Ok, we are rolling 0.9.7-beta1 now.

Submitted by:
Reviewed by:
PR:

.cvsignore

@@ -1,4 +1,3 @@
-openssl.pc
 Makefile.ssl
 MINFO
 makefile.one

Configure

@@ -10,7 +10,7 @@ use strict;
 
 # see INSTALL for instructions.
 
-my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-engine] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
 
 # Options:
 #
@@ -38,7 +38,6 @@ my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-
 # --test-sanity Make a number of sanity checks on the data in this file.
 #               This is a debugging tool for OpenSSL developers.
 #
-# no-engine     do not compile in any engine code.
 # no-hw-xxx     do not compile support for specific crypto hardware.
 #               Generic OpenSSL-style methods relating to this support
 #               are always compiled but return NULL if the hardware
@@ -108,6 +107,7 @@ my $tlib="-lnsl -lsocket";
 my $bits1="THIRTY_TWO_BIT ";
 my $bits2="SIXTY_FOUR_BIT ";
 
+my $x86_sol_asm="asm/bn86-sol.o asm/co86-sol.o:asm/dx86-sol.o asm/yx86-sol.o:asm/bx86-sol.o:asm/mx86-sol.o:asm/sx86-sol.o:asm/cx86-sol.o:asm/rx86-sol.o:asm/rm86-sol.o:asm/r586-sol.o";
 my $x86_elf_asm="asm/bn86-elf.o asm/co86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm/bx86-elf.o:asm/mx86-elf.o:asm/sx86-elf.o:asm/cx86-elf.o:asm/rx86-elf.o:asm/rm86-elf.o:asm/r586-elf.o";
 my $x86_out_asm="asm/bn86-out.o asm/co86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
 my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
@@ -120,7 +120,7 @@ my $alpha_asm="::::::::";
 # -DB_ENDIAN slows things down on a sparc for md5, but helps sha1.
 # So the md5_locl.h file has an undef B_ENDIAN if sun is defined
 
-#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags
+#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib
 
 my %table=(
 # File 'TABLE' (created by 'make TABLE') contains the data from this list,
@@ -134,7 +134,7 @@ my %table=(
 
 # Our development configs
 "purify",	"purify gcc:-g -DPURIFY -Wall::(unknown)::-lsocket -lnsl::::",
-"debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown)::-lefence::::",
+"debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown)::-lefence::::",
 "debug-ben",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::asm/bn86-elf.o asm/co86-elf.o",
 "debug-ben-openbsd","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
 "debug-ben-openbsd-debug","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
@@ -142,14 +142,11 @@ my %table=(
 "debug-ben-strict",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown)::::::",
 "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-ulf", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DBN_DEBUG_RAND -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations:::CYGWIN32::::win32:cygwin-shared:::.dll",
-"debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -mcpu=i486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared",
-"debug-steve-linux-pseudo64",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DOPENSSL_NO_ASM -g -mcpu=i486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:SIXTY_FOUR_BIT::dlfcn:linux-shared",
-"debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-levitte-linux-elf-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-levitte-linux-noasm-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-geoff","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DBN_CTX_DEBUG -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -g -ggdb3 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-ulf",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT:::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -mcpu=i486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
+"debug-steve-linux-pseudo64",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DOPENSSL_NO_ASM -g -mcpu=i486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:SIXTY_FOUR_BIT::dlfcn",
+"debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wtraditional -Wundef -Wshadow -Wid-clash-31 -Wcast-align -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wtraditional -Wundef -Wshadow -Wid-clash-31 -Wcast-align -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "dist",		"cc:-O::(unknown)::::::",
 
 # Basic configs that should work on any (32 and less bit) box
@@ -162,24 +159,25 @@ my %table=(
 # surrounds it with #APP #NO_APP comment pair which (at least Solaris
 # 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
 # error message.
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### Solaris x86 with Sun C setups
 "solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Solaris with GNU C setups
-"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:asm/des_enc-sparc.o fcrypt_b.o::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # -m32 should be safe to add as long as driver recognizes -mcpu=ultrasparc
-"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc31","gcc:-mcpu=ultrasparc -m64 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8
 # but keep the assembler modules.
-"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 ####
-"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -O -g -mcpu=ultrasparc -pedantic -ansi -Wall -Wshadow -Wno-long-long -D__EXTENSIONS__ -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Solaris with Sun C setups
 # DO NOT use /xO[34] on sparc with SC3.0.  It is broken, and will not pass the tests
@@ -188,9 +186,9 @@ my %table=(
 # SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
 # SC5.0 note: Compiler common patch 107357-01 or later is required!
 "solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:asm/des_enc-sparc.o fcrypt_b.o::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-KPIC:-xarch=v9:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):/usr/ccs/bin/ar rs",
+"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-KPIC:-xarch=v9:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):/usr/ccs/bin/ar rs",
 ####
 "debug-solaris-sparcv8-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-solaris-sparcv9-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -199,16 +197,17 @@ my %table=(
 "linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::",
 # Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently
 # assisted with debugging of following two configs.
-"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:asm/des_enc-sparc.o fcrypt_b.o::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # it's a real mess with -mcpu=ultrasparc option under Linux, but
 # -Wa,-Av8plus should do the trick no matter what.
-"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# GCC 3.1 is a requirement
-"linux64-sparcv9","gcc:-m64 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:ULTRASPARC:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv9.o::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# !!!Folowing can't be even tested yet!!!
+#    We have to wait till 64-bit glibc for SPARC is operational!!!
+#"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT:ULTRASPARC::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
 
 # Sunos configs, assuming sparc for the gcc one.
-##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown):SUNOS::DES_UNROLL:::",
-"sunos-gcc","gcc:-O3 -mv8 -Dssize_t=int::(unknown):SUNOS::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL DES_PTR DES_RISC1:::",
+##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown):::DES_UNROLL:::",
+"sunos-gcc","gcc:-O3 -mv8 -Dssize_t=int::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL DES_PTR DES_RISC1:::",
 
 #### IRIX 5.x configs
 # -mips2 flag is added by ./config when appropriate.
@@ -216,13 +215,13 @@ my %table=(
 "irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### IRIX 6.x configs
 # Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
-# './Configure irix-cc -o32' manually.
+# './Configure irix-[g]cc' manually.
 # -mips4 flag is added by ./config when appropriate.
-"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared::-mabi=n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared::-n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # N64 ABI builds.
-"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared::-mabi=64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared::-64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### Unified HP-UX ANSI C configs.
 # Special notes:
@@ -241,7 +240,7 @@ my %table=(
 #   suitable for execution on the host you're currently compiling at.
 #   If the toolkit is ment to be used on various PA-RISC processors
 #   consider './config +DAportable'.
-# - +DD64 is chosen in favour of +DA2.0W because it's meant to be
+# - +DD64 is chosen in favour of +DA2.0W because it's ment to be
 #   compatible with *future* releases.
 # - If you run ./Configure hpux-parisc-[g]cc manually don't forget to
 #   pass -D_REENTRANT on HP-UX 10 and later.
@@ -252,35 +251,29 @@ my %table=(
 #   crypto/sha/sha_lcl.h.
 #					<appro@fy.chalmers.se>
 #
+#!#"hpux-parisc-cc","cc:-Ae +O3 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
 # Since there is mention of this in shlib/hpux10-cc.sh
 "hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-gcc","gcc:-march=2.0 -O3 -DB_ENDIAN::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1:asm/pa-risc2.o:::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# 64bit PARISC for GCC without optimization, which seems to make problems.
-# Submitted by <ross.alexander@uk.neceur.com>
-"hpux64-parisc-gcc","gcc:-DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:-fpic::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:-fpic::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
+# IA-64 targets
+# I have no idea if this one actually works, feedback needed. <appro>
+"hpux-ia64-cc","cc:-Ae +DD32 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
+# with debugging of the following config.
+"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
 # Kevin Steves <ks@hp.se>
-"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # Isn't the line below meaningless? HP-UX cc optimizes for host by default.
 # hpux-parisc1_0-cc with +DAportable flag would make more sense. <appro>
-"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-
-# HP/UX IA-64 targets
-"hpux-ia64-cc","cc:-Ae +DD32 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
-# with debugging of the following config.
-"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# GCC builds [not tested yet]...
-# _ILP32 should have been defined by compiler driver, but it isn't...
-"hpux-ia64-gcc","gcc:-O3 -DB_ENDIAN -D_ILP32::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64.o:::::::::dlfcn:hpux-shared:-fpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-ia64-gcc","gcc:-mlp64 -O3 -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64.o:::::::::dlfcn:hpux-shared:-fpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", 
+"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # HPUX 9.X config.
 # Don't use the bundled cc.  It is broken.  Use HP ANSI C if possible, or
@@ -378,7 +371,6 @@ my %table=(
 
 # The intel boxes :-), It would be worth seeing if bsdi-gcc can use the
 # bn86-elf.o file file since it is hand tweaked assembler.
-"linux-ia32-icc",	"icc:-DL_ENDIAN -DTERMIO -O2::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-pentium",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ppro",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -388,21 +380,17 @@ my %table=(
 "debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
-"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
+"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
 "linux-ppc",    "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
-"linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-s390x",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
+"linux-s390x", "gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG:::::::::::linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-ia64-ecc",   "ecc:-DL_ENDIAN -DTERMIO -O2 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-x86_64", "gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR BF_PTR2 DES_INT DES_UNROLL:asm/x86_64-gcc.o:::::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"FreeBSD-sparc64","gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"FreeBSD-ia64","gcc:-DL_ENDIAN -DTERMIOS -O -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64-cpp.o:::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD",      "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
 "bsdi-gcc",     "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown):::RSA_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_bsdi_asm}",
 "bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -410,7 +398,7 @@ my %table=(
 "nextstep3.3",	"cc:-O3 -Wall:<libc.h>:(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::",
 
 # NCR MP-RAS UNIX ver 02.03.01
-"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl -lc89:${x86_gcc_des} ${x86_gcc_opts}:::",
+"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:::",
 
 # QNX 4
 "qnx4",	"cc:-DL_ENDIAN -DTERMIO::(unknown):::${x86_gcc_des} ${x86_gcc_opts}:",
@@ -421,36 +409,32 @@ my %table=(
 # Linux on ARM
 "linux-elf-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
-# SCO/Caldera targets.
-#
-# Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
-# Now we only have blended unixware-* as it's the only one used by ./config.
-# If you want to optimize for particular microarchitecture, bypass ./config
-# and './Configure unixware-7 -Kpentium_pro' or whatever appropriate.
-# Note that not all targets include assembler support. Mostly because of
-# lack of motivation to support out-of-date platforms with out-of-date
-# compiler drivers and assemblers. Tim Rice <tim@multitalents.net> has
-# patiently assisted to debug most of it.
-#
-# UnixWare 2.0x fails destest with -O.
-"unixware-2.0","cc:-DFILIO_H -DNO_STRINGS_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.1","cc:-O -DFILIO_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
-# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc.
-"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# UnixWare 2.0x fails destest with -O
+"unixware-2.0","cc:-DFILIO_H::-Kthread::-lsocket -lnsl -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
+"unixware-2.0-pentium","cc:-DFILIO_H -Kpentium::-Kthread::-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
 
+# UnixWare 2.1
+"unixware-2.1","cc:-O -DFILIO_H::-Kthread::-lsocket -lnsl -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
+"unixware-2.1-pentium","cc:-O -DFILIO_H -Kpentium::-Kthread::-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-2.1-p6","cc:-O -DFILIO_H -Kp6::-Kthread::-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+
+# UnixWare 7
+"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"unixware-7-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"unixware-7-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
+# OpenUNIX 8
+"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # IBM's AIX.
 "aix-cc",   "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
 "aix-gcc",  "gcc:-O3 -DB_ENDIAN::(unknown):AIX::BN_LLONG RC4_CHAR:::",
-"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:aix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::",
-"aix43-gcc",  "gcc:-O1 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
-"aix64-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384 -q64::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHAR::::::::::dlfcn:aix-shared::-q64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 64",
+"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix43-gcc",  "gcc:-O3 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
 
 #
 # Cray T90 and similar (SDSC)
@@ -483,6 +467,15 @@ my %table=(
 "dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown)::-lnsl -lsocket:RC4_INDEX DES_UNROLL:::",
 "dgux-R4-x86-gcc",	"gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown)::-lnsl -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 
+# SCO 3 - Tim Rice <tim@multitalents.net>
+"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
+
+# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
+# SCO cc.
+"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lresolv -lnsl:${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:svr3-shared:-Kpic", # des options?
+"sco5-cc-pentium",  "cc:-Kpentium::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
+"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lresolv -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC", # the SCO assembler doesn't seem to like our assembler files ...
+
 # Sinix/ReliantUNIX RM400
 # NOTE: The CDS++ Compiler up to V2.0Bsomething has the IRIX_CC_BUG optimizer problem. Better use -g  */
 "ReliantUNIX","cc:-KPIC -g -DTERMIOS -DB_ENDIAN::-Kthread:SNI:-lsocket -lnsl -lc -L/usr/ucblib -lucb:BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:reliantunix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -501,7 +494,6 @@ my %table=(
 # Windows NT, Microsoft Visual C++ 4.0
 
 "VC-NT","cl::::WINNT::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}::::::::::win32",
-"VC-CE","cl::::WINCE::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}::::::::::win32",
 "VC-WIN32","cl::::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}::::::::::win32",
 "VC-WIN16","cl:::(unknown):WIN16::MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX THIRTY_TWO_BIT:::",
 "VC-W31-16","cl:::(unknown):WIN16::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::",
@@ -509,31 +501,20 @@ my %table=(
 "VC-MSDOS","cl:::(unknown):MSDOS::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::",
 
 # Borland C++ 4.5
-"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX EXPORT_VAR_AS_FN::::::::::win32",
+"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX::::::::::win32",
 "BC-16","bcc:::(unknown):WIN16::BN_LLONG DES_PTR RC4_INDEX SIXTEEN_BIT:::",
 
-# MinGW
-"mingw", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -mno-cygwin -Wall:::MINGW32:-mno-cygwin -lwsock32 -lgdi32:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:win32::::.dll",
-
-# UWIN 
-"UWIN", "cc:-DTERMIOS -DL_ENDIAN -O -Wall:::UWIN::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
+# Mingw32
+# (Note: the real CFLAGS for Windows builds are defined by util/mk1mf.pl
+# and its library files in util/pl/*)
+"Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall:::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
 
 # Cygwin
 "Cygwin-pre1.3", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
-"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:win32:cygwin-shared:::.dll",
-"debug-Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:::CYGWIN32::::win32:cygwin-shared:::.dll",
-
-# NetWare from David Ward (dsward@novell.com) - requires MetroWerks NLM development tools
-# netware-clib => legacy CLib c-runtime support
-"netware-clib", "mwccnlm:::::${x86_gcc_opts}:::",
-# netware-libc => LibC/NKS support
-"netware-libc", "mwccnlm:::::BN_LLONG ${x86_gcc_opts}:::",
-
-# DJGPP
-"DJGPP", "gcc:-I/dev/env/WATT_ROOT/inc -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -Wall:::MSDOS:-L/dev/env/WATT_ROOT/lib -lwatt:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::",
+"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:win32:cygwin-shared:::.dll",
 
 # Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
-"ultrix-cc","cc:-std1 -O -Olimit 2500 -DL_ENDIAN::(unknown):::::::",
+"ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::(unknown):::::::",
 "ultrix-gcc","gcc:-O3 -DL_ENDIAN::(unknown):::::::",
 # K&R C is no longer supported; you need gcc on old Ultrix installations
 ##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::(unknown):::::::",
@@ -546,18 +527,15 @@ my %table=(
 "OpenBSD-m88k",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-mips",		"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-powerpc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::asm/des_enc-sparc.o fcrypt_b.o::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenBSD-sparc64",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::asm/des_enc-sparc.o fcrypt_b.o::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-sparc64",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-vax",		"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-hppa",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 ##### MacOS X (a.k.a. Rhapsody or Darwin) setup
-"rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX_RHAPSODY::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
-"darwin-ppc-cc","cc:-O3 -fomit-frame-pointer -fno-common -DB_ENDIAN::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin-i386-cc","cc:-O3 -fomit-frame-pointer -fno-common -DB_ENDIAN::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-
-##### A/UX
-"aux3-gcc","gcc:-O2 -DTERMIO::(unknown):AUX:-lbsd:RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
+"rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
+"darwin-ppc-cc","cc:-O3 -nostdinc -I/System/Library/Frameworks/System.framework/Headers -I/System/Library/Frameworks/System.frameworks/Headers/bsd -I/usr/include -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin-i386-cc","cc:-O3 -nostdinc -I/System/Library/Frameworks/System.framework/Headers -I/System/Library/Frameworks/System.frameworks/Headers/bsd -I/usr/include -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 
 ##### Sony NEWS-OS 4.x
 "newsos4-gcc","gcc:-O -DB_ENDIAN::(unknown):NEWS4:-lmld -liberty:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::",
@@ -570,18 +548,11 @@ my %table=(
 
 ##### VxWorks for various targets
 "vxworks-ppc405","ccppc:-g -msoft-float -mlongcall -DCPU=PPC405 -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
-"vxworks-ppc750","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h \$(DEBUG_FLAG):::VXWORKS:-r:::::",
-"vxworks-ppc750-debug","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g:::VXWORKS:-r:::::",
-"vxworks-ppc860","ccppc:-nostdinc -msoft-float -DCPU=PPC860 -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
-"vxworks-mipsle","ccmips:-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -DL_ENDIAN -EL -Wl,-EL -mips2 -mno-branch-likely -G 0 -fno-builtin -msoft-float -DCPU=MIPS32 -DMIPSEL -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r::::::::::::::::ranlibmips:",
-
-##### Compaq Non-Stop Kernel (Tandem)
-"tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown):::THIRTY_TWO_BIT:::",
 
 );
 
-my @MK1MF_Builds=qw(VC-NT VC-CE VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS
-	BC-32 BC-16 Mingw32 OS2-EMX netware-clib netware-libc);
+my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32
+	BC-16 Mingw32 OS2-EMX);
 
 my $idx = 0;
 my $idx_cc = $idx++;
@@ -606,7 +577,6 @@ my $idx_shared_cflag = $idx++;
 my $idx_shared_ldflag = $idx++;
 my $idx_shared_extension = $idx++;
 my $idx_ranlib = $idx++;
-my $idx_arflags = $idx++;
 
 my $prefix="";
 my $openssldir="";
@@ -664,11 +634,9 @@ my $openssl_thread_defines;
 my $openssl_sys_defines="";
 my $openssl_other_defines;
 my $libs;
-my $libkrb5="";
 my $target;
 my $options;
 my $symlink;
-my $make_depend=0;
 my %withargs=();
 
 my @argvcopy=@ARGV;
@@ -702,24 +670,19 @@ PROCESS_ARGS:
 		elsif (/^no-asm$/)
 		 	{
 			$no_asm=1;
-			#$flags .= "-DOPENSSL_NO_ASM ";
+			$flags .= "-DOPENSSL_NO_ASM ";
 			$openssl_other_defines .= "#define OPENSSL_NO_ASM\n";
 			}
-		elsif (/^no-err$/)
-		 	{
-			$flags .= "-DOPENSSL_NO_ERR ";
-			$openssl_other_defines .= "#define OPENSSL_NO_ERR\n";
-			}
 		elsif (/^no-hw-(.+)$/)
 			{
 			my $hw=$1;
 			$hw =~ tr/[a-z]/[A-Z]/;
-			#$flags .= "-DOPENSSL_NO_HW_$hw ";
+			$flags .= "-DOPENSSL_NO_HW_$hw ";
 			$openssl_other_defines .= "#define OPENSSL_NO_HW_$hw\n";
 			}
 		elsif (/^no-hw$/)
 			{
-			#$flags .= "-DOPENSSL_NO_HW ";
+			$flags .= "-DOPENSSL_NO_HW ";
 			$openssl_other_defines .= "#define OPENSSL_NO_HW\n";
 			}
 		elsif (/^no-dso$/)
@@ -732,7 +695,7 @@ PROCESS_ARGS:
 			{ $threads=1; }
 		elsif (/^no-shared$/)
 			{ $no_shared=1; }
-		elsif (/^shared$/ || /^-shared$/ || /^--shared$/)
+		elsif (/^shared$/)
 			{ $no_shared=0; }
 		elsif (/^no-zlib$/)
 			{ $zlib=0; }
@@ -755,45 +718,23 @@ PROCESS_ARGS:
 			my $algo=$1;
 			push @skip,$algo;
 			$algo =~ tr/[a-z]/[A-Z]/;
-			#$flags .= "-DOPENSSL_NO_$algo ";
-			#$depflags .= "-DOPENSSL_NO_$algo ";
+			$flags .= "-DOPENSSL_NO_$algo ";
+			$depflags .= "-DOPENSSL_NO_$algo ";
 			$openssl_algorithm_defines .= "#define OPENSSL_NO_$algo\n";
 			if ($algo eq "RIJNDAEL")
 				{
-				push @skip, "aes";
-				#$flags .= "-DOPENSSL_NO_AES ";
-				#$depflags .= "-DOPENSSL_NO_AES ";
+				$flags .= "-DOPENSSL_NO_AES ";
+				$depflags .= "-DOPENSSL_NO_AES ";
 				$openssl_algorithm_defines .= "#define OPENSSL_NO_AES\n";
 				}
 			if ($algo eq "DES")
 				{
 				push @skip, "mdc2";
 				$options .= " no-mdc2";
-				#$flags .= "-DOPENSSL_NO_MDC2 ";
-				#$depflags .= "-DOPENSSL_NO_MDC2 ";
+				$flags .= "-DOPENSSL_NO_MDC2 ";
+				$depflags .= "-DOPENSSL_NO_MDC2 ";
 				$openssl_algorithm_defines .= "#define OPENSSL_NO_MDC2\n";
 				}
-			if ($algo eq "EC")
-				{
-				push @skip, "ecdsa";
-				push @skip, "ecdh";
-				$options .= " no-ecdsa";
-				$options .= " no-ecdh";
-				$flags .= "-DOPENSSL_NO_ECDSA ";
-				$flags .= "-DOPENSSL_NO_ECDH ";
-				$depflags .= "-DOPENSSL_NO_ECDSA ";
-				$depflags .= "-DOPENSSL_NO_ECDH ";
-				$openssl_algorithm_defines .= "#define OPENSSL_NO_ECDSA\n";
-				$openssl_algorithm_defines .= "#define OPENSSL_NO_ECDH\n";
-				}
-			if ($algo eq "SHA" || $algo eq "SHA1")
-				{
-				push @skip, "ecdsa";
-				$options .= " no-ecdsa";
-				$flags .= "-DOPENSSL_NO_ECDSA ";
-				$depflags .= "-DOPENSSL_NO_ECDSA ";
-				$openssl_algorithm_defines .= "#define OPENSSL_NO_ECDSA\n";
-				}
 			if ($algo eq "MD5")
 				{
 				$no_md5 = 1;
@@ -906,24 +847,24 @@ $no_tls1=1 if ($no_dh);
 if ($no_ssl2)
 	{
 	push @skip,"SSL2";
-	#$flags .= "-DOPENSSL_NO_SSL2 ";
-	#$depflags .= "-DOPENSSL_NO_SSL2 ";
+	$flags .= "-DOPENSSL_NO_SSL2 ";
+	$depflags .= "-DOPENSSL_NO_SSL2 ";
 	$openssl_algorithm_defines .= "#define OPENSSL_NO_SSL2\n";
 	}
 
 if ($no_ssl3)
 	{
 	push @skip,"SSL3";
-	#$flags .= "-DOPENSSL_NO_SSL3 ";
-	#$depflags .= "-DOPENSSL_NO_SSL3 ";
+	$flags .= "-DOPENSSL_NO_SSL3 ";
+	$depflags .= "-DOPENSSL_NO_SSL3 ";
 	$openssl_algorithm_defines .= "#define OPENSSL_NO_SSL3\n";
 	}
 
 if ($no_tls1)
 	{
 	push @skip,"TLS1";
-	#$flags .= "-DOPENSSL_NO_TLS1 ";
-	#$depflags .= "-DOPENSSL_NO_TLS1 ";
+	$flags .= "-DOPENSSL_NO_TLS1 ";
+	$depflags .= "-DOPENSSL_NO_TLS1 ";
 	$openssl_algorithm_defines .= "#define OPENSSL_NO_TLS1\n";
 	}
 
@@ -950,10 +891,9 @@ print "Configuring for $target\n";
 
 &usage if (!defined($table{$target}));
 
-my $IsMK1MF=scalar grep /^$target$/,@MK1MF_Builds;
+my $IsWindows=scalar grep /^$target$/,@WinTargets;
 
 $exe_ext=".exe" if ($target eq "Cygwin");
-$exe_ext=".exe" if ($target eq "DJGPP");
 $openssldir="/usr/local/ssl" if ($openssldir eq "" and $prefix eq "");
 $prefix=$openssldir if $prefix eq "";
 
@@ -961,10 +901,10 @@ chop $openssldir if $openssldir =~ /\/$/;
 chop $prefix if $prefix =~ /\/$/;
 
 $openssldir=$prefix . "/ssl" if $openssldir eq "";
-$openssldir=$prefix . "/" . $openssldir if $openssldir !~ /(^\/|^[a-zA-Z]:[\\\/])/;
+$openssldir=$prefix . "/" . $openssldir if $openssldir !~ /^\//;
 
 
-print "IsMK1MF=$IsMK1MF\n";
+print "IsWindows=$IsWindows\n";
 
 my @fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 my $cc = $fields[$idx_cc];
@@ -989,9 +929,6 @@ my $shared_cflag = $fields[$idx_shared_cflag];
 my $shared_ldflag = $fields[$idx_shared_ldflag];
 my $shared_extension = $fields[$idx_shared_extension];
 my $ranlib = $fields[$idx_ranlib];
-my $arflags = $fields[$idx_arflags];
-
-my $no_shared_warn=0;
 
 $cflags="$flags$cflags" if ($flags ne "");
 
@@ -1001,7 +938,7 @@ if ($no_krb5
 	|| !defined($withargs{"krb5-flavor"})
 	|| $withargs{"krb5-flavor"} eq "")
 	{
-	#$cflags="-DOPENSSL_NO_KRB5 $cflags";
+	$cflags="-DOPENSSL_NO_KRB5 $cflags";
 	$options.=" no-krb5" unless $no_krb5;
 	$openssl_algorithm_defines .= "#define OPENSSL_NO_KRB5\n";
 	}
@@ -1010,17 +947,6 @@ else
 	my ($lresolv, $lpath, $lext);
 	if ($withargs{"krb5-flavor"} =~ /^[Hh]eimdal$/)
 		{
-		die "Sorry, Heimdal is currently not supported\n";
-		}
-	##### HACK to force use of Heimdal.
-	##### WARNING: Since we don't really have adequate support for Heimdal,
-	#####          using this will break the build.  You'll have to make
-	#####          changes to the source, and if you do, please send
-	#####          patches to openssl-dev@openssl.org
-	if ($withargs{"krb5-flavor"} =~ /^force-[Hh]eimdal$/)
-		{
-		warn "Heimdal isn't really supported.  Your build WILL break\n";
-		warn "If you fix the problems, please send a patch to openssl-dev\@openssl.org\n";
 		$withargs{"krb5-dir"} = "/usr/heimdal"
 			if $withargs{"krb5-dir"} eq "";
 		$withargs{"krb5-lib"} = "-L".$withargs{"krb5-dir"}.
@@ -1053,7 +979,7 @@ else
 			}
 		}
 	$withargs{"krb5-lib"} .= " -lresolv"
-		if ("$lresolv" ne "");
+		if ("$lresolv");
 	$withargs{"krb5-include"} = "-I".$withargs{"krb5-dir"}."/include"
 		if $withargs{"krb5-include"} eq "" &&
 		   $withargs{"krb5-dir"} ne "";
@@ -1112,7 +1038,7 @@ else
 #		}
 	}	
 
-$lflags="$libs$lflags" if ($libs ne "");
+$lflags="$libs$lflags"if ($libs ne "");
 
 if ($no_asm)
 	{
@@ -1120,14 +1046,9 @@ if ($no_asm)
 	$sha1_obj=$md5_obj=$rmd160_obj="";
 	}
 
-if (!$no_shared)
-	{
-	$cast_obj="";	# CAST assembler is not PIC
-	}
-
 if ($threads)
 	{
-	#$cflags=$thread_cflags;
+	$cflags=$thread_cflags;
 	$openssl_thread_defines .= $thread_defines;
 	}
 
@@ -1135,38 +1056,30 @@ if ($zlib)
 	{
 	$cflags = "-DZLIB $cflags";
 	$cflags = "-DZLIB_SHARED $cflags" if $zlib == 2;
-	$lflags = "$lflags -lz" if $zlib == 1;
+	$lflags = "$lflags -lz" if $zlib == 2;
 	}
 
 # You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
 my $shared_mark = "";
-if ($shared_target eq "")
-	{
-	$no_shared_warn = 1 if !$no_shared;
-	$no_shared = 1;
-	}
-if (!$no_shared)
+if ($shared_target ne "")
 	{
 	if ($shared_cflag ne "")
 		{
-		$cflags = "$shared_cflag -DOPENSSL_PIC $cflags";
+		$cflags = "$shared_cflag $cflags";
+		}
+	if (!$no_shared)
+		{
+		#$shared_mark = "\$(SHARED_LIBS)";
 		}
-	}
-
-if ($no_shared)
-	{
-	#$cflags="-DOPENSSL_NO_DYNAMIC_ENGINE $cflags";
-	$openssl_other_defines.="#define OPENSSL_NO_DYNAMIC_ENGINE\n";
 	}
 else
 	{
-	#$cflags="-DOPENSSL_NO_STATIC_ENGINE $cflags";
-	$openssl_other_defines.="#define OPENSSL_NO_STATIC_ENGINE\n";
+	$no_shared = 1;
 	}
 
 if ($sys_id ne "")
 	{
-	#$cflags="-DOPENSSL_SYSNAME_$sys_id $cflags";
+	$cflags="-DOPENSSL_SYSNAME_$sys_id $cflags";
 	$openssl_sys_defines="#define OPENSSL_SYSNAME_$sys_id\n";
 	}
 
@@ -1181,8 +1094,6 @@ if ($ranlib eq "")
 #$bn_obj="$bn1";
 
 $bn_obj = $bn_asm unless $bn_obj ne "";
-# bn86* is the only one implementing bn_*_part_words
-$cflags.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($bn_obj =~ /bn86/);
 
 $des_obj=$des_enc	unless ($des_obj =~ /\.o$/);
 $bf_obj=$bf_enc		unless ($bf_obj =~ /\.o$/);
@@ -1210,7 +1121,6 @@ if ($rmd160_obj =~ /\.o$/)
 $cflags =~ s/([\\\"])/\\\1/g;
 
 my $version = "unknown";
-my $version_num = "unknown";
 my $major = "unknown";
 my $minor = "unknown";
 my $shlib_version_number = "unknown";
@@ -1222,7 +1132,6 @@ open(IN,'<crypto/opensslv.h') || die "unable to read opensslv.h:$!\n";
 while (<IN>)
 	{
 	$version=$1 if /OPENSSL.VERSION.TEXT.*OpenSSL (\S+) /;
-	$version_num=$1 if /OPENSSL.VERSION.NUMBER.*0x(\S+)/;
 	$shlib_version_number=$1 if /SHLIB_VERSION_NUMBER *"([^"]+)"/;
 	$shlib_version_history=$1 if /SHLIB_VERSION_HISTORY *"([^"]*)"/;
 	}
@@ -1242,8 +1151,7 @@ if ($shlib_version_number =~ /(^[0-9]*)\.([0-9\.]*)/)
 	}
 
 open(IN,'<Makefile.org') || die "unable to read Makefile.org:$!\n";
-unlink("$Makefile.new") || die "unable to remove old $Makefile.new:$!\n" if -e "$Makefile.new";
-open(OUT,">$Makefile.new") || die "unable to create $Makefile.new:$!\n";
+open(OUT,">$Makefile") || die "unable to create $Makefile:$!\n";
 print OUT "### Generated automatically from Makefile.org by Configure.\n\n";
 my $sdirs=0;
 while (<IN>)
@@ -1288,7 +1196,6 @@ while (<IN>)
 	s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/;
 	s/^PROCESSOR=.*/PROCESSOR= $processor/;
 	s/^RANLIB=.*/RANLIB= $ranlib/;
-	s/^ARFLAGS=.*/ARFLAGS= $arflags/;
 	s/^PERL=.*/PERL= $perl/;
 	s/^KRB5_INCLUDES=.*/KRB5_INCLUDES=$withargs{"krb5-include"}/;
 	s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
@@ -1318,8 +1225,6 @@ while (<IN>)
 	}
 close(IN);
 close(OUT);
-rename($Makefile,"$Makefile.bak") || die "unable to rename $Makefile\n" if -e $Makefile;
-rename("$Makefile.new",$Makefile) || die "unable to rename $Makefile.new\n";
 
 print "CC            =$cc\n";
 print "CFLAG         =$cflags\n";
@@ -1335,10 +1240,11 @@ print "SHA1_OBJ_ASM  =$sha1_obj\n";
 print "RMD160_OBJ_ASM=$rmd160_obj\n";
 print "PROCESSOR     =$processor\n";
 print "RANLIB        =$ranlib\n";
-print "ARFLAGS       =$arflags\n";
 print "PERL          =$perl\n";
 print "KRB5_INCLUDES =",$withargs{"krb5-include"},"\n"
 	if $withargs{"krb5-include"} ne "";
+print "LIBKRB5       =",$withargs{"krb5-lib"},"\n"
+	if $withargs{"krb5-lib"} ne "";
 
 my $des_ptr=0;
 my $des_risc1=0;
@@ -1389,8 +1295,7 @@ foreach (sort split(/\s+/,$bn_ops))
 	}
 
 open(IN,'<crypto/opensslconf.h.in') || die "unable to read crypto/opensslconf.h.in:$!\n";
-unlink("crypto/opensslconf.h.new") || die "unable to remove old crypto/opensslconf.h.new:$!\n" if -e "crypto/opensslconf.h.new";
-open(OUT,'>crypto/opensslconf.h.new') || die "unable to create crypto/opensslconf.h.new:$!\n";
+open(OUT,'>crypto/opensslconf.h') || die "unable to create crypto/opensslconf.h:$!\n";
 print OUT "/* opensslconf.h */\n";
 print OUT "/* WARNING: Generated automatically from opensslconf.h.in by Configure. */\n\n";
 
@@ -1484,8 +1389,6 @@ while (<IN>)
 	}
 close(IN);
 close(OUT);
-rename("crypto/opensslconf.h","crypto/opensslconf.h.bak") || die "unable to rename crypto/opensslconf.h\n" if -e "crypto/opensslconf.h";
-rename("crypto/opensslconf.h.new","crypto/opensslconf.h") || die "unable to rename crypto/opensslconf.h.new\n";
 
 
 # Fix the date
@@ -1512,7 +1415,7 @@ print "RC2 uses u$type[$rc2_int]\n" if $rc2_int != $def_int;
 print "BF_PTR used\n" if $bf_ptr == 1; 
 print "BF_PTR2 used\n" if $bf_ptr == 2; 
 
-if($IsMK1MF) {
+if($IsWindows) {
 	open (OUT,">crypto/buildinf.h") || die "Can't open buildinf.h";
 	printf OUT <<EOF;
 #ifndef MK1MF_BUILD
@@ -1525,13 +1428,11 @@ if($IsMK1MF) {
 EOF
 	close(OUT);
 } else {
-	my $make_command = "make -f Makefile.ssl PERL=\'$perl\'";
-	my $make_targets = "";
-	$make_targets .= " links" if $symlink;
-	$make_targets .= " depend" if $depflags ne "" && $make_depend;
-	$make_targets .= " gentests" if $symlink;
-	(system $make_command.$make_targets) == 0 or exit $?
-		if $make_targets ne "";
+	(system "make -f Makefile.ssl PERL=\'$perl\' links") == 0 or exit $?
+		if $symlink;
+	### (system 'make depend') == 0 or exit $? if $depflags ne "";
+	# Run "make depend" manually if you want to be able to delete
+	# the source code files of ciphers you left out.
 	if ( $perl =~ m@^/@) {
 	    &dofile("tools/c_rehash",$perl,'^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
 	    &dofile("apps/der_chop",$perl,'^#!/', '#!%s');
@@ -1541,80 +1442,9 @@ EOF
 	    &dofile("tools/c_rehash",'/usr/local/bin/perl','^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
 	    &dofile("apps/der_chop",'/usr/local/bin/perl','^#!/', '#!%s');
 	    &dofile("apps/CA.pl",'/usr/local/bin/perl','^#!/', '#!%s');
-	}
-	if ($depflags ne "" && !$make_depend) {
-		print <<EOF;
-
-Since you've disabled at least one algorithm, you need to do the following
-before building:
-
-	make depend
-EOF
-	}
+	}	    
 }
 
-# create the ms/version32.rc file if needed
-if ($IsMK1MF) {
-	my ($v1, $v2, $v3, $v4);
-	if ($version_num =~ /(^[0-9a-f]{1})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2})/i) {
-		$v1=hex $1;
-		$v2=hex $2;
-		$v3=hex $3;
-		$v4=hex $4;
-	}
-	open (OUT,">ms/version32.rc") || die "Can't open ms/version32.rc";
-	print OUT <<EOF;
-#include <winver.h>
-
-LANGUAGE 0x09,0x01
-
-1 VERSIONINFO
-  FILEVERSION $v1,$v2,$v3,$v4
-  PRODUCTVERSION $v1,$v2,$v3,$v4
-  FILEFLAGSMASK 0x3fL
-#ifdef _DEBUG
-  FILEFLAGS 0x01L
-#else
-  FILEFLAGS 0x00L
-#endif
-  FILEOS VOS__WINDOWS32
-  FILETYPE VFT_DLL
-  FILESUBTYPE 0x0L
-BEGIN
-    BLOCK "StringFileInfo"
-    BEGIN
-	BLOCK "040904b0"
-	BEGIN
-	    // Required:	    
-	    VALUE "CompanyName", "The OpenSSL Project, http://www.openssl.org/\\0"
-	    VALUE "FileDescription", "OpenSSL Shared Library\\0"
-	    VALUE "FileVersion", "$version\\0"
-#if defined(CRYPTO)
-	    VALUE "InternalName", "libeay32\\0"
-	    VALUE "OriginalFilename", "libeay32.dll\\0"
-#elif defined(SSL)
-	    VALUE "InternalName", "ssleay32\\0"
-	    VALUE "OriginalFilename", "ssleay32.dll\\0"
-#endif
-	    VALUE "ProductName", "The OpenSSL Toolkit\\0"
-	    VALUE "ProductVersion", "$version\\0"
-	    // Optional:
-	    //VALUE "Comments", "\\0"
-	    VALUE "LegalCopyright", "Copyright <20> 1998-2002 The OpenSSL Project. Copyright <20> 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved.\\0"
-	    //VALUE "LegalTrademarks", "\\0"
-	    //VALUE "PrivateBuild", "\\0"
-	    //VALUE "SpecialBuild", "\\0"
-	END
-    END
-    BLOCK "VarFileInfo"
-    BEGIN
-        VALUE "Translation", 0x409, 0x4b0
-    END
-END
-EOF
-	close(OUT);
-  }
-  
 print <<EOF;
 
 Configured for $target.
@@ -1627,16 +1457,6 @@ applications as the compiler options required on this system are not known.
 See file INSTALL for details if you need multi-threading.
 EOF
 
-print <<\EOF if ($no_shared_warn);
-
-You gave the option 'shared'.  Normally, that would give you shared libraries.
-Unfortunately, the OpenSSL configuration doesn't include shared library support
-for this platform yet, so it will pretend you gave the option 'no-shared'.  If
-you can inform the developpers (openssl-dev\@openssl.org) how to support shared
-libraries on this platform, they will at least look at it and try their best
-(but please first make sure you have tried with a current version of OpenSSL).
-EOF
-
 exit(0);
 
 sub usage
@@ -1713,7 +1533,7 @@ sub print_table_entry
 	my $bn_ops,my $bn_obj,my $des_obj,my $bf_obj,
 	my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
 	my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag,
-	my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags)=
+	my $shared_ldflag,my $shared_extension,my $ranlib)=
 	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 			
 	print <<EOF
@@ -1741,7 +1561,6 @@ sub print_table_entry
 \$shared_ldflag = $shared_ldflag
 \$shared_extension = $shared_extension
 \$ranlib       = $ranlib
-\$arflags      = $arflags
 EOF
 	}
 

FAQ

@@ -9,7 +9,6 @@ OpenSSL  -  Frequently Asked Questions
 * Where can I get a compiled version of OpenSSL?
 * Why aren't tools like 'autoconf' and 'libtool' used?
 * What is an 'engine' version?
-* How do I check the authenticity of the OpenSSL distribution?
 
 [LEGAL] Legal questions
 
@@ -37,15 +36,9 @@ OpenSSL  -  Frequently Asked Questions
 * Why does the linker complain about undefined symbols?
 * Why does the OpenSSL test fail with "bc: command not found"?
 * Why does the OpenSSL test fail with "bc: 1 no implemented"?
-* Why does the OpenSSL test fail with "bc: stack empty"?
 * Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
 * Why does the OpenSSL compilation fail with "ar: command not found"?
 * Why does the OpenSSL compilation fail on Win32 with VC++?
-* What is special about OpenSSL on Redhat?
-* Why does the OpenSSL compilation fail on MacOS X?
-* Why does the OpenSSL test suite fail on MacOS X?
-* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
-* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
 
 [PROG] Questions about programming with OpenSSL
 
@@ -59,7 +52,6 @@ OpenSSL  -  Frequently Asked Questions
 * Why can't the OpenSSH configure script detect OpenSSL?
 * Can I use OpenSSL's SSL library with non-blocking I/O?
 * Why doesn't my server application receive a client certificate?
-* Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
 
 ===============================================================================
 
@@ -68,7 +60,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.7c was released on September 30, 2003.
+OpenSSL 0.9.6d was released on May 9, 2002.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -116,14 +108,11 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 
 * Where can I get a compiled version of OpenSSL?
 
-You can finder pointers to binary distributions in
-http://www.openssl.org/related/binaries.html .
-
 Some applications that use OpenSSL are distributed in binary form.
 When using such an application, you don't need to install OpenSSL
 yourself; the application will include the required parts (e.g. DLLs).
 
-If you want to build OpenSSL on a Windows system and you don't have
+If you want to install OpenSSL on a Windows system and you don't have
 a C compiler, read the "Mingw32" section of INSTALL.W32 for information
 on how to obtain and install the free GNU C compiler.
 
@@ -142,19 +131,6 @@ hardware. This was realized in a special release '0.9.6-engine'. With
 version 0.9.7 (not yet released) the changes were merged into the main
 development line, so that the special release is no longer necessary.
 
-* How do I check the authenticity of the OpenSSL distribution?
-
-We provide MD5 digests and ASC signatures of each tarball.
-Use MD5 to check that a tarball from a mirror site is identical:
-
-   md5sum TARBALL | awk '{print $1;}' | cmp - TARBALL.md5
-
-You can check authenticity using pgp or gpg. You need the OpenSSL team
-member public key used to sign it (download it from a key server). Then
-just do:
-
-   pgp TARBALL.asc
-
 [LEGAL] =======================================================================
 
 * Do I need patent licenses to use OpenSSL?
@@ -192,30 +168,18 @@ for permission to use their software with OpenSSL.
 
 Cryptographic software needs a source of unpredictable data to work
 correctly.  Many open source operating systems provide a "randomness
-device" (/dev/urandom or /dev/random) that serves this purpose.
-All OpenSSL versions try to use /dev/urandom by default; starting with
-version 0.9.7, OpenSSL also tries /dev/random if /dev/urandom is not
-available.
+device" that serves this purpose.  On other systems, applications have
+to call the RAND_add() or RAND_seed() function with appropriate data
+before generating keys or performing public key encryption.
+(These functions initialize the pseudo-random number generator, PRNG.)
 
-On other systems, applications have to call the RAND_add() or
-RAND_seed() function with appropriate data before generating keys or
-performing public key encryption. (These functions initialize the
-pseudo-random number generator, PRNG.)  Some broken applications do
-not do this.  As of version 0.9.5, the OpenSSL functions that need
-randomness report an error if the random number generator has not been
-seeded with at least 128 bits of randomness.  If this error occurs and
-is not discussed in the documentation of the application you are
-using, please contact the author of that application; it is likely
-that it never worked correctly.  OpenSSL 0.9.5 and later make the
-error visible by refusing to perform potentially insecure encryption.
-
-If you are using Solaris 8, you can add /dev/urandom and /dev/random
-devices by installing patch 112438 (Sparc) or 112439 (x86), which are
-available via the Patchfinder at <URL: http://sunsolve.sun.com>
-(Solaris 9 includes these devices by default). For /dev/random support
-for earlier Solaris versions, see Sun's statement at
-<URL: http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski>
-(the SUNWski package is available in patch 105710).
+Some broken applications do not do this.  As of version 0.9.5, the
+OpenSSL functions that need randomness report an error if the random
+number generator has not been seeded with at least 128 bits of
+randomness.  If this error occurs, please contact the author of the
+application you are using.  It is likely that it never worked
+correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
+to perform potentially insecure encryption.
 
 On systems without /dev/urandom and /dev/random, it is a good idea to
 use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
@@ -248,6 +212,13 @@ OpenSSL command line tools. Applications using the OpenSSL library
 provide their own configuration options to specify the entropy source,
 please check out the documentation coming the with application.
 
+For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
+installing the SUNski package from Sun patch 105710-01 (Sparc) which
+adds a /dev/random device and make sure it gets used, usually through
+$RANDFILE.  There are probably similar patches for the other Solaris
+versions.  However, be warned that /dev/random is usually a blocking
+device, which may have some effects on OpenSSL.
+
 
 * Why do I get an "unable to write 'random state'" error message?
 
@@ -424,17 +395,6 @@ and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
 for download instructions) can be safely used, for example.
 
 
-* Why does the OpenSSL test fail with "bc: stack empty"?
-
-On some DG/ux versions, bc seems to have a too small stack for calculations
-that the OpenSSL bntest throws at it.  This gets triggered when you run the
-test suite (using "make test").  The message returned is "bc: stack empty".
-
-The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
-for download instructions) can be safely used, for example.
-
-
 * Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
 
 On some Alpha installations running Tru64 Unix and Compaq C, the compilation
@@ -493,104 +453,12 @@ and then redo the compilation.  What you should really do is make sure
 Sometimes, you may get reports from VC++ command line (cl) that it
 can't find standard include files like stdio.h and other weirdnesses.
 One possible cause is that the environment isn't correctly set up.
-To solve that problem for VC++ versions up to 6, one should run
-VCVARS32.BAT which is found in the 'bin' subdirectory of the VC++
-installation directory (somewhere under 'Program Files').  For VC++
-version 7 (and up?), which is also called VS.NET, the file is called
-VSVARS32.BAT instead.
-This needs to be done prior to running NMAKE, and the changes are only
-valid for the current DOS session.
+To solve that problem, one should run VCVARS32.BAT which is found in
+the 'bin' subdirectory of the VC++ installation directory (somewhere
+under 'Program Files').  This needs to be done prior to running NMAKE,
+and the changes are only valid for the current DOS session.
 
 
-* What is special about OpenSSL on Redhat?
-
-Red Hat Linux (release 7.0 and later) include a preinstalled limited
-version of OpenSSL. For patent reasons, support for IDEA, RC5 and MDC2
-is disabled in this version. The same may apply to other Linux distributions.
-Users may therefore wish to install more or all of the features left out.
-
-To do this you MUST ensure that you do not overwrite the openssl that is in
-/usr/bin on your Red Hat machine. Several packages depend on this file,
-including sendmail and ssh. /usr/local/bin is a good alternative choice. The
-libraries that come with Red Hat 7.0 onwards have different names and so are
-not affected. (eg For Red Hat 7.2 they are /lib/libssl.so.0.9.6b and
-/lib/libcrypto.so.0.9.6b with symlinks /lib/libssl.so.2 and
-/lib/libcrypto.so.2 respectively).
-
-Please note that we have been advised by Red Hat attempting to recompile the
-openssl rpm with all the cryptography enabled will not work. All other
-packages depend on the original Red Hat supplied openssl package. It is also
-worth noting that due to the way Red Hat supplies its packages, updates to
-openssl on each distribution never change the package version, only the
-build number. For example, on Red Hat 7.1, the latest openssl package has
-version number 0.9.6 and build number 9 even though it contains all the
-relevant updates in packages up to and including 0.9.6b.
-
-A possible way around this is to persuade Red Hat to produce a non-US
-version of Red Hat Linux.
-
-FYI: Patent numbers and expiry dates of US patents:
-MDC-2: 4,908,861 13/03/2007
-IDEA:  5,214,703 25/05/2010
-RC5:   5,724,428 03/03/2015
-
-
-* Why does the OpenSSL compilation fail on MacOS X?
-
-If the failure happens when trying to build the "openssl" binary, with
-a large number of undefined symbols, it's very probable that you have
-OpenSSL 0.9.6b delivered with the operating system (you can find out by
-running '/usr/bin/openssl version') and that you were trying to build
-OpenSSL 0.9.7 or newer.  The problem is that the loader ('ld') in
-MacOS X has a misfeature that's quite difficult to go around.
-Look in the file PROBLEMS for a more detailed explanation and for possible
-solutions.
-
-
-* Why does the OpenSSL test suite fail on MacOS X?
-
-If the failure happens when running 'make test' and the RC4 test fails,
-it's very probable that you have OpenSSL 0.9.6b delivered with the
-operating system (you can find out by running '/usr/bin/openssl version')
-and that you were trying to build OpenSSL 0.9.6d.  The problem is that
-the loader ('ld') in MacOS X has a misfeature that's quite difficult to
-go around and has linked the programs "openssl" and the test programs
-with /usr/lib/libcrypto.dylib and /usr/lib/libssl.dylib instead of the
-libraries you just built.
-Look in the file PROBLEMS for a more detailed explanation and for possible
-solutions.
-
-* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
-
-Failure in BN_sqr test is most likely caused by a failure to configure the
-toolkit for current platform or lack of support for the platform in question.
-Run './config -t' and './apps/openssl version -p'. Do these platform
-identifiers match? If they don't, then you most likely failed to run
-./config and you're hereby advised to do so before filing a bug report.
-If ./config itself fails to run, then it's most likely problem with your
-local environment and you should turn to your system administrator (or
-similar). If identifiers match (and/or no alternative identifier is
-suggested by ./config script), then the platform is unsupported. There might
-or might not be a workaround. Most notably on SPARC64 platforms with GNU
-C compiler you should be able to produce a working build by running
-'./config -m32'. I understand that -m32 might not be what you want/need,
-but the build should be operational. For further details turn to
-<openssl-dev@openssl.org>.
-
-* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
-
-As of 0.9.7 assembler routines were overhauled for position independence
-of the machine code, which is essential for shared library support. For
-some reason OpenBSD is equipped with an out-of-date GNU assembler which
-finds the new code offensive. To work around the problem, configure with
-no-asm (and sacrifice a great deal of performance) or patch your assembler
-according to <URL: http://www.openssl.org/~appro/gas-1.92.3.OpenBSD.patch>.
-For your convenience a pre-compiled replacement binary is provided at
-<URL: http://www.openssl.org/~appro/gas-1.92.3.static.aout.bin>.
-Reportedly elder *BSD a.out platforms also suffer from this problem and
-remedy should be same. Provided binary is statically linked and should be
-working across wider range of *BSD branches, not just OpenBSD.
-
 [PROG] ========================================================================
 
 * Is OpenSSL thread-safe?
@@ -649,26 +517,26 @@ built OpenSSL with /MD your application must use /MD and cannot use /MDd.
 * How do I read or write a DER encoded buffer using the ASN1 functions?
 
 You have two options. You can either use a memory BIO in conjunction
-with the i2d_*_bio() or d2i_*_bio() functions or you can use the
-i2d_*(), d2i_*() functions directly. Since these are often the
+with the i2d_XXX_bio() or d2i_XXX_bio() functions or you can use the
+i2d_XXX(), d2i_XXX() functions directly. Since these are often the
 cause of grief here are some code fragments using PKCS7 as an example:
 
- unsigned char *buf, *p;
- int len;
+unsigned char *buf, *p;
+int len;
 
- len = i2d_PKCS7(p7, NULL);
- buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */
- p = buf;
- i2d_PKCS7(p7, &p);
+len = i2d_PKCS7(p7, NULL);
+buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */
+p = buf;
+i2d_PKCS7(p7, &p);
 
 At this point buf contains the len bytes of the DER encoding of
 p7.
 
 The opposite assumes we already have len bytes in buf:
 
- unsigned char *p;
- p = buf;
- p7 = d2i_PKCS7(NULL, &p, len);
+unsigned char *p;
+p = buf;
+p7 = d2i_PKCS7(NULL, &p, len);
 
 At this point p7 contains a valid PKCS7 structure of NULL if an error
 occurred. If an error occurred ERR_print_errors(bio) should give more
@@ -735,7 +603,6 @@ The general answer is to check the config.log file generated when running
 the OpenSSH configure script. It should contain the detailed information
 on why the OpenSSL library was not detected or considered incompatible.
 
-
 * Can I use OpenSSL's SSL library with non-blocking I/O?
 
 Yes; make sure to read the SSL_get_error(3) manual page!
@@ -757,13 +624,5 @@ if explicitly asked by the server. Use the SSL_VERIFY_PEER flag of the
 SSL_CTX_set_verify() function to enable the use of client certificates.
 
 
-* Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
-
-For OpenSSL 0.9.7 the OID table was extended and corrected. In earlier
-versions, uniqueIdentifier was incorrectly used for X.509 certificates.
-The correct name according to RFC2256 (LDAP) is x500UniqueIdentifier.
-Change your code to use the new name when compiling against OpenSSL 0.9.7.
-
-
 ===============================================================================
 

INSTALL

@@ -2,12 +2,8 @@
  INSTALLATION ON THE UNIX PLATFORM
  ---------------------------------
 
- [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X)
-  and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS,
-  INSTALL.MacOS and INSTALL.NW.
-  
-  This document describes installation on operating systems in the Unix
-  family.]
+ [Installation on Windows, OpenVMS and MacOS (before MacOS X) is described
+  in INSTALL.W32, INSTALL.VMS and INSTALL.MacOS.]
 
  To install OpenSSL, you will need:
 
@@ -141,11 +137,8 @@
      the failure that aren't problems in OpenSSL itself (like missing
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
-     message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/support/rt2.html and will be forwarded to a
-     public mailing list). Include the output of "make report" in your message.
-     Please check out the request tracker. Maybe the bug was already
-     reported or has already been fixed.
+     message will be forwarded to a public mailing list).  Include the
+     output of "make report" in your message.
 
      [If you encounter assembler error messages, try the "no-asm"
      configuration option as an immediate fix.]
@@ -160,11 +153,10 @@
      If a test fails, look at the output.  There may be reasons for
      the failure that isn't a problem in OpenSSL itself (like a missing
      or malfunctioning bc).  If it is a problem with OpenSSL itself,
-     try removing any compiler optimization flags from the CFLAG line
+     try removing any compiler optimization flags from the CFLAGS line
      in Makefile.ssl and run "make clean; make". Please send a bug
      report to <openssl-bugs@openssl.org>, including the output of
-     "make report" in order to be added to the request tracker at
-     http://www.openssl.org/support/rt2.html.
+     "make report".
 
   4. If everything tests ok, install OpenSSL with
 
@@ -298,37 +290,3 @@
  targets for shared library creation, like linux-shared.  Those targets
  can currently be used on their own just as well, but this is expected
  to change in future versions of OpenSSL.
-
- Note on random number generation
- --------------------------------
-
- Availability of cryptographically secure random numbers is required for
- secret key generation. OpenSSL provides several options to seed the
- internal PRNG. If not properly seeded, the internal PRNG will refuse
- to deliver random bytes and a "PRNG not seeded error" will occur.
- On systems without /dev/urandom (or similar) device, it may be necessary
- to install additional support software to obtain random seed.
- Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
- and the FAQ for more information.
-
- Note on support for multiple builds
- -----------------------------------
-
- OpenSSL is usually built in it's source tree.  Unfortunately, this doesn't
- support building for multiple platforms from the same source tree very well.
- It is however possible to build in a separate tree through the use of lots
- of symbolic links, which should be prepared like this:
-
-	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
-	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
-	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
-		mkdir -p `dirname $F`
-		rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
-		echo $F '->' $OPENSSL_SOURCE/$F
-	done
-	make -f Makefile.org clean
-
- OPENSSL_SOURCE is an environment variable that contains the absolute (this
- is important!) path to the OpenSSL source tree.
-
- Also, operations like 'make update' should still be made in the source tree.

INSTALL.DJGPP

@@ -1,34 +0,0 @@
-
- 
- INSTALLATION ON THE DOS PLATFORM WITH DJGPP
- -------------------------------------------
-
- Openssl has been ported to DOS, but only with long filename support. If
- you wish to compile on native DOS with 8+3 filenames, you will have to
- tweak the installation yourself, including renaming files with illegal
- or duplicate names.
-
- You should have a full DJGPP environment installed, including the
- latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
- requires that PERL and BC also be installed.
-
- All of these can be obtained from the usual DJGPP mirror sites, such
- as "ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp". You also need to
- have the WATT-32 networking package installed before you try to compile
- openssl. This can be obtained from "http://www.bgnett.no/~giva/".
- The Makefile assumes that the WATT-32 code is in the directory
- specified by the environment variable WATT_ROOT. If you have watt-32
- in directory "watt32" under your main DJGPP directory, specify
- WATT_ROOT="/dev/env/DJDIR/watt32".
-
- To compile openssl, start your BASH shell. Then configure for DOS by
- running "./Configure" with appropriate arguments. The basic syntax for
- DOS is:
- ./Configure no-threads --prefix=/dev/env/DJDIR DJGPP
- 
- You may run out of DPMI selectors when running in a DOS box under
- Windows. If so, just close the BASH shell, go back to Windows, and
- restart BASH. Then run "make" again.
-
- Building openssl under DJGPP has been tested with DJGPP 2.03,
- GCC 2.952, GCC 2.953, perl 5.005_02 and perl 5.006_01.

