This commit was manufactured by cvs2svn to create tag 'AFTER_COMPAQ_PATCH'.

where necessary to the main trunk (0.9.8-dev).

This does not include rearrangements and work I've been doing, that'll
come in the next bunch of commits to this branch.  This set of changes
can't be expected to work on any VMS system, there are changes in here
that are very specific to Compaq's building system.

This set of changes will be surrounded by the tags BEFORE_COMPAQ_PATCH
and AFTER_COMPAQ_PATCH.

Configure

@@ -144,6 +144,7 @@ my %table=(
 "debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-ulf",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT:::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -mcpu=i486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
+"debug-steve-linux-pseudo64",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DOPENSSL_NO_ASM -g -mcpu=i486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:SIXTY_FOUR_BIT::dlfcn",
 "debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wid-clash-31 -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wid-clash-31 -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "dist",		"cc:-O::(unknown)::::::",
@@ -198,7 +199,7 @@ my %table=(
 "linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT:::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::::",
 # it's a real mess with -mcpu=ultrasparc option under Linux, but
 # -Wa,-Av8plus should do the trick no matter what.
-"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # !!!Folowing can't be even tested yet!!!
 #    We have to wait till 64-bit glibc for SPARC is operational!!!
 #"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT:ULTRASPARC::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
@@ -373,6 +374,7 @@ my %table=(
 "linux-pentium",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ppro",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-k6",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mcpu=k6 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-pentium","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-linux-ppro","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
@@ -434,7 +436,7 @@ my %table=(
 "aix43-gcc",  "gcc:-O3 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
 
 #
-# Cray T90 (SDSC)
+# Cray T90 and similar (SDSC)
 # It's Big-endian, but the algorithms work properly when B_ENDIAN is NOT
 # defined.  The T90 ints and longs are 8 bytes long, and apparently the
 # B_ENDIAN code assumes 4 byte ints.  Fortunately, the non-B_ENDIAN and
@@ -444,7 +446,10 @@ my %table=(
 #'Taking the address of a bit field is not allowed. '
 #'An expression with bit field exists as the operand of "sizeof" '
 # (written by Wayne Schroeder <schroede@SDSC.EDU>)
-"cray-t90-cc", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::(unknown):CRAY::SIXTY_FOUR_BIT_LONG DES_INT:::",
+#
+# j90 is considered the base machine type for unicos machines,
+# so this configuration is now called "cray-j90" ...
+"cray-j90", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::(unknown):CRAY::SIXTY_FOUR_BIT_LONG DES_INT:::",
 
 #
 # Cray T3E (Research Center Juelich, beckman@acl.lanl.gov)
@@ -514,10 +519,17 @@ my %table=(
 ##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::(unknown):::::::",
 
 # Some OpenBSD from Bob Beck <beck@obtuse.com>
-"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenBSD-x86",  "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenBSD",      "gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenBSD-mips","gcc:-O2 -DL_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-alpha",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-i386",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-m68k",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-m88k",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-mips",		"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-powerpc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-sparc64",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-vax",		"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-hppa",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 ##### MacOS X (a.k.a. Rhapsody or Darwin) setup
 "rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
@@ -912,11 +924,11 @@ my $bn_ops = $fields[$idx_bn_ops];
 my $bn_obj = $fields[$idx_bn_obj];
 my $des_obj = $fields[$idx_des_obj];
 my $bf_obj = $fields[$idx_bf_obj];
-my $md5_obj = $fields[$idx_md5_obj];
-my $sha1_obj = $fields[$idx_sha1_obj];
+$md5_obj = $fields[$idx_md5_obj];
+$sha1_obj = $fields[$idx_sha1_obj];
 my $cast_obj = $fields[$idx_cast_obj];
 my $rc4_obj = $fields[$idx_rc4_obj];
-my $rmd160_obj = $fields[$idx_rmd160_obj];
+$rmd160_obj = $fields[$idx_rmd160_obj];
 my $rc5_obj = $fields[$idx_rc5_obj];
 my $dso_scheme = $fields[$idx_dso_scheme];
 my $shared_target = $fields[$idx_shared_target];

FAQ

@@ -29,6 +29,7 @@ OpenSSL  -  Frequently Asked Questions
 * Why can't I use OpenSSL certificates with SSL client authentication?
 * Why does my browser give a warning about a mismatched hostname?
 * How do I install a CA certificate into a browser?
+* Why is OpenSSL x509 DN output not conformant to RFC2253?
 
 [BUILD] Questions about building and testing OpenSSL
 
@@ -59,7 +60,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.6c was released on December 21st, 2001.
+OpenSSL 0.9.6d was released on May 9, 2002.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -343,6 +344,13 @@ DO NOT DO THIS! This command will give away your CAs private key and
 reduces its security to zero: allowing anyone to forge certificates in
 whatever name they choose.
 
+* Why is OpenSSL x509 DN output not conformant to RFC2253?
+
+The ways to print out the oneline format of the DN (Distinguished Name) have
+been extended in version 0.9.7 of OpenSSL. Using the new X509_NAME_print_ex()
+interface, the "-nameopt" option could be introduded. See the manual
+page of the "openssl x509" commandline tool for details. The old behaviour
+has however been left as default for the sake of compatibility.
 
 [BUILD] =======================================================================
 

INSTALL.W32

@@ -6,15 +6,15 @@
  of this is tested on Win32 but it may also work in Win 3.1 with some
  modification.
 
- You need Perl for Win32.  Unless you will build on CygWin32, you will need
+ You need Perl for Win32.  Unless you will build on Cygwin, you will need
  ActiveState Perl, available from http://www.activestate.com/ActivePerl.
- For CygWin32 users, there's more info in the CygWin32 section.
+ For Cygwin users, there's more info in the Cygwin section.
 
  and one of the following C compilers:
 
   * Visual C++
   * Borland C
-  * GNU C (Mingw32 or Cygwin32)
+  * GNU C (Mingw32 or Cygwin)
 
  If you want to compile in the assembly language routines with Visual C++ then
  you will need an assembler. This is worth doing because it will result in
@@ -81,7 +81,7 @@
 
  There are various changes you can make to the Win32 compile environment. By
  default the library is not compiled with debugging symbols. If you add 'debug'
- to the mk1mk.pl lines in the do_* batch file then debugging symbols will be
+ to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
  compiled in.
 
  The default Win32 environment is to leave out any Windows NT specific
@@ -112,10 +112,10 @@
  * Compiler installation:
 
    Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/
-   gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. GNU make is at
-   <ftp://agnes.dida.physik.uni-essen.de/home/janjaap/mingw32/binaries/
-   make-3.76.1.zip>. Install both of them in C:\egcs-1.1.2 and run
-   C:\egcs-1.1.2\mingw32.bat to set the PATH.
+   gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. Extract it
+   to a directory such as C:\gcc-2.95.2 and add c:\gcc-2.95.2\bin to
+   the PATH environment variable in "System Properties"; or edit and
+   run C:\gcc-2.95.2\mingw32.bat to set the PATH.
 
  * Compile OpenSSL:
 
@@ -137,30 +137,30 @@
    > cd out
    > ..\ms\test
 
- GNU C (CygWin32)
- ---------------
+ GNU C (Cygwin)
+ --------------
 
- CygWin32 provides a bash shell and GNU tools environment running on
+ Cygwin provides a bash shell and GNU tools environment running on
  NT 4.0, Windows 9x and Windows 2000. Consequently, a make of OpenSSL
- with CygWin is closer to a GNU bash environment such as Linux rather
+ with Cygwin is closer to a GNU bash environment such as Linux rather
  than other W32 makes that are based on a single makefile approach.
- CygWin32 implements Posix/Unix calls through cygwin1.dll, and is
+ Cygwin implements Posix/Unix calls through cygwin1.dll, and is
  contrasted to Mingw32 which links dynamically to msvcrt.dll or
  crtdll.dll.
 
- To build OpenSSL using CygWin32:
+ To build OpenSSL using Cygwin:
 
- * Install CygWin32 (see http://sourceware.cygnus.com/cygwin)
+ * Install Cygwin (see http://sourceware.cygnus.com/cygwin)
 
  * Install Perl and ensure it is in the path (recent Cygwin perl 
    (version 5.6.1-2 of the latter has been reported to work) or
    ActivePerl)
 
- * Run the CygWin bash shell
+ * Run the Cygwin bash shell
 
  * $ tar zxvf openssl-x.x.x.tar.gz
    $ cd openssl-x.x.x
-   $ ./Configure no-threads CygWin32
+   $ ./config
    [...]
    $ make
    [...]
@@ -169,26 +169,26 @@
 
  This will create a default install in /usr/local/ssl.
 
- CygWin32 Notes:
+ Cygwin Notes:
 
  "make test" and normal file operations may fail in directories
- mounted as text (i.e. mount -t c:\somewhere /home) due to CygWin
+ mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
  stripping of carriage returns. To avoid this ensure that a binary
  mount is used, e.g. mount -b c:\somewhere /home.
 
- As of version 1.1.1 CygWin32 is relatively unstable in its handling
+ As of version 1.1.1 Cygwin is relatively unstable in its handling
  of cr/lf issues. These make procedures succeeded with versions 1.1 and
  the snapshot 20000524 (Slow!).
 
- "bc" is not provided in the CygWin32 distribution.  This causes a
+ "bc" is not provided in the Cygwin distribution.  This causes a
  non-fatal error in "make test" but is otherwise harmless.  If
- desired, GNU bc can be built with CygWin32 without change.
+ desired, GNU bc can be built with Cygwin without change.
 
 
  Installation
  ------------
 
- If you used the CygWin procedure above, you have already installed and
+ If you used the Cygwin procedure above, you have already installed and
  can skip this section.  For all other procedures, there's currently no real
  installation procedure for Win32.  There are, however, some suggestions:
 

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

Makefile.org

@@ -266,6 +266,7 @@ do_gnu-shared:
 	( set -x; ${CC} ${SHARED_LDFLAGS} \
 		-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
 	libs="$$libs -l$$i"; \
@@ -292,6 +293,7 @@ do_darwin-shared:
 do_cygwin-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 	( set -x; ${CC}  -shared -o cyg$$i.dll \
+		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--out-implib,lib$$i.dll.a \
 		-Wl,--no-whole-archive $$libs ) || exit 1; \
@@ -653,7 +655,7 @@ tar:
 
 tar-snap:
 	@$(TAR) $(TARFLAGS) -cvf - \
-		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \! -name '*test' \! -name '.#*' | sort` |\
+		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
 	tardy --user_number=0  --user_name=openssl \
 	      --group_number=0 --group_name=openssl \
 	      --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
@@ -695,8 +697,8 @@ install: all install_docs
 			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
 			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
-		fi \
-	done
+		fi; \
+	done;
 	@if [ -n "$(SHARED_LIBS)" ]; then \
 		tmp="$(SHARED_LIBS)"; \
 		for i in $${tmp:-x}; \
@@ -713,7 +715,7 @@ install: all install_docs
 					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
 					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
 				fi ); \
-			fi \
+			fi; \
 		done; \
 		(	here="`pwd`"; \
 			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \

NEWS

@@ -8,11 +8,44 @@
   Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.7:
 
       o New library section OCSP.
-      o Complete haul-over of the ASN.1 library section.
+      o Complete rewrite of ASN1 code.
+      o CRL checking in verify code and openssl utility.
+      o Extension copying in 'ca' utility.
+      o Flexible display options in 'ca' utility.
+      o Provisional support for international characters with UTF8.
       o Support for external crypto devices ('engine') is no longer
         a separate distribution.
+      o New elliptic curve library section.
+      o New AES (Rijndael) library section.
+      o Change DES API to clean up the namespace (some applications link also
+        against libdes providing similar functions having the same name).
+        Provide macros for backward compatibility (will be removed in the
+        future).
+      o Unifiy handling of cryptographic algorithms (software and
+        engine) to be available via EVP routines for asymmetric and
+        symmetric ciphers.
+      o NCONF: new configuration handling routines.
+      o Change API to use more 'const' modifiers to improve error checking
+        and help optimizers.
+      o Finally remove references to RSAref.
+      o Reworked parts of the BIGNUM code.
+      o Support for new engines: Broadcom ubsec, Accelerated Encryption
+        Processing, IBM 4758.
+      o PRNG: query at more locations for a random device, automatic query for
+        EGD style random sources at several locations.
+      o SSL/TLS: allow optional cipher choice according to server's preference.
+      o SSL/TLS: allow server to explicitly set new session ids.
+      o SSL/TLS: support Kerberos cipher suites (RFC2712).
+      o SSL/TLS: allow more precise control of renegotiations and sessions.
+      o SSL/TLS: add callback to retrieve SSL/TLS messages.
+      o SSL/TLS: add draft AES ciphersuites (disabled unless explicitly requested).
 
-  Changes between OpenSSL 0.9.6b and OpenSSL 0.9.6c:
+  Major changes between OpenSSL 0.9.6c and OpenSSL 0.9.6d:
+
+      o Various SSL/TLS library bugfixes.
+      o Fix DH parameter generation for 'non-standard' generators.
+
+  Major changes between OpenSSL 0.9.6b and OpenSSL 0.9.6c:
 
       o Various SSL/TLS library bugfixes.
       o BIGNUM library fixes.
@@ -25,7 +58,7 @@
         Broadcom and Cryptographic Appliance's keyserver
         [in 0.9.6c-engine release].
 
-  Changes between OpenSSL 0.9.6a and OpenSSL 0.9.6b:
+  Major changes between OpenSSL 0.9.6a and OpenSSL 0.9.6b:
 
       o Security fix: PRNG improvements.
       o Security fix: RSA OAEP check.

README

@@ -1,5 +1,5 @@
 
- OpenSSL 0.9.8-dev 24 Sep 2000
+ OpenSSL 0.9.8-dev XX xxx XXXX
 
  Copyright (c) 1998-2002 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson

STATUS

@@ -1,10 +1,11 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2002/02/13 10:21:25 $
+  ______________                           $Date: 2002/05/16 10:01:53 $
 
   DEVELOPMENT STATE
 
     o  OpenSSL 0.9.7:  Under development...
+    o  OpenSSL 0.9.6d: Released on May        9th, 2002
     o  OpenSSL 0.9.6c: Released on December  21st, 2001
     o  OpenSSL 0.9.6b: Released on July       9th, 2001
     o  OpenSSL 0.9.6a: Released on April      5th, 2001
@@ -17,10 +18,12 @@
     o  OpenSSL 0.9.2b: Released on March     22th, 1999
     o  OpenSSL 0.9.1c: Released on December  23th, 1998
 
+  [See also http://www.openssl.org/support/rt2.html]
+
   RELEASE SHOWSTOPPERS
 
-    o BIGNUM library failures on 64-bit platforms (0.9.7-dev):
-      - BN_mod_mul verificiation (bc) fails for solaris64-sparcv9-cc
+    o BN_mod_mul verification fails for mips3-sgi-irix
+      unless configured with no-asm
 
   AVAILABLE PATCHES
 
@@ -49,28 +52,15 @@
 
   NEEDS PATCH
 
-    o  An (optional) countermeasure against the predictable-IV CBC
-       weakness in SSL/TLS should be added; see
-       http://www.openssl.org/~bodo/tls-cbc.txt
-
-    o  All 'openssl' subprograms taking '-des' and '-des3' options should
-       include AES support (0.9.7-dev)
-
-    o  'openssl speed' should include AES support (0.9.7-dev)
-
     o  apps/ca.c: "Sign the certificate?" - "n" creates empty certificate file
 
-    o  OpenSSL_0_9_6-stable:
-       #include <openssl/e_os.h> in exported header files is illegal since
-       e_os.h is suitable only for library-internal use.
-
-    o  Whenever strncpy is used, make sure the resulting string is NULL-terminated
-       or an error is reported
-
     o  "OpenSSL STATUS" is never up-to-date.
 
   OPEN ISSUES
 
+    o  Do we want the EVP API changes in 0.9.7?
+       Can compatibility be improved?
+
     o  The Makefile hierarchy and build mechanism is still not a round thing:
 
        1. The config vs. Configure scripts
@@ -95,22 +85,6 @@
                     which apparently is not flexible enough to generate
                     libcrypto)
 
-
-    o  The perl/ stuff needs a major overhaul. Currently it's
-       totally obsolete. Either we clean it up and enhance it to be up-to-date
-       with the C code or we also could replace it with the really nice
-       Net::SSLeay package we can find under
-       http://www.neuronio.pt/SSLeay.pm.html.  Ralf uses this package for a
-       longer time and it works fine and is a nice Perl module. Best would be
-       to convince the author to work for the OpenSSL project and create a
-       Net::OpenSSL or Crypt::OpenSSL package out of it and maintains it for
-       us.
-
-       Status: Ralf thinks we should both contact the author of Net::SSLeay
-               and look how much effort it is to bring Eric's perl/ stuff up
-               to date.
-               Paul +1
-
   WISHES
 
     o  Add variants of DH_generate_parameters() and BN_generate_prime() [etc?]

TABLE

@@ -1,4 +1,3 @@
-Output of `Configure TABLE':
 
 *** BC-16
 $cc           = bcc
@@ -367,7 +366,7 @@ $unistd       =
 $thread_cflag = (unknown)
 $sys_id       = 
 $lflags       = 
-$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL
+$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL
 $bn_obj       = 
 $des_obj      = 
 $bf_obj       = 
@@ -408,14 +407,62 @@ $shared_ldflag =
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 
-*** OpenBSD-mips
+*** OpenBSD-hppa
 $cc           = gcc
-$cflags       = -O2 -DL_ENDIAN
+$cflags       = -DTERMIOS -O3 -fomit-frame-pointer
 $unistd       = 
 $thread_cflag = (unknown)
 $sys_id       = 
-$lflags       = BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR
-$bn_ops       = 
+$lflags       = 
+$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= bsd-gcc-shared
+$shared_cflag = -fPIC
+$shared_ldflag = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$shared_extension = 
+$ranlib       = 
+
+*** OpenBSD-i386
+$cc           = gcc
+$cflags       = -DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer
+$unistd       = 
+$thread_cflag = (unknown)
+$sys_id       = 
+$lflags       = 
+$bn_ops       = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
+$bn_obj       = asm/bn86-out.o asm/co86-out.o
+$des_obj      = asm/dx86-out.o asm/yx86-out.o
+$bf_obj       = asm/bx86-out.o
+$md5_obj      = asm/mx86-out.o
+$sha1_obj     = asm/sx86-out.o
+$cast_obj     = asm/cx86-out.o
+$rc4_obj      = asm/rx86-out.o
+$rmd160_obj   = asm/rm86-out.o
+$rc5_obj      = asm/r586-out.o
+$dso_scheme   = dlfcn
+$shared_target= bsd-gcc-shared
+$shared_cflag = -fPIC
+$shared_ldflag = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+
+*** OpenBSD-m68k
+$cc           = gcc
+$cflags       = -DTERMIOS -O3 -fomit-frame-pointer
+$unistd       = 
+$thread_cflag = (unknown)
+$sys_id       = 
+$lflags       = 
+$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL
 $bn_obj       = 
 $des_obj      = 
 $bf_obj       = 
@@ -432,23 +479,143 @@ $shared_ldflag =
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 
-*** OpenBSD-x86
+*** OpenBSD-m88k
 $cc           = gcc
-$cflags       = -DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486
+$cflags       = -DTERMIOS -O3 -fomit-frame-pointer
 $unistd       = 
 $thread_cflag = (unknown)
 $sys_id       = 
 $lflags       = 
-$bn_ops       = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
-$bn_obj       = asm/bn86-out.o asm/co86-out.o
-$des_obj      = asm/dx86-out.o asm/yx86-out.o
-$bf_obj       = asm/bx86-out.o
-$md5_obj      = asm/mx86-out.o
-$sha1_obj     = asm/sx86-out.o
-$cast_obj     = asm/cx86-out.o
-$rc4_obj      = asm/rx86-out.o
-$rmd160_obj   = asm/rm86-out.o
-$rc5_obj      = asm/r586-out.o
+$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= bsd-gcc-shared
+$shared_cflag = -fPIC
+$shared_ldflag = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+
+*** OpenBSD-mips
+$cc           = gcc
+$cflags       = -DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer
+$unistd       = 
+$thread_cflag = (unknown)
+$sys_id       = 
+$lflags       = 
+$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= bsd-gcc-shared
+$shared_cflag = -fPIC
+$shared_ldflag = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+
+*** OpenBSD-powerpc
+$cc           = gcc
+$cflags       = -DTERMIOS -O3 -fomit-frame-pointer
+$unistd       = 
+$thread_cflag = (unknown)
+$sys_id       = 
+$lflags       = 
+$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= bsd-gcc-shared
+$shared_cflag = -fPIC
+$shared_ldflag = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+
+*** OpenBSD-sparc
+$cc           = gcc
+$cflags       = -DTERMIOS -O3 -fomit-frame-pointer
+$unistd       = 
+$thread_cflag = (unknown)
+$sys_id       = 
+$lflags       = 
+$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= bsd-gcc-shared
+$shared_cflag = -fPIC
+$shared_ldflag = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+
+*** OpenBSD-sparc64
+$cc           = gcc
+$cflags       = -DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer
+$unistd       = 
+$thread_cflag = (unknown)
+$sys_id       = 
+$lflags       = 
+$bn_ops       = SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= bsd-gcc-shared
+$shared_cflag = -fPIC
+$shared_ldflag = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+
+*** OpenBSD-vax
+$cc           = gcc
+$cflags       = -DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer
+$unistd       = 
+$thread_cflag = (unknown)
+$sys_id       = 
+$lflags       = 
+$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
 $dso_scheme   = dlfcn
 $shared_target= bsd-gcc-shared
 $shared_cflag = -fPIC
@@ -1056,14 +1223,14 @@ $shared_ldflag =
 $shared_extension = 
 $ranlib       = 
 
-*** cray-t3e
+*** cray-j90
 $cc           = cc
 $cflags       = -DBIT_FIELD_LIMITS -DTERMIOS
 $unistd       = 
 $thread_cflag = (unknown)
 $sys_id       = CRAY
 $lflags       = 
-$bn_ops       = SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT
+$bn_ops       = SIXTY_FOUR_BIT_LONG DES_INT
 $bn_obj       = 
 $des_obj      = 
 $bf_obj       = 
@@ -1080,14 +1247,14 @@ $shared_ldflag =
 $shared_extension = 
 $ranlib       = 
 
-*** cray-t90-cc
+*** cray-t3e
 $cc           = cc
 $cflags       = -DBIT_FIELD_LIMITS -DTERMIOS
 $unistd       = 
 $thread_cflag = (unknown)
 $sys_id       = CRAY
 $lflags       = 
-$bn_ops       = SIXTY_FOUR_BIT_LONG DES_INT
+$bn_ops       = SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT
 $bn_obj       = 
 $des_obj      = 
 $bf_obj       = 
@@ -1416,6 +1583,30 @@ $shared_ldflag =
 $shared_extension = 
 $ranlib       = 
 
+*** debug-linux-pentium
+$cc           = gcc
+$cflags       = -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentium -Wall
+$unistd       = 
+$thread_cflag = -D_REENTRANT
+$sys_id       = 
+$lflags       = -ldl
+$bn_ops       = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
+$bn_obj       = asm/bn86-elf.o asm/co86-elf.o
+$des_obj      = asm/dx86-elf.o asm/yx86-elf.o
+$bf_obj       = asm/bx86-elf.o
+$md5_obj      = asm/mx86-elf.o
+$sha1_obj     = asm/sx86-elf.o
+$cast_obj     = asm/cx86-elf.o
+$rc4_obj      = asm/rx86-elf.o
+$rmd160_obj   = asm/rm86-elf.o
+$rc5_obj      = asm/r586-elf.o
+$dso_scheme   = dlfcn
+$shared_target= 
+$shared_cflag = 
+$shared_ldflag = 
+$shared_extension = 
+$ranlib       = 
+
 *** debug-linux-ppro
 $cc           = gcc
 $cflags       = -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentiumpro -Wall
@@ -2825,10 +3016,10 @@ $cast_obj     =
 $rc4_obj      = 
 $rmd160_obj   = 
 $rc5_obj      = 
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
-$shared_ldflag = 
+$dso_scheme   = dlfcn
+$shared_target= linux-shared
+$shared_cflag = -fPIC
+$shared_ldflag = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $shared_extension = 
 $ranlib       = 
 
@@ -3695,3 +3886,27 @@ $shared_cflag = -Kpic
 $shared_ldflag = 
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
+
+*** vxworks-ppc405
+$cc           = ccppc
+$cflags       = -g -msoft-float -mlongcall -DCPU=PPC405 -I$(WIND_BASE)/target/h
+$unistd       = 
+$thread_cflag = 
+$sys_id       = VXWORKS
+$lflags       = -r
+$bn_ops       = 
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = 
+$shared_target= 
+$shared_cflag = 
+$shared_ldflag = 
+$shared_extension = 
+$ranlib       = 

VMS/cert_tool/hostaddr.c

@@ -0,0 +1,477 @@
+
+#ifdef VMS
+#pragma module HOSTADDR "X-1"
+
+/*
+**
+** Copyright (c) 2000 Compaq Computer Corporation
+** COMPAQ Registered in U.S. Patent and Trademark Office.
+**
+** Confidential computer software. Valid license from Compaq or
+** authorized sublicensor required for possession, use or copying.
+** Consistent with FAR 12.211 and 12.212, Commercial Computer Software,
+** Computer Software Documentation, and Technical Data for Commercial
+** Items are licensed to the U.S. Government under vendor's standard
+** commercial license.
+**
+*/
+
+/*
+**++
+**
+**  FACILITY:  Apache Web Server
+**
+**  ABSTRACT:
+**
+**	This program determine the hostaddr of the default node or of
+**	a given hostname.
+**
+**	The command line syntax is:
+**
+**	    HOSTADDR [-l log-name] [-s sym-name] [host-name]
+**
+**	where:
+**
+**	    -l log-name	    specifies an optional logical name to receive hostname.
+**
+**	    -c sym-name	    specifies an optional symbol name to receive hostname.
+**
+**	    host-name	    specifies an optional host name to resolve.
+**
+**  AUTHOR:  Matthew Doremus			CREATION DATE:  07-Jul-2000
+**
+**  Modification History:
+**
+**	X-1	Matthew Doremus				07-Jul-2000
+**		Initial development
+**
+**--
+**
+**  Compile/Link instructions:
+**
+**	OpenVMS Alpha/VAX:
+**	    $ CC HOSTADDR+SYS$LIBRARY:SYS$LIB_C/LIBRARY
+**	    $ LINK HOSTADDR
+**
+*/
+
+/*
+** Define __NEW_STARLET if it's not already defined
+*/
+#ifndef __NEW_STARLET
+#define __NEW_STARLET
+#define __NEW_STARLET_SET
+#endif
+
+/*
+** Include the necessary header files
+*/
+#include <lib$routines>
+#include <libclidef>
+#include <descrip>
+#include <stdlib>
+#include <string>
+#include <stdio>
+#include <netdb>
+#include <in>
+
+/*
+** Undefine __NEW_STARLET if we had defined it
+*/
+#ifndef __NEW_STARLET_SET
+#undef  __NEW_STARLET_SET
+#undef  __NEW_STARLET
+#endif
+
+/*
+** Option Data Structure
+*/
+typedef struct _opt_data {
+    char		*log_name;
+    char		*sym_name;
+    char		*host_name; 
+    } OPT_DATA;
+
+/*
+** Local Routine Prototypes
+*/
+static void 
+ParseCmdLine (
+    int,
+    char *[],
+    OPT_DATA *);
+
+static void
+SetLogName (
+    char *,
+    char *);
+
+static void
+SetSymName (
+    char *,
+    char *);
+
+static void 
+Usage ();
+
+/*
+**
+**  main - Main processing routine for the HOSTADDR utility
+**
+**  Functional Description:
+**
+**	This routine controls overall program execution.
+**
+**  Usage:
+**
+**      main argc, argv, envp
+**
+**  Formal parameters:
+**
+**      argc 		- (IN) argument count
+**      argv         	- (IN) address of an argument array 
+**      envp         	- (IN) address of an environment string 
+**
+**  Implicit Parameters:
+**
+**      None
+**
+**  Routine Value:
+**
+**      None
+**
+**  Side Effects:
+**
+**      None
+**
+*/
+int
+main (
+    int		argc,
+    char	*argv[],
+    char	*envp[]
+    )
+{
+struct in_addr *addr_ptr;
+char hostname[512+1];
+struct hostent *hp;
+OPT_DATA OptData;
+char *hostaddr;
+int addr_max,
+    i;
+
+/*
+** Parse the command line
+*/
+ParseCmdLine (argc, argv, &OptData);
+
+/*
+** If no host name was given, then use gethostname otherwise
+** use the host name given.
+*/
+if (! OptData.host_name)
+    {
+    if (gethostname (hostname, sizeof (hostname) - 1))
+        {
+        perror ("gethostname");
+        exit (1);
+        }
+    }
+else
+    strcpy (hostname, OptData.host_name);
+
+/*
+** Get the host address using gethostbyname
+*/
+if (! (hp = gethostbyname (hostname)))
+    {
+    perror ("gethostbyname");
+    exit (1);
+    }
+
+/*
+** Format the host address(es) into a comma separated list
+*/
+addr_max = hp->h_length / sizeof (struct in_addr);
+hostaddr = malloc ((addr_max * (15 + 1)) + 1);
+addr_ptr = (struct in_addr *) hp->h_addr;
+for (i = 0; i < addr_max; i++)
+    {
+    if (i > 0)
+	strcat (hostaddr, ",");
+    addr_ptr = addr_ptr + (i * sizeof (struct in_addr));
+    sprintf (hostaddr + strlen (hostaddr), "%d.%d.%d.%d",
+	addr_ptr->s_net, addr_ptr->s_host, 
+	addr_ptr->s_lh, addr_ptr->s_impno);
+    }
+
+/*
+** Define a logical name if one was provided
+*/
+if (OptData.log_name)
+    SetLogName (OptData.log_name, hostaddr);
+
+/*
+** Define a symbol name if one was provided
+*/
+if (OptData.sym_name)
+    SetSymName (OptData.sym_name, hostaddr);
+
+/*
+** print the host address if no logical or symbol name was provided
+*/
+if (! OptData.log_name && ! OptData.sym_name)
+    printf ("%s\n", hostaddr);
+
+}
+
+/*
+**
+**  ParseCmdLine - Parse the command line options
+**
+**  Functional Description:
+**
+**      This routine parses the command line options.
+**
+**  Usage:
+**
+**      ParseCmdLine argc, argv, OptData
+**
+**  Formal parameters:
+**
+**      argc 		- (IN) argument count
+**      argv         	- (IN) address of an argument array 
+**      OptData		- (OUT) address of command option data structure 
+**			  which will contain the parsed input.
+**
+**  Implicit Parameters:
+**
+**      None
+**
+**  Routine Value:
+**
+**      None
+**
+**  Side Effects:
+**
+**      None
+**
+*/
+static void
+ParseCmdLine (
+    int			argc,
+    char		*argv[],
+    OPT_DATA		*OptData
+    )
+{
+int option,
+    i;
+
+/*
+** Initialize the option data
+*/
+OptData->log_name = NULL;
+OptData->sym_name = NULL;
+OptData->host_name = NULL;
+
+/*
+** Process the command line options
+*/
+while ((option = getopt (argc, argv, "l:s:?")) != EOF) 
+    {
+    switch (option) 
+	{
+	/* 
+	** Output to logical name ?
+	*/
+	case 'l':
+	    OptData->log_name = strdup (optarg);
+	    break;
+
+	/* 
+	** Output to symbol name ?
+	*/
+	case 's':
+	    OptData->sym_name = strdup (optarg);
+	    break;
+
+	/* 
+	** Invalid argument ?
+	*/
+	case '?':
+	default:
+	    Usage ();
+	    exit (1);
+	    break;
+	}
+    }
+
+/*
+** Are the number of parameters correct ?
+*/
+if (argc - optind > 1)
+    {
+    Usage ();
+    exit (1);
+    }
+
+/*
+** Host Name provided ?
+*/
+if (argc - optind == 1)
+    OptData->host_name = strdup (argv[optind]);
+
+}
+
+/*
+**
+**  SetLogName - Set a logical name & value
+**
+**  Functional Description:
+**
+**      This routine sets a logical name & value.
+**
+**  Usage:
+**
+**      SetLogName LogName, LogValue
+**
+**  Formal parameters:
+**
+**      LogName		- (IN) address of the logical name
+**      LogValue       	- (IN) address of the logical value
+**
+**  Implicit Parameters:
+**
+**      None
+**
+**  Routine Value:
+**
+**      None
+**
+**  Side Effects:
+**
+**      None
+**
+*/
+static void
+SetLogName (
+    char 		*LogName,
+    char		*LogValue
+    )
+{
+struct dsc$descriptor_s log_nam_desc = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0};
+struct dsc$descriptor_s log_val_desc = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0};
+int status;
+
+/*
+** Setup the logical name & value descriptors
+*/
+log_nam_desc.dsc$w_length = strlen (LogName);
+log_nam_desc.dsc$a_pointer = LogName;
+log_val_desc.dsc$w_length = strlen (LogValue);
+log_val_desc.dsc$a_pointer = LogValue;
+
+/*
+** Set the logical name & value
+*/
+status = lib$set_logical (&log_nam_desc, &log_val_desc, 0, 0, 0);
+if (! (status & 1))
+    exit (status);
+
+}
+
+/*
+**
+**  SetSymName - Set a symbol name & value
+**
+**  Functional Description:
+**
+**      This routine sets a symbol name & value.
+**
+**  Usage:
+**
+**      SetSymName SymName, SymValue
+**
+**  Formal parameters:
+**
+**      SymName		- (IN) address of the symbol name
+**      SymValue       	- (IN) address of the Symbol value
+**
+**  Implicit Parameters:
+**
+**      None
+**
+**  Routine Value:
+**
+**      None
+**
+**  Side Effects:
+**
+**      None
+**
+*/
+static void
+SetSymName (
+    char 		*SymName,
+    char		*SymValue
+    )
+{
+struct dsc$descriptor_s sym_nam_desc = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0};
+struct dsc$descriptor_s sym_val_desc = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0};
+int status;
+
+/*
+** Setup the symbol name & value descriptors
+*/
+sym_nam_desc.dsc$w_length = strlen (SymName);
+sym_nam_desc.dsc$a_pointer = SymName;
+sym_val_desc.dsc$w_length = strlen (SymValue);
+sym_val_desc.dsc$a_pointer = SymValue;
+
+/*
+** Set the symbol name & value
+*/
+status = lib$set_symbol (&sym_nam_desc, &sym_val_desc, &LIB$K_CLI_LOCAL_SYM);
+if (! (status & 1))
+    exit (status);
+
+}
+
+/*
+**
+**  Usage - Display the acceptable unix style command usage
+**
+**  Functional Description:
+**
+**      This routine displays to standard output the appropriate unix style 
+**	command usage.
+**
+**  Usage:
+**
+**      Usage 
+**
+**  Formal parameters:
+**
+**      None
+**
+**  Implicit Parameters:
+**
+**      None
+**
+**  Routine Value:
+**
+**      None
+**
+**  Side Effects:
+**
+**      None
+**
+*/
+static void
+Usage ()
+{
+
+fprintf (stdout, "Usage: HOSTADDR [-l log-name] [-s sym-name] [host-name]\n");
+
+}
+#endif    /* #ifdef VMS */

VMS/cert_tool/hostname.c

@@ -0,0 +1,513 @@
+
+#ifdef VMS
+#pragma module HOSTNAME "X-1"
+
+/*
+**
+** Copyright (c) 2000 Compaq Computer Corporation
+** COMPAQ Registered in U.S. Patent and Trademark Office.
+**
+** Confidential computer software. Valid license from Compaq or
+** authorized sublicensor required for possession, use or copying.
+** Consistent with FAR 12.211 and 12.212, Commercial Computer Software,
+** Computer Software Documentation, and Technical Data for Commercial
+** Items are licensed to the U.S. Government under vendor's standard
+** commercial license.
+**
+*/
+
+/*
+**++
+**
+**  FACILITY:  Apache Web Server
+**
+**  ABSTRACT:
+**
+**	This program determine the hostname of the default node or of
+**	a given hostaddr.
+**
+**	The command line syntax is:
+**
+**	    HOSTNAME [-l log-name] [-s sym-name] [host-addr]
+**
+**	where:
+**
+**	    -l log-name	    specifies an optional logical name to receive hostname.
+**
+**	    -c sym-name	    specifies an optional symbol name to receive hostname.
+**
+**	    host-addr	    specifies an optional host address to resolve.
+**
+**  AUTHOR:  Matthew Doremus			CREATION DATE:  07-Jul-2000
+**
+**  Modification History:
+**
+**	X-1	Matthew Doremus				07-Jul-2000
+**		Initial development
+**
+**--
+**
+**  Compile/Link instructions:
+**
+**	OpenVMS Alpha/VAX:
+**	    $ CC HOSTNAME+SYS$LIBRARY:SYS$LIB_C/LIBRARY
+**	    $ LINK HOSTNAME
+**
+*/
+
+/*
+** Define __NEW_STARLET if it's not already defined
+*/
+#ifndef __NEW_STARLET
+#define __NEW_STARLET
+#define __NEW_STARLET_SET
+#endif
+
+/*
+** Include the necessary header files
+*/
+#include <lib$routines>
+#include <libclidef>
+#include <descrip>
+#include <stdlib>
+#include <string>
+#include <stdio>
+#include <netdb>
+#include <in>
+#include <socket>
+
+/*
+** Undefine __NEW_STARLET if we had defined it
+*/
+#ifndef __NEW_STARLET_SET
+#undef  __NEW_STARLET_SET
+#undef  __NEW_STARLET
+#endif
+
+/*
+** Option Data Structure
+*/
+typedef struct _opt_data {
+    char		*log_name;
+    char		*sym_name;
+    unsigned char	host_addr[4]; 
+    } OPT_DATA;
+
+/*
+** Local Routine Prototypes
+*/
+static void 
+ParseCmdLine (
+    int,
+    char *[],
+    OPT_DATA *);
+
+static void
+SetLogName (
+    char *,
+    char *);
+
+static void
+SetSymName (
+    char *,
+    char *);
+
+static void 
+Usage ();
+
+/*
+**
+**  main - Main processing routine for the HOSTNAME utility
+**
+**  Functional Description:
+**
+**	This routine controls overall program execution.
+**
+**  Usage:
+**
+**      main argc, argv, envp
+**
+**  Formal parameters:
+**
+**      argc 		- (IN) argument count
+**      argv         	- (IN) address of an argument array 
+**      envp         	- (IN) address of an environment string 
+**
+**  Implicit Parameters:
+**
+**      None
+**
+**  Routine Value:
+**
+**      None
+**
+**  Side Effects:
+**
+**      None
+**
+*/
+int
+main (
+    int		argc,
+    char	*argv[],
+    char	*envp[]
+    )
+{
+struct in_addr host_addr;
+char hostname[512+1];
+struct hostent *hp;
+OPT_DATA OptData;
+int i;
+
+/*
+** Parse the command line
+*/
+ParseCmdLine (argc, argv, &OptData);
+
+/*
+** If no host address was given, then use gethostname otherwise
+** use gethostbyaddr.
+*/
+if (! OptData.host_addr[0] && ! OptData.host_addr[1] && 
+    ! OptData.host_addr[2] && ! OptData.host_addr[3])
+    {
+    if (gethostname (hostname, sizeof (hostname) - 1))
+        {
+        perror ("gethostname");
+        exit (1);
+        }
+
+    if (! (hp = gethostbyname (hostname)))
+	{
+        perror ("gethostbyname");
+	exit (1);
+	}
+    }
+else
+    {
+    host_addr.s_net = OptData.host_addr[0];
+    host_addr.s_host = OptData.host_addr[1];
+    host_addr.s_lh = OptData.host_addr[2];
+    host_addr.s_impno = OptData.host_addr[3];
+    	
+    if (! (hp = gethostbyaddr (&host_addr, sizeof (host_addr), AF_INET)))
+	{
+        perror ("gethostbyaddr");
+	exit (1);
+	}
+    }
+
+/*
+** Let's try to determine the best available fully qualified hostname.
+*/
+if (hp->h_name)
+    {
+    strcpy (hostname, hp->h_name);
+    if (! strchr (hostname, '.'))
+	{
+	for (i = 0; hp->h_aliases[i]; i++)
+	    {
+	    if (strchr (hp->h_aliases[i], '.') && 
+	        ! strncasecmp (hp->h_aliases[i], hostname, strlen (hostname)))
+		{     
+		strcpy (hostname, hp->h_aliases[i]);
+		break;
+		}
+	    }
+	}
+    }
+else
+    strcpy (hostname, "(unavailable)");
+
+/*
+** Define a logical name if one was provided
+*/
+if (OptData.log_name)
+    SetLogName (OptData.log_name, hostname);
+
+/*
+** Define a symbol name if one was provided
+*/
+if (OptData.sym_name)
+    SetSymName (OptData.sym_name, hostname);
+
+/*
+** print the host name if no logical or symbol name was provided
+*/
+if (! OptData.log_name && ! OptData.sym_name)
+    printf ("%s\n", hostname);
+
+}
+
+/*
+**
+**  ParseCmdLine - Parse the command line options
+**
+**  Functional Description:
+**
+**      This routine parses the command line options.
+**
+**  Usage:
+**
+**      ParseCmdLine argc, argv, OptData
+**
+**  Formal parameters:
+**
+**      argc 		- (IN) argument count
+**      argv         	- (IN) address of an argument array 
+**      OptData		- (OUT) address of command option data structure 
+**			  which will contain the parsed input.
+**
+**  Implicit Parameters:
+**
+**      None
+**
+**  Routine Value:
+**
+**      None
+**
+**  Side Effects:
+**
+**      None
+**
+*/
+static void
+ParseCmdLine (
+    int			argc,
+    char		*argv[],
+    OPT_DATA		*OptData
+    )
+{
+int option,
+    i;
+
+/*
+** Initialize the option data
+*/
+OptData->log_name = NULL;
+OptData->sym_name = NULL;
+OptData->host_addr[0] = 0;
+OptData->host_addr[1] = 0;
+OptData->host_addr[2] = 0;
+OptData->host_addr[3] = 0;
+
+/*
+** Process the command line options
+*/
+while ((option = getopt (argc, argv, "l:s:?")) != EOF) 
+    {
+    switch (option) 
+	{
+	/* 
+	** Output to logical name ?
+	*/
+	case 'l':
+	    OptData->log_name = strdup (optarg);
+	    break;
+
+	/* 
+	** Output to symbol name ?
+	*/
+	case 's':
+	    OptData->sym_name = strdup (optarg);
+	    break;
+
+	/* 
+	** Invalid argument ?
+	*/
+	case '?':
+	default:
+	    Usage ();
+	    exit (1);
+	    break;
+	}
+    }
+
+/*
+** Are the number of parameters correct ?
+*/
+if (argc - optind > 1)
+    {
+    Usage ();
+    exit (1);
+    }
+
+/*
+** Host Address provided ?
+*/
+if (argc - optind == 1)
+    {
+    char *addr_ptr = argv[optind],
+         *addr_sep;
+
+    for (i = 0; i < 4; i++)
+	{
+        if ((addr_sep = strchr (addr_ptr, '.')) && (i < 3))
+	    *addr_sep = '\0';
+
+	if (strlen (addr_ptr) == 0 || atoi (addr_ptr) > 255 ||
+	    strspn (addr_ptr, "0123456789") != strlen (addr_ptr))
+	    {
+	    printf ("Invalid TCP/IP address format.\n");
+	    exit (1);
+	    }
+
+	OptData->host_addr[i] = atoi (addr_ptr);
+	if (addr_sep)
+	    addr_ptr = addr_sep + 1;
+	}    
+    }
+}
+
+/*
+**
+**  SetLogName - Set a logical name & value
+**
+**  Functional Description:
+**
+**      This routine sets a logical name & value.
+**
+**  Usage:
+**
+**      SetLogName LogName, LogValue
+**
+**  Formal parameters:
+**
+**      LogName		- (IN) address of the logical name
+**      LogValue       	- (IN) address of the logical value
+**
+**  Implicit Parameters:
+**
+**      None
+**
+**  Routine Value:
+**
+**      None
+**
+**  Side Effects:
+**
+**      None
+**
+*/
+static void
+SetLogName (
+    char 		*LogName,
+    char		*LogValue
+    )
+{
+struct dsc$descriptor_s log_nam_desc = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0};
+struct dsc$descriptor_s log_val_desc = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0};
+int status;
+
+/*
+** Setup the logical name & value descriptors
+*/
+log_nam_desc.dsc$w_length = strlen (LogName);
+log_nam_desc.dsc$a_pointer = LogName;
+log_val_desc.dsc$w_length = strlen (LogValue);
+log_val_desc.dsc$a_pointer = LogValue;
+
+/*
+** Set the logical name & value
+*/
+status = lib$set_logical (&log_nam_desc, &log_val_desc, 0, 0, 0);
+if (! (status & 1))
+    exit (status);
+
+}
+
+/*
+**
+**  SetSymName - Set a symbol name & value
+**
+**  Functional Description:
+**
+**      This routine sets a symbol name & value.
+**
+**  Usage:
+**
+**      SetSymName SymName, SymValue
+**
+**  Formal parameters:
+**
+**      SymName		- (IN) address of the symbol name
+**      SymValue       	- (IN) address of the Symbol value
+**
+**  Implicit Parameters:
+**
+**      None
+**
+**  Routine Value:
+**
+**      None
+**
+**  Side Effects:
+**
+**      None
+**
+*/
+static void
+SetSymName (
+    char 		*SymName,
+    char		*SymValue
+    )
+{
+struct dsc$descriptor_s sym_nam_desc = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0};
+struct dsc$descriptor_s sym_val_desc = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0};
+int status;
+
+/*
+** Setup the symbol name & value descriptors
+*/
+sym_nam_desc.dsc$w_length = strlen (SymName);
+sym_nam_desc.dsc$a_pointer = SymName;
+sym_val_desc.dsc$w_length = strlen (SymValue);
+sym_val_desc.dsc$a_pointer = SymValue;
+
+/*
+** Set the symbol name & value
+*/
+status = lib$set_symbol (&sym_nam_desc, &sym_val_desc, &LIB$K_CLI_LOCAL_SYM);
+if (! (status & 1))
+    exit (status);
+
+}
+
+/*
+**
+**  Usage - Display the acceptable unix style command usage
+**
+**  Functional Description:
+**
+**      This routine displays to standard output the appropriate unix style 
+**	command usage.
+**
+**  Usage:
+**
+**      Usage 
+**
+**  Formal parameters:
+**
+**      None
+**
+**  Implicit Parameters:
+**
+**      None
+**
+**  Routine Value:
+**
+**      None
+**
+**  Side Effects:
+**
+**      None
+**
+*/
+static void
+Usage ()
+{
+
+fprintf (stdout, "Usage: HOSTNAME [-l log-name] [-s sym-name] [host-addr]\n");
+
+}
+#endif      /* #ifdef VMS */

