update for 1.2.4

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

RELEASE

@@ -1 +1 @@
-1.2.2
+1.2.4

VERSION

@@ -1 +1 @@
-1.2.2
+1.2.4

doc/Doxyfile

@@ -31,7 +31,7 @@ PROJECT_NAME           = FFmpeg
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 1.2.2
+PROJECT_NUMBER         = 1.2.4
 
 # With the PROJECT_LOGO tag one can specify an logo or icon that is included
 # in the documentation. The maximum height of the logo should not exceed 55

doc/decoders.texi

@@ -60,6 +60,78 @@ This decoder generates wave patterns according to predefined sequences. Its
 use is purely internal and the format of the data it accepts is not publicly
 documented.
 
+@section libcelt
+
+libcelt decoder wrapper
+
+libcelt allows libavcodec to decode the Xiph CELT ultra-low delay audio codec.
+Requires the presence of the libcelt headers and library during configuration.
+You need to explicitly configure the build with @code{--enable-libcelt}.
+
+@section libgsm
+
+libgsm decoder wrapper
+
+libgsm allows libavcodec to decode the GSM full rate audio codec. Requires
+the presence of the libgsm headers and library during configuration. You need
+to explicitly configure the build with @code{--enable-libgsm}.
+
+This decoder supports both the ordinary GSM and the Microsoft variant.
+
+@section libilbc
+
+libilbc decoder wrapper
+
+libilbc allows libavcodec to decode the Internet Low Bitrate Codec (iLBC)
+audio codec. Requires the presence of the libilbc headers and library during
+configuration. You need to explicitly configure the build with
+@code{--enable-libilbc}.
+
+@subsection Options
+
+The following option is supported by the libilbc wrapper.
+
+@table @option
+@item enhance
+
+Enable the enhancement of the decoded audio when set to 1. The default
+value is 0 (disabled).
+
+@end table
+
+@section libopencore-amrnb
+
+libopencore-amrnb decoder wrapper
+
+libopencore-amrnb allows libavcodec to decode the Adaptive Multi-Rate
+Narrowband audio codec. Using it requires the presence of the
+libopencore-amrnb headers and library during configuration. You need to
+explicitly configure the build with @code{--enable-libopencore-amrnb}.
+
+An FFmpeg native decoder for AMR-NB exists, so users can decode AMR-NB
+without this library.
+
+@section libopencore-amrwb
+
+libopencore-amrwb decoder wrapper.
+
+libopencore-amrwb allows libavcodec to decode the Adaptive Multi-Rate
+Wideband audio codec. Using it requires the presence of the
+libopencore-amrwb headers and library during configuration. You need to
+explicitly configure the build with @code{--enable-libopencore-amrwb}.
+
+An FFmpeg native decoder for AMR-WB exists, so users can decode AMR-WB
+without this library.
+
+@section libopus
+
+libopus decoder wrapper.
+
+libopus allows libavcodec to decode the Opus Interactive Audio Codec.
+Requires the presence of the libopus headers and library during
+configuration. You need to explicitly configure the build with
+@code{--enable-libopus}.
+
 @c man end AUDIO DECODERS
 
 @chapter Subtitles Decoders

doc/encoders.texi

@@ -25,6 +25,95 @@ enabled encoders.
 A description of some of the currently available audio encoders
 follows.
 
+@anchor{aacenc}
+@section aac
+
+Advanced Audio Coding (AAC) encoder.
+
+This encoder is an experimental FFmpeg-native AAC encoder. Currently only the
+low complexity (AAC-LC) profile is supported. To use this encoder, you must set
+@option{strict} option to @samp{experimental} or lower.
+
+As this encoder is experimental, unexpected behavior may exist from time to
+time. For a more stable AAC encoder, see @ref{libvo-aacenc}. However, be warned
+that it has a worse quality reported by some users.
+
+@c Comment this out until somebody writes the respective documentation.
+@c See also @ref{libfaac}, @ref{libaacplus}, and @ref{libfdk-aac-enc}.
+
+@subsection Options
+
+@table @option
+@item b
+Set bit rate in bits/s. Setting this automatically activates constant bit rate
+(CBR) mode.
+
+@item q
+Set quality for variable bit rate (VBR) mode. This option is valid only using
+the @command{ffmpeg} command-line tool. For library interface users, use
+@option{global_quality}.
+
+@item stereo_mode
+Set stereo encoding mode. Possible values:
+
+@table @samp
+@item auto
+Automatically selected by the encoder.
+
+@item ms_off
+Disable middle/side encoding. This is the default.
+
+@item ms_force
+Force middle/side encoding.
+@end table
+
+@item aac_coder
+Set AAC encoder coding method. Possible values:
+
+@table @samp
+@item 0
+FAAC-inspired method.
+
+This method is a simplified reimplementation of the method used in FAAC, which
+sets thresholds proportional to the band energies, and then decreases all the
+thresholds with quantizer steps to find the appropriate quantization with
+distortion below threshold band by band.
+
+The quality of this method is comparable to the two loop searching method
+descibed below, but somewhat a little better and slower.
+
+@item 1
+Average noise to mask ratio (ANMR) trellis-based solution.
+
+This has a theoretic best quality out of all the coding methods, but at the
+cost of the slowest speed.
+
+@item 2
+Two loop searching (TLS) method.
+
+This method first sets quantizers depending on band thresholds and then tries
+to find an optimal combination by adding or subtracting a specific value from
+all quantizers and adjusting some individual quantizer a little.
+
+This method produces similar quality with the FAAC method and is the default.
+
+@item 3
+Constant quantizer method.
+
+This method sets a constant quantizer for all bands. This is the fastest of all
+the methods, yet produces the worst quality.
+
+@end table
+
+@end table
+
+@subsection Tips and Tricks
+
+According to some reports
+(e.g. @url{http://d.hatena.ne.jp/kamedo2/20120729/1343545890}), setting the
+@option{cutoff} option to 15000 Hz greatly improves the quality of the output
+quality. As a result, we encourage you to do the same.
+
 @section ac3 and ac3_fixed
 
 AC-3 audio encoders.
@@ -412,6 +501,279 @@ Selected by Encoder (default)
 
 @end table
 
+@section libmp3lame
+
+LAME (Lame Ain't an MP3 Encoder) MP3 encoder wrapper
+
+Requires the presence of the libmp3lame headers and library during
+configuration. You need to explicitly configure the build with
+@code{--enable-libmp3lame}.
+
+@subsection Options
+
+The following options are supported by the libmp3lame wrapper. The
+@command{lame}-equivalent of the options are listed in parentheses.
+
+@table @option
+@item b (@emph{-b})
+Set bitrate expressed in bits/s for CBR. LAME @code{bitrate} is
+expressed in kilobits/s.
+
+@item q (@emph{-V})
+Set constant quality setting for VBR. This option is valid only
+using the @command{ffmpeg} command-line tool. For library interface
+users, use @option{global_quality}.
+
+@item compression_level (@emph{-q})
+Set algorithm quality. Valid arguments are integers in the 0-9 range,
+with 0 meaning highest quality but slowest, and 9 meaning fastest
+while producing the worst quality.
+
+@item reservoir
+Enable use of bit reservoir when set to 1. Default value is 1. LAME
+has this enabled by default, but can be overriden by use
+@option{--nores} option.
+
+@end table
+
+@section libopencore-amrnb
+
+OpenCORE Adaptive Multi-Rate Narrowband encoder.
+
+Requires the presence of the libopencore-amrnb headers and library during
+configuration. You need to explicitly configure the build with
+@code{--enable-libopencore-amrnb --enable-version3}.
+
+This is a mono-only encoder. Officially it only supports 8000Hz sample rate,
+but you can override it by setting @option{strict} to @samp{unofficial} or
+lower.
+
+@subsection Options
+
+@table @option
+
+@item b
+Set bitrate in bits per second. Only the following bitrates are supported,
+otherwise libavcodec will round to the nearest valid bitrate.
+
+@table @option
+@item 4750
+@item 5150
+@item 5900
+@item 6700
+@item 7400
+@item 7950
+@item 10200
+@item 12200
+@end table
+
+@item dtx
+Allow discontinuous transmission (generate comfort noise) when set to 1. The
+default value is 0 (disabled).
+
+@end table
+
+@section libtwolame
+
+TwoLAME MP2 encoder wrapper
+
+Requires the presence of the libtwolame headers and library during
+configuration. You need to explicitly configure the build with
+@code{--enable-libtwolame}.
+
+@subsection Options
+
+The following options are supported by the libtwolame wrapper. The
+@command{twolame}-equivalent options follow the FFmpeg ones and are in
+parentheses.
+
+@table @option
+@item b (@emph{-b})
+Set bitrate expressed in bits/s for CBR. @command{twolame} @option{b}
+option is expressed in kilobits/s. Default value is 128k.
+
+@item q (@emph{-V})
+Set quality for experimental VBR support. Maximum value range is
+from -50 to 50, useful range is from -10 to 10. The higher the
+value, the better the quality. This option is valid only using the
+@command{ffmpeg} command-line tool. For library interface users,
+use @option{global_quality}.
+
+@item mode (@emph{--mode})
+Set the mode of the resulting audio. Possible values:
+
+@table @samp
+@item auto
+Choose mode automatically based on the input. This is the default.
+@item stereo
+Stereo
+@item joint_stereo
+Joint stereo
+@item dual_channel
+Dual channel
+@item mono
+Mono
+@end table
+
+@item psymodel (@emph{--psyc-mode})
+Set psychoacoustic model to use in encoding. The argument must be
+an integer between -1 and 4, inclusive. The higher the value, the
+better the quality. The default value is 3.
+
+@item energy_levels (@emph{--energy})
+Enable energy levels extensions when set to 1. The default value is
+0 (disabled).
+
+@item error_protection (@emph{--protect})
+Enable CRC error protection when set to 1. The default value is 0
+(disabled).
+
+@item copyright (@emph{--copyright})
+Set MPEG audio copyright flag when set to 1. The default value is 0
+(disabled).
+
+@item original (@emph{--original})
+Set MPEG audio original flag when set to 1. The default value is 0
+(disabled).
+
+@end table
+
+@anchor{libvo-aacenc}
+@section libvo-aacenc
+
+VisualOn AAC encoder
+
+Requires the presence of the libvo-aacenc headers and library during
+configuration. You need to explicitly configure the build with
+@code{--enable-libvo-aacenc --enable-version3}.
+
+This encoder is considered to be worse than the
+@ref{aacenc,,native experimental FFmpeg AAC encoder}, according to
+multiple sources.
+
+@subsection Options
+
+The VisualOn AAC encoder only support encoding AAC-LC and up to 2
+channels. It is also CBR-only.
+
+@table @option
+
+@item b
+Set bit rate in bits/s.
+
+@end table
+
+@section libvo-amrwbenc
+
+VisualOn Adaptive Multi-Rate Wideband encoder
+
+Requires the presence of the libvo-amrwbenc headers and library during
+configuration. You need to explicitly configure the build with
+@code{--enable-libvo-amrwbenc --enable-version3}.
+
+This is a mono-only encoder. Officially it only supports 16000Hz sample
+rate, but you can override it by setting @option{strict} to
+@samp{unofficial} or lower.
+
+@subsection Options
+
+@table @option
+
+@item b
+Set bitrate in bits/s. Only the following bitrates are supported, otherwise
+libavcodec will round to the nearest valid bitrate.
+
+@table @samp
+@item 6600
+@item 8850
+@item 12650
+@item 14250
+@item 15850
+@item 18250
+@item 19850
+@item 23050
+@item 23850
+@end table
+
+@item dtx
+Allow discontinuous transmission (generate comfort noise) when set to 1. The
+default value is 0 (disabled).
+
+@end table
+
+@section libopus
+
+libopus Opus Interactive Audio Codec encoder wrapper.
+
+Requires the presence of the libopus headers and library during
+configuration. You need to explicitly configure the build with
+@code{--enable-libopus}.
+
+@subsection Option Mapping
+
+Most libopus options are modeled after the @command{opusenc} utility from
+opus-tools. The following is an option mapping chart describing options
+supported by the libopus wrapper, and their @command{opusenc}-equivalent
+in parentheses.
+
+@table @option
+
+@item b (@emph{bitrate})
+Set the bit rate in bits/s.  FFmpeg's @option{b} option is
+expressed in bits/s, while @command{opusenc}'s @option{bitrate} in
+kilobits/s.
+
+@item vbr (@emph{vbr}, @emph{hard-cbr}, and @emph{cvbr})
+Set VBR mode. The FFmpeg @option{vbr} option has the following
+valid arguments, with the their @command{opusenc} equivalent options
+in parentheses:
+
+@table @samp
+@item off (@emph{hard-cbr})
+Use constant bit rate encoding.
+
+@item on (@emph{vbr})
+Use variable bit rate encoding (the default).
+
+@item constrained (@emph{cvbr})
+Use constrained variable bit rate encoding.
+@end table
+
+@item compression_level (@emph{comp})
+Set encoding algorithm complexity. Valid options are integers in
+the 0-10 range. 0 gives the fastest encodes but lower quality, while 10
+gives the highest quality but slowest encoding. The default is 10.
+
+@item frame_duration (@emph{framesize})
+Set maximum frame size, or duration of a frame in milliseconds. The
+argument must be exactly the following: 2.5, 5, 10, 20, 40, 60. Smaller
+frame sizes achieve lower latency but less quality at a given bitrate.
+Sizes greater than 20ms are only interesting at fairly low bitrates.
+The default of FFmpeg is 10ms, but is 20ms in @command{opusenc}.
+
+@item packet_loss (@emph{expect-loss})
+Set expected packet loss percentage. The default is 0.
+
+@item application (N.A.)
+Set intended application type. Valid options are listed below:
+
+@table @samp
+@item voip
+Favor improved speech intelligibility.
+@item audio
+Favor faithfulness to the input (the default).
+@item lowdelay
+Restrict to only the lowest delay modes.
+@end table
+
+@item cutoff (N.A.)
+Set cutoff bandwidth in Hz. The argument must be exactly one of the
+following: 4000, 6000, 8000, 12000, or 20000, corresponding to
+narrowband, mediumband, wideband, super wideband, and fullband
+respectively. The default is 0 (cutoff disabled).
+
+@end table
+
 @c man end AUDIO ENCODERS
 
