi = xd->mode_info_context;
MB_MODE_INFO *mbmi = &mi->mbmi;
int mode_idx;
vp9_zero(*bsi);
bsi->segment_rd = best_rd;
bsi->ref_mv = best_ref_mv;
bsi->second_ref_mv = second_best_ref_mv;
bsi->mvp.as_int = best_ref_mv->as_int;
bsi->mvthresh = mvthresh;
for (i = 0; i < 4; i++)
bsi->modes[i] = ZEROMV;
rd_check_segment_txsize(cpi, x, bsi_buf, filter_idx, seg_mvs, mi_row, mi_col);
if (bsi->segment_rd > best_rd)
return INT64_MAX;
/* set it to the best */
for (i = 0; i < 4; i++) {
mode_idx = inter_mode_offset(bsi->modes[i]);
mi->bmi[i].as_mv[0].as_int = bsi->rdstat[i][mode_idx].mvs[0].as_int;
if (mbmi->ref_frame[1] > 0)
mi->bmi[i].as_mv[1].as_int = bsi->rdstat[i][mode_idx].mvs[1].as_int;
xd->plane[0].eobs[i] = bsi->rdstat[i][mode_idx].eobs;
x->partition_info->bmi[i].mode = bsi->modes[i];
}
/*
* used to set mbmi->mv.as_int
*/
*returntotrate = bsi->r;
*returndistortion = bsi->d;
*returnyrate = bsi->segment_yrate;
*skippable = vp9_is_skippable_in_plane(&x->e_mbd, BLOCK_8X8, 0);
*psse = bsi->sse;
mbmi->mode = bsi->modes[3];
return bsi->segment_rd;
2010-05-18 17:58:33 +02:00
}
static void mv_pred(VP9_COMP *cpi, MACROBLOCK *x,
uint8_t *ref_y_buffer, int ref_y_stride,
int ref_frame, BLOCK_SIZE block_size ) {
MACROBLOCKD *xd = &x->e_mbd;
MB_MODE_INFO *mbmi = &xd->mode_info_context->mbmi;
int_mv this_mv;
int i;
int zero_seen = 0;
int best_index = 0;
int best_sad = INT_MAX;
int this_sad = INT_MAX;
unsigned int max_mv = 0;
uint8_t *src_y_ptr = x->plane[0].src.buf;
uint8_t *ref_y_ptr;
int row_offset, col_offset;
// Get the sad for each candidate reference mv
for (i = 0; i < MAX_MV_REF_CANDIDATES; i++) {
this_mv.as_int = mbmi->ref_mvs[ref_frame][i].as_int;
2010-05-18 17:58:33 +02:00
max_mv = MAX(max_mv,
MAX(abs(this_mv.as_mv.row), abs(this_mv.as_mv.col)) >> 3);
// The list is at an end if we see 0 for a second time.
if (!this_mv.as_int && zero_seen)
break;
zero_seen = zero_seen || !this_mv.as_int;
row_offset = this_mv.as_mv.row >> 3;
col_offset = this_mv.as_mv.col >> 3;
ref_y_ptr = ref_y_buffer + (ref_y_stride * row_offset) + col_offset;
2010-05-18 17:58:33 +02:00
// Find sad for current vector.
this_sad = cpi->fn_ptr[block_size].sdf(src_y_ptr, x->plane[0].src.stride,
ref_y_ptr, ref_y_stride,
0x7fffffff);
2010-05-18 17:58:33 +02:00
// Note if it is the best so far.
if (this_sad < best_sad) {
best_sad = this_sad;
best_index = i;
}
}
2010-05-18 17:58:33 +02:00
// Note the index of the mv that worked best in the reference list.
x->mv_best_ref_index[ref_frame] = best_index;
x->max_mv_context[ref_frame] = max_mv;
2010-05-18 17:58:33 +02:00
}
static void estimate_ref_frame_costs(VP9_COMP *cpi, int segment_id,
unsigned int *ref_costs_single,
unsigned int *ref_costs_comp,
vp9_prob *comp_mode_p) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &cpi->mb.e_mbd;
int seg_ref_active = vp9_segfeature_active(&cm->seg, segment_id,
SEG_LVL_REF_FRAME);
if (seg_ref_active) {
vpx_memset(ref_costs_single, 0, MAX_REF_FRAMES * sizeof(*ref_costs_single));
vpx_memset(ref_costs_comp, 0, MAX_REF_FRAMES * sizeof(*ref_costs_comp));
*comp_mode_p = 128;
} else {
vp9_prob intra_inter_p = vp9_get_pred_prob_intra_inter(cm, xd);
vp9_prob comp_inter_p = 128;
if (cm->comp_pred_mode == HYBRID_PREDICTION) {
comp_inter_p = vp9_get_pred_prob_comp_inter_inter(cm, xd);
*comp_mode_p = comp_inter_p;
} else {
*comp_mode_p = 128;
}
ref_costs_single[INTRA_FRAME] = vp9_cost_bit(intra_inter_p, 0);
if (cm->comp_pred_mode != COMP_PREDICTION_ONLY) {
vp9_prob ref_single_p1 = vp9_get_pred_prob_single_ref_p1(cm, xd);
vp9_prob ref_single_p2 = vp9_get_pred_prob_single_ref_p2(cm, xd);
unsigned int base_cost = vp9_cost_bit(intra_inter_p, 1);
if (cm->comp_pred_mode == HYBRID_PREDICTION)
base_cost += vp9_cost_bit(comp_inter_p, 0);
ref_costs_single[LAST_FRAME] = ref_costs_single[GOLDEN_FRAME] =
ref_costs_single[ALTREF_FRAME] = base_cost;
ref_costs_single[LAST_FRAME] += vp9_cost_bit(ref_single_p1, 0);
ref_costs_single[GOLDEN_FRAME] += vp9_cost_bit(ref_single_p1, 1);
ref_costs_single[ALTREF_FRAME] += vp9_cost_bit(ref_single_p1, 1);
ref_costs_single[GOLDEN_FRAME] += vp9_cost_bit(ref_single_p2, 0);
ref_costs_single[ALTREF_FRAME] += vp9_cost_bit(ref_single_p2, 1);
} else {
ref_costs_single[LAST_FRAME] = 512;
ref_costs_single[GOLDEN_FRAME] = 512;
ref_costs_single[ALTREF_FRAME] = 512;
}
if (cm->comp_pred_mode != SINGLE_PREDICTION_ONLY) {
vp9_prob ref_comp_p = vp9_get_pred_prob_comp_ref_p(cm, xd);
unsigned int base_cost = vp9_cost_bit(intra_inter_p, 1);
if (cm->comp_pred_mode == HYBRID_PREDICTION)
base_cost += vp9_cost_bit(comp_inter_p, 1);
ref_costs_comp[LAST_FRAME] = base_cost + vp9_cost_bit(ref_comp_p, 0);
ref_costs_comp[GOLDEN_FRAME] = base_cost + vp9_cost_bit(ref_comp_p, 1);
} else {
ref_costs_comp[LAST_FRAME] = 512;
ref_costs_comp[GOLDEN_FRAME] = 512;
}
}
}
static void store_coding_context(MACROBLOCK *x, PICK_MODE_CONTEXT *ctx,
int mode_index,
PARTITION_INFO *partition,
int_mv *ref_mv,
int_mv *second_ref_mv,
int64_t comp_pred_diff[NB_PREDICTION_TYPES],
int64_t tx_size_diff[TX_MODES],
int64_t best_filter_diff[SWITCHABLE_FILTERS + 1]) {
MACROBLOCKD *const xd = &x->e_mbd;
// Take a snapshot of the coding context so it can be
// restored if we decide to encode this way
ctx->skip = x->skip;
ctx->best_mode_index = mode_index;
ctx->mic = *xd->mode_info_context;
if (partition)
ctx->partition_info = *partition;
ctx->best_ref_mv.as_int = ref_mv->as_int;
ctx->second_best_ref_mv.as_int = second_ref_mv->as_int;
ctx->single_pred_diff = (int)comp_pred_diff[SINGLE_PREDICTION_ONLY];
ctx->comp_pred_diff = (int)comp_pred_diff[COMP_PREDICTION_ONLY];
ctx->hybrid_pred_diff = (int)comp_pred_diff[HYBRID_PREDICTION];
// FIXME(rbultje) does this memcpy the whole array? I believe sizeof()
// doesn't actually work this way
memcpy(ctx->tx_rd_diff, tx_size_diff, sizeof(ctx->tx_rd_diff));
memcpy(ctx->best_filter_diff, best_filter_diff,
sizeof(*best_filter_diff) * (SWITCHABLE_FILTERS + 1));
}
static void setup_pred_block(const MACROBLOCKD *xd,
struct buf_2d dst[MAX_MB_PLANE],
const YV12_BUFFER_CONFIG *src,
int mi_row, int mi_col,
const struct scale_factors *scale,
const struct scale_factors *scale_uv) {
int i;
dst[0].buf = src->y_buffer;
dst[0].stride = src->y_stride;
dst[1].buf = src->u_buffer;
dst[2].buf = src->v_buffer;
dst[1].stride = dst[2].stride = src->uv_stride;
#if CONFIG_ALPHA
dst[3].buf = src->alpha_buffer;
dst[3].stride = src->alpha_stride;
#endif
// TODO(jkoleszar): Make scale factors per-plane data
for (i = 0; i < MAX_MB_PLANE; i++) {
setup_pred_plane(dst + i, dst[i].buf, dst[i].stride, mi_row, mi_col,
i ? scale_uv : scale,
xd->plane[i].subsampling_x, xd->plane[i].subsampling_y);
}
}
static void setup_buffer_inter(VP9_COMP *cpi, MACROBLOCK *x,
int idx, MV_REFERENCE_FRAME frame_type,
BLOCK_SIZE block_size,
int mi_row, int mi_col,
int_mv frame_nearest_mv[MAX_REF_FRAMES],
int_mv frame_near_mv[MAX_REF_FRAMES],
struct buf_2d yv12_mb[4][MAX_MB_PLANE],
struct scale_factors scale[MAX_REF_FRAMES]) {
VP9_COMMON *cm = &cpi->common;
YV12_BUFFER_CONFIG *yv12 = &cm->yv12_fb[cpi->common.ref_frame_map[idx]];
MACROBLOCKD *const xd = &x->e_mbd;
MB_MODE_INFO *const mbmi = &xd->mode_info_context->mbmi;
// set up scaling factors
scale[frame_type] = cpi->common.active_ref_scale[frame_type - 1];
scale[frame_type].x_offset_q4 =
ROUND_POWER_OF_TWO(mi_col * MI_SIZE * scale[frame_type].x_scale_fp,
REF_SCALE_SHIFT) & 0xf;
scale[frame_type].y_offset_q4 =
ROUND_POWER_OF_TWO(mi_row * MI_SIZE * scale[frame_type].y_scale_fp,
REF_SCALE_SHIFT) & 0xf;
// TODO(jkoleszar): Is the UV buffer ever used here? If so, need to make this
// use the UV scaling factors.
setup_pred_block(xd, yv12_mb[frame_type], yv12, mi_row, mi_col,
&scale[frame_type], &scale[frame_type]);
// Gets an initial list of candidate vectors from neighbours and orders them
vp9_find_mv_refs(&cpi->common, xd, xd->mode_info_context,
xd->prev_mode_info_context,
frame_type,
mbmi->ref_mvs[frame_type], mi_row, mi_col);
// Candidate refinement carried out at encoder and decoder
vp9_find_best_ref_mvs(xd,
mbmi->ref_mvs[frame_type],
&frame_nearest_mv[frame_type],
&frame_near_mv[frame_type]);
// Further refinement that is encode side only to test the top few candidates
// in full and choose the best as the centre point for subsequent searches.