VMS/cert_tool/ssl$auth_cert.com

@@ -0,0 +1,639 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$AUTH_CERT.COM - SSL Certificate Authority procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure prompts the user through creating a Server Certificate.
+$!
+$! There are no parameters used.
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ DELETE := DELETE
+$ SAY := WRITE SYS$OUTPUT
+$ ASK := READ SYS$COMMAND /END_OF_FILE=EXIT /PROMPT=
+$ PID = F$GETJPI ("","PID")
+$ TT_NOECHO = F$GETDVI ("TT:","TT_NOECHO")
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ TT_ROWS = F$GETDVI ("TT:","TT_PAGE")
+$ TT_COLS = F$GETDVI ("TT:","DEVBUFSIZ")
+$!
+$ GET_USER_DATA := CALL GET_USER_DATA
+$ SET_USER_DATA := CALL SET_USER_DATA
+$ DEL_USER_DATA := CALL DEL_USER_DATA
+$ INIT_TERM := @SSL$COM:SSL$INIT_TERM
+$ SHOW_FILE := @SSL$COM:SSL$SHOW_FILE 
+$ SSL_CONF_FILE = F$TRNLMN ("SSL$CA_CONF")
+$ GET_CONF_DATA := @SSL$COM:SSL$CONF_UTIL 'SSL_CONF_FILE' GET
+$ SET_CONF_DATA := @SSL$COM:SSL$CONF_UTIL 'SSL_CONF_FILE' SET
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$ BELL[0,8] = 7 	! Ring the terminal Bell
+$ RED = 1		! Color - Red
+$ FGD = 30		! Foreground
+$ BGD = 0		! Background
+$ CSCR = ESC + "[2J"	! Clear the Screen 
+$ CEOS = ESC + "[0J"	! Clear to the End of the Screen 
+$ CEOL = ESC + "[0K"	! Clear to the End of the Line
+$ NORM = ESC + "[0m"	! Turn Attributes off
+$ BLNK = ESC + "[5m"    ! Turn on BLINK Attribute
+$ WIDE = ESC + "#6"     ! Turn on WIDE Attribute
+$!
+$!------------------------------------------------------------------------------
+$! Run the SSL setup if it hasn't been run yet
+$!------------------------------------------------------------------------------
+$!
+$ IF F$TRNLNM ("SSL$CA_CONF") .EQS. ""
+$ THEN
+$     IF F$SEARCH ("SSL$COM:SSL$INIT_ENV.COM") .NES. ""
+$     THEN 
+$         @SSL$COM:SSL$INIT_ENV.COM
+$     ELSE
+$         SAY BELL, "Unable to locate SSL$COM:SSL$INIT_ENV.COM ..."
+$	  GOTO EXIT
+$     ENDIF
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Display the Page Header
+$!------------------------------------------------------------------------------
+$!
+$ INIT_TERM
+$ BCOLOR = BGD
+$ FCOLOR = FGD + RED
+$ COLOR = ESC + "[''BCOLOR';''FCOLOR'm"
+$!
+$ TEXT = "SSL Certificate Tool"
+$ COL = (TT_COLS - (F$LENGTH (TEXT) * 2)) / 4
+$!
+$ SAY ESC + "[01;01H", CSCR
+$ SAY ESC + "[02;''COL'H", COLOR, WIDE, TEXT, NORM
+$!
+$ TEXT = "Create Certification Authority"
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[04;01H"
+$ SAY ESC + "[04;''COL'H", COLOR, TEXT, NORM
+$!
+$ ROW = 6
+$ COL = 2
+$ TOP_ROW = ROW
+$ MSG_ROW = TT_ROWS - 1
+$!
+$!------------------------------------------------------------------------------
+$! Initialize the Request Data
+$!------------------------------------------------------------------------------
+$!
+$ IF F$SEARCH ("''SSL_CONF_FILE'") .NES. ""
+$ THEN 
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Reading Configuration ...", NORM
+$ ELSE
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Initializing Configuration ...", NORM
+$ ENDIF
+$!
+$ _request_name = "req"
+$!
+$ _distinguished_name = "CA_distinguished_name"
+$ _distinguished_name_upd = "Y"
+$!
+$ _default_bits = "1024"
+$ _default_bits_upd = "Y"
+$!
+$ _default_days = "1825"
+$ _default_days_upd = "Y"
+$!
+$ _default_keyfile = "SSL$KEY:SERVER_CA.KEY"
+$ _default_keyfile_upd = "Y"
+$!
+$ _default_crtfile = "SSL$CRT:SERVER_CA.CRT"
+$ _default_crtfile_upd = "Y"
+$!
+$ _countryName_prompt = "Country Name ?"
+$ _countryName_min = "2"
+$ _countryName_max = "2"
+$ _countryName_default = "US"
+$ _countryName_upd = "Y"
+$ _countryName_cnt = 4
+$!
+$ _0organizationName_prompt = "Organization Name ?"
+$ _0organizationName_default = ""
+$ _0organizationName_upd = "Y"
+$ _0organizationName_cnt = 2
+$!
+$ _organizationalUnitName_prompt = "Organization Unit Name ?"
+$ _organizationalUnitName_default = ""
+$ _organizationalUnitName_upd = "Y"
+$ _organizationalUnitName_cnt = 2
+$!
+$ _commonName_prompt = "Common Name ?"
+$ _commonName_max = "64"
+$ _commonName_default = "CA Authority"
+$ _commonName_upd = "Y"
+$ _commonName_cnt = 3
+$!
+$ IF F$SEARCH ("''SSL_CONF_FILE'") .NES. ""
+$ THEN 
+$     GET_CONF_DATA "[''_request_name']#distinguished_name"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _distinguished_name = SSL_CONF_DATA
+$         _distinguished_name_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_request_name']#default_bits"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_bits = SSL_CONF_DATA
+$         _default_bits_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_request_name']#default_days"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_days = SSL_CONF_DATA
+$         _default_days_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_request_name']#default_keyfile"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_keyfile = F$PARSE (SSL_CONF_DATA,"SSL$ROOT:",,"DEVICE") + -
+ 		             F$PARSE (SSL_CONF_DATA,"[KEY]",,"DIRECTORY") + -
+ 		             F$PARSE (SSL_CONF_DATA,"SERVER",,"NAME") + -
+ 		             F$PARSE (SSL_CONF_DATA,".KEY",,"TYPE") 
+$         _default_keyfile_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_request_name']#default_crtfile"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_crtfile = F$PARSE (SSL_CONF_DATA,"SSL$ROOT:",,"DEVICE") + -
+ 		             F$PARSE (SSL_CONF_DATA,"[CRT]",,"DIRECTORY") + -
+ 		             F$PARSE (SSL_CONF_DATA,"SERVER",,"NAME") + -
+ 		             F$PARSE (SSL_CONF_DATA,".CRT",,"TYPE") 
+$         _default_crtfile_upd = "N"
+$     ENDIF
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#countryName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _countryName_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#countryName_min"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _countryName_min = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#countryName_max"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _countryName_max = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#countryName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _countryName_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _countryName_cnt .EQ. CTR THEN _countryName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#0.organizationName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _0organizationName_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#0.organizationName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _0organizationName_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _0organizationName_cnt .EQ. CTR THEN _0organizationName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#organizationalUnitName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _organizationalUnitName_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#organizationalUnitName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _organizationalUnitName_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _organizationalUnitName_cnt .EQ. CTR THEN _organizationalUnitName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#commonName"
+$     IF SSL_CONF_DATA .NES. "" 
+$     THEN
+$         _commonName_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#commonName_max"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _commonName_max = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#commonName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _commonName_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _commonName_cnt .EQ. CTR THEN _commonName_upd = "N"
+$ ENDIF
+$!
+$ SET_USER_DATA "[]#pem_pass_phrase#-##PEM Pass Phrase ?#P#1###Y#Y"
+$ SET_USER_DATA "[''_request_name']#default_bits#D#''_default_bits'#Encryption Bits ?#I###''_default_bits_upd'#Y#N"
+$ SET_USER_DATA "[''_request_name']#default_days#D#''_default_days'#Default Days ?#I###''_default_days_upd'#Y#N"
+$ SET_USER_DATA "[''_request_name']#default_keyfile#D#''_default_keyfile'#CA certificate Key File ?#F###''_default_keyfile_upd'#Y#N"
+$ SET_USER_DATA "[''_request_name']#default_crtfile#D#''_default_crtfile'#CA certificate File ?#F###''_default_crtfile_upd'#Y#N"
+$ SET_USER_DATA "[''_request_name']#distinguished_name#D#''_distinguished_name'##S###''_distinguished_name_upd'#N#N"
+$ SET_USER_DATA "[''_distinguished_name']#countryName#P#''_countryName_default'#''_countryName_prompt'#S#''_countryName_min'#''_countryName_max'#''_countryName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#0.organizationName#P#''_0organizationName_default'#''_0organizationName_prompt'#S###''_0organizationName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#organizationalUnitName#P#''_organizationalUnitName_default'#''_organizationalUnitName_prompt'#S###''_organizationUnitName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#commonName#P#''_commonName_default'#''_commonName_prompt'#S##''_commonName_max'#''_commonName_upd'#Y#N"
+$ SET_USER_DATA "[]#display_certificate#-#N#Display the CA certificate ?#S##1##Y#N"
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$!
+$!------------------------------------------------------------------------------
+$! Confirm/Update the SSL Configuration Data
+$!------------------------------------------------------------------------------
+$!
+$ CTR = 1
+$!
+$PROMPT_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN 
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     TYP = F$ELEMENT (5,"#",SSL_USER_DATA_'CTR') ! Value Type
+$     MIN = F$ELEMENT (6,"#",SSL_USER_DATA_'CTR') ! Value Minimum Length
+$     MAX = F$ELEMENT (7,"#",SSL_USER_DATA_'CTR') ! Value Maximum Length
+$     UPD = F$ELEMENT (8,"#",SSL_USER_DATA_'CTR') ! Entry Updated ?
+$     REQ = F$ELEMENT (9,"#",SSL_USER_DATA_'CTR') ! Entry Required for Input ?
+$     CFM = F$ELEMENT (10,"#",SSL_USER_DATA_'CTR')! Confirm Input  ?
+$     CONFIRMED = 0
+$     IF REQ .EQS. "N"
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO PROMPT_LOOP
+$     ENDIF
+$     IF ROW .GT. MSG_ROW - 2
+$     THEN 
+$         SAY ESC + "[''TOP_ROW';01H", CEOS
+$	  ROW = TOP_ROW
+$     ENDIF
+$!
+$CONFIRM_LOOP:
+$!
+$     IF PRM .EQS. "" 
+$     THEN 
+$         PROMPT = ESC + "[''ROW';''COL'H''ITM' ? [''DEF'] ''CEOL'"
+$     ELSE
+$         PROMPT = ESC + "[''ROW';''COL'H''PRM' [''DEF'] ''CEOL'"
+$     ENDIF
+$     IF TYP .EQS. "P" THEN SET TERMINAL /NOECHO
+$     ASK "''PROMPT'" ANS /END_OF_FILE=EXIT
+$     IF TYP .EQS. "P" THEN SET TERMINAL /ECHO
+$     ANS = F$EDIT (ANS,"TRIM")
+$     IF ANS .EQS. "" THEN ANS = DEF
+$     IF TYP .EQS. "F"
+$     THEN 
+$         ANS = F$PARSE ("''ANS'","''DEF'",,,"SYNTAX_ONLY")	  
+$     ENDIF
+$     IF TYP .EQS. "I" .AND. F$TYPE (ANS) .NES. "INTEGER"
+$     THEN 
+$         CALL INVALID_ENTRY
+$         SAY ESC + "[''ROW';01H", CEOS
+$         GOTO PROMPT_LOOP
+$     ENDIF
+$     IF (TYP .EQS. "S" .OR. TYP .EQS. "P") .AND. -
+         ((MIN .NES. "" .AND. F$LENGTH (ANS) .LT. F$INTEGER(MIN)) .OR. -
+          (MAX .NES. "" .AND. F$LENGTH (ANS) .GT. F$INTEGER(MAX)))
+$     THEN 
+$         CALL INVALID_ENTRY
+$         SAY ESC + "[''ROW';01H", CEOS
+$	  IF TYP .EQS. "S" THEN GOTO PROMPT_LOOP
+$         IF TYP .EQS. "P" THEN GOTO CONFIRM_LOOP
+$     ENDIF
+$     ROW = ROW + 1
+$     IF CFM .EQS. "Y"
+$     THEN
+$         IF CONFIRMED .EQ. 0
+$	  THEN
+$	      CONFIRMED = 1
+$	      CONFIRMED_ANS = ANS
+$	      PRM = "Confirm ''PRM'"
+$	      GOTO CONFIRM_LOOP
+$         ELSE
+$	      IF ANS .NES. CONFIRMED_ANS
+$	      THEN 
+$                 CALL INVALID_ENTRY
+$		  ROW = ROW - 2
+$                 SAY ESC + "[''ROW';01H", CEOS
+$                 GOTO PROMPT_LOOP
+$	      ENDIF
+$         ENDIF
+$     ENDIF
+$     IF ANS .NES. DEF THEN SSL_USER_DATA_'CTR' = "''KEY'#''ITM'#''VAL'#''ANS'#''PRM'#''TYP'#''MIN'#''MAX'#Y#''REQ'#''CFM'"
+$     CTR = CTR + 1
+$     GOTO PROMPT_LOOP
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Save the SSL Configuration Data
+$!------------------------------------------------------------------------------
+$!
+$ CTR = 1
+$ SAY ESC + "[''MSG_ROW';01H", BLNK, " Saving Configuration ...", NORM
+$!
+$SAVE_CONF_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN 
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     TYP = F$ELEMENT (5,"#",SSL_USER_DATA_'CTR') ! Value Type
+$     MIN = F$ELEMENT (6,"#",SSL_USER_DATA_'CTR') ! Value Minimum Length
+$     MAX = F$ELEMENT (7,"#",SSL_USER_DATA_'CTR') ! Value Maximum Length
+$     UPD = F$ELEMENT (8,"#",SSL_USER_DATA_'CTR') ! Entry Updated ?
+$     REQ = F$ELEMENT (9,"#",SSL_USER_DATA_'CTR') ! Entry Required for Input ?
+$     CFM = F$ELEMENT (10,"#",SSL_USER_DATA_'CTR')! Confirm Input ?
+$     IF UPD .NES. "Y" .OR. VAL .EQS. "-"
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO SAVE_CONF_LOOP
+$     ENDIF
+$     IF VAL .EQS. "D"
+$     THEN 
+$         SET_CONF_DATA "''KEY'#''ITM'" "''DEF'"
+$     ELSE
+$         SET_CONF_DATA "''KEY'#''ITM'" "''PRM'"
+$         SET_CONF_DATA "''KEY'#''ITM'_default" "''DEF'"
+$     ENDIF
+$     IF MIN .NES. "" THEN SET_CONF_DATA "''KEY'#''ITM'_min" "''MIN'"
+$     IF MAX .NES. "" THEN SET_CONF_DATA "''KEY'#''ITM'_max" "''MAX'"
+$     CTR = CTR + 1
+$     GOTO SAVE_CONF_LOOP
+$ ENDIF
+$!
+$ PURGE /NOLOG /NOCONFIRM 'SSL_CONF_FILE'
+$ RENAME 'SSL_CONF_FILE'; ;1
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$!
+$!------------------------------------------------------------------------------
+$! Create the Certificiate Authority
+$!------------------------------------------------------------------------------
+$!
+$ SAY ESC + "[''MSG_ROW';01H", BLNK, " Creating Certificate Authority ...", NORM
+$!
+$ X1 = 2
+$ Y1 = TOP_ROW
+$ X2 = TT_COLS - 2
+$ Y2 = MSG_ROW - 1
+$!
+$ GET_USER_DATA "[''_request_name']#default_days"
+$ _default_days = SSL_USER_DATA
+$ GET_USER_DATA "[''_request_name']#default_keyfile"
+$ _default_keyfile = SSL_USER_DATA
+$ GET_USER_DATA "[''_request_name']#default_crtfile"
+$ _default_crtfile = SSL_USER_DATA
+$ GET_USER_DATA "[]#pem_pass_phrase"
+$ _pem_pass_phrase = SSL_USER_DATA
+$ GET_USER_DATA "[]#display_certificate"
+$ _display_certificate = SSL_USER_DATA
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SHOW SYSTEM /FULL /OUT=SYS$LOGIN:SSL_REQ_'PID'.RND
+$!
+$ OPEN /WRITE OFILE SYS$LOGIN:SSL_REQ_'PID'.COM
+$ WRITE OFILE "$ DEFINE /USER /NOLOG RANDFILE    SYS$LOGIN:SSL_REQ_''PID'.RND"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_REQ_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_REQ_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$ WRITE OFILE "$ OPENSSL req -config ''SSL_CONF_FILE' -new -x509 -days ''_default_days' -keyout ''_default_keyfile' -out ''_default_crtfile'"
+$ WRITE OFILE "''_pem_pass_phrase'"
+$ WRITE OFILE "''_pem_pass_phrase'"
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ CLOSE OFILE
+$!
+$ @SYS$LOGIN:SSL_REQ_'PID'.COM
+$!
+$ DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.RND;*
+$ DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.COM;*
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SEARCH SYS$LOGIN:SSL_REQ_'PID'.LOG /OUT=SYS$LOGIN:SSL_REQ_'PID'.ERR ":error:"
+$ IF F$SEARCH ("SYS$LOGIN:SSL_REQ_''PID'.ERR") .NES. "" 
+$ THEN 
+$     IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_REQ_''PID'.ERR","ALQ") .NE. 0
+$     THEN 
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.ERR;*
+$         SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$         SHOW_FILE "SYS$LOGIN:SSL_REQ_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >" 
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.LOG;*
+$         GOTO EXIT
+$     ENDIF
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.ERR;*
+$ ENDIF
+$!
+$ DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.LOG;*
+$! 
+$ IF F$EDIT (_display_certificate,"TRIM,UPCASE") .EQS. "Y"
+$ THEN 
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Generating Output ...", NORM, CEOL
+$!
+$     OPEN /WRITE OFILE SYS$LOGIN:SSL_X509_'PID'.COM
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_X509_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_X509_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$     WRITE OFILE "$ OPENSSL x509 -noout -text -in ''_default_crtfile'"
+$     CLOSE OFILE
+$!
+$     @SYS$LOGIN:SSL_X509_'PID'.COM
+$!
+$     DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.COM;*
+$!
+$     DEFINE /USER /NOLOG SYS$ERROR  NL:
+$     DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$     SEARCH SYS$LOGIN:SSL_X509_'PID'.LOG /OUT=SYS$LOGIN:SSL_X509_'PID'.ERR ":error:"
+$     IF F$SEARCH ("SYS$LOGIN:SSL_X509_''PID'.ERR") .NES. "" 
+$     THEN 
+$         IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_X509_''PID'.ERR","ALQ") .NE. 0
+$         THEN 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.ERR;*
+$             SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$             SHOW_FILE "SYS$LOGIN:SSL_X509_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >" 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.LOG;*
+$             GOTO EXIT
+$         ENDIF
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.ERR;*
+$     ENDIF
+$!
+$     SAY ESC + "[''MSG_ROW';01H''CEOS'"
+$     SHOW_FILE "SYS$LOGIN:SSL_X509_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ''_default_crtfile' >" 
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.LOG;*
+$     GOTO EXIT
+$ ENDIF
+$!
+$ TEXT = "Press return to continue"
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$ PROMPT = ESC + "[''MSG_ROW';''COL'H''TEXT'"
+$ ASK "''PROMPT'" OPT
+$!
+$GOTO EXIT
+$!
+$!------------------------------------------------------------------------------
+$! Set the User Data
+$!------------------------------------------------------------------------------
+$!
+$SET_USER_DATA: SUBROUTINE
+$!
+$ IF F$TYPE (SSL_USER_DATA_MAX) .EQS. ""
+$ THEN
+$     SSL_USER_DATA_MAX == 1
+$ ELSE
+$     SSL_USER_DATA_MAX == SSL_USER_DATA_MAX + 1
+$ ENDIF
+$!
+$ SSL_USER_DATA_'SSL_USER_DATA_MAX' == "''P1'"
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Get the User Data
+$!------------------------------------------------------------------------------
+$!
+$GET_USER_DATA: SUBROUTINE
+$!
+$ CTR = 1
+$ USER_KEY = F$ELEMENT (0,"#",P1)
+$ USER_ITM = F$ELEMENT (1,"#",P1)
+$!
+$GET_USER_DATA_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     IF USER_KEY .NES. KEY .OR. USER_ITM .NES. ITM
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO GET_USER_DATA_LOOP
+$     ENDIF
+$     IF VAL .EQS. "-" THEN SSL_USER_DATA == "''DEF'"
+$     IF VAL .EQS. "D" THEN SSL_USER_DATA == "''DEF'"
+$     IF VAL .EQS. "P" THEN SSL_USER_DATA == "''PRM'"
+$ ENDIF
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Delete the User Data
+$!------------------------------------------------------------------------------
+$!
+$DEL_USER_DATA: SUBROUTINE
+$!
+$ IF F$TYPE (SSL_USER_DATA_MAX) .EQS. "" THEN GOTO DEL_USER_DATA_END
+$!
+$DEL_USER_DATA_LOOP:
+$!
+$ IF F$TYPE (SSL_USER_DATA_'SSL_USER_DATA_MAX') .NES. "" 
+$ THEN
+$     DELETE /SYMBOL /GLOBAL SSL_USER_DATA_'SSL_USER_DATA_MAX'
+$     SSL_USER_DATA_MAX == SSL_USER_DATA_MAX - 1
+$     GOTO DEL_USER_DATA_LOOP
+$ ENDIF
+$!
+$ DELETE /SYMBOL /GLOBAL SSL_USER_DATA_MAX
+$!
+$DEL_USER_DATA_END:
+$!
+$ IF F$TYPE (SSL_USER_DATA) .NES. "" THEN DELETE /SYMBOL /GLOBAL SSL_USER_DATA
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Display the invalid entry 
+$!------------------------------------------------------------------------------
+$!
+$INVALID_ENTRY: SUBROUTINE
+$!
+$ SAY ESC + "[''MSG_ROW';01H", BELL, " Invalid Entry, Try again ...''CEOL'"
+$ Wait 00:00:01.5
+$ SAY ESC + "[''MSG_ROW';01H", CEOL
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Exit the procedure
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ CLOSE OFILE
+$!
+$ DEL_USER_DATA
+$!
+$ IF F$TYPE (SSL_CONF_DATA) .NES. "" THEN DELETE /SYMBOL /GLOBAL SSL_CONF_DATA
+$!
+$ IF F$GETDVI ("TT:","TT_NOECHO") .AND. .NOT. TT_NOECHO THEN SET TERMINAL /ECHO
+$!
+$ IF F$SEARCH ("SYS$LOGIN:SSL_REQ_''PID'.%%%;*") .NES. "" THEN DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.%%%;*
+$ IF F$SEARCH ("SYS$LOGIN:SSL_X509_''PID'.%%%;*") .NES. "" THEN DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.%%%;*
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$auto_cert.com

@@ -0,0 +1,101 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$AUTO_CERT.COM - SSL Automatic Self-Signed Certificate procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$!
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Define Symbols
+$!------------------------------------------------------------------------------
+$! 
+$ OPENSSL       :== $ SSL$EXE:OPENSSL
+$ HOSTNAME      :== $ SSL$EXE:SSL$HOSTNAME
+$!
+$ HOSTNAME -s HOST_NAME
+$ PID = F$GETJPI ("","PID")
+$ USER = F$EDIT (F$GETJPI ("","USERNAME"),"TRIM")
+$ KEY_FILE = "SSL$KEY:SERVER.KEY"
+$ CRT_FILE = "SSL$CRT:SERVER.CRT"
+$!
+$!------------------------------------------------------------------------------
+$! Create a Temporary SSL Configuration
+$!------------------------------------------------------------------------------
+$!
+$ OPEN /WRITE CFILE SYS$LOGIN:SSL_'PID'.CNF
+$ WRITE CFILE "[req]"
+$ WRITE CFILE "default_bits = 1024"
+$ WRITE CFILE "distinguished_name = REQ_distinguished_name"
+$ WRITE CFILE "[REQ_distinguished_name]"
+$ WRITE CFILE "countryName = Country Name ?"
+$ WRITE CFILE "countryName_default = "
+$ WRITE CFILE "stateOrProvinceName = State or Province Name ?"
+$ WRITE CFILE "stateOrProvinceName_default = "
+$ WRITE CFILE "localityName = City Name ?"
+$ WRITE CFILE "localityName_default = "
+$ WRITE CFILE "0.organizationName = Organization Name ?"
+$ WRITE CFILE "0.organizationName_default = "
+$ WRITE CFILE "organizationalUnitName = Organization Unit Name ?
+$ WRITE CFILE "organizationalUnitName_default = "
+$ WRITE CFILE "commonName = Common Name ?"
+$ WRITE CFILE "commonName_default = ''HOST_NAME'"
+$ WRITE CFILE "emailAddress = Email Address ?"
+$ WRITE CFILE "emailAddress_default = ''USER'@''HOST_NAME'"
+$ CLOSE CFILE
+$!
+$!------------------------------------------------------------------------------
+$! Create the Self-Signed Server Certificiate
+$!------------------------------------------------------------------------------
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SHOW SYSTEM /FULL /OUT=SYS$LOGIN:SSL_'PID'.RND
+$!
+$ OPEN /WRITE OFILE SYS$LOGIN:SSL_'PID'.COM
+$ WRITE OFILE "$ DEFINE /USER /NOLOG RANDFILE    SYS$LOGIN:SSL_''PID'.RND"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$ WRITE OFILE "$ OPENSSL req -nodes -new -days 30 -x509 -config SYS$LOGIN:SSL_''PID'.CNF -keyout ''KEY_FILE' -out ''CRT_FILE'"
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ CLOSE OFILE
+$!
+$ @SYS$LOGIN:SSL_'PID'.COM
+$!
+$ DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_'PID'.CNF;*
+$ DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_'PID'.RND;*
+$ DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_'PID'.COM;*
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SEARCH SYS$LOGIN:SSL_'PID'.LOG /OUT=SYS$LOGIN:SSL_'PID'.ERR ":error:"
+$!
+$ IF F$SEARCH ("SYS$LOGIN:SSL_''PID'.ERR") .NES. "" 
+$ THEN 
+$     IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_''PID'.ERR","ALQ") .NE. 0
+$     THEN 
+$         TYPE SYS$LOGIN:SSL_'PID'.LOG
+$     ENDIF
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_'PID'.ERR;*
+$ ENDIF
+$!
+$ DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_'PID'.LOG;*
+$!
+$!------------------------------------------------------------------------------
+$! Exit
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$cert_tool.com

@@ -0,0 +1,231 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$CERT_TOOL.COM - SSL Certificate Tool procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure provides the user a menu from which they can choose desired 
+$! SSL Certificate processing.
+$!
+$! There are no parameters used.
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ DELETE := DELETE
+$ SAY := WRITE SYS$OUTPUT
+$ ASK := READ SYS$COMMAND /END_OF_FILE=EXIT /PROMPT=
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ TT_ROWS = f$getdvi ("TT:","TT_PAGE")
+$ TT_COLS = f$getdvi ("TT:","DEVBUFSIZ")
+$!
+$ SET_MENU_DATA := CALL SET_MENU_DATA
+$ DEL_MENU_DATA := CALL DEL_MENU_DATA
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$ BELL[0,8] = 7 	! Ring the terminal Bell
+$ RED = 1		! Color - Red
+$ FGD = 30		! Foreground
+$ BGD = 0		! Background
+$ CSCR = ESC + "[2J"	! Clear the Screen 
+$ CEOS = ESC + "[0J"	! Clear to the End of the Screen 
+$ CEOL = ESC + "[0K"	! Clear to the End of the Line
+$ NORM = ESC + "[0m"	! Turn Attributes off
+$ BOLD = ESC + "[1m"    ! Turn on BOLD Attribute
+$ WIDE = ESC + "#6"     ! Turn on WIDE Attribute
+$!
+$!------------------------------------------------------------------------------
+$! Run the SSL setup if it hasn't been run yet
+$!------------------------------------------------------------------------------
+$!
+$ IF F$TRNLNM ("SSL$CA_CONF") .EQS. ""
+$ THEN
+$     IF F$SEARCH ("SSL$COM:SSL$INIT_ENV.COM") .NES. ""
+$     THEN 
+$         @SSL$COM:SSL$INIT_ENV.COM
+$     ELSE
+$         SAY BELL, "Unable to locate SSL$COM:SSL$INIT_ENV.COM ..."
+$	  GOTO EXIT
+$     ENDIF
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Initialize the Menu Items
+$!------------------------------------------------------------------------------
+$!
+$ SET_MENU_DATA "View a Certificate#@SSL$COM:SSL$VIEW_CERT.COM CRT"
+$ SET_MENU_DATA "View a Certificate Signing Request#@SSL$COM:SSL$VIEW_CERT.COM CSR"
+$ SET_MENU_DATA "Create a Certificate Signing Request#@SSL$COM:SSL$RQST_CERT.COM"
+$ SET_MENU_DATA "Create a Self-Signed Certificate#@SSL$COM:SSL$SELF_CERT.COM"
+$ SET_MENU_DATA "Create a CA (Certification Authority) Certificate#@SSL$COM:SSL$AUTH_CERT.COM"
+$ SET_MENU_DATA "Sign a Certificate Signing Request#@SSL$COM:SSL$SIGN_CERT.COM"
+$ SET_MENU_DATA "Hash Certificates#@SSL$COM:SSL$HASH_CERT.COM CRT"
+$ SET_MENU_DATA "Hash Certificate Revocations#@SSL$COM:SSL$HASH_CERT.COM CRL"
+$ SET_MENU_DATA "Exit#GOTO EXIT"
+$!
+$!------------------------------------------------------------------------------
+$! Display the Page Header
+$!------------------------------------------------------------------------------
+$!
+$PAGE_LOOP:
+$!
+$ BCOLOR = BGD 
+$ FCOLOR = FGD + RED
+$ COLOR = ESC + "[''BCOLOR';''FCOLOR'm"
+$!
+$ TEXT = "SSL Certificate Tool"
+$ COL = (TT_COLS - (F$LENGTH (TEXT) * 2)) / 4
+$!
+$ SAY ESC + "[01;01H", CSCR
+$ SAY ESC + "[02;''COL'H", COLOR, WIDE, TEXT, NORM
+$!
+$ TEXT = "Main Menu"
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[04;01H"
+$ SAY ESC + "[04;''COL'H", COLOR, TEXT, NORM
+$!
+$ CTR = 1
+$ ROW = 6
+$ COL = (TT_COLS - (SSL_MENU_ITEM_MAX + 4)) / 2
+$ TOP_ROW = ROW
+$ SEP_ROWS = 2
+$ MSG_ROW = TT_ROWS - 1
+$!
+$!------------------------------------------------------------------------------
+$! Process the menu options
+$!------------------------------------------------------------------------------
+$!
+$MENU_LOOP: 
+$!
+$ IF CTR .LE. SSL_MENU_DATA_MAX
+$ THEN
+$     OPT = F$ELEMENT (0,"#",SSL_MENU_DATA_'CTR') ! Option String
+$     CMD = F$ELEMENT (1,"#",SSL_MENU_DATA_'CTR') ! Command String
+$     IF ROW .GE. (MSG_ROW - (SEP_ROWS + 2)) .AND. SEP_ROWS .GT. 1
+$     THEN
+$         SAY ESC + "[''TOP_ROW';01H", CEOS
+$	  ROW = TOP_ROW
+$         SEP_ROWS = 1
+$         CTR = 1
+$     ELSE
+$	  NUM = F$FAO ("!2SL", CTR)
+$         SAY ESC + "[''ROW';''COL'H", BOLD, "''NUM'. ", NORM, "''OPT'"
+$         ROW = ROW + SEP_ROWS
+$         CTR = CTR + 1
+$     ENDIF	   
+$     GOTO MENU_LOOP
+$ ENDIF    
+$!
+$ ROW = ROW + 1
+$!
+$!------------------------------------------------------------------------------
+$! Prompt the user for input
+$!------------------------------------------------------------------------------
+$!
+$PROMPT_LOOP:
+$!
+$ PROMPT = ESC + "[''ROW';''COL'HEnter Option: ''CEOL'"
+$ ASK "''PROMPT'" OPT /END_OF_FILE=EXIT
+$ OPT = F$EDIT (OPT, "TRIM")
+$ IF OPT .EQS. ""  THEN GOTO PROMPT_LOOP
+$!
+$ IF F$TYPE (OPT) .NES. "INTEGER" .OR. -
+     F$INTEGER (OPT) .LE. 0 .OR. -
+     F$INTEGER (OPT) .GT. SSL_MENU_DATA_MAX
+$ THEN 
+$     CALL INVALID_OPTION
+$     GOTO PROMPT_LOOP
+$ ENDIF
+$!
+$ CMD = F$ELEMENT (1,"#",SSL_MENU_DATA_'OPT')
+$!
+$ 'CMD'
+$!
+$ GOTO PAGE_LOOP
+$!
+$!------------------------------------------------------------------------------
+$! Set the Menu Data
+$!------------------------------------------------------------------------------
+$!
+$SET_MENU_DATA: SUBROUTINE
+$!
+$ IF F$TYPE (SSL_MENU_DATA_MAX) .EQS. ""
+$ THEN
+$     SSL_MENU_DATA_MAX == 1
+$     SSL_MENU_ITEM_MAX == 0
+$ ELSE
+$     SSL_MENU_DATA_MAX == SSL_MENU_DATA_MAX + 1
+$ ENDIF
+$!
+$ SSL_MENU_DATA_'SSL_MENU_DATA_MAX' == "''P1'"
+$!
+$ MENU_ITEM = F$ELEMENT (0,"#",SSL_MENU_DATA_'SSL_MENU_DATA_MAX')
+$ IF F$LENGTH (MENU_ITEM) .GT. SSL_MENU_ITEM_MAX THEN SSL_MENU_ITEM_MAX == F$LENGTH (MENU_ITEM)
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Delete the Menu Data
+$!------------------------------------------------------------------------------
+$!
+$DEL_MENU_DATA: SUBROUTINE
+$!
+$ IF F$TYPE (SSL_MENU_DATA_MAX) .EQS. "" THEN GOTO DEL_MENU_DATA_END
+$!
+$DEL_MENU_DATA_LOOP:
+$!
+$ IF F$TYPE (SSL_MENU_DATA_'SSL_MENU_DATA_MAX') .NES. "" 
+$ THEN
+$     DELETE /SYMBOL /GLOBAL SSL_MENU_DATA_'SSL_MENU_DATA_MAX'
+$     SSL_MENU_DATA_MAX == SSL_MENU_DATA_MAX - 1
+$     GOTO DEL_MENU_DATA_LOOP
+$ ENDIF
+$!
+$ DELETE /SYMBOL /GLOBAL SSL_MENU_DATA_MAX
+$!
+$DEL_MENU_DATA_END:
+$!
+$ IF F$TYPE (SSL_MENU_ITEM_MAX) .NES. "" THEN DELETE /SYMBOL /GLOBAL SSL_MENU_ITEM_MAX
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Display the invalid entry 
+$!------------------------------------------------------------------------------
+$!
+$INVALID_OPTION: SUBROUTINE
+$!
+$ SAY ESC + "[''MSG_ROW';01H", BELL, " Invalid Option, Try again ...''CEOL'"
+$ Wait 00:00:01.5
+$ SAY ESC + "[''MSG_ROW';01H", CEOL
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Exit
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ DEL_MENU_DATA
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$conf_util.com

@@ -0,0 +1,220 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$CONF_UTIL.COM - SSL Configuration Utility procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure gets or sets a given key item in a SSL configuration file.
+$! The parameters used are:
+$!
+$! 	P1	- SSL Configuration File
+$! 	P2	- SSL Configuration Function (i.e. GET/SET)
+$! 	P3	- SSL Configuration Key/Item (delimited by '#')
+$! 	P4	- SSL Configuration Key/Item Value (for SET function only)
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ SSL_CONF_DATA == ""
+$ SAY := WRITE SYS$OUTPUT
+$ ASK := READ SYS$COMMAND /END_OF_FILE=EXIT /PROMPT=
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$!------------------------------------------------------------------------------
+$! Process parameters
+$!------------------------------------------------------------------------------
+$!
+$ KEY_FOUND = 0
+$ ITM_FOUND = 0
+$ P1 = F$EDIT (P1,"TRIM")
+$ P2 = F$EDIT (P2,"TRIM,UPCASE")
+$ KEY = F$ELEMENT (0,"#",P3)
+$ ITM = F$ELEMENT (1,"#",P3)
+$!
+$!------------------------------------------------------------------------------
+$! Process the configuration function
+$!------------------------------------------------------------------------------
+$!
+$ IF P2 .EQS. "GET" THEN GOSUB GET_CONF_DATA
+$ IF P2 .EQS. "SET" THEN GOSUB SET_CONF_DATA
+$!
+$ GOTO EXIT
+$!
+$!------------------------------------------------------------------------------
+$! Get the configuration data
+$!------------------------------------------------------------------------------
+$!
+$GET_CONF_DATA:
+$!
+$ OPEN /READ /ERROR=OPEN_ERROR IFILE 'P1'
+$!
+$GET_CONF_DATA_LOOP:
+$!
+$ READ /ERROR=READ_ERROR /END_OF_FILE=GET_CONF_DATA_END IFILE IREC
+$!
+$ SREC = IREC
+$ IPOS = F$LOCATE ("#",IREC)
+$ IF IPOS .NE. F$LENGTH (IREC) THEN IREC = F$EXTRACT (0,IPOS,IREC)
+$ IREC = F$EDIT (IREC,"COLLAPSE")
+
+$ IF IREC .EQS. "" THEN GOTO GET_CONF_DATA_LOOP
+$!
+$ IF IREC .EQS. KEY 
+$ THEN
+$     KEY_FOUND = 1
+$     GOTO GET_CONF_DATA_LOOP
+$ ENDIF
+$!
+$ IF KEY_FOUND .EQ. 1
+$ THEN 
+$     IF F$EXTRACT (0,1,IREC) .EQS. "[" .AND. F$EXTRACT (F$LENGTH (IREC)-1,1,IREC) .EQS. "]"
+$     THEN
+$         SSL_CONF_DATA == ""
+$         GOTO GET_CONF_DATA_END
+$     ENDIF
+$!
+$     IF ITM .EQS. F$EDIT (F$ELEMENT (0,"=",IREC),"TRIM")
+$     THEN 
+$         VAL = F$EDIT (F$ELEMENT (1,"=",SREC),"TRIM")
+$         SSL_CONF_DATA == "''VAL'"
+$         GOTO GET_CONF_DATA_END
+$     ENDIF
+$ ENDIF
+$!
+$ GOTO GET_CONF_DATA_LOOP
+$!
+$GET_CONF_DATA_END:
+$!
+$ CLOSE /ERROR=CLOSE_ERROR IFILE
+$!
+$ RETURN
+$!
+$!------------------------------------------------------------------------------
+$! Set the configuration data
+$!------------------------------------------------------------------------------
+$!
+$SET_CONF_DATA:
+$!
+$ IF F$SEARCH ("''P1'") .EQS. "" THEN CREATE /NOLOG 'P1'
+$!
+$ OPEN /READ  /ERROR=OPEN_ERROR IFILE 'P1'
+$ OPEN /WRITE /ERROR=OPEN_ERROR OFILE 'P1'
+$!
+$SET_CONF_DATA_LOOP:
+$!
+$ READ /ERROR=READ_ERROR /END_OF_FILE=SET_CONF_DATA_END IFILE IREC
+$!
+$ IF ITM_FOUND .EQ. 1
+$ THEN 
+$     WRITE /ERROR=WRITE_ERROR OFILE IREC
+$     GOTO SET_CONF_DATA_LOOP
+$ ENDIF
+$!
+$ SREC = IREC
+$ IPOS = F$LOCATE ("#",IREC)
+$ IF IPOS .NE. F$LENGTH (IREC) THEN IREC = F$EXTRACT (0,IPOS,IREC)
+$ IREC = F$EDIT (IREC,"COLLAPSE")
+$!
+$ IF IREC .EQS. ""
+$ THEN
+$     WRITE /ERROR=WRITE_ERROR OFILE SREC
+$     GOTO SET_CONF_DATA_LOOP
+$ ENDIF
+$!
+$ IF IREC .EQS. KEY 
+$ THEN
+$     KEY_FOUND = 1
+$     WRITE /ERROR=WRITE_ERROR OFILE SREC
+$     GOTO SET_CONF_DATA_LOOP
+$ ENDIF
+$!
+$ IF KEY_FOUND .EQ. 1
+$ THEN 
+$     IF F$EXTRACT (0,1,IREC) .EQS. "[" .AND. F$EXTRACT (F$LENGTH (IREC)-1,1,IREC) .EQS. "]"
+$     THEN
+$         WRITE /ERROR=WRITE_ERROR OFILE "''ITM' = ''P4'"
+$         WRITE /ERROR=WRITE_ERROR OFILE SREC
+$         ITM_FOUND = 1
+$         GOTO SET_CONF_DATA_LOOP
+$     ENDIF
+$!
+$     IF ITM .EQS. F$EDIT (F$ELEMENT (0,"=",IREC),"TRIM")
+$     THEN 
+$         WRITE /ERROR=WRITE_ERROR OFILE "''ITM' = ''P4'"
+$         ITM_FOUND = 1
+$         GOTO SET_CONF_DATA_LOOP
+$     ENDIF
+$ ENDIF
+$!
+$ WRITE /ERROR=WRITE_ERROR OFILE SREC
+$!
+$ GOTO SET_CONF_DATA_LOOP
+$!
+$SET_CONF_DATA_END:
+$!
+$ IF KEY_FOUND .EQ. 0 
+$ THEN
+$     WRITE /ERROR=WRITE_ERROR OFILE "''KEY'"
+$     WRITE /ERROR=WRITE_ERROR OFILE "''ITM' = ''P4'"
+$ ENDIF
+$!
+$ IF KEY_FOUND .EQ. 1 .AND. ITM_FOUND .EQ. 0
+$ THEN
+$     WRITE /ERROR=WRITE_ERROR OFILE "''ITM' = ''P4'"
+$ ENDIF
+$!
+$ CLOSE IFILE
+$ CLOSE OFILE
+$!
+$ RETURN
+$!
+$!------------------------------------------------------------------------------
+$! File Errors
+$!------------------------------------------------------------------------------
+$!
+$OPEN_ERROR:
+$!
+$ SAY "Open error for file ''P1' ... aborting ''P2'"
+$ GOTO EXIT
+$!
+$READ_ERROR:
+$!
+$ SAY "Read error for file ''P1' ... aborting ''P2'"
+$ GOTO EXIT
+$!
+$WRITE_ERROR:
+$!
+$ SAY "Write error for file ''P1' ... aborting ''P2'"
+$ GOTO EXIT
+$!
+$CLOSE_ERROR:
+$!
+$ SAY "Close error for file ''P1' ... aborting ''P2'"
+$ GOTO EXIT
+$!
+$!------------------------------------------------------------------------------
+$! Exit
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ CLOSE IFILE
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ CLOSE OFILE
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT 1

VMS/cert_tool/ssl$draw_box.com

@@ -0,0 +1,109 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$DRAW_BOX.COM - SSL Draw Box procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure draws a box with the specified coordinates.
+$!
+$! The parameters used are:
+$!
+$! 	P1	- X1 coordinate
+$! 	P2	- Y1 coordinate
+$! 	P3	- X2 coordinate
+$! 	P4	- Y3 coordinate
+$! 	P5	- Box Header (Optional)
+$! 	P6	- Box Footer (Optional)
+$! 	P7	- Fill Box (Optional)
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ SAY := WRITE SYS$OUTPUT
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ FILL_BOX := @SSL$COM:SSL$FILL_BOX
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$ GRPH_ON[0,8] = 14	! Turn GRAPHICS mode On 
+$ GRPH_OFF[0,8] = 15	! Turn GRAPHICS mode Off
+$ NORM = ESC + "[0m"	! Turn Attributes off
+$ BOLD = ESC + "[1m"    ! Turn on BOLD Attribute
+$!
+$!------------------------------------------------------------------------------
+$! Draw the box
+$!------------------------------------------------------------------------------
+$!
+$ X1 = F$INTEGER (P1)
+$ Y1 = F$INTEGER (P2)
+$ X2 = F$INTEGER (P3)
+$ Y2 = F$INTEGER (P4)
+$!
+$ ROW = Y1 + 1
+$ COL = X1 + 1
+$ SIDE1 = X1
+$ SIDE2 = X2 + 1
+$ TOP = "l" + F$FAO("!#*q", x2 - x1) + "k"
+$ BOT = "m" + F$FAO("!#*q", x2 - x1) + "j"
+$!
+$ SAY ESC + "[''Y1';''X1'H", BOLD, GRPH_ON, TOP, GRPH_OFF, NORM
+$!
+$SIDES:
+$!
+$ SAY ESC + "[''ROW';''SIDE1'H",BOLD,GRPH_ON,"x",GRPH_OFF,NORM
+$ SAY ESC + "[''ROW';''SIDE2'H",BOLD,GRPH_ON,"x",GRPH_OFF,NORM
+$!
+$ IF ROW .LT. Y2
+$ THEN
+$     ROW = ROW + 1
+$     GOTO SIDES
+$ ENDIF  
+$!
+$ SAY ESC + "[''Y2';''X1'H", BOLD, GRPH_ON, BOT, GRPH_OFF, NORM
+$!
+$ IF P5 .NES. "" 
+$ THEN 
+$     IF F$LENGTH(P5) .GT. X2 - X1
+$     THEN 
+$	  HEADER = F$EXTRACT (0, (X2 - X1 - 4), P5)
+$     ELSE
+$	  HEADER = P5
+$     ENDIF
+$     COL = X1 + ((X2 - X1 - F$LENGTH(HEADER)) / 2)
+$     SAY ESC + "[''Y1';''COL'H''BOLD'''HEADER'''NORM'"
+$ ENDIF
+$!
+$ IF P6 .NES. "" 
+$ THEN 
+$     IF F$LENGTH(P6) .GT. X2 - X1
+$     THEN 
+$	  FOOTER = F$EXTRACT (0, (X2 - X1 - 4), P6)
+$     ELSE
+$	  FOOTER = P6
+$     ENDIF
+$     COL = X1 + ((X2 - X1 - F$LENGTH(FOOTER)) / 2)
+$     SAY ESC + "[''Y2';''COL'H''BOLD'''FOOTER'''NORM'"
+$ ENDIF
+$!
+$ IF P7 .EQS. "" .OR. P7 .EQS. "Y" THEN FILL_BOX 'X1' 'Y1' 'X2' 'Y2'
+$!
+$ GOTO EXIT
+$!
+$!------------------------------------------------------------------------------
+$! Exit 
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$exit_cmd.tpu

@@ -0,0 +1 @@
+EXIT

VMS/cert_tool/ssl$fill_box.com

@@ -0,0 +1,65 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$FILL_BOX.COM - SSL Fill Box procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure draws a box with the specified coordinates.
+$!
+$! The parameters used are:
+$!
+$! 	P1	- X1 coordinate
+$! 	P2	- Y1 coordinate
+$! 	P3	- X2 coordinate
+$! 	P4	- Y2 coordinate
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ SAY := WRITE SYS$OUTPUT
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$!
+$!------------------------------------------------------------------------------
+$! Draw the box
+$!------------------------------------------------------------------------------
+$!
+$ X1 = F$INTEGER (P1)
+$ Y1 = F$INTEGER (P2)
+$ X2 = F$INTEGER (P3)
+$ Y2 = F$INTEGER (P4)
+$!
+$ ROW = Y1 + 1
+$ COL = X1 + 1
+$ FILL = F$FAO("!#* ", X2 - X1)
+$!
+$FILL_LOOP:
+$!
+$ IF ROW .LT. Y2
+$ THEN
+$     SAY ESC + "[''ROW';''COL'H",FILL
+$     ROW = ROW + 1
+$     GOTO FILL_LOOP
+$ ENDIF  
+$!
+$ GOTO EXIT
+$!
+$!------------------------------------------------------------------------------
+$! Exit 
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$hash_cert.com

@@ -0,0 +1,235 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$HASH_CERT.COM - SSL Hash Certificate procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure prompts the user through hashing Certificates.
+$!
+$! The parameters used are:
+$!
+$! 	P1	- Certificate or Certificate Revocation List (i.e. "CRT" or "CRL")
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ DELETE := DELETE
+$ SAY := WRITE SYS$OUTPUT
+$ ASK := READ SYS$COMMAND /END_OF_FILE=EXIT /PROMPT=
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ TT_ROWS = F$GETDVI ("TT:","TT_PAGE")
+$ TT_COLS = F$GETDVI ("TT:","DEVBUFSIZ")
+$!
+$ INIT_TERM := @SSL$COM:SSL$INIT_TERM
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$ BELL[0,8] = 7 	! Ring the terminal Bell
+$ RED = 1		! Color - Red
+$ FGD = 30		! Foreground
+$ BGD = 0		! Background
+$ CSCR = ESC + "[2J"	! Clear the Screen 
+$ CEOS = ESC + "[0J"	! Clear to the End of the Screen 
+$ CEOL = ESC + "[0K"	! Clear to the End of the Line
+$ NORM = ESC + "[0m"	! Turn Attributes off
+$ BLNK = ESC + "[5m"    ! Turn on BLINK Attribute
+$ WIDE = ESC + "#6"     ! Turn on WIDE Attribute
+$!
+$!------------------------------------------------------------------------------
+$! Run the SSL setup if it hasn't been run yet
+$!------------------------------------------------------------------------------
+$!
+$ IF F$TRNLNM ("SSL$ROOT") .EQS. ""
+$ THEN
+$     IF F$SEARCH ("SSL$COM:SSL$INIT_ENV.COM") .NES. ""
+$     THEN 
+$         @SSL$COM:SSL$INIT_ENV.COM
+$     ELSE
+$         SAY BELL, "Unable to locate SSL$COM:SSL$INIT_ENV.COM ..."
+$	  GOTO EXIT
+$     ENDIF
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Display the Page Header
+$!------------------------------------------------------------------------------
+$!
+$ INIT_TERM
+$ BCOLOR = BGD
+$ FCOLOR = FGD + RED
+$ COLOR = ESC + "[''BCOLOR';''FCOLOR'm"
+$!
+$ TEXT = "SSL Certificate Tool"
+$ COL = (TT_COLS - (F$LENGTH (TEXT) * 2)) / 4
+$!
+$ SAY ESC + "[01;01H", CSCR
+$ SAY ESC + "[02;''COL'H", COLOR, WIDE, TEXT, NORM
+$!
+$ IF P1 .EQS. "CRT"
+$ THEN 
+$     TEXT = "Hash Certification Authorities"
+$ ELSE
+$     TEXT = "Hash Certificate Revocations"
+$ ENDIF
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[04;01H"
+$ SAY ESC + "[04;''COL'H", COLOR, TEXT, NORM
+$!
+$ CTR = 1
+$ ROW = 6
+$ COL = 2
+$ TOP_ROW = ROW
+$ MSG_ROW = TT_ROWS - 1
+$!
+$!------------------------------------------------------------------------------
+$! Initialize the Request Data
+$!------------------------------------------------------------------------------
+$!
+$ IF P1 .EQS. "CRT"
+$ THEN 
+$     PRM = "Certificate Path:"
+$     DEF = "SSL$CRT:*.CRT"
+$ ENDIF
+$!
+$ IF P1 .EQS. "CRL"
+$ THEN 
+$     PRM = "Certificate Revocation Path:"
+$     DEF = "SSL$CRT:*.CRL"
+$ ENDIF
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$!
+$!------------------------------------------------------------------------------
+$! Confirm/Update the SSL Configuration Data
+$!------------------------------------------------------------------------------
+$!
+$PROMPT_LOOP:
+$!
+$ PROMPT = ESC + "[''ROW';''COL'H''PRM' ? [''DEF'] ''CEOL'"
+$ ASK "''PROMPT'" _hash_path_name
+$ _hash_path_name = F$EDIT (_hash_path_name,"TRIM")
+$ IF _hash_path_name .EQS. "" THEN _hash_path_name = DEF
+$!
+$ HASH_DEV = F$PARSE (_hash_path_name,DEF,,"DEVICE")
+$ HASH_DIR = F$PARSE (_hash_path_name,DEF,,"DIRECTORY")
+$ HASH_NAM = F$PARSE (_hash_path_name,DEF,,"NAME")
+$ HASH_TYP = F$PARSE (_hash_path_name,DEF,,"TYPE")
+$ _hash_path_name = HASH_DEV + HASH_DIR + HASH_NAM + HASH_TYP
+$!
+$!------------------------------------------------------------------------------
+$! Create the Certificiate Hashes 
+$!------------------------------------------------------------------------------
+$!
+$ IF P1 .EQS. "CRT"
+$ THEN 
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Hashing Certificate Authorities ...", NORM, CEOL
+$ ENDIF
+$!
+$ IF P1 .EQS. "CRL"
+$ THEN 
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Hashing Certificate Revocations ...", NORM, CEOL
+$ ENDIF
+$!
+$ IF F$SEARCH ("''HASH_DEV'''HASH_DIR'DELETE_HASH_FILES.COM") .NES. ""
+$ THEN 
+$    @'HASH_DEV''HASH_DIR'DELETE_HASH_FILES.COM
+$    DELETE 'HASH_DEV''HASH_DIR'DELETE_HASH_FILES.COM;*
+$ ENDIF
+$!
+$ CTR = 0
+$!     
+$ OPEN /WRITE OFILE 'HASH_DEV''HASH_DIR'DELETE_HASH_FILES.COM
+$!
+$CERT_LOOP:
+$!
+$ CERT_FILE = F$SEARCH ("''_hash_path_name'", 1)
+$ IF CERT_FILE .EQS. "" THEN GOTO CERT_END
+$ CTR = CTR + 1
+$!
+$ CALL HASH_CERT 'P1' 'CERT_FILE'
+$!
+$ GOTO CERT_LOOP
+$!
+$CERT_END:
+$!
+$ CLOSE OFILE
+$!
+$ IF CTR .EQ. 0 
+$ THEN 
+$     TEXT = "No files found, Press return to continue"
+$ ELSE
+$     TEXT = "Press return to continue"
+$ ENDIF
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ IF CTR .EQ. 0 
+$ THEN 
+$     SAY BELL, ESC + "[''MSG_ROW';01H", CEOS
+$ ELSE
+$     SAY ESC + "[''MSG_ROW';01H", CEOS
+$ ENDIF
+$ PROMPT = ESC + "[''MSG_ROW';''COL'H''TEXT'"
+$ ASK "''PROMPT'" OPT
+$!
+$ GOTO EXIT
+$!
+$!------------------------------------------------------------------------------
+$! Hash Certificate Subroutine
+$!------------------------------------------------------------------------------
+$!
+$HASH_CERT: SUBROUTINE
+$!
+$ IF P1 .EQS. "CRT"
+$ THEN 
+$     HASH_SUFF = ""
+$     HASH_FUNC = "$SSL$EXE:OPENSSL X509 -HASH -NOOUT -IN"
+$ ELSE
+$     HASH_SUFF = "R"
+$     HASH_FUNC = "$SSL$EXE:OPENSSL CRL -HASH -NOOUT -IN"
+$ ENDIF
+$!
+$ PIPE HASH_FUNC 'P2' | (READ SYS$INPUT VAL ; DEFINE/NOLOG/JOB HASH_VAL &VAL)
+$ HASH_VAL = F$TRNLNM ("HASH_VAL")
+$ DEASSIGN /JOB HASH_VAL
+$!
+$ IDX = 0
+$!
+$IDX_LOOP:
+$!
+$ HASH_FILE = "''HASH_DEV'''HASH_DIR'''HASH_VAL'.''HASH_SUFF'''IDX'"
+$ IF F$SEARCH ("''HASH_FILE'") .NES. ""
+$ THEN
+$     IDX = IDX + 1
+$     GOTO IDX_LOOP
+$ ENDIF
+$!
+$ COPY 'P2' 'HASH_FILE'
+$ WRITE OFILE "$ DELETE ''HASH_FILE';*"
+$!
+$ EXIT
+$!
+$ ENDSUBOUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Exit the procedure
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ CLOSE OFILE
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$init_env.com

@@ -0,0 +1,61 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$INIT_ENV.COM - SSL Initialize Environment
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure sets up the SSL environment logicals & symbols.
+$!
+$! P1 = Mode of the logicals (ie - "/SYSTEM/EXECUTIVE_MODE").
+$!      Note - if P1 is not passed in, P1 will default to PROCESS.
+$!
+$!------------------------------------------------------------------------------
+$! Initialization 
+$!------------------------------------------------------------------------------
+$!
+$ IF F$TRNLNM("SSL$ROOT") .EQS. ""
+$ THEN
+$    WRITE SYS$OUTPUT " "
+$    WRITE SYS$OUTPUT " SSL-E-ERROR, SSL has not been started."
+$    WRITE SYS$OUTPUT " "
+$    WRITE SYS$OUTPUT " Execute the command procedure, SYS$STARTUP:SSL$STARTUP.COM, and then try this procedure again."
+$    WRITE SYS$OUTPUT " "
+$    EXIT
+$ ENDIF
+$!
+$ IF P1 .EQS. ""
+$ THEN
+$    P1 = "/PROCESS"
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Define logicals
+$!------------------------------------------------------------------------------
+$!
+$ DEFINE 'P1 	SSL$CA_CONF	SSL$ROOT:[CONF]SSL$CA.CNF
+$ DEFINE 'P1 	SSL$CONF	SSL$ROOT:[CONF]SSL$CERT.CNF
+$ DEFINE 'P1 	SSL$COM		SSL$ROOT:[COM]
+$ DEFINE 'P1	SSL$CRT		SSL$ROOT:[CERTS]
+$ DEFINE 'P1 	SSL$CSR		SSL$ROOT:[CERTS]
+$ DEFINE 'P1 	SSL$KEY		SSL$ROOT:[CERTS]
+$ DEFINE 'P1 	SSL$DB		SSL$ROOT:[PRIVATE]
+$!
+$!------------------------------------------------------------------------------
+$! Define foreign symbols
+$!------------------------------------------------------------------------------
+$!
+$ OPENSSL	:== $ SSL$EXE:OPENSSL
+$ HOSTADDR	:== $ SSL$EXE:SSL$HOSTADDR
+$ HOSTNAME	:== $ SSL$EXE:SSL$HOSTNAME
+$!
+$!------------------------------------------------------------------------------
+$! Exit
+$!------------------------------------------------------------------------------
+$!
+$ EXIT

VMS/cert_tool/ssl$init_term.com

@@ -0,0 +1,55 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$INIT_TERM.COM - SSL Initialize Terminal procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure initializes the terminal attributes.
+$!
+$! The parameters used are:
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ EDIT := EDIT
+$!
+$!------------------------------------------------------------------------------
+$! Initialize the terminal with TPU
+$!------------------------------------------------------------------------------
+$!
+$ IF F$SEARCH ("SSL$COM:SSL$EXIT_CMD.TPU") .EQS. ""
+$ THEN 
+$     OPEN /WRITE OFILE SSL$COM:SSL$EXIT_CMD.TPU
+$     WRITE OFILE "EXIT"
+$     CLOSE OFILE
+$ ENDIF
+$!
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$INPUT  SYS$COMMAND
+$ EDIT /TPU /COMMAND=OPENSS$COM:SSL$EXIT_CMD.TPU
+$!
+$!------------------------------------------------------------------------------
+$! Exit 
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ CLOSE OFILE
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$pick_file.com

