The rest of the merge in of the main trunk, a few conflicts resolved.

symhacks.h.

.cvsignore

@@ -1,4 +1,4 @@
-openssl.pc
+Makefile.ssl
 MINFO
 makefile.one
 tmp
@@ -13,6 +13,3 @@ cctest.c
 cctest.a
 libcrypto.so.*
 libssl.so.*
-*.flc
-semantic.cache
-Makefile

ChangeLog.0_9_7-stable_not-in-head

@@ -1,163 +0,0 @@
-This file, together with ChangeLog.0_9_7-stable_not-in-head_FIPS,
-provides a collection of those CVS change log entries for the
-0.9.7 branch (OpenSSL_0_9_7-stable) that do not appear similarly in
-0.9.8-dev (CVS head).
-    
-ChangeLog.0_9_7-stable_not-in-head_FIPS  -  "FIPS" related changes
-ChangeLog.0_9_7-stable_not-in-head       -  everything else
-
-Some obvious false positives have been eliminated: e.g., we do not
-care about a simple "make update"; and we don't care about changes
-identified to the 0.9.7 branch that were explicitly identified as
-backports from head.
-    
-Eliminating all other entries (and finally this file and its
-compantion), either as false positives or as things that should go
-into 0.9.8, remains to be done.  Any additional changes to 0.9.7 that
-are not immediately put into 0.9.8, but belong there as well, should
-be added to the end of this file.
-
-
-2002-11-04 17:33  levitte
-
-	Changed:
-		Configure (1.314.2.38), "Exp", lines: +4 -2
-
-	Return my normal debug targets to something not so extreme, and
-	make the extreme ones special (or 'extreme', if you will :-)).
-
-2002-12-16 19:17  appro
-
-	Changed:
-		crypto/bn/bn_lcl.h (1.23.2.3), "Exp", lines: +3 -0
-		crypto/bn/bn_mul.c (1.28.2.4), "Exp", lines: +84 -445
-
-	This is rollback to 0.9.6h bn_mul.c to address problem reported in
-	RT#272.
-
-2003-07-27 15:46  ben
-
-	Changed:
-		crypto/aes/aes.h (1.1.2.5), "Exp", lines: +3 -0
-		crypto/aes/aes_cfb.c (1.1.2.4), "Exp", lines: +57 -0
-
-	Add untested CFB-r mode. Will be tested soon.
-
-2003-07-28 17:07  ben
-
-	Changed:
-		Makefile.org (1.154.2.69), "Exp", lines: +5 -1
-		crypto/aes/aes.h (1.1.2.6), "Exp", lines: +3 -0
-		crypto/aes/aes_cfb.c (1.1.2.5), "Exp", lines: +19 -0
-		crypto/dsa/Makefile.ssl (1.49.2.6), "Exp", lines: +3 -2
-		crypto/err/Makefile.ssl (1.48.2.4), "Exp", lines: +17 -16
-		crypto/evp/e_aes.c (1.6.2.5), "Exp", lines: +8 -0
-		crypto/evp/e_des.c (1.5.2.2), "Exp", lines: +1 -1
-		crypto/evp/e_des3.c (1.8.2.3), "Exp", lines: +2 -2
-		crypto/evp/evp.h (1.86.2.11), "Exp", lines: +28 -11
-		crypto/evp/evp_locl.h (1.7.2.3), "Exp", lines: +2 -2
-		crypto/objects/obj_dat.h (1.49.2.13), "Exp", lines: +10 -5
-		crypto/objects/obj_mac.h (1.19.2.13), "Exp", lines: +5 -0
-		crypto/objects/obj_mac.num (1.15.2.9), "Exp", lines: +1 -0
-		crypto/objects/objects.txt (1.20.2.14), "Exp", lines: +4 -0
-		fips/Makefile.ssl (1.1.2.3), "Exp", lines: +7 -0
-		fips/aes/Makefile.ssl (1.1.2.2), "Exp", lines: +23 -1
-		fips/aes/fips_aesavs.c (1.1.2.3), "Exp", lines: +9 -1
-		test/Makefile.ssl (1.84.2.30), "Exp", lines: +101 -43
-
-	Add support for partial CFB modes, make tests work, update
-	dependencies.
-
-2003-07-29 12:56  ben
-
-	Changed:
-		crypto/aes/aes_cfb.c (1.1.2.6), "Exp", lines: +9 -6
-		crypto/evp/c_allc.c (1.8.2.3), "Exp", lines: +1 -0
-		crypto/evp/evp_test.c (1.14.2.11), "Exp", lines: +17 -8
-		crypto/evp/evptests.txt (1.9.2.2), "Exp", lines: +48 -1
-
-	Working CFB1 and test vectors.
-
-2003-07-29 15:24  ben
-
-	Changed:
-		crypto/evp/e_aes.c (1.6.2.6), "Exp", lines: +14 -0
-		crypto/objects/obj_dat.h (1.49.2.14), "Exp", lines: +15 -5
-		crypto/objects/obj_mac.h (1.19.2.14), "Exp", lines: +10 -0
-		crypto/objects/obj_mac.num (1.15.2.10), "Exp", lines: +2 -0
-		crypto/objects/objects.txt (1.20.2.15), "Exp", lines: +2 -0
-		fips/aes/Makefile.ssl (1.1.2.3), "Exp", lines: +1 -1
-		fips/aes/fips_aesavs.c (1.1.2.4), "Exp", lines: +34 -19
-
-	The rest of the keysizes for CFB1, working AES AVS test for CFB1.
-
-2003-07-29 19:05  ben
-
-	Changed:
-		crypto/aes/aes.h (1.1.2.7), "Exp", lines: +3 -0
-		crypto/aes/aes_cfb.c (1.1.2.7), "Exp", lines: +14 -0
-		crypto/evp/c_allc.c (1.8.2.4), "Exp", lines: +1 -0
-		crypto/evp/e_aes.c (1.6.2.7), "Exp", lines: +4 -9
-		crypto/evp/evptests.txt (1.9.2.3), "Exp", lines: +48 -0
-		crypto/objects/obj_dat.h (1.49.2.15), "Exp", lines: +20 -5
-		crypto/objects/obj_mac.h (1.19.2.15), "Exp", lines: +15 -0
-		crypto/objects/obj_mac.num (1.15.2.11), "Exp", lines: +3 -0
-		crypto/objects/objects.txt (1.20.2.16), "Exp", lines: +3 -0
-		fips/aes/fips_aesavs.c (1.1.2.7), "Exp", lines: +11 -0
-
-	AES CFB8.
-
-2003-07-30 20:30  ben
-
-	Changed:
-		Makefile.org (1.154.2.70), "Exp", lines: +16 -5
-		crypto/des/cfb_enc.c (1.7.2.1), "Exp", lines: +2 -1
-		crypto/des/des_enc.c (1.11.2.2), "Exp", lines: +4 -0
-		crypto/evp/e_aes.c (1.6.2.8), "Exp", lines: +7 -14
-		crypto/evp/e_des.c (1.5.2.3), "Exp", lines: +37 -1
-		crypto/evp/evp.h (1.86.2.12), "Exp", lines: +6 -0
-		crypto/evp/evp_locl.h (1.7.2.4), "Exp", lines: +9 -0
-		crypto/objects/obj_dat.h (1.49.2.16), "Exp", lines: +48 -23
-		crypto/objects/obj_mac.h (1.19.2.16), "Exp", lines: +31 -6
-		crypto/objects/obj_mac.num (1.15.2.12), "Exp", lines: +5 -0
-		crypto/objects/objects.txt (1.20.2.17), "Exp", lines: +12 -6
-		fips/Makefile.ssl (1.1.2.4), "Exp", lines: +8 -1
-		fips/fips_make_sha1 (1.1.2.3), "Exp", lines: +3 -0
-		fips/aes/Makefile.ssl (1.1.2.4), "Exp", lines: +1 -1
-		fips/des/.cvsignore (1.1.2.1), "Exp", lines: +3 -0
-		fips/des/Makefile.ssl (1.1.2.1), "Exp", lines: +96 -0
-		fips/des/fingerprint.sha1 (1.1.2.1), "Exp", lines: +2 -0
-		fips/des/fips_des_enc.c (1.1.2.1), "Exp", lines: +288 -0
-		fips/des/fips_des_locl.h (1.1.2.1), "Exp", lines: +428 -0
-		fips/des/fips_desmovs.c (1.1.2.1), "Exp", lines: +659 -0
-
-	Whoops, forgot FIPS DES, also add EVPs for DES CFB1 and 8.
-
-2003-08-01 12:25  ben
-
-	Changed:
-		crypto/des/cfb_enc.c (1.7.2.2), "Exp", lines: +45 -36
-		crypto/evp/c_allc.c (1.8.2.5), "Exp", lines: +2 -0
-		crypto/evp/e_des.c (1.5.2.4), "Exp", lines: +8 -3
-		crypto/evp/evptests.txt (1.9.2.4), "Exp", lines: +6 -0
-
-	Fix DES CFB-r.
-
-2003-08-01 12:31  ben
-
-	Changed:
-		crypto/evp/evptests.txt (1.9.2.5), "Exp", lines: +4 -0
-
-	DES CFB8 test.
-
-2005-04-19 16:21  appro
-
-	Changed:
-		Configure (1.314.2.117), "Exp", lines: +24 -21
-		Makefile.org (1.154.2.100), "Exp", lines: +1 -11
-		TABLE (1.99.2.52), "Exp", lines: +20 -20
-		apps/Makefile (1.1.4.15), "Exp", lines: +1 -1
-		test/Makefile (1.1.4.12), "Exp", lines: +1 -1
-
-	Enable shared link on HP-UX.
-

FAQ

@@ -1,25 +1,20 @@
 OpenSSL  -  Frequently Asked Questions
 --------------------------------------
 
-[MISC] Miscellaneous questions
-
 * Which is the current version of OpenSSL?
 * Where is the documentation?
 * How can I contact the OpenSSL developers?
-* Where can I get a compiled version of OpenSSL?
-* Why aren't tools like 'autoconf' and 'libtool' used?
-* What is an 'engine' version?
-* How do I check the authenticity of the OpenSSL distribution?
-
-[LEGAL] Legal questions
-
 * Do I need patent licenses to use OpenSSL?
-* Can I use OpenSSL with GPL software? 
-
-[USER] Questions on using the OpenSSL applications
-
+* Is OpenSSL thread-safe?
 * Why do I get a "PRNG not seeded" error message?
-* Why do I get an "unable to write 'random state'" error message?
+* Why does the linker complain about undefined symbols?
+* Where can I get a compiled version of OpenSSL?
+* I've compiled a program under Windows and it crashes: why?
+* How do I read or write a DER encoded buffer using the ASN1 functions?
+* I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
+* I've called <some function> and it fails, why?
+* I just get a load of numbers for the error output, what do they mean?
+* Why do I get errors about unknown algorithms?
 * How do I create certificates or certificate requests?
 * Why can't I create certificate requests?
 * Why does <SSL program> fail with a certificate verify error?
@@ -27,54 +22,17 @@ OpenSSL  -  Frequently Asked Questions
 * How can I create DSA certificates?
 * Why can't I make an SSL connection using a DSA certificate?
 * How can I remove the passphrase on a private key?
-* Why can't I use OpenSSL certificates with SSL client authentication?
-* Why does my browser give a warning about a mismatched hostname?
-* How do I install a CA certificate into a browser?
-* Why is OpenSSL x509 DN output not conformant to RFC2253?
-* What is a "128 bit certificate"? Can I create one with OpenSSL?
-
-[BUILD] Questions about building and testing OpenSSL
-
-* Why does the linker complain about undefined symbols?
+* Why can't the OpenSSH configure script detect OpenSSL?
 * Why does the OpenSSL test fail with "bc: command not found"?
 * Why does the OpenSSL test fail with "bc: 1 no implemented"?
-* Why does the OpenSSL test fail with "bc: stack empty"?
-* Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
+* Why does the OpenSSL compilation fail on Alpha True64 Unix?
 * Why does the OpenSSL compilation fail with "ar: command not found"?
-* Why does the OpenSSL compilation fail on Win32 with VC++?
-* What is special about OpenSSL on Redhat?
-* Why does the OpenSSL compilation fail on MacOS X?
-* Why does the OpenSSL test suite fail on MacOS X?
-* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
-* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
-* Why does the OpenSSL test suite fail in sha512t on x86 CPU?
-* Why does compiler fail to compile sha512.c?
-* Test suite still fails, what to do?
 
-[PROG] Questions about programming with OpenSSL
-
-* Is OpenSSL thread-safe?
-* I've compiled a program under Windows and it crashes: why?
-* How do I read or write a DER encoded buffer using the ASN1 functions?
-* OpenSSL uses DER but I need BER format: does OpenSSL support BER?
-* I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
-* I've called <some function> and it fails, why?
-* I just get a load of numbers for the error output, what do they mean?
-* Why do I get errors about unknown algorithms?
-* Why can't the OpenSSH configure script detect OpenSSL?
-* Can I use OpenSSL's SSL library with non-blocking I/O?
-* Why doesn't my server application receive a client certificate?
-* Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
-* I think I've detected a memory leak, is this a bug?
-
-===============================================================================
-
-[MISC] ========================================================================
 
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.8e was released on February 23rd, 2007.
+OpenSSL 0.9.5a was released on April 1st, 2000.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -120,50 +78,6 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 <URL: http://www.openssl.org>.
 
 
-* Where can I get a compiled version of OpenSSL?
-
-You can finder pointers to binary distributions in
-http://www.openssl.org/related/binaries.html .
-
-Some applications that use OpenSSL are distributed in binary form.
-When using such an application, you don't need to install OpenSSL
-yourself; the application will include the required parts (e.g. DLLs).
-
-If you want to build OpenSSL on a Windows system and you don't have
-a C compiler, read the "Mingw32" section of INSTALL.W32 for information
-on how to obtain and install the free GNU C compiler.
-
-A number of Linux and *BSD distributions include OpenSSL.
-
-
-* Why aren't tools like 'autoconf' and 'libtool' used?
-
-autoconf will probably be used in future OpenSSL versions. If it was
-less Unix-centric, it might have been used much earlier.
-
-* What is an 'engine' version?
-
-With version 0.9.6 OpenSSL was extended to interface to external crypto
-hardware. This was realized in a special release '0.9.6-engine'. With
-version 0.9.7 the changes were merged into the main development line,
-so that the special release is no longer necessary.
-
-* How do I check the authenticity of the OpenSSL distribution?
-
-We provide MD5 digests and ASC signatures of each tarball.
-Use MD5 to check that a tarball from a mirror site is identical:
-
-   md5sum TARBALL | awk '{print $1;}' | cmp - TARBALL.md5
-
-You can check authenticity using pgp or gpg. You need the OpenSSL team
-member public key used to sign it (download it from a key server, see a
-list of keys at <URL: http://www.openssl.org/about/>). Then
-just do:
-
-   pgp TARBALL.asc
-
-[LEGAL] =======================================================================
-
 * Do I need patent licenses to use OpenSSL?
 
 The patents section of the README file lists patents that may apply to
@@ -171,101 +85,178 @@ you if you want to use OpenSSL.  For information on intellectual
 property rights, please consult a lawyer.  The OpenSSL team does not
 offer legal advice.
 
-You can configure OpenSSL so as not to use IDEA, MDC2 and RC5 by using
- ./config no-idea no-mdc2 no-rc5
+You can configure OpenSSL so as not to use RC5 and IDEA by using
+ ./config no-rc5 no-idea
 
 
-* Can I use OpenSSL with GPL software?
+* Is OpenSSL thread-safe?
 
-On many systems including the major Linux and BSD distributions, yes (the
-GPL does not place restrictions on using libraries that are part of the
-normal operating system distribution).
+Yes (with limitations: an SSL connection may not concurrently be used
+by multiple threads).  On Windows and many Unix systems, OpenSSL
+automatically uses the multi-threaded versions of the standard
+libraries.  If your platform is not one of these, consult the INSTALL
+file.
 
-On other systems, the situation is less clear. Some GPL software copyright
-holders claim that you infringe on their rights if you use OpenSSL with
-their software on operating systems that don't normally include OpenSSL.
+Multi-threaded applications must provide two callback functions to
+OpenSSL.  This is described in the threads(3) manpage.
 
-If you develop open source software that uses OpenSSL, you may find it
-useful to choose an other license than the GPL, or state explicitly that
-"This program is released under the GPL with the additional exemption that
-compiling, linking, and/or using OpenSSL is allowed."  If you are using
-GPL software developed by others, you may want to ask the copyright holder
-for permission to use their software with OpenSSL.
-
-
-[USER] ========================================================================
 
 * Why do I get a "PRNG not seeded" error message?
 
 Cryptographic software needs a source of unpredictable data to work
 correctly.  Many open source operating systems provide a "randomness
-device" (/dev/urandom or /dev/random) that serves this purpose.
-All OpenSSL versions try to use /dev/urandom by default; starting with
-version 0.9.7, OpenSSL also tries /dev/random if /dev/urandom is not
-available.
+device" that serves this purpose.  On other systems, applications have
+to call the RAND_add() or RAND_seed() function with appropriate data
+before generating keys or performing public key encryption.
 
-On other systems, applications have to call the RAND_add() or
-RAND_seed() function with appropriate data before generating keys or
-performing public key encryption. (These functions initialize the
-pseudo-random number generator, PRNG.)  Some broken applications do
-not do this.  As of version 0.9.5, the OpenSSL functions that need
-randomness report an error if the random number generator has not been
-seeded with at least 128 bits of randomness.  If this error occurs and
-is not discussed in the documentation of the application you are
-using, please contact the author of that application; it is likely
-that it never worked correctly.  OpenSSL 0.9.5 and later make the
-error visible by refusing to perform potentially insecure encryption.
+Some broken applications do not do this.  As of version 0.9.5, the
+OpenSSL functions that need randomness report an error if the random
+number generator has not been seeded with at least 128 bits of
+randomness.  If this error occurs, please contact the author of the
+application you are using.  It is likely that it never worked
+correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
+to perform potentially insecure encryption.
 
-If you are using Solaris 8, you can add /dev/urandom and /dev/random
-devices by installing patch 112438 (Sparc) or 112439 (x86), which are
-available via the Patchfinder at <URL: http://sunsolve.sun.com>
-(Solaris 9 includes these devices by default). For /dev/random support
-for earlier Solaris versions, see Sun's statement at
-<URL: http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski>
-(the SUNWski package is available in patch 105710).
+On systems without /dev/urandom, it is a good idea to use the Entropy
+Gathering Demon; see the RAND_egd() manpage for details.
 
-On systems without /dev/urandom and /dev/random, it is a good idea to
-use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
-details.  Starting with version 0.9.7, OpenSSL will automatically look
-for an EGD socket at /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool and
-/etc/entropy.
+Most components of the openssl command line tool try to use the
+file $HOME/.rnd (or $RANDFILE, if this environment variable is set)
+for seeding the PRNG.  If this file does not exist or is too short,
+the "PRNG not seeded" error message may occur.
 
-Most components of the openssl command line utility automatically try
-to seed the random number generator from a file.  The name of the
-default seeding file is determined as follows: If environment variable
-RANDFILE is set, then it names the seeding file.  Otherwise if
-environment variable HOME is set, then the seeding file is $HOME/.rnd.
-If neither RANDFILE nor HOME is set, versions up to OpenSSL 0.9.6 will
-use file .rnd in the current directory while OpenSSL 0.9.6a uses no
-default seeding file at all.  OpenSSL 0.9.6b and later will behave
-similarly to 0.9.6a, but will use a default of "C:\" for HOME on
-Windows systems if the environment variable has not been set.
+[Note to OpenSSL 0.9.5 users: The command "openssl rsa" in version
+0.9.5 does not do this and will fail on systems without /dev/urandom
+when trying to password-encrypt an RSA key!  This is a bug in the
+library; try a later version instead.]
 
-If the default seeding file does not exist or is too short, the "PRNG
-not seeded" error message may occur.
-
-The openssl command line utility will write back a new state to the
-default seeding file (and create this file if necessary) unless
-there was no sufficient seeding.
-
-Pointing $RANDFILE to an Entropy Gathering Daemon socket does not work.
-Use the "-rand" option of the OpenSSL command line tools instead.
-The $RANDFILE environment variable and $HOME/.rnd are only used by the
-OpenSSL command line tools. Applications using the OpenSSL library
-provide their own configuration options to specify the entropy source,
-please check out the documentation coming the with application.
+For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
+installing the SUNski package from Sun patch 105710-01 (Sparc) which
+adds a /dev/random device and make sure it gets used, usually through
+$RANDFILE.  There are probably similar patches for the other Solaris
+versions.  However, be warned that /dev/random is usually a blocking
+device, which may have som effects on OpenSSL.
 
 
-* Why do I get an "unable to write 'random state'" error message?
+* Why does the linker complain about undefined symbols?
+
+Maybe the compilation was interrupted, and make doesn't notice that
+something is missing.  Run "make clean; make".
+
+If you used ./Configure instead of ./config, make sure that you
+selected the right target.  File formats may differ slightly between
+OS versions (for example sparcv8/sparcv9, or a.out/elf).
+
+In case you get errors about the following symbols, use the config
+option "no-asm", as described in INSTALL:
+
+ BF_cbc_encrypt, BF_decrypt, BF_encrypt, CAST_cbc_encrypt,
+ CAST_decrypt, CAST_encrypt, RC4, RC5_32_cbc_encrypt, RC5_32_decrypt,
+ RC5_32_encrypt, bn_add_words, bn_div_words, bn_mul_add_words,
+ bn_mul_comba4, bn_mul_comba8, bn_mul_words, bn_sqr_comba4,
+ bn_sqr_comba8, bn_sqr_words, bn_sub_words, des_decrypt3,
+ des_ede3_cbc_encrypt, des_encrypt, des_encrypt2, des_encrypt3,
+ des_ncbc_encrypt, md5_block_asm_host_order, sha1_block_asm_data_order
+
+If none of these helps, you may want to try using the current snapshot.
+If the problem persists, please submit a bug report.
 
 
-Sometimes the openssl command line utility does not abort with
-a "PRNG not seeded" error message, but complains that it is
-"unable to write 'random state'".  This message refers to the
-default seeding file (see previous answer).  A possible reason
-is that no default filename is known because neither RANDFILE
-nor HOME is set.  (Versions up to 0.9.6 used file ".rnd" in the
-current directory in this case, but this has changed with 0.9.6a.)
+* Where can I get a compiled version of OpenSSL?
+
+Some applications that use OpenSSL are distributed in binary form.
+When using such an application, you don't need to install OpenSSL
+yourself; the application will include the required parts (e.g. DLLs).
+
+If you want to install OpenSSL on a Windows system and you don't have
+a C compiler, read the "Mingw32" section of INSTALL.W32 for information
+on how to obtain and install the free GNU C compiler.
+
+A number of Linux and *BSD distributions include OpenSSL.
+
+
+* I've compiled a program under Windows and it crashes: why?
+
+This is usually because you've missed the comment in INSTALL.W32. You
+must link with the multithreaded DLL version of the VC++ runtime library
+otherwise the conflict will cause a program to crash: typically on the
+first BIO related read or write operation.
+
+
+* How do I read or write a DER encoded buffer using the ASN1 functions?
+
+You have two options. You can either use a memory BIO in conjunction
+with the i2d_XXX_bio() or d2i_XXX_bio() functions or you can use the
+i2d_XXX(), d2i_XXX() functions directly. Since these are often the
+cause of grief here are some code fragments using PKCS7 as an example:
+
+unsigned char *buf, *p;
+int len;
+
+len = i2d_PKCS7(p7, NULL);
+buf = OPENSSL_Malloc(len); /* or Malloc, error checking omitted */
+p = buf;
+i2d_PKCS7(p7, &p);
+
+At this point buf contains the len bytes of the DER encoding of
+p7.
+
+The opposite assumes we already have len bytes in buf:
+
+unsigned char *p;
+p = buf;
+p7 = d2i_PKCS7(NULL, &p, len);
+
+At this point p7 contains a valid PKCS7 structure of NULL if an error
+occurred. If an error occurred ERR_print_errors(bio) should give more
+information.
+
+The reason for the temporary variable 'p' is that the ASN1 functions
+increment the passed pointer so it is ready to read or write the next
+structure. This is often a cause of problems: without the temporary
+variable the buffer pointer is changed to point just after the data
+that has been read or written. This may well be uninitialized data
+and attempts to free the buffer will have unpredictable results
+because it no longer points to the same address.
+
+
+* I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
+
+This usually happens when you try compiling something using the PKCS#12
+macros with a C++ compiler. There is hardly ever any need to use the
+PKCS#12 macros in a program, it is much easier to parse and create
+PKCS#12 files using the PKCS12_parse() and PKCS12_create() functions
+documented in doc/openssl.txt and with examples in demos/pkcs12. The
+'pkcs12' application has to use the macros because it prints out 
+debugging information.
+
+
+* I've called <some function> and it fails, why?
+
+Before submitting a report or asking in one of the mailing lists, you
+should try to determine the cause. In particular, you should call
+ERR_print_errors() or ERR_print_errors_fp() after the failed call
+and see if the message helps. Note that the problem may occur earlier
+than you think -- you should check for errors after every call where
+it is possible, otherwise the actual problem may be hidden because
+some OpenSSL functions clear the error state.
+
+
+* I just get a load of numbers for the error output, what do they mean?
+
+The actual format is described in the ERR_print_errors() manual page.
+You should call the function ERR_load_crypto_strings() before hand and
+the message will be output in text form. If you can't do this (for example
+it is a pre-compiled binary) you can use the errstr utility on the error
+code itself (the hex digits after the second colon).
+
+
+* Why do I get errors about unknown algorithms?
+
+This can happen under several circumstances such as reading in an
+encrypted private key or attempting to decrypt a PKCS#12 file. The cause
+is forgetting to load OpenSSL's table of algorithms with
+OpenSSL_add_all_algorithms(). See the manual page for more information.
 
 
 * How do I create certificates or certificate requests?
@@ -330,125 +321,45 @@ you do have to do this check the EXAMPLES sections of the rsa(1) and
 dsa(1) manual pages.
 
 
-* Why can't I use OpenSSL certificates with SSL client authentication?
+* Why can't the OpenSSH configure script detect OpenSSL?
 
-What will typically happen is that when a server requests authentication
-it will either not include your certificate or tell you that you have
-no client certificates (Netscape) or present you with an empty list box
-(MSIE). The reason for this is that when a server requests a client
-certificate it includes a list of CAs names which it will accept. Browsers
-will only let you select certificates from the list on the grounds that
-there is little point presenting a certificate which the server will
-reject.
+There is a problem with OpenSSH 1.2.2p1, in that the configure script
+can't find the installed OpenSSL libraries.  The problem is actually
+a small glitch that is easily solved with the following patch to be
+applied to the OpenSSH distribution:
 
-The solution is to add the relevant CA certificate to your servers "trusted
-CA list". How you do this depends on the server software in uses. You can
-print out the servers list of acceptable CAs using the OpenSSL s_client tool:
-
-openssl s_client -connect www.some.host:443 -prexit
-
-If your server only requests certificates on certain URLs then you may need
-to manually issue an HTTP GET command to get the list when s_client connects:
-
-GET /some/page/needing/a/certificate.html
-
-If your CA does not appear in the list then this confirms the problem.
-
-
-* Why does my browser give a warning about a mismatched hostname?
-
-Browsers expect the server's hostname to match the value in the commonName
-(CN) field of the certificate. If it does not then you get a warning.
-
-
-* How do I install a CA certificate into a browser?
-
-The usual way is to send the DER encoded certificate to the browser as
-MIME type application/x-x509-ca-cert, for example by clicking on an appropriate
-link. On MSIE certain extensions such as .der or .cacert may also work, or you
-can import the certificate using the certificate import wizard.
-
-You can convert a certificate to DER form using the command:
-
-openssl x509 -in ca.pem -outform DER -out ca.der
-
-Occasionally someone suggests using a command such as:
-
-openssl pkcs12 -export -out cacert.p12 -in cacert.pem -inkey cakey.pem
-
-DO NOT DO THIS! This command will give away your CAs private key and
-reduces its security to zero: allowing anyone to forge certificates in
-whatever name they choose.
-
-* Why is OpenSSL x509 DN output not conformant to RFC2253?
-
-The ways to print out the oneline format of the DN (Distinguished Name) have
-been extended in version 0.9.7 of OpenSSL. Using the new X509_NAME_print_ex()
-interface, the "-nameopt" option could be introduded. See the manual
-page of the "openssl x509" commandline tool for details. The old behaviour
-has however been left as default for the sake of compatibility.
-
-* What is a "128 bit certificate"? Can I create one with OpenSSL?
-
-The term "128 bit certificate" is a highly misleading marketing term. It does
-*not* refer to the size of the public key in the certificate! A certificate
-containing a 128 bit RSA key would have negligible security.
-
-There were various other names such as "magic certificates", "SGC
-certificates", "step up certificates" etc.
-
-You can't generally create such a certificate using OpenSSL but there is no
-need to any more. Nowadays web browsers using unrestricted strong encryption
-are generally available.
-
-When there were tight export restrictions on the export of strong encryption
-software from the US only weak encryption algorithms could be freely exported
-(initially 40 bit and then 56 bit). It was widely recognised that this was
-inadequate. A relaxation the rules allowed the use of strong encryption but
-only to an authorised server.
-
-Two slighly different techniques were developed to support this, one used by
-Netscape was called "step up", the other used by MSIE was called "Server Gated
-Cryptography" (SGC). When a browser initially connected to a server it would
-check to see if the certificate contained certain extensions and was issued by
-an authorised authority. If these test succeeded it would reconnect using
-strong encryption.
-
-Only certain (initially one) certificate authorities could issue the
-certificates and they generally cost more than ordinary certificates.
-
-Although OpenSSL can create certificates containing the appropriate extensions
-the certificate would not come from a permitted authority and so would not
-be recognized.
-
-The export laws were later changed to allow almost unrestricted use of strong
-encryption so these certificates are now obsolete.
-
-
-[BUILD] =======================================================================
-
-* Why does the linker complain about undefined symbols?
-
-Maybe the compilation was interrupted, and make doesn't notice that
-something is missing.  Run "make clean; make".
-
-If you used ./Configure instead of ./config, make sure that you
-selected the right target.  File formats may differ slightly between
-OS versions (for example sparcv8/sparcv9, or a.out/elf).
-
-In case you get errors about the following symbols, use the config
-option "no-asm", as described in INSTALL:
-
- BF_cbc_encrypt, BF_decrypt, BF_encrypt, CAST_cbc_encrypt,
- CAST_decrypt, CAST_encrypt, RC4, RC5_32_cbc_encrypt, RC5_32_decrypt,
- RC5_32_encrypt, bn_add_words, bn_div_words, bn_mul_add_words,
- bn_mul_comba4, bn_mul_comba8, bn_mul_words, bn_sqr_comba4,
- bn_sqr_comba8, bn_sqr_words, bn_sub_words, des_decrypt3,
- des_ede3_cbc_encrypt, des_encrypt, des_encrypt2, des_encrypt3,
- des_ncbc_encrypt, md5_block_asm_host_order, sha1_block_asm_data_order
-
-If none of these helps, you may want to try using the current snapshot.
-If the problem persists, please submit a bug report.
+----- snip:start -----
+--- openssh-1.2.2p1/configure.in.orig	Thu Mar 23 18:56:58 2000
++++ openssh-1.2.2p1/configure.in	Thu Mar 23 18:55:05 2000
+@@ -152,10 +152,10 @@
+ AC_MSG_CHECKING([for OpenSSL/SSLeay directory])
+ for ssldir in "" $tryssldir /usr /usr/local/openssl /usr/lib/openssl /usr/local/ssl /usr/lib/ssl /usr/local /usr/pkg /opt /opt/openssl ; do
+ 	if test ! -z "$ssldir" ; then
+-		LIBS="$saved_LIBS -L$ssldir"
++		LIBS="$saved_LIBS -L$ssldir/lib"
+ 		CFLAGS="$CFLAGS -I$ssldir/include"
+ 		if test "x$need_dash_r" = "x1" ; then
+-			LIBS="$LIBS -R$ssldir"
++			LIBS="$LIBS -R$ssldir/lib"
+ 		fi
+ 	fi
+ 	LIBS="$LIBS -lcrypto"
+--- openssh-1.2.2p1/configure.orig	Thu Mar 23 18:55:02 2000
++++ openssh-1.2.2p1/configure	Thu Mar 23 18:57:08 2000
+@@ -1890,10 +1890,10 @@
+ echo "configure:1891: checking for OpenSSL/SSLeay directory" >&5
+ for ssldir in "" $tryssldir /usr /usr/local/openssl /usr/lib/openssl /usr/local/ssl /usr/lib/ssl /usr/local /usr/pkg /opt /opt/openssl ; do
+ 	if test ! -z "$ssldir" ; then
+-		LIBS="$saved_LIBS -L$ssldir"
++		LIBS="$saved_LIBS -L$ssldir/lib"
+ 		CFLAGS="$CFLAGS -I$ssldir/include"
+ 		if test "x$need_dash_r" = "x1" ; then
+-			LIBS="$LIBS -R$ssldir"
++			LIBS="$LIBS -R$ssldir/lib"
+ 		fi
+ 	fi
+ 	LIBS="$LIBS -lcrypto"
+----- snip:end -----
 
 
 * Why does the OpenSSL test fail with "bc: command not found"?
@@ -459,29 +370,17 @@ tests, get GNU bc from ftp://ftp.gnu.org or from your OS distributor.
 
 * Why does the OpenSSL test fail with "bc: 1 no implemented"?
 
-On some SCO installations or versions, bc has a bug that gets triggered
-when you run the test suite (using "make test").  The message returned is
-"bc: 1 not implemented".
-
-The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
-for download instructions) can be safely used, for example.
+On some SCO installations or versions, bc has a bug that gets triggered when
+you run the test suite (using "make test").  The message returned is "bc:
+1 not implemented".  The best way to deal with this is to find another
+implementation of bc and compile/install it.  For example, GNU bc (see
+http://www.gnu.org/software/software.html for download instructions) can
+be safely used.
 
 
-* Why does the OpenSSL test fail with "bc: stack empty"?
+* Why does the OpenSSL compilation fail on Alpha True64 Unix?
 
-On some DG/ux versions, bc seems to have a too small stack for calculations
-that the OpenSSL bntest throws at it.  This gets triggered when you run the
-test suite (using "make test").  The message returned is "bc: stack empty".
-
-The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
-for download instructions) can be safely used, for example.
-
-
-* Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
-
-On some Alpha installations running Tru64 Unix and Compaq C, the compilation
+On some Alpha installations running True64 Unix and Compaq C, the compilation
 of crypto/sha/sha_dgst.c fails with the message 'Fatal:  Insufficient virtual
 memory to continue compilation.'  As far as the tests have shown, this may be
 a compiler bug.  What happens is that it eats up a lot of resident memory
@@ -514,10 +413,6 @@ This will only compile sha_dgst.c with -O0, the rest with the optimization
 level chosen by the configuration process.  When the above is done, do the
 test and installation and you're set.
 
-3. Reconfigure the toolkit with no-sha0 option to leave out SHA0. It 
-should not be used and is not used in SSL/TLS nor any other recognized
-protocol in either case.
-
 
 * Why does the OpenSSL compilation fail with "ar: command not found"?
 
@@ -535,364 +430,3 @@ and then redo the compilation.  What you should really do is make sure
 '/usr/ccs/bin' is permanently in your $PATH, for example through your
 '.profile' (again, assuming you use a sh-compatible shell).
 
-
-* Why does the OpenSSL compilation fail on Win32 with VC++?
-
-Sometimes, you may get reports from VC++ command line (cl) that it
-can't find standard include files like stdio.h and other weirdnesses.
-One possible cause is that the environment isn't correctly set up.
-To solve that problem for VC++ versions up to 6, one should run
-VCVARS32.BAT which is found in the 'bin' subdirectory of the VC++
-installation directory (somewhere under 'Program Files').  For VC++
-version 7 (and up?), which is also called VS.NET, the file is called
-VSVARS32.BAT instead.
-This needs to be done prior to running NMAKE, and the changes are only
-valid for the current DOS session.
-
-
-* What is special about OpenSSL on Redhat?
-
-Red Hat Linux (release 7.0 and later) include a preinstalled limited
-version of OpenSSL. For patent reasons, support for IDEA, RC5 and MDC2
-is disabled in this version. The same may apply to other Linux distributions.
-Users may therefore wish to install more or all of the features left out.
-
-To do this you MUST ensure that you do not overwrite the openssl that is in
-/usr/bin on your Red Hat machine. Several packages depend on this file,
-including sendmail and ssh. /usr/local/bin is a good alternative choice. The
-libraries that come with Red Hat 7.0 onwards have different names and so are
-not affected. (eg For Red Hat 7.2 they are /lib/libssl.so.0.9.6b and
-/lib/libcrypto.so.0.9.6b with symlinks /lib/libssl.so.2 and
-/lib/libcrypto.so.2 respectively).
-
-Please note that we have been advised by Red Hat attempting to recompile the
-openssl rpm with all the cryptography enabled will not work. All other
-packages depend on the original Red Hat supplied openssl package. It is also
-worth noting that due to the way Red Hat supplies its packages, updates to
-openssl on each distribution never change the package version, only the
-build number. For example, on Red Hat 7.1, the latest openssl package has
-version number 0.9.6 and build number 9 even though it contains all the
-relevant updates in packages up to and including 0.9.6b.
-
-A possible way around this is to persuade Red Hat to produce a non-US
-version of Red Hat Linux.
-
-FYI: Patent numbers and expiry dates of US patents:
-MDC-2: 4,908,861 13/03/2007
-IDEA:  5,214,703 25/05/2010
-RC5:   5,724,428 03/03/2015
-
-
-* Why does the OpenSSL compilation fail on MacOS X?
-
-If the failure happens when trying to build the "openssl" binary, with
-a large number of undefined symbols, it's very probable that you have
-OpenSSL 0.9.6b delivered with the operating system (you can find out by
-running '/usr/bin/openssl version') and that you were trying to build
-OpenSSL 0.9.7 or newer.  The problem is that the loader ('ld') in
-MacOS X has a misfeature that's quite difficult to go around.
-Look in the file PROBLEMS for a more detailed explanation and for possible
-solutions.
-
-
-* Why does the OpenSSL test suite fail on MacOS X?
-
-If the failure happens when running 'make test' and the RC4 test fails,
-it's very probable that you have OpenSSL 0.9.6b delivered with the
-operating system (you can find out by running '/usr/bin/openssl version')
-and that you were trying to build OpenSSL 0.9.6d.  The problem is that
-the loader ('ld') in MacOS X has a misfeature that's quite difficult to
-go around and has linked the programs "openssl" and the test programs
-with /usr/lib/libcrypto.dylib and /usr/lib/libssl.dylib instead of the
-libraries you just built.
-Look in the file PROBLEMS for a more detailed explanation and for possible
-solutions.
-
-* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
-
-Failure in BN_sqr test is most likely caused by a failure to configure the
-toolkit for current platform or lack of support for the platform in question.
-Run './config -t' and './apps/openssl version -p'. Do these platform
-identifiers match? If they don't, then you most likely failed to run
-./config and you're hereby advised to do so before filing a bug report.
-If ./config itself fails to run, then it's most likely problem with your
-local environment and you should turn to your system administrator (or
-similar). If identifiers match (and/or no alternative identifier is
-suggested by ./config script), then the platform is unsupported. There might
-or might not be a workaround. Most notably on SPARC64 platforms with GNU
-C compiler you should be able to produce a working build by running
-'./config -m32'. I understand that -m32 might not be what you want/need,
-but the build should be operational. For further details turn to
-<openssl-dev@openssl.org>.
-
-* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
-
-As of 0.9.7 assembler routines were overhauled for position independence
-of the machine code, which is essential for shared library support. For
-some reason OpenBSD is equipped with an out-of-date GNU assembler which
-finds the new code offensive. To work around the problem, configure with
-no-asm (and sacrifice a great deal of performance) or patch your assembler
-according to <URL: http://www.openssl.org/~appro/gas-1.92.3.OpenBSD.patch>.
-For your convenience a pre-compiled replacement binary is provided at
-<URL: http://www.openssl.org/~appro/gas-1.92.3.static.aout.bin>.
-Reportedly elder *BSD a.out platforms also suffer from this problem and
-remedy should be same. Provided binary is statically linked and should be
-working across wider range of *BSD branches, not just OpenBSD.
-
-* Why does the OpenSSL test suite fail in sha512t on x86 CPU?
-
-If the test program in question fails withs SIGILL, Illegal Instruction
-exception, then you more than likely to run SSE2-capable CPU, such as
-Intel P4, under control of kernel which does not support SSE2
-instruction extentions. See accompanying INSTALL file and
-OPENSSL_ia32cap(3) documentation page for further information.
-
-* Why does compiler fail to compile sha512.c?
-
-OpenSSL SHA-512 implementation depends on compiler support for 64-bit
-integer type. Few elder compilers [ULTRIX cc, SCO compiler to mention a
-couple] lack support for this and therefore are incapable of compiling
-the module in question. The recommendation is to disable SHA-512 by
-adding no-sha512 to ./config [or ./Configure] command line. Another
-possible alternative might be to switch to GCC.
-
-* Test suite still fails, what to do?
-
-Another common reason for failure to complete some particular test is
-simply bad code generated by a buggy component in toolchain or deficiency
-in run-time environment. There are few cases documented in PROBLEMS file,
-consult it for possible workaround before you beat the drum. Even if you
-don't find solution or even mention there, do reserve for possibility of
-a compiler bug. Compiler bugs might appear in rather bizarre ways, they
-never make sense, and tend to emerge when you least expect them. In order
-to identify one, drop optimization level, e.g. by editing CFLAG line in
-top-level Makefile, recompile and re-run the test.
-
-[PROG] ========================================================================
-
-* Is OpenSSL thread-safe?
-
-Yes (with limitations: an SSL connection may not concurrently be used
-by multiple threads).  On Windows and many Unix systems, OpenSSL
-automatically uses the multi-threaded versions of the standard
-libraries.  If your platform is not one of these, consult the INSTALL
-file.
-
-Multi-threaded applications must provide two callback functions to
-OpenSSL by calling CRYPTO_set_locking_callback() and
-CRYPTO_set_id_callback().  This is described in the threads(3)
-manpage.
-
-* I've compiled a program under Windows and it crashes: why?
-
-This is usually because you've missed the comment in INSTALL.W32.
-Your application must link against the same version of the Win32
-C-Runtime against which your openssl libraries were linked.  The
-default version for OpenSSL is /MD - "Multithreaded DLL".
-
-If you are using Microsoft Visual C++'s IDE (Visual Studio), in
-many cases, your new project most likely defaulted to "Debug
-Singlethreaded" - /ML.  This is NOT interchangeable with /MD and your
-program will crash, typically on the first BIO related read or write
-operation.
-
-For each of the six possible link stage configurations within Win32,
-your application must link  against the same by which OpenSSL was
-built.  If you are using MS Visual C++ (Studio) this can be changed
-by:
-
- 1. Select Settings... from the Project Menu.
- 2. Select the C/C++ Tab.
- 3. Select "Code Generation from the "Category" drop down list box
- 4. Select the Appropriate library (see table below) from the "Use
-    run-time library" drop down list box.  Perform this step for both
-    your debug and release versions of your application (look at the
-    top left of the settings panel to change between the two)
-
-    Single Threaded           /ML        -  MS VC++ often defaults to
-                                            this for the release
-                                            version of a new project.
-    Debug Single Threaded     /MLd       -  MS VC++ often defaults to
-                                            this for the debug version
-                                            of a new project.
-    Multithreaded             /MT
-    Debug Multithreaded       /MTd
-    Multithreaded DLL         /MD        -  OpenSSL defaults to this.
-    Debug Multithreaded DLL   /MDd
-
-Note that debug and release libraries are NOT interchangeable.  If you
-built OpenSSL with /MD your application must use /MD and cannot use /MDd.
-
-As per 0.9.8 the above limitation is eliminated for .DLLs. OpenSSL
-.DLLs compiled with some specific run-time option [we insist on the
-default /MD] can be deployed with application compiled with different
-option or even different compiler. But there is a catch! Instead of
-re-compiling OpenSSL toolkit, as you would have to with prior versions,
-you have to compile small C snippet with compiler and/or options of
-your choice. The snippet gets installed as
-<install-root>/include/openssl/applink.c and should be either added to
-your application project or simply #include-d in one [and only one]
-of your application source files. Failure to link this shim module
-into your application manifests itself as fatal "no OPENSSL_Applink"
-run-time error. An explicit reminder is due that in this situation
-[mixing compiler options] it is as important to add CRYPTO_malloc_init
-prior first call to OpenSSL.
-
-* How do I read or write a DER encoded buffer using the ASN1 functions?
-
-You have two options. You can either use a memory BIO in conjunction
-with the i2d_*_bio() or d2i_*_bio() functions or you can use the
-i2d_*(), d2i_*() functions directly. Since these are often the
-cause of grief here are some code fragments using PKCS7 as an example:
-
- unsigned char *buf, *p;
- int len;
-
- len = i2d_PKCS7(p7, NULL);
- buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */
- p = buf;
- i2d_PKCS7(p7, &p);
-
-At this point buf contains the len bytes of the DER encoding of
-p7.
-
-The opposite assumes we already have len bytes in buf:
-
- unsigned char *p;
- p = buf;
- p7 = d2i_PKCS7(NULL, &p, len);
-
-At this point p7 contains a valid PKCS7 structure of NULL if an error
-occurred. If an error occurred ERR_print_errors(bio) should give more
-information.
-
-The reason for the temporary variable 'p' is that the ASN1 functions
-increment the passed pointer so it is ready to read or write the next
-structure. This is often a cause of problems: without the temporary
-variable the buffer pointer is changed to point just after the data
-that has been read or written. This may well be uninitialized data
-and attempts to free the buffer will have unpredictable results
-because it no longer points to the same address.
-
-
-* OpenSSL uses DER but I need BER format: does OpenSSL support BER?
-
-The short answer is yes, because DER is a special case of BER and OpenSSL
-ASN1 decoders can process BER.
-
-The longer answer is that ASN1 structures can be encoded in a number of
-different ways. One set of ways is the Basic Encoding Rules (BER) with various
-permissible encodings. A restriction of BER is the Distinguished Encoding
-Rules (DER): these uniquely specify how a given structure is encoded.
-
-Therefore, because DER is a special case of BER, DER is an acceptable encoding
-for BER.
-
-
-* I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
-
-This usually happens when you try compiling something using the PKCS#12
-macros with a C++ compiler. There is hardly ever any need to use the
-PKCS#12 macros in a program, it is much easier to parse and create
-PKCS#12 files using the PKCS12_parse() and PKCS12_create() functions
-documented in doc/openssl.txt and with examples in demos/pkcs12. The
-'pkcs12' application has to use the macros because it prints out 
-debugging information.
-
-
-* I've called <some function> and it fails, why?
-
-Before submitting a report or asking in one of the mailing lists, you
-should try to determine the cause. In particular, you should call
-ERR_print_errors() or ERR_print_errors_fp() after the failed call
-and see if the message helps. Note that the problem may occur earlier
-than you think -- you should check for errors after every call where
-it is possible, otherwise the actual problem may be hidden because
-some OpenSSL functions clear the error state.
-
-
-* I just get a load of numbers for the error output, what do they mean?
-
-The actual format is described in the ERR_print_errors() manual page.
-You should call the function ERR_load_crypto_strings() before hand and
-the message will be output in text form. If you can't do this (for example
-it is a pre-compiled binary) you can use the errstr utility on the error
-code itself (the hex digits after the second colon).
-
-
-* Why do I get errors about unknown algorithms?
-
-This can happen under several circumstances such as reading in an
-encrypted private key or attempting to decrypt a PKCS#12 file. The cause
-is forgetting to load OpenSSL's table of algorithms with
-OpenSSL_add_all_algorithms(). See the manual page for more information.
-
-
-* Why can't the OpenSSH configure script detect OpenSSL?
-
-Several reasons for problems with the automatic detection exist.
-OpenSSH requires at least version 0.9.5a of the OpenSSL libraries.
-Sometimes the distribution has installed an older version in the system
-locations that is detected instead of a new one installed. The OpenSSL
-library might have been compiled for another CPU or another mode (32/64 bits).
-Permissions might be wrong.
-
-The general answer is to check the config.log file generated when running
-the OpenSSH configure script. It should contain the detailed information
-on why the OpenSSL library was not detected or considered incompatible.
-
-
-* Can I use OpenSSL's SSL library with non-blocking I/O?
-
-Yes; make sure to read the SSL_get_error(3) manual page!
-
-A pitfall to avoid: Don't assume that SSL_read() will just read from
-the underlying transport or that SSL_write() will just write to it --
-it is also possible that SSL_write() cannot do any useful work until
-there is data to read, or that SSL_read() cannot do anything until it
-is possible to send data.  One reason for this is that the peer may
-request a new TLS/SSL handshake at any time during the protocol,
-requiring a bi-directional message exchange; both SSL_read() and
-SSL_write() will try to continue any pending handshake.
-
-
-* Why doesn't my server application receive a client certificate?
-
-Due to the TLS protocol definition, a client will only send a certificate,
-if explicitly asked by the server. Use the SSL_VERIFY_PEER flag of the
-SSL_CTX_set_verify() function to enable the use of client certificates.
-
-
-* Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
-
-For OpenSSL 0.9.7 the OID table was extended and corrected. In earlier
-versions, uniqueIdentifier was incorrectly used for X.509 certificates.
-The correct name according to RFC2256 (LDAP) is x500UniqueIdentifier.
-Change your code to use the new name when compiling against OpenSSL 0.9.7.
-
-
-* I think I've detected a memory leak, is this a bug?
-
-In most cases the cause of an apparent memory leak is an OpenSSL internal table
-that is allocated when an application starts up. Since such tables do not grow
-in size over time they are harmless.
-
-These internal tables can be freed up when an application closes using various
-functions.  Currently these include following:
-
-Thread-local cleanup functions:
-
-  ERR_remove_state()
-
-Application-global cleanup functions that are aware of usage (and therefore
-thread-safe):
-
-  ENGINE_cleanup() and CONF_modules_unload()
-
-"Brutal" (thread-unsafe) Application-global cleanup functions:
-
-  ERR_free_strings(), EVP_cleanup() and CRYPTO_cleanup_all_ex_data().
-
-
-===============================================================================
-

INSTALL

@@ -2,20 +2,13 @@
  INSTALLATION ON THE UNIX PLATFORM
  ---------------------------------
 
- [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X)
-  and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS,
-  INSTALL.MacOS and INSTALL.NW.
-  
-  This document describes installation on operating systems in the Unix
-  family.]
+ [Installation on Windows, OpenVMS and MacOS (before MacOS X) is described
+  in INSTALL.W32, INSTALL.VMS and INSTALL.MacOS.]
 
  To install OpenSSL, you will need:
 
-  * make
   * Perl 5
   * an ANSI C compiler
-  * a development environment in form of development libraries and C
-    header files
   * a supported Unix operating system
 
  Quick Start
@@ -50,6 +43,9 @@
   --openssldir=DIR Directory for OpenSSL files. If no prefix is specified,
                 the library files and binaries are also installed there.
 
+  rsaref        Build with RSADSI's RSAREF toolkit (this assumes that
+                librsaref.a is in the library search path).
+
   no-threads    Don't try to build with support for multi-threaded
                 applications.
 
@@ -57,48 +53,26 @@
                 This will usually require additional system-dependent options!
                 See "Note on multi-threading" below.
 
-  no-zlib       Don't try to build with support for zlib compression and
-                decompression.
-
-  zlib          Build with support for zlib compression/decompression.
-
-  zlib-dynamic  Like "zlib", but has OpenSSL load the zlib library dynamically
-                when needed.  This is only supported on systems where loading
-                of shared libraries is supported.  This is the default choice.
-
   no-shared     Don't try to create shared libraries.
 
   shared        In addition to the usual static libraries, create shared
                 libraries on platforms where it's supported.  See "Note on
-                shared libraries" below.
+                shared libraries" below.  THIS IS NOT RECOMMENDED!  Since
+                this is a development branch, the positions of the ENGINE
+                symbols in the transfer vector are constantly moving, so
+                binary backward compatibility can't be guaranteed in any way.
 
   no-asm        Do not use assembler code.
 
   386           Use the 80386 instruction set only (the default x86 code is
-                more efficient, but requires at least a 486). Note: Use
-                compiler flags for any other CPU specific configuration,
-                e.g. "-m32" to build x86 code on an x64 system.
-
-  no-sse2	Exclude SSE2 code pathes. Normally SSE2 extention is
-		detected at run-time, but the decision whether or not the
-		machine code will be executed is taken solely on CPU
-		capability vector. This means that if you happen to run OS
-		kernel which does not support SSE2 extension on Intel P4
-		processor, then your application might be exposed to
-		"illegal instruction" exception. There might be a way
-		to enable support in kernel, e.g. FreeBSD kernel can be
-		compiled with CPU_ENABLE_SSE, and there is a way to
-		disengage SSE2 code pathes upon application start-up,
-		but if you aim for wider "audience" running such kernel,
-		consider no-sse2. Both 386 and no-asm options above imply
-		no-sse2.
+                more efficient, but requires at least a 486).
 
   no-<cipher>   Build without the specified cipher (bf, cast, des, dh, dsa,
                 hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha).
                 The crypto/<cipher> directory can be removed after running
                 "make depend".
 
-  -Dxxx, -lxxx, -Lxxx, -fxxx, -mxxx, -Kxxx These system specific options will
+  -Dxxx, -lxxx, -Lxxx, -fxxx, -Kxxx These system specific options will
                 be passed through to the compiler to allow you to
                 define preprocessor symbols, specify additional libraries,
                 library directories or other compiler options.
@@ -154,14 +128,11 @@
      directory, and the binary will be in the "apps" directory.
 
      If "make" fails, look at the output.  There may be reasons for
-     the failure that aren't problems in OpenSSL itself (like missing
+     the failure that isn't a problem in OpenSSL itself (like missing
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
-     message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/support/rt2.html and will be forwarded to a
-     public mailing list). Include the output of "make report" in your message.
-     Please check out the request tracker. Maybe the bug was already
-     reported or has already been fixed.
+     message will be forwarded to a public mailing list).  Include the
+     output of "make report" in your message.
 
      [If you encounter assembler error messages, try the "no-asm"
      configuration option as an immediate fix.]
@@ -176,11 +147,10 @@
      If a test fails, look at the output.  There may be reasons for
      the failure that isn't a problem in OpenSSL itself (like a missing
      or malfunctioning bc).  If it is a problem with OpenSSL itself,
-     try removing any compiler optimization flags from the CFLAG line
+     try removing any compiler optimization flags from the CFLAGS line
      in Makefile.ssl and run "make clean; make". Please send a bug
      report to <openssl-bugs@openssl.org>, including the output of
-     "make report" in order to be added to the request tracker at
-     http://www.openssl.org/support/rt2.html.
+     "make report".
 
   4. If everything tests ok, install OpenSSL with
 
@@ -302,11 +272,6 @@
  Note on shared libraries
  ------------------------
 
- Shared libraries have certain caveats.  Binary backward compatibility
- can't be guaranteed before OpenSSL version 1.0.  The only reason to
- use them would be to conserve memory on systems where several programs
- are using OpenSSL.
-
  For some systems, the OpenSSL Configure script knows what is needed to
  build shared libraries for libcrypto and libssl.  On these systems,
  the shared libraries are currently not created by default, but giving
@@ -314,37 +279,3 @@
  targets for shared library creation, like linux-shared.  Those targets
  can currently be used on their own just as well, but this is expected
  to change in future versions of OpenSSL.
-
- Note on random number generation
- --------------------------------
-
- Availability of cryptographically secure random numbers is required for
- secret key generation. OpenSSL provides several options to seed the
- internal PRNG. If not properly seeded, the internal PRNG will refuse
- to deliver random bytes and a "PRNG not seeded error" will occur.
- On systems without /dev/urandom (or similar) device, it may be necessary
- to install additional support software to obtain random seed.
- Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
- and the FAQ for more information.
-
- Note on support for multiple builds
- -----------------------------------
-
- OpenSSL is usually built in its source tree.  Unfortunately, this doesn't
- support building for multiple platforms from the same source tree very well.
- It is however possible to build in a separate tree through the use of lots
- of symbolic links, which should be prepared like this:
-
-	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
-	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
-	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
-		mkdir -p `dirname $F`
-		rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
-		echo $F '->' $OPENSSL_SOURCE/$F
-	done
-	make -f Makefile.org clean
-
- OPENSSL_SOURCE is an environment variable that contains the absolute (this
- is important!) path to the OpenSSL source tree.
-
- Also, operations like 'make update' should still be made in the source tree.

INSTALL.DJGPP

@@ -1,47 +0,0 @@
-
- 
- INSTALLATION ON THE DOS PLATFORM WITH DJGPP
- -------------------------------------------
-
- OpenSSL has been ported to DJGPP, a Unix look-alike 32-bit run-time
- environment for 16-bit DOS, but only with long filename support.
- If you wish to compile on native DOS with 8+3 filenames, you will
- have to tweak the installation yourself, including renaming files
- with illegal or duplicate names.
-
- You should have a full DJGPP environment installed, including the
- latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
- requires that PERL and BC also be installed.
-
- All of these can be obtained from the usual DJGPP mirror sites or
- directly at "http://www.delorie.com/pub/djgpp". For help on which
- files to download, see the DJGPP "ZIP PICKER" page at
- "http://www.delorie.com/djgpp/zip-picker.html". You also need to have
- the WATT-32 networking package installed before you try to compile
- OpenSSL. This can be obtained from "http://www.bgnett.no/~giva/".
- The Makefile assumes that the WATT-32 code is in the directory
- specified by the environment variable WATT_ROOT. If you have watt-32
- in directory "watt32" under your main DJGPP directory, specify
- WATT_ROOT="/dev/env/DJDIR/watt32".
-
- To compile OpenSSL, start your BASH shell, then configure for DJGPP by
- running "./Configure" with appropriate arguments:
-
-	./Configure no-threads --prefix=/dev/env/DJDIR DJGPP
- 
- And finally fire up "make". You may run out of DPMI selectors when
- running in a DOS box under Windows. If so, just close the BASH
- shell, go back to Windows, and restart BASH. Then run "make" again.
-
- RUN-TIME CAVEAT LECTOR
- --------------
-
- Quoting FAQ:
-
-  "Cryptographic software needs a source of unpredictable data to work
-   correctly.  Many open source operating systems provide a "randomness
-   device" (/dev/urandom or /dev/random) that serves this purpose."
-
- As of version 0.9.7f DJGPP port checks upon /dev/urandom$ for a 3rd
- party "randomness" DOS driver. One such driver, NOISE.SYS, can be
- obtained from "http://www.rahul.net/dkaufman/index.html".

INSTALL.MacOS

@@ -1,7 +1,7 @@
-OpenSSL - Port To The Macintosh OS 9 or Earlier
-===============================================
+OpenSSL - Port To The Macintosh
+===============================
 
-Thanks to Roy Wood <roy@centricsystems.ca> initial support for Mac OS (pre
+Thanks to Roy Wood <roy@centricsystems.ca> initial support for MacOS (pre
 X) is now provided. "Initial" means that unlike other platforms where you
 get an SDK and a "swiss army" openssl application, on Macintosh you only
 get one sample application which fetches a page over HTTPS(*) and dumps it
@@ -32,17 +32,17 @@ Installation procedure:
         to 42, change appropriately.
 (**)	If you use SUNtar, then it might have already unbinhexed the files
 	in question.
-(***)	The project file was saved with CW Pro 5.3. If you have an earlier
+(***)	The project file was saved with CW Pro 5.3. If you have earlier
 	version and it refuses to open it, then download
 	http://www.openssl.org/~appro/OpenSSL.mcp.xml and import it
 	overwriting the original OpenSSL.mcp.
-(****)	Other targets are works in progress. If you feel like giving 'em a
+(****)	Other targets are work in progress. If you feel like giving 'em a
 	shot, then you should know that OpenSSL* and Lib* targets are
 	supposed to be built with the GUSI, MacOS library which mimics
 	BSD sockets and some other POSIX APIs. The GUSI distribution is
-	expected to be found in the same directory as the openssl source tree,
-	i.e., in the parent directory to the one where this very file,
-	namely INSTALL.MacOS, resides. For more information about GUSI, see
+	expected to be found in the same directory as openssl source tree,
+	i.e. in the parent directory to the one where this very file,
+	namely INSTALL.MacOS. For more informations about GUSI, see
 	http://www.iis.ee.ethz.ch/~neeri/macintosh/gusi-qa.html
 
 Finally some essential comments from our generous contributor:-)

INSTALL.NW

@@ -1,444 +0,0 @@
-
-INSTALLATION ON THE NETWARE PLATFORM
-------------------------------------
-
-Notes about building OpenSSL for NetWare.
-
-
-BUILD PLATFORM:
----------------
-The build scripts (batch files, perl scripts, etc) have been developed and
-tested on W2K.  The scripts should run fine on other Windows
-platforms (NT, Win9x, WinXP) but they haven't been tested.  They may require 
-some modifications.
-
-
-Supported NetWare Platforms - NetWare 5.x, NetWare 6.x:
-------------------------------------------
-OpenSSL uses the WinSock interfaces introduced in NetWare 5.  Therefore,
-previous versions of NetWare, 4.x and 3.x, are not supported.
-
-On NetWare there are two c-runtime libraries.  There is the legacy CLIB 
-interfaces and the newer LibC interfaces.  Being ANSI-C libraries, the 
-functionality in CLIB and LibC is similar but the LibC interfaces are built 
-using Novell Kernal Services (NKS) which is designed to leverage 
-multi-processor environments.
-
-The NetWare port of OpenSSL can configured to build using CLIB or LibC.  The 
-CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LibC 
-build was developed and tested using the NetWare 6.0 FCS.  
-
-The necessary LibC functionality ships with NetWare 6.  However, earlier 
-NetWare 5.x versions will require updates in order to run the OpenSSL LibC
-build.
-
-As of June 2005, the LibC build can be configured to use BSD sockets instead
-of WinSock sockets. Call Configure (usually through netware\build.bat) using
-a target of "netware-libc-bsdsock" instead of "netware-libc".
-
-
-REQUIRED TOOLS:
----------------
-Based upon the configuration and build options used, some or all of the
-following tools may be required:
-
-
-* Perl for Win32 - required (http://www.activestate.com/ActivePerl)
-   Used to run the various perl scripts on the build platform.
-
-
-* Perl 5.8.0 for NetWare v3.20 (or later) - required 
-   (http://developer.novell.com) Used to run the test script on NetWare 
-   after building.
-
-
-* Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare - required:
-   Provides command line tools used for building.
-
-   Tools:
-   mwccnlm.exe  - C/C++ Compiler for NetWare
-   mwldnlm.exe  - Linker for NetWare
-   mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
-
-
-* Assemblers - optional:
-   If you intend to build using the assembly options you will need an
-   assembler.  Work has been completed to support two assemblers, Metrowerks
-   and NASM.  However, during development, a bug was found in the Metrowerks
-   assembler which generates incorrect code.  Until this problem is fixed,
-   the Metrowerks assembler cannot be used.
-
-   mwasmnlm.exe - Metrowerks x86 assembler - part of CodeWarrior tools.
-         (version 2.2 Built Aug 23, 1999 - not useable due to code
-          generation bug)
-
-   nasmw.exe - Netwide Assembler NASM
-         version 0.98 was used in development and testing
-
-* Make Tool - required:
-   In order to build you will need a make tool.  Two make tools are
-   supported, GNU make (gmake.exe) or Microsoft nmake.exe.
-
-   gmake.exe - GNU make for Windows (version 3.75 used for development)
-         http://www.gnu.org/software/make/make.html
-
-   nmake.exe - Microsoft make (Version 6.00.8168.0 used for development)
-
-
-* Novell Developer Kit (NDK) - required: (http://developer.novell.com)
-
-   CLIB - BUILDS:
-
-      WinSock2 Developer Components for NetWare:
-         For initial development, the October 27, 2000 version was used.
-         However, future versions should also work.
-
-         NOTE:  The WinSock2 components include headers & import files for
-         NetWare, but you will also need the winsock2.h and supporting
-         headers (pshpack4.h, poppack.h, qos.h) delivered in the
-         Microsoft SDK.  Note: The winsock2.h support headers may change
-         with various versions of winsock2.h.  Check the dependencies
-         section on the NDK WinSock2 download page for the latest
-         information on dependencies. These components are unsupported by
-         Novell. They are provided as a courtesy, but it is strongly
-         suggested that all development be done using LIBC, not CLIB.
-
-         As of June 2005, the WinSock2 components are available at:
-         http://forgeftp.novell.com//ws2comp/
-
-
-      NLM and NetWare libraries for C (including CLIB and XPlat):
-         If you are going to build a CLIB version of OpenSSL, you will
-         need the CLIB headers and imports.  The March, 2001 NDK release or 
-         later is recommended.
-
-         Earlier versions should work but haven't been tested.  In recent
-         versions the import files have been consolidated and function
-         names moved.  This means you may run into link problems
-         (undefined symbols) when using earlier versions.   The functions
-         are available in earlier versions, but you will have to modifiy
-         the make files to include additional import files (see
-         openssl\util\pl\netware.pl).
-
-
-   LIBC - BUILDS:
-   
-      Libraries for C (LibC) - LibC headers and import files
-         If you are going to build a LibC version of OpenSSL, you will
-         need the LibC headers and imports.  The March 14, 2002 NDK release or
-         later is required.  
-         
-         NOTE: The LibC SDK includes the necessary WinSock2 support.  It
-         It is not necessary to download the WinSock2 Developer when building
-         for LibC. The LibC SDK also includes the appropriate BSD socket support
-         if configuring to use BSD sockets.
-
-
-BUILDING:
----------
-Before building, you will need to set a few environment variables.  You can
-set them manually or you can modify the "netware\set_env.bat" file.
-
-The set_env.bat file is a template you can use to set up the path
-and environment variables you will need to build.  Modify the
-various lines to point to YOUR tools and run set_env.bat.
-
-   netware\set_env.bat [target]
-
-      target        - "netware-clib" - CLib NetWare build
-                    - "netware-libc" - LibC NetWare build
-
-If you don't use set_env.bat, you will need to set up the following
-environment variables:
-
-   path - Set path to point to the tools you will use.
-
-   MWCIncludes - The location of the NDK include files.
-         
-            CLIB ex: set MWCIncludes=c:\ndk\nwsdk\include\nlm
-            LibC ex: set MWCIncludes=c:\ndk\libc\include
-
-   PRELUDE - The absolute path of the prelude object to link with.  For
-            a CLIB build it is recommended you use the "clibpre.o" files shipped
-            with the Metrowerks PDK for NetWare.  For a LibC build you should 
-            use the "libcpre.o" file delivered with the LibC NDK components.
-
-            CLIB ex: set PRELUDE=c:\ndk\nwsdk\imports\clibpre.o
-            LibC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
-
-   IMPORTS - The locaton of the NDK import files.
-
-            CLIB ex: set IMPORTS=c:\ndk\nwsdk\imports
-            LibC ex: set IMPORTS=c:\ndk\libc\imports
-
-
-In order to build, you need to run the Perl scripts to configure the build
-process and generate a make file.  There is a batch file,
-"netware\build.bat", to automate the process.
-
-Build.bat runs the build configuration scripts and generates a make file.
-If an assembly option is specified, it also runs the scripts to generate 
-the assembly code.  Always run build.bat from the "openssl" directory.
-
-   netware\build [target] [debug opts] [assembly opts] [configure opts]
-
-      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
-                    - "netware-libc" - LibC NetWare build (WinSock Sockets)
-                    - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
- 
-      debug opts    - "debug"  - build debug
-
-      assembly opts - "nw-mwasm" - use Metrowerks assembler
-                      "nw-nasm"  - use NASM assembler
-                      "no-asm"   - don't use assembly
-
-      configure opts- all unrecognized arguments are passed to the
-                      perl configure script
-
-   examples:
-
-      CLIB build, debug, without assembly:
-         netware\build.bat netware-clib debug no-asm
-
-      LibC build, non-debug, using NASM assembly:
-         netware\build.bat netware-libc nw-nasm
-
-      LibC build, BSD sockets, non-debug, without assembly:
-         netware\build.bat netware-libc-bsdsock no-asm
-
-Running build.bat generates a make file to be processed by your make 
-tool (gmake or nmake):
-
-   CLIB ex: gmake -f netware\nlm_clib_dbg.mak 
-   LibC ex: gmake -f netware\nlm_libc.mak 
-   LibC ex: gmake -f netware\nlm_libc_bsdsock.mak 
-
-
-You can also run the build scripts manually if you do not want to use the
-build.bat file.  Run the following scripts in the "\openssl"
-subdirectory (in the order listed below):
-
-   perl configure no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock]
-      configures no assembly build for specified netware environment
-      (CLIB or LibC).
-
-   perl util\mkfiles.pl >MINFO
-      generates a listing of source files (used by mk1mf)
-
-   perl util\mk1mf.pl no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock >netware\nlm.mak
-      generates the makefile for NetWare
-
-   gmake -f netware\nlm.mak
-      build with the make tool (nmake.exe also works)
-
-NOTE:  If you are building using the assembly option, you must also run the
-various Perl scripts to generate the assembly files.  See build.bat
-for an example of running the various assembly scripts.  You must use the
-"no-asm" option to build without assembly.  The configure and mk1mf scripts
-also have various other options.  See the scripts for more information.
-
-
-The output from the build is placed in the following directories:
-
-   CLIB Debug build:
-      out_nw_clib.dbg     - static libs & test nlm(s)
-      tmp_nw_clib.dbg     - temporary build files
-      outinc_nw_clib      - necessary include files
-
-   CLIB Non-debug build:
-      out_nw_clib         - static libs & test nlm(s)
-      tmp_nw_clib         - temporary build files
-      outinc_nw_clib      - necesary include files
-
-   LibC Debug build:
-      out_nw_libc.dbg     - static libs & test nlm(s)
-      tmp_nw_libc.dbg     - temporary build files
-      outinc_nw_libc      - necessary include files
-
-   LibC Non-debug build:
-      out_nw_libc         - static libs & test nlm(s)
-      tmp_nw_libc         - temporary build files
-      outinc_nw_libc      - necesary include files
-
-
-TESTING:
---------
-The build process creates the OpenSSL static libs ( crypto.lib, ssl.lib,
-rsaglue.lib ) and several test programs.  You should copy the test programs
-to your NetWare server and run the tests.
-
-The batch file "netware\cpy_tests.bat" will copy all the necessary files
-to your server for testing.  In order to run the batch file, you need a
-drive mapped to your target server.  It will create an "OpenSSL" directory
-on the drive and copy the test files to it.  CAUTION: If a directory with the
-name of "OpenSSL" already exists, it will be deleted.
-
-To run cpy_tests.bat:
-
-   netware\cpy_tests [output directory] [NetWare drive]
-
-      output directory - "out_nw_clib.dbg", "out_nw_libc", etc.
-      NetWare drive    - drive letter of mapped drive
-
-      CLIB ex: netware\cpy_tests out_nw_clib m:
-      LibC ex: netware\cpy_tests out_nw_libc m:
-
-
-The Perl script, "do_tests.pl", in the "OpenSSL" directory on the server
-should be used to execute the tests.  Before running the script, make sure
-your SEARCH PATH includes the "OpenSSL" directory.  For example, if you
-copied the files to the "sys:" volume you use the command:
-
-   SEARCH ADD SYS:\OPENSSL
-
-
-To run do_tests.pl type (at the console prompt):
-
-   perl \openssl\do_tests.pl [options]
-
-      options:
-         -p    - pause after executing each test
-
-The do_tests.pl script generates a log file "\openssl\test_out\tests.log"
-which should be reviewed for errors.  Any errors will be denoted by the word
-"ERROR" in the log.
-
-DEVELOPING WITH THE OPENSSL SDK:
---------------------------------
-Now that everything is built and tested, you are ready to use the OpenSSL
-libraries in your development.
-
-There is no real installation procedure, just copy the static libs and
-headers to your build location.  The libs (crypto.lib & ssl.lib) are
-located in the appropriate "out_nw_XXXX" directory 
-(out_nw_clib, out_nw_libc, etc).  
-
-The headers are located in the appropriate "outinc_nw_XXX" directory 
-(outinc_nw_clib, outinc_nw_libc).  
-
-One suggestion is to create the following directory 
-structure for the OpenSSL SDK:
-
-   \openssl
-      |- bin
-      |   |- openssl.nlm
-      |   |- (other tests you want)
-      |
-      |- lib
-      |   | - crypto.lib
-      |   | - ssl.lib
-      |
-      |- include
-      |   | - openssl
-      |   |    | - (all the headers in "outinc_nw\openssl")
-
-
-The program "openssl.nlm" can be very useful.  It has dozens of
-options and you may want to keep it handy for debugging, testing, etc.
-
-When building your apps using OpenSSL, define "NETWARE".  It is needed by
-some of the OpenSSL headers.  One way to do this is with a compile option,
-for example "-DNETWARE".
-
-
-
-NOTES:
-------
-
-Resource leaks in Tests
-------------------------
-Some OpenSSL tests do not clean up resources and NetWare reports
-the resource leaks when the tests unload.  If this really bugs you,
-you can stop the messages by setting the developer option off at the console
-prompt (set developer option = off).  Or better yet, fix the tests to
-clean up the resources!
-
-
-Multi-threaded Development
----------------------------
-The NetWare version of OpenSSL is thread-safe however, multi-threaded
-applications must provide the necessary locking function callbacks.  This
-is described in doc\threads.doc.  The file "openssl\crypto\threads\mttest.c"
-is a multi-threaded test program and demonstrates the locking functions.
-
-
-What is openssl2.nlm?
----------------------
-The openssl program has numerous options and can be used for many different
-things.  Many of the options operate in an interactive mode requiring the
-user to enter data.  Because of this, a default screen is created for the
-program.  However, when running the test script it is not desirable to
-have a seperate screen.  Therefore, the build also creates openssl2.nlm.
-Openssl2.nlm is functionally identical but uses the console screen.
-Openssl2 can be used when a non-interactive mode is desired.
-
-NOTE:  There are may other possibilities (command line options, etc)
-which could have been used to address the screen issue.  The openssl2.nlm
-option was chosen because it impacted only the build not the code.
-
-
-Why only static libraries?
---------------------------
-Globals, globals, and more globals.  The OpenSSL code uses many global
-variables that are allocated and initialized when used for the first time.
-
-On NetWare, most applications (at least historically) run in the kernel.
-When running in the kernel, there is one instance of global variables.
-For regular application type NLM(s) this isn't a problem because they are
-the only ones using the globals.  However, for a library NLM (an NLM which
-exposes functions and has no threads of execution), the globals cause
-problems.  Applications could inadvertently step on each other if they
-change some globals.  Even worse, the first application that triggers a
-global to be allocated and initialized has the allocated memory charged to
-itself.  Now when that application unloads, NetWare will clean up all the
-applicaton's memory.  The global pointer variables inside OpenSSL now
-point to freed memory.  An abend waiting to happen!
-
-To work correctly in the kernel, library NLM(s) that use globals need to
-provide a set of globals (instance data) for each application.  Another
-option is to require the library only be loaded in a protected address
-space along with the application using it.
-
-Modifying the OpenSSL code to provide a set of globals (instance data) for
-each application isn't technically difficult, but due to the large number
-globals it would require substantial code changes and it wasn't done.  Hence,
-the build currently only builds static libraries which are then linked
-into each application.
-
-NOTE:  If you are building a library NLM that uses the OpenSSL static
-libraries, you will still have to deal with the global variable issue.
-This is because when you link in the OpenSSL code you bring in all the
-globals.  One possible solution for the global pointer variables is to
-register memory functions with OpenSSL which allocate memory and charge it
-to your library NLM (see the function CRYPTO_set_mem_functions).  However,
-be aware that now all memory allocated by OpenSSL is charged to your NLM.
-
-
-CodeWarrior Tools and W2K
----------------------------
-There have been problems reported with the CodeWarrior Linker
-(mwldnlm.exe) in the PDK 2.1 for NetWare when running on Windows 2000.  The
-problems cause the link step to fail.  The only work around is to obtain an
-updated linker from Metrowerks.  It is expected Metrowerks will release
-PDK 3.0 (in beta testing at this time - May, 2001) in the near future which
-will fix these problems.
-
-
-Makefile "vclean"
-------------------
-The generated makefile has a "vclean" target which cleans up the build
-directories.  If you have been building successfully and suddenly
-experience problems, use "vclean" (gmake -f netware\nlm.mak vclean) and retry.
-
-
-"Undefined Symbol" Linker errors
---------------------------------
-There have been linker errors reported when doing a CLIB build.  The problems
-occur because some versions of the CLIB SDK import files inadvertently 
-left out some symbols.  One symbol in particular is "_lrotl".  The missing
-functions are actually delivered in the binaries, but they were left out of
-the import files.  The issues should be fixed in the September 2001 release 
-of the NDK.  If you experience the problems you can temporarily
-work around it by manually adding the missing symbols to your version of 
-"clib.imp".
-

INSTALL.OS2

@@ -1,31 +0,0 @@
- 
- Installation on OS/2
- --------------------
-
- You need to have the following tools installed:
-
-  * EMX GCC
-  * PERL
-  * GNU make
-
-
- To build the makefile, run
-
- > os2\os2-emx
-
- This will configure OpenSSL and create OS2-EMX.mak which you then use to 
- build the OpenSSL libraries & programs by running
-
- > make -f os2-emx.mak
-
- If that finishes successfully you will find the libraries and programs in the
- "out" directory.
-
- Alternatively, you can make a dynamic build that puts the library code into
- crypto.dll and ssl.dll by running
-
- > make -f os2-emx-dll.mak
-
- This will build the above mentioned dlls and a matching pair of import
- libraries in the "out_dll" directory along with the set of test programs
- and the openssl application.

INSTALL.VMS

@@ -8,7 +8,6 @@ Intro:
 
 This file is divided in the following parts:
 
-  Requirements			- Mandatory reading.
   Checking the distribution	- Mandatory reading.
   Compilation			- Mandatory reading.
   Logical names			- Mandatory reading.
@@ -20,24 +19,15 @@ This file is divided in the following parts:
   TODO				- Things that are to come.
 
 
-Requirements:
-=============
-
-To build and install OpenSSL, you will need:
-
- * DEC C or some other ANSI C compiler.  VAX C is *not* supported.
-   [Note: OpenSSL has only been tested with DEC C.  Compiling with 
-    a different ANSI C compiler may require some work]
-
 Checking the distribution:
 ==========================
 
 There have been reports of places where the distribution didn't quite get
-through, for example if you've copied the tree from a NFS-mounted Unix
+through, for example if you've copied the tree from a NFS-mounted unix
 mount point.
 
 The easiest way to check if everything got through as it should is to check
-for one of the following files:
+for oen of the following files:
 
 	[.CRYPTO]OPENSSLCONF.H_IN
 	[.CRYPTO]OPENSSLCONF_H.IN
@@ -69,7 +59,7 @@ for a command procedure name xxx-LIB.COM (in the library directories)
 or MAKExxx.COM (in the program directories) and read the comments at
 the top to understand how to use them.  However, if you want to
 compile all you can get, the simplest is to use MAKEVMS.COM in the top
-directory.  The syntax is the following:
+directory.  The syntax is trhe following:
 
   @MAKEVMS <option> <rsaref-p> <debug-p> [<compiler>]
 
@@ -79,7 +69,7 @@ directory.  The syntax is the following:
       CONFIG    Just build the "[.CRYPTO]OPENSSLCONF.H" file.
       BUILDINF  Just build the "[.INCLUDE]BUILDINF.H" file.
       SOFTLINKS Just copies some files, to simulate Unix soft links.
-      BUILDALL  Same as ALL, except CONFIG, BUILDINF and SOFTLINKS aren't done.
+      BUILDALL  Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
       RSAREF    Just build the "[.xxx.EXE.RSAREF]LIBRSAGLUE.OLB" library.
       CRYPTO    Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
       SSL       Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
@@ -92,7 +82,7 @@ directory.  The syntax is the following:
       RSAREF    compile using the RSAREF Library
       NORSAREF  compile without using RSAREF
 
-Note 0: The RSAREF library IS NO LONGER NEEDED.  The RSA patent
+Note 0: The RASREF library IS NO LONGER NEEDED.  The RSA patent
         expires September 20, 2000, and RSA Security chose to make
         the algorithm public domain two weeks before that.
 
@@ -264,7 +254,7 @@ following before you start compiling:
 The USER_CCDISABLEWARNINGS is there because otherwise, DEC C will complain
 that those macros have been changed.
 
-Note: Currently, this is only useful for library compilation.  The
+Note: Currently, this is only usefull for library compilation.  The
       programs will still be linked with the current version of the
       C library shareable image, and will thus complain if they are
       faced with an older version of the same C library shareable image.

INSTALL.W32

@@ -2,29 +2,16 @@
  INSTALLATION ON THE WIN32 PLATFORM
  ----------------------------------
 
- [Instructions for building for Windows CE can be found in INSTALL.WCE]
- [Instructions for building for Win64 can be found in INSTALL.W64]
-
- Heres a few comments about building OpenSSL in Windows environments.  Most
- of this is tested on Win32 but it may also work in Win 3.1 with some
+ Heres a few comments about building OpenSSL in Windows environments. Most of
+ this is tested on Win32 but it may also work in Win 3.1 with some
  modification.
 
- You need Perl for Win32.  Unless you will build on Cygwin, you will need
- ActiveState Perl, available from http://www.activestate.com/ActivePerl.
-
+ You need Perl for Win32 (available from http://www.activestate.com/ActivePerl)
  and one of the following C compilers:
 
   * Visual C++
   * Borland C
-  * GNU C (Cygwin or MinGW)
-
- If you are compiling from a tarball or a CVS snapshot then the Win32 files
- may well be not up to date. This may mean that some "tweaking" is required to
- get it all to work. See the trouble shooting section later on for if (when?)
- it goes wrong.
-
- Visual C++
- ----------
+  * GNU C (Mingw32 or Cygwin32)
 
  If you want to compile in the assembly language routines with Visual C++ then
  you will need an assembler. This is worth doing because it will result in
@@ -34,24 +21,29 @@
   * Microsoft MASM (aka "ml")
   * Free Netwide Assembler NASM.
 
- MASM is distributed with most versions of VC++. For the versions where it is
- not included in VC++, it is also distributed with some Microsoft DDKs, for
- example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
- either of these DDKs then you can just download the binaries for the Windows
- 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
- ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
- downloaded from the Microsoft developers site www.msdn.com.
+ MASM was at one point distributed with VC++. It is now distributed with some
+ Microsoft DDKs, for example the Windows NT 4.0 DDK and the Windows 98 DDK. If
+ you do not have either of these DDKs then you can just download the binaries
+ for the Windows 98 DDK and extract and rename the two files XXXXXml.exe and
+ XXXXXml.err, to ml.exe and ml.err and install somewhere on your PATH. Both
+ DDKs can be downloaded from the Microsoft developers site www.msdn.com.
 
  NASM is freely available. Version 0.98 was used during testing: other versions
  may also work. It is available from many places, see for example:
  http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
  The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
 
+ If you are compiling from a tarball or a CVS snapshot then the Win32 files
+ may well be not up to date. This may mean that some "tweaking" is required to
+ get it all to work. See the trouble shooting section later on for if (when?)
+ it goes wrong.
+
+ Visual C++
+ ----------
+
  Firstly you should run Configure:
 
- > perl Configure VC-WIN32 --prefix=c:/some/openssl/dir
-
-Where the prefix argument specifies where OpenSSL will be installed to.
+ > perl Configure VC-WIN32
 
  Next you need to build the Makefiles and optionally the assembly language
  files:
@@ -79,26 +71,15 @@ Where the prefix argument specifies where OpenSSL will be installed to.
  If all is well it should compile and you will have some DLLs and executables
  in out32dll. If you want to try the tests then do:
  
- > nmake -f ms\ntdll.mak test
-
-
-To install OpenSSL to the specified location do:
-
-> nmake -f ms\ntdll.mak install
+ > cd out32dll
+ > ..\ms\test
 
  Tweaks:
 
  There are various changes you can make to the Win32 compile environment. By
  default the library is not compiled with debugging symbols. If you add 'debug'
- to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
- compiled in. Note that mk1mf.pl expects the platform to be the last argument
- on the command line, so 'debug' must appear before that, as all other options.
-
-
- By default in 0.9.8 OpenSSL will compile builtin ENGINES into the libeay32.dll
- shared library. If you specify the "no-static-engine" option on the command
- line to Configure the shared library build (ms\ntdll.mak) will compile the
- engines as separate DLLs.
+ to the mk1mk.pl lines in the do_* batch file then debugging symbols will be
+ compiled in.
 
  The default Win32 environment is to leave out any Windows NT specific
  features.
@@ -110,20 +91,6 @@ To install OpenSSL to the specified location do:
  You can also build a static version of the library using the Makefile
  ms\nt.mak
 
-
-
- Borland C++ builder 5
- ---------------------
-
- * Configure for building with Borland Builder:
-   > perl Configure BC-32
-
- * Create the appropriate makefile
-   > ms\do_nasm
-
- * Build
-   > make -f ms\bcb.mak
-
  Borland C++ builder 3 and 4
  ---------------------------
 
@@ -134,72 +101,18 @@ To install OpenSSL to the specified location do:
  * Run make:
    > make -f bcb.mak
 
- GNU C (Cygwin)
- --------------
+ GNU C (Mingw32)
+ ---------------
 
- Cygwin provides a bash shell and GNU tools environment running
- on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
- Consequently, a make of OpenSSL with Cygwin is closer to a GNU
- bash environment such as Linux than to other the other Win32
- makes.
-
- Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
- It is also possible to create Win32 binaries that only use the
- Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
- MinGW. MinGW can be used in the Cygwin development environment
- or in a standalone setup as described in the following section.
-
- To build OpenSSL using Cygwin:
-
- * Install Cygwin (see http://cygwin.com/)
-
- * Install Perl and ensure it is in the path. Both Cygwin perl
-   (5.6.1-2 or newer) and ActivePerl work.
-
- * Run the Cygwin bash shell
-
- * $ tar zxvf openssl-x.x.x.tar.gz
-   $ cd openssl-x.x.x
-
-   To build the Cygwin version of OpenSSL:
-
-   $ ./config
-   [...]
-   $ make
-   [...]
-   $ make test
-   $ make install
-
-   This will create a default install in /usr/local/ssl.
-
-   To build the MinGW version (native Windows) in Cygwin:
-
-   $ ./Configure mingw
-   [...]
-   $ make
-   [...]
-   $ make test
-   $ make install
-
- Cygwin Notes:
-
- "make test" and normal file operations may fail in directories
- mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
- stripping of carriage returns. To avoid this ensure that a binary
- mount is used, e.g. mount -b c:\somewhere /home.
-
- "bc" is not provided in older Cygwin distribution.  This causes a
- non-fatal error in "make test" but is otherwise harmless.  If
- desired and needed, GNU bc can be built with Cygwin without change.
-
- GNU C (MinGW)
- -------------
+ To build OpenSSL, you need the Mingw32 package and GNU make.
 
  * Compiler installation:
 
-   MinGW is available from http://www.mingw.org. Run the installer and
-   set the MinGW bin directory to the PATH in "System Properties" or
-   autoexec.bat.
+   Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/
+   mingw32/egcs-1.1.2/egcs-1.1.2-mingw32.zip>. GNU make is at
+   <ftp://agnes.dida.physik.uni-essen.de/home/janjaap/mingw32/binaries/
+   make-3.76.1.zip>. Install both of them in C:\egcs-1.1.2 and run
+   C:\egcs-1.1.2\mingw32.bat to set the PATH.
 
