the RSA_METHOD's "init()" handler is called, and is cleaned up after the
RSA_METHOD's "finish()" handler is called. Custom RSA_METHODs may wish to
initialise contexts and other specifics in the RSA structure upon creation
and that was previously not possible - "ex_data" is where that stuff
should go and it was being initialised too late for it to be used.
These new files will not be included literally in OpenSSL, but I intend
to integrate most of their contents. Most file names will change,
and when the integration is done, the superfluous files will be deleted.
Submitted by: Lenka Fibikova <fibikova@exp-math.uni-essen.de>
I'm a little bit nervous about bn_div_words, as I don't know what it's
supposed to return on overflow. For now, I trust the rest of the
system to give it numbers that will not cause any overflow...
BN_mul() correctly constified, avoids two realloc()'s that aren't
really necessary and saves memory to boot. This required a small
change in bn_mul_part_recursive() and the addition of variants of
bn_cmp_words(), bn_add_words() and bn_sub_words() that can take arrays
with differing sizes.
The test results show a performance that very closely matches the
original code from before my constification. This may seem like a
very small win from a performance point of view, but if one remembers
that the variants of bn_cmp_words(), bn_add_words() and bn_sub_words()
are not at all optimized for the moment (and there's no corresponding
assembler code), and that their use may be just as non-optimal, I'm
pretty confident there are possibilities...
This code needs reviewing!
situation where they've initialised the ENGINE, loaded keys (which are then
linked to that ENGINE), and performed other checks (such as verifying
certificate chains etc). At that point, if the application goes
multi-threaded or multi-process it creates problems for any ENGINE
implementations that are either not thread/process safe or that perform
optimally when they do not have to perform locking and other contention
management tasks at "run-time".
This defines a new ENGINE_ctrl() command that can be supported by engines
at their discretion. If ENGINE_ctrl(..., ENGINE_CTRL_HUP,...) returns an
error then the caller should check if the *_R_COMMAND_NOT_IMPLEMENTED error
reason was set - it may just be that the engine doesn't support or need the
HUP command, or it could be that the attempted reinitialisation failed. A
crude alternative is to ignore the return value from ENGINE_ctrl() (and
clear any errors with ERR_clear_error()) and perform a test operation
immediately after the "HUP". Very crude indeed.
ENGINEs can support this command to close and reopen connections, files,
handles, or whatever as an alternative to run-time locking when such things
would otherwise be needed. In such a case, it's advisable for the engine
implementations to support locking by default but disable it after the
arrival of a HUP command, or any other indication by the application that
locking is not required. NB: This command exists to allow an ENGINE to
reinitialise without the ENGINE's functional reference count having to sink
down to zero and back up - which is what is normally required for the
finish() and init() handlers to get invoked. It would also be a bad idea
for engine_lib to catch this command itself and interpret it by calling the
engine's init() and finish() handlers directly, because reinitialisation
may need special handling on a case-by-case basis that is distinct from a
finish/init pair - eg. calling a finish() handler may invalidate the state
stored inside individual keys that have already loaded for this engine.
two functions that did expansion on in parameters (BN_mul() and
BN_sqr()). The problem was solved by making bn_dup_expand() which is
a mix of bn_expand2() and BN_dup().
load the "external" built-in engines (those that require DSO). This
makes linking with libdl or other dso libraries non-mandatory.
Change 'openssl engine' accordingly.
Change the engine header files so some declarations (that differed at
that!) aren't duplicated, and make sure engine_int.h includes
engine.h. That way, there should be no way of missing the needed
info.
automatically, however some code was still referring to the original
pointer rather than the internal one (and thus to NULL instead of the
created pointer).
translate library names by only adding ".so" to them without
prepending them with "lib". Add the flag DSO_FLAG_NAME_TRANSLATION_EXT_ONLY
for that purpose.
appropriate filename translation on the host system. Apart from this point,
users should also note that there's a slight change in the API functions
too. The DSO now contains its own to-be-converted filename
("dso->filename"), and at the time the DSO loads the "dso->loaded_filename"
value is set to the translated form. As such, this also provides an impicit
way of determining if the DSO is currently loaded or not. Except, perhaps,
VMS .... :-)
The various DSO_METHODs have been updated for this mechanism except VMS
which is deliberately broken for now, Richard is going to look at how to
fit it in (the source comments in there explain "the issue").
Basically, the new callback scheme allows the filename conversion to
(a) be turned off altogether through the use of the
DSO_FLAG_NO_NAME_TRANSLATION flag,
(b) be handled in the default way using the default DSO_METHOD's converter
(c) overriden per-DSO by setting the override callback
(d) a mix of (b) and (c) - eg. implement an override callback that;
(i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..."
and if so, convert "blah" into "blah32.dll" (the default is
otherwise to make it "blah.dll").