INSTALL.NW

@@ -1,437 +0,0 @@
-
-INSTALLATION ON THE NETWARE PLATFORM
-------------------------------------
-
-Notes about building OpenSSL for NetWare.
-
-
-BUILD PLATFORM:
----------------
-The build scripts (batch files, perl scripts, etc) have been developed and
-tested on W2K.  The scripts should run fine on other Windows
-platforms (NT, Win9x, WinXP) but they haven't been tested.  They may require 
-some modifications.
-
-
-Supported NetWare Platforms - NetWare 5.x, NetWare 6.x:
-------------------------------------------
-OpenSSL uses the WinSock interfaces introduced in NetWare 5.  Therefore,
-previous versions of NetWare, 4.x and 3.x, are not supported.
-
-On NetWare there are two c-runtime libraries.  There is the legacy CLIB 
-interfaces and the newer LibC interfaces.  Being ANSI-C libraries, the 
-functionality in CLIB and LibC is similar but the LibC interfaces are built 
-using Novell Kernal Services (NKS) which is designed to leverage 
-multi-processor environments.
-
-The NetWare port of OpenSSL can configured to build using CLIB or LibC.  The 
-CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LibC 
-build was developed and tested using the NetWare 6.0 FCS.  
-
-The necessary LibC functionality ships with NetWare 6.  However, earlier 
-NetWare 5.x versions will require updates in order to run the OpenSSL LibC
-build.
-
-
-REQUIRED TOOLS:
----------------
-Based upon the configuration and build options used, some or all of the
-following tools may be required:
-
-
-* Perl for Win32 - required (http://www.activestate.com/ActivePerl)
-   Used to run the various perl scripts on the build platform.
-
-
-* Perl 5.8.0 for NetWare v3.20 (or later) - required 
-   (http://developer.novell.com) Used to run the test script on NetWare 
-   after building.
-
-
-* Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare - required:
-   Provides command line tools used for building.
-
-   Tools:
-   mwccnlm.exe  - C/C++ Compiler for NetWare
-   mwldnlm.exe  - Linker for NetWare
-   mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
-
-
-* Assemblers - optional:
-   If you intend to build using the assembly options you will need an
-   assembler.  Work has been completed to support two assemblers, Metrowerks
-   and NASM.  However, during development, a bug was found in the Metrowerks
-   assembler which generates incorrect code.  Until this problem is fixed,
-   the Metrowerks assembler cannot be used.
-
-   mwasmnlm.exe - Metrowerks x86 assembler - part of CodeWarrior tools.
-         (version 2.2 Built Aug 23, 1999 - not useable due to code
-          generation bug)
-
-   nasmw.exe - Netwide Assembler NASM
-         version 0.98 was used in development and testing
-
-* Make Tool - required:
-   In order to build you will need a make tool.  Two make tools are
-   supported, GNU make (gmake.exe) or Microsoft nmake.exe.
-
-   gmake.exe - GNU make for Windows (version 3.75 used for development)
-         http://www.gnu.org/software/make/make.html
-
-   nmake.exe - Microsoft make (Version 6.00.8168.0 used for development)
-
-
-* Novell Developer Kit (NDK) - required: (http://developer.novell.com)
-
-   CLIB - BUILDS:
-
-      WinSock2 Developer Components for NetWare:
-         For initial development, the October 27, 2000 version was used.
-         However, future versions should also work.
-
-         NOTE:  The WinSock2 components include headers & import files for
-         NetWare, but you will also need the winsock2.h and supporting
-         headers (pshpack4.h, poppack.h, qos.h) delivered in the
-         Microsoft SDK.  Note: The winsock2.h support headers may change
-         with various versions of winsock2.h.  Check the dependencies
-         section on the NDK WinSock2 download page for the latest
-         information on dependencies.
-
-
-      NLM and NetWare libraries for C (including CLIB and XPlat):
-			If you are going to build a CLIB version of OpenSSL, you will
-			need the CLIB headers and imports.  The March, 2001 NDK release or 
-			later is recommended.
-
-         Earlier versions should work but haven't been tested.  In recent
-         versions the import files have been consolidated and function
-         names moved.  This means you may run into link problems
-         (undefined symbols) when using earlier versions.   The functions
-         are available in earlier versions, but you will have to modifiy
-         the make files to include additional import files (see
-         openssl\util\pl\netware.pl).
-
-
-   LIBC - BUILDS:
-   
-      Libraries for C (LibC) - LibC headers and import files
-			If you are going to build a LibC version of OpenSSL, you will
-			need the LibC headers and imports.  The March 14, 2002 NDK release or
-			later is required.  
-         
-         NOTE: The LibC SDK includes the necessary WinSock2 support.  It
-         It is not necessary to download the WinSock2 Developer when building
-         for LibC.
-
-
-BUILDING:
----------
-Before building, you will need to set a few environment variables.  You can
-set them manually or you can modify the "netware\set_env.bat" file.
-
-The set_env.bat file is a template you can use to set up the path
-and environment variables you will need to build.  Modify the
-various lines to point to YOUR tools and run set_env.bat.
-
-	netware\set_env.bat [target]
-	
-      target        - "netware-clib" - CLib NetWare build
-                    - "netware-libc" - LibC NetWare build
-
-If you don't use set_env.bat, you will need to set up the following
-environment variables:
-
-   path - Set path to point to the tools you will use.
-
-   MWCIncludes - The location of the NDK include files.
-         
-			CLIB ex: set MWCIncludes=c:\ndk\nwsdk\include\nlm
-			LibC ex: set MWCIncludes=c:\ndk\libc\include
-
-   PRELUDE - The absolute path of the prelude object to link with.  For
-			a CLIB build it is recommended you use the "nwpre.obj" file shipped
-			with the Metrowerks PDK for NetWare.  For a LibC build you should 
-			use the "libcpre.o" file delivered with the LibC NDK components.
-         
-			CLIB ex: set PRELUDE=c:\codewar\novell support\metrowerks support\
-                               libraries\runtime\nwpre.obj
-										 
-			LibC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
-
-   IMPORTS - The locaton of the NDK import files.
-         
-			CLIB ex: set IMPORTS=c:\ndk\nwsdk\imports
-			LibC ex: set IMPORTS=c:\ndk\libc\imports
-
-
-In order to build, you need to run the Perl scripts to configure the build
-process and generate a make file.  There is a batch file,
-"netware\build.bat", to automate the process.
-
-Build.bat runs the build configuration scripts and generates a make file.
-If an assembly option is specified, it also runs the scripts to generate 
-the assembly code.  Always run build.bat from the "openssl" directory.
-
-   netware\build [target] [debug opts] [assembly opts] [configure opts]
-	
-      target        - "netware-clib" - CLib NetWare build
-                    - "netware-libc" - LibC NetWare build
- 
-      debug opts    - "debug"  - build debug
-
-      assembly opts - "nw-mwasm" - use Metrowerks assembler
-                      "nw-nasm"  - use NASM assembler
-                      "no-asm"   - don't use assembly
-
-      configure opts- all unrecognized arguments are passed to the
-                       perl configure script
-
-   examples:
-	
-		CLIB build, debug, without assembly:
-			netware\build.bat netware-clib debug no-asm
-		
-		LibC build, non-debug, using NASM assembly:
-			netware\build.bat netware-libc nw-nasm
-		
-Running build.bat generates a make file to be processed by your make 
-tool (gmake or nmake):
-
-   CLIB ex: gmake -f netware\nlm_clib.mak 
-   LibC ex: gmake -f netware\nlm_libc.mak 
-
-
-You can also run the build scripts manually if you do not want to use the
-build.bat file.  Run the following scripts in the "\openssl"
-subdirectory (in the order listed below):
-
-   perl configure no-asm [other config opts] [netware-clib|netware-libc]
-      configures no assembly build for specified netware environment
-		(CLIB or LibC).
-
-   perl util\mkfiles.pl >MINFO
-      generates a listing of source files (used by mk1mf)
-
-   perl util\mk1mf.pl no-asm [other config opts] [netware-clib|netware-libc >netware\nlm.mak
-      generates the makefile for NetWare
-
-   gmake -f netware\nlm.mak
-      build with the make tool (nmake.exe also works)
-
-NOTE:  If you are building using the assembly option, you must also run the
-various Perl scripts to generate the assembly files.  See build.bat
-for an example of running the various assembly scripts.  You must use the
-"no-asm" option to build without assembly.  The configure and mk1mf scripts
-also have various other options.  See the scripts for more information.
-
-
-The output from the build is placed in the following directories:
-
-   CLIB Debug build:
-      out_nw_clib.dbg     - static libs & test nlm(s)
-      tmp_nw_clib.dbg     - temporary build files
-      outinc_nw_clib      - necessary include files
-
-   CLIB Non-debug build:
-      out_nw_clib         - static libs & test nlm(s)
-      tmp_nw_clib         - temporary build files
-      outinc_nw_clib      - necesary include files
-
-   LibC Debug build:
-      out_nw_libc.dbg     - static libs & test nlm(s)
-      tmp_nw_libc.dbg     - temporary build files
-      outinc_nw_libc      - necessary include files
-
-   LibC Non-debug build:
-      out_nw_libc         - static libs & test nlm(s)
-      tmp_nw_libc         - temporary build files
-      outinc_nw_libc      - necesary include files
-
-
-TESTING:
---------
-The build process creates the OpenSSL static libs ( crypto.lib, ssl.lib,
-rsaglue.lib ) and several test programs.  You should copy the test programs
-to your NetWare server and run the tests.
-
-The batch file "netware\cpy_tests.bat" will copy all the necessary files
-to your server for testing.  In order to run the batch file, you need a
-drive mapped to your target server.  It will create an "OpenSSL" directory
-on the drive and copy the test files to it.  CAUTION: If a directory with the
-name of "OpenSSL" already exists, it will be deleted.
-
-To run cpy_tests.bat:
-
-   netware\cpy_tests [output directory] [NetWare drive]
-
-      output directory - "out_nw_clib.dbg", "out_nw_libc", etc.
-      NetWare drive    - drive letter of mapped drive
-
-      CLIB ex: netware\cpy_tests out_nw_clib m:
-      LibC ex: netware\cpy_tests out_nw_libc m:
-
-
-The Perl script, "do_tests.pl", in the "OpenSSL" directory on the server
-should be used to execute the tests.  Before running the script, make sure
-your SEARCH PATH includes the "OpenSSL" directory.  For example, if you
-copied the files to the "sys:" volume you use the command:
-
-   SEARCH ADD SYS:\OPENSSL
-
-
-To run do_tests.pl type (at the console prompt):
-
-   perl \openssl\do_tests.pl [options]
-
-      options:
-         -p    - pause after executing each test
-
-The do_tests.pl script generates a log file "\openssl\test_out\tests.log"
-which should be reviewed for errors.  Any errors will be denoted by the word
-"ERROR" in the log.
-
-NOTE:  Currently (11/2002), the LibC test nlms report an error while loading
-       when launched from the perl script (do_tests.pl).  The problems are 
-       being addressed by the LibC development team and should be fixed in the
-       next release.  Until the problems are corrected, the LibC test nlms 
-       will have to be executed manually.  
-
-
-DEVELOPING WITH THE OPENSSL SDK:
---------------------------------
-Now that everything is built and tested, you are ready to use the OpenSSL
-libraries in your development.
-
-There is no real installation procedure, just copy the static libs and
-headers to your build location.  The libs (crypto.lib & ssl.lib) are
-located in the appropriate "out_nw_XXXX" directory 
-(out_nw_clib, out_nw_libc, etc).  
-
-The headers are located in the appropriate "outinc_nw_XXX" directory 
-(outinc_nw_clib, outinc_nw_libc).  
-
-One suggestion is to create the following directory 
-structure for the OpenSSL SDK:
-
-   \openssl
-      |- bin
-      |   |- openssl.nlm
-      |   |- (other tests you want)
-      |
-      |- lib
-      |   | - crypto.lib
-      |   | - ssl.lib
-      |
-      |- include
-      |   | - openssl
-      |   |    | - (all the headers in "outinc_nw\openssl")
-
-
-The program "openssl.nlm" can be very useful.  It has dozens of
-options and you may want to keep it handy for debugging, testing, etc.
-
-When building your apps using OpenSSL, define "NETWARE".  It is needed by
-some of the OpenSSL headers.  One way to do this is with a compile option,
-for example "-DNETWARE".
-
-
-
-NOTES:
-------
-
-Resource leaks in Tests
-------------------------
-Some OpenSSL tests do not clean up resources and NetWare reports
-the resource leaks when the tests unload.  If this really bugs you,
-you can stop the messages by setting the developer option off at the console
-prompt (set developer option = off).  Or better yet, fix the tests to
-clean up the resources!
-
-
-Multi-threaded Development
----------------------------
-The NetWare version of OpenSSL is thread-safe however, multi-threaded
-applications must provide the necessary locking function callbacks.  This
-is described in doc\threads.doc.  The file "openssl\crypto\threads\mttest.c"
-is a multi-threaded test program and demonstrates the locking functions.
-
-
-What is openssl2.nlm?
----------------------
-The openssl program has numerous options and can be used for many different
-things.  Many of the options operate in an interactive mode requiring the
-user to enter data.  Because of this, a default screen is created for the
-program.  However, when running the test script it is not desirable to
-have a seperate screen.  Therefore, the build also creates openssl2.nlm.
-Openssl2.nlm is functionally identical but uses the console screen.
-Openssl2 can be used when a non-interactive mode is desired.
-
-NOTE:  There are may other possibilities (command line options, etc)
-which could have been used to address the screen issue.  The openssl2.nlm
-option was chosen because it impacted only the build not the code.
-
-
-Why only static libraries?
---------------------------
-Globals, globals, and more globals.  The OpenSSL code uses many global
-variables that are allocated and initialized when used for the first time.
-
-On NetWare, most applications (at least historically) run in the kernel.
-When running in the kernel, there is one instance of global variables.
-For regular application type NLM(s) this isn't a problem because they are
-the only ones using the globals.  However, for a library NLM (an NLM which
-exposes functions and has no threads of execution), the globals cause
-problems.  Applications could inadvertently step on each other if they
-change some globals.  Even worse, the first application that triggers a
-global to be allocated and initialized has the allocated memory charged to
-itself.  Now when that application unloads, NetWare will clean up all the
-applicaton's memory.  The global pointer variables inside OpenSSL now
-point to freed memory.  An abend waiting to happen!
-
-To work correctly in the kernel, library NLM(s) that use globals need to
-provide a set of globals (instance data) for each application.  Another
-option is to require the library only be loaded in a protected address
-space along with the application using it.
-
-Modifying the OpenSSL code to provide a set of globals (instance data) for
-each application isn't technically difficult, but due to the large number
-globals it would require substantial code changes and it wasn't done.  Hence,
-the build currently only builds static libraries which are then linked
-into each application.
-
-NOTE:  If you are building a library NLM that uses the OpenSSL static
-libraries, you will still have to deal with the global variable issue.
-This is because when you link in the OpenSSL code you bring in all the
-globals.  One possible solution for the global pointer variables is to
-register memory functions with OpenSSL which allocate memory and charge it
-to your library NLM (see the function CRYPTO_set_mem_functions).  However,
-be aware that now all memory allocated by OpenSSL is charged to your NLM.
-
-
-CodeWarrior Tools and W2K
----------------------------
-There have been problems reported with the CodeWarrior Linker
-(mwldnlm.exe) in the PDK 2.1 for NetWare when running on Windows 2000.  The
-problems cause the link step to fail.  The only work around is to obtain an
-updated linker from Metrowerks.  It is expected Metrowerks will release
-PDK 3.0 (in beta testing at this time - May, 2001) in the near future which
-will fix these problems.
-
-
-Makefile "vclean"
-------------------
-The generated makefile has a "vclean" target which cleans up the build
-directories.  If you have been building successfully and suddenly
-experience problems, use "vclean" (gmake -f netware\nlm.mak vclean) and retry.
-
-
-"Undefined Symbol" Linker errors
---------------------------------
-There have been linker errors reported when doing a CLIB build.  The problems
-occur because some versions of the CLIB SDK import files inadvertently 
-left out some symbols.  One symbol in particular is "_lrotl".  The missing
-functions are actually delivered in the binaries, but they were left out of
-the import files.  The issues should be fixed in the September 2001 release 
-of the NDK.  If you experience the problems you can temporarily
-work around it by manually adding the missing symbols to your version of 
-"clib.imp".  

INSTALL.OS2

@@ -20,12 +20,3 @@
 
  If that finishes successfully you will find the libraries and programs in the
  "out" directory.
-
- Alternatively, you can make a dynamic build that puts the library code into
- crypto.dll and ssl.dll by running
-
- > make -f os2-emx-dll.mak
-
- This will build the above mentioned dlls and a matching pair of import
- libraries in the "out_dll" directory along with the set of test programs
- and the openssl application.

INSTALL.W32

@@ -2,28 +2,19 @@
  INSTALLATION ON THE WIN32 PLATFORM
  ----------------------------------
 
- [Instructions for building for Windows CE can be found in INSTALL.WCE]
-
  Heres a few comments about building OpenSSL in Windows environments.  Most
  of this is tested on Win32 but it may also work in Win 3.1 with some
  modification.
 
  You need Perl for Win32.  Unless you will build on Cygwin, you will need
  ActiveState Perl, available from http://www.activestate.com/ActivePerl.
+ For Cygwin users, there's more info in the Cygwin section.
 
  and one of the following C compilers:
 
   * Visual C++
   * Borland C
-  * GNU C (Cygwin or MinGW)
-
- If you are compiling from a tarball or a CVS snapshot then the Win32 files
- may well be not up to date. This may mean that some "tweaking" is required to
- get it all to work. See the trouble shooting section later on for if (when?)
- it goes wrong.
-
- Visual C++
- ----------
+  * GNU C (Mingw32 or Cygwin)
 
  If you want to compile in the assembly language routines with Visual C++ then
  you will need an assembler. This is worth doing because it will result in
@@ -33,19 +24,26 @@
   * Microsoft MASM (aka "ml")
   * Free Netwide Assembler NASM.
 
- MASM is distributed with most versions of VC++. For the versions where it is
- not included in VC++, it is also distributed with some Microsoft DDKs, for
- example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
- either of these DDKs then you can just download the binaries for the Windows
- 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
- ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
- downloaded from the Microsoft developers site www.msdn.com.
+ MASM was at one point distributed with VC++. It is now distributed with some
+ Microsoft DDKs, for example the Windows NT 4.0 DDK and the Windows 98 DDK. If
+ you do not have either of these DDKs then you can just download the binaries
+ for the Windows 98 DDK and extract and rename the two files XXXXXml.exe and
+ XXXXXml.err, to ml.exe and ml.err and install somewhere on your PATH. Both
+ DDKs can be downloaded from the Microsoft developers site www.msdn.com.
 
  NASM is freely available. Version 0.98 was used during testing: other versions
  may also work. It is available from many places, see for example:
  http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
  The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
 
+ If you are compiling from a tarball or a CVS snapshot then the Win32 files
+ may well be not up to date. This may mean that some "tweaking" is required to
+ get it all to work. See the trouble shooting section later on for if (when?)
+ it goes wrong.
+
+ Visual C++
+ ----------
+
  Firstly you should run Configure:
 
  > perl Configure VC-WIN32
@@ -84,8 +82,7 @@
  There are various changes you can make to the Win32 compile environment. By
  default the library is not compiled with debugging symbols. If you add 'debug'
  to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
- compiled in. Note that mk1mf.pl expects the platform to be the last argument
- on the command line, so 'debug' must appear before that, as all other options.
+ compiled in.
 
  The default Win32 environment is to leave out any Windows NT specific
  features.
@@ -97,18 +94,6 @@
  You can also build a static version of the library using the Makefile
  ms\nt.mak
 
- Borland C++ builder 5
- ---------------------
-
- * Configure for building with Borland Builder:
-   > perl Configure BC-32
-
- * Create the appropriate makefile
-   > ms\do_nasm
-
- * Build
-   > make -f ms\bcb.mak
-
  Borland C++ builder 3 and 4
  ---------------------------
 
@@ -119,72 +104,18 @@
  * Run make:
    > make -f bcb.mak
 
- GNU C (Cygwin)
- --------------
+ GNU C (Mingw32)
+ ---------------
 
- Cygwin provides a bash shell and GNU tools environment running
- on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
- Consequently, a make of OpenSSL with Cygwin is closer to a GNU
- bash environment such as Linux than to other the other Win32
- makes.
-
- Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
- It is also possible to create Win32 binaries that only use the
- Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
- MinGW. MinGW can be used in the Cygwin development environment
- or in a standalone setup as described in the following section.
-
- To build OpenSSL using Cygwin:
-
- * Install Cygwin (see http://cygwin.com/)
-
- * Install Perl and ensure it is in the path. Both Cygwin perl
-   (5.6.1-2 or newer) and ActivePerl work.
-
- * Run the Cygwin bash shell
-
- * $ tar zxvf openssl-x.x.x.tar.gz
-   $ cd openssl-x.x.x
-
-   To build the Cygwin version of OpenSSL:
-
-   $ ./config
-   [...]
-   $ make
-   [...]
-   $ make test
-   $ make install
-
-   This will create a default install in /usr/local/ssl.
-
-   To build the MinGW version (native Windows) in Cygwin:
-
-   $ ./Configure mingw
-   [...]
-   $ make
-   [...]
-   $ make test
-   $ make install
-
- Cygwin Notes:
-
- "make test" and normal file operations may fail in directories
- mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
- stripping of carriage returns. To avoid this ensure that a binary
- mount is used, e.g. mount -b c:\somewhere /home.
-
- "bc" is not provided in older Cygwin distribution.  This causes a
- non-fatal error in "make test" but is otherwise harmless.  If
- desired and needed, GNU bc can be built with Cygwin without change.
-
- GNU C (MinGW)
- -------------
+ To build OpenSSL, you need the Mingw32 package and GNU make.
 
  * Compiler installation:
 
-   MinGW is available from http://www.mingw.org. Run the installer and
-   set the MinGW bin directory to the PATH in "System Properties" or
-   autoexec.bat.
+   Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/
+   gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. Extract it
+   to a directory such as C:\gcc-2.95.2 and add c:\gcc-2.95.2\bin to
+   the PATH environment variable in "System Properties"; or edit and
+   run C:\gcc-2.95.2\mingw32.bat to set the PATH.
 
  * Compile OpenSSL:
 
@@ -206,6 +137,53 @@
    > cd out
    > ..\ms\test
 
+ GNU C (Cygwin)
+ --------------
+
+ Cygwin provides a bash shell and GNU tools environment running on
+ NT 4.0, Windows 9x and Windows 2000. Consequently, a make of OpenSSL
+ with Cygwin is closer to a GNU bash environment such as Linux rather
+ than other W32 makes that are based on a single makefile approach.
+ Cygwin implements Posix/Unix calls through cygwin1.dll, and is
+ contrasted to Mingw32 which links dynamically to msvcrt.dll or
+ crtdll.dll.
+
+ To build OpenSSL using Cygwin:
+
+ * Install Cygwin (see http://sourceware.cygnus.com/cygwin)
+
+ * Install Perl and ensure it is in the path (recent Cygwin perl 
+   (version 5.6.1-2 of the latter has been reported to work) or
+   ActivePerl)
+
+ * Run the Cygwin bash shell
+
+ * $ tar zxvf openssl-x.x.x.tar.gz
+   $ cd openssl-x.x.x
+   $ ./config
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
+
+ This will create a default install in /usr/local/ssl.
+
+ Cygwin Notes:
+
+ "make test" and normal file operations may fail in directories
+ mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
+ stripping of carriage returns. To avoid this ensure that a binary
+ mount is used, e.g. mount -b c:\somewhere /home.
+
+ As of version 1.1.1 Cygwin is relatively unstable in its handling
+ of cr/lf issues. These make procedures succeeded with versions 1.1 and
+ the snapshot 20000524 (Slow!).
+
+ "bc" is not provided in the Cygwin distribution.  This causes a
+ non-fatal error in "make test" but is otherwise harmless.  If
+ desired, GNU bc can be built with Cygwin without change.
+
 
  Installation
  ------------
@@ -225,7 +203,7 @@
 	$ md c:\openssl\lib
 	$ md c:\openssl\include
 	$ md c:\openssl\include\openssl
-	$ copy /b inc32\openssl\*       c:\openssl\include\openssl
+	$ copy /b inc32\*               c:\openssl\include\openssl
 	$ copy /b out32dll\ssleay32.lib c:\openssl\lib
 	$ copy /b out32dll\libeay32.lib c:\openssl\lib
 	$ copy /b out32dll\ssleay32.dll c:\openssl\bin

INSTALL.WCE

@@ -1,71 +0,0 @@
- 
- INSTALLATION FOR THE WINDOWS CE PLATFORM
- ----------------------------------------
-
- Building OpenSSL for Windows CE requires the following external tools:
-
-  * Microsoft eMbedded Visual C++ 3.0
-  * wcecompat compatibility library (www.essemer.com.au)
-  * Optionally ceutils for running automated tests (www.essemer.com.au)
-
- You also need Perl for Win32.  You will need ActiveState Perl, available
- from http://www.activestate.com/ActivePerl.
-
- Windows CE support in OpenSSL relies on wcecompat.  All Windows CE specific
- issues should be directed to www.essemer.com.au.
-
- The C Runtime Library implementation for Windows CE that is included with
- Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places
- incorrect.  wcecompat plugs the holes and tries to bring the Windows CE
- CRT to a level that is more compatible with ANSI C.  wcecompat goes further
- and provides low-level IO and stream IO support for stdin/stdout/stderr
- (which Windows CE does not provide).  This IO functionality is not needed
- by the OpenSSL library itself but is used for the tests and openssl.exe.
- More information is available at www.essemer.com.au.
-
- Building
- --------
-
- Setup the eMbedded Visual C++ environment.  There are batch files for doing
- this installed with eVC++.  For an ARM processor, for example, execute:
-
- > "C:\Program Files\Microsoft eMbedded Tools\EVC\WCE300\BIN\WCEARM.BAT"
-
- Next indicate where wcecompat is located:
-
- > set WCECOMPAT=C:\wcecompat
-
- Next you should run Configure:
-
- > perl Configure VC-CE
-
- Next you need to build the Makefiles:
-
- > ms\do_ms
-
- If you get errors about things not having numbers assigned then check the
- troubleshooting section in INSTALL.W32: you probably won't be able to compile
- it as it stands.
-
- Then from the VC++ environment at a prompt do:
-
- - to build static libraries:
-
-   > nmake -f ms\ce.mak
-
- - or to build DLLs:
-
-   > nmake -f ms\cedll.mak
-
- If all is well it should compile and you will have some static libraries and
- executables in out32, or some DLLs and executables in out32dll.  If you want
- to try the tests then make sure the ceutils are in the path and do:
- 
- > cd out32
- > ..\ms\testce
-
- This will copy each of the test programs to the Windows CE device and execute
- them, displaying the output of the tests on this computer.  The output should
- look similar to the output produced by running the tests for a regular Windows
- build.
-

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

MacOS/GetHTTPS.src/CPStringUtils.cpp

@@ -2750,4 +2750,4 @@ void SkipWhiteSpace(char **ioSrcCharPtr,const Boolean inStopAtEOL)
 			}
 		}
 	}
-}
+}

MacOS/GetHTTPS.src/ErrorHandling.cpp

@@ -167,4 +167,4 @@ void ThrowErrorMessageException(void)
 	ThrowDescriptiveException(gErrorMessage);
 }
 
-#endif
+#endif

MacOS/GetHTTPS.src/MacSocket.cpp

@@ -1287,7 +1287,7 @@ EXITPOINT:
 
 //	Send some bytes
 
-int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength)
+int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength)
 {
 OSErr			errCode = noErr;
 int				bytesSent = 0;
@@ -1604,4 +1604,4 @@ EPInfo* epi = (EPInfo*) context;
 		}
 	}
 }
-*/
+*/

MacOS/GetHTTPS.src/MacSocket.h

@@ -62,7 +62,7 @@ int MacSocket_recv(const int inSocketNum,void *outBuff,int outBuffLength,const B
 
 //	Call this to send data on a socket
 
-int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength);
+int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength);
 
 
 //	If zero bytes were read in a call to MacSocket_recv(), it may be that the remote end has done a half-close

Makefile.org

@@ -15,11 +15,6 @@ OPTIONS=
 CONFIGURE_ARGS=
 SHLIB_TARGET=
 
-# HERE indicates where this Makefile lives.  This can be used to indicate
-# where sub-Makefiles are expected to be.  Currently has very limited usage,
-# and should probably not be bothered with at all.
-HERE=.
-
 # INSTALL_PREFIX is for package builders so that they can configure
 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
 # Normally it is left empty.
@@ -64,22 +59,13 @@ DEPFLAG=
 PEX_LIBS= 
 EX_LIBS= 
 EXE_EXT= 
-ARFLAGS=
-AR=ar $(ARFLAGS) r
+AR=ar r
 RANLIB= ranlib
 PERL= perl
 TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend
 
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS=$(CC) -c
-ASFLAG=$(CFLAG)
-
 # Set BN_ASM to bn_asm.o if you want to use the C version
 BN_ASM= bn_asm.o
 #BN_ASM= bn_asm.o
@@ -169,31 +155,31 @@ RMD160_ASM_OBJ= asm/rm86-out.o
 KRB5_INCLUDES=
 LIBKRB5=
 
-DIRS=   crypto ssl engines apps test tools
+# When we're prepared to use shared libraries in the programs we link here
+# we might set SHLIB_MARK to '$(SHARED_LIBS)'.
+SHLIB_MARK=
+
+DIRS=   crypto ssl $(SHLIB_MARK) apps test tools
 SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
 SDIRS=  \
-	objects \
 	md2 md4 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
-	bn ec rsa dsa ecdsa dh ecdh dso engine aes \
-	buffer bio stack lhash rand err \
-	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-	store
+	bn ec rsa dsa dh dso engine aes \
+	buffer bio stack lhash rand err objects \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5
 
 # tests to perform.  "alltests" is a special word indicating that all tests
 # should be performed.
 TESTS = alltests
 
 MAKEFILE= Makefile.ssl
-NEWMAKE=  make
-MAKE=     $(NEWMAKE) -f Makefile.ssl
+MAKE=     make -f Makefile.ssl
 
 MANDIR=$(OPENSSLDIR)/man
 MAN1=1
 MAN3=3
-MANSUFFIX=
 SHELL=/bin/sh
 
 TOP=    .
@@ -215,33 +201,21 @@ WTARFILE=       $(NAME)-win.tar
 EXHEADER=       e_os2.h
 HEADER=         e_os.h
 
-all: Makefile.ssl build_all openssl.pc
+# When we're prepared to use shared libraries in the programs we link here
+# we might remove 'clean-shared' from the targets to perform at this stage
 
-BUILD_CMD=if echo " $(DIRS) " | grep " $$i " >/dev/null 2>/dev/null; then \
+all: Makefile.ssl sub_all
+
+sub_all:
+	@for i in $(DIRS); \
+	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAG='${ASFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
 	else \
 		$(MAKE) $$i; \
-	fi; fi
-
-sub_all: build_all
-build_all: build_libs build_apps build_tests build_tools
-
-build_libs: build_crypto build_ssl build_engines
-
-build_crypto:
-	@i=crypto; $(BUILD_CMD)
-build_ssl:
-	@i=ssl; $(BUILD_CMD)
-build_engines:
-	@i=engines; $(BUILD_CMD)
-build_apps:
-	@i=apps; $(BUILD_CMD)
-build_tests:
-	@i=test; $(BUILD_CMD)
-build_tools:
-	@i=tools; $(BUILD_CMD)
+	fi; \
+	done;
 
 libcrypto$(SHLIB_EXT): libcrypto.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
@@ -258,7 +232,7 @@ libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
 	fi
 
 clean-shared:
-	@set -e; for i in $(SHLIBDIRS); do \
+	@for i in $(SHLIBDIRS); do \
 		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
 			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
 			for j in $${tmp:-x}; do \
@@ -272,44 +246,271 @@ clean-shared:
 	done
 
 link-shared:
-	@ set -e; for i in ${SHLIBDIRS}; do \
-		$(NEWMAKE) -f $(HERE)/Makefile.shared \
-			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
-			symlink.$(SHLIB_TARGET); \
+	@if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
+		tmp="$(SHARED_LIBS_LINK_EXTS)"; \
+		for i in $(SHLIBDIRS); do \
+			prev=lib$$i$(SHLIB_EXT); \
+			for j in $${tmp:-x}; do \
+				( set -x; ln -f -s $$prev lib$$i$$j ); \
+				prev=lib$$i$$j; \
+			done; \
+		done; \
+	fi
+
+build-shared: clean-shared do_$(SHLIB_TARGET) link-shared
+
+do_bsd-gcc-shared: do_gnu-shared
+do_linux-shared: do_gnu-shared
+do_gnu-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( set -x; ${CC} ${SHARED_LDFLAGS} \
+		-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-Wl,-Bsymbolic \
+		-Wl,--whole-archive lib$$i.a \
+		-Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
+	libs="$$libs -l$$i"; \
+	done
+
+DETECT_GNU_LD=${CC} -v 2>&1 | grep '^gcc' >/dev/null 2>&1 && \
+	collect2=`gcc -print-prog-name=collect2 2>&1` && \
+	[ -n "$$collect2" ] && \
+	my_ld=`$$collect2 --help 2>&1 | grep Usage: | sed 's/^Usage: *\([^ ][^ ]*\).*/\1/'` && \
+	[ -n "$$my_ld" ] && \
+	$$my_ld -v 2>&1 | grep 'GNU ld' >/dev/null 2>&1
+
+# For Darwin AKA Mac OS/X (dyld)
+do_darwin-shared: 
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( set -x ; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
+		lib$$i.a $$libs -all_load -current_version ${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-compatibility_version ${SHLIB_MAJOR}.`echo ${SHLIB_MINOR} | cut -d. -f1` \
+		-install_name ${INSTALLTOP}/lib/lib$$i${SHLIB_EXT} ) || exit 1; \
+	libs="$$libs -l`basename $$i${SHLIB_EXT} .dylib`"; \
+	echo "" ; \
+	done
+
+do_cygwin-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( set -x; ${CC}  -shared -o cyg$$i.dll \
+		-Wl,-Bsymbolic \
+		-Wl,--whole-archive lib$$i.a \
+		-Wl,--out-implib,lib$$i.dll.a \
+		-Wl,--no-whole-archive $$libs ) || exit 1; \
+	libs="$$libs -l$$i"; \
+	done
+
+# This assumes that GNU utilities are *not* used
+do_alpha-osf1-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( set -x; ${CC} ${SHARED_LDFLAGS} \
+			-shared -o lib$$i.so \
+			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
+			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
 		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# This assumes that GNU utilities are *not* used
+# The difference between alpha-osf1-shared and tru64-shared is the `-msym'
+# option passed to the linker.
+do_tru64-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( set -x; ${CC} ${SHARED_LDFLAGS} \
+			-shared -msym -o lib$$i.so \
+			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
+			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# This assumes that GNU utilities are *not* used
+# The difference between tru64-shared and tru64-shared-rpath is the
+# -rpath ${INSTALLTOP}/lib passed to the linker.
+do_tru64-shared-rpath:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( set -x; ${CC} ${SHARED_LDFLAGS} \
+			-shared -msym -o lib$$i.so \
+			-rpath  ${INSTALLTOP}/lib \
+			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
+			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+
+# This assumes that GNU utilities are *not* used
+do_solaris-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
+		  set -x; ${CC} ${SHARED_LDFLAGS} \
+			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-z allextract lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# OpenServer 5 native compilers used
+do_svr3-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
+		  find . -name "*.o" -print > allobjs ; \
+		  OBJS= ; export OBJS ; \
+		  for obj in `ar t lib$$i.a` ; do \
+		    OBJS="$${OBJS} `grep $$obj allobjs`" ; \
+		  done ; \
+		  set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# UnixWare 7 and OpenUNIX 8 native compilers used
+do_svr5-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
+		  find . -name "*.o" -print > allobjs ; \
+		  OBJS= ; export OBJS ; \
+		  for obj in `ar t lib$$i.a` ; do \
+		    OBJS="$${OBJS} `grep $$obj allobjs`" ; \
+		  done ; \
+		  set -x; ${CC} ${SHARED_LDFLAGS} \
+			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# This assumes that GNU utilities are *not* used
+do_irix-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( set -x; ${CC} ${SHARED_LDFLAGS} \
+			-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-all lib$$i.a $$libs ${EX_LIBS} -lc) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# This assumes that GNU utilities are *not* used
+# HP-UX includes the full pathname of libs we depend on, so we would get
+# ./libcrypto (with ./ as path information) compiled into libssl, hence
+# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto
+# anyway.
+# The object modules are loaded from lib$i.a using the undocumented -Fl
+# option.
+#
+# WARNING: Until DSO is fixed to support a search path, we support SHLIB_PATH
+#          by temporarily specifying "+s"!
+#
+do_hpux-shared:
+	for i in ${SHLIBDIRS}; do \
+	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
+ 		+vnocompatwarnings \
+		-b -z +s \
+		-o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		+h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-Fl lib$$i.a -ldld -lc ) || exit 1; \
 	done
 
-build-shared: do_$(SHLIB_TARGET) link-shared
-
-do_$(SHLIB_TARGET):
-	@ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
-			libs="$(LIBKRB5) $$libs"; \
-		fi; \
-		$(NEWMAKE) -f Makefile.shared \
-			CC="$(CC)" LDFLAGS="$(LDFLAGS)" \
-			SHARED_LDFLAGS="$(SHARED_LDFLAGS)" \
-			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
-			LIBDEPS="$$libs $(EX_LIBS)" \
-			LIBRPATH="$(INSTALLTOP)/lib" \
-			link_a.$(SHLIB_TARGET); \
-		libs="-l$$i $$libs"; \
+# This assumes that GNU utilities are *not* used
+# HP-UX includes the full pathname of libs we depend on, so we would get
+# ./libcrypto (with ./ as path information) compiled into libssl, hence
+# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto
+# anyway.
+#
+# HP-UX in 64bit mode has "+s" enabled by default; it will search for
+# shared libraries along LD_LIBRARY_PATH _and_ SHLIB_PATH.
+#
+do_hpux64-shared:
+	for i in ${SHLIBDIRS}; do \
+	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
+ 		-b -z \
+		-o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		+h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		+forceload lib$$i.a -ldl -lc ) || exit 1; \
 	done
 
-openssl.pc: Makefile.ssl
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL'; \
-	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
+# The following method is said to work on all platforms.  Tests will
+# determine if that's how it's gong to be used.
+# This assumes that for all but GNU systems, GNU utilities are *not* used.
+# ALLSYMSFLAGS would be:
+#  GNU systems: --whole-archive
+#  Tru64 Unix:  -all
+#  Solaris:     -z allextract
+#  Irix:        -all
+#  HP/UX-32bit: -Fl
+#  HP/UX-64bit: +forceload
+#  AIX:		-bnogc
+# SHAREDFLAGS would be:
+#  GNU systems: -shared -Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+#  Tru64 Unix:  -shared \
+#		-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}"
+#  Solaris:     -G -h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+#  Irix:        -shared -Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+#  HP/UX-32bit: +vnocompatwarnings -b -z +s \
+#		+h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}
+#  HP/UX-64bit: -b -z +h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}
+#  AIX:		-G -bE:lib$$i.exp -bM:SRE
+# SHAREDCMD would be:
+#  GNU systems: $(CC)
+#  Tru64 Unix:  $(CC)
+#  Solaris:     $(CC)
+#  Irix:        $(CC)
+#  HP/UX-32bit: /usr/ccs/bin/ld
+#  HP/UX-64bit: /usr/ccs/bin/ld
+#  AIX:		$(CC)
+ALLSYMSFLAG=-bnogc
+SHAREDFLAGS=${SHARED_LDFLAGS} -G -bE:lib$$i.exp -bM:SRE
+SHAREDCMD=$(CC)
+do_aix-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( set -x; \
+	  ld -r -o $$i.o $(ALLSYMSFLAG) lib$$i.a && \
+	  ( nm -Pg lib$$i.o | grep ' [BD] ' | cut -f1 -d' ' > lib$$i.exp; \
+	    $(SHAREDCMD) $(SHAREDFLAG) -o lib$$i.so lib$$i.o \
+		$$libs ${EX_LIBS} ) ) \
+	|| exit 1; \
+	libs="$$libs -l$$i"; \
+	done
+
+do_reliantunix-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	tmpdir=/tmp/openssl.$$$$ ; rm -rf $$tmpdir ; \
+	( set -x; \
+	  ( Opwd=`pwd` ; mkdir $$tmpdir || exit 1; \
+	    cd $$tmpdir || exit 1 ; ar x $$Opwd/lib$$i.a ; \
+	    ${CC} -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} *.o \
+	  ) || exit 1; \
+	  cp $$tmpdir/lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} . ; \
+	) || exit 1; \
+	rm -rf $$tmpdir ; \
+	libs="$$libs -l$$i"; \
+	done
 
 Makefile.ssl: Makefile.org
 	@echo "Makefile.ssl is older than Makefile.org."
@@ -317,11 +518,11 @@ Makefile.ssl: Makefile.org
 	@false
 
 libclean:
-	rm -f *.map *.so *.so.* engines/*.so *.a */lib */*/lib
+	rm -f *.a */lib */*/lib
 
-clean:	libclean
-	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
-	@set -e; for i in $(DIRS) ;\
+clean:
+	rm -f shlib/*.o *.o core a.out fluff *.map rehash.time testlog make.log cctest cctest.c
+	@for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making clean in $$i..." && \
@@ -329,10 +530,9 @@ clean:	libclean
 		rm -f $(LIBS); \
 	fi; \
 	done;
-	rm -f openssl.pc
-	rm -f speed.* .pure
+	rm -f *.a *.o speed.* *.map *.so .pure core
 	rm -f $(TARFILE)
-	@set -e; for i in $(ONEDIRS) ;\
+	@for i in $(ONEDIRS) ;\
 	do \
 	rm -fr $$i/*; \
 	done
@@ -343,7 +543,7 @@ makefile.one: files
 
 files:
 	$(PERL) $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
-	@set -e; for i in $(DIRS) ;\
+	@for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making 'files' in $$i..." && \
@@ -355,20 +555,16 @@ links:
 	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
-	@set -e; for i in $(DIRS); do \
+	@for i in $(DIRS); do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making links in $$i..." && \
 		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' links ) || exit 1; \
 	fi; \
 	done;
 
-gentests:
-	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
-
 dclean:
 	rm -f *.bak
-	@set -e; for i in $(DIRS) ;\
+	@for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making dclean in $$i..." && \
@@ -380,12 +576,8 @@ rehash: rehash.time
 rehash.time: certs
 	@(OPENSSL="`pwd`/apps/openssl"; OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
-		LD_LIBRARY_PATH="`pwd`:$$LD_LIBRARY_PATH"; \
-		DYLD_LIBRARY_PATH="`pwd`:$$DYLD_LIBRARY_PATH"; \
-		SHLIB_PATH="`pwd`:$$SHLIB_PATH"; \
-		LIBPATH="`pwd`:$$LIBPATH"; \
-		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
-		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
+		LD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
+		export LD_LIBRARY_PATH SHLIB_PATH LIBPATH; \
 		$(PERL) tools/c_rehash certs)
 	touch rehash.time
 
@@ -393,29 +585,25 @@ test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
-	@LD_LIBRARY_PATH="`pwd`:$$LD_LIBRARY_PATH"; \
-	DYLD_LIBRARY_PATH="`pwd`:$$DYLD_LIBRARY_PATH"; \
-	SHLIB_PATH="`pwd`:$$SHLIB_PATH"; \
-	LIBPATH="`pwd`:$$LIBPATH"; \
-	if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
-	export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
-	apps/openssl version -a
+	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' OPENSSL_DEBUG_MEMORY=on tests );
+	@LD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
+		export LD_LIBRARY_PATH SHLIB_PATH LIBPATH; \
+		apps/openssl version -a
 
 report:
 	@$(PERL) util/selftest.pl
 
 depend:
-	@set -e; for i in $(DIRS) ;\
+	@for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making dependencies $$i..." && \
-		$(MAKE) SDIRS='${SDIRS}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ) || exit 1; \
+		$(MAKE) SDIRS='${SDIRS}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' depend ) || exit 1; \
 	fi; \
 	done;
 
 lint:
-	@set -e; for i in $(DIRS) ;\
+	@for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making lint $$i..." && \
@@ -424,7 +612,7 @@ lint:
 	done;
 
 tags:
-	@set -e; for i in $(DIRS) ;\
+	@for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making tags $$i..." && \
@@ -434,7 +622,7 @@ tags:
 
 errors:
 	$(PERL) util/mkerr.pl -recurse -write
-	(cd engines; $(MAKE) PERL=$(PERL) errors)
+	(cd crypto/engine; $(MAKE) PERL=$(PERL) errors)
 
 stacks:
 	$(PERL) util/mkstack.pl -write
@@ -456,22 +644,13 @@ TABLE: Configure
 
 update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h TABLE
 
-# Build distribution tar-file. As the list of files returned by "find" is
-# pretty long, on several platforms a "too many arguments" error or similar
-# would occur. Therefore the list of files is temporarily stored into a file
-# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
-# tar does not support the --files-from option.
 tar:
-	find . -type d -print | xargs chmod 755
-	find . -type f -print | xargs chmod a+r
-	find . -type f -perm -0100 -print | xargs chmod a+x
-	find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
-	$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
+	@$(TAR) $(TARFLAGS) -cvf - \
+		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort` |\
 	tardy --user_number=0  --user_name=openssl \
 	      --group_number=0 --group_name=openssl \
 	      --prefix=openssl-$(VERSION) - |\
 	gzip --best >../$(TARFILE).gz; \
-	rm -f ../$(TARFILE).list; \
 	ls -l ../$(TARFILE).gz
 
 tar-snap:
@@ -486,7 +665,7 @@ dist:
 	$(PERL) Configure dist
 	@$(MAKE) dist_pem_h
 	@$(MAKE) SDIRS='${SDIRS}' clean
-	@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
+	@$(MAKE) tar
 
 dist_pem_h:
 	(cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean)
@@ -494,68 +673,54 @@ dist_pem_h:
 install: all install_docs
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/engines \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/private \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/lib
-	@set -e; for i in $(EXHEADER) ;\
+	@for i in $(EXHEADER) ;\
 	do \
 	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 	done;
-	@set -e; for i in $(DIRS) ;\
+	@for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i; echo "installing $$i..."; \
-		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' install ); \
+		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' install ); \
 	fi; \
 	done
-	@set -e; for i in $(LIBS) ;\
+	@for i in $(LIBS) ;\
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
-			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
 		fi; \
 	done;
-	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
+	@if [ -n "$(SHARED_LIBS)" ]; then \
 		tmp="$(SHARED_LIBS)"; \
 		for i in $${tmp:-x}; \
 		do \
 			if [ -f "$$i" -o -f "$$i.a" ]; then \
 			(       echo installing $$i; \
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
 					c=`echo $$i | sed 's/^lib/cyg/'`; \
-					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
 				fi ); \
 			fi; \
 		done; \
 		(	here="`pwd`"; \
 			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-			$(NEWMAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
-		if [ "$(INSTALLTOP)" != "/usr" ]; then \
-			echo 'OpenSSL shared libraries have been installed in:'; \
-			echo '  $(INSTALLTOP)'; \
-			echo ''; \
-			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
-		fi; \
+			make -f $$here/Makefile link-shared ); \
 	fi
-	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
 
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -563,45 +728,25 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man3 \
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
-	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
-	here="`pwd`"; \
-	filecase=; \
-	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" ]; then \
-		filecase=-i; \
-	fi; \
-	set -e; for i in doc/apps/*.pod; do \
+	@for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
-		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
-		(cd `$(PERL) util/dirname.pl $$i`; \
-		sh -c "$$pod2man \
+		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		(cd `dirname $$i`; \
+		sh -c "`cd ../../util; ./pod2mantest ignore` \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(PERL) util/extract-names.pl < $$i | \
-			grep -v $$filecase "^$$fn\$$" | \
-			grep -v "[	]" | \
-			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
-			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
-			 done); \
-	done; \
-	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+	done
+	@for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
-		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
-		(cd `$(PERL) util/dirname.pl $$i`; \
-		sh -c "$$pod2man \
+		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		(cd `dirname $$i`; \
+		sh -c "`cd ../../util; ./pod2mantest ignore` \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(PERL) util/extract-names.pl < $$i | \
-			grep -v $$filecase "^$$fn\$$" | \
-			grep -v "[	]" | \
-			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
-			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
-			 done); \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
 	done
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.

Makefile.shared

@@ -1,786 +0,0 @@
-#
-# Helper makefile to link shared libraries in a portable way.
-# This is much simpler than libtool, and hopefully not too error-prone.
-#
-# The following variables need to be set on the command line to build
-# properly
-
-# CC contains the current compiler.  This one MUST be defined
-CC=cc
-# LDFLAGS contains flags to be used when temporary object files (when building
-# shared libraries) are created, or when an application is linked.
-# SHARED_LDFLAGS contains flags to be used when the shared library is created.
-LDFLAGS=
-SHARED_LDFLAGS=
-
-# LIBNAME contains just the name of the library, without prefix ("lib"
-# on Unix, "cyg" for certain forms under Cygwin...) or suffix (.a, .so,
-# .dll, ...).  This one MUST have a value when using this makefile to
-# build shared libraries.
-# For example, to build libfoo.so, you need to do the following:
-#LIBNAME=foo
-LIBNAME=
-
-# APPNAME contains just the name of the application, without suffix (""
-# on Unix, ".exe" on Windows, ...).  This one MUST have a value when using
-# this makefile to build applications.
-# For example, to build foo, you need to do the following:
-#APPNAME=foo
-APPNAME=
-
-# OBJECTS contains all the object files to link together into the application.
-# This must contain at least one object file.
-#OBJECTS=foo.o
-OBJECTS=
-
-# LIBEXTRAS contains extra modules to link together with the library.
-# For example, if a second library, say libbar.a needs to be linked into
-# libfoo.so, you need to do the following:
-#LIBEXTRAS=libbar.a
-# Note that this MUST be used when using the link_o targets, to hold the
-# names of all object files that go into the target library.
-LIBEXTRAS=
-
-# LIBVERSION contains the current version of the library.
-# For example, to build libfoo.so.1.2, you need to do the following:
-#LIBVERSION=1.2
-LIBVERSION=
-
-# LIBCOMPATVERSIONS contains the compatibility versions (a list) of
-# the library.  They MUST be in decreasing order.
-# For example, if libfoo.so.1.2.1 is backward compatible with libfoo.so.1.2
-# and libfoo.so.1, you need to do the following:
-#LIBCOMPATVERSIONS=1.2 1
-# Note that on systems that use sonames, the last number will appear as
-# part of it.
-# It's also possible, for systems that support it (Tru64, for example),
-# to add extra compatibility info with more precision, by adding a second
-# list of versions, separated from the first with a semicolon, like this:
-#LIBCOMPATVERSIONS=1.2 1;1.2.0 1.1.2 1.1.1 1.1.0 1.0.0
-LIBCOMPATVERSIONS=
-
-# LIBDEPS contains all the flags necessary to cover all necessary
-# dependencies to other libraries.
-LIBDEPS=
-
-#------------------------------------------------------------------------------
-# The rest is private to this makefile.
-
-#DEBUG=:
-DEBUG=set -x
-
-top:
-	echo "Trying to use this makefile interactively?  Don't."
-
-CALC_VERSIONS=	\
-	SHLIB_COMPAT=; SHLIB_SOVER=; \
-	if [ -n "$(LIBVERSION)$(LIBCOMPATVERSIONS)" ]; then \
-		prev=""; \
-		for v in `echo "$(LIBVERSION) $(LIBCOMPATVERSIONS)" | cut -d';' -f1`; do \
-			SHLIB_SOVER_NODOT=$$v; \
-			SHLIB_SOVER=.$$v; \
-			if [ -n "$$prev" ]; then \
-				SHLIB_COMPAT="$$SHLIB_COMPAT .$$prev"; \
-			fi; \
-			prev=$$v; \
-		done; \
-	fi
-
-LINK_APP=	\
-  ( $(DEBUG);   \
-    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
-    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
-    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-    $$LDCMD $(LDFLAGS) $$LDFLAGS -o $$APPNAME $(OBJECTS) $$LIBDEPS )
-
-LINK_SO=	\
-  ( $(DEBUG);   \
-    nm -Pg $$SHOBJECTS | grep ' [BDT] ' | cut -f1 -d' ' > lib$(LIBNAME).exp; \
-    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
-    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
-    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-    $$SHAREDCMD $(SHARED_LDFLAGS) $$SHAREDFLAGS -o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
-	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS ) && \
-  $(SYMLINK_SO); ( $(DEBUG); rm -f lib$(LIBNAME).exp )
-SYMLINK_SO=	\
-	if [ -n "$$INHIBIT_SYMLINKS" ]; then :; else \
-		prev=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
-		if [ -n "$$SHLIB_COMPAT" ]; then \
-			for x in $$SHLIB_COMPAT; do \
-				( $(DEBUG); rm -f $$SHLIB$$x$$SHLIB_SUFFIX; \
-				  ln -s $$prev $$SHLIB$$x$$SHLIB_SUFFIX ); \
-				prev=$$SHLIB$$x$$SHLIB_SUFFIX; \
-			done; \
-		fi; \
-		if [ -n "$$SHLIB_SOVER" ]; then \
-			( $(DEBUG); rm -f $$SHLIB$$SHLIB_SUFFIX; \
-			  ln -s $$prev $$SHLIB$$SHLIB_SUFFIX ); \
-		fi; \
-	fi
-
-LINK_SO_A=	SHOBJECTS="lib$(LIBNAME).a $(LIBEXTRAS)"; $(LINK_SO)
-LINK_SO_O=	SHOBJECTS="$(LIBEXTRAS)"; $(LINK_SO)
-LINK_SO_A_VIA_O=	\
-  SHOBJECTS=lib$(LIBNAME).o; \
-  ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
-  ( $(DEBUG); \
-    ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
-  $(LINK_SO) && rm -f $(LIBNAME).o
-LINK_SO_A_UNPACKED=	\
-  UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
-  (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && \
-  ([ -z "$(LIBEXTRAS)" ] || cp $(LIBEXTRAS) $$UNPACKDIR) && \
-  SHOBJECTS=$$UNPACKDIR/*.o; \
-  $(LINK_SO) && rm -rf $$UNPACKDIR
-
-DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
-
-DO_GNU_SO=$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-rpath,$(LIBRPATH)"; \
-	SHAREDCMD='$(CC)'
-DO_GNU_APP=LDCMD=$(CC);\
-	LDFLAGS="-Wl,-rpath,$(LIBRPATH)"; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	APPNAME=$(APPNAME)
-
-#This is rather special.  It's a special target with which one can link
-#applications without bothering with any features that have anything to
-#do with shared libraries, for example when linking against static
-#libraries.  It's mostly here to avoid a lot of conditionals everywhere
-#else...
-link_app.:
-	LDCMD=$(CC); \
-	LDFLAGS=""; \
-	LIBDEPS="$(LIBDEPS)"; \
-	APPNAME="$(APPNAME)"; \
-	$(LINK_APP)
-
-link_o.gnu:
-	@ $(DO_GNU_SO); $(LINK_SO_O)
-link_a.gnu:
-	@ $(DO_GNU_SO); $(LINK_SO_A)
-link_app.gnu:
-	@ $(DO_GNU_APP); $(LINK_APP)
-
-# For Darwin AKA Mac OS/X (dyld)
-link_o.darwin:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS='-all_load'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="-dynamiclib"; \
-	SHAREDCMD='$(CC)'; \
-	if [ -n "$(LIBVERSION)" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
-	fi; \
-	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.darwin:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS='-all_load'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="-dynamiclib"; \
-	SHAREDCMD='$(CC)'; \
-	if [ -n "$(LIBVERSION)" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
-	fi; \
-	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
-	fi; \
-	$(LINK_SO_A)
-link_app.darwin:
-	LDCMD=$(CC);\
-	LDFLAGS=""; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	APPNAME="$(APPNAME)"; \
-	$(LINK_APP)
-
-link_o.cygwin:
-	@ $(CALC_VERSIONS); \
-	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME); \
-	SHLIB_SUFFIX=.dll; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	SHLIB_SOVER=-$(LIBVERSION); \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
-	SHAREDCMD='${CC}'; \
-	$(LINK_SO_O)
-link_a.cygwin:
-	@ $(CALC_VERSIONS); \
-	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME); \
-	SHLIB_SUFFIX=.dll; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	SHLIB_SOVER=; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
-	SHAREDCMD='${CC}'; \
-	$(LINK_SO_A)
-link_app.cygwin:
-	LDCMD=$(CC);\
-	LDFLAGS=""; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	APPNAME="$(APPNAME).exe"
-	$(LINK_APP)
-
-link_o.alpha-osf1:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="-shared"; \
-		SHAREDCMD='$(CC)'; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
-		fi; \
-	fi; \
-	$(LINK_SO_O)
-link_a.alpha-osf1:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="-shared"; \
-		SHAREDCMD='$(CC)'; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
-		fi; \
-	fi; \
-	$(LINK_SO_A)
-link_app.alpha-osf1:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS=""; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		APPNAME="$(APPNAME)"
-	fi; \
-	$(LINK_APP)
-
-# The difference between alpha-osf1-shared and tru64-shared is the `-msym'
-# option passed to the linker.
-link_o.tru64:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
-		fi; \
-	fi; \
-	$(LINK_SO_O)
-link_a.tru64:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
-		fi; \
-	fi; \
-	$(LINK_SO_A)
-link_app.tru64:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS="-rpath $(LIBRPATH)"; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		APPNAME="$(APPNAME)"; \
-	fi; \
-	$(LINK_APP)
-
-# The difference between tru64-shared and tru64-shared-rpath is the
-# -rpath ${LIBRPATH} passed to the linker.
-link_o.tru64-rpath:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
-		fi; \
-	fi; \
-	$(LINK_SO_O)
-link_a.tru64-rpath:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
-		fi; \
-	fi; \
-	$(LINK_SO_A)
-link_app.tru64-rpath:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS="-rpath $(LIBRPATH)"; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		APPNAME="$(APPNAME)"; \
-	fi; \
-	$(LINK_APP)
-
-link_o.solaris:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		MINUSZ='-z '; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
-		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
-		SHAREDFLAGS="-G -dy -z text -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -R $(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-	fi; \
-	$(LINK_SO_O)
-link_a.solaris:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		MINUSZ='-z '; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=;\
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
-		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
-		SHAREDFLAGS="-G -dy -z text -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -R $(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-	fi; \
-	$(LINK_SO_A)
-link_app.solaris:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS="-R $(LIBRPATH)"; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		APPNAME="$(APPNAME)"; \
-	fi; \
-	$(LINK_APP)
-
-# OpenServer 5 native compilers used
-link_o.svr3:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-		SHAREDCMD='$(CC)'; \
-	fi; \
-	$(LINK_SO_O)
-link_a.svr3:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-		SHAREDCMD='$(CC)'; \
-	fi; \
-	$(LINK_SO_A_UNPACKED)
-link_app.svr3:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS=""; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		APPNAME="$(APPNAME)"; \
-	fi; \
-	$(LINK_APP)
-
-# UnixWare 7 and OpenUNIX 8 native compilers used
-link_o.svr5:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHARE_FLAG='-G'; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-		SHAREDCMD='$(CC)'; \
-	fi; \
-	$(LINK_SO_O)
-link_a.svr5:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHARE_FLAG='-G'; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-		SHAREDCMD='$(CC)'; \
-	fi; \
-	$(LINK_SO_A_UNPACKED)
-link_app.svr5:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS=""; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		APPNAME="$(APPNAME)"; \
-	fi; \
-	$(LINK_APP)
-
-link_o.irix:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		MINUSWL=""; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
-		ALLSYMSFLAGS="$${MINUSWL}-all"; \
-		NOALLSYMSFLAGS="$${MINUSWL}-notall"; \
-		SHAREDFLAGS="-shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-rpath,$(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-	fi; \
-	$(LINK_SO_O)
-link_a.irix:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		MINUSWL=""; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
-		ALLSYMSFLAGS="$${MINUSWL}-all"; \
-		NOALLSYMSFLAGS="$${MINUSWL}-notall"; \
-		SHAREDFLAGS="-shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-rpath,$(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-	fi; \
-	$(LINK_SO_A)
-link_app.irix:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS="-Wl,-rpath,$(LIBRPATH)"; \
-		LIBDEPS="$(LIBDEPS) -lc"; \
-		APPNAME="$(APPNAME)"; \
-	fi; \
-	$(LINK_APP)
-
-# HP-UX includes the full pathname of libs we depend on, so we would get
-# ./libcrypto (with ./ as path information) compiled into libssl, hence
-# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto
-# anyway.
-# The object modules are loaded from lib$i.a using the undocumented -Fl
-# option.
-#
-# WARNING: Until DSO is fixed to support a search path, we support SHLIB_PATH
-#          by temporarily specifying "+s"!
-#
-link_o.hpux32:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS='-Fl'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="+vnocompatwarnings -b -z +s +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX +b $(LIBRPATH)"; \
-	SHAREDCMD='/usr/ccs/bin/ld'; \
-	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
-link_a.hpux32:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS='-Fl'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="+vnocompatwarnings -b -z +s +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX +b $(LIBRPATH)"; \
-	SHAREDCMD='/usr/ccs/bin/ld'; \
-	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
-link_app.hpux32:
-	LDCMD=$(CC);\
-	LDFLAGS="-Wl,+b,$(LIBRPATH)"; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	APPNAME="$(APPNAME)"
-	$(LINK_APP)
-
-# HP-UX includes the full pathname of libs we depend on, so we would get
-# ./libcrypto (with ./ as path information) compiled into libssl, hence
-# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto
-# anyway.
-#
-# HP-UX in 64bit mode has "+s" enabled by default; it will search for
-# shared libraries along LD_LIBRARY_PATH _and_ SHLIB_PATH.
-#
-link_o.hpux64:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS='+forceload'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="-b -z +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX +b $(LIBRPATH)"; \
-	SHAREDCMD='/usr/ccs/bin/ld'; \
-	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
-link_a.hpux64:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS='+forceload'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="-b -z +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX +b $(LIBRPATH)"; \
-	SHAREDCMD='/usr/ccs/bin/ld'; \
-	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
-link_app.hpux64:
-	LDCMD=$(CC);\
-	LDFLAGS="-Wl,+b,$(LIBRPATH)"; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	APPNAME="$(APPNAME)"
-	$(LINK_APP)
-
-link_o.aix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS='-bnogc'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='-G -bE:lib$(LIBNAME).exp -bM:SRE -blibpath:$(LIBRPATH)'; \
-	SHAREDCMD='$(CC)'; \
-	$(LINK_SO_O)
-link_a.aix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS='-bnogc'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='-G -bE:lib$(LIBNAME).exp -bM:SRE -blibpath:$(LIBRPATH)'; \
-	SHAREDCMD='$(CC)'; \
-	$(LINK_SO_A_VIA_O)
-link_app.aix:
-	LDCMD=$(CC);\
-	LDFLAGS="-blibpath:$(LIBRPATH)"; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	APPNAME="$(APPNAME)"
-	$(LINK_APP)
-
-link_o.reliantunix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS=; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='-G'; \
-	SHAREDCMD='$(CC)'; \
-	$(LINK_SO_O)
-link_a.reliantunix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	ALLSYMSFLAGS=; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='-G'; \
-	SHAREDCMD='$(CC)'; \
-	$(LINK_SO_A_UNPACKED)
-link_app.reliantunix:
-	LDCMD=$(CC);\
-	LDFLAGS=""; \
-	LIBDEPS="$(LIBDEPS) -lc"; \
-	APPNAME="$(APPNAME)"
-	$(LINK_APP)
-
-# Targets to build symbolic links when needed
-symlink.gnu symlink.solaris symlink.svr3 symlink.svr5 symlink.irix \
-symlink.aix symlink.reliantunix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	$(SYMLINK_SO)
-symlink.darwin:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	$(SYMLINK_SO)
-symlink.hpux32 symlink.hpux64:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	$(SYMLINK_SO)
-# The following lines means those specific architectures do no symlinks
-symlink.cygwin symlib.alpha-osf1 symlink.tru64 symlink.tru64-rpath:
-
-# Compatibility targets
-link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu
-link_a.bsd-gcc-shared link_a.linux-shared link_a.gnu-shared: link_a.gnu
-link_app.bsd-gcc-shared link_app.linux-shared link_app.gnu-shared: link_app.gnu
-symlink.bsd-gcc-shared symlink.linux-shared symlink.gnu-shared: symlink.gnu
-link_o.darwin-shared: link_o.darwin
-link_a.darwin-shared: link_a.darwin
-link_app.darwin-shared: link_app.darwin
-symlink.darwin-shared: symlink.darwin
-link_o.cygwin-shared: link_o.cygwin
-link_a.cygwin-shared: link_a.cygwin
-link_app.cygwin-shared: link_app.cygwin
-symlink.cygwin-shared: symlink.cygwin
-link_o.alpha-osf1-shared: link_o.alpha-osf1
-link_a.alpha-osf1-shared: link_a.alpha-osf1
-link_app.alpha-osf1-shared: link_app.alpha-osf1
-symlink.alpha-osf1-shared: symlink.alpha-osf1
-link_o.tru64-shared: link_o.tru64
-link_a.tru64-shared: link_a.tru64
-link_app.tru64-shared: link_app.tru64
-symlink.tru64-shared: symlink.tru64
-link_o.tru64-shared-rpath: link_o.tru64-rpath
-link_a.tru64-shared-rpath: link_a.tru64-rpath
-link_app.tru64-shared-rpath: link_app.tru64-rpath
-symlink.tru64-shared-rpath: symlink.tru64-rpath
-link_o.solaris-shared: link_o.solaris
-link_a.solaris-shared: link_a.solaris
-link_app.solaris-shared: link_app.solaris
-symlink.solaris-shared: symlink.solaris
-link_o.svr3-shared: link_o.svr3
-link_a.svr3-shared: link_a.svr3
-link_app.svr3-shared: link_app.svr3
-symlink.svr3-shared: symlink.svr3
-link_o.svr5-shared: link_o.svr5
-link_a.svr5-shared: link_a.svr5
-link_app.svr5-shared: link_app.svr5
-symlink.svr5-shared: symlink.svr5
-link_o.irix-shared: link_o.irix
-link_a.irix-shared: link_a.irix
-link_app.irix-shared: link_app.irix
-symlink.irix-shared: symlink.irix
-link_o.hpux-shared: link_o.hpux32
-link_a.hpux-shared: link_a.hpux32
-link_app.hpux-shared: link_app.hpux32
-symlink.hpux-shared: symlink.hpux32
-link_o.hpux64-shared: link_o.hpux64
-link_a.hpux64-shared: link_a.hpux64
-link_app.hpux64-shared: link_app.hpux64
-symlink.hpux64-shared: symlink.hpux64
-link_o.aix-shared: link_o.aix
-link_a.aix-shared: link_a.aix
-link_app.aix-shared: link_app.aix
-symlink.aix-shared: symlink.aix
-link_o.reliantunix-shared: link_o.reliantunix
-link_a.reliantunix-shared: link_a.reliantunix
-link_app.reliantunix-shared: link_app.reliantunix
-symlink.reliantunix-shared: symlink.reliantunix

NEWS

@@ -5,35 +5,6 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
-  Major changes between OpenSSL 0.9.7b and OpenSSL 0.9.7c:
-
-      o Security: fix various ASN1 parsing bugs.
-      o New -ignore_err option to OCSP utility.
-      o Various interop and bug fixes in S/MIME code.
-      o SSL/TLS protocol fix for unrequested client certificates.
-
-  Major changes between OpenSSL 0.9.7a and OpenSSL 0.9.7b:
-
-      o Security: counter the Klima-Pokorny-Rosa extension of
-        Bleichbacher's attack 
-      o Security: make RSA blinding default.
-      o Configuration: Irix fixes, AIX fixes, better mingw support.
-      o Support for new platforms: linux-ia64-ecc.
-      o Build: shared library support fixes.
-      o ASN.1: treat domainComponent correctly.
-      o Documentation: fixes and additions.
-
-  Major changes between OpenSSL 0.9.7 and OpenSSL 0.9.7a:
-
-      o Security: Important security related bugfixes.
-      o Enhanced compatibility with MIT Kerberos.
-      o Can be built without the ENGINE framework.
-      o IA32 assembler enhancements.
-      o Support for new platforms: FreeBSD/IA64 and FreeBSD/Sparc64.
-      o Configuration: the no-err option now works properly.
-      o SSL/TLS: now handles manual certificate chain building.
-      o SSL/TLS: certain session ID malfunctions corrected.
-
   Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.7:
 
       o New library section OCSP.
@@ -46,21 +17,13 @@
         a separate distribution.
       o New elliptic curve library section.
       o New AES (Rijndael) library section.
-      o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit,
-        Linux x86_64, Linux 64-bit on Sparc v9
-      o Extended support for some platforms: VxWorks
-      o Enhanced support for shared libraries.
-      o Now only builds PIC code when shared library support is requested.
-      o Support for pkg-config.
-      o Lots of new manuals.
-      o Makes symbolic links to or copies of manuals to cover all described
-        functions.
       o Change DES API to clean up the namespace (some applications link also
         against libdes providing similar functions having the same name).
         Provide macros for backward compatibility (will be removed in the
         future).
-      o Unify handling of cryptographic algorithms (software and engine)
-        to be available via EVP routines for asymmetric and symmetric ciphers.
+      o Unifiy handling of cryptographic algorithms (software and
+        engine) to be available via EVP routines for asymmetric and
+        symmetric ciphers.
       o NCONF: new configuration handling routines.
       o Change API to use more 'const' modifiers to improve error checking
         and help optimizers.
@@ -68,60 +31,14 @@
       o Reworked parts of the BIGNUM code.
       o Support for new engines: Broadcom ubsec, Accelerated Encryption
         Processing, IBM 4758.
-      o A few new engines added in the demos area.
-      o Extended and corrected OID (object identifier) table.
       o PRNG: query at more locations for a random device, automatic query for
         EGD style random sources at several locations.
       o SSL/TLS: allow optional cipher choice according to server's preference.
       o SSL/TLS: allow server to explicitly set new session ids.
       o SSL/TLS: support Kerberos cipher suites (RFC2712).
-	Only supports MIT Kerberos for now.
       o SSL/TLS: allow more precise control of renegotiations and sessions.
       o SSL/TLS: add callback to retrieve SSL/TLS messages.
-      o SSL/TLS: support AES cipher suites (RFC3268).
-
-  Major changes between OpenSSL 0.9.6j and OpenSSL 0.9.6k:
-
-      o Security: fix various ASN1 parsing bugs.
-      o SSL/TLS protocol fix for unrequested client certificates.
-
-  Major changes between OpenSSL 0.9.6i and OpenSSL 0.9.6j:
-
-      o Security: counter the Klima-Pokorny-Rosa extension of
-        Bleichbacher's attack 
-      o Security: make RSA blinding default.
-      o Build: shared library support fixes.
-
-  Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
-
-      o Important security related bugfixes.
-
-  Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:
-
-      o New configuration targets for Tandem OSS and A/UX.
-      o New OIDs for Microsoft attributes.
-      o Better handling of SSL session caching.
-      o Better comparison of distinguished names.
-      o Better handling of shared libraries in a mixed GNU/non-GNU environment.
-      o Support assembler code with Borland C.
-      o Fixes for length problems.
-      o Fixes for uninitialised variables.
-      o Fixes for memory leaks, some unusual crashes and some race conditions.
-      o Fixes for smaller building problems.
-      o Updates of manuals, FAQ and other instructive documents.
-
-  Major changes between OpenSSL 0.9.6f and OpenSSL 0.9.6g:
-
-      o Important building fixes on Unix.
-
-  Major changes between OpenSSL 0.9.6e and OpenSSL 0.9.6f:
-
-      o Various important bugfixes.
-
-  Major changes between OpenSSL 0.9.6d and OpenSSL 0.9.6e:
-
-      o Important security related bugfixes.
-      o Various SSL/TLS library bugfixes.
+      o SSL/TLS: add draft AES ciphersuites (disabled unless explicitly requested).
 
