ssl3_setup_buffers or pqueue_insert fail. The former will fail if there is a
malloc failure, whilst the latter will fail if attempting to add a duplicate
record to the queue. This should never happen because duplicate records should
be detected and dropped before any attempt to add them to the queue.
Unfortunately records that arrive that are for the next epoch are not being
recorded correctly, and therefore replays are not being detected.
Additionally, these "should not happen" failures that can occur in
dtls1_buffer_record are not being treated as fatal and therefore an attacker
could exploit this by sending repeated replay records for the next epoch,
eventually causing a DoS through memory exhaustion.
Thanks to Chris Mueller for reporting this issue and providing initial
analysis and a patch. Further analysis and the final patch was performed by
Matt Caswell from the OpenSSL development team.
CVE-2015-0206
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
(cherry picked from commit 652ff0f4796eecd8729b4690f2076d1c7ccb2862)
Fix to prevent use of DH client certificates without sending
certificate verify message.
If we've used a client certificate to generate the premaster secret
ssl3_get_client_key_exchange returns 2 and ssl3_get_cert_verify is
never called.
We can only skip the certificate verify message in
ssl3_get_cert_verify if the client didn't send a certificate.
Thanks to Karthikeyan Bhargavan for reporting this issue.
CVE-2015-0205
Reviewed-by: Matt Caswell <matt@openssl.org>
of the crash due to p being NULL. Steve's fix prevents this situation from
occuring - however this is by no means obvious by looking at the code for
dtls1_get_record. This fix just makes things look a bit more sane.
Conflicts:
ssl/d1_pkt.c
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
OpenSSL clients would tolerate temporary RSA keys in non-export
ciphersuites. It also had an option SSL_OP_EPHEMERAL_RSA which
enabled this server side. Remove both options as they are a
protocol violation.
Thanks to Karthikeyan Bhargavan for reporting this issue.
(CVE-2015-0204)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 4b4c1fcc88aec8c9e001b0a0077d3cd4de1ed0e6)
Conflicts:
CHANGES
doc/ssl/SSL_CTX_set_options.pod
Fix bug where an OpenSSL client would accept a handshake using an
ephemeral ECDH ciphersuites with the server key exchange message omitted.
Thanks to Karthikeyan Bhargavan for reporting this issue.
CVE-2014-3572
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit b15f8769644b00ef7283521593360b7b2135cb63)
Conflicts:
CHANGES
By using non-DER or invalid encodings outside the signed portion of a
certificate the fingerprint can be changed without breaking the signature.
Although no details of the signed portion of the certificate can be changed
this can cause problems with some applications: e.g. those using the
certificate fingerprint for blacklists.
1. Reject signatures with non zero unused bits.
If the BIT STRING containing the signature has non zero unused bits reject
the signature. All current signature algorithms require zero unused bits.
2. Check certificate algorithm consistency.
Check the AlgorithmIdentifier inside TBS matches the one in the
certificate signature. NB: this will result in signature failure
errors for some broken certificates.
3. Check DSA/ECDSA signatures use DER.
Reencode DSA/ECDSA signatures and compare with the original received
signature. Return an error if there is a mismatch.
This will reject various cases including garbage after signature
(thanks to Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS
program for discovering this case) and use of BER or invalid ASN.1 INTEGERs
(negative or with leading zeroes).
CVE-2014-8275
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 684400ce192dac51df3d3e92b61830a6ef90be3e)
Conflicts:
CHANGES
crypto/dsa/dsa_asn1.c
According to X6.90 null, object identifier, boolean, integer and enumerated
types can only have primitive encodings: return an error if any of
these are received with a constructed encoding.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit f5e4b6b5b566320a8d774f9475540f7d0e6a704d)
Conflicts:
crypto/asn1/asn1_err.c
Causes more problems than it fixes: even though error codes
are not part of the stable API, several users rely on the
specific error code, and the change breaks them. Conversely,
we don't have any concrete use-cases for constant-time behaviour here.
