Interlaced videos can contain progressive frames too and now wrong scantable
is selected for them.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Interlaced videos can contain progressive frames too and now wrong scantable
is selected for them.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avcodec: add support for planar signed 8-bit PCM.
ra144enc: add sample_fmts list to ff_ra_144_encoder
smackaud: use uint8_t* for 8-bit output buffer type
smackaud: clip output samples
smackaud: use sign_extend() for difference value instead of casting
sipr: use a function pointer to select the decode_frame function
sipr: set mode based on block_align instead of bit_rate
sipr: do not needlessly set *data_size to 0 when returning an error
ra288: fix formatting of LOCAL_ALIGNED_16
udp: Allow specifying the local IP address
VC1: Add bottom field offset to block_index[] to avoid rewriting (+10L)
vc1dec: move an if() block.
vc1dec: use correct hybrid prediction threshold.
vc1dec: Partial rewrite of vc1_pred_mv()
vc1dec: take ME precision into account while scaling MV predictors.
lavf: don't leak corrupted packets
Conflicts:
libavcodec/8svx.c
libavcodec/ra288.c
libavcodec/version.h
libavformat/iff.c
libavformat/udp.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The current code is a generalization of the earlier progressive MV
prediction code. This was supposed to predict MVs for both interlaced
and progressive pictures. But the interlaced MV prediction is buggy
and works mostly by luck.
This partially fixes interlaced MV prediction.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
id3v2: fix doxy comment - 'machine byte order' makes no sense on char arrays
VC1: restore mistakenly removed code
twinvq: check output buffer size before decoding
twinvq: return an error when the packet size is too small
lavf: export some forgotten symbols with non-av prefixes.
swscale: update altivec yuv2planeX asm to new per-plane API.
swscale: make yuv2yuvX_10_sse2/avx 8/9/16-bits aware.
yuv2planeX10 SIMD
swscale: decide whether to use yuv2plane1/X on a per-plane basis.
swscale: reintroduce full precision in 16-bit output.
Split up yuv2yuvX functions
Split out yuv2yuv1 luma and chroma in order to make them generic DSP functions
lavc: replace references to deprecated AVCodecContext.error_recognition to use AVCodecContext.err_recognition
lavc: translate non-flag-based er options into flag-based ef options at codec open
add -err_filter AVOptions to access flag-based error recognition
h264_weight: initialize "height" function argument properly.
presets: spelling error in libvpx 1080p50_60
avplay: fix fullscreen behaviour with SDL 1.2.14 on Mac OS X
Conflicts:
ffplay.c
libavformat/libavformat.v
libswscale/swscale.c
libswscale/x86/swscale_template.c
tests/ref/lavfi/pixfmts_scale
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The code was mistakenly removed in cad16562c8.
It stored some motion vector data for future use in B-pictures.
This fixes Bugzilla bug #57.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
presets: rename presets directory
lavc: make avcodec_get_context_defaults3 "officially" public
lavf: replace av_new_stream->avformat_new_stream part II.
lavf,lavd: replace av_new_stream->avformat_new_stream part I.
lavf: add avformat_new_stream as a replacement for av_new_stream.
Use correct scaling table for bwd-pred MVs in second B-field
Ut Video decoder
Makefile: change presets extension to .avpreset
lavfi: add rgbtestsrc source, ported from MPlayer libmpcodecs
lavfi: add testsrc source
AVOptions: add documentation.
presets: update libx264 ffpresets
Conflicts:
Changelog
doc/APIchanges
doc/ffmpeg.texi
ffpresets/libx264-ipod320.ffpreset
ffpresets/libx264-ipod640.ffpreset
ffserver.c
libavcodec/avcodec.h
libavcodec/options.c
libavcodec/version.h
libavdevice/libdc1394.c
libavfilter/avfilter.h
libavfilter/vsrc_testsrc.c
libavformat/flvdec.c
libavformat/riff.c
libavformat/version.h
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When scaling backward predicted MVs in second B-field, the scaling table is
opposite of that for P field pictures; i.e. first field P table will be used as
second field B table and second field P table will be used as first field B
table. This is not documented in the spec, but exists in the ref. decoder.