  * Compile OpenSSL:
 
@@ -221,13 +134,57 @@ To install OpenSSL to the specified location do:
    > cd out
    > ..\ms\test
 
+ GNU C (CygWin32)
+ ---------------
+
+ CygWin32 provides a bash shell and GNU tools environment running on
+ NT 4.0, Windows 9x and Windows 2000. Consequently, a make of OpenSSL
+ with CygWin is closer to a GNU bash environment such as Linux rather
+ than other W32 makes that are based on a single makefile approach.
+ CygWin32 implements Posix/Unix calls through cygwin1.dll, and is
+ contrasted to Mingw32 which links dynamically to msvcrt.dll or
+ crtdll.dll.
+
+ To build OpenSSL using CygWin32:
+
+ * Install CygWin32 (see http://sourceware.cygnus.com/cygwin)
+
+ * Install Perl and ensure it is in the path
+
+ * Run the CygWin bash shell
+
+ * $ tar zxvf openssl-x.x.x.tar.gz
+   $ cd openssl-x.x.x
+   $ ./Configure no-threads CygWin32
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
+
+ This will create a default install in /usr/local/ssl.
+
+ CygWin32 Notes:
+
+ "make test" and normal file operations may fail in directories
+ mounted as text (i.e. mount -t c:\somewhere /home) due to CygWin
+ stripping of carriage returns. To avoid this ensure that a binary
+ mount is used, e.g. mount -b c:\somewhere /home.
+
+ As of version 1.1.1 CygWin32 is relatively unstable in its handling
+ of cr/lf issues. These make procedures succeeded with versions 1.1 and
+ the snapshot 20000524 (Slow!).
+
+ "bc" is not provided in the CygWin32 distribution.  This causes a
+ non-fatal error in "make test" but is otherwise harmless.  If
+ desired, GNU bc can be built with CygWin32 without change.
+
 
  Installation
  ------------
 
- If you used the Cygwin procedure above, you have already installed and
- can skip this section.  For all other procedures, there's currently no real
- installation procedure for Win32.  There are, however, some suggestions:
+ There's currently no real installation procedure for Win32.  There are,
+ however, some suggestions:
 
     - do nothing.  The include files are found in the inc32/ subdirectory,
       all binaries are found in out32dll/ or out32/ depending if you built
@@ -240,7 +197,7 @@ To install OpenSSL to the specified location do:
 	$ md c:\openssl\lib
 	$ md c:\openssl\include
 	$ md c:\openssl\include\openssl
-	$ copy /b inc32\openssl\*       c:\openssl\include\openssl
+	$ copy /b inc32\*               c:\openssl\include\openssl
 	$ copy /b out32dll\ssleay32.lib c:\openssl\lib
 	$ copy /b out32dll\libeay32.lib c:\openssl\lib
 	$ copy /b out32dll\ssleay32.dll c:\openssl\bin
@@ -299,23 +256,5 @@ To install OpenSSL to the specified location do:
  malloc(), free() and realloc() as the application.  However there are many
  standard library functions used by OpenSSL that call malloc() internally
  (e.g. fopen()), and OpenSSL cannot change these; so in general you cannot
- rely on CRYPTO_malloc_init() solving your problem, and you should
+ rely on CYRPTO_malloc_init() solving your problem, and you should
  consistently use the multithreaded library.
-
- Linking your application
- ------------------------
-
- If you link with static OpenSSL libraries [those built with ms/nt.mak],
- then you're expected to additionally link your application with
- WSOCK32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing
- non-interactive service applications might feel concerned about linking
- with latter two, as they are justly associated with interactive desktop,
- which is not available to service processes. The toolkit is designed
- to detect in which context it's currently executed, GUI, console app
- or service, and act accordingly, namely whether or not to actually make
- GUI calls.
-
- If you link with OpenSSL .DLLs, then you're expected to include into
- your application code small "shim" snippet, which provides glue between
- OpenSSL BIO layer and your compiler run-time. Look up OPENSSL_Applink
- reference page for further details.

INSTALL.W64

@@ -1,66 +0,0 @@
-
- INSTALLATION ON THE WIN64 PLATFORM
- ----------------------------------
-
- Caveat lector
- -------------
-
- As of moment of this writing Win64 support is classified "initial"
- for the following reasons.
-
- - No assembler modules are engaged upon initial 0.9.8 release.
- - API might change within 0.9.8 life-span, *but* in a manner which
-   doesn't break backward binary compatibility. Or in other words,
-   application programs compiled with initial 0.9.8 headers will
-   be expected to work with future minor release .DLL without need
-   to re-compile, even if future minor release features modified API.
- - Above mentioned API modifications have everything to do with
-   elimination of a number of limitations, which are normally
-   considered inherent to 32-bit platforms. Which in turn is why they
-   are treated as limitations on 64-bit platform such as Win64:-)
-   The current list comprises [but not necessarily limited to]:
-
-   - null-terminated strings may not be longer than 2G-1 bytes,
-     longer strings are treated as zero-length;
-   - dynamically and *internally* allocated chunks can't be larger
-     than 2G-1 bytes;
-   - inability to encrypt/decrypt chunks of data larger than 4GB
-     [it's possibly to *hash* chunks of arbitrary size through];
-
-   Neither of these is actually big deal and hardly encountered
-   in real-life applications.
-
- Compiling procedure
- -------------------
-
- You will need Perl. You can run under Cygwin or you can download
- ActiveState Perl from http://www.activestate.com/ActivePerl.
-
- You will need Microsoft Platform SDK, available for download at
- http://www.microsoft.com/msdownload/platformsdk/sdkupdate/. As per
- April 2005 Platform SDK is equipped with Win64 compilers, as well
- as assemblers, but it might change in the future.
-
- To build for Win64/x64:
-
- > perl Configure VC-WIN64A
- > ms\do_win64a
- > nmake -f ms\ntdll.mak
- > cd out32dll
- > ..\ms\test
-
- To build for Win64/IA64:
-
- > perl Configure VC-WIN64I
- > ms\do_win64i
- > nmake -f ms\ntdll.mak
- > cd out32dll
- > ..\ms\test
-
- Naturally test-suite itself has to be executed on the target platform.
-
- Installation
- ------------
-
- TBD, for now see INSTALL.W32.
-

INSTALL.WCE

@@ -1,74 +0,0 @@
- 
- INSTALLATION FOR THE WINDOWS CE PLATFORM
- ----------------------------------------
-
- Building OpenSSL for Windows CE requires the following external tools:
-
-  * Microsoft eMbedded Visual C++ 3.0
-  * wcecompat compatibility library (www.essemer.com.au)
-  * Optionally ceutils for running automated tests (www.essemer.com.au)
-
- You also need Perl for Win32.  You will need ActiveState Perl, available
- from http://www.activestate.com/ActivePerl.
-
- Windows CE support in OpenSSL relies on wcecompat and therefore it's
- appropriate to check http://www.essemer.com.au/windowsce/ for updates in
- case of compilation problems. As for the moment of this writing version
- 1.1 is available and actually required for WCE 4.2 and newer platforms.
- All Windows CE specific issues should be directed to www.essemer.com.au.
-
- The C Runtime Library implementation for Windows CE that is included with
- Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places
- incorrect.  wcecompat plugs the holes and tries to bring the Windows CE
- CRT to a level that is more compatible with ANSI C.  wcecompat goes further
- and provides low-level IO and stream IO support for stdin/stdout/stderr
- (which Windows CE does not provide).  This IO functionality is not needed
- by the OpenSSL library itself but is used for the tests and openssl.exe.
- More information is available at www.essemer.com.au.
-
- Building
- --------
-
- Setup the eMbedded Visual C++ environment.  There are batch files for doing
- this installed with eVC++.  For an ARM processor, for example, execute:
-
- > "C:\Program Files\Microsoft eMbedded Tools\EVC\WCE300\BIN\WCEARM.BAT"
-
- Next indicate where wcecompat is located:
-
- > set WCECOMPAT=C:\wcecompat
-
- Next you should run Configure:
-
- > perl Configure VC-CE
-
- Next you need to build the Makefiles:
-
- > ms\do_ms
-
- If you get errors about things not having numbers assigned then check the
- troubleshooting section in INSTALL.W32: you probably won't be able to compile
- it as it stands.
-
- Then from the VC++ environment at a prompt do:
-
- - to build static libraries:
-
-   > nmake -f ms\ce.mak
-
- - or to build DLLs:
-
-   > nmake -f ms\cedll.mak
-
- If all is well it should compile and you will have some static libraries and
- executables in out32, or some DLLs and executables in out32dll.  If you want
- to try the tests then make sure the ceutils are in the path and do:
- 
- > cd out32
- > ..\ms\testce
-
- This will copy each of the test programs to the Windows CE device and execute
- them, displaying the output of the tests on this computer.  The output should
- look similar to the output produced by running the tests for a regular Windows
- build.
-

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2007 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

MacOS/GetHTTPS.src/CPStringUtils.cpp

@@ -2750,4 +2750,4 @@ void SkipWhiteSpace(char **ioSrcCharPtr,const Boolean inStopAtEOL)
 			}
 		}
 	}
-}
+}

MacOS/GetHTTPS.src/ErrorHandling.cpp

@@ -167,4 +167,4 @@ void ThrowErrorMessageException(void)
 	ThrowDescriptiveException(gErrorMessage);
 }
 
-#endif
+#endif

MacOS/GetHTTPS.src/GetHTTPS.cpp

@@ -167,7 +167,7 @@ void main(void)
 		
 		tempString[bytesRead] = '\0';
 		
-		printf("%s", tempString);
+		printf(tempString);
 	}
 	
 	printf("\n\n\n");
@@ -201,7 +201,7 @@ EXITPOINT:
 	{
 		printf("An error occurred:\n");
 		
-		printf("%s",GetErrorMessage());
+		printf(GetErrorMessage());
 	}
 	
 	

MacOS/GetHTTPS.src/MacSocket.cpp

@@ -1287,7 +1287,7 @@ EXITPOINT:
 
 //	Send some bytes
 
-int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength)
+int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength)
 {
 OSErr			errCode = noErr;
 int				bytesSent = 0;
@@ -1604,4 +1604,4 @@ EPInfo* epi = (EPInfo*) context;
 		}
 	}
 }
-*/
+*/

MacOS/GetHTTPS.src/MacSocket.h

@@ -62,7 +62,7 @@ int MacSocket_recv(const int inSocketNum,void *outBuff,int outBuffLength,const B
 
 //	Call this to send data on a socket
 
-int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength);
+int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength);
 
 
 //	If zero bytes were read in a call to MacSocket_recv(), it may be that the remote end has done a half-close

Makefile.org

@@ -9,17 +9,11 @@ SHLIB_VERSION_NUMBER=
 SHLIB_VERSION_HISTORY=
 SHLIB_MAJOR=
 SHLIB_MINOR=
-SHLIB_EXT=
 PLATFORM=dist
 OPTIONS=
 CONFIGURE_ARGS=
 SHLIB_TARGET=
 
-# HERE indicates where this Makefile lives.  This can be used to indicate
-# where sub-Makefiles are expected to be.  Currently has very limited usage,
-# and should probably not be bothered with at all.
-HERE=.
-
 # INSTALL_PREFIX is for package builders so that they can configure
 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
 # Normally it is left empty.
@@ -29,6 +23,7 @@ INSTALLTOP=/usr/local/ssl
 # Do not edit this manually. Use Configure --openssldir=DIR do change this!
 OPENSSLDIR=/usr/local/ssl
 
+# RSAref  - Define if we are to link with RSAref.
 # NO_IDEA - Define to build without the IDEA algorithm
 # NO_RC4  - Define to build without the RC4 algorithm
 # NO_RC2  - Define to build without the RC2 algorithm
@@ -57,105 +52,127 @@ OPENSSLDIR=/usr/local/ssl
 # equal 4.
 # PKCS1_CHECK - pkcs1 tests.
 
-CC= cc
-CFLAG= -O
+CC= gcc
+#CFLAG= -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
+CFLAG= -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
 DEPFLAG= 
-PEX_LIBS= 
+PEX_LIBS= -L. -L.. -L../.. -L../../..
 EX_LIBS= 
-EXE_EXT= 
-ARFLAGS=
-AR=ar $(ARFLAGS) r
-ARD=ar $(ARFLAGS) d
+AR=ar r
 RANLIB= ranlib
 PERL= perl
 TAR= tar
-TARFLAGS= --no-recursion
-MAKEDEPPROG=makedepend
+TARFLAGS= --norecurse
 
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS=$(CC) -c
-ASFLAG=$(CFLAG)
+# Set BN_ASM to bn_asm.o if you want to use the C version
+BN_ASM= bn_asm.o
+#BN_ASM= bn_asm.o
+#BN_ASM= asm/bn86-elf.o	# elf, linux-elf
+#BN_ASM= asm/bn86-sol.o # solaris
+#BN_ASM= asm/bn86-out.o # a.out, FreeBSD
+#BN_ASM= asm/bn86bsdi.o # bsdi
+#BN_ASM= asm/alpha.o    # DEC Alpha
+#BN_ASM= asm/pa-risc2.o # HP-UX PA-RISC
+#BN_ASM= asm/r3000.o    # SGI MIPS cpu
+#BN_ASM= asm/sparc.o    # Sun solaris/SunOS
+#BN_ASM= asm/bn-win32.o # Windows 95/NT
+#BN_ASM= asm/x86w16.o   # 16 bit code for Windows 3.1/DOS
+#BN_ASM= asm/x86w32.o   # 32 bit code for Windows 3.1
 
 # For x86 assembler: Set PROCESSOR to 386 if you want to support
 # the 80386.
 PROCESSOR=
 
-# CPUID module collects small commonly used assembler snippets
-CPUID_OBJ= 
-BN_ASM= bn_asm.o
-DES_ENC= des_enc.o fcrypt_b.o
-AES_ASM_OBJ=aes_core.o aes_cbc.o
-BF_ENC= bf_enc.o
-CAST_ENC= c_enc.o
-RC4_ENC= rc4_enc.o
-RC5_ENC= rc5_enc.o
-MD5_ASM_OBJ= 
-SHA1_ASM_OBJ= 
-RMD160_ASM_OBJ= 
+# Set DES_ENC to des_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+DES_ENC= asm/dx86-out.o asm/yx86-out.o
+#DES_ENC= des_enc.o fcrypt_b.o          # C
+#DES_ENC= asm/dx86-elf.o asm/yx86-elf.o # elf
+#DES_ENC= asm/dx86-sol.o asm/yx86-sol.o # solaris
+#DES_ENC= asm/dx86-out.o asm/yx86-out.o # a.out, FreeBSD
+#DES_ENC= asm/dx86bsdi.o asm/yx86bsdi.o # bsdi
 
-# KRB5 stuff
-KRB5_INCLUDES=
-LIBKRB5=
+# Set BF_ENC to bf_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+BF_ENC= asm/bx86-out.o
+#BF_ENC= bf_enc.o
+#BF_ENC= asm/bx86-elf.o # elf
+#BF_ENC= asm/bx86-sol.o # solaris
+#BF_ENC= asm/bx86-out.o # a.out, FreeBSD
+#BF_ENC= asm/bx86bsdi.o # bsdi
 
-# Zlib stuff
-ZLIB_INCLUDE=
-LIBZLIB=
+# Set CAST_ENC to c_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+CAST_ENC= asm/cx86-out.o
+#CAST_ENC= c_enc.o
+#CAST_ENC= asm/cx86-elf.o # elf
+#CAST_ENC= asm/cx86-sol.o # solaris
+#CAST_ENC= asm/cx86-out.o # a.out, FreeBSD
+#CAST_ENC= asm/cx86bsdi.o # bsdi
 
-# This is the location of fipscanister.o and friends.
-# The FIPS module build will place it $(INSTALLTOP)/lib
-# but since $(INSTALLTOP) can only take the default value
-# when the module is built it will be in /usr/local/ssl/lib
-# $(INSTALLTOP) for this build make be different so hard
-# code the path.
+# Set RC4_ENC to rc4_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+RC4_ENC= asm/rx86-out.o
+#RC4_ENC= rc4_enc.o
+#RC4_ENC= asm/rx86-elf.o # elf
+#RC4_ENC= asm/rx86-sol.o # solaris
+#RC4_ENC= asm/rx86-out.o # a.out, FreeBSD
+#RC4_ENC= asm/rx86bsdi.o # bsdi
 
-FIPSLIBDIR=/usr/local/ssl/lib/
+# Set RC5_ENC to rc5_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+RC5_ENC= asm/r586-out.o
+#RC5_ENC= rc5_enc.o
+#RC5_ENC= asm/r586-elf.o # elf
+#RC5_ENC= asm/r586-sol.o # solaris
+#RC5_ENC= asm/r586-out.o # a.out, FreeBSD
+#RC5_ENC= asm/r586bsdi.o # bsdi
 
-# This is set to "y" if fipscanister.o is compiled internally as
-# opposed to coming from an external validated location.
+# Also need MD5_ASM defined
+MD5_ASM_OBJ= asm/mx86-out.o
+#MD5_ASM_OBJ= asm/mx86-elf.o        # elf
+#MD5_ASM_OBJ= asm/mx86-sol.o        # solaris
+#MD5_ASM_OBJ= asm/mx86-out.o        # a.out, FreeBSD
+#MD5_ASM_OBJ= asm/mx86bsdi.o        # bsdi
 
-FIPSCANISTERINTERNAL=n
+# Also need SHA1_ASM defined
+SHA1_ASM_OBJ= asm/sx86-out.o
+#SHA1_ASM_OBJ= asm/sx86-elf.o       # elf
+#SHA1_ASM_OBJ= asm/sx86-sol.o       # solaris
+#SHA1_ASM_OBJ= asm/sx86-out.o       # a.out, FreeBSD
+#SHA1_ASM_OBJ= asm/sx86bsdi.o       # bsdi
 
-# The location of the library which contains fipscanister.o
-# normally it will be libcrypto unless fipsdso is set in which
-# case it will be libfips. If not compiling in FIPS mode at all
-# this is empty making it a useful test for a FIPS compile.
+# Also need RMD160_ASM defined
+RMD160_ASM_OBJ= asm/rm86-out.o
+#RMD160_ASM_OBJ= asm/rm86-elf.o       # elf
+#RMD160_ASM_OBJ= asm/rm86-sol.o       # solaris
+#RMD160_ASM_OBJ= asm/rm86-out.o       # a.out, FreeBSD
+#RMD160_ASM_OBJ= asm/rm86bsdi.o       # bsdi
 
-FIPSCANLIB=
+# To do special treatment, use "directory names" starting with a period.
+# When we're prepared to use shared libraries in the programs we link here
+# we might have SHLIB_MARK1 get the value ".shlib." and SHLIB_MARK2 be empty,
+# or have that configurable.
+SHLIB_MARK1=.shlib-clean.
+SHLIB_MARK2=.shlib.
 
-# Shared library base address. Currently only used on Windows.
-#
-
-BASEADDR=
-
-DIRS=   crypto fips ssl engines apps test tools
-SHLIBDIRS= crypto ssl fips
+DIRS=   crypto ssl rsaref $(SHLIB_MARK1) apps test tools $(SHLIB_MARK2)
+SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
 SDIRS=  \
-	objects \
 	md2 md4 md5 sha mdc2 hmac ripemd \
-	des aes rc2 rc4 rc5 idea bf cast camellia seed \
-	bn ec rsa dsa ecdsa dh ecdh dso engine \
-	buffer bio stack lhash rand err \
-	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-	store pqueue
-# keep in mind that the above list is adjusted by ./Configure
-# according to no-xxx arguments...
+	des rc2 rc4 rc5 idea bf cast \
+	bn rsa dsa dh dso engine \
+	buffer bio stack lhash rand err objects \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp
 
-# tests to perform.  "alltests" is a special word indicating that all tests
-# should be performed.
-TESTS = alltests
-
-MAKEFILE= Makefile
+MAKEFILE= Makefile.ssl
+MAKE=     make -f Makefile.ssl
 
 MANDIR=$(OPENSSLDIR)/man
 MAN1=1
 MAN3=3
-MANSUFFIX=
 SHELL=/bin/sh
 
 TOP=    .
@@ -163,329 +180,141 @@ ONEDIRS=out tmp
 EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
 WDIRS=  windows
 LIBS=   libcrypto.a libssl.a
-SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
-SHARED_SSL=libssl$(SHLIB_EXT)
-SHARED_FIPS=
-SHARED_LIBS=
-SHARED_LIBS_LINK_EXTS=
-SHARED_LDFLAGS=
+SHARED_LIBS=libcrypto.so libssl.so
 
 GENERAL=        Makefile
 BASENAME=       openssl
-NAME=           $(BASENAME)-fips-$(VERSION)
+NAME=           $(BASENAME)-$(VERSION)
 TARFILE=        $(NAME).tar
 WTARFILE=       $(NAME)-win.tar
-EXHEADER=       e_os2.h
+EXHEADER=       e_os.h e_os2.h
 HEADER=         e_os.h
 
-all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
-
-# as we stick to -e, CLEARENV ensures that local variables in lower
-# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
-# shell, which [annoyingly enough] terminates unset with error if VAR
-# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
-# which terminates unset with error if no variable was present:-(
-CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
-		$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}	\
-		$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}		\
-		$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL}	\
-		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
-		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
-		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
-		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS}		\
-		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
-		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
-
-BUILDENV=	PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
-		CC='${CC}' CFLAG='${CFLAG}' 			\
-		AS='${CC}' ASFLAG='${CFLAG} -c'			\
-		AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}'	\
-		SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/lib'	\
-		INSTALL_PREFIX='${INSTALL_PREFIX}'		\
-		INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}'	\
-		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD ${MAKEDEPPROG}' \
-		DEPFLAG='-DOPENSSL_NO_DEPRECATED ${DEPFLAG}'	\
-		MAKEDEPPROG='${MAKEDEPPROG}'			\
-		SHARED_LDFLAGS='${SHARED_LDFLAGS}'		\
-		KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}'	\
-		EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}'	\
-		SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}'	\
-		PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}'	\
-		CPUID_OBJ='${CPUID_OBJ}'			\
-		BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' 	\
-		AES_ASM_OBJ='${AES_ASM_OBJ}'			\
-		BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}'	\
-		RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}'	\
-		SHA1_ASM_OBJ='${SHA1_ASM_OBJ}'			\
-		MD5_ASM_OBJ='${MD5_ASM_OBJ}'			\
-		RMD160_ASM_OBJ='${RMD160_ASM_OBJ}'		\
-		FIPSLIBDIR='${FIPSLIBDIR}' FIPSCANLIB='${FIPSCANLIB}' \
-		FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}'	\
-		FIPS_EX_OBJ='${FIPS_EX_OBJ}'	\
-		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
-# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
-# which in turn eliminates ambiguities in variable treatment with -e.
-
-# BUILD_CMD is a generic macro to build a given target in a given
-# subdirectory.  The target must be given through the shell variable
-# `target' and the subdirectory to build in must be given through `dir'.
-# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
-# BUILD_ONE_CMD instead.
-#
-# BUILD_ONE_CMD is a macro to build a given target in a given
-# subdirectory if that subdirectory is part of $(DIRS).  It requires
-# exactly the same shell variables as BUILD_CMD.
-#
-# RECURSIVE_BUILD_CMD is a macro to build a given target in all
-# subdirectories defined in $(DIRS).  It requires that the target
-# is given through the shell variable `target'.
-BUILD_CMD=  if [ -d "$$dir" ]; then \
-	    (	cd $$dir && echo "making $$target in $$dir..." && \
-		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
-	    ) || exit 1; \
-	    fi
-RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
-BUILD_ONE_CMD=\
-	if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
-		$(BUILD_CMD); \
+all: Makefile.ssl
+	@need_shlib=true; \
+	for i in $(DIRS) ;\
+	do \
+	if [ "$$i" = ".shlib-clean." ]; then \
+		if [ "$(SHLIB_TARGET)" != "" ]; then \
+			$(MAKE) clean-shared; \
+		fi; \
+	elif [ "$$i" = ".shlib." ]; then \
+		if [ "$(SHLIB_TARGET)" != "" ]; then \
+			$(MAKE) $(SHARED_LIBS); \
+		fi; \
+		need_shlib=false; \
+	else \
+		(cd $$i && echo "making all in $$i..." && \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' SDIRS='${SDIRS}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' all ) || exit 1; \
+	fi; \
+	done; \
+	if $$need_shlib && [ "$(SHLIB_MARK1)" != "" -o "$(SHLIB_MARK1)" != "" ]; then \
+		$(MAKE) $(SHARED_LIBS); \
 	fi
 
-reflect:
-	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
-
-FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
-	../crypto/aes/aes_ecb.o \
-	../crypto/aes/aes_ofb.o \
-	../crypto/bn/bn_add.o \
-	../crypto/bn/bn_blind.o \
-	../crypto/bn/bn_ctx.o \
-	../crypto/bn/bn_div.o \
-	../crypto/bn/bn_exp2.o \
-	../crypto/bn/bn_exp.o \
-	../crypto/bn/bn_gcd.o \
-	../crypto/bn/bn_lib.o \
-	../crypto/bn/bn_mod.o \
-	../crypto/bn/bn_mont.o \
-	../crypto/bn/bn_mul.o \
-	../crypto/bn/bn_prime.o \
-	../crypto/bn/bn_rand.o \
-	../crypto/bn/bn_recp.o \
-	../crypto/bn/bn_shift.o \
-	../crypto/bn/bn_sqr.o \
-	../crypto/bn/bn_word.o \
-	../crypto/bn/bn_x931p.o \
-	../crypto/buffer/buf_str.o \
-	../crypto/cryptlib.o \
-	../crypto/des/cfb64ede.o \
-	../crypto/des/cfb64enc.o \
-	../crypto/des/cfb_enc.o \
-	../crypto/des/ecb3_enc.o \
-	../crypto/des/ecb_enc.o \
-	../crypto/des/ofb64ede.o \
-	../crypto/des/ofb64enc.o \
-	../crypto/des/fcrypt.o \
-	../crypto/des/set_key.o \
-	../crypto/dsa/dsa_utl.o \
-	../crypto/dsa/dsa_sign.o \
-	../crypto/dsa/dsa_vrf.o \
-	../crypto/err/err.o \
-	../crypto/evp/digest.o \
-	../crypto/evp/enc_min.o \
-	../crypto/evp/e_aes.o \
-	../crypto/evp/e_des3.o \
-	../crypto/evp/p_sign.o \
-	../crypto/evp/p_verify.o \
-	../crypto/mem_clr.o \
-	../crypto/mem.o \
-	../crypto/rand/md_rand.o \
-	../crypto/rand/rand_egd.o \
-	../crypto/rand/randfile.o \
-	../crypto/rand/rand_lib.o \
-	../crypto/rand/rand_os2.o \
-	../crypto/rand/rand_unix.o \
-	../crypto/rand/rand_win.o \
-	../crypto/rsa/rsa_lib.o \
-	../crypto/rsa/rsa_none.o \
-	../crypto/rsa/rsa_oaep.o \
-	../crypto/rsa/rsa_pk1.o \
-	../crypto/rsa/rsa_pss.o \
-	../crypto/rsa/rsa_ssl.o \
-	../crypto/rsa/rsa_x931.o \
-	../crypto/sha/sha1dgst.o \
-	../crypto/sha/sha256.o \
-	../crypto/sha/sha512.o \
-	../crypto/uid.o
-
-sub_all: build_all
-build_all: build_libs build_apps build_tests build_tools
-
-build_libs: build_crypto build_fips build_ssl build_shared build_engines
-
-build_crypto:
-	if [ -n "$(FIPSCANLIB)" ]; then \
-		EXCL_OBJ='$(AES_ASM_OBJ) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
-		ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
+sub_all:
+	@need_shlib=true; \
+	for i in $(DIRS) ;\
+	do \
+	if [ "$$i" = ".shlib-clean." ]; then \
+		if [ "$(SHLIB_TARGET)" != "" ]; then \
+			$(MAKE) clean-shared; \
+		fi; \
+	elif [ "$$i" = ".shlib." ]; then \
+		if [ "$(SHLIB_TARGET)" != "" ]; then \
+			$(MAKE) $(SHARED_LIBS); \
+		fi; \
+		need_shlib=false; \
 	else \
-		ARX='${AR}' ; \
-	fi ; export ARX ; \
-		dir=crypto; target=all; $(BUILD_ONE_CMD)
-build_fips:
-	@dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
-build_ssl:
-	@dir=ssl; target=all; $(BUILD_ONE_CMD)
-build_engines:
-	@dir=engines; target=all; $(BUILD_ONE_CMD)
-build_apps:
-	@dir=apps; target=all; $(BUILD_ONE_CMD)
-build_tests:
-	@dir=test; target=all; $(BUILD_ONE_CMD)
-build_tools:
-	@dir=tools; target=all; $(BUILD_ONE_CMD)
+		(cd $$i && echo "making all in $$i..." && \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' all ) || exit 1; \
+	fi; \
+	done; \
+	if $$need_shlib && [ "$(SHLIB_MARK1)" != "" -o "$(SHLIB_MARK1)" != "" ]; then \
+		$(MAKE) $(SHARED_LIBS); \
+	fi
 
-all_testapps: build_libs build_testapps
-build_testapps:
-	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
-
-build_shared:	$(SHARED_LIBS)
-libcrypto$(SHLIB_EXT): libcrypto.a $(SHARED_FIPS)
+libcrypto.so: libcrypto.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		if [ "$(FIPSCANLIB)" = "libfips" ]; then \
-			$(ARD) libcrypto.a fipscanister.o ; \
-			$(MAKE) SHLIBDIRS='crypto' SHLIBDEPS='-lfips' build-shared; \
-			$(AR) libcrypto.a fips/fipscanister.o ; \
-		else \
-			if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
-				FIPSLD_CC=$(CC); CC=fips/fipsld; \
-				export CC FIPSLD_CC; \
-			fi; \
-			$(MAKE) -e SHLIBDIRS='crypto' build-shared; \
-		fi \
+		$(MAKE) SHLIBDIRS=crypto $(SHLIB_TARGET); \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
-		exit 1; \
 	fi
-
-libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
+libssl.so: libcrypto.so libssl.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		shlibdeps=-lcrypto; \
-		[ "$(FIPSCANLIB)" = "libfips" ] && shlibdeps="$$shlibdeps -lfips"; \
-		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS="$$shlibdeps" build-shared; \
-	else \
-		echo "There's no support for shared libraries on this platform" >&2 ; \
-		exit 1; \
-	fi
-
-fips/fipscanister.o:	build_fips
-libfips$(SHLIB_EXT):		fips/fipscanister.o
-	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		FIPSLD_CC=$(CC); CC=fips/fipsld; export CC FIPSLD_CC; \
-		$(MAKE) -f Makefile.shared -e $(BUILDENV) \
-			CC=$${CC} LIBNAME=fips THIS=$@ \
-			LIBEXTRAS=fips/fipscanister.o \
-			LIBDEPS="$(EX_LIBS)" \
-			LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			link_o.$(SHLIB_TARGET) || { rm -f $@; exit 1; } \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-L. -lcrypto' $(SHLIB_TARGET); \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
-		exit 1; \
 	fi
 
-libfips.a:
-	dir=fips; target=all; $(BUILD_ONE_CMD)
-
 clean-shared:
-	@set -e; for i in $(SHLIBDIRS); do \
-		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
-			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
-			for j in $${tmp:-x}; do \
-				( set -x; rm -f lib$$i$$j ); \
-			done; \
-		fi; \
-		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
-		if [ "$(PLATFORM)" = "Cygwin" ]; then \
-			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
-		fi; \
+	for i in ${SHLIBDIRS}; do \
+	rm -f lib$$i.so \
+		lib$$i.so.${SHLIB_MAJOR} \
+		lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
 	done
 
-link-shared:
-	@ set -e; for i in ${SHLIBDIRS}; do \
-		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
-			symlink.$(SHLIB_TARGET); \
-		libs="$$libs -l$$i"; \
+linux-shared:
+	libs='${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	rm -f lib$$i.so \
+		lib$$i.so.${SHLIB_MAJOR} \
+		lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
+	( set -x; ${CC}  -shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-Wl,-S,-soname=lib$$i.so.${SHLIB_MAJOR} \
+		-Wl,--whole-archive lib$$i.a \
+		-Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
+	libs="$$libs -L. -l$$i"; \
+	( set -x; \
+		ln -s lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			lib$$i.so.${SHLIB_MAJOR}; \
+		ln -s lib$$i.so.${SHLIB_MAJOR} lib$$i.so ); \
 	done
 
-build-shared: do_$(SHLIB_TARGET) link-shared
-
-do_$(SHLIB_TARGET):
-	@ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
-			libs="$(LIBKRB5) $$libs"; \
-		fi; \
-		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
-			LIBDEPS="$$libs $(EX_LIBS)" \
-			link_a.$(SHLIB_TARGET); \
-		libs="-l$$i $$libs"; \
+# This assumes that GNU utilities are *not* used
+true64-shared:
+	libs='${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( set -x; ${CC}  -shared -no_archive -o lib$$i.so \
+		-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
+		-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
+	libs="$$libs -L. -l$$i"; \
 	done
 
-libcrypto.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL-libcrypto'; \
-	    echo 'Description: OpenSSL cryptography library'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
+# This assumes that GNU utilities are *not* used
+solaris-shared:
+	libs='${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	rm -f lib$$i.so \
+		lib$$i.so.${SHLIB_MAJOR} \
+		lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
+	( set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-h lib$$i.so.${SHLIB_MAJOR} \
+		-z allextract lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
+	libs="$$libs -L. -l$$i"; \
+	ln -s lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		lib$$i.so.${SHLIB_MAJOR}; \
+	ln -s lib$$i.so.${SHLIB_MAJOR} lib$$i.so; \
+	done
 
-libssl.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL'; \
-	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
-
-openssl.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL'; \
-	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
-
-Makefile: Makefile.org Configure config
-	@echo "Makefile is older than Makefile.org, Configure or config."
+Makefile.ssl: Makefile.org
+	@echo "Makefile.ssl is older than Makefile.org."
 	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
 	@false
 
 libclean:
-	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
+	rm -f *.a */lib */*/lib
 
-clean:	libclean
-	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
-	@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
-	rm -f $(LIBS)
-	rm -f openssl.pc libssl.pc libcrypto.pc
-	rm -f speed.* .pure
+clean:
+	rm -f shlib/*.o *.o core a.out fluff *.map rehash.time testlog make.log cctest cctest.c
+	@for i in $(DIRS) ;\
+	do \
+	if echo "$$i" | grep -v '^\.'; then \
+		(cd $$i && echo "making clean in $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' clean ) || exit 1; \
+		rm -f $(LIBS); \
+	fi; \
+	done;
+	rm -f *.a *.o speed.* *.map *.so .pure core
 	rm -f $(TARFILE)
-	@set -e; for i in $(ONEDIRS) ;\
+	@for i in $(ONEDIRS) ;\
 	do \
 	rm -fr $$i/*; \
 	done
@@ -495,183 +324,148 @@ makefile.one: files
 	sh util/do_ms.sh
 
 files:
-	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
-	@set -e; target=files; $(RECURSIVE_BUILD_CMD)
+	$(PERL) $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
+	@for i in $(DIRS) ;\
+	do \
+	if echo "$$i" | grep -v '^\.'; then \
+		(cd $$i && echo "making 'files' in $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' files ) || exit 1; \
+	fi; \
+	done;
 
 links:
+	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
-	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
-
-gentests:
-	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
+	@for i in $(DIRS); do \
+	if echo "$$i" | grep -v '^\.'; then \
+		(cd $$i && echo "making links in $$i..." && \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' links ) || exit 1; \
+	fi; \
+	done;
 
 dclean:
 	rm -f *.bak
-	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
+	@for i in $(DIRS) ;\
+	do \
+	if echo "$$i" | grep -v '^\.'; then \
+		(cd $$i && echo "making dclean in $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' dclean ) || exit 1; \
+	fi; \
+	done;
 
 rehash: rehash.time
-rehash.time: certs apps
-	@if [ -z "$(CROSS_COMPILE)" ]; then \
-		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
-		OPENSSL_DEBUG_MEMORY=on; \
-		export OPENSSL OPENSSL_DEBUG_MEMORY; \
-		$(PERL) tools/c_rehash certs) && \
-		touch rehash.time; \
-	else :; fi
+rehash.time: certs
+	@(OPENSSL="`pwd`/apps/openssl"; export OPENSSL; $(PERL) tools/c_rehash certs)
+	touch rehash.time
 
 test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
-	util/opensslwrap.sh version -a
+	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' tests );
+	@apps/openssl version -a
 
 report:
 	@$(PERL) util/selftest.pl
 
 depend:
-	@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
+	@for i in $(DIRS) ;\
+	do \
+	if echo "$$i" | grep -v '^\.'; then \
+		(cd $$i && echo "making dependencies $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' DEPFLAG='${DEPFLAG}' depend ) || exit 1; \
+	fi; \
+	done;
 
 lint:
-	@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
+	@for i in $(DIRS) ;\
+	do \
+	if echo "$$i" | grep -v '^\.'; then \
+		(cd $$i && echo "making lint $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' lint ) || exit 1; \
+	fi; \
+	done;
 
 tags:
-	rm -f TAGS
-	find . -name '[^.]*.[ch]' | xargs etags -a
+	@for i in $(DIRS) ;\
+	do \
+	if echo "$$i" | grep -v '^\.'; then \
+		(cd $$i && echo "making tags $$i..." && \
+		$(MAKE) SDIRS='${SDIRS}' tags ) || exit 1; \
+	fi; \
+	done;
 
 errors:
-	$(PERL) util/mkerr.pl -recurse -write
-	(cd engines; $(MAKE) PERL=$(PERL) errors)
-	$(PERL) util/ck_errf.pl */*.c */*/*.c
+	perl util/mkerr.pl -recurse -write
 
 stacks:
-	$(PERL) util/mkstack.pl -write
+	perl util/mkstack.pl -write
 
 util/libeay.num::
-	$(PERL) util/mkdef.pl crypto update
+	perl util/mkdef.pl crypto update
 
 util/ssleay.num::
-	$(PERL) util/mkdef.pl ssl update
-
-crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
-	$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
-crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
-	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
-
-apps/openssl-vms.cnf: apps/openssl.cnf
-	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
-
-crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
-	$(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
+	perl util/mkdef.pl ssl update
 
+crypto/objects/obj_dat.h: crypto/objects/obj_mac.h crypto/objects/obj_dat.pl
+	perl crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
+crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt 
+	perl crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
 
 TABLE: Configure
 	(echo 'Output of `Configure TABLE'"':"; \
-	$(PERL) Configure TABLE) > TABLE
+	perl Configure TABLE) > TABLE
 
-update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
+update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h TABLE
 
-# Build distribution tar-file. As the list of files returned by "find" is
-# pretty long, on several platforms a "too many arguments" error or similar
-# would occur. Therefore the list of files is temporarily stored into a file
-# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
-# tar does not support the --files-from option.
 tar:
-	find . -type d -print | xargs chmod 755
-	find . -type f -print | xargs chmod a+r
-	find . -type f -perm -0100 -print | xargs chmod a+x
-	find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
-	$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
-	tardy --user_number=0  --user_name=openssl \
-	      --group_number=0 --group_name=openssl \
-	      --prefix=openssl-fips-$(VERSION) - |\
-	gzip --best >../$(TARFILE).gz; \
-	rm -f ../$(TARFILE).list; \
-	ls -l ../$(TARFILE).gz
-
-tar-snap:
 	@$(TAR) $(TARFLAGS) -cvf - \
-		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
+		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort` |\
 	tardy --user_number=0  --user_name=openssl \
 	      --group_number=0 --group_name=openssl \
-	      --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
-	ls -l ../$(TARFILE)
+	      --prefix=openssl-$(VERSION) - |\
+	gzip --best >../$(TARFILE).gz; \
+	ls -l ../$(TARFILE).gz
 
 dist:   
 	$(PERL) Configure dist
 	@$(MAKE) dist_pem_h
 	@$(MAKE) SDIRS='${SDIRS}' clean
-	@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
+	@$(MAKE) tar
 
 dist_pem_h:
-	(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
+	(cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean)
 
-install: all install_sw
-
-install_sw:
+install: all install_docs
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
-		$(INSTALL_PREFIX)$(OPENSSLDIR)/private
-	@set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/private \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/lib
+	@for i in $(EXHEADER) ;\
 	do \
 	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 	done;
-	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
-	@set -e; for i in $(LIBS) ;\
+	@for i in $(DIRS) ;\
+	do \
+	if echo "$$i" | grep -v '^\.'; then \
+		(cd $$i; echo "installing $$i..."; \
+		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' install ); \
+	fi; \
+	done
+	@for i in $(LIBS) ;\
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
-			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
-		fi; \
-	done;
-	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
-		tmp="$(SHARED_LIBS)"; \
-		for i in $${tmp:-x}; \
-		do \
-			if [ -f "$$i" -o -f "$$i.a" ]; then \
-			(       echo installing $$i; \
-				if [ "$(PLATFORM)" != "Cygwin" ]; then \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
-				else \
-					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
-					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
-				fi ); \
-			fi; \
-		done; \
-		(	here="`pwd`"; \
-			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-			$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
-		if [ "$(INSTALLTOP)" != "/usr" ]; then \
-			echo 'OpenSSL shared libraries have been installed in:'; \
-			echo '  $(INSTALLTOP)'; \
-			echo ''; \
-			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
-		fi; \
-	fi
-	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libcrypto.pc
-	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libssl.pc
-	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+		fi \
+	done
 
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -679,45 +473,30 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man3 \
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
-	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
-	here="`pwd`"; \
-	filecase=; \
-	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
-		filecase=-i; \
-	fi; \
-	set -e; for i in doc/apps/*.pod; do \
+	@echo installing man 1 and man 5
+	@for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
-		sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
-		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
-		(cd `$(PERL) util/dirname.pl $$i`; \
-		sh -c "$$pod2man \
-			--section=$$sec --center=OpenSSL \
-			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(PERL) util/extract-names.pl < $$i | \
-			(grep -v $$filecase "^$$fn\$$"; true) | \
-			(grep -v "[	]"; true) | \
-			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
-			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
-			 done); \
-	done; \
-	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+		sec=`[ "$$fn" = "config" ] && echo 5 || echo 1`; \
+		(cd `dirname $$i`; \
+		$(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
+			 --release=$(VERSION) `basename $$i`) \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+	done
+	@echo installing man 3 and man 7
+	@for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
-		sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
-		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
-		(cd `$(PERL) util/dirname.pl $$i`; \
-		sh -c "$$pod2man \
-			--section=$$sec --center=OpenSSL \
-			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(PERL) util/extract-names.pl < $$i | \
-			(grep -v $$filecase "^$$fn\$$"; true) | \
-			(grep -v "[	]"; true) | \
-			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
-			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
-			 done); \
+		sec=`[ "$$fn" = "des_modes" ] && echo 7 || echo 3`; \
+		(cd `dirname $$i`; \
+		$(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`) \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
 	done
 
+shlib: all
+	if [ ! -d shlib_dir ] ; then mkdir shlib_dir ; else rm -f shlib_dir/* ; fi
+	cd shlib_dir ; ar -x ../libcrypto.a && $(CC) -shared ./*.o -Wl,-soname -Wl,libcrypto.so.0.9 \
+            -o ./libcrypto.so.0.9.4 && rm *.o
+	cd shlib_dir ; ar -x ../libssl.a && $(CC) -shared ./*.o -Wl,-soname -Wl,libssl.so.0.9 \
+            -o ./libssl.so.0.9.4 && rm *.o
+
 # DO NOT DELETE THIS LINE -- make depend depends on it.

Makefile.shared

@@ -1,609 +0,0 @@
-#
-# Helper makefile to link shared libraries in a portable way.
-# This is much simpler than libtool, and hopefully not too error-prone.
-#
-# The following variables need to be set on the command line to build
-# properly
-
-# CC contains the current compiler.  This one MUST be defined
-CC=cc
-CFLAGS=$(CFLAG)
-# LDFLAGS contains flags to be used when temporary object files (when building
-# shared libraries) are created, or when an application is linked.
-# SHARED_LDFLAGS contains flags to be used when the shared library is created.
-LDFLAGS=
-SHARED_LDFLAGS=
-
-# LIBNAME contains just the name of the library, without prefix ("lib"
-# on Unix, "cyg" for certain forms under Cygwin...) or suffix (.a, .so,
-# .dll, ...).  This one MUST have a value when using this makefile to
-# build shared libraries.
-# For example, to build libfoo.so, you need to do the following:
-#LIBNAME=foo
-LIBNAME=
-
-# APPNAME contains just the name of the application, without suffix (""
-# on Unix, ".exe" on Windows, ...).  This one MUST have a value when using
-# this makefile to build applications.
-# For example, to build foo, you need to do the following:
-#APPNAME=foo
-APPNAME=
-
-# OBJECTS contains all the object files to link together into the application.
-# This must contain at least one object file.
-#OBJECTS=foo.o
-OBJECTS=
-
-# LIBEXTRAS contains extra modules to link together with the library.
-# For example, if a second library, say libbar.a needs to be linked into
-# libfoo.so, you need to do the following:
-#LIBEXTRAS=libbar.a
-# Note that this MUST be used when using the link_o targets, to hold the
-# names of all object files that go into the target library.
-LIBEXTRAS=
-
-# LIBVERSION contains the current version of the library.
-# For example, to build libfoo.so.1.2, you need to do the following:
-#LIBVERSION=1.2
-LIBVERSION=
-
-# LIBCOMPATVERSIONS contains the compatibility versions (a list) of
-# the library.  They MUST be in decreasing order.
-# For example, if libfoo.so.1.2.1 is backward compatible with libfoo.so.1.2
-# and libfoo.so.1, you need to do the following:
-#LIBCOMPATVERSIONS=1.2 1
-# Note that on systems that use sonames, the last number will appear as
-# part of it.
-# It's also possible, for systems that support it (Tru64, for example),
-# to add extra compatibility info with more precision, by adding a second
-# list of versions, separated from the first with a semicolon, like this:
-#LIBCOMPATVERSIONS=1.2 1;1.2.0 1.1.2 1.1.1 1.1.0 1.0.0
-LIBCOMPATVERSIONS=
-
-# LIBDEPS contains all the flags necessary to cover all necessary
-# dependencies to other libraries.
-LIBDEPS=
-
-#------------------------------------------------------------------------------
-# The rest is private to this makefile.
-
-SET_X=:
-#SET_X=set -x
-
-top:
-	echo "Trying to use this makefile interactively?  Don't."
-
-CALC_VERSIONS=	\
-	SHLIB_COMPAT=; SHLIB_SOVER=; \
-	if [ -n "$(LIBVERSION)$(LIBCOMPATVERSIONS)" ]; then \
-		prev=""; \
-		for v in `echo "$(LIBVERSION) $(LIBCOMPATVERSIONS)" | cut -d';' -f1`; do \
-			SHLIB_SOVER_NODOT=$$v; \
-			SHLIB_SOVER=.$$v; \
-			if [ -n "$$prev" ]; then \
-				SHLIB_COMPAT="$$SHLIB_COMPAT .$$prev"; \
-			fi; \
-			prev=$$v; \
-		done; \
-	fi
-
-LINK_APP=	\
-  ( $(SET_X);   \
-    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
-    LDCMD="$${LDCMD:-$(CC)}"; LDFLAGS="$${LDFLAGS:-$(CFLAGS)}"; \
-    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
-    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
-    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-    $${LDCMD} $${LDFLAGS} -o $${APPNAME:=$(APPNAME)} $(OBJECTS) $${LIBDEPS} )
-
-LINK_SO=	\
-  ( $(SET_X);   \
-    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
-    SHAREDCMD="$${SHAREDCMD:-$(CC)}"; \
-    SHAREDFLAGS="$${SHAREDFLAGS:-$(CFLAGS) $(SHARED_LDFLAGS)}"; \
-    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
-    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
-    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-    $${SHAREDCMD} $${SHAREDFLAGS} \
-	-o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
-	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS \
-  ) && $(SYMLINK_SO)
-
-SYMLINK_SO=	\
-	if [ -n "$$INHIBIT_SYMLINKS" ]; then :; else \
-		prev=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
-		if [ -n "$$SHLIB_COMPAT" ]; then \
-			for x in $$SHLIB_COMPAT; do \
-				( $(SET_X); rm -f $$SHLIB$$x$$SHLIB_SUFFIX; \
-				  ln -s $$prev $$SHLIB$$x$$SHLIB_SUFFIX ); \
-				prev=$$SHLIB$$x$$SHLIB_SUFFIX; \
-			done; \
-		fi; \
-		if [ -n "$$SHLIB_SOVER" ]; then \
-			( $(SET_X); rm -f $$SHLIB$$SHLIB_SUFFIX; \
-			  ln -s $$prev $$SHLIB$$SHLIB_SUFFIX ); \
-		fi; \
-	fi
-
-LINK_SO_A=	SHOBJECTS="lib$(LIBNAME).a $(LIBEXTRAS)"; $(LINK_SO)
-LINK_SO_O=	SHOBJECTS="$(LIBEXTRAS)"; $(LINK_SO)
-
-LINK_SO_A_VIA_O=	\
-  SHOBJECTS=lib$(LIBNAME).o; \
-  ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
-  ( $(SET_X); \
-    ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
-  $(LINK_SO) && rm -f $(LIBNAME).o
-
-LINK_SO_A_UNPACKED=	\
-  UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
-  (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && \
-  ([ -z "$(LIBEXTRAS)" ] || cp $(LIBEXTRAS) $$UNPACKDIR) && \
-  SHOBJECTS=$$UNPACKDIR/*.o; \
-  $(LINK_SO) && rm -rf $$UNPACKDIR
-
-DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
-
-DO_GNU_SO=$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"
-
-DO_GNU_APP=LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"
-
-#This is rather special.  It's a special target with which one can link
-#applications without bothering with any features that have anything to
-#do with shared libraries, for example when linking against static
-#libraries.  It's mostly here to avoid a lot of conditionals everywhere
-#else...
-link_app.:
-	$(LINK_APP)
-
-link_o.gnu:
-	@ $(DO_GNU_SO); $(LINK_SO_O)
-link_a.gnu:
-	@ $(DO_GNU_SO); $(LINK_SO_A)
-link_app.gnu:
-	@ $(DO_GNU_APP); $(LINK_APP)
-
-link_o.bsd:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS=" "; \
-	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
-	NOALLSYMSFLAGS=; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
-	fi; $(LINK_SO_O)
-link_a.bsd:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS=" "; \
-	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
-	NOALLSYMSFLAGS=; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
-	fi; $(LINK_SO_A)
-link_app.bsd:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_APP); else \
-	LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBPATH)"; \
-	fi; $(LINK_APP)
-
-# For Darwin AKA Mac OS/X (dyld)
-# link_o.darwin produces .so, because we let it use dso_dlfcn module,
-# which has .so extension hard-coded. One can argue that one should
-# develop special dso module for MacOS X. At least manual encourages
-# to use native NSModule(3) API and refers to dlfcn as termporary hack.
-link_o.darwin:
-	@ $(CALC_VERSIONS); \
-	SHLIB=`expr "$$THIS" : '.*/\([^/\.]*\)\.'`; \
-	SHLIB=$${SHLIB:-lib$(LIBNAME)}; \
-	SHLIB_SUFFIX=`expr "$$THIS" : '.*\(\.[^\.]*\)$$'`; \
-	SHLIB_SUFFIX=$${SHLIB_SUFFIX:-.so}; \
-	ALLSYMSFLAGS='-all_load'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
-	if [ -n "$(LIBVERSION)" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
-	fi; \
-	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.darwin:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	ALLSYMSFLAGS='-all_load'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
-	if [ -n "$(LIBVERSION)" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
-	fi; \
-	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
-	fi; \
-	SHAREDFLAGS="$$SHAREDFLAGS -install_name ${INSTALLTOP}/lib/$$SHLIB${SHLIB_EXT}"; \
-	$(LINK_SO_A)
-link_app.darwin:	# is there run-path on darwin?
-	$(LINK_APP)
-
-link_o.cygwin:
-	@ $(CALC_VERSIONS); \
-	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME); \
-	base=-Wl,--enable-auto-image-base; \
-	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-		SHLIB=$(LIBNAME)eay32; base=; \
-	fi; \
-	SHLIB_SUFFIX=.dll; \
-	LIBVERSION="$(LIBVERSION)"; \
-	SHLIB_SOVER=${LIBVERSION:+"-$(LIBVERSION)"}; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
-	$(LINK_SO_O)
-link_a.cygwin:
-	@ $(CALC_VERSIONS); \
-	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME); \
-	base=-Wl,--enable-auto-image-base; \
-	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-		SHLIB=$(LIBNAME)eay32; \
-		base=;  [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
-	fi; \
-	SHLIB_SUFFIX=.dll; \
-	SHLIB_SOVER=-$(LIBVERSION); \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
-	[ -f apps/$$SHLIB$$SHLIB_SUFFIX ] && rm apps/$$SHLIB$$SHLIB_SUFFIX; \
-	[ -f test/$$SHLIB$$SHLIB_SUFFIX ] && rm test/$$SHLIB$$SHLIB_SUFFIX; \
-	$(LINK_SO_A) || exit 1; \
-	cp -p $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX apps/; \
-	cp -p $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX test/
-link_app.cygwin:
-	$(LINK_APP)
-
-link_o.alpha-osf1:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
-		fi; \
-	fi; \
-	$(LINK_SO_O)
-link_a.alpha-osf1:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
-		fi; \
-	fi; \
-	$(LINK_SO_A)
-link_app.alpha-osf1:
-	@if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDFLAGS="$(CFLAGS) -rpath $(LIBRPATH)"; \
-	fi; \
-	$(LINK_APP)
-
-link_o.solaris:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		MINUSZ='-z '; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
-		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.solaris:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		MINUSZ='-z '; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=;\
-		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
-		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
-	fi; \
-	$(LINK_SO_A)
-link_app.solaris:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDFLAGS="$(CFLAGS) -R $(LIBRPATH)"; \
-	fi; \
-	$(LINK_APP)
-
-# OpenServer 5 native compilers used
-link_o.svr3:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.svr3:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; \
-	$(LINK_SO_A_UNPACKED)
-link_app.svr3:
-	@${DETECT_GNU_LD} && $(DO_GNU_APP); \
-	$(LINK_APP)
-
-# UnixWare 7 and OpenUNIX 8 native compilers used
-link_o.svr5:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHARE_FLAG='-G'; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.svr5:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHARE_FLAG='-G'; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; \
-	$(LINK_SO_A_UNPACKED)
-link_app.svr5:
-	@${DETECT_GNU_LD} && $(DO_GNU_APP); \
-	$(LINK_APP)
-
-link_o.irix:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		MINUSWL=""; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
-		ALLSYMSFLAGS="$${MINUSWL}-all"; \
-		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.irix:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		MINUSWL=""; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
-		ALLSYMSFLAGS="$${MINUSWL}-all"; \
-		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
-	fi; \
-	$(LINK_SO_A)
-link_app.irix:
-	@LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"; \
-	$(LINK_APP)
-
-# 32-bit PA-RISC HP-UX embeds the -L pathname of libs we link with, so
-# we compensate for it with +cdp ../: and +cdp ./:. Yes, these rewrite
-# rules imply that we can only link one level down in catalog structure,
-# but that's what takes place for the moment of this writing. +cdp option
-# was introduced in HP-UX 11.x and applies in 32-bit PA-RISC link
-# editor context only [it's simply ignored in other cases, which are all
-# ELFs by the way].
-#
-link_o.hpux:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	expr "$(CFLAGS)" : '.*DSO_DLFCN' > /dev/null && SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,-Fl'; \
-	NOALLSYMSFLAGS=''; \
-	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
-	fi; \
-	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
-	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
-link_a.hpux:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,-Fl'; \
-	NOALLSYMSFLAGS=''; \
-	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
-	fi; \
-	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
-	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
-link_app.hpux:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_APP); else \
-	LDFLAGS="$(CFLAGS) -Wl,+s,+cdp,../:,+cdp,./:,+b,$(LIBRPATH)"; \
-	fi; \
-	$(LINK_APP)
-
-link_o.aix:
-	@ $(CALC_VERSIONS); \
-	OBJECT_MODE=`expr x$(SHARED_LDFLAGS) : 'x\-[a-z]*\(64\)'` || :; \
-	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS=''; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-G,-bexpall,-bnolibpath,-bM:SRE'; \
-	$(LINK_SO_O);
-link_a.aix:
-	@ $(CALC_VERSIONS); \
-	OBJECT_MODE=`expr x$(SHARED_LDFLAGS) : 'x\-[a-z]*\(64\)'` || : ; \
-	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-bnogc'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-G,-bexpall,-bnolibpath,-bM:SRE'; \
-	$(LINK_SO_A_VIA_O)
-link_app.aix:
-	LDFLAGS="$(CFLAGS) -Wl,-brtl,-blibpath:$(LIBRPATH):$${LIBPATH:-/usr/lib:/lib}"; \
-	$(LINK_APP)
-
-link_o.reliantunix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS=; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) -G'; \
-	$(LINK_SO_O)
-link_a.reliantunix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS=; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) -G'; \
-	$(LINK_SO_A_UNPACKED)
-link_app.reliantunix:
-	$(LINK_APP)
-
-# Targets to build symbolic links when needed
-symlink.gnu symlink.solaris symlink.svr3 symlink.svr5 symlink.irix \
-symlink.aix symlink.reliantunix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	$(SYMLINK_SO)
-symlink.darwin:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	$(SYMLINK_SO)
-symlink.hpux:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
-	$(SYMLINK_SO)
-# The following lines means those specific architectures do no symlinks
-symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath:
-
-# Compatibility targets
-link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu
-link_a.bsd-gcc-shared link_a.linux-shared link_a.gnu-shared: link_a.gnu
-link_app.bsd-gcc-shared link_app.linux-shared link_app.gnu-shared: link_app.gnu
-symlink.bsd-gcc-shared symlink.bsd-shared symlink.linux-shared symlink.gnu-shared: symlink.gnu
-link_o.bsd-shared: link_o.bsd
-link_a.bsd-shared: link_a.bsd
-link_app.bsd-shared: link_app.bsd
-link_o.darwin-shared: link_o.darwin
-link_a.darwin-shared: link_a.darwin
-link_app.darwin-shared: link_app.darwin
-symlink.darwin-shared: symlink.darwin
-link_o.cygwin-shared: link_o.cygwin
-link_a.cygwin-shared: link_a.cygwin
-link_app.cygwin-shared: link_app.cygwin
-symlink.cygwin-shared: symlink.cygwin
-link_o.alpha-osf1-shared: link_o.alpha-osf1
-link_a.alpha-osf1-shared: link_a.alpha-osf1
-link_app.alpha-osf1-shared: link_app.alpha-osf1
-symlink.alpha-osf1-shared: symlink.alpha-osf1
-link_o.tru64-shared: link_o.tru64
-link_a.tru64-shared: link_a.tru64
-link_app.tru64-shared: link_app.tru64
-symlink.tru64-shared: symlink.tru64
-link_o.tru64-shared-rpath: link_o.tru64-rpath
-link_a.tru64-shared-rpath: link_a.tru64-rpath
-link_app.tru64-shared-rpath: link_app.tru64-rpath
-symlink.tru64-shared-rpath: symlink.tru64-rpath
-link_o.solaris-shared: link_o.solaris
-link_a.solaris-shared: link_a.solaris
-link_app.solaris-shared: link_app.solaris
-symlink.solaris-shared: symlink.solaris
-link_o.svr3-shared: link_o.svr3
-link_a.svr3-shared: link_a.svr3
-link_app.svr3-shared: link_app.svr3
-symlink.svr3-shared: symlink.svr3
-link_o.svr5-shared: link_o.svr5
-link_a.svr5-shared: link_a.svr5
-link_app.svr5-shared: link_app.svr5
-symlink.svr5-shared: symlink.svr5
-link_o.irix-shared: link_o.irix
-link_a.irix-shared: link_a.irix
-link_app.irix-shared: link_app.irix
-symlink.irix-shared: symlink.irix
-link_o.hpux-shared: link_o.hpux
-link_a.hpux-shared: link_a.hpux
-link_app.hpux-shared: link_app.hpux
-symlink.hpux-shared: symlink.hpux
-link_o.aix-shared: link_o.aix
-link_a.aix-shared: link_a.aix
-link_app.aix-shared: link_app.aix
-symlink.aix-shared: symlink.aix
-link_o.reliantunix-shared: link_o.reliantunix
-link_a.reliantunix-shared: link_a.reliantunix
-link_app.reliantunix-shared: link_app.reliantunix
-symlink.reliantunix-shared: symlink.reliantunix

NEWS

@@ -5,358 +5,6 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
-  Major changes between OpenSSL 0.9.8d and OpenSSL 0.9.8e:
-
-      o Various ciphersuite selection fixes.
-      o RFC3779 support.
-
-  Major changes between OpenSSL 0.9.8c and OpenSSL 0.9.8d:
-
-      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
-      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
-      o Changes to ciphersuite selection algorithm
-
-  Major changes between OpenSSL 0.9.8b and OpenSSL 0.9.8c:
-
-      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
-      o New cipher Camellia
-
-  Major changes between OpenSSL 0.9.8a and OpenSSL 0.9.8b:
-
-      o Cipher string fixes.
-      o Fixes for VC++ 2005.
-      o Updated ECC cipher suite support.
-      o New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free().
-      o Zlib compression usage fixes.
-      o Built in dynamic engine compilation support on Win32.
-      o Fixes auto dynamic engine loading in Win32.
-
-  Major changes between OpenSSL 0.9.8 and OpenSSL 0.9.8a:
-
-      o Fix potential SSL 2.0 rollback, CVE-2005-2969
-      o Extended Windows CE support
-
-  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.8:
-
-      o Major work on the BIGNUM library for higher efficiency and to
-        make operations more streamlined and less contradictory.  This
-        is the result of a major audit of the BIGNUM library.
-      o Addition of BIGNUM functions for fields GF(2^m) and NIST
-        curves, to support the Elliptic Crypto functions.
-      o Major work on Elliptic Crypto; ECDH and ECDSA added, including
-        the use through EVP, X509 and ENGINE.
-      o New ASN.1 mini-compiler that's usable through the OpenSSL
-        configuration file.
-      o Added support for ASN.1 indefinite length constructed encoding.
-      o New PKCS#12 'medium level' API to manipulate PKCS#12 files.
-      o Complete rework of shared library construction and linking
-        programs with shared or static libraries, through a separate
-        Makefile.shared.
-      o Rework of the passing of parameters from one Makefile to another.
-      o Changed ENGINE framework to load dynamic engine modules
-        automatically from specifically given directories.
-      o New structure and ASN.1 functions for CertificatePair.
-      o Changed the ZLIB compression method to be stateful.
-      o Changed the key-generation and primality testing "progress"
-        mechanism to take a structure that contains the ticker
-        function and an argument.
-      o New engine module: GMP (performs private key exponentiation).
-      o New engine module: VIA PadLOck ACE extension in VIA C3
-        Nehemiah processors.
-      o Added support for IPv6 addresses in certificate extensions.
-        See RFC 1884, section 2.2.
-      o Added support for certificate policy mappings, policy
-        constraints and name constraints.
-      o Added support for multi-valued AVAs in the OpenSSL
-        configuration file.
-      o Added support for multiple certificates with the same subject
-        in the 'openssl ca' index file.
-      o Make it possible to create self-signed certificates using
-        'openssl ca -selfsign'.
-      o Make it possible to generate a serial number file with
-        'openssl ca -create_serial'.
-      o New binary search functions with extended functionality.
-      o New BUF functions.
-      o New STORE structure and library to provide an interface to all
-        sorts of data repositories.  Supports storage of public and
-        private keys, certificates, CRLs, numbers and arbitrary blobs.
-	This library is unfortunately unfinished and unused withing
-	OpenSSL.
-      o New control functions for the error stack.
-      o Changed the PKCS#7 library to support one-pass S/MIME
-        processing.
-      o Added the possibility to compile without old deprecated
-        functionality with the OPENSSL_NO_DEPRECATED macro or the
-        'no-deprecated' argument to the config and Configure scripts.
-      o Constification of all ASN.1 conversion functions, and other
-        affected functions.
-      o Improved platform support for PowerPC.
-      o New FIPS 180-2 algorithms (SHA-224, -256, -384 and -512).
-      o New X509_VERIFY_PARAM structure to support parametrisation
-        of X.509 path validation.
-      o Major overhaul of RC4 performance on Intel P4, IA-64 and
-        AMD64.
-      o Changed the Configure script to have some algorithms disabled
-        by default.  Those can be explicitely enabled with the new
-        argument form 'enable-xxx'.
-      o Change the default digest in 'openssl' commands from MD5 to
-        SHA-1.
-      o Added support for DTLS.
-      o New BIGNUM blinding.
-      o Added support for the RSA-PSS encryption scheme
-      o Added support for the RSA X.931 padding.
-      o Added support for BSD sockets on NetWare.
-      o Added support for files larger than 2GB.
-      o Added initial support for Win64.
-      o Added alternate pkg-config files.
-
-  Major changes between OpenSSL 0.9.7k and OpenSSL 0.9.7l:
-
-      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
-      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
-
-  Major changes between OpenSSL 0.9.7j and OpenSSL 0.9.7k:
-
-      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
-
-  Major changes between OpenSSL 0.9.7i and OpenSSL 0.9.7j:
-
-      o Visual C++ 2005 fixes.
-      o Update Windows build system for FIPS.
-
-  Major changes between OpenSSL 0.9.7h and OpenSSL 0.9.7i:
-
-      o Give EVP_MAX_MD_SIZE it's old value, except for a FIPS build.
-
-  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.7h:
-
-      o Fix SSL 2.0 Rollback, CVE-2005-2969
-      o Allow use of fixed-length exponent on DSA signing
-      o Default fixed-window RSA, DSA, DH private-key operations
-
-  Major changes between OpenSSL 0.9.7f and OpenSSL 0.9.7g:
-
-      o More compilation issues fixed.
-      o Adaptation to more modern Kerberos API.
-      o Enhanced or corrected configuration for Solaris64, Mingw and Cygwin.
-      o Enhanced x86_64 assembler BIGNUM module.
-      o More constification.
-      o Added processing of proxy certificates (RFC 3820).
-
-  Major changes between OpenSSL 0.9.7e and OpenSSL 0.9.7f:
-
-      o Several compilation issues fixed.
-      o Many memory allocation failure checks added.
-      o Improved comparison of X509 Name type.
-      o Mandatory basic checks on certificates.
-      o Performance improvements.
-
-  Major changes between OpenSSL 0.9.7d and OpenSSL 0.9.7e:
-
-      o Fix race condition in CRL checking code.
-      o Fixes to PKCS#7 (S/MIME) code.
-
-  Major changes between OpenSSL 0.9.7c and OpenSSL 0.9.7d:
-
-      o Security: Fix Kerberos ciphersuite SSL/TLS handshaking bug
-      o Security: Fix null-pointer assignment in do_change_cipher_spec()
-      o Allow multiple active certificates with same subject in CA index
-      o Multiple X509 verification fixes
-      o Speed up HMAC and other operations
-
-  Major changes between OpenSSL 0.9.7b and OpenSSL 0.9.7c:
-
-      o Security: fix various ASN1 parsing bugs.
-      o New -ignore_err option to OCSP utility.
-      o Various interop and bug fixes in S/MIME code.
-      o SSL/TLS protocol fix for unrequested client certificates.
-
-  Major changes between OpenSSL 0.9.7a and OpenSSL 0.9.7b:
-
-      o Security: counter the Klima-Pokorny-Rosa extension of
-        Bleichbacher's attack 
-      o Security: make RSA blinding default.
-      o Configuration: Irix fixes, AIX fixes, better mingw support.
-      o Support for new platforms: linux-ia64-ecc.
-      o Build: shared library support fixes.
-      o ASN.1: treat domainComponent correctly.
-      o Documentation: fixes and additions.
-
-  Major changes between OpenSSL 0.9.7 and OpenSSL 0.9.7a:
-
-      o Security: Important security related bugfixes.
-      o Enhanced compatibility with MIT Kerberos.
-      o Can be built without the ENGINE framework.
-      o IA32 assembler enhancements.
-      o Support for new platforms: FreeBSD/IA64 and FreeBSD/Sparc64.
-      o Configuration: the no-err option now works properly.
-      o SSL/TLS: now handles manual certificate chain building.
-      o SSL/TLS: certain session ID malfunctions corrected.
-
-  Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.7:
-
-      o New library section OCSP.
-      o Complete rewrite of ASN1 code.
-      o CRL checking in verify code and openssl utility.
-      o Extension copying in 'ca' utility.
-      o Flexible display options in 'ca' utility.
-      o Provisional support for international characters with UTF8.
-      o Support for external crypto devices ('engine') is no longer
-        a separate distribution.
-      o New elliptic curve library section.
-      o New AES (Rijndael) library section.
-      o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit,
-        Linux x86_64, Linux 64-bit on Sparc v9
-      o Extended support for some platforms: VxWorks
-      o Enhanced support for shared libraries.
-      o Now only builds PIC code when shared library support is requested.
-      o Support for pkg-config.
-      o Lots of new manuals.
-      o Makes symbolic links to or copies of manuals to cover all described
-        functions.
-      o Change DES API to clean up the namespace (some applications link also
-        against libdes providing similar functions having the same name).
-        Provide macros for backward compatibility (will be removed in the
-        future).
-      o Unify handling of cryptographic algorithms (software and engine)
-        to be available via EVP routines for asymmetric and symmetric ciphers.
-      o NCONF: new configuration handling routines.
-      o Change API to use more 'const' modifiers to improve error checking
-        and help optimizers.
-      o Finally remove references to RSAref.
-      o Reworked parts of the BIGNUM code.
-      o Support for new engines: Broadcom ubsec, Accelerated Encryption
-        Processing, IBM 4758.
-      o A few new engines added in the demos area.
-      o Extended and corrected OID (object identifier) table.
-      o PRNG: query at more locations for a random device, automatic query for
-        EGD style random sources at several locations.
-      o SSL/TLS: allow optional cipher choice according to server's preference.
-      o SSL/TLS: allow server to explicitly set new session ids.
-      o SSL/TLS: support Kerberos cipher suites (RFC2712).
-	Only supports MIT Kerberos for now.
-      o SSL/TLS: allow more precise control of renegotiations and sessions.
-      o SSL/TLS: add callback to retrieve SSL/TLS messages.
-      o SSL/TLS: support AES cipher suites (RFC3268).
-
-  Major changes between OpenSSL 0.9.6j and OpenSSL 0.9.6k:
-
-      o Security: fix various ASN1 parsing bugs.
-      o SSL/TLS protocol fix for unrequested client certificates.
-
-  Major changes between OpenSSL 0.9.6i and OpenSSL 0.9.6j:
-
-      o Security: counter the Klima-Pokorny-Rosa extension of
-        Bleichbacher's attack 
-      o Security: make RSA blinding default.
-      o Build: shared library support fixes.
-
-  Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
-
-      o Important security related bugfixes.
-
-  Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:
-
-      o New configuration targets for Tandem OSS and A/UX.
-      o New OIDs for Microsoft attributes.
-      o Better handling of SSL session caching.
-      o Better comparison of distinguished names.
-      o Better handling of shared libraries in a mixed GNU/non-GNU environment.
-      o Support assembler code with Borland C.
-      o Fixes for length problems.
-      o Fixes for uninitialised variables.
-      o Fixes for memory leaks, some unusual crashes and some race conditions.
-      o Fixes for smaller building problems.
-      o Updates of manuals, FAQ and other instructive documents.
-
-  Major changes between OpenSSL 0.9.6f and OpenSSL 0.9.6g:
-
-      o Important building fixes on Unix.
-
-  Major changes between OpenSSL 0.9.6e and OpenSSL 0.9.6f:
-
-      o Various important bugfixes.
-
-  Major changes between OpenSSL 0.9.6d and OpenSSL 0.9.6e:
-
-      o Important security related bugfixes.
-      o Various SSL/TLS library bugfixes.
-
-  Major changes between OpenSSL 0.9.6c and OpenSSL 0.9.6d:
-
-      o Various SSL/TLS library bugfixes.
-      o Fix DH parameter generation for 'non-standard' generators.
-
-  Major changes between OpenSSL 0.9.6b and OpenSSL 0.9.6c:
-
-      o Various SSL/TLS library bugfixes.
-      o BIGNUM library fixes.
-      o RSA OAEP and random number generation fixes.
-      o Object identifiers corrected and added.
-      o Add assembler BN routines for IA64.
-      o Add support for OS/390 Unix, UnixWare with gcc, OpenUNIX 8,
-        MIPS Linux; shared library support for Irix, HP-UX.
-      o Add crypto accelerator support for AEP, Baltimore SureWare,
-        Broadcom and Cryptographic Appliance's keyserver
-        [in 0.9.6c-engine release].
-
-  Major changes between OpenSSL 0.9.6a and OpenSSL 0.9.6b:
-
-      o Security fix: PRNG improvements.
-      o Security fix: RSA OAEP check.
-      o Security fix: Reinsert and fix countermeasure to Bleichbacher's
-        attack.
-      o MIPS bug fix in BIGNUM.
-      o Bug fix in "openssl enc".
-      o Bug fix in X.509 printing routine.
-      o Bug fix in DSA verification routine and DSA S/MIME verification.
-      o Bug fix to make PRNG thread-safe.
-      o Bug fix in RAND_file_name().
-      o Bug fix in compatibility mode trust settings.
-      o Bug fix in blowfish EVP.
-      o Increase default size for BIO buffering filter.
-      o Compatibility fixes in some scripts.
-
-  Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.6a:
-
-      o Security fix: change behavior of OpenSSL to avoid using
-        environment variables when running as root.
-      o Security fix: check the result of RSA-CRT to reduce the
-        possibility of deducing the private key from an incorrectly
-        calculated signature.
-      o Security fix: prevent Bleichenbacher's DSA attack.
-      o Security fix: Zero the premaster secret after deriving the
-        master secret in DH ciphersuites.
-      o Reimplement SSL_peek(), which had various problems.
-      o Compatibility fix: the function des_encrypt() renamed to
-        des_encrypt1() to avoid clashes with some Unixen libc.
-      o Bug fixes for Win32, HP/UX and Irix.
-      o Bug fixes in BIGNUM, SSL, PKCS#7, PKCS#12, X.509, CONF and
-        memory checking routines.
-      o Bug fixes for RSA operations in threaded environments.
-      o Bug fixes in misc. openssl applications.
-      o Remove a few potential memory leaks.
-      o Add tighter checks of BIGNUM routines.
-      o Shared library support has been reworked for generality.
-      o More documentation.
-      o New function BN_rand_range().
-      o Add "-rand" option to openssl s_client and s_server.
-
-  Major changes between OpenSSL 0.9.5a and OpenSSL 0.9.6:
-
-      o Some documentation for BIO and SSL libraries.
-      o Enhanced chain verification using key identifiers.
-      o New sign and verify options to 'dgst' application.
-      o Support for DER and PEM encoded messages in 'smime' application.
-      o New 'rsautl' application, low level RSA utility.
-      o MD4 now included.
-      o Bugfix for SSL rollback padding check.
-      o Support for external crypto devices [1].
-      o Enhanced EVP interface.
-
-    [1] The support for external crypto devices is currently a separate
-        distribution.  See the file README.ENGINE.
-
   Major changes between OpenSSL 0.9.5 and OpenSSL 0.9.5a:
 
       o Bug fixes for Win32, SuSE Linux, NeXTSTEP and FreeBSD 2.2.8 

Netware/build.bat

@@ -1,209 +0,0 @@
-@echo off
-
-rem ========================================================================
-rem   Batch file to automate building OpenSSL for NetWare.
-rem
-rem   usage:
-rem      build [target] [debug opts] [assembly opts] [configure opts]
-rem
-rem      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
-rem                    - "netware-libc" - LibC NKS NetWare build (WinSock Sockets)
-rem                    - "netware-libc-bsdsock" - LibC NKS NetWare build (BSD Sockets)
-rem 
-rem      debug opts    - "debug"  - build debug
-rem
-rem      assembly opts - "nw-mwasm" - use Metrowerks assembler
-rem                    - "nw-nasm"  - use NASM assembler
-rem                    - "no-asm"   - don't use assembly
-rem
-rem      configure opts- all unrecognized arguments are passed to the
-rem                       perl configure script
-rem
-rem   If no arguments are specified the default is to build non-debug with
-rem   no assembly.  NOTE: there is no default BLD_TARGET.
-rem
-
-
-
-rem   No assembly is the default - Uncomment section below to change
-rem   the assembler default
-set ASM_MODE=
-set ASSEMBLER=
-set NO_ASM=no-asm
-
-rem   Uncomment to default to the Metrowerks assembler
-rem set ASM_MODE=nw-mwasm
-rem set ASSEMBLER=Metrowerks
-rem set NO_ASM=
-
-rem   Uncomment to default to the NASM assembler
-rem set ASM_MODE=nw-nasm
-rem set ASSEMBLER=NASM
-rem set NO_ASM=
-
-rem   No default Bld target
-set BLD_TARGET=no_target
-rem set BLD_TARGET=netware-clib
-rem set BLD_TARGET=netware-libc
-
-
-rem   Default to build non-debug
-set DEBUG=
-                                    
-rem   Uncomment to default to debug build
-rem set DEBUG=debug
-
-
-set CONFIG_OPTS=
-set ARG_PROCESSED=NO
-
-
-rem   Process command line args
-:opts
-if "a%1" == "a" goto endopt
-if "%1" == "no-asm"   set NO_ASM=no-asm
-if "%1" == "no-asm"   set ARG_PROCESSED=YES
-if "%1" == "debug"    set DEBUG=debug
-if "%1" == "debug"    set ARG_PROCESSED=YES
-if "%1" == "nw-nasm"  set ASM_MODE=nw-nasm
-if "%1" == "nw-nasm"  set ASSEMBLER=NASM
-if "%1" == "nw-nasm"  set NO_ASM=
-if "%1" == "nw-nasm"  set ARG_PROCESSED=YES
-if "%1" == "nw-mwasm" set ASM_MODE=nw-mwasm
-if "%1" == "nw-mwasm" set ASSEMBLER=Metrowerks
-if "%1" == "nw-mwasm"  set NO_ASM=
-if "%1" == "nw-mwasm" set ARG_PROCESSED=YES
-if "%1" == "netware-clib" set BLD_TARGET=netware-clib
-if "%1" == "netware-clib" set ARG_PROCESSED=YES
-if "%1" == "netware-libc" set BLD_TARGET=netware-libc
-if "%1" == "netware-libc" set ARG_PROCESSED=YES
-if "%1" == "netware-libc-bsdsock" set BLD_TARGET=netware-libc-bsdsock
-if "%1" == "netware-libc-bsdsock" set ARG_PROCESSED=YES
-
-rem   If we didn't recognize the argument, consider it an option for config
-if "%ARG_PROCESSED%" == "NO" set CONFIG_OPTS=%CONFIG_OPTS% %1
-if "%ARG_PROCESSED%" == "YES" set ARG_PROCESSED=NO
-
-shift
-goto opts
-:endopt
-
-rem make sure a valid BLD_TARGET was specified
-if "%BLD_TARGET%" == "no_target" goto no_target
-
-rem build the nlm make file name which includes target and debug info
-set NLM_MAKE=
-if "%BLD_TARGET%" == "netware-clib" set NLM_MAKE=netware\nlm_clib
-if "%BLD_TARGET%" == "netware-libc" set NLM_MAKE=netware\nlm_libc
-if "%BLD_TARGET%" == "netware-libc-bsdsock" set NLM_MAKE=netware\nlm_libc_bsdsock
-if "%DEBUG%" == "" set NLM_MAKE=%NLM_MAKE%.mak
-if "%DEBUG%" == "debug" set NLM_MAKE=%NLM_MAKE%_dbg.mak
-
-if "%NO_ASM%" == "no-asm" set ASM_MODE=
-if "%NO_ASM%" == "no-asm" set ASSEMBLER=
-if "%NO_ASM%" == "no-asm" set CONFIG_OPTS=%CONFIG_OPTS% no-asm
-if "%NO_ASM%" == "no-asm" goto do_config
-
-
-rem ==================================================
-echo Generating x86 for %ASSEMBLER% assembler
-
-echo Bignum
-cd crypto\bn\asm
-perl x86.pl %ASM_MODE% > bn-nw.asm
-cd ..\..\..
-
-echo DES
-cd crypto\des\asm
-perl des-586.pl %ASM_MODE% > d-nw.asm
-cd ..\..\..
-
-echo "crypt(3)"
-
-cd crypto\des\asm
-perl crypt586.pl %ASM_MODE% > y-nw.asm
-cd ..\..\..
-
-echo Blowfish
-
-cd crypto\bf\asm
-perl bf-586.pl %ASM_MODE% > b-nw.asm
-cd ..\..\..
-
-echo CAST5
-cd crypto\cast\asm
-perl cast-586.pl %ASM_MODE% > c-nw.asm
-cd ..\..\..
-
-echo RC4
-cd crypto\rc4\asm
-perl rc4-586.pl %ASM_MODE% > r4-nw.asm
-cd ..\..\..
-
-echo MD5
-cd crypto\md5\asm
-perl md5-586.pl %ASM_MODE% > m5-nw.asm
-cd ..\..\..
-
-echo SHA1
-cd crypto\sha\asm
-perl sha1-586.pl %ASM_MODE% > s1-nw.asm
-cd ..\..\..
-
-echo RIPEMD160
-cd crypto\ripemd\asm
-perl rmd-586.pl %ASM_MODE% > rm-nw.asm
-cd ..\..\..
-
-echo RC5\32
-cd crypto\rc5\asm
-perl rc5-586.pl %ASM_MODE% > r5-nw.asm
-cd ..\..\..
-
-rem ===============================================================
-rem
-:do_config
-
-echo .
-echo configure options: %CONFIG_OPTS% %BLD_TARGET%
-echo .
-perl configure %CONFIG_OPTS% %BLD_TARGET%
-
-perl util\mkfiles.pl >MINFO
-
-echo .
-echo mk1mf.pl options: %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET%
-echo .
-perl util\mk1mf.pl %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET% >%NLM_MAKE%
-
-echo The makefile "%NLM_MAKE%" has been created use your maketool to
-echo build (ex: gmake -f %NLM_MAKE%)
-goto end
-
-rem ===============================================================
-rem
-:no_target
-echo .
-echo .  No build target specified!!!
-echo .
-echo .  usage: build [target] [debug opts] [assembly opts] [configure opts]
-echo .
-echo .     target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
-echo .                   - "netware-libc" - LibC NKS NetWare build (WinSock Sockets)
-echo .                   - "netware-libc-bsdsock" - LibC NKS NetWare build (BSD Sockets)
-echo .
-echo .     debug opts    - "debug"  - build debug
-echo .
-echo .     assembly opts - "nw-mwasm" - use Metrowerks assembler
-echo .                     "nw-nasm"  - use NASM assembler
-echo .                     "no-asm"   - don't use assembly
-echo .
-echo .     configure opts- all unrecognized arguments are passed to the
-echo .                      perl configure script
-echo .
-echo .  If no debug or assembly opts are specified the default is to build
-echo .  non-debug without assembly
-echo .
-
-        
-:end        

Netware/cpy_tests.bat

@@ -1,112 +0,0 @@
-@echo off
-
-rem   Batch file to copy OpenSSL stuff to a NetWare server for testing
-
-rem   This batch file will create an "opensssl" directory at the root of the
-rem   specified NetWare drive and copy the required files to run the tests.
-rem   It should be run from inside the "openssl\netware" subdirectory.
-
-rem   Usage:
-rem      cpy_tests.bat <test subdirectory> <NetWare drive>
-rem          <test subdirectory> - out_nw.dbg | out_nw
-rem          <NetWare drive> - any mapped drive letter
-rem
-rem      example ( copy from debug build to m: dirve ):
-rem              cpy_tests.bat out_nw.dbg m:
-rem
-rem      CAUTION:  If a directory named OpenSSL exists on the target drive
-rem                it will be deleted first.
-
-
-if "%1" == "" goto usage
-if "%2" == "" goto usage
-
-rem   Assume running in \openssl directory unless cpy_tests.bat exists then
-rem   it must be the \openssl\netware directory
-set loc=.
-if exist cpy_tests.bat set loc=..
-
-rem   make sure the local build subdirectory specified is valid
-if not exist %loc%\%1\NUL goto invalid_dir
-
-rem   make sure target drive is valid
-if not exist %2\NUL goto invalid_drive
-
-rem   If an OpenSSL directory exists on the target drive, remove it
-if exist %2\openssl\NUL goto remove_openssl
-goto do_copy
-
-:remove_openssl
-echo .
-echo OpenSSL directory exists on %2 - it will be removed!
-pause
-rmdir %2\openssl /s /q
-
-:do_copy
-rem   make an "openssl" directory and others at the root of the NetWare drive
-mkdir %2\openssl
-mkdir %2\openssl\test_out
-mkdir %2\openssl\apps
-mkdir %2\openssl\certs
-mkdir %2\openssl\test
-
-
-rem   copy the test nlms
-copy %loc%\%1\*.nlm %2\openssl\
-
-rem   copy the test perl script
-copy %loc%\netware\do_tests.pl %2\openssl\
-
-rem   copy the certs directory stuff
-xcopy %loc%\certs\*.*         %2\openssl\certs\ /s
-
-rem   copy the test directory stuff
-copy %loc%\test\CAss.cnf      %2\openssl\test\
-copy %loc%\test\Uss.cnf       %2\openssl\test\
-copy %loc%\test\pkcs7.pem     %2\openssl\test\
-copy %loc%\test\pkcs7-1.pem   %2\openssl\test\
-copy %loc%\test\testcrl.pem   %2\openssl\test\
-copy %loc%\test\testp7.pem    %2\openssl\test\
-copy %loc%\test\testreq2.pem  %2\openssl\test\
-copy %loc%\test\testrsa.pem   %2\openssl\test\
-copy %loc%\test\testsid.pem   %2\openssl\test\
-copy %loc%\test\testx509.pem  %2\openssl\test\
-copy %loc%\test\v3-cert1.pem  %2\openssl\test\
-copy %loc%\test\v3-cert2.pem  %2\openssl\test\
-
-rem   copy the apps directory stuff
-copy %loc%\apps\client.pem    %2\openssl\apps\
-copy %loc%\apps\server.pem    %2\openssl\apps\
-copy %loc%\apps\openssl.cnf   %2\openssl\apps\
-
-echo .
-echo Tests copied
-echo Run the test script at the console by typing:
-echo     "Perl \openssl\do_tests.pl"
-echo .
-echo Make sure the Search path includes the OpenSSL subdirectory
-
-goto end
-
-:invalid_dir
-echo.
-echo Invalid build directory specified: %1
-echo.
-goto usage
-
-:invalid_drive
-echo.
-echo Invalid drive: %2
-echo.
-goto usage
-
-:usage
-echo.
-echo usage: cpy_tests.bat [test subdirectory] [NetWare drive]
-echo     [test subdirectory] - out_nw_clib.dbg, out_nw_libc.dbg, etc. 
-echo     [NetWare drive]     - any mapped drive letter
-echo.
-echo example: cpy_test out_nw_clib.dbg M:
-echo  (copy from clib debug build area to M: drive)
-
-:end

