This commit was manufactured by cvs2svn to create tag 'STATE_before_zlib'.

.cvsignore

@@ -1,8 +1,9 @@
 openssl.pc
-libcrypto.pc
-libssl.pc
+Makefile.ssl
 MINFO
 makefile.one
+tmp
+out
 outinc
 rehash.time
 testlog
@@ -11,10 +12,5 @@ maketest.log
 cctest
 cctest.c
 cctest.a
-*.flc
-semantic.cache
-Makefile
-*.dll*
-*.so*
-*.sl*
-*.dylib*
+libcrypto.so.*
+libssl.so.*

ACKNOWLEDGMENTS

@@ -1,25 +0,0 @@
-The OpenSSL project depends on volunteer efforts and financial support from
-the end user community. That support comes in the form of donations and paid
-sponsorships, software support contracts, paid consulting services
-and commissioned software development.
-
-Since all these activities support the continued development and improvement
-of OpenSSL we consider all these clients and customers as sponsors of the
-OpenSSL project.
-
-We would like to identify and thank the following such sponsors for their past
-or current significant support of the OpenSSL project:
-
-Very significant support:
-
-	OpenGear: www.opengear.com
-
-Significant support:
-
-	PSW Group: www.psw.net
-
-Please note that we ask permission to identify sponsors and that some sponsors
-we consider eligible for inclusion here have requested to remain anonymous.
-
-Additional sponsorship or financial support is always welcome: for more
-information please contact the OpenSSL Software Foundation.

CHANGES.SSLeay

@@ -148,7 +148,7 @@ eric (about to go bushwalking for the 4 day easter break :-)
       This would tend to cause memory overwrites since SSLv3 has
       a maximum packet size of 16k.  If your program uses
       buffers <= 16k, you would probably never see this problem.
-    - Fixed a few errors that were cause by malloc() not returning
+    - Fixed a new errors that were cause by malloc() not returning
       0 initialised memory..
     - SSL_OP_NETSCAPE_CA_DN_BUG was being switched on when using
       SSL_CTX_set_options(ssl_ctx,SSL_OP_ALL); which was a bad thing

FAQ

@@ -31,9 +31,6 @@ OpenSSL  -  Frequently Asked Questions
 * Why does my browser give a warning about a mismatched hostname?
 * How do I install a CA certificate into a browser?
 * Why is OpenSSL x509 DN output not conformant to RFC2253?
-* What is a "128 bit certificate"? Can I create one with OpenSSL?
-* Why does OpenSSL set the authority key identifier extension incorrectly?
-* How can I set up a bundle of commercial root CA certificates?
 
 [BUILD] Questions about building and testing OpenSSL
 
@@ -47,21 +44,12 @@ OpenSSL  -  Frequently Asked Questions
 * What is special about OpenSSL on Redhat?
 * Why does the OpenSSL compilation fail on MacOS X?
 * Why does the OpenSSL test suite fail on MacOS X?
-* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
-* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
-* Why does the OpenSSL test suite fail in sha512t on x86 CPU?
-* Why does compiler fail to compile sha512.c?
-* Test suite still fails, what to do?
-* I think I've found a bug, what should I do?
-* I'm SURE I've found a bug, how do I report it?
-* I've found a security issue, how do I report it?
 
 [PROG] Questions about programming with OpenSSL
 
 * Is OpenSSL thread-safe?
 * I've compiled a program under Windows and it crashes: why?
 * How do I read or write a DER encoded buffer using the ASN1 functions?
-* OpenSSL uses DER but I need BER format: does OpenSSL support BER?
 * I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
 * I've called <some function> and it fails, why?
 * I just get a load of numbers for the error output, what do they mean?
@@ -70,10 +58,6 @@ OpenSSL  -  Frequently Asked Questions
 * Can I use OpenSSL's SSL library with non-blocking I/O?
 * Why doesn't my server application receive a client certificate?
 * Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
-* I think I've detected a memory leak, is this a bug?
-* Why does Valgrind complain about the use of uninitialized data?
-* Why doesn't a memory BIO work when a file does?
-* Where are the declarations and implementations of d2i_X509() etc?
 
 ===============================================================================
 
@@ -82,7 +66,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 1.0.0e was released on Sep 6th, 2011.
+OpenSSL 0.9.6h was released on December 5, 2002.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -98,17 +82,14 @@ explains how to install this library.
 
 OpenSSL includes a command line utility that can be used to perform a
 variety of cryptographic functions.  It is described in the openssl(1)
-manpage.  Documentation for developers is currently being written. Many
-manual pages are available; overviews over libcrypto and
+manpage.  Documentation for developers is currently being written.  A
+few manual pages already are available; overviews over libcrypto and
 libssl are given in the crypto(3) and ssl(3) manpages.
 
 The OpenSSL manpages are installed in /usr/local/ssl/man/ (or a
 different directory if you specified one as described in INSTALL).
 In addition, you can read the most current versions at
-<URL: http://www.openssl.org/docs/>. Note that the online documents refer
-to the very latest development versions of OpenSSL and may include features
-not present in released versions. If in doubt refer to the documentation
-that came with the version of OpenSSL you are using.
+<URL: http://www.openssl.org/docs/>.
 
 For information on parts of libcrypto that are not yet documented, you
 might want to read Ariel Glenn's documentation on SSLeay 0.9, OpenSSL's
@@ -133,14 +114,11 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 
 * Where can I get a compiled version of OpenSSL?
 
-You can finder pointers to binary distributions in
-<URL: http://www.openssl.org/related/binaries.html> .
-
 Some applications that use OpenSSL are distributed in binary form.
 When using such an application, you don't need to install OpenSSL
 yourself; the application will include the required parts (e.g. DLLs).
 
-If you want to build OpenSSL on a Windows system and you don't have
+If you want to install OpenSSL on a Windows system and you don't have
 a C compiler, read the "Mingw32" section of INSTALL.W32 for information
 on how to obtain and install the free GNU C compiler.
 
@@ -156,8 +134,8 @@ less Unix-centric, it might have been used much earlier.
 
 With version 0.9.6 OpenSSL was extended to interface to external crypto
 hardware. This was realized in a special release '0.9.6-engine'. With
-version 0.9.7 the changes were merged into the main development line,
-so that the special release is no longer necessary.
+version 0.9.7 (not yet released) the changes were merged into the main
+development line, so that the special release is no longer necessary.
 
 * How do I check the authenticity of the OpenSSL distribution?
 
@@ -167,8 +145,7 @@ Use MD5 to check that a tarball from a mirror site is identical:
    md5sum TARBALL | awk '{print $1;}' | cmp - TARBALL.md5
 
 You can check authenticity using pgp or gpg. You need the OpenSSL team
-member public key used to sign it (download it from a key server, see a
-list of keys at <URL: http://www.openssl.org/about/>). Then
+member public key used to sign it (download it from a key server). Then
 just do:
 
    pgp TARBALL.asc
@@ -182,8 +159,8 @@ you if you want to use OpenSSL.  For information on intellectual
 property rights, please consult a lawyer.  The OpenSSL team does not
 offer legal advice.
 
-You can configure OpenSSL so as not to use IDEA, MDC2 and RC5 by using
- ./config no-idea no-mdc2 no-rc5
+You can configure OpenSSL so as not to use RC5 and IDEA by using
+ ./config no-rc5 no-idea
 
 
 * Can I use OpenSSL with GPL software?
@@ -210,30 +187,18 @@ for permission to use their software with OpenSSL.
 
 Cryptographic software needs a source of unpredictable data to work
 correctly.  Many open source operating systems provide a "randomness
-device" (/dev/urandom or /dev/random) that serves this purpose.
-All OpenSSL versions try to use /dev/urandom by default; starting with
-version 0.9.7, OpenSSL also tries /dev/random if /dev/urandom is not
-available.
+device" that serves this purpose.  On other systems, applications have
+to call the RAND_add() or RAND_seed() function with appropriate data
+before generating keys or performing public key encryption.
+(These functions initialize the pseudo-random number generator, PRNG.)
 
-On other systems, applications have to call the RAND_add() or
-RAND_seed() function with appropriate data before generating keys or
-performing public key encryption. (These functions initialize the
-pseudo-random number generator, PRNG.)  Some broken applications do
-not do this.  As of version 0.9.5, the OpenSSL functions that need
-randomness report an error if the random number generator has not been
-seeded with at least 128 bits of randomness.  If this error occurs and
-is not discussed in the documentation of the application you are
-using, please contact the author of that application; it is likely
-that it never worked correctly.  OpenSSL 0.9.5 and later make the
-error visible by refusing to perform potentially insecure encryption.
-
-If you are using Solaris 8, you can add /dev/urandom and /dev/random
-devices by installing patch 112438 (Sparc) or 112439 (x86), which are
-available via the Patchfinder at <URL: http://sunsolve.sun.com>
-(Solaris 9 includes these devices by default). For /dev/random support
-for earlier Solaris versions, see Sun's statement at
-<URL: http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski>
-(the SUNWski package is available in patch 105710).
+Some broken applications do not do this.  As of version 0.9.5, the
+OpenSSL functions that need randomness report an error if the random
+number generator has not been seeded with at least 128 bits of
+randomness.  If this error occurs, please contact the author of the
+application you are using.  It is likely that it never worked
+correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
+to perform potentially insecure encryption.
 
 On systems without /dev/urandom and /dev/random, it is a good idea to
 use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
@@ -266,6 +231,18 @@ OpenSSL command line tools. Applications using the OpenSSL library
 provide their own configuration options to specify the entropy source,
 please check out the documentation coming the with application.
 
+For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
+installing the SUNski package from Sun patch 105710-01 (Sparc) which
+adds a /dev/random device and make sure it gets used, usually through
+$RANDFILE.  There are probably similar patches for the other Solaris
+versions.  An official statement from Sun with respect to /dev/random
+support can be found at
+  http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski
+However, be warned that /dev/random is usually a blocking device, which
+may have some effects on OpenSSL.
+A third party /dev/random solution for Solaris is available at
+  http://www.cosy.sbg.ac.at/~andi/
+
 
 * Why do I get an "unable to write 'random state'" error message?
 
@@ -399,76 +376,6 @@ interface, the "-nameopt" option could be introduded. See the manual
 page of the "openssl x509" commandline tool for details. The old behaviour
 has however been left as default for the sake of compatibility.
 
-* What is a "128 bit certificate"? Can I create one with OpenSSL?
-
-The term "128 bit certificate" is a highly misleading marketing term. It does
-*not* refer to the size of the public key in the certificate! A certificate
-containing a 128 bit RSA key would have negligible security.
-
-There were various other names such as "magic certificates", "SGC
-certificates", "step up certificates" etc.
-
-You can't generally create such a certificate using OpenSSL but there is no
-need to any more. Nowadays web browsers using unrestricted strong encryption
-are generally available.
-
-When there were tight restrictions on the export of strong encryption
-software from the US only weak encryption algorithms could be freely exported
-(initially 40 bit and then 56 bit). It was widely recognised that this was
-inadequate. A relaxation of the rules allowed the use of strong encryption but
-only to an authorised server.
-
-Two slighly different techniques were developed to support this, one used by
-Netscape was called "step up", the other used by MSIE was called "Server Gated
-Cryptography" (SGC). When a browser initially connected to a server it would
-check to see if the certificate contained certain extensions and was issued by
-an authorised authority. If these test succeeded it would reconnect using
-strong encryption.
-
-Only certain (initially one) certificate authorities could issue the
-certificates and they generally cost more than ordinary certificates.
-
-Although OpenSSL can create certificates containing the appropriate extensions
-the certificate would not come from a permitted authority and so would not
-be recognized.
-
-The export laws were later changed to allow almost unrestricted use of strong
-encryption so these certificates are now obsolete.
-
-
-* Why does OpenSSL set the authority key identifier (AKID) extension incorrectly?
-
-It doesn't: this extension is often the cause of confusion.
-
-Consider a certificate chain A->B->C so that A signs B and B signs C. Suppose
-certificate C contains AKID.
-
-The purpose of this extension is to identify the authority certificate B. This
-can be done either by including the subject key identifier of B or its issuer
-name and serial number.
-
-In this latter case because it is identifying certifcate B it must contain the
-issuer name and serial number of B.
-
-It is often wrongly assumed that it should contain the subject name of B. If it
-did this would be redundant information because it would duplicate the issuer
-name of C.
-
-
-* How can I set up a bundle of commercial root CA certificates?
-
-The OpenSSL software is shipped without any root CA certificate as the
-OpenSSL project does not have any policy on including or excluding
-any specific CA and does not intend to set up such a policy. Deciding
-about which CAs to support is up to application developers or
-administrators.
-
-Other projects do have other policies so you can for example extract the CA
-bundle used by Mozilla and/or modssl as described in this article:
-
-  <URL: http://www.mail-archive.com/modssl-users@modssl.org/msg16980.html>
-
-
 [BUILD] =======================================================================
 
 * Why does the linker complain about undefined symbols?
@@ -508,7 +415,7 @@ when you run the test suite (using "make test").  The message returned is
 "bc: 1 not implemented".
 
 The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see <URL: http://www.gnu.org/software/software.html>
+and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
 for download instructions) can be safely used, for example.
 
 
@@ -519,7 +426,7 @@ that the OpenSSL bntest throws at it.  This gets triggered when you run the
 test suite (using "make test").  The message returned is "bc: stack empty".
 
 The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see <URL: http://www.gnu.org/software/software.html>
+and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
 for download instructions) can be safely used, for example.
 
 
@@ -558,10 +465,6 @@ This will only compile sha_dgst.c with -O0, the rest with the optimization
 level chosen by the configuration process.  When the above is done, do the
 test and installation and you're set.
 
-3. Reconfigure the toolkit with no-sha0 option to leave out SHA0. It 
-should not be used and is not used in SSL/TLS nor any other recognized
-protocol in either case.
-
 
 * Why does the OpenSSL compilation fail with "ar: command not found"?
 
@@ -585,13 +488,10 @@ and then redo the compilation.  What you should really do is make sure
 Sometimes, you may get reports from VC++ command line (cl) that it
 can't find standard include files like stdio.h and other weirdnesses.
 One possible cause is that the environment isn't correctly set up.
-To solve that problem for VC++ versions up to 6, one should run
-VCVARS32.BAT which is found in the 'bin' subdirectory of the VC++
-installation directory (somewhere under 'Program Files').  For VC++
-version 7 (and up?), which is also called VS.NET, the file is called
-VSVARS32.BAT instead.
-This needs to be done prior to running NMAKE, and the changes are only
-valid for the current DOS session.
+To solve that problem, one should run VCVARS32.BAT which is found in
+the 'bin' subdirectory of the VC++ installation directory (somewhere
+under 'Program Files').  This needs to be done prior to running NMAKE,
+and the changes are only valid for the current DOS session.
 
 
 * What is special about OpenSSL on Redhat?
@@ -652,106 +552,6 @@ libraries you just built.
 Look in the file PROBLEMS for a more detailed explanation and for possible
 solutions.
 
-* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
-
-Failure in BN_sqr test is most likely caused by a failure to configure the
-toolkit for current platform or lack of support for the platform in question.
-Run './config -t' and './apps/openssl version -p'. Do these platform
-identifiers match? If they don't, then you most likely failed to run
-./config and you're hereby advised to do so before filing a bug report.
-If ./config itself fails to run, then it's most likely problem with your
-local environment and you should turn to your system administrator (or
-similar). If identifiers match (and/or no alternative identifier is
-suggested by ./config script), then the platform is unsupported. There might
-or might not be a workaround. Most notably on SPARC64 platforms with GNU
-C compiler you should be able to produce a working build by running
-'./config -m32'. I understand that -m32 might not be what you want/need,
-but the build should be operational. For further details turn to
-<openssl-dev@openssl.org>.
-
-* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
-
-As of 0.9.7 assembler routines were overhauled for position independence
-of the machine code, which is essential for shared library support. For
-some reason OpenBSD is equipped with an out-of-date GNU assembler which
-finds the new code offensive. To work around the problem, configure with
-no-asm (and sacrifice a great deal of performance) or patch your assembler
-according to <URL: http://www.openssl.org/~appro/gas-1.92.3.OpenBSD.patch>.
-For your convenience a pre-compiled replacement binary is provided at
-<URL: http://www.openssl.org/~appro/gas-1.92.3.static.aout.bin>.
-Reportedly elder *BSD a.out platforms also suffer from this problem and
-remedy should be same. Provided binary is statically linked and should be
-working across wider range of *BSD branches, not just OpenBSD.
-
-* Why does the OpenSSL test suite fail in sha512t on x86 CPU?
-
-If the test program in question fails withs SIGILL, Illegal Instruction
-exception, then you more than likely to run SSE2-capable CPU, such as
-Intel P4, under control of kernel which does not support SSE2
-instruction extentions. See accompanying INSTALL file and
-OPENSSL_ia32cap(3) documentation page for further information.
-
-* Why does compiler fail to compile sha512.c?
-
-OpenSSL SHA-512 implementation depends on compiler support for 64-bit
-integer type. Few elder compilers [ULTRIX cc, SCO compiler to mention a
-couple] lack support for this and therefore are incapable of compiling
-the module in question. The recommendation is to disable SHA-512 by
-adding no-sha512 to ./config [or ./Configure] command line. Another
-possible alternative might be to switch to GCC.
-
-* Test suite still fails, what to do?
-
-Another common reason for failure to complete some particular test is
-simply bad code generated by a buggy component in toolchain or deficiency
-in run-time environment. There are few cases documented in PROBLEMS file,
-consult it for possible workaround before you beat the drum. Even if you
-don't find solution or even mention there, do reserve for possibility of
-a compiler bug. Compiler bugs might appear in rather bizarre ways, they
-never make sense, and tend to emerge when you least expect them. In order
-to identify one, drop optimization level, e.g. by editing CFLAG line in
-top-level Makefile, recompile and re-run the test.
-
-* I think I've found a bug, what should I do?
-
-If you are a new user then it is quite likely you haven't found a bug and
-something is happening you aren't familiar with. Check this FAQ, the associated
-documentation and the mailing lists for similar queries. If you are still
-unsure whether it is a bug or not submit a query to the openssl-users mailing
-list.
-
-
-* I'm SURE I've found a bug, how do I report it?
-
-Bug reports with no security implications should be sent to the request
-tracker. This can be done by mailing the report to <rt@openssl.org> (or its
-alias <openssl-bugs@openssl.org>), please note that messages sent to the
-request tracker also appear in the public openssl-dev mailing list.
-
-The report should be in plain text. Any patches should be sent as
-plain text attachments because some mailers corrupt patches sent inline.
-If your issue affects multiple versions of OpenSSL check any patches apply
-cleanly and, if possible include patches to each affected version.
-
-The report should be given a meaningful subject line briefly summarising the
-issue. Just "bug in OpenSSL" or "bug in OpenSSL 0.9.8n" is not very helpful.
-
-By sending reports to the request tracker the bug can then be given a priority
-and assigned to the appropriate maintainer. The history of discussions can be
-accessed and if the issue has been addressed or a reason why not. If patches
-are only sent to openssl-dev they can be mislaid if a team member has to
-wade through months of old messages to review the discussion.
-
-See also <URL: http://www.openssl.org/support/rt.html>
-
-
-* I've found a security issue, how do I report it?
-
-If you think your bug has security implications then please send it to
-openssl-security@openssl.org if you don't get a prompt reply at least 
-acknowledging receipt then resend or mail it directly to one of the
-more active team members (e.g. Steve).
-
 [PROG] ========================================================================
 
 * Is OpenSSL thread-safe?
@@ -763,11 +563,8 @@ libraries.  If your platform is not one of these, consult the INSTALL
 file.
 
 Multi-threaded applications must provide two callback functions to
-OpenSSL by calling CRYPTO_set_locking_callback() and
-CRYPTO_set_id_callback(), for all versions of OpenSSL up to and
-including 0.9.8[abc...]. As of version 1.0.0, CRYPTO_set_id_callback()
-and associated APIs are deprecated by CRYPTO_THREADID_set_callback()
-and friends. This is described in the threads(3) manpage.
+OpenSSL.  This is described in the threads(3) manpage.
+
 
 * I've compiled a program under Windows and it crashes: why?
 
@@ -787,10 +584,10 @@ your application must link  against the same by which OpenSSL was
 built.  If you are using MS Visual C++ (Studio) this can be changed
 by:
 
- 1. Select Settings... from the Project Menu.
- 2. Select the C/C++ Tab.
- 3. Select "Code Generation from the "Category" drop down list box
- 4. Select the Appropriate library (see table below) from the "Use
+1.  Select Settings... from the Project Menu.
+2.  Select the C/C++ Tab.
+3.  Select "Code Generation from the "Category" drop down list box
+4.  Select the Appropriate library (see table below) from the "Use
     run-time library" drop down list box.  Perform this step for both
     your debug and release versions of your application (look at the
     top left of the settings panel to change between the two)
@@ -809,44 +606,30 @@ by:
 Note that debug and release libraries are NOT interchangeable.  If you
 built OpenSSL with /MD your application must use /MD and cannot use /MDd.
 
-As per 0.9.8 the above limitation is eliminated for .DLLs. OpenSSL
-.DLLs compiled with some specific run-time option [we insist on the
-default /MD] can be deployed with application compiled with different
-option or even different compiler. But there is a catch! Instead of
-re-compiling OpenSSL toolkit, as you would have to with prior versions,
-you have to compile small C snippet with compiler and/or options of
-your choice. The snippet gets installed as
-<install-root>/include/openssl/applink.c and should be either added to
-your application project or simply #include-d in one [and only one]
-of your application source files. Failure to link this shim module
-into your application manifests itself as fatal "no OPENSSL_Applink"
-run-time error. An explicit reminder is due that in this situation
-[mixing compiler options] it is as important to add CRYPTO_malloc_init
-prior first call to OpenSSL.
 
 * How do I read or write a DER encoded buffer using the ASN1 functions?
 
 You have two options. You can either use a memory BIO in conjunction
-with the i2d_*_bio() or d2i_*_bio() functions or you can use the
-i2d_*(), d2i_*() functions directly. Since these are often the
+with the i2d_XXX_bio() or d2i_XXX_bio() functions or you can use the
+i2d_XXX(), d2i_XXX() functions directly. Since these are often the
 cause of grief here are some code fragments using PKCS7 as an example:
 
- unsigned char *buf, *p;
- int len;
+unsigned char *buf, *p;
+int len;
 
- len = i2d_PKCS7(p7, NULL);
- buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */
- p = buf;
- i2d_PKCS7(p7, &p);
+len = i2d_PKCS7(p7, NULL);
+buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */
+p = buf;
+i2d_PKCS7(p7, &p);
 
 At this point buf contains the len bytes of the DER encoding of
 p7.
 
 The opposite assumes we already have len bytes in buf:
 
- unsigned char *p;
- p = buf;
- p7 = d2i_PKCS7(NULL, &p, len);
+unsigned char *p;
+p = buf;
+p7 = d2i_PKCS7(NULL, &p, len);
 
 At this point p7 contains a valid PKCS7 structure of NULL if an error
 occurred. If an error occurred ERR_print_errors(bio) should give more
@@ -861,20 +644,6 @@ and attempts to free the buffer will have unpredictable results
 because it no longer points to the same address.
 
 
-* OpenSSL uses DER but I need BER format: does OpenSSL support BER?
-
-The short answer is yes, because DER is a special case of BER and OpenSSL
-ASN1 decoders can process BER.
-
-The longer answer is that ASN1 structures can be encoded in a number of
-different ways. One set of ways is the Basic Encoding Rules (BER) with various
-permissible encodings. A restriction of BER is the Distinguished Encoding
-Rules (DER): these uniquely specify how a given structure is encoded.
-
-Therefore, because DER is a special case of BER, DER is an acceptable encoding
-for BER.
-
-
 * I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
 
 This usually happens when you try compiling something using the PKCS#12
@@ -908,11 +677,11 @@ code itself (the hex digits after the second colon).
 
 * Why do I get errors about unknown algorithms?
 
-The cause is forgetting to load OpenSSL's table of algorithms with
-OpenSSL_add_all_algorithms(). See the manual page for more information. This
-can cause several problems such as being unable to read in an encrypted
-PEM file, unable to decrypt a PKCS#12 file or signature failure when
-verifying certificates.
+This can happen under several circumstances such as reading in an
+encrypted private key or attempting to decrypt a PKCS#12 file. The cause
+is forgetting to load OpenSSL's table of algorithms with
+OpenSSL_add_all_algorithms(). See the manual page for more information.
+
 
 * Why can't the OpenSSH configure script detect OpenSSL?
 
@@ -927,7 +696,6 @@ The general answer is to check the config.log file generated when running
 the OpenSSH configure script. It should contain the detailed information
 on why the OpenSSL library was not detected or considered incompatible.
 
-
 * Can I use OpenSSL's SSL library with non-blocking I/O?
 
 Yes; make sure to read the SSL_get_error(3) manual page!
@@ -957,69 +725,5 @@ The correct name according to RFC2256 (LDAP) is x500UniqueIdentifier.
 Change your code to use the new name when compiling against OpenSSL 0.9.7.
 
 
-* I think I've detected a memory leak, is this a bug?
-
-In most cases the cause of an apparent memory leak is an OpenSSL internal table
-that is allocated when an application starts up. Since such tables do not grow
-in size over time they are harmless.
-
-These internal tables can be freed up when an application closes using various
-functions.  Currently these include following:
-
-Thread-local cleanup functions:
-
-  ERR_remove_state()
-
-Application-global cleanup functions that are aware of usage (and therefore
-thread-safe):
-
-  ENGINE_cleanup() and CONF_modules_unload()
-
-"Brutal" (thread-unsafe) Application-global cleanup functions:
-
-  ERR_free_strings(), EVP_cleanup() and CRYPTO_cleanup_all_ex_data().
-
-
-* Why does Valgrind complain about the use of uninitialized data?
-
-When OpenSSL's PRNG routines are called to generate random numbers the supplied
-buffer contents are mixed into the entropy pool: so it technically does not
-matter whether the buffer is initialized at this point or not.  Valgrind (and
-other test tools) will complain about this. When using Valgrind, make sure the
-OpenSSL library has been compiled with the PURIFY macro defined (-DPURIFY)
-to get rid of these warnings.
-
-
-* Why doesn't a memory BIO work when a file does?
-
-This can occur in several cases for example reading an S/MIME email message.
-The reason is that a memory BIO can do one of two things when all the data
-has been read from it.
-
-The default behaviour is to indicate that no more data is available and that
-the call should be retried, this is to allow the application to fill up the BIO
-again if necessary.
-
-Alternatively it can indicate that no more data is available and that EOF has
-been reached.
-
-If a memory BIO is to behave in the same way as a file this second behaviour
-is needed. This must be done by calling:
-
-   BIO_set_mem_eof_return(bio, 0);
-
-See the manual pages for more details.
-
-
-* Where are the declarations and implementations of d2i_X509() etc?
-
-These are defined and implemented by macros of the form:
-
-
- DECLARE_ASN1_FUNCTIONS(X509) and IMPLEMENT_ASN1_FUNCTIONS(X509)
-
-The implementation passes an ASN1 "template" defining the structure into an
-ASN1 interpreter using generalised functions such as ASN1_item_d2i().
-
-
 ===============================================================================
+

INSTALL

@@ -2,10 +2,8 @@
  INSTALLATION ON THE UNIX PLATFORM
  ---------------------------------
 
- [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X)
-  and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS,
-  INSTALL.MacOS and INSTALL.NW.
-  
+ [Installation on DOS (with djgpp), Windows, OpenVMS and MacOS (before MacOS X)
+  is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS and INSTALL.MacOS.
   This document describes installation on operating systems in the Unix
   family.]
 
@@ -75,30 +73,14 @@
   no-asm        Do not use assembler code.
 
   386           Use the 80386 instruction set only (the default x86 code is
-                more efficient, but requires at least a 486). Note: Use
-                compiler flags for any other CPU specific configuration,
-                e.g. "-m32" to build x86 code on an x64 system.
-
-  no-sse2	Exclude SSE2 code pathes. Normally SSE2 extention is
-		detected at run-time, but the decision whether or not the
-		machine code will be executed is taken solely on CPU
-		capability vector. This means that if you happen to run OS
-		kernel which does not support SSE2 extension on Intel P4
-		processor, then your application might be exposed to
-		"illegal instruction" exception. There might be a way
-		to enable support in kernel, e.g. FreeBSD kernel can be
-		compiled with CPU_ENABLE_SSE, and there is a way to
-		disengage SSE2 code pathes upon application start-up,
-		but if you aim for wider "audience" running such kernel,
-		consider no-sse2. Both 386 and no-asm options above imply
-		no-sse2.
+                more efficient, but requires at least a 486).
 
   no-<cipher>   Build without the specified cipher (bf, cast, des, dh, dsa,
                 hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha).
                 The crypto/<cipher> directory can be removed after running
                 "make depend".
 
-  -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx These system specific options will
+  -Dxxx, -lxxx, -Lxxx, -fxxx, -Kxxx These system specific options will
                 be passed through to the compiler to allow you to
                 define preprocessor symbols, specify additional libraries,
                 library directories or other compiler options.
@@ -158,8 +140,8 @@
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
      message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/support/rt.html and will be forwarded to a
-     public mailing list). Include the output of "make report" in your message.
+     via http://www.openssl.org/rt2.html and will be forwarded to a public
+     mailing list). Include the output of "make report" in your message.
      Please check out the request tracker. Maybe the bug was already
      reported or has already been fixed.
 
@@ -176,11 +158,11 @@
      If a test fails, look at the output.  There may be reasons for
      the failure that isn't a problem in OpenSSL itself (like a missing
      or malfunctioning bc).  If it is a problem with OpenSSL itself,
-     try removing any compiler optimization flags from the CFLAG line
+     try removing any compiler optimization flags from the CFLAGS line
      in Makefile.ssl and run "make clean; make". Please send a bug
      report to <openssl-bugs@openssl.org>, including the output of
      "make report" in order to be added to the request tracker at
-     http://www.openssl.org/support/rt.html.
+     http://www.openssl.org/rt2.html.
 
   4. If everything tests ok, install OpenSSL with
 
@@ -206,10 +188,6 @@
                        compile programs with libcrypto or libssl.
        lib             Contains the OpenSSL library files themselves.
 
-     Use "make install_sw" to install the software without documentation,
-     and "install_docs_html" to install HTML renditions of the manual
-     pages.
-
      Package builders who want to configure the library for standard
      locations, but have the package installed somewhere else so that
      it can easily be packaged, can use
@@ -306,10 +284,10 @@
  Note on shared libraries
  ------------------------
 
- Shared libraries have certain caveats.  Binary backward compatibility
- can't be guaranteed before OpenSSL version 1.0.  The only reason to
- use them would be to conserve memory on systems where several programs
- are using OpenSSL.
+ Shared library is currently an experimental feature.  The only reason to
+ have them would be to conserve memory on systems where several program
+ are using OpenSSL.  Binary backward compatibility can't be guaranteed
+ before OpenSSL version 1.0.
 
  For some systems, the OpenSSL Configure script knows what is needed to
  build shared libraries for libcrypto and libssl.  On these systems,
@@ -330,25 +308,3 @@
  to install additional support software to obtain random seed.
  Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
  and the FAQ for more information.
-
- Note on support for multiple builds
- -----------------------------------
-
- OpenSSL is usually built in its source tree.  Unfortunately, this doesn't
- support building for multiple platforms from the same source tree very well.
- It is however possible to build in a separate tree through the use of lots
- of symbolic links, which should be prepared like this:
-
-	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
-	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
-	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
-		mkdir -p `dirname $F`
-		rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
-		echo $F '->' $OPENSSL_SOURCE/$F
-	done
-	make -f Makefile.org clean
-
- OPENSSL_SOURCE is an environment variable that contains the absolute (this
- is important!) path to the OpenSSL source tree.
-
- Also, operations like 'make update' should still be made in the source tree.

INSTALL.DJGPP

@@ -3,45 +3,32 @@
  INSTALLATION ON THE DOS PLATFORM WITH DJGPP
  -------------------------------------------
 
- OpenSSL has been ported to DJGPP, a Unix look-alike 32-bit run-time
- environment for 16-bit DOS, but only with long filename support.
- If you wish to compile on native DOS with 8+3 filenames, you will
- have to tweak the installation yourself, including renaming files
- with illegal or duplicate names.
+ Openssl has been ported to DOS, but only with long filename support. If
+ you wish to compile on native DOS with 8+3 filenames, you will have to
+ tweak the installation yourself, including renaming files with illegal
+ or duplicate names.
 
  You should have a full DJGPP environment installed, including the
  latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
  requires that PERL and BC also be installed.
 
- All of these can be obtained from the usual DJGPP mirror sites or
- directly at "http://www.delorie.com/pub/djgpp". For help on which
- files to download, see the DJGPP "ZIP PICKER" page at
- "http://www.delorie.com/djgpp/zip-picker.html". You also need to have
- the WATT-32 networking package installed before you try to compile
- OpenSSL. This can be obtained from "http://www.bgnett.no/~giva/".
+ All of these can be obtained from the usual DJGPP mirror sites, such
+ as "ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp". You also need to
+ have the WATT-32 networking package installed before you try to compile
+ openssl. This can be obtained from "http://www.bgnett.no/~giva/".
  The Makefile assumes that the WATT-32 code is in the directory
  specified by the environment variable WATT_ROOT. If you have watt-32
  in directory "watt32" under your main DJGPP directory, specify
  WATT_ROOT="/dev/env/DJDIR/watt32".
 
- To compile OpenSSL, start your BASH shell, then configure for DJGPP by
- running "./Configure" with appropriate arguments:
-
-	./Configure no-threads --prefix=/dev/env/DJDIR DJGPP
+ To compile openssl, start your BASH shell. Then configure for DOS by
+ running "./Configure" with appropriate arguments. The basic syntax for
+ DOS is:
+ ./Configure no-threads --prefix=/dev/env/DJDIR DJGPP
  
- And finally fire up "make". You may run out of DPMI selectors when
- running in a DOS box under Windows. If so, just close the BASH
- shell, go back to Windows, and restart BASH. Then run "make" again.
+ You may run out of DPMI selectors when running in a DOS box under
+ Windows. If so, just close the BASH shell, go back to Windows, and
+ restart BASH. Then run "make" again.
 
- RUN-TIME CAVEAT LECTOR
- --------------
-
- Quoting FAQ:
-
-  "Cryptographic software needs a source of unpredictable data to work
-   correctly.  Many open source operating systems provide a "randomness
-   device" (/dev/urandom or /dev/random) that serves this purpose."
-
- As of version 0.9.7f DJGPP port checks upon /dev/urandom$ for a 3rd
- party "randomness" DOS driver. One such driver, NOISE.SYS, can be
- obtained from "http://www.rahul.net/dkaufman/index.html".
+ Building openssl under DJGPP has been tested with DJGPP 2.03,
+ GCC 2.952, GCC 2.953, perl 5.005_02 and perl 5.006_01.

INSTALL.NW

@@ -1,454 +0,0 @@
-
-INSTALLATION ON THE NETWARE PLATFORM
-------------------------------------
-
-Notes about building OpenSSL for NetWare.
-
-
-BUILD PLATFORM:
----------------
-The build scripts (batch files, perl scripts, etc) have been developed and
-tested on W2K.  The scripts should run fine on other Windows platforms
-(NT, Win9x, WinXP) but they have not been tested.  They may require some
-modifications.
-
-
-Supported NetWare Platforms - NetWare 5.x, NetWare 6.x:
--------------------------------------------------------
-OpenSSL can either use the WinSock interfaces introduced in NetWare 5,
-or the BSD socket interface.  Previous versions of NetWare, 4.x and 3.x,
-are only supported if OpenSSL is build for CLIB and BSD sockets;
-WinSock builds only support NetWare 5 and up.
-
-On NetWare there are two c-runtime libraries.  There is the legacy CLIB 
-interfaces and the newer LIBC interfaces.  Being ANSI-C libraries, the 
-functionality in CLIB and LIBC is similar but the LIBC interfaces are built 
-using Novell Kernal Services (NKS) which is designed to leverage 
-multi-processor environments.
-
-The NetWare port of OpenSSL can be configured to build using CLIB or LIBC.
-The CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LIBC 
-build was developed and tested using the NetWare 6.0 FCS.  
-
-The necessary LIBC functionality ships with NetWare 6.  However, earlier 
-NetWare 5.x versions will require updates in order to run the OpenSSL LIBC
-build (NetWare 5.1 SP8 is known to work).
-
-As of June 2005, the LIBC build can be configured to use BSD sockets instead
-of WinSock sockets. Call Configure (usually through netware\build.bat) using
-a target of "netware-libc-bsdsock" instead of "netware-libc".
-
-As of June 2007, support for CLIB and BSD sockets is also now available
-using a target of "netware-clib-bsdsock" instead of "netware-clib";
-also gcc builds are now supported on both Linux and Win32 (post 0.9.8e).
-
-REQUIRED TOOLS:
----------------
-Based upon the configuration and build options used, some or all of the
-following tools may be required:
-
-* Perl for Win32 - required (http://www.activestate.com/ActivePerl)
-   Used to run the various perl scripts on the build platform.
-
-* Perl 5.8.0 for NetWare v3.20 (or later) - required 
-   (http://developer.novell.com) Used to run the test script on NetWare 
-   after building.
-
-* Compiler / Linker - required:
-   Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare (commercial):
-      Provides command line tools used for building.
-      Tools:
-      mwccnlm.exe  - C/C++ Compiler for NetWare
-      mwldnlm.exe  - Linker for NetWare
-      mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
-
-   gcc / nlmconv Cross-Compiler, available from Novell Forge (free):
-         http://forge.novell.com/modules/xfmod/project/?aunixnw
-
-* Assemblers - optional:
-   If you intend to build using the assembly options you will need an
-   assembler.  Work has been completed to support two assemblers, Metrowerks
-   and NASM.  However, during development, a bug was found in the Metrowerks
-   assembler which generates incorrect code.  Until this problem is fixed,
-   the Metrowerks assembler cannot be used.
-
-   mwasmnlm.exe - Metrowerks x86 assembler - part of CodeWarrior tools.
-         (version 2.2 Built Aug 23, 1999 - not useable due to code
-          generation bug)
-
-   nasmw.exe - Netwide Assembler NASM
-         version 0.98 was used in development and testing
-
-* Make Tool - required:
-   In order to build you will need a make tool.  Two make tools are
-   supported, GNU make (gmake.exe) or Microsoft nmake.exe.
-
-   make.exe - GNU make for Windows (version 3.75 used for development)
-         http://gnuwin32.sourceforge.net/packages/make.htm
-
-   nmake.exe - Microsoft make (Version 6.00.8168.0 used for development)
-         http://support.microsoft.com/kb/132084/EN-US/
-
-* Novell Developer Kit (NDK) - required: (http://developer.novell.com)
-
-   CLIB - BUILDS:
-
-      WinSock2 Developer Components for NetWare:
-         For initial development, the October 27, 2000 version was used.
-         However, future versions should also work.
-
-         NOTE:  The WinSock2 components include headers & import files for
-         NetWare, but you will also need the winsock2.h and supporting
-         headers (pshpack4.h, poppack.h, qos.h) delivered in the
-         Microsoft SDK.  Note: The winsock2.h support headers may change
-         with various versions of winsock2.h.  Check the dependencies
-         section on the NDK WinSock2 download page for the latest
-         information on dependencies. These components are unsupported by
-         Novell. They are provided as a courtesy, but it is strongly
-         suggested that all development be done using LIBC, not CLIB.
-
-         As of June 2005, the WinSock2 components are available at:
-         http://forgeftp.novell.com//ws2comp/
-
-
-      NLM and NetWare libraries for C (including CLIB and XPlat):
-         If you are going to build a CLIB version of OpenSSL, you will
-         need the CLIB headers and imports.  The March, 2001 NDK release or 
-         later is recommended.
-
-         Earlier versions should work but haven't been tested.  In recent
-         versions the import files have been consolidated and function
-         names moved.  This means you may run into link problems
-         (undefined symbols) when using earlier versions.   The functions
-         are available in earlier versions, but you will have to modifiy
-         the make files to include additional import files (see
-         openssl\util\pl\netware.pl).
-
-
-   LIBC - BUILDS:
-   
-      Libraries for C (LIBC) - LIBC headers and import files
-         If you are going to build a LIBC version of OpenSSL, you will
-         need the LIBC headers and imports.  The March 14, 2002 NDK release or
-         later is required.  
-         
-         NOTE: The LIBC SDK includes the necessary WinSock2 support.
-         It is not necessary to download the WinSock2 NDK when building for
-         LIBC. The LIBC SDK also includes the appropriate BSD socket support
-         if configuring to use BSD sockets.
-
-
-BUILDING:
----------
-Before building, you will need to set a few environment variables.  You can
-set them manually or you can modify the "netware\set_env.bat" file.
-
-The set_env.bat file is a template you can use to set up the path
-and environment variables you will need to build.  Modify the
-various lines to point to YOUR tools and run set_env.bat.
-
-   netware\set_env.bat <target> [compiler]
-
-      target        - "netware-clib" - CLIB NetWare build
-                    - "netware-libc" - LIBC NetWare build
-
-      compiler      - "gnuc"         - GNU GCC Compiler
-                    - "codewarrior"  - MetroWerks CodeWarrior (default)
-
-If you don't use set_env.bat, you will need to set up the following
-environment variables:
-
-   PATH - Set PATH to point to the tools you will use.
-
-   INCLUDE - The location of the NDK include files.
-         
-            CLIB ex: set INCLUDE=c:\ndk\nwsdk\include\nlm
-            LIBC ex: set INCLUDE=c:\ndk\libc\include
-
-   PRELUDE - The absolute path of the prelude object to link with.  For
-            a CLIB build it is recommended you use the "clibpre.o" files shipped
-            with the Metrowerks PDK for NetWare.  For a LIBC build you should 
-            use the "libcpre.o" file delivered with the LIBC NDK components.
-
-            CLIB ex: set PRELUDE=c:\ndk\nwsdk\imports\clibpre.o
-            LIBC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
-
-   IMPORTS - The locaton of the NDK import files.
-
-            CLIB ex: set IMPORTS=c:\ndk\nwsdk\imports
-            LIBC ex: set IMPORTS=c:\ndk\libc\imports
-
-
-In order to build, you need to run the Perl scripts to configure the build
-process and generate a make file.  There is a batch file,
-"netware\build.bat", to automate the process.
-
-Build.bat runs the build configuration scripts and generates a make file.
-If an assembly option is specified, it also runs the scripts to generate 
-the assembly code.  Always run build.bat from the "openssl" directory.
-
-   netware\build [target] [debug opts] [assembly opts] [configure opts]
-
-      target        - "netware-clib" - CLIB NetWare build (WinSock Sockets)
-                    - "netware-clib-bsdsock" - CLIB NetWare build (BSD Sockets)
-                    - "netware-libc" - LIBC NetWare build (WinSock Sockets)
-                    - "netware-libc-bsdsock" - LIBC NetWare build (BSD Sockets)
- 
-      debug opts    - "debug"  - build debug
-
-      assembly opts - "nw-mwasm" - use Metrowerks assembler
-                      "nw-nasm"  - use NASM assembler
-                      "no-asm"   - don't use assembly
-
-      configure opts- all unrecognized arguments are passed to the
-                      perl 'configure' script. See that script for
-                      internal documentation regarding options that
-                      are available.
-
-   examples:
-
-      CLIB build, debug, without assembly:
-         netware\build.bat netware-clib debug no-asm
-
-      LIBC build, non-debug, using NASM assembly, add mdc2 support:
-         netware\build.bat netware-libc nw-nasm enable-mdc2
-
-      LIBC build, BSD sockets, non-debug, without assembly:
-         netware\build.bat netware-libc-bsdsock no-asm
-
-Running build.bat generates a make file to be processed by your make 
-tool (gmake or nmake):
-
-   CLIB ex: gmake -f netware\nlm_clib_dbg.mak 
-   LIBC ex: gmake -f netware\nlm_libc.mak 
-   LIBC ex: gmake -f netware\nlm_libc_bsdsock.mak 
-
-
-You can also run the build scripts manually if you do not want to use the
-build.bat file.  Run the following scripts in the "\openssl"
-subdirectory (in the order listed below):
-
-   perl configure no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock]
-      configures no assembly build for specified netware environment
-      (CLIB or LIBC).
-
-   perl util\mkfiles.pl >MINFO
-      generates a listing of source files (used by mk1mf)
-
-   perl util\mk1mf.pl no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock >netware\nlm.mak
-      generates the makefile for NetWare
-
-   gmake -f netware\nlm.mak
-      build with the make tool (nmake.exe also works)
-
-NOTE:  If you are building using the assembly option, you must also run the
-various Perl scripts to generate the assembly files.  See build.bat
-for an example of running the various assembly scripts.  You must use the
-"no-asm" option to build without assembly.  The configure and mk1mf scripts
-also have various other options.  See the scripts for more information.
-
-
-The output from the build is placed in the following directories:
-
-   CLIB Debug build:
-      out_nw_clib.dbg     - static libs & test nlm(s)
-      tmp_nw_clib.dbg     - temporary build files
-      outinc_nw_clib      - necessary include files
-
-   CLIB Non-debug build:
-      out_nw_clib         - static libs & test nlm(s)
-      tmp_nw_clib         - temporary build files
-      outinc_nw_clib      - necesary include files
-
-   LIBC Debug build:
-      out_nw_libc.dbg     - static libs & test nlm(s)
-      tmp_nw_libc.dbg     - temporary build files
-      outinc_nw_libc      - necessary include files
-
-   LIBC Non-debug build:
-      out_nw_libc         - static libs & test nlm(s)
-      tmp_nw_libc         - temporary build files
-      outinc_nw_libc      - necesary include files
-
-
-TESTING:
---------
-The build process creates the OpenSSL static libs ( crypto.lib, ssl.lib,
-rsaglue.lib ) and several test programs.  You should copy the test programs
-to your NetWare server and run the tests.
-
-The batch file "netware\cpy_tests.bat" will copy all the necessary files
-to your server for testing.  In order to run the batch file, you need a
-drive mapped to your target server.  It will create an "OpenSSL" directory
-on the drive and copy the test files to it.  CAUTION: If a directory with the
-name of "OpenSSL" already exists, it will be deleted.
-
-To run cpy_tests.bat:
-
-   netware\cpy_tests [output directory] [NetWare drive]
-
-      output directory - "out_nw_clib.dbg", "out_nw_libc", etc.
-      NetWare drive    - drive letter of mapped drive
-
-      CLIB ex: netware\cpy_tests out_nw_clib m:
-      LIBC ex: netware\cpy_tests out_nw_libc m:
-
-
-The Perl script, "do_tests.pl", in the "OpenSSL" directory on the server
-should be used to execute the tests.  Before running the script, make sure
-your SEARCH PATH includes the "OpenSSL" directory.  For example, if you
-copied the files to the "sys:" volume you use the command:
-
-   SEARCH ADD SYS:\OPENSSL
-
-
-To run do_tests.pl type (at the console prompt):
-
-   perl \openssl\do_tests.pl [options]
-
-      options:
-         -p    - pause after executing each test
-
-The do_tests.pl script generates a log file "\openssl\test_out\tests.log"
-which should be reviewed for errors.  Any errors will be denoted by the word
-"ERROR" in the log.
-
-DEVELOPING WITH THE OPENSSL SDK:
---------------------------------
-Now that everything is built and tested, you are ready to use the OpenSSL
-libraries in your development.
-
-There is no real installation procedure, just copy the static libs and
-headers to your build location.  The libs (crypto.lib & ssl.lib) are
-located in the appropriate "out_nw_XXXX" directory 
-(out_nw_clib, out_nw_libc, etc).  
-
-The headers are located in the appropriate "outinc_nw_XXX" directory 
-(outinc_nw_clib, outinc_nw_libc).  
-
-One suggestion is to create the following directory 
-structure for the OpenSSL SDK:
-
-   \openssl
-      |- bin
-      |   |- openssl.nlm
-      |   |- (other tests you want)
-      |
-      |- lib
-      |   | - crypto.lib
-      |   | - ssl.lib
-      |
-      |- include
-      |   | - openssl
-      |   |    | - (all the headers in "outinc_nw\openssl")
-
-
-The program "openssl.nlm" can be very useful.  It has dozens of
-options and you may want to keep it handy for debugging, testing, etc.
-
-When building your apps using OpenSSL, define "NETWARE".  It is needed by
-some of the OpenSSL headers.  One way to do this is with a compile option,
-for example "-DNETWARE".
-
-
-
-NOTES:
-------
-
-Resource leaks in Tests
-------------------------
-Some OpenSSL tests do not clean up resources and NetWare reports
-the resource leaks when the tests unload.  If this really bugs you,
-you can stop the messages by setting the developer option off at the console
-prompt (set developer option = off).  Or better yet, fix the tests to
-clean up the resources!
-
-
-Multi-threaded Development
----------------------------
-The NetWare version of OpenSSL is thread-safe, however multi-threaded
-applications must provide the necessary locking function callbacks.  This
-is described in doc\threads.doc.  The file "openssl-x.x.x\crypto\threads\mttest.c"
-is a multi-threaded test program and demonstrates the locking functions.
-
-
-What is openssl2.nlm?
----------------------
-The openssl program has numerous options and can be used for many different
-things.  Many of the options operate in an interactive mode requiring the
-user to enter data.  Because of this, a default screen is created for the
-program.  However, when running the test script it is not desirable to
-have a seperate screen.  Therefore, the build also creates openssl2.nlm.
-Openssl2.nlm is functionally identical but uses the console screen.
-Openssl2 can be used when a non-interactive mode is desired.
-
-NOTE:  There are may other possibilities (command line options, etc)
-which could have been used to address the screen issue.  The openssl2.nlm
-option was chosen because it impacted only the build not the code.
-
-
-Why only static libraries?
---------------------------
-Globals, globals, and more globals.  The OpenSSL code uses many global
-variables that are allocated and initialized when used for the first time.
-
-On NetWare, most applications (at least historically) run in the kernel.
-When running in the kernel, there is one instance of global variables.
-For regular application type NLM(s) this isn't a problem because they are
-the only ones using the globals.  However, for a library NLM (an NLM which
-exposes functions and has no threads of execution), the globals cause
-problems.  Applications could inadvertently step on each other if they
-change some globals.  Even worse, the first application that triggers a
-global to be allocated and initialized has the allocated memory charged to
-itself.  Now when that application unloads, NetWare will clean up all the
-applicaton's memory.  The global pointer variables inside OpenSSL now
-point to freed memory.  An abend waiting to happen!
-
-To work correctly in the kernel, library NLM(s) that use globals need to
-provide a set of globals (instance data) for each application.  Another
-option is to require the library only be loaded in a protected address
-space along with the application using it.
-
-Modifying the OpenSSL code to provide a set of globals (instance data) for
-each application isn't technically difficult, but due to the large number
-globals it would require substantial code changes and it wasn't done.  Hence,
-the build currently only builds static libraries which are then linked
-into each application.
-
-NOTE:  If you are building a library NLM that uses the OpenSSL static
-libraries, you will still have to deal with the global variable issue.
-This is because when you link in the OpenSSL code you bring in all the
-globals.  One possible solution for the global pointer variables is to
-register memory functions with OpenSSL which allocate memory and charge it
-to your library NLM (see the function CRYPTO_set_mem_functions).  However,
-be aware that now all memory allocated by OpenSSL is charged to your NLM.
-
-
-CodeWarrior Tools and W2K
----------------------------
-There have been problems reported with the CodeWarrior Linker
-(mwldnlm.exe) in the PDK 2.1 for NetWare when running on Windows 2000.  The
-problems cause the link step to fail.  The only work around is to obtain an
-updated linker from Metrowerks.  It is expected Metrowerks will release
-PDK 3.0 (in beta testing at this time - May, 2001) in the near future which
-will fix these problems.
-
-
-Makefile "vclean"
-------------------
-The generated makefile has a "vclean" target which cleans up the build
-directories.  If you have been building successfully and suddenly
-experience problems, use "vclean" (gmake -f netware\nlm_xxxx.mak vclean) and retry.
-
-
-"Undefined Symbol" Linker errors
---------------------------------
-There have been linker errors reported when doing a CLIB build.  The problems
-occur because some versions of the CLIB SDK import files inadvertently 
-left out some symbols.  One symbol in particular is "_lrotl".  The missing
-functions are actually delivered in the binaries, but they were left out of
-the import files.  The issues should be fixed in the September 2001 release 
-of the NDK.  If you experience the problems you can temporarily
-work around it by manually adding the missing symbols to your version of 
-"clib.imp".
-

INSTALL.VMS

@@ -71,7 +71,7 @@ the top to understand how to use them.  However, if you want to
 compile all you can get, the simplest is to use MAKEVMS.COM in the top
 directory.  The syntax is the following:
 
-  @MAKEVMS <option> <bits> <debug-p> [<compiler>]
+  @MAKEVMS <option> <rsaref-p> <debug-p> [<compiler>]
 
 <option> must be one of the following:
 
@@ -87,11 +87,24 @@ directory.  The syntax is the following:
       TEST      Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
       APPS      Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
 
-<bits> must be one of the following:
+<rsaref-p> must be one of the following:
 
-      ""        compile using default pointer size
-      32        compile using 32 bit pointer size
-      64        compile using 64 bit pointer size
+      RSAREF    compile using the RSAREF Library
+      NORSAREF  compile without using RSAREF
+
+Note 0: The RSAREF library IS NO LONGER NEEDED.  The RSA patent
+        expires September 20, 2000, and RSA Security chose to make
+        the algorithm public domain two weeks before that.
+
+Note 1: If you still want to use RSAREF, the library is NOT INCLUDED
+        and you have to download it.  RSA Security doesn't carry it
+        any more, but there are a number of places where you can find
+        it.  You have to get the ".tar-Z" file as the ".zip" file
+        doesn't have the directory structure stored.  You have to
+        extract the file into the [.RSAREF] directory as that is where
+        the scripts will look for the files.
+
+Note 2: I have never done this, so I've no idea if it works or not.
 
 <debug-p> must be one of the following:
 
@@ -104,13 +117,12 @@ directory.  The syntax is the following:
       GNUC      For GNU C.
 
 
-You will find the crypto library in [.xxx.EXE.CRYPTO] (where xxx is VAX,
-ALPHA or IA64), called SSL_LIBCRYPTO32.OLB or SSL_LIBCRYPTO.OLB depending
-on how it was built.  You will find the SSL library in [.xxx.EXE.SSL],
-named SSL_LIBSSL32.OLB or SSL_LIBSSL.OLB, and you will find a bunch of
-useful programs in [.xxx.EXE.APPS].  However, these shouldn't be used
-right off unless it's just to test them.  For production use, make sure
-you install first, see Installation below.
+You will find the crypto library in [.xxx.EXE.CRYPTO], called LIBCRYPTO.OLB,
+where xxx is VAX or AXP.  You will find the SSL library in [.xxx.EXE.SSL],
+named LIBSSL.OLB, and you will find a bunch of useful programs in
+[.xxx.EXE.APPS].  However, these shouldn't be used right off unless it's
+just to test them.  For production use, make sure you install first, see
+Installation below.
 
 Note 1: Some programs in this package require a TCP/IP library.
 
@@ -158,14 +170,12 @@ Installation:
 
 Installation is easy, just do the following:
 
-  @INSTALL <root> <bits>
+  @INSTALL <root>
 
 <root> is the directory in which everything will be installed,
 subdirectories, libraries, header files, programs and startup command
 procedures.
 
-<bits> works the same way as for MAKEVMS.COM
-
 N.B.: INSTALL.COM builds a new directory structure, different from
 the directory tree where you have now build OpenSSL.
 
@@ -186,10 +196,6 @@ following command procedures:
         sets up the symbols to the applications.  Should be called
         from for example SYS$MANAGER:SYLOGIN.COM 
 
-  OPENSSL_UNDO.COM
-
-	deassigns the logical names created with OPENSSL_STARTUP.COM.
-
 The logical names that are set up are the following:
 
   SSLROOT       a dotted concealed logical name pointing at the
@@ -197,6 +203,7 @@ The logical names that are set up are the following:
 
   SSLCERTS      Initially an empty directory, this is the default
 		location for certificate files.
+  SSLMISC	Various scripts.
   SSLPRIVATE	Initially an empty directory, this is the default
 		location for private key files.
 
@@ -204,9 +211,8 @@ The logical names that are set up are the following:
 		programs.
   SSLINCLUDE    Contains the header files needed if you want to
 		compile programs with libcrypto or libssl.
-  SSLLIB        Contains the OpenSSL library files themselves:
-  		- SSL_LIBCRYPTO32.OLB and SSL_LIBSSL32.OLB or
-		- SSL_LIBCRYPTO.OLB and SSL_LIBSSL.OLB
+  SSLLIB        Contains the OpenSSL library files (LIBCRYPTO.OLB
+		and LIBSSL.OLB) themselves.
 
   OPENSSL	Same as SSLINCLUDE.  This is because the standard
 		way to include OpenSSL header files from version
@@ -290,4 +296,4 @@ have any ideas.
 
 --
 Richard Levitte <richard@levitte.org>
-2000-02-27, 2011-03-18
+2000-02-27

INSTALL.W32

@@ -3,31 +3,40 @@
  ----------------------------------
 
  [Instructions for building for Windows CE can be found in INSTALL.WCE]
- [Instructions for building for Win64 can be found in INSTALL.W64]
 
- Here are a few comments about building OpenSSL for Win32 environments,
- such as Windows NT and Windows 9x. It should be noted though that
- Windows 9x are not ordinarily tested. Its mention merely means that we
- attempt to maintain certain programming discipline and pay attention
- to backward compatibility issues, in other words it's kind of expected
- to work on Windows 9x, but no regression tests are actually performed.
+ Heres a few comments about building OpenSSL in Windows environments.  Most
+ of this is tested on Win32 but it may also work in Win 3.1 with some
+ modification.
 
- On additional note newer OpenSSL versions are compiled and linked with
- Winsock 2. This means that minimum OS requirement was elevated to NT 4
- and Windows 98 [there is Winsock 2 update for Windows 95 though].
+ You need Perl for Win32.  Unless you will build on Cygwin, you will need
+ ActiveState Perl, available from http://www.activestate.com/ActivePerl.
+ For Cygwin users, there's more info in the Cygwin section.
 
- - you need Perl for Win32.  Unless you will build on Cygwin, you will need
-   ActiveState Perl, available from http://www.activestate.com/ActivePerl.
-
- - one of the following C compilers:
+ and one of the following C compilers:
 
   * Visual C++
   * Borland C
-  * GNU C (Cygwin or MinGW)
+  * GNU C (Mingw32 or Cygwin)
 
-- Netwide Assembler, a.k.a. NASM, available from http://nasm.sourceforge.net/
-  is required if you intend to utilize assembler modules. Note that NASM
-  is now the only supported assembler.
+ If you want to compile in the assembly language routines with Visual C++ then
+ you will need an assembler. This is worth doing because it will result in
+ faster code: for example it will typically result in a 2 times speedup in the
+ RSA routines. Currently the following assemblers are supported:
+
+  * Microsoft MASM (aka "ml")
+  * Free Netwide Assembler NASM.
+
+ MASM was at one point distributed with VC++. It is now distributed with some
+ Microsoft DDKs, for example the Windows NT 4.0 DDK and the Windows 98 DDK. If
+ you do not have either of these DDKs then you can just download the binaries
+ for the Windows 98 DDK and extract and rename the two files XXXXXml.exe and
+ XXXXXml.err, to ml.exe and ml.err and install somewhere on your PATH. Both
+ DDKs can be downloaded from the Microsoft developers site www.msdn.com.
+
+ NASM is freely available. Version 0.98 was used during testing: other versions
+ may also work. It is available from many places, see for example:
+ http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
+ The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
 
  If you are compiling from a tarball or a CVS snapshot then the Win32 files
  may well be not up to date. This may mean that some "tweaking" is required to
@@ -37,18 +46,16 @@
  Visual C++
  ----------
 
- If you want to compile in the assembly language routines with Visual
- C++, then you will need already mentioned Netwide Assembler binary,
- nasmw.exe or nasm.exe, to be available on your %PATH%.
+ Firstly you should run Configure:
 
- Firstly you should run Configure with platform VC-WIN32:
+ > perl Configure VC-WIN32
 
- > perl Configure VC-WIN32 --prefix=c:\some\openssl\dir
+ Next you need to build the Makefiles and optionally the assembly language
+ files:
 
- Where the prefix argument specifies where OpenSSL will be installed to.
+ - If you are using MASM then run:
 
- Next you need to build the Makefiles and optionally the assembly
- language files:
+   > ms\do_masm
 
  - If you are using NASM then run:
 
@@ -56,7 +63,6 @@
 
  - If you don't want to use the assembly language files at all then run:
 
-   > perl Configure VC-WIN32 no-asm --prefix=c:/some/openssl/dir
    > ms\do_ms
 
  If you get errors about things not having numbers assigned then check the
@@ -67,39 +73,30 @@
 
  > nmake -f ms\ntdll.mak
 
- If all is well it should compile and you will have some DLLs and
- executables in out32dll. If you want to try the tests then do:
+ If all is well it should compile and you will have some DLLs and executables
+ in out32dll. If you want to try the tests then do:
  
- > nmake -f ms\ntdll.mak test
-
-
- To install OpenSSL to the specified location do:
-
- > nmake -f ms\ntdll.mak install
+ > cd out32dll
+ > ..\ms\test
 
  Tweaks:
 
- There are various changes you can make to the Win32 compile
- environment. By default the library is not compiled with debugging
- symbols. If you use the platform debug-VC-WIN32 instead of VC-WIN32
- then debugging symbols will be compiled in.
-
- By default in 1.0.0 OpenSSL will compile builtin ENGINES into the
- separate shared librariesy. If you specify the "enable-static-engine"
- option on the command line to Configure the shared library build
- (ms\ntdll.mak) will compile the engines into libeay32.dll instead.
+ There are various changes you can make to the Win32 compile environment. By
+ default the library is not compiled with debugging symbols. If you add 'debug'
+ to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
+ compiled in. Note that mk1mf.pl expects the platform to be the last argument
+ on the command line, so 'debug' must appear before that, as all other options.
 
  The default Win32 environment is to leave out any Windows NT specific
  features.
 
- If you want to enable the NT specific features of OpenSSL (currently
- only the logging BIO) follow the instructions above but call the batch
- file do_nt.bat instead of do_ms.bat.
+ If you want to enable the NT specific features of OpenSSL (currently only the
+ logging BIO) follow the instructions above but call the batch file do_nt.bat
+ instead of do_ms.bat.
 
  You can also build a static version of the library using the Makefile
  ms\nt.mak
 
-
  Borland C++ builder 5
  ---------------------
 
@@ -122,31 +119,62 @@
  * Run make:
    > make -f bcb.mak
 
+ GNU C (Mingw32)
+ ---------------
+
+ To build OpenSSL, you need the Mingw32 package and GNU make.
+
+ * Compiler installation:
+
+   Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/
+   gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. Extract it
+   to a directory such as C:\gcc-2.95.2 and add c:\gcc-2.95.2\bin to
+   the PATH environment variable in "System Properties"; or edit and
+   run C:\gcc-2.95.2\mingw32.bat to set the PATH.
+
+ * Compile OpenSSL:
+
+   > ms\mingw32
+
+   This will create the library and binaries in out. In case any problems
+   occur, try
+   > ms\mingw32 no-asm
+   instead.
+
+   libcrypto.a and libssl.a are the static libraries. To use the DLLs,
+   link with libeay32.a and libssl32.a instead.
+
+   See troubleshooting if you get error messages about functions not having
+   a number assigned.
+
+ * You can now try the tests:
+
+   > cd out
+   > ..\ms\test
+
  GNU C (Cygwin)
  --------------
 
- Cygwin implements a Posix/Unix runtime system (cygwin1.dll) on top of
- Win32 subsystem and provides a bash shell and GNU tools environment.
- Consequently, a make of OpenSSL with Cygwin is virtually identical to
- Unix procedure. It is also possible to create Win32 binaries that only
- use the Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
- MinGW. MinGW can be used in the Cygwin development environment or in a
- standalone setup as described in the following section.
+ Cygwin provides a bash shell and GNU tools environment running
+ on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
+ Consequently, a make of OpenSSL with Cygwin is closer to a GNU
+ bash environment such as Linux than to other W32 makes which are
+ based on a single makefile approach. Cygwin implements Posix/Unix
+ calls through cygwin1.dll, and is contrasted to Mingw32 which links
+ dynamically to msvcrt.dll or crtdll.dll.
 
  To build OpenSSL using Cygwin:
 
  * Install Cygwin (see http://cygwin.com/)
 
- * Install Perl and ensure it is in the path. Both Cygwin perl
-   (5.6.1-2 or newer) and ActivePerl work.
+ * Install Perl and ensure it is in the path (recent Cygwin perl 
+   (version 5.6.1-2 of the latter has been reported to work) or
+   ActivePerl)
 
  * Run the Cygwin bash shell
 
  * $ tar zxvf openssl-x.x.x.tar.gz
    $ cd openssl-x.x.x
-
-   To build the Cygwin version of OpenSSL:
-
    $ ./config
    [...]
    $ make
@@ -154,16 +182,7 @@
    $ make test
    $ make install
 
-   This will create a default install in /usr/local/ssl.
-
-   To build the MinGW version (native Windows) in Cygwin:
-
-   $ ./Configure mingw
-   [...]
-   $ make
-   [...]
-   $ make test
-   $ make install
+ This will create a default install in /usr/local/ssl.
 
  Cygwin Notes:
 
@@ -176,44 +195,6 @@
  non-fatal error in "make test" but is otherwise harmless.  If
  desired and needed, GNU bc can be built with Cygwin without change.
 
- GNU C (MinGW/MSYS)
- -------------
-
- * Compiler and shell environment installation:
-
-   MinGW and MSYS are available from http://www.mingw.org/, both are
-   required. Run the installers and do whatever magic they say it takes
-   to start MSYS bash shell with GNU tools on its PATH.
-
-   N.B. Since source tar-ball can contain symbolic links, it's essential
-   that you use accompanying MSYS tar to unpack the source. It will
-   either handle them in one way or another or fail to extract them,
-   which does the trick too. Latter means that you may safely ignore all
-   "cannot create symlink" messages, as they will be "re-created" at
-   configure stage by copying corresponding files. Alternative programs
-   were observed to create empty files instead, which results in build
-   failure.
-
- * Compile OpenSSL:
-
-   $ ./config
-   [...]
-   $ make
-   [...]
-   $ make test
-
-   This will create the library and binaries in root source directory
-   and openssl.exe application in apps directory.
-
-   It is also possible to cross-compile it on Linux by configuring
-   with './Configure --cross-compile-prefix=i386-mingw32- mingw ...'.
-   'make test' is naturally not applicable then.
-
-   libcrypto.a and libssl.a are the static libraries. To use the DLLs,
-   link with libeay32.a and libssl32.a instead.
-
-   See troubleshooting if you get error messages about functions not
-   having a number assigned.
 
  Installation
  ------------
@@ -233,7 +214,7 @@
 	$ md c:\openssl\lib
 	$ md c:\openssl\include
 	$ md c:\openssl\include\openssl
-	$ copy /b inc32\openssl\*       c:\openssl\include\openssl
+	$ copy /b inc32\*               c:\openssl\include\openssl
 	$ copy /b out32dll\ssleay32.lib c:\openssl\lib
 	$ copy /b out32dll\libeay32.lib c:\openssl\lib
 	$ copy /b out32dll\ssleay32.dll c:\openssl\bin
@@ -294,32 +275,3 @@
  (e.g. fopen()), and OpenSSL cannot change these; so in general you cannot
  rely on CRYPTO_malloc_init() solving your problem, and you should
  consistently use the multithreaded library.
-
- Linking your application
- ------------------------
-
- If you link with static OpenSSL libraries [those built with ms/nt.mak],
- then you're expected to additionally link your application with
- WS2_32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing
- non-interactive service applications might feel concerned about linking
- with the latter two, as they are justly associated with interactive
- desktop, which is not available to service processes. The toolkit is
- designed to detect in which context it's currently executed, GUI,
- console app or service, and act accordingly, namely whether or not to
- actually make GUI calls. Additionally those who wish to
- /DELAYLOAD:GDI32.DLL and /DELAYLOAD:USER32.DLL and actually keep them
- off service process should consider implementing and exporting from
- .exe image in question own _OPENSSL_isservice not relying on USER32.DLL.
- E.g., on Windows Vista and later you could:
-
-	__declspec(dllexport) __cdecl BOOL _OPENSSL_isservice(void)
-	{   DWORD sess;
-	    if (ProcessIdToSessionId(GetCurrentProcessId(),&sess))
-	        return sess==0;
-	    return FALSE;
-	}
-
- If you link with OpenSSL .DLLs, then you're expected to include into
- your application code small "shim" snippet, which provides glue between
- OpenSSL BIO layer and your compiler run-time. Look up OPENSSL_Applink
- reference page for further details.

INSTALL.W64

@@ -1,66 +0,0 @@
-
- INSTALLATION ON THE WIN64 PLATFORM
- ----------------------------------
-
- Caveat lector
- -------------
-
- As of moment of this writing Win64 support is classified "initial"
- for the following reasons.
-
- - No assembler modules are engaged upon initial 0.9.8 release.
- - API might change within 0.9.8 life-span, *but* in a manner which
-   doesn't break backward binary compatibility. Or in other words,
-   application programs compiled with initial 0.9.8 headers will
-   be expected to work with future minor release .DLL without need
-   to re-compile, even if future minor release features modified API.
- - Above mentioned API modifications have everything to do with
-   elimination of a number of limitations, which are normally
-   considered inherent to 32-bit platforms. Which in turn is why they
-   are treated as limitations on 64-bit platform such as Win64:-)
-   The current list comprises [but not necessarily limited to]:
-
-   - null-terminated strings may not be longer than 2G-1 bytes,
-     longer strings are treated as zero-length;
-   - dynamically and *internally* allocated chunks can't be larger
-     than 2G-1 bytes;
-   - inability to encrypt/decrypt chunks of data larger than 4GB
-     [it's possibly to *hash* chunks of arbitrary size through];
-
-   Neither of these is actually big deal and hardly encountered
-   in real-life applications.
-
- Compiling procedure
- -------------------
-
- You will need Perl. You can run under Cygwin or you can download
- ActiveState Perl from http://www.activestate.com/ActivePerl.
-
- You will need Microsoft Platform SDK, available for download at
- http://www.microsoft.com/msdownload/platformsdk/sdkupdate/. As per
- April 2005 Platform SDK is equipped with Win64 compilers, as well
- as assemblers, but it might change in the future.
-
- To build for Win64/x64:
-
- > perl Configure VC-WIN64A
- > ms\do_win64a
- > nmake -f ms\ntdll.mak
- > cd out32dll
- > ..\ms\test
-
- To build for Win64/IA64:
-
- > perl Configure VC-WIN64I
- > ms\do_win64i
- > nmake -f ms\ntdll.mak
- > cd out32dll
- > ..\ms\test
-
- Naturally test-suite itself has to be executed on the target platform.
-
- Installation
- ------------
-
- TBD, for now see INSTALL.W32.
-

INSTALL.WCE

@@ -4,36 +4,24 @@
 
  Building OpenSSL for Windows CE requires the following external tools:
 
-  * Microsoft eMbedded Visual C++ 3.0 or later
-  * Appropriate SDK might be required
-  * Perl for Win32 [commonly recommended ActiveState Perl is available
-    from http://www.activestate.com/Products/ActivePerl/]
+  * Microsoft eMbedded Visual C++ 3.0
+  * wcecompat compatibility library (www.essemer.com.au)
+  * Optionally ceutils for running automated tests (www.essemer.com.au)
 
-  * wcecompat compatibility library available at
-    http://www.essemer.com.au/windowsce/
-  * Optionally ceutils for running automated tests (same location)
+ You also need Perl for Win32.  You will need ActiveState Perl, available
+ from http://www.activestate.com/ActivePerl.
 
-  _or_
+ Windows CE support in OpenSSL relies on wcecompat.  All Windows CE specific
+ issues should be directed to www.essemer.com.au.
 
-  * PocketConsole driver and PortSDK available at
-    http://www.symbolictools.de/public/pocketconsole/
-  * CMD command interpreter (same location)
-
- As Windows CE support in OpenSSL relies on 3rd party compatibility
- library, it's appropriate to check corresponding URL for updates. For
- example if you choose wcecompat, note that as for the moment of this
- writing version 1.2 is available and actually required for WCE 4.2
- and newer platforms. All wcecompat issues should be directed to
- www.essemer.com.au.
-
- Why compatibility library at all? The C Runtime Library implementation
- for Windows CE that is included with Microsoft eMbedded Visual C++ is
- incomplete and in some places incorrect.  Compatibility library plugs
- the holes and tries to bring the Windows CE CRT to [more] usable level.
- Most gaping hole in CRT is support for stdin/stdout/stderr IO, which
- proposed compatibility libraries solve in two different ways: wcecompat
- redirects IO to active sync link, while PortSDK - to NT-like console
- driver on the handheld itself.
+ The C Runtime Library implementation for Windows CE that is included with
+ Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places
+ incorrect.  wcecompat plugs the holes and tries to bring the Windows CE
+ CRT to a level that is more compatible with ANSI C.  wcecompat goes further
+ and provides low-level IO and stream IO support for stdin/stdout/stderr
+ (which Windows CE does not provide).  This IO functionality is not needed
+ by the OpenSSL library itself but is used for the tests and openssl.exe.
+ More information is available at www.essemer.com.au.
 
