update for 0.5.11

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

.gitignore

@@ -1,31 +1,22 @@
 .config
 .version
 *.o
+*.so
 *.d
 *.exe
 *.ho
 *-example
 *-test
 *_g
-*.def
-*.dll
-*.lib
-*.exp
 config.*
 doc/*.1
 doc/*.html
 doc/*.pod
-doc/fate.txt
 doxy
 ffmpeg
 ffplay
 ffprobe
 ffserver
-avconv
-libavcodec/*_tablegen
-libavcodec/*_tables.c
-libavcodec/*_tables.h
-libavcodec/codec_names.h
 libavcodec/libavcodec*
 libavcore/libavcore*
 libavdevice/libavdevice*
@@ -34,23 +25,22 @@ libavformat/libavformat*
 libavutil/avconfig.h
 libavutil/libavutil*
 libpostproc/libpostproc*
-libswresample/libswresample*
 libswscale/libswscale*
 tests/audiogen
 tests/base64
 tests/data
 tests/rotozoom
+tests/seek_test
 tests/tiny_psnr
 tests/videogen
 tests/vsynth1
 tests/vsynth2
-tools/aviocat
 tools/cws2fws
 tools/graph2dot
-tools/ismindex
 tools/lavfi-showfiltfmts
 tools/pktdumper
 tools/probetest
 tools/qt-faststart
 tools/trasher
+tools/trasher*.d
 version.h

CREDITS

@@ -1,7 +1,5 @@
-This file contains the names of some of the people who have contributed to
-FFmpeg. The names are sorted alphabetically by last name.  As this file is
-currently quite outdated and git serves as a much better tool for determining
-authorship, it remains here for historical reasons only.
+This file contains the name of the people who have contributed to
+FFmpeg. The names are sorted alphabetically by last name.
 
 Dénes Balatoni
 Michel Bardiaux
@@ -9,10 +7,8 @@ Fabrice Bellard
 Patrice Bensoussan
 Alex Beregszaszi
 BERO
-Thilo Borgmann
 Mario Brito
 Ronald Bultje
-Alex Converse
 Maarten Daniels
 Reimar Doeffinger
 Tim Ferguson
@@ -41,7 +37,6 @@ Michael Niedermayer
 François Revol
 Peter Ross
 Måns Rullgård
-Stefano Sabatini
 Roman Shaposhnik
 Oded Shimon
 Dieter Shirley

Changelog

@@ -1,424 +1,158 @@
 Entries are sorted chronologically from oldest to youngest within each release,
 releases are sorted from youngest to oldest.
 
-version next:
+version 0.5.10:
 
-version 0.10.1
-- Several security fixes, many bugfixes affecting many formats and
-  codecs, the list below is not complete.
-
-- swapuv filter
-
-- Several bugs and crashes have been fixed in the following codecs: AAC,
-  AC-3, ADPCM, AMR (both NB and WB), ATRAC3, CAVC, Cook, camstudio, DCA,
-  DPCM, DSI CIN, DV, EA TGQ, FLAC, fraps, G.722 (both encoder and
-  decoder), H.264, huvffyuv, BB JV decoder, Indeo 3, KGV1, LCL, the
-  libx264 wrapper, MJPEG, mp3on4, Musepack, MPEG1/2, PNG, QDM2, Qt RLE,
-  ROQ, RV10, RV30/RV34/RV40, shorten, smacker, subrip, SVQ3, TIFF,
-  Truemotion2, TTA, VC1, VMware Screen codec, Vorbis, VP5, VP6, WMA,
-  Westwood SNDx, XXAN.
-
-- This release additionally updates the following codecs to the
-  bytestream2 API, and therefore benefit from additional overflow
-  checks: XXAN, ALG MM, TQG, SMC, Qt SMC, ROQ, PNG
-
-- Several bugs and crashes have been fixed in the following formats:
-  AIFF, ASF, DV, Matroska, NSV, MOV, MPEG-TS, Smacker, Sony OpenMG, RM,
-  SWF.
-
-- Libswscale has an potential overflow for large image size fixed.
-
-- The following APIs have been added:
-
-  avcodec_is_open()
-  avformat_get_riff_video_tags()
-  avformat_get_riff_audio_tags()
-
-  Please see the file doc/APIchanges and the Doxygen documentation for
-  further information.
+- mpeg12: do not decode extradata more than once (CVE-2012-2803)
+- vp6: properly fail on unsupported feature (CVE-2012-2783)
+- vp56: release frames on error (CVE-2012-2783)
+- shorten: Use separate pointers for the allocated memory for decoded samples (CVE-2012-0858)
+- shorten: check for realloc failure
+- h264: check context state before decoding slice data partitions
+- oggdec: check memory allocation
+- Fix uninitialized reads on malformed Ogg files
+- lavf: avoid integer overflow in ff_compute_frame_duration()
+- yuv4mpeg: reject unsupported codecs
+- tiffenc: Check av_malloc() results
+- mpegaudiodec: fix short_start calculation
+- h264: avoid stuck buffer pointer in decode_nal_units
+- yuv4mpeg: return proper error codes (Bug 373)
+- avidec: return 0, not packet size from read_packet()
+- cavsdec: check for changing w/h (CVE-2012-2777 and CVE-2012-2784)
+- avidec: use actually read size instead of requested size CVE-2012-2788
+- bytestream: add a new set of bytestream functions with overread checking
+- avsdec: Set dimensions instead of relying on the demuxer (CVE-2012-2801)
+- lavfi: avfilter_merge_formats: handle case where inputs are same
+- bmpdec: only initialize palette for pal8 (Bug 367)
+- Bump version number for the 0.5.10 release
+- lavfi: avfilter_merge_formats: handle case where inputs are same
+- mpegvideo: Don't use ff_mspel_motion() for vc1
+- imgconvert: avoid undefined left shift in avcodec_find_best_pix_fmt
+- nuv: check RTjpeg header for validity
+- vc1dec: add flush function for WMV9 and VC-1 decoders
 
 
-version 0.10:
-- Fixes: CVE-2011-3929, CVE-2011-3934, CVE-2011-3935, CVE-2011-3936,
-         CVE-2011-3937, CVE-2011-3940, CVE-2011-3941, CVE-2011-3944,
-         CVE-2011-3945, CVE-2011-3946, CVE-2011-3947, CVE-2011-3949,
-         CVE-2011-3950, CVE-2011-3951, CVE-2011-3952
-- v410 Quicktime Uncompressed 4:4:4 10-bit encoder and decoder
-- SBaGen (SBG) binaural beats script demuxer
-- OpenMG Audio muxer
-- Timecode extraction in DV and MOV
-- thumbnail video filter
-- XML output in ffprobe
-- asplit audio filter
-- tinterlace video filter
-- astreamsync audio filter
-- amerge audio filter
-- ISMV (Smooth Streaming) muxer
-- GSM audio parser
-- SMJPEG muxer
-- XWD encoder and decoder
-- Automatic thread count based on detection number of (available) CPU cores
-- y41p Brooktree Uncompressed 4:1:1 12-bit encoder and decoder
-- ffprobe -show_error option
-- Avid 1:1 10-bit RGB Packer codec
-- v308 Quicktime Uncompressed 4:4:4 encoder and decoder
-- yuv4 libquicktime packed 4:2:0 encoder and decoder
-- ffprobe -show_frames option
-- silencedetect audio filter
-- ffprobe -show_program_version, -show_library_versions, -show_versions options
-- rv34: frame-level multi-threading
-- optimized iMDCT transform on x86 using SSE for for mpegaudiodec
-- Improved PGS subtitle decoder
-- dumpgraph option to lavfi device
-- r210 and r10k encoders
-- ffwavesynth decoder
-- aviocat tool
-- ffeval tool
+version 0.5.9:
+
+- dpcm: ignore extra unpaired bytes in stereo streams (CVE-2011-3951)
+- h264: Add check for invalid chroma_format_idc (CVE-2012-0851)
+- adpcm: ADPCM Electronic Arts has always two channels (CVE-2012-0852)
+- kmvc: Check palsize (CVE-2011-3952)
+- qdm2: clip array indices returned by qdm2_get_vlc()
+- configure: properly check for mingw-w64 through installed headers
+- Replace every usage of -lvfw32 with what is particularly necessary for that case
+- mingw32: properly check if vfw capture is supported by the system headers
+- mingw32: merge checks for mingw-w64 and mingw32-runtime >= 3.15 into one
+- vfwcap: Include windows.h before vfw.h since the latter requires defines from the former
+- ea: check chunk_size for validity
+- eatqi: move "block" variable into context to ensure sufficient alignment for idct_put
+- tqi: Pass errors from the MB decoder
+- png: check bit depth for PAL8/Y400A pixel formats.
 
 
-version 0.9:
+version 0.5.8:
 
-- openal input device added
-- boxblur filter added
-- BWF muxer
-- Flash Screen Video 2 decoder
-- lavfi input device added
-- added avconv, which is almost the same for now, except
-for a few incompatible changes in the options, which will hopefully make them
-easier to use. The changes are:
-    * The options placement is now strictly enforced! While in theory the
-      options for ffmpeg should be given in [input options] -i INPUT [output
-      options] OUTPUT order, in practice it was possible to give output options
-      before the -i and it mostly worked. Except when it didn't - the behavior was
-      a bit inconsistent. In avconv, it is not possible to mix input and output
-      options. All non-global options are reset after an input or output filename.
-    * All per-file options are now truly per-file - they apply only to the next
-      input or output file and specifying different values for different files
-      will now work properly (notably -ss and -t options).
-    * All per-stream options are now truly per-stream - it is possible to
-      specify which stream(s) should a given option apply to. See the Stream
-      specifiers section in the avconv manual for details.
-    * In ffmpeg some options (like -newvideo/-newaudio/...) are irregular in the
-      sense that they're specified after the output filename instead of before,
-      like all other options. In avconv this irregularity is removed, all options
-      apply to the next input or output file.
-    * -newvideo/-newaudio/-newsubtitle options were removed. Not only were they
-      irregular and highly confusing, they were also redundant. In avconv the -map
-      option will create new streams in the output file and map input streams to
-      them. E.g. avconv -i INPUT -map 0 OUTPUT will create an output stream for
-      each stream in the first input file.
-    * The -map option now has slightly different and more powerful syntax:
-        + Colons (':') are used to separate file index/stream type/stream index
-          instead of dots. Comma (',') is used to separate the sync stream instead
-          of colon.. This is done for consistency with other options.
-        + It's possible to specify stream type. E.g. -map 0:a:2 creates an
-          output stream from the third input audio stream.
-        + Omitting the stream index now maps all the streams of the given type,
-          not just the first. E.g. -map 0:s creates output streams for all the
-          subtitle streams in the first input file.
-        + Since -map can now match multiple streams, negative mappings were
-          introduced. Negative mappings disable some streams from an already
-          defined map. E.g. '-map 0 -map -0:a:1' means 'create output streams for
-          all the stream in the first input file, except for the second audio
-          stream'.
-    * There is a new option -c (or -codec) for choosing the decoder/encoder to
-      use, which allows to precisely specify target stream(s) consistently with
-      other options. E.g. -c:v lib264 sets the codec for all video streams, -c:a:0
-      libvorbis sets the codec for the first audio stream and -c copy copies all
-      the streams without reencoding. Old -vcodec/-acodec/-scodec options are now
-      aliases to -c:v/a/s
-    * It is now possible to precisely specify which stream should an AVOption
-      apply to. E.g. -b:v:0 2M sets the bitrate for the first video stream, while
-      -b:a 128k sets the bitrate for all audio streams. Note that the old -ab 128k
-      syntax is deprecated and will stop working soon.
-    * -map_chapters now takes only an input file index and applies to the next
-      output file. This is consistent with how all the other options work.
-    * -map_metadata now takes only an input metadata specifier and applies to
-      the next output file. Output metadata specifier is now part of the option
-      name, similarly to the AVOptions/map/codec feature above.
-    * -metadata can now be used to set metadata on streams and chapters, e.g.
-      -metadata:s:1 language=eng sets the language of the first stream to 'eng'.
-      This made -vlang/-alang/-slang options redundant, so they were removed.
-    * -qscale option now uses stream specifiers and applies to all streams, not
-      just video. I.e. plain -qscale number would now apply to all streams. To get
-      the old behavior, use -qscale:v. Also there is now a shortcut -q for -qscale
-      and -aq is now an alias for -q:a.
-    * -vbsf/-absf/-sbsf options were removed and replaced by a -bsf option which
-      uses stream specifiers. Use -bsf:v/a/s instead of the old options.
-    * -itsscale option now uses stream specifiers, so its argument is only the
-      scale parameter.
-    * -intra option was removed, use -g 0 for the same effect.
-    * -psnr option was removed, use -flags +psnr for the same effect.
-    * -vf option is now an alias to the new -filter option, which uses stream specifiers.
-    * -vframes/-aframes/-dframes options are now aliases to the new -frames option.
-    * -vtag/-atag/-stag options are now aliases to the new -tag option.
-- XMV demuxer
-- LOAS demuxer
-- ashowinfo filter added
-- Windows Media Image decoder
-- amovie source added
-- LATM muxer/demuxer
-- Speex encoder via libspeex
-- JSON output in ffprobe
-- WTV muxer
-- Optional C++ Support (needed for libstagefright)
-- H.264 Decoding on Android via Stagefright
-- Prores decoder
-- BIN/XBIN/ADF/IDF text file decoder
-- aconvert audio filter added
-- audio support to lavfi input device added
-- libcdio-paranoia input device for audio CD grabbing
-- Apple ProRes decoder
-- CELT in Ogg demuxing
-- G.723.1 demuxer and decoder
-- libmodplug support (--enable-libmodplug)
-- VC-1 interlaced decoding
-- libutvideo wrapper (--enable-libutvideo)
-- aevalsrc audio source added
-- Ut Video decoder
-- Speex encoding via libspeex
-- 4:2:2 H.264 decoding support
-- 4:2:2 and 4:4:4 H.264 encoding with libx264
-- Pulseaudio input device
-- Prores encoder
-- Video Decoder Acceleration (VDA) HWAccel module.
-- replacement Indeo 3 decoder
-- new ffmpeg option: -map_channel
-- volume audio filter added
-- earwax audio filter added
-- libv4l2 support (--enable-libv4l2)
-- TLS/SSL and HTTPS protocol support
-- AVOptions API rewritten and documented
-- most of CODEC_FLAG2_*, some CODEC_FLAG_* and many codec-specific fields in
-  AVCodecContext deprecated. Codec private options should be used instead.
-- Properly working defaults in libx264 wrapper, support for native presets.
-- Encrypted OMA files support
-- Discworld II BMV decoding support
-- VBLE Decoder
-- OS X Video Decoder Acceleration (VDA) support
-- compact and csv output in ffprobe
-- pan audio filter
-- IFF Amiga Continuous Bitmap (ACBM) decoder
-- ass filter
-- CRI ADX audio format muxer and demuxer
-- Playstation Portable PMP format demuxer
-- Microsoft Windows ICO demuxer
-- life source
-- PCM format support in OMA demuxer
-- CLJR encoder
-- new option: -report
-- Dxtory capture format decoder
-- cellauto source
-- Simple segmenting muxer
-- Indeo 4 decoder
-- SMJPEG demuxer
+- id3v2: fix skipping extended header in id3v2.4
+- nsvdec: Several bugfixes related to CVE-2011-3940
+- dv: check stype
+- dv: Fix null pointer dereference due to ach=0
+- dv: Fix small stack overread related to CVE-2011-3929 and CVE-2011-3936.
+- atrac3: Fix crash in tonal component decoding, fixes CVE-2012-0853
+- mjpegbdec: Fix overflow in SOS, fixes CVE-2011-3947
+- motionpixels: Clip YUV values after applying a gradient.
+- vqavideo: return error if image size is not a multiple of block size,
+  fixes CVE-2012-0947.
 
 
-version 0.8:
-
-- many many things we forgot because we rather write code than changelogs
-- WebM support in Matroska de/muxer
-- low overhead Ogg muxing
-- MMS-TCP support
-- VP8 de/encoding via libvpx
-- Demuxer for On2's IVF format
-- Pictor/PC Paint decoder
-- HE-AAC v2 decoder
-- HE-AAC v2 encoding with libaacplus
-- libfaad2 wrapper removed
-- DTS-ES extension (XCh) decoding support
-- native VP8 decoder
-- RTSP tunneling over HTTP
-- RTP depacketization of SVQ3
-- -strict inofficial replaced by -strict unofficial
-- ffplay -exitonkeydown and -exitonmousedown options added
-- native GSM / GSM MS decoder
-- RTP depacketization of QDM2
-- ANSI/ASCII art playback system
-- Lego Mindstorms RSO de/muxer
-- libavcore added (and subsequently removed)
-- SubRip subtitle file muxer and demuxer
-- Chinese AVS encoding via libxavs
-- ffprobe -show_packets option added
-- RTP packetization of Theora and Vorbis
-- RTP depacketization of MP4A-LATM
-- RTP packetization and depacketization of VP8
-- hflip filter
-- Apple HTTP Live Streaming demuxer
-- a64 codec
-- MMS-HTTP support
-- G.722 ADPCM audio encoder/decoder
-- R10k video decoder
-- ocv_smooth filter
-- frei0r wrapper filter
-- change crop filter syntax to width:height:x:y
-- make the crop filter accept parametric expressions
-- make ffprobe accept AVFormatContext options
-- yadif filter
-- blackframe filter
-- Demuxer for Leitch/Harris' VR native stream format (LXF)
-- RTP depacketization of the X-QT QuickTime format
-- SAP (Session Announcement Protocol, RFC 2974) muxer and demuxer
-- cropdetect filter
-- ffmpeg -crop* options removed
-- transpose filter added
-- ffmpeg -force_key_frames option added
-- demuxer for receiving raw rtp:// URLs without an SDP description
-- single stream LATM/LOAS decoder
-- setpts filter added
-- Win64 support for optimized x86 assembly functions
-- MJPEG/AVI1 to JPEG/JFIF bitstream filter
-- ASS subtitle encoder and decoder
-- IEC 61937 encapsulation for E-AC-3, TrueHD, DTS-HD (for HDMI passthrough)
-- overlay filter added
-- rename aspect filter to setdar, and pixelaspect to setsar
-- IEC 61937 demuxer
-- Mobotix .mxg demuxer
-- frei0r source added
-- hqdn3d filter added
-- RTP depacketization of QCELP
-- FLAC parser added
-- gradfun filter added
-- AMR-WB decoder
-- replace the ocv_smooth filter with a more generic ocv filter
-- Windows Televison (WTV) demuxer
-- FFmpeg metadata format muxer and demuxer
-- SubRip (srt) subtitle encoder and decoder
-- floating-point AC-3 encoder added
-- Lagarith decoder
-- ffmpeg -copytb option added
-- IVF muxer added
-- Wing Commander IV movies decoder added
-- movie source added
-- Bink version 'b' audio and video decoder
-- Bitmap Brothers JV playback system
-- Apple HTTP Live Streaming protocol handler
-- sndio support for playback and record
-- Linux framebuffer input device added
-- Chronomaster DFA decoder
-- DPX image encoder
-- MicroDVD subtitle file muxer and demuxer
-- Playstation Portable PMP format demuxer
-- fieldorder video filter added
-- AAC encoding via libvo-aacenc
-- AMR-WB encoding via libvo-amrwbenc
-- xWMA demuxer
-- Mobotix MxPEG decoder
-- VP8 frame-multithreading
-- NEON optimizations for VP8
-- Lots of deprecated API cruft removed
-- fft and imdct optimizations for AVX (Sandy Bridge) processors
-- showinfo filter added
-- SMPTE 302M AES3 audio decoder
-- Apple Core Audio Format muxer
-- 9bit and 10bit per sample support in the H.264 decoder
-- 9bit and 10bit FFV1 encoding / decoding
-- split filter added
-- select filter added
-- sdl output device added
-- libmpcodecs video filter support (3 times as many filters than before)
-- mpeg2 aspect ratio dection fixed
-- libxvid aspect pickiness fixed
-- Frame multithreaded decoding
-- E-AC-3 audio encoder
-- ac3enc: add channel coupling support
-- floating-point sample format support to the ac3, eac3, dca, aac, and vorbis decoders.
-- H264/MPEG frame-level multi-threading
-- All av_metadata_* functions renamed to av_dict_* and moved to libavutil
-- 4:4:4 H.264 decoding support
-- 10-bit H.264 optimizations for x86
-- lut, lutrgb, and lutyuv filters added
-- buffersink libavfilter sink added
-- Bump libswscale for recently reported ABI break
-- New J2K encoder (via OpenJPEG)
+version 0.5.7:
+- vorbis: An additional defense in the Vorbis codec. (CVE-2011-3895)
+- vorbisdec: Fix decoding bug with channel handling.
+- matroskadec: Fix a bug where a pointer was cached to an array that might
+  later move due to a realloc(). (CVE-2011-3893)
+- vorbis: Avoid some out-of-bounds reads. (CVE-2011-3893)
+- vp3: fix oob read for negative tokens and memleaks on error, (CVE-2011-3892)
+- vp3: fix streams with non-zero last coefficient.
 
 
-version 0.7:
-
-- all the changes for 0.8, but keeping API/ABI compatibility with the 0.6 release
+version 0.5.6:
+- svq1dec: call avcodec_set_dimensions() after dimensions changed. (NGS00148, CVE-2011-4579)
+- vmd: fix segfaults on corruped streams (CVE-2011-4364)
+- commits related to CVE-2011-4353:
+  - vp6: partially propagate huffman tree building errors during coeff model parsing and fix misspelling
+  - Plug some memory leaks in the VP6 decoder
+  - vp6: Reset the internal state when aborting key frames header parsing
+  - vp6: Fix illegal read.
+  - vp6: Fix illegal read.
+  - Fix out of bound reads in the QDM2 decoder.
+- commits related to CVE-2011-4351:
+  - Check for out of bound writes in the QDM2 decoder.
+  - qdm2: check output buffer size before decoding
+  - Fix qdm2 decoder packet handling to match the api
 
 
-version 0.6:
+version 0.5.5:
 
-- PB-frame decoding for H.263
-- deprecated vhook subsystem removed
-- deprecated old scaler removed
-- VQF demuxer
-- Alpha channel scaler
-- PCX encoder
-- RTP packetization of H.263
-- RTP packetization of AMR
-- RTP depacketization of Vorbis
-- CorePNG decoding support
-- Cook multichannel decoding support
-- introduced avlanguage helpers in libavformat
-- 8088flex TMV demuxer and decoder
-- per-stream language-tags extraction in asfdec
-- V210 decoder and encoder
+- Fix memory (re)allocation in matroskadec.c (MSVR11-011/CVE-2011-3504)
+- Fix some crashes with invalid bitstreams in the CAVS decoder
+  (CVE-2011-3362, CVE-2011-3973, CVE-2011-3974)
+- Compilation fixes for gcc-4.6, testsuite now passes again
+- Detect and handle overreads in the MJPEG decoder.
+- multiple other security fixes.
+
+
+
+version 0.5.4:
+
+- Fix memory corruption in WMV parsing (addresses CVE-2010-3908)
+- Fix heap corruption crashes (addresses CVE-2011-0722)
+- Fix crashes in Vorbis decoding found by zzuf (addresses CVE-2010-4704)
+- Fix another crash in Vorbis decoding (addresses CVE-2011-0480, Chrome issue 68115)
+- Fix invalid reads in VC-1 decoding (related to CVE-2011-0723)
+- Do not attempt to decode APE file with no frames
+  (adresses http://packetstorm.linuxsecurity.com/1103-exploits/vlc105-dos.txt)
+
+
+
+version 0.5.3:
+
+- build system improvements
+- performance fix for seekable HTTP
+- fix several potentially exploitable issues in the FLIC decoder
+  (addresses CVE-2010-3429)
+
+
+
+version 0.5.2:
+
+- Hurd support
+- PowerPC without AltiVec compilation issues
+- validate channels and samplerate in the Vorbis decoder
+
+
+
+version 0.5.1:
+
+- build system updates
+- documentation updates
+- libswscale now is LGPL except for x86 optimizations
+- fix for GPL code in libswscale that was erroneously activated
+- AltiVec code in libswscale is now LGPL
 - remaining GPL parts in AC-3 decoder converted to LGPL
-- QCP demuxer
-- SoX native format muxer and demuxer
+- (L)GPL license upgrade support
 - AMR-NB decoding/encoding, AMR-WB decoding via OpenCORE libraries
-- DPX image decoder
-- Electronic Arts Madcow decoder
-- DivX (XSUB) subtitle encoder
-- nonfree libamr support for AMR-NB/WB decoding/encoding removed
-- experimental AAC encoder
-- RTP depacketization of ASF and RTSP from WMS servers
-- RTMP support in libavformat
-- noX handling for OPT_BOOL X options
-- Wave64 demuxer
-- IEC-61937 compatible Muxer
-- TwinVQ decoder
-- Bluray (PGS) subtitle decoder
-- LPCM support in MPEG-TS (HDMV RID as found on Blu-ray disks)
-- WMA Pro decoder
-- Core Audio Format demuxer
-- Atrac1 decoder
-- MD STUDIO audio demuxer
-- RF64 support in WAV demuxer
-- MPEG-4 Audio Lossless Coding (ALS) decoder
-- -formats option split into -formats, -codecs, -bsfs, and -protocols
-- IV8 demuxer
-- CDG demuxer and decoder
-- R210 decoder
-- Auravision Aura 1 and 2 decoders
-- Deluxe Paint Animation playback system
-- SIPR decoder
-- Adobe Filmstrip muxer and demuxer
-- RTP depacketization of H.263
-- Bink demuxer and audio/video decoders
 - enable symbol versioning by default for linkers that support it
-- IFF PBM/ILBM bitmap decoder
-- concat protocol
-- Indeo 5 decoder
-- RTP depacketization of AMR
-- WMA Voice decoder
-- ffprobe tool
-- AMR-NB decoder
-- RTSP muxer
-- HE-AAC v1 decoder
-- Kega Game Video (KGV1) decoder
-- VorbisComment writing for FLAC, Ogg FLAC and Ogg Speex files
-- RTP depacketization of Theora
-- HTTP Digest authentication
-- RTMP/RTMPT/RTMPS/RTMPE/RTMPTE protocol support via librtmp
-- Psygnosis YOP demuxer and video decoder
-- spectral extension support in the E-AC-3 decoder
-- unsharp video filter
-- RTP hinting in the mov/3gp/mp4 muxer
-- Dirac in Ogg demuxing
-- seek to keyframes in Ogg
-- 4:2:2 and 4:4:4 Theora decoding
-- 35% faster VP3/Theora decoding
-- faster AAC decoding
-- faster H.264 decoding
-- RealAudio 1.0 (14.4K) encoder
+- backport av_lockmgr_register(), see doc/APIchanges for details
+- security fixes for:
+  - ASF, Ogg and MOV demuxers
+  - FFv1, H.264, HuffYUV, MLP, MPEG audio and Snow decoders
+
 
 
 version 0.5:
 
+- The "device" muxers and demuxers are now in a new libavdevice library
 - DV50 AKA DVCPRO50 encoder, decoder, muxer and demuxer
+- DV100 AKA DVCPRO HD decoder and demuxer
 - TechSmith Camtasia (TSCC) video decoder
 - IBM Ultimotion (ULTI) video decoder
 - Sierra Online audio file demuxer and decoder
@@ -438,7 +172,7 @@ version 0.5:
 - Fraps FPS1 video decoder
 - Snow video encoder/decoder
 - Sonic audio encoder/decoder
-- Vorbis audio decoder
+- Vorbis audio encoder/decoder
 - Macromedia ADPCM decoder
 - Duck TrueMotion 2 video decoder
 - support for decoding FLX and DTA extensions in FLIC files
@@ -449,19 +183,18 @@ version 0.5:
 - TrueSpeech audio decoder
 - WMA2 audio decoder fixed, now all files should play correctly
 - RealAudio 14.4 and 28.8 decoders fixed
-- JPEG-LS decoder
+- JPEG-LS encoder and decoder
+- CamStudio video decoder
 - build system improvements
 - tabs and trailing whitespace removed from the codebase
-- CamStudio video decoder
 - AIFF/AIFF-C audio format, encoding and decoding
 - ADTS AAC file reading and writing
 - Creative VOC file reading and writing
 - American Laser Games multimedia (*.mm) playback system
-- Zip Motion Blocks Video decoder
+- Zip Blocks Motion Video decoder and encoder
 - improved Theora/VP3 decoder
 - True Audio (TTA) decoder
 - AVS demuxer and video decoder
-- JPEG-LS encoder
 - Smacker demuxer and decoder
 - NuppelVideo/MythTV demuxer and RTjpeg decoder
 - KMVC decoder
@@ -480,14 +213,12 @@ version 0.5:
 - VP6 video decoder
 - WavPack lossless audio decoder
 - Targa (.TGA) picture decoder
-- Vorbis audio encoder
 - Delphine Software .cin demuxer/audio and video decoder
 - Tiertex .seq demuxer/video decoder
 - MTV demuxer
 - TIFF picture encoder and decoder
 - GIF picture decoder
 - Intel Music Coder decoder
-- Zip Motion Blocks Video encoder
 - Musepack decoder
 - Flash Screen Video encoder
 - Theora encoding via libtheora
@@ -514,10 +245,10 @@ version 0.5:
 - OS/2 support removed and restored again
 - AC-3 decoder
 - NUT muxer
-- additional SPARC (VIS) optimizations
 - Matroska muxer
 - slice-based parallel H.264 decoding
 - Monkey's Audio demuxer and decoder
+- additional SPARC (VIS) optimizations
 - AMV audio and video decoder
 - DNxHD encoder
 - H.264 PAFF decoding
@@ -526,7 +257,6 @@ version 0.5:
 - libvorbis Vorbis decoding removed in favor of native decoder
 - IntraX8 (J-Frame) subdecoder for WMV2 and VC-1
 - Ogg (Theora, Vorbis and FLAC) muxer
-- The "device" muxers and demuxers are now in a new libavdevice library
 - PC Paintbrush PCX decoder
 - Sun Rasterfile decoder
 - TechnoTrend PVA demuxer
@@ -556,7 +286,6 @@ version 0.5:
 - AAC decoder
 - floating point PCM encoder/decoder
 - MXF muxer
-- DV100 AKA DVCPRO HD decoder and demuxer
 - E-AC-3 support added to AC-3 decoder
 - Nellymoser ASAO encoder
 - ASS and SSA demuxer and muxer
@@ -564,9 +293,8 @@ version 0.5:
 - SVQ3 watermark decoding support
 - Speex decoding via libspeex
 - Electronic Arts TGQ decoder
-- RV40 decoder
+- RV30 and RV40 decoder
 - QCELP / PureVoice decoder
-- RV30 decoder
 - hybrid WavPack support
 - R3D REDCODE demuxer
 - ALSA support for playback and record
@@ -576,7 +304,6 @@ version 0.5:
 - Gopher client support
 - MXF D-10 muxer
 - generic metadata API
-- flash ScreenVideo2 encoder
 
 
 version 0.4.9-pre1:
@@ -662,7 +389,6 @@ version 0.4.9-pre1:
 - many optimizations and bugfixes
 - FunCom ISS audio file demuxer and according ADPCM decoding
 
-
 version 0.4.8:
 
 - MPEG-2 video encoding (Michael)
@@ -673,7 +399,6 @@ version 0.4.8:
 - Interplay MVE playback subsystem (Mike Melanson)
 - Duck DK3 and DK4 ADPCM audio decoders (Mike Melanson)
 
-
 version 0.4.7:
 
 - RealAudio 1.0 (14_4) and 2.0 (28_8) native decoders. Author unknown, code from mplayerhq
@@ -714,7 +439,6 @@ version 0.4.7:
 
 .. And lots more new enhancements and fixes.
 
-
 version 0.4.6:
 
 - completely new integer only MPEG audio layer 1/2/3 decoder rewritten
@@ -751,7 +475,6 @@ version 0.4.6:
 - simple stats output (Juanjo)
 - 16-bit and 15-bit RGB/BGR/GBR support (Bisqwit)
 
-
 version 0.4.5:
 
 - some header fixes (Zdenek Kabelac <kabi at informatics.muni.cz>)
@@ -782,7 +505,6 @@ version 0.4.5:
 - added MJPEG raw format (input/ouput)
 - added JPEG image format support (input/output)
 
-
 version 0.4.4:
 
 - fixed some std header definitions (Bjorn Lindgren
@@ -807,7 +529,6 @@ version 0.4.4:
 - codecs are no longer searched by read_header() (should fix ffserver
   segfault)
 
-
 version 0.4.3:
 
 - BGR24 patch (initial patch by Jeroen Vreeken <pe1rxq at amsat.org>)
@@ -828,7 +549,6 @@ version 0.4.3:
   <lists at reserv.at>, but changed completely since we use a format
   instead of a protocol)
 
-
 version 0.4.2:
 
 - added H.263/MPEG-4/MSMPEG4 decoding support. MPEG-4 decoding support
@@ -845,7 +565,6 @@ version 0.4.2:
 - added file overwrite confirmation (can be disabled with -y)
 - added custom size picture to H.263 using H.263+ (Juanjo)
 
-
 version 0.4.1:
 
 - added MSMPEG4 (aka DivX) compatible encoder. Changed default codec
@@ -858,7 +577,6 @@ version 0.4.1:
 - improved dct_quantize speed
 - factorized some motion estimation code
 
-
 version 0.4.0:
 
 - removing grab code from ffserver and moved it to ffmpeg. Added
@@ -886,12 +604,10 @@ version 0.4.0:
 - changed directories: libav for format handling, libavcodec for
   codecs
 
-
 version 0.3.4:
 
 - added stereo in MPEG audio encoder
 
-
 version 0.3.3:
 
 - added 'high quality' mode which use motion vectors. It can be used in
@@ -899,18 +615,15 @@ version 0.3.3:
 - fixed rounding problems which caused quality problems at high
   bitrates and large GOP size
 
-
 version 0.3.2: small fixes
 
 - ASF fixes
 - put_seek bug fix
 
-
 version 0.3.1: added avi/divx support
 
 - added AVI support
 - added MPEG-4 codec compatible with OpenDivX. It is based on the H.263 codec
 - added sound for flash format (not tested)
 
-
 version 0.3: initial public release

INSTALL

@@ -9,7 +9,3 @@ path when launching 'configure', e.g. '/ffmpegdir/ffmpeg/configure'.
 2) Then type 'make' to build FFmpeg. GNU Make 3.81 or later is required.
 
 3) Type 'make install' to install all binaries and libraries you built.
-
-NOTICE
-
- - Non system dependencies (e.g. libx264, libvpx) are disabled by default.

LICENSE

@@ -14,7 +14,10 @@ configure to activate them. In this case, FFmpeg's license changes to GPL v2+.
 Specifically, the GPL parts of FFmpeg are
 
 - libpostproc
+- some x86 optimizations in libswscale
 - optional x86 optimizations in the files
+  libavcodec/x86/h264_deblock_sse2.asm
+  libavcodec/x86/h264_idct_sse2.asm
   libavcodec/x86/idct_mmx.c
 - the X11 grabber in libavdevice/x11grab.c
 
@@ -41,6 +44,7 @@ is incompatible with the LGPL v2.1 and the GPL v2, but not with version 3 of
 those licenses. So to combine the OpenCORE libraries with FFmpeg, the license
 version needs to be upgraded by passing --enable-version3 to configure.
 
-The nonfree external libraries libfaac and libaacplus can be hooked up in FFmpeg.
-You need to pass --enable-nonfree to configure to enable it. Employ this option
-with care as FFmpeg then becomes nonfree and unredistributable.
+The nonfree external libraries libamrnb, libamrwb and libfaac can be hooked up
+in FFmpeg. You need to pass --enable-nonfree to configure to enable them. Employ
+this option with care as FFmpeg then becomes nonfree and unredistributable.
+Note that libfaac claims to be LGPL, but is not.

MAINTAINERS

@@ -4,12 +4,6 @@ FFmpeg maintainers
 Below is a list of the people maintaining different parts of the
 FFmpeg code.
 
-Please try to keep entries where you are the maintainer upto date!
-
-Names in () mean that the maintainer currently has no time to maintain the code.
-A CC after the name means that the maintainer prefers to be CC-ed on patches
-and related discussions.
-
 
 Project Leader
 ==============
@@ -24,11 +18,17 @@ Applications
 ffmpeg:
   ffmpeg.c                              Michael Niedermayer
 
-ffplay:
-  ffplay.c                              Marton Balint
+  Video Hooks:
+    vhook
+    vhook/watermark.c                   Marcus Engene
+    vhook/ppm.c
+    vhook/drawtext.c
+    vhook/fish.c
+    vhook/null.c
+    vhook/imlib2.c
 
-ffprobe:
-  ffprobe.c                             Stefano Sabatini
+ffplay:
+  ffplay.c                              Michael Niedermayer
 
 ffserver:
   ffserver.c, ffserver.h                Baptiste Coudurier
@@ -37,20 +37,19 @@ Commandline utility code:
   cmdutils.c, cmdutils.h                Michael Niedermayer
 
 QuickTime faststart:
-  tools/qt-faststart.c                  Baptiste Coudurier
+  qt-faststart.c                        Mike Melanson
 
 
 Miscellaneous Areas
 ===================
 
-documentation                           Mike Melanson
-website                                 Robert Swain, Lou Logan
+documentation                           Mike Melanson, Diego Biurrun
+website                                 Robert Swain
 build system (configure,Makefiles)      Diego Biurrun, Mans Rullgard
-project server                          Árpád Gereöffy, Michael Niedermayer, Reimar Döffinger
-mailinglists                            Michael Niedermayer, Baptiste Coudurier, Lou Logan
+project server                          Diego Biurrun, Mans Rullgard
+mailinglists                            Michael Niedermayer, Baptiste Coudurier
 presets                                 Robert Swain
-metadata subsystem                      Aurelien Jacobs
-release management                      Michael Niedermayer
+release management                      Diego Biurrun, Reinhard Tartler
 
 
 libavutil
@@ -87,8 +86,6 @@ Generic Parts:
     bitstream.c, bitstream.h            Michael Niedermayer
   CABAC:
     cabac.h, cabac.c                    Michael Niedermayer
-  codec names:
-    codec_names.sh                      Nicolas George
   DSP utilities:
     dsputils.c, dsputils.h              Michael Niedermayer
   entropy coding:
@@ -109,31 +106,25 @@ Generic Parts:
     simple_idct.c, simple_idct.h        Michael Niedermayer
   postprocessing:
     libpostproc/*                       Michael Niedermayer
-  table generation:
-    tableprint.c, tableprint.h          Reimar Doeffinger
+  vdpau:
+    vdpau*                              Carl Eugen Hoyos
 
 Codecs:
   4xm.c                                 Michael Niedermayer
   8bps.c                                Roberto Togni
   8svx.c                                Jaikrishnan Menon
   aasc.c                                Kostya Shishkov
+  aac.[ch], aactab.[ch], aacdectab.h    Robert Swain
   ac3*                                  Justin Ruggles
   alacenc.c                             Jaikrishnan Menon
-  alsdec.c                              Thilo Borgmann
   apedec.c                              Kostya Shishkov
-  ass*                                  Aurelien Jacobs
   asv*                                  Michael Niedermayer
   atrac3*                               Benjamin Larsson
-  bgmc.c, bgmc.h                        Thilo Borgmann
-  bink.c                                Kostya Shishkov
-  binkaudio.c                           Peter Ross
   bmp.c                                 Mans Rullgard, Kostya Shishkov
   cavs*                                 Stefan Gehrer
-  celp_filters.*                        Vitor Sessak
   cinepak.c                             Roberto Togni
   cljr                                  Alex Beregszaszi
   cook.c, cookdata.h                    Benjamin Larsson
-  crystalhd.c                           Philip Langdale
   cscd.c                                Reimar Doeffinger
   dca.c                                 Kostya Shishkov, Benjamin Larsson
   dnxhd*                                Baptiste Coudurier
@@ -142,11 +133,10 @@ Codecs:
   dv.c                                  Roman Shaposhnik
   eacmv*, eaidct*, eat*                 Peter Ross
   ffv1.c                                Michael Niedermayer
-  ffwavesynth.c                         Nicolas George
-  flac*                                 Justin Ruggles
+  flacdec.c                             Alex Beregszaszi, Justin Ruggles
+  flacenc.c                             Justin Ruggles
   flashsv*                              Benjamin Larsson
   flicvideo.c                           Mike Melanson
-  g722.c                                Martin Storsjo
   g726.c                                Roman Shaposhnik
   gifdec.c                              Baptiste Coudurier
   h264*                                 Loren Merritt, Michael Niedermayer
@@ -156,30 +146,18 @@ Codecs:
   idcinvideo.c                          Mike Melanson
   imc*                                  Benjamin Larsson
   indeo2*                               Kostya Shishkov
-  indeo5*                               Kostya Shishkov
   interplayvideo.c                      Mike Melanson
-  ivi*                                  Kostya Shishkov
   jpeg_ls.c                             Kostya Shishkov
-  jvdec.c                               Peter Ross
   kmvc.c                                Kostya Shishkov
-  lcl*.c                                Roberto Togni, Reimar Doeffinger
-  libcelt_dec.c                         Nicolas George
+  lcl*.c                                Roberto Togni
   libgsm.c                              Michel Bardiaux
-  libdirac*                             David Conrad
   libopenjpeg.c                         Jaikrishnan Menon
-  libopenjpegenc.c                      Michael Bradshaw
-  libschroedinger*                      David Conrad
-  libspeexdec.c                         Justin Ruggles
-  libtheoraenc.c                        David Conrad
-  libvorbis.c                           David Conrad
-  libxavs.c                             Stefan Gehrer
   libx264.c                             Mans Rullgard, Jason Garrett-Glaser
   loco.c                                Kostya Shishkov
   lzo.h, lzo.c                          Reimar Doeffinger
   mdec.c                                Michael Niedermayer
   mimic.c                               Ramiro Polla
   mjpeg.c                               Michael Niedermayer
-  mlp*                                  Ramiro Polla
   mmvideo.c                             Peter Ross
   mpc*                                  Kostya Shishkov
   mpeg12.c, mpeg12data.h                Michael Niedermayer
@@ -190,7 +168,6 @@ Codecs:
   nellymoserdec.c                       Benjamin Larsson
   nuv.c                                 Reimar Doeffinger
   pcx.c                                 Ivo van Poorten
-  pgssubdec.c                           Reimar Doeffinger
   ptx.c                                 Ivo van Poorten
   qcelp*                                Reynaldo H. Verdejo Pinochet
   qdm2.c, qdm2data.h                    Roberto Togni, Benjamin Larsson
@@ -206,11 +183,9 @@ Codecs:
   rv3*                                  Kostya Shishkov
   rv4*                                  Kostya Shishkov
   s3tc*                                 Ivo van Poorten
-  smacker.c                             Kostya Shishkov
   smc.c                                 Mike Melanson
   snow.c                                Michael Niedermayer, Loren Merritt
   sonic.c                               Alex Beregszaszi
-  srt*                                  Aurelien Jacobs
   sunrast.c                             Ivo van Poorten
   svq3.c                                Michael Niedermayer
   targa.c                               Kostya Shishkov
@@ -219,25 +194,20 @@ Codecs:
   truemotion2*                          Kostya Shishkov
   truespeech.c                          Kostya Shishkov
   tscc.c                                Kostya Shishkov
-  tta.c                                 Alex Beregszaszi, Jaikrishnan Menon
+  tta.c                                 Alex Beregszaszi
   txd.c                                 Ivo van Poorten
   ulti*                                 Kostya Shishkov
-  v410*.c                               Derek Buitenhuis
   vb.c                                  Kostya Shishkov
-  vble.c                                Derek Buitenhuis
   vc1*                                  Kostya Shishkov
   vcr1.c                                Michael Niedermayer
   vmnc.c                                Kostya Shishkov
   vorbis_enc.c                          Oded Shimon
-  vorbis_dec.c                          Denes Balatoni, David Conrad
+  vorbis_dec.c                          Denes Balatoni
   vp3*                                  Mike Melanson
   vp5                                   Aurelien Jacobs
   vp6                                   Aurelien Jacobs
-  vp8                                   David Conrad, Jason Garrett-Glaser, Ronald Bultje
   vqavideo.c                            Mike Melanson
   wavpack.c                             Kostya Shishkov
-  wmaprodec.c                           Sascha Sommer
-  wmavoice.c                            Ronald S. Bultje
   wmv2.c                                Michael Niedermayer
   wnv1.c                                Kostya Shishkov
   xan.c                                 Mike Melanson
@@ -245,14 +215,6 @@ Codecs:
   xvmc.c                                Ivan Kalvachev
   zmbv*                                 Kostya Shishkov
 
-Hardware acceleration:
-  crystalhd.c                           Philip Langdale
-  dxva2*                                Laurent Aimar
-  libstagefright.cpp                    Mohamed Naufal
-  vaapi*                                Gwenole Beauchesne
-  vda*                                  Sebastien Zwickert
-  vdpau*                                Carl Eugen Hoyos
-
 
 libavdevice
 ===========
@@ -265,18 +227,6 @@ libavdevice
   vfwcap.c                              Ramiro Polla
 
 
-libavfilter
-===========
-
-Video filters:
-  graphdump.c                           Nicolas George
-  af_amerge.c                           Nicolas George
-  af_astreamsync.c                      Nicolas George
-  af_pan.c                              Nicolas George
-  vsrc_mandelbrot.c                     Michael Niedermayer
-  vf_yadif.c                            Michael Niedermayer
-
-
 libavformat
 ===========
 
@@ -292,15 +242,11 @@ Muxers/Demuxers:
   adtsenc.c                             Robert Swain
   aiff.c                                Baptiste Coudurier
   ape.c                                 Kostya Shishkov
-  ass*                                  Aurelien Jacobs
   avi*                                  Michael Niedermayer
-  bink.c                                Peter Ross
-  caf*                                  Peter Ross
   crc.c                                 Michael Niedermayer
   daud.c                                Reimar Doeffinger
   dv.c                                  Roman Shaposhnik
   dxa.c                                 Kostya Shishkov
-  electronicarts.c                      Peter Ross
   ffm*                                  Baptiste Coudurier
   flac*                                 Justin Ruggles
   flic.c                                Mike Melanson
@@ -308,57 +254,44 @@ Muxers/Demuxers:
   gxf.c                                 Reimar Doeffinger
   gxfenc.c                              Baptiste Coudurier
   idcin.c                               Mike Melanson
-  idroqdec.c                            Mike Melanson
+  idroq.c                               Mike Melanson
   iff.c                                 Jaikrishnan Menon
   ipmovie.c                             Mike Melanson
   img2.c                                Michael Niedermayer
   iss.c                                 Stefan Gehrer
-  jvdec.c                               Peter Ross
-  libmodplug.c                          Clément Bœsch
   libnut.c                              Oded Shimon
   lmlm4.c                               Ivo van Poorten
-  lxfdec.c                              Tomas Härdin
   matroska.c                            Aurelien Jacobs
-  matroskadec.c                         Aurelien Jacobs
   matroskaenc.c                         David Conrad
-  metadata*                             Aurelien Jacobs
-  microdvd*                             Aurelien Jacobs
   mm.c                                  Peter Ross
   mov.c                                 Michael Niedermayer, Baptiste Coudurier
   movenc.c                              Michael Niedermayer, Baptiste Coudurier
   mpc.c                                 Kostya Shishkov
   mpeg.c                                Michael Niedermayer
   mpegenc.c                             Michael Niedermayer
-  mpegts*                               Baptiste Coudurier
+  mpegts*                               Mans Rullgard
   msnwc_tcp.c                           Ramiro Polla
   mtv.c                                 Reynaldo H. Verdejo Pinochet
   mxf*                                  Baptiste Coudurier
-  mxfdec.c                              Tomas Härdin
   nsvdec.c                              Francois Revol
   nut.c                                 Michael Niedermayer
   nuv.c                                 Reimar Doeffinger
-  oggdec.c, oggdec.h                    David Conrad
+  oggdec.c, oggdec.h                    Mans Rullgard
   oggenc.c                              Baptiste Coudurier
-  oggparse*.c                           David Conrad
-  oma.c                                 Maxim Poliakovski
+  oggparsevorbis.c                      Mans Rullgard
+  oggparseogm.c                         Mans Rullgard
   psxstr.c                              Mike Melanson
   pva.c                                 Ivo van Poorten
   r3d.c                                 Baptiste Coudurier
   raw.c                                 Michael Niedermayer
-  rdt.c                                 Ronald S. Bultje
   rl2.c                                 Sascha Sommer
-  rmdec.c, rmenc.c                      Ronald S. Bultje, Kostya Shishkov
-  rtmp*                                 Kostya Shishkov
-  rtp.c, rtpenc.c                       Martin Storsjo
-  rtpdec_asf.*                          Ronald S. Bultje
-  rtpenc_mpv.*, rtpenc_aac.*            Martin Storsjo
+  rm.c                                  Roberto Togni
+  rtp.c, rtpenc.c                       Luca Abeni
+  rtp_mpv.*, rtp_aac.*                  Luca Abeni
   rtsp.c                                Luca Barbato
-  sbgdec.c                              Nicolas George
-  sdp.c                                 Martin Storsjo
+  sdp.c                                 Luca Abeni
   segafilm.c                            Mike Melanson
   siff.c                                Kostya Shishkov
-  smacker.c                             Kostya Shishkov
-  srtdec.c                              Aurelien Jacobs
   swf.c                                 Baptiste Coudurier
   tta.c                                 Alex Beregszaszi
   txd.c                                 Ivo van Poorten
@@ -366,12 +299,9 @@ Muxers/Demuxers:
   wav.c                                 Michael Niedermayer
   wc3movie.c                            Mike Melanson
   westwood.c                            Mike Melanson
-  wtv.c                                 Peter Ross
   wv.c                                  Kostya Shishkov
 
 Protocols:
-  http.c                                Ronald S. Bultje
-  mms*.c                                Ronald S. Bultje
   udp.c                                 Luca Abeni
 
 
@@ -380,8 +310,7 @@ Operating systems / CPU architectures
 
 Alpha                                   Mans Rullgard, Falk Hueffner
 ARM                                     Mans Rullgard
-AVR32                                   Mans Rullgard
-MIPS                                    Mans Rullgard
+BeOS                                    Francois Revol
 Mac OS X / PowerPC                      Romain Dolbeau, Guillaume Poirier
 Amiga / PowerPC                         Colin Ward
 Linux / PowerPC                         Luca Barbato
@@ -392,38 +321,15 @@ Sparc                                   Roman Shaposhnik
 x86                                     Michael Niedermayer
 
 
-Releases
-========
+GnuPG Fingerprints of maintainers and others who have svn write access
+======================================================================
 
-0.9                                     Michael Niedermayer
-
-
-
-GnuPG Fingerprints of maintainers and contributors
-==================================================
-
-Anssi Hannula                 1A92 FF42 2DD9 8D2E 8AF7 65A9 4278 C520 513D F3CB
-Anton Khirnov                 6D0C 6625 56F8 65D1 E5F5 814B B50A 1241 C067 07AB
-Attila Kinali                 11F0 F9A6 A1D2 11F6 C745 D10C 6520 BCDD F2DF E765
-Baptiste Coudurier            8D77 134D 20CC 9220 201F C5DB 0AC9 325C 5C1A BAAA
-Ben Littler                   3EE3 3723 E560 3214 A8CD 4DEB 2CDB FCE7 768C 8D2C
 Benoit Fouet                  B22A 4F4F 43EF 636B BB66 FCDC 0023 AE1E 2985 49C8
-Daniel Verkamp                78A6 07ED 782C 653E C628 B8B9 F0EB 8DD8 2F0E 21C7
 Diego Biurrun                 8227 1E31 B6D9 4994 7427 E220 9CAE D6CC 4757 FCC5
-Gwenole Beauchesne            2E63 B3A6 3E44 37E2 017D 2704 53C7 6266 B153 99C4
-Jaikrishnan Menon             61A1 F09F 01C9 2D45 78E1 C862 25DC 8831 AF70 D368
-Justin Ruggles                3136 ECC0 C10D 6C04 5F43 CA29 FCBE CD2A 3787 1EBF
 Loren Merritt                 ABD9 08F4 C920 3F65 D8BE 35D7 1540 DAA7 060F 56DE
-Lou Logan                     7D68 DC73 CBEF EABB 671A B6CF 621C 2E28 82F8 DC3A
-Luca Barbato                  6677 4209 213C 8843 5B67 29E7 E84C 78C2 84E9 0E34
 Michael Niedermayer           9FF2 128B 147E F673 0BAD F133 611E C787 040B 0FAB
-Nicolas George                24CE 01CE 9ACC 5CEB 74D8 8D9D B063 D997 36E5 4C93
-Panagiotis Issaris            6571 13A3 33D9 3726 F728 AA98 F643 B12E ECF3 E029
 Peter Ross                    A907 E02F A6E5 0CD2 34CD 20D2 6760 79C5 AC40 DD6B
 Reimar Döffinger              C61D 16E5 9E2C D10C 8958 38A4 0899 A2B9 06D4 D9C7
 Reinhard Tartler              9300 5DC2 7E87 6C37 ED7B CA9A 9808 3544 9453 48A4
 Reynaldo H. Verdejo Pinochet  6E27 CD34 170C C78E 4D4F 5F40 C18E 077F 3114 452A
-Robert Swain                  EE7A 56EA 4A81 A7B5 2001 A521 67FA 362D A2FC 3E71
 Sascha Sommer                 38A0 F88B 868E 9D3A 97D4 D6A0 E823 706F 1E07 0D3C
-Stefano Sabatini              9A43 10F8 D32C D33C 48E7 C52C 5DF2 8E4D B2EE 066B
-Tomas Härdin                  D133 29CA 4EEC 9DB4 7076 F697 B04B 7403 3313 41FD

Makefile

@@ -1,72 +1,54 @@
-MAIN_MAKEFILE=1
 include config.mak
 
-vpath %.c    $(SRC_PATH)
-vpath %.cpp  $(SRC_PATH)
-vpath %.h    $(SRC_PATH)
-vpath %.S    $(SRC_PATH)
-vpath %.asm  $(SRC_PATH)
-vpath %.v    $(SRC_PATH)
-vpath %.texi $(SRC_PATH)
-vpath %/fate_config.sh.template $(SRC_PATH)
+SRC_DIR = $(SRC_PATH_BARE)
+
+vpath %.texi $(SRC_PATH_BARE)
 
 PROGS-$(CONFIG_FFMPEG)   += ffmpeg
 PROGS-$(CONFIG_FFPLAY)   += ffplay
-PROGS-$(CONFIG_FFPROBE)  += ffprobe
 PROGS-$(CONFIG_FFSERVER) += ffserver
 
-PROGS      := $(PROGS-yes:%=%$(EXESUF))
-INSTPROGS   = $(PROGS-yes:%=%$(PROGSSUF)$(EXESUF))
-OBJS        = $(PROGS-yes:%=%.o) cmdutils.o
-TESTTOOLS   = audiogen videogen rotozoom tiny_psnr base64
-HOSTPROGS  := $(TESTTOOLS:%=tests/%)
-TOOLS       = qt-faststart trasher
-TOOLS-$(CONFIG_ZLIB) += cws2fws
+PROGS       = $(addsuffix   $(EXESUF), $(PROGS-yes))
+PROGS_G     = $(addsuffix _g$(EXESUF), $(PROGS-yes))
+OBJS        = $(addsuffix .o,          $(PROGS-yes)) cmdutils.o
+MANPAGES    = $(addprefix doc/, $(addsuffix .1, $(PROGS-yes)))
 
-BASENAMES   = ffmpeg ffplay ffprobe ffserver
-ALLPROGS    = $(BASENAMES:%=%$(PROGSSUF)$(EXESUF))
-ALLPROGS_G  = $(BASENAMES:%=%$(PROGSSUF)_g$(EXESUF))
-ALLMANPAGES = $(BASENAMES:%=%.1)
+BASENAMES   = ffmpeg ffplay ffserver
+ALLPROGS    = $(addsuffix   $(EXESUF), $(BASENAMES))
+ALLPROGS_G  = $(addsuffix _g$(EXESUF), $(BASENAMES))
+ALLMANPAGES = $(addsuffix .1, $(BASENAMES))
 
-FFLIBS-$(CONFIG_AVDEVICE) += avdevice
 FFLIBS-$(CONFIG_AVFILTER) += avfilter
-FFLIBS-$(CONFIG_AVFORMAT) += avformat
-FFLIBS-$(CONFIG_AVCODEC)  += avcodec
 FFLIBS-$(CONFIG_POSTPROC) += postproc
-FFLIBS-$(CONFIG_SWRESAMPLE)+= swresample
 FFLIBS-$(CONFIG_SWSCALE)  += swscale
 
-FFLIBS := avutil
+FFLIBS := avdevice avformat avcodec avutil
 
-DATA_FILES := $(wildcard $(SRC_PATH)/presets/*.ffpreset) $(SRC_PATH)/doc/ffprobe.xsd
+DATA_FILES := $(wildcard $(SRC_DIR)/ffpresets/*.ffpreset)
 
-SKIPHEADERS = cmdutils_common_opts.h
-
-include $(SRC_PATH)/common.mak
+include common.mak
 
+FF_LDFLAGS   := $(FFLDFLAGS)
 FF_EXTRALIBS := $(FFEXTRALIBS)
 FF_DEP_LIBS  := $(DEP_LIBS)
 
-all: $(PROGS)
+ALL_TARGETS-$(CONFIG_VHOOK) += videohook
+ALL_TARGETS-$(BUILD_DOC)    += documentation
 
-$(PROGS): %$(EXESUF): %$(PROGSSUF)_g$(EXESUF)
-	$(CP) $< $@$(PROGSSUF)
-	$(STRIP) $@$(PROGSSUF)
+INSTALL_TARGETS-$(CONFIG_VHOOK) += install-vhook
+ifneq ($(PROGS),)
+INSTALL_TARGETS-yes             += install-progs install-data
+INSTALL_TARGETS-$(BUILD_DOC)    += install-man
+endif
+INSTALL_PROGS_TARGETS-$(BUILD_SHARED) = install-libs
 
-$(TOOLS): %$(EXESUF): %.o
-	$(LD) $(LDFLAGS) -o $@ $< $(ELIBS)
+all: $(FF_DEP_LIBS) $(PROGS) $(ALL_TARGETS-yes)
 