This fixes SA10139.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (34 commits)
h264: reset h->ref_count in case of errors in ff_h264_decode_ref_pic_list_reordering()
error_resilience: fix the check for missing references in ff_er_frame_end() for H264
4xm: prevent NULL dereference with invalid huffman table
4xmdemux: prevent use of uninitialized memory
4xm: clear FF_INPUT_BUFFER_PADDING_SIZE bytes in temporary buffers
ptx: check for out of bound reads
tiffdec: fix out of bound reads/writes
eacmv: check for out of bound reads
eacmv: fix potential pointer arithmetic overflows
adpcm: fix out of bound reads due to integer overflow
anm: prevent infinite loop
avsdemux: check for out of bound writes
avs: check for out of bound reads
avsdemux: check for corrupted data
AVOptions: refactor set_number/write_number
AVOptions: cosmetics, rename static av_set_number2() to write_number().
AVOptions: cosmetics, move and rename static av_set_number().
AVOptions: split av_set_string3 into opt type-specific functions
avidec: fix signed overflow in avi_sync()
mxfdec: Fix some buffer overreads caused by the misuse of AVPacket related functions.
...
Conflicts:
Changelog
configure
libavcodec/ptx.c
libavcodec/ra144.c
libavcodec/vaapi_vc1.c
libavcodec/vc1.c
libavcodec/version.h
libavformat/4xm.c
libavformat/avidec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vp6: partially propagate huffman tree building errors during coeff model parsing and fix misspelling
mpeg12: propagate chunk decode errors and fix conditional indentation
vc1: fix VC-1 Pulldown handling.
VC1: Fix first/last row checks with slices
mp4: Handle non-trivial ES Descriptors.
vc1: properly zero coded_block[] edges on new slice entry.
Conflicts:
libavcodec/vc1dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Pulldown flags are being set incorrectly and AVFrame->repeat_pict is not
being set. Also, skipped frames exit header parsing too early and do not
set pulldown flags appropriately. Ticks_per_frame needs to be set and
time_base adjusted so player can extend frame duration by a field time.
This fixes problems encountered when attempting to transcode HD-DVD EVOB
files with HandBrake. Also makes these files play smoothly in avplay.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
In some places 0/mb_height were used in place of start_mb_y/end_mb_y.
Fixes SA00049, SA00058, SA10091, SA10097, SA10131, SA20021, SA30030
Improves PSNR in SA00054, SA00059, SA00060, SA10096, SA10098, SA20022,
SA30031, SA30032, SA40012, SA40013
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
avconv: print the codecs names in the stream mapping.
avconv: move the avcodec_find_decoder() call to add_input_streams().
Windows Media Image decoder (WMVP/WVP2)
ac3enc: remove outdated TODO comment for apply_channel_coupling()
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/vc1dec.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
avcodec_set_dimensions should be used for size changes to ensure
compatibility with future changes.
avctx->width/avctx->height may not be set to display-only dimensions.
Even more so since vc1dec.c would later set coded_width/height based
on this.
coded_width/coded_height should be used instead of width/height for
decoder setup.
This fixes playback of e.g. zz-mcr-nsqr.vc1 sample (containing
display width/height settings) in MPlayer and should fix a crash
with MPC: http://forum.doom9.org/showthread.php?t=162221.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
mxfdec: Include FF_INPUT_BUFFER_PADDING_SIZE when allocating extradata.
H.264: tweak some other x86 asm for Atom
probe: Fix insane flow control.
mpegts: remove invalid error check
s302m: use nondeprecated audio sample format API
lavc: use designated initialisers for all codecs.
x86: cabac: add operand size suffixes missing from 6c32576
Conflicts:
libavcodec/ac3enc_float.c
libavcodec/flacenc.c
libavcodec/frwu.c
libavcodec/pictordec.c
libavcodec/qtrleenc.c
libavcodec/v210enc.c
libavcodec/wmv2dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
FF_COMMON_FRAME holds the contents of the AVFrame structure and is also copied
to struct Picture. Replace by an embedded AVFrame structure in struct Picture.
* qatar/master: (36 commits)
ARM: allow unaligned buffer in fixed-point NEON FFT4
fate: test more FFT etc sizes
dca: set AVCodecContext frame_size for DTS audio
YASM: Shut up unused variable compiler warning with --disable-yasm.
x86_32: Fix build on x86_32 with --disable-yasm.
iirfilter: add fate test
doxygen: Add qmul docs.
ogg: propagate return values and return more meaningful error values
H.264: fix overreads of qscale_table
Remove unused static tables and static inline functions.
eval: clear Parser instances before using
dct-test: remove 'ref' function pointer from tables
build: Remove deleted 'check' target from .PHONY list.
oggdec: Abort Ogg header parsing when encountering a data packet.
Add LGPL license boilerplate to files lacking it.
mxfenc: small typo fix
doxygen: Fix documentation for some VP8 functions.
sha: use AV_RB32() instead of assuming buffer can be cast to uint32_t*
des: allow unaligned input and output buffers
aes: allow unaligned input and output buffers
...