@@ -0,0 +1,230 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$PICK_FILE.COM - SSL Pick File procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure display the contents of a given file in a box size specified.
+$!
+$! The parameters used are:
+$!
+$! 	P1	- File Spec to Parse
+$! 	P2	- X1 coordinate
+$! 	P3	- Y1 coordinate
+$! 	P4	- X2 coordinate
+$! 	P5	- Y3 coordinate
+$! 	P6	- File Pick Header (Optional)
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ SSL_FILE_NAME == ""
+$ SAY := WRITE SYS$OUTPUT
+$ ASK := READ SYS$COMMAND /END_OF_FILE=EXIT /PROMPT=
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ DRAW_BOX := @SSL$COM:SSL$DRAW_BOX
+$ FILL_BOX := @SSL$COM:SSL$FILL_BOX
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$ BELL[0,8] = 7 	! Ring the terminal Bell
+$ CEOL = ESC + "[0K"	! Clear to the End of the Line
+$ NORM = ESC + "[0m"	! Turn Attributes off
+$ BOLD = ESC + "[1m"    ! Turn on BOLD Attribute
+$!
+$!------------------------------------------------------------------------------
+$! Display the Page Header
+$!------------------------------------------------------------------------------
+$!
+$ P1 = F$EDIT (P1, "TRIM")
+$ P2 = F$INTEGER (P2)
+$ P3 = F$INTEGER (P3)
+$ P4 = F$INTEGER (P4)
+$ P5 = F$INTEGER (P5)
+$ FILE_MAX = 0
+$!
+$SEARCH_LOOP:
+$!
+$ FILE = F$SEARCH ("''P1'",1)
+$ IF FILE .NES. ""
+$ THEN 
+$     IF FILE_MAX .EQ. 1
+$     THEN
+$         IF FILE_1 .EQS. FILE THEN GOTO SEARCH_END
+$     ENDIF
+$     FILE_MAX = FILE_MAX + 1
+$     FILE_'FILE_MAX' = FILE
+$     GOTO SEARCH_LOOP
+$ ENDIF
+$!
+$SEARCH_END:
+$!
+$ IF FILE_MAX .EQ. 0 
+$ THEN 
+$     DRAW_BOX 'P2' 'P3' 'P4' 'P5' "''P6'" " No Files Found, Press Return to Exit "
+$     INPUT_ROW = P5 + 1
+$     PROMPT = ESC + "[''INPUT_ROW';01H ''CEOL'"
+$     ASK "''PROMPT'" OPT
+$     GOTO EXIT
+$ ENDIF
+$!
+$ COL = P2 + 2
+$ ROW = P3 + 2
+$ TOP_ROW = ROW
+$ INPUT_ROW = P5 + 1
+$ BOX_WIDTH = P4 - (P2 + 2)
+$ BOX_HEIGHT = P5 - (P3 + 3)
+$!
+$ FILE_CTR = 1
+$ PAGE_CTR = 1
+$ PAGE_'PAGE_CTR'_FILE_CTR = FILE_CTR
+$ FILES_PER_PAGE = BOX_HEIGHT
+$ PAGE_MAX = FILE_MAX / FILES_PER_PAGE
+$ IF PAGE_MAX * FILES_PER_PAGE .LT. FILE_MAX THEN PAGE_MAX = PAGE_MAX + 1
+$!
+$ DRAW_BOX 'P2' 'P3' 'P4' 'P5' "''P6'" " Enter B for Back, N for Next, Ctrl-Z to Exit or Enter a File Number "
+$ PAGE_TXT = F$FAO (" Page !UL of !UL ", PAGE_CTR, PAGE_MAX)
+$ _COL = P2 + (BOX_WIDTH - F$LENGTH (PAGE_TXT)) + 2
+$ SAY ESC + "[''P3';''_COL'H''BOLD'''PAGE_TXT'''NORM'"
+$!
+$DISPLAY_LOOP:
+$!
+$ IF FILE_CTR .LE. FILE_MAX .AND. F$TYPE (FILE_'FILE_CTR') .NES. ""
+$ THEN 
+$     FILE = FILE_'FILE_CTR'
+$ ELSE
+$     FILE = ""
+$ ENDIF
+$ WRAP_IN_PROGRESS = 0
+$!
+$WRAP_LOOP:
+$!
+$ IF ROW .LE. (P5 - 2) .AND. -
+     FILE_CTR .LE. PAGE_CTR * FILES_PER_PAGE
+$ THEN
+$     IF F$LENGTH (FILE) .GT. BOX_WIDTH 
+$     THEN 
+$ 	  IF WRAP_IN_PROGRESS .EQ. 0
+$	  THEN 
+$	      CTR_TXT = F$FAO ("!3UL. ",FILE_CTR)
+$	      WRAP_IN_PROGRESS = 1
+$	  ELSE
+$	      CTR_TXT = "     "
+$         ENDIF
+$	  FILE_SEG = F$EXTRACT (0, BOX_WIDTH - F$LENGTH (CTR_TXT), FILE)
+$         SAY ESC + "[''ROW';''COL'H''BOLD'''CTR_TXT'''NORM'''FILE_SEG'"
+$         FILE = F$EXTRACT (BOX_WIDTH - F$LENGTH (CTR_TXT), F$LENGTH (FILE) - (BOX_WIDTH + F$LENGTH (CTR_TXT)), FILE)
+$         ROW = ROW + 1
+$	  GOTO WRAP_LOOP
+$     ELSE
+$	  IF FILE .NES. ""
+$	  THEN
+$ 	      IF WRAP_IN_PROGRESS .EQ. 0
+$	      THEN 
+$	          CTR_TXT = F$FAO ("!3UL. ",FILE_CTR)
+$	      ELSE
+$	          CTR_TXT = "     "
+$             ENDIF
+$             SAY ESC + "[''ROW';''COL'H''BOLD'''CTR_TXT'''NORM'''FILE'"
+$	  ENDIF
+$     ENDIF
+$ ELSE
+$!
+$RETRY:
+$!
+$     PROMPT = ESC + "[''INPUT_ROW';01H ''CEOL'"
+$     ASK "''PROMPT'" OPT
+$     IF F$TYPE (OPT) .NES. "INTEGER" .AND. -
+         F$EDIT (OPT,"TRIM,UPCASE") .NES. "B" .AND. -
+	 F$EDIT (OPT,"TRIM,UPCASE") .NES. "N" 
+$     THEN
+$         CALL INVALID_ENTRY
+$	  GOTO RETRY
+$     ENDIF
+$     IF F$TYPE (OPT) .EQS. "INTEGER" 
+$     THEN
+$	  IF OPT .GT. 0 .AND. -
+  	     OPT .LE. FILE_MAX .AND. -
+	     OPT .LE. (FILE_CTR - 1) .AND. -
+	     OPT .GE. (FILE_CTR - 1 - FILES_PER_PAGE)
+$	  THEN 
+$	      SSL_FILE_NAME == FILE_'OPT'
+$	      GOTO EXIT
+$	  ELSE
+$             CALL INVALID_ENTRY
+$	      GOTO RETRY
+$	  ENDIF
+$     ENDIF
+$     IF F$EDIT (OPT,"TRIM,UPCASE") .EQS. "B"
+$     THEN
+$	  IF PAGE_CTR .GT. 1
+$	  THEN
+$ 	      ROW = TOP_ROW
+$	      PAGE_CTR = PAGE_CTR - 1
+$ 	      FILE_CTR = PAGE_'PAGE_CTR'_FILE_CTR
+$             PAGE_TXT = F$FAO (" Page !UL of !UL ", PAGE_CTR, PAGE_MAX)
+$             _COL = P2 + (BOX_WIDTH - F$LENGTH (PAGE_TXT)) + 2
+$             SAY ESC + "[''P3';''_COL'H''BOLD'''PAGE_TXT'''NORM'"
+$             FILL_BOX 'P2' 'P3' 'P4' 'P5'
+$	      GOTO DISPLAY_LOOP
+$	  ELSE
+$             CALL INVALID_ENTRY
+$	      GOTO RETRY
+$         ENDIF
+$     ENDIF
+$     IF F$EDIT (OPT,"TRIM,UPCASE") .EQS. "N"
+$     THEN
+$	  IF PAGE_CTR .LT. PAGE_MAX
+$	  THEN
+$	      PAGE_CTR = PAGE_CTR + 1
+$ 	      PAGE_'PAGE_CTR'_FILE_CTR = FILE_CTR
+$ 	      FILE_CTR = PAGE_'PAGE_CTR'_FILE_CTR
+$             PAGE_TXT = F$FAO (" Page !UL of !UL ", PAGE_CTR, PAGE_MAX)
+$             _COL = P2 + (BOX_WIDTH - F$LENGTH (PAGE_TXT)) + 2
+$             SAY ESC + "[''P3';''_COL'H''BOLD'''PAGE_TXT'''NORM'"
+$             FILL_BOX 'P2' 'P3' 'P4' 'P5'
+$	  ELSE
+$             CALL INVALID_ENTRY
+$	      GOTO RETRY
+$         ENDIF
+$     ENDIF
+$     FILL_BOX 'P2' 'P3' 'P4' 'P5'
+$     ROW = TOP_ROW
+$     GOTO WRAP_LOOP
+$ ENDIF
+$ FILE_CTR = FILE_CTR + 1
+$ ROW = ROW + 1
+$ GOTO DISPLAY_LOOP
+$!
+$!------------------------------------------------------------------------------
+$! Display the invalid entry 
+$!------------------------------------------------------------------------------
+$!
+$INVALID_ENTRY: SUBROUTINE
+$!
+$ SAY ESC + "[''INPUT_ROW';01H", BELL, " Invalid Entry, Try again ...''CEOL'"
+$ Wait 00:00:01.5
+$ SAY ESC + "[''INPUT_ROW';01H", CEOL
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Exit
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$rem_env.com

@@ -0,0 +1,62 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$REM_ENV.COM - Remove the SSL Initialize Environment
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure deletes the SSL environment logicals & symbols set up by
+$! SSL$INIT_ENV.COM.
+$!
+$! P1 = Mode of the logicals (ie - "/SYSTEM/EXECUTIVE_MODE").
+$!      Note - if P1 is not passed in, P1 will default to PROCESS.
+$!
+$!------------------------------------------------------------------------------
+$! Initialization 
+$!------------------------------------------------------------------------------
+$!
+$ IF F$TRNLNM("SSL$ROOT") .EQS. ""
+$ THEN
+$    WRITE SYS$OUTPUT " "
+$    WRITE SYS$OUTPUT " SSL-E-ERROR, SSL has not been started."
+$    WRITE SYS$OUTPUT " "
+$    WRITE SYS$OUTPUT " Execute the command procedure, SYS$STARTUP:SSL$STARTUP.COM, and then try this procedure again."
+$    WRITE SYS$OUTPUT " "
+$    EXIT
+$ ENDIF
+$!
+$ IF P1 .EQS. ""
+$ THEN
+$    P1 = "/PROCESS"
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Define logicals
+$!------------------------------------------------------------------------------
+$!
+$ DEASSIGN 'P1 	SSL$CA_CONF
+$ DEASSIGN 'P1 	SSL$CONF
+$ DEASSIGN 'P1 	SSL$COM
+$ DEASSIGN 'P1	SSL$CRT
+$ DEASSIGN 'P1 	SSL$CSR
+$ DEASSIGN 'P1 	SSL$KEY
+$ DEASSIGN 'P1 	SSL$DB
+$!
+$!------------------------------------------------------------------------------
+$! Define foreign symbols
+$!------------------------------------------------------------------------------
+$!
+$ DELETE/SYMBOL/GLOBAL OPENSSL
+$ DELETE/SYMBOL/GLOBAL HOSTADDR
+$ DELETE/SYMBOL/GLOBAL HOSTNAME
+$!
+$!------------------------------------------------------------------------------
+$! Exit
+$!------------------------------------------------------------------------------
+$!
+$ EXIT

VMS/cert_tool/ssl$rqst_cert.com

@@ -0,0 +1,769 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$RQST_CERT.COM - SSL Certificate Request procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure prompts the user through creating a Certificate Request.
+$!
+$! There are no parameters used.
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ DELETE := DELETE
+$ SAY := WRITE SYS$OUTPUT
+$ ASK := READ SYS$COMMAND /END_OF_FILE=EXIT /PROMPT=
+$ PID = F$GETJPI ("","PID")
+$ TT_NOECHO = F$GETDVI ("TT:","TT_NOECHO")
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ TT_ROWS = F$GETDVI ("TT:","TT_PAGE")
+$ TT_COLS = F$GETDVI ("TT:","DEVBUFSIZ")
+$!
+$ GET_USER_DATA := CALL GET_USER_DATA
+$ SET_USER_DATA := CALL SET_USER_DATA
+$ DEL_USER_DATA := CALL DEL_USER_DATA
+$ INIT_TERM := @SSL$COM:SSL$INIT_TERM
+$ SHOW_FILE := @SSL$COM:SSL$SHOW_FILE 
+$ SSL_CONF_FILE = F$TRNLNM ("SSL$CONF")
+$ GET_CONF_DATA := @SSL$COM:SSL$CONF_UTIL 'SSL_CONF_FILE' GET
+$ SET_CONF_DATA := @SSL$COM:SSL$CONF_UTIL 'SSL_CONF_FILE' SET
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$ BELL[0,8] = 7 	! Ring the terminal Bell
+$ RED = 1		! Color - Red
+$ FGD = 30		! Foreground
+$ BGD = 0		! Background
+$ CSCR = ESC + "[2J"	! Clear the Screen 
+$ CEOS = ESC + "[0J"	! Clear to the End of the Screen 
+$ CEOL = ESC + "[0K"	! Clear to the End of the Line
+$ NORM = ESC + "[0m"	! Turn Attributes off
+$ BLNK = ESC + "[5m"    ! Turn on BLINK Attribute
+$ WIDE = ESC + "#6"     ! Turn on WIDE Attribute
+$!
+$!------------------------------------------------------------------------------
+$! Run the SSL setup if it hasn't been run yet
+$!------------------------------------------------------------------------------
+$!
+$ IF F$TRNLNM ("SSL$ROOT") .EQS. ""
+$ THEN
+$     IF F$SEARCH ("SSL$COM:SSL$INIT_ENV.COM") .NES. ""
+$     THEN 
+$         @SSL$COM:SSL$INIT_ENV.COM
+$     ELSE
+$         SAY BELL, "Unable to locate SSL$COM:SSL$INIT_ENV.COM ..."
+$	  GOTO EXIT
+$     ENDIF
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Display the Page Header
+$!------------------------------------------------------------------------------
+$!
+$ INIT_TERM
+$ BCOLOR = BGD
+$ FCOLOR = FGD + RED
+$ COLOR = ESC + "[''BCOLOR';''FCOLOR'm"
+$!
+$ TEXT = "SSL Certificate Tool"
+$ COL = (TT_COLS - (F$LENGTH (TEXT) * 2)) / 4
+$!
+$ SAY ESC + "[01;01H", CSCR
+$ SAY ESC + "[02;''COL'H", COLOR, WIDE, TEXT, NORM
+$!
+$ TEXT = "Create Certificate Request"
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[04;01H"
+$ SAY ESC + "[04;''COL'H", COLOR, TEXT, NORM
+$!
+$ ROW = 6
+$ COL = 2
+$ TOP_ROW = ROW
+$ MSG_ROW = TT_ROWS - 1
+$!
+$!------------------------------------------------------------------------------
+$! Initialize the Request Data
+$!------------------------------------------------------------------------------
+$!
+$ IF F$SEARCH ("''SSL_CONF_FILE'") .NES. ""
+$ THEN 
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Reading Configuration ...", NORM
+$ ELSE
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Initializing Configuration ...", NORM
+$ ENDIF
+$!
+$ _request_name = "req"
+$!
+$ _distinguished_name = "REQ_distinguished_name"
+$ _distinguished_name_upd = "Y"
+$!
+$ _default_bits = "1024"
+$ _default_bits_upd = "Y"
+$!
+$ _default_keyfile = "SSL$KEY:SERVER.KEY"
+$ _default_keyfile_upd = "Y"
+$!
+$ _default_csrfile = "SSL$CSR:SERVER.CSR"
+$ _default_csrfile_upd = "Y"
+$!
+$ _countryName_prompt = "Country Name ?"
+$ _countryName_min = "2"
+$ _countryName_max = "2"
+$ _countryName_default = "US"
+$ _countryName_upd = "Y"
+$ _countryName_cnt = 4
+$!
+$ _stateOrProvinceName_prompt = "State or Province Name ?"
+$ _stateOrProvinceName_default = ""
+$ _stateOrProvinceName_upd = "Y"
+$ _stateOrProvinceName_cnt = 2
+$!
+$ _localityName_prompt = "City Name ?"
+$ _localityName_default = ""
+$ _localityName_upd = "Y"
+$ _localityName_cnt = 2
+$!
+$ _0organizationName_prompt = "Organization Name ?"
+$ _0organizationName_default = ""
+$ _0organizationName_upd = "Y"
+$ _0organizationName_cnt = 2
+$!
+$ _organizationalUnitName_prompt = "Organization Unit Name ?"
+$ _organizationalUnitName_default = ""
+$ _organizationalUnitName_upd = "Y"
+$ _organizationalUnitName_cnt = 2
+$!
+$ _commonName_prompt = "Common Name ?"
+$ _commonName_max = "64"
+$ HOSTNAME -s _commonName_default
+$ _commonName_upd = "Y"
+$ _commonName_cnt = 3
+$!
+$ _emailAddress_prompt = "Email Address ?"
+$ _emailAddress_max = "40"
+$ _emailAddress_default = "webmaster@''_commonName_default'"
+$ _emailAddress_upd = "Y"
+$ _emailAddress_cnt = 3
+$!
+$ IF F$SEARCH ("''SSL_CONF_FILE'") .NES. ""
+$ THEN 
+$     GET_CONF_DATA "[''_request_name']#distinguished_name"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _distinguished_name = SSL_CONF_DATA
+$         _distinguished_name_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_request_name']#default_bits"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _default_bits = SSL_CONF_DATA
+$         _default_bits_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_request_name']#default_keyfile"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _default_keyfile = F$PARSE (SSL_CONF_DATA,"SSL$ROOT:",,"DEVICE") + -
+ 		             F$PARSE (SSL_CONF_DATA,"[KEY]",,"DIRECTORY") + -
+ 		             F$PARSE (SSL_CONF_DATA,"SERVER",,"NAME") + -
+ 		             F$PARSE (SSL_CONF_DATA,".KEY",,"TYPE") 
+$         _default_keyfile_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_request_name']#default_csrfile"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _default_csrfile = F$PARSE (SSL_CONF_DATA,"SSL$ROOT:",,"DEVICE") + -
+ 		             F$PARSE (SSL_CONF_DATA,"[CSR]",,"DIRECTORY") + -
+ 		             F$PARSE (SSL_CONF_DATA,"SERVER",,"NAME") + -
+ 		             F$PARSE (SSL_CONF_DATA,".CSR",,"TYPE") 
+$         _default_csrfile_upd = "N"
+$     ENDIF
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#countryName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _countryName_prompt = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#countryName_min"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _countryName_min = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#countryName_max"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _countryName_max = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#countryName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _countryName_default = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     IF _countryName_cnt .EQ. CTR THEN _countryName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#stateOrProvinceName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _stateOrProvinceName_prompt = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#stateOrProvinceName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _stateOrProvinceName_default = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     IF _stateOrProvinceName_cnt .EQ. CTR THEN _stateOrProvinceName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#localityName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _localityName_prompt = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#localityName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _localityName_default = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     IF _localityName_cnt .EQ. CTR THEN _localityName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#0.organizationName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _0organizationName_prompt = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#0.organizationName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _0organizationName_default = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     IF _0organizationName_cnt .EQ. CTR THEN _0organizationName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#organizationalUnitName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _organizationalUnitName_prompt = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#organizationalUnitName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _organizationalUnitName_default = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     IF _organizationalUnitName_cnt .EQ. CTR THEN _organizationalUnitName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#commonName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _commonName_prompt = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#commonName_max"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _commonName_max = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#commonName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _commonName_default = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     IF _commonName_cnt .EQ. CTR THEN _commonName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#emailAddress"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _emailAddress_prompt = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#emailAddress_max"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _emailAddress_max = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#emailAddress_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _emailAddress_default = SSL_CONF_DATA
+$         CTR = CTR + 1
+$     ENDIF
+$     IF _emailAddress_cnt .EQ. CTR THEN _emailAddress_upd = "N"
+$ ENDIF
+$!
+$ SET_USER_DATA "[]#encrypt_key#-#N#Encrypt Private Key ?#S##1##Y#N"
+$ SET_USER_DATA "[]#pem_pass_phrase#-##PEM Pass Phrase ?#P#1###Y#Y"
+$ SET_USER_DATA "[''_request_name']#default_bits#D#''_default_bits'#Encryption Bits ?#I###''_default_bits_upd'#Y#N"
+$ SET_USER_DATA "[''_request_name']#default_keyfile#D#''_default_keyfile'#Certificate Key File ?#F###''_default_keyfile_upd'#Y#N"
+$ SET_USER_DATA "[''_request_name']#default_csrfile#D#''_default_csrfile'#Certificate Request File ?#F###''_default_csrfile_upd'#Y#N"
+$ SET_USER_DATA "[''_request_name']#distinguished_name#D#''_distinguished_name'##S###''_distinguished_name_upd'#N#N"
+$ SET_USER_DATA "[''_distinguished_name']#countryName#P#''_countryName_default'#''_countryName_prompt'#S#''_countryName_min'#''_countryName_max'#''_countryName_upd'#Y#N" 
+$ SET_USER_DATA "[''_distinguished_name']#stateOrProvinceName#P#''_stateOrProvinceName_default'#''_stateOrProvinceName_prompt'#S###''_stateOrProvinceName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#localityName#P#''_localityName_default'#''_localityName_prompt'#S###''_localityName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#0.organizationName#P#''_0organizationName_default'#''_0organizationName_prompt'#S###''_0organizationName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#organizationalUnitName#P#''_organizationalUnitName_default'#''_organizationalUnitName_prompt'#S###''_organizationUnitName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#commonName#P#''_commonName_default'#''_commonName_prompt'#S##''_commonName_max'#''_commonName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#emailAddress#P#''_emailAddress_default'#''_emailAddress_prompt'#S##''_emailAddress_max'#''_emailAddress_upd'#Y#N"
+$ SET_USER_DATA "[]#display_certificate#-#N#Display the Certificate ?#S##1##Y#N"
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$!
+$!------------------------------------------------------------------------------
+$! Confirm/Update the SSL Configuration Data
+$!------------------------------------------------------------------------------
+$!
+$ CTR = 1
+$!
+$PROMPT_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN 
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     TYP = F$ELEMENT (5,"#",SSL_USER_DATA_'CTR') ! Value Type
+$     MIN = F$ELEMENT (6,"#",SSL_USER_DATA_'CTR') ! Value Minimum Length
+$     MAX = F$ELEMENT (7,"#",SSL_USER_DATA_'CTR') ! Value Maximum Length
+$     UPD = F$ELEMENT (8,"#",SSL_USER_DATA_'CTR') ! Entry Updated ?
+$     REQ = F$ELEMENT (9,"#",SSL_USER_DATA_'CTR') ! Entry Required for Input ?
+$     CFM = F$ELEMENT (10,"#",SSL_USER_DATA_'CTR')! Confirm Input  ?
+$!
+$! The PEM Pass Phrase prompt is dependant on the answer to encrypt the private key
+$!
+$     IF KEY .EQS. "[]" .AND. ITM .EQS. "pem_pass_phrase"
+$     THEN
+$         GET_USER_DATA "[]#encrypt_key"
+$ 	  _encrypt_key = SSL_USER_DATA
+$         IF F$EDIT (_encrypt_key,"UPCASE") .NES. "Y"
+$	  THEN
+$             CTR = CTR + 1
+$             GOTO PROMPT_LOOP
+$	  ENDIF
+$     ENDIF
+$!
+$     CONFIRMED = 0
+$     IF REQ .EQS. "N"
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO PROMPT_LOOP
+$     ENDIF
+$     IF ROW .GT. MSG_ROW - 2
+$     THEN 
+$         SAY ESC + "[''TOP_ROW';01H", CEOS
+$	  ROW = TOP_ROW
+$     ENDIF
+$!
+$CONFIRM_LOOP:
+$!
+$     IF PRM .EQS. "" 
+$     THEN 
+$         PROMPT = ESC + "[''ROW';''COL'H''ITM' ? [''DEF'] ''CEOL'"
+$     ELSE
+$         PROMPT = ESC + "[''ROW';''COL'H''PRM' [''DEF'] ''CEOL'"
+$     ENDIF
+$     IF TYP .EQS. "P" THEN SET TERMINAL /NOECHO
+$     ASK "''PROMPT'" ANS /END_OF_FILE=EXIT
+$     IF TYP .EQS. "P" THEN SET TERMINAL /ECHO
+$     ANS = F$EDIT (ANS,"TRIM")
+$     IF ANS .EQS. "" THEN ANS = DEF
+$     IF TYP .EQS. "F"
+$     THEN
+$         ANS = F$PARSE ("''ANS'","''DEF'",,,"SYNTAX_ONLY")
+$     ENDIF
+$     IF TYP .EQS. "I" .AND. F$TYPE (ANS) .NES. "INTEGER"
+$     THEN 
+$         CALL INVALID_ENTRY
+$         SAY ESC + "[''ROW';01H", CEOS
+$         GOTO PROMPT_LOOP
+$     ENDIF
+$     IF (TYP .EQS. "S" .OR. TYP .EQS. "P") .AND. -
+         ((MIN .NES. "" .AND. F$LENGTH (ANS) .LT. F$INTEGER(MIN)) .OR. -
+          (MAX .NES. "" .AND. F$LENGTH (ANS) .GT. F$INTEGER(MAX)))
+$     THEN 
+$         CALL INVALID_ENTRY
+$         SAY ESC + "[''ROW';01H", CEOS
+$	  IF TYP .EQS. "S" THEN GOTO PROMPT_LOOP
+$         IF TYP .EQS. "P" THEN GOTO CONFIRM_LOOP
+$     ENDIF
+$     ROW = ROW + 1
+$     IF CFM .EQS. "Y"
+$     THEN
+$         IF CONFIRMED .EQ. 0
+$	  THEN
+$	      CONFIRMED = 1
+$	      CONFIRMED_ANS = ANS
+$	      PRM = "Confirm ''PRM'"
+$	      GOTO CONFIRM_LOOP
+$         ELSE
+$	      IF ANS .NES. CONFIRMED_ANS
+$	      THEN 
+$                 CALL INVALID_ENTRY
+$		  ROW = ROW - 2
+$                 SAY ESC + "[''ROW';01H", CEOS
+$                 GOTO PROMPT_LOOP
+$	      ENDIF
+$         ENDIF
+$     ENDIF
+$     IF ANS .NES. DEF THEN SSL_USER_DATA_'CTR' = "''KEY'#''ITM'#''VAL'#''ANS'#''PRM'#''TYP'#''MIN'#''MAX'#Y#''REQ'#''CFM'"
+$     CTR = CTR + 1
+$     GOTO PROMPT_LOOP
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Save the SSL Configuration Data
+$!------------------------------------------------------------------------------
+$!
+$ CTR = 1
+$ SAY ESC + "[''MSG_ROW';01H", BLNK, " Saving Configuration ...", NORM
+$!
+$SAVE_CONF_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN 
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     TYP = F$ELEMENT (5,"#",SSL_USER_DATA_'CTR') ! Value Type
+$     MIN = F$ELEMENT (6,"#",SSL_USER_DATA_'CTR') ! Value Minimum Length
+$     MAX = F$ELEMENT (7,"#",SSL_USER_DATA_'CTR') ! Value Maximum Length
+$     UPD = F$ELEMENT (8,"#",SSL_USER_DATA_'CTR') ! Entry Updated ?
+$     REQ = F$ELEMENT (9,"#",SSL_USER_DATA_'CTR') ! Entry Required for Input ?
+$     CFM = F$ELEMENT (10,"#",SSL_USER_DATA_'CTR')! Confirm Input ?
+$     IF UPD .NES. "Y" .OR. VAL .EQS. "-"
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO SAVE_CONF_LOOP
+$     ENDIF
+$     IF VAL .EQS. "D"
+$     THEN 
+$         SET_CONF_DATA "''KEY'#''ITM'" "''DEF'"
+$     ELSE
+$         SET_CONF_DATA "''KEY'#''ITM'" "''PRM'"
+$         SET_CONF_DATA "''KEY'#''ITM'_default" "''DEF'"
+$     ENDIF
+$     IF MIN .NES. "" THEN SET_CONF_DATA "''KEY'#''ITM'_min" "''MIN'"
+$     IF MAX .NES. "" THEN SET_CONF_DATA "''KEY'#''ITM'_max" "''MAX'"
+$     CTR = CTR + 1
+$     GOTO SAVE_CONF_LOOP
+$ ENDIF
+$!
+$ PURGE /NOLOG /NOCONFIRM 'SSL_CONF_FILE'
+$ RENAME 'SSL_CONF_FILE'; ;1
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$!
+$!------------------------------------------------------------------------------
+$! Create the Server Certificiate
+$!------------------------------------------------------------------------------
+$!
+$ SAY ESC + "[''MSG_ROW';01H", BLNK, " Creating Certificate Request ...", NORM
+$!
+$ X1 = 2
+$ Y1 = TOP_ROW
+$ X2 = TT_COLS - 2
+$ Y2 = MSG_ROW - 1
+$!
+$ GET_USER_DATA "[]#encrypt_key"
+$ _encrypt_key = SSL_USER_DATA
+$ IF F$EDIT (_encrypt_key,"UPCASE") .EQS. "Y"
+$ THEN 
+$     GET_USER_DATA "[]#pem_pass_phrase"
+$     _pem_pass_phrase = SSL_USER_DATA
+$ ENDIF
+$ GET_USER_DATA "[req]#default_bits"
+$ _default_bits = SSL_USER_DATA
+$ GET_USER_DATA "[req]#default_keyfile"
+$ _default_keyfile = SSL_USER_DATA
+$ GET_USER_DATA "[req]#default_csrfile"
+$ _default_csrfile = SSL_USER_DATA
+$ GET_USER_DATA "[]#display_certificate"
+$ _display_certificate = SSL_USER_DATA
+$!
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SHOW SYSTEM /FULL /OUT=SYS$LOGIN:SSL_GENRSA_'PID'.RND
+$!
+$ OPEN /WRITE OFILE SYS$LOGIN:SSL_GENRSA_'PID'.COM
+$ WRITE OFILE "$ DEFINE /USER /NOLOG RANDFILE    SYS$LOGIN:SSL_GENRSA_''PID'.RND"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_GENRSA_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_GENRSA_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$ IF _encrypt_key .EQS. "Y"
+$ THEN 
+$     WRITE OFILE "$ OPENSSL genrsa -des3 -out ''_default_keyfile' ''_default_bits'"
+$     WRITE OFILE "''_pem_pass_phrase'"
+$     WRITE OFILE "''_pem_pass_phrase'"
+$ ELSE
+$     WRITE OFILE "$ OPENSSL genrsa -out ''_default_keyfile' ''_default_bits'"
+$ ENDIF
+$ CLOSE OFILE
+$!
+$ @SYS$LOGIN:SSL_GENRSA_'PID'.COM
+$!
+$ DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_GENRSA_'PID'.RND;*
+$ DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_GENRSA_'PID'.COM;*
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SEARCH SYS$LOGIN:SSL_GENRSA_'PID'.LOG /OUT=SYS$LOGIN:SSL_GENRSA_'PID'.ERR ":error:"
+$ IF F$SEARCH ("SYS$LOGIN:SSL_GENRSA_''PID'.ERR") .NES. "" 
+$ THEN 
+$     IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_GENRSA_''PID'.ERR","ALQ") .NE. 0
+$     THEN 
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_GENRSA_'PID'.ERR;*
+$         SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$         SHOW_FILE "SYS$LOGIN:SSL_GENRSA_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >" 
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_GENRSA_'PID'.LOG;*
+$         GOTO EXIT
+$     ENDIF
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_GENRSA_'PID'.ERR;*
+$ ENDIF
+$! 
+$ DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_GENRSA_'PID'.LOG;*
+$!
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SHOW SYSTEM /FULL /OUT=SYS$LOGIN:SSL_REQ_'PID'.RND
+$!
+$ OPEN /WRITE OFILE SYS$LOGIN:SSL_REQ_'PID'.COM
+$ WRITE OFILE "$ DEFINE /USER /NOLOG RANDFILE    SYS$LOGIN:SSL_REQ_''PID'.RND"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_REQ_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_REQ_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$ IF _encrypt_key .EQS. "Y"
+$ THEN 
+$     WRITE OFILE "$ OPENSSL req -new -config ''SSL_CONF_FILE' -key ''_default_keyfile' -out ''_default_csrfile'"
+$     WRITE OFILE "''_pem_pass_phrase'"
+$     WRITE OFILE "''_pem_pass_phrase'"
+$ ELSE
+$     WRITE OFILE "$ OPENSSL req -new -nodes -config ''SSL_CONF_FILE' -keyout ''_default_keyfile' -out ''_default_csrfile'"
+$ ENDIF
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ CLOSE OFILE
+$!
+$ @SYS$LOGIN:SSL_REQ_'PID'.COM
+$!
+$ DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.COM;*
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SEARCH SYS$LOGIN:SSL_REQ_'PID'.LOG /OUT=SYS$LOGIN:SSL_REQ_'PID'.ERR ":error:"
+$ IF F$SEARCH ("SYS$LOGIN:SSL_REQ_''PID'.ERR") .NES. "" 
+$ THEN 
+$     IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_REQ_''PID'.ERR","ALQ") .NE. 0
+$     THEN 
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.ERR;*
+$         SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$         SHOW_FILE "SYS$LOGIN:SSL_REQ_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >" 
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.LOG;*
+$         GOTO EXIT
+$     ENDIF
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.ERR;*
+$ ENDIF
+$!
+$ DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.LOG;*
+$! 
+$ IF F$EDIT (_display_certificate,"TRIM,UPCASE") .EQS. "Y"
+$ THEN 
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Generating Output ...", NORM, CEOL
+$!
+$     OPEN /WRITE OFILE SYS$LOGIN:SSL_REQ_'PID'.COM
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_REQ_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_REQ_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$     WRITE OFILE "$ OPENSSL req -noout -text -config ''SSL_CONF_FILE' -in ''_default_csrfile'"
+$     CLOSE OFILE
+$!
+$     @SYS$LOGIN:SSL_REQ_'PID'.COM
+$!
+$     DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.COM;*
+$!
+$     DEFINE /USER /NOLOG SYS$ERROR  NL:
+$     DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$     SEARCH SYS$LOGIN:SSL_REQ_'PID'.LOG /OUT=SYS$LOGIN:SSL_REQ_'PID'.ERR ":error:"
+$     IF F$SEARCH ("SYS$LOGIN:SSL_REQ_''PID'.ERR") .NES. "" 
+$     THEN 
+$         IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_REQ_''PID'.ERR","ALQ") .NE. 0
+$         THEN 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.ERR;*
+$             SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$             SHOW_FILE "SYS$LOGIN:SSL_REQ_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >" 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.LOG;*
+$             GOTO EXIT
+$         ENDIF
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.ERR;*
+$     ENDIF
+$!
+$     SAY ESC + "[''MSG_ROW';01H''CEOS'"
+$     SHOW_FILE "SYS$LOGIN:SSL_REQ_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ''_default_csrfile' >" 
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.LOG;*
+$     GOTO EXIT
+$ ENDIF
+$!
+$ TEXT = "Press return to continue"
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$ PROMPT = ESC + "[''MSG_ROW';''COL'H''TEXT'"
+$ ASK "''PROMPT'" OPT
+$!
+$GOTO EXIT
+$!
+$!------------------------------------------------------------------------------
+$! Set the User Data
+$!------------------------------------------------------------------------------
+$!
+$SET_USER_DATA: SUBROUTINE
+$!
+$ IF F$TYPE (SSL_USER_DATA_MAX) .EQS. ""
+$ THEN
+$     SSL_USER_DATA_MAX == 1
+$ ELSE
+$     SSL_USER_DATA_MAX == SSL_USER_DATA_MAX + 1
+$ ENDIF
+$!
+$ SSL_USER_DATA_'SSL_USER_DATA_MAX' == "''P1'"
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Get the User Data
+$!------------------------------------------------------------------------------
+$!
+$GET_USER_DATA: SUBROUTINE
+$!
+$ CTR = 1
+$ USER_KEY = F$ELEMENT (0,"#",P1)
+$ USER_ITM = F$ELEMENT (1,"#",P1)
+$!
+$GET_USER_DATA_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     IF USER_KEY .NES. KEY .OR. USER_ITM .NES. ITM
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO GET_USER_DATA_LOOP
+$     ENDIF
+$     IF VAL .EQS. "-" THEN SSL_USER_DATA == "''DEF'"
+$     IF VAL .EQS. "D" THEN SSL_USER_DATA == "''DEF'"
+$     IF VAL .EQS. "P" THEN SSL_USER_DATA == "''PRM'"
+$ ENDIF
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Delete the User Data
+$!------------------------------------------------------------------------------
+$!
+$DEL_USER_DATA: SUBROUTINE
+$!
+$ IF F$TYPE (SSL_USER_DATA_MAX) .EQS. "" THEN GOTO DEL_USER_DATA_END
+$!
+$DEL_USER_DATA_LOOP:
+$!
+$ IF F$TYPE (SSL_USER_DATA_'SSL_USER_DATA_MAX') .NES. "" 
+$ THEN
+$     DELETE /SYMBOL /GLOBAL SSL_USER_DATA_'SSL_USER_DATA_MAX'
+$     SSL_USER_DATA_MAX == SSL_USER_DATA_MAX - 1
+$     GOTO DEL_USER_DATA_LOOP
+$ ENDIF
+$!
+$ DELETE /SYMBOL /GLOBAL SSL_USER_DATA_MAX
+$!
+$DEL_USER_DATA_END:
+$!
+$ IF F$TYPE (SSL_USER_DATA) .NES. "" THEN DELETE /SYMBOL /GLOBAL SSL_USER_DATA
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Display the invalid entry 
+$!------------------------------------------------------------------------------
+$!
+$INVALID_ENTRY: SUBROUTINE
+$!
+$ SAY ESC + "[''MSG_ROW';01H", BELL, " Invalid Entry, Try again ...''CEOL'"
+$ Wait 00:00:01.5
+$ SAY ESC + "[''MSG_ROW';01H", CEOL
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$!
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ CLOSE OFILE
+$!
+$ DEL_USER_DATA
+$!
+$ IF F$TYPE (SSL_CONF_DATA) .NES. "" THEN DELETE /SYMBOL /GLOBAL SSL_CONF_DATA
+$!
+$ IF F$GETDVI ("TT:","TT_NOECHO") .AND. .NOT. TT_NOECHO THEN SET TERMINAL /ECHO
+$!
+$ IF F$SEARCH ("SYS$LOGIN:SSL_GENRSA_''PID'.%%%;*") .NES. "" THEN DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_GENRSA_'PID'.%%%;*
+$ IF F$SEARCH ("SYS$LOGIN:SSL_REQ_''PID'.%%%;*") .NES. "" THEN DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.%%%;*
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$self_cert.com

@@ -0,0 +1,725 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$SELF_CERT.COM - SSL Self Signed Certificate procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure prompts the user through creating a Server Certificate.
+$!
+$! There are no parameters used.
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ DELETE := DELETE
+$ SAY := WRITE SYS$OUTPUT
+$ ASK := READ SYS$COMMAND /END_OF_FILE=EXIT /PROMPT=
+$ PID = F$GETJPI ("","PID")
+$ TT_NOECHO = F$GETDVI ("TT:","TT_NOECHO")
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ TT_ROWS = F$GETDVI ("TT:","TT_PAGE")
+$ TT_COLS = F$GETDVI ("TT:","DEVBUFSIZ")
+$!
+$ GET_USER_DATA := CALL GET_USER_DATA
+$ SET_USER_DATA := CALL SET_USER_DATA
+$ DEL_USER_DATA := CALL DEL_USER_DATA
+$ INIT_TERM := @SSL$COM:SSL$INIT_TERM
+$ SHOW_FILE := @SSL$COM:SSL$SHOW_FILE 
+$ SSL_CONF_FILE = F$TRNLNM ("SSL$CONF")
+$ GET_CONF_DATA := @SSL$COM:SSL$CONF_UTIL 'SSL_CONF_FILE' GET
+$ SET_CONF_DATA := @SSL$COM:SSL$CONF_UTIL 'SSL_CONF_FILE' SET
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$ BELL[0,8] = 7 	! Ring the terminal Bell
+$ RED = 1		! Color - Red
+$ FGD = 30		! Foreground
+$ BGD = 0		! Background
+$ CSCR = ESC + "[2J"	! Clear the Screen 
+$ CEOS = ESC + "[0J"	! Clear to the End of the Screen 
+$ CEOL = ESC + "[0K"	! Clear to the End of the Line
+$ NORM = ESC + "[0m"	! Turn Attributes off
+$ BLNK = ESC + "[5m"    ! Turn on BLINK Attribute
+$ WIDE = ESC + "#6"     ! Turn on WIDE Attribute
+$!
+$!------------------------------------------------------------------------------
+$! Run the SSL setup if it hasn't been run yet
+$!------------------------------------------------------------------------------
+$!
+$ IF F$TRNLNM ("SSL$ROOT") .EQS. ""
+$ THEN
+$     IF F$SEARCH ("SSL$COM:SSL$INIT_ENV.COM") .NES. ""
+$     THEN 
+$         @SSL$COM:SSL$INIT_ENV.COM
+$     ELSE
+$         SAY BELL, "Unable to locate SSL$COM:SSL$INIT_ENV.COM ..."
+$	  GOTO EXIT
+$     ENDIF
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Display the Page Header
+$!------------------------------------------------------------------------------
+$!
+$ INIT_TERM
+$ BCOLOR = BGD
+$ FCOLOR = FGD + RED
+$ COLOR = ESC + "[''BCOLOR';''FCOLOR'm"
+$!
+$ TEXT = "SSL Certificate Tool"
+$ COL = (TT_COLS - (F$LENGTH (TEXT) * 2)) / 4
+$!
+$ SAY ESC + "[01;01H", CSCR
+$ SAY ESC + "[02;''COL'H", COLOR, WIDE, TEXT, NORM
+$!
+$ TEXT = "Create Self-Signed Certificate"
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[04;01H"
+$ SAY ESC + "[04;''COL'H", COLOR, TEXT, NORM
+$!
+$ ROW = 6
+$ COL = 2
+$ TOP_ROW = ROW
+$ MSG_ROW = TT_ROWS - 1
+$!
+$!------------------------------------------------------------------------------
+$! Initialize the Request Data
+$!------------------------------------------------------------------------------
+$!
+$ IF F$SEARCH ("''SSL_CONF_FILE'") .NES. ""
+$ THEN 
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Reading Configuration ...", NORM
+$ ELSE
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Initializing Configuration ...", NORM
+$ ENDIF
+$!
+$ _request_name = "req"
+$!
+$ _distinguished_name = "REQ_distinguished_name"
+$ _distinguished_name_upd = "Y"
+$!
+$ _default_bits = "1024"
+$ _default_bits_upd = "Y"
+$!
+$ _default_keyfile = "SSL$KEY:SERVER.KEY"
+$ _default_keyfile_upd = "Y"
+$!
+$ _default_crtfile = "SSL$CRT:SERVER.CRT"
+$ _default_crtfile_upd = "Y"
+$!
+$ _countryName_prompt = "Country Name ?"
+$ _countryName_min = "2"
+$ _countryName_max = "2"
+$ _countryName_default = "US"
+$ _countryName_upd = "Y"
+$ _countryName_cnt = 4
+$!
+$ _stateOrProvinceName_prompt = "State or Province Name ?"
+$ _stateOrProvinceName_default = ""
+$ _stateOrProvinceName_upd = "Y"
+$ _stateOrProvinceName_cnt = 2
+$!
+$ _localityName_prompt = "City Name ?"
+$ _localityName_default = ""
+$ _localityName_upd = "Y"
+$ _localityName_cnt = 2
+$!
+$ _0organizationName_prompt = "Organization Name ?"
+$ _0organizationName_default = ""
+$ _0organizationName_upd = "Y"
+$ _0organizationName_cnt = 2
+$!
+$ _organizationalUnitName_prompt = "Organization Unit Name ?"
+$ _organizationalUnitName_default = ""
+$ _organizationalUnitName_upd = "Y"
+$ _organizationalUnitName_cnt = 2
+$!
+$ _commonName_prompt = "Common Name ?"
+$ _commonName_max = "64"
+$ HOSTNAME -s _commonName_default
+$ _commonName_upd = "Y"
+$ _commonName_cnt = 3
+$!
+$ _emailAddress_prompt = "Email Address ?"
+$ _emailAddress_max = "40"
+$ _emailAddress_default = "webmaster@''_commonName_default'"
+$ _emailAddress_upd = "Y"
+$ _emailAddress_cnt = 3
+$!
+$ IF F$SEARCH ("''SSL_CONF_FILE'") .NES. ""
+$ THEN 
+$     GET_CONF_DATA "[''_request_name']#distinguished_name"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _distinguished_name = SSL_CONF_DATA
+$         _distinguished_name_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_request_name']#default_bits"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _default_bits = SSL_CONF_DATA
+$     	  _default_bits_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_request_name']#default_keyfile"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _default_keyfile = F$PARSE (SSL_CONF_DATA,"SSL$ROOT:",,"DEVICE") + -
+ 		             F$PARSE (SSL_CONF_DATA,"[KEY]",,"DIRECTORY") + -
+ 		             F$PARSE (SSL_CONF_DATA,"SERVER",,"NAME") + -
+ 		             F$PARSE (SSL_CONF_DATA,".KEY",,"TYPE") 
+$         _default_keyfile_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_request_name']#default_crtfile"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _default_crtfile = F$PARSE (SSL_CONF_DATA,"SSL$ROOT:",,"DEVICE") + -
+ 		             F$PARSE (SSL_CONF_DATA,"[CRT]",,"DIRECTORY") + -
+ 		             F$PARSE (SSL_CONF_DATA,"SERVER",,"NAME") + -
+ 		             F$PARSE (SSL_CONF_DATA,".CRT",,"TYPE") 
+$         _default_crtfile_upd = "N"
+$     ENDIF
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#countryName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _countryName_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#countryName_min"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _countryName_min = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#countryName_max"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _countryName_max = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#countryName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _countryName_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _countryName_cnt .EQS. CTR THEN _countryName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#stateOrProvinceName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _stateOrProvinceName_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#stateOrProvinceName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _stateOrProvinceName_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _stateOrProvinceName_cnt .EQ. CTR THEN _stateOrProvinceName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#localityName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _localityName_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#localityName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _localityName_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _localityName_cnt .EQ. CTR THEN _localityName_default_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#0.organizationName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _0organizationName_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#0.organizationName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _0organizationName_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _0organizationName_cnt .EQ. CTR THEN _0organizationName_default_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#organizationalUnitName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _organizationalUnitName_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#organizationalUnitName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _organizationalUnitName_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _organizationalUnitName_cnt .EQ. CTR THEN _organizationalUnitName_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#commonName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _commonName_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#commonName_max"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _commonName_max = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#commonName_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _commonName_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _commonName_cnt .EQ. CTR THEN _commonName_default_upd = "N"
+$!
+$     CTR = 0
+$     GET_CONF_DATA "[''_distinguished_name']#emailAddress"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _emailAddress_prompt = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#emailAddress_max"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _emailAddress_max = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     GET_CONF_DATA "[''_distinguished_name']#emailAddress_default"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _emailAddress_default = SSL_CONF_DATA
+$	  CTR = CTR + 1
+$     ENDIF
+$     IF _emailAddress_cnt .EQ. CTR THEN _emailAddress_default_upd = "N"
+$ ENDIF
+$!
+$ SET_USER_DATA "[]#encrypt_key#-#N#Encrypt Private Key ?#S##1##Y#N"
+$ SET_USER_DATA "[]#pem_pass_phrase#-##PEM Pass Phrase ?#P#1###Y#Y"
+$ SET_USER_DATA "[''_request_name']#default_bits#D#''_default_bits'#Encryption Bits ?#I###''_default_bits_upd'#Y#N"
+$ SET_USER_DATA "[''_request_name']#default_keyfile#D#''_default_keyfile'#Certificate Key File ?#F###''_default_keyfile_upd'#Y#N"
+$ SET_USER_DATA "[''_request_name']#default_crtfile#D#''_default_crtfile'#Certificate File ?#F###''_default_crtfile_upd'#Y#N"
+$ SET_USER_DATA "[''_request_name']#distinguished_name#D#''_distinguished_name'##S###''_distinguished_name_upd'#N#N"
+$ SET_USER_DATA "[''_distinguished_name']#countryName#P#''_countryName_default'#''_countryName_prompt'#S#''_countryName_min'#''#''_countryName_upd'#Y#N" 
+$ SET_USER_DATA "[''_distinguished_name']#stateOrProvinceName#P#''_stateOrProvinceName_default'#''_stateOrProvinceName_prompt'####''_stateOrProvinceName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#localityName#P#''_localityName_default'#''_localityName_prompt'#S###''_localityName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#0.organizationName#P#''_0organizationName_default'#''_0organizationName_prompt'#S###''_0organizationalName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#organizationalUnitName#P#''_organizationalUnitName_default'#''_organizationalUnitName_prompt#S###''_organizationalUnitName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#commonName#P#''_commonName_default'#''_commonName_prompt'#S##''_commonName_max'#''_commonName_upd'#Y#N"
+$ SET_USER_DATA "[''_distinguished_name']#emailAddress#P#''_emailAddress_default'#''_emailAddress_prompt'#S##''_emailAddress_max'#''_emailAddress_upd'#Y#N"
+$ SET_USER_DATA "[]#display_certificate#-#N#Display the Certificate ?#S##1##Y#N"
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$!
+$!------------------------------------------------------------------------------
+$! Confirm/Update the SSL Configuration Data
+$!------------------------------------------------------------------------------
+$!
+$ CTR = 1
+$!
+$PROMPT_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN 
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     TYP = F$ELEMENT (5,"#",SSL_USER_DATA_'CTR') ! Value Type
+$     MIN = F$ELEMENT (6,"#",SSL_USER_DATA_'CTR') ! Value Minimum Length
+$     MAX = F$ELEMENT (7,"#",SSL_USER_DATA_'CTR') ! Value Maximum Length
+$     UPD = F$ELEMENT (8,"#",SSL_USER_DATA_'CTR') ! Entry Updated ?
+$     REQ = F$ELEMENT (9,"#",SSL_USER_DATA_'CTR') ! Entry Required for Input ?
+$     CFM = F$ELEMENT (10,"#",SSL_USER_DATA_'CTR')! Confirm Input  ?
+$!
+$! The PEM Pass Phrase prompt is dependant on the answer to encrypt the private key
+$!
+$     IF KEY .EQS. "[]" .AND. ITM .EQS. "pem_pass_phrase"
+$     THEN
+$         GET_USER_DATA "[]#encrypt_key"
+$ 	  _encrypt_key = SSL_USER_DATA
+$         IF F$EDIT (_encrypt_key,"UPCASE") .NES. "Y"
+$	  THEN
+$             CTR = CTR + 1
+$             GOTO PROMPT_LOOP
+$	  ENDIF
+$     ENDIF
+$!
+$     CONFIRMED = 0
+$     IF REQ .EQS. "N"
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO PROMPT_LOOP
+$     ENDIF
+$     IF ROW .GT. MSG_ROW - 2
+$     THEN 
+$         SAY ESC + "[''TOP_ROW';01H", CEOS
+$	  ROW = TOP_ROW
+$     ENDIF
+$!
+$CONFIRM_LOOP:
+$!
+$     IF PRM .EQS. "" 
+$     THEN 
+$         PROMPT = ESC + "[''ROW';''COL'H''ITM' ? [''DEF'] ''CEOL'"
+$     ELSE
+$         PROMPT = ESC + "[''ROW';''COL'H''PRM' [''DEF'] ''CEOL'"
+$     ENDIF
+$     IF TYP .EQS. "P" THEN SET TERMINAL /NOECHO
+$     ASK "''PROMPT'" ANS /END_OF_FILE=EXIT
+$     IF TYP .EQS. "P" THEN SET TERMINAL /ECHO
+$     ANS = F$EDIT (ANS,"TRIM")
+$     IF ANS .EQS. "" THEN ANS = DEF
+$     IF TYP .EQS. "F"
+$     THEN
+$         ANS = F$PARSE ("''ANS'","''DEF'",,,"SYNTAX_ONLY")
+$     ENDIF
+$     IF TYP .EQS. "I" .AND. F$TYPE (ANS) .NES. "INTEGER"
+$     THEN 
+$         CALL INVALID_ENTRY
+$         SAY ESC + "[''ROW';01H", CEOS
+$         GOTO PROMPT_LOOP
+$     ENDIF
+$     IF (TYP .EQS. "S" .OR. TYP .EQS. "P") .AND. -
+         ((MIN .NES. "" .AND. F$LENGTH (ANS) .LT. F$INTEGER(MIN)) .OR. -
+          (MAX .NES. "" .AND. F$LENGTH (ANS) .GT. F$INTEGER(MAX)))
+$     THEN 
+$         CALL INVALID_ENTRY
+$         SAY ESC + "[''ROW';01H", CEOS
+$	  IF TYP .EQS. "S" THEN GOTO PROMPT_LOOP
+$         IF TYP .EQS. "P" THEN GOTO CONFIRM_LOOP
+$     ENDIF
+$     ROW = ROW + 1
+$     IF CFM .EQS. "Y"
+$     THEN
+$         IF CONFIRMED .EQ. 0
+$	  THEN
+$	      CONFIRMED = 1
+$	      CONFIRMED_ANS = ANS
+$	      PRM = "Confirm ''PRM'"
+$	      GOTO CONFIRM_LOOP
+$         ELSE
+$	      IF ANS .NES. CONFIRMED_ANS
+$	      THEN 
+$                 CALL INVALID_ENTRY
+$		  ROW = ROW - 2
+$                 SAY ESC + "[''ROW';01H", CEOS
+$                 GOTO PROMPT_LOOP
+$	      ENDIF
+$         ENDIF
+$     ENDIF
+$     IF ANS .NES. DEF THEN SSL_USER_DATA_'CTR' = "''KEY'#''ITM'#''VAL'#''ANS'#''PRM'#''TYP'#''MIN'#''MAX'#Y#''REQ'#''CFM'"
+$     CTR = CTR + 1
+$     GOTO PROMPT_LOOP
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Save the SSL Configuration Data
+$!------------------------------------------------------------------------------
+$!
+$ CTR = 1
+$ SAY ESC + "[''MSG_ROW';01H", BLNK, " Saving Configuration ...", NORM
+$!
+$SAVE_CONF_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN 
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     TYP = F$ELEMENT (5,"#",SSL_USER_DATA_'CTR') ! Value Type
+$     MIN = F$ELEMENT (6,"#",SSL_USER_DATA_'CTR') ! Value Minimum Length
+$     MAX = F$ELEMENT (7,"#",SSL_USER_DATA_'CTR') ! Value Maximum Length
+$     UPD = F$ELEMENT (8,"#",SSL_USER_DATA_'CTR') ! Entry Updated ?
+$     REQ = F$ELEMENT (9,"#",SSL_USER_DATA_'CTR') ! Entry Required for Input ?
+$     CFM = F$ELEMENT (10,"#",SSL_USER_DATA_'CTR')! Confirm Input ?
+$     IF UPD .NES. "Y" .OR. VAL .EQS. "-"
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO SAVE_CONF_LOOP
+$     ENDIF
+$     IF VAL .EQS. "D"
+$     THEN 
+$         SET_CONF_DATA "''KEY'#''ITM'" "''DEF'"
+$     ELSE
+$         SET_CONF_DATA "''KEY'#''ITM'" "''PRM'"
+$         SET_CONF_DATA "''KEY'#''ITM'_default" "''DEF'"
+$     ENDIF
+$     IF MIN .NES. "" THEN SET_CONF_DATA "''KEY'#''ITM'_min" "''MIN'"
+$     IF MAX .NES. "" THEN SET_CONF_DATA "''KEY'#''ITM'_max" "''MAX'"
+$     CTR = CTR + 1
+$     GOTO SAVE_CONF_LOOP
+$ ENDIF
+$!
+$ PURGE /NOLOG /NOCONFIRM 'SSL_CONF_FILE'
+$ RENAME 'SSL_CONF_FILE'; ;1
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$!
+$!------------------------------------------------------------------------------
+$! Create the Server Certificiate
+$!------------------------------------------------------------------------------
+$!
+$ SAY ESC + "[''MSG_ROW';01H", BLNK, " Creating Self-Signed Certificate ...", NORM
+$!
+$ X1 = 2
+$ Y1 = TOP_ROW
+$ X2 = TT_COLS - 2
+$ Y2 = MSG_ROW - 1
+$!
+$ GET_USER_DATA "[]#encrypt_key"
+$ _encrypt_key = SSL_USER_DATA
+$ IF F$EDIT (_encrypt_key,"UPCASE") .EQS. "Y"
+$ THEN 
+$     GET_USER_DATA "[]#pem_pass_phrase"
+$     _pem_pass_phrase = SSL_USER_DATA
+$ ENDIF
+$ GET_USER_DATA "[''_request_name']#default_bits"
+$ _default_bits = SSL_USER_DATA
+$ GET_USER_DATA "[''_request_name']#default_keyfile"
+$ _default_keyfile = SSL_USER_DATA
+$ GET_USER_DATA "[''_request_name']#default_crtfile"
+$ _default_crtfile = SSL_USER_DATA
+$ GET_USER_DATA "[]#display_certificate"
+$ _display_certificate = SSL_USER_DATA
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SHOW SYSTEM /FULL /OUT=SYS$LOGIN:SSL_REQ_'PID'.RND
+$!
+$ OPEN /WRITE OFILE SYS$LOGIN:SSL_REQ_'PID'.COM
+$ WRITE OFILE "$ DEFINE /USER /NOLOG RANDFILE    SYS$LOGIN:SSL_REQ_''PID'.RND"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_REQ_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_REQ_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$ IF F$EDIT (_encrypt_key,"UPCASE") .EQS. "Y"
+$ THEN 
+$     WRITE OFILE "$ OPENSSL req -config ''SSL_CONF_FILE' -new -days 365 -x509 -keyout ''_default_keyfile' -out ''_default_crtfile'"
+$     WRITE OFILE "''_pem_pass_phrase'"
+$     WRITE OFILE "''_pem_pass_phrase'"
+$ ELSE
+$     WRITE OFILE "$ OPENSSL req -config ''SSL_CONF_FILE' -nodes -new -days 365 -x509 -keyout ''_default_keyfile' -out ''_default_crtfile'"
+$ ENDIF
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ WRITE OFILE ""
+$ CLOSE OFILE
+$!
+$ @SYS$LOGIN:SSL_REQ_'PID'.COM
+$!
+$ DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.COM;*
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SEARCH SYS$LOGIN:SSL_REQ_'PID'.LOG /OUT=SYS$LOGIN:SSL_REQ_'PID'.ERR ":error:"
+$ IF F$SEARCH ("SYS$LOGIN:SSL_REQ_''PID'.ERR") .NES. "" 
+$ THEN 
+$     IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_REQ_''PID'.ERR","ALQ") .NE. 0
+$     THEN 
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.ERR;*
+$         SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$         SHOW_FILE "SYS$LOGIN:SSL_REQ_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >"
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.LOG;*
+$         GOTO EXIT
+$     ENDIF
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.ERR;*
+$ ENDIF
+$!
+$ DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.LOG;*
+$! 
+$ IF F$EDIT (_display_certificate,"TRIM,UPCASE") .EQS. "Y"
+$ THEN 
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Generating Output ...", NORM, CEOL
+$!
+$     OPEN /WRITE OFILE SYS$LOGIN:SSL_X509_'PID'.COM
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_X509_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_X509_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$     WRITE OFILE "$ OPENSSL x509 -noout -text -in ''_default_crtfile'"
+$     CLOSE OFILE
+$!
+$     @SYS$LOGIN:SSL_X509_'PID'.COM
+$!
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.COM;*
+$!
+$     DEFINE /USER /NOLOG SYS$ERROR  NL:
+$     DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$     SEARCH SYS$LOGIN:SSL_X509_'PID'.LOG /OUT=SYS$LOGIN:SSL_X509_'PID'.ERR ":error:"
+$     IF F$SEARCH ("SYS$LOGIN:SSL_X509_''PID'.ERR") .NES. "" 
+$     THEN 
+$         IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_X509_''PID'.ERR","ALQ") .NE. 0
+$         THEN 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.ERR;*
+$             SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$             SHOW_FILE "SYS$LOGIN:SSL_X509_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >" 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.LOG;*
+$             GOTO EXIT
+$         ENDIF
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.ERR;*
+$     ENDIF
+$!
+$     SAY ESC + "[''MSG_ROW';01H''CEOS'"
+$     SHOW_FILE "SYS$LOGIN:SSL_X509_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ''_default_crtfile' >" 
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.LOG;*
+$     GOTO EXIT
+$ ENDIF
+$!
+$ TEXT = "Press return to continue"
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$ PROMPT = ESC + "[''MSG_ROW';''COL'H''TEXT'"
+$ ASK "''PROMPT'" OPT
+$!
+$GOTO EXIT
+z$!
+$!------------------------------------------------------------------------------
+$! Set the User Data
+$!------------------------------------------------------------------------------
+$!
+$SET_USER_DATA: SUBROUTINE
+$!
+$ IF F$TYPE (SSL_USER_DATA_MAX) .EQS. ""
+$ THEN
+$     SSL_USER_DATA_MAX == 1
+$ ELSE
+$     SSL_USER_DATA_MAX == SSL_USER_DATA_MAX + 1
+$ ENDIF
+$!
+$ SSL_USER_DATA_'SSL_USER_DATA_MAX' == "''P1'"
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Find the Request Data
+$!------------------------------------------------------------------------------
+$!
+$GET_USER_DATA: SUBROUTINE
+$!
+$ CTR = 1
+$ USER_KEY = F$ELEMENT (0,"#",P1)
+$ USER_ITM = F$ELEMENT (1,"#",P1)
+$!
+$GET_USER_DATA_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     IF USER_KEY .NES. KEY .OR. USER_ITM .NES. ITM
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO GET_USER_DATA_LOOP
+$     ENDIF
+$     IF VAL .EQS. "-" THEN SSL_USER_DATA == "''DEF'"
+$     IF VAL .EQS. "D" THEN SSL_USER_DATA == "''DEF'"
+$     IF VAL .EQS. "P" THEN SSL_USER_DATA == "''PRM'"
+$ ENDIF
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Delete the User Data
+$!------------------------------------------------------------------------------
+$!
+$DEL_USER_DATA: SUBROUTINE
+$!
+$ IF F$TYPE (SSL_USER_DATA_MAX) .EQS. "" THEN GOTO DEL_USER_DATA_END
+$!
+$DEL_USER_DATA_LOOP:
+$!
+$ IF F$TYPE (SSL_USER_DATA_'SSL_USER_DATA_MAX') .NES. "" 
+$ THEN
+$     DELETE /SYMBOL /GLOBAL SSL_USER_DATA_'SSL_USER_DATA_MAX'
+$     SSL_USER_DATA_MAX == SSL_USER_DATA_MAX - 1
+$     GOTO DEL_USER_DATA_LOOP
+$ ENDIF
+$!
+$ DELETE /SYMBOL /GLOBAL SSL_USER_DATA_MAX
+$!
+$DEL_USER_DATA_END:
+$!
+$ IF F$TYPE (SSL_USER_DATA) .NES. "" THEN DELETE /SYMBOL /GLOBAL SSL_USER_DATA
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Display the invalid entry 
+$!------------------------------------------------------------------------------
+$!
+$INVALID_ENTRY: SUBROUTINE
+$!
+$ SAY ESC + "[''MSG_ROW';01H", BELL, " Invalid Entry, Try again ...''CEOL'"
+$ Wait 00:00:01.5
+$ SAY ESC + "[''MSG_ROW';01H", CEOL
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$!
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ CLOSE OFILE
+$!
+$ DEL_USER_DATA
+$!
+$ IF F$TYPE (SSL_CONF_DATA) .NES. "" THEN DELETE /SYMBOL /GLOBAL SSL_CONF_DATA
+$!
+$ IF F$GETDVI ("TT:","TT_NOECHO") .AND. .NOT. TT_NOECHO THEN SET TERMINAL /ECHO
+$!
+$ IF F$SEARCH ("SYS$LOGIN:SSL_REQ_''PID'.%%%;*") .NES. "" THEN DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.%%%;*
+$ IF F$SEARCH ("SYS$LOGIN:SSL_X509_''PID'.%%%;*") .NES. "" THEN DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.%%%;*
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$show_file.com