 @chapter Video Encoders
@@ -583,178 +945,318 @@ For more information about libvpx see:
 
 x264 H.264/MPEG-4 AVC encoder wrapper
 
-Requires the presence of the libx264 headers and library during
-configuration. You need to explicitly configure the build with
+This encoder requires the presence of the libx264 headers and library
+during configuration. You need to explicitly configure the build with
 @code{--enable-libx264}.
 
-x264 supports an impressive number of features, including 8x8 and 4x4 adaptive
-spatial transform, adaptive B-frame placement, CAVLC/CABAC entropy coding,
-interlacing (MBAFF), lossless mode, psy optimizations for detail retention
-(adaptive quantization, psy-RD, psy-trellis).
+libx264 supports an impressive number of features, including 8x8 and
+4x4 adaptive spatial transform, adaptive B-frame placement, CAVLC/CABAC
+entropy coding, interlacing (MBAFF), lossless mode, psy optimizations
+for detail retention (adaptive quantization, psy-RD, psy-trellis).
 
-The FFmpeg wrapper provides a mapping for most of them using global options
-that match those of the encoders and provides private options for the unique
-encoder options. Additionally an expert override is provided to directly pass
-a list of key=value tuples as accepted by x264_param_parse.
+Many libx264 encoder options are mapped to FFmpeg global codec
+options, while unique encoder options are provided through private
+options. Additionally the @option{x264opts} and @option{x264-params}
+private options allows to pass a list of key=value tuples as accepted
+by the libx264 @code{x264_param_parse} function.
 
-@subsection Option Mapping
+The x264 project website is at
+@url{http://www.videolan.org/developers/x264.html}.
 
-The following options are supported by the x264 wrapper, the x264-equivalent
-options follow the FFmpeg ones.
+@subsection Options
 
-@multitable @columnfractions .2 .2
-@item b                 @tab bitrate
-FFmpeg @code{b} option is expressed in bits/s, x264 @code{bitrate} in kilobits/s.
-@item bf                @tab bframes
-Maximum number of B-frames.
-@item g                 @tab keyint
-Maximum GOP size.
-@item qmin              @tab qpmin
-@item qmax              @tab qpmax
-@item qdiff             @tab qpstep
-@item qblur             @tab qblur
-@item qcomp             @tab qcomp
-@item refs              @tab ref
-@item sc_threshold      @tab scenecut
-@item trellis           @tab trellis
-@item nr                @tab nr
-Noise reduction.
-@item me_range          @tab merange
-@item me_method         @tab me
-@item subq              @tab subme
-@item b_strategy        @tab b-adapt
-@item keyint_min        @tab keyint-min
-@item coder             @tab cabac
-Set coder to @code{ac} to use CABAC.
-@item cmp               @tab chroma-me
-Set to @code{chroma} to use chroma motion estimation.
-@item threads           @tab threads
-@item thread_type       @tab sliced_threads
-Set to @code{slice} to use sliced threading instead of frame threading.
-@item flags -cgop       @tab open-gop
-Set @code{-cgop} to use recovery points to close GOPs.
-@item rc_init_occupancy @tab vbv-init
-Initial buffer occupancy.
-@end multitable
+The following options are supported by the libx264 wrapper. The
+@command{x264}-equivalent options or values are listed in parentheses
+for easy migration.
+
+To reduce the duplication of documentation, only the private options
+and some others requiring special attention are documented here. For
+the documentation of the undocumented generic options, see
+@ref{codec-options,,the Codec Options chapter}.
+
+To get a more accurate and extensive documentation of the libx264
+options, invoke the command @command{x264 --full-help} or consult
+the libx264 documentation.
 
-@subsection Private Options
 @table @option
-@item -preset @var{string}
-Set the encoding preset (cf. x264 --fullhelp).
-@item -tune @var{string}
-Tune the encoding params (cf. x264 --fullhelp).
-@item -profile @var{string}
-Set profile restrictions (cf. x264 --fullhelp).
-@item -fastfirstpass @var{integer}
-Use fast settings when encoding first pass.
-@item -crf @var{float}
-Select the quality for constant quality mode.
-@item -crf_max @var{float}
-In CRF mode, prevents VBV from lowering quality beyond this point.
-@item -qp @var{integer}
-Constant quantization parameter rate control method.
-@item -aq-mode @var{integer}
-AQ method
+@item b (@emph{bitrate})
+Set bitrate in bits/s. Note that FFmpeg's @option{b} option is
+expressed in bits/s, while @command{x264}'s @option{bitrate} is in
+kilobits/s.
+
+@item bf (@emph{bframes})
+
+@item g (@emph{keyint})
+
+@item qmax (@emph{qpmax})
+
+@item qmin (@emph{qpmin})
+
+@item qdiff (@emph{qpstep})
+
+@item qblur (@emph{qblur})
+
+@item qcomp (@emph{qcomp})
+
+@item refs (@emph{ref})
+
+@item sc_threshold (@emph{scenecut})
+
+@item trellis (@emph{trellis})
+
+@item nr  (@emph{nr})
+
+@item me_range (@emph{merange})
+
+@item me_method (@emph{me})
+Set motion estimation method. Possible values in the decreasing order
+of speed:
 
-Possible values:
 @table @samp
-@item none
+@item dia (@emph{dia})
+@item epzs (@emph{dia})
+Diamond search with radius 1 (fastest). @samp{epzs} is an alias for
+@samp{dia}.
+@item hex (@emph{hex})
+Hexagonal search with radius 2.
+@item umh (@emph{umh})
+Uneven multi-hexagon search.
+@item esa (@emph{esa})
+Exhaustive search.
+@item tesa (@emph{tesa})
+Hadamard exhaustive search (slowest).
+@end table
 
-@item variance
+@item subq (@emph{subme})
+
+@item b_strategy (@emph{b-adapt})
+
+@item keyint_min (@emph{min-keyint})
+
+@item coder
+Set entropy encoder. Possible values:
+
+@table @samp
+@item ac
+Enable CABAC.
+
+@item vlc
+Enable CAVLC and disable CABAC. It generates the same effect as
+@command{x264}'s @option{--no-cabac} option.
+@end table
+
+@item cmp
+Set full pixel motion estimation comparation algorithm. Possible values:
+
+@table @samp
+@item chroma
+Enable chroma in motion estimation.
+
+@item sad
+Ignore chroma in motion estimation. It generates the same effect as
+@command{x264}'s @option{--no-chroma-me} option.
+@end table
+
+@item threads (@emph{threads})
+
+@item thread_type
+Set multithreading technique. Possible values:
+
+@table @samp
+@item slice
+Slice-based multithreading. It generates the same effect as
+@command{x264}'s @option{--sliced-threads} option.
+@item frame
+Frame-based multithreading.
+@end table
+
+@item flags
+Set encoding flags. It can be used to disable closed GOP and enable
+open GOP by setting it to @code{-cgop}. The result is similar to
+the behavior of @command{x264}'s @option{--open-gop} option.
+
+@item rc_init_occupancy (@emph{vbv-init})
+
+@item preset (@emph{preset})
+Set the encoding preset.
+
+@item tune (@emph{tune})
+Set tuning of the encoding params.
+
+@item profile (@emph{profile})
+Set profile restrictions.
+
+@item fastfirstpass
+Enable fast settings when encoding first pass, when set to 1. When set
+to 0, it has the same effect of @command{x264}'s
+@option{--slow-firstpass} option.
+
+@item crf (@emph{crf})
+Set the quality for constant quality mode.
+
+@item crf_max (@emph{crf-max})
+In CRF mode, prevents VBV from lowering quality beyond this point.
+
+@item qp (@emph{qp})
+Set constant quantization rate control method parameter.
+
+@item aq-mode (@emph{aq-mode})
+Set AQ method. Possible values:
+
+@table @samp
+@item none (@emph{0})
+Disabled.
+
+@item variance (@emph{1})
 Variance AQ (complexity mask).
-@item autovariance
+
+@item autovariance (@emph{2})
 Auto-variance AQ (experimental).
 @end table
-@item -aq-strength @var{float}
-AQ strength, reduces blocking and blurring in flat and textured areas.
-@item -psy @var{integer}
-Use psychovisual optimizations.
-@item -psy-rd @var{string}
-Strength of psychovisual optimization, in <psy-rd>:<psy-trellis> format.
-@item -rc-lookahead @var{integer}
-Number of frames to look ahead for frametype and ratecontrol.
-@item -weightb @var{integer}
-Weighted prediction for B-frames.
-@item -weightp @var{integer}
-Weighted prediction analysis method.
 