   Major changes between OpenSSL 0.9.6c and OpenSSL 0.9.6d:
 
@@ -174,7 +91,7 @@
       o Bug fixes for Win32, HP/UX and Irix.
       o Bug fixes in BIGNUM, SSL, PKCS#7, PKCS#12, X.509, CONF and
         memory checking routines.
-      o Bug fixes for RSA operations in threaded environments.
+      o Bug fixes for RSA operations in threaded enviroments.
       o Bug fixes in misc. openssl applications.
       o Remove a few potential memory leaks.
       o Add tighter checks of BIGNUM routines.

Netware/build.bat

@@ -1,204 +0,0 @@
-@echo off
-
-rem ========================================================================
-rem   Batch file to automate building OpenSSL for NetWare.
-rem
-rem   usage:
-rem      build [target] [debug opts] [assembly opts] [configure opts]
-rem
-rem      target        - "netware-clib" - CLib NetWare build
-rem                    - "netware-libc" - LibC NKS NetWare build
-rem 
-rem      debug opts    - "debug"  - build debug
-rem
-rem      assembly opts - "nw-mwasm" - use Metrowerks assembler
-rem      "nw-nasm"  - use NASM assembler
-rem      "no-asm"   - don't use assembly
-rem
-rem      configure opts- all unrecognized arguments are passed to the
-rem                       perl configure script
-rem
-rem   If no arguments are specified the default is to build non-debug with
-rem   no assembly.  NOTE: there is no default BLD_TARGET.
-rem
-
-
-
-rem   No assembly is the default - Uncomment section below to change
-rem   the assembler default
-set ASM_MODE=
-set ASSEMBLER=
-set NO_ASM=no-asm
-
-rem   Uncomment to default to the Metrowerks assembler
-rem set ASM_MODE=nw-mwasm
-rem set ASSEMBLER=Metrowerks
-rem set NO_ASM=
-
-rem   Uncomment to default to the NASM assembler
-rem set ASM_MODE=nw-nasm
-rem set ASSEMBLER=NASM
-rem set NO_ASM=
-
-rem   No default Bld target
-set BLD_TARGET=no_target
-rem set BLD_TARGET=netware-clib
-rem set BLD_TARGET=netware-libc
-
-
-rem   Default to build non-debug
-set DEBUG=
-                                    
-rem   Uncomment to default to debug build
-rem set DEBUG=debug
-
-
-set CONFIG_OPTS=
-set ARG_PROCESSED=NO
-
-
-rem   Process command line args
-:opts
-if "a%1" == "a" goto endopt
-if "%1" == "no-asm"   set NO_ASM=no-asm
-if "%1" == "no-asm"   set ARG_PROCESSED=YES
-if "%1" == "debug"    set DEBUG=debug
-if "%1" == "debug"    set ARG_PROCESSED=YES
-if "%1" == "nw-nasm"  set ASM_MODE=nw-nasm
-if "%1" == "nw-nasm"  set ASSEMBLER=NASM
-if "%1" == "nw-nasm"  set NO_ASM=
-if "%1" == "nw-nasm"  set ARG_PROCESSED=YES
-if "%1" == "nw-mwasm" set ASM_MODE=nw-mwasm
-if "%1" == "nw-mwasm" set ASSEMBLER=Metrowerks
-if "%1" == "nw-mwasm"  set NO_ASM=
-if "%1" == "nw-mwasm" set ARG_PROCESSED=YES
-if "%1" == "netware-clib" set BLD_TARGET=netware-clib
-if "%1" == "netware-clib" set ARG_PROCESSED=YES
-if "%1" == "netware-libc" set BLD_TARGET=netware-libc
-if "%1" == "netware-libc" set ARG_PROCESSED=YES
-
-rem   If we didn't recognize the argument, consider it an option for config
-if "%ARG_PROCESSED%" == "NO" set CONFIG_OPTS=%CONFIG_OPTS% %1
-if "%ARG_PROCESSED%" == "YES" set ARG_PROCESSED=NO
-
-shift
-goto opts
-:endopt
-
-rem make sure a valid BLD_TARGET was specified
-if "%BLD_TARGET%" == "no_target" goto no_target
-
-rem build the nlm make file name which includes target and debug info
-set NLM_MAKE=
-if "%BLD_TARGET%" == "netware-clib" set NLM_MAKE=netware\nlm_clib
-if "%BLD_TARGET%" == "netware-libc" set NLM_MAKE=netware\nlm_libc
-if "%DEBUG%" == "" set NLM_MAKE=%NLM_MAKE%.mak
-if "%DEBUG%" == "debug" set NLM_MAKE=%NLM_MAKE%_dbg.mak
-
-if "%NO_ASM%" == "no-asm" set ASM_MODE=
-if "%NO_ASM%" == "no-asm" set ASSEMBLER=
-if "%NO_ASM%" == "no-asm" set CONFIG_OPTS=%CONFIG_OPTS% no-asm
-if "%NO_ASM%" == "no-asm" goto do_config
-
-
-rem ==================================================
-echo Generating x86 for %ASSEMBLER% assembler
-
-echo Bignum
-cd crypto\bn\asm
-perl x86.pl %ASM_MODE% > bn-nw.asm
-cd ..\..\..
-
-echo DES
-cd crypto\des\asm
-perl des-586.pl %ASM_MODE% > d-nw.asm
-cd ..\..\..
-
-echo "crypt(3)"
-
-cd crypto\des\asm
-perl crypt586.pl %ASM_MODE% > y-nw.asm
-cd ..\..\..
-
-echo Blowfish
-
-cd crypto\bf\asm
-perl bf-586.pl %ASM_MODE% > b-nw.asm
-cd ..\..\..
-
-echo CAST5
-cd crypto\cast\asm
-perl cast-586.pl %ASM_MODE% > c-nw.asm
-cd ..\..\..
-
-echo RC4
-cd crypto\rc4\asm
-perl rc4-586.pl %ASM_MODE% > r4-nw.asm
-cd ..\..\..
-
-echo MD5
-cd crypto\md5\asm
-perl md5-586.pl %ASM_MODE% > m5-nw.asm
-cd ..\..\..
-
-echo SHA1
-cd crypto\sha\asm
-perl sha1-586.pl %ASM_MODE% > s1-nw.asm
-cd ..\..\..
-
-echo RIPEMD160
-cd crypto\ripemd\asm
-perl rmd-586.pl %ASM_MODE% > rm-nw.asm
-cd ..\..\..
-
-echo RC5\32
-cd crypto\rc5\asm
-perl rc5-586.pl %ASM_MODE% > r5-nw.asm
-cd ..\..\..
-
-rem ===============================================================
-rem
-:do_config
-
-echo .
-echo configure options: %CONFIG_OPTS% %BLD_TARGET%
-echo .
-perl configure %CONFIG_OPTS% %BLD_TARGET%
-
-perl util\mkfiles.pl >MINFO
-
-echo .
-echo mk1mf.pl options: %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET%
-echo .
-perl util\mk1mf.pl %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET% >%NLM_MAKE%
-
-echo The makefile "%NLM_MAKE%" has been created use your maketool to
-echo build (ex: gmake -f %NLM_MAKE%)
-goto end
-
-rem ===============================================================
-rem
-:no_target
-echo .
-echo .  No build target specified!!!
-echo .
-echo .  usage: build [target] [debug opts] [assembly opts] [configure opts]
-echo .
-echo .     target        - "netware-clib" - CLib NetWare build
-echo .                   - "netware-libc" - LibC NKS NetWare build
-echo .
-echo .     debug opts    - "debug"  - build debug
-echo .
-echo .     assembly opts - "nw-mwasm" - use Metrowerks assembler
-echo .                     "nw-nasm"  - use NASM assembler
-echo .                     "no-asm"   - don't use assembly
-echo .
-echo .     configure opts- all unrecognized arguments are passed to the
-echo .                      perl configure script
-echo .
-echo .  If no debug or assembly opts are specified the default is to build
-echo .  non-debug without assembly
-echo .
-
-        
-:end        

Netware/cpy_tests.bat

@@ -1,112 +0,0 @@
-@echo off
-
-rem   Batch file to copy OpenSSL stuff to a NetWare server for testing
-
-rem   This batch file will create an "opensssl" directory at the root of the
-rem   specified NetWare drive and copy the required files to run the tests.
-rem   It should be run from inside the "openssl\netware" subdirectory.
-
-rem   Usage:
-rem      cpy_tests.bat <test subdirectory> <NetWare drive>
-rem          <test subdirectory> - out_nw.dbg | out_nw
-rem          <NetWare drive> - any mapped drive letter
-rem
-rem      example ( copy from debug build to m: dirve ):
-rem              cpy_tests.bat out_nw.dbg m:
-rem
-rem      CAUTION:  If a directory named OpenSSL exists on the target drive
-rem                it will be deleted first.
-
-
-if "%1" == "" goto usage
-if "%2" == "" goto usage
-
-rem   Assume running in \openssl directory unless cpy_tests.bat exists then
-rem   it must be the \openssl\netware directory
-set loc=.
-if exist cpy_tests.bat set loc=..
-
-rem   make sure the local build subdirectory specified is valid
-if not exist %loc%\%1\NUL goto invalid_dir
-
-rem   make sure target drive is valid
-if not exist %2\NUL goto invalid_drive
-
-rem   If an OpenSSL directory exists on the target drive, remove it
-if exist %2\openssl\NUL goto remove_openssl
-goto do_copy
-
-:remove_openssl
-echo .
-echo OpenSSL directory exists on %2 - it will be removed!
-pause
-rmdir %2\openssl /s /q
-
-:do_copy
-rem   make an "openssl" directory and others at the root of the NetWare drive
-mkdir %2\openssl
-mkdir %2\openssl\test_out
-mkdir %2\openssl\apps
-mkdir %2\openssl\certs
-mkdir %2\openssl\test
-
-
-rem   copy the test nlms
-copy %loc%\%1\*.nlm %2\openssl\
-
-rem   copy the test perl script
-copy %loc%\netware\do_tests.pl %2\openssl\
-
-rem   copy the certs directory stuff
-xcopy %loc%\certs\*.*         %2\openssl\certs\ /s
-
-rem   copy the test directory stuff
-copy %loc%\test\CAss.cnf      %2\openssl\test\
-copy %loc%\test\Uss.cnf       %2\openssl\test\
-copy %loc%\test\pkcs7.pem     %2\openssl\test\
-copy %loc%\test\pkcs7-1.pem   %2\openssl\test\
-copy %loc%\test\testcrl.pem   %2\openssl\test\
-copy %loc%\test\testp7.pem    %2\openssl\test\
-copy %loc%\test\testreq2.pem  %2\openssl\test\
-copy %loc%\test\testrsa.pem   %2\openssl\test\
-copy %loc%\test\testsid.pem   %2\openssl\test\
-copy %loc%\test\testx509.pem  %2\openssl\test\
-copy %loc%\test\v3-cert1.pem  %2\openssl\test\
-copy %loc%\test\v3-cert2.pem  %2\openssl\test\
-
-rem   copy the apps directory stuff
-copy %loc%\apps\client.pem    %2\openssl\apps\
-copy %loc%\apps\server.pem    %2\openssl\apps\
-copy %loc%\apps\openssl.cnf   %2\openssl\apps\
-
-echo .
-echo Tests copied
-echo Run the test script at the console by typing:
-echo     "Perl \openssl\do_tests.pl"
-echo .
-echo Make sure the Search path includes the OpenSSL subdirectory
-
-goto end
-
-:invalid_dir
-echo.
-echo Invalid build directory specified: %1
-echo.
-goto usage
-
-:invalid_drive
-echo.
-echo Invalid drive: %2
-echo.
-goto usage
-
-:usage
-echo.
-echo usage: cpy_tests.bat [test subdirectory] [NetWare drive]
-echo     [test subdirectory] - out_nw_clib.dbg, out_nw_libc.dbg, etc. 
-echo     [NetWare drive]     - any mapped drive letter
-echo.
-echo example: cpy_test out_nw_clib.dbg M:
-echo  (copy from clib debug build area to M: drive)
-
-:end

Netware/do_tests.pl

@@ -1,585 +0,0 @@
-# perl script to run OpenSSL tests
-
-
-my $base_path      = "\\openssl";
-
-my $output_path    = "$base_path\\test_out";
-my $cert_path      = "$base_path\\certs";
-my $test_path      = "$base_path\\test";
-my $app_path       = "$base_path\\apps";
-
-my $tmp_cert       = "$output_path\\cert.tmp";
-my $OpenSSL_config = "$app_path\\openssl.cnf";
-my $log_file       = "$output_path\\tests.log";
-
-my $pause = 0;
-
-
-#  process the command line args to see if they wanted us to pause
-#  between executing each command
-foreach $i (@ARGV)
-{
-   if ($i =~ /^-p$/)
-   { $pause=1; }
-}
-
-
-
-main();
-
-
-############################################################################
-sub main()
-{
-   # delete all the output files in the output directory
-   unlink <$output_path\\*.*>;
-
-   # open the main log file 
-   open(OUT, ">$log_file") || die "unable to open $log_file\n";
-
-   
-   algorithm_tests();
-   encryption_tests();
-   pem_tests();
-   verify_tests();
-   ssl_tests();
-   ca_tests();
-
-   close(OUT);
-
-   print("\nCompleted running tests.\n\n");
-   print("Check log file for errors: $log_file\n");
-}
-
-############################################################################
-sub algorithm_tests
-{
-   my $i;
-   my $outFile;
-   my @tests = ( rsa_test, destest, ideatest, bftest, shatest, sha1test,
-                 md5test, dsatest, md2test, mdc2test, rc2test, rc4test, randtest,
-                 dhtest, exptest );
-
-   print( "\nRUNNING CRYPTO ALGORITHM TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "CRYPTO ALGORITHM TESTS:\n\n");
-
-   foreach $i (@tests)
-   {
-      $outFile = "$output_path\\$i.out";
-      system("$i > $outFile");
-      log_desc("Test: $i\.nlm:");
-      log_output("", $outFile );
-   }
-}
-
-############################################################################
-sub encryption_tests
-{
-   my $i;
-   my $outFile;
-   my @enc_tests = ( "enc", "rc4", "des-cfb", "des-ede-cfb", "des-ede3-cfb",
-                     "des-ofb", "des-ede-ofb", "des-ede3-ofb",
-                     "des-ecb", "des-ede", "des-ede3", "des-cbc",
-                     "des-ede-cbc", "des-ede3-cbc", "idea-ecb", "idea-cfb",
-                     "idea-ofb", "idea-cbc", "rc2-ecb", "rc2-cfb",
-                     "rc2-ofb", "rc2-cbc", "bf-ecb", "bf-cfb",
-                     "bf-ofb", "bf-cbc" );
-
-   my $input = "$base_path\\do_tests.pl";
-   my $cipher = "$output_path\\cipher.out";
-   my $clear = "$output_path\\clear.out";
-
-   print( "\nRUNNING ENCRYPTION & DECRYPTION TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "FILE ENCRYPTION & DECRYPTION TESTS:\n\n");
-
-   foreach $i (@enc_tests)
-   {
-      log_desc("Testing: $i");
-
-      # do encryption
-      $outFile = "$output_path\\enc.out";
-      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher > $outFile" );
-      log_output("Encrypting: $input --> $cipher", $outFile);
-
-      # do decryption
-      $outFile = "$output_path\\dec.out";
-      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear > $outFile");
-      log_output("Decrypting: $cipher --> $clear", $outFile);
-
-      # compare files
-      $x = compare_files( $input, $clear, 1);
-      if ( $x == 0 )
-      {
-         print( "SUCCESS - files match: $input, $clear\n");
-         print( OUT "SUCCESS - files match: $input, $clear\n");
-      }
-      else
-      {
-         print( "ERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-
-      do_wait();
-
-      # Now do the same encryption but use Base64
-
-      # do encryption B64
-      $outFile = "$output_path\\B64enc.out";
-      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher > $outFile");
-      log_output("Encrypting(B64): $cipher --> $clear", $outFile);
-
-      # do decryption B64
-      $outFile = "$output_path\\B64dec.out";
-      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear > $outFile");
-      log_output("Decrypting(B64): $cipher --> $clear", $outFile);
-
-      # compare files
-      $x = compare_files( $input, $clear, 1);
-      if ( $x == 0 )
-      {
-         print( "SUCCESS - files match: $input, $clear\n");
-         print( OUT "SUCCESS - files match: $input, $clear\n");
-      }
-      else
-      {
-         print( "ERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-
-      do_wait();
-
-   } # end foreach
-
-   # delete the temporary files
-   unlink($cipher);
-   unlink($clear);
-}
-
-
-############################################################################
-sub pem_tests
-{
-   my $i;
-   my $tmp_out;
-   my $outFile = "$output_path\\pem.out";
-
-   my %pem_tests = (
-         "crl"      => "testcrl.pem",
-          "pkcs7"   => "testp7.pem",
-          "req"     => "testreq2.pem",
-          "rsa"     => "testrsa.pem",
-          "x509"    => "testx509.pem",
-          "x509"    => "v3-cert1.pem",
-          "sess_id" => "testsid.pem"  );
-
-
-   print( "\nRUNNING PEM TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "PEM TESTS:\n\n");
-
-   foreach $i (keys(%pem_tests))
-   {
-      log_desc( "Testing: $i");
-
-      my $input = "$test_path\\$pem_tests{$i}";
-
-      $tmp_out = "$output_path\\$pem_tests{$i}";
-
-      if ($i ne "req" )
-      {
-         system("openssl2 $i -in $input -out $tmp_out > $outFile");
-         log_output( "openssl2 $i -in $input -out $tmp_out", $outFile);
-      }
-      else
-      {
-         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config > $outFile");
-         log_output( "openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config", $outFile );
-      }
-
-      $x = compare_files( $input, $tmp_out);
-      if ( $x == 0 )
-      {
-         print( "SUCCESS - files match: $input, $tmp_out\n");
-         print( OUT "SUCCESS - files match: $input, $tmp_out\n");
-      }
-      else
-      {
-         print( "ERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-      do_wait();
-
-   } # end foreach
-}
-
-
-############################################################################
-sub verify_tests
-{
-   my $i;
-   my $outFile = "$output_path\\verify.out";
-
-   my @cert_files = <$cert_path\\*.pem>;
-
-   print( "\nRUNNING VERIFY TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "VERIFY TESTS:\n\n");
-
-   make_tmp_cert_file();
-
-   foreach $i (@cert_files)
-   {
-      system("openssl2 verify -CAfile $tmp_cert $i >$outFile");
-      log_desc("Verifying cert: $i");
-      log_output("openssl2 verify -CAfile $tmp_cert $i", $outFile);
-   }
-}
-
-
-############################################################################
-sub ssl_tests
-{
-   my $outFile = "$output_path\\ssl_tst.out";
-
-   print( "\nRUNNING SSL TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "SSL TESTS:\n\n");
-
-   make_tmp_cert_file();
-
-   system("ssltest -ssl2 >$outFile");
-   log_desc("Testing sslv2:");
-   log_output("ssltest -ssl2", $outFile);
-
-   system("ssltest -ssl2 -server_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2 with server authentication:");
-   log_output("ssltest -ssl2 -server_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -ssl2 -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2 with client authentication:");
-   log_output("ssltest -ssl2 -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -ssl2 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2 with both client and server authentication:");
-   log_output("ssltest -ssl2 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -ssl3 >$outFile");
-   log_desc("Testing sslv3:");
-   log_output("ssltest -ssl3", $outFile);
-
-   system("ssltest -ssl3 -server_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv3 with server authentication:");
-   log_output("ssltest -ssl3 -server_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -ssl3 -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv3 with client authentication:");
-   log_output("ssltest -ssl3 -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -ssl3 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv3 with both client and server authentication:");
-   log_output("ssltest -ssl3 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest >$outFile");
-   log_desc("Testing sslv2/sslv3:");
-   log_output("ssltest", $outFile);
-
-   system("ssltest -server_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2/sslv3 with server authentication:");
-   log_output("ssltest -server_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2/sslv3 with client authentication:");
-   log_output("ssltest -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -server_auth -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2/sslv3 with both client and server authentication:");
-   log_output("ssltest -server_auth -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -bio_pair -ssl2 >$outFile");
-   log_desc("Testing sslv2 via BIO pair:");
-   log_output("ssltest -bio_pair -ssl2", $outFile);
-
-   system("ssltest -bio_pair -dhe1024dsa -v >$outFile");
-   log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
-   log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
-
-   system("ssltest -bio_pair -ssl2 -server_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2 with server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -ssl2 -server_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -bio_pair -ssl2 -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2 with client authentication via BIO pair:");
-   log_output("ssltest -bio_pair -ssl2 -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -bio_pair -ssl2 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -ssl2 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -bio_pair -ssl3 >$outFile");
-   log_desc("Testing sslv3 via BIO pair:");
-   log_output("ssltest -bio_pair -ssl3", $outFile);
-
-   system("ssltest -bio_pair -ssl3 -server_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv3 with server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -ssl3 -server_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -bio_pair -ssl3 -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv3 with client authentication  via BIO pair:");
-   log_output("ssltest -bio_pair -ssl3 -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -bio_pair -ssl3 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv3 with both client and server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -ssl3 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -bio_pair >$outFile");
-   log_desc("Testing sslv2/sslv3 via BIO pair:");
-   log_output("ssltest -bio_pair", $outFile);
-
-   system("ssltest -bio_pair -server_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2/sslv3 with server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -server_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -bio_pair -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2/sslv3 with client authentication via BIO pair:");
-   log_output("ssltest -bio_pair -client_auth -CAfile $tmp_cert", $outFile);
-
-   system("ssltest -bio_pair -server_auth -client_auth -CAfile $tmp_cert >$outFile");
-   log_desc("Testing sslv2/sslv3 with both client and server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -server_auth -client_auth -CAfile $tmp_cert", $outFile);
-}
-
-
-############################################################################
-sub ca_tests
-{
-   my $outFile = "$output_path\\ca_tst.out";
-
-   my($CAkey)     = "$output_path\\keyCA.ss";
-   my($CAcert)    = "$output_path\\certCA.ss";
-   my($CAserial)  = "$output_path\\certCA.srl";
-   my($CAreq)     = "$output_path\\reqCA.ss";
-   my($CAreq2)    = "$output_path\\req2CA.ss";
-
-   my($CAconf)    = "$test_path\\CAss.cnf";
-
-   my($Uconf)     = "$test_path\\Uss.cnf";
-
-   my($Ukey)      = "$output_path\\keyU.ss";
-   my($Ureq)      = "$output_path\\reqU.ss";
-   my($Ucert)     = "$output_path\\certU.ss";
-
-   print( "\nRUNNING CA TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "CA TESTS:\n");
-
-   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new >$outFile");
-   log_desc("Make a certificate request using req:");
-   log_output("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new", $outFile);
-
-   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey >$outFile");
-   log_desc("Convert the certificate request into a self signed certificate using x509:");
-   log_output("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey", $outFile);
-
-   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 >$outFile");
-   log_desc("Convert a certificate into a certificate request using 'x509':");
-   log_output("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2", $outFile);
-
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout >$outFile");
-   log_output("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout", $outFile);
-
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout >$outFile");
-   log_output( "openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout", $outFile);
-
-   system("openssl2 verify -CAfile $CAcert $CAcert >$outFile");
-   log_output("openssl2 verify -CAfile $CAcert $CAcert", $outFile);
-
-   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new >$outFile");
-   log_desc("Make another certificate request using req:");
-   log_output("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new", $outFile);
-
-   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial >$outFile");
-   log_desc("Sign certificate request with the just created CA via x509:");
-   log_output("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial", $outFile);
-
-   system("openssl2 verify -CAfile $CAcert $Ucert >$outFile");
-   log_output("openssl2 verify -CAfile $CAcert $Ucert", $outFile);
-
-   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert >$outFile");
-   log_desc("Certificate details");
-   log_output("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert", $outFile);
-
-   print(OUT "-- \n");
-   print(OUT "The generated CA certificate is $CAcert\n");
-   print(OUT "The generated CA private key is $CAkey\n");
-   print(OUT "The current CA signing serial number is in $CAserial\n");
-
-   print(OUT "The generated user certificate is $Ucert\n");
-   print(OUT "The generated user private key is $Ukey\n");
-   print(OUT "--\n");
-}
-
-############################################################################
-sub log_output( $ $ )
-{
-   my( $desc, $file ) = @_;
-   my($error) = 0;
-   my($key);
-   my($msg);
-
-   if ($desc)
-   {
-      print("$desc\n");
-      print(OUT "$desc\n");
-   }
-
-      # loop waiting for test program to complete
-   while ( stat($file) == 0)
-      { print(". "); sleep(1); }
-
-
-      # copy test output to log file
-   open(IN, "<$file");
-   while (<IN>)
-   { 
-      print(OUT $_); 
-      if ( $_ =~ /ERROR/ )
-      {
-         $error = 1;
-      }
-   }
-      # close and delete the temporary test output file
-   close(IN);
-   unlink($file);
-
-   if ( $error == 0 )
-   {
-      $msg = "Test Succeeded";
-   }
-   else
-   {
-      $msg = "Test Failed";
-   }
-
-   print(OUT "$msg\n");
-
-   if ($pause)
-   {
-      print("$msg - press ENTER to continue...");
-      $key = getc;
-      print("\n");
-   }
-      
-      # Several of the testing scripts run a loop loading the 
-      # same NLM with different options.
-      # On slow NetWare machines there appears to be some delay in the 
-      # OS actually unloading the test nlms and the OS complains about.
-      # the NLM already being loaded.  This additional pause is to 
-      # to help provide a little more time for unloading before trying to 
-      # load again.
-   sleep(1);
-}
-
-
-############################################################################
-sub log_desc( $ )
-{
-   my( $desc ) = @_;
-
-   print("\n");
-   print("$desc\n");
-
-   print(OUT "\n");
-   print(OUT "$desc\n");
-   print(OUT "======================================\n");
-}
-
-############################################################################
-sub compare_files( $ $ $ )
-{
-   my( $file1, $file2, $binary ) = @_;
-   my( $n1, $n2, $b1, $b2 );
-   my($ret) = 1;
-
-   open(IN0, $file1) || die "\nunable to open $file1\n";
-   open(IN1, $file2) || die "\nunable to open $file2\n";
-
-  if ($binary)
-  {
-      binmode IN0;
-      binmode IN1;
-  }
-
-   for (;;)
-   {
-      $n1 = read(IN0, $b1, 512);
-      $n2 = read(IN1, $b2, 512);
-
-      if ($n1 != $n2) {last;}
-      if ($b1 != $b2) {last;}
-
-      if ($n1 == 0)
-      {
-         $ret = 0;
-         last;
-      }
-   }
-   close(IN0);
-   close(IN1);
-   return($ret);
-}
-
-############################################################################
-sub do_wait()
-{
-   my($key);
-
-   if ($pause)
-   {
-      print("Press ENTER to continue...");
-      $key = getc;
-      print("\n");
-   }
-}
-
-
-############################################################################
-sub make_tmp_cert_file()
-{
-   my @cert_files = <$cert_path\\*.pem>;
-
-      # delete the file if it already exists
-   unlink($tmp_cert);
-
-   open( TMP_CERT, ">$tmp_cert") || die "\nunable to open $tmp_cert\n";
-
-   print("building temporary cert file\n");
-   
-   # create a temporary cert file that contains all the certs
-   foreach $i (@cert_files)
-   {
-      open( IN_CERT, $i ) || die "\nunable to open $i\n";
-
-      for(;;)
-      {
-         $n = sysread(IN_CERT, $data, 1024);
-
-         if ($n == 0)
-         {
-            close(IN_CERT);
-            last;
-         };
-
-         syswrite(TMP_CERT, $data, $n);
-      }
-   }
-
-   close( TMP_CERT );
-}

Netware/globals.txt

@@ -1,254 +0,0 @@
-An initial review of the OpenSSL code was done to determine how many 
-global variables where present.  The idea was to determine the amount of 
-work required to pull the globals into an instance data structure in 
-order to build a Library NLM for NetWare.  This file contains the results 
-of the review.  Each file is listed along with the globals in the file.  
-The initial review was done very quickly so this list is probably
-not a comprehensive list.
-
-
-cryptlib.c
-===========================================
-
-static STACK *app_locks=NULL;
-
-static STACK_OF(CRYPTO_dynlock) *dyn_locks=NULL;
-
-static void (MS_FAR *locking_callback)(int mode,int type,
-   const char *file,int line)=NULL;
-static int (MS_FAR *add_lock_callback)(int *pointer,int amount,
-   int type,const char *file,int line)=NULL;
-static unsigned long (MS_FAR *id_callback)(void)=NULL;
-static struct CRYPTO_dynlock_value *(MS_FAR *dynlock_create_callback)
-   (const char *file,int line)=NULL;
-static void (MS_FAR *dynlock_lock_callback)(int mode,
-   struct CRYPTO_dynlock_value *l, const char *file,int line)=NULL;
-static void (MS_FAR *dynlock_destroy_callback)(struct CRYPTO_dynlock_value *l,
-   const char *file,int line)=NULL;
-
-
-mem.c
-===========================================
-static int allow_customize = 1;      /* we provide flexible functions for */
-static int allow_customize_debug = 1;/* exchanging memory-related functions at
-
-/* may be changed as long as `allow_customize' is set */
-static void *(*malloc_locked_func)(size_t)  = malloc;
-static void (*free_locked_func)(void *)     = free;
-static void *(*malloc_func)(size_t)         = malloc;
-static void *(*realloc_func)(void *, size_t)= realloc;
-static void (*free_func)(void *)            = free;
-
-/* use default functions from mem_dbg.c */
-static void (*malloc_debug_func)(void *,int,const char *,int,int)
-   = CRYPTO_dbg_malloc;
-static void (*realloc_debug_func)(void *,void *,int,const char *,int,int)
-   = CRYPTO_dbg_realloc;
-static void (*free_debug_func)(void *,int) = CRYPTO_dbg_free;
-static void (*set_debug_options_func)(long) = CRYPTO_dbg_set_options;
-static long (*get_debug_options_func)(void) = CRYPTO_dbg_get_options;
-
-
-mem_dbg.c
-===========================================
-static int mh_mode=CRYPTO_MEM_CHECK_OFF;
-static unsigned long order = 0; /* number of memory requests */
-static LHASH *mh=NULL; /* hash-table of memory requests (address as key) */
-
-static LHASH *amih=NULL; /* hash-table with those app_mem_info_st's */
-static long options =             /* extra information to be recorded */
-static unsigned long disabling_thread = 0;
-
-
-err.c
-===========================================
-static LHASH *error_hash=NULL;
-static LHASH *thread_hash=NULL;
-
-several files have routines with static "init" to track if error strings
-   have been loaded ( may not want seperate error strings for each process )
-   The "init" variable can't be left "global" because the error has is a ptr
-   that is malloc'ed.  The malloc'ed error has is dependant on the "init"
-   vars.
-
-   files:
-      pem_err.c
-      cpt_err.c
-      pk12err.c
-      asn1_err.c
-      bio_err.c
-      bn_err.c
-      buf_err.c
-      comp_err.c
-      conf_err.c
-      cpt_err.c
-      dh_err.c
-      dsa_err.c
-      dso_err.c
-      evp_err.c
-      obj_err.c
-      pkcs7err.c
-      rand_err.c
-      rsa_err.c
-      rsar_err.c
-      ssl_err.c
-      x509_err.c
-      v3err.c
-		err.c
-
-These file have similar "init" globals but they are for other stuff not
-error strings:
-
-		bn_lib.c
-		ecc_enc.c
-		s23_clnt.c
-		s23_meth.c
-		s23_srvr.c
-		s2_clnt.c
-		s2_lib.c
-		s2_meth.c
-		s2_srvr.c
-		s3_clnt.c
-		s3_lib.c
-		s3_srvr.c
-		t1_clnt.c
-		t1_meth.c
-		t1_srvr.c
-
-rand_lib.c
-===========================================
-static RAND_METHOD *rand_meth= &rand_ssleay_meth;
-
-md_rand.c
-===========================================
-static int state_num=0,state_index=0;
-static unsigned char state[STATE_SIZE+MD_DIGEST_LENGTH];
-static unsigned char md[MD_DIGEST_LENGTH];
-static long md_count[2]={0,0};
-static double entropy=0;
-static int initialized=0;
-
-/* This should be set to 1 only when ssleay_rand_add() is called inside
-   an already locked state, so it doesn't try to lock and thereby cause
-   a hang.  And it should always be reset back to 0 before unlocking. */
-static int add_do_not_lock=0;
-
-obj_dat.c
-============================================
-static int new_nid=NUM_NID;
-static LHASH *added=NULL;
-
-b_sock.c
-===========================================
-static unsigned long BIO_ghbn_hits=0L;
-static unsigned long BIO_ghbn_miss=0L;
-static struct ghbn_cache_st
-   {
-   char name[129];
-   struct hostent *ent;
-   unsigned long order;
-   } ghbn_cache[GHBN_NUM];
-
-static int wsa_init_done=0;
-
-
-bio_lib.c
-===========================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *bio_meth=NULL;
-static int bio_meth_num=0;
-
-
-bn_lib.c
-========================================
-static int bn_limit_bits=0;
-static int bn_limit_num=8;        /* (1<<bn_limit_bits) */
-static int bn_limit_bits_low=0;
-static int bn_limit_num_low=8;    /* (1<<bn_limit_bits_low) */
-static int bn_limit_bits_high=0;
-static int bn_limit_num_high=8;   /* (1<<bn_limit_bits_high) */
-static int bn_limit_bits_mont=0;
-static int bn_limit_num_mont=8;   /* (1<<bn_limit_bits_mont) */
-
-conf_lib.c
-========================================
-static CONF_METHOD *default_CONF_method=NULL;
-
-dh_lib.c
-========================================
-static DH_METHOD *default_DH_method;
-static int dh_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dh_meth = NULL;
-
-dsa_lib.c
-========================================
-static DSA_METHOD *default_DSA_method;
-static int dsa_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dsa_meth = NULL;
-
-dso_lib.c
-========================================
-static DSO_METHOD *default_DSO_meth = NULL;
-
-rsa_lib.c
-========================================
-static RSA_METHOD *default_RSA_meth=NULL;
-static int rsa_meth_num=0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *rsa_meth=NULL;
-
-x509_trs.c
-=======================================
-static int (*default_trust)(int id, X509 *x, int flags) = obj_trust;
-static STACK_OF(X509_TRUST) *trtable = NULL;
-
-x509_req.c
-=======================================
-static int *ext_nids = ext_nid_list;
-
-o_names.c
-======================================
-static LHASH *names_lh=NULL;
-static STACK_OF(NAME_FUNCS) *name_funcs_stack;
-static int free_type;
-static int names_type_num=OBJ_NAME_TYPE_NUM;
-
-
-th-lock.c - NEED to add support for locking for NetWare
-==============================================
-static long *lock_count;
-(other platform specific globals)
-
-x_x509.c
-==============================================
-static int x509_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_meth = NULL;
-
-
-evp_pbe.c
-============================================
-static STACK *pbe_algs;
-
-evp_key.c
-============================================
-static char prompt_string[80];
-
-ssl_ciph.c
-============================================
-static STACK_OF(SSL_COMP) *ssl_comp_methods=NULL;
-
-ssl_lib.c
-=============================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_meth=NULL;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_ctx_meth=NULL;
-static int ssl_meth_num=0;
-static int ssl_ctx_meth_num=0;
-
-ssl_sess.c
-=============================================
-static int ssl_session_num=0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_session_meth=NULL;
-
-x509_vfy.c
-============================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_store_ctx_method=NULL;
-static int x509_store_ctx_num=0;
-

Netware/readme.txt

@@ -1,19 +0,0 @@
-
-Contents of the openssl\netware directory
-==========================================
-
-Regular files:
-
-readme.txt     - this file
-do_tests.pl    - perl script used to run the OpenSSL tests on NetWare
-cpy_tests.bat  - batch to to copy test stuff to NetWare server
-build.bat      - batch file to help with builds
-set_env.bat    - batch file to help setup build environments
-globals.txt    - results of initial code review to identify OpenSSL global variables
-
-
-The following files are generated by the various scripts.  They are
-recreated each time and it is okay to delete them.
-
-*.def - command files used by Metrowerks linker
-*.mak - make files generated by mk1mf.pl

Netware/set_env.bat

@@ -1,90 +0,0 @@
-@echo off
-
-rem ========================================================================
-rem   Batch file to assist in setting up the necessary enviroment for
-rem   building OpenSSL for NetWare.
-rem
-rem   usage:
-rem      set_env [target]
-rem
-rem      target      - "netware-clib" - Clib build
-rem                  - "netware-libc" - LibC build
-rem
-rem
-
-if "a%1" == "a" goto usage
-               
-set LIBC_BUILD=
-set CLIB_BUILD=
-
-if "%1" == "netware-clib" set CLIB_BUILD=Y
-if "%1" == "netware-clib" set LIBC_BUILD=
-
-if "%1" == "netware-libc"  set LIBC_BUILD=Y
-if "%1" == "netware-libc"  set CLIB_BUILD=
-
-rem   Location of tools (compiler, linker, etc)
-set TOOLS=d:\i_drive\tools
-
-rem   If Perl for Win32 is not already in your path, add it here
-set PERL_PATH=
-
-rem   Define path to the Metrowerks command line tools
-rem   ( compiler, assembler, linker)
-set METROWERKS_PATH=%TOOLS%\codewar\pdk_21\tools\command line tools
-rem set METROWERKS_PATH=%TOOLS%\codewar\PDK_40\Other Metrowerks Tools\Command Line Tools
-
-rem   If using gnu make define path to utility
-set GNU_MAKE_PATH=%TOOLS%\gnu
-
-rem   If using ms nmake define path to nmake
-set MS_NMAKE_PATH=%TOOLS%\msvc\600\bin
-
-rem   If using NASM assembler define path
-set NASM_PATH=%TOOLS%\nasm
-
-rem   Update path to include tool paths
-set path=%path%;%METROWERKS_PATH%
-if not "%GNU_MAKE_PATH%" == "" set path=%path%;%GNU_MAKE_PATH%
-if not "%MS_NMAKE_PATH%" == "" set path=%path%;%MS_NMAKE_PATH%
-if not "%NASM_PATH%"     == "" set path=%path%;%NASM_PATH%
-if not "%PERL_PATH%"     == "" set path=%path%;%PERL_PATH%
-
-rem   Set MWCIncludes to location of Novell NDK includes
-if "%LIBC_BUILD%" == "Y" set MWCIncludes=%TOOLS%\ndk\libc\include;%TOOLS%\ndk\libc\include\winsock;.\engines
-if "%CLIB_BUILD%" == "Y" set MWCIncludes=%TOOLS%\ndk\nwsdk\include\nlm;.\engines
-set include=
-
-rem   Set Imports to location of Novell NDK import files
-if "%LIBC_BUILD%" == "Y" set IMPORTS=%TOOLS%\ndk\libc\imports
-if "%CLIB_BUILD%" == "Y" set IMPORTS=%TOOLS%\ndk\nwsdk\imports
-
-rem   Set PRELUDE to the absolute path of the prelude object to link with in
-rem   the Metrowerks NetWare PDK - NOTE: for Clib builds "nwpre.obj" is 
-rem   recommended, for LibC NKS builds libcpre.o must be used
-if "%LIBC_BUILD%" == "Y" set PRELUDE=%TOOLS%\ndk\libc\imports\libcpre.o
-if "%CLIB_BUILD%" == "Y" set PRELUDE=%TOOLS%\codewar\pdk_21\novell support\metrowerks support\libraries\runtime\nwpre.obj
-
-
-if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
-if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
-
-if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
-if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
-goto end
-
-:usage
-rem ===============================================================
-echo .
-echo . No target build specified!
-echo .
-echo . usage: set_env [target]
-echo .
-echo .   target      - "netware-clib" - Clib build
-echo .               - "netware-libc" - LibC build
-echo .
-
-
-
-:end
-

PROBLEMS

@@ -1,131 +0,0 @@
-* System libcrypto.dylib and libssl.dylib are used by system ld on MacOS X.
-
-
-    NOTE: The problem described here only applies when OpenSSL isn't built
-    with shared library support (i.e. without the "shared" configuration
-    option).  If you build with shared library support, you will have no
-    problems as long as you set up DYLD_LIBRARY_PATH properly at all times.
-
-
-This is really a misfeature in ld, which seems to look for .dylib libraries
-along the whole library path before it bothers looking for .a libraries.  This
-means that -L switches won't matter unless OpenSSL is built with shared
-library support.
-
-The workaround may be to change the following lines in apps/Makefile.ssl and
-test/Makefile.ssl:
-
-  LIBCRYPTO=-L.. -lcrypto
-  LIBSSL=-L.. -lssl
-
-to:
-
-  LIBCRYPTO=../libcrypto.a
-  LIBSSL=../libssl.a
-
-It's possible that something similar is needed for shared library support
-as well.  That hasn't been well tested yet.
-
-
-Another solution that many seem to recommend is to move the libraries
-/usr/lib/libcrypto.0.9.dylib, /usr/lib/libssl.0.9.dylib to a different
-directory, build and install OpenSSL and anything that depends on your
-build, then move libcrypto.0.9.dylib and libssl.0.9.dylib back to their
-original places.  Note that the version numbers on those two libraries
-may differ on your machine.
-
-
-As long as Apple doesn't fix the problem with ld, this problem building
-OpenSSL will remain as is.
-
-
-* Parallell make leads to errors
-
-While running tests, running a parallell make is a bad idea.  Many test
-scripts use the same name for output and input files, which means different
-will interfere with each other and lead to test failure.
-
-The solution is simple for now: don't run parallell make when testing.
-
-
-* Bugs in gcc 3.0 triggered
-
-According to a problem report, there are bugs in gcc 3.0 that are
-triggered by some of the code in OpenSSL, more specifically in
-PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
-
-	header+=11;
-	if (*header != '4') return(0); header++;
-	if (*header != ',') return(0); header++;
-
-What happens is that gcc might optimize a little too agressively, and
-you end up with an extra incrementation when *header != '4'.
-
-We recommend that you upgrade gcc to as high a 3.x version as you can.
-
-* solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
-
-As subject suggests SHA-1 might perform poorly (4 times slower)
-if compiled with WorkShop 6 compiler and -xarch=v9. The cause for
-this seems to be the fact that compiler emits multiplication to
-perform shift operations:-( To work the problem around configure
-with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'.
-
-* Problems with hp-parisc2-cc target when used with "no-asm" flag
-
-When using the hp-parisc2-cc target, wrong bignum code is generated.
-This is due to the SIXTY_FOUR_BIT build being compiled with the +O3
-aggressive optimization.
-The problem manifests itself by the BN_kronecker test hanging in an
-endless loop. Reason: the BN_kronecker test calls BN_generate_prime()
-which itself hangs. The reason could be tracked down to the bn_mul_comba8()
-function in bn_asm.c. At some occasions the higher 32bit value of r[7]
-is off by 1 (meaning: calculated=shouldbe+1). Further analysis failed,
-as no debugger support possible at +O3 and additional fprintf()'s
-introduced fixed the bug, therefore it is most likely a bug in the
-optimizer.
-The bug was found in the BN_kronecker test but may also lead to
-failures in other parts of the code.
-(See Ticket #426.)
-
-Workaround: modify the target to +O2 when building with no-asm.
-
-* Poor support for AIX shared builds.
-
-do_aix-shared rule is not flexible enough to parameterize through a
-config-line. './Configure aix43-cc shared' is working, but not
-'./Configure aix64-gcc shared'. In latter case make fails to create shared
-libraries. It's possible to build 64-bit shared libraries by running
-'env OBJECT_MODE=64 make', but we need more elegant solution. Preferably one
-supporting even gcc shared builds. See RT#463 for background information.
-
-* Problems building shared libraries on SCO OpenServer Release 5.0.6
-  with gcc 2.95.3
-
-The symptoms appear when running the test suite, more specifically
-test/ectest, with the following result:
-
-OSSL_LIBPATH="`cd ..; pwd`"; LD_LIBRARY_PATH="$OSSL_LIBPATH:$LD_LIBRARY_PATH"; DYLD_LIBRARY_PATH="$OSSL_LIBPATH:$DYLD_LIBRARY_PATH"; SHLIB_PATH="$OSSL_LIBPATH:$SHLIB_PATH"; LIBPATH="$OSSL_LIBPATH:$LIBPATH"; if [ "debug-sco5-gcc" = "Cygwin" ]; then PATH="${LIBPATH}:$PATH"; fi; export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; ./ectest
-ectest.c:186: ABORT
-
-The cause of the problem seems to be that isxdigit(), called from
-BN_hex2bn(), returns 0 on a perfectly legitimate hex digit.  Further
-investigation shows that any of the isxxx() macros return 0 on any
-input.  A direct look in the information array that the isxxx() use,
-called __ctype, shows that it contains all zeroes...
-
-Taking a look at the newly created libcrypto.so with nm, one can see
-that the variable __ctype is defined in libcrypto's .bss (which
-explains why it is filled with zeroes):
-
-$ nm -Pg libcrypto.so | grep __ctype
-__ctype B 0011659c
-__ctype2 U         
-
-Curiously, __ctype2 is undefined, in spite of being declared in
-/usr/include/ctype.h in exactly the same way as __ctype.
-
-Any information helping to solve this issue would be deeply
-appreciated.
-
-NOTE: building non-shared doesn't come with this problem.

README

@@ -1,5 +1,5 @@
 
- OpenSSL 0.9.8-dev XX xxx XXXX
+ OpenSSL 0.9.7-beta1 01 Jun 2002
 
  Copyright (c) 1998-2002 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
@@ -14,13 +14,13 @@
  protocols as well as a full-strength general purpose cryptography library.
  The project is managed by a worldwide community of volunteers that use the
  Internet to communicate, plan, and develop the OpenSSL toolkit and its
- related documentation.
+ related documentation. 
 
  OpenSSL is based on the excellent SSLeay library developed from Eric A. Young
  and Tim J. Hudson.  The OpenSSL toolkit is licensed under a dual-license (the
  OpenSSL license plus the SSLeay license) situation, which basically means
  that you are free to get and use it for commercial and non-commercial
- purposes as long as you fulfill the conditions of both licenses.
+ purposes as long as you fulfill the conditions of both licenses. 
 
  OVERVIEW
  --------
@@ -53,11 +53,11 @@
         MDC2 message digest. A DES based hash that is popular on smart cards.
 
      Public Key
-        RSA encryption/decryption/generation.
+        RSA encryption/decryption/generation.  
             There is no limit on the number of bits.
-        DSA encryption/decryption/generation.
+        DSA encryption/decryption/generation.   
             There is no limit on the number of bits.
-        Diffie-Hellman key-exchange/key generation.
+        Diffie-Hellman key-exchange/key generation.  
             There is no limit on the number of bits.
 
      X.509v3 certificates
@@ -122,13 +122,6 @@
  lists the functions; you will probably have to look at the code to work out
  how to use them. Look at the example programs.
 
- PROBLEMS
- --------
-
- For some platforms, there are some known problems that may affect the user
- or application author.  We try to collect those in doc/PROBLEMS, with current
- thoughts on how they should be solved in a future of OpenSSL.
-
  SUPPORT 
  -------
 
@@ -153,13 +146,11 @@
     - Problem Description (steps that will reproduce the problem, if known)
     - Stack Traceback (if the application dumps core)
 
- Report the bug to the OpenSSL project via the Request Tracker
- (http://www.openssl.org/rt2.html) by mail to:
+ Report the bug to the OpenSSL project at:
 
     openssl-bugs@openssl.org
 
- Note that mail to openssl-bugs@openssl.org is recorded in the publicly
- readable request tracker database and is forwarded to a public
+ Note that mail to openssl-bugs@openssl.org is forwarded to a public
  mailing list. Confidential mail may be sent to openssl-security@openssl.org
  (PGP key available from the key servers).
 
@@ -173,9 +164,7 @@
  textual explanation of what your patch does.
 
  Note: For legal reasons, contributions from the US can be accepted only
- if a TSA notification and a copy of the patch is sent to crypt@bis.doc.gov;
- see http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
- and http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e)).
+ if a copy of the patch is sent to crypt@bxa.doc.gov
 
  The preferred format for changes is "diff -u" output. You might
  generate it like this:
@@ -185,4 +174,3 @@
  # ./Configure dist; make clean
  # cd ..
  # diff -ur openssl-orig openssl-work > mydiffs.patch
-

README.ENGINE

@@ -154,7 +154,7 @@
     shared-library that contains the ENGINE implementation, and "NO_VCHECK"
     might possibly be useful if there is a minor version conflict and you
     (or a vendor helpdesk) is convinced you can safely ignore it.
-    "ID" is probably only needed if a shared-library implements
+    "ENGINE_ID" is probably only needed if a shared-library implements
     multiple ENGINEs, but if you know the engine id you expect to be using,
     it doesn't hurt to specify it (and this provides a sanity check if
     nothing else). "LIST_ADD" is only required if you actually wish the
@@ -174,7 +174,7 @@
 
        ENGINE *e = ENGINE_by_id("dynamic");
        ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libfoo.so", 0);
-       ENGINE_ctrl_cmd_string(e, "ID", "foo", 0);
+       ENGINE_ctrl_cmd_string(e, "ENGINE_ID", "foo", 0);
        ENGINE_ctrl_cmd_string(e, "LOAD", NULL, 0);
        ENGINE_ctrl_cmd_string(e, "CMD_FOO", "some input data", 0);
 
@@ -184,7 +184,7 @@
 
        openssl engine dynamic \
                  -pre SO_PATH:/lib/libfoo.so \
-                 -pre ID:foo \
+                 -pre ENGINE_ID:foo \
                  -pre LOAD \
                  -pre "CMD_FOO:some input data"
 
@@ -192,7 +192,7 @@
 
        openssl engine -vvvv dynamic \
                  -pre SO_PATH:/lib/libfoo.so \
-                 -pre ID:foo \
+                 -pre ENGINE_ID:foo \
                  -pre LOAD
 
     Applications that support the ENGINE API and more specifically, the

STATUS

@@ -1,17 +1,11 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2003/02/28 15:17:45 $
+  ______________                           $Date: 2002/06/01 15:21:52 $
 
   DEVELOPMENT STATE
 
     o  OpenSSL 0.9.8:  Under development...
-    o  OpenSSL 0.9.7a: Released on February  19th, 2003
-    o  OpenSSL 0.9.7:  Released on December  31st, 2002
-    o  OpenSSL 0.9.6i: Released on February  19th, 2003
-    o  OpenSSL 0.9.6h: Released on December   5th, 2002
-    o  OpenSSL 0.9.6g: Released on August     9th, 2002
-    o  OpenSSL 0.9.6f: Released on August     8th, 2002
-    o  OpenSSL 0.9.6e: Released on July      30th, 2002
+    o  OpenSSL 0.9.7-beta1:  Released on June 1st, 2002
     o  OpenSSL 0.9.6d: Released on May        9th, 2002
     o  OpenSSL 0.9.6c: Released on December  21st, 2001
     o  OpenSSL 0.9.6b: Released on July       9th, 2001
@@ -29,7 +23,8 @@
 
   RELEASE SHOWSTOPPERS
 
-    o 
+    o BN_mod_mul verification fails for mips3-sgi-irix
+      unless configured with no-asm
 
   AVAILABLE PATCHES
 
@@ -52,19 +47,12 @@
 	UTIL (a new set of library functions to support some higher level
 	      functionality that is currently missing).
 	Shared library support for VMS.
-	Kerberos 5 authentication (Heimdal)
+	Kerberos 5 authentication
 	Constification
-	Compression
-	Attribute Certificate support
-	Certificate Pair support
-	Storage Engines (primarly an LDAP storage engine)
-	Certificate chain validation with full RFC 3280 compatibility
+	OCSP
 
   NEEDS PATCH
 
-    o  0.9.8-dev: COMPLEMENTOFALL and COMPLEMENTOFDEFAULT do not
-       handle ECCdraft cipher suites correctly.
-
     o  apps/ca.c: "Sign the certificate?" - "n" creates empty certificate file
 
     o  "OpenSSL STATUS" is never up-to-date.