-tools/cws2fws$(EXESUF): ELIBS = -lz
+$(PROGS): %$(EXESUF): %_g$(EXESUF)
+	cp -p $< $@
+	$(STRIP) $@
 
-config.h: .config
-.config: $(wildcard $(FFLIBS:%=$(SRC_PATH)/lib%/all*.c))
-	@-tput bold 2>/dev/null
-	@-printf '\nWARNING: $(?F) newer than config.h, rerun configure\n\n'
-	@-tput sgr0 2>/dev/null
-
-SUBDIR_VARS := OBJS FFLIBS CLEANFILES DIRS TESTPROGS EXAMPLES SKIPHEADERS \
-               ALTIVEC-OBJS MMX-OBJS NEON-OBJS X86-OBJS YASM-OBJS-FFT YASM-OBJS \
-               HOSTPROGS BUILT_HEADERS TESTOBJS ARCH_HEADERS ARMV6-OBJS TOOLS
+SUBDIR_VARS := OBJS FFLIBS CLEANFILES DIRS TESTS
 
 define RESET
 $(1) :=
@@ -76,101 +58,303 @@ endef
 define DOSUBDIR
 $(foreach V,$(SUBDIR_VARS),$(eval $(call RESET,$(V))))
 SUBDIR := $(1)/
-include $(SRC_PATH)/$(1)/Makefile
--include $(SRC_PATH)/$(1)/$(ARCH)/Makefile
-include $(SRC_PATH)/library.mak
+include $(1)/Makefile
 endef
 
 $(foreach D,$(FFLIBS),$(eval $(call DOSUBDIR,lib$(D))))
 
-ffplay.o: CFLAGS += $(SDL_CFLAGS)
 ffplay_g$(EXESUF): FF_EXTRALIBS += $(SDL_LIBS)
-ffserver_g$(EXESUF): LDFLAGS += $(FFSERVERLDFLAGS)
+ffserver_g$(EXESUF): FF_LDFLAGS += $(FFSERVERLDFLAGS)
 
-%$(PROGSSUF)_g$(EXESUF): %.o cmdutils.o $(FF_DEP_LIBS)
-	$(LD) $(LDFLAGS) -o $@ $< cmdutils.o $(FF_EXTRALIBS)
+%_g$(EXESUF): %.o cmdutils.o $(FF_DEP_LIBS)
+	$(CC) $(FF_LDFLAGS) -o $@ $< cmdutils.o $(FF_EXTRALIBS)
 
-OBJDIRS += tools
+output_example$(EXESUF): output_example.o $(FF_DEP_LIBS)
+	$(CC) $(CFLAGS) $(FF_LDFLAGS) -o $@ $< $(FF_EXTRALIBS)
 
--include $(wildcard tools/*.d)
+tools/%$(EXESUF): tools/%.c
+	$(CC) $(CFLAGS) $(FF_LDFLAGS) -o $@ $< $(FF_EXTRALIBS)
 
-VERSION_SH  = $(SRC_PATH)/version.sh
-GIT_LOG     = $(SRC_PATH)/.git/logs/HEAD
+ffplay.o ffplay.d: CFLAGS += $(SDL_CFLAGS)
 
-.version: $(wildcard $(GIT_LOG)) $(VERSION_SH) config.mak
-.version: M=@
+cmdutils.o cmdutils.d: version.h
 
-version.h .version:
-	$(M)$(VERSION_SH) $(SRC_PATH) version.h $(EXTRA_VERSION)
-	$(Q)touch .version
+alltools: $(addsuffix $(EXESUF),$(addprefix tools/, cws2fws pktdumper qt-faststart trasher))
 
-# force version.sh to run whenever version might have changed
--include .version
+VHOOKCFLAGS += $(filter-out -mdynamic-no-pic,$(CFLAGS))
 
-ifdef PROGS
-install: install-progs install-data
-endif
+BASEHOOKS = fish null watermark
+ALLHOOKS = $(BASEHOOKS) drawtext imlib2 ppm
+ALLHOOKS_SRCS = $(addprefix vhook/, $(addsuffix .c, $(ALLHOOKS)))
 
-install: install-libs install-headers
+HOOKS-$(HAVE_FORK)      += ppm
+HOOKS-$(HAVE_IMLIB2)    += imlib2
+HOOKS-$(HAVE_FREETYPE2) += drawtext
 
-install-libs: install-libs-yes
+HOOKS = $(addprefix vhook/, $(addsuffix $(SLIBSUF), $(BASEHOOKS) $(HOOKS-yes)))
 
-install-progs-yes:
-install-progs-$(CONFIG_SHARED): install-libs
+VHOOKCFLAGS-$(HAVE_IMLIB2) += `imlib2-config --cflags`
+LIBS_imlib2$(SLIBSUF)       = `imlib2-config --libs`
 
-install-progs: install-progs-yes $(PROGS)
-	$(Q)mkdir -p "$(BINDIR)"
-	$(INSTALL) -c -m 755 $(INSTPROGS) "$(BINDIR)"
+VHOOKCFLAGS-$(HAVE_FREETYPE2) += `freetype-config --cflags`
+LIBS_drawtext$(SLIBSUF)        = `freetype-config --libs`
+
+VHOOKCFLAGS += $(VHOOKCFLAGS-yes)
+
+vhook/%.o vhook/%.d: CFLAGS:=$(VHOOKCFLAGS)
+
+# vhooks compile fine without libav*, but need them nonetheless.
+videohook: $(FF_DEP_LIBS) $(HOOKS)
+
+$(eval VHOOKSHFLAGS=$(VHOOKSHFLAGS))
+vhook/%$(SLIBSUF): vhook/%.o
+	$(CC) $(LDFLAGS) -o $@ $(VHOOKSHFLAGS) $< $(VHOOKLIBS) $(LIBS_$(@F))
+
+VHOOK_DEPS = $(HOOKS:$(SLIBSUF)=.d)
+depend dep: $(VHOOK_DEPS)
+
+documentation: $(addprefix doc/, ffmpeg-doc.html faq.html ffserver-doc.html \
+                                 ffplay-doc.html general.html hooks.html \
+                                 $(ALLMANPAGES))
+
+doc/%.html: doc/%.texi
+	texi2html -monolithic -number $<
+	mv $(@F) $@
+
+doc/%.pod: doc/%-doc.texi
+	doc/texi2pod.pl $< $@
+
+doc/%.1: doc/%.pod
+	pod2man --section=1 --center=" " --release=" " $< > $@
+
+install: $(INSTALL_TARGETS-yes)
+
+install-progs: $(PROGS) $(INSTALL_PROGS_TARGETS-yes)
+	install -d "$(BINDIR)"
+	install -c -m 755 $(PROGS) "$(BINDIR)"
 
 install-data: $(DATA_FILES)
-	$(Q)mkdir -p "$(DATADIR)"
-	$(INSTALL) -m 644 $(DATA_FILES) "$(DATADIR)"
+	install -d "$(DATADIR)"
+	install -m 644 $(DATA_FILES) "$(DATADIR)"
 
-uninstall: uninstall-libs uninstall-headers uninstall-progs uninstall-data
+install-man: $(MANPAGES)
+	install -d "$(MANDIR)/man1"
+	install -m 644 $(MANPAGES) "$(MANDIR)/man1"
+
+install-vhook: videohook
+	install -d "$(SHLIBDIR)/vhook"
+	install -m 755 $(HOOKS) "$(SHLIBDIR)/vhook"
+
+uninstall: uninstall-progs uninstall-data uninstall-man uninstall-vhook
 
 uninstall-progs:
-	$(RM) $(addprefix "$(BINDIR)/", $(ALLPROGS))
+	rm -f $(addprefix "$(BINDIR)/", $(ALLPROGS))
 
 uninstall-data:
-	$(RM) -r "$(DATADIR)"
+	rm -rf "$(DATADIR)"
 
-clean::
-	$(RM) $(ALLPROGS) $(ALLPROGS_G)
-	$(RM) $(CLEANSUFFIXES)
-	$(RM) $(TOOLS)
-	$(RM) $(CLEANSUFFIXES:%=tools/%)
-	$(RM) coverage.info
-	$(RM) -r coverage-html
+uninstall-man:
+	rm -f $(addprefix "$(MANDIR)/man1/",$(ALLMANPAGES))
+
+uninstall-vhook:
+	rm -f $(addprefix "$(SHLIBDIR)/",$(ALLHOOKS_SRCS:.c=$(SLIBSUF)))
+	-rmdir "$(SHLIBDIR)/vhook/"
+
+testclean:
+	rm -rf tests/vsynth1 tests/vsynth2 tests/data tests/asynth1.sw tests/*~
+
+clean:: testclean
+	rm -f $(ALLPROGS) $(ALLPROGS_G) output_example$(EXESUF)
+	rm -f doc/*.html doc/*.pod doc/*.1
+	rm -f $(addprefix tests/,$(addsuffix $(EXESUF),audiogen videogen rotozoom seek_test tiny_psnr))
+	rm -f $(addprefix tools/,$(addsuffix $(EXESUF),cws2fws pktdumper qt-faststart trasher))
+	rm -f vhook/*.o vhook/*~ vhook/*.so vhook/*.dylib vhook/*.dll
 
 distclean::
-	$(RM) $(DISTCLEANSUFFIXES)
-	$(RM) config.* .version version.h libavutil/avconfig.h
+	rm -f version.h config.* vhook/*.d
 
-config:
-	$(SRC_PATH)/configure $(value FFMPEG_CONFIGURATION)
+# regression tests
 
-# Without the sed genthml thinks "libavutil" and "./libavutil" are two different things
-coverage.info: $(wildcard *.gcda *.gcno */*.gcda */*.gcno */*/*.gcda */*/*.gcno)
-	$(Q)lcov -c -d . -b . | sed -e 's#/./#/#g' > $@
+check: test checkheaders
 
-coverage-html: coverage.info
-	$(Q)mkdir -p $@
-	$(Q)genhtml -o $@ $<
-	$(Q)touch $@
+fulltest test: codectest libavtest seektest
 
-include $(SRC_PATH)/doc/Makefile
-include $(SRC_PATH)/tests/Makefile
+FFMPEG_REFFILE   = $(SRC_PATH)/tests/ffmpeg.regression.ref
+FFSERVER_REFFILE = $(SRC_PATH)/tests/ffserver.regression.ref
+LIBAV_REFFILE    = $(SRC_PATH)/tests/libav.regression.ref
+ROTOZOOM_REFFILE = $(SRC_PATH)/tests/rotozoom.regression.ref
+SEEK_REFFILE     = $(SRC_PATH)/tests/seek.regression.ref
 
-$(sort $(OBJDIRS)):
-	$(Q)mkdir -p $@
+CODEC_TESTS = $(addprefix regtest-,             \
+        mpeg                                    \
+        mpeg2                                   \
+        mpeg2thread                             \
+        msmpeg4v2                               \
+        msmpeg4                                 \
+        wmv1                                    \
+        wmv2                                    \
+        h261                                    \
+        h263                                    \
+        h263p                                   \
+        mpeg4                                   \
+        huffyuv                                 \
+        rc                                      \
+        mpeg4adv                                \
+        mpeg4thread                             \
+        error                                   \
+        mpeg4nr                                 \
+        mpeg1b                                  \
+        mjpeg                                   \
+        ljpeg                                   \
+        jpegls                                  \
+        rv10                                    \
+        rv20                                    \
+        asv1                                    \
+        asv2                                    \
+        flv                                     \
+        ffv1                                    \
+        snow                                    \
+        snowll                                  \
+        dv                                      \
+        dv50                                    \
+        svq1                                    \
+        flashsv                                 \
+        mp2                                     \
+        ac3                                     \
+        g726                                    \
+        adpcm_ima_wav                           \
+        adpcm_ima_qt                            \
+        adpcm_ms                                \
+        adpcm_yam                               \
+        adpcm_swf                               \
+        flac                                    \
+        wma                                     \
+        pcm                                     \
+    )
 
-# Dummy rule to stop make trying to rebuild removed or renamed headers
-%.h:
-	@:
+LAVF_TESTS = $(addprefix regtest-,              \
+        avi                                     \
+        asf                                     \
+        rm                                      \
+        mpg                                     \
+        ts                                      \
+        swf                                     \
+        ffm                                     \
+        flv_fmt                                 \
+        mov                                     \
+        dv_fmt                                  \
+        gxf                                     \
+        nut                                     \
+        mkv                                     \
+        pbmpipe                                 \
+        pgmpipe                                 \
+        ppmpipe                                 \
+        gif                                     \
+        yuv4mpeg                                \
+        pgm                                     \
+        ppm                                     \
+        bmp                                     \
+        tga                                     \
+        tiff                                    \
+        sgi                                     \
+        jpg                                     \
+        wav                                     \
+        alaw                                    \
+        mulaw                                   \
+        au                                      \
+        mmf                                     \
+        aiff                                    \
+        voc                                     \
+        ogg                                     \
+        pixfmt                                  \
+    )
 
-# Disable suffix rules.  Most of the builtin rules are suffix rules,
-# so this saves some time on slow systems.
-.SUFFIXES:
+REGFILES = $(addprefix tests/data/,$(addsuffix .$(1),$(2:regtest-%=%)))
 
-.PHONY: all all-yes alltools *clean config examples install*
-.PHONY: testprogs uninstall*
+CODEC_ROTOZOOM = $(call REGFILES,rotozoom.regression,$(CODEC_TESTS))
+CODEC_VSYNTH   = $(call REGFILES,vsynth.regression,$(CODEC_TESTS))
+
+LAVF_REGFILES = $(call REGFILES,lavf.regression,$(LAVF_TESTS))
+
+LAVF_REG     = tests/data/lavf.regression
+ROTOZOOM_REG = tests/data/rotozoom.regression
+VSYNTH_REG   = tests/data/vsynth.regression
+
+ifneq ($(CONFIG_SWSCALE),yes)
+servertest codectest $(CODEC_TESTS) libavtest: swscale-error
+swscale-error:
+	@echo
+	@echo "This regression test requires --enable-swscale."
+	@echo
+	@exit 1
+endif
+
+ifneq ($(CONFIG_ZLIB),yes)
+regtest-flashsv codectest: zlib-error
+endif
+zlib-error:
+	@echo
+	@echo "This regression test requires zlib."
+	@echo
+	@exit 1
+
+codectest: $(VSYNTH_REG) $(ROTOZOOM_REG)
+	diff -u -w $(FFMPEG_REFFILE)   $(VSYNTH_REG)
+	diff -u -w $(ROTOZOOM_REFFILE) $(ROTOZOOM_REG)
+
+libavtest: $(LAVF_REG)
+	diff -u -w $(LIBAV_REFFILE) $(LAVF_REG)
+
+$(VSYNTH_REG) $(ROTOZOOM_REG) $(LAVF_REG):
+	cat $^ > $@
+
+$(LAVF_REG):     $(LAVF_REGFILES)
+$(ROTOZOOM_REG): $(CODEC_ROTOZOOM)
+$(VSYNTH_REG):   $(CODEC_VSYNTH)
+
+$(CODEC_VSYNTH) $(CODEC_ROTOZOOM): $(CODEC_TESTS)
+
+$(LAVF_REGFILES): $(LAVF_TESTS)
+
+$(CODEC_TESTS) $(LAVF_TESTS): regtest-ref
+
+regtest-ref: ffmpeg$(EXESUF) tests/vsynth1/00.pgm tests/vsynth2/00.pgm tests/asynth1.sw
+
+$(CODEC_TESTS) regtest-ref: tests/tiny_psnr$(EXESUF)
+	$(SRC_PATH)/tests/regression.sh $@ vsynth   tests/vsynth1 a "$(TARGET_EXEC)" "$(TARGET_PATH)"
+	$(SRC_PATH)/tests/regression.sh $@ rotozoom tests/vsynth2 a "$(TARGET_EXEC)" "$(TARGET_PATH)"
+
+$(LAVF_TESTS):
+	$(SRC_PATH)/tests/regression.sh $@ lavf tests/vsynth1 b "$(TARGET_EXEC)" "$(TARGET_PATH)"
+
+seektest: codectest libavtest tests/seek_test$(EXESUF)
+	$(SRC_PATH)/tests/seek_test.sh $(SEEK_REFFILE) "$(TARGET_EXEC)" "$(TARGET_PATH)"
+
+servertest: ffserver$(EXESUF) tests/vsynth1/00.pgm tests/asynth1.sw
+	@echo
+	@echo "Unfortunately ffserver is broken and therefore its regression"
+	@echo "test fails randomly. Treat the results accordingly."
+	@echo
+	$(SRC_PATH)/tests/server-regression.sh $(FFSERVER_REFFILE) $(SRC_PATH)/tests/test.conf
+
+tests/vsynth1/00.pgm: tests/videogen$(EXESUF)
+	mkdir -p tests/vsynth1
+	$(BUILD_ROOT)/$< 'tests/vsynth1/'
+
+tests/vsynth2/00.pgm: tests/rotozoom$(EXESUF)
+	mkdir -p tests/vsynth2
+	$(BUILD_ROOT)/$< 'tests/vsynth2/' $(SRC_PATH)/tests/lena.pnm
+
+tests/asynth1.sw: tests/audiogen$(EXESUF)
+	$(BUILD_ROOT)/$< $@
+
+tests/%$(EXESUF): tests/%.c
+	$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $< $(HOSTLIBS)
+
+tests/seek_test$(EXESUF): tests/seek_test.c $(FF_DEP_LIBS)
+	$(CC) $(FF_LDFLAGS) $(CFLAGS) -o $@ $< $(FF_EXTRALIBS)
+
+
+.PHONY: lib videohook documentation *test regtest-* swscale-error zlib-error alltools check
+
+-include $(VHOOK_DEPS)

RELEASE

@@ -1 +1,254 @@
-0.10.2
+Release Notes
+=============
+
+* 0.5 "Bike Shed World Domination" March 3, 2009
+
+General notes
+-------------
+
+It has been so long since the last release that this should be considered the
+first FFmpeg release of recent times. Because of the way things have unfolded to
+date, the notes for this version cannot be entirely conventional.
+
+See the Changelog file for a list of significant changes.
+
+Please note that our policy on bug reports has not changed. We still only accept
+bug reports against HEAD of the FFmpeg trunk repository. If you are experiencing
+any issues with any formally released version of FFmpeg, please try a current
+version of the development code to check if the issue still exists. If it does,
+make your report against the development code following the usual bug reporting
+guidelines.
+
+API notes
+---------
+
+In the next release, it is intended to remove a number of deprecated APIs. We
+decided to put out a release that includes said APIs for the benefit of third
+party software.
+
+As such, this release:
+- provides a sync point for said APIs
+- increases awareness of API changes
+- allows the next release to detail how to transition from the old to the new
+
+The deprecated APIs to be removed are:
+- imgconvert (to be replaced by libswscale)
+- vhook (to be replaced by libavfilter)
+
+If at all possible, do not use the deprecated APIs. All notes on API changes
+should appear in doc/APIchanges.
+
+
+
+* 0.5.1 March 2, 2010
+
+General notes
+-------------
+
+This point release includes some minor updates to make the 0.5 release series
+usable for users that need to retain the existing behavior as closely as
+possible. The changes follow below:
+
+Security fixes
+--------------
+
+Various programming errors in container and codec implementations
+may lead to denial of service or the execution of arbitrary code
+if the user is tricked into opening a malformed media file or stream.
+
+Affected and updated have been the implementations of the following
+codecs and container formats:
+
+ - the Vorbis audio codec
+ - the FF Video 1 codec
+ - the MPEG audio codec
+ - the H264 video codec
+ - the MLP codec
+ - the HuffYUV codec
+ - the ASF demuxer
+ - the Ogg container implementation
+ - the MOV container implementation
+
+Symbol Versioning enabled
+-------------------------
+
+The backported symbol versioning change is enabled on platforms that support
+it. This allows users to upgrade from 0.5.1 to the upcoming 0.6 release
+without having to recompile their applications. Please note that distributors
+have to recompile applications against 0.5.1 before upgrading to 0.6.
+
+libx264.c backport
+------------------
+
+This release includes a backport to the libx264 wrapper that allows FFmpeg to
+be compiled against newer versions of libx264 up to API version 85.
+
+licensing changes
+-----------------
+
+Previously both libswscale and our AC-3 decoder had GPLed parts. These have
+been replaced by fresh LGPL code. x86 optimizations for libswscale remain GPL,
+but the C code is fully functional. Optimizations for other architectures have
+been relicensed to LGPL.
+
+AMR-NB decoding/encoding and AMR-WB decoding is now possible through the free
+software OpenCORE libraries as an alternative to the non-free libamr libraries.
+
+We found out that libfaac contains non-free parts and is not LGPL as previously
+claimed. We have changed configure to reflect this. You now have to pass the
+--enable-nonfree option if you wish to compile with libfaac support enabled.
+
+Furthermore the non-free bits in libavcodec/fdctref.c have been rewritten. Note
+well that they were only used in a test program and never compiled into any
+FFmpeg library.
+
+
+
+* 0.5.2 May 25, 2010
+
+General notes
+-------------
+
+This is a maintenance-only release that addresses a small number of security
+and portability issues. Distributors and system integrators are encouraged
+to update and share their patches against this branch.
+
+
+
+* 0.5.3 Oct 18, 2010
+
+General notes
+-------------
+
+This is (again) another maintenance-only release that addresses a fix
+for seekable HTTP and an exploitable bug in the FLIC decoder
+(cf. CVE-2010-3429 for details). Distributors and system integrators are
+encouraged to update and share their patches against this branch.
+
+
+
+* 0.5.4 Mar 17, 2011
+
+General notes
+-------------
+
+This is the first release that we cut after git migration. It is another
+maintenance-only release that addresses several security issues that were
+brought to our attention. In detail, fixes for RV30/40, WMV, Vorbis and
+VC-1 have been backported from trunk. Distributors and system integrators
+are encouraged to update and share their patches against this branch.
+
+
+
+* 0.5.5 Nov 6, 2011
+
+General notes
+-------------
+
+This maintenance-only release addresses several security issues that
+were brought to our attention. In detail, fixes for the MJPEG decoder,
+the CAVS decoder (CVE-2011-3362, CVE-2011-3973, CVE-2011-3974), and the
+Matroska decoder (MSVR11-011/CVE-2011-3504) and many others have been
+corrected. Additional, this release contains fixes for compilation with
+gcc-4.6. Distributors and system integrators are encouraged to update
+and share their patches against this branch.
+
+
+
+* 0.5.6 Nov 21, 2011
+
+General notes
+-------------
+
+This maintenance-only release addresses several security issues that
+were brought to our attention.
+
+
+
+* 0.5.7 Dec 25, 2011
+
+General notes
+-------------
+
+This maintenance-only release addresses several security issues that
+were brought to our attention. In details, it features fixes for the
+QDM2 decoder (CVE-2011-4351), DoS in the VP5/VP6 decoders
+(CVE-2011-4353), and a buffer overflow in the Sierra VMD decoder
+CVE-2011-4364, and a safety fix in the SVQ1 decoder (CVE-2011-4579).
+CVE-2011-4352, a bug in the VP3 decoder, is not known to affect this
+release.
+
+Distributors and system integrators are encouraged to update and share
+their patches against this branch.
+
+
+
+* 0.5.8 Jan 12, 2012
+
+General notes
+-------------
+
+This mostly maintenance-only release that addresses a number a number of
+bugs such as security and compilation issues that have been brought to
+our attention. Among other (rather minor) fixes, this release features
+fixes for the VP3 decoder (CVE-2011-3892), vorbis decoder, and matroska
+demuxer (CVE-2011-3893 and CVE-2011-3895).
+
+Distributors and system integrators are encouraged
+to update and share their patches against this branch.  For a full list
+of changes please see the Changelog file.
+
+
+
+* 0.5.9 May 11, 2012
+
+General notes
+-------------
+
+This maintenance-only release that addresses a number a number of
+security issues that have been brought to our attention. Among other
+(rather minor) fixes, this release features fixes for the DV decoder
+(CVE-2011-3929 and CVE-2011-3936), nsvdec (CVE-2011-3940), Atrac3
+(CVE-2012-0853), mjpegdec (CVE-2011-3947) and the VQA video decoder
+(CVE-2012-0947).
+
+Distributors and system integrators are encouraged
+to update and share their patches against this branch.  For a full list
+of changes please see the Changelog file.
+
+
+
+* 0.5.10 Jun 09, 2012
+
+General notes
+-------------
+
+This mostly maintenance-only release addresses a number of bugs such as
+security and compilation issues that have been brought to our
+attention. Among other fixes, this release includes security updates for
+the DPCM codecs (CVE-2011-3951), H.264 (CVE-2012-0851), ADPCM
+(CVE-2012-0852), and the KMVC decoder (CVE-2011-3952).
+
+Distributors and system integrators are encouraged to update and share
+their patches against this branch. For a full list of changes please see
+the Changelog file or the Git commit history.
+
+
+
+* 0.5.11 Feb 17, 2013
+
+General notes
+-------------
+
+This maintenance-only release addresses a number of bugs such as
+security and compilation issues that have been brought to our
+attention. Among other fixes, this release includes security updates for
+the mpeg12 codecs (CVE-2012-2803), H.264, VP5/VP6 (CVE-2012-2783,
+CVE-2012-2783), shorten (CVE-2012-0858), CAVS (CVE-2012-2777 and
+CVE-2012-2784), AVS (CVE-2012-2801) and a number of additional safe but
+important bugs in other decoders. Additionally, reported bugs in the
+yuv4mpeg (Bug 373) and BMP decoder (Bug 367) have been addressed.
+
+Distributors and system integrators are encouraged to update and share
+their patches against this branch. For a full list of changes please
+see the Changelog file or the Git commit history.

VERSION

@@ -1 +1 @@
-0.10.2
+0.5.11

cmdutils.h

@@ -22,17 +22,11 @@
 #ifndef FFMPEG_CMDUTILS_H
 #define FFMPEG_CMDUTILS_H
 
-#include <stdint.h>
-
+#include <inttypes.h>
 #include "libavcodec/avcodec.h"
-#include "libavfilter/avfilter.h"
 #include "libavformat/avformat.h"
 #include "libswscale/swscale.h"
 
-#ifdef __MINGW32__
-#undef main /* We don't want SDL to override our main() */
-#endif
-
 /**
  * program name, defined by the program for show_version().
  */
@@ -43,32 +37,12 @@ extern const char program_name[];
  */
 extern const int program_birth_year;
 
-/**
- * this year, defined by the program for show_banner()
- */
 extern const int this_year;
 
-extern AVCodecContext *avcodec_opts[AVMEDIA_TYPE_NB];
+extern const char **opt_names;
+extern AVCodecContext *avctx_opts[CODEC_TYPE_NB];
 extern AVFormatContext *avformat_opts;
 extern struct SwsContext *sws_opts;
-extern AVDictionary *format_opts, *codec_opts;
-
-/**
- * Initialize the cmdutils option system, in particular
- * allocate the *_opts contexts.
- */
-void init_opts(void);
-/**
- * Uninitialize the cmdutils option system, in particular
- * free the *_opts contexts and their contents.
- */
-void uninit_opts(void);
-
-/**
- * Trivial log callback.
- * Only suitable for opt_help and similar since it lacks prefix handling.
- */
-void log_callback_help(void* ptr, int level, const char* fmt, va_list vl);
 
 /**
  * Fallback for options that are not explicitly handled, these will be
@@ -77,64 +51,35 @@ void log_callback_help(void* ptr, int level, const char* fmt, va_list vl);
 int opt_default(const char *opt, const char *arg);
 
 /**
- * Set the libav* libraries log level.
- */
-int opt_loglevel(const char *opt, const char *arg);
-
-int opt_report(const char *opt);
-
-int opt_max_alloc(const char *opt, const char *arg);
-
-int opt_codec_debug(const char *opt, const char *arg);
-
-/**
- * Limit the execution time.
- */
-int opt_timelimit(const char *opt, const char *arg);
-
-/**
- * Parse a string and return its corresponding value as a double.
- * Exit from the application if the string cannot be correctly
+ * Parses a string and returns its corresponding value as a double.
+ * Exits from the application if the string cannot be correctly
  * parsed or the corresponding value is invalid.
  *
  * @param context the context of the value to be set (e.g. the
- * corresponding command line option name)
+ * corresponding commandline option name)
  * @param numstr the string to be parsed
  * @param type the type (OPT_INT64 or OPT_FLOAT) as which the
  * string should be parsed
  * @param min the minimum valid accepted value
  * @param max the maximum valid accepted value
  */
-double parse_number_or_die(const char *context, const char *numstr, int type,
-                           double min, double max);
+double parse_number_or_die(const char *context, const char *numstr, int type, double min, double max);
 
 /**
- * Parse a string specifying a time and return its corresponding
- * value as a number of microseconds. Exit from the application if
+ * Parses a string specifying a time and returns its corresponding
+ * value as a number of microseconds. Exits from the application if
  * the string cannot be correctly parsed.
  *
  * @param context the context of the value to be set (e.g. the
- * corresponding command line option name)
+ * corresponding commandline option name)
  * @param timestr the string to be parsed
- * @param is_duration a flag which tells how to interpret timestr, if
- * not zero timestr is interpreted as a duration, otherwise as a
+ * @param is_duration a flag which tells how to interpret \p timestr, if
+ * not zero \p timestr is interpreted as a duration, otherwise as a
  * date
  *
  * @see parse_date()
  */
-int64_t parse_time_or_die(const char *context, const char *timestr,
-                          int is_duration);
-
-typedef struct SpecifierOpt {
-    char *specifier;    /**< stream/chapter/program/... specifier */
-    union {
-        uint8_t *str;
-        int        i;
-        int64_t  i64;
-        float      f;
-        double   dbl;
-    } u;
-} SpecifierOpt;
+int64_t parse_time_or_die(const char *context, const char *timestr, int is_duration);
 
 typedef struct {
     const char *name;
@@ -149,232 +94,62 @@ typedef struct {
 #define OPT_INT    0x0080
 #define OPT_FLOAT  0x0100
 #define OPT_SUBTITLE 0x0200
-#define OPT_INT64  0x0400
-#define OPT_EXIT   0x0800
-#define OPT_DATA   0x1000
-#define OPT_FUNC2  0x2000
-#define OPT_OFFSET 0x4000       /* option is specified as an offset in a passed optctx */
-#define OPT_SPEC   0x8000       /* option is to be stored in an array of SpecifierOpt.
-                                   Implies OPT_OFFSET. Next element after the offset is
-                                   an int containing element count in the array. */
-#define OPT_TIME  0x10000
-#define OPT_DOUBLE 0x20000
+#define OPT_FUNC2  0x0400
+#define OPT_INT64  0x0800
+#define OPT_EXIT   0x1000
      union {
-        void *dst_ptr;
-        int (*func_arg)(const char *, const char *);
-        int (*func2_arg)(void *, const char *, const char *);
-        size_t off;
+        void (*func_arg)(const char *); //FIXME passing error code as int return would be nicer then exit() in the func
+        int *int_arg;
+        char **str_arg;
+        float *float_arg;
+        int (*func2_arg)(const char *, const char *);
+        int64_t *int64_arg;
     } u;
     const char *help;
     const char *argname;
 } OptionDef;
 
-void show_help_options(const OptionDef *options, const char *msg, int mask,
-                       int value);
+void show_help_options(const OptionDef *options, const char *msg, int mask, int value);
 
 /**
- * Show help for all options with given flags in class and all its
- * children.
- */
-void show_help_children(const AVClass *class, int flags);
-
-/**
- * Parse the command line arguments.
- *
- * @param optctx an opaque options context
+ * Parses the command line arguments.
  * @param options Array with the definitions required to interpret every
- * option of the form: -option_name [argument]
+ * option of the form: -<option_name> [<argument>]
  * @param parse_arg_function Name of the function called to process every
  * argument without a leading option name flag. NULL if such arguments do
  * not have to be processed.
  */
-void parse_options(void *optctx, int argc, char **argv, const OptionDef *options,
-                   void (* parse_arg_function)(void *optctx, const char*));
+void parse_options(int argc, char **argv, const OptionDef *options,
+                   void (* parse_arg_function)(const char*));
 
-/**
- * Parse one given option.
- *
- * @return on success 1 if arg was consumed, 0 otherwise; negative number on error
- */
-int parse_option(void *optctx, const char *opt, const char *arg,
-                 const OptionDef *options);
+void set_context_opts(void *ctx, void *opts_ctx, int flags);
 
-/**
- * Find the '-loglevel' option in the command line args and apply it.
- */
-void parse_loglevel(int argc, char **argv, const OptionDef *options);
-
-/**
- * Check if the given stream matches a stream specifier.
- *
- * @param s  Corresponding format context.
- * @param st Stream from s to be checked.
- * @param spec A stream specifier of the [v|a|s|d]:[\<stream index\>] form.
- *
- * @return 1 if the stream matches, 0 if it doesn't, <0 on error
- */
-int check_stream_specifier(AVFormatContext *s, AVStream *st, const char *spec);
-
-/**
- * Filter out options for given codec.
- *
- * Create a new options dictionary containing only the options from
- * opts which apply to the codec with ID codec_id.
- *
- * @param s Corresponding format context.
- * @param st A stream from s for which the options should be filtered.
- * @return a pointer to the created dictionary
- */
-AVDictionary *filter_codec_opts(AVDictionary *opts, AVCodec *codec,
-                                AVFormatContext *s, AVStream *st);
-
-/**
- * Setup AVCodecContext options for avformat_find_stream_info().
- *
- * Create an array of dictionaries, one dictionary for each stream
- * contained in s.
- * Each dictionary will contain the options from codec_opts which can
- * be applied to the corresponding stream codec context.
- *
- * @return pointer to the created array of dictionaries, NULL if it
- * cannot be created
- */
-AVDictionary **setup_find_stream_info_opts(AVFormatContext *s,
-                                           AVDictionary *codec_opts);
-
-/**
- * Print an error message to stderr, indicating filename and a human
- * readable description of the error code err.
- *
- * If strerror_r() is not available the use of this function in a
- * multithreaded application may be unsafe.
- *
- * @see av_strerror()
- */
 void print_error(const char *filename, int err);
 
 /**
- * Print the program banner to stderr. The banner contents depend on the
+ * Prints the program banner to stderr. The banner contents depend on the
  * current version of the repository and of the libav* libraries used by
  * the program.
  */
-void show_banner(int argc, char **argv, const OptionDef *options);
+void show_banner(void);
 
 /**
- * Print the version of the program to stdout. The version message
+ * Prints the version of the program to stdout. The version message
  * depends on the current versions of the repository and of the libav*
  * libraries.
- * This option processing function does not utilize the arguments.
  */
-int opt_version(const char *opt, const char *arg);
+void show_version(void);
 
 /**
- * Print the license of the program to stdout. The license depends on
+ * Prints the license of the program to stdout. The license depends on
  * the license of the libraries compiled into the program.
- * This option processing function does not utilize the arguments.
  */
-int opt_license(const char *opt, const char *arg);
+void show_license(void);
 
 /**
- * Print a listing containing all the formats supported by the
- * program.
- * This option processing function does not utilize the arguments.
- */
-int opt_formats(const char *opt, const char *arg);
-
-/**
- * Print a listing containing all the codecs supported by the
- * program.
- * This option processing function does not utilize the arguments.
- */
-int opt_codecs(const char *opt, const char *arg);
-
-/**
- * Print a listing containing all the filters supported by the
- * program.
- * This option processing function does not utilize the arguments.
- */
-int opt_filters(const char *opt, const char *arg);
-
-/**
- * Print a listing containing all the bit stream filters supported by the
- * program.
- * This option processing function does not utilize the arguments.
- */
-int opt_bsfs(const char *opt, const char *arg);
-
-/**
- * Print a listing containing all the protocols supported by the
- * program.
- * This option processing function does not utilize the arguments.
- */
-int opt_protocols(const char *opt, const char *arg);
-
-/**
- * Print a listing containing all the pixel formats supported by the
- * program.
- * This option processing function does not utilize the arguments.
- */
-int opt_pix_fmts(const char *opt, const char *arg);
-
-/**
- * Print a listing containing all the sample formats supported by the
+ * Prints a listing containing all the formats supported by the
  * program.
  */
-int show_sample_fmts(const char *opt, const char *arg);
+void show_formats(void);
 
-/**
- * Return a positive value if a line read from standard input
- * starts with [yY], otherwise return 0.
- */
-int read_yesno(void);
-
-/**
- * Read the file with name filename, and put its content in a newly
- * allocated 0-terminated buffer.
- *
- * @param bufptr location where pointer to buffer is returned
- * @param size   location where size of buffer is returned
- * @return 0 in case of success, a negative value corresponding to an
- * AVERROR error code in case of failure.
- */
-int cmdutils_read_file(const char *filename, char **bufptr, size_t *size);
-
-/**
- * Get a file corresponding to a preset file.
- *
- * If is_path is non-zero, look for the file in the path preset_name.
- * Otherwise search for a file named arg.ffpreset in the directories
- * $FFMPEG_DATADIR (if set), $HOME/.ffmpeg, and in the datadir defined
- * at configuration time or in a "ffpresets" folder along the executable
- * on win32, in that order. If no such file is found and
- * codec_name is defined, then search for a file named
- * codec_name-preset_name.ffpreset in the above-mentioned directories.
- *
- * @param filename buffer where the name of the found filename is written
- * @param filename_size size in bytes of the filename buffer
- * @param preset_name name of the preset to search
- * @param is_path tell if preset_name is a filename path
- * @param codec_name name of the codec for which to look for the
- * preset, may be NULL
- */
-FILE *get_preset_file(char *filename, size_t filename_size,
-                      const char *preset_name, int is_path, const char *codec_name);
-
-/**
- * Do all the necessary cleanup and abort.
- * This function is implemented in the avtools, not cmdutils.
- */
-void exit_program(int ret);
-
-/**
- * Realloc array to hold new_size elements of elem_size.
- * Calls exit_program() on failure.
- *
- * @param elem_size size in bytes of each element
- * @param size new element count will be written here
- * @return reallocated array
- */
-void *grow_array(void *array, int elem_size, int *size, int new_size);
-
-#endif /* CMDUTILS_H */
+#endif /* FFMPEG_CMDUTILS_H */

cmdutils_common_opts.h

@@ -1,18 +0,0 @@
-    { "L", OPT_EXIT, {(void*)opt_license}, "show license" },
-    { "h", OPT_EXIT, {(void*)opt_help}, "show help" },
-    { "?", OPT_EXIT, {(void*)opt_help}, "show help" },
-    { "help", OPT_EXIT, {(void*)opt_help}, "show help" },
-    { "-help", OPT_EXIT, {(void*)opt_help}, "show help" },
-    { "version", OPT_EXIT, {(void*)opt_version}, "show version" },
-    { "formats"  , OPT_EXIT, {(void*)opt_formats  }, "show available formats" },
-    { "codecs"   , OPT_EXIT, {(void*)opt_codecs   }, "show available codecs" },
-    { "bsfs"     , OPT_EXIT, {(void*)opt_bsfs     }, "show available bit stream filters" },
-    { "protocols", OPT_EXIT, {(void*)opt_protocols}, "show available protocols" },
-    { "filters",   OPT_EXIT, {(void*)opt_filters  }, "show available filters" },
-    { "pix_fmts" , OPT_EXIT, {(void*)opt_pix_fmts }, "show available pixel formats" },
-    { "sample_fmts", OPT_EXIT, {.func_arg = show_sample_fmts }, "show available audio sample formats" },
-    { "loglevel", HAS_ARG, {(void*)opt_loglevel}, "set libav* logging level", "loglevel" },
-    { "v", HAS_ARG, {(void*)opt_loglevel}, "set libav* logging level", "loglevel" },
-    { "debug", HAS_ARG, {(void*)opt_codec_debug}, "set debug flags", "flags" },
-    { "report", 0, {(void*)opt_report}, "generate a report" },
-    { "max_alloc", HAS_ARG, {(void*)opt_max_alloc}, "set maximum size of a single allocated block", "bytes" },

common.mak

@@ -2,119 +2,116 @@
 # common bits used by all libraries
 #
 
-# first so "all" becomes default target
-all: all-yes
+all: # make "all" default target
 
 ifndef SUBDIR
+vpath %.c $(SRC_DIR)
+vpath %.h $(SRC_DIR)
+vpath %.S $(SRC_DIR)
+vpath %.asm $(SRC_DIR)
+vpath %.v   $(SRC_DIR)
 
-ifndef V
-Q      = @
-ECHO   = printf "$(1)\t%s\n" $(2)
-BRIEF  = CC CXX AS YASM AR LD HOSTCC STRIP CP
-SILENT = DEPCC YASMDEP RM RANLIB
-MSG    = $@
-M      = @$(call ECHO,$(TAG),$@);
-$(foreach VAR,$(BRIEF), \
-    $(eval override $(VAR) = @$$(call ECHO,$(VAR),$$(MSG)); $($(VAR))))
-$(foreach VAR,$(SILENT),$(eval override $(VAR) = @$($(VAR))))
-$(eval INSTALL = @$(call ECHO,INSTALL,$$(^:$(SRC_DIR)/%=%)); $(INSTALL))
+ifeq ($(SRC_DIR),$(SRC_PATH_BARE))
+BUILD_ROOT_REL = .
+else
+BUILD_ROOT_REL = ..
 endif
 
-ALLFFLIBS = avcodec avdevice avfilter avformat avutil postproc swscale swresample
+ALLFFLIBS = avcodec avdevice avfilter avformat avutil postproc swscale
 
-# NASM requires -I path terminated with /
-IFLAGS     := -I. -I$(SRC_PATH)/
-CPPFLAGS   := $(IFLAGS) $(CPPFLAGS)
-CFLAGS     += $(ECFLAGS)
-CCFLAGS     = $(CFLAGS)
-CXXFLAGS   := $(CFLAGS) $(CXXFLAGS)
-YASMFLAGS  += $(IFLAGS) -I$(SRC_PATH)/libavutil/x86/ -Pconfig.asm
-HOSTCFLAGS += $(IFLAGS)
-LDFLAGS    := $(ALLFFLIBS:%=-Llib%) $(LDFLAGS)
-
-define COMPILE
-       $($(1)DEP)
-       $($(1)) $(CPPFLAGS) $($(1)FLAGS) $($(1)_DEPFLAGS) -c $($(1)_O) $<
-endef
-
-COMPILE_C = $(call COMPILE,CC)
-COMPILE_CXX = $(call COMPILE,CXX)
-COMPILE_S = $(call COMPILE,AS)
+CFLAGS := -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE \
+          -I$(BUILD_ROOT_REL) -I$(SRC_PATH) $(OPTFLAGS)
 
 %.o: %.c
-	$(COMPILE_C)
-
-%.o: %.cpp
-	$(COMPILE_CXX)
-
-%.s: %.c
-	$(CC) $(CPPFLAGS) $(CFLAGS) -S -o $@ $<
+	$(CC) $(CFLAGS) $(LIBOBJFLAGS) -c -o $@ $<
 
 %.o: %.S
-	$(COMPILE_S)
+	$(CC) $(CFLAGS) $(LIBOBJFLAGS) -c -o $@ $<
 
 %.ho: %.h
-	$(CC) $(CPPFLAGS) $(CFLAGS) -Wno-unused -c -o $@ -x c $<
+	$(CC) $(CFLAGS) $(LIBOBJFLAGS) -Wno-unused -c -o $@ -x c $<
+
+%.d: %.c
+	$(DEPEND_CMD) > $@
+
+%.d: %.S
+	$(DEPEND_CMD) > $@
+
+%.d: %.cpp
+	$(DEPEND_CMD) > $@
+
+%.o: %.d
+
+%$(EXESUF): %.c
 
 %.ver: %.v
-	$(Q)sed 's/$$MAJOR/$($(basename $(@F))_VERSION_MAJOR)/' $^ > $@
+	sed 's/$$MAJOR/$($(basename $(@F))_VERSION_MAJOR)/' $^ > $@
 
-%.c %.h: TAG = GEN
-
-# Dummy rule to stop make trying to rebuild removed or renamed headers
-%.h:
-	@:
-
-# Disable suffix rules.  Most of the builtin rules are suffix rules,
-# so this saves some time on slow systems.
-.SUFFIXES:
-
-# Do not delete intermediate files from chains of implicit rules
-$(OBJS):
+SVN_ENTRIES = $(SRC_PATH_BARE)/.svn/entries
+ifeq ($(wildcard $(SVN_ENTRIES)),$(SVN_ENTRIES))
+$(BUILD_ROOT_REL)/version.h: $(SVN_ENTRIES)
 endif
 
-OBJS-$(HAVE_MMX) +=  $(MMX-OBJS-yes)
+$(BUILD_ROOT_REL)/version.h: $(SRC_PATH_BARE)/version.sh
+	$< $(SRC_PATH) $@ $(EXTRA_VERSION)
 
-OBJS      += $(OBJS-yes)
-FFLIBS    := $(FFLIBS-yes) $(FFLIBS)
-TESTPROGS += $(TESTPROGS-yes)
+install: install-libs install-headers
 
-FFEXTRALIBS := $(FFLIBS:%=-l%$(BUILDSUF)) $(EXTRALIBS)
+uninstall: uninstall-libs uninstall-headers
 
-EXAMPLES  := $(EXAMPLES:%=$(SUBDIR)%-example$(EXESUF))
-OBJS      := $(sort $(OBJS:%=$(SUBDIR)%))
-TESTOBJS  := $(TESTOBJS:%=$(SUBDIR)%) $(TESTPROGS:%=$(SUBDIR)%-test.o)
-TESTPROGS := $(TESTPROGS:%=$(SUBDIR)%-test$(EXESUF))
-HOSTOBJS  := $(HOSTPROGS:%=$(SUBDIR)%.o)
-HOSTPROGS := $(HOSTPROGS:%=$(SUBDIR)%$(HOSTEXESUF))
-TOOLS     += $(TOOLS-yes)
-TOOLOBJS  := $(TOOLS:%=tools/%.o)
-TOOLS     := $(TOOLS:%=tools/%$(EXESUF))
+.PHONY: all depend dep clean distclean install* uninstall* tests
+endif
 
-DEP_LIBS := $(foreach NAME,$(FFLIBS),lib$(NAME)/$($(CONFIG_SHARED:yes=S)LIBNAME))
+CFLAGS   += $(CFLAGS-yes)
+OBJS     += $(OBJS-yes)
+FFLIBS   := $(FFLIBS-yes) $(FFLIBS)
+TESTS    += $(TESTS-yes)
+
+FFEXTRALIBS := $(addprefix -l,$(addsuffix $(BUILDSUF),$(FFLIBS))) $(EXTRALIBS)
+FFLDFLAGS   := $(addprefix -L$(BUILD_ROOT)/lib,$(FFLIBS)) $(LDFLAGS)
+
+OBJS  := $(addprefix $(SUBDIR),$(OBJS))
+TESTS := $(addprefix $(SUBDIR),$(TESTS))
+
+DEP_LIBS:=$(foreach NAME,$(FFLIBS),lib$(NAME)/$($(BUILD_SHARED:yes=S)LIBNAME))
 
 ALLHEADERS := $(subst $(SRC_DIR)/,$(SUBDIR),$(wildcard $(SRC_DIR)/*.h $(SRC_DIR)/$(ARCH)/*.h))
-SKIPHEADERS += $(ARCH_HEADERS:%=$(ARCH)/%) $(SKIPHEADERS-)
-SKIPHEADERS := $(SKIPHEADERS:%=$(SUBDIR)%)
-checkheaders: $(filter-out $(SKIPHEADERS:.h=.ho),$(ALLHEADERS:.h=.ho))
+checkheaders: $(filter-out %_template.ho,$(ALLHEADERS:.h=.ho))
 
-alltools: $(TOOLS)
+DEPS := $(OBJS:.o=.d)
+depend dep: $(DEPS)
 
-$(HOSTOBJS): %.o: %.c
-	$(HOSTCC) $(HOSTCFLAGS) -c -o $@ $<
+CLEANSUFFIXES = *.o *~ *.ho *.ver
+LIBSUFFIXES   = *.a *.lib *.so *.so.* *.dylib *.dll *.def *.dll.a *.exp *.map
+DISTCLEANSUFFIXES = *.d *.pc
 
-$(HOSTPROGS): %$(HOSTEXESUF): %.o
-	$(HOSTCC) $(HOSTLDFLAGS) -o $@ $< $(HOSTLIBS)
+define RULES
+$(SUBDIR)%$(EXESUF): $(SUBDIR)%.o
+	$(CC) $(FFLDFLAGS) -o $$@ $$^ $(SUBDIR)$(LIBNAME) $(FFEXTRALIBS)
 
-$(OBJS):     | $(sort $(dir $(OBJS)))
-$(HOSTOBJS): | $(sort $(dir $(HOSTOBJS)))
-$(TESTOBJS): | $(sort $(dir $(TESTOBJS)))
-$(TOOLOBJS): | tools
+$(SUBDIR)%-test.o: $(SUBDIR)%.c
+	$(CC) $(CFLAGS) -DTEST -c -o $$@ $$^
 
-OBJDIRS := $(OBJDIRS) $(dir $(OBJS) $(HOSTOBJS) $(TESTOBJS))
+$(SUBDIR)%-test.o: $(SUBDIR)%-test.c
+	$(CC) $(CFLAGS) -DTEST -c -o $$@ $$^
 
-CLEANSUFFIXES     = *.d *.o *~ *.ho *.map *.ver *.gcno *.gcda
-DISTCLEANSUFFIXES = *.pc
-LIBSUFFIXES       = *.a *.lib *.so *.so.* *.dylib *.dll *.def *.dll.a *.exp
+$(SUBDIR)x86/%.o: $(SUBDIR)x86/%.asm
+	$(YASM) $(YASMFLAGS) -I $$(<D)/ -o $$@ $$<
 
--include $(wildcard $(OBJS:.o=.d) $(TESTOBJS:.o=.d))
+$(SUBDIR)x86/%.d: $(SUBDIR)x86/%.asm
+	$(YASM) $(YASMFLAGS) -I $$(<D)/ -M -o $$(@:%.d=%.o) $$< > $$@
+
+clean::
+	rm -f $(TESTS) $(addprefix $(SUBDIR),$(CLEANFILES) $(CLEANSUFFIXES) $(LIBSUFFIXES)) \
+	    $(addprefix $(SUBDIR), $(foreach suffix,$(CLEANSUFFIXES),$(addsuffix /$(suffix),$(DIRS))))
+
+distclean:: clean
+	rm -f  $(addprefix $(SUBDIR),$(DISTCLEANSUFFIXES)) \
+            $(addprefix $(SUBDIR), $(foreach suffix,$(DISTCLEANSUFFIXES),$(addsuffix /$(suffix),$(DIRS))))
+endef
+
+$(eval $(RULES))
+
+tests: $(TESTS)
+
+-include $(DEPS)

doc/Makefile

@@ -1,64 +0,0 @@
-MANPAGES    = $(PROGS-yes:%=doc/%.1)
-PODPAGES    = $(PROGS-yes:%=doc/%.pod)
-HTMLPAGES   = $(PROGS-yes:%=doc/%.html)                                 \
-              doc/developer.html                                        \
-              doc/faq.html                                              \
-              doc/fate.html                                             \
-              doc/general.html                                          \
-              doc/git-howto.html                                        \
-              doc/libavfilter.html                                      \
-              doc/platform.html                                         \
-
-TXTPAGES    = doc/fate.txt                                              \
-
-
-DOCS = $(HTMLPAGES) $(MANPAGES) $(PODPAGES)
-ifdef HAVE_MAKEINFO
-DOCS += $(TXTPAGES)
-endif
-
-all-$(CONFIG_DOC): documentation
-
-documentation: $(DOCS)
-
-TEXIDEP = awk '/^@(verbatim)?include/ { printf "$@: $(@D)/%s\n", $$2 }' <$< >$(@:%=%.d)
-
-doc/%.txt: TAG = TXT
-doc/%.txt: doc/%.texi
-	$(Q)$(TEXIDEP)
-	$(M)makeinfo --force --no-headers -o $@ $< 2>/dev/null
-
-doc/%.html: TAG = HTML
-doc/%.html: doc/%.texi $(SRC_PATH)/doc/t2h.init
-	$(Q)$(TEXIDEP)
-	$(M)texi2html -monolithic --init-file $(SRC_PATH)/doc/t2h.init --output $@ $<
-
-doc/%.pod: TAG = POD
-doc/%.pod: doc/%.texi
-	$(Q)$(TEXIDEP)
-	$(M)$(SRC_PATH)/doc/texi2pod.pl $< $@
-
-doc/%.1: TAG = MAN
-doc/%.1: doc/%.pod
-	$(M)pod2man --section=1 --center=" " --release=" " $< > $@
-
-$(DOCS): | doc
-OBJDIRS += doc
-
-install-progs-$(CONFIG_DOC): install-man
-
-install-man: $(MANPAGES)
-	$(Q)mkdir -p "$(MANDIR)/man1"
-	$(INSTALL) -m 644 $(MANPAGES) "$(MANDIR)/man1"
-
-uninstall: uninstall-man
-
-uninstall-man:
-	$(RM) $(addprefix "$(MANDIR)/man1/",$(ALLMANPAGES))
-
-clean::
-	$(RM) $(TXTPAGES) doc/*.html doc/*.pod doc/*.1 $(CLEANSUFFIXES:%=doc/%)
-
--include $(wildcard $(DOCS:%=%.d))
-
-.PHONY: documentation

doc/RELEASE_NOTES

@@ -1,49 +0,0 @@
-Release Notes
-=============
-
-* 0.10 "Freedom"  January, 2012
-
-
-General notes
--------------
-This release is binary compatible with 0.8 and 0.9.
-
-See the Changelog file for a list of significant changes. Note, there
-are many more new features and bugfixes than whats listed there.
-
-Bugreports against FFmpeg git master or the most recent FFmpeg release are
-accepted. If you are experiencing issues with any formally released version of
-FFmpeg, please try git master to check if the issue still exists. If it does,
-make your report against the development code following the usual bug reporting
-guidelines.
-
-
-API changes
------------
-
-A number of additional APIs have been introduced and some existing
-functions have been deprecated and are scheduled for removal in the next
-release. Significant API changes include:
-
-* new audio decoding API which decodes from an AVPacket to an AVFrame and
-is able to use AVCodecContext.get_buffer() in the similar way as video decoding.
-
-* new audio encoding API which encodes from an AVFrame to an AVPacket, thus
-allowing it to properly output timing information and side data.
-
-Please see the git history and the file doc/APIchanges for details.
-
-
-Other notable changes
----------------------
-
-Libavcodec and libavformat built as shared libraries now hide non-public
-symbols. This will break applications using those symbols. Possible solutions
-are, in order of preference:
-1) Try finding a way of accomplishing the same with public API.
-2) If there is no corresponding public API, but you think there should be,
-post a request on the developer mailing list or IRC channel.
-3) Finally if your program needs access to FFmpeg / libavcodec / libavformat
-internals for some special reason then the best solution is to link statically.
-
-Please see the Changelog file and git history for a more detailed list of changes.

