Merge pull request #655 from cdunn2001/fix-649

Fixes #649
Fixes #654

.gitignore

@@ -1,4 +1,5 @@
 /build/
+/build-*/
 *.pyc
 *.swp
 *.actual
@@ -6,7 +7,6 @@
 *.process-output
 *.rewrite
 /bin/
-/buildscons/
 /libs/
 /doc/doxyfile
 /dist/
@@ -31,7 +31,7 @@
 # CMake-generated files:
 CMakeFiles/
 *.cmake
-pkg-config/jsoncpp.pc
+/pkg-config/jsoncpp.pc
 jsoncpp_lib_static.dir/
 
 # In case someone runs cmake in the root-dir:
@@ -50,3 +50,6 @@ jsoncpp_lib_static.dir/
 .project
 .cproject
 /.settings/
+
+# DS_Store
+.DS_Store

CMakeLists.txt

@@ -59,12 +59,12 @@ ENDMACRO()
 #SET( JSONCPP_VERSION_MAJOR X )
 #SET( JSONCPP_VERSION_MINOR Y )
 #SET( JSONCPP_VERSION_PATCH Z )
-SET( JSONCPP_VERSION 1.8.1 )
+SET( JSONCPP_VERSION 1.8.3 )
 jsoncpp_parse_version( ${JSONCPP_VERSION} JSONCPP_VERSION )
 #IF(NOT JSONCPP_VERSION_FOUND)
 #    MESSAGE(FATAL_ERROR "Failed to parse version string properly. Expect X.Y.Z")
 #ENDIF(NOT JSONCPP_VERSION_FOUND)
-SET( JSONCPP_SOVERSION 11 )
+SET( JSONCPP_SOVERSION 19 )
 SET( JSONCPP_USE_SECURE_MEMORY "0" CACHE STRING "-D...=1 to use memory-wiping allocator for STL" )
 
 MESSAGE(STATUS "JsonCpp Version: ${JSONCPP_VERSION_MAJOR}.${JSONCPP_VERSION_MINOR}.${JSONCPP_VERSION_PATCH}")

LICENSE

@@ -2,13 +2,13 @@ The JsonCpp library's source code, including accompanying documentation,
 tests and demonstration applications, are licensed under the following
 conditions...
 
-The JsonCpp Authors explicitly disclaim copyright in all 
+Baptiste Lepilleur and The JsonCpp Authors explicitly disclaim copyright in all 
 jurisdictions which recognize such a disclaimer. In such jurisdictions, 
 this software is released into the Public Domain.
 
 In jurisdictions which do not recognize Public Domain property (e.g. Germany as of
-2010), this software is Copyright (c) 2007-2010 by The JsonCpp Authors, and is
-released under the terms of the MIT License (see below).
+2010), this software is Copyright (c) 2007-2010 by Baptiste Lepilleur and
+The JsonCpp Authors, and is released under the terms of the MIT License (see below).
 
 In jurisdictions which recognize Public Domain property, the user of this 
 software may choose to accept it either as 1) Public Domain, 2) under the 
@@ -23,7 +23,7 @@ described in clear, concise terms at:
 The full text of the MIT License follows:
 
 ========================================================================
-Copyright (c) 2007-2010 The JsonCpp Authors
+Copyright (c) 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 
 Permission is hereby granted, free of charge, to any person
 obtaining a copy of this software and associated documentation

NEWS.txt

@@ -1,175 +0,0 @@
-New in SVN
-----------
-
- *  Updated the type system's behavior, in order to better support backwards
-    compatibility with code that was written before 64-bit integer support was
-    introduced. Here's how it works now:
-
-     *  isInt, isInt64, isUInt, and isUInt64 return true if and only if the
-        value can be exactly represented as that type. In particular, a value
-        constructed with a double like 17.0 will now return true for all of
-        these methods.
-
-     *  isDouble and isFloat now return true for all numeric values, since all
-        numeric values can be converted to a double or float without
-        truncation. Note however that the conversion may not be exact -- for
-        example, doubles cannot exactly represent all integers above 2^53 + 1.
-
-     *  isBool, isNull, isString, isArray, and isObject now return true if and
-        only if the value is of that type.
-
-     *  isConvertibleTo(fooValue) indicates that it is safe to call asFoo.
-        (For each type foo, isFoo always implies isConvertibleTo(fooValue).)
-        asFoo returns an approximate or exact representation as appropriate.
-        For example, a double value may be truncated when asInt is called.
-
-     *  For backwards compatibility with old code, isConvertibleTo(intValue)
-        may return false even if type() == intValue. This is because the value
-        may have been constructed with a 64-bit integer larger than maxInt,
-        and calling asInt() would cause an exception. If you're writing new
-        code, use isInt64 to find out whether the value is exactly
-        representable using an Int64, or asDouble() combined with minInt64 and
-        maxInt64 to figure out whether it is approximately representable.
-
-* Value
-  - Patch #10: BOOST_FOREACH compatibility. Made Json::iterator more 
-    standard compliant, added missing iterator_category and value_type 
-	typedefs (contribued by Robert A. Iannucci).
-		
-* Compilation
-
-  - New CMake based build system. Based in part on contribution from
-    Igor Okulist and Damien Buhl (Patch #14).
-    
-  - New header json/version.h now contains version number macros
-    (JSONCPP_VERSION_MAJOR, JSONCPP_VERSION_MINOR, JSONCPP_VERSION_PATCH
-    and JSONCPP_VERSION_HEXA).
-
-  - Patch #11: added missing JSON_API on some classes causing link issues
-    when building as a dynamic library on Windows 
-	(contributed by Francis Bolduc).
-    
-  - Visual Studio DLL: suppressed warning "C4251: <data member>: <type> 
-    needs to have dll-interface to be used by..." via pragma push/pop
-    in json-cpp headers.
-    
-  - Added Travis CI intregration: https://travis-ci.org/blep/jsoncpp-mirror
-		
-* Bug fixes
-  - Patch #15: Copy constructor does not initialize allocated_ for stringValue
-    (contributed by rmongia).
-
-  - Patch #16: Missing field copy in Json::Value::iterator causing infinite 
-    loop when using experimental internal map (#define JSON_VALUE_USE_INTERNAL_MAP)
-	(contributed by Ming-Lin Kao).
-		
-
-  New in JsonCpp 0.6.0:
-  ---------------------
-
-* Compilation
-
-  - LD_LIBRARY_PATH and LIBRARY_PATH environment variables are now 
-    propagated to the build environment as this is required for some 
-    compiler installation.
-
-  - Added support for Microsoft Visual Studio 2008 (bug #2930462): 
-    The platform "msvc90" has been added.
-
-    Notes: you need to setup the environment by running vcvars32.bat 
-    (e.g. MSVC 2008 command prompt in start menu) before running scons.
-    
-  - Added support for amalgamated source and header generation (a la sqlite).
-    Refer to README.md section "Generating amalgamated source and header"
-    for detail.
-    
-* Value
-
-  - Removed experimental ValueAllocator, it caused static 
-    initialization/destruction order issues (bug #2934500). 
-    The DefaultValueAllocator has been inlined in code.
-    
-  - Added support for 64 bits integer:
-  
-    Types Json::Int64 and Json::UInt64 have been added. They are aliased
-	to 64 bits integers on system that support them (based on __int64 on 
-	Microsoft Visual Studio platform, and long long on other platforms).
-	
-	Types Json::LargestInt and Json::LargestUInt have been added. They are
-	aliased to the largest integer type supported: 
-	either Json::Int/Json::UInt or Json::Int64/Json::UInt64 respectively.
-	
-	Json::Value::asInt() and Json::Value::asUInt() still returns plain
-	"int" based types, but asserts if an attempt is made to retrieve
-	a 64 bits value that can not represented as the return type.
-	
-	Json::Value::asInt64() and Json::Value::asUInt64() have been added
-	to obtain the 64 bits integer value.
-	
-	Json::Value::asLargestInt() and Json::Value::asLargestUInt() returns
-	the integer as a LargestInt/LargestUInt respectively. Those functions
-	functions are typically used when implementing writer.
-	
-	The reader attempts to read number as 64 bits integer, and fall back
-	to reading a double if the number is not in the range of 64 bits 
-	integer.
-    
-    Warning: Json::Value::asInt() and Json::Value::asUInt() now returns
-    long long. This changes break code that was passing the return value
-    to *printf() function.
-  
-    Support for 64 bits integer can be disabled by defining the macro 
-	JSON_NO_INT64 (uncomment it in json/config.h for example), though
-	it should have no impact on existing usage.
-    
-  - The type Json::ArrayIndex is used for indexes of a JSON value array. It
-    is an unsigned int (typically 32 bits).
-	
-  - Array index can be passed as int to operator[], allowing use of literal:
-    Json::Value array;
-	array.append( 1234 );
-	int value = array[0].asInt();  // did not compile previously
-
-  - Added float Json::Value::asFloat() to obtain a floating point value as a
-    float (avoid lost of precision warning caused by used of asDouble() 
-    to initialize a float).
-
-* Reader
-
-  - Renamed Reader::getFormatedErrorMessages() to getFormattedErrorMessages.
-    Bug #3023708 (Formatted has 2 't'). The old member function is deprecated
-    but still present for backward compatibility.
-    
-* Tests
-
-  - Added test to ensure that the escape sequence "\/" is corrected handled 
-    by the parser.
-
-* Bug fixes
-
-  - Bug #3139677: JSON [1 2 3] was incorrectly parsed as [1, 3]. Error is now 
-    correctly detected.
-    
-  - Bug #3139678: stack buffer overflow when parsing a double with a
-    length of 32 characters.
-	
-  - Fixed Value::operator <= implementation (had the semantic of operator >=).
-    Found when adding unit tests for comparison operators.
-    
-  - Value::compare() is now const and has an actual implementation with
-    unit tests.
-
-  - Bug #2407932: strpbrk() can fail for NULL pointer.
-
-  - Bug #3306345: Fixed minor typo in Path::resolve().
-
-  - Bug #3314841/#3306896: errors in amalgamate.py
-
-  - Fixed some Coverity warnings and line-endings.
-    
-* License
-  
-  - See file LICENSE for details. Basically JsonCpp is now licensed under 
-    MIT license, or public domain if desired and recognized in your jurisdiction.
-    Thanks to Stephan G. Beal [http://wanderinghorse.net/home/stephan/]) who
-	helped figuring out the solution to the public domain issue.