This reverts commit b55ff319f880adc874b8c95957adf2003117d42b.
Reviewed-by: Andy Polyakov <appro@openssl.org>
From BoringSSL
- Send an alert when the client key exchange isn't correctly formatted.
- Reject overly short RSA ciphertexts to avoid a (benign) out-of-bounds memory access.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 4aecfd4d9f366c849c9627ab666d1b1addc024e6)
Based on commit 66f96fe2d519147097c118d4bf60704c69ed0635 by Steve Henson
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit ce5ddefc4394a0ae6c79efaffe08cf47ac659ea0)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit d04a1e0b5beb3329cdf8c4ec35b9113cbc41d2f2)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit bb1ddd3d9a0d01656b90693a214b911995a5fe8c)
and UDP header) when setting an mtu. This constant is not always correct (e.g.
if using IPv6). Use the new DTLS_CTRL functions instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 464ce92026bd0c79186cbefa75470f39607110be)
we will support then dtls1_do_write can go into an infinite loop. This commit
fixes that.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit d3d9eef31661633f5b003a9e115c1822f79d1870)
at least the minimum or it will fail.
There were some instances in dtls1_query_mtu where the final mtu can end up
being less than the minimum, i.e. where the user has set an mtu manually. This
shouldn't be allowed. Also remove dtls1_guess_mtu that, despite having
logic for guessing an mtu, was actually only ever used to work out the minimum
mtu to use.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 1620a2e49c777f31f2ce57966ae74006b48ad759)
and instead use the value provided by the underlying BIO. Also provide some
new DTLS_CTRLs so that the library user can set the mtu without needing to
know this constant. These new DTLS_CTRLs provide the capability to set the
link level mtu to be used (i.e. including this IP/UDP overhead). The previous
DTLS_CTRLs required the library user to subtract this overhead first.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 59669b6abf620d1ed2ef4d1e2df25c998b89b64d)
Conflicts:
ssl/d1_both.c
ssl/ssl.h
ssl/ssl_lib.c
used with no explanation. Some of this was introduced as part of RT#1929. The
value 28 is the length of the IP header (20 bytes) plus the UDP header (8
bytes). However use of this constant is incorrect because there may be
instances where a different value is needed, e.g. an IPv4 header is 20 bytes
but an IPv6 header is 40. Similarly you may not be using UDP (e.g. SCTP).
This commit introduces a new BIO_CTRL that provides the value to be used for
this mtu "overhead". It will be used by subsequent commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 0d3ae34df573f477b6b1aaf614d52dcdfcff5fce)
Conflicts:
crypto/bio/bio.h
crypto/bio/bss_dgram.c
mtu that we have received is not less than the minimum. If its less it uses the
minimum instead. The second call to query the mtu does not do that, but
instead uses whatever comes back. We have seen an instance in RT#3592 where we
have got an unreasonably small mtu come back. This commit makes both query
checks consistent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6abb0d1f8e702a0daa9c32b8021d01eda0483018)
automatically updated, and we should use the one provided instead.
Unfortunately there are a couple of locations where this is not respected.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 001235778a6e9c645dc0507cad6092d99c9af8f5)
RT#3592 provides an instance where the OPENSSL_assert that this commit
replaces can be hit. I was able to recreate this issue by forcing the
underlying BIO to misbehave and come back with very small mtu values. This
happens the second time around the while loop after we have detected that the
MTU has been exceeded following the call to dtls1_write_bytes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit cf75017bfd60333ff65edf9840001cd2c49870a3)
Previously, state variant was not advanced, which resulted in state
being stuck in the st1 variant (usually "_A").
This broke certificate callback retry logic when accepting connections
that were using SSLv2 ClientHello (hence reusing the message), because
their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required
for the retry code path.
Reported by Yichun Zhang (agentzh).
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The current documentation contains a bunch of spelling and grammar mistakes. I also
found it hard to understand some paragraphs, so here is my attempt to improve its
readability.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 03b637a730e4a298c360cc143de7564060c06324)