doc/TODO

@@ -0,0 +1,90 @@
+ffmpeg TODO list:
+----------------
+
+Fabrice's TODO list: (unordered)
+-------------------
+Short term:
+
+- use AVFMTCTX_DISCARD_PKT in ffplay so that DV has a chance to work
+- add RTSP regression test (both client and server)
+- make ffserver allocate AVFormatContext
+- clean up (incompatible change, for 0.5.0):
+    * AVStream -> AVComponent
+    * AVFormatContext -> AVInputStream/AVOutputStream
+    * suppress rate_emu from AVCodecContext
+- add new float/integer audio filterting and conversion : suppress
+  CODEC_ID_PCM_xxc and use CODEC_ID_RAWAUDIO.
+- fix telecine and frame rate conversion
+
+Long term (ask me if you want to help):
+
+- commit new imgconvert API and new PIX_FMT_xxx alpha formats
+- commit new LGPL'ed float and integer-only AC3 decoder
+- add WMA integer-only decoder
+- add new MPEG4-AAC audio decoder (both integer-only and float version)
+
+Michael's TODO list: (unordered) (if anyone wanna help with sth, just ask)
+-------------------
+- optimize H264 CABAC
+- more optimizations
+- simper rate control
+
+Francois' TODO list: (unordered, without any timeframe)
+-------------------
+- test MACE decoder against the openquicktime one as suggested by A'rpi
+- BeOS audio input grabbing backend
+- BeOS video input grabbing backend
+- publish my BeOS libposix on BeBits so I can officially support ffserver :)
+- check the whole code for thread-safety (global and init stuff)
+
+Philip'a TODO list: (alphabetically ordered) (please help)
+------------------
+- Add a multi-ffm filetype so that feeds can be recorded into multiple files rather
+  than one big file.
+- Authenticated users support -- where the authentication is in the URL
+- Change ASF files so that the embedded timestamp in the frames is right rather
+  than being an offset from the start of the stream
+- Make ffm files more resilient to changes in the codec structures so that you
+  can play old ffm files.
+
+Baptiste's TODO list:
+-----------------
+- mov edit list support (AVEditList)
+- YUV 10 bit per component support "2vuy"
+- mxf muxer
+- mpeg2 non linear quantizer
+
+unassigned TODO: (unordered)
+---------------
+- use AVFrame for audio codecs too
+- rework aviobuf.c buffering strategy and fix url_fskip
+- generate optimal huffman tables for mjpeg encoding
+- fix ffserver regression tests
+- support xvids motion estimation
+- support x264s motion estimation
+- support x264s rate control
+- SNOW: non translational motion compensation
+- SNOW: more optimal quantization
+- SNOW: 4x4 block support
+- SNOW: 1/8 pel motion compensation support
+- SNOW: iterative motion estimation based on subsampled images
+- SNOW: try B frames and MCTF and see how their PSNR/bitrate/complexity behaves
+- SNOW: try to use the wavelet transformed MC-ed reference frame as context for the entropy coder
+- SNOW: think about/analyize how to make snow use multiple cpus/threads
+- SNOW: finish spec
+- FLAC: lossy encoding (viterbi and naive scalar quantization)
+- libavfilter
+- JPEG2000 decoder & encoder
+- MPEG4 GMC encoding support
+- macroblock based pixel format (better cache locality, somewhat complex, one paper claimed it faster for high res)
+- regression tests for codecs which do not have an encoder (I+P-frame bitstream in svn)
+- add support for using mplayers video filters to ffmpeg
+- H264 encoder
+- per MB ratecontrol (so VCD and such do work better)
+- write a script which iteratively changes all functions between always_inline and noinline and benchmarks the result to find the best set of inlined functions
+- convert all the non SIMD asm into small asm vs. C testcases and submit them to the gcc devels so they can improve gcc
+- generic audio mixing API
+- extract PES packetizer from PS muxer and use it for new TS muxer
+- implement automatic AVBistreamFilter activation
+- make cabac encoder use bytestream (see http://trac.videolan.org/x264/changeset/?format=diff&new=651)
+- merge imdct and windowing, the current code does considerable amounts of redundant work

doc/avtools-common-opts.texi

@@ -1,168 +0,0 @@
-All the numerical options, if not specified otherwise, accept in input
-a string representing a number, which may contain one of the
-International System number postfixes, for example 'K', 'M', 'G'.
-If 'i' is appended after the postfix, powers of 2 are used instead of
-powers of 10. The 'B' postfix multiplies the value for 8, and can be
-appended after another postfix or used alone. This allows using for
-example 'KB', 'MiB', 'G' and 'B' as postfix.
-
-Options which do not take arguments are boolean options, and set the
-corresponding value to true. They can be set to false by prefixing
-with "no" the option name, for example using "-nofoo" in the
-command line will set to false the boolean option with name "foo".
-
-@anchor{Stream specifiers}
-@section Stream specifiers
-Some options are applied per-stream, e.g. bitrate or codec. Stream specifiers
-are used to precisely specify which stream(s) does a given option belong to.
-
-A stream specifier is a string generally appended to the option name and
-separated from it by a colon. E.g. @code{-codec:a:1 ac3} option contains
-@code{a:1} stream specifer, which matches the second audio stream. Therefore it
-would select the ac3 codec for the second audio stream.
-
-A stream specifier can match several stream, the option is then applied to all
-of them. E.g. the stream specifier in @code{-b:a 128k} matches all audio
-streams.
-
-An empty stream specifier matches all streams, for example @code{-codec copy}
-or @code{-codec: copy} would copy all the streams without reencoding.
-
-Possible forms of stream specifiers are:
-@table @option
-@item @var{stream_index}
-Matches the stream with this index. E.g. @code{-threads:1 4} would set the
-thread count for the second stream to 4.
-@item @var{stream_type}[:@var{stream_index}]
-@var{stream_type} is one of: 'v' for video, 'a' for audio, 's' for subtitle,
-'d' for data and 't' for attachments. If @var{stream_index} is given, then
-matches stream number @var{stream_index} of this type. Otherwise matches all
-streams of this type.
-@item p:@var{program_id}[:@var{stream_index}]
-If @var{stream_index} is given, then matches stream number @var{stream_index} in
-program with id @var{program_id}. Otherwise matches all streams in this program.
-@end table
-@section Generic options
-
-These options are shared amongst the av* tools.
-
-@table @option
-
-@item -L
-Show license.
-
-@item -h, -?, -help, --help
-Show help.
-
-@item -version
-Show version.
-
-@item -formats
-Show available formats.
-
-The fields preceding the format names have the following meanings:
-@table @samp
-@item D
-Decoding available
-@item E
-Encoding available
-@end table
-
-@item -codecs
-Show available codecs.
-
-The fields preceding the codec names have the following meanings:
-@table @samp
-@item D
-Decoding available
-@item E
-Encoding available
-@item V/A/S
-Video/audio/subtitle codec
-@item S
-Codec supports slices
-@item D
-Codec supports direct rendering
-@item T
-Codec can handle input truncated at random locations instead of only at frame boundaries
-@end table
-
-@item -bsfs
-Show available bitstream filters.
-
-@item -protocols
-Show available protocols.
-
-@item -filters
-Show available libavfilter filters.
-
-@item -pix_fmts
-Show available pixel formats.
-
-@item -sample_fmts
-Show available sample formats.
-
-@item -loglevel @var{loglevel} | -v @var{loglevel}
-Set the logging level used by the library.
-@var{loglevel} is a number or a string containing one of the following values:
-@table @samp
-@item quiet
-@item panic
-@item fatal
-@item error
-@item warning
-@item info
-@item verbose
-@item debug
-@end table
-
-By default the program logs to stderr, if coloring is supported by the
-terminal, colors are used to mark errors and warnings. Log coloring
-can be disabled setting the environment variable
-@env{AV_LOG_FORCE_NOCOLOR} or @env{NO_COLOR}, or can be forced setting
-the environment variable @env{AV_LOG_FORCE_COLOR}.
-The use of the environment variable @env{NO_COLOR} is deprecated and
-will be dropped in a following FFmpeg version.
-
-@item -report
-Dump full command line and console output to a file named
-@code{@var{program}-@var{YYYYMMDD}-@var{HHMMSS}.log} in the current
-directory.
-This file can be useful for bug reports.
-It also implies @code{-loglevel verbose}.
-
-Note: setting the environment variable @code{FFREPORT} to any value has the
-same effect.
-
-@end table
-
-@section AVOptions
-
-These options are provided directly by the libavformat, libavdevice and
-libavcodec libraries. To see the list of available AVOptions, use the
-@option{-help} option. They are separated into two categories:
-@table @option
-@item generic
-These options can be set for any container, codec or device. Generic options
-are listed under AVFormatContext options for containers/devices and under
-AVCodecContext options for codecs.
-@item private
-These options are specific to the given container, device or codec. Private
-options are listed under their corresponding containers/devices/codecs.
-@end table
-
-For example to write an ID3v2.3 header instead of a default ID3v2.4 to
-an MP3 file, use the @option{id3v2_version} private option of the MP3
-muxer:
-@example
-ffmpeg -i input.flac -id3v2_version 3 out.mp3
-@end example
-
-All codec AVOptions are obviously per-stream, so the chapter on stream
-specifiers applies to them
-
-Note @option{-nooption} syntax cannot be used for boolean AVOptions,
-use @option{-option 0}/@option{-option 1}.
-
-Note2 old undocumented way of specifying per-stream AVOptions by prepending
-v/a/s to the options name is now obsolete and will be removed soon.

doc/avutil.txt

@@ -19,6 +19,7 @@ integer.c               128bit integer math
 lls.c
 mathematics.c           greatest common divisor, integer sqrt, integer log2, ...
 mem.c                   memory allocation routines with guaranteed alignment
+softfloat.c
 
 Headers:
 bswap.h                 big/little/native-endian conversion code

doc/bitstream_filters.texi

@@ -1,91 +0,0 @@
-@chapter Bitstream Filters
-@c man begin BITSTREAM FILTERS
-
-When you configure your FFmpeg build, all the supported bitstream
-filters are enabled by default. You can list all available ones using
-the configure option @code{--list-bsfs}.
-
-You can disable all the bitstream filters using the configure option
-@code{--disable-bsfs}, and selectively enable any bitstream filter using
-the option @code{--enable-bsf=BSF}, or you can disable a particular
-bitstream filter using the option @code{--disable-bsf=BSF}.
-
-The option @code{-bsfs} of the ff* tools will display the list of
-all the supported bitstream filters included in your build.
-
-Below is a description of the currently available bitstream filters.
-
-@section aac_adtstoasc
-
-@section chomp
-
-@section dump_extradata
-
-@section h264_mp4toannexb
-
-Convert an H.264 bitstream from length prefixed mode to start code
-prefixed mode (as defined in the Annex B of the ITU-T H.264
-specification).
-
-This is required by some streaming formats, typically the MPEG-2
-transport stream format ("mpegts").
-
-For example to remux an MP4 file containing an H.264 stream to mpegts
-format with @command{ffmpeg}, you can use the command:
-
-@example
-ffmpeg -i INPUT.mp4 -codec copy -bsf:v h264_mp4toannexb OUTPUT.ts
-@end example
-
-@section imx_dump_header
-
-@section mjpeg2jpeg
-
-Convert MJPEG/AVI1 packets to full JPEG/JFIF packets.
-
-MJPEG is a video codec wherein each video frame is essentially a
-JPEG image. The individual frames can be extracted without loss,
-e.g. by
-
-@example
-ffmpeg -i ../some_mjpeg.avi -c:v copy frames_%d.jpg
-@end example
-
-Unfortunately, these chunks are incomplete JPEG images, because
-they lack the DHT segment required for decoding. Quoting from
-@url{http://www.digitalpreservation.gov/formats/fdd/fdd000063.shtml}:
-
-Avery Lee, writing in the rec.video.desktop newsgroup in 2001,
-commented that "MJPEG, or at least the MJPEG in AVIs having the
-MJPG fourcc, is restricted JPEG with a fixed -- and *omitted* --
-Huffman table. The JPEG must be YCbCr colorspace, it must be 4:2:2,
-and it must use basic Huffman encoding, not arithmetic or
-progressive. . . . You can indeed extract the MJPEG frames and
-decode them with a regular JPEG decoder, but you have to prepend
-the DHT segment to them, or else the decoder won't have any idea
-how to decompress the data. The exact table necessary is given in
-the OpenDML spec."
-
-This bitstream filter patches the header of frames extracted from an MJPEG
-stream (carrying the AVI1 header ID and lacking a DHT segment) to
-produce fully qualified JPEG images.
-
-@example
-ffmpeg -i mjpeg-movie.avi -c:v copy -vbsf mjpeg2jpeg frame_%d.jpg
-exiftran -i -9 frame*.jpg
-ffmpeg -i frame_%d.jpg -c:v copy rotated.avi
-@end example
-
-@section mjpega_dump_header
-
-@section movsub
-
-@section mp3_header_compress
-
-@section mp3_header_decompress
-
-@section noise
-
-@section remove_extradata
-
-@c man end BITSTREAM FILTERS

doc/build_system.txt

@@ -1,50 +0,0 @@
-FFmpeg currently uses a custom build system, this text attempts to document
-some of its obscure features and options.
-
-Makefile variables:
-
-V
-    Disable the default terse mode, the full command issued by make and its
-    output will be shown on the screen.
-
-DESTDIR
-    Destination directory for the install targets, useful to prepare packages
-    or install FFmpeg in cross-environments.
-
-Makefile targets:
-
-all
-    Default target, builds all the libraries and the executables.
-
-fate
-    Run the fate test suite, note you must have installed it
-
-fate-list
-    Will list all fate/regression test targets
-
-install
-    Install headers, libraries and programs.
-
-libavformat/output-example
-    Build the libavformat basic example.
-
-libavcodec/api-example
-    Build the libavcodec basic example.
-
-libswscale/swscale-test
-    Build the swscale self-test (useful also as example).
-
-
-Useful standard make commands:
-make -t <target>
-    Touch all files that otherwise would be build, this is useful to reduce
-    unneeded rebuilding when changing headers, but note you must force rebuilds
-    of files that actually need it by hand then.
-
-make -j<num>
-    rebuild with multiple jobs at the same time. Faster on multi processor systems
-
-make -k
-    continue build in case of errors, this is useful for the regression tests
-    sometimes but note it will still not run all reg tests.
-

doc/decoders.texi

@@ -1,63 +0,0 @@
-@chapter Decoders
-@c man begin DECODERS
-
-Decoders are configured elements in FFmpeg which allow the decoding of
-multimedia streams.
-
-When you configure your FFmpeg build, all the supported native decoders
-are enabled by default. Decoders requiring an external library must be enabled
-manually via the corresponding @code{--enable-lib} option. You can list all
-available decoders using the configure option @code{--list-decoders}.
-
-You can disable all the decoders with the configure option
-@code{--disable-decoders} and selectively enable / disable single decoders
-with the options @code{--enable-decoder=@var{DECODER}} /
-@code{--disable-decoder=@var{DECODER}}.
-
-The option @code{-codecs} of the ff* tools will display the list of
-enabled decoders.
-
-@c man end DECODERS
-
-@chapter Video Decoders
-@c man begin VIDEO DECODERS
-
-A description of some of the currently available video decoders
-follows.
-
-@section rawvideo
-
-Raw video decoder.
-
-This decoder decodes rawvideo streams.
-
-@subsection Options
-
-@table @option
-@item top @var{top_field_first}
-Specify the assumed field type of the input video.
-@table @option
-@item -1
-the video is assumed to be progressive (default)
-@item 0
-bottom-field-first is assumed
-@item 1
-top-field-first is assumed
-@end table
-
-@end table
-
-@c man end VIDEO DECODERS
-
-@chapter Audio Decoders
-@c man begin AUDIO DECODERS
-
-@section ffwavesynth
-
-Internal wave synthetizer.
-
-This decoder generates wave patterns according to predefined sequences. Its
-use is purely internal and the format of the data it accepts is not publicly
-documented.
-
-@c man end AUDIO DECODERS

doc/demuxers.texi

@@ -1,108 +0,0 @@
-@chapter Demuxers
-@c man begin DEMUXERS
-
-Demuxers are configured elements in FFmpeg which allow to read the
-multimedia streams from a particular type of file.
-
-When you configure your FFmpeg build, all the supported demuxers
-are enabled by default. You can list all available ones using the
-configure option "--list-demuxers".
-
-You can disable all the demuxers using the configure option
-"--disable-demuxers", and selectively enable a single demuxer with
-the option "--enable-demuxer=@var{DEMUXER}", or disable it
-with the option "--disable-demuxer=@var{DEMUXER}".
-
-The option "-formats" of the ff* tools will display the list of
-enabled demuxers.
-
-The description of some of the currently available demuxers follows.
-
-@section image2
-
-Image file demuxer.
-
-This demuxer reads from a list of image files specified by a pattern.
-
-The pattern may contain the string "%d" or "%0@var{N}d", which
-specifies the position of the characters representing a sequential
-number in each filename matched by the pattern. If the form
-"%d0@var{N}d" is used, the string representing the number in each
-filename is 0-padded and @var{N} is the total number of 0-padded
-digits representing the number. The literal character '%' can be
-specified in the pattern with the string "%%".
-
-If the pattern contains "%d" or "%0@var{N}d", the first filename of
-the file list specified by the pattern must contain a number
-inclusively contained between 0 and 4, all the following numbers must
-be sequential. This limitation may be hopefully fixed.
-
-The pattern may contain a suffix which is used to automatically
-determine the format of the images contained in the files.
-
-For example the pattern "img-%03d.bmp" will match a sequence of
-filenames of the form @file{img-001.bmp}, @file{img-002.bmp}, ...,
-@file{img-010.bmp}, etc.; the pattern "i%%m%%g-%d.jpg" will match a
-sequence of filenames of the form @file{i%m%g-1.jpg},
-@file{i%m%g-2.jpg}, ..., @file{i%m%g-10.jpg}, etc.
-
-The size, the pixel format, and the format of each image must be the
-same for all the files in the sequence.
-
-The following example shows how to use @command{ffmpeg} for creating a
-video from the images in the file sequence @file{img-001.jpeg},
-@file{img-002.jpeg}, ..., assuming an input frame rate of 10 frames per
-second:
-@example
-ffmpeg -i 'img-%03d.jpeg' -r 10 out.mkv
-@end example
-
-Note that the pattern must not necessarily contain "%d" or
-"%0@var{N}d", for example to convert a single image file
-@file{img.jpeg} you can employ the command:
-@example
-ffmpeg -i img.jpeg img.png
-@end example
-
-@section applehttp
-
-Apple HTTP Live Streaming demuxer.
-
-This demuxer presents all AVStreams from all variant streams.
-The id field is set to the bitrate variant index number. By setting
-the discard flags on AVStreams (by pressing 'a' or 'v' in ffplay),
-the caller can decide which variant streams to actually receive.
-The total bitrate of the variant that the stream belongs to is
-available in a metadata key named "variant_bitrate".
-
-@section sbg
-
-SBaGen script demuxer.
-
-This demuxer reads the script language used by SBaGen
-@url{http://uazu.net/sbagen/} to generate binaural beats sessions. A SBG
-script looks like that:
-@example
--SE
-a: 300-2.5/3 440+4.5/0
-b: 300-2.5/0 440+4.5/3
-off: -
-NOW      == a
-+0:07:00 == b
-+0:14:00 == a
-+0:21:00 == b
-+0:30:00    off
-@end example
-
-A SBG script can mix absolute and relative timestamps. If the script uses
-either only absolute timestamps (including the script start time) or only
-relative ones, then its layout is fixed, and the conversion is
-straightforward. On the other hand, if the script mixes both kind of
-timestamps, then the @var{NOW} reference for relative timestamps will be
-taken from the current time of day at the time the script is read, and the
-script layout will be frozen according to that reference. That means that if
-the script is directly played, the actual times will match the absolute
-timestamps up to the sound controller's clock accuracy, but if the user
-somehow pauses the playback or seeks, all times will be shifted accordingly.
-
-@c man end INPUT DEVICES

doc/developer.texi

@@ -1,523 +0,0 @@
-\input texinfo @c -*- texinfo -*-
-
-@settitle Developer Documentation
-@titlepage
-@center @titlefont{Developer Documentation}
-@end titlepage
-
-@top
-
-@contents
-
-@chapter Developers Guide
-
-@section API
-@itemize @bullet
-@item libavcodec is the library containing the codecs (both encoding and
-decoding). Look at @file{libavcodec/apiexample.c} to see how to use it.
-
-@item libavformat is the library containing the file format handling (mux and
-demux code for several formats). Look at @file{ffplay.c} to use it in a
-player. See @file{libavformat/output-example.c} to use it to generate
-audio or video streams.
-
-@end itemize
-
-@section Integrating libavcodec or libavformat in your program
-
-You can integrate all the source code of the libraries to link them
-statically to avoid any version problem. All you need is to provide a
-'config.mak' and a 'config.h' in the parent directory. See the defines
-generated by ./configure to understand what is needed.
-
-You can use libavcodec or libavformat in your commercial program, but
-@emph{any patch you make must be published}. The best way to proceed is
-to send your patches to the FFmpeg mailing list.
-
-@section Contributing
-
-There are 3 ways by which code gets into ffmpeg.
-@itemize @bullet
-@item Submitting Patches to the main developer mailing list
-      see @ref{Submitting patches} for details.
-@item Directly committing changes to the main tree.
-@item Committing changes to a git clone, for example on github.com or
-      gitorious.org. And asking us to merge these changes.
-@end itemize
-
-Whichever way, changes should be reviewed by the maintainer of the code
-before they are committed. And they should follow the @ref{Coding Rules}.
-The developer making the commit and the author are responsible for their changes
-and should try to fix issues their commit causes.
-
-@anchor{Coding Rules}
-@section Coding Rules
-
-@subsection Code formatting conventions
-
-There are the following guidelines regarding the indentation in files:
-@itemize @bullet
-@item
-Indent size is 4.
-@item
-The TAB character is forbidden outside of Makefiles as is any
-form of trailing whitespace. Commits containing either will be
-rejected by the git repository.
-@item
-You should try to limit your code lines to 80 characters; however, do so if
-and only if this improves readability.
-@end itemize
-The presentation is one inspired by 'indent -i4 -kr -nut'.
-
-The main priority in FFmpeg is simplicity and small code size in order to
-minimize the bug count.
-
-@subsection Comments
-Use the JavaDoc/Doxygen  format (see examples below) so that code documentation
-can be generated automatically. All nontrivial functions should have a comment
-above them explaining what the function does, even if it is just one sentence.
-All structures and their member variables should be documented, too.
-
-Avoid Qt-style and similar Doxygen syntax with @code{!} in it, i.e. replace
-@code{//!} with @code{///} and similar.  Also @@ syntax should be employed
-for markup commands, i.e. use @code{@@param} and not @code{\param}.
-
-@example
-/**
- * @@file
- * MPEG codec.
- * @@author ...
- */
-
-/**
- * Summary sentence.
- * more text ...
- * ...
- */
-typedef struct Foobar@{
-    int var1; /**< var1 description */
-    int var2; ///< var2 description
-    /** var3 description */
-    int var3;
-@} Foobar;
-
-/**
- * Summary sentence.
- * more text ...
- * ...
- * @@param my_parameter description of my_parameter
- * @@return return value description
- */
-int myfunc(int my_parameter)
-...
-@end example
-
-@subsection C language features
-
-FFmpeg is programmed in the ISO C90 language with a few additional
-features from ISO C99, namely:
-@itemize @bullet
-@item
-the @samp{inline} keyword;
-@item
-@samp{//} comments;
-@item
-designated struct initializers (@samp{struct s x = @{ .i = 17 @};})
-@item
-compound literals (@samp{x = (struct s) @{ 17, 23 @};})
-@end itemize
-
-These features are supported by all compilers we care about, so we will not
-accept patches to remove their use unless they absolutely do not impair
-clarity and performance.
-
-All code must compile with recent versions of GCC and a number of other
-currently supported compilers. To ensure compatibility, please do not use
-additional C99 features or GCC extensions. Especially watch out for:
-@itemize @bullet
-@item
-mixing statements and declarations;
-@item
-@samp{long long} (use @samp{int64_t} instead);
-@item
-@samp{__attribute__} not protected by @samp{#ifdef __GNUC__} or similar;
-@item
-GCC statement expressions (@samp{(x = (@{ int y = 4; y; @})}).
-@end itemize
-
-@subsection Naming conventions
-All names are using underscores (_), not CamelCase. For example, @samp{avfilter_get_video_buffer} is
-a valid function name and @samp{AVFilterGetVideo} is not. The exception from this are type names, like
-for example structs and enums; they should always be in the CamelCase
-
-
-There are following conventions for naming variables and functions:
-@itemize @bullet
-@item
-For local variables no prefix is required.
-@item
-For variables and functions declared as @code{static} no prefixes are required.
-@item
-For variables and functions used internally by the library, @code{ff_} prefix
-should be used.
-For example, @samp{ff_w64_demuxer}.
-@item
-For variables and functions used internally across multiple libraries, use
-@code{avpriv_}. For example, @samp{avpriv_aac_parse_header}.
-@item
-For exported names, each library has its own prefixes. Just check the existing
-code and name accordingly.
-@end itemize
-
-@subsection Miscellanous conventions
-@itemize @bullet
-@item
-fprintf and printf are forbidden in libavformat and libavcodec,
-please use av_log() instead.
-@item
-Casts should be used only when necessary. Unneeded parentheses
-should also be avoided if they don't make the code easier to understand.
-@end itemize
-
-@subsection Editor configuration
-In order to configure Vim to follow FFmpeg formatting conventions, paste
-the following snippet into your @file{.vimrc}:
-@example
-" indentation rules for FFmpeg: 4 spaces, no tabs
-set expandtab
-set shiftwidth=4
-set softtabstop=4
-" allow tabs in Makefiles
-autocmd FileType make set noexpandtab shiftwidth=8 softtabstop=8
-" Trailing whitespace and tabs are forbidden, so highlight them.
-highlight ForbiddenWhitespace ctermbg=red guibg=red
-match ForbiddenWhitespace /\s\+$\|\t/
-" Do not highlight spaces at the end of line while typing on that line.
-autocmd InsertEnter * match ForbiddenWhitespace /\t\|\s\+\%#\@@<!$/
-@end example
-
-For Emacs, add these roughly equivalent lines to your @file{.emacs.d/init.el}:
-@example
-(setq c-default-style "k&r")
-(setq-default c-basic-offset 4)
-(setq-default indent-tabs-mode nil)
-(setq-default show-trailing-whitespace t)
-@end example
-
-@section Development Policy
-
-@enumerate
-@item
-   Contributions should be licensed under the LGPL 2.1, including an
-   "or any later version" clause, or the MIT license.  GPL 2 including
-   an "or any later version" clause is also acceptable, but LGPL is
-   preferred.
-@item
-   You must not commit code which breaks FFmpeg! (Meaning unfinished but
-   enabled code which breaks compilation or compiles but does not work or
-   breaks the regression tests)
-   You can commit unfinished stuff (for testing etc), but it must be disabled
-   (#ifdef etc) by default so it does not interfere with other developers'
-   work.
-@item
-   You do not have to over-test things. If it works for you, and you think it
-   should work for others, then commit. If your code has problems
-   (portability, triggers compiler bugs, unusual environment etc) they will be
-   reported and eventually fixed.
-@item
-   Do not commit unrelated changes together, split them into self-contained
-   pieces. Also do not forget that if part B depends on part A, but A does not
-   depend on B, then A can and should be committed first and separate from B.
-   Keeping changes well split into self-contained parts makes reviewing and
-   understanding them on the commit log mailing list easier. This also helps
-   in case of debugging later on.
-   Also if you have doubts about splitting or not splitting, do not hesitate to
-   ask/discuss it on the developer mailing list.
-@item
-   Do not change behavior of the programs (renaming options etc) or public
-   API or ABI without first discussing it on the ffmpeg-devel mailing list.
-   Do not remove functionality from the code. Just improve!
-
-   Note: Redundant code can be removed.
-@item
-   Do not commit changes to the build system (Makefiles, configure script)
-   which change behavior, defaults etc, without asking first. The same
-   applies to compiler warning fixes, trivial looking fixes and to code
-   maintained by other developers. We usually have a reason for doing things
-   the way we do. Send your changes as patches to the ffmpeg-devel mailing
-   list, and if the code maintainers say OK, you may commit. This does not
-   apply to files you wrote and/or maintain.
-@item
-   We refuse source indentation and other cosmetic changes if they are mixed
-   with functional changes, such commits will be rejected and removed. Every
-   developer has his own indentation style, you should not change it. Of course
-   if you (re)write something, you can use your own style, even though we would
-   prefer if the indentation throughout FFmpeg was consistent (Many projects
-   force a given indentation style - we do not.). If you really need to make
-   indentation changes (try to avoid this), separate them strictly from real
-   changes.
-
-   NOTE: If you had to put if()@{ .. @} over a large (> 5 lines) chunk of code,
-   then either do NOT change the indentation of the inner part within (do not
-   move it to the right)! or do so in a separate commit
-@item
-   Always fill out the commit log message. Describe in a few lines what you
-   changed and why. You can refer to mailing list postings if you fix a
-   particular bug. Comments such as "fixed!" or "Changed it." are unacceptable.
-   Recommended format:
-   area changed: Short 1 line description
-
-   details describing what and why and giving references.
-@item
-   Make sure the author of the commit is set correctly. (see git commit --author)
-   If you apply a patch, send an
-   answer to ffmpeg-devel (or wherever you got the patch from) saying that
-   you applied the patch.
-@item
-   When applying patches that have been discussed (at length) on the mailing
-   list, reference the thread in the log message.
-@item
-    Do NOT commit to code actively maintained by others without permission.
-    Send a patch to ffmpeg-devel instead. If no one answers within a reasonable
-    timeframe (12h for build failures and security fixes, 3 days small changes,
-    1 week for big patches) then commit your patch if you think it is OK.
-    Also note, the maintainer can simply ask for more time to review!
-@item
-    Subscribe to the ffmpeg-cvslog mailing list. The diffs of all commits
-    are sent there and reviewed by all the other developers. Bugs and possible
-    improvements or general questions regarding commits are discussed there. We
-    expect you to react if problems with your code are uncovered.
-@item
-    Update the documentation if you change behavior or add features. If you are
-    unsure how best to do this, send a patch to ffmpeg-devel, the documentation
-    maintainer(s) will review and commit your stuff.
-@item
-    Try to keep important discussions and requests (also) on the public
-    developer mailing list, so that all developers can benefit from them.
-@item
-    Never write to unallocated memory, never write over the end of arrays,
-    always check values read from some untrusted source before using them
-    as array index or other risky things.
-@item
-    Remember to check if you need to bump versions for the specific libav*
-    parts (libavutil, libavcodec, libavformat) you are changing. You need
-    to change the version integer.
-    Incrementing the first component means no backward compatibility to
-    previous versions (e.g. removal of a function from the public API).
-    Incrementing the second component means backward compatible change
-    (e.g. addition of a function to the public API or extension of an
-    existing data structure).
-    Incrementing the third component means a noteworthy binary compatible
-    change (e.g. encoder bug fix that matters for the decoder).
-@item
-    Compiler warnings indicate potential bugs or code with bad style. If a type of
-    warning always points to correct and clean code, that warning should
-    be disabled, not the code changed.
-    Thus the remaining warnings can either be bugs or correct code.
-    If it is a bug, the bug has to be fixed. If it is not, the code should
-    be changed to not generate a warning unless that causes a slowdown
-    or obfuscates the code.
-@item
-    If you add a new file, give it a proper license header. Do not copy and
-    paste it from a random place, use an existing file as template.
-@end enumerate
-
-We think our rules are not too hard. If you have comments, contact us.
-
-Note, these rules are mostly borrowed from the MPlayer project.
-
-@anchor{Submitting patches}
-@section Submitting patches
-
-First, read the @ref{Coding Rules} above if you did not yet, in particular
-the rules regarding patch submission.
-
-When you submit your patch, please use @code{git format-patch} or
-@code{git send-email}. We cannot read other diffs :-)
-
-Also please do not submit a patch which contains several unrelated changes.
-Split it into separate, self-contained pieces. This does not mean splitting
-file by file. Instead, make the patch as small as possible while still
-keeping it as a logical unit that contains an individual change, even
-if it spans multiple files. This makes reviewing your patches much easier
-for us and greatly increases your chances of getting your patch applied.
-
-Use the patcheck tool of FFmpeg to check your patch.
-The tool is located in the tools directory.
-
-Run the @ref{Regression tests} before submitting a patch in order to verify
-it does not cause unexpected problems.
-
-Patches should be posted as base64 encoded attachments (or any other
-encoding which ensures that the patch will not be trashed during
-transmission) to the ffmpeg-devel mailing list, see
-@url{http://lists.ffmpeg.org/mailman/listinfo/ffmpeg-devel}
-
-It also helps quite a bit if you tell us what the patch does (for example
-'replaces lrint by lrintf'), and why (for example '*BSD isn't C99 compliant
-and has no lrint()')
-
-Also please if you send several patches, send each patch as a separate mail,
-do not attach several unrelated patches to the same mail.
-
-Your patch will be reviewed on the mailing list. You will likely be asked
-to make some changes and are expected to send in an improved version that
-incorporates the requests from the review. This process may go through
-several iterations. Once your patch is deemed good enough, some developer
-will pick it up and commit it to the official FFmpeg tree.
-
-Give us a few days to react. But if some time passes without reaction,
-send a reminder by email. Your patch should eventually be dealt with.
-
-
-@section New codecs or formats checklist
-
-@enumerate
-@item
-    Did you use av_cold for codec initialization and close functions?
-@item
-    Did you add a long_name under NULL_IF_CONFIG_SMALL to the AVCodec or
-    AVInputFormat/AVOutputFormat struct?
-@item
-    Did you bump the minor version number (and reset the micro version
-    number) in @file{libavcodec/version.h} or @file{libavformat/version.h}?
-@item
-    Did you register it in @file{allcodecs.c} or @file{allformats.c}?
-@item
-    Did you add the CodecID to @file{avcodec.h}?
-@item
-    If it has a fourCC, did you add it to @file{libavformat/riff.c},
-    even if it is only a decoder?
-@item
-    Did you add a rule to compile the appropriate files in the Makefile?
-    Remember to do this even if you're just adding a format to a file that is
-    already being compiled by some other rule, like a raw demuxer.
-@item
-    Did you add an entry to the table of supported formats or codecs in
-    @file{doc/general.texi}?
-@item
-    Did you add an entry in the Changelog?
-@item
-    If it depends on a parser or a library, did you add that dependency in
-    configure?
-@item
-    Did you @code{git add} the appropriate files before committing?
-@item
-    Did you make sure it compiles standalone, i.e. with
-    @code{configure --disable-everything --enable-decoder=foo}
-    (or @code{--enable-demuxer} or whatever your component is)?
-@end enumerate
-
-
-@section patch submission checklist
-
-@enumerate
-@item
-    Does @code{make fate} pass with the patch applied?
-@item
-    Was the patch generated with git format-patch or send-email?
-@item
-    Did you sign off your patch? (git commit -s)
-    See @url{http://kerneltrap.org/files/Jeremy/DCO.txt} for the meaning
-    of sign off.
-@item
-    Did you provide a clear git commit log message?
-@item
-    Is the patch against latest FFmpeg git master branch?
-@item
-    Are you subscribed to ffmpeg-devel?
-    (the list is subscribers only due to spam)
-@item
-    Have you checked that the changes are minimal, so that the same cannot be
-    achieved with a smaller patch and/or simpler final code?
-@item
-    If the change is to speed critical code, did you benchmark it?
-@item
-    If you did any benchmarks, did you provide them in the mail?
-@item
-    Have you checked that the patch does not introduce buffer overflows or
-    other security issues?
-@item
-    Did you test your decoder or demuxer against damaged data? If no, see
-    tools/trasher and the noise bitstream filter. Your decoder or demuxer
-    should not crash or end in a (near) infinite loop when fed damaged data.
-@item
-    Does the patch not mix functional and cosmetic changes?
-@item
-    Did you add tabs or trailing whitespace to the code? Both are forbidden.
-@item
-    Is the patch attached to the email you send?
-@item
-    Is the mime type of the patch correct? It should be text/x-diff or
-    text/x-patch or at least text/plain and not application/octet-stream.
-@item
-    If the patch fixes a bug, did you provide a verbose analysis of the bug?
-@item
-    If the patch fixes a bug, did you provide enough information, including
-    a sample, so the bug can be reproduced and the fix can be verified?
-    Note please do not attach samples >100k to mails but rather provide a
-    URL, you can upload to ftp://upload.ffmpeg.org
-@item
-    Did you provide a verbose summary about what the patch does change?
-@item
-    Did you provide a verbose explanation why it changes things like it does?
-@item
-    Did you provide a verbose summary of the user visible advantages and
-    disadvantages if the patch is applied?
-@item
-    Did you provide an example so we can verify the new feature added by the
-    patch easily?
-@item
-    If you added a new file, did you insert a license header? It should be
-    taken from FFmpeg, not randomly copied and pasted from somewhere else.
-@item
-    You should maintain alphabetical order in alphabetically ordered lists as
-    long as doing so does not break API/ABI compatibility.
-@item
-    Lines with similar content should be aligned vertically when doing so
-    improves readability.
-@item
-    Consider to add a regression test for your code.
-@item
-    If you added YASM code please check that things still work with --disable-yasm
-@end enumerate
-
-@section Patch review process
-
-All patches posted to ffmpeg-devel will be reviewed, unless they contain a
-clear note that the patch is not for the git master branch.
-Reviews and comments will be posted as replies to the patch on the
-mailing list. The patch submitter then has to take care of every comment,
-that can be by resubmitting a changed patch or by discussion. Resubmitted
-patches will themselves be reviewed like any other patch. If at some point
-a patch passes review with no comments then it is approved, that can for
-simple and small patches happen immediately while large patches will generally
-have to be changed and reviewed many times before they are approved.
-After a patch is approved it will be committed to the repository.
-
-We will review all submitted patches, but sometimes we are quite busy so
-especially for large patches this can take several weeks.
-
-If you feel that the review process is too slow and you are willing to try to
-take over maintainership of the area of code you change then just clone
-git master and maintain the area of code there. We will merge each area from
-where its best maintained.
-
-When resubmitting patches, please do not make any significant changes
-not related to the comments received during review. Such patches will
-be rejected. Instead, submit significant changes or new features as
-separate patches.
-
-@anchor{Regression tests}
-@section Regression tests
-
-Before submitting a patch (or committing to the repository), you should at least
-test that you did not break anything.
-
-Running 'make fate' accomplishes this, please see @url{fate.html} for details.
-
-[Of course, some patches may change the results of the regression tests. In
-this case, the reference results of the regression tests shall be modified
-accordingly].
-
-@bye

doc/doxy/footer.html

@@ -1,10 +0,0 @@
- </div>
-
- <div id="footer">
-   Generated on $datetime for $projectname by&#160;<a href="http://www.doxygen.org/index.html">doxygen</a> $doxygenversion
- </div>
-
-</div>
-
-</body>
-</html>

doc/doxy/header.html

@@ -1,14 +0,0 @@
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml">
-<head>
-<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
-<meta http-equiv="X-UA-Compatible" content="IE=9"/>
-<!--BEGIN PROJECT_NAME--><title>$projectname: $title</title><!--END PROJECT_NAME-->
-<!--BEGIN !PROJECT_NAME--><title>$title</title><!--END !PROJECT_NAME-->
-<link href="$relpath$doxy_stylesheet.css" rel="stylesheet" type="text/css" />
-</head>
-
-<div id="container">
-
-<div id="body">
- <div>

doc/encoders.texi

@@ -1,588 +0,0 @@
-@chapter Encoders
-@c man begin ENCODERS
-
-Encoders are configured elements in FFmpeg which allow the encoding of
-multimedia streams.
-
-When you configure your FFmpeg build, all the supported native encoders
-are enabled by default. Encoders requiring an external library must be enabled
-manually via the corresponding @code{--enable-lib} option. You can list all
-available encoders using the configure option @code{--list-encoders}.
-
-You can disable all the encoders with the configure option
-@code{--disable-encoders} and selectively enable / disable single encoders
-with the options @code{--enable-encoder=@var{ENCODER}} /
-@code{--disable-encoder=@var{ENCODER}}.
-
-The option @code{-codecs} of the ff* tools will display the list of
-enabled encoders.
-
-@c man end ENCODERS
-
-@chapter Audio Encoders
-@c man begin AUDIO ENCODERS
-
-A description of some of the currently available audio encoders
-follows.
-
-@section ac3 and ac3_fixed
-
-AC-3 audio encoders.
-
-These encoders implement part of ATSC A/52:2010 and ETSI TS 102 366, as well as
-the undocumented RealAudio 3 (a.k.a. dnet).
-
-The @var{ac3} encoder uses floating-point math, while the @var{ac3_fixed}
-encoder only uses fixed-point integer math. This does not mean that one is
-always faster, just that one or the other may be better suited to a
-particular system. The floating-point encoder will generally produce better
-quality audio for a given bitrate. The @var{ac3_fixed} encoder is not the
-default codec for any of the output formats, so it must be specified explicitly
-using the option @code{-acodec ac3_fixed} in order to use it.
-
-@subsection AC-3 Metadata
-
-The AC-3 metadata options are used to set parameters that describe the audio,
-but in most cases do not affect the audio encoding itself. Some of the options
-do directly affect or influence the decoding and playback of the resulting
-bitstream, while others are just for informational purposes. A few of the
-options will add bits to the output stream that could otherwise be used for
-audio data, and will thus affect the quality of the output. Those will be
-indicated accordingly with a note in the option list below.
-
-These parameters are described in detail in several publicly-available
-documents.
-@itemize
-@item @uref{http://www.atsc.org/cms/standards/a_52-2010.pdf,A/52:2010 - Digital Audio Compression (AC-3) (E-AC-3) Standard}
-@item @uref{http://www.atsc.org/cms/standards/a_54a_with_corr_1.pdf,A/54 - Guide to the Use of the ATSC Digital Television Standard}
-@item @uref{http://www.dolby.com/uploadedFiles/zz-_Shared_Assets/English_PDFs/Professional/18_Metadata.Guide.pdf,Dolby Metadata Guide}
-@item @uref{http://www.dolby.com/uploadedFiles/zz-_Shared_Assets/English_PDFs/Professional/46_DDEncodingGuidelines.pdf,Dolby Digital Professional Encoding Guidelines}
-@end itemize
-
-@subsubsection Metadata Control Options
-
-@table @option
-
-@item -per_frame_metadata @var{boolean}
-Allow Per-Frame Metadata. Specifies if the encoder should check for changing
-metadata for each frame.
-@table @option
-@item 0
-The metadata values set at initialization will be used for every frame in the
-stream. (default)
-@item 1
-Metadata values can be changed before encoding each frame.
-@end table
-
-@end table
-
-@subsubsection Downmix Levels
-
-@table @option
-
-@item -center_mixlev @var{level}
-Center Mix Level. The amount of gain the decoder should apply to the center
-channel when downmixing to stereo. This field will only be written to the
-bitstream if a center channel is present. The value is specified as a scale
-factor. There are 3 valid values:
-@table @option
-@item 0.707
-Apply -3dB gain
-@item 0.595
-Apply -4.5dB gain (default)
-@item 0.500
-Apply -6dB gain
-@end table
-
-@item -surround_mixlev @var{level}
-Surround Mix Level. The amount of gain the decoder should apply to the surround
-channel(s) when downmixing to stereo. This field will only be written to the
-bitstream if one or more surround channels are present. The value is specified
-as a scale factor.  There are 3 valid values:
-@table @option
-@item 0.707
-Apply -3dB gain
-@item 0.500
-Apply -6dB gain (default)
-@item 0.000
-Silence Surround Channel(s)
-@end table
-
-@end table
-
-@subsubsection Audio Production Information
-Audio Production Information is optional information describing the mixing
-environment.  Either none or both of the fields are written to the bitstream.
-
-@table @option
-
-@item -mixing_level @var{number}
-Mixing Level. Specifies peak sound pressure level (SPL) in the production
-environment when the mix was mastered. Valid values are 80 to 111, or -1 for
-unknown or not indicated. The default value is -1, but that value cannot be
-used if the Audio Production Information is written to the bitstream. Therefore,
-if the @code{room_type} option is not the default value, the @code{mixing_level}
-option must not be -1.
-
-@item -room_type @var{type}
-Room Type. Describes the equalization used during the final mixing session at
-the studio or on the dubbing stage. A large room is a dubbing stage with the
-industry standard X-curve equalization; a small room has flat equalization.
-This field will not be written to the bitstream if both the @code{mixing_level}
-option and the @code{room_type} option have the default values.
-@table @option
-@item 0
-@itemx notindicated
-Not Indicated (default)
-@item 1
-@itemx large
-Large Room
-@item 2
-@itemx small
-Small Room
-@end table
-
-@end table
-
-@subsubsection Other Metadata Options
-
-@table @option
-
-@item -copyright @var{boolean}
-Copyright Indicator. Specifies whether a copyright exists for this audio.
-@table @option
-@item 0
-@itemx off
-No Copyright Exists (default)
-@item 1
-@itemx on
-Copyright Exists
-@end table
-
-@item -dialnorm @var{value}
-Dialogue Normalization. Indicates how far the average dialogue level of the
-program is below digital 100% full scale (0 dBFS). This parameter determines a
-level shift during audio reproduction that sets the average volume of the
-dialogue to a preset level. The goal is to match volume level between program
-sources. A value of -31dB will result in no volume level change, relative to
-the source volume, during audio reproduction. Valid values are whole numbers in
-the range -31 to -1, with -31 being the default.
-
-@item -dsur_mode @var{mode}
-Dolby Surround Mode. Specifies whether the stereo signal uses Dolby Surround
-(Pro Logic). This field will only be written to the bitstream if the audio
-stream is stereo. Using this option does @b{NOT} mean the encoder will actually
-apply Dolby Surround processing.
-@table @option
-@item 0
-@itemx notindicated
-Not Indicated (default)
-@item 1
-@itemx off
-Not Dolby Surround Encoded
-@item 2
-@itemx on
-Dolby Surround Encoded
-@end table
-
-@item -original @var{boolean}
-Original Bit Stream Indicator. Specifies whether this audio is from the
-original source and not a copy.
-@table @option
-@item 0
-@itemx off
-Not Original Source
-@item 1
-@itemx on
-Original Source (default)
-@end table
-
-@end table
-
-@subsection Extended Bitstream Information
-The extended bitstream options are part of the Alternate Bit Stream Syntax as
-specified in Annex D of the A/52:2010 standard. It is grouped into 2 parts.
-If any one parameter in a group is specified, all values in that group will be
-written to the bitstream.  Default values are used for those that are written
-but have not been specified.  If the mixing levels are written, the decoder
-will use these values instead of the ones specified in the @code{center_mixlev}
-and @code{surround_mixlev} options if it supports the Alternate Bit Stream
-Syntax.
-
-@subsubsection Extended Bitstream Information - Part 1
-
-@table @option
-
-@item -dmix_mode @var{mode}
-Preferred Stereo Downmix Mode. Allows the user to select either Lt/Rt
-(Dolby Surround) or Lo/Ro (normal stereo) as the preferred stereo downmix mode.
-@table @option
-@item 0
-@itemx notindicated
-Not Indicated (default)
-@item 1
-@itemx ltrt
-Lt/Rt Downmix Preferred
-@item 2
-@itemx loro
-Lo/Ro Downmix Preferred
-@end table
-
-@item -ltrt_cmixlev @var{level}
-Lt/Rt Center Mix Level. The amount of gain the decoder should apply to the
-center channel when downmixing to stereo in Lt/Rt mode.
-@table @option
-@item 1.414
-Apply +3dB gain
-@item 1.189
-Apply +1.5dB gain
-@item 1.000
-Apply 0dB gain
-@item 0.841
-Apply -1.5dB gain
-@item 0.707
-Apply -3.0dB gain
-@item 0.595
-Apply -4.5dB gain (default)
-@item 0.500
-Apply -6.0dB gain
-@item 0.000
-Silence Center Channel
-@end table
-
-@item -ltrt_surmixlev @var{level}
-Lt/Rt Surround Mix Level. The amount of gain the decoder should apply to the
-surround channel(s) when downmixing to stereo in Lt/Rt mode.
-@table @option
-@item 0.841
-Apply -1.5dB gain
-@item 0.707
-Apply -3.0dB gain
-@item 0.595
-Apply -4.5dB gain
-@item 0.500
-Apply -6.0dB gain (default)
-@item 0.000
-Silence Surround Channel(s)
-@end table
-
-@item -loro_cmixlev @var{level}
-Lo/Ro Center Mix Level. The amount of gain the decoder should apply to the
-center channel when downmixing to stereo in Lo/Ro mode.
-@table @option
-@item 1.414
-Apply +3dB gain
-@item 1.189
-Apply +1.5dB gain
-@item 1.000
-Apply 0dB gain
-@item 0.841
-Apply -1.5dB gain
-@item 0.707
-Apply -3.0dB gain
-@item 0.595
-Apply -4.5dB gain (default)
-@item 0.500
-Apply -6.0dB gain
-@item 0.000
-Silence Center Channel
-@end table
-
-@item -loro_surmixlev @var{level}
-Lo/Ro Surround Mix Level. The amount of gain the decoder should apply to the
-surround channel(s) when downmixing to stereo in Lo/Ro mode.
-@table @option
-@item 0.841
-Apply -1.5dB gain
-@item 0.707
-Apply -3.0dB gain
-@item 0.595
-Apply -4.5dB gain
-@item 0.500
-Apply -6.0dB gain (default)
-@item 0.000
-Silence Surround Channel(s)
-@end table
-
-@end table
-
-@subsubsection Extended Bitstream Information - Part 2
-
-@table @option
-
-@item -dsurex_mode @var{mode}
-Dolby Surround EX Mode. Indicates whether the stream uses Dolby Surround EX
-(7.1 matrixed to 5.1). Using this option does @b{NOT} mean the encoder will actually
-apply Dolby Surround EX processing.
-@table @option
-@item 0
-@itemx notindicated
-Not Indicated (default)
-@item 1
-@itemx on
-Dolby Surround EX Off
-@item 2
-@itemx off
-Dolby Surround EX On
-@end table
-
-@item -dheadphone_mode @var{mode}
-Dolby Headphone Mode. Indicates whether the stream uses Dolby Headphone
-encoding (multi-channel matrixed to 2.0 for use with headphones). Using this
-option does @b{NOT} mean the encoder will actually apply Dolby Headphone
-processing.
-@table @option
-@item 0
-@itemx notindicated
-Not Indicated (default)
-@item 1
-@itemx on
-Dolby Headphone Off
-@item 2
-@itemx off
-Dolby Headphone On
-@end table
-
-@item -ad_conv_type @var{type}
-A/D Converter Type. Indicates whether the audio has passed through HDCD A/D
-conversion.
-@table @option
-@item 0
-@itemx standard
-Standard A/D Converter (default)
-@item 1
-@itemx hdcd
-HDCD A/D Converter
-@end table
-
-@end table
-
-@subsection Other AC-3 Encoding Options
-
-@table @option
-
-@item -stereo_rematrixing @var{boolean}
-Stereo Rematrixing. Enables/Disables use of rematrixing for stereo input. This
-is an optional AC-3 feature that increases quality by selectively encoding
-the left/right channels as mid/side. This option is enabled by default, and it
-is highly recommended that it be left as enabled except for testing purposes.
-
-@end table
-
-@subsection Floating-Point-Only AC-3 Encoding Options
-
-These options are only valid for the floating-point encoder and do not exist
-for the fixed-point encoder due to the corresponding features not being
-implemented in fixed-point.
-
-@table @option
-
-@item -channel_coupling @var{boolean}
-Enables/Disables use of channel coupling, which is an optional AC-3 feature
-that increases quality by combining high frequency information from multiple
-channels into a single channel. The per-channel high frequency information is
-sent with less accuracy in both the frequency and time domains. This allows
-more bits to be used for lower frequencies while preserving enough information
-to reconstruct the high frequencies. This option is enabled by default for the
-floating-point encoder and should generally be left as enabled except for
-testing purposes or to increase encoding speed.
-@table @option
-@item -1
-@itemx auto
-Selected by Encoder (default)
-@item 0
-@itemx off
-Disable Channel Coupling
-@item 1
-@itemx on
-Enable Channel Coupling
-@end table
-
-@item -cpl_start_band @var{number}
-Coupling Start Band. Sets the channel coupling start band, from 1 to 15. If a
-value higher than the bandwidth is used, it will be reduced to 1 less than the
-coupling end band. If @var{auto} is used, the start band will be determined by
-the encoder based on the bit rate, sample rate, and channel layout. This option
-has no effect if channel coupling is disabled.
-@table @option
-@item -1
-@itemx auto
-Selected by Encoder (default)
-@end table
-
-@end table
-
-@c man end AUDIO ENCODERS
-
-@chapter Video Encoders
-@c man begin VIDEO ENCODERS
-
-A description of some of the currently available video encoders
-follows.
-
-@section libvpx
-
-VP8 format supported through libvpx.
-
-Requires the presence of the libvpx headers and library during configuration.
-You need to explicitly configure the build with @code{--enable-libvpx}.
-
-@subsection Options
-
-Mapping from FFmpeg to libvpx options with conversion notes in parentheses.
-
-@table @option
-
-@item threads
-g_threads
-
-@item profile
-g_profile
-
-@item vb
-rc_target_bitrate
-
-@item g
-kf_max_dist
-
-@item keyint_min
-kf_min_dist
-
-@item qmin
-rc_min_quantizer
-
-@item qmax
-rc_max_quantizer
-
-@item bufsize, vb
-rc_buf_sz
-@code{(bufsize * 1000 / vb)}
-
-rc_buf_optimal_sz
-@code{(bufsize * 1000 / vb * 5 / 6)}
-
-@item rc_init_occupancy, vb
-rc_buf_initial_sz
-@code{(rc_init_occupancy * 1000 / vb)}
-
-@item rc_buffer_aggressivity
-rc_undershoot_pct
-
-@item skip_threshold
-rc_dropframe_thresh
-
-@item qcomp
-rc_2pass_vbr_bias_pct
-
-@item maxrate, vb
-rc_2pass_vbr_maxsection_pct
-@code{(maxrate * 100 / vb)}
-
-@item minrate, vb
-rc_2pass_vbr_minsection_pct
-@code{(minrate * 100 / vb)}
-
-@item minrate, maxrate, vb
-@code{VPX_CBR}
-@code{(minrate == maxrate == vb)}
-
-@item crf
-@code{VPX_CQ}, @code{VP8E_SET_CQ_LEVEL}
-
-@item quality
-@table @option
-@item @var{best}
-@code{VPX_DL_BEST_QUALITY}
-@item @var{good}
-@code{VPX_DL_GOOD_QUALITY}
-@item @var{realtime}
-@code{VPX_DL_REALTIME}
-@end table
-
-@item speed
-@code{VP8E_SET_CPUUSED}
-
-@item nr
-@code{VP8E_SET_NOISE_SENSITIVITY}
-
-@item mb_threshold
-@code{VP8E_SET_STATIC_THRESHOLD}
-
-@item slices
-@code{VP8E_SET_TOKEN_PARTITIONS}
-
-@item Alternate reference frame related
-@table @option
-@item vp8flags altref
-@code{VP8E_SET_ENABLEAUTOALTREF}
-@item @var{arnr_max_frames}
-@code{VP8E_SET_ARNR_MAXFRAMES}
-@item @var{arnr_type}
-@code{VP8E_SET_ARNR_TYPE}
-@item @var{arnr_strength}
-@code{VP8E_SET_ARNR_STRENGTH}
-@item @var{rc_lookahead}
-g_lag_in_frames
-@end table
-
-@item vp8flags error_resilient
-g_error_resilient
-
-@end table
-
-For more information about libvpx see:
-@url{http://www.webmproject.org/}
-
-@section libx264
-
-H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 format supported through
-libx264.
-
-Requires the presence of the libx264 headers and library during
-configuration. You need to explicitly configure the build with
-@code{--enable-libx264}.
-
-@subsection Options
-
-@table @option
-
-@item preset @var{preset_name}
-Set the encoding preset.
-
-@item tune @var{tune_name}
-Tune the encoding params.
-
-@item fastfirstpass @var{bool}
-Use fast settings when encoding first pass, default value is 1.
-
-@item profile @var{profile_name}
-Set profile restrictions.
-
-@item level @var{level}
-Specify level (as defined by Annex A).
-Deprecated in favor of @var{x264opts}.
-
-@item passlogfile @var{filename}
-Specify filename for 2 pass stats.
-Deprecated in favor of @var{x264opts} (see @var{stats} libx264 option).
-
-@item wpredp @var{wpred_type}
-Specify Weighted prediction for P-frames.
-Deprecated in favor of @var{x264opts} (see @var{weightp} libx264 option).
-
-@item x264opts @var{options}
-Allow to set any x264 option, see x264 --fullhelp for a list.
-
-@var{options} is a list of @var{key}=@var{value} couples separated by
-":".
-@end table
-
-For example to specify libx264 encoding options with @command{ffmpeg}:
-@example
-ffmpeg -i foo.mpg -vcodec libx264 -x264opts keyint=123:min-keyint=20 -an out.mkv
-@end example
-
-For more information about libx264 and the supported options see:
-@url{http://www.videolan.org/developers/x264.html}
-
-@c man end VIDEO ENCODERS

