Luca Boccassi
0bbd38f5d4
Problem: text_xpub_nodrop sometimes fails
...
Solution: use XPUB and wait for the subscription message rather than
using a sleep which might or might not be enough
2019-03-08 18:26:23 +00:00
Claudio Biagi
d41ed6180b
Proxy performance fix, ticket #3439
...
Improve performance of the proxy forwarding batch of message.
Add throughput benchmark for proxy.
Fix valgrind error reported on unitialized vars
RELICENSE: Add emtr grant
2019-03-08 15:02:58 +01:00
Simon Giesecke
73159a8fab
Problem: race condition in test_hwm
...
Solution: wait a bit to allow connect to succeed if inproc bind preceded connect
2019-03-01 18:20:37 -05:00
Simon Giesecke
14fd7505bc
Problem: race condition in test_xpub_nodrop
...
Solution: try to avoid race condition by increasing timeout from 0 to 250ms
2019-03-01 18:20:37 -05:00
Simon Giesecke
a95c4ab404
Problem: test_decrease_when_full is disabled for Windows
...
Solution: add sleep after connecting such that sending is not started before connection succeeded
2019-03-01 15:05:55 -05:00
Simon Giesecke
828ed69d63
Problem: test_decrease_when_full test case in test_sockopt_hwm does not run reliably under Windows
...
Solution: disable test case for the moment and mark it as FIXME
2019-03-01 05:51:45 -05:00
Simon Giesecke
21a389ca78
Problem: test_security_curve build fails with Windows targeting 8 or newer due to duplicate definition of htonll
...
Solution: use custom implementation only on older Windows versions
2019-02-12 03:47:26 -05:00
Luca Boccassi
feadf6d40f
Problem: cannot monitor state of queues at runtime
...
Solution: add API and ZMQ_EVENT_PIPES_STATS event which generates 2
values, one for the egress and one for the ingress pipes respectively.
Refactor the events code to be able to send multiple values.
2019-02-10 16:33:26 +00:00
Luca Boccassi
cb73745250
Problem: cannot send more than one value per v2 event
...
Solution: refactor code and add extra frame with value count before the
values in v2
2019-02-07 20:42:47 +00:00
Luca Boccassi
1e26a93ce2
Problem: test_monitor fails in valgrind
...
Solution: expect additional events
2019-02-07 20:42:47 +00:00
Luca Boccassi
83946d5c98
Problem: testutil_monitoring does not close received messages
...
Solution: do it, as above 32 bytes they might be on the heap
2019-02-07 16:24:41 +00:00
Luca Boccassi
edf79dfefc
Problem: test_monitor check for DRAFT has to be kept up to date
...
Solution: check for the available version instead
2019-02-07 16:24:41 +00:00
Luca Boccassi
e5a7f2eb56
Merge pull request #3402 from sigiesec/revert-64-bit-assertions
...
Revert 64 bit assertions
2019-02-07 15:58:38 +00:00
Simon Giesecke
31ff05d156
Revert "Problem: test build fails on 32 bit systems"
...
This reverts commit ac19d5f41c
2019-02-07 10:42:32 -05:00
Simon Giesecke
4273ffd266
Partially revert "Problem: monitor events are output as decimal in assertion messages"
...
This partially reverts commit 19c6aa5c92
2019-02-07 10:42:32 -05:00
Simon Giesecke
ec4ecb01ff
Problem: no test for ZMQ_BINDTODEVICE
...
Solution: add test case run with cap_net_admin
Fixes #3397
2019-02-07 09:39:02 -05:00
Simon Giesecke
ac19d5f41c
Problem: test build fails on 32 bit systems
...
Solution: define UNITY_SUPPORT_64 to force 64 bit support
2019-02-07 12:13:11 +01:00
Simon Giesecke
db8c26fce3
Problem: testutil_unity uses undefined names on Windows
...
Solution: make compilation conditional
2019-02-07 11:04:05 +01:00
Simon Giesecke
8de7e529ec
Problem: no test case for tcp name resolution no longer working
...
Solution: add test case
2019-02-07 11:04:05 +01:00
Simon Giesecke
61e476ec89
Problem: MAX_SOCKET_STRING is too short for ipc wildcard binds
...
Solution: increase size to 256
2019-02-06 09:09:14 -05:00
Simon Giesecke
19c6aa5c92
Problem: monitor events are output as decimal in assertion messages
...
Solution: output as hex instead
2019-02-06 07:11:10 -05:00
Simon Giesecke
a86592f78c
Problem: test_monitor is not run for ipc and tipc
...
Solution: add test cases
2019-02-06 07:11:10 -05:00
Simon Giesecke
8d784f26ab
Problem: close always fails with wildcard bind, since directory is not empty
...
Solution: unlink the socket file first
2019-02-05 10:17:28 -05:00
Luca Boccassi
a9a5b2bde5
Problem: DRAFT build broken on old Windows
...
Solution: define uint64_t if not available in the system headers and
remove inclusion of inttypes.h which does not exist and is already
conditionally included in zmq.h if required, do not use PRIx64
2019-02-03 22:11:52 +01:00
Luca Boccassi
84847138a1
Problem: test_monitor fails with ipv6
...