  Building
  --------
@@ -43,21 +31,9 @@
 
  > "C:\Program Files\Microsoft eMbedded Tools\EVC\WCE300\BIN\WCEARM.BAT"
 
- Next pick compatibility library according to your preferences.
+ Next indicate where wcecompat is located:
 
- 1. To choose wcecompat set up WCECOMPAT environment variable pointing
-    at the location of wcecompat tree "root":
-
-    > set WCECOMPAT=C:\wcecompat
-    > set PORTSDK_LIBPATH=
-
- 2. To choose PortSDK set up PORTSDK_LIBPATH to point at hardware-
-    specific location where your portlib.lib is installed:
-
-    > set PORTSDK_LIBPATH=C:\PortSDK\lib\ARM
-    > set WCECOMPAT=
-
- Note that you may not set both variables.
+ > set WCECOMPAT=C:\wcecompat
 
  Next you should run Configure:
 
@@ -73,16 +49,16 @@
 
  Then from the VC++ environment at a prompt do:
 
+ - to build static libraries:
+
+   > nmake -f ms\ce.mak
+
+ - or to build DLLs:
+
    > nmake -f ms\cedll.mak
 
- [note that static builds are not supported under CE]
-
- If all is well it should compile and you will have some DLLs and executables
- in out32dll*. 
-
- <<< everyting below needs revision in respect to wcecompat vs. PortSDK >>>
-
- If you want
+ If all is well it should compile and you will have some static libraries and
+ executables in out32, or some DLLs and executables in out32dll.  If you want
  to try the tests then make sure the ceutils are in the path and do:
  
  > cd out32

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2011 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

MacOS/GUSI_Init.cpp

@@ -0,0 +1,62 @@
+/**************** BEGIN GUSI CONFIGURATION ****************************
+ *
+ * GUSI Configuration section generated by GUSI Configurator
+ * last modified: Wed Jan  5 20:33:51 2000
+ *
+ * This section will be overwritten by the next run of Configurator.
+ */
+
+#define GUSI_SOURCE
+#include <GUSIConfig.h>
+#include <sys/cdefs.h>
+
+/* Declarations of Socket Factories */
+
+__BEGIN_DECLS
+void GUSIwithInetSockets();
+void GUSIwithLocalSockets();
+void GUSIwithMTInetSockets();
+void GUSIwithMTTcpSockets();
+void GUSIwithMTUdpSockets();
+void GUSIwithOTInetSockets();
+void GUSIwithOTTcpSockets();
+void GUSIwithOTUdpSockets();
+void GUSIwithPPCSockets();
+void GUSISetupFactories();
+__END_DECLS
+
+/* Configure Socket Factories */
+
+void GUSISetupFactories()
+{
+#ifdef GUSISetupFactories_BeginHook
+	GUSISetupFactories_BeginHook
+#endif
+	GUSIwithInetSockets();
+#ifdef GUSISetupFactories_EndHook
+	GUSISetupFactories_EndHook
+#endif
+}
+
+/* Declarations of File Devices */
+
+__BEGIN_DECLS
+void GUSIwithDConSockets();
+void GUSIwithNullSockets();
+void GUSISetupDevices();
+__END_DECLS
+
+/* Configure File Devices */
+
+void GUSISetupDevices()
+{
+#ifdef GUSISetupDevices_BeginHook
+	GUSISetupDevices_BeginHook
+#endif
+	GUSIwithNullSockets();
+#ifdef GUSISetupDevices_EndHook
+	GUSISetupDevices_EndHook
+#endif
+}
+
+/**************** END GUSI CONFIGURATION *************************/

MacOS/GetHTTPS.src/CPStringUtils.hpp

@@ -0,0 +1,104 @@
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void CopyPStrToCStr(const unsigned char *thePStr,char *theCStr,const int maxCStrLength);
+void CopyPStrToPStr(const unsigned char *theSrcPStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void CopyCStrToCStr(const char *theSrcCStr,char *theDstCStr,const int maxDstStrLength);
+void CopyCStrToPStr(const char *theSrcCStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void ConcatPStrToCStr(const unsigned char *thePStr,char *theCStr,const int maxCStrLength);
+void ConcatPStrToPStr(const unsigned char *theSrcPStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void ConcatCStrToPStr(const char *theSrcCStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void ConcatCStrToCStr(const char *theSrcCStr,char *theDstCStr,const int maxCStrLength);
+
+void ConcatCharToCStr(const char theChar,char *theDstCStr,const int maxCStrLength);
+void ConcatCharToPStr(const char theChar,unsigned char *theDstPStr,const int maxPStrLength);
+
+int ComparePStrs(const unsigned char *theFirstPStr,const unsigned char *theSecondPStr,const Boolean ignoreCase = true);
+int CompareCStrs(const char *theFirstCStr,const char *theSecondCStr,const Boolean ignoreCase = true);
+int CompareCStrToPStr(const char *theCStr,const unsigned char *thePStr,const Boolean ignoreCase = true);
+
+Boolean CStrsAreEqual(const char *theFirstCStr,const char *theSecondCStr,const Boolean ignoreCase = true);
+Boolean PStrsAreEqual(const unsigned char *theFirstCStr,const unsigned char *theSecondCStr,const Boolean ignoreCase = true);
+
+void CopyLongIntToCStr(const long theNum,char *theCStr,const int maxCStrLength,const int numDigits = -1);
+void CopyUnsignedLongIntToCStr(const unsigned long theNum,char *theCStr,const int maxCStrLength);
+void ConcatLongIntToCStr(const long theNum,char *theCStr,const int maxCStrLength,const int numDigits = -1);
+void CopyCStrAndConcatLongIntToCStr(const char *theSrcCStr,const long theNum,char *theDstCStr,const int maxDstStrLength);
+
+void CopyLongIntToPStr(const long theNum,unsigned char *thePStr,const int maxPStrLength,const int numDigits = -1);
+void ConcatLongIntToPStr(const long theNum,unsigned char *thePStr,const int maxPStrLength,const int numDigits = -1);
+
+long CStrLength(const char *theCString);
+long PStrLength(const unsigned char *thePString);
+
+OSErr CopyCStrToExistingHandle(const char *theCString,Handle theHandle);
+OSErr CopyLongIntToExistingHandle(const long inTheLongInt,Handle theHandle);
+
+OSErr CopyCStrToNewHandle(const char *theCString,Handle *theHandle);
+OSErr CopyPStrToNewHandle(const unsigned char *thePString,Handle *theHandle);
+OSErr CopyLongIntToNewHandle(const long inTheLongInt,Handle *theHandle);
+
+OSErr AppendCStrToHandle(const char *theCString,Handle theHandle,long *currentLength = nil,long *maxLength = nil);
+OSErr AppendCharsToHandle(const char *theChars,const int numChars,Handle theHandle,long *currentLength = nil,long *maxLength = nil);
+OSErr AppendPStrToHandle(const unsigned char *thePString,Handle theHandle,long *currentLength = nil);
+OSErr AppendLongIntToHandle(const long inTheLongInt,Handle theHandle,long *currentLength = nil);
+
+void ZeroMem(void *theMemPtr,const unsigned long numBytes);
+
+char *FindCharInCStr(const char theChar,const char *theCString);
+long FindCharOffsetInCStr(const char theChar,const char *theCString,const Boolean inIgnoreCase = false);
+long FindCStrOffsetInCStr(const char *theCSubstring,const char *theCString,const Boolean inIgnoreCase = false);
+
+void CopyCSubstrToCStr(const char *theSrcCStr,const int maxCharsToCopy,char *theDstCStr,const int maxDstStrLength);
+void CopyCSubstrToPStr(const char *theSrcCStr,const int maxCharsToCopy,unsigned char *theDstPStr,const int maxDstStrLength);
+
+void InsertCStrIntoCStr(const char *theSrcCStr,const int theInsertionOffset,char *theDstCStr,const int maxDstStrLength);
+void InsertPStrIntoCStr(const unsigned char *theSrcPStr,const int theInsertionOffset,char *theDstCStr,const int maxDstStrLength);
+OSErr InsertCStrIntoHandle(const char *theCString,Handle theHandle,const long inInsertOffset);
+
+void CopyCStrAndInsertCStrIntoCStr(const char *theSrcCStr,const char *theInsertCStr,char *theDstCStr,const int maxDstStrLength);
+
+void CopyCStrAndInsertCStrsLongIntsIntoCStr(const char *theSrcCStr,const char **theInsertCStrs,const long *theLongInts,char *theDstCStr,const int maxDstStrLength);
+
+void CopyCStrAndInsert1LongIntIntoCStr(const char *theSrcCStr,const long theNum,char *theDstCStr,const int maxDstStrLength);
+void CopyCStrAndInsert2LongIntsIntoCStr(const char *theSrcCStr,const long long1,const long long2,char *theDstCStr,const int maxDstStrLength);
+void CopyCStrAndInsert3LongIntsIntoCStr(const char *theSrcCStr,const long long1,const long long2,const long long3,char *theDstCStr,const int maxDstStrLength);
+
+void CopyCStrAndInsertCStrLongIntIntoCStr(const char *theSrcCStr,const char *theInsertCStr,const long theNum,char *theDstCStr,const int maxDstStrLength);
+OSErr CopyCStrAndInsertCStrLongIntIntoHandle(const char *theSrcCStr,const char *theInsertCStr,const long theNum,Handle *theHandle);
+
+
+OSErr CopyIndexedWordToCStr(char *theSrcCStr,int whichWord,char *theDstCStr,int maxDstCStrLength);
+OSErr CopyIndexedWordToNewHandle(char *theSrcCStr,int whichWord,Handle *outTheHandle);
+
+OSErr CopyIndexedLineToCStr(const char *theSrcCStr,int inWhichLine,int *lineEndIndex,Boolean *gotLastLine,char *theDstCStr,const int maxDstCStrLength);
+OSErr CopyIndexedLineToNewHandle(const char *theSrcCStr,int inWhichLine,Handle *outNewHandle);
+
+OSErr ExtractIntFromCStr(const char *theSrcCStr,int *outInt,Boolean skipLeadingSpaces = true);
+OSErr ExtractIntFromPStr(const unsigned char *theSrcPStr,int *outInt,Boolean skipLeadingSpaces = true);
+
+
+void ConvertCStrToUpperCase(char *theSrcCStr);
+
+
+int CountOccurencesOfCharInCStr(const char inChar,const char *inSrcCStr);
+int CountWordsInCStr(const char *inSrcCStr);
+
+OSErr CountDigits(const char *inCStr,int *outNumIntegerDigits,int *outNumFractDigits);
+
+void ExtractCStrItemFromCStr(const char *inSrcCStr,const char inItemDelimiter,const int inItemNumber,Boolean *foundItem,char *outDstCharPtr,const int inDstCharPtrMaxLength,const Boolean inTreatMultipleDelimsAsSingleDelim = false);
+OSErr ExtractCStrItemFromCStrIntoNewHandle(const char *inSrcCStr,const char inItemDelimiter,const int inItemNumber,Boolean *foundItem,Handle *outNewHandle,const Boolean inTreatMultipleDelimsAsSingleDelim = false);
+
+
+OSErr ExtractFloatFromCStr(const char *inCString,extended80 *outFloat);
+OSErr CopyFloatToCStr(const extended80 *theFloat,char *theCStr,const int maxCStrLength,const int inMaxNumIntDigits = -1,const int inMaxNumFractDigits = -1);
+
+void SkipWhiteSpace(char **ioSrcCharPtr,const Boolean inStopAtEOL = false);
+
+
+#ifdef __cplusplus
+}
+#endif

MacOS/GetHTTPS.src/ErrorHandling.cpp

@@ -1,6 +1,5 @@
-/* crypto/bn/bn_depr.c */
 /* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-1999 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -52,61 +51,120 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
+ 
+ 
+ 
+ #include "ErrorHandling.hpp"
+#include "CPStringUtils.hpp"
 
-/* Support for deprecated functions goes here - static linkage will only slurp
- * this code if applications are using them directly. */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-#include <openssl/rand.h>
-
-static void *dummy=&dummy;
-
-#ifndef OPENSSL_NO_DEPRECATED
-BIGNUM *BN_generate_prime(BIGNUM *ret, int bits, int safe,
-	const BIGNUM *add, const BIGNUM *rem,
-	void (*callback)(int,int,void *), void *cb_arg)
-	{
-	BN_GENCB cb;
-	BIGNUM *rnd=NULL;
-	int found = 0;
-
-	BN_GENCB_set_old(&cb, callback, cb_arg);
-
-	if (ret == NULL)
-		{
-		if ((rnd=BN_new()) == NULL) goto err;
-		}
-	else
-		rnd=ret;
-	if(!BN_generate_prime_ex(rnd, bits, safe, add, rem, &cb))
-		goto err;
-
-	/* we have a prime :-) */
-	found = 1;
-err:
-	if (!found && (ret == NULL) && (rnd != NULL)) BN_free(rnd);
-	return(found ? rnd : NULL);
-	}
-
-int BN_is_prime(const BIGNUM *a, int checks, void (*callback)(int,int,void *),
-	BN_CTX *ctx_passed, void *cb_arg)
-	{
-	BN_GENCB cb;
-	BN_GENCB_set_old(&cb, callback, cb_arg);
-	return BN_is_prime_ex(a, checks, ctx_passed, &cb);
-	}
-
-int BN_is_prime_fasttest(const BIGNUM *a, int checks,
-		void (*callback)(int,int,void *),
-		BN_CTX *ctx_passed, void *cb_arg,
-		int do_trial_division)
-	{
-	BN_GENCB cb;
-	BN_GENCB_set_old(&cb, callback, cb_arg);
-	return BN_is_prime_fasttest_ex(a, checks, ctx_passed,
-				do_trial_division, &cb);
-	}
+#ifdef __EXCEPTIONS_ENABLED__
+	#include "CMyException.hpp"
 #endif
+
+
+static char					gErrorMessageBuffer[512];
+
+char 						*gErrorMessage = gErrorMessageBuffer;
+int							gErrorMessageMaxLength = sizeof(gErrorMessageBuffer);
+
+
+
+void SetErrorMessage(const char *theErrorMessage)
+{
+	if (theErrorMessage != nil)
+	{
+		CopyCStrToCStr(theErrorMessage,gErrorMessage,gErrorMessageMaxLength);
+	}
+}
+
+
+void SetErrorMessageAndAppendLongInt(const char *theErrorMessage,const long theLongInt)
+{
+	if (theErrorMessage != nil)
+	{
+		CopyCStrAndConcatLongIntToCStr(theErrorMessage,theLongInt,gErrorMessage,gErrorMessageMaxLength);
+	}
+}
+
+void SetErrorMessageAndCStrAndLongInt(const char *theErrorMessage,const char * theCStr,const long theLongInt)
+{
+	if (theErrorMessage != nil)
+	{
+		CopyCStrAndInsertCStrLongIntIntoCStr(theErrorMessage,theCStr,theLongInt,gErrorMessage,gErrorMessageMaxLength);
+	}
+
+}
+
+void SetErrorMessageAndCStr(const char *theErrorMessage,const char * theCStr)
+{
+	if (theErrorMessage != nil)
+	{
+		CopyCStrAndInsertCStrLongIntIntoCStr(theErrorMessage,theCStr,-1,gErrorMessage,gErrorMessageMaxLength);
+	}
+}
+
+
+void AppendCStrToErrorMessage(const char *theErrorMessage)
+{
+	if (theErrorMessage != nil)
+	{
+		ConcatCStrToCStr(theErrorMessage,gErrorMessage,gErrorMessageMaxLength);
+	}
+}
+
+
+void AppendLongIntToErrorMessage(const long theLongInt)
+{
+	ConcatLongIntToCStr(theLongInt,gErrorMessage,gErrorMessageMaxLength);
+}
+
+
+
+char *GetErrorMessage(void)
+{
+	return gErrorMessage;
+}
+
+
+OSErr GetErrorMessageInNewHandle(Handle *inoutHandle)
+{
+OSErr		errCode;
+
+
+	errCode = CopyCStrToNewHandle(gErrorMessage,inoutHandle);
+	
+	return(errCode);
+}
+
+
+OSErr GetErrorMessageInExistingHandle(Handle inoutHandle)
+{
+OSErr		errCode;
+
+
+	errCode = CopyCStrToExistingHandle(gErrorMessage,inoutHandle);
+	
+	return(errCode);
+}
+
+
+
+OSErr AppendErrorMessageToHandle(Handle inoutHandle)
+{
+OSErr		errCode;
+
+
+	errCode = AppendCStrToHandle(gErrorMessage,inoutHandle,nil);
+	
+	return(errCode);
+}
+
+
+#ifdef __EXCEPTIONS_ENABLED__
+
+void ThrowErrorMessageException(void)
+{
+	ThrowDescriptiveException(gErrorMessage);
+}
+
+#endif

MacOS/GetHTTPS.src/ErrorHandling.hpp

@@ -0,0 +1,147 @@
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef kGenericError
+	#define kGenericError		-1
+#endif
+
+extern char	*gErrorMessage;
+
+
+void SetErrorMessage(const char *theErrorMessage);
+void SetErrorMessageAndAppendLongInt(const char *theErrorMessage,const long theLongInt);
+void SetErrorMessageAndCStrAndLongInt(const char *theErrorMessage,const char * theCStr,const long theLongInt);
+void SetErrorMessageAndCStr(const char *theErrorMessage,const char * theCStr);
+void AppendCStrToErrorMessage(const char *theErrorMessage);
+void AppendLongIntToErrorMessage(const long theLongInt);
+
+
+char *GetErrorMessage(void);
+OSErr GetErrorMessageInNewHandle(Handle *inoutHandle);
+OSErr GetErrorMessageInExistingHandle(Handle inoutHandle);
+OSErr AppendErrorMessageToHandle(Handle inoutHandle);
+
+
+#ifdef __EXCEPTIONS_ENABLED__
+	void ThrowErrorMessageException(void);
+#endif
+
+
+
+//	A bunch of evil macros that would be uneccessary if I were always using C++ !
+
+#define SetErrorMessageAndBailIfNil(theArg,theMessage)								\
+{																					\
+	if (theArg == nil)																\
+	{																				\
+		SetErrorMessage(theMessage);												\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageAndBail(theMessage)											\
+{																					\
+		SetErrorMessage(theMessage);												\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+}
+
+
+#define SetErrorMessageAndLongIntAndBail(theMessage,theLongInt)						\
+{																					\
+		SetErrorMessageAndAppendLongInt(theMessage,theLongInt);						\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+}
+
+
+#define SetErrorMessageAndLongIntAndBailIfError(theErrCode,theMessage,theLongInt)	\
+{																					\
+	if (theErrCode != noErr)														\
+	{																				\
+		SetErrorMessageAndAppendLongInt(theMessage,theLongInt);						\
+		errCode = theErrCode;														\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageCStrLongIntAndBailIfError(theErrCode,theMessage,theCStr,theLongInt)	\
+{																					\
+	if (theErrCode != noErr)														\
+	{																				\
+		SetErrorMessageAndCStrAndLongInt(theMessage,theCStr,theLongInt);			\
+		errCode = theErrCode;														\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageAndCStrAndBail(theMessage,theCStr)							\
+{																					\
+	SetErrorMessageAndCStr(theMessage,theCStr);										\
+	errCode = kGenericError;														\
+	goto EXITPOINT;																	\
+}
+
+
+#define SetErrorMessageAndBailIfError(theErrCode,theMessage)						\
+{																					\
+	if (theErrCode != noErr)														\
+	{																				\
+		SetErrorMessage(theMessage);												\
+		errCode = theErrCode;														\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageAndLongIntAndBailIfNil(theArg,theMessage,theLongInt)			\
+{																					\
+	if (theArg == nil)																\
+	{																				\
+		SetErrorMessageAndAppendLongInt(theMessage,theLongInt);						\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define BailIfError(theErrCode)														\
+{																					\
+	if ((theErrCode) != noErr)														\
+	{																				\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrCodeAndBail(theErrCode)												\
+{																					\
+	errCode = theErrCode;															\
+																					\
+	goto EXITPOINT;																	\
+}
+
+
+#define SetErrorCodeAndMessageAndBail(theErrCode,theMessage)						\
+{																					\
+	SetErrorMessage(theMessage);													\
+	errCode = theErrCode;															\
+	goto EXITPOINT;																	\
+}
+
+
+#define BailNow()																	\
+{																					\
+	errCode = kGenericError;														\
+	goto EXITPOINT;																	\
+}
+
+
+#ifdef __cplusplus
+}
+#endif

MacOS/GetHTTPS.src/GetHTTPS.cpp

@@ -0,0 +1,209 @@
+/*
+ *	An demo illustrating how to retrieve a URI from a secure HTTP server.
+ *
+ *	Author: 	Roy Wood
+ *	Date:		September 7, 1999
+ *	Comments:	This relies heavily on my MacSockets library.
+ *				This project is also set up so that it expects the OpenSSL source folder (0.9.4 as I write this)
+ *				to live in a folder called "OpenSSL-0.9.4" in this project's parent folder.  For example:
+ *
+ *					Macintosh HD:
+ *						Development:
+ *							OpenSSL-0.9.4:
+ *								(OpenSSL sources here)
+ *							OpenSSL Example:
+ *								(OpenSSL example junk here)
+ *
+ *
+ *				Also-- before attempting to compile this, make sure the aliases in "OpenSSL-0.9.4:include:openssl" 
+ *				are installed!  Use the AppleScript applet in the "openssl-0.9.4" folder to do this!
+ */
+/* modified to seed the PRNG */
+/* modified to use CRandomizer for seeding */
+
+
+//	Include some funky libs I've developed over time
+
+#include "CPStringUtils.hpp"
+#include "ErrorHandling.hpp"
+#include "MacSocket.h"
+#include "Randomizer.h"
+
+//	We use the OpenSSL implementation of SSL....
+//	This was a lot of work to finally get going, though you wouldn't know it by the results!
+
+#include <openssl/ssl.h>
+#include <openssl/err.h>
+
+#include <timer.h>
+
+//	Let's try grabbing some data from here:
+
+#define kHTTPS_DNS		"www.apache-ssl.org"
+#define kHTTPS_Port		443
+#define kHTTPS_URI		"/"
+
+
+//	Forward-declare this
+
+OSErr MyMacSocket_IdleWaitCallback(void *inUserRefPtr);
+
+//	My idle-wait callback.  Doesn't do much, does it?  Silly cooperative multitasking.
+
+OSErr MyMacSocket_IdleWaitCallback(void *inUserRefPtr)
+{
+#pragma unused(inUserRefPtr)
+
+EventRecord		theEvent;
+	::EventAvail(everyEvent,&theEvent);
+	
+	CRandomizer *randomizer = (CRandomizer*)inUserRefPtr;
+	if (randomizer)
+		randomizer->PeriodicAction();
+
+	return(noErr);
+}
+
+
+//	Finally!
+
+void main(void)
+{
+	OSErr				errCode;
+	int					theSocket = -1;
+	int					theTimeout = 30;
+
+	SSL_CTX				*ssl_ctx = nil;
+	SSL					*ssl = nil;
+
+	char				tempString[256];
+	UnsignedWide		microTickCount;
+
+
+	CRandomizer randomizer;
+	
+	printf("OpenSSL Demo by Roy Wood, roy@centricsystems.ca\n\n");
+	
+	BailIfError(errCode = MacSocket_Startup());
+
+
+
+	//	Create a socket-like object
+	
+	BailIfError(errCode = MacSocket_socket(&theSocket,false,theTimeout * 60,MyMacSocket_IdleWaitCallback,&randomizer));
+
+	
+	//	Set up the connect string and try to connect
+	
+	CopyCStrAndInsertCStrLongIntIntoCStr("%s:%ld",kHTTPS_DNS,kHTTPS_Port,tempString,sizeof(tempString));
+	
+	printf("Connecting to %s....\n",tempString);
+
+	BailIfError(errCode = MacSocket_connect(theSocket,tempString));
+	
+	
+	//	Init SSL stuff
+	
+	SSL_load_error_strings();
+	
+	SSLeay_add_ssl_algorithms();
+	
+	
+	//	Pick the SSL method
+	
+//	ssl_ctx = SSL_CTX_new(SSLv2_client_method());
+	ssl_ctx = SSL_CTX_new(SSLv23_client_method());
+//	ssl_ctx = SSL_CTX_new(SSLv3_client_method());
+			
+
+	//	Create an SSL thingey and try to negotiate the connection
+	
+	ssl = SSL_new(ssl_ctx);
+	
+	SSL_set_fd(ssl,theSocket);
+	
+	errCode = SSL_connect(ssl);
+	
+	if (errCode < 0)
+	{
+		SetErrorMessageAndLongIntAndBail("OpenSSL: Can't initiate SSL connection, SSL_connect() = ",errCode);
+	}
+	
+	//	Request the URI from the host
+	
+	CopyCStrToCStr("GET ",tempString,sizeof(tempString));
+	ConcatCStrToCStr(kHTTPS_URI,tempString,sizeof(tempString));
+	ConcatCStrToCStr(" HTTP/1.0\r\n\r\n",tempString,sizeof(tempString));
+
+	
+	errCode = SSL_write(ssl,tempString,CStrLength(tempString));
+	
+	if (errCode < 0)
+	{
+		SetErrorMessageAndLongIntAndBail("OpenSSL: Error writing data via ssl, SSL_write() = ",errCode);
+	}
+	
+
+	for (;;)
+	{
+	char	tempString[256];
+	int		bytesRead;
+		
+
+		//	Read some bytes and dump them to the console
+		
+		bytesRead = SSL_read(ssl,tempString,sizeof(tempString) - 1);
+		
+		if (bytesRead == 0 && MacSocket_RemoteEndIsClosing(theSocket))
+		{
+			break;
+		}
+		
+		else if (bytesRead < 0)
+		{
+			SetErrorMessageAndLongIntAndBail("OpenSSL: Error reading data via ssl, SSL_read() = ",bytesRead);
+		}
+		
+		
+		tempString[bytesRead] = '\0';
+		
+		printf("%s", tempString);
+	}
+	
+	printf("\n\n\n");
+	
+	//	All done!
+	
+	errCode = noErr;
+	
+	
+EXITPOINT:
+
+	//	Clean up and go home
+	
+	if (theSocket >= 0)
+	{
+		MacSocket_close(theSocket);
+	}
+	
+	if (ssl != nil)
+	{
+		SSL_free(ssl);
+	}
+	
+	if (ssl_ctx != nil)
+	{
+		SSL_CTX_free(ssl_ctx);
+	}
+	
+	
+	if (errCode != noErr)
+	{
+		printf("An error occurred:\n");
+		
+		printf("%s",GetErrorMessage());
+	}
+	
+	
+	MacSocket_Shutdown();
+}

MacOS/GetHTTPS.src/MacSocket.h

@@ -0,0 +1,103 @@
+#pragma once
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+
+enum
+{
+	kMacSocket_TimeoutErr = -2
+};
+
+
+//	Since MacSocket does busy waiting, I do a callback while waiting
+
+typedef OSErr (*MacSocket_IdleWaitCallback)(void *);
+
+
+//	Call this before anything else!
+
+OSErr MacSocket_Startup(void);
+
+
+//	Call this to cleanup before quitting
+
+OSErr MacSocket_Shutdown(void);
+
+
+//	Call this to allocate a "socket" (reference number is returned in outSocketNum)
+//	Note that inDoThreadSwitching is pretty much irrelevant right now, since I ignore it
+//	The inTimeoutTicks parameter is applied during reads/writes of data
+//	The inIdleWaitCallback parameter specifies a callback which is called during busy-waiting periods
+//	The inUserRefPtr parameter is passed back to the idle-wait callback
+
+OSErr MacSocket_socket(int *outSocketNum,const Boolean inDoThreadSwitching,const long inTimeoutTicks,MacSocket_IdleWaitCallback inIdleWaitCallback,void *inUserRefPtr);
+
+
+//	Call this to connect to an IP/DNS address
+//	Note that inTargetAddressAndPort is in "IP:port" format-- e.g. 10.1.1.1:123
+
+OSErr MacSocket_connect(const int inSocketNum,char *inTargetAddressAndPort);
+
+
+//	Call this to listen on a port
+//	Since this a low-performance implementation, I allow a maximum of 1 (one!) incoming request when I listen
+
+OSErr MacSocket_listen(const int inSocketNum,const int inPortNum);
+
+
+//	Call this to close a socket
+
+OSErr MacSocket_close(const int inSocketNum);
+
+
+//	Call this to receive data on a socket
+//	Most parameters' purpose are obvious-- except maybe "inBlock" which controls whether I wait for data or return immediately
+
+int MacSocket_recv(const int inSocketNum,void *outBuff,int outBuffLength,const Boolean inBlock);
+
+
+//	Call this to send data on a socket
+
+int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength);
+
+
+//	If zero bytes were read in a call to MacSocket_recv(), it may be that the remote end has done a half-close
+//	This function will let you check whether that's true or not
+
+Boolean MacSocket_RemoteEndIsClosing(const int inSocketNum);
+
+
+//	Call this to see if the listen has completed after a call to MacSocket_listen()
+
+Boolean MacSocket_ListenCompleted(const int inSocketNum);
+
+
+//	These really aren't very useful anymore
+
+Boolean MacSocket_LocalEndIsOpen(const int inSocketNum);
+Boolean MacSocket_RemoteEndIsOpen(const int inSocketNum);
+
+
+//	You may wish to change the userRefPtr for a socket callback-- use this to do it
+
+void MacSocket_SetUserRefPtr(const int inSocketNum,void *inNewRefPtr);
+
+
+//	Call these to get the socket's IP:port descriptor
+
+void MacSocket_GetLocalIPAndPort(const int inSocketNum,char *outIPAndPort,const int inIPAndPortLength);
+void MacSocket_GetRemoteIPAndPort(const int inSocketNum,char *outIPAndPort,const int inIPAndPortLength);
+
+
+//	Call this to get error info from a socket
+
+void MacSocket_GetSocketErrorInfo(const int inSocketNum,int *outSocketErrCode,char *outSocketErrString,const int inSocketErrStringMaxLength);
+
+
+#ifdef __cplusplus
+}
+#endif

MacOS/Randomizer.cpp

@@ -0,0 +1,476 @@
+/* 
+------- Strong random data generation on a Macintosh (pre - OS X) ------
+		
+--	GENERAL: We aim to generate unpredictable bits without explicit
+	user interaction. A general review of the problem may be found
+	in RFC 1750, "Randomness Recommendations for Security", and some
+	more discussion, of general and Mac-specific issues has appeared
+	in "Using and Creating Cryptographic- Quality Random Numbers" by
+	Jon Callas (www.merrymeet.com/jon/usingrandom.html).
+
+	The data and entropy estimates provided below are based on my
+	limited experimentation and estimates, rather than by any
+	rigorous study, and the entropy estimates tend to be optimistic.
+	They should not be considered absolute.
+
+	Some of the information being collected may be correlated in
+	subtle ways. That includes mouse positions, timings, and disk
+	size measurements. Some obvious correlations will be eliminated
+	by the programmer, but other, weaker ones may remain. The
+	reliability of the code depends on such correlations being
+	poorly understood, both by us and by potential interceptors.
+
+	This package has been planned to be used with OpenSSL, v. 0.9.5.
+	It requires the OpenSSL function RAND_add. 
+
+--	OTHER WORK: Some source code and other details have been
+	published elsewhere, but I haven't found any to be satisfactory
+	for the Mac per se:
+
+	* The Linux random number generator (by Theodore Ts'o, in
+	  drivers/char/random.c), is a carefully designed open-source
+	  crypto random number package. It collects data from a variety
+	  of sources, including mouse, keyboard and other interrupts.
+	  One nice feature is that it explicitly estimates the entropy
+	  of the data it collects. Some of its features (e.g. interrupt
+	  timing) cannot be reliably exported to the Mac without using
+	  undocumented APIs.
+
+	* Truerand by Don P. Mitchell and Matt Blaze uses variations
+	  between different timing mechanisms on the same system. This
+	  has not been tested on the Mac, but requires preemptive
+	  multitasking, and is hardware-dependent, and can't be relied
+	  on to work well if only one oscillator is present.
+
+	* Cryptlib's RNG for the Mac (RNDMAC.C by Peter Gutmann),
+	  gathers a lot of information about the machine and system
+	  environment. Unfortunately, much of it is constant from one
+	  startup to the next. In other words, the random seed could be
+	  the same from one day to the next. Some of the APIs are
+	  hardware-dependent, and not all are compatible with Carbon (OS
+	  X). Incidentally, the EGD library is based on the UNIX entropy
+	  gathering methods in cryptlib, and isn't suitable for MacOS
+	  either.
+
+	* Mozilla (and perhaps earlier versions of Netscape) uses the
+	  time of day (in seconds) and an uninitialized local variable
+	  to seed the random number generator. The time of day is known
+	  to an outside interceptor (to within the accuracy of the
+	  system clock). The uninitialized variable could easily be
+	  identical between subsequent launches of an application, if it
+	  is reached through the same path.
+
+	* OpenSSL provides the function RAND_screen(), by G. van
+	  Oosten, which hashes the contents of the screen to generate a
+	  seed. This is not useful for an extension or for an
+	  application which launches at startup time, since the screen
+	  is likely to look identical from one launch to the next. This
+	  method is also rather slow.
+
+	* Using variations in disk drive seek times has been proposed
+	  (Davis, Ihaka and Fenstermacher, world.std.com/~dtd/;
+	  Jakobsson, Shriver, Hillyer and Juels,
+	  www.bell-labs.com/user/shriver/random.html). These variations
+	  appear to be due to air turbulence inside the disk drive
+	  mechanism, and are very strongly unpredictable. Unfortunately
+	  this technique is slow, and some implementations of it may be
+	  patented (see Shriver's page above.) It of course cannot be
+	  used with a RAM disk.
+
+--	TIMING: On the 601 PowerPC the time base register is guaranteed
+	to change at least once every 10 addi instructions, i.e. 10
+	cycles. On a 60 MHz machine (slowest PowerPC) this translates to
+	a resolution of 1/6 usec. Newer machines seem to be using a 10
+	cycle resolution as well.
+	
+	For 68K Macs, the Microseconds() call may be used. See Develop
+	issue 29 on the Apple developer site
+	(developer.apple.com/dev/techsupport/develop/issue29/minow.html)
+	for information on its accuracy and resolution. The code below
+	has been tested only on PowerPC based machines.
+
+	The time from machine startup to the launch of an application in
+	the startup folder has a variance of about 1.6 msec on a new G4
+	machine with a defragmented and optimized disk, most extensions
+	off and no icons on the desktop. This can be reasonably taken as
+	a lower bound on the variance. Most of this variation is likely
+	due to disk seek time variability. The distribution of startup
+	times is probably not entirely even or uncorrelated. This needs
+	to be investigated, but I am guessing that it not a majpor
+	problem. Entropy = log2 (1600/0.166) ~= 13 bits on a 60 MHz
+	machine, ~16 bits for a 450 MHz machine.
+
+	User-launched application startup times will have a variance of
+	a second or more relative to machine startup time. Entropy >~22
+	bits.
+
+	Machine startup time is available with a 1-second resolution. It
+	is predictable to no better a minute or two, in the case of
+	people who show up punctually to work at the same time and
+	immediately start their computer. Using the scheduled startup
+	feature (when available) will cause the machine to start up at
+	the same time every day, making the value predictable. Entropy
+	>~7 bits, or 0 bits with scheduled startup.
+
+	The time of day is of course known to an outsider and thus has 0
+	entropy if the system clock is regularly calibrated.
+
+--	KEY TIMING: A  very fast typist (120 wpm) will have a typical
+	inter-key timing interval of 100 msec. We can assume a variance
+	of no less than 2 msec -- maybe. Do good typists have a constant
+	rhythm, like drummers? Since what we measure is not the
+	key-generated interrupt but the time at which the key event was
+	taken off the event queue, our resolution is roughly the time
+	between process switches, at best 1 tick (17 msec). I  therefore
+	consider this technique questionable and not very useful for
+	obtaining high entropy data on the Mac.
+
+--	MOUSE POSITION AND TIMING: The high bits of the mouse position
+	are far from arbitrary, since the mouse tends to stay in a few
+	limited areas of the screen. I am guessing that the position of
+	the mouse is arbitrary within a 6 pixel square. Since the mouse
+	stays still for long periods of time, it should be sampled only
+	after it was moved, to avoid correlated data. This gives an
+	entropy of log2(6*6) ~= 5 bits per measurement.
+
+	The time during which the mouse stays still can vary from zero
+	to, say, 5 seconds (occasionally longer). If the still time is
+	measured by sampling the mouse during null events, and null
+	events are received once per tick, its resolution is 1/60th of a
+	second, giving an entropy of log2 (60*5) ~= 8 bits per
+	measurement. Since the distribution of still times is uneven,
+	this estimate is on the high side.
+
+	For simplicity and compatibility across system versions, the
+	mouse is to be sampled explicitly (e.g. in the event loop),
+	rather than in a time manager task.
+
+--	STARTUP DISK TOTAL FILE SIZE: Varies typically by at least 20k
+	from one startup to the next, with 'minimal' computer use. Won't
+	vary at all if machine is started again immediately after
+	startup (unless virtual memory is on), but any application which
+	uses the web and caches information to disk is likely to cause
+	this much variation or more. The variation is probably not
+	random, but I don't know in what way. File sizes tend to be
+	divisible by 4 bytes since file format fields are often
+	long-aligned. Entropy > log2 (20000/4) ~= 12 bits.
+	
+--	STARTUP DISK FIRST AVAILABLE ALLOCATION BLOCK: As the volume
+	gets fragmented this could be anywhere in principle. In a
+	perfectly unfragmented volume this will be strongly correlated
+	with the total file size on the disk. With more fragmentation
+	comes less certainty. I took the variation in this value to be
+	1/8 of the total file size on the volume.
+
+--	SYSTEM REQUIREMENTS: The code here requires System 7.0 and above
+	(for Gestalt and Microseconds calls). All the calls used are
+	Carbon-compatible.
+*/
+
+/*------------------------------ Includes ----------------------------*/
+
+#include "Randomizer.h"
+
+// Mac OS API
+#include <Files.h>
+#include <Folders.h>
+#include <Events.h>
+#include <Processes.h>
+#include <Gestalt.h>
+#include <Resources.h>
+#include <LowMem.h>
+
+// Standard C library
+#include <stdlib.h>
+#include <math.h>
+
+/*---------------------- Function declarations -----------------------*/
+
+// declared in OpenSSL/crypto/rand/rand.h
+extern "C" void RAND_add (const void *buf, int num, double entropy);
+
+unsigned long GetPPCTimer (bool is601);	// Make it global if needed
+					// elsewhere
+
+/*---------------------------- Constants -----------------------------*/
+
+#define kMouseResolution 6		// Mouse position has to differ
+					// from the last one by this
+					// much to be entered
+#define kMousePositionEntropy 5.16	// log2 (kMouseResolution**2)
+#define kTypicalMouseIdleTicks 300.0	// I am guessing that a typical
+					// amount of time between mouse
+					// moves is 5 seconds
+#define kVolumeBytesEntropy 12.0	// about log2 (20000/4),
+					// assuming a variation of 20K
+					// in total file size and
+					// long-aligned file formats.
+#define kApplicationUpTimeEntropy 6.0	// Variance > 1 second, uptime
+					// in ticks  
+#define kSysStartupEntropy 7.0		// Entropy for machine startup
+					// time
+
+
+/*------------------------ Function definitions ----------------------*/
+
+CRandomizer::CRandomizer (void)
+{
+	long	result;
+	
+	mSupportsLargeVolumes =
+		(Gestalt(gestaltFSAttr, &result) == noErr) &&
+		((result & (1L << gestaltFSSupports2TBVols)) != 0);
+	
+	if (Gestalt (gestaltNativeCPUtype, &result) != noErr)
+	{
+		mIsPowerPC = false;
+		mIs601 = false;
+	}
+	else
+	{
+		mIs601 = (result == gestaltCPU601);
+		mIsPowerPC = (result >= gestaltCPU601);
+	}
+	mLastMouse.h = mLastMouse.v = -10;	// First mouse will
+						// always be recorded
+	mLastPeriodicTicks = TickCount();
+	GetTimeBaseResolution ();
+	
+	// Add initial entropy
+	AddTimeSinceMachineStartup ();
+	AddAbsoluteSystemStartupTime ();
+	AddStartupVolumeInfo ();
+	AddFiller ();
+}
+
+void CRandomizer::PeriodicAction (void)
+{
+	AddCurrentMouse ();
+	AddNow (0.0);	// Should have a better entropy estimate here
+	mLastPeriodicTicks = TickCount();
+}
+
+/*------------------------- Private Methods --------------------------*/
+
+void CRandomizer::AddCurrentMouse (void)
+{
+	Point mouseLoc;
+	unsigned long lastCheck;	// Ticks since mouse was last
+					// sampled
+
+#if TARGET_API_MAC_CARBON
+	GetGlobalMouse (&mouseLoc);
+#else
+	mouseLoc = LMGetMouseLocation();
+#endif
+	
+	if (labs (mLastMouse.h - mouseLoc.h) > kMouseResolution/2 &&
+	    labs (mLastMouse.v - mouseLoc.v) > kMouseResolution/2)
+		AddBytes (&mouseLoc, sizeof (mouseLoc),
+				kMousePositionEntropy);
+	
+	if (mLastMouse.h == mouseLoc.h && mLastMouse.v == mouseLoc.v)
+		mMouseStill ++;
+	else
+	{
+		double entropy;
+		
+		// Mouse has moved. Add the number of measurements for
+		// which it's been still. If the resolution is too
+		// coarse, assume the entropy is 0.
+
+		lastCheck = TickCount() - mLastPeriodicTicks;
+		if (lastCheck <= 0)
+			lastCheck = 1;
+		entropy = log2l
+			(kTypicalMouseIdleTicks/(double)lastCheck);
+		if (entropy < 0.0)
+			entropy = 0.0;
+		AddBytes (&mMouseStill, sizeof (mMouseStill), entropy);
+		mMouseStill = 0;
+	}
+	mLastMouse = mouseLoc;
+}
+
+void CRandomizer::AddAbsoluteSystemStartupTime (void)
+{
+	unsigned long	now;		// Time in seconds since
+					// 1/1/1904
+	GetDateTime (&now);
+	now -= TickCount() / 60;	// Time in ticks since machine
+					// startup
+	AddBytes (&now, sizeof (now), kSysStartupEntropy);
+}
+
+void CRandomizer::AddTimeSinceMachineStartup (void)
+{
+	AddNow (1.5);			// Uncertainty in app startup
+					// time is > 1.5 msec (for
+					// automated app startup).
+}
+
+void CRandomizer::AddAppRunningTime (void)
+{
+	ProcessSerialNumber PSN;
+	ProcessInfoRec		ProcessInfo;
+	
+	ProcessInfo.processInfoLength = sizeof (ProcessInfoRec);
+	ProcessInfo.processName = nil;
+	ProcessInfo.processAppSpec = nil;
+	
+	GetCurrentProcess (&PSN);
+	GetProcessInformation (&PSN, &ProcessInfo);
+
+	// Now add the amount of time in ticks that the current process
+	// has been active
+
+	AddBytes (&ProcessInfo, sizeof (ProcessInfoRec),
+			kApplicationUpTimeEntropy);
+}
+
+void CRandomizer::AddStartupVolumeInfo (void)
+{
+	short			vRefNum;
+	long			dirID;
+	XVolumeParam	pb;
+	OSErr			err;
+	
+	if (!mSupportsLargeVolumes)
+		return;
+		
+	FindFolder (kOnSystemDisk, kSystemFolderType, kDontCreateFolder,
+			&vRefNum, &dirID);
+	pb.ioVRefNum = vRefNum;
+	pb.ioCompletion = 0;
+	pb.ioNamePtr = 0;
+	pb.ioVolIndex = 0;
+	err = PBXGetVolInfoSync (&pb);
+	if (err != noErr)
+		return;
+		
+	// Base the entropy on the amount of space used on the disk and
+	// on the next available allocation block. A lot else might be
+	// unpredictable, so might as well toss the whole block in. See
+	// comments for entropy estimate justifications.
+
+	AddBytes (&pb, sizeof (pb),
+		kVolumeBytesEntropy +
+		log2l (((pb.ioVTotalBytes.hi - pb.ioVFreeBytes.hi)
+				* 4294967296.0D +
+			(pb.ioVTotalBytes.lo - pb.ioVFreeBytes.lo))
+				/ pb.ioVAlBlkSiz - 3.0));
+}
+
+/*
+	On a typical startup CRandomizer will come up with about 60
+	bits of good, unpredictable data. Assuming no more input will
+	be available, we'll need some more lower-quality data to give
+	OpenSSL the 128 bits of entropy it desires. AddFiller adds some
+	relatively predictable data into the soup.
+*/
+
+void CRandomizer::AddFiller (void)
+{
+	struct
+	{
+		ProcessSerialNumber psn;	// Front process serial
+						// number
+		RGBColor	hiliteRGBValue;	// User-selected
+						// highlight color
+		long		processCount;	// Number of active
+						// processes
+		long		cpuSpeed;	// Processor speed
+		long		totalMemory;	// Total logical memory
+						// (incl. virtual one)
+		long		systemVersion;	// OS version
+		short		resFile;	// Current resource file
+	} data;
+	
+	GetNextProcess ((ProcessSerialNumber*) kNoProcess);
+	while (GetNextProcess (&data.psn) == noErr)
+		data.processCount++;
+	GetFrontProcess (&data.psn);
+	LMGetHiliteRGB (&data.hiliteRGBValue);
+	Gestalt (gestaltProcClkSpeed, &data.cpuSpeed);
+	Gestalt (gestaltLogicalRAMSize, &data.totalMemory);
+	Gestalt (gestaltSystemVersion, &data.systemVersion);
+	data.resFile = CurResFile ();
+	
+	// Here we pretend to feed the PRNG completely random data. This
+	// is of course false, as much of the above data is predictable
+	// by an outsider. At this point we don't have any more
+	// randomness to add, but with OpenSSL we must have a 128 bit
+	// seed before we can start. We just add what we can, without a
+	// real entropy estimate, and hope for the best.
+
+	AddBytes (&data, sizeof(data), 8.0 * sizeof(data));
+	AddCurrentMouse ();
+	AddNow (1.0);
+}
+
+//-------------------  LOW LEVEL ---------------------
+
+void CRandomizer::AddBytes (void *data, long size, double entropy)
+{
+	RAND_add (data, size, entropy * 0.125);	// Convert entropy bits
+						// to bytes
+}
+
+void CRandomizer::AddNow (double millisecondUncertainty)
+{
+	long time = SysTimer();
+	AddBytes (&time, sizeof (time), log2l (millisecondUncertainty *
+			mTimebaseTicksPerMillisec));
+}
+
+//----------------- TIMING SUPPORT ------------------
+
+void CRandomizer::GetTimeBaseResolution (void)
+{	
+#ifdef __powerc
+	long speed;
+	
+	// gestaltProcClkSpeed available on System 7.5.2 and above
+	if (Gestalt (gestaltProcClkSpeed, &speed) != noErr)
+		// Only PowerPCs running pre-7.5.2 are 60-80 MHz
+		// machines.
+		mTimebaseTicksPerMillisec =  6000.0D;
+	// Assume 10 cycles per clock update, as in 601 spec. Seems true
+	// for later chips as well.
+	mTimebaseTicksPerMillisec = speed / 1.0e4D;
+#else
+	// 68K VIA-based machines (see Develop Magazine no. 29)
+	mTimebaseTicksPerMillisec = 783.360D;
+#endif
+}
+
+unsigned long CRandomizer::SysTimer (void)	// returns the lower 32
+						// bit of the chip timer
+{
+#ifdef __powerc
+	return GetPPCTimer (mIs601);
+#else
+	UnsignedWide usec;
+	Microseconds (&usec);
+	return usec.lo;
+#endif
+}
+
+#ifdef __powerc
+// The timebase is available through mfspr on 601, mftb on later chips.
+// Motorola recommends that an 601 implementation map mftb to mfspr
+// through an exception, but I haven't tested to see if MacOS actually
+// does this. We only sample the lower 32 bits of the timer (i.e. a
+// few minutes of resolution)
+
+asm unsigned long GetPPCTimer (register bool is601)
+{
+	cmplwi	is601, 0	// Check if 601
+	bne	_601		// if non-zero goto _601
+	mftb  	r3		// Available on 603 and later.
+	blr			// return with result in r3
+_601:
+	mfspr r3, spr5  	// Available on 601 only.
+				// blr inserted automatically
+}
+#endif

MacOS/Randomizer.h

@@ -0,0 +1,43 @@
+
+//	Gathers unpredictable system data to be used for generating
+//	random bits
+
+#include <MacTypes.h>
+
+class CRandomizer
+{
+public:
+	CRandomizer (void);
+	void PeriodicAction (void);
+	
+private:
+
+	// Private calls
+
+	void		AddTimeSinceMachineStartup (void);
+	void		AddAbsoluteSystemStartupTime (void);
+	void		AddAppRunningTime (void);
+	void		AddStartupVolumeInfo (void);
+	void		AddFiller (void);
+
+	void		AddCurrentMouse (void);
+	void		AddNow (double millisecondUncertainty);
+	void		AddBytes (void *data, long size, double entropy);
+	
+	void		GetTimeBaseResolution (void);
+	unsigned long	SysTimer (void);
+
+	// System Info	
+	bool		mSupportsLargeVolumes;
+	bool		mIsPowerPC;
+	bool		mIs601;
+	
+	// Time info
+	double		mTimebaseTicksPerMillisec;
+	unsigned long	mLastPeriodicTicks;
+	
+	// Mouse info
+	long		mSamplePeriod;
+	Point		mLastMouse;
+	long		mMouseStill;
+};

MacOS/TODO

@@ -0,0 +1,18 @@
+-------------------------------------------------------------------
+Verify server certificate
+-------------------------------------------------------------------
+Currently omitted from the project:
+
+	crypto/tmdiff.c
+	crypto/bio/bss_conn.c
+	crypto/bio/b_sock.c
+	crypto/bio/bss_acpt.c
+	crypto/bio/bss_log.h
+
+-------------------------------------------------------------------
+Build libraries to link with...
+-------------------------------------------------------------------
+Port openssl application.
+-------------------------------------------------------------------
+BN optimizations (currently PPC version is compiled with BN_LLONG)
+-------------------------------------------------------------------

MacOS/_MWERKS_GUSI_prefix.h

@@ -0,0 +1,9 @@
+#include <MacHeaders.h>
+#define B_ENDIAN
+#ifdef __POWERPC__
+#pragma longlong on
+#endif
+#if 1
+#define MAC_OS_GUSI_SOURCE
+#endif
+#define MONOLITH

MacOS/_MWERKS_prefix.h

@@ -0,0 +1,9 @@
+#include <MacHeaders.h>
+#define B_ENDIAN
+#ifdef __POWERPC__
+#pragma longlong on
+#endif
+#if 0
+#define MAC_OS_GUSI_SOURCE
+#endif
+#define MONOLITH

MacOS/buildinf.h

@@ -0,0 +1,5 @@
+#ifndef MK1MF_BUILD
+#  define CFLAGS	"-DB_ENDIAN"
+#  define PLATFORM	"macos"
+#  define DATE		"Sun Feb 27 19:44:16 MET 2000"
+#endif