-Possible values:
+@item aq-strength (@emph{aq-strength})
+Set AQ strength, reduce blocking and blurring in flat and textured areas.
+
+@item psy
+Use psychovisual optimizations when set to 1. When set to 0, it has the
+same effect as @command{x264}'s @option{--no-psy} option.
+
+@item psy-rd  (@emph{psy-rd})
+Set strength of psychovisual optimization, in
+@var{psy-rd}:@var{psy-trellis} format.
+
+@item rc-lookahead (@emph{rc-lookahead})
+Set number of frames to look ahead for frametype and ratecontrol.
+
+@item weightb
+Enable weighted prediction for B-frames when set to 1. When set to 0,
+it has the same effect as @command{x264}'s @option{--no-weightb} option.
+
+@item weightp (@emph{weightp})
+Set weighted prediction method for P-frames. Possible values:
+
 @table @samp
-@item none
-
-@item simple
-
-@item smart
-
+@item none (@emph{0})
+Disabled
+@item simple (@emph{1})
+Enable only weighted refs
+@item smart (@emph{2})
+Enable both weighted refs and duplicates
 @end table
-@item -ssim @var{integer}
-Calculate and print SSIM stats.
-@item -intra-refresh @var{integer}
-Use Periodic Intra Refresh instead of IDR frames.
-@item -b-bias @var{integer}
-Influences how often B-frames are used.
-@item -b-pyramid @var{integer}
-Keep some B-frames as references.
 
-Possible values:
+@item ssim (@emph{ssim})
+Enable calculation and printing SSIM stats after the encoding.
+
+@item intra-refresh (@emph{intra-refresh})
+Enable the use of Periodic Intra Refresh instead of IDR frames when set
+to 1.
+
+@item b-bias (@emph{b-bias})
+Set the influence on how often B-frames are used.
+
+@item b-pyramid (@emph{b-pyramid})
+Set method for keeping of some B-frames as references. Possible values:
+
 @table @samp
-@item none
-
-@item strict
+@item none (@emph{none})
+Disabled.
+@item strict (@emph{strict})
 Strictly hierarchical pyramid.
-@item normal
+@item normal (@emph{normal})
 Non-strict (not Blu-ray compatible).
 @end table
-@item -mixed-refs @var{integer}
-One reference per partition, as opposed to one reference per macroblock.
-@item -8x8dct @var{integer}
-High profile 8x8 transform.
-@item -fast-pskip @var{integer}
-@item -aud @var{integer}
-Use access unit delimiters.
-@item -mbtree @var{integer}
-Use macroblock tree ratecontrol.
-@item -deblock @var{string}
-Loop filter parameters, in <alpha:beta> form.
-@item -cplxblur @var{float}
-Reduce fluctuations in QP (before curve compression).
-@item -partitions @var{string}
-A comma-separated list of partitions to consider, possible values: p8x8, p4x4, b8x8, i8x8, i4x4, none, all.
-@item -direct-pred @var{integer}
-Direct MV prediction mode
 
-Possible values:
+@item mixed-refs
+Enable the use of one reference per partition, as opposed to one
+reference per macroblock when set to 1. When set to 0, it has the
+same effect as @command{x264}'s @option{--no-mixed-refs} option.
+
+@item 8x8dct
+Enable adaptive spatial transform (high profile 8x8 transform)
+when set to 1. When set to 0, it has the same effect as
+@command{x264}'s @option{--no-8x8dct} option.
+
+@item fast-pskip
+Enable early SKIP detection on P-frames when set to 1. When set
+to 0, it has the same effect as @command{x264}'s
+@option{--no-fast-pskip} option.
+
+@item aud (@emph{aud})
+Enable use of access unit delimiters when set to 1.
+
+@item mbtree
+Enable use macroblock tree ratecontrol when set to 1. When set
+to 0, it has the same effect as @command{x264}'s
+@option{--no-mbtree} option.
+
+@item deblock (@emph{deblock})
+Set loop filter parameters, in @var{alpha}:@var{beta} form.
+
+@item cplxblur (@emph{cplxblur})
+Set fluctuations reduction in QP (before curve compression).
+
+@item partitions (@emph{partitions})
+Set partitions to consider as a comma-separated list of. Possible
+values in the list:
+
 @table @samp
-@item none
-
-@item spatial
-
-@item temporal
-
-@item auto
-
-@end table
-@item -slice-max-size @var{integer}
-Limit the size of each slice in bytes.
-@item -stats @var{string}
-Filename for 2 pass stats.
-@item -nal-hrd @var{integer}
-Signal HRD information (requires vbv-bufsize; cbr not allowed in .mp4).
-
-Possible values:
-@table @samp
-@item none
-
-@item vbr
-
-@item cbr
-
+@item p8x8
+8x8 P-frame partition.
+@item p4x4
+4x4 P-frame partition.
+@item b8x8
+4x4 B-frame partition.
+@item i8x8
+8x8 I-frame partition.
+@item i4x4
+4x4 I-frame partition.
+(Enabling @samp{p4x4} requires @samp{p8x8} to be enabled. Enabling
+@samp{i8x8} requires adaptive spatial transform (@option{8x8dct}
+option) to be enabled.)
+@item none (@emph{none})
+Do not consider any partitions.
+@item all (@emph{all})
+Consider every partition.
 @end table
 
-@item x264opts @var{options}
-Allow to set any x264 option, see @code{x264 --fullhelp} for a list.
+@item direct-pred (@emph{direct})
+Set direct MV prediction mode. Possible values:
 
-@var{options} is a list of @var{key}=@var{value} couples separated by
+@table @samp
+@item none (@emph{none})
+Disable MV prediction.
+@item spatial (@emph{spatial})
+Enable spatial predicting.
+@item temporal (@emph{temporal})
+Enable temporal predicting.
+@item auto (@emph{auto})
+Automatically decided.
+@end table
+
+@item slice-max-size (@emph{slice-max-size})
+Set the limit of the size of each slice in bytes. If not specified
+but RTP payload size (@option{ps}) is specified, that is used.
+
+@item stats (@emph{stats})
+Set the file name for multi-pass stats.
+
+@item nal-hrd (@emph{nal-hrd})
+Set signal HRD information (requires @option{vbv-bufsize} to be set).
+Possible values:
+
+@table @samp
+@item none (@emph{none})
+Disable HRD information signaling.
+@item vbr (@emph{vbr})
+Variable bit rate.
+@item cbr (@emph{cbr})
+Constant bit rate (not allowed in MP4 container).
+@end table
+
+@item x264opts (N.A.)
+Set any x264 option, see @command{x264 --fullhelp} for a list.
+
+Argument is a list of @var{key}=@var{value} couples separated by
 ":". In @var{filter} and @var{psy-rd} options that use ":" as a separator
 themselves, use "," instead. They accept it as well since long ago but this
 is kept undocumented for some reason.
@@ -764,17 +1266,135 @@ For example to specify libx264 encoding options with @command{ffmpeg}:
 ffmpeg -i foo.mpg -vcodec libx264 -x264opts keyint=123:min-keyint=20 -an out.mkv
 @end example
 
-For more information about libx264 and the supported options see:
-@url{http://www.videolan.org/developers/x264.html}
+@item x264-params (N.A.)
+Override the x264 configuration using a :-separated list of key=value
+parameters.
 
-@item -x264-params @var{string}
-Override the x264 configuration using a :-separated list of key=value parameters.
+This option is functionally the same as the @option{x264opts}, but is
+duplicated for compability with the Libav fork.
+
+For example to specify libx264 encoding options with @command{ffmpeg}:
 @example
--x264-params level=30:bframes=0:weightp=0:cabac=0:ref=1:vbv-maxrate=768:vbv-bufsize=2000:analyse=all:me=umh:no-fast-pskip=1:subq=6:8x8dct=0:trellis=0
+ffmpeg -i INPUT -c:v libx264 -x264-params level=30:bframes=0:weightp=0:\
+cabac=0:ref=1:vbv-maxrate=768:vbv-bufsize=2000:analyse=all:me=umh:\
+no-fast-pskip=1:subq=6:8x8dct=0:trellis=0 OUTPUT
 @end example
 @end table
 
-Encoding avpresets for common usages are provided so they can be used with the
-general presets system (e.g. passing the @code{-pre} option).
+Encoding ffpresets for common usages are provided so they can be used with the
+general presets system (e.g. passing the @option{pre} option).
+
+@section libxvid
+
+Xvid MPEG-4 Part 2 encoder wrapper.
+
+This encoder requires the presence of the libxvidcore headers and library
+during configuration. You need to explicitly configure the build with
+@code{--enable-libxvid --enable-gpl}.
+
+The native @code{mpeg4} encoder supports the MPEG-4 Part 2 format, so
+users can encode to this format without this library.
+
+@subsection Options
+
+The following options are supported by the libxvid wrapper. Some of
+the following options are listed but are not documented, and
+correspond to shared codec options. See @ref{codec-options,,the Codec
+Options chapter} for their documentation. The other shared options
+which are not listed have no effect for the libxvid encoder.
+
+@table @option
+@item b
+
+@item g
+
+@item qmin
+
+@item qmax
+
+@item mpeg_quant
+
+@item threads
+
+@item bf
+
+@item b_qfactor
+
+@item b_qoffset
+
+@item flags
+Set specific encoding flags. Possible values:
+
+@table @samp
+
+@item mv4
+Use four motion vector by macroblock.
+
+@item aic
+Enable high quality AC prediction.
+
+@item gray
+Only encode grayscale.
+
+@item gmc
+Enable the use of global motion compensation (GMC).
+
+@item qpel
+Enable quarter-pixel motion compensation.
+
+@item cgop
+Enable closed GOP.
+
+@item global_header
+Place global headers in extradata instead of every keyframe.
+
+@end table
+
+@item trellis
+
+@item me_method
+Set motion estimation method. Possible values in decreasing order of
+speed and increasing order of quality:
+
+@table @samp
+@item zero
+Use no motion estimation (default).
+
+@item phods
+@item x1
+@item log
+Enable advanced diamond zonal search for 16x16 blocks and half-pixel
+refinement for 16x16 blocks. @samp{x1} and @samp{log} are aliases for
+@samp{phods}.
+
+@item epzs
+Enable all of the things described above, plus advanced diamond zonal
+search for 8x8 blocks, half-pixel refinement for 8x8 blocks, and motion
+estimation on chroma planes.
+
+@item full
+Enable all of the things described above, plus extended 16x16 and 8x8
+blocks search.
+@end table
+
+@item mbd
+Set macroblock decision algorithm. Possible values in the increasing
+order of quality:
+
+@table @samp
+@item simple
+Use macroblock comparing function algorithm (default).
+
+@item bits
+Enable rate distortion-based half pixel and quarter pixel refinement for
+16x16 blocks.
+
+@item rd
+Enable all of the things described above, plus rate distortion-based
+half pixel and quarter pixel refinement for 8x8 blocks, and rate
+distortion-based search using square pattern.
+@end table
+
+@end table
 
 @c man end VIDEO ENCODERS

doc/ffmpeg-codecs.texi

@@ -17,6 +17,7 @@ the libavcodec library.
 
 @c man end DESCRIPTION
 
+@anchor{codec-options}
 @chapter Codec Options
 @c man begin CODEC OPTIONS
 

doc/ffmpeg-formats.texi

@@ -76,6 +76,9 @@ Enable RTP MP4A-LATM payload.
 Reduce the latency introduced by optional buffering
 @end table
 
+@item seek2any @var{integer} (@emph{input})
+Forces seeking to enable seek to any mode if set to 1. Default is 0.
+
 @item analyzeduration @var{integer} (@emph{input})
 Specify how many microseconds are analyzed to probe the input. A
 higher value will allow to detect more accurate information, but will
@@ -142,6 +145,12 @@ Use wallclock as timestamps.
 @item avoid_negative_ts @var{integer} (@emph{output})
 Shift timestamps to make them positive. 1 enables, 0 disables, default
 of -1 enables when required by target format.
+
+@item skip_initial_bytes @var{integer} (@emph{input})
+Set number initial bytes to skip. Default is 0.
+
+@item correct_ts_overflow @var{integer} (@emph{input})
+Correct single timestamp overflows if set to 1. Default is 1.
 @end table
 
 @c man end FORMAT OPTIONS

doc/filters.texi

@@ -3,10 +3,10 @@
 
 Filtering in FFmpeg is enabled through the libavfilter library.
 