README.md

@@ -28,160 +28,25 @@ format to store user input files.
 * `0.y.z` can be used with older compilers.
 * Major versions maintain binary-compatibility.
 
-
-## Using JsonCpp in your project
-
-The recommended approach to integrating JsonCpp in your project is to include
-the [amalgamated source](#generating-amalgamated-source-and-header) (a single
-`.cpp` file and two `.h` files) in your project, and compile and build as you
-would any other source file. This ensures consistency of compilation flags and
-ABI compatibility, issues which arise when building shared or static
-libraries. See the next section for instructions.
-
-The `include/` should be added to your compiler include path. JsonCpp headers
-should be included as follow:
-
-    #include <json/json.h>
-
-If JsonCpp was built as a dynamic library on Windows, then your project needs to define the macro `JSON_DLL`.
-
-### Generating amalgamated source and header
-
-JsonCpp is provided with a script to generate a single header and a single
-source file to ease inclusion into an existing project. The amalgamated source
-can be generated at any time by running the following command from the
-top-directory (this requires Python 2.6):
-
-    python amalgamate.py
-
-It is possible to specify header name. See the `-h` option for detail.
-
-By default, the following files are generated:
-
-* `dist/jsoncpp.cpp`: source file that needs to be added to your project.
-* `dist/json/json.h`: corresponding header file for use in your project. It is
-  equivalent to including `json/json.h` in non-amalgamated source. This header
-  only depends on standard headers.
-* `dist/json/json-forwards.h`: header that provides forward declaration of all
-  JsonCpp types.
-
-The amalgamated sources are generated by concatenating JsonCpp source in the
-correct order and defining the macro `JSON_IS_AMALGAMATION` to prevent inclusion of other headers.
-
-
 ## Contributing to JsonCpp
 
-### Building and testing with Conan
+### Building and testing with Meson/Ninja
+Thanks to David Seifert (@SoapGentoo), we (the maintainers) now use [meson](http://mesonbuild.com/) and [ninja](https://ninja-build.org/) to build for debugging, as well as for continuous integration (see [`travis.sh`](travis.sh) ). Other systems may work, but minor things like version strings might break.
 
-[Conan](https://www.conan.io/#/) is an open source package manager intended for C/C++ projects.
-It is cross platform and build system agnostic.
+First, install both meson (which requires Python3) and ninja.
 
-Conan requires Python for running, and can be installed using pip:
+Then,
 
-    pip install conan
+    cd jsoncpp/
+    BUILD_TYPE=shared
+    #BUILD_TYPE=static
+    LIB_TYPE=debug
+    #LIB_TYPE=release
+    meson --buildtype ${BUILD_TYPE} --default-library ${LIB_TYPE} . build-${LIB_TYPE}
+    ninja -v -C build-${LIB_TYPE} test
 
- Detailed instructions can be found on [conan docs](http://docs.conan.io/en/latest/).
-
-For build jsoncpp with conan, you need to create a [conanfile.txt](http://docs.conan.io/en/latest/reference/conanfile_txt.html) or a [conanfile.py](http://docs.conan.io/en/latest/reference/conanfile.html). The first is simpler, but the second is more flexible.
-
-This is a sample conanfile.txt:
-
-```
-[requires]
-jsoncpp/1.8.0@theirix/ci
-
-[generators]
-cmake
-```
-
-**Note**: cmake is not required, you can use other [integrations](http://docs.conan.io/en/latest/integrations.html). Or you can set the appropriate environment variables, using [virtualenv generators](http://docs.conan.io/en/latest/mastering/virtualenv.html).
-
-Then run the following command from the conanfile directory:
-
-    conan install --build missing
-
-This will try to download the appropriate package for your settings (OS, compiler, architecture) from the [recipe packages](https://www.conan.io/source/jsoncpp/1.8.0/theirix/ci). If it is not found, the package will be built.
-
-**Note**: you do not need to install cmake to build jsoncpp using conan, because the recipe will download it automatically.
-
-If you need, you can customize the jsoncpp recipe. Just clone/fork [it from github](https://github.com/theirix/conan-jsoncpp/).
-
-See [integrations instructions](http://docs.conan.io/en/latest/integrations.html) for how to use your build system with conan.
-
-### Building and testing with CMake
-
-[CMake][] is a C++ Makefiles/Solution generator. It is usually available on most Linux system as package. On Ubuntu:
-
-    sudo apt-get install cmake
-
-[CMake]: http://www.cmake.org
-
-Note that Python is also required to run the JSON reader/writer tests. If
-missing, the build will skip running those tests.
-
-When running CMake, a few parameters are required:
-
-* A build directory where the makefiles/solution are generated. It is also used
-  to store objects, libraries and executables files.
-* The generator to use: makefiles or Visual Studio solution? What version or
-  Visual Studio, 32 or 64 bits solution?
-
-Steps for generating solution/makefiles using `cmake-gui`:
-
-* Make "source code" point to the source directory.
-* Make "where to build the binary" point to the directory to use for the build.
-* Click on the "Grouped" check box.
-* Review JsonCpp build options (tick `BUILD_SHARED_LIBS` to build as a
-  dynamic library).
-* Click the configure button at the bottom, then the generate button.
-* The generated solution/makefiles can be found in the binary directory.
-
-Alternatively, from the command-line on Unix in the source directory:
-
-    mkdir -p build/debug
-    cd build/debug
-    cmake -DCMAKE_BUILD_TYPE=debug -DBUILD_STATIC_LIBS=ON -DBUILD_SHARED_LIBS=OFF -DARCHIVE_INSTALL_DIR=. -G "Unix Makefiles" ../..
-    make
-
-For a good pkg-config file, add:
-
-    -DCMAKE_INSTALL_INCLUDEDIR=include/jsoncpp
-
-Running `cmake -h` will display the list of available generators (passed using
-the `-G` option).
-
-By default CMake hides compilation commands. This can be modified by specifying
-`-DCMAKE_VERBOSE_MAKEFILE=true` when generating makefiles.
-
-### Building and testing with SCons
-
-**Note:** The SCons-based build system is deprecated. Please use CMake (see the
-section above).
-
-JsonCpp can use [Scons][] as a build system. Note that SCons requires Python to
-be installed.
-
-[SCons]: http://www.scons.org/
-
-Invoke SCons as follows:
-
-    scons platform=$PLATFORM [TARGET]
-
-where `$PLATFORM` may be one of:
-
-* `suncc`: Sun C++ (Solaris)
-* `vacpp`: Visual Age C++ (AIX)
-* `mingw`
-* `msvc6`: Microsoft Visual Studio 6 service pack 5-6
-* `msvc70`: Microsoft Visual Studio 2002
-* `msvc71`: Microsoft Visual Studio 2003
-* `msvc80`: Microsoft Visual Studio 2005
-* `msvc90`: Microsoft Visual Studio 2008
-* `linux-gcc`: Gnu C++ (linux, also reported to work for Mac OS X)
-
-If you are building with Microsoft Visual Studio 2008, you need to set up the
-environment by running `vcvars32.bat` (e.g. MSVC 2008 command prompt) before
-running SCons.
+### Building and testing with other build systems
+See https://github.com/open-source-parsers/jsoncpp/wiki/Building
 
 ### Running the tests manually
 
@@ -207,12 +72,6 @@ In the instructions below, replace `path/to/jsontest` with the path of the
     # You can run the tests using valgrind:
     python rununittests.py --valgrind path/to/test_lib_json
 
-### Running the tests using SCons
-
-Note that tests can be run using SCons using the `check` target:
-
-    scons platform=$PLATFORM check
-
 ### Building the documentation
 
 Run the Python script `doxybuild.py` from the top directory:
@@ -258,6 +117,14 @@ When a test is run, output files are generated beside the input test files. Belo
 * `test_complex_01.process-output`: `jsontest` output, typically useful for
   understanding parsing errors.
 