doc/errno.txt

@@ -1,174 +0,0 @@
-The following table lists most error codes found in various operating
-systems supported by FFmpeg.
-
-                             OS
-Code             Std    F  LBMWwb Text (YMMV)
-
-E2BIG            POSIX     ++++++  Argument list too long
-EACCES           POSIX     ++++++  Permission denied
-EADDRINUSE       POSIX     +++..+  Address in use
-EADDRNOTAVAIL    POSIX     +++..+  Cannot assign requested address
-EADV                       +.....  Advertise error
-EAFNOSUPPORT     POSIX     +++..+  Address family not supported
-EAGAIN           POSIX  +  ++++++  Resource temporarily unavailable
-EALREADY         POSIX     +++..+  Operation already in progress
-EAUTH                      .++...  Authentication error
-EBADARCH                   ..+...  Bad CPU type in executable
-EBADE                      +.....  Invalid exchange
-EBADEXEC                   ..+...  Bad executable
-EBADF            POSIX     ++++++  Bad file descriptor
-EBADFD                     +.....  File descriptor in bad state
-EBADMACHO                  ..+...  Malformed Macho file
-EBADMSG          POSIX     ++4...  Bad message
-EBADR                      +.....  Invalid request descriptor
-EBADRPC                    .++...  RPC struct is bad
-EBADRQC                    +.....  Invalid request code
-EBADSLT                    +.....  Invalid slot
-EBFONT                     +.....  Bad font file format
-EBUSY            POSIX  -  ++++++  Device or resource busy
-ECANCELED        POSIX     +++...  Operation canceled
-ECHILD           POSIX     ++++++  No child processes
-ECHRNG                     +.....  Channel number out of range
-ECOMM                      +.....  Communication error on send
-ECONNABORTED     POSIX     +++..+  Software caused connection abort
-ECONNREFUSED     POSIX  -  +++ss+  Connection refused
-ECONNRESET       POSIX     +++..+  Connection reset
-EDEADLK          POSIX     ++++++  Resource deadlock avoided
-EDEADLOCK                  +..++.  File locking deadlock error
-EDESTADDRREQ     POSIX     +++...  Destination address required
-EDEVERR                    ..+...  Device error
-EDOM             C89    -  ++++++  Numerical argument out of domain
-EDOOFUS                    .F....  Programming error
-EDOTDOT                    +.....  RFS specific error
-EDQUOT           POSIX     +++...  Disc quota exceeded
-EEXIST           POSIX     ++++++  File exists
-EFAULT           POSIX  -  ++++++  Bad address
-EFBIG            POSIX  -  ++++++  File too large
-EFTYPE                     .++...  Inappropriate file type or format
-EHOSTDOWN                  +++...  Host is down
-EHOSTUNREACH     POSIX     +++..+  No route to host
-EHWPOISON                  +.....  Memory page has hardware error
-EIDRM            POSIX     +++...  Identifier removed
-EILSEQ           C99       ++++++  Illegal byte sequence
-EINPROGRESS      POSIX  -  +++ss+  Operation in progress
-EINTR            POSIX  -  ++++++  Interrupted system call
-EINVAL           POSIX  +  ++++++  Invalid argument
-EIO              POSIX  +  ++++++  I/O error
-EISCONN          POSIX     +++..+  Socket is already connected
-EISDIR           POSIX     ++++++  Is a directory
-EISNAM                     +.....  Is a named type file
-EKEYEXPIRED                +.....  Key has expired
-EKEYREJECTED               +.....  Key was rejected by service
-EKEYREVOKED                +.....  Key has been revoked
-EL2HLT                     +.....  Level 2 halted
-EL2NSYNC                   +.....  Level 2 not synchronized
-EL3HLT                     +.....  Level 3 halted
-EL3RST                     +.....  Level 3 reset
-ELIBACC                    +.....  Can not access a needed shared library
-ELIBBAD                    +.....  Accessing a corrupted shared library
-ELIBEXEC                   +.....  Cannot exec a shared library directly
-ELIBMAX                    +.....  Too many shared libraries
-ELIBSCN                    +.....  .lib section in a.out corrupted
-ELNRNG                     +.....  Link number out of range
-ELOOP            POSIX     +++..+  Too many levels of symbolic links
-EMEDIUMTYPE                +.....  Wrong medium type
-EMFILE           POSIX     ++++++  Too many open files
-EMLINK           POSIX     ++++++  Too many links
-EMSGSIZE         POSIX     +++..+  Message too long
-EMULTIHOP        POSIX     ++4...  Multihop attempted
-ENAMETOOLONG     POSIX  -  ++++++  Filen ame too long
-ENAVAIL                    +.....  No XENIX semaphores available
-ENEEDAUTH                  .++...  Need authenticator
-ENETDOWN         POSIX     +++..+  Network is down
-ENETRESET        SUSv3     +++..+  Network dropped connection on reset
-ENETUNREACH      POSIX     +++..+  Network unreachable
-ENFILE           POSIX     ++++++  Too many open files in system
-ENOANO                     +.....  No anode
-ENOATTR                    .++...  Attribute not found
-ENOBUFS          POSIX  -  +++..+  No buffer space available
-ENOCSI                     +.....  No CSI structure available
-ENODATA          XSR       +N4...  No message available
-ENODEV           POSIX  -  ++++++  No such device
-ENOENT           POSIX  -  ++++++  No such file or directory
-ENOEXEC          POSIX     ++++++  Exec format error
-ENOFILE                    ...++.  No such file or directory
-ENOKEY                     +.....  Required key not available
-ENOLCK           POSIX     ++++++  No locks available
-ENOLINK          POSIX     ++4...  Link has been severed
-ENOMEDIUM                  +.....  No medium found
-ENOMEM           POSIX     ++++++  Not enough space
-ENOMSG           POSIX     +++..+  No message of desired type
-ENONET                     +.....  Machine is not on the network
-ENOPKG                     +.....  Package not installed
-ENOPROTOOPT      POSIX     +++..+  Protocol not available
-ENOSPC           POSIX     ++++++  No space left on device
-ENOSR            XSR       +N4...  No STREAM resources
-ENOSTR           XSR       +N4...  Not a STREAM
-ENOSYS           POSIX  +  ++++++  Function not implemented
-ENOTBLK                    +++...  Block device required
-ENOTCONN         POSIX     +++..+  Socket is not connected
-ENOTDIR          POSIX     ++++++  Not a directory
-ENOTEMPTY        POSIX     ++++++  Directory not empty
-ENOTNAM                    +.....  Not a XENIX named type file
-ENOTRECOVERABLE  SUSv4  -  +.....  State not recoverable
-ENOTSOCK         POSIX     +++..+  Socket operation on non-socket
-ENOTSUP          POSIX     +++...  Operation not supported
-ENOTTY           POSIX     ++++++  Inappropriate I/O control operation
-ENOTUNIQ                   +.....  Name not unique on network
-ENXIO            POSIX     ++++++  No such device or address
-EOPNOTSUPP       POSIX     +++..+  Operation not supported (on socket)
-EOVERFLOW        POSIX     +++..+  Value too large to be stored in data type
-EOWNERDEAD       SUSv4     +.....  Owner died
-EPERM            POSIX  -  ++++++  Operation not permitted
-EPFNOSUPPORT               +++..+  Protocol family not supported
-EPIPE            POSIX  -  ++++++  Broken pipe
-EPROCLIM                   .++...  Too many processes
-EPROCUNAVAIL               .++...  Bad procedure for program
-EPROGMISMATCH              .++...  Program version wrong
-EPROGUNAVAIL               .++...  RPC prog. not avail
-EPROTO           POSIX     ++4...  Protocol error
-EPROTONOSUPPORT  POSIX  -  +++ss+  Protocol not supported
-EPROTOTYPE       POSIX     +++..+  Protocol wrong type for socket
-EPWROFF                    ..+...  Device power is off
-ERANGE           C89    -  ++++++  Result too large
-EREMCHG                    +.....  Remote address changed
-EREMOTE                    +++...  Object is remote
-EREMOTEIO                  +.....  Remote I/O error
-ERESTART                   +.....  Interrupted system call should be restarted
-ERFKILL                    +.....  Operation not possible due to RF-kill
-EROFS            POSIX     ++++++  Read-only file system
-ERPCMISMATCH               .++...  RPC version wrong
-ESHLIBVERS                 ..+...  Shared library version mismatch
-ESHUTDOWN                  +++..+  Cannot send after socket shutdown
-ESOCKTNOSUPPORT            +++...  Socket type not supported
-ESPIPE           POSIX     ++++++  Illegal seek
-ESRCH            POSIX     ++++++  No such process
-ESRMNT                     +.....  Srmount error
-ESTALE           POSIX     +++..+  Stale NFS file handle
-ESTRPIPE                   +.....  Streams pipe error
-ETIME            XSR       +N4...  Stream ioctl timeout
-ETIMEDOUT        POSIX  -  +++ss+  Connection timed out
-ETOOMANYREFS               +++...  Too many references: cannot splice
-ETXTBSY          POSIX     +++...  Text file busy
-EUCLEAN                    +.....  Structure needs cleaning
-EUNATCH                    +.....  Protocol driver not attached
-EUSERS                     +++...  Too many users
-EWOULDBLOCK      POSIX     +++..+  Operation would block
-EXDEV            POSIX     ++++++  Cross-device link
-EXFULL                     +.....  Exchange full
-
-Notations:
-
-F: used in FFmpeg (-: a few times, +: a lot)
-
-SUSv3: Single Unix Specification, version 3
-SUSv4: Single Unix Specification, version 4
-XSR: XSI STREAMS (obsolete)
-
-OS: availability on some supported operating systems
-L: GNU/Linux
-B: BSD (F: FreeBSD, N: NetBSD)
-M: MacOS X
-W: Microsoft Windows (s: emulated with winsock, see libavformat/network.h)
-w: Mingw32 (3.17) and Mingw64 (2.0.1)
-b: BeOS

doc/eval.texi

@@ -1,192 +0,0 @@
-@chapter Expression Evaluation
-@c man begin EXPRESSION EVALUATION
-
-When evaluating an arithmetic expression, FFmpeg uses an internal
-formula evaluator, implemented through the @file{libavutil/eval.h}
-interface.
-
-An expression may contain unary, binary operators, constants, and
-functions.
-
-Two expressions @var{expr1} and @var{expr2} can be combined to form
-another expression "@var{expr1};@var{expr2}".
-@var{expr1} and @var{expr2} are evaluated in turn, and the new
-expression evaluates to the value of @var{expr2}.
-
-The following binary operators are available: @code{+}, @code{-},
-@code{*}, @code{/}, @code{^}.
-
-The following unary operators are available: @code{+}, @code{-}.
-
-The following functions are available:
-@table @option
-@item sinh(x)
-@item cosh(x)
-@item tanh(x)
-@item sin(x)
-@item cos(x)
-@item tan(x)
-@item atan(x)
-@item asin(x)
-@item acos(x)
-@item exp(x)
-@item log(x)
-@item abs(x)
-@item squish(x)
-@item gauss(x)
-@item isnan(x)
-Return 1.0 if @var{x} is NAN, 0.0 otherwise.
-
-@item mod(x, y)
-@item max(x, y)
-@item min(x, y)
-@item eq(x, y)
-@item gte(x, y)
-@item gt(x, y)
-@item lte(x, y)
-@item lt(x, y)
-@item st(var, expr)
-Allow to store the value of the expression @var{expr} in an internal
-variable. @var{var} specifies the number of the variable where to
-store the value, and it is a value ranging from 0 to 9. The function
-returns the value stored in the internal variable.
-Note, Variables are currently not shared between expressions.
-
-@item ld(var)
-Allow to load the value of the internal variable with number
-@var{var}, which was previously stored with st(@var{var}, @var{expr}).
-The function returns the loaded value.
-
-@item while(cond, expr)
-Evaluate expression @var{expr} while the expression @var{cond} is
-non-zero, and returns the value of the last @var{expr} evaluation, or
-NAN if @var{cond} was always false.
-
-@item ceil(expr)
-Round the value of expression @var{expr} upwards to the nearest
-integer. For example, "ceil(1.5)" is "2.0".
-
-@item floor(expr)
-Round the value of expression @var{expr} downwards to the nearest
-integer. For example, "floor(-1.5)" is "-2.0".
-
-@item trunc(expr)
-Round the value of expression @var{expr} towards zero to the nearest
-integer. For example, "trunc(-1.5)" is "-1.0".
-
-@item sqrt(expr)
-Compute the square root of @var{expr}. This is equivalent to
-"(@var{expr})^.5".
-
-@item not(expr)
-Return 1.0 if @var{expr} is zero, 0.0 otherwise.
-
-@item pow(x, y)
-Compute the power of @var{x} elevated @var{y}, it is equivalent to
-"(@var{x})^(@var{y})".
-
-@item random(x)
-Return a pseudo random value between 0.0 and 1.0. @var{x} is the index of the
-internal variable which will be used to save the seed/state.
-
-@item hypot(x, y)
-This function is similar to the C function with the same name; it returns
-"sqrt(@var{x}*@var{x} + @var{y}*@var{y})", the length of the hypotenuse of a
-right triangle with sides of length @var{x} and @var{y}, or the distance of the
-point (@var{x}, @var{y}) from the origin.
-
-@item gcd(x, y)
-Return the greatest common divisor of @var{x} and @var{y}. If both @var{x} and
-@var{y} are 0 or either or both are less than zero then behavior is undefined.
-
-@item if(x, y)
-Evaluate @var{x}, and if the result is non-zero return the result of
-the evaluation of @var{y}, return 0 otherwise.
-
-@item ifnot(x, y)
-Evaluate @var{x}, and if the result is zero return the result of the
-evaluation of @var{y}, return 0 otherwise.
-@end table
-
-The following constants are available:
-@table @option
-@item PI
-area of the unit disc, approximately 3.14
-@item E
-exp(1) (Euler's number), approximately 2.718
-@item PHI
-golden ratio (1+sqrt(5))/2, approximately 1.618
-@end table
-
-Assuming that an expression is considered "true" if it has a non-zero
-value, note that:
-
-@code{*} works like AND
-
-@code{+} works like OR
-
-and the construct:
-@example
-if A then B else C
-@end example
-is equivalent to
-@example
-if(A,B) + ifnot(A,C)
-@end example
-
-In your C code, you can extend the list of unary and binary functions,
-and define recognized constants, so that they are available for your
-expressions.
-
-The evaluator also recognizes the International System number
-postfixes. If 'i' is appended after the postfix, powers of 2 are used
-instead of powers of 10. The 'B' postfix multiplies the value for 8,
-and can be appended after another postfix or used alone. This allows
-using for example 'KB', 'MiB', 'G' and 'B' as postfix.
-
-Follows the list of available International System postfixes, with
-indication of the corresponding powers of 10 and of 2.
-@table @option
-@item y
--24 / -80
-@item z
--21 / -70
-@item a
--18 / -60
-@item f
--15 / -50
-@item p
--12 / -40
-@item n
--9 / -30
-@item u
--6 / -20
-@item m
--3 / -10
-@item c
--2
-@item d
--1
-@item h
-2
-@item k
-3 / 10
-@item K
-3 / 10
-@item M
-6 / 20
-@item G
-9 / 30
-@item T
-12 / 40
-@item P
-15 / 40
-@item E
-18 / 50
-@item Z
-21 / 60
-@item Y
-24 / 70
-@end table
-
-@c man end

doc/examples/Makefile

@@ -1,21 +0,0 @@
-# use pkg-config for getting CFLAGS abd LDFLAGS
-FFMPEG_LIBS=libavdevice libavformat libavfilter libavcodec libswscale libavutil
-CFLAGS+=$(shell pkg-config  --cflags $(FFMPEG_LIBS))
-LDFLAGS+=$(shell pkg-config --libs $(FFMPEG_LIBS))
-
-EXAMPLES=decoding_encoding filtering metadata muxing
-
-OBJS=$(addsuffix .o,$(EXAMPLES))
-
-%: %.o
-	$(CC) $< $(LDFLAGS) -o $@
-
-%.o: %.c
-	$(CC) $< $(CFLAGS) -c -o $@
-
-.phony: all clean
-
-all: $(OBJS) $(EXAMPLES)
-
-clean:
-	rm -rf $(EXAMPLES) $(OBJS)

doc/examples/filtering.c

@@ -1,229 +0,0 @@
-/*
- * Copyright (c) 2010 Nicolas George
- * Copyright (c) 2011 Stefano Sabatini
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/**
- * @file
- * API example for decoding and filtering
- */
-
-#define _XOPEN_SOURCE 600 /* for usleep */
-
-#include <libavcodec/avcodec.h>
-#include <libavformat/avformat.h>
-#include <libavfilter/avfiltergraph.h>
-#include <libavfilter/vsrc_buffer.h>
-
-const char *filter_descr = "scale=78:24";
-
-static AVFormatContext *fmt_ctx;
-static AVCodecContext *dec_ctx;
-AVFilterContext *buffersink_ctx;
-AVFilterContext *buffersrc_ctx;
-AVFilterGraph *filter_graph;
-static int video_stream_index = -1;
-static int64_t last_pts = AV_NOPTS_VALUE;
-
-static int open_input_file(const char *filename)
-{
-    int ret, i;
-    AVCodec *dec;
-
-    if ((ret = avformat_open_input(&fmt_ctx, filename, NULL, NULL)) < 0) {
-        av_log(NULL, AV_LOG_ERROR, "Cannot open input file\n");
-        return ret;
-    }
-
-    if ((ret = av_find_stream_info(fmt_ctx)) < 0) {
-        av_log(NULL, AV_LOG_ERROR, "Cannot find stream information\n");
-        return ret;
-    }
-
-    /* select the video stream */
-    ret = av_find_best_stream(fmt_ctx, AVMEDIA_TYPE_VIDEO, -1, -1, &dec, 0);
-    if (ret < 0) {
-        av_log(NULL, AV_LOG_ERROR, "Cannot find a video stream in the input file\n");
-        return ret;
-    }
-    video_stream_index = ret;
-    dec_ctx = fmt_ctx->streams[video_stream_index]->codec;
-
-    /* init the video decoder */
-    if ((ret = avcodec_open(dec_ctx, dec)) < 0) {
-        av_log(NULL, AV_LOG_ERROR, "Cannot open video decoder\n");
-        return ret;
-    }
-
-    return 0;
-}
-
-static int init_filters(const char *filters_descr)
-{
-    char args[512];
-    int ret;
-    AVFilter *buffersrc  = avfilter_get_by_name("buffer");
-    AVFilter *buffersink = avfilter_get_by_name("buffersink");
-    AVFilterInOut *outputs = avfilter_inout_alloc();
-    AVFilterInOut *inputs  = avfilter_inout_alloc();
-    enum PixelFormat pix_fmts[] = { PIX_FMT_GRAY8, PIX_FMT_NONE };
-    filter_graph = avfilter_graph_alloc();
-
-    /* buffer video source: the decoded frames from the decoder will be inserted here. */
-    snprintf(args, sizeof(args), "%d:%d:%d:%d:%d:%d:%d",
-             dec_ctx->width, dec_ctx->height, dec_ctx->pix_fmt,
-             dec_ctx->time_base.num, dec_ctx->time_base.den,
-             dec_ctx->sample_aspect_ratio.num, dec_ctx->sample_aspect_ratio.den);
-    ret = avfilter_graph_create_filter(&buffersrc_ctx, buffersrc, "in",
-                                       args, NULL, filter_graph);
-    if (ret < 0) {
-        av_log(NULL, AV_LOG_ERROR, "Cannot create buffer source\n");
-        return ret;
-    }
-
-    /* buffer video sink: to terminate the filter chain. */
-    ret = avfilter_graph_create_filter(&buffersink_ctx, buffersink, "out",
-                                       NULL, pix_fmts, filter_graph);
-    if (ret < 0) {
-        av_log(NULL, AV_LOG_ERROR, "Cannot create buffer sink\n");
-        return ret;
-    }
-
-    /* Endpoints for the filter graph. */
-    outputs->name       = av_strdup("in");
-    outputs->filter_ctx = buffersrc_ctx;
-    outputs->pad_idx    = 0;
-    outputs->next       = NULL;
-
-    inputs->name       = av_strdup("out");
-    inputs->filter_ctx = buffersink_ctx;
-    inputs->pad_idx    = 0;
-    inputs->next       = NULL;
-
-    if ((ret = avfilter_graph_parse(filter_graph, filter_descr,
-                                    &inputs, &outputs, NULL)) < 0)
-        return ret;
-
-    if ((ret = avfilter_graph_config(filter_graph, NULL)) < 0)
-        return ret;
-}
-
-static void display_picref(AVFilterBufferRef *picref, AVRational time_base)
-{
-    int x, y;
-    uint8_t *p0, *p;
-    int64_t delay;
-
-    if (picref->pts != AV_NOPTS_VALUE) {
-        if (last_pts != AV_NOPTS_VALUE) {
-            /* sleep roughly the right amount of time;
-             * usleep is in microseconds, just like AV_TIME_BASE. */
-            delay = av_rescale_q(picref->pts - last_pts,
-                                 time_base, AV_TIME_BASE_Q);
-            if (delay > 0 && delay < 1000000)
-                usleep(delay);
-        }
-        last_pts = picref->pts;
-    }
-
-    /* Trivial ASCII grayscale display. */
-    p0 = picref->data[0];
-    puts("\033c");
-    for (y = 0; y < picref->video->h; y++) {
-        p = p0;
-        for (x = 0; x < picref->video->w; x++)
-            putchar(" .-+#"[*(p++) / 52]);
-        putchar('\n');
-        p0 += picref->linesize[0];
-    }
-    fflush(stdout);
-}
-
-int main(int argc, char **argv)
-{
-    int ret;
-    AVPacket packet;
-    AVFrame frame;
-    int got_frame;
-
-    if (argc != 2) {
-        fprintf(stderr, "Usage: %s file\n", argv[0]);
-        exit(1);
-    }
-
-    avcodec_register_all();
-    av_register_all();
-    avfilter_register_all();
-
-    if ((ret = open_input_file(argv[1])) < 0)
-        goto end;
-    if ((ret = init_filters(filter_descr)) < 0)
-        goto end;
-
-    /* read all packets */
-    while (1) {
-        AVFilterBufferRef *picref;
-        if ((ret = av_read_frame(fmt_ctx, &packet)) < 0)
-            break;
-
-        if (packet.stream_index == video_stream_index) {
-            avcodec_get_frame_defaults(&frame);
-            got_frame = 0;
-            ret = avcodec_decode_video2(dec_ctx, &frame, &got_frame, &packet);
-            av_free_packet(&packet);
-            if (ret < 0) {
-                av_log(NULL, AV_LOG_ERROR, "Error decoding video\n");
-                break;
-            }
-
-            if (got_frame) {
-                if (frame.pts == AV_NOPTS_VALUE)
-                    frame.pts = frame.pkt_dts == AV_NOPTS_VALUE ?
-                        frame.pkt_dts : frame.pkt_pts;
-                /* push the decoded frame into the filtergraph */
-                av_vsrc_buffer_add_frame(buffersrc_ctx, &frame);
-
-                /* pull filtered pictures from the filtergraph */
-                while (avfilter_poll_frame(buffersink_ctx->inputs[0])) {
-                    av_vsink_buffer_get_video_buffer_ref(buffersink_ctx, &picref, 0);
-                    if (picref) {
-                        display_picref(picref, buffersink_ctx->inputs[0]->time_base);
-                        avfilter_unref_buffer(picref);
-                    }
-                }
-            }
-        }
-    }
-end:
-    avfilter_graph_free(&filter_graph);
-    if (dec_ctx)
-        avcodec_close(dec_ctx);
-    av_close_input_file(fmt_ctx);
-
-    if (ret < 0 && ret != AVERROR_EOF) {
-        char buf[1024];
-        av_strerror(ret, buf, sizeof(buf));
-        fprintf(stderr, "Error occurred: %s\n", buf);
-        exit(1);
-    }
-
-    exit(0);
-}

doc/examples/metadata.c

@@ -1,55 +0,0 @@
-/*
- * Copyright (c) 2011 Reinhard Tartler
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/**
- * @file
- * Shows how the metadata API can be used in application programs.
- */
-
-#include <stdio.h>
-
-#include <libavformat/avformat.h>
-#include <libavutil/dict.h>
-
-int main (int argc, char **argv)
-{
-    AVFormatContext *fmt_ctx = NULL;
-    AVDictionaryEntry *tag = NULL;
-    int ret;
-
-    if (argc != 2) {
-        printf("usage: %s <input_file>\n"
-               "example program to demonstrate the use of the libavformat metadata API.\n"
-               "\n", argv[0]);
-        return 1;
-    }
-
-    av_register_all();
-    if ((ret = avformat_open_input(&fmt_ctx, argv[1], NULL, NULL)))
-        return ret;
-
-    while ((tag = av_dict_get(fmt_ctx->metadata, "", tag, AV_DICT_IGNORE_SUFFIX)))
-        printf("%s=%s\n", tag->key, tag->value);
-
-    avformat_free_context(fmt_ctx);
-    return 0;
-}

doc/faq.texi

@@ -2,15 +2,29 @@
 
 @settitle FFmpeg FAQ
 @titlepage
+@sp 7
 @center @titlefont{FFmpeg FAQ}
+@sp 3
 @end titlepage
 
-@top
-
-@contents
 
 @chapter General Questions
 
+@section When will the next FFmpeg version be released? / Why are FFmpeg releases so few and far between?
+
+Like most open source projects FFmpeg suffers from a certain lack of
+manpower. For this reason the developers have to prioritize the work
+they do and putting out releases is not at the top of the list, fixing
+bugs and reviewing patches takes precedence. Please don't complain or
+request more timely and/or frequent releases unless you are willing to
+help out creating them.
+
+@section I have a problem with an old version of FFmpeg; where should I report it?
+Nowhere. Upgrade to the latest release or if there is no recent release upgrade
+to Subversion HEAD. You could also try to report it. Maybe you will get lucky and
+become the first person in history to get an answer different from "upgrade
+to Subversion HEAD".
+
 @section Why doesn't FFmpeg support feature [xyz]?
 
 Because no one has taken on that task yet. FFmpeg development is
@@ -24,6 +38,30 @@ No. Windows DLLs are not portable, bloated and often slow.
 Moreover FFmpeg strives to support all codecs natively.
 A DLL loader is not conducive to that goal.
 
+@section My bug report/mail to ffmpeg-devel/user has not received any replies.
+
+Likely reasons
+@itemize
+@item We are busy and haven't had time yet to read your report or
+investigate the issue.
+@item You didn't follow bugreports.html.
+@item You didn't use Subversion HEAD.
+@item You reported a segmentation fault without gdb output.
+@item You describe a problem but not how to reproduce it.
+@item It's unclear if you use ffmpeg as command line tool or use
+libav* from another application.
+@item You speak about a video having problems on playback but
+not what you use to play it.
+@item We have no faint clue what you are talking about besides
+that it is related to FFmpeg.
+@end itemize
+
+@section Is there a forum for FFmpeg? I do not like mailing lists.
+
+You may view our mailing lists with a more forum-alike look here:
+@url{http://dir.gmane.org/gmane.comp.video.ffmpeg.user},
+but, if you post, please remember that our mailing list rules still apply there.
+
 @section I cannot read this file although this format seems to be supported by ffmpeg.
 
 Even if ffmpeg can read the container format, it may not support all its
@@ -47,7 +85,7 @@ The following list of video codecs should work on most Windows systems:
 .asf only
 @item mpeg4
 Only if you have some MPEG-4 codec like ffdshow or Xvid installed.
-@item mpeg1video
+@item mpeg1
 .mpg only
 @end table
 Note, ASF files often have .wmv or .wma extensions in Windows. It should also
@@ -59,9 +97,9 @@ The following list of audio codecs should work on most Windows systems:
 @table @option
 @item adpcm_ima_wav
 @item adpcm_ms
-@item pcm_s16le
+@item pcm
 always
-@item libmp3lame
+@item mp3
 If some MP3 codec like LAME is installed.
 @end table
 
@@ -83,8 +121,7 @@ problem and an NP-hard problem...
 
 @section ffmpeg does not work; what is wrong?
 
-Try a @code{make distclean} in the ffmpeg source directory before the build.
-If this does not help see
+Try a @code{make distclean} in the ffmpeg source directory before the build. If this does not help see
 (@url{http://ffmpeg.org/bugreports.html}).
 
 @section How do I encode single pictures into movies?
@@ -101,25 +138,6 @@ Notice that @samp{%d} is replaced by the image number.
 
 @file{img%03d.jpg} means the sequence @file{img001.jpg}, @file{img002.jpg}, etc...
 
-If you have large number of pictures to rename, you can use the
-following command to ease the burden. The command, using the bourne
-shell syntax, symbolically links all files in the current directory
-that match @code{*jpg} to the @file{/tmp} directory in the sequence of
-@file{img001.jpg}, @file{img002.jpg} and so on.
-
-@example
-  x=1; for i in *jpg; do counter=$(printf %03d $x); ln -s "$i" /tmp/img"$counter".jpg; x=$(($x+1)); done
-@end example
-
-If you want to sequence them by oldest modified first, substitute
-@code{$(ls -r -t *jpg)} in place of @code{*jpg}.
-
-Then run:
-
-@example
-  ffmpeg -f image2 -i /tmp/img%03d.jpg /tmp/a.mpg
-@end example
-
 The same logic is used for any image format that ffmpeg reads.
 
 @section How do I encode movie to single pictures?
@@ -135,15 +153,15 @@ The @file{movie.mpg} used as input will be converted to
 
 Instead of relying on file format self-recognition, you may also use
 @table @option
-@item -c:v ppm
-@item -c:v png
-@item -c:v mjpeg
+@item -vcodec ppm
+@item -vcodec png
+@item -vcodec mjpeg
 @end table
 to force the encoding.
 
 Applying that to the previous example:
 @example
-  ffmpeg -i movie.mpg -f image2 -c:v mjpeg menu%d.jpg
+  ffmpeg -i movie.mpg -f image2 -vcodec mjpeg menu%d.jpg
 @end example
 
 Beware that there is no "jpeg" codec. Use "mjpeg" instead.
@@ -158,28 +176,87 @@ quite logical that there is a small reduction of quality. This is not a bug.
 
 Use @file{-} as file name.
 
+@section Why does FFmpeg not decode audio in VOB files?
+
+The audio is AC-3 (a.k.a. A/52). AC-3 decoding is an optional component in FFmpeg
+as the component that handles AC-3 decoding is currently released under the GPL.
+Enable AC-3 decoding with @code{./configure --enable-gpl}. Take care: By
+enabling AC-3, you automatically change the license of libavcodec from
+LGPL to GPL.
+
+@section Why does the chrominance data seem to be sampled at a different time from the luminance data on bt8x8 captures on Linux?
+
+This is a well-known bug in the bt8x8 driver. For 2.4.26 there is a patch at
+(@url{http://svn.ffmpeg.org/michael/trunk/patches/bttv-420-2.4.26.patch?view=co}). This may also
+apply cleanly to other 2.4-series kernels.
+
+@section How do I avoid the ugly aliasing artifacts in bt8x8 captures on Linux?
+
+Pass 'combfilter=1 lumafilter=1' to the bttv driver. Note though that 'combfilter=1'
+will cause somewhat too strong filtering. A fix is to apply (@url{http://svn.ffmpeg.org/michael/trunk/patches/bttv-comb-2.4.26.patch?view=co})
+or (@url{http://svn.ffmpeg.org/michael/trunk/patches/bttv-comb-2.6.6.patch?view=co})
+and pass 'combfilter=2'.
+
 @section -f jpeg doesn't work.
 
 Try '-f image2 test%d.jpg'.
 
-@section Why can I not change the frame rate?
+@section Why can I not change the framerate?
 
-Some codecs, like MPEG-1/2, only allow a small number of fixed frame rates.
-Choose a different codec with the -c:v command line option.
+Some codecs, like MPEG-1/2, only allow a small number of fixed framerates.
+Choose a different codec with the -vcodec command line option.
 
 @section How do I encode Xvid or DivX video with ffmpeg?
 
 Both Xvid and DivX (version 4+) are implementations of the ISO MPEG-4
 standard (note that there are many other coding formats that use this
-same standard). Thus, use '-c:v mpeg4' to encode in these formats. The
+same standard). Thus, use '-vcodec mpeg4' to encode in these formats. The
 default fourcc stored in an MPEG-4-coded file will be 'FMP4'. If you want
 a different fourcc, use the '-vtag' option. E.g., '-vtag xvid' will
 force the fourcc 'xvid' to be stored as the video fourcc rather than the
 default.
 
+@section How do I encode videos which play on the iPod?
+
+@table @option
+@item needed stuff
+-acodec libfaac -vcodec mpeg4 width<=320 height<=240
+@item working stuff
+4mv, title
+@item non-working stuff
+B-frames
+@item example command line
+ffmpeg -i input -acodec libfaac -ab 128kb -vcodec mpeg4 -b 1200kb -mbd 2 -flags +4mv -trellis 2 -aic 2 -cmp 2 -subcmp 2 -s 320x180 -title X output.mp4
+@end table
+
+@section How do I encode videos which play on the PSP?
+
+@table @option
+@item needed stuff
+-acodec libfaac -vcodec mpeg4 width*height<=76800 width%16=0 height%16=0 -ar 24000 -r 30000/1001 or 15000/1001 -f psp
+@item working stuff
+4mv, title
+@item non-working stuff
+B-frames
+@item example command line
+ffmpeg -i input -acodec libfaac -ab 128kb -vcodec mpeg4 -b 1200kb -ar 24000 -mbd 2 -flags +4mv -trellis 2 -aic 2 -cmp 2 -subcmp 2 -s 368x192 -r 30000/1001 -title X -f psp output.mp4
+@item needed stuff for H.264
+-acodec libfaac -vcodec libx264 width*height<=76800 width%16=0? height%16=0? -ar 48000 -coder 1 -r 30000/1001 or 15000/1001 -f psp
+@item working stuff for H.264
+title, loop filter
+@item non-working stuff for H.264
+CAVLC
+@item example command line
+ffmpeg -i input -acodec libfaac -ab 128kb -vcodec libx264 -b 1200kb -ar 48000 -mbd 2 -coder 1 -cmp 2 -subcmp 2 -s 368x192 -r 30000/1001 -title X -f psp -flags loop -trellis 2 -partitions parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 output.mp4
+@item higher resolution for newer PSP firmwares, width<=480, height<=272
+-vcodec libx264 -level 21 -coder 1 -f psp
+@item example command line
+ffmpeg -i input -acodec libfaac -ab 128kb -ac 2 -ar 48000 -vcodec libx264 -level 21 -b 640kb -coder 1 -f psp -flags +loop -trellis 2 -partitions +parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 -g 250 -s 480x272 output.mp4
+@end table
+
 @section Which are good parameters for encoding high quality MPEG-4?
 
-'-mbd rd -flags +mv4+aic -trellis 2 -cmp 2 -subcmp 2 -g 300 -pass 1/2',
+'-mbd rd -flags +4mv+aic -trellis 2 -cmp 2 -subcmp 2 -g 300 -pass 1/2',
 things to try: '-bf 2', '-flags qprd', '-flags mv0', '-flags skiprd'.
 
 @section Which are good parameters for encoding high quality MPEG-1/MPEG-2?
@@ -198,18 +275,19 @@ material, and try '-top 0/1' if the result looks really messed-up.
 If you have built FFmpeg with @code{./configure --enable-avisynth}
 (only possible on MinGW/Cygwin platforms),
 then you may use any file that DirectShow can read as input.
+(Be aware that this feature has been recently added,
+so you will need to help yourself in case of problems.)
 
 Just create an "input.avs" text file with this single line ...
 @example
   DirectShowSource("C:\path to your file\yourfile.asf")
 @end example
-... and then feed that text file to ffmpeg:
+... and then feed that text file to FFmpeg:
 @example
   ffmpeg -i input.avs
 @end example
 
-For ANY other help on Avisynth, please visit the
-@uref{http://www.avisynth.org/, Avisynth homepage}.
+For ANY other help on Avisynth, please visit @url{http://www.avisynth.org/}.
 
 @section How can I join video files?
 
@@ -222,13 +300,13 @@ equally humble @code{copy} under Windows), and finally transcoding back to your
 format of choice.
 
 @example
-ffmpeg -i input1.avi -same_quant intermediate1.mpg
-ffmpeg -i input2.avi -same_quant intermediate2.mpg
+ffmpeg -i input1.avi -sameq intermediate1.mpg
+ffmpeg -i input2.avi -sameq intermediate2.mpg
 cat intermediate1.mpg intermediate2.mpg > intermediate_all.mpg
-ffmpeg -i intermediate_all.mpg -same_quant output.avi
+ffmpeg -i intermediate_all.mpg -sameq output.avi
 @end example
 
-Notice that you should either use @code{-same_quant} or set a reasonably high
+Notice that you should either use @code{-sameq} or set a reasonably high
 bitrate for your intermediate and output files, if you want to preserve
 video quality.
 
@@ -238,18 +316,14 @@ of named pipes, should your platform support it:
 @example
 mkfifo intermediate1.mpg
 mkfifo intermediate2.mpg
-ffmpeg -i input1.avi -same_quant -y intermediate1.mpg < /dev/null &
-ffmpeg -i input2.avi -same_quant -y intermediate2.mpg < /dev/null &
+ffmpeg -i input1.avi -sameq -y intermediate1.mpg < /dev/null &
+ffmpeg -i input2.avi -sameq -y intermediate2.mpg < /dev/null &
 cat intermediate1.mpg intermediate2.mpg |\
-ffmpeg -f mpeg -i - -same_quant -c:v mpeg4 -acodec libmp3lame output.avi
+ffmpeg -f mpeg -i - -sameq -vcodec mpeg4 -acodec libmp3lame output.avi
 @end example
 
 Similarly, the yuv4mpegpipe format, and the raw video, raw audio codecs also
 allow concatenation, and the transcoding step is almost lossless.
-When using multiple yuv4mpegpipe(s), the first line needs to be discarded
-from all but the first stream. This can be accomplished by piping through
-@code{tail} as seen below. Note that when piping through @code{tail} you
-must use command grouping, @code{@{  ;@}}, to background properly.
 
 For example, let's say we want to join two FLV files into an output.flv file:
 
@@ -263,52 +337,32 @@ mkfifo all.v
 ffmpeg -i input1.flv -vn -f u16le -acodec pcm_s16le -ac 2 -ar 44100 - > temp1.a < /dev/null &
 ffmpeg -i input2.flv -vn -f u16le -acodec pcm_s16le -ac 2 -ar 44100 - > temp2.a < /dev/null &
 ffmpeg -i input1.flv -an -f yuv4mpegpipe - > temp1.v < /dev/null &
-@{ ffmpeg -i input2.flv -an -f yuv4mpegpipe - < /dev/null | tail -n +2 > temp2.v ; @} &
+ffmpeg -i input2.flv -an -f yuv4mpegpipe - > temp2.v < /dev/null &
 cat temp1.a temp2.a > all.a &
 cat temp1.v temp2.v > all.v &
 ffmpeg -f u16le -acodec pcm_s16le -ac 2 -ar 44100 -i all.a \
        -f yuv4mpegpipe -i all.v \
-       -same_quant -y output.flv
+       -sameq -y output.flv
 rm temp[12].[av] all.[av]
 @end example
 
-@section -profile option fails when encoding H.264 video with AAC audio
+@section FFmpeg does not adhere to the -maxrate setting, some frames are bigger than maxrate/fps.
 
-@command{ffmpeg} prints an error like
+Read the MPEG spec about video buffer verifier.
 
-@example
-Undefined constant or missing '(' in 'baseline'
-Unable to parse option value "baseline"
-Error setting option profile to value baseline.
-@end example
+@section I want CBR, but no matter what I do frame sizes differ.
 
-Short answer: write @option{-profile:v} instead of @option{-profile}.
+You do not understand what CBR is, please read the MPEG spec.
+Read about video buffer verifier and constant bitrate.
+The one sentence summary is that there is a buffer and the input rate is
+constant, the output can vary as needed.
 
-Long answer: this happens because the @option{-profile} option can apply to both
-video and audio.  Specifically the AAC encoder also defines some profiles, none
-of which are named @var{baseline}.
+@section How do I check if a stream is CBR?
 
-The solution is to apply the @option{-profile} option to the video stream only
-by using @url{http://ffmpeg.org/ffmpeg.html#Stream-specifiers-1, Stream specifiers}.
-Appending @code{:v} to it will do exactly that.
+To quote the MPEG-2 spec:
+"There is no way to tell that a bitstream is constant bitrate without
+examining all of the vbv_delay values and making complicated computations."
 
-@section Using @option{-f lavfi}, audio becomes mono for no apparent reason.
-
-Use @option{-dumpgraph -} to find out exactly where the channel layout is
-lost.
-
-Most likely, it is through @code{auto-inserted aconvert}. Try to understand
-why the converting filter was needed at that place.
-
-Just before the output is a likely place, as @option{-f lavfi} currently
-only support packed S16.
-
-Then insert the correct @code{aconvert} explicitly in the filter graph,
-specifying the exact format.
-
-@example
-aconvert=s16:stereo:packed
-@end example
 
 @chapter Development
 
@@ -356,26 +410,34 @@ the FFmpeg Windows Help Forum at
 
 No. These tools are too bloated and they complicate the build.
 
-@section Why not rewrite FFmpeg in object-oriented C++?
+@section Why not rewrite ffmpeg in object-oriented C++?
 
 FFmpeg is already organized in a highly modular manner and does not need to
 be rewritten in a formal object language. Further, many of the developers
 favor straight C; it works for them. For more arguments on this matter,
-read @uref{http://www.tux.org/lkml/#s15, "Programming Religion"}.
+read "Programming Religion" at (@url{http://www.tux.org/lkml/#s15}).
 
 @section Why are the ffmpeg programs devoid of debugging symbols?
 
 The build process creates ffmpeg_g, ffplay_g, etc. which contain full debug
 information. Those binaries are stripped to create ffmpeg, ffplay, etc. If
-you need the debug information, use the *_g versions.
+you need the debug information, used the *_g versions.
 
 @section I do not like the LGPL, can I contribute code under the GPL instead?
 
 Yes, as long as the code is optional and can easily and cleanly be placed
-under #if CONFIG_GPL without breaking anything. So, for example, a new codec
+under #if CONFIG_GPL without breaking anything. So for example a new codec
 or filter would be OK under GPL while a bug fix to LGPL code would not.
 
-@section I'm using FFmpeg from within my C++ application but the linker complains about missing symbols which seem to be available.
+@section I want to compile xyz.c alone but my compiler produced many errors.
+
+Common code is in its own files in libav* and is used by the individual
+codecs. They will not work without the common parts, you have to compile
+the whole libav*. If you wish, disable some parts with configure switches.
+You can also try to hack it and remove more, but if you had problems fixing
+the compilation failure then you are probably not qualified for this.
+
+@section I'm using libavcodec from within my C++ application but the linker complains about missing symbols which seem to be available.
 
 FFmpeg is a pure C project, so to use the libraries within your C++ application
 you need to explicitly state that you are using a C library. You can do this by
@@ -383,15 +445,23 @@ encompassing your FFmpeg includes using @code{extern "C"}.
 
 See @url{http://www.parashift.com/c++-faq-lite/mixing-c-and-cpp.html#faq-32.3}
 
-@section I'm using libavutil from within my C++ application but the compiler complains about 'UINT64_C' was not declared in this scope
-
-FFmpeg is a pure C project using C99 math features, in order to enable C++
-to use them you have to append -D__STDC_CONSTANT_MACROS to your CXXFLAGS
-
 @section I have a file in memory / a API different from *open/*read/ libc how do I use it with libavformat?
 
-You have to implement a URLProtocol, see @file{libavformat/file.c} in
-FFmpeg and @file{libmpdemux/demux_lavf.c} in MPlayer sources.
+You have to implement a URLProtocol, see libavformat/file.c in FFmpeg
+and libmpdemux/demux_lavf.c in MPlayer sources.
+
+@section I get "No compatible shell script interpreter found." in MSys.
+
+The standard MSys bash (2.04) is broken. You need to install 2.05 or later.
+
+@section I get "./configure: line <xxx>: pr: command not found" in MSys.
+
+The standard MSys install doesn't come with pr. You need to get it from the coreutils package.
+
+@section I tried to pass RTP packets into a decoder, but it doesn't work.
+
+RTP is a container format like any other, you must first depacketize the
+codec frames/samples stored in RTP and then feed to the decoder.
 
 @section Where can I find libav* headers for Pascal/Delphi?
 
@@ -399,7 +469,7 @@ see @url{http://www.iversenit.dk/dev/ffmpeg-headers/}
 
 @section Where is the documentation about ffv1, msmpeg4, asv1, 4xm?
 
-see @url{http://www.ffmpeg.org/~michael/}
+see @url{http://svn.ffmpeg.org/michael/trunk/docs/}
 
 @section How do I feed H.263-RTP (and other codecs in RTP) to libavcodec?
 
@@ -407,24 +477,12 @@ Even if peculiar since it is network oriented, RTP is a container like any
 other. You have to @emph{demux} RTP before feeding the payload to libavcodec.
 In this specific case please look at RFC 4629 to see how it should be done.
 
-@section AVStream.r_frame_rate is wrong, it is much larger than the frame rate.
+@section AVStream.r_frame_rate is wrong, it is much larger than the framerate.
 
-r_frame_rate is NOT the average frame rate, it is the smallest frame rate
+r_frame_rate is NOT the average framerate, it is the smallest framerate
 that can accurately represent all timestamps. So no, it is not
 wrong if it is larger than the average!
 For example, if you have mixed 25 and 30 fps content, then r_frame_rate
 will be 150.
 
-@section Why is @code{make fate} not running all tests?
-
-Make sure you have the fate-suite samples and the @code{SAMPLES} Make variable
-or @code{FATE_SAMPLES} environment variable or the @code{--samples}
-@command{configure} option is set to the right path.
-
-@section Why is @code{make fate} not finding the samples?
-
-Do you happen to have a @code{~} character in the samples path to indicate a
-home directory? The value is used in ways where the shell cannot expand it,
-causing FATE to not find files. Just replace @code{~} by the full path.
-
 @bye

doc/fate.texi

@@ -1,174 +0,0 @@
-\input texinfo @c -*- texinfo -*-
-
-@settitle FATE Automated Testing Environment
-@titlepage
-@center @titlefont{FATE Automated Testing Environment}
-@end titlepage
-
-@node Top
-@top
-
-@contents
-
-@chapter Introduction
-
-  FATE is an extended regression suite on the client-side and a means
-for results aggregation and presentation on the server-side.
-
-  The first part of this document explains how you can use FATE from
-your FFmpeg source directory to test your ffmpeg binary. The second
-part describes how you can run FATE to submit the results to FFmpeg's
-FATE server.
-
-  In any way you can have a look at the publicly viewable FATE results
-by visiting this website:
-
-  @url{http://fate.ffmpeg.org/}
-
-  This is especially recommended for all people contributing source
-code to FFmpeg, as it can be seen if some test on some platform broke
-with there recent contribution. This usually happens on the platforms
-the developers could not test on.
-
-  The second part of this document describes how you can run FATE to
-submit your results to FFmpeg's FATE server. If you want to submit your
-results be sure to check that your combination of CPU, OS and compiler
-is not already listed on the above mentioned website.
-
-  In the third part you can find a comprehensive listing of FATE makefile
-targets and variables.
-
-
-@chapter Using FATE from your FFmpeg source directory
-
-  If you want to run FATE on your machine you need to have the samples
-in place. You can get the samples via the build target fate-rsync.
-Use this command from the top-level source directory:
-
-@example
-make fate-rsync SAMPLES=fate-suite/
-make fate       SAMPLES=fate-suite/
-@end example
-
-  The above commands set the samples location by passing a makefile
-variable via command line. It is also possible to set the samples
-location at source configuration time by invoking configure with
-`--samples=<path to the samples directory>'. Afterwards you can
-invoke the makefile targets without setting the SAMPLES makefile
-variable. This is illustrated by the following commands:
-
-@example
-./configure --samples=fate-suite/
-make fate-rsync
-make fate
-@end example
-
-  Yet another way to tell FATE about the location of the sample
-directory is by making sure the environment variable FATE_SAMPLES
-contains the path to your samples directory. This can be achieved
-by e.g. putting that variable in your shell profile or by setting
-it in your interactive session.
-
-@example
-FATE_SAMPLES=fate-suite/ make fate
-@end example
-
-@float NOTE
-Do not put a '~' character in the samples path to indicate a home
-directory. Because of shell nuances, this will cause FATE to fail.
-@end float
-
-
-@chapter Submitting the results to the FFmpeg result aggregation server
-
-  To submit your results to the server you should run fate through the
-shell script tests/fate.sh from the FFmpeg sources. This script needs
-to be invoked with a configuration file as its first argument.
-
-@example
-tests/fate.sh /path/to/fate_config
-@end example
-
-  A configuration file template with comments describing the individual
-configuration variables can be found at @file{tests/fate_config.sh.template}.
-
-@ifhtml
-  The mentioned configuration template is also available here:
-@verbatiminclude ../tests/fate_config.sh.template
-@end ifhtml
-
-  Create a configuration that suits your needs, based on the configuration
-template. The `slot' configuration variable can be any string that is not
-yet used, but it is suggested that you name it adhering to the following
-pattern <arch>-<os>-<compiler>-<compiler version>. The configuration file
-itself will be sourced in a shell script, therefore all shell features may
-be used. This enables you to setup the environment as you need it for your
-build.
-
-  For your first test runs the `fate_recv' variable should be empty or
-commented out. This will run everything as normal except that it will omit
-the submission of the results to the server. The following files should be
-present in $workdir as specified in the configuration file:
-
-@itemize
-    @item configure.log
-    @item compile.log
-    @item test.log
-    @item report
-    @item version
-@end itemize
-
-  When you have everything working properly you can create an SSH key and
-send its public part to the FATE server administrator.
-
-  Configure your SSH client to use public key authentication with that key
-when connecting to the FATE server. Also do not forget to check the identity
-of the server and to accept its host key. This can usually be achieved by
-running your SSH client manually and killing it after you accepted the key.
-The FATE server's fingerprint is:
-
-  b1:31:c8:79:3f:04:1d:f8:f2:23:26:5a:fd:55:fa:92
-
-  The only thing left is to automate the execution of the fate.sh script and
-the synchronisation of the samples directory.
-
-
-@chapter FATE makefile targets and variables
-
-@section Makefile targets
-
-@table @option
-@item fate-rsync
-    Download/synchronize sample files to the configured samples directory.
-
-@item fate-list
-    Will list all fate/regression test targets.
-
-@item fate
-    Run the FATE test suite (requires the fate-suite dataset).
-@end table
-
-@section Makefile variables
-
-@table @option
-@item V
-    Verbosity level, can be set to 0, 1 or 2.
-    @itemize
-        @item 0: show just the test arguments
-        @item 1: show just the command used in the test
-        @item 2: show everything
-    @end itemize
-
-@item SAMPLES
-    Specify or override the path to the FATE samples at make time, it has a
-    meaning only while running the regression tests.
-
-@item THREADS
-    Specify how many threads to use while running regression tests, it is
-    quite useful to detect thread-related regressions.
-@end table
-
-Example:
-@example
-make V=1 SAMPLES=/var/fate/samples THREADS=2 fate
-@end example