// The current implementation doesn't support scaling.
if (!vp9_is_scaled(&scale[frame_type]))
mv_pred(cpi, x, yv12_mb[frame_type][0].buf, yv12->y_stride,
frame_type, block_size);
}
static YV12_BUFFER_CONFIG *get_scaled_ref_frame(VP9_COMP *cpi, int ref_frame) {
YV12_BUFFER_CONFIG *scaled_ref_frame = NULL;
int fb = get_ref_frame_idx(cpi, ref_frame);
int fb_scale = get_scale_ref_frame_idx(cpi, ref_frame);
if (cpi->scaled_ref_idx[fb_scale] != cpi->common.ref_frame_map[fb])
scaled_ref_frame = &cpi->common.yv12_fb[cpi->scaled_ref_idx[fb_scale]];
return scaled_ref_frame;
}
static INLINE int get_switchable_rate(const MACROBLOCK *x) {
const MACROBLOCKD *const xd = &x->e_mbd;
const MB_MODE_INFO *const mbmi = &xd->mode_info_context->mbmi;
const int ctx = vp9_get_pred_context_switchable_interp(xd);
return SWITCHABLE_INTERP_RATE_FACTOR *
x->switchable_interp_costs[ctx][mbmi->interp_filter];
}
static void single_motion_search(VP9_COMP *cpi, MACROBLOCK *x,
BLOCK_SIZE bsize,
int mi_row, int mi_col,
int_mv *tmp_mv, int *rate_mv) {
MACROBLOCKD *xd = &x->e_mbd;
VP9_COMMON *cm = &cpi->common;
MB_MODE_INFO *mbmi = &xd->mode_info_context->mbmi;
struct buf_2d backup_yv12[MAX_MB_PLANE] = {{0}};
int bestsme = INT_MAX;
int further_steps, step_param;
int sadpb = x->sadperbit16;
int_mv mvp_full;
int ref = mbmi->ref_frame[0];
int_mv ref_mv = mbmi->ref_mvs[ref][0];
const BLOCK_SIZE block_size = get_plane_block_size(bsize, &xd->plane[0]);
int tmp_col_min = x->mv_col_min;
int tmp_col_max = x->mv_col_max;
int tmp_row_min = x->mv_row_min;
int tmp_row_max = x->mv_row_max;
YV12_BUFFER_CONFIG *scaled_ref_frame = get_scaled_ref_frame(cpi, ref);
if (scaled_ref_frame) {
int i;
// Swap out the reference frame for a version that's been scaled to
// match the resolution of the current frame, allowing the existing
// motion search code to be used without additional modifications.
for (i = 0; i < MAX_MB_PLANE; i++)
backup_yv12[i] = xd->plane[i].pre[0];
setup_pre_planes(xd, 0, scaled_ref_frame, mi_row, mi_col, NULL);
}
vp9_clamp_mv_min_max(x, &ref_mv.as_mv);
// Adjust search parameters based on small partitions' result.
if (x->fast_ms) {
// && abs(mvp_full.as_mv.row - x->pred_mv.as_mv.row) < 24 &&
// abs(mvp_full.as_mv.col - x->pred_mv.as_mv.col) < 24) {
// adjust search range
step_param = 6;
if (x->fast_ms > 1)
step_param = 8;
// Get prediction MV.
mvp_full.as_int = x->pred_mv.as_int;
// Adjust MV sign if needed.
if (cm->ref_frame_sign_bias[ref]) {
mvp_full.as_mv.col *= -1;
mvp_full.as_mv.row *= -1;
}
} else {
// Work out the size of the first step in the mv step search.
// 0 here is maximum length first step. 1 is MAX >> 1 etc.
if (cpi->sf.auto_mv_step_size && cpi->common.show_frame) {
// Take wtd average of the step_params based on the last frame's
// max mv magnitude and that based on the best ref mvs of the current
// block for the given reference.
step_param = (vp9_init_search_range(cpi, x->max_mv_context[ref]) +
cpi->mv_step_param) >> 1;
} else {
step_param = cpi->mv_step_param;
}
// mvp_full.as_int = ref_mv[0].as_int;
mvp_full.as_int =
mbmi->ref_mvs[ref][x->mv_best_ref_index[ref]].as_int;
}
mvp_full.as_mv.col >>= 3;
mvp_full.as_mv.row >>= 3;
// Further step/diamond searches as necessary
further_steps = (cpi->sf.max_step_search_steps - 1) - step_param;
if (cpi->sf.search_method == HEX) {
bestsme = vp9_hex_search(x, &mvp_full,
step_param,
sadpb, 1,
&cpi->fn_ptr[block_size], 1,
&ref_mv, tmp_mv);
} else if (cpi->sf.search_method == SQUARE) {
bestsme = vp9_square_search(x, &mvp_full,
step_param,
sadpb, 1,
&cpi->fn_ptr[block_size], 1,
&ref_mv, tmp_mv);
} else if (cpi->sf.search_method == BIGDIA) {
bestsme = vp9_bigdia_search(x, &mvp_full,
step_param,
sadpb, 1,
&cpi->fn_ptr[block_size], 1,
&ref_mv, tmp_mv);
} else {
bestsme = vp9_full_pixel_diamond(cpi, x, &mvp_full, step_param,
sadpb, further_steps, 1,
&cpi->fn_ptr[block_size],
&ref_mv, tmp_mv);
}
x->mv_col_min = tmp_col_min;
x->mv_col_max = tmp_col_max;
x->mv_row_min = tmp_row_min;
x->mv_row_max = tmp_row_max;
if (bestsme < INT_MAX) {
int dis; /* TODO: use dis in distortion calculation later. */
unsigned int sse;
cpi->find_fractional_mv_step(x, tmp_mv, &ref_mv,
x->errorperbit,
&cpi->fn_ptr[block_size],
0, cpi->sf.subpel_iters_per_step,
x->nmvjointcost, x->mvcost,
&dis, &sse);
}
*rate_mv = vp9_mv_bit_cost(tmp_mv, &ref_mv,
x->nmvjointcost, x->mvcost,
96);
if (scaled_ref_frame) {
int i;
for (i = 0; i < MAX_MB_PLANE; i++)
xd->plane[i].pre[0] = backup_yv12[i];
}
}
static void joint_motion_search(VP9_COMP *cpi, MACROBLOCK *x,
BLOCK_SIZE bsize,
int_mv *frame_mv,
int mi_row, int mi_col,
int_mv single_newmv[MAX_REF_FRAMES],
int *rate_mv) {
int pw = 4 << b_width_log2(bsize), ph = 4 << b_height_log2(bsize);
MACROBLOCKD *xd = &x->e_mbd;
MB_MODE_INFO *mbmi = &xd->mode_info_context->mbmi;
int refs[2] = { mbmi->ref_frame[0],
(mbmi->ref_frame[1] < 0 ? 0 : mbmi->ref_frame[1]) };
int_mv ref_mv[2];
const BLOCK_SIZE block_size = get_plane_block_size(bsize, &xd->plane[0]);
int ite;
// Prediction buffer from second frame.
uint8_t *second_pred = vpx_memalign(16, pw * ph * sizeof(uint8_t));
// Do joint motion search in compound mode to get more accurate mv.
struct buf_2d backup_yv12[MAX_MB_PLANE] = {{0}};
struct buf_2d backup_second_yv12[MAX_MB_PLANE] = {{0}};
struct buf_2d scaled_first_yv12;
int last_besterr[2] = {INT_MAX, INT_MAX};
YV12_BUFFER_CONFIG *scaled_ref_frame[2] = {NULL, NULL};
scaled_ref_frame[0] = get_scaled_ref_frame(cpi, mbmi->ref_frame[0]);
scaled_ref_frame[1] = get_scaled_ref_frame(cpi, mbmi->ref_frame[1]);
ref_mv[0] = mbmi->ref_mvs[refs[0]][0];
ref_mv[1] = mbmi->ref_mvs[refs[1]][0];
if (scaled_ref_frame[0]) {
int i;
// Swap out the reference frame for a version that's been scaled to
// match the resolution of the current frame, allowing the existing
// motion search code to be used without additional modifications.
for (i = 0; i < MAX_MB_PLANE; i++)
backup_yv12[i] = xd->plane[i].pre[0];
setup_pre_planes(xd, 0, scaled_ref_frame[0], mi_row, mi_col, NULL);
}
if (scaled_ref_frame[1]) {
int i;
for (i = 0; i < MAX_MB_PLANE; i++)
backup_second_yv12[i] = xd->plane[i].pre[1];
setup_pre_planes(xd, 0, scaled_ref_frame[1], mi_row, mi_col, NULL);
}
xd->scale_factor[0].set_scaled_offsets(&xd->scale_factor[0],
mi_row, mi_col);
xd->scale_factor[1].set_scaled_offsets(&xd->scale_factor[1],
mi_row, mi_col);
scaled_first_yv12 = xd->plane[0].pre[0];
// Initialize mv using single prediction mode result.
frame_mv[refs[0]].as_int = single_newmv[refs[0]].as_int;
frame_mv[refs[1]].as_int = single_newmv[refs[1]].as_int;
// Allow joint search multiple times iteratively for each ref frame
// and break out the search loop if it couldn't find better mv.
for (ite = 0; ite < 4; ite++) {
struct buf_2d ref_yv12[2];
int bestsme = INT_MAX;
int sadpb = x->sadperbit16;
int_mv tmp_mv;
int search_range = 3;
int tmp_col_min = x->mv_col_min;
int tmp_col_max = x->mv_col_max;
int tmp_row_min = x->mv_row_min;
int tmp_row_max = x->mv_row_max;
int id = ite % 2;
// Initialized here because of compiler problem in Visual Studio.