MacOS/mklinks.as.hqx

@@ -0,0 +1,820 @@
+(This file must be converted with BinHex 4.0)
+
+:#QeVE'PZDh-ZBA-!39"36'&`E(3J!!!!!!!!!*LiI6m!!!!!!3!!!*G#!!#@3J!
+!!AChFQPd!!!!K3)"!3m(Fh9`F'pbG!!!!)B#!3%$"(0eFQ8!!!#(!J-%"!3("3C
+cGfPdBfJ!!!#)!J%"#39cH@jMD!!!!)N#"J%$!`-&"3-'FhPcG'9Y!!!!LJ)&"3)
+%!J8("!-#!`4dB@*X!!!!L`))!3-$!`-$!`-$"(4PE'`!!!#-!J)"#38$G'KP!!!
+!M3))(J)@!Ki#!J))!K)#!`)B!Kd%G'KPE3!!!)i#!J%&#`4dD'9j!!!!M`)#!J)
+#$3TdD(*[G@GSEh9d!!!!N!!#!3%&"(4TCQB!!!#4!J%"!`4dD@eP!!!!NJ)"!JS
+#!h4T!!!!'N!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!H!!!!!!!#!!!!!!
+!!!!!!!!!!!!!rrrrr`!!!$3!!!!N!!!!!#"[!!5JAb"[!!5K++!M6R9$9'mJFR9
+Z)(4SDA-JFf0bDA"d)'&`F'aTBf&dD@pZ,#"jEh8JEA9cG#"QDA*cG#"TER0dB@a
+X)%&`F'aP8f0bDA"d,J!!!)C8D'Pc)(0MFQP`G#"MFQ9KG'9c)#iZ,fPZBfaeC'8
+[Eh"PER0cE#"KEQ3JCQPXE(-JDA3JGfPdD#"ZC@0PFh0KFRNJB@aTBA0PFbi0$8P
+d)'eTCfKd)(4KDf8JB5"hD'PXC5"dEb"MEfe`E'9dC5"cEb"`E'9KFf8JBQ8JF'&
+dD@9ZG$SY+3!!!#S!!J!!!!!!$3!+!"!!!!!-!!!!!!!!!!!!63!0!!S!%!%!!!`
+!!!!!!!!!!!!B!!!!+!!!!!!!!!!)!!!!)!#N2c`!!DR`!!!!l!!!!!&19[ri,`0
+f!#m$-$bKVDG'*KmY52ri,`-`2+LITdBQ(b!ZrrLa`'FJ,`-J2'0`ER4"l[rm)NL
+KV5+)*Kp+3'B)5Ulrr'F#GJ%3!bBZrr41ANje6PB!!#m-@Bm[2%j29%Nr2!#!U"m
+SAb!-CJK`!cm!UFKJ+#m-UC)J9#!)d+J!'#&!!"JJ9#!)d+J!(#&!!"a9Mbm8)&q
+JAMk!9%mSE[rm6Pj1G8j@!!![$%kkre4+!'FU@Bm[2'&`E(3[2(0MF(4`)DJU+&m
+J$'F5@Bm[$#mm!!!!!A!!U#UTp&K26VVrG#KZrra1ANje!!!!('&`E(3!!!!"4P*
+&4J!!!!!!J%P$6L-!!!!!!*B!!!!"!!!!!!G"8&"-!!!!!!!"!!!"!!!!!S!!!!4
+!!!"i)!!!K"!!!3))!!)#"!!%"!)!#!J"!"!8!)!J)J"!3%%!)2#!J"#*!%!)KJ!
+J")3!)!*!!"!")!!3!K!!%!3)!"!)"!!J%!)!3#!"!)"!!S%!J!5#!3!)4!)!#%J
+%!!KB#!!%C"!!!m)J!!!"3!!!!)!!!!%!!!!$J!!!"m!!!(rJ!!$rm!!"rrJ!!rr
+m!!IrrJ!2rrm!(rrrJ$rrrm"rrrrJrrrrm2rrrrMrrrrmrrrrrRrrrrmrrrrq(rr
+rr!rrrrJ(rrr`!rrri!(rrm!$rrq!"rrr!!rrrJ!2rr`!$rri!!IRm!!$`q!!!!(
+!!!!!J!!!!!)!!!!!!!!!!!m!!!!!!!!!!!!!!!!!!!$`m!!!!!!!!!!!!!!!!!!
+2!!m!!!!!!!!!!!!!!!rrm!!!m!!!!!!!!!!!!!$`c0m!!!m!!!!!!!!!!!!2!!c
+-m!!!m!!!!!!!!!!!m!$-cI!!!!m!!!!!!!!!$`!-c0m!!!!!m!!!!!!!!2!!c-h
+`!!!!!!m!!!!!!!m!$-cIh`!!!!!!m!!!!!$`!-c0rGh`!!!!!!m!!!!2!!c-hph
+-h`!!!!!!m!!!rrr-cIhF`-h`!!!!!!m!!2lFr0rGc!`-h`!!!!!!m!$pc-rph-$
+!`-h`!!!!!!m!r-`2cF`-$!!-r3!!!!!!m!m!`-c!`-!!$0m!!!!!$-m!m!`-$!`
+!!-cI!!!!!-c`!!m!`-$!!!`-h`!!!!c2!!!!m!`-!!$!c0m!!!$-m!!!!!m!`!!
+-$-hm!!!-c`!!!!!!m!!!`-cIc!!!c2!!!!!!!!m!$!c0r-`!$-m!!!!!!!$pm-$
+-hmc!!-c`!!!!!!!2hI`-cIc-!!c2!!!!!!!!rGc2c0r-`!$-m!!!!!!!!2h-cmh
+mc!!-c`!!!!!!!!$mc!rIr-!!c2!!!!!!!!!!$m$2m!r-$-m!!!!!!!!!!!$rr`!
+!r-c`!!!!!!!!!!!!!!!!!!r2!!!!!!!!!!!!!!!!!!!!m!!!!!!!!!!!!!"!!B!
+13"%J)4"##18%Q)+3!%&!)5!L%%3BL#83*L!G3!#!!B!2`"rJ2r"rq2rmrrlrrhr
+r2riIr"ri2r!ri"h!!)!!!!#!!!!!$r!!!!!!!2r`$`!!!!!2$!m!m!!!!2$!c`!
+2!!!2$!c`!!$`!2r`cpm!!!m!rGrpc2!!!2$p$p`-c`!!$`m!`-$0m!$2!2!-$-h
+`$2!!$`$-hm$2!!!2m-hm$2!!!2h2hm$2!!!!r-rm$2!!!!!2r`r2!!!!!!!!!2!
+!!!!!!!#D8f0bDA"d)%&`F'aTBf&dD@pZ$3e8D'Pc)(0MFQP`G#"MFQ9KG'9c)#i
+Z,fPZBfaeC'8[Eh"PER0cE#"KEQ3JCQPXE(-JDA3JGfPdD#"ZC@0PFh0KFRNJB@a
+TBA0PFbi0$8Pd)'eTCfKd)(4KDf8JB5"hD'PXC5"dEb"MEfe`E'9dC5"cEb"`E'9
+KFf8JBQ8JF'&dD@9ZG$SY+3!!!")!!J!!!!!!!!!!!!%!"J!'%iN!!!!+@1!!!b!
+!!!-J!!!!!"3!+`!(!Cm#@!!V!!F"f!*B!!!!!3!!M`C'BA0N98&6)$%Z-6!a,M%
+`$J!!!!32rrm!!3!#!!-"rrm!!!d!!3!"D`!!!!!!!!!%!J!%!!)!"3!'$3!&!!*
+X!!)!!!U`!!IrrJd!"`!#6`!!!!!+X!!)!!N0!!J!!@X!!!!%#Um!#J)!#J!#!!X
+!$!d!#`!#E!!#!!3!"2rprr`"rrd!!!(rr!!!!J!-!!)!$3!1$3!0!!*X!!%!"!!
+%rrX!$`(rq`!!$!!2!&N!8b"(CA3JF'&dD#"dEb"dD'Pc)%&`F'aP8f0bDA"d)'&
+`F'aPG$XJGA0P)'Pd)(4[)'C[FQdJG'KP)("KG'JJG'mJG'KP)'PZBfaeC'8JCQp
+XC'9b!!)!!!)!$J!#!"!!%3d!%!!#E!!"!!3!"2rk!")"rrS!!!`!%J!Q!#!JB@j
+N)(4SC5"[G'KPFL"bC@aPGQ&ZG#"QEfaNCA*c,J!#!!!#!"%!!J!6!"30!"-!!R-
+!!!!%!"%!&3!@$3!9!!*M!!!!"!!1!"F!'!d!&`!#E!!&!!3!$!!CrrN0!"N!!Qi
+!!!!%!!`!'J!E$3!D!!)d!!!!"3!-rrJ!(!Vrq!!%#Q0[BQS0!"`!!Q`!"3!'!!X
+!(Irh$3!G!!0*!!)!"J!,rrB!([re#[rf!"JZC@&bFfCQC(*KE'Pc!!!!!!!!)!"
+KCQ4b$3!H!!"Q!!!!"J!(![re!!!"rrF!!!d!'`!"E3!!!!3!"3!I$`!I!6J)ER9
+XE!!!!!!!!Gq!rrm!!!!A"NCTEQ4PFJ!!(`*[Me!!ASfm!Qq,i!"HA[!!I&M!!!!
+!!!!!'mi!!JN#!Qq-1!!!Kb%#Ei`J!!!!!%C14&*038e"3e-!!"%!B@aTF`!!!!!
+!fJ!#!!!-6@&MD@jdEh0S)%K%!!!!!!!!!!!!!!!!!!!!XSA5h%*%!!!!!!!A"NC
+TEQ4PFJ!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!!!!!!!!!!!!!!!!!!!!!3rLc#@a!4Nj%8Ne"3e2rrrrr!!!!!!!!!!!!!!!!!!!
+!!!!!!!e6HA0dC@dJ4QpXC'9b!!!"!!3!!!!A!!)!)8eKBfPZG'pcD#")4$T6HA0
+dC@dJ4QpXC'9b1NCTEQ4PFJ$rr`!!!Irj!!!0!"J!!@d!!!!-!!hrp!Vrp!!%#Q0
+dH(30!"B!!@m!!!!!!!$rm`[rm`!5-!!(G'KPF'&dD!!(G'KP8'&dD!)!&!!#!#!
+!)3d!)!!#E!!#!")!%[rbrr%"rr)!!!(rm3!!!J!K!!)!)J!M$3!L!!*b!!!!%J!
+A!#3!*3d!*!!#EJ!$!")!&3!Q!#F0!#B!!6%!!!!6!"Arm!Vrm!!%#R4iC'`0!#F
+!!6%!!!!5!"2rl`Vrl`!%#Q&cBh)0!#8!!@m!!!!!!!$rlJ[rlJ!F-!!-G'KPEfa
+NC'9XD@ec!!adD'92E'4%C@aTEA-#!#-!!J!S!#N0!#J!!R)!!!!B!"d!+J!V$3!
+U!!&Y!!!!'!!C!#`-!#`!"`!"1J!#!!!0!#X!!Qi!!`!!!!!!,3!Z$3!Y!!%a!!!
+!'J!Frqd+rqd!"!TdH'4X$3!Z!!%a!!!!'3!Drq`+rq`!"!TKFf0b!J!T!!)!,`!
+`$3![!!*X!!)!(J!Hrq[rkJ(rk`!!!IrU!!!#!$!!!J!a!$)0!$%!!R)!!!!H!#X
+!-`!d$3!c!!*X!!8!(J!T!$Ark3d!03!#EJ!!!"i!+3!f!$F0!$B!!cF"!!!I!#R
+rk!!i!$N+rqJ!"!TMDA4Y$3!i!!&Y!!!!)`!PrqF$rqF!!3d!13!"E3!!!#B!+2r
+Q!rrQrrd0!$F!!@m!!!!H!"rrj3[rj3!5-!!(G'KPF'&dD!!(G'KP8'&dD!(rk3!
+!$3!d!!&[!!!!!!!!rq3,rq3!)$!!$R4SCA"bEfTPBh4`BA4S!!jdD'93FQpUC@0
+d8'&dD!)!-J!#!$S!1`d!1J!#FJ!!!#`!1`!m!$d0!$`!!Q-!!!!X!$N!2J!r$3!
+q!!*X!!8!,!!h!%$ri`d!3!!#EJ!!!#`!0`""!%)0!%%!!cF"!!!Y!$IriJ"$!%3
++rq)!"!TMDA4Y$3"$!!&Y!!!!-3!crq%$rq%!!3d!4!!"E3!!!$3!0[rJ!rrJrri
+0!%)!!@m!!!!X!#hrh`[rh`!5-!!(G'KPF'&dD!!(G'KP8'&dD!(ri`!!$3!r!!&
+Y!!!!0`!irpi+rpi!"!T849K8$3!p!!&[!!!!!!!!rpd,rpd!&M!!#A4SC@ePF'&
+dD!!*G'KP6@93BA4S!J!l!!)!43"'$3"&!!*X!!)!2!!mrpcrf`(rh!!!!IrE!!!
+#!%B!!J"(!%J0!%F!!R)!!!!m!%8!53"+$3"*!!*M!!!!2!""!%X!6!d!5`!#BJ!
+!!$`!2`"0!%i0!%d!!@m!!!!m!$hrfJ[rfJ!J-!!1G'KPF(*[DQ9MG("KG'J!$R4
+SC9"bEfTPBh43BA4S$3"1!!&Y!!!!23!q!%m-!%m!$3!(D@jME(9NC3!#!!!0!%`
+!!@d!!!!r!%$rf3Vrf3!%#P4&@&30!%S!!@m!!!!!!!$rf![rf!!Q-!!4D@jME(9
+NC@C[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S!J")!!)!8!"4$3"3!!*b!!!
+!4J"9!&)!8`d!8J!#B`!!!%B!83"8!&80!&3!!Q)!!!"'!%m!9J"A$3"@!!*L!!!
+!4J",!&J!@3d!@!!"E`!!!%B!4rrA#rrA!#!`!!jdD'9`FQpUC@0dF'&dD!!1G'K
+P8(*[DQ9MG&"KG'J0!&N!!@d!!!"(!%S!@J`!@J!0!!GTEQ0XG@4P!!)!!!d!9`!
+"E3!!!%X!6J"E$!"E!!d!"fp`C@jcFf`!!J!!$3"9!!&Y!!!!6`"3rpB+rpB!"!T
+849K8$3"6!!&[!!!!!!!!rp8,rp8!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&
+dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S!J"4!!)!A!"G$3"F!!*b!!!!9J"
+K!&i!A`d!AJ!#B`!!!&B!A3"J!'%0!'!!!Q)!!!"@!&X!BJ"M$3"L!!&[!!!!9J"
+Arp3,rp3!)$!!$R4SCA"bEfTPBh4`BA4S!!jdD'93FQpUC@0d8'&dD!d!B`!"E3!
+!!&F!@J"N$!"N!!`!"Q0bHA"dE`!#!!!0!'%!!@d!!!"E!&crd`Vrd`!%#P4&@&3
+0!&m!!@m!!!!!!!$rdJ[rdJ!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4Qp
+XC'9b8'&dD!)!A3!#!'8!CJd!C3!#FJ!!!')!E3"R!'J0!'F!!Q-!!!"L!'N!D3"
+U$3"T!!*L!!!!BJ"R!'X!E!d!D`!"E`!!!')!Brr4#rr4!#!`!!jdD'9`FQpUC@0
+dF'&dD!!1G'KP8(*[DQ9MG&"KG'J0!'`!!@d!!!"M!'B!E3`!E3!*!!0cFf`!!J!
+!$3"U!!&Y!!!!C`"Srp!+rp!!"!T849K8$3"S!!&[!!!!!!!!rmm,rmm!(M!!$A0
+cE'C[E'4PFR"KG'J!$A0cE%C[E'4PFP"KG'J#!'B!!J"Z!'m0!'i!!R)!!!"Z!(8
+!F!"a$3"`!!*M!!!!EJ"a!()!F`d!FJ!"E`!!!'i!Err1#rr1!#!`!!jdD'9`FQp
+UC@0dF'&dD!!1G'KP8(*[DQ9MG&"KG'J0!(-!!@d!!!"[!($rc3Vrc3!%#P4&@&3
+0!(%!!@m!!!!!!!$rc![rc!!Q-!!4Eh"PER0cE'C[E'4PFR"KG'J!%@p`C@jcFfa
+'EfaNCA*3BA4S!J"[!!)!G!"e$3"d!!*X!!)!GJ"frm[rbJ(rb`!!!Ir+!!!#!(8
+!!J"f!(F0!(B!!R)!!!"f!(X!H!"j$3"i!!&[!!!!GJ"hrmN,rmN!($!!$(4SC@p
+XC'4PE'PYF`!-G'KP6faN4'9XD@ec$3"j!!*Z!!-!!!!!!(S!H`d!HJ!"-3!!!(J
+!H[r)#[r)!!3+G(KNE!d!H`!"-3!!!(F!H2r(#[r(!!3+BA0MFJ)!G`!#!(`!I3d
+!I!!#E!!#!(`!I2r'rm8"rmB!!!(ra3!!!J"p!!)!IJ"r$3"q!!*X!!%!I!"mrm3
+!J!(ra!!!$!#!!%!!1L"NC@aPG'8JEfaN)'PZBfaeC'8kEh"PER0cE#"QEfaNCA)
+JB@jN)(*PBh*PBA4P)'Pd)'0XC@&ZE(N!!J!!!J"r!!)!J3##$3#"!!*X!!)!I!"
+mrm2r`J(r``!!!Ir#!!!#!))!!J#$!)30!)-!!e%!!!"m!+8!K3#'!)F0!)8!!@X
+!!!"r!*`!L!)!L!!#!)N!LJd!L3!$53!#!(m!N[r"!)[r`!Vr`3!B,QeTFf0cE'0
+d+LSU+J!!!!!!!*!!!#SU+LS0!)X!!Qi!!!"r!)i!M!#0$3#-!!)d!!!!K`#1rlm
+!MJVr[`!%#Q0QEf`0!)i!!@d!!!#+!)d!M``!M`!0!!G[F'9ZFh0X!!)!!!d!M3!
+#0!!!!(m!Krqq!*!!#[qq!!3+BfC[E!d!N!!!!@m!!!#$!)Er[3[r[3!Q-!!4D@j
+ME(9NC@C[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S![r!!!!#!)S!!J#4rl`
+0!*%!!dN!!J#6!*crZ`#5rlS+rlX!'#jMEh*PC'9XEbSU+LS!!!!!!!#3!!!U+LS
+U$3#5!!%a!!!!N`#BrlN+rlN!"!TcC@aP![qk!!!#rl`!!!d!KJ!$8J!!!!!!!2q
+irlIrYJVrZ!!B,Q&cBh*PFR)J+LSU+J!!!!!!!*!!!#SU+LS"rlF!!!,rYJ!!$3#
+(!!*X!!%!T!#Nrl8!N`(rY3!!$!#6!"-!$5"TCfj[FQ8JCA*bEh)!!J!!!J#%!!)
+!P!#9$3#8!!*X!!)!TJ#Qrl6rX`(rY!!!!Iqc!!!#!*8!!J#@!*F0!*B!!dN!!J#
+Q!,lrX[qa!*J+rl)!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Iqa!!!'!*J
+!!rq`!*N!QJVrX!!%#QY[Bf`0!*N!!@d!!!#U!+hrV`VrV`!%#Q0QEf`'!*S!!rq
+Z!*[rV3VrVJ!%#QPZFfJ0!*X!!M3!!!#`!,MrV!#F#[qX!!3+BfC[E!d!R!!"E`!
+!!,3!YrqV#rqV!#B`!"&TEQ0XG@4PCQpXC'9bF'&dD!!4D@jME(9NC8C[E'4PFP"
+KG'J'rkd!!!)!P`!#!*d!RJd!R3!#FJ!!!,m!aJ#I!+!0!*m!!Q`"!!#r!-)!SIq
+U$3#K!!%a!!!![`$#rkN+rkN!"!TbFfad!IqU!!!0!+!!!@m!!!!!!!$rU![rU!!
+Z-!!9G'KPEQ9hCQpXC'9bFQ9QCA*PEQ0P!"9dD'91CAG'EfaNCA*5C@CPFQ9ZBf8
+#!*i!!J#L!+-0!+)!!dN!!J$(!-lrT`#NrkB+rkF!'#jYDA0MFfaMG#SU+LS!!!!
+!!!#3!!!U+LSU$3#N!!&[!!!!a`$+rk8,rk8!,M!!&A4SC@jPGfC[E'4PFR*PCQ9
+bC@jMC3!9G'KP6Q9h4QpXC'9b8Q9QCA*PEQ0P![qQ!!!#!+-!!J#P!+B0!+8!!R)
+!!!$2!0`!T`#S$3#R!!&Y!!!!c`$5!+N-!+N!$3!(Eh"PER0cE!!#!!!0!+J!!Qi
+!!!!!!!!!UJ#V$3#U!!%a!!!!e`$Erk3+rk3!"!T`EQ&Y$3#V!!%a!!!!dJ$Ark-
++rk-!"!TcC@aP!J#Q!!)!V!#Y$3#X!!*X!!)!h3$Grk,rS3(rSJ!!!IqK!!!#!+d
+!!J#Z!+m0!+i!!Q`!!3$G!0hrS!#`!IqJ!!!-!,!!(`!C)&0dBA*d)'eKDfPZCb"
+dD'8JB@aTBA0PF`!#!!!#!+m!!J#a!,)0!,%!!dN!!J$G!3ArRrqH!,-+rjm!'#j
+MEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!IqH!!!'!,-!!rqG!,3!Y3VrR3!%#QY
+[Bf`0!,3!!@d!!!$K!16rR!VrR!!%#Q&XD@%'!,8!!rqE!,B!Y`VrQ`!%#QPZFfJ
+0!,B!!M3!!!$R!1rrQJ#i#[qD!!3+BfC[E!d!Z!!"E`!!!1X!l[qC#rqC!$3`!"K
+[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&
+dD!B!Y`!$rjJ!ZIqA#[qB!!3+G'mJ)!d!Z3!#EJ!!!2)!r`#k!,X0!,S!!M3!!!$
+i!2rrPJ#m#[q@!!3+CQPXC3d![!!"E3!!!2X!rJ#p$!#p!"-!$@p`C@jcFfaMEfj
+Q,QJ!!J!!$3#l!!)d!!!!mJ$irj8![JVrP3!%#Q0QEf`0!,i!!@m!!!$f!2IrP![
+rP!!@-!!*G'KPE@9`BA4S!!PdD'90C9"KG'J'rjF!!!)!XJ!#!,m!`!d![`!#E!!
+#!3B""[q6rj)"rj-!!!(rNJ!!!J$!!!)!`3$#$3$"!!*b!!!""J%4!--!a!d!``!
+#BJ!!!3B"$3$&!-B0!-8!!@m!!!%'!3RrN3[rN3!N-!!3Bh*jF(4[CQpXC'9bF'&
+dD!!3Bh*jF(4[4QpXC'9b8'&dD!d!aJ!"E3!!!3N"$!$($!$(!!X!"6TKFfia!!)
+!!!d!a!!"E`!!!!!!!2q3!![rN!!!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)!`J!
+#!-J!b3d!b!!$53!#!4)"22q2rii!bJVrM`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!
+!!'jeE'`"rii!!!B!bJ!$rid!b`$-#[q0!!3+DfpME!d!b`!"E3!!!4B"'Iq-#[q
+-!!3+B@aTB3B!c!!$riX!c3$1#[q,!!3+D@jcD!d!c3!#0!!!!4`"*2q+!-m+riS
+!"!TMCQpX$3$2!!&[!!!")!%MriN,riN!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9
+bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J$1!!2rL!$3riF+riJ!"!T
+dEb!J$3$3!!*Z!!!"*`%f!0%!dJd!d3!#0!!!!5m"0[q'!0-+riB!"!TQD@aP$3$
+6!!&Y!!!"-J%e!03-!03!$!!'BA0Z-5jS!!)!!!d!dJ!#0!!!!5F",rq&!08+ri8
+!"!TMCQpX$3$9!!&[!!!"+`%Zri3,ri3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!E
+rK`!!!J$*!!)!eJ$A$3$@!!0*!!)"23&Rri2rJJ$B#[q$!"JZBfpbC@0bC@`U+LS
+U!!!!!!!!N!!!ER9XE!(rJJ!!"J$B!!2rJ3$C!0S+ri%!"!TVEf0X$3$C!!&Y!!!
+"33&%ri!+ri!!"!TKE'PK"J$D!!2rI`$E!0`+rhm!"!TTER0S$3$E!!)d!!!"4`&
+2rhi!h3VrIJ!%#Q0QEf`0!0d!!@m!!!&,!8lrI3[rI3!d-!!BEh"PER0cE'PZBfa
+eC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!0`!!rpm!0l
+rH`VrI!!%#R4[)#!0!0i!!Qi!!!&5!@%!h`$J$3$I!!)d!!!"@J&KrhS!i3VrHJ!
+%#QCTE'80!1%!!@d!!!&G!@!!iJ`!iJ!3!!TKFfiaAfeKBbjS!!)!!!d!i!!#0!!
+!!9)"@[pj!1-+rhN!"!TMCQpX$3$M!!&[!!!"9J&CrhJ,rhJ!&$!!#(4PEA"`BA4
+S!!KdC@e`8'&dD!ErH`!!!J$A!!)!j!$P$3$N!!*X!!)"D!&SrhIrGJ(rG`!!!Ip
+f!!!#!18!!J$Q!1F0!1B!!R)!!!&S!A-!k!$T$3$S!!*L!!!"D!&[!1S!k`d!kJ!
+"E`!!!@J"Drpe#rpe!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*
+3BA4S$3$V!!&Y!!!"D`&Z!1`-!1`!#J!%1Q*TE`!#!!!0!1N!!@m!!!!!!!$rG![
+rG!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J$R!!)!l3$Z$3$Y!!0*!!)"G!'Hrh2
+rFJ$[#[pc!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(rFJ!!"J$[!!2rF3$
+`!2%+rh%!"!TVEf0X$3$`!!&Y!!!"H!&lrh!+rh!!"!TKE'PK"J$a!!2rE`$b!2-
++rfm!"!TTER0S$3$b!!)d!!!"IJ''rfi!p!VrEJ!%#Q0QEf`0!23!!@m!!!'#!BA
+rE3[rE3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'!2-!!rpX!2ArD`VrE!!%#R4[)#!0!28!!Qi!!!'*!CJ!pJ$
+h$3$f!!)d!!!"N3'BrfS!q!VrDJ!%#QCTE'80!2J!!@d!!!'8!CF!q3`!q3!,!!9
+LD@mZD!!#!!!0!2F!!M3!!!'*!C(rD3$k#[pT!!3+BfC[E!d!qJ!"E`!!!Bd"N!$
+rD![rD!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[pV!!!#!1i!!J$l!2`0!2X!!Q`
+!!J'I!CrrCrpQ!IpR!!!"rfB!!!)!r!!#!2d!rJd!r3!#FJ!!!Cm"UJ$r!3!0!2m
+!!Q)!!!'I!DB"!3%#$3%"!!&[!!!"R`'Lrf8,rf8!*$!!%'0bHA"dEfC[E'4PFR"
+KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!3)!!@d!!!'L!D8"!``"!`!*!!-kBQB!!J!
+!$3%!!!&[!!!!!!!!rf3,rf3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)!rJ!#!33
+""3d""!!$53!#!DX"eIpMrf)""JVrB`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'j
+eE'`"rf)!!!B""J!$rf%""`%)#[pK!!3+DfpME!d""`!"E3!!!Dm"X[pJ#[pJ!!3
++B@aTB3B"#!!$rem"#3%+#[pI!!3+D@jcD!d"#3!#0!!!!E8"[IpH!3X+rei!"!T
+MCQpX$3%,!!&[!!!"Z3'mred,red!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&
+dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J%+!!2rA!%-reX+re`!"!TdEb!
+J$3%-!!*Z!!!"`!(2!3d"$Jd"$3!#0!!!!FJ"crpD!3m+reS!"!TQD@aP$3%2!!&
+Y!!!"b`(1!4!-!4!!%!!+BQa[GfCTFfJZD!!#!!!0!3i!!M3!!!(!!FMr@3%4#[p
+C!!3+BfC[E!d"%3!"E`!!!F3"arpB#rpB!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J
+'reX!!!)""3!#!4)"%`d"%J!#E!!#!GB"e[pAreB"reF!!!(r9J!!!J%6!!)"&!%
+9$3%8!!*b!!!"eJ(K!4B"&`d"&J!#BJ!!!GB"h3%B!4N0!4J!!@m!!!(@!GRr93[
+r93!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"'3!"E3!
+!!GN"h!%D$!%D!!N!!cTLEJ!#!!!0!4F!!@m!!!!!!!$r9![r9!!8-!!)G'9YF("
+KG'J!#(4PEA"3BA4S!J%9!!)"'`%F$3%E!!0*!!)"iJ)-re2r8J%G#[p6!"JZBfp
+bC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(r8J!!"J%G!!2r83%H!4m+re%!"!TVEf0
+X$3%H!!&Y!!!"jJ(Tre!+re!!"!TKE'PK"J%I!!2r6`%J!5%+rdm!"!TTER0S$3%
+J!!)d!!!"l!(drdi")JVr6J!%#Q0QEf`0!5)!!@m!!!(`!I2r63[r63!d-!!BEh"
+PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J
+'!5%!!rp-!52r5`Vr6!!%#R4[)#!0!5-!!Qi!!!(h!JB"*!%P$3%N!!)d!!!"r`)
+'rdS"*JVr5J!%#QCTE'80!5B!!@d!!!)#!J8"*``"*`!+!!4LELjS!!)!!!d"*3!
+#0!!!!IF"rrp*!5J+rdN!"!TMCQpX$3%S!!&[!!!"q`(qrdJ,rdJ!&$!!#(4PEA"
+`BA4S!!KdC@e`8'&dD!Er5`!!!J%F!!)"+3%U$3%T!!*X!!)#$3)0rdIr4J(r4`!
+!!Ip'!!!#!5S!!J%V!5`0!5X!!R)!!!)0!KJ",3%Z$3%Y!!*L!!!#$3)8!5m"-!d
+",`!"E`!!!Jd#%2p&#rp&!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'Efa
+NCA*3BA4S$3%`!!&Y!!!#%!)6!6%-!6%!$3!(1Q*eCQCPFJ!#!!!0!5i!!@m!!!!
+!!!$r4![r4!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J%X!!)"-J%c$3%b!!0*!!)
+#'3*$rd2r3J%d#[p$!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(r3J!!"J%
+d!!2r33%e!6B+rd%!"!TVEf0X$3%e!!&Y!!!#(3)Jrd!+rd!!"!TKE'PK"J%f!!2
+r2`%h!6J+rcm!"!TTER0S$3%h!!)d!!!#)`)Vrci"13Vr2J!%#Q0QEf`0!6N!!@m
+!!!)R!LVr23[r23!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0
+-5@jME(9NC8C[E'4PFP"KG'J'!6J!!rmm!6Vr1`Vr2!!%#R4[)#!0!6S!!Qi!!!)
+Z!Md"1`%m$3%l!!)d!!!#0J)prcS"23Vr1J!%#QCTE'80!6d!!@d!!!)j!M`"2J`
+"2J!1!!KLG@CQCA)ZD!!#!!!0!6`!!M3!!!)Z!MEr13%r#[mj!!3+BfC[E!d"2`!
+"E`!!!M)#0Imi#rmi!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rcX!!!)"-`!#!8!
+"33d"3!!#E!!#!N3#42mhrcB"rcF!!!(r0J!!!J&"!!)"3J&$$3&#!!*b!!!#4!*
+2!83"43d"4!!#BJ!!!N3#5`&'!8F0!8B!!@m!!!*%!NIr03[r03!N-!!3Bh*jF(4
+[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"4`!"E3!!!NF#5J&)$!&)!!X
+!"6TMBA0d!!)!!!d"43!"E`!!!!!!!2md#rmd!"3`!!KdC@e`F'&dD!!)G'9YF&"
+KG'J#!8-!!J&*!8S0!8N!!dN!!J*3!RVr-rmb!8X+rc-!'#jMEh*PBh*PE#SU+LS
+!!!!!!!#3!!"ZG@aX!Imb!!!'!8X!!rma!8`"63Vr-3!%#QY[Bf`0!8`!!@d!!!*
+8!PIr-!Vr-!!%#Q&XD@%'!8d!!rm[!8i"6`Vr,`!%#QPZFfJ0!8i!!M3!!!*D!Q,
+r,J&3#[mZ!!3+BfC[E!d"8!!"E`!!!Pi#BImY#rmY!$3`!"K[F'9ZFh0XD@jME(9
+NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B"6`!$rb`"8Im
+V#[mX!!3+G'mJ)!d"83!#EJ!!!Q8#G!&5!9-0!9)!!M3!!!*Y!R6r+J&8#[mU!!3
++CQPXC3d"9!!"E3!!!R!#F`&9$!&9!!`!"Q0KFh3ZD!!#!!!0!9-!!M3!!!*P!Qh
+r+3&@#[mT!!3+BfC[E!d"9J!"E`!!!QN#E2mS#rmS!"3`!!KdC@e`F'&dD!!)G'9
+YF&"KG'J'rbX!!!)"5J!#!9F"@!d"9`!#E!!#!RX#HrmRrbB"rbF!!!(r*J!!!J&
+B!!)"@3&D$3&C!!*b!!!#H`+'!9X"A!d"@`!#BJ!!!RX#JJ&G!9i0!9d!!@m!!!*
+l!Rlr*3[r*3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d
+"AJ!"E3!!!Ri#J3&I$!&I!!X!"6TMEfe`!!)!!!d"A!!"E`!!!!!!!2mN#rmN!"3
+`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!9S!!J&J!@%0!@!!!dN!!J+(!V(r)rmL!@)
++rb-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!ImL!!!'!@)!!rmK!@-"C!V
+r)3!%#QY[Bf`0!@-!!@d!!!+,!Slr)!Vr)!!%#Q&XD@%'!@3!!rmI!@8"CJVr(`!
+%#QPZFfJ0!@8!!M3!!!+4!TRr(J&R#[mH!!3+BfC[E!d"C`!"E`!!!T8#Q2mG#rm
+G!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4Qp
+XC'9b8'&dD!B"CJ!$ra`"D2mE#[mF!!3+G'mJ)!d"D!!#EJ!!!T`#U`&T!@S0!@N
+!!M3!!!+N!U[r'J&V#[mD!!3+CQPXC3d"D`!"E3!!!UF#UJ&X$!&X!!`!"Q0[EA!
+ZD!!#!!!0!@S!!M3!!!+F!U6r'3&Y#[mC!!3+BfC[E!d"E3!"E`!!!U!#SrmB#rm
+B!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'raX!!!)"B3!#!@i"E`d"EJ!#E!!#!V)
+#X[mAraB"raF!!!(r&J!!!J&[!!)"F!&a$3&`!!*b!!!#XJ+p!A)"F`d"FJ!#BJ!
+!!V)#Z3&d!A80!A3!!@m!!!+b!VAr&3[r&3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!
+3Bh*jF(4[4QpXC'9b8'&dD!d"G3!"E3!!!V8#Z!&f$!&f!!X!"6TMEfjQ!!)!!!d
+"F`!"E`!!!!!!!2m8#rm8!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!A%!!J&h!AJ
+0!AF!!dN!!J+q!ZMr%rm5!AN+ra-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@a
+X!Im5!!!'!AN!!rm4!AS"H`Vr%3!%#QY[Bf`0!AS!!@d!!!,#!XAr%!Vr%!!%#Q&
+XD@%'!AX!!rm2!A`"I3Vr$`!%#QPZFfJ0!A`!!M3!!!,)!Y$r$J&q#[m1!!3+BfC
+[E!d"IJ!"E`!!!X`#crm0#rm0!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J
+!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B"I3!$r``"Irm,#[m-!!3+G'mJ)!d
+"I`!#EJ!!!Y-#iJ'!!B%0!B!!!M3!!!,E!Z,r#J'##[m+!!3+CQPXC3d"JJ!"E3!
+!!Yi#i3'$$!'$!!`!"Q0[EQBZD!!#!!!0!B%!!M3!!!,6!Y[r#3'%#[m*!!3+BfC
+[E!d"K!!"E`!!!YF#f[m)#rm)!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'r`X!!!)
+"H!!#!B8"KJd"K3!#E!!#!ZN#kIm(r`B"r`F!!!(r"J!!!J''!!)"K`')$3'(!!*
+b!!!#k3,d!BN"LJd"L3!#BJ!!!ZN#m!',!B`0!BX!!@m!!!,T!Zcr"3[r"3!N-!!
+3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"M!!"E3!!!Z`#l`'
+0$!'0!!S!"$TNCA-!!J!!$3'+!!&[!!!!!!!!r`3,r`3!&$!!#(4PEA"`BA4S!!K
+dC@e`8'&dD!)"L!!#!Bi"M`d"MJ!$53!#![8$(rm$r`)"N!!+r`-!'#jMEh*PBh*
+PE#SU+LS!!!!!!!#3!!"ZG@aX!Im#!!!'!C!!!!2r!3'4!C)+r`%!"!TVEf0X$3'
+4!!&Y!!!#q3,mr`!+r`!!"!TKE'PK"J'5!!2qr`'6!C3+r[m!"!TTER0S$3'6!!)
+d!!!#r`-(r[i"P3VqrJ!%#Q0QEf`0!C8!!@m!!!-$!`Eqr3[qr3!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!C3
+!!rlm!CEqq`Vqr!!%#R4[)#!0!CB!!Qi!!!-+!aN"P`'B$3'A!!)d!!!$%J-Cr[S
+"Q3VqqJ!%#QCTE'80!CN!!@d!!!-9!aJ"QJ`"QJ!,!!9NCA-ZD!!#!!!0!CJ!!M3
+!!!-+!a,qq3'E#[lj!!3+BfC[E!d"Q`!"E`!!!`i$%Ili#rli!"3`!!KdC@e`F'&
+dD!!)G'9YF&"KG'J'r[X!!!)"M`!#!C`"R3d"R!!#E!!#!b!$)2lhr[B"r[F!!!(
+qpJ!!!J'G!!)"RJ'I$3'H!!*b!!!$)!-V!D!"S3d"S!!#BJ!!!b!$*`'L!D-0!D)
+!!@m!!!-J!b2qp3[qp3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9
+b8'&dD!d"S`!"E3!!!b-$*J'N$!'N!!N!!cTND!!#!!!0!D%!!@m!!!!!!!$qp![
+qp!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J'I!!)"T3'Q$3'P!!0*!!)$,!0@r[2
+qmJ'R#[lc!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(qmJ!!"J'R!!2qm3'
+S!DN+r[%!"!TVEf0X$3'S!!&Y!!!$-!-cr[!+r[!!"!TKE'PK"J'T!!2ql`'U!DX
++rZm!"!TTER0S$3'U!!)d!!!$0J-qrZi"V!VqlJ!%#Q0QEf`0!D`!!@m!!!-k!ch
+ql3[ql3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'!DX!!rlX!Dhqk`Vql!!%#R4[)#!0!Dd!!Qi!!!0"!e!"VJ'
+[$3'Z!!)d!!!$5303rZS"X!VqkJ!%#QCTE'80!E!!!@d!!!0-!dm"X3`"X3!+!!4
+ND#jS!!)!!!d"V`!#0!!!!d%$5IlT!E)+rZN!"!TMCQpX$3'b!!&[!!!$430)rZJ
+,rZJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eqk`!!!J'Q!!)"X`'d$3'c!!*X!!)
+$9`0ArZIqjJ(qj`!!!IlQ!!!#!E3!!J'e!EB0!E8!!R)!!!0A!f)"Y`'i$3'h!!*
+L!!!$9`0H!EN"ZJd"Z3!"E`!!!eF$@[lP#rlP!#3`!""MFRP`G'pQEfaNCA*`BA4
+S!""MFRP`G'p'EfaNCA*3BA4S$3'k!!&Y!!!$@J0G!EX-!EX!#J!%1Q4cB3!#!!!
+0!EJ!!@m!!!!!!!$qj![qj!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J'f!!)"[!'
+p$3'm!!0*!!)$B`10rZ2qiJ'q#[lM!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9
+XE!(qiJ!!"J'q!!2qi3'r!F!+rZ%!"!TVEf0X$3'r!!&Y!!!$C`0UrZ!+rZ!!"!T
+KE'PK"J(!!!2qh`("!F)+rYm!"!TTER0S$3("!!)d!!!$E30erYi"``VqhJ!%#Q0
+QEf`0!F-!!@m!!!0a!h6qh3[qh3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4
+S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!F)!!rlF!F6qf`Vqh!!%#R4[)#!
+0!F3!!Qi!!!0i!iF"a3('$3(&!!)d!!!$J!1(rYS"a`VqfJ!%#QCTE'80!FF!!@d
+!!!1$!iB"b!`"b!!,!!9NFf%ZD!!#!!!0!FB!!M3!!!0i!i$qf3(*#[lC!!3+BfC
+[E!d"b3!"E`!!!h`$IrlB#rlB!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rYX!!!)
+"[3!#!FS"b`d"bJ!#E!!#!ii$M[lArYB"rYF!!!(qeJ!!!J(,!!)"c!(0$3(-!!*
+b!!!$MJ1C!Fi"c`d"cJ!#BJ!!!ii$P3(3!G%0!G!!!@m!!!11!j(qe3[qe3!N-!!
+3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"d3!"E3!!!j%$P!(
+5$!(5!!S!"$TPFR)!!J!!$3(2!!&[!!!!!!!!rY3,rY3!&$!!#(4PEA"`BA4S!!K
+dC@e`8'&dD!)"c3!#!G-"e!d"d`!$53!#!jS$a2l6rY)"e3Vqd`!B,Q0[FQ9MFQ9
+X+LSU+J!!!!!!!*!!!'jeE'`"rY)!!!B"e3!$rY%"eJ(A#[l4!!3+DfpME!d"eJ!
+"E3!!!ji$SIl3#[l3!!3+B@aTB3B"e`!$rXm"f!(C#[l2!!3+D@jcD!d"f!!#0!!
+!!k3$V2l1!GS+rXi!"!TMCQpX$3(D!!&[!!!$U!1VrXd,rXd!0$!!''p`C@jcFfa
+TEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J(C!!2
+qc!(ErXX+rX`!"!TdEb!J$3(E!!*Z!!!$V`1q!G`"h3d"h!!#0!!!!lF$[[l+!Gi
++rXS!"!TQD@aP$3(H!!&Y!!!$ZJ1p!Gm-!Gm!#`!&CA*b,QJ!!J!!$3(G!!)d!!!
+$V`1hrXN"i!Vqb3!%#Q0QEf`0!H!!!@m!!!1c!lEqb![qb!!8-!!)G'9YF("KG'J
+!#(4PEA"3BA4S"[l,!!!#!G3!!J(K!H)0!H%!!Q`!!J2&!mAqarl'!Il(!!!"rXB
+!!!)"iJ!#!H-"j!d"i`!#FJ!!!m8$d!(P!HB0!H8!!Q)!!!2&!m`"j`(S$3(R!!&
+[!!!$a32)rX8,rX8!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC[E'4PFP"
+KG'J0!HJ!!@d!!!2)!mX"k3`"k3!+!!3kCAC`!!)!!!d"jJ!"E`!!!!!!!2l%#rl
+%!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!H3!!J(U!HX0!HS!!dN!!J24!r[q`rl
+#!H`+rX-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Il#!!!'!H`!!rl"!Hd
+"lJVq`3!%#QY[Bf`0!Hd!!@d!!!29!pMq`!Vq`!!%#Q&XD@%'!Hi!!rkr!Hm"m!V
+q[`!%#QPZFfJ0!Hm!!M3!!!2E!q2q[J(a#[kq!!3+BfC[E!d"m3!"E`!!!pm$i[k
+p#rkp!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4
+P4QpXC'9b8'&dD!B"m!!$rV`"m[kl#[km!!3+G'mJ)!d"mJ!#EJ!!!qB$p3(c!I3
+0!I-!!M3!!!2Z!rAqZJ(e#[kk!!3+CQPXC3d"p3!"E3!!!r%$p!(f$!(f!!X!"@9
+fF#jS!!)!!!d"p!!#0!!!!qB$l[kj!IF+rVN!"!TMCQpX$3(h!!&[!!!$kJ2YrVJ
+,rVJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!EqZ`!!!J(V!!)"q!(j$3(i!!*X!!)
+$r!2mrVIqYJ(qY`!!!Ikf!!!#!IN!!J(k!IX0!IS!!R)!!!2m"!F"r!(p$3(m!!*
+L!!!$r!3$!Ii"r`d"rJ!"E`!!!r`$rrke#rke!#3`!""MFRP`G'pQEfaNCA*`BA4
+S!""MFRP`G'p'EfaNCA*3BA4S$3(r!!&Y!!!$r`3#!J!-!J!!#`!&1QKYB@-!!J!
+!$3(p!!&[!!!!!!!!rV3,rV3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)"q`!#!J%
+#!Jd#!3!$53!#"!J%-[kcrV)#!`VqX`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'j
+eE'`"rV)!!!B#!`!$rV%#"!)&#[ka!!3+DfpME!d#"!!"E3!!"!`%$rk`#[k`!!3
++B@aTB3B#"3!$rUm#"J)(#[k[!!3+D@jcD!d#"J!#0!!!"")%'[kZ!JJ+rUi!"!T
+MCQpX$3))!!&[!!!%&J3CrUd,rUd!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&
+dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J)(!!2qV!)*rUX+rU`!"!TdEb!
+J$3)*!!*Z!!!%(33X!JS##`d##J!#0!!!"#8%,2kU!J`+rUS!"!TQD@aP$3)-!!&
+Y!!!%+!3V!Jd-!Jd!$!!'D'eKBbjS!!)!!!d##`!#0!!!""d%*IkT!Ji+rUN!"!T
+MCQpX$3)1!!&[!!!%)33NrUJ,rUJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!EqU`!
+!!J)#!!)#$`)3$3)2!!*X!!)%-`3crUIqTJ(qT`!!!IkQ!!!#!K!!!J)4!K)0!K%
+!!R)!!!3c"$i#%`)8$3)6!!*L!!!%-`3k!K8#&Jd#&3!"E`!!"$-%0[kP#rkP!#3
+`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3)@!!&Y!!!%0J3
+j!KF-!KF!#`!&1QPNC@%!!J!!$3)8!!&[!!!!!!!!rU3,rU3!&$!!#(4PEA"`BA4
+S!!KdC@e`8'&dD!)#%J!#!KJ#'3d#'!!$53!#"$m%DIkMrU)#'JVqS`!B,Q0[FQ9
+MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rU)!!!B#'J!$rU%#'`)F#[kK!!3+DfpME!d
+#'`!"E3!!"%-%4[kJ#[kJ!!3+B@aTB3B#(!!$rTm#(3)H#[kI!!3+D@jcD!d#(3!
+#0!!!"%N%8IkH!Km+rTi!"!TMCQpX$3)I!!&[!!!%6343rTd,rTd!0$!!''p`C@j
+cFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J)
+H!!2qR!)JrTX+rT`!"!TdEb!J$3)J!!*Z!!!%9!4M!L%#)Jd#)3!#0!!!"&`%Brk
+D!L-+rTS!"!TQD@aP$3)M!!&Y!!!%A`4L!L3-!L3!$!!'D@4PB5jS!!)!!!d#)J!
+#0!!!"&3%A2kC!L8+rTN!"!TMCQpX$3)P!!&[!!!%@!4ErTJ,rTJ!&$!!#(4PEA"
+`BA4S!!KdC@e`8'&dD!EqQ`!!!J)C!!)#*J)R$3)Q!!*X!!)%DJ4UrTIqPJ(qP`!
+!!Ik@!!!#!LF!!J)S!LN0!LJ!!R)!!!4U"(8#+J)V$3)U!!*L!!!%DJ4a!L`#,3d
+#,!!"E`!!"'S%EIk9#rk9!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'Efa
+NCA*3BA4S$3)Y!!&Y!!!%E34`!Li-!Li!$!!'1QaSBA0S!!)!!!d#+`!"E`!!!!!
+!!2k8#rk8!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!LN!!J)[!M!0!Lm!!dN!!J4
+f"+$qNrk5!M%+rT-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ik5!!!'!M%
+!!rk4!M)#-`VqN3!%#QY[Bf`0!M)!!@d!!!4k"(hqN!!+rT!!!!3+B@aTB3B#-`!
+$rSm#0!)e#[k2!!3+D@jcD!d#0!!#0!!!")!%L2k1!MB+rSi!"!TMCQpX$3)f!!&
+[!!!%K!5(rSd,rSd!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP0
+66%PZBfaeC'9'EfaNCA*3BA4S"J)e!!2qM!)hrSX+rS`!"!TdEb!J$3)h!!*Z!!!
+%L`5D!MJ#13d#1!!#0!!!"*-%Q[k+!MS+rSS!"!TQD@aP$3)k!!&Y!!!%PJ5C!MX
+-!MX!$3!(E'KKFfJZD!!#!!!0!MN!!M3!!!5,"*2qL3)m#[k*!!3+BfC[E!d#2!!
+"E`!!")m%N[k)#rk)!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rSX!!!)#-!!#!Md
+#2Jd#23!#E!!#"+%%SIk(rSB"rSF!!!(qKJ!!!J)q!!)#2`*!$3)r!!*b!!!%S35
+X!N%#3Jd#33!#BJ!!"+%%U!*$!N30!N-!!@m!!!5K"+6qK3[qK3!N-!!3Bh*jF(4
+[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d#4!!"E3!!"+3%T`*&$!*&!!S
+!"$TYC$)!!J!!$3*#!!&[!!!!!!!!rS3,rS3!&$!!#(4PEA"`BA4S!!KdC@e`8'&
+dD!)#3!!#!NB#4`d#4J!$53!#"+d%erk$rS)#5!VqJ`!B,Q0[FQ9MFQ9X+LSU+J!
+!!!!!!*!!!'jeE'`"rS)!!!B#5!!$rS%#53*+#[k"!!3+DfpME!d#53!"E3!!",%
+%Y2k!#[k!!!3+B@aTB3B#5J!$rRm#5`*-#[jr!!3+D@jcD!d#5`!#0!!!",F%[rj
+q!Nd+rRi!"!TMCQpX$3*0!!&[!!!%Z`5qrRd,rRd!0$!!''p`C@jcFfaTEQ0XG@4
+PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J*-!!2qI!*1rRX
++rR`!"!TdEb!J$3*1!!*Z!!!%`J64!Nm#8!d#6`!#0!!!"-S%dIjk!P%+rRS!"!T
+QD@aP$3*4!!&Y!!!%c363!P)-!P)!#`!&E@3b,QJ!!J!!$3*3!!)d!!!%`J6+rRN
+#8`VqH3!%#Q0QEf`0!P-!!@m!!!6'"-RqH![qH!!8-!!)G'9YF("KG'J!#(4PEA"
+3BA4S"[jl!!!#!NF!!J*8!P80!P3!!Q`!!J6B"0MqGrjf!Ijh!!!"rRB!!!)#93!
+#!PB#9`d#9J!#FJ!!"0J%i`*B!PN0!PJ!!Q)!!!6B"0m#@J*E$3*D!!&[!!!%f!6
+ErR8,rR8!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!PX
+!!@d!!!6E"0i#A!`#A!!+!!3kE@3e!!)!!!d#@3!"E`!!!!!!!2jd#rjd!"3`!!K
+dC@e`F'&dD!!)G'9YF&"KG'J#!PF!!J*G!Pi0!Pd!!dN!!J6N"3lqFrjb!Pm+rR-
+!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ijb!!!'!Pm!!rja!Q!#B3VqF3!
+%#QY[Bf`0!Q!!!@d!!!6S"1[qF!VqF!!%#Q&XD@%'!Q%!!rj[!Q)#B`VqE`!%#QP
+ZFfJ0!Q)!!M3!!!6Z"2EqEJ*N#[jZ!!3+BfC[E!d#C!!"E`!!"2)%pIjY#rjY!$3
+`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9
+b8'&dD!B#B`!$rQ`#CIjV#[jX!!3+G'mJ)!d#C3!#EJ!!"2N&#!*Q!QF0!QB!!M3
+!!!8""3MqDJ*S#[jU!!3+CQPXC3d#D!!"E3!!"33&"`*T$!*T!!X!"@eN05jS!!)
+!!!d#C`!#0!!!"2N&!IjT!QS+rQN!"!TMCQpX$3*U!!&[!!!%r38!rQJ,rQJ!&$!
+!#(4PEA"`BA4S!!KdC@e`8'&dD!EqD`!!!J*H!!)#D`*X$3*V!!*X!!)&$`82rQI
+qCJ(qC`!!!IjQ!!!#!Q`!!J*Y!Qi0!Qd!!R)!!!82"4S#E`*`$3*[!!*L!!!&$`8
+@!R%#FJd#F3!"E`!!"3m&%[jP#rjP!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP
+`G'p'EfaNCA*3BA4S$3*b!!&Y!!!&%J89!R--!R-!#`!&1QeNBc)!!J!!$3*`!!&
+[!!!!!!!!rQ3,rQ3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)#EJ!#!R3#G3d#G!!
+$53!#"4X&4IjMrQ)#GJVqB`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rQ)
+!!!B#GJ!$rQ%#G`*i#[jK!!3+DfpME!d#G`!"E3!!"4m&)[jJ#[jJ!!3+B@aTB3B
+#H!!$rPm#H3*k#[jI!!3+D@jcD!d#H3!#0!!!"58&,IjH!RX+rPi!"!TMCQpX$3*
+l!!&[!!!&+38XrPd,rPd!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"
+PEP066%PZBfaeC'9'EfaNCA*3BA4S"J*k!!2qA!*mrPX+rP`!"!TdEb!J$3*m!!*
+Z!!!&-!8r!Rd#IJd#I3!#0!!!"6J&2rjD!Rm+rPS!"!TQD@aP$3*r!!&Y!!!&1`8
+q!S!-!S!!$!!'E@4M-LjS!!)!!!d#IJ!#0!!!"6!&12jC!S%+rPN!"!TMCQpX$3+
+"!!&[!!!&0!8hrPJ,rPJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eq@`!!!J*e!!)
+#JJ+$$3+#!!*X!!)&4J9'rPIq9J(q9`!!!Ij@!!!#!S-!!J+%!S80!S3!!R)!!!9
+'"9%#KJ+($3+'!!*L!!!&4J90!SJ#L3d#L!!"E`!!"8B&5Ij9#rj9!#3`!""MFRP
+`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3+*!!&Y!!!&539-!SS-!SS
+!$J!)1QpLDQ9MG(-!!J!!$3+(!!&[!!!!!!!!rP3,rP3!&$!!#(4PEA"`BA4S!!K
+dC@e`8'&dD!)#K3!#!SX#M!d#L`!$53!#"9)&I2j6rP)#M3Vq8`!B,Q0[FQ9MFQ9
+X+LSU+J!!!!!!!*!!!'jeE'`"rP)!!!B#M3!$rP%#MJ+2#[j4!!3+DfpME!d#MJ!
+"E3!!"9B&@Ij3#[j3!!3+B@aTB3B#M`!$rNm#N!!#N3Vq6`!%#QPZFfJ0!T!!!!)
+d!!!&A!9NrNi#NJVq6J!%#Q0QEf`0!T)!!@m!!!9J"@2q63[q63!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!T%
+!!rj-!T2q5`Vq6!!%#R4[)#!0!T-!!Qi!!!9R"AB#P!+9$3+8!!)d!!!&E`9frNS
+#PJVq5J!%#QCTE'80!TB!!@d!!!9b"A8#P``#P`!2!!P[BQTPBh4c,QJ!!J!!$3+
+9!!)d!!!&C`9[rNN#Q!Vq53!%#Q0QEf`0!TJ!!@m!!!9V"@lq5![q5!!8-!!)G'9
+YF("KG'J!#(4PEA"3BA4S"[j,!!!#!S`!!J+C!TS0!TN!!Q`!!J9p"Ahq4rj'!Ij
+(!!!"rNB!!!)#QJ!#!TX#R!d#Q`!#FJ!!"Ad&L!+G!Ti0!Td!!Q)!!!9p"B3#R`+
+J$3+I!!&[!!!&I3@!rN8,rN8!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC
+[E'4PFP"KG'J0!U!!!@d!!!@!"B-#S3`#S3!+!!3kF'9Y!!)!!!d#RJ!"E`!!!!!
+!!2j%#rj%!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!T`!!J+L!U-0!U)!!dN!!J@
+*"E2q3rj#!U3+rN-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ij#!!!'!U3
+!!rj"!U8#TJVq33!%#QY[Bf`0!U8!!@d!!!@0"C!!rN!+rN!!"!TKE'PK"J+Q!!2
+q2`+R!UJ+rMm!"!TTER0S$3+R!!)d!!!&N`@ErMi#U3Vq2J!%#Q0QEf`0!UN!!@m
+!!!@A"CVq23[q23!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0
+-5@jME(9NC8C[E'4PFP"KG'J'!UJ!!rim!UVq1`Vq2!!%#R4[)#!0!US!!Qi!!!@
+H"Dd#U`+X$3+V!!)d!!!&TJ@YrMS#V3Vq1J!%#QCTE'80!Ud!!@d!!!@T"D`#VJ`
+#VJ!,!!9`C@dZD!!#!!!0!U`!!M3!!!@H"DEq13+[#[ij!!3+BfC[E!d#V`!"E`!
+!"D)&TIii#rii!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rMX!!!)#S`!#!V!#X3d
+#X!!$53!#"E3&h[ihrMB#XJVq0`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`
+"rMB!!!B#XJ!$rM8#X`+d#[ie!!3+DfpME!d#X`!"E3!!"EJ&Zrid#[id!!3+B@a
+TB3B#Y!!$rM-#Y3+f#[ic!!3+D@jcD!d#Y3!#0!!!"Ei&a[ib!VF+rM)!"!TMCQp
+X$3+h!!&[!!!&`JA&rM%,rM%!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!
+BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J+f!!2q-!+irLm+rM!!"!TdEb!J$3+
+i!!*Z!!!&b3AB!VN#ZJd#Z3!#0!!!"G%&f2iZ!VX+rLi!"!TQD@aP$3+l!!&Y!!!
+&e!AA!V`-!V`!$!!'F'9Y-LjS!!)!!!d#ZJ!#0!!!"FN&dIiY!Vd+rLd!"!TMCQp
+X$3+p!!&[!!!&c3A3rL`,rL`!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eq,`!!!J+
+a!!)#[J+r$3+q!!*X!!)&h`AIrL[q+J(q+`!!!IiU!!!#!Vm!!J,!!X%0!X!!!R)
+!!!AI"HS#`J,$$3,#!!*L!!!&h`AQ!X3#a3d#a!!"E`!!"Gm&i[iT#riT!#3`!""
+MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3,&!!&Y!!!&iJAP!XB
+-!XB!$3!(1R"VBh-a-J!#!!!0!X-!!@m!!!!!!!$q+![q+!!8-!!)G'9YF("KG'J
+!#(4PEA"3BA4S!J,"!!)#a`,)$3,(!!0*!!)&k`B9rLIq*J,*#[iR!"JZBfpbC@0
+bC@`U+LSU!!!!!!!!N!!!ER9XE!(q*J!!"J,*!!2q*3,+!XX+rL8!"!TVEf0X$3,
++!!&Y!!!&l`AbrL3+rL3!"!TKE'PK"J,,!!2q)`,-!Xd+rL-!"!TTER0S$3,-!!)
+d!!!&p3AprL)#cJVq)J!%#Q0QEf`0!Xi!!@m!!!Aj"Icq)3[q)3!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!Xd
+!!riJ!Xrq(`Vq)!!%#R4[)#!0!Xm!!Qi!!!B!"Jm#d!,4$3,3!!)d!!!'#!B2rKi
+#dJVq(J!%#QCTE'80!Y)!!@d!!!B,"Ji#d``#d`!1!!K`Df0c-6)ZD!!#!!!0!Y%
+!!M3!!!B!"JMq(3,8#[iG!!3+BfC[E!d#e!!"E`!!"J3'"riF#riF!"3`!!KdC@e
+`F'&dD!!)G'9YF&"KG'J'rKm!!!)#b!!#!Y8#eJd#e3!#E!!#"KB'&[iErKS"rKX
+!!!(q'J!!!J,@!!)#e`,B$3,A!!*b!!!'&JBK!YN#fJd#f3!#BJ!!"KB'(3,E!Y`
+0!YX!!@m!!!B@"KRq'3[q'3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4Qp
+XC'9b8'&dD!d#h!!"E3!!"KN'(!,G$!,G!!`!"MT`Df0c0`!#!!!0!YS!!@m!!!!
+!!!$q'![q'!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J,B!!)#hJ,I$3,H!!0*!!)
+')JC-rKIq&J,J#[iA!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(q&J!!"J,
+J!!2q&3,K!Z)+rK8!"!TVEf0X$3,K!!&Y!!!'*JBTrK3+rK3!"!TKE'PK"J,L!!2
+q%`,M!Z3+rK-!"!TTER0S$3,M!!)d!!!',!BdrK)#j3Vq%J!%#Q0QEf`0!Z8!!@m
+!!!B`"M2q%3[q%3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0
+-5@jME(9NC8C[E'4PFP"KG'J'!Z3!!ri3!ZEq$`Vq%!!%#R4[)#!0!ZB!!Qi!!!B
+h"NB#j`,S$3,R!!)d!!!'2`C'rJi#k3Vq$J!%#QCTE'80!ZN!!@d!!!C#"N8#kJ`
+#kJ!0!!G`Df0c0bjS!!)!!!d#k!!#0!!!"MF'2ri0!ZX+rJd!"!TMCQpX$3,V!!&
+[!!!'1`BqrJ`,rJ`!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eq$`!!!J,I!!)#l!,
+Y$3,X!!*X!!)'63C0rJ[q#J(q#`!!!Ii+!!!#!Zd!!J,Z!Zm0!Zi!!R)!!!C0"PJ
+#m!,a$3,`!!*L!!!'63C8![)#m`d#mJ!"E`!!"Nd'82i*#ri*!#3`!""MFRP`G'p
+QEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3,c!!&Y!!!'8!C6![3-![3!#`!
+&1R*KEQ3!!J!!$3,a!!&[!!!!!!!!rJJ,rJJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&
+dD!)#l`!#![8#pJd#p3!$53!#"PN'Jri(rJB#p`Vq"`!B,Q0[FQ9MFQ9X+LSU+J!
+!!!!!!*!!!'jeE'`"rJB!!!B#p`!$rJ8#q!,j#[i&!!3+DfpME!d#q!!"E3!!"Pd
+'B2i%#[i%!!3+B@aTB3B#q3!$rJ-#qJ,l#[i$!!3+D@jcD!d#qJ!#0!!!"Q-'Dri
+#![`+rJ)!"!TMCQpX$3,m!!&[!!!'C`CUrJ%,rJ%!0$!!''p`C@jcFfaTEQ0XG@4
+PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J,l!!2q!!,prIm
++rJ!!"!TdEb!J$3,p!!*Z!!!'EJCp![i#r`d#rJ!#0!!!"RB'IIhq!`!+rIi!"!T
+QD@aP$3-!!!&Y!!!'H3Cm!`%-!`%!$!!'FQ&ZC#jS!!)!!!d#r`!#0!!!"Qi'G[h
+p!`)+rId!"!TMCQpX$3-#!!&[!!!'FJCerI`,rI`!&$!!#(4PEA"`BA4S!!KdC@e
+`8'&dD!Epr`!!!J,f!!)$!`-%$3-$!!*X!!)'K!D%rI[pqJ(pq`!!!Ihk!!!#!`3
+!!J-&!`B0!`8!!R)!!!D%"Sm$"`-)$3-(!!*L!!!'K!D,!`N$#Jd$#3!"E`!!"S3
+'Krhj#rhj!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3-
++!!&Y!!!'K`D+!`X-!`X!#J!%1R*M-J!#!!!0!`J!!@m!!!!!!!$pq![pq!!8-!!
+)G'9YF("KG'J!#(4PEA"3BA4S!J-'!!)$$!-0$3--!!0*!!)'N!!'Z[hhrIB$$JV
+pp`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rIB!!!B$$J!$rI8$$`-3#[h
+e!!3+DfpME!d$$`!"E3!!"T3'Prhd#[hd!!3+B@aTB3B$%!!$rI-$%3-5#[hc!!3
++D@jcD!d$%3!#0!!!"TS'S[hb!a-+rI)!"!TMCQpX$3-6!!&[!!!'RJDKrI%,rI%
+!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'Efa
+NCA*3BA4S"J-5!!2pm!-8rHm+rI!!"!TdEb!J$3-8!!*Z!!!'T3Dd!a8$&Jd$&3!
+#0!!!"Ud'Y2hZ!aF+rHi!"!TQD@aP$3-A!!&Y!!!'X!Dc!aJ-!aJ!#`!&FQ-b,QJ
+!!J!!$3-@!!)d!!!'T3DYrHd$'3Vpl3!%#Q0QEf`0!aN!!@m!!!DT"Ucpl![pl!!
+8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[h[!!!#!`d!!J-D!aX0!aS!!Q`!!JDl"V[
+pkrhU!IhV!!!"rHS!!!)$'`!#!a`$(3d$(!!#FJ!!"VX'aJ-H!am0!ai!!Q)!!!D
+l"X)$)!-K$3-J!!&[!!!'Z`DqrHN,rHN!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0
+bHA"dEdC[E'4PFP"KG'J0!b%!!@d!!!Dq"X%$)J`$)J!+!!3kFQ-d!!)!!!d$(`!
+"E`!!!!!!!2hS#rhS!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!ad!!J-M!b30!b-
+!!dN!!JE("[(pjrhQ!b8+rHF!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ih
+Q!!!'!b8!!rhP!bB$*`Vpj3!%#QY[Bf`0!bB!!@d!!!E,"Xlpj!Vpj!!%#Q&XD@%
+'!bF!!rhM!bJ$+3Vpi`!%#QPZFfJ0!bJ!!M3!!!E4"YRpiJ-U#[hL!!3+BfC[E!d
+$+J!"E`!!"Y8'f2hK#rhK!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p
+`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B$+3!$rH!$+rhI#[hJ!!3+G'mJ)!d$+`!
+#EJ!!"Y`'k`-X!bd0!b`!!M3!!!EN"Z[phJ-Z#[hH!!3+CQPXC3d$,J!"E3!!"ZF
+'kJ-[$!-[!!X!"A*M0#jS!!)!!!d$,3!#0!!!"Y`'j2hG!c!+rGd!"!TMCQpX$3-
+`!!&[!!!'i!EMrG`,rG`!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eph`!!!J-N!!)
+$-3-b$3-a!!*X!!)'mJEbrG[pfJ(pf`!!!IhD!!!#!c)!!J-c!c30!c-!!R)!!!E
+b"[d$03-f$3-e!!*L!!!'mJEj!cF$1!d$0`!"E`!!"[)'pIhC#rhC!#3`!""MFRP
+`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3-i!!&Y!!!'p3Ei!cN-!cN
+!#J!%1R*M03!#!!!0!cB!!@m!!!!!!!$pf![pf!!8-!!)G'9YF("KG'J!#(4PEA"
+3BA4S!J-d!!)$1J-l$3-k!!0*!!)'rJFSrGIpeJ-m#[hA!"JZBfpbC@0bC@`U+LS
+U!!!!!!!!N!!!ER9XE!(peJ!!"J-m!!2pe3-p!ci+rG8!"!TVEf0X$3-p!!&Y!!!
+(!JF&rG3+rG3!"!TKE'PK"J-q!!2pd`-r!d!+rG-!"!TTER0S$3-r!!)d!!!(#!F
+3rG)$33VpdJ!%#Q0QEf`0!d%!!@m!!!F-"`rpd3[pd3!d-!!BEh"PER0cE'PZBfa
+eC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!d!!!rh3!d,
+pc`Vpd!!%#R4[)#!0!d)!!Qi!!!F6"b)$3`0%$30$!!)d!!!('`FLrFi$43VpcJ!
+%#QCTE'80!d8!!@d!!!FH"b%$4J`$4J!,!!9bBc8ZD!!#!!!0!d3!!M3!!!F6"a[
+pc30(#[h0!!3+BfC[E!d$4`!"E`!!"aF('[h-#rh-!"3`!!KdC@e`F'&dD!!)G'9
+YF&"KG'J'rFm!!!)$1`!#!dJ$53d$5!!#E!!#"bN(+Ih,rFS"rFX!!!(pbJ!!!J0
+*!!)$5J0,$30+!!*b!!!(+3Fd!d`$63d$6!!#BJ!!"bN(-!01!dm0!di!!@m!!!F
+T"bcpb3[pb3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d
+$6`!"E3!!"b`(,`03$!03!!d!"cTbDA"PE@3!!J!!$300!!&[!!!!!!!!rFJ,rFJ
+!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)$5`!#!e%$8Jd$83!$53!#"c8(Arh(rFB
+$8`Vpa`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rFB!!!B$8`!$rF8$9!0
+9#[h&!!3+DfpME!d$9!!"E3!!"cN(22h%#[h%!!3+B@aTB3B$93!$rF-$9J0A#[h
+$!!3+D@jcD!d$9J!#0!!!"cm(4rh#!eJ+rF)!"!TMCQpX$30B!!&[!!!(3`G'rF%
+,rF%!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9
+'EfaNCA*3BA4S"J0A!!2p`!0CrEm+rF!!"!TdEb!J$30C!!*Z!!!(5JGC!eS$@`d
+$@J!#0!!!"e)(@Ifq!e`+rEi!"!TQD@aP$30F!!&Y!!!(93GB!ed-!ed!$J!)FQP
+`C@eN,QJ!!J!!$30E!!)d!!!(5JG5rEd$AJVp[3!%#Q0QEf`0!ei!!@m!!!G1"e(
+p[![p[!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[fr!!!#!e)!!J0I!f!0!em!!Q`
+!!JGJ"f$pZrfk!Ifl!!!"rES!!!)$B!!#!f%$BJd$B3!#FJ!!"f!(D`0M!f30!f-
+!!Q)!!!GJ"fF$C30Q$30P!!&[!!!(B!GMrEN,rEN!*$!!%'0bHA"dEfC[E'4PFR"
+KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!fB!!@d!!!GM"fB$C``$C`!+!!3kFR0K!!)
+!!!d$C!!"E`!!!!!!!2fi#rfi!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!f)!!J0
+S!fN0!fJ!!dN!!JGX"jEpYrff!fS+rEF!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"
+ZG@aX!Iff!!!'!fS!!rfe!fX$E!VpY3!%#QY[Bf`0!fX!!@d!!!G`"h2pY!VpY!!
+%#Q&XD@%'!f`!!rfc!fd$EJVpX`!%#QPZFfJ0!fd!!M3!!!Gf"hlpXJ0[#[fb!!3
++BfC[E!d$E`!"E`!!"hS(IIfa#rfa!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"
+KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B$EJ!$rE!$F2f[#[f`!!3+G'm
+J)!d$F!!#EJ!!"i%(N!!$F30b$30a!!)d!!!(L3H3!2fZ!h-+rDi!"!TQD@aP$30
+c!!&Y!!!(M!H2!h3-!h3!#`!&FR0K,QJ!!J!!$30b!!)d!!!(J3H*rDd$G3VpV3!
+%#Q0QEf`0!h8!!@m!!!H&"iMpV![pV!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[f
+[!!!#!fN!!J0f!hF0!hB!!Q`!!JHA"jIpUrfU!IfV!!!"rDS!!!)$G`!#!hJ$H3d
+$H!!#FJ!!"jF(SJ0k!hX0!hS!!Q)!!!HA"ji$I!0p$30m!!&[!!!(P`HDrDN,rDN
+!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!hd!!@d!!!H
+D"jd$IJ`$IJ!-!!BkFh4KBfX!!J!!$30l!!&[!!!!!!!!rDJ,rDJ!&$!!#(4PEA"
+`BA4S!!KdC@e`8'&dD!)$H3!#!hm$J!d$I`!$53!#"k-(cIfRrDB$J3VpT`!B,Q0
+[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rDB!!!B$J3!$rD8$JJ1$#[fP!!3+Dfp
+ME!d$JJ!"E3!!"kF(U[fN#[fN!!3+B@aTB3B$J`!$rD-$K!1&#[fM!!3+D@jcD!d
+$K!!#0!!!"kd(YIfL!iB+rD)!"!TMCQpX$31'!!&[!!!(X3HdrD%,rD%!0$!!''p
+`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4
+S"J1&!!2pS!1(rCm+rD!!"!TdEb!J$31(!!*Z!!!(Z!I(!iJ$L3d$L!!#0!!!"m!
+(arfH!iS+rCi!"!TQD@aP$31+!!&Y!!!(``I'!iX-!iX!$3!(Fh4KBfXZD!!#!!!
+0!iN!!M3!!!Hi"m$pR31-#[fG!!3+BfC[E!d$M!!"E`!!"l`([rfF#rfF!"3`!!K
+dC@e`F'&dD!!)G'9YF&"KG'J'rCm!!!)$J!!#!id$MJd$M3!$53!#"mi(q2fErCS
+$M`VpQ`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rCS!!!B$M`!$rCN$N!!
+$N3VpQ3!%#QY[Bf`0!j!!!!&Y!!!(dJI9rCJ+rCJ!"!TKE'PK"J14!!2pP`15!j-
++rCF!"!TTER0S$315!!)d!!!(f!IJrCB$P!VpPJ!%#Q0QEf`0!j3!!@m!!!IF"pr
+pP3[pP3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'!j-!!rf8!jApN`VpP!!%#R4[)#!0!j8!!Qi!!!IM"r)$PJ1
+A$31@!!)d!!!(k`IbrC)$Q!VpNJ!%#QCTE'80!jJ!!@d!!!IZ"r%$Q3`$Q3!4!!Y
+cB@CPFh4KBfXZD!!#!!!0!jF!!M3!!!IM"q[pN31D#[f4!!3+BfC[E!d$QJ!"E`!
+!"qF(k[f3!![pN!!!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!EpN`!!!J11!!)$Q`1
+F$31E!!*X!!)(q3IjrBrpMJ(pM`!!!If1!!!#!j`!!J1G!ji0!jd!!R)!!!Ij#!3
+$R`1J$31I!!*L!!!(q3J!!k%$SJd$S3!"E`!!"rN(r2f0#rf0!#3`!""MFRP`G'p
+QEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$31L!!&Y!!!(r!Ir!k--!k-!#J!
+%1R0SB3!#!!!0!k!!!@m!!!!!!!$pM![pM!!8-!!)G'9YF("KG'J!#(4PEA"3BA4
+S!J1H!!)$T!1P$31N!!0*!!))"3J[rB[pLJ1Q#[f,!"JZBfpbC@0bC@`U+LSU!!!
+!!!!!N!!!ER9XE!(pLJ!!"J1Q!!2pL31R!kJ+rBN!"!TVEf0X$31R!!&Y!!!)#3J
+-rBJ+rBJ!"!TKE'PK"J1S!!2pK`1T!kS+rBF!"!TTER0S$31T!!)d!!!)$`JArBB
+$U`VpKJ!%#Q0QEf`0!kX!!@m!!!J6#"EpK3[pK3!d-!!BEh"PER0cE'PZBfaeC'9
+QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!kS!!rf%!kcpJ`V
+pK!!%#R4[)#!0!k`!!Qi!!!JD##N$V31Z$31Y!!)d!!!))JJTrB)$V`VpJJ!%#QC
+TE'80!km!!@d!!!JP##J$X!`$X!!,!!9cD'%ZD!!#!!!0!ki!!M3!!!JD##,pJ31
+a#[f"!!3+BfC[E!d$X3!"E`!!#"i))If!#rf!!"3`!!KdC@e`F'&dD!!)G'9YF&"
+KG'J'rB-!!!)$T3!#!l)$X`d$XJ!#E!!##$!)-2errAi"rAm!!!(pIJ!!!J1c!!)
+$Y!1e$31d!!*b!!!)-!Jl!lB$Y`d$YJ!#BJ!!#$!)0`1i!lN0!lJ!!@m!!!J`#$2
+pI3[pI3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d$Z3!
+"E3!!#$-)0J1k$!1k!!d!"cTdH(4IC')!!J!!$31h!!&[!!!!!!!!rA`,rA`!&$!
+!#(4PEA"`BA4S!!KdC@e`8'&dD!)$Y3!#!lX$[!d$Z`!$53!##$`)C[elrAS$[3V
+pH`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rAS!!!B$[3!$rAN$[J1r#[e
+j!!3+DfpME!d$[J!"E3!!#%!)3rei#[ei!!3+B@aTB3B$[`!$rAF$`!2"#[eh!!3
++D@jcD!d$`!!#0!!!#%B)6[ef!m)+rAB!"!TMCQpX$32#!!&[!!!)5JK0rA8,rA8
+!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'Efa
+NCA*3BA4S"J2"!!2pG!2$rA-+rA3!"!TdEb!J$32$!!*Z!!!)83KJ!m3$a3d$a!!
+#0!!!#&N)B2eb!mB+rA)!"!TQD@aP$32'!!&Y!!!)A!KI!mF-!mF!$J!)G(KdAf4
+L,QJ!!J!!$32&!!)d!!!)83KCrA%$b!VpF3!%#Q0QEf`0!mJ!!@m!!!K9#&MpF![
+pF!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[ec!!!#!l`!!J2*!mS0!mN!!Q`!!JK
+R#'IpEreZ!Ie[!!!"r@i!!!)$bJ!#!mX$c!d$b`!#FJ!!#'F)FJ20!mi0!md!!Q)
+!!!KR#'i$c`23$322!!&[!!!)C`KUr@d,r@d!*$!!%'0bHA"dEfC[E'4PFR"KG'J
+!%'0bHA"dEdC[E'4PFP"KG'J0!p!!!@d!!!KU#'d$d3`$d3!,!!8kH$8`13!#!!!
+0!mi!!@m!!!!!!!$pE![pE!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J2-!!)$dJ2
+6$325!!0*!!))F`LGr@[pDJ28#[eV!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9
+XE!(pDJ!!"J28!!2pD329!pB+r@N!"!TVEf0X$329!!&Y!!!)G`Kkr@J+r@J!"!T
+KE'PK"J2@!!2pC`2A!pJ+r@F!"!TTER0S$32A!!)d!!!)I3L&r@B$f3VpCJ!%#Q0
+QEf`0!pN!!@m!!!L"#)6pC3[pC3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4
+S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!pJ!!reN!pVpB`VpC!!%#R4[)#!
+0!pS!!Qi!!!L)#*F$f`2F$32E!!)d!!!)N!!)PreL!pd+r@)!"!TQD@aP$32G!!&
+Y!!!)N`L@!pi-!pi!$!!'H$8`15jS!!)!!!d$h!!#0!!!#)J)N!$pB32I#[eK!!3
++BfC[E!d$h`!"E`!!#)`)MreJ#reJ!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'r@-
+!!!)$d`!#!q!$i3d$i!!$53!##*i)b2eIr9i$iJVpA`!B,Q0[FQ9MFQ9X+LSU+J!
+!!!!!!*!!!'jeE'`"r9i!!!B$iJ!$r9d$i`2N#[eG!!3+DfpME!d$i`!"E3!!#+)
+)TIeF#[eF!!3+B@aTB3B$j!!$r9X$j32Q#[eE!!3+D@jcD!d$j3!#0!!!#+J)X2e
+D!qF+r9S!"!TMCQpX$32R!!&[!!!)V!L[r9N,r9N!0$!!''p`C@jcFfaTEQ0XG@4
+PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J2Q!!2p@!2Sr9F
++r9J!"!TdEb!J$32S!!*Z!!!)X`M#!qN$kJd$k3!#0!!!#,X)`[e@!qX+r9B!"!T
+QD@aP$32V!!&Y!!!)[JM"!q`-!q`!%!!+H$8`19pfCRNZD!!#!!!0!qS!!M3!!!L
+c#,[p932Y#[e9!!3+BfC[E!d$l3!"E`!!#,F)Z[e8#re8!"3`!!KdC@e`F'&dD!!
+)G'9YF&"KG'J'r9F!!!)$i3!#!qi$l`d$lJ!#E!!##-N)bIe6r9)"r9-!!!(p8J!
+!!J2[!!)$m!2a$32`!!*b!!!)b3M8!r)$m`d$mJ!#BJ!!#-N)d!2d!r80!r3!!@m
+!!!M*#-cp83[p83!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&
+dD!d$p3!"E3!!#-`)c`2f$!2f!!d!"cTi06!jGM-!!J!!$32c!!&[!!!!!!!!r9!
+,r9!!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)$m3!#!rF$q!d$p`!$53!##08)rre
+2r8i$q3Vp6`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r8i!!!B$q3!$r8d
+$qJ2l#[e0!!3+DfpME!d$qJ!"E3!!#0N)h2e-#[e-!!3+B@aTB3B$q`!$r8X$r!2
+p#[e,!!3+D@jcD!d$r!!#0!!!#0m)jre+!ri+r8S!"!TMCQpX$32q!!&[!!!)i`M
+Qr8N,r8N!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfa
+eC'9'EfaNCA*3BA4S"J2p!!2p5!2rr8F+r8J!"!TdEb!J$32r!!*Z!!!)kJMj"!!
+%!3d%!!!#0!!!#2))qIe'"!)+r8B!"!TQD@aP$33#!!&Y!!!)p3Mi"!--"!-!$J!
+)H$8`1ABc,QJ!!J!!$33"!!)d!!!)kJMbr88%"!Vp43!%#Q0QEf`0"!3!!@m!!!M
+Z#2(p4![p4!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[e(!!!#!rJ!!J3&"!B0"!8
+!!Q`!!JN!#3$p3re#!Ie$!!!"r8)!!!)%"J!#"!F%#!d%"`!$53!##3!*+[e"r8!
+%#3Vp33!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r8!!!!B%#3!$r6m%#J3
+,#[dr!!3+DfpME!d%#J!"E3!!#33*"rdq#[dq!!3+B@aTB3B%#`!$r6d%$!30#[d
+p!!3+D@jcD!d%$!!#0!!!#3S*%[dm"!i+r6`!"!TMCQpX$331!!&[!!!*$JN4r6X
+,r6X!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9
+'EfaNCA*3BA4S"J30!!2p1J32r6N+r6S!"!TdEb!J$332!!*Z!!!*&3NN""!%%3d
+%%!!#0!!!#4d**2di"")+r6J!"!TQD@aP$335!!&Y!!!*)!NM""--""-!#`!&Fh0
+X,QJ!!J!!$334!!)d!!!*&3NGr6F%&!Vp0`!%#Q0QEf`0""3!!@m!!!NC#4cp0J[
+p0J!H-!!0Fh0XCQpXC'9bF'&dD!!0Fh0X4QpXC'9b8'&dD!Ep13!!!J3)!!)%&33
+@$339!!0*!!)*+`P9r6Ap0!3A#[de!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9
+XE!(p0!!!"J3A!!2p-`3B""N+r6-!"!TVEf0X$33B!!&Y!!!*,`Nbr6)+r6)!"!T
+KE'PK"J3C!!2p-33D""X+r6%!"!TTER0S$33D!!)d!!!*03Npr6!%(!Vp-!!%#Q0
+QEf`0""`!!@m!!!Nj#6cp,`[p,`!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4
+S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'""X!!rdZ""hp,3Vp,J!%#R4[)#!
+0""d!!Qi!!!P!#8m%(J3I$33H!!)d!!!*5!P2r5`%)!Vp,!!%#QCTE'80"#!!!@d
+!!!P,#8i%)3`%)3!-!!CcFf`b,QJ!!J!!$33I!!)d!!!*3!P)r5X%)JVp+`!%#Q0
+QEf`0"#)!!@m!!!P%#8Ip+J[p+J!H-!!0Fh0XCQpXC'9bF'&dD!!0Fh0X4QpXC'9
+b8'&dD!Ep,3!!!J3@!!)%)`3N$33M!!0*!!)*9JQ!r5Rp+!3P#[dT!"JZBfpbC@0
+bC@`U+LSU!!!!!!!!N!!!ER9XE!(p+!!!"J3P!!2p*`3Q"#F+r5F!"!TVEf0X$33
+Q!!&Y!!!*@JPGr5B+r5B!"!TKE'PK"J3R!!2p*33S"#N+r58!"!TTER0S$33S!!)
+d!!!*B!PSr53%+JVp*!!%#Q0QEf`0"#S!!@m!!!PN#@Ip)`[p)`!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'"#N
+!!rdL"#[p)3Vp)J!%#R4[)#!0"#X!!Qi!!!PV#AS%,!3Y$33X!!)d!!!*F`Pkr5!
+%,JVp)!!%#QCTE'80"#i!!@d!!!Pf#AN%,``%,`!0!!GcFf`b-bjS!!)!!!d%,3!
+#0!!!#@X*FrdI"$!+r4m!"!TMCQpX$33`!!&[!!!*E`Pbr4i,r4i!(M!!$A0cE'C
+[E'4PFR"KG'J!$A0cE%C[E'4PFP"KG'J'r5%!!!)%*!!#"$%%-Jd%-3!$53!##B%
+*UrdGr4`%-`Vp(3!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r4`!!!B%-`!
+$r4X%0!3e#[dE!!3+DfpME!d%0!!"E3!!#B8*L2dD#[dD!!3+B@aTB3B%03!$r4N
+%0J3h#[dC!!3+D@jcD!d%0J!#0!!!#BX*NrdB"$J+r4J!"!TMCQpX$33i!!&[!!!
+*M`Q5r4F,r4F!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%P
+ZBfaeC'9'EfaNCA*3BA4S"J3h!!2p&J3jr48+r4B!"!TdEb!J$33j!!*Z!!!*PJQ
+P"$S%1`d%1J!#0!!!#Ci*TId8"$`+r43!"!TQD@aP$33m!!&Y!!!*S3QN"$d-"$d
+!$!!'Fh0X-bjS!!)!!!d%1`!#0!!!#CB*R[d6"$i+r4-!"!TMCQpX$33q!!&[!!!
+*QJQGr4),r4)!(M!!$A0cE'C[E'4PFR"KG'J!$A0cE%C[E'4PFP"KG'J'r48!!!)
+%-J!#"$m%3!d%2`!$53!##D`*e[d4r4!%33Vp%3!B,Q0[FQ9MFQ9X+LSU+J!!!!!
+!!*!!!'jeE'`"r4!!!!B%33!$r3m%3J4$#[d2!!3+DfpME!d%3J!"E3!!#E!*Xrd
+1#[d1!!3+B@aTB3B%3`!$r3d%4!4&#[d0!!3+D@jcD!d%4!!#0!!!#EB*[[d-"%B
++r3`!"!TMCQpX$34'!!&[!!!*ZJQpr3X,r3X!0$!!''p`C@jcFfaTEQ0XG@4PCQp
+XC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J4&!!2p#J4(r3N+r3S
+!"!TdEb!J$34(!!*Z!!!*`3R3"%J%53d%5!!#0!!!#FN*d2d)"%S+r3J!"!TQD@a
+P$34+!!&Y!!!*c!R2"%X-"%X!$!!'G'ac-5jS!!)!!!d%53!#0!!!#F%*bId("%`
++r3F!"!TMCQpX$34-!!&[!!!*a3R)r3B,r3B!(M!!$A0cE'C[E'4PFR"KG'J!$A0
+cE%C[E'4PFP"KG'J'r3N!!!)%3!!#"%d%6Jd%63!#E!!##GF*erd&r33"r38!!!(
+p"!!!!J41!!)%6`43$342!!0*!!)*e`S"r32p!J44#[d$!"JZBfpbC@0bC@`U+LS
+U!!!!!!!!N!!!ER9XE!(p!J!!"J44!!2p!345"&-+r3%!"!TVEf0X$345!!&Y!!!
+*f`RHr3!+r3!!"!TKE'PK"J46!!2mr`48"&8+r2m!"!TTER0S$348!!)d!!!*i3R
+Tr2i%9JVmrJ!%#Q0QEf`0"&B!!@m!!!RP#HMmr3[mr3!d-!!BEh"PER0cE'PZBfa
+eC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'"&8!!rcm"&I
+mq`Vmr!!%#R4[)#!0"&F!!Qi!!!RX#IX%@!4C$34B!!)d!!!*p!Rlr2S%@JVmqJ!
+%#QCTE'80"&S!!@d!!!Rh#IS%@``%@`!1!!KMFRP`G'mZD!!#!!!0"&N!!M3!!!R
+X#I6mq34F#[cj!!3+BfC[E!d%A!!"E`!!#I!*mrci#rci!#3`!""MFRP`G'pQEfa
+NCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S"[cl!!!#"&!!!J4G"&i0"&d!!Q`!!JS
+##J,mprcf!Ich!!!"r2B!!!)%AJ!#"&m%B!d%A`!$53!##J)+,2cer23%B3Vmp3!
+B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r23!!!B%B3!$r2-%BJ4M#[cc!!3
++DfpME!d%BJ!"E3!!#JB+#Icb#[cb!!3+B@aTB3B%B`!$r2%%C!4P#[ca!!3+D@j
+cD!d%C!!#0!!!#J`+&2c`"'B+r2!!"!TMCQpX$34Q!!&[!!!+%!S6r1m,r1m!0$!
+!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*
+3BA4S"J4P!!2mlJ4Rr1d+r1i!"!TdEb!J$34R!!*Z!!!+&`SQ"'J%D3d%D!!#0!!
+!#Km+*[cX"'S+r1`!"!TQD@aP$34U!!&Y!!!+)JSP"'X-"'X!%!!+Eh"PER0cE(B
+ZD!!#!!!0"'N!!M3!!!SA#Krmk`4X#[cV!!3+BfC[E!d%E!!"E`!!#KX+([cU#rc
+U!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S"[cY!!!#"'!
+!!J4Y"'i0"'d!!dN!!JSY#PImkIcS"'m+r1N!'#jMEh*PBh*PE#SU+LS!!!!!!!#
+3!!"ZG@aX!IcS!!!'"'m!!rcR"(!%F3Vmj`!%#QY[Bf`0"(!!!@d!!!Sa#M6mjJV
+mjJ!%#Q&XD@%'"(%!!rcP"()%F`Vmj3!%#QPZFfJ0"()!!M3!!!Sh#Mrmj!4d#[c
+N!!3+BfC[E!d%G!!"E`!!#MX+2[cM#rcM!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4
+PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B%F`!$r1)%GIcK#[cL!!3
++G'mJ)!d%G3!#EJ!!#N)+834f"(F0"(B!!M3!!!T+#P(mi!4i#[cJ!!3+CQPXC3d
+%H!!"E3!!#Nd+8!4j$!4j!!i!#(4YC'PQCLjS!!)!!!d%G`!#0!!!#N)+5[cI"(S
++r0m!"!TMCQpX$34k!!&[!!!+4JT*r0i,r0i!*$!!%'0bHA"dEfC[E'4PFR"KG'J
+!%'0bHA"dEdC[E'4PFP"KG'J'r1%!!!)%EJ!#"(X%I!d%H`!#E!!##PJ+@2cGr0`
+"r0d!!!(mh!!!!J4m!!)%I34q$34p!!*X!!)+@!TBr0[mfJ(mf`!!!IcD!!!#"(i
+!!J4r")!0"(m!!dN!!JTB#S,mfIcB")%+r0N!'#jMEh*PBh*PE#SU+LS!!!!!!!#
+3!!"ZG@aX!IcB!!!'")%!!rcA"))%J`Vme`!%#QY[Bf`0"))!!@d!!!TF#PrmeJV
+meJ!%#Q&XD@%'")-!!rc9")3%K3Vme3!%#QPZFfJ0")3!!M3!!!TL#QVme!5'#[c
+8!!3+BfC[E!d%KJ!"E`!!#QB+DIc6#rc6!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4
+PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B%K3!$r0)%Krc4#[c5!!3
++G'mJ)!d%K`!#EJ!!#Qd+I!5)")N0")J!!M3!!!Te#Rcmd!5+#[c3!!3+CQPXC3d
+%LJ!"E3!!#RJ+H`5,$!5,!!`!"Q9IEh-ZD!!#!!!0")N!!M3!!!TY#RAmc`5-#[c
+2!!3+BfC[E!d%M!!"E`!!#R%+G2c1#rc1!#B`!"&[F'9ZFh0XCQpXC'9bF'&dD!!
+4Eh"PER0cE%C[E'4PFP"KG'J'r0%!!!)%J!!#")d%MJd%M3!$53!##S-+VIc0r-`
+%M`Vmc3!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r-`!!!B%M`!$r-X%N!!
+%N3Vmb`!%#QY[Bf`0"*!!!!&Y!!!+K`U+r-S+r-S!"!TKE'PK"J54!!2mb355"*-
++r-N!"!TTER0S$355!!)d!!!+M3U9r-J%P!Vmb!!%#Q0QEf`0"*3!!@m!!!U4#T6
+ma`[ma`!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'"*-!!rc'"*Ama3VmaJ!%#R4[)#!0"*8!!Qi!!!UB#UF%PJ5
+A$35@!!)d!!!+S!URr-3%Q!Vma!!%#QCTE'80"*J!!@d!!!UM#UB%Q3`%Q3!0!!G
+PAfpc-LjS!!)!!!d%P`!#0!!!#TJ+S2c$"*S+r--!"!TMCQpX$35D!!&[!!!+R!U
+Ir-),r-)!*M!!%@p`C@jcFfaQEfaNCA*`BA4S!"&[F'9ZFh0X4QpXC'9b8'&dD!E
+ma3!!!J51!!)%Qrc"$35E!!*X!!)+VJUZr-$m[`(m`!!!!Ibr!!!#r-%!!!d!#3!
+"E3!!!!!!!3!I!Irq!!!#!!B!!J5F"*d0"*`!!Q`!!J!!!!$m[[bp!Ibq!!!"r,d
+!!!)%R3!#"*i%R`d%RJ!#E!!##V%+b!5Jr,`0"+!!!dN!!JUa#XMmZ`5K"+)+r,X
+!'#jcHA0[C'a[Cf&cDh)!!!!!!!!!!&4&@&30"+%!!@d!!!Ua#V3%S``%S`!'!!!
+!!J!!"J5L!!2mZJ5N"+8+r,S!"!TLG'jc$35N!!&+!!!+Y`Um"+B#"+B!!J5Rr,N
+0"+F!!@d!!!Uh#VS%U!`%U!!+!!4%EfjP!!)!!!,mZ3!!"J5P!!2mZ!5Tr,F+r,J
+!"!TRDACe$35T!!&Y!!!+[`V#r,B$r,B!"3EmY`!!!Ibm!!!#"*m!!J5Ur,80"+S
+!!Q`!!J!!!!$mY2bc!Ibd!!!"r,-!!!,mY3!!$J!#!!!2%!!$!",mXJ5V"+`%V35
+Z"+m%X!5a",)%X`5d",8%YJ5hr,(mX2b[r+i"r,)!!"!%U`!3r+hmV2bVr+VmUIb
+Sr+ImT[bPr+6mSrbLr+(mS2bIr*i+r+d!'#jKCACdEf&`F'jeE'`!!)!!!!#3!!!
+U+LSU#rbX!")`!!GdD'9`BA4S!!GdD'93BA4S#rbV!"``!!adD'9[E'4NC@aTEA-
+!$(4SC8pXC%4PE'PYF`[mUJ!J-!!1G'KPF(*[DQ9MG("KG'J!$R4SC9"bEfTPBh4
+3BA4S#rbT!"B`!!PdD'9YCA"KG'J!#A4SC8eP8'&dD![mU!!Q-!!4D@jME(9NC@C
+[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S#rbR!$3`!"K[F'9ZFh0XD@jME(9
+NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD![mTJ!N-!!3Bh*
+jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD![mT3!H-!!0Fh0XCQpXC'9
+bF'&dD!!0Fh0X4QpXC'9b8'&dD![mT!!Q-!!4Eh"PER0cE'C[E'4PFR"KG'J!%@p
+`C@jcFfa'EfaNCA*3BA4S#rbM!#i`!"9dD'9ZCAGQEfaNCA*bC@CPFQ9ZBf8!&A4
+SC8jPGdC[E'4PFP*PCQ9bC@jMC3[mSJ!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!Ib
+K!!!"r+!!!!(mR`!!!IbH!!!1"+`!"a$mR35ir*cmQ`5j",VmQJVmR3!B,Q&PGR4
+[BA"`ER9XE!!!J!!!!*!!!#SU+LS0",J!!@X!!!!!#XJ%Z`)%Z`!#!!8%[!)%[!!
+#"*lmQ3,mQ3!!!IbF!!!#r*X!!"!%Z3!!%!5k!)B!(rbBr*ImP[b9r*6mNrb5!#c
+mNIb3!2b2r)lmMIb-!%rmL`"D!&[mLJ"Nr)N!EIb)r)ImKJ#2r)AmK2b$r),mJIb
+!r(rmI[apr(cmH`#Tr(VmHIair(F![Iaf!-ImG3$8!1)!l!$j!3-"%!%D!5F"-3%
+q!8J"93&I!@`"GJ'$!Bd"QJ'N!E%"Z`()!G)"h`(T!IB#!!)0!KF#*!)Z!MX#43*
+5!P`#D3*c!S!#LJ+A!U%#VJ+m!XB#d`,G!ZS#p!-"!`X$'!-L!bm$130'!e!$A30
+R!h3$IJ1,!jN$S`1`!lS$a`24!pi$l!2f"!-%%`3K"#m%234,"&X%D`4j")X%Q35
+Mr(3%U2acr(,mF3VmQ!!%#Q0[BQS+r*F!'#jPBA*cCQCNFQ&XDA-!!!!!!!!J!'&
+QC()+r*B!"!TMG(Kd#rb9!")`!!GdD'9`BA4S!!GdD'93BA4S#[b8!!3+BA0MFJV
+mN`!%#R4iC'`,r*)!($!!$(4SC@pXC'4PE'PYF`!-G'KP6faN4'9XD@ec#[b4!!3
++BfPdE32mN!$rr3[mM`!J-!!1G'KPF(*[DQ9MG("KG'J!$R4SC9"bEfTPBh43BA4
+S!rb1rri+r)d!"!T849K8#rb-!"B`!!PdD'9YCA"KG'J!#A4SC8eP8'&dD![mL`!
+Q-!!4D@jME(9NC@C[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S#rb+!$3`!"K
+[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&
+dD![mL3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD![mL!!
+H-!!0Fh0XCQpXC'9bF'&dD!!0Fh0X4QpXC'9b8'&dD![mK`!Q-!!4Eh"PER0cE'C
+[E'4PFR"KG'J!%@p`C@jcFfa'EfaNCA*3BA4S#[b'!!3+BfC[E!VmK3!B,QeTFf0
+cE'0d+LSU+J!!!!!!!*!!!#SU+LS+r)3!"!TcC@aP#[b$!"JZBfpbC@4PE'mU+LS
+U!!!!!!!!N!!!+LSU+J(mJJ!!![b"!!!+r)!!"!TVEf0X#[ar!!3+D@jcD!2mIJ!
+%#[ap!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!VmI!!%#R*cE(3,r(X!,M!
+!&A4SC@jPGfC[E'4PFR*PCQ9bC@jMC3!9G'KP6Q9h4QpXC'9b8Q9QCA*PEQ0P#[a
+k!!3+F'jKE3VmH3!%#Q&XD@%+r(J!"!TdEb!J#[ah!!3+CQPXC32mGJ!'#rae!"3
+`!!KdC@e`F'&dD!!)G'9YF&"KG'J+r(3!"!TLG'jc#[ac!!3+CfPfG32mFJ!&#[a
+a!"JZFhPcEf4XEfGKFfYb!!!!!!!!!!"849K8%IbD#XRJ%JUYi1%TDJ`!!LrM*N9
+4e%r&jLa&edrSaHBX4Nr%@qPF@eTVA&VU-NAE6m4Ek9aE@QYF@Z`bl5C&hNr,lbA
+Y*N9J!""2bf%!%59K!")Pl5C&B!!66mYK!"3Pl5C&B!!96mYK!"BPl5C&B!!A6m[
+Y*N9J!"K2amAQ,%C2&!!L+Q%!'9m!%#pK!"PK!"S[DJ`!'dmUB3!F,'S-!"eA!!K
+B!"i!(fK2+Q%!)'%!'@%!)5TK!"PI!"![B3!L$!!M6em!*%9J!#92A`!PDJ`!'dp
+K!#BUB3!F,'%!*ba'6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"R1,f%!+Q%!+bp
+K!#`-!#02A`!9B3!Y*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,Lp
+K!#TK!#m[B3!X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3!
+`,f%!,!`!)dpI!"9K!$%P4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!
+Z,f%!+Q%!-LpK!#`-!#02A`!9B3!c*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!
+T+Q%!'9m!,LpK!#TK!$3[B3!X$!!M6em!&@%!059&B!!Z6bTK!#"K!#KK!#%UB3!
+CA`!6,f%!+5TK!"PI!#i[B3!UB3!f,f%!,!`!)dpI!"9K!$FP4@!!,NmUB3!JB3!
+SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!1#pK!#`-!#02A`!9B3!j*89J!#j
+2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!$S[B3!X$!!M6em!&@%
+!1b9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3!m,f%!,!`
+!)dpI!"9K!$dP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%
+!2LpK!#`-!#02A`!9B3!r*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m
+!,LpK!#TK!%![B3!X$!!M6em!&@%!359&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%
+!+5TK!"PI!#i[B3!UB3"#,f%!,!`!)dpI!"9K!%-P4@!!,NmUB3!JB3!SB3!K+Q%
+!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!4#pK!#`-!#02A`!9B3"&*89J!#j2+Q%!)'%
+!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!%B[B3!X$!!M6em!&@%!4b9&B!!
+Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"),f%!,!`!)dpI!"9
+K!%NP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!5LpK!#`
+-!#02A`!9B3",*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#T
+K!%`[B3!X$!!M6em!&@%!659&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"P
+I!#i[B3!UB3"1,f%!,!`!)dpI!"9K!%mP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bp
+K!#NUB3!CA`!Z,f%!+Q%!8#pK!#`-!#02A`!9B3"4*89J!#j2+Q%!)'%!+'%!)5T
+K!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!&)[B3!X$!!M6em!&@%!8b9&B!!Z6bTK!#"
+K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"8,f%!,!`!)dpI!"9K!&8P4@!
+!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!9LpK!#`-!#02A`!
+9B3"A*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!&J[B3!
+X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"C,f%!,!`!)dp
+I!"9K!&SP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!@bp
+K!#`-!#02A`!9B3"F*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,Lp
+K!#TK!&d[B3!X$!!M6em!&@%!AL9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5T
+K!"PI!#i[B3!UB3"I,f%!,!`!)dpI!"9K!'!P4@!!,NmUB3!JB3!SB3!K+Q%!'9m
+!%bpK!#NUB3!CA`!Z,f%!+Q%!B5pK!#`-!#02A`!9B3"L*89J!#j2+Q%!)'%!+'%
+!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!'-[B3!X$!!M6em!&@%!C#9&B!!Z6bT
+K!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"P,f%!,!`!)dpI!"9K!'B
+P4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!CbpK!#`-!#0
+2A`!9B3"S*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!'N
+[B3!X$!!M6em!&@%!DL9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i
+[B3!UB3"V,f%!,!`!)dmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%
+!E#pK!#`-!#02A`!9B3"Y*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m
+!,LpK!#TK!'i[B3!X$!!M6em!&@%!Eb9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%
+!+5TK!"PI!#i[B3!UB3"`,f%!,!`!)dpI!"9K!(%P4@!!,NmUB3!JB3!SB3!K+Q%
+!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!FLpK!#`-!#02+Q%!)'%!+'%!)5TK!"PI!"-
+[B3!T+Q%!'9m!,LpK!#TK!(-[B3!X$!!M6em!&@%!G#9&B!!Z6bTK!#"K!#KK!#%
+UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"e,f%!,!`!)dmUB3!JB3!SB3!K+Q%!'9m
+!%bpK!#NUB3!CA`!A,f%!+Q%!GLpK!#`-!#02+Q%!)'%!+'%!)5TK!"PI!"-[B3!
+T+Q%!'9m!&bpK!#TK!(F[B3!X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"P
+I!"F[B3!UB3"i,f%!,!`!)dmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!A,f%
+!+Q%!H5pK!#`-!#02+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!&bpK!#TK!(S
+[B3!X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!"8[B3!UB3"l,f%!,!`
+!)dmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!9,f%!+Q%!I#pK!#`-!#02+Q%
+!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!&5pK!#TK!(d[B3!X$!!M6bTK!#"K!#K
+K!#%UB3!CA`!6,f%!+5TK!"PI!"J[B3!UB3"q,f%!,!`!)dmUB3!JB3!SB3!K+Q%
+!'9m!%bpK!#NUB3!CA`!B,f%!+Q%!IbpK!#`-!#028&92B3#!B3#"B3##DhCK!)0
+K!)4K!#)-!)82$!5Y!&%!5deKBfPZG'pcD#")4$T%CA0VG'p`)%C[E'4PFMT*EQ0
+[E@PZCcT[F'9ZFh0X,90139!Y-6Nj16%b-6%k6@&M6e-kE@YXD@jVFbjKF`!#!!!
+1"+i!!J6mF!5p!ra`!!%1",d!!3!%[J`%[J!'!!!!!J!!$J5[!!)%r'm%[`2mE`!
+%$J5r!!3!"-!%`36#"---"-!!%J!-6@&MD@jdEh0S)%K%!!)!!!`%`3!8!!j%CA0
+VG'p`)%C[E'4PFJ!#!!!-"-)!$J!)5@jMEfeTEQF!!J!!$!6$!"X!&@p`C@jcFf`
+Y8dj"8#da16Nj-6)a-3!#!!!-",!!4J"!6@&MD@jdEh0S)%K%1N4PFfYdEh!J4Qp
+XC'9b1NPZBfpYD@jR1Qp`C@jcFf`Y8dj"8#da16Nj-6)a-6T0B@028`!#!!!-",%
+!5!"#6@&MD@jdEh0S)%K%1N4PFfYdEh!J4QpXC'9b1NPZBfpYD@jR1Qp`C@jcFf`
+Y8dj"8#da16Nj-6)a-6TTEQ0XG@4P!!)!!!`%XJ"3!%T0B@0TER4[FfJJ5%3k4'9
+cDh4[F#"'EfaNCA)k5@jMEfeTEQFkEh"PER0cE#e66N&3,6%j16Na-M%a1QPZBfa
+eC'8kEh"PER0cE!!#!!!-",-!4`""6@&MD@jdEh0S)%K%1N4PFfYdEh!J4QpXC'9
+b1NPZBfpYD@jR1Qp`C@jcFf`Y8dj"8#da16Nj-6)a-6TMFRP`G'm!!J!!$!5d!%3
+!2NeKBfPZG'pcD#")4$T%CA0VG'p`)%C[E'4PFMT*EQ0[E@PZCcT[F'9ZFh0X,90
+139!Y-6Nj16%b-6%kFh0X!!)!!!`%Y3"!!$T0B@0TER4[FfJJ5%3k4'9cDh4[F#"
+'EfaNCA)k5@jMEfeTEQFkEh"PER0cE#e66N&3,6%j16Na-M%a!!)!!!i%YJ!"&!6
+%$J6%!!-B"-AmEJ6'$J6&!!-B"-ImE36)$J6(!!-B"-RmE!6+$J6*!!-B!"rmD`6
+,#[aV!!3+BfC[E!`%b`!1!!K*EQ0[E@PZC`!#!!!+r'`!"!TMCQpX$!6+!"X!&@p
+`C@jcFf`Y8dj"8#da16Nj-6)a-3!#!!!+r'd!"!TMCQpX$!6)!!d!"fPZBfaeC'8
+!!J!!#[aZ!!3+BfC[E!`%aJ!9!!peER4TG'aPC#"QEfaNCA)!!J!!$!5h!%i!5%e
+KBfPZG'pcD#")4$T%CA0VG'p`)%C[E'4PFMT*EQ0[E@PZCcT[F'9ZFh0X,90139!
+Y-6Nj16%b-6%kBh*jF(4[1RJe-$Pf-`!#!!!"r,%!!!(mX!!!!Ib[!!!"r+i!!'&
+cBh)!!3!-qYlHV3!!!3!!!*G#!!#@3J!!!AB!!$-8-0J!!!!F!AB!$h0MFhS!!!#
+#6Np853!!!)jcBh"d!!!!QP4&@&3!!3#QFh4jE!!!!,j$6d4&!!%!bN*14%`!!!$
+LBA"XG!!!!1j'8N9'!!!!qNP$6L-!!!%'D@0X0!!!!4*TBh-M!!!"(QPMFc3!!!%
+UD'CNFJ!!!6C659T&!!!"3PG3Eh-!!!&1!!$rr`!!!!!!!!!!!)$rre!!!"i!!!!
+!!)$rr`!!"cJ#DH#m"'Mrr`!!!*S!!!!!%iRrr`!!"Pi!!!!!"'Mrr`!!!53!!!!
+!!!$rrb!!!9)!!!!!!!(rra3!!@i#DG`%!)$rr`!!!Pi#DH"X!!$rr`!!!Ri!!!!
+!!)$rr`!!!S-#DH"d!*Err`!!!Si!!!!!!*Err`!!!j)!!!!!!*Err`!!"CB#DH%
+i!*Err`!!"GS#DH%dkF$rr`!!"[`!!!!!rrrrr`!!"a)!!!!!!)$rr`!!"b!!!!!
+!*4S:

MacOS/opensslconf.h

@@ -0,0 +1,116 @@
+/* MacOS/opensslconf.h */
+
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/usr/local/ssl"
+#endif
+#endif
+
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned char
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#define RC4_CHUNK unsigned long
+#endif
+#endif
+
+#if defined(HEADER_DES_H) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned long
+#endif
+#endif
+
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#if __option(longlong)
+#  define BN_LLONG
+#else
+#  undef BN_LLONG
+#endif
+
+/* Should we define BN_DIV2W here? */
+
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#undef RC4_INDEX
+#endif
+
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#define BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#define DES_PTR
+#endif
+
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#define DES_RISC1
+#endif
+
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+
+#endif /* HEADER_DES_LOCL_H */
+
+#ifndef __POWERPC__
+#define MD32_XARRAY
+#endif

Makefile.fips

@@ -1,638 +0,0 @@
-##
-## Makefile for OpenSSL: fipscanister.o only
-##
-
-VERSION=fips-2.0-test
-MAJOR=
-MINOR=
-SHLIB_VERSION_NUMBER=
-SHLIB_VERSION_HISTORY=
-SHLIB_MAJOR=
-SHLIB_MINOR=
-SHLIB_EXT=
-PLATFORM=dist
-OPTIONS=
-CONFIGURE_ARGS=
-SHLIB_TARGET=
-
-# HERE indicates where this Makefile lives.  This can be used to indicate
-# where sub-Makefiles are expected to be.  Currently has very limited usage,
-# and should probably not be bothered with at all.
-HERE=.
-
-# INSTALL_PREFIX is for package builders so that they can configure
-# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
-# Normally it is left empty.
-INSTALL_PREFIX=
-INSTALLTOP=/usr/local/ssl
-
-# Do not edit this manually. Use Configure --openssldir=DIR do change this!
-OPENSSLDIR=/usr/local/ssl
-
-# NO_IDEA - Define to build without the IDEA algorithm
-# NO_RC4  - Define to build without the RC4 algorithm
-# NO_RC2  - Define to build without the RC2 algorithm
-# THREADS - Define when building with threads, you will probably also need any
-#           system defines as well, i.e. _REENTERANT for Solaris 2.[34]
-# TERMIO  - Define the termio terminal subsystem, needed if sgtty is missing.
-# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
-# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
-# DEVRANDOM - Give this the value of the 'random device' if your OS supports
-#           one.  32 bytes will be read from this when the random
-#           number generator is initalised.
-# SSL_FORBID_ENULL - define if you want the server to be not able to use the
-#           NULL encryption ciphers.
-#
-# LOCK_DEBUG - turns on lots of lock debug output :-)
-# REF_CHECK - turn on some xyz_free() assertions.
-# REF_PRINT - prints some stuff on structure free.
-# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
-# MFUNC - Make all Malloc/Free/Realloc calls call
-#       CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
-#       call application defined callbacks via CRYPTO_set_mem_functions()
-# MD5_ASM needs to be defined to use the x86 assembler for MD5
-# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
-# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
-# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8.  It must
-# equal 4.
-# PKCS1_CHECK - pkcs1 tests.
-
-CC= cc
-CFLAG= -O
-DEPFLAG= 
-PEX_LIBS= 
-EX_LIBS= 
-EXE_EXT= 
-ARFLAGS=
-AR=ar $(ARFLAGS) r
-RANLIB= ranlib
-NM= nm
-PERL= perl
-TAR= tar
-TARFLAGS= --no-recursion
-MAKEDEPPROG=makedepend
-LIBDIR=lib
-
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-#AS=$(CC) -c
-ASFLAG=$(CFLAG)
-
-# For x86 assembler: Set PROCESSOR to 386 if you want to support
-# the 80386.
-PROCESSOR=
-
-# CPUID module collects small commonly used assembler snippets
-CPUID_OBJ= 
-BN_ASM= bn_asm.o
-DES_ENC= des_enc.o fcrypt_b.o
-AES_ENC= aes_core.o aes_cbc.o
-BF_ENC= bf_enc.o
-CAST_ENC= c_enc.o
-RC4_ENC= rc4_enc.o
-RC5_ENC= rc5_enc.o
-MD5_ASM_OBJ= 
-SHA1_ASM_OBJ= 
-RMD160_ASM_OBJ= 
-WP_ASM_OBJ=
-CMLL_ENC=
-MODES_ASM_OBJ=
-PERLASM_SCHEME=
-
-# KRB5 stuff
-KRB5_INCLUDES=
-LIBKRB5=
-
-# Zlib stuff
-ZLIB_INCLUDE=
-LIBZLIB=
-
-# This is the location of fipscanister.o and friends.
-# The FIPS module build will place it $(INSTALLTOP)/lib
-# but since $(INSTALLTOP) can only take the default value
-# when the module is built it will be in /usr/local/ssl/lib
-# $(INSTALLTOP) for this build may be different so hard
-# code the path.
-
-FIPSLIBDIR=/usr/local/ssl/$(LIBDIR)/
-
-# This is set to "y" if fipscanister.o is compiled internally as
-# opposed to coming from an external validated location.
-
-FIPSCANISTERINTERNAL=n
-
-# This is set if we only build fipscanister.o
-
-FIPSCANISTERONLY=y
-
-# The location of the library which contains fipscanister.o
-# normally it will be libcrypto unless fipsdso is set in which
-# case it will be libfips. If not compiling in FIPS mode at all
-# this is empty making it a useful test for a FIPS compile.
-
-FIPSCANLIB=
-
-# Shared library base address. Currently only used on Windows.
-#
-
-BASEADDR=
-
-DIRS=   crypto fips test 
-ENGDIRS= ccgost
-SHLIBDIRS= crypto 
-
-# dirs in crypto to build
-SDIRS=  \
-	sha hmac des aes modes \
-	bn ec rsa dsa ecdsa dh \
-	buffer evp ecdh cmac
-# keep in mind that the above list is adjusted by ./Configure
-# according to no-xxx arguments...
-
-LINKDIRS=  \
-	objects sha hmac des aes modes \
-	bn ec rsa dsa ecdh cmac ecdsa dh engine \
-	buffer bio stack lhash rand err \
-	evp asn1 ui
-
-# tests to perform.  "alltests" is a special word indicating that all tests
-# should be performed.
-TESTS = alltests
-
-MAKEFILE= Makefile
-
-MANDIR=$(OPENSSLDIR)/man
-MAN1=1
-MAN3=3
-MANSUFFIX=
-HTMLSUFFIX=html
-HTMLDIR=$(OPENSSLDIR)/html
-SHELL=/bin/sh
-
-TOP=    .
-ONEDIRS=out tmp
-EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
-WDIRS=  windows
-LIBS=   
-SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
-SHARED_SSL=libssl$(SHLIB_EXT)
-SHARED_LIBS=
-SHARED_LIBS_LINK_EXTS=
-SHARED_LDFLAGS=
-
-GENERAL=        Makefile
-BASENAME=       openssl
-NAME=           $(BASENAME)-$(VERSION)
-TARFILE=        openssl-fips-2.0.tar
-WTARFILE=       $(NAME)-win.tar
-EXHEADER=       e_os2.h
-HEADER=         e_os.h
-
-all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
-
-# as we stick to -e, CLEARENV ensures that local variables in lower
-# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
-# shell, which [annoyingly enough] terminates unset with error if VAR
-# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
-# which terminates unset with error if no variable was present:-(
-CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
-		$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}	\
-		$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}		\
-		$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL}	\
-		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
-		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
-		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
-		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS}		\
-		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
-		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
-
-BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
-		CC='$(CC)' CFLAG='$(CFLAG)' 			\
-		ASFLAG='$(CFLAG) -c'			\
-		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
-		CROSS_COMPILE='$(CROSS_COMPILE)'	\
-		PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'		\
-		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
-		INSTALL_PREFIX='$(INSTALL_PREFIX)'		\
-		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
-		LIBDIR='$(LIBDIR)'				\
-		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
-		DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'	\
-		MAKEDEPPROG='$(MAKEDEPPROG)'			\
-		SHARED_LDFLAGS='$(SHARED_LDFLAGS)'		\
-		KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'	\
-		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
-		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
-		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
-		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
-		CPUID_OBJ='$(CPUID_OBJ)'			\
-		BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' 	\
-		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
-		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
-		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
-		SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'			\
-		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
-		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
-		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
-		MODES_ASM_OBJ='$(MODES_ASM_OBJ)'		\
-		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
-		FIPSLIBDIR='${FIPSLIBDIR}'			\
-		FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"	\
-		FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}'	\
-		FIPSCANISTERONLY='${FIPSCANISTERONLY}'	\
-		FIPS_EX_OBJ='${FIPS_EX_OBJ}'	\
-		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
-# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
-# which in turn eliminates ambiguities in variable treatment with -e.
-
-# BUILD_CMD is a generic macro to build a given target in a given
-# subdirectory.  The target must be given through the shell variable
-# `target' and the subdirectory to build in must be given through `dir'.
-# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
-# BUILD_ONE_CMD instead.
-#
-# BUILD_ONE_CMD is a macro to build a given target in a given
-# subdirectory if that subdirectory is part of $(DIRS).  It requires
-# exactly the same shell variables as BUILD_CMD.
-#
-# RECURSIVE_BUILD_CMD is a macro to build a given target in all
-# subdirectories defined in $(DIRS).  It requires that the target
-# is given through the shell variable `target'.
-BUILD_CMD=  if [ -d "$$dir" ]; then \
-	    (	cd $$dir && echo "making $$target in $$dir..." && \
-		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
-	    ) || exit 1; \
-	    fi
-RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
-BUILD_ONE_CMD=\
-	if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
-		$(BUILD_CMD); \
-	fi
-
-reflect:
-	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
-
-FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
-	../crypto/aes/aes_ecb.o \
-	../crypto/aes/aes_ofb.o \
-	../crypto/bn/bn_add.o \
-	../crypto/bn/bn_blind.o \
-	../crypto/bn/bn_ctx.o \
-	../crypto/bn/bn_div.o \
-	../crypto/bn/bn_exp2.o \
-	../crypto/bn/bn_exp.o \
-	../crypto/bn/bn_gcd.o \
-	../crypto/bn/bn_gf2m.o \
-	../crypto/bn/bn_lib.o \
-	../crypto/bn/bn_mod.o \
-	../crypto/bn/bn_mont.o \
-	../crypto/bn/bn_mul.o \
-	../crypto/bn/bn_nist.o \
-	../crypto/bn/bn_prime.o \
-	../crypto/bn/bn_rand.o \
-	../crypto/bn/bn_recp.o \
-	../crypto/bn/bn_shift.o \
-	../crypto/bn/bn_sqr.o \
-	../crypto/bn/bn_word.o \
-	../crypto/bn/bn_x931p.o \
-	../crypto/buffer/buf_str.o \
-	../crypto/cmac/cmac.o \
-	../crypto/cryptlib.o \
-	../crypto/des/cfb64ede.o \
-	../crypto/des/cfb64enc.o \
-	../crypto/des/cfb_enc.o \
-	../crypto/des/ecb3_enc.o \
-	../crypto/des/ofb64ede.o \
-	../crypto/des/fcrypt.o \
-	../crypto/des/set_key.o \
-	../crypto/dh/dh_check.o \
-	../crypto/dh/dh_gen.o \
-	../crypto/dh/dh_key.o \
-	../crypto/dsa/dsa_gen.o \
-	../crypto/dsa/dsa_key.o \
-	../crypto/dsa/dsa_ossl.o \
-	../crypto/ec/ec_curve.o \
-	../crypto/ec/ec_cvt.o \
-	../crypto/ec/ec_key.o \
-	../crypto/ec/ec_lib.o \
-	../crypto/ec/ecp_mont.o \
-	../crypto/ec/ec_mult.o \
-	../crypto/ec/ecp_nist.o \
-	../crypto/ec/ecp_smpl.o \
-	../crypto/ec/ec2_mult.o \
-	../crypto/ec/ec2_smpl.o \
-	../crypto/ecdh/ech_key.o \
-	../crypto/ecdh/ech_ossl.o \
-	../crypto/ecdsa/ecs_ossl.o \
-	../crypto/evp/e_aes.o \
-	../crypto/evp/e_des3.o \
-	../crypto/evp/e_null.o \
-	../crypto/evp/m_sha1.o \
-	../crypto/evp/m_dss1.o \
-	../crypto/evp/m_dss.o \
-	../crypto/evp/m_ecdsa.o \
-	../crypto/hmac/hmac.o \
-	../crypto/modes/cbc128.o \
-	../crypto/modes/ccm128.o \
-	../crypto/modes/cfb128.o \
-	../crypto/modes/ctr128.o \
-	../crypto/modes/gcm128.o \
-	../crypto/modes/ofb128.o \
-	../crypto/modes/xts128.o \
-	../crypto/rsa/rsa_eay.o \
-	../crypto/rsa/rsa_gen.o \
-	../crypto/rsa/rsa_crpt.o \
-	../crypto/rsa/rsa_none.o \
-	../crypto/rsa/rsa_oaep.o \
-	../crypto/rsa/rsa_pk1.o \
-	../crypto/rsa/rsa_pss.o \
-	../crypto/rsa/rsa_ssl.o \
-	../crypto/rsa/rsa_x931.o \
-	../crypto/rsa/rsa_x931g.o \
-	../crypto/sha/sha1dgst.o \
-	../crypto/sha/sha256.o \
-	../crypto/sha/sha512.o \
-	../crypto/thr_id.o \
-	../crypto/uid.o
-
-sub_all: build_all
-build_all: build_libs
-
-build_libs: build_crypto build_fips
-
-build_fips:
-	@dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
-
-build_crypto:
-	if [ -n "$(FIPSCANLIB)" ]; then \
-		EXCL_OBJ='$(AES_ENC) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(MODES_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
-		ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
-	else \
-		ARX='${AR}' ; \
-	fi ; export ARX ; \
-	if [ $(FIPSCANISTERINTERNAL) = "y" ]; then \
-		AS='$(PERL) $${TOP}/util/fipsas.pl $${TOP} $${<} $(CC)' ; \
-	else \
-		AS='$(CC) -c' ; \
-	fi ; export AS ; \
-		dir=crypto; target=fips; $(BUILD_ONE_CMD)
-build_ssl:
-	@dir=ssl; target=all; $(BUILD_ONE_CMD)
-build_engines:
-	@dir=engines; target=all; $(BUILD_ONE_CMD)
-build_apps:
-	@dir=apps; target=all; $(BUILD_ONE_CMD)
-build_tests:
-	@dir=test; target=fipsexe; $(BUILD_ONE_CMD)
-build_algvs:
-	@dir=test; target=fipsalgvs; $(BUILD_ONE_CMD)
-build_tools:
-	@dir=tools; target=all; $(BUILD_ONE_CMD)
-
-all_testapps: build_libs build_testapps
-build_testapps:
-	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
-
-libcrypto$(SHLIB_EXT): libcrypto.a build_fips
-	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
-			FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
-			export CC FIPSLD_CC; \
-		fi; \
-		$(MAKE) SHLIBDIRS=crypto build-shared; \
-	else \
-		echo "There's no support for shared libraries on this platform" >&2; \
-		exit 1; \
-	fi
-
-libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
-	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
-	else \
-		echo "There's no support for shared libraries on this platform" >&2; \
-		exit 1; \
-	fi
-
-clean-shared:
-	@set -e; for i in $(SHLIBDIRS); do \
-		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
-			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
-			for j in $${tmp:-x}; do \
-				( set -x; rm -f lib$$i$$j ); \
-			done; \
-		fi; \
-		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
-		if [ "$(PLATFORM)" = "Cygwin" ]; then \
-			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
-		fi; \
-	done
-
-link-shared:
-	@ set -e; for i in $(SHLIBDIRS); do \
-		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
-			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
-			symlink.$(SHLIB_TARGET); \
-		libs="$$libs -l$$i"; \
-	done
-
-build-shared: do_$(SHLIB_TARGET) link-shared
-
-do_$(SHLIB_TARGET):
-	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
-		if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
-			libs="$(LIBKRB5) $$libs"; \
-		fi; \
-		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
-			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
-			LIBDEPS="$$libs $(EX_LIBS)" \
-			link_a.$(SHLIB_TARGET); \
-		libs="-l$$i $$libs"; \
-	done
-
-libcrypto.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL-libcrypto'; \
-	    echo 'Description: OpenSSL cryptography library'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
-
-libssl.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL'; \
-	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
-
-openssl.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL'; \
-	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
-
-Makefile: Makefile.fips Configure config
-	@echo "Makefile is older than Makefile.org, Configure or config."
-	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
-	@false
-
-libclean:
-	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
-
-clean:	libclean
-	rm -f shlib/*.o *.o core a.out fluff testlog make.log cctest cctest.c
-	@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
-	rm -f $(LIBS)
-	rm -f openssl.pc libssl.pc libcrypto.pc
-	rm -f speed.* .pure
-	rm -f $(TARFILE)
-	@set -e; for i in $(ONEDIRS) ;\
-	do \
-	rm -fr $$i/*; \
-	done
-
-makefile.one: files
-	$(PERL) util/mk1mf.pl >makefile.one; \
-	sh util/do_ms.sh
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
-	@set -e; target=files; $(RECURSIVE_BUILD_CMD)
-
-links:
-	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
-	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
-	@set -e; dir=fips target=links; $(BUILD_ONE_CMD)
-	@(cd crypto ; TEST='' SDIRS='$(LINKDIRS)' $(MAKE) -e links)
-
-gentests:
-	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
-
-dclean:
-	rm -rf *.bak include/openssl certs/.0
-	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
-
-test:   tests
-
-tests:
-	@echo "Not implemented in FIPS build" ; false
-
-report:
-	@$(PERL) util/selftest.pl
-
-depend:
-	@echo make depend not supported ; false
-
-lint:
-	@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
-
-tags:
-	rm -f TAGS
-	find . -name '[^.]*.[ch]' | xargs etags -a
-
-errors:
-	$(PERL) util/mkerr.pl -recurse -write
-	(cd engines; $(MAKE) PERL=$(PERL) errors)
-	$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
-
-stacks:
-	$(PERL) util/mkstack.pl -write
-
-util/libeay.num::
-	$(PERL) util/mkdef.pl crypto update
-
-util/ssleay.num::
-	$(PERL) util/mkdef.pl ssl update
-
-crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
-	$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
-crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
-	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
-crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
-	$(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
-
-apps/openssl-vms.cnf: apps/openssl.cnf
-	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
-
-crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
-	$(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
-
-
-TABLE: Configure
-	(echo 'Output of `Configure TABLE'"':"; \
-	$(PERL) Configure TABLE) > TABLE
-
-update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
-
-# Build distribution tar-file. As the list of files returned by "find" is
-# pretty long, on several platforms a "too many arguments" error or similar
-# would occur. Therefore the list of files is temporarily stored into a file
-# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
-# tar does not support the --files-from option.
-tar:
-	find . -type d -print | xargs chmod 755
-	find . -type f -print | xargs chmod a+r
-	find . -type f -perm -0100 -print | xargs chmod a+x
-	find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | $(BUILDENV) LINKDIRS='$(LINKDIRS)' $(PERL) util/fipsdist.pl | sort > ../$(TARFILE).list; \
-	$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
-	tardy --user_number=0  --user_name=openssl \
-	      --group_number=0 --group_name=openssl \
-	      --prefix=openssl-$(VERSION) - |\
-	gzip --best >../$(TARFILE).gz; \
-	rm -f ../$(TARFILE).list; \
-	ls -l ../$(TARFILE).gz
-
-tar-snap:
-	@$(TAR) $(TARFLAGS) -cvf - \
-		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
-	tardy --user_number=0  --user_name=openssl \
-	      --group_number=0 --group_name=openssl \
-	      --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
-	ls -l ../$(TARFILE)
-
-dist:   
-	$(PERL) Configure dist fipscanisteronly
-	@$(MAKE) dist_pem_h
-	@$(MAKE) SDIRS='$(SDIRS)' clean
-	@$(MAKE) -f Makefile.fips TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
-
-dist_pem_h:
-	(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
-
-install: all install_sw
-
-install_sw:
-	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl
-	@set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
-	do \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.

Makefile.org

@@ -15,11 +15,6 @@ OPTIONS=
 CONFIGURE_ARGS=
 SHLIB_TARGET=
 
-# HERE indicates where this Makefile lives.  This can be used to indicate
-# where sub-Makefiles are expected to be.  Currently has very limited usage,
-# and should probably not be bothered with at all.
-HERE=.
-
 # INSTALL_PREFIX is for package builders so that they can configure
 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
 # Normally it is left empty.
@@ -57,8 +52,9 @@ OPENSSLDIR=/usr/local/ssl
 # equal 4.
 # PKCS1_CHECK - pkcs1 tests.
 