Solution: correctly set the ipv6 flag in the connecting socket
2019-02-03 20:56:07 +01:00
Simon Giesecke
0e2e303b10
Problem: test_monitor is not run for ipv6
...
Solution: add test case using ipv6
2019-02-02 19:00:33 +01:00
Simon Giesecke
f3561f7759
Problem: no assertions for endpoint addresses on ZMQ_EVENT_MONITOR_STOPPED and ZMQ_EVENT_LISTENING events
...
Solution: added assertions
2019-02-02 18:29:33 +01:00
Simon Giesecke
5e2da02528
Problem: test case is leaking test socket
...
Solution: close test socket
2019-02-02 17:15:27 +01:00
Simon Giesecke
8f90f579f5
Problem: no assertions for local and remote addresses in monitor tests
...
Solution: added such assertions and extended test utilities
2019-02-02 16:34:19 +01:00
Simon Giesecke
f884fa725c
Problem: get_monitor_event_internal segfaults when using address
...
Solution: dereference the pointer to the array before accessing the
element
2019-02-02 15:36:26 +01:00
Simon Giesecke
b18d28eec1
Problem: no tests for v2 monitor events and test_socket_monitor_versioned
...
Solution: add first test case
2019-02-02 15:33:27 +01:00
Simon Giesecke
30e0cbbcdc
Problem: test_monitor depends on testutil_security
...
Solution: move general monitoring test utilities to new testutil_monitoring
2019-02-02 15:33:27 +01:00
Simon Giesecke
367246bb23
Problem: test_monitor is not using a test framework
...
Solution: migrate to unity
2019-02-02 15:33:27 +01:00
Simon Giesecke
ae79b41d4c
Problem: bug in tipc_listener_t::set_address, random port is determined but not used
...
Solution: assign result to address
Fixes #3376
2019-02-01 04:30:20 -05:00
Luca Boccassi
93b3689376
Problem: ZMQ_SOCKET_LIMIT and ZMQ_THREAD_PRIORITY have the same value
...
Solution: remove documents and tests for ZMQ_THREAD_PRIORITY getter. It
never worked and can never work as it has the same value as a get-only
option ZMQ_SOCKET_LIMIT. It cannot be changed without breaking ABI.
Note that the setter works fine as ZMQ_SOCKET_LIMIT is get-only.
2019-01-15 19:58:42 +00:00
Luca Boccassi
4d38552445
Problem: GCC warnings about string overflows in tests
...
Solution: mostly false positives, but fix them
2019-01-14 23:50:56 +00:00
Luca Boccassi
d55956574d
Problem: test_rebind_ipc still fails
...
Solution: create manually the random IPC file to reuse
2019-01-14 00:33:36 +00:00
Luca Boccassi
f64b697095
Problem: tests use hard-coded fixed IPC file path
...
Solution: use wildcards or random directories to avoid races when
multiple users are running the same test on the same machine
2019-01-13 14:50:54 +00:00
Luca Boccassi
4147957a5e
Problem: test_security_zap fails on architectures that disallow unaligned pointer access
...
Solution: use memcpy instead of doing pointer arithmetics with casting
and dereferencing to fix the error on sparc64
2019-01-13 13:10:05 +00:00
Luca Boccassi
9bd9cbbeea
Problem: race condition in PUSH might break atomicity
...
Solution: if a multi-part message cannot be delivered by a PUSH socket
because the pipe is broken mid-way, drop the rest of the frames so that
the atomicity property is not broken.
2018-12-28 17:55:19 +01:00
Simon Giesecke
88bea4fd73
Problem: tests without test framework
...
Solution: migrate to unity
2018-12-25 13:50:31 +01:00
Simon Giesecke
affe77280c
Improved test assertion message
2018-12-16 12:28:42 -05:00
Simon Giesecke
00f4bd05be
Problem: tests without test framework
...
Solution: migrate to unity
2018-12-16 12:28:42 -05:00
Simon Giesecke
4a48184032
Problem: tests without test framework
...
Solution: migrate to unity
2018-12-10 07:01:06 -05:00
Simon Giesecke
a8b2e5a617
Problem: tests without test framework
...
Solution: migrate to unity
2018-12-09 07:36:39 -05:00
Luca Boccassi
f1dd84c11f
Problem: zmq_proxy STATISTICS eligible for stable
...
Solution: do it
2018-11-18 13:23:38 +00:00
Luca Boccassi
35c6985e68
Problem: zmq_stopwatch_intermediate is eligible for STABLE
...
Solution: do it
2018-11-18 13:23:38 +00:00
Luca Boccassi
22c3ecc458
Problem: some context options have no getter
...
Solution: add one so that class-based bindings can easily use them
2018-11-18 13:23:38 +00:00
Luca Boccassi
c347aef794
Problem: new DRAFT monitoring events are eligible for STABLE
...
Solution: do it
2018-11-18 13:23:38 +00:00
Luca Boccassi
0e01c27de5
Problem: test_router_notify cannot be ran in parallel
...
Solution: do not bind to an hard-coded port, use a wildcard.
2018-11-09 16:56:00 +00:00
