CONFIG_VDPAU is the condition on which ff_vdpau_mpeg_picture_complete
is compiled in, so it is more appropriate, particularly since the
separate VDPAU decoder should be removed in the longer term.
thread_count passed to ff_thread_init() is only used to set AVCodecContext.
thread_count, and can be removed. Instead move it to the legacy implementation
of avcodec_thread_init().
This also fixes the problem that calling avcodec_thread_init() with pthreads
enabled did not set it since ff1efc524c.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Currently, the parser is buggy and only processes the stream extradata
when the flag is set. This fixes it to actually inspect the frames.
Whitespce will be fixed in a separate change.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master: (22 commits)
ac3enc: move extract_exponents inner loop to ac3dsp
avio: deprecate url_get_filename().
avio: deprecate url_max_packet_size().
avio: make url_get_file_handle() internal.
avio: make url_filesize() internal.
avio: make url_close() internal.
avio: make url_seek() internal.
avio: cosmetics, move AVSEEK_SIZE/FORCE declarations together
avio: make url_write() internal.
avio: make url_read_complete() internal.
avio: make url_read() internal.
avio: make url_open() internal.
avio: make url_connect internal.
avio: make url_alloc internal.
applehttp: Merge two for loops
applehttp: Restructure the demuxer to use a custom AVIOContext
applehttp: Move finished and target_duration to the variant struct
aacenc: reduce the number of loop index variables
avio: deprecate url_open_protocol
avio: deprecate url_poll and URLPollEntry
...
Conflicts:
libavformat/applehttp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The pulldown flags should be communicated to the client of the libavcodec library. Not doing so causes jerky playback with pulldown content. Note that this change requires the patch previously provided here: http://ffmpeg.org/pipermail/ffmpeg-devel/2011-April/110314.html
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The attached patch fixes the jerky playback of VC-1 content with pulldown. The pulldown flags were incorrectly set. They must be correct in order to display the frames with the correct timing as mentioned in the specifications: "SMPTE 421M: VC-1 Compressed Video Bitstream Format and Decoding Process". More precisely the following tables:
Table 20: Progressive P picture layer bitstream for Advanced Profile
Table 22: Progressive B picture layer bitstream for Advanced Profile
Table 23: Progressive Skipped picture layer bitstream for Advanced Profile
Table 82: Interlaced Frame I and BI picture layer bitstream for Advanced Profile
Table 83: Interlaced Frame P picture layer bitstream for Advanced Profile
Table 84: Interlaced Frame B picture layer bitstream for Advanced Profile
Table 85: Picture Layer bitstream for Field 1 of Interlace Field Picture for Advanced Profile
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: fix partial run when no samples path is specified
ARM: NEON fixed-point forward MDCT
ARM: NEON fixed-point FFT
lavf: bump minor version and add an APIChanges entry for avio changes
avio: simplify url_open_dyn_buf_internal by using avio_alloc_context()
avio: make url_fdopen internal.
avio: make url_open_dyn_packet_buf internal.
avio: avio_ prefix for url_close_dyn_buf
avio: avio_ prefix for url_open_dyn_buf
avio: introduce an AVIOContext.seekable field
ac3enc: use generic fixed-point mdct
lavfi: add fade filter
Change yadif to not use out of picture lines.
lavc: deprecate AVCodecContext.antialias_algo
lavc: mark mb_qmin/mb_qmax for removal on next major bump.
Conflicts:
doc/filters.texi
libavcodec/ac3enc_fixed.h
libavcodec/ac3enc_float.h
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/vf_fade.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the AC3 encoder use the shared fixed-point MDCT rather
than its own implementation. The checksum changes are due to
different rounding in the MDCT.
Signed-off-by: Mans Rullgard <mans@mansr.com>
commit c0ec9918b0
Author: Måns Rullgård <mans@mansr.com>
Date: Tue Aug 24 17:47:05 2010 +0000
Remove global mm_flags variable
Originally committed as revision 24909 to svn://svn.ffmpeg.org/ffmpeg/trunk
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fixed-point MDCT with 32-bit unscaled output
lavc: deprecate rate_emu
lavc: mark hurry_up for removal on next major bump
parser: mark av_parser_parse() for removal on next major bump
lavc: add missing audioconvert includes
jvdec: don't use deprecated CODEC_TYPE_*/PKT_FLAG_KEY
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ac3enc: ARM optimised ac3_compute_matissa_size
ac3: armv6 optimised bit_alloc_calc_bap
fate: simplify fft test rules
avio: document avio_alloc_context.
lavf: make compute_chapters_end less picky.
sierravmd: fix Indeo3 videos
FFT: simplify fft8()
fate: add fixed-point fft/mdct tests
Fixed-point support in fft-test
ape: check that number of seektable entries is equal to number of frames
Merged-by: Michael Niedermayer <michaelni@gmx.at>
TrueHD supports more channels than FFmpeg, so a valid sample
could set the channel layout to a value that represents less
channels than the sample actually consists of.