-CC= cc
-CFLAG= -O
+CC= gcc
+#CFLAG= -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
+CFLAG= -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
 DEPFLAG= 
 PEX_LIBS= 
 EX_LIBS= 
@@ -66,105 +62,122 @@ EXE_EXT=
 ARFLAGS=
 AR=ar $(ARFLAGS) r
 RANLIB= ranlib
-NM= nm
 PERL= perl
 TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend
-LIBDIR=lib
 
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-#AS=$(CC) -c
-ASFLAG=$(CFLAG)
+# Set BN_ASM to bn_asm.o if you want to use the C version
+BN_ASM= bn_asm.o
+#BN_ASM= bn_asm.o
+#BN_ASM= asm/bn86-elf.o	# elf, linux-elf
+#BN_ASM= asm/bn86-sol.o # solaris
+#BN_ASM= asm/bn86-out.o # a.out, FreeBSD
+#BN_ASM= asm/bn86bsdi.o # bsdi
+#BN_ASM= asm/alpha.o    # DEC Alpha
+#BN_ASM= asm/pa-risc2.o # HP-UX PA-RISC
+#BN_ASM= asm/r3000.o    # SGI MIPS cpu
+#BN_ASM= asm/sparc.o    # Sun solaris/SunOS
+#BN_ASM= asm/bn-win32.o # Windows 95/NT
+#BN_ASM= asm/x86w16.o   # 16 bit code for Windows 3.1/DOS
+#BN_ASM= asm/x86w32.o   # 32 bit code for Windows 3.1
 
 # For x86 assembler: Set PROCESSOR to 386 if you want to support
 # the 80386.
 PROCESSOR=
 
-# CPUID module collects small commonly used assembler snippets
-CPUID_OBJ= 
-BN_ASM= bn_asm.o
-DES_ENC= des_enc.o fcrypt_b.o
-AES_ENC= aes_core.o aes_cbc.o
-BF_ENC= bf_enc.o
-CAST_ENC= c_enc.o
-RC4_ENC= rc4_enc.o
-RC5_ENC= rc5_enc.o
-MD5_ASM_OBJ= 
-SHA1_ASM_OBJ= 
-RMD160_ASM_OBJ= 
-WP_ASM_OBJ=
-CMLL_ENC=
-MODES_ASM_OBJ=
-ENGINES_ASM_OBJ=
-PERLASM_SCHEME=
+# Set DES_ENC to des_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+DES_ENC= asm/dx86-out.o asm/yx86-out.o
+#DES_ENC= des_enc.o fcrypt_b.o          # C
+#DES_ENC= asm/dx86-elf.o asm/yx86-elf.o # elf
+#DES_ENC= asm/dx86-sol.o asm/yx86-sol.o # solaris
+#DES_ENC= asm/dx86-out.o asm/yx86-out.o # a.out, FreeBSD
+#DES_ENC= asm/dx86bsdi.o asm/yx86bsdi.o # bsdi
+
+# Set BF_ENC to bf_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+BF_ENC= asm/bx86-out.o
+#BF_ENC= bf_enc.o
+#BF_ENC= asm/bx86-elf.o # elf
+#BF_ENC= asm/bx86-sol.o # solaris
+#BF_ENC= asm/bx86-out.o # a.out, FreeBSD
+#BF_ENC= asm/bx86bsdi.o # bsdi
+
+# Set CAST_ENC to c_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+CAST_ENC= asm/cx86-out.o
+#CAST_ENC= c_enc.o
+#CAST_ENC= asm/cx86-elf.o # elf
+#CAST_ENC= asm/cx86-sol.o # solaris
+#CAST_ENC= asm/cx86-out.o # a.out, FreeBSD
+#CAST_ENC= asm/cx86bsdi.o # bsdi
+
+# Set RC4_ENC to rc4_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+RC4_ENC= asm/rx86-out.o
+#RC4_ENC= rc4_enc.o
+#RC4_ENC= asm/rx86-elf.o # elf
+#RC4_ENC= asm/rx86-sol.o # solaris
+#RC4_ENC= asm/rx86-out.o # a.out, FreeBSD
+#RC4_ENC= asm/rx86bsdi.o # bsdi
+
+# Set RC5_ENC to rc5_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+RC5_ENC= asm/r586-out.o
+#RC5_ENC= rc5_enc.o
+#RC5_ENC= asm/r586-elf.o # elf
+#RC5_ENC= asm/r586-sol.o # solaris
+#RC5_ENC= asm/r586-out.o # a.out, FreeBSD
+#RC5_ENC= asm/r586bsdi.o # bsdi
+
+# Also need MD5_ASM defined
+MD5_ASM_OBJ= asm/mx86-out.o
+#MD5_ASM_OBJ= asm/mx86-elf.o        # elf
+#MD5_ASM_OBJ= asm/mx86-sol.o        # solaris
+#MD5_ASM_OBJ= asm/mx86-out.o        # a.out, FreeBSD
+#MD5_ASM_OBJ= asm/mx86bsdi.o        # bsdi
+
+# Also need SHA1_ASM defined
+SHA1_ASM_OBJ= asm/sx86-out.o
+#SHA1_ASM_OBJ= asm/sx86-elf.o       # elf
+#SHA1_ASM_OBJ= asm/sx86-sol.o       # solaris
+#SHA1_ASM_OBJ= asm/sx86-out.o       # a.out, FreeBSD
+#SHA1_ASM_OBJ= asm/sx86bsdi.o       # bsdi
+
+# Also need RMD160_ASM defined
+RMD160_ASM_OBJ= asm/rm86-out.o
+#RMD160_ASM_OBJ= asm/rm86-elf.o       # elf
+#RMD160_ASM_OBJ= asm/rm86-sol.o       # solaris
+#RMD160_ASM_OBJ= asm/rm86-out.o       # a.out, FreeBSD
+#RMD160_ASM_OBJ= asm/rm86bsdi.o       # bsdi
 
 # KRB5 stuff
 KRB5_INCLUDES=
 LIBKRB5=
 
-# Zlib stuff
-ZLIB_INCLUDE=
-LIBZLIB=
-
-# This is the location of fipscanister.o and friends.
-# The FIPS module build will place it $(INSTALLTOP)/lib
-# but since $(INSTALLTOP) can only take the default value
-# when the module is built it will be in /usr/local/ssl/lib
-# $(INSTALLTOP) for this build may be different so hard
-# code the path.
-
-FIPSLIBDIR=/usr/local/ssl/$(LIBDIR)/
-
-# This is set to "y" if fipscanister.o is compiled internally as
-# opposed to coming from an external validated location.
-
-FIPSCANISTERINTERNAL=n
-
-# The location of the library which contains fipscanister.o
-# normally it will be libcrypto unless fipsdso is set in which
-# case it will be libfips. If not compiling in FIPS mode at all
-# this is empty making it a useful test for a FIPS compile.
-
-FIPSCANLIB=
-
-# Shared library base address. Currently only used on Windows.
-#
-
-BASEADDR=
-
-DIRS=   crypto fips ssl engines apps test tools
-ENGDIRS= ccgost
+DIRS=   crypto ssl engines apps test tools
 SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
 SDIRS=  \
-	objects \
-	md2 md4 md5 sha mdc2 hmac ripemd whrlpool \
-	des aes rc2 rc4 rc5 idea bf cast camellia seed modes \
-	bn ec rsa dsa ecdsa dh ecdh dso engine \
-	buffer bio stack lhash rand err \
-	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-	cms pqueue ts jpake srp store cmac
-# keep in mind that the above list is adjusted by ./Configure
-# according to no-xxx arguments...
+	md2 md4 md5 sha mdc2 hmac ripemd \
+	des rc2 rc4 rc5 idea bf cast \
+	bn ec rsa dsa ecdsa dh ecdh dso engine aes \
+	buffer bio stack lhash rand err objects \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5
 
 # tests to perform.  "alltests" is a special word indicating that all tests
 # should be performed.
 TESTS = alltests
 
-MAKEFILE= Makefile
+MAKEFILE= Makefile.ssl
+NEWMAKE=  make
+MAKE=     $(NEWMAKE) -f Makefile.ssl
 
 MANDIR=$(OPENSSLDIR)/man
 MAN1=1
 MAN3=3
-MANSUFFIX=
-HTMLSUFFIX=html
-HTMLDIR=$(OPENSSLDIR)/html
 SHELL=/bin/sh
 
 TOP=    .
@@ -186,219 +199,39 @@ WTARFILE=       $(NAME)-win.tar
 EXHEADER=       e_os2.h
 HEADER=         e_os.h
 
-all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
+all: Makefile.ssl build_all openssl.pc
 
-# as we stick to -e, CLEARENV ensures that local variables in lower
-# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
-# shell, which [annoyingly enough] terminates unset with error if VAR
-# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
-# which terminates unset with error if no variable was present:-(
-CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
-		$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}	\
-		$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}		\
-		$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL}	\
-		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
-		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
-		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
-		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS}		\
-		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
-		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
-
-BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
-		CC='$(CC)' CFLAG='$(CFLAG)' 			\
-		ASFLAG='$(CFLAG) -c'			\
-		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
-		CROSS_COMPILE='$(CROSS_COMPILE)'	\
-		PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'		\
-		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
-		INSTALL_PREFIX='$(INSTALL_PREFIX)'		\
-		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
-		LIBDIR='$(LIBDIR)'				\
-		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
-		DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'	\
-		MAKEDEPPROG='$(MAKEDEPPROG)'			\
-		SHARED_LDFLAGS='$(SHARED_LDFLAGS)'		\
-		KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'	\
-		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
-		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
-		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
-		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
-		CPUID_OBJ='$(CPUID_OBJ)'			\
-		BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' 	\
-		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
-		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
-		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
-		SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'			\
-		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
-		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
-		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
-		MODES_ASM_OBJ='$(MODES_ASM_OBJ)'		\
-		ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)'		\
-		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
-		FIPSLIBDIR='${FIPSLIBDIR}'			\
-		FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"	\
-		FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}'	\
-		FIPS_EX_OBJ='${FIPS_EX_OBJ}'	\
-		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
-# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
-# which in turn eliminates ambiguities in variable treatment with -e.
-
-# BUILD_CMD is a generic macro to build a given target in a given
-# subdirectory.  The target must be given through the shell variable
-# `target' and the subdirectory to build in must be given through `dir'.
-# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
-# BUILD_ONE_CMD instead.
-#
-# BUILD_ONE_CMD is a macro to build a given target in a given
-# subdirectory if that subdirectory is part of $(DIRS).  It requires
-# exactly the same shell variables as BUILD_CMD.
-#
-# RECURSIVE_BUILD_CMD is a macro to build a given target in all
-# subdirectories defined in $(DIRS).  It requires that the target
-# is given through the shell variable `target'.
-BUILD_CMD=  if [ -d "$$dir" ]; then \
-	    (	cd $$dir && echo "making $$target in $$dir..." && \
-		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
-	    ) || exit 1; \
-	    fi
-RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
-BUILD_ONE_CMD=\
-	if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
-		$(BUILD_CMD); \
-	fi
-
-reflect:
-	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
-
-FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
-	../crypto/aes/aes_ecb.o \
-	../crypto/aes/aes_ofb.o \
-	../crypto/bn/bn_add.o \
-	../crypto/bn/bn_blind.o \
-	../crypto/bn/bn_ctx.o \
-	../crypto/bn/bn_div.o \
-	../crypto/bn/bn_exp2.o \
-	../crypto/bn/bn_exp.o \
-	../crypto/bn/bn_gcd.o \
-	../crypto/bn/bn_gf2m.o \
-	../crypto/bn/bn_lib.o \
-	../crypto/bn/bn_mod.o \
-	../crypto/bn/bn_mont.o \
-	../crypto/bn/bn_mul.o \
-	../crypto/bn/bn_nist.o \
-	../crypto/bn/bn_prime.o \
-	../crypto/bn/bn_rand.o \
-	../crypto/bn/bn_recp.o \
-	../crypto/bn/bn_shift.o \
-	../crypto/bn/bn_sqr.o \
-	../crypto/bn/bn_word.o \
-	../crypto/bn/bn_x931p.o \
-	../crypto/buffer/buf_str.o \
-	../crypto/cmac/cmac.o \
-	../crypto/cryptlib.o \
-	../crypto/des/cfb64ede.o \
-	../crypto/des/cfb64enc.o \
-	../crypto/des/cfb_enc.o \
-	../crypto/des/ecb3_enc.o \
-	../crypto/des/ofb64ede.o \
-	../crypto/des/fcrypt.o \
-	../crypto/des/set_key.o \
-	../crypto/dh/dh_check.o \
-	../crypto/dh/dh_gen.o \
-	../crypto/dh/dh_key.o \
-	../crypto/dsa/dsa_gen.o \
-	../crypto/dsa/dsa_key.o \
-	../crypto/dsa/dsa_ossl.o \
-	../crypto/ec/ec_curve.o \
-	../crypto/ec/ec_cvt.o \
-	../crypto/ec/ec_key.o \
-	../crypto/ec/ec_lib.o \
-	../crypto/ec/ecp_mont.o \
-	../crypto/ec/ec_mult.o \
-	../crypto/ec/ecp_nist.o \
-	../crypto/ec/ecp_smpl.o \
-	../crypto/ec/ec2_mult.o \
-	../crypto/ec/ec2_smpl.o \
-	../crypto/ecdh/ech_key.o \
-	../crypto/ecdh/ech_ossl.o \
-	../crypto/ecdsa/ecs_ossl.o \
-	../crypto/evp/e_aes.o \
-	../crypto/evp/e_des3.o \
-	../crypto/evp/e_null.o \
-	../crypto/evp/m_sha1.o \
-	../crypto/evp/m_dss1.o \
-	../crypto/evp/m_dss.o \
-	../crypto/evp/m_ecdsa.o \
-	../crypto/hmac/hmac.o \
-	../crypto/modes/cbc128.o \
-	../crypto/modes/ccm128.o \
-	../crypto/modes/cfb128.o \
-	../crypto/modes/ctr128.o \
-	../crypto/modes/gcm128.o \
-	../crypto/modes/ofb128.o \
-	../crypto/modes/xts128.o \
-	../crypto/rsa/rsa_eay.o \
-	../crypto/rsa/rsa_gen.o \
-	../crypto/rsa/rsa_crpt.o \
-	../crypto/rsa/rsa_none.o \
-	../crypto/rsa/rsa_oaep.o \
-	../crypto/rsa/rsa_pk1.o \
-	../crypto/rsa/rsa_pss.o \
-	../crypto/rsa/rsa_ssl.o \
-	../crypto/rsa/rsa_x931.o \
-	../crypto/rsa/rsa_x931g.o \
-	../crypto/sha/sha1dgst.o \
-	../crypto/sha/sha256.o \
-	../crypto/sha/sha512.o \
-	../crypto/thr_id.o \
-	../crypto/uid.o
+BUILD_CMD=if echo " $(DIRS) " | grep " $$i " >/dev/null 2>/dev/null; then \
+	if [ -d "$$i" ]; then \
+		(cd $$i && echo "making all in $$i..." && \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
+	else \
+		$(MAKE) $$i; \
+	fi; fi
 
 sub_all: build_all
 build_all: build_libs build_apps build_tests build_tools
 
-build_libs: build_crypto build_fips build_ssl build_engines
-
-build_fips:
-	@dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
+build_libs: build_crypto build_ssl build_engines
 
 build_crypto:
-	if [ -n "$(FIPSCANLIB)" ]; then \
-		EXCL_OBJ='$(AES_ENC) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(MODES_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
-		ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
-	else \
-		ARX='${AR}' ; \
-	fi ; export ARX ; \
-	if [ $(FIPSCANISTERINTERNAL) = "y" ]; then \
-		AS='$(PERL) $${TOP}/util/fipsas.pl $${TOP} $${<} $(CC) -c' ; \
-	else \
-		AS='$(CC) -c' ; \
-	fi ; export AS ; \
-		dir=crypto; target=all; $(BUILD_ONE_CMD)
+	@i=crypto; $(BUILD_CMD)
 build_ssl:
-	@dir=ssl; target=all; $(BUILD_ONE_CMD)
+	@i=ssl; $(BUILD_CMD)
 build_engines:
-	@dir=engines; target=all; AS='$(CC) -c'; export AS; $(BUILD_ONE_CMD)
+	@i=engines; $(BUILD_CMD)
 build_apps:
-	@dir=apps; target=all; $(BUILD_ONE_CMD)
+	@i=apps; $(BUILD_CMD)
 build_tests:
-	@dir=test; target=all; $(BUILD_ONE_CMD)
+	@i=test; $(BUILD_CMD)
 build_tools:
-	@dir=tools; target=all; $(BUILD_ONE_CMD)
+	@i=tools; $(BUILD_CMD)
 
-all_testapps: build_libs build_testapps
-build_testapps:
-	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
-
-libcrypto$(SHLIB_EXT): libcrypto.a build_fips
+libcrypto$(SHLIB_EXT): libcrypto.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
-			FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
-			export CC FIPSLD_CC; \
-		fi; \
-		$(MAKE) -e SHLIBDIRS=crypto build-shared; \
+		$(MAKE) SHLIBDIRS=crypto build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
-		exit 1; \
 	fi
 
 libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
@@ -406,11 +239,10 @@ libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
 		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
-		exit 1; \
 	fi
 
 clean-shared:
-	@set -e; for i in $(SHLIBDIRS); do \
+	@for i in $(SHLIBDIRS); do \
 		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
 			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
 			for j in $${tmp:-x}; do \
@@ -424,10 +256,10 @@ clean-shared:
 	done
 
 link-shared:
-	@ set -e; for i in $(SHLIBDIRS); do \
-		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
-			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
+	@ for i in ${SHLIBDIRS}; do \
+		$(NEWMAKE) -f Makefile.shared \
+			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
 			symlink.$(SHLIB_TARGET); \
 		libs="$$libs -l$$i"; \
 	done
@@ -435,48 +267,21 @@ link-shared:
 build-shared: do_$(SHLIB_TARGET) link-shared
 
 do_$(SHLIB_TARGET):
-	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
-		if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
-			libs="$(LIBKRB5) $$libs"; \
-		fi; \
-		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
-			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
+	@ libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		$(NEWMAKE) -f Makefile.shared \
+			CC="$(CC)" LDFLAGS="$(LDFLAGS)" \
+			SHARED_LDFLAGS="$(SHARED_LDFLAGS)" \
+			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
 			LIBDEPS="$$libs $(EX_LIBS)" \
 			link_a.$(SHLIB_TARGET); \
-		libs="-l$$i $$libs"; \
+		libs="$$libs -l$$i"; \
 	done
 
-libcrypto.pc: Makefile
+openssl.pc:
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL-libcrypto'; \
-	    echo 'Description: OpenSSL cryptography library'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
-
-libssl.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL'; \
-	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
-
-openssl.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'libdir=$${exec_prefix}/lib'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL'; \
@@ -484,24 +289,30 @@ openssl.pc: Makefile
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
 	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
+	    echo 'Cflags: -I$${includedir}' ) > openssl.pc
 
-Makefile: Makefile.org Configure config
-	@echo "Makefile is older than Makefile.org, Configure or config."
+Makefile.ssl: Makefile.org
+	@echo "Makefile.ssl is older than Makefile.org."
 	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
 	@false
 
 libclean:
-	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
+	rm -f *.so *.so.* engines/*.so *.a */lib */*/lib
 
-clean:	libclean
-	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
-	@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
-	rm -f $(LIBS)
-	rm -f openssl.pc libssl.pc libcrypto.pc
-	rm -f speed.* .pure
+clean:
+	rm -f shlib/*.o *.o core a.out fluff *.map rehash.time testlog make.log cctest cctest.c
+	@for i in $(DIRS) ;\
+	do \
+	if [ -d "$$i" ]; then \
+		(cd $$i && echo "making clean in $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' clean ) || exit 1; \
+		rm -f $(LIBS); \
+	fi; \
+	done;
+	rm -f openssl.pc
+	rm -f *.a *.o speed.* *.map *.so .pure core
 	rm -f $(TARFILE)
-	@set -e; for i in $(ONEDIRS) ;\
+	@for i in $(ONEDIRS) ;\
 	do \
 	rm -fr $$i/*; \
 	done
@@ -511,60 +322,95 @@ makefile.one: files
 	sh util/do_ms.sh
 
 files:
-	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
-	@set -e; target=files; $(RECURSIVE_BUILD_CMD)
+	$(PERL) $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
+	@for i in $(DIRS) ;\
+	do \
+	if [ -d "$$i" ]; then \
+		(cd $$i && echo "making 'files' in $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' files ) || exit 1; \
+	fi; \
+	done;
 
 links:
+	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
-	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
-	@if [ -z "$(FIPSCANLIB)" ]; then \
-		set -e; target=links; dir=fips ; $(BUILD_CMD) ; \
-	fi
+	@for i in $(DIRS); do \
+	if [ -d "$$i" ]; then \
+		(cd $$i && echo "making links in $$i..." && \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' links ) || exit 1; \
+	fi; \
+	done;
 
 gentests:
 	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
+	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
 
 dclean:
-	rm -rf *.bak include/openssl certs/.0
-	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
+	rm -f *.bak
+	@for i in $(DIRS) ;\
+	do \
+	if [ -d "$$i" ]; then \
+		(cd $$i && echo "making dclean in $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' dclean ) || exit 1; \
+	fi; \
+	done;
 
 rehash: rehash.time
-rehash.time: certs apps
-	@if [ -z "$(CROSS_COMPILE)" ]; then \
-		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
-		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
-		OPENSSL_DEBUG_MEMORY=on; \
+rehash.time: certs
+	@(OPENSSL="`pwd`/apps/openssl"; OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
-		$(PERL) tools/c_rehash certs) && \
-		touch rehash.time; \
-	else :; fi
+		LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
+		if [ "$(PLATFORM)" = "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
+		elif [ "$(PLATFORM)" != "Cygwin" ];  then PATH="`pwd`:$$PATH"; fi; \
+		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
+		$(PERL) tools/c_rehash certs)
+	touch rehash.time
 
 test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
-	OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
+	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
+	@LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
+		if [ "$(PLATFORM)" = "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
+		elif [ "$(PLATFORM)" != "Cygwin" ];  then PATH="`pwd`:$$PATH"; fi; \
+		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
+		apps/openssl version -a
 
 report:
 	@$(PERL) util/selftest.pl
 
 depend:
-	@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
+	@for i in $(DIRS) ;\
+	do \
+	if [ -d "$$i" ]; then \
+		(cd $$i && echo "making dependencies $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ) || exit 1; \
+	fi; \
+	done;
 
 lint:
-	@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
+	@for i in $(DIRS) ;\
+	do \
+	if [ -d "$$i" ]; then \
+		(cd $$i && echo "making lint $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' lint ) || exit 1; \
+	fi; \
+	done;
 
 tags:
-	rm -f TAGS
-	find . -name '[^.]*.[ch]' | xargs etags -a
+	@for i in $(DIRS) ;\
+	do \
+	if [ -d "$$i" ]; then \
+		(cd $$i && echo "making tags $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' tags ) || exit 1; \
+	fi; \
+	done;
 
 errors:
 	$(PERL) util/mkerr.pl -recurse -write
 	(cd engines; $(MAKE) PERL=$(PERL) errors)
-	$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
 
 stacks:
 	$(PERL) util/mkstack.pl -write
@@ -579,21 +425,12 @@ crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
 	$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
 crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
 	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
-crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
-	$(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
-
-apps/openssl-vms.cnf: apps/openssl.cnf
-	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
-
-crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
-	$(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
-
 
 TABLE: Configure
 	(echo 'Output of `Configure TABLE'"':"; \
 	$(PERL) Configure TABLE) > TABLE
 
-update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
+update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h TABLE
 
 # Build distribution tar-file. As the list of files returned by "find" is
 # pretty long, on several platforms a "too many arguments" error or similar
@@ -624,107 +461,70 @@ tar-snap:
 dist:   
 	$(PERL) Configure dist
 	@$(MAKE) dist_pem_h
-	@$(MAKE) SDIRS='$(SDIRS)' clean
-	@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
+	@$(MAKE) SDIRS='${SDIRS}' clean
+	@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
 
 dist_pem_h:
-	(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
+	(cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean)
 
-install: all install_docs install_sw
-
-install_sw:
+install: all install_docs
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkginfo \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/engines \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
-		$(INSTALL_PREFIX)$(OPENSSLDIR)/private
-	@set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/private \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/lib
+	@for i in $(EXHEADER) ;\
 	do \
 	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 	done;
-	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
-	@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
+	@for i in $(DIRS) ;\
+	do \
+	if [ -d "$$i" ]; then \
+		(cd $$i; echo "installing $$i..."; \
+		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' install ); \
+	fi; \
+	done
+	@for i in $(LIBS) ;\
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
-			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
 		fi; \
 	done;
-	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
+	@if [ -n "$(SHARED_LIBS)" ]; then \
 		tmp="$(SHARED_LIBS)"; \
 		for i in $${tmp:-x}; \
 		do \
 			if [ -f "$$i" -o -f "$$i.a" ]; then \
 			(       echo installing $$i; \
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
-					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
+					c=`echo $$i | sed 's/^lib/cyg/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+					mv $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
+					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
 				fi ); \
-				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-				(	case $$i in \
-						*crypto*) i=libeay32.dll;; \
-						*ssl*)    i=ssleay32.dll;; \
-					esac; \
-					echo installing $$i; \
-	 				cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
-	 				chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
-	 				mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
-				fi; \
 			fi; \
 		done; \
 		(	here="`pwd`"; \
-			cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
-			$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
-		if [ "$(INSTALLTOP)" != "/usr" ]; then \
-			echo 'OpenSSL shared libraries have been installed in:'; \
-			echo '  $(INSTALLTOP)'; \
-			echo ''; \
-			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
-		fi; \
+			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+			$(NEWMAKE) -f $$here/Makefile link-shared ); \
 	fi
-	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
-	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
-	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
-
-install_html_docs:
-	here="`pwd`"; \
-	for subdir in apps crypto ssl; do \
-		mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
-		for i in doc/$$subdir/*.pod; do \
-			fn=`basename $$i .pod`; \
-			echo "installing html/$$fn.$(HTMLSUFFIX)"; \
-			cat $$i \
-			| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
-			| pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
-			| sed -r 's/<!DOCTYPE.*//g' \
-			> $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
-			$(PERL) util/extract-names.pl < $$i | \
-				grep -v $$filecase "^$$fn\$$" | \
-				(cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
-				 while read n; do \
-					PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
-				 done); \
-		done; \
-	done
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkginfo
 
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -732,45 +532,34 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man3 \
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
-	@pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
-	here="`pwd`"; \
-	filecase=; \
-	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
-		filecase=-i; \
-	fi; \
-	set -e; for i in doc/apps/*.pod; do \
+	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
+	for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
-		sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
-		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
+		echo "installing man$$sec/$$fn.$$sec"; \
 		(cd `$(PERL) util/dirname.pl $$i`; \
 		sh -c "$$pod2man \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(PERL) util/extract-names.pl < $$i | \
-			(grep -v $$filecase "^$$fn\$$"; true) | \
-			(grep -v "[	]"; true) | \
-			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
-			 while read n; do \
-				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
-			 done); \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$$sec; \
+		$(PERL) util/extract-names.pl < $$i | grep -v "^$$fn" | \
+			while read n; do \
+				util/point.sh $$fn.$$sec $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$n.$$sec; \
+			done; \
 	done; \
-	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+	for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
-		sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
-		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
+		echo "installing man$$sec/$$fn.$$sec"; \
 		(cd `$(PERL) util/dirname.pl $$i`; \
 		sh -c "$$pod2man \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(PERL) util/extract-names.pl < $$i | \
-			(grep -v $$filecase "^$$fn\$$"; true) | \
-			(grep -v "[	]"; true) | \
-			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
-			 while read n; do \
-				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
-			 done); \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$$sec; \
+		$(PERL) util/extract-names.pl < $$i | grep -v "^$$fn" | \
+			while read n; do \
+				util/point.sh $$fn.$$sec $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$n.$$sec; \
+			done; \
 	done
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.

Makefile.shared

@@ -7,35 +7,19 @@
 
 # CC contains the current compiler.  This one MUST be defined
 CC=cc
-CFLAGS=$(CFLAG)
-# LDFLAGS contains flags to be used when temporary object files (when building
-# shared libraries) are created, or when an application is linked.
-# SHARED_LDFLAGS contains flags to be used when the shared library is created.
+# LDFLAGS contains flags to be used when the temporary object file is
+# created.  SHARED_LDFLAGS contains flags to be used when the shared
+# library is created.
 LDFLAGS=
 SHARED_LDFLAGS=
 
-NM=nm
-
-# LIBNAME contains just the name of the library, without prefix ("lib"
+# LIBNAME contains just the name of thhe library, without prefix ("lib"
 # on Unix, "cyg" for certain forms under Cygwin...) or suffix (.a, .so,
-# .dll, ...).  This one MUST have a value when using this makefile to
-# build shared libraries.
+# .dll, ...).  This one MUST have a value when using this makefile.
 # For example, to build libfoo.so, you need to do the following:
 #LIBNAME=foo
 LIBNAME=
 
-# APPNAME contains just the name of the application, without suffix (""
-# on Unix, ".exe" on Windows, ...).  This one MUST have a value when using
-# this makefile to build applications.
-# For example, to build foo, you need to do the following:
-#APPNAME=foo
-APPNAME=
-
-# OBJECTS contains all the object files to link together into the application.
-# This must contain at least one object file.
-#OBJECTS=foo.o
-OBJECTS=
-
 # LIBEXTRAS contains extra modules to link together with the library.
 # For example, if a second library, say libbar.a needs to be linked into
 # libfoo.so, you need to do the following:
@@ -69,8 +53,8 @@ LIBDEPS=
 #------------------------------------------------------------------------------
 # The rest is private to this makefile.
 
-SET_X=:
-#SET_X=set -x
+#DEBUG=:
+DEBUG=set -x
 
 top:
 	echo "Trying to use this makefile interactively?  Don't."
@@ -80,7 +64,7 @@ CALC_VERSIONS=	\
 	if [ -n "$(LIBVERSION)$(LIBCOMPATVERSIONS)" ]; then \
 		prev=""; \
 		for v in `echo "$(LIBVERSION) $(LIBCOMPATVERSIONS)" | cut -d';' -f1`; do \
-			SHLIB_SOVER_NODOT=$$v; \
+			SHLIB_SOVER_NODOT=$$v \
 			SHLIB_SOVER=.$$v; \
 			if [ -n "$$prev" ]; then \
 				SHLIB_COMPAT="$$SHLIB_COMPAT .$$prev"; \
@@ -89,567 +73,512 @@ CALC_VERSIONS=	\
 		done; \
 	fi
 
-LINK_APP=	\
-  ( $(SET_X);   \
-    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
-    LDCMD="$${LDCMD:-$(CC)}"; LDFLAGS="$${LDFLAGS:-$(CFLAGS)}"; \
-    LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
-    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
-    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-    $${LDCMD} $${LDFLAGS} -o $${APPNAME:=$(APPNAME)} $(OBJECTS) $${LIBDEPS} )
-
 LINK_SO=	\
-  ( $(SET_X);   \
-    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
-    SHAREDCMD="$${SHAREDCMD:-$(CC)}"; \
-    SHAREDFLAGS="$${SHAREDFLAGS:-$(CFLAGS) $(SHARED_LDFLAGS)}"; \
-    LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
-    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
-    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-    $${SHAREDCMD} $${SHAREDFLAGS} \
-	-o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
-	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS \
-  ) && $(SYMLINK_SO)
-
+  ( $(DEBUG); \
+    nm -Pg $$SHOBJECTS | grep ' [BDT] ' | cut -f1 -d' ' > lib$(LIBNAME).exp; \
+    $$SHAREDCMD $(SHARED_LDFLAGS) $$SHAREDFLAGS -o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
+	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS ) && \
+  $(SYMLINK_SO); ( $(DEBUG); rm -f lib$(LIBNAME).exp )
 SYMLINK_SO=	\
 	if [ -n "$$INHIBIT_SYMLINKS" ]; then :; else \
 		prev=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
 		if [ -n "$$SHLIB_COMPAT" ]; then \
 			for x in $$SHLIB_COMPAT; do \
-				( $(SET_X); rm -f $$SHLIB$$x$$SHLIB_SUFFIX; \
+				( $(DEBUG); rm -f $$SHLIB$$x$$SHLIB_SUFFIX; \
 				  ln -s $$prev $$SHLIB$$x$$SHLIB_SUFFIX ); \
 				prev=$$SHLIB$$x$$SHLIB_SUFFIX; \
 			done; \
 		fi; \
 		if [ -n "$$SHLIB_SOVER" ]; then \
-			( $(SET_X); rm -f $$SHLIB$$SHLIB_SUFFIX; \
+			( $(DEBUG); rm -f $$SHLIB$$SHLIB_SUFFIX; \
 			  ln -s $$prev $$SHLIB$$SHLIB_SUFFIX ); \
 		fi; \
 	fi
 
 LINK_SO_A=	SHOBJECTS="lib$(LIBNAME).a $(LIBEXTRAS)"; $(LINK_SO)
 LINK_SO_O=	SHOBJECTS="$(LIBEXTRAS)"; $(LINK_SO)
-
 LINK_SO_A_VIA_O=	\
-  SHOBJECTS=lib$(LIBNAME).o; \
-  ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
-  ( $(SET_X); \
+  SHOBJECTS=lib$(LIBNAME).o ALL=$$ALLSYMSFLAGS ALLSYMSFLAGS= NOALLSYMSFLAGS=; \
+  ( $(DEBUG); \
     ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
-  $(LINK_SO) && rm -f lib$(LIBNAME).o
-
+  $(LINK_SO) && rm -f $(LIBNAME).o
 LINK_SO_A_UNPACKED=	\
   UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
-  (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && \
-  ([ -z "$(LIBEXTRAS)" ] || cp $(LIBEXTRAS) $$UNPACKDIR) && \
+  (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && cp $(LIBEXTRAS) $$UNPACKDIR && \
   SHOBJECTS=$$UNPACKDIR/*.o; \
   $(LINK_SO) && rm -rf $$UNPACKDIR
 
-DETECT_GNU_LD=($(CC) -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
-
-DO_GNU_SO=$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"
-
-DO_GNU_APP=LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"
-
-#This is rather special.  It's a special target with which one can link
-#applications without bothering with any features that have anything to
-#do with shared libraries, for example when linking against static
-#libraries.  It's mostly here to avoid a lot of conditionals everywhere
-#else...
-link_app.:
-	$(LINK_APP)
+DETECT_GNU_LD=${CC} -v 2>&1 | grep '^gcc' >/dev/null 2>&1 && \
+	my_ld=`${CC} -print-prog-name=ld 2>&1` && \
+	[ -n "$$my_ld" ] && \
+	$$my_ld -v 2>&1 | grep 'GNU ld' >/dev/null 2>&1
+DO_GNU=$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so \
+	SHLIB_SUFFIX= \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS='-Wl,--whole-archive' \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive' \
+	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX" \
+	SHAREDCMD='$(CC)'
 
 link_o.gnu:
-	@ $(DO_GNU_SO); $(LINK_SO_O)
+	@ $(DO_GNU); $(LINK_SO_O)
 link_a.gnu:
-	@ $(DO_GNU_SO); $(LINK_SO_A)
-link_app.gnu:
-	@ $(DO_GNU_APP); $(LINK_APP)
-
-DO_BEOS_SO=	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SUFFIX"
-
-link_o.beos:
-	@ $(DO_BEOS_SO); $(LINK_SO_O)
-link_a.beos:
-	@ $(DO_BEOS_SO); $(LINK_SO_A)
-
-link_o.bsd:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS=" "; \
-	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
-	NOALLSYMSFLAGS=; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
-	fi; $(LINK_SO_O)
-link_a.bsd:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS=" "; \
-	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
-	NOALLSYMSFLAGS=; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
-	fi; $(LINK_SO_A)
-link_app.bsd:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
-	LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBPATH)"; \
-	fi; $(LINK_APP)
+	@ $(DO_GNU); $(LINK_SO_A)
 
 # For Darwin AKA Mac OS/X (dyld)
-# Originally link_o.darwin produced .so, because it was hard-coded
-# in dso_dlfcn module. At later point dso_dlfcn switched to .dylib
-# extension in order to allow for run-time linking with vendor-
-# supplied shared libraries such as libz, so that link_o.darwin had
-# to be harmonized with it. This caused minor controversy, because
-# it was believed that dlopen can't be used to dynamically load
-# .dylib-s, only so called bundle modules (ones linked with -bundle
-# flag). The belief seems to be originating from pre-10.4 release,
-# where dlfcn functionality was emulated by dlcompat add-on. In
-# 10.4 dlopen was rewritten as native part of dyld and is documented
-# to be capable of loading both dynamic libraries and bundles. In
-# order to provide compatibility with pre-10.4 dlopen, modules are
-# linked with -bundle flag, which makes .dylib extension misleading.
-# It works, because dlopen is [and always was] extension-agnostic.
-# Alternative to this heuristic approach is to develop specific
-# MacOS X dso module relying on whichever "native" dyld interface.
 link_o.darwin:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	ALLSYMSFLAGS='-all_load'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) `echo $(SHARED_LDFLAGS) | sed s/dynamiclib/bundle/`"; \
+	SHLIB=lib$(LIBNAME) \
+	SHLIB_SUFFIX=.dylib \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS='-all_load' \
+	NOALLSYMSFLAGS='' \
+	SHAREDFLAGS="-dynamiclib" \
+	SHAREDCMD='$(CC)'; \
 	if [ -n "$(LIBVERSION)" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
+		SHAREDFLAGS="$SHAREDFLAGS -current_version $(LIBVERSION)"; \
 	fi; \
 	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
+		SHAREDFLAGS="$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
 	fi; \
 	$(LINK_SO_O)
 link_a.darwin:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	ALLSYMSFLAGS='-all_load'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
+	SHLIB=lib$(LIBNAME) \
+	SHLIB_SUFFIX=.dylib \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS='-all_load' \
+	NOALLSYMSFLAGS='' \
+	SHAREDFLAGS="-dynamiclib" \
+	SHAREDCMD='$(CC)'; \
 	if [ -n "$(LIBVERSION)" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
+		SHAREDFLAGS="$SHAREDFLAGS -current_version $(LIBVERSION)"; \
 	fi; \
 	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
+		SHAREDFLAGS="$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
 	fi; \
-	SHAREDFLAGS="$$SHAREDFLAGS -install_name $(INSTALLTOP)/$(LIBDIR)/$$SHLIB$(SHLIB_EXT)"; \
 	$(LINK_SO_A)
-link_app.darwin:	# is there run-path on darwin?
-	$(LINK_APP)
 
 link_o.cygwin:
 	@ $(CALC_VERSIONS); \
 	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME); \
-	base=-Wl,--enable-auto-image-base; \
-	deffile=; \
-	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-		SHLIB=$(LIBNAME)eay32; base=; \
-		if test -f $(LIBNAME)eay32.def; then \
-			deffile=$(LIBNAME)eay32.def; \
-		fi; \
-	fi; \
-	SHLIB_SUFFIX=.dll; \
-	LIBVERSION="$(LIBVERSION)"; \
-	SHLIB_SOVER=${LIBVERSION:+"-$(LIBVERSION)"}; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base $$deffile -Wl,-s,-Bsymbolic"; \
+	SHLIB=cyg$(LIBNAME) \
+	SHLIB_SUFFIX=.dll \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	SHLIB_SOVER=-$(LIBVERSION) \
+	ALLSYMSFLAGS='-Wl,--whole-archive' \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive' \
+	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a" \
+	SHAREDCMD='${CC}'; \
 	$(LINK_SO_O)
-#for mingw target if def-file is in use dll-name should match library-name
 link_a.cygwin:
 	@ $(CALC_VERSIONS); \
 	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME); SHLIB_SOVER=-$(LIBVERSION); SHLIB_SUFFIX=.dll; \
-	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; extras=; \
-	base=-Wl,--enable-auto-image-base; \
-	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-		case $(LIBNAME) in \
-			crypto) SHLIB=libeay;; \
-			ssl) SHLIB=ssleay;; \
-		esac; \
-		SHLIB_SOVER=32; \
-		extras="$(LIBNAME).def"; \
-		$(PERL) util/mkdef.pl 32 $$SHLIB > $$extras; \
-		base=; [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
-	fi; \
-	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
-	$(PERL) util/mkrc.pl $$dll_name | \
-		$(CROSS_COMPILE)windres -o rc.o; \
-	extras="$$extras rc.o"; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-s,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a $$extras"; \
-	[ -f apps/$$dll_name ] && rm apps/$$dll_name; \
-	[ -f test/$$dll_name ] && rm test/$$dll_name; \
-	$(LINK_SO_A) || exit 1; \
-	rm $$extras; \
-	cp -p $$dll_name apps/; \
-	cp -p $$dll_name test/
-link_app.cygwin:
-	@if expr "$(CFLAGS)" : '.*OPENSSL_USE_APPLINK' > /dev/null; then \
-		LIBDEPS="$(TOP)/crypto/applink.o $${LIBDEPS:-$(LIBDEPS)}"; \
-		export LIBDEPS; \
-	fi; \
-	$(LINK_APP)
+	SHLIB=cyg$(LIBNAME) \
+	SHLIB_SUFFIX=.dll \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	SHLIB_SOVER= \
+	ALLSYMSFLAGS='-Wl,--whole-archive' \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive' \
+	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a" \
+	SHAREDCMD='${CC}'; \
+	$(LINK_SO_A)
 
 link_o.alpha-osf1:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
 	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
 		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
 		if [ -n "$$SHLIB_HIST" ]; then \
 			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
 		else \
 			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
+		fi
+		SHLIB_SOVER= \
+		ALLSYMSFLAGS='-all' \
+		NOALLSYMSFLAGS='-none' \
+		SHAREDFLAGS="-shared" \
+		SHAREDCMD='$(CC)'; \
 		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
+			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
 		fi; \
 	fi; \
 	$(LINK_SO_O)
 link_a.alpha-osf1:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
 	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
 		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
 		if [ -n "$$SHLIB_HIST" ]; then \
 			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
 		else \
 			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
+		fi
+		SHLIB_SOVER= \
+		ALLSYMSFLAGS='-all' \
+		NOALLSYMSFLAGS='-none' \
+		SHAREDFLAGS="-shared" \
+		SHAREDCMD='$(CC)'; \
 		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
+			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
 		fi; \
 	fi; \
 	$(LINK_SO_A)
-link_app.alpha-osf1:
-	@if $(DETECT_GNU_LD); then \
-		$(DO_GNU_APP); \
+
+# The difference between alpha-osf1-shared and tru64-shared is the `-msym'
+# option passed to the linker.
+link_o.tru64:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
 	else \
-		LDFLAGS="$(CFLAGS) -rpath $(LIBRPATH)"; \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
+		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
+		else \
+			SHLIB_HIST="$(LIBVERSION)"; \
+		fi
+		SHLIB_SOVER= \
+		ALLSYMSFLAGS='-all' \
+		NOALLSYMSFLAGS='-none' \
+		SHAREDFLAGS="-shared -msym" \
+		SHAREDCMD='$(CC)'; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+		fi; \
 	fi; \
-	$(LINK_APP)
+	$(LINK_SO_O)
+link_a.tru64:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
+	else \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
+		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
+		else \
+			SHLIB_HIST="$(LIBVERSION)"; \
+		fi
+		SHLIB_SOVER= \
+		ALLSYMSFLAGS='-all' \
+		NOALLSYMSFLAGS='-none' \
+		SHAREDFLAGS="-shared -msym" \
+		SHAREDCMD='$(CC)'; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+		fi; \
+	fi; \
+	$(LINK_SO_A)
+
+# The difference between tru64-shared and tru64-shared-rpath is the
+# -rpath ${LIBRPATH} passed to the linker.
+link_o.tru64-rpath:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
+	else \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
+		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
+		else \
+			SHLIB_HIST="$(LIBVERSION)"; \
+		fi
+		SHLIB_SOVER= \
+		ALLSYMSFLAGS='-all' \
+		NOALLSYMSFLAGS='-none' \
+		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)" \
+		SHAREDCMD='$(CC)'; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+		fi; \
+	fi; \
+	$(LINK_SO_O)
+link_a.tru64-rpath:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
+	else \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
+		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
+		else \
+			SHLIB_HIST="$(LIBVERSION)"; \
+		fi
+		SHLIB_SOVER= \
+		ALLSYMSFLAGS='-all' \
+		NOALLSYMSFLAGS='-none' \
+		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)" \
+		SHAREDCMD='$(CC)'; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+		fi; \
+	fi; \
+	$(LINK_SO_A)
 
 link_o.solaris:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
 	else \
 		$(CALC_VERSIONS); \
-		MINUSZ='-z '; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
-		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
+		ALLSYMSFLAGS='-z allextract' \
+		NOALLSYMSFLAGS='' \
+		SHAREDFLAGS='-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_O)
 link_a.solaris:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
 	else \
 		$(CALC_VERSIONS); \
-		MINUSZ='-z '; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=;\
-		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
-		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
+		ALLSYMSFLAGS='-z allextract' \
+		NOALLSYMSFLAGS='' \
+		SHAREDFLAGS='-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_A)
-link_app.solaris:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_APP); \
-	else \
-		LDFLAGS="$(CFLAGS) -R $(LIBRPATH)"; \
-	fi; \
-	$(LINK_APP)
 
 # OpenServer 5 native compilers used
+# UnixWare 7 and OpenUNIX 8 native compilers used
 link_o.svr3:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
 	else \
 		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
+		ALLSYMSFLAGS='-z allextract' \
+		NOALLSYMSFLAGS='' \
+		SHAREDFLAGS='-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_O)
 link_a.svr3:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
 	else \
 		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
+		ALLSYMSFLAGS='-z allextract' \
+		NOALLSYMSFLAGS='' \
+		SHAREDFLAGS='-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_A_UNPACKED)
-link_app.svr3:
-	@$(DETECT_GNU_LD) && $(DO_GNU_APP); \
-	$(LINK_APP)
-
-# UnixWare 7 and OpenUNIX 8 native compilers used
-link_o.svr5:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHARE_FLAG='-G'; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.svr5:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHARE_FLAG='-G'; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; \
-	$(LINK_SO_A_UNPACKED)
-link_app.svr5:
-	@$(DETECT_GNU_LD) && $(DO_GNU_APP); \
-	$(LINK_APP)
 
 link_o.irix:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
 	else \
 		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		MINUSWL=""; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
-		ALLSYMSFLAGS="$${MINUSWL}-all"; \
-		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
+		ALLSYMSFLAGS='-all' \
+		NOALLSYMSFLAGS='' \
+		SHAREDFLAGS='-shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_O)
 link_a.irix:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU); \
 	else \
 		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		MINUSWL=""; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
-		ALLSYMSFLAGS="$${MINUSWL}-all"; \
-		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
+		SHLIB=lib$(LIBNAME).so \
+		SHLIB_SUFFIX= \
+		LIBDEPS="$(LIBDEPS) -lc" \
+		ALLSYMSFLAGS='-all' \
+		NOALLSYMSFLAGS='' \
+		SHAREDFLAGS='-shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_A)
-link_app.irix:
-	@LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"; \
-	$(LINK_APP)
 
-# 32-bit PA-RISC HP-UX embeds the -L pathname of libs we link with, so
-# we compensate for it with +cdp ../: and +cdp ./:. Yes, these rewrite
-# rules imply that we can only link one level down in catalog structure,
-# but that's what takes place for the moment of this writing. +cdp option
-# was introduced in HP-UX 11.x and applies in 32-bit PA-RISC link
-# editor context only [it's simply ignored in other cases, which are all
-# ELFs by the way].
+# HP-UX includes the full pathname of libs we depend on, so we would get
+# ./libcrypto (with ./ as path information) compiled into libssl, hence
+# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto
+# anyway.
+# The object modules are loaded from lib$i.a using the undocumented -Fl
+# option.
 #
-link_o.hpux:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	expr "$(CFLAGS)" : '.*DSO_DLFCN' > /dev/null && SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,-Fl'; \
-	NOALLSYMSFLAGS=''; \
-	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
-	fi; \
-	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
+# WARNING: Until DSO is fixed to support a search path, we support SHLIB_PATH
+#          by temporarily specifying "+s"!
+#
+link_o.hpux32:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).sl \
+	SHLIB_SUFFIX= \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS='-Fl' \
+	NOALLSYMSFLAGS='' \
+	SHAREDFLAGS='+vnocompatwarnings -b -z +s +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+	SHAREDCMD='/usr/ccs/bin/ld'; \
 	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
-link_a.hpux:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,-Fl'; \
-	NOALLSYMSFLAGS=''; \
-	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
-	fi; \
-	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
+link_a.hpux32:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).sl \
+	SHLIB_SUFFIX= \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS='-Fl' \
+	NOALLSYMSFLAGS='' \
+	SHAREDFLAGS='+vnocompatwarnings -b -z +s +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+	SHAREDCMD='/usr/ccs/bin/ld'; \
+	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
+
+# HP-UX includes the full pathname of libs we depend on, so we would get
+# ./libcrypto (with ./ as path information) compiled into libssl, hence
+# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto
+# anyway.
+#
+# HP-UX in 64bit mode has "+s" enabled by default; it will search for
+# shared libraries along LD_LIBRARY_PATH _and_ SHLIB_PATH.
+#
+link_o.hpux64:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).sl \
+	SHLIB_SUFFIX= \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS='+forceload' \
+	NOALLSYMSFLAGS='' \
+	SHAREDFLAGS='-b -z +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+	SHAREDCMD='/usr/ccs/bin/ld'; \
+	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
+link_a.hpux64:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).sl \
+	SHLIB_SUFFIX= \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS='+forceload' \
+	NOALLSYMSFLAGS='' \
+	SHAREDFLAGS='-b -z +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+	SHAREDCMD='/usr/ccs/bin/ld'; \
 	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
-link_app.hpux:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
-	LDFLAGS="$(CFLAGS) -Wl,+s,+cdp,../:,+cdp,./:,+b,$(LIBRPATH)"; \
-	fi; \
-	$(LINK_APP)
 
 link_o.aix:
 	@ $(CALC_VERSIONS); \
-	OBJECT_MODE=`expr "x$(SHARED_LDFLAGS)" : 'x\-[a-z]*\(64\)'` || :; \
-	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS=''; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
-	$(LINK_SO_O);
+	SHLIB=lib$(LIBNAME).so \
+	SHLIB_SUFFIX= \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS='-bnogc' \
+	NOALLSYMSFLAGS='' \
+	SHAREDFLAGS='-G -bE:lib$(LIBNAME).exp -bM:SRE' \
+	SHAREDCMD='$(CC)'; \
+	$(LINK_SO_O)
 link_a.aix:
 	@ $(CALC_VERSIONS); \
-	OBJECT_MODE=`expr "x$(SHARED_LDFLAGS)" : 'x\-[a-z]*\(64\)'` || : ; \
-	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-bnogc'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
+	SHLIB=lib$(LIBNAME).so \
+	SHLIB_SUFFIX= \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS='-bnogc' \
+	NOALLSYMSFLAGS='' \
+	SHAREDFLAGS='-G -bE:lib$(LIBNAME).exp -bM:SRE' \
+	SHAREDCMD='$(CC)'; \
 	$(LINK_SO_A_VIA_O)
-link_app.aix:
-	LDFLAGS="$(CFLAGS) -Wl,-brtl,-blibpath:$(LIBRPATH):$${LIBPATH:-/usr/lib:/lib}"; \
-	$(LINK_APP)
 
 link_o.reliantunix:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS=; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) -G'; \
+	SHLIB=lib$(LIBNAME).so \
+	SHLIB_SUFFIX= \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS= \
+	NOALLSYMSFLAGS='' \
+	SHAREDFLAGS='-G' \
+	SHAREDCMD='$(CC)'; \
 	$(LINK_SO_O)
 link_a.reliantunix:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS=; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) -G'; \
+	SHLIB=lib$(LIBNAME).so \
+	SHLIB_SUFFIX= \
+	LIBDEPS="$(LIBDEPS) -lc" \
+	ALLSYMSFLAGS= \
+	NOALLSYMSFLAGS='' \
+	SHAREDFLAGS='-G' \
+	SHAREDCMD='$(CC)'; \
 	$(LINK_SO_A_UNPACKED)
-link_app.reliantunix:
-	$(LINK_APP)
 
 # Targets to build symbolic links when needed
-symlink.gnu symlink.solaris symlink.svr3 symlink.svr5 symlink.irix \
+symlink.gnu symlink.solaris symlink.svr3 symlink.irix \
 symlink.aix symlink.reliantunix:
 	@ $(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	$(SYMLINK_SO)
 symlink.darwin:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
+	SHLIB=lib$(LIBNAME) \
 	SHLIB_SUFFIX=.dylib; \
 	$(SYMLINK_SO)
-symlink.hpux:
+symlink.hpux32 symlink.hpux64:
 	@ $(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).sl; \
-	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
 	$(SYMLINK_SO)
 # The following lines means those specific architectures do no symlinks
-symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath symlink.beos:
+symlink.cygwin symlib.alpha-osf1 symlink.tru64 symlink.tru64-rpath:
 
 # Compatibility targets
 link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu
 link_a.bsd-gcc-shared link_a.linux-shared link_a.gnu-shared: link_a.gnu
-link_app.bsd-gcc-shared link_app.linux-shared link_app.gnu-shared: link_app.gnu
-symlink.bsd-gcc-shared symlink.bsd-shared symlink.linux-shared symlink.gnu-shared: symlink.gnu
-link_o.bsd-shared: link_o.bsd
-link_a.bsd-shared: link_a.bsd
-link_app.bsd-shared: link_app.bsd
+symlink.bsd-gcc-shared symlink.linux-shared symlink.gnu-shared: symlink.gnu
 link_o.darwin-shared: link_o.darwin
 link_a.darwin-shared: link_a.darwin
-link_app.darwin-shared: link_app.darwin
 symlink.darwin-shared: symlink.darwin
 link_o.cygwin-shared: link_o.cygwin
 link_a.cygwin-shared: link_a.cygwin
-link_app.cygwin-shared: link_app.cygwin
 symlink.cygwin-shared: symlink.cygwin
 link_o.alpha-osf1-shared: link_o.alpha-osf1
 link_a.alpha-osf1-shared: link_a.alpha-osf1
-link_app.alpha-osf1-shared: link_app.alpha-osf1
 symlink.alpha-osf1-shared: symlink.alpha-osf1
 link_o.tru64-shared: link_o.tru64
 link_a.tru64-shared: link_a.tru64
-link_app.tru64-shared: link_app.tru64
 symlink.tru64-shared: symlink.tru64
 link_o.tru64-shared-rpath: link_o.tru64-rpath
 link_a.tru64-shared-rpath: link_a.tru64-rpath
-link_app.tru64-shared-rpath: link_app.tru64-rpath
 symlink.tru64-shared-rpath: symlink.tru64-rpath
 link_o.solaris-shared: link_o.solaris
 link_a.solaris-shared: link_a.solaris
-link_app.solaris-shared: link_app.solaris
 symlink.solaris-shared: symlink.solaris
 link_o.svr3-shared: link_o.svr3
 link_a.svr3-shared: link_a.svr3
-link_app.svr3-shared: link_app.svr3
 symlink.svr3-shared: symlink.svr3
-link_o.svr5-shared: link_o.svr5
-link_a.svr5-shared: link_a.svr5
-link_app.svr5-shared: link_app.svr5
-symlink.svr5-shared: symlink.svr5
+link_o.svr5-shared: link_o.svr3
+link_a.svr5-shared: link_a.svr3
+symlink.svr5-shared: symlink.svr3
 link_o.irix-shared: link_o.irix
 link_a.irix-shared: link_a.irix
-link_app.irix-shared: link_app.irix
 symlink.irix-shared: symlink.irix
-link_o.hpux-shared: link_o.hpux
-link_a.hpux-shared: link_a.hpux
-link_app.hpux-shared: link_app.hpux
-symlink.hpux-shared: symlink.hpux
+link_o.hpux-shared: link_o.hpux32
+link_a.hpux-shared: link_a.hpux32
+symlink.hpux-shared: symlink.hpux32
+link_o.hpux64-shared: link_o.hpux64
+link_a.hpux64-shared: link_a.hpux64
+symlink.hpux64-shared: symlink.hpux64
 link_o.aix-shared: link_o.aix
 link_a.aix-shared: link_a.aix
-link_app.aix-shared: link_app.aix
 symlink.aix-shared: symlink.aix
 link_o.reliantunix-shared: link_o.reliantunix
 link_a.reliantunix-shared: link_a.reliantunix
-link_app.reliantunix-shared: link_app.reliantunix
 symlink.reliantunix-shared: symlink.reliantunix
-link_o.beos-shared: link_o.beos
-link_a.beos-shared: link_a.beos
-link_app.beos-shared: link_app.gnu
-symlink.beos-shared: symlink.beos

NEWS

@@ -5,320 +5,6 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
-  Major changes between OpenSSL 1.0.0c and OpenSSL 1.0.0d:
-
-      o Fix for security issue CVE-2011-0014
-
-  Major changes between OpenSSL 1.0.0b and OpenSSL 1.0.0c:
-
-      o Fix for security issue CVE-2010-4180
-      o Fix for CVE-2010-4252
-      o Fix mishandling of absent EC point format extension.
-      o Fix various platform compilation issues.
-      o Corrected fix for security issue CVE-2010-3864.
-
-  Major changes between OpenSSL 1.0.0a and OpenSSL 1.0.0b:
-
-      o Fix for security issue CVE-2010-3864.
-      o Fix for CVE-2010-2939
-      o Fix WIN32 build system for GOST ENGINE.
-
-  Major changes between OpenSSL 1.0.0 and OpenSSL 1.0.0a:
-
-      o Fix for security issue CVE-2010-1633.
-      o GOST MAC and CFB fixes.
-
-  Major changes between OpenSSL 0.9.8n and OpenSSL 1.0.0:
-
-      o RFC3280 path validation: sufficient to process PKITS tests.
-      o Integrated support for PVK files and keyblobs.
-      o Change default private key format to PKCS#8.
-      o CMS support: able to process all examples in RFC4134
-      o Streaming ASN1 encode support for PKCS#7 and CMS.
-      o Multiple signer and signer add support for PKCS#7 and CMS.
-      o ASN1 printing support.
-      o Whirlpool hash algorithm added.
-      o RFC3161 time stamp support.
-      o New generalised public key API supporting ENGINE based algorithms.
-      o New generalised public key API utilities.
-      o New ENGINE supporting GOST algorithms.
-      o SSL/TLS GOST ciphersuite support.
-      o PKCS#7 and CMS GOST support.
-      o RFC4279 PSK ciphersuite support.
-      o Supported points format extension for ECC ciphersuites.
-      o ecdsa-with-SHA224/256/384/512 signature types.
-      o dsa-with-SHA224 and dsa-with-SHA256 signature types.
-      o Opaque PRF Input TLS extension support.
-      o Updated time routines to avoid OS limitations.
-
-  Major changes between OpenSSL 0.9.8q and OpenSSL 0.9.8r:
-
-      o Fix for security issue CVE-2011-0014
-
-  Major changes between OpenSSL 0.9.8p and OpenSSL 0.9.8q:
-
-      o Fix for security issue CVE-2010-4180
-      o Fix for CVE-2010-4252
-
-  Major changes between OpenSSL 0.9.8o and OpenSSL 0.9.8p:
-
-      o Fix for security issue CVE-2010-3864.
-
-  Major changes between OpenSSL 0.9.8n and OpenSSL 0.9.8o:
-
-      o Fix for security issue CVE-2010-0742.
-      o Various DTLS fixes.
-      o Recognise SHA2 certificates if only SSL algorithms added.
-      o Fix for no-rc4 compilation.
-      o Chil ENGINE unload workaround.
-
-  Major changes between OpenSSL 0.9.8m and OpenSSL 0.9.8n:
-
-      o CFB cipher definition fixes.
-      o Fix security issues CVE-2010-0740 and CVE-2010-0433.
-
-  Major changes between OpenSSL 0.9.8l and OpenSSL 0.9.8m:
-
-      o Cipher definition fixes.
-      o Workaround for slow RAND_poll() on some WIN32 versions.
-      o Remove MD2 from algorithm tables.
-      o SPKAC handling fixes.
-      o Support for RFC5746 TLS renegotiation extension.
-      o Compression memory leak fixed.
-      o Compression session resumption fixed.
-      o Ticket and SNI coexistence fixes.
-      o Many fixes to DTLS handling. 
-
-  Major changes between OpenSSL 0.9.8k and OpenSSL 0.9.8l:
-
-      o Temporary work around for CVE-2009-3555: disable renegotiation.
-
-  Major changes between OpenSSL 0.9.8j and OpenSSL 0.9.8k:
-
-      o Fix various build issues.
-      o Fix security issues (CVE-2009-0590, CVE-2009-0591, CVE-2009-0789)
-
-  Major changes between OpenSSL 0.9.8i and OpenSSL 0.9.8j:
-
-      o Fix security issue (CVE-2008-5077)
-      o Merge FIPS 140-2 branch code.
-
-  Major changes between OpenSSL 0.9.8g and OpenSSL 0.9.8h:
-
-      o CryptoAPI ENGINE support.
-      o Various precautionary measures.
-      o Fix for bugs affecting certificate request creation.
-      o Support for local machine keyset attribute in PKCS#12 files.
-
-  Major changes between OpenSSL 0.9.8f and OpenSSL 0.9.8g:
-
-      o Backport of CMS functionality to 0.9.8.
-      o Fixes for bugs introduced with 0.9.8f.
-
-  Major changes between OpenSSL 0.9.8e and OpenSSL 0.9.8f:
-
-      o Add gcc 4.2 support.
-      o Add support for AES and SSE2 assembly lanugauge optimization
-        for VC++ build.
-      o Support for RFC4507bis and server name extensions if explicitly 
-        selected at compile time.
-      o DTLS improvements.
-      o RFC4507bis support.
-      o TLS Extensions support.
-
-  Major changes between OpenSSL 0.9.8d and OpenSSL 0.9.8e:
-
-      o Various ciphersuite selection fixes.
-      o RFC3779 support.
-
-  Major changes between OpenSSL 0.9.8c and OpenSSL 0.9.8d:
-
-      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
-      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
-      o Changes to ciphersuite selection algorithm
-
-  Major changes between OpenSSL 0.9.8b and OpenSSL 0.9.8c:
-
-      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
-      o New cipher Camellia
-
-  Major changes between OpenSSL 0.9.8a and OpenSSL 0.9.8b:
-
-      o Cipher string fixes.
-      o Fixes for VC++ 2005.
-      o Updated ECC cipher suite support.
-      o New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free().
-      o Zlib compression usage fixes.
-      o Built in dynamic engine compilation support on Win32.
-      o Fixes auto dynamic engine loading in Win32.
-
-  Major changes between OpenSSL 0.9.8 and OpenSSL 0.9.8a:
-
-      o Fix potential SSL 2.0 rollback, CVE-2005-2969
-      o Extended Windows CE support
-
-  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.8:
-
-      o Major work on the BIGNUM library for higher efficiency and to
-        make operations more streamlined and less contradictory.  This
-        is the result of a major audit of the BIGNUM library.
-      o Addition of BIGNUM functions for fields GF(2^m) and NIST
-        curves, to support the Elliptic Crypto functions.
-      o Major work on Elliptic Crypto; ECDH and ECDSA added, including
-        the use through EVP, X509 and ENGINE.
-      o New ASN.1 mini-compiler that's usable through the OpenSSL
-        configuration file.
-      o Added support for ASN.1 indefinite length constructed encoding.
-      o New PKCS#12 'medium level' API to manipulate PKCS#12 files.
-      o Complete rework of shared library construction and linking
-        programs with shared or static libraries, through a separate
-        Makefile.shared.
-      o Rework of the passing of parameters from one Makefile to another.
-      o Changed ENGINE framework to load dynamic engine modules
-        automatically from specifically given directories.
-      o New structure and ASN.1 functions for CertificatePair.
-      o Changed the ZLIB compression method to be stateful.
-      o Changed the key-generation and primality testing "progress"
-        mechanism to take a structure that contains the ticker
-        function and an argument.
-      o New engine module: GMP (performs private key exponentiation).
-      o New engine module: VIA PadLOck ACE extension in VIA C3
-        Nehemiah processors.
-      o Added support for IPv6 addresses in certificate extensions.
-        See RFC 1884, section 2.2.
-      o Added support for certificate policy mappings, policy
-        constraints and name constraints.
-      o Added support for multi-valued AVAs in the OpenSSL
-        configuration file.
-      o Added support for multiple certificates with the same subject
-        in the 'openssl ca' index file.
-      o Make it possible to create self-signed certificates using
-        'openssl ca -selfsign'.
-      o Make it possible to generate a serial number file with
-        'openssl ca -create_serial'.
-      o New binary search functions with extended functionality.
-      o New BUF functions.
-      o New STORE structure and library to provide an interface to all
-        sorts of data repositories.  Supports storage of public and
-        private keys, certificates, CRLs, numbers and arbitrary blobs.
-	This library is unfortunately unfinished and unused withing
-	OpenSSL.
-      o New control functions for the error stack.
-      o Changed the PKCS#7 library to support one-pass S/MIME
-        processing.
-      o Added the possibility to compile without old deprecated
-        functionality with the OPENSSL_NO_DEPRECATED macro or the
-        'no-deprecated' argument to the config and Configure scripts.
-      o Constification of all ASN.1 conversion functions, and other
-        affected functions.
-      o Improved platform support for PowerPC.
-      o New FIPS 180-2 algorithms (SHA-224, -256, -384 and -512).
-      o New X509_VERIFY_PARAM structure to support parametrisation
-        of X.509 path validation.
-      o Major overhaul of RC4 performance on Intel P4, IA-64 and
-        AMD64.
-      o Changed the Configure script to have some algorithms disabled
-        by default.  Those can be explicitely enabled with the new
-        argument form 'enable-xxx'.
-      o Change the default digest in 'openssl' commands from MD5 to
-        SHA-1.
-      o Added support for DTLS.
-      o New BIGNUM blinding.
-      o Added support for the RSA-PSS encryption scheme
-      o Added support for the RSA X.931 padding.
-      o Added support for BSD sockets on NetWare.
-      o Added support for files larger than 2GB.
-      o Added initial support for Win64.
-      o Added alternate pkg-config files.
-
-  Major changes between OpenSSL 0.9.7l and OpenSSL 0.9.7m:
-
-      o FIPS 1.1.1 module linking.
-      o Various ciphersuite selection fixes.
-
-  Major changes between OpenSSL 0.9.7k and OpenSSL 0.9.7l:
-
-      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
-      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
-
-  Major changes between OpenSSL 0.9.7j and OpenSSL 0.9.7k:
-
-      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
-
-  Major changes between OpenSSL 0.9.7i and OpenSSL 0.9.7j:
-
-      o Visual C++ 2005 fixes.
-      o Update Windows build system for FIPS.
-
-  Major changes between OpenSSL 0.9.7h and OpenSSL 0.9.7i:
-
-      o Give EVP_MAX_MD_SIZE it's old value, except for a FIPS build.
-
-  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.7h:
-
-      o Fix SSL 2.0 Rollback, CVE-2005-2969
-      o Allow use of fixed-length exponent on DSA signing
-      o Default fixed-window RSA, DSA, DH private-key operations
-
-  Major changes between OpenSSL 0.9.7f and OpenSSL 0.9.7g:
-
-      o More compilation issues fixed.
-      o Adaptation to more modern Kerberos API.
-      o Enhanced or corrected configuration for Solaris64, Mingw and Cygwin.
-      o Enhanced x86_64 assembler BIGNUM module.
-      o More constification.
-      o Added processing of proxy certificates (RFC 3820).
-
-  Major changes between OpenSSL 0.9.7e and OpenSSL 0.9.7f:
-
-      o Several compilation issues fixed.
-      o Many memory allocation failure checks added.
-      o Improved comparison of X509 Name type.
-      o Mandatory basic checks on certificates.
-      o Performance improvements.
-
-  Major changes between OpenSSL 0.9.7d and OpenSSL 0.9.7e:
-
-      o Fix race condition in CRL checking code.
-      o Fixes to PKCS#7 (S/MIME) code.
-
-  Major changes between OpenSSL 0.9.7c and OpenSSL 0.9.7d:
-
-      o Security: Fix Kerberos ciphersuite SSL/TLS handshaking bug
-      o Security: Fix null-pointer assignment in do_change_cipher_spec()
-      o Allow multiple active certificates with same subject in CA index
-      o Multiple X509 verification fixes
-      o Speed up HMAC and other operations
-
-  Major changes between OpenSSL 0.9.7b and OpenSSL 0.9.7c:
-
-      o Security: fix various ASN1 parsing bugs.
-      o New -ignore_err option to OCSP utility.
-      o Various interop and bug fixes in S/MIME code.
-      o SSL/TLS protocol fix for unrequested client certificates.
-
-  Major changes between OpenSSL 0.9.7a and OpenSSL 0.9.7b:
-
-      o Security: counter the Klima-Pokorny-Rosa extension of
-        Bleichbacher's attack 
-      o Security: make RSA blinding default.
-      o Configuration: Irix fixes, AIX fixes, better mingw support.
-      o Support for new platforms: linux-ia64-ecc.
-      o Build: shared library support fixes.
-      o ASN.1: treat domainComponent correctly.
-      o Documentation: fixes and additions.
-
-  Major changes between OpenSSL 0.9.7 and OpenSSL 0.9.7a:
-
-      o Security: Important security related bugfixes.
-      o Enhanced compatibility with MIT Kerberos.
-      o Can be built without the ENGINE framework.
-      o IA32 assembler enhancements.
-      o Support for new platforms: FreeBSD/IA64 and FreeBSD/Sparc64.
-      o Configuration: the no-err option now works properly.
-      o SSL/TLS: now handles manual certificate chain building.
-      o SSL/TLS: certain session ID malfunctions corrected.
-
   Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.7:
 
       o New library section OCSP.
@@ -332,14 +18,11 @@
       o New elliptic curve library section.
       o New AES (Rijndael) library section.
       o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit,
-        Linux x86_64, Linux 64-bit on Sparc v9
+        Linux x86_64
       o Extended support for some platforms: VxWorks
       o Enhanced support for shared libraries.
-      o Now only builds PIC code when shared library support is requested.
       o Support for pkg-config.
       o Lots of new manuals.
-      o Makes symbolic links to or copies of manuals to cover all described
-        functions.
       o Change DES API to clean up the namespace (some applications link also
         against libdes providing similar functions having the same name).
         Provide macros for backward compatibility (will be removed in the
@@ -365,22 +48,6 @@
       o SSL/TLS: add callback to retrieve SSL/TLS messages.
       o SSL/TLS: support AES cipher suites (RFC3268).
 
-  Major changes between OpenSSL 0.9.6j and OpenSSL 0.9.6k:
-
-      o Security: fix various ASN1 parsing bugs.
-      o SSL/TLS protocol fix for unrequested client certificates.
-
-  Major changes between OpenSSL 0.9.6i and OpenSSL 0.9.6j:
-
-      o Security: counter the Klima-Pokorny-Rosa extension of
-        Bleichbacher's attack 
-      o Security: make RSA blinding default.
-      o Build: shared library support fixes.
-
-  Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
-
-      o Important security related bugfixes.
-
   Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:
 
       o New configuration targets for Tandem OSS and A/UX.

Netware/build.bat

@@ -1,235 +0,0 @@
-@echo off
-
-rem ========================================================================
-rem   Batch file to automate building OpenSSL for NetWare.
-rem
-rem   usage:
-rem      build [target] [debug opts] [assembly opts] [configure opts]
-rem
-rem      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
-rem                    - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
-rem                    - "netware-libc" - LibC NetWare build (WinSock Sockets)
-rem                    - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
-rem 
-rem      debug opts    - "debug"  - build debug
-rem
-rem      assembly opts - "nw-mwasm" - use Metrowerks assembler
-rem                    - "nw-nasm"  - use NASM assembler
-rem                    - "no-asm"   - don't use assembly
-rem
-rem      configure opts- all unrecognized arguments are passed to the
-rem                       perl configure script
-rem
-rem   If no arguments are specified the default is to build non-debug with
-rem   no assembly.  NOTE: there is no default BLD_TARGET.
-rem
-
-
-
-rem   No assembly is the default - Uncomment section below to change
-rem   the assembler default
-set ASM_MODE=
-set ASSEMBLER=
-set NO_ASM=no-asm
-
-rem   Uncomment to default to the Metrowerks assembler
-rem set ASM_MODE=nw-mwasm
-rem set ASSEMBLER=Metrowerks
-rem set NO_ASM=
-
-rem   Uncomment to default to the NASM assembler
-rem set ASM_MODE=nw-nasm
-rem set ASSEMBLER=NASM
-rem set NO_ASM=
-
-rem   No default Bld target
-set BLD_TARGET=no_target
-rem set BLD_TARGET=netware-clib
-rem set BLD_TARGET=netware-libc
-
-
-rem   Default to build non-debug
-set DEBUG=
-                                    
-rem   Uncomment to default to debug build
-rem set DEBUG=debug
-
-
-set CONFIG_OPTS=
-set ARG_PROCESSED=NO
-
-
-rem   Process command line args
-:opts
-if "a%1" == "a" goto endopt
-if "%1" == "no-asm"   set NO_ASM=no-asm
-if "%1" == "no-asm"   set ARG_PROCESSED=YES
-if "%1" == "debug"    set DEBUG=debug
-if "%1" == "debug"    set ARG_PROCESSED=YES
-if "%1" == "nw-nasm"  set ASM_MODE=nw-nasm
-if "%1" == "nw-nasm"  set ASSEMBLER=NASM
-if "%1" == "nw-nasm"  set NO_ASM=
-if "%1" == "nw-nasm"  set ARG_PROCESSED=YES
-if "%1" == "nw-mwasm" set ASM_MODE=nw-mwasm
-if "%1" == "nw-mwasm" set ASSEMBLER=Metrowerks
-if "%1" == "nw-mwasm" set NO_ASM=
-if "%1" == "nw-mwasm" set ARG_PROCESSED=YES
-if "%1" == "netware-clib" set BLD_TARGET=netware-clib
-if "%1" == "netware-clib" set ARG_PROCESSED=YES
-if "%1" == "netware-clib-bsdsock" set BLD_TARGET=netware-clib-bsdsock
-if "%1" == "netware-clib-bsdsock" set ARG_PROCESSED=YES
-if "%1" == "netware-libc" set BLD_TARGET=netware-libc
-if "%1" == "netware-libc" set ARG_PROCESSED=YES
-if "%1" == "netware-libc-bsdsock" set BLD_TARGET=netware-libc-bsdsock
-if "%1" == "netware-libc-bsdsock" set ARG_PROCESSED=YES
-
-rem   If we didn't recognize the argument, consider it an option for config
-if "%ARG_PROCESSED%" == "NO" set CONFIG_OPTS=%CONFIG_OPTS% %1
-if "%ARG_PROCESSED%" == "YES" set ARG_PROCESSED=NO
-
-shift
-goto opts
-:endopt
-
-rem make sure a valid BLD_TARGET was specified
-if "%BLD_TARGET%" == "no_target" goto no_target
-
-rem build the nlm make file name which includes target and debug info
-set NLM_MAKE=
-if "%BLD_TARGET%" == "netware-clib" set NLM_MAKE=netware\nlm_clib
-if "%BLD_TARGET%" == "netware-clib-bsdsock" set NLM_MAKE=netware\nlm_clib_bsdsock
-if "%BLD_TARGET%" == "netware-libc" set NLM_MAKE=netware\nlm_libc
-if "%BLD_TARGET%" == "netware-libc-bsdsock" set NLM_MAKE=netware\nlm_libc_bsdsock
-if "%DEBUG%" == "" set NLM_MAKE=%NLM_MAKE%.mak
-if "%DEBUG%" == "debug" set NLM_MAKE=%NLM_MAKE%_dbg.mak
-
-if "%NO_ASM%" == "no-asm" set ASM_MODE=
-if "%NO_ASM%" == "no-asm" set ASSEMBLER=
-if "%NO_ASM%" == "no-asm" set CONFIG_OPTS=%CONFIG_OPTS% no-asm
-if "%NO_ASM%" == "no-asm" goto do_config
-
-
-rem ==================================================
-echo Generating x86 for %ASSEMBLER% assembler
-
-echo Bignum
-cd crypto\bn\asm
-rem perl x86.pl %ASM_MODE% > bn-nw.asm
-perl bn-586.pl %ASM_MODE% > bn-nw.asm
-perl co-586.pl %ASM_MODE% > co-nw.asm
-cd ..\..\..
-
-echo AES
-cd crypto\aes\asm
-perl aes-586.pl %ASM_MODE% > a-nw.asm
-cd ..\..\..
-
-echo DES
-cd crypto\des\asm
-perl des-586.pl %ASM_MODE% > d-nw.asm
-cd ..\..\..
-
-echo "crypt(3)"
-
-cd crypto\des\asm
-perl crypt586.pl %ASM_MODE% > y-nw.asm
-cd ..\..\..
-
-echo Blowfish
-
-cd crypto\bf\asm
-perl bf-586.pl %ASM_MODE% > b-nw.asm
-cd ..\..\..
-
-echo CAST5
-cd crypto\cast\asm
-perl cast-586.pl %ASM_MODE% > c-nw.asm
-cd ..\..\..
-
-echo RC4
-cd crypto\rc4\asm
-perl rc4-586.pl %ASM_MODE% > r4-nw.asm
-cd ..\..\..
-
-echo MD5
-cd crypto\md5\asm
-perl md5-586.pl %ASM_MODE% > m5-nw.asm
-cd ..\..\..
-
-echo SHA1
-cd crypto\sha\asm
-perl sha1-586.pl %ASM_MODE% > s1-nw.asm
-perl sha256-586.pl %ASM_MODE% > sha256-nw.asm
-perl sha512-586.pl %ASM_MODE% > sha512-nw.asm
-cd ..\..\..
-
-echo RIPEMD160
-cd crypto\ripemd\asm
-perl rmd-586.pl %ASM_MODE% > rm-nw.asm
-cd ..\..\..
-
-echo RC5\32
-cd crypto\rc5\asm
-perl rc5-586.pl %ASM_MODE% > r5-nw.asm
-cd ..\..\..
-
-echo WHIRLPOOL
-cd crypto\whrlpool\asm
-perl wp-mmx.pl %ASM_MODE% > wp-nw.asm
-cd ..\..\..
-
-echo CPUID
-cd crypto
-perl x86cpuid.pl %ASM_MODE% > x86cpuid-nw.asm
-cd ..\
-
-rem ===============================================================
-rem
-:do_config
-
-echo .
-echo configure options: %CONFIG_OPTS% %BLD_TARGET%
-echo .
-perl configure %CONFIG_OPTS% %BLD_TARGET%
-
-perl util\mkfiles.pl >MINFO
-
-echo .
-echo mk1mf.pl options: %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET%
-echo .
-perl util\mk1mf.pl %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET% >%NLM_MAKE%
-
-make -f %NLM_MAKE% vclean
-echo .
-echo The makefile "%NLM_MAKE%" has been created use your maketool to
-echo build (ex: make -f %NLM_MAKE%)
-goto end
-
-rem ===============================================================
-rem
-:no_target
-echo .
-echo .  No build target specified!!!
-echo .
-echo .  usage: build [target] [debug opts] [assembly opts] [configure opts]
-echo .
-echo .     target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
-echo .                   - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
-echo .                   - "netware-libc" - LibC NetWare build (WinSock Sockets)
-echo .                   - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
-echo .
-echo .     debug opts    - "debug"  - build debug
-echo .
-echo .     assembly opts - "nw-mwasm" - use Metrowerks assembler
-echo .                     "nw-nasm"  - use NASM assembler
-echo .                     "no-asm"   - don't use assembly
-echo .
-echo .     configure opts- all unrecognized arguments are passed to the
-echo .                      perl configure script
-echo .
-echo .  If no debug or assembly opts are specified the default is to build
-echo .  non-debug without assembly
-echo .
-
-        
-:end        

Netware/cpy_tests.bat

@@ -1,113 +0,0 @@
-@echo off
-
-rem   Batch file to copy OpenSSL stuff to a NetWare server for testing
-
-rem   This batch file will create an "opensssl" directory at the root of the
-rem   specified NetWare drive and copy the required files to run the tests.
-rem   It should be run from inside the "openssl\netware" subdirectory.
-
-rem   Usage:
-rem      cpy_tests.bat <test subdirectory> <NetWare drive>
-rem          <test subdirectory> - out_nw.dbg | out_nw
-rem          <NetWare drive> - any mapped drive letter
-rem
-rem      example ( copy from debug build to m: dirve ):
-rem              cpy_tests.bat out_nw.dbg m:
-rem
-rem      CAUTION:  If a directory named OpenSSL exists on the target drive
-rem                it will be deleted first.
-
-
-if "%1" == "" goto usage
-if "%2" == "" goto usage
-
-rem   Assume running in \openssl directory unless cpy_tests.bat exists then
-rem   it must be the \openssl\netware directory
-set loc=.
-if exist cpy_tests.bat set loc=..
-
-rem   make sure the local build subdirectory specified is valid
-if not exist %loc%\%1\NUL goto invalid_dir
-
-rem   make sure target drive is valid
-if not exist %2\NUL goto invalid_drive
-
-rem   If an OpenSSL directory exists on the target drive, remove it
-if exist %2\openssl\NUL goto remove_openssl
-goto do_copy
-
-:remove_openssl
-echo .
-echo OpenSSL directory exists on %2 - it will be removed!
-pause
-rmdir %2\openssl /s /q
-
-:do_copy
-rem   make an "openssl" directory and others at the root of the NetWare drive
-mkdir %2\openssl
-mkdir %2\openssl\test_out
-mkdir %2\openssl\apps
-mkdir %2\openssl\certs
-mkdir %2\openssl\test
-
-
-rem   copy the test nlms
-copy %loc%\%1\*.nlm %2\openssl\
-
-rem   copy the test perl script
-copy %loc%\netware\do_tests.pl %2\openssl\
-
-rem   copy the certs directory stuff
-xcopy %loc%\certs\*.*         %2\openssl\certs\ /s
-
-rem   copy the test directory stuff
-copy %loc%\test\CAss.cnf      %2\openssl\test\
-copy %loc%\test\Uss.cnf       %2\openssl\test\
-copy %loc%\test\pkcs7.pem     %2\openssl\test\
-copy %loc%\test\pkcs7-1.pem   %2\openssl\test\
-copy %loc%\test\testcrl.pem   %2\openssl\test\
-copy %loc%\test\testp7.pem    %2\openssl\test\
-copy %loc%\test\testreq2.pem  %2\openssl\test\
-copy %loc%\test\testrsa.pem   %2\openssl\test\
-copy %loc%\test\testsid.pem   %2\openssl\test\
-copy %loc%\test\testx509.pem  %2\openssl\test\
-copy %loc%\test\v3-cert1.pem  %2\openssl\test\
-copy %loc%\test\v3-cert2.pem  %2\openssl\test\
-copy %loc%\crypto\evp\evptests.txt %2\openssl\test\
-
-rem   copy the apps directory stuff
-copy %loc%\apps\client.pem    %2\openssl\apps\
-copy %loc%\apps\server.pem    %2\openssl\apps\
-copy %loc%\apps\openssl.cnf   %2\openssl\apps\
-
-echo .
-echo Tests copied
-echo Run the test script at the console by typing:
-echo     "Perl \openssl\do_tests.pl"
-echo .
-echo Make sure the Search path includes the OpenSSL subdirectory
-
-goto end
-
-:invalid_dir
-echo.
-echo Invalid build directory specified: %1
-echo.
-goto usage
-
-:invalid_drive
-echo.
-echo Invalid drive: %2
-echo.
-goto usage
-
-:usage
-echo.
-echo usage: cpy_tests.bat [test subdirectory] [NetWare drive]
-echo     [test subdirectory] - out_nw_clib.dbg, out_nw_libc.dbg, etc. 
-echo     [NetWare drive]     - any mapped drive letter
-echo.
-echo example: cpy_test out_nw_clib.dbg M:
-echo  (copy from clib debug build area to M: drive)
-
-:end