doc/ffmpeg-doc.texi

@@ -0,0 +1,969 @@
+\input texinfo @c -*- texinfo -*-
+
+@settitle FFmpeg Documentation
+@titlepage
+@sp 7
+@center @titlefont{FFmpeg Documentation}
+@sp 3
+@end titlepage
+
+
+@chapter Introduction
+
+FFmpeg is a very fast video and audio converter. It can also grab from
+a live audio/video source.
+
+The command line interface is designed to be intuitive, in the sense
+that FFmpeg tries to figure out all parameters that can possibly be
+derived automatically. You usually only have to specify the target
+bitrate you want.
+
+FFmpeg can also convert from any sample rate to any other, and resize
+video on the fly with a high quality polyphase filter.
+
+@chapter Quick Start
+
+@c man begin EXAMPLES
+@section Video and Audio grabbing
+
+FFmpeg can grab video and audio from devices given that you specify the input
+format and device.
+
+@example
+ffmpeg -f oss -i /dev/dsp -f video4linux2 -i /dev/video0 /tmp/out.mpg
+@end example
+
+Note that you must activate the right video source and channel before
+launching FFmpeg with any TV viewer such as xawtv
+(@url{http://linux.bytesex.org/xawtv/}) by Gerd Knorr. You also
+have to set the audio recording levels correctly with a
+standard mixer.
+
+@section X11 grabbing
+
+FFmpeg can grab the X11 display.
+
+@example
+ffmpeg -f x11grab -s cif -i :0.0 /tmp/out.mpg
+@end example
+
+0.0 is display.screen number of your X11 server, same as
+the DISPLAY environment variable.
+
+@example
+ffmpeg -f x11grab -s cif -i :0.0+10,20 /tmp/out.mpg
+@end example
+
+0.0 is display.screen number of your X11 server, same as the DISPLAY environment
+variable. 10 is the x-offset and 20 the y-offset for the grabbing.
+
+@section Video and Audio file format conversion
+
+* FFmpeg can use any supported file format and protocol as input:
+
+Examples:
+
+* You can use YUV files as input:
+
+@example
+ffmpeg -i /tmp/test%d.Y /tmp/out.mpg
+@end example
+
+It will use the files:
+@example
+/tmp/test0.Y, /tmp/test0.U, /tmp/test0.V,
+/tmp/test1.Y, /tmp/test1.U, /tmp/test1.V, etc...
+@end example
+
+The Y files use twice the resolution of the U and V files. They are
+raw files, without header. They can be generated by all decent video
+decoders. You must specify the size of the image with the @option{-s} option
+if FFmpeg cannot guess it.
+
+* You can input from a raw YUV420P file:
+
+@example
+ffmpeg -i /tmp/test.yuv /tmp/out.avi
+@end example
+
+test.yuv is a file containing raw YUV planar data. Each frame is composed
+of the Y plane followed by the U and V planes at half vertical and
+horizontal resolution.
+
+* You can output to a raw YUV420P file:
+
+@example
+ffmpeg -i mydivx.avi hugefile.yuv
+@end example
+
+* You can set several input files and output files:
+
+@example
+ffmpeg -i /tmp/a.wav -s 640x480 -i /tmp/a.yuv /tmp/a.mpg
+@end example
+
+Converts the audio file a.wav and the raw YUV video file a.yuv
+to MPEG file a.mpg.
+
+* You can also do audio and video conversions at the same time:
+
+@example
+ffmpeg -i /tmp/a.wav -ar 22050 /tmp/a.mp2
+@end example
+
+Converts a.wav to MPEG audio at 22050 Hz sample rate.
+
+* You can encode to several formats at the same time and define a
+mapping from input stream to output streams:
+
+@example
+ffmpeg -i /tmp/a.wav -ab 64k /tmp/a.mp2 -ab 128k /tmp/b.mp2 -map 0:0 -map 0:0
+@end example
+
+Converts a.wav to a.mp2 at 64 kbits and to b.mp2 at 128 kbits. '-map
+file:index' specifies which input stream is used for each output
+stream, in the order of the definition of output streams.
+
+* You can transcode decrypted VOBs:
+
+@example
+ffmpeg -i snatch_1.vob -f avi -vcodec mpeg4 -b 800k -g 300 -bf 2 -acodec libmp3lame -ab 128k snatch.avi
+@end example
+
+This is a typical DVD ripping example; the input is a VOB file, the
+output an AVI file with MPEG-4 video and MP3 audio. Note that in this
+command we use B-frames so the MPEG-4 stream is DivX5 compatible, and
+GOP size is 300 which means one intra frame every 10 seconds for 29.97fps
+input video. Furthermore, the audio stream is MP3-encoded so you need
+to enable LAME support by passing @code{--enable-libmp3lame} to configure.
+The mapping is particularly useful for DVD transcoding
+to get the desired audio language.
+
+NOTE: To see the supported input formats, use @code{ffmpeg -formats}.
+
+* You can extract images from a video, or create a video from many images:
+
+For extracting images from a video:
+@example
+ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg
+@end example
+
+This will extract one video frame per second from the video and will
+output them in files named @file{foo-001.jpeg}, @file{foo-002.jpeg},
+etc. Images will be rescaled to fit the new WxH values.
+
+If you want to extract just a limited number of frames, you can use the
+above command in combination with the -vframes or -t option, or in
+combination with -ss to start extracting from a certain point in time.
+
+For creating a video from many images:
+@example
+ffmpeg -f image2 -i foo-%03d.jpeg -r 12 -s WxH foo.avi
+@end example
+
+The syntax @code{foo-%03d.jpeg} specifies to use a decimal number
+composed of three digits padded with zeroes to express the sequence
+number. It is the same syntax supported by the C printf function, but
+only formats accepting a normal integer are suitable.
+
+* You can put many streams of the same type in the output:
+
+@example
+ffmpeg -i test1.avi -i test2.avi -vcodec copy -acodec copy -vcodec copy -acodec copy test12.avi -newvideo -newaudio
+@end example
+
+In addition to the first video and audio streams, the resulting
+output file @file{test12.avi} will contain the second video
+and the second audio stream found in the input streams list.
+
+The @code{-newvideo}, @code{-newaudio} and @code{-newsubtitle}
+options have to be specified immediately after the name of the output
+file to which you want to add them.
+@c man end
+
+@chapter Invocation
+
+@section Syntax
+
+The generic syntax is:
+
+@example
+@c man begin SYNOPSIS
+ffmpeg [[infile options][@option{-i} @var{infile}]]... @{[outfile options] @var{outfile}@}...
+@c man end
+@end example
+@c man begin DESCRIPTION
+As a general rule, options are applied to the next specified
+file. Therefore, order is important, and you can have the same
+option on the command line multiple times. Each occurrence is
+then applied to the next input or output file.
+
+* To set the video bitrate of the output file to 64kbit/s:
+@example
+ffmpeg -i input.avi -b 64k output.avi
+@end example
+
+* To force the frame rate of the output file to 24 fps:
+@example
+ffmpeg -i input.avi -r 24 output.avi
+@end example
+
+* To force the frame rate of the input file (valid for raw formats only)
+to 1 fps and the frame rate of the output file to 24 fps:
+@example
+ffmpeg -r 1 -i input.m2v -r 24 output.avi
+@end example
+
+The format option may be needed for raw input files.
+
+By default, FFmpeg tries to convert as losslessly as possible: It
+uses the same audio and video parameters for the outputs as the one
+specified for the inputs.
+@c man end
+
+@c man begin OPTIONS
+@section Main options
+
+@table @option
+@item -L
+Show license.
+
+@item -h
+Show help.
+
+@item -version
+Show version.
+
+@item -formats
+Show available formats, codecs, bitstream filters, protocols, and frame size and frame rate abbreviations.
+
+The fields preceding the format and codec names have the following meanings:
+@table @samp
+@item D
+Decoding available
+@item E
+Encoding available
+@item V/A/S
+Video/audio/subtitle codec
+@item S
+Codec supports slices
+@item D
+Codec supports direct rendering
+@item T
+Codec can handle input truncated at random locations instead of only at frame boundaries
+@end table
+
+@item -f @var{fmt}
+Force format.
+
+@item -i @var{filename}
+input file name
+
+@item -y
+Overwrite output files.
+
+@item -t @var{duration}
+Restrict the transcoded/captured video sequence
+to the duration specified in seconds.
+@code{hh:mm:ss[.xxx]} syntax is also supported.
+
+@item -fs @var{limit_size}
+Set the file size limit.
+
+@item -ss @var{position}
+Seek to given time position in seconds.
+@code{hh:mm:ss[.xxx]} syntax is also supported.
+
+@item -itsoffset @var{offset}
+Set the input time offset in seconds.
+@code{[-]hh:mm:ss[.xxx]} syntax is also supported.
+This option affects all the input files that follow it.
+The offset is added to the timestamps of the input files.
+Specifying a positive offset means that the corresponding
+streams are delayed by 'offset' seconds.
+
+@item -timestamp @var{time}
+Set the timestamp.
+
+@item -metadata @var{key}=@var{value}
+Set a metadata key/value pair.
+
+For example, for setting the title in the output file:
+@example
+ffmpeg -i in.avi -metadata title="my title" out.flv
+@end example
+
+@item -v @var{number}
+Set the logging verbosity level.
+
+@item -target @var{type}
+Specify target file type ("vcd", "svcd", "dvd", "dv", "dv50", "pal-vcd",
+"ntsc-svcd", ... ). All the format options (bitrate, codecs,
+buffer sizes) are then set automatically. You can just type:
+
+@example
+ffmpeg -i myfile.avi -target vcd /tmp/vcd.mpg
+@end example
+
+Nevertheless you can specify additional options as long as you know
+they do not conflict with the standard, as in:
+
+@example
+ffmpeg -i myfile.avi -target vcd -bf 2 /tmp/vcd.mpg
+@end example
+
+@item -dframes @var{number}
+Set the number of data frames to record.
+
+@item -scodec @var{codec}
+Force subtitle codec ('copy' to copy stream).
+
+@item -newsubtitle
+Add a new subtitle stream to the current output stream.
+
+@item -slang @var{code}
+Set the ISO 639 language code (3 letters) of the current subtitle stream.
+
+@end table
+
+@section Video Options
+
+@table @option
+@item -b @var{bitrate}
+Set the video bitrate in bit/s (default = 200 kb/s).
+@item -vframes @var{number}
+Set the number of video frames to record.
+@item -r @var{fps}
+Set frame rate (Hz value, fraction or abbreviation), (default = 25).
+@item -s @var{size}
+Set frame size. The format is @samp{wxh} (ffserver default = 160x128, ffmpeg default = same as source).
+The following abbreviations are recognized:
+@table @samp
+@item sqcif
+128x96
+@item qcif
+176x144
+@item cif
+352x288
+@item 4cif
+704x576
+@item qqvga
+160x120
+@item qvga
+320x240
+@item vga
+640x480
+@item svga
+800x600
+@item xga
+1024x768
+@item uxga
+1600x1200
+@item qxga
+2048x1536
+@item sxga
+1280x1024
+@item qsxga
+2560x2048
+@item hsxga
+5120x4096
+@item wvga
+852x480
+@item wxga
+1366x768
+@item wsxga
+1600x1024
+@item wuxga
+1920x1200
+@item woxga
+2560x1600
+@item wqsxga
+3200x2048
+@item wquxga
+3840x2400
+@item whsxga
+6400x4096
+@item whuxga
+7680x4800
+@item cga
+320x200
+@item ega
+640x350
+@item hd480
+852x480
+@item hd720
+1280x720
+@item hd1080
+1920x1080
+@end table
+
+@item -aspect @var{aspect}
+Set aspect ratio (4:3, 16:9 or 1.3333, 1.7777).
+@item -croptop @var{size}
+Set top crop band size (in pixels).
+@item -cropbottom @var{size}
+Set bottom crop band size (in pixels).
+@item -cropleft @var{size}
+Set left crop band size (in pixels).
+@item -cropright @var{size}
+Set right crop band size (in pixels).
+@item -padtop @var{size}
+Set top pad band size (in pixels).
+@item -padbottom @var{size}
+Set bottom pad band size (in pixels).
+@item -padleft @var{size}
+Set left pad band size (in pixels).
+@item -padright @var{size}
+Set right pad band size (in pixels).
+@item -padcolor @var{hex_color}
+Set color of padded bands. The value for padcolor is expressed
+as a six digit hexadecimal number where the first two digits
+represent red, the middle two digits green and last two digits
+blue (default = 000000 (black)).
+@item -vn
+Disable video recording.
+@item -bt @var{tolerance}
+Set video bitrate tolerance (in bits, default 4000k).
+Has a minimum value of: (target_bitrate/target_framerate).
+In 1-pass mode, bitrate tolerance specifies how far ratecontrol is
+willing to deviate from the target average bitrate value. This is
+not related to min/max bitrate. Lowering tolerance too much has
+an adverse effect on quality.
+@item -maxrate @var{bitrate}
+Set max video bitrate (in bit/s).
+Requires -bufsize to be set.
+@item -minrate @var{bitrate}
+Set min video bitrate (in bit/s).
+Most useful in setting up a CBR encode:
+@example
+ffmpeg -i myfile.avi -b 4000k -minrate 4000k -maxrate 4000k -bufsize 1835k out.m2v
+@end example
+It is of little use elsewise.
+@item -bufsize @var{size}
+Set video buffer verifier buffer size (in bits).
+@item -vcodec @var{codec}
+Force video codec to @var{codec}. Use the @code{copy} special value to
+tell that the raw codec data must be copied as is.
+@item -sameq
+Use same video quality as source (implies VBR).
+
+@item -pass @var{n}
+Select the pass number (1 or 2). It is used to do two-pass
+video encoding. The statistics of the video are recorded in the first
+pass into a log file (see also the option -passlogfile),
+and in the second pass that log file is used to generate the video
+at the exact requested bitrate.
+On pass 1, you may just deactivate audio and set output to null,
+examples for Windows and Unix:
+@example
+ffmpeg -i foo.mov -vcodec libxvid -pass 1 -an -f rawvideo -y NUL
+ffmpeg -i foo.mov -vcodec libxvid -pass 1 -an -f rawvideo -y /dev/null
+@end example
+
+@item -passlogfile @var{prefix}
+Set two-pass log file name prefix to @var{prefix}, the default file name
+prefix is ``ffmpeg2pass''. The complete file name will be
+@file{PREFIX-N.log}, where N is a number specific to the output
+stream.
+
+@item -newvideo
+Add a new video stream to the current output stream.
+
+@end table
+
+@section Advanced Video Options
+
+@table @option
+@item -pix_fmt @var{format}
+Set pixel format. Use 'list' as parameter to show all the supported
+pixel formats.
+@item -sws_flags @var{flags}
+Set SwScaler flags (only available when compiled with swscale support).
+@item -g @var{gop_size}
+Set the group of pictures size.
+@item -intra
+Use only intra frames.
+@item -vdt @var{n}
+Discard threshold.
+@item -qscale @var{q}
+Use fixed video quantizer scale (VBR).
+@item -qmin @var{q}
+minimum video quantizer scale (VBR)
+@item -qmax @var{q}
+maximum video quantizer scale (VBR)
+@item -qdiff @var{q}
+maximum difference between the quantizer scales (VBR)
+@item -qblur @var{blur}
+video quantizer scale blur (VBR) (range 0.0 - 1.0)
+@item -qcomp @var{compression}
+video quantizer scale compression (VBR) (default 0.5).
+Constant of ratecontrol equation. Recommended range for default rc_eq: 0.0-1.0
+
+@item -lmin @var{lambda}
+minimum video lagrange factor (VBR)
+@item -lmax @var{lambda}
+max video lagrange factor (VBR)
+@item -mblmin @var{lambda}
+minimum macroblock quantizer scale (VBR)
+@item -mblmax @var{lambda}
+maximum macroblock quantizer scale (VBR)
+
+These four options (lmin, lmax, mblmin, mblmax) use 'lambda' units,
+but you may use the QP2LAMBDA constant to easily convert from 'q' units:
+@example
+ffmpeg -i src.ext -lmax 21*QP2LAMBDA dst.ext
+@end example
+
+@item -rc_init_cplx @var{complexity}
+initial complexity for single pass encoding
+@item -b_qfactor @var{factor}
+qp factor between P- and B-frames
+@item -i_qfactor @var{factor}
+qp factor between P- and I-frames
+@item -b_qoffset @var{offset}
+qp offset between P- and B-frames
+@item -i_qoffset @var{offset}
+qp offset between P- and I-frames
+@item -rc_eq @var{equation}
+Set rate control equation (@pxref{FFmpeg formula
+evaluator}) (default = @code{tex^qComp}).
+@item -rc_override @var{override}
+rate control override for specific intervals
+@item -me_method @var{method}
+Set motion estimation method to @var{method}.
+Available methods are (from lowest to best quality):
+@table @samp
+@item zero
+Try just the (0, 0) vector.
+@item phods
+@item log
+@item x1
+@item hex
+@item umh
+@item epzs
+(default method)
+@item full
+exhaustive search (slow and marginally better than epzs)
+@end table
+
+@item -dct_algo @var{algo}
+Set DCT algorithm to @var{algo}. Available values are:
+@table @samp
+@item 0
+FF_DCT_AUTO (default)
+@item 1
+FF_DCT_FASTINT
+@item 2
+FF_DCT_INT
+@item 3
+FF_DCT_MMX
+@item 4
+FF_DCT_MLIB
+@item 5
+FF_DCT_ALTIVEC
+@end table
+
+@item -idct_algo @var{algo}
+Set IDCT algorithm to @var{algo}. Available values are:
+@table @samp
+@item 0
+FF_IDCT_AUTO (default)
+@item 1
+FF_IDCT_INT
+@item 2
+FF_IDCT_SIMPLE
+@item 3
+FF_IDCT_SIMPLEMMX
+@item 4
+FF_IDCT_LIBMPEG2MMX
+@item 5
+FF_IDCT_PS2
+@item 6
+FF_IDCT_MLIB
+@item 7
+FF_IDCT_ARM
+@item 8
+FF_IDCT_ALTIVEC
+@item 9
+FF_IDCT_SH4
+@item 10
+FF_IDCT_SIMPLEARM
+@end table
+
+@item -er @var{n}
+Set error resilience to @var{n}.
+@table @samp
+@item 1
+FF_ER_CAREFUL (default)
+@item 2
+FF_ER_COMPLIANT
+@item 3
+FF_ER_AGGRESSIVE
+@item 4
+FF_ER_VERY_AGGRESSIVE
+@end table
+
+@item -ec @var{bit_mask}
+Set error concealment to @var{bit_mask}. @var{bit_mask} is a bit mask of
+the following values:
+@table @samp
+@item 1
+FF_EC_GUESS_MVS (default = enabled)
+@item 2
+FF_EC_DEBLOCK (default = enabled)
+@end table
+
+@item -bf @var{frames}
+Use 'frames' B-frames (supported for MPEG-1, MPEG-2 and MPEG-4).
+@item -mbd @var{mode}
+macroblock decision
+@table @samp
+@item 0
+FF_MB_DECISION_SIMPLE: Use mb_cmp (cannot change it yet in FFmpeg).
+@item 1
+FF_MB_DECISION_BITS: Choose the one which needs the fewest bits.
+@item 2
+FF_MB_DECISION_RD: rate distortion
+@end table
+
+@item -4mv
+Use four motion vector by macroblock (MPEG-4 only).
+@item -part
+Use data partitioning (MPEG-4 only).
+@item -bug @var{param}
+Work around encoder bugs that are not auto-detected.
+@item -strict @var{strictness}
+How strictly to follow the standards.
+@item -aic
+Enable Advanced intra coding (h263+).
+@item -umv
+Enable Unlimited Motion Vector (h263+)
+
+@item -deinterlace
+Deinterlace pictures.
+@item -ilme
+Force interlacing support in encoder (MPEG-2 and MPEG-4 only).
+Use this option if your input file is interlaced and you want
+to keep the interlaced format for minimum losses.
+The alternative is to deinterlace the input stream with
+@option{-deinterlace}, but deinterlacing introduces losses.
+@item -psnr
+Calculate PSNR of compressed frames.
+@item -vstats
+Dump video coding statistics to @file{vstats_HHMMSS.log}.
+@item -vstats_file @var{file}
+Dump video coding statistics to @var{file}.
+@item -vhook @var{module}
+Insert video processing @var{module}. @var{module} contains the module
+name and its parameters separated by spaces.
+@item -top @var{n}
+top=1/bottom=0/auto=-1 field first
+@item -dc @var{precision}
+Intra_dc_precision.
+@item -vtag @var{fourcc/tag}
+Force video tag/fourcc.
+@item -qphist
+Show QP histogram.
+@item -vbsf @var{bitstream_filter}
+Bitstream filters available are "dump_extra", "remove_extra", "noise", "h264_mp4toannexb", "imxdump", "mjpegadump".
+@example
+ffmpeg -i h264.mp4 -vcodec copy -vbsf h264_mp4toannexb -an out.h264
+@end example
+@end table
+
+@section Audio Options
+
+@table @option
+@item -aframes @var{number}
+Set the number of audio frames to record.
+@item -ar @var{freq}
+Set the audio sampling frequency (default = 44100 Hz).
+@item -ab @var{bitrate}
+Set the audio bitrate in bit/s (default = 64k).
+@item -aq @var{q}
+Set the audio quality (codec-specific, VBR).
+@item -ac @var{channels}
+Set the number of audio channels (default = 1).
+@item -an
+Disable audio recording.
+@item -acodec @var{codec}
+Force audio codec to @var{codec}. Use the @code{copy} special value to
+specify that the raw codec data must be copied as is.
+@item -newaudio
+Add a new audio track to the output file. If you want to specify parameters,
+do so before @code{-newaudio} (@code{-acodec}, @code{-ab}, etc..).
+
+Mapping will be done automatically, if the number of output streams is equal to
+the number of input streams, else it will pick the first one that matches. You
+can override the mapping using @code{-map} as usual.
+
+Example:
+@example
+ffmpeg -i file.mpg -vcodec copy -acodec ac3 -ab 384k test.mpg -acodec mp2 -ab 192k -newaudio
+@end example
+@item -alang @var{code}
+Set the ISO 639 language code (3 letters) of the current audio stream.
+@end table
+
+@section Advanced Audio options:
+
+@table @option
+@item -atag @var{fourcc/tag}
+Force audio tag/fourcc.
+@item -absf @var{bitstream_filter}
+Bitstream filters available are "dump_extra", "remove_extra", "noise", "mp3comp", "mp3decomp".
+@end table
+
+@section Subtitle options:
+
+@table @option
+@item -scodec @var{codec}
+Force subtitle codec ('copy' to copy stream).
+@item -newsubtitle
+Add a new subtitle stream to the current output stream.
+@item -slang @var{code}
+Set the ISO 639 language code (3 letters) of the current subtitle stream.
+@item -sn
+Disable subtitle recording.
+@item -sbsf @var{bitstream_filter}
+Bitstream filters available are "mov2textsub", "text2movsub".
+@example
+ffmpeg -i file.mov -an -vn -sbsf mov2textsub -scodec copy -f rawvideo sub.txt
+@end example
+@end table
+
+@section Audio/Video grab options
+
+@table @option
+@item -vc @var{channel}
+Set video grab channel (DV1394 only).
+@item -tvstd @var{standard}
+Set television standard (NTSC, PAL (SECAM)).
+@item -isync
+Synchronize read on input.
+@end table
+
+@section Advanced options
+
+@table @option
+@item -map @var{input_stream_id}[:@var{sync_stream_id}]
+Set stream mapping from input streams to output streams.
+Just enumerate the input streams in the order you want them in the output.
+@var{sync_stream_id} if specified sets the input stream to sync
+against.
+@item -map_meta_data @var{outfile}:@var{infile}
+Set meta data information of @var{outfile} from @var{infile}.
+@item -debug
+Print specific debug info.
+@item -benchmark
+Add timings for benchmarking.
+@item -dump
+Dump each input packet.
+@item -hex
+When dumping packets, also dump the payload.
+@item -bitexact
+Only use bit exact algorithms (for codec testing).
+@item -ps @var{size}
+Set packet size in bits.
+@item -re
+Read input at native frame rate. Mainly used to simulate a grab device.
+@item -loop_input
+Loop over the input stream. Currently it works only for image
+streams. This option is used for automatic FFserver testing.
+@item -loop_output @var{number_of_times}
+Repeatedly loop output for formats that support looping such as animated GIF
+(0 will loop the output infinitely).
+@item -threads @var{count}
+Thread count.
+@item -vsync @var{parameter}
+Video sync method. Video will be stretched/squeezed to match the timestamps,
+it is done by duplicating and dropping frames. With -map you can select from
+which stream the timestamps should be taken. You can leave either video or
+audio unchanged and sync the remaining stream(s) to the unchanged one.
+@item -async @var{samples_per_second}
+Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps,
+the parameter is the maximum samples per second by which the audio is changed.
+-async 1 is a special case where only the start of the audio stream is corrected
+without any later correction.
+@item -copyts
+Copy timestamps from input to output.
+@item -shortest
+Finish encoding when the shortest input stream ends.
+@item -dts_delta_threshold
+Timestamp discontinuity delta threshold.
+@item -muxdelay @var{seconds}
+Set the maximum demux-decode delay.
+@item -muxpreload @var{seconds}
+Set the initial demux-decode delay.
+@end table
+
+@section Preset files
+
+A preset file contains a sequence of @var{option}=@var{value} pairs,
+one for each line, specifying a sequence of options which would be
+awkward to specify on the command line. Lines starting with the hash
+('#') character are ignored and are used to provide comments. Check
+the @file{ffpresets} directory in the FFmpeg source tree for examples.
+
+Preset files are specified with the @code{vpre}, @code{apre} and
+@code{spre} options. The options specified in a preset file are
+applied to the currently selected codec of the same type as the preset
+option.
+
+The argument passed to the preset options identifies the preset file
+to use according to the following rules.
+
+First ffmpeg searches for a file named @var{arg}.ffpreset in the
+directories @file{$HOME/.ffmpeg}, and in the datadir defined at
+configuration time (usually @file{PREFIX/share/ffmpeg}) in that
+order. For example, if the argument is @code{libx264-max}, it will
+search for the file @file{libx264-max.ffpreset}.
+
+If no such file is found, then ffmpeg will search for a file named
+@var{codec_name}-@var{arg}.ffpreset in the above-mentioned
+directories, where @var{codec_name} is the name of the codec to which
+the preset file options will be applied. For example, if you select
+the video codec with @code{-vcodec libx264} and use @code{-vpre max},
+then it will search for the file @file{libx264-max.ffpreset}.
+
+Finally, if the above rules failed and the argument specifies an
+absolute pathname, ffmpeg will search for that filename. This way you
+can specify the absolute and complete filename of the preset file, for
+example @file{./ffpresets/libx264-max.ffpreset}.
+
+@node FFmpeg formula evaluator
+@section FFmpeg formula evaluator
+
+When evaluating a rate control string, FFmpeg uses an internal formula
+evaluator.
+
+The following binary operators are available: @code{+}, @code{-},
+@code{*}, @code{/}, @code{^}.
+
+The following unary operators are available: @code{+}, @code{-},
+@code{(...)}.
+
+The following statements are available: @code{ld}, @code{st},
+@code{while}.
+
+The following functions are available:
+@table @var
+@item sinh(x)
+@item cosh(x)
+@item tanh(x)
+@item sin(x)
+@item cos(x)
+@item tan(x)
+@item atan(x)
+@item asin(x)
+@item acos(x)
+@item exp(x)
+@item log(x)
+@item abs(x)
+@item squish(x)
+@item gauss(x)
+@item mod(x, y)
+@item max(x, y)
+@item min(x, y)
+@item eq(x, y)
+@item gte(x, y)
+@item gt(x, y)
+@item lte(x, y)
+@item lt(x, y)
+@item bits2qp(bits)
+@item qp2bits(qp)
+@end table
+
+The following constants are available:
+@table @var
+@item PI
+@item E
+@item iTex
+@item pTex
+@item tex
+@item mv
+@item fCode
+@item iCount
+@item mcVar
+@item var
+@item isI
+@item isP
+@item isB
+@item avgQP
+@item qComp
+@item avgIITex
+@item avgPITex
+@item avgPPTex
+@item avgBPTex
+@item avgTex
+@end table
+
+@c man end
+
+@ignore
+
+@setfilename ffmpeg
+@settitle FFmpeg video converter
+
+@c man begin SEEALSO
+ffserver(1), ffplay(1) and the HTML documentation of @file{ffmpeg}.
+@c man end
+
+@c man begin AUTHOR
+Fabrice Bellard
+@c man end
+
+@end ignore
+
+@section Protocols
+
+The file name can be @file{-} to read from standard input or to write
+to standard output.
+
+FFmpeg also handles many protocols specified with an URL syntax.
+
+Use 'ffmpeg -formats' to see a list of the supported protocols.
+
+The protocol @code{http:} is currently used only to communicate with
+FFserver (see the FFserver documentation). When FFmpeg will be a
+video player it will also be used for streaming :-)
+
+@chapter Tips
+
+@itemize
+@item For streaming at very low bitrate application, use a low frame rate
+and a small GOP size. This is especially true for RealVideo where
+the Linux player does not seem to be very fast, so it can miss
+frames. An example is:
+
+@example
+ffmpeg -g 3 -r 3 -t 10 -b 50k -s qcif -f rv10 /tmp/b.rm
+@end example
+
+@item  The parameter 'q' which is displayed while encoding is the current
+quantizer. The value 1 indicates that a very good quality could
+be achieved. The value 31 indicates the worst quality. If q=31 appears
+too often, it means that the encoder cannot compress enough to meet
+your bitrate. You must either increase the bitrate, decrease the
+frame rate or decrease the frame size.
+
+@item If your computer is not fast enough, you can speed up the
+compression at the expense of the compression ratio. You can use
+'-me zero' to speed up motion estimation, and '-intra' to disable
+motion estimation completely (you have only I-frames, which means it
+is about as good as JPEG compression).
+
+@item To have very low audio bitrates, reduce the sampling frequency
+(down to 22050 Hz for MPEG audio, 22050 or 11025 for AC-3).
+
+@item To have a constant quality (but a variable bitrate), use the option
+'-qscale n' when 'n' is between 1 (excellent quality) and 31 (worst
+quality).
+
+@item When converting video files, you can use the '-sameq' option which
+uses the same quality factor in the encoder as in the decoder.
+It allows almost lossless encoding.
+
+@end itemize
+
+@bye

doc/ffmpeg.txt

@@ -1,47 +0,0 @@
-                                                                                                                                       :
-                                             ffmpeg.c                                                                                  :       libav*
-                                             ========                                                                                  :       ======
-                                                                                                                                       :
-                                                                                                                                       :
-                                                                                                       --------------------------------:---> AVStream...
-                                                                    InputStream input_streams[]      /                                 :
-                                                                                                    /                                  :
-                    InputFile input_files[]                         +==========================+   /   ^                               :
-                                                          ------> 0 |      : st ---:-----------:--/    :                               :
-                 ^  +------+-----------+-----+          /           +--------------------------+       :                               :
-                 :  |      :ist_index--:-----:---------/          1 |      : st    :           |       :                               :
-                 :  +------+-----------+-----+                      +==========================+       :                               :
- nb_input_files  :  |      :ist_index--:-----:------------------> 2 |      : st    :           |       :                               :
-                 :  +------+-----------+-----+                      +--------------------------+       :  nb_input_streams             :
-                 :  |      :ist_index  :     |                    3 |            ...           |       :                               :
-                 v  +------+-----------+-----+                      +--------------------------+       :                               :
-                                                              --> 4 |                          |       :                               :
-                                                             |      +--------------------------+       :                               :
-                                                             |    5 |                          |       :                               :
-                                                             |      +==========================+       v                               :
-                                                             |                                                                         :
-                                                             |                                                                         :
-                                                             |                                                                         :
-                                                             |                                                                         :
-                                                              ---------                                --------------------------------:---> AVStream...
-                                                                        \                            /                                 :
-                                                                    OutputStream output_streams[]   /                                  :
-                                                                          \                        /                                   :
-                                                                    +======\======================/======+      ^                      :
-                                                          ------> 0 |   : source_index  : st-:---        |      :                      :
-                    OuputFile output_files[]            /           +------------------------------------+      :                      :
-                                                       /          1 |   :               :    :           |      :                      :
-                 ^  +------+------------+-----+       /             +------------------------------------+      :                      :
-                 :  |      : ost_index -:-----:------/            2 |   :               :    :           |      :                      :
- nb_output_files :  +------+------------+-----+                     +====================================+      :                      :
-                 :  |      : ost_index -:-----|-----------------> 3 |   :               :    :           |      :                      :
-                 :  +------+------------+-----+                     +------------------------------------+      : nb_output_streams    :
-                 :  |      :            :     |                   4 |                                    |      :                      :
-                 :  +------+------------+-----+                     +------------------------------------+      :                      :
-                 :  |      :            :     |                   5 |                                    |      :                      :
-                 v  +------+------------+-----+                     +------------------------------------+      :                      :
-                                                                  6 |                                    |      :                      :
-                                                                    +------------------------------------+      :                      :
-                                                                  7 |                                    |      :                      :
-                                                                    +====================================+      v                      :
-                                                                                                                                       :

doc/ffmpeg_powerpc_performance_evaluation_howto.txt

@@ -0,0 +1,172 @@
+FFmpeg & evaluating performance on the PowerPC Architecture HOWTO
+
+(c) 2003-2004 Romain Dolbeau <romain@dolbeau.org>
+
+
+
+I - Introduction
+
+The PowerPC architecture and its SIMD extension AltiVec offer some
+interesting tools to evaluate performance and improve the code.
+This document tries to explain how to use those tools with FFmpeg.
+
+The architecture itself offers two ways to evaluate the performance of
+a given piece of code:
+
+1) The Time Base Registers (TBL)
+2) The Performance Monitor Counter Registers (PMC)
+
+The first ones are always available, always active, but they're not very
+accurate: the registers increment by one every four *bus* cycles. On
+my 667 Mhz tiBook (ppc7450), this means once every twenty *processor*
+cycles. So we won't use that.
+
+The PMC are much more useful: not only can they report cycle-accurate
+timing, but they can also be used to monitor many other parameters,
+such as the number of AltiVec stalls for every kind of instruction,
+or instruction cache misses. The downside is that not all processors
+support the PMC (all G3, all G4 and the 970 do support them), and
+they're inactive by default - you need to activate them with a
+dedicated tool. Also, the number of available PMC depends on the
+procesor: the various 604 have 2, the various 75x (aka. G3) have 4,
+and the various 74xx (aka G4) have 6.
+
+*WARNING*: The PowerPC 970 is not very well documented, and its PMC
+registers are 64 bits wide. To properly notify the code, you *must*
+tune for the 970 (using --tune=970), or the code will assume 32 bit
+registers.
+
+
+II - Enabling FFmpeg PowerPC performance support
+
+This needs to be done by hand. First, you need to configure FFmpeg as
+usual, but add the "--powerpc-perf-enable" option. For instance:
+
+#####
+./configure --prefix=/usr/local/ffmpeg-svn --cc=gcc-3.3 --tune=7450 --powerpc-perf-enable
+#####
+
+This will configure FFmpeg to install inside /usr/local/ffmpeg-svn,
+compiling with gcc-3.3 (you should try to use this one or a newer
+gcc), and tuning for the PowerPC 7450 (i.e. the newer G4; as a rule of
+thumb, those at 550Mhz and more). It will also enable the PMC.
+
+You may also edit the file "config.h" to enable the following line:
+
+#####
+// #define ALTIVEC_USE_REFERENCE_C_CODE 1
+#####
+
+If you enable this line, then the code will not make use of AltiVec,
+but will use the reference C code instead. This is useful to compare
+performance between two versions of the code.
+
+Also, the number of enabled PMC is defined in "libavcodec/ppc/dsputil_ppc.h":
+
+#####
+#define POWERPC_NUM_PMC_ENABLED 4
+#####
+
+If you have a G4 CPU, you can enable all 6 PMC. DO NOT enable more
+PMC than available on your CPU!
+
+Then, simply compile FFmpeg as usual (make && make install).
+
+
+
+III - Using FFmpeg PowerPC performance support
+
+This FFmeg can be used exactly as usual. But before exiting, FFmpeg
+will dump a per-function report that looks like this:
+
+#####
+PowerPC performance report
+ Values are from the PMC registers, and represent whatever the
+ registers are set to record.
+ Function "gmc1_altivec" (pmc1):
+        min: 231
+        max: 1339867
+        avg: 558.25 (255302)
+ Function "gmc1_altivec" (pmc2):
+        min: 93
+        max: 2164
+        avg: 267.31 (255302)
+ Function "gmc1_altivec" (pmc3):
+        min: 72
+        max: 1987
+        avg: 276.20 (255302)
+(...)
+#####
+
+In this example, PMC1 was set to record CPU cycles, PMC2 was set to
+record AltiVec Permute Stall Cycles, and PMC3 was set to record AltiVec
+Issue Stalls.
+
+The function "gmc1_altivec" was monitored 255302 times, and the
+minimum execution time was 231 processor cycles. The max and average
+aren't much use, as it's very likely the OS interrupted execution for
+reasons of its own :-(
+
+With the exact same settings and source file, but using the reference C
+code we get:
+
+#####
+PowerPC performance report
+ Values are from the PMC registers, and represent whatever the
+ registers are set to record.
+ Function "gmc1_altivec" (pmc1):
+        min: 592
+        max: 2532235
+        avg: 962.88 (255302)
+ Function "gmc1_altivec" (pmc2):
+        min: 0
+        max: 33
+        avg: 0.00 (255302)
+ Function "gmc1_altivec" (pmc3):
+        min: 0
+        max: 350
+        avg: 0.03 (255302)
+(...)
+#####
+
+592 cycles, so the fastest AltiVec execution is about 2.5x faster than
+the fastest C execution in this example. It's not perfect but it's not
+bad (well I wrote this function so I can't say otherwise :-).
+
+Once you have that kind of report, you can try to improve things by
+finding what goes wrong and fixing it; in the example above, one
+should try to diminish the number of AltiVec stalls, as this *may*
+improve performance.
+
+
+
+IV) Enabling the PMC in Mac OS X
+
+This is easy. Use "Monster" and "monster". Those tools come from
+Apple's CHUD package, and can be found hidden in the developer web
+site & FTP site. "MONster" is the graphical application, use it to
+generate a config file specifying what each register should
+monitor. Then use the command-line application "monster" to use that
+config file, and enjoy the results.
+
+Note that "MONster" can be used for many other things, but it's
+documented by Apple, it's not my subject.
+
+If you are using CHUD 4.4.2 or later, you'll notice that MONster is
+no longer available. It's been superseeded by Shark, where
+configuration of PMCs is available as a plugin.
+
+
+
+V) Enabling the PMC on Linux
+
+On linux you may use oprofile from http://oprofile.sf.net, depending on the
+version and the cpu you may need to apply a patch[1] to access a set of the
+possibile counters from the userspace application. You can always define them
+using the kernel interface /dev/oprofile/* .
+
+[1] http://dev.gentoo.org/~lu_zero/development/oprofile-g4-20060423.patch
+
+--
+Romain Dolbeau <romain@dolbeau.org>
+Luca Barbato <lu_zero@gentoo.org>

doc/ffplay-doc.texi

@@ -1,102 +1,76 @@
 \input texinfo @c -*- texinfo -*-
 
-@settitle ffplay Documentation
+@settitle FFplay Documentation
 @titlepage
-@center @titlefont{ffplay Documentation}
+@sp 7
+@center @titlefont{FFplay Documentation}
+@sp 3
 @end titlepage
 
-@top
 
-@contents
+@chapter Introduction
 
-@chapter Synopsis
-
-@example
-@c man begin SYNOPSIS
-ffplay [options] [@file{input_file}]
-@c man end
-@end example
-
-@chapter Description
 @c man begin DESCRIPTION
-
 FFplay is a very simple and portable media player using the FFmpeg
 libraries and the SDL library. It is mostly used as a testbed for the
 various FFmpeg APIs.
 @c man end
 
-@chapter Options
+@chapter Invocation
+
+@section Syntax
+@example
+@c man begin SYNOPSIS
+ffplay [options] @file{input_file}
+@c man end
+@end example
+
 @c man begin OPTIONS
-
-@include avtools-common-opts.texi
-
 @section Main options
 
 @table @option
+@item -h
+Show help.
+@item -version
+Show version.
+@item -L
+Show license.
+@item -formats
+Show available formats, codecs, protocols, ...
 @item -x @var{width}
 Force displayed width.
 @item -y @var{height}
 Force displayed height.
 @item -s @var{size}
-Set frame size (WxH or abbreviation), needed for videos which do
-not contain a header with the frame size like raw YUV.  This option
-has been deprecated in favor of private options, try -video_size.
+Set frame size (WxH or abbreviation), needed for videos which don't
+contain a header with the frame size like raw YUV.
 @item -an
 Disable audio.
 @item -vn
 Disable video.
 @item -ss @var{pos}
 Seek to a given position in seconds.
-@item -t @var{duration}
-play <duration> seconds of audio/video
 @item -bytes
 Seek by bytes.
 @item -nodisp
 Disable graphical display.
 @item -f @var{fmt}
 Force format.
-@item -window_title @var{title}
-Set window title (default is the input filename).
-@item -loop @var{number}
-Loops movie playback <number> times. 0 means forever.
-@item -showmode @var{mode}
-Set the show mode to use.
-Available values for @var{mode} are:
-@table @samp
-@item 0, video
-show video
-@item 1, waves
-show audio waves
-@item 2, rdft
-show audio frequency band using RDFT ((Inverse) Real Discrete Fourier Transform)
-@end table
-
-Default value is "video", if video is not present or cannot be played
-"rdft" is automatically selected.
-
-You can interactively cycle through the available show modes by
-pressing the key @key{w}.
-
-@item -vf @var{filter_graph}
-@var{filter_graph} is a description of the filter graph to apply to
-the input video.
-Use the option "-filters" to show all the available filters (including
-also sources and sinks).
-
-@item -i @var{input_file}
-Read @var{input_file}.
 @end table
 
 @section Advanced options
 @table @option
 @item -pix_fmt @var{format}
 Set pixel format.
-This option has been deprecated in favor of private options, try -pixel_format.
 @item -stats
 Show the stream duration, the codec parameters, the current position in
 the stream and the audio/video synchronisation drift.
+@item -debug
+Print specific debug info.
 @item -bug
 Work around bugs.
+@item -vismv
+Visualize motion vectors.
 @item -fast
 Non-spec-compliant optimizations.
 @item -genpts
@@ -128,14 +102,6 @@ Select the desired subtitle stream number, counting from 0. The number
 refers to the list of all the input subtitle streams. If it is greater
 than the number of subtitle streams minus one, then the last one is
 selected, if it is negative the subtitle rendering is disabled.
-@item -autoexit
-Exit when video is done playing.
-@item -exitonkeydown
-Exit if any key is pressed.
-@item -exitonmousedown
-Exit if any mouse button is pressed.
-@item -codec:@var{stream_type}
-Force a specific decoder implementation
 @end table
 
 @section While playing
@@ -168,9 +134,6 @@ Seek backward/forward 10 seconds.
 @item down/up
 Seek backward/forward 1 minute.
 
-@item page down/page up
-Seek backward/forward 10 minutes.
-
 @item mouse click
 Seek to percentage in file corresponding to fraction of width.
 
@@ -178,26 +141,17 @@ Seek to percentage in file corresponding to fraction of width.
 
 @c man end
 
-@include eval.texi
-@include decoders.texi
-@include demuxers.texi
-@include muxers.texi
-@include indevs.texi
-@include outdevs.texi
-@include protocols.texi
-@include filters.texi
-
 @ignore
 
 @setfilename ffplay
 @settitle FFplay media player
 
 @c man begin SEEALSO
-ffmpeg(1), ffprobe(1), ffserver(1) and the FFmpeg HTML documentation
+ffmpeg(1), ffserver(1) and the HTML documentation of @file{ffmpeg}.
 @c man end
 
-@c man begin AUTHORS
-The FFmpeg developers
+@c man begin AUTHOR
+Fabrice Bellard
 @c man end
 
 @end ignore

doc/ffprobe.texi

@@ -1,334 +0,0 @@
-\input texinfo @c -*- texinfo -*-
-
-@settitle ffprobe Documentation
-@titlepage
-@center @titlefont{ffprobe Documentation}
-@end titlepage
-
-@top
-
-@contents
-
-@chapter Synopsis
-
-The generic syntax is:
-
-@example
-@c man begin SYNOPSIS
-ffprobe [options] [@file{input_file}]
-@c man end
-@end example
-
-@chapter Description
-@c man begin DESCRIPTION
-
-ffprobe gathers information from multimedia streams and prints it in
-human- and machine-readable fashion.
-
-For example it can be used to check the format of the container used
-by a multimedia stream and the format and type of each media stream
-contained in it.
-
-If a filename is specified in input, ffprobe will try to open and
-probe the file content. If the file cannot be opened or recognized as
-a multimedia file, a positive exit code is returned.
-
-ffprobe may be employed both as a standalone application or in
-combination with a textual filter, which may perform more
-sophisticated processing, e.g. statistical processing or plotting.
-
-Options are used to list some of the formats supported by ffprobe or
-for specifying which information to display, and for setting how
-ffprobe will show it.
-
-ffprobe output is designed to be easily parsable by a textual filter,
-and consists of one or more sections of a form defined by the selected
-writer, which is specified by the @option{print_format} option.
-
-Metadata tags stored in the container or in the streams are recognized
-and printed in the corresponding "FORMAT" or "STREAM" section.
-
-@c man end
-
-@chapter Options
-@c man begin OPTIONS
-
-@include avtools-common-opts.texi
-
-@section Main options
-
-@table @option
-
-@item -f @var{format}
-Force format to use.
-
-@item -unit
-Show the unit of the displayed values.
-
-@item -prefix
-Use SI prefixes for the displayed values.
-Unless the "-byte_binary_prefix" option is used all the prefixes
-are decimal.
-
-@item -byte_binary_prefix
-Force the use of binary prefixes for byte values.
-
-@item -sexagesimal
-Use sexagesimal format HH:MM:SS.MICROSECONDS for time values.
-
-@item -pretty
-Prettify the format of the displayed values, it corresponds to the
-options "-unit -prefix -byte_binary_prefix -sexagesimal".
-
-@item -print_format @var{writer_name}[=@var{writer_options}]
-Set the output printing format.
-
-@var{writer_name} specifies the name of the writer, and
-@var{writer_options} specifies the options to be passed to the writer.
-
-For example for printing the output in JSON format, specify:
-@example
--print_format json
-@end example
-
-For more details on the available output printing formats, see the
-Writers section below.
-
-@item -show_error
-Show information about the error found when trying to probe the input.
-
-The error information is printed within a section with name "ERROR".
-
-@item -show_format
-Show information about the container format of the input multimedia
-stream.
-
-All the container format information is printed within a section with
-name "FORMAT".
-
-@item -show_packets
-Show information about each packet contained in the input multimedia
-stream.
-
-The information for each single packet is printed within a dedicated
-section with name "PACKET".
-
-@item -show_frames
-Show information about each frame contained in the input multimedia
-stream.
-
-The information for each single frame is printed within a dedicated
-section with name "FRAME".
-
-@item -show_streams
-Show information about each media stream contained in the input
-multimedia stream.
-
-Each media stream information is printed within a dedicated section
-with name "STREAM".
-
-@item -show_private_data, -private
-Show private data, that is data depending on the format of the
-particular shown element.
-This option is enabled by default, but you may need to disable it
-for specific uses, for example when creating XSD-compliant XML output.
-
-@item -show_program_version
-Show information related to program version.
-
-Version information is printed within a section with name
-"PROGRAM_VERSION".
-
-@item -show_library_versions
-Show information related to library versions.
-
-Version information for each library is printed within a section with
-name "LIBRARY_VERSION".
-
-@item -show_versions
-Show information related to program and library versions. This is the
-equivalent of setting both @option{-show_program_version} and
-@option{-show_library_versions} options.
-
-@item -i @var{input_file}
-Read @var{input_file}.
-
-@end table
-@c man end
-
-@chapter Writers
-@c man begin WRITERS
-
-A writer defines the output format adopted by @command{ffprobe}, and will be
-used for printing all the parts of the output.
-
-A writer may accept one or more arguments, which specify the options to
-adopt.
-
-A description of the currently available writers follows.
-
-@section default
-Default format.
-
-Print each section in the form:
-@example
-[SECTION]
-key1=val1
-...
-keyN=valN
-[/SECTION]
-@end example
-
-Metadata tags are printed as a line in the corresponding FORMAT or
-STREAM section, and are prefixed by the string "TAG:".
-
-@section compact
-Compact format.
-
-Each section is printed on a single line.
-If no option is specifid, the output has the form:
-@example
-section|key1=val1| ... |keyN=valN
-@end example
-
-Metadata tags are printed in the corresponding "format" or "stream"
-section. A metadata tag key, if printed, is prefixed by the string
-"tag:".
-
-This writer accepts options as a list of @var{key}=@var{value} pairs,
-separated by ":".
-
-The description of the accepted options follows.
-
-@table @option
-
-@item item_sep, s
-Specify the character to use for separating fields in the output line.
-It must be a single printable character, it is "|" by default.
-
-@item nokey, nk
-If set to 1 specify not to print the key of each field. Its default
-value is 0.
-
-@item escape, e
-Set the escape mode to use, default to "c".
-
-It can assume one of the following values:
-@table @option
-@item c
-Perform C-like escaping. Strings containing a newline ('\n') or
-carriage return ('\r'), the escaping character ('\') or the item
-separator character @var{SEP} are escaped using C-like fashioned
-escaping, so that a newline is converted to the sequence "\n", a
-carriage return to "\r", '\' to "\\" and the separator @var{SEP} is
-converted to "\@var{SEP}".
-
-@item csv
-Perform CSV-like escaping, as described in RFC4180.  Strings
-containing a newline ('\n'), a carriage return ('\r'), a double quote
-('"'), or @var{SEP} are enclosed in double-quotes.
-
-@item none
-Perform no escaping.
-@end table
-
-@end table
-
-@section csv
-CSV format.
-
-This writer is equivalent to
-@code{compact=item_sep=,:nokey=1:escape=csv}.
-
-@section json
-JSON based format.
-
-Each section is printed using JSON notation.
-
-This writer accepts options as a list of @var{key}=@var{value} pairs,
-separated by ":".
-
-The description of the accepted options follows.
-
-@table @option
-
-@item compact, c
-If set to 1 enable compact output, that is each section will be
-printed on a single line. Default value is 0.
-@end table
-
-For more information about JSON, see @url{http://www.json.org/}.
-
-@section xml
-XML based format.
-
-The XML output is described in the XML schema description file
-@file{ffprobe.xsd} installed in the FFmpeg datadir.
-
-Note that the output issued will be compliant to the
-@file{ffprobe.xsd} schema only when no special global output options
-(@option{unit}, @option{prefix}, @option{byte_binary_prefix},
-@option{sexagesimal} etc.) are specified.
-
-This writer accepts options as a list of @var{key}=@var{value} pairs,
-separated by ":".
-
-The description of the accepted options follows.
-
-@table @option
-
-@item fully_qualified, q
-If set to 1 specify if the output should be fully qualified. Default
-value is 0.
-This is required for generating an XML file which can be validated
-through an XSD file.
-
-@item xsd_compliant, x
-If set to 1 perform more checks for ensuring that the output is XSD
-compliant. Default value is 0.
-This option automatically sets @option{fully_qualified} to 1.
-@end table
-
-For more information about the XML format, see
-@url{http://www.w3.org/XML/}.
-
-@chapter Timecode
-
-@command{ffprobe} supports Timecode extraction:
-
-@itemize
-
-@item MPEG1/2 timecode is extracted from the GOP, and is available in the video
-stream details (@option{-show_streams}, see @var{timecode}).
-
-@item MOV timecode is extracted from tmcd track, so is available in the tmcd
-stream metadata (@option{-show_streams}, see @var{TAG:timecode}).
-
-@item DV and GXF timecodes are available in format metadata
-(@option{-show_format}, see @var{TAG:timecode}).
-
-@end itemize
-
-@c man end WRITERS
-
-@include decoders.texi
-@include demuxers.texi
-@include protocols.texi
-@include indevs.texi
-
-@ignore
-
-@setfilename ffprobe
-@settitle ffprobe media prober
-
-@c man begin SEEALSO
-ffmpeg(1), ffplay(1), ffserver(1) and the FFmpeg HTML documentation
-@c man end
-
-@c man begin AUTHORS
-The FFmpeg developers
-@c man end
-
-@end ignore
-
-@bye

doc/ffprobe.xsd

@@ -1,164 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
-    targetNamespace="http://www.ffmpeg.org/schema/ffprobe"
-    xmlns:ffprobe="http://www.ffmpeg.org/schema/ffprobe">
-
-    <xsd:element name="ffprobe" type="ffprobe:ffprobeType"/>
-
-    <xsd:complexType name="ffprobeType">
-        <xsd:sequence>
-            <xsd:element name="packets"  type="ffprobe:packetsType" minOccurs="0" maxOccurs="1" />
-            <xsd:element name="frames"   type="ffprobe:framesType"  minOccurs="0" maxOccurs="1" />
-            <xsd:element name="streams"  type="ffprobe:streamsType" minOccurs="0" maxOccurs="1" />
-            <xsd:element name="format"   type="ffprobe:formatType"  minOccurs="0" maxOccurs="1" />
-            <xsd:element name="error"    type="ffprobe:errorType"   minOccurs="0" maxOccurs="1" />
-            <xsd:element name="program_version"  type="ffprobe:programVersionType"  minOccurs="0" maxOccurs="1" />
-            <xsd:element name="library_versions" type="ffprobe:libraryVersionsType" minOccurs="0" maxOccurs="1" />
-        </xsd:sequence>
-    </xsd:complexType>
-
-    <xsd:complexType name="packetsType">
-        <xsd:sequence>
-            <xsd:element name="packet" type="ffprobe:packetType" minOccurs="0" maxOccurs="unbounded"/>
-        </xsd:sequence>
-    </xsd:complexType>
-
-    <xsd:complexType name="framesType">
-        <xsd:sequence>
-            <xsd:element name="frame" type="ffprobe:frameType" minOccurs="0" maxOccurs="unbounded"/>
-        </xsd:sequence>
-    </xsd:complexType>
-
-    <xsd:complexType name="packetType">
-      <xsd:attribute name="codec_type"    type="xsd:string" use="required" />
-      <xsd:attribute name="stream_index"  type="xsd:int" use="required" />
-      <xsd:attribute name="pts"           type="xsd:long"  />
-      <xsd:attribute name="pts_time"      type="xsd:float" />
-      <xsd:attribute name="dts"           type="xsd:long"  />
-      <xsd:attribute name="dts_time"      type="xsd:float" />
-      <xsd:attribute name="duration"      type="xsd:long"  />
-      <xsd:attribute name="duration_time" type="xsd:float" />
-      <xsd:attribute name="size"          type="xsd:long" use="required" />
-      <xsd:attribute name="pos"           type="xsd:long"  />
-      <xsd:attribute name="flags"         type="xsd:string" use="required" />
-    </xsd:complexType>
-
-    <xsd:complexType name="frameType">
-      <xsd:attribute name="media_type"    type="xsd:string" use="required"/>
-      <xsd:attribute name="key_frame"     type="xsd:int"    use="required"/>
-      <xsd:attribute name="pts"           type="xsd:long" />
-      <xsd:attribute name="pts_time"      type="xsd:float"/>
-      <xsd:attribute name="pkt_pts"       type="xsd:long" />
-      <xsd:attribute name="pkt_pts_time"  type="xsd:float"/>
-      <xsd:attribute name="pkt_dts"       type="xsd:long" />
-      <xsd:attribute name="pkt_dts_time"  type="xsd:float"/>
-      <xsd:attribute name="pkt_pos"       type="xsd:long" />
-
-      <!-- audio attributes -->
-      <xsd:attribute name="sample_fmt"             type="xsd:string"/>
-      <xsd:attribute name="nb_samples"             type="xsd:long"  />
-
-      <!-- video attributes -->
-      <xsd:attribute name="width"                  type="xsd:long"  />
-      <xsd:attribute name="height"                 type="xsd:long"  />
-      <xsd:attribute name="pix_fmt"                type="xsd:string"/>
-      <xsd:attribute name="sample_aspect_ratio"    type="xsd:string"/>
-      <xsd:attribute name="pict_type"              type="xsd:string"/>
-      <xsd:attribute name="coded_picture_number"   type="xsd:long"  />
-      <xsd:attribute name="display_picture_number" type="xsd:long"  />
-      <xsd:attribute name="interlaced_frame"       type="xsd:int"   />
-      <xsd:attribute name="top_field_first"        type="xsd:int"   />
-      <xsd:attribute name="repeat_pict"            type="xsd:int"   />
-      <xsd:attribute name="reference"              type="xsd:int"   />
-    </xsd:complexType>
-
-    <xsd:complexType name="streamsType">
-        <xsd:sequence>
-            <xsd:element name="stream" type="ffprobe:streamType" minOccurs="0" maxOccurs="unbounded"/>
-        </xsd:sequence>
-    </xsd:complexType>
-
-    <xsd:complexType name="streamType">
-      <xsd:attribute name="index"            type="xsd:int" use="required"/>
-      <xsd:attribute name="codec_name"       type="xsd:string" />
-      <xsd:attribute name="codec_long_name"  type="xsd:string" />
-      <xsd:attribute name="codec_type"       type="xsd:string" />
-      <xsd:attribute name="codec_time_base"  type="xsd:string" use="required"/>
-      <xsd:attribute name="codec_tag"        type="xsd:string" use="required"/>
-      <xsd:attribute name="codec_tag_string" type="xsd:string" use="required"/>
-
-      <!-- video attributes -->
-      <xsd:attribute name="width"                type="xsd:int"/>
-      <xsd:attribute name="height"               type="xsd:int"/>
-      <xsd:attribute name="has_b_frames"         type="xsd:int"/>
-      <xsd:attribute name="sample_aspect_ratio"  type="xsd:string"/>
-      <xsd:attribute name="display_aspect_ratio" type="xsd:string"/>
-      <xsd:attribute name="pix_fmt"              type="xsd:string"/>
-      <xsd:attribute name="level"                type="xsd:int"/>
-      <xsd:attribute name="timecode"             type="xsd:string"/>
-
-      <!-- audio attributes -->
-      <xsd:attribute name="sample_fmt"       type="xsd:string"/>
-      <xsd:attribute name="sample_rate"      type="xsd:int"/>
-      <xsd:attribute name="channels"         type="xsd:int"/>
-      <xsd:attribute name="bits_per_sample"  type="xsd:int"/>
-
-      <xsd:attribute name="id"               type="xsd:string"/>
-      <xsd:attribute name="r_frame_rate"     type="xsd:string" use="required"/>
-      <xsd:attribute name="avg_frame_rate"   type="xsd:string" use="required"/>
-      <xsd:attribute name="time_base"        type="xsd:string" use="required"/>
-      <xsd:attribute name="start_time"       type="xsd:float"/>
-      <xsd:attribute name="duration"         type="xsd:float"/>
-      <xsd:attribute name="nb_frames"        type="xsd:int"/>
-    </xsd:complexType>
-
-    <xsd:complexType name="formatType">
-      <xsd:sequence>
-        <xsd:element name="tag" type="ffprobe:tagType" minOccurs="0" maxOccurs="unbounded"/>
-      </xsd:sequence>
-
-      <xsd:attribute name="filename"         type="xsd:string" use="required"/>
-      <xsd:attribute name="nb_streams"       type="xsd:int"    use="required"/>
-      <xsd:attribute name="format_name"      type="xsd:string" use="required"/>
-      <xsd:attribute name="format_long_name" type="xsd:string" use="required"/>
-      <xsd:attribute name="start_time"       type="xsd:float"/>
-      <xsd:attribute name="duration"         type="xsd:float"/>
-      <xsd:attribute name="size"             type="xsd:long"/>
-      <xsd:attribute name="bit_rate"         type="xsd:long"/>
-    </xsd:complexType>
-
-    <xsd:complexType name="tagType">
-      <xsd:attribute name="key"   type="xsd:string" use="required"/>
-      <xsd:attribute name="value" type="xsd:string" use="required"/>
-    </xsd:complexType>
-
-    <xsd:complexType name="errorType">
-      <xsd:attribute name="code"   type="xsd:int"    use="required"/>
-      <xsd:attribute name="string" type="xsd:string" use="required"/>
-    </xsd:complexType>
-
-    <xsd:complexType name="programVersionType">
-      <xsd:attribute name="version"          type="xsd:string" use="required"/>
-      <xsd:attribute name="copyright"        type="xsd:string" use="required"/>
-      <xsd:attribute name="build_date"       type="xsd:string" use="required"/>
-      <xsd:attribute name="build_time"       type="xsd:string" use="required"/>
-      <xsd:attribute name="compiler_type"    type="xsd:string" use="required"/>
-      <xsd:attribute name="compiler_version" type="xsd:string" use="required"/>
-      <xsd:attribute name="configuration"    type="xsd:string" use="required"/>
-    </xsd:complexType>
-
-    <xsd:complexType name="libraryVersionType">
-      <xsd:attribute name="name"        type="xsd:string" use="required"/>
-      <xsd:attribute name="major"       type="xsd:int"    use="required"/>
-      <xsd:attribute name="minor"       type="xsd:int"    use="required"/>
-      <xsd:attribute name="micro"       type="xsd:int"    use="required"/>
-      <xsd:attribute name="version"     type="xsd:int"    use="required"/>
-    </xsd:complexType>
-
-    <xsd:complexType name="libraryVersionsType">
-        <xsd:sequence>
-          <xsd:element name="library_version" type="ffprobe:libraryVersionType" minOccurs="0" maxOccurs="unbounded"/>
-        </xsd:sequence>
-    </xsd:complexType>
-</xsd:schema>

doc/ffserver-doc.texi

@@ -1,46 +1,34 @@
 \input texinfo @c -*- texinfo -*-
 
-@settitle ffserver Documentation
+@settitle FFserver Documentation
 @titlepage
-@center @titlefont{ffserver Documentation}
+@sp 7
+@center @titlefont{FFserver Documentation}
+@sp 3
 @end titlepage
 
-@top
 
-@contents
+@chapter Introduction
 
-@chapter Synopsys
-
-The generic syntax is:
-
-@example
-@c man begin SYNOPSIS
-ffserver [options]
-@c man end
-@end example
-
-@chapter Description
 @c man begin DESCRIPTION
-
-ffserver is a streaming server for both audio and video. It supports
-
+FFserver is a streaming server for both audio and video. It supports
 several live feeds, streaming from files and time shifting on live feeds
 (you can seek to positions in the past on each live feed, provided you
 specify a big enough feed storage in ffserver.conf).
 
-ffserver runs in daemon mode by default; that is, it puts itself in
+FFserver runs in daemon mode by default; that is, it puts itself in
 the background and detaches from its TTY, unless it is launched in
 debug mode or a NoDaemon option is specified in the configuration
 file.
 
 This documentation covers only the streaming aspects of ffserver /
 ffmpeg. All questions about parameters for ffmpeg, codec questions,
-etc. are not covered here. Read @file{ffmpeg.html} for more
+etc. are not covered here. Read @file{ffmpeg-doc.html} for more
 information.
 
 @section How does it work?
 
-ffserver receives prerecorded files or FFM streams from some ffmpeg
+FFserver receives prerecorded files or FFM streams from some ffmpeg
 instance as input, then streams them over RTP/RTSP/HTTP.
 
 An ffserver instance will listen on some port as specified in the
@@ -58,7 +46,7 @@ file.
 
 @section Status stream
 
-ffserver supports an HTTP interface which exposes the current status
+FFserver supports an HTTP interface which exposes the current status
 of the server.
 
 Simply point your browser to the address of the special status stream
@@ -111,8 +99,8 @@ As a simple test, just run the following two command lines where INPUTFILE
 is some file which you can decode with ffmpeg:
 
 @example
-ffserver -f doc/ffserver.conf &
-ffmpeg -i INPUTFILE http://localhost:8090/feed1.ffm
+./ffserver -f doc/ffserver.conf &
+./ffmpeg -i INPUTFILE http://localhost:8090/feed1.ffm
 @end example
 
 At this point you should be able to go to your Windows machine and fire up
@@ -147,7 +135,7 @@ that only captures in stereo and also requires that one channel be flipped.
 If you are one of these people, then export 'AUDIO_FLIP_LEFT=1' before
 starting ffmpeg.
 
-@subsection The audio and video lose sync after a while.
+@subsection The audio and video loose sync after a while.
 
 Yes, they do.
 