-In libavfilter, it is possible for filters to have multiple inputs and
-multiple outputs.
-To illustrate the sorts of things that are possible, we can
-use a complex filter graph. For example, the following one:
+In libavfilter, a filter can have multiple inputs and multiple
+outputs.
+To illustrate the sorts of things that are possible, we consider the
+following filtergraph.
 
 @example
 input --> split ---------------------> overlay --> output
@@ -15,25 +15,32 @@ input --> split ---------------------> overlay --> output
             +-----> crop --> vflip -------+
 @end example
 
-splits the stream in two streams, sends one stream through the crop filter
-and the vflip filter before merging it back with the other stream by
-overlaying it on top. You can use the following command to achieve this:
+This filtergraph splits the input stream in two streams, sends one
+stream through the crop filter and the vflip filter before merging it
+back with the other stream by overlaying it on top. You can use the
+following command to achieve this:
 
 @example
-ffmpeg -i input -vf "[in] split [T1], [T2] overlay=0:H/2 [out]; [T1] crop=iw:ih/2:0:ih/2, vflip [T2]" output
+ffmpeg -i INPUT -vf "split [main][tmp]; [tmp] crop=iw:ih/2:0:0, vflip [flip]; [main][flip] overlay=0:H/2" OUTPUT
 @end example
 
 The result will be that in output the top half of the video is mirrored
 onto the bottom half.
 
-Filters are loaded using the @var{-vf} or @var{-af} option passed to
-@command{ffmpeg} or to @command{ffplay}. Filters in the same linear
-chain are separated by commas. In our example, @var{split,
-overlay} are in one linear chain, and @var{crop, vflip} are in
-another. The points where the linear chains join are labeled by names
-enclosed in square brackets. In our example, that is @var{[T1]} and
-@var{[T2]}. The special labels @var{[in]} and @var{[out]} are the points
-where video is input and output.
+Filters in the same linear chain are separated by commas, and distinct
+linear chains of filters are separated by semicolons. In our example,
+@var{crop,vflip} are in one linear chain, @var{split} and
+@var{overlay} are separately in another. The points where the linear
+chains join are labelled by names enclosed in square brackets. In the
+example, the split filter generates two outputs that are associated to
+the labels @var{[main]} and @var{[tmp]}.
+
+The stream sent to the second output of @var{split}, labelled as
+@var{[tmp]}, is processed through the @var{crop} filter, which crops
+away the lower half part of the video, and then vertically flipped. The
+@var{overlay} filter takes in input the first unchanged output of the
+split filter (which was labelled as @var{[main]}), and overlay on its
+lower half the output generated by the @var{crop,vflip} filterchain.
 
 Some filters take in input a list of parameters: they are specified
 after the filter name and an equal sign, and are separated from each other
@@ -2030,7 +2037,7 @@ This expression is evaluated only once during the filter
 configuration.
 
 @item h, out_h
-Set the crop area width. It defaults to @code{ih}.
+Set the crop area height. It defaults to @code{ih}.
 This expression is evaluated only once during the filter
 configuration.
 

doc/general.texi

@@ -24,7 +24,7 @@ instructions.  To enable using OpenJPEG in FFmpeg, pass @code{--enable-libopenjp
 @file{./configure}.
 
 
-@section OpenCORE and VisualOn libraries
+@section OpenCORE, VisualOn, and Fraunhofer libraries
 
 Spun off Google Android sources, OpenCore, VisualOn and Fraunhofer
 libraries provide encoders for a number of audio codecs.
@@ -32,9 +32,14 @@ libraries provide encoders for a number of audio codecs.
 @float NOTE
 OpenCORE and VisualOn libraries are under the Apache License 2.0
 (see @url{http://www.apache.org/licenses/LICENSE-2.0} for details), which is
-incompatible with the LGPL version 2.1 and GPL version 2. You have to
+incompatible to the LGPL version 2.1 and GPL version 2. You have to
 upgrade FFmpeg's license to LGPL version 3 (or if you have enabled
-GPL components, GPL version 3) to use it.
+GPL components, GPL version 3) by passing @code{--enable-version3} to configure in
+order to use it.
+
+The Fraunhofer AAC library is licensed under a license incompatible to the GPL
+and is not known to be compatible to the LGPL. Therefore, you have to pass
+@code{--enable-nonfree} to configure to use it.
 @end float
 
 @subsection OpenCORE AMR

doc/muxers.texi

@@ -18,6 +18,23 @@ enabled muxers.
 
 A description of some of the currently available muxers follows.
 
+@anchor{aiff}
+@section aiff
+
+Audio Interchange File Format muxer.
+
+It accepts the following options:
+
+@table @option
+@item write_id3v2
+Enable ID3v2 tags writing when set to 1. Default is 0 (disabled).
+
+@item id3v2_version
+Select ID3v2 version to write. Currently only version 3 and 4 (aka.
+ID3v2.3 and ID3v2.4) are supported. The default is version 4.
+
+@end table
+
 @anchor{crc}
 @section crc
 

libavcodec/dsputil.c

@@ -1897,7 +1897,7 @@ void ff_set_cmp(DSPContext* c, me_cmp_func *cmp, int type){
 
 static void add_bytes_c(uint8_t *dst, uint8_t *src, int w){
     long i;
-    for(i=0; i<=w-sizeof(long); i+=sizeof(long)){
+    for(i=0; i<=w-(int)sizeof(long); i+=sizeof(long)){
         long a = *(long*)(src+i);
         long b = *(long*)(dst+i);
         *(long*)(dst+i) = ((a&pb_7f) + (b&pb_7f)) ^ ((a^b)&pb_80);
@@ -1922,7 +1922,7 @@ static void diff_bytes_c(uint8_t *dst, const uint8_t *src1, const uint8_t *src2,
         }
     }else
 #endif
-    for(i=0; i<=w-sizeof(long); i+=sizeof(long)){
+    for(i=0; i<=w-(int)sizeof(long); i+=sizeof(long)){
         long a = *(long*)(src1+i);
         long b = *(long*)(src2+i);
         *(long*)(dst+i) = ((a|pb_80) - (b&pb_7f)) ^ ((a^b^pb_80)&pb_80);

libavcodec/ffv1dec.c

@@ -446,6 +446,10 @@ static int read_extra_header(FFV1Context *f)
     ff_build_rac_states(c, 0.05 * (1LL << 32), 256 - 8);
 
     f->version = get_symbol(c, state, 0);
+    if (f->version < 2) {
+        av_log(f->avctx, AV_LOG_ERROR, "Invalid version in global header\n");
+        return AVERROR_INVALIDDATA;
+    }
     if (f->version > 2) {
         c->bytestream_end -= 4;
         f->minor_version = get_symbol(c, state, 0);
@@ -523,6 +527,7 @@ static int read_header(FFV1Context *f)
     memset(state, 128, sizeof(state));
 
     if (f->version < 2) {
+        int chroma_planes, chroma_h_shift, chroma_v_shift, transparency, colorspace, bits_per_raw_sample;
         unsigned v= get_symbol(c, state, 0);
         if (v >= 2) {
             av_log(f->avctx, AV_LOG_ERROR, "invalid version %d in ver01 header\n", v);
@@ -535,15 +540,32 @@ static int read_header(FFV1Context *f)
                 f->state_transition[i] = get_symbol(c, state, 1) + c->one_state[i];
         }
 
-        f->colorspace = get_symbol(c, state, 0); //YUV cs type
+        colorspace     = get_symbol(c, state, 0); //YUV cs type
+        bits_per_raw_sample = f->version > 0 ? get_symbol(c, state, 0) : f->avctx->bits_per_raw_sample;
+        chroma_planes  = get_rac(c, state);
+        chroma_h_shift = get_symbol(c, state, 0);
+        chroma_v_shift = get_symbol(c, state, 0);
+        transparency   = get_rac(c, state);
 
-        if (f->version > 0)
-            f->avctx->bits_per_raw_sample = get_symbol(c, state, 0);
+        if (f->plane_count) {
+            if (   colorspace    != f->colorspace
+                || bits_per_raw_sample != f->avctx->bits_per_raw_sample
+                || chroma_planes != f->chroma_planes
+                || chroma_h_shift!= f->chroma_h_shift
+                || chroma_v_shift!= f->chroma_v_shift
+                || transparency  != f->transparency) {
+                av_log(f->avctx, AV_LOG_ERROR, "Invalid change of global parameters\n");
+                return AVERROR_INVALIDDATA;
+            }
+        }
+
+        f->colorspace     = colorspace;
+        f->avctx->bits_per_raw_sample = bits_per_raw_sample;
+        f->chroma_planes  = chroma_planes;
+        f->chroma_h_shift = chroma_h_shift;
+        f->chroma_v_shift = chroma_v_shift;
+        f->transparency   = transparency;
 
-        f->chroma_planes  = get_rac(c, state);
-        f->chroma_h_shift = get_symbol(c, state, 0);
-        f->chroma_v_shift = get_symbol(c, state, 0);
-        f->transparency   = get_rac(c, state);
         f->plane_count    = 2 + f->transparency;
     }
 

libavcodec/ffv1enc.c

@@ -274,7 +274,7 @@ static av_always_inline int encode_line(FFV1Context *s, int w,
     int run_mode  = 0;
 
     if (s->ac) {
-        if (c->bytestream_end - c->bytestream < w * 20) {
+        if (c->bytestream_end - c->bytestream < w * 35) {
             av_log(s->avctx, AV_LOG_ERROR, "encoded frame too large\n");
             return AVERROR_INVALIDDATA;
         }

libavcodec/flashsv.c

@@ -394,6 +394,10 @@ static int flashsv_decode_frame(AVCodecContext *avctx, void *data,
                     }
                     s->diff_start  = get_bits(&gb, 8);
                     s->diff_height = get_bits(&gb, 8);
+                    if (s->diff_start + s->diff_height > cur_blk_height) {
+                        av_log(avctx, AV_LOG_ERROR, "Block parameters invalid\n");
+                        return AVERROR_INVALIDDATA;
+                    }
                     av_log(avctx, AV_LOG_DEBUG,
                            "%dx%d diff start %d height %d\n",
                            i, j, s->diff_start, s->diff_height);

libavcodec/h264.c

@@ -3775,6 +3775,7 @@ static int decode_slice_header(H264Context *h, H264Context *h0)
 
     if (h->ref_count[0]) h->er.last_pic = &h->ref_list[0][0];
     if (h->ref_count[1]) h->er.next_pic = &h->ref_list[1][0];
+    h->er.ref_count = h->ref_count[0];
 
     if (h->avctx->debug & FF_DEBUG_PICT_INFO) {
         av_log(h->avctx, AV_LOG_DEBUG,
@@ -4166,7 +4167,6 @@ static void er_add_slice(H264Context *h, int startx, int starty,
     if (CONFIG_ERROR_RESILIENCE) {
         ERContext *er = &h->er;
 
-        er->ref_count = h->ref_count[0];
         ff_er_add_slice(er, startx, starty, endx, endy, status);
     }
 }

libavcodec/j2kdec.c

@@ -31,6 +31,7 @@
 #include "bytestream.h"
 #include "internal.h"
 #include "j2k.h"
+#include "libavutil/avassert.h"
 #include "libavutil/common.h"
 