@@ -0,0 +1,205 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$SHOW_FILE.COM - SSL Show File procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure display the contents of a given file in a box size specified.
+$!
+$! The parameters used are:
+$!
+$! 	P1	- File to View
+$! 	P2	- X1 coordinate
+$! 	P3	- Y1 coordinate
+$! 	P4	- X2 coordinate
+$! 	P5	- Y3 coordinate
+$! 	P6	- File Box Title (Optional)
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ SAY := WRITE SYS$OUTPUT
+$ ASK := READ SYS$COMMAND /END_OF_FILE=EXIT /PROMPT=
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ DRAW_BOX := @SSL$COM:SSL$DRAW_BOX
+$ FILL_BOX := @SSL$COM:SSL$FILL_BOX
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$ CEOL = ESC + "[0K"	! Clear to the End of the Line
+$ NORM = ESC + "[0m"	! Turn Attributes off
+$ BOLD = ESC + "[1m"    ! Turn on BOLD Attribute
+$!
+$!------------------------------------------------------------------------------
+$! Display the Page Header
+$!------------------------------------------------------------------------------
+$!
+$ REC_MAX = 0
+$ OPEN /READ IFILE 'P1' 
+$!
+$READ_LOOP:
+$!
+$ READ /END_OF_FILE=READ_END IFILE IREC
+$ REC_MAX = REC_MAX + 1
+$ REC_'REC_MAX' = IREC
+$ GOTO READ_LOOP
+$!
+$READ_END:
+$!
+$ CLOSE IFILE
+$!
+$ IF REC_MAX .EQ. 0
+$ THEN 
+$     DRAW_BOX 'P2' 'P3' 'P4' 'P5' "''P6'" " ** End-of-File **, Press Return to Exit "
+$     INPUT_ROW = P5 + 1
+$     PROMPT = ESC + "[''INPUT_ROW';01H ''CEOL'"
+$     ASK "''PROMPT'" OPT
+$     GOTO EXIT
+$ ENDIF
+$!
+$ COL = P2 + 2
+$ ROW = P3 + 2
+$ TOP_ROW = ROW
+$ INPUT_ROW = P5 + 1
+$ BOX_WIDTH = P4 - (P2 + 2)
+$ BOX_HEIGHT = P5 - (P3 + 3)
+$!
+$ REC_CTR = 1
+$ PAGE_CTR = 1
+$ PAGE_'PAGE_CTR'_REC_CTR = REC_CTR
+$ RECS_PER_PAGE = BOX_HEIGHT
+$ PAGE_MAX = REC_MAX / RECS_PER_PAGE
+$ IF PAGE_MAX * RECS_PER_PAGE .LT. REC_MAX THEN PAGE_MAX = PAGE_MAX + 1
+$!
+$ DRAW_BOX 'P2' 'P3' 'P4' 'P5' "''P6'" " Enter B for Back, N for Next, Ctrl-Z to Exit "
+$ PAGE_TXT = F$FAO (" Page !UL of !UL ", PAGE_CTR, PAGE_MAX)
+$ _COL = P2 + (BOX_WIDTH - F$LENGTH (PAGE_TXT)) + 2
+$ SAY ESC + "[''P3';''_COL'H''BOLD'''PAGE_TXT'''NORM'"
+$!
+$DISPLAY_LOOP:
+$!
+$ IF REC_CTR .LE. REC_MAX .AND. F$TYPE (REC_'REC_CTR') .NES. ""
+$ THEN 
+$     REC = REC_'REC_CTR'
+$ ENDIF
+$ WRAP_IN_PROGRESS = 0
+$!
+$WRAP_LOOP:
+$!
+$ IF ROW .LE. (P5 - 2) .AND. -
+     REC_CTR .LE. PAGE_CTR * RECS_PER_PAGE
+$ THEN
+$     IF F$LENGTH (REC) .GT. BOX_WIDTH  
+$     THEN 
+$ 	  IF WRAP_IN_PROGRESS .EQ. 0
+$	  THEN
+$	      WRAP_IN_PROGRESS = 1
+$	      _COL = COL
+$	  ELSE
+$	      _COL = COL - 1
+$	  ENDIF
+$	  REC_SEG = F$EXTRACT (0, BOX_WIDTH, REC)
+$         SAY ESC + "[''ROW';''_COL'H", REC_SEG
+$         REC = ">" + F$EXTRACT (BOX_WIDTH, F$LENGTH (REC)-BOX_WIDTH, REC)
+$         ROW = ROW + 1
+$	  GOTO WRAP_LOOP
+$     ELSE
+$         IF REC_CTR .LE. REC_MAX .AND. F$TYPE (REC_'REC_CTR') .NES. ""
+$         THEN 
+$ 	      IF WRAP_IN_PROGRESS .EQ. 1
+$	      THEN
+$		  _COL = COL - 1
+$	      ELSE
+$		  _COL = COL
+$	      ENDIF
+$             SAY ESC + "[''ROW';''_COL'H", REC
+$	  ENDIF
+$     ENDIF
+$ ELSE
+$!
+$RETRY:
+$!
+$     PROMPT = ESC + "[''INPUT_ROW';01H ''CEOL'"
+$     ASK "''PROMPT'" OPT
+$     IF F$EDIT (OPT,"TRIM,UPCASE") .NES. "B" .AND. -
+	 F$EDIT (OPT,"TRIM,UPCASE") .NES. "N" 
+$     THEN
+$         CALL INVALID_ENTRY
+$	  GOTO RETRY
+$     ENDIF
+$     IF F$EDIT (OPT,"TRIM,UPCASE") .EQS. "B"
+$     THEN
+$	  IF PAGE_CTR .GT. 1
+$	  THEN
+$ 	      ROW = TOP_ROW
+$	      PAGE_CTR = PAGE_CTR - 1
+$ 	      REC_CTR = PAGE_'PAGE_CTR'_REC_CTR
+$             PAGE_TXT = F$FAO (" Page !UL of !UL ", PAGE_CTR, PAGE_MAX)
+$             _COL = P2 + (BOX_WIDTH - F$LENGTH (PAGE_TXT)) + 2
+$             SAY ESC + "[''P3';''_COL'H''BOLD'''PAGE_TXT'''NORM'"
+$             FILL_BOX 'P2' 'P3' 'P4' 'P5'
+$	      GOTO DISPLAY_LOOP
+$	  ELSE
+$             CALL INVALID_ENTRY
+$	      GOTO RETRY
+$         ENDIF
+$     ENDIF
+$     IF F$EDIT (OPT,"TRIM,UPCASE") .EQS. "N"
+$     THEN
+$	  IF PAGE_CTR .LT. PAGE_MAX
+$	  THEN
+$	      PAGE_CTR = PAGE_CTR + 1
+$ 	      PAGE_'PAGE_CTR'_REC_CTR = REC_CTR
+$             PAGE_TXT = F$FAO (" Page !UL of !UL ", PAGE_CTR, PAGE_MAX)
+$             _COL = P2 + (BOX_WIDTH - F$LENGTH (PAGE_TXT)) + 2
+$             SAY ESC + "[''P3';''_COL'H''BOLD'''PAGE_TXT'''NORM'"
+$             FILL_BOX 'P2' 'P3' 'P4' 'P5'
+$	  ELSE
+$             CALL INVALID_ENTRY
+$	      GOTO RETRY
+$         ENDIF
+$     ENDIF
+$     FILL_BOX 'P2' 'P3' 'P4' 'P5'
+$     ROW = TOP_ROW
+$     GOTO WRAP_LOOP
+$ ENDIF
+$ REC_CTR = REC_CTR + 1
+$ ROW = ROW + 1
+$ GOTO DISPLAY_LOOP
+$!
+$!------------------------------------------------------------------------------
+$! Display the invalid entry 
+$!------------------------------------------------------------------------------
+$!
+$INVALID_ENTRY: SUBROUTINE
+$!
+$ SAY ESC + "[''INPUT_ROW';01H", BELL, " Invalid Entry, Try again ...''CEOL'"
+$ Wait 00:00:01.5
+$ SAY ESC + "[''INPUT_ROW';01H", CEOL
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Exit 
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ CLOSE IFILE
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$sign_cert.com

@@ -0,0 +1,759 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$SIGN_CERT.COM - SSL Sign Certificate Request procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure prompts the user through creating a Server Certificate.
+$!
+$! There are no parameters used.
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ DELETE := DELETE
+$ SAY := WRITE SYS$OUTPUT
+$ ASK := READ SYS$COMMAND /END_OF_FILE=EXIT /PROMPT=
+$ PID = F$GETJPI ("","PID")
+$ TT_NOECHO = F$GETDVI ("TT:","TT_NOECHO")
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ TT_ROWS = F$GETDVI ("TT:","TT_PAGE")
+$ TT_COLS = F$GETDVI ("TT:","DEVBUFSIZ")
+$!
+$ GET_USER_DATA := CALL GET_USER_DATA
+$ SET_USER_DATA := CALL SET_USER_DATA
+$ DEL_USER_DATA := CALL DEL_USER_DATA
+$ INIT_TERM := @SSL$COM:SSL$INIT_TERM
+$ SHOW_FILE := @SSL$COM:SSL$SHOW_FILE 
+$ SSL_CONF_FILE = F$TRNLMN ("SSL$CA_CONF")
+$ GET_CONF_DATA := @SSL$COM:SSL$CONF_UTIL 'SSL_CONF_FILE' GET
+$ SET_CONF_DATA := @SSL$COM:SSL$CONF_UTIL 'SSL_CONF_FILE' SET
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$ BELL[0,8] = 7 	! Ring the terminal Bell
+$ RED = 1		! Color - Red
+$ FGD = 30		! Foreground
+$ BGD = 0		! Background
+$ CSCR = ESC + "[2J"	! Clear the Screen 
+$ CEOS = ESC + "[0J"	! Clear to the End of the Screen 
+$ CEOL = ESC + "[0K"	! Clear to the End of the Line
+$ NORM = ESC + "[0m"	! Turn Attributes off
+$ BLNK = ESC + "[5m"    ! Turn on BLINK Attribute
+$ WIDE = ESC + "#6"     ! Turn on WIDE Attribute
+$!
+$!------------------------------------------------------------------------------
+$! Run the SSL setup if it hasn't been run yet
+$!------------------------------------------------------------------------------
+$!
+$ IF F$TRNLNM ("SSL$ROOT") .EQS. ""
+$ THEN
+$     IF F$SEARCH ("SSL$COM:SSL$INIT_ENV.COM") .NES. ""
+$     THEN 
+$         @SSL$COM:SSL$INIT_ENV.COM
+$     ELSE
+$         SAY BELL, "Unable to locate SSL$COM:SSL$INIT_ENV.COM ..."
+$	  GOTO EXIT
+$     ENDIF
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Display the Page Header
+$!------------------------------------------------------------------------------
+$!
+$ INIT_TERM
+$ BCOLOR = BGD
+$ FCOLOR = FGD + RED
+$ COLOR = ESC + "[''BCOLOR';''FCOLOR'm"
+$!
+$ TEXT = "SSL Certificate Tool"
+$ COL = (TT_COLS - (F$LENGTH (TEXT) * 2)) / 4
+$!
+$ SAY ESC + "[01;01H", CSCR
+$ SAY ESC + "[02;''COL'H", COLOR, WIDE, TEXT, NORM
+$!
+$ TEXT = "Sign Certificate Request"
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[04;01H"
+$ SAY ESC + "[04;''COL'H", COLOR, TEXT, NORM
+$!
+$ CTR = 1
+$ ROW = 6
+$ COL = 2
+$ TOP_ROW = ROW
+$ MSG_ROW = TT_ROWS - 1
+$!
+$!------------------------------------------------------------------------------
+$! Initialize the Request Data
+$!------------------------------------------------------------------------------
+$!
+$ IF F$SEARCH ("''SSL_CONF_FILE'") .NES. ""
+$ THEN 
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Reading Configuration ...", NORM
+$ ELSE
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Initializing Configuration ...", NORM
+$ ENDIF
+$!
+$ _ca = "ca"
+$!
+$ _default_ca = "CA_default_ca"
+$ _default_ca_upd = "Y"
+$!
+$ _default_serfile = "SSL$DB:SERIAL.TXT"
+$ _default_serfile_upd = "Y"
+$!
+$ _default_idxfile = "SSL$DB:INDEX.TXT"
+$ _default_idxfile_upd = "Y"
+$!
+$ _default_crtfile = "SSL$CRT:SERVER_CA.CRT"
+$ _default_crtfile_upd = "Y"
+$!
+$ _default_keyfile = "SSL$KEY:SERVER_CA.KEY"
+$ _default_keyfile_upd = "Y"
+$!
+$ _default_csrfile = "SSL$CSR:SERVER.CSR"
+$ _default_csrfile_upd = "Y"
+$!
+$ _default_sgnfile = "SSL$CRT:SIGNED.CRT"
+$ _default_sgnfile_upd = "Y"
+$!
+$ _default_newcert = "SSL$CRT"
+$ _default_newcert_upd = "Y"
+$!
+$ _default_md = "md5"
+$ _default_md_upd = "Y"
+$!
+$ _default_days = "365"
+$ _default_days_upd = "Y"
+$!
+$ _default_policy = "policy_anything"
+$ _default_policy_upd = "Y"
+$!
+$ _policy_countryName = "optional"
+$ _policy_countryName_upd = "Y"
+$!
+$ _policy_stateOrProvinceName = "optional"
+$ _policy_stateOrProvinceName_upd = "Y"
+$!
+$ _policy_localityName = "optional"
+$ _policy_localityName_upd = "Y"
+$!
+$ _policy_organizationName = "optional"
+$ _policy_organizationName_upd = "Y"
+$!
+$ _policy_organizationalUnitName = "optional"
+$ _policy_organizationalUnitName_upd = "Y"
+$!
+$ _policy_commonName = "supplied"
+$ _policy_commonName_upd = "Y"
+$!
+$ _policy_emailAddress = "optional"
+$ _policy_emailAddress_upd = "Y"
+$!
+$ _default_x509_extensions = "CA_x509_extensions"
+$ _default_x509_extensions_upd = "Y"
+$!
+$ _x509_basicContraints = "CA:FALSE"
+$ _x509_basicContraints_upd = "Y"
+$!
+$ _x509_nsCertType = "client,email,objsign,server"
+$ _x509_nsCertType_upd = "Y"
+$!
+$ _x509_nsComment = "SSL Generated Certificate"
+$ _x509_nsComment_upd = "Y"
+$!
+$ _x509_subjectKeyIdentifier = "hash"
+$ _x509_subjectKeyIdentifier_upd = "Y"
+$!
+$ _x509_authorityKeyIdentifier = "keyid,issuer:always"
+$ _x509_authorityKeyIdentifier_upd = "Y"
+$!
+$ IF F$SEARCH ("''SSL_CONF_FILE'") .NES. ""
+$ THEN 
+$     GET_CONF_DATA "[''_ca']#default_ca"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN 
+$         _default_ca = SSL_CONF_DATA
+$         _default_ca_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_ca']#serial"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_serfile = F$PARSE (SSL_CONF_DATA,"SSL$ROOT:",,"DEVICE") + -
+ 		             F$PARSE (SSL_CONF_DATA,"[DB]",,"DIRECTORY") + -
+ 		             F$PARSE (SSL_CONF_DATA,"SERIAL",,"NAME") + -
+ 		             F$PARSE (SSL_CONF_DATA,".TXT",,"TYPE") 
+$         _default_serfile_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_ca']#database"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_idxfile = F$PARSE (SSL_CONF_DATA,"SSL$ROOT:",,"DEVICE") + -
+ 		             F$PARSE (SSL_CONF_DATA,"[DB]",,"DIRECTORY") + -
+ 		             F$PARSE (SSL_CONF_DATA,"INDEX",,"NAME") + -
+ 		             F$PARSE (SSL_CONF_DATA,".TXT",,"TYPE") 
+$         _default_idxfile_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_ca']#certificate"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_crtfile = F$PARSE (SSL_CONF_DATA,"SSL$ROOT:",,"DEVICE") + -
+ 		             F$PARSE (SSL_CONF_DATA,"[CRT]",,"DIRECTORY") + -
+ 		             F$PARSE (SSL_CONF_DATA,"SERVER_CA",,"NAME") + -
+ 		             F$PARSE (SSL_CONF_DATA,".CRT",,"TYPE") 
+$         _default_crtfile_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_ca']#private_key"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_keyfile = F$PARSE (SSL_CONF_DATA,"SSL$ROOT:",,"DEVICE") + -
+ 		             F$PARSE (SSL_CONF_DATA,"[KEY]",,"DIRECTORY") + -
+ 		             F$PARSE (SSL_CONF_DATA,"SERVER_CA",,"NAME") + -
+ 		             F$PARSE (SSL_CONF_DATA,".KEY",,"TYPE") 
+$         _default_keyfile_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_ca']#new_certs_dir"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_newcert = SSL_CONF_DATA
+$         _default_newcert_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_ca']#default_md"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_md = SSL_CONF_DATA
+$         _default_md_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_ca']#default_days"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_days = SSL_CONF_DATA
+$         _default_days_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_ca']#policy"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_policy = SSL_CONF_DATA
+$         _default_policy_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_policy']#countryName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _policy_countryName = SSL_CONF_DATA
+$         _policy_countryName_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_policy']#stateOrProvinceName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _policy_stateOrProvinceName = SSL_CONF_DATA
+$         _policy_stateOrProvinceName_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_policy']#localityName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _policy_localityName = SSL_CONF_DATA
+$         _policy_localityName_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_policy']#organizationName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _policy_organizationName = SSL_CONF_DATA
+$         _policy_organizationName_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_policy']#organizationalUnitName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _policy_organizationalUnitName = SSL_CONF_DATA
+$         _policy_organizationalUnitName_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_policy']#commonName"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _policy_commonName = SSL_CONF_DATA
+$         _policy_commonName_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_policy']#emailAddress"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _policy_emailAddress = SSL_CONF_DATA
+$         _policy_emailAddress_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_ca']#x509_extensions"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _default_x509_extensions = SSL_CONF_DATA
+$         _default_x509_extensions_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_x509_extensions']#basicConstraints"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _x509_basicConstraints = SSL_CONF_DATA
+$         _x509_basicConstraints_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_x509_extensions']#nsCertType"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _x509_nsCertType = SSL_CONF_DATA
+$         _x509_nsCertType_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_x509_extensions']#nsComment"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _x509_nsComment = SSL_CONF_DATA
+$         _x509_nsComment_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_x509_extensions']#subjectKeyIdentifier"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _x509_subjectKeyIdentifier = SSL_CONF_DATA
+$         _x509_subjectKeyIdentifier_upd = "N"
+$     ENDIF
+$!
+$     GET_CONF_DATA "[''_default_x509_extensions']#authorityKeyIdentifier"
+$     IF SSL_CONF_DATA .NES. ""
+$     THEN
+$         _x509_authorityKeyIdentifier = SSL_CONF_DATA
+$         _x509_authorityKeyIdentifier_upd = "N"
+$     ENDIF
+$ ENDIF
+$!
+$ SET_USER_DATA "[''_ca']#default_ca#D#''_default_ca'##S###''_default_ca_upd'#N#N"
+$ SET_USER_DATA "[''_default_ca']#serial#D#''_default_serfile'#Serial File ?#F###''_default_serfile_upd'#N#N"
+$ SET_USER_DATA "[''_default_ca']#database#D#''_default_idxfile'#Database File ?#F###''_default_idxfile_upd'#N#N"
+$ SET_USER_DATA "[''_default_ca']#certificate#D#''_default_crtfile'#CA Certificate File ?#F###''_default_crtfile_upd'#Y#N"
+$ SET_USER_DATA "[''_default_ca']#private_key#D#''_default_keyfile'#CA Certificate Key File ?#F###''_default_keyfile_upd'#Y#N"
+$ SET_USER_DATA "[]#default_csrfile#-#''_default_csrfile'#Certificate Request File ?#F###''_default_csrfile_upd'#Y#N"
+$ SET_USER_DATA "[]#default_sgnfile#-#''_default_sgnfile'#Signed Certificate File ?#F###''_default_sgnfile_upd'#Y#N"
+$ SET_USER_DATA "[''_default_ca']#new_certs_dir#D#''_default_newcert'#New Certificate Directory ?#S###''_default_newcert_upd'#N#N"
+$ SET_USER_DATA "[''_default_ca']#default_md#D#''_default_md'#Default Digest ?#I###''_default_md_upd'#N#N"
+$ SET_USER_DATA "[''_default_ca']#default_days#D#''_default_days'#Default Days ?#I###''_default_days_upd'#Y#N"
+$ SET_USER_DATA "[''_default_ca']#policy#D#''_default_policy'#Default Policy ?#S###''_default_policy_upd'#N#N"
+$ SET_USER_DATA "[''_default_policy']#countryName#D#''_policy_countryName'#Country Name Policy ?#S###''_policy_countryName_upd'#N#N"
+$ SET_USER_DATA "[''_default_policy']#stateOrProvinceName#D#''_policy_stateOrProvinceName'#State or Province Name Policy ?#S###''_policy_stateOrProvinceName_upd'#N#N"
+$ SET_USER_DATA "[''_default_policy']#localityName#D#''_policy_localityName'#Locality Name Policy ?#S###''_policy_localityName_upd'#N#N"
+$ SET_USER_DATA "[''_default_policy']#organizationName#D#''_policy_organizationName'#Organization Name Policy ?#S###''_policy_organizationName_upd'#N#N"
+$ SET_USER_DATA "[''_default_policy']#organizationalUnitName#D#''_policy_organizationalUnitName'#Organization Unit Name Policy ?#S###''_policy_organizationalUnitName_upd'#N#N"
+$ SET_USER_DATA "[''_default_policy']#commonName#D#''_policy_commonName'#Common Name Policy ?#S###''_policy_commonName_upd'#N#N"
+$ SET_USER_DATA "[''_default_policy']#emailAddress#D#''_policy_emailAddress'#Email Address Policy ?#S###''_policy_emailAddress_upd'#N#N"
+$ SET_USER_DATA "[''_default_ca']#x509_extensions#D#''_default_x509_extensions'#X509 Extensions ?#S###''_default_x509_extensions_upd'#N#N"
+$ SET_USER_DATA "[''_default_x509_extensions']#basicConstraints#D#''_x509_basicConstraints'#X509 Basic Constraints ?#S###''_x509_basicConstraints_upd'#N#N"
+$ SET_USER_DATA "[''_default_x509_extensions']#nsCertType#D#''_x509_nsCertType'#X509 NS Cert Type ?#S###''_x509_nsCertType_upd'#N#N"
+$ SET_USER_DATA "[''_default_x509_extensions']#nsComment#D#''_x509_nsComment'#X509 NS Comment ?#S###''_x509_nsComment_upd'#N#N"
+$ SET_USER_DATA "[''_default_x509_extensions']#subjectKeyIdentifier#D#''_x509_subjectKeyIdentifier'#X509 Subject Key Identifier ?#S###''_x509_subjectKeyIdentifier_upd'#N#N"
+$ SET_USER_DATA "[''_default_x509_extensions']#authorityKeyIdentifier#D#''_x509_authorityKeyIdentifier'#X509 Authority Key Identifier ?#S###''_x509_authorityKeyIdentifier_upd'#N#N"
+$ SET_USER_DATA "[]#pem_pass_phrase#-##PEM Pass Phrase ?#P#1###Y#N"
+$ SET_USER_DATA "[]#display_certificate#-#N#Display the Certificate ?#S##1##Y#N"
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$!
+$!------------------------------------------------------------------------------
+$! Confirm/Update the SSL Configuration Data
+$!------------------------------------------------------------------------------
+$!
+$PROMPT_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN 
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     TYP = F$ELEMENT (5,"#",SSL_USER_DATA_'CTR') ! Value Type
+$     MIN = F$ELEMENT (6,"#",SSL_USER_DATA_'CTR') ! Value Minimum Length
+$     MAX = F$ELEMENT (7,"#",SSL_USER_DATA_'CTR') ! Value Maximum Length
+$     UPD = F$ELEMENT (8,"#",SSL_USER_DATA_'CTR') ! Entry Updated ?
+$     REQ = F$ELEMENT (9,"#",SSL_USER_DATA_'CTR') ! Entry Required for Input ?
+$     CFM = F$ELEMENT (10,"#",SSL_USER_DATA_'CTR')! Confirm Input  ?
+$     CONFIRMED = 0
+$     IF REQ .EQS. "N"
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO PROMPT_LOOP
+$     ENDIF
+$     IF ROW .GT. MSG_ROW - 2
+$     THEN 
+$         SAY ESC + "[''TOP_ROW';01H", CEOS
+$	  ROW = TOP_ROW
+$     ENDIF
+$!
+$CONFIRM_LOOP:
+$!
+$     IF PRM .EQS. "" 
+$     THEN 
+$         PROMPT = ESC + "[''ROW';''COL'H''ITM' ? [''DEF'] ''CEOL'"
+$     ELSE
+$         PROMPT = ESC + "[''ROW';''COL'H''PRM' [''DEF'] ''CEOL'"
+$     ENDIF
+$     IF TYP .EQS. "P" THEN SET TERMINAL /NOECHO
+$     ASK "''PROMPT'" ANS /END_OF_FILE=EXIT
+$     IF TYP .EQS. "P" THEN SET TERMINAL /ECHO
+$     ANS = F$EDIT (ANS,"TRIM")
+$     IF ANS .EQS. "" THEN ANS = DEF
+$     IF TYP .EQS. "F"
+$     THEN
+$         ANS = F$PARSE ("''ANS'","''DEF'",,,"SYNTAX_ONLY")
+$     ENDIF
+$     IF TYP .EQS. "I" .AND. F$TYPE (ANS) .NES. "INTEGER"
+$     THEN 
+$         CALL INVALID_ENTRY
+$         SAY ESC + "[''ROW';01H", CEOS
+$         GOTO PROMPT_LOOP
+$     ENDIF
+$     IF (TYP .EQS. "S" .OR. TYP .EQS. "P") .AND. -
+         ((MIN .NES. "" .AND. F$LENGTH (ANS) .LT. F$INTEGER(MIN)) .OR. -
+          (MAX .NES. "" .AND. F$LENGTH (ANS) .GT. F$INTEGER(MAX)))
+$     THEN 
+$         CALL INVALID_ENTRY
+$         SAY ESC + "[''ROW';01H", CEOS
+$	  IF TYP .EQS. "S" THEN GOTO PROMPT_LOOP
+$         IF TYP .EQS. "P" THEN GOTO CONFIRM_LOOP
+$     ENDIF
+$     ROW = ROW + 1
+$     IF CFM .EQS. "Y"
+$     THEN
+$         IF CONFIRMED .EQ. 0
+$	  THEN
+$	      CONFIRMED = 1
+$	      CONFIRMED_ANS = ANS
+$	      PRM = "Confirm ''PRM'"
+$	      GOTO CONFIRM_LOOP
+$         ELSE
+$	      IF ANS .NES. CONFIRMED_ANS
+$	      THEN 
+$                 CALL INVALID_ENTRY
+$		  ROW = ROW - 2
+$                 SAY ESC + "[''ROW';01H", CEOS
+$                 GOTO PROMPT_LOOP
+$	      ENDIF
+$         ENDIF
+$     ENDIF
+$     IF ANS .NES. DEF THEN SSL_USER_DATA_'CTR' = "''KEY'#''ITM'#''VAL'#''ANS'#''PRM'#''TYP'#''MIN'#''MAX'#Y#''REQ'#''CFM'"
+$     CTR = CTR + 1
+$     GOTO PROMPT_LOOP
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Save the SSL Configuration Data
+$!------------------------------------------------------------------------------
+$!
+$ CTR = 1
+$ SAY ESC + "[''MSG_ROW';01H", BLNK, " Saving Configuration ...", NORM
+$!
+$SAVE_CONF_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN 
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     TYP = F$ELEMENT (5,"#",SSL_USER_DATA_'CTR') ! Value Type
+$     MIN = F$ELEMENT (6,"#",SSL_USER_DATA_'CTR') ! Value Minimum Length
+$     MAX = F$ELEMENT (7,"#",SSL_USER_DATA_'CTR') ! Value Maximum Length
+$     UPD = F$ELEMENT (8,"#",SSL_USER_DATA_'CTR') ! Entry Updated ?
+$     REQ = F$ELEMENT (9,"#",SSL_USER_DATA_'CTR') ! Entry Required for Input ?
+$     CFM = F$ELEMENT (10,"#",SSL_USER_DATA_'CTR')! Confirm Input ?
+$     IF UPD .NES. "Y" .OR. VAL .EQS. "-"
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO SAVE_CONF_LOOP
+$     ENDIF
+$     IF VAL .EQS. "D"
+$     THEN 
+$         SET_CONF_DATA "''KEY'#''ITM'" "''DEF'"
+$     ELSE
+$         SET_CONF_DATA "''KEY'#''ITM'" "''PRM'"
+$         SET_CONF_DATA "''KEY'#''ITM'_default" "''DEF'"
+$     ENDIF
+$     IF MIN .NES. "" THEN SET_CONF_DATA "''KEY'#''ITM'_min" "''MIN'"
+$     IF MAX .NES. "" THEN SET_CONF_DATA "''KEY'#''ITM'_max" "''MAX'"
+$     CTR = CTR + 1
+$     GOTO SAVE_CONF_LOOP
+$ ENDIF
+$!
+$ PURGE /NOLOG /NOCONFIRM 'SSL_CONF_FILE'
+$ RENAME 'SSL_CONF_FILE'; ;1
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$!
+$!------------------------------------------------------------------------------
+$! Create the Certificiate Authority
+$!------------------------------------------------------------------------------
+$!
+$SKIP:
+$!
+$ SAY ESC + "[''MSG_ROW';01H", BLNK, " Signing Certificate Request ...", NORM
+$!
+$ X1 = 2
+$ Y1 = TOP_ROW
+$ X2 = TT_COLS - 2
+$ Y2 = MSG_ROW - 1
+$!
+$ GET_USER_DATA "[]#pem_pass_phrase"
+$ _pem_pass_phrase = SSL_USER_DATA
+$ GET_USER_DATA "[''_default_ca']#database"
+$ _default_idxfile = SSL_USER_DATA
+$ GET_USER_DATA "[''_default_ca']#serial"
+$ _default_serfile = SSL_USER_DATA
+$ GET_USER_DATA "[]#default_csrfile"
+$ _default_csrfile = SSL_USER_DATA
+$ GET_USER_DATA "[]#default_sgnfile"
+$ _default_sgnfile = SSL_USER_DATA
+$ GET_USER_DATA "[]#display_certificate"
+$ _display_certificate = SSL_USER_DATA
+$!
+$ IF F$SEARCH ("''_default_idxfile'") .EQS. ""
+$ THEN
+$     OPEN /WRITE OFILE '_default_idxfile'
+$     CLOSE OFILE
+$ ENDIF
+$!
+$ IF F$SEARCH ("''_default_serfile'") .EQS. ""
+$ THEN
+$     OPEN /WRITE OFILE '_default_serfile'
+$     WRITE OFILE "01"
+$     CLOSE OFILE
+$ ENDIF
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SHOW SYSTEM /FULL /OUT=SYS$LOGIN:SSL_CA_'PID'.RND
+$!
+$ OPEN /WRITE OFILE SYS$LOGIN:SSL_CA_'PID'.COM
+$ WRITE OFILE "$ SET NOON"
+$ WRITE OFILE "$ SET MESSAGE /NOFACILITY /NOIDENTIFICATION /NOSEVERITY /NOTEXT"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG RANDFILE    SYS$LOGIN:SSL_CA_''PID'.RND"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_CA_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_CA_''PID'.LOG"
+$ WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$ WRITE OFILE "$ OPENSSL ca -config ''SSL_CONF_FILE' -out ''_default_sgnfile' -infiles ''_default_csrfile'"
+$ WRITE OFILE "''_pem_pass_phrase'"
+$ WRITE OFILE "y"
+$ WRITE OFILE "y"
+$ WRITE OFILE "$ SET MESSAGE /FACILITY /IDENTIFICATION /SEVERITY /TEXT"
+$ CLOSE OFILE
+$!
+$ @SYS$LOGIN:SSL_CA_'PID'.COM
+$!
+$ DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_CA_'PID'.RND;*
+$ DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_CA_'PID'.COM;*
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ SEARCH SYS$LOGIN:SSL_CA_'PID'.LOG /OUT=SYS$LOGIN:SSL_CA_'PID'.ERR "error:"
+$ IF F$SEARCH ("SYS$LOGIN:SSL_CA_''PID'.ERR") .NES. "" 
+$ THEN 
+$     IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_CA_''PID'.ERR","ALQ") .NE. 0
+$     THEN 
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_CA_'PID'.ERR;*
+$         SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$         SHOW_FILE "SYS$LOGIN:SSL_CA_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >" 
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_CA_'PID'.LOG;*
+$         GOTO EXIT
+$     ENDIF
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_CA_'PID'.ERR;*
+$ ENDIF
+$!
+$ DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_CA_'PID'.LOG;*
+$! 
+$ IF F$EDIT (_display_certificate,"TRIM,UPCASE") .EQS. "Y"
+$ THEN 
+$     SAY ESC + "[''MSG_ROW';01H", BLNK, " Generating Output ...", NORM, CEOL
+$!
+$     OPEN /WRITE OFILE SYS$LOGIN:SSL_X509_'PID'.COM
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_X509_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_X509_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$     WRITE OFILE "$ OPENSSL x509 -noout -text -in ''_default_sgnfile'"
+$     CLOSE OFILE
+$!
+$     @SYS$LOGIN:SSL_X509_'PID'.COM
+$!
+$     DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.COM;*
+$!
+$     DEFINE /USER /NOLOG SYS$ERROR  NL:
+$     DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$     SEARCH SYS$LOGIN:SSL_X509_'PID'.LOG /OUT=SYS$LOGIN:SSL_X509_'PID'.ERR ":error:"
+$     IF F$SEARCH ("SYS$LOGIN:SSL_X509_''PID'.ERR") .NES. "" 
+$     THEN 
+$         IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_X509_''PID'.ERR","ALQ") .NE. 0
+$         THEN 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.ERR;*
+$             SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$             SHOW_FILE "SYS$LOGIN:SSL_X509_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >" 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.LOG;*
+$             GOTO EXIT
+$         ENDIF
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.ERR;*
+$     ENDIF
+$!
+$     SAY ESC + "[''MSG_ROW';01H''CEOS'"
+$     SHOW_FILE "SYS$LOGIN:SSL_X509_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ''_default_sgnfile' >" 
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.LOG;*
+$     GOTO EXIT
+$ ENDIF
+$!
+$ TEXT = "Press return to continue"
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$ PROMPT = ESC + "[''MSG_ROW';''COL'H''TEXT'"
+$ ASK "''PROMPT'" OPT
+$!
+$GOTO EXIT
+$!
+$!------------------------------------------------------------------------------
+$! Set the User Data
+$!------------------------------------------------------------------------------
+$!
+$SET_USER_DATA: SUBROUTINE
+$!
+$ IF F$TYPE (SSL_USER_DATA_MAX) .EQS. ""
+$ THEN
+$     SSL_USER_DATA_MAX == 1
+$ ELSE
+$     SSL_USER_DATA_MAX == SSL_USER_DATA_MAX + 1
+$ ENDIF
+$!
+$ SSL_USER_DATA_'SSL_USER_DATA_MAX' == "''P1'"
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Find the Request Data
+$!------------------------------------------------------------------------------
+$!
+$GET_USER_DATA: SUBROUTINE
+$!
+$ CTR = 1
+$ USER_KEY = F$ELEMENT (0,"#",P1)
+$ USER_ITM = F$ELEMENT (1,"#",P1)
+$!
+$GET_USER_DATA_LOOP:
+$!
+$ IF CTR .LE. SSL_USER_DATA_MAX
+$ THEN
+$     KEY = F$ELEMENT (0,"#",SSL_USER_DATA_'CTR') ! Key Name
+$     ITM = F$ELEMENT (1,"#",SSL_USER_DATA_'CTR') ! Item Name
+$     VAL = F$ELEMENT (2,"#",SSL_USER_DATA_'CTR') ! Item Value Contains Default or Prompt
+$     DEF = F$ELEMENT (3,"#",SSL_USER_DATA_'CTR') ! Default Value
+$     PRM = F$ELEMENT (4,"#",SSL_USER_DATA_'CTR') ! Prompt Value
+$     IF USER_KEY .NES. KEY .OR. USER_ITM .NES. ITM
+$     THEN 
+$         CTR = CTR + 1
+$         GOTO GET_USER_DATA_LOOP
+$     ENDIF
+$     IF VAL .EQS. "-" THEN SSL_USER_DATA == "''DEF'"
+$     IF VAL .EQS. "D" THEN SSL_USER_DATA == "''DEF'"
+$     IF VAL .EQS. "P" THEN SSL_USER_DATA == "''PRM'"
+$ ENDIF
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Delete the User Data
+$!------------------------------------------------------------------------------
+$!
+$DEL_USER_DATA: SUBROUTINE
+$!
+$ IF F$TYPE (SSL_USER_DATA_MAX) .EQS. "" THEN GOTO DEL_USER_DATA_END
+$!
+$DEL_USER_DATA_LOOP:
+$!
+$ IF F$TYPE (SSL_USER_DATA_'SSL_USER_DATA_MAX') .NES. "" 
+$ THEN
+$     DELETE /SYMBOL /GLOBAL SSL_USER_DATA_'SSL_USER_DATA_MAX'
+$     SSL_USER_DATA_MAX == SSL_USER_DATA_MAX - 1
+$     GOTO DEL_USER_DATA_LOOP
+$ ENDIF
+$!
+$ DELETE /SYMBOL /GLOBAL SSL_USER_DATA_MAX
+$!
+$DEL_USER_DATA_END:
+$!
+$ IF F$TYPE (SSL_USER_DATA) .NES. "" THEN DELETE /SYMBOL /GLOBAL SSL_USER_DATA
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Display the invalid entry 
+$!------------------------------------------------------------------------------
+$!
+$INVALID_ENTRY: SUBROUTINE
+$!
+$ SAY ESC + "[''MSG_ROW';01H", BELL, " Invalid Entry, Try again ...''CEOL'"
+$ Wait 00:00:01.5
+$ SAY ESC + "[''MSG_ROW';01H", CEOL
+$!
+$ EXIT
+$!
+$ ENDSUBROUTINE
+$!
+$!------------------------------------------------------------------------------
+$! Exit the procedure
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ DEASSIGN SYS$OUTPUT
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ DEASSIGN SYS$ERROR
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ CLOSE OFILE
+$!
+$ DEL_USER_DATA
+$!
+$ IF F$TYPE (SSL_CONF_DATA) .NES. "" THEN DELETE /SYMBOL /GLOBAL SSL_CONF_DATA
+$!
+$ IF F$GETDVI ("TT:","TT_NOECHO") .AND. .NOT. TT_NOECHO THEN SET TERMINAL /ECHO
+$!
+$ IF F$SEARCH ("SYS$LOGIN:SSL_CA_''PID'.%%%;*") .NES. "" THEN DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_CA_'PID'.%%%;*
+$ IF F$SEARCH ("SYS$LOGIN:SSL_X509_''PID'.%%%;*") .NES. "" THEN DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.%%%;*
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/cert_tool/ssl$view_cert.com