+## Using JsonCpp in your project
+
+### Amalgamated source
+https://github.com/open-source-parsers/jsoncpp/wiki/Amalgamated
+
+### Other ways
+If you have trouble, see the Wiki, or post a question as an Issue.
+
 ## License
 
 See the `LICENSE` file for details. In summary, JsonCpp is licensed under the

SConstruct

@@ -1,248 +0,0 @@
-"""
-Notes: 
-- shared library support is buggy: it assumes that a static and dynamic library can be build from the same object files. This is not true on many platforms. For this reason it is only enabled on linux-gcc at the current time.
-
-To add a platform:
-- add its name in options allowed_values below
-- add tool initialization for this platform. Search for "if platform == 'suncc'" as an example.
-"""
-
-import os
-import os.path
-import sys
-
-JSONCPP_VERSION = open(File('#version').abspath,'rt').read().strip()
-DIST_DIR = '#dist'
-
-options = Variables()
-options.Add( EnumVariable('platform',
-                        'Platform (compiler/stl) used to build the project',
-                        'msvc71',
-                        allowed_values='suncc vacpp mingw msvc6 msvc7 msvc71 msvc80 msvc90 linux-gcc'.split(),
-                        ignorecase=2) )
-
-try:
-    platform = ARGUMENTS['platform']
-    if platform == 'linux-gcc':
-        CXX = 'g++' # not quite right, but env is not yet available.
-        import commands
-        version = commands.getoutput('%s -dumpversion' %CXX)
-        platform = 'linux-gcc-%s' %version
-        print "Using platform '%s'" %platform
-        LD_LIBRARY_PATH = os.environ.get('LD_LIBRARY_PATH', '')
-        LD_LIBRARY_PATH = "%s:libs/%s" %(LD_LIBRARY_PATH, platform)
-        os.environ['LD_LIBRARY_PATH'] = LD_LIBRARY_PATH
-        print "LD_LIBRARY_PATH =", LD_LIBRARY_PATH
-except KeyError:
-    print 'You must specify a "platform"'
-    sys.exit(2)
-
-print "Building using PLATFORM =", platform
-
-rootbuild_dir = Dir('#buildscons')
-build_dir = os.path.join( '#buildscons', platform )
-bin_dir = os.path.join( '#bin', platform )
-lib_dir = os.path.join( '#libs', platform )
-sconsign_dir_path = Dir(build_dir).abspath
-sconsign_path = os.path.join( sconsign_dir_path, '.sconsign.dbm' )
-
-# Ensure build directory exist (SConsignFile fail otherwise!)
-if not os.path.exists( sconsign_dir_path ):
-    os.makedirs( sconsign_dir_path )
-
-# Store all dependencies signature in a database
-SConsignFile( sconsign_path )
-
-def make_environ_vars():
-	"""Returns a dictionnary with environment variable to use when compiling."""
-	# PATH is required to find the compiler
-	# TEMP is required for at least mingw
-    # LD_LIBRARY_PATH & co is required on some system for the compiler
-	vars = {}
-	for name in ('PATH', 'TEMP', 'TMP', 'LD_LIBRARY_PATH', 'LIBRARY_PATH'):
-		if name in os.environ:
-			vars[name] = os.environ[name]
-	return vars
-	
-
-env = Environment( ENV = make_environ_vars(),
-                   toolpath = ['scons-tools'],
-                   tools=[] ) #, tools=['default'] )
-
-if platform == 'suncc':
-    env.Tool( 'sunc++' )
-    env.Tool( 'sunlink' )
-    env.Tool( 'sunar' )
-    env.Append( CCFLAGS = ['-mt'] )
-elif platform == 'vacpp':
-    env.Tool( 'default' )
-    env.Tool( 'aixcc' )
-    env['CXX'] = 'xlC_r'   #scons does not pick-up the correct one !
-    # using xlC_r ensure multi-threading is enabled:
-    # http://publib.boulder.ibm.com/infocenter/pseries/index.jsp?topic=/com.ibm.vacpp7a.doc/compiler/ref/cuselect.htm
-    env.Append( CCFLAGS = '-qrtti=all',
-                LINKFLAGS='-bh:5' )  # -bh:5 remove duplicate symbol warning
-elif platform == 'msvc6':
-    env['MSVS_VERSION']='6.0'
-    for tool in ['msvc', 'msvs', 'mslink', 'masm', 'mslib']:
-        env.Tool( tool )
-    env['CXXFLAGS']='-GR -GX /nologo /MT'
-elif platform == 'msvc70':
-    env['MSVS_VERSION']='7.0'
-    for tool in ['msvc', 'msvs', 'mslink', 'masm', 'mslib']:
-        env.Tool( tool )
-    env['CXXFLAGS']='-GR -GX /nologo /MT'
-elif platform == 'msvc71':
-    env['MSVS_VERSION']='7.1'
-    for tool in ['msvc', 'msvs', 'mslink', 'masm', 'mslib']:
-        env.Tool( tool )
-    env['CXXFLAGS']='-GR -GX /nologo /MT'
-elif platform == 'msvc80':
-    env['MSVS_VERSION']='8.0'
-    for tool in ['msvc', 'msvs', 'mslink', 'masm', 'mslib']:
-        env.Tool( tool )
-    env['CXXFLAGS']='-GR -EHsc /nologo /MT'
-elif platform == 'msvc90':
-    env['MSVS_VERSION']='9.0'
-    # Scons 1.2 fails to detect the correct location of the platform SDK.
-    # So we propagate those from the environment. This requires that the
-    # user run vcvars32.bat before compiling.
-    if 'INCLUDE' in os.environ:
-        env['ENV']['INCLUDE'] = os.environ['INCLUDE']
-    if 'LIB' in os.environ:
-        env['ENV']['LIB'] = os.environ['LIB']
-    for tool in ['msvc', 'msvs', 'mslink', 'masm', 'mslib']:
-        env.Tool( tool )
-    env['CXXFLAGS']='-GR -EHsc /nologo /MT'
-elif platform == 'mingw':
-    env.Tool( 'mingw' )
-    env.Append( CPPDEFINES=[ "WIN32", "NDEBUG", "_MT" ] )
-elif platform.startswith('linux-gcc'):
-    env.Tool( 'default' )
-    env.Append( LIBS = ['pthread'], CCFLAGS = os.environ.get("CXXFLAGS", "-Wall"), LINKFLAGS=os.environ.get("LDFLAGS", "") )
-    env['SHARED_LIB_ENABLED'] = True
-else:
-    print "UNSUPPORTED PLATFORM."
-    env.Exit(1)
-
-env.Tool('targz')
-env.Tool('srcdist')
-env.Tool('globtool')
-
-env.Append( CPPPATH = ['#include'],
-            LIBPATH = lib_dir )
-short_platform = platform
-if short_platform.startswith('msvc'):
-    short_platform = short_platform[2:]
-# Notes: on Windows you need to rebuild the source for each variant
-# Build script does not support that yet so we only build static libraries.
-# This also fails on AIX because both dynamic and static library ends with
-# extension .a.
-env['SHARED_LIB_ENABLED'] = env.get('SHARED_LIB_ENABLED', False)
-env['LIB_PLATFORM'] = short_platform
-env['LIB_LINK_TYPE'] = 'lib'    # static
-env['LIB_CRUNTIME'] = 'mt'
-env['LIB_NAME_SUFFIX'] = '${LIB_PLATFORM}_${LIB_LINK_TYPE}${LIB_CRUNTIME}'  # must match autolink naming convention
-env['JSONCPP_VERSION'] = JSONCPP_VERSION
-env['BUILD_DIR'] = env.Dir(build_dir)
-env['ROOTBUILD_DIR'] = env.Dir(rootbuild_dir)
-env['DIST_DIR'] = DIST_DIR
-if 'TarGz' in env['BUILDERS']:
-	class SrcDistAdder:
-		def __init__( self, env ):
-			self.env = env
-		def __call__( self, *args, **kw ):
-			apply( self.env.SrcDist, (self.env['SRCDIST_TARGET'],) + args, kw )
-	env['SRCDIST_BUILDER'] = env.TarGz
-else: # If tarfile module is missing
-	class SrcDistAdder:
-		def __init__( self, env ):
-			pass
-		def __call__( self, *args, **kw ):
-			pass
-env['SRCDIST_ADD'] = SrcDistAdder( env )
-env['SRCDIST_TARGET'] = os.path.join( DIST_DIR, 'jsoncpp-src-%s.tar.gz' % env['JSONCPP_VERSION'] )
-                      
-env_testing = env.Clone( )
-env_testing.Append( LIBS = ['json_${LIB_NAME_SUFFIX}'] )
-
-def buildJSONExample( env, target_sources, target_name ):
-    env = env.Clone()
-    env.Append( CPPPATH = ['#'] )
-    exe = env.Program( target=target_name,
-                       source=target_sources )
-    env['SRCDIST_ADD']( source=[target_sources] )
-    global bin_dir
-    return env.Install( bin_dir, exe )
-
-def buildJSONTests( env, target_sources, target_name ):
-    jsontests_node = buildJSONExample( env, target_sources, target_name )
-    check_alias_target = env.Alias( 'check', jsontests_node, RunJSONTests( jsontests_node, jsontests_node ) )
-    env.AlwaysBuild( check_alias_target )
-
-def buildUnitTests( env, target_sources, target_name ):
-    jsontests_node = buildJSONExample( env, target_sources, target_name )
-    check_alias_target = env.Alias( 'check', jsontests_node, 
-                                    RunUnitTests( jsontests_node, jsontests_node ) )
-    env.AlwaysBuild( check_alias_target )
-
-def buildLibrary( env, target_sources, target_name ):
-    static_lib = env.StaticLibrary( target=target_name + '_${LIB_NAME_SUFFIX}',
-                                    source=target_sources )
-    global lib_dir
-    env.Install( lib_dir, static_lib )
-    if env['SHARED_LIB_ENABLED']:
-        shared_lib = env.SharedLibrary( target=target_name + '_${LIB_NAME_SUFFIX}',
-                                        source=target_sources )
-        env.Install( lib_dir, shared_lib )
-    env['SRCDIST_ADD']( source=[target_sources] )
-
-Export( 'env env_testing buildJSONExample buildLibrary buildJSONTests buildUnitTests' )
-
-def buildProjectInDirectory( target_directory ):
-    global build_dir
-    target_build_dir = os.path.join( build_dir, target_directory )
-    target = os.path.join( target_directory, 'sconscript' )
-    SConscript( target, build_dir=target_build_dir, duplicate=0 )
-    env['SRCDIST_ADD']( source=[target] )
-
-
-def runJSONTests_action( target, source = None, env = None ):
-    # Add test scripts to python path
-    jsontest_path = Dir( '#test' ).abspath
-    sys.path.insert( 0, jsontest_path )
-    data_path = os.path.join( jsontest_path, 'data' )
-    import runjsontests
-    return runjsontests.runAllTests( os.path.abspath(source[0].path), data_path )
-
-def runJSONTests_string( target, source = None, env = None ):
-    return 'RunJSONTests("%s")' % source[0]
-
-import SCons.Action
-ActionFactory = SCons.Action.ActionFactory
-RunJSONTests = ActionFactory(runJSONTests_action, runJSONTests_string )
-
-def runUnitTests_action( target, source = None, env = None ):
-    # Add test scripts to python path
-    jsontest_path = Dir( '#test' ).abspath
-    sys.path.insert( 0, jsontest_path )
-    import rununittests
-    return rununittests.runAllTests( os.path.abspath(source[0].path) )
-
-def runUnitTests_string( target, source = None, env = None ):
-    return 'RunUnitTests("%s")' % source[0]
-
-RunUnitTests = ActionFactory(runUnitTests_action, runUnitTests_string )
-
-env.Alias( 'check' )
-
-srcdist_cmd = env['SRCDIST_ADD']( source = """
-    AUTHORS README.md SConstruct
-    """.split() )
-env.Alias( 'src-dist', srcdist_cmd )
-
-buildProjectInDirectory( 'src/jsontestrunner' )
-buildProjectInDirectory( 'src/lib_json' )
-buildProjectInDirectory( 'src/test_lib_json' )
-#print env.Dump()
-