Netware/do_tests.pl

@@ -1,624 +0,0 @@
-# perl script to run OpenSSL tests
-
-
-my $base_path      = "\\openssl";
-
-my $output_path    = "$base_path\\test_out";
-my $cert_path      = "$base_path\\certs";
-my $test_path      = "$base_path\\test";
-my $app_path       = "$base_path\\apps";
-
-my $tmp_cert       = "$output_path\\cert.tmp";
-my $OpenSSL_config = "$app_path\\openssl.cnf";
-my $log_file       = "$output_path\\tests.log";
-
-my $pause = 0;
-
-
-#  process the command line args to see if they wanted us to pause
-#  between executing each command
-foreach $i (@ARGV)
-{
-   if ($i =~ /^-p$/)
-   { $pause=1; }
-}
-
-
-
-main();
-
-
-############################################################################
-sub main()
-{
-   # delete all the output files in the output directory
-   unlink <$output_path\\*.*>;
-
-   # open the main log file
-   open(OUT, ">$log_file") || die "unable to open $log_file\n";
-
-   print( OUT "========================================================\n");
-   my $outFile = "$output_path\\version.out";
-   system("openssl2 version (CLIB_OPT)/>$outFile");
-   log_output("CHECKING FOR OPENSSL VERSION:", $outFile);
-
-   algorithm_tests();
-   encryption_tests();
-   evp_tests();
-   pem_tests();
-   verify_tests();
-   ca_tests();
-   ssl_tests();
-
-   close(OUT);
-
-   print("\nCompleted running tests.\n\n");
-   print("Check log file for errors: $log_file\n");
-}
-
-############################################################################
-sub algorithm_tests
-{
-   my $i;
-   my $outFile;
-   my @tests = ( rsa_test, destest, ideatest, bftest, bntest, shatest, sha1test,
-                 sha256t, sha512t, dsatest, md2test, md4test, md5test, mdc2test,
-                 rc2test, rc4test, rc5test, randtest, rmdtest, dhtest, ecdhtest,
-                 ecdsatest, ectest, exptest, casttest, hmactest );
-
-   print( "\nRUNNING CRYPTO ALGORITHM TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "CRYPTO ALGORITHM TESTS:\n\n");
-
-   foreach $i (@tests)
-   {
-      if (-e "$base_path\\$i.nlm")
-      {
-         $outFile = "$output_path\\$i.out";
-         system("$i (CLIB_OPT)/>$outFile");
-         log_desc("Test: $i\.nlm:");
-         log_output("", $outFile );
-      }
-      else
-      {
-         log_desc("Test: $i\.nlm: file not found");
-      }
-   }
-}
-
-############################################################################
-sub encryption_tests
-{
-   my $i;
-   my $outFile;
-   my @enc_tests = ( "enc", "rc4", "des-cfb", "des-ede-cfb", "des-ede3-cfb",
-                     "des-ofb", "des-ede-ofb", "des-ede3-ofb",
-                     "des-ecb", "des-ede", "des-ede3", "des-cbc",
-                     "des-ede-cbc", "des-ede3-cbc", "idea-ecb", "idea-cfb",
-                     "idea-ofb", "idea-cbc", "rc2-ecb", "rc2-cfb",
-                     "rc2-ofb", "rc2-cbc", "bf-ecb", "bf-cfb",
-                     "bf-ofb", "bf-cbc" );
-
-   my $input = "$base_path\\do_tests.pl";
-   my $cipher = "$output_path\\cipher.out";
-   my $clear = "$output_path\\clear.out";
-
-   print( "\nRUNNING ENCRYPTION & DECRYPTION TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "FILE ENCRYPTION & DECRYPTION TESTS:\n\n");
-
-   foreach $i (@enc_tests)
-   {
-      log_desc("Testing: $i");
-
-      # do encryption
-      $outFile = "$output_path\\enc.out";
-      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile" );
-      log_output("Encrypting: $input --> $cipher", $outFile);
-
-      # do decryption
-      $outFile = "$output_path\\dec.out";
-      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
-      log_output("Decrypting: $cipher --> $clear", $outFile);
-
-      # compare files
-      $x = compare_files( $input, $clear, 1);
-      if ( $x == 0 )
-      {
-         print( "\rSUCCESS - files match: $input, $clear\n");
-         print( OUT "SUCCESS - files match: $input, $clear\n");
-      }
-      else
-      {
-         print( "\rERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-
-      do_wait();
-
-      # Now do the same encryption but use Base64
-
-      # do encryption B64
-      $outFile = "$output_path\\B64enc.out";
-      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile");
-      log_output("Encrypting(B64): $cipher --> $clear", $outFile);
-
-      # do decryption B64
-      $outFile = "$output_path\\B64dec.out";
-      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
-      log_output("Decrypting(B64): $cipher --> $clear", $outFile);
-
-      # compare files
-      $x = compare_files( $input, $clear, 1);
-      if ( $x == 0 )
-      {
-         print( "\rSUCCESS - files match: $input, $clear\n");
-         print( OUT "SUCCESS - files match: $input, $clear\n");
-      }
-      else
-      {
-         print( "\rERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-
-      do_wait();
-
-   } # end foreach
-
-   # delete the temporary files
-   unlink($cipher);
-   unlink($clear);
-}
-
-
-############################################################################
-sub pem_tests
-{
-   my $i;
-   my $tmp_out;
-   my $outFile = "$output_path\\pem.out";
-
-   my %pem_tests = (
-         "crl"      => "testcrl.pem",
-          "pkcs7"   => "testp7.pem",
-          "req"     => "testreq2.pem",
-          "rsa"     => "testrsa.pem",
-          "x509"    => "testx509.pem",
-          "x509"    => "v3-cert1.pem",
-          "sess_id" => "testsid.pem"  );
-
-
-   print( "\nRUNNING PEM TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "PEM TESTS:\n\n");
-
-   foreach $i (keys(%pem_tests))
-   {
-      log_desc( "Testing: $i");
-
-      my $input = "$test_path\\$pem_tests{$i}";
-
-      $tmp_out = "$output_path\\$pem_tests{$i}";
-
-      if ($i ne "req" )
-      {
-         system("openssl2 $i -in $input -out $tmp_out (CLIB_OPT)/>$outFile");
-         log_output( "openssl2 $i -in $input -out $tmp_out", $outFile);
-      }
-      else
-      {
-         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config (CLIB_OPT)/>$outFile");
-         log_output( "openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config", $outFile );
-      }
-
-      $x = compare_files( $input, $tmp_out);
-      if ( $x == 0 )
-      {
-         print( "\rSUCCESS - files match: $input, $tmp_out\n");
-         print( OUT "SUCCESS - files match: $input, $tmp_out\n");
-      }
-      else
-      {
-         print( "\rERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-      do_wait();
-
-   } # end foreach
-}
-
-
-############################################################################
-sub verify_tests
-{
-   my $i;
-   my $outFile = "$output_path\\verify.out";
-
-   $cert_path =~ s/\\/\//g;
-   my @cert_files = <$cert_path/*.pem>;
-
-   print( "\nRUNNING VERIFY TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "VERIFY TESTS:\n\n");
-
-   make_tmp_cert_file();
-
-   foreach $i (@cert_files)
-   {
-      system("openssl2 verify -CAfile $tmp_cert $i (CLIB_OPT)/>$outFile");
-      log_desc("Verifying cert: $i");
-      log_output("openssl2 verify -CAfile $tmp_cert $i", $outFile);
-   }
-}
-
-
-############################################################################
-sub ssl_tests
-{
-   my $outFile = "$output_path\\ssl_tst.out";
-   my($CAcert) = "$output_path\\certCA.ss";
-   my($Ukey)   = "$output_path\\keyU.ss";
-   my($Ucert)  = "$output_path\\certU.ss";
-   my($ssltest)= "ssltest -key $Ukey -cert $Ucert -c_key $Ukey -c_cert $Ucert -CAfile $CAcert";
-
-   print( "\nRUNNING SSL TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "SSL TESTS:\n\n");
-
-   system("ssltest -ssl2 (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2:");
-   log_output("ssltest -ssl2", $outFile);
-
-   system("$ssltest -ssl2 -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with server authentication:");
-   log_output("$ssltest -ssl2 -server_auth", $outFile);
-
-   system("$ssltest -ssl2 -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with client authentication:");
-   log_output("$ssltest -ssl2 -client_auth", $outFile);
-
-   system("$ssltest -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with both client and server authentication:");
-   log_output("$ssltest -ssl2 -server_auth -client_auth", $outFile);
-
-   system("ssltest -ssl3 (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3:");
-   log_output("ssltest -ssl3", $outFile);
-
-   system("$ssltest -ssl3 -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with server authentication:");
-   log_output("$ssltest -ssl3 -server_auth", $outFile);
-
-   system("$ssltest -ssl3 -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with client authentication:");
-   log_output("$ssltest -ssl3 -client_auth", $outFile);
-
-   system("$ssltest -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with both client and server authentication:");
-   log_output("$ssltest -ssl3 -server_auth -client_auth", $outFile);
-
-   system("ssltest (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3:");
-   log_output("ssltest", $outFile);
-
-   system("$ssltest -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with server authentication:");
-   log_output("$ssltest -server_auth", $outFile);
-
-   system("$ssltest -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with client authentication:");
-   log_output("$ssltest -client_auth ", $outFile);
-
-   system("$ssltest -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with both client and server authentication:");
-   log_output("$ssltest -server_auth -client_auth", $outFile);
-
-   system("ssltest -bio_pair -ssl2 (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 via BIO pair:");
-   log_output("ssltest -bio_pair -ssl2", $outFile);
-
-   system("ssltest -bio_pair -dhe1024dsa -v (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
-   log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
-
-   system("$ssltest -bio_pair -ssl2 -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl2 -server_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl2 -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with client authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl2 -client_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl2 -server_auth -client_auth", $outFile);
-
-   system("ssltest -bio_pair -ssl3 (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 via BIO pair:");
-   log_output("ssltest -bio_pair -ssl3", $outFile);
-
-   system("$ssltest -bio_pair -ssl3 -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl3 -server_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl3 -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with client authentication  via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl3 -client_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with both client and server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl3 -server_auth -client_auth", $outFile);
-
-   system("ssltest -bio_pair (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 via BIO pair:");
-   log_output("ssltest -bio_pair", $outFile);
-
-   system("$ssltest -bio_pair -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -server_auth", $outFile);
-
-   system("$ssltest -bio_pair -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with client authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -client_auth", $outFile);
-
-   system("$ssltest -bio_pair -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with both client and server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -server_auth -client_auth", $outFile);
-}
-
-
-############################################################################
-sub ca_tests
-{
-   my $outFile = "$output_path\\ca_tst.out";
-
-   my($CAkey)     = "$output_path\\keyCA.ss";
-   my($CAcert)    = "$output_path\\certCA.ss";
-   my($CAserial)  = "$output_path\\certCA.srl";
-   my($CAreq)     = "$output_path\\reqCA.ss";
-   my($CAreq2)    = "$output_path\\req2CA.ss";
-
-   my($CAconf)    = "$test_path\\CAss.cnf";
-
-   my($Uconf)     = "$test_path\\Uss.cnf";
-
-   my($Ukey)      = "$output_path\\keyU.ss";
-   my($Ureq)      = "$output_path\\reqU.ss";
-   my($Ucert)     = "$output_path\\certU.ss";
-
-   print( "\nRUNNING CA TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "CA TESTS:\n");
-
-   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new (CLIB_OPT)/>$outFile");
-   log_desc("Make a certificate request using req:");
-   log_output("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new", $outFile);
-
-   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey (CLIB_OPT)/>$outFile");
-   log_desc("Convert the certificate request into a self signed certificate using x509:");
-   log_output("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey", $outFile);
-
-   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 (CLIB_OPT)/>$outFile");
-   log_desc("Convert a certificate into a certificate request using 'x509':");
-   log_output("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2", $outFile);
-
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout (CLIB_OPT)/>$outFile");
-   log_output("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout", $outFile);
-
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout (CLIB_OPT)/>$outFile");
-   log_output( "openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout", $outFile);
-
-   system("openssl2 verify -CAfile $CAcert $CAcert (CLIB_OPT)/>$outFile");
-   log_output("openssl2 verify -CAfile $CAcert $CAcert", $outFile);
-
-   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new (CLIB_OPT)/>$outFile");
-   log_desc("Make another certificate request using req:");
-   log_output("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new", $outFile);
-
-   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial (CLIB_OPT)/>$outFile");
-   log_desc("Sign certificate request with the just created CA via x509:");
-   log_output("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial", $outFile);
-
-   system("openssl2 verify -CAfile $CAcert $Ucert (CLIB_OPT)/>$outFile");
-   log_output("openssl2 verify -CAfile $CAcert $Ucert", $outFile);
-
-   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert (CLIB_OPT)/>$outFile");
-   log_desc("Certificate details");
-   log_output("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert", $outFile);
-
-   print(OUT "--\n");
-   print(OUT "The generated CA certificate is $CAcert\n");
-   print(OUT "The generated CA private key is $CAkey\n");
-   print(OUT "The current CA signing serial number is in $CAserial\n");
-
-   print(OUT "The generated user certificate is $Ucert\n");
-   print(OUT "The generated user private key is $Ukey\n");
-   print(OUT "--\n");
-}
-
-############################################################################
-sub evp_tests
-{
-   my $i = 'evp_test';
-
-   print( "\nRUNNING EVP TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "EVP TESTS:\n\n");
-
-   if (-e "$base_path\\$i.nlm")
-   {
-       my $outFile = "$output_path\\$i.out";
-       system("$i $test_path\\evptests.txt (CLIB_OPT)/>$outFile");
-       log_desc("Test: $i\.nlm:");
-       log_output("", $outFile );
-   }
-   else
-   {
-       log_desc("Test: $i\.nlm: file not found");
-   }
-}
-
-############################################################################
-sub log_output( $ $ )
-{
-   my( $desc, $file ) = @_;
-   my($error) = 0;
-   my($key);
-   my($msg);
-
-   if ($desc)
-   {
-      print("\r$desc\n");
-      print(OUT "$desc\n");
-   }
-
-      # loop waiting for test program to complete
-   while ( stat($file) == 0)
-      { print(". "); sleep(1); }
-
-
-      # copy test output to log file
-   open(IN, "<$file");
-   while (<IN>)
-   {
-      print(OUT $_);
-      if ( $_ =~ /ERROR/ )
-      {
-         $error = 1;
-      }
-   }
-      # close and delete the temporary test output file
-   close(IN);
-   unlink($file);
-
-   if ( $error == 0 )
-   {
-      $msg = "Test Succeeded";
-   }
-   else
-   {
-      $msg = "Test Failed";
-   }
-
-   print(OUT "$msg\n");
-
-   if ($pause)
-   {
-      print("$msg - press ENTER to continue...");
-      $key = getc;
-      print("\n");
-   }
-
-      # Several of the testing scripts run a loop loading the
-      # same NLM with different options.
-      # On slow NetWare machines there appears to be some delay in the
-      # OS actually unloading the test nlms and the OS complains about.
-      # the NLM already being loaded.  This additional pause is to
-      # to help provide a little more time for unloading before trying to
-      # load again.
-   sleep(1);
-}
-
-
-############################################################################
-sub log_desc( $ )
-{
-   my( $desc ) = @_;
-
-   print("\n");
-   print("$desc\n");
-
-   print(OUT "\n");
-   print(OUT "$desc\n");
-   print(OUT "======================================\n");
-}
-
-############################################################################
-sub compare_files( $ $ $ )
-{
-   my( $file1, $file2, $binary ) = @_;
-   my( $n1, $n2, $b1, $b2 );
-   my($ret) = 1;
-
-   open(IN0, $file1) || die "\nunable to open $file1\n";
-   open(IN1, $file2) || die "\nunable to open $file2\n";
-
-  if ($binary)
-  {
-      binmode IN0;
-      binmode IN1;
-  }
-
-   for (;;)
-   {
-      $n1 = read(IN0, $b1, 512);
-      $n2 = read(IN1, $b2, 512);
-
-      if ($n1 != $n2) {last;}
-      if ($b1 != $b2) {last;}
-
-      if ($n1 == 0)
-      {
-         $ret = 0;
-         last;
-      }
-   }
-   close(IN0);
-   close(IN1);
-   return($ret);
-}
-
-############################################################################
-sub do_wait()
-{
-   my($key);
-
-   if ($pause)
-   {
-      print("Press ENTER to continue...");
-      $key = getc;
-      print("\n");
-   }
-}
-
-
-############################################################################
-sub make_tmp_cert_file()
-{
-   my @cert_files = <$cert_path/*.pem>;
-
-      # delete the file if it already exists
-   unlink($tmp_cert);
-
-   open( TMP_CERT, ">$tmp_cert") || die "\nunable to open $tmp_cert\n";
-
-   print("building temporary cert file\n");
-
-   # create a temporary cert file that contains all the certs
-   foreach $i (@cert_files)
-   {
-      open( IN_CERT, $i ) || die "\nunable to open $i\n";
-
-      for(;;)
-      {
-         $n = sysread(IN_CERT, $data, 1024);
-
-         if ($n == 0)
-         {
-            close(IN_CERT);
-            last;
-         };
-
-         syswrite(TMP_CERT, $data, $n);
-      }
-   }
-
-   close( TMP_CERT );
-}

Netware/globals.txt

@@ -1,254 +0,0 @@
-An initial review of the OpenSSL code was done to determine how many 
-global variables where present.  The idea was to determine the amount of 
-work required to pull the globals into an instance data structure in 
-order to build a Library NLM for NetWare.  This file contains the results 
-of the review.  Each file is listed along with the globals in the file.  
-The initial review was done very quickly so this list is probably
-not a comprehensive list.
-
-
-cryptlib.c
-===========================================
-
-static STACK *app_locks=NULL;
-
-static STACK_OF(CRYPTO_dynlock) *dyn_locks=NULL;
-
-static void (MS_FAR *locking_callback)(int mode,int type,
-   const char *file,int line)=NULL;
-static int (MS_FAR *add_lock_callback)(int *pointer,int amount,
-   int type,const char *file,int line)=NULL;
-static unsigned long (MS_FAR *id_callback)(void)=NULL;
-static struct CRYPTO_dynlock_value *(MS_FAR *dynlock_create_callback)
-   (const char *file,int line)=NULL;
-static void (MS_FAR *dynlock_lock_callback)(int mode,
-   struct CRYPTO_dynlock_value *l, const char *file,int line)=NULL;
-static void (MS_FAR *dynlock_destroy_callback)(struct CRYPTO_dynlock_value *l,
-   const char *file,int line)=NULL;
-
-
-mem.c
-===========================================
-static int allow_customize = 1;      /* we provide flexible functions for */
-static int allow_customize_debug = 1;/* exchanging memory-related functions at
-
-/* may be changed as long as `allow_customize' is set */
-static void *(*malloc_locked_func)(size_t)  = malloc;
-static void (*free_locked_func)(void *)     = free;
-static void *(*malloc_func)(size_t)         = malloc;
-static void *(*realloc_func)(void *, size_t)= realloc;
-static void (*free_func)(void *)            = free;
-
-/* use default functions from mem_dbg.c */
-static void (*malloc_debug_func)(void *,int,const char *,int,int)
-   = CRYPTO_dbg_malloc;
-static void (*realloc_debug_func)(void *,void *,int,const char *,int,int)
-   = CRYPTO_dbg_realloc;
-static void (*free_debug_func)(void *,int) = CRYPTO_dbg_free;
-static void (*set_debug_options_func)(long) = CRYPTO_dbg_set_options;
-static long (*get_debug_options_func)(void) = CRYPTO_dbg_get_options;
-
-
-mem_dbg.c
-===========================================
-static int mh_mode=CRYPTO_MEM_CHECK_OFF;
-static unsigned long order = 0; /* number of memory requests */
-static LHASH *mh=NULL; /* hash-table of memory requests (address as key) */
-
-static LHASH *amih=NULL; /* hash-table with those app_mem_info_st's */
-static long options =             /* extra information to be recorded */
-static unsigned long disabling_thread = 0;
-
-
-err.c
-===========================================
-static LHASH *error_hash=NULL;
-static LHASH *thread_hash=NULL;
-
-several files have routines with static "init" to track if error strings
-   have been loaded ( may not want seperate error strings for each process )
-   The "init" variable can't be left "global" because the error has is a ptr
-   that is malloc'ed.  The malloc'ed error has is dependant on the "init"
-   vars.
-
-   files:
-      pem_err.c
-      cpt_err.c
-      pk12err.c
-      asn1_err.c
-      bio_err.c
-      bn_err.c
-      buf_err.c
-      comp_err.c
-      conf_err.c
-      cpt_err.c
-      dh_err.c
-      dsa_err.c
-      dso_err.c
-      evp_err.c
-      obj_err.c
-      pkcs7err.c
-      rand_err.c
-      rsa_err.c
-      rsar_err.c
-      ssl_err.c
-      x509_err.c
-      v3err.c
-		err.c
-
-These file have similar "init" globals but they are for other stuff not
-error strings:
-
-		bn_lib.c
-		ecc_enc.c
-		s23_clnt.c
-		s23_meth.c
-		s23_srvr.c
-		s2_clnt.c
-		s2_lib.c
-		s2_meth.c
-		s2_srvr.c
-		s3_clnt.c
-		s3_lib.c
-		s3_srvr.c
-		t1_clnt.c
-		t1_meth.c
-		t1_srvr.c
-
-rand_lib.c
-===========================================
-static RAND_METHOD *rand_meth= &rand_ssleay_meth;
-
-md_rand.c
-===========================================
-static int state_num=0,state_index=0;
-static unsigned char state[STATE_SIZE+MD_DIGEST_LENGTH];
-static unsigned char md[MD_DIGEST_LENGTH];
-static long md_count[2]={0,0};
-static double entropy=0;
-static int initialized=0;
-
-/* This should be set to 1 only when ssleay_rand_add() is called inside
-   an already locked state, so it doesn't try to lock and thereby cause
-   a hang.  And it should always be reset back to 0 before unlocking. */
-static int add_do_not_lock=0;
-
-obj_dat.c
-============================================
-static int new_nid=NUM_NID;
-static LHASH *added=NULL;
-
-b_sock.c
-===========================================
-static unsigned long BIO_ghbn_hits=0L;
-static unsigned long BIO_ghbn_miss=0L;
-static struct ghbn_cache_st
-   {
-   char name[129];
-   struct hostent *ent;
-   unsigned long order;
-   } ghbn_cache[GHBN_NUM];
-
-static int wsa_init_done=0;
-
-
-bio_lib.c
-===========================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *bio_meth=NULL;
-static int bio_meth_num=0;
-
-
-bn_lib.c
-========================================
-static int bn_limit_bits=0;
-static int bn_limit_num=8;        /* (1<<bn_limit_bits) */
-static int bn_limit_bits_low=0;
-static int bn_limit_num_low=8;    /* (1<<bn_limit_bits_low) */
-static int bn_limit_bits_high=0;
-static int bn_limit_num_high=8;   /* (1<<bn_limit_bits_high) */
-static int bn_limit_bits_mont=0;
-static int bn_limit_num_mont=8;   /* (1<<bn_limit_bits_mont) */
-
-conf_lib.c
-========================================
-static CONF_METHOD *default_CONF_method=NULL;
-
-dh_lib.c
-========================================
-static DH_METHOD *default_DH_method;
-static int dh_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dh_meth = NULL;
-
-dsa_lib.c
-========================================
-static DSA_METHOD *default_DSA_method;
-static int dsa_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dsa_meth = NULL;
-
-dso_lib.c
-========================================
-static DSO_METHOD *default_DSO_meth = NULL;
-
-rsa_lib.c
-========================================
-static RSA_METHOD *default_RSA_meth=NULL;
-static int rsa_meth_num=0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *rsa_meth=NULL;
-
-x509_trs.c
-=======================================
-static int (*default_trust)(int id, X509 *x, int flags) = obj_trust;
-static STACK_OF(X509_TRUST) *trtable = NULL;
-
-x509_req.c
-=======================================
-static int *ext_nids = ext_nid_list;
-
-o_names.c
-======================================
-static LHASH *names_lh=NULL;
-static STACK_OF(NAME_FUNCS) *name_funcs_stack;
-static int free_type;
-static int names_type_num=OBJ_NAME_TYPE_NUM;
-
-
-th-lock.c - NEED to add support for locking for NetWare
-==============================================
-static long *lock_count;
-(other platform specific globals)
-
-x_x509.c
-==============================================
-static int x509_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_meth = NULL;
-
-
-evp_pbe.c
-============================================
-static STACK *pbe_algs;
-
-evp_key.c
-============================================
-static char prompt_string[80];
-
-ssl_ciph.c
-============================================
-static STACK_OF(SSL_COMP) *ssl_comp_methods=NULL;
-
-ssl_lib.c
-=============================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_meth=NULL;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_ctx_meth=NULL;
-static int ssl_meth_num=0;
-static int ssl_ctx_meth_num=0;
-
-ssl_sess.c
-=============================================
-static int ssl_session_num=0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_session_meth=NULL;
-
-x509_vfy.c
-============================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_store_ctx_method=NULL;
-static int x509_store_ctx_num=0;
-

Netware/readme.txt

@@ -1,19 +0,0 @@
-
-Contents of the openssl\netware directory
-==========================================
-
-Regular files:
-
-readme.txt     - this file
-do_tests.pl    - perl script used to run the OpenSSL tests on NetWare
-cpy_tests.bat  - batch to to copy test stuff to NetWare server
-build.bat      - batch file to help with builds
-set_env.bat    - batch file to help setup build environments
-globals.txt    - results of initial code review to identify OpenSSL global variables
-
-
-The following files are generated by the various scripts.  They are
-recreated each time and it is okay to delete them.
-
-*.def - command files used by Metrowerks linker
-*.mak - make files generated by mk1mf.pl

Netware/set_env.bat

@@ -1,112 +0,0 @@
-@echo off
-
-rem ========================================================================
-rem   Batch file to assist in setting up the necessary enviroment for
-rem   building OpenSSL for NetWare.
-rem
-rem   usage:
-rem      set_env [target]
-rem
-rem      target      - "netware-clib" - Clib build
-rem                  - "netware-libc" - LibC build
-rem
-rem
-
-if "a%1" == "a" goto usage
-               
-set LIBC_BUILD=
-set CLIB_BUILD=
-set GNUC=
-
-if "%1" == "netware-clib" set CLIB_BUILD=Y
-if "%1" == "netware-clib" set LIBC_BUILD=
-
-if "%1" == "netware-libc" set LIBC_BUILD=Y
-if "%1" == "netware-libc" set CLIB_BUILD=
-
-if "%2" == "gnuc" set GNUC=Y
-if "%2" == "codewarrior" set GNUC=
-
-rem   Location of tools (compiler, linker, etc)
-if "%NDKBASE%" == "" set NDKBASE=c:\Novell
-
-rem   If Perl for Win32 is not already in your path, add it here
-set PERL_PATH=
-
-rem   Define path to the Metrowerks command line tools
-rem   or GNU Crosscompiler gcc / nlmconv
-rem   ( compiler, assembler, linker)
-if "%GNUC%" == "Y" set COMPILER_PATH=c:\usr\i586-netware\bin;c:\usr\bin
-if "%GNUC%" == "" set COMPILER_PATH=c:\prg\cwcmdl40
-
-rem   If using gnu make define path to utility
-rem set GNU_MAKE_PATH=%NDKBASE%\gnu
-set GNU_MAKE_PATH=c:\prg\tools
-
-rem   If using ms nmake define path to nmake
-rem set MS_NMAKE_PATH=%NDKBASE%\msvc\600\bin
-
-rem   If using NASM assembler define path
-rem set NASM_PATH=%NDKBASE%\nasm
-set NASM_PATH=c:\prg\tools
-
-rem   Update path to include tool paths
-set path=%path%;%COMPILER_PATH%
-if not "%GNU_MAKE_PATH%" == "" set path=%path%;%GNU_MAKE_PATH%
-if not "%MS_NMAKE_PATH%" == "" set path=%path%;%MS_NMAKE_PATH%
-if not "%NASM_PATH%"     == "" set path=%path%;%NASM_PATH%
-if not "%PERL_PATH%"     == "" set path=%path%;%PERL_PATH%
-
-rem   Set INCLUDES to location of Novell NDK includes
-if "%LIBC_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\libc\include;%NDKBASE%\ndk\libc\include\winsock
-if "%CLIB_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\nwsdk\include\nlm;%NDKBASE%\ws295sdk\include
-
-rem   Set Imports to location of Novell NDK import files
-if "%LIBC_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\libc\imports
-if "%CLIB_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\nwsdk\imports
-
-rem   Set PRELUDE to the absolute path of the prelude object to link with in
-rem   the Metrowerks NetWare PDK - NOTE: for Clib builds "clibpre.o" is 
-rem   recommended, for LibC NKS builds libcpre.o must be used
-if "%GNUC%" == "Y" goto gnuc
-if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.o
-rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.o
-if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.o
-echo using MetroWerks CodeWarrior 
-goto info
-
-:gnuc
-if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.gcc.o
-rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.gcc.o
-if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.gcc.o
-echo using GNU GCC Compiler 
-
-:info
-echo.
-
-if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
-if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
-
-if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
-if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
-
-goto end
-
-:usage
-rem ===============================================================
-echo.
-echo No target build specified!
-echo.
-echo usage: set_env [target] [compiler]
-echo.
-echo target      - "netware-clib" - Clib build
-echo             - "netware-libc" - LibC build
-echo.
-echo compiler    - "gnuc"         - GNU GCC Compiler
-echo             - "codewarrior"  - MetroWerks CodeWarrior (default)
-echo.
-
-:end
-echo.
-
-

PROBLEMS

@@ -12,8 +12,8 @@ along the whole library path before it bothers looking for .a libraries.  This
 means that -L switches won't matter unless OpenSSL is built with shared
 library support.
 
-The workaround may be to change the following lines in apps/Makefile and
-test/Makefile:
+The workaround may be to change the following lines in apps/Makefile.ssl and
+test/Makefile.ssl:
 
   LIBCRYPTO=-L.. -lcrypto
   LIBSSL=-L.. -lssl
@@ -36,9 +36,7 @@ may differ on your machine.
 
 
 As long as Apple doesn't fix the problem with ld, this problem building
-OpenSSL will remain as is. Well, the problem was addressed in 0.9.8f by
-passing -Wl,-search_paths_first, but it's unknown if the flag was
-supported from the initial MacOS X release.
+OpenSSL will remain as is.
 
 
 * Parallell make leads to errors
@@ -50,150 +48,17 @@ will interfere with each other and lead to test failure.
 The solution is simple for now: don't run parallell make when testing.
 
 
-* Bugs in gcc triggered
+* Bugs in gcc 3.0 triggered
 
-- According to a problem report, there are bugs in gcc 3.0 that are
-  triggered by some of the code in OpenSSL, more specifically in
-  PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
+According to a problem report, there are bugs in gcc 3.0 that are
+triggered by some of the code in OpenSSL, more specifically in
+PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
 
 	header+=11;
 	if (*header != '4') return(0); header++;
 	if (*header != ',') return(0); header++;
 
-  What happens is that gcc might optimize a little too agressively, and
-  you end up with an extra incrementation when *header != '4'.
+What happens is that gcc might optimize a little too agressively, and
+you end up with an extra incrementation when *header != '4'.
 
-  We recommend that you upgrade gcc to as high a 3.x version as you can.
-
-- According to multiple problem reports, some of our message digest
-  implementations trigger bug[s] in code optimizer in gcc 3.3 for sparc64
-  and gcc 2.96 for ppc. Former fails to complete RIPEMD160 test, while
-  latter - SHA one.
-
-  The recomendation is to upgrade your compiler. This naturally applies to
-  other similar cases.
-
-- There is a subtle Solaris x86-specific gcc run-time environment bug, which
-  "falls between" OpenSSL [0.9.8 and later], Solaris ld and GCC. The bug
-  manifests itself as Segmentation Fault upon early application start-up.
-  The problem can be worked around by patching the environment according to
-  http://www.openssl.org/~appro/values.c.
-
-* solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
-
-As subject suggests SHA-1 might perform poorly (4 times slower)
-if compiled with WorkShop 6 compiler and -xarch=v9. The cause for
-this seems to be the fact that compiler emits multiplication to
-perform shift operations:-( To work the problem around configure
-with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'.
-
-* Problems with hp-parisc2-cc target when used with "no-asm" flag
-
-When using the hp-parisc2-cc target, wrong bignum code is generated.
-This is due to the SIXTY_FOUR_BIT build being compiled with the +O3
-aggressive optimization.
-The problem manifests itself by the BN_kronecker test hanging in an
-endless loop. Reason: the BN_kronecker test calls BN_generate_prime()
-which itself hangs. The reason could be tracked down to the bn_mul_comba8()
-function in bn_asm.c. At some occasions the higher 32bit value of r[7]
-is off by 1 (meaning: calculated=shouldbe+1). Further analysis failed,
-as no debugger support possible at +O3 and additional fprintf()'s
-introduced fixed the bug, therefore it is most likely a bug in the
-optimizer.
-The bug was found in the BN_kronecker test but may also lead to
-failures in other parts of the code.
-(See Ticket #426.)
-
-Workaround: modify the target to +O2 when building with no-asm.
-
-* Problems building shared libraries on SCO OpenServer Release 5.0.6
-  with gcc 2.95.3
-
-The symptoms appear when running the test suite, more specifically
-test/ectest, with the following result:
-
-OSSL_LIBPATH="`cd ..; pwd`"; LD_LIBRARY_PATH="$OSSL_LIBPATH:$LD_LIBRARY_PATH"; DYLD_LIBRARY_PATH="$OSSL_LIBPATH:$DYLD_LIBRARY_PATH"; SHLIB_PATH="$OSSL_LIBPATH:$SHLIB_PATH"; LIBPATH="$OSSL_LIBPATH:$LIBPATH"; if [ "debug-sco5-gcc" = "Cygwin" ]; then PATH="${LIBPATH}:$PATH"; fi; export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; ./ectest
-ectest.c:186: ABORT
-
-The cause of the problem seems to be that isxdigit(), called from
-BN_hex2bn(), returns 0 on a perfectly legitimate hex digit.  Further
-investigation shows that any of the isxxx() macros return 0 on any
-input.  A direct look in the information array that the isxxx() use,
-called __ctype, shows that it contains all zeroes...
-
-Taking a look at the newly created libcrypto.so with nm, one can see
-that the variable __ctype is defined in libcrypto's .bss (which
-explains why it is filled with zeroes):
-
-$ nm -Pg libcrypto.so | grep __ctype
-__ctype B 0011659c
-__ctype2 U         
-
-Curiously, __ctype2 is undefined, in spite of being declared in
-/usr/include/ctype.h in exactly the same way as __ctype.
-
-Any information helping to solve this issue would be deeply
-appreciated.
-
-NOTE: building non-shared doesn't come with this problem.
-
-* ULTRIX build fails with shell errors, such as "bad substitution"
-  and "test: argument expected"
-
-The problem is caused by ULTRIX /bin/sh supporting only original
-Bourne shell syntax/semantics, and the trouble is that the vast
-majority is so accustomed to more modern syntax, that very few
-people [if any] would recognize the ancient syntax even as valid.
-This inevitably results in non-trivial scripts breaking on ULTRIX,
-and OpenSSL isn't an exclusion. Fortunately there is workaround,
-hire /bin/ksh to do the job /bin/sh fails to do.
-
-1. Trick make(1) to use /bin/ksh by setting up following environ-
-   ment variables *prior* you execute ./Configure and make:
-
-	PROG_ENV=POSIX
-	MAKESHELL=/bin/ksh
-	export PROG_ENV MAKESHELL
-
-   or if your shell is csh-compatible:
-
-	setenv PROG_ENV POSIX
-	setenv MAKESHELL /bin/ksh
-
-2. Trick /bin/sh to use alternative expression evaluator. Create
-   following 'test' script for example in /tmp:
-
-	#!/bin/ksh
-	${0##*/} "$@"
-
-   Then 'chmod a+x /tmp/test; ln /tmp/test /tmp/[' and *prepend*
-   your $PATH with chosen location, e.g. PATH=/tmp:$PATH. Alter-
-   natively just replace system /bin/test and /bin/[ with the
-   above script.
-
-* hpux64-ia64-cc fails blowfish test.
-
-Compiler bug, presumably at particular patch level. It should be noted
-that same compiler generates correct 32-bit code, a.k.a. hpux-ia64-cc
-target. Drop optimization level to +O2 when compiling 64-bit bf_skey.o.
-
-* no-engines generates errors.
-
-Unfortunately, the 'no-engines' configuration option currently doesn't
-work properly.  Use 'no-hw' and you'll will at least get no hardware
-support.  We'll see how we fix that on OpenSSL versions past 0.9.8.
-
-* 'make test' fails in BN_sqr [commonly with "error 139" denoting SIGSEGV]
-  if elder GNU binutils were deployed to link shared libcrypto.so.
-
-As subject suggests the failure is caused by a bug in elder binutils,
-either as or ld, and was observed on FreeBSD and Linux. There are two
-options. First is naturally to upgrade binutils, the second one - to
-reconfigure with additional no-sse2 [or 386] option passed to ./config.
-
-* If configured with ./config no-dso, toolkit still gets linked with -ldl,
-  which most notably poses a problem when linking with dietlibc.
-
-We don't have framework to associate -ldl with no-dso, therefore the only
-way is to edit Makefile right after ./config no-dso and remove -ldl from
-EX_LIBS line.
+We recommend that you upgrade gcc to as high a 3.x version as you can.

README

@@ -1,7 +1,7 @@
 
- OpenSSL 1.1.0-dev
+ OpenSSL 0.9.8-dev XX xxx XXXX
 
- Copyright (c) 1998-2011 The OpenSSL Project
+ Copyright (c) 1998-2002 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
@@ -14,13 +14,13 @@
  protocols as well as a full-strength general purpose cryptography library.
  The project is managed by a worldwide community of volunteers that use the
  Internet to communicate, plan, and develop the OpenSSL toolkit and its
- related documentation.
+ related documentation. 
 
  OpenSSL is based on the excellent SSLeay library developed from Eric A. Young
  and Tim J. Hudson.  The OpenSSL toolkit is licensed under a dual-license (the
  OpenSSL license plus the SSLeay license) situation, which basically means
  that you are free to get and use it for commercial and non-commercial
- purposes as long as you fulfill the conditions of both licenses.
+ purposes as long as you fulfill the conditions of both licenses. 
 
  OVERVIEW
  --------
@@ -36,13 +36,12 @@
      actually logically part of it. It includes routines for the following:
 
      Ciphers
-        libdes - EAY's libdes DES encryption package which was floating
-                 around the net for a few years, and was then relicensed by
-                 him as part of SSLeay.  It includes 15 'modes/variations'
-                 of DES (1, 2 and 3 key versions of ecb, cbc, cfb and ofb;
-                 pcbc and a more general form of cfb and ofb) including desx
-                 in cbc mode, a fast crypt(3), and routines to read
-                 passwords from the keyboard.
+        libdes - EAY's libdes DES encryption package which has been floating
+                 around the net for a few years.  It includes 15
+                 'modes/variations' of DES (1, 2 and 3 key versions of ecb,
+                 cbc, cfb and ofb; pcbc and a more general form of cfb and
+                 ofb) including desx in cbc mode, a fast crypt(3), and
+                 routines to read passwords from the keyboard.
         RC4 encryption,
         RC2 encryption      - 4 different modes, ecb, cbc, cfb and ofb.
         Blowfish encryption - 4 different modes, ecb, cbc, cfb and ofb.
@@ -54,11 +53,11 @@
         MDC2 message digest. A DES based hash that is popular on smart cards.
 
      Public Key
-        RSA encryption/decryption/generation.
+        RSA encryption/decryption/generation.  
             There is no limit on the number of bits.
-        DSA encryption/decryption/generation.
+        DSA encryption/decryption/generation.   
             There is no limit on the number of bits.
-        Diffie-Hellman key-exchange/key generation.
+        Diffie-Hellman key-exchange/key generation.  
             There is no limit on the number of bits.
 
      X.509v3 certificates
@@ -81,16 +80,16 @@
         A simple stack.
         A Configuration loader that uses a format similar to MS .ini files.
 
- openssl:
+ openssl: 
      A command line tool that can be used for:
         Creation of RSA, DH and DSA key parameters
-        Creation of X.509 certificates, CSRs and CRLs
+        Creation of X.509 certificates, CSRs and CRLs 
         Calculation of Message Digests
         Encryption and Decryption with Ciphers
         SSL/TLS Client and Server Tests
         Handling of S/MIME signed or encrypted mail
 
-
+        
  PATENTS
  -------
 
@@ -105,17 +104,13 @@
  licensing conditions. Their web page is http://www.rsasecurity.com/.
 
  RC4 is a trademark of RSA Security, so use of this label should perhaps
- only be used with RSA Security's permission.
+ only be used with RSA Security's permission. 
 
  The IDEA algorithm is patented by Ascom in Austria, France, Germany, Italy,
  Japan, the Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They
  should be contacted if that algorithm is to be used; their web page is
  http://www.ascom.ch/.
 
- NTT and Mitsubishi have patents and pending patents on the Camellia
- algorithm, but allow use at no charge without requiring an explicit
- licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
-
  INSTALLATION
  ------------
 
@@ -134,19 +129,16 @@
  or application author.  We try to collect those in doc/PROBLEMS, with current
  thoughts on how they should be solved in a future of OpenSSL.
 
- SUPPORT
+ SUPPORT 
  -------
 
- See the OpenSSL website www.openssl.org for details of how to obtain
- commercial technical support.
-
  If you have any problems with OpenSSL then please take the following steps
  first:
 
     - Download the current snapshot from ftp://ftp.openssl.org/snapshot/
       to see if the problem has already been addressed
     - Remove ASM versions of libraries
-    - Remove compiler optimisation flags
+    - Remove compiler optimisation flags 
 
  If you wish to report a bug then please include the following information in
  any bug report:
@@ -162,14 +154,10 @@
     - Stack Traceback (if the application dumps core)
 
  Report the bug to the OpenSSL project via the Request Tracker
- (http://www.openssl.org/support/rt.html) by mail to:
+ (http://www.openssl.org/rt2.html) by mail to:
 
     openssl-bugs@openssl.org
 
- Note that the request tracker should NOT be used for general assistance
- or support queries. Just because something doesn't work the way you expect
- does not mean it is necessarily a bug in OpenSSL.
-
  Note that mail to openssl-bugs@openssl.org is recorded in the publicly
  readable request tracker database and is forwarded to a public
  mailing list. Confidential mail may be sent to openssl-security@openssl.org
@@ -180,34 +168,16 @@
 
  Development is coordinated on the openssl-dev mailing list (see
  http://www.openssl.org for information on subscribing). If you
- would like to submit a patch, send it to openssl-bugs@openssl.org with
+ would like to submit a patch, send it to openssl-dev@openssl.org with
  the string "[PATCH]" in the subject. Please be sure to include a
  textual explanation of what your patch does.
 
- If you are unsure as to whether a feature will be useful for the general
- OpenSSL community please discuss it on the openssl-dev mailing list first.
- Someone may be already working on the same thing or there may be a good
- reason as to why that feature isn't implemented.
-
- Patches should be as up to date as possible, preferably relative to the
- current CVS or the last snapshot. They should follow the coding style of
- OpenSSL and compile without warnings. Some of the core team developer targets
- can be used for testing purposes, (debug-steve64, debug-geoff etc). OpenSSL
- compiles on many varied platforms: try to ensure you only use portable
- features.
-
  Note: For legal reasons, contributions from the US can be accepted only
- if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
- (formerly BXA) with a copy to the ENC Encryption Request Coordinator;
- please take some time to look at
-    http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
- and
-    http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e))
- for the details. If "your encryption source code is too large to serve as
- an email attachment", they are glad to receive it by fax instead; hope you
- have a cheap long-distance plan.
+ if a TSA notification and a copy of the patch is sent to crypt@bis.doc.gov;
+ see http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
+ and http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e)).
 
- Our preferred format for changes is "diff -u" output. You might
+ The preferred format for changes is "diff -u" output. You might
  generate it like this:
 
  # cd openssl-work
@@ -215,4 +185,3 @@
  # ./Configure dist; make clean
  # cd ..
  # diff -ur openssl-orig openssl-work > mydiffs.patch
-

README.ECC

@@ -1,61 +0,0 @@
-NOTE: The OpenSSL Software Foundation has executed a sublicense agreement
-entitled "Elliptic Curve Cryptography Patent License Agreement" with the
-National Security Agency/ Central Security Service Commercial Solutions
-Center (NCSC) dated 2010-11-04. That agreement permits implementation and
-distribution of software containing features covered by any or all of the
-following patents:
-
-1.) U.S. Pat. No. 5,761,305 entitled "Key Agreement and Transport Protocol 
-    with Implicit Signatures" issued on June 2, 1998;
-2.) Can. Pat. Appl. Ser. No. 2176972 entitled "Key Agreement and Transport 
-    Protocol with Implicit Signature and Reduced Bandwidth" filed on May 
-    16, 1996;
-3.) U.S. Pat. No. 5,889,865 entitled "Key Agreement and Transport Protocol 
-    with Implicit Signatures" issued on March 30, 1999;
-4.) U.S. Pat. No. 5,896,455 entitled "Key Agreement and Transport Protocol 
-    with Implicit Signatures" issued on April 20, 1999;
-5.) U.S. Pat. No. 5,933,504 entitled "Strengthened Public Key Protocol" 
-    issued on August 3, 1999;
-6.) Can. Pat. Appl. Ser. No. 2176866 entitled "Strengthened Public Key 
-    Protocol" filed on May 17, 1996;
-7.) E.P. Pat. Appl. Ser. No. 96201322.3 entitled "Strengthened Public Key 
-    Protocol" filed on May 17, 1996;
-8.) U.S. Pat. No. 5,999,626 entitled "Digital Signatures on a Smartcard" 
-    issued on December 7, 1999;
-9.) Can. Pat. Appl. Ser. No. 2202566 entitled "Digital Signatures on a 
-    Smartcard" filed on April 14, 1997;
-10.) E.P. Pat. Appl. No. 97106114.8 entitled "Digital Signatures on a 
-     Smartcard" filed on April 15, 1997;
-11.) U.S Pat. No. 6,122,736 entitled "Key Agreement and Transport Protocol 
-     with Implicit Signatures" issued on September 19, 2000;
-12.) Can. Pat. Appl. Ser. No. 2174261 entitled "Key Agreement and Transport 
-     Protocol with Implicit Signatures" filed on April 16, 1996;
-13.) E.P. Pat. Appl. Ser. No. 96105920.1 entitled "Key Agreement and 
-     Transport Protocol with Implicit Signatures" filed on April 16, 1996;
-14.) U.S. Pat. No. 6,141,420 entitled "Elliptic Curve Encryption Systems" 
-     issued on October 31, 2000;
-15.) Can. Pat. Appl. Ser. No. 2155038 entitled "Elliptic Curve Encryption 
-     Systems" filed on July 31, 1995;
-16.) E.P. Pat. Appl. Ser. No. 95926348.4 entitled "Elliptic Curve Encryption 
-     Systems" filed on July 31, 1995;
-17.) U.S. Pat. No. 6,336,188 entitled "Authenticated Key Agreement" issued 
-     on January 1, 2002;
-18.) U.S. Pat. No. 6,487,661 entitled "Key Agreement and Transport Protocol" 
-     issued on November 26, 2002;
-19.) Can. Pat. Appl. Ser. No. 2174260 entitled "Key Agreement and Transport 
-     Protocol" filed on April 16, 1996;
-20.) E.P. Pat. Appl. Ser. No. 96105921.9 entitled "Key Agreement and 
-     Transport Protocol" filed on April 21, 1996;
-21.) U.S. Pat. No. 6,563,928 entitled "Strengthened Public Key Protocol" 
-     issued on May 13, 2003;
-22.) U.S. Pat. No. 6,618,483 entitled "Elliptic Curve Encryption Systems" 
-     issued September 9, 2003;
-23.) U.S. Pat. Appl. Ser. No. 09/434,247 entitled "Digital Signatures on a 
-     Smartcard" filed on November 5, 1999;
-24.) U.S. Pat. Appl. Ser. No. 09/558,256 entitled "Key Agreement and 
-     Transport Protocol with Implicit Signatures" filed on April 25, 2000;
-25.) U.S. Pat. Appl. Ser. No. 09/942,492 entitled "Digital Signatures on a 
-     Smartcard" filed on August 29, 2001 and published on July 18, 2002; and,
-26.) U.S. Pat. Appl. Ser. No. 10/185,735 entitled "Strengthened Public Key 
-     Protocol" filed on July 1, 2000.
-

README.FIPS

@@ -1,130 +0,0 @@
-Preliminary status and build information for FIPS module v2.0 
-
-NB: if you are cross compiling you now need to use the latest "incore" script
-this can be found at util/incore in the tarballs.
-
-If you have any object files from a previous build do:
-
-make clean
-
-To build the module do:
-
-./config fipscanisteronly
-make
-
-Build should complete without errors.
-
-Build test utilities:
-
-make build_tests
-
-Run test suite:
-
-test/fips_test_suite
-
-again should complete without errors.
-
-Run test vectors: 
-
-1. Download an appropriate set of testvectors from www.openssl.org/docs/fips
-   only the fips-2.0 testvector files are usable for complete tests.
-
-2. Extract the files to a suitable directory.
-
-3. Run the test vector perl script, for example:
-
-   cd fips
-   perl fipsalgtest.pl --dir=/wherever/stuff/was/extracted
-
-4. It should say "passed all tests" at the end. Report full details of any
-   failures.
-
-If you wish to use the older 1.2.x testvectors (for example those from 2007)
-you need the command line switch --disable-v2 to fipsalgtest.pl
-
-Examine the external symbols in fips/fipscanister.o they should all begin
-with FIPS or fips. One way to check with GNU nm is:
-
-	nm -g --defined-only fips/fipscanister.o | grep -v -i fips
-
-If you get *any* output at all from this test (i.e. symbols not starting with
-fips or FIPS) please report it.
-
-Restricted tarball tests.
-
-The validated module will have its own tarball containing sufficient code to
-build fipscanister.o and the associated algorithm tests. You can create a
-similar tarball yourself for testing purposes using the commands below.
-
-Standard restricted tarball:
-
-make -f Makefile.fips dist
-
-Prime field field only ECC tarball:
-
-make NOEC2M=1 -f Makefile.fips dist
-
-Once you've created the tarball extract into a fresh directory and do:
-
-./config
-make
-
-You can then run the algorithm tests as above. This build automatically uses
-fipscanisterbuild and no-ec2m as appropriate.
-
-FIPS capable OpenSSL test: WARNING PRELIMINARY INSTRUCTIONS, SUBJECT TO CHANGE.
-
-At least initially the test module and FIPS capable OpenSSL may change and
-by out of sync. You are advised to check for any changes and pull the latest
-source from CVS if you have problems. See anon CVS and rsync instructions at:
-
-http://www.openssl.org/source/repos.html
-
-Make or download a restricted tarball from ftp://ftp.openssl.org/snapshot/
-
-If required set the environment variable FIPSDIR to an appropriate location
-to install the test module. If cross compiling set other environment
-variables too.
-
-In this restricted tarball on a Linux or U*ix like system run:
-
-./config
-make
-make install
-
-On Windows from a VC++ environment do:
-
-ms\do_fips
-
-This will build and install the test module and some associated files.
-
-Now download the latest version of the OpenSSL 1.0.1 branch from either a
-snapshot or preferably CVS. For Linux do:
-
-./config fips [other args]
-make
-
-For Windows:
-
-perl Configure VC-WIN32 fips [other args]
-ms\do_nasm
-nmake -f ms\ntdll.mak
-
-(or ms\nt.mak for a static build).
-
-Where [other args] can be any other arguments you use for an OpenSSL build
-such as "shared" or "zlib".
-
-This will build the fips capable OpenSSL and link it to the test module. You
-can now try linking and testing applications against the FIPS capable OpenSSL.
-
-Please report any problems to either the openssl-dev mailing list or directly
-to me steve@openssl.org . Check the mailing lists regularly to avoid duplicate
-reports.
-
-Known issues:
-
-Code needs extensively reviewing to ensure it builds correctly on 
-supported platforms and is compliant with FIPS 140-2.
-The "FIPS capable OpenSSL" is still largely untested, it builds and runs
-some simple tests OK on some systems but needs far more "real world" testing.

STATUS

@@ -1,54 +1,16 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2011/02/08 17:48:56 $
+  ______________                           $Date: 2002/12/07 20:03:42 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 1.1.0:  Under development...
-    o  OpenSSL 1.0.1:  Under development...
-    o  OpenSSL 1.0.0d: Released on February   8nd, 2011
-    o  OpenSSL 1.0.0c: Released on December   2nd, 2010
-    o  OpenSSL 1.0.0b: Released on November  16th, 2010
-    o  OpenSSL 1.0.0a: Released on June      1st,  2010
-    o  OpenSSL 1.0.0:  Released on March     29th, 2010
-    o  OpenSSL 0.9.8r: Released on February   8nd, 2011
-    o  OpenSSL 0.9.8q: Released on December   2nd, 2010
-    o  OpenSSL 0.9.8p: Released on November  16th, 2010
-    o  OpenSSL 0.9.8o: Released on June       1st, 2010
-    o  OpenSSL 0.9.8n: Released on March     24th, 2010
-    o  OpenSSL 0.9.8m: Released on February  25th, 2010
-    o  OpenSSL 0.9.8l: Released on November   5th, 2009
-    o  OpenSSL 0.9.8k: Released on March     25th, 2009
-    o  OpenSSL 0.9.8j: Released on January    7th, 2009
-    o  OpenSSL 0.9.8i: Released on September 15th, 2008
-    o  OpenSSL 0.9.8h: Released on May       28th, 2008
-    o  OpenSSL 0.9.8g: Released on October   19th, 2007
-    o  OpenSSL 0.9.8f: Released on October   11th, 2007
-    o  OpenSSL 0.9.8e: Released on February  23rd, 2007
-    o  OpenSSL 0.9.8d: Released on September 28th, 2006
-    o  OpenSSL 0.9.8c: Released on September  5th, 2006
-    o  OpenSSL 0.9.8b: Released on May        4th, 2006
-    o  OpenSSL 0.9.8a: Released on October   11th, 2005
-    o  OpenSSL 0.9.8:  Released on July       5th, 2005
-    o  OpenSSL 0.9.7m: Released on February  23rd, 2007
-    o  OpenSSL 0.9.7l: Released on September 28th, 2006
-    o  OpenSSL 0.9.7k: Released on September  5th, 2006
-    o  OpenSSL 0.9.7j: Released on May        4th, 2006
-    o  OpenSSL 0.9.7i: Released on October   14th, 2005
-    o  OpenSSL 0.9.7h: Released on October   11th, 2005
-    o  OpenSSL 0.9.7g: Released on April     11th, 2005
-    o  OpenSSL 0.9.7f: Released on March     22nd, 2005
-    o  OpenSSL 0.9.7e: Released on October   25th, 2004
-    o  OpenSSL 0.9.7d: Released on March     17th, 2004
-    o  OpenSSL 0.9.7c: Released on September 30th, 2003
-    o  OpenSSL 0.9.7b: Released on April     10th, 2003
-    o  OpenSSL 0.9.7a: Released on February  19th, 2003
-    o  OpenSSL 0.9.7:  Released on December  31st, 2002
-    o  OpenSSL 0.9.6m: Released on March     17th, 2004
-    o  OpenSSL 0.9.6l: Released on November   4th, 2003
-    o  OpenSSL 0.9.6k: Released on September 30th, 2003
-    o  OpenSSL 0.9.6j: Released on April     10th, 2003
-    o  OpenSSL 0.9.6i: Released on February  19th, 2003
+    o  OpenSSL 0.9.8:  Under development...
+    o  OpenSSL 0.9.7-beta5: Released on December  5th, 2002
+    o  OpenSSL 0.9.7-beta4: Released on November 19th, 2002
+       Debian GNU/Linux (kernel version 2.4.19, gcc 2.95.4)	- PASSED
+    o  OpenSSL 0.9.7-beta3: Released on July     30th, 2002
+    o  OpenSSL 0.9.7-beta2: Released on June     16th, 2002
+    o  OpenSSL 0.9.7-beta1: Released on June      1st, 2002
     o  OpenSSL 0.9.6h: Released on December   5th, 2002
     o  OpenSSL 0.9.6g: Released on August     9th, 2002
     o  OpenSSL 0.9.6f: Released on August     8th, 2002
@@ -66,12 +28,24 @@
     o  OpenSSL 0.9.2b: Released on March     22th, 1999
     o  OpenSSL 0.9.1c: Released on December  23th, 1998
 
-  [See also http://www.openssl.org/support/rt.html]
+  [See also http://www.openssl.org/support/rt2.html]
 
   RELEASE SHOWSTOPPERS
 
-    o The Makefiles fail with some SysV makes.
-    o 
+    o BN_mod_mul verification fails for mips3-sgi-irix
+      unless configured with no-asm
+
+    o [2002-11-21]
+      PR 343 mentions that scrubbing memory with 'memset(ptr, 0, n)' may
+      be optimized away in modern compilers.  This is definitely not good
+      and needs to be fixed immediately.  The formula to use is presented
+      in:
+
+      http://online.securityfocus.com/archive/82/297918/2002-10-27/2002-11-02/0
+
+      The problem report that mentions this is:
+
+      https://www.aet.TU-Cottbus.DE/rt2/Ticket/Display.html?id=343
 
   AVAILABLE PATCHES
 
@@ -87,12 +61,19 @@
 	Private key, certificate and CRL API and implementation.
 	Developing and bugfixing PKCS#7 (S/MIME code).
         Various X509 issues: character sets, certificate request extensions.
+    o Geoff and Richard are currently working on:
+	ENGINE (the new code that gives hardware support among others).
     o Richard is currently working on:
+	UI (User Interface)
+	UTIL (a new set of library functions to support some higher level
+	      functionality that is currently missing).
+	Shared library support for VMS.
+	Kerberos 5 authentication (Heimdal)
 	Constification
+	Compression
 	Attribute Certificate support
 	Certificate Pair support
 	Storage Engines (primarly an LDAP storage engine)
-	Certificate chain validation with full RFC 3280 compatibility
 
   NEEDS PATCH
 

VMS/VMSify-conf.pl

@@ -1,34 +0,0 @@
-#! /usr/bin/perl
-
-use strict;
-use warnings;
-
-my @directory_vars = ( "dir", "certs", "crl_dir", "new_certs_dir" );
-my @file_vars = ( "database", "certificate", "serial", "crlnumber",
-		  "crl", "private_key", "RANDFILE" );
-while(<STDIN>) {
-    chomp;
-    foreach my $d (@directory_vars) {
-	if (/^(\s*\#?\s*${d}\s*=\s*)\.\/([^\s\#]*)([\s\#].*)$/) {
-	    $_ = "$1sys\\\$disk:\[.$2$3";
-	} elsif (/^(\s*\#?\s*${d}\s*=\s*)(\w[^\s\#]*)([\s\#].*)$/) {
-	    $_ = "$1sys\\\$disk:\[.$2$3";
-	}
-	s/^(\s*\#?\s*${d}\s*=\s*\$\w+)\/([^\s\#]*)([\s\#].*)$/$1.$2\]$3/;
-	while(/^(\s*\#?\s*${d}\s*=\s*(\$\w+\.|sys\\\$disk:\[\.)[\w\.]+)\/([^\]]*)\](.*)$/) {
-	    $_ = "$1.$3]$4";
-	}
-    }
-    foreach my $f (@file_vars) {
-	s/^(\s*\#?\s*${f}\s*=\s*)\.\/(.*)$/$1sys\\\$disk:\[\/$2/;
-	while(/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/(\w+\/[^\s\#]*)([\s\#].*)$/) {
-	    $_ = "$1.$3$4";
-	}
-	if (/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/(\w+)([\s\#].*)$/) {
-	    $_ = "$1]$3.$4";
-	} elsif  (/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/([^\s\#]*)([\s\#].*)$/) {
-	    $_ = "$1]$3$4";
-	}
-   }
-    print $_,"\n";
-}

VMS/install-vms.com

@@ -1,67 +0,0 @@
-$! install-vms.com -- Installs the files in a given directory tree
-$!
-$! Author: Richard Levitte <richard@levitte.org>
-$! Time of creation: 23-MAY-1998 19:22
-$!
-$! P1	root of the directory tree
-$!
-$!
-$! Announce/identify.
-$!
-$ proc = f$environment( "procedure")
-$ write sys$output "@@@ "+ -
-   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
-$!
-$ on error then goto tidy
-$ on control_c then goto tidy
-$!
-$ if p1 .eqs. ""
-$ then
-$   write sys$output "First argument missing."
-$   write sys$output -
-     "Should be the directory where you want things installed."
-$   exit
-$ endif
-$
-$ if (f$getsyi( "cpu") .lt. 128)
-$ then
-$   arch = "VAX"
-$ else
-$   arch = f$edit( f$getsyi( "arch_name"), "upcase")
-$   if (arch .eqs. "") then arch = "UNK"
-$ endif
-$
-$ root = f$parse( P1, "[]A.;0", , , "SYNTAX_ONLY, NO_CONCEAL")- "A.;0"
-$ root_dev = f$parse( root, , , "device", "syntax_only")
-$ root_dir = f$parse( root, , , "directory", "syntax_only") - -
-   "[000000." - "][" - "[" - "]"
-$ root = root_dev + "[" + root_dir
-$
-$ define /nolog wrk_sslroot 'root'.] /translation_attributes = concealed
-$ define /nolog wrk_sslinclude wrk_sslroot:[include]
-$
-$ if f$parse( "wrk_sslroot:[000000]") .eqs. "" then -
-   create /directory /log wrk_sslroot:[000000]
-$ if f$parse( "wrk_sslinclude:") .eqs. "" then -
-   create /directory /log wrk_sslinclude:
-$ if f$parse( "wrk_sslroot:[vms]") .eqs. "" then -
-   create /directory /log wrk_sslroot:[vms]
-$!
-$ copy /log /protection = world:re openssl_startup.com wrk_sslroot:[vms]
-$ copy /log /protection = world:re openssl_undo.com wrk_sslroot:[vms]
-$ copy /log /protection = world:re openssl_utils.com wrk_sslroot:[vms]
-$!
-$ tidy:
-$!
-$ call deass wrk_sslroot
-$ call deass wrk_sslinclude
-$!
-$ exit
-$!
-$ deass: subroutine
-$ if (f$trnlnm( p1, "LNM$PROCESS") .nes. "")
-$ then
-$   deassign /process 'p1'
-$ endif
-$ endsubroutine
-$!

VMS/install.com

@@ -0,0 +1,72 @@
+$! INSTALL.COM -- Installs the files in a given directory tree
+$!
+$! Author: Richard Levitte <richard@levitte.org>
+$! Time of creation: 23-MAY-1998 19:22
+$!
+$! P1	root of the directory tree
+$!
+$	IF P1 .EQS. ""
+$	THEN
+$	    WRITE SYS$OUTPUT "First argument missing."
+$	    WRITE SYS$OUTPUT "Should be the directory where you want things installed."
+$	    EXIT
+$	ENDIF
+$
+$	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
+$	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
+$	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
+		   - "[000000." - "][" - "[" - "]"
+$	ROOT = ROOT_DEV + "[" + ROOT_DIR
+$
+$	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
+$	DEFINE/NOLOG WRK_SSLVLIB WRK_SSLROOT:[VAX_LIB]
+$	DEFINE/NOLOG WRK_SSLALIB WRK_SSLROOT:[ALPHA_LIB]
+$	DEFINE/NOLOG WRK_SSLINCLUDE WRK_SSLROOT:[INCLUDE]
+$	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
+$	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
+$	DEFINE/NOLOG WRK_SSLCERTS WRK_SSLROOT:[CERTS]
+$	DEFINE/NOLOG WRK_SSLPRIVATE WRK_SSLROOT:[PRIVATE]
+$
+$	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
+$	IF F$PARSE("WRK_SSLINCLUDE:") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLINCLUDE:
+$	IF F$PARSE("WRK_SSLROOT:[VMS]") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLROOT:[VMS]
+$
+$	IF F$SEARCH("WRK_SSLINCLUDE:vms_idhacks.h") .NES. "" THEN -
+	   DELETE WRK_SSLINCLUDE:vms_idhacks.h;*
+$
+$	OPEN/WRITE SF WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
+$	WRITE SYS$OUTPUT "%OPEN-I-CREATED,  ",F$SEARCH("WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM")," created."
+$	WRITE SF "$! Startup file for Openssl 0.9.2-RL 15-Mar-1999"
+$	WRITE SF "$!"
+$	WRITE SF "$! Do not edit this file, as it will be regenerated during next installation."
+$	WRITE SF "$! Instead, add or change SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
+$	WRITE SF "$!"
+$	WRITE SF "$! P1	a qualifier to DEFINE.  For example ""/SYSTEM"" to get the logical names"
+$	WRITE SF "$!	defined in the system logical name table."
+$	WRITE SF "$!"
+$	WRITE SF "$	ARCH = ""VAX"""
+$	WRITE SF "$	IF F$GETSYI(""CPU"") .GE. 128 THEN ARCH = ""ALPHA"""
+$	WRITE SF "$	DEFINE/NOLOG'P1	SSLROOT		",ROOT,".] /TRANS=CONC"
+$	WRITE SF "$	DEFINE/NOLOG'P1	SSLLIB		SSLROOT:['ARCH'_LIB]"
+$	WRITE SF "$	DEFINE/NOLOG'P1	SSLINCLUDE	SSLROOT:[INCLUDE]"
+$	WRITE SF "$	DEFINE/NOLOG'P1	SSLEXE		SSLROOT:['ARCH'_EXE]"
+$	WRITE SF "$	DEFINE/NOLOG'P1	SSLCERTS	SSLROOT:[CERTS]"
+$	WRITE SF "$	DEFINE/NOLOG'P1	SSLPRIVATE	SSLROOT:[PRIVATE]"
+$	WRITE SF "$"
+$	WRITE SF "$!	This is program can include <openssl/{foo}.h>"
+$	WRITE SF "$	DEFINE/NOLOG'P1	OPENSSL		SSLINCLUDE:"
+$	WRITE SF "$"
+$	WRITE SF "$	IF F$SEARCH(""SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"") .NES."""" THEN -"
+$	WRITE SF "	   @SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
+$	WRITE SF "$"
+$	WRITE SF "$	EXIT"
+$	CLOSE SF
+$	SET FILE/PROT=WORLD:RE WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
+$
+$	COPY OPENSSL_UTILS.COM WRK_SSLROOT:[VMS]/LOG
+$	SET FILE/PROT=WORLD:RE WRK_SSLROOT:[VMS]OPENSSL_UTILS.COM
+$
+$	EXIT

VMS/mkshared.com

@@ -1,164 +1,77 @@
-$! MKSHARED.COM -- Create shareable images.
+$! MKSHARED.COM -- script to created shareable images on VMS
 $!
-$! P1: "64" for 64-bit pointers.
+$! No command line parameters.  This should be run at the start of the source
+$! tree (the same directory where one finds INSTALL.VMS).
 $!
-$! P2: Zlib object library path (optional).
-$!
-$! Input:	[.UTIL]LIBEAY.NUM,[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO[32].OLB
-$!		[.UTIL]SSLEAY.NUM,[.xxx.EXE.SSL]SSL_LIBSSL[32].OLB
-$! Output:	[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO_SHR[32].OPT,.MAP,.EXE
-$!		[.xxx.EXE.SSL]SSL_LIBSSL_SRH[32].OPT,.MAP,.EXE
+$! Input:	[.UTIL]LIBEAY.NUM,[.AXP.EXE.CRYPTO]LIBCRYPTO.OLB
+$!		[.UTIL]SSLEAY.NUM,[.AXP.EXE.SSL]LIBSSL.OLB
+$! Output:	[.AXP.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
+$!		[.AXP.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
 $!
 $! So far, tests have only been made on VMS for Alpha.  VAX will come in time.
 $! ===========================================================================
-$!
-$! Announce/identify.
-$!
-$ proc = f$environment( "procedure")
-$ write sys$output "@@@ "+ -
-   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
-$!
-$! Save the original default device:[directory].
-$!
-$ def_orig = f$environment( "default")
-$ on error then goto tidy
-$ on control_c then goto tidy
-$!
-$! SET DEFAULT to the main kit directory.
-$!
-$ proc = f$environment("procedure")
-$ proc = f$parse( "A.;", proc)- "A.;"
-$ set default 'proc'
-$ set default [-]
-$!
+$
 $! ----- Prepare info for processing: version number and file info
 $ gosub read_version_info
 $ if libver .eqs. ""
 $ then
 $   write sys$error "ERROR: Couldn't find any library version info..."
-$   go to tidy:
+$   exit
 $ endif
 $
-$ if (f$getsyi("cpu") .lt. 128)
+$ if f$getsyi("CPU") .ge. 128
 $ then
-$   arch_vax = 1
-$   arch = "VAX"
+$   libid  = "Crypto"
+$   libnum = "[.UTIL]LIBEAY.NUM"
+$   libdir = "[.AXP.EXE.CRYPTO]"
+$   libolb = "''libdir'LIBCRYPTO.OLB"
+$   libopt = "''libdir'LIBCRYPTO.OPT"
+$   libmap = "''libdir'LIBCRYPTO.MAP"
+$   libgoal= "''libdir'LIBCRYPTO.EXE"
+$   libref = ""
+$   gosub create_axp_shr
+$   libid  = "SSL"
+$   libnum = "[.UTIL]SSLEAY.NUM"
+$   libdir = "[.AXP.EXE.SSL]"
+$   libolb = "''libdir'LIBSSL.OLB"
+$   libopt = "''libdir'LIBSSL.OPT"
+$   libmap = "''libdir'LIBSSL.MAP"
+$   libgoal= "''libdir'LIBSSL.EXE"
+$   libref = "[.AXP.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   gosub create_axp_shr
 $ else
-$   arch_vax = 0
-$   arch = f$edit( f$getsyi( "ARCH_NAME"), "UPCASE")
-$   if (arch .eqs. "") then arch = "UNK"
-$ endif
-$!
-$ archd = arch
-$ lib32 = "32"
-$ shr = "SHR32"
-$!
-$ if (p1 .nes. "")
-$ then
-$   if (p1 .eqs. "64")
-$   then
-$     archd = arch+ "_64"
-$     lib32 = ""
-$     shr = "SHR"
-$   else
-$     if (p1 .nes. "32")
-$     then
-$       write sys$output "Second argument invalid."
-$       write sys$output "It should be "32", "64", or nothing."
-$       exit
-$     endif
-$   endif
-$ endif
-$!
-$ ZLIB = p2
-$ zlib_lib = ""
-$ if (ZLIB .nes. "")
-$ then
-$   file2 = f$parse( ZLIB, "libz.olb", , , "syntax_only")
-$   if (f$search( file2) .eqs. "")
-$   then
-$     write sys$output ""
-$     write sys$output "The Option ", ZLIB, " Is Invalid."
-$     write sys$output "    Can't find library: ''file2'"
-$     write sys$output ""
-$     goto tidy
-$   endif
-$   zlib_lib = ", ''file2' /library"
-$ endif
-$!
-$ if (arch_vax)
-$ then
 $   libtit = "CRYPTO_TRANSFER_VECTOR"
 $   libid  = "Crypto"
 $   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.''ARCHD'.EXE.CRYPTO]"
-$   libmar = "''libdir'SSL_LIBCRYPTO_''shr'.MAR"
-$   libolb = "''libdir'SSL_LIBCRYPTO''lib32'.OLB"
-$   libopt = "''libdir'SSL_LIBCRYPTO_''shr'.OPT"
-$   libobj = "''libdir'SSL_LIBCRYPTO_''shr'.OBJ"
-$   libmap = "''libdir'SSL_LIBCRYPTO_''shr'.MAP"
-$   libgoal= "''libdir'SSL_LIBCRYPTO_''shr'.EXE"
+$   libdir = "[.VAX.EXE.CRYPTO]"
+$   libmar = "''libdir'LIBCRYPTO.MAR"
+$   libolb = "''libdir'LIBCRYPTO.OLB"
+$   libopt = "''libdir'LIBCRYPTO.OPT"
+$   libobj = "''libdir'LIBCRYPTO.OBJ"
+$   libmap = "''libdir'LIBCRYPTO.MAP"
+$   libgoal= "''libdir'LIBCRYPTO.EXE"
 $   libref = ""
 $   libvec = "LIBCRYPTO"
-$   if f$search( libolb) .nes. "" then gosub create_vax_shr
+$   gosub create_vax_shr
 $   libtit = "SSL_TRANSFER_VECTOR"
 $   libid  = "SSL"
 $   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.''ARCHD'.EXE.SSL]"
-$   libmar = "''libdir'SSL_LIBSSL_''shr'.MAR"
-$   libolb = "''libdir'SSL_LIBSSL''lib32'.OLB"
-$   libopt = "''libdir'SSL_LIBSSL_''shr'.OPT"
-$   libobj = "''libdir'SSL_LIBSSL_''shr'.OBJ"
-$   libmap = "''libdir'SSL_LIBSSL_''shr'.MAP"
-$   libgoal= "''libdir'SSL_LIBSSL_''shr'.EXE"
-$   libref = "[.''ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO_''shr'.EXE"
+$   libdir = "[.VAX.EXE.SSL]"
+$   libmar = "''libdir'LIBSSL.MAR"
+$   libolb = "''libdir'LIBSSL.OLB"
+$   libopt = "''libdir'LIBSSL.OPT"
+$   libobj = "''libdir'LIBSSL.OBJ"
+$   libmap = "''libdir'LIBSSL.MAP"
+$   libgoal= "''libdir'LIBSSL.EXE"
+$   libref = "[.VAX.EXE.CRYPTO]LIBCRYPTO.EXE"
 $   libvec = "LIBSSL"
-$   if f$search( libolb) .nes. "" then gosub create_vax_shr
-$ else
-$   libid  = "Crypto"
-$   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.''ARCHD'.EXE.CRYPTO]"
-$   libolb = "''libdir'SSL_LIBCRYPTO''lib32'.OLB"
-$   libopt = "''libdir'SSL_LIBCRYPTO_''shr'.OPT"
-$   libmap = "''libdir'SSL_LIBCRYPTO_''shr'.MAP"
-$   libgoal= "''libdir'SSL_LIBCRYPTO_''shr'.EXE"
-$   libref = ""
-$   if f$search( libolb) .nes. "" then gosub create_nonvax_shr
-$   libid  = "SSL"
-$   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.''ARCHD'.EXE.SSL]"
-$   libolb = "''libdir'SSL_LIBSSL''lib32'.OLB"
-$   libopt = "''libdir'SSL_LIBSSL_''shr'.OPT"
-$   libmap = "''libdir'SSL_LIBSSL_''shr'.MAP"
-$   libgoal= "''libdir'SSL_LIBSSL_''shr'.EXE"
-$   libref = "[.''ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO_''shr'.EXE"
-$   if f$search( libolb) .nes. "" then gosub create_nonvax_shr
+$   gosub create_vax_shr
 $ endif
-$!
-$ tidy:
-$!
-$! Close any open files.
-$!
-$ if (f$trnlnm( "libnum", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
-   close libnum
-$!
-$ if (f$trnlnm( "mar", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
-   close mar
-$!
-$ if (f$trnlnm( "opt", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
-   close opt
-$!
-$ if (f$trnlnm( "vf", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
-   close vf
-$!
-$! Restore the original default device:[directory].
-$!
-$ set default 'def_orig'
 $ exit
 $
-$! ----- Subroutines to build the shareable libraries
-$! For each supported architecture, there's a main shareable library
-$! creator, which is called from the main code above.
+$! ----- Soubroutines to actually build the shareable libraries
+$! The way things work, there's a main shareable library creator for each
+$! supported architecture, which is called from the main code above.
 $! The creator will define a number of variables to tell the next levels of
 $! subroutines what routines to use to write to the option files, call the
 $! main processor, read_func_num, and when that is done, it will write version
@@ -184,29 +97,28 @@ $! read_func_num depends on the following variables from the creator:
 $! libwriter	The name of the writer routine to call for each .num file line
 $! -----
 $
-$! ----- Subroutines for non-VAX
+$! ----- Subroutines for AXP
 $! -----
 $! The creator routine
-$ create_nonvax_shr:
-$   open /write opt 'libopt'
+$ create_axp_shr:
+$   open/write opt 'libopt'
 $   write opt "identification=""",libid," ",libverstr,""""
-$   write opt libolb, " /library"
+$   write opt libolb,"/lib"
 $   if libref .nes. "" then write opt libref,"/SHARE"
 $   write opt "SYMBOL_VECTOR=(-"
 $   libfirstentry := true
 $   libwrch   := opt
-$   libwriter := write_nonvax_transfer_entry
+$   libwriter := write_axp_transfer_entry
 $   textcount = 0
 $   gosub read_func_num
 $   write opt ")"
 $   write opt "GSMATCH=",libvmatch,",",libver
 $   close opt
-$   link /map = 'libmap' /full /share = 'libgoal' 'libopt' /options -
-     'zlib_lib'
+$   link/map='libmap'/full/share='libgoal' 'libopt'/option
 $   return
 $
 $! The record writer routine
-$ write_nonvax_transfer_entry:
+$ write_axp_transfer_entry:
 $   if libentry .eqs. ".dummy" then return
 $   if info_kind .eqs. "VARIABLE"
 $   then
@@ -232,11 +144,11 @@ $   libfirstentry := false
 $   textcount = textcount + textcount_this
 $   return
 $
-$! ----- Subroutines for VAX
+$! ----- Subroutines for AXP
 $! -----
 $! The creator routine
 $ create_vax_shr:
-$   open /write mar 'libmar'
+$   open/write mar 'libmar'
 $   type sys$input:/out=mar:
 ;
 ; Transfer vector for VAX shareable image
@@ -271,10 +183,10 @@ $!   libwriter := write_vax_vtransfer_entry
 $!   gosub read_func_num
 $   write mar "	.END"
 $   close mar
-$   open /write opt 'libopt'
+$   open/write opt 'libopt'
 $   write opt "identification=""",libid," ",libverstr,""""
 $   write opt libobj
-$   write opt libolb, " /library"
+$   write opt libolb,"/lib"
 $   if libref .nes. "" then write opt libref,"/SHARE"
 $   type sys$input:/out=opt:
 !
@@ -293,8 +205,7 @@ $   libwriter := write_vax_psect_attr
 $   gosub read_func_num
 $   close opt
 $   macro/obj='libobj' 'libmar'
-$   link /map = 'libmap' /full /share = 'libgoal' 'libopt' /options -
-     'zlib_lib'
+$   link/map='libmap'/full/share='libgoal' 'libopt'/option
 $   return
 $
 $! The record writer routine for VAX functions
@@ -316,9 +227,9 @@ $   return
 $
 $! ----- Common subroutines
 $! -----
-$! The .num file reader.  This one has great responsibility.
+$! The .num file reader.  This one has great responsability.
 $ read_func_num:
-$   open /read libnum 'libnum'
+$   open libnum 'libnum'
 $   goto read_nums
 $
 $ read_nums:
@@ -326,46 +237,35 @@ $   libentrynum=0
 $   liblastentry:=false
 $   entrycount=0
 $   loop:
-$     read /end=loop_end /err=loop_end libnum line
-$     lin = f$edit( line, "COMPRESS,TRIM")
-$!    Skip a "#" comment line.
-$     if (f$extract( 0, 1, lin) .eqs. "#") then goto loop
-$     entrynum = f$int(f$element( 1, " ", lin))
-$     entryinfo = f$element( 2, " ", lin)
-$     curentry = f$element( 0, " ", lin)
-$     info_exist = f$element( 0, ":", entryinfo)
-$     info_platforms = ","+ f$element(1, ":", entryinfo)+ ","
-$     info_kind = f$element( 2, ":", entryinfo)
-$     info_algorithms = ","+ f$element( 3, ":", entryinfo)+ ","
+$     read/end=loop_end/err=loop_end libnum line
+$     entrynum=f$int(f$element(1," ",f$edit(line,"COMPRESS,TRIM")))
+$     entryinfo=f$element(2," ",f$edit(line,"COMPRESS,TRIM"))
+$     curentry=f$element(0," ",f$edit(line,"COMPRESS,TRIM"))
+$     info_exist=f$element(0,":",entryinfo)
+$     info_platforms=","+f$element(1,":",entryinfo)+","
+$     info_kind=f$element(2,":",entryinfo)
+$     info_algorithms=","+f$element(3,":",entryinfo)+","
 $     if info_exist .eqs. "NOEXIST" then goto loop
 $     truesum = 0
 $     falsesum = 0
 $     negatives = 1
 $     plat_i = 0
 $     loop1:
-$       plat_entry = f$element( plat_i, ",", info_platforms)
+$       plat_entry = f$element(plat_i,",",info_platforms)
 $       plat_i = plat_i + 1
 $       if plat_entry .eqs. "" then goto loop1
 $       if plat_entry .nes. ","
 $       then
 $         if f$extract(0,1,plat_entry) .nes. "!" then negatives = 0
-$         if (arch_vax)
+$         if f$getsyi("CPU") .lt. 128
 $         then
 $           if plat_entry .eqs. "EXPORT_VAR_AS_FUNCTION" then -
 $             truesum = truesum + 1
 $           if plat_entry .eqs. "!EXPORT_VAR_AS_FUNCTION" then -
 $             falsesum = falsesum + 1
 $         endif
-$!
-$         if ((plat_entry .eqs. "VMS") .or. -
-            ((plat_entry .eqs. "ZLIB") .and. (ZLIB .nes. "")) .or. -
-            (arch_vax .and. (plat_entry .eqs. "VMSVAX"))) then -
-            truesum = truesum + 1
-$!
-$         if ((plat_entry .eqs. "!VMS") .or. -
-            (arch_vax .and. (plat_entry .eqs. "!VMSVAX"))) then -
-            falsesum = falsesum + 1
-$!
+$         if plat_entry .eqs. "VMS" then truesum = truesum + 1
+$         if plat_entry .eqs. "!VMS" then falsesum = falsesum + 1
 $	  goto loop1
 $       endif
 $     endloop1:
@@ -428,7 +328,7 @@ $
 $! The version number reader
 $ read_version_info:
 $   libver = ""
-$   open /read vf [.CRYPTO]OPENSSLV.H
+$   open/read vf [.CRYPTO]OPENSSLV.H
 $   loop_rvi:
 $     read/err=endloop_rvi/end=endloop_rvi vf rvi_line
 $     if rvi_line - "SHLIB_VERSION_NUMBER """ .eqs. rvi_line then -

VMS/openssl_startup.com

@@ -1,108 +0,0 @@
-$!
-$! Startup file for OpenSSL 1.x.
-$!
-$! 2011-03-05 SMS.
-$!
-$! This procedure must reside in the OpenSSL installation directory.
-$! It will fail if it is copied to a different location.
-$!
-$! P1  qualifier(s) for DEFINE.  For example, "/SYSTEM" to get the
-$!     logical names defined in the system logical name table.
-$!
-$! P2  "64", to use executables which were built with 64-bit pointers.
-$!
-$! Good (default) and bad status values.
-$!
-$ status =    %x00010001 ! RMS$_NORMAL, normal successful completion.
-$ rms_e_fnf = %x00018292 ! RMS$_FNF, file not found.
-$!
-$! Prepare for problems.
-$!
-$ orig_dev_dir = f$environment( "DEFAULT")
-$ on control_y then goto clean_up
-$ on error then goto clean_up
-$!
-$! Determine hardware architecture.
-$!
-$ if (f$getsyi( "cpu") .lt. 128)
-$ then
-$   arch_name = "VAX"
-$ else
-$   arch_name = f$edit( f$getsyi( "arch_name"), "upcase")
-$   if (arch_name .eqs. "") then arch_name = "UNK"
-$ endif
-$!
-$ if (p2 .eqs. "64")
-$ then
-$   arch_name_exe = arch_name+ "_64"
-$ else
-$   arch_name_exe = arch_name
-$ endif
-$!
-$! Derive the OpenSSL installation device:[directory] from the location
-$! of this command procedure.
-$!
-$ proc = f$environment( "procedure")
-$ proc_dev_dir = f$parse( "A.;", proc, , , "no_conceal") - "A.;"
-$ proc_dev = f$parse( proc_dev_dir, , , "device", "syntax_only")
-$ proc_dir = f$parse( proc_dev_dir, , , "directory", "syntax_only") - -
-   ".][000000"- "[000000."- "]["- "["- "]"
-$ proc_dev_dir = proc_dev+ "["+ proc_dir+ "]"
-$ set default 'proc_dev_dir'
-$ set default [-]
-$ ossl_dev_dir = f$environment( "default")
-$!
-$! Check existence of expected directories (to see if this procedure has
-$! been moved away from its proper place).
-$!
-$ if ((f$search( "certs.dir;1") .eqs. "") .or. -
-   (f$search( "include.dir;1") .eqs. "") .or. -
-   (f$search( "private.dir;1") .eqs. "") .or. -
-   (f$search( "vms.dir;1") .eqs. ""))
-$ then
-$    write sys$output -
-      "   Can't find expected common OpenSSL directories in:"
-$    write sys$output "   ''ossl_dev_dir'"
-$    status = rms_e_fnf
-$    goto clean_up
-$ endif
-$!
-$ if ((f$search( "''arch_name_exe'_exe.dir;1") .eqs. "") .or. -
-   (f$search( "''arch_name'_lib.dir;1") .eqs. ""))
-$ then
-$    write sys$output -
-      "   Can't find expected architecture-specific OpenSSL directories in:"
-$    write sys$output "   ''ossl_dev_dir'"
-$    status = rms_e_fnf
-$    goto clean_up
-$ endif
-$!
-$! All seems well (enough).  Define the OpenSSL logical names.
-$!
-$ ossl_root = ossl_dev_dir- "]"+ ".]"
-$ define /translation_attributes = concealed /nolog'p1 SSLROOT 'ossl_root'
-$ define /nolog 'p1' SSLCERTS     sslroot:[certs]
-$ define /nolog 'p1' SSLINCLUDE   sslroot:[include]
-$ define /nolog 'p1' SSLPRIVATE   sslroot:[private]
-$ define /nolog 'p1' SSLEXE       sslroot:['arch_name_exe'_exe]
-$ define /nolog 'p1' SSLLIB       sslroot:['arch_name'_lib]
-$!
-$! Defining OPENSSL lets a C program use "#include <openssl/{foo}.h>":
-$ define /nolog 'p1' OPENSSL      SSLINCLUDE:
-$!
-$! Run a site-specific procedure, if it exists.
-$!
-$ if f$search( "sslroot:[vms]openssl_systartup.com") .nes."" then -
-   @ sslroot:[vms]openssl_systartup.com
-$!
-$! Restore the original default dev:[dir] (if known).
-$!
-$ clean_up:
-$!
-$ if (f$type( orig_dev_dir) .nes. "")
-$ then
-$    set default 'orig_dev_dir'
-$ endif
-$!
-$ EXIT 'status'
-$!

VMS/openssl_undo.com

@@ -1,20 +0,0 @@
-$!
-$! Deassign OpenSSL logical names.
-$!
-$ call deass "OPENSSL" "''p1'"
-$ call deass "SSLCERTS" "''p1'"
-$ call deass "SSLEXE" "''p1'"
-$ call deass "SSLINCLUDE" "''p1'"
-$ call deass "SSLLIB" "''p1'"
-$ call deass "SSLPRIVATE" "''p1'"
-$ call deass "SSLROOT" "''p1'"
-$!
-$ exit
-$!
-$deass: subroutine
-$ if (f$trnlnm( p1) .nes. "")
-$ then
-$    deassign 'p2' 'p1'
-$ endif
-$ endsubroutine
-$!