VMS/mkshared.com

@@ -285,7 +285,6 @@ $       if alg_entry .eqs. "" then goto loop2
 $       if alg_entry .nes. ","
 $       then
 $         if alg_entry .eqs. "KRB5" then goto loop ! Special for now
-$	  if alg_entry .eqs. "STATIC_ENGINE" then goto loop ! Special for now
 $         if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
 $	  goto loop2
 $       endif

VMS/tcpip_shr_decc.opt

@@ -0,0 +1 @@
+sys$share:tcpip$ipc_shr.exe/share

apps/CA.pl.in

@@ -37,8 +37,7 @@
 # demoCA ... where everything is stored
 
 $SSLEAY_CONFIG=$ENV{"SSLEAY_CONFIG"};
-$DAYS="-days 365";	# 1 year
-$CADAYS="-days 1095";	# 3 years
+$DAYS="-days 365";
 $REQ="openssl req $SSLEAY_CONFIG";
 $CA="openssl ca $SSLEAY_CONFIG";
 $VERIFY="openssl verify";
@@ -47,7 +46,6 @@ $PKCS12="openssl pkcs12";
 
 $CATOP="./demoCA";
 $CAKEY="cakey.pem";
-$CAREQ="careq.pem";
 $CACERT="cacert.pem";
 
 $DIRMODE = 0777;
@@ -103,11 +101,8 @@ foreach (@ARGV) {
 		    $RET=$?;
 		} else {
 		    print "Making CA certificate ...\n";
-		    system ("$REQ -new -keyout " .
-			"${CATOP}/private/$CAKEY -out ${CATOP}/$CAREQ");
-		    system ("$CA -out ${CATOP}/$CACERT $CADAYS -batch " . 
-			"-keyfile ${CATOP}/private/$CAKEY -selfsign " .
-			"-infiles ${CATOP}/$CAREQ ");
+		    system ("$REQ -new -x509 -keyout " .
+			"${CATOP}/private/$CAKEY -out ${CATOP}/$CACERT $DAYS");
 		    $RET=$?;
 		}
 	    }

apps/CA.sh

@@ -30,8 +30,7 @@
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
 
-DAYS="-days 365"	# 1 year
-CADAYS="-days 1095"	# 3 years
+DAYS="-days 365"
 REQ="openssl req $SSLEAY_CONFIG"
 CA="openssl ca $SSLEAY_CONFIG"
 VERIFY="openssl verify"
@@ -39,7 +38,6 @@ X509="openssl x509"
 
 CATOP=./demoCA
 CAKEY=./cakey.pem
-CAREQ=./careq.pem
 CACERT=./cacert.pem
 
 for i
@@ -72,7 +70,7 @@ case $i in
 	mkdir ${CATOP}/crl 
 	mkdir ${CATOP}/newcerts
 	mkdir ${CATOP}/private
-	echo "00" > ${CATOP}/serial
+	echo "01" > ${CATOP}/serial
 	touch ${CATOP}/index.txt
     fi
     if [ ! -f ${CATOP}/private/$CAKEY ]; then
@@ -85,11 +83,8 @@ case $i in
 	    RET=$?
 	else
 	    echo "Making CA certificate ..."
-	    $REQ -new -keyout ${CATOP}/private/$CAKEY \
-			   -out ${CATOP}/$CAREQ
-	    $CA -out ${CATOP}/$CACERT $CADAYS -batch \
-			   -keyfile ${CATOP}/private/$CAKEY -selfsign \
-			   -infiles ${CATOP}/$CAREQ 
+	    $REQ -new -x509 -keyout ${CATOP}/private/$CAKEY \
+			   -out ${CATOP}/$CACERT $DAYS
 	    RET=$?
 	fi
     fi

apps/apps.h

@@ -121,9 +121,7 @@
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
 #include <openssl/txt_db.h>
-#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
-#endif
 #include <openssl/ossl_typ.h>
 
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -136,6 +134,10 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
                                        * (see e_os.h).  The string is
                                        * destroyed! */
 
+#ifdef OPENSSL_NO_STDIO
+BIO_METHOD *BIO_s_file();
+#endif
+
 #ifdef OPENSSL_SYS_WIN32
 #define rename(from,to) WIN32_rename((from),(to))
 int WIN32_rename(char *oldname,char *newname);
@@ -146,10 +148,8 @@ int WIN32_rename(char *oldname,char *newname);
 #define MAIN(a,v)	main(a,v)
 
 #ifndef NON_MAIN
-CONF *config=NULL;
 BIO *bio_err=NULL;
 #else
-extern CONF *config;
 extern BIO *bio_err;
 #endif
 
@@ -162,9 +162,7 @@ extern BIO *bio_err;
 
 #endif
 
-#ifndef OPENSSL_SYS_NETWARE
 #include <signal.h>
-#endif
 
 #ifdef SIGPIPE
 #define do_pipe_sig()	signal(SIGPIPE,SIG_IGN)
@@ -177,57 +175,30 @@ extern BIO *bio_err;
 		do_pipe_sig()
 #  define apps_shutdown()
 #else
-#  ifndef OPENSSL_NO_ENGINE
-#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-     defined(OPENSSL_SYS_WIN32)
-#      ifdef _O_BINARY
-#        define apps_startup() \
-			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
-#      else
-#        define apps_startup() \
-			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
-#      endif
+#  if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+   defined(OPENSSL_SYS_WIN32)
+#    ifdef _O_BINARY
+#      define apps_startup() \
+		do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
 #    else
 #      define apps_startup() \
-			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
-			ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
-			setup_ui_method(); } while(0)
+		do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
 #    endif
-#    define apps_shutdown() \
-			do { CONF_modules_unload(1); destroy_ui_method(); \
-			EVP_cleanup(); ENGINE_cleanup(); \
-			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
-			ERR_free_strings(); } while(0)
 #  else
-#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-     defined(OPENSSL_SYS_WIN32)
-#      ifdef _O_BINARY
-#        define apps_startup() \
-			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			setup_ui_method(); } while(0)
-#      else
-#        define apps_startup() \
-			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			setup_ui_method(); } while(0)
-#      endif
-#    else
-#      define apps_startup() \
-			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
-			ERR_load_crypto_strings(); \
-			setup_ui_method(); } while(0)
-#    endif
-#    define apps_shutdown() \
-			do { CONF_modules_unload(1); destroy_ui_method(); \
-			EVP_cleanup(); \
-			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
-			ERR_free_strings(); } while(0)
+#    define apps_startup() \
+		do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+		ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
+		setup_ui_method(); } while(0)
 #  endif
+#  define apps_shutdown() \
+		do { CONF_modules_unload(1); destroy_ui_method(); \
+		EVP_cleanup(); ENGINE_cleanup(); \
+		CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+		ERR_free_strings(); } while(0)
 #endif
 
 typedef struct args_st
@@ -246,8 +217,8 @@ typedef struct pw_cb_data
 int password_callback(char *buf, int bufsiz, int verify,
 	PW_CB_DATA *cb_data);
 
-int setup_ui_method(void);
-void destroy_ui_method(void);
+int setup_ui_method();
+void destroy_ui_method();
 
 int should_retry(int i);
 int args_from_file(char *file, int *argc, char **argv[]);
@@ -266,58 +237,23 @@ int app_passwd(BIO *err, char *arg1, char *arg2, char **pass1, char **pass2);
 int add_oid_section(BIO *err, CONF *conf);
 X509 *load_cert(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
-EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
+EVP_PKEY *load_key(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *key_descrip);
-EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
+EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *key_descrip);
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
-#ifndef OPENSSL_NO_ENGINE
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
-#endif
 
 int load_config(BIO *err, CONF *cnf);
-char *make_config_name(void);
 
 /* Functions defined in ca.c and also used in ocsp.c */
 int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
 			ASN1_GENERALIZEDTIME **pinvtm, char *str);
+int make_serial_index(TXT_DB *db);
 
-#define DB_type         0
-#define DB_exp_date     1
-#define DB_rev_date     2
-#define DB_serial       3       /* index - unique */
-#define DB_file         4       
-#define DB_name         5       /* index - unique when active and not disabled */
-#define DB_NUMBER       6
-
-#define DB_TYPE_REV	'R'
-#define DB_TYPE_EXP	'E'
-#define DB_TYPE_VAL	'V'
-
-typedef struct db_attr_st
-	{
-	int unique_subject;
-	} DB_ATTR;
-typedef struct ca_db_st
-	{
-	DB_ATTR attributes;
-	TXT_DB *db;
-	} CA_DB;
-
-BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai);
-int save_serial(char *serialfile, char *suffix, BIGNUM *serial, ASN1_INTEGER **retai);
-int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix);
-CA_DB *load_index(char *dbfile, DB_ATTR *dbattr);
-int index_index(CA_DB *db);
-int save_index(char *dbfile, char *suffix, CA_DB *db);
-int rotate_index(char *dbfile, char *new_suffix, char *old_suffix);
-void free_index(CA_DB *db);
-int index_name_cmp(const char **a, const char **b);
-int parse_yesno(char *str, int def);
-
-X509_NAME *parse_name(char *str, long chtype, int multirdn);
+X509_NAME *do_subject(char *str, long chtype);
 
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1

apps/asn1pars.c

@@ -82,8 +82,6 @@
 
 int MAIN(int, char **);
 
-static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf);
-
 int MAIN(int argc, char **argv)
 	{
 	int i,badops=0,offset=0,ret=1,j;
@@ -92,7 +90,6 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL,*b64=NULL, *derout = NULL;
 	int informat,indent=0, noout = 0, dump = 0;
 	char *infile=NULL,*str=NULL,*prog,*oidfile=NULL, *derfile=NULL;
-	char *genstr=NULL, *genconf=NULL;
 	unsigned char *tmpbuf;
 	BUF_MEM *buf=NULL;
 	STACK *osk=NULL;
@@ -170,16 +167,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			sk_push(osk,*(++argv));
 			}
-		else if (strcmp(*argv,"-genstr") == 0)
-			{
-			if (--argc < 1) goto bad;
-			genstr= *(++argv);
-			}
-		else if (strcmp(*argv,"-genconf") == 0)
-			{
-			if (--argc < 1) goto bad;
-			genconf= *(++argv);
-			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -208,8 +195,6 @@ bad:
 		BIO_printf(bio_err," -strparse offset\n");
 		BIO_printf(bio_err,"               a series of these can be used to 'dig' into multiple\n");
 		BIO_printf(bio_err,"               ASN1 blob wrappings\n");
-		BIO_printf(bio_err," -genstr str   string to generate ASN1 structure from\n");
-		BIO_printf(bio_err," -genconf file file to generate ASN1 structure from\n");
 		goto end;
 		}
 
@@ -263,39 +248,25 @@ bad:
 	if ((buf=BUF_MEM_new()) == NULL) goto end;
 	if (!BUF_MEM_grow(buf,BUFSIZ*8)) goto end; /* Pre-allocate :-) */
 
-	if (genstr || genconf)
+	if (informat == FORMAT_PEM)
 		{
-		num = do_generate(bio_err, genstr, genconf, buf);
-		if (num < 0)
-			{
-			ERR_print_errors(bio_err);
+		BIO *tmp;
+
+		if ((b64=BIO_new(BIO_f_base64())) == NULL)
 			goto end;
-			}
+		BIO_push(b64,in);
+		tmp=in;
+		in=b64;
+		b64=tmp;
 		}
 
-	else
+	num=0;
+	for (;;)
 		{
-
-		if (informat == FORMAT_PEM)
-			{
-			BIO *tmp;
-
-			if ((b64=BIO_new(BIO_f_base64())) == NULL)
-				goto end;
-			BIO_push(b64,in);
-			tmp=in;
-			in=b64;
-			b64=tmp;
-			}
-
-		num=0;
-		for (;;)
-			{
-			if (!BUF_MEM_grow(buf,(int)num+BUFSIZ)) goto end;
-			i=BIO_read(in,&(buf->data[num]),BUFSIZ);
-			if (i <= 0) break;
-			num+=i;
-			}
+		if (!BUF_MEM_grow(buf,(int)num+BUFSIZ)) goto end;
+		i=BIO_read(in,&(buf->data[num]),BUFSIZ);
+		if (i <= 0) break;
+		num+=i;
 		}
 	str=buf->data;
 
@@ -333,15 +304,7 @@ bad:
 		num=tmplen;
 		}
 
-	if (offset >= num)
-		{
-		BIO_printf(bio_err, "Error: offset too large\n");
-		goto end;
-		}
-
-	num -= offset;
-
-	if ((length == 0) || ((long)length > num)) length=(unsigned int)num;
+	if (length == 0) length=(unsigned int)num;
 	if(derout) {
 		if(BIO_write(derout, str + offset, length) != (int)length) {
 			BIO_printf(bio_err, "Error writing output\n");
@@ -369,64 +332,6 @@ end:
 	if (osk != NULL) sk_free(osk);
 	OBJ_cleanup();
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
-static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf)
-	{
-	CONF *cnf = NULL;
-	int len;
-	long errline;
-	unsigned char *p;
-	ASN1_TYPE *atyp = NULL;
-
-	if (genconf)
-		{
-		cnf = NCONF_new(NULL);
-		if (!NCONF_load(cnf, genconf, &errline))
-			goto conferr;
-		if (!genstr)
-			genstr = NCONF_get_string(cnf, "default", "asn1");
-		if (!genstr)
-			{
-			BIO_printf(bio, "Can't find 'asn1' in '%s'\n", genconf);
-			goto err;
-			}
-		}
-
-	atyp = ASN1_generate_nconf(genstr, cnf);
-	NCONF_free(cnf);
-
-	if (!atyp)
-		return -1;
-
-	len = i2d_ASN1_TYPE(atyp, NULL);
-
-	if (len <= 0)
-		goto err;
-
-	if (!BUF_MEM_grow(buf,len))
-		goto err;
-
-	p=(unsigned char *)buf->data;
-
-	i2d_ASN1_TYPE(atyp, &p);
-
-	ASN1_TYPE_free(atyp);
-	return len;
-
-	conferr:
-
-	if (errline > 0)
-		BIO_printf(bio, "Error on line %ld of config file '%s'\n",
-							errline, genconf);
-	else
-		BIO_printf(bio, "Error loading config file '%s'\n", genconf);
-
-	err:
-	NCONF_free(cnf);
-	ASN1_TYPE_free(atyp);
-
-	return -1;
-
-	}

apps/ciphers.c

@@ -187,7 +187,7 @@ int MAIN(int argc, char **argv)
 			{
 			BIO_puts(STDout,SSL_CIPHER_description(
 				sk_SSL_CIPHER_value(sk,i),
-				buf,sizeof buf));
+				buf,512));
 			}
 		}
 
@@ -203,6 +203,6 @@ end:
 	if (ssl != NULL) SSL_free(ssl);
 	if (STDout != NULL) BIO_free_all(STDout);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 

apps/crl.c

@@ -81,7 +81,6 @@ static char *crl_usage[]={
 " -in arg         - input file - default stdin\n",
 " -out arg        - output file - default stdout\n",
 " -hash           - print hash value\n",
-" -fingerprint    - print the crl fingerprint\n",
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
@@ -378,7 +377,7 @@ end:
 		X509_STORE_free(store);
 	}
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static X509_CRL *load_crl(char *infile, int format)

apps/crl2p7.c

@@ -280,7 +280,7 @@ end:
 	if (crl != NULL) X509_CRL_free(crl);
 
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 /*

apps/dgst.c

@@ -73,9 +73,8 @@
 #undef PROG
 #define PROG	dgst_main
 
-int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file);
+void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
+		EVP_PKEY *key, unsigned char *sigin, int siglen);
 
 int MAIN(int, char **);
 
@@ -100,9 +99,7 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
@@ -119,7 +116,7 @@ int MAIN(int argc, char **argv)
 		goto end;
 
 	/* first check the program name */
-	program_name(argv[0],pname,sizeof pname);
+	program_name(argv[0],pname,PROG_NAME_SIZE);
 
 	md=EVP_get_digestbyname(pname);
 
@@ -168,13 +165,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			keyform=str2fmt(*(++argv));
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) break;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
 		else if (strcmp(*argv,"-binary") == 0)
@@ -212,9 +207,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
-#endif
 
 		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
@@ -234,9 +227,7 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
@@ -285,10 +276,10 @@ int MAIN(int argc, char **argv)
 	if(keyfile)
 		{
 		if (want_pub)
-			sigkey = load_pubkey(bio_err, keyfile, keyform, 0, NULL,
+			sigkey = load_pubkey(bio_err, keyfile, keyform, NULL,
 				e, "key file");
 		else
-			sigkey = load_key(bio_err, keyfile, keyform, 0, NULL,
+			sigkey = load_key(bio_err, keyfile, keyform, NULL,
 				e, "key file");
 		if (!sigkey)
 			{
@@ -328,44 +319,29 @@ int MAIN(int argc, char **argv)
 	if (argc == 0)
 		{
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-		err=do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf,
-			  siglen,"","(stdin)");
+		do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf, siglen);
 		}
 	else
 		{
 		name=OBJ_nid2sn(md->type);
 		for (i=0; i<argc; i++)
 			{
-			char *tmp,*tofree=NULL;
-			int r;
-
 			if (BIO_read_filename(in,argv[i]) <= 0)
 				{
 				perror(argv[i]);
 				err++;
 				continue;
 				}
-			if(!out_bin)
-				{
-				size_t len = strlen(name)+strlen(argv[i])+5;
-				tmp=tofree=OPENSSL_malloc(len);
-				BIO_snprintf(tmp,len,"%s(%s)= ",name,argv[i]);
-				}
-			else
-				tmp="";
-			r=do_fp(out,buf,inp,separator,out_bin,sigkey,sigbuf,
-				siglen,tmp,argv[i]);
-			if(r)
-			    err=r;
-			if(tofree)
-				OPENSSL_free(tofree);
+			if(!out_bin) BIO_printf(out, "%s(%s)= ",name,argv[i]);
+			do_fp(out, buf,inp,separator, out_bin, sigkey, 
+								sigbuf, siglen);
 			(void)BIO_reset(bmd);
 			}
 		}
 end:
 	if (buf != NULL)
 		{
-		OPENSSL_cleanse(buf,BUFSIZE);
+		memset(buf,0,BUFSIZE);
 		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
@@ -374,12 +350,11 @@ end:
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
 	apps_shutdown();
-	OPENSSL_EXIT(err);
+	EXIT(err);
 	}
 
-int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file)
+void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
+			EVP_PKEY *key, unsigned char *sigin, int siglen)
 	{
 	int len;
 	int i;
@@ -387,33 +362,21 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	for (;;)
 		{
 		i=BIO_read(bp,(char *)buf,BUFSIZE);
-		if(i < 0)
-			{
-			BIO_printf(bio_err, "Read Error in %s\n",file);
-			ERR_print_errors(bio_err);
-			return 1;
-			}
-		if (i == 0) break;
+		if (i <= 0) break;
 		}
 	if(sigin)
 		{
 		EVP_MD_CTX *ctx;
 		BIO_get_md_ctx(bp, &ctx);
 		i = EVP_VerifyFinal(ctx, sigin, (unsigned int)siglen, key); 
-		if(i > 0)
-			BIO_printf(out, "Verified OK\n");
-		else if(i == 0)
-			{
-			BIO_printf(out, "Verification Failure\n");
-			return 1;
-			}
+		if(i > 0) BIO_printf(out, "Verified OK\n");
+		else if(i == 0) BIO_printf(out, "Verification Failure\n");
 		else
 			{
 			BIO_printf(bio_err, "Error Verifying Data\n");
 			ERR_print_errors(bio_err);
-			return 1;
 			}
-		return 0;
+		return;
 		}
 	if(key)
 		{
@@ -423,7 +386,7 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			{
 			BIO_printf(bio_err, "Error Signing Data\n");
 			ERR_print_errors(bio_err);
-			return 1;
+			return;
 			}
 		}
 	else
@@ -432,7 +395,6 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	if(binout) BIO_write(out, buf, len);
 	else 
 		{
-		BIO_write(out,title,strlen(title));
 		for (i=0; i<len; i++)
 			{
 			if (sep && (i != 0))
@@ -441,6 +403,5 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			}
 		BIO_printf(out, "\n");
 		}
-	return 0;
 	}
 

apps/dh.c

@@ -87,17 +87,12 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine;
-#endif
+	char *infile,*outfile,*prog,*engine;
 
 	apps_startup();
 
@@ -108,9 +103,7 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;
 
-#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
-#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -141,13 +134,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -179,17 +170,13 @@ bad:
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -346,6 +333,6 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #endif

apps/dhparam.c

@@ -142,15 +142,13 @@
  * -C
  */
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dh_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef OPENSSL_NO_DSA
@@ -159,10 +157,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
-	char *inrand=NULL;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine=NULL;
-#endif
+	char *inrand=NULL,*engine=NULL;
 	int num = 0, g = 0;
 
 	apps_startup();
@@ -204,13 +199,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -256,9 +249,7 @@ bad:
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
 		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"               the random number generator\n");
@@ -268,9 +259,7 @@ bad:
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if (g && !num)
 		num = DEFBITS;
@@ -294,8 +283,6 @@ bad:
 
 	if(num) {
 
-		BN_GENCB cb;
-		BN_GENCB_set(&cb, dh_cb, bio_err);
 		if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
 			{
 			BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
@@ -307,13 +294,12 @@ bad:
 #ifndef OPENSSL_NO_DSA
 		if (dsaparam)
 			{
-			DSA *dsa = DSA_new();
+			DSA *dsa;
 			
 			BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
-			if(!dsa || !DSA_generate_parameters_ex(dsa, num,
-						NULL, 0, NULL, NULL, &cb))
+			dsa = DSA_generate_parameters(num, NULL, 0, NULL, NULL, dh_cb, bio_err);
+			if (dsa == NULL)
 				{
-				if(dsa) DSA_free(dsa);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -329,12 +315,12 @@ bad:
 		else
 #endif
 			{
-			dh = DH_new();
 			BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 			BIO_printf(bio_err,"This is going to take a long time\n");
-			if(!dh || !DH_generate_parameters_ex(dh, num, g, &cb))
+			dh=DH_generate_parameters(num,g,dh_cb,bio_err);
+			
+			if (dh == NULL)
 				{
-				if(dh) DH_free(dh);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -533,11 +519,11 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -545,12 +531,11 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
 
 #endif

apps/dsa.c

@@ -90,9 +90,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -100,10 +98,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
 	int pubin = 0, pubout = 0;
-	char *infile,*outfile,*prog;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine;
-#endif
+	char *infile,*outfile,*prog,*engine;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
@@ -117,9 +112,7 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;
 
-#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
-#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -160,13 +153,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -198,9 +189,7 @@ bad:
 		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err," -out arg        output file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
@@ -218,9 +207,7 @@ bad:
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -327,6 +314,6 @@ end:
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #endif

apps/dsaparam.c

@@ -56,12 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #ifndef OPENSSL_NO_DSA
 #include <assert.h>
 #include <stdio.h>
@@ -88,31 +82,15 @@
  * -C
  * -noout
  * -genkey
- *  #ifdef GENCB_TEST
- * -timebomb n  - interrupt keygen after <n> seconds
- *  #endif
  */
 
-#ifdef GENCB_TEST
-
-static int stop_keygen_flag = 0;
-
-static void timebomb_sigalarm(int foo)
-	{
-	stop_keygen_flag = 1;
-	}
-
-#endif
-
-static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dsa_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -120,12 +98,7 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog,*inrand=NULL;
 	int numbits= -1,num,genkey=0;
 	int need_rand=0;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
-#ifdef GENCB_TEST
-	int timebomb=0;
-#endif
 
 	apps_startup();
 
@@ -166,20 +139,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if(strcmp(*argv, "-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine = *(++argv);
 			}
-#endif
-#ifdef GENCB_TEST
-		else if(strcmp(*argv, "-timebomb") == 0)
-			{
-			if (--argc < 1) goto bad;
-			timebomb = atoi(*(++argv));
-			}
-#endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
 		else if (strcmp(*argv,"-C") == 0)
@@ -227,12 +191,7 @@ bad:
 		BIO_printf(bio_err," -noout        no output\n");
 		BIO_printf(bio_err," -genkey       generate a DSA key\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
-#ifdef GENCB_TEST
-		BIO_printf(bio_err," -timebomb n   interrupt keygen after <n> seconds\n");
-#endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
 		}
@@ -276,9 +235,7 @@ bad:
 			}
 		}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if (need_rand)
 		{
@@ -290,47 +247,10 @@ bad:
 
 	if (numbits > 0)
 		{
-		BN_GENCB cb;
-		BN_GENCB_set(&cb, dsa_cb, bio_err);
 		assert(need_rand);
-		dsa = DSA_new();
-		if(!dsa)
-			{
-			BIO_printf(bio_err,"Error allocating DSA object\n");
-			goto end;
-			}
 		BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
 	        BIO_printf(bio_err,"This could take some time\n");
-#ifdef GENCB_TEST
-		if(timebomb > 0)
-	{
-		struct sigaction act;
-		act.sa_handler = timebomb_sigalarm;
-		act.sa_flags = 0;
-		BIO_printf(bio_err,"(though I'll stop it if not done within %d secs)\n",
-				timebomb);
-		if(sigaction(SIGALRM, &act, NULL) != 0)
-			{
-			BIO_printf(bio_err,"Error, couldn't set SIGALRM handler\n");
-			goto end;
-			}
-		alarm(timebomb);
-	}
-#endif
-	        if(!DSA_generate_parameters_ex(dsa,num,NULL,0,NULL,NULL, &cb))
-			{
-#ifdef GENCB_TEST
-			if(stop_keygen_flag)
-				{
-				BIO_printf(bio_err,"DSA key generation time-stopped\n");
-				/* This is an asked-for behaviour! */
-				ret = 0;
-				goto end;
-				}
-#endif
-			BIO_printf(bio_err,"Error, DSA key generation failed\n");
-			goto end;
-			}
+	        dsa=DSA_generate_parameters(num,NULL,0,NULL,NULL, dsa_cb,bio_err);
 		}
 	else if	(informat == FORMAT_ASN1)
 		dsa=d2i_DSAparams_bio(in,NULL);
@@ -452,10 +372,10 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
-static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -463,15 +383,10 @@ static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write(arg,&c,1);
+	(void)BIO_flush(arg);
 #ifdef LINT
 	p=n;
 #endif
-#ifdef GENCB_TEST
-	if(stop_keygen_flag)
-		return 0;
-#endif
-	return 1;
 	}
 #endif

apps/ec.c

@@ -1,395 +0,0 @@
-/* apps/ec.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef OPENSSL_NO_EC
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/bio.h>
-#include <openssl/err.h>
-#include <openssl/evp.h>
-#include <openssl/pem.h>
-
-#undef PROG
-#define PROG	ec_main
-
-/* -inform arg    - input format - default PEM (one of DER, NET or PEM)
- * -outform arg   - output format - default PEM
- * -in arg        - input file - default stdin
- * -out arg       - output file - default stdout
- * -des           - encrypt output if PEM format with DES in cbc mode
- * -text          - print a text version
- * -param_out     - print the elliptic curve parameters
- * -conv_form arg - specifies the point encoding form
- * -param_enc arg - specifies the parameter encoding
- */
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-{
-	ENGINE 	*e = NULL;
-	int 	ret = 1;
-	EC_KEY 	*eckey = NULL;
-	int 	i, badops = 0;
-	const EVP_CIPHER *enc = NULL;
-	BIO 	*in = NULL, *out = NULL;
-	int 	informat, outformat, text=0, noout=0;
-	int  	pubin = 0, pubout = 0, param_out = 0;
-	char 	*infile, *outfile, *prog, *engine;
-	char 	*passargin = NULL, *passargout = NULL;
-	char 	*passin = NULL, *passout = NULL;
-	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED;
-	int	new_form = 0;
-	int	asn1_flag = OPENSSL_EC_NAMED_CURVE;
-	int 	new_asn1_flag = 0;
-
-	apps_startup();
-
-	if (bio_err == NULL)
-		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
-			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	engine = NULL;
-	infile = NULL;
-	outfile = NULL;
-	informat = FORMAT_PEM;
-	outformat = FORMAT_PEM;
-
-	prog = argv[0];
-	argc--;
-	argv++;
-	while (argc >= 1)
-		{
-		if (strcmp(*argv,"-inform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			informat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-outform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outformat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-in") == 0)
-			{
-			if (--argc < 1) goto bad;
-			infile= *(++argv);
-			}
-		else if (strcmp(*argv,"-out") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-passin") == 0)
-			{
-			if (--argc < 1) goto bad;
-			passargin= *(++argv);
-			}
-		else if (strcmp(*argv,"-passout") == 0)
-			{
-			if (--argc < 1) goto bad;
-			passargout= *(++argv);
-			}
-		else if (strcmp(*argv, "-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
-		else if (strcmp(*argv, "-noout") == 0)
-			noout = 1;
-		else if (strcmp(*argv, "-text") == 0)
-			text = 1;
-		else if (strcmp(*argv, "-conv_form") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_form = 1;
-			if (strcmp(*argv, "compressed") == 0)
-				form = POINT_CONVERSION_COMPRESSED;
-			else if (strcmp(*argv, "uncompressed") == 0)
-				form = POINT_CONVERSION_UNCOMPRESSED;
-			else if (strcmp(*argv, "hybrid") == 0)
-				form = POINT_CONVERSION_HYBRID;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-param_enc") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_asn1_flag = 1;
-			if (strcmp(*argv, "named_curve") == 0)
-				asn1_flag = OPENSSL_EC_NAMED_CURVE;
-			else if (strcmp(*argv, "explicit") == 0)
-				asn1_flag = 0;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-param_out") == 0)
-			param_out = 1;
-		else if (strcmp(*argv, "-pubin") == 0)
-			pubin=1;
-		else if (strcmp(*argv, "-pubout") == 0)
-			pubout=1;
-		else if ((enc=EVP_get_cipherbyname(&(argv[0][1]))) == NULL)
-			{
-			BIO_printf(bio_err, "unknown option %s\n", *argv);
-			badops=1;
-			break;
-			}
-		argc--;
-		argv++;
-		}
-
-	if (badops)
-		{
-bad:
-		BIO_printf(bio_err, "%s [options] <infile >outfile\n", prog);
-		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, " -inform arg     input format - "
-				"DER or PEM\n");
-		BIO_printf(bio_err, " -outform arg    output format - "
-				"DER or PEM\n");
-		BIO_printf(bio_err, " -in arg         input file\n");
-		BIO_printf(bio_err, " -passin arg     input file pass "
-				"phrase source\n");
-		BIO_printf(bio_err, " -out arg        output file\n");
-		BIO_printf(bio_err, " -passout arg    output file pass "
-				"phrase source\n");
-		BIO_printf(bio_err, " -engine e       use engine e, "
-				"possibly a hardware device.\n");
-		BIO_printf(bio_err, " -des            encrypt PEM output, "
-				"instead of 'des' every other \n"
-				"                 cipher "
-				"supported by OpenSSL can be used\n");
-		BIO_printf(bio_err, " -text           print the key\n");
-		BIO_printf(bio_err, " -noout          don't print key out\n");
-		BIO_printf(bio_err, " -param_out      print the elliptic "
-				"curve parameters\n");
-		BIO_printf(bio_err, " -conv_form arg  specifies the "
-				"point conversion form \n");
-		BIO_printf(bio_err, "                 possible values:"
-				" compressed\n");
-		BIO_printf(bio_err, "                                 "
-				" uncompressed (default)\n");
-		BIO_printf(bio_err, "                                  "
-				" hybrid\n");
-		BIO_printf(bio_err, " -param_enc arg  specifies the way"
-				" the ec parameters are encoded\n");
-		BIO_printf(bio_err, "                 in the asn1 der "
-				"encoding\n");
-		BIO_printf(bio_err, "                 possilbe values:"
-				" named_curve (default)\n");
-		BIO_printf(bio_err,"                                  "
-				"explicit\n");
-		goto end;
-		}
-
-	ERR_load_crypto_strings();
-
-        e = setup_engine(bio_err, engine, 0);
-
-	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) 
-		{
-		BIO_printf(bio_err, "Error getting passwords\n");
-		goto end;
-		}
-
-	in = BIO_new(BIO_s_file());
-	out = BIO_new(BIO_s_file());
-	if ((in == NULL) || (out == NULL))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (infile == NULL)
-		BIO_set_fp(in, stdin, BIO_NOCLOSE);
-	else
-		{
-		if (BIO_read_filename(in, infile) <= 0)
-			{
-			perror(infile);
-			goto end;
-			}
-		}
-
-	BIO_printf(bio_err, "read EC key\n");
-	if (informat == FORMAT_ASN1) 
-		{
-		if (pubin) 
-			eckey = d2i_EC_PUBKEY_bio(in, NULL);
-		else 
-			eckey = d2i_ECPrivateKey_bio(in, NULL);
-		} 
-	else if (informat == FORMAT_PEM) 
-		{
-		if (pubin) 
-			eckey = PEM_read_bio_EC_PUBKEY(in, NULL, NULL, 
-				NULL);
-		else 
-			eckey = PEM_read_bio_ECPrivateKey(in, NULL, NULL,
-				passin);
-		} 
-	else
-		{
-		BIO_printf(bio_err, "bad input format specified for key\n");
-		goto end;
-		}
-	if (eckey == NULL)
-		{
-		BIO_printf(bio_err,"unable to load Key\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (outfile == NULL)
-		{
-		BIO_set_fp(out, stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
-		}
-	else
-		{
-		if (BIO_write_filename(out, outfile) <= 0)
-			{
-			perror(outfile);
-			goto end;
-			}
-		}
-
-	if (new_form)
-		{
-		EC_GROUP_set_point_conversion_form(eckey->group, form);
-		eckey->conv_form = form;
-		}
-
-	if (new_asn1_flag)
-		EC_GROUP_set_asn1_flag(eckey->group, asn1_flag);
-
-	if (text) 
-		if (!EC_KEY_print(out, eckey, 0))
-			{
-			perror(outfile);
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-
-	if (noout) 
-		goto end;
-
-	BIO_printf(bio_err, "writing EC key\n");
-	if (outformat == FORMAT_ASN1) 
-		{
-		if (param_out)
-			i = i2d_ECPKParameters_bio(out, eckey->group);
-		else if (pubin || pubout) 
-			i = i2d_EC_PUBKEY_bio(out, eckey);
-		else 
-			i = i2d_ECPrivateKey_bio(out, eckey);
-		} 
-	else if (outformat == FORMAT_PEM) 
-		{
-		if (param_out)
-			i = PEM_write_bio_ECPKParameters(out, eckey->group);
-		else if (pubin || pubout)
-			i = PEM_write_bio_EC_PUBKEY(out, eckey);
-		else 
-			i = PEM_write_bio_ECPrivateKey(out, eckey, enc,
-						NULL, 0, NULL, passout);
-		} 
-	else 
-		{
-		BIO_printf(bio_err, "bad output format specified for "
-			"outfile\n");
-		goto end;
-		}
-
-	if (!i)
-		{
-		BIO_printf(bio_err, "unable to write private key\n");
-		ERR_print_errors(bio_err);
-		}
-	else
-		ret=0;
-end:
-	if (in)
-		BIO_free(in);
-	if (out)
-		BIO_free_all(out);
-	if (eckey)
-		EC_KEY_free(eckey);
-	if (passin)
-		OPENSSL_free(passin);
-	if (passout)
-		OPENSSL_free(passout);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
-}
-#endif

apps/ecparam.c

@@ -1,728 +0,0 @@
-/* apps/ecparam.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by 
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-#ifndef OPENSSL_NO_EC
-#include <assert.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <time.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/bio.h>
-#include <openssl/err.h>
-#include <openssl/bn.h>
-#include <openssl/ec.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-
-#undef PROG
-#define PROG	ecparam_main
-
-/* -inform arg      - input format - default PEM (DER or PEM)
- * -outform arg     - output format - default PEM
- * -in  arg         - input file  - default stdin
- * -out arg         - output file - default stdout
- * -noout           - do not print the ec parameter
- * -text            - print the ec parameters in text form
- * -check           - validate the ec parameters
- * -C               - print a 'C' function creating the parameters
- * -name arg        - use the ec parameters with 'short name' name
- * -list_curves     - prints a list of all currently available curve 'short names'
- * -conv_form arg   - specifies the point conversion form 
- *                  - possible values: compressed
- *                                     uncompressed (default)
- *                                     hybrid
- * -param_enc arg   - specifies the way the ec parameters are encoded
- *                    in the asn1 der encoding
- *                    possible values: named_curve (default)
- *                                     explicit
- * -no_seed         - if 'explicit' parameters are choosen do not use the seed
- * -genkey          - generate ec key
- * -rand file       - files to use for random number input
- * -engine e        - use engine e, possibly a hardware device
- */
-
-
-static int ecparam_print_var(BIO *,BIGNUM *,const char *,int,unsigned char *);
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-	{
-	EC_GROUP *group = NULL;
-	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED; 
-	int 	new_form = 0;
-	int 	asn1_flag = OPENSSL_EC_NAMED_CURVE;
-	int 	new_asn1_flag = 0;
-	char 	*curve_name = NULL, *inrand = NULL;
-	int	list_curves = 0, no_seed = 0, check = 0,
-		badops = 0, text = 0, i, need_rand = 0, genkey = 0;
-	char	*infile = NULL, *outfile = NULL, *prog;
-	BIO 	*in = NULL, *out = NULL;
-	int 	informat, outformat, noout = 0, C = 0, ret = 1;
-	ENGINE	*e = NULL;
-	char	*engine = NULL;
-
-	BIGNUM	*ec_p = NULL, *ec_a = NULL, *ec_b = NULL,
-		*ec_gen = NULL, *ec_order = NULL, *ec_cofactor = NULL;
-	unsigned char *buffer = NULL;
-
-	apps_startup();
-
-	if (bio_err == NULL)
-		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
-			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	informat=FORMAT_PEM;
-	outformat=FORMAT_PEM;
-
-	prog=argv[0];
-	argc--;
-	argv++;
-	while (argc >= 1)
-		{
-		if 	(strcmp(*argv,"-inform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			informat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-outform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outformat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-in") == 0)
-			{
-			if (--argc < 1) goto bad;
-			infile= *(++argv);
-			}
-		else if (strcmp(*argv,"-out") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-text") == 0)
-			text = 1;
-		else if (strcmp(*argv,"-C") == 0)
-			C = 1;
-		else if (strcmp(*argv,"-check") == 0)
-			check = 1;
-		else if (strcmp (*argv, "-name") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			curve_name = *(++argv);
-			}
-		else if (strcmp(*argv, "-list_curves") == 0)
-			list_curves = 1;
-		else if (strcmp(*argv, "-conv_form") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_form = 1;
-			if (strcmp(*argv, "compressed") == 0)
-				form = POINT_CONVERSION_COMPRESSED;
-			else if (strcmp(*argv, "uncompressed") == 0)
-				form = POINT_CONVERSION_UNCOMPRESSED;
-			else if (strcmp(*argv, "hybrid") == 0)
-				form = POINT_CONVERSION_HYBRID;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-param_enc") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_asn1_flag = 1;
-			if (strcmp(*argv, "named_curve") == 0)
-				asn1_flag = OPENSSL_EC_NAMED_CURVE;
-			else if (strcmp(*argv, "explicit") == 0)
-				asn1_flag = 0;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-no_seed") == 0)
-			no_seed = 1;
-		else if (strcmp(*argv, "-noout") == 0)
-			noout=1;
-		else if (strcmp(*argv,"-genkey") == 0)
-			{
-			genkey=1;
-			need_rand=1;
-			}
-		else if (strcmp(*argv, "-rand") == 0)
-			{
-			if (--argc < 1) goto bad;
-			inrand= *(++argv);
-			need_rand=1;
-			}
-		else if(strcmp(*argv, "-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine = *(++argv);
-			}	
-		else
-			{
-			BIO_printf(bio_err,"unknown option %s\n",*argv);
-			badops=1;
-			break;
-			}
-		argc--;
-		argv++;
-		}
-
-	if (badops)
-		{
-bad:
-		BIO_printf(bio_err, "%s [options] <infile >outfile\n",prog);
-		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, " -inform arg       input format - "
-				"default PEM (DER or PEM)\n");
-		BIO_printf(bio_err, " -outform arg      output format - "
-				"default PEM\n");
-		BIO_printf(bio_err, " -in  arg          input file  - "
-				"default stdin\n");
-		BIO_printf(bio_err, " -out arg          output file - "
-				"default stdout\n");
-		BIO_printf(bio_err, " -noout            do not print the "
-				"ec parameter\n");
-		BIO_printf(bio_err, " -text             print the ec "
-				"parameters in text form\n");
-		BIO_printf(bio_err, " -check            validate the ec "
-				"parameters\n");
-		BIO_printf(bio_err, " -C                print a 'C' "
-				"function creating the parameters\n");
-		BIO_printf(bio_err, " -name arg         use the "
-				"ec parameters with 'short name' name\n");
-		BIO_printf(bio_err, " -list_curves      prints a list of "
-				"all currently available curve 'short names'\n");
-		BIO_printf(bio_err, " -conv_form arg    specifies the "
-				"point conversion form \n");
-		BIO_printf(bio_err, "                   possible values:"
-				" compressed\n");
-		BIO_printf(bio_err, "                                   "
-				" uncompressed (default)\n");
-		BIO_printf(bio_err, "                                   "
-				" hybrid\n");
-		BIO_printf(bio_err, " -param_enc arg    specifies the way"
-				" the ec parameters are encoded\n");
-		BIO_printf(bio_err, "                   in the asn1 der "
-				"encoding\n");
-		BIO_printf(bio_err, "                   possible values:"
-				" named_curve (default)\n");
-		BIO_printf(bio_err, "                                   "
-				" explicit\n");
-		BIO_printf(bio_err, " -no_seed          if 'explicit'"
-				" parameters are choosen do not"
-				" use the seed\n");
-		BIO_printf(bio_err, " -genkey           generate ec"
-				" key\n");
-		BIO_printf(bio_err, " -rand file        files to use for"
-				" random number input\n");
-		BIO_printf(bio_err, " -engine e         use engine e, "
-				"possibly a hardware device\n");
-		goto end;
-		}
-
-	ERR_load_crypto_strings();
-
-	in=BIO_new(BIO_s_file());
-	out=BIO_new(BIO_s_file());
-	if ((in == NULL) || (out == NULL))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (infile == NULL)
-		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-	else
-		{
-		if (BIO_read_filename(in,infile) <= 0)
-			{
-			perror(infile);
-			goto end;
-			}
-		}
-	if (outfile == NULL)
-		{
-		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
-	else
-		{
-		if (BIO_write_filename(out,outfile) <= 0)
-			{
-			perror(outfile);
-			goto end;
-			}
-		}
-
-	e = setup_engine(bio_err, engine, 0);
-
-	if (list_curves)
-		{
-		EC_builtin_curve *curves = NULL;
-		size_t crv_len = 0;
-		size_t n = 0;
-		size_t len;
-
-		crv_len = EC_get_builtin_curves(NULL, 0);
-
-		curves = OPENSSL_malloc(sizeof(EC_builtin_curve) * crv_len);
-
-		if (curves == NULL)
-			goto end;
-
-		if (!EC_get_builtin_curves(curves, crv_len))
-			{
-			OPENSSL_free(curves);
-			goto end;
-			}
-
-		
-		for (n = 0; n < crv_len; n++)
-			{
-			const char *comment;
-			const char *sname;
-			comment = curves[n].comment;
-			sname   = OBJ_nid2sn(curves[n].nid);
-			if (comment == NULL)
-				comment = "CURVE DESCRIPTION NOT AVAILABLE";
-			if (sname == NULL)
-				sname = "";
-
-			len = BIO_printf(out, "  %-10s: ", sname);
-			if (len + strlen(comment) > 80)
-				BIO_printf(out, "\n%80s\n", comment);
-			else
-				BIO_printf(out, "%s\n", comment);
-			} 
-
-		OPENSSL_free(curves);
-		ret = 0;
-		goto end;
-		}
-
-	if (curve_name != NULL)
-		{
-		int nid;
-
-		/* workaround for the SECG curve names secp192r1
-		 * and secp256r1 (which are the same as the curves
-		 * prime192v1 and prime256v1 defined in X9.62)
-		 */
-		if (!strcmp(curve_name, "secp192r1"))
-			{
-			BIO_printf(bio_err, "using curve name prime192v1 "
-				"instead of secp192r1\n");
-			nid = NID_X9_62_prime192v1;
-			}
-		else if (!strcmp(curve_name, "secp256r1"))
-			{
-			BIO_printf(bio_err, "using curve name prime256v1 "
-				"instead of secp256r1\n");
-			nid = NID_X9_62_prime256v1;
-			}
-		else
-			nid = OBJ_sn2nid(curve_name);
-	
-		if (nid == 0)
-			{
-			BIO_printf(bio_err, "unknown curve name (%s)\n", 
-				curve_name);
-			goto end;
-			}
-
-		group = EC_GROUP_new_by_nid(nid);
-		if (group == NULL)
-			{
-			BIO_printf(bio_err, "unable to create curve (%s)\n", 
-				curve_name);
-			goto end;
-			}
-		EC_GROUP_set_asn1_flag(group, asn1_flag);
-		EC_GROUP_set_point_conversion_form(group, form);
-		}
-	else if (informat == FORMAT_ASN1)
-		{
-		group = d2i_ECPKParameters_bio(in, NULL);
-		}
-	else if (informat == FORMAT_PEM)
-		{
-		group = PEM_read_bio_ECPKParameters(in,NULL,NULL,NULL);
-		}
-	else
-		{
-		BIO_printf(bio_err, "bad input format specified\n");
-		goto end;
-		}
-
-	if (group == NULL)
-		{
-		BIO_printf(bio_err, 
-			"unable to load elliptic curve parameters\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (new_form)
-		EC_GROUP_set_point_conversion_form(group, form);
-
-	if (new_asn1_flag)
-		EC_GROUP_set_asn1_flag(group, asn1_flag);
-
-	if (no_seed)
-		{
-		EC_GROUP_set_seed(group, NULL, 0);
-		}
-
-	if (text)
-		{
-		if (!ECPKParameters_print(out, group, 0))
-			goto end;
-		}
-
-	if (check)
-		{
-		if (group == NULL)
-			BIO_printf(bio_err, "no elliptic curve parameters\n");
-		BIO_printf(bio_err, "checking elliptic curve parameters: ");
-		if (!EC_GROUP_check(group, NULL))
-			{
-			BIO_printf(bio_err, "failed\n");
-			ERR_print_errors(bio_err);
-			}
-		else
-			BIO_printf(bio_err, "ok\n");
-			
-		}
-
-	if (C)
-		{
-		size_t	buf_len = 0, tmp_len = 0;
-		const EC_POINT *point;
-		int	is_prime, len = 0;
-		const EC_METHOD *meth = EC_GROUP_method_of(group);
-
-		if ((ec_p = BN_new()) == NULL || (ec_a = BN_new()) == NULL ||
-		    (ec_b = BN_new()) == NULL || (ec_gen = BN_new()) == NULL ||
-		    (ec_order = BN_new()) == NULL || 
-		    (ec_cofactor = BN_new()) == NULL )
-			{
-			perror("OPENSSL_malloc");
-			goto end;
-			}
-
-		is_prime = (EC_METHOD_get_field_type(meth) == 
-			NID_X9_62_prime_field);
-
-		if (is_prime)
-			{
-			if (!EC_GROUP_get_curve_GFp(group, ec_p, ec_a,
-				ec_b, NULL))
-				goto end;
-			}
-		else
-			{
-			/* TODO */
-			goto end;
-			}
-
-		if ((point = EC_GROUP_get0_generator(group)) == NULL)
-			goto end;
-		if (!EC_POINT_point2bn(group, point, 
-			EC_GROUP_get_point_conversion_form(group), ec_gen, 
-			NULL))
-			goto end;
-		if (!EC_GROUP_get_order(group, ec_order, NULL))
-			goto end;
-		if (!EC_GROUP_get_cofactor(group, ec_cofactor, NULL))
-			goto end;
-
-		if (!ec_p || !ec_a || !ec_b || !ec_gen || 
-			!ec_order || !ec_cofactor)
-			goto end;
-
-		len = BN_num_bits(ec_order);
-
-		if ((tmp_len = (size_t)BN_num_bytes(ec_p)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_a)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_b)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_gen)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_order)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_cofactor)) > buf_len)
-			buf_len = tmp_len;
-
-		buffer = (unsigned char *)OPENSSL_malloc(buf_len);
-
-		if (buffer == NULL)
-			{
-			perror("OPENSSL_malloc");
-			goto end;
-			}
-
-		ecparam_print_var(out, ec_p, "ec_p", len, buffer);
-		ecparam_print_var(out, ec_a, "ec_a", len, buffer);
-		ecparam_print_var(out, ec_b, "ec_b", len, buffer);
-		ecparam_print_var(out, ec_gen, "ec_gen", len, buffer);
-		ecparam_print_var(out, ec_order, "ec_order", len, buffer);
-		ecparam_print_var(out, ec_cofactor, "ec_cofactor", len, 
-			buffer);
-
-		BIO_printf(out, "\n\n");
-
-		BIO_printf(out, "EC_GROUP *get_ec_group_%d(void)\n\t{\n", len);
-		BIO_printf(out, "\tint ok=0;\n");
-		BIO_printf(out, "\tEC_GROUP *group = NULL;\n");
-		BIO_printf(out, "\tEC_POINT *point = NULL;\n");
-		BIO_printf(out, "\tBIGNUM   *tmp_1 = NULL, *tmp_2 = NULL, "
-				"*tmp_3 = NULL;\n\n");
-		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_p_%d, "
-				"sizeof(ec_p_%d), NULL)) == NULL)\n\t\t"
-				"goto err;\n", len, len);
-		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_a_%d, "
-				"sizeof(ec_a_%d), NULL)) == NULL)\n\t\t"
-				"goto err;\n", len, len);
-		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_b_%d, "
-				"sizeof(ec_b_%d), NULL)) == NULL)\n\t\t"
-				"goto err;\n", len, len);
-		if (is_prime)
-			{
-			BIO_printf(out, "\tif ((group = EC_GROUP_new_curve_"
-				"GFp(tmp_1, tmp_2, tmp_3, NULL)) == NULL)"
-				"\n\t\tgoto err;\n\n");
-			}
-		else
-			{
-			/* TODO */
-			goto end;
-			}
-		BIO_printf(out, "\t/* build generator */\n");
-		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_gen_%d, "
-				"sizeof(ec_gen_%d), tmp_1)) == NULL)"
-				"\n\t\tgoto err;\n", len, len);
-		BIO_printf(out, "\tpoint = EC_POINT_bn2point(group, tmp_1, "
-				"NULL, NULL);\n");
-		BIO_printf(out, "\tif (point == NULL)\n\t\tgoto err;\n");
-		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_order_%d, "
-				"sizeof(ec_order_%d), tmp_2)) == NULL)"
-				"\n\t\tgoto err;\n", len, len);
-		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_cofactor_%d, "
-				"sizeof(ec_cofactor_%d), tmp_3)) == NULL)"
-				"\n\t\tgoto err;\n", len, len);
-		BIO_printf(out, "\tif (!EC_GROUP_set_generator(group, point,"
-				" tmp_2, tmp_3))\n\t\tgoto err;\n");
-		BIO_printf(out, "\n\tok=1;\n");
-		BIO_printf(out, "err:\n");
-		BIO_printf(out, "\tif (tmp_1)\n\t\tBN_free(tmp_1);\n");
-		BIO_printf(out, "\tif (tmp_2)\n\t\tBN_free(tmp_2);\n");
-		BIO_printf(out, "\tif (tmp_3)\n\t\tBN_free(tmp_3);\n");
-		BIO_printf(out, "\tif (point)\n\t\tEC_POINT_free(point);\n");
-		BIO_printf(out, "\tif (!ok)\n");
-		BIO_printf(out, "\t\t{\n");
-		BIO_printf(out, "\t\tEC_GROUP_free(group);\n");
-		BIO_printf(out, "\t\tgroup = NULL;\n");
-		BIO_printf(out, "\t\t}\n");
-		BIO_printf(out, "\treturn(group);\n\t}\n");
-	}
-
-	if (!noout)
-		{
-		if (outformat == FORMAT_ASN1)
-			i = i2d_ECPKParameters_bio(out, group);
-		else if (outformat == FORMAT_PEM)
-			i = PEM_write_bio_ECPKParameters(out, group);
-		else	
-			{
-			BIO_printf(bio_err,"bad output format specified for"
-				" outfile\n");
-			goto end;
-			}
-		if (!i)
-			{
-			BIO_printf(bio_err, "unable to write elliptic "
-				"curve parameters\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		}
-	
-	if (need_rand)
-		{
-		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
-		if (inrand != NULL)
-			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
-				app_RAND_load_files(inrand));
-		}
-
-	if (genkey)
-		{
-		EC_KEY *eckey = EC_KEY_new();
-
-		if (eckey == NULL)
-			goto end;
-
-		assert(need_rand);
-
-		eckey->group = group;
-		
-		if (!EC_KEY_generate_key(eckey))
-			{
-			eckey->group = NULL;
-			EC_KEY_free(eckey);
-			goto end;
-			}
-		if (outformat == FORMAT_ASN1)
-			i = i2d_ECPrivateKey_bio(out, eckey);
-		else if (outformat == FORMAT_PEM)
-			i = PEM_write_bio_ECPrivateKey(out, eckey, NULL,
-				NULL, 0, NULL, NULL);
-		else	
-			{
-			BIO_printf(bio_err, "bad output format specified "
-				"for outfile\n");
-			eckey->group = NULL;
-			EC_KEY_free(eckey);
-			goto end;
-			}
-		eckey->group = NULL;
-		EC_KEY_free(eckey);
-		}
-
-	if (need_rand)
-		app_RAND_write_file(NULL, bio_err);
-
-	ret=0;
-end:
-	if (ec_p)
-		BN_free(ec_p);
-	if (ec_a)
-		BN_free(ec_a);
-	if (ec_b)
-		BN_free(ec_b);
-	if (ec_gen)
-		BN_free(ec_gen);
-	if (ec_order)
-		BN_free(ec_order);
-	if (ec_cofactor)
-		BN_free(ec_cofactor);
-	if (buffer)
-		OPENSSL_free(buffer);
-	if (in != NULL)
-		BIO_free(in);
-	if (out != NULL)
-		BIO_free_all(out);
-	if (group != NULL)
-		EC_GROUP_free(group);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
-}
-
-static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
-	int len, unsigned char *buffer)
-	{
-	BIO_printf(out, "static unsigned char %s_%d[] = {", var, len);
-	if (BN_is_zero(in))
-		BIO_printf(out, "\n\t0x00");
-	else 
-		{
-		int i, l;
-
-		l = BN_bn2bin(in, buffer);
-		for (i=0; i<l-1; i++)
-			{
-			if ((i%12) == 0) 
-				BIO_printf(out, "\n\t");
-			BIO_printf(out, "0x%02X,", buffer[i]);
-			}
-		if ((i%12) == 0) 
-			BIO_printf(out, "\n\t");
-		BIO_printf(out, "0x%02X", buffer[i]);
-		}
-	BIO_printf(out, "\n\t};\n\n");
-	return 1;
-	}
-#endif

apps/enc.c

@@ -78,7 +78,7 @@ int set_hex(char *in,unsigned char *out,int size);
 #define BSIZE	(8*1024)
 #define	PROG	enc_main
 
-static void show_ciphers(const OBJ_NAME *name,void *bio_)
+void show_ciphers(const OBJ_NAME *name,void *bio_)
 	{
 	BIO *bio=bio_;
 	static int n;
@@ -100,11 +100,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	static const char magic[]="Salted__";
-	char mbuf[sizeof magic-1];
+	char mbuf[8];	/* should be 1 smaller than magic */
 	char *strbuf=NULL;
 	unsigned char *buff=NULL,*bufsize=NULL;
 	int bsize=BSIZE,verbose=0;
@@ -121,9 +119,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
 #define PROG_NAME_SIZE  39
 	char pname[PROG_NAME_SIZE+1];
-#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
-#endif
 
 	apps_startup();
 
@@ -135,7 +131,7 @@ int MAIN(int argc, char **argv)
 		goto end;
 
 	/* first check the program name */
-	program_name(argv[0],pname,sizeof pname);
+	program_name(argv[0],pname,PROG_NAME_SIZE);
 	if (strcmp(pname,"base64") == 0)
 		base64=1;
 
@@ -167,13 +163,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passarg= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
@@ -222,7 +216,7 @@ int MAIN(int argc, char **argv)
 				goto bad;
 				}
 			buf[0]='\0';
-			fgets(buf,sizeof buf,infile);
+			fgets(buf,128,infile);
 			fclose(infile);
 			i=strlen(buf);
 			if ((i > 0) &&
@@ -276,9 +270,7 @@ bad:
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
-#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
-#endif
 
 			BIO_printf(bio_err,"Cipher Types\n");
 			OBJ_NAME_do_all_sorted(OBJ_NAME_TYPE_CIPHER_METH,
@@ -292,9 +284,7 @@ bad:
 		argv++;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if (bufsize != NULL)
 		{
@@ -373,9 +363,9 @@ bad:
 			{
 			char buf[200];
 
-			BIO_snprintf(buf,sizeof buf,"enter %s %s password:",
-				     OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
-				     (enc)?"encryption":"decryption");
+			sprintf(buf,"enter %s %s password:",
+				OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
+				(enc)?"encryption":"decryption");
 			strbuf[0]='\0';
 			i=EVP_read_pw_string((char *)strbuf,SIZE,buf,enc);
 			if (i == 0)
@@ -452,12 +442,12 @@ bad:
 			else {
 				if(enc) {
 					if(hsalt) {
-						if(!set_hex(hsalt,salt,sizeof salt)) {
+						if(!set_hex(hsalt,salt,PKCS5_SALT_LEN)) {
 							BIO_printf(bio_err,
 								"invalid hex salt value\n");
 							goto end;
 						}
-					} else if (RAND_pseudo_bytes(salt, sizeof salt) < 0)
+					} else if (RAND_pseudo_bytes(salt, PKCS5_SALT_LEN) < 0)
 						goto end;
 					/* If -P option then don't bother writing */
 					if((printkey != 2)
@@ -465,14 +455,14 @@ bad:
 							 sizeof magic-1) != sizeof magic-1
 					       || BIO_write(wbio,
 							    (char *)salt,
-							    sizeof salt) != sizeof salt)) {
+							    PKCS5_SALT_LEN) != PKCS5_SALT_LEN)) {
 						BIO_printf(bio_err,"error writing output file\n");
 						goto end;
 					}
 				} else if(BIO_read(rbio,mbuf,sizeof mbuf) != sizeof mbuf
 					  || BIO_read(rbio,
 						      (unsigned char *)salt,
-				    sizeof salt) != sizeof salt) {
+				    PKCS5_SALT_LEN) != PKCS5_SALT_LEN) {
 					BIO_printf(bio_err,"error reading input file\n");
 					goto end;
 				} else if(memcmp(mbuf,magic,sizeof magic-1)) {
@@ -491,9 +481,9 @@ bad:
 			 * bug picked up by
 			 * Larry J. Hughes Jr. <hughes@indiana.edu> */
 			if (str == strbuf)
-				OPENSSL_cleanse(str,SIZE);
+				memset(str,0,SIZE);
 			else
-				OPENSSL_cleanse(str,strlen(str));
+				memset(str,0,strlen(str));
 			}
 		if ((hiv != NULL) && !set_hex(hiv,iv,sizeof iv))
 			{
@@ -534,7 +524,7 @@ bad:
 			if (!nosalt)
 				{
 				printf("salt=");
-				for (i=0; i<(int)sizeof(salt); i++)
+				for (i=0; i<PKCS5_SALT_LEN; i++)
 					printf("%02X",salt[i]);
 				printf("\n");
 				}
@@ -596,7 +586,7 @@ end:
 	if (b64 != NULL) BIO_free(b64);
 	if(pass) OPENSSL_free(pass);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 int set_hex(char *in, unsigned char *out, int size)

apps/engine.c

@@ -56,8 +56,6 @@
  *
  */
 
-#ifndef OPENSSL_NO_ENGINE
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -79,8 +77,7 @@ static char *engine_usage[]={
 "               -vvv will also add the input flags for each command\n",
 "               -vvvv will also show internal input flags\n",
 " -c          - for each engine, also list the capabilities\n",
-" -t[t]       - for each engine, check that they are really available\n",
-"               -tt will display error trace for unavailable engines\n",
+" -t          - for each engine, check that they are really available\n",
 " -pre <cmd>  - runs command 'cmd' against the ENGINE before any attempts\n",
 "               to load it (if -t is used)\n",
 " -post <cmd> - runs command 'cmd' against the ENGINE after loading it\n",
@@ -123,8 +120,8 @@ static int append_buf(char **buf, const char *s, int *size, int step)
 		return 0;
 
 	if (**buf != '\0')
-		BUF_strlcat(*buf, ", ", *size);
-	BUF_strlcat(*buf, s, *size);
+		strcat(*buf, ", ");
+	strcat(*buf, s);
 
 	return 1;
 	}
@@ -345,7 +342,7 @@ int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
 	char **pp;
-	int verbose=0, list_cap=0, test_avail=0, test_avail_noise = 0;
+	int verbose=0, list_cap=0, test_avail=0;
 	ENGINE *e;
 	STACK *engines = sk_new_null();
 	STACK *pre_cmds = sk_new_null();
@@ -383,14 +380,8 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-c") == 0)
 			list_cap=1;
-		else if (strncmp(*argv,"-t",2) == 0)
-			{
+		else if (strcmp(*argv,"-t") == 0)
 			test_avail=1;
-			if(strspn(*argv + 1, "t") < strlen(*argv + 1))
-				goto skip_arg_loop;
-			if((test_avail_noise = strlen(*argv + 1) - 1) > 1)
-				goto skip_arg_loop;
-			}
 		else if (strcmp(*argv,"-pre") == 0)
 			{
 			argc--; argv++;
@@ -505,8 +496,7 @@ skip_digests:
 				else
 					{
 					BIO_printf(bio_out, "[ unavailable ]\n");
-					if(test_avail_noise)
-						ERR_print_errors_fp(stdout);
+					ERR_print_errors_fp(stdout);
 					ERR_clear_error();
 					}
 				}
@@ -520,19 +510,11 @@ skip_digests:
 
 	ret=0;
 end:
-
 	ERR_print_errors(bio_err);
 	sk_pop_free(engines, identity);
 	sk_pop_free(pre_cmds, identity);
 	sk_pop_free(post_cmds, identity);
 	if (bio_out != NULL) BIO_free_all(bio_out);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
-#else
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
-#endif

apps/errstr.c

@@ -122,5 +122,5 @@ int MAIN(int argc, char **argv)
 			}
 		}
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/gendh.c