appveyor.yml

@@ -1,30 +1,17 @@
-# This is a comment.
-
-version: build.{build}
-
-os: Windows Server 2012 R2
-
 clone_folder: c:\projects\jsoncpp
 
-platform:
-    - Win32
-    - x64
+environment:
+  matrix:
+    - CMAKE_GENERATOR: Visual Studio 12 2013
+    - CMAKE_GENERATOR: Visual Studio 12 2013 Win64
+    - CMAKE_GENERATOR: Visual Studio 14 2015
+    - CMAKE_GENERATOR: Visual Studio 14 2015 Win64
 
-configuration:
-    - Debug
-    - Release
-
-# scripts to run before build
-before_build:
-    - echo "Running cmake..."
-    - cd c:\projects\jsoncpp
+build_script:
   - cmake --version
-    - set PATH=C:\Program Files (x86)\MSBuild\14.0\Bin;%PATH%
-    - if %PLATFORM% == Win32 cmake .
-    - if %PLATFORM% == x64 cmake -G "Visual Studio 12 2013 Win64" .
-
-build:
-    project: jsoncpp.sln        # path to Visual Studio solution or project
+  - cd c:\projects\jsoncpp
+  - cmake -G "%CMAKE_GENERATOR%" -DCMAKE_INSTALL_PREFIX=%CD:\=/%/install -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=ON .
+  - cmake --build . --config Release --target install
 
 deploy:
     provider: GitHub

devtools/__init__.py

@@ -1,4 +1,4 @@
-# Copyright 2010 The JsonCpp Authors
+# Copyright 2010 Baptiste Lepilleur and The JsonCpp Authors
 # Distributed under MIT license, or public domain if desired and
 # recognized in your jurisdiction.
 # See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

devtools/antglob.py

@@ -1,6 +1,6 @@
 #!/usr/bin/env python
 # encoding: utf-8
-# Copyright 2009 The JsonCpp Authors
+# Copyright 2009 Baptiste Lepilleur and The JsonCpp Authors
 # Distributed under MIT license, or public domain if desired and
 # recognized in your jurisdiction.
 # See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

devtools/fixeol.py

@@ -1,4 +1,4 @@
-# Copyright 2010 The JsonCpp Authors
+# Copyright 2010 Baptiste Lepilleur and The JsonCpp Authors
 # Distributed under MIT license, or public domain if desired and
 # recognized in your jurisdiction.
 # See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

devtools/licenseupdater.py

@@ -6,7 +6,7 @@ from __future__ import print_function
 # and ends with the first blank line.
 LICENSE_BEGIN = "// Copyright "
 
-BRIEF_LICENSE = LICENSE_BEGIN + """2007-2010 The JsonCpp Authors
+BRIEF_LICENSE = LICENSE_BEGIN + """2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

devtools/tarball.py

@@ -1,4 +1,4 @@
-# Copyright 2010 The JsonCpp Authors
+# Copyright 2010 Baptiste Lepilleur and The JsonCpp Authors
 # Distributed under MIT license, or public domain if desired and
 # recognized in your jurisdiction.
 # See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

include/json/allocator.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

include/json/assertions.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

include/json/autolink.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

include/json/config.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
@@ -120,6 +120,9 @@
 #endif
 
 #ifdef __clang__
+#  if __has_extension(attribute_deprecated_with_message)
+#    define JSONCPP_DEPRECATED(message)  __attribute__ ((deprecated(message)))
+#  endif
 #elif defined __GNUC__ // not clang (gcc comes later since clang emulates gcc)
 #  if (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5))
 #    define JSONCPP_DEPRECATED(message)  __attribute__ ((deprecated(message)))

include/json/features.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

include/json/forwards.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

include/json/json.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

include/json/reader.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
@@ -32,7 +32,7 @@ namespace Json {
  *
  * \deprecated Use CharReader and CharReaderBuilder.
  */
-class JSON_API Reader {
+class JSONCPP_DEPRECATED("Use CharReader and CharReaderBuilder instead") JSON_API Reader {
 public:
   typedef char Char;
   typedef const Char* Location;
@@ -230,6 +230,9 @@ private:
   void addComment(Location begin, Location end, CommentPlacement placement);
   void skipCommentTokens(Token& token);
 
