This reverts commit 599888a480.
The commit does not silence the warning on ELF-based systems, and will be
fixed in the subsequent commit.
Conflicts:
libavcodec/x86/fft_mmx.asm
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* rbultje/vp9-bugfixes:
vp9: match another find_ref_mvs() bug in libvpx.
vp9: fix scaled motion vector clipping for sub8x8 blocks.
vp9: improve signbias check.
vp9: don't allow compound references if error_resilience is enabled.
vp9: clamp segmented lflvl before applying ref/mode deltas.
vp9: reset loopfilter mode/ref deltas on keyframe.
vp9: fix crash when playing back 440/440 content with width%64<56.
vp9: extend loopfilter workaround for vp9 h/v mix-up to work for 422.
vp9: clip motion vectors in the same way as libvpx does.
vp9: set skip flag if the block had no coded coefficients.
vp9: apply mv scaling workaround only when subsampling is enabled.
vp9: read all 4x4 blocks in sub8x8 blocks individually with scalability.
vp9: fix segmentation map referencing upon framesize change.
vp9: disable more pmulhrsw optimizations in idct16/32.
vp9: disable all pmulhrsw in 8/16 iadst x86 optimizations.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
See sample vp90-2-14-resize-fp-tiles-16-8-4-2-1.webm from the vp9 test
vector set which reproduces the issue. This probably costs a few cycles,
but I don't think there's an easy way to workaround that.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When the decoder is deactivated, the x86-optimized versions are
not compiled, resulting in a link error.
The C version is unaffected, as it is part of the idctdsp
subsystem.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The main difference consists in renaming properly labels, and
letting yasm select the gprs for skipping 1D transforms.
Previous-version-reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Based on patch by Francisco Blas Izquierdo Riera
Commit message partly taken from carl
fixes a compilation
error in mlpdsp_init.c with -fstack-check and some gcc compilers (I
reproduced the issue with gcc 4.7.3) by simplifying the code.
See also https://bugs.gentoo.org/show_bug.cgi?id=471756
$ make libavcodec/x86/mlpdsp_init.o
libavcodec/x86/mlpdsp_init.c: In function ‘mlp_filter_channel_x86’:
libavcodec/x86/mlpdsp_init.c:142:5: error: can’t find a register in
class ‘GENERAL_REGS’ while reloading ‘asm’
libavcodec/x86/mlpdsp_init.c:142:5: error: ‘asm’ operand has impossible
constraints
4551 -> 4509 dezicycles
Reviewed-by: Ramiro Polla <ramiro.polla@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The 3*stride value stored in r3src can be loaded much later,
so use r3src instead of a dedicated gpr when possible.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The second stride is always the internal buffer one, MAX_PB_SIZE (times 2 to
get the value in bytes).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The width parameter is now completely at the back, and actually
never used. This helps understanding the actual parameter list.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Their intent was to make the DSP work with wmalossless pro.
The later was fixed to work with the DSP.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
pb_eo must be handled as a rip relative address for MSVC64, so an
intermediate register is needed. Should fix link failures.
Suggested by Hendrik Leppkes and Christophe Gisquet.
Tested-By: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The epel_hv functions were still relying on only epel_hv 8-wide
being the maximum width instanciated.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit 3b4ffba3af.
Unbreaks the SSSE3 code on mingw32
Conflicts:
libavcodec/x86/lossless_audiodsp.asm
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is needed as the mmx code is used as fallback from the ssse3 code
Suggested-by: jamrial
Tested-by: wm4
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Original x86 intrinsics code by Pierre-Edouard Lepere.
Yasm port, refactoring and optimizations by James Almer.
Benchmarks of BQTerrace_1920x1080_60_qp22.bin with an Intel Core i5-4200U
Width 32
342694 decicycles in sao_edge_filter_10, 16384 runs, 0 skips
29476 decicycles in ff_hevc_sao_edge_filter_32_10_ssse3, 16384 runs, 0 skips
13996 decicycles in ff_hevc_sao_edge_filter_32_10_avx2, 16381 runs, 3 skips
Width 64
581163 decicycles in sao_edge_filter_10, 8192 runs, 0 skips
59774 decicycles in ff_hevc_sao_edge_filter_64_10_ssse3, 8192 runs, 0 skips
28383 decicycles in ff_hevc_sao_edge_filter_64_10_avx2, 8191 runs, 1 skips
Signed-off-by: James Almer <jamrial@gmail.com>
Original x86 intrinsics code and initial yasm port by Pierre-Edouard Lepere.