ref_yv12[0] = xd->plane[0].pre[0];
ref_yv12[1] = xd->plane[0].pre[1];
// Get pred block from second frame.
vp9_build_inter_predictor(ref_yv12[!id].buf,
ref_yv12[!id].stride,
second_pred, pw,
&frame_mv[refs[!id]].as_mv,
&xd->scale_factor[!id],
pw, ph, 0,
&xd->subpix, MV_PRECISION_Q3);
// Compound motion search on first ref frame.
if (id)
xd->plane[0].pre[0] = ref_yv12[id];
vp9_clamp_mv_min_max(x, &ref_mv[id].as_mv);
// Use mv result from single mode as mvp.
tmp_mv.as_int = frame_mv[refs[id]].as_int;
tmp_mv.as_mv.col >>= 3;
tmp_mv.as_mv.row >>= 3;
// Small-range full-pixel motion search
bestsme = vp9_refining_search_8p_c(x, &tmp_mv, sadpb,
search_range,
&cpi->fn_ptr[block_size],
x->nmvjointcost, x->mvcost,
&ref_mv[id], second_pred,
pw, ph);
x->mv_col_min = tmp_col_min;
x->mv_col_max = tmp_col_max;
x->mv_row_min = tmp_row_min;
x->mv_row_max = tmp_row_max;
if (bestsme < INT_MAX) {
int dis; /* TODO: use dis in distortion calculation later. */
unsigned int sse;
bestsme = cpi->find_fractional_mv_step_comp(
x, &tmp_mv,
&ref_mv[id],
x->errorperbit,
&cpi->fn_ptr[block_size],
0, cpi->sf.subpel_iters_per_step,
x->nmvjointcost, x->mvcost,
&dis, &sse, second_pred,
pw, ph);
}
if (id)
xd->plane[0].pre[0] = scaled_first_yv12;
if (bestsme < last_besterr[id]) {
frame_mv[refs[id]].as_int = tmp_mv.as_int;
last_besterr[id] = bestsme;
} else {
break;
}
}
// restore the predictor
if (scaled_ref_frame[0]) {
int i;
for (i = 0; i < MAX_MB_PLANE; i++)
xd->plane[i].pre[0] = backup_yv12[i];
}
if (scaled_ref_frame[1]) {
int i;
for (i = 0; i < MAX_MB_PLANE; i++)
xd->plane[i].pre[1] = backup_second_yv12[i];
}
*rate_mv = vp9_mv_bit_cost(&frame_mv[refs[0]],
&mbmi->ref_mvs[refs[0]][0],
x->nmvjointcost, x->mvcost, 96);
*rate_mv += vp9_mv_bit_cost(&frame_mv[refs[1]],
&mbmi->ref_mvs[refs[1]][0],
x->nmvjointcost, x->mvcost, 96);
vpx_free(second_pred);
}
static int64_t handle_inter_mode(VP9_COMP *cpi, MACROBLOCK *x,
BLOCK_SIZE bsize,
int64_t txfm_cache[],
int *rate2, int64_t *distortion,
int *skippable,
int *rate_y, int64_t *distortion_y,
int *rate_uv, int64_t *distortion_uv,
int *mode_excluded, int *disable_skip,
INTERPOLATIONFILTERTYPE *best_filter,
int_mv (*mode_mv)[MAX_REF_FRAMES],
int mi_row, int mi_col,
int_mv single_newmv[MAX_REF_FRAMES],
int64_t *psse,
const int64_t ref_best_rd) {
VP9_COMMON *cm = &cpi->common;
MACROBLOCKD *xd = &x->e_mbd;
MB_MODE_INFO *mbmi = &xd->mode_info_context->mbmi;
const int is_comp_pred = (mbmi->ref_frame[1] > 0);
const int num_refs = is_comp_pred ? 2 : 1;
const int this_mode = mbmi->mode;
int_mv *frame_mv = mode_mv[this_mode];
int i;
int refs[2] = { mbmi->ref_frame[0],
(mbmi->ref_frame[1] < 0 ? 0 : mbmi->ref_frame[1]) };
int_mv cur_mv[2];
int64_t this_rd = 0;
DECLARE_ALIGNED_ARRAY(16, uint8_t, tmp_buf, MAX_MB_PLANE * 64 * 64);
int pred_exists = 0;
int intpel_mv;
int64_t rd, best_rd = INT64_MAX;
int best_needs_copy = 0;
uint8_t *orig_dst[MAX_MB_PLANE];
int orig_dst_stride[MAX_MB_PLANE];
int rs = 0;
if (this_mode == NEWMV) {
int rate_mv;
if (is_comp_pred) {
// Initialize mv using single prediction mode result.
frame_mv[refs[0]].as_int = single_newmv[refs[0]].as_int;
frame_mv[refs[1]].as_int = single_newmv[refs[1]].as_int;
if (cpi->sf.comp_inter_joint_search_thresh <= bsize) {
joint_motion_search(cpi, x, bsize, frame_mv,
mi_row, mi_col, single_newmv, &rate_mv);
} else {
rate_mv = vp9_mv_bit_cost(&frame_mv[refs[0]],
&mbmi->ref_mvs[refs[0]][0],
x->nmvjointcost, x->mvcost, 96);
rate_mv += vp9_mv_bit_cost(&frame_mv[refs[1]],
&mbmi->ref_mvs[refs[1]][0],
x->nmvjointcost, x->mvcost, 96);
}
if (frame_mv[refs[0]].as_int == INVALID_MV ||
frame_mv[refs[1]].as_int == INVALID_MV)
return INT64_MAX;
*rate2 += rate_mv;
} else {
int_mv tmp_mv;
single_motion_search(cpi, x, bsize, mi_row, mi_col, &tmp_mv, &rate_mv);
*rate2 += rate_mv;
frame_mv[refs[0]].as_int =
xd->mode_info_context->bmi[0].as_mv[0].as_int = tmp_mv.as_int;
single_newmv[refs[0]].as_int = tmp_mv.as_int;
}
}
// if we're near/nearest and mv == 0,0, compare to zeromv
if ((this_mode == NEARMV || this_mode == NEARESTMV || this_mode == ZEROMV) &&
frame_mv[refs[0]].as_int == 0 &&
!vp9_segfeature_active(&cm->seg, mbmi->segment_id, SEG_LVL_SKIP) &&
(num_refs == 1 || frame_mv[refs[1]].as_int == 0)) {
int rfc = mbmi->mode_context[mbmi->ref_frame[0]];
int c1 = cost_mv_ref(cpi, NEARMV, rfc);
int c2 = cost_mv_ref(cpi, NEARESTMV, rfc);
int c3 = cost_mv_ref(cpi, ZEROMV, rfc);
if (this_mode == NEARMV) {
if (c1 > c3)
return INT64_MAX;
} else if (this_mode == NEARESTMV) {
if (c2 > c3)
return INT64_MAX;
} else {
assert(this_mode == ZEROMV);
if (num_refs == 1) {
if ((c3 >= c2 &&
mode_mv[NEARESTMV][mbmi->ref_frame[0]].as_int == 0) ||
(c3 >= c1 &&
mode_mv[NEARMV][mbmi->ref_frame[0]].as_int == 0))
return INT64_MAX;
} else {
if ((c3 >= c2 &&
mode_mv[NEARESTMV][mbmi->ref_frame[0]].as_int == 0 &&
mode_mv[NEARESTMV][mbmi->ref_frame[1]].as_int == 0) ||
(c3 >= c1 &&
mode_mv[NEARMV][mbmi->ref_frame[0]].as_int == 0 &&
mode_mv[NEARMV][mbmi->ref_frame[1]].as_int == 0))
return INT64_MAX;
}
}
}
for (i = 0; i < num_refs; ++i) {
cur_mv[i] = frame_mv[refs[i]];
// Clip "next_nearest" so that it does not extend to far out of image
if (this_mode != NEWMV)
clamp_mv2(&cur_mv[i].as_mv, xd);
if (mv_check_bounds(x, &cur_mv[i]))
return INT64_MAX;
mbmi->mv[i].as_int = cur_mv[i].as_int;
}
2010-05-18 17:58:33 +02:00
// do first prediction into the destination buffer. Do the next
// prediction into a temporary buffer. Then keep track of which one
// of these currently holds the best predictor, and use the other
// one for future predictions. In the end, copy from tmp_buf to
// dst if necessary.