+  static bool containsNewLine(Location begin, Location end);
+  static JSONCPP_STRING normalizeEOL(Location begin, Location end);
+
   typedef std::stack<Value*> Nodes;
   Nodes nodes_;
   Errors errors_;

include/json/value.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
@@ -233,7 +233,12 @@ private:
     CZString(CZString&& other);
 #endif
     ~CZString();
-    CZString& operator=(CZString other);
+    CZString& operator=(const CZString& other);
+
+#if JSON_HAS_RVALUE_REFERENCES
+    CZString& operator=(CZString&& other);
+#endif
+
     bool operator<(CZString const& other) const;
     bool operator==(CZString const& other) const;
     ArrayIndex index() const;
@@ -323,11 +328,17 @@ Json::Value obj_value(Json::objectValue); // {}
   /// Deep copy, then swap(other).
   /// \note Over-write existing comments. To preserve comments, use #swapPayload().
   Value& operator=(Value other);
+
   /// Swap everything.
   void swap(Value& other);
   /// Swap values but leave comments and source offsets in place.
   void swapPayload(Value& other);
 
+  /// copy everything.
+  void copy(const Value& other);
+  /// copy values but leave comments and source offsets in place.
+  void copyPayload(const Value& other);
+
   ValueType type() const;
 
   /// Compare payload only, not comments etc.
@@ -438,6 +449,10 @@ Json::Value obj_value(Json::objectValue); // {}
   /// Equivalent to jsonvalue[jsonvalue.size()] = value;
   Value& append(const Value& value);
 
+#if JSON_HAS_RVALUE_REFERENCES
+  Value& append(Value&& value);
+#endif
+
   /// Access an object value by name, create a null member if it does not exist.
   /// \note Because of our implementation, keys are limited to 2^30 -1 chars.
   ///  Exceeding that will cause an exception.
@@ -503,10 +518,12 @@ Json::Value obj_value(Json::objectValue); // {}
   /// \pre type() is objectValue or nullValue
   /// \post type() is unchanged
   /// \deprecated
+  JSONCPP_DEPRECATED("")
   Value removeMember(const char* key);
   /// Same as removeMember(const char*)
   /// \param key may contain embedded nulls.
   /// \deprecated
+  JSONCPP_DEPRECATED("")
   Value removeMember(const JSONCPP_STRING& key);
   /// Same as removeMember(const char* begin, const char* end, Value* removed),
   /// but 'key' is null-terminated.

include/json/version.h

@@ -3,10 +3,10 @@
 #ifndef JSON_VERSION_H_INCLUDED
 # define JSON_VERSION_H_INCLUDED
 
-# define JSONCPP_VERSION_STRING "1.8.1"
+# define JSONCPP_VERSION_STRING "1.8.3"
 # define JSONCPP_VERSION_MAJOR 1
 # define JSONCPP_VERSION_MINOR 8
-# define JSONCPP_VERSION_PATCH 1
+# define JSONCPP_VERSION_PATCH 3
 # define JSONCPP_VERSION_QUALIFIER
 # define JSONCPP_VERSION_HEXA ((JSONCPP_VERSION_MAJOR << 24) | (JSONCPP_VERSION_MINOR << 16) | (JSONCPP_VERSION_PATCH << 8))
 

include/json/writer.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
@@ -140,7 +140,7 @@ public:
 /** \brief Abstract class for writers.
  * \deprecated Use StreamWriter. (And really, this is an implementation detail.)
  */
-class JSON_API Writer {
+class JSONCPP_DEPRECATED("Use StreamWriter instead") JSON_API Writer {
 public:
   virtual ~Writer();
 
@@ -156,7 +156,7 @@ public:
  * \sa Reader, Value
  * \deprecated Use StreamWriterBuilder.
  */
-class JSON_API FastWriter : public Writer {
+class JSONCPP_DEPRECATED("Use StreamWriterBuilder instead") JSON_API FastWriter : public Writer {
 
 public:
   FastWriter();
@@ -209,7 +209,7 @@ private:
  * \sa Reader, Value, Value::setComment()
  * \deprecated Use StreamWriterBuilder.
  */
-class JSON_API StyledWriter : public Writer {
+class JSONCPP_DEPRECATED("Use StreamWriterBuilder instead") JSON_API StyledWriter : public Writer {
 public:
   StyledWriter();
   ~StyledWriter() JSONCPP_OVERRIDE {}
@@ -267,12 +267,14 @@ private:
  * If the Value have comments then they are outputed according to their
  #CommentPlacement.
  *
- * \param indentation Each level will be indented by this amount extra.
  * \sa Reader, Value, Value::setComment()
  * \deprecated Use StreamWriterBuilder.
  */
-class JSON_API StyledStreamWriter {
+class JSONCPP_DEPRECATED("Use StreamWriterBuilder instead") JSON_API StyledStreamWriter {
 public:
+/**
+ * \param indentation Each level will be indented by this amount extra.
+ */
   StyledStreamWriter(JSONCPP_STRING indentation = "\t");
   ~StyledStreamWriter() {}
 

makerelease.py

@@ -1,4 +1,4 @@
-# Copyright 2010 The JsonCpp Authors
+# Copyright 2010 Baptiste Lepilleur and The JsonCpp Authors
 # Distributed under MIT license, or public domain if desired and
 # recognized in your jurisdiction.
 # See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

meson.build

@@ -1,7 +1,7 @@
 project(
   'jsoncpp',
   'cpp',
-  version : '1.8.1',
+  version : '1.8.3',
   default_options : [
     'buildtype=release',
     'warning_level=1'],
@@ -52,7 +52,7 @@ jsoncpp_lib = library(
     'src/lib_json/json_reader.cpp',
     'src/lib_json/json_value.cpp',
     'src/lib_json/json_writer.cpp'],
-  soversion : 18,
+  soversion : 19,
   install : true,
   include_directories : jsoncpp_include_directories)
 

scons-tools/globtool.py

@@ -1,58 +0,0 @@
-# Copyright 2009 The JsonCpp Authors
-# Distributed under MIT license, or public domain if desired and
-# recognized in your jurisdiction.
-# See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
-
-import fnmatch
-import os
-
-def generate(env): 
-   def Glob(env, includes = None, excludes = None, dir = '.'):
-      """Adds Glob(includes = Split('*'), excludes = None, dir = '.')
-       helper function to environment.
-
-       Glob both the file-system files.
-
-       includes: list of file name pattern included in the return list when matched.
-       excludes: list of file name pattern exluced from the return list.
-
-       Example:
-       sources = env.Glob(("*.cpp", '*.h'), "~*.cpp", "#src")
-      """
-      def filterFilename(path):
-         abs_path = os.path.join(dir, path)
-         if not os.path.isfile(abs_path):
-            return 0
-         fn = os.path.basename(path)
-         match = 0
-         for include in includes:
-            if fnmatch.fnmatchcase(fn, include):
-               match = 1
-               break
-         if match == 1 and not excludes is None:
-            for exclude in excludes:
-               if fnmatch.fnmatchcase(fn, exclude):
-                  match = 0
-                  break
-         return match
-      if includes is None:
-         includes = ('*',)
-      elif type(includes) in (type(''), type(u'')):
-         includes = (includes,)
-      if type(excludes) in (type(''), type(u'')):
-         excludes = (excludes,)
-      dir = env.Dir(dir).abspath
-      paths = os.listdir(dir)
-      def makeAbsFileNode(path):
-         return env.File(os.path.join(dir, path))
-      nodes = filter(filterFilename, paths)
-      return map(makeAbsFileNode, nodes)
-
-   from SCons.Script import Environment
-   Environment.Glob = Glob
-
-def exists(env):
-    """
-    Tool always exists.
-    """
-    return True