@@ -0,0 +1,245 @@
+$!
+$!------------------------------------------------------------------------------
+$! SSL$VIEW_CERT.COM - SSL View Certificate procedure
+$!------------------------------------------------------------------------------
+$!
+$ Verify = F$VERIFY (0)
+$ Set NoOn
+$ Set NoControl=Y
+$!
+$!------------------------------------------------------------------------------
+$! Description 
+$!------------------------------------------------------------------------------
+$!
+$! This procedure prompts the user through creating a Server Certificate.
+$!
+$! The parameters used are:
+$!
+$! 	P1	- Certificate or Certificate Request (i.e. "CRT" or "CSR")
+$!
+$!------------------------------------------------------------------------------
+$! Define symbols
+$!------------------------------------------------------------------------------
+$!
+$ DELETE := DELETE
+$ SAY := WRITE SYS$OUTPUT
+$ ASK := READ SYS$COMMAND /END_OF_FILE=EXIT /PROMPT=
+$ PID = F$GETJPI ("","PID")
+$ TT_NOECHO = F$GETDVI ("TT:","TT_NOECHO")
+$ On Control_Y THEN GOTO EXIT
+$ Set Control=Y
+$!
+$ TT_ROWS = F$GETDVI ("TT:","TT_PAGE")
+$ TT_COLS = F$GETDVI ("TT:","DEVBUFSIZ")
+$!
+$ INIT_TERM := @SSL$COM:SSL$INIT_TERM
+$ PICK_FILE := @SSL$COM:SSL$PICK_FILE 
+$ SHOW_FILE := @SSL$COM:SSL$SHOW_FILE 
+$!
+$ ESC[0,8] = 27 	! Set the Escape Character
+$ BELL[0,8] = 7 	! Ring the terminal Bell
+$ RED = 1		! Color - Red
+$ FGD = 30		! Foreground
+$ BGD = 0		! Background
+$ CSCR = ESC + "[2J"	! Clear the Screen 
+$ CEOS = ESC + "[0J"	! Clear to the End of the Screen 
+$ CEOL = ESC + "[0K"	! Clear to the End of the Line
+$ NORM = ESC + "[0m"	! Turn Attributes off
+$ BLNK = ESC + "[5m"    ! Turn on BLINK Attribute
+$ WIDE = ESC + "#6"     ! Turn on WIDE Attribute
+$!
+$!------------------------------------------------------------------------------
+$! Run the SSL setup if it hasn't been run yet
+$!------------------------------------------------------------------------------
+$!
+$ IF F$TRNLNM ("SSL$ROOT") .EQS. ""
+$ THEN
+$     IF F$SEARCH ("SSL$COM:SSL$INIT_ENV.COM") .NES. ""
+$     THEN 
+$         @SSL$COM:SSL$INIT_ENV.COM
+$     ELSE
+$         SAY BELL, "Unable to locate SSL$COM:SSL$INIT_ENV.COM ..."
+$	  GOTO EXIT
+$     ENDIF
+$ ENDIF
+$!
+$!------------------------------------------------------------------------------
+$! Display the Page Header
+$!------------------------------------------------------------------------------
+$!
+$ INIT_TERM
+$ BCOLOR = BGD
+$ FCOLOR = FGD + RED
+$ COLOR = ESC + "[''BCOLOR';''FCOLOR'm"
+$!
+$ TEXT = "SSL Certificate Tool"
+$ COL = (TT_COLS - (F$LENGTH (TEXT) * 2)) / 4
+$!
+$ SAY ESC + "[01;01H", CSCR
+$ SAY ESC + "[02;''COL'H", COLOR, WIDE, TEXT, NORM
+$!
+$ IF P1 .EQS. "CSR"
+$ THEN 
+$     TEXT = "View Certificate Request"
+$ ELSE
+$     TEXT = "View Certificate"
+$ ENDIF
+$ COL = (TT_COLS - F$LENGTH (TEXT)) / 2
+$!
+$ SAY ESC + "[04;01H"
+$ SAY ESC + "[04;''COL'H", COLOR, TEXT, NORM
+$!
+$ CTR = 1
+$ ROW = 6
+$ COL = 2
+$ TOP_ROW = ROW
+$ MSG_ROW = TT_ROWS - 1
+$!
+$!------------------------------------------------------------------------------
+$! Initialize the Request Data
+$!------------------------------------------------------------------------------
+$!
+$ IF P1 .NES. "CRT" .AND. P1 .NES. "CSR"
+$ THEN 
+$     PRM = "Display File:"
+$     DEF = "*.*"
+$ ENDIF
+$!
+$ IF P1 .EQS. "CRT"
+$ THEN 
+$     PRM = "Display Certificate File:"
+$     DEF = "SSL$CRT:*.CRT"
+$ ENDIF
+$!
+$ IF P1 .EQS. "CSR"
+$ THEN 
+$     PRM = "Display Certificate Request File:"
+$     DEF = "SSL$CSR:*.CSR"
+$ ENDIF
+$!
+$ SAY ESC + "[''MSG_ROW';01H", CEOS
+$!
+$!------------------------------------------------------------------------------
+$! Confirm/Update the SSL Configuration Data
+$!------------------------------------------------------------------------------
+$!
+$PROMPT_LOOP:
+$!
+$ PROMPT = ESC + "[''ROW';''COL'H''PRM' ? [''DEF'] ''CEOL'"
+$ ASK "''PROMPT'" _view_file_name
+$ _view_file_name = F$EDIT (_view_file_name,"TRIM")
+$ IF _view_file_name .EQS. "" THEN _view_file_name = DEF
+$!
+$ X1 = 2
+$ Y1 = TOP_ROW
+$ X2 = TT_COLS - 2
+$ Y2 = MSG_ROW - 1
+$!
+$PICK_FILE:
+$!
+$ PICK_FILE "''_view_file_name'" 'X1' 'Y1' 'X2' 'Y2' "< Select a File >" 
+$!
+$ SAY ESC + "[''TOP_ROW';01H", CEOS
+$! 
+$ IF SSL_FILE_NAME .EQS. "" THEN GOTO EXIT
+$!
+$!------------------------------------------------------------------------------
+$! Create the Certificiate Authority
+$!------------------------------------------------------------------------------
+$!
+$ SAY ESC + "[''MSG_ROW';01H", BLNK, " Generating Output ...", NORM, CEOL
+$!
+$ IF P1 .EQS. "CRT"
+$ THEN 
+$     OPEN /WRITE OFILE SYS$LOGIN:SSL_X509_'PID'.COM
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_X509_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_X509_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$     WRITE OFILE "$ OPENSSL x509 -noout -text -in ''SSL_FILE_NAME'"
+$     CLOSE OFILE
+$!
+$     @SYS$LOGIN:SSL_X509_'PID'.COM
+$!
+$     DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.COM;*
+$!
+$     DEFINE /USER /NOLOG SYS$ERROR  NL:
+$     DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$     SEARCH SYS$LOGIN:SSL_X509_'PID'.LOG /OUT=SYS$LOGIN:SSL_X509_'PID'.ERR ":error:"
+$     IF F$SEARCH ("SYS$LOGIN:SSL_X509_''PID'.ERR") .NES. "" 
+$     THEN 
+$         IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_X509_''PID'.ERR","ALQ") .NE. 0
+$         THEN 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.ERR;*
+$             SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$             SHOW_FILE "SYS$LOGIN:SSL_X509_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >" 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.LOG;*
+$             GOTO EXIT
+$         ENDIF
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.ERR;*
+$     ENDIF
+$!
+$     SAY ESC + "[''MSG_ROW';01H''CEOS'"
+$     SHOW_FILE "SYS$LOGIN:SSL_X509_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ''SSL_FILE_NAME' >" 
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.LOG;*
+$     GOTO PICK_FILE
+$ ENDIF
+$!
+$ IF P1 .EQS. "CSR"
+$ THEN 
+$     OPEN /WRITE OFILE SYS$LOGIN:SSL_REQ_'PID'.COM
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$ERROR   SYS$LOGIN:SSL_REQ_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$OUTPUT  SYS$LOGIN:SSL_REQ_''PID'.LOG"
+$     WRITE OFILE "$ DEFINE /USER /NOLOG SYS$COMMAND SYS$INPUT"
+$     WRITE OFILE "$ OPENSSL req -noout -text -in ''SSL_FILE_NAME'"
+$     CLOSE OFILE
+$!
+$     @SYS$LOGIN:SSL_REQ_'PID'.COM
+$!
+$     DELETE/NOLOG/NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.COM;*
+$!
+$     DEFINE /USER /NOLOG SYS$ERROR  NL:
+$     DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$     SEARCH SYS$LOGIN:SSL_REQ_'PID'.LOG /OUT=SYS$LOGIN:SSL_REQ_'PID'.ERR ":error:"
+$     IF F$SEARCH ("SYS$LOGIN:SSL_REQ_''PID'.ERR") .NES. "" 
+$     THEN 
+$         IF F$FILE_ATTRIBUTE ("SYS$LOGIN:SSL_REQ_''PID'.ERR","ALQ") .NE. 0
+$         THEN 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.ERR;*
+$             SAY ESC + "[''MSG_ROW';01H''BELL'''CEOS'"
+$             SHOW_FILE "SYS$LOGIN:SSL_REQ_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ERROR >" 
+$             DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.LOG;*
+$             GOTO EXIT
+$         ENDIF
+$         DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.ERR;*
+$     ENDIF
+$!
+$     SAY ESC + "[''MSG_ROW';01H''CEOS'"
+$     SHOW_FILE "SYS$LOGIN:SSL_REQ_''PID'.LOG" 'X1' 'Y1' 'X2' 'Y2' "< ''SSL_FILE_NAME' >" 
+$     DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.LOG;*
+$     GOTO PICK_FILE
+$ ENDIF
+$!
+$ SAY ESC + "[''MSG_ROW';01H''CEOS'"
+$ SHOW_FILE "''SYS$LOGIN:SSL_FILE_NAME'" 'X1' 'Y1' 'X2' 'Y2' "< ''SSL_FILE_NAME' >"
+$ GOTO PICK_FILE
+$!
+$!------------------------------------------------------------------------------
+$! Exit the procedure
+$!------------------------------------------------------------------------------
+$!
+$EXIT:
+$!
+$ DEFINE /USER /NOLOG SYS$ERROR  NL:
+$ DEFINE /USER /NOLOG SYS$OUTPUT NL:
+$ CLOSE OFILE
+$!
+$ IF F$TYPE (SSL_FILE_NAME) .NES. "" THEN DELETE /SYMBOL /GLOBAL SSL_FILE_NAME
+$!
+$ IF F$GETDVI ("TT:","TT_NOECHO") .AND. .NOT. TT_NOECHO THEN SET TERMINAL /ECHO
+$!
+$ IF F$SEARCH ("SYS$LOGIN:SSL_REQ_''PID'.%%%;*") .NES. "" THEN DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_REQ_'PID'.%%%;*
+$ IF F$SEARCH ("SYS$LOGIN:SSL_X509_''PID'.%%%;*") .NES. "" THEN DELETE /NOLOG /NOCONFIRM SYS$LOGIN:SSL_X509_'PID'.%%%;*
+$!
+$ Verify = F$VERIFY (Verify)
+$!
+$ EXIT

VMS/install.com

@@ -26,47 +26,129 @@ $	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
 $	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
 $	DEFINE/NOLOG WRK_SSLCERTS WRK_SSLROOT:[CERTS]
 $	DEFINE/NOLOG WRK_SSLPRIVATE WRK_SSLROOT:[PRIVATE]
+$	DEFINE/NOLOG WRK_SSLCOM WRK_SSLROOT:[COM]
 $
 $	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
 	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
 $	IF F$PARSE("WRK_SSLINCLUDE:") .EQS. "" THEN -
 	   CREATE/DIR/LOG WRK_SSLINCLUDE:
-$	IF F$PARSE("WRK_SSLROOT:[VMS]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[VMS]
+$!	IF F$PARSE("WRK_SSLROOT:[VMS]") .EQS. "" THEN -
+$!	   CREATE/DIR/LOG WRK_SSLROOT:[VMS]
+$	IF F$PARSE("WRK_SSLCOM:") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLROOT:[COM]
 $
 $	IF F$SEARCH("WRK_SSLINCLUDE:vms_idhacks.h") .NES. "" THEN -
 	   DELETE WRK_SSLINCLUDE:vms_idhacks.h;*
 $
-$	OPEN/WRITE SF WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
-$	WRITE SYS$OUTPUT "%OPEN-I-CREATED,  ",F$SEARCH("WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM")," created."
-$	WRITE SF "$! Startup file for Openssl 0.9.2-RL 15-Mar-1999"
+$	OPEN/WRITE SF WRK_SSLCOM:SSL$STARTUP.COM
+$	WRITE SYS$OUTPUT "%OPEN-I-CREATED,  ",F$SEARCH("WRK_SSLCOM:SSL$STARTUP.COM")," created."
+$	WRITE SF "$! Startup file for SSL 0.9.2-RL 15-Mar-1999"
 $	WRITE SF "$!"
 $	WRITE SF "$! Do not edit this file, as it will be regenerated during next installation."
-$	WRITE SF "$! Instead, add or change SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
+$	WRITE SF "$! Instead, add or change SSL$COM:SSL$SYSTARTUP.COM"
 $	WRITE SF "$!"
-$	WRITE SF "$! P1	a qualifier to DEFINE.  For example ""/SYSTEM"" to get the logical names"
-$	WRITE SF "$!	defined in the system logical name table."
 $	WRITE SF "$!"
 $	WRITE SF "$	ARCH = ""VAX"""
 $	WRITE SF "$	IF F$GETSYI(""CPU"") .GE. 128 THEN ARCH = ""ALPHA"""
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLROOT		",ROOT,".] /TRANS=CONC"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLLIB		SSLROOT:['ARCH'_LIB]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLINCLUDE	SSLROOT:[INCLUDE]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLEXE		SSLROOT:['ARCH'_EXE]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLCERTS	SSLROOT:[CERTS]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLPRIVATE	SSLROOT:[PRIVATE]"
+$	WRITE SF "$!"
+$	WRITE SF "$ IF F$SEARCH(""SYS$STARTUP:SSL$DEFINE_ROOT.COM"") .NES."""" THEN -"
+$	WRITE SF "$	@SYS$STARTUP:SSL$DEFINE_ROOT.COM"
+$	WRITE SF "$!"
+$	WRITE SF "$!"
+$	WRITE SF "$	DEFINE/NOLOG/SYSTEM/EXEC	SSL$CERTS	SSL$ROOT:[CERTS]"
+$	WRITE SF "$	DEFINE/NOLOG/SYSTEM/EXEC	SSL$COM		SSL$ROOT:[COM]"
+$	WRITE SF "$	DEFINE/NOLOG/SYSTEM/EXEC	SSL$EXE		SSL$ROOT:['ARCH'_EXE]"
+$	WRITE SF "$	DEFINE/NOLOG/SYSTEM/EXEC	SSL$INCLUDE	SSL$ROOT:[INCLUDE]"
+$	WRITE SF "$	DEFINE/NOLOG/SYSTEM/EXEC	SSL$KEY		SSL$ROOT:[CERTS]"
+$	WRITE SF "$	DEFINE/NOLOG/SYSTEM/EXEC	SSL$PRIVATE	SSL$ROOT:[PRIVATE]"
 $	WRITE SF "$"
 $	WRITE SF "$!	This is program can include <openssl/{foo}.h>"
-$	WRITE SF "$	DEFINE/NOLOG'P1	OPENSSL		SSLINCLUDE:"
-$	WRITE SF "$"
-$	WRITE SF "$	IF F$SEARCH(""SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"") .NES."""" THEN -"
-$	WRITE SF "	   @SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
+$	WRITE SF "$	DEFINE/NOLOG/SYSTEM/EXEC	OPENSSL		SSL$INCLUDE:"
+$	WRITE SF "$!"
+$	WRITE SF "$	IF F$SEARCH(""SSL$COM:SSL$SYSTARTUP.COM"") .NES."""" THEN -"
+$	WRITE SF "	   @SSL$COM:SSL$SYSTARTUP.COM"
 $	WRITE SF "$"
 $	WRITE SF "$	EXIT"
 $	CLOSE SF
-$	SET FILE/PROT=WORLD:RE WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
-$
-$	COPY OPENSSL_UTILS.COM WRK_SSLROOT:[VMS]/LOG
-$	SET FILE/PROT=WORLD:RE WRK_SSLROOT:[VMS]OPENSSL_UTILS.COM
-$
+$	SET FILE/PROT=WORLD:RE WRK_SSLCOM:SSL$STARTUP.COM
+$!
+$	OPEN/WRITE SF WRK_SSLCOM:SSL$SHUTDOWN.COM
+$	WRITE SYS$OUTPUT "%OPEN-I-CREATED,  ",F$SEARCH("WRK_SSLCOM:SSL$SHUTDOWN.COM")," created."
+$	WRITE SF "$! Shutdown file for SSL"
+$	WRITE SF "$!"
+$	WRITE SF "$! Do not edit this file, as it will be regenerated during next installation."
+$	WRITE SF "$!"
+$	WRITE SF "$	ARCH = ""VAX"""
+$	WRITE SF "$	IF F$GETSYI(""CPU"") .GE. 128 THEN ARCH = ""ALPHA"""
+$	WRITE SF "$!"
+$	WRITE SF "$ IF F$SEARCH(""SSL$COM:SSL$SYSHUTDOWN.COM"") .NES."""" THEN -"
+$	WRITE SF "	@SSL$COM:SSL$SYSHUTDOWN.COM"
+$	WRITE SF "$!"
+$	WRITE SF "$ IF F$TRNLNM(""SSL$CERTS"") .NES."""" THEN -"
+$	WRITE SF "	DEASSIGN/SYSTEM/EXEC	SSL$CERTS"
+$!
+$	WRITE SF "$ IF F$TRNLNM(""SSL$COM"") .NES."""" THEN -"
+$	WRITE SF "	DEASSIGN/SYSTEM/EXEC	SSL$COM"
+$!
+$	WRITE SF "$ IF F$TRNLNM(""SSL$EXE"") .NES."""" THEN -"
+$	WRITE SF "	DEASSIGN/SYSTEM/EXEC	SSL$EXE"
+$!
+$	WRITE SF "$ IF F$TRNLNM(""SSL$INCLUDE"") .NES."""" THEN -"
+$	WRITE SF "	DEASSIGN/SYSTEM/EXEC	SSL$INCLUDE"
+$!
+$	WRITE SF "$ IF F$TRNLNM(""SSL$KEY"") .NES."""" THEN -"
+$	WRITE SF "	DEASSIGN/SYSTEM/EXEC	SSL$KEY"
+$!
+$	WRITE SF "$ IF F$TRNLNM(""SSL$PRIVATE"") .NES."""" THEN -"
+$	WRITE SF "	DEASSIGN/SYSTEM/EXEC	SSL$PRIVATE"
+$!
+$	WRITE SF "$!"
+$	WRITE SF "$ IF F$TRNLNM(""OPENSSL"") .NES."""" THEN -"
+$	WRITE SF "	DEASSIGN/SYSTEM/EXEC	OPENSSL"
+$	WRITE SF "$!"
+$	WRITE SF "$ IF F$TRNLNM(""SSL$ROOT"") .NES."""" THEN -"
+$	WRITE SF "	DEASSIGN/SYSTEM/EXEC SSL$ROOT"
+$	WRITE SF "$!"
+$	WRITE SF "$	EXIT"
+$	CLOSE SF
+$	SET FILE/PROT=WORLD:RE WRK_SSLCOM:SSL$SHUTDOWN.COM
+$!
+$	COPY SSL$UTILS.COM WRK_SSLCOM:/LOG
+$	SET FILE/PROT=WORLD:RE WRK_SSLCOM:SSL$UTILS.COM
+$!
+$	COPY SSL$SYSTARTUP.COM WRK_SSLCOM:/LOG
+$	SET FILE/PROT=WORLD:RE WRK_SSLCOM:SSL$SYSTARTUP.COM
+$	COPY SSL$SYSHUTDOWN.COM WRK_SSLCOM:/LOG
+$	SET FILE/PROT=WORLD:RE WRK_SSLCOM:SSL$SYSHUTDOWN.COM
+$!
+$	CERT_DIR := [.CERT_TOOL]
+$	CERT_FILES := SSL$AUTH_CERT.COM,SSL$AUTO_CERT.COM,SSL$CERT_TOOL.COM, -
+		      SSL$CONF_UTIL.COM,SSL$DRAW_BOX.COM,SSL$EXIT_CMD.TPU, -
+		      SSL$FILL_BOX.COM,SSL$HASH_CERT.COM,SSL$HOSTADDR.EXE, -
+		      SSL$HOSTNAME.EXE,SSL$INIT_ENV.COM,SSL$INIT_TERM.COM, -
+		      SSL$PICK_FILE.COM,SSL$RQST_CERT.COM,SSL$SELF_CERT.COM, -
+		      SSL$SHOW_FILE.COM,SSL$SIGN_CERT.COM,SSL$VIEW_CERT.COM, -
+		      SSL$REM_ENV.COM
+$!
+$	I = 0
+$ LOOP:
+$       CF = F$EDIT(F$ELEMENT(I, ",", CERT_FILES),"TRIM")
+$       I = I + 1
+$       IF CF .EQS. "," THEN GOTO LOOP_END
+$       SET NOON
+$       IF F$SEARCH(CERT_DIR+CF) .NES. ""
+$       THEN
+$         COPY 'CERT_DIR''CF' WRK_SSLCOM:*.*/log
+$         SET FILE/PROT=W:RE WRK_SSLCOM:'CF'
+$       ENDIF
+$       SET ON
+$       GOTO LOOP
+$ LOOP_END:
+$!
+$	SHOW SYSTEM/FULL/OUTPUT=WRK_SSLROOT:[PRIVATE]RANDFILE.
+$	SET FILE/PROT=WORLD:RE WRK_SSLROOT:[PRIVATE]RANDFILE.
+$!
+$	COPY SSL010.RELEASE_NOTES WRK_SSLROOT:[000000]/LOG
+$	SET FILE/PROT=WORLD:RE WRK_SSLROOT:[000000]SSL010.RELEASE_NOTES
+$!
 $	EXIT

VMS/mkshared.com

@@ -3,16 +3,94 @@ $!
 $! No command line parameters.  This should be run at the start of the source
 $! tree (the same directory where one finds INSTALL.VMS).
 $!
-$! Input:	[.UTIL]LIBEAY.NUM,[.AXP.EXE.CRYPTO]LIBCRYPTO.OLB
-$!		[.UTIL]SSLEAY.NUM,[.AXP.EXE.SSL]LIBSSL.OLB
-$! Output:	[.AXP.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
-$!		[.AXP.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
+$! Input:       [.UTIL]LIBEAY.NUM,[.AXP.EXE.CRYPTO]LIBCRYPTO.OLB
+$!              [.UTIL]SSLEAY.NUM,[.AXP.EXE.SSL]LIBSSL.OLB
+$! Output:      [.AXP.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
+$!              [.AXP.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
 $!
 $! So far, tests have only been made on VMS for Alpha.  VAX will come in time.
+$!
+$!
+$! >>>>>
+$!	Note: Since I don't know how to put a comment into one of the .NUM
+$!	      files, I will put the comment here and hope that it is found.
+$!
+$!	      For SSLEAY.NUM, we do not expose SSL_add_dir_cert_subjs_to_stk.
+$!	      We do not expose it because it is a truncated VMS name that
+$!	      points to (via SYMHACKS.H) SSL_add_dir_cert_subjects_to_stack.
+$!	      However, SSL_add_dir_cert_subjects_to_stack is #ifndef VMS
+$!	      out of SSL_CERT.C.  So, comment them all out and we won't get
+$!	      any link errors about undefined symbols.  This all works fine
+$!	      until we need this API's functionality. 
+$!
+$!	      For LIBEAY.NUM, 
+$!		ASN1_UTCTIME_GET  #if 0         [.CRYPTO.ASN1]A_UTCTM.C
+$!								[.CRYPTO.ASN1]ASN1.H
+$!
+$!		DES_SET_WEAK_KEY_FLAG           [.CRYPTO.DES]DES.H
+$!						Not used in any .C file.
+$!
+$!		DH_GET_DEFAULT_METHOD   Not found in any .C or .H file.
+$!		DH_SET_DEFAULT_METHOD   Not found in any .C or .H file.
+$!		DSA_GET_DEFAULT_METHOD  Not found in any .C or .H file.
+$!		DSA_SET_DEFAULT_METHOD  Not found in any .C or .H file.
+$!
+$!		PEM_READ_BIO_NETSCAPE_CERT_SEQUENCE     [.CRYPTO.PEM]PEM.H
+$!							[.CRYPTO]SYMHACKS.H
+$!							PEM_read_bio_NS_CERT_SEQ is not in any .C or .H file.
+$!
+$!		PEM_READ_BIO_PKCS8_PRIV_KEY_INFO        [.CRYPTO]SYMHACKS.H
+$!			#define PEM_read_bio_PKCS8_PRIV_KEY_INFO        PEM_read_bio_P8_PRIV_KEY_INFO
+$!			PEM_read_bio_P8_PRIV_KEY_INFO is not in any .C or .H file.
+$!
+$!		PEM_READ_NETSCAPE_CERT_SEQUENCE         [.CRYPTO.PEM]PEM.H
+$!							[.CRYPTO]SYMHACKS.H
+$!			#define PEM_read_NETSCAPE_CERT_SEQUENCE         PEM_read_NS_CERT_SEQ
+$!			PEM_read_NS_CERT_SEQ is not in any .C or .H file.
+$!
+$!		PEM_READ_PKCS8_PRIV_KEY_INFO            [.CRYPTO]SYMHACKS.H
+$!			#define PEM_read_PKCS8_PRIV_KEY_INFO            PEM_read_P8_PRIV_KEY_INFO
+$!			PEM_read_P8_PRIV_KEY_INFO is not in any .C or .H file.
+$!
+$!		PEM_WRITE_BIO_NETSCAPE_CERT_SEQUENCE    [.CRYPTO.PEM]PEM.H
+$!							[.CRYPTO]SYMHACKS.H
+$!			#define PEM_write_bio_NETSCAPE_CERT_SEQUENCE    PEM_write_bio_NS_CERT_SEQ
+$!			PEM_write_bio_NS_CERT_SEQ is not in any .C or .H file.
+$!
+$!		PEM_WRITE_BIO_PKCS8_PRIV_KEY_INFO       [.CRYPTO]SYMHACKS.H
+$!			#define PEM_write_bio_PKCS8_PRIV_KEY_INFO       PEM_write_bio_P8_PRIV_KEY_INFO
+$!			PEM_write_bio_P8_PRIV_KEY_INFO is not in any .C or .H file.
+$!
+$!		PEM_WRITE_NETSCAPE_CERT_SEQUENCE        [.CRYPTO.PEM]PEM.H
+$!							[.CRYPTO]SYMHACKS.H
+$!			#define PEM_write_NETSCAPE_CERT_SEQUENCE        PEM_write_NS_CERT_SEQ
+$!			PEM_write_NS_CERT_SEQ is not in any .C or .H file.
+$!
+$!		PEM_WRITE_PKCS8_PRIV_KEY_INFO           [.CRYPTO]SYMHACKS.H
+$!			#define PEM_write_PKCS8_PRIV_KEY_INFO           PEM_write_P8_PRIV_KEY_INFO
+$!			PEM_write_P8_PRIV_KEY_INFO is not in any .C or .H file.
+$!
+$!		RAND_EVENT                              [.CRYPTO.RAND]RAND.H RAND_event is #if windows || Win32
+$!							[.CRYPTO.RAND]RAND_WIN.C
+$!							All modules in RAND_WIN are WINDOWS or WIN32 modules.
+$!
+$!		RAND_SCREEN     if Windows or Win32 - [.CRYPTO.RAND]RAND.H
+$!
+$!		RSA_GET_DEFAULT_METHOD          is not in any .C or .H file.
+$!
+$!		RSA_SET_DEFAULT_METHOD           is not in any .C or .H file.
+$!
+$!
+$!
 $! ===========================================================================
-$
+$!
+$! Setup VMS specific information.
+$!
+$ @vms_build_info
+$!
 $! ----- Prepare info for processing: version number and file info
 $ gosub read_version_info
+$!
 $ if libver .eqs. ""
 $ then
 $   write sys$error "ERROR: Couldn't find any library version info..."
@@ -24,20 +102,31 @@ $ then
 $   libid  = "Crypto"
 $   libnum = "[.UTIL]LIBEAY.NUM"
 $   libdir = "[.AXP.EXE.CRYPTO]"
-$   libolb = "''libdir'LIBCRYPTO.OLB"
+$   libolb = "''libdir'LIBCRYPTO''build_bits'.OLB"
 $   libopt = "''libdir'LIBCRYPTO.OPT"
 $   libmap = "''libdir'LIBCRYPTO.MAP"
-$   libgoal= "''libdir'LIBCRYPTO.EXE"
+$   if build_bits .eqs. "32"
+$   then 
+$      libgoal= "''libdir'SSL$LIBCRYPTO_SHR''build_bits'.EXE"
+$   else
+$      libgoal= "''libdir'SSL$LIBCRYPTO_SHR.EXE"
+$   endif
 $   libref = ""
 $   gosub create_axp_shr
 $   libid  = "SSL"
 $   libnum = "[.UTIL]SSLEAY.NUM"
 $   libdir = "[.AXP.EXE.SSL]"
-$   libolb = "''libdir'LIBSSL.OLB"
+$   libolb = "''libdir'LIBSSL''build_bits'.OLB"
 $   libopt = "''libdir'LIBSSL.OPT"
 $   libmap = "''libdir'LIBSSL.MAP"
-$   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.AXP.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   if build_bits .eqs. "32"
+$   then 
+$      libgoal= "''libdir'SSL$LIBSSL_SHR''build_bits'.EXE"
+$      libref = "[.AXP.EXE.CRYPTO]SSL$LIBCRYPTO_SHR''build_bits'.EXE"
+$   else
+$      libgoal= "''libdir'SSL$LIBSSL_SHR.EXE"
+$      libref = "[.AXP.EXE.CRYPTO]SSL$LIBCRYPTO_SHR.EXE"
+$   endif
 $   gosub create_axp_shr
 $ else
 $   libtit = "CRYPTO_TRANSFER_VECTOR"
@@ -45,11 +134,16 @@ $   libid  = "Crypto"
 $   libnum = "[.UTIL]LIBEAY.NUM"
 $   libdir = "[.VAX.EXE.CRYPTO]"
 $   libmar = "''libdir'LIBCRYPTO.MAR"
-$   libolb = "''libdir'LIBCRYPTO.OLB"
+$   libolb = "''libdir'LIBCRYPTO''build_bits.OLB"
 $   libopt = "''libdir'LIBCRYPTO.OPT"
 $   libobj = "''libdir'LIBCRYPTO.OBJ"
 $   libmap = "''libdir'LIBCRYPTO.MAP"
-$   libgoal= "''libdir'LIBCRYPTO.EXE"
+$   if build_bits .eqs. "32"
+$   then
+$      libgoal= "''libdir'SSL$LIBCRYPTO_SHR''build_bits'.EXE"
+$   else
+$      libgoal= "''libdir'SSL$LIBCRYPTO_SHR.EXE"
+$   endif
 $   libref = ""
 $   libvec = "LIBCRYPTO"
 $   gosub create_vax_shr
@@ -58,12 +152,18 @@ $   libid  = "SSL"
 $   libnum = "[.UTIL]SSLEAY.NUM"
 $   libdir = "[.VAX.EXE.SSL]"
 $   libmar = "''libdir'LIBSSL.MAR"
-$   libolb = "''libdir'LIBSSL.OLB"
+$   libolb = "''libdir'LIBSSL''build_bits'.OLB"
 $   libopt = "''libdir'LIBSSL.OPT"
 $   libobj = "''libdir'LIBSSL.OBJ"
 $   libmap = "''libdir'LIBSSL.MAP"
-$   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.VAX.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   if build_bits .eqs. "32"
+$   then
+$      libgoal= "''libdir'SSL$LIBSSL_SHR''build_bits'.EXE"
+$      libref = "[.VAX.EXE.CRYPTO]SSL$LIBCRYPTO_SHR''build_bits'.EXE"
+$   else
+$      libgoal= "''libdir'SSL$LIBSSL_SHR.EXE"
+$      libref = "[.VAX.EXE.CRYPTO]SSL$LIBCRYPTO_SHR.EXE"
+$   endif
 $   libvec = "LIBSSL"
 $   gosub create_vax_shr
 $ endif
@@ -83,18 +183,18 @@ $! in the .num file, check that each line applies to VMS and the architecture,
 $! and to fill in "holes" with dummy entries.
 $!
 $! The creator routines depend on the following variables:
-$! libnum	The name of the .num file to use as input
-$! libolb	The name of the object library to build from
-$! libid	The identification string of the shareable library
-$! libopt	The name of the .opt file to write
-$! libtit	The title of the assembler transfer vector file (VAX only)
-$! libmar	The name of the assembler transfer vector file (VAX only)
-$! libmap	The name of the map file to write
-$! libgoal	The name of the shareable library to write
-$! libref	The name of a shareable library to link in
+$! libnum       The name of the .num file to use as input
+$! libolb       The name of the object library to build from
+$! libid        The identification string of the shareable library
+$! libopt       The name of the .opt file to write
+$! libtit       The title of the assembler transfer vector file (VAX only)
+$! libmar       The name of the assembler transfer vector file (VAX only)
+$! libmap       The name of the map file to write
+$! libgoal      The name of the shareable library to write
+$! libref       The name of a shareable library to link in
 $!
 $! read_func_num depends on the following variables from the creator:
-$! libwriter	The name of the writer routine to call for each .num file line
+$! libwriter    The name of the writer routine to call for each .num file line
 $! -----
 $
 $! ----- Subroutines for AXP
@@ -103,6 +203,7 @@ $! The creator routine
 $ create_axp_shr:
 $   open/write opt 'libopt'
 $   write opt "identification=""",libid," ",libverstr,""""
+$   write opt "build_ident=""",build_ident,"_",build_platform,"_",build_bits,""" "
 $   write opt libolb,"/lib"
 $   if libref .nes. "" then write opt libref,"/SHARE"
 $   write opt "SYMBOL_VECTOR=(-"
@@ -137,14 +238,16 @@ $   endif
 $   if libfirstentry
 $   then
 $     write 'libwrch' "    ",libentry,"=",pr," -"
+$!DEBUG!$     write sys$output "''libentry' = ''pr' #1"
 $   else
 $     write 'libwrch' "    ,",libentry,"=",pr," -"
+$!DEBUG!$     write sys$output ",''libentry' = ''pr'"
 $   endif
 $   libfirstentry := false
 $   textcount = textcount + textcount_this
 $   return
 $
-$! ----- Subroutines for AXP
+$! ----- Subroutines for VAX
 $! -----
 $! The creator routine
 $ create_vax_shr:
@@ -153,23 +256,23 @@ $   type sys$input:/out=mar:
 ;
 ; Transfer vector for VAX shareable image
 ;
-$   write mar "	.TITLE ",libtit
-$   write mar "	.IDENT /",libid,"/"
+$   write mar " .TITLE ",libtit
+$   write mar " .IDENT /",libid,"/"
 $   type sys$input:/out=mar:
 ;
 ; Define macro to assist in building transfer vector entries.  Each entry
 ; should take no more than 8 bytes.
 ;
-	.MACRO FTRANSFER_ENTRY routine
-	.ALIGN QUAD
-	.TRANSFER routine
-	.MASK	routine
-	JMP	routine+2
-	.ENDM FTRANSFER_ENTRY
+        .MACRO FTRANSFER_ENTRY routine
+        .ALIGN QUAD
+        .TRANSFER routine
+        .MASK   routine
+        JMP     routine+2
+        .ENDM TRANSFER_ENTRY
 ;
 ; Place entries in own program section.
 ;
-$   write mar "	.PSECT $$",libvec,",QUAD,PIC,USR,CON,REL,LCL,SHR,EXE,RD,NOWRT"
+$   write mar " .PSECT $$",libvec,"QUAD,PIC,USR,CON,REL,LCL,SHR,EXE,RD,NOWRT"
 $   write mar libvec,"_xfer:"
 $   libwrch   := mar
 $   libwriter := write_vax_ftransfer_entry
@@ -178,10 +281,10 @@ $   type sys$input:/out=mar:
 ;
 ; Allocate extra storage at end of vector to allow for expansion.
 ;
-$   write mar "	.BLKB 32768-<.-",libvec,"_xfer>	; 64 pages total."
-$!   libwriter := write_vax_vtransfer_entry
-$!   gosub read_func_num
-$   write mar "	.END"
+$   write mar " .BLKB 32768-<.-",libvec,"_xfer> ; 64 pages total."
+$   libwriter := write_vax_vtransfer_entry
+$   gosub read_func_num
+$   write mar " .END"
 $   close mar
 $   open/write opt 'libopt'
 $   write opt "identification=""",libid," ",libverstr,""""
@@ -202,7 +305,7 @@ $   type sys$input:/out=opt:
 PSECT_ATTR=$CHAR_STRING_CONSTANTS,NOWRT
 $   libwrch   := opt
 $   libwriter := write_vax_psect_attr
-$   gosub read_func_num
+$   gosub read_var_num
 $   close opt
 $   macro/obj='libobj' 'libmar'
 $   link/map='libmap'/full/share='libgoal' 'libopt'/option
@@ -213,9 +316,9 @@ $ write_vax_ftransfer_entry:
 $   if info_kind .nes. "FUNCTION" then return
 $   if libentry .eqs ".dummy"
 $   then
-$     write 'libwrch' "	.BLKB 8" ! Dummy is zeroes...
+$     write 'libwrch' " .BLKB 8" ! Dummy is zeroes...
 $   else
-$     write 'libwrch' "	FTRANSFER_ENTRY ",libentry
+$     write 'libwrch' " FTRANSFER_ENTRY ",libentry
 $   endif
 $   return
 $! The record writer routine for VAX variables (should never happen!)
@@ -245,6 +348,16 @@ $     info_exist=f$element(0,":",entryinfo)
 $     info_platforms=","+f$element(1,":",entryinfo)+","
 $     info_kind=f$element(2,":",entryinfo)
 $     info_algorithms=","+f$element(3,":",entryinfo)+","
+$!
+$!DEBUG!$ write sys$output " Processing ... ", line
+$!DEBUG!$ write sys$output "Entry num = ",entrynum
+$!DEBUG!$ write sys$output "Entry info = ",entryinfo
+$!DEBUG!$ write sys$output "Cur Entry = ",curentry
+$!DEBUG!$ write sys$output "info exist = ",info_exist
+$!DEBUG!$ write sys$output "info platforms = ",info_platforms
+$!DEBUG!$ write sys$output "info kind = ",info_kind
+$!DEBUG!$ write sys$output "info algs = ",info_algorithms
+$!
 $     if info_exist .eqs. "NOEXIST" then goto loop
 $     truesum = 0
 $     falsesum = 0
@@ -252,10 +365,15 @@ $     negatives = 1
 $     plat_i = 0
 $     loop1:
 $       plat_entry = f$element(plat_i,",",info_platforms)
+$!DEBUG!$ write sys$output "plat entry = ",plat_entry
+$! 
 $       plat_i = plat_i + 1
+$!DEBUG!$ write sys$output "plat i = ", plat_i
 $       if plat_entry .eqs. "" then goto loop1
-$       if plat_entry .nes. ","
+$       if plat_entry .eqs. ","
 $       then
+$	  goto endloop1
+$       else
 $         if f$extract(0,1,plat_entry) .nes. "!" then negatives = 0
 $         if f$getsyi("CPU") .lt. 128
 $         then
@@ -264,30 +382,48 @@ $             truesum = truesum + 1
 $           if plat_entry .eqs. "!EXPORT_VAR_AS_FUNCTION" then -
 $             falsesum = falsesum + 1
 $         endif
-$         if plat_entry .eqs. "VMS" then truesum = truesum + 1
-$         if plat_entry .eqs. "!VMS" then falsesum = falsesum + 1
-$	  goto loop1
+$         if plat_entry .eqs. "VMS" 
+$	  then 
+$		truesum = truesum + 1
+$!DEBUG!$		write sys$output "plat_entry = VMS"
+$         endif
+$!
+$         if plat_entry .eqs. "!VMS" 
+$	  then 
+$		falsesum = falsesum + 1
+$!DEBUG!$		write sys$output "plat_entry <> VMS"
+$         endif
 $       endif
+$       goto loop1
+$! 
 $     endloop1:
 $!DEBUG!$     if info_platforms - "EXPORT_VAR_AS_FUNCTION" .nes. info_platforms
 $!DEBUG!$     then
 $!DEBUG!$       write sys$output line
 $!DEBUG!$       write sys$output "        truesum = ",truesum,-
-$!DEBUG!		", negatives = ",negatives,", falsesum = ",falsesum
+$!DEBUG!                ", negatives = ",negatives,", falsesum = ",falsesum
 $!DEBUG!$     endif
 $     if falsesum .ne. 0 then goto loop
-$     if truesum+negatives .eq. 0 then goto loop
+$     if truesum+negatives .eq. 0 
+$     then
+$!DEBUG!$	write sys$output "truesum+negatives .eq. 0. Going to loop." 
+$	goto loop
+$     endif
 $     alg_i = 0
 $     loop2:
 $       alg_entry = f$element(alg_i,",",info_algorithms)
-$	alg_i = alg_i + 1
+$!DEBUG!$ write sys$output "alg entry = ",alg_entry
+$       alg_i = alg_i + 1
 $       if alg_entry .eqs. "" then goto loop2
-$       if alg_entry .nes. ","
+$       if alg_entry .eqs. ","
 $       then
+$	  goto endloop2
+$       else
 $         if alg_entry .eqs. "KRB5" then goto loop ! Special for now
 $         if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
-$	  goto loop2
 $       endif
+$	goto loop2
+$!
 $     endloop2:
 $     if info_platforms - "EXPORT_VAR_AS_FUNCTION" .nes. info_platforms
 $     then
@@ -323,15 +459,16 @@ $     goto 'next'
 $   loop_end:
 $   close libnum
 $   return
-$
+$!
 $! The version number reader
-$ read_version_info:
+$!
+$read_version_info:
 $   libver = ""
 $   open/read vf [.CRYPTO]OPENSSLV.H
 $   loop_rvi:
 $     read/err=endloop_rvi/end=endloop_rvi vf rvi_line
 $     if rvi_line - "SHLIB_VERSION_NUMBER """ .eqs. rvi_line then -
-	goto loop_rvi
+        goto loop_rvi
 $     libverstr = f$element(1,"""",rvi_line)
 $     libvmajor = f$element(0,".",libverstr)
 $     libvminor = f$element(1,".",libverstr)
@@ -339,7 +476,7 @@ $     libvedit = f$element(2,".",libverstr)
 $     libvpatch = f$cvui(0,8,f$extract(1,1,libvedit)+"@")-f$cvui(0,8,"@")
 $     libvedit = f$extract(0,1,libvedit)
 $     libver = f$string(f$int(libvmajor)*100)+","+-
-	f$string(f$int(libvminor)*100+f$int(libvedit)*10+f$int(libvpatch))
+        f$string(f$int(libvminor)*100+f$int(libvedit)*10+f$int(libvpatch))
 $     if libvmajor .eqs. "0"
 $     then
 $       libvmatch = "EQUAL"

VMS/ssl$syshutdown.com

@@ -0,0 +1,8 @@
+$!
+$! SSL$SYSHUTDOWN.COM - This command procedure is used for site specific SSL
+$!			shutdown tasks.  Anything setup in SSL$SYSTARTUP.COM
+$!			should be cleaned up in this command procedure.
+$!
+$ DEASSIGN/SYSTEM/EXEC  RANDFILE
+$ DEASSIGN/SYSTEM/EXEC  SSL$RANDFILE
+$!

VMS/ssl$systartup.com

@@ -0,0 +1,7 @@
+$!
+$!
+$!  Add logical to aid random number generators.  --  http://www.free.lp.se/openssl/docs/openssl3.html#ss3.1
+$!
+$ DEFINE/SYSTEM/EXEC  RANDFILE		SSL$ROOT:[PRIVATE]RANDFILE.;
+$ DEFINE/SYSTEM/EXEC  SSL$RANDFILE	SSL$ROOT:[PRIVATE]RANDFILE.;
+$!

VMS/ssl$utils.com

@@ -0,0 +1,76 @@
+$!
+$!  APPS.COM
+$!  Written By:  Robert Byer
+$!               Vice-President
+$!               A-Com Computing, Inc.
+$!               byer@mail.all-net.net
+$!
+$!
+$! Slightly modified by Richard Levitte <richard@levitte.org>
+$!
+$ IF P1 .NES. "" THEN GOTO 'P1
+$!
+$DEFINE:
+$!
+$ OPENSSL  :== $SSL$EXE:OPENSSL
+$ VERIFY   :== $SSL$EXE:OPENSSL VERIFY
+$ ASN1PARSE:== $SSL$EXE:OPENSSL ASN1PARS
+$ REQ      :== $SSL$EXE:OPENSSL REQ
+$ DGST     :== $SSL$EXE:OPENSSL DGST
+$ DH       :== $SSL$EXE:OPENSSL DH
+$ ENC      :== $SSL$EXE:OPENSSL ENC
+$ GENDH    :== $SSL$EXE:OPENSSL GENDH
+$ ERRSTR   :== $SSL$EXE:OPENSSL ERRSTR
+$ CA       :== $SSL$EXE:OPENSSL CA
+$ CRL      :== $SSL$EXE:OPENSSL CRL
+$ RSA      :== $SSL$EXE:OPENSSL RSA
+$ DSA      :== $SSL$EXE:OPENSSL DSA
+$ DSAPARAM :== $SSL$EXE:OPENSSL DSAPARAM
+$ X509     :== $SSL$EXE:OPENSSL X509
+$ GENRSA   :== $SSL$EXE:OPENSSL GENRSA
+$ GENDSA   :== $SSL$EXE:OPENSSL GENDSA
+$ S_SERVER :== $SSL$EXE:OPENSSL S_SERVER
+$ S_CLIENT :== $SSL$EXE:OPENSSL S_CLIENT
+$ SPEED    :== $SSL$EXE:OPENSSL SPEED
+$ S_TIME   :== $SSL$EXE:OPENSSL S_TIME
+$ VERSION  :== $SSL$EXE:OPENSSL VERSION
+$ PKCS7    :== $SSL$EXE:OPENSSL PKCS7
+$ CRL2PKCS7:== $SSL$EXE:OPENSSL CRL2P7
+$ SESS_ID  :== $SSL$EXE:OPENSSL SESS_ID
+$ CIPHERS  :== $SSL$EXE:OPENSSL CIPHERS
+$ NSEQ     :== $SSL$EXE:OPENSSL NSEQ
+$ PKCS12   :== $SSL$EXE:OPENSSL PKCS12
+$!
+$EXIT
+$!
+$REMOVE:
+$ DELETE/SYMBOL/GLOBAL OPENSSL
+$ DELETE/SYMBOL/GLOBAL VERIFY
+$ DELETE/SYMBOL/GLOBAL ASN1PARSE
+$ DELETE/SYMBOL/GLOBAL REQ
+$ DELETE/SYMBOL/GLOBAL DGST
+$ DELETE/SYMBOL/GLOBAL DH
+$ DELETE/SYMBOL/GLOBAL ENC
+$ DELETE/SYMBOL/GLOBAL GENDH
+$ DELETE/SYMBOL/GLOBAL ERRSTR
+$ DELETE/SYMBOL/GLOBAL CA
+$ DELETE/SYMBOL/GLOBAL CRL
+$ DELETE/SYMBOL/GLOBAL RSA
+$ DELETE/SYMBOL/GLOBAL DSA
+$ DELETE/SYMBOL/GLOBAL DSAPARAM
+$ DELETE/SYMBOL/GLOBAL X509
+$ DELETE/SYMBOL/GLOBAL GENRSA
+$ DELETE/SYMBOL/GLOBAL GENDSA
+$ DELETE/SYMBOL/GLOBAL S_SERVER
+$ DELETE/SYMBOL/GLOBAL S_CLIENT
+$ DELETE/SYMBOL/GLOBAL SPEED
+$ DELETE/SYMBOL/GLOBAL S_TIME
+$ DELETE/SYMBOL/GLOBAL VERSION
+$ DELETE/SYMBOL/GLOBAL PKCS7
+$ DELETE/SYMBOL/GLOBAL CRL2PKCS7
+$ DELETE/SYMBOL/GLOBAL SESS_ID
+$ DELETE/SYMBOL/GLOBAL CIPHERS
+$ DELETE/SYMBOL/GLOBAL NSEQ
+$ DELETE/SYMBOL/GLOBAL PKCS12
+$!
+$EXIT

VMS/ssl010.release_notes

@@ -0,0 +1,25 @@
+
+      Compaq SSL for OpenVMS Alpha
+
+      Field Test Release Notes
+
+      February 2002
+
+      Based on OpenSSL 0.9.6B
+
+      Compaq SSL T1.0 for OpenVMS Alpha
+      CPQ-AXPVMS-SSL-T0100--1.PCSI-DCX-AXPEXE
+
+      ----------------------------------------------
+
+      Compaq is pleased to provide you with the first release of Compaq
+      SSL for OpenVMS Alpha.  Compaq SSL (Secure Sockets Layer)
+      is based on the 0.9.6B release from the Open Group.  See
+      http://www.openssl.org for more information about OpenSSL.
+
+      Documentation for this kit, including installation and configuration
+      information, release notes, a programming tutorial and API reference,
+      is included in "Open Source Security for OpenVMS Alpha
+      Volume 2: SSL" in HTML, PDF, and PostScript format. This document
+      is included on the OpenVMS field test documentation CD-ROM.
+

VMS/tcpip_shr_decc.opt

@@ -0,0 +1 @@
+sys$share:tcpip$ipc_shr.exe/share

apps/apps.c

@@ -147,7 +147,7 @@ static UI_METHOD *ui_method = NULL;
 static int set_table_opts(unsigned long *flags, const char *arg, const NAME_EX_TBL *in_tbl);
 static int set_multi_opts(unsigned long *flags, const char *arg, const NAME_EX_TBL *in_tbl);
 
-#ifndef OPENSSL_NO_RC4
+#if !defined(OPENSSL_NO_RC4) && !defined(OPENSSL_NO_RSA)
 /* Looks like this stuff is worth moving into separate function */
 static EVP_PKEY *
 load_netscape_key(BIO *err, BIO *key, const char *file,
@@ -333,16 +333,13 @@ void program_name(char *in, char *out, int size)
 #ifdef OPENSSL_SYS_WIN32
 int WIN32_rename(char *from, char *to)
 	{
-#ifdef OPENSSL_SYS_WINNT
-	int ret;
-/* Note: MoveFileEx() doesn't work under Win95, Win98 */
-
-	ret=MoveFileEx(from,to,MOVEFILE_REPLACE_EXISTING|MOVEFILE_COPY_ALLOWED);
-	return(ret?0:-1);
-#else
-	unlink(to);
-	return MoveFile(from, to);
-#endif
+	/* Windows rename gives an error if 'to' exists, so delete it
+	 * first and ignore file not found errror
+	 */
+	if((remove(to) != 0) && (errno != ENOENT))
+		return -1;
+#undef rename
+	return rename(from, to);
 	}
 #endif
 
@@ -835,7 +832,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format,
 		pkey=PEM_read_bio_PrivateKey(key,NULL,
 			(pem_password_cb *)password_callback, &cb_data);
 		}
-#ifndef OPENSSL_NO_RC4
+#if !defined(OPENSSL_NO_RC4) && !defined(OPENSSL_NO_RSA)
 	else if (format == FORMAT_NETSCAPE || format == FORMAT_IISSGC)
 		pkey = load_netscape_key(err, key, file, key_descrip, format);
 #endif
@@ -904,7 +901,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
 		pkey=PEM_read_bio_PUBKEY(key,NULL,
 			(pem_password_cb *)password_callback, &cb_data);
 		}
-#ifndef OPENSSL_NO_RC4
+#if !defined(OPENSSL_NO_RC4) && !defined(OPENSSL_NO_RSA)
 	else if (format == FORMAT_NETSCAPE || format == FORMAT_IISSGC)
 		pkey = load_netscape_key(err, key, file, key_descrip, format);
 #endif
@@ -920,7 +917,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
 	return(pkey);
 	}
 
-#ifndef OPENSSL_NO_RC4
+#if !defined(OPENSSL_NO_RC4) && !defined(OPENSSL_NO_RSA)
 EVP_PKEY *
 load_netscape_key(BIO *err, BIO *key, const char *file,
 		const char *key_descrip, int format)
@@ -1314,3 +1311,21 @@ ENGINE *setup_engine(BIO *err, const char *engine, int debug)
 		}
         return e;
         }
+
+int load_config(BIO *err, CONF *cnf)
+	{
+	if (!cnf)
+		cnf = config;
+	if (!cnf)
+		return 1;
+
+	OPENSSL_load_builtin_modules();
+
+	if (CONF_modules_load(cnf, NULL, 0) <= 0)
+		{
+		BIO_printf(err, "Error configuring OpenSSL\n");
+		ERR_print_errors(err);
+		return 0;
+		}
+	return 1;
+	}

apps/apps.h

@@ -121,6 +121,7 @@
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
 #include <openssl/txt_db.h>
+#include <openssl/engine.h>
 #include <openssl/ossl_typ.h>
 
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -194,9 +195,10 @@ extern BIO *bio_err;
 		setup_ui_method(); } while(0)
 #  endif
 #  define apps_shutdown() \
-		do { destroy_ui_method(); EVP_cleanup(); \
-		ENGINE_cleanup(); CRYPTO_cleanup_all_ex_data(); \
-		ERR_remove_state(0); ERR_free_strings(); } while(0)
+		do { CONF_modules_unload(1); destroy_ui_method(); \
+		EVP_cleanup(); ENGINE_cleanup(); \
+		CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+		ERR_free_strings(); } while(0)
 #endif
 
 typedef struct args_st
@@ -244,11 +246,15 @@ STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
 
+int load_config(BIO *err, CONF *cnf);
+
 /* Functions defined in ca.c and also used in ocsp.c */
 int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
 			ASN1_GENERALIZEDTIME **pinvtm, char *str);
 int make_serial_index(TXT_DB *db);
 