@@ -57,12 +57,6 @@
  * [including the GNU Public Licence.]
  */
 
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <string.h>
@@ -81,29 +75,23 @@
 #undef PROG
 #define PROG gendh_main
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dh_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	BN_GENCB cb;
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
 	char *inrand=NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 	BIO *out=NULL;
 
 	apps_startup();
 
-	BN_GENCB_set(&cb, dh_cb, bio_err);
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
@@ -127,13 +115,11 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -152,18 +138,14 @@ bad:
 		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
 	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
 		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 		
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	out=BIO_new(BIO_s_file());
 	if (out == NULL)
@@ -201,10 +183,10 @@ bad:
 
 	BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 	BIO_printf(bio_err,"This is going to take a long time\n");
-
-	if(((dh = DH_new()) == NULL) || !DH_generate_parameters_ex(dh, num, g, &cb))
-		goto end;
+	dh=DH_generate_parameters(num,g,dh_cb,bio_err);
 		
+	if (dh == NULL) goto end;
+
 	app_RAND_write_file(NULL, bio_err);
 
 	if (!PEM_write_bio_DHparams(out,dh))
@@ -216,10 +198,10 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -227,11 +209,10 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
 #endif

apps/gendsa.c

@@ -77,9 +77,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -87,9 +85,7 @@ int MAIN(int argc, char **argv)
 	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
 	const EVP_CIPHER *enc=NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
@@ -115,13 +111,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -173,9 +167,7 @@ bad:
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
@@ -184,9 +176,7 @@ bad:
 		goto end;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
 		BIO_printf(bio_err, "Error getting password\n");
@@ -256,6 +246,6 @@ end:
 	if (dsa != NULL) DSA_free(dsa);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #endif

apps/genrsa.c

@@ -56,12 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #ifndef OPENSSL_NO_RSA
 #include <stdio.h>
 #include <string.h>
@@ -81,16 +75,13 @@
 #undef PROG
 #define PROG genrsa_main
 
-static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK genrsa_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	BN_GENCB cb;
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	int ret=1;
 	RSA *rsa=NULL;
 	int i,num=DEFBITS;
@@ -99,14 +90,11 @@ int MAIN(int argc, char **argv)
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
 	char *passargout = NULL, *passout = NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 	char *inrand=NULL;
 	BIO *out=NULL;
 
 	apps_startup();
-	BN_GENCB_set(&cb, genrsa_cb, bio_err);
 
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
@@ -134,13 +122,11 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -191,9 +177,7 @@ bad:
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
 		BIO_printf(bio_err," -3              use 3 for the E value\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"                 the random number generator\n");
@@ -207,9 +191,7 @@ bad:
 		goto err;
 	}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if (outfile == NULL)
 		{
@@ -241,9 +223,7 @@ bad:
 
 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
-
-	if(((rsa = RSA_new()) == NULL) || !RSA_generate_key_ex(rsa, num, f4, &cb))
-		goto err;
+	rsa=RSA_generate_key(num,f4,genrsa_cb,bio_err);
 		
 	app_RAND_write_file(NULL, bio_err);
 
@@ -278,10 +258,10 @@ err:
 	if (ret != 0)
 		ERR_print_errors(bio_err);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
-static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -289,12 +269,11 @@ static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
 #else /* !OPENSSL_NO_RSA */
 

apps/makeapps.com

@@ -15,10 +15,22 @@ $!
 $!  It was written so it would try to determine what "C" compiler to
 $!  use or you can specify which "C" compiler to use.
 $!
-$!  Specify DEBUG or NODEBUG as P1 to compile with or without debugger
+$!  Specify RSAREF as P1 to compile with the RSAREF library instead of
+$!  the regular one.  If you specify NORSAREF it will compile with the
+$!  regular RSAREF routines.  (Note: If you are in the United States
+$!  you MUST compile with RSAREF unless you have a license from RSA).
+$!
+$!  Note: The RSAREF libraries are NOT INCLUDED and you have to
+$!        download it from "ftp://ftp.rsa.com/rsaref".  You have to
+$!        get the ".tar-Z" file as the ".zip" file dosen't have the
+$!        directory structure stored.  You have to extract the file
+$!        into the [.RSAREF] directory under the root directory as that
+$!        is where the scripts will look for the files.
+$!
+$!  Specify DEBUG or NODEBUG as P2 to compile with or without debugger
 $!  information.
 $!
-$!  Specify which compiler at P2 to try to compile under.
+$!  Specify which compiler at P3 to try to compile under.
 $!
 $!	   VAXC	 For VAX C.
 $!	   DECC	 For DEC C.
@@ -27,16 +39,16 @@ $!
 $!  If you don't speficy a compiler, it will try to determine which
 $!  "C" compiler to use.
 $!
-$!  P3, if defined, sets a TCP/IP library to use, through one of the following
+$!  P4, if defined, sets a TCP/IP library to use, through one of the following
 $!  keywords:
 $!
 $!	UCX		for UCX
 $!	SOCKETSHR	for SOCKETSHR+NETLIB
 $!	TCPIP		for TCPIP (post UCX)
 $!
-$!  P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
+$!  P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
 $!
-$!  P5, if defined, sets a choice of programs to compile.
+$!  P6, if defined, sets a choice of programs to compile.
 $!
 $!
 $! Define A TCP/IP Library That We Will Need To Link To.
@@ -89,6 +101,10 @@ $! Define The CRYPTO Library.
 $!
 $ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
 $!
+$! Define The RSAREF Library.
+$!
+$ RSAREF_LIB := SYS$DISK:[-.'ARCH'.EXE.RSAREF]LIBRSAGLUE.OLB
+$!
 $! Define The SSL Library.
 $!
 $ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB
@@ -139,13 +155,13 @@ $! Define The Application Files.
 $!
 $ LIB_FILES = "VERIFY;ASN1PARS;REQ;DGST;DH;DHPARAM;ENC;PASSWD;GENDH;ERRSTR;"+-
 	      "CA;PKCS7;CRL2P7;CRL;"+-
-	      "RSA;RSAUTL;DSA;DSAPARAM;EC;ECPARAM;"+-
+	      "RSA;RSAUTL;DSA;DSAPARAM;"+-
 	      "X509;GENRSA;GENDSA;S_SERVER;S_CLIENT;SPEED;"+-
 	      "S_TIME;APPS;S_CB;S_SOCKET;APP_RAND;VERSION;SESS_ID;"+-
 	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP"
 $ APP_FILES := OPENSSL,'OBJ_DIR'VERIFY.OBJ,ASN1PARS.OBJ,REQ.OBJ,DGST.OBJ,DH.OBJ,DHPARAM.OBJ,ENC.OBJ,PASSWD.OBJ,GENDH.OBJ,ERRSTR.OBJ,-
 	       CA.OBJ,PKCS7.OBJ,CRL2P7.OBJ,CRL.OBJ,-
-	       RSA.OBJ,RSAUTL.OBJ,DSA.OBJ,DSAPARAM.OBJ,EC.OBJ,ECPARAM.OBJ,-
+	       RSA.OBJ,RSAUTL.OBJ,DSA.OBJ,DSAPARAM.OBJ,-
 	       X509.OBJ,GENRSA.OBJ,GENDSA.OBJ,S_SERVER.OBJ,S_CLIENT.OBJ,SPEED.OBJ,-
 	       S_TIME.OBJ,APPS.OBJ,S_CB.OBJ,S_SOCKET.OBJ,APP_RAND.OBJ,VERSION.OBJ,SESS_ID.OBJ,-
 	       CIPHERS.OBJ,NSEQ.OBJ,PKCS12.OBJ,PKCS8.OBJ,SPKAC.OBJ,SMIME.OBJ,RAND.OBJ,ENGINE.OBJ,OCSP.OBJ
@@ -166,7 +182,7 @@ $!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
-$ COMPILEWITH_CC2 = ",S_SERVER,S_CLIENT,"
+$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
 $!
 $ PHASE := LIB
 $!
@@ -277,31 +293,73 @@ $   WRITE SYS$OUTPUT FILE_NAME," needs a TCP/IP library.  Can't link.  Skipping.
 $   GOTO NEXT_FILE
 $ ENDIF
 $!
-$! Link The Program.
-$! Check To See If We Are To Link With A Specific TCP/IP Library.
+$! Link The Program, Check To See If We Need To Link With RSAREF Or Not.
 $!
-$ IF (TCPIP_LIB.NES."")
+$ IF (RSAREF.EQS."TRUE")
 $ THEN
 $!
-$! Don't Link With The RSAREF Routines And TCP/IP Library.
+$!  Check To See If We Are To Link With A Specific TCP/IP Library.
 $!
-$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'OBJECT_FILE''EXTRA_OBJ', -
-        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-        'TCPIP_LIB','OPT_FILE'/OPTION
+$   IF (TCPIP_LIB.NES."")
+$   THEN
+$!
+$!    Link With The RSAREF Library And A Specific TCP/IP Library.
+$!
+$     LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	  'OBJECT_FILE''EXTRA_OBJ', -
+          'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
+          'TCPIP_LIB','OPT_FILE'/OPTION
+$!
+$!  Else...
+$!
+$   ELSE
+$!
+$!    Link With The RSAREF Library And NO TCP/IP Library.
+$!
+$     LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	  'OBJECT_FILE''EXTRA_OBJ', -
+          'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
+          'OPT_FILE'/OPTION
+$!
+$!  End The TCP/IP Library Check.
+$!
+$   ENDIF
 $!
 $! Else...
 $!
 $ ELSE
 $!
-$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
+$!  Don't Link With The RSAREF Routines.
 $!
-$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'OBJECT_FILE''EXTRA_OBJ', -
-        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-        'OPT_FILE'/OPTION
 $!
-$! End The TCP/IP Library Check.
+$!  Check To See If We Are To Link With A Specific TCP/IP Library.
+$!
+$   IF (TCPIP_LIB.NES."")
+$   THEN
+$!
+$!    Don't Link With The RSAREF Routines And TCP/IP Library.
+$!
+$       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	    'OBJECT_FILE''EXTRA_OBJ', -
+            'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
+            'TCPIP_LIB','OPT_FILE'/OPTION
+$!
+$!  Else...
+$!
+$   ELSE
+$!
+$!    Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
+$!
+$       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	    'OBJECT_FILE''EXTRA_OBJ', -
+            'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
+            'OPT_FILE'/OPTION
+$!
+$!  End The TCP/IP Library Check.
+$!
+$   ENDIF
+$!
+$! End The RSAREF Link Check.
 $!
 $ ENDIF
 $!
@@ -468,6 +526,32 @@ $! End The Crypto Library Check.
 $!
 $ ENDIF
 $!
+$! See If We Need The RSAREF Library.
+$!
+$ IF (RSAREF.EQS."TRUE")
+$ THEN
+$!
+$!  Look For The Library LIBRSAGLUE.OLB.
+$!
+$   IF (F$SEARCH(RSAREF_LIB).EQS."")
+$   THEN
+$!
+$!    Tell The User We Can't Find The LIBRSAGLUE.OLB Library.
+$!
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "Can't Find The Library ",RSAREF_LIB,"."
+$     WRITE SYS$OUTPUT "We Can't Link Without It."
+$     WRITE SYS$OUTPUT ""
+$!
+$!    Since We Can't Link Without It, Exit.
+$!
+$     EXIT
+$   ENDIF
+$!
+$! End The RSAREF Library Check.
+$!
+$ ENDIF
+$!
 $! Look For The Library LIBSSL.OLB.
 $!
 $ IF (F$SEARCH(SSL_LIB).EQS."")
@@ -498,10 +582,87 @@ $ CHECK_OPTIONS:
 $!
 $! Check To See If P1 Is Blank.
 $!
-$ IF (P1.EQS."NODEBUG")
+$ P1 = "NORSAREF"
+$ IF (P1.EQS."NORSAREF")
 $ THEN
 $!
-$!   P1 Is NODEBUG, So Compile Without Debugger Information.
+$!   P1 Is NORSAREF, So Compile With The Regular RSA Libraries.
+$!
+$    RSAREF = "FALSE"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$!  Check To See If We Are To Use The RSAREF Library.
+$!
+$   IF (P1.EQS."RSAREF")
+$   THEN
+$!
+$!    Check To Make Sure We Have The RSAREF Source Code Directory.
+$!
+$     IF (F$SEARCH("SYS$DISK:[-.RSAREF]SOURCE.DIR").EQS."")
+$     THEN
+$!
+$!      We Don't Have The RSAREF Souce Code Directory, So Tell The
+$!      User This.
+$!
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "It appears that you don't have the RSAREF Souce Code."
+$       WRITE SYS$OUTPUT "You need to go to 'ftp://ftp.rsa.com/rsaref'.  You have to"
+$       WRITE SYS$OUTPUT "get the '.tar-Z' file as the '.zip' file dosen't have the"
+$       WRITE SYS$OUTPUT "directory structure stored.  You have to extract the file"
+$       WRITE SYS$OUTPUT "into the [.RSAREF] directory under the root directory"
+$       WRITE SYS$OUTPUT "as that is where the scripts will look for the files."
+$       WRITE SYS$OUTPUT ""
+$!
+$!      Time To Exit.
+$!
+$       EXIT
+$!
+$!    Else...
+$!
+$     ELSE
+$!
+$!      Compile Using The RSAREF Library.
+$!
+$       RSAREF = "TRUE"
+$!
+$!    End The RSAREF Soure Directory Check.
+$!
+$     ENDIF
+$!
+$!  Else...
+$!
+$   ELSE 
+$!
+$!    They Entered An Invalid Option..
+$!
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "     RSAREF   :  Compile With The RSAREF Library."
+$     WRITE SYS$OUTPUT "     NORSAREF :  Compile With The Regular RSA Library."
+$     WRITE SYS$OUTPUT ""
+$!
+$!    Time To EXIT.
+$!
+$     EXIT
+$!
+$!  End The Valid Arguement Check.
+$!
+$   ENDIF
+$!
+$! End P1 Check.
+$!
+$ ENDIF
+$!
+$! Check To See If P2 Is Blank.
+$!
+$ IF (P2.EQS."NODEBUG")
+$ THEN
+$!
+$!   P2 Is NODEBUG, So Compile Without Debugger Information.
 $!
 $    DEBUGGER  = "NODEBUG"
 $    TRACEBACK = "NOTRACEBACK" 
@@ -516,7 +677,7 @@ $ ELSE
 $!
 $!  Check To See If We Are To Compile With Debugger Information.
 $!
-$   IF (P1.EQS."DEBUG")
+$   IF (P2.EQS."DEBUG")
 $   THEN
 $!
 $!    Compile With Debugger Information.
@@ -532,7 +693,7 @@ $!
 $!    Tell The User Entered An Invalid Option..
 $!
 $     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
+$     WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "    DEBUG    :  Compile With The Debugger Information."
 $     WRITE SYS$OUTPUT "    NODEBUG  :  Compile Without The Debugger Information."
@@ -546,13 +707,13 @@ $!  End The Valid Arguement Check.
 $!
 $   ENDIF
 $!
-$! End The P1 Check.
+$! End The P2 Check.
 $!
 $ ENDIF
 $!
-$! Check To See If P2 Is Blank.
+$! Check To See If P3 Is Blank.
 $!
-$ IF (P2.EQS."")
+$ IF (P3.EQS."")
 $ THEN
 $!
 $!  O.K., The User Didn't Specify A Compiler, Let's Try To
@@ -565,7 +726,7 @@ $   THEN
 $!
 $!    Looks Like GNUC, Set To Use GNUC.
 $!
-$     P2 = "GNUC"
+$     P3 = "GNUC"
 $!
 $!  Else...
 $!
@@ -578,7 +739,7 @@ $     THEN
 $!
 $!      Looks Like DECC, Set To Use DECC.
 $!
-$       P2 = "DECC"
+$       P3 = "DECC"
 $!
 $!    Else...
 $!
@@ -586,7 +747,7 @@ $     ELSE
 $!
 $!      Looks Like VAXC, Set To Use VAXC.
 $!
-$       P2 = "VAXC"
+$       P3 = "VAXC"
 $!
 $!    End The VAXC Compiler Check.
 $!
@@ -600,9 +761,9 @@ $!  End The Compiler Check.
 $!
 $ ENDIF
 $!
-$! Check To See If We Have A Option For P3.
+$! Check To See If We Have A Option For P4.
 $!
-$ IF (P3.EQS."")
+$ IF (P4.EQS."")
 $ THEN
 $!
 $!  Find out what socket library we have available
@@ -612,7 +773,7 @@ $   THEN
 $!
 $!    We have SOCKETSHR, and it is my opinion that it's the best to use.
 $!
-$     P3 = "SOCKETSHR"
+$     P4 = "SOCKETSHR"
 $!
 $!    Tell the user
 $!
@@ -632,7 +793,7 @@ $     THEN
 $!
 $!	Last resort: a UCX or UCX-compatible library
 $!
-$	P3 = "UCX"
+$	P4 = "UCX"
 $!
 $!      Tell the user
 $!
@@ -656,12 +817,12 @@ $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 $!
 $!  Check To See If The User Entered A Valid Paramter.
 $!
-$ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC")
+$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC")
 $ THEN
 $!
 $!  Check To See If The User Wanted DECC.
 $!
-$   IF (P2.EQS."DECC")
+$   IF (P3.EQS."DECC")
 $   THEN
 $!
 $!    Looks Like DECC, Set To Use DECC.
@@ -691,7 +852,7 @@ $   ENDIF
 $!
 $!  Check To See If We Are To Use VAXC.
 $!
-$   IF (P2.EQS."VAXC")
+$   IF (P3.EQS."VAXC")
 $   THEN
 $!
 $!    Looks Like VAXC, Set To Use VAXC.
@@ -728,7 +889,7 @@ $   ENDIF
 $!
 $!  Check To See If We Are To Use GNU C.
 $!
-$   IF (P2.EQS."GNUC")
+$   IF (P3.EQS."GNUC")
 $   THEN
 $!
 $!    Looks Like GNUC, Set To Use GNUC.
@@ -757,6 +918,31 @@ $!  Set up default defines
 $!
 $   CCDEFS = """FLAT_INC=1""," + CCDEFS
 $!
+$!  Check To See If We Are To Compile With RSAREF Routines.
+$!
+$   IF (RSAREF.EQS."TRUE")
+$   THEN
+$!
+$!    Compile With RSAREF.
+$!
+$     CCDEFS = CCDEFS + ",""RSAref=1"""
+$!
+$!    Tell The User This.
+$!
+$     WRITE SYS$OUTPUT "Compiling With RSAREF Routines."
+$!
+$!    Else, We Don't Care.  Compile Without The RSAREF Library.
+$!
+$   ELSE
+$!
+$!    Tell The User We Are Compile Without The RSAREF Routines.
+$!
+$     WRITE SYS$OUTPUT "Compiling Without The RSAREF Routines.
+$!
+$!  End The RSAREF Check.
+$!
+$   ENDIF
+$!
 $!  Else The User Entered An Invalid Arguement.
 $!
 $ ELSE
@@ -764,7 +950,7 @@ $!
 $!  Tell The User We Don't Know What They Want.
 $!
 $   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"
+$   WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"
 $   WRITE SYS$OUTPUT ""
 $   WRITE SYS$OUTPUT "    VAXC  :  To Compile With VAX C."
 $   WRITE SYS$OUTPUT "    DECC  :  To Compile With DEC C."
@@ -778,13 +964,13 @@ $ ENDIF
 $!
 $! Time to check the contents, and to make sure we get the correct library.
 $!
-$ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" -
-     .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE"
+$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX" -
+     .OR. P4.EQS."TCPIP" .OR. P4.EQS."NONE"
 $ THEN
 $!
 $!  Check to see if SOCKETSHR was chosen
 $!
-$   IF P3.EQS."SOCKETSHR"
+$   IF P4.EQS."SOCKETSHR"
 $   THEN
 $!
 $!    Set the library to use SOCKETSHR
@@ -797,12 +983,12 @@ $   ENDIF
 $!
 $!  Check to see if MULTINET was chosen
 $!
-$   IF P3.EQS."MULTINET"
+$   IF P4.EQS."MULTINET"
 $   THEN
 $!
 $!    Set the library to use UCX emulation.
 $!
-$     P3 = "UCX"
+$     P4 = "UCX"
 $!
 $!    Done with MULTINET
 $!
@@ -810,7 +996,7 @@ $   ENDIF
 $!
 $!  Check to see if UCX was chosen
 $!
-$   IF P3.EQS."UCX"
+$   IF P4.EQS."UCX"
 $   THEN
 $!
 $!    Set the library to use UCX.
@@ -830,7 +1016,7 @@ $   ENDIF
 $!
 $!  Check to see if TCPIP (post UCX) was chosen
 $!
-$   IF P3.EQS."TCPIP"
+$   IF P4.EQS."TCPIP"
 $   THEN
 $!
 $!    Set the library to use TCPIP.
@@ -843,7 +1029,7 @@ $   ENDIF
 $!
 $!  Check to see if NONE was chosen
 $!
-$   IF P3.EQS."NONE"
+$   IF P4.EQS."NONE"
 $   THEN
 $!
 $!    Do not use TCPIP.
@@ -856,7 +1042,7 @@ $   ENDIF
 $!
 $!  Add TCP/IP type to CC definitions.
 $!
-$   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'"
+$   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P4'"
 $!
 $!  Print info
 $!
@@ -869,7 +1055,7 @@ $!
 $!  Tell The User We Don't Know What They Want.
 $!
 $   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"
+$   WRITE SYS$OUTPUT "The Option ",P4," Is Invalid.  The Valid Options Are:"
 $   WRITE SYS$OUTPUT ""
 $   WRITE SYS$OUTPUT "    SOCKETSHR  :  To link with SOCKETSHR TCP/IP library."
 $   WRITE SYS$OUTPUT "    UCX        :  To link with UCX TCP/IP library."
@@ -900,7 +1086,7 @@ $ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
 $!
 $! Show user the result
 $!
-$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC
+$ WRITE SYS$OUTPUT "Main Compiling Command: ",CC
 $!
 $! Special Threads For OpenVMS v7.1 Or Later
 $!
@@ -908,9 +1094,9 @@ $! Written By:  Richard Levitte
 $!              richard@levitte.org
 $!
 $!
-$! Check To See If We Have A Option For P4.
+$! Check To See If We Have A Option For P5.
 $!
-$ IF (P4.EQS."")
+$ IF (P5.EQS."")
 $ THEN
 $!
 $!  Get The Version Of VMS We Are Using.
@@ -932,15 +1118,15 @@ $!  End The VMS Version Check.
 $!
 $   ENDIF
 $!
-$! End The P4 Check.
+$! End The P5 Check.
 $!
 $ ENDIF
 $!
 $! Check if the user wanted to compile just a subset of all the programs.
 $!
-$ IF P5 .NES. ""
+$ IF P6 .NES. ""
 $ THEN
-$   PROGRAMS = P5
+$   PROGRAMS = P6
 $ ENDIF
 $!
 $!  Time To RETURN...

apps/nseq.c

@@ -58,9 +58,9 @@
 
 #include <stdio.h>
 #include <string.h>
-#include "apps.h"
 #include <openssl/pem.h>
 #include <openssl/err.h>
+#include "apps.h"
 
 #undef PROG
 #define PROG nseq_main
@@ -102,7 +102,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-in file  input file\n");
 		BIO_printf (bio_err, "-out file output file\n");
 		BIO_printf (bio_err, "-toseq    output NS Sequence file\n");
-		OPENSSL_EXIT(1);
+		EXIT(1);
 	}
 
 	if (infile) {
@@ -162,6 +162,6 @@ end:
 	BIO_free_all(out);
 	NETSCAPE_CERT_SEQUENCE_free(seq);
 
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 }
 

apps/ocsp.c

@@ -55,19 +55,31 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
-#ifndef OPENSSL_NO_OCSP
 
 #include <stdio.h>
 #include <string.h>
-#include "apps.h"
 #include <openssl/pem.h>
 #include <openssl/ocsp.h>
 #include <openssl/err.h>
 #include <openssl/ssl.h>
+#include "apps.h"
 
 /* Maximum leeway in validity period: default 5 minutes */
 #define MAX_VALIDITY_PERIOD	(5 * 60)
 
+/* CA index.txt definitions */
+#define DB_type         0
+#define DB_exp_date     1
+#define DB_rev_date     2
+#define DB_serial       3       /* index - unique */
+#define DB_file         4       
+#define DB_name         5       /* index - unique for active */
+#define DB_NUMBER       6
+
+#define DB_TYPE_REV	'R'
+#define DB_TYPE_EXP	'E'
+#define DB_TYPE_VAL	'V'
+
 static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
 static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
@@ -76,12 +88,12 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 				STACK *names, STACK_OF(OCSP_CERTID) *ids,
 				long nsec, long maxage);
 
-static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
+static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
 			int nmin, int ndays);
 
-static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser);
+static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser);
 static BIO *init_responder(char *port);
 static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port);
 static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp);
@@ -123,14 +135,13 @@ int MAIN(int argc, char **argv)
 	int accept_count = -1;
 	int badarg = 0;
 	int i;
-	int ignore_err = 0;
 	STACK *reqnames = NULL;
 	STACK_OF(OCSP_CERTID) *ids = NULL;
 
 	X509 *rca_cert = NULL;
 	char *ridx_filename = NULL;
 	char *rca_filename = NULL;
-	CA_DB *rdb = NULL;
+	TXT_DB *rdb = NULL;
 	int nmin = 0, ndays = -1;
 
 	if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
@@ -183,8 +194,6 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
-		else if (!strcmp(*args, "-ignore_err"))
-			ignore_err = 1;
 		else if (!strcmp(*args, "-noverify"))
 			noverify = 1;
 		else if (!strcmp(*args, "-nonce"))
@@ -514,7 +523,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-serial n          serial number to check\n");
 		BIO_printf (bio_err, "-signer file       certificate to sign OCSP request with\n");
 		BIO_printf (bio_err, "-signkey file      private key to sign OCSP request with\n");
-		BIO_printf (bio_err, "-sign_other file   additional certificates to include in signed request\n");
+		BIO_printf (bio_err, "-sign_certs file   additional certificates to include in signed request\n");
 		BIO_printf (bio_err, "-no_certs          don't include any certificates in signed request\n");
 		BIO_printf (bio_err, "-req_text          print text form of request\n");
 		BIO_printf (bio_err, "-resp_text         print text form of response\n");
@@ -534,18 +543,18 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-validity_period n maximum validity discrepancy in seconds\n");
 		BIO_printf (bio_err, "-status_age n      maximum status age in seconds\n");
 		BIO_printf (bio_err, "-noverify          don't verify response at all\n");
-		BIO_printf (bio_err, "-verify_other file additional certificates to search for signer\n");
+		BIO_printf (bio_err, "-verify_certs file additional certificates to search for signer\n");
 		BIO_printf (bio_err, "-trust_other       don't verify additional certificates\n");
 		BIO_printf (bio_err, "-no_intern         don't search certificates contained in response for signer\n");
-		BIO_printf (bio_err, "-no_signature_verify don't check signature on response\n");
+		BIO_printf (bio_err, "-no_sig_verify     don't check signature on response\n");
 		BIO_printf (bio_err, "-no_cert_verify    don't check signing certificate\n");
 		BIO_printf (bio_err, "-no_chain          don't chain verify response\n");
 		BIO_printf (bio_err, "-no_cert_checks    don't do additional checks on signing certificate\n");
 		BIO_printf (bio_err, "-port num		 port to run responder on\n");
 		BIO_printf (bio_err, "-index file	 certificate status index file\n");
 		BIO_printf (bio_err, "-CA file		 CA certificate\n");
-		BIO_printf (bio_err, "-rsigner file	 responder certificate to sign responses with\n");
-		BIO_printf (bio_err, "-rkey file	 responder key to sign responses with\n");
+		BIO_printf (bio_err, "-rsigner file	 responder certificate to sign requests with\n");
+		BIO_printf (bio_err, "-rkey file	 responder key to sign requests with\n");
 		BIO_printf (bio_err, "-rother file	 other certificates to include in response\n");
 		BIO_printf (bio_err, "-resp_no_certs     don't include any certificates in response\n");
 		BIO_printf (bio_err, "-nmin n	 	 number of minutes before next update\n");
@@ -604,11 +613,11 @@ int MAIN(int argc, char **argv)
 			NULL, e, "CA certificate");
 		if (rcertfile)
 			{
-			rother = load_certs(bio_err, rcertfile, FORMAT_PEM,
+			rother = load_certs(bio_err, sign_certfile, FORMAT_PEM,
 				NULL, e, "responder other certificates");
-			if (!rother) goto end;
+			if (!sign_other) goto end;
 			}
-		rkey = load_key(bio_err, rkeyfile, FORMAT_PEM, 0, NULL, NULL,
+		rkey = load_key(bio_err, rkeyfile, FORMAT_PEM, NULL, NULL,
 			"responder private key");
 		if (!rkey)
 			goto end;
@@ -654,7 +663,7 @@ int MAIN(int argc, char **argv)
 				NULL, e, "signer certificates");
 			if (!sign_other) goto end;
 			}
-		key = load_key(bio_err, keyfile, FORMAT_PEM, 0, NULL, NULL,
+		key = load_key(bio_err, keyfile, FORMAT_PEM, NULL, NULL,
 			"signer private key");
 		if (!key)
 			goto end;
@@ -667,18 +676,6 @@ int MAIN(int argc, char **argv)
 
 	if (req_text && req) OCSP_REQUEST_print(out, req, 0);
 
-	if (reqout)
-		{
-		derbio = BIO_new_file(reqout, "wb");
-		if(!derbio)
-			{
-			BIO_printf(bio_err, "Error opening file %s\n", reqout);
-			goto end;
-			}
-		i2d_OCSP_REQUEST_bio(derbio, req);
-		BIO_free(derbio);
-		}
-
 	if (ridx_filename && (!rkey || !rsigner || !rca_cert))
 		{
 		BIO_printf(bio_err, "Need a responder certificate, key and CA for this operation!\n");
@@ -687,9 +684,22 @@ int MAIN(int argc, char **argv)
 
 	if (ridx_filename && !rdb)
 		{
-		rdb = load_index(ridx_filename, NULL);
-		if (!rdb) goto end;
-		if (!index_index(rdb)) goto end;
+		BIO *db_bio = NULL;
+		db_bio = BIO_new_file(ridx_filename, "r");
+		if (!db_bio)
+			{
+			BIO_printf(bio_err, "Error opening index file %s\n", ridx_filename);
+			goto end;
+			}
+		rdb = TXT_DB_read(db_bio, DB_NUMBER);
+		BIO_free(db_bio);
+		if (!rdb)
+			{
+			BIO_printf(bio_err, "Error reading index file %s\n", ridx_filename);
+			goto end;
+			}
+		if (!make_serial_index(rdb))
+			goto end;
 		}
 
 	if (rdb)
@@ -700,12 +710,7 @@ int MAIN(int argc, char **argv)
 		}
 	else if (host)
 		{
-#ifndef OPENSSL_NO_SOCK
 		cbio = BIO_new_connect(host);
-#else
-		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
-		goto end;
-#endif
 		if (!cbio)
 			{
 			BIO_printf(bio_err, "Error creating connect BIO\n");
@@ -715,16 +720,7 @@ int MAIN(int argc, char **argv)
 		if (use_ssl == 1)
 			{
 			BIO *sbio;
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 			ctx = SSL_CTX_new(SSLv23_client_method());
-#elif !defined(OPENSSL_NO_SSL3)
-			ctx = SSL_CTX_new(SSLv3_client_method());
-#elif !defined(OPENSSL_NO_SSL2)
-			ctx = SSL_CTX_new(SSLv2_client_method());
-#else
-			BIO_printf(bio_err, "SSL is disabled\n");
-			goto end;
-#endif
 			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
 			sbio = BIO_new_ssl(ctx, 1);
 			cbio = BIO_push(sbio, cbio);
@@ -784,10 +780,8 @@ int MAIN(int argc, char **argv)
 
 	if (i != OCSP_RESPONSE_STATUS_SUCCESSFUL)
 		{
-		BIO_printf(out, "Responder Error: %s (%d)\n",
+		BIO_printf(out, "Responder Error: %s (%ld)\n",
 				OCSP_response_status_str(i), i);
-		if (ignore_err)
-			goto redo_accept;
 		ret = 0;
 		goto end;
 		}
@@ -815,8 +809,6 @@ int MAIN(int argc, char **argv)
 
 	if (!store)
 		store = setup_verify(bio_err, CAfile, CApath);
-	if (!store)
-		goto end;
 	if (verify_certfile)
 		{
 		verify_other = load_certs(bio_err, verify_certfile, FORMAT_PEM,
@@ -850,7 +842,7 @@ int MAIN(int argc, char **argv)
 
 		if(i <= 0)
 			{
-			BIO_printf(bio_err, "Response Verify Failure\n");
+			BIO_printf(bio_err, "Response Verify Failure\n", i);
 			ERR_print_errors(bio_err);
 			}
 		else
@@ -873,7 +865,7 @@ end:
 	X509_free(cert);
 	X509_free(rsigner);
 	X509_free(rca_cert);
-	free_index(rdb);
+	TXT_DB_free(rdb);
 	BIO_free_all(cbio);
 	BIO_free_all(acbio);
 	BIO_free(out);
@@ -893,7 +885,7 @@ end:
 		SSL_CTX_free(ctx);
 		}
 
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 }
 
 static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
@@ -1015,7 +1007,7 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 	}
 
 
-static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
+static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
 			int nmin, int ndays)
@@ -1107,20 +1099,17 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 
 	}
 
-static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser)
+static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser)
 	{
 	int i;
 	BIGNUM *bn = NULL;
 	char *itmp, *row[DB_NUMBER],**rrow;
 	for (i = 0; i < DB_NUMBER; i++) row[i] = NULL;
 	bn = ASN1_INTEGER_to_BN(ser,NULL);
-	if (BN_is_zero(bn))
-		itmp = BUF_strdup("00");
-	else
-		itmp = BN_bn2hex(bn);
+	itmp = BN_bn2hex(bn);
 	row[DB_serial] = itmp;
 	BN_free(bn);
-	rrow=TXT_DB_get_by_index(db->db,DB_serial,row);
+	rrow=TXT_DB_get_by_index(db,DB_serial,row);
 	OPENSSL_free(itmp);
 	return rrow;
 	}
@@ -1133,11 +1122,7 @@ static BIO *init_responder(char *port)
 	bufbio = BIO_new(BIO_f_buffer());
 	if (!bufbio) 
 		goto err;
-#ifndef OPENSSL_NO_SOCK
 	acbio = BIO_new_accept(port);
-#else
-	BIO_printf(bio_err, "Error setting up accept BIO - sockets not supported.\n");
-#endif
 	if (!acbio)
 		goto err;
 	BIO_set_accept_bios(acbio, bufbio);
@@ -1177,7 +1162,7 @@ static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port
 
 	for(;;)
 		{
-		len = BIO_gets(cbio, inbuf, sizeof inbuf);
+		len = BIO_gets(cbio, inbuf, 1024);
 		if (len <= 0)
 			return 1;
 		/* Look for "POST" signalling start of query */
@@ -1224,4 +1209,3 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 	return 1;
 	}
 
-#endif

apps/openssl.c

@@ -114,7 +114,6 @@
 #include <string.h>
 #include <stdlib.h>
 #define OPENSSL_C /* tells apps.h to use complete apps_startup() */
-#include "apps.h"
 #include <openssl/bio.h>
 #include <openssl/crypto.h>
 #include <openssl/lhash.h>
@@ -122,10 +121,9 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #include <openssl/ssl.h>
-#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
-#endif
 #define USE_SOCKETS /* needed for the _O_BINARY defs in the MS world */
+#include "apps.h"
 #include "progs.h"
 #include "s_apps.h"
 #include <openssl/err.h>
@@ -141,11 +139,11 @@ static unsigned long MS_CALLBACK hash(const void *a_void);
 static int MS_CALLBACK cmp(const void *a_void,const void *b_void);
 static LHASH *prog_init(void );
 static int do_cmd(LHASH *prog,int argc,char *argv[]);
+CONF *config=NULL;
 char *default_config_file=NULL;
 
 /* Make sure there is only one when MONOLITH is defined */
 #ifdef MONOLITH
-CONF *config=NULL;
 BIO *bio_err=NULL;
 #endif
 
@@ -163,7 +161,7 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 		goto err;
 		}
 
-	if (type < 0 || type >= CRYPTO_NUM_LOCKS)
+	if (type < 0 || type > CRYPTO_NUM_LOCKS)
 		{
 		errstr = "type out of bounds";
 		goto err;
@@ -220,8 +218,7 @@ int main(int Argc, char *Argv[])
 #define PROG_NAME_SIZE	39
 	char pname[PROG_NAME_SIZE+1];
 	FUNCTION f,*fp;
-	MS_STATIC char *prompt,buf[1024];
-	char *to_free=NULL;
+	MS_STATIC char *prompt,buf[1024],config_name[256];
 	int n,i,ret=0;
 	int argc;
 	char **argv,*p;
@@ -231,10 +228,6 @@ int main(int Argc, char *Argv[])
 	arg.data=NULL;
 	arg.count=0;
 
-	if (bio_err == NULL)
-		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
-			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
-
 	if (getenv("OPENSSL_DEBUG_MEMORY") != NULL) /* if not defined, use compiled-in library defaults */
 		{
 		if (!(0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off")))
@@ -259,12 +252,23 @@ int main(int Argc, char *Argv[])
 
 	apps_startup();
 
+	if (bio_err == NULL)
+		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
+			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
 	/* Lets load up our environment a little */
 	p=getenv("OPENSSL_CONF");
 	if (p == NULL)
 		p=getenv("SSLEAY_CONF");
 	if (p == NULL)
-		p=to_free=make_config_name();
+		{
+		strcpy(config_name,X509_get_default_cert_area());
+#ifndef OPENSSL_SYS_VMS
+		strcat(config_name,"/");
+#endif
+		strcat(config_name,OPENSSL_CONF);
+		p=config_name;
+		}
 
 	default_config_file=p;
 
@@ -280,7 +284,7 @@ int main(int Argc, char *Argv[])
 	prog=prog_init();
 
 	/* first check the program name */
-	program_name(Argv[0],pname,sizeof pname);
+	program_name(Argv[0],pname,PROG_NAME_SIZE);
 
 	f.name=pname;
 	fp=(FUNCTION *)lh_retrieve(prog,&f);
@@ -308,7 +312,7 @@ int main(int Argc, char *Argv[])
 		{
 		ret=0;
 		p=buf;
-		n=sizeof buf;
+		n=1024;
 		i=0;
 		for (;;)
 			{
@@ -342,8 +346,6 @@ int main(int Argc, char *Argv[])
 	BIO_printf(bio_err,"bad exit\n");
 	ret=1;
 end:
-	if (to_free)
-		OPENSSL_free(to_free);
 	if (config != NULL)
 		{
 		NCONF_free(config);
@@ -360,7 +362,7 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 #define LIST_STANDARD_COMMANDS "list-standard-commands"

apps/openssl.cnf

@@ -38,14 +38,10 @@ dir		= ./demoCA		# Where everything is kept
 certs		= $dir/certs		# Where the issued certs are kept
 crl_dir		= $dir/crl		# Where the issued crl are kept
 database	= $dir/index.txt	# database index file.
-#unique_subject	= no			# Set to 'no' to allow creation of
-					# several ctificates with same subject.
 new_certs_dir	= $dir/newcerts		# default place for new certs.
 
 certificate	= $dir/cacert.pem 	# The CA certificate
 serial		= $dir/serial 		# The current serial number
-crlnumber	= $dir/crlnumber	# the current crl number
-					# must be commented out to leave a V1 CRL
 crl		= $dir/crl.pem 		# The current CRL
 private_key	= $dir/private/cakey.pem# The private key
 RANDFILE	= $dir/private/.rand	# private random number file
@@ -62,7 +58,6 @@ cert_opt 	= ca_default		# Certificate field options
 
 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
-# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext
 
 default_days	= 365			# how long to certify for

apps/passwd.c

@@ -19,6 +19,7 @@
 # include <openssl/des.h>
 #endif
 #ifndef NO_MD5CRYPT_1
+# include <openssl/evp.h>
 # include <openssl/md5.h>
 #endif
 
@@ -292,7 +293,7 @@ err:
 	if (out)
 		BIO_free_all(out);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 
@@ -312,8 +313,7 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	static char out_buf[6 + 9 + 24 + 2]; /* "$apr1$..salt..$.......md5hash..........\0" */
 	unsigned char buf[MD5_DIGEST_LENGTH];
 	char *salt_out;
-	int n;
-	unsigned int i;
+	int n, i;
 	EVP_MD_CTX md,md2;
 	size_t passwd_len, salt_len;
 
@@ -506,6 +506,6 @@ err:
 int MAIN(int argc, char **argv)
 	{
 	fputs("Program not available.\n", stderr)
-	OPENSSL_EXIT(1);
+	EXIT(1);
 	}
 #endif

apps/pkcs12.c

@@ -2,10 +2,10 @@
 #if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
 
 /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
+ * project 1999.
  */
 /* ====================================================================
- * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -120,9 +120,7 @@ int MAIN(int argc, char **argv)
     char *passin = NULL, *passout = NULL;
     char *inrand = NULL;
     char *CApath = NULL, *CAfile = NULL;
-#ifndef OPENSSL_NO_ENGINE
     char *engine=NULL;
-#endif
 
     apps_startup();
 
@@ -166,14 +164,10 @@ int MAIN(int argc, char **argv)
 					 maciter = PKCS12_DEFAULT_ITER;
 		else if (!strcmp (*args, "-nomaciter"))
 					 maciter = 1;
-		else if (!strcmp (*args, "-nomac"))
-					 maciter = -1;
 		else if (!strcmp (*args, "-nodes")) enc=NULL;
 		else if (!strcmp (*args, "-certpbe")) {
 			if (args[1]) {
 				args++;
-				if (!strcmp(*args, "NONE"))
-					cert_pbe = -1;
 				cert_pbe=OBJ_txt2nid(*args);
 				if(cert_pbe == NID_undef) {
 					BIO_printf(bio_err,
@@ -184,10 +178,7 @@ int MAIN(int argc, char **argv)
 		} else if (!strcmp (*args, "-keypbe")) {
 			if (args[1]) {
 				args++;
-				if (!strcmp(*args, "NONE"))
-					key_pbe = -1;
-				else
-					key_pbe=OBJ_txt2nid(*args);
+				key_pbe=OBJ_txt2nid(*args);
 				if(key_pbe == NID_undef) {
 					BIO_printf(bio_err,
 						 "Unknown PBE algorithm %s\n", *args);
@@ -261,13 +252,11 @@ int MAIN(int argc, char **argv)
 			args++;	
 			CAfile = *args;
 		    } else badarg = 1;
-#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 		    if (args[1]) {
 			args++;	
 			engine = *args;
 		    } else badarg = 1;
-#endif
 		} else badarg = 1;
 
 	} else badarg = 1;
@@ -315,18 +304,14 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
 	BIO_printf (bio_err, "-passin p     input file pass phrase source\n");
 	BIO_printf (bio_err, "-passout p    output file pass phrase source\n");
-#ifndef OPENSSL_NO_ENGINE
 	BIO_printf (bio_err, "-engine e     use engine e, possibly a hardware device.\n");
-#endif
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
     	goto end;
     }
 
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-#endif
 
     if(passarg) {
 	if(export_cert) passargout = passarg;
@@ -372,6 +357,24 @@ int MAIN(int argc, char **argv)
 	    goto end;
    }
 
+#if 0
+   if (certfile) {
+    	if(!(certsin = BIO_new_file(certfile, "r"))) {
+	    BIO_printf(bio_err, "Can't open certificate file %s\n", certfile);
+	    perror (certfile);
+	    goto end;
+	}
+    }
+
+    if (keyname) {
+    	if(!(inkey = BIO_new_file(keyname, "r"))) {
+	    BIO_printf(bio_err, "Can't key certificate file %s\n", keyname);
+	    perror (keyname);
+	    goto end;
+	}
+     }
+#endif
+
 #ifdef CRYPTO_MDEBUG
     CRYPTO_pop_info();
     CRYPTO_push_info("write files");
@@ -396,7 +399,7 @@ int MAIN(int argc, char **argv)
 #ifdef CRYPTO_MDEBUG
     CRYPTO_push_info("read MAC password");
 #endif
-	if(EVP_read_pw_string (macpass, sizeof macpass, "Enter MAC Password:", export_cert))
+	if(EVP_read_pw_string (macpass, 50, "Enter MAC Password:", export_cert))
 	{
     	    BIO_printf (bio_err, "Can't read Password\n");
     	    goto end;
@@ -408,31 +411,27 @@ int MAIN(int argc, char **argv)
 
     if (export_cert) {
 	EVP_PKEY *key = NULL;
-	X509 *ucert = NULL, *x = NULL;
+	STACK_OF(PKCS12_SAFEBAG) *bags = NULL;
+	STACK_OF(PKCS7) *safes = NULL;
+	PKCS12_SAFEBAG *bag = NULL;
+	PKCS8_PRIV_KEY_INFO *p8 = NULL;
+	PKCS7 *authsafe = NULL;
+	X509 *ucert = NULL;
 	STACK_OF(X509) *certs=NULL;
-	unsigned char *catmp = NULL;
+	char *catmp = NULL;
 	int i;
-
-	if ((options & (NOCERTS|NOKEYS)) == (NOCERTS|NOKEYS))
-		{	
-		BIO_printf(bio_err, "Nothing to do!\n");
-		goto export_end;
-		}
-
-	if (options & NOCERTS)
-		chain = 0;
+	unsigned char keyid[EVP_MAX_MD_SIZE];
+	unsigned int keyidlen = 0;
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_push_info("process -export_cert");
 	CRYPTO_push_info("reading private key");
 #endif
-	if (!(options & NOKEYS))
-		{
-		key = load_key(bio_err, keyname ? keyname : infile,
-				FORMAT_PEM, 1, passin, e, "private key");
-		if (!key)
-			goto export_end;
-		}
+	key = load_key(bio_err, keyname ? keyname : infile, FORMAT_PEM,
+		passin, e, "private key");
+	if (!key) {
+		goto export_end;
+	}
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -440,62 +439,50 @@ int MAIN(int argc, char **argv)
 #endif
 
 	/* Load in all certs in input file */
-	if(!(options & NOCERTS))
-		{
-		certs = load_certs(bio_err, infile, FORMAT_PEM, NULL, e,
-							"certificates");
-		if (!certs)
-			goto export_end;
-
-		if (key)
-			{
-			/* Look for matching private key */
-			for(i = 0; i < sk_X509_num(certs); i++)
-				{
-				x = sk_X509_value(certs, i);
-				if(X509_check_private_key(x, key))
-					{
-					ucert = x;
-					/* Zero keyid and alias */
-					X509_keyid_set1(ucert, NULL, 0);
-					X509_alias_set1(ucert, NULL, 0);
-					/* Remove from list */
-					sk_X509_delete(certs, i);
-					break;
-					}
-				}
-			if (!ucert)
-				{
-				BIO_printf(bio_err, "No certificate matches private key\n");
-				goto export_end;
-				}
-			}
-
-		}
+	if(!(certs = load_certs(bio_err, infile, FORMAT_PEM, NULL, e,
+		"certificates"))) {
+		goto export_end;
+	}
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("reading certs from input 2");
 #endif
 
-	/* Add any more certificates asked for */
-	if(certfile)
-		{
-		STACK_OF(X509) *morecerts=NULL;
-		if(!(morecerts = load_certs(bio_err, certfile, FORMAT_PEM,
-					    NULL, e,
-					    "certificates from certfile")))
-			goto export_end;
-		while(sk_X509_num(morecerts) > 0)
-			sk_X509_push(certs, sk_X509_shift(morecerts));
-		sk_X509_free(morecerts);
- 		}
-
+	for(i = 0; i < sk_X509_num(certs); i++) {
+		ucert = sk_X509_value(certs, i);
+		if(X509_check_private_key(ucert, key)) {
+			X509_digest(ucert, EVP_sha1(), keyid, &keyidlen);
+			break;
+		}
+	}
+	if(!keyidlen) {
+		ucert = NULL;
+		BIO_printf(bio_err, "No certificate matches private key\n");
+		goto export_end;
+	}
+	
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("reading certs from certfile");
 #endif
 
+	bags = sk_PKCS12_SAFEBAG_new_null ();
+
+	/* Add any more certificates asked for */
+	if (certfile) {
+		STACK_OF(X509) *morecerts=NULL;
+		if(!(morecerts = load_certs(bio_err, certfile, FORMAT_PEM,
+					    NULL, e,
+					    "certificates from certfile"))) {
+			goto export_end;
+		}
+		while(sk_X509_num(morecerts) > 0) {
+			sk_X509_push(certs, sk_X509_shift(morecerts));
+		}
+		sk_X509_free(morecerts);
+ 	}
+
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("building chain");
@@ -521,61 +508,111 @@ int MAIN(int argc, char **argv)
 		    /* Exclude verified certificate */
 		    for (i = 1; i < sk_X509_num (chain2) ; i++) 
 			sk_X509_push(certs, sk_X509_value (chain2, i));
-		    /* Free first certificate */
-		    X509_free(sk_X509_value(chain2, 0));
-		    sk_X509_free(chain2);
-		} else {
+		}
+		sk_X509_free(chain2);
+		if (vret) {
 			BIO_printf (bio_err, "Error %s getting chain.\n",
 					X509_verify_cert_error_string(vret));
 			goto export_end;
 		}			
     	}
 
-	/* Add any CA names */
+#ifdef CRYPTO_MDEBUG
+	CRYPTO_pop_info();
+	CRYPTO_push_info("building bags");
+#endif
 
-	for (i = 0; i < sk_num(canames); i++)
-		{
-		catmp = (unsigned char *)sk_value(canames, i);
-		X509_alias_set1(sk_X509_value(certs, i), catmp, -1);
-		}
-		
+	/* We now have loads of certificates: include them all */
+	for(i = 0; i < sk_X509_num(certs); i++) {
+		X509 *cert = NULL;
+		cert = sk_X509_value(certs, i);
+		bag = PKCS12_x5092certbag(cert);
+		/* If it matches private key set id */
+		if(cert == ucert) {
+			if(name) PKCS12_add_friendlyname(bag, name, -1);
+			PKCS12_add_localkeyid(bag, keyid, keyidlen);
+		} else if((catmp = sk_shift(canames))) 
+				PKCS12_add_friendlyname(bag, catmp, -1);
+		sk_PKCS12_SAFEBAG_push(bags, bag);
+	}
+	sk_X509_pop_free(certs, X509_free);
+	certs = NULL;
+	/* ucert is part of certs so it is already freed */
+	ucert = NULL;
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
-	CRYPTO_push_info("reading password");
+	CRYPTO_push_info("encrypting bags");
 #endif
 
 	if(!noprompt &&
-		EVP_read_pw_string(pass, sizeof pass, "Enter Export Password:", 1))
-		{
-	    	BIO_printf (bio_err, "Can't read Password\n");
-	    	goto export_end;
-        	}
-	if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
+		EVP_read_pw_string(pass, 50, "Enter Export Password:", 1)) {
+	    BIO_printf (bio_err, "Can't read Password\n");
+	    goto export_end;
+        }
+	if (!twopass) strcpy(macpass, pass);
+	/* Turn certbags into encrypted authsafe */
+	authsafe = PKCS12_pack_p7encdata(cert_pbe, cpass, -1, NULL, 0,
+								 iter, bags);
+	sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
+	bags = NULL;
+
+	if (!authsafe) {
+		ERR_print_errors (bio_err);
+		goto export_end;
+	}
+
+	safes = sk_PKCS7_new_null ();
+	sk_PKCS7_push (safes, authsafe);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
-	CRYPTO_push_info("creating PKCS#12 structure");
+	CRYPTO_push_info("building shrouded key bag");
 #endif
 
-	p12 = PKCS12_create(cpass, name, key, ucert, certs,
-				key_pbe, cert_pbe, iter, -1, keytype);
+	/* Make a shrouded key bag */
+	p8 = EVP_PKEY2PKCS8 (key);
+	if(keytype) PKCS8_add_keyusage(p8, keytype);
+	bag = PKCS12_MAKE_SHKEYBAG(key_pbe, cpass, -1, NULL, 0, iter, p8);
+	PKCS8_PRIV_KEY_INFO_free(p8);
+	p8 = NULL;
+        if (name) PKCS12_add_friendlyname (bag, name, -1);
+	if(csp_name) PKCS12_add_CSPName_asc(bag, csp_name, -1);
+	PKCS12_add_localkeyid (bag, keyid, keyidlen);
+	bags = sk_PKCS12_SAFEBAG_new_null();
+	sk_PKCS12_SAFEBAG_push (bags, bag);
 
-	if (!p12)
-		{
-	    	ERR_print_errors (bio_err);
-		goto export_end;
-		}
+#ifdef CRYPTO_MDEBUG
+	CRYPTO_pop_info();
+	CRYPTO_push_info("encrypting shrouded key bag");
+#endif
 
-	if (maciter != -1)
-		PKCS12_set_mac(p12, mpass, -1, NULL, 0, maciter, NULL);
+	/* Turn it into unencrypted safe bag */
+	authsafe = PKCS12_pack_p7data (bags);
+	sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
+	bags = NULL;
+	sk_PKCS7_push (safes, authsafe);
+
+#ifdef CRYPTO_MDEBUG
+	CRYPTO_pop_info();
+	CRYPTO_push_info("building pkcs12");
+#endif
+
+	p12 = PKCS12_init(NID_pkcs7_data);
+
+	PKCS12_pack_authsafes(p12, safes);
+
+	sk_PKCS7_pop_free(safes, PKCS7_free);
+	safes = NULL;
+
+	PKCS12_set_mac (p12, mpass, -1, NULL, 0, maciter, NULL);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("writing pkcs12");
 #endif
 
-	i2d_PKCS12_bio(out, p12);
+	i2d_PKCS12_bio (out, p12);
 
 	ret = 0;
 
@@ -588,6 +625,8 @@ int MAIN(int argc, char **argv)
 
 	if (key) EVP_PKEY_free(key);
 	if (certs) sk_X509_pop_free(certs, X509_free);
+	if (safes) sk_PKCS7_pop_free(safes, PKCS7_free);
+	if (bags) sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
 	if (ucert) X509_free(ucert);
 
 #ifdef CRYPTO_MDEBUG
@@ -605,7 +644,7 @@ int MAIN(int argc, char **argv)
 #ifdef CRYPTO_MDEBUG
     CRYPTO_push_info("read import password");
 #endif
-    if(!noprompt && EVP_read_pw_string(pass, sizeof pass, "Enter Import Password:", 0)) {
+    if(!noprompt && EVP_read_pw_string(pass, 50, "Enter Import Password:", 0)) {
 	BIO_printf (bio_err, "Can't read Password\n");
 	goto end;
     }
@@ -613,7 +652,7 @@ int MAIN(int argc, char **argv)
     CRYPTO_pop_info();
 #endif
 
-    if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
+    if (!twopass) strcpy(macpass, pass);
 
     if (options & INFO) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
     if(macver) {
@@ -659,7 +698,7 @@ int MAIN(int argc, char **argv)
     if(passin) OPENSSL_free(passin);
     if(passout) OPENSSL_free(passout);
     apps_shutdown();
-    OPENSSL_EXIT(ret);
+    EXIT(ret);
 }
 
 int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
@@ -814,9 +853,8 @@ int alg_print (BIO *x, X509_ALGOR *alg)
 	unsigned char *p;
 	p = alg->parameter->value.sequence->data;
 	pbe = d2i_PBEPARAM (NULL, &p, alg->parameter->value.sequence->length);
-	BIO_printf (bio_err, "%s, Iteration %ld\n", 
-		OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)),
-		ASN1_INTEGER_get(pbe->iter));
+	BIO_printf (bio_err, "%s, Iteration %d\n", 
+	OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)), ASN1_INTEGER_get(pbe->iter));
 	PBEPARAM_free (pbe);
 	return 0;
 }

apps/pkcs7.c

@@ -82,19 +82,15 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat;
 	char *infile,*outfile,*prog;
 	int print_certs=0,text=0,noout=0;
-	int ret=1;
-#ifndef OPENSSL_NO_ENGINE
+	int ret=0;
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
@@ -102,9 +98,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	if (!load_config(bio_err, NULL))
-		goto end;
-
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -141,13 +134,11 @@ int MAIN(int argc, char **argv)
 			text=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -170,18 +161,14 @@ bad:
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
 		ret = 1;
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -314,5 +301,5 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/pkcs8.c

@@ -63,6 +63,7 @@
 #include <openssl/evp.h>
 #include <openssl/pkcs12.h>
 
+#include "apps.h"
 #define PROG pkcs8_main
 
 int MAIN(int, char **);
@@ -85,9 +86,7 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey=NULL;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
@@ -147,13 +146,11 @@ int MAIN(int argc, char **argv)
 			if (!args[1]) goto bad;
 			passargout= *(++args);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*args,"-engine") == 0)
 			{
 			if (!args[1]) goto bad;
 			engine= *(++args);
 			}
-#endif
 		else if (!strcmp (*args, "-in")) {
 			if (args[1]) {
 				args++;
@@ -186,15 +183,11 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-nocrypt        use or expect unencrypted private key\n");
 		BIO_printf(bio_err, "-v2 alg         use PKCS#5 v2.0 and cipher \"alg\"\n");
 		BIO_printf(bio_err, "-v1 obj         use PKCS#5 v1.5 and cipher \"alg\"\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
 		return (1);
 	}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -229,17 +222,13 @@ int MAIN(int argc, char **argv)
 	if (topk8)
 		{
 		BIO_free(in); /* Not needed in this section */
-		pkey = load_key(bio_err, infile, informat, 1,
-			passin, e, "key");
+		pkey = load_key(bio_err, infile, informat, passin, e, "key");
 		if (!pkey) {
-			BIO_free_all(out);
 			return (1);
 		}
 		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken))) {
-			BIO_printf(bio_err, "Error converting key\n");
+			BIO_printf(bio_err, "Error converting key\n", outfile);
 			ERR_print_errors(bio_err);
-			EVP_PKEY_free(pkey);
-			BIO_free_all(out);
 			return (1);
 		}
 		if(nocrypt) {
@@ -249,32 +238,21 @@ int MAIN(int argc, char **argv)
 				i2d_PKCS8_PRIV_KEY_INFO_bio(out, p8inf);
 			else {
 				BIO_printf(bio_err, "Bad format specified for key\n");
-				PKCS8_PRIV_KEY_INFO_free(p8inf);
-				EVP_PKEY_free(pkey);
-				BIO_free_all(out);
 				return (1);
 			}
 		} else {
 			if(passout) p8pass = passout;
 			else {
 				p8pass = pass;
-				if (EVP_read_pw_string(pass, sizeof pass, "Enter Encryption Password:", 1))
-				{
-					PKCS8_PRIV_KEY_INFO_free(p8inf);
-					EVP_PKEY_free(pkey);
-					BIO_free_all(out);
-					return (1);
-				}
+				EVP_read_pw_string(pass, 50, "Enter Encryption Password:", 1);
 			}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,
 					p8pass, strlen(p8pass),
 					NULL, 0, iter, p8inf))) {
-				BIO_printf(bio_err, "Error encrypting key\n");
+				BIO_printf(bio_err, "Error encrypting key\n",
+								 outfile);
 				ERR_print_errors(bio_err);
-				PKCS8_PRIV_KEY_INFO_free(p8inf);
-				EVP_PKEY_free(pkey);
-				BIO_free_all(out);
 				return (1);
 			}
 			app_RAND_write_file(NULL, bio_err);
@@ -284,9 +262,6 @@ int MAIN(int argc, char **argv)
 				i2d_PKCS8_bio(out, p8);
 			else {
 				BIO_printf(bio_err, "Bad format specified for key\n");
-				PKCS8_PRIV_KEY_INFO_free(p8inf);
-				EVP_PKEY_free(pkey);
-				BIO_free_all(out);
 				return (1);
 			}
 			X509_SIG_free(p8);
@@ -319,27 +294,27 @@ int MAIN(int argc, char **argv)
 		}
 
 		if (!p8) {
-			BIO_printf (bio_err, "Error reading key\n");
+			BIO_printf (bio_err, "Error reading key\n", outfile);
 			ERR_print_errors(bio_err);
 			return (1);
 		}
 		if(passin) p8pass = passin;
 		else {
 			p8pass = pass;
-			EVP_read_pw_string(pass, sizeof pass, "Enter Password:", 0);
+			EVP_read_pw_string(pass, 50, "Enter Password:", 0);
 		}
 		p8inf = PKCS8_decrypt(p8, p8pass, strlen(p8pass));
 		X509_SIG_free(p8);
 	}
 
 	if (!p8inf) {
-		BIO_printf(bio_err, "Error decrypting key\n");
+		BIO_printf(bio_err, "Error decrypting key\n", outfile);
 		ERR_print_errors(bio_err);
 		return (1);
 	}
 
 	if (!(pkey = EVP_PKCS82PKEY(p8inf))) {
-		BIO_printf(bio_err, "Error converting key\n");
+		BIO_printf(bio_err, "Error converting key\n", outfile);
 		ERR_print_errors(bio_err);
 		return (1);
 	}

apps/progs.h

@@ -17,8 +17,6 @@ extern int rsa_main(int argc,char *argv[]);
 extern int rsautl_main(int argc,char *argv[]);
 extern int dsa_main(int argc,char *argv[]);
 extern int dsaparam_main(int argc,char *argv[]);
-extern int ec_main(int argc,char *argv[]);
-extern int ecparam_main(int argc,char *argv[]);
 extern int x509_main(int argc,char *argv[]);
 extern int genrsa_main(int argc,char *argv[]);
 extern int gendsa_main(int argc,char *argv[]);
@@ -37,9 +35,7 @@ extern int pkcs8_main(int argc,char *argv[]);
 extern int spkac_main(int argc,char *argv[]);
 extern int smime_main(int argc,char *argv[]);
 extern int rand_main(int argc,char *argv[]);
-#ifndef OPENSSL_NO_ENGINE
 extern int engine_main(int argc,char *argv[]);
-#endif
 extern int ocsp_main(int argc,char *argv[]);
 