scons-tools/srcdist.py

@@ -1,183 +0,0 @@
-# Copyright 2007 The JsonCpp Authors
-# Distributed under MIT license, or public domain if desired and
-# recognized in your jurisdiction.
-# See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
-
-import os
-import os.path
-from fnmatch import fnmatch
-import targz
-
-##def DoxyfileParse(file_contents):
-##   """
-##   Parse a Doxygen source file and return a dictionary of all the values.
-##   Values will be strings and lists of strings.
-##   """
-##   data = {}
-##
-##   import shlex
-##   lex = shlex.shlex(instream = file_contents, posix = True)
-##   lex.wordchars += "*+./-:"
-##   lex.whitespace = lex.whitespace.replace("\n", "")
-##   lex.escape = ""
-##
-##   lineno = lex.lineno
-##   last_backslash_lineno = lineno
-##   token = lex.get_token()
-##   key = token   # the first token should be a key
-##   last_token = ""
-##   key_token = False
-##   next_key = False
-##   new_data = True
-##
-##   def append_data(data, key, new_data, token):
-##      if new_data or len(data[key]) == 0:
-##         data[key].append(token)
-##      else:
-##         data[key][-1] += token
-##
-##   while token:
-##      if token in ['\n']:
-##         if last_token not in ['\\']:
-##            key_token = True
-##      elif token in ['\\']:
-##         pass
-##      elif key_token:
-##         key = token
-##         key_token = False
-##      else:
-##         if token == "+=":
-##            if not data.has_key(key):
-##               data[key] = list()
-##         elif token == "=":
-##            data[key] = list()
-##         else:
-##            append_data(data, key, new_data, token)
-##            new_data = True
-##
-##      last_token = token
-##      token = lex.get_token()
-##      
-##      if last_token == '\\' and token != '\n':
-##         new_data = False
-##         append_data(data, key, new_data, '\\')
-##
-##   # compress lists of len 1 into single strings
-##   for (k, v) in data.items():
-##      if len(v) == 0:
-##         data.pop(k)
-##
-##      # items in the following list will be kept as lists and not converted to strings
-##      if k in ["INPUT", "FILE_PATTERNS", "EXCLUDE_PATTERNS"]:
-##         continue
-##
-##      if len(v) == 1:
-##         data[k] = v[0]
-##
-##   return data
-##
-##def DoxySourceScan(node, env, path):
-##   """
-##   Doxygen Doxyfile source scanner.  This should scan the Doxygen file and add
-##   any files used to generate docs to the list of source files.
-##   """
-##   default_file_patterns = [
-##      '*.c', '*.cc', '*.cxx', '*.cpp', '*.c++', '*.java', '*.ii', '*.ixx',
-##      '*.ipp', '*.i++', '*.inl', '*.h', '*.hh ', '*.hxx', '*.hpp', '*.h++',
-##      '*.idl', '*.odl', '*.cs', '*.php', '*.php3', '*.inc', '*.m', '*.mm',
-##      '*.py',
-##   ]
-##
-##   default_exclude_patterns = [
-##      '*~',
-##   ]
-##
-##   sources = []
-##
-##   data = DoxyfileParse(node.get_contents())
-##
-##   if data.get("RECURSIVE", "NO") == "YES":
-##      recursive = True
-##   else:
-##      recursive = False
-##
-##   file_patterns = data.get("FILE_PATTERNS", default_file_patterns)
-##   exclude_patterns = data.get("EXCLUDE_PATTERNS", default_exclude_patterns)
-##
-##   for node in data.get("INPUT", []):
-##      if os.path.isfile(node):
-##         sources.add(node)
-##      elif os.path.isdir(node):
-##         if recursive:
-##            for root, dirs, files in os.walk(node):
-##               for f in files:
-##                  filename = os.path.join(root, f)
-##
-##                  pattern_check = reduce(lambda x, y: x or bool(fnmatch(filename, y)), file_patterns, False)
-##                  exclude_check = reduce(lambda x, y: x and fnmatch(filename, y), exclude_patterns, True)
-##
-##                  if pattern_check and not exclude_check:
-##                     sources.append(filename)
-##         else:
-##            for pattern in file_patterns:
-##               sources.extend(glob.glob("/".join([node, pattern])))
-##   sources = map(lambda path: env.File(path), sources)
-##   return sources
-##
-##
-##def DoxySourceScanCheck(node, env):
-##   """Check if we should scan this file"""
-##   return os.path.isfile(node.path)
-
-def srcDistEmitter(source, target, env):
-##   """Doxygen Doxyfile emitter"""
-##   # possible output formats and their default values and output locations
-##   output_formats = {
-##      "HTML": ("YES", "html"),
-##      "LATEX": ("YES", "latex"),
-##      "RTF": ("NO", "rtf"),
-##      "MAN": ("YES", "man"),
-##      "XML": ("NO", "xml"),
-##   }
-##
-##   data = DoxyfileParse(source[0].get_contents())
-##
-##   targets = []
-##   out_dir = data.get("OUTPUT_DIRECTORY", ".")
-##
-##   # add our output locations
-##   for (k, v) in output_formats.items():
-##      if data.get("GENERATE_" + k, v[0]) == "YES":
-##         targets.append(env.Dir(os.path.join(out_dir, data.get(k + "_OUTPUT", v[1]))))
-##
-##   # don't clobber targets
-##   for node in targets:
-##      env.Precious(node)
-##
-##   # set up cleaning stuff
-##   for node in targets:
-##      env.Clean(node, node)
-##
-##   return (targets, source)
-   return (target,source)
-
-def generate(env):
-   """
-   Add builders and construction variables for the
-   SrcDist tool.
-   """
-##   doxyfile_scanner = env.Scanner(##      DoxySourceScan,
-##      "DoxySourceScan",
-##      scan_check = DoxySourceScanCheck,
-##)
-
-   if targz.exists(env):
-      srcdist_builder = targz.makeBuilder(srcDistEmitter)
-
-      env['BUILDERS']['SrcDist'] = srcdist_builder
-
-def exists(env):
-   """
-   Make sure srcdist exists.
-   """
-   return targz.exists(env)

scons-tools/substinfile.py

@@ -1,85 +0,0 @@
-# Copyright 2010 The JsonCpp Authors
-# Distributed under MIT license, or public domain if desired and
-# recognized in your jurisdiction.
-# See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
-
-import re
-from SCons.Script import *  # the usual scons stuff you get in a SConscript
-import collections
-
-def generate(env):
-    """
-    Add builders and construction variables for the
-    SubstInFile tool.
-
-    Adds SubstInFile builder, which substitutes the keys->values of SUBST_DICT
-    from the source to the target.
-    The values of SUBST_DICT first have any construction variables expanded
-    (its keys are not expanded).
-    If a value of SUBST_DICT is a python callable function, it is called and
-    the result is expanded as the value.
-    If there's more than one source and more than one target, each target gets
-    substituted from the corresponding source.
-    """
-    def do_subst_in_file(targetfile, sourcefile, dict):
-        """Replace all instances of the keys of dict with their values.
-        For example, if dict is {'%VERSION%': '1.2345', '%BASE%': 'MyProg'},
-        then all instances of %VERSION% in the file will be replaced with 1.2345 etc.
-        """
-        try:
-            f = open(sourcefile, 'rb')
-            contents = f.read()
-            f.close()
-        except:
-            raise SCons.Errors.UserError("Can't read source file %s"%sourcefile)
-        for (k,v) in list(dict.items()):
-            contents = re.sub(k, v, contents)
-        try:
-            f = open(targetfile, 'wb')
-            f.write(contents)
-            f.close()
-        except:
-            raise SCons.Errors.UserError("Can't write target file %s"%targetfile)
-        return 0 # success
-
-    def subst_in_file(target, source, env):
-        if 'SUBST_DICT' not in env:
-            raise SCons.Errors.UserError("SubstInFile requires SUBST_DICT to be set.")
-        d = dict(env['SUBST_DICT']) # copy it
-        for (k,v) in list(d.items()):
-            if isinstance(v, collections.Callable):
-                d[k] = env.subst(v()).replace('\\','\\\\')
-            elif SCons.Util.is_String(v):
-                d[k] = env.subst(v).replace('\\','\\\\')
-            else:
-                raise SCons.Errors.UserError("SubstInFile: key %s: %s must be a string or callable"%(k, repr(v)))
-        for (t,s) in zip(target, source):
-            return do_subst_in_file(str(t), str(s), d)
-
-    def subst_in_file_string(target, source, env):
-        """This is what gets printed on the console."""
-        return '\n'.join(['Substituting vars from %s into %s'%(str(s), str(t))
-                          for (t,s) in zip(target, source)])
-
-    def subst_emitter(target, source, env):
-        """Add dependency from substituted SUBST_DICT to target.
-        Returns original target, source tuple unchanged.
-        """
-        d = env['SUBST_DICT'].copy() # copy it
-        for (k,v) in list(d.items()):
-            if isinstance(v, collections.Callable):
-                d[k] = env.subst(v())
-            elif SCons.Util.is_String(v):
-                d[k]=env.subst(v)
-        Depends(target, SCons.Node.Python.Value(d))
-        return target, source
-
-##    env.Append(TOOLS = 'substinfile')       # this should be automaticaly done by Scons ?!?
-    subst_action = SCons.Action.Action(subst_in_file, subst_in_file_string)
-    env['BUILDERS']['SubstInFile'] = Builder(action=subst_action, emitter=subst_emitter)
-
-def exists(env):
-    """
-    Make sure tool exists.
-    """
-    return True