 #define JP2_SIG_TYPE    0x6A502020
@@ -302,6 +303,10 @@ static int get_cox(J2kDecoderContext *s, J2kCodingStyle *c)
      c->log2_cblk_width = bytestream2_get_byteu(&s->g) + 2; // cblk width
     c->log2_cblk_height = bytestream2_get_byteu(&s->g) + 2; // cblk height
 
+    if (c->log2_cblk_width > 6 || c->log2_cblk_height > 6) {
+        return AVERROR_PATCHWELCOME;
+    }
+
     c->cblk_style = bytestream2_get_byteu(&s->g);
     if (c->cblk_style != 0){ // cblk style
         av_log(s->avctx, AV_LOG_WARNING, "extra cblk styles %X\n", c->cblk_style);
@@ -719,6 +724,9 @@ static int decode_cblk(J2kDecoderContext *s, J2kCodingStyle *codsty, J2kT1Contex
     int bpass_csty_symbol = J2K_CBLK_BYPASS & codsty->cblk_style;
     int vert_causal_ctx_csty_symbol = J2K_CBLK_VSC & codsty->cblk_style;
 
+    av_assert0(width  <= J2K_MAX_CBLKW);
+    av_assert0(height <= J2K_MAX_CBLKH);
+
     for (y = 0; y < height+2; y++)
         memset(t1->flags[y], 0, (width+2)*sizeof(int));
 

libavcodec/kmvc.c

@@ -107,7 +107,7 @@ static int kmvc_decode_intra_8x8(KmvcContext * ctx, int w, int h)
                             val = bytestream2_get_byte(&ctx->g);
                             mx = val & 0xF;
                             my = val >> 4;
-                            if ((l0x-mx) + 320*(l0y-my) < 0 || (l0x-mx) + 320*(l0y-my) > 316*196) {
+                            if ((l0x-mx) + 320*(l0y-my) < 0 || (l0x-mx) + 320*(l0y-my) > 320*197 - 4) {
                                 av_log(ctx->avctx, AV_LOG_ERROR, "Invalid MV\n");
                                 return AVERROR_INVALIDDATA;
                             }
@@ -132,7 +132,7 @@ static int kmvc_decode_intra_8x8(KmvcContext * ctx, int w, int h)
                                     val = bytestream2_get_byte(&ctx->g);
                                     mx = val & 0xF;
                                     my = val >> 4;
-                                    if ((l1x-mx) + 320*(l1y-my) < 0 || (l1x-mx) + 320*(l1y-my) > 318*198) {
+                                    if ((l1x-mx) + 320*(l1y-my) < 0 || (l1x-mx) + 320*(l1y-my) > 320*199 - 2) {
                                         av_log(ctx->avctx, AV_LOG_ERROR, "Invalid MV\n");
                                         return AVERROR_INVALIDDATA;
                                     }
@@ -207,7 +207,7 @@ static int kmvc_decode_inter_8x8(KmvcContext * ctx, int w, int h)
                             val = bytestream2_get_byte(&ctx->g);
                             mx = (val & 0xF) - 8;
                             my = (val >> 4) - 8;
-                            if ((l0x+mx) + 320*(l0y+my) < 0 || (l0x+mx) + 320*(l0y+my) > 318*198) {
+                            if ((l0x+mx) + 320*(l0y+my) < 0 || (l0x+mx) + 320*(l0y+my) > 320*197 - 4) {
                                 av_log(ctx->avctx, AV_LOG_ERROR, "Invalid MV\n");
                                 return AVERROR_INVALIDDATA;
                             }
@@ -232,7 +232,7 @@ static int kmvc_decode_inter_8x8(KmvcContext * ctx, int w, int h)
                                     val = bytestream2_get_byte(&ctx->g);
                                     mx = (val & 0xF) - 8;
                                     my = (val >> 4) - 8;
-                                    if ((l1x+mx) + 320*(l1y+my) < 0 || (l1x+mx) + 320*(l1y+my) > 318*198) {
+                                    if ((l1x+mx) + 320*(l1y+my) < 0 || (l1x+mx) + 320*(l1y+my) > 320*199 - 2) {
                                         av_log(ctx->avctx, AV_LOG_ERROR, "Invalid MV\n");
                                         return AVERROR_INVALIDDATA;
                                     }

libavcodec/mjpegdec.c

@@ -774,6 +774,12 @@ static int ljpeg_decode_rgb_scan(MJpegDecodeContext *s, int nb_components, int p
     int resync_mb_y = 0;
     int resync_mb_x = 0;
 
+    if (s->nb_components != 3 && s->nb_components != 4)
+        return AVERROR_INVALIDDATA;
+    if (s->v_max != 1 || s->h_max != 1 || !s->lossless)
+        return AVERROR_INVALIDDATA;
+
+
     s->restart_count = s->restart_interval;
 
     av_fast_malloc(&s->ljpeg_buffer, &s->ljpeg_buffer_size,

libavcodec/parser.c

@@ -235,8 +235,10 @@ int ff_combine_frame(ParseContext *pc, int next, const uint8_t **buf, int *buf_s
     if(next == END_NOT_FOUND){
         void* new_buffer = av_fast_realloc(pc->buffer, &pc->buffer_size, (*buf_size) + pc->index + FF_INPUT_BUFFER_PADDING_SIZE);
 
-        if(!new_buffer)
+        if(!new_buffer) {
+            pc->index = 0;
             return AVERROR(ENOMEM);
+        }
         pc->buffer = new_buffer;
         memcpy(&pc->buffer[pc->index], *buf, *buf_size);
         pc->index += *buf_size;
@@ -249,9 +251,11 @@ int ff_combine_frame(ParseContext *pc, int next, const uint8_t **buf, int *buf_s
     /* append to buffer */
     if(pc->index){
         void* new_buffer = av_fast_realloc(pc->buffer, &pc->buffer_size, next + pc->index + FF_INPUT_BUFFER_PADDING_SIZE);
-
-        if(!new_buffer)
+        if(!new_buffer) {
+            pc->overread_index =
+            pc->index = 0;
             return AVERROR(ENOMEM);
+        }
         pc->buffer = new_buffer;
         if (next > -FF_INPUT_BUFFER_PADDING_SIZE)
             memcpy(&pc->buffer[pc->index], *buf,

libavcodec/pngdsp.c

@@ -30,7 +30,7 @@
 static void add_bytes_l2_c(uint8_t *dst, uint8_t *src1, uint8_t *src2, int w)
 {
     long i;
-    for (i = 0; i <= w - sizeof(long); i += sizeof(long)) {
+    for (i = 0; i <= w - (int)sizeof(long); i += sizeof(long)) {
         long a = *(long *)(src1 + i);
         long b = *(long *)(src2 + i);
         *(long *)(dst + i) = ((a & pb_7f) + (b & pb_7f)) ^ ((a ^ b) & pb_80);

libavcodec/pnm.c

@@ -163,6 +163,8 @@ int ff_pnm_decode_header(AVCodecContext *avctx, PNMContext * const s)
         if (s->maxval >= 256) {
             if (avctx->pix_fmt == AV_PIX_FMT_GRAY8) {
                 avctx->pix_fmt = AV_PIX_FMT_GRAY16BE;
+                if (s->maxval != 65535)
+                    avctx->pix_fmt = AV_PIX_FMT_GRAY16;
             } else if (avctx->pix_fmt == AV_PIX_FMT_RGB24) {
                 avctx->pix_fmt = AV_PIX_FMT_RGB48BE;
             } else if (avctx->pix_fmt == AV_PIX_FMT_YUV420P && s->maxval < 65536) {

libavcodec/rpza.c

@@ -84,7 +84,7 @@ static void rpza_decode_stream(RpzaContext *s)
     unsigned short *pixels = (unsigned short *)s->frame.data[0];
 
     int row_ptr = 0;
-    int pixel_ptr = 0;
+    int pixel_ptr = -4;
     int block_ptr;
     int pixel_x, pixel_y;
     int total_blocks;
@@ -140,6 +140,7 @@ static void rpza_decode_stream(RpzaContext *s)
             colorA = AV_RB16 (&s->buf[stream_ptr]);
             stream_ptr += 2;
             while (n_blocks--) {
+                ADVANCE_BLOCK()
                 block_ptr = row_ptr + pixel_ptr;
                 for (pixel_y = 0; pixel_y < 4; pixel_y++) {
                     for (pixel_x = 0; pixel_x < 4; pixel_x++){
@@ -148,7 +149,6 @@ static void rpza_decode_stream(RpzaContext *s)
                     }
                     block_ptr += row_inc;
                 }
-                ADVANCE_BLOCK();
             }
             break;
 
@@ -187,6 +187,7 @@ static void rpza_decode_stream(RpzaContext *s)
             if (s->size - stream_ptr < n_blocks * 4)
                 return;
             while (n_blocks--) {
+                ADVANCE_BLOCK();
                 block_ptr = row_ptr + pixel_ptr;
                 for (pixel_y = 0; pixel_y < 4; pixel_y++) {
                     index = s->buf[stream_ptr++];
@@ -197,7 +198,6 @@ static void rpza_decode_stream(RpzaContext *s)
                     }
                     block_ptr += row_inc;
                 }
-                ADVANCE_BLOCK();
             }
             break;
 
@@ -205,6 +205,7 @@ static void rpza_decode_stream(RpzaContext *s)
         case 0x00:
             if (s->size - stream_ptr < 16)
                 return;
+            ADVANCE_BLOCK();
             block_ptr = row_ptr + pixel_ptr;
             for (pixel_y = 0; pixel_y < 4; pixel_y++) {
                 for (pixel_x = 0; pixel_x < 4; pixel_x++){
@@ -218,7 +219,6 @@ static void rpza_decode_stream(RpzaContext *s)
                 }
                 block_ptr += row_inc;
             }
-            ADVANCE_BLOCK();
             break;
 
         /* Unknown opcode */

libavcodec/srtdec.c

@@ -204,7 +204,8 @@ static const char *read_ts(const char *buf, int *ts_start, int *ts_end,
                        "%*[ ]X1:%u X2:%u Y1:%u Y2:%u",
                        &hs, &ms, &ss, ts_start, &he, &me, &se, ts_end,
                        x1, x2, y1, y2);
-        buf += strcspn(buf, "\n") + 1;
+        buf += strcspn(buf, "\n");
+        buf += !!*buf;
         if (c >= 8) {
             *ts_start = 100*(ss + 60*(ms + 60*hs)) + *ts_start/10;
             *ts_end   = 100*(se + 60*(me + 60*he)) + *ts_end  /10;

libavcodec/truemotion2.c

@@ -948,14 +948,14 @@ static av_cold int decode_init(AVCodecContext *avctx)
     if (!l->Y1_base || !l->Y2_base || !l->U1_base ||
         !l->V1_base || !l->U2_base || !l->V2_base ||
         !l->last    || !l->clast) {
-        av_freep(l->Y1_base);
-        av_freep(l->Y2_base);
-        av_freep(l->U1_base);
-        av_freep(l->U2_base);
-        av_freep(l->V1_base);
-        av_freep(l->V2_base);
-        av_freep(l->last);
-        av_freep(l->clast);
+        av_freep(&l->Y1_base);
+        av_freep(&l->Y2_base);
+        av_freep(&l->U1_base);
+        av_freep(&l->U2_base);
+        av_freep(&l->V1_base);
+        av_freep(&l->V2_base);
+        av_freep(&l->last);
+        av_freep(&l->clast);
         return AVERROR(ENOMEM);
     }
     l->Y1 = l->Y1_base + l->y_stride  * 4 + 4;

libavcodec/wmadec.c

@@ -506,6 +506,10 @@ static int wma_decode_block(WMACodecContext *s)
        coef escape coding */
     total_gain = 1;
     for(;;) {
+        if (get_bits_left(&s->gb) < 7) {
+            av_log(s->avctx, AV_LOG_ERROR, "total_gain overread\n");
+            return AVERROR_INVALIDDATA;
+        }
         a = get_bits(&s->gb, 7);
         total_gain += a;
         if (a != 127)

libavdevice/v4l2.c

@@ -985,6 +985,9 @@ static int v4l2_read_header(AVFormatContext *s1)
     if (codec_id == AV_CODEC_ID_RAWVIDEO)
         st->codec->codec_tag =
             avcodec_pix_fmt_to_codec_tag(st->codec->pix_fmt);
+    else if (codec_id == AV_CODEC_ID_H264) {
+        st->need_parsing = AVSTREAM_PARSE_HEADERS;
+    }
     if (desired_format == V4L2_PIX_FMT_YVU420)
         st->codec->codec_tag = MKTAG('Y', 'V', '1', '2');
     else if (desired_format == V4L2_PIX_FMT_YVU410)

libavfilter/vf_boxblur.c

@@ -346,13 +346,13 @@ static int filter_frame(AVFilterLink *inlink, AVFilterBufferRef *in)
     }
     avfilter_copy_buffer_ref_props(out, in);
 