VMS/openssl_utils.com

@@ -8,39 +8,31 @@ $!
 $!
 $! Slightly modified by Richard Levitte <richard@levitte.org>
 $!
-$!
-$! Always define OPENSSL.  Others are optional (non-null P1).
-$!
 $ OPENSSL  :== $SSLEXE:OPENSSL
-$
-$ IF (P1 .NES. "")
-$ THEN
-$     VERIFY   :== $SSLEXE:OPENSSL VERIFY
-$     ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
-$! REQ could conflict with REQUEST.
-$     OREQ     :== $SSLEXE:OPENSSL REQ
-$     DGST     :== $SSLEXE:OPENSSL DGST
-$     DH       :== $SSLEXE:OPENSSL DH
-$     ENC      :== $SSLEXE:OPENSSL ENC
-$     GENDH    :== $SSLEXE:OPENSSL GENDH
-$     ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
-$     CA       :== $SSLEXE:OPENSSL CA
-$     CRL      :== $SSLEXE:OPENSSL CRL
-$     RSA      :== $SSLEXE:OPENSSL RSA
-$     DSA      :== $SSLEXE:OPENSSL DSA
-$     DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
-$     X509     :== $SSLEXE:OPENSSL X509
-$     GENRSA   :== $SSLEXE:OPENSSL GENRSA
-$     GENDSA   :== $SSLEXE:OPENSSL GENDSA
-$     S_SERVER :== $SSLEXE:OPENSSL S_SERVER
-$     S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
-$     SPEED    :== $SSLEXE:OPENSSL SPEED
-$     S_TIME   :== $SSLEXE:OPENSSL S_TIME
-$     VERSION  :== $SSLEXE:OPENSSL VERSION
-$     PKCS7    :== $SSLEXE:OPENSSL PKCS7
-$     CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
-$     SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
-$     CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
-$     NSEQ     :== $SSLEXE:OPENSSL NSEQ
-$     PKCS12   :== $SSLEXE:OPENSSL PKCS12
-$ ENDIF
+$ VERIFY   :== $SSLEXE:OPENSSL VERIFY
+$ ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
+$ REQ      :== $SSLEXE:OPENSSL REQ
+$ DGST     :== $SSLEXE:OPENSSL DGST
+$ DH       :== $SSLEXE:OPENSSL DH
+$ ENC      :== $SSLEXE:OPENSSL ENC
+$ GENDH    :== $SSLEXE:OPENSSL GENDH
+$ ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
+$ CA       :== $SSLEXE:OPENSSL CA
+$ CRL      :== $SSLEXE:OPENSSL CRL
+$ RSA      :== $SSLEXE:OPENSSL RSA
+$ DSA      :== $SSLEXE:OPENSSL DSA
+$ DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
+$ X509     :== $SSLEXE:OPENSSL X509
+$ GENRSA   :== $SSLEXE:OPENSSL GENRSA
+$ GENDSA   :== $SSLEXE:OPENSSL GENDSA
+$ S_SERVER :== $SSLEXE:OPENSSL S_SERVER
+$ S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
+$ SPEED    :== $SSLEXE:OPENSSL SPEED
+$ S_TIME   :== $SSLEXE:OPENSSL S_TIME
+$ VERSION  :== $SSLEXE:OPENSSL VERSION
+$ PKCS7    :== $SSLEXE:OPENSSL PKCS7
+$ CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
+$ SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
+$ CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
+$ NSEQ     :== $SSLEXE:OPENSSL NSEQ
+$ PKCS12   :== $SSLEXE:OPENSSL PKCS12

VMS/tcpip_shr_decc.opt

@@ -1 +0,0 @@
-sys$share:tcpip$ipc_shr.exe/share

apps/.cvsignore

@@ -3,6 +3,3 @@ Makefile.save
 der_chop
 der_chop.bak
 CA.pl
-*.flc
-semantic.cache
-*.dll

apps/CA.com

@@ -37,25 +37,14 @@ $ VERIFY = openssl + " verify"
 $ X509   = openssl + " x509"
 $ PKCS12 = openssl + " pkcs12"
 $ echo   = "write sys$Output"
-$ RET = 1
 $!
-$! 2010-12-20 SMS.
-$! Use a concealed logical name to reduce command line lengths, to
-$! avoid DCL errors on VAX:
-$!     %DCL-W-TKNOVF, command element is too long - shorten
-$! (Path segments like "openssl-1_0_1-stable-SNAP-20101217" accumulate
-$! quickly.)
-$!
-$ CATOP = F$PARSE( F$ENVIRONMENT( "DEFAULT"), "[]")- "].;"+ ".demoCA.]"
-$ define /translation_attributes = concealed CATOP 'CATOP'
-$!
-$ on error then goto clean_up
-$ on control_y then goto clean_up
-$!
-$ CAKEY  = "CATOP:[private]cakey.pem"
-$ CACERT = "CATOP:[000000]cacert.pem"
+$ s = F$PARSE(F$ENVIRONMENT("DEFAULT"),"[]") - "].;"
+$ CATOP  := 's'.demoCA
+$ CAKEY  := ]cakey.pem
+$ CACERT := ]cacert.pem
 $
 $ __INPUT := SYS$COMMAND
+$ RET = 1
 $!
 $ i = 1
 $opt_loop:
@@ -66,7 +55,7 @@ $
 $ IF (prog_opt .EQS. "?" .OR. prog_opt .EQS. "-h" .OR. prog_opt .EQS. "-help") 
 $ THEN
 $   echo "usage: CA -newcert|-newreq|-newca|-sign|-verify" 
-$   goto clean_up
+$   exit
 $ ENDIF
 $!
 $ IF (prog_opt .EQS. "-input")
@@ -80,7 +69,7 @@ $!
 $ IF (prog_opt .EQS. "-newcert")
 $ THEN
 $   ! Create a certificate.
-$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   DEFINE/USER SYS$INPUT '__INPUT'
 $   REQ -new -x509 -keyout newreq.pem -out newreq.pem 'DAYS'
 $   RET=$STATUS
 $   echo "Certificate (and private key) is in newreq.pem"
@@ -90,7 +79,7 @@ $!
 $ IF (prog_opt .EQS. "-newreq")
 $ THEN
 $   ! Create a certificate request
-$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   DEFINE/USER SYS$INPUT '__INPUT'
 $   REQ -new -keyout newreq.pem -out newreq.pem 'DAYS'
 $   RET=$STATUS
 $   echo "Request (and private key) is in newreq.pem"
@@ -101,40 +90,41 @@ $ IF (prog_opt .EQS. "-newca")
 $ THEN
 $   ! If explicitly asked for or it doesn't exist then setup the directory
 $   ! structure that Eric likes to manage things.
-$   IF F$SEARCH( "CATOP:[000000]serial.") .EQS. ""
+$   IF F$SEARCH(CATOP+"]serial.") .EQS. ""
 $   THEN
-$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[000000]
-$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[certs]
-$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[crl]
-$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[newcerts]
-$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[private]
+$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP']
+$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.certs]
+$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.crl]
+$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.newcerts]
+$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.private]
 $
-$     OPEN /WRITE ser_file CATOP:[000000]serial. 
+$     OPEN   /WRITE ser_file 'CATOP']serial. 
 $     WRITE ser_file "01"
 $     CLOSE ser_file
-$     APPEND /NEW_VERSION NL: CATOP:[000000]index.txt
+$     APPEND/NEW NL: 'CATOP']index.txt
 $
 $     ! The following is to make sure access() doesn't get confused.  It
 $     ! really needs one file in the directory to give correct answers...
-$     COPY NLA0: CATOP:[certs].;
-$     COPY NLA0: CATOP:[crl].;
-$     COPY NLA0: CATOP:[newcerts].;
-$     COPY NLA0: CATOP:[private].;
+$     COPY NLA0: 'CATOP'.certs].;
+$     COPY NLA0: 'CATOP'.crl].;
+$     COPY NLA0: 'CATOP'.newcerts].;
+$     COPY NLA0: 'CATOP'.private].;
 $   ENDIF
 $!
-$   IF F$SEARCH( CAKEY) .EQS. ""
+$   IF F$SEARCH(CATOP+".private"+CAKEY) .EQS. ""
 $   THEN
 $     READ '__INPUT' FILE -
-       /PROMPT="CA certificate filename (or enter to create): "
-$     IF (FILE .NES. "") .AND. (F$SEARCH(FILE) .NES. "")
+	   /PROMT="CA certificate filename (or enter to create)"
+$     IF F$SEARCH(FILE) .NES. ""
 $     THEN
-$       COPY 'FILE' 'CAKEY'
-$       RET=$STATUS
+$       COPY 'FILE' 'CATOP'.private'CAKEY'
+$	RET=$STATUS
 $     ELSE
 $       echo "Making CA certificate ..."
-$       DEFINE /USER_MODE SYS$INPUT '__INPUT'
-$       REQ -new -x509 -keyout 'CAKEY' -out 'CACERT' 'DAYS'
-$       RET=$STATUS
+$       DEFINE/USER SYS$INPUT '__INPUT'
+$       REQ -new -x509 -keyout 'CATOP'.private'CAKEY' -
+		       -out 'CATOP''CACERT' 'DAYS'
+$	RET=$STATUS
 $     ENDIF
 $   ENDIF
 $   GOTO opt_loop_continue
@@ -145,16 +135,16 @@ $ THEN
 $   i = i + 1
 $   cname = P'i'
 $   IF cname .EQS. "" THEN cname = "My certificate"
-$   PKCS12 -in newcert.pem -inkey newreq.pem -certfile 'CACERT' -
-     -out newcert.p12 -export -name "''cname'"
+$   PKCS12 -in newcert.pem -inkey newreq.pem -certfile 'CATOP''CACERT -
+	   -out newcert.p12 -export -name "''cname'"
 $   RET=$STATUS
-$   goto clean_up
+$   exit RET
 $ ENDIF
 $!
 $ IF (prog_opt .EQS. "-xsign")
 $ THEN
 $!
-$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   DEFINE/USER SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -infiles newreq.pem
 $   RET=$STATUS
 $   GOTO opt_loop_continue
@@ -163,7 +153,7 @@ $!
 $ IF ((prog_opt .EQS. "-sign") .OR. (prog_opt .EQS. "-signreq"))
 $ THEN
 $!   
-$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   DEFINE/USER SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -out newcert.pem -infiles newreq.pem
 $   RET=$STATUS
 $   type newcert.pem
@@ -175,9 +165,9 @@ $ IF (prog_opt .EQS. "-signcert")
 $  THEN
 $!   
 $   echo "Cert passphrase will be requested twice - bug?"
-$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   DEFINE/USER SYS$INPUT '__INPUT'
 $   X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
-$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   DEFINE/USER SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -out newcert.pem -infiles tmp.pem
 y
 y
@@ -192,17 +182,17 @@ $!
 $   i = i + 1
 $   IF (p'i' .EQS. "")
 $   THEN
-$     DEFINE /USER_MODE SYS$INPUT '__INPUT'
-$     VERIFY "-CAfile" 'CACERT' newcert.pem
+$     DEFINE/USER SYS$INPUT '__INPUT'
+$     VERIFY "-CAfile" 'CATOP''CACERT' newcert.pem
 $   ELSE
 $     j = i
 $    verify_opt_loop:
 $     IF j .GT. 8 THEN GOTO verify_opt_loop_end
 $     IF p'j' .NES. ""
 $     THEN 
-$       DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$       DEFINE/USER SYS$INPUT '__INPUT'
 $       __tmp = p'j'
-$       VERIFY "-CAfile" 'CACERT' '__tmp'
+$       VERIFY "-CAfile" 'CATOP''CACERT' '__tmp'
 $       tmp=$STATUS
 $       IF tmp .NE. 0 THEN RET=tmp
 $     ENDIF
@@ -218,8 +208,8 @@ $ IF (prog_opt .NES. "")
 $ THEN
 $!   
 $   echo "Unknown argument ''prog_opt'"
-$   RET = 3
-$   goto clean_up
+$   
+$   EXIT 3
 $ ENDIF
 $
 $opt_loop_continue:
@@ -227,10 +217,4 @@ $ i = i + 1
 $ GOTO opt_loop
 $
 $opt_loop_end:
-$!
-$clean_up:
-$!
-$ if f$trnlnm( "CATOP", "LNM$PROCESS") .nes. "" then -
-   deassign /process CATOP
-$!
 $ EXIT 'RET'

apps/CA.pl.in

@@ -36,26 +36,16 @@
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
 
-my $openssl;
-if(defined $ENV{OPENSSL}) {
-	$openssl = $ENV{OPENSSL};
-} else {
-	$openssl = "openssl";
-	$ENV{OPENSSL} = $openssl;
-}
-
 $SSLEAY_CONFIG=$ENV{"SSLEAY_CONFIG"};
-$DAYS="-days 365";	# 1 year
-$CADAYS="-days 1095";	# 3 years
-$REQ="$openssl req $SSLEAY_CONFIG";
-$CA="$openssl ca $SSLEAY_CONFIG";
-$VERIFY="$openssl verify";
-$X509="$openssl x509";
-$PKCS12="$openssl pkcs12";
+$DAYS="-days 365";
+$REQ="openssl req $SSLEAY_CONFIG";
+$CA="openssl ca $SSLEAY_CONFIG";
+$VERIFY="openssl verify";
+$X509="openssl x509";
+$PKCS12="openssl pkcs12";
 
 $CATOP="./demoCA";
 $CAKEY="cakey.pem";
-$CAREQ="careq.pem";
 $CACERT="cacert.pem";
 
 $DIRMODE = 0777;
@@ -68,19 +58,19 @@ foreach (@ARGV) {
 	    exit 0;
 	} elsif (/^-newcert$/) {
 	    # create a certificate
-	    system ("$REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS");
+	    system ("$REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Certificate is in newcert.pem, private key is in newkey.pem\n"
+	    print "Certificate (and private key) is in newreq.pem\n"
 	} elsif (/^-newreq$/) {
 	    # create a certificate request
-	    system ("$REQ -new -keyout newkey.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -keyout newreq.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Request is in newreq.pem, private key is in newkey.pem\n";
+	    print "Request (and private key) is in newreq.pem\n";
 	} elsif (/^-newreq-nodes$/) {
 	    # create a certificate request
-	    system ("$REQ -new -nodes -keyout newkey.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -nodes -keyout newreq.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Request is in newreq.pem, private key is in newkey.pem\n";
+	    print "Request (and private key) is in newreq.pem\n";
 	} elsif (/^-newca$/) {
 		# if explicitly asked for or it doesn't exist then setup the
 		# directory structure that Eric likes to manage things 
@@ -92,11 +82,11 @@ foreach (@ARGV) {
 		mkdir "${CATOP}/crl", $DIRMODE ;
 		mkdir "${CATOP}/newcerts", $DIRMODE;
 		mkdir "${CATOP}/private", $DIRMODE;
-		open OUT, ">${CATOP}/index.txt";
-		close OUT;
-		open OUT, ">${CATOP}/crlnumber";
+		open OUT, ">${CATOP}/serial";
 		print OUT "01\n";
 		close OUT;
+		open OUT, ">${CATOP}/index.txt";
+		close OUT;
 	    }
 	    if ( ! -f "${CATOP}/private/$CAKEY" ) {
 		print "CA certificate filename (or enter to create)\n";
@@ -111,24 +101,18 @@ foreach (@ARGV) {
 		    $RET=$?;
 		} else {
 		    print "Making CA certificate ...\n";
-		    system ("$REQ -new -keyout " .
-			"${CATOP}/private/$CAKEY -out ${CATOP}/$CAREQ");
-		    system ("$CA -create_serial " .
-			"-out ${CATOP}/$CACERT $CADAYS -batch " . 
-			"-keyfile ${CATOP}/private/$CAKEY -selfsign " .
-			"-extensions v3_ca " .
-			"-infiles ${CATOP}/$CAREQ ");
+		    system ("$REQ -new -x509 -keyout " .
+			"${CATOP}/private/$CAKEY -out ${CATOP}/$CACERT $DAYS");
 		    $RET=$?;
 		}
 	    }
 	} elsif (/^-pkcs12$/) {
 	    my $cname = $ARGV[1];
 	    $cname = "My Certificate" unless defined $cname;
-	    system ("$PKCS12 -in newcert.pem -inkey newkey.pem " .
+	    system ("$PKCS12 -in newcert.pem -inkey newreq.pem " .
 			"-certfile ${CATOP}/$CACERT -out newcert.p12 " .
 			"-export -name \"$cname\"");
 	    $RET=$?;
-	    print "PKCS #12 file is in newcert.p12\n";
 	    exit $RET;
 	} elsif (/^-xsign$/) {
 	    system ("$CA -policy policy_anything -infiles newreq.pem");

apps/CA.sh

@@ -5,10 +5,10 @@
 #      things easier between now and when Eric is convinced to fix it :-)
 #
 # CA -newca ... will setup the right stuff
-# CA -newreq ... will generate a certificate request
-# CA -sign ... will sign the generated request and output
+# CA -newreq ... will generate a certificate request 
+# CA -sign ... will sign the generated request and output 
 #
-# At the end of that grab newreq.pem and newcert.pem (one has the key
+# At the end of that grab newreq.pem and newcert.pem (one has the key 
 # and the other the certificate) and cat them together and that is what
 # you want/need ... I'll make even this a little cleaner later.
 #
@@ -16,8 +16,8 @@
 # 12-Jan-96 tjh    Added more things ... including CA -signcert which
 #                  converts a certificate to a request and then signs it.
 # 10-Jan-96 eay    Fixed a few more bugs and added the SSLEAY_CONFIG
-#                  environment variable so this can be driven from
-#                  a script.
+#		   environment variable so this can be driven from
+#		   a script.
 # 25-Jul-96 eay    Cleaned up filenames some more.
 # 11-Jun-96 eay    Fixed a few filename missmatches.
 # 03-May-96 eay    Modified to use 'ssleay cmd' instead of 'cmd'.
@@ -29,87 +29,48 @@
 
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
-cp_pem() {
-    infile=$1
-    outfile=$2
-    bound=$3
-    flag=0
-    exec <$infile;
-    while read line; do
-	if [ $flag -eq 1 ]; then
-		echo $line|grep "^-----END.*$bound"  2>/dev/null 1>/dev/null
-		if [ $? -eq 0 ] ; then
-			echo $line >>$outfile
-			break
-		else
-			echo $line >>$outfile
-		fi
-	fi
 
-	echo $line|grep "^-----BEGIN.*$bound"  2>/dev/null 1>/dev/null
-	if [ $? -eq 0 ]; then
-		echo $line >$outfile
-		flag=1
-	fi
-    done
-}
+DAYS="-days 365"
+REQ="openssl req $SSLEAY_CONFIG"
+CA="openssl ca $SSLEAY_CONFIG"
+VERIFY="openssl verify"
+X509="openssl x509"
 
-usage() {
- echo "usage: $0 -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify" >&2
-}
-
-if [ -z "$OPENSSL" ]; then OPENSSL=openssl; fi
-
-if [ -z "$DAYS" ] ; then DAYS="-days 365" ; fi	# 1 year
-CADAYS="-days 1095"	# 3 years
-REQ="$OPENSSL req $SSLEAY_CONFIG"
-CA="$OPENSSL ca $SSLEAY_CONFIG"
-VERIFY="$OPENSSL verify"
-X509="$OPENSSL x509"
-PKCS12="openssl pkcs12"
-
-if [ -z "$CATOP" ] ; then CATOP=./demoCA ; fi
+CATOP=./demoCA
 CAKEY=./cakey.pem
-CAREQ=./careq.pem
 CACERT=./cacert.pem
 
-RET=0
-
-while [ "$1" != "" ] ; do
-case $1 in
+for i
+do
+case $i in
 -\?|-h|-help)
-    usage
+    echo "usage: CA -newcert|-newreq|-newca|-sign|-verify" >&2
     exit 0
     ;;
--newcert)
+-newcert) 
     # create a certificate
-    $REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS
+    $REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS
     RET=$?
-    echo "Certificate is in newcert.pem, private key is in newkey.pem"
+    echo "Certificate (and private key) is in newreq.pem"
     ;;
--newreq)
+-newreq) 
     # create a certificate request
-    $REQ -new -keyout newkey.pem -out newreq.pem $DAYS
-    RET=$?
-    echo "Request is in newreq.pem, private key is in newkey.pem"
-    ;;
--newreq-nodes) 
-    # create a certificate request
-    $REQ -new -nodes -keyout newreq.pem -out newreq.pem $DAYS
+    $REQ -new -keyout newreq.pem -out newreq.pem $DAYS
     RET=$?
     echo "Request (and private key) is in newreq.pem"
     ;;
--newca)
+-newca)     
     # if explicitly asked for or it doesn't exist then setup the directory
-    # structure that Eric likes to manage things
+    # structure that Eric likes to manage things 
     NEW="1"
     if [ "$NEW" -o ! -f ${CATOP}/serial ]; then
 	# create the directory hierarchy
-	mkdir -p ${CATOP}
-	mkdir -p ${CATOP}/certs
-	mkdir -p ${CATOP}/crl
-	mkdir -p ${CATOP}/newcerts
-	mkdir -p ${CATOP}/private
+	mkdir ${CATOP} 
+	mkdir ${CATOP}/certs 
+	mkdir ${CATOP}/crl 
+	mkdir ${CATOP}/newcerts
+	mkdir ${CATOP}/private
+	echo "01" > ${CATOP}/serial
 	touch ${CATOP}/index.txt
     fi
     if [ ! -f ${CATOP}/private/$CAKEY ]; then
@@ -118,60 +79,34 @@ case $1 in
 
 	# ask user for existing CA certificate
 	if [ "$FILE" ]; then
-	    cp_pem $FILE ${CATOP}/private/$CAKEY PRIVATE
-	    cp_pem $FILE ${CATOP}/$CACERT CERTIFICATE
+	    cp $FILE ${CATOP}/private/$CAKEY
 	    RET=$?
-	    if [ ! -f "${CATOP}/serial" ]; then
-		$X509 -in ${CATOP}/$CACERT -noout -next_serial \
-		      -out ${CATOP}/serial
-	    fi
 	else
 	    echo "Making CA certificate ..."
-	    $REQ -new -keyout ${CATOP}/private/$CAKEY \
-			   -out ${CATOP}/$CAREQ
-	    $CA -create_serial -out ${CATOP}/$CACERT $CADAYS -batch \
-			   -keyfile ${CATOP}/private/$CAKEY -selfsign \
-			   -extensions v3_ca \
-			   -infiles ${CATOP}/$CAREQ
+	    $REQ -new -x509 -keyout ${CATOP}/private/$CAKEY \
+			   -out ${CATOP}/$CACERT $DAYS
 	    RET=$?
 	fi
     fi
     ;;
 -xsign)
-    $CA -policy policy_anything -infiles newreq.pem
+    $CA -policy policy_anything -infiles newreq.pem 
     RET=$?
     ;;
--pkcs12)
-    if [ -z "$2" ] ; then
-	CNAME="My Certificate"
-    else
-	CNAME="$2"
-    fi
-    $PKCS12 -in newcert.pem -inkey newreq.pem -certfile ${CATOP}/$CACERT \
-	    -out newcert.p12 -export -name "$CNAME"
-    RET=$?
-    exit $RET
-    ;;
--sign|-signreq)
+-sign|-signreq) 
     $CA -policy policy_anything -out newcert.pem -infiles newreq.pem
     RET=$?
     cat newcert.pem
     echo "Signed certificate is in newcert.pem"
     ;;
--signCA)
-    $CA -policy policy_anything -out newcert.pem -extensions v3_ca -infiles newreq.pem
-    RET=$?
-    echo "Signed CA certificate is in newcert.pem"
-    ;;
--signcert)
+-signcert) 
     echo "Cert passphrase will be requested twice - bug?"
     $X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
     $CA -policy policy_anything -out newcert.pem -infiles tmp.pem
-    RET=$?
     cat newcert.pem
     echo "Signed certificate is in newcert.pem"
     ;;
--verify)
+-verify) 
     shift
     if [ -z "$1" ]; then
 	    $VERIFY -CAfile $CATOP/$CACERT newcert.pem
@@ -185,14 +120,13 @@ case $1 in
 	    fi
 	done
     fi
-    exit $RET
+    exit 0
     ;;
 *)
-    echo "Unknown arg $i" >&2
-    usage
+    echo "Unknown arg $i";
     exit 1
     ;;
 esac
-shift
 done
 exit $RET
+

apps/apps.h

@@ -114,17 +114,14 @@
 
 #include "e_os.h"
 
+#include <openssl/buffer.h>
 #include <openssl/bio.h>
+#include <openssl/crypto.h>
 #include <openssl/x509.h>
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
 #include <openssl/txt_db.h>
-#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
-#endif
-#ifndef OPENSSL_NO_OCSP
-#include <openssl/ocsp.h>
-#endif
 #include <openssl/ossl_typ.h>
 
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -137,6 +134,17 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
                                        * (see e_os.h).  The string is
                                        * destroyed! */
 
+#ifdef OPENSSL_SYS_WIN32
+#define rename(from,to) WIN32_rename((from),(to))
+int WIN32_rename(char *oldname,char *newname);
+#endif
+
+/* VMS below version 7.0 doesn't have strcasecmp() */
+#ifdef OPENSSL_SYS_VMS
+#define strcasecmp(str1,str2) VMS_strcasecmp((str1),(str2))
+int VMS_strcasecmp(const char *str1, const char *str2);
+#endif
+
 #ifndef MONOLITH
 
 #define MAIN(a,v)	main(a,v)
@@ -158,9 +166,7 @@ extern BIO *bio_err;
 
 #endif
 
-#ifndef OPENSSL_SYS_NETWARE
 #include <signal.h>
-#endif
 
 #ifdef SIGPIPE
 #define do_pipe_sig()	signal(SIGPIPE,SIG_IGN)
@@ -168,47 +174,37 @@ extern BIO *bio_err;
 #define do_pipe_sig()
 #endif
 
-#ifdef OPENSSL_NO_COMP
-#define zlib_cleanup() 
-#else
-#define zlib_cleanup() COMP_zlib_cleanup()
-#endif
-
 #if defined(MONOLITH) && !defined(OPENSSL_C)
 #  define apps_startup() \
 		do_pipe_sig()
 #  define apps_shutdown()
 #else
-#  ifndef OPENSSL_NO_ENGINE
-#    define apps_startup() \
-			do { do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
-#    define apps_shutdown() \
-			do { CONF_modules_unload(1); destroy_ui_method(); \
-			OBJ_cleanup(); EVP_cleanup(); ENGINE_cleanup(); \
-			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
-			ERR_free_strings(); zlib_cleanup();} while(0)
+#  if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+   defined(OPENSSL_SYS_WIN32)
+#    ifdef _O_BINARY
+#      define apps_startup() \
+		do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#    else
+#      define apps_startup() \
+		do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#    endif
 #  else
 #    define apps_startup() \
-			do { do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			setup_ui_method(); } while(0)
-#    define apps_shutdown() \
-			do { CONF_modules_unload(1); destroy_ui_method(); \
-			OBJ_cleanup(); EVP_cleanup(); \
-			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
-			ERR_free_strings(); zlib_cleanup(); } while(0)
+		do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+		ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
+		setup_ui_method(); } while(0)
 #  endif
+#  define apps_shutdown() \
+		do { CONF_modules_unload(1); destroy_ui_method(); \
+		EVP_cleanup(); ENGINE_cleanup(); \
+		CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+		ERR_free_strings(); } while(0)
 #endif
 
-#ifdef OPENSSL_SYSNAME_WIN32
-#  define openssl_fdset(a,b) FD_SET((unsigned int)a, b)
-#else
-#  define openssl_fdset(a,b) FD_SET(a, b)
-#endif
-
-
 typedef struct args_st
 	{
 	char **data;
@@ -235,7 +231,7 @@ void program_name(char *in,char *out,int size);
 int chopup_args(ARGS *arg,char *buf, int *argc, char **argv[]);
 #ifdef HEADER_X509_H
 int dump_cert_text(BIO *out, X509 *x);
-void print_name(BIO *out, const char *title, X509_NAME *nm, unsigned long lflags);
+void print_name(BIO *out, char *title, X509_NAME *nm, unsigned long lflags);
 #endif
 int set_cert_ex(unsigned long *flags, const char *arg);
 int set_name_ex(unsigned long *flags, const char *arg);
@@ -251,85 +247,18 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip);
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
-STACK_OF(X509_CRL) *load_crls(BIO *err, const char *file, int format,
-	const char *pass, ENGINE *e, const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
-#ifndef OPENSSL_NO_ENGINE
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
-#endif
-
-#ifndef OPENSSL_NO_OCSP
-OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
-			char *host, char *path, char *port, int use_ssl,
-			STACK_OF(CONF_VALUE) *headers,
-			int req_timeout);
-#endif
 
 int load_config(BIO *err, CONF *cnf);
 char *make_config_name(void);
 
 /* Functions defined in ca.c and also used in ocsp.c */
 int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
-			ASN1_GENERALIZEDTIME **pinvtm, const char *str);
+			ASN1_GENERALIZEDTIME **pinvtm, char *str);
+int make_serial_index(TXT_DB *db);
 
-#define DB_type         0
-#define DB_exp_date     1
-#define DB_rev_date     2
-#define DB_serial       3       /* index - unique */
-#define DB_file         4       
-#define DB_name         5       /* index - unique when active and not disabled */
-#define DB_NUMBER       6
-
-#define DB_TYPE_REV	'R'
-#define DB_TYPE_EXP	'E'
-#define DB_TYPE_VAL	'V'
-
-typedef struct db_attr_st
-	{
-	int unique_subject;
-	} DB_ATTR;
-typedef struct ca_db_st
-	{
-	DB_ATTR attributes;
-	TXT_DB *db;
-	} CA_DB;
-
-BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai);
-int save_serial(char *serialfile, char *suffix, BIGNUM *serial, ASN1_INTEGER **retai);
-int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix);
-int rand_serial(BIGNUM *b, ASN1_INTEGER *ai);
-CA_DB *load_index(char *dbfile, DB_ATTR *dbattr);
-int index_index(CA_DB *db);
-int save_index(const char *dbfile, const char *suffix, CA_DB *db);
-int rotate_index(const char *dbfile, const char *new_suffix, const char *old_suffix);
-void free_index(CA_DB *db);
-#define index_name_cmp_noconst(a, b) \
-	index_name_cmp((const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, a), \
-	(const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, b))
-int index_name_cmp(const OPENSSL_CSTRING *a, const OPENSSL_CSTRING *b);
-int parse_yesno(const char *str, int def);
-
-X509_NAME *parse_name(char *str, long chtype, int multirdn);
-int args_verify(char ***pargs, int *pargc,
-			int *badarg, BIO *err, X509_VERIFY_PARAM **pm);
-void policies_print(BIO *out, X509_STORE_CTX *ctx);
-int bio_to_mem(unsigned char **out, int maxlen, BIO *in);
-int pkey_ctrl_string(EVP_PKEY_CTX *ctx, char *value);
-int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
-			const char *algname, ENGINE *e, int do_param);
-int do_X509_sign(BIO *err, X509 *x, EVP_PKEY *pkey, const EVP_MD *md,
-			STACK_OF(OPENSSL_STRING) *sigopts);
-int do_X509_REQ_sign(BIO *err, X509_REQ *x, EVP_PKEY *pkey, const EVP_MD *md,
-			STACK_OF(OPENSSL_STRING) *sigopts);
-int do_X509_CRL_sign(BIO *err, X509_CRL *x, EVP_PKEY *pkey, const EVP_MD *md,
-			STACK_OF(OPENSSL_STRING) *sigopts);
-#ifndef OPENSSL_NO_PSK
-extern char *psk_key;
-#endif
-#ifndef OPENSSL_NO_JPAKE
-void jpake_client_auth(BIO *out, BIO *conn, const char *secret);
-void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
-#endif
+X509_NAME *do_subject(char *str, long chtype);
 
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
@@ -341,10 +270,6 @@ void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
 #define FORMAT_ENGINE   7
 #define FORMAT_IISSGC	8	/* XXX this stupid macro helps us to avoid
 				 * adding yet another param to load_*key() */
-#define FORMAT_PEMRSA	9	/* PEM RSAPubicKey format */
-#define FORMAT_ASN1RSA	10	/* DER RSAPubicKey format */
-#define FORMAT_MSBLOB	11	/* MS Key blob format */
-#define FORMAT_PVK	12	/* MS PVK file format */
 
 #define EXT_COPY_NONE	0
 #define EXT_COPY_ADD	1
@@ -354,19 +279,4 @@ void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
 
 #define APP_PASS_LEN	1024
 
-#define SERIAL_RAND_BITS	64
-
-int app_isdir(const char *);
-int raw_read_stdin(void *,int);
-int raw_write_stdout(const void *,int);
-
-#define TM_START	0
-#define TM_STOP		1
-double app_tminterval (int stop,int usertime);
-#endif
-
-#define OPENSSL_NO_SSL_INTERN
-
-#ifndef OPENSSL_NO_NEXTPROTONEG
-unsigned char *next_protos_parse(unsigned short *outlen, const char *in);
 #endif

apps/asn1pars.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
-/* A nice addition from Dr Stephen Henson <steve@openssl.org> to 
+/* A nice addition from Dr Stephen Henson <shenson@bigfoot.com> to 
  * add the -strparse option which parses nested binary structures
  */
 
@@ -94,9 +94,8 @@ int MAIN(int argc, char **argv)
 	char *infile=NULL,*str=NULL,*prog,*oidfile=NULL, *derfile=NULL;
 	char *genstr=NULL, *genconf=NULL;
 	unsigned char *tmpbuf;
-	const unsigned char *ctmpbuf;
 	BUF_MEM *buf=NULL;
-	STACK_OF(OPENSSL_STRING) *osk=NULL;
+	STACK *osk=NULL;
 	ASN1_TYPE *at=NULL;
 
 	informat=FORMAT_PEM;
@@ -113,7 +112,7 @@ int MAIN(int argc, char **argv)
 	prog=argv[0];
 	argc--;
 	argv++;
-	if ((osk=sk_OPENSSL_STRING_new_null()) == NULL)
+	if ((osk=sk_new_null()) == NULL)
 		{
 		BIO_printf(bio_err,"Memory allocation failure\n");
 		goto end;
@@ -169,7 +168,7 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-strparse") == 0)
 			{
 			if (--argc < 1) goto bad;
-			sk_OPENSSL_STRING_push(osk,*(++argv));
+			sk_push(osk,*(++argv));
 			}
 		else if (strcmp(*argv,"-genstr") == 0)
 			{
@@ -196,7 +195,7 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] <infile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg   input format - one of DER PEM\n");
+		BIO_printf(bio_err," -inform arg   input format - one of DER TXT PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file (output format is always DER\n");
 		BIO_printf(bio_err," -noout arg    don't produce any output\n");
@@ -302,25 +301,23 @@ bad:
 
 	/* If any structs to parse go through in sequence */
 
-	if (sk_OPENSSL_STRING_num(osk))
+	if (sk_num(osk))
 		{
 		tmpbuf=(unsigned char *)str;
 		tmplen=num;
-		for (i=0; i<sk_OPENSSL_STRING_num(osk); i++)
+		for (i=0; i<sk_num(osk); i++)
 			{
 			ASN1_TYPE *atmp;
-			int typ;
-			j=atoi(sk_OPENSSL_STRING_value(osk,i));
+			j=atoi(sk_value(osk,i));
 			if (j == 0)
 				{
-				BIO_printf(bio_err,"'%s' is an invalid number\n",sk_OPENSSL_STRING_value(osk,i));
+				BIO_printf(bio_err,"'%s' is an invalid number\n",sk_value(osk,i));
 				continue;
 				}
 			tmpbuf+=j;
 			tmplen-=j;
 			atmp = at;
-			ctmpbuf = tmpbuf;
-			at = d2i_ASN1_TYPE(NULL,&ctmpbuf,tmplen);
+			at = d2i_ASN1_TYPE(NULL,&tmpbuf,tmplen);
 			ASN1_TYPE_free(atmp);
 			if(!at)
 				{
@@ -328,15 +325,6 @@ bad:
 				ERR_print_errors(bio_err);
 				goto end;
 				}
-			typ = ASN1_TYPE_get(at);
-			if ((typ == V_ASN1_OBJECT)
-				|| (typ == V_ASN1_NULL))
-				{
-				BIO_printf(bio_err, "Can't parse %s type\n",
-					typ == V_ASN1_NULL ? "NULL" : "OBJECT");
-				ERR_print_errors(bio_err);
-				goto end;
-				}
 			/* hmm... this is a little evil but it works */
 			tmpbuf=at->value.asn1_string->data;
 			tmplen=at->value.asn1_string->length;
@@ -345,15 +333,7 @@ bad:
 		num=tmplen;
 		}
 
-	if (offset >= num)
-		{
-		BIO_printf(bio_err, "Error: offset too large\n");
-		goto end;
-		}
-
-	num -= offset;
-
-	if ((length == 0) || ((long)length > num)) length=(unsigned int)num;
+	if (length == 0) length=(unsigned int)num;
 	if(derout) {
 		if(BIO_write(derout, str + offset, length) != (int)length) {
 			BIO_printf(bio_err, "Error writing output\n");
@@ -378,7 +358,7 @@ end:
 		ERR_print_errors(bio_err);
 	if (buf != NULL) BUF_MEM_free(buf);
 	if (at != NULL) ASN1_TYPE_free(at);
-	if (osk != NULL) sk_OPENSSL_STRING_free(osk);
+	if (osk != NULL) sk_free(osk);
 	OBJ_cleanup();
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
@@ -408,7 +388,6 @@ static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf)
 
 	atyp = ASN1_generate_nconf(genstr, cnf);
 	NCONF_free(cnf);
-	cnf = NULL;
 
 	if (!atyp)
 		return -1;

apps/ciphers.c

@@ -69,10 +69,9 @@
 #undef PROG
 #define PROG	ciphers_main
 
-static const char *ciphers_usage[]={
+static char *ciphers_usage[]={
 "usage: ciphers args\n",
-" -v          - verbose mode, a textual listing of the SSL/TLS ciphers in OpenSSL\n",
-" -V          - even more verbose\n",
+" -v          - verbose mode, a textual listing of the ciphers in SSLeay\n",
 " -ssl2       - SSL2 mode\n",
 " -ssl3       - SSL3 mode\n",
 " -tls1       - TLS1 mode\n",
@@ -84,14 +83,14 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
-	int verbose=0,Verbose=0;
-	const char **pp;
+	int verbose=0;
+	char **pp;
 	const char *p;
 	int badops=0;
 	SSL_CTX *ctx=NULL;
 	SSL *ssl=NULL;
 	char *ciphers=NULL;
-	const SSL_METHOD *meth=NULL;
+	SSL_METHOD *meth=NULL;
 	STACK_OF(SSL_CIPHER) *sk;
 	char buf[512];
 	BIO *STDout=NULL;
@@ -115,8 +114,6 @@ int MAIN(int argc, char **argv)
 	STDout = BIO_push(tmpbio, STDout);
 	}
 #endif
-	if (!load_config(bio_err, NULL))
-		goto end;
 
 	argc--;
 	argv++;
@@ -124,8 +121,6 @@ int MAIN(int argc, char **argv)
 		{
 		if (strcmp(*argv,"-v") == 0)
 			verbose=1;
-		else if (strcmp(*argv,"-V") == 0)
-			verbose=Verbose=1;
 #ifndef OPENSSL_NO_SSL2
 		else if (strcmp(*argv,"-ssl2") == 0)
 			meth=SSLv2_client_method();
@@ -184,33 +179,15 @@ int MAIN(int argc, char **argv)
 			}
 		BIO_printf(STDout,"\n");
 		}
-	else /* verbose */
+	else
 		{
 		sk=SSL_get_ciphers(ssl);
 
 		for (i=0; i<sk_SSL_CIPHER_num(sk); i++)
 			{
-			SSL_CIPHER *c;
-
-			c = sk_SSL_CIPHER_value(sk,i);
-			
-			if (Verbose)
-				{
-				unsigned long id = SSL_CIPHER_get_id(c);
-				int id0 = (int)(id >> 24);
-				int id1 = (int)((id >> 16) & 0xffL);
-				int id2 = (int)((id >> 8) & 0xffL);
-				int id3 = (int)(id & 0xffL);
-				
-				if ((id & 0xff000000L) == 0x02000000L)
-					BIO_printf(STDout, "     0x%02X,0x%02X,0x%02X - ", id1, id2, id3); /* SSL2 cipher */
-				else if ((id & 0xff000000L) == 0x03000000L)
-					BIO_printf(STDout, "          0x%02X,0x%02X - ", id2, id3); /* SSL3 cipher */
-				else
-					BIO_printf(STDout, "0x%02X,0x%02X,0x%02X,0x%02X - ", id0, id1, id2, id3); /* whatever */
-				}
-
-			BIO_puts(STDout,SSL_CIPHER_description(c,buf,sizeof buf));
+			BIO_puts(STDout,SSL_CIPHER_description(
+				sk_SSL_CIPHER_value(sk,i),
+				buf,sizeof buf));
 			}
 		}
 

apps/crl.c

@@ -72,7 +72,7 @@
 #undef POSTFIX
 #define	POSTFIX	".rvk"
 
-static const char *crl_usage[]={
+static char *crl_usage[]={
 "usage: crl args\n",
 "\n",
 " -inform arg     - input format - default PEM (DER or PEM)\n",
@@ -81,11 +81,9 @@ static const char *crl_usage[]={
 " -in arg         - input file - default stdin\n",
 " -out arg        - output file - default stdout\n",
 " -hash           - print hash value\n",
-" -fingerprint    - print the crl fingerprint\n",
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
-" -crlnumber      - print CRL number\n",
 " -noout          - no CRL output\n",
 " -CAfile  name   - verify CRL using certificates in file \"name\"\n",
 " -CApath  dir    - verify CRL using certificates in \"dir\"\n",
@@ -108,15 +106,15 @@ int MAIN(int argc, char **argv)
 	int informat,outformat;
 	char *infile=NULL,*outfile=NULL;
 	int hash=0,issuer=0,lastupdate=0,nextupdate=0,noout=0,text=0;
-	int fingerprint = 0, crlnumber = 0;
-	const char **pp;
+	int fingerprint = 0;
+	char **pp;
 	X509_STORE *store = NULL;
 	X509_STORE_CTX ctx;
 	X509_LOOKUP *lookup = NULL;
 	X509_OBJECT xobj;
 	EVP_PKEY *pkey;
 	int do_ver = 0;
-	const EVP_MD *md_alg,*digest=EVP_sha1();
+	const EVP_MD *md_alg,*digest=EVP_md5();
 
 	apps_startup();
 
@@ -207,8 +205,6 @@ int MAIN(int argc, char **argv)
 			noout= ++num;
 		else if (strcmp(*argv,"-fingerprint") == 0)
 			fingerprint= ++num;
-		else if (strcmp(*argv,"-crlnumber") == 0)
-			crlnumber= ++num;
 		else if ((md_alg=EVP_get_digestbyname(*argv + 1)))
 			{
 			/* ok */
@@ -284,21 +280,7 @@ bad:
 				{
 				print_name(bio_out, "issuer=", X509_CRL_get_issuer(x), nmflag);
 				}
-			if (crlnumber == i)
-				{
-				ASN1_INTEGER *crlnum;
-				crlnum = X509_CRL_get_ext_d2i(x, NID_crl_number,
-							      NULL, NULL);
-				BIO_printf(bio_out,"crlNumber=");
-				if (crlnum)
-					{
-					i2a_ASN1_INTEGER(bio_out, crlnum);
-					ASN1_INTEGER_free(crlnum);
-					}
-				else
-					BIO_puts(bio_out, "<NONE>");
-				BIO_printf(bio_out,"\n");
-				}
+
 			if (hash == i)
 				{
 				BIO_printf(bio_out,"%08lx\n",
@@ -372,11 +354,7 @@ bad:
 
 	if (text) X509_CRL_print(out, x);
 
-	if (noout) 
-		{
-		ret = 0;
-		goto end;
-		}
+	if (noout) goto end;
 
 	if 	(outformat == FORMAT_ASN1)
 		i=(int)i2d_X509_CRL_bio(out,x);

apps/crl2p7.c

@@ -63,6 +63,7 @@
 #include <stdio.h>
 #include <string.h>
 #include <sys/types.h>
+#include <sys/stat.h>
 #include "apps.h"
 #include <openssl/err.h>
 #include <openssl/evp.h>
@@ -92,7 +93,7 @@ int MAIN(int argc, char **argv)
 	PKCS7 *p7 = NULL;
 	PKCS7_SIGNED *p7s = NULL;
 	X509_CRL *crl=NULL;
-	STACK_OF(OPENSSL_STRING) *certflst=NULL;
+	STACK *certflst=NULL;
 	STACK_OF(X509_CRL) *crl_stack=NULL;
 	STACK_OF(X509) *cert_stack=NULL;
 	int ret=1,nocrl=0;
@@ -140,8 +141,8 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-certfile") == 0)
 			{
 			if (--argc < 1) goto bad;
-			if(!certflst) certflst = sk_OPENSSL_STRING_new_null();
-			sk_OPENSSL_STRING_push(certflst,*(++argv));
+			if(!certflst) certflst = sk_new_null();
+			sk_push(certflst,*(++argv));
 			}
 		else
 			{
@@ -226,8 +227,8 @@ bad:
 	if ((cert_stack=sk_X509_new_null()) == NULL) goto end;
 	p7s->cert=cert_stack;
 
-	if(certflst) for(i = 0; i < sk_OPENSSL_STRING_num(certflst); i++) {
-		certfile = sk_OPENSSL_STRING_value(certflst, i);
+	if(certflst) for(i = 0; i < sk_num(certflst); i++) {
+		certfile = sk_value(certflst, i);
 		if (add_certs_from_file(cert_stack,certfile) < 0)
 			{
 			BIO_printf(bio_err, "error loading certificates\n");
@@ -236,7 +237,7 @@ bad:
 			}
 	}
 
-	sk_OPENSSL_STRING_free(certflst);
+	sk_free(certflst);
 
 	if (outfile == NULL)
 		{
@@ -294,12 +295,19 @@ end:
  */
 static int add_certs_from_file(STACK_OF(X509) *stack, char *certfile)
 	{
+	struct stat st;
 	BIO *in=NULL;
 	int count=0;
 	int ret= -1;
 	STACK_OF(X509_INFO) *sk=NULL;
 	X509_INFO *xi;
 
+	if ((stat(certfile,&st) != 0))
+		{
+		BIO_printf(bio_err,"unable to load the file, %s\n",certfile);
+		goto end;
+		}
+
 	in=BIO_new(BIO_s_file());
 	if ((in == NULL) || (BIO_read_filename(in,certfile) <= 0))
 		{

apps/demoSRP/srp_verifier.txt

@@ -1,6 +0,0 @@
-# This is a file that will be filled by the openssl srp routine.
-# You can initialize the file with additional groups, these are
-# records starting with a I followed by the g and N values and the id.
-# The exact values ... you have to dig this out from the source of srp.c
-# or srp_vfy.c
-# The last value of an I is used as the default group for new users.  

apps/demoSRP/srp_verifier.txt.attr

@@ -1 +0,0 @@
-unique_subject = yes

apps/der_chop.in

@@ -0,0 +1,305 @@
+#!/usr/local/bin/perl
+#
+# der_chop ... this is one total hack that Eric is really not proud of
+#              so don't look at it and don't ask for support
+#
+# The "documentation" for this (i.e. all the comments) are my fault --tjh
+#
+# This program takes the "raw" output of derparse/asn1parse and 
+# converts it into tokens and then runs regular expression matches
+# to try to figure out what to grab to get the things that are needed
+# and it is possible that this will do the wrong thing as it is a *hack*
+#
+# SSLeay 0.5.2+ should have direct read support for x509 (via -inform NET)
+# [I know ... promises promises :-)]
+#
+# To convert a Netscape Certificate:
+#    der_chop < ServerCert.der > cert.pem
+# To convert a Netscape Key (and encrypt it again to protect it)
+#    rsa -inform NET -in ServerKey.der -des > key.pem
+#
+# 23-Apr-96 eay    Added the extra ASN.1 string types, I still think this
+#		   is an evil hack.  If nothing else the parsing should
+#		   be relative, not absolute.
+# 19-Apr-96 tjh    hacked (with eay) into 0.5.x format
+#
+# Tim Hudson
+# tjh@cryptsoft.com
+#
+
+
+require 'getopts.pl';
+
+$debug=0;
+
+# this was the 0.4.x way of doing things ...
+$cmd="derparse";
+$x509_cmd="x509";
+$crl_cmd="crl";
+$rc4_cmd="rc4";
+$md2_cmd="md2";
+$md4_cmd="md4";
+$rsa_cmd="rsa -des -inform der ";
+
+# this was the 0.5.x way of doing things ...
+$cmd="openssl asn1parse";
+$x509_cmd="openssl x509";
+$crl_cmd="openssl crl";
+$rc4_cmd="openssl rc4";
+$md2_cmd="openssl md2";
+$md4_cmd="openssl md4";
+$rsa_cmd="openssl rsa -des -inform der ";
+
+&Getopts('vd:') || die "usage:$0 [-v] [-d num] file";
+$depth=($opt_d =~ /^\d+$/)?$opt_d:0;
+
+&init_der();
+
+if ($#ARGV != -1)
+	{
+	foreach $file (@ARGV)
+		{
+		print STDERR "doing $file\n";
+		&dofile($file);
+		}
+	}
+else
+	{
+	$file="/tmp/a$$.DER";
+	open(OUT,">$file") || die "unable to open $file:$!\n";
+	for (;;)
+		{
+		$i=sysread(STDIN,$b,1024*10);
+		last if ($i <= 0);
+		$i=syswrite(OUT,$b,$i);
+		}
+	&dofile($file);
+	unlink($file);
+	}
+	
+sub dofile
+	{
+	local($file)=@_;
+	local(@p);
+
+	$b=&load_file($file);
+	@p=&load_file_parse($file);
+
+	foreach $_ (@p)
+		{
+		($off,$d,$hl,$len)=&parse_line($_);
+		$d-=$depth;
+		next if ($d != 0);
+		next if ($len == 0);
+
+		$o=substr($b,$off,$len+$hl);
+		($str,@data)=&der_str($o);
+		print "$str\n" if ($opt_v);
+		if ($str =~ /^$crl/)
+			{
+			open(OUT,"|$crl_cmd -inform d -hash -issuer") ||
+				die "unable to run $crl_cmd:$!\n";
+			print OUT $o;
+			close(OUT);
+			}
+		elsif ($str =~ /^$x509/)
+			{
+			open(OUT,"|$x509_cmd -inform d -hash -subject -issuer")
+				|| die "unable to run $x509_cmd:$!\n";
+			print OUT $o;
+			close(OUT);
+			}
+		elsif ($str =~ /^$rsa/)
+			{
+			($type)=($data[3] =~ /OBJECT_IDENTIFIER :(.*)\s*$/);
+			next unless ($type eq "rsaEncryption");
+			($off,$d,$hl,$len)=&parse_line($data[5]);
+			$os=substr($o,$off+$hl,$len);
+			open(OUT,"|$rsa_cmd")
+				|| die "unable to run $rsa_cmd:$!\n";
+			print OUT $os;
+			close(OUT);
+			}
+		elsif ($str =~ /^0G-1D-1G/)
+			{
+			($off,$d,$hl,$len)=&parse_line($data[1]);
+			$os=substr($o,$off+$hl,$len);
+			print STDERR "<$os>\n" if $opt_v;
+			&do_certificate($o,@data)
+				if (($os eq "certificate") &&
+				    ($str =! /^0G-1D-1G-2G-3F-3E-2D/));
+			&do_private_key($o,@data)
+				if (($os eq "private-key") &&
+				    ($str =! /^0G-1D-1G-2G-3F-3E-2D/));
+			}
+		}
+	}
+
+sub der_str
+	{
+	local($str)=@_;
+	local(*OUT,*IN,@a,$t,$d,$ret);
+	local($file)="/tmp/b$$.DER";
+	local(@ret);
+
+	open(OUT,">$file");
+	print OUT $str;
+	close(OUT);
+	open(IN,"$cmd -inform 'd' -in $file |") ||
+		die "unable to run $cmd:$!\n";
+	$ret="";
+	while (<IN>)
+		{
+		chop;
+		push(@ret,$_);
+
+		print STDERR "$_\n" if ($debug);
+
+		@a=split(/\s*:\s*/);
+		($d)=($a[1] =~ /d=\s*(\d+)/);
+		$a[2] =~ s/\s+$//;
+		$t=$DER_s2i{$a[2]};
+		$ret.="$d$t-";
+		}
+	close(IN);
+	unlink($file);
+	chop $ret;
+	$ret =~ s/(-3H(-4G-5F-5[IJKMQRS])+)+/-NAME/g;
+	$ret =~ s/(-3G-4B-4L)+/-RCERT/g;
+	return($ret,@ret);
+	}
+
+sub init_der
+	{
+	$crl= "0G-1G-2G-3F-3E-2G-NAME-2L-2L-2G-RCERT-1G-2F-2E-1C";
+	$x509="0G-1G-2B-2G-3F-3E-2G-NAME-2G-3L-3L-2G-NAME-2G-3G-4F-4E-3C-1G-2F-2E-1C";
+	$rsa= "0G-1B-1G-2F-2E-1D";
+
+	%DER_i2s=(
+		# SSLeay 0.4.x has this list
+		"A","EOC",
+		"B","INTEGER",
+		"C","BIT STRING",
+		"D","OCTET STRING",
+		"E","NULL",
+		"F","OBJECT",
+		"G","SEQUENCE",
+		"H","SET",
+		"I","PRINTABLESTRING",
+		"J","T61STRING",
+		"K","IA5STRING",
+		"L","UTCTIME",
+		"M","NUMERICSTRING",
+		"N","VIDEOTEXSTRING",
+		"O","GENERALIZEDTIME",
+		"P","GRAPHICSTRING",
+		"Q","ISO64STRING",
+		"R","GENERALSTRING",
+		"S","UNIVERSALSTRING",
+
+		# SSLeay 0.5.x changed some things ... and I'm
+		# leaving in the old stuff but adding in these
+		# to handle the new as well --tjh
+		# - Well I've just taken them out and added the extra new
+		# ones :-) - eay
+		);
+
+	foreach (keys %DER_i2s)
+		{ $DER_s2i{$DER_i2s{$_}}=$_; }
+	}
+
+sub parse_line
+	{
+	local($_)=@_;
+
+	return(/\s*(\d+):d=\s*(\d+)\s+hl=\s*(\d+)\s+l=\s*(\d+|inf)\s/);
+	}
+
+#  0:d=0 hl=4 l=377 cons: univ: SEQUENCE          
+#  4:d=1 hl=2 l= 11 prim: univ: OCTET_STRING      
+# 17:d=1 hl=4 l=360 cons: univ: SEQUENCE          
+# 21:d=2 hl=2 l= 12 cons: univ: SEQUENCE          
+# 23:d=3 hl=2 l=  8 prim: univ: OBJECT_IDENTIFIER :rc4
+# 33:d=3 hl=2 l=  0 prim: univ: NULL              
+# 35:d=2 hl=4 l=342 prim: univ: OCTET_STRING
+sub do_private_key
+	{
+	local($data,@struct)=@_;
+	local($file)="/tmp/b$$.DER";
+	local($off,$d,$hl,$len,$_,$b,@p,$s);
+
+	($type)=($struct[4] =~ /OBJECT_IDENTIFIER :(.*)\s*$/);
+	if ($type eq "rc4")
+		{
+		($off,$d,$hl,$len)=&parse_line($struct[6]);
+		open(OUT,"|$rc4_cmd >$file") ||
+			die "unable to run $rc4_cmd:$!\n";
+		print OUT substr($data,$off+$hl,$len);
+		close(OUT);
+
+		$b=&load_file($file);
+		unlink($file);
+
+		($s,@p)=&der_str($b);
+		die "unknown rsa key type\n$s\n"
+			if ($s ne '0G-1B-1G-2F-2E-1D');
+		local($off,$d,$hl,$len)=&parse_line($p[5]);
+		$b=substr($b,$off+$hl,$len);
+		($s,@p)=&der_str($b);
+		open(OUT,"|$rsa_cmd") || die "unable to run $rsa_cmd:$!\n";
+		print OUT $b;
+		close(OUT);
+		}
+	else
+		{
+		print "'$type' is unknown\n";
+		exit(1);
+		}
+	}
+
+sub do_certificate
+	{
+	local($data,@struct)=@_;
+	local($file)="/tmp/b$$.DER";
+	local($off,$d,$hl,$len,$_,$b,@p,$s);
+
+	($off,$d,$hl,$len)=&parse_line($struct[2]);
+	$b=substr($data,$off,$len+$hl);
+
+	open(OUT,"|$x509_cmd -inform d") || die "unable to run $x509_cmd:$!\n";
+	print OUT $b;
+	close(OUT);
+	}
+
+sub load_file
+	{
+	local($file)=@_;
+	local(*IN,$r,$b,$i);
+
+	$r="";
+	open(IN,"<$file") || die "unable to open $file:$!\n";
+	for (;;)
+		{
+		$i=sysread(IN,$b,10240);
+		last if ($i <= 0);
+		$r.=$b;
+		}
+	close(IN);
+	return($r);
+	}
+
+sub load_file_parse
+	{
+	local($file)=@_;
+	local(*IN,$r,@ret,$_,$i,$n,$b);
+
+	open(IN,"$cmd -inform d -in $file|")
+		|| die "unable to run der_parse\n";
+	while (<IN>)
+		{
+		chop;
+		push(@ret,$_);
+		}
+	return($r,@ret);
+	}
+

apps/dgst.c

@@ -66,7 +66,6 @@
 #include <openssl/objects.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/hmac.h>
 
 #undef BUFSIZE
 #define BUFSIZE	1024*8
@@ -75,41 +74,21 @@
 #define PROG	dgst_main
 
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-	  EVP_PKEY *key, unsigned char *sigin, int siglen,
-	  const char *sig_name, const char *md_name,
-	  const char *file,BIO *bmd);
-
-static void list_md_fn(const EVP_MD *m,
-			const char *from, const char *to, void *arg)
-	{
-	const char *mname;
-	/* Skip aliases */
-	if (!m)
-		return;
-	mname = OBJ_nid2ln(EVP_MD_type(m));
-	/* Skip shortnames */
-	if (strcmp(from, mname))
-		return;
-	/* Skip clones */
-	if (EVP_MD_flags(m) & EVP_MD_FLAG_PKEY_DIGEST)
-		return;
-	if (strchr(mname, ' '))
-		mname= EVP_MD_name(m);
-	BIO_printf(arg, "-%-14s to use the %s message digest algorithm\n",
-			mname, mname);
-	}
+	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
+	  const char *file);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL, *impl = NULL;
+	ENGINE *e = NULL;
 	unsigned char *buf=NULL;
-	int i,err=1;
+	int i,err=0;
 	const EVP_MD *md=NULL,*m;
 	BIO *in=NULL,*inp;
 	BIO *bmd=NULL;
 	BIO *out = NULL;
+	const char *name;
 #define PROG_NAME_SIZE  39
 	char pname[PROG_NAME_SIZE+1];
 	int separator=0;
@@ -121,14 +100,7 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
-	char *passargin = NULL, *passin = NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-	int engine_impl = 0;
-#endif
-	char *hmac_key=NULL;
-	char *mac_name=NULL;
-	STACK_OF(OPENSSL_STRING) *sigopts = NULL, *macopts = NULL;
 
 	apps_startup();
 
@@ -156,8 +128,6 @@ int MAIN(int argc, char **argv)
 		if ((*argv)[0] != '-') break;
 		if (strcmp(*argv,"-c") == 0)
 			separator=1;
-		else if (strcmp(*argv,"-r") == 0)
-			separator=2;
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) break;
@@ -173,12 +143,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			keyfile=*(++argv);
 			}
-		else if (!strcmp(*argv,"-passin"))
-			{
-			if (--argc < 1)
-				break;
-			passargin=*++argv;
-			}
 		else if (strcmp(*argv,"-verify") == 0)
 			{
 			if (--argc < 1) break;
@@ -202,54 +166,17 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			keyform=str2fmt(*(++argv));
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) break;
 			engine= *(++argv);
-        		e = setup_engine(bio_err, engine, 0);
 			}
-		else if (strcmp(*argv,"-engine_impl") == 0)
-			engine_impl = 1;
-#endif
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
 		else if (strcmp(*argv,"-binary") == 0)
 			out_bin = 1;
 		else if (strcmp(*argv,"-d") == 0)
 			debug=1;
-		else if (!strcmp(*argv,"-fips-fingerprint"))
-			hmac_key = "etaonrishdlcupfm";
-		else if (!strcmp(*argv,"-hmac"))
-			{
-			if (--argc < 1)
-				break;
-			hmac_key=*++argv;
-			}
-		else if (!strcmp(*argv,"-mac"))
-			{
-			if (--argc < 1)
-				break;
-			mac_name=*++argv;
-			}
-		else if (strcmp(*argv,"-sigopt") == 0)
-			{
-			if (--argc < 1)
-				break;
-			if (!sigopts)
-				sigopts = sk_OPENSSL_STRING_new_null();
-			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
-				break;
-			}
-		else if (strcmp(*argv,"-macopt") == 0)
-			{
-			if (--argc < 1)
-				break;
-			if (!macopts)
-				macopts = sk_OPENSSL_STRING_new_null();
-			if (!macopts || !sk_OPENSSL_STRING_push(macopts, *(++argv)))
-				break;
-			}
 		else if ((m=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
 			md=m;
 		else
@@ -258,9 +185,12 @@ int MAIN(int argc, char **argv)
 		argv++;
 		}
 
+	if (md == NULL)
+		md=EVP_md5();
 
 	if(do_verify && !sigfile) {
 		BIO_printf(bio_err, "No signature to verify: use the -signature option\n");
+		err = 1; 
 		goto end;
 	}
 
@@ -269,7 +199,6 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"unknown option '%s'\n",*argv);
 		BIO_printf(bio_err,"options are\n");
 		BIO_printf(bio_err,"-c              to output the digest with separating colons\n");
-		BIO_printf(bio_err,"-r              to output the digest in coreutils format\n");
 		BIO_printf(bio_err,"-d              to output debug info\n");
 		BIO_printf(bio_err,"-hex            output as hex dump\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
@@ -277,24 +206,29 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-verify file    verify a signature using public key in file\n");
 		BIO_printf(bio_err,"-prverify file  verify a signature using private key in file\n");
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
-		BIO_printf(bio_err,"-out filename   output to filename rather than stdout\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
-		BIO_printf(bio_err,"-sigopt nm:v    signature parameter\n");
-		BIO_printf(bio_err,"-hmac key       create hashed MAC with key\n");
-		BIO_printf(bio_err,"-mac algorithm  create MAC (not neccessarily HMAC)\n"); 
-		BIO_printf(bio_err,"-macopt nm:v    MAC algorithm parameters or key\n");
-#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err,"-binary         output in binary form\n");
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
-#endif
 
-		EVP_MD_do_all_sorted(list_md_fn, bio_err);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
+			LN_md5,LN_md5);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_md4,LN_md4);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_md2,LN_md2);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_sha1,LN_sha1);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_sha,LN_sha);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_mdc2,LN_mdc2);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_ripemd160,LN_ripemd160);
+		err=1;
 		goto end;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-	if (engine_impl)
-		impl = e;
-#endif
+        e = setup_engine(bio_err, engine, 0);
 
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
@@ -302,13 +236,7 @@ int MAIN(int argc, char **argv)
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		/* needed for windows 3.1 */
-		BIO_set_callback_arg(in,(char *)bio_err);
-		}
-
-	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL))
-		{
-		BIO_printf(bio_err, "Error getting password\n");
-		goto end;
+		BIO_set_callback_arg(in,bio_err);
 		}
 
 	if ((in == NULL) || (bmd == NULL))
@@ -318,10 +246,8 @@ int MAIN(int argc, char **argv)
 		}
 
 	if(out_bin == -1) {
-		if(keyfile)
-			out_bin = 1;
-		else
-			out_bin = 0;
+		if(keyfile) out_bin = 1;
+		else out_bin = 0;
 	}
 
 	if(randfile)
@@ -347,11 +273,6 @@ int MAIN(int argc, char **argv)
 		ERR_print_errors(bio_err);
 		goto end;
 	}
-	if ((!!mac_name + !!keyfile + !!hmac_key) > 1)
-		{
-		BIO_printf(bio_err, "MAC and Signing key cannot both be specified\n");
-		goto end;
-		}
 
 	if(keyfile)
 		{
@@ -359,7 +280,7 @@ int MAIN(int argc, char **argv)
 			sigkey = load_pubkey(bio_err, keyfile, keyform, 0, NULL,
 				e, "key file");
 		else
-			sigkey = load_key(bio_err, keyfile, keyform, 0, passin,
+			sigkey = load_key(bio_err, keyfile, keyform, 0, NULL,
 				e, "key file");
 		if (!sigkey)
 			{
@@ -369,108 +290,6 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
-	if (mac_name)
-		{
-		EVP_PKEY_CTX *mac_ctx = NULL;
-		int r = 0;
-		if (!init_gen_str(bio_err, &mac_ctx, mac_name, impl, 0))
-			goto mac_end;
-		if (macopts)
-			{
-			char *macopt;
-			for (i = 0; i < sk_OPENSSL_STRING_num(macopts); i++)
-				{
-				macopt = sk_OPENSSL_STRING_value(macopts, i);
-				if (pkey_ctrl_string(mac_ctx, macopt) <= 0)
-					{
-					BIO_printf(bio_err,
-						"MAC parameter error \"%s\"\n",
-						macopt);
-					ERR_print_errors(bio_err);
-					goto mac_end;
-					}
-				}
-			}
-		if (EVP_PKEY_keygen(mac_ctx, &sigkey) <= 0)
-			{
-			BIO_puts(bio_err, "Error generating key\n");
-			ERR_print_errors(bio_err);
-			goto mac_end;
-			}
-		r = 1;
-		mac_end:
-		if (mac_ctx)
-			EVP_PKEY_CTX_free(mac_ctx);
-		if (r == 0)
-			goto end;
-		}
-
-	if (hmac_key)
-		{
-		sigkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, impl,
-					(unsigned char *)hmac_key, -1);
-		if (!sigkey)
-			goto end;
-		}
-
-	if (sigkey)
-		{
-		EVP_MD_CTX *mctx = NULL;
-		EVP_PKEY_CTX *pctx = NULL;
-		int r;
-		if (!BIO_get_md_ctx(bmd, &mctx))
-			{
-			BIO_printf(bio_err, "Error getting context\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		if (do_verify)
-			r = EVP_DigestVerifyInit(mctx, &pctx, md, impl, sigkey);
-		else
-			r = EVP_DigestSignInit(mctx, &pctx, md, impl, sigkey);
-		if (!r)
-			{
-			BIO_printf(bio_err, "Error setting context\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		if (sigopts)
-			{
-			char *sigopt;
-			for (i = 0; i < sk_OPENSSL_STRING_num(sigopts); i++)
-				{
-				sigopt = sk_OPENSSL_STRING_value(sigopts, i);
-				if (pkey_ctrl_string(pctx, sigopt) <= 0)
-					{
-					BIO_printf(bio_err,
-						"parameter error \"%s\"\n",
-						sigopt);
-					ERR_print_errors(bio_err);
-					goto end;
-					}
-				}
-			}
-		}
-	/* we use md as a filter, reading from 'in' */
-	else
-		{
-		EVP_MD_CTX *mctx = NULL;
-		if (!BIO_get_md_ctx(bmd, &mctx))
-			{
-			BIO_printf(bio_err, "Error getting context\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		if (md == NULL)
-			md = EVP_md5(); 
-		if (!EVP_DigestInit_ex(mctx, md, impl))
-			{
-			BIO_printf(bio_err, "Error setting digest %s\n", pname);
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		}
-
 	if(sigfile && sigkey) {
 		BIO *sigbio;
 		sigbio = BIO_new_file(sigfile, "rb");
@@ -491,51 +310,46 @@ int MAIN(int argc, char **argv)
 			goto end;
 		}
 	}
-	inp=BIO_push(bmd,in);
+		
 
-	if (md == NULL)
-		{
-		EVP_MD_CTX *tctx;
-		BIO_get_md_ctx(bmd, &tctx);
-		md = EVP_MD_CTX_md(tctx);
-		}
+
+	/* we use md as a filter, reading from 'in' */
+	BIO_set_md(bmd,md);
+	inp=BIO_push(bmd,in);
 
 	if (argc == 0)
 		{
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
 		err=do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf,
-			  siglen,NULL,NULL,"stdin",bmd);
+			  siglen,"","(stdin)");
 		}
 	else
 		{
-		const char *md_name = NULL, *sig_name = NULL;
-		if(!out_bin)
-			{
-			if (sigkey)
-				{
-				const EVP_PKEY_ASN1_METHOD *ameth;
-				ameth = EVP_PKEY_get0_asn1(sigkey);
-				if (ameth)
-					EVP_PKEY_asn1_get0_info(NULL, NULL,
-						NULL, NULL, &sig_name, ameth);
-				}
-			md_name = EVP_MD_name(md);
-			}
-		err = 0;
+		name=OBJ_nid2sn(md->type);
 		for (i=0; i<argc; i++)
 			{
+			char *tmp,*tofree=NULL;
 			int r;
+
 			if (BIO_read_filename(in,argv[i]) <= 0)
 				{
 				perror(argv[i]);
 				err++;
 				continue;
 				}
+			if(!out_bin)
+				{
+				tmp=tofree=OPENSSL_malloc(strlen(name)+strlen(argv[i])+5);
+				sprintf(tmp,"%s(%s)= ",name,argv[i]);
+				}
 			else
+				tmp="";
 			r=do_fp(out,buf,inp,separator,out_bin,sigkey,sigbuf,
-				siglen,sig_name,md_name, argv[i],bmd);
+				siglen,tmp,argv[i]);
 			if(r)
 			    err=r;
+			if(tofree)
+				OPENSSL_free(tofree);
 			(void)BIO_reset(bmd);
 			}
 		}
@@ -546,14 +360,8 @@ end:
 		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
-	if (passin)
-		OPENSSL_free(passin);
 	BIO_free_all(out);
 	EVP_PKEY_free(sigkey);
-	if (sigopts)
-		sk_OPENSSL_STRING_free(sigopts);
-	if (macopts)
-		sk_OPENSSL_STRING_free(macopts);
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
 	apps_shutdown();
@@ -561,11 +369,10 @@ end:
 	}
 
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-	  EVP_PKEY *key, unsigned char *sigin, int siglen,
-	  const char *sig_name, const char *md_name,
-	  const char *file,BIO *bmd)
+	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
+	  const char *file)
 	{
-	size_t len;
+	int len;
 	int i;
 
 	for (;;)
@@ -583,7 +390,7 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 		{
 		EVP_MD_CTX *ctx;
 		BIO_get_md_ctx(bp, &ctx);
-		i = EVP_DigestVerifyFinal(ctx, sigin, (unsigned int)siglen); 
+		i = EVP_VerifyFinal(ctx, sigin, (unsigned int)siglen, key); 
 		if(i > 0)
 			BIO_printf(out, "Verified OK\n");
 		else if(i == 0)
@@ -603,8 +410,7 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 		{
 		EVP_MD_CTX *ctx;
 		BIO_get_md_ctx(bp, &ctx);
-		len = BUFSIZE;
-		if(!EVP_DigestSignFinal(ctx, buf, &len)) 
+		if(!EVP_SignFinal(ctx, buf, (unsigned int *)&len, key)) 
 			{
 			BIO_printf(bio_err, "Error Signing Data\n");
 			ERR_print_errors(bio_err);
@@ -612,31 +418,13 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			}
 		}
 	else
-		{
 		len=BIO_gets(bp,(char *)buf,BUFSIZE);
-		if ((int)len <0)
-			{
-			ERR_print_errors(bio_err);
-			return 1;
-			}
-		}
 
 	if(binout) BIO_write(out, buf, len);
-	else if (sep == 2)
-		{
-		for (i=0; i<(int)len; i++)
-			BIO_printf(out, "%02x",buf[i]);
-		BIO_printf(out, " *%s\n", file);
-		}
 	else 
 		{
-		if (sig_name)
-			BIO_printf(out, "%s-%s(%s)= ", sig_name, md_name, file);
-		else if (md_name)
-			BIO_printf(out, "%s(%s)= ", md_name, file);
-		else
-			BIO_printf(out, "(%s)= ", file);
-		for (i=0; i<(int)len; i++)
+		BIO_write(out,title,strlen(title));
+		for (i=0; i<len; i++)
 			{
 			if (sep && (i != 0))
 				BIO_printf(out, ":");

apps/dh.c

@@ -57,7 +57,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <stdlib.h>
@@ -88,14 +87,12 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine;
-#endif
+	char *infile,*outfile,*prog,*engine;
 
 	apps_startup();
 
@@ -106,9 +103,7 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;
 
-#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
-#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -139,13 +134,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -177,17 +170,13 @@ bad:
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
+        e = setup_engine(bio_err, engine, 0);
 
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -346,10 +335,4 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
-#else /* !OPENSSL_NO_DH */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/dhparam.c

@@ -109,7 +109,6 @@
  *
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <stdlib.h>
@@ -143,12 +142,13 @@
  * -C
  */
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dh_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef OPENSSL_NO_DSA
@@ -157,10 +157,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
-	char *inrand=NULL;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine=NULL;
-#endif
+	char *inrand=NULL,*engine=NULL;
 	int num = 0, g = 0;
 
 	apps_startup();
@@ -202,13 +199,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -254,9 +249,7 @@ bad:
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
 		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"               the random number generator\n");
@@ -266,9 +259,7 @@ bad:
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
+        e = setup_engine(bio_err, engine, 0);
 
 	if (g && !num)
 		num = DEFBITS;
@@ -292,8 +283,6 @@ bad:
 
 	if(num) {
 
-		BN_GENCB cb;
-		BN_GENCB_set(&cb, dh_cb, bio_err);
 		if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
 			{
 			BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
@@ -305,13 +294,12 @@ bad:
 #ifndef OPENSSL_NO_DSA
 		if (dsaparam)
 			{
-			DSA *dsa = DSA_new();
+			DSA *dsa;
 			
 			BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
-			if(!dsa || !DSA_generate_parameters_ex(dsa, num,
-						NULL, 0, NULL, NULL, &cb))
+			dsa = DSA_generate_parameters(num, NULL, 0, NULL, NULL, dh_cb, bio_err);
+			if (dsa == NULL)
 				{
-				if(dsa) DSA_free(dsa);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -327,12 +315,12 @@ bad:
 		else
 #endif
 			{
-			dh = DH_new();
 			BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 			BIO_printf(bio_err,"This is going to take a long time\n");
-			if(!dh || !DH_generate_parameters_ex(dh, num, g, &cb))
+			dh=DH_generate_parameters(num,g,dh_cb,bio_err);
+			
+			if (dh == NULL)
 				{
-				if(dh) DH_free(dh);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -535,7 +523,7 @@ end:
 	}
 
 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -543,18 +531,11 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
 
-#else /* !OPENSSL_NO_DH */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/dsa.c

@@ -56,7 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
 #ifndef OPENSSL_NO_DSA
 #include <stdio.h>
 #include <stdlib.h>
@@ -69,7 +68,6 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/bn.h>
 
 #undef PROG
 #define PROG	dsa_main
@@ -84,10 +82,6 @@
  * -aes128	- encrypt output if PEM format
  * -aes192	- encrypt output if PEM format
  * -aes256	- encrypt output if PEM format
- * -camellia128 - encrypt output if PEM format
- * -camellia192 - encrypt output if PEM format
- * -camellia256 - encrypt output if PEM format
- * -seed        - encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the DSA public key
  */
@@ -104,16 +98,11 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
 	int pubin = 0, pubout = 0;
-	char *infile,*outfile,*prog;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine;
-#endif
+	char *infile,*outfile,*prog,*engine;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
 
-	int pvk_encr = 2;
-
 	apps_startup();
 
 	if (bio_err == NULL)
@@ -123,9 +112,7 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;
 
-#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
-#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -166,19 +153,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
-		else if (strcmp(*argv,"-pvk-strong") == 0)
-			pvk_encr=2;
-		else if (strcmp(*argv,"-pvk-weak") == 0)
-			pvk_encr=1;
-		else if (strcmp(*argv,"-pvk-none") == 0)
-			pvk_encr=0;
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -210,9 +189,7 @@ bad:
 		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err," -out arg        output file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
@@ -221,13 +198,6 @@ bad:
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
-#endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed           encrypt PEM output with cbc seed\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");
@@ -237,9 +207,7 @@ bad:
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -266,22 +234,16 @@ bad:
 		}
 
 	BIO_printf(bio_err,"read DSA key\n");
-
+	if	(informat == FORMAT_ASN1) {
+		if(pubin) dsa=d2i_DSA_PUBKEY_bio(in,NULL);
+		else dsa=d2i_DSAPrivateKey_bio(in,NULL);
+	} else if (informat == FORMAT_PEM) {
+		if(pubin) dsa=PEM_read_bio_DSA_PUBKEY(in,NULL, NULL, NULL);
+		else dsa=PEM_read_bio_DSAPrivateKey(in,NULL,NULL,passin);
+	} else
 		{
-		EVP_PKEY	*pkey;
-
-		if (pubin)
-			pkey = load_pubkey(bio_err, infile, informat, 1,
-				passin, e, "Public Key");
-		else
-			pkey = load_key(bio_err, infile, informat, 1,
-				passin, e, "Private Key");
-
-		if (pkey)
-			{
-			dsa = EVP_PKEY_get1_DSA(pkey);
-			EVP_PKEY_free(pkey);
-			}
+		BIO_printf(bio_err,"bad input format specified for key\n");
+		goto end;
 		}
 	if (dsa == NULL)
 		{
@@ -334,24 +296,11 @@ bad:
 			i=PEM_write_bio_DSA_PUBKEY(out,dsa);
 		else i=PEM_write_bio_DSAPrivateKey(out,dsa,enc,
 							NULL,0,NULL, passout);
-#if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_NO_RC4)
-	} else if (outformat == FORMAT_MSBLOB || outformat == FORMAT_PVK) {
-		EVP_PKEY *pk;
-		pk = EVP_PKEY_new();
-		EVP_PKEY_set1_DSA(pk, dsa);
-		if (outformat == FORMAT_PVK)
-			i = i2b_PVK_bio(out, pk, pvk_encr, 0, passout);
-		else if (pubin || pubout)
-			i = i2b_PublicKey_bio(out, pk);
-		else
-			i = i2b_PrivateKey_bio(out, pk);
-		EVP_PKEY_free(pk);
-#endif
 	} else {
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
 		goto end;
 		}
-	if (i <= 0)
+	if (!i)
 		{
 		BIO_printf(bio_err,"unable to write private key\n");
 		ERR_print_errors(bio_err);
@@ -367,10 +316,4 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
-#else /* !OPENSSL_NO_DSA */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/dsaparam.c

@@ -56,13 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #ifndef OPENSSL_NO_DSA
 #include <assert.h>
 #include <stdio.h>
@@ -89,28 +82,15 @@
  * -C
  * -noout
  * -genkey
- *  #ifdef GENCB_TEST
- * -timebomb n  - interrupt keygen after <n> seconds
- *  #endif
  */
 
-#ifdef GENCB_TEST
-
-static int stop_keygen_flag = 0;
-
-static void timebomb_sigalarm(int foo)
-	{
-	stop_keygen_flag = 1;
-	}
-
-#endif
-
-static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dsa_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -118,13 +98,7 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog,*inrand=NULL;
 	int numbits= -1,num,genkey=0;
 	int need_rand=0;
-	int non_fips_allow = 0;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
-#ifdef GENCB_TEST
-	int timebomb=0;
-#endif
 
 	apps_startup();
 
@@ -165,20 +139,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if(strcmp(*argv, "-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine = *(++argv);
 			}
-#endif
-#ifdef GENCB_TEST
-		else if(strcmp(*argv, "-timebomb") == 0)
-			{
-			if (--argc < 1) goto bad;
-			timebomb = atoi(*(++argv));
-			}
-#endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
 		else if (strcmp(*argv,"-C") == 0)
@@ -196,8 +161,6 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
-		else if (strcmp(*argv,"-non-fips-allow") == 0)
-			non_fips_allow = 1;
 		else if (sscanf(*argv,"%d",&num) == 1)
 			{
 			/* generate a key */
@@ -228,12 +191,7 @@ bad:
 		BIO_printf(bio_err," -noout        no output\n");
 		BIO_printf(bio_err," -genkey       generate a DSA key\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
-#ifdef GENCB_TEST
-		BIO_printf(bio_err," -timebomb n   interrupt keygen after <n> seconds\n");
-#endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
 		}
@@ -277,9 +235,7 @@ bad:
 			}
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
+        e = setup_engine(bio_err, engine, 0);
 
 	if (need_rand)
 		{
@@ -291,50 +247,10 @@ bad:
 
 	if (numbits > 0)
 		{
-		BN_GENCB cb;
-		BN_GENCB_set(&cb, dsa_cb, bio_err);
 		assert(need_rand);
-		dsa = DSA_new();
-		if(!dsa)
-			{
-			BIO_printf(bio_err,"Error allocating DSA object\n");
-			goto end;
-			}
-		if (non_fips_allow)
-			dsa->flags |= DSA_FLAG_NON_FIPS_ALLOW;
 		BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
 	        BIO_printf(bio_err,"This could take some time\n");
-#ifdef GENCB_TEST
-		if(timebomb > 0)
-	{
-		struct sigaction act;
-		act.sa_handler = timebomb_sigalarm;
-		act.sa_flags = 0;
-		BIO_printf(bio_err,"(though I'll stop it if not done within %d secs)\n",
-				timebomb);
-		if(sigaction(SIGALRM, &act, NULL) != 0)
-			{
-			BIO_printf(bio_err,"Error, couldn't set SIGALRM handler\n");
-			goto end;
-			}
-		alarm(timebomb);
-	}
-#endif
-	        if(!DSA_generate_parameters_ex(dsa,num,NULL,0,NULL,NULL, &cb))
-			{
-#ifdef GENCB_TEST
-			if(stop_keygen_flag)
-				{
-				BIO_printf(bio_err,"DSA key generation time-stopped\n");
-				/* This is an asked-for behaviour! */
-				ret = 0;
-				goto end;
-				}
-#endif
-			ERR_print_errors(bio_err);
-			BIO_printf(bio_err,"Error, DSA key generation failed\n");
-			goto end;
-			}
+	        dsa=DSA_generate_parameters(num,NULL,0,NULL,NULL, dsa_cb,bio_err);
 		}
 	else if	(informat == FORMAT_ASN1)
 		dsa=d2i_DSAparams_bio(in,NULL);
@@ -360,10 +276,12 @@ bad:
 	if (C)
 		{
 		unsigned char *data;
-		int l,len,bits_p;
+		int l,len,bits_p,bits_q,bits_g;
 
 		len=BN_num_bytes(dsa->p);
 		bits_p=BN_num_bits(dsa->p);
+		bits_q=BN_num_bits(dsa->q);
+		bits_g=BN_num_bits(dsa->g);
 		data=(unsigned char *)OPENSSL_malloc(len+20);
 		if (data == NULL)
 			{
@@ -435,21 +353,13 @@ bad:
 
 		assert(need_rand);
 		if ((dsakey=DSAparams_dup(dsa)) == NULL) goto end;
-		if (non_fips_allow)
-			dsakey->flags |= DSA_FLAG_NON_FIPS_ALLOW;
-		if (!DSA_generate_key(dsakey))
-			{
-			ERR_print_errors(bio_err);
-			DSA_free(dsakey);
-			goto end;
-			}
+		if (!DSA_generate_key(dsakey)) goto end;
 		if 	(outformat == FORMAT_ASN1)
 			i=i2d_DSAPrivateKey_bio(out,dsakey);
 		else if (outformat == FORMAT_PEM)
 			i=PEM_write_bio_DSAPrivateKey(out,dsakey,NULL,NULL,0,NULL,NULL);
 		else	{
 			BIO_printf(bio_err,"bad output format specified for outfile\n");
-			DSA_free(dsakey);
 			goto end;
 			}
 		DSA_free(dsakey);
@@ -465,7 +375,7 @@ end:
 	OPENSSL_EXIT(ret);
 	}
 
-static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -473,21 +383,10 @@ static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write(arg,&c,1);
+	(void)BIO_flush(arg);
 #ifdef LINT
 	p=n;
 #endif
-#ifdef GENCB_TEST
-	if(stop_keygen_flag)
-		return 0;
-#endif
-	return 1;
 	}
-#else /* !OPENSSL_NO_DSA */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/ec.c

@@ -3,7 +3,7 @@
  * Written by Nils Larsch for the OpenSSL project.
  */
 /* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -56,7 +56,6 @@
  *
  */
 
-#include <openssl/opensslconf.h>
 #ifndef OPENSSL_NO_EC
 #include <stdio.h>
 #include <stdlib.h>
@@ -85,9 +84,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 {
+	ENGINE 	*e = NULL;
 	int 	ret = 1;
 	EC_KEY 	*eckey = NULL;
-	const EC_GROUP *group;
 	int 	i, badops = 0;
 	const EVP_CIPHER *enc = NULL;
 	BIO 	*in = NULL, *out = NULL;
@@ -241,7 +240,7 @@ bad:
 				" the ec parameters are encoded\n");
 		BIO_printf(bio_err, "                 in the asn1 der "
 				"encoding\n");
-		BIO_printf(bio_err, "                 possible values:"
+		BIO_printf(bio_err, "                 possilbe values:"
 				" named_curve (default)\n");
 		BIO_printf(bio_err,"                                  "
 				"explicit\n");
@@ -250,9 +249,7 @@ bad:
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
+        e = setup_engine(bio_err, engine, 0);
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) 
 		{
@@ -327,13 +324,14 @@ bad:
 			}
 		}
 
-	group = EC_KEY_get0_group(eckey);
-
 	if (new_form)
-		EC_KEY_set_conv_form(eckey, form);
+		{
+		EC_GROUP_set_point_conversion_form(eckey->group, form);
+		eckey->conv_form = form;
+		}
 
 	if (new_asn1_flag)
-		EC_KEY_set_asn1_flag(eckey, asn1_flag);
+		EC_GROUP_set_asn1_flag(eckey->group, asn1_flag);
 
 	if (text) 
 		if (!EC_KEY_print(out, eckey, 0))
@@ -344,16 +342,13 @@ bad:
 			}
 
 	if (noout) 
-		{
-		ret = 0;
 		goto end;
-		}
 
 	BIO_printf(bio_err, "writing EC key\n");
 	if (outformat == FORMAT_ASN1) 
 		{
 		if (param_out)
-			i = i2d_ECPKParameters_bio(out, group);
+			i = i2d_ECPKParameters_bio(out, eckey->group);
 		else if (pubin || pubout) 
 			i = i2d_EC_PUBKEY_bio(out, eckey);
 		else 
@@ -362,7 +357,7 @@ bad:
 	else if (outformat == FORMAT_PEM) 
 		{
 		if (param_out)
-			i = PEM_write_bio_ECPKParameters(out, group);
+			i = PEM_write_bio_ECPKParameters(out, eckey->group);
 		else if (pubin || pubout)
 			i = PEM_write_bio_EC_PUBKEY(out, eckey);
 		else 
@@ -397,10 +392,4 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 }
-#else /* !OPENSSL_NO_EC */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/ecparam.c

@@ -3,7 +3,7 @@
  * Written by Nils Larsch for the OpenSSL project.
  */
 /* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -68,8 +68,6 @@
  * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
  *
  */
-
-#include <openssl/opensslconf.h>
 #ifndef OPENSSL_NO_EC
 #include <assert.h>
 #include <stdio.h>
@@ -129,6 +127,7 @@ int MAIN(int argc, char **argv)
 	char	*infile = NULL, *outfile = NULL, *prog;
 	BIO 	*in = NULL, *out = NULL;
 	int 	informat, outformat, noout = 0, C = 0, ret = 1;
+	ENGINE	*e = NULL;
 	char	*engine = NULL;
 
 	BIGNUM	*ec_p = NULL, *ec_a = NULL, *ec_b = NULL,
@@ -336,19 +335,18 @@ bad:
 			}
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-	setup_engine(bio_err, engine, 0);
-#endif
+	e = setup_engine(bio_err, engine, 0);
 
 	if (list_curves)
 		{
 		EC_builtin_curve *curves = NULL;
 		size_t crv_len = 0;
 		size_t n = 0;
+		size_t len;
 
 		crv_len = EC_get_builtin_curves(NULL, 0);
 
-		curves = OPENSSL_malloc((int)(sizeof(EC_builtin_curve) * crv_len));
+		curves = OPENSSL_malloc(sizeof(EC_builtin_curve) * crv_len);
 
 		if (curves == NULL)
 			goto end;
@@ -371,8 +369,11 @@ bad:
 			if (sname == NULL)
 				sname = "";
 
-			BIO_printf(out, "  %-10s: ", sname);
-			BIO_printf(out, "%s\n", comment);
+			len = BIO_printf(out, "  %-10s: ", sname);
+			if (len + strlen(comment) > 80)
+				BIO_printf(out, "\n%80s\n", comment);
+			else
+				BIO_printf(out, "%s\n", comment);
 			} 
 
 		OPENSSL_free(curves);
@@ -382,26 +383,7 @@ bad:
 
 	if (curve_name != NULL)
 		{
-		int nid;
-
-		/* workaround for the SECG curve names secp192r1
-		 * and secp256r1 (which are the same as the curves
-		 * prime192v1 and prime256v1 defined in X9.62)
-		 */
-		if (!strcmp(curve_name, "secp192r1"))
-			{
-			BIO_printf(bio_err, "using curve name prime192v1 "
-				"instead of secp192r1\n");
-			nid = NID_X9_62_prime192v1;
-			}
-		else if (!strcmp(curve_name, "secp256r1"))
-			{
-			BIO_printf(bio_err, "using curve name prime256v1 "
-				"instead of secp256r1\n");
-			nid = NID_X9_62_prime256v1;
-			}
-		else
-			nid = OBJ_sn2nid(curve_name);
+		int nid = OBJ_sn2nid(curve_name);
 	
 		if (nid == 0)
 			{
@@ -410,7 +392,7 @@ bad:
 			goto end;
 			}
 
-		group = EC_GROUP_new_by_curve_name(nid);
+		group = EC_GROUP_new_by_nid(nid);
 		if (group == NULL)
 			{
 			BIO_printf(bio_err, "unable to create curve (%s)\n", 
@@ -646,11 +628,11 @@ bad:
 
 		assert(need_rand);
 