Netware/do_tests.pl

@@ -1,594 +0,0 @@
-# perl script to run OpenSSL tests
-
-
-my $base_path      = "\\openssl";
-
-my $output_path    = "$base_path\\test_out";
-my $cert_path      = "$base_path\\certs";
-my $test_path      = "$base_path\\test";
-my $app_path       = "$base_path\\apps";
-
-my $tmp_cert       = "$output_path\\cert.tmp";
-my $OpenSSL_config = "$app_path\\openssl.cnf";
-my $log_file       = "$output_path\\tests.log";
-
-my $pause = 0;
-
-
-#  process the command line args to see if they wanted us to pause
-#  between executing each command
-foreach $i (@ARGV)
-{
-   if ($i =~ /^-p$/)
-   { $pause=1; }
-}
-
-
-
-main();
-
-
-############################################################################
-sub main()
-{
-   # delete all the output files in the output directory
-   unlink <$output_path\\*.*>;
-
-   # open the main log file 
-   open(OUT, ">$log_file") || die "unable to open $log_file\n";
-
-   
-   algorithm_tests();
-   encryption_tests();
-   pem_tests();
-   verify_tests();
-   ca_tests();
-   ssl_tests();
-
-   close(OUT);
-
-   print("\nCompleted running tests.\n\n");
-   print("Check log file for errors: $log_file\n");
-}
-
-############################################################################
-sub algorithm_tests
-{
-   my $i;
-   my $outFile;
-   my @tests = ( rsa_test, destest, ideatest, bftest, shatest, sha1test,
-                 md5test, dsatest, md2test, mdc2test, rc2test, rc4test, randtest,
-                 dhtest, exptest );
-
-   print( "\nRUNNING CRYPTO ALGORITHM TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "CRYPTO ALGORITHM TESTS:\n\n");
-
-   foreach $i (@tests)
-   {
-      if (-e "$base_path\\$i.nlm")
-	  {
-         $outFile = "$output_path\\$i.out";
-         system("$i > $outFile");
-         log_desc("Test: $i\.nlm:");
-         log_output("", $outFile );
-	  }
-	  else
-	  {
-         log_desc("Test: $i\.nlm: file not found");
-	  }
-   }
-}
-
-############################################################################
-sub encryption_tests
-{
-   my $i;
-   my $outFile;
-   my @enc_tests = ( "enc", "rc4", "des-cfb", "des-ede-cfb", "des-ede3-cfb",
-                     "des-ofb", "des-ede-ofb", "des-ede3-ofb",
-                     "des-ecb", "des-ede", "des-ede3", "des-cbc",
-                     "des-ede-cbc", "des-ede3-cbc", "idea-ecb", "idea-cfb",
-                     "idea-ofb", "idea-cbc", "rc2-ecb", "rc2-cfb",
-                     "rc2-ofb", "rc2-cbc", "bf-ecb", "bf-cfb",
-                     "bf-ofb", "bf-cbc" );
-
-   my $input = "$base_path\\do_tests.pl";
-   my $cipher = "$output_path\\cipher.out";
-   my $clear = "$output_path\\clear.out";
-
-   print( "\nRUNNING ENCRYPTION & DECRYPTION TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "FILE ENCRYPTION & DECRYPTION TESTS:\n\n");
-
-   foreach $i (@enc_tests)
-   {
-      log_desc("Testing: $i");
-
-      # do encryption
-      $outFile = "$output_path\\enc.out";
-      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher > $outFile" );
-      log_output("Encrypting: $input --> $cipher", $outFile);
-
-      # do decryption
-      $outFile = "$output_path\\dec.out";
-      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear > $outFile");
-      log_output("Decrypting: $cipher --> $clear", $outFile);
-
-      # compare files
-      $x = compare_files( $input, $clear, 1);
-      if ( $x == 0 )
-      {
-         print( "SUCCESS - files match: $input, $clear\n");
-         print( OUT "SUCCESS - files match: $input, $clear\n");
-      }
-      else
-      {
-         print( "ERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-
-      do_wait();
-
-      # Now do the same encryption but use Base64
-
-      # do encryption B64
-      $outFile = "$output_path\\B64enc.out";
-      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher > $outFile");
-      log_output("Encrypting(B64): $cipher --> $clear", $outFile);
-
-      # do decryption B64
-      $outFile = "$output_path\\B64dec.out";
-      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear > $outFile");
-      log_output("Decrypting(B64): $cipher --> $clear", $outFile);
-
-      # compare files
-      $x = compare_files( $input, $clear, 1);
-      if ( $x == 0 )
-      {
-         print( "SUCCESS - files match: $input, $clear\n");
-         print( OUT "SUCCESS - files match: $input, $clear\n");
-      }
-      else
-      {
-         print( "ERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-
-      do_wait();
-
-   } # end foreach
-
-   # delete the temporary files
-   unlink($cipher);
-   unlink($clear);
-}
-
-
-############################################################################
-sub pem_tests
-{
-   my $i;
-   my $tmp_out;
-   my $outFile = "$output_path\\pem.out";
-
-   my %pem_tests = (
-         "crl"      => "testcrl.pem",
-          "pkcs7"   => "testp7.pem",
-          "req"     => "testreq2.pem",
-          "rsa"     => "testrsa.pem",
-          "x509"    => "testx509.pem",
-          "x509"    => "v3-cert1.pem",
-          "sess_id" => "testsid.pem"  );
-
-
-   print( "\nRUNNING PEM TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "PEM TESTS:\n\n");
-
-   foreach $i (keys(%pem_tests))
-   {
-      log_desc( "Testing: $i");
-
-      my $input = "$test_path\\$pem_tests{$i}";
-
-      $tmp_out = "$output_path\\$pem_tests{$i}";
-
-      if ($i ne "req" )
-      {
-         system("openssl2 $i -in $input -out $tmp_out > $outFile");
-         log_output( "openssl2 $i -in $input -out $tmp_out", $outFile);
-      }
-      else
-      {
-         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config > $outFile");
-         log_output( "openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config", $outFile );
-      }
-
-      $x = compare_files( $input, $tmp_out);
-      if ( $x == 0 )
-      {
-         print( "SUCCESS - files match: $input, $tmp_out\n");
-         print( OUT "SUCCESS - files match: $input, $tmp_out\n");
-      }
-      else
-      {
-         print( "ERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-      do_wait();
-
-   } # end foreach
-}
-
-
-############################################################################
-sub verify_tests
-{
-   my $i;
-   my $outFile = "$output_path\\verify.out";
-
-   my @cert_files = <$cert_path\\*.pem>;
-
-   print( "\nRUNNING VERIFY TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "VERIFY TESTS:\n\n");
-
-   make_tmp_cert_file();
-
-   foreach $i (@cert_files)
-   {
-      system("openssl2 verify -CAfile $tmp_cert $i >$outFile");
-      log_desc("Verifying cert: $i");
-      log_output("openssl2 verify -CAfile $tmp_cert $i", $outFile);
-   }
-}
-
-
-############################################################################
-sub ssl_tests
-{
-   my $outFile = "$output_path\\ssl_tst.out";
-   my($CAcert) = "$output_path\\certCA.ss";
-   my($Ukey)   = "$output_path\\keyU.ss";
-   my($Ucert)  = "$output_path\\certU.ss";
-   my($ssltest)= "ssltest -key $Ukey -cert $Ucert -c_key $Ukey -c_cert $Ucert -CAfile $CAcert";
-
-   print( "\nRUNNING SSL TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "SSL TESTS:\n\n");
-
-   system("ssltest -ssl2 >$outFile");
-   log_desc("Testing sslv2:");
-   log_output("ssltest -ssl2", $outFile);
-
-   system("$ssltest -ssl2 -server_auth >$outFile");
-   log_desc("Testing sslv2 with server authentication:");
-   log_output("$ssltest -ssl2 -server_auth", $outFile);
-
-   system("$ssltest -ssl2 -client_auth >$outFile");
-   log_desc("Testing sslv2 with client authentication:");
-   log_output("$ssltest -ssl2 -client_auth", $outFile);
-
-   system("$ssltest -ssl2 -server_auth -client_auth >$outFile");
-   log_desc("Testing sslv2 with both client and server authentication:");
-   log_output("$ssltest -ssl2 -server_auth -client_auth", $outFile);
-
-   system("ssltest -ssl3 >$outFile");
-   log_desc("Testing sslv3:");
-   log_output("ssltest -ssl3", $outFile);
-
-   system("$ssltest -ssl3 -server_auth >$outFile");
-   log_desc("Testing sslv3 with server authentication:");
-   log_output("$ssltest -ssl3 -server_auth", $outFile);
-
-   system("$ssltest -ssl3 -client_auth >$outFile");
-   log_desc("Testing sslv3 with client authentication:");
-   log_output("$ssltest -ssl3 -client_auth", $outFile);
-
-   system("$ssltest -ssl3 -server_auth -client_auth >$outFile");
-   log_desc("Testing sslv3 with both client and server authentication:");
-   log_output("$ssltest -ssl3 -server_auth -client_auth", $outFile);
-
-   system("ssltest >$outFile");
-   log_desc("Testing sslv2/sslv3:");
-   log_output("ssltest", $outFile);
-
-   system("$ssltest -server_auth >$outFile");
-   log_desc("Testing sslv2/sslv3 with server authentication:");
-   log_output("$ssltest -server_auth", $outFile);
-
-   system("$ssltest -client_auth >$outFile");
-   log_desc("Testing sslv2/sslv3 with client authentication:");
-   log_output("$ssltest -client_auth ", $outFile);
-
-   system("$ssltest -server_auth -client_auth >$outFile");
-   log_desc("Testing sslv2/sslv3 with both client and server authentication:");
-   log_output("$ssltest -server_auth -client_auth", $outFile);
-
-   system("ssltest -bio_pair -ssl2 >$outFile");
-   log_desc("Testing sslv2 via BIO pair:");
-   log_output("ssltest -bio_pair -ssl2", $outFile);
-
-   system("ssltest -bio_pair -dhe1024dsa -v >$outFile");
-   log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
-   log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
-
-   system("$ssltest -bio_pair -ssl2 -server_auth >$outFile");
-   log_desc("Testing sslv2 with server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl2 -server_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl2 -client_auth >$outFile");
-   log_desc("Testing sslv2 with client authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl2 -client_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl2 -server_auth -client_auth >$outFile");
-   log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl2 -server_auth -client_auth", $outFile);
-
-   system("ssltest -bio_pair -ssl3 >$outFile");
-   log_desc("Testing sslv3 via BIO pair:");
-   log_output("ssltest -bio_pair -ssl3", $outFile);
-
-   system("$ssltest -bio_pair -ssl3 -server_auth >$outFile");
-   log_desc("Testing sslv3 with server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl3 -server_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl3 -client_auth >$outFile");
-   log_desc("Testing sslv3 with client authentication  via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl3 -client_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl3 -server_auth -client_auth >$outFile");
-   log_desc("Testing sslv3 with both client and server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl3 -server_auth -client_auth", $outFile);
-
-   system("ssltest -bio_pair >$outFile");
-   log_desc("Testing sslv2/sslv3 via BIO pair:");
-   log_output("ssltest -bio_pair", $outFile);
-
-   system("$ssltest -bio_pair -server_auth >$outFile");
-   log_desc("Testing sslv2/sslv3 with server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -server_auth", $outFile);
-
-   system("$ssltest -bio_pair -client_auth >$outFile");
-   log_desc("Testing sslv2/sslv3 with client authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -client_auth", $outFile);
-
-   system("$ssltest -bio_pair -server_auth -client_auth >$outFile");
-   log_desc("Testing sslv2/sslv3 with both client and server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -server_auth -client_auth", $outFile);
-}
-
-
-############################################################################
-sub ca_tests
-{
-   my $outFile = "$output_path\\ca_tst.out";
-
-   my($CAkey)     = "$output_path\\keyCA.ss";
-   my($CAcert)    = "$output_path\\certCA.ss";
-   my($CAserial)  = "$output_path\\certCA.srl";
-   my($CAreq)     = "$output_path\\reqCA.ss";
-   my($CAreq2)    = "$output_path\\req2CA.ss";
-
-   my($CAconf)    = "$test_path\\CAss.cnf";
-
-   my($Uconf)     = "$test_path\\Uss.cnf";
-
-   my($Ukey)      = "$output_path\\keyU.ss";
-   my($Ureq)      = "$output_path\\reqU.ss";
-   my($Ucert)     = "$output_path\\certU.ss";
-
-   print( "\nRUNNING CA TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "CA TESTS:\n");
-
-   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new >$outFile");
-   log_desc("Make a certificate request using req:");
-   log_output("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new", $outFile);
-
-   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey >$outFile");
-   log_desc("Convert the certificate request into a self signed certificate using x509:");
-   log_output("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey", $outFile);
-
-   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 >$outFile");
-   log_desc("Convert a certificate into a certificate request using 'x509':");
-   log_output("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2", $outFile);
-
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout >$outFile");
-   log_output("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout", $outFile);
-
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout >$outFile");
-   log_output( "openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout", $outFile);
-
-   system("openssl2 verify -CAfile $CAcert $CAcert >$outFile");
-   log_output("openssl2 verify -CAfile $CAcert $CAcert", $outFile);
-
-   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new >$outFile");
-   log_desc("Make another certificate request using req:");
-   log_output("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new", $outFile);
-
-   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial >$outFile");
-   log_desc("Sign certificate request with the just created CA via x509:");
-   log_output("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial", $outFile);
-
-   system("openssl2 verify -CAfile $CAcert $Ucert >$outFile");
-   log_output("openssl2 verify -CAfile $CAcert $Ucert", $outFile);
-
-   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert >$outFile");
-   log_desc("Certificate details");
-   log_output("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert", $outFile);
-
-   print(OUT "-- \n");
-   print(OUT "The generated CA certificate is $CAcert\n");
-   print(OUT "The generated CA private key is $CAkey\n");
-   print(OUT "The current CA signing serial number is in $CAserial\n");
-
-   print(OUT "The generated user certificate is $Ucert\n");
-   print(OUT "The generated user private key is $Ukey\n");
-   print(OUT "--\n");
-}
-
-############################################################################
-sub log_output( $ $ )
-{
-   my( $desc, $file ) = @_;
-   my($error) = 0;
-   my($key);
-   my($msg);
-
-   if ($desc)
-   {
-      print("$desc\n");
-      print(OUT "$desc\n");
-   }
-
-      # loop waiting for test program to complete
-   while ( stat($file) == 0)
-      { print(". "); sleep(1); }
-
-
-      # copy test output to log file
-   open(IN, "<$file");
-   while (<IN>)
-   { 
-      print(OUT $_); 
-      if ( $_ =~ /ERROR/ )
-      {
-         $error = 1;
-      }
-   }
-      # close and delete the temporary test output file
-   close(IN);
-   unlink($file);
-
-   if ( $error == 0 )
-   {
-      $msg = "Test Succeeded";
-   }
-   else
-   {
-      $msg = "Test Failed";
-   }
-
-   print(OUT "$msg\n");
-
-   if ($pause)
-   {
-      print("$msg - press ENTER to continue...");
-      $key = getc;
-      print("\n");
-   }
-      
-      # Several of the testing scripts run a loop loading the 
-      # same NLM with different options.
-      # On slow NetWare machines there appears to be some delay in the 
-      # OS actually unloading the test nlms and the OS complains about.
-      # the NLM already being loaded.  This additional pause is to 
-      # to help provide a little more time for unloading before trying to 
-      # load again.
-   sleep(1);
-}
-
-
-############################################################################
-sub log_desc( $ )
-{
-   my( $desc ) = @_;
-
-   print("\n");
-   print("$desc\n");
-
-   print(OUT "\n");
-   print(OUT "$desc\n");
-   print(OUT "======================================\n");
-}
-
-############################################################################
-sub compare_files( $ $ $ )
-{
-   my( $file1, $file2, $binary ) = @_;
-   my( $n1, $n2, $b1, $b2 );
-   my($ret) = 1;
-
-   open(IN0, $file1) || die "\nunable to open $file1\n";
-   open(IN1, $file2) || die "\nunable to open $file2\n";
-
-  if ($binary)
-  {
-      binmode IN0;
-      binmode IN1;
-  }
-
-   for (;;)
-   {
-      $n1 = read(IN0, $b1, 512);
-      $n2 = read(IN1, $b2, 512);
-
-      if ($n1 != $n2) {last;}
-      if ($b1 != $b2) {last;}
-
-      if ($n1 == 0)
-      {
-         $ret = 0;
-         last;
-      }
-   }
-   close(IN0);
-   close(IN1);
-   return($ret);
-}
-
-############################################################################
-sub do_wait()
-{
-   my($key);
-
-   if ($pause)
-   {
-      print("Press ENTER to continue...");
-      $key = getc;
-      print("\n");
-   }
-}
-
-
-############################################################################
-sub make_tmp_cert_file()
-{
-   my @cert_files = <$cert_path\\*.pem>;
-
-      # delete the file if it already exists
-   unlink($tmp_cert);
-
-   open( TMP_CERT, ">$tmp_cert") || die "\nunable to open $tmp_cert\n";
-
-   print("building temporary cert file\n");
-   
-   # create a temporary cert file that contains all the certs
-   foreach $i (@cert_files)
-   {
-      open( IN_CERT, $i ) || die "\nunable to open $i\n";
-
-      for(;;)
-      {
-         $n = sysread(IN_CERT, $data, 1024);
-
-         if ($n == 0)
-         {
-            close(IN_CERT);
-            last;
-         };
-
-         syswrite(TMP_CERT, $data, $n);
-      }
-   }
-
-   close( TMP_CERT );
-}

Netware/globals.txt

@@ -1,254 +0,0 @@
-An initial review of the OpenSSL code was done to determine how many 
-global variables where present.  The idea was to determine the amount of 
-work required to pull the globals into an instance data structure in 
-order to build a Library NLM for NetWare.  This file contains the results 
-of the review.  Each file is listed along with the globals in the file.  
-The initial review was done very quickly so this list is probably
-not a comprehensive list.
-
-
-cryptlib.c
-===========================================
-
-static STACK *app_locks=NULL;
-
-static STACK_OF(CRYPTO_dynlock) *dyn_locks=NULL;
-
-static void (MS_FAR *locking_callback)(int mode,int type,
-   const char *file,int line)=NULL;
-static int (MS_FAR *add_lock_callback)(int *pointer,int amount,
-   int type,const char *file,int line)=NULL;
-static unsigned long (MS_FAR *id_callback)(void)=NULL;
-static struct CRYPTO_dynlock_value *(MS_FAR *dynlock_create_callback)
-   (const char *file,int line)=NULL;
-static void (MS_FAR *dynlock_lock_callback)(int mode,
-   struct CRYPTO_dynlock_value *l, const char *file,int line)=NULL;
-static void (MS_FAR *dynlock_destroy_callback)(struct CRYPTO_dynlock_value *l,
-   const char *file,int line)=NULL;
-
-
-mem.c
-===========================================
-static int allow_customize = 1;      /* we provide flexible functions for */
-static int allow_customize_debug = 1;/* exchanging memory-related functions at
-
-/* may be changed as long as `allow_customize' is set */
-static void *(*malloc_locked_func)(size_t)  = malloc;
-static void (*free_locked_func)(void *)     = free;
-static void *(*malloc_func)(size_t)         = malloc;
-static void *(*realloc_func)(void *, size_t)= realloc;
-static void (*free_func)(void *)            = free;
-
-/* use default functions from mem_dbg.c */
-static void (*malloc_debug_func)(void *,int,const char *,int,int)
-   = CRYPTO_dbg_malloc;
-static void (*realloc_debug_func)(void *,void *,int,const char *,int,int)
-   = CRYPTO_dbg_realloc;
-static void (*free_debug_func)(void *,int) = CRYPTO_dbg_free;
-static void (*set_debug_options_func)(long) = CRYPTO_dbg_set_options;
-static long (*get_debug_options_func)(void) = CRYPTO_dbg_get_options;
-
-
-mem_dbg.c
-===========================================
-static int mh_mode=CRYPTO_MEM_CHECK_OFF;
-static unsigned long order = 0; /* number of memory requests */
-static LHASH *mh=NULL; /* hash-table of memory requests (address as key) */
-
-static LHASH *amih=NULL; /* hash-table with those app_mem_info_st's */
-static long options =             /* extra information to be recorded */
-static unsigned long disabling_thread = 0;
-
-
-err.c
-===========================================
-static LHASH *error_hash=NULL;
-static LHASH *thread_hash=NULL;
-
-several files have routines with static "init" to track if error strings
-   have been loaded ( may not want seperate error strings for each process )
-   The "init" variable can't be left "global" because the error has is a ptr
-   that is malloc'ed.  The malloc'ed error has is dependant on the "init"
-   vars.
-
-   files:
-      pem_err.c
-      cpt_err.c
-      pk12err.c
-      asn1_err.c
-      bio_err.c
-      bn_err.c
-      buf_err.c
-      comp_err.c
-      conf_err.c
-      cpt_err.c
-      dh_err.c
-      dsa_err.c
-      dso_err.c
-      evp_err.c
-      obj_err.c
-      pkcs7err.c
-      rand_err.c
-      rsa_err.c
-      rsar_err.c
-      ssl_err.c
-      x509_err.c
-      v3err.c
-		err.c
-
-These file have similar "init" globals but they are for other stuff not
-error strings:
-
-		bn_lib.c
-		ecc_enc.c
-		s23_clnt.c
-		s23_meth.c
-		s23_srvr.c
-		s2_clnt.c
-		s2_lib.c
-		s2_meth.c
-		s2_srvr.c
-		s3_clnt.c
-		s3_lib.c
-		s3_srvr.c
-		t1_clnt.c
-		t1_meth.c
-		t1_srvr.c
-
-rand_lib.c
-===========================================
-static RAND_METHOD *rand_meth= &rand_ssleay_meth;
-
-md_rand.c
-===========================================
-static int state_num=0,state_index=0;
-static unsigned char state[STATE_SIZE+MD_DIGEST_LENGTH];
-static unsigned char md[MD_DIGEST_LENGTH];
-static long md_count[2]={0,0};
-static double entropy=0;
-static int initialized=0;
-
-/* This should be set to 1 only when ssleay_rand_add() is called inside
-   an already locked state, so it doesn't try to lock and thereby cause
-   a hang.  And it should always be reset back to 0 before unlocking. */
-static int add_do_not_lock=0;
-
-obj_dat.c
-============================================
-static int new_nid=NUM_NID;
-static LHASH *added=NULL;
-
-b_sock.c
-===========================================
-static unsigned long BIO_ghbn_hits=0L;
-static unsigned long BIO_ghbn_miss=0L;
-static struct ghbn_cache_st
-   {
-   char name[129];
-   struct hostent *ent;
-   unsigned long order;
-   } ghbn_cache[GHBN_NUM];
-
-static int wsa_init_done=0;
-
-
-bio_lib.c
-===========================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *bio_meth=NULL;
-static int bio_meth_num=0;
-
-
-bn_lib.c
-========================================
-static int bn_limit_bits=0;
-static int bn_limit_num=8;        /* (1<<bn_limit_bits) */
-static int bn_limit_bits_low=0;
-static int bn_limit_num_low=8;    /* (1<<bn_limit_bits_low) */
-static int bn_limit_bits_high=0;
-static int bn_limit_num_high=8;   /* (1<<bn_limit_bits_high) */
-static int bn_limit_bits_mont=0;
-static int bn_limit_num_mont=8;   /* (1<<bn_limit_bits_mont) */
-
-conf_lib.c
-========================================
-static CONF_METHOD *default_CONF_method=NULL;
-
-dh_lib.c
-========================================
-static DH_METHOD *default_DH_method;
-static int dh_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dh_meth = NULL;
-
-dsa_lib.c
-========================================
-static DSA_METHOD *default_DSA_method;
-static int dsa_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dsa_meth = NULL;
-
-dso_lib.c
-========================================
-static DSO_METHOD *default_DSO_meth = NULL;
-
-rsa_lib.c
-========================================
-static RSA_METHOD *default_RSA_meth=NULL;
-static int rsa_meth_num=0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *rsa_meth=NULL;
-
-x509_trs.c
-=======================================
-static int (*default_trust)(int id, X509 *x, int flags) = obj_trust;
-static STACK_OF(X509_TRUST) *trtable = NULL;
-
-x509_req.c
-=======================================
-static int *ext_nids = ext_nid_list;
-
-o_names.c
-======================================
-static LHASH *names_lh=NULL;
-static STACK_OF(NAME_FUNCS) *name_funcs_stack;
-static int free_type;
-static int names_type_num=OBJ_NAME_TYPE_NUM;
-
-
-th-lock.c - NEED to add support for locking for NetWare
-==============================================
-static long *lock_count;
-(other platform specific globals)
-
-x_x509.c
-==============================================
-static int x509_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_meth = NULL;
-
-
-evp_pbe.c
-============================================
-static STACK *pbe_algs;
-
-evp_key.c
-============================================
-static char prompt_string[80];
-
-ssl_ciph.c
-============================================
-static STACK_OF(SSL_COMP) *ssl_comp_methods=NULL;
-
-ssl_lib.c
-=============================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_meth=NULL;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_ctx_meth=NULL;
-static int ssl_meth_num=0;
-static int ssl_ctx_meth_num=0;
-
-ssl_sess.c
-=============================================
-static int ssl_session_num=0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_session_meth=NULL;
-
-x509_vfy.c
-============================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_store_ctx_method=NULL;
-static int x509_store_ctx_num=0;
-

Netware/readme.txt

@@ -1,19 +0,0 @@
-
-Contents of the openssl\netware directory
-==========================================
-
-Regular files:
-
-readme.txt     - this file
-do_tests.pl    - perl script used to run the OpenSSL tests on NetWare
-cpy_tests.bat  - batch to to copy test stuff to NetWare server
-build.bat      - batch file to help with builds
-set_env.bat    - batch file to help setup build environments
-globals.txt    - results of initial code review to identify OpenSSL global variables
-
-
-The following files are generated by the various scripts.  They are
-recreated each time and it is okay to delete them.
-
-*.def - command files used by Metrowerks linker
-*.mak - make files generated by mk1mf.pl

Netware/set_env.bat

@@ -1,90 +0,0 @@
-@echo off
-
-rem ========================================================================
-rem   Batch file to assist in setting up the necessary enviroment for
-rem   building OpenSSL for NetWare.
-rem
-rem   usage:
-rem      set_env [target]
-rem
-rem      target      - "netware-clib" - Clib build
-rem                  - "netware-libc" - LibC build
-rem
-rem
-
-if "a%1" == "a" goto usage
-               
-set LIBC_BUILD=
-set CLIB_BUILD=
-
-if "%1" == "netware-clib" set CLIB_BUILD=Y
-if "%1" == "netware-clib" set LIBC_BUILD=
-
-if "%1" == "netware-libc"  set LIBC_BUILD=Y
-if "%1" == "netware-libc"  set CLIB_BUILD=
-
-rem   Location of tools (compiler, linker, etc)
-set TOOLS=d:\i_drive\tools
-
-rem   If Perl for Win32 is not already in your path, add it here
-set PERL_PATH=
-
-rem   Define path to the Metrowerks command line tools
-rem   ( compiler, assembler, linker)
-set METROWERKS_PATH=%TOOLS%\codewar\pdk_21\tools\command line tools
-rem set METROWERKS_PATH=%TOOLS%\codewar\PDK_40\Other Metrowerks Tools\Command Line Tools
-
-rem   If using gnu make define path to utility
-set GNU_MAKE_PATH=%TOOLS%\gnu
-
-rem   If using ms nmake define path to nmake
-set MS_NMAKE_PATH=%TOOLS%\msvc\600\bin
-
-rem   If using NASM assembler define path
-set NASM_PATH=%TOOLS%\nasm
-
-rem   Update path to include tool paths
-set path=%path%;%METROWERKS_PATH%
-if not "%GNU_MAKE_PATH%" == "" set path=%path%;%GNU_MAKE_PATH%
-if not "%MS_NMAKE_PATH%" == "" set path=%path%;%MS_NMAKE_PATH%
-if not "%NASM_PATH%"     == "" set path=%path%;%NASM_PATH%
-if not "%PERL_PATH%"     == "" set path=%path%;%PERL_PATH%
-
-rem   Set MWCIncludes to location of Novell NDK includes
-if "%LIBC_BUILD%" == "Y" set MWCIncludes=%TOOLS%\ndk\libc\include;%TOOLS%\ndk\libc\include\winsock;.\engines
-if "%CLIB_BUILD%" == "Y" set MWCIncludes=%TOOLS%\ndk\nwsdk\include\nlm;.\engines
-set include=
-
-rem   Set Imports to location of Novell NDK import files
-if "%LIBC_BUILD%" == "Y" set IMPORTS=%TOOLS%\ndk\libc\imports
-if "%CLIB_BUILD%" == "Y" set IMPORTS=%TOOLS%\ndk\nwsdk\imports
-
-rem   Set PRELUDE to the absolute path of the prelude object to link with in
-rem   the Metrowerks NetWare PDK - NOTE: for Clib builds "clibpre.o" is 
-rem   recommended, for LibC NKS builds libcpre.o must be used
-if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.o
-if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.o
-
-
-if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
-if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
-
-if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
-if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
-goto end
-
-:usage
-rem ===============================================================
-echo .
-echo . No target build specified!
-echo .
-echo . usage: set_env [target]
-echo .
-echo .   target      - "netware-clib" - Clib build
-echo .               - "netware-libc" - LibC build
-echo .
-
-
-
-:end
-

PROBLEMS

@@ -1,197 +0,0 @@
-* System libcrypto.dylib and libssl.dylib are used by system ld on MacOS X.
-
-
-    NOTE: The problem described here only applies when OpenSSL isn't built
-    with shared library support (i.e. without the "shared" configuration
-    option).  If you build with shared library support, you will have no
-    problems as long as you set up DYLD_LIBRARY_PATH properly at all times.
-
-
-This is really a misfeature in ld, which seems to look for .dylib libraries
-along the whole library path before it bothers looking for .a libraries.  This
-means that -L switches won't matter unless OpenSSL is built with shared
-library support.
-
-The workaround may be to change the following lines in apps/Makefile and
-test/Makefile:
-
-  LIBCRYPTO=-L.. -lcrypto
-  LIBSSL=-L.. -lssl
-
-to:
-
-  LIBCRYPTO=../libcrypto.a
-  LIBSSL=../libssl.a
-
-It's possible that something similar is needed for shared library support
-as well.  That hasn't been well tested yet.
-
-
-Another solution that many seem to recommend is to move the libraries
-/usr/lib/libcrypto.0.9.dylib, /usr/lib/libssl.0.9.dylib to a different
-directory, build and install OpenSSL and anything that depends on your
-build, then move libcrypto.0.9.dylib and libssl.0.9.dylib back to their
-original places.  Note that the version numbers on those two libraries
-may differ on your machine.
-
-
-As long as Apple doesn't fix the problem with ld, this problem building
-OpenSSL will remain as is.
-
-
-* Parallell make leads to errors
-
-While running tests, running a parallell make is a bad idea.  Many test
-scripts use the same name for output and input files, which means different
-will interfere with each other and lead to test failure.
-
-The solution is simple for now: don't run parallell make when testing.
-
-
-* Bugs in gcc triggered
-
-- According to a problem report, there are bugs in gcc 3.0 that are
-  triggered by some of the code in OpenSSL, more specifically in
-  PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
-
-	header+=11;
-	if (*header != '4') return(0); header++;
-	if (*header != ',') return(0); header++;
-
-  What happens is that gcc might optimize a little too agressively, and
-  you end up with an extra incrementation when *header != '4'.
-
-  We recommend that you upgrade gcc to as high a 3.x version as you can.
-
-- According to multiple problem reports, some of our message digest
-  implementations trigger bug[s] in code optimizer in gcc 3.3 for sparc64
-  and gcc 2.96 for ppc. Former fails to complete RIPEMD160 test, while
-  latter - SHA one.
-
-  The recomendation is to upgrade your compiler. This naturally applies to
-  other similar cases.
-
-- There is a subtle Solaris x86-specific gcc run-time environment bug, which
-  "falls between" OpenSSL [0.9.8 and later], Solaris ld and GCC. The bug
-  manifests itself as Segmentation Fault upon early application start-up.
-  The problem can be worked around by patching the environment according to
-  http://www.openssl.org/~appro/values.c.
-
-* solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
-
-As subject suggests SHA-1 might perform poorly (4 times slower)
-if compiled with WorkShop 6 compiler and -xarch=v9. The cause for
-this seems to be the fact that compiler emits multiplication to
-perform shift operations:-( To work the problem around configure
-with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'.
-
-* Problems with hp-parisc2-cc target when used with "no-asm" flag
-
-When using the hp-parisc2-cc target, wrong bignum code is generated.
-This is due to the SIXTY_FOUR_BIT build being compiled with the +O3
-aggressive optimization.
-The problem manifests itself by the BN_kronecker test hanging in an
-endless loop. Reason: the BN_kronecker test calls BN_generate_prime()
-which itself hangs. The reason could be tracked down to the bn_mul_comba8()
-function in bn_asm.c. At some occasions the higher 32bit value of r[7]
-is off by 1 (meaning: calculated=shouldbe+1). Further analysis failed,
-as no debugger support possible at +O3 and additional fprintf()'s
-introduced fixed the bug, therefore it is most likely a bug in the
-optimizer.
-The bug was found in the BN_kronecker test but may also lead to
-failures in other parts of the code.
-(See Ticket #426.)
-
-Workaround: modify the target to +O2 when building with no-asm.
-
-* Problems building shared libraries on SCO OpenServer Release 5.0.6
-  with gcc 2.95.3
-
-The symptoms appear when running the test suite, more specifically
-test/ectest, with the following result:
-
-OSSL_LIBPATH="`cd ..; pwd`"; LD_LIBRARY_PATH="$OSSL_LIBPATH:$LD_LIBRARY_PATH"; DYLD_LIBRARY_PATH="$OSSL_LIBPATH:$DYLD_LIBRARY_PATH"; SHLIB_PATH="$OSSL_LIBPATH:$SHLIB_PATH"; LIBPATH="$OSSL_LIBPATH:$LIBPATH"; if [ "debug-sco5-gcc" = "Cygwin" ]; then PATH="${LIBPATH}:$PATH"; fi; export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; ./ectest
-ectest.c:186: ABORT
-
-The cause of the problem seems to be that isxdigit(), called from
-BN_hex2bn(), returns 0 on a perfectly legitimate hex digit.  Further
-investigation shows that any of the isxxx() macros return 0 on any
-input.  A direct look in the information array that the isxxx() use,
-called __ctype, shows that it contains all zeroes...
-
-Taking a look at the newly created libcrypto.so with nm, one can see
-that the variable __ctype is defined in libcrypto's .bss (which
-explains why it is filled with zeroes):
-
-$ nm -Pg libcrypto.so | grep __ctype
-__ctype B 0011659c
-__ctype2 U         
-
-Curiously, __ctype2 is undefined, in spite of being declared in
-/usr/include/ctype.h in exactly the same way as __ctype.
-
-Any information helping to solve this issue would be deeply
-appreciated.
-
-NOTE: building non-shared doesn't come with this problem.
-
-* ULTRIX build fails with shell errors, such as "bad substitution"
-  and "test: argument expected"
-
-The problem is caused by ULTRIX /bin/sh supporting only original
-Bourne shell syntax/semantics, and the trouble is that the vast
-majority is so accustomed to more modern syntax, that very few
-people [if any] would recognize the ancient syntax even as valid.
-This inevitably results in non-trivial scripts breaking on ULTRIX,
-and OpenSSL isn't an exclusion. Fortunately there is workaround,
-hire /bin/ksh to do the job /bin/sh fails to do.
-
-1. Trick make(1) to use /bin/ksh by setting up following environ-
-   ment variables *prior* you execute ./Configure and make:
-
-	PROG_ENV=POSIX
-	MAKESHELL=/bin/ksh
-	export PROG_ENV MAKESHELL
-
-   or if your shell is csh-compatible:
-
-	setenv PROG_ENV POSIX
-	setenv MAKESHELL /bin/ksh
-
-2. Trick /bin/sh to use alternative expression evaluator. Create
-   following 'test' script for example in /tmp:
-
-	#!/bin/ksh
-	${0##*/} "$@"
-
-   Then 'chmod a+x /tmp/test; ln /tmp/test /tmp/[' and *prepend*
-   your $PATH with chosen location, e.g. PATH=/tmp:$PATH. Alter-
-   natively just replace system /bin/test and /bin/[ with the
-   above script.
-
-* hpux64-ia64-cc fails blowfish test.
-
-Compiler bug, presumably at particular patch level. It should be noted
-that same compiler generates correct 32-bit code, a.k.a. hpux-ia64-cc
-target. Drop optimization level to +O2 when compiling 64-bit bf_skey.o.
-
-* no-engines generates errors.
-
-Unfortunately, the 'no-engines' configuration option currently doesn't
-work properly.  Use 'no-hw' and you'll will at least get no hardware
-support.  We'll see how we fix that on OpenSSL versions past 0.9.8.
-
-* 'make test' fails in BN_sqr [commonly with "error 139" denoting SIGSEGV]
-  if elder GNU binutils were deployed to link shared libcrypto.so.
-
-As subject suggests the failure is caused by a bug in elder binutils,
-either as or ld, and was observed on FreeBSD and Linux. There are two
-options. First is naturally to upgrade binutils, the second one - to
-reconfigure with additional no-sse2 [or 386] option passed to ./config.
-
-* If configured with ./config no-dso, toolkit still gets linked with -ldl,
-  which most notably poses a problem when linking with dietlibc.
-
-We don't have framework to associate -ldl with no-dso, therefore the only
-way is to edit Makefile right after ./config no-dso and remove -ldl from
-EX_LIBS line.

README

@@ -1,16 +1,10 @@
 
- OpenSSL 0.9.8f-fips-dev test version
+ OpenSSL 0.9.6-beta2 [engine] 17 Sep 2000
 
- Copyright (c) 1998-2007 The OpenSSL Project
+ Copyright (c) 1998-2000 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
- WARNING
- -------
-
- This version of OpenSSL is an initial port of the FIPS 140-2 code to OpenSSL
- 0.9.8. See the file README.FIPS for brief usage details.
-
  DESCRIPTION
  -----------
 
@@ -20,13 +14,13 @@
  protocols as well as a full-strength general purpose cryptography library.
  The project is managed by a worldwide community of volunteers that use the
  Internet to communicate, plan, and develop the OpenSSL toolkit and its
- related documentation.
+ related documentation. 
 
  OpenSSL is based on the excellent SSLeay library developed from Eric A. Young
  and Tim J. Hudson.  The OpenSSL toolkit is licensed under a dual-license (the
  OpenSSL license plus the SSLeay license) situation, which basically means
  that you are free to get and use it for commercial and non-commercial
- purposes as long as you fulfill the conditions of both licenses.
+ purposes as long as you fulfill the conditions of both licenses. 
 
  OVERVIEW
  --------
@@ -42,13 +36,12 @@
      actually logically part of it. It includes routines for the following:
 
      Ciphers
-        libdes - EAY's libdes DES encryption package which was floating
-                 around the net for a few years, and was then relicensed by
-                 him as part of SSLeay.  It includes 15 'modes/variations'
-                 of DES (1, 2 and 3 key versions of ecb, cbc, cfb and ofb;
-                 pcbc and a more general form of cfb and ofb) including desx
-                 in cbc mode, a fast crypt(3), and routines to read
-                 passwords from the keyboard.
+        libdes - EAY's libdes DES encryption package which has been floating
+                 around the net for a few years.  It includes 15
+                 'modes/variations' of DES (1, 2 and 3 key versions of ecb,
+                 cbc, cfb and ofb; pcbc and a more general form of cfb and
+                 ofb) including desx in cbc mode, a fast crypt(3), and
+                 routines to read passwords from the keyboard.
         RC4 encryption,
         RC2 encryption      - 4 different modes, ecb, cbc, cfb and ofb.
         Blowfish encryption - 4 different modes, ecb, cbc, cfb and ofb.
@@ -60,16 +53,16 @@
         MDC2 message digest. A DES based hash that is popular on smart cards.
 
      Public Key
-        RSA encryption/decryption/generation.
+        RSA encryption/decryption/generation.  
             There is no limit on the number of bits.
-        DSA encryption/decryption/generation.
+        DSA encryption/decryption/generation.   
             There is no limit on the number of bits.
-        Diffie-Hellman key-exchange/key generation.
+        Diffie-Hellman key-exchange/key generation.  
             There is no limit on the number of bits.
 
      X.509v3 certificates
         X509 encoding/decoding into/from binary ASN1 and a PEM
-             based ASCII-binary encoding which supports encryption with a
+             based ascii-binary encoding which supports encryption with a
              private key.  Program to generate RSA and DSA certificate
              requests and to generate RSA and DSA certificates.
 
@@ -87,16 +80,16 @@
         A simple stack.
         A Configuration loader that uses a format similar to MS .ini files.
 
- openssl:
+ openssl: 
      A command line tool that can be used for:
         Creation of RSA, DH and DSA key parameters
-        Creation of X.509 certificates, CSRs and CRLs
+        Creation of X.509 certificates, CSRs and CRLs 
         Calculation of Message Digests
         Encryption and Decryption with Ciphers
         SSL/TLS Client and Server Tests
         Handling of S/MIME signed or encrypted mail
 
-
+        
  PATENTS
  -------
 
@@ -104,26 +97,20 @@
  locations around the world. _YOU_ are responsible for ensuring that your use
  of any algorithms is legal by checking if there are any patents in your
  country.  The file contains some of the patents that we know about or are
- rumored to exist. This is not a definitive list.
+ rumoured to exist. This is not a definitive list.
 
  RSA Security holds software patents on the RC5 algorithm.  If you
  intend to use this cipher, you must contact RSA Security for
  licensing conditions. Their web page is http://www.rsasecurity.com/.
 
  RC4 is a trademark of RSA Security, so use of this label should perhaps
- only be used with RSA Security's permission.
+ only be used with RSA Security's permission. 
 
  The IDEA algorithm is patented by Ascom in Austria, France, Germany, Italy,
- Japan, the Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They
- should be contacted if that algorithm is to be used; their web page is
+ Japan, Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They should
+ be contacted if that algorithm is to be used, their web page is
  http://www.ascom.ch/.
 
- The MDC2 algorithm is patented by IBM.
-
- NTT and Mitsubishi have patents and pending patents on the Camellia
- algorithm, but allow use at no charge without requiring an explicit
- licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
-
  INSTALLATION
  ------------
 
@@ -132,17 +119,10 @@
  INSTALL.VMS.
 
  Read the documentation in the doc/ directory.  It is quite rough, but it
- lists the functions; you will probably have to look at the code to work out
- how to use them. Look at the example programs.
+ lists the functions, you will probably have to look at the code to work out
+ how to used them. Look at the example programs.
 
- PROBLEMS
- --------
-
- For some platforms, there are some known problems that may affect the user
- or application author.  We try to collect those in doc/PROBLEMS, with current
- thoughts on how they should be solved in a future of OpenSSL.
-
- SUPPORT
+ SUPPORT 
  -------
 
  If you have any problems with OpenSSL then please take the following steps
@@ -151,7 +131,7 @@
     - Download the current snapshot from ftp://ftp.openssl.org/snapshot/
       to see if the problem has already been addressed
     - Remove ASM versions of libraries
-    - Remove compiler optimisation flags
+    - Remove compiler optimisation flags 
 
  If you wish to report a bug then please include the following information in
  any bug report:
@@ -166,13 +146,11 @@
     - Problem Description (steps that will reproduce the problem, if known)
     - Stack Traceback (if the application dumps core)
 
- Report the bug to the OpenSSL project via the Request Tracker
- (http://www.openssl.org/support/rt2.html) by mail to:
+ Report the bug to the OpenSSL project at:
 
     openssl-bugs@openssl.org
 
- Note that mail to openssl-bugs@openssl.org is recorded in the publicly
- readable request tracker database and is forwarded to a public
+ Note that mail to openssl-bugs@openssl.org is forwarded to a public
  mailing list. Confidential mail may be sent to openssl-security@openssl.org
  (PGP key available from the key servers).
 
@@ -185,18 +163,7 @@
  the string "[PATCH]" in the subject. Please be sure to include a
  textual explanation of what your patch does.
 
- Note: For legal reasons, contributions from the US can be accepted only
- if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
- (formerly BXA) with a copy to the ENC Encryption Request Coordinator;
- please take some time to look at
-    http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
- and
-    http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e))
- for the details. If "your encryption source code is too large to serve as
- an email attachment", they are glad to receive it by fax instead; hope you
- have a cheap long-distance plan.
-
- Our preferred format for changes is "diff -u" output. You might
+ The preferred format for changes is "diff -u" output. You might
  generate it like this:
 
  # cd openssl-work
@@ -204,4 +171,3 @@
  # ./Configure dist; make clean
  # cd ..
  # diff -ur openssl-orig openssl-work > mydiffs.patch
-

README.ASN1

@@ -1,187 +0,0 @@
-
-OpenSSL ASN1 Revision
-=====================
-
-This document describes some of the issues relating to the new ASN1 code.
-
-Previous OpenSSL ASN1 problems
-=============================
-
-OK why did the OpenSSL ASN1 code need revising in the first place? Well
-there are lots of reasons some of which are included below...
-
-1. The code is difficult to read and write. For every single ASN1 structure
-(e.g. SEQUENCE) four functions need to be written for new, free, encode and
-decode operations. This is a very painful and error prone operation. Very few
-people have ever written any OpenSSL ASN1 and those that have usually wish
-they hadn't.
-
-2. Partly because of 1. the code is bloated and takes up a disproportionate
-amount of space. The SEQUENCE encoder is particularly bad: it essentially
-contains two copies of the same operation, one to compute the SEQUENCE length
-and the other to encode it.
-
-3. The code is memory based: that is it expects to be able to read the whole
-structure from memory. This is fine for small structures but if you have a
-(say) 1Gb PKCS#7 signedData structure it isn't such a good idea...
-
-4. The code for the ASN1 IMPLICIT tag is evil. It is handled by temporarily
-changing the tag to the expected one, attempting to read it, then changing it
-back again. This means that decode buffers have to be writable even though they
-are ultimately unchanged. This gets in the way of constification.
-
-5. The handling of EXPLICIT isn't much better. It adds a chunk of code into 
-the decoder and encoder for every EXPLICIT tag.
-
-6. APPLICATION and PRIVATE tags aren't even supported at all.
-
-7. Even IMPLICIT isn't complete: there is no support for implicitly tagged
-types that are not OPTIONAL.
-
-8. Much of the code assumes that a tag will fit in a single octet. This is
-only true if the tag is 30 or less (mercifully tags over 30 are rare).
-
-9. The ASN1 CHOICE type has to be largely handled manually, there aren't any
-macros that properly support it.
-
-10. Encoders have no concept of OPTIONAL and have no error checking. If the
-passed structure contains a NULL in a mandatory field it will not be encoded,
-resulting in an invalid structure.
-
-11. It is tricky to add ASN1 encoders and decoders to external applications.
-
-Template model
-==============
-
-One of the major problems with revision is the sheer volume of the ASN1 code.
-Attempts to change (for example) the IMPLICIT behaviour would result in a
-modification of *every* single decode function. 
-
-I decided to adopt a template based approach. I'm using the term 'template'
-in a manner similar to SNACC templates: it has nothing to do with C++
-templates.
-
-A template is a description of an ASN1 module as several constant C structures.
-It describes in a machine readable way exactly how the ASN1 structure should
-behave. If this template contains enough detail then it is possible to write
-versions of new, free, encode, decode (and possibly others operations) that
-operate on templates.
-
-Instead of having to write code to handle each operation only a single
-template needs to be written. If new operations are needed (such as a 'print'
-operation) only a single new template based function needs to be written 
-which will then automatically handle all existing templates.
-
-Plans for revision
-==================
-
-The revision will consist of the following steps. Other than the first two
-these can be handled in any order.
- 
-o Design and write template new, free, encode and decode operations, initially
-memory based. *DONE*
-
-o Convert existing ASN1 code to template form. *IN PROGRESS*
-
-o Convert an existing ASN1 compiler (probably SNACC) to output templates
-in OpenSSL form.
-
-o Add support for BIO based ASN1 encoders and decoders to handle large
-structures, initially blocking I/O.
-
-o Add support for non blocking I/O: this is quite a bit harder than blocking
-I/O.
-
-o Add new ASN1 structures, such as OCSP, CRMF, S/MIME v3 (CMS), attribute
-certificates etc etc.
-
-Description of major changes
-============================
-
-The BOOLEAN type now takes three values. 0xff is TRUE, 0 is FALSE and -1 is
-absent. The meaning of absent depends on the context. If for example the
-boolean type is DEFAULT FALSE (as in the case of the critical flag for
-certificate extensions) then -1 is FALSE, if DEFAULT TRUE then -1 is TRUE.
-Usually the value will only ever be read via an API which will hide this from
-an application.
-
-There is an evil bug in the old ASN1 code that mishandles OPTIONAL with
-SEQUENCE OF or SET OF. These are both implemented as a STACK structure. The
-old code would omit the structure if the STACK was NULL (which is fine) or if
-it had zero elements (which is NOT OK). This causes problems because an empty
-SEQUENCE OF or SET OF will result in an empty STACK when it is decoded but when
-it is encoded it will be omitted resulting in different encodings. The new code
-only omits the encoding if the STACK is NULL, if it contains zero elements it
-is encoded and empty. There is an additional problem though: because an empty
-STACK was omitted, sometimes the corresponding *_new() function would
-initialize the STACK to empty so an application could immediately use it, if
-this is done with the new code (i.e. a NULL) it wont work. Therefore a new
-STACK should be allocated first. One instance of this is the X509_CRL list of
-revoked certificates: a helper function X509_CRL_add0_revoked() has been added
-for this purpose.
-
-The X509_ATTRIBUTE structure used to have an element called 'set' which took
-the value 1 if the attribute value was a SET OF or 0 if it was a single. Due
-to the behaviour of CHOICE in the new code this has been changed to a field
-called 'single' which is 0 for a SET OF and 1 for single. The old field has
-been deleted to deliberately break source compatibility. Since this structure
-is normally accessed via higher level functions this shouldn't break too much.
-
-The X509_REQ_INFO certificate request info structure no longer has a field
-called 'req_kludge'. This used to be set to 1 if the attributes field was
-(incorrectly) omitted. You can check to see if the field is omitted now by
-checking if the attributes field is NULL. Similarly if you need to omit
-the field then free attributes and set it to NULL.
-
-The top level 'detached' field in the PKCS7 structure is no longer set when
-a PKCS#7 structure is read in. PKCS7_is_detached() should be called instead.
-The behaviour of PKCS7_get_detached() is unaffected.
-
-The values of 'type' in the GENERAL_NAME structure have changed. This is
-because the old code use the ASN1 initial octet as the selector. The new
-code uses the index in the ASN1_CHOICE template.
-
-The DIST_POINT_NAME structure has changed to be a true CHOICE type.
-
-typedef struct DIST_POINT_NAME_st {
-int type;
-union {
-	STACK_OF(GENERAL_NAME) *fullname;
-	STACK_OF(X509_NAME_ENTRY) *relativename;
-} name;
-} DIST_POINT_NAME;
-
-This means that name.fullname or name.relativename should be set
-and type reflects the option. That is if name.fullname is set then
-type is 0 and if name.relativename is set type is 1.
-
-With the old code using the i2d functions would typically involve:
-
-unsigned char *buf, *p;
-int len;
-/* Find length of encoding */
-len = i2d_SOMETHING(x, NULL);
-/* Allocate buffer */
-buf = OPENSSL_malloc(len);
-if(buf == NULL) {
-	/* Malloc error */
-}
-/* Use temp variable because &p gets updated to point to end of
- * encoding.
- */
-p = buf;
-i2d_SOMETHING(x, &p);
-
-
-Using the new i2d you can also do:
-
-unsigned char *buf = NULL;
-int len;
-len = i2d_SOMETHING(x, &buf);
-if(len < 0) {
-	/* Malloc error */
-}
-
-and it will automatically allocate and populate a buffer with the
-encoding. After this call 'buf' will point to the start of the
-encoding which is len bytes long.

README.ENGINE

@@ -1,289 +0,0 @@
-  ENGINE
-  ======
-
-  With OpenSSL 0.9.6, a new component was added to support alternative
-  cryptography implementations, most commonly for interfacing with external
-  crypto devices (eg. accelerator cards). This component is called ENGINE,
-  and its presence in OpenSSL 0.9.6 (and subsequent bug-fix releases)
-  caused a little confusion as 0.9.6** releases were rolled in two
-  versions, a "standard" and an "engine" version. In development for 0.9.7,
-  the ENGINE code has been merged into the main branch and will be present
-  in the standard releases from 0.9.7 forwards.
-
-  There are currently built-in ENGINE implementations for the following
-  crypto devices:
-
-      o CryptoSwift
-      o Compaq Atalla
-      o nCipher CHIL
-      o Nuron
-      o Broadcom uBSec
-
-  In addition, dynamic binding to external ENGINE implementations is now
-  provided by a special ENGINE called "dynamic". See the "DYNAMIC ENGINE"
-  section below for details.
-
-  At this stage, a number of things are still needed and are being worked on:
-
-      1 Integration of EVP support.
-      2 Configuration support.
-      3 Documentation!
-
-1 With respect to EVP, this relates to support for ciphers and digests in
-  the ENGINE model so that alternative implementations of existing
-  algorithms/modes (or previously unimplemented ones) can be provided by
-  ENGINE implementations.
-
-2 Configuration support currently exists in the ENGINE API itself, in the
-  form of "control commands". These allow an application to expose to the
-  user/admin the set of commands and parameter types a given ENGINE
-  implementation supports, and for an application to directly feed string
-  based input to those ENGINEs, in the form of name-value pairs. This is an
-  extensible way for ENGINEs to define their own "configuration" mechanisms
-  that are specific to a given ENGINE (eg. for a particular hardware
-  device) but that should be consistent across *all* OpenSSL-based
-  applications when they use that ENGINE. Work is in progress (or at least
-  in planning) for supporting these control commands from the CONF (or
-  NCONF) code so that applications using OpenSSL's existing configuration
-  file format can have ENGINE settings specified in much the same way.
-  Presently however, applications must use the ENGINE API itself to provide
-  such functionality. To see first hand the types of commands available
-  with the various compiled-in ENGINEs (see further down for dynamic
-  ENGINEs), use the "engine" openssl utility with full verbosity, ie;
-       openssl engine -vvvv
-
-3 Documentation? Volunteers welcome! The source code is reasonably well
-  self-documenting, but some summaries and usage instructions are needed -
-  moreover, they are needed in the same POD format the existing OpenSSL
-  documentation is provided in. Any complete or incomplete contributions
-  would help make this happen.
-
-  STABILITY & BUG-REPORTS
-  =======================
-
-  What already exists is fairly stable as far as it has been tested, but
-  the test base has been a bit small most of the time. For the most part,
-  the vendors of the devices these ENGINEs support have contributed to the
-  development and/or testing of the implementations, and *usually* (with no
-  guarantees) have experience in using the ENGINE support to drive their
-  devices from common OpenSSL-based applications. Bugs and/or inexplicable
-  behaviour in using a specific ENGINE implementation should be sent to the
-  author of that implementation (if it is mentioned in the corresponding C
-  file), and in the case of implementations for commercial hardware
-  devices, also through whatever vendor support channels are available.  If
-  none of this is possible, or the problem seems to be something about the
-  ENGINE API itself (ie. not necessarily specific to a particular ENGINE
-  implementation) then you should mail complete details to the relevant
-  OpenSSL mailing list. For a definition of "complete details", refer to
-  the OpenSSL "README" file. As for which list to send it to;
-
-     openssl-users: if you are *using* the ENGINE abstraction, either in an
-          pre-compiled application or in your own application code.
-
-     openssl-dev: if you are discussing problems with OpenSSL source code.
-
-  USAGE
-  =====
-
-  The default "openssl" ENGINE is always chosen when performing crypto
-  operations unless you specify otherwise. You must actively tell the
-  openssl utility commands to use anything else through a new command line
-  switch called "-engine". Also, if you want to use the ENGINE support in
-  your own code to do something similar, you must likewise explicitly
-  select the ENGINE implementation you want.
-
-  Depending on the type of hardware, system, and configuration, "settings"
-  may need to be applied to an ENGINE for it to function as expected/hoped.
-  The recommended way of doing this is for the application to support
-  ENGINE "control commands" so that each ENGINE implementation can provide
-  whatever configuration primitives it might require and the application
-  can allow the user/admin (and thus the hardware vendor's support desk
-  also) to provide any such input directly to the ENGINE implementation.
-  This way, applications do not need to know anything specific to any
-  device, they only need to provide the means to carry such user/admin
-  input through to the ENGINE in question. Ie. this connects *you* (and
-  your helpdesk) to the specific ENGINE implementation (and device), and
-  allows application authors to not get buried in hassle supporting
-  arbitrary devices they know (and care) nothing about.
-
-  A new "openssl" utility, "openssl engine", has been added in that allows
-  for testing and examination of ENGINE implementations. Basic usage
-  instructions are available by specifying the "-?" command line switch.
-
-  DYNAMIC ENGINES
-  ===============
-
-  The new "dynamic" ENGINE provides a low-overhead way to support ENGINE
-  implementations that aren't pre-compiled and linked into OpenSSL-based
-  applications. This could be because existing compiled-in implementations
-  have known problems and you wish to use a newer version with an existing
-  application. It could equally be because the application (or OpenSSL
-  library) you are using simply doesn't have support for the ENGINE you
-  wish to use, and the ENGINE provider (eg. hardware vendor) is providing
-  you with a self-contained implementation in the form of a shared-library.
-  The other use-case for "dynamic" is with applications that wish to
-  maintain the smallest foot-print possible and so do not link in various
-  ENGINE implementations from OpenSSL, but instead leaves you to provide
-  them, if you want them, in the form of "dynamic"-loadable
-  shared-libraries. It should be possible for hardware vendors to provide
-  their own shared-libraries to support arbitrary hardware to work with
-  applications based on OpenSSL 0.9.7 or later. If you're using an
-  application based on 0.9.7 (or later) and the support you desire is only
-  announced for versions later than the one you need, ask the vendor to
-  backport their ENGINE to the version you need.
-
-  How does "dynamic" work?
-  ------------------------
-    The dynamic ENGINE has a special flag in its implementation such that
-    every time application code asks for the 'dynamic' ENGINE, it in fact
-    gets its own copy of it. As such, multi-threaded code (or code that
-    multiplexes multiple uses of 'dynamic' in a single application in any
-    way at all) does not get confused by 'dynamic' being used to do many
-    independent things. Other ENGINEs typically don't do this so there is
-    only ever 1 ENGINE structure of its type (and reference counts are used
-    to keep order). The dynamic ENGINE itself provides absolutely no
-    cryptographic functionality, and any attempt to "initialise" the ENGINE
-    automatically fails. All it does provide are a few "control commands"
-    that can be used to control how it will load an external ENGINE
-    implementation from a shared-library. To see these control commands,
-    use the command-line;
-
-       openssl engine -vvvv dynamic
-
-    The "SO_PATH" control command should be used to identify the
-    shared-library that contains the ENGINE implementation, and "NO_VCHECK"
-    might possibly be useful if there is a minor version conflict and you
-    (or a vendor helpdesk) is convinced you can safely ignore it.
-    "ID" is probably only needed if a shared-library implements
-    multiple ENGINEs, but if you know the engine id you expect to be using,
-    it doesn't hurt to specify it (and this provides a sanity check if
-    nothing else). "LIST_ADD" is only required if you actually wish the
-    loaded ENGINE to be discoverable by application code later on using the
-    ENGINE's "id". For most applications, this isn't necessary - but some
-    application authors may have nifty reasons for using it. The "LOAD"
-    command is the only one that takes no parameters and is the command
-    that uses the settings from any previous commands to actually *load*
-    the shared-library ENGINE implementation. If this command succeeds, the
-    (copy of the) 'dynamic' ENGINE will magically morph into the ENGINE
-    that has been loaded from the shared-library. As such, any control
-    commands supported by the loaded ENGINE could then be executed as per
-    normal. Eg. if ENGINE "foo" is implemented in the shared-library
-    "libfoo.so" and it supports some special control command "CMD_FOO", the
-    following code would load and use it (NB: obviously this code has no
-    error checking);
-
-       ENGINE *e = ENGINE_by_id("dynamic");
-       ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libfoo.so", 0);
-       ENGINE_ctrl_cmd_string(e, "ID", "foo", 0);
-       ENGINE_ctrl_cmd_string(e, "LOAD", NULL, 0);
-       ENGINE_ctrl_cmd_string(e, "CMD_FOO", "some input data", 0);
-
-    For testing, the "openssl engine" utility can be useful for this sort
-    of thing. For example the above code excerpt would achieve much the
-    same result as;
-
-       openssl engine dynamic \
-                 -pre SO_PATH:/lib/libfoo.so \
-                 -pre ID:foo \
-                 -pre LOAD \
-                 -pre "CMD_FOO:some input data"
-
-    Or to simply see the list of commands supported by the "foo" ENGINE;
-
-       openssl engine -vvvv dynamic \
-                 -pre SO_PATH:/lib/libfoo.so \
-                 -pre ID:foo \
-                 -pre LOAD
-
-    Applications that support the ENGINE API and more specifically, the
-    "control commands" mechanism, will provide some way for you to pass
-    such commands through to ENGINEs. As such, you would select "dynamic"
-    as the ENGINE to use, and the parameters/commands you pass would
-    control the *actual* ENGINE used. Each command is actually a name-value
-    pair and the value can sometimes be omitted (eg. the "LOAD" command).
-    Whilst the syntax demonstrated in "openssl engine" uses a colon to
-    separate the command name from the value, applications may provide
-    their own syntax for making that separation (eg. a win32 registry
-    key-value pair may be used by some applications). The reason for the
-    "-pre" syntax in the "openssl engine" utility is that some commands
-    might be issued to an ENGINE *after* it has been initialised for use.
-    Eg. if an ENGINE implementation requires a smart-card to be inserted
-    during initialisation (or a PIN to be typed, or whatever), there may be
-    a control command you can issue afterwards to "forget" the smart-card
-    so that additional initialisation is no longer possible. In
-    applications such as web-servers, where potentially volatile code may
-    run on the same host system, this may provide some arguable security
-    value. In such a case, the command would be passed to the ENGINE after
-    it has been initialised for use, and so the "-post" switch would be
-    used instead. Applications may provide a different syntax for
-    supporting this distinction, and some may simply not provide it at all
-    ("-pre" is almost always what you're after, in reality).
-
-  How do I build a "dynamic" ENGINE?
-  ----------------------------------
-    This question is trickier - currently OpenSSL bundles various ENGINE
-    implementations that are statically built in, and any application that
-    calls the "ENGINE_load_builtin_engines()" function will automatically
-    have all such ENGINEs available (and occupying memory). Applications
-    that don't call that function have no ENGINEs available like that and
-    would have to use "dynamic" to load any such ENGINE - but on the other
-    hand such applications would only have the memory footprint of any
-    ENGINEs explicitly loaded using user/admin provided control commands.
-    The main advantage of not statically linking ENGINEs and only using
-    "dynamic" for hardware support is that any installation using no
-    "external" ENGINE suffers no unnecessary memory footprint from unused
-    ENGINEs. Likewise, installations that do require an ENGINE incur the
-    overheads from only *that* ENGINE once it has been loaded.
-
-    Sounds good? Maybe, but currently building an ENGINE implementation as
-    a shared-library that can be loaded by "dynamic" isn't automated in
-    OpenSSL's build process. It can be done manually quite easily however.
-    Such a shared-library can either be built with any OpenSSL code it
-    needs statically linked in, or it can link dynamically against OpenSSL
-    if OpenSSL itself is built as a shared library. The instructions are
-    the same in each case, but in the former (statically linked any
-    dependencies on OpenSSL) you must ensure OpenSSL is built with
-    position-independent code ("PIC"). The default OpenSSL compilation may
-    already specify the relevant flags to do this, but you should consult
-    with your compiler documentation if you are in any doubt.
-
-    This example will show building the "atalla" ENGINE in the
-    crypto/engine/ directory as a shared-library for use via the "dynamic"
-    ENGINE.
-    1) "cd" to the crypto/engine/ directory of a pre-compiled OpenSSL
-       source tree.
-    2) Recompile at least one source file so you can see all the compiler
-       flags (and syntax) being used to build normally. Eg;
-           touch hw_atalla.c ; make
-       will rebuild "hw_atalla.o" using all such flags.
-    3) Manually enter the same compilation line to compile the
-       "hw_atalla.c" file but with the following two changes;
-         (a) add "-DENGINE_DYNAMIC_SUPPORT" to the command line switches,
-	 (b) change the output file from "hw_atalla.o" to something new,
-             eg. "tmp_atalla.o"
-    4) Link "tmp_atalla.o" into a shared-library using the top-level
-       OpenSSL libraries to resolve any dependencies. The syntax for doing
-       this depends heavily on your system/compiler and is a nightmare
-       known well to anyone who has worked with shared-library portability
-       before. 'gcc' on Linux, for example, would use the following syntax;
-          gcc -shared -o dyn_atalla.so tmp_atalla.o -L../.. -lcrypto
-    5) Test your shared library using "openssl engine" as explained in the
-       previous section. Eg. from the top-level directory, you might try;
-          apps/openssl engine -vvvv dynamic \
-              -pre SO_PATH:./crypto/engine/dyn_atalla.so -pre LOAD
-       If the shared-library loads successfully, you will see both "-pre"
-       commands marked as "SUCCESS" and the list of control commands
-       displayed (because of "-vvvv") will be the control commands for the
-       *atalla* ENGINE (ie. *not* the 'dynamic' ENGINE). You can also add
-       the "-t" switch to the utility if you want it to try and initialise
-       the atalla ENGINE for use to test any possible hardware/driver
-       issues.
-
-  PROBLEMS
-  ========
-
-  It seems like the ENGINE part doesn't work too well with CryptoSwift on Win32.
-  A quick test done right before the release showed that trying "openssl speed
-  -engine cswift" generated errors. If the DSO gets enabled, an attempt is made
-  to write at memory address 0x00000002.
-

README.FIPS

@@ -1,35 +0,0 @@
-
-Brief instructions on using OpenSSL 0.9.8 FIPS test branch.
-
-To avoid any confusion that this might generate a validate library just
-supplying "fips" on the command line wont work. Additional options are
-needed...
-
-To build fipscanister and produce a usable distribution the configuration
-option "fipscanisterbuild" is used to either the config or Configure scripts.
-For example:
-
-./config fipscanisterbuild
-
-This builds static libraries in a way similar to the FIPS 1.1.1 distro.
-
-To build the shared library fipscanister version use the configuration
-options "fipsdso".
-
-Note that the fipscanister.o file is totally incompatible with the version
-produced by the FIPS 1.1.1 distribution and cannot be made to work with
-it.
-
-Both options should also work under Windows and VC++. With this version the
-use of MinGW is unnecessary and the normal VC++ build procedure can be
-followed *except* the GNU linker "ld.exe" (for example from MinGW) must be
-accessible somewhere on the PATH. For example:
-
-perl Configure VC-WIN32 fipsdso
-ms\do_masm
-nmake -f ms\ntdll.mak
-
-Note that any warnings from a Windows version of "tar" about being unable to
-create symbolic links can be ignored.
-
-

STATUS

@@ -1,91 +1,84 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2007/02/23 12:12:27 $
+  ______________                           $Date: 2000/09/17 15:56:27 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 0.9.9:  Under development...
-    o  OpenSSL 0.9.8e: Released on February  23rd, 2007
-    o  OpenSSL 0.9.8d: Released on September 28th, 2006
-    o  OpenSSL 0.9.8c: Released on September  5th, 2006
-    o  OpenSSL 0.9.8b: Released on May        4th, 2006
-    o  OpenSSL 0.9.8a: Released on October   11th, 2005
-    o  OpenSSL 0.9.8:  Released on July       5th, 2005
-    o  OpenSSL 0.9.7m: Released on February  23rd, 2007
-    o  OpenSSL 0.9.7l: Released on September 28th, 2006
-    o  OpenSSL 0.9.7k: Released on September  5th, 2006
-    o  OpenSSL 0.9.7j: Released on May        4th, 2006
-    o  OpenSSL 0.9.7i: Released on October   14th, 2005
-    o  OpenSSL 0.9.7h: Released on October   11th, 2005
-    o  OpenSSL 0.9.7g: Released on April     11th, 2005
-    o  OpenSSL 0.9.7f: Released on March     22nd, 2005
-    o  OpenSSL 0.9.7e: Released on October   25th, 2004
-    o  OpenSSL 0.9.7d: Released on March     17th, 2004
-    o  OpenSSL 0.9.7c: Released on September 30th, 2003
-    o  OpenSSL 0.9.7b: Released on April     10th, 2003
-    o  OpenSSL 0.9.7a: Released on February  19th, 2003
-    o  OpenSSL 0.9.7:  Released on December  31st, 2002
-    o  OpenSSL 0.9.6m: Released on March     17th, 2004
-    o  OpenSSL 0.9.6l: Released on November   4th, 2003
-    o  OpenSSL 0.9.6k: Released on September 30th, 2003
-    o  OpenSSL 0.9.6j: Released on April     10th, 2003
-    o  OpenSSL 0.9.6i: Released on February  19th, 2003
-    o  OpenSSL 0.9.6h: Released on December   5th, 2002
-    o  OpenSSL 0.9.6g: Released on August     9th, 2002
-    o  OpenSSL 0.9.6f: Released on August     8th, 2002
-    o  OpenSSL 0.9.6e: Released on July      30th, 2002
-    o  OpenSSL 0.9.6d: Released on May        9th, 2002
-    o  OpenSSL 0.9.6c: Released on December  21st, 2001
-    o  OpenSSL 0.9.6b: Released on July       9th, 2001
-    o  OpenSSL 0.9.6a: Released on April      5th, 2001
-    o  OpenSSL 0.9.6:  Released on September 24th, 2000
-    o  OpenSSL 0.9.5a: Released on April      1st, 2000
-    o  OpenSSL 0.9.5:  Released on February  28th, 2000
-    o  OpenSSL 0.9.4:  Released on August    09th, 1999
-    o  OpenSSL 0.9.3a: Released on May       29th, 1999
-    o  OpenSSL 0.9.3:  Released on May       25th, 1999
-    o  OpenSSL 0.9.2b: Released on March     22th, 1999
-    o  OpenSSL 0.9.1c: Released on December  23th, 1998
-
-  [See also http://www.openssl.org/support/rt2.html]
+    o  OpenSSL 0.9.6:  Under development (in release cycle)...
+                       Proposed release date September 24, 2000
+                       0.9.6-beta1 is available:
+			OpenBSD-x86 2.7			- failed
+				ftime not supported [FIXED]
+			hpux-parisc-cc 10.20		- passed
+			hpux-parisc-gcc 10.20		- passed
+			hpux-parisc-gcc 11.00		- passed
+			hpux-gcc			- passed
+			hpux-brokengcc			- failed
+				BN_sqr fails in test
+			linux-elf			- passed
+			linux-sparcv7			- passed
+			linux-ppc			- passed
+			Solaris [engine]		- failed
+				speed cswift gives odd errors [FIXED]
+			solaris-sparcv8-gcc		- passed
+			solaris-sparcv9-gcc		- passed
+			solaris-sparcv9-cc		- passed
+			solaris64-sparcv9-cc		- passed
+			sco5-gcc			- passed
+			sco5-cc				- passed
+			FreeBSD				- passed
+			Win32 VC++			- failed
+				PCURSORINFO not defined unless Win2000 [FIXED]
+				RAND_poll() problem on Win2000 [FIXED]
+				DSO method always DSO_METHOD_null [FIXED]
+			CygWin32			- test failed
+			MingW32				- failed
+				thelp32.h
+			aix-gcc (AIX 4.3.2)		- passed
+			VMS/Alpha			- failed
+				Some things were missing [FIXED]
+    o  OpenSSL 0.9.5a: Released on April     1st, 2000
+    o  OpenSSL 0.9.5:  Released on February 28th, 2000
+    o  OpenSSL 0.9.4:  Released on August   09th, 1999
+    o  OpenSSL 0.9.3a: Released on May      29th, 1999
+    o  OpenSSL 0.9.3:  Released on May      25th, 1999
+    o  OpenSSL 0.9.2b: Released on March    22th, 1999
+    o  OpenSSL 0.9.1c: Released on December 23th, 1998
 
   RELEASE SHOWSTOPPERS
 
-    o The Makefiles fail with some SysV makes.
-    o 
-
   AVAILABLE PATCHES
 
-    o 
+    o CA.pl patch (Damien Miller)
 
   IN PROGRESS
 
     o Steve is currently working on (in no particular order):
         ASN1 code redesign, butchery, replacement.
-        OCSP
         EVP cipher enhancement.
-        Enhanced certificate chain verification.
+        Proper (or at least usable) certificate chain verification.
 	Private key, certificate and CRL API and implementation.
 	Developing and bugfixing PKCS#7 (S/MIME code).
         Various X509 issues: character sets, certificate request extensions.
+    o Geoff and Richard are currently working on:
+	ENGINE (the new code that gives hardware support among others).
     o Richard is currently working on:
-	Constification
-	Attribute Certificate support
-	Certificate Pair support
-	Storage Engines (primarly an LDAP storage engine)
-	Certificate chain validation with full RFC 3280 compatibility
+	UTIL (a new set of library functions to support some higher level
+	      functionality that is currently missing).
+	Dynamic thread-lock support.
+	Shared library support for VMS.
 
   NEEDS PATCH
 
-    o  0.9.8-dev: COMPLEMENTOFALL and COMPLEMENTOFDEFAULT do not
-       handle ECCdraft cipher suites correctly.
-
-    o  apps/ca.c: "Sign the certificate?" - "n" creates empty certificate file
-
-    o  "OpenSSL STATUS" is never up-to-date.
+    o  non-blocking socket on AIX
+    o  $(PERL) in */Makefile.ssl
+    o  "Sign the certificate?" - "n" creates empty certificate file
 
   OPEN ISSUES
 
+    o internal_verify doesn't know about X509.v3 (basicConstraints
+      CA flag ...)
+
     o  The Makefile hierarchy and build mechanism is still not a round thing:
 
        1. The config vs. Configure scripts
@@ -110,20 +103,22 @@
                     which apparently is not flexible enough to generate
                     libcrypto)
 
+
+    o  The perl/ stuff needs a major overhaul. Currently it's
+       totally obsolete. Either we clean it up and enhance it to be up-to-date
+       with the C code or we also could replace it with the really nice
+       Net::SSLeay package we can find under
+       http://www.neuronio.pt/SSLeay.pm.html.  Ralf uses this package for a
+       longer time and it works fine and is a nice Perl module. Best would be
+       to convince the author to work for the OpenSSL project and create a
+       Net::OpenSSL or Crypt::OpenSSL package out of it and maintains it for
+       us.
+
+       Status: Ralf thinks we should both contact the author of Net::SSLeay
+               and look how much effort it is to bring Eric's perl/ stuff up
+               to date.
+               Paul +1
+
   WISHES
 
-    o  Add variants of DH_generate_parameters() and BN_generate_prime() [etc?]
-       where the callback function can request that the function be aborted.
-       [Gregory Stark <ghstark@pobox.com>, <rayyang2000@yahoo.com>]
-
-    o  SRP in TLS.
-       [wished by:
-        Dj <derek@yo.net>, Tom Wu <tom@arcot.com>,
-        Tom Holroyd <tomh@po.crl.go.jp>]
-
-       See http://search.ietf.org/internet-drafts/draft-ietf-tls-srp-00.txt
-       as well as http://www-cs-students.stanford.edu/~tjw/srp/.
-
-       Tom Holroyd tells us there is a SRP patch for OpenSSH at
-       http://members.tripod.com/professor_tom/archives/, that could
-       be useful.
+    o 

VMS/VMSify-conf.pl

@@ -1,34 +0,0 @@
-#! /usr/bin/perl
-
-use strict;
-use warnings;
-
-my @directory_vars = ( "dir", "certs", "crl_dir", "new_certs_dir" );
-my @file_vars = ( "database", "certificate", "serial", "crlnumber",
-		  "crl", "private_key", "RANDFILE" );
-while(<STDIN>) {
-    chomp;
-    foreach my $d (@directory_vars) {
-	if (/^(\s*\#?\s*${d}\s*=\s*)\.\/([^\s\#]*)([\s\#].*)$/) {
-	    $_ = "$1sys\\\$disk:\[.$2$3";
-	} elsif (/^(\s*\#?\s*${d}\s*=\s*)(\w[^\s\#]*)([\s\#].*)$/) {
-	    $_ = "$1sys\\\$disk:\[.$2$3";
-	}
-	s/^(\s*\#?\s*${d}\s*=\s*\$\w+)\/([^\s\#]*)([\s\#].*)$/$1.$2\]$3/;
-	while(/^(\s*\#?\s*${d}\s*=\s*(\$\w+\.|sys\\\$disk:\[\.)[\w\.]+)\/([^\]]*)\](.*)$/) {
-	    $_ = "$1.$3]$4";
-	}
-    }
-    foreach my $f (@file_vars) {
-	s/^(\s*\#?\s*${f}\s*=\s*)\.\/(.*)$/$1sys\\\$disk:\[\/$2/;
-	while(/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/(\w+\/[^\s\#]*)([\s\#].*)$/) {
-	    $_ = "$1.$3$4";
-	}
-	if (/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/(\w+)([\s\#].*)$/) {
-	    $_ = "$1]$3.$4";
-	} elsif  (/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/([^\s\#]*)([\s\#].*)$/) {
-	    $_ = "$1]$3$4";
-	}
-   }
-    print $_,"\n";
-}

VMS/mkshared.com

@@ -1,354 +0,0 @@
-$! MKSHARED.COM -- script to created shareable images on VMS
-$!
-$! No command line parameters.  This should be run at the start of the source
-$! tree (the same directory where one finds INSTALL.VMS).
-$!
-$! Input:	[.UTIL]LIBEAY.NUM,[.AXP.EXE.CRYPTO]LIBCRYPTO.OLB
-$!		[.UTIL]SSLEAY.NUM,[.AXP.EXE.SSL]LIBSSL.OLB
-$! Output:	[.AXP.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
-$!		[.AXP.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
-$!
-$! So far, tests have only been made on VMS for Alpha.  VAX will come in time.
-$! ===========================================================================
-$
-$! ----- Prepare info for processing: version number and file info
-$ gosub read_version_info
-$ if libver .eqs. ""
-$ then
-$   write sys$error "ERROR: Couldn't find any library version info..."
-$   exit
-$ endif
-$
-$ if f$getsyi("CPU") .ge. 128
-$ then
-$   libid  = "Crypto"
-$   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.AXP.EXE.CRYPTO]"
-$   libolb = "''libdir'LIBCRYPTO.OLB"
-$   libopt = "''libdir'LIBCRYPTO.OPT"
-$   libmap = "''libdir'LIBCRYPTO.MAP"
-$   libgoal= "''libdir'LIBCRYPTO.EXE"
-$   libref = ""
-$   gosub create_axp_shr
-$   libid  = "SSL"
-$   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.AXP.EXE.SSL]"
-$   libolb = "''libdir'LIBSSL.OLB"
-$   libopt = "''libdir'LIBSSL.OPT"
-$   libmap = "''libdir'LIBSSL.MAP"
-$   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.AXP.EXE.CRYPTO]LIBCRYPTO.EXE"
-$   gosub create_axp_shr
-$ else
-$   libtit = "CRYPTO_TRANSFER_VECTOR"
-$   libid  = "Crypto"
-$   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.VAX.EXE.CRYPTO]"
-$   libmar = "''libdir'LIBCRYPTO.MAR"
-$   libolb = "''libdir'LIBCRYPTO.OLB"
-$   libopt = "''libdir'LIBCRYPTO.OPT"
-$   libobj = "''libdir'LIBCRYPTO.OBJ"
-$   libmap = "''libdir'LIBCRYPTO.MAP"
-$   libgoal= "''libdir'LIBCRYPTO.EXE"
-$   libref = ""
-$   libvec = "LIBCRYPTO"
-$   gosub create_vax_shr
-$   libtit = "SSL_TRANSFER_VECTOR"
-$   libid  = "SSL"
-$   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.VAX.EXE.SSL]"
-$   libmar = "''libdir'LIBSSL.MAR"
-$   libolb = "''libdir'LIBSSL.OLB"
-$   libopt = "''libdir'LIBSSL.OPT"
-$   libobj = "''libdir'LIBSSL.OBJ"
-$   libmap = "''libdir'LIBSSL.MAP"
-$   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.VAX.EXE.CRYPTO]LIBCRYPTO.EXE"
-$   libvec = "LIBSSL"
-$   gosub create_vax_shr
-$ endif
-$ exit
-$
-$! ----- Soubroutines to actually build the shareable libraries
-$! The way things work, there's a main shareable library creator for each
-$! supported architecture, which is called from the main code above.
-$! The creator will define a number of variables to tell the next levels of
-$! subroutines what routines to use to write to the option files, call the
-$! main processor, read_func_num, and when that is done, it will write version
-$! data at the end of the .opt file, close it, and link the library.
-$!
-$! read_func_num reads through a .num file and calls the writer routine for
-$! each line.  It's also responsible for checking that order is properly kept
-$! in the .num file, check that each line applies to VMS and the architecture,
-$! and to fill in "holes" with dummy entries.
-$!
-$! The creator routines depend on the following variables:
-$! libnum	The name of the .num file to use as input
-$! libolb	The name of the object library to build from
-$! libid	The identification string of the shareable library
-$! libopt	The name of the .opt file to write
-$! libtit	The title of the assembler transfer vector file (VAX only)
-$! libmar	The name of the assembler transfer vector file (VAX only)
-$! libmap	The name of the map file to write
-$! libgoal	The name of the shareable library to write
-$! libref	The name of a shareable library to link in
-$!
-$! read_func_num depends on the following variables from the creator:
-$! libwriter	The name of the writer routine to call for each .num file line
-$! -----
-$
-$! ----- Subroutines for AXP
-$! -----
-$! The creator routine
-$ create_axp_shr:
-$   open/write opt 'libopt'
-$   write opt "identification=""",libid," ",libverstr,""""
-$   write opt libolb,"/lib"
-$   if libref .nes. "" then write opt libref,"/SHARE"
-$   write opt "SYMBOL_VECTOR=(-"
-$   libfirstentry := true
-$   libwrch   := opt
-$   libwriter := write_axp_transfer_entry
-$   textcount = 0
-$   gosub read_func_num
-$   write opt ")"
-$   write opt "GSMATCH=",libvmatch,",",libver
-$   close opt
-$   link/map='libmap'/full/share='libgoal' 'libopt'/option
-$   return
-$
-$! The record writer routine
-$ write_axp_transfer_entry:
-$   if libentry .eqs. ".dummy" then return
-$   if info_kind .eqs. "VARIABLE"
-$   then
-$     pr:=DATA
-$   else
-$     pr:=PROCEDURE
-$   endif
-$   textcount_this = f$length(pr) + f$length(libentry) + 5
-$   if textcount + textcount_this .gt. 1024
-$   then
-$     write opt ")"
-$     write opt "SYMBOL_VECTOR=(-"
-$     textcount = 16
-$     libfirstentry := true
-$   endif
-$   if libfirstentry
-$   then
-$     write 'libwrch' "    ",libentry,"=",pr," -"
-$   else
-$     write 'libwrch' "    ,",libentry,"=",pr," -"
-$   endif
-$   libfirstentry := false
-$   textcount = textcount + textcount_this
-$   return
-$
-$! ----- Subroutines for AXP
-$! -----
-$! The creator routine
-$ create_vax_shr:
-$   open/write mar 'libmar'
-$   type sys$input:/out=mar:
-;
-; Transfer vector for VAX shareable image
-;
-$   write mar "	.TITLE ",libtit
-$   write mar "	.IDENT /",libid,"/"
-$   type sys$input:/out=mar:
-;
-; Define macro to assist in building transfer vector entries.  Each entry
-; should take no more than 8 bytes.
-;
-	.MACRO FTRANSFER_ENTRY routine
-	.ALIGN QUAD
-	.TRANSFER routine
-	.MASK	routine
-	JMP	routine+2
-	.ENDM FTRANSFER_ENTRY
-;
-; Place entries in own program section.
-;
-$   write mar "	.PSECT $$",libvec,",QUAD,PIC,USR,CON,REL,LCL,SHR,EXE,RD,NOWRT"
-$   write mar libvec,"_xfer:"
-$   libwrch   := mar
-$   libwriter := write_vax_ftransfer_entry
-$   gosub read_func_num
-$   type sys$input:/out=mar:
-;
-; Allocate extra storage at end of vector to allow for expansion.
-;
-$   write mar "	.BLKB 32768-<.-",libvec,"_xfer>	; 64 pages total."
-$!   libwriter := write_vax_vtransfer_entry
-$!   gosub read_func_num
-$   write mar "	.END"
-$   close mar
-$   open/write opt 'libopt'
-$   write opt "identification=""",libid," ",libverstr,""""
-$   write opt libobj
-$   write opt libolb,"/lib"
-$   if libref .nes. "" then write opt libref,"/SHARE"
-$   type sys$input:/out=opt:
-!
-! Ensure transfer vector is at beginning of image
-!
-CLUSTER=FIRST
-$   write opt "COLLECT=FIRST,$$",libvec
-$   write opt "GSMATCH=",libvmatch,",",libver
-$   type sys$input:/out=opt:
-!
-! make psects nonshareable so image can be installed.
-!
-PSECT_ATTR=$CHAR_STRING_CONSTANTS,NOWRT
-$   libwrch   := opt
-$   libwriter := write_vax_psect_attr
-$   gosub read_func_num
-$   close opt
-$   macro/obj='libobj' 'libmar'
-$   link/map='libmap'/full/share='libgoal' 'libopt'/option
-$   return
-$
-$! The record writer routine for VAX functions
-$ write_vax_ftransfer_entry:
-$   if info_kind .nes. "FUNCTION" then return
-$   if libentry .eqs ".dummy"
-$   then
-$     write 'libwrch' "	.BLKB 8" ! Dummy is zeroes...
-$   else
-$     write 'libwrch' "	FTRANSFER_ENTRY ",libentry
-$   endif
-$   return
-$! The record writer routine for VAX variables (should never happen!)
-$ write_vax_psect_attr:
-$   if info_kind .nes. "VARIABLE" then return
-$   if libentry .eqs ".dummy" then return
-$   write 'libwrch' "PSECT_ATTR=",libentry,",NOSHR"
-$   return
-$
-$! ----- Common subroutines
-$! -----
-$! The .num file reader.  This one has great responsability.
-$ read_func_num:
-$   open libnum 'libnum'
-$   goto read_nums
-$
-$ read_nums:
-$   libentrynum=0
-$   liblastentry:=false
-$   entrycount=0
-$   loop:
-$     read/end=loop_end/err=loop_end libnum line
-$     entrynum=f$int(f$element(1," ",f$edit(line,"COMPRESS,TRIM")))
-$     entryinfo=f$element(2," ",f$edit(line,"COMPRESS,TRIM"))
-$     curentry=f$element(0," ",f$edit(line,"COMPRESS,TRIM"))
-$     info_exist=f$element(0,":",entryinfo)
-$     info_platforms=","+f$element(1,":",entryinfo)+","
-$     info_kind=f$element(2,":",entryinfo)
-$     info_algorithms=","+f$element(3,":",entryinfo)+","
-$     if info_exist .eqs. "NOEXIST" then goto loop
-$     truesum = 0
-$     falsesum = 0
-$     negatives = 1
-$     plat_i = 0
-$     loop1:
-$       plat_entry = f$element(plat_i,",",info_platforms)
-$       plat_i = plat_i + 1
-$       if plat_entry .eqs. "" then goto loop1
-$       if plat_entry .nes. ","
-$       then
-$         if f$extract(0,1,plat_entry) .nes. "!" then negatives = 0
-$         if f$getsyi("CPU") .lt. 128
-$         then
-$           if plat_entry .eqs. "EXPORT_VAR_AS_FUNCTION" then -
-$             truesum = truesum + 1
-$           if plat_entry .eqs. "!EXPORT_VAR_AS_FUNCTION" then -
-$             falsesum = falsesum + 1
-$         endif
-$         if plat_entry .eqs. "VMS" then truesum = truesum + 1
-$         if plat_entry .eqs. "!VMS" then falsesum = falsesum + 1
-$	  goto loop1
-$       endif
-$     endloop1:
-$!DEBUG!$     if info_platforms - "EXPORT_VAR_AS_FUNCTION" .nes. info_platforms
-$!DEBUG!$     then
-$!DEBUG!$       write sys$output line
-$!DEBUG!$       write sys$output "        truesum = ",truesum,-
-$!DEBUG!		", negatives = ",negatives,", falsesum = ",falsesum
-$!DEBUG!$     endif
-$     if falsesum .ne. 0 then goto loop
-$     if truesum+negatives .eq. 0 then goto loop
-$     alg_i = 0
-$     loop2:
-$       alg_entry = f$element(alg_i,",",info_algorithms)
-$	alg_i = alg_i + 1
-$       if alg_entry .eqs. "" then goto loop2
-$       if alg_entry .nes. ","
-$       then
-$         if alg_entry .eqs. "KRB5" then goto loop ! Special for now
-$	  if alg_entry .eqs. "STATIC_ENGINE" then goto loop ! Special for now
-$         if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
-$	  goto loop2
-$       endif
-$     endloop2:
-$     if info_platforms - "EXPORT_VAR_AS_FUNCTION" .nes. info_platforms
-$     then
-$!DEBUG!$     write sys$output curentry," ; ",entrynum," ; ",entryinfo
-$     endif
-$   redo:
-$     next:=loop
-$     tolibentry=curentry
-$     if libentrynum .ne. entrynum
-$     then
-$       entrycount=entrycount+1
-$       if entrycount .lt. entrynum
-$       then
-$!DEBUG!$         write sys$output "Info: entrycount: ''entrycount', entrynum: ''entrynum' => 0"
-$         tolibentry=".dummy"
-$         next:=redo
-$       endif
-$       if entrycount .gt. entrynum
-$       then
-$         write sys$error "Decreasing library entry numbers!  Can't continue"
-$         write sys$error """",line,""""
-$         close libnum
-$         return
-$       endif
-$       libentry=tolibentry
-$!DEBUG!$       write sys$output entrycount," ",libentry," ",entryinfo
-$       if libentry .nes. "" .and. libwriter .nes. "" then gosub 'libwriter'
-$     else
-$       write sys$error "Info: ""''curentry'"" is an alias for ""''libentry'"".  Overriding..."
-$     endif
-$     libentrynum=entrycount
-$     goto 'next'
-$   loop_end:
-$   close libnum
-$   return
-$
-$! The version number reader
-$ read_version_info:
-$   libver = ""
-$   open/read vf [.CRYPTO]OPENSSLV.H
-$   loop_rvi:
-$     read/err=endloop_rvi/end=endloop_rvi vf rvi_line
-$     if rvi_line - "SHLIB_VERSION_NUMBER """ .eqs. rvi_line then -
-	goto loop_rvi
-$     libverstr = f$element(1,"""",rvi_line)
-$     libvmajor = f$element(0,".",libverstr)
-$     libvminor = f$element(1,".",libverstr)
-$     libvedit = f$element(2,".",libverstr)
-$     libvpatch = f$cvui(0,8,f$extract(1,1,libvedit)+"@")-f$cvui(0,8,"@")
-$     libvedit = f$extract(0,1,libvedit)
-$     libver = f$string(f$int(libvmajor)*100)+","+-
-	f$string(f$int(libvminor)*100+f$int(libvedit)*10+f$int(libvpatch))
-$     if libvmajor .eqs. "0"
-$     then
-$       libvmatch = "EQUAL"
-$     else
-$       ! Starting with the 1.0 release, backward compatibility should be
-$       ! kept, so switch over to the following
-$       libvmatch = "LEQUAL"
-$     endif
-$   endloop_rvi:
-$   close vf
-$   return