scons-tools/targz.py

@@ -1,87 +0,0 @@
-# Copyright 2007 The JsonCpp Authors
-# Distributed under MIT license, or public domain if desired and
-# recognized in your jurisdiction.
-# See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
-
-"""tarball
-
-Tool-specific initialization for tarball.
-
-"""
-
-## Commands to tackle a command based implementation:
-##to unpack on the fly...
-##gunzip < FILE.tar.gz | tar xvf -
-##to pack on the fly...
-##tar cvf - FILE-LIST | gzip -c > FILE.tar.gz 
-
-import os.path
-
-import SCons.Builder
-import SCons.Node.FS
-import SCons.Util
-
-try:
-    import gzip
-    import tarfile
-    internal_targz = 1
-except ImportError:
-    internal_targz = 0
-
-TARGZ_DEFAULT_COMPRESSION_LEVEL = 9
-
-if internal_targz:
-    def targz(target, source, env):
-        def archive_name(path):
-            path = os.path.normpath(os.path.abspath(path))
-            common_path = os.path.commonprefix((base_dir, path))
-            archive_name = path[len(common_path):]
-            return archive_name
-            
-        def visit(tar, dirname, names):
-            for name in names:
-                path = os.path.join(dirname, name)
-                if os.path.isfile(path):
-                    tar.add(path, archive_name(path))
-        compression = env.get('TARGZ_COMPRESSION_LEVEL',TARGZ_DEFAULT_COMPRESSION_LEVEL)
-        base_dir = os.path.normpath(env.get('TARGZ_BASEDIR', env.Dir('.')).abspath)
-        target_path = str(target[0])
-        fileobj = gzip.GzipFile(target_path, 'wb', compression)
-        tar = tarfile.TarFile(os.path.splitext(target_path)[0], 'w', fileobj)
-        for source in source:
-            source_path = str(source)
-            if source.isdir():
-                os.path.walk(source_path, visit, tar)
-            else:
-                tar.add(source_path, archive_name(source_path))      # filename, arcname
-        tar.close()
-
-    targzAction = SCons.Action.Action(targz, varlist=['TARGZ_COMPRESSION_LEVEL','TARGZ_BASEDIR'])
-
-    def makeBuilder(emitter = None):
-        return SCons.Builder.Builder(action = SCons.Action.Action('$TARGZ_COM', '$TARGZ_COMSTR'),
-                                     source_factory = SCons.Node.FS.Entry,
-                                     source_scanner = SCons.Defaults.DirScanner,
-                                     suffix = '$TARGZ_SUFFIX',
-                                     multi = 1)
-    TarGzBuilder = makeBuilder()
-
-    def generate(env):
-        """Add Builders and construction variables for zip to an Environment.
-           The following environnement variables may be set:
-           TARGZ_COMPRESSION_LEVEL: integer, [0-9]. 0: no compression, 9: best compression (same as gzip compression level).
-           TARGZ_BASEDIR: base-directory used to determine archive name (this allow archive name to be relative
-                          to something other than top-dir).
-        """
-        env['BUILDERS']['TarGz'] = TarGzBuilder
-        env['TARGZ_COM'] = targzAction
-        env['TARGZ_COMPRESSION_LEVEL'] = TARGZ_DEFAULT_COMPRESSION_LEVEL # range 0-9
-        env['TARGZ_SUFFIX']  = '.tar.gz'
-        env['TARGZ_BASEDIR'] = env.Dir('.')     # Sources archive name are made relative to that directory.
-else:
-    def generate(env):
-        pass
-
-
-def exists(env):
-    return internal_targz

src/jsontestrunner/main.cpp

@@ -1,8 +1,11 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
 
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
+
 /* This executable is used for testing parser/writer using real JSON files.
  */
 
@@ -324,3 +327,5 @@ int main(int argc, const char* argv[]) {
     return 1;
   }
 }
+
+#pragma GCC diagnostic pop

src/jsontestrunner/sconscript

@@ -1,9 +0,0 @@
-Import( 'env_testing buildJSONTests' )
-
-buildJSONTests( env_testing, Split( """
-    main.cpp
-     """ ),
-    'jsontestrunner' )
-
-# For 'check' to work, 'libs' must be built first.
-env_testing.Depends('jsontestrunner', '#libs')

src/lib_json/CMakeLists.txt

@@ -95,8 +95,12 @@ ENDIF()
 IF(BUILD_STATIC_LIBS)
     ADD_LIBRARY(jsoncpp_lib_static STATIC ${PUBLIC_HEADERS} ${jsoncpp_sources})
     SET_TARGET_PROPERTIES( jsoncpp_lib_static PROPERTIES VERSION ${JSONCPP_VERSION} SOVERSION ${JSONCPP_SOVERSION})
-    SET_TARGET_PROPERTIES( jsoncpp_lib_static PROPERTIES OUTPUT_NAME jsoncpp
-                           DEBUG_OUTPUT_NAME jsoncpp${DEBUG_LIBNAME_SUFFIX} )
+    # avoid name clashes on windows as the shared import lib is also named jsoncpp.lib
+    if (NOT DEFINED STATIC_SUFFIX AND BUILD_SHARED_LIBS)
+      set (STATIC_SUFFIX "_static")
+    endif ()
+    set_target_properties (jsoncpp_lib_static PROPERTIES OUTPUT_NAME jsoncpp${STATIC_SUFFIX}
+                                                         DEBUG_OUTPUT_NAME jsoncpp${STATIC_SUFFIX}${DEBUG_LIBNAME_SUFFIX})
 
     INSTALL( TARGETS jsoncpp_lib_static ${INSTALL_EXPORT}
              RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR}

src/lib_json/json_reader.cpp

@@ -1,4 +1,4 @@
-// Copyright 2007-2011 Baptiste Lepilleur
+// Copyright 2007-2011 Baptiste Lepilleur and The JsonCpp Authors
 // Copyright (C) 2016 InfoTeCS JSC. All rights reserved.
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
@@ -81,7 +81,7 @@ Features Features::strictMode() {
 // Implementation of class Reader
 // ////////////////////////////////
 
-static bool containsNewLine(Reader::Location begin, Reader::Location end) {
+bool Reader::containsNewLine(Reader::Location begin, Reader::Location end) {
   for (; begin < end; ++begin)
     if (*begin == '\n' || *begin == '\r')
       return true;
@@ -103,8 +103,7 @@ Reader::Reader(const Features& features)
 
 bool
 Reader::parse(const std::string& document, Value& root, bool collectComments) {
-  JSONCPP_STRING documentCopy(document.data(), document.data() + document.capacity());
-  std::swap(documentCopy, document_);
+  document_.assign(document.begin(), document.end());
   const char* begin = document_.c_str();
   const char* end = begin + document_.length();
   return parse(begin, end, root, collectComments);
@@ -370,7 +369,7 @@ bool Reader::readComment() {
   return true;
 }
 
-static JSONCPP_STRING normalizeEOL(Reader::Location begin, Reader::Location end) {
+JSONCPP_STRING Reader::normalizeEOL(Reader::Location begin, Reader::Location end) {
   JSONCPP_STRING normalized;
   normalized.reserve(static_cast<size_t>(end - begin));
   Reader::Location current = begin;
@@ -1019,6 +1018,9 @@ private:
   void addComment(Location begin, Location end, CommentPlacement placement);
   void skipCommentTokens(Token& token);
 
+  static JSONCPP_STRING normalizeEOL(Location begin, Location end);
+  static bool containsNewLine(Location begin, Location end);
+
   typedef std::stack<Value*> Nodes;
   Nodes nodes_;
   Errors errors_;
@@ -1036,6 +1038,13 @@ private:
 
 // complete copy of Read impl, for OurReader
 
+bool OurReader::containsNewLine(OurReader::Location begin, OurReader::Location end) {
+  for (; begin < end; ++begin)
+    if (*begin == '\n' || *begin == '\r')
+      return true;
+  return false;
+}
+
 OurReader::OurReader(OurFeatures const& features)
     : errors_(), document_(), begin_(), end_(), current_(), lastValueEnd_(),
       lastValue_(), commentsBefore_(),
@@ -1345,6 +1354,25 @@ bool OurReader::readComment() {
   return true;
 }
 