+X509_NAME *do_subject(char *str, long chtype);
+
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
 #define FORMAT_TEXT     2

apps/asn1pars.c

@@ -103,6 +103,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	prog=argv[0];
 	argc--;
 	argv++;

apps/ca.c

@@ -238,7 +238,6 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
        	int verbose, X509_REQ *req, char *ext_sect, CONF *conf,
 	unsigned long certopt, unsigned long nameopt, int default_op,
 	int ext_copy);
-static X509_NAME *do_subject(char *subject);
 static int do_revoke(X509 *x509, TXT_DB *db, int ext, char *extval);
 static int get_certificate_status(const char *ser_status, TXT_DB *db);
 static int do_updatedb(TXT_DB *db);
@@ -571,6 +570,7 @@ bad:
 #else
 		strncpy(buf[0],X509_get_default_cert_area(),
 			sizeof(buf[0])-2-sizeof(CONFIG_FILE));
+		buf[0][sizeof(buf[0])-2-sizeof(CONFIG_FILE)]='\0';
 		strcat(buf[0],"/");
 #endif
 		strcat(buf[0],CONFIG_FILE);
@@ -590,6 +590,9 @@ bad:
 		goto err;
 		}
 
+	if (!load_config(bio_err, conf))
+		goto err;
+
 	/* Lets get the config section we are using */
 	if (section == NULL)
 		{
@@ -1274,6 +1277,7 @@ bad:
 			BIO_printf(bio_err,"Write out database with %d new entries\n",sk_X509_num(cert_sk));
 
 			strncpy(buf[0],serialfile,BSIZE-4);
+			buf[0][BSIZE-4]='\0';
 
 #ifdef OPENSSL_SYS_VMS
 			strcat(buf[0],"-new");
@@ -1284,6 +1288,7 @@ bad:
 			if (!save_serial(buf[0],serial)) goto err;
 
 			strncpy(buf[1],dbfile,BSIZE-4);
+			buf[1][BSIZE-4]='\0';
 
 #ifdef OPENSSL_SYS_VMS
 			strcat(buf[1],"-new");
@@ -1314,6 +1319,7 @@ bad:
 			p=(char *)x->cert_info->serialNumber->data;
 			
 			strncpy(buf[2],outdir,BSIZE-(j*2)-6);
+			buf[2][BSIZE-(j*2)-6]='\0';
 
 #ifndef OPENSSL_SYS_VMS
 			strcat(buf[2],"/");
@@ -1351,6 +1357,7 @@ bad:
 			{
 			/* Rename the database and the serial file */
 			strncpy(buf[2],serialfile,BSIZE-4);
+			buf[2][BSIZE-4]='\0';
 
 #ifdef OPENSSL_SYS_VMS
 			strcat(buf[2],"-old");
@@ -1379,6 +1386,7 @@ bad:
 				}
 
 			strncpy(buf[2],dbfile,BSIZE-4);
+			buf[2][BSIZE-4]='\0';
 
 #ifdef OPENSSL_SYS_VMS
 			strcat(buf[2],"-old");
@@ -1551,6 +1559,7 @@ bad:
 			X509_free(revcert);
 
 			strncpy(buf[0],dbfile,BSIZE-4);
+			buf[0][BSIZE-4]='\0';
 #ifndef OPENSSL_SYS_VMS
 			strcat(buf[0],".new");
 #else
@@ -1565,11 +1574,16 @@ bad:
 			j=TXT_DB_write(out,db);
 			if (j <= 0) goto err;
 			strncpy(buf[1],dbfile,BSIZE-4);
+			buf[1][BSIZE-4]='\0';
 #ifndef OPENSSL_SYS_VMS
 			strcat(buf[1],".old");
 #else
 			strcat(buf[1],"-old");
 #endif
+			BIO_free(in);
+			in = NULL;
+			BIO_free(out);
+			out = NULL;
 			if (rename(dbfile,buf[1]) < 0)
 				{
 				BIO_printf(bio_err,"unable to rename %s to %s\n", dbfile, buf[1]);
@@ -1864,7 +1878,7 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 
 	if (subj)
 		{
-		X509_NAME *n = do_subject(subj);
+		X509_NAME *n = do_subject(subj, MBSTRING_ASC);
 
 		if (!n)
 			{
@@ -3008,65 +3022,124 @@ int make_revoked(X509_REVOKED *rev, char *str)
 	return ret;
 	}
 
-static X509_NAME *do_subject(char *subject)
+/*
+ * subject is expected to be in the format /type0=value0/type1=value1/type2=...
+ * where characters may be escaped by \
+ */
+X509_NAME *do_subject(char *subject, long chtype)
 	{
+	size_t buflen = strlen(subject)+1; /* to copy the types and values into. due to escaping, the copy can only become shorter */
+	char *buf = OPENSSL_malloc(buflen);
+	size_t max_ne = buflen / 2 + 1; /* maximum number of name elements */
+	char **ne_types = OPENSSL_malloc(max_ne * sizeof (char *));
+	char **ne_values = OPENSSL_malloc(max_ne * sizeof (char *));
+
+	char *sp = subject, *bp = buf;
+	int i, ne_num = 0;
+
 	X509_NAME *n = NULL;
+	int nid;
 
-	int i, nid, ne_num=0;
+	if (!buf || !ne_types || !ne_values)
+	{
+		BIO_printf(bio_err, "malloc error\n");
+		goto error;
+	}
 
-	char *ne_name = NULL;
-	char *ne_value = NULL;
+	if (*subject != '/')
+	{
+		BIO_printf(bio_err, "Subject does not start with '/'.\n");
+		goto error;
+	}
+	sp++; /* skip leading / */
 
-	char *tmp = NULL;
-	char *p[2];
-
-	char *str_list[256];
-       
-	p[0] = ",/";
-	p[1] = "=";
-
-	n = X509_NAME_new();
-
-	tmp = strtok(subject, p[0]);
-	while((tmp != NULL) && (ne_num < (sizeof str_list/sizeof *str_list)))
+	while (*sp)
+	{
+		/* collect type */
+		ne_types[ne_num] = bp;
+		while (*sp)
 		{
-		char *token = tmp;
-
-		while (token[0] == ' ')
-			token++;
-		str_list[ne_num] = token;
-
-		tmp = strtok(NULL, p[0]);
-		ne_num++;
+			if (*sp == '\\') /* is there anything to escape in the type...? */
+				if (*++sp)
+					*bp++ = *sp++;
+				else
+				{
+					BIO_printf(bio_err, "escape character at end of string\n");
+					goto error;
+				}
+			else if (*sp == '=')
+			{
+				sp++;
+				*bp++ = '\0';
+				break;
+			}
+			else
+				*bp++ = *sp++;
 		}
+		if (!*sp)
+		{
+			BIO_printf(bio_err, "end of string encountered while processing type of subject name element #%d\n", ne_num);
+			goto error;
+		}
+		ne_values[ne_num] = bp;
+		while (*sp)
+		{
+			if (*sp == '\\')
+				if (*++sp)
+					*bp++ = *sp++;
+				else
+				{
+					BIO_printf(bio_err, "escape character at end of string\n");
+					goto error;
+				}
+			else if (*sp == '/')
+			{
+				sp++;
+				break;
+			}
+			else
+				*bp++ = *sp++;
+		}
+		*bp++ = '\0';
+		ne_num++;
+	}
+
+	if (!(n = X509_NAME_new()))
+		goto error;
 
 	for (i = 0; i < ne_num; i++)
 		{
-		ne_name  = strtok(str_list[i], p[1]);
-		ne_value = strtok(NULL, p[1]);
-
-		if ((nid=OBJ_txt2nid(ne_name)) == NID_undef)
+		if ((nid=OBJ_txt2nid(ne_types[i])) == NID_undef)
 			{
-			BIO_printf(bio_err, "Subject Attribute %s has no known NID, skipped\n", ne_name);
+			BIO_printf(bio_err, "Subject Attribute %s has no known NID, skipped\n", ne_types[i]);
 			continue;
 			}
 
-		if (ne_value == NULL)
+		if (!*ne_values[i])
 			{
-			BIO_printf(bio_err, "No value provided for Subject Attribute %s, skipped\n", ne_name);
+			BIO_printf(bio_err, "No value provided for Subject Attribute %s, skipped\n", ne_types[i]);
 			continue;
 			}
 
-		if (!X509_NAME_add_entry_by_NID(n, nid, MBSTRING_ASC, (unsigned char*)ne_value, -1,-1,0))
-			{
-			X509_NAME_free(n);
-			return NULL;
-			}
+		if (!X509_NAME_add_entry_by_NID(n, nid, chtype, (unsigned char*)ne_values[i], -1,-1,0))
+			goto error;
 		}
 
+	OPENSSL_free(ne_values);
+	OPENSSL_free(ne_types);
+	OPENSSL_free(buf);
 	return n;
-	}
 
+error:
+	X509_NAME_free(n);
+	if (ne_values)
+		OPENSSL_free(ne_values);
+	if (ne_types)
+		OPENSSL_free(ne_types);
+	if (buf)
+		OPENSSL_free(buf);
+	return NULL;
+}
 
 int old_entry_print(BIO *bp, ASN1_OBJECT *obj, ASN1_STRING *str)
 	{

apps/crl.c

@@ -87,6 +87,7 @@ static char *crl_usage[]={
 " -noout          - no CRL output\n",
 " -CAfile  name   - verify CRL using certificates in file \"name\"\n",
 " -CApath  dir    - verify CRL using certificates in \"dir\"\n",
+" -nameopt arg    - various certificate name options\n",
 NULL
 };
 
@@ -97,6 +98,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	unsigned long nmflag = 0;
 	X509_CRL *x=NULL;
 	char *CAfile = NULL, *CApath = NULL;
 	int ret=1,i,num,badops=0;
@@ -105,7 +107,7 @@ int MAIN(int argc, char **argv)
 	char *infile=NULL,*outfile=NULL;
 	int hash=0,issuer=0,lastupdate=0,nextupdate=0,noout=0,text=0;
 	int fingerprint = 0;
-	char **pp,buf[256];
+	char **pp;
 	X509_STORE *store = NULL;
 	X509_STORE_CTX ctx;
 	X509_LOOKUP *lookup = NULL;
@@ -120,6 +122,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	if (bio_out == NULL)
 		if ((bio_out=BIO_new(BIO_s_file())) != NULL)
 			{
@@ -185,6 +190,11 @@ int MAIN(int argc, char **argv)
 			text = 1;
 		else if (strcmp(*argv,"-hash") == 0)
 			hash= ++num;
+		else if (strcmp(*argv,"-nameopt") == 0)
+			{
+			if (--argc < 1) goto bad;
+			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
+			}
 		else if (strcmp(*argv,"-issuer") == 0)
 			issuer= ++num;
 		else if (strcmp(*argv,"-lastupdate") == 0)
@@ -268,9 +278,7 @@ bad:
 			{
 			if (issuer == i)
 				{
-				X509_NAME_oneline(X509_CRL_get_issuer(x),
-								buf,256);
-				BIO_printf(bio_out,"issuer= %s\n",buf);
+				print_name(bio_out, "issuer=", X509_CRL_get_issuer(x), nmflag);
 				}
 
 			if (hash == i)

apps/dgst.c

@@ -88,8 +88,8 @@ int MAIN(int argc, char **argv)
 	BIO *bmd=NULL;
 	BIO *out = NULL;
 	const char *name;
-#define PROG_NAME_SIZE  16
-	char pname[PROG_NAME_SIZE];
+#define PROG_NAME_SIZE  39
+	char pname[PROG_NAME_SIZE+1];
 	int separator=0;
 	int debug=0;
 	int keyform=FORMAT_PEM;
@@ -112,6 +112,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	/* first check the program name */
 	program_name(argv[0],pname,PROG_NAME_SIZE);
 

apps/dh.c

@@ -100,6 +100,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	engine=NULL;
 	infile=NULL;
 	outfile=NULL;

apps/dhparam.c

@@ -166,6 +166,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -487,7 +490,7 @@ bad:
 		printf("\tif ((dh->p == NULL) || (dh->g == NULL))\n");
 		printf("\t\t{ DH_free(dh); return(NULL); }\n");
 		if (dh->length)
-			printf("\tdh->length = %d;\n", dh->length);
+			printf("\tdh->length = %ld;\n", dh->length);
 		printf("\treturn(dh);\n\t}\n");
 		OPENSSL_free(data);
 		}

apps/dsa.c

@@ -79,6 +79,9 @@
  * -des		- encrypt output if PEM format with DES in cbc mode
  * -des3	- encrypt output if PEM format
  * -idea	- encrypt output if PEM format
+ * -aes128	- encrypt output if PEM format
+ * -aes192	- encrypt output if PEM format
+ * -aes256	- encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the DSA public key
  */
@@ -106,6 +109,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	engine=NULL;
 	infile=NULL;
 	outfile=NULL;
@@ -188,6 +194,10 @@ bad:
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt PEM output with cbc idea\n");
+#endif
+#ifndef OPENSSL_NO_AES
+		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");

apps/dsaparam.c

@@ -106,6 +106,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -183,9 +186,10 @@ bad:
 		BIO_printf(bio_err," -outform arg  output format - DER or PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file\n");
-		BIO_printf(bio_err," -text         print the key in text\n");
+		BIO_printf(bio_err," -text         print as text\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
+		BIO_printf(bio_err," -genkey       generate a DSA key\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");

apps/ecdsa.c

@@ -132,6 +132,9 @@
  * -des		- encrypt output if PEM format with DES in cbc mode
  * -des3	- encrypt output if PEM format
  * -idea	- encrypt output if PEM format
+ * -aes128	- encrypt output if PEM format
+ * -aes192	- encrypt output if PEM format
+ * -aes256	- encrypt output if PEM format
  * -text	- print a text version
  * -pub		- print the ECDSA public key
  * -compressed  - print the public key in compressed form ( default )   
@@ -174,6 +177,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	engine = NULL;
 	infile = NULL;
 	outfile = NULL;
@@ -227,12 +233,12 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv, "-pub") == 0)
 		{
 			pub = 1;
-			buffer = (*(argv+1));
-			if (strcmp(buffer, "compressed") == 0)
+			buffer = (unsigned char *)(*(argv+1));
+			if (strcmp((char *)buffer, "compressed") == 0)
 				point_form = POINT_CONVERSION_COMPRESSED;
-			else if (strcmp(buffer, "hybrid") == 0)
+			else if (strcmp((char *)buffer, "hybrid") == 0)
 				point_form = POINT_CONVERSION_HYBRID;
-			else if (strcmp(buffer, "uncompressed") == 0)
+			else if (strcmp((char *)buffer, "uncompressed") == 0)
 				point_form = POINT_CONVERSION_UNCOMPRESSED;
 			if (point_form)
 			{
@@ -270,6 +276,10 @@ bad:
 		BIO_printf(bio_err, " -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err, " -idea           encrypt PEM output with cbc idea\n");
+#endif
+#ifndef OPENSSL_NO_AES
+		BIO_printf(bio_err, " -aes128, -aes192, -aes256\n");
+		BIO_printf(bio_err, "                 encrypt PEM output with cbc aes\n");
 #endif
 		BIO_printf(bio_err, " -text           print the key in text\n");
 		BIO_printf(bio_err, " -noout          don't print key out\n");

apps/ecdsaparam.c

@@ -133,15 +133,16 @@
  * -out arg		- output file - default stdout
  * -noout
  * -text
+ * -check               - validate the ec parameters
  * -C
  * -noout
  * -genkey		- generate a private public keypair based on the supplied curve
  * -named_curve		- use the curve oid instead of the parameters
- * -NIST_192		- use the NIST recommeded curve parameters over a 192 bit prime field
- * -NIST_224		- use the NIST recommeded curve parameters over a 224 bit prime field
- * -NIST_256		- use the NIST recommeded curve parameters over a 256 bit prime field
- * -NIST_384		- use the NIST recommeded curve parameters over a 384 bit prime field
- * -NIST_521		- use the NIST recommeded curve parameters over a 521 bit prime field
+ * -NIST_192		- use the NIST recommended curve parameters over a 192 bit prime field
+ * -NIST_224		- use the NIST recommended curve parameters over a 224 bit prime field
+ * -NIST_256		- use the NIST recommended curve parameters over a 256 bit prime field
+ * -NIST_384		- use the NIST recommended curve parameters over a 384 bit prime field
+ * -NIST_521		- use the NIST recommended curve parameters over a 521 bit prime field
  * -X9_62_192v1		- use the X9_62 192v1 example curve over a 192 bit prime field
  * -X9_62_192v2		- use the X9_62 192v2 example curve over a 192 bit prime field
  * -X9_62_192v3		- use the X9_62 192v3 example curve over a 192 bit prime field
@@ -149,6 +150,24 @@
  * -X9_62_239v2		- use the X9_62 239v2 example curve over a 239 bit prime field
  * -X9_62_239v3		- use the X9_62 239v3 example curve over a 239 bit prime field
  * -X9_62_256v1		- use the X9_62 239v1 example curve over a 256 bit prime field
+ * -SECG_PRIME_112R1    - use the SECG 112r1 recommended curve over a 112 bit prime field
+ * -SECG_PRIME_112R2    - use the SECG 112r2 recommended curve over a 112 bit prime field
+ * -SECG_PRIME_128R1    - use the SECG 128r1 recommended curve over a 128 bit prime field
+ * -SECG_PRIME_128R2    - use the SECG 128r2 recommended curve over a 128 bit prime field
+ * -SECG_PRIME_160K1    - use the SECG 160k1 recommended curve over a 160 bit prime field
+ * -SECG_PRIME_160R1    - use the SECG 160r1 recommended curve over a 160 bit prime field
+ * -SECG_PRIME_160R2    - use the SECG 160r2 recommended curve over a 160 bit prime field
+ * -SECG_PRIME_192K1    - use the SECG 192k1 recommended curve over a 192 bit prime field
+ * -SECG_PRIME_192R1    - use the SECG 192r1 recommended curve over a 192 bit prime field
+ * -SECG_PRIME_224K1    - use the SECG 224k1 recommended curve over a 224 bit prime field
+ * -SECG_PRIME_224R1    - use the SECG 224r1 recommended curve over a 224 bit prime field
+ * -SECG_PRIME_256K1    - use the SECG 256k1 recommended curve over a 256 bit prime field
+ * -SECG_PRIME_256R1    - use the SECG 256r1 recommended curve over a 256 bit prime field
+ * -SECG_PRIME_384R1    - use the SECG 384r1 recommended curve over a 384 bit prime field
+ * -SECG_PRIME_521R1    - use the SECG 521r1 recommended curve over a 521 bit prime field
+ * -WTLS_6              - use the WAP/WTLS recommended curve number 6 over a 112 bit field
+ * -WTLS_8              - use the WAP/WTLS recommended curve number 8 over a 112 bit field
+ * -WTLS_9              - use the WAP/WTLS recommended curve number 9 over a 160 bit field
  */
 
 int MAIN(int, char **);
@@ -162,6 +181,7 @@ int MAIN(int argc, char **argv)
 	int 	informat, outformat, noout = 0, C = 0, ret = 1;
 	char 	*infile, *outfile, *prog, *inrand = NULL;
 	int 	genkey = 0;
+	int	check = 0;
 	int 	need_rand = 0;
 	char 	*engine=NULL;
 	int	curve_type = EC_GROUP_NO_CURVE;
@@ -178,6 +198,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -217,6 +240,8 @@ int MAIN(int argc, char **argv)
 			text = 1;
 		else if (strcmp(*argv,"-C") == 0)
 			C = 1;
+		else if (strcmp(*argv,"-check") == 0)
+			check = 1;
 		else if (strcmp(*argv,"-genkey") == 0)
 		{
 			genkey = 1;
@@ -254,6 +279,42 @@ int MAIN(int argc, char **argv)
 			curve_type = EC_GROUP_X9_62_PRIME_239V3;
 		else if (strcmp(*argv, "-X9_62_256v1") == 0)
 			curve_type = EC_GROUP_X9_62_PRIME_256V1;
+		else if (strcmp(*argv, "-SECG_PRIME_112R1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_112R1;
+		else if (strcmp(*argv, "-SECG_PRIME_112R2") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_112R2;
+		else if (strcmp(*argv, "-SECG_PRIME_128R1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_128R1;
+		else if (strcmp(*argv, "-SECG_PRIME_128R2") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_128R2;
+		else if (strcmp(*argv, "-SECG_PRIME_160K1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_160K1;
+		else if (strcmp(*argv, "-SECG_PRIME_160R1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_160R1;
+		else if (strcmp(*argv, "-SECG_PRIME_160R2") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_160R2;
+		else if (strcmp(*argv, "-SECG_PRIME_192K1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_192K1;
+		else if (strcmp(*argv, "-SECG_PRIME_192R1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_192R1;
+		else if (strcmp(*argv, "-SECG_PRIME_224K1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_224K1;
+		else if (strcmp(*argv, "-SECG_PRIME_224R1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_224R1;
+		else if (strcmp(*argv, "-SECG_PRIME_256K1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_256K1;
+		else if (strcmp(*argv, "-SECG_PRIME_256R1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_256R1;
+		else if (strcmp(*argv, "-SECG_PRIME_384R1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_384R1;
+		else if (strcmp(*argv, "-SECG_PRIME_521R1") == 0)
+			curve_type = EC_GROUP_SECG_PRIME_521R1;
+		else if (strcmp(*argv, "-WTLS_6") == 0)
+			curve_type = EC_GROUP_WTLS_6;
+		else if (strcmp(*argv, "-WTLS_8") == 0)
+			curve_type = EC_GROUP_WTLS_8;
+		else if (strcmp(*argv, "-WTLS_9") == 0)
+			curve_type = EC_GROUP_WTLS_9;
 		else if (strcmp(*argv, "-noout") == 0)
 			noout=1;
 		else
@@ -271,28 +332,47 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] [bits] <infile >outfile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg   input format - DER or PEM\n");
-		BIO_printf(bio_err," -outform arg  output format - DER or PEM\n");
-		BIO_printf(bio_err," -in arg       input file\n");
-		BIO_printf(bio_err," -out arg      output file\n");
-		BIO_printf(bio_err," -text         print the key in text\n");
-		BIO_printf(bio_err," -C            Output C code\n");
-		BIO_printf(bio_err," -noout        no output\n");
-		BIO_printf(bio_err," -rand         files to use for random number input\n");
-		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-		BIO_printf(bio_err," -named_curve  use the curve oid instead of the parameters\n");
-		BIO_printf(bio_err," -NIST_192     use the NIST recommeded curve parameters over a 192 bit prime field\n");
-		BIO_printf(bio_err," -NIST_224     use the NIST recommeded curve parameters over a 224 bit prime field\n");
-		BIO_printf(bio_err," -NIST_256     use the NIST recommeded curve parameters over a 256 bit prime field\n");
-		BIO_printf(bio_err," -NIST_384     use the NIST recommeded curve parameters over a 384 bit prime field\n");
-		BIO_printf(bio_err," -NIST_521     use the NIST recommeded curve parameters over a 521 bit prime field\n");
-		BIO_printf(bio_err," -X9_62_192v1  use the X9_62 192v1 example curve over a 192 bit prime field\n");
-		BIO_printf(bio_err," -X9_62_192v2  use the X9_62 192v2 example curve over a 192 bit prime field\n");
-		BIO_printf(bio_err," -X9_62_192v3  use the X9_62 192v3 example curve over a 192 bit prime field\n");
-		BIO_printf(bio_err," -X9_62_239v1  use the X9_62 239v1 example curve over a 239 bit prime field\n");
-		BIO_printf(bio_err," -X9_62_239v2  use the X9_62 239v2 example curve over a 239 bit prime field\n");
-		BIO_printf(bio_err," -X9_62_239v3  use the X9_62 239v3 example curve over a 239 bit prime field\n");
-		BIO_printf(bio_err," -X9_62_256v1  use the X9_62 239v1 example curve over a 256 bit prime field\n");
+		BIO_printf(bio_err," -inform arg        input format - DER or PEM\n");
+		BIO_printf(bio_err," -outform arg       output format - DER or PEM\n");
+		BIO_printf(bio_err," -in arg            input file\n");
+		BIO_printf(bio_err," -out arg           output file\n");
+		BIO_printf(bio_err," -text              print as text\n");
+		BIO_printf(bio_err," -C                 Output C code\n");
+		BIO_printf(bio_err," -check             validate the ec parameters\n");
+		BIO_printf(bio_err," -noout             no output\n");
+		BIO_printf(bio_err," -rand              files to use for random number input\n");
+		BIO_printf(bio_err," -engine e          use engine e, possibly a hardware device.\n");
+		BIO_printf(bio_err," -named_curve       use the curve oid instead of the parameters\n");
+		BIO_printf(bio_err," -NIST_192          use the NIST recommended curve parameters over a 192 bit prime field\n");
+		BIO_printf(bio_err," -NIST_224          use the NIST recommended curve parameters over a 224 bit prime field\n");
+		BIO_printf(bio_err," -NIST_256          use the NIST recommended curve parameters over a 256 bit prime field\n");
+		BIO_printf(bio_err," -NIST_384          use the NIST recommended curve parameters over a 384 bit prime field\n");
+		BIO_printf(bio_err," -NIST_521          use the NIST recommended curve parameters over a 521 bit prime field\n");
+		BIO_printf(bio_err," -X9_62_192v1       use the X9_62 192v1 example curve over a 192 bit prime field\n");
+		BIO_printf(bio_err," -X9_62_192v2       use the X9_62 192v2 example curve over a 192 bit prime field\n");
+		BIO_printf(bio_err," -X9_62_192v3       use the X9_62 192v3 example curve over a 192 bit prime field\n");
+		BIO_printf(bio_err," -X9_62_239v1       use the X9_62 239v1 example curve over a 239 bit prime field\n");
+		BIO_printf(bio_err," -X9_62_239v2       use the X9_62 239v2 example curve over a 239 bit prime field\n");
+		BIO_printf(bio_err," -X9_62_239v3       use the X9_62 239v3 example curve over a 239 bit prime field\n");
+		BIO_printf(bio_err," -X9_62_256v1       use the X9_62 239v1 example curve over a 256 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_112R1  use the SECG 112r1 recommended curve over a 112 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_112R2  use the SECG 112r2 recommended curve over a 112 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_128R1  use the SECG 128r1 recommended curve over a 128 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_128R2  use the SECG 128r2 recommended curve over a 128 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_160K1  use the SECG 160k1 recommended curve over a 160 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_160R1  use the SECG 160r1 recommended curve over a 160 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_160R2  use the SECG 160r2 recommended curve over a 160 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_192K1  use the SECG 192k1 recommended curve over a 192 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_192R1  use the SECG 192r1 recommended curve over a 192 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_224K1  use the SECG 224k1 recommended curve over a 224 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_224R1  use the SECG 224r1 recommended curve over a 224 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_256K1  use the SECG 256k1 recommended curve over a 256 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_256R1  use the SECG 256r1 recommended curve over a 256 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_384R1  use the SECG 384r1 recommended curve over a 384 bit prime field\n");
+		BIO_printf(bio_err," -SECG_PRIME_521R1  use the SECG 521r1 recommended curve over a 521 bit prime field\n");
+		BIO_printf(bio_err," -WTLS_6            use the WAP/WTLS recommended curve number 6 over a 112 bit field\n");
+		BIO_printf(bio_err," -WTLS_8            use the WAP/WTLS recommended curve number 8 over a 112 bit field\n");
+		BIO_printf(bio_err," -WTLS_9            use the WAP/WTLS recommended curve number 9 over a 112 bit field\n");
 		goto end;
 	}
 
@@ -373,9 +453,24 @@ bad:
 	{
 		ECDSAParameters_print(out, ecdsa);
 	}
+
+	if (check)
+	{
+		if (ecdsa == NULL)
+			BIO_printf(bio_err, "no elliptic curve parameters\n");
+		BIO_printf(bio_err, "checking elliptic curve parameters: ");
+		if (!EC_GROUP_check(ecdsa->group, NULL))
+		{
+			BIO_printf(bio_err, "failed\n");
+			ERR_print_errors(bio_err);
+		}
+		else
+			BIO_printf(bio_err, "ok\n");
+			
+	}
 	
 	if (C)
-	{	// TODO : characteristic two
+	{	/* TODO: characteristic two */
 		int 	l, len, bits_p;
 		if ((tmp_1 = BN_new()) == NULL || (tmp_2 = BN_new()) == NULL ||
 		    (tmp_3 = BN_new()) == NULL || (tmp_4 = BN_new()) == NULL ||
@@ -411,7 +506,7 @@ bad:
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
-		printf("\n\t};\n");
+		printf("\n\t};\n\n");
 
 		l = BN_bn2bin(tmp_2, data);
 		printf("static unsigned char ecdsa%d_a[]={",bits_p);
@@ -431,34 +526,34 @@ bad:
 		}
 		printf("\n\t};\n\n");
 
-		l = BN_bn2bin(tmp_3, data);
+		l = BN_bn2bin(tmp_4, data);
 		printf("static unsigned char ecdsa%d_x[]={", bits_p);
 		for (i=0; i<l; i++)
 		{
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
-		printf("\n\t};\n\n");
+		printf("\n\t};\n");
 
-		l = BN_bn2bin(tmp_3, data);
+		l = BN_bn2bin(tmp_5, data);
 		printf("static unsigned char ecdsa%d_y[]={", bits_p);
 		for (i=0; i<l; i++)
 		{
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
-		printf("\n\t};\n\n");
+		printf("\n\t};\n");
 
-		l = BN_bn2bin(tmp_3, data);
+		l = BN_bn2bin(tmp_6, data);
 		printf("static unsigned char ecdsa%d_o[]={", bits_p);
 		for (i=0; i<l; i++)
 		{
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
-		printf("\n\t};\n\n");
+		printf("\n\t};\n");
 
-		l = BN_bn2bin(tmp_3, data);
+		l = BN_bn2bin(tmp_7, data);
 		printf("static unsigned char ecdsa%d_c[]={", bits_p);
 		for (i=0; i<l; i++)
 		{
@@ -468,38 +563,41 @@ bad:
 		printf("\n\t};\n\n");
 
 		/* FIXME:
-		 * the generated code does not make much sense
-		 *
-		 * TODO:
-		 * use EC_GROUP_new_curve_GFp instead of using EC_GFp_mont_method directly
+		 * generated code should check for errors
 		 */
-		
-		printf("ECDSA *get_ecdsa%d()\n\t{\n",bits_p);
-		printf("\tint      ok=1;\n");
+
+		printf("ECDSA *get_ecdsa%d(void)\n\t{\n",bits_p);
+		printf("\tint ok=0;\n");
 		printf("\tECDSA    *ecdsa=NULL;\n");
 		printf("\tEC_POINT *point=NULL;\n");
-		printf("\tBIGNUM   *tmp_1=NULL,*tmp_2=NULL,*tmp_3=NULL;\n");
-		printf("\tBN_CTX   *ctx=NULL;\n\n");
-		printf("\tecdsa=ECDSA_new();\n");
-		printf("\ttmp_1=BN_new();\n");
-		printf("\ttmp_2=BN_new();\n");
-		printf("\ttmp_3=BN_new();\n");
-		printf("\tctx=BN_CTX_new();\n");
-		printf("\tif (!ecdsa || !tmp_1 || !tmp_2 || !tmp_3 || !ctx) ok=0;\n");
-		printf("\tif (ok && !ecdsa->group=EC_GROUP_new(EC_GFp_mont_method())) == NULL) ok=0;");
-		printf("\tif (ok && !BN_bin2bn(ecdsa%d_p,sizeof(ecdsa%d_p),tmp_1)) ok=0;\n", bits_p, bits_p);
-		printf("\tif (ok && !BN_bin2bn(ecdsa%d_a,sizeof(ecdsa%d_a),tmp_2)) ok=0;\n", bits_p, bits_p);
-		printf("\tif (ok && !BN_bin2bn(ecdsa%d_b,sizeof(ecdsa%d_b),tmp_3)) ok=0;\n", bits_p, bits_p);
-		printf("\tif (ok && !EC_GROUP_set_curve_GFp(ecdsa->group,tmp_1,tmp_2,tmp_3,ctx)) ok=0;\n");
-		printf("\tif (ok && !BN_bin2bn(ecdsa%d_x,sizeof(ecdsa%d_p),tmp_1)) ok=0;\n", bits_p, bits_p);
-		printf("\tif (ok && !BN_bin2bn(ecdsa%d_y,sizeof(ecdsa%d_a),tmp_2)) ok=0;\n", bits_p, bits_p);
-		printf("\tif (ok && (point = EC_POINT_new(ecdsa->group)) == NULL) ok=0;\n");
-		printf("\tif (ok && !EC_POINT_set_affine_coordinates_GFp(ecdsa->group,point,tmp_1,tmp_2,ctx)) ok=0:\n");
-		printf("\tif (ok && !BN_bin2bn(ecdsa%d_o,sizeof(ecdsa%d_b),tmp_1)) ok=0;\n", bits_p, bits_p);
-		printf("\tif (ok && !BN_bin2bn(ecdsa%d_c,sizeof(ecdsa%d_b),tmp_2)) ok=0;\n", bits_p, bits_p);
-		printf("\tif (ok && !EC_GROUP_set_generator(ecdsa->group,point,tmp_1,tmp_2)) ok=0;\n");
-		printf("\tif ((ecdsa->group == NULL) || (ecdsa->pub_key == NULL) || (ecdsa->priv_key == NULL))\n");
-		printf("\t\t{ ECDSA_free(ecdsa); return(NULL); }\n");
+		printf("\tBIGNUM   *tmp_1=NULL,*tmp_2=NULL,*tmp_3=NULL;\n\n");
+		printf("\tif ((ecdsa=ECDSA_new()) == NULL)\n");
+		printf("\t\treturn(NULL);\n\n");
+		printf("\t/* generate EC_GROUP structure */\n");
+		printf("\tif ((tmp_1 = BN_bin2bn(ecdsa%d_p, sizeof(ecdsa%d_p), NULL)) == NULL) goto err;\n", bits_p, bits_p);
+		printf("\tif ((tmp_2 = BN_bin2bn(ecdsa%d_a, sizeof(ecdsa%d_a), NULL)) == NULL) goto err;\n", bits_p, bits_p);
+		printf("\tif ((tmp_3 = BN_bin2bn(ecdsa%d_b, sizeof(ecdsa%d_b), NULL)) == NULL) goto err;\n", bits_p, bits_p);
+		printf("\tif ((ecdsa->group = EC_GROUP_new_curve_GFp(tmp_1, tmp_2, tmp_3, NULL)) == NULL) goto err;\n\n");
+		printf("\t/* build generator */\n");
+		printf("\tif (!BN_bin2bn(ecdsa%d_x, sizeof(ecdsa%d_x), tmp_1)) goto err;\n", bits_p, bits_p);
+		printf("\tif (!BN_bin2bn(ecdsa%d_y, sizeof(ecdsa%d_y), tmp_2)) goto err;\n", bits_p, bits_p);
+		printf("\tif ((point = EC_POINT_new(ecdsa->group)) == NULL) goto err;\n");
+		printf("\tif (!EC_POINT_set_affine_coordinates_GFp(ecdsa->group, point, tmp_1, tmp_2, NULL)) goto err;\n");
+		printf("\t/* set generator, order and cofactor */\n");
+		printf("\tif (!BN_bin2bn(ecdsa%d_o, sizeof(ecdsa%d_o), tmp_1)) goto err;\n", bits_p, bits_p);
+		printf("\tif (!BN_bin2bn(ecdsa%d_c, sizeof(ecdsa%d_c), tmp_2)) goto err;\n", bits_p, bits_p);
+		printf("\tif (!EC_GROUP_set_generator(ecdsa->group, point, tmp_1, tmp_2)) goto err;\n");
+		printf("\n\tok=1;\n");
+		printf("err:\n");
+		printf("\tif (tmp_1) BN_free(tmp_1);\n");
+		printf("\tif (tmp_2) BN_free(tmp_2);\n");
+		printf("\tif (tmp_3) BN_free(tmp_3);\n");
+		printf("\tif (point) EC_POINT_free(point);\n");
+		printf("\tif (!ok)\n");
+		printf("\t\t{\n");
+		printf("\t\tECDSA_free(ecdsa);\n");
+		printf("\t\tecdsa = NULL;\n");
+		printf("\t\t}\n");
 		printf("\treturn(ecdsa);\n\t}\n");
 	}
 

apps/enc.c

@@ -117,8 +117,8 @@ int MAIN(int argc, char **argv)
 	const EVP_CIPHER *cipher=NULL,*c;
 	char *inf=NULL,*outf=NULL;
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
-#define PROG_NAME_SIZE  16
-	char pname[PROG_NAME_SIZE];
+#define PROG_NAME_SIZE  39
+	char pname[PROG_NAME_SIZE+1];
 	char *engine = NULL;
 
 	apps_startup();
@@ -127,6 +127,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	/* first check the program name */
 	program_name(argv[0],pname,PROG_NAME_SIZE);
 	if (strcmp(pname,"base64") == 0)
@@ -482,11 +485,6 @@ bad:
 			else
 				memset(str,0,strlen(str));
 			}
-		if ((hiv != NULL) && !set_hex(hiv,iv,sizeof iv))
-			{
-			BIO_printf(bio_err,"invalid hex iv value\n");
-			goto end;
-			}
 		if ((hiv == NULL) && (str == NULL))
 			{
 			/* No IV was explicitly set and no IV was generated
@@ -495,6 +493,11 @@ bad:
 			BIO_printf(bio_err, "iv undefined\n");
 			goto end;
 			}
+		if ((hiv != NULL) && !set_hex(hiv,iv,sizeof iv))
+			{
+			BIO_printf(bio_err,"invalid hex iv value\n");
+			goto end;
+			}
 		if ((hkey != NULL) && !set_hex(hkey,key,sizeof key))
 			{
 			BIO_printf(bio_err,"invalid hex key value\n");

apps/engine.c

@@ -356,6 +356,9 @@ int MAIN(int argc, char **argv)
 
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
 	bio_out=BIO_new_fp(stdout,BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
 	{

apps/gendh.c

@@ -96,6 +96,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	argv++;
 	argc--;
 	for (;;)

apps/gendsa.c

@@ -93,6 +93,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	argv++;
 	argc--;
 	for (;;)
@@ -129,6 +132,14 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
+#endif
+#ifndef OPENSSL_NO_AES
+		else if (strcmp(*argv,"-aes128") == 0)
+			enc=EVP_aes_128_cbc();
+		else if (strcmp(*argv,"-aes192") == 0)
+			enc=EVP_aes_192_cbc();
+		else if (strcmp(*argv,"-aes256") == 0)
+			enc=EVP_aes_256_cbc();
 #endif
 		else if (**argv != '-' && dsaparams == NULL)
 			{
@@ -151,6 +162,10 @@ bad:
 #endif
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
+#endif
+#ifndef OPENSSL_NO_AES
+		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);

apps/genrsa.c

@@ -99,6 +99,9 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
+	if (!load_config(bio_err, NULL))
+		goto err;
 	if ((out=BIO_new(BIO_s_file())) == NULL)
 		{
 		BIO_printf(bio_err,"unable to create BIO for output\n");
@@ -138,6 +141,14 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
+#endif
+#ifndef OPENSSL_NO_AES
+		else if (strcmp(*argv,"-aes128") == 0)
+			enc=EVP_aes_128_cbc();
+		else if (strcmp(*argv,"-aes192") == 0)
+			enc=EVP_aes_192_cbc();
+		else if (strcmp(*argv,"-aes256") == 0)
+			enc=EVP_aes_256_cbc();
 #endif
 		else if (strcmp(*argv,"-passout") == 0)
 			{
@@ -157,6 +168,10 @@ bad:
 		BIO_printf(bio_err," -des3           encrypt the generated key with DES in ede cbc mode (168 bit key)\n");
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt the generated key with IDEA in cbc mode\n");
+#endif
+#ifndef OPENSSL_NO_AES
+		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
 		BIO_printf(bio_err," -out file       output the key to 'file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");

apps/install.com

@@ -62,7 +62,9 @@ $	COPY CA.COM WRK_SSLAEXE:CA.COM/LOG
 $	SET FILE/PROT=W:RE WRK_SSLAEXE:CA.COM
 $	COPY CA.COM WRK_SSLVEXE:CA.COM/LOG
 $	SET FILE/PROT=W:RE WRK_SSLVEXE:CA.COM
-$	COPY OPENSSL-VMS.CNF WRK_SSLROOT:[000000]OPENSSL.CNF/LOG
+$	COPY OPENSSL-VMS.CNF WRK_SSLROOT:[000000]OPENSSL-VMS.CNF/LOG
+$	SET FILE/PROT=W:R WRK_SSLROOT:[000000]OPENSSL-VMS.CNF
+$	COPY OPENSSL.CNF WRK_SSLROOT:[000000]OPENSSL.CNF/LOG
 $	SET FILE/PROT=W:R WRK_SSLROOT:[000000]OPENSSL.CNF
 $	SET ON
 $

apps/makeapps.com

@@ -44,12 +44,19 @@ $!  keywords:
 $!
 $!	UCX		for UCX
 $!	SOCKETSHR	for SOCKETSHR+NETLIB
+$!	TCPIP		for TCPIP (post UCX)
 $!
 $!  P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
 $!
 $!  P6, if defined, sets a choice of programs to compile.
 $!
 $!
+$!
+$! Define USER_CCFLAGS
+$!
+$ @[-]vms_build_info.com
+$ WRITE SYS$OUTPUT " Using USER_CCFLAGS = ", USER_CCFLAGS
+$!
 $! Define A TCP/IP Library That We Will Need To Link To.
 $! (That Is, If We Need To Link To One.)
 $!
@@ -98,15 +105,15 @@ $ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
 $!
 $! Define The CRYPTO Library.
 $!
-$ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
+$ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO'build_bits'.OLB
 $!
 $! Define The RSAREF Library.
 $!
-$ RSAREF_LIB := SYS$DISK:[-.'ARCH'.EXE.RSAREF]LIBRSAGLUE.OLB
+$ RSAREF_LIB := SYS$DISK:[-.'ARCH'.EXE.RSAREF]LIBRSAGLUE'build_bits'.OLB
 $!
 $! Define The SSL Library.
 $!
-$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB
+$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL'build_bits'.OLB
 $!
 $! Define The OBJ Directory.
 $!
@@ -125,6 +132,23 @@ $! End The OBJ Directory Check.
 $!
 $ ENDIF
 $!
+$! Define The LIS Directory.
+$!
+$ LIS_DIR := SYS$DISK:[-.'ARCH'.LIS.APPS]
+$!
+$! Check To See If The OBJ Directory Exists.
+$!
+$ IF (F$PARSE(LIS_DIR).EQS."")
+$ THEN
+$!
+$!  It Dosen't Exist, So Create It.
+$!
+$   CREATE/DIRECTORY 'LIS_DIR'
+$!
+$! End The LIS Directory Check.
+$!
+$ ENDIF
+$!
 $! Define The EXE Directory.
 $!
 $ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS]
@@ -155,13 +179,13 @@ $!
 $ LIB_FILES = "VERIFY;ASN1PARS;REQ;DGST;DH;DHPARAM;ENC;PASSWD;GENDH;ERRSTR;"+-
 	      "CA;PKCS7;CRL2P7;CRL;"+-
 	      "RSA;RSAUTL;DSA;DSAPARAM;"+-
-	      "X509;GENRSA;GENDSA;S_SERVER;S_CLIENT;SPEED;"+-
+	      "X509;GENRSA;GENDSA;TERM_SOCK;S_SERVER;S_CLIENT;SPEED;"+-
 	      "S_TIME;APPS;S_CB;S_SOCKET;APP_RAND;VERSION;SESS_ID;"+-
 	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP"
 $ APP_FILES := OPENSSL,'OBJ_DIR'VERIFY.OBJ,ASN1PARS.OBJ,REQ.OBJ,DGST.OBJ,DH.OBJ,DHPARAM.OBJ,ENC.OBJ,PASSWD.OBJ,GENDH.OBJ,ERRSTR.OBJ,-
 	       CA.OBJ,PKCS7.OBJ,CRL2P7.OBJ,CRL.OBJ,-
 	       RSA.OBJ,RSAUTL.OBJ,DSA.OBJ,DSAPARAM.OBJ,-
-	       X509.OBJ,GENRSA.OBJ,GENDSA.OBJ,S_SERVER.OBJ,S_CLIENT.OBJ,SPEED.OBJ,-
+	       X509.OBJ,GENRSA.OBJ,GENDSA.OBJ,TERM_SOCK.OBJ,S_SERVER.OBJ,S_CLIENT.OBJ,SPEED.OBJ,-
 	       S_TIME.OBJ,APPS.OBJ,S_CB.OBJ,S_SOCKET.OBJ,APP_RAND.OBJ,VERSION.OBJ,SESS_ID.OBJ,-
 	       CIPHERS.OBJ,NSEQ.OBJ,PKCS12.OBJ,PKCS8.OBJ,SPKAC.OBJ,SMIME.OBJ,RAND.OBJ,ENGINE.OBJ,OCSP.OBJ
 $ TCPIP_PROGRAMS = ",,"
@@ -234,6 +258,10 @@ $! Create The Object File Name.
 $!
 $ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
 $!
+$! Create The Listing File Name.
+$!
+$ LIST_FILE = LIS_DIR + FILE_NAME + ".LIS"
+$!
 $! Create The Executable File Name.
 $!
 $ EXE_FILE = EXE_DIR + FILE_NAME + ".EXE"
@@ -247,7 +275,7 @@ $!
 $!  Tell The User That The File Dosen't Exist.
 $!
 $   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
+$   WRITE SYS$OUTPUT F$MESSAGE("%X10018290") + ".  The File ",SOURCE_FILE," Dosen't Exist."
 $   WRITE SYS$OUTPUT ""
 $!
 $!  Exit The Build.
@@ -272,9 +300,9 @@ $!
 $ ON ERROR THEN GOTO NEXT_FILE
 $ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2
 $ THEN
-$   CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$   CC2/OBJECT='OBJECT_FILE'/LIST='LIST_FILE'/MACHINE_CODE 'SOURCE_FILE'
 $ ELSE
-$   CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$   CC/OBJECT='OBJECT_FILE'/LIST='LIST_FILE'/MACHINE_CODE 'SOURCE_FILE'
 $ ENDIF
 $!
 $ ON WARNING THEN GOTO NEXT_FILE
@@ -304,10 +332,14 @@ $   THEN
 $!
 $!    Link With The RSAREF Library And A Specific TCP/IP Library.
 $!
-$     LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+$     LINK /'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' /MAP='MAP_FILE' /FULL/CROSS -
 	  'OBJECT_FILE''EXTRA_OBJ', -
-          'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
-          'TCPIP_LIB','OPT_FILE'/OPTION
+          'SSL_LIB'/LIBRARY,-
+	  'CRYPTO_LIB'/LIBRARY, -
+	  'RSAREF_LIB'/LIBRARY, -
+          'TCPIP_LIB', -
+	  'OPT_FILE'/OPTION, -
+	  SYS$DISK:[-]SSL_IDENT.OPT/OPTION
 $!
 $!  Else...
 $!
@@ -315,10 +347,13 @@ $   ELSE
 $!
 $!    Link With The RSAREF Library And NO TCP/IP Library.
 $!
-$     LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+$     LINK /'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' /MAP='MAP_FILE' /FULL/CROSS -
 	  'OBJECT_FILE''EXTRA_OBJ', -
-          'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
-          'OPT_FILE'/OPTION
+          'SSL_LIB'/LIBRARY, -
+	  'CRYPTO_LIB'/LIBRARY, -
+	  'RSAREF_LIB'/LIBRARY, -
+          'OPT_FILE'/OPTION, -
+	  SYS$DISK:[-]SSL_IDENT.OPT/OPTION
 $!
 $!  End The TCP/IP Library Check.
 $!
@@ -338,10 +373,14 @@ $   THEN
 $!
 $!    Don't Link With The RSAREF Routines And TCP/IP Library.
 $!
-$       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+$       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' /MAP='MAP_FILE' /FULL/CROSS -
 	    'OBJECT_FILE''EXTRA_OBJ', -
-            'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-            'TCPIP_LIB','OPT_FILE'/OPTION
+            'SSL_LIB'/LIBRARY, -
+	    'CRYPTO_LIB'/LIBRARY, -
+            'TCPIP_LIB', -
+	    'OPT_FILE'/OPTION, -
+	  SYS$DISK:[-]SSL_IDENT.OPT/OPTION
+
 $!
 $!  Else...
 $!
@@ -349,10 +388,13 @@ $   ELSE
 $!
 $!    Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
 $!
-$       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+$       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' /MAP='MAP_FILE' /FULL/CROSS -
 	    'OBJECT_FILE''EXTRA_OBJ', -
-            'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-            'OPT_FILE'/OPTION
+            'SSL_LIB'/LIBRARY, -
+	    'CRYPTO_LIB'/LIBRARY, -
+            'OPT_FILE'/OPTION, -
+	  SYS$DISK:[-]SSL_IDENT.OPT/OPTION
+$!
 $!
 $!  End The TCP/IP Library Check.
 $!
@@ -489,6 +531,7 @@ $!  End The Option File Search.
 $!
 $   ENDIF
 $!
+$!
 $! End The DEC C Check.
 $!
 $ ENDIF
@@ -838,12 +881,12 @@ $     CC = "CC"
 $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
-           "/NOLIST/PREFIX=ALL" + -
+           "/PREFIX=ALL" + -
 	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "SYS$DISK:[]VAX_DECC_OPTIONS.OPT"
+$     OPT_FILE = "SYS$DISK:[]''arch'_DECC_OPTIONS.OPT"
 $!
 $!  End DECC Check.
 $!
@@ -870,7 +913,7 @@ $	WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
 $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'" + -
 	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
 $     CCDEFS = CCDEFS + ",""VAXC"""
 $!
@@ -880,7 +923,7 @@ $     DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "SYS$DISK:[]VAX_VAXC_OPTIONS.OPT"
+$     OPT_FILE = "SYS$DISK:[]''arch'_VAXC_OPTIONS.OPT"
 $!
 $!  End VAXC Check
 $!
@@ -902,12 +945,12 @@ $!
 $!    Use GNU C...
 $!
 $     IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC
-$     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+$     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'" + -
 	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "SYS$DISK:[]VAX_GNUC_OPTIONS.OPT"
+$     OPT_FILE = "SYS$DISK:[]''arch'_GNUC_OPTIONS.OPT"
 $!
 $!  End The GNU C Check.
 $!
@@ -963,7 +1006,7 @@ $ ENDIF
 $!
 $! Time to check the contents, and to make sure we get the correct library.
 $!
-$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX"
+$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX" .OR. P4.EQS."TCPIP" .OR. P4.EQS."NONE"
 $ THEN
 $!
 $!  Check to see if SOCKETSHR was chosen
@@ -973,7 +1016,7 @@ $   THEN
 $!
 $!    Set the library to use SOCKETSHR
 $!
-$     TCPIP_LIB = "[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
 $!
 $!    Done with SOCKETSHR
 $!
@@ -999,19 +1042,45 @@ $   THEN
 $!
 $!    Set the library to use UCX.
 $!
-$     TCPIP_LIB = "[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
 $     IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
 $     THEN
-$       TCPIP_LIB = "[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$       TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
 $     ELSE
 $       IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
-	  TCPIP_LIB = "[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+	  TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
 $     ENDIF
 $!
 $!    Done with UCX
 $!
 $   ENDIF
 $!
+$!  Check to see if TCPIP (post UCX) was chosen
+$!
+$   IF P4.EQS."TCPIP"
+$   THEN
+$!
+$!    Set the library to use TCPIP.
+$!
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$!
+$!    Done with TCPIP
+$!
+$   ENDIF
+$!
+$!  Check to see if NONE was chosen
+$!
+$   IF P4.EQS."NONE"
+$   THEN
+$!
+$!    Do not use TCPIP.
+$!
+$     TCPIP_LIB = ""
+$!
+$!    Done with TCPIP
+$!
+$   ENDIF
+$!
 $!  Add TCP/IP type to CC definitions.
 $!
 $   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P4'"
@@ -1031,6 +1100,7 @@ $   WRITE SYS$OUTPUT "The Option ",P4," Is Invalid.  The Valid Options Are:"
 $   WRITE SYS$OUTPUT ""
 $   WRITE SYS$OUTPUT "    SOCKETSHR  :  To link with SOCKETSHR TCP/IP library."
 $   WRITE SYS$OUTPUT "    UCX        :  To link with UCX TCP/IP library."
+$   WRITE SYS$OUTPUT "    TCPIP      :  To link with TCPIP (post UCX) TCP/IP library."
 $   WRITE SYS$OUTPUT ""
 $!
 $!  Time To EXIT.

apps/ocsp.c

@@ -145,6 +145,9 @@ int MAIN(int argc, char **argv)
 	int nmin = 0, ndays = -1;
 
 	if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
 	SSL_load_error_strings();
 	args = argv + 1;
 	reqnames = sk_new_null();

apps/openssl-vms.cnf

@@ -3,8 +3,8 @@
 # This is mostly being used for generation of certificate requests.
 #
 
-RANDFILE		= $ENV::HOME/.rnd
-oid_file		= $ENV::HOME/.oid
+RANDFILE		= ${ENV::HOME}/.rnd
+oid_file		= ${ENV::HOME}/.oid
 oid_section		= new_oids
 
 # To use this configuration file with the "-extfile" option of the
@@ -29,17 +29,17 @@ default_ca	= CA_default		# The default ca section
 ####################################################################
 [ CA_default ]
 
-dir		= sys\$disk:[.demoCA	# Where everything is kept
-certs		= $dir.certs]		# Where the issued certs are kept
-crl_dir		= $dir.crl]		# Where the issued crl are kept
-database	= $dir]index.txt	# database index file.
-new_certs_dir	= $dir.newcerts]	# default place for new certs.
+dir		= ssl$root:[000000		# Where everything is kept
+certs		= ${dir}.certs]			# Where the issued certs are kept
+crl_dir		= ${dir}.certs]			# Where the issued crl are kept
+database	= ${dir}.private]index.txt	# database index file.
+new_certs_dir	= ${dir}.certs]			# default place for new certs.
 