Refactoring and optimizations by James Almer.
Benchmarks of BQTerrace_1920x1080_60_qp22.bin with an Intel Core i5-4200U
Width 32
158583 decicycles in edge, sao_edge_filter_8 runs, 0 skips
5205 decicycles in ff_hevc_sao_edge_filter_32_8_ssse3, 32767 runs, 1 skips
2942 decicycles in ff_hevc_sao_edge_filter_32_8_avx2, 32767 runs, 1 skips
Width 64
705639 decicycles in sao_edge_filter_8, 262144 runs, 0 skips
19224 decicycles in ff_hevc_sao_edge_filter_64_8_ssse3, 262111 runs, 33 skips
10433 decicycles in ff_hevc_sao_edge_filter_64_8_avx2, 262115 runs, 29 skips
Signed-off-by: James Almer <jamrial@gmail.com>
Before
2843 decicycles in ff_sbr_autocorrelate_sse3, 262086 runs, 58 skips
After
2693 decicycles in ff_sbr_autocorrelate_sse3, 262117 runs, 27 skips
Signed-off-by: James Almer <jamrial@gmail.com>
x86inc can translate r*m into a register or stack on its own
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Also a slight change to the ssse3 code, which prevents a theoretical
overflow in the sharp filter.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
These fix failures of --enable-xmm-clobber-test
It would be better to change the code to use fewer registers, but until
someone does the used register count must not be too small
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes artifacts in the last pixel of rows with some widths and pixel formats
Found-by: Dominique Leroux <Dominique.Leroux@autodesk.com>
Tested-by: Dominique Leroux <Dominique.Leroux@autodesk.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
For test images manually generated to contain only up prediction,
timing results:
8380x3032 255x185
before: 138635 1992
after: 139232 1996
Actually jumping to the proper version depending on the alignment:
8380x3032: 138767
A 0.5% speed improvement for gigantic images is not worth the code
duplication.
Fixes ticket #4148
Signed-off-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Tested-by: Benoit Fouet <benoit.fouet@free.fr>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
11674 -> 10877 decicycles on my Phenom II.
Overall speedup was unfortunately within measurement error.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Handle it inside the __asm__() block.
Fixes fate-vc1_ilaced_twomv when using the gcc-usan toolchain.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
cherry picked from commit df8ebe304df453f26c28ff8f11d607f49b90a4c2
Fixes out of array access
Fixes: asan_stack-oob_1046454_9_asan_stack-oob_15a9e7c_170_WP_MAIN10_B_Toshiba_3.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
~15% faster.
Also add an mmxext version that takes advantage of the new code, and
build it alongside with the mmx version only on x86_32.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
It may be used by ff_add_pixels_clamped_sse2().
Should fix fate-cavs failures on some systems.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Also add sse2 versions for both.
put_pixels_clamped port and sse2 version originally written by Timothy Gu.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Same behavior as in simple_idct.
This way the best optimized versions available will be used instead.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Roughly 25% faster MC than ssse3 for blocksizes 32 and 64.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Also add mmxext versions of vsad8 and vsad_intra8, and sse2 versions of
vsad16 and vsad_intra16.
Since vsad8 and vsad16 are not bitexact, they are accordingly marked as
approximate.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
No point in having the sad8 functions separate now that the loop is no
longer unrolled.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
This adds back support for 8x4 and 8x16
it does not support 8x2, i think nothing uses that
Found-by: ubitux
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also add a missing c->pix_abs[0][0] initialization, and sse2 versions of
sad16_x2, sad16_y2 and sad16_xy2 (%15 to %20 faster than mmxext).
Since the _xy2 versions are not bitexact, they are accordingly marked as
approximate.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This lets the cglobal macro automatically append a suffix to the function name.
This means that INIT_XMM avx must be used rather than INIT_AVX.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '95c0cec03acec0a80cc1c7db48f3b2355d9e767b':
idctdsp: Add global function pointers for {add|put}_pixels_clamped functions
Conflicts:
libavcodec/arm/idctdsp_init_arm.c
libavcodec/dct.h
libavcodec/idctdsp.c
libavcodec/jrevdct.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These function pointers already existed in the ARM code. Adding them globally
allows calls to the function pointers to access arch-optimized versions of the
functions transparently.