-    for (plane = 0; in->data[plane] && plane < 4; plane++)
+    for (plane = 0; plane < 4 && in->data[plane] && in->linesize[plane]; plane++)
         hblur(out->data[plane], out->linesize[plane],
               in ->data[plane], in ->linesize[plane],
               w[plane], h[plane], boxblur->radius[plane], boxblur->power[plane],
               boxblur->temp);
 
-    for (plane = 0; in->data[plane] && plane < 4; plane++)
+    for (plane = 0; plane < 4 && in->data[plane] && in->linesize[plane]; plane++)
         vblur(out->data[plane], out->linesize[plane],
               out->data[plane], out->linesize[plane],
               w[plane], h[plane], boxblur->radius[plane], boxblur->power[plane],

libavfilter/vf_delogo.c

@@ -232,7 +232,7 @@ static int filter_frame(AVFilterLink *inlink, AVFilterBufferRef *in)
         avfilter_copy_buffer_ref_props(out, in);
     }
 
-    for (plane = 0; plane < 4 && in->data[plane]; plane++) {
+    for (plane = 0; plane < 4 && in->data[plane] && in->linesize[plane]; plane++) {
         int hsub = plane == 1 || plane == 2 ? hsub0 : 0;
         int vsub = plane == 1 || plane == 2 ? vsub0 : 0;
 

libavfilter/vf_fieldorder.c

@@ -137,7 +137,7 @@ static int filter_frame(AVFilterLink *inlink, AVFilterBufferRef *frame)
             "picture will move %s one line\n",
             s->dst_tff ? "up" : "down");
     h = frame->video->h;
-    for (plane = 0; plane < 4 && frame->data[plane]; plane++) {
+    for (plane = 0; plane < 4 && frame->data[plane] && frame->linesize[plane]; plane++) {
         line_step = frame->linesize[plane];
         line_size = s->line_size[plane];
         data = frame->data[plane];

libavfilter/vf_fps.c

@@ -203,7 +203,7 @@ static int filter_frame(AVFilterLink *inlink, AVFilterBufferRef *buf)
     }
 
     /* now wait for the next timestamp */
-    if (buf->pts == AV_NOPTS_VALUE) {
+    if (buf->pts == AV_NOPTS_VALUE || av_fifo_size(s->fifo) <= 0) {
         return write_to_fifo(s->fifo, buf);
     }
 

libavfilter/vf_gradfun.c

@@ -216,7 +216,7 @@ static int filter_frame(AVFilterLink *inlink, AVFilterBufferRef *in)
         avfilter_copy_buffer_ref_props(out, in);
     }
 
-    for (p = 0; p < 4 && in->data[p]; p++) {
+    for (p = 0; p < 4 && in->data[p] && in->linesize[p]; p++) {
         int w = inlink->w;
         int h = inlink->h;
         int r = gf->radius;

libavfilter/vf_hflip.c

@@ -90,7 +90,7 @@ static int filter_frame(AVFilterLink *inlink, AVFilterBufferRef *in)
     if (av_pix_fmt_desc_get(inlink->format)->flags & PIX_FMT_PAL)
         memcpy(out->data[1], in->data[1], AVPALETTE_SIZE);
 
-    for (plane = 0; plane < 4 && in->data[plane]; plane++) {
+    for (plane = 0; plane < 4 && in->data[plane] && in->linesize[plane]; plane++) {
         step = flip->max_step[plane];
         hsub = (plane == 1 || plane == 2) ? flip->hsub : 0;
         vsub = (plane == 1 || plane == 2) ? flip->vsub : 0;

libavfilter/vf_kerndeint.c

@@ -162,7 +162,7 @@ static int filter_frame(AVFilterLink *inlink, AVFilterBufferRef *inpic)
     avfilter_copy_buffer_ref_props(outpic, inpic);
     outpic->video->interlaced = 0;
 
-    for (plane = 0; inpic->data[plane] && plane < 4; plane++) {
+    for (plane = 0; plane < 4 && inpic->data[plane] && inpic->linesize[plane]; plane++) {
         h = plane == 0 ? inlink->h : inlink->h >> kerndeint->vsub;
         bwidth = kerndeint->tmp_bwidth[plane];
 

libavfilter/vf_lut.c

@@ -298,7 +298,7 @@ static int filter_frame(AVFilterLink *inlink, AVFilterBufferRef *in)
         }
     } else {
         /* planar */
-        for (plane = 0; plane < 4 && in->data[plane]; plane++) {
+        for (plane = 0; plane < 4 && in->data[plane] && in->linesize[plane]; plane++) {
             int vsub = plane == 1 || plane == 2 ? lut->vsub : 0;
             int hsub = plane == 1 || plane == 2 ? lut->hsub : 0;
 

libavfilter/vf_pad.c

@@ -254,7 +254,7 @@ static AVFilterBufferRef *get_video_buffer(AVFilterLink *inlink, int perms, int
     picref->video->w = w;
     picref->video->h = h;
 
-    for (plane = 0; plane < 4 && picref->data[plane]; plane++)
+    for (plane = 0; plane < 4 && picref->data[plane] && picref->linesize[plane]; plane++)
         picref->data[plane] += FFALIGN(pad->x >> pad->draw.hsub[plane], align) * pad->draw.pixelstep[plane] +
                                       (pad->y >> pad->draw.vsub[plane])        * picref->linesize[plane];
 

libavfilter/vf_showinfo.c

@@ -50,7 +50,7 @@ static int filter_frame(AVFilterLink *inlink, AVFilterBufferRef *frame)
     uint32_t plane_checksum[4] = {0}, checksum = 0;
     int i, plane, vsub = desc->log2_chroma_h;
 
-    for (plane = 0; plane < 4 && frame->data[plane]; plane++) {
+    for (plane = 0; plane < 4 && frame->data[plane] && frame->linesize[plane]; plane++) {
         int64_t linesize = av_image_get_linesize(frame->format, frame->video->w, plane);
         uint8_t *data = frame->data[plane];
         int h = plane == 1 || plane == 2 ? inlink->h >> vsub : inlink->h;
@@ -80,7 +80,7 @@ static int filter_frame(AVFilterLink *inlink, AVFilterBufferRef *frame)
            av_get_picture_type_char(frame->video->pict_type),
            checksum, plane_checksum[0]);
 
-    for (plane = 1; plane < 4 && frame->data[plane]; plane++)
+    for (plane = 1; plane < 4 && frame->data[plane] && frame->linesize[plane]; plane++)
         av_log(ctx, AV_LOG_INFO, " %08X", plane_checksum[plane]);
     av_log(ctx, AV_LOG_INFO, "]\n");
 

libavformat/avidec.c

@@ -1303,7 +1303,7 @@ static int avi_read_idx1(AVFormatContext *s, int size)
         st = s->streams[index];
         ast = st->priv_data;
 
-        if(first_packet && first_packet_pos && len) {
+        if (first_packet && first_packet_pos) {
             data_offset = first_packet_pos - pos;
             first_packet = 0;
         }

libavformat/jacosubdec.c

@@ -63,7 +63,7 @@ static int jacosub_probe(AVProbeData *p)
                 return AVPROBE_SCORE_MAX/2 + 1;
             return 0;
         }
-        ptr += strcspn(ptr, "\n") + 1;
+        ptr += ff_subtitles_next_line(ptr);
     }
     return 0;
 }

libavformat/lxfdec.c

@@ -258,6 +258,7 @@ static int lxf_read_header(AVFormatContext *s)
     st->codec->bit_rate   = 1000000 * ((video_params >> 14) & 0xFF);
     st->codec->codec_tag  = video_params & 0xF;
     st->codec->codec_id   = ff_codec_get_id(lxf_tags, st->codec->codec_tag);
+    st->need_parsing      = AVSTREAM_PARSE_HEADERS;
 
     av_log(s, AV_LOG_DEBUG, "record: %x = %i-%02i-%02i\n",
            record_date, 1900 + (record_date & 0x7F), (record_date >> 7) & 0xF,

libavformat/matroskadec.c

@@ -1689,8 +1689,10 @@ static int matroska_read_header(AVFormatContext *s)
             avio_wl16(&b, 1);
             avio_wl16(&b, track->audio.channels);
             avio_wl16(&b, track->audio.bitdepth);
+            if (track->audio.out_samplerate < 0 || track->audio.out_samplerate > INT_MAX)
+                return AVERROR_INVALIDDATA;
             avio_wl32(&b, track->audio.out_samplerate);
-            avio_wl32(&b, matroska->ctx->duration * track->audio.out_samplerate);
+            avio_wl32(&b, av_rescale((matroska->duration * matroska->time_scale), track->audio.out_samplerate, AV_TIME_BASE * 1000));
         } else if (codec_id == AV_CODEC_ID_RV10 || codec_id == AV_CODEC_ID_RV20 ||
                    codec_id == AV_CODEC_ID_RV30 || codec_id == AV_CODEC_ID_RV40) {
             extradata_offset = 26;
@@ -2457,10 +2459,11 @@ static int matroska_read_seek(AVFormatContext *s, int stream_index,
         if (tracks[i].type == MATROSKA_TRACK_TYPE_SUBTITLE
             && tracks[i].stream->discard != AVDISCARD_ALL) {
             index_sub = av_index_search_timestamp(tracks[i].stream, st->index_entries[index].timestamp, AVSEEK_FLAG_BACKWARD);
-            if (index_sub >= 0
-                && st->index_entries[index_sub].pos < st->index_entries[index_min].pos
-                && st->index_entries[index].timestamp - st->index_entries[index_sub].timestamp < 30000000000/matroska->time_scale)
-                index_min = index_sub;
+            while(index_sub >= 0
+                  && index_min >= 0
+                  && tracks[i].stream->index_entries[index_sub].pos < st->index_entries[index_min].pos
+                  && st->index_entries[index].timestamp - tracks[i].stream->index_entries[index_sub].timestamp < 30000000000/matroska->time_scale)
+                index_min--;
         }
     }
 

libavformat/matroskaenc.c

@@ -27,6 +27,7 @@
 #include "avc.h"
 #include "flacenc.h"
 #include "avlanguage.h"
+#include "subtitles.h"
 #include "libavutil/samplefmt.h"
 #include "libavutil/sha.h"
 #include "libavutil/intreadwrite.h"
@@ -816,6 +817,17 @@ static int mkv_write_tag(AVFormatContext *s, AVDictionary *m, unsigned int eleme
     return 0;
 }
 