for (i = 0; i < MAX_MB_PLANE; i++) {
orig_dst[i] = xd->plane[i].dst.buf;
orig_dst_stride[i] = xd->plane[i].dst.stride;
}
/* We don't include the cost of the second reference here, because there
* are only three options: Last/Golden, ARF/Last or Golden/ARF, or in other
* words if you present them in that order, the second one is always known
* if the first is known */
*rate2 += cost_mv_ref(cpi, this_mode,
mbmi->mode_context[mbmi->ref_frame[0]]);
2010-05-18 17:58:33 +02:00
if (!(*mode_excluded)) {
if (is_comp_pred) {
*mode_excluded = (cpi->common.comp_pred_mode == SINGLE_PREDICTION_ONLY);
} else {
*mode_excluded = (cpi->common.comp_pred_mode == COMP_PREDICTION_ONLY);
}
}
pred_exists = 0;
// Are all MVs integer pel for Y and UV
intpel_mv = (mbmi->mv[0].as_mv.row & 15) == 0 &&
(mbmi->mv[0].as_mv.col & 15) == 0;
if (is_comp_pred)
intpel_mv &= (mbmi->mv[1].as_mv.row & 15) == 0 &&
(mbmi->mv[1].as_mv.col & 15) == 0;
// Search for best switchable filter by checking the variance of
// pred error irrespective of whether the filter will be used
if (cm->mcomp_filter_type != BILINEAR) {
*best_filter = EIGHTTAP;
if (x->source_variance <
cpi->sf.disable_filter_search_var_thresh) {
*best_filter = EIGHTTAP;
vp9_zero(cpi->rd_filter_cache);
} else {
int i, newbest;
int tmp_rate_sum = 0;
int64_t tmp_dist_sum = 0;
cpi->rd_filter_cache[SWITCHABLE_FILTERS] = INT64_MAX;
for (i = 0; i < SWITCHABLE_FILTERS; ++i) {
int j;
int64_t rs_rd;
mbmi->interp_filter = i;
vp9_setup_interp_filters(xd, mbmi->interp_filter, cm);
rs = get_switchable_rate(x);
rs_rd = RDCOST(x->rdmult, x->rddiv, rs, 0);
if (i > 0 && intpel_mv) {
cpi->rd_filter_cache[i] = RDCOST(x->rdmult, x->rddiv,
tmp_rate_sum, tmp_dist_sum);
cpi->rd_filter_cache[SWITCHABLE_FILTERS] =
MIN(cpi->rd_filter_cache[SWITCHABLE_FILTERS],
cpi->rd_filter_cache[i] + rs_rd);
rd = cpi->rd_filter_cache[i];
if (cm->mcomp_filter_type == SWITCHABLE)
rd += rs_rd;
} else {
int rate_sum = 0;
int64_t dist_sum = 0;
if ((cm->mcomp_filter_type == SWITCHABLE &&
(!i || best_needs_copy)) ||
(cm->mcomp_filter_type != SWITCHABLE &&
(cm->mcomp_filter_type == mbmi->interp_filter ||
(i == 0 && intpel_mv)))) {
for (j = 0; j < MAX_MB_PLANE; j++) {
xd->plane[j].dst.buf = orig_dst[j];
xd->plane[j].dst.stride = orig_dst_stride[j];
}
} else {
for (j = 0; j < MAX_MB_PLANE; j++) {
xd->plane[j].dst.buf = tmp_buf + j * 64 * 64;
xd->plane[j].dst.stride = 64;
}
}
vp9_build_inter_predictors_sb(xd, mi_row, mi_col, bsize);
model_rd_for_sb(cpi, bsize, x, xd, &rate_sum, &dist_sum);
cpi->rd_filter_cache[i] = RDCOST(x->rdmult, x->rddiv,
rate_sum, dist_sum);
cpi->rd_filter_cache[SWITCHABLE_FILTERS] =
MIN(cpi->rd_filter_cache[SWITCHABLE_FILTERS],
cpi->rd_filter_cache[i] + rs_rd);
rd = cpi->rd_filter_cache[i];
if (cm->mcomp_filter_type == SWITCHABLE)
rd += rs_rd;
if (i == 0 && intpel_mv) {
tmp_rate_sum = rate_sum;
tmp_dist_sum = dist_sum;
}
}
if (i == 0 && cpi->sf.use_rd_breakout && ref_best_rd < INT64_MAX) {
if (rd / 2 > ref_best_rd) {
for (i = 0; i < MAX_MB_PLANE; i++) {
xd->plane[i].dst.buf = orig_dst[i];
xd->plane[i].dst.stride = orig_dst_stride[i];
}
return INT64_MAX;
}
}
newbest = i == 0 || rd < best_rd;
if (newbest) {
best_rd = rd;
*best_filter = mbmi->interp_filter;
if (cm->mcomp_filter_type == SWITCHABLE && i && !intpel_mv)
best_needs_copy = !best_needs_copy;
}
if ((cm->mcomp_filter_type == SWITCHABLE && newbest) ||
(cm->mcomp_filter_type != SWITCHABLE &&
cm->mcomp_filter_type == mbmi->interp_filter)) {
pred_exists = 1;
}
}
for (i = 0; i < MAX_MB_PLANE; i++) {
xd->plane[i].dst.buf = orig_dst[i];
xd->plane[i].dst.stride = orig_dst_stride[i];
}
}
}
// Set the appropriate filter
mbmi->interp_filter = cm->mcomp_filter_type != SWITCHABLE ?
cm->mcomp_filter_type : *best_filter;
vp9_setup_interp_filters(xd, mbmi->interp_filter, cm);
rs = cm->mcomp_filter_type == SWITCHABLE ? get_switchable_rate(x) : 0;
if (pred_exists) {
if (best_needs_copy) {
// again temporarily set the buffers to local memory to prevent a memcpy
for (i = 0; i < MAX_MB_PLANE; i++) {
xd->plane[i].dst.buf = tmp_buf + i * 64 * 64;
xd->plane[i].dst.stride = 64;
}
}
} else {
// Handles the special case when a filter that is not in the
// switchable list (ex. bilinear, 6-tap) is indicated at the frame level
vp9_build_inter_predictors_sb(xd, mi_row, mi_col, bsize);
}
if (cpi->sf.use_rd_breakout && ref_best_rd < INT64_MAX) {
int tmp_rate;
int64_t tmp_dist;
model_rd_for_sb(cpi, bsize, x, xd, &tmp_rate, &tmp_dist);
rd = RDCOST(x->rdmult, x->rddiv, rs + tmp_rate, tmp_dist);
// if current pred_error modeled rd is substantially more than the best
// so far, do not bother doing full rd
if (rd / 2 > ref_best_rd) {
for (i = 0; i < MAX_MB_PLANE; i++) {
xd->plane[i].dst.buf = orig_dst[i];
xd->plane[i].dst.stride = orig_dst_stride[i];
}
return INT64_MAX;
}
}
if (cpi->common.mcomp_filter_type == SWITCHABLE)
*rate2 += get_switchable_rate(x);
if (!is_comp_pred && cpi->enable_encode_breakout) {
if (cpi->active_map_enabled && x->active_ptr[0] == 0)
x->skip = 1;
else if (x->encode_breakout) {
const BLOCK_SIZE y_size = get_plane_block_size(bsize, &xd->plane[0]);
const BLOCK_SIZE uv_size = get_plane_block_size(bsize, &xd->plane[1]);
unsigned int var, sse;
// Skipping threshold for ac.
unsigned int thresh_ac;
// The encode_breakout input
unsigned int encode_breakout = x->encode_breakout << 4;
int max_thresh = 36000;
// Use extreme low threshold for static frames to limit skipping.
if (cpi->enable_encode_breakout == 2)
max_thresh = 128;
// Calculate threshold according to dequant value.
thresh_ac = (xd->plane[0].dequant[1] * xd->plane[0].dequant[1]) / 9;
// Use encode_breakout input if it is bigger than internal threshold.
if (thresh_ac < encode_breakout)
thresh_ac = encode_breakout;
// Set a maximum for threshold to avoid big PSNR loss in low bitrate case.
if (thresh_ac > max_thresh)
thresh_ac = max_thresh;
var = cpi->fn_ptr[y_size].vf(x->plane[0].src.buf, x->plane[0].src.stride,
xd->plane[0].dst.buf,
xd->plane[0].dst.stride, &sse);
// Adjust threshold according to partition size.
thresh_ac >>= 8 - (b_width_log2_lookup[bsize] +
b_height_log2_lookup[bsize]);
// Y skipping condition checking
if (sse < thresh_ac || sse == 0) {
// Skipping threshold for dc
unsigned int thresh_dc;
thresh_dc = (xd->plane[0].dequant[0] * xd->plane[0].dequant[0] >> 6);
// dc skipping checking
if ((sse - var) < thresh_dc || sse == var) {
unsigned int sse_u, sse_v;
unsigned int var_u, var_v;
var_u = cpi->fn_ptr[uv_size].vf(x->plane[1].src.buf,
x->plane[1].src.stride,
xd->plane[1].dst.buf,
xd->plane[1].dst.stride, &sse_u);
// U skipping condition checking
if ((sse_u * 4 < thresh_ac || sse_u == 0) &&
(sse_u - var_u < thresh_dc || sse_u == var_u)) {
var_v = cpi->fn_ptr[uv_size].vf(x->plane[2].src.buf,
x->plane[2].src.stride,
xd->plane[2].dst.buf,
xd->plane[2].dst.stride, &sse_v);
// V skipping condition checking
if ((sse_v * 4 < thresh_ac || sse_v == 0) &&
(sse_v - var_v < thresh_dc || sse_v == var_v)) {
x->skip = 1;
// The cost of skip bit needs to be added.
*rate2 += vp9_cost_bit(vp9_get_pred_prob_mbskip(cm, xd), 1);
// Scaling factor for SSE from spatial domain to frequency domain
// is 16. Adjust distortion accordingly.