-certificate	= $dir]cacert.pem 	# The CA certificate
-serial		= $dir]serial.		# The current serial number
-crl		= $dir]crl.pem 		# The current CRL
-private_key	= $dir.private]cakey.pem# The private key
-RANDFILE	= $dir.private].rand	# private random number file
+certificate	= ${dir}]cacert.pem		# The CA certificate
+serial		= ${dir}.private]serial.txt	# The current serial number
+crl		= ${dir}]crl.pem 		# The current CRL
+private_key	= ${dir}.private]cakey.pem	# The private key
+RANDFILE	= ${dir}.private].rand		# private random number file
 
 x509_extensions	= usr_cert		# The extentions to add to the cert
 
@@ -60,8 +60,8 @@ policy		= policy_match
 # For the CA policy
 [ policy_match ]
 countryName		= match
-stateOrProvinceName	= match
-organizationName	= match
+stateOrProvinceName	= supplied
+organizationName	= supplied
 organizationalUnitName	= optional
 commonName		= supplied
 emailAddress		= optional

apps/openssl.c

@@ -138,6 +138,18 @@ static unsigned long MS_CALLBACK hash(const void *a_void);
 /* static int MS_CALLBACK cmp(FUNCTION *a,FUNCTION *b); */
 static int MS_CALLBACK cmp(const void *a_void,const void *b_void);
 static LHASH *prog_init(void );
+
+#ifdef OPENSSL_SYS_VMS
+#if __INITIAL_POINTER_SIZE == 64
+#pragma __required_pointer_size __save
+#pragma __required_pointer_size 32
+#endif
+typedef char ** Argv_32;
+#if __INITIAL_POINTER_SIZE == 64
+#pragma __required_pointer_size __restore
+#endif
+#endif
+
 static int do_cmd(LHASH *prog,int argc,char *argv[]);
 CONF *config=NULL;
 char *default_config_file=NULL;
@@ -212,18 +224,30 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 	}
 
 
+#ifdef OPENSSL_SYS_VMS
+int main(int Argc, Argv_32 argv32)
+#else
 int main(int Argc, char *Argv[])
+#endif
 	{
 	ARGS arg;
-#define PROG_NAME_SIZE	16
-	char pname[PROG_NAME_SIZE];
+#define PROG_NAME_SIZE	39
+	char pname[PROG_NAME_SIZE+1];
 	FUNCTION f,*fp;
 	MS_STATIC char *prompt,buf[1024],config_name[256];
 	int n,i,ret=0;
 	int argc;
 	char **argv,*p;
+
+#ifdef OPENSSL_SYS_VMS
+#if __INITIAL_POINTER_SIZE == 64
+	char **argv64;
+#endif
+#endif
+
 	LHASH *prog=NULL;
 	long errline;
+	int loop;  /* For checking if it's first round in the OpenSSL commandline loop */
  
 	arg.data=NULL;
 	arg.count=0;
@@ -284,14 +308,23 @@ int main(int Argc, char *Argv[])
 	prog=prog_init();
 
 	/* first check the program name */
+#ifdef OPENSSL_SYS_VMS
+	program_name(argv32[0],pname,PROG_NAME_SIZE);
+#else
 	program_name(Argv[0],pname,PROG_NAME_SIZE);
+#endif
 
 	f.name=pname;
 	fp=(FUNCTION *)lh_retrieve(prog,&f);
 	if (fp != NULL)
 		{
+#ifdef OPENSSL_SYS_VMS
+		argv32[0]=pname;
+		ret=fp->func(Argc,argv32);
+#else
 		Argv[0]=pname;
 		ret=fp->func(Argc,Argv);
+#endif
 		goto end;
 		}
 
@@ -300,14 +333,32 @@ int main(int Argc, char *Argv[])
 	if (Argc != 1)
 		{
 		Argc--;
+#ifdef OPENSSL_SYS_VMS
+		argv32++;
+ #if __INITIAL_POINTER_SIZE == 64
+		argv64=(char **)_malloc64(sizeof(char *)*Argc);  /* memory allocation in 64-bit address */
+
+        	for (i=0;i<Argc;i++)
+        	{
+                	argv64[i]=argv32[i];  /* copying 32-bit Argv to 64-bit argv*/
+        	}
+
+		ret=do_cmd(prog,Argc,argv64);
+		free(argv64);
+ #else
+		ret=do_cmd(prog,Argc,argv32);
+ #endif
+#else
 		Argv++;
 		ret=do_cmd(prog,Argc,Argv);
+#endif
+
 		if (ret < 0) ret=0;
 		goto end;
 		}
 
 	/* ok, lets enter the old 'OpenSSL>' mode */
-	
+	loop=0;
 	for (;;)
 		{
 		ret=0;
@@ -319,7 +370,14 @@ int main(int Argc, char *Argv[])
 			p[0]='\0';
 			if (i++)
 				prompt=">";
-			else	prompt="OpenSSL> ";
+			else 
+			   if(loop == 0){  /* first round in this loop*/
+				prompt="OpenSSL> ";
+				loop++;
+			   }
+			   else 
+				prompt="\nOpenSSL> ";
+
 			fputs(prompt,stdout);
 			fflush(stdout);
 			fgets(p,n,stdin);
@@ -369,6 +427,7 @@ end:
 #define LIST_MESSAGE_DIGEST_COMMANDS "list-message-digest-commands"
 #define LIST_CIPHER_COMMANDS "list-cipher-commands"
 
+
 static int do_cmd(LHASH *prog, int argc, char *argv[])
 	{
 	FUNCTION f,*fp;

apps/openssl.cnf

@@ -6,7 +6,15 @@
 # This definition stops the following lines choking if HOME isn't
 # defined.
 HOME			= .
-RANDFILE		= $ENV::HOME/.rnd
+
+#
+# From the instructions at http://www.free.lp.se/openssl/docs/openssl3.html#ss3.1,
+# change the value of RANDFILE.  Also moved definition of dir up since RANDFILE
+# depends on it.
+#
+#RANDFILE               = $ENV::HOME/.rnd
+dir             = SSLROOT:[000000       # Where everything is kept
+RANDFILE                = $dir.private]RANDFILE.;
 
 # Extra OBJECT IDENTIFIER info:
 #oid_file		= $ENV::HOME/.oid
@@ -33,8 +41,12 @@ default_ca	= CA_default		# The default ca section
 
 ####################################################################
 [ CA_default ]
-
-dir		= ./demoCA		# Where everything is kept
+#
+# From the instructions at http://www.free.lp.se/openssl/docs/openssl3.html#ss3.1,
+# change the value of dir.
+#
+#dir            = sys\$disk:[.demoCA    # Where everything is kept
+dir             = SSLROOT:[000000       # Where everything is kept
 certs		= $dir/certs		# Where the issued certs are kept
 crl_dir		= $dir/crl		# Where the issued crl are kept
 database	= $dir/index.txt	# database index file.
@@ -174,6 +186,11 @@ basicConstraints=CA:FALSE
 
 # and for everything including object signing:
 # nsCertType = client, email, objsign
+#
+# From the instructions at http://www.free.lp.se/openssl/docs/openssl3.html#ss3.1,
+# include server in the nsCertType.
+#
+nsCertType = client, email, objsign, server
 
 # This is typical in keyUsage for a client certificate.
 # keyUsage = nonRepudiation, digitalSignature, keyEncipherment

apps/passwd.c

@@ -16,7 +16,7 @@
 #include <openssl/evp.h>
 #include <openssl/rand.h>
 #ifndef OPENSSL_NO_DES
-# include <openssl/des_old.h>
+# include <openssl/des.h>
 #endif
 #ifndef NO_MD5CRYPT_1
 # include <openssl/evp.h>
@@ -79,6 +79,9 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
+	if (!load_config(bio_err, NULL))
+		goto err;
 	out = BIO_new(BIO_s_file());
 	if (out == NULL)
 		goto err;
@@ -479,7 +482,7 @@ static int do_passwd(int passed_salt, char **salt_p, char **salt_malloc_p,
 	/* now compute password hash */
 #ifndef OPENSSL_NO_DES
 	if (usecrypt)
-		hash = des_crypt(passwd, *salt_p);
+		hash = DES_crypt(passwd, *salt_p);
 #endif
 #ifndef NO_MD5CRYPT_1
 	if (use1 || useapr1)

apps/pkcs12.c

@@ -127,6 +127,9 @@ int MAIN(int argc, char **argv)
     enc = EVP_des_ede3_cbc();
     if (bio_err == NULL ) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
     args = argv + 1;
 
 
@@ -151,6 +154,11 @@ int MAIN(int argc, char **argv)
 		else if (!strcmp (*args, "-idea")) enc=EVP_idea_cbc();
 #endif
 		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
+#ifndef OPENSSL_NO_AES
+		else if (!strcmp(*args,"-aes128")) enc=EVP_aes_128_cbc();
+		else if (!strcmp(*args,"-aes192")) enc=EVP_aes_192_cbc();
+		else if (!strcmp(*args,"-aes256")) enc=EVP_aes_256_cbc();
+#endif
 		else if (!strcmp (*args, "-noiter")) iter = 1;
 		else if (!strcmp (*args, "-maciter"))
 					 maciter = PKCS12_DEFAULT_ITER;
@@ -279,6 +287,10 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-des3         encrypt private keys with triple DES (default)\n");
 #ifndef OPENSSL_NO_IDEA
 	BIO_printf (bio_err, "-idea         encrypt private keys with idea\n");
+#endif
+#ifndef OPENSSL_NO_AES
+	BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
+	BIO_printf (bio_err, "              encrypt PEM output with cbc aes\n");
 #endif
 	BIO_printf (bio_err, "-nodes        don't encrypt private keys\n");
 	BIO_printf (bio_err, "-noiter       don't use encryption iteration\n");
@@ -767,7 +779,10 @@ int dump_certs_pkeys_bag (BIO *out, PKCS12_SAFEBAG *bag, char *pass,
 		print_attribs (out, bag->attrib, "Bag Attributes");
 		if (!(p8 = PKCS12_decrypt_skey(bag, pass, passlen)))
 				return 0;
-		if (!(pkey = EVP_PKCS82PKEY (p8))) return 0;
+		if (!(pkey = EVP_PKCS82PKEY (p8))) {
+			PKCS8_PRIV_KEY_INFO_free(p8);
+			return 0;
+		}
 		print_attribs (out, p8->attributes, "Key Attributes");
 		PKCS8_PRIV_KEY_INFO_free(p8);
 		PEM_write_bio_PrivateKey (out, pkey, enc, NULL, 0, NULL, pempass);

apps/pkcs8.c

@@ -83,13 +83,16 @@ int MAIN(int argc, char **argv)
 	int nocrypt = 0;
 	X509_SIG *p8;
 	PKCS8_PRIV_KEY_INFO *p8inf;
-	EVP_PKEY *pkey;
+	EVP_PKEY *pkey=NULL;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
 	char *engine=NULL;
 
 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
 
@@ -347,6 +350,7 @@ int MAIN(int argc, char **argv)
 			return (1);
 	}
 
+	end:
 	EVP_PKEY_free(pkey);
 	BIO_free_all(out);
 	BIO_free(in);

apps/rand.c

@@ -92,6 +92,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err = BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto err;
+
 	badopt = 0;
 	i = 0;
 	while (!badopt && argv[++i] != NULL)

apps/req.c

@@ -181,6 +181,7 @@ int MAIN(int argc, char **argv)
 	unsigned long chtype = MBSTRING_ASC;
 #ifndef MONOLITH
 	MS_STATIC char config_name[256];
+	long errline;
 #endif
 
 	req_conf = NULL;
@@ -309,7 +310,7 @@ int MAIN(int argc, char **argv)
 						goto end;
 						}
 
-					dtmp=X509_get_pubkey(xtmp);
+					if ((dtmp=X509_get_pubkey(xtmp)) == NULL) goto end;
 					if (dtmp->type == EVP_PKEY_DSA)
 						dsa_params=DSAparams_dup(dtmp->pkey.dsa);
 					EVP_PKEY_free(dtmp);
@@ -349,7 +350,7 @@ int MAIN(int argc, char **argv)
 						goto end;
 						}
 
-					dtmp=X509_get_pubkey(xtmp);
+					if ((dtmp=X509_get_pubkey(xtmp)) == NULL) goto end;
 					if (dtmp->type == EVP_PKEY_ECDSA)
 						ecdsa_params = ECDSAParameters_dup(dtmp->pkey.ecdsa);
 					EVP_PKEY_free(dtmp);
@@ -504,6 +505,7 @@ bad:
 		BIO_printf(bio_err," -extensions .. specify certificate extension section (override value in config file)\n");
 		BIO_printf(bio_err," -reqexts ..    specify request extension section (override value in config file)\n");
 		BIO_printf(bio_err," -utf8          input characters are UTF8 (default ASCII)\n");
+		BIO_printf(bio_err," -nameopt arg    - various certificate name options\n");
 		goto end;
 		}
 
@@ -529,7 +531,7 @@ bad:
 		}
 	default_config_file=p;
 	config=NCONF_new(NULL);
-	i=NCONF_load(config, p);
+	i=NCONF_load(config, p, &errline);
 #endif
 
 	if (template != NULL)
@@ -560,6 +562,8 @@ bad:
 
 	if (req_conf != NULL)
 		{
+		if (!load_config(bio_err, req_conf))
+			goto end;
 		p=NCONF_get_string(req_conf,NULL,"oid_file");
 		if (p == NULL)
 			ERR_clear_error();
@@ -885,19 +889,20 @@ loop:
 			/* Set version to V3 */
 			if(!X509_set_version(x509ss, 2)) goto end;
 			if (serial)
-				X509_set_serialNumber(x509ss, serial);
+				{
+				if (!X509_set_serialNumber(x509ss, serial)) goto end;
+				}
 			else
-				ASN1_INTEGER_set(X509_get_serialNumber(x509ss),0L);
+				{
+				if (!ASN1_INTEGER_set(X509_get_serialNumber(x509ss),0L)) goto end;
+				}
 
-			X509_set_issuer_name(x509ss,
-				X509_REQ_get_subject_name(req));
-			X509_gmtime_adj(X509_get_notBefore(x509ss),0);
-			X509_gmtime_adj(X509_get_notAfter(x509ss),
-				(long)60*60*24*days);
-			X509_set_subject_name(x509ss,
-				X509_REQ_get_subject_name(req));
+			if (!X509_set_issuer_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
+			if (!X509_gmtime_adj(X509_get_notBefore(x509ss),0)) goto end;
+			if (!X509_gmtime_adj(X509_get_notAfter(x509ss), (long)60*60*24*days)) goto end;
+			if (!X509_set_subject_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
 			tmppkey = X509_REQ_get_pubkey(req);
-			X509_set_pubkey(x509ss,tmppkey);
+			if (!tmppkey || !X509_set_pubkey(x509ss,tmppkey)) goto end;
 			EVP_PKEY_free(tmppkey);
 
 			/* Set up V3 context struct */
@@ -1199,71 +1204,29 @@ static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
 		}
 	if(!i) goto err;
 
-	X509_REQ_set_pubkey(req,pkey);
+	if (!X509_REQ_set_pubkey(req,pkey)) goto err;
 
 	ret=1;
 err:
 	return(ret);
 	}
 
+/*
+ * subject is expected to be in the format /type0=value0/type1=value1/type2=...
+ * where characters may be escaped by \
+ */
 static int build_subject(X509_REQ *req, char *subject, unsigned long chtype)
 	{
-	X509_NAME *n = NULL;
+	X509_NAME *n;
 
-	int i, nid, ne_num=0;
-
-	char *ne_name = NULL;
-	char *ne_value = NULL;
-
-	char *tmp = NULL;
-	char *p[2];
-
-	char *str_list[256];
-       
-	p[0] = ",/";
-        p[1] = "=";
-
-	n = X509_NAME_new();
-
-	tmp = strtok(subject, p[0]);
-	while((tmp != NULL) && (ne_num < (sizeof str_list/sizeof *str_list)))
-		{
-		char *token = tmp;
-
-		while (token[0] == ' ')
-			token++;
-		str_list[ne_num] = token;
-
-		tmp = strtok(NULL, p[0]);
-		ne_num++;
-		}
-
-	for(i = 0; i < ne_num; i++)
-		{
-		ne_name  = strtok(str_list[i], p[1]);
-		ne_value = strtok(NULL, p[1]);
-
-		if ((nid=OBJ_txt2nid(ne_name)) == NID_undef)
-			{
-			BIO_printf(bio_err, "Subject Attribute %s has no known NID, skipped\n", ne_name);
-			continue;
-			}
-
-		if (ne_value == NULL)
-			{
-			BIO_printf(bio_err, "No value provided for Subject Attribute %s, skipped\n", ne_name);
-			continue;
-			}
-
-		if (!X509_NAME_add_entry_by_NID(n, nid, chtype, (unsigned char*)ne_value, -1,-1,0))
-			{
-			X509_NAME_free(n);
-			return 0;
-			}
-		}
+	if (!(n = do_subject(subject, chtype)))
+		return 0;
 
 	if (!X509_REQ_set_subject_name(req, n))
+		{
+		X509_NAME_free(n);
 		return 0;
+		}
 	X509_NAME_free(n);
 	return 1;
 }

apps/rsa.c

@@ -79,6 +79,9 @@
  * -des		- encrypt output if PEM format with DES in cbc mode
  * -des3	- encrypt output if PEM format
  * -idea	- encrypt output if PEM format
+ * -aes128	- encrypt output if PEM format
+ * -aes192	- encrypt output if PEM format
+ * -aes256	- encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the RSA key modulus
  * -check	- verify key consistency
@@ -110,6 +113,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -195,6 +201,10 @@ bad:
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt PEM output with cbc idea\n");
+#endif
+#ifndef OPENSSL_NO_AES
+		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");

apps/rsautl.c

@@ -104,6 +104,9 @@ int MAIN(int argc, char **argv)
 	argv++;
 
 	if(!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
 	ERR_load_crypto_strings();
 	OpenSSL_add_all_algorithms();
 	pad = RSA_PKCS1_PADDING;

apps/s_cb.c

@@ -239,16 +239,18 @@ long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp, int argi,
 
 	if (cmd == (BIO_CB_READ|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"read from %08X [%08lX] (%d bytes => %ld (0x%X))\n",
+		BIO_printf(out,"read from %08X [%08lX] (%d bytes => %ld (0x%X))\n\n",
 			bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
+		BIO_printf(out,"\n");
 		return(ret);
 		}
 	else if (cmd == (BIO_CB_WRITE|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"write to %08X [%08lX] (%d bytes => %ld (0x%X))\n",
+		BIO_printf(out,"write to %08X [%08lX] (%d bytes => %ld (0x%X))\n\n",
 			bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
+		BIO_printf(out,"\n");
 		}
 	return(ret);
 	}
@@ -266,7 +268,7 @@ void MS_CALLBACK apps_ssl_info_callback(const SSL *s, int where, int ret)
 
 	if (where & SSL_CB_LOOP)
 		{
-		BIO_printf(bio_err,"%s:%s\n",str,SSL_state_string_long(s));
+		BIO_printf(bio_err,"%s:%s\n\n",str,SSL_state_string_long(s));
 		}
 	else if (where & SSL_CB_ALERT)
 		{

apps/s_client.c

@@ -141,6 +141,10 @@ typedef unsigned int u_int;
 #endif
 
 
+#ifdef OPENSSL_SYS_VMS
+#include "term_sock.h"
+#endif
+      
 #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
 /* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
 #undef FIONBIO
@@ -251,6 +255,10 @@ int MAIN(int argc, char **argv)
 #ifdef OPENSSL_SYS_WINDOWS
 	struct timeval tv;
 #endif
+#ifdef OPENSSL_SYS_VMS
+        int stdin_sock;
+        TerminalSocket (TERM_SOCK_CREATE, &stdin_sock);
+#endif
 
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 	meth=SSLv23_client_method();
@@ -271,6 +279,9 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	if (	((cbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
 		((sbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
 		((mbuf=OPENSSL_malloc(BUFSIZZ)) == NULL))
@@ -433,10 +444,10 @@ bad:
 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
 		{
-		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
+		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n\n");
 		}
 	if (inrand != NULL)
-		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
+		BIO_printf(bio_err,"%ld semi-random bytes loaded\n\n",
 			app_RAND_load_files(inrand));
 
 	if (bio_c_out == NULL)
@@ -513,7 +524,7 @@ re_start:
 		SHUTDOWN(s);
 		goto end;
 		}
-	BIO_printf(bio_c_out,"CONNECTED(%08X)\n",s);
+	BIO_printf(bio_c_out,"CONNECTED(%08X)\n\n",s);
 
 #ifdef FIONBIO
 	if (c_nbio)
@@ -554,6 +565,11 @@ re_start:
 	SSL_set_connect_state(con);
 
 	/* ok, lets connect */
+#ifdef OPENSSL_SYS_VMS
+        if (stdin_sock > SSL_get_fd(con))
+            width=stdin_sock+1;
+        else
+#endif
 	width=SSL_get_fd(con)+1;
 
 	read_tty=1;
@@ -620,8 +636,12 @@ re_start:
 #ifndef OPENSSL_SYS_WINDOWS
 			if (tty_on)
 				{
-				if (read_tty)  FD_SET(fileno(stdin),&readfds);
-				if (write_tty) FD_SET(fileno(stdout),&writefds);
+#ifdef OPENSSL_SYS_VMS
+                                if (read_tty)  FD_SET(stdin_sock,&readfds);
+#else
+                                if (read_tty)  FD_SET(fileno(stdin),&readfds);
+                                if (write_tty) FD_SET(fileno(stdout),&writefds);
+#endif
 				}
 			if (read_ssl)
 				FD_SET(SSL_get_fd(con),&readfds);
@@ -743,7 +763,7 @@ re_start:
 				goto shut;
 				}
 			}
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_VMS)
 		/* Assume Windows can always write */
 		else if (!ssl_pending && write_tty)
 #else
@@ -802,7 +822,7 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				read_tty=0;
 				break;
 			case SSL_ERROR_WANT_READ:
-				BIO_printf(bio_c_out,"read R BLOCK\n");
+				BIO_printf(bio_c_out,"read R BLOCK\n\n");
 				write_tty=0;
 				read_ssl=1;
 				if ((read_tty == 0) && (write_ssl == 0))
@@ -827,14 +847,22 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 #ifdef OPENSSL_SYS_WINDOWS
 		else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
 #else
-		else if (FD_ISSET(fileno(stdin),&readfds))
+#ifdef OPENSSL_SYS_VMS
+                else if (FD_ISSET(stdin_sock,&readfds))
+#else
+                else if (FD_ISSET(fileno(stdin),&readfds))
+#endif
 #endif
 			{
 			if (crlf)
 				{
 				int j, lf_num;
 
-				i=read(fileno(stdin),cbuf,BUFSIZZ/2);
+#ifdef OPENSSL_SYS_VMS
+                                i=recv(stdin_sock,cbuf,BUFSIZZ/2,0);
+#else
+                                i=read(fileno(stdin),cbuf,BUFSIZZ/2);
+#endif
 				lf_num = 0;
 				/* both loops are skipped when i <= 0 */
 				for (j = 0; j < i; j++)
@@ -853,7 +881,11 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				assert(lf_num == 0);
 				}
 			else
-				i=read(fileno(stdin),cbuf,BUFSIZZ);
+#ifdef OPENSSL_SYS_VMS
+                                i=recv(stdin_sock,cbuf,BUFSIZZ,0);
+#else
+                                i=read(fileno(stdin),cbuf,BUFSIZZ);
+#endif
 
 			if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q')))
 				{
@@ -898,6 +930,9 @@ end:
 		bio_c_out=NULL;
 		}
 	apps_shutdown();
+#ifdef OPENSSL_SYS_VMS
+        TerminalSocket (TERM_SOCK_DELETE, &stdin_sock);
+#endif
 	EXIT(ret);
 	}
 
@@ -931,7 +966,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 				BIO_printf(bio,"%2d s:%s\n",i,buf);
 				X509_NAME_oneline(X509_get_issuer_name(
 					sk_X509_value(sk,i)),buf,BUFSIZ);
-				BIO_printf(bio,"   i:%s\n",buf);
+				BIO_printf(bio,"   i:%s\n\n",buf);
 				if (c_showcerts)
 					PEM_write_bio_X509(bio,sk_X509_value(sk,i));
 				}
@@ -1005,7 +1040,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 		}
 	BIO_printf(bio,((s->hit)?"---\nReused, ":"---\nNew, "));
 	c=SSL_get_current_cipher(s);
-	BIO_printf(bio,"%s, Cipher is %s\n",
+	BIO_printf(bio,"%s, Cipher is %s\n\n",
 		SSL_CIPHER_get_version(c),
 		SSL_CIPHER_get_name(c));
 	if (peer != NULL) {
@@ -1016,7 +1051,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 		EVP_PKEY_free(pktmp);
 	}
 	SSL_SESSION_print(bio,SSL_get_session(s));
-	BIO_printf(bio,"---\n");
+	BIO_printf(bio,"---\n\n");
 	if (peer != NULL)
 		X509_free(peer);
 	/* flush, or debugging output gets mixed with http response */

apps/s_server.c

@@ -144,6 +144,10 @@ typedef unsigned int u_int;
 #include <conio.h>
 #endif
 
+#ifdef OPENSSL_SYS_VMS
+#include "term_sock.h"
+#endif
+       
 #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
 /* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
 #undef FIONBIO
@@ -504,6 +508,9 @@ int MAIN(int argc, char *argv[])
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	verify_depth=0;
 #ifdef FIONBIO
 	s_nbio=0;
@@ -824,7 +831,7 @@ bad:
 			goto end;
 			}
 		RSA_free(rsa);
-		BIO_printf(bio_s_out,"\n");
+		BIO_printf(bio_s_out,"\n\n");
 		}
 #endif
 #endif
@@ -880,7 +887,7 @@ static void print_stats(BIO *bio, SSL_CTX *ssl_ctx)
 	BIO_printf(bio,"%4d session cache misses\n",SSL_CTX_sess_misses(ssl_ctx));
 	BIO_printf(bio,"%4d session cache timeouts\n",SSL_CTX_sess_timeouts(ssl_ctx));
 	BIO_printf(bio,"%4d callback cache hits\n",SSL_CTX_sess_cb_hits(ssl_ctx));
-	BIO_printf(bio,"%4d cache full overflows (%d allowed)\n",
+	BIO_printf(bio,"%4d cache full overflows (%d allowed)\n\n",
 		SSL_CTX_sess_cache_full(ssl_ctx),
 		SSL_CTX_sess_get_cache_size(ssl_ctx));
 	}
@@ -897,7 +904,12 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 #ifdef OPENSSL_SYS_WINDOWS
 	struct timeval tv;
 #endif
+#ifdef OPENSSL_SYS_VMS
+        int stdin_sock;
 
+        TerminalSocket (TERM_SOCK_CREATE, &stdin_sock);
+#endif
+         
 	if ((buf=OPENSSL_malloc(bufsize)) == NULL)
 		{
 		BIO_printf(bio_err,"out of memory\n");
@@ -956,7 +968,12 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		SSL_set_msg_callback_arg(con, bio_s_out);
 		}
 
-	width=s+1;
+#ifdef OPENSSL_SYS_VMS
+        if (stdin_sock > s)
+            width = stdin_sock + 1;
+        else
+#endif
+        width=s+1;
 	for (;;)
 		{
 		int read_from_terminal;
@@ -969,7 +986,11 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 			{
 			FD_ZERO(&readfds);
 #ifndef OPENSSL_SYS_WINDOWS
+#ifdef OPENSSL_SYS_VMS
+                        FD_SET(stdin_sock,&readfds);
+#else
 			FD_SET(fileno(stdin),&readfds);
+#endif
 #endif
 			FD_SET(s,&readfds);
 			/* Note: under VMS with SOCKETSHR the second parameter is
@@ -993,8 +1014,12 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 #else
 			i=select(width,(void *)&readfds,NULL,NULL,NULL);
 			if (i <= 0) continue;
-			if (FD_ISSET(fileno(stdin),&readfds))
-				read_from_terminal = 1;
+#ifdef OPENSSL_SYS_VMS
+                        if (FD_ISSET(stdin_sock,&readfds))
+#else
+                        if (FD_ISSET(fileno(stdin),&readfds))
+#endif
+                                read_from_terminal = 1;
 #endif
 			if (FD_ISSET(s,&readfds))
 				read_from_sslcon = 1;
@@ -1005,7 +1030,11 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 				{
 				int j, lf_num;
 
-				i=read(fileno(stdin), buf, bufsize/2);
+#ifdef OPENSSL_SYS_VMS
+                                i=recv(stdin_sock, buf, bufsize/2, 0);
+#else
+                                i=read(fileno(stdin), buf, bufsize/2);
+#endif
 				lf_num = 0;
 				/* both loops are skipped when i <= 0 */
 				for (j = 0; j < i; j++)
@@ -1024,7 +1053,11 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 				assert(lf_num == 0);
 				}
 			else
-				i=read(fileno(stdin),buf,bufsize);
+#ifdef OPENSSL_SYS_VMS
+                                i=recv(stdin_sock,buf,bufsize, 0);
+#else
+                                i=read(fileno(stdin),buf,bufsize);
+#endif
 			if (!s_quiet)
 				{
 				if ((i <= 0) || (buf[0] == 'Q'))
@@ -1093,7 +1126,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 				case SSL_ERROR_WANT_WRITE:
 				case SSL_ERROR_WANT_READ:
 				case SSL_ERROR_WANT_X509_LOOKUP:
-					BIO_printf(bio_s_out,"Write BLOCK\n");
+					BIO_printf(bio_s_out,"Write BLOCK\n\n");
 					break;
 				case SSL_ERROR_SYSCALL:
 				case SSL_ERROR_SSL:
@@ -1103,7 +1136,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 					goto err;
 					/* break; */
 				case SSL_ERROR_ZERO_RETURN:
-					BIO_printf(bio_s_out,"DONE\n");
+					BIO_printf(bio_s_out,"DONE\n\n");
 					ret=1;
 					goto err;
 					}
@@ -1141,12 +1174,13 @@ again:
 #endif
 					write(fileno(stdout),buf,
 						(unsigned int)i);
+					BIO_printf(bio_s_out,"\n");
 					if (SSL_pending(con)) goto again;
 					break;
 				case SSL_ERROR_WANT_WRITE:
 				case SSL_ERROR_WANT_READ:
 				case SSL_ERROR_WANT_X509_LOOKUP:
-					BIO_printf(bio_s_out,"Read BLOCK\n");
+					BIO_printf(bio_s_out,"Read BLOCK\n\n");
 					break;
 				case SSL_ERROR_SYSCALL:
 				case SSL_ERROR_SSL:
@@ -1178,6 +1212,9 @@ err:
 		}
 	if (ret >= 0)
 		BIO_printf(bio_s_out,"ACCEPT\n");
+#ifdef OPENSSL_SYS_VMS
+        TerminalSocket (TERM_SOCK_DELETE, &stdin_sock);
+#endif
 	return(ret);
 	}
 
@@ -1235,7 +1272,7 @@ static int init_ssl_connection(SSL *con)
 	if (SSL_get_shared_ciphers(con,buf,BUFSIZ) != NULL)
 		BIO_printf(bio_s_out,"Shared ciphers:%s\n",buf);
 	str=SSL_CIPHER_get_name(SSL_get_current_cipher(con));
-	BIO_printf(bio_s_out,"CIPHER is %s\n",(str != NULL)?str:"(NONE)");
+	BIO_printf(bio_s_out,"CIPHER is %s\n\n",(str != NULL)?str:"(NONE)");
 	if (con->hit) BIO_printf(bio_s_out,"Reused session-id\n");
 	if (SSL_ctrl(con,SSL_CTRL_GET_FLAGS,0,NULL) &
 		TLS1_FLAGS_TLS_PADDING_BUG)
@@ -1391,7 +1428,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 				}
 			else
 				{
-				BIO_printf(bio_s_out,"read R BLOCK\n");
+				BIO_printf(bio_s_out,"read R BLOCK\n\n");
 #ifndef OPENSSL_SYS_MSDOS
 				sleep(1);
 #endif
@@ -1617,7 +1654,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 							goto write_error;
 						else
 							{
-							BIO_printf(bio_s_out,"rwrite W BLOCK\n");
+							BIO_printf(bio_s_out,"rwrite W BLOCK\n\n");
 							}
 						}
 					else

apps/smime.c

@@ -109,6 +109,15 @@ int MAIN(int argc, char **argv)
 	args = argv + 1;
 	ret = 1;
 
+	apps_startup();
+
+	if (bio_err == NULL)
+		if ((bio_err = BIO_new(BIO_s_file())) != NULL)
+			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	while (!badarg && *args && *args[0] == '-') {
 		if (!strcmp (*args, "-encrypt")) operation = SMIME_ENCRYPT;
 		else if (!strcmp (*args, "-decrypt")) operation = SMIME_DECRYPT;
@@ -128,6 +137,14 @@ int MAIN(int argc, char **argv)
 				cipher = EVP_rc2_cbc();
 		else if (!strcmp (*args, "-rc2-64")) 
 				cipher = EVP_rc2_64_cbc();
+#endif
+#ifndef OPENSSL_NO_AES
+		else if (!strcmp(*args,"-aes128"))
+				cipher = EVP_aes_128_cbc();
+		else if (!strcmp(*args,"-aes192"))
+				cipher = EVP_aes_192_cbc();
+		else if (!strcmp(*args,"-aes256"))
+				cipher = EVP_aes_256_cbc();
 #endif
 		else if (!strcmp (*args, "-text")) 
 				flags |= PKCS7_TEXT;
@@ -283,6 +300,10 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-rc2-40        encrypt with RC2-40 (default)\n");
 		BIO_printf (bio_err, "-rc2-64        encrypt with RC2-64\n");
 		BIO_printf (bio_err, "-rc2-128       encrypt with RC2-128\n");
+#endif
+#ifndef OPENSSL_NO_AES
+		BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
+		BIO_printf (bio_err, "               encrypt PEM output with cbc aes\n");
 #endif
 		BIO_printf (bio_err, "-nointern      don't search certificates in message for signer\n");
 		BIO_printf (bio_err, "-nosigs        don't verify message signature\n");
@@ -450,7 +471,10 @@ int MAIN(int argc, char **argv)
 		p7 = PKCS7_encrypt(encerts, in, cipher, flags);
 	} else if(operation == SMIME_SIGN) {
 		p7 = PKCS7_sign(signer, key, other, in, flags);
-		BIO_reset(in);
+		if (BIO_reset(in) != 0 && (flags & PKCS7_DETACHED)) {
+		  BIO_printf(bio_err, "Can't rewind input file\n");
+		  goto end;
+		}
 	} else {
 		if(informat == FORMAT_SMIME) 
 			p7 = SMIME_read_PKCS7(in, &indata);
@@ -490,9 +514,9 @@ int MAIN(int argc, char **argv)
 	} else if(operation == SMIME_VERIFY) {
 		STACK_OF(X509) *signers;
 		if(PKCS7_verify(p7, other, store, indata, out, flags)) {
-			BIO_printf(bio_err, "Verification Successful\n");
+			BIO_printf(bio_err, "Verification successful\n");
 		} else {
-			BIO_printf(bio_err, "Verification Failure\n");
+			BIO_printf(bio_err, "Verification failure\n");
 			goto end;
 		}
 		signers = PKCS7_get0_signers(p7, other, flags);

apps/speed.c

@@ -131,7 +131,7 @@
 #endif
 
 #ifndef OPENSSL_NO_DES
-#include <openssl/des_old.h>
+#include <openssl/des.h>
 #endif
 #ifndef OPENSSL_NO_AES
 #include <openssl/aes.h>
@@ -374,9 +374,11 @@ int MAIN(int argc, char **argv)
 	int mret=1;
 	long count=0,save_count=0;
 	int i,j,k;
+#if !defined(OPENSSL_NO_RSA) || !defined(OPENSSL_NO_DSA)
+	long rsa_count;
+#endif
 #ifndef OPENSSL_NO_RSA
 	unsigned rsa_num;
-	long rsa_count;
 #endif
 	unsigned char md[EVP_MAX_MD_SIZE];
 #ifndef OPENSSL_NO_MD2
@@ -437,9 +439,9 @@ int MAIN(int argc, char **argv)
 	unsigned char iv[MAX_BLOCK_SIZE/8];
 #ifndef OPENSSL_NO_DES
 	DES_cblock *buf_as_des_cblock = NULL;
-	static des_cblock key ={0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
-	static des_cblock key2={0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12};
-	static des_cblock key3={0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34};
+	static DES_cblock key ={0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
+	static DES_cblock key2={0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12};
+	static DES_cblock key3={0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34};
 	DES_key_schedule sch;
 	DES_key_schedule sch2;
 	DES_key_schedule sch3;
@@ -515,6 +517,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 #ifndef OPENSSL_NO_RSA
 	memset(rsa_key,0,sizeof(rsa_key));
 	for (i=0; i<RSA_NUM; i++)
@@ -527,7 +532,7 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 #ifndef OPENSSL_NO_DES
-	buf_as_des_cblock = (des_cblock *)buf;
+	buf_as_des_cblock = (DES_cblock *)buf;
 #endif
 	if ((buf2=(unsigned char *)OPENSSL_malloc((int)BUFSIZE)) == NULL)
 		{
@@ -1136,7 +1141,7 @@ int MAIN(int argc, char **argv)
 
 		HMAC_CTX_init(&hctx);
 		HMAC_Init_ex(&hctx,(unsigned char *)"This is a key...",
-			16,EVP_md5());
+			16,EVP_md5(), NULL);
 
 		for (j=0; j<SIZE_NUM; j++)
 			{
@@ -1144,9 +1149,9 @@ int MAIN(int argc, char **argv)
 			Time_F(START);
 			for (count=0,run=1; COND(c[D_HMAC][j]); count++)
 				{
-				HMAC_Init_ex(&hctx,NULL,0,NULL);
-                                HMAC_Update(&hctx,buf,lengths[j]);
-                                HMAC_Final(&hctx,&(hmac[0]),NULL);
+				HMAC_Init_ex(&hctx,NULL,0,NULL,NULL);
+				HMAC_Update(&hctx,buf,lengths[j]);
+				HMAC_Final(&hctx,&(hmac[0]),NULL);
 				}
 			d=Time_F(STOP);
 			print_result(D_HMAC,j,count,d);
@@ -1598,7 +1603,7 @@ show_res:
 		printf("%s ",RC4_options());
 #endif
 #ifndef OPENSSL_NO_DES
-		printf("%s ",des_options());
+		printf("%s ",DES_options());
 #endif
 #ifndef OPENSSL_NO_AES
 		printf("%s ",AES_options());
@@ -1622,7 +1627,7 @@ show_res:
 #endif
 #ifdef HZ
 #define as_string(s) (#s)
-		printf("HZ=%g", HZ);
+		printf("HZ=%g", (double)HZ);
 # ifdef _SC_CLK_TCK
 		printf(" [sysconf value]");
 # endif

apps/spkac.c

@@ -98,6 +98,9 @@ int MAIN(int argc, char **argv)
 
 	if (!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	prog=argv[0];
 	argc--;
 	argv++;

apps/term_sock.c

@@ -0,0 +1,581 @@
+#ifdef VMS
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <inet.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+#include <starlet.h>
+#include <iodef.h>
+#ifdef __alpha
+#include <iosbdef.h>
+#else
+typedef struct _iosb {			/* Copied from IOSBDEF.H for Alpha  */
+#pragma __nomember_alignment
+    __union  {
+        __struct  {
+            unsigned short int iosb$w_status; /* Final I/O status           */
+            __union  {
+                __struct  {             /* 16-bit byte count variant        */
+                    unsigned short int iosb$w_bcnt; /* 16-bit byte count    */
+                    __union  {
+                        unsigned int iosb$l_dev_depend; /* 32-bit device dependent info */
+                        unsigned int iosb$l_pid; /* 32-bit pid              */
+                        } iosb$r_l;
+                    } iosb$r_bcnt_16;
+                __struct  {             /* 32-bit byte count variant        */
+                    unsigned int iosb$l_bcnt; /* 32-bit byte count (unaligned) */
+                    unsigned short int iosb$w_dev_depend_high; /* 16-bit device dependent info */
+                    } iosb$r_bcnt_32;
+                } iosb$r_devdepend;
+            } iosb$r_io_64;
+        __struct  {
+            __union  {
+                unsigned int iosb$l_getxxi_status; /* Final GETxxI status   */
+                unsigned int iosb$l_reg_status; /* Final $Registry status   */
+                } iosb$r_l_status;
+            unsigned int iosb$l_reserved; /* Reserved field                 */
+            } iosb$r_get_64;
+        } iosb$r_io_get;
+    } IOSB;
+
+#if !defined(__VAXC)
+#define iosb$w_status iosb$r_io_get.iosb$r_io_64.iosb$w_status
+#define iosb$w_bcnt iosb$r_io_get.iosb$r_io_64.iosb$r_devdepend.iosb$r_bcnt_16.iosb$w_bcnt
+#define iosb$r_l        iosb$r_io_get.iosb$r_io_64.iosb$r_devdepend.iosb$r_bcnt_16.iosb$r_l
+#define iosb$l_dev_depend iosb$r_l.iosb$l_dev_depend
+#define iosb$l_pid iosb$r_l.iosb$l_pid
+#define iosb$l_bcnt iosb$r_io_get.iosb$r_io_64.iosb$r_devdepend.iosb$r_bcnt_32.iosb$l_bcnt
+#define iosb$w_dev_depend_high iosb$r_io_get.iosb$r_io_64.iosb$r_devdepend.iosb$r_bcnt_32.iosb$w_dev_depend_high
+#define iosb$l_getxxi_status iosb$r_io_get.iosb$r_get_64.iosb$r_l_status.iosb$l_getxxi_status
+#define iosb$l_reg_status iosb$r_io_get.iosb$r_get_64.iosb$r_l_status.iosb$l_reg_status
+#endif          /* #if !defined(__VAXC) */
+
+#endif					/* End of IOSBDEF */
+
+#include <efndef.h>
+#include <stdlib.h>
+#include <ssdef.h>
+#include <time.h>
+#include <stdarg.h>
+#include <descrip.h>
+
+#include "term_sock.h"
+
+#ifdef __alpha
+static struct _iosb TerminalDeviceIosb;
+#else
+IOSB TerminalDeviceIosb;
+#endif
+
+static char TerminalDeviceBuff[255 + 2];
+static int TerminalSocketPair[2] = {0, 0};
+static unsigned short TerminalDeviceChan = 0;
+
+static int CreateSocketPair (int, int, int, int *);
+static void SocketPairTimeoutAst (int);
+static int TerminalDeviceAst (int);
+static void LogMessage (char *, ...);
+
+/*
+** Socket Pair Timeout Value (must be 0-59 seconds)
+*/
+#define SOCKET_PAIR_TIMEOUT_VALUE 20
+
+/*
+** Socket Pair Timeout Block which is passed to timeout AST
+*/
+typedef struct _SocketPairTimeoutBlock {
+    unsigned short SockChan1;
+    unsigned short SockChan2;
+    } SPTB;
+
+#ifdef TERM_SOCK_TEST
+
+/*----------------------------------------------------------------------------*/
+/*                                                                            */
+/*----------------------------------------------------------------------------*/
+int main (int argc, char *argv[], char *envp[])
+{
+char TermBuff[80];
+int TermSock,
+    status,
+    len;
+
+LogMessage ("Enter 'q' or 'Q' to quit ...");
+while (strcasecmp (TermBuff, "Q"))
+    {
+    /*
+    ** Create the terminal socket
+    */
+    status = TerminalSocket (TERM_SOCK_CREATE, &TermSock);
+    if (status != TERM_SOCK_SUCCESS)
+	exit (1);
+
+    /*
+    ** Process the terminal input
+    */
+    LogMessage ("Waiting on terminal I/O ...\n");
+    len = recv (TermSock, TermBuff, sizeof (TermBuff), 0) ;
+    TermBuff[len] = '\0';
+    LogMessage ("Received terminal I/O [%s]", TermBuff);
+
+    /*
+    ** Delete the terminal socket
+    */
+    status = TerminalSocket (TERM_SOCK_DELETE, &TermSock);
+    if (status != TERM_SOCK_SUCCESS)
+	exit (1);
+    }
+
+return 1;
+
+}
+#endif 
+
+/*----------------------------------------------------------------------------*/
+/*                                                                            */
+/*----------------------------------------------------------------------------*/
+int TerminalSocket (int FunctionCode, int *ReturnSocket)
+{
+int status;
+$DESCRIPTOR (TerminalDeviceDesc, "SYS$COMMAND");
+
+/*
+** Process the requested function code
+*/
+switch (FunctionCode)
+   {
+   case TERM_SOCK_CREATE:
+	/*
+	** Create a socket pair
+	*/
+	status = CreateSocketPair (AF_INET, SOCK_STREAM, 0, TerminalSocketPair);
+	if (status == -1)
+	    {
+	    LogMessage ("TerminalSocket: CreateSocketPair () - %08X", status);
+	    if (TerminalSocketPair[0])
+		close (TerminalSocketPair[0]);
+	    if (TerminalSocketPair[1])
+		close (TerminalSocketPair[1]);
+	    return (TERM_SOCK_FAILURE);
+	    }
+
+	/*
+	** Assign a channel to the terminal device
+	*/
+	status = sys$assign (&TerminalDeviceDesc,
+			     &TerminalDeviceChan, 
+			     0, 0, 0);
+	if (! (status & 1))
+	    {
+	    LogMessage ("TerminalSocket: SYS$ASSIGN () - %08X", status);
+	    close (TerminalSocketPair[0]);
+	    close (TerminalSocketPair[1]);
+	    return (TERM_SOCK_FAILURE);
+	    }
+
+	/*
+	** Queue an async IO to the terminal device
+	*/
+	status = sys$qio (EFN$C_ENF,
+			  TerminalDeviceChan,
+	                  IO$_READVBLK,
+	                  &TerminalDeviceIosb, 
+			  TerminalDeviceAst, 
+			  0, 
+	                  TerminalDeviceBuff,
+	                  sizeof (TerminalDeviceBuff) - 2,
+	                  0, 0, 0, 0);
+	if (! (status & 1))
+	    {
+	    LogMessage ("TerminalSocket: SYS$QIO () - %08X", status);
+	    close (TerminalSocketPair[0]);
+	    close (TerminalSocketPair[1]);
+	    return (TERM_SOCK_FAILURE);
+	    }
+
+	/*
+	** Return the input side of the socket pair
+	*/
+	*ReturnSocket = TerminalSocketPair[1];
+        break;
+
+   case TERM_SOCK_DELETE:
+	/*
+	** Cancel any pending IO on the terminal channel
+	*/
+	status = sys$cancel (TerminalDeviceChan);
+	if (! (status & 1))
+	    {
+	    LogMessage ("TerminalSocket: SYS$CANCEL () - %08X", status);
+	    close (TerminalSocketPair[0]);
+	    close (TerminalSocketPair[1]);
+	    return (TERM_SOCK_FAILURE);
+	    }
+
+	/*
+	** Deassign the terminal channel
+	*/
+	status = sys$dassgn (TerminalDeviceChan);
+	if (! (status & 1))
+	    {
+	    LogMessage ("TerminalSocket: SYS$DASSGN () - %08X", status);
+	    close (TerminalSocketPair[0]);
+	    close (TerminalSocketPair[1]);
+	    return (TERM_SOCK_FAILURE);
+	    }
+
+	/*
+	** Close the terminal socket pair
+	*/
+	close (TerminalSocketPair[0]);
+	close (TerminalSocketPair[1]);
+
+	/*
+	** Return the initialized socket
+	*/
+	*ReturnSocket = 0;
+	break;
+
+    default:
+	/*
+	** Invalid function code
+	*/
+	LogMessage ("TerminalSocket: Invalid Function Code - %d", FunctionCode);
+	return (TERM_SOCK_FAILURE);
+	break;
+    }	
+
+/*
+** Return success
+*/
+return (TERM_SOCK_SUCCESS);
+
+}
+
+/*----------------------------------------------------------------------------*/
+/*                                                                            */
+/*----------------------------------------------------------------------------*/
+static int CreateSocketPair (
+    int		SocketFamily,
+    int		SocketType,
+    int		SocketProtocol,
+    int		*SocketPair)
+{
+struct dsc$descriptor AscTimeDesc = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, NULL};
+static const char* LocalHostAddr = {"127.0.0.1"};
+unsigned short TcpAcceptChan = 0,
+	       TcpDeviceChan = 0;
+unsigned long BinTimeBuff[2];
+struct sockaddr_in sin;
+char AscTimeBuff[32];
+short LocalHostPort;
+unsigned int status,
+	     slen;
+
+#ifdef __alpha
+struct _iosb iosb;
+#else
+IOSB iosb;
+#endif
+
+int SockDesc1 = 0,
+    SockDesc2 = 0;
+SPTB sptb;
+$DESCRIPTOR (TcpDeviceDesc, "TCPIP$DEVICE");
+
+/*
+** Create a socket
+*/
+SockDesc1 = socket (SocketFamily, SocketType, 0);
+if (SockDesc1 < 0)
+    {
+    LogMessage ("CreateSocketPair: socket () - %d", errno);
+    return (-1);
+    }
+
+/*
+** Initialize the socket information
+*/
+slen = sizeof (sin);
+memset ((char *) &sin, 0, slen);
+sin.sin_family = SocketFamily;
+sin.sin_addr.s_addr = inet_addr (LocalHostAddr);
+sin.sin_port = 0;
+
+/*
+** Bind the socket to the local IP
+*/
+status = bind (SockDesc1, (struct sockaddr *) &sin, slen);
+if (status < 0)
+    {
+    LogMessage ("CreateSocketPair: bind () - %d", errno);
+    close (SockDesc1);   
+    return (-1);
+    }
+
+/*
+** Get the socket name so we can save the port number
+*/
+status = getsockname (SockDesc1, (struct sockaddr *) &sin, &slen);
+if (status < 0)
+    {
+    LogMessage ("CreateSocketPair: getsockname () - %d", errno);
+    close (SockDesc1); 
+    return (-1);
+    }
+else
+    LocalHostPort = sin.sin_port;			
+
+/*
+** Setup a listen for the socket
+*/
+listen (SockDesc1, 5);
+
+/*
+** Get the binary (64-bit) time of the specified timeout value
+*/
+sprintf (AscTimeBuff, "0 0:0:%02d.00", SOCKET_PAIR_TIMEOUT_VALUE);
+AscTimeDesc.dsc$w_length = strlen (AscTimeBuff);
+AscTimeDesc.dsc$a_pointer = AscTimeBuff;
+status = sys$bintim (&AscTimeDesc, BinTimeBuff);
+if (! (status & 1))
+    {
+    LogMessage ("CreateSocketPair: SYS$BINTIM () - %08X", status);
+    close (SockDesc1);
+    return (-1);
+    }
+
+/*
+** Assign another channel to the TCP/IP device for the accept.
+** This is the channel that ends up being connected to.
+*/
+status = sys$assign (&TcpDeviceDesc, &TcpDeviceChan, 0, 0, 0);
+if (! (status & 1))
+    {
+    LogMessage ("CreateSocketPair: SYS$ASSIGN () - %08X", status);
+    close (SockDesc1);
+    return (-1);
+    }
+
+/*
+** Get the channel of the first socket for the accept
+*/
+TcpAcceptChan = decc$get_sdc (SockDesc1);		
+
+/*
+** Perform the accept using $QIO so we can do this asynchronously
+*/
+status = sys$qio (EFN$C_ENF, 
+		  TcpAcceptChan,
+                  IO$_ACCESS | IO$M_ACCEPT,
+                  &iosb,
+		  0, 0, 0, 0, 0,
+                  &TcpDeviceChan,
+                  0, 0);
+if (! (status & 1))
+    {
+    LogMessage ("CreateSocketPair: SYS$QIO () - %08X", status);
+    close (SockDesc1);
+    sys$dassgn (TcpDeviceChan);
+    return (-1);
+    }
+
+/*
+** Create the second socket to do the connect
+*/
+SockDesc2 = socket (SocketFamily, SocketType, 0);
+if (SockDesc2 < 0)
+    {
+    LogMessage ("CreateSocketPair: socket () - %d", errno);
+    sys$cancel (TcpAcceptChan);
+    close (SockDesc1);
+    sys$dassgn (TcpDeviceChan);
+    return (-1) ;
+    } 
+
+/*
+** Setup the Socket Pair Timeout Block
+*/
+sptb.SockChan1 = TcpAcceptChan;
+sptb.SockChan2 = decc$get_sdc (SockDesc2);
+
+/*
+** Before we block on the connect, set a timer that can cancel I/O on our two 
+** sockets if it never connects.
+*/
+status = sys$setimr (EFN$C_ENF, 
+		     BinTimeBuff, 
+		     SocketPairTimeoutAst, 
+		     &sptb, 
+		     0);
+if (! (status & 1))
+    {
+    LogMessage ("CreateSocketPair: SYS$SETIMR () - %08X", status);
+    sys$cancel (TcpAcceptChan);
+    close (SockDesc1);
+    close (SockDesc2);
+    sys$dassgn (TcpDeviceChan);
+    return (-1);
+    }
+
+/*
+** Now issue the connect
+*/
+memset ((char *) &sin, 0, sizeof (sin)) ;
+sin.sin_family = SocketFamily;
+sin.sin_addr.s_addr = inet_addr (LocalHostAddr) ;
+sin.sin_port = LocalHostPort ;
+
+status = connect (SockDesc2, (struct sockaddr *) &sin, sizeof (sin));
+if (status < 0 )
+    {
+    LogMessage ("CreateSocketPair: connect () - %d", errno);
+    sys$cantim (&sptb, 0);
+    sys$cancel (TcpAcceptChan);
+    close (SockDesc1);
+    close (SockDesc2);
+    sys$dassgn (TcpDeviceChan);
+    return (-1);
+    }
+
+/*
+** Wait for the asynch $QIO to finish.  Note that if the I/O was aborted 
+** (SS$_ABORT), then we probably canceled it from the AST routine - so log a 
+** timeout.
+*/
+status = sys$synch (EFN$C_ENF, &iosb);
+if (! (iosb.iosb$w_status & 1))
+    {
+    if (iosb.iosb$w_status == SS$_ABORT)
+	LogMessage ("CreateSocketPair: SYS$QIO(iosb) timeout");
+    else 
+	{
+        LogMessage ("CreateSocketPair: SYS$QIO(iosb) - %d", iosb.iosb$w_status);
+        sys$cantim (&sptb, 0);
+        }
+    close (SockDesc1);
+    close (SockDesc2);
+    sys$dassgn (TcpDeviceChan);
+    return (-1);
+    }
+
+/*
+** Here we're successfully connected, so cancel the timer, convert the I/O 
+** channel to a socket fd, close the listener socket and return the connected 
+** pair.
+*/
+sys$cantim (&sptb, 0);
+
+close (SockDesc1) ;
+SocketPair[0] = SockDesc2 ;
+SocketPair[1] = socket_fd (TcpDeviceChan);
+
+return (0) ;
+
+}
+
+/*----------------------------------------------------------------------------*/
+/*                                                                            */
+/*----------------------------------------------------------------------------*/
+static void SocketPairTimeoutAst (int astparm)
+{
+SPTB *sptb = (SPTB *) astparm;
+
+sys$cancel (sptb->SockChan2);			/* Cancel the connect() */
+sys$cancel (sptb->SockChan1);			/* Cancel the accept() 	*/
+
+return;
+
+}
+
+/*----------------------------------------------------------------------------*/
+/*                                                                            */
+/*----------------------------------------------------------------------------*/
+static int TerminalDeviceAst (int astparm)
+{
+int status;
+
+/*
+** Terminate the terminal buffer
+*/
+TerminalDeviceBuff[TerminalDeviceIosb.iosb$w_bcnt] = '\0';
+strcat (TerminalDeviceBuff, "\n");
+
+/*
+** Send the data read from the terminal device throught the socket pair
+*/
+send (TerminalSocketPair[0], TerminalDeviceBuff, TerminalDeviceIosb.iosb$w_bcnt + 1, 0);
+
+/*
+** Queue another async IO to the terminal device
+*/
+status = sys$qio (EFN$C_ENF,
+         	  TerminalDeviceChan,
+         	  IO$_READVBLK,
+         	  &TerminalDeviceIosb, 
+	 	  TerminalDeviceAst, 
+	 	  0, 
+         	  TerminalDeviceBuff,
+         	  sizeof (TerminalDeviceBuff) - 1,
+         	  0, 0, 0, 0);
+
+/*
+** Return status
+*/
+return status;
+
+}
+
+/*----------------------------------------------------------------------------*/
+/*                                                                            */
+/*----------------------------------------------------------------------------*/
+static void LogMessage (char *msg, ...)
+{
+char *Month[] = {"Jan", "Feb", "Mar", "Apr", "May", "Jun", 
+                 "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
+static unsigned int pid = 0;
+va_list args;
+time_t CurTime;
+struct tm *LocTime;
+char MsgBuff[256];
+
+/*
+** Get the process pid
+*/
+if (pid == 0)
+    pid = getpid ();
+
+/*
+** Convert the current time into local time
+*/
+CurTime = time (NULL);
+LocTime = localtime (&CurTime);
+
+/*
+** Format the message buffer
+*/
+sprintf (MsgBuff, "%02d-%s-%04d %02d:%02d:%02d [%08X] %s\n",
+         LocTime->tm_mday, Month[LocTime->tm_mon], (LocTime->tm_year + 1900),
+         LocTime->tm_hour, LocTime->tm_min, LocTime->tm_sec, pid, msg);
+
+/*
+** Get any variable arguments and add them to the print of the message buffer 
+*/
+va_start (args, msg);
+vfprintf (stderr, MsgBuff, args);
+va_end (args);
+
+/*
+** Flush standard error output
+*/
+fsync (fileno (stderr));
+
+return;
+
+}
+#endif

apps/term_sock.h

@@ -0,0 +1,21 @@
+#ifndef TERM_SOCK_H
+#define TERM_SOCK_H
+
+/*
+** Terminal Socket Function Codes
+*/
+#define TERM_SOCK_CREATE	1
+#define TERM_SOCK_DELETE	2
+
+/*
+** Terminal Socket Status Codes
+*/
+#define TERM_SOCK_FAILURE	0
+#define TERM_SOCK_SUCCESS	1
+
+/*
+** Terminal Socket Prototype
+*/
+int TerminalSocket (int FunctionCode, int *ReturnSocket);
+
+#endif

apps/verify.c

@@ -100,6 +100,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	argc--;
 	argv++;
 	for (;;)

apps/version.c

@@ -122,7 +122,7 @@
 # include <openssl/rc4.h>
 #endif
 #ifndef OPENSSL_NO_DES
-# include <openssl/des_old.h>
+# include <openssl/des.h>
 #endif
 #ifndef OPENSSL_NO_IDEA
 # include <openssl/idea.h>
@@ -186,7 +186,7 @@ int MAIN(int argc, char **argv)
 		printf("%s ",RC4_options());
 #endif
 #ifndef OPENSSL_NO_DES
-		printf("%s ",des_options());
+		printf("%s ",DES_options());
 #endif
 #ifndef OPENSSL_NO_IDEA
 		printf("%s ",idea_options());

apps/x509.c

@@ -191,6 +191,9 @@ int MAIN(int argc, char **argv)
 