+static int mkv_check_tag(AVDictionary *m)
+{
+    AVDictionaryEntry *t = NULL;
+
+    while ((t = av_dict_get(m, "", t, AV_DICT_IGNORE_SUFFIX)))
+        if (av_strcasecmp(t->key, "title") && av_strcasecmp(t->key, "stereo_mode"))
+            return 1;
+
+    return 0;
+}
+
 static int mkv_write_tags(AVFormatContext *s)
 {
     ebml_master tags = {0};
@@ -823,7 +835,7 @@ static int mkv_write_tags(AVFormatContext *s)
 
     ff_metadata_conv_ctx(s, ff_mkv_metadata_conv, NULL);
 
-    if (av_dict_get(s->metadata, "", NULL, AV_DICT_IGNORE_SUFFIX)) {
+    if (mkv_check_tag(s->metadata)) {
         ret = mkv_write_tag(s, s->metadata, 0, 0, &tags);
         if (ret < 0) return ret;
     }
@@ -831,7 +843,7 @@ static int mkv_write_tags(AVFormatContext *s)
     for (i = 0; i < s->nb_streams; i++) {
         AVStream *st = s->streams[i];
 
-        if (!av_dict_get(st->metadata, "", 0, AV_DICT_IGNORE_SUFFIX))
+        if (!mkv_check_tag(st->metadata))
             continue;
 
         ret = mkv_write_tag(s, st->metadata, MATROSKA_ID_TAGTARGETS_TRACKUID, i + 1, &tags);
@@ -841,7 +853,7 @@ static int mkv_write_tags(AVFormatContext *s)
     for (i = 0; i < s->nb_chapters; i++) {
         AVChapter *ch = s->chapters[i];
 
-        if (!av_dict_get(ch->metadata, "", NULL, AV_DICT_IGNORE_SUFFIX))
+        if (!mkv_check_tag(ch->metadata))
             continue;
 
         ret = mkv_write_tag(s, ch->metadata, MATROSKA_ID_TAGTARGETS_CHAPTERUID, ch->id, &tags);
@@ -1168,7 +1180,7 @@ static int srt_get_duration(uint8_t **buf)
             s_hsec += 1000*s_sec;       e_hsec += 1000*e_sec;
             duration = e_hsec - s_hsec;
         }
-        *buf += strcspn(*buf, "\n") + 1;
+        *buf += ff_subtitles_next_line(*buf);
     }
     return duration;
 }
@@ -1403,7 +1415,6 @@ const AVCodecTag additional_audio_tags[] = {
 };
 
 const AVCodecTag additional_video_tags[] = {
-    { AV_CODEC_ID_PRORES,    0xFFFFFFFF },
     { AV_CODEC_ID_RV10,      0xFFFFFFFF },
     { AV_CODEC_ID_RV20,      0xFFFFFFFF },
     { AV_CODEC_ID_RV30,      0xFFFFFFFF },

libavformat/microdvddec.c

@@ -47,7 +47,7 @@ static int microdvd_probe(AVProbeData *p)
             sscanf(ptr, "{%*d}{%*d}%c",  &c) != 1 &&
             sscanf(ptr, "{DEFAULT}{}%c", &c) != 1)
             return 0;
-        ptr += strcspn(ptr, "\n") + 1;
+        ptr += ff_subtitles_next_line(ptr);
     }
     return AVPROBE_SCORE_MAX;
 }

libavformat/movenc.c

@@ -3648,6 +3648,9 @@ static int mov_write_header(AVFormatContext *s)
             }else{
                 track->sample_size = (av_get_bits_per_sample(st->codec->codec_id) >> 3) * st->codec->channels;
             }
+            if (st->codec->codec_id == AV_CODEC_ID_ILBC) {
+                track->audio_vbr = 1;
+            }
             if (track->mode != MODE_MOV &&
                 track->enc->codec_id == AV_CODEC_ID_MP3 && track->timescale < 16000) {
                 av_log(s, AV_LOG_ERROR, "track %d: muxing mp3 at %dhz is not supported\n",

libavformat/mpeg.c

@@ -649,6 +649,7 @@ static int vobsub_read_header(AVFormatContext *s)
             st->id = stream_id;
             st->codec->codec_type = AVMEDIA_TYPE_SUBTITLE;
             st->codec->codec_id   = AV_CODEC_ID_DVD_SUBTITLE;
+            avpriv_set_pts_info(st, 64, 1, 1000);
             av_dict_set(&st->metadata, "language", id, 0);
             av_log(s, AV_LOG_DEBUG, "IDX stream[%d] id=%s\n", stream_id, id);
             header_parsed = 1;
@@ -806,6 +807,21 @@ static int vobsub_read_seek(AVFormatContext *s, int stream_index,
                             int64_t min_ts, int64_t ts, int64_t max_ts, int flags)
 {
     MpegDemuxContext *vobsub = s->priv_data;
+
+    /* Rescale requested timestamps based on the first stream (timebase is the
+     * same for all subtitles stream within a .idx/.sub). Rescaling is done just
+     * like in avformat_seek_file(). */
+    if (stream_index == -1 && s->nb_streams != 1) {
+        AVRational time_base = s->streams[0]->time_base;
+        ts = av_rescale_q(ts, AV_TIME_BASE_Q, time_base);
+        min_ts = av_rescale_rnd(min_ts, time_base.den,
+                                time_base.num * (int64_t)AV_TIME_BASE,
+                                AV_ROUND_UP   | AV_ROUND_PASS_MINMAX);
+        max_ts = av_rescale_rnd(max_ts, time_base.den,
+                                time_base.num * (int64_t)AV_TIME_BASE,
+                                AV_ROUND_DOWN | AV_ROUND_PASS_MINMAX);
+    }
+
     return ff_subtitles_queue_seek(&vobsub->q, s, stream_index,
                                    min_ts, ts, max_ts, flags);
 }

libavformat/mpl2dec.c

@@ -43,7 +43,7 @@ static int mpl2_probe(AVProbeData *p)
         if (sscanf(ptr, "[%"PRId64"][%"PRId64"]%c", &start, &end, &c) != 3 &&
             sscanf(ptr, "[%"PRId64"][]%c",          &start,       &c) != 2)
             return 0;
-        ptr += strcspn(ptr, "\r\n") + 1;
+        ptr += ff_subtitles_next_line(ptr);
         if (ptr >= ptr_end)
             return 0;
     }

libavformat/mpsubdec.c

@@ -37,12 +37,16 @@ static int mpsub_probe(AVProbeData *p)
     const char *ptr_end = p->buf + p->buf_size;
 
     while (ptr < ptr_end) {
+        int inc;
         int n;
 
         if (!memcmp(ptr, "FORMAT=TIME", 11) ||
             sscanf(ptr, "FORMAT=%d", &n) == 1)
             return AVPROBE_SCORE_MAX/2;
-        ptr += strcspn(ptr, "\n") + 1;
+        inc = ff_subtitles_next_line(ptr);
+        if (!inc)
+            break;
+        ptr += inc;
     }
     return 0;
 }

libavformat/mxfenc.c

@@ -76,6 +76,7 @@ typedef struct {
     int temporal_reordering;
     AVRational aspect_ratio; ///< display aspect ratio
     int closed_gop;          ///< gop is closed, used in mpeg-2 frame parsing
+    int video_bit_rate;
 } MXFStreamContext;
 
 typedef struct {
@@ -976,13 +977,14 @@ static void mxf_write_cdci_desc(AVFormatContext *s, AVStream *st)
 static void mxf_write_mpegvideo_desc(AVFormatContext *s, AVStream *st)
 {
     AVIOContext *pb = s->pb;
+    MXFStreamContext *sc = st->priv_data;
     int profile_and_level = (st->codec->profile<<4) | st->codec->level;
 
     mxf_write_cdci_common(s, st, mxf_mpegvideo_descriptor_key, 8+5);
 
     // bit rate
     mxf_write_local_tag(pb, 4, 0x8000);
-    avio_wb32(pb, st->codec->bit_rate);
+    avio_wb32(pb, sc->video_bit_rate);
 
     // profile and level
     mxf_write_local_tag(pb, 1, 0x8007);
@@ -1705,14 +1707,15 @@ static int mxf_write_header(AVFormatContext *s)
                 ret = av_timecode_init(&mxf->tc, rate, 0, 0, s);
             if (ret < 0)
                 return ret;
+            sc->video_bit_rate = st->codec->bit_rate ? st->codec->bit_rate : st->codec->rc_max_rate;
             if (s->oformat == &ff_mxf_d10_muxer) {
-                if (st->codec->bit_rate == 50000000) {
+                if (sc->video_bit_rate == 50000000) {
                     if (mxf->time_base.den == 25) sc->index = 3;
                     else                          sc->index = 5;
-                } else if (st->codec->bit_rate == 40000000) {
+                } else if (sc->video_bit_rate == 40000000) {
                     if (mxf->time_base.den == 25) sc->index = 7;
                     else                          sc->index = 9;
-                } else if (st->codec->bit_rate == 30000000) {
+                } else if (sc->video_bit_rate == 30000000) {
                     if (mxf->time_base.den == 25) sc->index = 11;
                     else                          sc->index = 13;
                 } else {
@@ -1721,7 +1724,7 @@ static int mxf_write_header(AVFormatContext *s)
                 }
 
                 mxf->edit_unit_byte_count = KAG_SIZE; // system element
-                mxf->edit_unit_byte_count += 16 + 4 + (uint64_t)st->codec->bit_rate *
+                mxf->edit_unit_byte_count += 16 + 4 + (uint64_t)sc->video_bit_rate *
                     mxf->time_base.num / (8*mxf->time_base.den);
                 mxf->edit_unit_byte_count += klv_fill_size(mxf->edit_unit_byte_count);
                 mxf->edit_unit_byte_count += 16 + 4 + 4 + spf->samples_per_frame[0]*8*4;
@@ -1855,7 +1858,8 @@ static void mxf_write_d10_video_packet(AVFormatContext *s, AVStream *st, AVPacke
 {
     MXFContext *mxf = s->priv_data;
     AVIOContext *pb = s->pb;
-    int packet_size = (uint64_t)st->codec->bit_rate*mxf->time_base.num /
+    MXFStreamContext *sc = st->priv_data;
+    int packet_size = (uint64_t)sc->video_bit_rate*mxf->time_base.num /
         (8*mxf->time_base.den); // frame size
     int pad;
 

libavformat/paf.c

@@ -233,10 +233,11 @@ static int read_packet(AVFormatContext *s, AVPacket *pkt)
         p->current_frame_block++;
     }
 
-    size = p->video_size - p->frames_offset_table[p->current_frame];
-    if (size < 1)
+    if (p->frames_offset_table[p->current_frame] >= p->video_size)
         return AVERROR_INVALIDDATA;
 
+    size = p->video_size - p->frames_offset_table[p->current_frame];
+
     if (av_new_packet(pkt, size) < 0)
         return AVERROR(ENOMEM);
 

libavformat/srtdec.c

@@ -37,12 +37,14 @@ static int srt_probe(AVProbeData *p)
     if (AV_RB24(ptr) == 0xEFBBBF)
         ptr += 3;  /* skip UTF-8 BOM */
 