*distortion_uv = (sse_u + sse_v) << 4;
*distortion = (sse << 4) + *distortion_uv;
*disable_skip = 1;
this_rd = RDCOST(x->rdmult, x->rddiv, *rate2, *distortion);
}
}
}
}
}
}
if (!x->skip) {
int skippable_y, skippable_uv;
int64_t sseuv = INT64_MAX;
int64_t rdcosty = INT64_MAX;
// Y cost and distortion
super_block_yrd(cpi, x, rate_y, distortion_y, &skippable_y, psse,
bsize, txfm_cache, ref_best_rd);
if (*rate_y == INT_MAX) {
*rate2 = INT_MAX;
*distortion = INT64_MAX;
for (i = 0; i < MAX_MB_PLANE; i++) {
xd->plane[i].dst.buf = orig_dst[i];
xd->plane[i].dst.stride = orig_dst_stride[i];
}
return INT64_MAX;
}
*rate2 += *rate_y;
*distortion += *distortion_y;
rdcosty = RDCOST(x->rdmult, x->rddiv, *rate2, *distortion);
rdcosty = MIN(rdcosty, RDCOST(x->rdmult, x->rddiv, 0, *psse));
super_block_uvrd(cm, x, rate_uv, distortion_uv, &skippable_uv, &sseuv,
bsize, ref_best_rd - rdcosty);
if (*rate_uv == INT_MAX) {
*rate2 = INT_MAX;
*distortion = INT64_MAX;
for (i = 0; i < MAX_MB_PLANE; i++) {
xd->plane[i].dst.buf = orig_dst[i];
xd->plane[i].dst.stride = orig_dst_stride[i];
}
return INT64_MAX;
}
*psse += sseuv;
*rate2 += *rate_uv;
*distortion += *distortion_uv;
*skippable = skippable_y && skippable_uv;
}
for (i = 0; i < MAX_MB_PLANE; i++) {
xd->plane[i].dst.buf = orig_dst[i];
xd->plane[i].dst.stride = orig_dst_stride[i];
}
return this_rd; // if 0, this will be re-calculated by caller
}
void vp9_rd_pick_intra_mode_sb(VP9_COMP *cpi, MACROBLOCK *x,
int *returnrate, int64_t *returndist,
BLOCK_SIZE bsize,
PICK_MODE_CONTEXT *ctx, int64_t best_rd) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &x->e_mbd;
int rate_y = 0, rate_uv = 0, rate_y_tokenonly = 0, rate_uv_tokenonly = 0;
int y_skip = 0, uv_skip;
int64_t dist_y = 0, dist_uv = 0, tx_cache[TX_MODES] = { 0 };
x->skip_encode = 0;
ctx->skip = 0;
xd->mode_info_context->mbmi.ref_frame[0] = INTRA_FRAME;
if (bsize >= BLOCK_8X8) {
if (rd_pick_intra_sby_mode(cpi, x, &rate_y, &rate_y_tokenonly,
&dist_y, &y_skip, bsize, tx_cache,
best_rd) >= best_rd) {
*returnrate = INT_MAX;
return;
}
rd_pick_intra_sbuv_mode(cpi, x, &rate_uv, &rate_uv_tokenonly,
&dist_uv, &uv_skip, bsize);
} else {
y_skip = 0;
if (rd_pick_intra_sub_8x8_y_mode(cpi, x, &rate_y, &rate_y_tokenonly,
&dist_y, best_rd) >= best_rd) {
*returnrate = INT_MAX;
return;
}
rd_pick_intra_sbuv_mode(cpi, x, &rate_uv, &rate_uv_tokenonly,
&dist_uv, &uv_skip, BLOCK_8X8);
}
if (y_skip && uv_skip) {
*returnrate = rate_y + rate_uv - rate_y_tokenonly - rate_uv_tokenonly +
vp9_cost_bit(vp9_get_pred_prob_mbskip(cm, xd), 1);
*returndist = dist_y + dist_uv;
vp9_zero(ctx->tx_rd_diff);
} else {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
int i;
*returnrate = rate_y + rate_uv +
vp9_cost_bit(vp9_get_pred_prob_mbskip(cm, xd), 0);
*returndist = dist_y + dist_uv;
if (cpi->sf.tx_size_search_method == USE_FULL_RD)
for (i = 0; i < TX_MODES; i++)
ctx->tx_rd_diff[i] = tx_cache[i] - tx_cache[cm->tx_mode];
}
ctx->mic = *xd->mode_info_context;
}
int64_t vp9_rd_pick_inter_mode_sb(VP9_COMP *cpi, MACROBLOCK *x,
int mi_row, int mi_col,
int *returnrate,
int64_t *returndistortion,
BLOCK_SIZE bsize,
PICK_MODE_CONTEXT *ctx,
int64_t best_rd_so_far) {
VP9_COMMON *cm = &cpi->common;
MACROBLOCKD *xd = &x->e_mbd;
MB_MODE_INFO *mbmi = &xd->mode_info_context->mbmi;
const struct segmentation *seg = &cm->seg;
const BLOCK_SIZE block_size = get_plane_block_size(bsize, &xd->plane[0]);
RD_PREDICTION_MODE this_mode;
MV_REFERENCE_FRAME ref_frame, second_ref_frame;
unsigned char segment_id = xd->mode_info_context->mbmi.segment_id;
int comp_pred, i;
int_mv frame_mv[MB_MODE_COUNT][MAX_REF_FRAMES];
struct buf_2d yv12_mb[4][MAX_MB_PLANE];
int_mv single_newmv[MAX_REF_FRAMES] = { { 0 } };
static const int flag_list[4] = { 0, VP9_LAST_FLAG, VP9_GOLD_FLAG,
VP9_ALT_FLAG };
int idx_list[4] = {0,
cpi->lst_fb_idx,
cpi->gld_fb_idx,
cpi->alt_fb_idx};
int64_t best_rd = best_rd_so_far;
int64_t best_yrd = best_rd_so_far; // FIXME(rbultje) more precise
int64_t best_tx_rd[TX_MODES];
int64_t best_tx_diff[TX_MODES];
int64_t best_pred_diff[NB_PREDICTION_TYPES];
int64_t best_pred_rd[NB_PREDICTION_TYPES];
int64_t best_filter_rd[SWITCHABLE_FILTERS + 1];
int64_t best_filter_diff[SWITCHABLE_FILTERS + 1];
MB_MODE_INFO best_mbmode = { 0 };
int j;
int mode_index, best_mode_index = 0;
unsigned int ref_costs_single[MAX_REF_FRAMES], ref_costs_comp[MAX_REF_FRAMES];
vp9_prob comp_mode_p;
int64_t best_intra_rd = INT64_MAX;
int64_t best_inter_rd = INT64_MAX;
MB_PREDICTION_MODE best_intra_mode = DC_PRED;
// MB_PREDICTION_MODE best_inter_mode = ZEROMV;
MV_REFERENCE_FRAME best_inter_ref_frame = LAST_FRAME;
INTERPOLATIONFILTERTYPE tmp_best_filter = SWITCHABLE;
int rate_uv_intra[TX_SIZES], rate_uv_tokenonly[TX_SIZES];
int64_t dist_uv[TX_SIZES];
int skip_uv[TX_SIZES];
MB_PREDICTION_MODE mode_uv[TX_SIZES];
struct scale_factors scale_factor[4];
unsigned int ref_frame_mask = 0;
unsigned int mode_mask = 0;
int64_t mode_distortions[MB_MODE_COUNT] = {-1};
int64_t frame_distortions[MAX_REF_FRAMES] = {-1};
int intra_cost_penalty = 20 * vp9_dc_quant(cpi->common.base_qindex,
cpi->common.y_dc_delta_q);
int_mv seg_mvs[4][MAX_REF_FRAMES];
union b_mode_info best_bmodes[4];
PARTITION_INFO best_partition;
const int bws = num_8x8_blocks_wide_lookup[bsize] / 2;
const int bhs = num_8x8_blocks_high_lookup[bsize] / 2;
int best_skip2 = 0;
x->skip_encode = cpi->sf.skip_encode_frame && xd->q_index < QIDX_SKIP_THRESH;
for (i = 0; i < 4; i++) {
int j;
for (j = 0; j < MAX_REF_FRAMES; j++)
seg_mvs[i][j].as_int = INVALID_MV;
}
// Everywhere the flag is set the error is much higher than its neighbors.
ctx->frames_with_high_error = 0;
ctx->modes_with_high_error = 0;
estimate_ref_frame_costs(cpi, segment_id, ref_costs_single, ref_costs_comp,
&comp_mode_p);
for (i = 0; i < NB_PREDICTION_TYPES; ++i)
best_pred_rd[i] = INT64_MAX;
for (i = 0; i < TX_MODES; i++)
best_tx_rd[i] = INT64_MAX;
for (i = 0; i <= SWITCHABLE_FILTERS; i++)
best_filter_rd[i] = INT64_MAX;
for (i = 0; i < TX_SIZES; i++)
rate_uv_intra[i] = INT_MAX;
*returnrate = INT_MAX;
// Create a mask set to 1 for each reference frame used by a smaller
// resolution.
if (cpi->sf.use_avoid_tested_higherror) {
switch (block_size) {
case BLOCK_64X64:
for (i = 0; i < 4; i++) {
for (j = 0; j < 4; j++) {
ref_frame_mask |= x->mb_context[i][j].frames_with_high_error;
mode_mask |= x->mb_context[i][j].modes_with_high_error;
}
}
for (i = 0; i < 4; i++) {
ref_frame_mask |= x->sb32_context[i].frames_with_high_error;
mode_mask |= x->sb32_context[i].modes_with_high_error;
}
break;
case BLOCK_32X32:
for (i = 0; i < 4; i++) {
ref_frame_mask |=
x->mb_context[xd->sb_index][i].frames_with_high_error;
mode_mask |= x->mb_context[xd->sb_index][i].modes_with_high_error;
}
break;
default:
// Until we handle all block sizes set it to present;
ref_frame_mask = 0;
mode_mask = 0;
break;
}
ref_frame_mask = ~ref_frame_mask;
mode_mask = ~mode_mask;
}
for (ref_frame = LAST_FRAME; ref_frame <= ALTREF_FRAME; ref_frame++) {
if (cpi->ref_frame_flags & flag_list[ref_frame]) {
setup_buffer_inter(cpi, x, idx_list[ref_frame], ref_frame, block_size,
mi_row, mi_col, frame_mv[NEARESTMV], frame_mv[NEARMV],
yv12_mb, scale_factor);
}
frame_mv[NEWMV][ref_frame].as_int = INVALID_MV;
frame_mv[ZEROMV][ref_frame].as_int = 0;
}
for (mode_index = 0; mode_index < MAX_MODES; ++mode_index) {
int mode_excluded = 0;
int64_t this_rd = INT64_MAX;
int disable_skip = 0;
int compmode_cost = 0;
int rate2 = 0, rate_y = 0, rate_uv = 0;
int64_t distortion2 = 0, distortion_y = 0, distortion_uv = 0;
int skippable = 0;
int64_t tx_cache[TX_MODES];
int i;
int this_skip2 = 0;
int64_t total_sse = INT_MAX;
int early_term = 0;
for (i = 0; i < TX_MODES; ++i)
tx_cache[i] = INT64_MAX;
x->skip = 0;
this_mode = vp9_mode_order[mode_index].mode;
ref_frame = vp9_mode_order[mode_index].ref_frame;
second_ref_frame = vp9_mode_order[mode_index].second_ref_frame;
// Look at the reference frame of the best mode so far and set the
// skip mask to look at a subset of the remaining modes.
if (mode_index > cpi->sf.mode_skip_start) {
if (mode_index == (cpi->sf.mode_skip_start + 1)) {
switch (vp9_mode_order[best_mode_index].ref_frame) {
case INTRA_FRAME:
cpi->mode_skip_mask = 0;
break;
case LAST_FRAME:
cpi->mode_skip_mask = LAST_FRAME_MODE_MASK;
break;
case GOLDEN_FRAME:
cpi->mode_skip_mask = GOLDEN_FRAME_MODE_MASK;
break;
case ALTREF_FRAME:
cpi->mode_skip_mask = ALT_REF_MODE_MASK;
break;
case NONE:
case MAX_REF_FRAMES:
assert(!"Invalid Reference frame");
}
}
if (cpi->mode_skip_mask & (1 << mode_index))
continue;
}
// Skip if the current reference frame has been masked off
if (cpi->sf.reference_masking && !cpi->set_ref_frame_mask &&
(cpi->ref_frame_mask & (1 << ref_frame)))
continue;
// Test best rd so far against threshold for trying this mode.
if ((best_rd < ((cpi->rd_threshes[bsize][mode_index] *
cpi->rd_thresh_freq_fact[bsize][mode_index]) >> 5)) ||
cpi->rd_threshes[bsize][mode_index] == INT_MAX)
continue;
// Do not allow compound prediction if the segment level reference
// frame feature is in use as in this case there can only be one reference.
if ((second_ref_frame > INTRA_FRAME) &&
vp9_segfeature_active(seg, segment_id, SEG_LVL_REF_FRAME))
continue;
// Skip some checking based on small partitions' result.