VMS/tcpip_shr_decc.opt

@@ -1 +0,0 @@
-sys$share:tcpip$ipc_shr.exe/share

apps/.cvsignore

@@ -3,5 +3,3 @@ Makefile.save
 der_chop
 der_chop.bak
 CA.pl
-*.flc
-semantic.cache

apps/CA.pl.in

@@ -5,7 +5,7 @@
 #      things easier between now and when Eric is convinced to fix it :-)
 #
 # CA -newca ... will setup the right stuff
-# CA -newreq[-nodes] ... will generate a certificate request 
+# CA -newreq ... will generate a certificate request 
 # CA -sign ... will sign the generated request and output 
 #
 # At the end of that grab newreq.pem and newcert.pem (one has the key 
@@ -36,26 +36,16 @@
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
 
-my $openssl;
-if(defined $ENV{OPENSSL}) {
-	$openssl = $ENV{OPENSSL};
-} else {
-	$openssl = "openssl";
-	$ENV{OPENSSL} = $openssl;
-}
-
 $SSLEAY_CONFIG=$ENV{"SSLEAY_CONFIG"};
-$DAYS="-days 365";	# 1 year
-$CADAYS="-days 1095";	# 3 years
-$REQ="$openssl req $SSLEAY_CONFIG";
-$CA="$openssl ca $SSLEAY_CONFIG";
-$VERIFY="$openssl verify";
-$X509="$openssl x509";
-$PKCS12="$openssl pkcs12";
+$DAYS="-days 365";
+$REQ="openssl req $SSLEAY_CONFIG";
+$CA="openssl ca $SSLEAY_CONFIG";
+$VERIFY="openssl verify";
+$X509="openssl x509";
+$PKCS12="openssl pkcs12";
 
 $CATOP="./demoCA";
 $CAKEY="cakey.pem";
-$CAREQ="careq.pem";
 $CACERT="cacert.pem";
 
 $DIRMODE = 0777;
@@ -64,23 +54,18 @@ $RET = 0;
 
 foreach (@ARGV) {
 	if ( /^(-\?|-h|-help)$/ ) {
-	    print STDERR "usage: CA -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify\n";
+	    print STDERR "usage: CA -newcert|-newreq|-newca|-sign|-verify\n";
 	    exit 0;
 	} elsif (/^-newcert$/) {
 	    # create a certificate
-	    system ("$REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS");
+	    system ("$REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Certificate is in newcert.pem, private key is in newkey.pem\n"
+	    print "Certificate (and private key) is in newreq.pem\n"
 	} elsif (/^-newreq$/) {
 	    # create a certificate request
-	    system ("$REQ -new -keyout newkey.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -keyout newreq.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Request is in newreq.pem, private key is in newkey.pem\n";
-	} elsif (/^-newreq-nodes$/) {
-	    # create a certificate request
-	    system ("$REQ -new -nodes -keyout newkey.pem -out newreq.pem $DAYS");
-	    $RET=$?;
-	    print "Request is in newreq.pem, private key is in newkey.pem\n";
+	    print "Request (and private key) is in newreq.pem\n";
 	} elsif (/^-newca$/) {
 		# if explicitly asked for or it doesn't exist then setup the
 		# directory structure that Eric likes to manage things 
@@ -92,11 +77,11 @@ foreach (@ARGV) {
 		mkdir "${CATOP}/crl", $DIRMODE ;
 		mkdir "${CATOP}/newcerts", $DIRMODE;
 		mkdir "${CATOP}/private", $DIRMODE;
-		open OUT, ">${CATOP}/index.txt";
-		close OUT;
-		open OUT, ">${CATOP}/crlnumber";
+		open OUT, ">${CATOP}/serial";
 		print OUT "01\n";
 		close OUT;
+		open OUT, ">${CATOP}/index.txt";
+		close OUT;
 	    }
 	    if ( ! -f "${CATOP}/private/$CAKEY" ) {
 		print "CA certificate filename (or enter to create)\n";
@@ -111,24 +96,18 @@ foreach (@ARGV) {
 		    $RET=$?;
 		} else {
 		    print "Making CA certificate ...\n";
-		    system ("$REQ -new -keyout " .
-			"${CATOP}/private/$CAKEY -out ${CATOP}/$CAREQ");
-		    system ("$CA -create_serial " .
-			"-out ${CATOP}/$CACERT $CADAYS -batch " . 
-			"-keyfile ${CATOP}/private/$CAKEY -selfsign " .
-			"-extensions v3_ca " .
-			"-infiles ${CATOP}/$CAREQ ");
+		    system ("$REQ -new -x509 -keyout " .
+			"${CATOP}/private/$CAKEY -out ${CATOP}/$CACERT $DAYS");
 		    $RET=$?;
 		}
 	    }
 	} elsif (/^-pkcs12$/) {
 	    my $cname = $ARGV[1];
 	    $cname = "My Certificate" unless defined $cname;
-	    system ("$PKCS12 -in newcert.pem -inkey newkey.pem " .
+	    system ("$PKCS12 -in newcert.pem -inkey newreq.pem " .
 			"-certfile ${CATOP}/$CACERT -out newcert.p12 " .
 			"-export -name \"$cname\"");
 	    $RET=$?;
-	    print "PKCS #12 file is in newcert.p12\n";
 	    exit $RET;
 	} elsif (/^-xsign$/) {
 	    system ("$CA -policy policy_anything -infiles newreq.pem");
@@ -164,7 +143,7 @@ foreach (@ARGV) {
 	    }
 	} else {
 	    print STDERR "Unknown arg $_\n";
-	    print STDERR "usage: CA -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify\n";
+	    print STDERR "usage: CA -newcert|-newreq|-newca|-sign|-verify\n";
 	    exit 1;
 	}
 }

apps/CA.sh

@@ -30,18 +30,14 @@
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
 
-if [ -z "$OPENSSL" ]; then OPENSSL=openssl; fi
-
-DAYS="-days 365"	# 1 year
-CADAYS="-days 1095"	# 3 years
-REQ="$OPENSSL req $SSLEAY_CONFIG"
-CA="$OPENSSL ca $SSLEAY_CONFIG"
-VERIFY="$OPENSSL verify"
-X509="$OPENSSL x509"
+DAYS="-days 365"
+REQ="openssl req $SSLEAY_CONFIG"
+CA="openssl ca $SSLEAY_CONFIG"
+VERIFY="openssl verify"
+X509="openssl x509"
 
 CATOP=./demoCA
 CAKEY=./cakey.pem
-CAREQ=./careq.pem
 CACERT=./cacert.pem
 
 for i
@@ -53,15 +49,15 @@ case $i in
     ;;
 -newcert) 
     # create a certificate
-    $REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS
+    $REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS
     RET=$?
-    echo "Certificate is in newcert.pem, private key is in newkey.pem"
+    echo "Certificate (and private key) is in newreq.pem"
     ;;
 -newreq) 
     # create a certificate request
-    $REQ -new -keyout newkey.pem -out newreq.pem $DAYS
+    $REQ -new -keyout newreq.pem -out newreq.pem $DAYS
     RET=$?
-    echo "Request is in newreq.pem, private key is in newkey.pem"
+    echo "Request (and private key) is in newreq.pem"
     ;;
 -newca)     
     # if explicitly asked for or it doesn't exist then setup the directory
@@ -74,7 +70,7 @@ case $i in
 	mkdir ${CATOP}/crl 
 	mkdir ${CATOP}/newcerts
 	mkdir ${CATOP}/private
-	echo "00" > ${CATOP}/serial
+	echo "01" > ${CATOP}/serial
 	touch ${CATOP}/index.txt
     fi
     if [ ! -f ${CATOP}/private/$CAKEY ]; then
@@ -87,11 +83,8 @@ case $i in
 	    RET=$?
 	else
 	    echo "Making CA certificate ..."
-	    $REQ -new -keyout ${CATOP}/private/$CAKEY \
-			   -out ${CATOP}/$CAREQ
-	    $CA -out ${CATOP}/$CACERT $CADAYS -batch \
-			   -keyfile ${CATOP}/private/$CAKEY -selfsign \
-			   -infiles ${CATOP}/$CAREQ 
+	    $REQ -new -x509 -keyout ${CATOP}/private/$CAKEY \
+			   -out ${CATOP}/$CACERT $DAYS
 	    RET=$?
 	fi
     fi

apps/Makefile

@@ -1,923 +0,0 @@
-#
-#  apps/Makefile
-#
-
-DIR=		apps
-TOP=		..
-CC=		cc
-INCLUDES=	-I$(TOP) -I../include $(KRB5_INCLUDES)
-CFLAG=		-g -static
-MAKEFILE=	Makefile
-PERL=		perl
-RM=		rm -f
-# KRB5 stuff
-KRB5_INCLUDES=
-LIBKRB5=
-
-PEX_LIBS=
-EX_LIBS= 
-EXE_EXT= 
-
-SHLIB_TARGET=
-
-CFLAGS= -DMONOLITH $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile makeapps.com install.com
-
-DLIBCRYPTO=../libcrypto.a
-DLIBSSL=../libssl.a
-LIBCRYPTO=-L.. -lcrypto
-LIBSSL=-L.. -lssl
-
-PROGRAM= openssl
-
-SCRIPTS=CA.sh CA.pl
-
-EXE= $(PROGRAM)$(EXE_EXT)
-
-E_EXE=	verify asn1pars req dgst dh dhparam enc passwd gendh errstr \
-	ca crl rsa rsautl dsa dsaparam ec ecparam \
-	x509 genrsa gendsa s_server s_client speed \
-	s_time version pkcs7 crl2pkcs7 sess_id ciphers nseq pkcs12 \
-	pkcs8 spkac smime rand engine ocsp prime
-
-PROGS= $(PROGRAM).c
-
-A_OBJ=apps.o
-A_SRC=apps.c
-S_OBJ=	s_cb.o s_socket.o
-S_SRC=	s_cb.c s_socket.c
-RAND_OBJ=app_rand.o
-RAND_SRC=app_rand.c
-
-E_OBJ=	verify.o asn1pars.o req.o dgst.o dh.o dhparam.o enc.o passwd.o gendh.o errstr.o \
-	ca.o pkcs7.o crl2p7.o crl.o \
-	rsa.o rsautl.o dsa.o dsaparam.o ec.o ecparam.o \
-	x509.o genrsa.o gendsa.o s_server.o s_client.o speed.o \
-	s_time.o $(A_OBJ) $(S_OBJ) $(RAND_OBJ) version.o sess_id.o \
-	ciphers.o nseq.o pkcs12.o pkcs8.o spkac.o smime.o rand.o engine.o \
-	ocsp.o prime.o
-
-E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c passwd.c gendh.c errstr.c ca.c \
-	pkcs7.c crl2p7.c crl.c \
-	rsa.c rsautl.c dsa.c dsaparam.c ec.c ecparam.c \
-	x509.c genrsa.c gendsa.c s_server.c s_client.c speed.c \
-	s_time.c $(A_SRC) $(S_SRC) $(RAND_SRC) version.c sess_id.c \
-	ciphers.c nseq.c pkcs12.c pkcs8.c spkac.c smime.c rand.c engine.c \
-	ocsp.c prime.c
-
-SRC=$(E_SRC)
-
-EXHEADER=
-HEADER=	apps.h progs.h s_apps.h \
-	testdsa.h testrsa.h \
-	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	@(cd ..; $(MAKE) DIRS=$(DIR) all)
-
-all:	exe
-
-exe:	$(EXE)
-
-req: sreq.o $(A_OBJ) $(DLIBCRYPTO)
-	shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \
-		shlib_target="$(SHLIB_TARGET)"; \
-	fi; \
-	$(MAKE) -f $(TOP)/Makefile.shared -e \
-		APPNAME=req OBJECTS="sreq.o $(A_OBJ) $(RAND_OBJ)" \
-		LIBDEPS="$(PEX_LIBS) $(LIBCRYPTO) $(EX_LIBS)" \
-		link_app.$${shlib_target}
-
-sreq.o: req.c 
-	$(CC) -c $(INCLUDES) $(CFLAG) -o sreq.o req.c
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@set -e; for i in $(EXE); \
-	do  \
-	(echo installing $$i; \
-	 cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
-	 chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
-	 mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
-	 done;
-	@set -e; for i in $(SCRIPTS); \
-	do  \
-	(echo installing $$i; \
-	 cp $$i $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new; \
-	 chmod 755 $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new; \
-	 mv -f $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i ); \
-	 done
-	@cp openssl.cnf $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new; \
-	chmod 644 $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new; \
-	mv -f  $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-links:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@if [ -z "$(THIS)" ]; then \
-	    $(MAKE) -f $(TOP)/Makefile reflect THIS=$@; \
-	else \
-	    $(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(SRC); \
-	fi
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff $(EXE)
-	rm -f req
-
-$(DLIBSSL):
-	(cd ..; $(MAKE) DIRS=ssl all)
-
-$(DLIBCRYPTO):
-	(cd ..; $(MAKE) DIRS=crypto all)
-
-$(EXE): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
-	$(RM) $(EXE)
-	shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \
-		shlib_target="$(SHLIB_TARGET)"; \
-	elif [ -n "$(FIPSCANLIB)" ]; then \
-	  FIPSLD_CC="$(CC)"; CC=$(TOP)/fips/fipsld; export CC FIPSLD_CC; \
-	fi; \
-	LIBRARIES="$(LIBSSL) $(LIBKRB5) $(LIBCRYPTO)" ; \
-	[ "x$(FIPSCANLIB)" = "xlibfips" ] && LIBRARIES="$$LIBRARIES -lfips"; \
-	$(MAKE) -f $(TOP)/Makefile.shared -e \
-		CC="$${CC}" APPNAME=$(EXE) OBJECTS="$(PROGRAM).o $(E_OBJ)" \
-		LIBDEPS="$(PEX_LIBS) $$LIBRARIES $(EX_LIBS)" \
-		link_app.$${shlib_target}
-
-progs.h: progs.pl
-	$(PERL) progs.pl $(E_EXE) >progs.h
-	$(RM) $(PROGRAM).o
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-app_rand.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-app_rand.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-app_rand.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-app_rand.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-app_rand.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-app_rand.o: ../include/openssl/evp.h ../include/openssl/fips.h
-app_rand.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-app_rand.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-app_rand.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-app_rand.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-app_rand.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-app_rand.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-app_rand.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-app_rand.o: ../include/openssl/x509_vfy.h app_rand.c apps.h
-apps.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-apps.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-apps.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-apps.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-apps.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-apps.o: ../include/openssl/engine.h ../include/openssl/err.h
-apps.o: ../include/openssl/evp.h ../include/openssl/fips.h
-apps.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-apps.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-apps.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-apps.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-apps.o: ../include/openssl/pkcs12.h ../include/openssl/pkcs7.h
-apps.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-apps.o: ../include/openssl/sha.h ../include/openssl/stack.h
-apps.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-apps.o: ../include/openssl/ui.h ../include/openssl/x509.h
-apps.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.c apps.h
-asn1pars.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-asn1pars.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-asn1pars.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-asn1pars.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-asn1pars.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-asn1pars.o: ../include/openssl/err.h ../include/openssl/evp.h
-asn1pars.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-asn1pars.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-asn1pars.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-asn1pars.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-asn1pars.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-asn1pars.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-asn1pars.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-asn1pars.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-asn1pars.o: ../include/openssl/x509_vfy.h apps.h asn1pars.c
-ca.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-ca.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-ca.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-ca.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-ca.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-ca.o: ../include/openssl/engine.h ../include/openssl/err.h
-ca.o: ../include/openssl/evp.h ../include/openssl/fips.h
-ca.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-ca.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
-ca.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-ca.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-ca.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-ca.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-ca.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-ca.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-ca.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h ca.c
-ciphers.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-ciphers.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-ciphers.o: ../include/openssl/comp.h ../include/openssl/conf.h
-ciphers.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-ciphers.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-ciphers.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-ciphers.o: ../include/openssl/engine.h ../include/openssl/err.h
-ciphers.o: ../include/openssl/evp.h ../include/openssl/fips.h
-ciphers.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-ciphers.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-ciphers.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-ciphers.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-ciphers.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-ciphers.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
-ciphers.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-ciphers.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-ciphers.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-ciphers.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-ciphers.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-ciphers.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-ciphers.o: ciphers.c
-crl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-crl.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-crl.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-crl.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-crl.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-crl.o: ../include/openssl/err.h ../include/openssl/evp.h
-crl.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-crl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-crl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-crl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-crl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-crl.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-crl.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-crl.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-crl.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h crl.c
-crl2p7.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-crl2p7.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-crl2p7.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-crl2p7.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-crl2p7.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-crl2p7.o: ../include/openssl/err.h ../include/openssl/evp.h
-crl2p7.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-crl2p7.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-crl2p7.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-crl2p7.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-crl2p7.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-crl2p7.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-crl2p7.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-crl2p7.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-crl2p7.o: ../include/openssl/x509_vfy.h apps.h crl2p7.c
-dgst.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-dgst.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-dgst.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-dgst.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-dgst.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-dgst.o: ../include/openssl/err.h ../include/openssl/evp.h
-dgst.o: ../include/openssl/fips.h ../include/openssl/hmac.h
-dgst.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-dgst.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dgst.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-dgst.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-dgst.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
-dgst.o: ../include/openssl/sha.h ../include/openssl/stack.h
-dgst.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-dgst.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h dgst.c
-dh.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-dh.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-dh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-dh.o: ../include/openssl/dh.h ../include/openssl/e_os2.h
-dh.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-dh.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-dh.o: ../include/openssl/err.h ../include/openssl/evp.h
-dh.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-dh.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-dh.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-dh.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-dh.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-dh.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-dh.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-dh.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-dh.o: ../include/openssl/x509_vfy.h apps.h dh.c
-dsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-dsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-dsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-dsa.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
-dsa.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-dsa.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-dsa.o: ../include/openssl/err.h ../include/openssl/evp.h
-dsa.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-dsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-dsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-dsa.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-dsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-dsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-dsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-dsa.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-dsa.o: ../include/openssl/x509_vfy.h apps.h dsa.c
-dsaparam.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-dsaparam.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-dsaparam.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-dsaparam.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-dsaparam.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-dsaparam.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-dsaparam.o: ../include/openssl/engine.h ../include/openssl/err.h
-dsaparam.o: ../include/openssl/evp.h ../include/openssl/fips.h
-dsaparam.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-dsaparam.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dsaparam.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-dsaparam.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-dsaparam.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-dsaparam.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-dsaparam.o: ../include/openssl/sha.h ../include/openssl/stack.h
-dsaparam.o: ../include/openssl/store.h ../include/openssl/symhacks.h
-dsaparam.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-dsaparam.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-dsaparam.o: dsaparam.c
-ec.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-ec.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-ec.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-ec.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-ec.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-ec.o: ../include/openssl/err.h ../include/openssl/evp.h
-ec.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-ec.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-ec.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-ec.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-ec.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-ec.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-ec.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-ec.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-ec.o: ../include/openssl/x509_vfy.h apps.h ec.c
-ecparam.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-ecparam.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-ecparam.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-ecparam.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-ecparam.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-ecparam.o: ../include/openssl/engine.h ../include/openssl/err.h
-ecparam.o: ../include/openssl/evp.h ../include/openssl/fips.h
-ecparam.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-ecparam.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-ecparam.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-ecparam.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-ecparam.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
-ecparam.o: ../include/openssl/sha.h ../include/openssl/stack.h
-ecparam.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-ecparam.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-ecparam.o: ecparam.c
-enc.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-enc.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-enc.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-enc.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-enc.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-enc.o: ../include/openssl/err.h ../include/openssl/evp.h
-enc.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-enc.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-enc.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-enc.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-enc.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-enc.o: ../include/openssl/rand.h ../include/openssl/safestack.h
-enc.o: ../include/openssl/sha.h ../include/openssl/stack.h
-enc.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-enc.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h enc.c
-engine.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-engine.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-engine.o: ../include/openssl/comp.h ../include/openssl/conf.h
-engine.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-engine.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-engine.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-engine.o: ../include/openssl/engine.h ../include/openssl/err.h
-engine.o: ../include/openssl/evp.h ../include/openssl/fips.h
-engine.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-engine.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-engine.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-engine.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-engine.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-engine.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
-engine.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-engine.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-engine.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-engine.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-engine.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-engine.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-engine.o: engine.c
-errstr.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-errstr.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-errstr.o: ../include/openssl/comp.h ../include/openssl/conf.h
-errstr.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-errstr.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-errstr.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-errstr.o: ../include/openssl/engine.h ../include/openssl/err.h
-errstr.o: ../include/openssl/evp.h ../include/openssl/fips.h
-errstr.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-errstr.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-errstr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-errstr.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-errstr.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-errstr.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
-errstr.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-errstr.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-errstr.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-errstr.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-errstr.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-errstr.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-errstr.o: errstr.c
-gendh.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-gendh.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-gendh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-gendh.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-gendh.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-gendh.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-gendh.o: ../include/openssl/engine.h ../include/openssl/err.h
-gendh.o: ../include/openssl/evp.h ../include/openssl/fips.h
-gendh.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-gendh.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-gendh.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-gendh.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-gendh.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-gendh.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-gendh.o: ../include/openssl/sha.h ../include/openssl/stack.h
-gendh.o: ../include/openssl/store.h ../include/openssl/symhacks.h
-gendh.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-gendh.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h gendh.c
-gendsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-gendsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-gendsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-gendsa.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
-gendsa.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-gendsa.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-gendsa.o: ../include/openssl/err.h ../include/openssl/evp.h
-gendsa.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-gendsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-gendsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-gendsa.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-gendsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-gendsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-gendsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-gendsa.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-gendsa.o: ../include/openssl/x509_vfy.h apps.h gendsa.c
-genrsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-genrsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-genrsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-genrsa.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-genrsa.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-genrsa.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-genrsa.o: ../include/openssl/engine.h ../include/openssl/err.h
-genrsa.o: ../include/openssl/evp.h ../include/openssl/fips.h
-genrsa.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-genrsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-genrsa.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-genrsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-genrsa.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-genrsa.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-genrsa.o: ../include/openssl/sha.h ../include/openssl/stack.h
-genrsa.o: ../include/openssl/store.h ../include/openssl/symhacks.h
-genrsa.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-genrsa.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-genrsa.o: genrsa.c
-nseq.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-nseq.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-nseq.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-nseq.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-nseq.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-nseq.o: ../include/openssl/err.h ../include/openssl/evp.h
-nseq.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-nseq.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-nseq.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-nseq.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-nseq.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-nseq.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-nseq.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-nseq.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-nseq.o: ../include/openssl/x509_vfy.h apps.h nseq.c
-ocsp.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-ocsp.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-ocsp.o: ../include/openssl/comp.h ../include/openssl/conf.h
-ocsp.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-ocsp.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-ocsp.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-ocsp.o: ../include/openssl/engine.h ../include/openssl/err.h
-ocsp.o: ../include/openssl/evp.h ../include/openssl/fips.h
-ocsp.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-ocsp.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-ocsp.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-ocsp.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-ocsp.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-ocsp.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
-ocsp.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-ocsp.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-ocsp.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-ocsp.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-ocsp.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-ocsp.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-ocsp.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h ocsp.c
-openssl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-openssl.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-openssl.o: ../include/openssl/comp.h ../include/openssl/conf.h
-openssl.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-openssl.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-openssl.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-openssl.o: ../include/openssl/engine.h ../include/openssl/err.h
-openssl.o: ../include/openssl/evp.h ../include/openssl/fips.h
-openssl.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-openssl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-openssl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-openssl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-openssl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-openssl.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
-openssl.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-openssl.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-openssl.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-openssl.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-openssl.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-openssl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-openssl.o: openssl.c progs.h s_apps.h
-passwd.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-passwd.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-passwd.o: ../include/openssl/crypto.h ../include/openssl/des.h
-passwd.o: ../include/openssl/des_old.h ../include/openssl/e_os2.h
-passwd.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-passwd.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-passwd.o: ../include/openssl/err.h ../include/openssl/evp.h
-passwd.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-passwd.o: ../include/openssl/md5.h ../include/openssl/obj_mac.h
-passwd.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-passwd.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-passwd.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-passwd.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-passwd.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-passwd.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-passwd.o: ../include/openssl/ui_compat.h ../include/openssl/x509.h
-passwd.o: ../include/openssl/x509_vfy.h apps.h passwd.c
-pkcs12.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-pkcs12.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-pkcs12.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-pkcs12.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-pkcs12.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-pkcs12.o: ../include/openssl/err.h ../include/openssl/evp.h
-pkcs12.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-pkcs12.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-pkcs12.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-pkcs12.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-pkcs12.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
-pkcs12.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
-pkcs12.o: ../include/openssl/sha.h ../include/openssl/stack.h
-pkcs12.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-pkcs12.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-pkcs12.o: pkcs12.c
-pkcs7.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-pkcs7.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-pkcs7.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-pkcs7.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-pkcs7.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-pkcs7.o: ../include/openssl/err.h ../include/openssl/evp.h
-pkcs7.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-pkcs7.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-pkcs7.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-pkcs7.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-pkcs7.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-pkcs7.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-pkcs7.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-pkcs7.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-pkcs7.o: ../include/openssl/x509_vfy.h apps.h pkcs7.c
-pkcs8.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-pkcs8.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-pkcs8.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-pkcs8.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-pkcs8.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-pkcs8.o: ../include/openssl/err.h ../include/openssl/evp.h
-pkcs8.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-pkcs8.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-pkcs8.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-pkcs8.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-pkcs8.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
-pkcs8.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
-pkcs8.o: ../include/openssl/sha.h ../include/openssl/stack.h
-pkcs8.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-pkcs8.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h pkcs8.c
-prime.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-prime.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-prime.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-prime.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-prime.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-prime.o: ../include/openssl/engine.h ../include/openssl/evp.h
-prime.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-prime.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-prime.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-prime.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
-prime.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-prime.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-prime.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-prime.o: ../include/openssl/x509_vfy.h apps.h prime.c
-rand.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-rand.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-rand.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-rand.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-rand.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-rand.o: ../include/openssl/err.h ../include/openssl/evp.h
-rand.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-rand.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-rand.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-rand.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
-rand.o: ../include/openssl/rand.h ../include/openssl/safestack.h
-rand.o: ../include/openssl/sha.h ../include/openssl/stack.h
-rand.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-rand.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h rand.c
-req.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-req.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-req.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-req.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-req.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-req.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-req.o: ../include/openssl/engine.h ../include/openssl/err.h
-req.o: ../include/openssl/evp.h ../include/openssl/fips.h
-req.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-req.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-req.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-req.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-req.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-req.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-req.o: ../include/openssl/sha.h ../include/openssl/stack.h
-req.o: ../include/openssl/store.h ../include/openssl/symhacks.h
-req.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-req.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-req.o: ../include/openssl/x509v3.h apps.h req.c
-rsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-rsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-rsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-rsa.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-rsa.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-rsa.o: ../include/openssl/engine.h ../include/openssl/err.h
-rsa.o: ../include/openssl/evp.h ../include/openssl/fips.h
-rsa.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-rsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-rsa.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-rsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-rsa.o: ../include/openssl/pkcs7.h ../include/openssl/rsa.h
-rsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-rsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-rsa.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-rsa.o: ../include/openssl/x509_vfy.h apps.h rsa.c
-rsautl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-rsautl.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-rsautl.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-rsautl.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-rsautl.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-rsautl.o: ../include/openssl/err.h ../include/openssl/evp.h
-rsautl.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-rsautl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-rsautl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-rsautl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-rsautl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-rsautl.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-rsautl.o: ../include/openssl/sha.h ../include/openssl/stack.h
-rsautl.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-rsautl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-rsautl.o: rsautl.c
-s_cb.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-s_cb.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-s_cb.o: ../include/openssl/comp.h ../include/openssl/conf.h
-s_cb.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-s_cb.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-s_cb.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-s_cb.o: ../include/openssl/engine.h ../include/openssl/err.h
-s_cb.o: ../include/openssl/evp.h ../include/openssl/fips.h
-s_cb.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-s_cb.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_cb.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_cb.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-s_cb.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-s_cb.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
-s_cb.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_cb.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_cb.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_cb.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-s_cb.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-s_cb.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h s_apps.h
-s_cb.o: s_cb.c
-s_client.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-s_client.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-s_client.o: ../include/openssl/comp.h ../include/openssl/conf.h
-s_client.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-s_client.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-s_client.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-s_client.o: ../include/openssl/engine.h ../include/openssl/err.h
-s_client.o: ../include/openssl/evp.h ../include/openssl/fips.h
-s_client.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-s_client.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_client.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_client.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-s_client.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-s_client.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
-s_client.o: ../include/openssl/rand.h ../include/openssl/safestack.h
-s_client.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_client.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_client.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_client.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_client.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-s_client.o: ../include/openssl/x509_vfy.h apps.h s_apps.h s_client.c timeouts.h
-s_server.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-s_server.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-s_server.o: ../include/openssl/comp.h ../include/openssl/conf.h
-s_server.o: ../include/openssl/crypto.h ../include/openssl/dh.h
-s_server.o: ../include/openssl/dsa.h ../include/openssl/dtls1.h
-s_server.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-s_server.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-s_server.o: ../include/openssl/engine.h ../include/openssl/err.h
-s_server.o: ../include/openssl/evp.h ../include/openssl/fips.h
-s_server.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-s_server.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_server.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_server.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-s_server.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-s_server.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
-s_server.o: ../include/openssl/rand.h ../include/openssl/rsa.h
-s_server.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_server.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_server.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_server.o: ../include/openssl/stack.h ../include/openssl/store.h
-s_server.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_server.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-s_server.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-s_server.o: s_apps.h s_server.c timeouts.h
-s_socket.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-s_socket.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-s_socket.o: ../include/openssl/comp.h ../include/openssl/conf.h
-s_socket.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-s_socket.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-s_socket.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-s_socket.o: ../include/openssl/engine.h ../include/openssl/evp.h
-s_socket.o: ../include/openssl/fips.h ../include/openssl/kssl.h
-s_socket.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-s_socket.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-s_socket.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-s_socket.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_socket.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
-s_socket.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-s_socket.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_socket.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_socket.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_socket.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_socket.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-s_socket.o: ../include/openssl/x509_vfy.h apps.h s_apps.h s_socket.c
-s_time.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-s_time.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-s_time.o: ../include/openssl/comp.h ../include/openssl/conf.h
-s_time.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-s_time.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-s_time.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-s_time.o: ../include/openssl/engine.h ../include/openssl/err.h
-s_time.o: ../include/openssl/evp.h ../include/openssl/fips.h
-s_time.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-s_time.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_time.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_time.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-s_time.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-s_time.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
-s_time.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_time.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_time.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_time.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-s_time.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-s_time.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-s_time.o: s_apps.h s_time.c
-sess_id.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-sess_id.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-sess_id.o: ../include/openssl/comp.h ../include/openssl/conf.h
-sess_id.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-sess_id.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-sess_id.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-sess_id.o: ../include/openssl/engine.h ../include/openssl/err.h
-sess_id.o: ../include/openssl/evp.h ../include/openssl/fips.h
-sess_id.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-sess_id.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-sess_id.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-sess_id.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-sess_id.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-sess_id.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
-sess_id.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-sess_id.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-sess_id.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-sess_id.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-sess_id.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-sess_id.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-sess_id.o: sess_id.c
-smime.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-smime.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-smime.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-smime.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-smime.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-smime.o: ../include/openssl/err.h ../include/openssl/evp.h
-smime.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-smime.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-smime.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-smime.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-smime.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-smime.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-smime.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-smime.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-smime.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-smime.o: smime.c
-speed.o: ../e_os.h ../include/openssl/aes.h ../include/openssl/asn1.h
-speed.o: ../include/openssl/bio.h ../include/openssl/blowfish.h
-speed.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-speed.o: ../include/openssl/cast.h ../include/openssl/conf.h
-speed.o: ../include/openssl/crypto.h ../include/openssl/des.h
-speed.o: ../include/openssl/des_old.h ../include/openssl/dsa.h
-speed.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-speed.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-speed.o: ../include/openssl/engine.h ../include/openssl/err.h
-speed.o: ../include/openssl/evp.h ../include/openssl/fips.h
-speed.o: ../include/openssl/hmac.h ../include/openssl/idea.h
-speed.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-speed.o: ../include/openssl/md4.h ../include/openssl/md5.h
-speed.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-speed.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-speed.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
-speed.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-speed.o: ../include/openssl/rc4.h ../include/openssl/ripemd.h
-speed.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-speed.o: ../include/openssl/sha.h ../include/openssl/stack.h
-speed.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-speed.o: ../include/openssl/ui.h ../include/openssl/ui_compat.h
-speed.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h speed.c
-speed.o: testdsa.h testrsa.h
-spkac.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-spkac.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-spkac.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-spkac.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-spkac.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-spkac.o: ../include/openssl/err.h ../include/openssl/evp.h
-spkac.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-spkac.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-spkac.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-spkac.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-spkac.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-spkac.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-spkac.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-spkac.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-spkac.o: ../include/openssl/x509_vfy.h apps.h spkac.c
-verify.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-verify.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-verify.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-verify.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-verify.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-verify.o: ../include/openssl/err.h ../include/openssl/evp.h
-verify.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-verify.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-verify.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-verify.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-verify.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-verify.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-verify.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-verify.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-verify.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-verify.o: verify.c
-version.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-version.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-version.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-version.o: ../include/openssl/crypto.h ../include/openssl/des.h
-version.o: ../include/openssl/des_old.h ../include/openssl/e_os2.h
-version.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-version.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-version.o: ../include/openssl/evp.h ../include/openssl/fips.h
-version.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-version.o: ../include/openssl/md2.h ../include/openssl/obj_mac.h
-version.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-version.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-version.o: ../include/openssl/pkcs7.h ../include/openssl/rc4.h
-version.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-version.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-version.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-version.o: ../include/openssl/ui_compat.h ../include/openssl/x509.h
-version.o: ../include/openssl/x509_vfy.h apps.h version.c
-x509.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-x509.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-x509.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-x509.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
-x509.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-x509.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-x509.o: ../include/openssl/err.h ../include/openssl/evp.h
-x509.o: ../include/openssl/fips.h ../include/openssl/lhash.h
-x509.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-x509.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-x509.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-x509.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-x509.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-x509.o: ../include/openssl/sha.h ../include/openssl/stack.h
-x509.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-x509.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-x509.o: ../include/openssl/x509v3.h apps.h x509.c

apps/Makefile.ssl

@@ -0,0 +1,964 @@
+#
+#  apps/Makefile.ssl
+#
+
+DIR=		apps
+TOP=		..
+CC=		cc
+INCLUDES=	-I../include
+CFLAG=		-g -static
+INSTALL_PREFIX=
+INSTALLTOP=	/usr/local/ssl
+OPENSSLDIR=	/usr/local/ssl
+MAKE=		make -f Makefile.ssl
+MAKEDEPEND=	$(TOP)/util/domd $(TOP)
+MAKEFILE=	Makefile.ssl
+PERL=/usr/local/bin/perl
+RM=		rm -f
+
+PEX_LIBS=
+EX_LIBS= 
+
+CFLAGS= -DMONOLITH $(INCLUDES) $(CFLAG)
+
+GENERAL=Makefile makeapps.com install.com
+
+DLIBCRYPTO=../libcrypto.a
+DLIBSSL=../libssl.a
+LIBCRYPTO=-L.. -lcrypto
+LIBSSL=-L.. -lssl
+
+PROGRAM= openssl
+
+SCRIPTS=CA.sh CA.pl der_chop
+
+EXE= $(PROGRAM)
+
+E_EXE=	verify asn1pars req dgst dh dhparam enc passwd gendh errstr \
+	ca crl rsa rsautl dsa dsaparam \
+	x509 genrsa gendsa s_server s_client speed \
+	s_time version pkcs7 crl2pkcs7 sess_id ciphers nseq pkcs12 \
+	pkcs8 spkac smime rand
+
+PROGS= $(PROGRAM).c
+
+A_OBJ=apps.o
+A_SRC=apps.c
+S_OBJ=	s_cb.o s_socket.o
+S_SRC=	s_cb.c s_socket.c
+RAND_OBJ=app_rand.o
+RAND_SRC=app_rand.c
+
+E_OBJ=	verify.o asn1pars.o req.o dgst.o dh.o dhparam.o enc.o passwd.o gendh.o errstr.o \
+	ca.o pkcs7.o crl2p7.o crl.o \
+	rsa.o rsautl.o dsa.o dsaparam.o \
+	x509.o genrsa.o gendsa.o s_server.o s_client.o speed.o \
+	s_time.o $(A_OBJ) $(S_OBJ) $(RAND_OBJ) version.o sess_id.o \
+	ciphers.o nseq.o pkcs12.o pkcs8.o spkac.o smime.o rand.o
+
+E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c passwd.c gendh.c errstr.c ca.c \
+	pkcs7.c crl2p7.c crl.c \
+	rsa.c rsautl.c dsa.c dsaparam.c \
+	x509.c genrsa.c gendsa.c s_server.c s_client.c speed.c \
+	s_time.c $(A_SRC) $(S_SRC) $(RAND_SRC) version.c sess_id.c \
+	ciphers.c nseq.c pkcs12.c pkcs8.c spkac.c smime.c rand.c
+
+SRC=$(E_SRC)
+
+EXHEADER=
+HEADER=	apps.h progs.h s_apps.h \
+	testdsa.h testrsa.h \
+	$(EXHEADER)
+
+ALL=    $(GENERAL) $(SRC) $(HEADER)
+
+top:
+	@(cd ..; $(MAKE) DIRS=$(DIR) all)
+
+all:	exe
+
+exe:	$(EXE)
+
+req: sreq.o $(A_OBJ) $(DLIBCRYPTO)
+	$(CC) -o req $(CFLAG) sreq.o $(A_OBJ) $(RAND_OBJ) $(PEX_LIBS) $(LIBCRYPTO) $(EX_LIBS)
+
+sreq.o: req.c 
+	$(CC) -c $(INCLUDES) $(CFLAG) -o sreq.o req.c
+
+files:
+	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO
+
+install:
+	@for i in $(EXE); \
+	do  \
+	(echo installing $$i; \
+	 cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i; \
+	 chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+	 done;
+	@for i in $(SCRIPTS); \
+	do  \
+	(echo installing $$i; \
+	 cp $$i $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i; \
+	 chmod 755 $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i ); \
+	 done
+	@cp openssl.cnf $(INSTALL_PREFIX)$(OPENSSLDIR); \
+	chmod 644 $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf
+
+tags:
+	ctags $(SRC)
+
+tests:
+
+links:
+	@$(TOP)/util/point.sh Makefile.ssl Makefile
+
+lint:
+	lint -DLINT $(INCLUDES) $(SRC)>fluff
+
+depend:
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(SRC)
+
+dclean:
+	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
+	mv -f Makefile.new $(MAKEFILE)
+
+clean:
+	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff $(EXE)
+	rm -f req
+
+$(DLIBSSL):
+	(cd ../ssl; $(MAKE))
+
+$(DLIBCRYPTO):
+	(cd ../crypto; $(MAKE))
+
+$(PROGRAM): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
+	$(RM) $(PROGRAM)
+	$(CC) -o $(PROGRAM) $(CFLAGS) $(PROGRAM).o $(E_OBJ) $(PEX_LIBS) $(LIBSSL) $(LIBCRYPTO) $(EX_LIBS)
+	-(cd ..; OPENSSL="`pwd`/apps/openssl"; export OPENSSL; $(PERL) tools/c_rehash certs)
+
+progs.h: progs.pl
+	$(PERL) progs.pl $(E_EXE) >progs.h
+	$(RM) $(PROGRAM).o
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+app_rand.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+app_rand.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+app_rand.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+app_rand.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+app_rand.o: ../include/openssl/des.h ../include/openssl/dh.h
+app_rand.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+app_rand.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+app_rand.o: ../include/openssl/evp.h ../include/openssl/idea.h
+app_rand.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+app_rand.o: ../include/openssl/md4.h ../include/openssl/md5.h
+app_rand.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+app_rand.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+app_rand.o: ../include/openssl/opensslv.h ../include/openssl/pkcs7.h
+app_rand.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+app_rand.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+app_rand.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+app_rand.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+app_rand.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+app_rand.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+apps.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+apps.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+apps.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+apps.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+apps.o: ../include/openssl/des.h ../include/openssl/dh.h
+apps.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+apps.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+apps.o: ../include/openssl/err.h ../include/openssl/evp.h
+apps.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+apps.o: ../include/openssl/md2.h ../include/openssl/md4.h
+apps.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+apps.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+apps.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+apps.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+apps.o: ../include/openssl/pkcs12.h ../include/openssl/pkcs7.h
+apps.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+apps.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+apps.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+apps.o: ../include/openssl/sha.h ../include/openssl/stack.h
+apps.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+apps.o: ../include/openssl/x509_vfy.h apps.h
+asn1pars.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+asn1pars.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+asn1pars.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+asn1pars.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+asn1pars.o: ../include/openssl/des.h ../include/openssl/dh.h
+asn1pars.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+asn1pars.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+asn1pars.o: ../include/openssl/err.h ../include/openssl/evp.h
+asn1pars.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+asn1pars.o: ../include/openssl/md2.h ../include/openssl/md4.h
+asn1pars.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+asn1pars.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+asn1pars.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+asn1pars.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+asn1pars.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
+asn1pars.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+asn1pars.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+asn1pars.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+asn1pars.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+asn1pars.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+ca.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+ca.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+ca.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+ca.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+ca.o: ../include/openssl/des.h ../include/openssl/dh.h ../include/openssl/dsa.h
+ca.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+ca.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+ca.o: ../include/openssl/err.h ../include/openssl/evp.h
+ca.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+ca.o: ../include/openssl/md2.h ../include/openssl/md4.h
+ca.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+ca.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+ca.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+ca.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+ca.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+ca.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+ca.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+ca.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+ca.o: ../include/openssl/sha.h ../include/openssl/stack.h
+ca.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+ca.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+ca.o: ../include/openssl/x509v3.h apps.h
+ciphers.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+ciphers.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+ciphers.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+ciphers.o: ../include/openssl/comp.h ../include/openssl/conf.h
+ciphers.o: ../include/openssl/crypto.h ../include/openssl/des.h
+ciphers.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+ciphers.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+ciphers.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+ciphers.o: ../include/openssl/evp.h ../include/openssl/idea.h
+ciphers.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+ciphers.o: ../include/openssl/md4.h ../include/openssl/md5.h
+ciphers.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+ciphers.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+ciphers.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+ciphers.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+ciphers.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+ciphers.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+ciphers.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+ciphers.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+ciphers.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+ciphers.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+ciphers.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+ciphers.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+crl.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+crl.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+crl.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+crl.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+crl.o: ../include/openssl/des.h ../include/openssl/dh.h
+crl.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+crl.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+crl.o: ../include/openssl/err.h ../include/openssl/evp.h
+crl.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+crl.o: ../include/openssl/md2.h ../include/openssl/md4.h
+crl.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+crl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+crl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+crl.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+crl.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
+crl.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+crl.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+crl.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+crl.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+crl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+crl.o: ../include/openssl/x509v3.h apps.h
+crl2p7.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+crl2p7.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+crl2p7.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+crl2p7.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+crl2p7.o: ../include/openssl/des.h ../include/openssl/dh.h
+crl2p7.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+crl2p7.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+crl2p7.o: ../include/openssl/err.h ../include/openssl/evp.h
+crl2p7.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+crl2p7.o: ../include/openssl/md2.h ../include/openssl/md4.h
+crl2p7.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+crl2p7.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+crl2p7.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+crl2p7.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+crl2p7.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
+crl2p7.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+crl2p7.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+crl2p7.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+crl2p7.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+crl2p7.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+dgst.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+dgst.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+dgst.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+dgst.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+dgst.o: ../include/openssl/des.h ../include/openssl/dh.h
+dgst.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+dgst.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+dgst.o: ../include/openssl/engine.h ../include/openssl/err.h
+dgst.o: ../include/openssl/evp.h ../include/openssl/idea.h
+dgst.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+dgst.o: ../include/openssl/md4.h ../include/openssl/md5.h
+dgst.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+dgst.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+dgst.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+dgst.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+dgst.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+dgst.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+dgst.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+dgst.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+dgst.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+dgst.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+dh.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+dh.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+dh.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+dh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+dh.o: ../include/openssl/des.h ../include/openssl/dh.h ../include/openssl/dsa.h
+dh.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+dh.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+dh.o: ../include/openssl/err.h ../include/openssl/evp.h
+dh.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+dh.o: ../include/openssl/md2.h ../include/openssl/md4.h
+dh.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+dh.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+dh.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+dh.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+dh.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+dh.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+dh.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+dh.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+dh.o: ../include/openssl/sha.h ../include/openssl/stack.h
+dh.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+dh.o: ../include/openssl/x509_vfy.h apps.h
+dsa.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+dsa.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+dsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+dsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+dsa.o: ../include/openssl/des.h ../include/openssl/dh.h
+dsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+dsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+dsa.o: ../include/openssl/engine.h ../include/openssl/err.h
+dsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
+dsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+dsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
+dsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+dsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+dsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+dsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+dsa.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+dsa.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+dsa.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+dsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+dsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+dsa.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+dsaparam.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+dsaparam.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+dsaparam.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+dsaparam.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+dsaparam.o: ../include/openssl/des.h ../include/openssl/dh.h
+dsaparam.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+dsaparam.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+dsaparam.o: ../include/openssl/engine.h ../include/openssl/err.h
+dsaparam.o: ../include/openssl/evp.h ../include/openssl/idea.h
+dsaparam.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+dsaparam.o: ../include/openssl/md4.h ../include/openssl/md5.h
+dsaparam.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+dsaparam.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+dsaparam.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+dsaparam.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+dsaparam.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+dsaparam.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+dsaparam.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+dsaparam.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+dsaparam.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+dsaparam.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+enc.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+enc.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+enc.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+enc.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+enc.o: ../include/openssl/des.h ../include/openssl/dh.h
+enc.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+enc.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+enc.o: ../include/openssl/engine.h ../include/openssl/err.h
+enc.o: ../include/openssl/evp.h ../include/openssl/idea.h
+enc.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+enc.o: ../include/openssl/md4.h ../include/openssl/md5.h
+enc.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+enc.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+enc.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+enc.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+enc.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+enc.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+enc.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+enc.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+enc.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+enc.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+errstr.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+errstr.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+errstr.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+errstr.o: ../include/openssl/comp.h ../include/openssl/conf.h
+errstr.o: ../include/openssl/crypto.h ../include/openssl/des.h
+errstr.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+errstr.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+errstr.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+errstr.o: ../include/openssl/evp.h ../include/openssl/idea.h
+errstr.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+errstr.o: ../include/openssl/md4.h ../include/openssl/md5.h
+errstr.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+errstr.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+errstr.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+errstr.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+errstr.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+errstr.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+errstr.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+errstr.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+errstr.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+errstr.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+errstr.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+errstr.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+gendh.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+gendh.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+gendh.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+gendh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+gendh.o: ../include/openssl/des.h ../include/openssl/dh.h
+gendh.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+gendh.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+gendh.o: ../include/openssl/engine.h ../include/openssl/err.h
+gendh.o: ../include/openssl/evp.h ../include/openssl/idea.h
+gendh.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+gendh.o: ../include/openssl/md4.h ../include/openssl/md5.h
+gendh.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+gendh.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+gendh.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+gendh.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+gendh.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+gendh.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+gendh.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+gendh.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+gendh.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+gendh.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+gendsa.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+gendsa.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+gendsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+gendsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+gendsa.o: ../include/openssl/des.h ../include/openssl/dh.h
+gendsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+gendsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+gendsa.o: ../include/openssl/engine.h ../include/openssl/err.h
+gendsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
+gendsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+gendsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
+gendsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+gendsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+gendsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+gendsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+gendsa.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+gendsa.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+gendsa.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+gendsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+gendsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+gendsa.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+genrsa.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+genrsa.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+genrsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+genrsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+genrsa.o: ../include/openssl/des.h ../include/openssl/dh.h
+genrsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+genrsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+genrsa.o: ../include/openssl/engine.h ../include/openssl/err.h
+genrsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
+genrsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+genrsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
+genrsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+genrsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+genrsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+genrsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+genrsa.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+genrsa.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+genrsa.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+genrsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+genrsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+genrsa.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+nseq.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+nseq.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+nseq.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+nseq.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+nseq.o: ../include/openssl/des.h ../include/openssl/dh.h
+nseq.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+nseq.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+nseq.o: ../include/openssl/err.h ../include/openssl/evp.h
+nseq.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+nseq.o: ../include/openssl/md2.h ../include/openssl/md4.h
+nseq.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+nseq.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+nseq.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+nseq.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+nseq.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
+nseq.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+nseq.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+nseq.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+nseq.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+nseq.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+openssl.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+openssl.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+openssl.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+openssl.o: ../include/openssl/comp.h ../include/openssl/conf.h
+openssl.o: ../include/openssl/crypto.h ../include/openssl/des.h
+openssl.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+openssl.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+openssl.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+openssl.o: ../include/openssl/evp.h ../include/openssl/idea.h
+openssl.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+openssl.o: ../include/openssl/md4.h ../include/openssl/md5.h
+openssl.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+openssl.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+openssl.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+openssl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+openssl.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+openssl.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+openssl.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+openssl.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+openssl.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+openssl.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+openssl.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+openssl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+openssl.o: progs.h s_apps.h
+passwd.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+passwd.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+passwd.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+passwd.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+passwd.o: ../include/openssl/des.h ../include/openssl/dh.h
+passwd.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+passwd.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+passwd.o: ../include/openssl/err.h ../include/openssl/evp.h
+passwd.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+passwd.o: ../include/openssl/md2.h ../include/openssl/md4.h
+passwd.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+passwd.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+passwd.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+passwd.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+passwd.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+passwd.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+passwd.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+passwd.o: ../include/openssl/sha.h ../include/openssl/stack.h
+passwd.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+passwd.o: ../include/openssl/x509_vfy.h apps.h
+pkcs12.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+pkcs12.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+pkcs12.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+pkcs12.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+pkcs12.o: ../include/openssl/des.h ../include/openssl/dh.h
+pkcs12.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+pkcs12.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+pkcs12.o: ../include/openssl/engine.h ../include/openssl/err.h
+pkcs12.o: ../include/openssl/evp.h ../include/openssl/idea.h
+pkcs12.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+pkcs12.o: ../include/openssl/md4.h ../include/openssl/md5.h
+pkcs12.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+pkcs12.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+pkcs12.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+pkcs12.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
+pkcs12.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+pkcs12.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+pkcs12.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+pkcs12.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+pkcs12.o: ../include/openssl/sha.h ../include/openssl/stack.h
+pkcs12.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+pkcs12.o: ../include/openssl/x509_vfy.h apps.h
+pkcs7.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+pkcs7.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+pkcs7.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+pkcs7.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+pkcs7.o: ../include/openssl/des.h ../include/openssl/dh.h
+pkcs7.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+pkcs7.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+pkcs7.o: ../include/openssl/engine.h ../include/openssl/err.h
+pkcs7.o: ../include/openssl/evp.h ../include/openssl/idea.h
+pkcs7.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+pkcs7.o: ../include/openssl/md4.h ../include/openssl/md5.h
+pkcs7.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+pkcs7.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+pkcs7.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+pkcs7.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+pkcs7.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+pkcs7.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+pkcs7.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+pkcs7.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+pkcs7.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+pkcs7.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+pkcs8.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+pkcs8.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+pkcs8.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+pkcs8.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+pkcs8.o: ../include/openssl/des.h ../include/openssl/dh.h
+pkcs8.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+pkcs8.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+pkcs8.o: ../include/openssl/engine.h ../include/openssl/err.h
+pkcs8.o: ../include/openssl/evp.h ../include/openssl/idea.h
+pkcs8.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+pkcs8.o: ../include/openssl/md4.h ../include/openssl/md5.h
+pkcs8.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+pkcs8.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+pkcs8.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+pkcs8.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
+pkcs8.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+pkcs8.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+pkcs8.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+pkcs8.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+pkcs8.o: ../include/openssl/sha.h ../include/openssl/stack.h
+pkcs8.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+pkcs8.o: ../include/openssl/x509_vfy.h apps.h
+rand.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+rand.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+rand.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+rand.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+rand.o: ../include/openssl/des.h ../include/openssl/dh.h
+rand.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+rand.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+rand.o: ../include/openssl/engine.h ../include/openssl/err.h
+rand.o: ../include/openssl/evp.h ../include/openssl/idea.h
+rand.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+rand.o: ../include/openssl/md4.h ../include/openssl/md5.h
+rand.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+rand.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+rand.o: ../include/openssl/opensslv.h ../include/openssl/pkcs7.h
+rand.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+rand.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+rand.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+rand.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+rand.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+rand.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+req.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+req.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+req.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+req.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+req.o: ../include/openssl/des.h ../include/openssl/dh.h
+req.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+req.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+req.o: ../include/openssl/engine.h ../include/openssl/err.h
+req.o: ../include/openssl/evp.h ../include/openssl/idea.h
+req.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+req.o: ../include/openssl/md4.h ../include/openssl/md5.h
+req.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+req.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+req.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+req.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+req.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+req.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+req.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+req.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+req.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+req.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+req.o: ../include/openssl/x509v3.h apps.h
+rsa.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+rsa.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+rsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+rsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+rsa.o: ../include/openssl/des.h ../include/openssl/dh.h
+rsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+rsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+rsa.o: ../include/openssl/engine.h ../include/openssl/err.h
+rsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
+rsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+rsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
+rsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+rsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+rsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+rsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+rsa.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+rsa.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+rsa.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+rsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+rsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+rsa.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+rsautl.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+rsautl.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+rsautl.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+rsautl.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+rsautl.o: ../include/openssl/des.h ../include/openssl/dh.h
+rsautl.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+rsautl.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+rsautl.o: ../include/openssl/engine.h ../include/openssl/err.h
+rsautl.o: ../include/openssl/evp.h ../include/openssl/idea.h
+rsautl.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+rsautl.o: ../include/openssl/md4.h ../include/openssl/md5.h
+rsautl.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+rsautl.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+rsautl.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+rsautl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+rsautl.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+rsautl.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+rsautl.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+rsautl.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+rsautl.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+rsautl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+s_cb.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+s_cb.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+s_cb.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+s_cb.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_cb.o: ../include/openssl/crypto.h ../include/openssl/des.h
+s_cb.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+s_cb.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+s_cb.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+s_cb.o: ../include/openssl/evp.h ../include/openssl/idea.h
+s_cb.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+s_cb.o: ../include/openssl/md4.h ../include/openssl/md5.h
+s_cb.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+s_cb.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+s_cb.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+s_cb.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_cb.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+s_cb.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+s_cb.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+s_cb.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+s_cb.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+s_cb.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+s_cb.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_cb.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h s_apps.h
+s_client.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+s_client.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+s_client.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+s_client.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_client.o: ../include/openssl/crypto.h ../include/openssl/des.h
+s_client.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+s_client.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+s_client.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+s_client.o: ../include/openssl/err.h ../include/openssl/evp.h
+s_client.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+s_client.o: ../include/openssl/md2.h ../include/openssl/md4.h
+s_client.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+s_client.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+s_client.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_client.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+s_client.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+s_client.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+s_client.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+s_client.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+s_client.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+s_client.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+s_client.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+s_client.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_client.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+s_client.o: s_apps.h
+s_server.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+s_server.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+s_server.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+s_server.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_server.o: ../include/openssl/crypto.h ../include/openssl/des.h
+s_server.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+s_server.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+s_server.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+s_server.o: ../include/openssl/err.h ../include/openssl/evp.h
+s_server.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+s_server.o: ../include/openssl/md2.h ../include/openssl/md4.h
+s_server.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+s_server.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+s_server.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_server.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+s_server.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+s_server.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+s_server.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+s_server.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+s_server.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+s_server.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+s_server.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+s_server.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_server.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+s_server.o: s_apps.h
+s_socket.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+s_socket.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+s_socket.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+s_socket.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_socket.o: ../include/openssl/crypto.h ../include/openssl/des.h
+s_socket.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+s_socket.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+s_socket.o: ../include/openssl/e_os2.h ../include/openssl/evp.h
+s_socket.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+s_socket.o: ../include/openssl/md2.h ../include/openssl/md4.h
+s_socket.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+s_socket.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+s_socket.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_socket.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+s_socket.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
+s_socket.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+s_socket.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+s_socket.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_socket.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_socket.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_socket.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_socket.o: ../include/openssl/tls1.h ../include/openssl/x509.h
+s_socket.o: ../include/openssl/x509_vfy.h apps.h s_apps.h
+s_time.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+s_time.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+s_time.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+s_time.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_time.o: ../include/openssl/crypto.h ../include/openssl/des.h
+s_time.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+s_time.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+s_time.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+s_time.o: ../include/openssl/evp.h ../include/openssl/idea.h
+s_time.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+s_time.o: ../include/openssl/md4.h ../include/openssl/md5.h
+s_time.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+s_time.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+s_time.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+s_time.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_time.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+s_time.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+s_time.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+s_time.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+s_time.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+s_time.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+s_time.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_time.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+s_time.o: s_apps.h
+sess_id.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+sess_id.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+sess_id.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+sess_id.o: ../include/openssl/comp.h ../include/openssl/conf.h
+sess_id.o: ../include/openssl/crypto.h ../include/openssl/des.h
+sess_id.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+sess_id.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
+sess_id.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+sess_id.o: ../include/openssl/evp.h ../include/openssl/idea.h
+sess_id.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+sess_id.o: ../include/openssl/md4.h ../include/openssl/md5.h
+sess_id.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+sess_id.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+sess_id.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+sess_id.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+sess_id.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+sess_id.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+sess_id.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+sess_id.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+sess_id.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+sess_id.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+sess_id.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+sess_id.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+smime.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+smime.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+smime.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+smime.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+smime.o: ../include/openssl/des.h ../include/openssl/dh.h
+smime.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+smime.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+smime.o: ../include/openssl/engine.h ../include/openssl/err.h
+smime.o: ../include/openssl/evp.h ../include/openssl/idea.h
+smime.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+smime.o: ../include/openssl/md4.h ../include/openssl/md5.h
+smime.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+smime.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+smime.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+smime.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+smime.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+smime.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+smime.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+smime.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+smime.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+smime.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+speed.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+speed.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+speed.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+speed.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+speed.o: ../include/openssl/des.h ../include/openssl/dh.h
+speed.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+speed.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+speed.o: ../include/openssl/engine.h ../include/openssl/err.h
+speed.o: ../include/openssl/evp.h ../include/openssl/hmac.h
+speed.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+speed.o: ../include/openssl/md2.h ../include/openssl/md4.h
+speed.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+speed.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+speed.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+speed.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+speed.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+speed.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+speed.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+speed.o: ../include/openssl/sha.h ../include/openssl/stack.h
+speed.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+speed.o: ../include/openssl/x509_vfy.h ./testdsa.h ./testrsa.h apps.h
+spkac.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+spkac.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+spkac.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+spkac.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+spkac.o: ../include/openssl/des.h ../include/openssl/dh.h
+spkac.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+spkac.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+spkac.o: ../include/openssl/engine.h ../include/openssl/err.h
+spkac.o: ../include/openssl/evp.h ../include/openssl/idea.h
+spkac.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+spkac.o: ../include/openssl/md4.h ../include/openssl/md5.h
+spkac.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+spkac.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+spkac.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+spkac.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+spkac.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+spkac.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+spkac.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+spkac.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+spkac.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+spkac.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+verify.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+verify.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+verify.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+verify.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+verify.o: ../include/openssl/des.h ../include/openssl/dh.h
+verify.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+verify.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+verify.o: ../include/openssl/engine.h ../include/openssl/err.h
+verify.o: ../include/openssl/evp.h ../include/openssl/idea.h
+verify.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+verify.o: ../include/openssl/md4.h ../include/openssl/md5.h
+verify.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+verify.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+verify.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+verify.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+verify.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+verify.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+verify.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+verify.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+verify.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+verify.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+verify.o: ../include/openssl/x509v3.h apps.h
+version.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+version.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+version.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+version.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+version.o: ../include/openssl/des.h ../include/openssl/dh.h
+version.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+version.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+version.o: ../include/openssl/evp.h ../include/openssl/idea.h
+version.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+version.o: ../include/openssl/md4.h ../include/openssl/md5.h
+version.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+version.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+version.o: ../include/openssl/opensslv.h ../include/openssl/pkcs7.h
+version.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+version.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+version.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+version.o: ../include/openssl/sha.h ../include/openssl/stack.h
+version.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+version.o: ../include/openssl/x509_vfy.h apps.h
+x509.o: ../include/openssl/asn1.h ../include/openssl/bio.h
+x509.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+x509.o: ../include/openssl/buffer.h ../include/openssl/cast.h
+x509.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+x509.o: ../include/openssl/des.h ../include/openssl/dh.h
+x509.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
+x509.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
+x509.o: ../include/openssl/engine.h ../include/openssl/err.h
+x509.o: ../include/openssl/evp.h ../include/openssl/idea.h
+x509.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+x509.o: ../include/openssl/md4.h ../include/openssl/md5.h
+x509.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+x509.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+x509.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+x509.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+x509.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+x509.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+x509.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+x509.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+x509.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+x509.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+x509.o: ../include/openssl/x509v3.h apps.h

apps/app_rand.c

@@ -124,7 +124,7 @@ int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn)
 	int consider_randfile = (file == NULL);
 	char buffer[200];
 	
-#ifdef OPENSSL_SYS_WINDOWS
+#ifdef WINDOWS
 	BIO_printf(bio_e,"Loading 'screen' into random state -");
 	BIO_flush(bio_e);
 	RAND_screen();
@@ -142,21 +142,18 @@ int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn)
 		}
 	if (file == NULL || !RAND_load_file(file, -1))
 		{
-		if (RAND_status() == 0)
+		if (RAND_status() == 0 && !dont_warn)
 			{
-			if (!dont_warn)
+			BIO_printf(bio_e,"unable to load 'random state'\n");
+			BIO_printf(bio_e,"This means that the random number generator has not been seeded\n");
+			BIO_printf(bio_e,"with much random data.\n");
+			if (consider_randfile) /* explanation does not apply when a file is explicitly named */
 				{
-				BIO_printf(bio_e,"unable to load 'random state'\n");
-				BIO_printf(bio_e,"This means that the random number generator has not been seeded\n");
-				BIO_printf(bio_e,"with much random data.\n");
-				if (consider_randfile) /* explanation does not apply when a file is explicitly named */
-					{
-					BIO_printf(bio_e,"Consider setting the RANDFILE environment variable to point at a file that\n");
-					BIO_printf(bio_e,"'random' data can be kept in (the file will be overwritten).\n");
-					}
+				BIO_printf(bio_e,"Consider setting the RANDFILE environment variable to point at a file that\n");
+				BIO_printf(bio_e,"'random' data can be kept in (the file will be overwritten).\n");
 				}
-			return 0;
 			}
+		return 0;
 		}
 	seeded = 1;
 	return 1;
@@ -180,10 +177,8 @@ long app_RAND_load_files(char *name)
 		if (*n == '\0') break;
 
 		egd=RAND_egd(n);
-		if (egd > 0)
-			tot+=egd;
-		else
-			tot+=RAND_load_file(n,-1);
+		if (egd > 0) tot+=egd;
+		tot+=RAND_load_file(n,-1);
 		if (last) break;
 		}
 	if (tot > 512)

apps/apps.h

@@ -55,74 +55,18 @@
  * copied and put under another distribution licence
  * [including the GNU Public Licence.]
  */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
 
 #ifndef HEADER_APPS_H
 #define HEADER_APPS_H
 
-#include "e_os.h"
+#include "openssl/e_os.h"
 
+#include <openssl/buffer.h>
 #include <openssl/bio.h>
+#include <openssl/crypto.h>
 #include <openssl/x509.h>
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
-#include <openssl/txt_db.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-#include <openssl/ossl_typ.h>
 
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
 int app_RAND_write_file(const char *file, BIO *bio_e);
@@ -134,9 +78,13 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
                                        * (see e_os.h).  The string is
                                        * destroyed! */
 
-#ifdef OPENSSL_SYS_WIN32
+#ifdef NO_STDIO
+BIO_METHOD *BIO_s_file();
+#endif
+
+#ifdef WIN32
 #define rename(from,to) WIN32_rename((from),(to))
-int WIN32_rename(const char *oldname,const char *newname);
+int WIN32_rename(char *oldname,char *newname);
 #endif
 
 #ifndef MONOLITH
@@ -144,28 +92,21 @@ int WIN32_rename(const char *oldname,const char *newname);
 #define MAIN(a,v)	main(a,v)
 
 #ifndef NON_MAIN
-CONF *config=NULL;
 BIO *bio_err=NULL;
-int in_FIPS_mode=0;
 #else
-extern CONF *config;
 extern BIO *bio_err;
-extern int in_FIPS_mode;
 #endif
 
 #else
 
 #define MAIN(a,v)	PROG(a,v)
-extern CONF *config;
+extern LHASH *config;
 extern char *default_config_file;
 extern BIO *bio_err;
-extern int in_FIPS_mode;
 
 #endif
 
-#ifndef OPENSSL_SYS_NETWARE
 #include <signal.h>
-#endif
 
 #ifdef SIGPIPE
 #define do_pipe_sig()	signal(SIGPIPE,SIG_IGN)
@@ -174,60 +115,20 @@ extern int in_FIPS_mode;
 #endif
 
 #if defined(MONOLITH) && !defined(OPENSSL_C)
-#  define apps_startup() \
-		do_pipe_sig()
-#  define apps_shutdown()
+#  define apps_startup()	do_pipe_sig()
 #else
-#  ifndef OPENSSL_NO_ENGINE
-#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-     defined(OPENSSL_SYS_WIN32)
-#      ifdef _O_BINARY
-#        define apps_startup() \
-			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
-#      else
-#        define apps_startup() \
-			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
-#      endif
+#  if defined(MSDOS) || defined(WIN16) || defined(WIN32)
+#    ifdef _O_BINARY
+#      define apps_startup() \
+		_fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+		SSLeay_add_all_algorithms()
 #    else
 #      define apps_startup() \
-			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
-			ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
-			setup_ui_method(); } while(0)
+		_fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+		SSLeay_add_all_algorithms()
 #    endif
-#    define apps_shutdown() \
-			do { CONF_modules_unload(1); destroy_ui_method(); \
-			EVP_cleanup(); ENGINE_cleanup(); \
-			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
-			ERR_free_strings(); } while(0)
 #  else
-#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-     defined(OPENSSL_SYS_WIN32)
-#      ifdef _O_BINARY
-#        define apps_startup() \
-			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			setup_ui_method(); } while(0)
-#      else
-#        define apps_startup() \
-			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			setup_ui_method(); } while(0)
-#      endif
-#    else
-#      define apps_startup() \
-			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
-			ERR_load_crypto_strings(); \
-			setup_ui_method(); } while(0)
-#    endif
-#    define apps_shutdown() \
-			do { CONF_modules_unload(1); destroy_ui_method(); \
-			EVP_cleanup(); \
-			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
-			ERR_free_strings(); } while(0)
+#    define apps_startup()	do_pipe_sig(); SSLeay_add_all_algorithms();
 #  endif
 #endif
 
@@ -237,19 +138,6 @@ typedef struct args_st
 	int count;
 	} ARGS;
 
-#define PW_MIN_LENGTH 4
-typedef struct pw_cb_data
-	{
-	const void *password;
-	const char *prompt_info;
-	} PW_CB_DATA;
-
-int password_callback(char *buf, int bufsiz, int verify,
-	PW_CB_DATA *cb_data);
-
-int setup_ui_method(void);
-void destroy_ui_method(void);
-
 int should_retry(int i);
 int args_from_file(char *file, int *argc, char **argv[]);
 int str2fmt(char *s);
@@ -257,72 +145,15 @@ void program_name(char *in,char *out,int size);
 int chopup_args(ARGS *arg,char *buf, int *argc, char **argv[]);
 #ifdef HEADER_X509_H
 int dump_cert_text(BIO *out, X509 *x);
-void print_name(BIO *out, const char *title, X509_NAME *nm, unsigned long lflags);
+void print_name(BIO *out, char *title, X509_NAME *nm, unsigned long lflags);
 #endif
-int set_cert_ex(unsigned long *flags, const char *arg);
 int set_name_ex(unsigned long *flags, const char *arg);
-int set_ext_copy(int *copy_type, const char *arg);
-int copy_extensions(X509 *x, X509_REQ *req, int copy_type);
 int app_passwd(BIO *err, char *arg1, char *arg2, char **pass1, char **pass2);
-int add_oid_section(BIO *err, CONF *conf);
-X509 *load_cert(BIO *err, const char *file, int format,
-	const char *pass, ENGINE *e, const char *cert_descrip);
-EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
-	const char *pass, ENGINE *e, const char *key_descrip);
-EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
-	const char *pass, ENGINE *e, const char *key_descrip);
-STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
-	const char *pass, ENGINE *e, const char *cert_descrip);
-X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
-#ifndef OPENSSL_NO_ENGINE
-ENGINE *setup_engine(BIO *err, const char *engine, int debug);
-#endif
-
-int load_config(BIO *err, CONF *cnf);
-char *make_config_name(void);
-
-/* Functions defined in ca.c and also used in ocsp.c */
-int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
-			ASN1_GENERALIZEDTIME **pinvtm, const char *str);
-
-#define DB_type         0
-#define DB_exp_date     1
-#define DB_rev_date     2
-#define DB_serial       3       /* index - unique */
-#define DB_file         4       
-#define DB_name         5       /* index - unique when active and not disabled */
-#define DB_NUMBER       6
-
-#define DB_TYPE_REV	'R'
-#define DB_TYPE_EXP	'E'
-#define DB_TYPE_VAL	'V'
-
-typedef struct db_attr_st
-	{
-	int unique_subject;
-	} DB_ATTR;
-typedef struct ca_db_st
-	{
-	DB_ATTR attributes;
-	TXT_DB *db;
-	} CA_DB;
-
-BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai);
-int save_serial(char *serialfile, char *suffix, BIGNUM *serial, ASN1_INTEGER **retai);
-int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix);
-int rand_serial(BIGNUM *b, ASN1_INTEGER *ai);
-CA_DB *load_index(char *dbfile, DB_ATTR *dbattr);
-int index_index(CA_DB *db);
-int save_index(const char *dbfile, const char *suffix, CA_DB *db);
-int rotate_index(const char *dbfile, const char *new_suffix, const char *old_suffix);
-void free_index(CA_DB *db);
-int index_name_cmp(const char **a, const char **b);
-int parse_yesno(const char *str, int def);
-
-X509_NAME *parse_name(char *str, long chtype, int multirdn);
-int args_verify(char ***pargs, int *pargc,
-			int *badarg, BIO *err, X509_VERIFY_PARAM **pm);
-void policies_print(BIO *out, X509_STORE_CTX *ctx);
+int add_oid_section(BIO *err, LHASH *conf);
+X509 *load_cert(BIO *err, char *file, int format);
+EVP_PKEY *load_key(BIO *err, char *file, int format, char *pass);
+EVP_PKEY *load_pubkey(BIO *err, char *file, int format);
+STACK_OF(X509) *load_certs(BIO *err, char *file, int format);
 
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
@@ -331,18 +162,11 @@ void policies_print(BIO *out, X509_STORE_CTX *ctx);
 #define FORMAT_NETSCAPE 4
 #define FORMAT_PKCS12   5
 #define FORMAT_SMIME    6
-#define FORMAT_ENGINE   7
-#define FORMAT_IISSGC	8	/* XXX this stupid macro helps us to avoid
-				 * adding yet another param to load_*key() */
-
-#define EXT_COPY_NONE	0
-#define EXT_COPY_ADD	1
-#define EXT_COPY_ALL	2
+/* Since this is currently inofficial, let's give it a high number */
+#define FORMAT_ENGINE   127
 
 #define NETSCAPE_CERT_HDR	"certificate"
 
 #define APP_PASS_LEN	1024
 
-#define SERIAL_RAND_BITS	64
-
 #endif

apps/asn1pars.c

@@ -82,8 +82,6 @@
 
 int MAIN(int, char **);
 
-static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf);
-
 int MAIN(int argc, char **argv)
 	{
 	int i,badops=0,offset=0,ret=1,j;
@@ -92,9 +90,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL,*b64=NULL, *derout = NULL;
 	int informat,indent=0, noout = 0, dump = 0;
 	char *infile=NULL,*str=NULL,*prog,*oidfile=NULL, *derfile=NULL;
-	char *genstr=NULL, *genconf=NULL;
 	unsigned char *tmpbuf;
-	const unsigned char *ctmpbuf;
 	BUF_MEM *buf=NULL;
 	STACK *osk=NULL;
 	ASN1_TYPE *at=NULL;
@@ -107,9 +103,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	prog=argv[0];
 	argc--;
 	argv++;
@@ -171,16 +164,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			sk_push(osk,*(++argv));
 			}
-		else if (strcmp(*argv,"-genstr") == 0)
-			{
-			if (--argc < 1) goto bad;
-			genstr= *(++argv);
-			}
-		else if (strcmp(*argv,"-genconf") == 0)
-			{
-			if (--argc < 1) goto bad;
-			genconf= *(++argv);
-			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -196,9 +179,9 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] <infile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg   input format - one of DER PEM\n");
+		BIO_printf(bio_err," -inform arg   input format - one of DER TXT PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
-		BIO_printf(bio_err," -out arg      output file (output format is always DER\n");
+		BIO_printf(bio_err," -out arg      output file\n");
 		BIO_printf(bio_err," -noout arg    don't produce any output\n");
 		BIO_printf(bio_err," -offset arg   offset into file\n");
 		BIO_printf(bio_err," -length arg   length of section in file\n");
@@ -209,8 +192,7 @@ bad:
 		BIO_printf(bio_err," -strparse offset\n");
 		BIO_printf(bio_err,"               a series of these can be used to 'dig' into multiple\n");
 		BIO_printf(bio_err,"               ASN1 blob wrappings\n");
-		BIO_printf(bio_err," -genstr str   string to generate ASN1 structure from\n");
-		BIO_printf(bio_err," -genconf file file to generate ASN1 structure from\n");
+		BIO_printf(bio_err," -out filename output DER encoding to file\n");
 		goto end;
 		}
 
@@ -224,12 +206,6 @@ bad:
 		goto end;
 		}
 	BIO_set_fp(out,stdout,BIO_NOCLOSE|BIO_FP_TEXT);
-#ifdef OPENSSL_SYS_VMS
-	{
-	BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-	out = BIO_push(tmpbio, out);
-	}
-#endif
 
 	if (oidfile != NULL)
 		{
@@ -264,39 +240,25 @@ bad:
 	if ((buf=BUF_MEM_new()) == NULL) goto end;
 	if (!BUF_MEM_grow(buf,BUFSIZ*8)) goto end; /* Pre-allocate :-) */
 
-	if (genstr || genconf)
+	if (informat == FORMAT_PEM)
 		{
-		num = do_generate(bio_err, genstr, genconf, buf);
-		if (num < 0)
-			{
-			ERR_print_errors(bio_err);
+		BIO *tmp;
+
+		if ((b64=BIO_new(BIO_f_base64())) == NULL)
 			goto end;
-			}
+		BIO_push(b64,in);
+		tmp=in;
+		in=b64;
+		b64=tmp;
 		}
 
-	else
+	num=0;
+	for (;;)
 		{
-
-		if (informat == FORMAT_PEM)
-			{
-			BIO *tmp;
-
-			if ((b64=BIO_new(BIO_f_base64())) == NULL)
-				goto end;
-			BIO_push(b64,in);
-			tmp=in;
-			in=b64;
-			b64=tmp;
-			}
-
-		num=0;
-		for (;;)
-			{
-			if (!BUF_MEM_grow(buf,(int)num+BUFSIZ)) goto end;
-			i=BIO_read(in,&(buf->data[num]),BUFSIZ);
-			if (i <= 0) break;
-			num+=i;
-			}
+		if (!BUF_MEM_grow(buf,(int)num+BUFSIZ)) goto end;
+		i=BIO_read(in,&(buf->data[num]),BUFSIZ);
+		if (i <= 0) break;
+		num+=i;
 		}
 	str=buf->data;
 
@@ -309,7 +271,6 @@ bad:
 		for (i=0; i<sk_num(osk); i++)
 			{
 			ASN1_TYPE *atmp;
-			int typ;
 			j=atoi(sk_value(osk,i));
 			if (j == 0)
 				{
@@ -319,8 +280,7 @@ bad:
 			tmpbuf+=j;
 			tmplen-=j;
 			atmp = at;
-			ctmpbuf = tmpbuf;
-			at = d2i_ASN1_TYPE(NULL,&ctmpbuf,tmplen);
+			at = d2i_ASN1_TYPE(NULL,&tmpbuf,tmplen);
 			ASN1_TYPE_free(atmp);
 			if(!at)
 				{
@@ -328,15 +288,6 @@ bad:
 				ERR_print_errors(bio_err);
 				goto end;
 				}
-			typ = ASN1_TYPE_get(at);
-			if ((typ == V_ASN1_OBJECT)
-				|| (typ == V_ASN1_NULL))
-				{
-				BIO_printf(bio_err, "Can't parse %s type\n",
-					typ == V_ASN1_NULL ? "NULL" : "OBJECT");
-				ERR_print_errors(bio_err);
-				goto end;
-				}
 			/* hmm... this is a little evil but it works */
 			tmpbuf=at->value.asn1_string->data;
 			tmplen=at->value.asn1_string->length;
@@ -345,15 +296,7 @@ bad:
 		num=tmplen;
 		}
 
-	if (offset >= num)
-		{
-		BIO_printf(bio_err, "Error: offset too large\n");
-		goto end;
-		}
-
-	num -= offset;
-
-	if ((length == 0) || ((long)length > num)) length=(unsigned int)num;
+	if (length == 0) length=(unsigned int)num;
 	if(derout) {
 		if(BIO_write(derout, str + offset, length) != (int)length) {
 			BIO_printf(bio_err, "Error writing output\n");
@@ -372,7 +315,7 @@ bad:
 end:
 	BIO_free(derout);
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free_all(out);
+	if (out != NULL) BIO_free(out);
 	if (b64 != NULL) BIO_free(b64);
 	if (ret != 0)
 		ERR_print_errors(bio_err);
@@ -380,65 +323,6 @@ end:
 	if (at != NULL) ASN1_TYPE_free(at);
 	if (osk != NULL) sk_free(osk);
 	OBJ_cleanup();
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
-static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf)
-	{
-	CONF *cnf = NULL;
-	int len;
-	long errline;
-	unsigned char *p;
-	ASN1_TYPE *atyp = NULL;
-
-	if (genconf)
-		{
-		cnf = NCONF_new(NULL);
-		if (!NCONF_load(cnf, genconf, &errline))
-			goto conferr;
-		if (!genstr)
-			genstr = NCONF_get_string(cnf, "default", "asn1");
-		if (!genstr)
-			{
-			BIO_printf(bio, "Can't find 'asn1' in '%s'\n", genconf);
-			goto err;
-			}
-		}
-
-	atyp = ASN1_generate_nconf(genstr, cnf);
-	NCONF_free(cnf);
-
-	if (!atyp)
-		return -1;
-
-	len = i2d_ASN1_TYPE(atyp, NULL);
-
-	if (len <= 0)
-		goto err;
-
-	if (!BUF_MEM_grow(buf,len))
-		goto err;
-
-	p=(unsigned char *)buf->data;
-
-	i2d_ASN1_TYPE(atyp, &p);
-
-	ASN1_TYPE_free(atyp);
-	return len;
-
-	conferr:
-
-	if (errline > 0)
-		BIO_printf(bio, "Error on line %ld of config file '%s'\n",
-							errline, genconf);
-	else
-		BIO_printf(bio, "Error loading config file '%s'\n", genconf);
-
-	err:
-	NCONF_free(cnf);
-	ASN1_TYPE_free(atyp);
-
-	return -1;
-
-	}

apps/ca-cert.srl

@@ -1 +1 @@
-07
+05

apps/ciphers.c

@@ -59,7 +59,7 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-#ifdef OPENSSL_NO_STDIO
+#ifdef NO_STDIO
 #define APPS_WIN16
 #endif
 #include "apps.h"
@@ -69,7 +69,7 @@
 #undef PROG
 #define PROG	ciphers_main
 
-static const char *ciphers_usage[]={
+static char *ciphers_usage[]={
 "usage: ciphers args\n",
 " -v          - verbose mode, a textual listing of the ciphers in SSLeay\n",
 " -ssl2       - SSL2 mode\n",
@@ -84,7 +84,7 @@ int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
 	int verbose=0;
-	const char **pp;
+	char **pp;
 	const char *p;
 	int badops=0;
 	SSL_CTX *ctx=NULL;
@@ -95,11 +95,11 @@ int MAIN(int argc, char **argv)
 	char buf[512];
 	BIO *STDout=NULL;
 
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
+#if !defined(NO_SSL2) && !defined(NO_SSL3)
 	meth=SSLv23_server_method();
-#elif !defined(OPENSSL_NO_SSL3)
+#elif !defined(NO_SSL3)
 	meth=SSLv3_server_method();
-#elif !defined(OPENSSL_NO_SSL2)
+#elif !defined(NO_SSL2)
 	meth=SSLv2_server_method();
 #endif
 
@@ -108,12 +108,6 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 	STDout=BIO_new_fp(stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-	{
-	BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-	STDout = BIO_push(tmpbio, STDout);
-	}
-#endif
 
 	argc--;
 	argv++;
@@ -121,15 +115,15 @@ int MAIN(int argc, char **argv)
 		{
 		if (strcmp(*argv,"-v") == 0)
 			verbose=1;
-#ifndef OPENSSL_NO_SSL2
+#ifndef NO_SSL2
 		else if (strcmp(*argv,"-ssl2") == 0)
 			meth=SSLv2_client_method();
 #endif
-#ifndef OPENSSL_NO_SSL3
+#ifndef NO_SSL3
 		else if (strcmp(*argv,"-ssl3") == 0)
 			meth=SSLv3_client_method();
 #endif
-#ifndef OPENSSL_NO_TLS1
+#ifndef NO_TLS1
 		else if (strcmp(*argv,"-tls1") == 0)
 			meth=TLSv1_client_method();
 #endif
@@ -150,7 +144,7 @@ int MAIN(int argc, char **argv)
 	if (badops)
 		{
 		for (pp=ciphers_usage; (*pp != NULL); pp++)
-			BIO_printf(bio_err,"%s",*pp);
+			BIO_printf(bio_err,*pp);
 		goto end;
 		}
 
@@ -187,7 +181,7 @@ int MAIN(int argc, char **argv)
 			{
 			BIO_puts(STDout,SSL_CIPHER_description(
 				sk_SSL_CIPHER_value(sk,i),
-				buf,sizeof buf));
+				buf,512));
 			}
 		}
 
@@ -201,8 +195,7 @@ err:
 end:
 	if (ctx != NULL) SSL_CTX_free(ctx);
 	if (ssl != NULL) SSL_free(ssl);
-	if (STDout != NULL) BIO_free_all(STDout);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	if (STDout != NULL) BIO_free(STDout);
+	EXIT(ret);
 	}
 

apps/crl.c

@@ -72,7 +72,7 @@
 #undef POSTFIX
 #define	POSTFIX	".rvk"
 
-static const char *crl_usage[]={
+static char *crl_usage[]={
 "usage: crl args\n",
 "\n",
 " -inform arg     - input format - default PEM (DER or PEM)\n",
@@ -81,14 +81,12 @@ static const char *crl_usage[]={
 " -in arg         - input file - default stdin\n",
 " -out arg        - output file - default stdout\n",
 " -hash           - print hash value\n",
-" -fingerprint    - print the crl fingerprint\n",
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
 " -noout          - no CRL output\n",
 " -CAfile  name   - verify CRL using certificates in file \"name\"\n",
 " -CApath  dir    - verify CRL using certificates in \"dir\"\n",
-" -nameopt arg    - various certificate name options\n",
 NULL
 };
 
@@ -99,7 +97,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	unsigned long nmflag = 0;
 	X509_CRL *x=NULL;
 	char *CAfile = NULL, *CApath = NULL;
 	int ret=1,i,num,badops=0;
@@ -108,14 +105,14 @@ int MAIN(int argc, char **argv)
 	char *infile=NULL,*outfile=NULL;
 	int hash=0,issuer=0,lastupdate=0,nextupdate=0,noout=0,text=0;
 	int fingerprint = 0;
-	const char **pp;
+	char **pp,buf[256];
 	X509_STORE *store = NULL;
 	X509_STORE_CTX ctx;
 	X509_LOOKUP *lookup = NULL;
 	X509_OBJECT xobj;
 	EVP_PKEY *pkey;
 	int do_ver = 0;
-	const EVP_MD *md_alg,*digest=EVP_sha1();
+	const EVP_MD *md_alg,*digest=EVP_md5();
 
 	apps_startup();
 
@@ -123,20 +120,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	if (bio_out == NULL)
 		if ((bio_out=BIO_new(BIO_s_file())) != NULL)
-			{
 			BIO_set_fp(bio_out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			bio_out = BIO_push(tmpbio, bio_out);
-			}
-#endif
-			}
 
 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
@@ -191,11 +177,6 @@ int MAIN(int argc, char **argv)
 			text = 1;
 		else if (strcmp(*argv,"-hash") == 0)
 			hash= ++num;
-		else if (strcmp(*argv,"-nameopt") == 0)
-			{
-			if (--argc < 1) goto bad;
-			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
-			}
 		else if (strcmp(*argv,"-issuer") == 0)
 			issuer= ++num;
 		else if (strcmp(*argv,"-lastupdate") == 0)
@@ -225,7 +206,7 @@ int MAIN(int argc, char **argv)
 		{
 bad:
 		for (pp=crl_usage; (*pp != NULL); pp++)
-			BIO_printf(bio_err,"%s",*pp);
+			BIO_printf(bio_err,*pp);
 		goto end;
 		}
 
@@ -246,11 +227,7 @@ bad:
 			X509_LOOKUP_add_dir(lookup,NULL,X509_FILETYPE_DEFAULT);
 		ERR_clear_error();
 
-		if(!X509_STORE_CTX_init(&ctx, store, NULL, NULL)) {
-			BIO_printf(bio_err,
-				"Error initialising X509 store\n");
-			goto end;
-		}
+		X509_STORE_CTX_init(&ctx, store, NULL, NULL);
 
 		i = X509_STORE_get_by_subject(&ctx, X509_LU_X509, 
 					X509_CRL_get_issuer(x), &xobj);
@@ -279,7 +256,9 @@ bad:
 			{
 			if (issuer == i)
 				{
-				print_name(bio_out, "issuer=", X509_CRL_get_issuer(x), nmflag);
+				X509_NAME_oneline(X509_CRL_get_issuer(x),
+								buf,256);
+				BIO_printf(bio_out,"issuer= %s\n",buf);
 				}
 
 			if (hash == i)
@@ -335,15 +314,7 @@ bad:
 		}
 
 	if (outfile == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -355,11 +326,7 @@ bad:
 
 	if (text) X509_CRL_print(out, x);
 
-	if (noout) 
-		{
-		ret = 0;
-		goto end;
-		}
+	if (noout) goto end;
 
 	if 	(outformat == FORMAT_ASN1)
 		i=(int)i2d_X509_CRL_bio(out,x);
@@ -373,16 +340,15 @@ bad:
 	if (!i) { BIO_printf(bio_err,"unable to write CRL\n"); goto end; }
 	ret=0;
 end:
-	BIO_free_all(out);
-	BIO_free_all(bio_out);
+	BIO_free(out);
+	BIO_free(bio_out);
 	bio_out=NULL;
 	X509_CRL_free(x);
 	if(store) {
 		X509_STORE_CTX_cleanup(&ctx);
 		X509_STORE_free(store);
 	}
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static X509_CRL *load_crl(char *infile, int format)

apps/crl2p7.c

@@ -166,8 +166,7 @@ bad:
 		BIO_printf(bio_err," -certfile arg  certificates file of chain to a trusted CA\n");
 		BIO_printf(bio_err,"                (can be used more than once)\n");
 		BIO_printf(bio_err," -nocrl         no crl to load, just certs from '-certfile'\n");
-		ret = 1;
-		goto end;
+		EXIT(1);
 		}
 