Conflicts:
libavcodec/dct-test.c
libavcodec/libvpxenc.c
libavcodec/x86/dsputil_mmx.c
libavcodec/x86/h264_qpel_mmx.c
libavfilter/x86/gradfun.c
libavformat/oggdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ARM: ac3: update ff_ac3_extract_exponents_neon per 8b7b2d6
ARM: NEON optimised vector_clip_int32()
swscale: disable full_chroma_int when converting to non-24/32bpp RGB.
suggest to use av_get_bytes_per_sample() in av_get_bits_per_sample_format() doxy
ffmpeg: use av_get_bytes_per_sample() in place of av_get_bits_per_sample_fmt()
put_bits: remove ALT_BITSTREAM_WRITER
put_bits: always use intreadwrite.h macros
libavformat: Add an example how to use the metadata API
doxygen: Prefer member groups over grouping into modules
doxygen: be more permissive when searching for API examples
avformat: doxify the Metadata API
lavf: restore old behavior for custom AVIOContex with an AVFMT_NOFILE format.
lavf: use the correct pointer in av_open_input_stream().
avidec: infer absolute vs relative index from first packet
Conflicts:
libavformat/Makefile
libavformat/avidec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Before this, almost all module groups have been used for grouping functions
and fields in structures semantically. This causes them to not appear
properly in the file documentation and needlessly clutters up the "Modules"
index.
Additionally, this commit streamlines some spelling and appearances.
read_sequence_header can change width/height; therefore, re-initialize
all tables if width/height changed
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master: (23 commits)
doc: Check standalone compilation before submitting new components.
Fix standalone compilation of pipe protocol.
Fix standalone compilation of ac3_fixed encoder.
Fix standalone compilation of binkaudio_dct / binkaudio_rdft decoders.
Fix standalone compilation of IMC decoder.
Fix standalone compilation of WTV demuxer.
Fix standalone compilation of MXPEG decoder.
flashsv: K&R cosmetics
matroskaenc: fix memory leak
vc1: make overlap filter for I-frames bit-exact.
vc1dec: use s->start/end_mb_y instead of passing them as function args.
Revert "VC1: merge idct8x8, coeff adjustments and put_pixels."
Replace strncpy() with av_strlcpy().
indeo3: Eliminate use of long.
get_bits: make cache unsigned to eliminate undefined signed overflow.
asfdec: fix assert failure on invalid files
avfilter: check malloc return values.
Not pulled as reason for reindent is not pulled: mpegvideo: reindent.
nutenc: check malloc return values.
Not pulled due to much simpler solution in ffmpeg *: don't av_malloc(0).
...
Conflicts:
doc/developer.texi
libavcodec/Makefile
libavcodec/get_bits.h
libavcodec/mpegvideo.c
libavformat/Makefile
libavutil/log.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit f8bed30d8b. The reason
for this is that the overlap filter, which runs after IDCT, should run
on unclamped values, and thus IDCT and put_pixels() cannot be merged if
we want to attempt to be bitexact.
* qatar/master:
ac3dec: fix processing of delta bit allocation information.
vc1: fix fate-vc1 after previous commit.
wmv3dec: fix playback of complex WMV3 files using simple_idct.
make av_dup_packet() more cautious on allocation failures
make containers pass palette change in AVPacket
introduce side information for AVPacket
Politic commits that have not been pulled:
Update regtest checksums after revision 6001dad.
Replace more FFmpeg references by Libav.
Replace references to ffmpeg-devel with libav-devel; fix roundup URL.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
PROFILE_ADVANCED doesn't set res_fasttx, so make that a special case
in the condition that decides which IDCT to use (and whether to read
coefficients transposed or not).
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
IDCT coefficients are read transposed, but simple_idct does not expect
this. Therefore, only do tranposed coefficient reading if we're not
using simple_idct.
Fixes http://forum.videolan.org/viewtopic.php?f=14&t=89651
* qatar/master:
avio: add more documentation for AVIOContext.