@@ -238,20 +226,31 @@ You use this by adding the ?date= to the end of the URL for the stream.
 For example:   @samp{http://localhost:8080/test.asf?date=2002-07-26T23:05:00}.
 @c man end
 
-@chapter Options
+@chapter Invocation
+@section Syntax
+@example
+@c man begin SYNOPSIS
+ffserver [options]
+@c man end
+@end example
+
+@section Options
 @c man begin OPTIONS
-
-@include avtools-common-opts.texi
-
-@section Main options
-
 @table @option
+@item -version
+Show version.
+@item -L
+Show license.
+@item -formats
+Show available formats, codecs, protocols, ...
+@item -h
+Show help.
 @item -f @var{configfile}
 Use @file{configfile} instead of @file{/etc/ffserver.conf}.
 @item -n
 Enable no-launch mode. This option disables all the Launch directives
-within the various <Stream> sections. Since ffserver will not launch
-any ffmpeg instances, you will have to launch them manually.
+within the various <Stream> sections. FFserver will not launch any
+ffmpeg instance, so you will have to launch them manually.
 @item -d
 Enable debug mode. This option increases log verbosity, directs log
 messages to stdout and causes ffserver to run in the foreground
@@ -262,16 +261,15 @@ rather than as a daemon.
 @ignore
 
 @setfilename ffserver
-@settitle ffserver video server
+@settitle FFserver video server
 
 @c man begin SEEALSO
-
-ffmpeg(1), ffplay(1), ffprobe(1), the @file{ffserver.conf}
-example and the FFmpeg HTML documentation
+ffmpeg(1), ffplay(1), the @file{ffmpeg/doc/ffserver.conf} example and
+the HTML documentation of @file{ffmpeg}.
 @c man end
 
-@c man begin AUTHORS
-The FFmpeg developers
+@c man begin AUTHOR
+Fabrice Bellard
 @c man end
 
 @end ignore

doc/ffserver.conf

@@ -306,27 +306,6 @@ StartSendOnKey
 #</Stream>
 
 
-# Transcode an incoming live feed to another live feed,
-# using libx264 and video presets
-
-#<Stream live.h264>
-#Format rtp
-#Feed feed1.ffm
-#VideoCodec libx264
-#VideoFrameRate 24
-#VideoBitRate 100
-#VideoSize 480x272
-#AVPresetVideo default
-#AVPresetVideo baseline
-#AVOptionVideo flags +global_header
-#
-#AudioCodec libfaac
-#AudioBitRate 32
-#AudioChannels 2
-#AudioSampleRate 22050
-#AVOptionAudio flags +global_header
-#</Stream>
-
 ##################################################################
 # SDP/multicast examples
 #

doc/git-howto.texi

@@ -1,344 +0,0 @@
-\input texinfo @c -*- texinfo -*-
-
-@settitle Using git to develop FFmpeg
-
-@titlepage
-@center @titlefont{Using git to develop FFmpeg}
-@end titlepage
-
-@top
-
-@contents
-
-@chapter Introduction
-
-This document aims in giving some quick references on a set of useful git
-commands. You should always use the extensive and detailed documentation
-provided directly by git:
-
-@example
-git --help
-man git
-@end example
-
-shows you the available subcommands,
-
-@example
-git <command> --help
-man git-<command>
-@end example
-
-shows information about the subcommand <command>.
-
-Additional information could be found on the
-@url{http://gitref.org, Git Reference} website
-
-For more information about the Git project, visit the
-
-@url{http://git-scm.com/, Git website}
-
-Consult these resources whenever you have problems, they are quite exhaustive.
-
-What follows now is a basic introduction to Git and some FFmpeg-specific
-guidelines to ease the contribution to the project
-
-@chapter Basics Usage
-
-@section Get GIT
-
-You can get git from @url{http://git-scm.com/}
-Most distribution and operating system provide a package for it.
-
-
-@section Cloning the source tree
-
-@example
-git clone git://source.ffmpeg.org/ffmpeg <target>
-@end example
-
-This will put the FFmpeg sources into the directory @var{<target>}.
-
-@example
-git clone git@@source.ffmpeg.org:ffmpeg <target>
-@end example
-
-This will put the FFmpeg sources into the directory @var{<target>} and let
-you push back your changes to the remote repository.
-
-
-@section Updating the source tree to the latest revision
-
-@example
-git pull (--rebase)
-@end example
-
-pulls in the latest changes from the tracked branch. The tracked branch
-can be remote. By default the master branch tracks the branch master in
-the remote origin.
-
-@float IMPORTANT
-@command{--rebase} (see below) is recommended.
-@end float
-
-@section Rebasing your local branches
-
-@example
-git pull --rebase
-@end example
-
-fetches the changes from the main repository and replays your local commits
-over it. This is required to keep all your local changes at the top of
-FFmpeg's master tree. The master tree will reject pushes with merge commits.
-
-
-@section Adding/removing files/directories
-
-@example
-git add [-A] <filename/dirname>
-git rm [-r] <filename/dirname>
-@end example
-
-GIT needs to get notified of all changes you make to your working
-directory that makes files appear or disappear.
-Line moves across files are automatically tracked.
-
-
-@section Showing modifications
-
-@example
-git diff <filename(s)>
-@end example
-
-will show all local modifications in your working directory as unified diff.
-
-
-@section Inspecting the changelog
-
-@example
-git log <filename(s)>
-@end example
-
-You may also use the graphical tools like gitview or gitk or the web
-interface available at http://source.ffmpeg.org/
-
-@section Checking source tree status
-
-@example
-git status
-@end example
-
-detects all the changes you made and lists what actions will be taken in case
-of a commit (additions, modifications, deletions, etc.).
-
-
-@section Committing
-
-@example
-git diff --check
-@end example
-
-to double check your changes before committing them to avoid trouble later
-on. All experienced developers do this on each and every commit, no matter
-how small.
-Every one of them has been saved from looking like a fool by this many times.
-It's very easy for stray debug output or cosmetic modifications to slip in,
-please avoid problems through this extra level of scrutiny.
-
-For cosmetics-only commits you should get (almost) empty output from
-
-@example
-git diff -w -b <filename(s)>
-@end example
-
-Also check the output of
-
-@example
-git status
-@end example
-
-to make sure you don't have untracked files or deletions.
-
-@example
-git add [-i|-p|-A] <filenames/dirnames>
-@end example
-
-Make sure you have told git your name and email address
-
-@example
-git config --global user.name "My Name"
-git config --global user.email my@@email.invalid
-@end example
-
-Use @var{--global} to set the global configuration for all your git checkouts.
-
-Git will select the changes to the files for commit. Optionally you can use
-the interactive or the patch mode to select hunk by hunk what should be
-added to the commit.
-
-
-@example
-git commit
-@end example
-
-Git will commit the selected changes to your current local branch.
-
-You will be prompted for a log message in an editor, which is either
-set in your personal configuration file through
-
-@example
-git config --global core.editor
-@end example
-
-or set by one of the following environment variables:
-@var{GIT_EDITOR}, @var{VISUAL} or @var{EDITOR}.
-
-Log messages should be concise but descriptive. Explain why you made a change,
-what you did will be obvious from the changes themselves most of the time.
-Saying just "bug fix" or "10l" is bad. Remember that people of varying skill
-levels look at and educate themselves while reading through your code. Don't
-include filenames in log messages, Git provides that information.
-
-Possibly make the commit message have a terse, descriptive first line, an
-empty line and then a full description. The first line will be used to name
-the patch by git format-patch.
-
-@section Preparing a patchset
-
-@example
-git format-patch <commit> [-o directory]
-@end example
-
-will generate a set of patches for each commit between @var{<commit>} and
-current @var{HEAD}. E.g.
-
-@example
-git format-patch origin/master
-@end example
-
-will generate patches for all commits on current branch which are not
-present in upstream.
-A useful shortcut is also
-
-@example
-git format-patch -n
-@end example
-
-which will generate patches from last @var{n} commits.
-By default the patches are created in the current directory.
-
-@section Sending patches for review
-
-@example
-git send-email <commit list|directory>
-@end example
-
-will send the patches created by @command{git format-patch} or directly
-generates them. All the email fields can be configured in the global/local
-configuration or overridden by command line.
-Note that this tool must often be installed separately (e.g. @var{git-email}
-package on Debian-based distros).
-
-
-@section Renaming/moving/copying files or contents of files
-
-Git automatically tracks such changes, making those normal commits.
-
-@example
-mv/cp path/file otherpath/otherfile
-git add [-A] .
-git commit
-@end example
-
-
-@chapter FFmpeg specific
-
-@section Reverting broken commits
-
-@example
-git reset <commit>
-@end example
-
-@command{git reset} will uncommit the changes till @var{<commit>} rewriting
-the current branch history.
-
-@example
-git commit --amend
-@end example
-
-allows to amend the last commit details quickly.
-
-@example
-git rebase -i origin/master
-@end example
-
-will replay local commits over the main repository allowing to edit, merge
-or remove some of them in the process.
-
-@float NOTE
-@command{git reset}, @command{git commit --amend} and @command{git rebase}
-rewrite history, so you should use them ONLY on your local or topic branches.
-The main repository will reject those changes.
-@end float
-
-@example
-git revert <commit>
-@end example
-
-@command{git revert} will generate a revert commit. This will not make the
-faulty commit disappear from the history.
-
-@section Pushing changes to remote trees
-
-@example
-git push
-@end example
-
-Will push the changes to the default remote (@var{origin}).
-Git will prevent you from pushing changes if the local and remote trees are
-out of sync. Refer to and to sync the local tree.
-
-@example
-git remote add <name> <url>
-@end example
-
-Will add additional remote with a name reference, it is useful if you want
-to push your local branch for review on a remote host.
-
-@example
-git push <remote> <refspec>
-@end example
-
-Will push the changes to the @var{<remote>} repository.
-Omitting @var{<refspec>} makes @command{git push} update all the remote
-branches matching the local ones.
-
-@section Finding a specific svn revision
-
-Since version 1.7.1 git supports @var{:/foo} syntax for specifying commits
-based on a regular expression. see man gitrevisions
-
-@example
-git show :/'as revision 23456'
-@end example
-
-will show the svn changeset @var{r23456}. With older git versions searching in
-the @command{git log} output is the easiest option (especially if a pager with
-search capabilities is used).
-This commit can be checked out with
-
-@example
-git checkout -b svn_23456 :/'as revision 23456'
-@end example
-
-or for git < 1.7.1 with
-
-@example
-git checkout -b svn_23456 $SHA1
-@end example
-
-where @var{$SHA1} is the commit hash from the @command{git log} output.
-
-@chapter Server Issues
-
-Contact the project admins @email{root@@ffmpeg.org} if you have technical
-problems with the GIT server.

doc/git-howto.txt

@@ -1,273 +0,0 @@
-
-About Git write access:
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Before everything else, you should know how to use GIT properly.
-Luckily Git comes with excellent documentation.
-
-  git --help
-  man git
-
-shows you the available subcommands,
-
-  git <command> --help
-  man git-<command>
-
-shows information about the subcommand <command>.
-
-The most comprehensive manual is the website Git Reference
-
-http://gitref.org/
-
-For more information about the Git project, visit
-
-http://git-scm.com/
-
-Consult these resources whenever you have problems, they are quite exhaustive.
-
-You do not need a special username or password.
-All you need is to provide a ssh public key to the Git server admin.
-
-What follows now is a basic introduction to Git and some FFmpeg-specific
-guidelines. Read it at least once, if you are granted commit privileges to the
-FFmpeg project you are expected to be familiar with these rules.
-
-
-
-I. BASICS:
-==========
-
-0. Get GIT:
-
-  Most distributions have a git package, if not
-  You can get git from http://git-scm.com/
-
-
-1. Cloning the source tree:
-
-    git clone git://source.ffmpeg.org/ffmpeg <target>
-
-  This will put the FFmpeg sources into the directory <target>.
-
-    git clone git@source.ffmpeg.org:ffmpeg <target>
-
-  This will put the FFmpeg sources into the directory <target> and let
-  you push back your changes to the remote repository.
-
-
-2. Updating the source tree to the latest revision:
-
-    git pull (--ff-only)
-
-  pulls in the latest changes from the tracked branch. The tracked branch
-  can be remote. By default the master branch tracks the branch master in
-  the remote origin.
-  Caveat: Since merge commits are forbidden at least for the initial
-          months of git --ff-only or --rebase (see below) are recommended.
-          --ff-only will fail and not create merge commits if your branch
-          has diverged (has a different history) from the tracked branch.
-
-2.a Rebasing your local branches:
-
-    git pull --rebase
-
-  fetches the changes from the main repository and replays your local commits
-  over it. This is required to keep all your local changes at the top of
-  FFmpeg's master tree. The master tree will reject pushes with merge commits.
-
-
-3. Adding/removing files/directories:
-
-    git add [-A] <filename/dirname>
-    git rm [-r] <filename/dirname>
-
-  GIT needs to get notified of all changes you make to your working
-  directory that makes files appear or disappear.
-  Line moves across files are automatically tracked.
-
-
-4. Showing modifications:
-
-    git diff <filename(s)>
-
-  will show all local modifications in your working directory as unified diff.
-
-
-5. Inspecting the changelog:
-
-    git log <filename(s)>
-
-  You may also use the graphical tools like gitview or gitk or the web
-  interface available at http://source.ffmpeg.org
-
-6. Checking source tree status:
-
-    git status
-
-  detects all the changes you made and lists what actions will be taken in case
-  of a commit (additions, modifications, deletions, etc.).
-
-
-7. Committing:
-
-    git diff --check
-
-  to double check your changes before committing them to avoid trouble later
-  on. All experienced developers do this on each and every commit, no matter
-  how small.
-  Every one of them has been saved from looking like a fool by this many times.
-  It's very easy for stray debug output or cosmetic modifications to slip in,
-  please avoid problems through this extra level of scrutiny.
-
-  For cosmetics-only commits you should get (almost) empty output from
-
-    git diff -w -b <filename(s)>
-
-  Also check the output of
-
-    git status
-
-  to make sure you don't have untracked files or deletions.
-
-    git add [-i|-p|-A] <filenames/dirnames>
-
-  Make sure you have told git your name and email address, e.g. by running
-    git config --global user.name "My Name"
-    git config --global user.email my@email.invalid
-  (--global to set the global configuration for all your git checkouts).
-
-  Git will select the changes to the files for commit. Optionally you can use
-  the interactive or the patch mode to select hunk by hunk what should be
-  added to the commit.
-
-    git commit
-
-  Git will commit the selected changes to your current local branch.
-
-  You will be prompted for a log message in an editor, which is either
-  set in your personal configuration file through
-
-    git config core.editor
-
-  or set by one of the following environment variables:
-  GIT_EDITOR, VISUAL or EDITOR.
-
-  Log messages should be concise but descriptive. Explain why you made a change,
-  what you did will be obvious from the changes themselves most of the time.
-  Saying just "bug fix" or "10l" is bad. Remember that people of varying skill
-  levels look at and educate themselves while reading through your code. Don't
-  include filenames in log messages, Git provides that information.
-
-  Possibly make the commit message have a terse, descriptive first line, an
-  empty line and then a full description. The first line will be used to name
-  the patch by git format-patch.
-
-
-8. Renaming/moving/copying files or contents of files:
-
-  Git automatically tracks such changes, making those normal commits.
-
-    mv/cp path/file otherpath/otherfile
-
-    git add [-A] .
-
-    git commit
-
-  Do not move, rename or copy files of which you are not the maintainer without
-  discussing it on the mailing list first!
-
-9. Reverting broken commits
-
-    git revert <commit>
-
-  git revert will generate a revert commit. This will not make the faulty
-  commit disappear from the history.
-
-    git reset <commit>
-
-  git reset will uncommit the changes till <commit> rewriting the current
-  branch history.
-
-    git commit --amend
-
-  allows to amend the last commit details quickly.
-
-    git rebase -i origin/master
-
-  will replay local commits over the main repository allowing to edit,
-  merge or remove some of them in the process.
-
-  Note that the reset, commit --amend and rebase rewrite history, so you
-  should use them ONLY on your local or topic branches.
-
-  The main repository will reject those changes.
-
-10. Preparing a patchset.
-
-    git format-patch <commit> [-o directory]
-
-  will generate a set of patches for each commit between <commit> and
-  current HEAD. E.g.
-
-    git format-patch origin/master
-
-  will generate patches for all commits on current branch which are not
-  present in upstream.
-  A useful shortcut is also
-
-    git format-patch -n
-
-  which will generate patches from last n commits.
-  By default the patches are created in the current directory.
-
-11. Sending patches for review
-
-    git send-email <commit list|directory>
-
-  will send the patches created by git format-patch or directly generates
-  them. All the email fields can be configured in the global/local
-  configuration or overridden by command line.
-  Note that this tool must often be installed separately (e.g. git-email
-  package on Debian-based distros).
-
-12. Pushing changes to remote trees
-
-    git push
-
-  Will push the changes to the default remote (origin).
-  Git will prevent you from pushing changes if the local and remote trees are
-  out of sync. Refer to 2 and 2.a to sync the local tree.
-
-    git remote add <name> <url>
-
-  Will add additional remote with a name reference, it is useful if you want
-  to push your local branch for review on a remote host.
-
-    git push <remote> <refspec>
-
-  Will push the changes to the remote repository. Omitting refspec makes git
-  push update all the remote branches matching the local ones.
-
-13. Finding a specific svn revision
-
-  Since version 1.7.1 git supports ':/foo' syntax for specifying commits
-  based on a regular expression. see man gitrevisions
-
-    git show :/'as revision 23456'
-
-  will show the svn changeset r23456. With older git versions searching in
-  the git log output is the easiest option (especially if a pager with
-  search capabilities is used).
-  This commit can be checked out with
-
-    git checkout -b svn_23456 :/'as revision 23456'
-
-  or for git < 1.7.1 with
-
-    git checkout -b svn_23456 $SHA1
-
-  where $SHA1 is the commit SHA1 from the 'git log' output.
-
-
-Contact the project admins <root at ffmpeg dot org> if you have technical
-problems with the GIT server.

doc/hooks.texi

@@ -0,0 +1,299 @@
+\input texinfo @c -*- texinfo -*-
+
+@settitle Video Hook Documentation
+@titlepage
+@sp 7
+@center @titlefont{Video Hook Documentation}
+@sp 3
+@end titlepage
+
+
+@chapter Introduction
+
+@var{Please be aware that vhook is deprecated, and hence its development is
+frozen (bug fixes are still accepted).
+The substitute will be 'libavfilter', the result of our 'Video Filter API'
+Google Summer of Code project. You may monitor its progress by subscribing to
+the ffmpeg-soc mailing list at
+@url{http://lists.mplayerhq.hu/mailman/listinfo/ffmpeg-soc}.}
+
+The video hook functionality is designed (mostly) for live video. It allows
+the video to be modified or examined between the decoder and the encoder.
+
+Any number of hook modules can be placed inline, and they are run in the
+order that they were specified on the ffmpeg command line.
+
+The video hook modules are provided for use as a base for your own modules,
+and are described below.
+
+Modules are loaded using the -vhook option to ffmpeg. The value of this parameter
+is a space separated list of arguments. The first is the module name, and the rest
+are passed as arguments to the Configure function of the module.
+
+The modules are dynamic libraries: They have different suffixes (.so, .dll, .dylib)
+depending on your platform. And your platform dictates if they need to be
+somewhere in your PATH, or in your LD_LIBRARY_PATH. Otherwise you will need to
+specify the full path of the vhook file that you are using.
+
+@section null.c
+
+This does nothing. Actually it converts the input image to RGB24 and then converts
+it back again. This is meant as a sample that you can use to test your setup.
+
+@section fish.c
+
+This implements a 'fish detector'. Essentially it converts the image into HSV
+space and tests whether more than a certain percentage of the pixels fall into
+a specific HSV cuboid. If so, then the image is saved into a file for processing
+by other bits of code.
+
+Why use HSV? It turns out that HSV cuboids represent a more compact range of
+colors than would an RGB cuboid.
+
+@section imlib2.c
+
+This module implements a text overlay for a video image. Currently it
+supports a fixed overlay or reading the text from a file. The string
+is passed through strftime() so that it is easy to imprint the date and
+time onto the image.
+
+This module depends on the external library imlib2, available on
+Sourceforge, among other places, if it is not already installed on
+your system.
+
+You may also overlay an image (even semi-transparent) like TV stations do.
+You may move either the text or the image around your video to create
+scrolling credits, for example.
+
+The font file used is looked for in a FONTPATH environment variable, and
+prepended to the point size as a command line option and can be specified
+with the full path to the font file, as in:
+@example
+-F /usr/X11R6/lib/X11/fonts/TTF/VeraBd.ttf/20
+@end example
+where 20 is the point size.
+
+You can specify the filename to read RGB color names from. If it is not
+specified, these defaults are used: @file{/usr/share/X11/rgb.txt} and
+@file{/usr/lib/X11/rgb.txt}
+
+Options:
+@multitable @columnfractions .2 .8
+@item @option{-C <rgb.txt>}   @tab The filename to read RGB color names from
+@item @option{-c <color>}     @tab The color of the text
+@item @option{-F <fontname>}  @tab The font face and size
+@item @option{-t <text>}      @tab The text
+@item @option{-f <filename>}  @tab The filename to read text from
+@item @option{-x <expression>}@tab x coordinate of text or image
+@item @option{-y <expression>}@tab y coordinate of text or image
+@item @option{-i <filename>}  @tab The filename to read a image from
+@item @option{-R <expression>}@tab Value for R color
+@item @option{-G <expression>}@tab Value for G color
+@item @option{-B <expression>}@tab Value for B color
+@item @option{-A <expression>}@tab Value for Alpha channel
+@end multitable
+
+Expressions are functions of these variables:
+@multitable @columnfractions .2 .8
+@item @var{N} @tab frame number (starting at zero)
+@item @var{H} @tab frame height
+@item @var{W} @tab frame width
+@item @var{h} @tab image height
+@item @var{w} @tab image width
+@item @var{X} @tab previous x coordinate of text or image
+@item @var{Y} @tab previous y coordinate of text or image
+@end multitable
+
+You may also use the constants @var{PI}, @var{E}, and the math functions available at the
+FFmpeg formula evaluator at (@url{ffmpeg-doc.html#SEC13}), except @var{bits2qp(bits)}
+and @var{qp2bits(qp)}.
+
+Usage examples:
+
+@example
+   # Remember to set the path to your fonts
+   FONTPATH="/cygdrive/c/WINDOWS/Fonts/"
+   FONTPATH="$FONTPATH:/usr/share/imlib2/data/fonts/"
+   FONTPATH="$FONTPATH:/usr/X11R6/lib/X11/fonts/TTF/"
+   export FONTPATH
+
+   # Bulb dancing in a Lissajous pattern
+   ffmpeg -i input.avi -vhook \
+     'vhook/imlib2.dll -x W*(0.5+0.25*sin(N/47*PI))-w/2 -y H*(0.5+0.50*cos(N/97*PI))-h/2 -i /usr/share/imlib2/data/images/bulb.png' \
+     -acodec copy -sameq output.avi
+
+   # Text scrolling
+   ffmpeg -i input.avi -vhook \
+     'vhook/imlib2.dll -c red -F Vera.ttf/20 -x 150+0.5*N -y 70+0.25*N -t Hello' \
+     -acodec copy -sameq output.avi
+
+   # Date and time stamp, security-camera style:
+   ffmpeg -r 29.97 -s 320x256 -f video4linux -i /dev/video0 \
+     -vhook 'vhook/imlib2.so -x 0 -y 0 -i black-260x20.png' \
+     -vhook 'vhook/imlib2.so -c white -F VeraBd.ttf/12 -x 0 -y 0 -t %A-%D-%T' \
+     output.avi
+
+     In this example the video is captured from the first video capture card as a
+     320x256 AVI, and a black 260 by 20 pixel PNG image is placed in the upper
+     left corner, with the day, date and time overlaid on it in Vera Bold 12
+     point font. A simple black PNG file 260 pixels wide and 20 pixels tall
+     was created in the GIMP for this purpose.
+
+   # Scrolling credits from a text file
+   ffmpeg -i input.avi -vhook \
+     'vhook/imlib2.so -c white -F VeraBd.ttf/16 -x 100 -y -1.0*N -f credits.txt' \
+     -sameq output.avi
+
+     In this example, the text is stored in a file, and is positioned 100
+     pixels from the left hand edge of the video. The text is scrolled from the
+     bottom up. Making the y factor positive will scroll from the top down.
+     Increasing the magnitude of the y factor makes the text scroll faster,
+     decreasing it makes it scroll slower. Hint: Blank lines containing only
+     a newline are treated as end-of-file. To create blank lines, use lines
+     that consist of space characters only.
+
+   # Scrolling credits with custom color from a text file
+   ffmpeg -i input.avi -vhook \
+     'vhook/imlib2.so -C rgb.txt -c CustomColor1 -F VeraBd.ttf/16 -x 100 -y -1.0*N -f credits.txt' \
+     -sameq output.avi
+
+     This example does the same as the one above, but specifies an rgb.txt file
+     to be used, which has a custom-made color in it.
+
+   # Variable colors
+   ffmpeg -i input.avi -vhook \
+     'vhook/imlib2.so -t Hello -R abs(255*sin(N/47*PI)) -G abs(255*sin(N/47*PI)) -B abs(255*sin(N/47*PI))' \
+     -sameq output.avi
+
+     In this example, the color for the text goes up and down from black to
+     white.
+
+   # Text fade-out
+   ffmpeg -i input.avi -vhook \
+     'vhook/imlib2.so -t Hello -A max(0,255-exp(N/47))' \
+     -sameq output.avi
+
+     In this example, the text fades out in about 10 seconds for a 25 fps input
+     video file.
+
+   # scrolling credits from a graphics file
+   ffmpeg -sameq -i input.avi \
+     -vhook 'vhook/imlib2.so -x 0 -y -1.0*N -i credits.png' output.avi
+
+     In this example, a transparent PNG file the same width as the video
+     (e.g. 320 pixels), but very long, (e.g. 3000 pixels), was created, and
+     text, graphics, brushstrokes, etc, were added to the image. The image
+     is then scrolled up, from the bottom of the frame.
+
+@end example
+
+@section ppm.c
+
+It's basically a launch point for a PPM pipe, so you can use any
+executable (or script) which consumes a PPM on stdin and produces a PPM
+on stdout (and flushes each frame). The Netpbm utilities are a series of
+such programs.
+
+A list of them is here:
+
+@url{http://netpbm.sourceforge.net/doc/directory.html}
+
+Usage example:
+
+@example
+ffmpeg -i input -vhook "/path/to/ppm.so some-ppm-filter args" output
+@end example
+
+@section drawtext.c
+
+This module implements a text overlay for a video image. Currently it
+supports a fixed overlay or reading the text from a file. The string
+is passed through strftime() so that it is easy to imprint the date and
+time onto the image.
+
+Features:
+@itemize @minus
+@item TrueType, Type1 and others via the FreeType2 library
+@item Font kerning (better output)
+@item Line Wrap (put the text that doesn't fit one line on the next line)
+@item Background box (currently in development)
+@item Outline
+@end itemize
+
+Options:
+@multitable @columnfractions .2 .8
+@item @option{-c <color>}          @tab Foreground color of the text ('internet' way) <#RRGGBB> [default #FFFFFF]
+@item @option{-C <color>}          @tab Background color of the text ('internet' way) <#RRGGBB> [default #000000]
+@item @option{-f <font-filename>}  @tab font file to use
+@item @option{-t <text>}           @tab text to display
+@item @option{-T <filename>}       @tab file to read text from
+@item @option{-x <pos>}            @tab x coordinate of the start of the text
+@item @option{-y <pos>}            @tab y coordinate of the start of the text
+@end multitable
+
+Text fonts are being looked for in a FONTPATH environment variable.
+If the FONTPATH environment variable is not available, or is not checked by
+your target (i.e. Cygwin), then specify the full path to the font file as in:
+@example
+-f /usr/X11R6/lib/X11/fonts/TTF/VeraBd.ttf
+@end example
+
+Usage Example:
+@example
+   # Remember to set the path to your fonts
+   FONTPATH="/cygdrive/c/WINDOWS/Fonts/"
+   FONTPATH="$FONTPATH:/usr/share/imlib2/data/fonts/"
+   FONTPATH="$FONTPATH:/usr/X11R6/lib/X11/fonts/TTF/"
+   export FONTPATH
+
+   # Time and date display
+   ffmpeg -f video4linux2 -i /dev/video0 \
+   -vhook 'vhook/drawtext.so -f VeraBd.ttf -t %A-%D-%T' movie.mpg
+
+     This example grabs video from the first capture card and outputs it to an
+     MPEG video, and places "Weekday-dd/mm/yy-hh:mm:ss" at the top left of the
+     frame, updated every second, using the Vera Bold TrueType Font, which
+     should exist in: /usr/X11R6/lib/X11/fonts/TTF/
+@end example
+
+Check the man page for strftime() for all the various ways you can format
+the date and time.
+
+@section watermark.c
+
+Command Line options:
+@multitable @columnfractions .2 .8
+@item @option{-m [0|1]}            @tab Mode (default: 0, see below)
+@item @option{-t 000000 - FFFFFF}  @tab Threshold, six digit hex number
+@item @option{-f <filename>}       @tab Watermark image filename, must be specified!
+@end multitable
+
+MODE 0:
+ The watermark picture works like this (assuming color intensities 0..0xFF):
+ Per color do this:
+ If mask color is 0x80, no change to the original frame.
+ If mask color is < 0x80 the absolute difference is subtracted from the
+ frame. If result < 0, result = 0.
+ If mask color is > 0x80 the absolute difference is added to the
+ frame. If result > 0xFF, result = 0xFF.
+
+ You can override the 0x80 level with the -t flag. E.g. if threshold is
+ 000000 the color value of watermark is added to the destination.
+
+ This way a mask that is visible both in light and dark pictures can be made
+ (e.g. by using a picture generated by the Gimp and the bump map tool).
+
+ An example watermark file is at:
+ @url{http://engene.se/ffmpeg_watermark.gif}
+
+MODE 1:
+ Per color do this:
+ If mask color > threshold color then the watermark pixel is used.
+
+Example usage:
+@example
+   ffmpeg -i infile -vhook '/path/watermark.so -f wm.gif' -an out.mov
+   ffmpeg -i infile -vhook '/path/watermark.so -f wm.gif -m 1 -t 222222' -an out.mov
+@end example
+
+@bye

doc/indevs.texi

@@ -1,632 +0,0 @@
-@chapter Input Devices
-@c man begin INPUT DEVICES
-
-Input devices are configured elements in FFmpeg which allow to access
-the data coming from a multimedia device attached to your system.
-
-When you configure your FFmpeg build, all the supported input devices
-are enabled by default. You can list all available ones using the
-configure option "--list-indevs".
-
-You can disable all the input devices using the configure option
-"--disable-indevs", and selectively enable an input device using the
-option "--enable-indev=@var{INDEV}", or you can disable a particular
-input device using the option "--disable-indev=@var{INDEV}".
-
-The option "-formats" of the ff* tools will display the list of
-supported input devices (amongst the demuxers).
-
-A description of the currently available input devices follows.
-
-@section alsa
-
-ALSA (Advanced Linux Sound Architecture) input device.
-
-To enable this input device during configuration you need libasound
-installed on your system.
-
-This device allows capturing from an ALSA device. The name of the
-device to capture has to be an ALSA card identifier.
-
-An ALSA identifier has the syntax:
-@example
-hw:@var{CARD}[,@var{DEV}[,@var{SUBDEV}]]
-@end example
-
-where the @var{DEV} and @var{SUBDEV} components are optional.
-
-The three arguments (in order: @var{CARD},@var{DEV},@var{SUBDEV})
-specify card number or identifier, device number and subdevice number
-(-1 means any).
-
-To see the list of cards currently recognized by your system check the
-files @file{/proc/asound/cards} and @file{/proc/asound/devices}.
-
-For example to capture with @command{ffmpeg} from an ALSA device with
-card id 0, you may run the command:
-@example
-ffmpeg -f alsa -i hw:0 alsaout.wav
-@end example
-
-For more information see:
-@url{http://www.alsa-project.org/alsa-doc/alsa-lib/pcm.html}
-
-@section bktr
-
-BSD video input device.
-
-@section dshow
-
-Windows DirectShow input device.
-
-DirectShow support is enabled when FFmpeg is built with mingw-w64.
-Currently only audio and video devices are supported.
-
-Multiple devices may be opened as separate inputs, but they may also be
-opened on the same input, which should improve synchronism between them.
-
-The input name should be in the format:
-
-@example
-@var{TYPE}=@var{NAME}[:@var{TYPE}=@var{NAME}]
-@end example
-
-where @var{TYPE} can be either @var{audio} or @var{video},
-and @var{NAME} is the device's name.
-
-@subsection Options
-
-If no options are specified, the device's defaults are used.
-If the device does not support the requested options, it will
-fail to open.
-
-@table @option
-
-@item video_size
-Set the video size in the captured video.
-
-@item framerate
-Set the framerate in the captured video.
-
-@item sample_rate
-Set the sample rate (in Hz) of the captured audio.
-
-@item sample_size
-Set the sample size (in bits) of the captured audio.
-
-@item channels
-Set the number of channels in the captured audio.
-
-@item list_devices
-If set to @option{true}, print a list of devices and exit.
-
-@item list_options
-If set to @option{true}, print a list of selected device's options
-and exit.
-
-@item video_device_number
-Set video device number for devices with same name (starts at 0,
-defaults to 0).
-
-@item audio_device_number
-Set audio device number for devices with same name (starts at 0,
-defaults to 0).
-
-@end table
-
-@subsection Examples
-
-@itemize
-
-@item
-Print the list of DirectShow supported devices and exit:
-@example
-$ ffmpeg -list_devices true -f dshow -i dummy
-@end example
-
-@item
-Open video device @var{Camera}:
-@example
-$ ffmpeg -f dshow -i video="Camera"
-@end example
-
-@item
-Open second video device with name @var{Camera}:
-@example
-$ ffmpeg -f dshow -video_device_number 1 -i video="Camera"
-@end example
-
-@item
-Open video device @var{Camera} and audio device @var{Microphone}:
-@example
-$ ffmpeg -f dshow -i video="Camera":audio="Microphone"
-@end example
-
-@item
-Print the list of supported options in selected device and exit:
-@example
-$ ffmpeg -list_options true -f dshow -i video="Camera"
-@end example
-
-@end itemize
-
-@section dv1394
-
-Linux DV 1394 input device.
-
-@section fbdev
-
-Linux framebuffer input device.
-
-The Linux framebuffer is a graphic hardware-independent abstraction
-layer to show graphics on a computer monitor, typically on the
-console. It is accessed through a file device node, usually
-@file{/dev/fb0}.
-
-For more detailed information read the file
-Documentation/fb/framebuffer.txt included in the Linux source tree.
-
-To record from the framebuffer device @file{/dev/fb0} with
-@command{ffmpeg}:
-@example
-ffmpeg -f fbdev -r 10 -i /dev/fb0 out.avi
-@end example
-
-You can take a single screenshot image with the command:
-@example
-ffmpeg -f fbdev -frames:v 1 -r 1 -i /dev/fb0 screenshot.jpeg
-@end example
-
-See also @url{http://linux-fbdev.sourceforge.net/}, and fbset(1).
-
-@section jack
-
-JACK input device.
-
-To enable this input device during configuration you need libjack
-installed on your system.
-
-A JACK input device creates one or more JACK writable clients, one for
-each audio channel, with name @var{client_name}:input_@var{N}, where
-@var{client_name} is the name provided by the application, and @var{N}
-is a number which identifies the channel.
-Each writable client will send the acquired data to the FFmpeg input
-device.
-
-Once you have created one or more JACK readable clients, you need to
-connect them to one or more JACK writable clients.
-
-To connect or disconnect JACK clients you can use the @command{jack_connect}
-and @command{jack_disconnect} programs, or do it through a graphical interface,
-for example with @command{qjackctl}.
-
-To list the JACK clients and their properties you can invoke the command
-@command{jack_lsp}.
-
-Follows an example which shows how to capture a JACK readable client
-with @command{ffmpeg}.
-@example
-# Create a JACK writable client with name "ffmpeg".
-$ ffmpeg -f jack -i ffmpeg -y out.wav
-
-# Start the sample jack_metro readable client.
-$ jack_metro -b 120 -d 0.2 -f 4000
-
-# List the current JACK clients.
-$ jack_lsp -c
-system:capture_1
-system:capture_2
-system:playback_1
-system:playback_2
-ffmpeg:input_1
-metro:120_bpm
-
-# Connect metro to the ffmpeg writable client.
-$ jack_connect metro:120_bpm ffmpeg:input_1
-@end example
-
-For more information read:
-@url{http://jackaudio.org/}
-
-@section lavfi
-
-Libavfilter input virtual device.
-
-This input device reads data from the open output pads of a libavfilter
-filtergraph.
-
-For each filtergraph open output, the input device will create a
-corresponding stream which is mapped to the generated output. Currently
-only video data is supported. The filtergraph is specified through the
-option @option{graph}.
-
-@subsection Options
-
-@table @option
-
-@item graph
-Specify the filtergraph to use as input. Each video open output must be
-labelled by a unique string of the form "out@var{N}", where @var{N} is a
-number starting from 0 corresponding to the mapped input stream
-generated by the device.
-The first unlabelled output is automatically assigned to the "out0"
-label, but all the others need to be specified explicitly.
-
-If not specified defaults to the filename specified for the input
-device.
-@end table
-
-@subsection Examples
-
-@itemize
-@item
-Create a color video stream and play it back with @command{ffplay}:
-@example
-ffplay -f lavfi -graph "color=pink [out0]" dummy
-@end example
-
-@item
-As the previous example, but use filename for specifying the graph
-description, and omit the "out0" label:
-@example
-ffplay -f lavfi color=pink
-@end example
-
-@item
-Create three different video test filtered sources and play them:
-@example
-ffplay -f lavfi -graph "testsrc [out0]; testsrc,hflip [out1]; testsrc,negate [out2]" test3
-@end example
-
-@item
-Read an audio stream from a file using the amovie source and play it
-back with @command{ffplay}:
-@example
-ffplay -f lavfi "amovie=test.wav"
-@end example
-
-@item
-Read an audio stream and a video stream and play it back with
-@command{ffplay}:
-@example
-ffplay -f lavfi "movie=test.avi[out0];amovie=test.wav[out1]"
-@end example
-
-@end itemize
-
-@section libdc1394
-
-IIDC1394 input device, based on libdc1394 and libraw1394.
-
-@section openal
-
-The OpenAL input device provides audio capture on all systems with a
-working OpenAL 1.1 implementation.
-
-To enable this input device during configuration, you need OpenAL
-headers and libraries installed on your system, and need to configure
-FFmpeg with @code{--enable-openal}.
-
-OpenAL headers and libraries should be provided as part of your OpenAL
-implementation, or as an additional download (an SDK). Depending on your
-installation you may need to specify additional flags via the
-@code{--extra-cflags} and @code{--extra-ldflags} for allowing the build
-system to locate the OpenAL headers and libraries.
-
-An incomplete list of OpenAL implementations follows:
-
-@table @strong
-@item Creative
-The official Windows implementation, providing hardware acceleration
-with supported devices and software fallback.
-See @url{http://openal.org/}.
-@item OpenAL Soft
-Portable, open source (LGPL) software implementation. Includes
-backends for the most common sound APIs on the Windows, Linux,
-Solaris, and BSD operating systems.
-See @url{http://kcat.strangesoft.net/openal.html}.
-@item Apple
-OpenAL is part of Core Audio, the official Mac OS X Audio interface.
-See @url{http://developer.apple.com/technologies/mac/audio-and-video.html}
-@end table
-
-This device allows to capture from an audio input device handled
-through OpenAL.
-
-You need to specify the name of the device to capture in the provided
-filename. If the empty string is provided, the device will
-automatically select the default device. You can get the list of the
-supported devices by using the option @var{list_devices}.
-
-@subsection Options
-
-@table @option
-
-@item channels
-Set the number of channels in the captured audio. Only the values
-@option{1} (monaural) and @option{2} (stereo) are currently supported.
-Defaults to @option{2}.
-
-@item sample_size
-Set the sample size (in bits) of the captured audio. Only the values
-@option{8} and @option{16} are currently supported. Defaults to
-@option{16}.
-
-@item sample_rate
-Set the sample rate (in Hz) of the captured audio.
-Defaults to @option{44.1k}.
-
-@item list_devices
-If set to @option{true}, print a list of devices and exit.
-Defaults to @option{false}.
-
-@end table
-
-@subsection Examples
-
-Print the list of OpenAL supported devices and exit:
-@example
-$ ffmpeg -list_devices true -f openal -i dummy out.ogg
-@end example
-
-Capture from the OpenAL device @file{DR-BT101 via PulseAudio}:
-@example
-$ ffmpeg -f openal -i 'DR-BT101 via PulseAudio' out.ogg
-@end example
-
-Capture from the default device (note the empty string '' as filename):
-@example
-$ ffmpeg -f openal -i '' out.ogg
-@end example
-
-Capture from two devices simultaneously, writing to two different files,
-within the same @command{ffmpeg} command:
-@example
-$ ffmpeg -f openal -i 'DR-BT101 via PulseAudio' out1.ogg -f openal -i 'ALSA Default' out2.ogg
-@end example
-Note: not all OpenAL implementations support multiple simultaneous capture -
-try the latest OpenAL Soft if the above does not work.
-
-@section oss
-
-Open Sound System input device.
-
-The filename to provide to the input device is the device node
-representing the OSS input device, and is usually set to
-@file{/dev/dsp}.
-
-For example to grab from @file{/dev/dsp} using @command{ffmpeg} use the
-command:
-@example
-ffmpeg -f oss -i /dev/dsp /tmp/oss.wav
-@end example
-
-For more information about OSS see:
-@url{http://manuals.opensound.com/usersguide/dsp.html}
-
-@section pulse
-
-pulseaudio input device.
-
-To enable this input device during configuration you need libpulse-simple
-installed in your system.
-
-The filename to provide to the input device is a source device or the
-string "default"
-
-To list the pulse source devices and their properties you can invoke
-the command @command{pactl list sources}.
-
-@example
-ffmpeg -f pulse -i default /tmp/pulse.wav
-@end example
-
-@subsection @var{server} AVOption
-
-The syntax is:
-@example
--server @var{server name}
-@end example
-
-Connects to a specific server.
-
-@subsection @var{name} AVOption
-
-The syntax is:
-@example
--name @var{application name}
-@end example
-
-Specify the application name pulse will use when showing active clients,
-by default it is the LIBAVFORMAT_IDENT string
-
-@subsection @var{stream_name} AVOption
-
-The syntax is:
-@example
--stream_name @var{stream name}
-@end example
-
-Specify the stream name pulse will use when showing active streams,
-by default it is "record"
-
-@subsection @var{sample_rate} AVOption
-
-The syntax is:
-@example
--sample_rate @var{samplerate}
-@end example
-
-Specify the samplerate in Hz, by default 48kHz is used.
-
-@subsection @var{channels} AVOption
-
-The syntax is:
-@example
--channels @var{N}
-@end example
-
-Specify the channels in use, by default 2 (stereo) is set.
-
-@subsection @var{frame_size} AVOption
-
-The syntax is:
-@example
--frame_size @var{bytes}
-@end example
-
-Specify the number of byte per frame, by default it is set to 1024.
-
-@subsection @var{fragment_size} AVOption
-
-The syntax is:
-@example
--fragment_size @var{bytes}
-@end example
-
-Specify the minimal buffering fragment in pulseaudio, it will affect the
-audio latency. By default it is unset.
-
-@section sndio
-
-sndio input device.
-
-To enable this input device during configuration you need libsndio
-installed on your system.
-
-The filename to provide to the input device is the device node
-representing the sndio input device, and is usually set to
-@file{/dev/audio0}.
-
-For example to grab from @file{/dev/audio0} using @command{ffmpeg} use the
-command:
-@example
-ffmpeg -f sndio -i /dev/audio0 /tmp/oss.wav
-@end example
-
-@section video4linux and video4linux2
-
-Video4Linux and Video4Linux2 input video devices.
-
-The name of the device to grab is a file device node, usually Linux
-systems tend to automatically create such nodes when the device
-(e.g. an USB webcam) is plugged into the system, and has a name of the
-kind @file{/dev/video@var{N}}, where @var{N} is a number associated to
-the device.
-
-Video4Linux and Video4Linux2 devices only support a limited set of
-@var{width}x@var{height} sizes and framerates. You can check which are
-supported for example with the command @command{dov4l} for Video4Linux
-devices and using @command{-list_formats all} for Video4Linux2 devices.
-
-If the size for the device is set to 0x0, the input device will
-try to auto-detect the size to use.
-Only for the video4linux2 device, if the frame rate is set to 0/0 the
-input device will use the frame rate value already set in the driver.
-
-Video4Linux support is deprecated since Linux 2.6.30, and will be
-dropped in later versions.
-
-Note that if FFmpeg is build with v4l-utils support ("--enable-libv4l2"
-option), it will always be used.
-
-Follow some usage examples of the video4linux devices with the ff*
-tools.
-@example
-# Grab and show the input of a video4linux device, frame rate is set
-# to the default of 25/1.
-ffplay -s 320x240 -f video4linux /dev/video0
-
-# Grab and show the input of a video4linux2 device, auto-adjust size.
-ffplay -f video4linux2 /dev/video0
-
-# Grab and record the input of a video4linux2 device, auto-adjust size,
-# frame rate value defaults to 0/0 so it is read from the video4linux2
-# driver.
-ffmpeg -f video4linux2 -i /dev/video0 out.mpeg
-@end example
-
-"v4l" and "v4l2" can be used as aliases for the respective "video4linux" and
-"video4linux2".
-
-@section vfwcap
-
-VfW (Video for Windows) capture input device.
-
-The filename passed as input is the capture driver number, ranging from
-0 to 9. You may use "list" as filename to print a list of drivers. Any
-other filename will be interpreted as device number 0.
-
-@section x11grab
-
-X11 video input device.
-
-This device allows to capture a region of an X11 display.
-
-The filename passed as input has the syntax:
-@example
-[@var{hostname}]:@var{display_number}.@var{screen_number}[+@var{x_offset},@var{y_offset}]
-@end example
-
-@var{hostname}:@var{display_number}.@var{screen_number} specifies the
-X11 display name of the screen to grab from. @var{hostname} can be
-omitted, and defaults to "localhost". The environment variable
-@env{DISPLAY} contains the default display name.
-
-@var{x_offset} and @var{y_offset} specify the offsets of the grabbed
-area with respect to the top-left border of the X11 screen. They
-default to 0.
-
-Check the X11 documentation (e.g. man X) for more detailed information.
-
-Use the @command{dpyinfo} program for getting basic information about the
-properties of your X11 display (e.g. grep for "name" or "dimensions").
-
-For example to grab from @file{:0.0} using @command{ffmpeg}:
-@example
-ffmpeg -f x11grab -r 25 -s cif -i :0.0 out.mpg
-
-# Grab at position 10,20.
-ffmpeg -f x11grab -r 25 -s cif -i :0.0+10,20 out.mpg
-@end example
-
-@subsection @var{follow_mouse} AVOption
-
-The syntax is:
-@example
--follow_mouse centered|@var{PIXELS}
-@end example
-
-When it is specified with "centered", the grabbing region follows the mouse
-pointer and keeps the pointer at the center of region; otherwise, the region
-follows only when the mouse pointer reaches within @var{PIXELS} (greater than
-zero) to the edge of region.
-
-For example:
-@example
-ffmpeg -f x11grab -follow_mouse centered -r 25 -s cif -i :0.0 out.mpg
-
-# Follows only when the mouse pointer reaches within 100 pixels to edge
-ffmpeg -f x11grab -follow_mouse 100 -r 25 -s cif -i :0.0 out.mpg
-@end example
-
-@subsection @var{show_region} AVOption
-
-The syntax is:
-@example
--show_region 1
-@end example
-
-If @var{show_region} AVOption is specified with @var{1}, then the grabbing
-region will be indicated on screen. With this option, it's easy to know what is
-being grabbed if only a portion of the screen is grabbed.
-
-For example:
-@example
-ffmpeg -f x11grab -show_region 1 -r 25 -s cif -i :0.0+10,20 out.mpg
-
-# With follow_mouse
-ffmpeg -f x11grab -follow_mouse centered -show_region 1  -r 25 -s cif -i :0.0 out.mpg
-@end example
-
-@c man end INPUT DEVICES

doc/issue_tracker.txt

@@ -5,42 +5,49 @@ NOTE: This is a draft.
 
 Overview:
 ---------
-
-FFmpeg uses Trac for tracking issues, new issues and changes to
-existing issues can be done through a web interface.
-
-Issues can be different kinds of things we want to keep track of
-but that do not belong into the source tree itself. This includes
-bug reports, patches, feature requests and license violations. We
-might add more items to this list in the future, so feel free to
-propose a new `type of issue' on the ffmpeg-devel mailing list if
-you feel it is worth tracking.
-
+FFmpeg uses Roundup for tracking issues, new issues and changes to
+existing issues can be done through a web interface and through email.
 It is possible to subscribe to individual issues by adding yourself to the
-Cc list or to subscribe to the ffmpeg-trac mailing list which receives
-a mail for every change to every issue.
+nosy list or to subscribe to the ffmpeg-issues mailing list which receives
+a mail for every change to every issue. Replies to such mails will also
+be properly added to the respective issue.
 (the above does all work already after light testing)
-
-The subscription URL for the ffmpeg-trac list is:
-http(s)://ffmpeg.org/mailman/listinfo/ffmpeg-trac
+The subscription URL for the ffmpeg-issues list is:
+http://live.polito/mailman/listinfo/ffmpeg-issues
 The URL of the webinterface of the tracker is:
-http(s)://ffmpeg.org/trac/ffmpeg
+http(s)://roundup.ffmpeg/roundup/ffmpeg/
+Note the URLs in this document are obfuscated, you must append the top level
+domain for non-profit organizations to the tracker, and of Italy to the
+mailing list.
+
+Email Interface:
+----------------
+There is a mailing list to which all new issues and changes to existing issues
+are sent. You can subscribe through
+http://live.polito/mailman/listinfo/ffmpeg-issues
+Replies to messages there will have their text added to the specific issues.
+Attachments will be added as if they had been uploaded via the web interface.
+You can change the status, substatus, topic, ... by changing the subject in
+your reply like:
+Re: [issue94] register_avcodec and allcodecs.h [type=patch;status=open;substatus=approved]
+Roundup will then change things as you requested and remove the [...] from
+the subject before forwarding the mail to the mailing list.
+
+
+NOTE: issue = (bug report || patch || feature request)
 
 Type:
 -----
-bug / defect
+bug
     An error, flaw, mistake, failure, or fault in FFmpeg or libav* that
     prevents it from behaving as intended.
 
-feature request / enhancement
+feature request
     Request of support for encoding or decoding of a new codec, container
     or variant.
     Request of support for more, less or plain different output or behavior
     where the current implementation cannot be considered wrong.
 
-license violation
-    ticket to keep track of (L)GPL violations of ffmpeg by others
-
 patch
     A patch as generated by diff which conforms to the patch submission and
     development policy.
@@ -61,8 +68,6 @@ important
     the separation to normal is somewhat fuzzy.
     For feature requests this priority would be used for things many people
     want.
-    Regressions also should be marked as important, regressions are bugs that
-    don't exist in a past revision or another branch.
 
 normal
 
@@ -92,17 +97,6 @@ closed
     final state
 
 
-Analyzed flag:
---------------
-Bugs which have been analyzed and where it is understood what causes them
-and which exact chain of events triggers them. This analysis should be
-available as a message in the bug report.
-Note, do not change the status to analyzed without also providing a clear
-and understandable analysis.
-This state implicates that the bug either has been reproduced or that
-reproduction is not needed as the bug is already understood.
-
-
 Type/Status/Substatus:
 ----------
 */new/new
@@ -130,6 +124,24 @@ Type/Status/Substatus:
     Issues for which some information has been requested by the developers,
     but which has not been provided by anyone within reasonable time.
 
+bug/open/reproduced
+    Bugs which have been reproduced.
+
+bug/open/analyzed
+    Bugs which have been analyzed and where it is understood what causes them
+    and which exact chain of events triggers them. This analysis should be
+    available as a message in the bug report.
+    Note, do not change the status to analyzed without also providing a clear
+    and understandable analysis.
+    This state implicates that the bug either has been reproduced or that
+    reproduction is not needed as the bug is already understood.
+
+bug/open/needs_more_info
+    Bug reports which are incomplete and or where more information is needed
+    from the submitter or another person who can provide it.
+    This state implicates that the bug has not been analyzed or reproduced.
+    Note, the idea behind needs_more_info is to offload work from the
+    developers to the users whenever possible.
 
 bug/closed/fixed
     Bugs which have to the best of our knowledge been fixed.
@@ -163,6 +175,10 @@ patch/closed/applied
 patch/closed/rejected
     Patches which have been rejected.
 
+feature_request/open/needs_more_info
+    Feature requests where it is not clear what exactly is wanted
+    (these also could be closed as invalid ...).
+
 feature_request/closed/implemented
     Feature requests which have been implemented.
 
@@ -174,10 +190,12 @@ Note, please do not use type-status-substatus combinations other than the
 above without asking on ffmpeg-dev first!
 
 Note2, if you provide the requested info do not forget to remove the
-needs_more_info substatus.
+needs_more_info substate.
 
-Component:
-----------
+Topic:
+------
+A topic is a tag you should add to your issue in order to make grouping them
+easier.
 
 avcodec
     issues in libavcodec/*
@@ -197,9 +215,6 @@ ffmpeg
 ffplay
     issues in or related to ffplay.c
 
-ffprobe
-    issues in or related to ffprobe.c
-
 ffserver
     issues in or related to ffserver.c
 
@@ -207,7 +222,7 @@ build system
     issues in or related to configure/Makefile
 
 regression
-    bugs which were not present in a past revision
+    bugs which were working in a past revision
 
-trac
+roundup
     issues related to our issue tracker

doc/libavfilter.texi

@@ -1,92 +0,0 @@
-\input texinfo @c -*- texinfo -*-
-
-@settitle Libavfilter Documentation
-@titlepage
-@center @titlefont{Libavfilter Documentation}
-@end titlepage
-
-@top
-
-@contents
-
-@chapter Introduction
-
-Libavfilter is the filtering API of FFmpeg. It is the substitute of the
-now deprecated 'vhooks' and started as a Google Summer of Code project.
-
-Audio filtering integration into the main FFmpeg repository is a work in
-progress, so audio API and ABI should not be considered stable yet.
-
-@chapter Tutorial
-
-In libavfilter, it is possible for filters to have multiple inputs and
-multiple outputs.
-To illustrate the sorts of things that are possible, we can
-use a complex filter graph. For example, the following one:
-
-@example
-input --> split --> fifo -----------------------> overlay --> output
-            |                                        ^
-            |                                        |
-            +------> fifo --> crop --> vflip --------+
-@end example
-
-splits the stream in two streams, sends one stream through the crop filter
-and the vflip filter before merging it back with the other stream by
-overlaying it on top. You can use the following command to achieve this:
-
-@example
-ffmpeg -i input -vf "[in] split [T1], fifo, [T2] overlay=0:H/2 [out]; [T1] fifo, crop=iw:ih/2:0:ih/2, vflip [T2]" output
-@end example
-
-The result will be that in output the top half of the video is mirrored
-onto the bottom half.
-
-Video filters are loaded using the @var{-vf} option passed to
-@command{ffmpeg} or to @command{ffplay}. Filters in the same linear
-chain are separated by commas. In our example, @var{split, fifo,
-overlay} are in one linear chain, and @var{fifo, crop, vflip} are in
-another. The points where the linear chains join are labeled by names
-enclosed in square brackets. In our example, that is @var{[T1]} and
-@var{[T2]}. The magic labels @var{[in]} and @var{[out]} are the points
-where video is input and output.
-
-Some filters take in input a list of parameters: they are specified
-after the filter name and an equal sign, and are separated each other
-by a semicolon.
-
-There exist so-called @var{source filters} that do not have a video
-input, and we expect in the future some @var{sink filters} that will
-not have video output.
-
-@chapter graph2dot
-
-The @file{graph2dot} program included in the FFmpeg @file{tools}
-directory can be used to parse a filter graph description and issue a
-corresponding textual representation in the dot language.
-
-Invoke the command:
-@example
-graph2dot -h
-@end example
-
-to see how to use @file{graph2dot}.
-
-You can then pass the dot description to the @file{dot} program (from
-the graphviz suite of programs) and obtain a graphical representation
-of the filter graph.
-
-For example the sequence of commands:
-@example
-echo @var{GRAPH_DESCRIPTION} | \
-tools/graph2dot -o graph.tmp && \
-dot -Tpng graph.tmp -o graph.png && \
-display graph.png
-@end example
-
-can be used to create and display an image representing the graph
-described by the @var{GRAPH_DESCRIPTION} string.
-
-@include filters.texi
-
-@bye

doc/metadata.texi

@@ -1,68 +0,0 @@
-@chapter Metadata
-@c man begin METADATA
-
-FFmpeg is able to dump metadata from media files into a simple UTF-8-encoded
-INI-like text file and then load it back using the metadata muxer/demuxer.
-
-The file format is as follows:
-@enumerate
-
-@item
-A file consists of a header and a number of metadata tags divided into sections,
-each on its own line.
-
-@item
-The header is a ';FFMETADATA' string, followed by a version number (now 1).
-
-@item
-Metadata tags are of the form 'key=value'
-
-@item
-Immediately after header follows global metadata
-
-@item
-After global metadata there may be sections with per-stream/per-chapter
-metadata.
-
-@item
-A section starts with the section name in uppercase (i.e. STREAM or CHAPTER) in
-brackets ('[', ']') and ends with next section or end of file.
-
-@item
-At the beginning of a chapter section there may be an optional timebase to be
-used for start/end values. It must be in form 'TIMEBASE=num/den', where num and
-den are integers. If the timebase is missing then start/end times are assumed to
-be in milliseconds.
-Next a chapter section must contain chapter start and end times in form
-'START=num', 'END=num', where num is a positive integer.
-
-@item
-Empty lines and lines starting with ';' or '#' are ignored.
-
-@item
-Metadata keys or values containing special characters ('=', ';', '#', '\' and a
-newline) must be escaped with a backslash '\'.
-
-@item
-Note that whitespace in metadata (e.g. foo = bar) is considered to be a part of
-the tag (in the example above key is 'foo ', value is ' bar').
-@end enumerate
-
-A ffmetadata file might look like this:
-@example
-;FFMETADATA1
-title=bike\\shed
-;this is a comment
-artist=FFmpeg troll team
-
-[CHAPTER]
-TIMEBASE=1/1000
-START=0
-#chapter ends at 0:01:00
-END=60000
-title=chapter \#1
-[STREAM]
-title=multi\
-line
-@end example
-@c man end METADATA

doc/multithreading.txt

@@ -1,65 +0,0 @@
-FFmpeg multithreading methods
-==============================================
-
-FFmpeg provides two methods for multithreading codecs.
-
-Slice threading decodes multiple parts of a frame at the same time, using
-AVCodecContext execute() and execute2().
-
-Frame threading decodes multiple frames at the same time.
-It accepts N future frames and delays decoded pictures by N-1 frames.
-The later frames are decoded in separate threads while the user is
-displaying the current one.
-
-Restrictions on clients
-==============================================
-
-Slice threading -
-* The client's draw_horiz_band() must be thread-safe according to the comment
-  in avcodec.h.
-
-Frame threading -
-* Restrictions with slice threading also apply.
-* For best performance, the client should set thread_safe_callbacks if it
-  provides a thread-safe get_buffer() callback.
-* There is one frame of delay added for every thread beyond the first one.
-  Clients must be able to handle this; the pkt_dts and pkt_pts fields in
-  AVFrame will work as usual.
-
-Restrictions on codec implementations
-==============================================
-
-Slice threading -
- None except that there must be something worth executing in parallel.
-
-Frame threading -
-* Codecs can only accept entire pictures per packet.
-* Codecs similar to ffv1, whose streams don't reset across frames,
-  will not work because their bitstreams cannot be decoded in parallel.
-
-* The contents of buffers must not be read before ff_thread_await_progress()
-  has been called on them. reget_buffer() and buffer age optimizations no longer work.
-* The contents of buffers must not be written to after ff_thread_report_progress()
-  has been called on them. This includes draw_edges().
-
-Porting codecs to frame threading
-==============================================
-
-Find all context variables that are needed by the next frame. Move all
-code changing them, as well as code calling get_buffer(), up to before
-the decode process starts. Call ff_thread_finish_setup() afterwards. If
-some code can't be moved, have update_thread_context() run it in the next
-thread.
-
-If the codec allocates writable tables in its init(), add an init_thread_copy()
-which re-allocates them for other threads.
-
-Add CODEC_CAP_FRAME_THREADS to the codec capabilities. There will be very little
-speed gain at this point but it should work.
-
-Call ff_thread_report_progress() after some part of the current picture has decoded.
-A good place to put this is where draw_horiz_band() is called - add this if it isn't
-called anywhere, as it's useful too and the implementation is trivial when you're
-doing this. Note that draw_edges() needs to be called before reporting progress.
-
-Before accessing a reference frame or its MVs, call ff_thread_await_progress().