 #define FUNC_TYPE_GENERAL	1
@@ -82,12 +78,6 @@ FUNCTION functions[] = {
 #endif
 #ifndef OPENSSL_NO_DSA
 	{FUNC_TYPE_GENERAL,"dsaparam",dsaparam_main},
-#endif
-#ifndef OPENSSL_NO_EC
-	{FUNC_TYPE_GENERAL,"ec",ec_main},
-#endif
-#ifndef OPENSSL_NO_EC
-	{FUNC_TYPE_GENERAL,"ecparam",ecparam_main},
 #endif
 	{FUNC_TYPE_GENERAL,"x509",x509_main},
 #ifndef OPENSSL_NO_RSA
@@ -102,9 +92,7 @@ FUNCTION functions[] = {
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_client",s_client_main},
 #endif
-#ifndef OPENSSL_NO_SPEED
 	{FUNC_TYPE_GENERAL,"speed",speed_main},
-#endif
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_time",s_time_main},
 #endif
@@ -123,9 +111,7 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"spkac",spkac_main},
 	{FUNC_TYPE_GENERAL,"smime",smime_main},
 	{FUNC_TYPE_GENERAL,"rand",rand_main},
-#ifndef OPENSSL_NO_ENGINE
 	{FUNC_TYPE_GENERAL,"engine",engine_main},
-#endif
 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},

apps/progs.pl

@@ -33,8 +33,6 @@ foreach (@ARGV)
 		{ print "#ifndef OPENSSL_NO_RSA\n${str}#endif\n";  }
 	elsif ( ($_ =~ /^dsa$/) || ($_ =~ /^gendsa$/) || ($_ =~ /^dsaparam$/))
 		{ print "#ifndef OPENSSL_NO_DSA\n${str}#endif\n"; }
-	elsif ( ($_ =~ /^ec$/) || ($_ =~ /^ecparam$/))
-		{ print "#ifndef OPENSSL_NO_EC\n${str}#endif\n";}
 	elsif ( ($_ =~ /^dh$/) || ($_ =~ /^gendh$/) || ($_ =~ /^dhparam$/))
 		{ print "#ifndef OPENSSL_NO_DH\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^pkcs12$/))

apps/rand.c

@@ -76,9 +76,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
@@ -86,9 +84,7 @@ int MAIN(int argc, char **argv)
 	int base64 = 0;
 	BIO *out = NULL;
 	int num = -1;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
@@ -110,7 +106,6 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(argv[i], "-engine") == 0)
 			{
 			if ((argv[i+1] != NULL) && (engine == NULL))
@@ -118,7 +113,6 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
-#endif
 		else if (strcmp(argv[i], "-rand") == 0)
 			{
 			if ((argv[i+1] != NULL) && (inrand == NULL))
@@ -156,17 +150,13 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "Usage: rand [options] num\n");
 		BIO_printf(bio_err, "where options are\n");
 		BIO_printf(bio_err, "-out file             - write to file\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err, "-engine e             - use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err, "-base64               - encode output\n");
 		goto err;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 	if (inrand != NULL)
@@ -205,7 +195,7 @@ int MAIN(int argc, char **argv)
 		int chunk;
 
 		chunk = num;
-		if (chunk > (int)sizeof(buf))
+		if (chunk > sizeof buf)
 			chunk = sizeof buf;
 		r = RAND_bytes(buf, chunk);
 		if (r <= 0)
@@ -223,5 +213,5 @@ err:
 	if (out)
 		BIO_free_all(out);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/req.c

@@ -56,12 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -79,7 +73,6 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
-#include "../crypto/cryptlib.h"
 
 #define SECTION		"req"
 
@@ -119,10 +112,9 @@
  *		  require.  This format is wrong
  */
 
-static int make_REQ(X509_REQ *req,EVP_PKEY *pkey,char *dn,int mutlirdn,
-		int attribs,unsigned long chtype);
-static int build_subject(X509_REQ *req, char *subj, unsigned long chtype,
-		int multirdn);
+static int make_REQ(X509_REQ *req,EVP_PKEY *pkey,char *dn,int attribs,
+		unsigned long chtype);
+static int build_subject(X509_REQ *req, char *subj, unsigned long chtype);
 static int prompt_info(X509_REQ *req,
 		STACK_OF(CONF_VALUE) *dn_sk, char *dn_sect,
 		STACK_OF(CONF_VALUE) *attr_sk, char *attr_sect, int attribs,
@@ -134,14 +126,15 @@ static int add_attribute_object(X509_REQ *req, char *text,
 				char *def, char *value, int nid, int n_min,
 				int n_max, unsigned long chtype);
 static int add_DN_object(X509_NAME *n, char *text, char *def, char *value,
-	int nid,int n_min,int n_max, unsigned long chtype, int mval);
+	int nid,int n_min,int n_max, unsigned long chtype);
 #ifndef OPENSSL_NO_RSA
-static int MS_CALLBACK req_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK req_cb(int p,int n,void *arg);
 #endif
 static int req_check_len(int len,int n_min,int n_max);
 static int check_end(char *str, char *end);
 #ifndef MONOLITH
 static char *default_config_file=NULL;
+static CONF *config=NULL;
 #endif
 static CONF *req_conf=NULL;
 static int batch=0;
@@ -149,7 +142,6 @@ static int batch=0;
 #define TYPE_RSA	1
 #define TYPE_DSA	2
 #define TYPE_DH		3
-#define TYPE_EC		4
 
 int MAIN(int, char **);
 
@@ -159,10 +151,7 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_DSA
 	DSA *dsa_params=NULL;
 #endif
-#ifndef OPENSSL_NO_ECDSA
-	EC_KEY *ec_params = NULL;
-#endif
-	unsigned long nmflag = 0, reqflag = 0;
+	unsigned long nmflag = 0;
 	int ex=1,x509=0,days=30;
 	X509 *x509ss=NULL;
 	X509_REQ *req=NULL;
@@ -173,9 +162,7 @@ int MAIN(int argc, char **argv)
 	int informat,outformat,verify=0,noout=0,text=0,keyform=FORMAT_PEM;
 	int nodes=0,kludge=0,newhdr=0,subject=0,pubkey=0;
 	char *infile,*outfile,*prog,*keyfile=NULL,*template=NULL,*keyout=NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 	char *extensions = NULL;
 	char *req_exts = NULL;
 	const EVP_CIPHER *cipher=NULL;
@@ -186,11 +173,10 @@ int MAIN(int argc, char **argv)
 	char *passin = NULL, *passout = NULL;
 	char *p;
 	char *subj = NULL;
-	int multirdn = 0;
 	const EVP_MD *md_alg=NULL,*digest=EVP_md5();
 	unsigned long chtype = MBSTRING_ASC;
 #ifndef MONOLITH
-	char *to_free;
+	MS_STATIC char config_name[256];
 	long errline;
 #endif
 
@@ -224,13 +210,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outformat=str2fmt(*(++argv));
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-key") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -334,59 +318,11 @@ int MAIN(int argc, char **argv)
 						}
 					}
 				BIO_free(in);
-				in=NULL;
 				newkey=BN_num_bits(dsa_params->p);
+				in=NULL;
 				}
 			else 
 #endif
-#ifndef OPENSSL_NO_ECDSA
-				if (strncmp("ec:",p,3) == 0)
-				{
-				X509 *xtmp=NULL;
-				EVP_PKEY *dtmp;
-
-				pkey_type=TYPE_EC;
-				p+=3;
-				if ((in=BIO_new_file(p,"r")) == NULL)
-					{
-					perror(p);
-					goto end;
-					}
-				if ((ec_params = EC_KEY_new()) == NULL)
-					goto end;
-				if ((ec_params->group = PEM_read_bio_ECPKParameters(in, NULL, NULL, NULL)) == NULL)
-					{
-					if (ec_params)
-						EC_KEY_free(ec_params);
-					ERR_clear_error();
-					(void)BIO_reset(in);
-					if ((xtmp=PEM_read_bio_X509(in,NULL,NULL,NULL)) == NULL)
-						{	
-						BIO_printf(bio_err,"unable to load EC parameters from file\n");
-						goto end;
-						}
-
-					if ((dtmp=X509_get_pubkey(xtmp))==NULL)
-						goto end;
-					if (dtmp->type == EVP_PKEY_EC)
-						ec_params = ECParameters_dup(dtmp->pkey.eckey);
-					EVP_PKEY_free(dtmp);
-					X509_free(xtmp);
-					if (ec_params == NULL)
-						{
-						BIO_printf(bio_err,"Certificate does not contain EC parameters\n");
-						goto end;
-						}
-					}
-
-				BIO_free(in);
-				in=NULL;
-				
-				newkey = EC_GROUP_get_degree(ec_params->group);
-
-				}
-			else
-#endif
 #ifndef OPENSSL_NO_DH
 				if (strncmp("dh:",p,4) == 0)
 				{
@@ -395,9 +331,7 @@ int MAIN(int argc, char **argv)
 				}
 			else
 #endif
-				{
-				goto bad;
-				}
+				pkey_type=TYPE_RSA;
 
 			newreq=1;
 			}
@@ -422,11 +356,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
 			}
-		else if (strcmp(*argv,"-reqopt") == 0)
-			{
-			if (--argc < 1) goto bad;
-			if (!set_cert_ex(&reqflag, *(++argv))) goto bad;
-			}
 		else if (strcmp(*argv,"-subject") == 0)
 			subject=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -442,8 +371,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			subj= *(++argv);
 			}
-		else if (strcmp(*argv,"-multivalue-rdn") == 0)
-			multirdn=1;
 		else if (strcmp(*argv,"-days") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -496,9 +423,7 @@ bad:
 		BIO_printf(bio_err," -verify        verify signature on REQ\n");
 		BIO_printf(bio_err," -modulus       RSA modulus\n");
 		BIO_printf(bio_err," -nodes         don't encrypt the output key\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device\n");
-#endif
 		BIO_printf(bio_err," -subject       output the request's subject\n");
 		BIO_printf(bio_err," -passin        private key password source\n");
 		BIO_printf(bio_err," -key file      use the private key contained in file\n");
@@ -509,13 +434,9 @@ bad:
 		BIO_printf(bio_err,"                the random number generator\n");
 		BIO_printf(bio_err," -newkey rsa:bits generate a new RSA key of 'bits' in size\n");
 		BIO_printf(bio_err," -newkey dsa:file generate a new DSA key, parameters taken from CA in 'file'\n");
-#ifndef OPENSSL_NO_ECDSA
-		BIO_printf(bio_err," -newkey ec:file generate a new EC key, parameters taken from CA in 'file'\n");
-#endif
 		BIO_printf(bio_err," -[digest]      Digest to sign with (md5, sha1, md2, mdc2, md4)\n");
 		BIO_printf(bio_err," -config file   request template file.\n");
 		BIO_printf(bio_err," -subj arg      set or modify request subject\n");
-		BIO_printf(bio_err," -multivalue-rdn enable support for multivalued RDNs\n");
 		BIO_printf(bio_err," -new           new request.\n");
 		BIO_printf(bio_err," -batch         do not ask anything during request generation\n");
 		BIO_printf(bio_err," -x509          output a x509 structure instead of a cert. req.\n");
@@ -528,7 +449,6 @@ bad:
 		BIO_printf(bio_err," -reqexts ..    specify request extension section (override value in config file)\n");
 		BIO_printf(bio_err," -utf8          input characters are UTF8 (default ASCII)\n");
 		BIO_printf(bio_err," -nameopt arg    - various certificate name options\n");
-		BIO_printf(bio_err," -reqopt arg    - various request text options\n\n");
 		goto end;
 		}
 
@@ -544,7 +464,14 @@ bad:
 	if (p == NULL)
 		p=getenv("SSLEAY_CONF");
 	if (p == NULL)
-		p=to_free=make_config_name();
+		{
+		strcpy(config_name,X509_get_default_cert_area());
+#ifndef OPENSSL_SYS_VMS
+		strcat(config_name,"/");
+#endif
+		strcat(config_name,OPENSSL_CONF);
+		p=config_name;
+		}
 	default_config_file=p;
 	config=NCONF_new(NULL);
 	i=NCONF_load(config, p, &errline);
@@ -552,7 +479,7 @@ bad:
 
 	if (template != NULL)
 		{
-		long errline = -1;
+		long errline;
 
 		if( verbose )
 			BIO_printf(bio_err,"Using configuration from %s\n",template);
@@ -691,13 +618,11 @@ bad:
 	if ((in == NULL) || (out == NULL))
 		goto end;
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if (keyfile != NULL)
 		{
-		pkey = load_key(bio_err, keyfile, keyform, 0, passin, e,
+		pkey = load_key(bio_err, keyfile, keyform, passin, e,
 			"Private Key");
 		if (!pkey)
 			{
@@ -705,8 +630,7 @@ bad:
 			   message */
 			goto end;
 			}
-		if (EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA || 
-			EVP_PKEY_type(pkey->type) == EVP_PKEY_EC)
+		if (EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA)
 			{
 			char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 			if (randfile == NULL)
@@ -717,7 +641,6 @@ bad:
 
 	if (newreq && (pkey == NULL))
 		{
-		BN_GENCB cb;
 		char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 		if (randfile == NULL)
 			ERR_clear_error();
@@ -731,29 +654,24 @@ bad:
 				newkey=DEFAULT_KEY_LENGTH;
 			}
 
-		if (newkey < MIN_KEY_LENGTH && (pkey_type == TYPE_RSA || pkey_type == TYPE_DSA))
+		if (newkey < MIN_KEY_LENGTH)
 			{
 			BIO_printf(bio_err,"private key length is too short,\n");
-			BIO_printf(bio_err,"it needs to be at least %d bits, not %ld\n",MIN_KEY_LENGTH,newkey);
+			BIO_printf(bio_err,"it needs to be at least %d bits, not %d\n",MIN_KEY_LENGTH,newkey);
 			goto end;
 			}
-		BIO_printf(bio_err,"Generating a %ld bit %s private key\n",
-			newkey,(pkey_type == TYPE_RSA)?"RSA":
-			(pkey_type == TYPE_DSA)?"DSA":"EC");
+		BIO_printf(bio_err,"Generating a %d bit %s private key\n",
+			newkey,(pkey_type == TYPE_RSA)?"RSA":"DSA");
 
 		if ((pkey=EVP_PKEY_new()) == NULL) goto end;
 
 #ifndef OPENSSL_NO_RSA
-		BN_GENCB_set(&cb, req_cb, bio_err);
 		if (pkey_type == TYPE_RSA)
 			{
-			RSA *rsa = RSA_new();
-			if(!rsa || !RSA_generate_key_ex(rsa, newkey, 0x10001, &cb) ||
-					!EVP_PKEY_assign_RSA(pkey, rsa))
-				{
-				if(rsa) RSA_free(rsa);
+			if (!EVP_PKEY_assign_RSA(pkey,
+				RSA_generate_key(newkey,0x10001,
+					req_cb,bio_err)))
 				goto end;
-				}
 			}
 		else
 #endif
@@ -765,15 +683,6 @@ bad:
 			dsa_params=NULL;
 			}
 #endif
-#ifndef OPENSSL_NO_ECDSA
-			if (pkey_type == TYPE_EC)
-			{
-			if (!EC_KEY_generate_key(ec_params)) goto end;
-			if (!EVP_PKEY_assign_EC_KEY(pkey, ec_params)) 
-				goto end;
-			ec_params = NULL;
-			}
-#endif
 
 		app_RAND_write_file(randfile, bio_err);
 
@@ -879,10 +788,6 @@ loop:
 #ifndef OPENSSL_NO_DSA
 		if (pkey->type == EVP_PKEY_DSA)
 			digest=EVP_dss1();
-#endif
-#ifndef OPENSSL_NO_ECDSA
-		if (pkey->type == EVP_PKEY_EC)
-			digest=EVP_ecdsa();
 #endif
 		if (req == NULL)
 			{
@@ -892,7 +797,7 @@ loop:
 				goto end;
 				}
 
-			i=make_REQ(req,pkey,subj,multirdn,!x509, chtype);
+			i=make_REQ(req,pkey,subj,!x509, chtype);
 			subj=NULL; /* done processing '-subj' option */
 			if ((kludge > 0) && !sk_X509_ATTRIBUTE_num(req->req_info->attributes))
 				{
@@ -912,7 +817,7 @@ loop:
 			if ((x509ss=X509_new()) == NULL) goto end;
 
 			/* Set version to V3 */
-			if(extensions && !X509_set_version(x509ss, 2)) goto end;
+			if(!X509_set_version(x509ss, 2)) goto end;
 			if (serial)
 				{
 				if (!X509_set_serialNumber(x509ss, serial)) goto end;
@@ -985,7 +890,7 @@ loop:
 			print_name(bio_err, "old subject=", X509_REQ_get_subject_name(req), nmflag);
 			}
 
-		if (build_subject(req, subj, chtype, multirdn) == 0)
+		if (build_subject(req, subj, chtype) == 0)
 			{
 			BIO_printf(bio_err, "ERROR: cannot modify subject\n");
 			ex=1;
@@ -1076,9 +981,9 @@ loop:
 	if (text)
 		{
 		if (x509)
-			X509_print_ex(out, x509ss, nmflag, reqflag);
+			X509_print(out,x509ss);
 		else	
-			X509_REQ_print_ex(out, req, nmflag, reqflag);
+			X509_REQ_print(out,req);
 		}
 
 	if(subject) 
@@ -1148,10 +1053,6 @@ loop:
 		}
 	ex=0;
 end:
-#ifndef MONOLITH
-	if(to_free)
-		OPENSSL_free(to_free);
-#endif
 	if (ex)
 		{
 		ERR_print_errors(bio_err);
@@ -1168,16 +1069,13 @@ end:
 	OBJ_cleanup();
 #ifndef OPENSSL_NO_DSA
 	if (dsa_params != NULL) DSA_free(dsa_params);
-#endif
-#ifndef OPENSSL_NO_ECDSA
-	if (ec_params != NULL) EC_KEY_free(ec_params);
 #endif
 	apps_shutdown();
-	OPENSSL_EXIT(ex);
+	EXIT(ex);
 	}
 
-static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int multirdn,
-			int attribs, unsigned long chtype)
+static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
+			unsigned long chtype)
 	{
 	int ret=0,i;
 	char no_prompt = 0;
@@ -1227,7 +1125,7 @@ static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int multirdn,
 	else 
 		{
 		if (subj)
-			i = build_subject(req, subj, chtype, multirdn);
+			i = build_subject(req, subj, chtype);
 		else
 			i = prompt_info(req, dn_sk, dn_sect, attr_sk, attr_sect, attribs, chtype);
 		}
@@ -1244,11 +1142,11 @@ err:
  * subject is expected to be in the format /type0=value0/type1=value1/type2=...
  * where characters may be escaped by \
  */
-static int build_subject(X509_REQ *req, char *subject, unsigned long chtype, int multirdn)
+static int build_subject(X509_REQ *req, char *subject, unsigned long chtype)
 	{
 	X509_NAME *n;
 
-	if (!(n = parse_name(subject, chtype, multirdn)))
+	if (!(n = do_subject(subject, chtype)))
 		return 0;
 
 	if (!X509_REQ_set_subject_name(req, n))
@@ -1269,7 +1167,7 @@ static int prompt_info(X509_REQ *req,
 	int i;
 	char *p,*q;
 	char buf[100];
-	int nid, mval;
+	int nid;
 	long n_min,n_max;
 	char *type,*def,*value;
 	CONF_VALUE *v;
@@ -1312,51 +1210,32 @@ start:		for (;;)
 					if(*p) type = p;
 					break;
 				}
-			if (*type == '+')
-				{
-				mval = -1;
-				type++;
-				}
-			else
-				mval = 0;
 			/* If OBJ not recognised ignore it */
 			if ((nid=OBJ_txt2nid(type)) == NID_undef) goto start;
-			if (BIO_snprintf(buf,sizeof buf,"%s_default",v->name)
-				>= (int)sizeof(buf))
-			   {
-			   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
-			   return 0;
-			   }
-
+			sprintf(buf,"%s_default",v->name);
 			if ((def=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
 				ERR_clear_error();
 				def="";
 				}
 				
-			BIO_snprintf(buf,sizeof buf,"%s_value",v->name);
+			sprintf(buf,"%s_value",v->name);
 			if ((value=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
 				ERR_clear_error();
 				value=NULL;
 				}
 
-			BIO_snprintf(buf,sizeof buf,"%s_min",v->name);
+			sprintf(buf,"%s_min",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_min))
-				{
-				ERR_clear_error();
 				n_min = -1;
-				}
 
-			BIO_snprintf(buf,sizeof buf,"%s_max",v->name);
+			sprintf(buf,"%s_max",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_max))
-				{
-				ERR_clear_error();
 				n_max = -1;
-				}
 
 			if (!add_DN_object(subj,v->value,def,value,nid,
-				n_min,n_max, chtype, mval))
+				n_min,n_max, chtype))
 				return 0;
 			}
 		if (X509_NAME_entry_count(subj) == 0)
@@ -1386,13 +1265,7 @@ start2:			for (;;)
 				if ((nid=OBJ_txt2nid(type)) == NID_undef)
 					goto start2;
 
-				if (BIO_snprintf(buf,sizeof buf,"%s_default",type)
-					>= (int)sizeof(buf))
-				   {
-				   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
-				   return 0;
-				   }
-
+				sprintf(buf,"%s_default",type);
 				if ((def=NCONF_get_string(req_conf,attr_sect,buf))
 					== NULL)
 					{
@@ -1401,7 +1274,7 @@ start2:			for (;;)
 					}
 				
 				
-				BIO_snprintf(buf,sizeof buf,"%s_value",type);
+				sprintf(buf,"%s_value",type);
 				if ((value=NCONF_get_string(req_conf,attr_sect,buf))
 					== NULL)
 					{
@@ -1409,11 +1282,11 @@ start2:			for (;;)
 					value=NULL;
 					}
 
-				BIO_snprintf(buf,sizeof buf,"%s_min",type);
+				sprintf(buf,"%s_min",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_min))
 					n_min = -1;
 
-				BIO_snprintf(buf,sizeof buf,"%s_max",type);
+				sprintf(buf,"%s_max",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_max))
 					n_max = -1;
 
@@ -1446,7 +1319,6 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,
 
 	for (i = 0; i < sk_CONF_VALUE_num(dn_sk); i++)
 		{
-		int mval;
 		v=sk_CONF_VALUE_value(dn_sk,i);
 		p=q=NULL;
 		type=v->name;
@@ -1463,19 +1335,8 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,
 				if(*p) type = p;
 				break;
 			}
-#ifndef CHARSET_EBCDIC
-		if (*p == '+')
-#else
-		if (*p == os_toascii['+'])
-#endif
-			{
-			p++;
-			mval = -1;
-			}
-		else
-			mval = 0;
 		if (!X509_NAME_add_entry_by_txt(subj,type, chtype,
-				(unsigned char *) v->value,-1,-1,mval)) return 0;
+				(unsigned char *) v->value,-1,-1,0)) return 0;
 
 		}
 
@@ -1498,7 +1359,7 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,
 
 
 static int add_DN_object(X509_NAME *n, char *text, char *def, char *value,
-	     int nid, int n_min, int n_max, unsigned long chtype, int mval)
+	     int nid, int n_min, int n_max, unsigned long chtype)
 	{
 	int i,ret=0;
 	MS_STATIC char buf[1024];
@@ -1507,8 +1368,8 @@ start:
 	(void)BIO_flush(bio_err);
 	if(value != NULL)
 		{
-		BUF_strlcpy(buf,value,sizeof buf);
-		BUF_strlcat(buf,"\n",sizeof buf);
+		strcpy(buf,value);
+		strcat(buf,"\n");
 		BIO_printf(bio_err,"%s\n",value);
 		}
 	else
@@ -1516,7 +1377,7 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			fgets(buf,sizeof buf,stdin);
+			fgets(buf,1024,stdin);
 			}
 		else
 			{
@@ -1530,8 +1391,8 @@ start:
 		{
 		if ((def == NULL) || (def[0] == '\0'))
 			return(1);
-		BUF_strlcpy(buf,def,sizeof buf);
-		BUF_strlcat(buf,"\n",sizeof buf);
+		strcpy(buf,def);
+		strcat(buf,"\n");
 		}
 	else if ((buf[0] == '.') && (buf[1] == '\n')) return(1);
 
@@ -1547,7 +1408,7 @@ start:
 #endif
 	if(!req_check_len(i, n_min, n_max)) goto start;
 	if (!X509_NAME_add_entry_by_NID(n,nid, chtype,
-				(unsigned char *) buf, -1,-1,mval)) goto err;
+				(unsigned char *) buf, -1,-1,0)) goto err;
 	ret=1;
 err:
 	return(ret);
@@ -1565,8 +1426,8 @@ start:
 	(void)BIO_flush(bio_err);
 	if (value != NULL)
 		{
-		BUF_strlcpy(buf,value,sizeof buf);
-		BUF_strlcat(buf,"\n",sizeof buf);
+		strcpy(buf,value);
+		strcat(buf,"\n");
 		BIO_printf(bio_err,"%s\n",value);
 		}
 	else
@@ -1574,7 +1435,7 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			fgets(buf,sizeof buf,stdin);
+			fgets(buf,1024,stdin);
 			}
 		else
 			{
@@ -1588,8 +1449,8 @@ start:
 		{
 		if ((def == NULL) || (def[0] == '\0'))
 			return(1);
-		BUF_strlcpy(buf,def,sizeof buf);
-		BUF_strlcat(buf,"\n",sizeof buf);
+		strcpy(buf,def);
+		strcat(buf,"\n");
 		}
 	else if ((buf[0] == '.') && (buf[1] == '\n')) return(1);
 
@@ -1618,7 +1479,7 @@ err:
 	}
 
 #ifndef OPENSSL_NO_RSA
-static int MS_CALLBACK req_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK req_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -1626,12 +1487,11 @@ static int MS_CALLBACK req_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
 #endif
 

apps/rsa.c

@@ -104,9 +104,7 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 	int modulus=0;
 
 	apps_startup();
@@ -158,13 +156,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-sgckey") == 0)
 			sgckey=1;
 		else if (strcmp(*argv,"-pubin") == 0)
@@ -216,17 +212,13 @@ bad:
 		BIO_printf(bio_err," -check          verify key consistency\n");
 		BIO_printf(bio_err," -pubin          expect a public key in input file\n");
 		BIO_printf(bio_err," -pubout         output a public key\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-#endif
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -246,12 +238,12 @@ bad:
 		if (pubin)
 			pkey = load_pubkey(bio_err, infile,
 				(informat == FORMAT_NETSCAPE && sgckey ?
-					FORMAT_IISSGC : informat), 1,
+					FORMAT_IISSGC : informat),
 				passin, e, "Public Key");
 		else
 			pkey = load_key(bio_err, infile,
 				(informat == FORMAT_NETSCAPE && sgckey ?
-					FORMAT_IISSGC : informat), 1,
+					FORMAT_IISSGC : informat),
 				passin, e, "Private Key");
 
 		if (pkey != NULL)
@@ -377,7 +369,7 @@ end:
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #else /* !OPENSSL_NO_RSA */
 

apps/rsautl.c

@@ -85,9 +85,7 @@ int MAIN(int argc, char **argv)
 	ENGINE *e = NULL;
 	BIO *in = NULL, *out = NULL;
 	char *infile = NULL, *outfile = NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
-#endif
 	char *keyfile = NULL;
 	char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY;
 	int keyform = FORMAT_PEM;
@@ -97,7 +95,6 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey = NULL;
 	RSA *rsa = NULL;
 	unsigned char *rsa_in = NULL, *rsa_out = NULL, pad;
-	char *passargin = NULL, *passin = NULL;
 	int rsa_inlen, rsa_outlen = 0;
 	int keysize;
 
@@ -125,17 +122,12 @@ int MAIN(int argc, char **argv)
 		} else if(!strcmp(*argv, "-inkey")) {
 			if (--argc < 1) badarg = 1;
 			keyfile = *(++argv);
-		} else if (!strcmp(*argv,"-passin")) {
-			if (--argc < 1) badarg = 1;
-			passargin= *(++argv);
 		} else if (strcmp(*argv,"-keyform") == 0) {
 			if (--argc < 1) badarg = 1;
 			keyform=str2fmt(*(++argv));
-#ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
 			if (--argc < 1) badarg = 1;
 			engine = *(++argv);
-#endif
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
 		} else if(!strcmp(*argv, "-certin")) {
@@ -170,25 +162,19 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
-	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
-		BIO_printf(bio_err, "Error getting password\n");
-		goto end;
-	}
 
 /* FIXME: seed PRNG only if needed */
 	app_RAND_load_file(NULL, bio_err, 0);
 	
 	switch(key_type) {
 		case KEY_PRIVKEY:
-		pkey = load_key(bio_err, keyfile, keyform, 0,
-			passin, e, "Private Key");
+		pkey = load_key(bio_err, keyfile, keyform,
+			NULL, e, "Private Key");
 		break;
 
 		case KEY_PUBKEY:
-		pkey = load_pubkey(bio_err, keyfile, keyform, 0,
+		pkey = load_pubkey(bio_err, keyfile, keyform,
 			NULL, e, "Public Key");
 		break;
 
@@ -298,7 +284,6 @@ int MAIN(int argc, char **argv)
 	BIO_free_all(out);
 	if(rsa_in) OPENSSL_free(rsa_in);
 	if(rsa_out) OPENSSL_free(rsa_out);
-	if(passin) OPENSSL_free(passin);
 	return ret;
 }
 
@@ -320,10 +305,7 @@ static void usage()
 	BIO_printf(bio_err, "-encrypt        encrypt with public key\n");
 	BIO_printf(bio_err, "-decrypt        decrypt with private key\n");
 	BIO_printf(bio_err, "-hexdump        hex dump output\n");
-#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
-	BIO_printf (bio_err, "-passin arg    pass phrase source\n");
-#endif
 
 }
 

apps/s_apps.h

@@ -108,19 +108,10 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
-#if !defined(OPENSSL_SYS_NETWARE)  /* conflicts with winsock2 stuff on netware */
+
 #include <sys/types.h>
-#endif
 #include <openssl/opensslconf.h>
 
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-#include <conio.h>
-#endif
-
-#ifdef OPENSSL_SYS_MSDOS
-#define _kbhit kbhit
-#endif
-
 #if defined(OPENSSL_SYS_VMS) && !defined(FD_SET)
 /* VAX C does not defined fd_set and friends, but it's actually quite simple */
 /* These definitions are borrowed from SOCKETSHR.	/Richard Levitte */

apps/s_cb.c

@@ -134,7 +134,7 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	err=	X509_STORE_CTX_get_error(ctx);
 	depth=	X509_STORE_CTX_get_error_depth(ctx);
 
-	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,sizeof buf);
+	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,256);
 	BIO_printf(bio_err,"depth=%d %s\n",depth,buf);
 	if (!ok)
 		{
@@ -154,7 +154,7 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	switch (ctx->error)
 		{
 	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
-		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,sizeof buf);
+		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,256);
 		BIO_printf(bio_err,"issuer= %s\n",buf);
 		break;
 	case X509_V_ERR_CERT_NOT_YET_VALID:
@@ -239,15 +239,15 @@ long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp, int argi,
 
 	if (cmd == (BIO_CB_READ|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"read from %p [%p] (%d bytes => %ld (0x%lX))\n",
- 			(void *)bio,argp,argi,ret,ret);
+		BIO_printf(out,"read from %08X [%08lX] (%d bytes => %ld (0x%X))\n",
+			bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		return(ret);
 		}
 	else if (cmd == (BIO_CB_WRITE|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"write to %p [%p] (%d bytes => %ld (0x%lX))\n",
-			(void *)bio,argp,argi,ret,ret);
+		BIO_printf(out,"write to %08X [%08lX] (%d bytes => %ld (0x%X))\n",
+			bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		}
 	return(ret);

apps/s_client.c

@@ -136,12 +136,8 @@ typedef unsigned int u_int;
 #include <openssl/rand.h>
 #include "s_apps.h"
 
-#ifdef OPENSSL_SYS_WINCE
-/* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
-#ifdef fileno
-#undef fileno
-#endif
-#define fileno(a) (int)_fileno(a)
+#ifdef OPENSSL_SYS_WINDOWS
+#include <conio.h>
 #endif
 
 
@@ -217,10 +213,8 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
 	BIO_printf(bio_err,"                 for those protocols that support it, where\n");
 	BIO_printf(bio_err,"                 'prot' defines which one to assume.  Currently,\n");
-	BIO_printf(bio_err,"                 only \"smtp\" and \"pop3\" are supported.\n");
-#ifndef OPENSSL_NO_ENGINE
+	BIO_printf(bio_err,"                 only \"smtp\" is supported.\n");
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
-#endif
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 
 	}
@@ -247,16 +241,14 @@ int MAIN(int argc, char **argv)
 	int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
 	SSL_CTX *ctx=NULL;
 	int ret=1,in_init=1,i,nbio_test=0;
-	int starttls_proto = 0;
+	int smtp_starttls = 0;
 	int prexit = 0, vflags = 0;
 	SSL_METHOD *meth=NULL;
 	BIO *sbio;
 	char *inrand=NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
 	ENGINE *e=NULL;
-#endif
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
+#ifdef OPENSSL_SYS_WINDOWS
 	struct timeval tv;
 #endif
 
@@ -411,19 +403,15 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			++argv;
 			if (strcmp(*argv,"smtp") == 0)
-				starttls_proto = 1;
-			else if (strcmp(*argv,"pop3") == 0)
-				starttls_proto = 2;
+				smtp_starttls = 1;
 			else
 				goto bad;
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if	(strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id = *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -445,13 +433,6 @@ bad:
 		goto end;
 		}
 
-	OpenSSL_add_ssl_algorithms();
-	SSL_load_error_strings();
-
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine_id, 1);
-#endif
-
 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
 		{
@@ -474,6 +455,11 @@ bad:
 			}
 		}
 
+	OpenSSL_add_ssl_algorithms();
+	SSL_load_error_strings();
+
+        e = setup_engine(bio_err, engine_id, 1);
+
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL)
 		{
@@ -585,18 +571,12 @@ re_start:
 	sbuf_off=0;
 
 	/* This is an ugly hack that does a lot of assumptions */
-	if (starttls_proto == 1)
+	if (smtp_starttls)
 		{
 		BIO_read(sbio,mbuf,BUFSIZZ);
 		BIO_printf(sbio,"STARTTLS\r\n");
 		BIO_read(sbio,sbuf,BUFSIZZ);
 		}
-	if (starttls_proto == 2)
-		{
-		BIO_read(sbio,mbuf,BUFSIZZ);
-		BIO_printf(sbio,"STLS\r\n");
-		BIO_read(sbio,sbuf,BUFSIZZ);
-		}
 
 	for (;;)
 		{
@@ -617,11 +597,11 @@ re_start:
 				print_stuff(bio_c_out,con,full_log);
 				if (full_log > 0) full_log--;
 
-				if (starttls_proto)
+				if (smtp_starttls)
 					{
 					BIO_printf(bio_err,"%s",mbuf);
 					/* We don't need to know any more */
-					starttls_proto = 0;
+					smtp_starttls = 0;
 					}
 
 				if (reconnect)
@@ -640,7 +620,7 @@ re_start:
 
 		if (!ssl_pending)
 			{
-#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
+#ifndef OPENSSL_SYS_WINDOWS
 			if (tty_on)
 				{
 				if (read_tty)  FD_SET(fileno(stdin),&readfds);
@@ -667,8 +647,8 @@ re_start:
 			 * will choke the compiler: if you do have a cast then
 			 * you can either go for (int *) or (void *).
 			 */
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-                        /* Under Windows/DOS we make the assumption that we can
+#ifdef OPENSSL_SYS_WINDOWS
+			/* Under Windows we make the assumption that we can
 			 * always write to the tty: therefore if we need to
 			 * write to the tty we just fall through. Otherwise
 			 * we timeout the select every second and see if there
@@ -682,11 +662,7 @@ re_start:
 					tv.tv_usec = 0;
 					i=select(width,(void *)&readfds,(void *)&writefds,
 						 NULL,&tv);
-#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
-					if(!i && (!_kbhit() || !read_tty) ) continue;
-#else
 					if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
-#endif
 				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
 					 NULL,NULL);
 			}
@@ -770,8 +746,8 @@ re_start:
 				goto shut;
 				}
 			}
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
-		/* Assume Windows/DOS can always write */
+#ifdef OPENSSL_SYS_WINDOWS
+		/* Assume Windows can always write */
 		else if (!ssl_pending && write_tty)
 #else
 		else if (!ssl_pending && FD_ISSET(fileno(stdout),&writefds))
@@ -851,14 +827,8 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				}
 			}
 
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
-		else if (_kbhit())
-#else
+#ifdef OPENSSL_SYS_WINDOWS
 		else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
-#endif
-#elif defined (OPENSSL_SYS_NETWARE)
-        else if (_kbhit())
 #else
 		else if (FD_ISSET(fileno(stdin),&readfds))
 #endif
@@ -922,16 +892,16 @@ end:
 	if (con != NULL) SSL_free(con);
 	if (con2 != NULL) SSL_free(con2);
 	if (ctx != NULL) SSL_CTX_free(ctx);
-	if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
-	if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
-	if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
+	if (cbuf != NULL) { memset(cbuf,0,BUFSIZZ); OPENSSL_free(cbuf); }
+	if (sbuf != NULL) { memset(sbuf,0,BUFSIZZ); OPENSSL_free(sbuf); }
+	if (mbuf != NULL) { memset(mbuf,0,BUFSIZZ); OPENSSL_free(mbuf); }
 	if (bio_c_out != NULL)
 		{
 		BIO_free(bio_c_out);
 		bio_c_out=NULL;
 		}
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 
@@ -946,7 +916,6 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 	SSL_CIPHER *c;
 	X509_NAME *xn;
 	int j,i;
-	const COMP_METHOD *comp, *expansion;
 
 	if (full)
 		{
@@ -961,10 +930,10 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			for (i=0; i<sk_X509_num(sk); i++)
 				{
 				X509_NAME_oneline(X509_get_subject_name(
-					sk_X509_value(sk,i)),buf,sizeof buf);
+					sk_X509_value(sk,i)),buf,BUFSIZ);
 				BIO_printf(bio,"%2d s:%s\n",i,buf);
 				X509_NAME_oneline(X509_get_issuer_name(
-					sk_X509_value(sk,i)),buf,sizeof buf);
+					sk_X509_value(sk,i)),buf,BUFSIZ);
 				BIO_printf(bio,"   i:%s\n",buf);
 				if (c_showcerts)
 					PEM_write_bio_X509(bio,sk_X509_value(sk,i));
@@ -979,10 +948,10 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			if (!(c_showcerts && got_a_chain)) /* Redundant if we showed the whole chain */
 				PEM_write_bio_X509(bio,peer);
 			X509_NAME_oneline(X509_get_subject_name(peer),
-				buf,sizeof buf);
+				buf,BUFSIZ);
 			BIO_printf(bio,"subject=%s\n",buf);
 			X509_NAME_oneline(X509_get_issuer_name(peer),
-				buf,sizeof buf);
+				buf,BUFSIZ);
 			BIO_printf(bio,"issuer=%s\n",buf);
 			}
 		else
@@ -1004,7 +973,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			{
 			BIO_printf(bio,"---\nNo client certificate CA names sent\n");
 			}
-		p=SSL_get_shared_ciphers(s,buf,sizeof buf);
+		p=SSL_get_shared_ciphers(s,buf,BUFSIZ);
 		if (p != NULL)
 			{
 			/* This works only for SSL 2.  In later protocol
@@ -1049,12 +1018,6 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 							 EVP_PKEY_bits(pktmp));
 		EVP_PKEY_free(pktmp);
 	}
-	comp=SSL_get_current_compression(s);
-	expansion=SSL_get_current_expansion(s);
-	BIO_printf(bio,"Compression: %s\n",
-		comp ? SSL_COMP_get_name(comp) : "NONE");
-	BIO_printf(bio,"Expansion: %s\n",
-		expansion ? SSL_COMP_get_name(expansion) : "NONE");
 	SSL_SESSION_print(bio,SSL_get_session(s));
 	BIO_printf(bio,"---\n");
 	if (peer != NULL)

apps/s_server.c

@@ -108,33 +108,18 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECC cipher suite support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
 
 #include <assert.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-
+#include <sys/types.h>
 #include <sys/stat.h>
 #include <openssl/e_os2.h>
 #ifdef OPENSSL_NO_STDIO
 #define APPS_WIN16
 #endif
 
-#if !defined(OPENSSL_SYS_NETWARE)  /* conflicts with winsock2 stuff on netware */
-#include <sys/types.h>
-#endif
-
 /* With IPv6, it looks like Digital has mixed up the proper order of
    recursive header file inclusion, resulting in the compiler complaining
    that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
@@ -155,12 +140,8 @@ typedef unsigned int u_int;
 #include <openssl/rand.h>
 #include "s_apps.h"
 
-#ifdef OPENSSL_SYS_WINCE
-/* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
-#ifdef fileno
-#undef fileno
-#endif
-#define fileno(a) (int)_fileno(a)
+#ifdef OPENSSL_SYS_WINDOWS
+#include <conio.h>
 #endif
 
 #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
@@ -183,7 +164,6 @@ static int generate_session_id(const SSL *ssl, unsigned char *id,
 static DH *load_dh_param(char *dhfile);
 static DH *get_dh512(void);
 #endif
-
 #ifdef MONOLITH
 static void s_server_init(void);
 #endif
@@ -222,7 +202,6 @@ static DH *get_dh512(void)
 	}
 #endif
 
-
 /* static int load_CA(SSL_CTX *ctx, char *file);*/
 
 #undef BUFSIZZ
@@ -255,9 +234,7 @@ static int s_msg=0;
 static int s_quiet=0;
 
 static int hack=0;
-#ifndef OPENSSL_NO_ENGINE
 static char *engine_id=NULL;
-#endif
 static const char *session_id_prefix=NULL;
 
 #ifdef MONOLITH
@@ -282,9 +259,7 @@ static void s_server_init(void)
 	s_msg=0;
 	s_quiet=0;
 	hack=0;
-#ifndef OPENSSL_NO_ENGINE
 	engine_id=NULL;
-#endif
 	}
 #endif
 
@@ -304,11 +279,6 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -dkey arg     - second private key file to use (usually for DSA)\n");
 	BIO_printf(bio_err," -dhparam arg  - DH parameter file to use, in cert file if not specified\n");
 	BIO_printf(bio_err,"                 or a default set of parameters is used\n");
-#ifndef OPENSSL_NO_ECDH
-	BIO_printf(bio_err," -named_curve arg  - Elliptic curve name to use for ephemeral ECDH keys.\n" \
-	                   "                 Use \"openssl ecparam -list_curves\" for all names\n" \
-	                   "                 (default is sect163r2).\n");
-#endif
 #ifdef FIONBIO
 	BIO_printf(bio_err," -nbio         - Run with non-blocking IO\n");
 #endif
@@ -332,18 +302,13 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -no_tls1      - Just disable TLSv1\n");
 #ifndef OPENSSL_NO_DH
 	BIO_printf(bio_err," -no_dhe       - Disable ephemeral DH\n");
-#endif
-#ifndef OPENSSL_NO_ECDH
-	BIO_printf(bio_err," -no_ecdhe     - Disable ephemeral ECDH\n");
 #endif
 	BIO_printf(bio_err," -bugs         - Turn on SSL bug compatibility\n");
 	BIO_printf(bio_err," -www          - Respond to a 'GET /' with a status page\n");
 	BIO_printf(bio_err," -WWW          - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
 	BIO_printf(bio_err," -HTTP         - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
         BIO_printf(bio_err,"                 with the assumption it contains a complete HTTP response.\n");
-#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
-#endif
 	BIO_printf(bio_err," -id_prefix arg - Generate SSL/TLS session IDs prefixed by 'arg'\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	}
@@ -355,10 +320,10 @@ static char **local_argv;
 static int ebcdic_new(BIO *bi);
 static int ebcdic_free(BIO *a);
 static int ebcdic_read(BIO *b, char *out, int outl);
-static int ebcdic_write(BIO *b, const char *in, int inl);
-static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr);
+static int ebcdic_write(BIO *b, char *in, int inl);
+static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr);
 static int ebcdic_gets(BIO *bp, char *buf, int size);
-static int ebcdic_puts(BIO *bp, const char *str);
+static int ebcdic_puts(BIO *bp, char *str);
 
 #define BIO_TYPE_EBCDIC_FILTER	(18|0x0200)
 static BIO_METHOD methods_ebcdic=
@@ -423,7 +388,7 @@ static int ebcdic_read(BIO *b, char *out, int outl)
 	return(ret);
 }
 
-static int ebcdic_write(BIO *b, const char *in, int inl)
+static int ebcdic_write(BIO *b, char *in, int inl)
 {
 	EBCDIC_OUTBUFF *wbuf;
 	int ret=0;
@@ -456,7 +421,7 @@ static int ebcdic_write(BIO *b, const char *in, int inl)
 	return(ret);
 }
 
-static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr)
+static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr)
 {
 	long ret;
 
@@ -475,7 +440,7 @@ static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr)
 
 static int ebcdic_gets(BIO *bp, char *buf, int size)
 {
-	int i, ret=0;
+	int i, ret;
 	if (bp->next_bio == NULL) return(0);
 /*	return(BIO_gets(bp->next_bio,buf,size));*/
 	for (i=0; i<size-1; ++i)
@@ -494,7 +459,7 @@ static int ebcdic_gets(BIO *bp, char *buf, int size)
 	return (ret < 0 && i == 0) ? ret : i;
 }
 
-static int ebcdic_puts(BIO *bp, const char *str)
+static int ebcdic_puts(BIO *bp, char *str)
 {
 	if (bp->next_bio == NULL) return(0);
 	return ebcdic_write(bp, str, strlen(str));
@@ -511,16 +476,13 @@ int MAIN(int argc, char *argv[])
 	char *CApath=NULL,*CAfile=NULL;
 	char *context = NULL;
 	char *dhfile = NULL;
-	char *named_curve = NULL;
 	int badop=0,bugs=0;
 	int ret=1;
 	int off=0;
-	int no_tmp_rsa=0,no_dhe=0,no_ecdhe=0,nocert=0;
+	int no_tmp_rsa=0,no_dhe=0,nocert=0;
 	int state=0;
 	SSL_METHOD *meth=NULL;
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e=NULL;
-#endif
 	char *inrand=NULL;
 
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
@@ -598,13 +560,6 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			dhfile = *(++argv);
 			}
-#ifndef OPENSSL_NO_ECDH		
-		else if	(strcmp(*argv,"-named_curve") == 0)
-			{
-			if (--argc < 1) goto bad;
-			named_curve = *(++argv);
-			}
-#endif
 		else if	(strcmp(*argv,"-dcert") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -673,8 +628,6 @@ int MAIN(int argc, char *argv[])
 			{ no_tmp_rsa=1; }
 		else if	(strcmp(*argv,"-no_dhe") == 0)
 			{ no_dhe=1; }
-		else if	(strcmp(*argv,"-no_ecdhe") == 0)
-			{ no_ecdhe=1; }
 		else if	(strcmp(*argv,"-www") == 0)
 			{ www=1; }
 		else if	(strcmp(*argv,"-WWW") == 0)
@@ -704,13 +657,11 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			session_id_prefix = *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -732,13 +683,6 @@ bad:
 		goto end;
 		}
 
-	SSL_load_error_strings();
-	OpenSSL_add_ssl_algorithms();
-
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine_id, 1);
-#endif
-
 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
 		{
@@ -761,7 +705,7 @@ bad:
 			}
 		}
 
-#if !defined(OPENSSL_NO_RSA) || !defined(OPENSSL_NO_DSA) || !defined(OPENSSL_NO_ECDSA)
+#if !defined(OPENSSL_NO_RSA) || !defined(OPENSSL_NO_DSA)
 	if (nocert)
 #endif
 		{
@@ -771,6 +715,11 @@ bad:
 		s_dkey_file=NULL;
 		}
 
+	SSL_load_error_strings();
+	OpenSSL_add_ssl_algorithms();
+
+        e = setup_engine(bio_err, engine_id, 1);
+
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL)
 		{
@@ -849,59 +798,6 @@ bad:
 		DH_free(dh);
 		}
 #endif
-
-#ifndef OPENSSL_NO_ECDH
-	if (!no_ecdhe)
-		{
-		EC_KEY *ecdh=NULL;
-
-		ecdh = EC_KEY_new();
-		if (ecdh == NULL)
-			{
-			BIO_printf(bio_err,"Could not create ECDH struct.\n");
-			goto end;
-			}
-
-		if (named_curve)
-			{
-			int nid = OBJ_sn2nid(named_curve);
-
-			if (nid == 0)
-				{
-				BIO_printf(bio_err, "unknown curve name (%s)\n", 
-					named_curve);
-				goto end;
-				}
-
-			ecdh->group = EC_GROUP_new_by_nid(nid);
-			if (ecdh->group == NULL)
-				{
-				BIO_printf(bio_err, "unable to create curve (%s)\n", 
-					named_curve);
-				goto end;
-				}
-			}
-
-		if (ecdh->group != NULL)
-			{
-			BIO_printf(bio_s_out,"Setting temp ECDH parameters\n");
-			}
-		else
-			{
-			BIO_printf(bio_s_out,"Using default temp ECDH parameters\n");
-			ecdh->group=EC_GROUP_new_by_nid(NID_sect163r2);
-			if (ecdh->group == NULL) 
-				{
-				BIO_printf(bio_err, "unable to create curve (sect163r2)\n");
-				goto end;
-				}
-			}
-		(void)BIO_flush(bio_s_out);
-
-		SSL_CTX_set_tmp_ecdh(ctx,ecdh);
-		EC_KEY_free(ecdh);
-		}
-#endif
 	
 	if (!set_cert_stuff(ctx,s_cert_file,s_key_file))
 		goto end;
@@ -964,30 +860,30 @@ end:
 		bio_s_out=NULL;
 		}
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static void print_stats(BIO *bio, SSL_CTX *ssl_ctx)
 	{
 	BIO_printf(bio,"%4ld items in the session cache\n",
 		SSL_CTX_sess_number(ssl_ctx));
-	BIO_printf(bio,"%4ld client connects (SSL_connect())\n",
+	BIO_printf(bio,"%4d client connects (SSL_connect())\n",
 		SSL_CTX_sess_connect(ssl_ctx));
-	BIO_printf(bio,"%4ld client renegotiates (SSL_connect())\n",
+	BIO_printf(bio,"%4d client renegotiates (SSL_connect())\n",
 		SSL_CTX_sess_connect_renegotiate(ssl_ctx));
-	BIO_printf(bio,"%4ld client connects that finished\n",
+	BIO_printf(bio,"%4d client connects that finished\n",
 		SSL_CTX_sess_connect_good(ssl_ctx));
-	BIO_printf(bio,"%4ld server accepts (SSL_accept())\n",
+	BIO_printf(bio,"%4d server accepts (SSL_accept())\n",
 		SSL_CTX_sess_accept(ssl_ctx));
-	BIO_printf(bio,"%4ld server renegotiates (SSL_accept())\n",
+	BIO_printf(bio,"%4d server renegotiates (SSL_accept())\n",
 		SSL_CTX_sess_accept_renegotiate(ssl_ctx));
-	BIO_printf(bio,"%4ld server accepts that finished\n",
+	BIO_printf(bio,"%4d server accepts that finished\n",
 		SSL_CTX_sess_accept_good(ssl_ctx));
-	BIO_printf(bio,"%4ld session cache hits\n",SSL_CTX_sess_hits(ssl_ctx));
-	BIO_printf(bio,"%4ld session cache misses\n",SSL_CTX_sess_misses(ssl_ctx));
-	BIO_printf(bio,"%4ld session cache timeouts\n",SSL_CTX_sess_timeouts(ssl_ctx));
-	BIO_printf(bio,"%4ld callback cache hits\n",SSL_CTX_sess_cb_hits(ssl_ctx));
-	BIO_printf(bio,"%4ld cache full overflows (%ld allowed)\n",
+	BIO_printf(bio,"%4d session cache hits\n",SSL_CTX_sess_hits(ssl_ctx));
+	BIO_printf(bio,"%4d session cache misses\n",SSL_CTX_sess_misses(ssl_ctx));
+	BIO_printf(bio,"%4d session cache timeouts\n",SSL_CTX_sess_timeouts(ssl_ctx));
+	BIO_printf(bio,"%4d callback cache hits\n",SSL_CTX_sess_cb_hits(ssl_ctx));
+	BIO_printf(bio,"%4d cache full overflows (%d allowed)\n",
 		SSL_CTX_sess_cache_full(ssl_ctx),
 		SSL_CTX_sess_get_cache_size(ssl_ctx));
 	}
@@ -1001,7 +897,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 	unsigned long l;
 	SSL *con=NULL;
 	BIO *sbio;
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
+#ifdef OPENSSL_SYS_WINDOWS
 	struct timeval tv;
 #endif
 
@@ -1075,7 +971,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		if (!read_from_sslcon)
 			{
 			FD_ZERO(&readfds);
-#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
+#ifndef OPENSSL_SYS_WINDOWS
 			FD_SET(fileno(stdin),&readfds);
 #endif
 			FD_SET(s,&readfds);
@@ -1085,8 +981,8 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 			 * the compiler: if you do have a cast then you can either
 			 * go for (int *) or (void *).
 			 */
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
-                        /* Under DOS (non-djgpp) and Windows we can't select on stdin: only
+#ifdef OPENSSL_SYS_WINDOWS
+			/* Under Windows we can't select on stdin: only
 			 * on sockets. As a workaround we timeout the select every
 			 * second and check for any keypress. In a proper Windows
 			 * application we wouldn't do this because it is inefficient.
@@ -1280,7 +1176,7 @@ err:
 	BIO_printf(bio_s_out,"CONNECTION CLOSED\n");
 	if (buf != NULL)
 		{
-		OPENSSL_cleanse(buf,bufsize);
+		memset(buf,0,bufsize);
 		OPENSSL_free(buf);
 		}
 	if (ret >= 0)
@@ -1332,14 +1228,14 @@ static int init_ssl_connection(SSL *con)
 		{
 		BIO_printf(bio_s_out,"Client certificate\n");
 		PEM_write_bio_X509(bio_s_out,peer);
-		X509_NAME_oneline(X509_get_subject_name(peer),buf,sizeof buf);
+		X509_NAME_oneline(X509_get_subject_name(peer),buf,BUFSIZ);
 		BIO_printf(bio_s_out,"subject=%s\n",buf);
-		X509_NAME_oneline(X509_get_issuer_name(peer),buf,sizeof buf);
+		X509_NAME_oneline(X509_get_issuer_name(peer),buf,BUFSIZ);
 		BIO_printf(bio_s_out,"issuer=%s\n",buf);
 		X509_free(peer);
 		}
 
-	if (SSL_get_shared_ciphers(con,buf,sizeof buf) != NULL)
+	if (SSL_get_shared_ciphers(con,buf,BUFSIZ) != NULL)
 		BIO_printf(bio_s_out,"Shared ciphers:%s\n",buf);
 	str=SSL_CIPHER_get_name(SSL_get_current_cipher(con));
 	BIO_printf(bio_s_out,"CIPHER is %s\n",(str != NULL)?str:"(NONE)");
@@ -1347,13 +1243,7 @@ static int init_ssl_connection(SSL *con)
 	if (SSL_ctrl(con,SSL_CTRL_GET_FLAGS,0,NULL) &
 		TLS1_FLAGS_TLS_PADDING_BUG)
 		BIO_printf(bio_s_out,"Peer has incorrect TLSv1 block padding\n");
-#ifndef OPENSSL_NO_KRB5
-	if (con->kssl_ctx->client_princ != NULL)
-		{
-		BIO_printf(bio_s_out,"Kerberos peer principal is %s\n",
-			con->kssl_ctx->client_princ);
-		}
-#endif /* OPENSSL_NO_KRB5 */
+
 	return(1);
 	}
 
@@ -1505,9 +1395,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 			else
 				{
 				BIO_printf(bio_s_out,"read R BLOCK\n");
-#if defined(OPENSSL_SYS_NETWARE)
-            delay(1000);
-#elif !defined(OPENSSL_SYS_MSDOS) && !defined(__DJGPP__)
+#ifndef OPENSSL_SYS_MSDOS
 				sleep(1);
 #endif
 				continue;
@@ -1791,12 +1679,7 @@ static RSA MS_CALLBACK *tmp_rsa_cb(SSL *s, int is_export, int keylength)
 			BIO_printf(bio_err,"Generating temp (%d bit) RSA key...",keylength);
 			(void)BIO_flush(bio_err);
 			}
-		if(((rsa_tmp = RSA_new()) == NULL) || !RSA_generate_key_ex(
-					rsa_tmp, keylength,RSA_F4,NULL))
-			{
-			if(rsa_tmp) RSA_free(rsa_tmp);
-			rsa_tmp = NULL;
-			}
+		rsa_tmp=RSA_generate_key(keylength,RSA_F4,NULL,NULL);
 		if (!s_quiet)
 			{
 			BIO_printf(bio_err,"\n");

apps/s_socket.c

@@ -62,6 +62,8 @@
 #include <errno.h>
 #include <signal.h>
 
+#include <openssl/e_os2.h>
+
 /* With IPv6, it looks like Digital has mixed up the proper order of
    recursive header file inclusion, resulting in the compiler complaining
    that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
@@ -79,19 +81,11 @@ typedef unsigned int u_int;
 #include "s_apps.h"
 #include <openssl/ssl.h>
 
-#ifdef FLAT_INC
-#include "e_os.h"
-#else
-#include "../e_os.h"
-#endif
-
-#ifndef OPENSSL_NO_SOCK
-
 static struct hostent *GetHostByName(char *name);
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_NETWARE)
-static void ssl_sock_cleanup(void);
+#ifdef OPENSSL_SYS_WINDOWS
+static void sock_cleanup(void);
 #endif
-static int ssl_sock_init(void);
+static int sock_init(void);
 static int init_client_ip(int *sock,unsigned char ip[4], int port);
 static int init_server(int *sock, int port);
 static int init_server_long(int *sock, int port,char *ip);
@@ -104,10 +98,6 @@ static int host_ip(char *str, unsigned char ip[4]);
 #define SOCKET_PROTOCOL	IPPROTO_TCP
 #endif
 