* newdev/master:
mpegts: propagate avio EOF in read_packet()
configure: Initial support for --target-os=symbian
Fixed-point FFT and MDCT
Include dependencies for test programs
ac3enc: simplify sym_quant()
flvdec: read index stored in the 'keyframes' tag.
mov: Add support for zero-sized stsc runs.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These expressions are equivalent since levels is always odd, and
overflow is impossible due to the constraints set by the assert().
Signed-off-by: Mans Rullgard <mans@mansr.com>
* newdev/master:
rtsp: Use GET_PARAMETER for keep-alive for generic RTSP servers
mlp_parse.c: set AVCodecContext channel_layout
APIChanges: mark the place where 0.6 was branched.
avio: make get_checksum() internal.
avio: move ff_crc04C11DB7_update() from avio.h -> avio_internal.h
avio: make init_checksum() internal.
NOT MERGED Add MxPEG decoder
NOT MERGED Add support for picture_ptr field in MJpegDecodeContext
NOT MERGED Move MJPEG's input buffer preprocessing in separate public function
NOT MERGED Support reference picture defined by bitmask in MJPEG's SOS decoder
sndio bug fix
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
ac3enc: move compute_mantissa_size() to ac3dsp
ac3enc: move mant*_cnt and qmant*_ptr out of AC3EncodeContext
Remove support for stripping executables
ac3enc: NEON optimised float_to_fixed24
ac3: move ff_ac3_bit_alloc_calc_bap to ac3dsp
dfa: protect pointer range checks against overflows.
Duplicate: mimic: implement multithreading.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* ffmpeg-mt/master:
Update todo. More items appeared...
Fix mdec
Duplicate: id3v1: change filesize to int64_t.
Duplicate: id3v1: Seek back to old position after reading.
Conflicts:
libavcodec/mpegvideo.c
libavcodec/snow.c
libavformat/id3v1.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
These fields are only used in quantize_mantissas() and reset
on each call, no need to store them in the main context.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* newdev/master:
ac3enc: avoid memcpy() of exponents and baps in EXP_REUSE case by using exponent reference blocks.
Chronomaster DFA decoder
DUPLICATE: framebuffer device demuxer
NOT MERGED: cosmetics: fix dashed line length after 070c5d0
http: header field names are case insensitive
Conflicts:
LICENSE
README
doc/indevs.texi
libavdevice/fbdev.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
ac3enc: Add codec-specific options for writing AC-3 metadata.
NOT MERGED: Remove arrozcru URL from documentation
sndio support for playback and record
Conflicts:
doc/faq.texi
doc/general.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
dsputil: allow to skip drawing of top/bottom edges.
Split fate-psx-str-v3 into a video-only and audio-only test.
Conflicts:
libavcodec/dsputil.c
libavcodec/mpegvideo.c
libavcodec/snow.c
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
As previously discussed, the CrystalHD hardware treats some PAFF
clips different from others; even when input fields are always in
separate packets, the hardware might return a single fieldpair for
one clip and individual fields for another.
Given the bogus flags set by the hardware, it is impossible to
distinguish these two cases without knowing about the current
picture and the next one. The hardware can usually provide the
picture number of the next picture and when that is available,
we can detect the two cases.
When it is not available, we have to guess - and find out later
if we were right or wrong.
With this change, clips will play correctly unless they are PAFF
where individual fields are returned *and* no next picture number
is available. Generally speaking, the incorrect cases arise in
the first couple of seconds of a clip as the delay calibration takes
place. Once that's set, things work fine.
As previously discussed, the CrystalHD hardware returns exceptionally
useless information about interlaced h.264 content - to the extent
that it's not possible to distinguish MBAFF and PAFF content until
it's too late.
This change introduces use of the h264_parser to help bridge the
gap; it can indicate if the input data is PAFF fields or not.
With this clarity, some of heuristics can be removed from the code,
making this less convoluted.
Finally, I found an MBAFF clip that acts like non h.264 content so
I had to make allowances for that.
Note that I still cannot distinguish between two forms of PAFF,
where the hardware either returns individual fields or a field-pair.
It's not clear that there's even a spec relevant difference between
the two forms, as opposed to hardware ideosyncracies.