if (x->fast_ms > 1 && !ref_frame)
continue;
if (x->fast_ms > 2 && ref_frame != x->subblock_ref)
continue;
if (cpi->sf.use_avoid_tested_higherror && bsize >= BLOCK_8X8) {
if (!(ref_frame_mask & (1 << ref_frame))) {
continue;
}
if (!(mode_mask & (1 << this_mode))) {
continue;
}
if (second_ref_frame != NONE
&& !(ref_frame_mask & (1 << second_ref_frame))) {
continue;
}
}
mbmi->ref_frame[0] = ref_frame;
mbmi->ref_frame[1] = second_ref_frame;
if (!(ref_frame == INTRA_FRAME
|| (cpi->ref_frame_flags & flag_list[ref_frame]))) {
continue;
}
if (!(second_ref_frame == NONE
|| (cpi->ref_frame_flags & flag_list[second_ref_frame]))) {
continue;
}
comp_pred = second_ref_frame > INTRA_FRAME;
if (comp_pred) {
if (cpi->sf.mode_search_skip_flags & FLAG_SKIP_COMP_BESTINTRA)
if (vp9_mode_order[best_mode_index].ref_frame == INTRA_FRAME)
continue;
if (cpi->sf.mode_search_skip_flags & FLAG_SKIP_COMP_REFMISMATCH)
if (ref_frame != best_inter_ref_frame &&
second_ref_frame != best_inter_ref_frame)
continue;
}
// TODO(jingning, jkoleszar): scaling reference frame not supported for
// SPLITMV.
if (ref_frame > 0 &&
vp9_is_scaled(&scale_factor[ref_frame]) &&
this_mode == RD_SPLITMV)
continue;
if (second_ref_frame > 0 &&
vp9_is_scaled(&scale_factor[second_ref_frame]) &&
this_mode == RD_SPLITMV)
continue;
if (bsize >= BLOCK_8X8 &&
(this_mode == RD_I4X4_PRED || this_mode == RD_SPLITMV))
continue;
if (bsize < BLOCK_8X8 &&
!(this_mode == RD_I4X4_PRED || this_mode == RD_SPLITMV))
continue;
set_scale_factors(xd, ref_frame, second_ref_frame, scale_factor);
mbmi->uv_mode = DC_PRED;
// Evaluate all sub-pel filters irrespective of whether we can use
// them for this frame.
mbmi->interp_filter = cm->mcomp_filter_type;
vp9_setup_interp_filters(xd, mbmi->interp_filter, &cpi->common);
if (comp_pred) {
if (!(cpi->ref_frame_flags & flag_list[second_ref_frame]))
continue;
set_scale_factors(xd, ref_frame, second_ref_frame, scale_factor);
mode_excluded = mode_excluded
? mode_excluded
: cm->comp_pred_mode == SINGLE_PREDICTION_ONLY;
} else {
if (ref_frame != INTRA_FRAME && second_ref_frame != INTRA_FRAME) {
mode_excluded =
mode_excluded ?
mode_excluded : cm->comp_pred_mode == COMP_PREDICTION_ONLY;
}
}
// Select prediction reference frames.
for (i = 0; i < MAX_MB_PLANE; i++) {
xd->plane[i].pre[0] = yv12_mb[ref_frame][i];
if (comp_pred)
xd->plane[i].pre[1] = yv12_mb[second_ref_frame][i];
}
// If the segment reference frame feature is enabled....
// then do nothing if the current ref frame is not allowed..
if (vp9_segfeature_active(seg, segment_id, SEG_LVL_REF_FRAME) &&
vp9_get_segdata(seg, segment_id, SEG_LVL_REF_FRAME) !=
(int)ref_frame) {
continue;
// If the segment skip feature is enabled....
// then do nothing if the current mode is not allowed..
} else if (vp9_segfeature_active(seg, segment_id, SEG_LVL_SKIP) &&
(this_mode != RD_ZEROMV && ref_frame != INTRA_FRAME)) {
continue;
// Disable this drop out case if the ref frame
// segment level feature is enabled for this segment. This is to
// prevent the possibility that we end up unable to pick any mode.
} else if (!vp9_segfeature_active(seg, segment_id,
SEG_LVL_REF_FRAME)) {
// Only consider ZEROMV/ALTREF_FRAME for alt ref frame,
// unless ARNR filtering is enabled in which case we want
// an unfiltered alternative. We allow near/nearest as well
// because they may result in zero-zero MVs but be cheaper.
if (cpi->is_src_frame_alt_ref && (cpi->oxcf.arnr_max_frames == 0)) {
if ((this_mode != RD_ZEROMV &&
!(this_mode == RD_NEARMV &&
frame_mv[RD_NEARMV][ALTREF_FRAME].as_int == 0) &&
!(this_mode == RD_NEARESTMV &&
frame_mv[RD_NEARESTMV][ALTREF_FRAME].as_int == 0)) ||
ref_frame != ALTREF_FRAME) {
continue;
}
}
}
// TODO(JBB): This is to make up for the fact that we don't have sad
// functions that work when the block size reads outside the umv. We
// should fix this either by making the motion search just work on
// a representative block in the boundary ( first ) and then implement a
// function that does sads when inside the border..
if (((mi_row + bhs) > cm->mi_rows || (mi_col + bws) > cm->mi_cols) &&
this_mode == RD_NEWMV) {
continue;
}
#ifdef MODE_TEST_HIT_STATS
// TEST/DEBUG CODE
// Keep a rcord of the number of test hits at each size
cpi->mode_test_hits[bsize]++;
#endif
if (this_mode == RD_I4X4_PRED) {
int rate;
/*
if ((cpi->sf.mode_search_skip_flags & FLAG_SKIP_INTRA_BESTINTER) &&
(vp9_mode_order[best_mode_index].ref_frame > INTRA_FRAME))
continue;
*/
// RD_I4X4_PRED is only considered for block sizes less than 8x8.
mbmi->tx_size = TX_4X4;
if (rd_pick_intra_sub_8x8_y_mode(cpi, x, &rate, &rate_y,
&distortion_y, best_rd) >= best_rd)
continue;
rate2 += rate;
rate2 += intra_cost_penalty;
distortion2 += distortion_y;
if (rate_uv_intra[TX_4X4] == INT_MAX) {
choose_intra_uv_mode(cpi, bsize, &rate_uv_intra[TX_4X4],
&rate_uv_tokenonly[TX_4X4],
&dist_uv[TX_4X4], &skip_uv[TX_4X4],
&mode_uv[TX_4X4]);
}
rate2 += rate_uv_intra[TX_4X4];
rate_uv = rate_uv_tokenonly[TX_4X4];
distortion2 += dist_uv[TX_4X4];
distortion_uv = dist_uv[TX_4X4];
mbmi->uv_mode = mode_uv[TX_4X4];
tx_cache[ONLY_4X4] = RDCOST(x->rdmult, x->rddiv, rate2, distortion2);
for (i = 0; i < TX_MODES; ++i)
tx_cache[i] = tx_cache[ONLY_4X4];
} else if (ref_frame == INTRA_FRAME) {
TX_SIZE uv_tx;
// Disable intra modes other than DC_PRED for blocks with low variance
// Threshold for intra skipping based on source variance
// TODO(debargha): Specialize the threshold for super block sizes
static const int skip_intra_var_thresh[BLOCK_SIZES] = {
64, 64, 64, 64, 64, 64, 64, 64, 64, 64, 64, 64, 64,
};
if ((cpi->sf.mode_search_skip_flags & FLAG_SKIP_INTRA_LOWVAR) &&
this_mode != RD_DC_PRED &&
x->source_variance < skip_intra_var_thresh[mbmi->sb_type])
continue;
// Only search the oblique modes if the best so far is
// one of the neighboring directional modes
if ((cpi->sf.mode_search_skip_flags & FLAG_SKIP_INTRA_BESTINTER) &&
(this_mode >= RD_D45_PRED && this_mode <= RD_TM_PRED)) {
if (vp9_mode_order[best_mode_index].ref_frame > INTRA_FRAME)
continue;
}
if (cpi->sf.mode_search_skip_flags & FLAG_SKIP_INTRA_DIRMISMATCH) {
if (conditional_skipintra(this_mode, best_intra_mode))
continue;
}
mbmi->mode = rd_mode_to_mode(this_mode);
super_block_yrd(cpi, x, &rate_y, &distortion_y, &skippable, NULL,
bsize, tx_cache, best_rd);
if (rate_y == INT_MAX)
continue;
uv_tx = MIN(mbmi->tx_size, max_uv_txsize_lookup[bsize]);
if (rate_uv_intra[uv_tx] == INT_MAX) {
choose_intra_uv_mode(cpi, bsize, &rate_uv_intra[uv_tx],
&rate_uv_tokenonly[uv_tx],
&dist_uv[uv_tx], &skip_uv[uv_tx],
&mode_uv[uv_tx]);
}
rate_uv = rate_uv_tokenonly[uv_tx];
distortion_uv = dist_uv[uv_tx];
skippable = skippable && skip_uv[uv_tx];
mbmi->uv_mode = mode_uv[uv_tx];
rate2 = rate_y + x->mbmode_cost[mbmi->mode] + rate_uv_intra[uv_tx];
if (this_mode != RD_DC_PRED && this_mode != RD_TM_PRED)
rate2 += intra_cost_penalty;
distortion2 = distortion_y + distortion_uv;
} else if (this_mode == RD_SPLITMV) {
const int is_comp_pred = second_ref_frame > 0;
int rate;
int64_t distortion;
int64_t this_rd_thresh;
int64_t tmp_rd, tmp_best_rd = INT64_MAX, tmp_best_rdu = INT64_MAX;
int tmp_best_rate = INT_MAX, tmp_best_ratey = INT_MAX;
int64_t tmp_best_distortion = INT_MAX, tmp_best_sse, uv_sse;
int tmp_best_skippable = 0;
int switchable_filter_index;
int_mv *second_ref = is_comp_pred ?