+JSONCPP_STRING OurReader::normalizeEOL(OurReader::Location begin, OurReader::Location end) {
+  JSONCPP_STRING normalized;
+  normalized.reserve(static_cast<size_t>(end - begin));
+  OurReader::Location current = begin;
+  while (current != end) {
+    char c = *current++;
+    if (c == '\r') {
+      if (current != end && *current == '\n')
+         // convert dos EOL
+         ++current;
+      // convert Mac EOL
+      normalized += '\n';
+    } else {
+      normalized += c;
+    }
+  }
+  return normalized;
+}
+
 void
 OurReader::addComment(Location begin, Location end, CommentPlacement placement) {
   assert(collectComments_);

src/lib_json/json_tool.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

src/lib_json/json_value.cpp

@@ -1,4 +1,4 @@
-// Copyright 2011 Baptiste Lepilleur
+// Copyright 2011 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
@@ -292,11 +292,21 @@ void Value::CZString::swap(CZString& other) {
   std::swap(index_, other.index_);
 }
 
-Value::CZString& Value::CZString::operator=(CZString other) {
-  swap(other);
+Value::CZString& Value::CZString::operator=(const CZString& other) {
+  cstr_ = other.cstr_;
+  index_ = other.index_;
   return *this;
 }
 
+#if JSON_HAS_RVALUE_REFERENCES
+Value::CZString& Value::CZString::operator=(CZString&& other) {
+  cstr_ = other.cstr_;
+  index_ = other.index_;
+  other.cstr_ = nullptr;
+  return *this;
+}
+#endif
+
 bool Value::CZString::operator<(const CZString& other) const {
   if (!cstr_) return index_ < other.index_;
   //return strcmp(cstr_, other.cstr_) < 0;
@@ -523,6 +533,12 @@ void Value::swapPayload(Value& other) {
   other.allocated_ = temp2 & 0x1;
 }
 
+void Value::copyPayload(const Value& other) {
+  type_ = other.type_;
+  value_ = other.value_;
+  allocated_ = other.allocated_;
+}
+
 void Value::swap(Value& other) {
   swapPayload(other);
   std::swap(comments_, other.comments_);
@@ -530,6 +546,13 @@ void Value::swap(Value& other) {
   std::swap(limit_, other.limit_);
 }
 
+void Value::copy(const Value& other) {
+  copyPayload(other);
+  comments_ = other.comments_;
+  start_ = other.start_;
+  limit_ = other.limit_;
+}
+
 ValueType Value::type() const { return type_; }
 
 int Value::compare(const Value& other) const {
@@ -1124,6 +1147,10 @@ Value const& Value::operator[](CppTL::ConstString const& key) const
 
 Value& Value::append(const Value& value) { return (*this)[size()] = value; }
 
+#if JSON_HAS_RVALUE_REFERENCES
+  Value& Value::append(Value&& value) { return (*this)[size()] = value; }
+#endif
+
 Value Value::get(char const* key, char const* cend, Value const& defaultValue) const
 {
   Value const* found = find(key, cend);
@@ -1426,8 +1453,13 @@ ptrdiff_t Value::getOffsetStart() const { return start_; }
 ptrdiff_t Value::getOffsetLimit() const { return limit_; }
 
 JSONCPP_STRING Value::toStyledString() const {
-  StyledWriter writer;
-  return writer.write(*this);
+  StreamWriterBuilder builder;
+
+  JSONCPP_STRING out = this->hasComment(commentBefore) ? "\n" : "";
+  out += Json::writeString(builder, *this);
+  out += "\n";
+
+  return out;
 }
 
 Value::const_iterator Value::begin() const {

src/lib_json/json_valueiterator.inl

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

src/lib_json/json_writer.cpp

@@ -1,4 +1,4 @@
-// Copyright 2011 Baptiste Lepilleur
+// Copyright 2011 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
@@ -153,7 +153,7 @@ JSONCPP_STRING valueToString(double value, bool useSpecialFloats, unsigned int p
     fixNumericLocale(buffer, buffer + len);
 
     // try to ensure we preserve the fact that this was given to us as a double on input
-    if (!strstr(buffer, ".") && !strstr(buffer, "e")) {
+    if (!strchr(buffer, '.') && !strchr(buffer, 'e')) {
       strcat(buffer, ".0");
     }
 
@@ -582,7 +582,7 @@ void StyledWriter::writeCommentBeforeValue(const Value& root) {
   while (iter != comment.end()) {
     document_ += *iter;
     if (*iter == '\n' &&
-       (iter != comment.end() && *(iter + 1) == '/'))
+       ((iter+1) != comment.end() && *(iter + 1) == '/'))
       writeIndent();
     ++iter;
   }
@@ -798,7 +798,7 @@ void StyledStreamWriter::writeCommentBeforeValue(const Value& root) {
   while (iter != comment.end()) {
     *document_ << *iter;
     if (*iter == '\n' &&
-       (iter != comment.end() && *(iter + 1) == '/'))
+       ((iter+1) != comment.end() && *(iter + 1) == '/'))
       // writeIndent();  // would include newline
       *document_ << indentString_;
     ++iter;
@@ -1086,7 +1086,7 @@ void BuiltStyledStreamWriter::writeCommentBeforeValue(Value const& root) {
   while (iter != comment.end()) {
     *sout_ << *iter;
     if (*iter == '\n' &&
-       (iter != comment.end() && *(iter + 1) == '/'))
+       ((iter+1) != comment.end() && *(iter + 1) == '/'))
       // writeIndent();  // would write extra newline
       *sout_ << indentString_;
     ++iter;

src/lib_json/sconscript

@@ -1,8 +0,0 @@
-Import( 'env buildLibrary' )
-
-buildLibrary( env, Split( """
-    json_reader.cpp 
-    json_value.cpp 
-    json_writer.cpp
-     """ ),
-    'json' )

src/test_lib_json/jsontest.cpp

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

src/test_lib_json/jsontest.h

@@ -1,4 +1,4 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

src/test_lib_json/main.cpp

@@ -1,8 +1,11 @@
-// Copyright 2007-2010 Baptiste Lepilleur
+// Copyright 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
 // Distributed under MIT license, or public domain if desired and
 // recognized in your jurisdiction.
 // See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE
 
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
+
 #include "jsontest.h"
 #include <json/config.h>
 #include <json/json.h>
@@ -2587,3 +2590,5 @@ int main(int argc, const char* argv[]) {
 
   return runner.runCommandLine(argc, argv);
 }
+
+#pragma GCC diagnostic pop

src/test_lib_json/sconscript

@@ -1,10 +0,0 @@
-Import( 'env_testing buildUnitTests' )
-
-buildUnitTests( env_testing, Split( """
-    main.cpp
-    jsontest.cpp
-     """ ),
-    'test_lib_json' )
-
-# For 'check' to work, 'libs' must be built first.
-env_testing.Depends('test_lib_json', '#libs')

test/cleantests.py

@@ -1,4 +1,4 @@
-# Copyright 2007 The JsonCpp Authors
+# Copyright 2007 Baptiste Lepilleur and The JsonCpp Authors
 # Distributed under MIT license, or public domain if desired and
 # recognized in your jurisdiction.
 # See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

test/generate_expected.py

@@ -1,4 +1,4 @@
-# Copyright 2007 The JsonCpp Authors
+# Copyright 2007 Baptiste Lepilleur and The JsonCpp Authors
 # Distributed under MIT license, or public domain if desired and
 # recognized in your jurisdiction.
 # See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

test/pyjsontestrunner.py

@@ -1,4 +1,4 @@
-# Copyright 2007 The JsonCpp Authors
+# Copyright 2007 Baptiste Lepilleur and The JsonCpp Authors
 # Distributed under MIT license, or public domain if desired and
 # recognized in your jurisdiction.
 # See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

test/runjsontests.py

@@ -1,4 +1,4 @@
-# Copyright 2007 The JsonCpp Authors
+# Copyright 2007 Baptiste Lepilleur and The JsonCpp Authors
 # Distributed under MIT license, or public domain if desired and
 # recognized in your jurisdiction.
 # See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

test/rununittests.py

@@ -1,4 +1,4 @@
-# Copyright 2009 The JsonCpp Authors
+# Copyright 2009 Baptiste Lepilleur and The JsonCpp Authors
 # Distributed under MIT license, or public domain if desired and
 # recognized in your jurisdiction.
 # See file LICENSE for detail or copy at http://jsoncpp.sourceforge.net/LICENSE

version

@@ -1 +1 @@
-1.8.1
+1.8.3