 	ERR_load_crypto_strings();
@@ -240,15 +239,7 @@ bad:
 	sk_free(certflst);
 
 	if (outfile == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -275,12 +266,11 @@ bad:
 	ret=0;
 end:
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free_all(out);
+	if (out != NULL) BIO_free(out);
 	if (p7 != NULL) PKCS7_free(p7);
 	if (crl != NULL) X509_CRL_free(crl);
 
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 /*

apps/der_chop.in

@@ -0,0 +1,305 @@
+#!/usr/local/bin/perl
+#
+# der_chop ... this is one total hack that Eric is really not proud of
+#              so don't look at it and don't ask for support
+#
+# The "documentation" for this (i.e. all the comments) are my fault --tjh
+#
+# This program takes the "raw" output of derparse/asn1parse and 
+# converts it into tokens and then runs regular expression matches
+# to try to figure out what to grab to get the things that are needed
+# and it is possible that this will do the wrong thing as it is a *hack*
+#
+# SSLeay 0.5.2+ should have direct read support for x509 (via -inform NET)
+# [I know ... promises promises :-)]
+#
+# To convert a Netscape Certificate:
+#    der_chop < ServerCert.der > cert.pem
+# To convert a Netscape Key (and encrypt it again to protect it)
+#    rsa -inform NET -in ServerKey.der -des > key.pem
+#
+# 23-Apr-96 eay    Added the extra ASN.1 string types, I still think this
+#		   is an evil hack.  If nothing else the parsing should
+#		   be relative, not absolute.
+# 19-Apr-96 tjh    hacked (with eay) into 0.5.x format
+#
+# Tim Hudson
+# tjh@cryptsoft.com
+#
+
+
+require 'getopts.pl';
+
+$debug=0;
+
+# this was the 0.4.x way of doing things ...
+$cmd="derparse";
+$x509_cmd="x509";
+$crl_cmd="crl";
+$rc4_cmd="rc4";
+$md2_cmd="md2";
+$md4_cmd="md4";
+$rsa_cmd="rsa -des -inform der ";
+
+# this was the 0.5.x way of doing things ...
+$cmd="openssl asn1parse";
+$x509_cmd="openssl x509";
+$crl_cmd="openssl crl";
+$rc4_cmd="openssl rc4";
+$md2_cmd="openssl md2";
+$md4_cmd="openssl md4";
+$rsa_cmd="openssl rsa -des -inform der ";
+
+&Getopts('vd:') || die "usage:$0 [-v] [-d num] file";
+$depth=($opt_d =~ /^\d+$/)?$opt_d:0;
+
+&init_der();
+
+if ($#ARGV != -1)
+	{
+	foreach $file (@ARGV)
+		{
+		print STDERR "doing $file\n";
+		&dofile($file);
+		}
+	}
+else
+	{
+	$file="/tmp/a$$.DER";
+	open(OUT,">$file") || die "unable to open $file:$!\n";
+	for (;;)
+		{
+		$i=sysread(STDIN,$b,1024*10);
+		last if ($i <= 0);
+		$i=syswrite(OUT,$b,$i);
+		}
+	&dofile($file);
+	unlink($file);
+	}
+	
+sub dofile
+	{
+	local($file)=@_;
+	local(@p);
+
+	$b=&load_file($file);
+	@p=&load_file_parse($file);
+
+	foreach $_ (@p)
+		{
+		($off,$d,$hl,$len)=&parse_line($_);
+		$d-=$depth;
+		next if ($d != 0);
+		next if ($len == 0);
+
+		$o=substr($b,$off,$len+$hl);
+		($str,@data)=&der_str($o);
+		print "$str\n" if ($opt_v);
+		if ($str =~ /^$crl/)
+			{
+			open(OUT,"|$crl_cmd -inform d -hash -issuer") ||
+				die "unable to run $crl_cmd:$!\n";
+			print OUT $o;
+			close(OUT);
+			}
+		elsif ($str =~ /^$x509/)
+			{
+			open(OUT,"|$x509_cmd -inform d -hash -subject -issuer")
+				|| die "unable to run $x509_cmd:$!\n";
+			print OUT $o;
+			close(OUT);
+			}
+		elsif ($str =~ /^$rsa/)
+			{
+			($type)=($data[3] =~ /OBJECT_IDENTIFIER :(.*)\s*$/);
+			next unless ($type eq "rsaEncryption");
+			($off,$d,$hl,$len)=&parse_line($data[5]);
+			$os=substr($o,$off+$hl,$len);
+			open(OUT,"|$rsa_cmd")
+				|| die "unable to run $rsa_cmd:$!\n";
+			print OUT $os;
+			close(OUT);
+			}
+		elsif ($str =~ /^0G-1D-1G/)
+			{
+			($off,$d,$hl,$len)=&parse_line($data[1]);
+			$os=substr($o,$off+$hl,$len);
+			print STDERR "<$os>\n" if $opt_v;
+			&do_certificate($o,@data)
+				if (($os eq "certificate") &&
+				    ($str =! /^0G-1D-1G-2G-3F-3E-2D/));
+			&do_private_key($o,@data)
+				if (($os eq "private-key") &&
+				    ($str =! /^0G-1D-1G-2G-3F-3E-2D/));
+			}
+		}
+	}
+
+sub der_str
+	{
+	local($str)=@_;
+	local(*OUT,*IN,@a,$t,$d,$ret);
+	local($file)="/tmp/b$$.DER";
+	local(@ret);
+
+	open(OUT,">$file");
+	print OUT $str;
+	close(OUT);
+	open(IN,"$cmd -inform 'd' -in $file |") ||
+		die "unable to run $cmd:$!\n";
+	$ret="";
+	while (<IN>)
+		{
+		chop;
+		push(@ret,$_);
+
+		print STDERR "$_\n" if ($debug);
+
+		@a=split(/\s*:\s*/);
+		($d)=($a[1] =~ /d=\s*(\d+)/);
+		$a[2] =~ s/\s+$//;
+		$t=$DER_s2i{$a[2]};
+		$ret.="$d$t-";
+		}
+	close(IN);
+	unlink($file);
+	chop $ret;
+	$ret =~ s/(-3H(-4G-5F-5[IJKMQRS])+)+/-NAME/g;
+	$ret =~ s/(-3G-4B-4L)+/-RCERT/g;
+	return($ret,@ret);
+	}
+
+sub init_der
+	{
+	$crl= "0G-1G-2G-3F-3E-2G-NAME-2L-2L-2G-RCERT-1G-2F-2E-1C";
+	$x509="0G-1G-2B-2G-3F-3E-2G-NAME-2G-3L-3L-2G-NAME-2G-3G-4F-4E-3C-1G-2F-2E-1C";
+	$rsa= "0G-1B-1G-2F-2E-1D";
+
+	%DER_i2s=(
+		# SSLeay 0.4.x has this list
+		"A","EOC",
+		"B","INTEGER",
+		"C","BIT STRING",
+		"D","OCTET STRING",
+		"E","NULL",
+		"F","OBJECT",
+		"G","SEQUENCE",
+		"H","SET",
+		"I","PRINTABLESTRING",
+		"J","T61STRING",
+		"K","IA5STRING",
+		"L","UTCTIME",
+		"M","NUMERICSTRING",
+		"N","VIDEOTEXSTRING",
+		"O","GENERALIZEDTIME",
+		"P","GRAPHICSTRING",
+		"Q","ISO64STRING",
+		"R","GENERALSTRING",
+		"S","UNIVERSALSTRING",
+
+		# SSLeay 0.5.x changed some things ... and I'm
+		# leaving in the old stuff but adding in these
+		# to handle the new as well --tjh
+		# - Well I've just taken them out and added the extra new
+		# ones :-) - eay
+		);
+
+	foreach (keys %DER_i2s)
+		{ $DER_s2i{$DER_i2s{$_}}=$_; }
+	}
+
+sub parse_line
+	{
+	local($_)=@_;
+
+	return(/\s*(\d+):d=\s*(\d+)\s+hl=\s*(\d+)\s+l=\s*(\d+|inf)\s/);
+	}
+
+#  0:d=0 hl=4 l=377 cons: univ: SEQUENCE          
+#  4:d=1 hl=2 l= 11 prim: univ: OCTET_STRING      
+# 17:d=1 hl=4 l=360 cons: univ: SEQUENCE          
+# 21:d=2 hl=2 l= 12 cons: univ: SEQUENCE          
+# 23:d=3 hl=2 l=  8 prim: univ: OBJECT_IDENTIFIER :rc4
+# 33:d=3 hl=2 l=  0 prim: univ: NULL              
+# 35:d=2 hl=4 l=342 prim: univ: OCTET_STRING
+sub do_private_key
+	{
+	local($data,@struct)=@_;
+	local($file)="/tmp/b$$.DER";
+	local($off,$d,$hl,$len,$_,$b,@p,$s);
+
+	($type)=($struct[4] =~ /OBJECT_IDENTIFIER :(.*)\s*$/);
+	if ($type eq "rc4")
+		{
+		($off,$d,$hl,$len)=&parse_line($struct[6]);
+		open(OUT,"|$rc4_cmd >$file") ||
+			die "unable to run $rc4_cmd:$!\n";
+		print OUT substr($data,$off+$hl,$len);
+		close(OUT);
+
+		$b=&load_file($file);
+		unlink($file);
+
+		($s,@p)=&der_str($b);
+		die "unknown rsa key type\n$s\n"
+			if ($s ne '0G-1B-1G-2F-2E-1D');
+		local($off,$d,$hl,$len)=&parse_line($p[5]);
+		$b=substr($b,$off+$hl,$len);
+		($s,@p)=&der_str($b);
+		open(OUT,"|$rsa_cmd") || die "unable to run $rsa_cmd:$!\n";
+		print OUT $b;
+		close(OUT);
+		}
+	else
+		{
+		print "'$type' is unknown\n";
+		exit(1);
+		}
+	}
+
+sub do_certificate
+	{
+	local($data,@struct)=@_;
+	local($file)="/tmp/b$$.DER";
+	local($off,$d,$hl,$len,$_,$b,@p,$s);
+
+	($off,$d,$hl,$len)=&parse_line($struct[2]);
+	$b=substr($data,$off,$len+$hl);
+
+	open(OUT,"|$x509_cmd -inform d") || die "unable to run $x509_cmd:$!\n";
+	print OUT $b;
+	close(OUT);
+	}
+
+sub load_file
+	{
+	local($file)=@_;
+	local(*IN,$r,$b,$i);
+
+	$r="";
+	open(IN,"<$file") || die "unable to open $file:$!\n";
+	for (;;)
+		{
+		$i=sysread(IN,$b,10240);
+		last if ($i <= 0);
+		$r.=$b;
+		}
+	close(IN);
+	return($r);
+	}
+
+sub load_file_parse
+	{
+	local($file)=@_;
+	local(*IN,$r,@ret,$_,$i,$n,$b);
+
+	open(IN,"$cmd -inform d -in $file|")
+		|| die "unable to run der_parse\n";
+	while (<IN>)
+		{
+		chop;
+		push(@ret,$_);
+		}
+	return($r,@ret);
+	}
+

apps/dgst.c

@@ -66,7 +66,7 @@
 #include <openssl/objects.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/hmac.h>
+#include <openssl/engine.h>
 
 #undef BUFSIZE
 #define BUFSIZE	1024*8
@@ -74,9 +74,8 @@
 #undef PROG
 #define PROG	dgst_main
 
-int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file,BIO *bmd,const char *hmac_key, int non_fips_allow);
+void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, char binout,
+		EVP_PKEY *key, unsigned char *sigin, unsigned int siglen);
 
 int MAIN(int, char **);
 
@@ -90,27 +89,20 @@ int MAIN(int argc, char **argv)
 	BIO *bmd=NULL;
 	BIO *out = NULL;
 	const char *name;
-#define PROG_NAME_SIZE  39
-	char pname[PROG_NAME_SIZE+1];
+#define PROG_NAME_SIZE  16
+	char pname[PROG_NAME_SIZE];
 	int separator=0;
 	int debug=0;
-	int keyform=FORMAT_PEM;
 	const char *outfile = NULL, *keyfile = NULL;
 	const char *sigfile = NULL, *randfile = NULL;
-	int out_bin = -1, want_pub = 0, do_verify = 0;
+	char out_bin = -1, want_pub = 0, do_verify = 0;
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
-	int siglen = 0;
-	unsigned int sig_flags = 0;
-	char *passargin = NULL, *passin = NULL;
-#ifndef OPENSSL_NO_ENGINE
+	unsigned int siglen = 0;
 	char *engine=NULL;
-#endif
-	char *hmac_key=NULL;
-	int non_fips_allow = 0;
 
 	apps_startup();
-ERR_load_crypto_strings();
+
 	if ((buf=(unsigned char *)OPENSSL_malloc(BUFSIZE)) == NULL)
 		{
 		BIO_printf(bio_err,"out of memory\n");
@@ -120,11 +112,8 @@ ERR_load_crypto_strings();
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	/* first check the program name */
-	program_name(argv[0],pname,sizeof pname);
+	program_name(argv[0],pname,PROG_NAME_SIZE);
 
 	md=EVP_get_digestbyname(pname);
 
@@ -150,12 +139,6 @@ ERR_load_crypto_strings();
 			if (--argc < 1) break;
 			keyfile=*(++argv);
 			}
-		else if (!strcmp(*argv,"-passin"))
-			{
-			if (--argc < 1)
-				break;
-			passargin=*++argv;
-			}
 		else if (strcmp(*argv,"-verify") == 0)
 			{
 			if (--argc < 1) break;
@@ -169,58 +152,22 @@ ERR_load_crypto_strings();
 			keyfile=*(++argv);
 			do_verify = 1;
 			}
-		else if (strcmp(*argv,"-x931") == 0)
-			sig_flags = EVP_MD_CTX_FLAG_PAD_X931;
-		else if (strcmp(*argv,"-pss_saltlen") == 0)
-			{
-			int saltlen;
-			if (--argc < 1) break;
-			saltlen=atoi(*(++argv));
-			if (saltlen == -1)
-				sig_flags = EVP_MD_CTX_FLAG_PSS_MREC;
-			else if (saltlen == -2)
-				sig_flags = EVP_MD_CTX_FLAG_PSS_MDLEN;
-			else if (saltlen < -2 || saltlen >= 0xFFFE)
-				{
-				BIO_printf(bio_err, "Invalid PSS salt length %d\n", saltlen);
-				goto end;
-				}
-			else
-				sig_flags = saltlen;
-			sig_flags <<= 16;
-			sig_flags |= EVP_MD_CTX_FLAG_PAD_PSS;
-			}
 		else if (strcmp(*argv,"-signature") == 0)
 			{
 			if (--argc < 1) break;
 			sigfile=*(++argv);
 			}
-		else if (strcmp(*argv,"-keyform") == 0)
-			{
-			if (--argc < 1) break;
-			keyform=str2fmt(*(++argv));
-			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) break;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
 		else if (strcmp(*argv,"-binary") == 0)
 			out_bin = 1;
 		else if (strcmp(*argv,"-d") == 0)
 			debug=1;
-		else if (strcmp(*argv,"-non-fips-allow") == 0)
-			non_fips_allow=1;
-		else if (!strcmp(*argv,"-hmac"))
-			{
-			if (--argc < 1)
-				break;
-			hmac_key=*++argv;
-			}
 		else if ((m=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
 			md=m;
 		else
@@ -249,48 +196,45 @@ ERR_load_crypto_strings();
 		BIO_printf(bio_err,"-sign   file    sign digest using private key in file\n");
 		BIO_printf(bio_err,"-verify file    verify a signature using public key in file\n");
 		BIO_printf(bio_err,"-prverify file  verify a signature using private key in file\n");
-		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
-#endif
 
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm (default)\n",
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
 			LN_md4,LN_md4);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
 			LN_md2,LN_md2);
-#ifndef OPENSSL_NO_SHA
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
 			LN_sha1,LN_sha1);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
 			LN_sha,LN_sha);
-#ifndef OPENSSL_NO_SHA256
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha224,LN_sha224);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha256,LN_sha256);
-#endif
-#ifndef OPENSSL_NO_SHA512
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha384,LN_sha384);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha512,LN_sha512);
-#endif
-#endif
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
 			LN_mdc2,LN_mdc2);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
 			LN_ripemd160,LN_ripemd160);
 		err=1;
 		goto end;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
@@ -298,13 +242,7 @@ ERR_load_crypto_strings();
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		/* needed for windows 3.1 */
-		BIO_set_callback_arg(in,(char *)bio_err);
-		}
-
-	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL))
-		{
-		BIO_printf(bio_err, "Error getting password\n");
-		goto end;
+		BIO_set_callback_arg(in,bio_err);
 		}
 
 	if ((in == NULL) || (bmd == NULL))
@@ -325,15 +263,7 @@ ERR_load_crypto_strings();
 		if(out_bin)
 			out = BIO_new_file(outfile, "wb");
 		else    out = BIO_new_file(outfile, "w");
-	} else {
-		out = BIO_new_fp(stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-	}
+	} else out = BIO_new_fp(stdout, BIO_NOCLOSE);
 
 	if(!out) {
 		BIO_printf(bio_err, "Error opening output file %s\n", 
@@ -342,21 +272,27 @@ ERR_load_crypto_strings();
 		goto end;
 	}
 
-	if(keyfile)
-		{
-		if (want_pub)
-			sigkey = load_pubkey(bio_err, keyfile, keyform, 0, NULL,
-				e, "key file");
-		else
-			sigkey = load_key(bio_err, keyfile, keyform, 0, passin,
-				e, "key file");
-		if (!sigkey)
-			{
-			/* load_[pub]key() has already printed an appropriate
-			   message */
+	if(keyfile) {
+		BIO *keybio;
+		keybio = BIO_new_file(keyfile, "r");
+		if(!keybio) {
+			BIO_printf(bio_err, "Error opening key file %s\n",
+								keyfile);
+			ERR_print_errors(bio_err);
 			goto end;
-			}
 		}
+		
+		if(want_pub) 
+			sigkey = PEM_read_bio_PUBKEY(keybio, NULL, NULL, NULL);
+		else sigkey = PEM_read_bio_PrivateKey(keybio, NULL, NULL, NULL);
+		BIO_free(keybio);
+		if(!sigkey) {
+			BIO_printf(bio_err, "Error reading key file %s\n",
+								keyfile);
+			ERR_print_errors(bio_err);
+			goto end;
+		}
+	}
 
 	if(sigfile && sigkey) {
 		BIO *sigbio;
@@ -371,142 +307,80 @@ ERR_load_crypto_strings();
 		}
 		siglen = BIO_read(sigbio, sigbuf, siglen);
 		BIO_free(sigbio);
-		if(siglen <= 0) {
+		if(siglen == 0) {
 			BIO_printf(bio_err, "Error reading signature file %s\n",
 								sigfile);
 			ERR_print_errors(bio_err);
 			goto end;
 		}
 	}
+		
 
-	if (non_fips_allow)
-		{
-		EVP_MD_CTX *md_ctx;
-		BIO_get_md_ctx(bmd,&md_ctx);
-		EVP_MD_CTX_set_flags(md_ctx, EVP_MD_CTX_FLAG_NON_FIPS_ALLOW);
-		}
-
-	if (sig_flags)
-		{
-		EVP_MD_CTX *md_ctx;
-		BIO_get_md_ctx(bmd,&md_ctx);
-		EVP_MD_CTX_set_flags(md_ctx, sig_flags);
-		}
 
 	/* we use md as a filter, reading from 'in' */
-	if (!BIO_set_md(bmd,md))
-		{
-		BIO_printf(bio_err, "Error setting digest %s\n", pname);
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-		
+	BIO_set_md(bmd,md);
 	inp=BIO_push(bmd,in);
 
 	if (argc == 0)
 		{
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-		err=do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf,
-			  siglen,"","(stdin)",bmd,hmac_key,non_fips_allow);
+		do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf, siglen);
 		}
 	else
 		{
 		name=OBJ_nid2sn(md->type);
 		for (i=0; i<argc; i++)
 			{
-			char *tmp,*tofree=NULL;
-			int r;
-
 			if (BIO_read_filename(in,argv[i]) <= 0)
 				{
 				perror(argv[i]);
 				err++;
 				continue;
 				}
-			if(!out_bin)
-				{
-				size_t len = strlen(name)+strlen(argv[i])+(hmac_key ? 5 : 0)+5;
-				tmp=tofree=OPENSSL_malloc(len);
-				BIO_snprintf(tmp,len,"%s%s(%s)= ",
-							 hmac_key ? "HMAC-" : "",name,argv[i]);
-				}
-			else
-				tmp="";
-			r=do_fp(out,buf,inp,separator,out_bin,sigkey,sigbuf,
-				siglen,tmp,argv[i],bmd,hmac_key,non_fips_allow);
-			if(r)
-			    err=r;
-			if(tofree)
-				OPENSSL_free(tofree);
+			if(!out_bin) BIO_printf(out, "%s(%s)= ",name,argv[i]);
+			do_fp(out, buf,inp,separator, out_bin, sigkey, 
+								sigbuf, siglen);
 			(void)BIO_reset(bmd);
 			}
 		}
 end:
 	if (buf != NULL)
 		{
-		OPENSSL_cleanse(buf,BUFSIZE);
+		memset(buf,0,BUFSIZE);
 		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
-	if (passin)
-		OPENSSL_free(passin);
-	BIO_free_all(out);
+	BIO_free(out);
 	EVP_PKEY_free(sigkey);
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
-	apps_shutdown();
-	OPENSSL_EXIT(err);
+	EXIT(err);
 	}
 
-int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file,BIO *bmd,const char *hmac_key,int non_fips_allow)
+void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, char binout,
+			EVP_PKEY *key, unsigned char *sigin, unsigned int siglen)
 	{
-	unsigned int len;
+	int len;
 	int i;
-	EVP_MD_CTX *md_ctx;
-	HMAC_CTX hmac_ctx;
 
-	if (hmac_key)
-		{
-		EVP_MD *md;
-
-		BIO_get_md(bmd,&md);
-		HMAC_CTX_init(&hmac_ctx);
-		HMAC_Init_ex(&hmac_ctx,hmac_key,strlen(hmac_key),md, NULL);
-		BIO_get_md_ctx(bmd,&md_ctx);
-		BIO_set_md_ctx(bmd,&hmac_ctx.md_ctx);
-		}
 	for (;;)
 		{
 		i=BIO_read(bp,(char *)buf,BUFSIZE);
-		if(i < 0)
-			{
-			BIO_printf(bio_err, "Read Error in %s\n",file);
-			ERR_print_errors(bio_err);
-			return 1;
-			}
-		if (i == 0) break;
+		if (i <= 0) break;
 		}
 	if(sigin)
 		{
 		EVP_MD_CTX *ctx;
 		BIO_get_md_ctx(bp, &ctx);
-		i = EVP_VerifyFinal(ctx, sigin, (unsigned int)siglen, key); 
-		if(i > 0)
-			BIO_printf(out, "Verified OK\n");
-		else if(i == 0)
-			{
-			BIO_printf(out, "Verification Failure\n");
-			return 1;
-			}
+		i = EVP_VerifyFinal(ctx, sigin, siglen, key); 
+		if(i > 0) BIO_printf(out, "Verified OK\n");
+		else if(i == 0) BIO_printf(out, "Verification Failure\n");
 		else
 			{
 			BIO_printf(bio_err, "Error Verifying Data\n");
 			ERR_print_errors(bio_err);
-			return 1;
 			}
-		return 0;
+		return;
 		}
 	if(key)
 		{
@@ -516,22 +390,16 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			{
 			BIO_printf(bio_err, "Error Signing Data\n");
 			ERR_print_errors(bio_err);
-			return 1;
+			return;
 			}
 		}
-	else if(hmac_key)
-		{
-		HMAC_Final(&hmac_ctx,buf,&len);
-		HMAC_CTX_cleanup(&hmac_ctx);
-		}
 	else
 		len=BIO_gets(bp,(char *)buf,BUFSIZE);
 
 	if(binout) BIO_write(out, buf, len);
 	else 
 		{
-		BIO_write(out,title,strlen(title));
-		for (i=0; i<(int)len; i++)
+		for (i=0; i<len; i++)
 			{
 			if (sep && (i != 0))
 				BIO_printf(out, ":");
@@ -539,10 +407,5 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			}
 		BIO_printf(out, "\n");
 		}
-	if (hmac_key)
-		{
-		BIO_set_md_ctx(bmd,md_ctx);
-		}
-	return 0;
 	}
 

apps/dh.c

@@ -57,8 +57,7 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
-#ifndef OPENSSL_NO_DH
+#ifndef NO_DH
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -70,6 +69,7 @@
 #include <openssl/dh.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	dh_main
@@ -88,17 +88,12 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine;
-#endif
+	char *infile,*outfile,*prog,*engine;
 
 	apps_startup();
 
@@ -106,12 +101,7 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
-#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -142,13 +132,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -180,17 +168,29 @@ bad:
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -211,15 +211,7 @@ bad:
 			}
 		}
 	if (outfile == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -344,9 +336,8 @@ bad:
 	ret=0;
 end:
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free_all(out);
+	if (out != NULL) BIO_free(out);
 	if (dh != NULL) DH_free(dh);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #endif

apps/dhparam.c

@@ -109,8 +109,7 @@
  *
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
-#ifndef OPENSSL_NO_DH
+#ifndef NO_DH
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -122,8 +121,9 @@
 #include <openssl/dh.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 #include <openssl/dsa.h>
 #endif
 
@@ -143,27 +143,22 @@
  * -C
  */
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dh_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 	int dsaparam=0;
 #endif
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
-	char *inrand=NULL;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine=NULL;
-#endif
+	char *inrand=NULL,*engine=NULL;
 	int num = 0, g = 0;
 
 	apps_startup();
@@ -172,9 +167,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -205,18 +197,16 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 		else if (strcmp(*argv,"-dsaparam") == 0)
 			dsaparam=1;
 #endif
@@ -248,7 +238,7 @@ bad:
 		BIO_printf(bio_err," -outform arg  output format - one of DER PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file\n");
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 		BIO_printf(bio_err," -dsaparam     read or generate DSA parameters, convert to DH\n");
 #endif
 		BIO_printf(bio_err," -check        check the DH parameters\n");
@@ -257,9 +247,7 @@ bad:
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
 		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"               the random number generator\n");
@@ -269,14 +257,28 @@ bad:
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	if (g && !num)
 		num = DEFBITS;
 
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 	if (dsaparam)
 		{
 		if (g)
@@ -295,8 +297,6 @@ bad:
 
 	if(num) {
 
-		BN_GENCB cb;
-		BN_GENCB_set(&cb, dh_cb, bio_err);
 		if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
 			{
 			BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
@@ -305,16 +305,15 @@ bad:
 			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
 				app_RAND_load_files(inrand));
 
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 		if (dsaparam)
 			{
-			DSA *dsa = DSA_new();
+			DSA *dsa;
 			
 			BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
-			if(!dsa || !DSA_generate_parameters_ex(dsa, num,
-						NULL, 0, NULL, NULL, &cb))
+			dsa = DSA_generate_parameters(num, NULL, 0, NULL, NULL, dh_cb, bio_err);
+			if (dsa == NULL)
 				{
-				if(dsa) DSA_free(dsa);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -330,12 +329,12 @@ bad:
 		else
 #endif
 			{
-			dh = DH_new();
 			BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 			BIO_printf(bio_err,"This is going to take a long time\n");
-			if(!dh || !DH_generate_parameters_ex(dh, num, g, &cb))
+			dh=DH_generate_parameters(num,g,dh_cb,bio_err);
+			
+			if (dh == NULL)
 				{
-				if(dh) DH_free(dh);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -367,7 +366,7 @@ bad:
 			goto end;
 			}
 
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 		if (dsaparam)
 			{
 			DSA *dsa;
@@ -418,15 +417,7 @@ bad:
 		goto end;
 		}
 	if (outfile == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -505,7 +496,7 @@ bad:
 		printf("\tif ((dh->p == NULL) || (dh->g == NULL))\n");
 		printf("\t\t{ DH_free(dh); return(NULL); }\n");
 		if (dh->length)
-			printf("\tdh->length = %ld;\n", dh->length);
+			printf("\tdh->length = %d;\n", dh->length);
 		printf("\treturn(dh);\n\t}\n");
 		OPENSSL_free(data);
 		}
@@ -531,14 +522,13 @@ bad:
 	ret=0;
 end:
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free_all(out);
+	if (out != NULL) BIO_free(out);
 	if (dh != NULL) DH_free(dh);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -546,12 +536,11 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
 
 #endif

apps/dsa.c

@@ -56,8 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -69,7 +68,7 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/bn.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	dsa_main
@@ -81,13 +80,6 @@
  * -des		- encrypt output if PEM format with DES in cbc mode
  * -des3	- encrypt output if PEM format
  * -idea	- encrypt output if PEM format
- * -aes128	- encrypt output if PEM format
- * -aes192	- encrypt output if PEM format
- * -aes256	- encrypt output if PEM format
- * -camellia128 - encrypt output if PEM format
- * -camellia192 - encrypt output if PEM format
- * -camellia256 - encrypt output if PEM format
- * -seed        - encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the DSA public key
  */
@@ -96,9 +88,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -106,10 +96,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
 	int pubin = 0, pubout = 0;
-	char *infile,*outfile,*prog;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine;
-#endif
+	char *infile,*outfile,*prog,*engine;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
@@ -120,12 +107,7 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
-#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -166,13 +148,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -204,24 +184,11 @@ bad:
 		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err," -out arg        output file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt PEM output with cbc idea\n");
-#endif
-#ifndef OPENSSL_NO_AES
-		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
-#endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed           encrypt PEM output with cbc seed\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");
@@ -231,9 +198,23 @@ bad:
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -279,15 +260,7 @@ bad:
 		}
 
 	if (outfile == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -335,11 +308,10 @@ bad:
 		ret=0;
 end:
 	if(in != NULL) BIO_free(in);
-	if(out != NULL) BIO_free_all(out);
+	if(out != NULL) BIO_free(out);
 	if(dsa != NULL) DSA_free(dsa);
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #endif

apps/dsaparam.c

@@ -56,14 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 #include <assert.h>
 #include <stdio.h>
 #include <stdlib.h>
@@ -76,6 +69,7 @@
 #include <openssl/dsa.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	dsaparam_main
@@ -89,44 +83,22 @@
  * -C
  * -noout
  * -genkey
- *  #ifdef GENCB_TEST
- * -timebomb n  - interrupt keygen after <n> seconds
- *  #endif
  */
 
-#ifdef GENCB_TEST
-
-static int stop_keygen_flag = 0;
-
-static void timebomb_sigalarm(int foo)
-	{
-	stop_keygen_flag = 1;
-	}
-
-#endif
-
-static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dsa_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog,*inrand=NULL;
+	char *infile,*outfile,*prog,*inrand=NULL,*engine=NULL;
 	int numbits= -1,num,genkey=0;
 	int need_rand=0;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine=NULL;
-#endif
-#ifdef GENCB_TEST
-	int timebomb=0;
-#endif
 
 	apps_startup();
 
@@ -134,9 +106,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -167,20 +136,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
-		else if(strcmp(*argv, "-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine = *(++argv);
-			}
-#endif
-#ifdef GENCB_TEST
-		else if(strcmp(*argv, "-timebomb") == 0)
-			{
-			if (--argc < 1) goto bad;
-			timebomb = atoi(*(++argv));
-			}
-#endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
 		else if (strcmp(*argv,"-C") == 0)
@@ -223,17 +178,10 @@ bad:
 		BIO_printf(bio_err," -outform arg  output format - DER or PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file\n");
-		BIO_printf(bio_err," -text         print as text\n");
+		BIO_printf(bio_err," -text         print the key in text\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
-		BIO_printf(bio_err," -genkey       generate a DSA key\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
-#ifndef OPENSSL_NO_ENGINE
-		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
-#ifdef GENCB_TEST
-		BIO_printf(bio_err," -timebomb n   interrupt keygen after <n> seconds\n");
-#endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
 		}
@@ -259,15 +207,7 @@ bad:
 			}
 		}
 	if (outfile == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -277,10 +217,6 @@ bad:
 			}
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
-
 	if (need_rand)
 		{
 		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
@@ -291,47 +227,10 @@ bad:
 
 	if (numbits > 0)
 		{
-		BN_GENCB cb;
-		BN_GENCB_set(&cb, dsa_cb, bio_err);
 		assert(need_rand);
-		dsa = DSA_new();
-		if(!dsa)
-			{
-			BIO_printf(bio_err,"Error allocating DSA object\n");
-			goto end;
-			}
 		BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
 	        BIO_printf(bio_err,"This could take some time\n");
-#ifdef GENCB_TEST
-		if(timebomb > 0)
-	{
-		struct sigaction act;
-		act.sa_handler = timebomb_sigalarm;
-		act.sa_flags = 0;
-		BIO_printf(bio_err,"(though I'll stop it if not done within %d secs)\n",
-				timebomb);
-		if(sigaction(SIGALRM, &act, NULL) != 0)
-			{
-			BIO_printf(bio_err,"Error, couldn't set SIGALRM handler\n");
-			goto end;
-			}
-		alarm(timebomb);
-	}
-#endif
-	        if(!DSA_generate_parameters_ex(dsa,num,NULL,0,NULL,NULL, &cb))
-			{
-#ifdef GENCB_TEST
-			if(stop_keygen_flag)
-				{
-				BIO_printf(bio_err,"DSA key generation time-stopped\n");
-				/* This is an asked-for behaviour! */
-				ret = 0;
-				goto end;
-				}
-#endif
-			BIO_printf(bio_err,"Error, DSA key generation failed\n");
-			goto end;
-			}
+	        dsa=DSA_generate_parameters(num,NULL,0,NULL,NULL, dsa_cb,bio_err);
 		}
 	else if	(informat == FORMAT_ASN1)
 		dsa=d2i_DSAparams_bio(in,NULL);
@@ -406,7 +305,7 @@ bad:
 		printf("\tdsa->g=BN_bin2bn(dsa%d_g,sizeof(dsa%d_g),NULL);\n",
 			bits_p,bits_p);
 		printf("\tif ((dsa->p == NULL) || (dsa->q == NULL) || (dsa->g == NULL))\n");
-		printf("\t\t{ DSA_free(dsa); return(NULL); }\n");
+		printf("\t\treturn(NULL);\n");
 		printf("\treturn(dsa);\n\t}\n");
 		}
 
@@ -450,13 +349,12 @@ bad:
 	ret=0;
 end:
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free_all(out);
+	if (out != NULL) BIO_free(out);
 	if (dsa != NULL) DSA_free(dsa);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
-static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -464,15 +362,10 @@ static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write(arg,&c,1);
+	(void)BIO_flush(arg);
 #ifdef LINT
 	p=n;
 #endif
-#ifdef GENCB_TEST
-	if(stop_keygen_flag)
-		return 0;
-#endif
-	return 1;
 	}
 #endif

apps/ec.c

@@ -1,403 +0,0 @@
-/* apps/ec.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_NO_EC
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/bio.h>
-#include <openssl/err.h>
-#include <openssl/evp.h>
-#include <openssl/pem.h>
-
-#undef PROG
-#define PROG	ec_main
-
-/* -inform arg    - input format - default PEM (one of DER, NET or PEM)
- * -outform arg   - output format - default PEM
- * -in arg        - input file - default stdin
- * -out arg       - output file - default stdout
- * -des           - encrypt output if PEM format with DES in cbc mode
- * -text          - print a text version
- * -param_out     - print the elliptic curve parameters
- * -conv_form arg - specifies the point encoding form
- * -param_enc arg - specifies the parameter encoding
- */
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-{
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE 	*e = NULL;
-#endif
-	int 	ret = 1;
-	EC_KEY 	*eckey = NULL;
-	const EC_GROUP *group;
-	int 	i, badops = 0;
-	const EVP_CIPHER *enc = NULL;
-	BIO 	*in = NULL, *out = NULL;
-	int 	informat, outformat, text=0, noout=0;
-	int  	pubin = 0, pubout = 0, param_out = 0;
-	char 	*infile, *outfile, *prog, *engine;
-	char 	*passargin = NULL, *passargout = NULL;
-	char 	*passin = NULL, *passout = NULL;
-	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED;
-	int	new_form = 0;
-	int	asn1_flag = OPENSSL_EC_NAMED_CURVE;
-	int 	new_asn1_flag = 0;
-
-	apps_startup();
-
-	if (bio_err == NULL)
-		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
-			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	engine = NULL;
-	infile = NULL;
-	outfile = NULL;
-	informat = FORMAT_PEM;
-	outformat = FORMAT_PEM;
-
-	prog = argv[0];
-	argc--;
-	argv++;
-	while (argc >= 1)
-		{
-		if (strcmp(*argv,"-inform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			informat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-outform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outformat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-in") == 0)
-			{
-			if (--argc < 1) goto bad;
-			infile= *(++argv);
-			}
-		else if (strcmp(*argv,"-out") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-passin") == 0)
-			{
-			if (--argc < 1) goto bad;
-			passargin= *(++argv);
-			}
-		else if (strcmp(*argv,"-passout") == 0)
-			{
-			if (--argc < 1) goto bad;
-			passargout= *(++argv);
-			}
-		else if (strcmp(*argv, "-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
-		else if (strcmp(*argv, "-noout") == 0)
-			noout = 1;
-		else if (strcmp(*argv, "-text") == 0)
-			text = 1;
-		else if (strcmp(*argv, "-conv_form") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_form = 1;
-			if (strcmp(*argv, "compressed") == 0)
-				form = POINT_CONVERSION_COMPRESSED;
-			else if (strcmp(*argv, "uncompressed") == 0)
-				form = POINT_CONVERSION_UNCOMPRESSED;
-			else if (strcmp(*argv, "hybrid") == 0)
-				form = POINT_CONVERSION_HYBRID;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-param_enc") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_asn1_flag = 1;
-			if (strcmp(*argv, "named_curve") == 0)
-				asn1_flag = OPENSSL_EC_NAMED_CURVE;
-			else if (strcmp(*argv, "explicit") == 0)
-				asn1_flag = 0;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-param_out") == 0)
-			param_out = 1;
-		else if (strcmp(*argv, "-pubin") == 0)
-			pubin=1;
-		else if (strcmp(*argv, "-pubout") == 0)
-			pubout=1;
-		else if ((enc=EVP_get_cipherbyname(&(argv[0][1]))) == NULL)
-			{
-			BIO_printf(bio_err, "unknown option %s\n", *argv);
-			badops=1;
-			break;
-			}
-		argc--;
-		argv++;
-		}
-
-	if (badops)
-		{
-bad:
-		BIO_printf(bio_err, "%s [options] <infile >outfile\n", prog);
-		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, " -inform arg     input format - "
-				"DER or PEM\n");
-		BIO_printf(bio_err, " -outform arg    output format - "
-				"DER or PEM\n");
-		BIO_printf(bio_err, " -in arg         input file\n");
-		BIO_printf(bio_err, " -passin arg     input file pass "
-				"phrase source\n");
-		BIO_printf(bio_err, " -out arg        output file\n");
-		BIO_printf(bio_err, " -passout arg    output file pass "
-				"phrase source\n");
-		BIO_printf(bio_err, " -engine e       use engine e, "
-				"possibly a hardware device.\n");
-		BIO_printf(bio_err, " -des            encrypt PEM output, "
-				"instead of 'des' every other \n"
-				"                 cipher "
-				"supported by OpenSSL can be used\n");
-		BIO_printf(bio_err, " -text           print the key\n");
-		BIO_printf(bio_err, " -noout          don't print key out\n");
-		BIO_printf(bio_err, " -param_out      print the elliptic "
-				"curve parameters\n");
-		BIO_printf(bio_err, " -conv_form arg  specifies the "
-				"point conversion form \n");
-		BIO_printf(bio_err, "                 possible values:"
-				" compressed\n");
-		BIO_printf(bio_err, "                                 "
-				" uncompressed (default)\n");
-		BIO_printf(bio_err, "                                  "
-				" hybrid\n");
-		BIO_printf(bio_err, " -param_enc arg  specifies the way"
-				" the ec parameters are encoded\n");
-		BIO_printf(bio_err, "                 in the asn1 der "
-				"encoding\n");
-		BIO_printf(bio_err, "                 possilbe values:"
-				" named_curve (default)\n");
-		BIO_printf(bio_err,"                                  "
-				"explicit\n");
-		goto end;
-		}
-
-	ERR_load_crypto_strings();
-
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
-
-	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) 
-		{
-		BIO_printf(bio_err, "Error getting passwords\n");
-		goto end;
-		}
-
-	in = BIO_new(BIO_s_file());
-	out = BIO_new(BIO_s_file());
-	if ((in == NULL) || (out == NULL))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (infile == NULL)
-		BIO_set_fp(in, stdin, BIO_NOCLOSE);
-	else
-		{
-		if (BIO_read_filename(in, infile) <= 0)
-			{
-			perror(infile);
-			goto end;
-			}
-		}
-
-	BIO_printf(bio_err, "read EC key\n");
-	if (informat == FORMAT_ASN1) 
-		{
-		if (pubin) 
-			eckey = d2i_EC_PUBKEY_bio(in, NULL);
-		else 
-			eckey = d2i_ECPrivateKey_bio(in, NULL);
-		} 
-	else if (informat == FORMAT_PEM) 
-		{
-		if (pubin) 
-			eckey = PEM_read_bio_EC_PUBKEY(in, NULL, NULL, 
-				NULL);
-		else 
-			eckey = PEM_read_bio_ECPrivateKey(in, NULL, NULL,
-				passin);
-		} 
-	else
-		{
-		BIO_printf(bio_err, "bad input format specified for key\n");
-		goto end;
-		}
-	if (eckey == NULL)
-		{
-		BIO_printf(bio_err,"unable to load Key\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (outfile == NULL)
-		{
-		BIO_set_fp(out, stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
-		}
-	else
-		{
-		if (BIO_write_filename(out, outfile) <= 0)
-			{
-			perror(outfile);
-			goto end;
-			}
-		}
-
-	group = EC_KEY_get0_group(eckey);
-
-	if (new_form)
-		EC_KEY_set_conv_form(eckey, form);
-
-	if (new_asn1_flag)
-		EC_KEY_set_asn1_flag(eckey, asn1_flag);
-
-	if (text) 
-		if (!EC_KEY_print(out, eckey, 0))
-			{
-			perror(outfile);
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-
-	if (noout) 
-		{
-		ret = 0;
-		goto end;
-		}
-
-	BIO_printf(bio_err, "writing EC key\n");
-	if (outformat == FORMAT_ASN1) 
-		{
-		if (param_out)
-			i = i2d_ECPKParameters_bio(out, group);
-		else if (pubin || pubout) 
-			i = i2d_EC_PUBKEY_bio(out, eckey);
-		else 
-			i = i2d_ECPrivateKey_bio(out, eckey);
-		} 
-	else if (outformat == FORMAT_PEM) 
-		{
-		if (param_out)
-			i = PEM_write_bio_ECPKParameters(out, group);
-		else if (pubin || pubout)
-			i = PEM_write_bio_EC_PUBKEY(out, eckey);
-		else 
-			i = PEM_write_bio_ECPrivateKey(out, eckey, enc,
-						NULL, 0, NULL, passout);
-		} 
-	else 
-		{
-		BIO_printf(bio_err, "bad output format specified for "
-			"outfile\n");
-		goto end;
-		}
-
-	if (!i)
-		{
-		BIO_printf(bio_err, "unable to write private key\n");
-		ERR_print_errors(bio_err);
-		}
-	else
-		ret=0;
-end:
-	if (in)
-		BIO_free(in);
-	if (out)
-		BIO_free_all(out);
-	if (eckey)
-		EC_KEY_free(eckey);
-	if (passin)
-		OPENSSL_free(passin);
-	if (passout)
-		OPENSSL_free(passout);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
-}
-#endif

apps/ecparam.c

@@ -1,728 +0,0 @@
-/* apps/ecparam.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by 
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_NO_EC
-#include <assert.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <time.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/bio.h>
-#include <openssl/err.h>
-#include <openssl/bn.h>
-#include <openssl/ec.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-
-#undef PROG
-#define PROG	ecparam_main
-
-/* -inform arg      - input format - default PEM (DER or PEM)
- * -outform arg     - output format - default PEM
- * -in  arg         - input file  - default stdin
- * -out arg         - output file - default stdout
- * -noout           - do not print the ec parameter
- * -text            - print the ec parameters in text form
- * -check           - validate the ec parameters
- * -C               - print a 'C' function creating the parameters
- * -name arg        - use the ec parameters with 'short name' name
- * -list_curves     - prints a list of all currently available curve 'short names'
- * -conv_form arg   - specifies the point conversion form 
- *                  - possible values: compressed
- *                                     uncompressed (default)
- *                                     hybrid
- * -param_enc arg   - specifies the way the ec parameters are encoded
- *                    in the asn1 der encoding
- *                    possible values: named_curve (default)
- *                                     explicit
- * -no_seed         - if 'explicit' parameters are choosen do not use the seed
- * -genkey          - generate ec key
- * -rand file       - files to use for random number input
- * -engine e        - use engine e, possibly a hardware device
- */
-
-
-static int ecparam_print_var(BIO *,BIGNUM *,const char *,int,unsigned char *);
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-	{
-	EC_GROUP *group = NULL;
-	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED; 
-	int 	new_form = 0;
-	int 	asn1_flag = OPENSSL_EC_NAMED_CURVE;
-	int 	new_asn1_flag = 0;
-	char 	*curve_name = NULL, *inrand = NULL;
-	int	list_curves = 0, no_seed = 0, check = 0,
-		badops = 0, text = 0, i, need_rand = 0, genkey = 0;
-	char	*infile = NULL, *outfile = NULL, *prog;
-	BIO 	*in = NULL, *out = NULL;
-	int 	informat, outformat, noout = 0, C = 0, ret = 1;
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE	*e = NULL;
-#endif
-	char	*engine = NULL;
-
-	BIGNUM	*ec_p = NULL, *ec_a = NULL, *ec_b = NULL,
-		*ec_gen = NULL, *ec_order = NULL, *ec_cofactor = NULL;
-	unsigned char *buffer = NULL;
-
-	apps_startup();
-
-	if (bio_err == NULL)
-		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
-			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	informat=FORMAT_PEM;
-	outformat=FORMAT_PEM;
-
-	prog=argv[0];
-	argc--;
-	argv++;
-	while (argc >= 1)
-		{
-		if 	(strcmp(*argv,"-inform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			informat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-outform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outformat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-in") == 0)
-			{
-			if (--argc < 1) goto bad;
-			infile= *(++argv);
-			}
-		else if (strcmp(*argv,"-out") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-text") == 0)
-			text = 1;
-		else if (strcmp(*argv,"-C") == 0)
-			C = 1;
-		else if (strcmp(*argv,"-check") == 0)
-			check = 1;
-		else if (strcmp (*argv, "-name") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			curve_name = *(++argv);
-			}
-		else if (strcmp(*argv, "-list_curves") == 0)
-			list_curves = 1;
-		else if (strcmp(*argv, "-conv_form") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_form = 1;
-			if (strcmp(*argv, "compressed") == 0)
-				form = POINT_CONVERSION_COMPRESSED;
-			else if (strcmp(*argv, "uncompressed") == 0)
-				form = POINT_CONVERSION_UNCOMPRESSED;
-			else if (strcmp(*argv, "hybrid") == 0)
-				form = POINT_CONVERSION_HYBRID;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-param_enc") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_asn1_flag = 1;
-			if (strcmp(*argv, "named_curve") == 0)
-				asn1_flag = OPENSSL_EC_NAMED_CURVE;
-			else if (strcmp(*argv, "explicit") == 0)
-				asn1_flag = 0;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-no_seed") == 0)
-			no_seed = 1;
-		else if (strcmp(*argv, "-noout") == 0)
-			noout=1;
-		else if (strcmp(*argv,"-genkey") == 0)
-			{
-			genkey=1;
-			need_rand=1;
-			}
-		else if (strcmp(*argv, "-rand") == 0)
-			{
-			if (--argc < 1) goto bad;
-			inrand= *(++argv);
-			need_rand=1;
-			}
-		else if(strcmp(*argv, "-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine = *(++argv);
-			}	
-		else
-			{
-			BIO_printf(bio_err,"unknown option %s\n",*argv);
-			badops=1;
-			break;
-			}
-		argc--;
-		argv++;
-		}
-
-	if (badops)
-		{
-bad:
-		BIO_printf(bio_err, "%s [options] <infile >outfile\n",prog);
-		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, " -inform arg       input format - "
-				"default PEM (DER or PEM)\n");
-		BIO_printf(bio_err, " -outform arg      output format - "
-				"default PEM\n");
-		BIO_printf(bio_err, " -in  arg          input file  - "
-				"default stdin\n");
-		BIO_printf(bio_err, " -out arg          output file - "
-				"default stdout\n");
-		BIO_printf(bio_err, " -noout            do not print the "
-				"ec parameter\n");
-		BIO_printf(bio_err, " -text             print the ec "
-				"parameters in text form\n");
-		BIO_printf(bio_err, " -check            validate the ec "
-				"parameters\n");
-		BIO_printf(bio_err, " -C                print a 'C' "
-				"function creating the parameters\n");
-		BIO_printf(bio_err, " -name arg         use the "
-				"ec parameters with 'short name' name\n");
-		BIO_printf(bio_err, " -list_curves      prints a list of "
-				"all currently available curve 'short names'\n");
-		BIO_printf(bio_err, " -conv_form arg    specifies the "
-				"point conversion form \n");
-		BIO_printf(bio_err, "                   possible values:"
-				" compressed\n");
-		BIO_printf(bio_err, "                                   "
-				" uncompressed (default)\n");
-		BIO_printf(bio_err, "                                   "
-				" hybrid\n");
-		BIO_printf(bio_err, " -param_enc arg    specifies the way"
-				" the ec parameters are encoded\n");
-		BIO_printf(bio_err, "                   in the asn1 der "
-				"encoding\n");
-		BIO_printf(bio_err, "                   possible values:"
-				" named_curve (default)\n");
-		BIO_printf(bio_err, "                                   "
-				" explicit\n");
-		BIO_printf(bio_err, " -no_seed          if 'explicit'"
-				" parameters are choosen do not"
-				" use the seed\n");
-		BIO_printf(bio_err, " -genkey           generate ec"
-				" key\n");
-		BIO_printf(bio_err, " -rand file        files to use for"
-				" random number input\n");
-		BIO_printf(bio_err, " -engine e         use engine e, "
-				"possibly a hardware device\n");
-		goto end;
-		}
-
-	ERR_load_crypto_strings();
-
-	in=BIO_new(BIO_s_file());
-	out=BIO_new(BIO_s_file());
-	if ((in == NULL) || (out == NULL))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (infile == NULL)
-		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-	else
-		{
-		if (BIO_read_filename(in,infile) <= 0)
-			{
-			perror(infile);
-			goto end;
-			}
-		}
-	if (outfile == NULL)
-		{
-		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
-	else
-		{
-		if (BIO_write_filename(out,outfile) <= 0)
-			{
-			perror(outfile);
-			goto end;
-			}
-		}
-
-#ifndef OPENSSL_NO_ENGINE
-	e = setup_engine(bio_err, engine, 0);
-#endif
-
-	if (list_curves)
-		{
-		EC_builtin_curve *curves = NULL;
-		size_t crv_len = 0;
-		size_t n = 0;
-
-		crv_len = EC_get_builtin_curves(NULL, 0);
-
-		curves = OPENSSL_malloc((int)(sizeof(EC_builtin_curve) * crv_len));
-
-		if (curves == NULL)
-			goto end;
-
-		if (!EC_get_builtin_curves(curves, crv_len))
-			{
-			OPENSSL_free(curves);
-			goto end;
-			}
-
-		
-		for (n = 0; n < crv_len; n++)
-			{
-			const char *comment;
-			const char *sname;
-			comment = curves[n].comment;
-			sname   = OBJ_nid2sn(curves[n].nid);
-			if (comment == NULL)
-				comment = "CURVE DESCRIPTION NOT AVAILABLE";
-			if (sname == NULL)
-				sname = "";
-
-			BIO_printf(out, "  %-10s: ", sname);
-			BIO_printf(out, "%s\n", comment);
-			} 
-
-		OPENSSL_free(curves);
-		ret = 0;
-		goto end;
-		}
-
-	if (curve_name != NULL)
-		{
-		int nid;
-
-		/* workaround for the SECG curve names secp192r1
-		 * and secp256r1 (which are the same as the curves
-		 * prime192v1 and prime256v1 defined in X9.62)
-		 */
-		if (!strcmp(curve_name, "secp192r1"))
-			{
-			BIO_printf(bio_err, "using curve name prime192v1 "
-				"instead of secp192r1\n");
-			nid = NID_X9_62_prime192v1;
-			}
-		else if (!strcmp(curve_name, "secp256r1"))
-			{
-			BIO_printf(bio_err, "using curve name prime256v1 "
-				"instead of secp256r1\n");
-			nid = NID_X9_62_prime256v1;
-			}
-		else
-			nid = OBJ_sn2nid(curve_name);
-	
-		if (nid == 0)
-			{
-			BIO_printf(bio_err, "unknown curve name (%s)\n", 
-				curve_name);
-			goto end;
-			}
-
-		group = EC_GROUP_new_by_curve_name(nid);
-		if (group == NULL)
-			{
-			BIO_printf(bio_err, "unable to create curve (%s)\n", 
-				curve_name);
-			goto end;
-			}
-		EC_GROUP_set_asn1_flag(group, asn1_flag);
-		EC_GROUP_set_point_conversion_form(group, form);
-		}
-	else if (informat == FORMAT_ASN1)
-		{
-		group = d2i_ECPKParameters_bio(in, NULL);
-		}
-	else if (informat == FORMAT_PEM)
-		{
-		group = PEM_read_bio_ECPKParameters(in,NULL,NULL,NULL);
-		}
-	else
-		{
-		BIO_printf(bio_err, "bad input format specified\n");
-		goto end;
-		}
-
-	if (group == NULL)
-		{
-		BIO_printf(bio_err, 
-			"unable to load elliptic curve parameters\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (new_form)
-		EC_GROUP_set_point_conversion_form(group, form);
-
-	if (new_asn1_flag)
-		EC_GROUP_set_asn1_flag(group, asn1_flag);
-
-	if (no_seed)
-		{
-		EC_GROUP_set_seed(group, NULL, 0);
-		}
-
-	if (text)
-		{
-		if (!ECPKParameters_print(out, group, 0))
-			goto end;
-		}
-
-	if (check)
-		{
-		if (group == NULL)
-			BIO_printf(bio_err, "no elliptic curve parameters\n");
-		BIO_printf(bio_err, "checking elliptic curve parameters: ");
-		if (!EC_GROUP_check(group, NULL))
-			{
-			BIO_printf(bio_err, "failed\n");
-			ERR_print_errors(bio_err);
-			}
-		else
-			BIO_printf(bio_err, "ok\n");
-			
-		}
-
-	if (C)
-		{
-		size_t	buf_len = 0, tmp_len = 0;
-		const EC_POINT *point;
-		int	is_prime, len = 0;
-		const EC_METHOD *meth = EC_GROUP_method_of(group);
-
-		if ((ec_p = BN_new()) == NULL || (ec_a = BN_new()) == NULL ||
-		    (ec_b = BN_new()) == NULL || (ec_gen = BN_new()) == NULL ||
-		    (ec_order = BN_new()) == NULL || 
-		    (ec_cofactor = BN_new()) == NULL )
-			{
-			perror("OPENSSL_malloc");
-			goto end;
-			}
-
-		is_prime = (EC_METHOD_get_field_type(meth) == 
-			NID_X9_62_prime_field);
-
-		if (is_prime)
-			{
-			if (!EC_GROUP_get_curve_GFp(group, ec_p, ec_a,
-				ec_b, NULL))
-				goto end;
-			}
-		else
-			{
-			/* TODO */
-			goto end;
-			}
-
-		if ((point = EC_GROUP_get0_generator(group)) == NULL)
-			goto end;
-		if (!EC_POINT_point2bn(group, point, 
-			EC_GROUP_get_point_conversion_form(group), ec_gen, 
-			NULL))
-			goto end;
-		if (!EC_GROUP_get_order(group, ec_order, NULL))
-			goto end;
-		if (!EC_GROUP_get_cofactor(group, ec_cofactor, NULL))
-			goto end;
-
-		if (!ec_p || !ec_a || !ec_b || !ec_gen || 
-			!ec_order || !ec_cofactor)
-			goto end;
-
-		len = BN_num_bits(ec_order);
-
-		if ((tmp_len = (size_t)BN_num_bytes(ec_p)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_a)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_b)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_gen)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_order)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_cofactor)) > buf_len)
-			buf_len = tmp_len;
-
-		buffer = (unsigned char *)OPENSSL_malloc(buf_len);
-
-		if (buffer == NULL)
-			{
-			perror("OPENSSL_malloc");
-			goto end;
-			}
-
-		ecparam_print_var(out, ec_p, "ec_p", len, buffer);
-		ecparam_print_var(out, ec_a, "ec_a", len, buffer);
-		ecparam_print_var(out, ec_b, "ec_b", len, buffer);
-		ecparam_print_var(out, ec_gen, "ec_gen", len, buffer);
-		ecparam_print_var(out, ec_order, "ec_order", len, buffer);
-		ecparam_print_var(out, ec_cofactor, "ec_cofactor", len, 
-			buffer);
-
-		BIO_printf(out, "\n\n");
-
-		BIO_printf(out, "EC_GROUP *get_ec_group_%d(void)\n\t{\n", len);
-		BIO_printf(out, "\tint ok=0;\n");
-		BIO_printf(out, "\tEC_GROUP *group = NULL;\n");
-		BIO_printf(out, "\tEC_POINT *point = NULL;\n");
-		BIO_printf(out, "\tBIGNUM   *tmp_1 = NULL, *tmp_2 = NULL, "
-				"*tmp_3 = NULL;\n\n");
-		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_p_%d, "
-				"sizeof(ec_p_%d), NULL)) == NULL)\n\t\t"
-				"goto err;\n", len, len);
-		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_a_%d, "
-				"sizeof(ec_a_%d), NULL)) == NULL)\n\t\t"
-				"goto err;\n", len, len);
-		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_b_%d, "
-				"sizeof(ec_b_%d), NULL)) == NULL)\n\t\t"
-				"goto err;\n", len, len);
-		if (is_prime)
-			{
-			BIO_printf(out, "\tif ((group = EC_GROUP_new_curve_"
-				"GFp(tmp_1, tmp_2, tmp_3, NULL)) == NULL)"
-				"\n\t\tgoto err;\n\n");
-			}
-		else
-			{
-			/* TODO */
-			goto end;
-			}
-		BIO_printf(out, "\t/* build generator */\n");
-		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_gen_%d, "
-				"sizeof(ec_gen_%d), tmp_1)) == NULL)"
-				"\n\t\tgoto err;\n", len, len);
-		BIO_printf(out, "\tpoint = EC_POINT_bn2point(group, tmp_1, "
-				"NULL, NULL);\n");
-		BIO_printf(out, "\tif (point == NULL)\n\t\tgoto err;\n");
-		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_order_%d, "
-				"sizeof(ec_order_%d), tmp_2)) == NULL)"
-				"\n\t\tgoto err;\n", len, len);
-		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_cofactor_%d, "
-				"sizeof(ec_cofactor_%d), tmp_3)) == NULL)"
-				"\n\t\tgoto err;\n", len, len);
-		BIO_printf(out, "\tif (!EC_GROUP_set_generator(group, point,"
-				" tmp_2, tmp_3))\n\t\tgoto err;\n");
-		BIO_printf(out, "\n\tok=1;\n");
-		BIO_printf(out, "err:\n");
-		BIO_printf(out, "\tif (tmp_1)\n\t\tBN_free(tmp_1);\n");
-		BIO_printf(out, "\tif (tmp_2)\n\t\tBN_free(tmp_2);\n");
-		BIO_printf(out, "\tif (tmp_3)\n\t\tBN_free(tmp_3);\n");
-		BIO_printf(out, "\tif (point)\n\t\tEC_POINT_free(point);\n");
-		BIO_printf(out, "\tif (!ok)\n");
-		BIO_printf(out, "\t\t{\n");
-		BIO_printf(out, "\t\tEC_GROUP_free(group);\n");
-		BIO_printf(out, "\t\tgroup = NULL;\n");
-		BIO_printf(out, "\t\t}\n");
-		BIO_printf(out, "\treturn(group);\n\t}\n");
-	}
-
-	if (!noout)
-		{
-		if (outformat == FORMAT_ASN1)
-			i = i2d_ECPKParameters_bio(out, group);
-		else if (outformat == FORMAT_PEM)
-			i = PEM_write_bio_ECPKParameters(out, group);
-		else	
-			{
-			BIO_printf(bio_err,"bad output format specified for"
-				" outfile\n");
-			goto end;
-			}
-		if (!i)
-			{
-			BIO_printf(bio_err, "unable to write elliptic "
-				"curve parameters\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		}
-	
-	if (need_rand)
-		{
-		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
-		if (inrand != NULL)
-			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
-				app_RAND_load_files(inrand));
-		}
-
-	if (genkey)
-		{
-		EC_KEY *eckey = EC_KEY_new();
-
-		if (eckey == NULL)
-			goto end;
-
-		assert(need_rand);
-
-		if (EC_KEY_set_group(eckey, group) == 0)
-			goto end;
-		
-		if (!EC_KEY_generate_key(eckey))
-			{
-			EC_KEY_free(eckey);
-			goto end;
-			}
-		if (outformat == FORMAT_ASN1)
-			i = i2d_ECPrivateKey_bio(out, eckey);
-		else if (outformat == FORMAT_PEM)
-			i = PEM_write_bio_ECPrivateKey(out, eckey, NULL,
-				NULL, 0, NULL, NULL);
-		else	
-			{
-			BIO_printf(bio_err, "bad output format specified "
-				"for outfile\n");
-			EC_KEY_free(eckey);
-			goto end;
-			}
-		EC_KEY_free(eckey);
-		}
-
-	if (need_rand)
-		app_RAND_write_file(NULL, bio_err);
-
-	ret=0;
-end:
-	if (ec_p)
-		BN_free(ec_p);
-	if (ec_a)
-		BN_free(ec_a);
-	if (ec_b)
-		BN_free(ec_b);
-	if (ec_gen)
-		BN_free(ec_gen);
-	if (ec_order)
-		BN_free(ec_order);
-	if (ec_cofactor)
-		BN_free(ec_cofactor);
-	if (buffer)
-		OPENSSL_free(buffer);
-	if (in != NULL)
-		BIO_free(in);
-	if (out != NULL)
-		BIO_free_all(out);
-	if (group != NULL)
-		EC_GROUP_free(group);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
-}
-
-static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
-	int len, unsigned char *buffer)
-	{
-	BIO_printf(out, "static unsigned char %s_%d[] = {", var, len);
-	if (BN_is_zero(in))
-		BIO_printf(out, "\n\t0x00");
-	else 
-		{
-		int i, l;
-
-		l = BN_bn2bin(in, buffer);
-		for (i=0; i<l-1; i++)
-			{
-			if ((i%12) == 0) 
-				BIO_printf(out, "\n\t");
-			BIO_printf(out, "0x%02X,", buffer[i]);
-			}
-		if ((i%12) == 0) 
-			BIO_printf(out, "\n\t");
-		BIO_printf(out, "0x%02X", buffer[i]);
-		}
-	BIO_printf(out, "\n\t};\n\n");
-	return 1;
-	}
-#endif

apps/enc.c

@@ -66,8 +66,11 @@
 #include <openssl/objects.h>
 #include <openssl/x509.h>
 #include <openssl/rand.h>
+#ifndef NO_MD5
+#include <openssl/md5.h>
+#endif
 #include <openssl/pem.h>
-#include <ctype.h>
+#include <openssl/engine.h>
 
 int set_hex(char *in,unsigned char *out,int size);
 #undef SIZE
@@ -78,56 +81,29 @@ int set_hex(char *in,unsigned char *out,int size);
 #define BSIZE	(8*1024)
 #define	PROG	enc_main
 
-static void show_ciphers(const OBJ_NAME *name,void *bio_)
-	{
-	BIO *bio=bio_;
-	static int n;
-
-	if(!islower((unsigned char)*name->name))
-		return;
-
-	BIO_printf(bio,"-%-25s",name->name);
-	if(++n == 3)
-		{
-		BIO_printf(bio,"\n");
-		n=0;
-		}
-	else
-		BIO_printf(bio," ");
-	}
-
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	static const char magic[]="Salted__";
-	char mbuf[sizeof magic-1];
+	char mbuf[8];	/* should be 1 smaller than magic */
 	char *strbuf=NULL;
 	unsigned char *buff=NULL,*bufsize=NULL;
 	int bsize=BSIZE,verbose=0;
 	int ret=1,inl;
-	int nopad = 0;
-	unsigned char key[EVP_MAX_KEY_LENGTH],iv[EVP_MAX_IV_LENGTH];
+	unsigned char key[24],iv[MD5_DIGEST_LENGTH];
 	unsigned char salt[PKCS5_SALT_LEN];
 	char *str=NULL, *passarg = NULL, *pass = NULL;
 	char *hkey=NULL,*hiv=NULL,*hsalt = NULL;
-	char *md=NULL;
 	int enc=1,printkey=0,i,base64=0;
 	int debug=0,olb64=0,nosalt=0;
 	const EVP_CIPHER *cipher=NULL,*c;
-	EVP_CIPHER_CTX *ctx = NULL;
 	char *inf=NULL,*outf=NULL;
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
-#define PROG_NAME_SIZE  39
-	char pname[PROG_NAME_SIZE+1];
-#ifndef OPENSSL_NO_ENGINE
+#define PROG_NAME_SIZE  16
+	char pname[PROG_NAME_SIZE];
 	char *engine = NULL;
-#endif
-	const EVP_MD *dgst=NULL;
-	int non_fips_allow = 0;
 
 	apps_startup();
 
@@ -135,11 +111,8 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	/* first check the program name */
-	program_name(argv[0],pname,sizeof pname);
+	program_name(argv[0],pname,PROG_NAME_SIZE);
 	if (strcmp(pname,"base64") == 0)
 		base64=1;
 
@@ -171,21 +144,17 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passarg= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
 			printkey=1;
 		else if	(strcmp(*argv,"-v") == 0)
 			verbose=1;
-		else if	(strcmp(*argv,"-nopad") == 0)
-			nopad=1;
 		else if	(strcmp(*argv,"-salt") == 0)
 			nosalt=0;
 		else if	(strcmp(*argv,"-nosalt") == 0)
@@ -226,7 +195,7 @@ int MAIN(int argc, char **argv)
 				goto bad;
 				}
 			buf[0]='\0';
-			fgets(buf,sizeof buf,infile);
+			fgets(buf,128,infile);
 			fclose(infile);
 			i=strlen(buf);
 			if ((i > 0) &&
@@ -257,13 +226,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			hiv= *(++argv);
 			}
-		else if (strcmp(*argv,"-md") == 0)
-			{
-			if (--argc < 1) goto bad;
-			md= *(++argv);
-			}
-		else if (strcmp(*argv,"-non-fips-allow") == 0)
-			non_fips_allow = 1;
 		else if	((argv[0][0] == '-') &&
 			((c=EVP_get_cipherbyname(&(argv[0][1]))) != NULL))
 			{
@@ -282,45 +244,101 @@ bad:
 			BIO_printf(bio_err,"%-14s encrypt\n","-e");
 			BIO_printf(bio_err,"%-14s decrypt\n","-d");
 			BIO_printf(bio_err,"%-14s base64 encode/decode, depending on encryption flag\n","-a/-base64");
-			BIO_printf(bio_err,"%-14s passphrase is the next argument\n","-k");
-			BIO_printf(bio_err,"%-14s passphrase is the first line of the file argument\n","-kfile");
-			BIO_printf(bio_err,"%-14s the next argument is the md to use to create a key\n","-md");
-			BIO_printf(bio_err,"%-14s   from a passphrase.  One of md2, md5, sha or sha1\n","");
+			BIO_printf(bio_err,"%-14s key is the next argument\n","-k");
+			BIO_printf(bio_err,"%-14s key is the first line of the file argument\n","-kfile");
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
-#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
-#endif
 
 			BIO_printf(bio_err,"Cipher Types\n");
-			OBJ_NAME_do_all_sorted(OBJ_NAME_TYPE_CIPHER_METH,
-					       show_ciphers,
-					       bio_err);
-			BIO_printf(bio_err,"\n");
+			BIO_printf(bio_err,"des     : 56 bit key DES encryption\n");
+			BIO_printf(bio_err,"des_ede :112 bit key ede DES encryption\n");
+			BIO_printf(bio_err,"des_ede3:168 bit key ede DES encryption\n");
+#ifndef NO_IDEA
+			BIO_printf(bio_err,"idea    :128 bit key IDEA encryption\n");
+#endif
+#ifndef NO_RC4
+			BIO_printf(bio_err,"rc2     :128 bit key RC2 encryption\n");
+#endif
+#ifndef NO_BF
+			BIO_printf(bio_err,"bf      :128 bit key Blowfish encryption\n");
+#endif
+#ifndef NO_RC4
+			BIO_printf(bio_err," -%-5s :128 bit key RC4 encryption\n",
+				LN_rc4);
+#endif
 
+			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
+				LN_des_ecb,LN_des_cbc,
+				LN_des_cfb64,LN_des_ofb64);
+			BIO_printf(bio_err," -%-4s (%s)\n",
+				"des", LN_des_cbc);
+
+			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
+				LN_des_ede,LN_des_ede_cbc,
+				LN_des_ede_cfb64,LN_des_ede_ofb64);
+			BIO_printf(bio_err," -desx -none\n");
+
+
+			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
+				LN_des_ede3,LN_des_ede3_cbc,
+				LN_des_ede3_cfb64,LN_des_ede3_ofb64);
+			BIO_printf(bio_err," -%-4s (%s)\n",
+				"des3", LN_des_ede3_cbc);
+
+#ifndef NO_IDEA
+			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
+				LN_idea_ecb, LN_idea_cbc,
+				LN_idea_cfb64, LN_idea_ofb64);
+			BIO_printf(bio_err," -%-4s (%s)\n","idea",LN_idea_cbc);
+#endif
+#ifndef NO_RC2
+			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
+				LN_rc2_ecb, LN_rc2_cbc,
+				LN_rc2_cfb64, LN_rc2_ofb64);
+			BIO_printf(bio_err," -%-4s (%s)\n","rc2", LN_rc2_cbc);
+#endif
+#ifndef NO_BF
+			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
+				LN_bf_ecb, LN_bf_cbc,
+				LN_bf_cfb64, LN_bf_ofb64);
+			BIO_printf(bio_err," -%-4s (%s)\n","bf", LN_bf_cbc);
+#endif
+#ifndef NO_CAST
+			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
+				LN_cast5_ecb, LN_cast5_cbc,
+				LN_cast5_cfb64, LN_cast5_ofb64);
+			BIO_printf(bio_err," -%-4s (%s)\n","cast", LN_cast5_cbc);
+#endif
+#ifndef NO_RC5
+			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
+				LN_rc5_ecb, LN_rc5_cbc,
+				LN_rc5_cfb64, LN_rc5_ofb64);
+			BIO_printf(bio_err," -%-4s (%s)\n","rc5", LN_rc5_cbc);
+#endif
 			goto end;
 			}
 		argc--;
 		argv++;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
-
-	if (md && (dgst=EVP_get_digestbyname(md)) == NULL)
+	if (engine != NULL)
 		{
-		BIO_printf(bio_err,"%s is an unsupported message digest type\n",md);
-		goto end;
-		}
-
-	if (dgst == NULL)
-		{
-		if (in_FIPS_mode)
-			dgst = EVP_sha1();
-		else
-			dgst = EVP_md5();
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
 		}
 
 	if (bufsize != NULL)
@@ -346,7 +364,7 @@ bad:
 			}
 
 		/* It must be large enough for a base64 encoded line */
-		if (base64 && n < 80) n=80;
+		if (n < 80) n=80;
 
 		bsize=(int)n;
 		if (verbose) BIO_printf(bio_err,"bufsize=%d\n",bsize);
@@ -371,16 +389,12 @@ bad:
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		BIO_set_callback(out,BIO_debug_callback);
-		BIO_set_callback_arg(in,(char *)bio_err);
-		BIO_set_callback_arg(out,(char *)bio_err);
+		BIO_set_callback_arg(in,bio_err);
+		BIO_set_callback_arg(out,bio_err);
 		}
 
 	if (inf == NULL)
-	        {
-		if (bufsize != NULL)
-			setvbuf(stdin, (char *)NULL, _IONBF, 0);
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-	        }
 	else
 		{
 		if (BIO_read_filename(in,inf) <= 0)
@@ -404,9 +418,9 @@ bad:
 			{
 			char buf[200];
 
-			BIO_snprintf(buf,sizeof buf,"enter %s %s password:",
-				     OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
-				     (enc)?"encryption":"decryption");
+			sprintf(buf,"enter %s %s password:",
+				OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
+				(enc)?"encryption":"decryption");
 			strbuf[0]='\0';
 			i=EVP_read_pw_string((char *)strbuf,SIZE,buf,enc);
 			if (i == 0)
@@ -429,17 +443,7 @@ bad:
 
 
 	if (outf == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-		if (bufsize != NULL)
-			setvbuf(stdout, (char *)NULL, _IONBF, 0);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outf) <= 0)
@@ -459,7 +463,7 @@ bad:
 		if (debug)
 			{
 			BIO_set_callback(b64,BIO_debug_callback);
-			BIO_set_callback_arg(b64,(char *)bio_err);
+			BIO_set_callback_arg(b64,bio_err);
 			}
 		if (olb64)
 			BIO_set_flags(b64,BIO_FLAGS_BASE64_NO_NL);
@@ -471,9 +475,6 @@ bad:
 
 	if (cipher != NULL)
 		{
-		/* Note that str is NULL if a key was passed on the command
-		 * line, so we get no salt in that case. Is this a bug?
-		 */
 		if (str != NULL)
 			{
 			/* Salt handling: if encrypting generate a salt and
@@ -485,12 +486,12 @@ bad:
 			else {
 				if(enc) {
 					if(hsalt) {
-						if(!set_hex(hsalt,salt,sizeof salt)) {
+						if(!set_hex(hsalt,salt,PKCS5_SALT_LEN)) {
 							BIO_printf(bio_err,
 								"invalid hex salt value\n");
 							goto end;
 						}
-					} else if (RAND_pseudo_bytes(salt, sizeof salt) < 0)
+					} else if (RAND_pseudo_bytes(salt, PKCS5_SALT_LEN) < 0)
 						goto end;
 					/* If -P option then don't bother writing */
 					if((printkey != 2)
@@ -498,14 +499,14 @@ bad:
 							 sizeof magic-1) != sizeof magic-1
 					       || BIO_write(wbio,
 							    (char *)salt,
-							    sizeof salt) != sizeof salt)) {
+							    PKCS5_SALT_LEN) != PKCS5_SALT_LEN)) {
 						BIO_printf(bio_err,"error writing output file\n");
 						goto end;
 					}
 				} else if(BIO_read(rbio,mbuf,sizeof mbuf) != sizeof mbuf
 					  || BIO_read(rbio,
 						      (unsigned char *)salt,
-				    sizeof salt) != sizeof salt) {
+				    PKCS5_SALT_LEN) != PKCS5_SALT_LEN) {
 					BIO_printf(bio_err,"error reading input file\n");
 					goto end;
 				} else if(memcmp(mbuf,magic,sizeof magic-1)) {
@@ -516,7 +517,7 @@ bad:
 				sptr = salt;
 			}
 
-			EVP_BytesToKey(cipher,dgst,sptr,
+			EVP_BytesToKey(cipher,EVP_md5(),sptr,
 				(unsigned char *)str,
 				strlen(str),1,key,iv);
 			/* zero the complete buffer or the string
@@ -524,24 +525,16 @@ bad:
 			 * bug picked up by
 			 * Larry J. Hughes Jr. <hughes@indiana.edu> */
 			if (str == strbuf)
-				OPENSSL_cleanse(str,SIZE);
+				memset(str,0,SIZE);
 			else
-				OPENSSL_cleanse(str,strlen(str));
+				memset(str,0,strlen(str));
 			}
-		if ((hiv != NULL) && !set_hex(hiv,iv,sizeof iv))
+		if ((hiv != NULL) && !set_hex(hiv,iv,8))
 			{
 			BIO_printf(bio_err,"invalid hex iv value\n");
 			goto end;
 			}
-		if ((hiv == NULL) && (str == NULL))
-			{
-			/* No IV was explicitly set and no IV was generated
-			 * during EVP_BytesToKey. Hence the IV is undefined,
-			 * making correct decryption impossible. */
-			BIO_printf(bio_err, "iv undefined\n");
-			goto end;
-			}
-		if ((hkey != NULL) && !set_hex(hkey,key,sizeof key))
+		if ((hkey != NULL) && !set_hex(hkey,key,24))
 			{
 			BIO_printf(bio_err,"invalid hex key value\n");
 			goto end;
@@ -549,40 +542,11 @@ bad:
 
 		if ((benc=BIO_new(BIO_f_cipher())) == NULL)
 			goto end;
-
-		/* Since we may be changing parameters work on the encryption
-		 * context rather than calling BIO_set_cipher().
-		 */
-
-		BIO_get_cipher_ctx(benc, &ctx);
-
-		if (non_fips_allow)
-			EVP_CIPHER_CTX_set_flags(ctx,
-				EVP_CIPH_FLAG_NON_FIPS_ALLOW);
-
-		if (!EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, enc))
-			{
-			BIO_printf(bio_err, "Error setting cipher %s\n",
-				EVP_CIPHER_name(cipher));
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-
-		if (nopad)
-			EVP_CIPHER_CTX_set_padding(ctx, 0);
-
-		if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, iv, enc))
-			{
-			BIO_printf(bio_err, "Error setting cipher %s\n",
-				EVP_CIPHER_name(cipher));
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-
+		BIO_set_cipher(benc,cipher,key,iv,enc);
 		if (debug)
 			{
 			BIO_set_callback(benc,BIO_debug_callback);
-			BIO_set_callback_arg(benc,(char *)bio_err);
+			BIO_set_callback_arg(benc,bio_err);
 			}
 
 		if (printkey)
@@ -590,7 +554,7 @@ bad:
 			if (!nosalt)
 				{
 				printf("salt=");
-				for (i=0; i<(int)sizeof(salt); i++)
+				for (i=0; i<PKCS5_SALT_LEN; i++)
 					printf("%02X",salt[i]);
 				printf("\n");
 				}
@@ -647,12 +611,11 @@ end:
 	if (strbuf != NULL) OPENSSL_free(strbuf);
 	if (buff != NULL) OPENSSL_free(buff);
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free_all(out);
+	if (out != NULL) BIO_free(out);
 	if (benc != NULL) BIO_free(benc);
 	if (b64 != NULL) BIO_free(b64);
 	if(pass) OPENSSL_free(pass);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 int set_hex(char *in, unsigned char *out, int size)

apps/engine.c

@@ -1,542 +0,0 @@
-/* apps/engine.c -*- mode: C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte <richard@levitte.org> for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef OPENSSL_NO_ENGINE
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#ifdef OPENSSL_NO_STDIO
-#define APPS_WIN16
-#endif
-#include "apps.h"
-#include <openssl/err.h>
-#include <openssl/engine.h>
-#include <openssl/ssl.h>
-
-#undef PROG
-#define PROG	engine_main
-
-static const char *engine_usage[]={
-"usage: engine opts [engine ...]\n",
-" -v[v[v[v]]] - verbose mode, for each engine, list its 'control commands'\n",
-"               -vv will additionally display each command's description\n",
-"               -vvv will also add the input flags for each command\n",
-"               -vvvv will also show internal input flags\n",
-" -c          - for each engine, also list the capabilities\n",
-" -t[t]       - for each engine, check that they are really available\n",
-"               -tt will display error trace for unavailable engines\n",
-" -pre <cmd>  - runs command 'cmd' against the ENGINE before any attempts\n",
-"               to load it (if -t is used)\n",
-" -post <cmd> - runs command 'cmd' against the ENGINE after loading it\n",
-"               (only used if -t is also provided)\n",
-" NB: -pre and -post will be applied to all ENGINEs supplied on the command\n",
-" line, or all supported ENGINEs if none are specified.\n",
-" Eg. '-pre \"SO_PATH:/lib/libdriver.so\"' calls command \"SO_PATH\" with\n",
-" argument \"/lib/libdriver.so\".\n",
-NULL
-};
-
-static void identity(void *ptr)
-	{
-	return;
-	}
-
-static int append_buf(char **buf, const char *s, int *size, int step)
-	{
-	int l = strlen(s);
-
-	if (*buf == NULL)
-		{
-		*size = step;
-		*buf = OPENSSL_malloc(*size);
-		if (*buf == NULL)
-			return 0;
-		**buf = '\0';
-		}
-
-	if (**buf != '\0')
-		l += 2;		/* ", " */
-
-	if (strlen(*buf) + strlen(s) >= (unsigned int)*size)
-		{
-		*size += step;
-		*buf = OPENSSL_realloc(*buf, *size);
-		}
-
-	if (*buf == NULL)
-		return 0;
-
-	if (**buf != '\0')
-		BUF_strlcat(*buf, ", ", *size);
-	BUF_strlcat(*buf, s, *size);
-
-	return 1;
-	}
-
-static int util_flags(BIO *bio_out, unsigned int flags, const char *indent)
-	{
-	int started = 0, err = 0;
-	/* Indent before displaying input flags */
-	BIO_printf(bio_out, "%s%s(input flags): ", indent, indent);
-	if(flags == 0)
-		{
-		BIO_printf(bio_out, "<no flags>\n");
-		return 1;
-		}
-        /* If the object is internal, mark it in a way that shows instead of
-         * having it part of all the other flags, even if it really is. */
-	if(flags & ENGINE_CMD_FLAG_INTERNAL)
-		{
-		BIO_printf(bio_out, "[Internal] ");
-		}
-
-	if(flags & ENGINE_CMD_FLAG_NUMERIC)
-		{
-		if(started)
-			{
-			BIO_printf(bio_out, "|");
-			err = 1;
-			}
-		BIO_printf(bio_out, "NUMERIC");
-		started = 1;
-		}
-	/* Now we check that no combinations of the mutually exclusive NUMERIC,
-	 * STRING, and NO_INPUT flags have been used. Future flags that can be
-	 * OR'd together with these would need to added after these to preserve
-	 * the testing logic. */
-	if(flags & ENGINE_CMD_FLAG_STRING)
-		{
-		if(started)
-			{
-			BIO_printf(bio_out, "|");
-			err = 1;
-			}
-		BIO_printf(bio_out, "STRING");
-		started = 1;
-		}
-	if(flags & ENGINE_CMD_FLAG_NO_INPUT)
-		{
-		if(started)
-			{
-			BIO_printf(bio_out, "|");
-			err = 1;
-			}
-		BIO_printf(bio_out, "NO_INPUT");
-		started = 1;
-		}
-	/* Check for unknown flags */
-	flags = flags & ~ENGINE_CMD_FLAG_NUMERIC &
-			~ENGINE_CMD_FLAG_STRING &
-			~ENGINE_CMD_FLAG_NO_INPUT &
-			~ENGINE_CMD_FLAG_INTERNAL;
-	if(flags)
-		{
-		if(started) BIO_printf(bio_out, "|");
-		BIO_printf(bio_out, "<0x%04X>", flags);
-		}
-	if(err)
-		BIO_printf(bio_out, "  <illegal flags!>");
-	BIO_printf(bio_out, "\n");
-	return 1;
-	}
-
-static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent)
-	{
-	static const int line_wrap = 78;
-	int num;
-	int ret = 0;
-	char *name = NULL;
-	char *desc = NULL;
-	int flags;
-	int xpos = 0;
-	STACK *cmds = NULL;
-	if(!ENGINE_ctrl(e, ENGINE_CTRL_HAS_CTRL_FUNCTION, 0, NULL, NULL) ||
-			((num = ENGINE_ctrl(e, ENGINE_CTRL_GET_FIRST_CMD_TYPE,
-					0, NULL, NULL)) <= 0))
-		{
-#if 0
-		BIO_printf(bio_out, "%s<no control commands>\n", indent);
-#endif
-		return 1;
-		}
-
-	cmds = sk_new_null();
-
-	if(!cmds)
-		goto err;
-	do {
-		int len;
-		/* Get the command input flags */
-		if((flags = ENGINE_ctrl(e, ENGINE_CTRL_GET_CMD_FLAGS, num,
-					NULL, NULL)) < 0)
-			goto err;
-                if (!(flags & ENGINE_CMD_FLAG_INTERNAL) || verbose >= 4)
-                        {
-                        /* Get the command name */
-                        if((len = ENGINE_ctrl(e, ENGINE_CTRL_GET_NAME_LEN_FROM_CMD, num,
-                                NULL, NULL)) <= 0)
-                                goto err;
-                        if((name = OPENSSL_malloc(len + 1)) == NULL)
-                                goto err;
-                        if(ENGINE_ctrl(e, ENGINE_CTRL_GET_NAME_FROM_CMD, num, name,
-                                NULL) <= 0)
-                                goto err;
-                        /* Get the command description */
-                        if((len = ENGINE_ctrl(e, ENGINE_CTRL_GET_DESC_LEN_FROM_CMD, num,
-                                NULL, NULL)) < 0)
-                                goto err;
-                        if(len > 0)
-                                {
-                                if((desc = OPENSSL_malloc(len + 1)) == NULL)
-                                        goto err;
-                                if(ENGINE_ctrl(e, ENGINE_CTRL_GET_DESC_FROM_CMD, num, desc,
-                                        NULL) <= 0)
-                                        goto err;
-                                }
-                        /* Now decide on the output */
-                        if(xpos == 0)
-                                /* Do an indent */
-                                xpos = BIO_printf(bio_out, indent);
-                        else
-                                /* Otherwise prepend a ", " */
-                                xpos += BIO_printf(bio_out, ", ");
-                        if(verbose == 1)
-                                {
-                                /* We're just listing names, comma-delimited */
-                                if((xpos > (int)strlen(indent)) &&
-					(xpos + (int)strlen(name) > line_wrap))
-                                        {
-                                        BIO_printf(bio_out, "\n");
-                                        xpos = BIO_printf(bio_out, indent);
-                                        }
-                                xpos += BIO_printf(bio_out, "%s", name);
-                                }
-                        else
-                                {
-                                /* We're listing names plus descriptions */
-                                BIO_printf(bio_out, "%s: %s\n", name,
-                                        (desc == NULL) ? "<no description>" : desc);
-                                /* ... and sometimes input flags */
-                                if((verbose >= 3) && !util_flags(bio_out, flags,
-                                        indent))
-                                        goto err;
-                                xpos = 0;
-                                }
-                        }
-		OPENSSL_free(name); name = NULL;
-		if(desc) { OPENSSL_free(desc); desc = NULL; }
-		/* Move to the next command */
-		num = ENGINE_ctrl(e, ENGINE_CTRL_GET_NEXT_CMD_TYPE,
-					num, NULL, NULL);
-		} while(num > 0);
-	if(xpos > 0)
-		BIO_printf(bio_out, "\n");
-	ret = 1;
-err:
-	if(cmds) sk_pop_free(cmds, identity);
-	if(name) OPENSSL_free(name);
-	if(desc) OPENSSL_free(desc);
-	return ret;
-	}
-
-static void util_do_cmds(ENGINE *e, STACK *cmds, BIO *bio_out, const char *indent)
-	{
-	int loop, res, num = sk_num(cmds);
-	if(num < 0)
-		{
-		BIO_printf(bio_out, "[Error]: internal stack error\n");
-		return;
-		}
-	for(loop = 0; loop < num; loop++)
-		{
-		char buf[256];
-		const char *cmd, *arg;
-		cmd = sk_value(cmds, loop);
-		res = 1; /* assume success */
-		/* Check if this command has no ":arg" */
-		if((arg = strstr(cmd, ":")) == NULL)
-			{
-			if(!ENGINE_ctrl_cmd_string(e, cmd, NULL, 0))
-				res = 0;
-			}
-		else
-			{
-			if((int)(arg - cmd) > 254)
-				{
-				BIO_printf(bio_out,"[Error]: command name too long\n");
-				return;
-				}
-			memcpy(buf, cmd, (int)(arg - cmd));
-			buf[arg-cmd] = '\0';
-			arg++; /* Move past the ":" */
-			/* Call the command with the argument */
-			if(!ENGINE_ctrl_cmd_string(e, buf, arg, 0))
-				res = 0;
-			}
-		if(res)
-			BIO_printf(bio_out, "[Success]: %s\n", cmd);
-		else
-			{
-			BIO_printf(bio_out, "[Failure]: %s\n", cmd);
-			ERR_print_errors(bio_out);
-			}
-		}
-	}
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-	{
-	int ret=1,i;
-	const char **pp;
-	int verbose=0, list_cap=0, test_avail=0, test_avail_noise = 0;
-	ENGINE *e;
-	STACK *engines = sk_new_null();
-	STACK *pre_cmds = sk_new_null();
-	STACK *post_cmds = sk_new_null();
-	int badops=1;
-	BIO *bio_out=NULL;
-	const char *indent = "     ";
-
-	apps_startup();
-	SSL_load_error_strings();
-
-	if (bio_err == NULL)
-		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-	bio_out=BIO_new_fp(stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-	{
-	BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-	bio_out = BIO_push(tmpbio, bio_out);
-	}
-#endif
-
-	argc--;
-	argv++;
-	while (argc >= 1)
-		{
-		if (strncmp(*argv,"-v",2) == 0)
-			{
-			if(strspn(*argv + 1, "v") < strlen(*argv + 1))
-				goto skip_arg_loop;
-			if((verbose=strlen(*argv + 1)) > 4)
-				goto skip_arg_loop;
-			}
-		else if (strcmp(*argv,"-c") == 0)
-			list_cap=1;
-		else if (strncmp(*argv,"-t",2) == 0)
-			{
-			test_avail=1;
-			if(strspn(*argv + 1, "t") < strlen(*argv + 1))
-				goto skip_arg_loop;
-			if((test_avail_noise = strlen(*argv + 1) - 1) > 1)
-				goto skip_arg_loop;
-			}
-		else if (strcmp(*argv,"-pre") == 0)
-			{
-			argc--; argv++;
-			if (argc == 0)
-				goto skip_arg_loop;
-			sk_push(pre_cmds,*argv);
-			}
-		else if (strcmp(*argv,"-post") == 0)
-			{
-			argc--; argv++;
-			if (argc == 0)
-				goto skip_arg_loop;
-			sk_push(post_cmds,*argv);
-			}
-		else if ((strncmp(*argv,"-h",2) == 0) ||
-				(strcmp(*argv,"-?") == 0))
-			goto skip_arg_loop;
-		else
-			sk_push(engines,*argv);
-		argc--;
-		argv++;
-		}
-	/* Looks like everything went OK */
-	badops = 0;
-skip_arg_loop:
-
-	if (badops)
-		{
-		for (pp=engine_usage; (*pp != NULL); pp++)
-			BIO_printf(bio_err,"%s",*pp);
-		goto end;
-		}
-
-	if (sk_num(engines) == 0)
-		{
-		for(e = ENGINE_get_first(); e != NULL; e = ENGINE_get_next(e))
-			{
-			sk_push(engines,(char *)ENGINE_get_id(e));
-			}
-		}
-
-	for (i=0; i<sk_num(engines); i++)
-		{
-		const char *id = sk_value(engines,i);
-		if ((e = ENGINE_by_id(id)) != NULL)
-			{
-			const char *name = ENGINE_get_name(e);
-			/* Do "id" first, then "name". Easier to auto-parse. */
-			BIO_printf(bio_out, "(%s) %s\n", id, name);
-			util_do_cmds(e, pre_cmds, bio_out, indent);
-			if (strcmp(ENGINE_get_id(e), id) != 0)
-				{
-				BIO_printf(bio_out, "Loaded: (%s) %s\n",
-					ENGINE_get_id(e), ENGINE_get_name(e));
-				}
-			if (list_cap)
-				{
-				int cap_size = 256;
-				char *cap_buf = NULL;
-				int k,n;
-				const int *nids;
-				ENGINE_CIPHERS_PTR fn_c;
-				ENGINE_DIGESTS_PTR fn_d;
-
-				if (ENGINE_get_RSA(e) != NULL
-					&& !append_buf(&cap_buf, "RSA",
-						&cap_size, 256))
-					goto end;
-				if (ENGINE_get_DSA(e) != NULL
-					&& !append_buf(&cap_buf, "DSA",
-						&cap_size, 256))
-					goto end;
-				if (ENGINE_get_DH(e) != NULL
-					&& !append_buf(&cap_buf, "DH",
-						&cap_size, 256))
-					goto end;
-				if (ENGINE_get_RAND(e) != NULL
-					&& !append_buf(&cap_buf, "RAND",
-						&cap_size, 256))
-					goto end;
-
-				fn_c = ENGINE_get_ciphers(e);
-				if(!fn_c) goto skip_ciphers;
-				n = fn_c(e, NULL, &nids, 0);
-				for(k=0 ; k < n ; ++k)
-					if(!append_buf(&cap_buf,
-						       OBJ_nid2sn(nids[k]),
-						       &cap_size, 256))
-						goto end;
-
-skip_ciphers:
-				fn_d = ENGINE_get_digests(e);
-				if(!fn_d) goto skip_digests;
-				n = fn_d(e, NULL, &nids, 0);
-				for(k=0 ; k < n ; ++k)
-					if(!append_buf(&cap_buf,
-						       OBJ_nid2sn(nids[k]),
-						       &cap_size, 256))
-						goto end;
-
-skip_digests:
-				if (cap_buf && (*cap_buf != '\0'))
-					BIO_printf(bio_out, " [%s]\n", cap_buf);
-
-				OPENSSL_free(cap_buf);
-				}
-			if(test_avail)
-				{
-				BIO_printf(bio_out, "%s", indent);
-				if (ENGINE_init(e))
-					{
-					BIO_printf(bio_out, "[ available ]\n");
-					util_do_cmds(e, post_cmds, bio_out, indent);
-					ENGINE_finish(e);
-					}
-				else
-					{
-					BIO_printf(bio_out, "[ unavailable ]\n");
-					if(test_avail_noise)
-						ERR_print_errors_fp(stdout);
-					ERR_clear_error();
-					}
-				}
-			if((verbose > 0) && !util_verbose(e, verbose, bio_out, indent))
-				goto end;
-			ENGINE_free(e);
-			}
-		else
-			ERR_print_errors(bio_err);
-		}
-
-	ret=0;
-end:
-
-	ERR_print_errors(bio_err);
-	sk_pop_free(engines, identity);
-	sk_pop_free(pre_cmds, identity);
-	sk_pop_free(post_cmds, identity);
-	if (bio_out != NULL) BIO_free_all(bio_out);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
-	}
-#else
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
-#endif

apps/errstr.c

@@ -91,18 +91,12 @@ int MAIN(int argc, char **argv)
 		out=BIO_new(BIO_s_file());
 		if ((out != NULL) && BIO_set_fp(out,stdout,BIO_NOCLOSE))
 			{
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
 			lh_node_stats_bio((LHASH *)ERR_get_string_table(),out);
 			lh_stats_bio((LHASH *)ERR_get_string_table(),out);
 			lh_node_usage_stats_bio((LHASH *)
 				ERR_get_string_table(),out);
 			}
-		if (out != NULL) BIO_free_all(out);
+		if (out != NULL) BIO_free(out);
 		argc--;
 		argv++;
 		}
@@ -121,6 +115,5 @@ int MAIN(int argc, char **argv)
 			ret++;
 			}
 		}
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/gendh.c