-		if (EC_KEY_set_group(eckey, group) == 0)
-			goto end;
+		eckey->group = group;
 		
 		if (!EC_KEY_generate_key(eckey))
 			{
+			eckey->group = NULL;
 			EC_KEY_free(eckey);
 			goto end;
 			}
@@ -663,9 +645,11 @@ bad:
 			{
 			BIO_printf(bio_err, "bad output format specified "
 				"for outfile\n");
+			eckey->group = NULL;
 			EC_KEY_free(eckey);
 			goto end;
 			}
+		eckey->group = NULL;
 		EC_KEY_free(eckey);
 		}
 
@@ -698,7 +682,7 @@ end:
 	OPENSSL_EXIT(ret);
 }
 
-static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
+int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
 	int len, unsigned char *buffer)
 	{
 	BIO_printf(out, "static unsigned char %s_%d[] = {", var, len);
@@ -722,10 +706,4 @@ static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
 	BIO_printf(out, "\n\t};\n\n");
 	return 1;
 	}
-#else /* !OPENSSL_NO_EC */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/enc.c

@@ -67,7 +67,6 @@
 #include <openssl/x509.h>
 #include <openssl/rand.h>
 #include <openssl/pem.h>
-#include <openssl/comp.h>
 #include <ctype.h>
 
 int set_hex(char *in,unsigned char *out,int size);
@@ -101,6 +100,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	static const char magic[]="Salted__";
 	char mbuf[sizeof magic-1];
 	char *strbuf=NULL;
@@ -112,23 +112,14 @@ int MAIN(int argc, char **argv)
 	unsigned char salt[PKCS5_SALT_LEN];
 	char *str=NULL, *passarg = NULL, *pass = NULL;
 	char *hkey=NULL,*hiv=NULL,*hsalt = NULL;
-	char *md=NULL;
 	int enc=1,printkey=0,i,base64=0;
-#ifdef ZLIB
-	int do_zlib=0;
-	BIO *bzl = NULL;
-#endif
 	int debug=0,olb64=0,nosalt=0;
 	const EVP_CIPHER *cipher=NULL,*c;
-	EVP_CIPHER_CTX *ctx = NULL;
 	char *inf=NULL,*outf=NULL;
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
 #define PROG_NAME_SIZE  39
 	char pname[PROG_NAME_SIZE+1];
-#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
-#endif
-	const EVP_MD *dgst=NULL;
 
 	apps_startup();
 
@@ -143,18 +134,9 @@ int MAIN(int argc, char **argv)
 	program_name(argv[0],pname,sizeof pname);
 	if (strcmp(pname,"base64") == 0)
 		base64=1;
-#ifdef ZLIB
-	if (strcmp(pname,"zlib") == 0)
-		do_zlib=1;
-#endif
 
 	cipher=EVP_get_cipherbyname(pname);
-#ifdef ZLIB
-	if (!do_zlib && !base64 && (cipher == NULL)
-				&& (strcmp(pname,"enc") != 0))
-#else
 	if (!base64 && (cipher == NULL) && (strcmp(pname,"enc") != 0))
-#endif
 		{
 		BIO_printf(bio_err,"%s is an unknown cipher\n",pname);
 		goto bad;
@@ -181,13 +163,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passarg= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
@@ -210,10 +190,6 @@ int MAIN(int argc, char **argv)
 			base64=1;
 		else if	(strcmp(*argv,"-base64") == 0)
 			base64=1;
-#ifdef ZLIB
-		else if	(strcmp(*argv,"-z") == 0)
-			do_zlib=1;
-#endif
 		else if (strcmp(*argv,"-bufsize") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -240,12 +216,7 @@ int MAIN(int argc, char **argv)
 				goto bad;
 				}
 			buf[0]='\0';
-			if (!fgets(buf,sizeof buf,infile))
-				{
-				BIO_printf(bio_err,"unable to read key from '%s'\n",
-					file);
-				goto bad;
-				}
+			fgets(buf,sizeof buf,infile);
 			fclose(infile);
 			i=strlen(buf);
 			if ((i > 0) &&
@@ -276,11 +247,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			hiv= *(++argv);
 			}
-		else if (strcmp(*argv,"-md") == 0)
-			{
-			if (--argc < 1) goto bad;
-			md= *(++argv);
-			}
 		else if	((argv[0][0] == '-') &&
 			((c=EVP_get_cipherbyname(&(argv[0][1]))) != NULL))
 			{
@@ -299,18 +265,12 @@ bad:
 			BIO_printf(bio_err,"%-14s encrypt\n","-e");
 			BIO_printf(bio_err,"%-14s decrypt\n","-d");
 			BIO_printf(bio_err,"%-14s base64 encode/decode, depending on encryption flag\n","-a/-base64");
-			BIO_printf(bio_err,"%-14s passphrase is the next argument\n","-k");
-			BIO_printf(bio_err,"%-14s passphrase is the first line of the file argument\n","-kfile");
-			BIO_printf(bio_err,"%-14s the next argument is the md to use to create a key\n","-md");
-			BIO_printf(bio_err,"%-14s   from a passphrase.  One of md2, md5, sha or sha1\n","");
-			BIO_printf(bio_err,"%-14s salt in hex is the next argument\n","-S");
+			BIO_printf(bio_err,"%-14s key is the next argument\n","-k");
+			BIO_printf(bio_err,"%-14s key is the first line of the file argument\n","-kfile");
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
-			BIO_printf(bio_err,"%-14s disable standard block padding\n","-nopad");
-#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
-#endif
 
 			BIO_printf(bio_err,"Cipher Types\n");
 			OBJ_NAME_do_all_sorted(OBJ_NAME_TYPE_CIPHER_METH,
@@ -324,20 +284,7 @@ bad:
 		argv++;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
-
-	if (md && (dgst=EVP_get_digestbyname(md)) == NULL)
-		{
-		BIO_printf(bio_err,"%s is an unsupported message digest type\n",md);
-		goto end;
-		}
-
-	if (dgst == NULL)
-		{
-		dgst = EVP_md5();
-		}
+        e = setup_engine(bio_err, engine, 0);
 
 	if (bufsize != NULL)
 		{
@@ -362,7 +309,7 @@ bad:
 			}
 
 		/* It must be large enough for a base64 encoded line */
-		if (base64 && n < 80) n=80;
+		if (n < 80) n=80;
 
 		bsize=(int)n;
 		if (verbose) BIO_printf(bio_err,"bufsize=%d\n",bsize);
@@ -387,18 +334,12 @@ bad:
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		BIO_set_callback(out,BIO_debug_callback);
-		BIO_set_callback_arg(in,(char *)bio_err);
-		BIO_set_callback_arg(out,(char *)bio_err);
+		BIO_set_callback_arg(in,bio_err);
+		BIO_set_callback_arg(out,bio_err);
 		}
 
 	if (inf == NULL)
-	        {
-#ifndef OPENSSL_NO_SETVBUF_IONBF
-		if (bufsize != NULL)
-			setvbuf(stdin, (char *)NULL, _IONBF, 0);
-#endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-	        }
 	else
 		{
 		if (BIO_read_filename(in,inf) <= 0)
@@ -422,9 +363,9 @@ bad:
 			{
 			char buf[200];
 
-			BIO_snprintf(buf,sizeof buf,"enter %s %s password:",
-				     OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
-				     (enc)?"encryption":"decryption");
+			sprintf(buf,"enter %s %s password:",
+				OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
+				(enc)?"encryption":"decryption");
 			strbuf[0]='\0';
 			i=EVP_read_pw_string((char *)strbuf,SIZE,buf,enc);
 			if (i == 0)
@@ -449,10 +390,6 @@ bad:
 	if (outf == NULL)
 		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifndef OPENSSL_NO_SETVBUF_IONBF
-		if (bufsize != NULL)
-			setvbuf(stdout, (char *)NULL, _IONBF, 0);
-#endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 #ifdef OPENSSL_SYS_VMS
 		{
 		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
@@ -472,19 +409,6 @@ bad:
 	rbio=in;
 	wbio=out;
 
-#ifdef ZLIB
-
-	if (do_zlib)
-		{
-		if ((bzl=BIO_new(BIO_f_zlib())) == NULL)
-			goto end;
-		if (enc)
-			wbio=BIO_push(bzl,wbio);
-		else
-			rbio=BIO_push(bzl,rbio);
-		}
-#endif
-
 	if (base64)
 		{
 		if ((b64=BIO_new(BIO_f_base64())) == NULL)
@@ -492,7 +416,7 @@ bad:
 		if (debug)
 			{
 			BIO_set_callback(b64,BIO_debug_callback);
-			BIO_set_callback_arg(b64,(char *)bio_err);
+			BIO_set_callback_arg(b64,bio_err);
 			}
 		if (olb64)
 			BIO_set_flags(b64,BIO_FLAGS_BASE64_NO_NL);
@@ -549,7 +473,7 @@ bad:
 				sptr = salt;
 			}
 
-			EVP_BytesToKey(cipher,dgst,sptr,
+			EVP_BytesToKey(cipher,EVP_md5(),sptr,
 				(unsigned char *)str,
 				strlen(str),1,key,iv);
 			/* zero the complete buffer or the string
@@ -566,8 +490,7 @@ bad:
 			BIO_printf(bio_err,"invalid hex iv value\n");
 			goto end;
 			}
-		if ((hiv == NULL) && (str == NULL)
-		    && EVP_CIPHER_iv_length(cipher) != 0)
+		if ((hiv == NULL) && (str == NULL))
 			{
 			/* No IV was explicitly set and no IV was generated
 			 * during EVP_BytesToKey. Hence the IV is undefined,
@@ -583,35 +506,17 @@ bad:
 
 		if ((benc=BIO_new(BIO_f_cipher())) == NULL)
 			goto end;
-
-		/* Since we may be changing parameters work on the encryption
-		 * context rather than calling BIO_set_cipher().
-		 */
-
-		BIO_get_cipher_ctx(benc, &ctx);
-		if (!EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, enc))
-			{
-			BIO_printf(bio_err, "Error setting cipher %s\n",
-				EVP_CIPHER_name(cipher));
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-
+		BIO_set_cipher(benc,cipher,key,iv,enc);
 		if (nopad)
-			EVP_CIPHER_CTX_set_padding(ctx, 0);
-
-		if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, iv, enc))
 			{
-			BIO_printf(bio_err, "Error setting cipher %s\n",
-				EVP_CIPHER_name(cipher));
-			ERR_print_errors(bio_err);
-			goto end;
+			EVP_CIPHER_CTX *ctx;
+			BIO_get_cipher_ctx(benc, &ctx);
+			EVP_CIPHER_CTX_set_padding(ctx, 0);
 			}
-
 		if (debug)
 			{
 			BIO_set_callback(benc,BIO_debug_callback);
-			BIO_set_callback_arg(benc,(char *)bio_err);
+			BIO_set_callback_arg(benc,bio_err);
 			}
 
 		if (printkey)
@@ -619,7 +524,7 @@ bad:
 			if (!nosalt)
 				{
 				printf("salt=");
-				for (i=0; i<(int)sizeof(salt); i++)
+				for (i=0; i<sizeof salt; i++)
 					printf("%02X",salt[i]);
 				printf("\n");
 				}
@@ -679,9 +584,6 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (benc != NULL) BIO_free(benc);
 	if (b64 != NULL) BIO_free(b64);
-#ifdef ZLIB
-	if (bzl != NULL) BIO_free(bzl);
-#endif
 	if(pass) OPENSSL_free(pass);
 	apps_shutdown();
 	OPENSSL_EXIT(ret);

apps/engine.c

@@ -56,7 +56,6 @@
  *
  */
 
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -65,22 +64,20 @@
 #endif
 #include "apps.h"
 #include <openssl/err.h>
-#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #include <openssl/ssl.h>
 
 #undef PROG
 #define PROG	engine_main
 
-static const char *engine_usage[]={
+static char *engine_usage[]={
 "usage: engine opts [engine ...]\n",
 " -v[v[v[v]]] - verbose mode, for each engine, list its 'control commands'\n",
 "               -vv will additionally display each command's description\n",
 "               -vvv will also add the input flags for each command\n",
 "               -vvvv will also show internal input flags\n",
 " -c          - for each engine, also list the capabilities\n",
-" -t[t]       - for each engine, check that they are really available\n",
-"               -tt will display error trace for unavailable engines\n",
+" -t          - for each engine, check that they are really available\n",
 " -pre <cmd>  - runs command 'cmd' against the ENGINE before any attempts\n",
 "               to load it (if -t is used)\n",
 " -post <cmd> - runs command 'cmd' against the ENGINE after loading it\n",
@@ -92,7 +89,7 @@ static const char *engine_usage[]={
 NULL
 };
 
-static void identity(char *ptr)
+static void identity(void *ptr)
 	{
 	return;
 	}
@@ -123,8 +120,8 @@ static int append_buf(char **buf, const char *s, int *size, int step)
 		return 0;
 
 	if (**buf != '\0')
-		BUF_strlcat(*buf, ", ", *size);
-	BUF_strlcat(*buf, s, *size);
+		strcat(*buf, ", ");
+	strcat(*buf, s);
 
 	return 1;
 	}
@@ -148,6 +145,11 @@ static int util_flags(BIO *bio_out, unsigned int flags, const char *indent)
 
 	if(flags & ENGINE_CMD_FLAG_NUMERIC)
 		{
+		if(started)
+			{
+			BIO_printf(bio_out, "|");
+			err = 1;
+			}
 		BIO_printf(bio_out, "NUMERIC");
 		started = 1;
 		}
@@ -200,7 +202,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 	char *desc = NULL;
 	int flags;
 	int xpos = 0;
-	STACK_OF(OPENSSL_STRING) *cmds = NULL;
+	STACK *cmds = NULL;
 	if(!ENGINE_ctrl(e, ENGINE_CTRL_HAS_CTRL_FUNCTION, 0, NULL, NULL) ||
 			((num = ENGINE_ctrl(e, ENGINE_CTRL_GET_FIRST_CMD_TYPE,
 					0, NULL, NULL)) <= 0))
@@ -211,7 +213,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 		return 1;
 		}
 
-	cmds = sk_OPENSSL_STRING_new_null();
+	cmds = sk_new_null();
 
 	if(!cmds)
 		goto err;
@@ -247,7 +249,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
                         /* Now decide on the output */
                         if(xpos == 0)
                                 /* Do an indent */
-                                xpos = BIO_puts(bio_out, indent);
+                                xpos = BIO_printf(bio_out, indent);
                         else
                                 /* Otherwise prepend a ", " */
                                 xpos += BIO_printf(bio_out, ", ");
@@ -258,7 +260,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 					(xpos + (int)strlen(name) > line_wrap))
                                         {
                                         BIO_printf(bio_out, "\n");
-                                        xpos = BIO_puts(bio_out, indent);
+                                        xpos = BIO_printf(bio_out, indent);
                                         }
                                 xpos += BIO_printf(bio_out, "%s", name);
                                 }
@@ -284,17 +286,15 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 		BIO_printf(bio_out, "\n");
 	ret = 1;
 err:
-	if(cmds) sk_OPENSSL_STRING_pop_free(cmds, identity);
+	if(cmds) sk_pop_free(cmds, identity);
 	if(name) OPENSSL_free(name);
 	if(desc) OPENSSL_free(desc);
 	return ret;
 	}
 
-static void util_do_cmds(ENGINE *e, STACK_OF(OPENSSL_STRING) *cmds,
-			BIO *bio_out, const char *indent)
+static void util_do_cmds(ENGINE *e, STACK *cmds, BIO *bio_out, const char *indent)
 	{
-	int loop, res, num = sk_OPENSSL_STRING_num(cmds);
-
+	int loop, res, num = sk_num(cmds);
 	if(num < 0)
 		{
 		BIO_printf(bio_out, "[Error]: internal stack error\n");
@@ -304,7 +304,7 @@ static void util_do_cmds(ENGINE *e, STACK_OF(OPENSSL_STRING) *cmds,
 		{
 		char buf[256];
 		const char *cmd, *arg;
-		cmd = sk_OPENSSL_STRING_value(cmds, loop);
+		cmd = sk_value(cmds, loop);
 		res = 1; /* assume success */
 		/* Check if this command has no ":arg" */
 		if((arg = strstr(cmd, ":")) == NULL)
@@ -341,12 +341,12 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
-	const char **pp;
-	int verbose=0, list_cap=0, test_avail=0, test_avail_noise = 0;
+	char **pp;
+	int verbose=0, list_cap=0, test_avail=0;
 	ENGINE *e;
-	STACK_OF(OPENSSL_STRING) *engines = sk_OPENSSL_STRING_new_null();
-	STACK_OF(OPENSSL_STRING) *pre_cmds = sk_OPENSSL_STRING_new_null();
-	STACK_OF(OPENSSL_STRING) *post_cmds = sk_OPENSSL_STRING_new_null();
+	STACK *engines = sk_new_null();
+	STACK *pre_cmds = sk_new_null();
+	STACK *post_cmds = sk_new_null();
 	int badops=1;
 	BIO *bio_out=NULL;
 	const char *indent = "     ";
@@ -380,33 +380,23 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-c") == 0)
 			list_cap=1;
-		else if (strncmp(*argv,"-t",2) == 0)
-			{
+		else if (strcmp(*argv,"-t") == 0)
 			test_avail=1;
-			if(strspn(*argv + 1, "t") < strlen(*argv + 1))
-				goto skip_arg_loop;
-			if((test_avail_noise = strlen(*argv + 1) - 1) > 1)
-				goto skip_arg_loop;
-			}
 		else if (strcmp(*argv,"-pre") == 0)
 			{
 			argc--; argv++;
-			if (argc == 0)
-				goto skip_arg_loop;
-			sk_OPENSSL_STRING_push(pre_cmds,*argv);
+			sk_push(pre_cmds,*argv);
 			}
 		else if (strcmp(*argv,"-post") == 0)
 			{
 			argc--; argv++;
-			if (argc == 0)
-				goto skip_arg_loop;
-			sk_OPENSSL_STRING_push(post_cmds,*argv);
+			sk_push(post_cmds,*argv);
 			}
 		else if ((strncmp(*argv,"-h",2) == 0) ||
 				(strcmp(*argv,"-?") == 0))
 			goto skip_arg_loop;
 		else
-			sk_OPENSSL_STRING_push(engines,*argv);
+			sk_push(engines,*argv);
 		argc--;
 		argv++;
 		}
@@ -421,17 +411,17 @@ skip_arg_loop:
 		goto end;
 		}
 
-	if (sk_OPENSSL_STRING_num(engines) == 0)
+	if (sk_num(engines) == 0)
 		{
 		for(e = ENGINE_get_first(); e != NULL; e = ENGINE_get_next(e))
 			{
-			sk_OPENSSL_STRING_push(engines,(char *)ENGINE_get_id(e));
+			sk_push(engines,(char *)ENGINE_get_id(e));
 			}
 		}
 
-	for (i=0; i<sk_OPENSSL_STRING_num(engines); i++)
+	for (i=0; i<sk_num(engines); i++)
 		{
-		const char *id = sk_OPENSSL_STRING_value(engines,i);
+		const char *id = sk_value(engines,i);
 		if ((e = ENGINE_by_id(id)) != NULL)
 			{
 			const char *name = ENGINE_get_name(e);
@@ -451,7 +441,6 @@ skip_arg_loop:
 				const int *nids;
 				ENGINE_CIPHERS_PTR fn_c;
 				ENGINE_DIGESTS_PTR fn_d;
-				ENGINE_PKEY_METHS_PTR fn_pk;
 
 				if (ENGINE_get_RSA(e) != NULL
 					&& !append_buf(&cap_buf, "RSA",
@@ -490,15 +479,6 @@ skip_ciphers:
 						goto end;
 
 skip_digests:
-				fn_pk = ENGINE_get_pkey_meths(e);
-				if(!fn_pk) goto skip_pmeths;
-				n = fn_pk(e, NULL, &nids, 0);
-				for(k=0 ; k < n ; ++k)
-					if(!append_buf(&cap_buf,
-						       OBJ_nid2sn(nids[k]),
-						       &cap_size, 256))
-						goto end;
-skip_pmeths:
 				if (cap_buf && (*cap_buf != '\0'))
 					BIO_printf(bio_out, " [%s]\n", cap_buf);
 
@@ -516,8 +496,7 @@ skip_pmeths:
 				else
 					{
 					BIO_printf(bio_out, "[ unavailable ]\n");
-					if(test_avail_noise)
-						ERR_print_errors_fp(stdout);
+					ERR_print_errors_fp(stdout);
 					ERR_clear_error();
 					}
 				}
@@ -531,19 +510,11 @@ skip_pmeths:
 
 	ret=0;
 end:
-
 	ERR_print_errors(bio_err);
-	sk_OPENSSL_STRING_pop_free(engines, identity);
-	sk_OPENSSL_STRING_pop_free(pre_cmds, identity);
-	sk_OPENSSL_STRING_pop_free(post_cmds, identity);
+	sk_pop_free(engines, identity);
+	sk_pop_free(pre_cmds, identity);
+	sk_pop_free(post_cmds, identity);
 	if (bio_out != NULL) BIO_free_all(bio_out);
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
-#else
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
-#endif

apps/errstr.c

@@ -97,12 +97,10 @@ int MAIN(int argc, char **argv)
 			out = BIO_push(tmpbio, out);
 			}
 #endif
-			lh_ERR_STRING_DATA_node_stats_bio(
-						  ERR_get_string_table(), out);
-			lh_ERR_STRING_DATA_stats_bio(ERR_get_string_table(),
-						     out);
-			lh_ERR_STRING_DATA_node_usage_stats_bio(
-						    ERR_get_string_table(),out);
+			lh_node_stats_bio((LHASH *)ERR_get_string_table(),out);
+			lh_stats_bio((LHASH *)ERR_get_string_table(),out);
+			lh_node_usage_stats_bio((LHASH *)
+				ERR_get_string_table(),out);
 			}
 		if (out != NULL) BIO_free_all(out);
 		argc--;

apps/gendh.c

@@ -57,13 +57,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <string.h>
@@ -82,26 +75,23 @@
 #undef PROG
 #define PROG gendh_main
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dh_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	BN_GENCB cb;
+	ENGINE *e = NULL;
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
 	char *inrand=NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 	BIO *out=NULL;
 
 	apps_startup();
 
-	BN_GENCB_set(&cb, dh_cb, bio_err);
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
@@ -125,13 +115,11 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -150,18 +138,14 @@ bad:
 		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
 	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
 		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 		
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
+        e = setup_engine(bio_err, engine, 0);
 
 	out=BIO_new(BIO_s_file());
 	if (out == NULL)
@@ -199,10 +183,10 @@ bad:
 
 	BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 	BIO_printf(bio_err,"This is going to take a long time\n");
-
-	if(((dh = DH_new()) == NULL) || !DH_generate_parameters_ex(dh, num, g, &cb))
-		goto end;
+	dh=DH_generate_parameters(num,g,dh_cb,bio_err);
 		
+	if (dh == NULL) goto end;
+
 	app_RAND_write_file(NULL, bio_err);
 
 	if (!PEM_write_bio_DHparams(out,dh))
@@ -217,7 +201,7 @@ end:
 	OPENSSL_EXIT(ret);
 	}
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -225,17 +209,10 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
-#else /* !OPENSSL_NO_DH */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/gendsa.c

@@ -56,7 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
 #ifndef OPENSSL_NO_DSA
 #include <stdio.h>
 #include <string.h>
@@ -78,6 +77,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -85,9 +85,7 @@ int MAIN(int argc, char **argv)
 	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
 	const EVP_CIPHER *enc=NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
@@ -113,13 +111,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -137,10 +133,6 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
-#ifndef OPENSSL_NO_SEED
-		else if (strcmp(*argv,"-seed") == 0)
-			enc=EVP_seed_cbc();
-#endif
 #ifndef OPENSSL_NO_AES
 		else if (strcmp(*argv,"-aes128") == 0)
 			enc=EVP_aes_128_cbc();
@@ -148,14 +140,6 @@ int MAIN(int argc, char **argv)
 			enc=EVP_aes_192_cbc();
 		else if (strcmp(*argv,"-aes256") == 0)
 			enc=EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (strcmp(*argv,"-camellia128") == 0)
-			enc=EVP_camellia_128_cbc();
-		else if (strcmp(*argv,"-camellia192") == 0)
-			enc=EVP_camellia_192_cbc();
-		else if (strcmp(*argv,"-camellia256") == 0)
-			enc=EVP_camellia_256_cbc();
 #endif
 		else if (**argv != '-' && dsaparams == NULL)
 			{
@@ -179,21 +163,11 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
 #endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
-#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
-#endif
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
@@ -202,9 +176,7 @@ bad:
 		goto end;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
+        e = setup_engine(bio_err, engine, 0);
 
 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
 		BIO_printf(bio_err, "Error getting password\n");
@@ -276,10 +248,4 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
-#else /* !OPENSSL_NO_DSA */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/genpkey.c

@@ -1,440 +0,0 @@
-/* apps/genpkey.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
- * project 2006
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <stdio.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/pem.h>
-#include <openssl/err.h>
-#include <openssl/evp.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-static int init_keygen_file(BIO *err, EVP_PKEY_CTX **pctx,
-				const char *file, ENGINE *e);
-static int genpkey_cb(EVP_PKEY_CTX *ctx);
-
-#define PROG genpkey_main
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-	{
-	ENGINE *e = NULL;
-	char **args, *outfile = NULL;
-	char *passarg = NULL;
-	BIO *in = NULL, *out = NULL;
-	const EVP_CIPHER *cipher = NULL;
-	int outformat;
-	int text = 0;
-	EVP_PKEY *pkey=NULL;
-	EVP_PKEY_CTX *ctx = NULL;
-	char *pass = NULL;
-	int badarg = 0;
-	int ret = 1, rv;
-
-	int do_param = 0;
-
-	if (bio_err == NULL)
-		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	outformat=FORMAT_PEM;
-
-	ERR_load_crypto_strings();
-	OpenSSL_add_all_algorithms();
-	args = argv + 1;
-	while (!badarg && *args && *args[0] == '-')
-		{
-		if (!strcmp(*args,"-outform"))
-			{
-			if (args[1])
-				{
-				args++;
-				outformat=str2fmt(*args);
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp(*args,"-pass"))
-			{
-			if (!args[1]) goto bad;
-			passarg= *(++args);
-			}
-#ifndef OPENSSL_NO_ENGINE
-		else if (strcmp(*args,"-engine") == 0)
-			{
-			if (!args[1])
-				goto bad;
-        		e = setup_engine(bio_err, *(++args), 0);
-			}
-#endif
-		else if (!strcmp (*args, "-paramfile"))
-			{
-			if (!args[1])
-				goto bad;
-			args++;
-			if (do_param == 1)
-				goto bad;
-			if (!init_keygen_file(bio_err, &ctx, *args, e))
-				goto end;
-			}
-		else if (!strcmp (*args, "-out"))
-			{
-			if (args[1])
-				{
-				args++;
-				outfile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (strcmp(*args,"-algorithm") == 0)
-			{
-			if (!args[1])
-				goto bad;
-			if (!init_gen_str(bio_err, &ctx, *(++args),e, do_param))
-				goto end;
-			}
-		else if (strcmp(*args,"-pkeyopt") == 0)
-			{
-			if (!args[1])
-				goto bad;
-			if (!ctx)
-				{
-				BIO_puts(bio_err, "No keytype specified\n");
-				goto bad;
-				}
-			else if (pkey_ctrl_string(ctx, *(++args)) <= 0)
-				{
-				BIO_puts(bio_err, "parameter setting error\n");
-				ERR_print_errors(bio_err);
-				goto end;
-				}
-			}
-		else if (strcmp(*args,"-genparam") == 0)
-			{
-			if (ctx)
-				goto bad;
-			do_param = 1;
-			}
-		else if (strcmp(*args,"-text") == 0)
-			text=1;
-		else
-			{
-			cipher = EVP_get_cipherbyname(*args + 1);
-			if (!cipher)
-				{
-				BIO_printf(bio_err, "Unknown cipher %s\n",
-								*args + 1);
-				badarg = 1;
-				}
-			if (do_param == 1)
-				badarg = 1;
-			}
-		args++;
-		}
-
-	if (!ctx)
-		badarg = 1;
-
-	if (badarg)
-		{
-		bad:
-		BIO_printf(bio_err, "Usage: genpkey [options]\n");
-		BIO_printf(bio_err, "where options may be\n");
-		BIO_printf(bio_err, "-out file          output file\n");
-		BIO_printf(bio_err, "-outform X         output format (DER or PEM)\n");
-		BIO_printf(bio_err, "-pass arg          output file pass phrase source\n");
-		BIO_printf(bio_err, "-<cipher>          use cipher <cipher> to encrypt the key\n");
-#ifndef OPENSSL_NO_ENGINE
-		BIO_printf(bio_err, "-engine e          use engine e, possibly a hardware device.\n");
-#endif
-		BIO_printf(bio_err, "-paramfile file    parameters file\n");
-		BIO_printf(bio_err, "-algorithm alg     the public key algorithm\n");
-		BIO_printf(bio_err, "-pkeyopt opt:value set the public key algorithm option <opt>\n"
-				            "                   to value <value>\n");
-		BIO_printf(bio_err, "-genparam          generate parameters, not key\n");
-		BIO_printf(bio_err, "-text              print the in text\n");
-		BIO_printf(bio_err, "NB: options order may be important!  See the manual page.\n");
-		goto end;
-		}
-
-	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
-		{
-		BIO_puts(bio_err, "Error getting password\n");
-		goto end;
-		}
-
-	if (outfile)
-		{
-		if (!(out = BIO_new_file (outfile, "wb")))
-			{
-			BIO_printf(bio_err,
-				 "Can't open output file %s\n", outfile);
-			goto end;
-			}
-		}
-	else
-		{
-		out = BIO_new_fp (stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
-		}
-
-	EVP_PKEY_CTX_set_cb(ctx, genpkey_cb);
-	EVP_PKEY_CTX_set_app_data(ctx, bio_err);
-
-	if (do_param)
-		{
-		if (EVP_PKEY_paramgen(ctx, &pkey) <= 0)
-			{
-			BIO_puts(bio_err, "Error generating parameters\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		}
-	else
-		{
-		if (EVP_PKEY_keygen(ctx, &pkey) <= 0)
-			{
-			BIO_puts(bio_err, "Error generating key\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		}
-
-	if (do_param)
-		rv = PEM_write_bio_Parameters(out, pkey);
-	else if (outformat == FORMAT_PEM) 
-		rv = PEM_write_bio_PrivateKey(out, pkey, cipher, NULL, 0,
-								NULL, pass);
-	else if (outformat == FORMAT_ASN1)
-		rv = i2d_PrivateKey_bio(out, pkey);
-	else
-		{
-		BIO_printf(bio_err, "Bad format specified for key\n");
-		goto end;
-		}
-
-	if (rv <= 0)
-		{
-		BIO_puts(bio_err, "Error writing key\n");
-		ERR_print_errors(bio_err);
-		}
-
-	if (text)
-		{
-		if (do_param)
-			rv = EVP_PKEY_print_params(out, pkey, 0, NULL);
-		else
-			rv = EVP_PKEY_print_private(out, pkey, 0, NULL);
-
-		if (rv <= 0)
-			{
-			BIO_puts(bio_err, "Error printing key\n");
-			ERR_print_errors(bio_err);
-			}
-		}
-
-	ret = 0;
-
-	end:
-	if (pkey)
-		EVP_PKEY_free(pkey);
-	if (ctx)
-		EVP_PKEY_CTX_free(ctx);
-	if (out)
-		BIO_free_all(out);
-	BIO_free(in);
-	if (pass)
-		OPENSSL_free(pass);
-
-	return ret;
-	}
-
-static int init_keygen_file(BIO *err, EVP_PKEY_CTX **pctx,
-				const char *file, ENGINE *e)
-	{
-	BIO *pbio;
-	EVP_PKEY *pkey = NULL;
-	EVP_PKEY_CTX *ctx = NULL;
-	if (*pctx)
-		{
-		BIO_puts(err, "Parameters already set!\n");
-		return 0;
-		}
-
-	pbio = BIO_new_file(file, "r");
-	if (!pbio)
-		{
-		BIO_printf(err, "Can't open parameter file %s\n", file);
-		return 0;
-		}
-
-	pkey = PEM_read_bio_Parameters(pbio, NULL);
-	BIO_free(pbio);
-
-	if (!pkey)
-		{
-		BIO_printf(bio_err, "Error reading parameter file %s\n", file);
-		return 0;
-		}
-
-	ctx = EVP_PKEY_CTX_new(pkey, e);
-	if (!ctx)
-		goto err;
-	if (EVP_PKEY_keygen_init(ctx) <= 0)
-		goto err;
-	EVP_PKEY_free(pkey);
-	*pctx = ctx;
-	return 1;
-
-	err:
-	BIO_puts(err, "Error initializing context\n");
-	ERR_print_errors(err);
-	if (ctx)
-		EVP_PKEY_CTX_free(ctx);
-	if (pkey)
-		EVP_PKEY_free(pkey);
-	return 0;
-
-	}
-
-int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
-			const char *algname, ENGINE *e, int do_param)
-	{
-	EVP_PKEY_CTX *ctx = NULL;
-	const EVP_PKEY_ASN1_METHOD *ameth;
-	ENGINE *tmpeng = NULL;
-	int pkey_id;
-
-	if (*pctx)
-		{
-		BIO_puts(err, "Algorithm already set!\n");
-		return 0;
-		}
-
-	ameth = EVP_PKEY_asn1_find_str(&tmpeng, algname, -1);
-
-#ifndef OPENSSL_NO_ENGINE
-	if (!ameth && e)
-		ameth = ENGINE_get_pkey_asn1_meth_str(e, algname, -1);
-#endif
-
-	if (!ameth)
-		{
-		BIO_printf(bio_err, "Algorithm %s not found\n", algname);
-		return 0;
-		}
-
-	ERR_clear_error();
-
-	EVP_PKEY_asn1_get0_info(&pkey_id, NULL, NULL, NULL, NULL, ameth);
-#ifndef OPENSSL_NO_ENGINE
-	if (tmpeng)
-		ENGINE_finish(tmpeng);
-#endif
-	ctx = EVP_PKEY_CTX_new_id(pkey_id, e);
-
-	if (!ctx)
-		goto err;
-	if (do_param)
-		{
-		if (EVP_PKEY_paramgen_init(ctx) <= 0)
-			goto err;
-		}
-	else
-		{
-		if (EVP_PKEY_keygen_init(ctx) <= 0)
-			goto err;
-		}
-
-	*pctx = ctx;
-	return 1;
-
-	err:
-	BIO_printf(err, "Error initializing %s context\n", algname);
-	ERR_print_errors(err);
-	if (ctx)
-		EVP_PKEY_CTX_free(ctx);
-	return 0;
-
-	}
-
-static int genpkey_cb(EVP_PKEY_CTX *ctx)
-	{
-	char c='*';
-	BIO *b = EVP_PKEY_CTX_get_app_data(ctx);
-	int p;
-	p = EVP_PKEY_CTX_get_keygen_info(ctx, 0);
-	if (p == 0) c='.';
-	if (p == 1) c='+';
-	if (p == 2) c='*';
-	if (p == 3) c='\n';
-	BIO_write(b,&c,1);
-	(void)BIO_flush(b);
-#ifdef LINT
-	p=n;
-#endif
-	return 1;
-	}

apps/genrsa.c

@@ -56,13 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #ifndef OPENSSL_NO_RSA
 #include <stdio.h>
 #include <string.h>
@@ -82,36 +75,26 @@
 #undef PROG
 #define PROG genrsa_main
 
-static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK genrsa_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	BN_GENCB cb;
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	int ret=1;
-	int non_fips_allow = 0;
+	RSA *rsa=NULL;
 	int i,num=DEFBITS;
 	long l;
 	const EVP_CIPHER *enc=NULL;
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
 	char *passargout = NULL, *passout = NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 	char *inrand=NULL;
 	BIO *out=NULL;
-	BIGNUM *bn = BN_new();
-	RSA *rsa = NULL;
-
-	if(!bn) goto err;
 
 	apps_startup();
-	BN_GENCB_set(&cb, genrsa_cb, bio_err);
 
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
@@ -139,13 +122,11 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -161,10 +142,6 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
-#ifndef OPENSSL_NO_SEED
-		else if (strcmp(*argv,"-seed") == 0)
-			enc=EVP_seed_cbc();
-#endif
 #ifndef OPENSSL_NO_AES
 		else if (strcmp(*argv,"-aes128") == 0)
 			enc=EVP_aes_128_cbc();
@@ -172,22 +149,12 @@ int MAIN(int argc, char **argv)
 			enc=EVP_aes_192_cbc();
 		else if (strcmp(*argv,"-aes256") == 0)
 			enc=EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (strcmp(*argv,"-camellia128") == 0)
-			enc=EVP_camellia_128_cbc();
-		else if (strcmp(*argv,"-camellia192") == 0)
-			enc=EVP_camellia_192_cbc();
-		else if (strcmp(*argv,"-camellia256") == 0)
-			enc=EVP_camellia_256_cbc();
 #endif
 		else if (strcmp(*argv,"-passout") == 0)
 			{
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-		else if (strcmp(*argv,"-non-fips-allow") == 0)
-			non_fips_allow = 1;
 		else
 			break;
 		argv++;
@@ -202,25 +169,15 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt the generated key with IDEA in cbc mode\n");
 #endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
-#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf(bio_err," -out file       output the key to 'file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
 		BIO_printf(bio_err," -3              use 3 for the E value\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"                 the random number generator\n");
@@ -234,9 +191,7 @@ bad:
 		goto err;
 	}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if (outfile == NULL)
 		{
@@ -268,22 +223,12 @@ bad:
 
 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
-#ifdef OPENSSL_NO_ENGINE
-	rsa = RSA_new();
-#else
-	rsa = RSA_new_method(e);
-#endif
-	if (!rsa)
-		goto err;
-
-	if (non_fips_allow)
-		rsa->flags |= RSA_FLAG_NON_FIPS_ALLOW;
-
-	if(!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
-		goto err;
+	rsa=RSA_generate_key(num,f4,genrsa_cb,bio_err);
 		
 	app_RAND_write_file(NULL, bio_err);
 
+	if (rsa == NULL) goto err;
+	
 	/* We need to do the following for when the base number size is <
 	 * long, esp windows 3.1 :-(. */
 	l=0L;
@@ -307,9 +252,8 @@ bad:
 
 	ret=0;
 err:
-	if (bn) BN_free(bn);
-	if (rsa) RSA_free(rsa);
-	if (out) BIO_free_all(out);
+	if (rsa != NULL) RSA_free(rsa);
+	if (out != NULL) BIO_free_all(out);
 	if(passout) OPENSSL_free(passout);
 	if (ret != 0)
 		ERR_print_errors(bio_err);
@@ -317,7 +261,7 @@ err:
 	OPENSSL_EXIT(ret);
 	}
 
-static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -325,12 +269,11 @@ static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
 #else /* !OPENSSL_NO_RSA */
 

apps/install-apps.com

@@ -1,107 +0,0 @@
-$! INSTALL.COM -- Installs the files in a given directory tree
-$!
-$! Author: Richard Levitte <richard@levitte.org>
-$! Time of creation: 22-MAY-1998 10:13
-$!
-$! P1  root of the directory tree
-$! P2  "64" for 64-bit pointers.
-$!
-$!
-$! Announce/identify.
-$!
-$ proc = f$environment( "procedure")
-$ write sys$output "@@@ "+ -
-   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
-$!
-$ on error then goto tidy
-$ on control_c then goto tidy
-$!
-$ if (p1 .eqs. "")
-$ then
-$   write sys$output "First argument missing."
-$   write sys$output -
-     "It should be the directory where you want things installed."
-$   exit
-$ endif
-$!
-$ if (f$getsyi("cpu") .lt. 128)
-$ then
-$   arch = "VAX"
-$ else
-$   arch = f$edit( f$getsyi( "arch_name"), "upcase")
-$   if (arch .eqs. "") then arch = "UNK"
-$ endif
-$!
-$ archd = arch
-$!
-$ if (p2 .nes. "")
-$ then
-$   if (p2 .eqs. "64")
-$   then
-$     archd = arch+ "_64"
-$   else
-$     if (p2 .nes. "32")
-$     then
-$       write sys$output "Second argument invalid."
-$       write sys$output "It should be "32", "64", or nothing."
-$       exit
-$     endif
-$   endif
-$ endif
-$!
-$ root = f$parse( p1, "[]A.;0", , , "syntax_only, no_conceal") - "A.;0"
-$ root_dev = f$parse(root,,,"device","syntax_only")
-$ root_dir = f$parse(root,,,"directory","syntax_only") - -
-   "[000000." - "][" - "[" - "]"
-$ root = root_dev + "[" + root_dir
-$!
-$ define /nolog wrk_sslroot 'root'.] /trans=conc
-$ define /nolog wrk_sslxexe wrk_sslroot:['archd'_exe]
-$!
-$ if f$parse("wrk_sslroot:[000000]") .eqs. "" then -
-   create /directory /log wrk_sslroot:[000000]
-$ if f$parse("wrk_sslxexe:") .eqs. "" then -
-   create /directory /log wrk_sslxexe:
-$!
-$ exe := openssl
-$!
-$ exe_dir := [-.'archd'.exe.apps]
-$!
-$! Executables.
-$!
-$ i = 0
-$ loop_exe:
-$   e = f$edit(f$element( i, ",", exe), "trim")
-$   i = i + 1
-$   if e .eqs. "," then goto loop_exe_end
-$   set noon
-$   file = exe_dir+ e+ ".exe"
-$   if f$search( file) .nes. ""
-$   then
-$     copy /protection = w:re 'file' wrk_sslxexe: /log
-$   endif
-$   set on
-$ goto loop_exe
-$ loop_exe_end:
-$!
-$! Miscellaneous.
-$!
-$ set noon
-$ copy /protection = w:re ca.com wrk_sslxexe:ca.com /log
-$ copy /protection = w:re openssl-vms.cnf wrk_sslroot:[000000]openssl.cnf /log
-$ set on
-$!
-$ tidy:
-$!
-$ call deass wrk_sslroot
-$ call deass wrk_sslxexe
-$!
-$ exit
-$!
-$ deass: subroutine
-$ if (f$trnlnm( p1, "LNM$PROCESS") .nes. "")
-$ then
-$   deassign /process 'p1'
-$ endif
-$ endsubroutine
-$!

apps/install.com

@@ -0,0 +1,69 @@
+$! INSTALL.COM -- Installs the files in a given directory tree
+$!
+$! Author: Richard Levitte <richard@levitte.org>
+$! Time of creation: 22-MAY-1998 10:13
+$!
+$! P1	root of the directory tree
+$!
+$	IF P1 .EQS. ""
+$	THEN
+$	    WRITE SYS$OUTPUT "First argument missing."
+$	    WRITE SYS$OUTPUT "Should be the directory where you want things installed."
+$	    EXIT
+$	ENDIF
+$
+$	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
+$	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
+$	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
+		   - "[000000." - "][" - "[" - "]"
+$	ROOT = ROOT_DEV + "[" + ROOT_DIR
+$
+$	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
+$	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
+$	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
+$	DEFINE/NOLOG WRK_SSLLIB WRK_SSLROOT:[LIB]
+$
+$	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
+$	IF F$PARSE("WRK_SSLVEXE:") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLVEXE:
+$	IF F$PARSE("WRK_SSLAEXE:") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLAEXE:
+$	IF F$PARSE("WRK_SSLLIB:") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLLIB:
+$
+$	EXE := openssl
+$
+$	VEXE_DIR := [-.VAX.EXE.APPS]
+$	AEXE_DIR := [-.AXP.EXE.APPS]
+$
+$	I = 0
+$ LOOP_EXE: 
+$	E = F$EDIT(F$ELEMENT(I, ",", EXE),"TRIM")
+$	I = I + 1
+$	IF E .EQS. "," THEN GOTO LOOP_EXE_END
+$	SET NOON
+$	IF F$SEARCH(VEXE_DIR+E+".EXE") .NES. ""
+$	THEN
+$	  COPY 'VEXE_DIR''E'.EXE WRK_SSLVEXE:'E'.EXE/log
+$	  SET FILE/PROT=W:RE WRK_SSLVEXE:'E'.EXE
+$	ENDIF
+$	IF F$SEARCH(AEXE_DIR+E+".EXE") .NES. ""
+$	THEN
+$	  COPY 'AEXE_DIR''E'.EXE WRK_SSLAEXE:'E'.EXE/log
+$	  SET FILE/PROT=W:RE WRK_SSLAEXE:'E'.EXE
+$	ENDIF
+$	SET ON
+$	GOTO LOOP_EXE
+$ LOOP_EXE_END:
+$
+$	SET NOON
+$	COPY CA.COM WRK_SSLAEXE:CA.COM/LOG
+$	SET FILE/PROT=W:RE WRK_SSLAEXE:CA.COM
+$	COPY CA.COM WRK_SSLVEXE:CA.COM/LOG
+$	SET FILE/PROT=W:RE WRK_SSLVEXE:CA.COM
+$	COPY OPENSSL-VMS.CNF WRK_SSLROOT:[000000]OPENSSL.CNF/LOG
+$	SET FILE/PROT=W:R WRK_SSLROOT:[000000]OPENSSL.CNF
+$	SET ON
+$
+$	EXIT

apps/makeapps.com

@@ -6,12 +6,11 @@ $!               A-Com Computing, Inc.
 $!               byer@mail.all-net.net
 $!
 $!  Changes by Richard Levitte <richard@levitte.org>
-$!             Zoltan Arpadffy <zoli@polarhome.com>   
 $!
 $!  This command files compiles and creates all the various different
 $!  "application" programs for the different types of encryption for OpenSSL.
 $!  The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes
-$!  ALPHA, IA64 or VAX, depending on your machine architecture.
+$!  either AXP or VAX depending on your machine architecture.
 $!
 $!  It was written so it would try to determine what "C" compiler to
 $!  use or you can specify which "C" compiler to use.
@@ -25,7 +24,7 @@ $!	   VAXC	 For VAX C.
 $!	   DECC	 For DEC C.
 $!	   GNUC	 For GNU C.
 $!
-$!  If you don't specify a compiler, it will try to determine which
+$!  If you don't speficy a compiler, it will try to determine which
 $!  "C" compiler to use.
 $!
 $!  P3, if defined, sets a TCP/IP library to use, through one of the following
@@ -39,105 +38,64 @@ $!  P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
 $!
 $!  P5, if defined, sets a choice of programs to compile.
 $!
-$!  P6, if defined, specifies the C pointer size.  Ignored on VAX.
-$!      ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
-$!      Supported values are:
-$!
-$!      ""       Compile with default (/NOPOINTER_SIZE)
-$!      32       Compile with /POINTER_SIZE=32 (SHORT)
-$!      64       Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV])
-$!               (Automatically select ARGV if compiler supports it.)
-$!      64=      Compile with /POINTER_SIZE=64 (LONG).
-$!      64=ARGV  Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
-$!
-$!  P7, if defined, specifies a directory where ZLIB files (zlib.h,
-$!  libz.olb) may be found.  Optionally, a non-default object library
-$!  name may be included ("dev:[dir]libz_64.olb", for example).
-$!
-$!
-$! Announce/identify.
-$!
-$ proc = f$environment( "procedure")
-$ write sys$output "@@@ "+ -
-   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
-$!
-$ on control_c then goto exit
 $!
 $! Define A TCP/IP Library That We Will Need To Link To.
 $! (That Is, If We Need To Link To One.)
 $!
 $ TCPIP_LIB = ""
-$ ZLIB_LIB = ""
 $!
 $! Check What Architecture We Are Using.
 $!
-$ IF (F$GETSYI("CPU").LT.128)
+$ IF (F$GETSYI("CPU").GE.128)
 $ THEN
 $!
-$!  The Architecture Is VAX.
+$!  The Architecture Is AXP.
 $!
-$   ARCH = "VAX"
+$   ARCH := AXP
 $!
 $! Else...
 $!
 $ ELSE
 $!
-$!  The Architecture Is Alpha, IA64 or whatever comes in the future.
+$!  The Architecture Is VAX.
 $!
-$   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$   IF (ARCH .EQS. "") THEN ARCH = "UNK"
+$   ARCH := VAX
 $!
 $! End The Architecture Check.
 $!
 $ ENDIF
 $!
-$ ARCHD = ARCH
-$ LIB32 = "32"
-$ OPT_FILE = ""
-$ POINTER_SIZE = ""
-$!
 $! Define what programs should be compiled
 $!
 $ PROGRAMS := OPENSSL
+$!$ PROGRAMS := VERIFY,ASN1PARS,REQ,DGST,DH,ENC,PASSWD,GENDH,ERRSTR,CA,CRL,-
+$!	      RSA,DSA,DSAPARAM,-
+$!	      X509,GENRSA,GENDSA,S_SERVER,S_CLIENT,SPEED,-
+$!	      S_TIME,VERSION,PKCS7,CRL2P7,SESS_ID,CIPHERS,NSEQ,
 $!
 $! Check To Make Sure We Have Valid Command Line Parameters.
 $!
 $ GOSUB CHECK_OPTIONS
 $!
-$! Define The CRYPTO Library.
-$!
-$ CRYPTO_LIB := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO'LIB32'.OLB
-$!
-$! Define The SSL Library.
-$!
-$ SSL_LIB := SYS$DISK:[-.'ARCHD'.EXE.SSL]SSL_LIBSSL'LIB32'.OLB
-$!
-$! Define The OBJ and EXE Directories.
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.APPS]
-$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.APPS]
-$!
-$! Specify the destination directory in any /MAP option.
-$!
-$ if (LINKMAP .eqs. "MAP")
-$ then
-$   LINKMAP = LINKMAP+ "=''EXE_DIR'"
-$ endif
-$!
-$! Add the location prefix to the linker options file name.
-$!
-$ if (OPT_FILE .nes. "")
-$ then
-$   OPT_FILE = EXE_DIR+ OPT_FILE
-$ endif
-$!
 $! Initialise logical names and such
 $!
 $ GOSUB INITIALISE
 $!
 $! Tell The User What Kind of Machine We Run On.
 $!
-$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'"
+$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
+$!
+$! Define The CRYPTO Library.
+$!
+$ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
+$!
+$! Define The SSL Library.
+$!
+$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB
+$!
+$! Define The OBJ Directory.
+$!
+$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.APPS]
 $!
 $! Check To See If The OBJ Directory Exists.
 $!
@@ -152,6 +110,10 @@ $! End The OBJ Directory Check.
 $!
 $ ENDIF
 $!
+$! Define The EXE Directory.
+$!
+$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS]
+$!
 $! Check To See If The EXE Directory Exists.
 $!
 $ IF (F$PARSE(EXE_DIR).EQS."")
@@ -174,23 +136,33 @@ $!
 $ GOSUB CHECK_OPT_FILE
 $!
 $! Define The Application Files.
-$! NOTE: Some might think this list ugly.  However, it's made this way to
-$! reflect the E_OBJ variable in Makefile as closely as possible, thereby
-$! making it fairly easy to verify that the lists are the same.
-$!
-$ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+-
-	     	"CA,PKCS7,CRL2P7,CRL,"+-
-	      	"RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+-
-	      	"X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+-
-	      	"S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+-
-	      	"CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ -
-	      	"SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS,SRP"
-$!
-$ LIB_OPENSSL = LIB_OPENSSL+ ",VMS_DECC_INIT"
 $!
+$ LIB_FILES = "VERIFY;ASN1PARS;REQ;DGST;DH;DHPARAM;ENC;PASSWD;GENDH;ERRSTR;"+-
+	      "CA;PKCS7;CRL2P7;CRL;"+-
+	      "RSA;RSAUTL;DSA;DSAPARAM;EC;ECPARAM;"+-
+	      "X509;GENRSA;GENDSA;S_SERVER;S_CLIENT;SPEED;"+-
+	      "S_TIME;APPS;S_CB;S_SOCKET;APP_RAND;VERSION;SESS_ID;"+-
+	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP"
+$ APP_FILES := OPENSSL,'OBJ_DIR'VERIFY.OBJ,ASN1PARS.OBJ,REQ.OBJ,DGST.OBJ,DH.OBJ,DHPARAM.OBJ,ENC.OBJ,PASSWD.OBJ,GENDH.OBJ,ERRSTR.OBJ,-
+	       CA.OBJ,PKCS7.OBJ,CRL2P7.OBJ,CRL.OBJ,-
+	       RSA.OBJ,RSAUTL.OBJ,DSA.OBJ,DSAPARAM.OBJ,EC.OBJ,ECPARAM.OBJ,-
+	       X509.OBJ,GENRSA.OBJ,GENDSA.OBJ,S_SERVER.OBJ,S_CLIENT.OBJ,SPEED.OBJ,-
+	       S_TIME.OBJ,APPS.OBJ,S_CB.OBJ,S_SOCKET.OBJ,APP_RAND.OBJ,VERSION.OBJ,SESS_ID.OBJ,-
+	       CIPHERS.OBJ,NSEQ.OBJ,PKCS12.OBJ,PKCS8.OBJ,SPKAC.OBJ,SMIME.OBJ,RAND.OBJ,ENGINE.OBJ,OCSP.OBJ
 $ TCPIP_PROGRAMS = ",,"
 $ IF COMPILER .EQS. "VAXC" THEN -
      TCPIP_PROGRAMS = ",OPENSSL,"
+$!$ APP_FILES := VERIFY;ASN1PARS;REQ;DGST;DH;ENC;GENDH;ERRSTR;CA;-
+$!	       PKCS7;CRL2P7;CRL;-
+$!	       RSA;DSA;DSAPARAM;-
+$!	       X509;GENRSA;GENDSA;-
+$!	       S_SERVER,'OBJ_DIR'S_SOCKET.OBJ,'OBJ_DIR'S_CB.OBJ;-
+$!	       S_CLIENT,'OBJ_DIR'S_SOCKET.OBJ,'OBJ_DIR'S_CB.OBJ;-
+$!	       SPEED;-
+$!	       S_TIME,'OBJ_DIR'S_CB.OBJ;VERSION;SESS_ID;CIPHERS;NSEQ
+$!$ TCPIP_PROGRAMS = ",,"
+$!$ IF COMPILER .EQS. "VAXC" THEN -
+$!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
@@ -200,158 +172,146 @@ $ PHASE := LIB
 $!
 $ RESTART: 
 $!
-$!  Define An App Counter And Set It To "0".
+$!  Define A File Counter And Set It To "0".
 $!
-$ APP_COUNTER = 0
+$ FILE_COUNTER = 0
 $!
-$!  Top Of The App Loop.
+$! Top Of The File Loop.
 $!
-$ NEXT_APP:
+$ NEXT_FILE:
 $!
-$!  Make The Application File Name
+$! O.K, Extract The File Name From The File List.
 $!
-$ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM")
+$ FILE_NAME0 = F$EDIT(F$ELEMENT(FILE_COUNTER,";",'PHASE'_FILES),"TRIM")
+$ FILE_NAME = F$EDIT(F$ELEMENT(0,",",FILE_NAME0),"TRIM")
+$ EXTRA_OBJ = FILE_NAME0 - FILE_NAME
 $!
-$!  Create The Executable File Name.
+$! Check To See If We Are At The End Of The File List.
 $!
-$   EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE"
-$!
-$!  Check To See If We Are At The End Of The File List.
-$!
-$ IF (CURRENT_APP.EQS.",")
+$ IF (FILE_NAME0.EQS.";")
 $ THEN
 $   IF (PHASE.EQS."LIB")
 $   THEN
 $     PHASE := APP
 $     GOTO RESTART
 $   ELSE
-$     GOTO APP_DONE
+$     GOTO FILE_DONE
 $   ENDIF
 $ ENDIF
 $!
-$!  Increment The Counter.
+$! Increment The Counter.
 $!
-$ APP_COUNTER = APP_COUNTER + 1
+$ FILE_COUNTER = FILE_COUNTER + 1
 $!
-$!  Decide if we're building the object files or not.
+$! Check to see if this program should actually be compiled
+$!
+$ IF PHASE .EQS. "APP" .AND. -
+     ","+PROGRAMS+"," - (","+F$EDIT(FILE_NAME,"UPCASE")+",") .EQS. ","+PROGRAMS+","
+$ THEN
+$   GOTO NEXT_FILE
+$ ENDIF
+$!
+$! Create The Source File Name.
+$!
+$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C"
+$!
+$! Create The Object File Name.
+$!
+$ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
+$!
+$! Create The Executable File Name.
+$!
+$ EXE_FILE = EXE_DIR + FILE_NAME + ".EXE"
+$ ON WARNING THEN GOTO NEXT_FILE
+$!
+$! Check To See If The File We Want To Compile Actually Exists.
+$!
+$ IF (F$SEARCH(SOURCE_FILE).EQS."")
+$ THEN
+$!
+$!  Tell The User That The File Dosen't Exist.
+$!
+$   WRITE SYS$OUTPUT ""
+$   WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
+$   WRITE SYS$OUTPUT ""
+$!
+$!  Exit The Build.
+$!
+$   GOTO EXIT
+$!
+$! End The File Exist Check.
+$!
+$ ENDIF
+$!
+$! Tell The User What We Are Building.
 $!
 $ IF (PHASE.EQS."LIB")
 $ THEN
+$   WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File."
+$ ELSE
+$   WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program."
+$ ENDIF
 $!
-$!  Define A Library File Counter And Set It To "-1".
-$!  -1 Means The Application File Name Is To Be Used.
+$! Compile The File.
 $!
-$   LIB_COUNTER = -1
+$ ON ERROR THEN GOTO NEXT_FILE
+$ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2
+$ THEN
+$   CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ELSE
+$   CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ENDIF
 $!
-$!  Create a .OPT file for the object files
+$ ON WARNING THEN GOTO NEXT_FILE
 $!
-$   OPEN /WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
-$!
-$!  Top Of The File Loop.
-$!
-$  NEXT_LIB:
-$!
-$!  O.K, Extract The File Name From The File List.
-$!
-$   IF LIB_COUNTER .GE. 0
-$   THEN
-$     FILE_NAME = F$EDIT(F$ELEMENT(LIB_COUNTER,",",LIB_'CURRENT_APP'),"TRIM")
-$   ELSE
-$     FILE_NAME = CURRENT_APP
-$   ENDIF
-$!
-$!  Check To See If We Are At The End Of The File List.
-$!
-$   IF (FILE_NAME.EQS.",")
-$   THEN
-$     CLOSE OBJECTS
-$     GOTO NEXT_APP
-$   ENDIF
-$!
-$!  Increment The Counter.
-$!
-$   LIB_COUNTER = LIB_COUNTER + 1
-$!
-$!  Create The Source File Name.
-$!
-$   SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C"
-$!
-$!  Create The Object File Name.
-$!
-$   OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
-$   ON WARNING THEN GOTO NEXT_LIB
-$!
-$!  Check To See If The File We Want To Compile Actually Exists.
-$!
-$   IF (F$SEARCH(SOURCE_FILE).EQS."")
-$   THEN
-$!
-$!    Tell The User That The File Dosen't Exist.
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Exit The Build.
-$!
-$     GOTO EXIT
-$!
-$!  End The File Exist Check.
-$!
-$   ENDIF
-$!
-$!  Tell The User What We Are Building.
-$!
-$   IF (PHASE.EQS."LIB")
-$   THEN
-$     WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File."
-$   ELSE
-$     WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program."
-$   ENDIF
-$!
-$!  Compile The File.
-$!
-$   ON ERROR THEN GOTO NEXT_LIB
-$   IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2
-$   THEN
-$     CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$   ELSE
-$     CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$   ENDIF
-$   WRITE OBJECTS OBJECT_FILE
-$!
-$   GOTO NEXT_LIB
+$ IF (PHASE.EQS."LIB") 
+$ THEN 
+$   GOTO NEXT_FILE
 $ ENDIF
 $!
 $!  Check if this program works well without a TCPIP library
 $!
-$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - CURRENT_APP .NES. TCPIP_PROGRAMS
+$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - FILE_NAME .NES. TCPIP_PROGRAMS
 $ THEN
-$   WRITE SYS$OUTPUT CURRENT_APP," needs a TCP/IP library.  Can't link.  Skipping..."
-$   GOTO NEXT_APP
+$   WRITE SYS$OUTPUT FILE_NAME," needs a TCP/IP library.  Can't link.  Skipping..."
+$   GOTO NEXT_FILE
 $ ENDIF
 $!
 $! Link The Program.
+$! Check To See If We Are To Link With A Specific TCP/IP Library.
 $!
-$ ON WARNING THEN GOTO NEXT_APP
+$ IF (TCPIP_LIB.NES."")
+$ THEN
 $!
 $! Don't Link With The RSAREF Routines And TCP/IP Library.
 $!
-$ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' /EXE='EXE_FILE' -
-  'EXE_DIR''CURRENT_APP'.OPT /OPTIONS, -
-  'SSL_LIB' /LIBRARY, -
-  'CRYPTO_LIB' /LIBRARY -
-  'TCPIP_LIB' -
-  'ZLIB_LIB' -
-  ,'OPT_FILE' /OPTIONS
+$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	'OBJECT_FILE''EXTRA_OBJ', -
+        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
+        'TCPIP_LIB','OPT_FILE'/OPTION
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
+$!
+$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	'OBJECT_FILE''EXTRA_OBJ', -
+        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
+        'OPT_FILE'/OPTION
+$!
+$! End The TCP/IP Library Check.
+$!
+$ ENDIF
 $!
 $! Go Back And Do It Again.
 $!
-$ GOTO NEXT_APP
+$ GOTO NEXT_FILE
 $!
 $! All Done With This File.
 $!
-$ APP_DONE:
+$ FILE_DONE:
 $ EXIT:
 $!
 $! All Done, Time To Clean Up And Exit.
@@ -378,7 +338,7 @@ $!
 $     CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Against 
+! Default System Options File To Link Agianst 
 ! The Sharable VAX C Runtime Library.
 !
 SYS$SHARE:VAXCRTL.EXE/SHARE
@@ -407,7 +367,7 @@ $!
 $     CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Against 
+! Default System Options File To Link Agianst 
 ! The Sharable C Runtime Library.
 !
 GNU_CC:[000000]GCCLIB/LIBRARY
@@ -442,7 +402,7 @@ $!
 $       CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Against 
+! Default System Options File To Link Agianst 
 ! The Sharable DEC C Runtime Library.
 !
 SYS$SHARE:DECC$SHR.EXE/SHARE
@@ -452,19 +412,19 @@ $!    Else...
 $!
 $     ELSE
 $!
-$!      Create The non-VAX Linker Option File.
+$!      Create The AXP Linker Option File.
 $!
 $       CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File For non-VAX To Link Against 
+! Default System Options File For AXP To Link Agianst 
 ! The Sharable C Runtime Library.
 !
 SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
 SYS$SHARE:CMA$OPEN_RTL/SHARE
 $EOD
 $!
-$!    End The DEC C Option File Check.
+$!    End The VAX/AXP DEC C Option File Check.
 $!
 $     ENDIF
 $!
@@ -541,15 +501,14 @@ $!
 $ IF (P1.EQS."NODEBUG")
 $ THEN
 $!
-$!  P1 Is NODEBUG, So Compile Without Debugger Information.
+$!   P1 Is NODEBUG, So Compile Without Debugger Information.
 $!
-$   DEBUGGER  = "NODEBUG"
-$   LINKMAP = "NOMAP"
-$   TRACEBACK = "NOTRACEBACK" 
-$   GCC_OPTIMIZE = "OPTIMIZE"
-$   CC_OPTIMIZE = "OPTIMIZE"
-$   WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$   WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
+$    DEBUGGER  = "NODEBUG"
+$    TRACEBACK = "NOTRACEBACK" 
+$    GCC_OPTIMIZE = "OPTIMIZE"
+$    CC_OPTIMIZE = "OPTIMIZE"
+$    WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
+$    WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
 $!
 $! Else...
 $!
@@ -563,7 +522,6 @@ $!
 $!    Compile With Debugger Information.
 $!
 $     DEBUGGER  = "DEBUG"
-$     LINKMAP = "MAP"
 $     TRACEBACK = "TRACEBACK"
 $     GCC_OPTIMIZE = "NOOPTIMIZE"
 $     CC_OPTIMIZE = "NOOPTIMIZE"
@@ -571,7 +529,7 @@ $     WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
 $     WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
 $   ELSE
 $!
-$!    Tell The User Entered An Invalid Option.
+$!    Tell The User Entered An Invalid Option..
 $!
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
@@ -584,7 +542,7 @@ $!    Time To EXIT.
 $!
 $     EXIT
 $!
-$!  End The Valid Argument Check.
+$!  End The Valid Arguement Check.
 $!
 $   ENDIF
 $!
@@ -592,87 +550,6 @@ $! End The P1 Check.
 $!
 $ ENDIF
 $!
-$! Check P6 (POINTER_SIZE).
-$!
-$ IF (P6 .NES. "") .AND. (ARCH .NES. "VAX")
-$ THEN
-$!
-$   IF (P6 .EQS. "32")
-$   THEN
-$     POINTER_SIZE = " /POINTER_SIZE=32"
-$   ELSE
-$     POINTER_SIZE = F$EDIT( P6, "COLLAPSE, UPCASE")
-$     IF ((POINTER_SIZE .EQS. "64") .OR. -
-       (POINTER_SIZE .EQS. "64=") .OR. -
-       (POINTER_SIZE .EQS. "64=ARGV"))
-$     THEN
-$       ARCHD = ARCH+ "_64"
-$       LIB32 = ""
-$       IF (F$EXTRACT( 2, 1, POINTER_SIZE) .EQS. "=")
-$       THEN
-$!        Explicit user choice: "64" or "64=ARGV".
-$         IF (POINTER_SIZE .EQS. "64=") THEN POINTER_SIZE = "64"
-$       ELSE
-$         SET NOON
-$         DEFINE /USER_MODE SYS$OUTPUT NL:
-$         DEFINE /USER_MODE SYS$ERROR NL:
-$         CC /NOLIST /NOOBJECT /POINTER_SIZE=64=ARGV NL:
-$         IF ($STATUS .AND. %X0FFF0000) .EQ. %X00030000
-$         THEN
-$           ! If we got here, it means DCL complained like this:
-$           ! %DCL-W-NOVALU, value not allowed - remove value specification
-$           !  \64=\
-$           !
-$           ! If the compiler was run, logicals defined in /USER would
-$           ! have been deassigned automatically.  However, when DCL
-$           ! complains, they aren't, so we do it here (it might be
-$           ! unnecessary, but just in case there will be another error
-$           ! message further on that we don't want to miss)
-$           DEASSIGN /USER_MODE SYS$ERROR
-$           DEASSIGN /USER_MODE SYS$OUTPUT
-$         ELSE
-$           POINTER_SIZE = POINTER_SIZE + "=ARGV"
-$         ENDIF
-$         SET ON
-$       ENDIF
-$       POINTER_SIZE = " /POINTER_SIZE=''POINTER_SIZE'"
-$!
-$     ELSE
-$!
-$!      Tell The User Entered An Invalid Option.
-$!
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT "The Option ", P6, -
-         " Is Invalid.  The Valid Options Are:"
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT -
-         "    """"  :  Compile with default (short) pointers."
-$       WRITE SYS$OUTPUT -
-         "    32  :  Compile with 32-bit (short) pointers."
-$       WRITE SYS$OUTPUT -
-         "    64       :  Compile with 64-bit (long) pointers (auto ARGV)."
-$       WRITE SYS$OUTPUT -
-         "    64=      :  Compile with 64-bit (long) pointers (no ARGV)."
-$       WRITE SYS$OUTPUT -
-         "    64=ARGV  :  Compile with 64-bit (long) pointers (ARGV)."
-$       WRITE SYS$OUTPUT ""
-$! 
-$!      Time To EXIT.
-$!
-$       EXIT
-$!
-$     ENDIF
-$!
-$   ENDIF
-$!
-$! End The P6 (POINTER_SIZE) Check.
-$!
-$ ENDIF
-$!
-$! Set basic C compiler /INCLUDE directories.
-$!
-$ CC_INCLUDES = "SYS$DISK:[-],SYS$DISK:[-.CRYPTO]"
-$!
 $! Check To See If P2 Is Blank.
 $!
 $ IF (P2.EQS."")
@@ -696,7 +573,7 @@ $   ELSE
 $!
 $!  Check To See If We Have VAXC Or DECC.
 $!
-$     IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
+$     IF (ARCH.EQS."AXP").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
 $     THEN 
 $!
 $!      Looks Like DECC, Set To Use DECC.
@@ -773,64 +650,11 @@ $ CCDEFS = "MONOLITH"
 $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
 $ CCEXTRAFLAGS = ""
 $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
+$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
 $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
 $!
-$! Check To See If We Have A ZLIB Option.
-$!
-$ ZLIB = P7
-$ IF (ZLIB .NES. "")
-$ THEN
-$!
-$!  Check for expected ZLIB files.
-$!
-$   err = 0
-$   file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
-$   if (f$search( file1) .eqs. "")
-$   then
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
-$     WRITE SYS$OUTPUT "    Can't find header: ''file1'"
-$     err = 1
-$   endif
-$   file1 = f$parse( "A.;", ZLIB)- "A.;"
-$!
-$   file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
-$   if (f$search( file2) .eqs. "")
-$   then
-$     if (err .eq. 0)
-$     then
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
-$     endif
-$     WRITE SYS$OUTPUT "    Can't find library: ''file2'"
-$     WRITE SYS$OUTPUT ""
-$     err = err+ 2
-$   endif
-$   if (err .eq. 1)
-$   then
-$     WRITE SYS$OUTPUT ""
-$   endif
-$!
-$   if (err .ne. 0)
-$   then
-$     EXIT
-$   endif
-$!
-$   CCDEFS = """ZLIB=1"", "+ CCDEFS
-$   CC_INCLUDES = CC_INCLUDES+ ", "+ file1
-$   ZLIB_LIB = ", ''file2' /library"
-$!
-$!  Print info
-$!
-$   WRITE SYS$OUTPUT "ZLIB library spec: ", file2
-$!
-$! End The ZLIB Check.
-$!
-$ ENDIF
-$!
-$!  Check To See If The User Entered A Valid Parameter.
+$!  Check To See If The User Entered A Valid Paramter.
 $!
 $ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC")
 $ THEN
@@ -853,13 +677,13 @@ $!
 $     CC = "CC"
 $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
-$     CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
-       "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + -
-       " /INCLUDE=(''CC_INCLUDES') " + CCEXTRAFLAGS
+$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
+           "/NOLIST/PREFIX=ALL" + -
+	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "VAX_DECC_OPTIONS.OPT"
+$     OPT_FILE = "SYS$DISK:[]VAX_DECC_OPTIONS.OPT"
 $!
 $!  End DECC Check.
 $!
@@ -880,14 +704,14 @@ $!
 $!    Compile Using VAXC.
 $!
 $     CC = "CC"
-$     IF ARCH.NES."VAX"
+$     IF ARCH.EQS."AXP"
 $     THEN
-$	WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!"
+$	WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
 $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
+	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
 $     CCDEFS = CCDEFS + ",""VAXC"""
 $!
 $!    Define <sys> As SYS$COMMON:[SYSLIB]
@@ -896,7 +720,7 @@ $     DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "VAX_VAXC_OPTIONS.OPT"
+$     OPT_FILE = "SYS$DISK:[]VAX_VAXC_OPTIONS.OPT"
 $!
 $!  End VAXC Check
 $!
@@ -919,11 +743,11 @@ $!    Use GNU C...
 $!
 $     IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC
 $     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
+	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "VAX_GNUC_OPTIONS.OPT"
+$     OPT_FILE = "SYS$DISK:[]VAX_GNUC_OPTIONS.OPT"
 $!
 $!  End The GNU C Check.
 $!
@@ -933,7 +757,7 @@ $!  Set up default defines
 $!
 $   CCDEFS = """FLAT_INC=1""," + CCDEFS
 $!
-$!  Else The User Entered An Invalid Argument.
+$!  Else The User Entered An Invalid Arguement.
 $!
 $ ELSE
 $!
@@ -965,7 +789,7 @@ $   THEN
 $!
 $!    Set the library to use SOCKETSHR
 $!
-$     TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
 $!
 $!    Done with SOCKETSHR
 $!
@@ -991,13 +815,13 @@ $   THEN
 $!
 $!    Set the library to use UCX.
 $!
-$     TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
 $     IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
 $     THEN
-$       TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS"
+$       TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
 $     ELSE
 $       IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
-	  TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS"
+	  TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
 $     ENDIF
 $!
 $!    Done with UCX
@@ -1011,7 +835,7 @@ $   THEN
 $!
 $!    Set the library to use TCPIP.
 $!
-$     TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
 $!
 $!    Done with TCPIP
 $!
@@ -1036,9 +860,9 @@ $   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'"
 $!
 $!  Print info
 $!
-$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- ","
+$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
 $!
-$!  Else The User Entered An Invalid Argument.
+$!  Else The User Entered An Invalid Arguement.
 $!
 $ ELSE
 $!
@@ -1066,13 +890,13 @@ $ IF COMPILER .EQS. "DECC"
 $ THEN
 $   IF CCDISABLEWARNINGS .NES. ""
 $   THEN
-$     CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
+$     CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
 $   ENDIF
 $ ELSE
 $   CCDISABLEWARNINGS = ""
 $ ENDIF
-$ CC2 = CC + " /DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS
-$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
+$ CC2 = CC + "/DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS
+$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
 $!
 $! Show user the result
 $!
@@ -1138,7 +962,7 @@ $ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
 $!
 $! Set up the logical name OPENSSL to point at the include directory
 $!
-$ DEFINE OPENSSL /NOLOG '__INCLUDE'
+$ DEFINE OPENSSL/NOLOG '__INCLUDE'
 $!
 $! Done
 $!
@@ -1146,24 +970,15 @@ $ RETURN
 $!
 $ CLEANUP:
 $!
-$! Restore the saved logical name OPENSSL, if it had a value.
+$! Restore the logical name OPENSSL if it had a value
 $!
-$ if (f$type( __SAVE_OPENSSL) .nes. "")
-$ then
-$   IF __SAVE_OPENSSL .EQS. ""
-$   THEN
-$     DEASSIGN OPENSSL
-$   ELSE
-$     DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL'
-$   ENDIF
-$ endif
-$!
-$! Close any open files.
-$!
-$ if (f$trnlnm( "objects", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
-   close objects
+$ IF __SAVE_OPENSSL .EQS. ""
+$ THEN
+$   DEASSIGN OPENSSL
+$ ELSE
+$   DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
+$ ENDIF
 $!
 $! Done
 $!
 $ RETURN
-$!

apps/nseq.c

@@ -1,5 +1,5 @@
 /* nseq.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
  * project 1999.
  */
 /* ====================================================================

apps/ocsp.c

@@ -1,5 +1,5 @@
 /* ocsp.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
  * project 2000.
  */
 /* ====================================================================
@@ -55,67 +55,48 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
-#ifndef OPENSSL_NO_OCSP
-
-#ifdef OPENSSL_SYS_VMS
-#define _XOPEN_SOURCE_EXTENDED	/* So fd_set and friends get properly defined
-				   on OpenVMS */
-#endif
-
-#define USE_SOCKETS
 
 #include <stdio.h>
-#include <stdlib.h>
 #include <string.h>
-#include <time.h>
-#include "apps.h" /* needs to be included before the openssl headers! */
-#include <openssl/e_os2.h>
-#include <openssl/crypto.h>
+#include "apps.h"
+#include <openssl/pem.h>
+#include <openssl/ocsp.h>
 #include <openssl/err.h>
 #include <openssl/ssl.h>
-#include <openssl/evp.h>
-#include <openssl/bn.h>
-#include <openssl/x509v3.h>
 
-#if defined(NETWARE_CLIB)
-#  ifdef NETWARE_BSDSOCK
-#    include <sys/socket.h>
-#    include <sys/bsdskt.h>
-#  else
-#    include <novsock2.h>
-#  endif
-#elif defined(NETWARE_LIBC)
-#  ifdef NETWARE_BSDSOCK
-#    include <sys/select.h>
-#  else
-#    include <novsock2.h>
-#  endif
-#endif
-  
 /* Maximum leeway in validity period: default 5 minutes */
 #define MAX_VALIDITY_PERIOD	(5 * 60)
 
-static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_md, X509 *issuer,
+/* CA index.txt definitions */
+#define DB_type         0
+#define DB_exp_date     1
+#define DB_rev_date     2
+#define DB_serial       3       /* index - unique */
+#define DB_file         4       
+#define DB_name         5       /* index - unique for active */
+#define DB_NUMBER       6
+
+#define DB_TYPE_REV	'R'
+#define DB_TYPE_EXP	'E'
+#define DB_TYPE_VAL	'V'
+
+static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
-static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, const EVP_MD * cert_id_md, X509 *issuer,
+static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
 static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
-			      STACK_OF(OPENSSL_STRING) *names,
-			      STACK_OF(OCSP_CERTID) *ids, long nsec,
-			      long maxage);
+				STACK *names, STACK_OF(OCSP_CERTID) *ids,
+				long nsec, long maxage);
 
-static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
+static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
 			int nmin, int ndays);
 
-static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser);
+static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser);
 static BIO *init_responder(char *port);
 static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port);
 static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp);
-static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
-				STACK_OF(CONF_VALUE) *headers,
-				OCSP_REQUEST *req, int req_timeout);
 
 #undef PROG
 #define PROG ocsp_main
@@ -133,7 +114,6 @@ int MAIN(int argc, char **argv)
 	char *rsignfile = NULL, *rkeyfile = NULL;
 	char *outfile = NULL;
 	int add_nonce = 1, noverify = 0, use_ssl = -1;
-	STACK_OF(CONF_VALUE) *headers = NULL;
 	OCSP_REQUEST *req = NULL;
 	OCSP_RESPONSE *resp = NULL;
 	OCSP_BASICRESP *bs = NULL;
@@ -143,11 +123,11 @@ int MAIN(int argc, char **argv)
 	BIO *acbio = NULL, *cbio = NULL;
 	BIO *derbio = NULL;
 	BIO *out = NULL;
-	int req_timeout = -1;
 	int req_text = 0, resp_text = 0;
 	long nsec = MAX_VALIDITY_PERIOD, maxage = -1;
 	char *CAfile = NULL, *CApath = NULL;
 	X509_STORE *store = NULL;
+	SSL_CTX *ctx = NULL;
 	STACK_OF(X509) *sign_other = NULL, *verify_other = NULL, *rother = NULL;
 	char *sign_certfile = NULL, *verify_certfile = NULL, *rcertfile = NULL;
 	unsigned long sign_flags = 0, verify_flags = 0, rflags = 0;
@@ -155,25 +135,22 @@ int MAIN(int argc, char **argv)
 	int accept_count = -1;
 	int badarg = 0;
 	int i;
-	int ignore_err = 0;
-	STACK_OF(OPENSSL_STRING) *reqnames = NULL;
+	STACK *reqnames = NULL;
 	STACK_OF(OCSP_CERTID) *ids = NULL;
 
 	X509 *rca_cert = NULL;
 	char *ridx_filename = NULL;
 	char *rca_filename = NULL;
-	CA_DB *rdb = NULL;
+	TXT_DB *rdb = NULL;
 	int nmin = 0, ndays = -1;
-	const EVP_MD *cert_id_md = NULL;
 
 	if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
 
 	if (!load_config(bio_err, NULL))
 		goto end;
 	SSL_load_error_strings();
-	OpenSSL_add_ssl_algorithms();
 	args = argv + 1;
-	reqnames = sk_OPENSSL_STRING_new_null();
+	reqnames = sk_new_null();
 	ids = sk_OCSP_CERTID_new_null();
 	while (!badarg && *args && *args[0] == '-')
 		{
@@ -186,22 +163,6 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
-		else if (!strcmp(*args, "-timeout"))
-			{
-			if (args[1])
-				{
-				args++;
-				req_timeout = atol(*args);
-				if (req_timeout < 0)
-					{
-					BIO_printf(bio_err,
-						"Illegal timeout value %s\n",
-						*args);
-					badarg = 1;
-					}
-				}
-			else badarg = 1;
-			}
 		else if (!strcmp(*args, "-url"))
 			{
 			if (args[1])
@@ -233,18 +194,6 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
-		else if (!strcmp(*args, "-header"))
-			{
-			if (args[1] && args[2])
-				{
-				if (!X509V3_add_value(args[1], args[2], &headers))
-					goto end;
-				args += 2;
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp(*args, "-ignore_err"))
-			ignore_err = 1;
 		else if (!strcmp(*args, "-noverify"))
 			noverify = 1;
 		else if (!strcmp(*args, "-nonce"))
@@ -442,10 +391,9 @@ int MAIN(int argc, char **argv)
 				cert = load_cert(bio_err, *args, FORMAT_PEM,
 					NULL, e, "certificate");
 				if(!cert) goto end;
-				if (!cert_id_md) cert_id_md = EVP_sha1();
-				if(!add_ocsp_cert(&req, cert, cert_id_md, issuer, ids))
+				if(!add_ocsp_cert(&req, cert, issuer, ids))
 					goto end;
-				if(!sk_OPENSSL_STRING_push(reqnames, *args))
+				if(!sk_push(reqnames, *args))
 					goto end;
 				}
 			else badarg = 1;
@@ -455,10 +403,9 @@ int MAIN(int argc, char **argv)
 			if (args[1])
 				{
 				args++;
-				if (!cert_id_md) cert_id_md = EVP_sha1();
-				if(!add_ocsp_serial(&req, *args, cert_id_md, issuer, ids))
+				if(!add_ocsp_serial(&req, *args, issuer, ids))
 					goto end;
-				if(!sk_OPENSSL_STRING_push(reqnames, *args))
+				if(!sk_push(reqnames, *args))
 					goto end;
 				}
 			else badarg = 1;
@@ -558,10 +505,7 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
-		else if ((cert_id_md = EVP_get_digestbyname((*args)+1))==NULL)
-			{
-			badarg = 1;
-			}
+		else badarg = 1;
 		args++;
 		}
 
@@ -579,7 +523,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-serial n          serial number to check\n");
 		BIO_printf (bio_err, "-signer file       certificate to sign OCSP request with\n");
 		BIO_printf (bio_err, "-signkey file      private key to sign OCSP request with\n");
-		BIO_printf (bio_err, "-sign_other file   additional certificates to include in signed request\n");
+		BIO_printf (bio_err, "-sign_certs file   additional certificates to include in signed request\n");
 		BIO_printf (bio_err, "-no_certs          don't include any certificates in signed request\n");
 		BIO_printf (bio_err, "-req_text          print text form of request\n");
 		BIO_printf (bio_err, "-resp_text         print text form of response\n");
@@ -599,10 +543,10 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-validity_period n maximum validity discrepancy in seconds\n");
 		BIO_printf (bio_err, "-status_age n      maximum status age in seconds\n");
 		BIO_printf (bio_err, "-noverify          don't verify response at all\n");
-		BIO_printf (bio_err, "-verify_other file additional certificates to search for signer\n");
+		BIO_printf (bio_err, "-verify_certs file additional certificates to search for signer\n");
 		BIO_printf (bio_err, "-trust_other       don't verify additional certificates\n");
 		BIO_printf (bio_err, "-no_intern         don't search certificates contained in response for signer\n");
-		BIO_printf (bio_err, "-no_signature_verify don't check signature on response\n");
+		BIO_printf (bio_err, "-no_sig_verify     don't check signature on response\n");
 		BIO_printf (bio_err, "-no_cert_verify    don't check signing certificate\n");
 		BIO_printf (bio_err, "-no_chain          don't chain verify response\n");
 		BIO_printf (bio_err, "-no_cert_checks    don't do additional checks on signing certificate\n");
@@ -617,7 +561,6 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-ndays n	 	 number of days before next update\n");
 		BIO_printf (bio_err, "-resp_key_id       identify reponse by signing certificate key ID\n");
 		BIO_printf (bio_err, "-nrequest n        number of requests to accept (default unlimited)\n");
-		BIO_printf (bio_err, "-<dgst alg>     use specified digest in the request");
 		goto end;
 		}
 