doc/muxers.texi

@@ -1,320 +0,0 @@
-@chapter Muxers
-@c man begin MUXERS
-
-Muxers are configured elements in FFmpeg which allow writing
-multimedia streams to a particular type of file.
-
-When you configure your FFmpeg build, all the supported muxers
-are enabled by default. You can list all available muxers using the
-configure option @code{--list-muxers}.
-
-You can disable all the muxers with the configure option
-@code{--disable-muxers} and selectively enable / disable single muxers
-with the options @code{--enable-muxer=@var{MUXER}} /
-@code{--disable-muxer=@var{MUXER}}.
-
-The option @code{-formats} of the ff* tools will display the list of
-enabled muxers.
-
-A description of some of the currently available muxers follows.
-
-@anchor{crc}
-@section crc
-
-CRC (Cyclic Redundancy Check) testing format.
-
-This muxer computes and prints the Adler-32 CRC of all the input audio
-and video frames. By default audio frames are converted to signed
-16-bit raw audio and video frames to raw video before computing the
-CRC.
-
-The output of the muxer consists of a single line of the form:
-CRC=0x@var{CRC}, where @var{CRC} is a hexadecimal number 0-padded to
-8 digits containing the CRC for all the decoded input frames.
-
-For example to compute the CRC of the input, and store it in the file
-@file{out.crc}:
-@example
-ffmpeg -i INPUT -f crc out.crc
-@end example
-
-You can print the CRC to stdout with the command:
-@example
-ffmpeg -i INPUT -f crc -
-@end example
-
-You can select the output format of each frame with @command{ffmpeg} by
-specifying the audio and video codec and format. For example to
-compute the CRC of the input audio converted to PCM unsigned 8-bit
-and the input video converted to MPEG-2 video, use the command:
-@example
-ffmpeg -i INPUT -c:a pcm_u8 -c:v mpeg2video -f crc -
-@end example
-
-See also the @ref{framecrc} muxer.
-
-@anchor{framecrc}
-@section framecrc
-
-Per-frame CRC (Cyclic Redundancy Check) testing format.
-
-This muxer computes and prints the Adler-32 CRC for each decoded audio
-and video frame. By default audio frames are converted to signed
-16-bit raw audio and video frames to raw video before computing the
-CRC.
-
-The output of the muxer consists of a line for each audio and video
-frame of the form: @var{stream_index}, @var{frame_dts},
-@var{frame_size}, 0x@var{CRC}, where @var{CRC} is a hexadecimal
-number 0-padded to 8 digits containing the CRC of the decoded frame.
-
-For example to compute the CRC of each decoded frame in the input, and
-store it in the file @file{out.crc}:
-@example
-ffmpeg -i INPUT -f framecrc out.crc
-@end example
-
-You can print the CRC of each decoded frame to stdout with the command:
-@example
-ffmpeg -i INPUT -f framecrc -
-@end example
-
-You can select the output format of each frame with @command{ffmpeg} by
-specifying the audio and video codec and format. For example, to
-compute the CRC of each decoded input audio frame converted to PCM
-unsigned 8-bit and of each decoded input video frame converted to
-MPEG-2 video, use the command:
-@example
-ffmpeg -i INPUT -c:a pcm_u8 -c:v mpeg2video -f framecrc -
-@end example
-
-See also the @ref{crc} muxer.
-
-@anchor{image2}
-@section image2
-
-Image file muxer.
-
-The image file muxer writes video frames to image files.
-
-The output filenames are specified by a pattern, which can be used to
-produce sequentially numbered series of files.
-The pattern may contain the string "%d" or "%0@var{N}d", this string
-specifies the position of the characters representing a numbering in
-the filenames. If the form "%0@var{N}d" is used, the string
-representing the number in each filename is 0-padded to @var{N}
-digits. The literal character '%' can be specified in the pattern with
-the string "%%".
-
-If the pattern contains "%d" or "%0@var{N}d", the first filename of
-the file list specified will contain the number 1, all the following
-numbers will be sequential.
-
-The pattern may contain a suffix which is used to automatically
-determine the format of the image files to write.
-
-For example the pattern "img-%03d.bmp" will specify a sequence of
-filenames of the form @file{img-001.bmp}, @file{img-002.bmp}, ...,
-@file{img-010.bmp}, etc.
-The pattern "img%%-%d.jpg" will specify a sequence of filenames of the
-form @file{img%-1.jpg}, @file{img%-2.jpg}, ..., @file{img%-10.jpg},
-etc.
-
-The following example shows how to use @command{ffmpeg} for creating a
-sequence of files @file{img-001.jpeg}, @file{img-002.jpeg}, ...,
-taking one image every second from the input video:
-@example
-ffmpeg -i in.avi -vsync 1 -r 1 -f image2 'img-%03d.jpeg'
-@end example
-
-Note that with @command{ffmpeg}, if the format is not specified with the
-@code{-f} option and the output filename specifies an image file
-format, the image2 muxer is automatically selected, so the previous
-command can be written as:
-@example
-ffmpeg -i in.avi -vsync 1 -r 1 'img-%03d.jpeg'
-@end example
-
-Note also that the pattern must not necessarily contain "%d" or
-"%0@var{N}d", for example to create a single image file
-@file{img.jpeg} from the input video you can employ the command:
-@example
-ffmpeg -i in.avi -f image2 -frames:v 1 img.jpeg
-@end example
-
-The image muxer supports the .Y.U.V image file format. This format is
-special in that that each image frame consists of three files, for
-each of the YUV420P components. To read or write this image file format,
-specify the name of the '.Y' file. The muxer will automatically open the
-'.U' and '.V' files as required.
-
-@section mov
-
-MOV / MP4 muxer
-
-The muxer options are:
-
-@table @option
-@item -moov_size @var{bytes}
-Reserves space for the moov atom at the beginning of the file instead of placing the
-moov atom at the end. If the space reserved is insufficient, muxing will fail.
-@end table
-
-@section mpegts
-
-MPEG transport stream muxer.
-
-This muxer implements ISO 13818-1 and part of ETSI EN 300 468.
-
-The muxer options are:
-
-@table @option
-@item -mpegts_original_network_id @var{number}
-Set the original_network_id (default 0x0001). This is unique identifier
-of a network in DVB. Its main use is in the unique identification of a
-service through the path Original_Network_ID, Transport_Stream_ID.
-@item -mpegts_transport_stream_id @var{number}
-Set the transport_stream_id (default 0x0001). This identifies a
-transponder in DVB.
-@item -mpegts_service_id @var{number}
-Set the service_id (default 0x0001) also known as program in DVB.
-@item -mpegts_pmt_start_pid @var{number}
-Set the first PID for PMT (default 0x1000, max 0x1f00).
-@item -mpegts_start_pid @var{number}
-Set the first PID for data packets (default 0x0100, max 0x0f00).
-@end table
-
-The recognized metadata settings in mpegts muxer are @code{service_provider}
-and @code{service_name}. If they are not set the default for
-@code{service_provider} is "FFmpeg" and the default for
-@code{service_name} is "Service01".
-
-@example
-ffmpeg -i file.mpg -c copy \
-     -mpegts_original_network_id 0x1122 \
-     -mpegts_transport_stream_id 0x3344 \
-     -mpegts_service_id 0x5566 \
-     -mpegts_pmt_start_pid 0x1500 \
-     -mpegts_start_pid 0x150 \
-     -metadata service_provider="Some provider" \
-     -metadata service_name="Some Channel" \
-     -y out.ts
-@end example
-
-@section null
-
-Null muxer.
-
-This muxer does not generate any output file, it is mainly useful for
-testing or benchmarking purposes.
-
-For example to benchmark decoding with @command{ffmpeg} you can use the
-command:
-@example
-ffmpeg -benchmark -i INPUT -f null out.null
-@end example
-
-Note that the above command does not read or write the @file{out.null}
-file, but specifying the output file is required by the @command{ffmpeg}
-syntax.
-
-Alternatively you can write the command as:
-@example
-ffmpeg -benchmark -i INPUT -f null -
-@end example
-
-@section matroska
-
-Matroska container muxer.
-
-This muxer implements the matroska and webm container specs.
-
-The recognized metadata settings in this muxer are:
-
-@table @option
-
-@item title=@var{title name}
-Name provided to a single track
-@end table
-
-@table @option
-
-@item language=@var{language name}
-Specifies the language of the track in the Matroska languages form
-@end table
-
-@table @option
-
-@item stereo_mode=@var{mode}
-Stereo 3D video layout of two views in a single video track
-@table @option
-@item mono
-video is not stereo
-@item left_right
-Both views are arranged side by side, Left-eye view is on the left
-@item bottom_top
-Both views are arranged in top-bottom orientation, Left-eye view is at bottom
-@item top_bottom
-Both views are arranged in top-bottom orientation, Left-eye view is on top
-@item checkerboard_rl
-Each view is arranged in a checkerboard interleaved pattern, Left-eye view being first
-@item checkerboard_lr
-Each view is arranged in a checkerboard interleaved pattern, Right-eye view being first
-@item row_interleaved_rl
-Each view is constituted by a row based interleaving, Right-eye view is first row
-@item row_interleaved_lr
-Each view is constituted by a row based interleaving, Left-eye view is first row
-@item col_interleaved_rl
-Both views are arranged in a column based interleaving manner, Right-eye view is first column
-@item col_interleaved_lr
-Both views are arranged in a column based interleaving manner, Left-eye view is first column
-@item anaglyph_cyan_red
-All frames are in anaglyph format viewable through red-cyan filters
-@item right_left
-Both views are arranged side by side, Right-eye view is on the left
-@item anaglyph_green_magenta
-All frames are in anaglyph format viewable through green-magenta filters
-@item block_lr
-Both eyes laced in one Block, Left-eye view is first
-@item block_rl
-Both eyes laced in one Block, Right-eye view is first
-@end table
-@end table
-
-For example a 3D WebM clip can be created using the following command line:
-@example
-ffmpeg -i sample_left_right_clip.mpg -an -c:v libvpx -metadata stereo_mode=left_right -y stereo_clip.webm
-@end example
-
-@section segment
-
-Basic stream segmenter.
-
-The segmenter muxer outputs streams to a number of separate files of nearly
-fixed duration. Output filename pattern can be set in a fashion similar to
-@ref{image2}.
-
-Every segment starts with a video keyframe, if a video stream is present.
-The segment muxer works best with a single constant frame rate video.
-
-Optionally it can generate a flat list of the created segments, one segment
-per line.
-
-@table @option
-@item segment_format @var{format}
-Override the inner container format, by default it is guessed by the filename
-extension.
-@item segment_time @var{t}
-Set segment duration to @var{t} seconds.
-@item segment_list @var{name}
-Generate also a listfile named @var{name}.
-@item segment_list_size @var{size}
-Overwrite the listfile once it reaches @var{size} entries.
-@end table
-
-@example
-ffmpeg -i in.mkv -c copy -map 0 -f segment -list out.list out%03d.nut
-@end example
-
-
-@c man end MUXERS

doc/optimization.txt

@@ -17,15 +17,15 @@ Understanding these overoptimized functions:
 As many functions tend to be a bit difficult to understand because
 of optimizations, it can be hard to optimize them further, or write
 architecture-specific versions. It is recommended to look at older
-revisions of the interesting files (web frontends for the various FFmpeg
-branches are listed at http://ffmpeg.org/download.html).
+revisions of the interesting files (for a web frontend try ViewVC at
+http://svn.ffmpeg.org/ffmpeg/trunk/).
 Alternatively, look into the other architecture-specific versions in
 the x86/, ppc/, alpha/ subdirectories. Even if you don't exactly
 comprehend the instructions, it could help understanding the functions
 and how they can be optimized.
 
 NOTE: If you still don't understand some function, ask at our mailing list!!!
-(http://lists.ffmpeg.org/mailman/listinfo/ffmpeg-devel)
+(http://lists.mplayerhq.hu/mailman/listinfo/ffmpeg-devel)
 
 
 When is an optimization justified?
@@ -157,68 +157,15 @@ Use asm loops like:
 __asm__(
     "1: ....
     ...
-    "jump_instruction ....
+    "jump_instruciton ....
 Do not use C loops:
 do{
     __asm__(
         ...
 }while()
 
-For x86, mark registers that are clobbered in your asm. This means both
-general x86 registers (e.g. eax) as well as XMM registers. This last one is
-particularly important on Win64, where xmm6-15 are callee-save, and not
-restoring their contents leads to undefined results. In external asm (e.g.
-yasm), you do this by using:
-cglobal functon_name, num_args, num_regs, num_xmm_regs
-In inline asm, you specify clobbered registers at the end of your asm:
-__asm__(".." ::: "%eax").
-If gcc is not set to support sse (-msse) it will not accept xmm registers
-in the clobber list. For that we use two macros to declare the clobbers.
-XMM_CLOBBERS should be used when there are other clobbers, for example:
-__asm__(".." ::: XMM_CLOBBERS("xmm0",) "eax");
-and XMM_CLOBBERS_ONLY should be used when the only clobbers are xmm registers:
-__asm__(".." :: XMM_CLOBBERS_ONLY("xmm0"));
-
-Do not expect a compiler to maintain values in your registers between separate
-(inline) asm code blocks. It is not required to. For example, this is bad:
-__asm__("movdqa %0, %%xmm7" : src);
-/* do something */
-__asm__("movdqa %%xmm7, %1" : dst);
-- first of all, you're assuming that the compiler will not use xmm7 in
-   between the two asm blocks.  It probably won't when you test it, but it's
-   a poor assumption that will break at some point for some --cpu compiler flag
-- secondly, you didn't mark xmm7 as clobbered. If you did, the compiler would
-   have restored the original value of xmm7 after the first asm block, thus
-   rendering the combination of the two blocks of code invalid
-Code that depends on data in registries being untouched, should be written as
-a single __asm__() statement. Ideally, a single function contains only one
-__asm__() block.
-
-Use external asm (nasm/yasm) or inline asm (__asm__()), do not use intrinsics.
-The latter requires a good optimizing compiler which gcc is not.
-
-Inline asm vs. external asm
----------------------------
-Both inline asm (__asm__("..") in a .c file, handled by a compiler such as gcc)
-and external asm (.s or .asm files, handled by an assembler such as yasm/nasm)
-are accepted in FFmpeg. Which one to use differs per specific case.
-
-- if your code is intended to be inlined in a C function, inline asm is always
-   better, because external asm cannot be inlined
-- if your code calls external functions, yasm is always better
-- if your code takes huge and complex structs as function arguments (e.g.
-   MpegEncContext; note that this is not ideal and is discouraged if there
-   are alternatives), then inline asm is always better, because predicting
-   member offsets in complex structs is almost impossible. It's safest to let
-   the compiler take care of that
-- in many cases, both can be used and it just depends on the preference of the
-   person writing the asm. For new asm, the choice is up to you. For existing
-   asm, you'll likely want to maintain whatever form it is currently in unless
-   there is a good reason to change it.
-- if, for some reason, you believe that a particular chunk of existing external
-   asm could be improved upon further if written in inline asm (or the other
-   way around), then please make the move from external asm <-> inline asm a
-   separate patch before your patches that actually improve the asm.
+Use __asm__() instead of intrinsics. The latter requires a good optimizing compiler
+which gcc is not.
 
 
 Links:

doc/outdevs.texi

@@ -1,73 +0,0 @@
-@chapter Output Devices
-@c man begin OUTPUT DEVICES
-
-Output devices are configured elements in FFmpeg which allow to write
-multimedia data to an output device attached to your system.
-
-When you configure your FFmpeg build, all the supported output devices
-are enabled by default. You can list all available ones using the
-configure option "--list-outdevs".
-
-You can disable all the output devices using the configure option
-"--disable-outdevs", and selectively enable an output device using the
-option "--enable-outdev=@var{OUTDEV}", or you can disable a particular
-input device using the option "--disable-outdev=@var{OUTDEV}".
-
-The option "-formats" of the ff* tools will display the list of
-enabled output devices (amongst the muxers).
-
-A description of the currently available output devices follows.
-
-@section alsa
-
-ALSA (Advanced Linux Sound Architecture) output device.
-
-@section oss
-
-OSS (Open Sound System) output device.
-
-@section sdl
-
-SDL (Simple DirectMedia Layer) output device.
-
-This output devices allows to show a video stream in an SDL
-window. Only one SDL window is allowed per application, so you can
-have only one instance of this output device in an application.
-
-To enable this output device you need libsdl installed on your system
-when configuring your build.
-
-For more information about SDL, check:
-@url{http://www.libsdl.org/}
-
-@subsection Options
-
-@table @option
-
-@item window_title
-Set the SDL window title, if not specified default to the filename
-specified for the output device.
-
-@item icon_title
-Set the name of the iconified SDL window, if not specified it is set
-to the same value of @var{window_title}.
-
-@item window_size
-Set the SDL window size, can be a string of the form
-@var{width}x@var{height} or a video size abbreviation.
-If not specified it defaults to the size of the input video.
-@end table
-
-@subsection Examples
-
-The following command shows the @command{ffmpeg} output is an
-SDL window, forcing its size to the qcif format:
-@example
-ffmpeg -i INPUT -vcodec rawvideo -pix_fmt yuv420p -window_size qcif -f sdl "SDL output"
-@end example
-
-@section sndio
-
-sndio audio output device.
-
-@c man end OUTPUT DEVICES

doc/platform.texi

@@ -1,390 +0,0 @@
-\input texinfo @c -*- texinfo -*-
-
-@settitle Platform Specific information
-@titlepage
-@center @titlefont{Platform Specific information}
-@end titlepage
-
-@top
-
-@contents
-
-@chapter Unix-like
-
-Some parts of FFmpeg cannot be built with version 2.15 of the GNU
-assembler which is still provided by a few AMD64 distributions. To
-make sure your compiler really uses the required version of gas
-after a binutils upgrade, run:
-
-@example
-$(gcc -print-prog-name=as) --version
-@end example
-
-If not, then you should install a different compiler that has no
-hard-coded path to gas. In the worst case pass @code{--disable-asm}
-to configure.
-
-@section BSD
-
-BSD make will not build FFmpeg, you need to install and use GNU Make
-(@file{gmake}).
-
-@section (Open)Solaris
-
-GNU Make is required to build FFmpeg, so you have to invoke (@file{gmake}),
-standard Solaris Make will not work. When building with a non-c99 front-end
-(gcc, generic suncc) add either @code{--extra-libs=/usr/lib/values-xpg6.o}
-or @code{--extra-libs=/usr/lib/64/values-xpg6.o} to the configure options
-since the libc is not c99-compliant by default. The probes performed by
-configure may raise an exception leading to the death of configure itself
-due to a bug in the system shell. Simply invoke a different shell such as
-bash directly to work around this:
-
-@example
-bash ./configure
-@end example
-
-@anchor{Darwin}
-@section Darwin (Mac OS X, iPhone)
-
-The toolchain provided with Xcode is sufficient to build the basic
-unacelerated code.
-
-Mac OS X on PowerPC or ARM (iPhone) requires a preprocessor from
-@url{http://github.com/yuvi/gas-preprocessor} to build the optimized
-assembler functions. Just download the Perl script and put it somewhere
-in your PATH, FFmpeg's configure will pick it up automatically.
-
-Mac OS X on amd64 and x86 requires @command{yasm} to build most of the
-optimized assembler functions. @uref{http://www.finkproject.org/, Fink},
-@uref{http://www.gentoo.org/proj/en/gentoo-alt/prefix/bootstrap-macos.xml, Gentoo Prefix},
-@uref{http://mxcl.github.com/homebrew/, Homebrew}
-or @uref{http://www.macports.org, MacPorts} can easily provide it.
-
-
-@chapter DOS
-
-Using a cross-compiler is preferred for various reasons.
-@url{http://www.delorie.com/howto/djgpp/linux-x-djgpp.html}
-
-
-@chapter OS/2
-
-For information about compiling FFmpeg on OS/2 see
-@url{http://www.edm2.com/index.php/FFmpeg}.
-
-
-@chapter Windows
-
-To get help and instructions for building FFmpeg under Windows, check out
-the FFmpeg Windows Help Forum at
-@url{http://ffmpeg.arrozcru.org/}.
-
-@section Native Windows compilation
-
-FFmpeg can be built to run natively on Windows using the MinGW tools. Install
-the latest versions of MSYS and MinGW from @url{http://www.mingw.org/}.
-You can find detailed installation instructions in the download
-section and the FAQ.
-
-FFmpeg does not build out-of-the-box with the packages the automated MinGW
-installer provides. It also requires coreutils to be installed and many other
-packages updated to the latest version. The minimum version for some packages
-are listed below:
-
-@itemize
-@item bash 3.1
-@item msys-make 3.81-2 (note: not mingw32-make)
-@item w32api 3.13
-@item mingw-runtime 3.15
-@end itemize
-
-FFmpeg automatically passes @code{-fno-common} to the compiler to work around
-a GCC bug (see @url{http://gcc.gnu.org/bugzilla/show_bug.cgi?id=37216}).
-
-Notes:
-
-@itemize
-
-@item Building natively using MSYS can be sped up by disabling implicit rules
-in the Makefile by calling @code{make -r} instead of plain @code{make}. This
-speed up is close to non-existent for normal one-off builds and is only
-noticeable when running make for a second time (for example in
-@code{make install}).
-
-@item In order to compile FFplay, you must have the MinGW development library
-of @uref{http://www.libsdl.org/, SDL}.
-Edit the @file{bin/sdl-config} script so that it points to the correct prefix
-where SDL was installed. Verify that @file{sdl-config} can be launched from
-the MSYS command line.
-
-@item By using @code{./configure --enable-shared} when configuring FFmpeg,
-you can build the FFmpeg libraries (e.g. libavutil, libavcodec,
-libavformat) as DLLs.
-
-@end itemize
-
-@section Microsoft Visual C++ compatibility
-
-As stated in the FAQ, FFmpeg will not compile under MSVC++. However, if you
-want to use the libav* libraries in your own applications, you can still
-compile those applications using MSVC++. But the libav* libraries you link
-to @emph{must} be built with MinGW. However, you will not be able to debug
-inside the libav* libraries, since MSVC++ does not recognize the debug
-symbols generated by GCC.
-We strongly recommend you to move over from MSVC++ to MinGW tools.
-
-This description of how to use the FFmpeg libraries with MSVC++ is based on
-Microsoft Visual C++ 2005 Express Edition. If you have a different version,
-you might have to modify the procedures slightly.
-
-@subsection Using static libraries
-
-Assuming you have just built and installed FFmpeg in @file{/usr/local}.
-
-@enumerate
-
-@item Create a new console application ("File / New / Project") and then
-select "Win32 Console Application". On the appropriate page of the
-Application Wizard, uncheck the "Precompiled headers" option.
-
-@item Write the source code for your application, or, for testing, just
-copy the code from an existing sample application into the source file
-that MSVC++ has already created for you. For example, you can copy
-@file{libavformat/output-example.c} from the FFmpeg distribution.
-
-@item Open the "Project / Properties" dialog box. In the "Configuration"
-combo box, select "All Configurations" so that the changes you make will
-affect both debug and release builds. In the tree view on the left hand
-side, select "C/C++ / General", then edit the "Additional Include
-Directories" setting to contain the path where the FFmpeg includes were
-installed (i.e. @file{c:\msys\1.0\local\include}).
-Do not add MinGW's include directory here, or the include files will
-conflict with MSVC's.
-
-@item Still in the "Project / Properties" dialog box, select
-"Linker / General" from the tree view and edit the
-"Additional Library Directories" setting to contain the @file{lib}
-directory where FFmpeg was installed (i.e. @file{c:\msys\1.0\local\lib}),
-the directory where MinGW libs are installed (i.e. @file{c:\mingw\lib}),
-and the directory where MinGW's GCC libs are installed
-(i.e. @file{C:\mingw\lib\gcc\mingw32\4.2.1-sjlj}). Then select
-"Linker / Input" from the tree view, and add the files @file{libavformat.a},
-@file{libavcodec.a}, @file{libavutil.a}, @file{libmingwex.a},
-@file{libgcc.a}, and any other libraries you used (i.e. @file{libz.a})
-to the end of "Additional Dependencies".
-
-@item Now, select "C/C++ / Code Generation" from the tree view. Select
-"Debug" in the "Configuration" combo box. Make sure that "Runtime
-Library" is set to "Multi-threaded Debug DLL". Then, select "Release" in
-the "Configuration" combo box and make sure that "Runtime Library" is
-set to "Multi-threaded DLL".
-
-@item Click "OK" to close the "Project / Properties" dialog box.
-
-@item MSVC++ lacks some C99 header files that are fundamental for FFmpeg.
-Get msinttypes from @url{http://code.google.com/p/msinttypes/downloads/list}
-and install it in MSVC++'s include directory
-(i.e. @file{C:\Program Files\Microsoft Visual Studio 8\VC\include}).
-
-@item MSVC++ also does not understand the @code{inline} keyword used by
-FFmpeg, so you must add this line before @code{#include}ing libav*:
-@example
-#define inline _inline
-@end example
-
-@item Build your application, everything should work.
-
-@end enumerate
-
-@subsection Using shared libraries
-
-This is how to create DLL and LIB files that are compatible with MSVC++:
-
-@enumerate
-
-@item Add a call to @file{vcvars32.bat} (which sets up the environment
-variables for the Visual C++ tools) as the first line of @file{msys.bat}.
-The standard location for @file{vcvars32.bat} is
-@file{C:\Program Files\Microsoft Visual Studio 8\VC\bin\vcvars32.bat},
-and the standard location for @file{msys.bat} is @file{C:\msys\1.0\msys.bat}.
-If this corresponds to your setup, add the following line as the first line
-of @file{msys.bat}:
-
-@example
-call "C:\Program Files\Microsoft Visual Studio 8\VC\bin\vcvars32.bat"
-@end example
-
-Alternatively, you may start the @file{Visual Studio 2005 Command Prompt},
-and run @file{c:\msys\1.0\msys.bat} from there.
-
-@item Within the MSYS shell, run @code{lib.exe}. If you get a help message
-from @file{Microsoft (R) Library Manager}, this means your environment
-variables are set up correctly, the @file{Microsoft (R) Library Manager}
-is on the path and will be used by FFmpeg to create
-MSVC++-compatible import libraries.
-
-@item Build FFmpeg with
-
-@example
-./configure --enable-shared
-make
-make install
-@end example
-
-Your install path (@file{/usr/local/} by default) should now have the
-necessary DLL and LIB files under the @file{bin} directory.
-
-@end enumerate
-
-Alternatively, build the libraries with a cross compiler, according to
-the instructions below in @ref{Cross compilation for Windows with Linux}.
-
-To use those files with MSVC++, do the same as you would do with
-the static libraries, as described above. But in Step 4,
-you should only need to add the directory where the LIB files are installed
-(i.e. @file{c:\msys\usr\local\bin}). This is not a typo, the LIB files are
-installed in the @file{bin} directory. And instead of adding the static
-libraries (@file{libxxx.a} files) you should add the MSVC import libraries
-(@file{avcodec.lib}, @file{avformat.lib}, and
-@file{avutil.lib}). Note that you should not use the GCC import
-libraries (@file{libxxx.dll.a} files), as these will give you undefined
-reference errors. There should be no need for @file{libmingwex.a},
-@file{libgcc.a}, and @file{wsock32.lib}, nor any other external library
-statically linked into the DLLs.
-
-FFmpeg headers do not declare global data for Windows DLLs through the usual
-dllexport/dllimport interface. Such data will be exported properly while
-building, but to use them in your MSVC++ code you will have to edit the
-appropriate headers and mark the data as dllimport. For example, in
-libavutil/pixdesc.h you should have:
-@example
-extern __declspec(dllimport) const AVPixFmtDescriptor av_pix_fmt_descriptors[];
-@end example
-
-Note that using import libraries created by dlltool requires
-the linker optimization option to be set to
-"References: Keep Unreferenced Data (@code{/OPT:NOREF})", otherwise
-the resulting binaries will fail during runtime. This isn't
-required when using import libraries generated by lib.exe.
-This issue is reported upstream at
-@url{http://sourceware.org/bugzilla/show_bug.cgi?id=12633}.
-
-To create import libraries that work with the @code{/OPT:REF} option
-(which is enabled by default in Release mode), follow these steps:
-
-@enumerate
-
-@item Open @file{Visual Studio 2005 Command Prompt}.
-
-Alternatively, in a normal command line prompt, call @file{vcvars32.bat}
-which sets up the environment variables for the Visual C++ tools
-(the standard location for this file is
-@file{C:\Program Files\Microsoft Visual Studio 8\VC\bin\vcvars32.bat}).
-
-@item Enter the @file{bin} directory where the created LIB and DLL files
-are stored.
-
-@item Generate new import libraries with @file{lib.exe}:
-
-@example
-lib /machine:i386 /def:..\lib\avcodec-53.def  /out:avcodec.lib
-lib /machine:i386 /def:..\lib\avdevice-53.def /out:avdevice.lib
-lib /machine:i386 /def:..\lib\avfilter-2.def  /out:avfilter.lib
-lib /machine:i386 /def:..\lib\avformat-53.def /out:avformat.lib
-lib /machine:i386 /def:..\lib\avutil-51.def   /out:avutil.lib
-lib /machine:i386 /def:..\lib\swscale-2.def   /out:swscale.lib
-@end example
-
-@end enumerate
-
-@anchor{Cross compilation for Windows with Linux}
-@section Cross compilation for Windows with Linux
-
-You must use the MinGW cross compilation tools available at
-@url{http://www.mingw.org/}.
-
-Then configure FFmpeg with the following options:
-@example
-./configure --target-os=mingw32 --cross-prefix=i386-mingw32msvc-
-@end example
-(you can change the cross-prefix according to the prefix chosen for the
-MinGW tools).
-
-Then you can easily test FFmpeg with @uref{http://www.winehq.com/, Wine}.
-
-@section Compilation under Cygwin
-
-Please use Cygwin 1.7.x as the obsolete 1.5.x Cygwin versions lack
-llrint() in its C library.
-
-Install your Cygwin with all the "Base" packages, plus the
-following "Devel" ones:
-@example
-binutils, gcc4-core, make, git, mingw-runtime, texi2html
-@end example
-
-And the following "Utils" one:
-@example
-diffutils
-@end example
-
-Then run
-
-@example
-./configure
-@end example
-
-to make a static build.
-
-The current @code{gcc4-core} package is buggy and needs this flag to build
-shared libraries:
-
-@example
-./configure --enable-shared --disable-static --extra-cflags=-fno-reorder-functions
-@end example
-
-If you want to build FFmpeg with additional libraries, download Cygwin
-"Devel" packages for Ogg and Vorbis from any Cygwin packages repository:
-@example
-libogg-devel, libvorbis-devel
-@end example
-
-These library packages are only available from
-@uref{http://sourceware.org/cygwinports/, Cygwin Ports}:
-
-@example
-yasm, libSDL-devel, libdirac-devel, libfaac-devel, libaacplus-devel, libgsm-devel,
-libmp3lame-devel, libschroedinger1.0-devel, speex-devel, libtheora-devel,
-libxvidcore-devel
-@end example
-
-The recommendation for libnut and x264 is to build them from source by
-yourself, as they evolve too quickly for Cygwin Ports to be up to date.
-
-Cygwin 1.7.x has IPv6 support. You can add IPv6 to Cygwin 1.5.x by means
-of the @code{libgetaddrinfo-devel} package, available at Cygwin Ports.
-
-@section Crosscompilation for Windows under Cygwin
-
-With Cygwin you can create Windows binaries that do not need the cygwin1.dll.
-
-Just install your Cygwin as explained before, plus these additional
-"Devel" packages:
-@example
-gcc-mingw-core, mingw-runtime, mingw-zlib
-@end example
-
-and add some special flags to your configure invocation.
-
-For a static build run
-@example
-./configure --target-os=mingw32 --extra-cflags=-mno-cygwin --extra-libs=-mno-cygwin
-@end example
-
-and for a build with shared libraries
-@example
-./configure --target-os=mingw32 --enable-shared --disable-static --extra-cflags=-mno-cygwin --extra-libs=-mno-cygwin
-@end example
-
-@bye

doc/protocols.texi

@@ -1,492 +0,0 @@
-@chapter Protocols
-@c man begin PROTOCOLS
-
-Protocols are configured elements in FFmpeg which allow to access
-resources which require the use of a particular protocol.
-
-When you configure your FFmpeg build, all the supported protocols are
-enabled by default. You can list all available ones using the
-configure option "--list-protocols".
-
-You can disable all the protocols using the configure option
-"--disable-protocols", and selectively enable a protocol using the
-option "--enable-protocol=@var{PROTOCOL}", or you can disable a
-particular protocol using the option
-"--disable-protocol=@var{PROTOCOL}".
-
-The option "-protocols" of the ff* tools will display the list of
-supported protocols.
-
-A description of the currently available protocols follows.
-
-@section applehttp
-
-Read Apple HTTP Live Streaming compliant segmented stream as
-a uniform one. The M3U8 playlists describing the segments can be
-remote HTTP resources or local files, accessed using the standard
-file protocol.
-HTTP is default, specific protocol can be declared by specifying
-"+@var{proto}" after the applehttp URI scheme name, where @var{proto}
-is either "file" or "http".
-
-@example
-applehttp://host/path/to/remote/resource.m3u8
-applehttp+http://host/path/to/remote/resource.m3u8
-applehttp+file://path/to/local/resource.m3u8
-@end example
-
-@section concat
-
-Physical concatenation protocol.
-
-Allow to read and seek from many resource in sequence as if they were
-a unique resource.
-
-A URL accepted by this protocol has the syntax:
-@example
-concat:@var{URL1}|@var{URL2}|...|@var{URLN}
-@end example
-
-where @var{URL1}, @var{URL2}, ..., @var{URLN} are the urls of the
-resource to be concatenated, each one possibly specifying a distinct
-protocol.
-
-For example to read a sequence of files @file{split1.mpeg},
-@file{split2.mpeg}, @file{split3.mpeg} with @command{ffplay} use the
-command:
-@example
-ffplay concat:split1.mpeg\|split2.mpeg\|split3.mpeg
-@end example
-
-Note that you may need to escape the character "|" which is special for
-many shells.
-
-@section file
-
-File access protocol.
-
-Allow to read from or read to a file.
-
-For example to read from a file @file{input.mpeg} with @command{ffmpeg}
-use the command:
-@example
-ffmpeg -i file:input.mpeg output.mpeg
-@end example
-
-The ff* tools default to the file protocol, that is a resource
-specified with the name "FILE.mpeg" is interpreted as the URL
-"file:FILE.mpeg".
-
-@section gopher
-
-Gopher protocol.
-
-@section http
-
-HTTP (Hyper Text Transfer Protocol).
-
-@section mmst
-
-MMS (Microsoft Media Server) protocol over TCP.
-
-@section mmsh
-
-MMS (Microsoft Media Server) protocol over HTTP.
-
-The required syntax is:
-@example
-mmsh://@var{server}[:@var{port}][/@var{app}][/@var{playpath}]
-@end example
-
-@section md5
-
-MD5 output protocol.
-
-Computes the MD5 hash of the data to be written, and on close writes
-this to the designated output or stdout if none is specified. It can
-be used to test muxers without writing an actual file.
-
-Some examples follow.
-@example
-# Write the MD5 hash of the encoded AVI file to the file output.avi.md5.
-ffmpeg -i input.flv -f avi -y md5:output.avi.md5
-
-# Write the MD5 hash of the encoded AVI file to stdout.
-ffmpeg -i input.flv -f avi -y md5:
-@end example
-
-Note that some formats (typically MOV) require the output protocol to
-be seekable, so they will fail with the MD5 output protocol.
-
-@section pipe
-
-UNIX pipe access protocol.
-
-Allow to read and write from UNIX pipes.
-
-The accepted syntax is:
-@example
-pipe:[@var{number}]
-@end example
-
-@var{number} is the number corresponding to the file descriptor of the
-pipe (e.g. 0 for stdin, 1 for stdout, 2 for stderr).  If @var{number}
-is not specified, by default the stdout file descriptor will be used
-for writing, stdin for reading.
-
-For example to read from stdin with @command{ffmpeg}:
-@example
-cat test.wav | ffmpeg -i pipe:0
-# ...this is the same as...
-cat test.wav | ffmpeg -i pipe:
-@end example
-
-For writing to stdout with @command{ffmpeg}:
-@example
-ffmpeg -i test.wav -f avi pipe:1 | cat > test.avi
-# ...this is the same as...
-ffmpeg -i test.wav -f avi pipe: | cat > test.avi
-@end example
-
-Note that some formats (typically MOV), require the output protocol to
-be seekable, so they will fail with the pipe output protocol.
-
-@section rtmp
-
-Real-Time Messaging Protocol.
-
-The Real-Time Messaging Protocol (RTMP) is used for streaming multimedia
-content across a TCP/IP network.
-
-The required syntax is:
-@example
-rtmp://@var{server}[:@var{port}][/@var{app}][/@var{playpath}]
-@end example
-
-The accepted parameters are:
-@table @option
-
-@item server
-The address of the RTMP server.
-
-@item port
-The number of the TCP port to use (by default is 1935).
-
-@item app
-It is the name of the application to access. It usually corresponds to
-the path where the application is installed on the RTMP server
-(e.g. @file{/ondemand/}, @file{/flash/live/}, etc.).
-
-@item playpath
-It is the path or name of the resource to play with reference to the
-application specified in @var{app}, may be prefixed by "mp4:".
-
-@end table
-
-For example to read with @command{ffplay} a multimedia resource named
-"sample" from the application "vod" from an RTMP server "myserver":
-@example
-ffplay rtmp://myserver/vod/sample
-@end example
-
-@section rtmp, rtmpe, rtmps, rtmpt, rtmpte
-
-Real-Time Messaging Protocol and its variants supported through
-librtmp.
-
-Requires the presence of the librtmp headers and library during
-configuration. You need to explicitly configure the build with
-"--enable-librtmp". If enabled this will replace the native RTMP
-protocol.
-
-This protocol provides most client functions and a few server
-functions needed to support RTMP, RTMP tunneled in HTTP (RTMPT),
-encrypted RTMP (RTMPE), RTMP over SSL/TLS (RTMPS) and tunneled
-variants of these encrypted types (RTMPTE, RTMPTS).
-
-The required syntax is:
-@example
-@var{rtmp_proto}://@var{server}[:@var{port}][/@var{app}][/@var{playpath}] @var{options}
-@end example
-
-where @var{rtmp_proto} is one of the strings "rtmp", "rtmpt", "rtmpe",
-"rtmps", "rtmpte", "rtmpts" corresponding to each RTMP variant, and
-@var{server}, @var{port}, @var{app} and @var{playpath} have the same
-meaning as specified for the RTMP native protocol.
-@var{options} contains a list of space-separated options of the form
-@var{key}=@var{val}.
-
-See the librtmp manual page (man 3 librtmp) for more information.
-
-For example, to stream a file in real-time to an RTMP server using
-@command{ffmpeg}:
-@example
-ffmpeg -re -i myfile -f flv rtmp://myserver/live/mystream
-@end example
-
-To play the same stream using @command{ffplay}:
-@example
-ffplay "rtmp://myserver/live/mystream live=1"
-@end example
-
-@section rtp
-
-Real-Time Protocol.
-
-@section rtsp
-
-RTSP is not technically a protocol handler in libavformat, it is a demuxer
-and muxer. The demuxer supports both normal RTSP (with data transferred
-over RTP; this is used by e.g. Apple and Microsoft) and Real-RTSP (with
-data transferred over RDT).
-
-The muxer can be used to send a stream using RTSP ANNOUNCE to a server
-supporting it (currently Darwin Streaming Server and Mischa Spiegelmock's
-@uref{http://github.com/revmischa/rtsp-server, RTSP server}).
-
-The required syntax for a RTSP url is:
-@example
-rtsp://@var{hostname}[:@var{port}]/@var{path}
-@end example
-
-The following options (set on the @command{ffmpeg}/@command{ffplay} command
-line, or set in code via @code{AVOption}s or in @code{avformat_open_input}),
-are supported:
-
-Flags for @code{rtsp_transport}:
-
-@table @option
-
-@item udp
-Use UDP as lower transport protocol.
-
-@item tcp
-Use TCP (interleaving within the RTSP control channel) as lower
-transport protocol.
-
-@item udp_multicast
-Use UDP multicast as lower transport protocol.
-
-@item http
-Use HTTP tunneling as lower transport protocol, which is useful for
-passing proxies.
-@end table
-
-Multiple lower transport protocols may be specified, in that case they are
-tried one at a time (if the setup of one fails, the next one is tried).
-For the muxer, only the @code{tcp} and @code{udp} options are supported.
-
-Flags for @code{rtsp_flags}:
-
-@table @option
-@item filter_src
-Accept packets only from negotiated peer address and port.
-@end table
-
-When receiving data over UDP, the demuxer tries to reorder received packets
-(since they may arrive out of order, or packets may get lost totally). In
-order for this to be enabled, a maximum delay must be specified in the
-@code{max_delay} field of AVFormatContext.
-
-When watching multi-bitrate Real-RTSP streams with @command{ffplay}, the
-streams to display can be chosen with @code{-vst} @var{n} and
-@code{-ast} @var{n} for video and audio respectively, and can be switched
-on the fly by pressing @code{v} and @code{a}.
-
-Example command lines:
-
-To watch a stream over UDP, with a max reordering delay of 0.5 seconds:
-
-@example
-ffplay -max_delay 500000 -rtsp_transport udp rtsp://server/video.mp4
-@end example
-
-To watch a stream tunneled over HTTP:
-
-@example
-ffplay -rtsp_transport http rtsp://server/video.mp4
-@end example
-
-To send a stream in realtime to a RTSP server, for others to watch:
-
-@example
-ffmpeg -re -i @var{input} -f rtsp -muxdelay 0.1 rtsp://server/live.sdp
-@end example
-
-@section sap
-
-Session Announcement Protocol (RFC 2974). This is not technically a
-protocol handler in libavformat, it is a muxer and demuxer.
-It is used for signalling of RTP streams, by announcing the SDP for the
-streams regularly on a separate port.
-
-@subsection Muxer
-
-The syntax for a SAP url given to the muxer is:
-@example
-sap://@var{destination}[:@var{port}][?@var{options}]
-@end example
-
-The RTP packets are sent to @var{destination} on port @var{port},
-or to port 5004 if no port is specified.
-@var{options} is a @code{&}-separated list. The following options
-are supported:
-
-@table @option
-
-@item announce_addr=@var{address}
-Specify the destination IP address for sending the announcements to.
-If omitted, the announcements are sent to the commonly used SAP
-announcement multicast address 224.2.127.254 (sap.mcast.net), or
-ff0e::2:7ffe if @var{destination} is an IPv6 address.
-
-@item announce_port=@var{port}
-Specify the port to send the announcements on, defaults to
-9875 if not specified.
-
-@item ttl=@var{ttl}
-Specify the time to live value for the announcements and RTP packets,
-defaults to 255.
-
-@item same_port=@var{0|1}
-If set to 1, send all RTP streams on the same port pair. If zero (the
-default), all streams are sent on unique ports, with each stream on a
-port 2 numbers higher than the previous.
-VLC/Live555 requires this to be set to 1, to be able to receive the stream.
-The RTP stack in libavformat for receiving requires all streams to be sent
-on unique ports.
-@end table
-
-Example command lines follow.
-
-To broadcast a stream on the local subnet, for watching in VLC:
-
-@example
-ffmpeg -re -i @var{input} -f sap sap://224.0.0.255?same_port=1
-@end example
-
-Similarly, for watching in @command{ffplay}:
-
-@example
-ffmpeg -re -i @var{input} -f sap sap://224.0.0.255
-@end example
-
-And for watching in @command{ffplay}, over IPv6:
-
-@example
-ffmpeg -re -i @var{input} -f sap sap://[ff0e::1:2:3:4]
-@end example
-
-@subsection Demuxer
-
-The syntax for a SAP url given to the demuxer is:
-@example
-sap://[@var{address}][:@var{port}]
-@end example
-
-@var{address} is the multicast address to listen for announcements on,
-if omitted, the default 224.2.127.254 (sap.mcast.net) is used. @var{port}
-is the port that is listened on, 9875 if omitted.
-
-The demuxers listens for announcements on the given address and port.
-Once an announcement is received, it tries to receive that particular stream.
-
-Example command lines follow.
-
-To play back the first stream announced on the normal SAP multicast address:
-
-@example
-ffplay sap://
-@end example
-
-To play back the first stream announced on one the default IPv6 SAP multicast address:
-
-@example
-ffplay sap://[ff0e::2:7ffe]
-@end example
-
-@section tcp
-
-Trasmission Control Protocol.
-
-The required syntax for a TCP url is:
-@example
-tcp://@var{hostname}:@var{port}[?@var{options}]
-@end example
-
-@table @option
-
-@item listen
-Listen for an incoming connection
-
-@example
-ffmpeg -i @var{input} -f @var{format} tcp://@var{hostname}:@var{port}?listen
-ffplay tcp://@var{hostname}:@var{port}
-@end example
-
-@end table
-
-@section udp
-
-User Datagram Protocol.
-
-The required syntax for a UDP url is:
-@example
-udp://@var{hostname}:@var{port}[?@var{options}]
-@end example
-
-@var{options} contains a list of &-seperated options of the form @var{key}=@var{val}.
-Follow the list of supported options.
-
-@table @option
-
-@item buffer_size=@var{size}
-set the UDP buffer size in bytes
-
-@item localport=@var{port}
-override the local UDP port to bind with
-
-@item localaddr=@var{addr}
-Choose the local IP address. This is useful e.g. if sending multicast
-and the host has multiple interfaces, where the user can choose
-which interface to send on by specifying the IP address of that interface.
-
-@item pkt_size=@var{size}
-set the size in bytes of UDP packets
-
-@item reuse=@var{1|0}
-explicitly allow or disallow reusing UDP sockets
-
-@item ttl=@var{ttl}
-set the time to live value (for multicast only)
-
-@item connect=@var{1|0}
-Initialize the UDP socket with @code{connect()}. In this case, the
-destination address can't be changed with ff_udp_set_remote_url later.
-If the destination address isn't known at the start, this option can
-be specified in ff_udp_set_remote_url, too.
-This allows finding out the source address for the packets with getsockname,
-and makes writes return with AVERROR(ECONNREFUSED) if "destination
-unreachable" is received.
-For receiving, this gives the benefit of only receiving packets from
-the specified peer address/port.
-@end table
-
-Some usage examples of the udp protocol with @command{ffmpeg} follow.
-
-To stream over UDP to a remote endpoint:
-@example
-ffmpeg -i @var{input} -f @var{format} udp://@var{hostname}:@var{port}
-@end example
-
-To stream in mpegts format over UDP using 188 sized UDP packets, using a large input buffer:
-@example
-ffmpeg -i @var{input} -f mpegts udp://@var{hostname}:@var{port}?pkt_size=188&buffer_size=65535
-@end example
-
-To receive over UDP from a remote endpoint:
-@example
-ffmpeg -i udp://[@var{multicast-address}]:@var{port}
-@end example
-
-@c man end PROTOCOLS

doc/rate_distortion.txt

@@ -1,61 +0,0 @@
-A Quick Description Of Rate Distortion Theory.
-
-We want to encode a video, picture or piece of music optimally. What does
-"optimally" really mean? It means that we want to get the best quality at a
-given filesize OR we want to get the smallest filesize at a given quality
-(in practice, these 2 goals are usually the same).
-
-Solving this directly is not practical; trying all byte sequences 1
-megabyte in length and selecting the "best looking" sequence will yield
-256^1000000 cases to try.
-
-But first, a word about quality, which is also called distortion.
-Distortion can be quantified by almost any quality measurement one chooses.
-Commonly, the sum of squared differences is used but more complex methods
-that consider psychovisual effects can be used as well. It makes no
-difference in this discussion.
-
-
-First step: that rate distortion factor called lambda...
-Let's consider the problem of minimizing:
-
-  distortion + lambda*rate
-
-rate is the filesize
-distortion is the quality
-lambda is a fixed value choosen as a tradeoff between quality and filesize
-Is this equivalent to finding the best quality for a given max
-filesize? The answer is yes. For each filesize limit there is some lambda
-factor for which minimizing above will get you the best quality (using your
-chosen quality measurement) at the desired (or lower) filesize.
-
-
-Second step: splitting the problem.
-Directly splitting the problem of finding the best quality at a given
-filesize is hard because we do not know how many bits from the total
-filesize should be allocated to each of the subproblems. But the formula
-from above:
-
-  distortion + lambda*rate
-
-can be trivially split. Consider:
-
-  (distortion0 + distortion1) + lambda*(rate0 + rate1)
-
-This creates a problem made of 2 independent subproblems. The subproblems
-might be 2 16x16 macroblocks in a frame of 32x16 size. To minimize:
-
-  (distortion0 + distortion1) + lambda*(rate0 + rate1)
-
-we just have to minimize:
-
-  distortion0 + lambda*rate0
-
-and
-
-  distortion1 + lambda*rate1
-
-I.e, the 2 problems can be solved independently.
-
-Author: Michael Niedermayer
-Copyright: LGPL

doc/soc.txt

@@ -9,16 +9,16 @@ it's a little late for this year's soc (2006).
 The Goal:
 Our goal in respect to soc is and must be of course exactly one thing and
 that is to improve FFmpeg, to reach this goal, code must
-* conform to the development policy and patch submission guidelines
+* conform to the svn policy and patch submission guidelines
 * must improve FFmpeg somehow (faster, smaller, "better",
   more codecs supported, fewer bugs, cleaner, ...)
 
 for mentors and other developers to help students to reach that goal it is
 essential that changes to their codebase are publicly visible, clean and
 easy reviewable that again leads us to:
-* use of a revision control system like git
+* use of a revision control system like svn
 * separation of cosmetic from non-cosmetic changes (this is almost entirely
-  ignored by mentors and students in soc 2006 which might lead to a surprise
+  ignored by mentors and students in soc 2006 which might lead to a suprise
   when the code will be reviewed at the end before a possible inclusion in
   FFmpeg, individual changes were generally not reviewable due to cosmetics).
 * frequent commits, so that comments can be provided early

doc/swresample.txt

@@ -1,46 +0,0 @@
-    The official guide to swresample for confused developers.
-   =========================================================
-
-Current (simplified) Architecture:
----------------------------------
-                        Input
-                          v
-       __________________/|\___________
-      /                   |            \
-     /    input sample format convert   v
-    /                     | ___________/
-    |                     |/
-    |                     v
-    |         ___________/|\___________              _____________
-    |        /            |            \            |             |
-    |   Rematrix          |          resample <---->|   Buffers   |
-    |        \___________ | ___________/            |_____________|
-    v                    \|/
-Special Converter         v
-    v         ___________/|\___________              _____________
-    |        /            |            \            |             |
-    |   Rematrix          |          resample <---->|   Buffers   |
-    |        \___________ | ___________/            |_____________|
-    |                    \|/
-    |                     v
-    |                     |\___________
-    \                     |            \
-     \   output sample format convert   v
-      \_________________  | ___________/
-                         \|/
-                          v
-                        Output
-
-Planar/Packed convertion is done when needed during sample format convertion
-Every step can be skiped without memcpy when its not needed.
-Either Resampling and Rematrixing can be performed first depending on which
-way its faster.
-The Buffers are needed for resampling due to resamplng being a process that
-requires future and past data, it thus also introduces inevitably a delay when
-used.
-Internally 32bit float and 16bit int is supported currently, other formats can
-easily be added
-Externally all sample formats in packed and planar configuration are supported
-Its also trivial to add special converters for common cases
-If only sample format and or packed/planar convertion is needed it
-is performed from input to output directly in a single pass with no intermediates.

doc/swscale.txt

@@ -30,7 +30,7 @@ slices, that is, consecutive non-overlapping rectangles of dimension
 
 special converter
     These generally are unscaled converters of common
-    formats, like YUV 4:2:0/4:2:2 -> RGB12/15/16/24/32. Though it could also
+    formats, like YUV 4:2:0/4:2:2 -> RGB15/16/24/32. Though it could also
     in principle contain scalers optimized for specific common cases.
 
 Main path

doc/t2h.init

@@ -1,170 +0,0 @@
-# no horiz rules between sections
-$end_section = \&FFmpeg_end_section;
-sub FFmpeg_end_section($$)
-{
-}
-
-$EXTRA_HEAD =
-'<link rel="icon" href="favicon.png" type="image/png" />
-<link rel="stylesheet" type="text/css" href="default.css" />
-';
-
-$CSS_LINES = <<EOT;
-<style type="text/css">
-<!--
-a.summary-letter { text-decoration: none }
-a { color: #2D6198; }
-a:visited { color: #884488; }
-h1 a, h2 a, h3 a { text-decoration: inherit; color: inherit; }
-p { margin-left: 1em; margin-right: 1em; }
-table { margin-left: 2em; }
-pre { margin-left: 2em; }
-#footer { text-align: center; }
-#body { margin-left: 1em; margin-right: 1em; }
-body { background-color: #313131; margin: 0; }
-
-#container {
-    background-color: white;
-    color: #202020;
-    margin-left: 1em;
-    margin-right: 1em;
-}
-
-h1 {
-    background-color: #7BB37B;
-    border: 1px solid #6A996A;
-    color: #151515;
-    font-size: 1.2em;
-    padding-bottom: 0.2em;
-    padding-left: 0.4em;
-    padding-top: 0.2em;
-}
-
-h2 {
-    color: #313131;
-    font-size: 1.2em;
-}
-
-h3 {
-    color: #313131;
-    font-size: 0.8em;
-    margin-bottom: -8px;
-}
-
-.note {
-    margin: 1em;
-    border: 1px solid #bbc9d8;
-    background-color: #dde1e1;
-}
-
-.important {
-    margin: 1em;
-    border: 1px solid #d26767;
-    background-color: #f8e1e1;
-}
-
--->
-</style>
-EOT
-
-my $FFMPEG_NAVBAR = $ENV{"FFMPEG_NAVBAR"} || '';
-
-$AFTER_BODY_OPEN =
-'<div id="container">' .
-"\n$FFMPEG_NAVBAR\n" .
-'<div id="body">';
-
-$PRE_BODY_CLOSE = '</div></div>';
-
-$SMALL_RULE = '';
-$BODYTEXT = '';
-
-$print_page_foot = \&FFmpeg_print_page_foot;
-sub FFmpeg_print_page_foot($$)
-{
-    my $fh = shift;
-    print $fh '<div id="footer">' . "\n";
-    T2H_DEFAULT_print_page_foot($fh);
-    print $fh "</div>\n";
-}
-
-$float = \&FFmpeg_float;
-
-sub FFmpeg_float($$$$)
-{
-    my $text = shift;
-    my $float = shift;
-    my $caption = shift;
-    my $shortcaption = shift;
-
-    my $label = '';
-    if (exists($float->{'id'}))
-    {
-        $label = &$anchor($float->{'id'});
-    }
-    my $class = '';
-    my $subject = '';
-
-    if ($caption =~ /NOTE/)
-    {
-        $class = "note";
-    }
-    elsif ($caption =~ /IMPORTANT/)
-    {
-        $class = "important";
-    }
-
-    return '<div class="float ' . $class . '">' . "$label\n" . $text . '</div>';
-}
-
-$print_page_head = \&FFmpeg_print_page_head;
-sub FFmpeg_print_page_head($$)
-{
-    my $fh = shift;
-    my $longtitle = "$Texi2HTML::THISDOC{'title_no_texi'}";
-    $longtitle .= ": $Texi2HTML::NO_TEXI{'This'}" if exists $Texi2HTML::NO_TEXI{'This'};
-    my $description = $DOCUMENT_DESCRIPTION;
-    $description = $longtitle if (!defined($description));
-    $description = "<meta name=\"description\" content=\"$description\">" if
-         ($description ne '');
-    $description = $Texi2HTML::THISDOC{'documentdescription'} if (defined($Texi2HTML::THISDOC{'documentdescription'}));
-    my $encoding = '';
-    $encoding = "<meta http-equiv=\"Content-Type\" content=\"text/html; charset=$ENCODING\">" if (defined($ENCODING) and ($ENCODING ne ''));
-    $longtitle =~ s/Documentation.*//g;
-    $longtitle = "FFmpeg documentation : " . $longtitle;
-
-    print $fh <<EOT;
-$DOCTYPE
-<html>
-$Texi2HTML::THISDOC{'copying'}<!-- Created on $Texi2HTML::THISDOC{today} by $Texi2HTML::THISDOC{program} -->
-<!--
-$Texi2HTML::THISDOC{program_authors}
--->
-<head>
-<title>$longtitle</title>
-
-$description
-<meta name="keywords" content="$longtitle">
-<meta name="resource-type" content="document">
-<meta name="distribution" content="global">
-<meta name="Generator" content="$Texi2HTML::THISDOC{program}">
-$encoding
-$CSS_LINES
-$EXTRA_HEAD
-</head>
-
-<body $BODYTEXT>
-$AFTER_BODY_OPEN
-EOT
-}
-
-# no navigation elements
-$SECTION_NAVIGATION = 0;
-# the same for texi2html 5.0
-$HEADERS = 0;
-
-# TOC and Chapter headings link
-$TOC_LINKS = 1;
-
-# print the TOC where @contents is used
-$INLINE_CONTENTS = 1;

doc/tablegen.txt

@@ -1,70 +0,0 @@
-Writing a table generator
-
-This documentation is preliminary.
-Parts of the API are not good and should be changed.
-
-Basic concepts
-
-A table generator consists of two files, *_tablegen.c and *_tablegen.h.
-The .h file will provide the variable declarations and initialization
-code for the tables, the .c calls the initialization code and then prints
-the tables as a header file using the tableprint.h helpers.
-Both of these files will be compiled for the host system, so to avoid
-breakage with cross-compilation neither of them may include, directly
-or indirectly, config.h or avconfig.h.
-This means that e.g. libavutil/mathematics.h is ok but libavutil/libm.h is not.
-Due to this, the .c file or Makefile may have to provide additional defines
-or stubs, though if possible this should be avoided.
-In particular, CONFIG_HARDCODED_TABLES should always be defined to 0.
-
-The .c file
-
-This file should include the *_tablegen.h and tableprint.h files and
-anything else it needs as long as it does not depend on config.h or
-avconfig.h.
-In addition to that it must contain a main() function which initializes
-all tables by calling the init functions from the .h file and then prints
-them.
-The printing code typically looks like this:
-    write_fileheader();
-    printf("static const uint8_t my_array[100] = {\n");
-    write_uint8_t_array(my_array, 100);
-    printf("};\n");
-
-This is the more generic form, in case you need to do something special.
-Usually you should instead use the short form:
-    write_fileheader();
-    WRITE_ARRAY("static const", uint8_t, my_array);
-
-write_fileheader() adds some minor things like a "this is a generated file"
-comment and some standard includes.
-tablegen.h defines some write functions for one- and two-dimensional arrays
-for standard types - they print only the "core" parts so they are easier
-to reuse for multi-dimensional arrays so the outermost {} must be printed
-separately.
-If there's no standard function for printing the type you need, the
-WRITE_1D_FUNC_ARGV macro is a very quick way to create one.
-See libavcodec/dv_tablegen.c for an example.
-
-
-The .h file
-
-This file should contain:
- - one or more initialization functions
- - the table variable declarations
-If CONFIG_HARDCODED_TABLES is set, the initialization functions should
-not do anything, and instead of the variable declarations the
-generated *_tables.h file should be included.
-Since that will be generated in the build directory, the path must be
-included, i.e.
-#include "libavcodec/example_tables.h"
-not
-#include "example_tables.h"
-
-Makefile changes
-
-To make the automatic table creation work, you must manually declare the
-new dependency.
-For this add a line similar to this:
-$(SUBDIR)example.o: $(SUBDIR)example_tables.h
-under the "ifdef CONFIG_HARDCODED_TABLES" section in the Makefile.

doc/texi2pod.pl

@@ -26,7 +26,6 @@
 $output = 0;
 $skipping = 0;
 %sects = ();
-@sects_sequence = ();
 $section = "";
 @icstack = ();
 @endwstack = ();
@@ -100,21 +99,15 @@ while(<$inf>) {
         next;
     };
 
-    /^\@include\s+(.+)$/ and do {
-        push @instack, $inf;
-        $inf = gensym();
-
-        # Try cwd and $ibase.
-        open($inf, "<" . $1)
-            or open($inf, "<" . $ibase . "/" . $1)
-                or die "cannot open $1 or $ibase/$1: $!\n";
-        next;
-    };
-
     # Look for blocks surrounded by @c man begin SECTION ... @c man end.
     # This really oughta be @ifman ... @end ifman and the like, but such
     # would require rev'ing all other Texinfo translators.
-    /^\@c\s+man\s+begin\s+([A-Za-z ]+)/ and $sect = $1, push (@sects_sequence, $sect), $output = 1, next;
+    /^\@c\s+man\s+begin\s+([A-Z]+)\s+([A-Za-z0-9-]+)/ and do {
+        $output = 1 if exists $defs{$2};
+        $sect = $1;
+        next;
+    };
+    /^\@c\s+man\s+begin\s+([A-Z]+)/ and $sect = $1, $output = 1, next;
     /^\@c\s+man\s+end/ and do {
         $sects{$sect} = "" unless exists $sects{$sect};
         $sects{$sect} .= postprocess($section);
@@ -231,18 +224,27 @@ while(<$inf>) {
 
     # Single line command handlers.
 
-    /^\@(?:section|unnumbered|unnumberedsec|center|heading)\s+(.+)$/
+    /^\@include\s+(.+)$/ and do {
+        push @instack, $inf;
+        $inf = gensym();
+
+        # Try cwd and $ibase.
+        open($inf, "<" . $1)
+            or open($inf, "<" . $ibase . "/" . $1)
+                or die "cannot open $1 or $ibase/$1: $!\n";
+        next;
+    };
+
+    /^\@(?:section|unnumbered|unnumberedsec|center)\s+(.+)$/
         and $_ = "\n=head2 $1\n";
-    /^\@(?:subsection|subheading)\s+(.+)$/
+    /^\@subsection\s+(.+)$/
         and $_ = "\n=head3 $1\n";
-    /^\@(?:subsubsection|subsubheading)\s+(.+)$/
-        and $_ = "\n=head4 $1\n";
 
     # Block command handlers:
-    /^\@itemize\s*(\@[a-z]+|\*|-)?/ and do {
+    /^\@itemize\s+(\@[a-z]+|\*|-)/ and do {
         push @endwstack, $endw;
         push @icstack, $ic;
-        $ic = $1 ? $1 : "*";
+        $ic = $1;
         $_ = "\n=over 4\n";
         $endw = "itemize";
     };
@@ -301,8 +303,8 @@ die "No filename or title\n" unless defined $fn && defined $tl;
 $sects{NAME} = "$fn \- $tl\n";
 $sects{FOOTNOTES} .= "=back\n" if exists $sects{FOOTNOTES};
 
-unshift @sects_sequence, "NAME";
-for $sect (@sects_sequence) {
+for $sect (qw(NAME SYNOPSIS DESCRIPTION OPTIONS EXAMPLES ENVIRONMENT FILES
+              BUGS NOTES FOOTNOTES SEEALSO AUTHOR COPYRIGHT)) {
     if(exists $sects{$sect}) {
         $head = $sect;
         $head =~ s/SEEALSO/SEE ALSO/;
@@ -348,11 +350,9 @@ sub postprocess
     # @* is also impossible in .pod; we discard it and any newline that
     # follows it.  Similarly, our macro @gol must be discarded.
 