Parse sprite data for WMVP and WVP2, and decode sprites for the latter
Replace outdated info on the FAQ
Redefine sameq
pad: fix example explanation
gradfun: add notice from the MPlayer manual
eval: add support for trunc, ceil, and floor functions
documentation: add setdar and setsar description to filters.texi
avio: document some members of AVIOContext.
avio: document avio_close().
avio: cosmetics, vertically align comments.
avio: cosmetics, group the reading functions.
avio: cosmetics, merge all the FF_API_OLD_AVIO blocks.
avio: cosmetics, move AVIOContext to start of the file.
avio: update file header.
os: fix OpenBSD/PowerPC compilation
pixfmt: add PIX_FMT_BGR48LE and PIX_FMT_BGR48BE
oggdec: fix demuxing chained audio streams
fix typo
Conflicts:
doc/filters.texi
libavformat/avio.h
libavutil/pixfmt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The pulldown flags should be communicated to the client of the libavcodec library. Not doing so causes jerky playback with pulldown content. Note that this change requires the patch previously provided here: http://ffmpeg.org/pipermail/ffmpeg-devel/2011-April/110314.html
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fixed-point MDCT with 32-bit unscaled output
lavc: deprecate rate_emu
lavc: mark hurry_up for removal on next major bump
parser: mark av_parser_parse() for removal on next major bump
lavc: add missing audioconvert includes
jvdec: don't use deprecated CODEC_TYPE_*/PKT_FLAG_KEY
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master: (33 commits)
Fix an infinite loop when RoQ encoded generated a frame with a size greater than the maximum valid size.
Add kbdwin.o to AC3 decoder
Detect byte-swapped AC-3 and support decoding it directly.
cosmetics: indentation
Always copy input data for AC3 decoder.
ac3enc: make sym_quant() branch-free
cosmetics: indentation
Add a CPU flag for the Atom processor.
id3v2: skip broken tags with invalid size
id3v2: don't explicitly skip padding
Make sure kbhit() is in conio.h
fate: update wmv8-drm reference
vc1: make P-frame deblock filter bit-exact.
configure: Add the -D parameter to the dlltool command
amr: Set the AVFMT_GENERIC_INDEX flag
amr: Set the pkt->pos field properly to the start of the packet
amr: Set the codec->bit_rate field based on the last packet
rtsp: Specify unicast for TCP interleaved streams, too
Set the correct target for mingw64 dlltool
applehttp: Change the variable for stream position in seconds into int64_t
...
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/ac3dec.c
libavformat/avio.h
libavformat/id3v2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Advantage is that it allows us to combine several loops into a single
one, and these can eventually be merged into the IDCT itself. Also, it
allows us to remove vc1_put_block(), and makes CODEC_FLAG_GRAY faster.
Advanced profile never uses "range reduction", so vc1_put_block() quite
literally just calls put_pixels_clamped() from vc1_decode_i_blocks_adv().
By inlining the function, we can prevent calling IDCT8x8 if
CODEC_FLAG_GRAY is set, and we don't have to scale the coeffs in the
[0,256] range, but can instead use put_signed_pixels_clamped().
Passing an explicit filename to this command is only necessary if the
documentation in the @file block refers to a file different from the
one the block resides in.
Originally committed as revision 22921 to svn://svn.ffmpeg.org/ffmpeg/trunk
MPV_common_init(), so calling both is redundant and leads to memory
leaks in WMV3/VC-1 decoder. Thus use only the first function in
WMV3/VC-1 decoder initialization.
Originally committed as revision 22024 to svn://svn.ffmpeg.org/ffmpeg/trunk
search for real extradata start instead of always skipping one byte.
Patch by Andrew Dennison gmailify(${name}d, lists)
Thread: [PATCH] Fix VC1 "Incomplete extradata" for mkv files generated by eac3to
Originally committed as revision 20178 to svn://svn.ffmpeg.org/ffmpeg/trunk
VLC tables should only be initialized from one place.
This initializes/calculates more VLC tables than necessary for VC1 decoding,
but this is only done once and only a small overhead in time and space (maybe
30 kB) it seems not worth adding a separate function.
Originally committed as revision 20010 to svn://svn.ffmpeg.org/ffmpeg/trunk
These are only supposed to be called once per row, not once per macroblock.
~1.5% faster according to oprofile.
Originally committed as revision 19213 to svn://svn.ffmpeg.org/ffmpeg/trunk
~8% faster VC-1 decoding.
Possible future optimization: clear blocks after use instead of before, and for
DC-only blocks, only clear the DC coefficient.
Originally committed as revision 19205 to svn://svn.ffmpeg.org/ffmpeg/trunk
Includes mmx2 asm for the various functions.
Note that the actual idct still does not have an x86 SIMD implemtation.
For wmv3 files using regular idct, the decoder just falls back to simple_idct,
since simple_idct_dc doesn't exist (yet).
Originally committed as revision 19204 to svn://svn.ffmpeg.org/ffmpeg/trunk