-#ifdef OPENSSL_SYS_NETWARE
-static int wsa_init_done=0;
-#endif
-
 #ifdef OPENSSL_SYS_WINDOWS
 static struct WSAData wsa_state;
 static int wsa_init_done=0;
@@ -128,7 +118,7 @@ static LONG FAR PASCAL topHookProc(HWND hwnd, UINT message, WPARAM wParam,
 		case WM_DESTROY:
 		case WM_CLOSE:
 			SetWindowLong(topWnd,GWL_WNDPROC,(LONG)lpTopWndProc);
-			ssl_sock_cleanup();
+			sock_cleanup();
 			break;
 			}
 		}
@@ -145,43 +135,26 @@ static BOOL CALLBACK enumproc(HWND hwnd,LPARAM lParam)
 #endif /* OPENSSL_SYS_WINDOWS */
 
 #ifdef OPENSSL_SYS_WINDOWS
-static void ssl_sock_cleanup(void)
+static void sock_cleanup(void)
 	{
 	if (wsa_init_done)
 		{
 		wsa_init_done=0;
-#ifndef OPENSSL_SYS_WINCE
 		WSACancelBlockingCall();
-#endif
-		WSACleanup();
-		}
-	}
-#elif defined(OPENSSL_SYS_NETWARE)
-static void sock_cleanup(void)
-    {
-    if (wsa_init_done)
-        {
-        wsa_init_done=0;
 		WSACleanup();
 		}
 	}
 #endif
 
-static int ssl_sock_init(void)
+static int sock_init(void)
 	{
-#ifdef WATT32
-	extern int _watt_do_exit;
-	_watt_do_exit = 0;
-	dbug_init();
-	if (sock_init())
-		return (0);
-#elif defined(OPENSSL_SYS_WINDOWS)
+#ifdef OPENSSL_SYS_WINDOWS
 	if (!wsa_init_done)
 		{
 		int err;
 	  
 #ifdef SIGINT
-		signal(SIGINT,(void (*)(int))ssl_sock_cleanup);
+		signal(SIGINT,(void (*)(int))sock_cleanup);
 #endif
 		wsa_init_done=1;
 		memset(&wsa_state,0,sizeof(wsa_state));
@@ -200,27 +173,6 @@ static int ssl_sock_init(void)
 		SetWindowLong(topWnd,GWL_WNDPROC,(LONG)lpTopHookProc);
 #endif /* OPENSSL_SYS_WIN16 */
 		}
-#elif defined(OPENSSL_SYS_NETWARE)
-   WORD wVerReq;
-   WSADATA wsaData;
-   int err;
-
-   if (!wsa_init_done)
-      {
-   
-# ifdef SIGINT
-      signal(SIGINT,(void (*)(int))sock_cleanup);
-# endif
-
-      wsa_init_done=1;
-      wVerReq = MAKEWORD( 2, 0 );
-      err = WSAStartup(wVerReq,&wsaData);
-      if (err != 0)
-         {
-         BIO_printf(bio_err,"unable to start WINSOCK2, error code=%d\n",err);
-         return(0);
-         }
-      }
 #endif /* OPENSSL_SYS_WINDOWS */
 	return(1);
 	}
@@ -244,7 +196,7 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port)
 	struct sockaddr_in them;
 	int s,i;
 
-	if (!ssl_sock_init()) return(0);
+	if (!sock_init()) return(0);
 
 	memset((char *)&them,0,sizeof(them));
 	them.sin_family=AF_INET;
@@ -309,7 +261,7 @@ static int init_server_long(int *sock, int port, char *ip)
 	struct sockaddr_in server;
 	int s= -1,i;
 
-	if (!ssl_sock_init()) return(0);
+	if (!sock_init()) return(0);
 
 	memset((char *)&server,0,sizeof(server));
 	server.sin_family=AF_INET;
@@ -366,7 +318,7 @@ static int do_accept(int acc_sock, int *sock, char **host)
 	int len;
 /*	struct linger ling; */
 
-	if (!ssl_sock_init()) return(0);
+	if (!sock_init()) return(0);
 
 #ifndef OPENSSL_SYS_WINDOWS
 redoit:
@@ -382,7 +334,7 @@ redoit:
 	ret=accept(acc_sock,(struct sockaddr *)&from,(void *)&len);
 	if (ret == INVALID_SOCKET)
 		{
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_NETWARE)
+#ifdef OPENSSL_SYS_WINDOWS
 		i=WSAGetLastError();
 		BIO_printf(bio_err,"accept error %d\n",i);
 #else
@@ -429,7 +381,7 @@ redoit:
 			perror("OPENSSL_malloc");
 			return(0);
 			}
-		BUF_strlcpy(*host,h1->h_name,strlen(h1->h_name)+1);
+		strcpy(*host,h1->h_name);
 
 		h2=GetHostByName(*host);
 		if (h2 == NULL)
@@ -496,7 +448,7 @@ static int host_ip(char *str, unsigned char ip[4])
 		{ /* do a gethostbyname */
 		struct hostent *he;
 
-		if (!ssl_sock_init()) return(0);
+		if (!sock_init()) return(0);
 
 		he=GetHostByName(str);
 		if (he == NULL)
@@ -577,12 +529,9 @@ static struct hostent *GetHostByName(char *name)
 		ret=gethostbyname(name);
 		if (ret == NULL) return(NULL);
 		/* else add to cache */
-		if(strlen(name) < sizeof ghbn_cache[0].name)
-			{
-			strcpy(ghbn_cache[lowi].name,name);
-			memcpy((char *)&(ghbn_cache[lowi].ent),ret,sizeof(struct hostent));
-			ghbn_cache[lowi].order=ghbn_miss+ghbn_hits;
-			}
+		strncpy(ghbn_cache[lowi].name,name,128);
+		memcpy((char *)&(ghbn_cache[lowi].ent),ret,sizeof(struct hostent));
+		ghbn_cache[lowi].order=ghbn_miss+ghbn_hits;
 		return(ret);
 		}
 	else
@@ -593,5 +542,3 @@ static struct hostent *GetHostByName(char *name)
 		return(ret);
 		}
 	}
-
-#endif

apps/s_time.c

@@ -85,7 +85,7 @@
 #include OPENSSL_UNISTD
 #endif
 
-#if !defined(OPENSSL_SYS_NETWARE) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
+#if !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
 #define TIMES
 #endif
 
@@ -105,10 +105,14 @@
 #undef TIMES
 #endif
 
-#if !defined(TIMES) && !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_NETWARE)
+#if !defined(TIMES) && !defined(OPENSSL_SYS_VXWORKS)
 #include <sys/timeb.h>
 #endif
 
+#ifdef _AIX
+#include <sys/select.h>
+#endif
+
 #if defined(sun) || defined(__ultrix)
 #define _POSIX_SOURCE
 #include <limits.h>
@@ -146,8 +150,6 @@
 #undef BUFSIZZ
 #define BUFSIZZ 1024*10
 
-#define MYBUFSIZ 1024*8
-
 #undef min
 #undef max
 #define min(a,b) (((a) < (b)) ? (a) : (b))
@@ -322,11 +324,6 @@ static int parseArgs(int argc, char **argv)
 		{
 		if (--argc < 1) goto bad;
 		s_www_path= *(++argv);
-		if(strlen(s_www_path) > MYBUFSIZ-100)
-			{
-			BIO_printf(bio_err,"-www option too long\n");
-			badop=1;
-			}
 		}
 	else if(strcmp(*argv,"-bugs") == 0)
 	    st_bugs=1;
@@ -384,20 +381,6 @@ static double tm_Time_F(int s)
 		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
 		return((ret == 0.0)?1e-6:ret);
 	}
-#elif defined(OPENSSL_SYS_NETWARE)
-    static clock_t tstart,tend;
-
-    if (s == START)
-    {
-        tstart=clock();
-        return(0);
-    }
-    else
-    {
-        tend=clock();
-        ret=(double)((double)(tend)-(double)(tstart));
-        return((ret < 0.001)?0.001:ret);
-    }
 #elif defined(OPENSSL_SYS_VXWORKS)
         {
 	static unsigned long tick_start, tick_end;
@@ -501,7 +484,7 @@ int MAIN(int argc, char **argv)
 	tm_Time_F(START);
 	for (;;)
 		{
-		if (finishtime < (long)time(NULL)) break;
+		if (finishtime < time(NULL)) break;
 #ifdef WIN32_STUFF
 
 		if( flushWinMsgs(0) == -1 )
@@ -516,7 +499,7 @@ int MAIN(int argc, char **argv)
 
 		if (s_www_path != NULL)
 			{
-			BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+			sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 			SSL_write(scon,buf,strlen(buf));
 			while ((i=SSL_read(scon,buf,sizeof(buf))) > 0)
 				bytes_read+=i;
@@ -552,9 +535,9 @@ int MAIN(int argc, char **argv)
 		}
 	totalTime += tm_Time_F(STOP); /* Add the time for this iteration */
 
-	i=(int)((long)time(NULL)-finishtime+maxTime);
+	i=(int)(time(NULL)-finishtime+maxTime);
 	printf( "\n\n%d connections in %.2fs; %.2f connections/user sec, bytes read %ld\n", nConn, totalTime, ((double)nConn/totalTime),bytes_read);
-	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,(long)time(NULL)-finishtime+maxTime,bytes_read/nConn);
+	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,time(NULL)-finishtime+maxTime,bytes_read/nConn);
 
 	/* Now loop and time connections using the same session id over and over */
 
@@ -571,7 +554,7 @@ next:
 
 	if (s_www_path != NULL)
 		{
-		BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+		sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 		SSL_write(scon,buf,strlen(buf));
 		while (SSL_read(scon,buf,sizeof(buf)) > 0)
 			;
@@ -586,7 +569,7 @@ next:
 	nConn = 0;
 	totalTime = 0.0;
 
-	finishtime=(long)time(NULL)+maxTime;
+	finishtime=time(NULL)+maxTime;
 
 	printf( "starting\n" );
 	bytes_read=0;
@@ -594,7 +577,7 @@ next:
 		
 	for (;;)
 		{
-		if (finishtime < (long)time(NULL)) break;
+		if (finishtime < time(NULL)) break;
 
 #ifdef WIN32_STUFF
 		if( flushWinMsgs(0) == -1 )
@@ -609,7 +592,7 @@ next:
 
 		if (s_www_path)
 			{
-			BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+			sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 			SSL_write(scon,buf,strlen(buf));
 			while ((i=SSL_read(scon,buf,sizeof(buf))) > 0)
 				bytes_read+=i;
@@ -644,7 +627,7 @@ next:
 
 
 	printf( "\n\n%d connections in %.2fs; %.2f connections/user sec, bytes read %ld\n", nConn, totalTime, ((double)nConn/totalTime),bytes_read);
-	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,(long)time(NULL)-finishtime+maxTime,bytes_read/nConn);
+	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,time(NULL)-finishtime+maxTime,bytes_read/nConn);
 
 	ret=0;
 end:
@@ -656,7 +639,7 @@ end:
 		tm_ctx=NULL;
 		}
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 /***********************************************************************

apps/sess_id.c

@@ -273,7 +273,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (x != NULL) SSL_SESSION_free(x);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static SSL_SESSION *load_sess_id(char *infile, int format)

apps/smime.c

@@ -1,9 +1,9 @@
 /* smime.c */
 /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
+ * project 1999.
  */
 /* ====================================================================
- * Copyright (c) 1999-2003 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -104,9 +104,7 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
         int keyform = FORMAT_PEM;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	args = argv + 1;
 	ret = 1;
@@ -168,10 +166,6 @@ int MAIN(int argc, char **argv)
 				flags |= PKCS7_BINARY;
 		else if (!strcmp (*args, "-nosigs"))
 				flags |= PKCS7_NOSIGS;
-		else if (!strcmp (*args, "-nooldmime"))
-				flags |= PKCS7_NOOLDMIMETYPE;
-		else if (!strcmp (*args, "-crlfeol"))
-				flags |= PKCS7_CRLFEOL;
 		else if (!strcmp (*args, "-crl_check"))
 				store_flags |= X509_V_FLAG_CRL_CHECK;
 		else if (!strcmp (*args, "-crl_check_all"))
@@ -182,13 +176,11 @@ int MAIN(int argc, char **argv)
 				inrand = *args;
 			} else badarg = 1;
 			need_rand = 1;
-#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 			if (args[1]) {
 				args++;
 				engine = *args;
 			} else badarg = 1;
-#endif
 		} else if (!strcmp(*args,"-passin")) {
 			if (args[1]) {
 				args++;
@@ -338,9 +330,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
 		BIO_printf (bio_err, "-crl_check     check revocation status of signer's certificate using CRLs\n");
 		BIO_printf (bio_err, "-crl_check_all check revocation status of signer's certificate chain using CRLs\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf (bio_err, "-engine e      use engine e, possibly a hardware device.\n");
-#endif
 		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
@@ -349,9 +339,7 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
 		BIO_printf(bio_err, "Error getting password\n");
@@ -440,7 +428,7 @@ int MAIN(int argc, char **argv)
 	} else keyfile = NULL;
 
 	if(keyfile) {
-		key = load_key(bio_err, keyfile, keyform, 0, passin, e,
+		key = load_key(bio_err, keyfile, keyform, passin, e,
 			       "signing key file");
 		if (!key) {
 			goto end;
@@ -482,14 +470,8 @@ int MAIN(int argc, char **argv)
 	if(operation == SMIME_ENCRYPT) {
 		p7 = PKCS7_encrypt(encerts, in, cipher, flags);
 	} else if(operation == SMIME_SIGN) {
-		/* If detached data and SMIME output enable partial
-		 * signing.
-		 */
-		if ((flags & PKCS7_DETACHED) && (outformat == FORMAT_SMIME))
-			flags |= PKCS7_STREAM;
 		p7 = PKCS7_sign(signer, key, other, in, flags);
-		/* Don't need to rewind for partial signing */
-		if (!(flags & PKCS7_STREAM) && (BIO_reset(in) != 0)) {
+		if (BIO_reset(in) != 0 && (flags & PKCS7_DETACHED)) {
 		  BIO_printf(bio_err, "Can't rewind input file\n");
 		  goto end;
 		}

apps/speed.c

@@ -55,30 +55,13 @@
  * copied and put under another distribution licence
  * [including the GNU Public Licence.]
  */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The ECDH and ECDSA speed test software is originally written by 
- * Sumit Gupta of Sun Microsystems Laboratories.
- *
- */
 
 /* most of this code has been pilfered from my libdes speed.c program */
 
-#ifndef OPENSSL_NO_SPEED
-
 #undef SECONDS
 #define SECONDS		3	
 #define RSA_SECONDS	10
 #define DSA_SECONDS	10
-#define ECDSA_SECONDS   10
-#define ECDH_SECONDS    10
 
 /* 11-Sep-92 Andrew Daviel   Support for Silicon Graphics IRIX added */
 /* 06-Apr-92 Luke Brennan    Support for VMS and add extra signal calls */
@@ -88,7 +71,7 @@
 
 #include <stdio.h>
 #include <stdlib.h>
-
+#include <signal.h>
 #include <string.h>
 #include <math.h>
 #include "apps.h"
@@ -104,10 +87,6 @@
 #include OPENSSL_UNISTD
 #endif
 
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
 #if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(OPENSSL_SYS_MACOSX)
 # define USE_TOD
 #elif !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
@@ -117,12 +96,6 @@
 # define TIMEB
 #endif
 
-#if defined(OPENSSL_SYS_NETWARE)
-#undef TIMES
-#undef TIMEB
-#include <time.h>
-#endif
-
 #ifndef _IRIX
 # include <time.h>
 #endif
@@ -147,7 +120,7 @@
 #include <sys/timeb.h>
 #endif
 
-#if !defined(TIMES) && !defined(TIMEB) && !defined(USE_TOD) && !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_NETWARE)
+#if !defined(TIMES) && !defined(TIMEB) && !defined(USE_TOD) && !defined(OPENSSL_SYS_VXWORKS)
 #error "It seems neither struct tms nor struct timeb is supported in this platform!"
 #endif
 
@@ -211,28 +184,11 @@
 #ifndef OPENSSL_NO_DSA
 #include "./testdsa.h"
 #endif
-#ifndef OPENSSL_NO_ECDSA
-#include <openssl/ecdsa.h>
-#endif
-#ifndef OPENSSL_NO_ECDH
-#include <openssl/ecdh.h>
-#endif
-
-/*
- * The following "HZ" timing stuff should be sync'd up with the code in
- * crypto/tmdiff.[ch]. That appears to try to do the same job, though I think
- * this code is more up to date than libcrypto's so there may be features to
- * migrate over first. This is used in two places further down AFAICS. 
- * The point is that nothing in openssl actually *uses* that tmdiff stuff, so
- * either speed.c should be using it or it should go because it's obviously not
- * useful enough. Anyone want to do a janitorial job on this?
- */
 
 /* The following if from times(3) man page.  It may need to be changed */
 #ifndef HZ
-# if defined(_SC_CLK_TCK) \
-     && (!defined(OPENSSL_SYS_VMS) || __CTRL_VER >= 70000000)
-#  define HZ sysconf(_SC_CLK_TCK)
+# ifdef _SC_CLK_TCK
+#  define HZ ((double)sysconf(_SC_CLK_TCK))
 # else
 #  ifndef CLK_TCK
 #   ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
@@ -246,7 +202,7 @@
 # endif
 #endif
 
-#if !defined(OPENSSL_SYS_VMS) && !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MACINTOSH_CLASSIC) && !defined(OPENSSL_SYS_OS2) && !defined(OPENSSL_SYS_NETWARE)
+#if !defined(OPENSSL_SYS_VMS) && !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MACINTOSH_CLASSIC) && !defined(OPENSSL_SYS_OS2)
 # define HAVE_FORK 1
 #endif
 
@@ -270,10 +226,6 @@ static int do_multi(int multi);
 #define SIZE_NUM	5
 #define RSA_NUM		4
 #define DSA_NUM		3
-
-#define EC_NUM       16
-#define MAX_ECDH_SIZE 256
-
 static const char *names[ALGOR_NUM]={
   "md2","mdc2","md4","md5","hmac(md5)","sha1","rmd160","rc4",
   "des cbc","des ede3","idea cbc",
@@ -283,9 +235,6 @@ static double results[ALGOR_NUM][SIZE_NUM];
 static int lengths[SIZE_NUM]={16,64,256,1024,8*1024};
 static double rsa_results[RSA_NUM][2];
 static double dsa_results[DSA_NUM][2];
-static double ecdsa_results[EC_NUM][2];
-static double ecdh_results[EC_NUM][1];
-
 
 #ifdef SIGALRM
 #if defined(__STDC__) || defined(sgi) || defined(_AIX)
@@ -308,39 +257,13 @@ static SIGRETTYPE sig_done(int sig)
 #define START	0
 #define STOP	1
 
-#if defined(OPENSSL_SYS_NETWARE)
-
-   /* for NetWare the best we can do is use clock() which returns the
-    * time, in hundredths of a second, since the NLM began executing
-   */
-static double Time_F(int s)
-	{
-	double ret;
-
-   static clock_t tstart,tend;
-
-   if (s == START)
-   {
-      tstart=clock();
-      return(0);
-   }
-   else
-   {
-      tend=clock();
-      ret=(double)((double)(tend)-(double)(tstart));
-      return((ret < 0.001)?0.001:ret);
-   }
-   }
-
-#else
-
 static double Time_F(int s)
 	{
 	double ret;
 
 #ifdef USE_TOD
 	if(usertime)
-		{
+	    {
 		static struct rusage tstart,tend;
 
 		getrusage_used = 1;
@@ -395,8 +318,7 @@ static double Time_F(int s)
 		else
 			{
 			times(&tend);
-			ret = HZ;
-			ret=(double)(tend.tms_utime-tstart.tms_utime) / ret;
+			ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
 			return((ret < 1e-3)?1e-3:ret);
 			}
 		}
@@ -442,29 +364,12 @@ static double Time_F(int s)
 # endif
 #endif
 	}
-#endif /* if defined(OPENSSL_SYS_NETWARE) */
-
-
-static const int KDF1_SHA1_len = 20;
-static void *KDF1_SHA1(void *in, size_t inlen, void *out, size_t outlen)
-	{
-#ifndef OPENSSL_NO_SHA
-	if (outlen != SHA_DIGEST_LENGTH)
-		return NULL;
-	return SHA1(in, inlen, out);
-#else
-	return NULL;
-#endif
-	}
-
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	unsigned char *buf=NULL,*buf2=NULL;
 	int mret=1;
 	long count=0,save_count=0;
@@ -572,24 +477,6 @@ int MAIN(int argc, char **argv)
 #define	R_RSA_1024	1
 #define	R_RSA_2048	2
 #define	R_RSA_4096	3
-
-#define R_EC_P160    0
-#define R_EC_P192    1	
-#define R_EC_P224    2
-#define R_EC_P256    3
-#define R_EC_P384    4
-#define R_EC_P521    5
-#define R_EC_K163    6
-#define R_EC_K233    7
-#define R_EC_K283    8
-#define R_EC_K409    9
-#define R_EC_K571    10
-#define R_EC_B163    11
-#define R_EC_B233    12
-#define R_EC_B283    13
-#define R_EC_B409    14
-#define R_EC_B571    15
-
 #ifndef OPENSSL_NO_RSA
 	RSA *rsa_key[RSA_NUM];
 	long rsa_c[RSA_NUM][2];
@@ -605,83 +492,8 @@ int MAIN(int argc, char **argv)
 	long dsa_c[DSA_NUM][2];
 	static unsigned int dsa_bits[DSA_NUM]={512,1024,2048};
 #endif
-#ifndef OPENSSL_NO_EC
-	/* We only test over the following curves as they are representative, 
-	 * To add tests over more curves, simply add the curve NID
-	 * and curve name to the following arrays and increase the 
-	 * EC_NUM value accordingly. 
-	 */
-	static unsigned int test_curves[EC_NUM] = 
-	{	
-	/* Prime Curves */
-	NID_secp160r1,
-	NID_X9_62_prime192v1,
-	NID_secp224r1,
-	NID_X9_62_prime256v1,
-	NID_secp384r1,
-	NID_secp521r1,
-	/* Binary Curves */
-	NID_sect163k1,
-	NID_sect233k1,
-	NID_sect283k1,
-	NID_sect409k1,
-	NID_sect571k1,
-	NID_sect163r2,
-	NID_sect233r1,
-	NID_sect283r1,
-	NID_sect409r1,
-	NID_sect571r1
-	}; 
-	static char * test_curves_names[EC_NUM] = 
-	{
-	/* Prime Curves */
-	"secp160r1",
-	"nistp192",
-	"nistp224",
-	"nistp256",
-	"nistp384",
-	"nistp521",
-	/* Binary Curves */
-	"nistk163",
-	"nistk233",
-	"nistk283",
-	"nistk409",
-	"nistk571",
-	"nistb163",
-	"nistb233",
-	"nistb283",
-	"nistb409",
-	"nistb571"
-	};
-	static int test_curves_bits[EC_NUM] =
-        {
-        160, 192, 224, 256, 384, 521,
-        163, 233, 283, 409, 571,
-        163, 233, 283, 409, 571
-        };
-
-#endif
-
-#ifndef OPENSSL_NO_ECDSA
-        unsigned char ecdsasig[256];
-        unsigned int ecdsasiglen;
-        EC_KEY *ecdsa[EC_NUM];
-        long ecdsa_c[EC_NUM][2];
-#endif
-
-#ifndef OPENSSL_NO_ECDH
-        EC_KEY *ecdh_a[EC_NUM], *ecdh_b[EC_NUM];
-        unsigned char secret_a[MAX_ECDH_SIZE], secret_b[MAX_ECDH_SIZE];
-        int secret_size_a, secret_size_b;
-        int ecdh_checks = 0;
-        int secret_idx = 0;
-        long ecdh_c[EC_NUM][2];
-#endif
-
 	int rsa_doit[RSA_NUM];
 	int dsa_doit[DSA_NUM];
-	int ecdsa_doit[EC_NUM];
-        int ecdh_doit[EC_NUM];
 	int doit[ALGOR_NUM];
 	int pr_header=0;
 	const EVP_CIPHER *evp_cipher=NULL;
@@ -700,17 +512,6 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_DSA
 	memset(dsa_key,0,sizeof(dsa_key));
 #endif
-#ifndef OPENSSL_NO_ECDSA
-	for (i=0; i<EC_NUM; i++) ecdsa[i] = NULL;
-#endif
-#ifndef OPENSSL_NO_ECDH
-	for (i=0; i<EC_NUM; i++)
-		{
-		ecdh_a[i] = NULL;
-		ecdh_b[i] = NULL;
-		}
-#endif
-
 
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
@@ -749,15 +550,6 @@ int MAIN(int argc, char **argv)
 		rsa_doit[i]=0;
 	for (i=0; i<DSA_NUM; i++)
 		dsa_doit[i]=0;
-#ifndef OPENSSL_NO_ECDSA
-	for (i=0; i<EC_NUM; i++)
-		ecdsa_doit[i]=0;
-#endif
-#ifndef OPENSSL_NO_ECDH
-	for (i=0; i<EC_NUM; i++)
-		ecdh_doit[i]=0;
-#endif
-
 	
 	j=0;
 	argc--;
@@ -797,7 +589,6 @@ int MAIN(int argc, char **argv)
 			j--;	/* Otherwise, -elapsed gets confused with
 				   an algorithm. */
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if	((argc > 0) && (strcmp(*argv,"-engine") == 0))
 			{
 			argc--;
@@ -814,7 +605,6 @@ int MAIN(int argc, char **argv)
 			   means all of them should be run) */
 			j--;
 			}
-#endif
 #ifdef HAVE_FORK
 		else if	((argc > 0) && (strcmp(*argv,"-multi") == 0))
 			{
@@ -976,53 +766,6 @@ int MAIN(int argc, char **argv)
 			{
 			dsa_doit[R_DSA_512]=1;
 			dsa_doit[R_DSA_1024]=1;
-			dsa_doit[R_DSA_2048]=1;
-			}
-		else
-#endif
-#ifndef OPENSSL_NO_ECDSA
-		     if (strcmp(*argv,"ecdsap160") == 0) ecdsa_doit[R_EC_P160]=2;
-		else if (strcmp(*argv,"ecdsap224") == 0) ecdsa_doit[R_EC_P224]=2;
-		else if (strcmp(*argv,"ecdsap256") == 0) ecdsa_doit[R_EC_P256]=2;
-		else if (strcmp(*argv,"ecdsap384") == 0) ecdsa_doit[R_EC_P384]=2;
-		else if (strcmp(*argv,"ecdsap521") == 0) ecdsa_doit[R_EC_P521]=2;
-		else if (strcmp(*argv,"ecdsak163") == 0) ecdsa_doit[R_EC_K163]=2;
-		else if (strcmp(*argv,"ecdsak233") == 0) ecdsa_doit[R_EC_K233]=2;
-		else if (strcmp(*argv,"ecdsak283") == 0) ecdsa_doit[R_EC_K283]=2;
-		else if (strcmp(*argv,"ecdsak409") == 0) ecdsa_doit[R_EC_K409]=2;
-		else if (strcmp(*argv,"ecdsak571") == 0) ecdsa_doit[R_EC_K571]=2;
-		else if (strcmp(*argv,"ecdsab163") == 0) ecdsa_doit[R_EC_B163]=2;
-		else if (strcmp(*argv,"ecdsab233") == 0) ecdsa_doit[R_EC_B233]=2;
-		else if (strcmp(*argv,"ecdsab283") == 0) ecdsa_doit[R_EC_B283]=2;
-		else if (strcmp(*argv,"ecdsab409") == 0) ecdsa_doit[R_EC_B409]=2;
-		else if (strcmp(*argv,"ecdsab571") == 0) ecdsa_doit[R_EC_B571]=2;
-		else if (strcmp(*argv,"ecdsa") == 0)
-			{
-			for (i=0; i < EC_NUM; i++)
-				ecdsa_doit[i]=1;
-			}
-		else
-#endif
-#ifndef OPENSSL_NO_ECDH
-		     if (strcmp(*argv,"ecdhp160") == 0) ecdh_doit[R_EC_P160]=2;
-		else if (strcmp(*argv,"ecdhp224") == 0) ecdh_doit[R_EC_P224]=2;
-		else if (strcmp(*argv,"ecdhp256") == 0) ecdh_doit[R_EC_P256]=2;
-		else if (strcmp(*argv,"ecdhp384") == 0) ecdh_doit[R_EC_P384]=2;
-		else if (strcmp(*argv,"ecdhp521") == 0) ecdh_doit[R_EC_P521]=2;
-		else if (strcmp(*argv,"ecdhk163") == 0) ecdh_doit[R_EC_K163]=2;
-		else if (strcmp(*argv,"ecdhk233") == 0) ecdh_doit[R_EC_K233]=2;
-		else if (strcmp(*argv,"ecdhk283") == 0) ecdh_doit[R_EC_K283]=2;
-		else if (strcmp(*argv,"ecdhk409") == 0) ecdh_doit[R_EC_K409]=2;
-		else if (strcmp(*argv,"ecdhk571") == 0) ecdh_doit[R_EC_K571]=2;
-		else if (strcmp(*argv,"ecdhb163") == 0) ecdh_doit[R_EC_B163]=2;
-		else if (strcmp(*argv,"ecdhb233") == 0) ecdh_doit[R_EC_B233]=2;
-		else if (strcmp(*argv,"ecdhb283") == 0) ecdh_doit[R_EC_B283]=2;
-		else if (strcmp(*argv,"ecdhb409") == 0) ecdh_doit[R_EC_B409]=2;
-		else if (strcmp(*argv,"ecdhb571") == 0) ecdh_doit[R_EC_B571]=2;
-		else if (strcmp(*argv,"ecdh") == 0)
-			{
-			for (i=0; i < EC_NUM; i++)
-				ecdh_doit[i]=1;
 			}
 		else
 #endif
@@ -1091,18 +834,6 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_DSA
 			BIO_printf(bio_err,"dsa512   dsa1024  dsa2048\n");
 #endif
-#ifndef OPENSSL_NO_ECDSA
-			BIO_printf(bio_err,"ecdsap160 ecdsap224 ecdsap256 ecdsap384 ecdsap521\n");
-			BIO_printf(bio_err,"ecdsak163 ecdsak233 ecdsak283 ecdsak409 ecdsak571\n");
-			BIO_printf(bio_err,"ecdsab163 ecdsab233 ecdsab283 ecdsab409 ecdsab571\n");
-			BIO_printf(bio_err,"ecdsa\n");
-#endif
-#ifndef OPENSSL_NO_ECDH
-			BIO_printf(bio_err,"ecdhp160  ecdhp224  ecdhp256  ecdhp384  ecdhp521\n");
-			BIO_printf(bio_err,"ecdhk163  ecdhk233  ecdhk283  ecdhk409  ecdhk571\n");
-			BIO_printf(bio_err,"ecdhb163  ecdhb233  ecdhb283  ecdhb409  ecdhb571\n");
-			BIO_printf(bio_err,"ecdh\n");
-#endif
 
 #ifndef OPENSSL_NO_IDEA
 			BIO_printf(bio_err,"idea     ");
@@ -1130,12 +861,10 @@ int MAIN(int argc, char **argv)
 
 			BIO_printf(bio_err,"\n");
 			BIO_printf(bio_err,"Available options:\n");
-#if defined(TIMES) || defined(USE_TOD)
+#ifdef TIMES
 			BIO_printf(bio_err,"-elapsed        measure time in real time instead of CPU user time.\n");
 #endif
-#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
-#endif
 			BIO_printf(bio_err,"-evp e          use EVP e.\n");
 			BIO_printf(bio_err,"-decrypt        time decryption instead of encryption (only EVP).\n");
 			BIO_printf(bio_err,"-mr             produce machine readable output.\n");
@@ -1268,9 +997,6 @@ int MAIN(int argc, char **argv)
 	c[D_CBC_RC5][0]=count;
 	c[D_CBC_BF][0]=count;
 	c[D_CBC_CAST][0]=count;
-	c[D_CBC_128_AES][0]=count;
-	c[D_CBC_192_AES][0]=count;
-	c[D_CBC_256_AES][0]=count;
 
 	for (i=1; i<SIZE_NUM; i++)
 		{
@@ -1296,9 +1022,6 @@ int MAIN(int argc, char **argv)
 		c[D_CBC_RC5][i]=c[D_CBC_RC5][i-1]*l0/l1;
 		c[D_CBC_BF][i]=c[D_CBC_BF][i-1]*l0/l1;
 		c[D_CBC_CAST][i]=c[D_CBC_CAST][i-1]*l0/l1;
-		c[D_CBC_128_AES][i]=c[D_CBC_128_AES][i-1]*l0/l1;
-		c[D_CBC_192_AES][i]=c[D_CBC_192_AES][i-1]*l0/l1;
-		c[D_CBC_256_AES][i]=c[D_CBC_256_AES][i-1]*l0/l1;
 		}
 #ifndef OPENSSL_NO_RSA
 	rsa_c[R_RSA_512][0]=count/2000;
@@ -1340,114 +1063,6 @@ int MAIN(int argc, char **argv)
 		}
 #endif
 
-#ifndef OPENSSL_NO_ECDSA
-	ecdsa_c[R_EC_P160][0]=count/1000;
-	ecdsa_c[R_EC_P160][1]=count/1000/2;
-	for (i=R_EC_P224; i<=R_EC_P521; i++)
-		{
-		ecdsa_c[i][0]=ecdsa_c[i-1][0]/2;
-		ecdsa_c[i][1]=ecdsa_c[i-1][1]/2;
-		if ((ecdsa_doit[i] <= 1) && (ecdsa_c[i][0] == 0))
-			ecdsa_doit[i]=0;
-		else
-			{
-			if (ecdsa_c[i] == 0)
-				{
-				ecdsa_c[i][0]=1;
-				ecdsa_c[i][1]=1;
-				}
-			}
-		}
-	ecdsa_c[R_EC_K163][0]=count/1000;
-	ecdsa_c[R_EC_K163][1]=count/1000/2;
-	for (i=R_EC_K233; i<=R_EC_K571; i++)
-		{
-		ecdsa_c[i][0]=ecdsa_c[i-1][0]/2;
-		ecdsa_c[i][1]=ecdsa_c[i-1][1]/2;
-		if ((ecdsa_doit[i] <= 1) && (ecdsa_c[i][0] == 0))
-			ecdsa_doit[i]=0;
-		else
-			{
-			if (ecdsa_c[i] == 0)
-				{
-				ecdsa_c[i][0]=1;
-				ecdsa_c[i][1]=1;
-				}
-			}
-		}
-	ecdsa_c[R_EC_B163][0]=count/1000;
-	ecdsa_c[R_EC_B163][1]=count/1000/2;
-	for (i=R_EC_B233; i<=R_EC_B571; i++)
-		{
-		ecdsa_c[i][0]=ecdsa_c[i-1][0]/2;
-		ecdsa_c[i][1]=ecdsa_c[i-1][1]/2;
-		if ((ecdsa_doit[i] <= 1) && (ecdsa_c[i][0] == 0))
-			ecdsa_doit[i]=0;
-		else
-			{
-			if (ecdsa_c[i] == 0)
-				{
-				ecdsa_c[i][0]=1;
-				ecdsa_c[i][1]=1;
-				}
-			}
-		}
-#endif
-
-#ifndef OPENSSL_NO_ECDH
-	ecdh_c[R_EC_P160][0]=count/1000;
-	ecdh_c[R_EC_P160][1]=count/1000;
-	for (i=R_EC_P224; i<=R_EC_P521; i++)
-		{
-		ecdh_c[i][0]=ecdh_c[i-1][0]/2;
-		ecdh_c[i][1]=ecdh_c[i-1][1]/2;
-		if ((ecdh_doit[i] <= 1) && (ecdh_c[i][0] == 0))
-			ecdh_doit[i]=0;
-		else
-			{
-			if (ecdh_c[i] == 0)
-				{
-				ecdh_c[i][0]=1;
-				ecdh_c[i][1]=1;
-				}
-			}
-		}
-	ecdh_c[R_EC_K163][0]=count/1000;
-	ecdh_c[R_EC_K163][1]=count/1000;
-	for (i=R_EC_K233; i<=R_EC_K571; i++)
-		{
-		ecdh_c[i][0]=ecdh_c[i-1][0]/2;
-		ecdh_c[i][1]=ecdh_c[i-1][1]/2;
-		if ((ecdh_doit[i] <= 1) && (ecdh_c[i][0] == 0))
-			ecdh_doit[i]=0;
-		else
-			{
-			if (ecdh_c[i] == 0)
-				{
-				ecdh_c[i][0]=1;
-				ecdh_c[i][1]=1;
-				}
-			}
-		}
-	ecdh_c[R_EC_B163][0]=count/1000;
-	ecdh_c[R_EC_B163][1]=count/1000;
-	for (i=R_EC_B233; i<=R_EC_B571; i++)
-		{
-		ecdh_c[i][0]=ecdh_c[i-1][0]/2;
-		ecdh_c[i][1]=ecdh_c[i-1][1]/2;
-		if ((ecdh_doit[i] <= 1) && (ecdh_c[i][0] == 0))
-			ecdh_doit[i]=0;
-		else
-			{
-			if (ecdh_c[i] == 0)
-				{
-				ecdh_c[i][0]=1;
-				ecdh_c[i][1]=1;
-				}
-			}
-		}
-#endif
-
 #define COND(d)	(count < (d))
 #define COUNT(d) (d)
 #else
@@ -1777,7 +1392,6 @@ int MAIN(int argc, char **argv)
 				else
 					EVP_EncryptFinal_ex(&ctx,buf,&outl);
 				d=Time_F(STOP);
-				EVP_CIPHER_CTX_cleanup(&ctx);
 				}
 			if (evp_md)
 				{
@@ -1973,239 +1587,6 @@ int MAIN(int argc, char **argv)
 		}
 	if (rnd_fake) RAND_cleanup();
 #endif
-
-#ifndef OPENSSL_NO_ECDSA
-	if (RAND_status() != 1) 
-		{
-		RAND_seed(rnd_seed, sizeof rnd_seed);
-		rnd_fake = 1;
-		}
-	for (j=0; j<EC_NUM; j++) 
-		{
-		int ret;
-
-		if (!ecdsa_doit[j]) continue; /* Ignore Curve */ 
-		ecdsa[j] = EC_KEY_new();
-		if (ecdsa[j] == NULL) 
-			{
-			BIO_printf(bio_err,"ECDSA failure.\n");
-			ERR_print_errors(bio_err);
-			rsa_count=1;
-			} 
-		else 
-			{
-			ecdsa[j]->group = EC_GROUP_new_by_nid(test_curves[j]);
-			/* Could not obtain group information */
-			if (ecdsa[j]->group == NULL) 
-				{
-				BIO_printf(bio_err,"ECDSA failure.Could not obtain group information\n");
-				ERR_print_errors(bio_err);
-				rsa_count=1;
-				} 
-			else 
-				{
-#if 1
-				EC_GROUP_precompute_mult(ecdsa[j]->group, NULL);
-#endif
-				/* Perform ECDSA signature test */
-				EC_KEY_generate_key(ecdsa[j]);
-				ret = ECDSA_sign(0, buf, 20, ecdsasig, 
-					&ecdsasiglen, ecdsa[j]);
-				if (ret == 0) 
-					{
-					BIO_printf(bio_err,"ECDSA sign failure.  No ECDSA sign will be done.\n");
-					ERR_print_errors(bio_err);
-					rsa_count=1;
-					} 
-				else 
-					{
-					pkey_print_message("sign","ecdsa",
-						ecdsa_c[j][0], 
-						test_curves_bits[j],
-						ECDSA_SECONDS);
-
-					Time_F(START);
-					for (count=0,run=1; COND(ecdsa_c[j][0]);
-						count++) 
-						{
-						ret=ECDSA_sign(0, buf, 20, 
-							ecdsasig, &ecdsasiglen,
-							ecdsa[j]);
-						if (ret == 0) 
-							{
-							BIO_printf(bio_err, "ECDSA sign failure\n");
-							ERR_print_errors(bio_err);
-							count=1;
-							break;
-							}
-						}
-						d=Time_F(STOP);
-
-						BIO_printf(bio_err, mr ? "+R5:%ld:%d:%.2f\n" :
-						"%ld %d bit ECDSA signs in %.2fs \n", 
-						count, test_curves_bits[j], d);
-						ecdsa_results[j][0]=d/(double)count;
-						rsa_count=count;
-					}
-
-				/* Perform ECDSA verification test */
-				ret=ECDSA_verify(0, buf, 20, ecdsasig, 
-					ecdsasiglen, ecdsa[j]);
-				if (ret != 1) 
-					{
-					BIO_printf(bio_err,"ECDSA verify failure.  No ECDSA verify will be done.\n");
-					ERR_print_errors(bio_err);
-					ecdsa_doit[j] = 0;
-					} 
-				else 
-					{
-					pkey_print_message("verify","ecdsa",
-					ecdsa_c[j][1],
-					test_curves_bits[j],
-					ECDSA_SECONDS);
-					Time_F(START);
-					for (count=0,run=1; COND(ecdsa_c[j][1]); count++) 
-						{
-						ret=ECDSA_verify(0, buf, 20, ecdsasig, ecdsasiglen, ecdsa[j]);
-						if (ret != 1) 
-							{
-							BIO_printf(bio_err, "ECDSA verify failure\n");
-							ERR_print_errors(bio_err);
-							count=1;
-							break;
-							}
-						}
-						d=Time_F(STOP);
-						BIO_printf(bio_err, mr? "+R6:%ld:%d:%.2f\n"
-							: "%ld %d bit ECDSA verify in %.2fs\n",
-						count, test_curves_bits[j], d);
-						ecdsa_results[j][1]=d/(double)count;
-					}
-
-				if (rsa_count <= 1) 
-					{
-					/* if longer than 10s, don't do any more */
-					for (j++; j<EC_NUM; j++)
-					ecdsa_doit[j]=0;
-					}
-				}
-			}
-		}
-	if (rnd_fake) RAND_cleanup();
-#endif
-
-#ifndef OPENSSL_NO_ECDH
-	if (RAND_status() != 1)
-		{
-		RAND_seed(rnd_seed, sizeof rnd_seed);
-		rnd_fake = 1;
-		}
-	for (j=0; j<EC_NUM; j++)
-		{
-		if (!ecdh_doit[j]) continue;
-		ecdh_a[j] = EC_KEY_new();
-		ecdh_b[j] = EC_KEY_new();
-		if ((ecdh_a[j] == NULL) || (ecdh_b[j] == NULL))
-			{
-			BIO_printf(bio_err,"ECDH failure.\n");
-			ERR_print_errors(bio_err);
-			rsa_count=1;
-			}
-		else
-			{
-			ecdh_a[j]->group = EC_GROUP_new_by_nid(test_curves[j]);
-			if (ecdh_a[j]->group == NULL)
-				{
-				BIO_printf(bio_err,"ECDH failure.\n");
-				ERR_print_errors(bio_err);
-				rsa_count=1;
-				}
-			else
-				{
-				ecdh_b[j]->group = EC_GROUP_dup(ecdh_a[j]->group);
-
-				/* generate two ECDH key pairs */
-				if (!EC_KEY_generate_key(ecdh_a[j]) ||
-					!EC_KEY_generate_key(ecdh_b[j]))
-					{
-					BIO_printf(bio_err,"ECDH key generation failure.\n");
-					ERR_print_errors(bio_err);
-					rsa_count=1;		
-					}
-				else
-					{
-					/* If field size is not more than 24 octets, then use SHA-1 hash of result;
-					 * otherwise, use result (see section 4.8 of draft-ietf-tls-ecc-03.txt).
-					 */
-					int field_size, outlen;
-					void *(*kdf)(void *in, size_t inlen, void *out, size_t xoutlen);
-					field_size = EC_GROUP_get_degree(ecdh_a[j]->group);
-					if (field_size <= 24 * 8)
-						{
-						outlen = KDF1_SHA1_len;
-						kdf = KDF1_SHA1;
-						}
-					else
-						{
-						outlen = (field_size+7)/8;
-						kdf = NULL;
-						}
-					secret_size_a = ECDH_compute_key(secret_a, outlen,
-						ecdh_b[j]->pub_key,
-						ecdh_a[j], kdf);
-					secret_size_b = ECDH_compute_key(secret_b, outlen,
-						ecdh_a[j]->pub_key,
-						ecdh_b[j], kdf);
-					if (secret_size_a != secret_size_b) 
-						ecdh_checks = 0;
-					else
-						ecdh_checks = 1;
-
-					for (secret_idx = 0; 
-					    (secret_idx < secret_size_a)
-						&& (ecdh_checks == 1);
-					    secret_idx++)
-						{
-						if (secret_a[secret_idx] != secret_b[secret_idx])
-						ecdh_checks = 0;
-						}
-
-					if (ecdh_checks == 0)
-						{
-						BIO_printf(bio_err,"ECDH computations don't match.\n");
-						ERR_print_errors(bio_err);
-						rsa_count=1;		
-						}
-
-					pkey_print_message("","ecdh",
-					ecdh_c[j][0], 
-					test_curves_bits[j],
-					ECDH_SECONDS);
-					Time_F(START);
-					for (count=0,run=1; COND(ecdh_c[j][0]); count++)
-						{
-						ECDH_compute_key(secret_a, outlen,
-						ecdh_b[j]->pub_key,
-						ecdh_a[j], kdf);
-						}
-					d=Time_F(STOP);
-					BIO_printf(bio_err, mr ? "+R7:%ld:%d:%.2f\n" :"%ld %d-bit ECDH ops in %.2fs\n",
-					count, test_curves_bits[j], d);
-					ecdh_results[j][0]=d/(double)count;
-					rsa_count=count;
-					}
-				}
-			}
-
-		if (rsa_count <= 1)
-			{
-			/* if longer than 10s, don't do any more */
-			for (j++; j<EC_NUM; j++)
-			ecdh_doit[j]=0;
-			}
-		}
-	if (rnd_fake) RAND_cleanup();
-#endif
 #ifdef HAVE_FORK
 show_res:
 #endif
@@ -2246,10 +1627,7 @@ show_res:
 #endif
 #ifdef HZ
 #define as_string(s) (#s)
-		{
-		double dbl = HZ;
-		printf("HZ=%g", dbl);
-		}
+		printf("HZ=%g", (double)HZ);
 # ifdef _SC_CLK_TCK
 		printf(" [sysconf value]");
 # endif
@@ -2334,57 +1712,7 @@ show_res:
 				1.0/dsa_results[k][0],1.0/dsa_results[k][1]);
 		}
 #endif
-#ifndef OPENSSL_NO_ECDSA
-	j=1;
-	for (k=0; k<EC_NUM; k++)
-		{
-		if (!ecdsa_doit[k]) continue;
-		if (j && !mr)
-			{
-			printf("%30ssign    verify    sign/s verify/s\n"," ");
-			j=0;
-			}
-
-		if (mr)
-			fprintf(stdout,"+F4:%u:%u:%f:%f\n", 
-				k, test_curves_bits[k],
-				ecdsa_results[k][0],ecdsa_results[k][1]);
-		else
-			fprintf(stdout,
-				"%4u bit ecdsa (%s) %8.4fs %8.4fs %8.1f %8.1f\n", 
-				test_curves_bits[k],
-				test_curves_names[k],
-				ecdsa_results[k][0],ecdsa_results[k][1], 
-				1.0/ecdsa_results[k][0],1.0/ecdsa_results[k][1]);
-		}
-#endif
-
-
-#ifndef OPENSSL_NO_ECDH
-	j=1;
-	for (k=0; k<EC_NUM; k++)
-		{
-		if (!ecdh_doit[k]) continue;
-		if (j && !mr)
-			{
-			printf("%30sop      op/s\n"," ");
-			j=0;
-			}
-		if (mr)
-			fprintf(stdout,"+F5:%u:%u:%f:%f\n",
-				k, test_curves_bits[k],
-				ecdh_results[k][0], 1.0/ecdh_results[k][0]);
-
-		else
-			fprintf(stdout,"%4u bit ecdh (%s) %8.4fs %8.1f\n",
-				test_curves_bits[k],
-				test_curves_names[k],
-				ecdh_results[k][0], 1.0/ecdh_results[k][0]);
-		}
-#endif
-
 	mret=0;
-
 end:
 	ERR_print_errors(bio_err);
 	if (buf != NULL) OPENSSL_free(buf);
@@ -2399,24 +1727,8 @@ end:
 		if (dsa_key[i] != NULL)
 			DSA_free(dsa_key[i]);
 #endif
-
-#ifndef OPENSSL_NO_ECDSA
-	for (i=0; i<EC_NUM; i++)
-		if (ecdsa[i] != NULL)
-			EC_KEY_free(ecdsa[i]);
-#endif
-#ifndef OPENSSL_NO_ECDH
-	for (i=0; i<EC_NUM; i++)
-	{
-		if (ecdh_a[i] != NULL)
-			EC_KEY_free(ecdh_a[i]);
-		if (ecdh_b[i] != NULL)
-			EC_KEY_free(ecdh_b[i]);
-	}
-#endif
-
 	apps_shutdown();
-	OPENSSL_EXIT(mret);
+	EXIT(mret);
 	}
 
 static void print_message(const char *s, long num, int length)
@@ -2456,8 +1768,8 @@ static void pkey_print_message(char *str, char *str2, long num, int bits,
 
 static void print_result(int alg,int run_no,int count,double time_used)
 	{
-	BIO_printf(bio_err,mr ? "+R:%d:%s:%f\n"
-		   : "%d %s's in %.2fs\n",count,names[alg],time_used);
+	BIO_printf(bio_err,mr ? "+R:%ld:%s:%f\n"
+		   : "%ld %s's in %.2fs\n",count,names[alg],time_used);
 	results[alg][run_no]=((double)count)/time_used*lengths[run_no];
 	}
 
@@ -2469,7 +1781,7 @@ static char *sstrsep(char **string, const char *delim)
     if (**string == 0)
         return NULL;
 
-    memset(isdelim, 0, sizeof isdelim);
+    memset(isdelim, 0, 256);
     isdelim[0] = 1;
 
     while (*delim)
@@ -2616,49 +1928,6 @@ static int do_multi(int multi)
 				else
 					dsa_results[k][1]=d;
 				}
-#ifndef OPENSSL_NO_ECDSA
-			else if(!strncmp(buf,"+F4:",4))
-				{
-				int k;
-				double d;
-				
-				p=buf+4;
-				k=atoi(sstrsep(&p,sep));
-				sstrsep(&p,sep);
-
-				d=atof(sstrsep(&p,sep));
-				if(n)
-					ecdsa_results[k][0]=1/(1/ecdsa_results[k][0]+1/d);
-				else
-					ecdsa_results[k][0]=d;
-
-				d=atof(sstrsep(&p,sep));
-				if(n)
-					ecdsa_results[k][1]=1/(1/ecdsa_results[k][1]+1/d);
-				else
-					ecdsa_results[k][1]=d;
-				}
-#endif 
-
-#ifndef OPENSSL_NO_ECDH
-			else if(!strncmp(buf,"+F5:",4))
-				{
-				int k;
-				double d;
-				
-				p=buf+4;
-				k=atoi(sstrsep(&p,sep));
-				sstrsep(&p,sep);
-
-				d=atof(sstrsep(&p,sep));
-				if(n)
-					ecdh_results[k][0]=1/(1/ecdh_results[k][0]+1/d);
-				else
-					ecdh_results[k][0]=d;
-
-				}
-#endif
-
 			else if(!strncmp(buf,"+H:",3))
 				{
 				}
@@ -2669,4 +1938,3 @@ static int do_multi(int multi)
 	return 1;
 	}
 #endif
-#endif

apps/spkac.c

@@ -92,9 +92,7 @@ int MAIN(int argc, char **argv)
 	CONF *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
 	EVP_PKEY *pkey = NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	apps_startup();
 
@@ -143,13 +141,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			spksect= *(++argv);
 			}
-#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -175,9 +171,7 @@ bad:
 		BIO_printf(bio_err," -noout         don't print SPKAC\n");
 		BIO_printf(bio_err," -pubkey        output public key\n");
 		BIO_printf(bio_err," -verify        verify SPKAC signature\n");
-#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
-#endif
 		goto end;
 		}
 
@@ -187,14 +181,12 @@ bad:
 		goto end;
 	}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if(keyfile) {
 		pkey = load_key(bio_err,
 				strcmp(keyfile, "-") ? keyfile : NULL,
-				FORMAT_PEM, 1, passin, e, "private key");
+				FORMAT_PEM, passin, e, "private key");
 		if(!pkey) {
 			goto end;
 		}
@@ -303,5 +295,5 @@ end:
 	EVP_PKEY_free(pkey);
 	if(passin) OPENSSL_free(passin);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/verify.c

@@ -86,9 +86,7 @@ int MAIN(int argc, char **argv)
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
@@ -144,13 +142,11 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
-#ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
 				if (--argc < 1) goto end;
 				engine= *(++argv);
 				}
-#endif
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
 			else if (strcmp(*argv,"-ignore_critical") == 0)
@@ -174,9 +170,7 @@ int MAIN(int argc, char **argv)
 			break;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
@@ -225,11 +219,7 @@ int MAIN(int argc, char **argv)
 	ret=0;
 end:
 	if (ret == 1) {
-		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check]");
-#ifndef OPENSSL_NO_ENGINE
-		BIO_printf(bio_err," [-engine e]");
-#endif
-		BIO_printf(bio_err," cert1 cert2 ...\n");
+		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check] [-engine e] cert1 cert2 ...\n");
 		BIO_printf(bio_err,"recognized usages:\n");
 		for(i = 0; i < X509_PURPOSE_get_count(); i++) {
 			X509_PURPOSE *ptmp;
@@ -242,7 +232,7 @@ end:
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e)
@@ -340,8 +330,7 @@ static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 	if (!ok)
 		{
 		X509_NAME_oneline(
-				X509_get_subject_name(ctx->current_cert),buf,
-				sizeof buf);
+				X509_get_subject_name(ctx->current_cert),buf,256);
 		printf("%s\n",buf);
 		printf("error %d at %d depth lookup:%s\n",ctx->error,
 			ctx->error_depth,

apps/version.c

@@ -172,19 +172,7 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
-	if (version)
-		{
-		if (SSLeay() == SSLEAY_VERSION_NUMBER)
-			{
-			printf("%s\n",SSLeay_version(SSLEAY_VERSION));
-			}
-		else
-			{
-			printf("%s (Library: %s)\n",
-				OPENSSL_VERSION_TEXT,
-				SSLeay_version(SSLEAY_VERSION));
-			}
-		}
+	if (version) printf("%s\n",SSLeay_version(SSLEAY_VERSION));
 	if (date)    printf("%s\n",SSLeay_version(SSLEAY_BUILT_ON));
 	if (platform) printf("%s\n",SSLeay_version(SSLEAY_PLATFORM));
 	if (options) 
@@ -212,5 +200,5 @@ int MAIN(int argc, char **argv)
 	if (dir)  printf("%s\n",SSLeay_version(SSLEAY_DIR));
 end:
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/winrand.c

@@ -118,6 +118,7 @@ LRESULT CALLBACK WndProc(HWND hwnd, UINT iMsg, WPARAM wParam, LPARAM lParam)
         HDC hdc;
 	PAINTSTRUCT ps;
         RECT rect;
+        char buffer[200];
         static int seeded = 0;
 
 	switch (iMsg)

apps/x509.c

@@ -92,9 +92,7 @@ static char *x509_usage[]={
 " -out arg        - output file - default stdout\n",
 " -passin arg     - private key password source\n",
 " -serial         - print serial number value\n",
-" -subject_hash   - print subject hash value\n",
-" -issuer_hash    - print issuer hash value\n",
-" -hash           - synonym for -subject_hash\n",
+" -hash           - print hash value\n",
 " -subject        - print subject DN\n",
 " -issuer         - print issuer DN\n",
 " -email          - print email address(es)\n",
@@ -124,7 +122,7 @@ static char *x509_usage[]={
 " -CAkey arg      - set the CA key, must be PEM format\n",
 "                   missing, it is assumed to be in the CA file.\n",
 " -CAcreateserial - create serial number file if it does not exist\n",
-" -CAserial arg   - serial file\n",
+" -CAserial       - serial file\n",
 " -set_serial     - serial number to use\n",
 " -text           - print the certificate in text form\n",
 " -C              - print out C code forms\n",
@@ -133,9 +131,7 @@ static char *x509_usage[]={
 " -extensions     - section from config file with X509V3 extensions to add\n",
 " -clrext         - delete extensions before signing and input certificate\n",
 " -nameopt arg    - various certificate name options\n",
-#ifndef OPENSSL_NO_ENGINE
 " -engine e       - use engine e, possibly a hardware device.\n",
-#endif
 " -certopt arg    - various certificate text options\n",
 NULL
 };
@@ -169,8 +165,8 @@ int MAIN(int argc, char **argv)
 	char *infile=NULL,*outfile=NULL,*keyfile=NULL,*CAfile=NULL;
 	char *CAkeyfile=NULL,*CAserial=NULL;
 	char *alias=NULL;
-	int text=0,serial=0,subject=0,issuer=0,startdate=0,enddate=0;
-	int subject_hash=0,issuer_hash=0,ocspid=0;
+	int text=0,serial=0,hash=0,subject=0,issuer=0,startdate=0,enddate=0;
+	int ocspid=0;
 	int noout=0,sign_flag=0,CA_flag=0,CA_createserial=0,email=0;
 	int trustout=0,clrtrust=0,clrreject=0,aliasout=0,clrext=0;
 	int C=0;
@@ -187,9 +183,7 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int checkend=0,checkoffset=0;
 	unsigned long nmflag = 0, certflag = 0;
-#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-#endif
 
 	reqfile=0;
 
@@ -360,13 +354,17 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
 			}
-#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*argv,"-setalias") == 0)
+			{
+			if (--argc < 1) goto bad;
+			alias= *(++argv);
+			trustout = 1;
+			}
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-#endif
 		else if (strcmp(*argv,"-C") == 0)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
@@ -381,11 +379,8 @@ int MAIN(int argc, char **argv)
 			x509req= ++num;
 		else if (strcmp(*argv,"-text") == 0)
 			text= ++num;
-		else if (strcmp(*argv,"-hash") == 0
-			|| strcmp(*argv,"-subject_hash") == 0)
-			subject_hash= ++num;
-		else if (strcmp(*argv,"-issuer_hash") == 0)
-			issuer_hash= ++num;
+		else if (strcmp(*argv,"-hash") == 0)
+			hash= ++num;
 		else if (strcmp(*argv,"-subject") == 0)
 			subject= ++num;
 		else if (strcmp(*argv,"-issuer") == 0)
@@ -455,9 +450,7 @@ bad:
 		goto end;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
-#endif
 
 	if (need_rand)
 		app_RAND_load_file(NULL, bio_err, 0);
@@ -486,7 +479,7 @@ bad:
 
 	if (extfile)
 		{
-		long errorline = -1;
+		long errorline;
 		X509V3_CTX ctx2;
 		extconf = NCONF_new(NULL);
 		if (!NCONF_load(extconf, extfile,&errorline))
@@ -712,14 +705,10 @@ bad:
 				if (alstr) BIO_printf(STDout,"%s\n", alstr);
 				else BIO_puts(STDout,"<No Alias>\n");
 				}
-			else if (subject_hash == i)
+			else if (hash == i)
 				{
 				BIO_printf(STDout,"%08lx\n",X509_subject_name_hash(x));
 				}
-			else if (issuer_hash == i)
-				{
-				BIO_printf(STDout,"%08lx\n",X509_issuer_name_hash(x));
-				}
 			else if (pprint == i)
 				{
 				X509_PURPOSE *ptmp;
@@ -781,11 +770,10 @@ bad:
 				int y,z;
 
 				X509_NAME_oneline(X509_get_subject_name(x),
-					buf,sizeof buf);
+					buf,256);
 				BIO_printf(STDout,"/* subject:%s */\n",buf);
 				m=X509_NAME_oneline(
-					X509_get_issuer_name(x),buf,
-					sizeof buf);
+					X509_get_issuer_name(x),buf,256);
 				BIO_printf(STDout,"/* issuer :%s */\n",buf);
 
 				z=i2d_X509(x,NULL);
@@ -873,18 +861,14 @@ bad:
 				if (Upkey == NULL)
 					{
 					Upkey=load_key(bio_err,
-						keyfile, keyformat, 0,
-						passin, e, "Private key");
+						keyfile,keyformat, passin, e,
+						"Private key");
 					if (Upkey == NULL) goto end;
 					}
 #ifndef OPENSSL_NO_DSA
 		                if (Upkey->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
 #endif
-#ifndef OPENSSL_NO_ECDSA
-				if (Upkey->type == EVP_PKEY_EC)
-					digest=EVP_ecdsa();
-#endif
 
 				assert(need_rand);
 				if (!sign(x,Upkey,days,clrext,digest,
@@ -896,19 +880,14 @@ bad:
 				if (CAkeyfile != NULL)
 					{
 					CApkey=load_key(bio_err,
-						CAkeyfile, CAkeyformat,
-						0, passin, e,
-						"CA Private Key");
+						CAkeyfile,CAkeyformat, passin,
+						e, "CA Private Key");
 					if (CApkey == NULL) goto end;
 					}
 #ifndef OPENSSL_NO_DSA
 		                if (CApkey->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
 #endif
-#ifndef OPENSSL_NO_ECDSA
-				if (CApkey->type == EVP_PKEY_EC)
-					digest = EVP_ecdsa();
-#endif
 				
 				assert(need_rand);
 				if (!x509_certify(ctx,CAfile,digest,x,xca,
@@ -929,21 +908,15 @@ bad:
 				else
 					{
 					pk=load_key(bio_err,
-						keyfile, FORMAT_PEM, 0,
-						passin, e, "request key");
+						keyfile,FORMAT_PEM, passin, e,
+						"request key");
 					if (pk == NULL) goto end;
 					}
 
 				BIO_printf(bio_err,"Generating certificate request\n");
 
-#ifndef OPENSSL_NO_DSA
 		                if (pk->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
-#endif
-#ifndef OPENSSL_NO_ECDSA
-				if (pk->type == EVP_PKEY_EC)
-					digest=EVP_ecdsa();
-#endif
 
 				rq=X509_to_X509_REQ(x,pk,digest);
 				EVP_PKEY_free(pk);
@@ -1040,47 +1013,108 @@ end:
 	sk_ASN1_OBJECT_pop_free(reject, ASN1_OBJECT_free);
 	if (passin) OPENSSL_free(passin);
 	apps_shutdown();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
-static ASN1_INTEGER *x509_load_serial(char *CAfile, char *serialfile, int create)
+static ASN1_INTEGER *load_serial(char *CAfile, char *serialfile, int create)
 	{
 	char *buf = NULL, *p;
-	ASN1_INTEGER *bs = NULL;
+	MS_STATIC char buf2[1024];
+	ASN1_INTEGER *bs = NULL, *bs2 = NULL;
+	BIO *io = NULL;
 	BIGNUM *serial = NULL;
-	size_t len;
 
-	len = ((serialfile == NULL)
-		?(strlen(CAfile)+strlen(POSTFIX)+1)
-		:(strlen(serialfile)))+1;
-	buf=OPENSSL_malloc(len);
+	buf=OPENSSL_malloc( ((serialfile == NULL)
+			?(strlen(CAfile)+strlen(POSTFIX)+1)
+			:(strlen(serialfile)))+1);
 	if (buf == NULL) { BIO_printf(bio_err,"out of mem\n"); goto end; }
 	if (serialfile == NULL)
 		{
-		BUF_strlcpy(buf,CAfile,len);
+		strcpy(buf,CAfile);
 		for (p=buf; *p; p++)
 			if (*p == '.')
 				{
 				*p='\0';
 				break;
 				}
-		BUF_strlcat(buf,POSTFIX,len);
+		strcat(buf,POSTFIX);
 		}
 	else
-		BUF_strlcpy(buf,serialfile,len);
+		strcpy(buf,serialfile);
+	serial=BN_new();
+	bs=ASN1_INTEGER_new();
+	if ((serial == NULL) || (bs == NULL))
+		{
+		ERR_print_errors(bio_err);
+		goto end;
+		}
 
-	serial = load_serial(buf, create, NULL);
-	if (serial == NULL) goto end;
+	io=BIO_new(BIO_s_file());
+	if (io == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+	
+	if (BIO_read_filename(io,buf) <= 0)
+		{
+		if (!create)
+			{
+			perror(buf);
+			goto end;
+			}
+		else
+			{
+			ASN1_INTEGER_set(bs,1);
+			BN_one(serial);
+			}
+		}
+	else 
+		{
+		if (!a2i_ASN1_INTEGER(io,bs,buf2,1024))
+			{
+			BIO_printf(bio_err,"unable to load serial number from %s\n",buf);
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		else
+			{
+			serial=BN_bin2bn(bs->data,bs->length,serial);
+			if (serial == NULL)
+				{
+				BIO_printf(bio_err,"error converting bin 2 bn");
+				goto end;
+				}
+			}
+		}
 
 	if (!BN_add_word(serial,1))
 		{ BIO_printf(bio_err,"add_word failure\n"); goto end; }
+	if (!(bs2 = BN_to_ASN1_INTEGER(serial, NULL)))
+		{ BIO_printf(bio_err,"error converting bn 2 asn1_integer\n"); goto end; }
+	if (BIO_write_filename(io,buf) <= 0)
+		{
+		BIO_printf(bio_err,"error attempting to write serial number file\n");
+		perror(buf);
+		goto end;
+		}
+	i2a_ASN1_INTEGER(io,bs2);
+	BIO_puts(io,"\n");
 
-	if (!save_serial(buf, NULL, serial, &bs)) goto end;
-
- end:
+	BIO_free(io);
 	if (buf) OPENSSL_free(buf);
+	ASN1_INTEGER_free(bs2);
 	BN_free(serial);
+	io=NULL;
 	return bs;
+
+	end:
+	if (buf) OPENSSL_free(buf);
+	BIO_free(io);
+	ASN1_INTEGER_free(bs);
+	BN_free(serial);
+	return NULL;
+
 	}
 
 static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
@@ -1102,10 +1136,10 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 		goto end;
 		}
 	if (sno) bs = sno;
-	else if (!(bs = x509_load_serial(CAfile, serialfile, create)))
+	else if (!(bs = load_serial(CAfile, serialfile, create)))
 		goto end;
 
-/*	if (!X509_STORE_add_cert(ctx,x)) goto end;*/
+	if (!X509_STORE_add_cert(ctx,x)) goto end;
 
 	/* NOTE: this certificate can/should be self signed, unless it was
 	 * a certificate request in which case it is not. */

bugs/SSLv3

@@ -29,7 +29,7 @@ RC4-MD5, but a re-connect tries to use DES-CBC-SHA.  So netscape, when
 doing a re-connect, always takes the first cipher in the cipher list.
 