@@ -724,8 +667,7 @@ int MAIN(int argc, char **argv)
 			"signer private key");
 		if (!key)
 			goto end;
-
-		if (!OCSP_request_sign(req, signer, key, NULL, sign_other, sign_flags))
+		if (!OCSP_request_sign(req, signer, key, EVP_sha1(), sign_other, sign_flags))
 			{
 			BIO_printf(bio_err, "Error signing OCSP request\n");
 			goto end;
@@ -754,9 +696,22 @@ int MAIN(int argc, char **argv)
 
 	if (ridx_filename && !rdb)
 		{
-		rdb = load_index(ridx_filename, NULL);
-		if (!rdb) goto end;
-		if (!index_index(rdb)) goto end;
+		BIO *db_bio = NULL;
+		db_bio = BIO_new_file(ridx_filename, "r");
+		if (!db_bio)
+			{
+			BIO_printf(bio_err, "Error opening index file %s\n", ridx_filename);
+			goto end;
+			}
+		rdb = TXT_DB_read(db_bio, DB_NUMBER);
+		BIO_free(db_bio);
+		if (!rdb)
+			{
+			BIO_printf(bio_err, "Error reading index file %s\n", ridx_filename);
+			goto end;
+			}
+		if (!make_serial_index(rdb))
+			goto end;
 		}
 
 	if (rdb)
@@ -767,15 +722,34 @@ int MAIN(int argc, char **argv)
 		}
 	else if (host)
 		{
-#ifndef OPENSSL_NO_SOCK
-		resp = process_responder(bio_err, req, host, path,
-					port, use_ssl, headers, req_timeout);
-		if (!resp)
+		cbio = BIO_new_connect(host);
+		if (!cbio)
+			{
+			BIO_printf(bio_err, "Error creating connect BIO\n");
 			goto end;
-#else
-		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
-		goto end;
-#endif
+			}
+		if (port) BIO_set_conn_port(cbio, port);
+		if (use_ssl == 1)
+			{
+			BIO *sbio;
+			ctx = SSL_CTX_new(SSLv23_client_method());
+			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
+			sbio = BIO_new_ssl(ctx, 1);
+			cbio = BIO_push(sbio, cbio);
+			}
+		if (BIO_do_connect(cbio) <= 0)
+			{
+			BIO_printf(bio_err, "Error connecting BIO\n");
+			goto end;
+			}
+		resp = OCSP_sendreq_bio(cbio, path, req);
+		BIO_free_all(cbio);
+		cbio = NULL;
+		if (!resp)
+			{
+			BIO_printf(bio_err, "Error querying OCSP responsder\n");
+			goto end;
+			}
 		}
 	else if (respin)
 		{
@@ -818,10 +792,8 @@ int MAIN(int argc, char **argv)
 
 	if (i != OCSP_RESPONSE_STATUS_SUCCESSFUL)
 		{
-		BIO_printf(out, "Responder Error: %s (%d)\n",
+		BIO_printf(out, "Responder Error: %s (%ld)\n",
 				OCSP_response_status_str(i), i);
-		if (ignore_err)
-			goto redo_accept;
 		ret = 0;
 		goto end;
 		}
@@ -884,7 +856,7 @@ int MAIN(int argc, char **argv)
 
 		if(i <= 0)
 			{
-			BIO_printf(bio_err, "Response Verify Failure\n");
+			BIO_printf(bio_err, "Response Verify Failure\n", i);
 			ERR_print_errors(bio_err);
 			}
 		else
@@ -907,30 +879,30 @@ end:
 	X509_free(cert);
 	X509_free(rsigner);
 	X509_free(rca_cert);
-	free_index(rdb);
+	TXT_DB_free(rdb);
 	BIO_free_all(cbio);
 	BIO_free_all(acbio);
 	BIO_free(out);
 	OCSP_REQUEST_free(req);
 	OCSP_RESPONSE_free(resp);
 	OCSP_BASICRESP_free(bs);
-	sk_OPENSSL_STRING_free(reqnames);
+	sk_free(reqnames);
 	sk_OCSP_CERTID_free(ids);
 	sk_X509_pop_free(sign_other, X509_free);
 	sk_X509_pop_free(verify_other, X509_free);
-	sk_CONF_VALUE_pop_free(headers, X509V3_conf_free);
 
 	if (use_ssl != -1)
 		{
 		OPENSSL_free(host);
 		OPENSSL_free(port);
 		OPENSSL_free(path);
+		SSL_CTX_free(ctx);
 		}
 
 	OPENSSL_EXIT(ret);
 }
 
-static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_md,X509 *issuer,
+static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids)
 	{
 	OCSP_CERTID *id;
@@ -941,7 +913,7 @@ static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_m
 		}
 	if(!*req) *req = OCSP_REQUEST_new();
 	if(!*req) goto err;
-	id = OCSP_cert_to_id(cert_id_md, cert, issuer);
+	id = OCSP_cert_to_id(NULL, cert, issuer);
 	if(!id || !sk_OCSP_CERTID_push(ids, id)) goto err;
 	if(!OCSP_request_add0_id(*req, id)) goto err;
 	return 1;
@@ -951,7 +923,7 @@ static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_m
 	return 0;
 	}
 
-static int add_ocsp_serial(OCSP_REQUEST **req, char *serial,const EVP_MD *cert_id_md, X509 *issuer,
+static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids)
 	{
 	OCSP_CERTID *id;
@@ -973,7 +945,7 @@ static int add_ocsp_serial(OCSP_REQUEST **req, char *serial,const EVP_MD *cert_i
 		BIO_printf(bio_err, "Error converting serial number %s\n", serial);
 		return 0;
 		}
-	id = OCSP_cert_id_new(cert_id_md, iname, ikey, sno);
+	id = OCSP_cert_id_new(EVP_sha1(), iname, ikey, sno);
 	ASN1_INTEGER_free(sno);
 	if(!id || !sk_OCSP_CERTID_push(ids, id)) goto err;
 	if(!OCSP_request_add0_id(*req, id)) goto err;
@@ -985,9 +957,8 @@ static int add_ocsp_serial(OCSP_REQUEST **req, char *serial,const EVP_MD *cert_i
 	}
 
 static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
-			      STACK_OF(OPENSSL_STRING) *names,
-			      STACK_OF(OCSP_CERTID) *ids, long nsec,
-			      long maxage)
+					STACK *names, STACK_OF(OCSP_CERTID) *ids,
+					long nsec, long maxage)
 	{
 	OCSP_CERTID *id;
 	char *name;
@@ -997,13 +968,13 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 
 	ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd;
 
-	if (!bs || !req || !sk_OPENSSL_STRING_num(names) || !sk_OCSP_CERTID_num(ids))
+	if (!bs || !req || !sk_num(names) || !sk_OCSP_CERTID_num(ids))
 		return 1;
 
 	for (i = 0; i < sk_OCSP_CERTID_num(ids); i++)
 		{
 		id = sk_OCSP_CERTID_value(ids, i);
-		name = sk_OPENSSL_STRING_value(names, i);
+		name = sk_value(names, i);
 		BIO_printf(out, "%s: ", name);
 
 		if(!OCSP_resp_find_status(bs, id, &status, &reason,
@@ -1050,7 +1021,7 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 	}
 
 
-static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
+static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
 			int nmin, int ndays)
@@ -1060,6 +1031,7 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 	OCSP_BASICRESP *bs = NULL;
 	int i, id_count, ret = 1;
 
+
 	id_count = OCSP_request_onereq_count(req);
 
 	if (id_count <= 0)
@@ -1068,6 +1040,7 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 		goto end;
 		}
 
+	ca_id = OCSP_cert_to_id(EVP_sha1(), NULL, ca);
 
 	bs = OCSP_BASICRESP_new();
 	thisupd = X509_gmtime_adj(NULL, 0);
@@ -1080,23 +1053,8 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 		OCSP_ONEREQ *one;
 		ASN1_INTEGER *serial;
 		char **inf;
-		ASN1_OBJECT *cert_id_md_oid;
-		const EVP_MD *cert_id_md;
 		one = OCSP_request_onereq_get0(req, i);
 		cid = OCSP_onereq_get0_id(one);
-
-		OCSP_id_get0_info(NULL,&cert_id_md_oid, NULL,NULL, cid);
-
-		cert_id_md = EVP_get_digestbyobj(cert_id_md_oid);	
-		if (! cert_id_md) 
-			{
-			*resp = OCSP_response_create(OCSP_RESPONSE_STATUS_INTERNALERROR,
-				NULL);
-				goto end;
-			}	
-		if (ca_id) OCSP_CERTID_free(ca_id);
-		ca_id = OCSP_cert_to_id(cert_id_md, NULL, ca);
-
 		/* Is this request about our CA? */
 		if (OCSP_id_issuer_cmp(ca_id, cid))
 			{
@@ -1141,8 +1099,8 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 		}
 
 	OCSP_copy_nonce(bs, req);
-	
-	OCSP_basic_sign(bs, rcert, rkey, NULL, rother, flags);
+		
+	OCSP_basic_sign(bs, rcert, rkey, EVP_sha1(), rother, flags);
 
 	*resp = OCSP_response_create(OCSP_RESPONSE_STATUS_SUCCESSFUL, bs);
 
@@ -1155,21 +1113,20 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 
 	}
 
-static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser)
+static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser)
 	{
 	int i;
 	BIGNUM *bn = NULL;
 	char *itmp, *row[DB_NUMBER],**rrow;
 	for (i = 0; i < DB_NUMBER; i++) row[i] = NULL;
 	bn = ASN1_INTEGER_to_BN(ser,NULL);
-	OPENSSL_assert(bn); /* FIXME: should report an error at this point and abort */
 	if (BN_is_zero(bn))
 		itmp = BUF_strdup("00");
 	else
 		itmp = BN_bn2hex(bn);
 	row[DB_serial] = itmp;
 	BN_free(bn);
-	rrow=TXT_DB_get_by_index(db->db,DB_serial,row);
+	rrow=TXT_DB_get_by_index(db,DB_serial,row);
 	OPENSSL_free(itmp);
 	return rrow;
 	}
@@ -1182,11 +1139,7 @@ static BIO *init_responder(char *port)
 	bufbio = BIO_new(BIO_f_buffer());
 	if (!bufbio) 
 		goto err;
-#ifndef OPENSSL_NO_SOCK
 	acbio = BIO_new_accept(port);
-#else
-	BIO_printf(bio_err, "Error setting up accept BIO - sockets not supported.\n");
-#endif
 	if (!acbio)
 		goto err;
 	BIO_set_accept_bios(acbio, bufbio);
@@ -1269,153 +1222,7 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 		return 0;
 	BIO_printf(cbio, http_resp, i2d_OCSP_RESPONSE(resp, NULL));
 	i2d_OCSP_RESPONSE_bio(cbio, resp);
-	(void)BIO_flush(cbio);
+	BIO_flush(cbio);
 	return 1;
 	}
 
-static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
-				STACK_OF(CONF_VALUE) *headers,
-				OCSP_REQUEST *req, int req_timeout)
-	{
-	int fd;
-	int rv;
-	int i;
-	OCSP_REQ_CTX *ctx = NULL;
-	OCSP_RESPONSE *rsp = NULL;
-	fd_set confds;
-	struct timeval tv;
-
-	if (req_timeout != -1)
-		BIO_set_nbio(cbio, 1);
-
-	rv = BIO_do_connect(cbio);
-
-	if ((rv <= 0) && ((req_timeout == -1) || !BIO_should_retry(cbio)))
-		{
-		BIO_puts(err, "Error connecting BIO\n");
-		return NULL;
-		}
-
-	if (BIO_get_fd(cbio, &fd) <= 0)
-		{
-		BIO_puts(err, "Can't get connection fd\n");
-		goto err;
-		}
-
-	if (req_timeout != -1 && rv <= 0)
-		{
-		FD_ZERO(&confds);
-		openssl_fdset(fd, &confds);
-		tv.tv_usec = 0;
-		tv.tv_sec = req_timeout;
-		rv = select(fd + 1, NULL, (void *)&confds, NULL, &tv);
-		if (rv == 0)
-			{
-			BIO_puts(err, "Timeout on connect\n");
-			return NULL;
-			}
-		}
-
-
-	ctx = OCSP_sendreq_new(cbio, path, NULL, -1);
-	if (!ctx)
-		return NULL;
-
-	for (i = 0; i < sk_CONF_VALUE_num(headers); i++)
-		{
-		CONF_VALUE *hdr = sk_CONF_VALUE_value(headers, i);
-		if (!OCSP_REQ_CTX_add1_header(ctx, hdr->name, hdr->value))
-			goto err;
-		}
-
-	if (!OCSP_REQ_CTX_set1_req(ctx, req))
-		goto err;
-	
-	for (;;)
-		{
-		rv = OCSP_sendreq_nbio(&rsp, ctx);
-		if (rv != -1)
-			break;
-		if (req_timeout == -1)
-			continue;
-		FD_ZERO(&confds);
-		openssl_fdset(fd, &confds);
-		tv.tv_usec = 0;
-		tv.tv_sec = req_timeout;
-		if (BIO_should_read(cbio))
-			rv = select(fd + 1, (void *)&confds, NULL, NULL, &tv);
-		else if (BIO_should_write(cbio))
-			rv = select(fd + 1, NULL, (void *)&confds, NULL, &tv);
-		else
-			{
-			BIO_puts(err, "Unexpected retry condition\n");
-			goto err;
-			}
-		if (rv == 0)
-			{
-			BIO_puts(err, "Timeout on request\n");
-			break;
-			}
-		if (rv == -1)
-			{
-			BIO_puts(err, "Select error\n");
-			break;
-			}
-
-		}
-	err:
-	if (ctx)
-		OCSP_REQ_CTX_free(ctx);
-
-	return rsp;
-	}
-
-OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
-			char *host, char *path, char *port, int use_ssl,
-			STACK_OF(CONF_VALUE) *headers,
-			int req_timeout)
-	{
-	BIO *cbio = NULL;
-	SSL_CTX *ctx = NULL;
-	OCSP_RESPONSE *resp = NULL;
-	cbio = BIO_new_connect(host);
-	if (!cbio)
-		{
-		BIO_printf(err, "Error creating connect BIO\n");
-		goto end;
-		}
-	if (port) BIO_set_conn_port(cbio, port);
-	if (use_ssl == 1)
-		{
-		BIO *sbio;
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
-		ctx = SSL_CTX_new(SSLv23_client_method());
-#elif !defined(OPENSSL_NO_SSL3)
-		ctx = SSL_CTX_new(SSLv3_client_method());
-#elif !defined(OPENSSL_NO_SSL2)
-		ctx = SSL_CTX_new(SSLv2_client_method());
-#else
-		BIO_printf(err, "SSL is disabled\n");
-			goto end;
-#endif
-		if (ctx == NULL)
-			{
-			BIO_printf(err, "Error creating SSL context.\n");
-			goto end;
-			}
-		SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
-		sbio = BIO_new_ssl(ctx, 1);
-		cbio = BIO_push(sbio, cbio);
-		}
-	resp = query_responder(err, cbio, path, headers, req, req_timeout);
-	if (!resp)
-		BIO_printf(bio_err, "Error querying OCSP responsder\n");
-	end:
-	if (cbio)
-		BIO_free_all(cbio);
-	if (ctx)
-		SSL_CTX_free(ctx);
-	return resp;
-	}
-
-#endif

apps/openssl-vms.cnf

@@ -3,13 +3,8 @@
 # This is mostly being used for generation of certificate requests.
 #
 
-# This definition stops the following lines choking if HOME isn't
-# defined.
-HOME			= .
 RANDFILE		= $ENV::HOME/.rnd
-
-# Extra OBJECT IDENTIFIER info:
-#oid_file		= $ENV::HOME/.oid
+oid_file		= $ENV::HOME/.oid
 oid_section		= new_oids
 
 # To use this configuration file with the "-extfile" option of the
@@ -21,17 +16,12 @@ oid_section		= new_oids
 
 [ new_oids ]
 
-# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
+# We can add new OIDs in here for use by 'ca' and 'req'.
 # Add a simple OID like this:
 # testoid1=1.2.3.4
 # Or use config file substitution like this:
 # testoid2=${testoid1}.5.6
 
-# Policies used by the TSA examples.
-tsa_policy1 = 1.2.3.4.1
-tsa_policy2 = 1.2.3.4.5.6
-tsa_policy3 = 1.2.3.4.5.7
-
 ####################################################################
 [ ca ]
 default_ca	= CA_default		# The default ca section
@@ -39,40 +29,27 @@ default_ca	= CA_default		# The default ca section
 ####################################################################
 [ CA_default ]
 
-dir		= sys\$disk:[.demoCA		# Where everything is kept
+dir		= sys\$disk:[.demoCA	# Where everything is kept
 certs		= $dir.certs]		# Where the issued certs are kept
 crl_dir		= $dir.crl]		# Where the issued crl are kept
 database	= $dir]index.txt	# database index file.
-#unique_subject	= no			# Set to 'no' to allow creation of
-					# several ctificates with same subject.
-new_certs_dir	= $dir.newcerts]		# default place for new certs.
+new_certs_dir	= $dir.newcerts]	# default place for new certs.
 
 certificate	= $dir]cacert.pem 	# The CA certificate
-serial		= $dir]serial. 		# The current serial number
-crlnumber	= $dir]crlnumber.	# the current crl number
-					# must be commented out to leave a V1 CRL
+serial		= $dir]serial.		# The current serial number
 crl		= $dir]crl.pem 		# The current CRL
 private_key	= $dir.private]cakey.pem# The private key
 RANDFILE	= $dir.private].rand	# private random number file
 
 x509_extensions	= usr_cert		# The extentions to add to the cert
 
-# Comment out the following two lines for the "traditional"
-# (and highly broken) format.
-name_opt 	= ca_default		# Subject Name options
-cert_opt 	= ca_default		# Certificate field options
-
-# Extension copying option: use with caution.
-# copy_extensions = copy
-
 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
-# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= default		# use public key default MD
+default_md	= md5			# which md to use.
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -109,18 +86,16 @@ distinguished_name	= req_distinguished_name
 attributes		= req_attributes
 x509_extensions	= v3_ca	# The extentions to add to the self signed cert
 
-# Passwords for private keys if not present they will be prompted for
-# input_password = secret
-# output_password = secret
-
-# This sets a mask for permitted string types. There are several options. 
+# This sets the permitted types in a DirectoryString. There are several
+# options. 
 # default: PrintableString, T61String, BMPString.
-# pkix	 : PrintableString, BMPString (PKIX recommendation before 2004)
-# utf8only: only UTF8Strings (PKIX recommendation after 2004).
-# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
+# pkix	 : PrintableString, BMPString.
+# utf8only: only UTF8Strings.
+# nobmp : PrintableString, T61String (no BMPStrings).
 # MASK:XXXX a literal mask value.
-# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
-string_mask = utf8only
+# WARNING: current versions of Netscape crash on BMPStrings or UTF8Strings
+# so use this option with caution!
+dirstring_type = nobmp
 
 # req_extensions = v3_req # The extensions to add to a certificate request
 
@@ -149,7 +124,7 @@ commonName			= Common Name (eg, YOUR name)
 commonName_max			= 64
 
 emailAddress			= Email Address
-emailAddress_max		= 64
+emailAddress_max		= 40
 
 # SET-ex3			= SET extension number 3
 
@@ -192,14 +167,11 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer
+authorityKeyIdentifier=keyid,issuer:always
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
 # subjectAltName=email:copy
-# An alternative to produce certificates that aren't
-# deprecated according to PKIX.
-# subjectAltName=email:move
 
 # Copy subject details
 # issuerAltName=issuer:copy
@@ -211,9 +183,6 @@ authorityKeyIdentifier=keyid,issuer
 #nsCaPolicyUrl
 #nsSslServerName
 
-# This is required for TSA certificates.
-# extendedKeyUsage = critical,timeStamping
-
 [ v3_req ]
 
 # Extensions to add to a certificate request
@@ -231,7 +200,7 @@ keyUsage = nonRepudiation, digitalSignature, keyEncipherment
 
 subjectKeyIdentifier=hash
 
-authorityKeyIdentifier=keyid:always,issuer
+authorityKeyIdentifier=keyid:always,issuer:always
 
 # This is what PKIX recommends but some broken software chokes on critical
 # extensions.
@@ -264,87 +233,4 @@ basicConstraints = CA:true
 # Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
 
 # issuerAltName=issuer:copy
-authorityKeyIdentifier=keyid:always
-
-[ proxy_cert_ext ]
-# These extensions should be added when creating a proxy certificate
-
-# This goes against PKIX guidelines but some CAs do it and some software
-# requires this to avoid interpreting an end user certificate as a CA.
-
-basicConstraints=CA:FALSE
-
-# Here are some examples of the usage of nsCertType. If it is omitted
-# the certificate can be used for anything *except* object signing.
-
-# This is OK for an SSL server.
-# nsCertType			= server
-
-# For an object signing certificate this would be used.
-# nsCertType = objsign
-
-# For normal client use this is typical
-# nsCertType = client, email
-
-# and for everything including object signing:
-# nsCertType = client, email, objsign
-
-# This is typical in keyUsage for a client certificate.
-# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
-
-# This will be displayed in Netscape's comment listbox.
-nsComment			= "OpenSSL Generated Certificate"
-
-# PKIX recommendations harmless if included in all certificates.
-subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer
-
-# This stuff is for subjectAltName and issuerAltname.
-# Import the email address.
-# subjectAltName=email:copy
-# An alternative to produce certificates that aren't
-# deprecated according to PKIX.
-# subjectAltName=email:move
-
-# Copy subject details
-# issuerAltName=issuer:copy
-
-#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
-#nsBaseUrl
-#nsRevocationUrl
-#nsRenewalUrl
-#nsCaPolicyUrl
-#nsSslServerName
-
-# This really needs to be in place for it to be a proxy certificate.
-proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
-
-####################################################################
-[ tsa ]
-
-default_tsa = tsa_config1	# the default TSA section
-
-[ tsa_config1 ]
-
-# These are used by the TSA reply generation only.
-dir		= sys\$disk:[.demoCA		# TSA root directory
-serial		= $dir]tsaserial.	# The current serial number (mandatory)
-crypto_device	= builtin		# OpenSSL engine to use for signing
-signer_cert	= $dir/tsacert.pem 	# The TSA signing certificate
-					# (optional)
-certs		= $dir.cacert.pem]	# Certificate chain to include in reply
-					# (optional)
-signer_key	= $dir/private/tsakey.pem # The TSA private key (optional)
-
-default_policy	= tsa_policy1		# Policy if request did not specify it
-					# (optional)
-other_policies	= tsa_policy2, tsa_policy3	# acceptable policies (optional)
-digests		= md5, sha1		# Acceptable message digests (mandatory)
-accuracy	= secs:1, millisecs:500, microsecs:100	# (optional)
-clock_precision_digits  = 0	# number of digits after dot. (optional)
-ordering		= yes	# Is ordering defined for timestamps?
-				# (optional, default: no)
-tsa_name		= yes	# Must the TSA name be included in the reply?
-				# (optional, default: no)
-ess_cert_id_chain	= no	# Must the ESS cert id chain be included?
-				# (optional, default: no)
+authorityKeyIdentifier=keyid:always,issuer:always

apps/openssl.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 /* ====================================================================
- * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -122,27 +122,23 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #include <openssl/ssl.h>
-#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
-#endif
 #define USE_SOCKETS /* needed for the _O_BINARY defs in the MS world */
 #include "progs.h"
 #include "s_apps.h"
 #include <openssl/err.h>
-#ifdef OPENSSL_FIPS
-#include <openssl/fips.h>
-#endif
 
 /* The LHASH callbacks ("hash" & "cmp") have been replaced by functions with the
  * base prototypes (we cast each variable inside the function to the required
  * type of "FUNCTION*"). This removes the necessity for macro-generated wrapper
  * functions. */
 
-static LHASH_OF(FUNCTION) *prog_init(void );
-static int do_cmd(LHASH_OF(FUNCTION) *prog,int argc,char *argv[]);
-static void list_pkey(BIO *out);
-static void list_cipher(BIO *out);
-static void list_md(BIO *out);
+/* static unsigned long MS_CALLBACK hash(FUNCTION *a); */
+static unsigned long MS_CALLBACK hash(const void *a_void);
+/* static int MS_CALLBACK cmp(FUNCTION *a,FUNCTION *b); */
+static int MS_CALLBACK cmp(const void *a_void,const void *b_void);
+static LHASH *prog_init(void );
+static int do_cmd(LHASH *prog,int argc,char *argv[]);
 char *default_config_file=NULL;
 
 /* Make sure there is only one when MONOLITH is defined */
@@ -165,7 +161,7 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 		goto err;
 		}
 
-	if (type < 0 || type >= CRYPTO_NUM_LOCKS)
+	if (type < 0 || type > CRYPTO_NUM_LOCKS)
 		{
 		errstr = "type out of bounds";
 		goto err;
@@ -215,75 +211,21 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 		}
 	}
 
-#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
-# define ARGV _Argv
-#else
-# define ARGV Argv
-#endif
 
-int main(int Argc, char *ARGV[])
+int main(int Argc, char *Argv[])
 	{
 	ARGS arg;
 #define PROG_NAME_SIZE	39
 	char pname[PROG_NAME_SIZE+1];
 	FUNCTION f,*fp;
-	MS_STATIC const char *prompt;
-	MS_STATIC char buf[1024];
+	MS_STATIC char *prompt,buf[1024];
 	char *to_free=NULL;
 	int n,i,ret=0;
 	int argc;
 	char **argv,*p;
-	LHASH_OF(FUNCTION) *prog=NULL;
+	LHASH *prog=NULL;
 	long errline;
-
-#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
-	/* 2011-03-22 SMS.
-	 * If we have 32-bit pointers everywhere, then we're safe, and
-	 * we bypass this mess, as on non-VMS systems.  (See ARGV,
-	 * above.)
-	 * Problem 1: Compaq/HP C before V7.3 always used 32-bit
-	 * pointers for argv[].
-	 * Fix 1: For a 32-bit argv[], when we're using 64-bit pointers
-	 * everywhere else, we always allocate and use a 64-bit
-	 * duplicate of argv[].
-	 * Problem 2: Compaq/HP C V7.3 (Alpha, IA64) before ECO1 failed
-	 * to NULL-terminate a 64-bit argv[].  (As this was written, the
-	 * compiler ECO was available only on IA64.)
-	 * Fix 2: Unless advised not to (VMS_TRUST_ARGV), we test a
-	 * 64-bit argv[argc] for NULL, and, if necessary, use a
-	 * (properly) NULL-terminated (64-bit) duplicate of argv[].
-	 * The same code is used in either case to duplicate argv[].
-	 * Some of these decisions could be handled in preprocessing,
-	 * but the code tends to get even uglier, and the penalty for
-	 * deciding at compile- or run-time is tiny.
-	 */
-	char **Argv = NULL;
-	int free_Argv = 0;
-
-	if ((sizeof( _Argv) < 8)        /* 32-bit argv[]. */
-# if !defined( VMS_TRUST_ARGV)
-	 || (_Argv[ Argc] != NULL)      /* Untrusted argv[argc] not NULL. */
-# endif
-		)
-		{
-		int i;
-		Argv = OPENSSL_malloc( (Argc+ 1)* sizeof( char *));
-		if (Argv == NULL)
-			{ ret = -1; goto end; }
-		for(i = 0; i < Argc; i++)
-			Argv[i] = _Argv[i];
-		Argv[ Argc] = NULL;     /* Certain NULL termination. */
-		free_Argv = 1;
-		}
-	else
-		{
-		/* Use the known-good 32-bit argv[] (which needs the
-		 * type cast to satisfy the compiler), or the trusted or
-		 * tested-good 64-bit argv[] as-is. */
-		Argv = (char **)_Argv;
-		}
-#endif /* defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64) */
-
+ 
 	arg.data=NULL;
 	arg.count=0;
 
@@ -313,19 +255,6 @@ int main(int Argc, char *ARGV[])
 		CRYPTO_set_locking_callback(lock_dbg_cb);
 		}
 
-	if(getenv("OPENSSL_FIPS")) {
-#ifdef OPENSSL_FIPS
-		if (!FIPS_mode_set(1)) {
-			ERR_load_crypto_strings();
-			ERR_print_errors(BIO_new_fp(stderr,BIO_NOCLOSE));
-			EXIT(1);
-		}
-#else
-		fprintf(stderr, "FIPS mode not supported.\n");
-		EXIT(1);
-#endif
-		}
-
 	apps_startup();
 
 	/* Lets load up our environment a little */
@@ -341,21 +270,9 @@ int main(int Argc, char *ARGV[])
 	i=NCONF_load(config,p,&errline);
 	if (i == 0)
 		{
-		if (ERR_GET_REASON(ERR_peek_last_error())
-		    == CONF_R_NO_SUCH_FILE)
-			{
-			BIO_printf(bio_err,
-				   "WARNING: can't open config file: %s\n",p);
-			ERR_clear_error();
-			NCONF_free(config);
-			config = NULL;
-			}
-		else
-			{
-			ERR_print_errors(bio_err);
-			NCONF_free(config);
-			exit(1);
-			}
+		NCONF_free(config);
+		config = NULL;
+		ERR_clear_error();
 		}
 
 	prog=prog_init();
@@ -364,7 +281,7 @@ int main(int Argc, char *ARGV[])
 	program_name(Argv[0],pname,sizeof pname);
 
 	f.name=pname;
-	fp=lh_FUNCTION_retrieve(prog,&f);
+	fp=(FUNCTION *)lh_retrieve(prog,&f);
 	if (fp != NULL)
 		{
 		Argv[0]=pname;
@@ -399,8 +316,7 @@ int main(int Argc, char *ARGV[])
 			else	prompt="OpenSSL> ";
 			fputs(prompt,stdout);
 			fflush(stdout);
-			if (!fgets(p,n,stdin))
-				goto end;
+			fgets(p,n,stdin);
 			if (p[0] == '\0') goto end;
 			i=strlen(p);
 			if (i <= 1) break;
@@ -431,7 +347,7 @@ end:
 		NCONF_free(config);
 		config=NULL;
 		}
-	if (prog != NULL) lh_FUNCTION_free(prog);
+	if (prog != NULL) lh_free(prog);
 	if (arg.data != NULL) OPENSSL_free(arg.data);
 
 	apps_shutdown();
@@ -442,25 +358,14 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
-#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
-	/* Free any duplicate Argv[] storage. */
-	if (free_Argv)
-		{
-		OPENSSL_free(Argv);
-		}
-#endif
 	OPENSSL_EXIT(ret);
 	}
 
 #define LIST_STANDARD_COMMANDS "list-standard-commands"
 #define LIST_MESSAGE_DIGEST_COMMANDS "list-message-digest-commands"
-#define LIST_MESSAGE_DIGEST_ALGORITHMS "list-message-digest-algorithms"
 #define LIST_CIPHER_COMMANDS "list-cipher-commands"
-#define LIST_CIPHER_ALGORITHMS "list-cipher-algorithms"
-#define LIST_PUBLIC_KEY_ALGORITHMS "list-public-key-algorithms"
 
-
-static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
+static int do_cmd(LHASH *prog, int argc, char *argv[])
 	{
 	FUNCTION f,*fp;
 	int i,ret=1,tp,nl;
@@ -468,22 +373,7 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 	if ((argc <= 0) || (argv[0] == NULL))
 		{ ret=0; goto end; }
 	f.name=argv[0];
-	fp=lh_FUNCTION_retrieve(prog,&f);
-	if (fp == NULL)
-		{
-		if (EVP_get_digestbyname(argv[0]))
-			{
-			f.type = FUNC_TYPE_MD;
-			f.func = dgst_main;
-			fp = &f;
-			}
-		else if (EVP_get_cipherbyname(argv[0]))
-			{
-			f.type = FUNC_TYPE_CIPHER;
-			f.func = enc_main;
-			fp = &f;
-			}
-		}
+	fp=(FUNCTION *)lh_retrieve(prog,&f);
 	if (fp != NULL)
 		{
 		ret=fp->func(argc,argv);
@@ -498,7 +388,7 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 		}
 #endif
 		f.name=argv[0]+3;
-		ret = (lh_FUNCTION_retrieve(prog,&f) != NULL);
+		ret = (lh_retrieve(prog,&f) != NULL);
 		if (!ret)
 			BIO_printf(bio_stdout, "%s\n", argv[0]);
 		else
@@ -516,10 +406,7 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 		}
 	else if ((strcmp(argv[0],LIST_STANDARD_COMMANDS) == 0) ||
 		(strcmp(argv[0],LIST_MESSAGE_DIGEST_COMMANDS) == 0) ||
-		(strcmp(argv[0],LIST_MESSAGE_DIGEST_ALGORITHMS) == 0) ||
-		(strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0) ||
-		(strcmp(argv[0],LIST_CIPHER_ALGORITHMS) == 0) ||
-		(strcmp(argv[0],LIST_PUBLIC_KEY_ALGORITHMS) == 0))
+		(strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0))
 		{
 		int list_type;
 		BIO *bio_stdout;
@@ -528,12 +415,6 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 			list_type = FUNC_TYPE_GENERAL;
 		else if (strcmp(argv[0],LIST_MESSAGE_DIGEST_COMMANDS) == 0)
 			list_type = FUNC_TYPE_MD;
-		else if (strcmp(argv[0],LIST_MESSAGE_DIGEST_ALGORITHMS) == 0)
-			list_type = FUNC_TYPE_MD_ALG;
-		else if (strcmp(argv[0],LIST_PUBLIC_KEY_ALGORITHMS) == 0)
-			list_type = FUNC_TYPE_PKEY;
-		else if (strcmp(argv[0],LIST_CIPHER_ALGORITHMS) == 0)
-			list_type = FUNC_TYPE_CIPHER_ALG;
 		else /* strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0 */
 			list_type = FUNC_TYPE_CIPHER;
 		bio_stdout = BIO_new_fp(stdout,BIO_NOCLOSE);
@@ -543,23 +424,10 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 		bio_stdout = BIO_push(tmpbio, bio_stdout);
 		}
 #endif
-
-		if (!load_config(bio_err, NULL))
-			goto end;
-
-		if (list_type == FUNC_TYPE_PKEY)
-			list_pkey(bio_stdout);	
-		if (list_type == FUNC_TYPE_MD_ALG)
-			list_md(bio_stdout);	
-		if (list_type == FUNC_TYPE_CIPHER_ALG)
-			list_cipher(bio_stdout);	
-		else
-			{
-			for (fp=functions; fp->name != NULL; fp++)
-				if (fp->type == list_type)
-					BIO_printf(bio_stdout, "%s\n",
-								fp->name);
-			}
+		
+		for (fp=functions; fp->name != NULL; fp++)
+			if (fp->type == list_type)
+				BIO_printf(bio_stdout, "%s\n", fp->name);
 		BIO_free_all(bio_stdout);
 		ret=0;
 		goto end;
@@ -574,11 +442,7 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 		for (fp=functions; fp->name != NULL; fp++)
 			{
 			nl=0;
-#ifdef OPENSSL_NO_CAMELLIA
 			if (((i++) % 5) == 0)
-#else
-			if (((i++) % 4) == 0)
-#endif
 				{
 				BIO_printf(bio_err,"\n");
 				nl=1;
@@ -599,11 +463,7 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 					BIO_printf(bio_err,"\nCipher commands (see the `enc' command for more details)\n");
 					}
 				}
-#ifdef OPENSSL_NO_CAMELLIA
 			BIO_printf(bio_err,"%-15s",fp->name);
-#else
-			BIO_printf(bio_err,"%-18s",fp->name);
-#endif
 			}
 		BIO_printf(bio_err,"\n\n");
 		ret=0;
@@ -622,107 +482,34 @@ static int SortFnByName(const void *_f1,const void *_f2)
     return strcmp(f1->name,f2->name);
     }
 
-static void list_pkey(BIO *out)
+static LHASH *prog_init(void)
 	{
-	int i;
-	for (i = 0; i < EVP_PKEY_asn1_get_count(); i++)
-		{
-		const EVP_PKEY_ASN1_METHOD *ameth;
-		int pkey_id, pkey_base_id, pkey_flags;
-		const char *pinfo, *pem_str;
-		ameth = EVP_PKEY_asn1_get0(i);
-		EVP_PKEY_asn1_get0_info(&pkey_id, &pkey_base_id, &pkey_flags,
-						&pinfo, &pem_str, ameth);
-		if (pkey_flags & ASN1_PKEY_ALIAS)
-			{
-			BIO_printf(out, "Name: %s\n", 
-					OBJ_nid2ln(pkey_id));
-			BIO_printf(out, "\tType: Alias to %s\n",
-					OBJ_nid2ln(pkey_base_id));
-			}
-		else
-			{
-			BIO_printf(out, "Name: %s\n", pinfo);
-			BIO_printf(out, "\tType: %s Algorithm\n", 
-				pkey_flags & ASN1_PKEY_DYNAMIC ?
-					"External" : "Builtin");
-			BIO_printf(out, "\tOID: %s\n", OBJ_nid2ln(pkey_id));
-			if (pem_str == NULL)
-				pem_str = "(none)";
-			BIO_printf(out, "\tPEM string: %s\n", pem_str);
-			}
-					
-		}
-	}
-
-static void list_cipher_fn(const EVP_CIPHER *c,
-			const char *from, const char *to, void *arg)
-	{
-	if (c)
-		BIO_printf(arg, "%s\n", EVP_CIPHER_name(c));
-	else
-		{
-		if (!from)
-			from = "<undefined>";
-		if (!to)
-			to = "<undefined>";
-		BIO_printf(arg, "%s => %s\n", from, to);
-		}
-	}
-
-static void list_cipher(BIO *out)
-	{
-	EVP_CIPHER_do_all_sorted(list_cipher_fn, out);
-	}
-
-static void list_md_fn(const EVP_MD *m,
-			const char *from, const char *to, void *arg)
-	{
-	if (m)
-		BIO_printf(arg, "%s\n", EVP_MD_name(m));
-	else
-		{
-		if (!from)
-			from = "<undefined>";
-		if (!to)
-			to = "<undefined>";
-		BIO_printf(arg, "%s => %s\n", from, to);
-		}
-	}
-
-static void list_md(BIO *out)
-	{
-	EVP_MD_do_all_sorted(list_md_fn, out);
-	}
-
-static int MS_CALLBACK function_cmp(const FUNCTION *a, const FUNCTION *b)
-	{
-	return strncmp(a->name,b->name,8);
-	}
-static IMPLEMENT_LHASH_COMP_FN(function, FUNCTION)
-
-static unsigned long MS_CALLBACK function_hash(const FUNCTION *a)
-	{
-	return lh_strhash(a->name);
-	}	
-static IMPLEMENT_LHASH_HASH_FN(function, FUNCTION)
-
-static LHASH_OF(FUNCTION) *prog_init(void)
-	{
-	LHASH_OF(FUNCTION) *ret;
+	LHASH *ret;
 	FUNCTION *f;
-	size_t i;
+	int i;
 
 	/* Purely so it looks nice when the user hits ? */
 	for(i=0,f=functions ; f->name != NULL ; ++f,++i)
 	    ;
 	qsort(functions,i,sizeof *functions,SortFnByName);
 
-	if ((ret=lh_FUNCTION_new()) == NULL)
+	if ((ret=lh_new(hash, cmp)) == NULL)
 		return(NULL);
 
 	for (f=functions; f->name != NULL; f++)
-		(void)lh_FUNCTION_insert(ret,f);
+		lh_insert(ret,f);
 	return(ret);
 	}
 
+/* static int MS_CALLBACK cmp(FUNCTION *a, FUNCTION *b) */
+static int MS_CALLBACK cmp(const void *a_void, const void *b_void)
+	{
+	return(strncmp(((FUNCTION *)a_void)->name,
+			((FUNCTION *)b_void)->name,8));
+	}
+
+/* static unsigned long MS_CALLBACK hash(FUNCTION *a) */
+static unsigned long MS_CALLBACK hash(const void *a_void)
+	{
+	return(lh_strhash(((FUNCTION *)a_void)->name));
+	}

apps/openssl.cnf

@@ -21,17 +21,12 @@ oid_section		= new_oids
 
 [ new_oids ]
 
-# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
+# We can add new OIDs in here for use by 'ca' and 'req'.
 # Add a simple OID like this:
 # testoid1=1.2.3.4
 # Or use config file substitution like this:
 # testoid2=${testoid1}.5.6
 
-# Policies used by the TSA examples.
-tsa_policy1 = 1.2.3.4.1
-tsa_policy2 = 1.2.3.4.5.6
-tsa_policy3 = 1.2.3.4.5.7
-
 ####################################################################
 [ ca ]
 default_ca	= CA_default		# The default ca section
@@ -43,14 +38,10 @@ dir		= ./demoCA		# Where everything is kept
 certs		= $dir/certs		# Where the issued certs are kept
 crl_dir		= $dir/crl		# Where the issued crl are kept
 database	= $dir/index.txt	# database index file.
-#unique_subject	= no			# Set to 'no' to allow creation of
-					# several ctificates with same subject.
 new_certs_dir	= $dir/newcerts		# default place for new certs.
 
 certificate	= $dir/cacert.pem 	# The CA certificate
 serial		= $dir/serial 		# The current serial number
-crlnumber	= $dir/crlnumber	# the current crl number
-					# must be commented out to leave a V1 CRL
 crl		= $dir/crl.pem 		# The current CRL
 private_key	= $dir/private/cakey.pem# The private key
 RANDFILE	= $dir/private/.rand	# private random number file
@@ -67,12 +58,11 @@ cert_opt 	= ca_default		# Certificate field options
 
 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
-# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= default		# use public key default MD
+default_md	= md5			# which md to use.
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -115,12 +105,13 @@ x509_extensions	= v3_ca	# The extentions to add to the self signed cert
 
 # This sets a mask for permitted string types. There are several options. 
 # default: PrintableString, T61String, BMPString.
-# pkix	 : PrintableString, BMPString (PKIX recommendation before 2004)
-# utf8only: only UTF8Strings (PKIX recommendation after 2004).
+# pkix	 : PrintableString, BMPString.
+# utf8only: only UTF8Strings.
 # nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
 # MASK:XXXX a literal mask value.
-# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
-string_mask = utf8only
+# WARNING: current versions of Netscape crash on BMPStrings or UTF8Strings
+# so use this option with caution!
+string_mask = nombstr
 
 # req_extensions = v3_req # The extensions to add to a certificate request
 
@@ -192,7 +183,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer
+authorityKeyIdentifier=keyid,issuer:always
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
@@ -211,9 +202,6 @@ authorityKeyIdentifier=keyid,issuer
 #nsCaPolicyUrl
 #nsSslServerName
 
-# This is required for TSA certificates.
-# extendedKeyUsage = critical,timeStamping
-
 [ v3_req ]
 
 # Extensions to add to a certificate request
@@ -231,7 +219,7 @@ keyUsage = nonRepudiation, digitalSignature, keyEncipherment
 
 subjectKeyIdentifier=hash
 
-authorityKeyIdentifier=keyid:always,issuer
+authorityKeyIdentifier=keyid:always,issuer:always
 
 # This is what PKIX recommends but some broken software chokes on critical
 # extensions.
@@ -264,87 +252,4 @@ basicConstraints = CA:true
 # Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
 
 # issuerAltName=issuer:copy
-authorityKeyIdentifier=keyid:always
-
-[ proxy_cert_ext ]
-# These extensions should be added when creating a proxy certificate
-
-# This goes against PKIX guidelines but some CAs do it and some software
-# requires this to avoid interpreting an end user certificate as a CA.
-
-basicConstraints=CA:FALSE
-
-# Here are some examples of the usage of nsCertType. If it is omitted
-# the certificate can be used for anything *except* object signing.
-
-# This is OK for an SSL server.
-# nsCertType			= server
-
-# For an object signing certificate this would be used.
-# nsCertType = objsign
-
-# For normal client use this is typical
-# nsCertType = client, email
-
-# and for everything including object signing:
-# nsCertType = client, email, objsign
-
-# This is typical in keyUsage for a client certificate.
-# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
-
-# This will be displayed in Netscape's comment listbox.
-nsComment			= "OpenSSL Generated Certificate"
-
-# PKIX recommendations harmless if included in all certificates.
-subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer
-
-# This stuff is for subjectAltName and issuerAltname.
-# Import the email address.
-# subjectAltName=email:copy
-# An alternative to produce certificates that aren't
-# deprecated according to PKIX.
-# subjectAltName=email:move
-
-# Copy subject details
-# issuerAltName=issuer:copy
-
-#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
-#nsBaseUrl
-#nsRevocationUrl
-#nsRenewalUrl
-#nsCaPolicyUrl
-#nsSslServerName
-
-# This really needs to be in place for it to be a proxy certificate.
-proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
-
-####################################################################
-[ tsa ]
-
-default_tsa = tsa_config1	# the default TSA section
-
-[ tsa_config1 ]
-
-# These are used by the TSA reply generation only.
-dir		= ./demoCA		# TSA root directory
-serial		= $dir/tsaserial	# The current serial number (mandatory)
-crypto_device	= builtin		# OpenSSL engine to use for signing
-signer_cert	= $dir/tsacert.pem 	# The TSA signing certificate
-					# (optional)
-certs		= $dir/cacert.pem	# Certificate chain to include in reply
-					# (optional)
-signer_key	= $dir/private/tsakey.pem # The TSA private key (optional)
-
-default_policy	= tsa_policy1		# Policy if request did not specify it
-					# (optional)
-other_policies	= tsa_policy2, tsa_policy3	# acceptable policies (optional)
-digests		= md5, sha1		# Acceptable message digests (mandatory)
-accuracy	= secs:1, millisecs:500, microsecs:100	# (optional)
-clock_precision_digits  = 0	# number of digits after dot. (optional)
-ordering		= yes	# Is ordering defined for timestamps?
-				# (optional, default: no)
-tsa_name		= yes	# Must the TSA name be included in the reply?
-				# (optional, default: no)
-ess_cert_id_chain	= no	# Must the ESS cert id chain be included?
-				# (optional, default: no)
+authorityKeyIdentifier=keyid:always,issuer:always

apps/passwd.c

@@ -312,8 +312,7 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	static char out_buf[6 + 9 + 24 + 2]; /* "$apr1$..salt..$.......md5hash..........\0" */
 	unsigned char buf[MD5_DIGEST_LENGTH];
 	char *salt_out;
-	int n;
-	unsigned int i;
+	int n, i;
 	EVP_MD_CTX md,md2;
 	size_t passwd_len, salt_len;
 
@@ -359,13 +358,13 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	for (i = 0; i < 1000; i++)
 		{
 		EVP_DigestInit_ex(&md2,EVP_md5(), NULL);
-		EVP_DigestUpdate(&md2, (i & 1) ? (unsigned const char *) passwd : buf,
+		EVP_DigestUpdate(&md2, (i & 1) ? (unsigned char *) passwd : buf,
 		                       (i & 1) ? passwd_len : sizeof buf);
 		if (i % 3)
 			EVP_DigestUpdate(&md2, salt_out, salt_len);
 		if (i % 7)
 			EVP_DigestUpdate(&md2, passwd, passwd_len);
-		EVP_DigestUpdate(&md2, (i & 1) ? buf : (unsigned const char *) passwd,
+		EVP_DigestUpdate(&md2, (i & 1) ? buf : (unsigned char *) passwd,
 		                       (i & 1) ? sizeof buf : passwd_len);
 		EVP_DigestFinal_ex(&md2, buf, NULL);
 		}
@@ -474,8 +473,7 @@ static int do_passwd(int passed_salt, char **salt_p, char **salt_malloc_p,
 	if ((strlen(passwd) > pw_maxlen))
 		{
 		if (!quiet)
-			/* XXX: really we should know how to print a size_t, not cast it */
-			BIO_printf(bio_err, "Warning: truncating password to %u characters\n", (unsigned)pw_maxlen);
+			BIO_printf(bio_err, "Warning: truncating password to %u characters\n", pw_maxlen);
 		passwd[pw_maxlen] = 0;
 		}
 	assert(strlen(passwd) <= pw_maxlen);

apps/pkcs12.c

@@ -1,9 +1,11 @@
 /* pkcs12.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
+
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
  * project.
  */
 /* ====================================================================
- * Copyright (c) 1999-2006 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -56,9 +58,6 @@
  *
  */
 
-#include <openssl/opensslconf.h>
-#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -84,11 +83,10 @@ int dump_certs_keys_p12(BIO *out, PKCS12 *p12, char *pass, int passlen, int opti
 int dump_certs_pkeys_bags(BIO *out, STACK_OF(PKCS12_SAFEBAG) *bags, char *pass,
 			  int passlen, int options, char *pempass);
 int dump_certs_pkeys_bag(BIO *out, PKCS12_SAFEBAG *bags, char *pass, int passlen, int options, char *pempass);
-int print_attribs(BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name);
+int print_attribs(BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst, char *name);
 void hex_prin(BIO *out, unsigned char *buf, int len);
 int alg_print(BIO *x, X509_ALGOR *alg);
 int cert_load(BIO *in, STACK_OF(X509) *sk);
-static int set_pbe(BIO *err, int *ppbe, const char *str);
 
 int MAIN(int, char **);
 
@@ -101,7 +99,6 @@ int MAIN(int argc, char **argv)
     char **args;
     char *name = NULL;
     char *csp_name = NULL;
-    int add_lmk = 0;
     PKCS12 *p12 = NULL;
     char pass[50], macpass[50];
     int export_cert = 0;
@@ -117,16 +114,13 @@ int MAIN(int argc, char **argv)
     int ret = 1;
     int macver = 1;
     int noprompt = 0;
-    STACK_OF(OPENSSL_STRING) *canames = NULL;
+    STACK *canames = NULL;
     char *cpass = NULL, *mpass = NULL;
     char *passargin = NULL, *passargout = NULL, *passarg = NULL;
     char *passin = NULL, *passout = NULL;
     char *inrand = NULL;
-    char *macalg = NULL;
     char *CApath = NULL, *CAfile = NULL;
-#ifndef OPENSSL_NO_ENGINE
     char *engine=NULL;
-#endif
 
     apps_startup();
 
@@ -156,22 +150,14 @@ int MAIN(int argc, char **argv)
     			cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
 		else if (!strcmp (*args, "-export")) export_cert = 1;
 		else if (!strcmp (*args, "-des")) enc=EVP_des_cbc();
-		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
 #ifndef OPENSSL_NO_IDEA
 		else if (!strcmp (*args, "-idea")) enc=EVP_idea_cbc();
 #endif
-#ifndef OPENSSL_NO_SEED
-		else if (!strcmp(*args, "-seed")) enc=EVP_seed_cbc();
-#endif
+		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
 #ifndef OPENSSL_NO_AES
 		else if (!strcmp(*args,"-aes128")) enc=EVP_aes_128_cbc();
 		else if (!strcmp(*args,"-aes192")) enc=EVP_aes_192_cbc();
 		else if (!strcmp(*args,"-aes256")) enc=EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (!strcmp(*args,"-camellia128")) enc=EVP_camellia_128_cbc();
-		else if (!strcmp(*args,"-camellia192")) enc=EVP_camellia_192_cbc();
-		else if (!strcmp(*args,"-camellia256")) enc=EVP_camellia_256_cbc();
 #endif
 		else if (!strcmp (*args, "-noiter")) iter = 1;
 		else if (!strcmp (*args, "-maciter"))
@@ -180,18 +166,32 @@ int MAIN(int argc, char **argv)
 					 maciter = 1;
 		else if (!strcmp (*args, "-nomac"))
 					 maciter = -1;
-		else if (!strcmp (*args, "-macalg"))
-		    if (args[1]) {
-			args++;	
-			macalg = *args;
-		    } else badarg = 1;
 		else if (!strcmp (*args, "-nodes")) enc=NULL;
 		else if (!strcmp (*args, "-certpbe")) {
-			if (!set_pbe(bio_err, &cert_pbe, *++args))
-				badarg = 1;
+			if (args[1]) {
+				args++;
+				if (!strcmp(*args, "NONE"))
+					cert_pbe = -1;
+				cert_pbe=OBJ_txt2nid(*args);
+				if(cert_pbe == NID_undef) {
+					BIO_printf(bio_err,
+						 "Unknown PBE algorithm %s\n", *args);
+					badarg = 1;
+				}
+			} else badarg = 1;
 		} else if (!strcmp (*args, "-keypbe")) {
-			if (!set_pbe(bio_err, &key_pbe, *++args))
-				badarg = 1;
+			if (args[1]) {
+				args++;
+				if (!strcmp(*args, "NONE"))
+					key_pbe = -1;
+				else
+					key_pbe=OBJ_txt2nid(*args);
+				if(key_pbe == NID_undef) {
+					BIO_printf(bio_err,
+						 "Unknown PBE algorithm %s\n", *args);
+					badarg = 1;
+				}
+			} else badarg = 1;
 		} else if (!strcmp (*args, "-rand")) {
 		    if (args[1]) {
 			args++;	
@@ -212,9 +212,7 @@ int MAIN(int argc, char **argv)
 			args++;	
 			name = *args;
 		    } else badarg = 1;
-		} else if (!strcmp (*args, "-LMK"))
-			add_lmk = 1;
-		else if (!strcmp (*args, "-CSP")) {
+		} else if (!strcmp (*args, "-CSP")) {
 		    if (args[1]) {
 			args++;	
 			csp_name = *args;
@@ -222,8 +220,8 @@ int MAIN(int argc, char **argv)
 		} else if (!strcmp (*args, "-caname")) {
 		    if (args[1]) {
 			args++;	
-			if (!canames) canames = sk_OPENSSL_STRING_new_null();
-			sk_OPENSSL_STRING_push(canames, *args);
+			if (!canames) canames = sk_new_null();
+			sk_push(canames, *args);
 		    } else badarg = 1;
 		} else if (!strcmp (*args, "-in")) {
 		    if (args[1]) {
@@ -261,13 +259,11 @@ int MAIN(int argc, char **argv)
 			args++;	
 			CAfile = *args;
 		    } else badarg = 1;
-#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 		    if (args[1]) {
 			args++;	
 			engine = *args;
 		    } else badarg = 1;
-#endif
 		} else badarg = 1;
 
 	} else badarg = 1;
@@ -299,46 +295,30 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 	BIO_printf (bio_err, "-idea         encrypt private keys with idea\n");
 #endif
-#ifndef OPENSSL_NO_SEED
-	BIO_printf (bio_err, "-seed         encrypt private keys with seed\n");
-#endif
 #ifndef OPENSSL_NO_AES
 	BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
 	BIO_printf (bio_err, "              encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	BIO_printf (bio_err, "-camellia128, -camellia192, -camellia256\n");
-	BIO_printf (bio_err, "              encrypt PEM output with cbc camellia\n");
 #endif
 	BIO_printf (bio_err, "-nodes        don't encrypt private keys\n");
 	BIO_printf (bio_err, "-noiter       don't use encryption iteration\n");
-	BIO_printf (bio_err, "-nomaciter    don't use MAC iteration\n");
 	BIO_printf (bio_err, "-maciter      use MAC iteration\n");
-	BIO_printf (bio_err, "-nomac        don't generate MAC\n");
 	BIO_printf (bio_err, "-twopass      separate MAC, encryption passwords\n");
 	BIO_printf (bio_err, "-descert      encrypt PKCS#12 certificates with triple DES (default RC2-40)\n");
 	BIO_printf (bio_err, "-certpbe alg  specify certificate PBE algorithm (default RC2-40)\n");
 	BIO_printf (bio_err, "-keypbe alg   specify private key PBE algorithm (default 3DES)\n");
-	BIO_printf (bio_err, "-macalg alg   digest algorithm used in MAC (default SHA1)\n");
 	BIO_printf (bio_err, "-keyex        set MS key exchange type\n");
 	BIO_printf (bio_err, "-keysig       set MS key signature type\n");
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
 	BIO_printf (bio_err, "-passin p     input file pass phrase source\n");
 	BIO_printf (bio_err, "-passout p    output file pass phrase source\n");
-#ifndef OPENSSL_NO_ENGINE
 	BIO_printf (bio_err, "-engine e     use engine e, possibly a hardware device.\n");
-#endif
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
-	BIO_printf(bio_err,  "-CSP name     Microsoft CSP name\n");
-	BIO_printf(bio_err,  "-LMK          Add local machine keyset attribute to private key\n");
     	goto end;
     }
 
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-#endif
 
     if(passarg) {
 	if(export_cert) passargout = passarg;
@@ -422,7 +402,6 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *key = NULL;
 	X509 *ucert = NULL, *x = NULL;
 	STACK_OF(X509) *certs=NULL;
-	const EVP_MD *macmd = NULL;
 	unsigned char *catmp = NULL;
 	int i;
 
@@ -473,7 +452,7 @@ int MAIN(int argc, char **argv)
 					X509_keyid_set1(ucert, NULL, 0);
 					X509_alias_set1(ucert, NULL, 0);
 					/* Remove from list */
-					(void)sk_X509_delete(certs, i);
+					sk_X509_delete(certs, i);
 					break;
 					}
 				}
@@ -538,29 +517,20 @@ int MAIN(int argc, char **argv)
 		    X509_free(sk_X509_value(chain2, 0));
 		    sk_X509_free(chain2);
 		} else {
-			if (vret >= 0)
-				BIO_printf (bio_err, "Error %s getting chain.\n",
+			BIO_printf (bio_err, "Error %s getting chain.\n",
 					X509_verify_cert_error_string(vret));
-			else
-				ERR_print_errors(bio_err);
 			goto export_end;
 		}			
     	}
 
 	/* Add any CA names */
 
-	for (i = 0; i < sk_OPENSSL_STRING_num(canames); i++)
+	for (i = 0; i < sk_num(canames); i++)
 		{
-		catmp = (unsigned char *)sk_OPENSSL_STRING_value(canames, i);
+		catmp = (unsigned char *)sk_value(canames, i);
 		X509_alias_set1(sk_X509_value(certs, i), catmp, -1);
 		}
-
-	if (csp_name && key)
-		EVP_PKEY_add1_attr_by_NID(key, NID_ms_csp_name,
-				MBSTRING_ASC, (unsigned char *)csp_name, -1);
-
-	if (add_lmk && key)
-		EVP_PKEY_add1_attr_by_NID(key, NID_LocalKeySet, 0, NULL, -1);
+		
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -573,14 +543,14 @@ int MAIN(int argc, char **argv)
 	    	BIO_printf (bio_err, "Can't read Password\n");
 	    	goto export_end;
         	}
-	if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
+	if (!twopass) strcpy(macpass, pass);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("creating PKCS#12 structure");
 #endif
 
-	p12 = PKCS12_create(cpass, name, key, ucert, certs,
+	p12 = PKCS12_create(pass, name, key, ucert, certs,
 				key_pbe, cert_pbe, iter, -1, keytype);
 
 	if (!p12)
@@ -589,18 +559,8 @@ int MAIN(int argc, char **argv)
 		goto export_end;
 		}
 
-	if (macalg)
-		{
-		macmd = EVP_get_digestbyname(macalg);
-		if (!macmd)
-			{
-			BIO_printf(bio_err, "Unknown digest algorithm %s\n", 
-						macalg);
-			}
-		}
-
 	if (maciter != -1)
-		PKCS12_set_mac(p12, mpass, -1, NULL, 0, maciter, macmd);
+		PKCS12_set_mac(p12, mpass, -1, NULL, 0, maciter, NULL);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -645,15 +605,15 @@ int MAIN(int argc, char **argv)
     CRYPTO_pop_info();
 #endif
 
-    if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
+    if (!twopass) strcpy(macpass, pass);
 
-    if ((options & INFO) && p12->mac) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
+    if (options & INFO) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
     if(macver) {
 #ifdef CRYPTO_MDEBUG
     CRYPTO_push_info("verify MAC");
 #endif
 	/* If we enter empty password try no password first */
-	if(!mpass[0] && PKCS12_verify_mac(p12, NULL, 0)) {
+	if(!macpass[0] && PKCS12_verify_mac(p12, NULL, 0)) {
 		/* If mac and crypto pass the same set it to NULL too */
 		if(!twopass) cpass = NULL;
 	} else if (!PKCS12_verify_mac(p12, mpass, -1)) {
@@ -687,7 +647,7 @@ int MAIN(int argc, char **argv)
 #endif
     BIO_free(in);
     BIO_free_all(out);
-    if (canames) sk_OPENSSL_STRING_free(canames);
+    if (canames) sk_free(canames);
     if(passin) OPENSSL_free(passin);
     if(passout) OPENSSL_free(passout);
     apps_shutdown();
@@ -697,10 +657,9 @@ int MAIN(int argc, char **argv)
 int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
 	     int passlen, int options, char *pempass)
 {
-	STACK_OF(PKCS7) *asafes = NULL;
+	STACK_OF(PKCS7) *asafes;
 	STACK_OF(PKCS12_SAFEBAG) *bags;
 	int i, bagnid;
-	int ret = 0;
 	PKCS7 *p7;
 
 	if (!( asafes = PKCS12_unpack_authsafes(p12))) return 0;
@@ -718,22 +677,16 @@ int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
 			}
 			bags = PKCS12_unpack_p7encdata(p7, pass, passlen);
 		} else continue;
-		if (!bags) goto err;
+		if (!bags) return 0;
 	    	if (!dump_certs_pkeys_bags (out, bags, pass, passlen, 
 						 options, pempass)) {
 			sk_PKCS12_SAFEBAG_pop_free (bags, PKCS12_SAFEBAG_free);
-			goto err;
+			return 0;
 		}
 		sk_PKCS12_SAFEBAG_pop_free (bags, PKCS12_SAFEBAG_free);
-		bags = NULL;
 	}
-	ret = 1;
-
-	err:
-
-	if (asafes)
-		sk_PKCS7_pop_free (asafes, PKCS7_free);
-	return ret;
+	sk_PKCS7_pop_free (asafes, PKCS7_free);
+	return 1;
 }
 
 int dump_certs_pkeys_bags (BIO *out, STACK_OF(PKCS12_SAFEBAG) *bags,
@@ -828,7 +781,7 @@ int get_cert_chain (X509 *cert, X509_STORE *store, STACK_OF(X509) **chain)
 {
 	X509_STORE_CTX store_ctx;
 	STACK_OF(X509) *chn;
-	int i = 0;
+	int i;
 
 	/* FIXME: Should really check the return status of X509_STORE_CTX_init
 	 * for an error, but how that fits into the return value of this
@@ -836,17 +789,13 @@ int get_cert_chain (X509 *cert, X509_STORE *store, STACK_OF(X509) **chain)
 	X509_STORE_CTX_init(&store_ctx, store, cert, NULL);
 	if (X509_verify_cert(&store_ctx) <= 0) {
 		i = X509_STORE_CTX_get_error (&store_ctx);
-		if (i == 0)
-			/* avoid returning 0 if X509_verify_cert() did not
-			 * set an appropriate error value in the context */
-			i = -1;
-		chn = NULL;
 		goto err;
-	} else
-		chn = X509_STORE_CTX_get1_chain(&store_ctx);
+	}
+	chn =  X509_STORE_CTX_get1_chain(&store_ctx);
+	i = 0;
+	*chain = chn;
 err:
 	X509_STORE_CTX_cleanup(&store_ctx);
-	*chain = chn;
 	
 	return i;
 }	
@@ -854,16 +803,13 @@ err:
 int alg_print (BIO *x, X509_ALGOR *alg)
 {
 	PBEPARAM *pbe;
-	const unsigned char *p;
+	unsigned char *p;
 	p = alg->parameter->value.sequence->data;
-	pbe = d2i_PBEPARAM(NULL, &p, alg->parameter->value.sequence->length);
-	if (!pbe)
-		return 1;
-	BIO_printf (bio_err, "%s, Iteration %ld\n", 
-		OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)),
-		ASN1_INTEGER_get(pbe->iter));
+	pbe = d2i_PBEPARAM (NULL, &p, alg->parameter->value.sequence->length);
+	BIO_printf (bio_err, "%s, Iteration %d\n", 
+	OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)), ASN1_INTEGER_get(pbe->iter));
 	PBEPARAM_free (pbe);
-	return 1;
+	return 0;
 }
 
 /* Load all certificates from a given file */
@@ -895,7 +841,7 @@ int cert_load(BIO *in, STACK_OF(X509) *sk)
 
 /* Generalised attribute print: handle PKCS#8 and bag attributes */
 
-int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name)
+int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst, char *name)
 {
 	X509_ATTRIBUTE *attr;
 	ASN1_TYPE *av;
@@ -923,7 +869,7 @@ int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name)
 			av = sk_ASN1_TYPE_value(attr->value.set, 0);
 			switch(av->type) {
 				case V_ASN1_BMPSTRING:
-        			value = OPENSSL_uni2asc(av->value.bmpstring->data,
+        			value = uni2asc(av->value.bmpstring->data,
                                 	       av->value.bmpstring->length);
 				BIO_printf(out, "%s\n", value);
 				OPENSSL_free(value);
@@ -956,22 +902,4 @@ void hex_prin(BIO *out, unsigned char *buf, int len)
 	for (i = 0; i < len; i++) BIO_printf (out, "%02X ", buf[i]);
 }
 
-static int set_pbe(BIO *err, int *ppbe, const char *str)
-	{
-	if (!str)
-		return 0;
-	if (!strcmp(str, "NONE"))
-		{
-		*ppbe = -1;
-		return 1;
-		}
-	*ppbe=OBJ_txt2nid(str);
-	if (*ppbe == NID_undef)
-		{
-		BIO_printf(bio_err, "Unknown PBE algorithm %s\n", str);
-		return 0;
-		}
-	return 1;
-	}
-			
 #endif

apps/pkcs7.c

@@ -82,16 +82,15 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat;
 	char *infile,*outfile,*prog;
-	int print_certs=0,text=0,noout=0,p7_print=0;
+	int print_certs=0,text=0,noout=0;
 	int ret=1;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
@@ -99,9 +98,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -136,17 +132,13 @@ int MAIN(int argc, char **argv)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
-		else if (strcmp(*argv,"-print") == 0)
-			p7_print=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -169,18 +161,14 @@ bad:
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
 		ret = 1;
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
+        e = setup_engine(bio_err, engine, 0);
 
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -237,9 +225,6 @@ bad:
 			}
 		}
 
-	if (p7_print)
-		PKCS7_print_ctx(out, p7, 0, NULL);
-
 	if (print_certs)
 		{
 		STACK_OF(X509) *certs=NULL;

apps/pkcs8.c

@@ -1,6 +1,6 @@
 /* pkcs8.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
- * project 1999-2004.
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+ * project 1999.
  */
 /* ====================================================================
  * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
@@ -68,7 +68,7 @@
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
-	{
+{
 	ENGINE *e = NULL;
 	char **args, *infile = NULL, *outfile = NULL;
 	char *passargin = NULL, *passargout = NULL;
@@ -80,15 +80,12 @@ int MAIN(int argc, char **argv)
 	int informat, outformat;
 	int p8_broken = PKCS8_OK;
 	int nocrypt = 0;
-	X509_SIG *p8 = NULL;
-	PKCS8_PRIV_KEY_INFO *p8inf = NULL;
+	X509_SIG *p8;
+	PKCS8_PRIV_KEY_INFO *p8inf;
 	EVP_PKEY *pkey=NULL;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
-	int ret = 1;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
@@ -101,70 +98,43 @@ int MAIN(int argc, char **argv)
 	ERR_load_crypto_strings();
 	OpenSSL_add_all_algorithms();
 	args = argv + 1;
-	while (!badarg && *args && *args[0] == '-')
-		{
-		if (!strcmp(*args,"-v2"))
-			{
-			if (args[1])
-				{
+	while (!badarg && *args && *args[0] == '-') {
+		if (!strcmp(*args,"-v2")) {
+			if (args[1]) {
 				args++;
 				cipher=EVP_get_cipherbyname(*args);
-				if (!cipher)
-					{
+				if(!cipher) {
 					BIO_printf(bio_err,
 						 "Unknown cipher %s\n", *args);
 					badarg = 1;
-					}
 				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp(*args,"-v1"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp(*args,"-v1")) {
+			if (args[1]) {
 				args++;
 				pbe_nid=OBJ_txt2nid(*args);
-				if (pbe_nid == NID_undef)
-					{
+				if(pbe_nid == NID_undef) {
 					BIO_printf(bio_err,
 						 "Unknown PBE algorithm %s\n", *args);
 					badarg = 1;
-					}
 				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp(*args,"-inform"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp(*args,"-inform")) {
+			if (args[1]) {
 				args++;
 				informat=str2fmt(*args);
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp(*args,"-outform"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp(*args,"-outform")) {
+			if (args[1]) {
 				args++;
 				outformat=str2fmt(*args);
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp (*args, "-topk8"))
-			topk8 = 1;
-		else if (!strcmp (*args, "-noiter"))
-			iter = 1;
-		else if (!strcmp (*args, "-nocrypt"))
-			nocrypt = 1;
-		else if (!strcmp (*args, "-nooct"))
-			p8_broken = PKCS8_NO_OCTET;
-		else if (!strcmp (*args, "-nsdb"))
-			p8_broken = PKCS8_NS_DB;
-		else if (!strcmp (*args, "-embed"))
-			p8_broken = PKCS8_EMBEDDED_PARAM;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-topk8")) topk8 = 1;
+		else if (!strcmp (*args, "-noiter")) iter = 1;
+		else if (!strcmp (*args, "-nocrypt")) nocrypt = 1;
+		else if (!strcmp (*args, "-nooct")) p8_broken = PKCS8_NO_OCTET;
+		else if (!strcmp (*args, "-nsdb")) p8_broken = PKCS8_NS_DB;
+		else if (!strcmp (*args, "-embed")) p8_broken = PKCS8_EMBEDDED_PARAM;
 		else if (!strcmp(*args,"-passin"))
 			{
 			if (!args[1]) goto bad;
@@ -175,37 +145,26 @@ int MAIN(int argc, char **argv)
 			if (!args[1]) goto bad;
 			passargout= *(++args);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*args,"-engine") == 0)
 			{
 			if (!args[1]) goto bad;
 			engine= *(++args);
 			}
-#endif
-		else if (!strcmp (*args, "-in"))
-			{
-			if (args[1])
-				{
+		else if (!strcmp (*args, "-in")) {
+			if (args[1]) {
 				args++;
 				infile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp (*args, "-out"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-out")) {
+			if (args[1]) {
 				args++;
 				outfile = *args;
-				}
-			else badarg = 1;
-			}
-		else badarg = 1;
+			} else badarg = 1;
+		} else badarg = 1;
 		args++;
-		}
+	}
 
-	if (badarg)
-		{
+	if (badarg) {
 		bad:
 		BIO_printf(bio_err, "Usage pkcs8 [options]\n");
 		BIO_printf(bio_err, "where options are\n");
@@ -223,174 +182,147 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-nocrypt        use or expect unencrypted private key\n");
 		BIO_printf(bio_err, "-v2 alg         use PKCS#5 v2.0 and cipher \"alg\"\n");
 		BIO_printf(bio_err, "-v1 obj         use PKCS#5 v1.5 and cipher \"alg\"\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
-		goto end;
-		}
+		return (1);
+	}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
-	if (!app_passwd(bio_err, passargin, passargout, &passin, &passout))
-		{
+	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
-		goto end;
-		}
+		return (1);
+	}
 
-	if ((pbe_nid == -1) && !cipher)
-		pbe_nid = NID_pbeWithMD5AndDES_CBC;
+	if ((pbe_nid == -1) && !cipher) pbe_nid = NID_pbeWithMD5AndDES_CBC;
 
-	if (infile)
-		{
-		if (!(in = BIO_new_file(infile, "rb")))
-			{
+	if (infile) {
+		if (!(in = BIO_new_file(infile, "rb"))) {
 			BIO_printf(bio_err,
 				 "Can't open input file %s\n", infile);
-			goto end;
-			}
+			return (1);
 		}
-	else
-		in = BIO_new_fp (stdin, BIO_NOCLOSE);
+	} else in = BIO_new_fp (stdin, BIO_NOCLOSE);
 
-	if (outfile)
-		{
-		if (!(out = BIO_new_file (outfile, "wb")))
-			{
+	if (outfile) {
+		if (!(out = BIO_new_file (outfile, "wb"))) {
 			BIO_printf(bio_err,
 				 "Can't open output file %s\n", outfile);
-			goto end;
-			}
+			return (1);
 		}
-	else
-		{
+	} else {
 		out = BIO_new_fp (stdout, BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
-			{
+		{
 			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
 			out = BIO_push(tmpbio, out);
-			}
-#endif
 		}
+#endif
+	}
 	if (topk8)
 		{
+		BIO_free(in); /* Not needed in this section */
 		pkey = load_key(bio_err, infile, informat, 1,
 			passin, e, "key");
-		if (!pkey)
-			goto end;
-		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken)))
-			{
-			BIO_printf(bio_err, "Error converting key\n");
+		if (!pkey) {
+			return (1);
+		}
+		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken))) {
+			BIO_printf(bio_err, "Error converting key\n", outfile);
 			ERR_print_errors(bio_err);
-			goto end;
-			}
-		if (nocrypt)
-			{
-			if (outformat == FORMAT_PEM) 
+			return (1);
+		}
+		if(nocrypt) {
+			if(outformat == FORMAT_PEM) 
 				PEM_write_bio_PKCS8_PRIV_KEY_INFO(out, p8inf);
-			else if (outformat == FORMAT_ASN1)
+			else if(outformat == FORMAT_ASN1)
 				i2d_PKCS8_PRIV_KEY_INFO_bio(out, p8inf);
-			else
-				{
+			else {
 				BIO_printf(bio_err, "Bad format specified for key\n");
-				goto end;
-				}
+				return (1);
 			}
-		else
-			{
-			if (passout)
-				p8pass = passout;
-			else
-				{
+		} else {
+			if(passout) p8pass = passout;
+			else {
 				p8pass = pass;
 				if (EVP_read_pw_string(pass, sizeof pass, "Enter Encryption Password:", 1))
-					goto end;
-				}
+					return (1);
+			}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,
 					p8pass, strlen(p8pass),
-					NULL, 0, iter, p8inf)))
-				{
-				BIO_printf(bio_err, "Error encrypting key\n");
+					NULL, 0, iter, p8inf))) {
+				BIO_printf(bio_err, "Error encrypting key\n",
+								 outfile);
 				ERR_print_errors(bio_err);
-				goto end;
-				}
+				return (1);
+			}
 			app_RAND_write_file(NULL, bio_err);
-			if (outformat == FORMAT_PEM) 
+			if(outformat == FORMAT_PEM) 
 				PEM_write_bio_PKCS8(out, p8);
-			else if (outformat == FORMAT_ASN1)
+			else if(outformat == FORMAT_ASN1)
 				i2d_PKCS8_bio(out, p8);
-			else
-				{
+			else {
 				BIO_printf(bio_err, "Bad format specified for key\n");
-				goto end;
-				}
+				return (1);
 			}
-
-		ret = 0;
-		goto end;
+			X509_SIG_free(p8);
 		}
+		PKCS8_PRIV_KEY_INFO_free (p8inf);
+		EVP_PKEY_free(pkey);
+		BIO_free_all(out);
+		if(passin) OPENSSL_free(passin);
+		if(passout) OPENSSL_free(passout);
+		return (0);
+	}
 
-	if (nocrypt)
-		{
-		if (informat == FORMAT_PEM) 
+	if(nocrypt) {
+		if(informat == FORMAT_PEM) 
 			p8inf = PEM_read_bio_PKCS8_PRIV_KEY_INFO(in,NULL,NULL, NULL);
-		else if (informat == FORMAT_ASN1)
+		else if(informat == FORMAT_ASN1)
 			p8inf = d2i_PKCS8_PRIV_KEY_INFO_bio(in, NULL);
-		else
-			{
+		else {
 			BIO_printf(bio_err, "Bad format specified for key\n");
-			goto end;
-			}
+			return (1);
 		}
-	else
-		{
-		if (informat == FORMAT_PEM) 
+	} else {
+		if(informat == FORMAT_PEM) 
 			p8 = PEM_read_bio_PKCS8(in, NULL, NULL, NULL);
-		else if (informat == FORMAT_ASN1)
+		else if(informat == FORMAT_ASN1)
 			p8 = d2i_PKCS8_bio(in, NULL);
-		else
-			{
+		else {
 			BIO_printf(bio_err, "Bad format specified for key\n");
-			goto end;
-			}
+			return (1);
+		}
 
-		if (!p8)
-			{
-			BIO_printf (bio_err, "Error reading key\n");
+		if (!p8) {
+			BIO_printf (bio_err, "Error reading key\n", outfile);
 			ERR_print_errors(bio_err);
-			goto end;
-			}
-		if (passin)
-			p8pass = passin;
-		else
-			{
+			return (1);
+		}
+		if(passin) p8pass = passin;
+		else {
 			p8pass = pass;
 			EVP_read_pw_string(pass, sizeof pass, "Enter Password:", 0);
-			}
+		}
 		p8inf = PKCS8_decrypt(p8, p8pass, strlen(p8pass));
-		}
+		X509_SIG_free(p8);
+	}
 
-	if (!p8inf)
-		{
-		BIO_printf(bio_err, "Error decrypting key\n");
+	if (!p8inf) {
+		BIO_printf(bio_err, "Error decrypting key\n", outfile);
 		ERR_print_errors(bio_err);
-		goto end;
-		}
+		return (1);
+	}
 
-	if (!(pkey = EVP_PKCS82PKEY(p8inf)))
-		{
-		BIO_printf(bio_err, "Error converting key\n");
+	if (!(pkey = EVP_PKCS82PKEY(p8inf))) {
+		BIO_printf(bio_err, "Error converting key\n", outfile);
 		ERR_print_errors(bio_err);
-		goto end;
-		}
+		return (1);
+	}
 	
-	if (p8inf->broken)
-		{
+	if (p8inf->broken) {
 		BIO_printf(bio_err, "Warning: broken key encoding: ");
-		switch (p8inf->broken)
-			{
+		switch (p8inf->broken) {
 			case PKCS8_NO_OCTET:
 			BIO_printf(bio_err, "No Octet String in PrivateKey\n");
 			break;
@@ -403,37 +335,28 @@ int MAIN(int argc, char **argv)
 			BIO_printf(bio_err, "DSA public key include in PrivateKey\n");
 			break;
 
-			case PKCS8_NEG_PRIVKEY:
-			BIO_printf(bio_err, "DSA private key value is negative\n");
-			break;
-
 			default:
 			BIO_printf(bio_err, "Unknown broken type\n");
 			break;
 		}
 	}
 	
-	if (outformat == FORMAT_PEM) 
+	PKCS8_PRIV_KEY_INFO_free(p8inf);
+	if(outformat == FORMAT_PEM) 
 		PEM_write_bio_PrivateKey(out, pkey, NULL, NULL, 0, NULL, passout);
-	else if (outformat == FORMAT_ASN1)
+	else if(outformat == FORMAT_ASN1)
 		i2d_PrivateKey_bio(out, pkey);
-	else
-		{
+	else {
 		BIO_printf(bio_err, "Bad format specified for key\n");
-			goto end;
-		}
-	ret = 0;
+			return (1);
+	}
 
 	end:
-	X509_SIG_free(p8);
-	PKCS8_PRIV_KEY_INFO_free(p8inf);
 	EVP_PKEY_free(pkey);
 	BIO_free_all(out);
 	BIO_free(in);
-	if (passin)
-		OPENSSL_free(passin);
-	if (passout)
-		OPENSSL_free(passout);
+	if(passin) OPENSSL_free(passin);
+	if(passout) OPENSSL_free(passout);
 
-	return ret;
-	}
+	return (0);
+}

apps/pkey.c

@@ -1,284 +0,0 @@
-/* apps/pkey.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
- * project 2006
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <stdio.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/pem.h>
-#include <openssl/err.h>
-#include <openssl/evp.h>
-
-#define PROG pkey_main
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-	{
-	ENGINE *e = NULL;
-	char **args, *infile = NULL, *outfile = NULL;
-	char *passargin = NULL, *passargout = NULL;
-	BIO *in = NULL, *out = NULL;
-	const EVP_CIPHER *cipher = NULL;
-	int informat, outformat;
-	int pubin = 0, pubout = 0, pubtext = 0, text = 0, noout = 0;
-	EVP_PKEY *pkey=NULL;
-	char *passin = NULL, *passout = NULL;
-	int badarg = 0;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine=NULL;
-#endif
-	int ret = 1;
-
-	if (bio_err == NULL)
-		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	informat=FORMAT_PEM;
-	outformat=FORMAT_PEM;
-
-	ERR_load_crypto_strings();
-	OpenSSL_add_all_algorithms();
-	args = argv + 1;
-	while (!badarg && *args && *args[0] == '-')
-		{
-		if (!strcmp(*args,"-inform"))
-			{
-			if (args[1])
-				{
-				args++;
-				informat=str2fmt(*args);
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp(*args,"-outform"))
-			{
-			if (args[1])
-				{
-				args++;
-				outformat=str2fmt(*args);
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp(*args,"-passin"))
-			{
-			if (!args[1]) goto bad;
-			passargin= *(++args);
-			}
-		else if (!strcmp(*args,"-passout"))
-			{
-			if (!args[1]) goto bad;
-			passargout= *(++args);
-			}
-#ifndef OPENSSL_NO_ENGINE
-		else if (strcmp(*args,"-engine") == 0)
-			{
-			if (!args[1]) goto bad;
-			engine= *(++args);
-			}
-#endif
-		else if (!strcmp (*args, "-in"))
-			{
-			if (args[1])
-				{
-				args++;
-				infile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp (*args, "-out"))
-			{
-			if (args[1])
-				{
-				args++;
-				outfile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (strcmp(*args,"-pubin") == 0)
-			{
-			pubin=1;
-			pubout=1;
-			pubtext=1;
-			}
-		else if (strcmp(*args,"-pubout") == 0)
-			pubout=1;
-		else if (strcmp(*args,"-text_pub") == 0)
-			{
-			pubtext=1;
-			text=1;
-			}
-		else if (strcmp(*args,"-text") == 0)
-			text=1;
-		else if (strcmp(*args,"-noout") == 0)
-			noout=1;
-		else
-			{
-			cipher = EVP_get_cipherbyname(*args + 1);
-			if (!cipher)
-				{
-				BIO_printf(bio_err, "Unknown cipher %s\n",
-								*args + 1);
-				badarg = 1;
-				}
-			}
-		args++;
-		}
-
-	if (badarg)
-		{
-		bad:
-		BIO_printf(bio_err, "Usage pkey [options]\n");
-		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, "-in file        input file\n");
-		BIO_printf(bio_err, "-inform X       input format (DER or PEM)\n");
-		BIO_printf(bio_err, "-passin arg     input file pass phrase source\n");
-		BIO_printf(bio_err, "-outform X      output format (DER or PEM)\n");
-		BIO_printf(bio_err, "-out file       output file\n");
-		BIO_printf(bio_err, "-passout arg    output file pass phrase source\n");
-#ifndef OPENSSL_NO_ENGINE
-		BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
-#endif
-		return 1;
-		}
-
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
-
-	if (!app_passwd(bio_err, passargin, passargout, &passin, &passout))
-		{
-		BIO_printf(bio_err, "Error getting passwords\n");
-		goto end;
-		}
-
-	if (outfile)
-		{
-		if (!(out = BIO_new_file (outfile, "wb")))
-			{
-			BIO_printf(bio_err,
-				 "Can't open output file %s\n", outfile);
-			goto end;
-			}
-		}
-	else
-		{
-		out = BIO_new_fp (stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
-		}
-
-	if (pubin)
-		pkey = load_pubkey(bio_err, infile, informat, 1,
-			passin, e, "Public Key");
-	else
-		pkey = load_key(bio_err, infile, informat, 1,
-			passin, e, "key");
-	if (!pkey)
-		goto end;
-
-	if (!noout)
-		{
-		if (outformat == FORMAT_PEM) 
-			{
-			if (pubout)
-				PEM_write_bio_PUBKEY(out,pkey);
-			else
-				PEM_write_bio_PrivateKey(out, pkey, cipher,
-							NULL, 0, NULL, passout);
-			}
-		else if (outformat == FORMAT_ASN1)
-			{
-			if (pubout)
-				i2d_PUBKEY_bio(out, pkey);
-			else
-				i2d_PrivateKey_bio(out, pkey);
-			}
-		else
-			{
-			BIO_printf(bio_err, "Bad format specified for key\n");
-			goto end;
-			}
-
-		}
-
-	if (text)
-		{
-		if (pubtext)
-			EVP_PKEY_print_public(out, pkey, 0, NULL);
-		else
-			EVP_PKEY_print_private(out, pkey, 0, NULL);
-		}
-
-	ret = 0;
-
-	end:
-	EVP_PKEY_free(pkey);
-	BIO_free_all(out);
-	BIO_free(in);
-	if (passin)
-		OPENSSL_free(passin);
-	if (passout)
-		OPENSSL_free(passout);
-
-	return ret;
-	}

apps/pkeyparam.c

@@ -1,200 +0,0 @@
-/* apps/pkeyparam.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
- * project 2006
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <stdio.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/pem.h>
-#include <openssl/err.h>
-#include <openssl/evp.h>
-
-#define PROG pkeyparam_main
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-	{
-	char **args, *infile = NULL, *outfile = NULL;
-	BIO *in = NULL, *out = NULL;
-	int text = 0, noout = 0;
-	EVP_PKEY *pkey=NULL;
-	int badarg = 0;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine=NULL;
-#endif
-	int ret = 1;
-
-	if (bio_err == NULL)
-		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	ERR_load_crypto_strings();
-	OpenSSL_add_all_algorithms();
-	args = argv + 1;
-	while (!badarg && *args && *args[0] == '-')
-		{
-		if (!strcmp (*args, "-in"))
-			{
-			if (args[1])
-				{
-				args++;
-				infile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp (*args, "-out"))
-			{
-			if (args[1])
-				{
-				args++;
-				outfile = *args;
-				}
-			else badarg = 1;
-			}
-#ifndef OPENSSL_NO_ENGINE
-		else if (strcmp(*args,"-engine") == 0)
-			{
-			if (!args[1]) goto bad;
-			engine= *(++args);
-			}
-#endif
-
-		else if (strcmp(*args,"-text") == 0)
-			text=1;
-		else if (strcmp(*args,"-noout") == 0)
-			noout=1;
-		args++;
-		}
-
-	if (badarg)
-		{
-#ifndef OPENSSL_NO_ENGINE
-		bad:
-#endif
-		BIO_printf(bio_err, "Usage pkeyparam [options]\n");
-		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, "-in file        input file\n");
-		BIO_printf(bio_err, "-out file       output file\n");
-		BIO_printf(bio_err, "-text           print parameters as text\n");
-		BIO_printf(bio_err, "-noout          don't output encoded parameters\n");
-#ifndef OPENSSL_NO_ENGINE
-		BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
-#endif
-		return 1;
-		}
-
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
-
-	if (infile)
-		{
-		if (!(in = BIO_new_file (infile, "r")))
-			{
-			BIO_printf(bio_err,
-				 "Can't open input file %s\n", infile);
-			goto end;
-			}
-		}
-	else
-		in = BIO_new_fp (stdin, BIO_NOCLOSE);
-
-	if (outfile)
-		{
-		if (!(out = BIO_new_file (outfile, "w")))
-			{
-			BIO_printf(bio_err,
-				 "Can't open output file %s\n", outfile);
-			goto end;
-			}
-		}
-	else
-		{
-		out = BIO_new_fp (stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
-		}
-
-	pkey = PEM_read_bio_Parameters(in, NULL);
-	if (!pkey)
-		{
-		BIO_printf(bio_err, "Error reading parameters\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (!noout)
-		PEM_write_bio_Parameters(out,pkey);
-
-	if (text)
-		EVP_PKEY_print_params(out, pkey, 0, NULL);
-
-	ret = 0;
-
-	end:
-	EVP_PKEY_free(pkey);
-	BIO_free_all(out);
-	BIO_free(in);
-
-	return ret;
-	}