&mbmi->ref_mvs[second_ref_frame][0] : NULL;
union b_mode_info tmp_best_bmodes[16];
MB_MODE_INFO tmp_best_mbmode;
PARTITION_INFO tmp_best_partition;
BEST_SEG_INFO bsi[SWITCHABLE_FILTERS];
int pred_exists = 0;
int uv_skippable;
if (is_comp_pred) {
if (cpi->sf.mode_search_skip_flags & FLAG_SKIP_COMP_BESTINTRA)
if (vp9_mode_order[best_mode_index].ref_frame == INTRA_FRAME)
continue;
if (cpi->sf.mode_search_skip_flags & FLAG_SKIP_COMP_REFMISMATCH)
if (ref_frame != best_inter_ref_frame &&
second_ref_frame != best_inter_ref_frame)
continue;
}
this_rd_thresh = (ref_frame == LAST_FRAME) ?
cpi->rd_threshes[bsize][THR_NEWMV] :
cpi->rd_threshes[bsize][THR_NEWA];
this_rd_thresh = (ref_frame == GOLDEN_FRAME) ?
cpi->rd_threshes[bsize][THR_NEWG] : this_rd_thresh;
xd->mode_info_context->mbmi.tx_size = TX_4X4;
cpi->rd_filter_cache[SWITCHABLE_FILTERS] = INT64_MAX;
if (cm->mcomp_filter_type != BILINEAR) {
tmp_best_filter = EIGHTTAP;
if (x->source_variance <
cpi->sf.disable_filter_search_var_thresh) {
tmp_best_filter = EIGHTTAP;
vp9_zero(cpi->rd_filter_cache);
} else {
for (switchable_filter_index = 0;
switchable_filter_index < SWITCHABLE_FILTERS;
++switchable_filter_index) {
int newbest, rs;
int64_t rs_rd;
mbmi->interp_filter = switchable_filter_index;
vp9_setup_interp_filters(xd, mbmi->interp_filter, &cpi->common);
tmp_rd = rd_pick_best_mbsegmentation(cpi, x,
&mbmi->ref_mvs[ref_frame][0],
second_ref,
best_yrd,
&rate, &rate_y, &distortion,
&skippable, &total_sse,
(int)this_rd_thresh, seg_mvs,
bsi, switchable_filter_index,
mi_row, mi_col);
if (tmp_rd == INT64_MAX)
continue;
cpi->rd_filter_cache[switchable_filter_index] = tmp_rd;
rs = get_switchable_rate(x);
rs_rd = RDCOST(x->rdmult, x->rddiv, rs, 0);
cpi->rd_filter_cache[SWITCHABLE_FILTERS] =
MIN(cpi->rd_filter_cache[SWITCHABLE_FILTERS],
tmp_rd + rs_rd);
if (cm->mcomp_filter_type == SWITCHABLE)
tmp_rd += rs_rd;
newbest = (tmp_rd < tmp_best_rd);
if (newbest) {
tmp_best_filter = mbmi->interp_filter;
tmp_best_rd = tmp_rd;
}
if ((newbest && cm->mcomp_filter_type == SWITCHABLE) ||
(mbmi->interp_filter == cm->mcomp_filter_type &&
cm->mcomp_filter_type != SWITCHABLE)) {
tmp_best_rdu = tmp_rd;
tmp_best_rate = rate;
tmp_best_ratey = rate_y;
tmp_best_distortion = distortion;
tmp_best_sse = total_sse;
tmp_best_skippable = skippable;
tmp_best_mbmode = *mbmi;
tmp_best_partition = *x->partition_info;
for (i = 0; i < 4; i++)
tmp_best_bmodes[i] = xd->mode_info_context->bmi[i];
pred_exists = 1;
if (switchable_filter_index == 0 &&
cpi->sf.use_rd_breakout &&
best_rd < INT64_MAX) {
if (tmp_best_rdu / 2 > best_rd) {
// skip searching the other filters if the first is
// already substantially larger than the best so far
tmp_best_filter = mbmi->interp_filter;
tmp_best_rdu = INT64_MAX;
break;
}
}
}
} // switchable_filter_index loop
}
}
if (tmp_best_rdu == INT64_MAX)
continue;
mbmi->interp_filter = (cm->mcomp_filter_type == SWITCHABLE ?
tmp_best_filter : cm->mcomp_filter_type);
vp9_setup_interp_filters(xd, mbmi->interp_filter, &cpi->common);
if (!pred_exists) {
// Handles the special case when a filter that is not in the
// switchable list (bilinear, 6-tap) is indicated at the frame level
tmp_rd = rd_pick_best_mbsegmentation(cpi, x,
&mbmi->ref_mvs[ref_frame][0],
second_ref,
best_yrd,
&rate, &rate_y, &distortion,
&skippable, &total_sse,
(int)this_rd_thresh, seg_mvs,
bsi, 0,
mi_row, mi_col);
if (tmp_rd == INT64_MAX)
continue;
} else {
if (cpi->common.mcomp_filter_type == SWITCHABLE) {
int rs = get_switchable_rate(x);
tmp_best_rdu -= RDCOST(x->rdmult, x->rddiv, rs, 0);
}
tmp_rd = tmp_best_rdu;
total_sse = tmp_best_sse;
rate = tmp_best_rate;
rate_y = tmp_best_ratey;
distortion = tmp_best_distortion;
skippable = tmp_best_skippable;
*mbmi = tmp_best_mbmode;
*x->partition_info = tmp_best_partition;
for (i = 0; i < 4; i++)
xd->mode_info_context->bmi[i] = tmp_best_bmodes[i];
}
rate2 += rate;
distortion2 += distortion;
if (cpi->common.mcomp_filter_type == SWITCHABLE)
rate2 += get_switchable_rate(x);
if (!mode_excluded) {
if (is_comp_pred)
mode_excluded = cpi->common.comp_pred_mode == SINGLE_PREDICTION_ONLY;
else
mode_excluded = cpi->common.comp_pred_mode == COMP_PREDICTION_ONLY;
}
compmode_cost = vp9_cost_bit(comp_mode_p, is_comp_pred);
tmp_best_rdu = best_rd -
MIN(RDCOST(x->rdmult, x->rddiv, rate2, distortion2),
RDCOST(x->rdmult, x->rddiv, 0, total_sse));
if (tmp_best_rdu > 0) {
// If even the 'Y' rd value of split is higher than best so far
// then dont bother looking at UV
vp9_build_inter_predictors_sbuv(&x->e_mbd, mi_row, mi_col,
BLOCK_8X8);
super_block_uvrd(cm, x, &rate_uv, &distortion_uv, &uv_skippable,
&uv_sse, BLOCK_8X8, tmp_best_rdu);
if (rate_uv == INT_MAX)
continue;
rate2 += rate_uv;
distortion2 += distortion_uv;
skippable = skippable && uv_skippable;
total_sse += uv_sse;
tx_cache[ONLY_4X4] = RDCOST(x->rdmult, x->rddiv, rate2, distortion2);
for (i = 0; i < TX_MODES; ++i)
tx_cache[i] = tx_cache[ONLY_4X4];
}
} else {
mbmi->mode = rd_mode_to_mode(this_mode);
compmode_cost = vp9_cost_bit(comp_mode_p, second_ref_frame > INTRA_FRAME);
this_rd = handle_inter_mode(cpi, x, bsize,
tx_cache,
&rate2, &distortion2, &skippable,
&rate_y, &distortion_y,
&rate_uv, &distortion_uv,
&mode_excluded, &disable_skip,
&tmp_best_filter, frame_mv,
mi_row, mi_col,
single_newmv, &total_sse, best_rd);
if (this_rd == INT64_MAX)
continue;
}
if (cpi->common.comp_pred_mode == HYBRID_PREDICTION) {
rate2 += compmode_cost;
}
// Estimate the reference frame signaling cost and add it
// to the rolling cost variable.
if (second_ref_frame > INTRA_FRAME) {
rate2 += ref_costs_comp[ref_frame];
} else {
rate2 += ref_costs_single[ref_frame];
}
if (!disable_skip) {
// Test for the condition where skip block will be activated
// because there are no non zero coefficients and make any
// necessary adjustment for rate. Ignore if skip is coded at
// segment level as the cost wont have been added in.
// Is Mb level skip allowed (i.e. not coded at segment level).
const int mb_skip_allowed = !vp9_segfeature_active(seg, segment_id,
SEG_LVL_SKIP);
if (skippable && bsize >= BLOCK_8X8) {
// Back out the coefficient coding costs
rate2 -= (rate_y + rate_uv);
// for best yrd calculation
rate_uv = 0;
if (mb_skip_allowed) {
int prob_skip_cost;
// Cost the skip mb case
vp9_prob skip_prob =
vp9_get_pred_prob_mbskip(cm, xd);
if (skip_prob) {
prob_skip_cost = vp9_cost_bit(skip_prob, 1);
rate2 += prob_skip_cost;
}
}
} else if (mb_skip_allowed && ref_frame != INTRA_FRAME && !xd->lossless) {
if (RDCOST(x->rdmult, x->rddiv, rate_y + rate_uv, distortion2) <
RDCOST(x->rdmult, x->rddiv, 0, total_sse)) {
// Add in the cost of the no skip flag.
int prob_skip_cost = vp9_cost_bit(vp9_get_pred_prob_mbskip(cm, xd),
0);
rate2 += prob_skip_cost;
} else {
// FIXME(rbultje) make this work for splitmv also
int prob_skip_cost = vp9_cost_bit(vp9_get_pred_prob_mbskip(cm, xd),
1);
rate2 += prob_skip_cost;
distortion2 = total_sse;
assert(total_sse >= 0);
rate2 -= (rate_y + rate_uv);
rate_y = 0;
rate_uv = 0;
this_skip2 = 1;
}
} else if (mb_skip_allowed) {
// Add in the cost of the no skip flag.
int prob_skip_cost = vp9_cost_bit(vp9_get_pred_prob_mbskip(cm, xd),
0);
rate2 += prob_skip_cost;
}
// Calculate the final RD estimate for this mode.
this_rd = RDCOST(x->rdmult, x->rddiv, rate2, distortion2);
}
// Keep record of best intra rd
if (xd->mode_info_context->mbmi.ref_frame[0] == INTRA_FRAME &&
is_intra_mode(xd->mode_info_context->mbmi.mode) &&
this_rd < best_intra_rd) {
best_intra_rd = this_rd;
best_intra_mode = xd->mode_info_context->mbmi.mode;
}
// Keep record of best inter rd with single reference
if (xd->mode_info_context->mbmi.ref_frame[0] > INTRA_FRAME &&
xd->mode_info_context->mbmi.ref_frame[1] == NONE &&
!mode_excluded &&
this_rd < best_inter_rd) {
best_inter_rd = this_rd;
best_inter_ref_frame = ref_frame;
// best_inter_mode = xd->mode_info_context->mbmi.mode;
}
if (!disable_skip && ref_frame == INTRA_FRAME) {
for (i = 0; i < NB_PREDICTION_TYPES; ++i)
best_pred_rd[i] = MIN(best_pred_rd[i], this_rd);
for (i = 0; i <= SWITCHABLE_FILTERS; i++)
best_filter_rd[i] = MIN(best_filter_rd[i], this_rd);
}
if (this_mode != RD_I4X4_PRED && this_mode != RD_SPLITMV) {
// Store the respective mode distortions for later use.