@@ -57,14 +57,7 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
-#ifndef OPENSSL_NO_DH
+#ifndef NO_DH
 #include <stdio.h>
 #include <string.h>
 #include <sys/types.h>
@@ -77,41 +70,33 @@
 #include <openssl/dh.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #define DEFBITS	512
 #undef PROG
 #define PROG gendh_main
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dh_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	BN_GENCB cb;
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
 	char *inrand=NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 	BIO *out=NULL;
 
 	apps_startup();
 
-	BN_GENCB_set(&cb, dh_cb, bio_err);
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	argv++;
 	argc--;
 	for (;;)
@@ -128,13 +113,11 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -153,18 +136,30 @@ bad:
 		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
 	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
 		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 		
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	out=BIO_new(BIO_s_file());
 	if (out == NULL)
@@ -174,15 +169,7 @@ bad:
 		}
 
 	if (outfile == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -202,10 +189,10 @@ bad:
 
 	BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 	BIO_printf(bio_err,"This is going to take a long time\n");
-
-	if(((dh = DH_new()) == NULL) || !DH_generate_parameters_ex(dh, num, g, &cb))
-		goto end;
+	dh=DH_generate_parameters(num,g,dh_cb,bio_err);
 		
+	if (dh == NULL) goto end;
+
 	app_RAND_write_file(NULL, bio_err);
 
 	if (!PEM_write_bio_DHparams(out,dh))
@@ -214,13 +201,12 @@ bad:
 end:
 	if (ret != 0)
 		ERR_print_errors(bio_err);
-	if (out != NULL) BIO_free_all(out);
+	if (out != NULL) BIO_free(out);
 	if (dh != NULL) DH_free(dh);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -228,11 +214,10 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
 #endif

apps/gendsa.c

@@ -56,8 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 #include <stdio.h>
 #include <string.h>
 #include <sys/types.h>
@@ -69,6 +68,7 @@
 #include <openssl/dsa.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #define DEFBITS	512
 #undef PROG
@@ -78,19 +78,15 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
 	char *inrand=NULL,*dsaparams=NULL;
 	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
-	const EVP_CIPHER *enc=NULL;
-#ifndef OPENSSL_NO_ENGINE
+	EVP_CIPHER *enc=NULL;
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
@@ -98,9 +94,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	argv++;
 	argc--;
 	for (;;)
@@ -116,13 +109,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -130,35 +121,15 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-") == 0)
 			goto bad;
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 		else if (strcmp(*argv,"-des") == 0)
 			enc=EVP_des_cbc();
 		else if (strcmp(*argv,"-des3") == 0)
 			enc=EVP_des_ede3_cbc();
 #endif
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
-#endif
-#ifndef OPENSSL_NO_SEED
-		else if (strcmp(*argv,"-seed") == 0)
-			enc=EVP_seed_cbc();
-#endif
-#ifndef OPENSSL_NO_AES
-		else if (strcmp(*argv,"-aes128") == 0)
-			enc=EVP_aes_128_cbc();
-		else if (strcmp(*argv,"-aes192") == 0)
-			enc=EVP_aes_192_cbc();
-		else if (strcmp(*argv,"-aes256") == 0)
-			enc=EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (strcmp(*argv,"-camellia128") == 0)
-			enc=EVP_camellia_128_cbc();
-		else if (strcmp(*argv,"-camellia192") == 0)
-			enc=EVP_camellia_192_cbc();
-		else if (strcmp(*argv,"-camellia256") == 0)
-			enc=EVP_camellia_256_cbc();
 #endif
 		else if (**argv != '-' && dsaparams == NULL)
 			{
@@ -175,28 +146,14 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"usage: gendsa [args] dsaparam-file\n");
 		BIO_printf(bio_err," -out file - output the key to 'file'\n");
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 		BIO_printf(bio_err," -des      - encrypt the generated key with DES in cbc mode\n");
 		BIO_printf(bio_err," -des3     - encrypt the generated key with DES in ede cbc mode (168 bit key)\n");
 #endif
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
 #endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
-#endif
-#ifndef OPENSSL_NO_AES
-		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
-#endif
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
@@ -205,9 +162,23 @@ bad:
 		goto end;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
 		BIO_printf(bio_err, "Error getting password\n");
@@ -234,15 +205,7 @@ bad:
 	if (out == NULL) goto end;
 
 	if (outfile == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -273,10 +236,9 @@ end:
 	if (ret != 0)
 		ERR_print_errors(bio_err);
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free_all(out);
+	if (out != NULL) BIO_free(out);
 	if (dsa != NULL) DSA_free(dsa);
 	if(passout) OPENSSL_free(passout);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #endif

apps/genrsa.c

@@ -56,14 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
-#ifndef OPENSSL_NO_RSA
+#ifndef NO_RSA
 #include <stdio.h>
 #include <string.h>
 #include <sys/types.h>
@@ -76,49 +69,36 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/rand.h>
+#include <openssl/engine.h>
 
 #define DEFBITS	512
 #undef PROG
 #define PROG genrsa_main
 
-static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK genrsa_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	BN_GENCB cb;
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	int ret=1;
+	RSA *rsa=NULL;
 	int i,num=DEFBITS;
 	long l;
-	int use_x931 = 0;
-	const EVP_CIPHER *enc=NULL;
+	EVP_CIPHER *enc=NULL;
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
 	char *passargout = NULL, *passout = NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 	char *inrand=NULL;
 	BIO *out=NULL;
-	BIGNUM *bn = BN_new();
-	RSA *rsa = RSA_new();
-
-	if(!bn || !rsa) goto err;
 
 	apps_startup();
-	BN_GENCB_set(&cb, genrsa_cb, bio_err);
 
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
-
-	if (!load_config(bio_err, NULL))
-		goto err;
 	if ((out=BIO_new(BIO_s_file())) == NULL)
 		{
 		BIO_printf(bio_err,"unable to create BIO for output\n");
@@ -139,49 +119,25 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
-		else if (strcmp(*argv,"-x931") == 0)
-			use_x931 = 1;
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
 			}
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 		else if (strcmp(*argv,"-des") == 0)
 			enc=EVP_des_cbc();
 		else if (strcmp(*argv,"-des3") == 0)
 			enc=EVP_des_ede3_cbc();
 #endif
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
-#endif
-#ifndef OPENSSL_NO_SEED
-		else if (strcmp(*argv,"-seed") == 0)
-			enc=EVP_seed_cbc();
-#endif
-#ifndef OPENSSL_NO_AES
-		else if (strcmp(*argv,"-aes128") == 0)
-			enc=EVP_aes_128_cbc();
-		else if (strcmp(*argv,"-aes192") == 0)
-			enc=EVP_aes_192_cbc();
-		else if (strcmp(*argv,"-aes256") == 0)
-			enc=EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (strcmp(*argv,"-camellia128") == 0)
-			enc=EVP_camellia_128_cbc();
-		else if (strcmp(*argv,"-camellia192") == 0)
-			enc=EVP_camellia_192_cbc();
-		else if (strcmp(*argv,"-camellia256") == 0)
-			enc=EVP_camellia_256_cbc();
 #endif
 		else if (strcmp(*argv,"-passout") == 0)
 			{
@@ -199,28 +155,14 @@ bad:
 		BIO_printf(bio_err,"usage: genrsa [args] [numbits]\n");
 		BIO_printf(bio_err," -des            encrypt the generated key with DES in cbc mode\n");
 		BIO_printf(bio_err," -des3           encrypt the generated key with DES in ede cbc mode (168 bit key)\n");
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt the generated key with IDEA in cbc mode\n");
-#endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
-#endif
-#ifndef OPENSSL_NO_AES
-		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf(bio_err," -out file       output the key to 'file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
 		BIO_printf(bio_err," -3              use 3 for the E value\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"                 the random number generator\n");
@@ -234,20 +176,26 @@ bad:
 		goto err;
 	}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto err;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto err;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	if (outfile == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -268,22 +216,12 @@ bad:
 
 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
-
-	if (use_x931)
-		{
-		BIGNUM *pubexp;
-		pubexp = BN_new();
-		if (!BN_set_word(pubexp, f4))
-			goto err;
-		if (!RSA_X931_generate_key_ex(rsa, num, pubexp, &cb))
-			goto err;
-		BN_free(pubexp);
-		}
-	else if(!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
-		goto err;
+	rsa=RSA_generate_key(num,f4,genrsa_cb,bio_err);
 		
 	app_RAND_write_file(NULL, bio_err);
 
+	if (rsa == NULL) goto err;
+	
 	/* We need to do the following for when the base number size is <
 	 * long, esp windows 3.1 :-(. */
 	l=0L;
@@ -296,28 +234,20 @@ bad:
 		l+=rsa->e->d[i];
 		}
 	BIO_printf(bio_err,"e is %ld (0x%lX)\n",l,l);
-	{
-	PW_CB_DATA cb_data;
-	cb_data.password = passout;
-	cb_data.prompt_info = outfile;
-	if (!PEM_write_bio_RSAPrivateKey(out,rsa,enc,NULL,0,
-		(pem_password_cb *)password_callback,&cb_data))
+	if (!PEM_write_bio_RSAPrivateKey(out,rsa,enc,NULL,0,NULL, passout))
 		goto err;
-	}
 
 	ret=0;
 err:
-	if (bn) BN_free(bn);
-	if (rsa) RSA_free(rsa);
-	if (out) BIO_free_all(out);
+	if (rsa != NULL) RSA_free(rsa);
+	if (out != NULL) BIO_free(out);
 	if(passout) OPENSSL_free(passout);
 	if (ret != 0)
 		ERR_print_errors(bio_err);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
-static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -325,14 +255,13 @@ static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
-#else /* !OPENSSL_NO_RSA */
+#else /* !NO_RSA */
 
 # if PEDANTIC
 static void *dummy=&dummy;

apps/makeapps.com

@@ -15,10 +15,22 @@ $!
 $!  It was written so it would try to determine what "C" compiler to
 $!  use or you can specify which "C" compiler to use.
 $!
-$!  Specify DEBUG or NODEBUG as P1 to compile with or without debugger
+$!  Specify RSAREF as P1 to compile with the RSAREF library instead of
+$!  the regular one.  If you specify NORSAREF it will compile with the
+$!  regular RSAREF routines.  (Note: If you are in the United States
+$!  you MUST compile with RSAREF unless you have a license from RSA).
+$!
+$!  Note: The RSAREF libraries are NOT INCLUDED and you have to
+$!        download it from "ftp://ftp.rsa.com/rsaref".  You have to
+$!        get the ".tar-Z" file as the ".zip" file dosen't have the
+$!        directory structure stored.  You have to extract the file
+$!        into the [.RSAREF] directory under the root directory as that
+$!        is where the scripts will look for the files.
+$!
+$!  Specify DEBUG or NODEBUG as P2 to compile with or without debugger
 $!  information.
 $!
-$!  Specify which compiler at P2 to try to compile under.
+$!  Specify which compiler at P3 to try to compile under.
 $!
 $!	   VAXC	 For VAX C.
 $!	   DECC	 For DEC C.
@@ -27,16 +39,15 @@ $!
 $!  If you don't speficy a compiler, it will try to determine which
 $!  "C" compiler to use.
 $!
-$!  P3, if defined, sets a TCP/IP library to use, through one of the following
+$!  P4, if defined, sets a TCP/IP library to use, through one of the following
 $!  keywords:
 $!
 $!	UCX		for UCX
 $!	SOCKETSHR	for SOCKETSHR+NETLIB
-$!	TCPIP		for TCPIP (post UCX)
 $!
-$!  P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
+$!  P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
 $!
-$!  P5, if defined, sets a choice of programs to compile.
+$!  P6, if defined, sets a choice of programs to compile.
 $!
 $!
 $! Define A TCP/IP Library That We Will Need To Link To.
@@ -89,6 +100,10 @@ $! Define The CRYPTO Library.
 $!
 $ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
 $!
+$! Define The RSAREF Library.
+$!
+$ RSAREF_LIB := SYS$DISK:[-.'ARCH'.EXE.RSAREF]LIBRSAGLUE.OLB
+$!
 $! Define The SSL Library.
 $!
 $ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB
@@ -139,17 +154,34 @@ $! Define The Application Files.
 $!
 $ LIB_FILES = "VERIFY;ASN1PARS;REQ;DGST;DH;DHPARAM;ENC;PASSWD;GENDH;ERRSTR;"+-
 	      "CA;PKCS7;CRL2P7;CRL;"+-
-	      "RSA;RSAUTL;DSA;DSAPARAM;EC;ECPARAM;"+-
+	      "RSA;RSAUTL;DSA;DSAPARAM;"+-
 	      "X509;GENRSA;GENDSA;S_SERVER;S_CLIENT;SPEED;"+-
 	      "S_TIME;APPS;S_CB;S_SOCKET;APP_RAND;VERSION;SESS_ID;"+-
-	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP;PRIME"
+	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND"
+$ APP_FILES := OPENSSL,'OBJ_DIR'VERIFY.OBJ,ASN1PARS.OBJ,REQ.OBJ,DGST.OBJ,DH.OBJ,DHPARAM.OBJ,ENC.OBJ,PASSWD.OBJ,GENDH.OBJ,ERRSTR.OBJ,-
+	       CA.OBJ,PKCS7.OBJ,CRL2P7.OBJ,CRL.OBJ,-
+	       RSA.OBJ,RSAUTL.OBJ,DSA.OBJ,DSAPARAM.OBJ,-
+	       X509.OBJ,GENRSA.OBJ,GENDSA.OBJ,S_SERVER.OBJ,S_CLIENT.OBJ,SPEED.OBJ,-
+	       S_TIME.OBJ,APPS.OBJ,S_CB.OBJ,S_SOCKET.OBJ,APP_RAND.OBJ,VERSION.OBJ,SESS_ID.OBJ,-
+	       CIPHERS.OBJ,NSEQ.OBJ,PKCS12.OBJ,PKCS8.OBJ,SPKAC.OBJ,SMIME.OBJ,RAND.OBJ
 $ TCPIP_PROGRAMS = ",,"
 $ IF COMPILER .EQS. "VAXC" THEN -
      TCPIP_PROGRAMS = ",OPENSSL,"
+$!$ APP_FILES := VERIFY;ASN1PARS;REQ;DGST;DH;ENC;GENDH;ERRSTR;CA;-
+$!	       PKCS7;CRL2P7;CRL;-
+$!	       RSA;DSA;DSAPARAM;-
+$!	       X509;GENRSA;GENDSA;-
+$!	       S_SERVER,'OBJ_DIR'S_SOCKET.OBJ,'OBJ_DIR'S_CB.OBJ;-
+$!	       S_CLIENT,'OBJ_DIR'S_SOCKET.OBJ,'OBJ_DIR'S_CB.OBJ;-
+$!	       SPEED;-
+$!	       S_TIME,'OBJ_DIR'S_CB.OBJ;VERSION;SESS_ID;CIPHERS;NSEQ
+$!$ TCPIP_PROGRAMS = ",,"
+$!$ IF COMPILER .EQS. "VAXC" THEN -
+$!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
-$ COMPILEWITH_CC2 = ",S_SERVER,S_CLIENT,"
+$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
 $!
 $ PHASE := LIB
 $!
@@ -260,31 +292,73 @@ $   WRITE SYS$OUTPUT FILE_NAME," needs a TCP/IP library.  Can't link.  Skipping.
 $   GOTO NEXT_FILE
 $ ENDIF
 $!
-$! Link The Program.
-$! Check To See If We Are To Link With A Specific TCP/IP Library.
+$! Link The Program, Check To See If We Need To Link With RSAREF Or Not.
 $!
-$ IF (TCPIP_LIB.NES."")
+$ IF (RSAREF.EQS."TRUE")
 $ THEN
 $!
-$! Don't Link With The RSAREF Routines And TCP/IP Library.
+$!  Check To See If We Are To Link With A Specific TCP/IP Library.
 $!
-$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'OBJECT_FILE''EXTRA_OBJ', -
-        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-        'TCPIP_LIB','OPT_FILE'/OPTION
+$   IF (TCPIP_LIB.NES."")
+$   THEN
+$!
+$!    Link With The RSAREF Library And A Specific TCP/IP Library.
+$!
+$     LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	  'OBJECT_FILE''EXTRA_OBJ', -
+          'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
+          'TCPIP_LIB','OPT_FILE'/OPTION
+$!
+$!  Else...
+$!
+$   ELSE
+$!
+$!    Link With The RSAREF Library And NO TCP/IP Library.
+$!
+$     LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	  'OBJECT_FILE''EXTRA_OBJ', -
+          'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
+          'OPT_FILE'/OPTION
+$!
+$!  End The TCP/IP Library Check.
+$!
+$   ENDIF
 $!
 $! Else...
 $!
 $ ELSE
 $!
-$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
+$!  Don't Link With The RSAREF Routines.
 $!
-$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'OBJECT_FILE''EXTRA_OBJ', -
-        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-        'OPT_FILE'/OPTION
 $!
-$! End The TCP/IP Library Check.
+$!  Check To See If We Are To Link With A Specific TCP/IP Library.
+$!
+$   IF (TCPIP_LIB.NES."")
+$   THEN
+$!
+$!    Don't Link With The RSAREF Routines And TCP/IP Library.
+$!
+$       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	    'OBJECT_FILE''EXTRA_OBJ', -
+            'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
+            'TCPIP_LIB','OPT_FILE'/OPTION
+$!
+$!  Else...
+$!
+$   ELSE
+$!
+$!    Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
+$!
+$       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	    'OBJECT_FILE''EXTRA_OBJ', -
+            'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
+            'OPT_FILE'/OPTION
+$!
+$!  End The TCP/IP Library Check.
+$!
+$   ENDIF
+$!
+$! End The RSAREF Link Check.
 $!
 $ ENDIF
 $!
@@ -451,6 +525,32 @@ $! End The Crypto Library Check.
 $!
 $ ENDIF
 $!
+$! See If We Need The RSAREF Library.
+$!
+$ IF (RSAREF.EQS."TRUE")
+$ THEN
+$!
+$!  Look For The Library LIBRSAGLUE.OLB.
+$!
+$   IF (F$SEARCH(RSAREF_LIB).EQS."")
+$   THEN
+$!
+$!    Tell The User We Can't Find The LIBRSAGLUE.OLB Library.
+$!
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "Can't Find The Library ",RSAREF_LIB,"."
+$     WRITE SYS$OUTPUT "We Can't Link Without It."
+$     WRITE SYS$OUTPUT ""
+$!
+$!    Since We Can't Link Without It, Exit.
+$!
+$     EXIT
+$   ENDIF
+$!
+$! End The RSAREF Library Check.
+$!
+$ ENDIF
+$!
 $! Look For The Library LIBSSL.OLB.
 $!
 $ IF (F$SEARCH(SSL_LIB).EQS."")
@@ -481,10 +581,86 @@ $ CHECK_OPTIONS:
 $!
 $! Check To See If P1 Is Blank.
 $!
-$ IF (P1.EQS."NODEBUG")
+$ IF (P1.EQS."NORSAREF")
 $ THEN
 $!
-$!   P1 Is NODEBUG, So Compile Without Debugger Information.
+$!   P1 Is NORSAREF, So Compile With The Regular RSA Libraries.
+$!
+$    RSAREF = "FALSE"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$!  Check To See If We Are To Use The RSAREF Library.
+$!
+$   IF (P1.EQS."RSAREF")
+$   THEN
+$!
+$!    Check To Make Sure We Have The RSAREF Source Code Directory.
+$!
+$     IF (F$SEARCH("SYS$DISK:[-.RSAREF]SOURCE.DIR").EQS."")
+$     THEN
+$!
+$!      We Don't Have The RSAREF Souce Code Directory, So Tell The
+$!      User This.
+$!
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "It appears that you don't have the RSAREF Souce Code."
+$       WRITE SYS$OUTPUT "You need to go to 'ftp://ftp.rsa.com/rsaref'.  You have to"
+$       WRITE SYS$OUTPUT "get the '.tar-Z' file as the '.zip' file dosen't have the"
+$       WRITE SYS$OUTPUT "directory structure stored.  You have to extract the file"
+$       WRITE SYS$OUTPUT "into the [.RSAREF] directory under the root directory"
+$       WRITE SYS$OUTPUT "as that is where the scripts will look for the files."
+$       WRITE SYS$OUTPUT ""
+$!
+$!      Time To Exit.
+$!
+$       EXIT
+$!
+$!    Else...
+$!
+$     ELSE
+$!
+$!      Compile Using The RSAREF Library.
+$!
+$       RSAREF = "TRUE"
+$!
+$!    End The RSAREF Soure Directory Check.
+$!
+$     ENDIF
+$!
+$!  Else...
+$!
+$   ELSE 
+$!
+$!    They Entered An Invalid Option..
+$!
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "     RSAREF   :  Compile With The RSAREF Library."
+$     WRITE SYS$OUTPUT "     NORSAREF :  Compile With The Regular RSA Library."
+$     WRITE SYS$OUTPUT ""
+$!
+$!    Time To EXIT.
+$!
+$     EXIT
+$!
+$!  End The Valid Arguement Check.
+$!
+$   ENDIF
+$!
+$! End P1 Check.
+$!
+$ ENDIF
+$!
+$! Check To See If P2 Is Blank.
+$!
+$ IF (P2.EQS."NODEBUG")
+$ THEN
+$!
+$!   P2 Is NODEBUG, So Compile Without Debugger Information.
 $!
 $    DEBUGGER  = "NODEBUG"
 $    TRACEBACK = "NOTRACEBACK" 
@@ -499,7 +675,7 @@ $ ELSE
 $!
 $!  Check To See If We Are To Compile With Debugger Information.
 $!
-$   IF (P1.EQS."DEBUG")
+$   IF (P2.EQS."DEBUG")
 $   THEN
 $!
 $!    Compile With Debugger Information.
@@ -515,7 +691,7 @@ $!
 $!    Tell The User Entered An Invalid Option..
 $!
 $     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
+$     WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "    DEBUG    :  Compile With The Debugger Information."
 $     WRITE SYS$OUTPUT "    NODEBUG  :  Compile Without The Debugger Information."
@@ -529,13 +705,13 @@ $!  End The Valid Arguement Check.
 $!
 $   ENDIF
 $!
-$! End The P1 Check.
+$! End The P2 Check.
 $!
 $ ENDIF
 $!
-$! Check To See If P2 Is Blank.
+$! Check To See If P3 Is Blank.
 $!
-$ IF (P2.EQS."")
+$ IF (P3.EQS."")
 $ THEN
 $!
 $!  O.K., The User Didn't Specify A Compiler, Let's Try To
@@ -548,7 +724,7 @@ $   THEN
 $!
 $!    Looks Like GNUC, Set To Use GNUC.
 $!
-$     P2 = "GNUC"
+$     P3 = "GNUC"
 $!
 $!  Else...
 $!
@@ -561,7 +737,7 @@ $     THEN
 $!
 $!      Looks Like DECC, Set To Use DECC.
 $!
-$       P2 = "DECC"
+$       P3 = "DECC"
 $!
 $!    Else...
 $!
@@ -569,7 +745,7 @@ $     ELSE
 $!
 $!      Looks Like VAXC, Set To Use VAXC.
 $!
-$       P2 = "VAXC"
+$       P3 = "VAXC"
 $!
 $!    End The VAXC Compiler Check.
 $!
@@ -583,9 +759,9 @@ $!  End The Compiler Check.
 $!
 $ ENDIF
 $!
-$! Check To See If We Have A Option For P3.
+$! Check To See If We Have A Option For P4.
 $!
-$ IF (P3.EQS."")
+$ IF (P4.EQS."")
 $ THEN
 $!
 $!  Find out what socket library we have available
@@ -595,7 +771,7 @@ $   THEN
 $!
 $!    We have SOCKETSHR, and it is my opinion that it's the best to use.
 $!
-$     P3 = "SOCKETSHR"
+$     P4 = "SOCKETSHR"
 $!
 $!    Tell the user
 $!
@@ -615,7 +791,7 @@ $     THEN
 $!
 $!	Last resort: a UCX or UCX-compatible library
 $!
-$	P3 = "UCX"
+$	P4 = "UCX"
 $!
 $!      Tell the user
 $!
@@ -629,22 +805,46 @@ $ ENDIF
 $!
 $! Set Up Initial CC Definitions, Possibly With User Ones
 $!
-$ CCDEFS = "MONOLITH"
+$ CCDEFS = "VMS=1,MONOLITH"
+$ IF F$TRNLNM("OPENSSL_NO_ASM") THEN CCDEFS = CCDEFS + ",NO_ASM"
+$ IF F$TRNLNM("OPENSSL_NO_RSA") THEN CCDEFS = CCDEFS + ",NO_RSA"
+$ IF F$TRNLNM("OPENSSL_NO_DSA") THEN CCDEFS = CCDEFS + ",NO_DSA"
+$ IF F$TRNLNM("OPENSSL_NO_DH") THEN CCDEFS = CCDEFS + ",NO_DH"
+$ IF F$TRNLNM("OPENSSL_NO_MD2") THEN CCDEFS = CCDEFS + ",NO_MD2"
+$ IF F$TRNLNM("OPENSSL_NO_MD5") THEN CCDEFS = CCDEFS + ",NO_MD5"
+$ IF F$TRNLNM("OPENSSL_NO_RIPEMD") THEN CCDEFS = CCDEFS + ",NO_RIPEMD"
+$ IF F$TRNLNM("OPENSSL_NO_SHA") THEN CCDEFS = CCDEFS + ",NO_SHA"
+$ IF F$TRNLNM("OPENSSL_NO_SHA0") THEN CCDEFS = CCDEFS + ",NO_SHA0"
+$ IF F$TRNLNM("OPENSSL_NO_SHA1") THEN CCDEFS = CCDEFS + ",NO_SHA1"
+$ IF F$TRNLNM("OPENSSL_NO_DES")
+$ THEN
+$   CCDEFS = CCDEFS + ",NO_DES,NO_MDC2"
+$ ELSE
+$   IF F$TRNLNM("OPENSSL_NO_MDC2") THEN CCDEFS = CCDEFS + ",NO_MDC2"
+$ ENDIF
+$ IF F$TRNLNM("OPENSSL_NO_RC2") THEN CCDEFS = CCDEFS + ",NO_RC2"
+$ IF F$TRNLNM("OPENSSL_NO_RC4") THEN CCDEFS = CCDEFS + ",NO_RC4"
+$ IF F$TRNLNM("OPENSSL_NO_RC5") THEN CCDEFS = CCDEFS + ",NO_RC5"
+$ IF F$TRNLNM("OPENSSL_NO_IDEA") THEN CCDEFS = CCDEFS + ",NO_IDEA"
+$ IF F$TRNLNM("OPENSSL_NO_BF") THEN CCDEFS = CCDEFS + ",NO_BF"
+$ IF F$TRNLNM("OPENSSL_NO_CAST") THEN CCDEFS = CCDEFS + ",NO_CAST"
+$ IF F$TRNLNM("OPENSSL_NO_HMAC") THEN CCDEFS = CCDEFS + ",NO_HMAC"
+$ IF F$TRNLNM("OPENSSL_NO_SSL2") THEN CCDEFS = CCDEFS + ",NO_SSL2"
 $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
 $ CCEXTRAFLAGS = ""
 $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
+$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
 $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
 $!
 $!  Check To See If The User Entered A Valid Paramter.
 $!
-$ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC")
+$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC")
 $ THEN
 $!
 $!  Check To See If The User Wanted DECC.
 $!
-$   IF (P2.EQS."DECC")
+$   IF (P3.EQS."DECC")
 $   THEN
 $!
 $!    Looks Like DECC, Set To Use DECC.
@@ -661,8 +861,7 @@ $     CC = "CC"
 $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
-           "/NOLIST/PREFIX=ALL" + -
-	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+           "/NOLIST/PREFIX=ALL" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
@@ -674,7 +873,7 @@ $   ENDIF
 $!
 $!  Check To See If We Are To Use VAXC.
 $!
-$   IF (P2.EQS."VAXC")
+$   IF (P3.EQS."VAXC")
 $   THEN
 $!
 $!    Looks Like VAXC, Set To Use VAXC.
@@ -693,8 +892,7 @@ $	WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
 $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + CCEXTRAFLAGS
 $     CCDEFS = CCDEFS + ",""VAXC"""
 $!
 $!    Define <sys> As SYS$COMMON:[SYSLIB]
@@ -711,7 +909,7 @@ $   ENDIF
 $!
 $!  Check To See If We Are To Use GNU C.
 $!
-$   IF (P2.EQS."GNUC")
+$   IF (P3.EQS."GNUC")
 $   THEN
 $!
 $!    Looks Like GNUC, Set To Use GNUC.
@@ -725,8 +923,7 @@ $!
 $!    Use GNU C...
 $!
 $     IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC
-$     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+$     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
@@ -740,6 +937,31 @@ $!  Set up default defines
 $!
 $   CCDEFS = """FLAT_INC=1""," + CCDEFS
 $!
+$!  Check To See If We Are To Compile With RSAREF Routines.
+$!
+$   IF (RSAREF.EQS."TRUE")
+$   THEN
+$!
+$!    Compile With RSAREF.
+$!
+$     CCDEFS = CCDEFS + ",""RSAref=1"""
+$!
+$!    Tell The User This.
+$!
+$     WRITE SYS$OUTPUT "Compiling With RSAREF Routines."
+$!
+$!    Else, We Don't Care.  Compile Without The RSAREF Library.
+$!
+$   ELSE
+$!
+$!    Tell The User We Are Compile Without The RSAREF Routines.
+$!
+$     WRITE SYS$OUTPUT "Compiling Without The RSAREF Routines.
+$!
+$!  End The RSAREF Check.
+$!
+$   ENDIF
+$!
 $!  Else The User Entered An Invalid Arguement.
 $!
 $ ELSE
@@ -747,7 +969,7 @@ $!
 $!  Tell The User We Don't Know What They Want.
 $!
 $   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"
+$   WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"
 $   WRITE SYS$OUTPUT ""
 $   WRITE SYS$OUTPUT "    VAXC  :  To Compile With VAX C."
 $   WRITE SYS$OUTPUT "    DECC  :  To Compile With DEC C."
@@ -761,18 +983,17 @@ $ ENDIF
 $!
 $! Time to check the contents, and to make sure we get the correct library.
 $!
-$ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" -
-     .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE"
+$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX"
 $ THEN
 $!
 $!  Check to see if SOCKETSHR was chosen
 $!
-$   IF P3.EQS."SOCKETSHR"
+$   IF P4.EQS."SOCKETSHR"
 $   THEN
 $!
 $!    Set the library to use SOCKETSHR
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$     TCPIP_LIB = "[-.VMS]SOCKETSHR_SHR.OPT/OPT"
 $!
 $!    Done with SOCKETSHR
 $!
@@ -780,12 +1001,12 @@ $   ENDIF
 $!
 $!  Check to see if MULTINET was chosen
 $!
-$   IF P3.EQS."MULTINET"
+$   IF P4.EQS."MULTINET"
 $   THEN
 $!
 $!    Set the library to use UCX emulation.
 $!
-$     P3 = "UCX"
+$     P4 = "UCX"
 $!
 $!    Done with MULTINET
 $!
@@ -793,53 +1014,27 @@ $   ENDIF
 $!
 $!  Check to see if UCX was chosen
 $!
-$   IF P3.EQS."UCX"
+$   IF P4.EQS."UCX"
 $   THEN
 $!
 $!    Set the library to use UCX.
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$     TCPIP_LIB = "[-.VMS]UCX_SHR_DECC.OPT/OPT"
 $     IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
 $     THEN
-$       TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$       TCPIP_LIB = "[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
 $     ELSE
 $       IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
-	  TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+	  TCPIP_LIB = "[-.VMS]UCX_SHR_VAXC.OPT/OPT"
 $     ENDIF
 $!
 $!    Done with UCX
 $!
 $   ENDIF
 $!
-$!  Check to see if TCPIP (post UCX) was chosen
-$!
-$   IF P3.EQS."TCPIP"
-$   THEN
-$!
-$!    Set the library to use TCPIP.
-$!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
-$!
-$!    Done with TCPIP
-$!
-$   ENDIF
-$!
-$!  Check to see if NONE was chosen
-$!
-$   IF P3.EQS."NONE"
-$   THEN
-$!
-$!    Do not use TCPIP.
-$!
-$     TCPIP_LIB = ""
-$!
-$!    Done with TCPIP
-$!
-$   ENDIF
-$!
 $!  Add TCP/IP type to CC definitions.
 $!
-$   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'"
+$   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P4'"
 $!
 $!  Print info
 $!
@@ -852,11 +1047,10 @@ $!
 $!  Tell The User We Don't Know What They Want.
 $!
 $   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"
+$   WRITE SYS$OUTPUT "The Option ",P4," Is Invalid.  The Valid Options Are:"
 $   WRITE SYS$OUTPUT ""
 $   WRITE SYS$OUTPUT "    SOCKETSHR  :  To link with SOCKETSHR TCP/IP library."
 $   WRITE SYS$OUTPUT "    UCX        :  To link with UCX TCP/IP library."
-$   WRITE SYS$OUTPUT "    TCPIP      :  To link with TCPIP (post UCX) TCP/IP library."
 $   WRITE SYS$OUTPUT ""
 $!
 $!  Time To EXIT.
@@ -883,7 +1077,7 @@ $ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
 $!
 $! Show user the result
 $!
-$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC
+$ WRITE SYS$OUTPUT "Main Compiling Command: ",CC
 $!
 $! Special Threads For OpenVMS v7.1 Or Later
 $!
@@ -891,9 +1085,9 @@ $! Written By:  Richard Levitte
 $!              richard@levitte.org
 $!
 $!
-$! Check To See If We Have A Option For P4.
+$! Check To See If We Have A Option For P5.
 $!
-$ IF (P4.EQS."")
+$ IF (P5.EQS."")
 $ THEN
 $!
 $!  Get The Version Of VMS We Are Using.
@@ -915,15 +1109,15 @@ $!  End The VMS Version Check.
 $!
 $   ENDIF
 $!
-$! End The P4 Check.
+$! End The P5 Check.
 $!
 $ ENDIF
 $!
 $! Check if the user wanted to compile just a subset of all the programs.
 $!
-$ IF P5 .NES. ""
+$ IF P6 .NES. ""
 $ THEN
-$   PROGRAMS = P5
+$   PROGRAMS = P6
 $ ENDIF
 $!
 $!  Time To RETURN...
@@ -939,7 +1133,6 @@ $!
 $! Save directory information
 $!
 $ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
-$ __HERE = F$EDIT(__HERE,"UPCASE")
 $ __TOP = __HERE - "APPS]"
 $ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
 $!

apps/nseq.c

@@ -58,9 +58,9 @@
 
 #include <stdio.h>
 #include <string.h>
-#include "apps.h"
 #include <openssl/pem.h>
 #include <openssl/err.h>
+#include "apps.h"
 
 #undef PROG
 #define PROG nseq_main
@@ -102,7 +102,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-in file  input file\n");
 		BIO_printf (bio_err, "-out file output file\n");
 		BIO_printf (bio_err, "-toseq    output NS Sequence file\n");
-		OPENSSL_EXIT(1);
+		EXIT(1);
 	}
 
 	if (infile) {
@@ -119,15 +119,8 @@ int MAIN(int argc, char **argv)
 				 "Can't open output file %s\n", outfile);
 			goto end;
 		}
-	} else {
-		out = BIO_new_fp(stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-	}
+	} else out = BIO_new_fp(stdout, BIO_NOCLOSE);
+
 	if (toseq) {
 		seq = NETSCAPE_CERT_SEQUENCE_new();
 		seq->certs = sk_X509_new_null();
@@ -159,9 +152,9 @@ int MAIN(int argc, char **argv)
 	ret = 0;
 end:
 	BIO_free(in);
-	BIO_free_all(out);
+	BIO_free(out);
 	NETSCAPE_CERT_SEQUENCE_free(seq);
 
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 }
 

apps/openssl-vms.cnf

@@ -3,13 +3,9 @@
 # This is mostly being used for generation of certificate requests.
 #
 
-# This definition stops the following lines choking if HOME isn't
-# defined.
-HOME			= .
 RANDFILE		= $ENV::HOME/.rnd
-
-# Uncomment out to enable OpenSSL configuration see config(3)
-# openssl_conf = openssl_init
+oid_file		= $ENV::HOME/.oid
+oid_section		= new_oids
 
 # To use this configuration file with the "-extfile" option of the
 # "openssl x509" utility, name here the section containing the
@@ -18,22 +14,13 @@ RANDFILE		= $ENV::HOME/.rnd
 # (Alternatively, use a configuration file that has only
 # X.509v3 extensions in its main [= default] section.)
 
-[openssl_init]
-# Extra OBJECT IDENTIFIER info:
-oid_section = new_oids
-alg_section = algs
-
 [ new_oids ]
 
-# We can add new OIDs in here for use by any config aware application
+# We can add new OIDs in here for use by 'ca' and 'req'.
 # Add a simple OID like this:
-# shortname=Long Object Identifier Name, 1.2.3.4
+# testoid1=1.2.3.4
 # Or use config file substitution like this:
-# testoid2=OID2 LONG NAME, ${testoid1}.5.6, OTHER OID
-
-[ algs ]
-# Algorithm configuration options. Currently just fips_mode
-fips_mode = no
+# testoid2=${testoid1}.5.6
 
 ####################################################################
 [ ca ]
@@ -42,40 +29,27 @@ default_ca	= CA_default		# The default ca section
 ####################################################################
 [ CA_default ]
 
-dir		= sys\$disk:[.demoCA		# Where everything is kept
+dir		= sys\$disk:[.demoCA	# Where everything is kept
 certs		= $dir.certs]		# Where the issued certs are kept
 crl_dir		= $dir.crl]		# Where the issued crl are kept
 database	= $dir]index.txt	# database index file.
-#unique_subject	= no			# Set to 'no' to allow creation of
-					# several ctificates with same subject.
-new_certs_dir	= $dir.newcerts]		# default place for new certs.
+new_certs_dir	= $dir.newcerts]	# default place for new certs.
 
 certificate	= $dir]cacert.pem 	# The CA certificate
-serial		= $dir]serial. 		# The current serial number
-crlnumber	= $dir]crlnumber.	# the current crl number
-					# must be commented out to leave a V1 CRL
+serial		= $dir]serial.		# The current serial number
 crl		= $dir]crl.pem 		# The current CRL
 private_key	= $dir.private]cakey.pem# The private key
 RANDFILE	= $dir.private].rand	# private random number file
 
 x509_extensions	= usr_cert		# The extentions to add to the cert
 
-# Comment out the following two lines for the "traditional"
-# (and highly broken) format.
-name_opt 	= ca_default		# Subject Name options
-cert_opt 	= ca_default		# Certificate field options
-
-# Extension copying option: use with caution.
-# copy_extensions = copy
-
 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
-# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= sha1			# which md to use.
+default_md	= md5			# which md to use.
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -112,19 +86,16 @@ distinguished_name	= req_distinguished_name
 attributes		= req_attributes
 x509_extensions	= v3_ca	# The extentions to add to the self signed cert
 
-# Passwords for private keys if not present they will be prompted for
-# input_password = secret
-# output_password = secret
-
-# This sets a mask for permitted string types. There are several options. 
+# This sets the permitted types in a DirectoryString. There are several
+# options. 
 # default: PrintableString, T61String, BMPString.
 # pkix	 : PrintableString, BMPString.
 # utf8only: only UTF8Strings.
-# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
+# nobmp : PrintableString, T61String (no BMPStrings).
 # MASK:XXXX a literal mask value.
 # WARNING: current versions of Netscape crash on BMPStrings or UTF8Strings
 # so use this option with caution!
-string_mask = nombstr
+dirstring_type = nobmp
 
 # req_extensions = v3_req # The extensions to add to a certificate request
 
@@ -153,7 +124,7 @@ commonName			= Common Name (eg, YOUR name)
 commonName_max			= 64
 
 emailAddress			= Email Address
-emailAddress_max		= 64
+emailAddress_max		= 40
 
 # SET-ex3			= SET extension number 3
 
@@ -196,14 +167,11 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer
+authorityKeyIdentifier=keyid,issuer:always
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
 # subjectAltName=email:copy
-# An alternative to produce certificates that aren't
-# deprecated according to PKIX.
-# subjectAltName=email:move
 
 # Copy subject details
 # issuerAltName=issuer:copy
@@ -266,56 +234,3 @@ basicConstraints = CA:true
 
 # issuerAltName=issuer:copy
 authorityKeyIdentifier=keyid:always,issuer:always
-
-[ proxy_cert_ext ]
-# These extensions should be added when creating a proxy certificate
-
-# This goes against PKIX guidelines but some CAs do it and some software
-# requires this to avoid interpreting an end user certificate as a CA.
-
-basicConstraints=CA:FALSE
-
-# Here are some examples of the usage of nsCertType. If it is omitted
-# the certificate can be used for anything *except* object signing.
-
-# This is OK for an SSL server.
-# nsCertType			= server
-
-# For an object signing certificate this would be used.
-# nsCertType = objsign
-
-# For normal client use this is typical
-# nsCertType = client, email
-
-# and for everything including object signing:
-# nsCertType = client, email, objsign
-
-# This is typical in keyUsage for a client certificate.
-# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
-
-# This will be displayed in Netscape's comment listbox.
-nsComment			= "OpenSSL Generated Certificate"
-
-# PKIX recommendations harmless if included in all certificates.
-subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
-
-# This stuff is for subjectAltName and issuerAltname.
-# Import the email address.
-# subjectAltName=email:copy
-# An alternative to produce certificates that aren't
-# deprecated according to PKIX.
-# subjectAltName=email:move
-
-# Copy subject details
-# issuerAltName=issuer:copy
-
-#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
-#nsBaseUrl
-#nsRevocationUrl
-#nsRenewalUrl
-#nsCaPolicyUrl
-#nsSslServerName
-
-# This really needs to be in place for it to be a proxy certificate.
-proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

apps/openssl.c

@@ -55,66 +55,11 @@
  * copied and put under another distribution licence
  * [including the GNU Public Licence.]
  */
-/* ====================================================================
- * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
 
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #define OPENSSL_C /* tells apps.h to use complete apps_startup() */
-#include "apps.h"
 #include <openssl/bio.h>
 #include <openssl/crypto.h>
 #include <openssl/lhash.h>
@@ -122,108 +67,31 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #include <openssl/ssl.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
 #define USE_SOCKETS /* needed for the _O_BINARY defs in the MS world */
+#include "apps.h"
 #include "progs.h"
 #include "s_apps.h"
 #include <openssl/err.h>
 
-/* The LHASH callbacks ("hash" & "cmp") have been replaced by functions with the
- * base prototypes (we cast each variable inside the function to the required
- * type of "FUNCTION*"). This removes the necessity for macro-generated wrapper
- * functions. */
-
-/* static unsigned long MS_CALLBACK hash(FUNCTION *a); */
-static unsigned long MS_CALLBACK hash(const void *a_void);
-/* static int MS_CALLBACK cmp(FUNCTION *a,FUNCTION *b); */
-static int MS_CALLBACK cmp(const void *a_void,const void *b_void);
+static unsigned long MS_CALLBACK hash(FUNCTION *a);
+static int MS_CALLBACK cmp(FUNCTION *a,FUNCTION *b);
 static LHASH *prog_init(void );
 static int do_cmd(LHASH *prog,int argc,char *argv[]);
+LHASH *config=NULL;
 char *default_config_file=NULL;
 
 /* Make sure there is only one when MONOLITH is defined */
 #ifdef MONOLITH
-CONF *config=NULL;
 BIO *bio_err=NULL;
-int in_FIPS_mode=0;
 #endif
 
-
-static void lock_dbg_cb(int mode, int type, const char *file, int line)
-	{
-	static int modes[CRYPTO_NUM_LOCKS]; /* = {0, 0, ... } */
-	const char *errstr = NULL;
-	int rw;
-	
-	rw = mode & (CRYPTO_READ|CRYPTO_WRITE);
-	if (!((rw == CRYPTO_READ) || (rw == CRYPTO_WRITE)))
-		{
-		errstr = "invalid mode";
-		goto err;
-		}
-
-	if (type < 0 || type >= CRYPTO_NUM_LOCKS)
-		{
-		errstr = "type out of bounds";
-		goto err;
-		}
-
-	if (mode & CRYPTO_LOCK)
-		{
-		if (modes[type])
-			{
-			errstr = "already locked";
-			/* must not happen in a single-threaded program
-			 * (would deadlock) */
-			goto err;
-			}
-
-		modes[type] = rw;
-		}
-	else if (mode & CRYPTO_UNLOCK)
-		{
-		if (!modes[type])
-			{
-			errstr = "not locked";
-			goto err;
-			}
-		
-		if (modes[type] != rw)
-			{
-			errstr = (rw == CRYPTO_READ) ?
-				"CRYPTO_r_unlock on write lock" :
-				"CRYPTO_w_unlock on read lock";
-			}
-
-		modes[type] = 0;
-		}
-	else
-		{
-		errstr = "invalid mode";
-		goto err;
-		}
-
- err:
-	if (errstr)
-		{
-		/* we cannot use bio_err here */
-		fprintf(stderr, "openssl (lock_dbg_cb): %s (mode=%d, type=%d) at %s:%d\n",
-			errstr, mode, type, file, line);
-		}
-	}
-
-
 int main(int Argc, char *Argv[])
 	{
 	ARGS arg;
-#define PROG_NAME_SIZE	39
-	char pname[PROG_NAME_SIZE+1];
+#define PROG_NAME_SIZE	16
+	char pname[PROG_NAME_SIZE];
 	FUNCTION f,*fp;
-	MS_STATIC const char *prompt;
-	MS_STATIC char buf[1024];
-	char *to_free=NULL;
+	MS_STATIC char *prompt,buf[1024],config_name[256];
 	int n,i,ret=0;
 	int argc;
 	char **argv,*p;
@@ -233,69 +101,41 @@ int main(int Argc, char *Argv[])
 	arg.data=NULL;
 	arg.count=0;
 
-	in_FIPS_mode = 0;
+	if (getenv("OPENSSL_DEBUG_MEMORY") != NULL)
+		CRYPTO_malloc_debug_init();
+	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
 
-#ifdef OPENSSL_FIPS
-	if(getenv("OPENSSL_FIPS")) {
-		if (!FIPS_mode_set(1)) {
-			ERR_load_crypto_strings();
-			ERR_print_errors(BIO_new_fp(stderr,BIO_NOCLOSE));
-			EXIT(1);
-		}
-		in_FIPS_mode = 1;
-		}
-#endif
+	apps_startup();
 
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (getenv("OPENSSL_DEBUG_MEMORY") != NULL) /* if not defined, use compiled-in library defaults */
-		{
-		if (!(0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off")))
-			{
-			CRYPTO_malloc_debug_init();
-			CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
-			}
-		else
-			{
-			/* OPENSSL_DEBUG_MEMORY=off */
-			CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0);
-			}
-		}
-	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
-
-#if 0
-	if (getenv("OPENSSL_DEBUG_LOCKING") != NULL)
-#endif
-		{
-		CRYPTO_set_locking_callback(lock_dbg_cb);
-		}
-
-	apps_startup();
+	ERR_load_crypto_strings();
 
 	/* Lets load up our environment a little */
 	p=getenv("OPENSSL_CONF");
 	if (p == NULL)
 		p=getenv("SSLEAY_CONF");
 	if (p == NULL)
-		p=to_free=make_config_name();
+		{
+		strcpy(config_name,X509_get_default_cert_area());
+#ifndef VMS
+		strcat(config_name,"/");
+#endif
+		strcat(config_name,OPENSSL_CONF);
+		p=config_name;
+		}
 
 	default_config_file=p;
 
-	config=NCONF_new(NULL);
-	i=NCONF_load(config,p,&errline);
-	if (i == 0)
-		{
-		NCONF_free(config);
-		config = NULL;
-		ERR_clear_error();
-		}
+	config=CONF_load(config,p,&errline);
+	if (config == NULL) ERR_clear_error();
 
 	prog=prog_init();
 
 	/* first check the program name */
-	program_name(Argv[0],pname,sizeof pname);
+	program_name(Argv[0],pname,PROG_NAME_SIZE);
 
 	f.name=pname;
 	fp=(FUNCTION *)lh_retrieve(prog,&f);
@@ -323,7 +163,7 @@ int main(int Argc, char *Argv[])
 		{
 		ret=0;
 		p=buf;
-		n=sizeof buf;
+		n=1024;
 		i=0;
 		for (;;)
 			{
@@ -357,25 +197,25 @@ int main(int Argc, char *Argv[])
 	BIO_printf(bio_err,"bad exit\n");
 	ret=1;
 end:
-	if (to_free)
-		OPENSSL_free(to_free);
 	if (config != NULL)
 		{
-		NCONF_free(config);
+		CONF_free(config);
 		config=NULL;
 		}
 	if (prog != NULL) lh_free(prog);
 	if (arg.data != NULL) OPENSSL_free(arg.data);
+	ERR_remove_state(0);
 
-	apps_shutdown();
-
+	EVP_cleanup();
+	ERR_free_strings();
+	
 	CRYPTO_mem_leaks(bio_err);
 	if (bio_err != NULL)
 		{
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 #define LIST_STANDARD_COMMANDS "list-standard-commands"
@@ -398,19 +238,13 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 	else if ((strncmp(argv[0],"no-",3)) == 0)
 		{
 		BIO *bio_stdout = BIO_new_fp(stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		bio_stdout = BIO_push(tmpbio, bio_stdout);
-		}
-#endif
 		f.name=argv[0]+3;
 		ret = (lh_retrieve(prog,&f) != NULL);
 		if (!ret)
 			BIO_printf(bio_stdout, "%s\n", argv[0]);
 		else
 			BIO_printf(bio_stdout, "%s\n", argv[0]+3);
-		BIO_free_all(bio_stdout);
+		BIO_free(bio_stdout);
 		goto end;
 		}
 	else if ((strcmp(argv[0],"quit") == 0) ||
@@ -435,17 +269,11 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 		else /* strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0 */
 			list_type = FUNC_TYPE_CIPHER;
 		bio_stdout = BIO_new_fp(stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		bio_stdout = BIO_push(tmpbio, bio_stdout);
-		}
-#endif
 		
 		for (fp=functions; fp->name != NULL; fp++)
 			if (fp->type == list_type)
 				BIO_printf(bio_stdout, "%s\n", fp->name);
-		BIO_free_all(bio_stdout);
+		BIO_free(bio_stdout);
 		ret=0;
 		goto end;
 		}
@@ -459,11 +287,7 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 		for (fp=functions; fp->name != NULL; fp++)
 			{
 			nl=0;
-#ifdef OPENSSL_NO_CAMELLIA
 			if (((i++) % 5) == 0)
-#else
-			if (((i++) % 4) == 0)
-#endif
 				{
 				BIO_printf(bio_err,"\n");
 				nl=1;
@@ -484,11 +308,7 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 					BIO_printf(bio_err,"\nCipher commands (see the `enc' command for more details)\n");
 					}
 				}
-#ifdef OPENSSL_NO_CAMELLIA
 			BIO_printf(bio_err,"%-15s",fp->name);
-#else
-			BIO_printf(bio_err,"%-18s",fp->name);
-#endif
 			}
 		BIO_printf(bio_err,"\n\n");
 		ret=0;
@@ -511,30 +331,26 @@ static LHASH *prog_init(void)
 	{
 	LHASH *ret;
 	FUNCTION *f;
-	size_t i;
+	int i;
 
 	/* Purely so it looks nice when the user hits ? */
 	for(i=0,f=functions ; f->name != NULL ; ++f,++i)
 	    ;
 	qsort(functions,i,sizeof *functions,SortFnByName);
 
-	if ((ret=lh_new(hash, cmp)) == NULL)
-		return(NULL);
+	if ((ret=lh_new(hash,cmp)) == NULL) return(NULL);
 
 	for (f=functions; f->name != NULL; f++)
 		lh_insert(ret,f);
 	return(ret);
 	}
 
-/* static int MS_CALLBACK cmp(FUNCTION *a, FUNCTION *b) */
-static int MS_CALLBACK cmp(const void *a_void, const void *b_void)
+static int MS_CALLBACK cmp(FUNCTION *a, FUNCTION *b)
 	{
-	return(strncmp(((const FUNCTION *)a_void)->name,
-			((const FUNCTION *)b_void)->name,8));
+	return(strncmp(a->name,b->name,8));
 	}
 
-/* static unsigned long MS_CALLBACK hash(FUNCTION *a) */
-static unsigned long MS_CALLBACK hash(const void *a_void)
+static unsigned long MS_CALLBACK hash(FUNCTION *a)
 	{
-	return(lh_strhash(((const FUNCTION *)a_void)->name));
+	return(lh_strhash(a->name));
 	}

apps/openssl.cnf

@@ -8,8 +8,9 @@
 HOME			= .
 RANDFILE		= $ENV::HOME/.rnd
 
-# Uncomment out to enable OpenSSL configuration see config(3)
-# openssl_conf = openssl_init
+# Extra OBJECT IDENTIFIER info:
+#oid_file		= $ENV::HOME/.oid
+oid_section		= new_oids
 
 # To use this configuration file with the "-extfile" option of the
 # "openssl x509" utility, name here the section containing the
@@ -18,22 +19,13 @@ RANDFILE		= $ENV::HOME/.rnd
 # (Alternatively, use a configuration file that has only
 # X.509v3 extensions in its main [= default] section.)
 
-[openssl_init]
-# Extra OBJECT IDENTIFIER info:
-oid_section = new_oids
-alg_section = algs
-
 [ new_oids ]
 
-# We can add new OIDs in here for use by any config aware application
+# We can add new OIDs in here for use by 'ca' and 'req'.
 # Add a simple OID like this:
-# shortname=Long Object Identifier Name, 1.2.3.4
+# testoid1=1.2.3.4
 # Or use config file substitution like this:
-# testoid2=OID2 LONG NAME, ${testoid1}.5.6, OTHER OID
-
-[ algs ]
-# Algorithm configuration options. Currently just fips_mode
-fips_mode = no
+# testoid2=${testoid1}.5.6
 
 ####################################################################
 [ ca ]
@@ -46,36 +38,23 @@ dir		= ./demoCA		# Where everything is kept
 certs		= $dir/certs		# Where the issued certs are kept
 crl_dir		= $dir/crl		# Where the issued crl are kept
 database	= $dir/index.txt	# database index file.
-#unique_subject	= no			# Set to 'no' to allow creation of
-					# several ctificates with same subject.
 new_certs_dir	= $dir/newcerts		# default place for new certs.
 
 certificate	= $dir/cacert.pem 	# The CA certificate
 serial		= $dir/serial 		# The current serial number
-crlnumber	= $dir/crlnumber	# the current crl number
-					# must be commented out to leave a V1 CRL
 crl		= $dir/crl.pem 		# The current CRL
 private_key	= $dir/private/cakey.pem# The private key
 RANDFILE	= $dir/private/.rand	# private random number file
 
 x509_extensions	= usr_cert		# The extentions to add to the cert
 
-# Comment out the following two lines for the "traditional"
-# (and highly broken) format.
-name_opt 	= ca_default		# Subject Name options
-cert_opt 	= ca_default		# Certificate field options
-
-# Extension copying option: use with caution.
-# copy_extensions = copy
-
 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
-# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= sha1			# which md to use.
+default_md	= md5			# which md to use.
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -153,7 +132,7 @@ commonName			= Common Name (eg, YOUR name)
 commonName_max			= 64
 
 emailAddress			= Email Address
-emailAddress_max		= 64
+emailAddress_max		= 40
 
 # SET-ex3			= SET extension number 3
 
@@ -196,14 +175,11 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer
+authorityKeyIdentifier=keyid,issuer:always
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
 # subjectAltName=email:copy
-# An alternative to produce certificates that aren't
-# deprecated according to PKIX.
-# subjectAltName=email:move
 
 # Copy subject details
 # issuerAltName=issuer:copy
@@ -266,56 +242,3 @@ basicConstraints = CA:true
 
 # issuerAltName=issuer:copy
 authorityKeyIdentifier=keyid:always,issuer:always
-
-[ proxy_cert_ext ]
-# These extensions should be added when creating a proxy certificate
-
-# This goes against PKIX guidelines but some CAs do it and some software
-# requires this to avoid interpreting an end user certificate as a CA.
-
-basicConstraints=CA:FALSE
-
-# Here are some examples of the usage of nsCertType. If it is omitted
-# the certificate can be used for anything *except* object signing.
-
-# This is OK for an SSL server.
-# nsCertType			= server
-
-# For an object signing certificate this would be used.
-# nsCertType = objsign
-
-# For normal client use this is typical
-# nsCertType = client, email
-
-# and for everything including object signing:
-# nsCertType = client, email, objsign
-
-# This is typical in keyUsage for a client certificate.
-# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
-
-# This will be displayed in Netscape's comment listbox.
-nsComment			= "OpenSSL Generated Certificate"
-
-# PKIX recommendations harmless if included in all certificates.
-subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
-
-# This stuff is for subjectAltName and issuerAltname.
-# Import the email address.
-# subjectAltName=email:copy
-# An alternative to produce certificates that aren't
-# deprecated according to PKIX.
-# subjectAltName=email:move
-
-# Copy subject details
-# issuerAltName=issuer:copy
-
-#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
-#nsBaseUrl
-#nsRevocationUrl
-#nsRenewalUrl
-#nsCaPolicyUrl
-#nsSslServerName
-
-# This really needs to be in place for it to be a proxy certificate.
-proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

apps/passwd.c

@@ -1,10 +1,10 @@
 /* apps/passwd.c */
 
-#if defined OPENSSL_NO_MD5 || defined CHARSET_EBCDIC
+#if defined NO_MD5 || defined CHARSET_EBCDIC
 # define NO_MD5CRYPT_1
 #endif
 
-#if !defined(OPENSSL_NO_DES) || !defined(NO_MD5CRYPT_1)
+#if !defined(NO_DES) || !defined(NO_MD5CRYPT_1)
 
 #include <assert.h>
 #include <string.h>
@@ -15,7 +15,8 @@
 #include <openssl/err.h>
 #include <openssl/evp.h>
 #include <openssl/rand.h>
-#ifndef OPENSSL_NO_DES
+
+#ifndef NO_DES
 # include <openssl/des.h>
 #endif
 #ifndef NO_MD5CRYPT_1
@@ -49,7 +50,6 @@ static int do_passwd(int passed_salt, char **salt_p, char **salt_malloc_p,
  * -salt string  - salt
  * -in file      - read passwords from file
  * -stdin        - read passwords from stdin
- * -noverify     - never verify when reading password from terminal
  * -quiet        - no warnings
  * -table        - format output as table
  * -reverse      - switch table columns
@@ -62,7 +62,6 @@ int MAIN(int argc, char **argv)
 	int ret = 1;
 	char *infile = NULL;
 	int in_stdin = 0;
-	int in_noverify = 0;
 	char *salt = NULL, *passwd = NULL, **passwds = NULL;
 	char *salt_malloc = NULL, *passwd_malloc = NULL;
 	size_t passwd_malloc_size = 0;
@@ -78,19 +77,10 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
-
-	if (!load_config(bio_err, NULL))
-		goto err;
 	out = BIO_new(BIO_s_file());
 	if (out == NULL)
 		goto err;
 	BIO_set_fp(out, stdout, BIO_NOCLOSE | BIO_FP_TEXT);
-#ifdef OPENSSL_SYS_VMS
-	{
-	BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-	out = BIO_push(tmpbio, out);
-	}
-#endif
 
 	badopt = 0, opt_done = 0;
 	i = 0;
@@ -132,8 +122,6 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
-		else if (strcmp(argv[i], "-noverify") == 0)
-			in_noverify = 1;
 		else if (strcmp(argv[i], "-quiet") == 0)
 			quiet = 1;
 		else if (strcmp(argv[i], "-table") == 0)
@@ -159,7 +147,7 @@ int MAIN(int argc, char **argv)
 		badopt = 1;
 
 	/* reject unsupported algorithms */
-#ifdef OPENSSL_NO_DES
+#ifdef NO_DES
 	if (usecrypt) badopt = 1;
 #endif
 #ifdef NO_MD5CRYPT_1
@@ -170,7 +158,7 @@ int MAIN(int argc, char **argv)
 		{
 		BIO_printf(bio_err, "Usage: passwd [options] [passwords]\n");
 		BIO_printf(bio_err, "where options are\n");
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 		BIO_printf(bio_err, "-crypt             standard Unix password algorithm (default)\n");
 #endif
 #ifndef NO_MD5CRYPT_1
@@ -180,7 +168,6 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-salt string       use provided salt\n");
 		BIO_printf(bio_err, "-in file           read passwords from file\n");
 		BIO_printf(bio_err, "-stdin             read passwords from stdin\n");
-		BIO_printf(bio_err, "-noverify          never verify when reading password from terminal\n");
 		BIO_printf(bio_err, "-quiet             no warnings\n");
 		BIO_printf(bio_err, "-table             format output as table\n");
 		BIO_printf(bio_err, "-reverse           switch table columns\n");
@@ -229,7 +216,7 @@ int MAIN(int argc, char **argv)
 		
 		passwds = passwds_static;
 		if (in == NULL)
-			if (EVP_read_pw_string(passwd_malloc, passwd_malloc_size, "Password: ", !(passed_salt || in_noverify)) != 0)
+			if (EVP_read_pw_string(passwd_malloc, passwd_malloc_size, "Password: ", 0) != 0)
 				goto err;
 		passwds[0] = passwd_malloc;
 		}
@@ -279,7 +266,6 @@ int MAIN(int argc, char **argv)
 			}
 		while (!done);
 		}
-	ret = 0;
 
 err:
 	ERR_print_errors(bio_err);
@@ -290,9 +276,8 @@ err:
 	if (in)
 		BIO_free(in);
 	if (out)
-		BIO_free_all(out);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+		BIO_free(out);
+	EXIT(ret);
 	}
 
 
@@ -312,9 +297,8 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	static char out_buf[6 + 9 + 24 + 2]; /* "$apr1$..salt..$.......md5hash..........\0" */
 	unsigned char buf[MD5_DIGEST_LENGTH];
 	char *salt_out;
-	int n;
-	unsigned int i;
-	EVP_MD_CTX md,md2;
+	int n, i;
+	MD5_CTX md;
 	size_t passwd_len, salt_len;
 
 	passwd_len = strlen(passwd);
@@ -325,51 +309,53 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	strncat(out_buf, "$", 1);
 	strncat(out_buf, salt, 8);
 	assert(strlen(out_buf) <= 6 + 8); /* "$apr1$..salt.." */
-	salt_out = out_buf + 2 + strlen(magic);
+	salt_out = out_buf + 6;
 	salt_len = strlen(salt_out);
 	assert(salt_len <= 8);
 	
-	EVP_MD_CTX_init(&md);
-	EVP_DigestInit_ex(&md,EVP_md5(), NULL);
-	EVP_DigestUpdate(&md, passwd, passwd_len);
-	EVP_DigestUpdate(&md, "$", 1);
-	EVP_DigestUpdate(&md, magic, strlen(magic));
-	EVP_DigestUpdate(&md, "$", 1);
-	EVP_DigestUpdate(&md, salt_out, salt_len);
+	MD5_Init(&md);
+	MD5_Update(&md, passwd, passwd_len);
+	MD5_Update(&md, "$", 1);
+	MD5_Update(&md, magic, strlen(magic));
+	MD5_Update(&md, "$", 1);
+	MD5_Update(&md, salt_out, salt_len);
 	
-	EVP_MD_CTX_init(&md2);
-	EVP_DigestInit_ex(&md2,EVP_md5(), NULL);
-	EVP_DigestUpdate(&md2, passwd, passwd_len);
-	EVP_DigestUpdate(&md2, salt_out, salt_len);
-	EVP_DigestUpdate(&md2, passwd, passwd_len);
-	EVP_DigestFinal_ex(&md2, buf, NULL);
+	 {
+		MD5_CTX md2;
 
+		MD5_Init(&md2);
+		MD5_Update(&md2, passwd, passwd_len);
+		MD5_Update(&md2, salt_out, salt_len);
+		MD5_Update(&md2, passwd, passwd_len);
+		MD5_Final(buf, &md2);
+	 }
 	for (i = passwd_len; i > sizeof buf; i -= sizeof buf)
-		EVP_DigestUpdate(&md, buf, sizeof buf);
-	EVP_DigestUpdate(&md, buf, i);
+		MD5_Update(&md, buf, sizeof buf);
+	MD5_Update(&md, buf, i);
 	
 	n = passwd_len;
 	while (n)
 		{
-		EVP_DigestUpdate(&md, (n & 1) ? "\0" : passwd, 1);
+		MD5_Update(&md, (n & 1) ? "\0" : passwd, 1);
 		n >>= 1;
 		}
-	EVP_DigestFinal_ex(&md, buf, NULL);
+	MD5_Final(buf, &md);
 
 	for (i = 0; i < 1000; i++)
 		{
-		EVP_DigestInit_ex(&md2,EVP_md5(), NULL);
-		EVP_DigestUpdate(&md2, (i & 1) ? (unsigned const char *) passwd : buf,
-		                       (i & 1) ? passwd_len : sizeof buf);
+		MD5_CTX md2;
+
+		MD5_Init(&md2);
+		MD5_Update(&md2, (i & 1) ? (unsigned char *) passwd : buf,
+		                 (i & 1) ? passwd_len : sizeof buf);
 		if (i % 3)
-			EVP_DigestUpdate(&md2, salt_out, salt_len);
+			MD5_Update(&md2, salt_out, salt_len);
 		if (i % 7)
-			EVP_DigestUpdate(&md2, passwd, passwd_len);
-		EVP_DigestUpdate(&md2, (i & 1) ? buf : (unsigned const char *) passwd,
-		                       (i & 1) ? sizeof buf : passwd_len);
-		EVP_DigestFinal_ex(&md2, buf, NULL);
+			MD5_Update(&md2, passwd, passwd_len);
+		MD5_Update(&md2, (i & 1) ? buf : (unsigned char *) passwd,
+		                 (i & 1) ? sizeof buf : passwd_len);
+		MD5_Final(buf, &md2);
 		}
-	EVP_MD_CTX_cleanup(&md2);
 	
 	 {
 		/* transform buf into output string */
@@ -407,7 +393,6 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 		*output = 0;
 		assert(strlen(out_buf) < sizeof(out_buf));
 	 }
-	EVP_MD_CTX_cleanup(&md);
 
 	return out_buf;
 	}
@@ -426,7 +411,7 @@ static int do_passwd(int passed_salt, char **salt_p, char **salt_malloc_p,
 	/* first make sure we have a salt */
 	if (!passed_salt)
 		{
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 		if (usecrypt)
 			{
 			if (*salt_malloc_p == NULL)
@@ -445,7 +430,7 @@ static int do_passwd(int passed_salt, char **salt_p, char **salt_malloc_p,
 			                                    * back to ASCII */
 #endif
 			}
-#endif /* !OPENSSL_NO_DES */
+#endif /* !NO_DES */
 
 #ifndef NO_MD5CRYPT_1
 		if (use1 || useapr1)
@@ -474,16 +459,15 @@ static int do_passwd(int passed_salt, char **salt_p, char **salt_malloc_p,
 	if ((strlen(passwd) > pw_maxlen))
 		{
 		if (!quiet)
-			/* XXX: really we should know how to print a size_t, not cast it */
-			BIO_printf(bio_err, "Warning: truncating password to %u characters\n", (unsigned)pw_maxlen);
+			BIO_printf(bio_err, "Warning: truncating password to %u characters\n", pw_maxlen);
 		passwd[pw_maxlen] = 0;
 		}
 	assert(strlen(passwd) <= pw_maxlen);
 	
 	/* now compute password hash */
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	if (usecrypt)
-		hash = DES_crypt(passwd, *salt_p);
+		hash = des_crypt(passwd, *salt_p);
 #endif
 #ifndef NO_MD5CRYPT_1
 	if (use1 || useapr1)
@@ -507,6 +491,6 @@ err:
 int MAIN(int argc, char **argv)
 	{
 	fputs("Program not available.\n", stderr)
-	OPENSSL_EXIT(1);
+	EXIT(1);
 	}
 #endif

apps/pca-cert.srl

@@ -1 +1 @@
-07
+01

apps/pkcs12.c

@@ -1,9 +1,11 @@
 /* pkcs12.c */
+#if !defined(NO_DES) && !defined(NO_SHA1)
+
 /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
+ * project 1999.
  */
 /* ====================================================================
- * Copyright (c) 1999-2006 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -56,9 +58,6 @@
  *
  */
 
-#include <openssl/opensslconf.h>
-#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -67,10 +66,11 @@
 #include <openssl/err.h>
 #include <openssl/pem.h>
 #include <openssl/pkcs12.h>
+#include <openssl/engine.h>
 
 #define PROG pkcs12_main
 
-const EVP_CIPHER *enc;
+EVP_CIPHER *enc;
 
 
 #define NOKEYS		0x1
@@ -84,7 +84,7 @@ int dump_certs_keys_p12(BIO *out, PKCS12 *p12, char *pass, int passlen, int opti
 int dump_certs_pkeys_bags(BIO *out, STACK_OF(PKCS12_SAFEBAG) *bags, char *pass,
 			  int passlen, int options, char *pempass);
 int dump_certs_pkeys_bag(BIO *out, PKCS12_SAFEBAG *bags, char *pass, int passlen, int options, char *pempass);
-int print_attribs(BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name);
+int print_attribs(BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst, char *name);
 void hex_prin(BIO *out, unsigned char *buf, int len);
 int alg_print(BIO *x, X509_ALGOR *alg);
 int cert_load(BIO *in, STACK_OF(X509) *sk);
@@ -96,10 +96,9 @@ int MAIN(int argc, char **argv)
     ENGINE *e = NULL;
     char *infile=NULL, *outfile=NULL, *keyname = NULL;	
     char *certfile=NULL;
-    BIO *in=NULL, *out = NULL;
+    BIO *in=NULL, *out = NULL, *inkey = NULL, *certsin = NULL;
     char **args;
     char *name = NULL;
-    char *csp_name = NULL;
     PKCS12 *p12 = NULL;
     char pass[50], macpass[50];
     int export_cert = 0;
@@ -110,7 +109,7 @@ int MAIN(int argc, char **argv)
     int maciter = PKCS12_DEFAULT_ITER;
     int twopass = 0;
     int keytype = 0;
-    int cert_pbe;
+    int cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
     int key_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
     int ret = 1;
     int macver = 1;
@@ -121,25 +120,13 @@ int MAIN(int argc, char **argv)
     char *passin = NULL, *passout = NULL;
     char *inrand = NULL;
     char *CApath = NULL, *CAfile = NULL;
-#ifndef OPENSSL_NO_ENGINE
     char *engine=NULL;
-#endif
 
     apps_startup();
 
-#ifdef OPENSSL_FIPS
-    if (FIPS_mode())
-	cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
-    else
-#endif
-    cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
-
     enc = EVP_des_ede3_cbc();
     if (bio_err == NULL ) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
     args = argv + 1;
 
 
@@ -160,38 +147,20 @@ int MAIN(int argc, char **argv)
     			cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
 		else if (!strcmp (*args, "-export")) export_cert = 1;
 		else if (!strcmp (*args, "-des")) enc=EVP_des_cbc();
-		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 		else if (!strcmp (*args, "-idea")) enc=EVP_idea_cbc();
 #endif
-#ifndef OPENSSL_NO_SEED
-		else if (!strcmp(*args, "-seed")) enc=EVP_seed_cbc();
-#endif
-#ifndef OPENSSL_NO_AES
-		else if (!strcmp(*args,"-aes128")) enc=EVP_aes_128_cbc();
-		else if (!strcmp(*args,"-aes192")) enc=EVP_aes_192_cbc();
-		else if (!strcmp(*args,"-aes256")) enc=EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (!strcmp(*args,"-camellia128")) enc=EVP_camellia_128_cbc();
-		else if (!strcmp(*args,"-camellia192")) enc=EVP_camellia_192_cbc();
-		else if (!strcmp(*args,"-camellia256")) enc=EVP_camellia_256_cbc();
-#endif
+		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
 		else if (!strcmp (*args, "-noiter")) iter = 1;
 		else if (!strcmp (*args, "-maciter"))
 					 maciter = PKCS12_DEFAULT_ITER;
 		else if (!strcmp (*args, "-nomaciter"))
 					 maciter = 1;
-		else if (!strcmp (*args, "-nomac"))
-					 maciter = -1;
 		else if (!strcmp (*args, "-nodes")) enc=NULL;
 		else if (!strcmp (*args, "-certpbe")) {
 			if (args[1]) {
 				args++;
-				if (!strcmp(*args, "NONE"))
-					cert_pbe = -1;
-				else
-					cert_pbe=OBJ_txt2nid(*args);
+				cert_pbe=OBJ_txt2nid(*args);
 				if(cert_pbe == NID_undef) {
 					BIO_printf(bio_err,
 						 "Unknown PBE algorithm %s\n", *args);
@@ -201,10 +170,7 @@ int MAIN(int argc, char **argv)
 		} else if (!strcmp (*args, "-keypbe")) {
 			if (args[1]) {
 				args++;
-				if (!strcmp(*args, "NONE"))
-					key_pbe = -1;
-				else
-					key_pbe=OBJ_txt2nid(*args);
+				key_pbe=OBJ_txt2nid(*args);
 				if(key_pbe == NID_undef) {
 					BIO_printf(bio_err,
 						 "Unknown PBE algorithm %s\n", *args);
@@ -231,11 +197,6 @@ int MAIN(int argc, char **argv)
 			args++;	
 			name = *args;
 		    } else badarg = 1;
-		} else if (!strcmp (*args, "-CSP")) {
-		    if (args[1]) {
-			args++;	
-			csp_name = *args;
-		    } else badarg = 1;
 		} else if (!strcmp (*args, "-caname")) {
 		    if (args[1]) {
 			args++;	
@@ -278,13 +239,11 @@ int MAIN(int argc, char **argv)
 			args++;	
 			CAfile = *args;
 		    } else badarg = 1;
-#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 		    if (args[1]) {
 			args++;	
 			engine = *args;
 		    } else badarg = 1;
-#endif
 		} else badarg = 1;
 
 	} else badarg = 1;
@@ -313,19 +272,8 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-info         give info about PKCS#12 structure.\n");
 	BIO_printf (bio_err, "-des          encrypt private keys with DES\n");
 	BIO_printf (bio_err, "-des3         encrypt private keys with triple DES (default)\n");
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 	BIO_printf (bio_err, "-idea         encrypt private keys with idea\n");
-#endif
-#ifndef OPENSSL_NO_SEED
-	BIO_printf (bio_err, "-seed         encrypt private keys with seed\n");
-#endif
-#ifndef OPENSSL_NO_AES
-	BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
-	BIO_printf (bio_err, "              encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	BIO_printf (bio_err, "-camellia128, -camellia192, -camellia256\n");
-	BIO_printf (bio_err, "              encrypt PEM output with cbc camellia\n");
 #endif
 	BIO_printf (bio_err, "-nodes        don't encrypt private keys\n");
 	BIO_printf (bio_err, "-noiter       don't use encryption iteration\n");
@@ -339,18 +287,26 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
 	BIO_printf (bio_err, "-passin p     input file pass phrase source\n");
 	BIO_printf (bio_err, "-passout p    output file pass phrase source\n");
-#ifndef OPENSSL_NO_ENGINE
 	BIO_printf (bio_err, "-engine e     use engine e, possibly a hardware device.\n");
-#endif
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
     	goto end;
     }
 
-#ifndef OPENSSL_NO_ENGINE
-    e = setup_engine(bio_err, engine, 0);
-#endif
+    if (engine != NULL) {
+	if((e = ENGINE_by_id(engine)) == NULL) {
+	    BIO_printf(bio_err,"invalid engine \"%s\"\n", engine);
+	    goto end;
+	}
+	if(!ENGINE_set_default(e, ENGINE_METHOD_ALL)) {
+	    BIO_printf(bio_err,"can't use that engine\n");
+	    goto end;
+	}
+	BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+	/* Free our "structural" reference. */
+	ENGINE_free(e);
+    }
 
     if(passarg) {
 	if(export_cert) passargout = passarg;
@@ -396,20 +352,29 @@ int MAIN(int argc, char **argv)
 	    goto end;
    }
 
+   if (certfile) {
+    	if(!(certsin = BIO_new_file(certfile, "r"))) {
+	    BIO_printf(bio_err, "Can't open certificate file %s\n", certfile);
+	    perror (certfile);
+	    goto end;
+	}
+    }
+
+    if (keyname) {
+    	if(!(inkey = BIO_new_file(keyname, "r"))) {
+	    BIO_printf(bio_err, "Can't key certificate file %s\n", keyname);
+	    perror (keyname);
+	    goto end;
+	}
+     }
+
 #ifdef CRYPTO_MDEBUG
     CRYPTO_pop_info();
     CRYPTO_push_info("write files");
 #endif
 
-    if (!outfile) {
-	out = BIO_new_fp(stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-	{
-	    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-	    out = BIO_push(tmpbio, out);
-	}
-#endif
-    } else out = BIO_new_file(outfile, "wb");
+    if (!outfile) out = BIO_new_fp(stdout, BIO_NOCLOSE);
+    else out = BIO_new_file(outfile, "wb");
     if (!out) {
 	BIO_printf(bio_err, "Error opening output file %s\n",
 						outfile ? outfile : "<stdout>");
@@ -420,7 +385,7 @@ int MAIN(int argc, char **argv)
 #ifdef CRYPTO_MDEBUG
     CRYPTO_push_info("read MAC password");
 #endif
-	if(EVP_read_pw_string (macpass, sizeof macpass, "Enter MAC Password:", export_cert))
+	if(EVP_read_pw_string (macpass, 50, "Enter MAC Password:", export_cert))
 	{
     	    BIO_printf (bio_err, "Can't read Password\n");
     	    goto end;
@@ -432,94 +397,80 @@ int MAIN(int argc, char **argv)
 
     if (export_cert) {
 	EVP_PKEY *key = NULL;
-	X509 *ucert = NULL, *x = NULL;
+	STACK_OF(PKCS12_SAFEBAG) *bags = NULL;
+	STACK_OF(PKCS7) *safes = NULL;
+	PKCS12_SAFEBAG *bag = NULL;
+	PKCS8_PRIV_KEY_INFO *p8 = NULL;
+	PKCS7 *authsafe = NULL;
+	X509 *ucert = NULL;
 	STACK_OF(X509) *certs=NULL;
-	unsigned char *catmp = NULL;
+	char *catmp = NULL;
 	int i;
-
-	if ((options & (NOCERTS|NOKEYS)) == (NOCERTS|NOKEYS))
-		{	
-		BIO_printf(bio_err, "Nothing to do!\n");
-		goto export_end;
-		}
-
-	if (options & NOCERTS)
-		chain = 0;
+	unsigned char keyid[EVP_MAX_MD_SIZE];
+	unsigned int keyidlen = 0;
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_push_info("process -export_cert");
 	CRYPTO_push_info("reading private key");
 #endif
-	if (!(options & NOKEYS))
-		{
-		key = load_key(bio_err, keyname ? keyname : infile,
-				FORMAT_PEM, 1, passin, e, "private key");
-		if (!key)
-			goto export_end;
-		}
+	key = PEM_read_bio_PrivateKey(inkey ? inkey : in, NULL, NULL, passin);
+	if (!inkey) (void) BIO_reset(in);
+	else BIO_free(inkey);
+	if (!key) {
+		BIO_printf (bio_err, "Error loading private key\n");
+		ERR_print_errors(bio_err);
+		goto export_end;
+	}
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("reading certs from input");
 #endif
 
+	certs = sk_X509_new_null();
+
 	/* Load in all certs in input file */
-	if(!(options & NOCERTS))
-		{
-		certs = load_certs(bio_err, infile, FORMAT_PEM, NULL, e,
-							"certificates");
-		if (!certs)
-			goto export_end;
-
-		if (key)
-			{
-			/* Look for matching private key */
-			for(i = 0; i < sk_X509_num(certs); i++)
-				{
-				x = sk_X509_value(certs, i);
-				if(X509_check_private_key(x, key))
-					{
-					ucert = x;
-					/* Zero keyid and alias */
-					X509_keyid_set1(ucert, NULL, 0);
-					X509_alias_set1(ucert, NULL, 0);
-					/* Remove from list */
-					sk_X509_delete(certs, i);
-					break;
-					}
-				}
-			if (!ucert)
-				{
-				BIO_printf(bio_err, "No certificate matches private key\n");
-				goto export_end;
-				}
-			}
-
-		}
+	if(!cert_load(in, certs)) {
+		BIO_printf(bio_err, "Error loading certificates from input\n");
+		ERR_print_errors(bio_err);
+		goto export_end;
+	}
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("reading certs from input 2");
 #endif
 
-	/* Add any more certificates asked for */
-	if(certfile)
-		{
-		STACK_OF(X509) *morecerts=NULL;
-		if(!(morecerts = load_certs(bio_err, certfile, FORMAT_PEM,
-					    NULL, e,
-					    "certificates from certfile")))
-			goto export_end;
-		while(sk_X509_num(morecerts) > 0)
-			sk_X509_push(certs, sk_X509_shift(morecerts));
-		sk_X509_free(morecerts);
- 		}
-
+	for(i = 0; i < sk_X509_num(certs); i++) {
+		ucert = sk_X509_value(certs, i);
+		if(X509_check_private_key(ucert, key)) {
+			X509_digest(ucert, EVP_sha1(), keyid, &keyidlen);
+			break;
+		}
+	}
+	if(!keyidlen) {
+		ucert = NULL;
+		BIO_printf(bio_err, "No certificate matches private key\n");
+		goto export_end;
+	}
+	
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("reading certs from certfile");
 #endif
 