(ii) default to the normal behaviour - eg. we're not on win32, so
finish with (return dso->meth->dso_name_converter(dso,NULL)).
(e) be retried a number of times by writing a new DSO_METHOD where the
"dso_load()" handler will call the converter repeatedly. Then the
custom converter could use state information in the DSO to suggest
different conversions or paths each time it is invoked.
NCONF_get_number_e() is defined (_e for "error checking") and is
promoted strongly. The old NCONF_get_number is kept around for
binary backward compatibility.
Actually, it's a feature that it goes looking at environment
variables. It's just a pity that it's at the cost of the error
checking... I'll see if I can come up with a better interface for
this.
record-oriented fashion. That means that every write() will write a
separate record, which will be read separately by the programs trying
to read from it. This can be very confusing.
The solution is to put a BIO filter in the way that will buffer text
until a linefeed is reached, and then write everything a line at a
time, so every record written will be an actual line, not chunks of
lines and not (usually doesn't happen, but I've seen it once) several
lines in one record. Voila, BIO_f_linebuffer() is born.
Since we're so close to release time, I'm making this VMS-only for
now, just to make sure no code is needlessly broken by this. After
the release, this BIO method will be enabled on all other platforms as
well.
BN_mod_mul_montgomery, which calls bn_sqr_recursive
without much preparation.
bn_sqr_recursive requires the length of its argument to be
a power of 2, which is not always the case here.
There's no reason for not using BN_sqr -- if a simpler
approach to squaring made sense, then why not change
BN_sqr? (Using BN_sqr should also speed up DH where g is chosen
such that it becomes small [e.g., 2] when converted
to Montgomery representation.)
Case closed :-)
doesn't quite work on WinNT 4 earlier than SP6. It works fine on
Windows 98 and Windows 2000.
I'm disabling it for now. What's really needed is some kind of check
to see if GetCursorInfo is safe to call, or alternatively, GetCursor
or GetCursorPos could be used, according to Jeffrey.
- Make sure PCURSORINFO is defined even on systems that do not provide it.
- Change the reference to Peter Gutmann's paper.
- Make sure we don't walk the whole heap lists for performance reasons.
Jeffrey Altman suggests following Peter Gutmann's advice to keep it
to 50 heap entries per heap list.
handle an externally provided "static" buffer as well a a dynamic
buffer. The "static" buffer is filled first, but if overflowed, the
dynamic buffer is used instead, being allocated somewhere i the heap.
This combines the benefits of putting the output in a preallocated
buffer (on the stack, for example) and in a buffer that grows
somewhere in the heap.
add some whitespace for 'if ()', 'for ()', 'while ()' to distinguish
keywords from function names, and finally remove parens around return
values (why be stingy with whitespace but fill the source code
with an abundance of parentheses that are not needed to structure
expressions for readability?).
The old code was painfully primitive and couldn't handle
distinct certificates using the same subject name.
The new code performs several tests on a candidate issuer
certificate based on certificate extensions.
It also adds several callbacks to X509_VERIFY_CTX so its
behaviour can be customised.
Unfortunately some hackery was needed to persuade X509_STORE
to tolerate this. This should go away when X509_STORE is
replaced, sometime...
This must have broken something though :-(
If some other thread deletes the BIO that one thread needs for
BIO_write, then there's a lot of trouble anyway; there's
nothing special about calling the callback.
Returning -1 for an attempt to read from an empty buffer is empty is
not an error that should be signalled via the error queue, it's a
'retry read' condition and is signalled as such.
This allows intermediate CAs to be created more easily.
PKCS12_create() now checks private key matches certificate.
Fix typo in x509 app.
Update docs.
New function ASN1_STRING_to_UTF8() converts any ASN1_STRING
type to UTF8.
initialize ex_pathlen to -1 so it isn't checked if pathlen
is not present.
set ucert to NULL in apps/pkcs12.c otherwise it gets freed
twice.
remove extraneous '\r' in MIME encoder.
Allow a NULL to be passed to X509_gmtime_adj()
Make PKCS#7 code use definite length encoding rather then
the indefinite stuff it used previously.
records, EVP_EncodeUpdate() may misbehave. This happens when there's
a record boundary between the two ending b64 equal signs, which makes
EVP_EncodeUpdate think there has been more than one EOF, and therefore
add an extra NUL at the end of the output buffer. This fix corrects
that problem.
test was never triggered due to an off-by-one error.