if (mode_distortions[this_mode] == -1
|| distortion2 < mode_distortions[this_mode]) {
mode_distortions[this_mode] = distortion2;
}
if (frame_distortions[ref_frame] == -1
|| distortion2 < frame_distortions[ref_frame]) {
frame_distortions[ref_frame] = distortion2;
}
}
// Did this mode help.. i.e. is it the new best mode
if (this_rd < best_rd || x->skip) {
if (!mode_excluded) {
// Note index of best mode so far
best_mode_index = mode_index;
if (ref_frame == INTRA_FRAME) {
/* required for left and above block mv */
mbmi->mv[0].as_int = 0;
}
*returnrate = rate2;
*returndistortion = distortion2;
best_rd = this_rd;
best_yrd = best_rd -
RDCOST(x->rdmult, x->rddiv, rate_uv, distortion_uv);
best_mbmode = *mbmi;
best_skip2 = this_skip2;
best_partition = *x->partition_info;
if (this_mode == RD_I4X4_PRED || this_mode == RD_SPLITMV)
for (i = 0; i < 4; i++)
best_bmodes[i] = xd->mode_info_context->bmi[i];
// TODO(debargha): enhance this test with a better distortion prediction
// based on qp, activity mask and history
if (cpi->sf.mode_search_skip_flags & FLAG_EARLY_TERMINATE) {
const int qstep = xd->plane[0].dequant[1];
// TODO(debargha): Enhance this by specializing for each mode_index
int scale = 4;
if (x->source_variance < UINT_MAX) {
const int var_adjust = (x->source_variance < 16);
scale -= var_adjust;
}
if (ref_frame > INTRA_FRAME &&
distortion2 * scale < qstep * qstep) {
early_term = 1;
}
}
}
}
/* keep record of best compound/single-only prediction */
if (!disable_skip && ref_frame != INTRA_FRAME) {
int single_rd, hybrid_rd, single_rate, hybrid_rate;
if (cpi->common.comp_pred_mode == HYBRID_PREDICTION) {
single_rate = rate2 - compmode_cost;
hybrid_rate = rate2;
} else {
single_rate = rate2;
hybrid_rate = rate2 + compmode_cost;
}
single_rd = RDCOST(x->rdmult, x->rddiv, single_rate, distortion2);
hybrid_rd = RDCOST(x->rdmult, x->rddiv, hybrid_rate, distortion2);
if (second_ref_frame <= INTRA_FRAME &&
single_rd < best_pred_rd[SINGLE_PREDICTION_ONLY]) {
best_pred_rd[SINGLE_PREDICTION_ONLY] = single_rd;
} else if (second_ref_frame > INTRA_FRAME &&
single_rd < best_pred_rd[COMP_PREDICTION_ONLY]) {
best_pred_rd[COMP_PREDICTION_ONLY] = single_rd;
}
if (hybrid_rd < best_pred_rd[HYBRID_PREDICTION])
best_pred_rd[HYBRID_PREDICTION] = hybrid_rd;
}
/* keep record of best filter type */
if (!mode_excluded && !disable_skip && ref_frame != INTRA_FRAME &&
cm->mcomp_filter_type != BILINEAR) {
int64_t ref = cpi->rd_filter_cache[cm->mcomp_filter_type == SWITCHABLE ?
SWITCHABLE_FILTERS : cm->mcomp_filter_type];
for (i = 0; i <= SWITCHABLE_FILTERS; i++) {
int64_t adj_rd;
// In cases of poor prediction, filter_cache[] can contain really big
// values, which actually are bigger than this_rd itself. This can
// cause negative best_filter_rd[] values, which is obviously silly.
// Therefore, if filter_cache < ref, we do an adjusted calculation.
if (cpi->rd_filter_cache[i] >= ref)
adj_rd = this_rd + cpi->rd_filter_cache[i] - ref;
else // FIXME(rbultje) do this for comppred also
adj_rd = this_rd - (ref - cpi->rd_filter_cache[i]) * this_rd / ref;
best_filter_rd[i] = MIN(best_filter_rd[i], adj_rd);
}
}
/* keep record of best txfm size */
if (bsize < BLOCK_32X32) {
if (bsize < BLOCK_16X16) {
if (this_mode == RD_SPLITMV || this_mode == RD_I4X4_PRED)
tx_cache[ALLOW_8X8] = tx_cache[ONLY_4X4];
tx_cache[ALLOW_16X16] = tx_cache[ALLOW_8X8];
}
tx_cache[ALLOW_32X32] = tx_cache[ALLOW_16X16];
}
if (!mode_excluded && this_rd != INT64_MAX) {
for (i = 0; i < TX_MODES && tx_cache[i] < INT64_MAX; i++) {
int64_t adj_rd = INT64_MAX;
if (this_mode != RD_I4X4_PRED) {
adj_rd = this_rd + tx_cache[i] - tx_cache[cm->tx_mode];
} else {
adj_rd = this_rd;
}
if (adj_rd < best_tx_rd[i])
best_tx_rd[i] = adj_rd;
}
}
if (early_term)
break;
if (x->skip && !comp_pred)
break;
}
if (best_rd >= best_rd_so_far)
return INT64_MAX;
// If we used an estimate for the uv intra rd in the loop above...
if (cpi->sf.use_uv_intra_rd_estimate) {
// Do Intra UV best rd mode selection if best mode choice above was intra.
if (vp9_mode_order[best_mode_index].ref_frame == INTRA_FRAME) {
TX_SIZE uv_tx_size = get_uv_tx_size(mbmi);
rd_pick_intra_sbuv_mode(cpi, x, &rate_uv_intra[uv_tx_size],
&rate_uv_tokenonly[uv_tx_size],
&dist_uv[uv_tx_size],
&skip_uv[uv_tx_size],
bsize < BLOCK_8X8 ? BLOCK_8X8 : bsize);
}
}
// If we are using reference masking and the set mask flag is set then
// create the reference frame mask.
if (cpi->sf.reference_masking && cpi->set_ref_frame_mask)
cpi->ref_frame_mask = ~(1 << vp9_mode_order[best_mode_index].ref_frame);
// Flag all modes that have a distortion thats > 2x the best we found at
// this level.
for (mode_index = 0; mode_index < MB_MODE_COUNT; ++mode_index) {
if (mode_index == NEARESTMV || mode_index == NEARMV || mode_index == NEWMV)
continue;
if (mode_distortions[mode_index] > 2 * *returndistortion) {
ctx->modes_with_high_error |= (1 << mode_index);
}
}
// Flag all ref frames that have a distortion thats > 2x the best we found at
// this level.
for (ref_frame = INTRA_FRAME; ref_frame <= ALTREF_FRAME; ref_frame++) {
if (frame_distortions[ref_frame] > 2 * *returndistortion) {
ctx->frames_with_high_error |= (1 << ref_frame);
}
}
if (best_rd == INT64_MAX && bsize < BLOCK_8X8) {
*returnrate = INT_MAX;
*returndistortion = INT_MAX;
return best_rd;
}
assert((cm->mcomp_filter_type == SWITCHABLE) ||
(cm->mcomp_filter_type == best_mbmode.interp_filter) ||
(best_mbmode.ref_frame[0] == INTRA_FRAME));
// Updating rd_thresh_freq_fact[] here means that the different
// partition/block sizes are handled independently based on the best
// choice for the current partition. It may well be better to keep a scaled
// best rd so far value and update rd_thresh_freq_fact based on the mode/size
// combination that wins out.
if (cpi->sf.adaptive_rd_thresh) {
for (mode_index = 0; mode_index < MAX_MODES; ++mode_index) {
if (mode_index == best_mode_index) {
cpi->rd_thresh_freq_fact[bsize][mode_index] -=
(cpi->rd_thresh_freq_fact[bsize][mode_index] >> 3);
} else {
cpi->rd_thresh_freq_fact[bsize][mode_index] += RD_THRESH_INC;
if (cpi->rd_thresh_freq_fact[bsize][mode_index] >
(cpi->sf.adaptive_rd_thresh * MAX_RD_THRESH_FACT)) {
cpi->rd_thresh_freq_fact[bsize][mode_index] =
cpi->sf.adaptive_rd_thresh * MAX_RD_THRESH_FACT;
}
}
}
}
// macroblock modes
*mbmi = best_mbmode;
x->skip |= best_skip2;
if (best_mbmode.ref_frame[0] == INTRA_FRAME &&
best_mbmode.sb_type < BLOCK_8X8) {
for (i = 0; i < 4; i++)
xd->mode_info_context->bmi[i].as_mode = best_bmodes[i].as_mode;
}
if (best_mbmode.ref_frame[0] != INTRA_FRAME &&
best_mbmode.sb_type < BLOCK_8X8) {
for (i = 0; i < 4; i++)
xd->mode_info_context->bmi[i].as_mv[0].as_int =
best_bmodes[i].as_mv[0].as_int;
if (mbmi->ref_frame[1] > 0)
for (i = 0; i < 4; i++)
xd->mode_info_context->bmi[i].as_mv[1].as_int =
best_bmodes[i].as_mv[1].as_int;
*x->partition_info = best_partition;
mbmi->mv[0].as_int = xd->mode_info_context->bmi[3].as_mv[0].as_int;
mbmi->mv[1].as_int = xd->mode_info_context->bmi[3].as_mv[1].as_int;
}
for (i = 0; i < NB_PREDICTION_TYPES; ++i) {
if (best_pred_rd[i] == INT64_MAX)
best_pred_diff[i] = INT_MIN;
else
best_pred_diff[i] = best_rd - best_pred_rd[i];
}
if (!x->skip) {
for (i = 0; i <= SWITCHABLE_FILTERS; i++) {
if (best_filter_rd[i] == INT64_MAX)
best_filter_diff[i] = 0;
else
best_filter_diff[i] = best_rd - best_filter_rd[i];
}
if (cm->mcomp_filter_type == SWITCHABLE)
assert(best_filter_diff[SWITCHABLE_FILTERS] == 0);
} else {
vpx_memset(best_filter_diff, 0, sizeof(best_filter_diff));
}
if (!x->skip) {
for (i = 0; i < TX_MODES; i++) {
if (best_tx_rd[i] == INT64_MAX)
best_tx_diff[i] = 0;
else
best_tx_diff[i] = best_rd - best_tx_rd[i];
}
} else {
vpx_memset(best_tx_diff, 0, sizeof(best_tx_diff));
}
set_scale_factors(xd, mbmi->ref_frame[0], mbmi->ref_frame[1],
scale_factor);
store_coding_context(x, ctx, best_mode_index,
&best_partition,
&mbmi->ref_mvs[mbmi->ref_frame[0]][0],
&mbmi->ref_mvs[mbmi->ref_frame[1] < 0 ? 0 :
mbmi->ref_frame[1]][0],
best_pred_diff, best_tx_diff, best_filter_diff);
return best_rd;
}