+	bags = sk_PKCS12_SAFEBAG_new_null ();
+
+	/* Add any more certificates asked for */
+	if (certsin) {
+		if(!cert_load(certsin, certs)) {
+			BIO_printf(bio_err, "Error loading certificates from certfile\n");
+			ERR_print_errors(bio_err);
+			goto export_end;
+		}
+	    	BIO_free(certsin);
+ 	}
+
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("building chain");
@@ -545,68 +496,110 @@ int MAIN(int argc, char **argv)
 		    /* Exclude verified certificate */
 		    for (i = 1; i < sk_X509_num (chain2) ; i++) 
 			sk_X509_push(certs, sk_X509_value (chain2, i));
-		    /* Free first certificate */
-		    X509_free(sk_X509_value(chain2, 0));
-		    sk_X509_free(chain2);
-		} else {
-			if (vret >= 0)
-				BIO_printf (bio_err, "Error %s getting chain.\n",
+		}
+		sk_X509_free(chain2);
+		if (vret) {
+			BIO_printf (bio_err, "Error %s getting chain.\n",
 					X509_verify_cert_error_string(vret));
-			else
-				ERR_print_errors(bio_err);
 			goto export_end;
 		}			
     	}
 
-	/* Add any CA names */
+#ifdef CRYPTO_MDEBUG
+	CRYPTO_pop_info();
+	CRYPTO_push_info("building bags");
+#endif
 
-	for (i = 0; i < sk_num(canames); i++)
-		{
-		catmp = (unsigned char *)sk_value(canames, i);
-		X509_alias_set1(sk_X509_value(certs, i), catmp, -1);
-		}
-
-	if (csp_name && key)
-		EVP_PKEY_add1_attr_by_NID(key, NID_ms_csp_name,
-				MBSTRING_ASC, (unsigned char *)csp_name, -1);
-		
+	/* We now have loads of certificates: include them all */
+	for(i = 0; i < sk_X509_num(certs); i++) {
+		X509 *cert = NULL;
+		cert = sk_X509_value(certs, i);
+		bag = M_PKCS12_x5092certbag(cert);
+		/* If it matches private key set id */
+		if(cert == ucert) {
+			if(name) PKCS12_add_friendlyname(bag, name, -1);
+			PKCS12_add_localkeyid(bag, keyid, keyidlen);
+		} else if((catmp = sk_shift(canames))) 
+				PKCS12_add_friendlyname(bag, catmp, -1);
+		sk_PKCS12_SAFEBAG_push(bags, bag);
+	}
+	sk_X509_pop_free(certs, X509_free);
+	certs = NULL;
+	/* ucert is part of certs so it is already freed */
+	ucert = NULL;
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
-	CRYPTO_push_info("reading password");
+	CRYPTO_push_info("encrypting bags");
 #endif
 
 	if(!noprompt &&
-		EVP_read_pw_string(pass, sizeof pass, "Enter Export Password:", 1))
-		{
-	    	BIO_printf (bio_err, "Can't read Password\n");
-	    	goto export_end;
-        	}
-	if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
+		EVP_read_pw_string(pass, 50, "Enter Export Password:", 1)) {
+	    BIO_printf (bio_err, "Can't read Password\n");
+	    goto export_end;
+        }
+	if (!twopass) strcpy(macpass, pass);
+	/* Turn certbags into encrypted authsafe */
+	authsafe = PKCS12_pack_p7encdata(cert_pbe, cpass, -1, NULL, 0,
+								 iter, bags);
+	sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
+	bags = NULL;
+
+	if (!authsafe) {
+		ERR_print_errors (bio_err);
+		goto export_end;
+	}
+
+	safes = sk_PKCS7_new_null ();
+	sk_PKCS7_push (safes, authsafe);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
-	CRYPTO_push_info("creating PKCS#12 structure");
+	CRYPTO_push_info("building shrouded key bag");
 #endif
 
-	p12 = PKCS12_create(cpass, name, key, ucert, certs,
-				key_pbe, cert_pbe, iter, -1, keytype);
+	/* Make a shrouded key bag */
+	p8 = EVP_PKEY2PKCS8 (key);
+	if(keytype) PKCS8_add_keyusage(p8, keytype);
+	bag = PKCS12_MAKE_SHKEYBAG(key_pbe, cpass, -1, NULL, 0, iter, p8);
+	PKCS8_PRIV_KEY_INFO_free(p8);
+	p8 = NULL;
+        if (name) PKCS12_add_friendlyname (bag, name, -1);
+	PKCS12_add_localkeyid (bag, keyid, keyidlen);
+	bags = sk_PKCS12_SAFEBAG_new_null();
+	sk_PKCS12_SAFEBAG_push (bags, bag);
 
-	if (!p12)
-		{
-	    	ERR_print_errors (bio_err);
-		goto export_end;
-		}
+#ifdef CRYPTO_MDEBUG
+	CRYPTO_pop_info();
+	CRYPTO_push_info("encrypting shrouded key bag");
+#endif
 
-	if (maciter != -1)
-		PKCS12_set_mac(p12, mpass, -1, NULL, 0, maciter, NULL);
+	/* Turn it into unencrypted safe bag */
+	authsafe = PKCS12_pack_p7data (bags);
+	sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
+	bags = NULL;
+	sk_PKCS7_push (safes, authsafe);
+
+#ifdef CRYPTO_MDEBUG
+	CRYPTO_pop_info();
+	CRYPTO_push_info("building pkcs12");
+#endif
+
+	p12 = PKCS12_init (NID_pkcs7_data);
+
+	M_PKCS12_pack_authsafes (p12, safes);
+
+	sk_PKCS7_pop_free(safes, PKCS7_free);
+	safes = NULL;
+
+	PKCS12_set_mac (p12, mpass, -1, NULL, 0, maciter, NULL);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("writing pkcs12");
 #endif
 
-	i2d_PKCS12_bio(out, p12);
+	i2d_PKCS12_bio (out, p12);
 
 	ret = 0;
 
@@ -619,6 +612,8 @@ int MAIN(int argc, char **argv)
 
 	if (key) EVP_PKEY_free(key);
 	if (certs) sk_X509_pop_free(certs, X509_free);
+	if (safes) sk_PKCS7_pop_free(safes, PKCS7_free);
+	if (bags) sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
 	if (ucert) X509_free(ucert);
 
 #ifdef CRYPTO_MDEBUG
@@ -636,7 +631,7 @@ int MAIN(int argc, char **argv)
 #ifdef CRYPTO_MDEBUG
     CRYPTO_push_info("read import password");
 #endif
-    if(!noprompt && EVP_read_pw_string(pass, sizeof pass, "Enter Import Password:", 0)) {
+    if(!noprompt && EVP_read_pw_string(pass, 50, "Enter Import Password:", 0)) {
 	BIO_printf (bio_err, "Can't read Password\n");
 	goto end;
     }
@@ -644,7 +639,7 @@ int MAIN(int argc, char **argv)
     CRYPTO_pop_info();
 #endif
 
-    if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
+    if (!twopass) strcpy(macpass, pass);
 
     if (options & INFO) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
     if(macver) {
@@ -652,7 +647,7 @@ int MAIN(int argc, char **argv)
     CRYPTO_push_info("verify MAC");
 #endif
 	/* If we enter empty password try no password first */
-	if(!mpass[0] && PKCS12_verify_mac(p12, NULL, 0)) {
+	if(!macpass[0] && PKCS12_verify_mac(p12, NULL, 0)) {
 		/* If mac and crypto pass the same set it to NULL too */
 		if(!twopass) cpass = NULL;
 	} else if (!PKCS12_verify_mac(p12, mpass, -1)) {
@@ -685,54 +680,46 @@ int MAIN(int argc, char **argv)
     CRYPTO_remove_all_info();
 #endif
     BIO_free(in);
-    BIO_free_all(out);
+    BIO_free(out);
     if (canames) sk_free(canames);
     if(passin) OPENSSL_free(passin);
     if(passout) OPENSSL_free(passout);
-    apps_shutdown();
-    OPENSSL_EXIT(ret);
+    EXIT(ret);
 }
 
 int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
 	     int passlen, int options, char *pempass)
 {
-	STACK_OF(PKCS7) *asafes = NULL;
+	STACK_OF(PKCS7) *asafes;
 	STACK_OF(PKCS12_SAFEBAG) *bags;
 	int i, bagnid;
-	int ret = 0;
 	PKCS7 *p7;
 
-	if (!( asafes = PKCS12_unpack_authsafes(p12))) return 0;
+	if (!( asafes = M_PKCS12_unpack_authsafes (p12))) return 0;
 	for (i = 0; i < sk_PKCS7_num (asafes); i++) {
 		p7 = sk_PKCS7_value (asafes, i);
 		bagnid = OBJ_obj2nid (p7->type);
 		if (bagnid == NID_pkcs7_data) {
-			bags = PKCS12_unpack_p7data(p7);
+			bags = M_PKCS12_unpack_p7data (p7);
 			if (options & INFO) BIO_printf (bio_err, "PKCS7 Data\n");
 		} else if (bagnid == NID_pkcs7_encrypted) {
 			if (options & INFO) {
-				BIO_printf(bio_err, "PKCS7 Encrypted data: ");
-				alg_print(bio_err, 
+				BIO_printf (bio_err, "PKCS7 Encrypted data: ");
+				alg_print (bio_err, 
 					p7->d.encrypted->enc_data->algorithm);
 			}
-			bags = PKCS12_unpack_p7encdata(p7, pass, passlen);
+			bags = M_PKCS12_unpack_p7encdata (p7, pass, passlen);
 		} else continue;
-		if (!bags) goto err;
+		if (!bags) return 0;
 	    	if (!dump_certs_pkeys_bags (out, bags, pass, passlen, 
 						 options, pempass)) {
 			sk_PKCS12_SAFEBAG_pop_free (bags, PKCS12_SAFEBAG_free);
-			goto err;
+			return 0;
 		}
 		sk_PKCS12_SAFEBAG_pop_free (bags, PKCS12_SAFEBAG_free);
-		bags = NULL;
 	}
-	ret = 1;
-
-	err:
-
-	if (asafes)
-		sk_PKCS7_pop_free (asafes, PKCS7_free);
-	return ret;
+	sk_PKCS7_pop_free (asafes, PKCS7_free);
+	return 1;
 }
 
 int dump_certs_pkeys_bags (BIO *out, STACK_OF(PKCS12_SAFEBAG) *bags,
@@ -776,12 +763,9 @@ int dump_certs_pkeys_bag (BIO *out, PKCS12_SAFEBAG *bag, char *pass,
 		}
 		if (options & NOKEYS) return 1;
 		print_attribs (out, bag->attrib, "Bag Attributes");
-		if (!(p8 = PKCS12_decrypt_skey(bag, pass, passlen)))
+		if (!(p8 = M_PKCS12_decrypt_skey (bag, pass, passlen)))
 				return 0;
-		if (!(pkey = EVP_PKCS82PKEY (p8))) {
-			PKCS8_PRIV_KEY_INFO_free(p8);
-			return 0;
-		}
+		if (!(pkey = EVP_PKCS82PKEY (p8))) return 0;
 		print_attribs (out, p8->attributes, "Key Attributes");
 		PKCS8_PRIV_KEY_INFO_free(p8);
 		PEM_write_bio_PrivateKey (out, pkey, enc, NULL, 0, NULL, pempass);
@@ -797,7 +781,7 @@ int dump_certs_pkeys_bag (BIO *out, PKCS12_SAFEBAG *bag, char *pass,
 		print_attribs (out, bag->attrib, "Bag Attributes");
 		if (M_PKCS12_cert_bag_type(bag) != NID_x509Certificate )
 								 return 1;
-		if (!(x509 = PKCS12_certbag2x509(bag))) return 0;
+		if (!(x509 = M_PKCS12_certbag2x509(bag))) return 0;
 		dump_cert_text (out, x509);
 		PEM_write_bio_X509 (out, x509);
 		X509_free(x509);
@@ -827,25 +811,18 @@ int get_cert_chain (X509 *cert, X509_STORE *store, STACK_OF(X509) **chain)
 {
 	X509_STORE_CTX store_ctx;
 	STACK_OF(X509) *chn;
-	int i = 0;
+	int i;
 
-	/* FIXME: Should really check the return status of X509_STORE_CTX_init
-	 * for an error, but how that fits into the return value of this
-	 * function is less obvious. */
 	X509_STORE_CTX_init(&store_ctx, store, cert, NULL);
 	if (X509_verify_cert(&store_ctx) <= 0) {
 		i = X509_STORE_CTX_get_error (&store_ctx);
-		if (i == 0)
-			/* avoid returning 0 if X509_verify_cert() did not
-			 * set an appropriate error value in the context */
-			i = -1;
-		chn = NULL;
 		goto err;
-	} else
-		chn = X509_STORE_CTX_get1_chain(&store_ctx);
+	}
+	chn =  X509_STORE_CTX_get1_chain(&store_ctx);
+	i = 0;
+	*chain = chn;
 err:
 	X509_STORE_CTX_cleanup(&store_ctx);
-	*chain = chn;
 	
 	return i;
 }	
@@ -853,16 +830,13 @@ err:
 int alg_print (BIO *x, X509_ALGOR *alg)
 {
 	PBEPARAM *pbe;
-	const unsigned char *p;
+	unsigned char *p;
 	p = alg->parameter->value.sequence->data;
-	pbe = d2i_PBEPARAM(NULL, &p, alg->parameter->value.sequence->length);
-	if (!pbe)
-		return 1;
-	BIO_printf (bio_err, "%s, Iteration %ld\n", 
-		OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)),
-		ASN1_INTEGER_get(pbe->iter));
+	pbe = d2i_PBEPARAM (NULL, &p, alg->parameter->value.sequence->length);
+	BIO_printf (bio_err, "%s, Iteration %d\n", 
+	OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)), ASN1_INTEGER_get(pbe->iter));
 	PBEPARAM_free (pbe);
-	return 1;
+	return 0;
 }
 
 /* Load all certificates from a given file */
@@ -894,7 +868,7 @@ int cert_load(BIO *in, STACK_OF(X509) *sk)
 
 /* Generalised attribute print: handle PKCS#8 and bag attributes */
 
-int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name)
+int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst, char *name)
 {
 	X509_ATTRIBUTE *attr;
 	ASN1_TYPE *av;
@@ -929,14 +903,14 @@ int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name)
 				break;
 
 				case V_ASN1_OCTET_STRING:
-				hex_prin(out, av->value.octet_string->data,
-					av->value.octet_string->length);
+				hex_prin(out, av->value.bit_string->data,
+					av->value.bit_string->length);
 				BIO_printf(out, "\n");	
 				break;
 
 				case V_ASN1_BIT_STRING:
-				hex_prin(out, av->value.bit_string->data,
-					av->value.bit_string->length);
+				hex_prin(out, av->value.octet_string->data,
+					av->value.octet_string->length);
 				BIO_printf(out, "\n");	
 				break;
 

apps/pkcs7.c

@@ -67,6 +67,7 @@
 #include <openssl/x509.h>
 #include <openssl/pkcs7.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	pkcs7_main
@@ -82,19 +83,15 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat;
 	char *infile,*outfile,*prog;
 	int print_certs=0,text=0,noout=0;
-	int ret=1;
-#ifndef OPENSSL_NO_ENGINE
+	int ret=0;
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
@@ -102,9 +99,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -141,13 +135,11 @@ int MAIN(int argc, char **argv)
 			text=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -170,18 +162,29 @@ bad:
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
-		ret = 1;
-		goto end;
+		EXIT(1);
 		}
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -220,15 +223,7 @@ bad:
 		}
 
 	if (outfile == NULL)
-		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -312,7 +307,6 @@ bad:
 end:
 	if (p7 != NULL) PKCS7_free(p7);
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free_all(out);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	if (out != NULL) BIO_free(out);
+	EXIT(ret);
 	}

apps/pkcs8.c

@@ -1,6 +1,6 @@
 /* pkcs8.c */
 /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999-2004.
+ * project 1999.
  */
 /* ====================================================================
  * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
@@ -62,13 +62,15 @@
 #include <openssl/err.h>
 #include <openssl/evp.h>
 #include <openssl/pkcs12.h>
+#include <openssl/engine.h>
 
+#include "apps.h"
 #define PROG pkcs8_main
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
-	{
+{
 	ENGINE *e = NULL;
 	char **args, *infile = NULL, *outfile = NULL;
 	char *passargin = NULL, *passargout = NULL;
@@ -82,88 +84,56 @@ int MAIN(int argc, char **argv)
 	int nocrypt = 0;
 	X509_SIG *p8;
 	PKCS8_PRIV_KEY_INFO *p8inf;
-	EVP_PKEY *pkey=NULL;
+	EVP_PKEY *pkey;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
 
 	ERR_load_crypto_strings();
 	OpenSSL_add_all_algorithms();
 	args = argv + 1;
-	while (!badarg && *args && *args[0] == '-')
-		{
-		if (!strcmp(*args,"-v2"))
-			{
-			if (args[1])
-				{
+	while (!badarg && *args && *args[0] == '-') {
+		if (!strcmp(*args,"-v2")) {
+			if (args[1]) {
 				args++;
 				cipher=EVP_get_cipherbyname(*args);
-				if (!cipher)
-					{
+				if(!cipher) {
 					BIO_printf(bio_err,
 						 "Unknown cipher %s\n", *args);
 					badarg = 1;
-					}
 				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp(*args,"-v1"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp(*args,"-v1")) {
+			if (args[1]) {
 				args++;
 				pbe_nid=OBJ_txt2nid(*args);
-				if (pbe_nid == NID_undef)
-					{
+				if(pbe_nid == NID_undef) {
 					BIO_printf(bio_err,
 						 "Unknown PBE algorithm %s\n", *args);
 					badarg = 1;
-					}
 				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp(*args,"-inform"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp(*args,"-inform")) {
+			if (args[1]) {
 				args++;
 				informat=str2fmt(*args);
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp(*args,"-outform"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp(*args,"-outform")) {
+			if (args[1]) {
 				args++;
 				outformat=str2fmt(*args);
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp (*args, "-topk8"))
-			topk8 = 1;
-		else if (!strcmp (*args, "-noiter"))
-			iter = 1;
-		else if (!strcmp (*args, "-nocrypt"))
-			nocrypt = 1;
-		else if (!strcmp (*args, "-nooct"))
-			p8_broken = PKCS8_NO_OCTET;
-		else if (!strcmp (*args, "-nsdb"))
-			p8_broken = PKCS8_NS_DB;
-		else if (!strcmp (*args, "-embed"))
-			p8_broken = PKCS8_EMBEDDED_PARAM;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-topk8")) topk8 = 1;
+		else if (!strcmp (*args, "-noiter")) iter = 1;
+		else if (!strcmp (*args, "-nocrypt")) nocrypt = 1;
+		else if (!strcmp (*args, "-nooct")) p8_broken = PKCS8_NO_OCTET;
+		else if (!strcmp (*args, "-nsdb")) p8_broken = PKCS8_NS_DB;
+		else if (!strcmp (*args, "-embed")) p8_broken = PKCS8_EMBEDDED_PARAM;
 		else if (!strcmp(*args,"-passin"))
 			{
 			if (!args[1]) goto bad;
@@ -174,37 +144,26 @@ int MAIN(int argc, char **argv)
 			if (!args[1]) goto bad;
 			passargout= *(++args);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*args,"-engine") == 0)
 			{
 			if (!args[1]) goto bad;
 			engine= *(++args);
 			}
-#endif
-		else if (!strcmp (*args, "-in"))
-			{
-			if (args[1])
-				{
+		else if (!strcmp (*args, "-in")) {
+			if (args[1]) {
 				args++;
 				infile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp (*args, "-out"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-out")) {
+			if (args[1]) {
 				args++;
 				outfile = *args;
-				}
-			else badarg = 1;
-			}
-		else badarg = 1;
+			} else badarg = 1;
+		} else badarg = 1;
 		args++;
-		}
+	}
 
-	if (badarg)
-		{
+	if (badarg) {
 		bad:
 		BIO_printf(bio_err, "Usage pkcs8 [options]\n");
 		BIO_printf(bio_err, "where options are\n");
@@ -222,202 +181,162 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-nocrypt        use or expect unencrypted private key\n");
 		BIO_printf(bio_err, "-v2 alg         use PKCS#5 v2.0 and cipher \"alg\"\n");
 		BIO_printf(bio_err, "-v1 obj         use PKCS#5 v1.5 and cipher \"alg\"\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
-		return 1;
-		}
+		return (1);
+	}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
-
-	if (!app_passwd(bio_err, passargin, passargout, &passin, &passout))
+	if (engine != NULL)
 		{
-		BIO_printf(bio_err, "Error getting passwords\n");
-		return 1;
-		}
-
-	if ((pbe_nid == -1) && !cipher)
-		pbe_nid = NID_pbeWithMD5AndDES_CBC;
-
-	if (infile)
-		{
-		if (!(in = BIO_new_file(infile, "rb")))
+		if((e = ENGINE_by_id(engine)) == NULL)
 			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			return (1);
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			return (1);
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
+	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
+		BIO_printf(bio_err, "Error getting passwords\n");
+		return (1);
+	}
+
+	if ((pbe_nid == -1) && !cipher) pbe_nid = NID_pbeWithMD5AndDES_CBC;
+
+	if (infile) {
+		if (!(in = BIO_new_file(infile, "rb"))) {
 			BIO_printf(bio_err,
 				 "Can't open input file %s\n", infile);
 			return (1);
-			}
 		}
-	else
-		in = BIO_new_fp (stdin, BIO_NOCLOSE);
+	} else in = BIO_new_fp (stdin, BIO_NOCLOSE);
 
-	if (outfile)
-		{
-		if (!(out = BIO_new_file (outfile, "wb")))
-			{
+	if (outfile) {
+		if (!(out = BIO_new_file (outfile, "wb"))) {
 			BIO_printf(bio_err,
 				 "Can't open output file %s\n", outfile);
 			return (1);
-			}
 		}
-	else
-		{
-		out = BIO_new_fp (stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
+	} else out = BIO_new_fp (stdout, BIO_NOCLOSE);
+
+	if (topk8) {
+		if(informat == FORMAT_PEM)
+			pkey = PEM_read_bio_PrivateKey(in, NULL, NULL, passin);
+		else if(informat == FORMAT_ASN1)
+			pkey = d2i_PrivateKey_bio(in, NULL);
+		else {
+			BIO_printf(bio_err, "Bad format specified for key\n");
+			return (1);
 		}
-	if (topk8)
-		{
-		BIO_free(in); /* Not needed in this section */
-		pkey = load_key(bio_err, infile, informat, 1,
-			passin, e, "key");
-		if (!pkey)
-			{
-			BIO_free_all(out);
-			return 1;
-			}
-		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken)))
-			{
-			BIO_printf(bio_err, "Error converting key\n");
+		if (!pkey) {
+			BIO_printf(bio_err, "Error reading key\n", outfile);
 			ERR_print_errors(bio_err);
-			EVP_PKEY_free(pkey);
-			BIO_free_all(out);
-			return 1;
-			}
-		if (nocrypt)
-			{
-			if (outformat == FORMAT_PEM) 
+			return (1);
+		}
+		BIO_free(in);
+		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken))) {
+			BIO_printf(bio_err, "Error converting key\n", outfile);
+			ERR_print_errors(bio_err);
+			return (1);
+		}
+		if(nocrypt) {
+			if(outformat == FORMAT_PEM) 
 				PEM_write_bio_PKCS8_PRIV_KEY_INFO(out, p8inf);
-			else if (outformat == FORMAT_ASN1)
+			else if(outformat == FORMAT_ASN1)
 				i2d_PKCS8_PRIV_KEY_INFO_bio(out, p8inf);
-			else
-				{
+			else {
 				BIO_printf(bio_err, "Bad format specified for key\n");
-				PKCS8_PRIV_KEY_INFO_free(p8inf);
-				EVP_PKEY_free(pkey);
-				BIO_free_all(out);
 				return (1);
-				}
 			}
-		else
-			{
-			if (passout)
-				p8pass = passout;
-			else
-				{
+		} else {
+			if(passout) p8pass = passout;
+			else {
 				p8pass = pass;
-				if (EVP_read_pw_string(pass, sizeof pass, "Enter Encryption Password:", 1))
-					{
-					PKCS8_PRIV_KEY_INFO_free(p8inf);
-					EVP_PKEY_free(pkey);
-					BIO_free_all(out);
-					return (1);
-					}
-				}
+				EVP_read_pw_string(pass, 50, "Enter Encryption Password:", 1);
+			}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,
 					p8pass, strlen(p8pass),
-					NULL, 0, iter, p8inf)))
-				{
-				BIO_printf(bio_err, "Error encrypting key\n");
+					NULL, 0, iter, p8inf))) {
+				BIO_printf(bio_err, "Error encrypting key\n",
+								 outfile);
 				ERR_print_errors(bio_err);
-				PKCS8_PRIV_KEY_INFO_free(p8inf);
-				EVP_PKEY_free(pkey);
-				BIO_free_all(out);
 				return (1);
-				}
-			app_RAND_write_file(NULL, bio_err);
-			if (outformat == FORMAT_PEM) 
-				PEM_write_bio_PKCS8(out, p8);
-			else if (outformat == FORMAT_ASN1)
-				i2d_PKCS8_bio(out, p8);
-			else
-				{
-				BIO_printf(bio_err, "Bad format specified for key\n");
-				PKCS8_PRIV_KEY_INFO_free(p8inf);
-				EVP_PKEY_free(pkey);
-				BIO_free_all(out);
-				return (1);
-				}
-			X509_SIG_free(p8);
 			}
-
+			app_RAND_write_file(NULL, bio_err);
+			if(outformat == FORMAT_PEM) 
+				PEM_write_bio_PKCS8(out, p8);
+			else if(outformat == FORMAT_ASN1)
+				i2d_PKCS8_bio(out, p8);
+			else {
+				BIO_printf(bio_err, "Bad format specified for key\n");
+				return (1);
+			}
+			X509_SIG_free(p8);
+		}
 		PKCS8_PRIV_KEY_INFO_free (p8inf);
 		EVP_PKEY_free(pkey);
-		BIO_free_all(out);
-		if (passin)
-			OPENSSL_free(passin);
-		if (passout)
-			OPENSSL_free(passout);
+		BIO_free(out);
+		if(passin) OPENSSL_free(passin);
+		if(passout) OPENSSL_free(passout);
 		return (0);
-		}
+	}
 
-	if (nocrypt)
-		{
-		if (informat == FORMAT_PEM) 
+	if(nocrypt) {
+		if(informat == FORMAT_PEM) 
 			p8inf = PEM_read_bio_PKCS8_PRIV_KEY_INFO(in,NULL,NULL, NULL);
-		else if (informat == FORMAT_ASN1)
+		else if(informat == FORMAT_ASN1)
 			p8inf = d2i_PKCS8_PRIV_KEY_INFO_bio(in, NULL);
-		else
-			{
+		else {
 			BIO_printf(bio_err, "Bad format specified for key\n");
 			return (1);
-			}
 		}
-	else
-		{
-		if (informat == FORMAT_PEM) 
+	} else {
+		if(informat == FORMAT_PEM) 
 			p8 = PEM_read_bio_PKCS8(in, NULL, NULL, NULL);
-		else if (informat == FORMAT_ASN1)
+		else if(informat == FORMAT_ASN1)
 			p8 = d2i_PKCS8_bio(in, NULL);
-		else
-			{
+		else {
 			BIO_printf(bio_err, "Bad format specified for key\n");
 			return (1);
-			}
+		}
 
-		if (!p8)
-			{
-			BIO_printf (bio_err, "Error reading key\n");
+		if (!p8) {
+			BIO_printf (bio_err, "Error reading key\n", outfile);
 			ERR_print_errors(bio_err);
 			return (1);
-			}
-		if (passin)
-			p8pass = passin;
-		else
-			{
+		}
+		if(passin) p8pass = passin;
+		else {
 			p8pass = pass;
-			EVP_read_pw_string(pass, sizeof pass, "Enter Password:", 0);
-			}
-		p8inf = PKCS8_decrypt(p8, p8pass, strlen(p8pass));
+			EVP_read_pw_string(pass, 50, "Enter Password:", 0);
+		}
+		p8inf = M_PKCS8_decrypt(p8, p8pass, strlen(p8pass));
 		X509_SIG_free(p8);
-		}
+	}
 
-	if (!p8inf)
-		{
-		BIO_printf(bio_err, "Error decrypting key\n");
+	if (!p8inf) {
+		BIO_printf(bio_err, "Error decrypting key\n", outfile);
 		ERR_print_errors(bio_err);
 		return (1);
-		}
+	}
 
-	if (!(pkey = EVP_PKCS82PKEY(p8inf)))
-		{
-		BIO_printf(bio_err, "Error converting key\n");
+	if (!(pkey = EVP_PKCS82PKEY(p8inf))) {
+		BIO_printf(bio_err, "Error converting key\n", outfile);
 		ERR_print_errors(bio_err);
 		return (1);
-		}
+	}
 	
-	if (p8inf->broken)
-		{
+	if (p8inf->broken) {
 		BIO_printf(bio_err, "Warning: broken key encoding: ");
-		switch (p8inf->broken)
-			{
+		switch (p8inf->broken) {
 			case PKCS8_NO_OCTET:
 			BIO_printf(bio_err, "No Octet String in PrivateKey\n");
 			break;
@@ -437,24 +356,20 @@ int MAIN(int argc, char **argv)
 	}
 	
 	PKCS8_PRIV_KEY_INFO_free(p8inf);
-	if (outformat == FORMAT_PEM) 
+	if(outformat == FORMAT_PEM) 
 		PEM_write_bio_PrivateKey(out, pkey, NULL, NULL, 0, NULL, passout);
-	else if (outformat == FORMAT_ASN1)
+	else if(outformat == FORMAT_ASN1)
 		i2d_PrivateKey_bio(out, pkey);
-	else
-		{
+	else {
 		BIO_printf(bio_err, "Bad format specified for key\n");
 			return (1);
-		}
+	}
 
-	end:
 	EVP_PKEY_free(pkey);
-	BIO_free_all(out);
+	BIO_free(out);
 	BIO_free(in);
-	if (passin)
-		OPENSSL_free(passin);
-	if (passout)
-		OPENSSL_free(passout);
+	if(passin) OPENSSL_free(passin);
+	if(passout) OPENSSL_free(passout);
 
 	return (0);
-	}
+}

apps/prime.c

@@ -1,130 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#include <string.h>
-
-#include "apps.h"
-#include <openssl/bn.h>
-
-
-#undef PROG
-#define PROG prime_main
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-    {
-    int hex=0;
-    int checks=20;
-    BIGNUM *bn=NULL;
-    BIO *bio_out;
-
-    apps_startup();
-
-    if (bio_err == NULL)
-	if ((bio_err=BIO_new(BIO_s_file())) != NULL)
-	    BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
-
-    --argc;
-    ++argv;
-    while (argc >= 1 && **argv == '-')
-	{
-	if(!strcmp(*argv,"-hex"))
-	    hex=1;
-	else if(!strcmp(*argv,"-checks"))
-	    if(--argc < 1)
-		goto bad;
-	    else
-		checks=atoi(*++argv);
-	else
-	    {
-	    BIO_printf(bio_err,"Unknown option '%s'\n",*argv);
-	    goto bad;
-	    }
-	--argc;
-	++argv;
-	}
-
-    if (argv[0] == NULL)
-	{
-	BIO_printf(bio_err,"No prime specified\n");
-	goto bad;
-	}
-
-   if ((bio_out=BIO_new(BIO_s_file())) != NULL)
-	{
-	BIO_set_fp(bio_out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-	    {
-	    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-	    bio_out = BIO_push(tmpbio, bio_out);
-	    }
-#endif
-	}
-
-    if(hex)
-	BN_hex2bn(&bn,argv[0]);
-    else
-	BN_dec2bn(&bn,argv[0]);
-
-    BN_print(bio_out,bn);
-    BIO_printf(bio_out," is %sprime\n",
-	       BN_is_prime_ex(bn,checks,NULL,NULL) ? "" : "not ");
-
-    BN_free(bn);
-    BIO_free_all(bio_out);
-
-    return 0;
-
-    bad:
-    BIO_printf(bio_err,"options are\n");
-    BIO_printf(bio_err,"%-14s hex\n","-hex");
-    BIO_printf(bio_err,"%-14s number of checks\n","-checks <n>");
-    return 1;
-    }

apps/progs.h

@@ -17,8 +17,6 @@ extern int rsa_main(int argc,char *argv[]);
 extern int rsautl_main(int argc,char *argv[]);
 extern int dsa_main(int argc,char *argv[]);
 extern int dsaparam_main(int argc,char *argv[]);
-extern int ec_main(int argc,char *argv[]);
-extern int ecparam_main(int argc,char *argv[]);
 extern int x509_main(int argc,char *argv[]);
 extern int genrsa_main(int argc,char *argv[]);
 extern int gendsa_main(int argc,char *argv[]);
@@ -37,9 +35,6 @@ extern int pkcs8_main(int argc,char *argv[]);
 extern int spkac_main(int argc,char *argv[]);
 extern int smime_main(int argc,char *argv[]);
 extern int rand_main(int argc,char *argv[]);
-extern int engine_main(int argc,char *argv[]);
-extern int ocsp_main(int argc,char *argv[]);
-extern int prime_main(int argc,char *argv[]);
 
 #define FUNC_TYPE_GENERAL	1
 #define FUNC_TYPE_MD		2
@@ -47,8 +42,8 @@ extern int prime_main(int argc,char *argv[]);
 
 typedef struct {
 	int type;
-	const char *name;
-	int (*func)(int argc,char *argv[]);
+	char *name;
+	int (*func)();
 	} FUNCTION;
 
 FUNCTION functions[] = {
@@ -56,283 +51,205 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"asn1parse",asn1parse_main},
 	{FUNC_TYPE_GENERAL,"req",req_main},
 	{FUNC_TYPE_GENERAL,"dgst",dgst_main},
-#ifndef OPENSSL_NO_DH
+#ifndef NO_DH
 	{FUNC_TYPE_GENERAL,"dh",dh_main},
 #endif
-#ifndef OPENSSL_NO_DH
+#ifndef NO_DH
 	{FUNC_TYPE_GENERAL,"dhparam",dhparam_main},
 #endif
 	{FUNC_TYPE_GENERAL,"enc",enc_main},
 	{FUNC_TYPE_GENERAL,"passwd",passwd_main},
-#ifndef OPENSSL_NO_DH
+#ifndef NO_DH
 	{FUNC_TYPE_GENERAL,"gendh",gendh_main},
 #endif
 	{FUNC_TYPE_GENERAL,"errstr",errstr_main},
 	{FUNC_TYPE_GENERAL,"ca",ca_main},
 	{FUNC_TYPE_GENERAL,"crl",crl_main},
-#ifndef OPENSSL_NO_RSA
+#ifndef NO_RSA
 	{FUNC_TYPE_GENERAL,"rsa",rsa_main},
 #endif
-#ifndef OPENSSL_NO_RSA
+#ifndef NO_RSA
 	{FUNC_TYPE_GENERAL,"rsautl",rsautl_main},
 #endif
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 	{FUNC_TYPE_GENERAL,"dsa",dsa_main},
 #endif
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 	{FUNC_TYPE_GENERAL,"dsaparam",dsaparam_main},
-#endif
-#ifndef OPENSSL_NO_EC
-	{FUNC_TYPE_GENERAL,"ec",ec_main},
-#endif
-#ifndef OPENSSL_NO_EC
-	{FUNC_TYPE_GENERAL,"ecparam",ecparam_main},
 #endif
 	{FUNC_TYPE_GENERAL,"x509",x509_main},
-#ifndef OPENSSL_NO_RSA
+#ifndef NO_RSA
 	{FUNC_TYPE_GENERAL,"genrsa",genrsa_main},
 #endif
-#ifndef OPENSSL_NO_DSA
+#ifndef NO_DSA
 	{FUNC_TYPE_GENERAL,"gendsa",gendsa_main},
 #endif
-#if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
+#if !defined(NO_SOCK) && !(defined(NO_SSL2) && defined(NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_server",s_server_main},
 #endif
-#if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
+#if !defined(NO_SOCK) && !(defined(NO_SSL2) && defined(NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_client",s_client_main},
 #endif
-#ifndef OPENSSL_NO_SPEED
 	{FUNC_TYPE_GENERAL,"speed",speed_main},
-#endif
-#if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
+#if !defined(NO_SOCK) && !(defined(NO_SSL2) && defined(NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_time",s_time_main},
 #endif
 	{FUNC_TYPE_GENERAL,"version",version_main},
 	{FUNC_TYPE_GENERAL,"pkcs7",pkcs7_main},
 	{FUNC_TYPE_GENERAL,"crl2pkcs7",crl2pkcs7_main},
 	{FUNC_TYPE_GENERAL,"sess_id",sess_id_main},
-#if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
+#if !defined(NO_SOCK) && !(defined(NO_SSL2) && defined(NO_SSL3))
 	{FUNC_TYPE_GENERAL,"ciphers",ciphers_main},
 #endif
 	{FUNC_TYPE_GENERAL,"nseq",nseq_main},
-#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
+#if !defined(NO_DES) && !defined(NO_SHA1)
 	{FUNC_TYPE_GENERAL,"pkcs12",pkcs12_main},
 #endif
 	{FUNC_TYPE_GENERAL,"pkcs8",pkcs8_main},
 	{FUNC_TYPE_GENERAL,"spkac",spkac_main},
 	{FUNC_TYPE_GENERAL,"smime",smime_main},
 	{FUNC_TYPE_GENERAL,"rand",rand_main},
-#ifndef OPENSSL_NO_ENGINE
-	{FUNC_TYPE_GENERAL,"engine",engine_main},
-#endif
-	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
-	{FUNC_TYPE_GENERAL,"prime",prime_main},
-#ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},
-#endif
-#ifndef OPENSSL_NO_MD4
 	{FUNC_TYPE_MD,"md4",dgst_main},
-#endif
-#ifndef OPENSSL_NO_MD5
 	{FUNC_TYPE_MD,"md5",dgst_main},
-#endif
-#ifndef OPENSSL_NO_SHA
 	{FUNC_TYPE_MD,"sha",dgst_main},
-#endif
-#ifndef OPENSSL_NO_SHA1
 	{FUNC_TYPE_MD,"sha1",dgst_main},
-#endif
-#ifndef OPENSSL_NO_MDC2
 	{FUNC_TYPE_MD,"mdc2",dgst_main},
-#endif
-#ifndef OPENSSL_NO_RMD160
 	{FUNC_TYPE_MD,"rmd160",dgst_main},
-#endif
-#ifndef OPENSSL_NO_AES
-	{FUNC_TYPE_CIPHER,"aes-128-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_AES
-	{FUNC_TYPE_CIPHER,"aes-128-ecb",enc_main},
-#endif
-#ifndef OPENSSL_NO_AES
-	{FUNC_TYPE_CIPHER,"aes-192-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_AES
-	{FUNC_TYPE_CIPHER,"aes-192-ecb",enc_main},
-#endif
-#ifndef OPENSSL_NO_AES
-	{FUNC_TYPE_CIPHER,"aes-256-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_AES
-	{FUNC_TYPE_CIPHER,"aes-256-ecb",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-128-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-128-ecb",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-192-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-192-ecb",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-256-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-256-ecb",enc_main},
-#endif
 	{FUNC_TYPE_CIPHER,"base64",enc_main},
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des3",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"desx",enc_main},
 #endif
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea",enc_main},
 #endif
-#ifndef OPENSSL_NO_SEED
-	{FUNC_TYPE_CIPHER,"seed",enc_main},
-#endif
-#ifndef OPENSSL_NO_RC4
+#ifndef NO_RC4
 	{FUNC_TYPE_CIPHER,"rc4",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC4
+#ifndef NO_RC4
 	{FUNC_TYPE_CIPHER,"rc4-40",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC2
+#ifndef NO_RC2
 	{FUNC_TYPE_CIPHER,"rc2",enc_main},
 #endif
-#ifndef OPENSSL_NO_BF
+#ifndef NO_BF
 	{FUNC_TYPE_CIPHER,"bf",enc_main},
 #endif
-#ifndef OPENSSL_NO_CAST
+#ifndef NO_CAST
 	{FUNC_TYPE_CIPHER,"cast",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC5
+#ifndef NO_RC5
 	{FUNC_TYPE_CIPHER,"rc5",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-ecb",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-ede",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-ede3",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-ede-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-ede3-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-cfb",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-ede-cfb",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-ede3-cfb",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-ofb",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-ede-ofb",enc_main},
 #endif
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 	{FUNC_TYPE_CIPHER,"des-ede3-ofb",enc_main},
 #endif
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea-ecb",enc_main},
 #endif
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea-cfb",enc_main},
 #endif
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea-ofb",enc_main},
 #endif
-#ifndef OPENSSL_NO_SEED
-	{FUNC_TYPE_CIPHER,"seed-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_SEED
-	{FUNC_TYPE_CIPHER,"seed-ecb",enc_main},
-#endif
-#ifndef OPENSSL_NO_SEED
-	{FUNC_TYPE_CIPHER,"seed-cfb",enc_main},
-#endif
-#ifndef OPENSSL_NO_SEED
-	{FUNC_TYPE_CIPHER,"seed-ofb",enc_main},
-#endif
-#ifndef OPENSSL_NO_RC2
+#ifndef NO_RC2
 	{FUNC_TYPE_CIPHER,"rc2-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC2
+#ifndef NO_RC2
 	{FUNC_TYPE_CIPHER,"rc2-ecb",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC2
+#ifndef NO_RC2
 	{FUNC_TYPE_CIPHER,"rc2-cfb",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC2
+#ifndef NO_RC2
 	{FUNC_TYPE_CIPHER,"rc2-ofb",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC2
+#ifndef NO_RC2
 	{FUNC_TYPE_CIPHER,"rc2-64-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC2
+#ifndef NO_RC2
 	{FUNC_TYPE_CIPHER,"rc2-40-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_BF
+#ifndef NO_BF
 	{FUNC_TYPE_CIPHER,"bf-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_BF
+#ifndef NO_BF
 	{FUNC_TYPE_CIPHER,"bf-ecb",enc_main},
 #endif
-#ifndef OPENSSL_NO_BF
+#ifndef NO_BF
 	{FUNC_TYPE_CIPHER,"bf-cfb",enc_main},
 #endif
-#ifndef OPENSSL_NO_BF
+#ifndef NO_BF
 	{FUNC_TYPE_CIPHER,"bf-ofb",enc_main},
 #endif
-#ifndef OPENSSL_NO_CAST
+#ifndef NO_CAST
 	{FUNC_TYPE_CIPHER,"cast5-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_CAST
+#ifndef NO_CAST
 	{FUNC_TYPE_CIPHER,"cast5-ecb",enc_main},
 #endif
-#ifndef OPENSSL_NO_CAST
+#ifndef NO_CAST
 	{FUNC_TYPE_CIPHER,"cast5-cfb",enc_main},
 #endif
-#ifndef OPENSSL_NO_CAST
+#ifndef NO_CAST
 	{FUNC_TYPE_CIPHER,"cast5-ofb",enc_main},
 #endif
-#ifndef OPENSSL_NO_CAST
+#ifndef NO_CAST
 	{FUNC_TYPE_CIPHER,"cast-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC5
+#ifndef NO_RC5
 	{FUNC_TYPE_CIPHER,"rc5-cbc",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC5
+#ifndef NO_RC5
 	{FUNC_TYPE_CIPHER,"rc5-ecb",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC5
+#ifndef NO_RC5
 	{FUNC_TYPE_CIPHER,"rc5-cfb",enc_main},
 #endif
-#ifndef OPENSSL_NO_RC5
+#ifndef NO_RC5
 	{FUNC_TYPE_CIPHER,"rc5-ofb",enc_main},
 #endif
 	{0,NULL,NULL}

apps/progs.pl

@@ -16,8 +16,8 @@ print <<'EOF';
 
 typedef struct {
 	int type;
-	const char *name;
-	int (*func)(int argc,char *argv[]);
+	char *name;
+	int (*func)();
 	} FUNCTION;
 
 FUNCTION functions[] = {
@@ -28,21 +28,15 @@ foreach (@ARGV)
 	push(@files,$_);
 	$str="\t{FUNC_TYPE_GENERAL,\"$_\",${_}_main},\n";
 	if (($_ =~ /^s_/) || ($_ =~ /^ciphers$/))
-		{ print "#if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))\n${str}#endif\n"; } 
-	elsif ( ($_ =~ /^speed$/))
-		{ print "#ifndef OPENSSL_NO_SPEED\n${str}#endif\n"; }
-	elsif ( ($_ =~ /^engine$/))
-		{ print "#ifndef OPENSSL_NO_ENGINE\n${str}#endif\n"; }
+		{ print "#if !defined(NO_SOCK) && !(defined(NO_SSL2) && defined(NO_SSL3))\n${str}#endif\n"; } 
 	elsif ( ($_ =~ /^rsa$/) || ($_ =~ /^genrsa$/) || ($_ =~ /^rsautl$/)) 
-		{ print "#ifndef OPENSSL_NO_RSA\n${str}#endif\n";  }
+		{ print "#ifndef NO_RSA\n${str}#endif\n";  }
 	elsif ( ($_ =~ /^dsa$/) || ($_ =~ /^gendsa$/) || ($_ =~ /^dsaparam$/))
-		{ print "#ifndef OPENSSL_NO_DSA\n${str}#endif\n"; }
-	elsif ( ($_ =~ /^ec$/) || ($_ =~ /^ecparam$/))
-		{ print "#ifndef OPENSSL_NO_EC\n${str}#endif\n";}
+		{ print "#ifndef NO_DSA\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^dh$/) || ($_ =~ /^gendh$/) || ($_ =~ /^dhparam$/))
-		{ print "#ifndef OPENSSL_NO_DH\n${str}#endif\n"; }
+		{ print "#ifndef NO_DH\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^pkcs12$/))
-		{ print "#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)\n${str}#endif\n"; }
+		{ print "#if !defined(NO_DES) && !defined(NO_SHA1)\n${str}#endif\n"; }
 	else
 		{ print $str; }
 	}
@@ -50,25 +44,18 @@ foreach (@ARGV)
 foreach ("md2","md4","md5","sha","sha1","mdc2","rmd160")
 	{
 	push(@files,$_);
-	printf "#ifndef OPENSSL_NO_".uc($_)."\n\t{FUNC_TYPE_MD,\"".$_."\",dgst_main},\n#endif\n";
+	printf "\t{FUNC_TYPE_MD,\"%s\",dgst_main},\n",$_;
 	}
 
 foreach (
-	"aes-128-cbc", "aes-128-ecb",
-	"aes-192-cbc", "aes-192-ecb",
-	"aes-256-cbc", "aes-256-ecb",
-	"camellia-128-cbc", "camellia-128-ecb",
-	"camellia-192-cbc", "camellia-192-ecb",
-	"camellia-256-cbc", "camellia-256-ecb",
 	"base64",
-	"des", "des3", "desx", "idea", "seed", "rc4", "rc4-40",
+	"des", "des3", "desx", "idea", "rc4", "rc4-40",
 	"rc2", "bf", "cast", "rc5",
 	"des-ecb", "des-ede",    "des-ede3",
 	"des-cbc", "des-ede-cbc","des-ede3-cbc",
 	"des-cfb", "des-ede-cfb","des-ede3-cfb",
 	"des-ofb", "des-ede-ofb","des-ede3-ofb",
-	"idea-cbc","idea-ecb",    "idea-cfb", "idea-ofb",
-	"seed-cbc","seed-ecb",    "seed-cfb", "seed-ofb",
+	"idea-cbc","idea-ecb",   "idea-cfb", "idea-ofb",
 	"rc2-cbc", "rc2-ecb", "rc2-cfb","rc2-ofb", "rc2-64-cbc", "rc2-40-cbc",
 	"bf-cbc",  "bf-ecb",     "bf-cfb",   "bf-ofb",
 	"cast5-cbc","cast5-ecb", "cast5-cfb","cast5-ofb",
@@ -77,16 +64,13 @@ foreach (
 	push(@files,$_);
 
 	$t=sprintf("\t{FUNC_TYPE_CIPHER,\"%s\",enc_main},\n",$_);
-	if    ($_ =~ /des/)  { $t="#ifndef OPENSSL_NO_DES\n${t}#endif\n"; }
-	elsif ($_ =~ /aes/)  { $t="#ifndef OPENSSL_NO_AES\n${t}#endif\n"; }
-	elsif ($_ =~ /camellia/)  { $t="#ifndef OPENSSL_NO_CAMELLIA\n${t}#endif\n"; }
-	elsif ($_ =~ /idea/) { $t="#ifndef OPENSSL_NO_IDEA\n${t}#endif\n"; }
-	elsif ($_ =~ /seed/) { $t="#ifndef OPENSSL_NO_SEED\n${t}#endif\n"; }
-	elsif ($_ =~ /rc4/)  { $t="#ifndef OPENSSL_NO_RC4\n${t}#endif\n"; }
-	elsif ($_ =~ /rc2/)  { $t="#ifndef OPENSSL_NO_RC2\n${t}#endif\n"; }
-	elsif ($_ =~ /bf/)   { $t="#ifndef OPENSSL_NO_BF\n${t}#endif\n"; }
-	elsif ($_ =~ /cast/) { $t="#ifndef OPENSSL_NO_CAST\n${t}#endif\n"; }
-	elsif ($_ =~ /rc5/)  { $t="#ifndef OPENSSL_NO_RC5\n${t}#endif\n"; }
+	if    ($_ =~ /des/)  { $t="#ifndef NO_DES\n${t}#endif\n"; }
+	elsif ($_ =~ /idea/) { $t="#ifndef NO_IDEA\n${t}#endif\n"; }
+	elsif ($_ =~ /rc4/)  { $t="#ifndef NO_RC4\n${t}#endif\n"; }
+	elsif ($_ =~ /rc2/)  { $t="#ifndef NO_RC2\n${t}#endif\n"; }
+	elsif ($_ =~ /bf/)   { $t="#ifndef NO_BF\n${t}#endif\n"; }
+	elsif ($_ =~ /cast/) { $t="#ifndef NO_CAST\n${t}#endif\n"; }
+	elsif ($_ =~ /rc5/)  { $t="#ifndef NO_RC5\n${t}#endif\n"; }
 	print $t;
 	}
 

apps/rand.c

@@ -1,57 +1,4 @@
 /* apps/rand.c */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
 
 #include "apps.h"
 
@@ -62,6 +9,7 @@
 #include <openssl/bio.h>
 #include <openssl/err.h>
 #include <openssl/rand.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG rand_main
@@ -76,9 +24,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
@@ -86,9 +32,7 @@ int MAIN(int argc, char **argv)
 	int base64 = 0;
 	BIO *out = NULL;
 	int num = -1;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
@@ -96,9 +40,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err = BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto err;
-
 	badopt = 0;
 	i = 0;
 	while (!badopt && argv[++i] != NULL)
@@ -110,15 +51,13 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
-#ifndef OPENSSL_NO_ENGINE
-		else if (strcmp(argv[i], "-engine") == 0)
+		if (strcmp(argv[i], "-engine") == 0)
 			{
 			if ((argv[i+1] != NULL) && (engine == NULL))
 				engine = argv[++i];
 			else
 				badopt = 1;
 			}
-#endif
 		else if (strcmp(argv[i], "-rand") == 0)
 			{
 			if ((argv[i+1] != NULL) && (inrand == NULL))
@@ -156,17 +95,29 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "Usage: rand [options] num\n");
 		BIO_printf(bio_err, "where options are\n");
 		BIO_printf(bio_err, "-out file             - write to file\n");
-#ifndef OPENSSL_NO_ENGINE
-		BIO_printf(bio_err, "-engine e             - use engine e, possibly a hardware device.\n");
-#endif
+		BIO_printf(bio_err," -engine e             - use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err, "-base64               - encode output\n");
 		goto err;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto err;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto err;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 	if (inrand != NULL)
@@ -179,15 +130,7 @@ int MAIN(int argc, char **argv)
 	if (outfile != NULL)
 		r = BIO_write_filename(out, outfile);
 	else
-		{
 		r = BIO_set_fp(out, stdout, BIO_NOCLOSE | BIO_FP_TEXT);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
 	if (r <= 0)
 		goto err;
 
@@ -205,7 +148,7 @@ int MAIN(int argc, char **argv)
 		int chunk;
 
 		chunk = num;
-		if (chunk > (int)sizeof(buf))
+		if (chunk > sizeof buf)
 			chunk = sizeof buf;
 		r = RAND_bytes(buf, chunk);
 		if (r <= 0)
@@ -213,7 +156,7 @@ int MAIN(int argc, char **argv)
 		BIO_write(out, buf, chunk);
 		num -= chunk;
 		}
-	(void)BIO_flush(out);
+	BIO_flush(out);
 
 	app_RAND_write_file(NULL, bio_err);
 	ret = 0;
@@ -222,6 +165,5 @@ err:
 	ERR_print_errors(bio_err);
 	if (out)
 		BIO_free_all(out);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/rsa.c

@@ -56,8 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_NO_RSA
+#ifndef NO_RSA
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -69,7 +68,7 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/bn.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	rsa_main
@@ -81,13 +80,6 @@
  * -des		- encrypt output if PEM format with DES in cbc mode
  * -des3	- encrypt output if PEM format
  * -idea	- encrypt output if PEM format
- * -seed	- encrypt output if PEM format
- * -aes128	- encrypt output if PEM format
- * -aes192	- encrypt output if PEM format
- * -aes256	- encrypt output if PEM format
- * -camellia128 - encrypt output if PEM format
- * -camellia192 - encrypt output if PEM format
- * -camellia256 - encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the RSA key modulus
  * -check	- verify key consistency
@@ -104,15 +96,13 @@ int MAIN(int argc, char **argv)
 	RSA *rsa=NULL;
 	int i,badops=0, sgckey=0;
 	const EVP_CIPHER *enc=NULL;
-	BIO *out=NULL;
+	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,check=0,noout=0;
 	int pubin = 0, pubout = 0;
 	char *infile,*outfile,*prog;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 	int modulus=0;
 
 	apps_startup();
@@ -121,9 +111,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -164,13 +151,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-sgckey") == 0)
 			sgckey=1;
 		else if (strcmp(*argv,"-pubin") == 0)
@@ -209,19 +194,8 @@ bad:
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
-#ifndef OPENSSL_NO_IDEA
+#ifndef NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt PEM output with cbc idea\n");
-#endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed           encrypt PEM output with cbc seed\n");
-#endif
-#ifndef OPENSSL_NO_AES
-		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");
@@ -229,17 +203,29 @@ bad:
 		BIO_printf(bio_err," -check          verify key consistency\n");
 		BIO_printf(bio_err," -pubin          expect a public key in input file\n");
 		BIO_printf(bio_err," -pubout         output a public key\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -251,43 +237,75 @@ bad:
 		goto end;
 	}
 
+	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
-
-	{
-		EVP_PKEY	*pkey;
-
-		if (pubin)
-			pkey = load_pubkey(bio_err, infile,
-				(informat == FORMAT_NETSCAPE && sgckey ?
-					FORMAT_IISSGC : informat), 1,
-				passin, e, "Public Key");
-		else
-			pkey = load_key(bio_err, infile,
-				(informat == FORMAT_NETSCAPE && sgckey ?
-					FORMAT_IISSGC : informat), 1,
-				passin, e, "Private Key");
-
-		if (pkey != NULL)
-		rsa = pkey == NULL ? NULL : EVP_PKEY_get1_RSA(pkey);
-		EVP_PKEY_free(pkey);
-	}
-
-	if (rsa == NULL)
+	if ((in == NULL) || (out == NULL))
 		{
 		ERR_print_errors(bio_err);
 		goto end;
 		}
 
-	if (outfile == NULL)
+	if (infile == NULL)
+		BIO_set_fp(in,stdin,BIO_NOCLOSE);
+	else
 		{
-		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
+		if (BIO_read_filename(in,infile) <= 0)
+			{
+			perror(infile);
+			goto end;
+			}
+		}
+
+	BIO_printf(bio_err,"read RSA key\n");
+	if	(informat == FORMAT_ASN1) {
+		if (pubin) rsa=d2i_RSA_PUBKEY_bio(in,NULL);
+		else rsa=d2i_RSAPrivateKey_bio(in,NULL);
+	}
+#ifndef NO_RC4
+	else if (informat == FORMAT_NETSCAPE)
 		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
+		BUF_MEM *buf=NULL;
+		unsigned char *p;
+		int size=0;
+
+		buf=BUF_MEM_new();
+		for (;;)
+			{
+			if ((buf == NULL) || (!BUF_MEM_grow(buf,size+1024*10)))
+				goto end;
+			i=BIO_read(in,&(buf->data[size]),1024*10);
+			size+=i;
+			if (i == 0) break;
+			if (i < 0)
+				{
+				perror("reading private key");
+				BUF_MEM_free(buf);
+				goto end;
+				}
+			}
+		p=(unsigned char *)buf->data;
+		rsa=d2i_RSA_NET(NULL,&p,(long)size,NULL, sgckey);
+		BUF_MEM_free(buf);
 		}
 #endif
+	else if (informat == FORMAT_PEM) {
+		if(pubin) rsa=PEM_read_bio_RSA_PUBKEY(in,NULL,NULL,NULL);
+		else rsa=PEM_read_bio_RSAPrivateKey(in,NULL, NULL,passin);
+	}
+	else
+		{
+		BIO_printf(bio_err,"bad input format specified for key\n");
+		goto end;
 		}
+	if (rsa == NULL)
+		{
+		BIO_printf(bio_err,"unable to load key\n");
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (outfile == NULL)
+		BIO_set_fp(out,stdout,BIO_NOCLOSE);
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -320,14 +338,14 @@ bad:
 			BIO_printf(out,"RSA key ok\n");
 		else if (r == 0)
 			{
-			unsigned long err;
+			long e;
 
-			while ((err = ERR_peek_error()) != 0 &&
-				ERR_GET_LIB(err) == ERR_LIB_RSA &&
-				ERR_GET_FUNC(err) == RSA_F_RSA_CHECK_KEY &&
-				ERR_GET_REASON(err) != ERR_R_MALLOC_FAILURE)
+			while ((e = ERR_peek_error()) != 0 &&
+				ERR_GET_LIB(e) == ERR_LIB_RSA &&
+				ERR_GET_FUNC(e) == RSA_F_RSA_CHECK_KEY &&
+				ERR_GET_REASON(e) != ERR_R_MALLOC_FAILURE)
 				{
-				BIO_printf(out, "RSA key error: %s\n", ERR_reason_error_string(err));
+				BIO_printf(out, "RSA key error: %s\n", ERR_reason_error_string(e));
 				ERR_get_error(); /* remove e from error stack */
 				}
 			}
@@ -349,7 +367,7 @@ bad:
 		if(pubout || pubin) i=i2d_RSA_PUBKEY_bio(out,rsa);
 		else i=i2d_RSAPrivateKey_bio(out,rsa);
 	}
-#ifndef OPENSSL_NO_RC4
+#ifndef NO_RC4
 	else if (outformat == FORMAT_NETSCAPE)
 		{
 		unsigned char *p,*pp;
@@ -385,14 +403,14 @@ bad:
 	else
 		ret=0;
 end:
-	if(out != NULL) BIO_free_all(out);
+	if(in != NULL) BIO_free(in);
+	if(out != NULL) BIO_free(out);
 	if(rsa != NULL) RSA_free(rsa);
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
-#else /* !OPENSSL_NO_RSA */
+#else /* !NO_RSA */
 
 # if PEDANTIC
 static void *dummy=&dummy;

apps/rsautl.c

@@ -55,15 +55,11 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
-
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_NO_RSA
-
 #include "apps.h"
 #include <string.h>
 #include <openssl/err.h>
 #include <openssl/pem.h>
-#include <openssl/rsa.h>
+#include <openssl/engine.h>
 
 #define RSA_SIGN 	1
 #define RSA_VERIFY 	2
@@ -87,9 +83,6 @@ int MAIN(int argc, char **argv)
 	ENGINE *e = NULL;
 	BIO *in = NULL, *out = NULL;
 	char *infile = NULL, *outfile = NULL;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine = NULL;
-#endif
 	char *keyfile = NULL;
 	char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY;
 	int keyform = FORMAT_PEM;
@@ -99,9 +92,9 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey = NULL;
 	RSA *rsa = NULL;
 	unsigned char *rsa_in = NULL, *rsa_out = NULL, pad;
-	char *passargin = NULL, *passin = NULL;
 	int rsa_inlen, rsa_outlen = 0;
 	int keysize;
+	char *engine=NULL;
 
 	int ret = 1;
 
@@ -109,9 +102,6 @@ int MAIN(int argc, char **argv)
 	argv++;
 
 	if(!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
 	ERR_load_crypto_strings();
 	OpenSSL_add_all_algorithms();
 	pad = RSA_PKCS1_PADDING;
@@ -127,17 +117,9 @@ int MAIN(int argc, char **argv)
 		} else if(!strcmp(*argv, "-inkey")) {
 			if (--argc < 1) badarg = 1;
 			keyfile = *(++argv);
-		} else if (!strcmp(*argv,"-passin")) {
-			if (--argc < 1) badarg = 1;
-			passargin= *(++argv);
-		} else if (strcmp(*argv,"-keyform") == 0) {
-			if (--argc < 1) badarg = 1;
-			keyform=str2fmt(*(++argv));
-#ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
 			if (--argc < 1) badarg = 1;
 			engine = *(++argv);
-#endif
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
 		} else if(!strcmp(*argv, "-certin")) {
@@ -149,7 +131,6 @@ int MAIN(int argc, char **argv)
 		else if(!strcmp(*argv, "-oaep")) pad = RSA_PKCS1_OAEP_PADDING;
 		else if(!strcmp(*argv, "-ssl")) pad = RSA_SSLV23_PADDING;
 		else if(!strcmp(*argv, "-pkcs")) pad = RSA_PKCS1_PADDING;
-		else if(!strcmp(*argv, "-x931")) pad = RSA_X931_PADDING;
 		else if(!strcmp(*argv, "-sign")) {
 			rsa_mode = RSA_SIGN;
 			need_priv = 1;
@@ -173,31 +154,38 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
-	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
-		BIO_printf(bio_err, "Error getting password\n");
-		goto end;
-	}
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 /* FIXME: seed PRNG only if needed */
 	app_RAND_load_file(NULL, bio_err, 0);
 	
 	switch(key_type) {
 		case KEY_PRIVKEY:
-		pkey = load_key(bio_err, keyfile, keyform, 0,
-			passin, e, "Private Key");
+		pkey = load_key(bio_err, keyfile, keyform, NULL);
 		break;
 
 		case KEY_PUBKEY:
-		pkey = load_pubkey(bio_err, keyfile, keyform, 0,
-			NULL, e, "Public Key");
+		pkey = load_pubkey(bio_err, keyfile, keyform);
 		break;
 
 		case KEY_CERT:
-		x = load_cert(bio_err, keyfile, keyform,
-			NULL, e, "Certificate");
+		x = load_cert(bio_err, keyfile, keyform);
 		if(x) {
 			pkey = X509_get_pubkey(x);
 			X509_free(x);
@@ -206,6 +194,7 @@ int MAIN(int argc, char **argv)
 	}
 
 	if(!pkey) {
+		BIO_printf(bio_err, "Error loading key\n");
 		return 1;
 	}
 
@@ -233,15 +222,7 @@ int MAIN(int argc, char **argv)
 			ERR_print_errors(bio_err);	
 			goto end;
 		}
-	} else {
-		out = BIO_new_fp(stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		    out = BIO_push(tmpbio, out);
-		}
-#endif
-	}
+	} else out = BIO_new_fp(stdout, BIO_NOCLOSE);
 
 	keysize = RSA_size(rsa);
 
@@ -298,10 +279,9 @@ int MAIN(int argc, char **argv)
 	end:
 	RSA_free(rsa);
 	BIO_free(in);
-	BIO_free_all(out);
+	BIO_free(out);
 	if(rsa_in) OPENSSL_free(rsa_in);
 	if(rsa_out) OPENSSL_free(rsa_out);
-	if(passin) OPENSSL_free(passin);
 	return ret;
 }
 
@@ -311,9 +291,9 @@ static void usage()
 	BIO_printf(bio_err, "-in file        input file\n");
 	BIO_printf(bio_err, "-out file       output file\n");
 	BIO_printf(bio_err, "-inkey file     input key\n");
-	BIO_printf(bio_err, "-keyform arg    private key format - default PEM\n");
 	BIO_printf(bio_err, "-pubin          input is an RSA public\n");
 	BIO_printf(bio_err, "-certin         input is a certificate carrying an RSA public key\n");
+	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
 	BIO_printf(bio_err, "-ssl            use SSL v2 padding\n");
 	BIO_printf(bio_err, "-raw            use no padding\n");
 	BIO_printf(bio_err, "-pkcs           use PKCS#1 v1.5 padding (default)\n");
@@ -323,11 +303,5 @@ static void usage()
 	BIO_printf(bio_err, "-encrypt        encrypt with public key\n");
 	BIO_printf(bio_err, "-decrypt        decrypt with private key\n");
 	BIO_printf(bio_err, "-hexdump        hex dump output\n");
-#ifndef OPENSSL_NO_ENGINE
-	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
-	BIO_printf (bio_err, "-passin arg    pass phrase source\n");
-#endif
-
 }
 
-#endif

apps/s_apps.h

@@ -55,73 +55,9 @@
  * copied and put under another distribution licence
  * [including the GNU Public Licence.]
  */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#if !defined(OPENSSL_SYS_NETWARE)  /* conflicts with winsock2 stuff on netware */
+
 #include <sys/types.h>
-#endif
-#include <openssl/opensslconf.h>
-
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-#include <conio.h>
-#endif
-
-#ifdef OPENSSL_SYS_MSDOS
-#define _kbhit kbhit
-#endif
-
-#if defined(OPENSSL_SYS_VMS) && !defined(FD_SET)
+#if (defined(VMS) || defined(__VMS)) && !defined(FD_SET)
 /* VAX C does not defined fd_set and friends, but it's actually quite simple */
 /* These definitions are borrowed from SOCKETSHR.	/Richard Levitte */
 #define MAX_NOFILE	32
@@ -148,23 +84,28 @@ typedef fd_mask fd_set;
 #define PORT_STR        "4433"
 #define PROTOCOL        "tcp"
 
-int do_server(int port, int type, int *ret, int (*cb) (char *hostname, int s, unsigned char *context), unsigned char *context);
+int do_server(int port, int *ret, int (*cb) (), char *context);
 #ifdef HEADER_X509_H
 int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx);
+#else
+int MS_CALLBACK verify_callback(int ok, char *ctx);
 #endif
 #ifdef HEADER_SSL_H
 int set_cert_stuff(SSL_CTX *ctx, char *cert_file, char *key_file);
-int set_cert_key_stuff(SSL_CTX *ctx, X509 *cert, EVP_PKEY *key);
+#else
+int set_cert_stuff(char *ctx, char *cert_file, char *key_file);
 #endif
-int init_client(int *sock, char *server, int port, int type);
+int init_client(int *sock, char *server, int port);
 int should_retry(int i);
 int extract_port(char *str, short *port_ptr);
 int extract_host_port(char *str,char **host_ptr,unsigned char *ip,short *p);
 
-long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
+long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp,
 	int argi, long argl, long ret);
 
 #ifdef HEADER_SSL_H
-void MS_CALLBACK apps_ssl_info_callback(const SSL *s, int where, int ret);
-void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg);
+void MS_CALLBACK apps_ssl_info_callback(SSL *s, int where, int ret);
+#else
+void MS_CALLBACK apps_ssl_info_callback(char *s, int where, int ret);
 #endif
+

apps/s_cb.c

@@ -55,59 +55,6 @@
  * copied and put under another distribution licence
  * [including the GNU Public Licence.]
  */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -134,7 +81,7 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	err=	X509_STORE_CTX_get_error(ctx);
 	depth=	X509_STORE_CTX_get_error_depth(ctx);
 
-	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,sizeof buf);
+	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,256);
 	BIO_printf(bio_err,"depth=%d %s\n",depth,buf);
 	if (!ok)
 		{
@@ -154,7 +101,7 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	switch (ctx->error)
 		{
 	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
-		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,sizeof buf);
+		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,256);
 		BIO_printf(bio_err,"issuer= %s\n",buf);
 		break;
 	case X509_V_ERR_CERT_NOT_YET_VALID:
@@ -229,36 +176,8 @@ int set_cert_stuff(SSL_CTX *ctx, char *cert_file, char *key_file)
 	return(1);
 	}
 
-int set_cert_key_stuff(SSL_CTX *ctx, X509 *cert, EVP_PKEY *key)
-	{
-	if (cert ==  NULL)
-		return 1;
-	if (SSL_CTX_use_certificate(ctx,cert) <= 0)
-		{
-		BIO_printf(bio_err,"error setting certificate\n");
-		ERR_print_errors(bio_err);
-		return 0;
-		}
-	if (SSL_CTX_use_PrivateKey(ctx,key) <= 0)
-		{
-		BIO_printf(bio_err,"error setting private key\n");
-		ERR_print_errors(bio_err);
-		return 0;
-		}
-
-		
-		/* Now we know that a key and cert have been set against
-		 * the SSL context */
-	if (!SSL_CTX_check_private_key(ctx))
-		{
-		BIO_printf(bio_err,"Private key does not match the certificate public key\n");
-		return 0;
-		}
-	return 1;
-	}
-
-long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
-	int argi, long argl, long ret)
+long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp, int argi,
+	     long argl, long ret)
 	{
 	BIO *out;
 
@@ -267,23 +186,23 @@ long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
 
 	if (cmd == (BIO_CB_READ|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"read from %p [%p] (%d bytes => %ld (0x%lX))\n",
- 			(void *)bio,argp,argi,ret,ret);
+		BIO_printf(out,"read from %08X [%08lX] (%d bytes => %ld (0x%X))\n",
+			bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		return(ret);
 		}
 	else if (cmd == (BIO_CB_WRITE|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"write to %p [%p] (%d bytes => %ld (0x%lX))\n",
-			(void *)bio,argp,argi,ret,ret);
+		BIO_printf(out,"write to %08X [%08lX] (%d bytes => %ld (0x%X))\n",
+			bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		}
 	return(ret);
 	}
 
-void MS_CALLBACK apps_ssl_info_callback(const SSL *s, int where, int ret)
+void MS_CALLBACK apps_ssl_info_callback(SSL *s, int where, int ret)
 	{
-	const char *str;
+	char *str;
 	int w;
 
 	w=where& ~SSL_ST_MASK;
@@ -317,261 +236,3 @@ void MS_CALLBACK apps_ssl_info_callback(const SSL *s, int where, int ret)
 		}
 	}
 
-
-void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)
-	{
-	BIO *bio = arg;
-	const char *str_write_p, *str_version, *str_content_type = "", *str_details1 = "", *str_details2= "";
-	
-	str_write_p = write_p ? ">>>" : "<<<";
-
-	switch (version)
-		{
-	case SSL2_VERSION:
-		str_version = "SSL 2.0";
-		break;
-	case SSL3_VERSION:
-		str_version = "SSL 3.0 ";
-		break;
-	case TLS1_VERSION:
-		str_version = "TLS 1.0 ";
-		break;
-	default:
-		str_version = "???";
-		}
-
-	if (version == SSL2_VERSION)
-		{
-		str_details1 = "???";
-
-		if (len > 0)
-			{
-			switch (((const unsigned char*)buf)[0])
-				{
-				case 0:
-					str_details1 = ", ERROR:";
-					str_details2 = " ???";
-					if (len >= 3)
-						{
-						unsigned err = (((const unsigned char*)buf)[1]<<8) + ((const unsigned char*)buf)[2];
-						
-						switch (err)
-							{
-						case 0x0001:
-							str_details2 = " NO-CIPHER-ERROR";
-							break;
-						case 0x0002:
-							str_details2 = " NO-CERTIFICATE-ERROR";
-							break;
-						case 0x0004:
-							str_details2 = " BAD-CERTIFICATE-ERROR";
-							break;
-						case 0x0006:
-							str_details2 = " UNSUPPORTED-CERTIFICATE-TYPE-ERROR";
-							break;
-							}
-						}
-
-					break;
-				case 1:
-					str_details1 = ", CLIENT-HELLO";
-					break;
-				case 2:
-					str_details1 = ", CLIENT-MASTER-KEY";
-					break;
-				case 3:
-					str_details1 = ", CLIENT-FINISHED";
-					break;
-				case 4:
-					str_details1 = ", SERVER-HELLO";
-					break;
-				case 5:
-					str_details1 = ", SERVER-VERIFY";
-					break;
-				case 6:
-					str_details1 = ", SERVER-FINISHED";
-					break;
-				case 7:
-					str_details1 = ", REQUEST-CERTIFICATE";
-					break;
-				case 8:
-					str_details1 = ", CLIENT-CERTIFICATE";
-					break;
-				}
-			}
-		}
-
-	if (version == SSL3_VERSION || version == TLS1_VERSION)
-		{
-		switch (content_type)
-			{
-		case 20:
-			str_content_type = "ChangeCipherSpec";
-			break;
-		case 21:
-			str_content_type = "Alert";
-			break;
-		case 22:
-			str_content_type = "Handshake";
-			break;
-			}
-
-		if (content_type == 21) /* Alert */
-			{
-			str_details1 = ", ???";
-			
-			if (len == 2)
-				{
-				switch (((const unsigned char*)buf)[0])
-					{
-				case 1:
-					str_details1 = ", warning";
-					break;
-				case 2:
-					str_details1 = ", fatal";
-					break;
-					}
-
-				str_details2 = " ???";
-				switch (((const unsigned char*)buf)[1])
-					{
-				case 0:
-					str_details2 = " close_notify";
-					break;
-				case 10:
-					str_details2 = " unexpected_message";
-					break;
-				case 20:
-					str_details2 = " bad_record_mac";
-					break;
-				case 21:
-					str_details2 = " decryption_failed";
-					break;
-				case 22:
-					str_details2 = " record_overflow";
-					break;
-				case 30:
-					str_details2 = " decompression_failure";
-					break;
-				case 40:
-					str_details2 = " handshake_failure";
-					break;
-				case 42:
-					str_details2 = " bad_certificate";
-					break;
-				case 43:
-					str_details2 = " unsupported_certificate";
-					break;
-				case 44:
-					str_details2 = " certificate_revoked";
-					break;
-				case 45:
-					str_details2 = " certificate_expired";
-					break;
-				case 46:
-					str_details2 = " certificate_unknown";
-					break;
-				case 47:
-					str_details2 = " illegal_parameter";
-					break;
-				case 48:
-					str_details2 = " unknown_ca";
-					break;
-				case 49:
-					str_details2 = " access_denied";
-					break;
-				case 50:
-					str_details2 = " decode_error";
-					break;
-				case 51:
-					str_details2 = " decrypt_error";
-					break;
-				case 60:
-					str_details2 = " export_restriction";
-					break;
-				case 70:
-					str_details2 = " protocol_version";
-					break;
-				case 71:
-					str_details2 = " insufficient_security";
-					break;
-				case 80:
-					str_details2 = " internal_error";
-					break;
-				case 90:
-					str_details2 = " user_canceled";
-					break;
-				case 100:
-					str_details2 = " no_renegotiation";
-					break;
-					}
-				}
-			}
-		
-		if (content_type == 22) /* Handshake */
-			{
-			str_details1 = "???";
-
-			if (len > 0)
-				{
-				switch (((const unsigned char*)buf)[0])
-					{
-				case 0:
-					str_details1 = ", HelloRequest";
-					break;
-				case 1:
-					str_details1 = ", ClientHello";
-					break;
-				case 2:
-					str_details1 = ", ServerHello";
-					break;
-				case 11:
-					str_details1 = ", Certificate";
-					break;
-				case 12:
-					str_details1 = ", ServerKeyExchange";
-					break;
-				case 13:
-					str_details1 = ", CertificateRequest";
-					break;
-				case 14:
-					str_details1 = ", ServerHelloDone";
-					break;
-				case 15:
-					str_details1 = ", CertificateVerify";
-					break;
-				case 16:
-					str_details1 = ", ClientKeyExchange";
-					break;
-				case 20:
-					str_details1 = ", Finished";
-					break;
-					}
-				}
-			}
-		}
-
-	BIO_printf(bio, "%s %s%s [length %04lx]%s%s\n", str_write_p, str_version, str_content_type, (unsigned long)len, str_details1, str_details2);
-
-	if (len > 0)
-		{
-		size_t num, i;
-		
-		BIO_printf(bio, "   ");
-		num = len;
-#if 0
-		if (num > 16)
-			num = 16;
-#endif
-		for (i = 0; i < num; i++)
-			{
-			if (i % 16 == 0 && i > 0)
-				BIO_printf(bio, "\n   ");
-			BIO_printf(bio, " %02x", ((const unsigned char*)buf)[i]);
-			}
-		if (i < len)
-			BIO_printf(bio, " ...");
-		BIO_printf(bio, "\n");
-		}
-	(void)BIO_flush(bio);
-	}

apps/s_client.c

@@ -55,66 +55,12 @@
  * copied and put under another distribution licence
  * [including the GNU Public Licence.]
  */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
 
 #include <assert.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-#include <openssl/e_os2.h>
-#ifdef OPENSSL_NO_STDIO
+#ifdef NO_STDIO
 #define APPS_WIN16
 #endif
 
@@ -122,7 +68,7 @@
    recursive header file inclusion, resulting in the compiler complaining
    that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
    is needed to have fileno() declared correctly...  So let's define u_int */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__U_INT)
+#if defined(VMS) && defined(__DECC) && !defined(__U_INT)
 #define __U_INT
 typedef unsigned int u_int;
 #endif
@@ -133,20 +79,15 @@ typedef unsigned int u_int;
 #include <openssl/ssl.h>
 #include <openssl/err.h>
 #include <openssl/pem.h>
-#include <openssl/rand.h>
+#include <openssl/engine.h>
 #include "s_apps.h"
-#include "timeouts.h"
 
-#ifdef OPENSSL_SYS_WINCE
-/* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
-#ifdef fileno
-#undef fileno
-#endif
-#define fileno(a) (int)_fileno(a)
+#ifdef WINDOWS
+#include <conio.h>
 #endif
 
 
-#if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
+#if (defined(VMS) && __VMS_VER < 70000000)
 /* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
 #undef FIONBIO
 #endif
@@ -171,7 +112,6 @@ static int c_nbio=0;
 #endif
 static int c_Pause=0;
 static int c_debug=0;
-static int c_msg=0;
 static int c_showcerts=0;
 
 static void sc_usage(void);
@@ -188,23 +128,16 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -port port     - use -connect instead\n");
 	BIO_printf(bio_err," -connect host:port - who to connect to (default is %s:%s)\n",SSL_HOST_NAME,PORT_STR);
 
-	BIO_printf(bio_err," -verify depth - turn on peer certificate verification\n");
+	BIO_printf(bio_err," -verify arg   - turn on peer certificate verification\n");
 	BIO_printf(bio_err," -cert arg     - certificate file to use, PEM format assumed\n");
-	BIO_printf(bio_err," -certform arg - certificate format (PEM or DER) PEM default\n");
-	BIO_printf(bio_err," -key arg      - Private key file to use, in cert file if\n");
+	BIO_printf(bio_err," -key arg      - Private key file to use, PEM format assumed, in cert file if\n");
 	BIO_printf(bio_err,"                 not specified but cert file is.\n");
-	BIO_printf(bio_err," -keyform arg  - key format (PEM or DER) PEM default\n");
-	BIO_printf(bio_err," -pass arg     - private key file pass phrase source\n");
 	BIO_printf(bio_err," -CApath arg   - PEM format directory of CA's\n");
 	BIO_printf(bio_err," -CAfile arg   - PEM format file of CA's\n");
 	BIO_printf(bio_err," -reconnect    - Drop and re-make the connection with the same Session-ID\n");
 	BIO_printf(bio_err," -pause        - sleep(1) after each read(2) and write(2) system call\n");
 	BIO_printf(bio_err," -showcerts    - show all certificates in the chain\n");
 	BIO_printf(bio_err," -debug        - extra output\n");
-#ifdef WATT32
-	BIO_printf(bio_err," -wdebug       - WATT-32 tcp debugging\n");
-#endif
-	BIO_printf(bio_err," -msg          - Show protocol messages\n");
 	BIO_printf(bio_err," -nbio_test    - more ssl protocol testing\n");
 	BIO_printf(bio_err," -state        - print the 'ssl' states\n");
 #ifdef FIONBIO
@@ -216,42 +149,22 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -ssl2         - just use SSLv2\n");
 	BIO_printf(bio_err," -ssl3         - just use SSLv3\n");
 	BIO_printf(bio_err," -tls1         - just use TLSv1\n");
-	BIO_printf(bio_err," -dtls1        - just use DTLSv1\n");    
-	BIO_printf(bio_err," -mtu          - set the MTU\n");
 	BIO_printf(bio_err," -no_tls1/-no_ssl3/-no_ssl2 - turn off that protocol\n");
 	BIO_printf(bio_err," -bugs         - Switch on all SSL implementation bug workarounds\n");
-	BIO_printf(bio_err," -serverpref   - Use server's cipher preferences (only SSLv2)\n");
 	BIO_printf(bio_err," -cipher       - preferred cipher to use, use the 'openssl ciphers'\n");
 	BIO_printf(bio_err,"                 command to see what is available\n");
-	BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
-	BIO_printf(bio_err,"                 for those protocols that support it, where\n");
-	BIO_printf(bio_err,"                 'prot' defines which one to assume.  Currently,\n");
-	BIO_printf(bio_err,"                 only \"smtp\", \"pop3\", \"imap\", and \"ftp\" are supported.\n");
-#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
-#endif
-	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 
 	}
 
-enum
-{
-	PROTO_OFF	= 0,
-	PROTO_SMTP,
-	PROTO_POP3,
-	PROTO_IMAP,
-	PROTO_FTP
-};
-
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
 	int off=0;
 	SSL *con=NULL,*con2=NULL;
-	X509_STORE *store = NULL;
 	int s,k,width,state=0;
-	char *cbuf=NULL,*sbuf=NULL,*mbuf=NULL;
+	char *cbuf=NULL,*sbuf=NULL;
 	int cbuf_len,cbuf_off;
 	int sbuf_len,sbuf_off;
 	fd_set readfds,writefds;
@@ -259,44 +172,26 @@ int MAIN(int argc, char **argv)
 	int full_log=1;
 	char *host=SSL_HOST_NAME;
 	char *cert_file=NULL,*key_file=NULL;
-	int cert_format = FORMAT_PEM, key_format = FORMAT_PEM;
-	char *passarg = NULL, *pass = NULL;
-	X509 *cert = NULL;
-	EVP_PKEY *key = NULL;
 	char *CApath=NULL,*CAfile=NULL,*cipher=NULL;
 	int reconnect=0,badop=0,verify=SSL_VERIFY_NONE,bugs=0;
 	int crlf=0;
 	int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
 	SSL_CTX *ctx=NULL;
 	int ret=1,in_init=1,i,nbio_test=0;
-	int starttls_proto = PROTO_OFF;
-	int prexit = 0, vflags = 0;
+	int prexit = 0;
 	SSL_METHOD *meth=NULL;
-#ifdef sock_type
-#undef sock_type
-#endif
-	int sock_type=SOCK_STREAM;
 	BIO *sbio;
-	char *inrand=NULL;
-	int mbuf_len=0;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
 	ENGINE *e=NULL;
-#endif
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
+#ifdef WINDOWS
 	struct timeval tv;
 #endif
 
-	struct sockaddr peer;
-	int peerlen = sizeof(peer);
-	int enable_timeouts = 0 ;
-	long mtu = 0;
-
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
+#if !defined(NO_SSL2) && !defined(NO_SSL3)
 	meth=SSLv23_client_method();
-#elif !defined(OPENSSL_NO_SSL3)
+#elif !defined(NO_SSL3)
 	meth=SSLv3_client_method();
-#elif !defined(OPENSSL_NO_SSL2)
+#elif !defined(NO_SSL2)
 	meth=SSLv2_client_method();
 #endif
 
@@ -305,18 +200,13 @@ int MAIN(int argc, char **argv)
 	c_quiet=0;
 	c_ign_eof=0;
 	c_debug=0;
-	c_msg=0;
 	c_showcerts=0;
 
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	if (	((cbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
-		((sbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
-		((mbuf=OPENSSL_malloc(BUFSIZZ)) == NULL))
+		((sbuf=OPENSSL_malloc(BUFSIZZ)) == NULL))
 		{
 		BIO_printf(bio_err,"out of memory\n");
 		goto end;
@@ -361,15 +251,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			cert_file= *(++argv);
 			}
-		else if	(strcmp(*argv,"-certform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			cert_format = str2fmt(*(++argv));
-			}
-		else if	(strcmp(*argv,"-crl_check") == 0)
-			vflags |= X509_V_FLAG_CRL_CHECK;
-		else if	(strcmp(*argv,"-crl_check_all") == 0)
-			vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
 		else if	(strcmp(*argv,"-prexit") == 0)
 			prexit=1;
 		else if	(strcmp(*argv,"-crlf") == 0)
@@ -385,56 +266,26 @@ int MAIN(int argc, char **argv)
 			c_Pause=1;
 		else if	(strcmp(*argv,"-debug") == 0)
 			c_debug=1;
-#ifdef WATT32
-		else if (strcmp(*argv,"-wdebug") == 0)
-			dbug_init();
-#endif
-		else if	(strcmp(*argv,"-msg") == 0)
-			c_msg=1;
 		else if	(strcmp(*argv,"-showcerts") == 0)
 			c_showcerts=1;
 		else if	(strcmp(*argv,"-nbio_test") == 0)
 			nbio_test=1;
 		else if	(strcmp(*argv,"-state") == 0)
 			state=1;
-#ifndef OPENSSL_NO_SSL2
+#ifndef NO_SSL2
 		else if	(strcmp(*argv,"-ssl2") == 0)
 			meth=SSLv2_client_method();
 #endif
-#ifndef OPENSSL_NO_SSL3
+#ifndef NO_SSL3
 		else if	(strcmp(*argv,"-ssl3") == 0)
 			meth=SSLv3_client_method();
 #endif
-#ifndef OPENSSL_NO_TLS1
+#ifndef NO_TLS1
 		else if	(strcmp(*argv,"-tls1") == 0)
 			meth=TLSv1_client_method();
-#endif
-#ifndef OPENSSL_NO_DTLS1
-		else if	(strcmp(*argv,"-dtls1") == 0)
-			{
-			meth=DTLSv1_client_method();
-			sock_type=SOCK_DGRAM;
-			}
-		else if (strcmp(*argv,"-timeout") == 0)
-			enable_timeouts=1;
-		else if (strcmp(*argv,"-mtu") == 0)
-			{
-			if (--argc < 1) goto bad;
-			mtu = atol(*(++argv));
-			}
 #endif
 		else if (strcmp(*argv,"-bugs") == 0)
 			bugs=1;
-		else if	(strcmp(*argv,"-keyform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			key_format = str2fmt(*(++argv));
-			}
-		else if	(strcmp(*argv,"-pass") == 0)
-			{
-			if (--argc < 1) goto bad;
-			passarg = *(++argv);
-			}
 		else if	(strcmp(*argv,"-key") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -460,8 +311,6 @@ int MAIN(int argc, char **argv)
 			off|=SSL_OP_NO_SSLv3;
 		else if (strcmp(*argv,"-no_ssl2") == 0)
 			off|=SSL_OP_NO_SSLv2;
-		else if (strcmp(*argv,"-serverpref") == 0)
-			off|=SSL_OP_CIPHER_SERVER_PREFERENCE;
 		else if	(strcmp(*argv,"-cipher") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -471,33 +320,11 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-nbio") == 0)
 			{ c_nbio=1; }
 #endif
-		else if	(strcmp(*argv,"-starttls") == 0)
-			{
-			if (--argc < 1) goto bad;
-			++argv;
-			if (strcmp(*argv,"smtp") == 0)
-				starttls_proto = PROTO_SMTP;
-			else if (strcmp(*argv,"pop3") == 0)
-				starttls_proto = PROTO_POP3;
-			else if (strcmp(*argv,"imap") == 0)
-				starttls_proto = PROTO_IMAP;
-			else if (strcmp(*argv,"ftp") == 0)
-				starttls_proto = PROTO_FTP;
-			else
-				goto bad;
-			}
-#ifndef OPENSSL_NO_ENGINE
 		else if	(strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id = *(++argv);
 			}
-#endif
-		else if (strcmp(*argv,"-rand") == 0)
-			{
-			if (--argc < 1) goto bad;
-			inrand= *(++argv);
-			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -514,61 +341,11 @@ bad:
 		goto end;
 		}
 