In s23_clnt.c, don't use special rollback-attack detection padding
(RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
client; similarly, in s23_srvr.c, don't do the rollback check if
SSL 2.0 is the only protocol enabled in the server.
functions. These are intended to be replacements
for the ancient ASN1_STRING_print() and X509_NAME_print()
functions.
The new functions support RFC2253 and various pretty
printing options. It is also possible to display
international characters if the terminal properly handles
UTF8 encoding (Linux seems to tolerate this if the
"unicode_start" script is run).
Still needs to be documented, integrated into other
utilities and extensively tested.
size) through the base64 filter, b64_write() messes up it's parameters
in such a way that instead of writing correct base64 output, the first
4 characters of that output is repeated over and over. This fix
corrects that problem.
it wants to stir the pool using ssleay_rand_add. This fix provides the
possibility to call ssleay_rand_add inside a locked state by simply telling
it not to do any locking through a static variable. This isn't the most
elegant way one could do this, but it does retain thread safety during the
stirring process.
there's support for building under Linux and True64 (using examples
from the programming manuals), including versioning that is currently
the same as OpenSSL versions but should really be a different series.
With this change, it's up to the users to decide if they want shared
libraries as well as the static ones. This decision now has to be
done at configuration time (well, not really, those who know what they
do can still do it the same way as before).
The OpenSSL programs (openssl and the test programs) are currently
always linked statically, but this may change in the future in a
configurable manner. The necessary makefile variables to enable this
are in place.
Also note that I have done absolutely nothing about the Windows target
to get something similar. On the other hand, DLLs are already the
default there, but without versioning, and I've no idea what the
possibilities for such a thing are there...
call the i2c/c2i (they were not using the
content length for the headers).
Fix ASN1 long form tag encoding. This never
worked but it was never tested since it is
only used for tags > 30.
New options to smime program to allow the
PKCS#7 format to be specified and the content
supplied externally.
could be done automagically, much like the numbering in libeay.num and
ssleay.num. The solution works as follows:
- New object identifiers are inserted in objects.txt, following the
syntax given in objects.README.
- objects.pl is used to process obj_mac.num and create a new
obj_mac.h.
- obj_dat.pl is used to create a new obj_dat.h, using the data in
obj_mac.h.
This is currently kind of a hack, and the perl code in objects.pl
isn't very elegant, but it works as I intended. The simplest way to
check that it worked correctly is to look in obj_dat.h and check the
array nid_objs and make sure the objects haven't moved around (this is
important!). Additions are OK, as well as consistent name changes.
the 'INSTALL' file, which means that 9 times of 10, the BlowFish
headers won't get installed. Avoid this in the same way it's done in
crypto/des/Makefile.ssl, where someone apparently has thought of this...
into lexical order. Previously it depended on
the order of files in the directory.
This should now mean that all systems will
agree on the order of safestack.h and will
not change it needlessly and avoid massive
needless commits to safestack.h in future.
It wont however avoid this one :-(
it cope with OpenBSD which doesn't understand "RTLD_NOW".
* Added the dso_scheme config string entry for OpenBSD-x86 to give it
DSO support.
* 'make update' that has also absorbed some of Steve's mkstack changes
for the ASN-related macros.
This is mostly a work around for the old VC++ problem
that it treats func() as func(void).
Various prototypes had been added to 'compare' function
pointers that triggered this. This could be fixed by removing
the prototype, adding function pointer casts to every call or
changing the passed function to use the expected arguments.
I mostly did the latter.
The mkdef.pl script was modified to remove the typesafe
functions which no longer exist.
Oh and some functions called OPENSSL_freeLibrary() were
changed back to FreeLibrary(), wonder how that happened :-)
Also, make sure empty slots of the dynamic lock stack are used.
Actually, I'm not really sure this is the right thing to do, and may
remove it, with an endlessly growing stack as result...
insecure, so a static lock is added to isolate the sensitive parts.
Also, to avoid one thread freeing a lock that is used by another, a
reference counter is added.
be needed in some ENGINE code, and might serve elsewhere as well.
Note that it's implemented in such a way that the locking itself is
done through the same CRYPTO_lock function as the static locks.
WARNING: This is currently experimental and untested code (it will get
tested soon, though :-)).
sk_whatever_insert and sk_whatever_set immediately reveals the subtle
difference in parameter order.
Change mkstack.pl so that safestack.h is not rewritten when
nothing has changed.
After some messing around this seems to work but needs
a few more tests. Working out the syntax for sk_set_cmp_func()
(cast it to a function that itself returns a function pointer)
was painful :-(
Needs some testing to see what other compilers think of this
syntax.
Also needs similar stuff for ASN1_SET_OF etc etc.