-    s/\@anchor{(?:[^\}]*)\}//g;
     s/\(?\@xref\{(?:[^\}]*)\}(?:[^.<]|(?:<[^<>]*>))*\.\)?//g;
     s/\s+\(\@pxref\{(?:[^\}]*)\}\)//g;
     s/;\s+\@pxref\{(?:[^\}]*)\}//g;
-    s/\@ref\{([^\}]*)\}/$1/g;
     s/\@noindent\s*//g;
     s/\@refill//g;
     s/\@gol//g;

doc/viterbi.txt

@@ -1,110 +0,0 @@
-This is a quick description of the viterbi aka dynamic programing
-algorthm.
-
-Its reason for existence is that wikipedia has become very poor on
-describing algorithms in a way that makes it useable for understanding
-them or anything else actually. It tends now to describe the very same
-algorithm under 50 different names and pages with few understandable
-by even people who fully understand the algorithm and the theory behind.
-
-Problem description: (that is what it can solve)
-assume we have a 2d table, or you could call it a graph or matrix if you
-prefer
-
-    O   O   O   O   O   O   O
-
-    O   O   O   O   O   O   O
-
-    O   O   O   O   O   O   O
-
-    O   O   O   O   O   O   O
-
-
-That table has edges connecting points from each column to the next column
-and each edge has a score like: (only some edge and scores shown to keep it
-readable)
-
-
-    O--5--O-----O-----O-----O-----O
-     2   / 7   / \   / \   / \   /
-      \ /   \ /   \ /   \ /   \ /
-    O7-/--O--/--O--/--O--/--O--/--O
-     \/ \/ 1/ \/ \/ \/ \/ \/ \/ \/
-     /\ /\ 2\ /\ /\ /\ /\ /\ /\ /\
-    O3-/--O--/--O--/--O--/--O--/--O
-      / \   / \   / \   / \   / \
-     1   \ 9   \ /   \ /   \ /   \
-    O--2--O--1--O--5--O--3--O--8--O
-
-
-
-Our goal is to find a path from left to right through it which
-minimizes the sum of the score of all edges.
-(and of course left/right is just a convention here it could be top down too)
-Similarly the minimum could be the maximum by just fliping the sign,
-Example of a path with scores:
-
-    O   O   O   O   O   O   O
-
->---O.  O   O  .O-2-O   O   O
-      5.     .7      .
-    O   O-1-O   O   O 8 O   O
-                       .
-    O   O   O   O   O   O-1-O---> (sum here is 24)
-
-
-The viterbi algorthm now solves this simply column by column
-For the previous column each point has a best path and a associated
-score:
-
-    O-----5     O
-     \
-      \
-    O  \  1     O
-        \/
-        /\
-    O  /  2     O
-      /
-     /
-    O-----2     O
-
-
-To move one column forward we just need to find the best path and associated
-scores for the next column
-here are some edges we could choose from:
-
-
-    O-----5--3--O
-     \      \8
-      \       \
-    O  \  1--9--O
-        \/  \3
-        /\     \
-    O  /  2--1--O
-      /     \2
-     /        \
-    O-----2--4--O
-
-Finding the new best pathes and scores for each point of our new column is
-trivial given we know the previous column best pathes and scores:
-
-    O-----0-----8
-     \
-      \
-    O  \  0----10
-        \/
-        /\
-    O  /  0-----3
-      /     \
-     /        \
-    O     0     4
-
-
-the viterbi algorthm continues exactly like this column for column until the
-end and then just picks the path with the best score (above that would be the
-one with score 3)
-
-
-Author: Michael niedermayer
-Copyright LGPL
-

ffpresets/libvpx-1080p.ffpreset

@@ -1,17 +0,0 @@
-vcodec=libvpx
-g=120
-rc_lookahead=16
-quality=good
-speed=0
-profile=1
-qmax=51
-qmin=11
-slices=4
-vb=2M
-
-#ignored unless using -pass 2
-maxrate=24M
-minrate=100k
-arnr_max_frames=7
-arnr_strength=5
-arnr_type=3

ffpresets/libvpx-1080p50_60.ffpreset

@@ -1,17 +0,0 @@
-vcodec=libvpx
-g=120
-rc_lookahead=25
-quality=good
-speed=0
-profile=1
-qmax=51
-qmin=11
-slices=4
-vb=2M
-
-#ignored unless using -pass 2
-maxrate=24M
-minrate=100k
-arnr_max_frames=7
-arnr_strength=5
-arnr_type=3

ffpresets/libvpx-360p.ffpreset

@@ -1,16 +0,0 @@
-vcodec=libvpx
-g=120
-rc_lookahead=16
-quality=good
-speed=0
-profile=0
-qmax=63
-qmin=0
-vb=768k
-
-#ignored unless using -pass 2
-maxrate=1.5M
-minrate=40k
-arnr_max_frames=7
-arnr_strength=5
-arnr_type=3

ffpresets/libvpx-720p.ffpreset

@@ -1,17 +0,0 @@
-vcodec=libvpx
-g=120
-rc_lookahead=16
-quality=good
-speed=0
-profile=0
-qmax=51
-qmin=11
-slices=4
-vb=2M
-
-#ignored unless using -pass 2
-maxrate=24M
-minrate=100k
-arnr_max_frames=7
-arnr_strength=5
-arnr_type=3

ffpresets/libvpx-720p50_60.ffpreset

@@ -1,17 +0,0 @@
-vcodec=libvpx
-g=120
-rc_lookahead=25
-quality=good
-speed=0
-profile=0
-qmax=51
-qmin=11
-slices=4
-vb=2M
-
-#ignored unless using -pass 2
-maxrate=24M
-minrate=100k
-arnr_max_frames=7
-arnr_strength=5
-arnr_type=3

ffpresets/libx264-baseline.ffpreset

@@ -0,0 +1,4 @@
+coder=0
+bf=0
+flags2=-wpred-dct8x8+mbtree
+wpredp=0

ffpresets/libx264-default.ffpreset

@@ -0,0 +1,22 @@
+coder=1
+flags=+loop
+cmp=+chroma
+partitions=+parti8x8+parti4x4+partp8x8+partb8x8
+me_method=hex
+subq=7
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=1
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+bf=3
+refs=3
+directpred=1
+trellis=1
+flags2=+mixed_refs+wpred+dct8x8+fastpskip+mbtree
+wpredp=2

ffpresets/libx264-fastfirstpass.ffpreset

@@ -0,0 +1,22 @@
+coder=1
+flags=+loop
+cmp=+chroma
+partitions=-parti8x8-parti4x4-partp8x8-partp4x4-partb8x8
+me_method=dia
+subq=2
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=1
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+bf=3
+refs=1
+directpred=3
+trellis=0
+flags2=-bpyramid-wpred-mixed_refs-dct8x8+fastpskip+mbtree
+wpredp=2

ffpresets/libx264-hq.ffpreset

@@ -0,0 +1,22 @@
+coder=1
+flags=+loop
+cmp=+chroma
+partitions=+parti8x8+parti4x4+partp8x8+partb8x8
+me_method=umh
+subq=8
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=2
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+bf=3
+refs=4
+directpred=3
+trellis=1
+flags2=+wpred+mixed_refs+dct8x8+fastpskip+mbtree
+wpredp=2

ffpresets/libx264-ipod320.ffpreset

@@ -0,0 +1,7 @@
+coder=0
+bf=0
+flags2=-wpred-dct8x8+mbtree
+level=13
+maxrate=768000
+bufsize=3000000
+wpredp=0

ffpresets/libx264-ipod640.ffpreset

@@ -0,0 +1,8 @@
+coder=0
+bf=0
+refs=1
+flags2=-wpred-dct8x8+mbtree
+level=30
+maxrate=10000000
+bufsize=10000000
+wpredp=0

ffpresets/libx264-lossless_fast.ffpreset

@@ -0,0 +1,20 @@
+coder=0
+flags=+loop
+cmp=+chroma
+partitions=-parti8x8+parti4x4+partp8x8-partp4x4-partb8x8
+me_method=hex
+subq=3
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=1
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+directpred=1
+flags2=+fastpskip+mbtree
+cqp=0
+wpredp=0

ffpresets/libx264-lossless_max.ffpreset

@@ -0,0 +1,21 @@
+coder=1
+flags=+loop
+cmp=+chroma
+partitions=+parti8x8+parti4x4+partp8x8+partp4x4-partb8x8
+me_method=esa
+subq=8
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=1
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+refs=16
+directpred=1
+flags2=+mixed_refs+dct8x8+fastpskip+mbtree
+cqp=0
+wpredp=2

ffpresets/libx264-lossless_medium.ffpreset

@@ -0,0 +1,20 @@
+coder=1
+flags=+loop
+cmp=+chroma
+partitions=-parti8x8+parti4x4+partp8x8+partp4x4-partb8x8
+me_method=hex
+subq=5
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=1
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+directpred=1
+flags2=+fastpskip+mbtree
+cqp=0
+wpredp=2

ffpresets/libx264-lossless_slow.ffpreset

@@ -0,0 +1,21 @@
+coder=1
+flags=+loop
+cmp=+chroma
+partitions=+parti8x8+parti4x4+partp8x8+partp4x4-partb8x8
+me_method=umh
+subq=6
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=1
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+refs=2
+directpred=1
+flags2=+dct8x8+fastpskip+mbtree
+cqp=0
+wpredp=2

ffpresets/libx264-lossless_slower.ffpreset

@@ -0,0 +1,21 @@
+coder=1
+flags=+loop
+cmp=+chroma
+partitions=+parti8x8+parti4x4+partp8x8+partp4x4-partb8x8
+me_method=umh
+subq=8
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=1
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+refs=4
+directpred=1
+flags2=+mixed_refs+dct8x8+fastpskip+mbtree
+cqp=0
+wpredp=2

ffpresets/libx264-lossless_ultrafast.ffpreset

@@ -0,0 +1,19 @@
+coder=0
+flags=+loop
+cmp=+chroma
+partitions=-parti8x8-parti4x4-partp8x8-partp4x4-partb8x8
+me_method=dia
+subq=0
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=1
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+directpred=1
+flags2=+fastpskip+mbtree
+cqp=0

ffpresets/libx264-main.ffpreset

@@ -0,0 +1 @@
+flags2=-dct8x8+mbtree

ffpresets/libx264-max.ffpreset

@@ -0,0 +1,22 @@
+coder=1
+flags=+loop
+cmp=+chroma
+partitions=+parti8x8+parti4x4+partp8x8+partp4x4+partb8x8
+me_method=tesa
+subq=10
+me_range=24
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=2
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+bf=3
+refs=16
+directpred=3
+trellis=2
+flags2=+wpred+mixed_refs+dct8x8-fastpskip+mbtree
+wpredp=2

ffpresets/libx264-normal.ffpreset

@@ -0,0 +1,22 @@
+coder=1
+flags=+loop
+cmp=+chroma
+partitions=+parti8x8+parti4x4+partp8x8+partb8x8
+me_method=hex
+subq=6
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=1
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+bf=3
+refs=2
+directpred=3
+trellis=0
+flags2=+wpred+dct8x8+fastpskip+mbtree
+wpredp=2

ffpresets/libx264-slowfirstpass.ffpreset

@@ -0,0 +1,22 @@
+coder=1
+flags=+loop
+cmp=+chroma
+partitions=+parti8x8+parti4x4+partp8x8+partb8x8
+me_method=hex
+subq=6
+me_range=16
+g=250
+keyint_min=25
+sc_threshold=40
+i_qfactor=0.71
+b_strategy=2
+qcomp=0.6
+qmin=10
+qmax=51
+qdiff=4
+bf=3
+refs=1
+directpred=3
+trellis=0
+flags2=+wpred+dct8x8+fastpskip+mbtree
+wpredp=2

ffserver.h

@@ -1,6 +1,6 @@
 /*
- * CAF common code
- * Copyright (c) 2007  Justin Ruggles
+ * Multiple format streaming server
+ * copyright (c) 2002 Fabrice Bellard
  *
  * This file is part of FFmpeg.
  *
@@ -18,17 +18,11 @@
  * License along with FFmpeg; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  */
+#ifndef FFMPEG_FFSERVER_H
+#define FFMPEG_FFSERVER_H
 
-/**
- * @file
- * CAF common code
- */
+/* interface between ffserver and modules */
 
-#ifndef AVFORMAT_CAF_H
-#define AVFORMAT_CAF_H
+void ffserver_module_init(void);
 
-#include "internal.h"
-
-extern const AVCodecTag ff_codec_caf_tags[];
-
-#endif /* AVFORMAT_CAF_H */
+#endif /* FFMPEG_FFSERVER_H */

libavcodec/4xm.c

@@ -20,14 +20,14 @@
  */
 
 /**
- * @file
+ * @file libavcodec/4xm.c
  * 4XM codec.
  */
 
 #include "libavutil/intreadwrite.h"
 #include "avcodec.h"
 #include "dsputil.h"
-#include "get_bits.h"
+#include "bitstream.h"
 #include "bytestream.h"
 
 //#undef NDEBUG
@@ -132,13 +132,15 @@ typedef struct FourXContext{
     AVFrame current_picture, last_picture;
     GetBitContext pre_gb;          ///< ac/dc prefix
     GetBitContext gb;
-    GetByteContext g;
-    GetByteContext g2;
+    const uint8_t *bytestream;
+    const uint8_t *bytestream_end;
+    const uint16_t *wordstream;
+    const uint16_t *wordstream_end;
     int mv[256];
     VLC pre_vlc;
     int last_dc;
-    DECLARE_ALIGNED(16, DCTELEM, block)[6][64];
-    void *bitstream_buffer;
+    DECLARE_ALIGNED_8(DCTELEM, block[6][64]);
+    uint8_t *bitstream_buffer;
     unsigned int bitstream_buffer_size;
     int version;
     CFrameBuffer cfrm[CFRAME_BUFFER_COUNT];
@@ -237,15 +239,12 @@ static void idct(DCTELEM block[64]){
 }
 
 static av_cold void init_vlcs(FourXContext *f){
-    static VLC_TYPE table[8][32][2];
     int i;
 
     for(i=0; i<8; i++){
-        block_type_vlc[0][i].table= table[i];
-        block_type_vlc[0][i].table_allocated= 32;
         init_vlc(&block_type_vlc[0][i], BLOCK_TYPE_VLC_BITS, 7,
                  &block_type_tab[0][i][0][1], 2, 1,
-                 &block_type_tab[0][i][0][0], 2, 1, INIT_VLC_USE_NEW_STATIC);
+                 &block_type_tab[0][i][0][0], 2, 1, 1);
     }
 }
 
@@ -260,24 +259,7 @@ static void init_mv(FourXContext *f){
     }
 }
 
-#if HAVE_BIGENDIAN
-#define LE_CENTRIC_MUL(dst, src, scale, dc) \
-    { \
-        unsigned tmpval = AV_RN32(src);                 \
-        tmpval = (tmpval <<  16) | (tmpval >>  16);     \
-        tmpval = tmpval * (scale) + (dc);               \
-        tmpval = (tmpval <<  16) | (tmpval >>  16);     \
-        AV_WN32A(dst, tmpval);                          \
-    }
-#else
-#define LE_CENTRIC_MUL(dst, src, scale, dc) \
-    { \
-        unsigned tmpval = AV_RN32(src) * (scale) + (dc); \
-        AV_WN32A(dst, tmpval);                           \
-    }
-#endif
-
-static inline void mcdc(uint16_t *dst, uint16_t *src, int log2w, int h, int stride, int scale, unsigned dc){
+static inline void mcdc(uint16_t *dst, uint16_t *src, int log2w, int h, int stride, int scale, int dc){
    int i;
    dc*= 0x10001;
 
@@ -291,25 +273,25 @@ static inline void mcdc(uint16_t *dst, uint16_t *src, int log2w, int h, int stri
         break;
     case 1:
         for(i=0; i<h; i++){
-            LE_CENTRIC_MUL(dst, src, scale, dc);
+            ((uint32_t*)dst)[0] = scale*((uint32_t*)src)[0] + dc;
             if(scale) src += stride;
             dst += stride;
         }
         break;
     case 2:
         for(i=0; i<h; i++){
-            LE_CENTRIC_MUL(dst,     src,     scale, dc);
-            LE_CENTRIC_MUL(dst + 2, src + 2, scale, dc);
+            ((uint32_t*)dst)[0] = scale*((uint32_t*)src)[0] + dc;
+            ((uint32_t*)dst)[1] = scale*((uint32_t*)src)[1] + dc;
             if(scale) src += stride;
             dst += stride;
         }
         break;
     case 3:
         for(i=0; i<h; i++){
-            LE_CENTRIC_MUL(dst,     src,     scale, dc);
-            LE_CENTRIC_MUL(dst + 2, src + 2, scale, dc);
-            LE_CENTRIC_MUL(dst + 4, src + 4, scale, dc);
-            LE_CENTRIC_MUL(dst + 6, src + 6, scale, dc);
+            ((uint32_t*)dst)[0] = scale*((uint32_t*)src)[0] + dc;
+            ((uint32_t*)dst)[1] = scale*((uint32_t*)src)[1] + dc;
+            ((uint32_t*)dst)[2] = scale*((uint32_t*)src)[2] + dc;
+            ((uint32_t*)dst)[3] = scale*((uint32_t*)src)[3] + dc;
             if(scale) src += stride;
             dst += stride;
         }
@@ -328,11 +310,9 @@ static void decode_p_block(FourXContext *f, uint16_t *dst, uint16_t *src, int lo
     assert(code>=0 && code<=6);
 
     if(code == 0){
-        if (f->g.buffer_end - f->g.buffer < 1){
-            av_log(f->avctx, AV_LOG_ERROR, "bytestream overread\n");
+        if (f->bytestream_end - f->bytestream < 1)
             return;
-        }
-        src += f->mv[ *f->g.buffer++ ];
+        src += f->mv[ *f->bytestream++ ];
         if(start > src || src > end){
             av_log(f->avctx, AV_LOG_ERROR, "mv out of pic\n");
             return;
@@ -349,37 +329,29 @@ static void decode_p_block(FourXContext *f, uint16_t *dst, uint16_t *src, int lo
     }else if(code == 3 && f->version<2){
         mcdc(dst, src, log2w, h, stride, 1, 0);
     }else if(code == 4){
-        if (f->g.buffer_end - f->g.buffer < 1){
-            av_log(f->avctx, AV_LOG_ERROR, "bytestream overread\n");
+        if (f->bytestream_end - f->bytestream < 1)
             return;
-        }
-        src += f->mv[ *f->g.buffer++ ];
+        src += f->mv[ *f->bytestream++ ];
         if(start > src || src > end){
             av_log(f->avctx, AV_LOG_ERROR, "mv out of pic\n");
             return;
         }
-        if (f->g2.buffer_end - f->g2.buffer < 1){
-            av_log(f->avctx, AV_LOG_ERROR, "wordstream overread\n");
+        if (f->wordstream_end - f->wordstream < 1)
             return;
-        }
-        mcdc(dst, src, log2w, h, stride, 1, bytestream2_get_le16(&f->g2));
+        mcdc(dst, src, log2w, h, stride, 1, le2me_16(*f->wordstream++));
     }else if(code == 5){
-        if (f->g2.buffer_end - f->g2.buffer < 1){
-            av_log(f->avctx, AV_LOG_ERROR, "wordstream overread\n");
+        if (f->wordstream_end - f->wordstream < 1)
             return;
-        }
-        mcdc(dst, src, log2w, h, stride, 0, bytestream2_get_le16(&f->g2));
+        mcdc(dst, src, log2w, h, stride, 0, le2me_16(*f->wordstream++));
     }else if(code == 6){
-        if (f->g2.buffer_end - f->g2.buffer < 2){
-            av_log(f->avctx, AV_LOG_ERROR, "wordstream overread\n");
+        if (f->wordstream_end - f->wordstream < 2)
             return;
-        }
         if(log2w){
-            dst[0] = bytestream2_get_le16(&f->g2);
-            dst[1] = bytestream2_get_le16(&f->g2);
+            dst[0] = le2me_16(*f->wordstream++);
+            dst[1] = le2me_16(*f->wordstream++);
         }else{
-            dst[0     ] = bytestream2_get_le16(&f->g2);
-            dst[stride] = bytestream2_get_le16(&f->g2);
+            dst[0     ] = le2me_16(*f->wordstream++);
+            dst[stride] = le2me_16(*f->wordstream++);
         }
     }
 }
@@ -391,7 +363,7 @@ static int decode_p_frame(FourXContext *f, const uint8_t *buf, int length){
     uint16_t *src= (uint16_t*)f->last_picture.data[0];
     uint16_t *dst= (uint16_t*)f->current_picture.data[0];
     const int stride= f->current_picture.linesize[0]>>1;
-    unsigned int bitstream_size, bytestream_size, wordstream_size, extra, bytestream_offset, wordstream_offset;
+    unsigned int bitstream_size, bytestream_size, wordstream_size, extra;
 
     if(f->version>1){
         extra=20;
@@ -416,17 +388,14 @@ static int decode_p_frame(FourXContext *f, const uint8_t *buf, int length){
         return -1;
     }
 
-    av_fast_malloc(&f->bitstream_buffer, &f->bitstream_buffer_size, bitstream_size + FF_INPUT_BUFFER_PADDING_SIZE);
-    if (!f->bitstream_buffer)
-        return AVERROR(ENOMEM);
-    f->dsp.bswap_buf(f->bitstream_buffer, (const uint32_t*)(buf + extra), bitstream_size/4);
-    memset((uint8_t*)f->bitstream_buffer + bitstream_size, 0, FF_INPUT_BUFFER_PADDING_SIZE);
+    f->bitstream_buffer= av_fast_realloc(f->bitstream_buffer, &f->bitstream_buffer_size, bitstream_size + FF_INPUT_BUFFER_PADDING_SIZE);
+    f->dsp.bswap_buf((uint32_t*)f->bitstream_buffer, (const uint32_t*)(buf + extra), bitstream_size/4);
     init_get_bits(&f->gb, f->bitstream_buffer, 8*bitstream_size);
 
-    wordstream_offset = extra + bitstream_size;
-    bytestream_offset = extra + bitstream_size + wordstream_size;
-    bytestream2_init(&f->g2, buf + wordstream_offset, length - wordstream_offset);
-    bytestream2_init(&f->g,  buf + bytestream_offset, length - bytestream_offset);
+    f->wordstream= (const uint16_t*)(buf + extra + bitstream_size);
+    f->wordstream_end= f->wordstream + wordstream_size/2;
+    f->bytestream= buf + extra + bitstream_size + wordstream_size;
+    f->bytestream_end = f->bytestream + bytestream_size;
 
     init_mv(f);
 
@@ -438,6 +407,15 @@ static int decode_p_frame(FourXContext *f, const uint8_t *buf, int length){
         dst += 8*stride;
     }
 
+    if(   bitstream_size != (get_bits_count(&f->gb)+31)/32*4
+       || (((const char*)f->wordstream - (const char*)buf + 2)&~2) != extra + bitstream_size + wordstream_size
+       || (((const char*)f->bytestream - (const char*)buf + 3)&~3) != extra + bitstream_size + wordstream_size + bytestream_size)
+        av_log(f->avctx, AV_LOG_ERROR, " %d %td %td bytes left\n",
+            bitstream_size - (get_bits_count(&f->gb)+31)/32*4,
+            -(((const char*)f->bytestream - (const char*)buf + 3)&~3) + (extra + bitstream_size + wordstream_size + bytestream_size),
+            -(((const char*)f->wordstream - (const char*)buf + 2)&~2) + (extra + bitstream_size + wordstream_size)
+        );
+
     return 0;
 }
 
@@ -448,11 +426,6 @@ static int decode_p_frame(FourXContext *f, const uint8_t *buf, int length){
 static int decode_i_block(FourXContext *f, DCTELEM *block){
     int code, i, j, level, val;
 
-    if(get_bits_left(&f->gb) < 2){
-        av_log(f->avctx, AV_LOG_ERROR, "%d bits left before decode_i_block()\n", get_bits_left(&f->gb));
-        return -1;
-    }
-
     /* DC coef */
     val = get_vlc2(&f->pre_gb, f->pre_vlc.table, ACDC_VLC_BITS, 3);
     if (val>>4){
@@ -624,10 +597,9 @@ static const uint8_t *read_huffman_tables(FourXContext *f, const uint8_t * const
         len_tab[j]= len;
     }
 
-    if (init_vlc(&f->pre_vlc, ACDC_VLC_BITS, 257,
-                 len_tab , 1, 1,
-                 bits_tab, 4, 4, 0))
-        return NULL;
+    init_vlc(&f->pre_vlc, ACDC_VLC_BITS, 257,
+             len_tab , 1, 1,
+             bits_tab, 4, 4, 0);
 
     return ptr;
 }
@@ -643,17 +615,9 @@ static int decode_i2_frame(FourXContext *f, const uint8_t *buf, int length){
     int x, y, x2, y2;
     const int width= f->avctx->width;
     const int height= f->avctx->height;
-    const int mbs = (FFALIGN(width, 16) >> 4) * (FFALIGN(height, 16) >> 4);
     uint16_t *dst= (uint16_t*)f->current_picture.data[0];
     const int stride= f->current_picture.linesize[0]>>1;
     const uint8_t *buf_end = buf + length;
-    GetByteContext g3;
-
-    if(length < mbs * 8) {
-        av_log(f->avctx, AV_LOG_ERROR, "packet size too small\n");
-        return AVERROR_INVALIDDATA;
-    }
-    bytestream2_init(&g3, buf, length);
 
     for(y=0; y<height; y+=16){
         for(x=0; x<width; x+=16){
@@ -662,8 +626,8 @@ static int decode_i2_frame(FourXContext *f, const uint8_t *buf, int length){
                 return -1;
             memset(color, 0, sizeof(color));
 //warning following is purely guessed ...
-            color[0]= bytestream2_get_le16u(&g3);
-            color[1]= bytestream2_get_le16u(&g3);
+            color[0]= bytestream_get_le16(&buf);
+            color[1]= bytestream_get_le16(&buf);
 
             if(color[0]&0x8000) av_log(NULL, AV_LOG_ERROR, "unk bit 1\n");
             if(color[1]&0x8000) av_log(NULL, AV_LOG_ERROR, "unk bit 2\n");
@@ -671,7 +635,7 @@ static int decode_i2_frame(FourXContext *f, const uint8_t *buf, int length){
             color[2]= mix(color[0], color[1]);
             color[3]= mix(color[1], color[0]);
 
-            bits= bytestream2_get_le32u(&g3);
+            bits= bytestream_get_le32(&buf);
             for(y2=0; y2<16; y2++){
                 for(x2=0; x2<16; x2++){
                     int index= 2*(x2>>2) + 8*(y2>>2);
@@ -680,7 +644,7 @@ static int decode_i2_frame(FourXContext *f, const uint8_t *buf, int length){
             }
             dst+=16;
         }
-        dst += 16 * stride - x;
+        dst += 16*stride - width;
     }
 
     return 0;
@@ -690,17 +654,16 @@ static int decode_i_frame(FourXContext *f, const uint8_t *buf, int length){
     int x, y;
     const int width= f->avctx->width;
     const int height= f->avctx->height;
+    uint16_t *dst= (uint16_t*)f->current_picture.data[0];
+    const int stride= f->current_picture.linesize[0]>>1;
     const unsigned int bitstream_size= AV_RL32(buf);
     unsigned int prestream_size;
     const uint8_t *prestream;
 
-    if (bitstream_size > (1<<26) || length < bitstream_size + 12) {
-        av_log(f->avctx, AV_LOG_ERROR, "packet size too small\n");
-        return AVERROR_INVALIDDATA;
-    }
-
-    prestream_size = 4 * AV_RL32(buf + bitstream_size + 4);
-    prestream      = buf + bitstream_size + 12;
+    if (bitstream_size > (1<<26) || length < bitstream_size + 12)
+        return -1;
+    prestream_size = 4*AV_RL32(buf + bitstream_size + 4);
+    prestream = buf + bitstream_size + 12;
 
     if (prestream_size > (1<<26) ||
         prestream_size != length - (bitstream_size + 12)){
@@ -716,11 +679,8 @@ static int decode_i_frame(FourXContext *f, const uint8_t *buf, int length){
 
     prestream_size= length + buf - prestream;
 
-    av_fast_malloc(&f->bitstream_buffer, &f->bitstream_buffer_size, prestream_size + FF_INPUT_BUFFER_PADDING_SIZE);
-    if (!f->bitstream_buffer)
-        return AVERROR(ENOMEM);
-    f->dsp.bswap_buf(f->bitstream_buffer, (const uint32_t*)prestream, prestream_size/4);
-    memset((uint8_t*)f->bitstream_buffer + prestream_size, 0, FF_INPUT_BUFFER_PADDING_SIZE);
+    f->bitstream_buffer= av_fast_realloc(f->bitstream_buffer, &f->bitstream_buffer_size, prestream_size + FF_INPUT_BUFFER_PADDING_SIZE);
+    f->dsp.bswap_buf((uint32_t*)f->bitstream_buffer, (const uint32_t*)prestream, prestream_size/4);
     init_get_bits(&f->pre_gb, f->bitstream_buffer, 8*prestream_size);
 
     f->last_dc= 0*128*8*8;
@@ -732,6 +692,7 @@ static int decode_i_frame(FourXContext *f, const uint8_t *buf, int length){
 
             idct_put(f, x, y);
         }
+        dst += 16*stride;
     }
 
     if(get_vlc2(&f->pre_gb, f->pre_vlc.table, ACDC_VLC_BITS, 3) != 256)
@@ -742,10 +703,8 @@ static int decode_i_frame(FourXContext *f, const uint8_t *buf, int length){
 
 static int decode_frame(AVCodecContext *avctx,
                         void *data, int *data_size,
-                        AVPacket *avpkt)
+                        const uint8_t *buf, int buf_size)
 {
-    const uint8_t *buf = avpkt->data;
-    int buf_size = avpkt->size;
     FourXContext * const f = avctx->priv_data;
     AVFrame *picture = data;
     AVFrame *p, temp;
@@ -765,10 +724,8 @@ static int decode_frame(AVCodecContext *avctx,
         const int whole_size= AV_RL32(buf+16);
         CFrameBuffer *cfrm;
 
-        if (data_size < 0 || whole_size < 0){
-            av_log(f->avctx, AV_LOG_ERROR, "sizes invalid\n");
+        if (data_size < 0 || whole_size < 0)
             return AVERROR_INVALIDDATA;
-        }
 
         for(i=0; i<CFRAME_BUFFER_COUNT; i++){
             if(f->cfrm[i].id && f->cfrm[i].id < avctx->frame_number)
@@ -823,45 +780,34 @@ static int decode_frame(AVCodecContext *avctx,
 
     avctx->flags |= CODEC_FLAG_EMU_EDGE; // alternatively we would have to use our own buffer management
 
-    p->reference= 3;
-    if (avctx->reget_buffer(avctx, p) < 0) {
-        av_log(avctx, AV_LOG_ERROR, "reget_buffer() failed\n");
+    if(p->data[0])
+        avctx->release_buffer(avctx, p);
+
+    p->reference= 1;
+    if(avctx->get_buffer(avctx, p) < 0){
+        av_log(avctx, AV_LOG_ERROR, "get_buffer() failed\n");
         return -1;
     }
 
     if(frame_4cc == AV_RL32("ifr2")){
-        p->pict_type= AV_PICTURE_TYPE_I;
-        if(decode_i2_frame(f, buf-4, frame_size + 4) < 0) {
-            av_log(f->avctx, AV_LOG_ERROR, "decode i2 frame failed\n");
+        p->pict_type= FF_I_TYPE;
+        if(decode_i2_frame(f, buf-4, frame_size) < 0)
             return -1;
-        }
     }else if(frame_4cc == AV_RL32("ifrm")){
-        p->pict_type= AV_PICTURE_TYPE_I;
-        if(decode_i_frame(f, buf, frame_size) < 0){
-            av_log(f->avctx, AV_LOG_ERROR, "decode i frame failed\n");
+        p->pict_type= FF_I_TYPE;
+        if(decode_i_frame(f, buf, frame_size) < 0)
             return -1;
-        }
     }else if(frame_4cc == AV_RL32("pfrm") || frame_4cc == AV_RL32("pfr2")){
-        if(!f->last_picture.data[0]){
-            f->last_picture.reference= 3;
-            if(avctx->get_buffer(avctx, &f->last_picture) < 0){
-                av_log(avctx, AV_LOG_ERROR, "get_buffer() failed\n");
-                return -1;
-            }
-        }
-
-        p->pict_type= AV_PICTURE_TYPE_P;
-        if(decode_p_frame(f, buf, frame_size) < 0){
-            av_log(f->avctx, AV_LOG_ERROR, "decode p frame failed\n");
+        p->pict_type= FF_P_TYPE;
+        if(decode_p_frame(f, buf, frame_size) < 0)
             return -1;
-        }
     }else if(frame_4cc == AV_RL32("snd_")){
         av_log(avctx, AV_LOG_ERROR, "ignoring snd_ chunk length:%d\n", buf_size);
     }else{
         av_log(avctx, AV_LOG_ERROR, "ignoring unknown chunk length:%d\n", buf_size);
     }
 
-    p->key_frame= p->pict_type == AV_PICTURE_TYPE_I;
+    p->key_frame= p->pict_type == FF_I_TYPE;
 
     *picture= *p;
     *data_size = sizeof(AVPicture);
@@ -887,19 +833,13 @@ static av_cold int decode_init(AVCodecContext *avctx){
         av_log(avctx, AV_LOG_ERROR, "extradata wrong or missing\n");
         return 1;
     }
-    if((avctx->width % 16) || (avctx->height % 16)) {
-        av_log(avctx, AV_LOG_ERROR, "unsupported width/height\n");
-        return AVERROR_INVALIDDATA;
-    }
 
-    avcodec_get_frame_defaults(&f->current_picture);
-    avcodec_get_frame_defaults(&f->last_picture);
     f->version= AV_RL32(avctx->extradata)>>16;
     common_init(avctx);
     init_vlcs(f);
 
     if(f->version>2) avctx->pix_fmt= PIX_FMT_RGB565;
-    else             avctx->pix_fmt= PIX_FMT_BGR555;
+    else             avctx->pix_fmt= PIX_FMT_RGB555;
 
     return 0;
 }
@@ -916,23 +856,20 @@ static av_cold int decode_end(AVCodecContext *avctx){
         f->cfrm[i].allocated_size= 0;
     }
     free_vlc(&f->pre_vlc);
-    if(f->current_picture.data[0])
-        avctx->release_buffer(avctx, &f->current_picture);
-    if(f->last_picture.data[0])
-        avctx->release_buffer(avctx, &f->last_picture);
 
     return 0;
 }
 
-AVCodec ff_fourxm_decoder = {
-    .name           = "4xm",
-    .type           = AVMEDIA_TYPE_VIDEO,
-    .id             = CODEC_ID_4XM,
-    .priv_data_size = sizeof(FourXContext),
-    .init           = decode_init,
-    .close          = decode_end,
-    .decode         = decode_frame,
-    .capabilities   = CODEC_CAP_DR1,
+AVCodec fourxm_decoder = {
+    "4xm",
+    CODEC_TYPE_VIDEO,
+    CODEC_ID_4XM,
+    sizeof(FourXContext),
+    decode_init,
+    NULL,
+    decode_end,
+    decode_frame,
+    /*CODEC_CAP_DR1,*/
     .long_name = NULL_IF_CONFIG_SMALL("4X Movie"),
 };
 

libavcodec/8bps.c

@@ -20,14 +20,14 @@
  */
 
 /**
- * @file
+ * @file libavcodec/8bps.c
  * QT 8BPS Video Decoder by Roberto Togni
  * For more information about the 8BPS format, visit:
  *   http://www.pcisys.net/~melanson/codecs/
  *
  * Supports: PAL8 (RGB 8bpp, paletted)
  *         : BGR24 (RGB 24bpp) (can also output it as RGB32)
- *         : RGB32 (RGB 32bpp, 4th plane is alpha)
+ *         : RGB32 (RGB 32bpp, 4th plane is probably alpha and it's ignored)
  *
  */
 
@@ -50,8 +50,6 @@ typedef struct EightBpsContext {
 
         unsigned char planes;
         unsigned char planemap[4];
-
-        uint32_t pal[256];
 } EightBpsContext;
 
 
@@ -60,10 +58,8 @@ typedef struct EightBpsContext {
  * Decode a frame
  *
  */
-static int decode_frame(AVCodecContext *avctx, void *data, int *data_size, AVPacket *avpkt)
+static int decode_frame(AVCodecContext *avctx, void *data, int *data_size, const uint8_t *buf, int buf_size)
 {
-        const uint8_t *buf = avpkt->data;
-        int buf_size = avpkt->size;
         EightBpsContext * const c = avctx->priv_data;
         const unsigned char *encoded = buf;
         unsigned char *pixptr, *pixptr_end;
@@ -71,6 +67,7 @@ static int decode_frame(AVCodecContext *avctx, void *data, int *data_size, AVPac
         unsigned int dlen, p, row;
         const unsigned char *lp, *dp;
         unsigned char count;
+        unsigned int px_inc;
         unsigned int planes = c->planes;
         unsigned char *planemap = c->planemap;
 
@@ -87,6 +84,12 @@ static int decode_frame(AVCodecContext *avctx, void *data, int *data_size, AVPac
         /* Set data pointer after line lengths */
         dp = encoded + planes * (height << 1);
 
+        /* Ignore alpha plane, don't know what to do with it */
+        if (planes == 4)
+                planes--;
+
+        px_inc = planes + (avctx->pix_fmt == PIX_FMT_RGB32);
+
         for (p = 0; p < planes; p++) {
                 /* Lines length pointer for this plane */
                 lp = encoded + p * (height << 1);
@@ -95,27 +98,27 @@ static int decode_frame(AVCodecContext *avctx, void *data, int *data_size, AVPac
                 for(row = 0; row < height; row++) {
                         pixptr = c->pic.data[0] + row * c->pic.linesize[0] + planemap[p];
                         pixptr_end = pixptr + c->pic.linesize[0];
-                        dlen = av_be2ne16(*(const unsigned short *)(lp+row*2));
+                        dlen = be2me_16(*(const unsigned short *)(lp+row*2));
                         /* Decode a row of this plane */
                         while(dlen > 0) {
                                 if(dp + 1 >= buf+buf_size) return -1;
                                 if ((count = *dp++) <= 127) {
                                         count++;
                                         dlen -= count + 1;
-                                        if (pixptr + count * planes > pixptr_end)
+                                        if (pixptr + count * px_inc > pixptr_end)
                                             break;
                                         if(dp + count > buf+buf_size) return -1;
                                         while(count--) {
                                                 *pixptr = *dp++;
-                                                pixptr += planes;
+                                                pixptr += px_inc;
                                         }
                                 } else {
                                         count = 257 - count;
-                                        if (pixptr + count * planes > pixptr_end)
+                                        if (pixptr + count * px_inc > pixptr_end)
                                             break;
                                         while(count--) {
                                                 *pixptr = *dp;
-                                                pixptr += planes;
+                                                pixptr += px_inc;
                                         }
                                         dp++;
                                         dlen -= 2;
@@ -124,16 +127,13 @@ static int decode_frame(AVCodecContext *avctx, void *data, int *data_size, AVPac
                 }
         }
 
-        if (avctx->bits_per_coded_sample <= 8) {
-                const uint8_t *pal = av_packet_get_side_data(avpkt,
-                                                             AV_PKT_DATA_PALETTE,
-                                                             NULL);
-                if (pal) {
+        if (avctx->palctrl) {
+                memcpy (c->pic.data[1], avctx->palctrl->palette, AVPALETTE_SIZE);
+                if (avctx->palctrl->palette_changed) {
                         c->pic.palette_has_changed = 1;
-                        memcpy(c->pal, pal, AVPALETTE_SIZE);
-                }
-
-                memcpy (c->pic.data[1], c->pal, AVPALETTE_SIZE);
+                        avctx->palctrl->palette_changed = 0;
+                } else
+                        c->pic.palette_has_changed = 0;
         }
 
         *data_size = sizeof(AVFrame);
@@ -155,14 +155,21 @@ static av_cold int decode_init(AVCodecContext *avctx)
 
         c->avctx = avctx;
 
-        avcodec_get_frame_defaults(&c->pic);
         c->pic.data[0] = NULL;
 
+    if (avcodec_check_dimensions(avctx, avctx->width, avctx->height) < 0) {
+        return 1;
+    }
+
         switch (avctx->bits_per_coded_sample) {
                 case 8:
                         avctx->pix_fmt = PIX_FMT_PAL8;
                         c->planes = 1;
                         c->planemap[0] = 0; // 1st plane is palette indexes
+                        if (avctx->palctrl == NULL) {
+                                av_log(avctx, AV_LOG_ERROR, "Error: PAL8 format but no palette from demuxer.\n");
+                                return -1;
+                        }
                         break;
                 case 24:
                         avctx->pix_fmt = avctx->get_format(avctx, pixfmt_rgb24);
@@ -174,16 +181,16 @@ static av_cold int decode_init(AVCodecContext *avctx)
                 case 32:
                         avctx->pix_fmt = PIX_FMT_RGB32;
                         c->planes = 4;
-#if HAVE_BIGENDIAN
+#ifdef WORDS_BIGENDIAN
                         c->planemap[0] = 1; // 1st plane is red
                         c->planemap[1] = 2; // 2nd plane is green
                         c->planemap[2] = 3; // 3rd plane is blue
-                        c->planemap[3] = 0; // 4th plane is alpha
+                        c->planemap[3] = 0; // 4th plane is alpha???
 #else
                         c->planemap[0] = 2; // 1st plane is red
                         c->planemap[1] = 1; // 2nd plane is green
                         c->planemap[2] = 0; // 3rd plane is blue
-                        c->planemap[3] = 3; // 4th plane is alpha
+                        c->planemap[3] = 3; // 4th plane is alpha???
 #endif
                         break;
                 default:
@@ -214,14 +221,15 @@ static av_cold int decode_end(AVCodecContext *avctx)
 
 
 
-AVCodec ff_eightbps_decoder = {
-    .name           = "8bps",
-    .type           = AVMEDIA_TYPE_VIDEO,
-    .id             = CODEC_ID_8BPS,
-    .priv_data_size = sizeof(EightBpsContext),
-    .init           = decode_init,
-    .close          = decode_end,
-    .decode         = decode_frame,
-    .capabilities   = CODEC_CAP_DR1,
-    .long_name      = NULL_IF_CONFIG_SMALL("QuickTime 8BPS video"),
+AVCodec eightbps_decoder = {
+        "8bps",
+        CODEC_TYPE_VIDEO,
+        CODEC_ID_8BPS,
+        sizeof(EightBpsContext),
+        decode_init,
+        NULL,
+        decode_end,
+        decode_frame,
+        CODEC_CAP_DR1,
+        .long_name = NULL_IF_CONFIG_SMALL("QuickTime 8BPS video"),
 };

libavcodec/8svx.c

@@ -1,6 +1,6 @@
 /*
+ * 8SVX audio decoder
  * Copyright (C) 2008 Jaikrishnan Menon
- * Copyright (C) 2011 Stefano Sabatini
  *
  * This file is part of FFmpeg.
  *
@@ -20,226 +20,92 @@
  */
 
 /**
- * @file
+ * @file libavcodec/8svx.c
  * 8svx audio decoder
  * @author Jaikrishnan Menon
- *
  * supports: fibonacci delta encoding
  *         : exponential encoding
- *
- * For more information about the 8SVX format:
- * http://netghost.narod.ru/gff/vendspec/iff/iff.txt
- * http://sox.sourceforge.net/AudioFormats-11.html
- * http://aminet.net/package/mus/misc/wavepak
- * http://amigan.1emu.net/reg/8SVX.txt
- *
- * Samples can be found here:
- * http://aminet.net/mods/smpl/
  */
 
 #include "avcodec.h"
 
 /** decoder context */
 typedef struct EightSvxContext {
-    AVFrame frame;
-    const int8_t *table;
-
-    /* buffer used to store the whole audio decoded/interleaved chunk,
-     * which is sent with the first packet */
-    uint8_t *samples;
-    size_t samples_size;
-    int samples_idx;
+    int16_t fib_acc;
+    const int16_t *table;
 } EightSvxContext;
 
-static const int8_t fibonacci[16]   = { -34,  -21, -13,  -8, -5, -3, -2, -1, 0, 1, 2, 3, 5, 8,  13, 21 };
-static const int8_t exponential[16] = { -128, -64, -32, -16, -8, -4, -2, -1, 0, 1, 2, 4, 8, 16, 32, 64 };
-
-#define MAX_FRAME_SIZE 2048
-
-/**
- * Interleave samples in buffer containing all left channel samples
- * at the beginning, and right channel samples at the end.
- * Each sample is assumed to be in signed 8-bit format.
- *
- * @param size the size in bytes of the dst and src buffer
- */
-static void interleave_stereo(uint8_t *dst, const uint8_t *src, int size)
-{
-    uint8_t *dst_end = dst + size;
-    size = size>>1;
-
-    while (dst < dst_end) {
-        *dst++ = *src;
-        *dst++ = *(src+size);
-        src++;
-    }
-}
-
-/**
- * Delta decode the compressed values in src, and put the resulting
- * decoded n samples in dst.
- *
- * @param val starting value assumed by the delta sequence
- * @param table delta sequence table
- * @return size in bytes of the decoded data, must be src_size*2
- */
-static int delta_decode(int8_t *dst, const uint8_t *src, int src_size,
-                        int8_t val, const int8_t *table)
-{
-    int n = src_size;
-    int8_t *dst0 = dst;
-
-    while (n--) {
-        uint8_t d = *src++;
-        val = av_clip(val + table[d & 0x0f], -127, 128);
-        *dst++ = val;
-        val = av_clip(val + table[d >> 4]  , -127, 128);
-        *dst++ = val;
-    }
-
-    return dst-dst0;
-}
+static const int16_t fibonacci[16]   = { -34<<8, -21<<8, -13<<8,  -8<<8, -5<<8, -3<<8, -2<<8, -1<<8,
+                                          0, 1<<8, 2<<8, 3<<8, 5<<8, 8<<8, 13<<8, 21<<8 };
+static const int16_t exponential[16] = { -128<<8, -64<<8, -32<<8, -16<<8, -8<<8, -4<<8, -2<<8, -1<<8,
+                                          0, 1<<8, 2<<8, 4<<8, 8<<8, 16<<8, 32<<8, 64<<8 };
 
 /** decode a frame */
-static int eightsvx_decode_frame(AVCodecContext *avctx, void *data,
-                                 int *got_frame_ptr, AVPacket *avpkt)
+static int eightsvx_decode_frame(AVCodecContext *avctx, void *data, int *data_size,
+                                 const uint8_t *buf, int buf_size)
 {
     EightSvxContext *esc = avctx->priv_data;
-    int n, out_data_size, ret;
-    uint8_t *src, *dst;
+    int16_t *out_data = data;
+    int consumed = buf_size;
+    const uint8_t *buf_end = buf + buf_size;
 
-    /* decode and interleave the first packet */
-    if (!esc->samples && avpkt) {
-        uint8_t *deinterleaved_samples, *p = NULL;
+    if((*data_size >> 2) < buf_size)
+        return -1;
 
-        esc->samples_size = avctx->codec->id == CODEC_ID_8SVX_RAW || avctx->codec->id ==CODEC_ID_PCM_S8_PLANAR?
-            avpkt->size : avctx->channels + (avpkt->size-avctx->channels) * 2;
-        if (!(esc->samples = av_malloc(esc->samples_size)))
-            return AVERROR(ENOMEM);
-
-        /* decompress */
-        if (avctx->codec->id == CODEC_ID_8SVX_FIB || avctx->codec->id == CODEC_ID_8SVX_EXP) {
-            const uint8_t *buf = avpkt->data;
-            int buf_size = avpkt->size;
-            int n = esc->samples_size;
-
-            if (buf_size < 2) {
-                av_log(avctx, AV_LOG_ERROR, "packet size is too small\n");
-                return AVERROR(EINVAL);
-            }
-            if (!(deinterleaved_samples = av_mallocz(n)))
-                return AVERROR(ENOMEM);
-            p = deinterleaved_samples;
-
-            /* the uncompressed starting value is contained in the first byte */
-            if (avctx->channels == 2) {
-                delta_decode(deinterleaved_samples      , buf+1, buf_size/2-1, buf[0], esc->table);
-                buf += buf_size/2;
-                delta_decode(deinterleaved_samples+n/2-1, buf+1, buf_size/2-1, buf[0], esc->table);
-            } else
-                delta_decode(deinterleaved_samples      , buf+1, buf_size-1  , buf[0], esc->table);
-        } else {
-            deinterleaved_samples = avpkt->data;
-        }
-
-        if (avctx->channels == 2)
-            interleave_stereo(esc->samples, deinterleaved_samples, esc->samples_size);
-        else
-            memcpy(esc->samples, deinterleaved_samples, esc->samples_size);
-        av_freep(&p);
+    if(avctx->frame_number == 0) {
+        esc->fib_acc = buf[1] << 8;
+        buf_size -= 2;
+        buf += 2;
     }
 
-    /* get output buffer */
-    esc->frame.nb_samples = (FFMIN(MAX_FRAME_SIZE, esc->samples_size - esc->samples_idx) +avctx->channels-1)  / avctx->channels;
-    if ((ret = avctx->get_buffer(avctx, &esc->frame)) < 0) {
-        av_log(avctx, AV_LOG_ERROR, "get_buffer() failed\n");
-        return ret;
+    *data_size = buf_size << 2;
+
+    while(buf < buf_end) {
+        uint8_t d = *buf++;
+        esc->fib_acc += esc->table[d & 0x0f];
+        *out_data++ = esc->fib_acc;
+        esc->fib_acc += esc->table[d >> 4];
+        *out_data++ = esc->fib_acc;
     }
 
-    *got_frame_ptr   = 1;
-    *(AVFrame *)data = esc->frame;
-
-    dst = esc->frame.data[0];
-    src = esc->samples + esc->samples_idx;
-    out_data_size = esc->frame.nb_samples * avctx->channels;
-    for (n = out_data_size; n > 0; n--)
-        *dst++ = *src++ + 128;
-    esc->samples_idx += out_data_size;
-
-    return avctx->codec->id == CODEC_ID_8SVX_FIB || avctx->codec->id == CODEC_ID_8SVX_EXP ?
-        (avctx->frame_number == 0)*2 + out_data_size / 2 :
-        out_data_size;
+    return consumed;
 }
 
+/** initialize 8svx decoder */
 static av_cold int eightsvx_decode_init(AVCodecContext *avctx)
 {
     EightSvxContext *esc = avctx->priv_data;
 
-    if (avctx->channels < 1 || avctx->channels > 2) {
-        av_log(avctx, AV_LOG_ERROR, "8SVX does not support more than 2 channels\n");
-        return AVERROR_INVALIDDATA;
+    switch(avctx->codec->id) {
+        case CODEC_ID_8SVX_FIB:
+          esc->table = fibonacci;
+          break;
+        case CODEC_ID_8SVX_EXP:
+          esc->table = exponential;
+          break;
+        default:
+          return -1;
     }
-
-    switch (avctx->codec->id) {
-    case CODEC_ID_8SVX_FIB: esc->table = fibonacci;    break;
-    case CODEC_ID_8SVX_EXP: esc->table = exponential;  break;
-    case CODEC_ID_PCM_S8_PLANAR:
-    case CODEC_ID_8SVX_RAW: esc->table = NULL;         break;
-    default:
-        av_log(avctx, AV_LOG_ERROR, "Invalid codec id %d.\n", avctx->codec->id);
-        return AVERROR_INVALIDDATA;
-    }
-    avctx->sample_fmt = AV_SAMPLE_FMT_U8;
-
-    avcodec_get_frame_defaults(&esc->frame);
-    avctx->coded_frame = &esc->frame;
-
+    avctx->sample_fmt = SAMPLE_FMT_S16;
     return 0;
 }
 
-static av_cold int eightsvx_decode_close(AVCodecContext *avctx)
-{
-    EightSvxContext *esc = avctx->priv_data;
-
-    av_freep(&esc->samples);
-    esc->samples_size = 0;
-    esc->samples_idx = 0;
-
-    return 0;
-}
-
-AVCodec ff_eightsvx_fib_decoder = {
+AVCodec eightsvx_fib_decoder = {
   .name           = "8svx_fib",
-  .type           = AVMEDIA_TYPE_AUDIO,
+  .type           = CODEC_TYPE_AUDIO,
   .id             = CODEC_ID_8SVX_FIB,
   .priv_data_size = sizeof (EightSvxContext),
   .init           = eightsvx_decode_init,
   .decode         = eightsvx_decode_frame,
-  .close          = eightsvx_decode_close,
-  .capabilities   = CODEC_CAP_DR1,
   .long_name      = NULL_IF_CONFIG_SMALL("8SVX fibonacci"),
 };
 
-AVCodec ff_eightsvx_exp_decoder = {
+AVCodec eightsvx_exp_decoder = {
   .name           = "8svx_exp",
-  .type           = AVMEDIA_TYPE_AUDIO,
+  .type           = CODEC_TYPE_AUDIO,
   .id             = CODEC_ID_8SVX_EXP,
   .priv_data_size = sizeof (EightSvxContext),
   .init           = eightsvx_decode_init,
   .decode         = eightsvx_decode_frame,
-  .close          = eightsvx_decode_close,
-  .capabilities   = CODEC_CAP_DR1,
   .long_name      = NULL_IF_CONFIG_SMALL("8SVX exponential"),
 };
-
-AVCodec ff_pcm_s8_planar_decoder = {
-    .name           = "pcm_s8_planar",
-    .type           = AVMEDIA_TYPE_AUDIO,
-    .id             = CODEC_ID_PCM_S8_PLANAR,
-    .priv_data_size = sizeof(EightSvxContext),
-    .init           = eightsvx_decode_init,
-    .close          = eightsvx_decode_close,
-    .decode         = eightsvx_decode_frame,
-    .capabilities   = CODEC_CAP_DR1,
-    .long_name      = NULL_IF_CONFIG_SMALL("PCM signed 8-bit planar"),
-};

libavcodec/a64colors.h

@@ -1,52 +0,0 @@
-/*
- * a64 video encoder - c64 colors in rgb (Pepto)
- * Copyright (c) 2009 Tobias Bindhammer
- *
- * This file is part of FFmpeg.
- *
- * FFmpeg is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * FFmpeg is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with FFmpeg; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/**
- * @file
- * a64 video encoder - c64 colors in rgb
- */
-
-#ifndef AVCODEC_A64COLORS_H
-#define AVCODEC_A64COLORS_H
-
-#include <stdint.h>
-
-/* c64 palette in RGB */
-static const uint8_t a64_palette[16][3] = {
-    {0x00, 0x00, 0x00},
-    {0xff, 0xff, 0xff},
-    {0x68, 0x37, 0x2b},
-    {0x70, 0xa4, 0xb2},
-    {0x6f, 0x3d, 0x86},
-    {0x58, 0x8d, 0x43},
-    {0x35, 0x28, 0x79},
-    {0xb8, 0xc7, 0x6f},
-    {0x6f, 0x4f, 0x25},
-    {0x43, 0x39, 0x00},
-    {0x9a, 0x67, 0x59},
-    {0x44, 0x44, 0x44},
-    {0x6c, 0x6c, 0x6c},
-    {0x9a, 0xd2, 0x84},
-    {0x6c, 0x5e, 0xb5},
-    {0x95, 0x95, 0x95},
-};
-
-#endif /* AVCODEC_A64COLORS_H */