-	OpenSSL_add_ssl_algorithms();
-	SSL_load_error_strings();
-
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine_id, 1);
-#endif
-	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
-		{
-		BIO_printf(bio_err, "Error getting password\n");
-		goto end;
-		}
-
-	if (key_file == NULL)
-		key_file = cert_file;
-
-
-	if (key_file)
-
-		{
-
-		key = load_key(bio_err, key_file, key_format, 0, pass, e,
-			       "client certificate private key file");
-		if (!key)
-			{
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-
-		}
-
-	if (cert_file)
-
-		{
-		cert = load_cert(bio_err,cert_file,cert_format,
-				NULL, e, "client certificate file");
-
-		if (!cert)
-			{
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		}
-
-	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
-		&& !RAND_status())
-		{
-		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
-		}
-	if (inrand != NULL)
-		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
-			app_RAND_load_files(inrand));
+	app_RAND_load_file(NULL, bio_err, 0);
 
 	if (bio_c_out == NULL)
 		{
-		if (c_quiet && !c_debug && !c_msg)
+		if (c_quiet)
 			{
 			bio_c_out=BIO_new(BIO_s_null());
 			}
@@ -579,6 +356,32 @@ bad:
 			}
 		}
 
+	OpenSSL_add_ssl_algorithms();
+	SSL_load_error_strings();
+
+	if (engine_id != NULL)
+		{
+		if((e = ENGINE_by_id(engine_id)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		if (c_debug)
+			{
+			ENGINE_ctrl(e, ENGINE_CTRL_SET_LOGSTREAM,
+				0, bio_err, 0);
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine_id);
+		ENGINE_free(e);
+		}
+
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL)
 		{
@@ -590,10 +393,6 @@ bad:
 		SSL_CTX_set_options(ctx,SSL_OP_ALL|off);
 	else
 		SSL_CTX_set_options(ctx,off);
-	/* DTLS: partial reads end up discarding unread UDP bytes :-( 
-	 * Setting read ahead solves this problem.
-	 */
-	if (sock_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
 
 	if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
 	if (cipher != NULL)
@@ -608,7 +407,7 @@ bad:
 #endif
 
 	SSL_CTX_set_verify(ctx,verify,verify_callback);
-	if (!set_cert_key_stuff(ctx,cert,key))
+	if (!set_cert_stuff(ctx,cert_file,key_file))
 		goto end;
 
 	if ((!SSL_CTX_load_verify_locations(ctx,CAfile,CApath)) ||
@@ -619,21 +418,13 @@ bad:
 		/* goto end; */
 		}
 
-	store = SSL_CTX_get_cert_store(ctx);
-	X509_STORE_set_flags(store, vflags);
 
 	con=SSL_new(ctx);
-#ifndef OPENSSL_NO_KRB5
-	if (con  &&  (con->kssl_ctx = kssl_ctx_new()) != NULL)
-                {
-                kssl_ctx_setstring(con->kssl_ctx, KSSL_SERVER, host);
-		}
-#endif	/* OPENSSL_NO_KRB5  */
 /*	SSL_set_cipher_list(con,"RC4-MD5"); */
 
 re_start:
 
-	if (init_client(&s,host,port,sock_type) == 0)
+	if (init_client(&s,host,port) == 0)
 		{
 		BIO_printf(bio_err,"connect:errno=%d\n",get_last_socket_error());
 		SHUTDOWN(s);
@@ -654,46 +445,7 @@ re_start:
 		}
 #endif                                              
 	if (c_Pause & 0x01) con->debug=1;
-
-	if ( SSL_version(con) == DTLS1_VERSION)
-		{
-		struct timeval timeout;
-
-		sbio=BIO_new_dgram(s,BIO_NOCLOSE);
-		if (getsockname(s, &peer, (void *)&peerlen) < 0)
-			{
-			BIO_printf(bio_err, "getsockname:errno=%d\n",
-				get_last_socket_error());
-			SHUTDOWN(s);
-			goto end;
-			}
-
-		(void)BIO_ctrl_set_connected(sbio, 1, &peer);
-
-		if ( enable_timeouts)
-			{
-			timeout.tv_sec = 0;
-			timeout.tv_usec = DGRAM_RCV_TIMEOUT;
-			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);
-			
-			timeout.tv_sec = 0;
-			timeout.tv_usec = DGRAM_SND_TIMEOUT;
-			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
-			}
-
-		if ( mtu > 0)
-			{
-			SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
-			SSL_set_mtu(con, mtu);
-			}
-		else
-			/* want to do MTU discovery */
-			BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
-		}
-	else
-		sbio=BIO_new_socket(s,BIO_NOCLOSE);
-
-
+	sbio=BIO_new_socket(s,BIO_NOCLOSE);
 
 	if (nbio_test)
 		{
@@ -706,13 +458,8 @@ re_start:
 	if (c_debug)
 		{
 		con->debug=1;
-		BIO_set_callback(sbio,bio_dump_callback);
-		BIO_set_callback_arg(sbio,(char *)bio_c_out);
-		}
-	if (c_msg)
-		{
-		SSL_set_msg_callback(con, msg_cb);
-		SSL_set_msg_callback_arg(con, bio_c_out);
+		BIO_set_callback(sbio,bio_dump_cb);
+		BIO_set_callback_arg(sbio,bio_c_out);
 		}
 
 	SSL_set_bio(con,sbio,sbio);
@@ -732,95 +479,6 @@ re_start:
 	sbuf_len=0;
 	sbuf_off=0;
 
-	/* This is an ugly hack that does a lot of assumptions */
-	/* We do have to handle multi-line responses which may come
- 	   in a single packet or not. We therefore have to use
-	   BIO_gets() which does need a buffering BIO. So during
-	   the initial chitchat we do push a buffering BIO into the
-	   chain that is removed again later on to not disturb the
-	   rest of the s_client operation. */
-	if (starttls_proto == PROTO_SMTP)
-		{
-		int foundit=0;
-		BIO *fbio = BIO_new(BIO_f_buffer());
-		BIO_push(fbio, sbio);
-		/* wait for multi-line response to end from SMTP */
-		do
-			{
-			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
-			}
-		while (mbuf_len>3 && mbuf[3]=='-');
-		/* STARTTLS command requires EHLO... */
-		BIO_printf(fbio,"EHLO openssl.client.net\r\n");
-		(void)BIO_flush(fbio);
-		/* wait for multi-line response to end EHLO SMTP response */
-		do
-			{
-			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
-			if (strstr(mbuf,"STARTTLS"))
-				foundit=1;
-			}
-		while (mbuf_len>3 && mbuf[3]=='-');
-		(void)BIO_flush(fbio);
-		BIO_pop(fbio);
-		BIO_free(fbio);
-		if (!foundit)
-			BIO_printf(bio_err,
-				   "didn't found starttls in server response,"
-				   " try anyway...\n");
-		BIO_printf(sbio,"STARTTLS\r\n");
-		BIO_read(sbio,sbuf,BUFSIZZ);
-		}
-	else if (starttls_proto == PROTO_POP3)
-		{
-		BIO_read(sbio,mbuf,BUFSIZZ);
-		BIO_printf(sbio,"STLS\r\n");
-		BIO_read(sbio,sbuf,BUFSIZZ);
-		}
-	else if (starttls_proto == PROTO_IMAP)
-		{
-		int foundit=0;
-		BIO *fbio = BIO_new(BIO_f_buffer());
-		BIO_push(fbio, sbio);
-		BIO_gets(fbio,mbuf,BUFSIZZ);
-		/* STARTTLS command requires CAPABILITY... */
-		BIO_printf(fbio,". CAPABILITY\r\n");
-		(void)BIO_flush(fbio);
-		/* wait for multi-line CAPABILITY response */
-		do
-			{
-			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
-			if (strstr(mbuf,"STARTTLS"))
-				foundit=1;
-			}
-		while (mbuf_len>3 && mbuf[0]!='.');
-		(void)BIO_flush(fbio);
-		BIO_pop(fbio);
-		BIO_free(fbio);
-		if (!foundit)
-			BIO_printf(bio_err,
-				   "didn't found STARTTLS in server response,"
-				   " try anyway...\n");
-		BIO_printf(sbio,". STARTTLS\r\n");
-		BIO_read(sbio,sbuf,BUFSIZZ);
-		}
-	else if (starttls_proto == PROTO_FTP)
-		{
-		BIO *fbio = BIO_new(BIO_f_buffer());
-		BIO_push(fbio, sbio);
-		/* wait for multi-line response to end from FTP */
-		do
-			{
-			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
-			}
-		while (mbuf_len>3 && mbuf[3]=='-');
-		(void)BIO_flush(fbio);
-		BIO_pop(fbio);
-		BIO_free(fbio);
-		BIO_printf(sbio,"AUTH TLS\r\n");
-		BIO_read(sbio,sbuf,BUFSIZZ);
-		}
-
 	for (;;)
 		{
 		FD_ZERO(&readfds);
@@ -840,13 +498,6 @@ re_start:
 				print_stuff(bio_c_out,con,full_log);
 				if (full_log > 0) full_log--;
 
-				if (starttls_proto)
-					{
-					BIO_printf(bio_err,"%s",mbuf);
-					/* We don't need to know any more */
-					starttls_proto = PROTO_OFF;
-					}
-
 				if (reconnect)
 					{
 					reconnect--;
@@ -863,7 +514,7 @@ re_start:
 
 		if (!ssl_pending)
 			{
-#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
+#ifndef WINDOWS
 			if (tty_on)
 				{
 				if (read_tty)  FD_SET(fileno(stdin),&readfds);
@@ -890,8 +541,8 @@ re_start:
 			 * will choke the compiler: if you do have a cast then
 			 * you can either go for (int *) or (void *).
 			 */
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-                        /* Under Windows/DOS we make the assumption that we can
+#ifdef WINDOWS
+			/* Under Windows we make the assumption that we can
 			 * always write to the tty: therefore if we need to
 			 * write to the tty we just fall through. Otherwise
 			 * we timeout the select every second and see if there
@@ -905,24 +556,10 @@ re_start:
 					tv.tv_usec = 0;
 					i=select(width,(void *)&readfds,(void *)&writefds,
 						 NULL,&tv);
-#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
-					if(!i && (!_kbhit() || !read_tty) ) continue;
-#else
 					if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
-#endif
 				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
 					 NULL,NULL);
 			}
-#elif defined(OPENSSL_SYS_NETWARE)
-			if(!write_tty) {
-				if(read_tty) {
-					tv.tv_sec = 1;
-					tv.tv_usec = 0;
-					i=select(width,(void *)&readfds,(void *)&writefds,
-						NULL,&tv);
-				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
-					NULL,NULL);
-			}
 #else
 			i=select(width,(void *)&readfds,(void *)&writefds,
 				 NULL,NULL);
@@ -1003,8 +640,8 @@ re_start:
 				goto shut;
 				}
 			}
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
-		/* Assume Windows/DOS can always write */
+#ifdef WINDOWS
+		/* Assume Windows can always write */
 		else if (!ssl_pending && write_tty)
 #else
 		else if (!ssl_pending && FD_ISSET(fileno(stdout),&writefds))
@@ -1084,14 +721,8 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				}
 			}
 
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
-		else if (_kbhit())
-#else
+#ifdef WINDOWS
 		else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
-#endif
-#elif defined (OPENSSL_SYS_NETWARE)
-        else if (_kbhit())
 #else
 		else if (FD_ISSET(fileno(stdin),&readfds))
 #endif
@@ -1155,22 +786,14 @@ end:
 	if (con != NULL) SSL_free(con);
 	if (con2 != NULL) SSL_free(con2);
 	if (ctx != NULL) SSL_CTX_free(ctx);
-	if (cert)
-		X509_free(cert);
-	if (key)
-		EVP_PKEY_free(key);
-	if (pass)
-		OPENSSL_free(pass);
-	if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
-	if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
-	if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
+	if (cbuf != NULL) { memset(cbuf,0,BUFSIZZ); OPENSSL_free(cbuf); }
+	if (sbuf != NULL) { memset(sbuf,0,BUFSIZZ); OPENSSL_free(sbuf); }
 	if (bio_c_out != NULL)
 		{
 		BIO_free(bio_c_out);
 		bio_c_out=NULL;
 		}
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 
@@ -1178,16 +801,13 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 	{
 	X509 *peer=NULL;
 	char *p;
-	static const char *space="                ";
+	static char *space="                ";
 	char buf[BUFSIZ];
 	STACK_OF(X509) *sk;
 	STACK_OF(X509_NAME) *sk2;
 	SSL_CIPHER *c;
 	X509_NAME *xn;
 	int j,i;
-#ifndef OPENSSL_NO_COMP
-	const COMP_METHOD *comp, *expansion;
-#endif
 
 	if (full)
 		{
@@ -1202,10 +822,10 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			for (i=0; i<sk_X509_num(sk); i++)
 				{
 				X509_NAME_oneline(X509_get_subject_name(
-					sk_X509_value(sk,i)),buf,sizeof buf);
+					sk_X509_value(sk,i)),buf,BUFSIZ);
 				BIO_printf(bio,"%2d s:%s\n",i,buf);
 				X509_NAME_oneline(X509_get_issuer_name(
-					sk_X509_value(sk,i)),buf,sizeof buf);
+					sk_X509_value(sk,i)),buf,BUFSIZ);
 				BIO_printf(bio,"   i:%s\n",buf);
 				if (c_showcerts)
 					PEM_write_bio_X509(bio,sk_X509_value(sk,i));
@@ -1220,10 +840,10 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			if (!(c_showcerts && got_a_chain)) /* Redundant if we showed the whole chain */
 				PEM_write_bio_X509(bio,peer);
 			X509_NAME_oneline(X509_get_subject_name(peer),
-				buf,sizeof buf);
+				buf,BUFSIZ);
 			BIO_printf(bio,"subject=%s\n",buf);
 			X509_NAME_oneline(X509_get_issuer_name(peer),
-				buf,sizeof buf);
+				buf,BUFSIZ);
 			BIO_printf(bio,"issuer=%s\n",buf);
 			}
 		else
@@ -1245,7 +865,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			{
 			BIO_printf(bio,"---\nNo client certificate CA names sent\n");
 			}
-		p=SSL_get_shared_ciphers(s,buf,sizeof buf);
+		p=SSL_get_shared_ciphers(s,buf,BUFSIZ);
 		if (p != NULL)
 			{
 			/* This works only for SSL 2.  In later protocol
@@ -1290,19 +910,9 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 							 EVP_PKEY_bits(pktmp));
 		EVP_PKEY_free(pktmp);
 	}
-#ifndef OPENSSL_NO_COMP
-	comp=SSL_get_current_compression(s);
-	expansion=SSL_get_current_expansion(s);
-	BIO_printf(bio,"Compression: %s\n",
-		comp ? SSL_COMP_get_name(comp) : "NONE");
-	BIO_printf(bio,"Expansion: %s\n",
-		expansion ? SSL_COMP_get_name(expansion) : "NONE");
-#endif
 	SSL_SESSION_print(bio,SSL_get_session(s));
 	BIO_printf(bio,"---\n");
 	if (peer != NULL)
 		X509_free(peer);
-	/* flush, or debugging output gets mixed with http response */
-	(void)BIO_flush(bio);
 	}
 

apps/s_socket.c

@@ -66,7 +66,7 @@
    recursive header file inclusion, resulting in the compiler complaining
    that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
    is needed to have fileno() declared correctly...  So let's define u_int */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__U_INT)
+#if defined(VMS) && defined(__DECC) && !defined(__U_INT)
 #define __U_INT
 typedef unsigned int u_int;
 #endif
@@ -79,44 +79,28 @@ typedef unsigned int u_int;
 #include "s_apps.h"
 #include <openssl/ssl.h>
 
-#ifdef FLAT_INC
-#include "e_os.h"
-#else
-#include "../e_os.h"
-#endif
-
-#ifndef OPENSSL_NO_SOCK
-
-#if defined(OPENSSL_SYS_NETWARE) && defined(NETWARE_BSDSOCK)
-#include "netdb.h"
-#endif
-
 static struct hostent *GetHostByName(char *name);
-#if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
-static void ssl_sock_cleanup(void);
+#ifdef WINDOWS
+static void sock_cleanup(void);
 #endif
-static int ssl_sock_init(void);
-static int init_client_ip(int *sock,unsigned char ip[4], int port, int type);
-static int init_server(int *sock, int port, int type);
-static int init_server_long(int *sock, int port,char *ip, int type);
+static int sock_init(void);
+static int init_client_ip(int *sock,unsigned char ip[4], int port);
+static int init_server(int *sock, int port);
+static int init_server_long(int *sock, int port,char *ip);
 static int do_accept(int acc_sock, int *sock, char **host);
 static int host_ip(char *str, unsigned char ip[4]);
 
-#ifdef OPENSSL_SYS_WIN16
+#ifdef WIN16
 #define SOCKET_PROTOCOL	0 /* more microsoft stupidity */
 #else
 #define SOCKET_PROTOCOL	IPPROTO_TCP
 #endif
 
-#if defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
-static int wsa_init_done=0;
-#endif
-
-#ifdef OPENSSL_SYS_WINDOWS
+#ifdef WINDOWS
 static struct WSAData wsa_state;
 static int wsa_init_done=0;
 
-#ifdef OPENSSL_SYS_WIN16
+#ifdef WIN16
 static HWND topWnd=0;
 static FARPROC lpTopWndProc=NULL;
 static FARPROC lpTopHookProc=NULL;
@@ -132,7 +116,7 @@ static LONG FAR PASCAL topHookProc(HWND hwnd, UINT message, WPARAM wParam,
 		case WM_DESTROY:
 		case WM_CLOSE:
 			SetWindowLong(topWnd,GWL_WNDPROC,(LONG)lpTopWndProc);
-			ssl_sock_cleanup();
+			sock_cleanup();
 			break;
 			}
 		}
@@ -145,46 +129,30 @@ static BOOL CALLBACK enumproc(HWND hwnd,LPARAM lParam)
 	return(FALSE);
 	}
 
-#endif /* OPENSSL_SYS_WIN32 */
-#endif /* OPENSSL_SYS_WINDOWS */
+#endif /* WIN32 */
+#endif /* WINDOWS */
 
-#ifdef OPENSSL_SYS_WINDOWS
-static void ssl_sock_cleanup(void)
+#ifdef WINDOWS
+static void sock_cleanup(void)
 	{
 	if (wsa_init_done)
 		{
 		wsa_init_done=0;
-#ifndef OPENSSL_SYS_WINCE
 		WSACancelBlockingCall();
-#endif
-		WSACleanup();
-		}
-	}
-#elif defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
-static void sock_cleanup(void)
-    {
-    if (wsa_init_done)
-        {
-        wsa_init_done=0;
 		WSACleanup();
 		}
 	}
 #endif
 
-static int ssl_sock_init(void)
+static int sock_init(void)
 	{
-#ifdef WATT32
-	extern int _watt_do_exit;
-	_watt_do_exit = 0;
-	if (sock_init())
-		return (0);
-#elif defined(OPENSSL_SYS_WINDOWS)
+#ifdef WINDOWS
 	if (!wsa_init_done)
 		{
 		int err;
 	  
 #ifdef SIGINT
-		signal(SIGINT,(void (*)(int))ssl_sock_cleanup);
+		signal(SIGINT,(void (*)(int))sock_cleanup);
 #endif
 		wsa_init_done=1;
 		memset(&wsa_state,0,sizeof(wsa_state));
@@ -195,40 +163,19 @@ static int ssl_sock_init(void)
 			return(0);
 			}
 
-#ifdef OPENSSL_SYS_WIN16
+#ifdef WIN16
 		EnumTaskWindows(GetCurrentTask(),enumproc,0L);
 		lpTopWndProc=(FARPROC)GetWindowLong(topWnd,GWL_WNDPROC);
 		lpTopHookProc=MakeProcInstance((FARPROC)topHookProc,_hInstance);
 
 		SetWindowLong(topWnd,GWL_WNDPROC,(LONG)lpTopHookProc);
-#endif /* OPENSSL_SYS_WIN16 */
+#endif /* WIN16 */
 		}
-#elif defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
-   WORD wVerReq;
-   WSADATA wsaData;
-   int err;
-
-   if (!wsa_init_done)
-      {
-   
-# ifdef SIGINT
-      signal(SIGINT,(void (*)(int))sock_cleanup);
-# endif
-
-      wsa_init_done=1;
-      wVerReq = MAKEWORD( 2, 0 );
-      err = WSAStartup(wVerReq,&wsaData);
-      if (err != 0)
-         {
-         BIO_printf(bio_err,"unable to start WINSOCK2, error code=%d\n",err);
-         return(0);
-         }
-      }
-#endif /* OPENSSL_SYS_WINDOWS */
+#endif /* WINDOWS */
 	return(1);
 	}
 
-int init_client(int *sock, char *host, int port, int type)
+int init_client(int *sock, char *host, int port)
 	{
 	unsigned char ip[4];
 	short p=0;
@@ -238,16 +185,16 @@ int init_client(int *sock, char *host, int port, int type)
 		return(0);
 		}
 	if (p != 0) port=p;
-	return(init_client_ip(sock,ip,port,type));
+	return(init_client_ip(sock,ip,port));
 	}
 
-static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
+static int init_client_ip(int *sock, unsigned char ip[4], int port)
 	{
 	unsigned long addr;
 	struct sockaddr_in them;
 	int s,i;
 
-	if (!ssl_sock_init()) return(0);
+	if (!sock_init()) return(0);
 
 	memset((char *)&them,0,sizeof(them));
 	them.sin_family=AF_INET;
@@ -259,21 +206,12 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
 		((unsigned long)ip[3]);
 	them.sin_addr.s_addr=htonl(addr);
 
-	if (type == SOCK_STREAM)
-		s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
-	else /* ( type == SOCK_DGRAM) */
-		s=socket(AF_INET,SOCK_DGRAM,IPPROTO_UDP);
-			
+	s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
 	if (s == INVALID_SOCKET) { perror("socket"); return(0); }
 
-#ifndef OPENSSL_SYS_MPE
-	if (type == SOCK_STREAM)
-		{
-		i=0;
-		i=setsockopt(s,SOL_SOCKET,SO_KEEPALIVE,(char *)&i,sizeof(i));
-		if (i < 0) { perror("keepalive"); return(0); }
-		}
-#endif
+	i=0;
+	i=setsockopt(s,SOL_SOCKET,SO_KEEPALIVE,(char *)&i,sizeof(i));
+	if (i < 0) { perror("keepalive"); return(0); }
 
 	if (connect(s,(struct sockaddr *)&them,sizeof(them)) == -1)
 		{ close(s); perror("connect"); return(0); }
@@ -281,36 +219,30 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
 	return(1);
 	}
 
-int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, unsigned char *context), unsigned char *context)
+int do_server(int port, int *ret, int (*cb)(), char *context)
 	{
 	int sock;
-	char *name = NULL;
+	char *name;
 	int accept_socket;
 	int i;
 
-	if (!init_server(&accept_socket,port,type)) return(0);
+	if (!init_server(&accept_socket,port)) return(0);
 
 	if (ret != NULL)
 		{
 		*ret=accept_socket;
 		/* return(1);*/
 		}
-  	for (;;)
-  		{
-		if (type==SOCK_STREAM)
+	for (;;)
+		{
+		if (do_accept(accept_socket,&sock,&name) == 0)
 			{
-			if (do_accept(accept_socket,&sock,&name) == 0)
-				{
-				SHUTDOWN(accept_socket);
-				return(0);
-				}
+			SHUTDOWN(accept_socket);
+			return(0);
 			}
-		else
-			sock = accept_socket;
 		i=(*cb)(name,sock, context);
 		if (name != NULL) OPENSSL_free(name);
-		if (type==SOCK_STREAM)
-			SHUTDOWN2(sock);
+		SHUTDOWN2(sock);
 		if (i < 0)
 			{
 			SHUTDOWN2(accept_socket);
@@ -319,13 +251,13 @@ int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, uns
 		}
 	}
 
-static int init_server_long(int *sock, int port, char *ip, int type)
+static int init_server_long(int *sock, int port, char *ip)
 	{
 	int ret=0;
 	struct sockaddr_in server;
 	int s= -1,i;
 
-	if (!ssl_sock_init()) return(0);
+	if (!sock_init()) return(0);
 
 	memset((char *)&server,0,sizeof(server));
 	server.sin_family=AF_INET;
@@ -339,11 +271,7 @@ static int init_server_long(int *sock, int port, char *ip, int type)
 #else
 		memcpy(&server.sin_addr,ip,4);
 #endif
-	
-		if (type == SOCK_STREAM)
-			s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
-		else /* type == SOCK_DGRAM */
-			s=socket(AF_INET, SOCK_DGRAM,IPPROTO_UDP);
+	s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
 
 	if (s == INVALID_SOCKET) goto err;
 #if defined SOL_SOCKET && defined SO_REUSEADDR
@@ -355,13 +283,13 @@ static int init_server_long(int *sock, int port, char *ip, int type)
 #endif
 	if (bind(s,(struct sockaddr *)&server,sizeof(server)) == -1)
 		{
-#ifndef OPENSSL_SYS_WINDOWS
+#ifndef WINDOWS
 		perror("bind");
 #endif
 		goto err;
 		}
 	/* Make it 128 for linux */
-	if (type==SOCK_STREAM && listen(s,128) == -1) goto err;
+	if (listen(s,128) == -1) goto err;
 	i=0;
 	*sock=s;
 	ret=1;
@@ -373,9 +301,9 @@ err:
 	return(ret);
 	}
 
-static int init_server(int *sock, int port, int type)
+static int init_server(int *sock, int port)
 	{
-	return(init_server_long(sock, port, NULL, type));
+	return(init_server_long(sock, port, NULL));
 	}
 
 static int do_accept(int acc_sock, int *sock, char **host)
@@ -386,9 +314,9 @@ static int do_accept(int acc_sock, int *sock, char **host)
 	int len;
 /*	struct linger ling; */
 
-	if (!ssl_sock_init()) return(0);
+	if (!sock_init()) return(0);
 
-#ifndef OPENSSL_SYS_WINDOWS
+#ifndef WINDOWS
 redoit:
 #endif
 
@@ -402,7 +330,7 @@ redoit:
 	ret=accept(acc_sock,(struct sockaddr *)&from,(void *)&len);
 	if (ret == INVALID_SOCKET)
 		{
-#if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
+#ifdef WINDOWS
 		i=WSAGetLastError();
 		BIO_printf(bio_err,"accept error %d\n",i);
 #else
@@ -449,7 +377,7 @@ redoit:
 			perror("OPENSSL_malloc");
 			return(0);
 			}
-		BUF_strlcpy(*host,h1->h_name,strlen(h1->h_name)+1);
+		strcpy(*host,h1->h_name);
 
 		h2=GetHostByName(*host);
 		if (h2 == NULL)
@@ -516,7 +444,7 @@ static int host_ip(char *str, unsigned char ip[4])
 		{ /* do a gethostbyname */
 		struct hostent *he;
 
-		if (!ssl_sock_init()) return(0);
+		if (!sock_init()) return(0);
 
 		he=GetHostByName(str);
 		if (he == NULL)
@@ -597,12 +525,9 @@ static struct hostent *GetHostByName(char *name)
 		ret=gethostbyname(name);
 		if (ret == NULL) return(NULL);
 		/* else add to cache */
-		if(strlen(name) < sizeof ghbn_cache[0].name)
-			{
-			strcpy(ghbn_cache[lowi].name,name);
-			memcpy((char *)&(ghbn_cache[lowi].ent),ret,sizeof(struct hostent));
-			ghbn_cache[lowi].order=ghbn_miss+ghbn_hits;
-			}
+		strncpy(ghbn_cache[lowi].name,name,128);
+		memcpy((char *)&(ghbn_cache[lowi].ent),ret,sizeof(struct hostent));
+		ghbn_cache[lowi].order=ghbn_miss+ghbn_hits;
 		return(ret);
 		}
 	else
@@ -613,5 +538,3 @@ static struct hostent *GetHostByName(char *name)
 		return(ret);
 		}
 	}
-
-#endif

apps/s_time.c

@@ -67,25 +67,22 @@
 #include <stdlib.h>
 #include <string.h>
 
-#define USE_SOCKETS
-#include "apps.h"
-#ifdef OPENSSL_NO_STDIO
+#ifdef NO_STDIO
 #define APPS_WIN16
 #endif
+#define USE_SOCKETS
 #include <openssl/x509.h>
 #include <openssl/ssl.h>
 #include <openssl/pem.h>
+#include "apps.h"
 #include "s_apps.h"
 #include <openssl/err.h>
 #ifdef WIN32_STUFF
 #include "winmain.h"
 #include "wintext.h"
 #endif
-#if !defined(OPENSSL_SYS_MSDOS)
-#include OPENSSL_UNISTD
-#endif
 
-#if !defined(OPENSSL_SYS_NETWARE) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
+#if !defined(MSDOS) && (!defined(VMS) || defined(__DECC))
 #define TIMES
 #endif
 
@@ -101,14 +98,18 @@
    The __TMS macro will show if it was.  If it wasn't defined, we should
    undefine TIMES, since that tells the rest of the program how things
    should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
+#if defined(VMS) && defined(__DECC) && !defined(__TMS)
 #undef TIMES
 #endif
 
-#if !defined(TIMES) && !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_NETWARE)
+#ifndef TIMES
 #include <sys/timeb.h>
 #endif
 
+#ifdef _AIX
+#include <sys/select.h>
+#endif
+
 #if defined(sun) || defined(__ultrix)
 #define _POSIX_SOURCE
 #include <limits.h>
@@ -118,19 +119,11 @@
 /* The following if from times(3) man page.  It may need to be changed
 */
 #ifndef HZ
-# ifdef _SC_CLK_TCK
-#  define HZ ((double)sysconf(_SC_CLK_TCK))
-# else
-#  ifndef CLK_TCK
-#   ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
-#    define HZ	100.0
-#   else /* _BSD_CLK_TCK_ */
-#    define HZ ((double)_BSD_CLK_TCK_)
-#   endif
-#  else /* CLK_TCK */
-#   define HZ ((double)CLK_TCK)
-#  endif
-# endif
+#ifndef CLK_TCK
+#define HZ      100.0
+#else /* CLK_TCK */
+#define HZ ((double)CLK_TCK)
+#endif
 #endif
 
 #undef PROG
@@ -146,10 +139,6 @@
 #undef BUFSIZZ
 #define BUFSIZZ 1024*10
 
-#define MYBUFSIZ 1024*8
-
-#undef min
-#undef max
 #define min(a,b) (((a) < (b)) ? (a) : (b))
 #define max(a,b) (((a) > (b)) ? (a) : (b))
 
@@ -185,7 +174,7 @@ static int perform=0;
 #ifdef FIONBIO
 static int t_nbio=0;
 #endif
-#ifdef OPENSSL_SYS_WIN32
+#ifdef WIN32
 static int exitNow = 0;		/* Set when it's time to exit main */
 #endif
 
@@ -209,7 +198,7 @@ static void s_time_init(void)
 #ifdef FIONBIO
 	t_nbio=0;
 #endif
-#ifdef OPENSSL_SYS_WIN32
+#ifdef WIN32
 	exitNow = 0;		/* Set when it's time to exit main */
 #endif
 	}
@@ -322,19 +311,14 @@ static int parseArgs(int argc, char **argv)
 		{
 		if (--argc < 1) goto bad;
 		s_www_path= *(++argv);
-		if(strlen(s_www_path) > MYBUFSIZ-100)
-			{
-			BIO_printf(bio_err,"-www option too long\n");
-			badop=1;
-			}
 		}
 	else if(strcmp(*argv,"-bugs") == 0)
 	    st_bugs=1;
-#ifndef OPENSSL_NO_SSL2
+#ifndef NO_SSL2
 	else if(strcmp(*argv,"-ssl2") == 0)
 	    s_time_meth=SSLv2_client_method();
 #endif
-#ifndef OPENSSL_NO_SSL3
+#ifndef NO_SSL3
 	else if(strcmp(*argv,"-ssl3") == 0)
 	    s_time_meth=SSLv3_client_method();
 #endif
@@ -384,36 +368,6 @@ static double tm_Time_F(int s)
 		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
 		return((ret == 0.0)?1e-6:ret);
 	}
-#elif defined(OPENSSL_SYS_NETWARE)
-    static clock_t tstart,tend;
-
-    if (s == START)
-    {
-        tstart=clock();
-        return(0);
-    }
-    else
-    {
-        tend=clock();
-        ret=(double)((double)(tend)-(double)(tstart));
-        return((ret < 0.001)?0.001:ret);
-    }
-#elif defined(OPENSSL_SYS_VXWORKS)
-        {
-	static unsigned long tick_start, tick_end;
-
-	if( s == START )
-		{
-		tick_start = tickGet();
-		return 0;
-		}
-	else
-		{
-		tick_end = tickGet();
-		ret = (double)(tick_end - tick_start) / (double)sysClkRateGet();
-		return((ret == 0.0)?1e-6:ret);
-		}
-        }
 #else /* !times() */
 	static struct timeb tstart,tend;
 	long i;
@@ -452,11 +406,11 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
+#if !defined(NO_SSL2) && !defined(NO_SSL3)
 	s_time_meth=SSLv23_client_method();
-#elif !defined(OPENSSL_NO_SSL3)
+#elif !defined(NO_SSL3)
 	s_time_meth=SSLv3_client_method();
-#elif !defined(OPENSSL_NO_SSL2)
+#elif !defined(NO_SSL2)
 	s_time_meth=SSLv2_client_method();
 #endif
 
@@ -489,6 +443,7 @@ int MAIN(int argc, char **argv)
 
 	if (tm_cipher == NULL ) {
 		fprintf( stderr, "No CIPHER specified\n" );
+/*		EXIT(1); */
 	}
 
 	if (!(perform & 1)) goto next;
@@ -501,7 +456,7 @@ int MAIN(int argc, char **argv)
 	tm_Time_F(START);
 	for (;;)
 		{
-		if (finishtime < (long)time(NULL)) break;
+		if (finishtime < time(NULL)) break;
 #ifdef WIN32_STUFF
 
 		if( flushWinMsgs(0) == -1 )
@@ -516,7 +471,7 @@ int MAIN(int argc, char **argv)
 
 		if (s_www_path != NULL)
 			{
-			BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+			sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 			SSL_write(scon,buf,strlen(buf));
 			while ((i=SSL_read(scon,buf,sizeof(buf))) > 0)
 				bytes_read+=i;
@@ -552,9 +507,9 @@ int MAIN(int argc, char **argv)
 		}
 	totalTime += tm_Time_F(STOP); /* Add the time for this iteration */
 
-	i=(int)((long)time(NULL)-finishtime+maxTime);
+	i=(int)(time(NULL)-finishtime+maxTime);
 	printf( "\n\n%d connections in %.2fs; %.2f connections/user sec, bytes read %ld\n", nConn, totalTime, ((double)nConn/totalTime),bytes_read);
-	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,(long)time(NULL)-finishtime+maxTime,bytes_read/nConn);
+	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,time(NULL)-finishtime+maxTime,bytes_read/nConn);
 
 	/* Now loop and time connections using the same session id over and over */
 
@@ -571,7 +526,7 @@ next:
 
 	if (s_www_path != NULL)
 		{
-		BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+		sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 		SSL_write(scon,buf,strlen(buf));
 		while (SSL_read(scon,buf,sizeof(buf)) > 0)
 			;
@@ -586,7 +541,7 @@ next:
 	nConn = 0;
 	totalTime = 0.0;
 
-	finishtime=(long)time(NULL)+maxTime;
+	finishtime=time(NULL)+maxTime;
 
 	printf( "starting\n" );
 	bytes_read=0;
@@ -594,7 +549,7 @@ next:
 		
 	for (;;)
 		{
-		if (finishtime < (long)time(NULL)) break;
+		if (finishtime < time(NULL)) break;
 
 #ifdef WIN32_STUFF
 		if( flushWinMsgs(0) == -1 )
@@ -609,7 +564,7 @@ next:
 
 		if (s_www_path)
 			{
-			BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+			sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 			SSL_write(scon,buf,strlen(buf));
 			while ((i=SSL_read(scon,buf,sizeof(buf))) > 0)
 				bytes_read+=i;
@@ -644,7 +599,7 @@ next:
 
 
 	printf( "\n\n%d connections in %.2fs; %.2f connections/user sec, bytes read %ld\n", nConn, totalTime, ((double)nConn/totalTime),bytes_read);
-	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,(long)time(NULL)-finishtime+maxTime,bytes_read/nConn);
+	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,time(NULL)-finishtime+maxTime,bytes_read/nConn);
 
 	ret=0;
 end:
@@ -655,8 +610,7 @@ end:
 		SSL_CTX_free(tm_ctx);
 		tm_ctx=NULL;
 		}
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 /***********************************************************************

apps/server.pem

@@ -1,17 +1,17 @@
 issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
-subject= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Server test cert (512 bit)
+subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Server test cert (512 bit)
 -----BEGIN CERTIFICATE-----
-MIIB6TCCAVICAQYwDQYJKoZIhvcNAQEEBQAwWzELMAkGA1UEBhMCQVUxEzARBgNV
+MIIB6TCCAVICAQQwDQYJKoZIhvcNAQEEBQAwWzELMAkGA1UEBhMCQVUxEzARBgNV
 BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRswGQYD
-VQQDExJUZXN0IENBICgxMDI0IGJpdCkwHhcNMDAxMDE2MjIzMTAzWhcNMDMwMTE0
-MjIzMTAzWjBjMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDEaMBgG
+VQQDExJUZXN0IENBICgxMDI0IGJpdCkwHhcNOTgwNjI5MjM1MjQwWhcNMDAwNjI4
+MjM1MjQwWjBjMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDEaMBgG
 A1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxIzAhBgNVBAMTGlNlcnZlciB0ZXN0IGNl
 cnQgKDUxMiBiaXQpMFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBAJ+zw4Qnlf8SMVIP
 Fe9GEcStgOY2Ww/dgNdhjeD8ckUJNP5VZkVDTGiXav6ooKXfX3j/7tdkuD8Ey2//
-Kv7+ue0CAwEAATANBgkqhkiG9w0BAQQFAAOBgQCT0grFQeZaqYb5EYfk20XixZV4
-GmyAbXMftG1Eo7qGiMhYzRwGNWxEYojf5PZkYZXvSqZ/ZXHXa4g59jK/rJNnaVGM
-k+xIX8mxQvlV0n5O9PIha5BX5teZnkHKgL8aKKLKW1BK7YTngsfSzzaeame5iKfz
-itAE+OjGF+PFKbwX8Q==
+Kv7+ue0CAwEAATANBgkqhkiG9w0BAQQFAAOBgQCVvvfkGSe2GHgDFfmOua4Isjb9
+JVhImWMASiOClkZlMESDJjsszg/6+d/W+8TrbObhazpl95FivXBVucbj9dudh7AO
+IZu1h1MAPlyknc9Ud816vz3FejB4qqUoaXjnlkrIgEbr/un7jSS86WOe0hRhwHkJ
+FUGcPZf9ND22Etc+AQ==
 -----END CERTIFICATE-----
 -----BEGIN RSA PRIVATE KEY-----
 MIIBPAIBAAJBAJ+zw4Qnlf8SMVIPFe9GEcStgOY2Ww/dgNdhjeD8ckUJNP5VZkVD

apps/sess_id.c

@@ -69,7 +69,7 @@
 #undef PROG
 #define PROG	sess_id_main
 
-static const char *sess_id_usage[]={
+static char *sess_id_usage[]={
 "usage: sess_id args\n",
 "\n",
 " -inform arg     - input format - default PEM (DER or PEM)\n",
@@ -95,7 +95,7 @@ int MAIN(int argc, char **argv)
 	int informat,outformat;
 	char *infile=NULL,*outfile=NULL,*context=NULL;
 	int cert=0,noout=0,text=0;
-	const char **pp;
+	char **pp;
 
 	apps_startup();
 
@@ -156,7 +156,7 @@ int MAIN(int argc, char **argv)
 		{
 bad:
 		for (pp=sess_id_usage; (*pp != NULL); pp++)
-			BIO_printf(bio_err,"%s",*pp);
+			BIO_printf(bio_err,*pp);
 		goto end;
 		}
 
@@ -206,15 +206,7 @@ bad:
 			}
 
 		if (outfile == NULL)
-			{
 			BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
-			}
 		else
 			{
 			if (BIO_write_filename(out,outfile) <= 0)
@@ -241,7 +233,7 @@ bad:
 	if (!noout && !cert)
 		{
 		if 	(outformat == FORMAT_ASN1)
-			i=i2d_SSL_SESSION_bio(out,x);
+			i=(int)i2d_SSL_SESSION_bio(out,x);
 		else if (outformat == FORMAT_PEM)
 			i=PEM_write_bio_SSL_SESSION(out,x);
 		else	{
@@ -270,10 +262,9 @@ bad:
 		}
 	ret=0;
 end:
-	if (out != NULL) BIO_free_all(out);
+	if (out != NULL) BIO_free(out);
 	if (x != NULL) SSL_SESSION_free(x);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static SSL_SESSION *load_sess_id(char *infile, int format)

apps/smime.c

@@ -1,9 +1,9 @@
 /* smime.c */
 /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
+ * project 1999.
  */
 /* ====================================================================
- * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -64,13 +64,12 @@
 #include <openssl/crypto.h>
 #include <openssl/pem.h>
 #include <openssl/err.h>
-#include <openssl/x509_vfy.h>
-#include <openssl/x509v3.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG smime_main
+static X509_STORE *setup_verify(char *CAfile, char *CApath);
 static int save_certs(char *signerfile, STACK_OF(X509) *signers);
-static int smime_cb(int ok, X509_STORE_CTX *ctx);
 
 #define SMIME_OP	0x10
 #define SMIME_ENCRYPT	(1 | SMIME_OP)
@@ -82,16 +81,16 @@ static int smime_cb(int ok, X509_STORE_CTX *ctx);
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
-	{
+{
 	ENGINE *e = NULL;
 	int operation = 0;
 	int ret = 0;
 	char **args;
-	const char *inmode = "r", *outmode = "w";
+	char *inmode = "r", *outmode = "w";
 	char *infile = NULL, *outfile = NULL;
 	char *signerfile = NULL, *recipfile = NULL;
 	char *certfile = NULL, *keyfile = NULL, *contfile=NULL;
-	const EVP_CIPHER *cipher = NULL;
+	EVP_CIPHER *cipher = NULL;
 	PKCS7 *p7 = NULL;
 	X509_STORE *store = NULL;
 	X509 *cert = NULL, *recip = NULL, *signer = NULL;
@@ -106,72 +105,30 @@ int MAIN(int argc, char **argv)
 	char *inrand = NULL;
 	int need_rand = 0;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
-        int keyform = FORMAT_PEM;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
-
-	X509_VERIFY_PARAM *vpm = NULL;
 
 	args = argv + 1;
 	ret = 1;
 
-	apps_startup();
-
-	if (bio_err == NULL)
-		{
-		if ((bio_err = BIO_new(BIO_s_file())) != NULL)
-			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
-		}
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	while (!badarg && *args && *args[0] == '-')
-		{
-		if (!strcmp (*args, "-encrypt"))
-			operation = SMIME_ENCRYPT;
-		else if (!strcmp (*args, "-decrypt"))
-			operation = SMIME_DECRYPT;
-		else if (!strcmp (*args, "-sign"))
-			operation = SMIME_SIGN;
-		else if (!strcmp (*args, "-verify"))
-			operation = SMIME_VERIFY;
-		else if (!strcmp (*args, "-pk7out"))
-			operation = SMIME_PK7OUT;
-#ifndef OPENSSL_NO_DES
+	while (!badarg && *args && *args[0] == '-') {
+		if (!strcmp (*args, "-encrypt")) operation = SMIME_ENCRYPT;
+		else if (!strcmp (*args, "-decrypt")) operation = SMIME_DECRYPT;
+		else if (!strcmp (*args, "-sign")) operation = SMIME_SIGN;
+		else if (!strcmp (*args, "-verify")) operation = SMIME_VERIFY;
+		else if (!strcmp (*args, "-pk7out")) operation = SMIME_PK7OUT;
+#ifndef NO_DES
 		else if (!strcmp (*args, "-des3")) 
 				cipher = EVP_des_ede3_cbc();
 		else if (!strcmp (*args, "-des")) 
 				cipher = EVP_des_cbc();
 #endif
-#ifndef OPENSSL_NO_SEED
-		else if (!strcmp (*args, "-seed")) 
-				cipher = EVP_seed_cbc();
-#endif
-#ifndef OPENSSL_NO_RC2
+#ifndef NO_RC2
 		else if (!strcmp (*args, "-rc2-40")) 
 				cipher = EVP_rc2_40_cbc();
 		else if (!strcmp (*args, "-rc2-128")) 
 				cipher = EVP_rc2_cbc();
 		else if (!strcmp (*args, "-rc2-64")) 
 				cipher = EVP_rc2_64_cbc();
-#endif
-#ifndef OPENSSL_NO_AES
-		else if (!strcmp(*args,"-aes128"))
-				cipher = EVP_aes_128_cbc();
-		else if (!strcmp(*args,"-aes192"))
-				cipher = EVP_aes_192_cbc();
-		else if (!strcmp(*args,"-aes256"))
-				cipher = EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (!strcmp(*args,"-camellia128"))
-				cipher = EVP_camellia_128_cbc();
-		else if (!strcmp(*args,"-camellia192"))
-				cipher = EVP_camellia_192_cbc();
-		else if (!strcmp(*args,"-camellia256"))
-				cipher = EVP_camellia_256_cbc();
 #endif
 		else if (!strcmp (*args, "-text")) 
 				flags |= PKCS7_TEXT;
@@ -193,229 +150,116 @@ int MAIN(int argc, char **argv)
 				flags |= PKCS7_BINARY;
 		else if (!strcmp (*args, "-nosigs"))
 				flags |= PKCS7_NOSIGS;
-		else if (!strcmp (*args, "-nooldmime"))
-				flags |= PKCS7_NOOLDMIMETYPE;
-		else if (!strcmp (*args, "-crlfeol"))
-				flags |= PKCS7_CRLFEOL;
-		else if (!strcmp(*args,"-rand"))
-			{
-			if (args[1])
-				{
+		else if (!strcmp(*args,"-rand")) {
+			if (args[1]) {
 				args++;
 				inrand = *args;
-				}
-			else
-				badarg = 1;
+			} else badarg = 1;
 			need_rand = 1;
-			}
-#ifndef OPENSSL_NO_ENGINE
-		else if (!strcmp(*args,"-engine"))
-			{
-			if (args[1])
-				{
+		} else if (!strcmp(*args,"-engine")) {
+			if (args[1]) {
 				args++;
 				engine = *args;
-				}
-			else badarg = 1;
-			}
-#endif
-		else if (!strcmp(*args,"-passin"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp(*args,"-passin")) {
+			if (args[1]) {
 				args++;
 				passargin = *args;
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-to"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-to")) {
+			if (args[1]) {
 				args++;
 				to = *args;
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-from"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-from")) {
+			if (args[1]) {
 				args++;
 				from = *args;
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp (*args, "-subject"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-subject")) {
+			if (args[1]) {
 				args++;
 				subject = *args;
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-signer"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-signer")) {
+			if (args[1]) {
 				args++;
 				signerfile = *args;
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-recip"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-recip")) {
+			if (args[1]) {
 				args++;
 				recipfile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp (*args, "-inkey"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-inkey")) {
+			if (args[1]) {
 				args++;
 				keyfile = *args;
-				}
-			else
-				badarg = 1;
-		}
-		else if (!strcmp (*args, "-keyform"))
-			{
-			if (args[1])
-				{
-				args++;
-				keyform = str2fmt(*args);
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-certfile"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-certfile")) {
+			if (args[1]) {
 				args++;
 				certfile = *args;
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-CAfile"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-CAfile")) {
+			if (args[1]) {
 				args++;
 				CAfile = *args;
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-CApath"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-CApath")) {
+			if (args[1]) {
 				args++;
 				CApath = *args;
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-in"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-in")) {
+			if (args[1]) {
 				args++;
 				infile = *args;
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-inform"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-inform")) {
+			if (args[1]) {
 				args++;
 				informat = str2fmt(*args);
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-outform"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-outform")) {
+			if (args[1]) {
 				args++;
 				outformat = str2fmt(*args);
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-out"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-out")) {
+			if (args[1]) {
 				args++;
 				outfile = *args;
-				}
-			else
-				badarg = 1;
-			}
-		else if (!strcmp (*args, "-content"))
-			{
-			if (args[1])
-				{
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-content")) {
+			if (args[1]) {
 				args++;
 				contfile = *args;
-				}
-			else
-				badarg = 1;
-			}
-		else if (args_verify(&args, NULL, &badarg, bio_err, &vpm))
-			continue;
-		else
-			badarg = 1;
+			} else badarg = 1;
+		} else badarg = 1;
 		args++;
-		}
+	}
 
-
-	if (operation == SMIME_SIGN)
-		{
-		if (!signerfile)
-			{
+	if(operation == SMIME_SIGN) {
+		if(!signerfile) {
 			BIO_printf(bio_err, "No signer certificate specified\n");
 			badarg = 1;
-			}
+		}
 		need_rand = 1;
-		}
-	else if (operation == SMIME_DECRYPT)
-		{
-		if (!recipfile && !keyfile)
-			{
-			BIO_printf(bio_err, "No recipient certificate or key specified\n");
+	} else if(operation == SMIME_DECRYPT) {
+		if(!recipfile) {
+			BIO_printf(bio_err, "No recipient certificate and key specified\n");
 			badarg = 1;
-			}
 		}
-	else if (operation == SMIME_ENCRYPT)
-		{
-		if (!*args)
-			{
+	} else if(operation == SMIME_ENCRYPT) {
+		if(!*args) {
 			BIO_printf(bio_err, "No recipient(s) certificate(s) specified\n");
 			badarg = 1;
-			}
-		need_rand = 1;
 		}
-	else if (!operation)
-		badarg = 1;
+		need_rand = 1;
+	} else if(!operation) badarg = 1;
 
-	if (badarg)
-		{
+	if (badarg) {
 		BIO_printf (bio_err, "Usage smime [options] cert.pem ...\n");
 		BIO_printf (bio_err, "where options are\n");
 		BIO_printf (bio_err, "-encrypt       encrypt message\n");
@@ -423,25 +267,14 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-sign          sign message\n");
 		BIO_printf (bio_err, "-verify        verify signed message\n");
 		BIO_printf (bio_err, "-pk7out        output PKCS#7 structure\n");
-#ifndef OPENSSL_NO_DES
+#ifndef NO_DES
 		BIO_printf (bio_err, "-des3          encrypt with triple DES\n");
 		BIO_printf (bio_err, "-des           encrypt with DES\n");
 #endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf (bio_err, "-seed          encrypt with SEED\n");
-#endif
-#ifndef OPENSSL_NO_RC2
+#ifndef NO_RC2
 		BIO_printf (bio_err, "-rc2-40        encrypt with RC2-40 (default)\n");
 		BIO_printf (bio_err, "-rc2-64        encrypt with RC2-64\n");
 		BIO_printf (bio_err, "-rc2-128       encrypt with RC2-128\n");
-#endif
-#ifndef OPENSSL_NO_AES
-		BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
-		BIO_printf (bio_err, "               encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf (bio_err, "-camellia128, -camellia192, -camellia256\n");
-		BIO_printf (bio_err, "               encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf (bio_err, "-nointern      don't search certificates in message for signer\n");
 		BIO_printf (bio_err, "-nosigs        don't verify message signature\n");
@@ -456,7 +289,6 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-in file       input file\n");
 		BIO_printf (bio_err, "-inform arg    input format SMIME (default), PEM or DER\n");
 		BIO_printf (bio_err, "-inkey file    input private key (if not signer or recipient)\n");
-		BIO_printf (bio_err, "-keyform arg   input private key format (PEM or ENGINE)\n");
 		BIO_printf (bio_err, "-out file      output file\n");
 		BIO_printf (bio_err, "-outform arg   output format SMIME (default), PEM or DER\n");
 		BIO_printf (bio_err, "-content file  supply or override content for detached signature\n");
@@ -466,294 +298,217 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-text          include or delete text MIME headers\n");
 		BIO_printf (bio_err, "-CApath dir    trusted certificates directory\n");
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
-		BIO_printf (bio_err, "-crl_check     check revocation status of signer's certificate using CRLs\n");
-		BIO_printf (bio_err, "-crl_check_all check revocation status of signer's certificate chain using CRLs\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf (bio_err, "-engine e      use engine e, possibly a hardware device.\n");
-#endif
-		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,  "               the random number generator\n");
 		BIO_printf (bio_err, "cert.pem       recipient certificate(s) for encryption\n");
 		goto end;
+	}
+
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
-
-	if (!app_passwd(bio_err, passargin, NULL, &passin, NULL))
-		{
+	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
 		BIO_printf(bio_err, "Error getting password\n");
 		goto end;
-		}
+	}
 
-	if (need_rand)
-		{
+	if (need_rand) {
 		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 		if (inrand != NULL)
 			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
 				app_RAND_load_files(inrand));
-		}
+	}
 
 	ret = 2;
 
-	if (operation != SMIME_SIGN)
-		flags &= ~PKCS7_DETACHED;
+	if(operation != SMIME_SIGN) flags &= ~PKCS7_DETACHED;
 
-	if (operation & SMIME_OP)
-		{
-		if (flags & PKCS7_BINARY)
-			inmode = "rb";
-		if (outformat == FORMAT_ASN1)
-			outmode = "wb";
-		}
-	else
-		{
-		if (flags & PKCS7_BINARY)
-			outmode = "wb";
-		if (informat == FORMAT_ASN1)
-			inmode = "rb";
-		}
+	if(operation & SMIME_OP) {
+		if(flags & PKCS7_BINARY) inmode = "rb";
+		if(outformat == FORMAT_ASN1) outmode = "wb";
+	} else {
+		if(flags & PKCS7_BINARY) outmode = "wb";
+		if(informat == FORMAT_ASN1) inmode = "rb";
+	}
 
-	if (operation == SMIME_ENCRYPT)
-		{
-		if (!cipher)
-			{
-#ifndef OPENSSL_NO_RC2			
+	if(operation == SMIME_ENCRYPT) {
+		if (!cipher) {
+#ifndef NO_RC2			
 			cipher = EVP_rc2_40_cbc();
 #else
 			BIO_printf(bio_err, "No cipher selected\n");
 			goto end;
 #endif
-			}
+		}
 		encerts = sk_X509_new_null();
-		while (*args)
-			{
-			if (!(cert = load_cert(bio_err,*args,FORMAT_PEM,
-				NULL, e, "recipient certificate file")))
-				{
-#if 0				/* An appropriate message is already printed */
+		while (*args) {
+			if(!(cert = load_cert(bio_err,*args,FORMAT_PEM))) {
 				BIO_printf(bio_err, "Can't read recipient certificate file %s\n", *args);
-#endif
 				goto end;
-				}
+			}
 			sk_X509_push(encerts, cert);
 			cert = NULL;
 			args++;
-			}
 		}
+	}
 
-	if (signerfile && (operation == SMIME_SIGN))
-		{
-		if (!(signer = load_cert(bio_err,signerfile,FORMAT_PEM, NULL,
-			e, "signer certificate")))
-			{
-#if 0			/* An appropri message has already been printed */
+	if(signerfile && (operation == SMIME_SIGN)) {
+		if(!(signer = load_cert(bio_err,signerfile,FORMAT_PEM))) {
 			BIO_printf(bio_err, "Can't read signer certificate file %s\n", signerfile);
-#endif
 			goto end;
-			}
 		}
+	}
 
-	if (certfile)
-		{
-		if (!(other = load_certs(bio_err,certfile,FORMAT_PEM, NULL,
-			e, "certificate file")))
-			{
-#if 0			/* An appropriate message has already been printed */
+	if(certfile) {
+		if(!(other = load_certs(bio_err,certfile,FORMAT_PEM))) {
 			BIO_printf(bio_err, "Can't read certificate file %s\n", certfile);
-#endif
 			ERR_print_errors(bio_err);
 			goto end;
-			}
 		}
+	}
 
-	if (recipfile && (operation == SMIME_DECRYPT))
-		{
-		if (!(recip = load_cert(bio_err,recipfile,FORMAT_PEM,NULL,
-			e, "recipient certificate file")))
-			{
-#if 0			/* An appropriate message has alrady been printed */
+	if(recipfile && (operation == SMIME_DECRYPT)) {
+		if(!(recip = load_cert(bio_err,recipfile,FORMAT_PEM))) {
 			BIO_printf(bio_err, "Can't read recipient certificate file %s\n", recipfile);
-#endif
 			ERR_print_errors(bio_err);
 			goto end;
-			}
 		}
+	}
 
-	if (operation == SMIME_DECRYPT)
-		{
-		if (!keyfile)
-			keyfile = recipfile;
-		}
-	else if (operation == SMIME_SIGN)
-		{
-		if (!keyfile)
-			keyfile = signerfile;
-		}
-	else keyfile = NULL;
+	if(operation == SMIME_DECRYPT) {
+		if(!keyfile) keyfile = recipfile;
+	} else if(operation == SMIME_SIGN) {
+		if(!keyfile) keyfile = signerfile;
+	} else keyfile = NULL;
 
-	if (keyfile)
-		{
-		key = load_key(bio_err, keyfile, keyform, 0, passin, e,
-			       "signing key file");
-		if (!key)
+	if(keyfile) {
+		if(!(key = load_key(bio_err,keyfile, FORMAT_PEM, passin))) {
+			BIO_printf(bio_err, "Can't read recipient certificate file %s\n", keyfile);
+			ERR_print_errors(bio_err);
 			goto end;
 		}
+	}
 
-	if (infile)
-		{
-		if (!(in = BIO_new_file(infile, inmode)))
-			{
+	if (infile) {
+		if (!(in = BIO_new_file(infile, inmode))) {
 			BIO_printf (bio_err,
 				 "Can't open input file %s\n", infile);
 			goto end;
-			}
 		}
-	else
-		in = BIO_new_fp(stdin, BIO_NOCLOSE);
+	} else in = BIO_new_fp(stdin, BIO_NOCLOSE);
 
-	if (outfile)
-		{
-		if (!(out = BIO_new_file(outfile, outmode)))
-			{
+	if (outfile) {
+		if (!(out = BIO_new_file(outfile, outmode))) {
 			BIO_printf (bio_err,
 				 "Can't open output file %s\n", outfile);
 			goto end;
-			}
-		}
-	else
-		{
-		out = BIO_new_fp(stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		    out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
-
-	if (operation == SMIME_VERIFY)
-		{
-		if (!(store = setup_verify(bio_err, CAfile, CApath)))
-			goto end;
-		X509_STORE_set_verify_cb_func(store, smime_cb);
-		if (vpm)
-			X509_STORE_set1_param(store, vpm);
 		}
+	} else out = BIO_new_fp(stdout, BIO_NOCLOSE);
 
+	if(operation == SMIME_VERIFY) {
+		if(!(store = setup_verify(CAfile, CApath))) goto end;
+	}
 
 	ret = 3;
 
-	if (operation == SMIME_ENCRYPT)
+	if(operation == SMIME_ENCRYPT) {
 		p7 = PKCS7_encrypt(encerts, in, cipher, flags);
-	else if (operation == SMIME_SIGN)
-		{
-		/* If detached data and SMIME output enable partial
-		 * signing.
-		 */
-		if ((flags & PKCS7_DETACHED) && (outformat == FORMAT_SMIME))
-			flags |= PKCS7_STREAM;
+	} else if(operation == SMIME_SIGN) {
 		p7 = PKCS7_sign(signer, key, other, in, flags);
-		}
-	else
-		{
-		if (informat == FORMAT_SMIME) 
+		BIO_reset(in);
+	} else {
+		if(informat == FORMAT_SMIME) 
 			p7 = SMIME_read_PKCS7(in, &indata);
-		else if (informat == FORMAT_PEM) 
+		else if(informat == FORMAT_PEM) 
 			p7 = PEM_read_bio_PKCS7(in, NULL, NULL, NULL);
-		else if (informat == FORMAT_ASN1) 
+		else if(informat == FORMAT_ASN1) 
 			p7 = d2i_PKCS7_bio(in, NULL);
-		else
-			{
+		else {
 			BIO_printf(bio_err, "Bad input format for PKCS#7 file\n");
 			goto end;
-			}
+		}
 
-		if (!p7)
-			{
+		if(!p7) {
 			BIO_printf(bio_err, "Error reading S/MIME message\n");
 			goto end;
-			}
-		if (contfile)
-			{
+		}
+		if(contfile) {
 			BIO_free(indata);
-			if (!(indata = BIO_new_file(contfile, "rb")))
-				{
+			if(!(indata = BIO_new_file(contfile, "rb"))) {
 				BIO_printf(bio_err, "Can't read content file %s\n", contfile);
 				goto end;
-				}
 			}
 		}
+	}
 
-	if (!p7)
-		{
+	if(!p7) {
 		BIO_printf(bio_err, "Error creating PKCS#7 structure\n");
 		goto end;
-		}
+	}
 
 	ret = 4;
-	if (operation == SMIME_DECRYPT)
-		{
-		if (!PKCS7_decrypt(p7, key, recip, out, flags))
-			{
+	if(operation == SMIME_DECRYPT) {
+		if(!PKCS7_decrypt(p7, key, recip, out, flags)) {
 			BIO_printf(bio_err, "Error decrypting PKCS#7 structure\n");
 			goto end;
-			}
 		}
-	else if (operation == SMIME_VERIFY)
-		{
+	} else if(operation == SMIME_VERIFY) {
 		STACK_OF(X509) *signers;
-		if (PKCS7_verify(p7, other, store, indata, out, flags))
-			BIO_printf(bio_err, "Verification successful\n");
-		else
-			{
-			BIO_printf(bio_err, "Verification failure\n");
+		if(PKCS7_verify(p7, other, store, indata, out, flags)) {
+			BIO_printf(bio_err, "Verification Successful\n");
+		} else {
+			BIO_printf(bio_err, "Verification Failure\n");
 			goto end;
-			}
+		}
 		signers = PKCS7_get0_signers(p7, other, flags);
-		if (!save_certs(signerfile, signers))
-			{
+		if(!save_certs(signerfile, signers)) {
 			BIO_printf(bio_err, "Error writing signers to %s\n",
 								signerfile);
 			ret = 5;
 			goto end;
-			}
-		sk_X509_free(signers);
 		}
-	else if (operation == SMIME_PK7OUT)
+		sk_X509_free(signers);
+	} else if(operation == SMIME_PK7OUT) {
 		PEM_write_bio_PKCS7(out, p7);
-	else
-		{
-		if (to)
-			BIO_printf(out, "To: %s\n", to);
-		if (from)
-			BIO_printf(out, "From: %s\n", from);
-		if (subject)
-			BIO_printf(out, "Subject: %s\n", subject);
-		if (outformat == FORMAT_SMIME) 
+	} else {
+		if(to) BIO_printf(out, "To: %s\n", to);
+		if(from) BIO_printf(out, "From: %s\n", from);
+		if(subject) BIO_printf(out, "Subject: %s\n", subject);
+		if(outformat == FORMAT_SMIME) 
 			SMIME_write_PKCS7(out, p7, in, flags);
-		else if (outformat == FORMAT_PEM) 
+		else if(outformat == FORMAT_PEM) 
 			PEM_write_bio_PKCS7(out,p7);
-		else if (outformat == FORMAT_ASN1) 
+		else if(outformat == FORMAT_ASN1) 
 			i2d_PKCS7_bio(out,p7);
-		else
-			{
+		else {
 			BIO_printf(bio_err, "Bad output format for PKCS#7 file\n");
 			goto end;
-			}
 		}
+	}
 	ret = 0;
 end:
 	if (need_rand)
 		app_RAND_write_file(NULL, bio_err);
-	if (ret) ERR_print_errors(bio_err);
+	if(ret) ERR_print_errors(bio_err);
 	sk_X509_pop_free(encerts, X509_free);
 	sk_X509_pop_free(other, X509_free);
-	if (vpm)
-		X509_VERIFY_PARAM_free(vpm);
 	X509_STORE_free(store);
 	X509_free(cert);
 	X509_free(recip);
@@ -762,40 +517,51 @@ end:
 	PKCS7_free(p7);
 	BIO_free(in);
 	BIO_free(indata);
-	BIO_free_all(out);
-	if (passin) OPENSSL_free(passin);
+	BIO_free(out);
+	if(passin) OPENSSL_free(passin);
 	return (ret);
 }
 
+static X509_STORE *setup_verify(char *CAfile, char *CApath)
+{
+	X509_STORE *store;
+	X509_LOOKUP *lookup;
+	if(!(store = X509_STORE_new())) goto end;
+	lookup=X509_STORE_add_lookup(store,X509_LOOKUP_file());
+	if (lookup == NULL) goto end;
+	if (CAfile) {
+		if(!X509_LOOKUP_load_file(lookup,CAfile,X509_FILETYPE_PEM)) {
+			BIO_printf(bio_err, "Error loading file %s\n", CAfile);
+			goto end;
+		}
+	} else X509_LOOKUP_load_file(lookup,NULL,X509_FILETYPE_DEFAULT);
+		
+	lookup=X509_STORE_add_lookup(store,X509_LOOKUP_hash_dir());
+	if (lookup == NULL) goto end;
+	if (CApath) {
+		if(!X509_LOOKUP_add_dir(lookup,CApath,X509_FILETYPE_PEM)) {
+			BIO_printf(bio_err, "Error loading directory %s\n", CApath);
+			goto end;
+		}
+	} else X509_LOOKUP_add_dir(lookup,NULL,X509_FILETYPE_DEFAULT);
+
+	ERR_clear_error();
+	return store;
+	end:
+	X509_STORE_free(store);
+	return NULL;
+}
+
 static int save_certs(char *signerfile, STACK_OF(X509) *signers)
-	{
+{
 	int i;
 	BIO *tmp;
-	if (!signerfile)
-		return 1;
+	if(!signerfile) return 1;
 	tmp = BIO_new_file(signerfile, "w");
-	if (!tmp) return 0;
+	if(!tmp) return 0;
 	for(i = 0; i < sk_X509_num(signers); i++)
 		PEM_write_bio_X509(tmp, sk_X509_value(signers, i));
 	BIO_free(tmp);
 	return 1;
-	}
+}
 	
-
-/* Minimal callback just to output policy info (if any) */
-
-static int smime_cb(int ok, X509_STORE_CTX *ctx)
-	{
-	int error;
-
-	error = X509_STORE_CTX_get_error(ctx);
-
-	if ((error != X509_V_ERR_NO_EXPLICIT_POLICY)
-		&& ((error != X509_V_OK) || (ok != 2)))
-		return ok;
-
-	policies_print(NULL, ctx);
-
-	return ok;
-
-	}

apps/spkac.c

@@ -69,6 +69,7 @@
 #include <openssl/lhash.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	spkac_main
@@ -83,27 +84,21 @@ int MAIN(int argc, char **argv)
 	{
 	ENGINE *e = NULL;
 	int i,badops=0, ret = 1;
-	BIO *in = NULL,*out = NULL;
+	BIO *in = NULL,*out = NULL, *key = NULL;
 	int verify=0,noout=0,pubkey=0;
 	char *infile = NULL,*outfile = NULL,*prog;
 	char *passargin = NULL, *passin = NULL;
-	const char *spkac = "SPKAC", *spksect = "default";
-	char *spkstr = NULL;
+	char *spkac = "SPKAC", *spksect = "default", *spkstr = NULL;
 	char *challenge = NULL, *keyfile = NULL;
-	CONF *conf = NULL;
+	LHASH *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
 	EVP_PKEY *pkey = NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
 	if (!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	prog=argv[0];
 	argc--;
 	argv++;
@@ -144,13 +139,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			spksect= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -176,9 +169,7 @@ bad:
 		BIO_printf(bio_err," -noout         don't print SPKAC\n");
 		BIO_printf(bio_err," -pubkey        output public key\n");
 		BIO_printf(bio_err," -verify        verify SPKAC signature\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
-#endif
 		goto end;
 		}
 
@@ -188,34 +179,47 @@ bad:
 		goto end;
 	}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	if(keyfile) {
-		pkey = load_key(bio_err,
-				strcmp(keyfile, "-") ? keyfile : NULL,
-				FORMAT_PEM, 1, passin, e, "private key");
+		if(strcmp(keyfile, "-")) key = BIO_new_file(keyfile, "r");
+		else key = BIO_new_fp(stdin, BIO_NOCLOSE);
+		if(!key) {
+			BIO_printf(bio_err, "Error opening key file\n");
+			ERR_print_errors(bio_err);
+			goto end;
+		}
+		pkey = PEM_read_bio_PrivateKey(key, NULL, NULL, passin);
 		if(!pkey) {
+			BIO_printf(bio_err, "Error reading private key\n");
+			ERR_print_errors(bio_err);
 			goto end;
 		}
 		spki = NETSCAPE_SPKI_new();
 		if(challenge) ASN1_STRING_set(spki->spkac->challenge,
-						 challenge, (int)strlen(challenge));
+						 challenge, strlen(challenge));
 		NETSCAPE_SPKI_set_pubkey(spki, pkey);
 		NETSCAPE_SPKI_sign(spki, pkey, EVP_md5());
 		spkstr = NETSCAPE_SPKI_b64_encode(spki);
 
 		if (outfile) out = BIO_new_file(outfile, "w");
-		else {
-			out = BIO_new_fp(stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			    out = BIO_push(tmpbio, out);
-			}
-#endif
-		}
+		else out = BIO_new_fp(stdout, BIO_NOCLOSE);
 
 		if(!out) {
 			BIO_printf(bio_err, "Error opening output file\n");
@@ -239,16 +243,15 @@ bad:
 		goto end;
 	}
 
-	conf = NCONF_new(NULL);
-	i = NCONF_load_bio(conf, in, NULL);
+	conf = CONF_load_bio(NULL, in, NULL);
 
-	if(!i) {
+	if(!conf) {
 		BIO_printf(bio_err, "Error parsing config file\n");
 		ERR_print_errors(bio_err);
 		goto end;
 	}
 
-	spkstr = NCONF_get_string(conf, spksect, spkac);
+	spkstr = CONF_get_string(conf, spksect, spkac);
 		
 	if(!spkstr) {
 		BIO_printf(bio_err, "Can't find SPKAC called \"%s\"\n", spkac);
@@ -265,15 +268,7 @@ bad:
 	}
 
 	if (outfile) out = BIO_new_file(outfile, "w");
-	else {
-		out = BIO_new_fp(stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		    out = BIO_push(tmpbio, out);
-		}
-#endif
-	}
+	else out = BIO_new_fp(stdout, BIO_NOCLOSE);
 
 	if(!out) {
 		BIO_printf(bio_err, "Error opening output file\n");
@@ -297,12 +292,12 @@ bad:
 	ret = 0;
 
 end:
-	NCONF_free(conf);
+	CONF_free(conf);
 	NETSCAPE_SPKI_free(spki);
 	BIO_free(in);
-	BIO_free_all(out);
+	BIO_free(out);
+	BIO_free(key);
 	EVP_PKEY_free(pkey);
 	if(passin) OPENSSL_free(passin);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/testdsa.h

@@ -3,18 +3,6 @@
 DSA *get_dsa512(void );
 DSA *get_dsa1024(void );
 DSA *get_dsa2048(void );
-static unsigned char dsa512_priv[] = {
-	0x65,0xe5,0xc7,0x38,0x60,0x24,0xb5,0x89,0xd4,0x9c,0xeb,0x4c,
-	0x9c,0x1d,0x7a,0x22,0xbd,0xd1,0xc2,0xd2,
-	};
-static unsigned char dsa512_pub[] = {
-	0x00,0x95,0xa7,0x0d,0xec,0x93,0x68,0xba,0x5f,0xf7,0x5f,0x07,
-	0xf2,0x3b,0xad,0x6b,0x01,0xdc,0xbe,0xec,0xde,0x04,0x7a,0x3a,
-	0x27,0xb3,0xec,0x49,0xfd,0x08,0x43,0x3d,0x7e,0xa8,0x2c,0x5e,
-	0x7b,0xbb,0xfc,0xf4,0x6e,0xeb,0x6c,0xb0,0x6e,0xf8,0x02,0x12,
-	0x8c,0x38,0x5d,0x83,0x56,0x7d,0xee,0x53,0x05,0x3e,0x24,0x84,
-	0xbe,0xba,0x0a,0x6b,0xc8,
-	};
 static unsigned char dsa512_p[]={
 	0x9D,0x1B,0x69,0x8E,0x26,0xDB,0xF2,0x2B,0x11,0x70,0x19,0x86,
 	0xF6,0x19,0xC8,0xF8,0x19,0xF2,0x18,0x53,0x94,0x46,0x06,0xD0,
@@ -41,34 +29,14 @@ DSA *get_dsa512()
 	DSA *dsa;
 
 	if ((dsa=DSA_new()) == NULL) return(NULL);
-	dsa->priv_key=BN_bin2bn(dsa512_priv,sizeof(dsa512_priv),NULL);
-	dsa->pub_key=BN_bin2bn(dsa512_pub,sizeof(dsa512_pub),NULL);
 	dsa->p=BN_bin2bn(dsa512_p,sizeof(dsa512_p),NULL);
 	dsa->q=BN_bin2bn(dsa512_q,sizeof(dsa512_q),NULL);
 	dsa->g=BN_bin2bn(dsa512_g,sizeof(dsa512_g),NULL);
-	if ((dsa->priv_key == NULL) || (dsa->pub_key == NULL) || (dsa->p == NULL) ||
-				(dsa->q == NULL) || (dsa->g == NULL))
+	if ((dsa->p == NULL) || (dsa->q == NULL) || (dsa->g == NULL))
 		return(NULL);
 	return(dsa);
 	}
 
-static unsigned char dsa1024_priv[]={
-	0x7d,0x21,0xda,0xbb,0x62,0x15,0x47,0x36,0x07,0x67,0x12,0xe8,
-	0x8c,0xaa,0x1c,0xcd,0x38,0x12,0x61,0x18,
-	};
-static unsigned char dsa1024_pub[]={
-	0x3c,0x4e,0x9c,0x2a,0x7f,0x16,0xc1,0x25,0xeb,0xac,0x78,0x63,
-	0x90,0x14,0x8c,0x8b,0xf4,0x68,0x43,0x3c,0x2d,0xee,0x65,0x50,
-	0x7d,0x9c,0x8f,0x8c,0x8a,0x51,0xd6,0x11,0x2b,0x99,0xaf,0x1e,
-	0x90,0x97,0xb5,0xd3,0xa6,0x20,0x25,0xd6,0xfe,0x43,0x02,0xd5,
-	0x91,0x7d,0xa7,0x8c,0xdb,0xc9,0x85,0xa3,0x36,0x48,0xf7,0x68,
-	0xaa,0x60,0xb1,0xf7,0x05,0x68,0x3a,0xa3,0x3f,0xd3,0x19,0x82,
-	0xd8,0x82,0x7a,0x77,0xfb,0xef,0xf4,0x15,0x0a,0xeb,0x06,0x04,
-	0x7f,0x53,0x07,0x0c,0xbc,0xcb,0x2d,0x83,0xdb,0x3e,0xd1,0x28,
-	0xa5,0xa1,0x31,0xe0,0x67,0xfa,0x50,0xde,0x9b,0x07,0x83,0x7e,
-	0x2c,0x0b,0xc3,0x13,0x50,0x61,0xe5,0xad,0xbd,0x36,0xb8,0x97,
-	0x4e,0x40,0x7d,0xe8,0x83,0x0d,0xbc,0x4b
-	};
 static unsigned char dsa1024_p[]={
 	0xA7,0x3F,0x6E,0x85,0xBF,0x41,0x6A,0x29,0x7D,0xF0,0x9F,0x47,
 	0x19,0x30,0x90,0x9A,0x09,0x1D,0xDA,0x6A,0x33,0x1E,0xC5,0x3D,
@@ -105,45 +73,14 @@ DSA *get_dsa1024()
 	DSA *dsa;
 
 	if ((dsa=DSA_new()) == NULL) return(NULL);
-	dsa->priv_key=BN_bin2bn(dsa1024_priv,sizeof(dsa1024_priv),NULL);
-	dsa->pub_key=BN_bin2bn(dsa1024_pub,sizeof(dsa1024_pub),NULL);
 	dsa->p=BN_bin2bn(dsa1024_p,sizeof(dsa1024_p),NULL);
 	dsa->q=BN_bin2bn(dsa1024_q,sizeof(dsa1024_q),NULL);
 	dsa->g=BN_bin2bn(dsa1024_g,sizeof(dsa1024_g),NULL);
-	if ((dsa->priv_key == NULL) || (dsa->pub_key == NULL) || (dsa->p == NULL) ||
-				(dsa->q == NULL) || (dsa->g == NULL))
+	if ((dsa->p == NULL) || (dsa->q == NULL) || (dsa->g == NULL))
 		return(NULL);
 	return(dsa);
 	}
 
-static unsigned char dsa2048_priv[]={
-	0x32,0x67,0x92,0xf6,0xc4,0xe2,0xe2,0xe8,0xa0,0x8b,0x6b,0x45,
-	0x0c,0x8a,0x76,0xb0,0xee,0xcf,0x91,0xa7,
-	};
-static unsigned char dsa2048_pub[]={
-	0x17,0x8f,0xa8,0x11,0x84,0x92,0xec,0x83,0x47,0xc7,0x6a,0xb0,
-	0x92,0xaf,0x5a,0x20,0x37,0xa3,0x64,0x79,0xd2,0xd0,0x3d,0xcd,
-	0xe0,0x61,0x88,0x88,0x21,0xcc,0x74,0x5d,0xce,0x4c,0x51,0x47,
-	0xf0,0xc5,0x5c,0x4c,0x82,0x7a,0xaf,0x72,0xad,0xb9,0xe0,0x53,
-	0xf2,0x78,0xb7,0xf0,0xb5,0x48,0x7f,0x8a,0x3a,0x18,0xd1,0x9f,
-	0x8b,0x7d,0xa5,0x47,0xb7,0x95,0xab,0x98,0xf8,0x7b,0x74,0x50,
-	0x56,0x8e,0x57,0xf0,0xee,0xf5,0xb7,0xba,0xab,0x85,0x86,0xf9,
-	0x2b,0xef,0x41,0x56,0xa0,0xa4,0x9f,0xb7,0x38,0x00,0x46,0x0a,
-	0xa6,0xf1,0xfc,0x1f,0xd8,0x4e,0x85,0x44,0x92,0x43,0x21,0x5d,
-	0x6e,0xcc,0xc2,0xcb,0x26,0x31,0x0d,0x21,0xc4,0xbd,0x8d,0x24,
-	0xbc,0xd9,0x18,0x19,0xd7,0xdc,0xf1,0xe7,0x93,0x50,0x48,0x03,
-	0x2c,0xae,0x2e,0xe7,0x49,0x88,0x5f,0x93,0x57,0x27,0x99,0x36,
-	0xb4,0x20,0xab,0xfc,0xa7,0x2b,0xf2,0xd9,0x98,0xd7,0xd4,0x34,
-	0x9d,0x96,0x50,0x58,0x9a,0xea,0x54,0xf3,0xee,0xf5,0x63,0x14,
-	0xee,0x85,0x83,0x74,0x76,0xe1,0x52,0x95,0xc3,0xf7,0xeb,0x04,
-	0x04,0x7b,0xa7,0x28,0x1b,0xcc,0xea,0x4a,0x4e,0x84,0xda,0xd8,
-	0x9c,0x79,0xd8,0x9b,0x66,0x89,0x2f,0xcf,0xac,0xd7,0x79,0xf9,
-	0xa9,0xd8,0x45,0x13,0x78,0xb9,0x00,0x14,0xc9,0x7e,0x22,0x51,
-	0x86,0x67,0xb0,0x9f,0x26,0x11,0x23,0xc8,0x38,0xd7,0x70,0x1d,
-	0x15,0x8e,0x4d,0x4f,0x95,0x97,0x40,0xa1,0xc2,0x7e,0x01,0x18,
-	0x72,0xf4,0x10,0xe6,0x8d,0x52,0x16,0x7f,0xf2,0xc9,0xf8,0x33,
-	0x8b,0x33,0xb7,0xce,
-	};
 static unsigned char dsa2048_p[]={
 	0xA0,0x25,0xFA,0xAD,0xF4,0x8E,0xB9,0xE5,0x99,0xF3,0x5D,0x6F,
 	0x4F,0x83,0x34,0xE2,0x7E,0xCF,0x6F,0xBF,0x30,0xAF,0x6F,0x81,
@@ -202,13 +139,10 @@ DSA *get_dsa2048()
 	DSA *dsa;
  
 	if ((dsa=DSA_new()) == NULL) return(NULL);
-	dsa->priv_key=BN_bin2bn(dsa2048_priv,sizeof(dsa2048_priv),NULL);
-	dsa->pub_key=BN_bin2bn(dsa2048_pub,sizeof(dsa2048_pub),NULL);
 	dsa->p=BN_bin2bn(dsa2048_p,sizeof(dsa2048_p),NULL);
 	dsa->q=BN_bin2bn(dsa2048_q,sizeof(dsa2048_q),NULL);
 	dsa->g=BN_bin2bn(dsa2048_g,sizeof(dsa2048_g),NULL);
-	if ((dsa->priv_key == NULL) || (dsa->pub_key == NULL) || (dsa->p == NULL) ||
-				(dsa->q == NULL) || (dsa->g == NULL))
+	if ((dsa->p == NULL) || (dsa->q == NULL) || (dsa->g == NULL))
 		return(NULL);
 	return(dsa);
 	}

apps/timeouts.h

@@ -1,67 +0,0 @@
-/* apps/timeouts.h */
-/* 
- * DTLS implementation written by Nagendra Modadugu
- * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.  
- */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef INCLUDED_TIMEOUTS_H
-#define INCLUDED_TIMEOUTS_H
-
-/* numbers in us */
-#define DGRAM_RCV_TIMEOUT         250000
-#define DGRAM_SND_TIMEOUT         250000
-
-#endif /* ! INCLUDED_TIMEOUTS_H */

apps/verify.c

@@ -65,31 +65,29 @@
 #include <openssl/x509.h>
 #include <openssl/x509v3.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	verify_main
 
 static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx);
-static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e);
+static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose);
 static STACK_OF(X509) *load_untrusted(char *file);
-static int v_verbose=0, vflags = 0;
+static int v_verbose=0, issuer_checks = 0;
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
 	ENGINE *e = NULL;
-	int i,ret=1, badarg = 0;
+	int i,ret=1;
 	int purpose = -1;
 	char *CApath=NULL,*CAfile=NULL;
 	char *untfile = NULL, *trustfile = NULL;
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
-	X509_VERIFY_PARAM *vpm = NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
@@ -103,9 +101,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	argc--;
 	argv++;
 	for (;;)
@@ -122,12 +117,18 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				CAfile= *(++argv);
 				}
-			else if (args_verify(&argv, &argc, &badarg, bio_err,
-									&vpm))
+			else if (strcmp(*argv,"-purpose") == 0)
 				{
-				if (badarg)
+				X509_PURPOSE *xptmp;
+				if (argc-- < 1) goto end;
+				i = X509_PURPOSE_get_by_sname(*(++argv));
+				if(i < 0)
+					{
+					BIO_printf(bio_err, "unrecognized purpose\n");
 					goto end;
-				continue;
+					}
+				xptmp = X509_PURPOSE_get0(i);
+				purpose = X509_PURPOSE_get_id(xptmp);
 				}
 			else if (strcmp(*argv,"-untrusted") == 0)
 				{
@@ -139,15 +140,15 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
-#ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
 				if (--argc < 1) goto end;
 				engine= *(++argv);
 				}
-#endif
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
+			else if (strcmp(*argv,"-issuer_checks") == 0)
+				issuer_checks=1;
 			else if (strcmp(*argv,"-verbose") == 0)
 				v_verbose=1;
 			else if (argv[0][0] == '-')
@@ -161,12 +162,23 @@ int MAIN(int argc, char **argv)
 			break;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
-
-	if (vpm)
-		X509_STORE_set1_param(cert_ctx, vpm);
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
 
 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
@@ -208,18 +220,14 @@ int MAIN(int argc, char **argv)
 		}
 	}
 
-	if (argc < 1) check(cert_ctx, NULL, untrusted, trusted, purpose, e);
+	if (argc < 1) check(cert_ctx, NULL, untrusted, trusted, purpose);
 	else
 		for (i=0; i<argc; i++)
-			check(cert_ctx,argv[i], untrusted, trusted, purpose, e);
+			check(cert_ctx,argv[i], untrusted, trusted, purpose);
 	ret=0;
 end:
 	if (ret == 1) {
-		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check]");
-#ifndef OPENSSL_NO_ENGINE
-		BIO_printf(bio_err," [-engine e]");
-#endif
-		BIO_printf(bio_err," cert1 cert2 ...\n");
+		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-engine e] cert1 cert2 ...\n");
 		BIO_printf(bio_err,"recognized usages:\n");
 		for(i = 0; i < X509_PURPOSE_get_count(); i++) {
 			X509_PURPOSE *ptmp;
@@ -228,23 +236,45 @@ end:
 								X509_PURPOSE_get0_name(ptmp));
 		}
 	}
-	if (vpm) X509_VERIFY_PARAM_free(vpm);
 	if (cert_ctx != NULL) X509_STORE_free(cert_ctx);
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
-static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e)
+static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose)
 	{
 	X509 *x=NULL;
+	BIO *in=NULL;
 	int i=0,ret=0;
 	X509_STORE_CTX *csc;
 
-	x = load_cert(bio_err, file, FORMAT_PEM, NULL, e, "certificate file");
-	if (x == NULL)
+	in=BIO_new(BIO_s_file());
+	if (in == NULL)
+		{
+		ERR_print_errors(bio_err);
 		goto end;
+		}
+
+	if (file == NULL)
+		BIO_set_fp(in,stdin,BIO_NOCLOSE);
+	else
+		{
+		if (BIO_read_filename(in,file) <= 0)
+			{
+			perror(file);
+			goto end;
+			}
+		}
+
+	x=PEM_read_bio_X509(in,NULL,NULL,NULL);
+	if (x == NULL)
+		{
+		fprintf(stdout,"%s: unable to load certificate file\n",
+			(file == NULL)?"stdin":file);
+		ERR_print_errors(bio_err);
+		goto end;
+		}
 	fprintf(stdout,"%s: ",(file == NULL)?"stdin":file);
 
 	csc = X509_STORE_CTX_new();
@@ -253,14 +283,11 @@ static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X
 		ERR_print_errors(bio_err);
 		goto end;
 		}
-	X509_STORE_set_flags(ctx, vflags);
-	if(!X509_STORE_CTX_init(csc,ctx,x,uchain))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
+	X509_STORE_CTX_init(csc,ctx,x,uchain);
 	if(tchain) X509_STORE_CTX_trusted_stack(csc, tchain);
 	if(purpose >= 0) X509_STORE_CTX_set_purpose(csc, purpose);
+	if(issuer_checks)
+		X509_STORE_CTX_set_flags(csc, X509_V_FLAG_CB_ISSUER_CHECK);
 	i=X509_verify_cert(csc);
 	X509_STORE_CTX_free(csc);
 
@@ -274,6 +301,7 @@ end:
 	else
 		ERR_print_errors(bio_err);
 	if (x != NULL) X509_free(x);
+	if (in != NULL) BIO_free(in);
 
 	return(ret);
 	}
@@ -330,13 +358,9 @@ static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 
 	if (!ok)
 		{
-		if (ctx->current_cert)
-			{
-			X509_NAME_oneline(
-				X509_get_subject_name(ctx->current_cert),buf,
-				sizeof buf);
-			printf("%s\n",buf);
-			}
+		X509_NAME_oneline(
+				X509_get_subject_name(ctx->current_cert),buf,256);
+		printf("%s\n",buf);
 		printf("error %d at %d depth lookup:%s\n",ctx->error,
 			ctx->error_depth,
 			X509_verify_cert_error_string(ctx->error));
@@ -348,21 +372,10 @@ static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
 		/* Continue after extension errors too */
 		if (ctx->error == X509_V_ERR_INVALID_CA) ok=1;
-		if (ctx->error == X509_V_ERR_INVALID_NON_CA) ok=1;
 		if (ctx->error == X509_V_ERR_PATH_LENGTH_EXCEEDED) ok=1;
 		if (ctx->error == X509_V_ERR_INVALID_PURPOSE) ok=1;
 		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
-		if (ctx->error == X509_V_ERR_CRL_HAS_EXPIRED) ok=1;
-		if (ctx->error == X509_V_ERR_CRL_NOT_YET_VALID) ok=1;
-		if (ctx->error == X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION) ok=1;
-
-		if (ctx->error == X509_V_ERR_NO_EXPLICIT_POLICY)
-			policies_print(NULL, ctx);
-		return ok;
-
 		}
-	if ((ctx->error == X509_V_OK) && (ok == 2))
-		policies_print(NULL, ctx);
 	if (!v_verbose)
 		ERR_clear_error();
 	return(ok);