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
 	STDout=BIO_new_fp(stdout,BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
 	{

config

@@ -344,6 +344,13 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	exit 0
 	;;
 
+    *"CRAY T3E")
+       echo "t3e-cray-unicosmk"; exit 0;
+       ;;
+
+    *CRAY*)
+       echo "j90-cray-unicos"; exit 0;
+       ;;
 esac
 
 #
@@ -510,6 +517,10 @@ EOF
 	${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
 	rm dummy dummy.c
 	;;
+  ppc64-*-linux2)
+	#Use the standard target for PPC architecture until we create a
+	#special one for the 64bit architecture.
+	OUT="linux-ppc" ;;
   ppc-*-linux2) OUT="linux-ppc" ;;
   m68k-*-linux*) OUT="linux-m68k" ;;
   ia64-*-linux?) OUT="linux-ia64" ;;
@@ -613,9 +624,17 @@ EOF
   *86*-*-netbsd) OUT="NetBSD-x86" ;;
   sun3*-*-netbsd) OUT="NetBSD-m68" ;;
   *-*-netbsd) OUT="NetBSD-sparc" ;;
-  *86*-*-openbsd) OUT="OpenBSD-x86" ;;
   alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
+  *86*-*-openbsd) OUT="OpenBSD-i386" ;;
+  m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
+  m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
+  mips*-*-openbsd) OUT="OpenBSD-mips" ;;
   pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
+  powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
+  sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
+  sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
+  vax*-*-openbsd) OUT="OpenBSD-vax" ;;
+  hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
   *-*-openbsd) OUT="OpenBSD" ;;
   *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
   *-*-osf) OUT="alphaold-cc" ;;
@@ -680,6 +699,8 @@ EOF
   mips-sony-newsos4) OUT="newsos4-gcc" ;;
   *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
   *-*-cygwin) OUT="Cygwin" ;;
+  t3e-cray-unicosmk) OUT="cray-t3e" ;;
+  j90-cray-unicos) OUT="cray-j90" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 

cpq-axpvms-ssl-t0100--1.pcsi$desc

@@ -0,0 +1,259 @@
+--
+--      CPQ-AXPVMS-SSL-T0100--1.PCSI$DESCRIPTION
+--
+--      KSG00141     Kevin Greaney		21-Jun-2001
+--	Using the ENCRYPT file as a template, create a 
+--	.PCSI$DESCRIPTION file for the OpenSSL port.
+--
+--
+--  First, make sure we are running on correct operating system.
+--
+product CPQ AXPVMS SSL T1.0 full ;
+    if (not <software DEC AXPVMS VMS version minimum V7.2>) ;
+        error NOAXPVMS;
+    end if;
+
+--
+--  Now, perform the installation.
+--
+--
+-- Define the SSL root logical name.  This is done by
+-- SSL$PCSI.COM.  It defines SSL$ROOT to be the 
+-- equivalence name of the PCSI$DESTINATION logical when
+-- installing, and deassigns the logical when removing.
+
+    execute 
+	install "@pcsi$destination:[ssl.com]ssl$pcsi.com install" 
+	remove "@pcsi$destination:[ssl.com]ssl$pcsi.com remove";
+
+--
+-- SSL$STARTUP.COM defines a handfull of logicals and
+-- then executes SSL$SYSTARTUP.COM.
+--
+-- SSL$SHUTDOWN deassigns the logicals defined in the
+-- startup file and then executes SSL$SYSHUTDOWN.COM 
+--
+-- Note : If this kit is installed to a disk other than
+--	  the system disk, these two files will not end
+--	  up on the system disk.  They will have to be
+--	  moved over manually.
+
+    execute 
+	start "@sys$startup:ssl$startup.com" 
+	stop "@sys$startup:ssl$shutdown.com";
+
+--
+--  Now, perform the testing, if it was requested.
+--
+-- Find out if the IVP should be run ...
+-- Note : If the user specified /NOTEST on the command
+--        line, the user will still be asked about running
+--	  the IVP, but no matter what they answer, the IVP
+--	  will NOT be run.  This is because /NOTEST
+--	  overrides the option here.
+
+    option run_ivp default yes;
+       execute test "@pcsi$destination:[systest]ssl$ivp.com/output=pcsi$destination:[systest]ssl$ivp.log";
+    end option;
+--
+    information POST_INSTALL phase after with helptext;
+    information RELEASE_NOTES phase after ;
+    information START_INSTRUCTION phase after ;
+--    information REINSTALL_PROBLEM phase after ;
+
+--
+--  And finally, define where all the files should be placed.
+--
+    directory [ssl] ;
+    file [ssl.com]ssl$pcsi.com protection private;
+--
+    file [syshlp]ssl010.release_notes release notes;
+
+    if (<software DEC AXPVMS VMS>) ;
+       directory [ssl.alpha_exe] ;
+
+       file [ssl.alpha_exe]ca.com ;
+       file [ssl.alpha_exe]openssl.exe ;
+       file [ssl.alpha_exe]ssl_task.exe ;
+--
+    end if;
+
+    if (<software DEC VAXVMS VMS>) ;
+       directory [ssl.vax_exe] ;
+       file [ssl.vax_exe]ca.com;
+--
+       directory [ssl.vax_lib] ;
+
+    end if;
+
+    file [syslib]ssl$libssl_shr.exe ;    
+    file [syslib]ssl$libcrypto_shr.exe ;    
+
+    file [syslib]ssl$libssl_shr32.exe ;    
+    file [syslib]ssl$libcrypto_shr32.exe ;    
+
+    file [ssl.alpha_exe]ssl$hostname.exe;
+    file [ssl.alpha_exe]ssl$hostaddr.exe;
+--
+    directory [ssl.conf] ;
+
+    file [ssl]openssl.cnf ;
+    file [ssl]openssl-vms.cnf ;
+
+--
+    directory [ssl.certs] ;
+--
+    directory [syshlp.examples.ssl] ;
+
+    file [syshlp.examples.ssl]ssl$bio_cli.c ;
+    file [syshlp.examples.ssl]ssl$bio_serv.c ;
+    file [syshlp.examples.ssl]ssl$cli_sess_renego.c ;
+    file [syshlp.examples.ssl]ssl$cli_sess_renego_cli_ver.c ;
+    file [syshlp.examples.ssl]ssl$cli_sess_reuse.c ;
+    file [syshlp.examples.ssl]ssl$cli_sess_reuse_cli_ver.c ;
+    file [syshlp.examples.ssl]ssl$cli_verify_client.c ;
+    file [syshlp.examples.ssl]ssl$serv_sess_renego.c ;
+    file [syshlp.examples.ssl]ssl$serv_sess_renego_cli_ver.c ;
+    file [syshlp.examples.ssl]ssl$serv_sess_reuse.c ;
+    file [syshlp.examples.ssl]ssl$serv_sess_reuse_cli_ver.c ;
+    file [syshlp.examples.ssl]ssl$serv_verify_client.c ;
+    file [syshlp.examples.ssl]ssl$simple_cli.c ;
+    file [syshlp.examples.ssl]ssl$simple_serv.c ;
+    file [syshlp.examples.ssl]ssl$examples_setup.com ;
+
+--
+    directory [ssl.include] ;
+--
+    file [ssl.include]asn1.h ;
+    file [ssl.include]asn1_mac.h;
+    file [ssl.include]bio.h;
+    file [ssl.include]blowfish.h;
+    file [ssl.include]bn.h;
+    file [ssl.include]buffer.h;
+    file [ssl.include]cast.h;
+    file [ssl.include]comp.h;
+    file [ssl.include]conf.h;
+    file [ssl.include]conf_api.h;
+    file [ssl.include]crypto.h;
+    file [ssl.include]des.h;
+    file [ssl.include]dh.h;
+    file [ssl.include]dsa.h;
+    file [ssl.include]dso.h;
+    file [ssl.include]ebcdic.h;
+    file [ssl.include]engine.h;
+    file [ssl.include]err.h;
+    file [ssl.include]evp.h;
+    file [ssl.include]e_os.h;
+    file [ssl.include]e_os2.h;
+    file [ssl.include]hmac.h;
+    file [ssl.include]idea.h;
+    file [ssl.include]lhash.h;
+    file [ssl.include]md2.h;
+    file [ssl.include]md4.h;
+    file [ssl.include]md5.h;
+    file [ssl.include]mdc2.h;
+    file [ssl.include]objects.h;
+    file [ssl.include]obj_mac.h;
+    file [ssl.include]opensslconf.h;
+    file [ssl.include]opensslv.h;
+    file [ssl.include]pem.h;
+    file [ssl.include]pem2.h;
+    file [ssl.include]pkcs12.h;
+    file [ssl.include]pkcs7.h;
+    file [ssl.include]rand.h;
+    file [ssl.include]rc2.h;
+    file [ssl.include]rc4.h;
+    file [ssl.include]rc5.h;
+    file [ssl.include]ripemd.h;
+    file [ssl.include]rsa.h;
+    file [ssl.include]safestack.h;
+    file [ssl.include]sha.h;
+    file [ssl.include]ssl.h;
+    file [ssl.include]ssl2.h;
+    file [ssl.include]ssl23.h;
+    file [ssl.include]ssl3.h;
+    file [ssl.include]stack.h;
+    file [ssl.include]symhacks.h;
+    file [ssl.include]tls1.h;
+    file [ssl.include]tmdiff.h;
+    file [ssl.include]txt_db.h;
+    file [ssl.include]x509.h;
+    file [ssl.include]x509v3.h;
+    file [ssl.include]x509_vfy.h;
+--
+    directory [ssl.lib] ;
+--
+    directory [ssl.private] ;
+
+    file [ssl.private]randfile.;
+--
+    directory [ssl.test] ;
+
+    file [ssl.test]tcrl.com;
+    file [ssl.test]testca.com; 
+    file [ssl.test]testenc.com; 
+    file [ssl.test]testgen.com; 
+    file [ssl.test]testss.com; 
+    file [ssl.test]testssl.com; 
+    file [ssl.test]tests_share.com; 
+    file [ssl.test]tpkcs7.com; 
+    file [ssl.test]tpkcs7d.com; 
+    file [ssl.test]treq.com; 
+    file [ssl.test]trsa.com; 
+    file [ssl.test]tsid.com; 
+    file [ssl.test]tverify.com; 
+    file [ssl.test]tx509.com;
+--
+    file [ssl.test]bftest.exe; 
+    file [ssl.test]bntest.exe; 
+    file [ssl.test]casttest.exe; 
+    file [ssl.test]destest.exe;
+    file [ssl.test]dhtest.exe; 
+    file [ssl.test]dsatest.exe; 
+    file [ssl.test]exptest.exe; 
+    file [ssl.test]hmactest.exe;
+    file [ssl.test]ideatest.exe; 
+    file [ssl.test]md2test.exe; 
+    file [ssl.test]md4test.exe; 
+    file [ssl.test]md5test.exe;
+    file [ssl.test]mdc2test.exe; 
+    file [ssl.test]randtest.exe; 
+    file [ssl.test]rc2test.exe; 
+    file [ssl.test]rc4test.exe;
+    file [ssl.test]rc5test.exe; 
+    file [ssl.test]rmdtest.exe; 
+    file [ssl.test]rsa_test.exe; 
+    file [ssl.test]sha1test.exe;
+    file [ssl.test]shatest.exe; 
+    file [ssl.test]ssltest.exe;
+--
+    file [systest]ssl$ivp.com;
+--
+    directory [ssl.com] ;
+
+    file [sys$startup]ssl$startup.com;
+    file [sys$startup]ssl$shutdown.com;
+
+    file [ssl.com]ssl$systartup.com;
+    file [ssl.com]ssl$syshutdown.com;
+    file [ssl.com]ssl$utils.com;
+--
+    file [ssl.com]ssl$auth_cert.com;
+    file [ssl.com]ssl$auto_cert.com;
+    file [ssl.com]ssl$cert_tool.com;
+    file [ssl.com]ssl$conf_util.com;
+    file [ssl.com]ssl$draw_box.com;
+    file [ssl.com]ssl$exit_cmd.tpu;
+    file [ssl.com]ssl$fill_box.com;
+    file [ssl.com]ssl$hash_cert.com;
+    file [ssl.com]ssl$init_env.com;
+    file [ssl.com]ssl$init_term.com;
+    file [ssl.com]ssl$pick_file.com;
+    file [ssl.com]ssl$rem_env.com;
+    file [ssl.com]ssl$rqst_cert.com;
+    file [ssl.com]ssl$self_cert.com;
+    file [ssl.com]ssl$show_file.com;
+    file [ssl.com]ssl$sign_cert.com;
+    file [ssl.com]ssl$view_cert.com;
+--
+end product ;

cpq-axpvms-ssl-t0100--1.pcsi$text

@@ -0,0 +1,82 @@
+=product CPQ AXPVMS SSL T1.0 full
+1 'PRODUCT
+=prompt SSL for OpenVMS Alpha T1.0 (Based on OpenSSL 0.9.6B).
+SSL for OpenVMS provides a toolkit that implements SSL V2/V3, TLS V1,
+and a general purpose cryptography library.
+
+1 'PRODUCER
+
+1 'NOTICE
+=prompt (c) Compaq Computer Corporation 2002. All rights reserved.
+
+COMPAQ Registered in U.S. Patent and Trademark Office.
+
+Confidential computer software. Valid license from Compaq or
+authorized sublicensor required for possession, use or copying.
+Consistent with FAR 12.211 and 12.212, Commercial Computer Software,
+Computer Software Documentation, and Technical Data for Commercial
+Items are licensed to the U.S. Government under vendor's standard
+commercial license.
+
+This software is installable on OpenVMS processors using the POLYCENTER
+Software Installation utility.
+
+IMPORTANT LEGAL NOTICE:
+
+        Exports of this product are subject to U.S. Export Administration
+        Regulations pertaining to encryption items and may require that 
+        individual export authorization be obtained from the U.S. 
+        Department of Commerce.
+
+1 START_INSTRUCTION
+=prompt @SYS$STARTUP:SSL$STARTUP.COM should be run at system startup.
+Once the installation is complete, adding the following line to
+SYS$MANAGER:SYSTARTUP_VMS.COM will define the SSL$ logicals 
+in the SYSTEM logical name table:
+
+        $ @SYS$STARTUP:SSL$STARTUP.COM "/SYSTEM"
+
+It is also possible to have the logicals placed in other logical 
+name tables - EXEC,USER, etc - by replacing the SYSTEM parameter
+above with the alternate table name.
+
+
+1 RELEASE_NOTES
+=prompt Refer to SYS$HELP:SSL010.RELEASE_NOTES for more information.
+The SSL product release notes contain up to date information regarding 
+bug fixes, known problems, and general installation information.
+
+1 RUN_IVP
+=prompt Run the installation verification procedure (IVP)?
+This option determines if the installation verification
+procedure will be run as part of the installation.  The procedure 
+should take few minutes to run, depending on the processor
+speed.  If it is not run during the installation, then it
+should be run as part of the post installation procedure.
+
+1 POST_INSTALL
+=prompt There are post installation activities that need to be performed.
+This includes things like defining logical names and running SSL$UTIL.COM 
+to define some foreign symbols, and running the IVP if it was not done
+as part of the installation.  Refer the to Release Notes for more 
+information about activities that should be performed once the installation 
+has finished.  
+
+SSL has created the following directory structure in
+PCSI$DESTINATION, which defaults to SYS$SYSDEVICE:[VMS$COMMON]:
+
+ [SSL] - 
+ [SSL.ALPHA_EXE] - Contains the images for the Alpha platform. 
+ [SSL.ALPHA_LIB] - Contains the .OLBs for the Alpha platform. 
+ [SSL.CERTS] -     Directory to hold certificates 
+ [SSL.COM] -	   Directory to hold the various command procedures.
+ [SSL.CONF] -	   Contains the configuration files.
+ [SSL.INCLUDE] -   Contains the C Header (.H) files.
+ [SSL.PRIVATE] -   Files specifically for SSL use such as RANDFILE.
+ [SSL.TEST] -	   Contains the files used during the IVP.
+
+ 
+1 NOAXPVMS
+=prompt Minimum OpenVMS Alpha software not found on system, abort installation
+This kit requires a minimum OpenVMS Alpha version of V7.2.
+

crypto/Makefile.ssl

@@ -57,7 +57,7 @@ buildinf.h: ../Makefile.ssl
 	echo "  /* auto-generated by crypto/Makefile.ssl for crypto/cversion.c */"; \
 	echo "  #define CFLAGS \"$(CC) $(CFLAG)\""; \
 	echo "  #define PLATFORM \"$(PLATFORM)\""; \
-	echo "  #define DATE \"`date`\""; \
+	echo "  #define DATE \"`LC_ALL=C LC_TIME=C date`\""; \
 	echo "#endif" ) >buildinf.h
 
 testapps:

crypto/aes/Makefile.ssl

@@ -26,8 +26,8 @@ TEST=
 APPS=
 
 LIB=$(TOP)/libcrypto.a
-LIBSRC=aes_core.c aes_misc.c aes_ecb.c aes_cbc.c
-LIBOBJ=aes_core.o aes_misc.o aes_ecb.o aes_cbc.o
+LIBSRC=aes_core.c aes_misc.c aes_ecb.c aes_cbc.c aes_cfb.c aes_ofb.c aes_ctr.c
+LIBOBJ=aes_core.o aes_misc.o aes_ecb.o aes_cbc.o aes_cfb.o aes_ofb.o aes_ctr.o
 
 SRC= $(LIBSRC)
 
@@ -54,7 +54,7 @@ files:
 links:
 	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@#$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
+	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
 	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
 
 install: installs
@@ -88,10 +88,16 @@ clean:
 
 aes_cbc.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
 aes_cbc.o: ../../include/openssl/opensslconf.h aes_cbc.c aes_locl.h
+aes_cfb.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
+aes_cfb.o: ../../include/openssl/opensslconf.h aes_cfb.c aes_locl.h
 aes_core.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
 aes_core.o: ../../include/openssl/opensslconf.h aes_core.c aes_locl.h
+aes_ctr.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
+aes_ctr.o: ../../include/openssl/opensslconf.h aes_ctr.c aes_locl.h
 aes_ecb.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
 aes_ecb.o: ../../include/openssl/opensslconf.h aes_ecb.c aes_locl.h
 aes_misc.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
 aes_misc.o: ../../include/openssl/opensslconf.h
 aes_misc.o: ../../include/openssl/opensslv.h aes_locl.h aes_misc.c
+aes_ofb.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
+aes_ofb.o: ../../include/openssl/opensslconf.h aes_locl.h aes_ofb.c

crypto/aes/aes.h

@@ -1,6 +1,6 @@
 /* crypto/aes/aes.h -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -58,8 +58,10 @@
 
 static const int AES_DECRYPT = 0;
 static const int AES_ENCRYPT = 1;
-#define AES_MAXNR 14 /* array size can't be a const in C */
-static const int AES_BLOCK_SIZE = 16; /* bytes */
+/* Because array size can't be a const in C, the following two are macros.
+   Both sizes are in bytes. */
+#define AES_MAXNR 14
+#define AES_BLOCK_SIZE 16
 
 #ifdef  __cplusplus
 extern "C" {
@@ -74,17 +76,31 @@ typedef struct aes_key_st AES_KEY;
 
 const char *AES_options(void);
 
-int AES_set_encrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
-int AES_set_decrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
+int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+	AES_KEY *key);
+int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+	AES_KEY *key);
 
-void AES_encrypt(const unsigned char *in, unsigned char *out, const AES_KEY *key);
-void AES_decrypt(const unsigned char *in, unsigned char *out, const AES_KEY *key);
+void AES_encrypt(const unsigned char *in, unsigned char *out,
+	const AES_KEY *key);
+void AES_decrypt(const unsigned char *in, unsigned char *out,
+	const AES_KEY *key);
 
 void AES_ecb_encrypt(const unsigned char *in, unsigned char *out,
-	       	     const AES_KEY *key, const int enc);
+	const AES_KEY *key, const int enc);
 void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
-	       	     const unsigned long length, const AES_KEY *key,
-		     unsigned char *ivec, const int enc);
+	const unsigned long length, const AES_KEY *key,
+	unsigned char *ivec, const int enc);
+void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
+	const unsigned long length, const AES_KEY *key,
+	unsigned char *ivec, int *num, const int enc);
+void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
+	const unsigned long length, const AES_KEY *key,
+	unsigned char *ivec, int *num);
+void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
+	const unsigned long length, const AES_KEY *key,
+	unsigned char *counter, unsigned int *num);
+
 
 #ifdef  __cplusplus
 }

crypto/aes/aes_cbc.c

@@ -1,6 +1,6 @@
 /* crypto/aes/aes_cbc.c -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

crypto/aes/aes_cfb.c

@@ -0,0 +1,151 @@
+/* crypto/aes/aes_cfb.c -*- mode:C; c-file-style: "eay" -*- */
+/* ====================================================================
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <assert.h>
+#include <openssl/aes.h>
+#include "aes_locl.h"
+
+/* The input and output encrypted as though 128bit cfb mode is being
+ * used.  The extra state information to record how much of the
+ * 128bit block we have used is contained in *num;
+ */
+
+void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
+	const unsigned long length, const AES_KEY *key,
+	unsigned char *ivec, int *num, const int enc) {
+
+	unsigned int n;
+	unsigned long l = length;
+	unsigned char c;
+
+	assert(in && out && key && ivec && num);
+
+	n = *num;
+
+	if (enc) {
+		while (l--) {
+			if (n == 0) {
+				AES_encrypt(ivec, ivec, key);
+			}
+			ivec[n] = *(out++) = *(in++) ^ ivec[n];
+			n = (n+1) % AES_BLOCK_SIZE;
+		}
+	} else {
+		while (l--) {
+			if (n == 0) {
+				AES_decrypt(ivec, ivec, key);
+			}
+			c = *(in);
+			*(out++) = *(in++) ^ ivec[n];
+			ivec[n] = c;
+			n = (n+1) % AES_BLOCK_SIZE;
+		}
+	}
+
+	*num=n;
+}
+

crypto/aes/aes_core.c

@@ -715,16 +715,6 @@ static const u32 rcon[] = {
 	0x1B000000, 0x36000000, /* for 128-bit blocks, Rijndael never uses more than 10 rcon values */
 };
 
-#define SWAP(x) (_lrotl(x, 8) & 0x00ff00ff | _lrotr(x, 8) & 0xff00ff00)
-
-#ifdef _MSC_VER
-#define GETU32(p) SWAP(*((u32 *)(p)))
-#define PUTU32(ct, st) { *((u32 *)(ct)) = SWAP((st)); }
-#else
-#define GETU32(pt) (((u32)(pt)[0] << 24) ^ ((u32)(pt)[1] << 16) ^ ((u32)(pt)[2] <<  8) ^ ((u32)(pt)[3]))
-#define PUTU32(ct, st) { (ct)[0] = (u8)((st) >> 24); (ct)[1] = (u8)((st) >> 16); (ct)[2] = (u8)((st) >>  8); (ct)[3] = (u8)(st); }
-#endif
-
 /**
  * Expand the cipher key into the encryption key schedule.
  */

crypto/aes/aes_ctr.c

@@ -0,0 +1,117 @@
+/* crypto/aes/aes_ctr.c -*- mode:C; c-file-style: "eay" -*- */
+/* ====================================================================
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ */
+
+#include <assert.h>
+#include <openssl/aes.h>
+#include "aes_locl.h"
+
+/* NOTE: CTR mode is big-endian.  The rest of the AES code
+ * is endian-neutral. */
+
+/* increment counter (128-bit int) by 2^64 */
+static void AES_ctr128_inc(unsigned char *counter) {
+	unsigned long c;
+
+	/* Grab 3rd dword of counter and increment */
+#ifdef L_ENDIAN
+	c = GETU32(counter + 8);
+	c++;
+	PUTU32(counter + 8, c);
+#else
+	c = GETU32(counter + 4);
+	c++;
+	PUTU32(counter + 4, c);
+#endif
+
+	/* if no overflow, we're done */
+	if (c)
+		return;
+
+	/* Grab top dword of counter and increment */
+#ifdef L_ENDIAN
+	c = GETU32(counter + 12);
+	c++;
+	PUTU32(counter + 12, c);
+#else
+	c = GETU32(counter +  0);
+	c++;
+	PUTU32(counter +  0, c);
+#endif
+
+}
+
+/* The input encrypted as though 128bit counter mode is being
+ * used.  The extra state information to record how much of the
+ * 128bit block we have used is contained in *num;
+ */
+void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
+	const unsigned long length, const AES_KEY *key,
+	unsigned char *counter, unsigned int *num) {
+
+	unsigned int n;
+	unsigned long l=length;
+	unsigned char tmp[AES_BLOCK_SIZE];
+
+	assert(in && out && key && counter && num);
+
+	n = *num;
+
+	while (l--) {
+		if (n == 0) {
+			AES_ctr128_inc(counter);
+			AES_encrypt(counter, tmp, key);
+		}
+		*(out++) = *(in++) ^ tmp[n];
+		n = (n+1) % AES_BLOCK_SIZE;
+	}
+
+	*num=n;
+}

crypto/aes/aes_ecb.c

@@ -1,6 +1,6 @@
 /* crypto/aes/aes_ecb.c -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

crypto/aes/aes_locl.h

@@ -1,6 +1,6 @@
 /* crypto/aes/aes.h -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -65,6 +65,15 @@
 #include <string.h>
 #endif
 
+#ifdef _MSC_VER
+# define SWAP(x) (_lrotl(x, 8) & 0x00ff00ff | _lrotr(x, 8) & 0xff00ff00)
+# define GETU32(p) SWAP(*((u32 *)(p)))
+# define PUTU32(ct, st) { *((u32 *)(ct)) = SWAP((st)); }
+#else
+# define GETU32(pt) (((u32)(pt)[0] << 24) ^ ((u32)(pt)[1] << 16) ^ ((u32)(pt)[2] <<  8) ^ ((u32)(pt)[3]))
+# define PUTU32(ct, st) { (ct)[0] = (u8)((st) >> 24); (ct)[1] = (u8)((st) >> 16); (ct)[2] = (u8)((st) >>  8); (ct)[3] = (u8)(st); }
+#endif
+
 typedef unsigned long u32;
 typedef unsigned short u16;
 typedef unsigned char u8;

crypto/aes/aes_misc.c

@@ -1,6 +1,6 @@
 /* crypto/aes/aes_misc.c -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

crypto/aes/aes_ofb.c

@@ -1,3 +1,53 @@
+/* crypto/aes/aes_ofb.c -*- mode:C; c-file-style: "eay" -*- */
+/* ====================================================================
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
@@ -55,42 +105,32 @@
  * [including the GNU Public Licence.]
  */
 
-#ifdef __cplusplus
-extern "C" {
-#endif
+#include <assert.h>
+#include <openssl/aes.h>
+#include "aes_locl.h"
 
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
+/* The input and output encrypted as though 128bit ofb mode is being
+ * used.  The extra state information to record how much of the
+ * 128bit block we have used is contained in *num;
+ */
+void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
+	const unsigned long length, const AES_KEY *key,
+	unsigned char *ivec, int *num) {
 
-#ifdef __cplusplus
+	unsigned int n;
+	unsigned long l=length;
+
+	assert(in && out && key && ivec && num);
+
+	n = *num;
+
+	while (l--) {
+		if (n == 0) {
+			AES_encrypt(ivec, ivec, key);
+		}
+		*(out++) = *(in++) ^ ivec[n];
+		n = (n+1) % AES_BLOCK_SIZE;
+	}
+
+	*num=n;
 }
-#endif
-
-typedef struct datum_st {
-    char *dptr;
-    int dsize;
-} datum;
-
-#include <openssl/crypto.h>
-#include <openssl/buffer.h>
-#include <openssl/bio.h>
-#include <openssl/evp.h>
-#include <openssl/err.h>
-#include <openssl/x509.h>
-#include <openssl/ssl.h>
-
-#ifdef DEBUG
-#define pr_name(name)           printf("%s\n",name)
-#define pr_name_d(name,p2)      printf("%s %d\n",name,p2)
-#define pr_name_dd(name,p2,p3)  printf("%s %d %d\n",name,p2,p3)
-#else
-#define pr_name(name)
-#define pr_name_d(name,p2)
-#define pr_name_dd(name,p2,p3)
-#endif
-
-SV *new_ref(char *type, char *obj, int mort);
-int ex_new(char *obj, SV *data, CRYPTO_EX_DATA *ad, int idx, long argl, char *argp);
-void ex_cleanup(char *obj, SV *data, CRYPTO_EX_DATA *ad, int idx, long argl, char *argp);
-

crypto/asn1/a_sign.c

@@ -55,6 +55,59 @@
  * copied and put under another distribution licence
  * [including the GNU Public Licence.]
  */
+/* ====================================================================
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
 
 #include <stdio.h>
 #include <time.h>
@@ -90,7 +143,14 @@ int ASN1_sign(int (*i2d)(), X509_ALGOR *algor1, X509_ALGOR *algor2,
 		else
 			a=algor2;
 		if (a == NULL) continue;
-		if (	(a->parameter == NULL) || 
+                if (type->pkey_type == NID_dsaWithSHA1)
+			{
+			/* special case: RFC 2459 tells us to omit 'parameters'
+			 * with id-dsa-with-sha1 */
+			ASN1_TYPE_free(a->parameter);
+			a->parameter = NULL;
+			}
+		else if ((a->parameter == NULL) || 
 			(a->parameter->type != V_ASN1_NULL))
 			{
 			ASN1_TYPE_free(a->parameter);
@@ -169,7 +229,14 @@ int ASN1_item_sign(const ASN1_ITEM *it, X509_ALGOR *algor1, X509_ALGOR *algor2,
 		else
 			a=algor2;
 		if (a == NULL) continue;
-		if (	(a->parameter == NULL) || 
+                if (type->pkey_type == NID_dsaWithSHA1)
+			{
+			/* special case: RFC 2459 tells us to omit 'parameters'
+			 * with id-dsa-with-sha1 */
+			ASN1_TYPE_free(a->parameter);
+			a->parameter = NULL;
+			}
+		else if ((a->parameter == NULL) || 
 			(a->parameter->type != V_ASN1_NULL))
 			{
 			ASN1_TYPE_free(a->parameter);

crypto/asn1/asn1.h

@@ -440,6 +440,8 @@ typedef const ASN1_ITEM * ASN1_ITEM_EXP(void);
 DECLARE_STACK_OF(ASN1_INTEGER)
 DECLARE_ASN1_SET_OF(ASN1_INTEGER)
 
+DECLARE_STACK_OF(ASN1_GENERALSTRING)
+
 typedef struct asn1_type_st
 	{
 	int type;
@@ -1012,6 +1014,7 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_F_I2D_PUBLICKEY				 164
 #define ASN1_F_I2D_RSA_PUBKEY				 165
 #define ASN1_F_LONG_C2I					 166
+#define ASN1_F_OID_MODULE_INIT				 175
 #define ASN1_F_PKCS5_PBE2_SET				 167
 #define ASN1_F_X509_CINF_NEW				 168
 #define ASN1_F_X509_CRL_ADD0_REVOKED			 169
@@ -1021,6 +1024,7 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_F_X509_PKEY_NEW				 173
 
 /* Reason codes. */
+#define ASN1_R_ADDING_OBJECT				 171
 #define ASN1_R_AUX_ERROR				 100
 #define ASN1_R_BAD_CLASS				 101
 #define ASN1_R_BAD_OBJECT_HEADER			 102
@@ -1034,6 +1038,7 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_R_DECODE_ERROR				 110
 #define ASN1_R_DECODING_ERROR				 111
 #define ASN1_R_ENCODE_ERROR				 112
+#define ASN1_R_ERROR_LOADING_SECTION			 172
 #define ASN1_R_ERROR_PARSING_SET_ELEMENT		 113
 #define ASN1_R_ERROR_SETTING_CIPHER_PARAMS		 114
 #define ASN1_R_EXPECTING_AN_INTEGER			 115

crypto/asn1/asn1_err.c

@@ -1,6 +1,6 @@
 /* crypto/asn1/asn1_err.c */
 /* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -134,6 +134,7 @@ static ERR_STRING_DATA ASN1_str_functs[]=
 {ERR_PACK(0,ASN1_F_I2D_PUBLICKEY,0),	"i2d_PublicKey"},
 {ERR_PACK(0,ASN1_F_I2D_RSA_PUBKEY,0),	"i2d_RSA_PUBKEY"},
 {ERR_PACK(0,ASN1_F_LONG_C2I,0),	"LONG_C2I"},
+{ERR_PACK(0,ASN1_F_OID_MODULE_INIT,0),	"OID_MODULE_INIT"},
 {ERR_PACK(0,ASN1_F_PKCS5_PBE2_SET,0),	"PKCS5_pbe2_set"},
 {ERR_PACK(0,ASN1_F_X509_CINF_NEW,0),	"X509_CINF_NEW"},
 {ERR_PACK(0,ASN1_F_X509_CRL_ADD0_REVOKED,0),	"X509_CRL_add0_revoked"},
@@ -146,6 +147,7 @@ static ERR_STRING_DATA ASN1_str_functs[]=
 
 static ERR_STRING_DATA ASN1_str_reasons[]=
 	{
+{ASN1_R_ADDING_OBJECT                    ,"adding object"},
 {ASN1_R_AUX_ERROR                        ,"aux error"},
 {ASN1_R_BAD_CLASS                        ,"bad class"},
 {ASN1_R_BAD_OBJECT_HEADER                ,"bad object header"},
@@ -159,6 +161,7 @@ static ERR_STRING_DATA ASN1_str_reasons[]=
 {ASN1_R_DECODE_ERROR                     ,"decode error"},
 {ASN1_R_DECODING_ERROR                   ,"decoding error"},
 {ASN1_R_ENCODE_ERROR                     ,"encode error"},
+{ASN1_R_ERROR_LOADING_SECTION            ,"error loading section"},
 {ASN1_R_ERROR_PARSING_SET_ELEMENT        ,"error parsing set element"},
 {ASN1_R_ERROR_SETTING_CIPHER_PARAMS      ,"error setting cipher params"},
 {ASN1_R_EXPECTING_AN_INTEGER             ,"expecting an integer"},

crypto/asn1/asn_moid.c

@@ -65,21 +65,31 @@
 
 /* Simple ASN1 OID module: add all objects in a given section */
 
-/* NOTE: doesn't do anything other than print debug messages yet... */
 static int oid_module_init(CONF_IMODULE *md, const CONF *cnf)
 	{
-	fprintf(stderr, "Called oid_module_init: name %s, value %s\n",
-			CONF_imodule_get_name(md), CONF_imodule_get_value(md));
+	int i;
+	const char *oid_section;
+	STACK_OF(CONF_VALUE) *sktmp;
+	CONF_VALUE *oval;
+	oid_section = CONF_imodule_get_value(md);
+	if(!(sktmp = NCONF_get_section(cnf, oid_section)))
+		{
+		ASN1err(ASN1_F_OID_MODULE_INIT, ASN1_R_ERROR_LOADING_SECTION);
+		return 0;
+		}
+	for(i = 0; i < sk_CONF_VALUE_num(sktmp); i++)
+		{
+		oval = sk_CONF_VALUE_value(sktmp, i);
+		if(OBJ_create(oval->value, oval->name, oval->name) == NID_undef)
+			{
+			ASN1err(ASN1_F_OID_MODULE_INIT, ASN1_R_ADDING_OBJECT);
+			return 0;
+			}
+		}
 	return 1;
-	}
-
-static void oid_module_finish(CONF_IMODULE *md)
-	{
-	fprintf(stderr, "Called oid_module_finish: name %s, value %s\n",
-			CONF_imodule_get_name(md), CONF_imodule_get_value(md));
-	}
+}
 
 void ASN1_add_oid_module(void)
 	{
-	CONF_module_add("oid_section", oid_module_init, oid_module_finish);
+	CONF_module_add("oid_section", oid_module_init, 0);
 	}

crypto/asn1/d2i_pu.c

@@ -113,7 +113,7 @@ EVP_PKEY *d2i_PublicKey(int type, EVP_PKEY **a, unsigned char **pp,
 #endif
 #ifndef OPENSSL_NO_ECDSA
 	case EVP_PKEY_ECDSA:
-		if ((ret->pkey.ecdsa = d2i_ECDSAPublicKey(&(ret->pkey.ecdsa), 
+		if ((ret->pkey.ecdsa = ECDSAPublicKey_set_octet_string(&(ret->pkey.ecdsa), 
 			(const unsigned char **)pp, length)) == NULL)
 			{
 			ASN1err(ASN1_F_D2I_PUBLICKEY, ERR_R_ASN1_LIB);

crypto/asn1/i2d_pu.c

@@ -85,7 +85,7 @@ int i2d_PublicKey(EVP_PKEY *a, unsigned char **pp)
 #endif
 #ifndef OPENSSL_NO_ECDSA
 	case EVP_PKEY_ECDSA:
-		return(i2d_ECDSAPublicKey(a->pkey.ecdsa, pp));
+		return(ECDSAPublicKey_get_octet_string(a->pkey.ecdsa, pp));
 #endif
 	default:
 		ASN1err(ASN1_F_I2D_PUBLICKEY,ASN1_R_UNSUPPORTED_PUBLIC_KEY_TYPE);

crypto/asn1/p5_pbev2.c

@@ -116,6 +116,8 @@ X509_ALGOR *PKCS5_pbe2_set(const EVP_CIPHER *cipher, int iter,
 	if (RAND_pseudo_bytes(iv, EVP_CIPHER_iv_length(cipher)) < 0)
 		goto err;
 
+	EVP_CIPHER_CTX_init(&ctx);
+
 	/* Dummy cipherinit to just setup the IV */
 	EVP_CipherInit_ex(&ctx, cipher, NULL, NULL, iv, 0);
 	if(EVP_CIPHER_param_to_asn1(&ctx, scheme->parameter) < 0) {

crypto/asn1/t_pkey.c

@@ -237,7 +237,8 @@ int ECDSA_print(BIO *bp, const ECDSA *x, int off)
 	unsigned char *buffer=NULL;
 	int     i, buf_len=0, ret=0, reason=ERR_R_BIO_LIB;
 	BIGNUM  *tmp_1=NULL, *tmp_2=NULL, *tmp_3=NULL,
-		*tmp_4=NULL, *tmp_5=NULL;
+		*tmp_4=NULL, *tmp_5=NULL, *tmp_6=NULL,
+		*tmp_7=NULL;
 	BN_CTX  *ctx=NULL;
 	EC_POINT *point=NULL;
  
@@ -249,7 +250,8 @@ int ECDSA_print(BIO *bp, const ECDSA *x, int off)
 		goto err;
 		}
 	if ((tmp_1 = BN_new()) == NULL || (tmp_2 = BN_new()) == NULL ||
-		(tmp_3 = BN_new()) == NULL || (ctx = BN_CTX_new()) == NULL)
+		(tmp_3 = BN_new()) == NULL || (ctx = BN_CTX_new()) == NULL ||
+		(tmp_6 = BN_new()) == NULL || (tmp_7 = BN_new()) == NULL)
 		{
 		reason = ERR_R_MALLOC_FAILURE;
 		goto err;
@@ -264,7 +266,12 @@ int ECDSA_print(BIO *bp, const ECDSA *x, int off)
 		reason = ERR_R_EC_LIB;
 		goto err;
 		}
-	if ((buf_len = EC_POINT_point2oct(x->group, point, POINT_CONVERSION_COMPRESSED, NULL, 0, ctx)) == 0)
+	if (!EC_GROUP_get_order(x->group, tmp_6, NULL) || !EC_GROUP_get_cofactor(x->group, tmp_7, NULL))
+		{
+		reason = ERR_R_EC_LIB;
+		goto err;
+		}
+	if ((buf_len = EC_POINT_point2oct(x->group, point, ECDSA_get_conversion_form(x), NULL, 0, ctx)) == 0)
 		{
 		reason = ECDSA_R_UNEXPECTED_PARAMETER_LENGTH;
 		goto err;
@@ -274,14 +281,14 @@ int ECDSA_print(BIO *bp, const ECDSA *x, int off)
 		reason = ERR_R_MALLOC_FAILURE;
 		goto err;
 		}
-	if (!EC_POINT_point2oct(x->group, point, POINT_CONVERSION_COMPRESSED, 
+	if (!EC_POINT_point2oct(x->group, point, ECDSA_get_conversion_form(x), 
 				buffer, buf_len, ctx)) goto err;
 	if ((tmp_4 = BN_bin2bn(buffer, buf_len, NULL)) == NULL)
 		{
 		reason = ERR_R_BN_LIB;
 		goto err;
 		}
-	if ((i = EC_POINT_point2oct(x->group, x->pub_key, POINT_CONVERSION_COMPRESSED, NULL, 0, ctx)) == 0)
+	if ((i = EC_POINT_point2oct(x->group, x->pub_key, ECDSA_get_conversion_form(x), NULL, 0, ctx)) == 0)
 		{
 		reason = ECDSA_R_UNEXPECTED_PARAMETER_LENGTH;
 		goto err;
@@ -292,7 +299,7 @@ int ECDSA_print(BIO *bp, const ECDSA *x, int off)
 		buf_len = i;
 		goto err;
 		}
-	if (!EC_POINT_point2oct(x->group, x->pub_key, POINT_CONVERSION_COMPRESSED, 
+	if (!EC_POINT_point2oct(x->group, x->pub_key, ECDSA_get_conversion_form(x), 
 				buffer, buf_len, ctx))
 		{
 		reason = ERR_R_EC_LIB;
@@ -330,6 +337,8 @@ int ECDSA_print(BIO *bp, const ECDSA *x, int off)
 	if ((tmp_2 != NULL) && !print(bp, "A:   ", tmp_2, buffer, off)) goto err;
 	if ((tmp_3 != NULL) && !print(bp, "B:   ", tmp_3, buffer, off)) goto err;
 	if ((tmp_4 != NULL) && !print(bp, "Gen: ", tmp_4, buffer, off)) goto err;
+	if ((tmp_6 != NULL) && !print(bp, "Order: ", tmp_6, buffer, off)) goto err;
+	if ((tmp_7 != NULL) && !print(bp, "Cofactor: ", tmp_7, buffer, off)) goto err;
 	ret=1;
 err:
 	if (!ret)
@@ -339,6 +348,8 @@ err:
 	if (tmp_3) BN_free(tmp_3);
 	if (tmp_4) BN_free(tmp_4);
 	if (tmp_5) BN_free(tmp_5);
+	if (tmp_6) BN_free(tmp_6);
+	if (tmp_7) BN_free(tmp_7);
 	if (ctx)   BN_CTX_free(ctx);
 	if (buffer != NULL) OPENSSL_free(buffer);
 	return(ret);
@@ -519,7 +530,8 @@ int ECDSAParameters_print(BIO *bp, const ECDSA *x)
        unsigned char *buffer=NULL;
        int     buf_len;
        int     reason=ERR_R_EC_LIB, i, ret=0;
-       BIGNUM  *tmp_1=NULL, *tmp_2=NULL, *tmp_3=NULL, *tmp_4=NULL;
+       BIGNUM  *tmp_1=NULL, *tmp_2=NULL, *tmp_3=NULL, *tmp_4=NULL,
+               *tmp_5=NULL, *tmp_6=NULL;
        BN_CTX  *ctx=NULL;
        EC_POINT *point=NULL;
  
@@ -530,20 +542,23 @@ int ECDSAParameters_print(BIO *bp, const ECDSA *x)
 		goto err;
        }
        if ((tmp_1 = BN_new()) == NULL || (tmp_2 = BN_new()) == NULL ||
-	   (tmp_3 = BN_new()) == NULL || (ctx = BN_CTX_new()) == NULL)
+	   (tmp_3 = BN_new()) == NULL || (tmp_5 = BN_new()) == NULL ||
+           (tmp_6 = BN_new()) == NULL || (ctx = BN_CTX_new()) == NULL)
        {
 		reason = ERR_R_MALLOC_FAILURE;
 		goto err;
 	}
 	if (!EC_GROUP_get_curve_GFp(x->group, tmp_1, tmp_2, tmp_3, ctx)) goto err;
 	if ((point = EC_GROUP_get0_generator(x->group)) == NULL) goto err;
-	buf_len = EC_POINT_point2oct(x->group, point, POINT_CONVERSION_COMPRESSED, NULL, 0, ctx);
+	if (!EC_GROUP_get_order(x->group, tmp_5, ctx)) goto err;
+	if (!EC_GROUP_get_cofactor(x->group, tmp_6, ctx)) goto err;	
+	buf_len = EC_POINT_point2oct(x->group, point, ECDSA_get_conversion_form(x), NULL, 0, ctx);
 	if (!buf_len || (buffer = OPENSSL_malloc(buf_len)) == NULL)
 	{
 		reason = ERR_R_MALLOC_FAILURE;
 		goto err;
 	}
-	if (!EC_POINT_point2oct(x->group, point, POINT_CONVERSION_COMPRESSED, buffer, buf_len, ctx))
+	if (!EC_POINT_point2oct(x->group, point, ECDSA_get_conversion_form(x), buffer, buf_len, ctx))
 	{
 		reason = ERR_R_EC_LIB;
 		goto err;
@@ -565,13 +580,17 @@ int ECDSAParameters_print(BIO *bp, const ECDSA *x)
 	if (!print(bp, "Prime p:", tmp_1, buffer, 4)) goto err;
 	if (!print(bp, "Curve a:", tmp_2, buffer, 4)) goto err;
 	if (!print(bp, "Curve b:", tmp_3, buffer, 4)) goto err;
-	if (!print(bp, "Generator ( compressed ) :", tmp_4, buffer, 4)) goto err; 
+	if (!print(bp, "Generator (compressed):", tmp_4, buffer, 4)) goto err; 
+	if (!print(bp, "Order:", tmp_5, buffer, 4)) goto err;
+	if (!print(bp, "Cofactor:", tmp_6, buffer, 4)) goto err;
 	ret=1;
 err:
 	if (tmp_1)  BN_free(tmp_1);
 	if (tmp_2)  BN_free(tmp_2);
 	if (tmp_3)  BN_free(tmp_3);
 	if (tmp_4)  BN_free(tmp_4);
+	if (tmp_5)  BN_free(tmp_5);
+	if (tmp_6)  BN_free(tmp_6);
 	if (ctx)    BN_CTX_free(ctx);
 	if (buffer) OPENSSL_free(buffer);
 	ECDSAerr(ECDSA_F_ECDSAPARAMETERS_PRINT, reason);