 If we accept a netscape connection, demand a client cert, have a
-non-self-signed CA which does not have it's CA in netscape, and the
+non-self-sighed CA which does not have it's CA in netscape, and the
 browser has a cert, it will crash/hang.  Works for 3.x and 4.xbeta
 
 Netscape browsers do not really notice the server sending a

certs/expired/vsign3.pem

@@ -1,18 +0,0 @@
-subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
-notBefore=Jan 29 00:00:00 1996 GMT
-notAfter=Jan  7 23:59:59 2004 GMT
------BEGIN CERTIFICATE-----
-MIICPTCCAaYCEQDknv3zOugOz6URPhmkJAIyMA0GCSqGSIb3DQEBAgUAMF8xCzAJ
-BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xh
-c3MgMyBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05
-NjAxMjkwMDAwMDBaFw0wNDAxMDcyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYD
-VQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMyBQdWJsaWMgUHJp
-bWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOB
-jQAwgYkCgYEAyVxZnvIbigEUtBDfBEDb41evakVAj4QMC9Ez2dkRz+4CWB8l9yqo
-RAWq7AMfeH+ek7maAKojfdashaJjRcdyJ8z0TMZ1cdI5709C8HXfCpDGjiBvmA/4
-rCNfcCk2pMmG57GaIMtTpYXnPb59mv4kRTPcdhXtD6JxZExlLoFoRacCAwEAATAN
-BgkqhkiG9w0BAQIFAAOBgQBhcOwvP579K+ZoVCGwZ3kIDCCWMYoNer62Jt95LCJp
-STbjl3diYaIy13pUITa6Ask05yXaRDWw0lyAXbOU+Pms7qRgdSoflUkjsUp89LNH
-ciFbfperVKxi513srpvSybIk+4Kt6WcVS7qqpvCXoPawl1cAyAw8CaCCBLpB2veZ
-pA==
------END CERTIFICATE-----

certs/vsign3.pem

@@ -1,17 +1,18 @@
 subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
 notBefore=Jan 29 00:00:00 1996 GMT
-notAfter=Aug  1 23:59:59 2028 GMT
+notAfter=Jan  7 23:59:59 2004 GMT
 -----BEGIN CERTIFICATE-----
-MIICPDCCAaUCEHC65B0Q2Sk0tjjKewPMur8wDQYJKoZIhvcNAQECBQAwXzELMAkG
-A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz
-cyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2
-MDEyOTAwMDAwMFoXDTI4MDgwMTIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV
-BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmlt
-YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN
-ADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhE
-BarsAx94f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/is
-I19wKTakyYbnsZogy1Olhec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0G
-CSqGSIb3DQEBAgUAA4GBALtMEivPLCYATxQT3ab7/AoRhIzzKBxnki98tsX63/Do
-lbwdj2wsqFHMc9ikwFPwTtYmwHYBV4GSXiHx0bH/59AhWM1pF+NEHJwZRDmJXNyc
-AA9WjQKZ7aKQRUzkuxCkPfAyAw7xzvjoyVGM5mKf5p/AfbdynMk2OmufTqj/ZA1k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 -----END CERTIFICATE-----

config

@@ -74,27 +74,34 @@ if [ "x$XREL" != "x" ]; then
 		echo "whatever-whatever-sco5"; exit 0
 		;;
 	    4.2MP)
-		case "x${VERSION}" in
-		    x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
-		    x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
-		    x2*)   echo "whatever-whatever-unixware2";  exit 0 ;;
-		esac
+		if [ "x$VERSION" = "x2.01" ]; then
+		    echo "${MACHINE}-whatever-unixware201"; exit 0
+		elif [ "x$VERSION" = "x2.02" ]; then
+		    echo "${MACHINE}-whatever-unixware202"; exit 0
+		elif [ "x$VERSION" = "x2.03" ]; then
+		    echo "${MACHINE}-whatever-unixware203"; exit 0
+		elif [ "x$VERSION" = "x2.1.1" ]; then
+		    echo "${MACHINE}-whatever-unixware211"; exit 0
+		elif [ "x$VERSION" = "x2.1.2" ]; then
+		    echo "${MACHINE}-whatever-unixware212"; exit 0
+		elif [ "x$VERSION" = "x2.1.3" ]; then
+		    echo "${MACHINE}-whatever-unixware213"; exit 0
+		else
+		    echo "${MACHINE}-whatever-unixware2"; exit 0
+		fi
 		;;
 	    4.2)
 		echo "whatever-whatever-unixware1"; exit 0
 		;;
+	    OpenUNIX)
+		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
+		    echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+		fi
+		;;
 	    5)
-		case "x${VERSION}" in
-		    # We hardcode i586 in place of ${MACHINE} for the
-		    # following reason. The catch is that even though Pentium
-		    # is minimum requirement for platforms in question,
-		    # ${MACHINE} gets always assigned to i386. Now, problem
-		    # with i386 is that it makes ./config pass 386 to
-		    # ./Configure, which in turn makes make generate
-		    # inefficient SHA-1 (for this moment) code.
-		    x7*)  echo "i586-sco-unixware7";           exit 0 ;;
-		    x8*)  echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
-		esac
+		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
+		    echo "${MACHINE}-sco-unixware7"; exit 0
+		fi
 		;;
 	esac
     fi
@@ -134,7 +141,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "$HPUXVER" in
 	    1[0-9].*)	# HPUX 10 and 11 targets are unified
-		echo "${MACHINE}-hp-hpux1x"; exit 0
+		echo "${MACHINE}-hp-hpux10"; exit 0
 		;;
 	    *)
 		echo "${MACHINE}-hp-hpux"; exit 0
@@ -189,7 +196,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "${MACHINE}-whatever-bsdi"; exit 0
 	;;
 
-    FreeBSD:*:*:*386*)
+    FreeBSD:*)
         VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
         MACH=`sysctl -n hw.model`
         ARCH='whatever'
@@ -198,6 +205,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
            *486*       ) MACH="i486"     ;;
            Pentium\ II*) MACH="i686"     ;;
            Pentium*    ) MACH="i586"     ;;
+           Alpha*      ) MACH="alpha"    ;;
            *           ) MACH="$MACHINE" ;;
         esac
         case ${MACH} in
@@ -206,10 +214,6 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
         echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
         ;;
 
-    FreeBSD:*)
-	echo "${MACHINE}-whatever-freebsd"; exit 0
-	;;
-
     NetBSD:*:*:*386*)
         echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
 	;;
@@ -347,10 +351,6 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
     *CRAY*)
        echo "j90-cray-unicos"; exit 0;
        ;;
-
-    NONSTOP_KERNEL*)
-       echo "nsr-tandem-nsk"; exit 0;
-       ;;
 esac
 
 #
@@ -390,34 +390,18 @@ exit 0
 
 # figure out if gcc is available and if so we use it otherwise
 # we fallback to whatever cc does on the system
-GCCVER=`(gcc -dumpversion) 2>/dev/null`
+GCCVER=`(gcc --version) 2>/dev/null`
 if [ "$GCCVER" != "" ]; then
   CC=gcc
-  # then strip off whatever prefix egcs prepends the number with...
-  # Hopefully, this will work for any future prefixes as well.
-  GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
-  # Since gcc 3.1 gcc --version behaviour has changed.  gcc -dumpversion
-  # does give us what we want though, so we use that.  We just just the
-  # major and minor version numbers.
+  # then strip off whatever prefix Cygnus prepends the number with...
+  GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
   # peak single digit before and after first dot, e.g. 2.95.1 gives 29
   GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
 else
   CC=cc
 fi
 GCCVER=${GCCVER:-0}
-if [ "$SYSTEM" = "HP-UX" ];then
-  # By default gcc is a ILP32 compiler (with long long == 64).
-  GCC_BITS="32"
-  if [ $GCCVER -ge 30 ]; then
-    # PA64 support only came in with gcc 3.0.x.
-    # We check if the preprocessor symbol __LP64__ is defined...
-    if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
-      : # __LP64__ has slipped through, it therefore is not defined
-    else
-      GCC_BITS="64"
-    fi
-  fi
-fi
+
 if [ "$SYSTEM" = "SunOS" ]; then
   if [ $GCCVER -ge 30 ]; then
     # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
@@ -458,10 +442,6 @@ if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
   fi
 fi
 
-if [ "${SYSTEM}" = "AIX" ]; then	# favor vendor cc over gcc
-    (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
-fi
-
 CCVER=${CCVER:-0}
 
 # read the output of the embedded GuessOS 
@@ -474,7 +454,7 @@ echo Operating system: $GUESSOS
 # more time that I want to waste at the moment
 case "$GUESSOS" in
   mips2-sgi-irix)
-	CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+	CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
 	CPU=${CPU:-0}
 	if [ $CPU -ge 4000 ]; then
 		options="$options -mips2"
@@ -482,7 +462,7 @@ case "$GUESSOS" in
 	OUT="irix-$CC"
 	;;
   mips3-sgi-irix)
-	CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+	CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
 	CPU=${CPU:-0}
 	if [ $CPU -ge 5000 ]; then
 		options="$options -mips4"
@@ -498,7 +478,7 @@ case "$GUESSOS" in
 	  echo "         You have about 5 seconds to press Ctrl-C to abort."
 	  (stty -icanon min 0 time 50; read waste) < /dev/tty
 	fi
-        CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+        CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
         CPU=${CPU:-0}
         if [ $CPU -ge 5000 ]; then
                 options="$options -mips4"
@@ -548,13 +528,12 @@ EOF
   ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
   i386-apple-darwin*) OUT="darwin-i386-cc" ;;
   sparc64-*-linux2)
-	echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
-	echo "         and wish to build 64-bit library, then you have to"
-	echo "         invoke './Configure linux64-sparcv9' *manually*."
-	if [ "$TEST" = "false" ]; then
-	  echo "          You have about 5 seconds to press Ctrl-C to abort."
-	  (stty -icanon min 0 time 50; read waste) < /dev/tty
-	fi
+	#Before we can uncomment following lines we have to wait at least
+	#till 64-bit glibc for SPARC is operational:-(
+	#echo "WARNING! If you wish to build 64-bit library, then you have to"
+	#echo "         invoke './Configure linux64-sparcv9' *manually*."
+	#echo "         Type return if you want to continue, Ctrl-C to abort."
+	#read waste < /dev/tty
 	OUT="linux-sparcv9" ;;
   sparc-*-linux2)
 	KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
@@ -587,7 +566,6 @@ EOF
   arm*-*-linux2) OUT="linux-elf-arm" ;;
   s390-*-linux2) OUT="linux-s390" ;;
   s390x-*-linux?) OUT="linux-s390x" ;;
-  x86_64-*-linux?) OUT="linux-x86_64" ;;
   *-*-linux2) OUT="linux-elf"
 	if [ "$GCCVER" -gt 28 ]; then
           if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
@@ -641,8 +619,6 @@ EOF
   *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
   *-*-sunos4) OUT="sunos-$CC" ;;
   alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
-  sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
-  ia64-*-freebsd*) OUT="FreeBSD-ia64" ;;
   *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
   *-freebsd[1-2]*) OUT="FreeBSD" ;;
   *86*-*-netbsd) OUT="NetBSD-x86" ;;
@@ -683,25 +659,23 @@ EOF
   RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
   *-siemens-sysv4) OUT="SINIX" ;;
   *-hpux1*)
-	if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
-	    OUT="hpux64-parisc2-gcc"
-	fi
+	OUT="hpux-parisc-$CC"
 	KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
 	KERNEL_BITS=${KERNEL_BITS:-32}
 	CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
 	CPU_VERSION=${CPU_VERSION:-0}
 	# See <sys/unistd.h> for further info on CPU_VERSION.
 	if   [ $CPU_VERSION -ge 768 ]; then	# IA-64 CPU
-	     echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
-	     echo "         If you wish to build 32-bit library, the you have to"
-	     echo "         invoke './Configure hpux-ia64-cc' *manually*."
+	     echo "NOTICE! 64-bit is the only ABI currently operational on HP-UXi."
+	     echo "        Post request to openssl-dev@openssl.org for 32-bit support."
 	     if [ "$TEST" = "false" ]; then
-		echo "         You have about 5 seconds to press Ctrl-C to abort."
 		(stty -icanon min 0 time 50; read waste) < /dev/tty
 	     fi
 	     OUT="hpux64-ia64-cc"
 	elif [ $CPU_VERSION -ge 532 ]; then	# PA-RISC 2.x CPU
-	     OUT=${OUT:-"hpux-parisc2-${CC}"}
+	     if [ "$CC" = "cc" ]; then
+		OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc?
+	     fi
 	     if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
 		echo "WARNING! If you wish to build 64-bit library then you have to"
 		echo "         invoke './Configure hpux64-parisc2-cc' *manually*."
@@ -711,9 +685,9 @@ EOF
 		fi
 	     fi
 	elif [ $CPU_VERSION -ge 528 ]; then	# PA-RISC 1.1+ CPU
-	     OUT="hpux-parisc-${CC}
+	     :
 	elif [ $CPU_VERSION -ge 523 ]; then	# PA-RISC 1.0 CPU
-	     OUT="hpux-parisc-${CC}
+	     :
 	else					# Motorola(?) CPU
 	     OUT="hpux-$CC"
 	fi
@@ -727,7 +701,6 @@ EOF
   *-*-cygwin) OUT="Cygwin" ;;
   t3e-cray-unicosmk) OUT="cray-t3e" ;;
   j90-cray-unicos) OUT="cray-j90" ;;
-  nsr-tandem-nsk) OUT="tandem-c89" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 
@@ -762,7 +735,7 @@ case "$GUESSOS" in
   i386-*) options="$options 386" ;;
 esac
 
-for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
+for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 rijndael ripemd rsa sha
 do
   if [ ! -d crypto/$i ]
   then

crypto/Makefile.ssl

@@ -26,33 +26,31 @@ CFLAGS= $(INCLUDE) $(CFLAG)
 
 LIBS=
 
-SDIRS=	objects \
-	md2 md4 md5 sha mdc2 hmac ripemd \
+SDIRS=	md2 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
-	bn ec rsa dsa ecdsa ecdh dh dso engine aes \
-	buffer bio stack lhash rand err \
-	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-	store
+	bn ec rsa dsa dh dso engine aes \
+	buffer bio stack lhash rand err objects \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5
 
 GENERAL=Makefile README crypto-lib.com install.com
 
 LIB= $(TOP)/libcrypto.a
 SHARED_LIB= libcrypto$(SHLIB_EXT)
-LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c o_str.c
-LIBOBJ= cryptlib.o mem.o mem_clr.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o o_str.o
+LIBSRC=	cryptlib.c mem.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c
+LIBOBJ= cryptlib.o mem.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o
 
 SRC= $(LIBSRC)
 
 EXHEADER= crypto.h tmdiff.h opensslv.h opensslconf.h ebcdic.h symhacks.h \
 	ossl_typ.h
-HEADER=	cryptlib.h buildinf.h md32_common.h o_time.h o_str.h $(EXHEADER)
+HEADER=	cryptlib.h buildinf.h md32_common.h o_time.h $(EXHEADER)
 
 ALL=    $(GENERAL) $(SRC) $(HEADER)
 
 top:
 	@(cd ..; $(MAKE) DIRS=$(DIR) all)
 
-all: shared
+all: buildinf.h lib subdirs shared
 
 buildinf.h: ../Makefile.ssl
 	( echo "#ifndef MK1MF_BUILD"; \
@@ -83,11 +81,11 @@ files:
 	done;
 
 links:
-	@sh $(TOP)/util/point.sh Makefile.ssl Makefile
+	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mklink.pl ../include/openssl $(EXHEADER)
 	@$(PERL) $(TOP)/util/mklink.pl ../test $(TEST)
 	@$(PERL) $(TOP)/util/mklink.pl ../apps $(APPS)
-	@sh $(TOP)/util/point.sh Makefile.ssl Makefile
+	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@for i in $(SDIRS); do \
 	(cd $$i && echo "making links in crypto/$$i..." && \
 	$(MAKE) CC='$(CC)' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' AR='${AR}' PERL='${PERL}' links ); \
@@ -98,9 +96,9 @@ lib:	$(LIBOBJ)
 	$(RANLIB) $(LIB) || echo Never mind.
 	@touch lib
 
-shared: buildinf.h lib subdirs
+shared:
 	if [ -n "$(SHARED_LIBS)" ]; then \
-		(cd ..; $(MAKE) $(SHARED_LIB)); \
+		(cd ..; make $(SHARED_LIB)); \
 	fi
 
 libs:
@@ -138,12 +136,12 @@ lint:
 
 depend:
 	if [ ! -f buildinf.h ]; then touch buildinf.h; fi # fake buildinf.h if it does not exist
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDE) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDE) $(DEPFLAG) $(PROGS) $(LIBSRC)
 	if [ ! -s buildinf.h ]; then rm buildinf.h; fi
 	@for i in $(SDIRS) ;\
 	do \
 	(cd $$i && echo "making depend in crypto/$$i..." && \
-	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ); \
+	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' DEPFLAG='${DEPFLAG}' depend ); \
 	done;
 
 clean:
@@ -182,7 +180,7 @@ cversion.o: ../include/openssl/err.h ../include/openssl/lhash.h
 cversion.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 cversion.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 cversion.o: ../include/openssl/symhacks.h buildinf.h cryptlib.h cversion.c
-ebcdic.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h ebcdic.c
+ebcdic.o: ../include/openssl/opensslconf.h ebcdic.c
 ex_data.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
 ex_data.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
 ex_data.o: ../include/openssl/err.h ../include/openssl/lhash.h
@@ -195,18 +193,12 @@ mem.o: ../include/openssl/err.h ../include/openssl/lhash.h
 mem.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 mem.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 mem.o: ../include/openssl/symhacks.h cryptlib.h mem.c
-mem_clr.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-mem_clr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-mem_clr.o: ../include/openssl/safestack.h ../include/openssl/stack.h
-mem_clr.o: ../include/openssl/symhacks.h mem_clr.c
 mem_dbg.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
 mem_dbg.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
 mem_dbg.o: ../include/openssl/err.h ../include/openssl/lhash.h
 mem_dbg.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 mem_dbg.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 mem_dbg.o: ../include/openssl/symhacks.h cryptlib.h mem_dbg.c
-o_str.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h o_str.c
-o_str.o: o_str.h
 o_time.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h o_time.c
 o_time.o: o_time.h
 tmdiff.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h

crypto/aes/Makefile.ssl

@@ -52,7 +52,7 @@ files:
 	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO
 
 links:
-	@sh $(TOP)/util/point.sh Makefile.ssl Makefile
+	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
 	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
 	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
@@ -75,7 +75,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new

crypto/aes/aes.h

@@ -52,15 +52,12 @@
 #ifndef HEADER_AES_H
 #define HEADER_AES_H
 
-#include <openssl/opensslconf.h>
-
 #ifdef OPENSSL_NO_AES
 #error AES is disabled.
 #endif
 
-#define AES_ENCRYPT	1
-#define AES_DECRYPT	0
-
+static const int AES_DECRYPT = 0;
+static const int AES_ENCRYPT = 1;
 /* Because array size can't be a const in C, the following two are macros.
    Both sizes are in bytes. */
 #define AES_MAXNR 14
@@ -97,23 +94,12 @@ void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
 void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char *ivec, int *num, const int enc);
-void AES_cfb1_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char *ivec, int *num, const int enc);
-void AES_cfb8_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char *ivec, int *num, const int enc);
-void AES_cfbr_encrypt_block(const unsigned char *in,unsigned char *out,
-			    const int nbits,const AES_KEY *key,
-			    unsigned char *ivec,const int enc);
 void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char *ivec, int *num);
 void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
-	unsigned char ivec[AES_BLOCK_SIZE],
-	unsigned char ecount_buf[AES_BLOCK_SIZE],
-	unsigned int *num);
+	unsigned char *counter, unsigned int *num);
 
 
 #ifdef  __cplusplus

crypto/aes/aes_cbc.c

@@ -49,13 +49,7 @@
  *
  */
 
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
 #include <assert.h>
-
 #include <openssl/aes.h>
 #include "aes_locl.h"
 
@@ -63,49 +57,33 @@ void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
 		     const unsigned long length, const AES_KEY *key,
 		     unsigned char *ivec, const int enc) {
 
-	unsigned long n;
+	int n;
 	unsigned long len = length;
-	unsigned char tmp[AES_BLOCK_SIZE];
+	unsigned char tmp[16];
 
 	assert(in && out && key && ivec);
+	assert(length % AES_BLOCK_SIZE == 0);
 	assert((AES_ENCRYPT == enc)||(AES_DECRYPT == enc));
 
-	if (AES_ENCRYPT == enc) {
-		while (len >= AES_BLOCK_SIZE) {
-			for(n=0; n < AES_BLOCK_SIZE; ++n)
+	if (AES_ENCRYPT == enc)
+		while (len > 0) {
+			for(n=0; n < 16; ++n)
 				tmp[n] = in[n] ^ ivec[n];
 			AES_encrypt(tmp, out, key);
-			memcpy(ivec, out, AES_BLOCK_SIZE);
-			len -= AES_BLOCK_SIZE;
-			in += AES_BLOCK_SIZE;
-			out += AES_BLOCK_SIZE;
+			memcpy(ivec, out, 16);
+			len -= 16;
+			in += 16;
+			out += 16;
 		}
-		if (len) {
-			for(n=0; n < len; ++n)
-				tmp[n] = in[n] ^ ivec[n];
-			for(n=len; n < AES_BLOCK_SIZE; ++n)
-				tmp[n] = ivec[n];
-			AES_encrypt(tmp, tmp, key);
-			memcpy(out, tmp, AES_BLOCK_SIZE);
-			memcpy(ivec, tmp, AES_BLOCK_SIZE);
-		}			
-	} else {
-		while (len >= AES_BLOCK_SIZE) {
-			memcpy(tmp, in, AES_BLOCK_SIZE);
+	else
+		while (len > 0) {
+			memcpy(tmp, in, 16);
 			AES_decrypt(in, out, key);
-			for(n=0; n < AES_BLOCK_SIZE; ++n)
+			for(n=0; n < 16; ++n)
 				out[n] ^= ivec[n];
-			memcpy(ivec, tmp, AES_BLOCK_SIZE);
-			len -= AES_BLOCK_SIZE;
-			in += AES_BLOCK_SIZE;
-			out += AES_BLOCK_SIZE;
+			memcpy(ivec, tmp, 16);
+			len -= 16;
+			in += 16;
+			out += 16;
 		}
-		if (len) {
-			memcpy(tmp, in, AES_BLOCK_SIZE);
-			AES_decrypt(tmp, tmp, key);
-			for(n=0; n < len; ++n)
-				out[n] = tmp[n] ^ ivec[n];
-			memcpy(ivec, tmp, AES_BLOCK_SIZE);
-		}			
-	}
 }

crypto/aes/aes_cfb.c

@@ -105,13 +105,7 @@
  * [including the GNU Public Licence.]
  */
 
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
 #include <assert.h>
-
 #include <openssl/aes.h>
 #include "aes_locl.h"
 
@@ -155,96 +149,3 @@ void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
 	*num=n;
 }
 
-/* This expects a single block of size nbits for both in and out. Note that
-   it corrupts any extra bits in the last byte of out */
-/* Untested, once it is working, it will be optimised */
-void AES_cfbr_encrypt_block(const unsigned char *in,unsigned char *out,
-			    const int nbits,const AES_KEY *key,
-			    unsigned char *ivec,const int enc)
-    {
-    int n;
-    unsigned char ovec[AES_BLOCK_SIZE*2];
-
-    assert(in && out && key && ivec);
-    if(enc)
-	{
-	/* construct the new IV */
-	AES_encrypt(ivec,ovec,key);
-	/* encrypt the input */
-	for(n=0 ; n < (nbits+7)/8 ; ++n)
-	    out[n]=in[n]^ovec[n];
-	/* fill in the first half of the new IV with the current IV */
-	memcpy(ovec,ivec,AES_BLOCK_SIZE);
-	/* and put the ciphertext in the second half */
-	memcpy(ovec+AES_BLOCK_SIZE,out,(nbits+7)/8);
-	/* shift ovec left most of the bits... */
-	memmove(ovec,ovec+nbits/8,AES_BLOCK_SIZE+(nbits%8 ? 1 : 0));
-	/* now the remaining bits */
-	if(nbits%8 != 0)
-	    for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-		{
-		ovec[n]<<=nbits%8;
-		ovec[n]|=ovec[n+1]>>(8-nbits%8);
-		}
-	/* finally, move it back into place */
-	memcpy(ivec,ovec,AES_BLOCK_SIZE);
-	}
-    else
-	{
-	/* construct the new IV in the first half of ovec */
-	AES_encrypt(ivec,ovec,key);
-	/* decrypt the input */
-	for(n=0 ; n < (nbits+7)/8 ; ++n)
-	    out[n]=in[n]^ovec[n];
-	/* fill in the first half of the new IV with the current IV */
-	memcpy(ovec,ivec,AES_BLOCK_SIZE);
-	/* append the ciphertext */
-	memcpy(ovec+AES_BLOCK_SIZE,in,(nbits+7)/8);
-	/* shift ovec left most of the bits... */
-	memmove(ovec,ovec+nbits/8,AES_BLOCK_SIZE+(nbits%8 ? 1 : 0));
-	/* now the remaining bits */
-	if(nbits%8 != 0)
-	    for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-		{
-		ovec[n]<<=nbits%8;
-		ovec[n]|=ovec[n+1]>>(8-nbits%8);
-		}
-	/* finally, move it back into place */
-	memcpy(ivec,ovec,AES_BLOCK_SIZE);
-	}
-    /* it is not necessary to cleanse ovec, since the IV is not secret */
-    }
-
-/* N.B. This expects the input to be packed, MS bit first */
-void AES_cfb1_encrypt(const unsigned char *in, unsigned char *out,
-		      const unsigned long length, const AES_KEY *key,
-		      unsigned char *ivec, int *num, const int enc)
-    {
-    unsigned int n;
-    unsigned char c[1],d[1];
-
-    assert(in && out && key && ivec && num);
-    assert(*num == 0);
-
-    memset(out,0,(length+7)/8);
-    for(n=0 ; n < length ; ++n)
-	{
-	c[0]=(in[n/8]&(1 << (7-n%8))) ? 0x80 : 0;
-	AES_cfbr_encrypt_block(c,d,1,key,ivec,enc);
-	out[n/8]=(out[n/8]&~(1 << (7-n%8)))|((d[0]&0x80) >> (n%8));
-	}
-    }
-
-void AES_cfb8_encrypt(const unsigned char *in, unsigned char *out,
-		      const unsigned long length, const AES_KEY *key,
-		      unsigned char *ivec, int *num, const int enc)
-    {
-    unsigned int n;
-
-    assert(in && out && key && ivec && num);
-    assert(*num == 0);
-
-    for(n=0 ; n < length ; ++n)
-	AES_cfbr_encrypt_block(&in[n],&out[n],8,key,ivec,enc);
-    }
-

crypto/aes/aes_core.c

@@ -28,13 +28,7 @@
 /* Note: rewritten a little bit to provide error control and an OpenSSL-
    compatible API */
 
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
 #include <assert.h>
-
 #include <stdlib.h>
 #include <openssl/aes.h>
 #include "aes_locl.h"
@@ -750,7 +744,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[2] = GETU32(userKey +  8);
 	rk[3] = GETU32(userKey + 12);
 	if (bits == 128) {
-		while (1) {
+		for (;;) {
 			temp  = rk[3];
 			rk[4] = rk[0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -770,7 +764,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[4] = GETU32(userKey + 16);
 	rk[5] = GETU32(userKey + 20);
 	if (bits == 192) {
-		while (1) {
+		for (;;) {
 			temp = rk[ 5];
 			rk[ 6] = rk[ 0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -792,7 +786,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[6] = GETU32(userKey + 24);
 	rk[7] = GETU32(userKey + 28);
 	if (bits == 256) {
-		while (1) {
+		for (;;) {
 			temp = rk[ 7];
 			rk[ 8] = rk[ 0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^

crypto/aes/aes_ctr.c

@@ -49,89 +49,67 @@
  *
  */
 
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
 #include <assert.h>
-
 #include <openssl/aes.h>
 #include "aes_locl.h"
 
-/* NOTE: the IV/counter CTR mode is big-endian.  The rest of the AES code
+/* NOTE: CTR mode is big-endian.  The rest of the AES code
  * is endian-neutral. */
 
-/* increment counter (128-bit int) by 1 */
+/* increment counter (128-bit int) by 2^64 */
 static void AES_ctr128_inc(unsigned char *counter) {
 	unsigned long c;
 
-	/* Grab bottom dword of counter and increment */
-	c = GETU32(counter + 12);
+	/* Grab 3rd dword of counter and increment */
+#ifdef L_ENDIAN
+	c = GETU32(counter + 8);
 	c++;
-	PUTU32(counter + 12, c);
-
-	/* if no overflow, we're done */
-	if (c)
-		return;
-
-	/* Grab 1st dword of counter and increment */
-	c = GETU32(counter +  8);
+	PUTU32(counter + 8, c);
+#else
+	c = GETU32(counter + 4);
 	c++;
-	PUTU32(counter +  8, c);
-
-	/* if no overflow, we're done */
-	if (c)
-		return;
-
-	/* Grab 2nd dword of counter and increment */
-	c = GETU32(counter +  4);
-	c++;
-	PUTU32(counter +  4, c);
+	PUTU32(counter + 4, c);
+#endif
 
 	/* if no overflow, we're done */
 	if (c)
 		return;
 
 	/* Grab top dword of counter and increment */
+#ifdef L_ENDIAN
+	c = GETU32(counter + 12);
+	c++;
+	PUTU32(counter + 12, c);
+#else
 	c = GETU32(counter +  0);
 	c++;
 	PUTU32(counter +  0, c);
+#endif
+
 }
 
 /* The input encrypted as though 128bit counter mode is being
  * used.  The extra state information to record how much of the
- * 128bit block we have used is contained in *num, and the
- * encrypted counter is kept in ecount_buf.  Both *num and
- * ecount_buf must be initialised with zeros before the first
- * call to AES_ctr128_encrypt().
- *
- * This algorithm assumes that the counter is in the x lower bits
- * of the IV (ivec), and that the application has full control over
- * overflow and the rest of the IV.  This implementation takes NO
- * responsability for checking that the counter doesn't overflow
- * into the rest of the IV when incremented.
+ * 128bit block we have used is contained in *num;
  */
 void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
-	unsigned char ivec[AES_BLOCK_SIZE],
-	unsigned char ecount_buf[AES_BLOCK_SIZE],
-	unsigned int *num) {
+	unsigned char *counter, unsigned int *num) {
 
 	unsigned int n;
 	unsigned long l=length;
+	unsigned char tmp[AES_BLOCK_SIZE];
 
 	assert(in && out && key && counter && num);
-	assert(*num < AES_BLOCK_SIZE);
 
 	n = *num;
 
 	while (l--) {
 		if (n == 0) {
-			AES_encrypt(ivec, ecount_buf, key);
- 			AES_ctr128_inc(ivec);
+			AES_encrypt(counter, tmp, key);
+			AES_ctr128_inc(counter);
 		}
-		*(out++) = *(in++) ^ ecount_buf[n];
+		*(out++) = *(in++) ^ tmp[n];
 		n = (n+1) % AES_BLOCK_SIZE;
 	}
 

crypto/aes/aes_ecb.c

@@ -49,13 +49,7 @@
  *
  */
 
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
 #include <assert.h>
-
 #include <openssl/aes.h>
 #include "aes_locl.h"
 

crypto/aes/aes_locl.h

@@ -60,9 +60,12 @@
 
 #include <stdio.h>
 #include <stdlib.h>
-#include <string.h>
 
-#if defined(_MSC_VER) && !defined(OPENSSL_SYS_WINCE)
+#if defined(__STDC__) || defined(OPENSSL_SYS_VMS) || defined(M_XENIX) || defined(OPENSSL_SYS_MSDOS)
+#include <string.h>
+#endif
+
+#ifdef _MSC_VER
 # define SWAP(x) (_lrotl(x, 8) & 0x00ff00ff | _lrotr(x, 8) & 0xff00ff00)
 # define GETU32(p) SWAP(*((u32 *)(p)))
 # define PUTU32(ct, st) { *((u32 *)(ct)) = SWAP((st)); }

crypto/aes/aes_ofb.c

@@ -105,13 +105,7 @@
  * [including the GNU Public Licence.]
  */
 
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
 #include <assert.h>
-
 #include <openssl/aes.h>
 #include "aes_locl.h"
 

crypto/asn1/Makefile.ssl

@@ -33,7 +33,7 @@ LIBSRC=	a_object.c a_bitstr.c a_utctm.c a_gentm.c a_time.c a_int.c a_octet.c \
 	tasn_new.c tasn_fre.c tasn_enc.c tasn_dec.c tasn_utl.c tasn_typ.c \
 	f_int.c f_string.c n_pkey.c \
 	f_enum.c a_hdr.c x_pkey.c a_bool.c x_exten.c \
-	asn1_gen.c asn1_par.c asn1_lib.c asn1_err.c a_meth.c a_bytes.c a_strnid.c \
+	asn1_par.c asn1_lib.c asn1_err.c a_meth.c a_bytes.c a_strnid.c \
 	evp_asn1.c asn_pack.c p5_pbe.c p5_pbev2.c p8_pkey.c asn_moid.c
 LIBOBJ= a_object.o a_bitstr.o a_utctm.o a_gentm.o a_time.o a_int.o a_octet.o \
 	a_print.o a_type.o a_set.o a_dup.o a_d2i_fp.o a_i2d_fp.o \
@@ -45,7 +45,7 @@ LIBOBJ= a_object.o a_bitstr.o a_utctm.o a_gentm.o a_time.o a_int.o a_octet.o \
 	tasn_new.o tasn_fre.o tasn_enc.o tasn_dec.o tasn_utl.o tasn_typ.o \
 	f_int.o f_string.o n_pkey.o \
 	f_enum.o a_hdr.o x_pkey.o a_bool.o x_exten.o \
-	asn1_gen.o asn1_par.o asn1_lib.o asn1_err.o a_meth.o a_bytes.o a_strnid.o \
+	asn1_par.o asn1_lib.o asn1_err.o a_meth.o a_bytes.o a_strnid.o \
 	evp_asn1.o asn_pack.o p5_pbe.o p5_pbev2.o p8_pkey.o asn_moid.o
 
 SRC= $(LIBSRC)
@@ -77,7 +77,7 @@ files:
 	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO
 
 links:
-	@sh $(TOP)/util/point.sh Makefile.ssl Makefile
+	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
 	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
 	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
@@ -98,7 +98,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
@@ -148,11 +148,10 @@ a_digest.o: ../../e_os.h ../../include/openssl/asn1.h
 a_digest.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 a_digest.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
 a_digest.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-a_digest.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-a_digest.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-a_digest.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-a_digest.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-a_digest.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+a_digest.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+a_digest.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
+a_digest.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+a_digest.o: ../../include/openssl/opensslconf.h
 a_digest.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 a_digest.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
 a_digest.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
@@ -262,31 +261,27 @@ a_sign.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 a_sign.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 a_sign.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 a_sign.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-a_sign.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-a_sign.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-a_sign.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-a_sign.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-a_sign.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_sign.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-a_sign.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-a_sign.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-a_sign.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-a_sign.o: ../../include/openssl/x509_vfy.h ../cryptlib.h a_sign.c
-a_strex.o: ../../e_os.h ../../include/openssl/asn1.h
-a_strex.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-a_strex.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_strex.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-a_strex.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-a_strex.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-a_strex.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-a_strex.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-a_strex.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-a_strex.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_strex.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-a_strex.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-a_strex.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_strex.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-a_strex.o: ../cryptlib.h a_strex.c charmap.h
+a_sign.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+a_sign.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+a_sign.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+a_sign.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+a_sign.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+a_sign.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+a_sign.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+a_sign.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+a_sign.o: ../cryptlib.h a_sign.c
+a_strex.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
+a_strex.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
+a_strex.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
+a_strex.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
+a_strex.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
+a_strex.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+a_strex.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+a_strex.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
+a_strex.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+a_strex.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+a_strex.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+a_strex.o: ../../include/openssl/x509_vfy.h a_strex.c charmap.h
 a_strnid.o: ../../e_os.h ../../include/openssl/asn1.h
 a_strnid.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 a_strnid.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
@@ -334,11 +329,10 @@ a_verify.o: ../../e_os.h ../../include/openssl/asn1.h
 a_verify.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 a_verify.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
 a_verify.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-a_verify.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-a_verify.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-a_verify.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-a_verify.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-a_verify.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+a_verify.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+a_verify.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
+a_verify.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+a_verify.o: ../../include/openssl/opensslconf.h
 a_verify.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 a_verify.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
 a_verify.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
@@ -352,28 +346,11 @@ asn1_err.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 asn1_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 asn1_err.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
 asn1_err.o: ../../include/openssl/symhacks.h asn1_err.c
-asn1_gen.o: ../../e_os.h ../../include/openssl/asn1.h
-asn1_gen.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-asn1_gen.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-asn1_gen.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
-asn1_gen.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-asn1_gen.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-asn1_gen.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-asn1_gen.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-asn1_gen.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-asn1_gen.o: ../../include/openssl/opensslconf.h
-asn1_gen.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-asn1_gen.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-asn1_gen.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-asn1_gen.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-asn1_gen.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-asn1_gen.o: ../../include/openssl/x509v3.h ../cryptlib.h asn1_gen.c
 asn1_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-asn1_lib.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
-asn1_lib.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-asn1_lib.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-asn1_lib.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-asn1_lib.o: ../../include/openssl/opensslconf.h
+asn1_lib.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
+asn1_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
+asn1_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+asn1_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 asn1_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 asn1_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
 asn1_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h asn1_lib.c
@@ -391,11 +368,10 @@ asn_moid.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 asn_moid.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
 asn_moid.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 asn_moid.o: ../../include/openssl/dsa.h ../../include/openssl/dso.h
-asn_moid.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-asn_moid.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-asn_moid.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-asn_moid.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-asn_moid.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+asn_moid.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+asn_moid.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
+asn_moid.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+asn_moid.o: ../../include/openssl/opensslconf.h
 asn_moid.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 asn_moid.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
 asn_moid.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
@@ -414,24 +390,24 @@ d2i_pr.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 d2i_pr.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 d2i_pr.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 d2i_pr.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-d2i_pr.o: ../../include/openssl/ec.h ../../include/openssl/err.h
-d2i_pr.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-d2i_pr.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-d2i_pr.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-d2i_pr.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rsa.h
-d2i_pr.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-d2i_pr.o: ../../include/openssl/symhacks.h ../cryptlib.h d2i_pr.c
+d2i_pr.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+d2i_pr.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+d2i_pr.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+d2i_pr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+d2i_pr.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+d2i_pr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+d2i_pr.o: ../cryptlib.h d2i_pr.c
 d2i_pu.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 d2i_pu.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 d2i_pu.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 d2i_pu.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-d2i_pu.o: ../../include/openssl/ec.h ../../include/openssl/err.h
-d2i_pu.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-d2i_pu.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-d2i_pu.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-d2i_pu.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rsa.h
-d2i_pu.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-d2i_pu.o: ../../include/openssl/symhacks.h ../cryptlib.h d2i_pu.c
+d2i_pu.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+d2i_pu.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+d2i_pu.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+d2i_pu.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+d2i_pu.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+d2i_pu.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+d2i_pu.o: ../cryptlib.h d2i_pu.c
 evp_asn1.o: ../../e_os.h ../../include/openssl/asn1.h
 evp_asn1.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
 evp_asn1.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
@@ -469,80 +445,72 @@ i2d_pr.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 i2d_pr.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 i2d_pr.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 i2d_pr.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-i2d_pr.o: ../../include/openssl/ec.h ../../include/openssl/err.h
-i2d_pr.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-i2d_pr.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-i2d_pr.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-i2d_pr.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rsa.h
-i2d_pr.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-i2d_pr.o: ../../include/openssl/symhacks.h ../cryptlib.h i2d_pr.c
+i2d_pr.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+i2d_pr.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+i2d_pr.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+i2d_pr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+i2d_pr.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+i2d_pr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+i2d_pr.o: ../cryptlib.h i2d_pr.c
 i2d_pu.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 i2d_pu.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 i2d_pu.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 i2d_pu.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-i2d_pu.o: ../../include/openssl/ec.h ../../include/openssl/err.h
-i2d_pu.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-i2d_pu.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-i2d_pu.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-i2d_pu.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rsa.h
-i2d_pu.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-i2d_pu.o: ../../include/openssl/symhacks.h ../cryptlib.h i2d_pu.c
+i2d_pu.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+i2d_pu.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+i2d_pu.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+i2d_pu.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+i2d_pu.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+i2d_pu.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+i2d_pu.o: ../cryptlib.h i2d_pu.c
 n_pkey.o: ../../e_os.h ../../include/openssl/asn1.h
 n_pkey.o: ../../include/openssl/asn1_mac.h ../../include/openssl/asn1t.h
 n_pkey.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 n_pkey.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
 n_pkey.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-n_pkey.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-n_pkey.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-n_pkey.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-n_pkey.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-n_pkey.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-n_pkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-n_pkey.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-n_pkey.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-n_pkey.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-n_pkey.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-n_pkey.o: ../cryptlib.h n_pkey.c
+n_pkey.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+n_pkey.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
+n_pkey.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+n_pkey.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+n_pkey.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
+n_pkey.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+n_pkey.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+n_pkey.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+n_pkey.o: ../../include/openssl/x509_vfy.h ../cryptlib.h n_pkey.c
 nsseq.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
 nsseq.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 nsseq.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
 nsseq.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-nsseq.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-nsseq.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-nsseq.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-nsseq.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-nsseq.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-nsseq.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-nsseq.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-nsseq.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-nsseq.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-nsseq.o: ../../include/openssl/x509_vfy.h nsseq.c
+nsseq.o: ../../include/openssl/e_os2.h ../../include/openssl/evp.h
+nsseq.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+nsseq.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+nsseq.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+nsseq.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+nsseq.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+nsseq.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+nsseq.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h nsseq.c
 p5_pbe.o: ../../e_os.h ../../include/openssl/asn1.h
 p5_pbe.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 p5_pbe.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 p5_pbe.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 p5_pbe.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-p5_pbe.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p5_pbe.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p5_pbe.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p5_pbe.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p5_pbe.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-p5_pbe.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-p5_pbe.o: ../../include/openssl/rand.h ../../include/openssl/rsa.h
-p5_pbe.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p5_pbe.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p5_pbe.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p5_pbe.o: ../cryptlib.h p5_pbe.c
+p5_pbe.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+p5_pbe.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+p5_pbe.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+p5_pbe.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+p5_pbe.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
+p5_pbe.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+p5_pbe.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+p5_pbe.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+p5_pbe.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p5_pbe.c
 p5_pbev2.o: ../../e_os.h ../../include/openssl/asn1.h
 p5_pbev2.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 p5_pbev2.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 p5_pbev2.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 p5_pbev2.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-p5_pbev2.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p5_pbev2.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p5_pbev2.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p5_pbev2.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p5_pbev2.o: ../../include/openssl/opensslconf.h
+p5_pbev2.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+p5_pbev2.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+p5_pbev2.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
 p5_pbev2.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 p5_pbev2.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
 p5_pbev2.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
@@ -554,117 +522,106 @@ p8_pkey.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 p8_pkey.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 p8_pkey.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 p8_pkey.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-p8_pkey.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p8_pkey.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p8_pkey.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p8_pkey.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p8_pkey.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-p8_pkey.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-p8_pkey.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-p8_pkey.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p8_pkey.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p8_pkey.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p8_pkey.c
+p8_pkey.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+p8_pkey.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+p8_pkey.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+p8_pkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+p8_pkey.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+p8_pkey.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+p8_pkey.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+p8_pkey.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+p8_pkey.o: ../cryptlib.h p8_pkey.c
 t_bitst.o: ../../e_os.h ../../include/openssl/asn1.h
 t_bitst.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 t_bitst.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
 t_bitst.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 t_bitst.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-t_bitst.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-t_bitst.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-t_bitst.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-t_bitst.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-t_bitst.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-t_bitst.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-t_bitst.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-t_bitst.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-t_bitst.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-t_bitst.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-t_bitst.o: ../cryptlib.h t_bitst.c
+t_bitst.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+t_bitst.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+t_bitst.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+t_bitst.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+t_bitst.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+t_bitst.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+t_bitst.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+t_bitst.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+t_bitst.o: ../../include/openssl/x509v3.h ../cryptlib.h t_bitst.c
 t_crl.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 t_crl.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 t_crl.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
 t_crl.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-t_crl.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-t_crl.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-t_crl.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_crl.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-t_crl.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-t_crl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-t_crl.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-t_crl.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-t_crl.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_crl.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-t_crl.o: ../../include/openssl/x509v3.h ../cryptlib.h t_crl.c
+t_crl.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+t_crl.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
+t_crl.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+t_crl.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+t_crl.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
+t_crl.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+t_crl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+t_crl.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+t_crl.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
+t_crl.o: ../cryptlib.h t_crl.c
 t_pkey.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 t_pkey.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 t_pkey.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 t_pkey.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-t_pkey.o: ../../include/openssl/ec.h ../../include/openssl/err.h
-t_pkey.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-t_pkey.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-t_pkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-t_pkey.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-t_pkey.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_pkey.o: ../cryptlib.h t_pkey.c
+t_pkey.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
+t_pkey.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+t_pkey.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rsa.h
+t_pkey.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
+t_pkey.o: ../../include/openssl/symhacks.h ../cryptlib.h t_pkey.c
 t_req.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 t_req.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 t_req.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
 t_req.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-t_req.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-t_req.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-t_req.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_req.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-t_req.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-t_req.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-t_req.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-t_req.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-t_req.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_req.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-t_req.o: ../../include/openssl/x509v3.h ../cryptlib.h t_req.c
+t_req.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+t_req.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
+t_req.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+t_req.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+t_req.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
+t_req.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+t_req.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+t_req.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+t_req.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
+t_req.o: ../cryptlib.h t_req.c
 t_spki.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 t_spki.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 t_spki.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 t_spki.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-t_spki.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-t_spki.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-t_spki.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-t_spki.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-t_spki.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-t_spki.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-t_spki.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-t_spki.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-t_spki.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-t_spki.o: ../../include/openssl/x509_vfy.h ../cryptlib.h t_spki.c
+t_spki.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+t_spki.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+t_spki.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+t_spki.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+t_spki.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+t_spki.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+t_spki.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+t_spki.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+t_spki.o: ../cryptlib.h t_spki.c
 t_x509.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 t_x509.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 t_x509.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
 t_x509.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-t_x509.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-t_x509.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-t_x509.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_x509.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-t_x509.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-t_x509.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-t_x509.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-t_x509.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-t_x509.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_x509.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-t_x509.o: ../../include/openssl/x509v3.h ../cryptlib.h t_x509.c
+t_x509.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+t_x509.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
+t_x509.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+t_x509.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+t_x509.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
+t_x509.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+t_x509.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+t_x509.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+t_x509.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
+t_x509.o: ../cryptlib.h t_x509.c
 t_x509a.o: ../../e_os.h ../../include/openssl/asn1.h
 t_x509a.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 t_x509a.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
 t_x509a.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-t_x509a.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-t_x509a.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-t_x509a.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_x509a.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-t_x509a.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-t_x509a.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-t_x509a.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-t_x509a.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-t_x509a.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_x509a.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-t_x509a.o: ../cryptlib.h t_x509a.c
+t_x509a.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+t_x509a.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
+t_x509a.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+t_x509a.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+t_x509a.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
+t_x509a.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+t_x509a.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+t_x509a.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+t_x509a.o: ../../include/openssl/x509_vfy.h ../cryptlib.h t_x509a.c
 tasn_dec.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
 tasn_dec.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 tasn_dec.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
@@ -719,26 +676,23 @@ x_algor.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
 x_algor.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 x_algor.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
 x_algor.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-x_algor.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_algor.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_algor.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_algor.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_algor.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_algor.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_algor.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_algor.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_algor.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_algor.o: ../../include/openssl/x509_vfy.h x_algor.c
+x_algor.o: ../../include/openssl/e_os2.h ../../include/openssl/evp.h
+x_algor.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_algor.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_algor.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_algor.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_algor.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_algor.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_algor.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_algor.o: x_algor.c
 x_attrib.o: ../../e_os.h ../../include/openssl/asn1.h
 x_attrib.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_attrib.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_attrib.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_attrib.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_attrib.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_attrib.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_attrib.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_attrib.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_attrib.o: ../../include/openssl/opensslconf.h
+x_attrib.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_attrib.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_attrib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
 x_attrib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 x_attrib.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
 x_attrib.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
@@ -759,44 +713,41 @@ x_crl.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_crl.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_crl.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_crl.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_crl.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_crl.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_crl.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_crl.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_crl.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_crl.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_crl.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_crl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_crl.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_crl.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_crl.c
+x_crl.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_crl.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_crl.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_crl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_crl.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_crl.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_crl.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_crl.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_crl.o: ../cryptlib.h x_crl.c
 x_exten.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
 x_exten.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 x_exten.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
 x_exten.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-x_exten.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_exten.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_exten.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_exten.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_exten.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_exten.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_exten.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_exten.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_exten.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_exten.o: ../../include/openssl/x509_vfy.h x_exten.c
+x_exten.o: ../../include/openssl/e_os2.h ../../include/openssl/evp.h
+x_exten.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_exten.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_exten.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_exten.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_exten.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_exten.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_exten.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_exten.o: x_exten.c
 x_info.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 x_info.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_info.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_info.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_info.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_info.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_info.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_info.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_info.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_info.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_info.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_info.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_info.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_info.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_info.c
+x_info.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_info.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_info.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_info.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_info.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_info.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_info.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_info.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_info.o: ../cryptlib.h x_info.c
 x_long.o: ../../e_os.h ../../include/openssl/asn1.h
 x_long.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_long.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
@@ -811,41 +762,37 @@ x_name.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_name.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_name.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_name.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_name.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_name.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_name.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_name.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_name.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_name.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_name.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_name.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_name.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_name.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_name.c
+x_name.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_name.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_name.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_name.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_name.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_name.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_name.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_name.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_name.o: ../cryptlib.h x_name.c
 x_pkey.o: ../../e_os.h ../../include/openssl/asn1.h
 x_pkey.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
 x_pkey.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_pkey.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_pkey.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_pkey.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_pkey.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_pkey.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_pkey.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_pkey.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_pkey.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_pkey.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_pkey.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_pkey.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_pkey.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_pkey.c
+x_pkey.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_pkey.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_pkey.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_pkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_pkey.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_pkey.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_pkey.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_pkey.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_pkey.o: ../cryptlib.h x_pkey.c
 x_pubkey.o: ../../e_os.h ../../include/openssl/asn1.h
 x_pubkey.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_pubkey.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_pubkey.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_pubkey.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_pubkey.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_pubkey.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_pubkey.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_pubkey.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_pubkey.o: ../../include/openssl/opensslconf.h
+x_pubkey.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_pubkey.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_pubkey.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
 x_pubkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 x_pubkey.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
 x_pubkey.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
@@ -857,89 +804,83 @@ x_req.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_req.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_req.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_req.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_req.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_req.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_req.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_req.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_req.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_req.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_req.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_req.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_req.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_req.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_req.c
+x_req.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_req.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_req.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_req.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_req.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_req.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_req.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_req.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_req.o: ../cryptlib.h x_req.c
 x_sig.o: ../../e_os.h ../../include/openssl/asn1.h
 x_sig.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_sig.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_sig.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_sig.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_sig.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_sig.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_sig.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_sig.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_sig.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_sig.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_sig.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_sig.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_sig.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_sig.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_sig.c
+x_sig.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_sig.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_sig.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_sig.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_sig.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_sig.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_sig.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_sig.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_sig.o: ../cryptlib.h x_sig.c
 x_spki.o: ../../e_os.h ../../include/openssl/asn1.h
 x_spki.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_spki.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_spki.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_spki.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_spki.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_spki.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_spki.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_spki.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_spki.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_spki.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_spki.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_spki.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_spki.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_spki.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_spki.c
+x_spki.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_spki.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_spki.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_spki.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_spki.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_spki.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_spki.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_spki.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_spki.o: ../cryptlib.h x_spki.c
 x_val.o: ../../e_os.h ../../include/openssl/asn1.h
 x_val.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_val.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_val.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_val.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_val.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_val.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_val.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_val.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_val.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_val.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_val.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_val.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_val.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_val.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_val.c
+x_val.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_val.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_val.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_val.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_val.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_val.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_val.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_val.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_val.o: ../cryptlib.h x_val.c
 x_x509.o: ../../e_os.h ../../include/openssl/asn1.h
 x_x509.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_x509.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_x509.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
 x_x509.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-x_x509.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_x509.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_x509.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_x509.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_x509.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_x509.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_x509.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-x_x509.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-x_x509.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-x_x509.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-x_x509.o: ../../include/openssl/x509v3.h ../cryptlib.h x_x509.c
+x_x509.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+x_x509.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
+x_x509.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+x_x509.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+x_x509.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
+x_x509.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+x_x509.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+x_x509.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+x_x509.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
+x_x509.o: ../cryptlib.h x_x509.c
 x_x509a.o: ../../e_os.h ../../include/openssl/asn1.h
 x_x509a.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 x_x509a.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_x509a.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
 x_x509a.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_x509a.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_x509a.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_x509a.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_x509a.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_x509a.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_x509a.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_x509a.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_x509a.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_x509a.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_x509a.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_x509a.c
+x_x509a.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_x509a.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
+x_x509a.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+x_x509a.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+x_x509a.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
+x_x509a.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_x509a.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_x509a.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_x509a.o: ../cryptlib.h x_x509a.c

crypto/asn1/a_bitstr.c

@@ -120,12 +120,6 @@ ASN1_BIT_STRING *c2i_ASN1_BIT_STRING(ASN1_BIT_STRING **a, unsigned char **pp,
 	unsigned char *p,*s;
 	int i;
 
-	if (len < 1)
-		{
-		i=ASN1_R_STRING_TOO_SHORT;
-		goto err;
-		}
-
 	if ((a == NULL) || ((*a) == NULL))
 		{
 		if ((ret=M_ASN1_BIT_STRING_new()) == NULL) return(NULL);
@@ -191,9 +185,7 @@ int ASN1_BIT_STRING_set_bit(ASN1_BIT_STRING *a, int n, int value)
 		if (a->data == NULL)
 			c=(unsigned char *)OPENSSL_malloc(w+1);
 		else
-			c=(unsigned char *)OPENSSL_realloc_clean(a->data,
-								 a->length,
-								 w+1);
+			c=(unsigned char *)OPENSSL_realloc(a->data,w+1);
 		if (c == NULL) return(0);
 		if (w+1-a->length > 0) memset(c+a->length, 0, w+1-a->length);
 		a->data=c;

crypto/asn1/a_bytes.c

@@ -285,7 +285,7 @@ static int asn1_collate_primitive(ASN1_STRING *a, ASN1_CTX *c)
 			goto err;
 			}
 
-		if (!BUF_MEM_grow_clean(&b,num+os->length))
+		if (!BUF_MEM_grow(&b,num+os->length))
 			{
 			c->error=ERR_R_BUF_LIB;
 			goto err;