+    while (*ptr == '\r' || *ptr == '\n')
+        ptr++;
     for (i=0; i<2; i++) {
         if ((num == i || num + 1 == i)
             && sscanf(ptr, "%*d:%*2d:%*2d%*1[,.]%*3d --> %*d:%*2d:%*2d%*1[,.]%3d", &v) == 1)
             return AVPROBE_SCORE_MAX;
         num = atoi(ptr);
-        ptr += strcspn(ptr, "\n") + 1;
+        ptr += ff_subtitles_next_line(ptr);
     }
     return 0;
 }
@@ -63,10 +65,11 @@ static int64_t get_pts(const char **buf, int *duration,
             int64_t start = (hh1*3600LL + mm1*60LL + ss1) * 1000LL + ms1;
             int64_t end   = (hh2*3600LL + mm2*60LL + ss2) * 1000LL + ms2;
             *duration = end - start;
-            *buf += strcspn(*buf, "\n") + 1;
+            *buf += ff_subtitles_next_line(*buf);
             return start;
         }
-        *buf += strcspn(*buf, "\n") + 1;
+        *buf += ff_subtitles_next_line(*buf);
+
     }
     return AV_NOPTS_VALUE;
 }

libavformat/subtitles.c

@@ -108,7 +108,8 @@ int ff_subtitles_queue_seek(FFDemuxSubtitlesQueue *q, AVFormatContext *s, int st
         for (i = 0; i < q->nb_subs; i++) {
             int64_t pts = q->subs[i].pts;
             uint64_t ts_diff = FFABS(pts - ts);
-            if (pts >= min_ts && pts <= max_ts && ts_diff < min_ts_diff) {
+            if ((stream_index == -1 || q->subs[i].stream_index == stream_index) &&
+                pts >= min_ts && pts <= max_ts && ts_diff < min_ts_diff) {
                 min_ts_diff = ts_diff;
                 idx = i;
             }
@@ -118,13 +119,25 @@ int ff_subtitles_queue_seek(FFDemuxSubtitlesQueue *q, AVFormatContext *s, int st
         /* look back in the latest subtitles for overlapping subtitles */
         ts_selected = q->subs[idx].pts;
         for (i = idx - 1; i >= 0; i--) {
-            if (q->subs[i].duration <= 0)
+            int64_t pts = q->subs[i].pts;
+            if (q->subs[i].duration <= 0 ||
+                (stream_index != -1 && q->subs[i].stream_index != stream_index))
                 continue;
-            if (q->subs[i].pts > ts_selected - q->subs[i].duration)
+            if (pts >= min_ts && pts > ts_selected - q->subs[i].duration)
                 idx = i;
             else
                 break;
         }
+
+        /* If the queue is used to store multiple subtitles streams (like with
+         * VobSub) and the stream index is not specified, we need to make sure
+         * to focus on the smallest file position offset for a same timestamp;
+         * queue is ordered by pts and then filepos, so we can take the first
+         * entry for a given timestamp. */
+        if (stream_index == -1)
+            while (idx > 0 && q->subs[idx - 1].pts == q->subs[idx].pts)
+                idx--;
+
         q->current_sub_idx = idx;
     }
     return 0;

libavformat/subtitles.h

@@ -96,4 +96,17 @@ const char *ff_smil_get_attr_ptr(const char *s, const char *attr);
  */
 void ff_subtitles_read_chunk(AVIOContext *pb, AVBPrint *buf);
 
+/**
+ * Get the number of characters to increment to jump to the next line, or to
+ * the end of the string.
+ */
+static av_always_inline int ff_subtitles_next_line(const char *ptr)
+{
+    int n = strcspn(ptr, "\n");
+    ptr += n;
+    if (*ptr == '\n')
+        n++;
+    return n;
+}
+
 #endif /* AVFORMAT_SUBTITLES_H */

libavformat/wavdec.c

@@ -629,7 +629,7 @@ static int w64_read_header(AVFormatContext *s)
             uint32_t count, chunk_size, i;
 
             start = avio_tell(pb);
-            end = start + size;
+            end = start + FFALIGN(size, INT64_C(8)) - 24;
             count = avio_rl32(pb);
 
             for (i = 0; i < count; i++) {
@@ -655,7 +655,7 @@ static int w64_read_header(AVFormatContext *s)
             avio_skip(pb, end - avio_tell(pb));
         } else {
             av_log(s, AV_LOG_DEBUG, "unknown guid: "FF_PRI_GUID"\n", FF_ARG_GUID(guid));
-            avio_skip(pb, size - 24);
+            avio_skip(pb, FFALIGN(size, INT64_C(8)) - 24);
         }
     }
 

libswresample/rematrix.c

@@ -78,9 +78,6 @@ static int even(int64_t layout){
 }
 
 static int clean_layout(SwrContext *s, int64_t layout){
-    if((layout & AV_CH_LAYOUT_STEREO_DOWNMIX) == AV_CH_LAYOUT_STEREO_DOWNMIX)
-        return AV_CH_LAYOUT_STEREO;
-
     if(layout && layout != AV_CH_FRONT_CENTER && !(layout&(layout-1))) {
         char buf[128];
         av_get_channel_layout_string(buf, sizeof(buf), -1, layout);
@@ -118,13 +115,19 @@ av_cold static int auto_matrix(SwrContext *s)
     const int matrix_encoding = s->matrix_encoding;
 
     in_ch_layout = clean_layout(s, s->in_ch_layout);
+    out_ch_layout = clean_layout(s, s->out_ch_layout);
+
+    if(   out_ch_layout == AV_CH_LAYOUT_STEREO_DOWNMIX
+       && (in_ch_layout & AV_CH_LAYOUT_STEREO_DOWNMIX) == 0
+    )
+        out_ch_layout = AV_CH_LAYOUT_STEREO;
+
     if(!sane_layout(in_ch_layout)){
         av_get_channel_layout_string(buf, sizeof(buf), -1, s->in_ch_layout);
         av_log(s, AV_LOG_ERROR, "Input channel layout '%s' is not supported\n", buf);
         return AVERROR(EINVAL);
     }
 
-    out_ch_layout = clean_layout(s, s->out_ch_layout);
     if(!sane_layout(out_ch_layout)){
         av_get_channel_layout_string(buf, sizeof(buf), -1, s->out_ch_layout);
         av_log(s, AV_LOG_ERROR, "Output channel layout '%s' is not supported\n", buf);

tests/ref/lavf/mkv

@@ -1,6 +1,6 @@
-b53f31e572394f225aff0bc82b5d1cc9 *./tests/data/lavf/lavf.mkv
-472553 ./tests/data/lavf/lavf.mkv
+1748c0b3221977509c62a158236d2492 *./tests/data/lavf/lavf.mkv
+472533 ./tests/data/lavf/lavf.mkv
 ./tests/data/lavf/lavf.mkv CRC=0x4780846b
-84dcb326fe85aeeb5768beb44372f248 *./tests/data/lavf/lavf.mkv
-320297 ./tests/data/lavf/lavf.mkv
+0f78dd9299210a51b18faafc971e71f2 *./tests/data/lavf/lavf.mkv
+320265 ./tests/data/lavf/lavf.mkv
 ./tests/data/lavf/lavf.mkv CRC=0x4780846b

tests/ref/seek/lavf-mkv

@@ -1,48 +1,48 @@
-ret: 0         st: 1 flags:1 dts: 0.000000 pts: 0.000000 pos:    555 size:   208
+ret: 0         st: 1 flags:1 dts: 0.000000 pts: 0.000000 pos:    523 size:   208
 ret: 0         st:-1 flags:0  ts:-1.000000
-ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    771 size: 27837
+ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    739 size: 27837
 ret: 0         st:-1 flags:1  ts: 1.894167
-ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292185 size: 27834
+ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292153 size: 27834
 ret: 0         st: 0 flags:0  ts: 0.788000
-ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292185 size: 27834
+ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292153 size: 27834
 ret: 0         st: 0 flags:1  ts:-0.317000
-ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    771 size: 27837
+ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    739 size: 27837
 ret:-1         st: 1 flags:0  ts: 2.577000
 ret: 0         st: 1 flags:1  ts: 1.471000
-ret: 0         st: 1 flags:1 dts: 0.993000 pts: 0.993000 pos: 320026 size:   209
+ret: 0         st: 1 flags:1 dts: 0.993000 pts: 0.993000 pos: 319994 size:   209
 ret: 0         st:-1 flags:0  ts: 0.365002
-ret: 0         st: 0 flags:1 dts: 0.491000 pts: 0.491000 pos: 146738 size: 27925
+ret: 0         st: 0 flags:1 dts: 0.491000 pts: 0.491000 pos: 146706 size: 27925
 ret: 0         st:-1 flags:1  ts:-0.740831
-ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    771 size: 27837
+ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    739 size: 27837
 ret:-1         st: 0 flags:0  ts: 2.153000
 ret: 0         st: 0 flags:1  ts: 1.048000
-ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292185 size: 27834
+ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292153 size: 27834
 ret: 0         st: 1 flags:0  ts:-0.058000
-ret: 0         st: 1 flags:1 dts: 0.000000 pts: 0.000000 pos:    555 size:   208
+ret: 0         st: 1 flags:1 dts: 0.000000 pts: 0.000000 pos:    523 size:   208
 ret: 0         st: 1 flags:1  ts: 2.836000
-ret: 0         st: 1 flags:1 dts: 0.993000 pts: 0.993000 pos: 320026 size:   209
+ret: 0         st: 1 flags:1 dts: 0.993000 pts: 0.993000 pos: 319994 size:   209
 ret:-1         st:-1 flags:0  ts: 1.730004
 ret: 0         st:-1 flags:1  ts: 0.624171
-ret: 0         st: 0 flags:1 dts: 0.491000 pts: 0.491000 pos: 146738 size: 27925
+ret: 0         st: 0 flags:1 dts: 0.491000 pts: 0.491000 pos: 146706 size: 27925
 ret: 0         st: 0 flags:0  ts:-0.482000
-ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    771 size: 27837
+ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    739 size: 27837
 ret: 0         st: 0 flags:1  ts: 2.413000
-ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292185 size: 27834
+ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292153 size: 27834
 ret:-1         st: 1 flags:0  ts: 1.307000
 ret: 0         st: 1 flags:1  ts: 0.201000
-ret: 0         st: 1 flags:1 dts: 0.000000 pts: 0.000000 pos:    555 size:   208
+ret: 0         st: 1 flags:1 dts: 0.000000 pts: 0.000000 pos:    523 size:   208
 ret: 0         st:-1 flags:0  ts:-0.904994
-ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    771 size: 27837
+ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    739 size: 27837
 ret: 0         st:-1 flags:1  ts: 1.989173
-ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292185 size: 27834
+ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292153 size: 27834
 ret: 0         st: 0 flags:0  ts: 0.883000
-ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292185 size: 27834
+ret: 0         st: 0 flags:1 dts: 0.971000 pts: 0.971000 pos: 292153 size: 27834
 ret: 0         st: 0 flags:1  ts:-0.222000
-ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    771 size: 27837
+ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    739 size: 27837
 ret:-1         st: 1 flags:0  ts: 2.672000
 ret: 0         st: 1 flags:1  ts: 1.566000
-ret: 0         st: 1 flags:1 dts: 0.993000 pts: 0.993000 pos: 320026 size:   209
+ret: 0         st: 1 flags:1 dts: 0.993000 pts: 0.993000 pos: 319994 size:   209
 ret: 0         st:-1 flags:0  ts: 0.460008
-ret: 0         st: 0 flags:1 dts: 0.491000 pts: 0.491000 pos: 146738 size: 27925
+ret: 0         st: 0 flags:1 dts: 0.491000 pts: 0.491000 pos: 146706 size: 27925
 ret: 0         st:-1 flags:1  ts:-0.645825
-ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    771 size: 27837
+ret: 0         st: 0 flags:1 dts: 0.011000 pts: 0.011000 pos:    739 size: 27837