* qatar/master:
avio: add more documentation for AVIOContext.
Parse sprite data for WMVP and WVP2, and decode sprites for the latter
Replace outdated info on the FAQ
Redefine sameq
pad: fix example explanation
gradfun: add notice from the MPlayer manual
eval: add support for trunc, ceil, and floor functions
documentation: add setdar and setsar description to filters.texi
avio: document some members of AVIOContext.
avio: document avio_close().
avio: cosmetics, vertically align comments.
avio: cosmetics, group the reading functions.
avio: cosmetics, merge all the FF_API_OLD_AVIO blocks.
avio: cosmetics, move AVIOContext to start of the file.
avio: update file header.
os: fix OpenBSD/PowerPC compilation
pixfmt: add PIX_FMT_BGR48LE and PIX_FMT_BGR48BE
oggdec: fix demuxing chained audio streams
fix typo
Conflicts:
doc/filters.texi
libavformat/avio.h
libavutil/pixfmt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The functions moved are used when decoding h264.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Unfortunately the output buffer size check assumes that the
input buffer is never over-consumed, thus this actually
also allowed to write outside the output buffer if "lucky".
AS libavcodec/arm/ac3dsp_armv6.o
ffmpeg-src/libavcodec/arm/ac3dsp_armv6.S: Assembler messages:
ffmpeg-src/libavcodec/arm/ac3dsp_armv6.S:40: Error: selected processor
does not support `movw r8,#0x1fe0'
make[1]: *** [libavcodec/arm/ac3dsp_armv6.o] Error 1
MOVW is ARMv7 way to load constant:
* movw, or move wide, will move a 16-bit constant into a register,
implicitly zeroing the top 16 bits of the target register.
* movt, or move top, will move a 16-bit constant into the top half
of a given register without altering the bottom 16 bits
To load 32 bit constant, movw lower16; movt upper16; is better than
ldr if available, because:
While this approach takes two instructions, it does not require any
extra space to store the constant so both the movw/movt method and the
ldr method will end up using the same amount of memory. Memory
bandwidth is precious in and the movw/movt approach avoids an extra
read on the data side, not to mention the read could have missed the
cache.
But here it is armv6 optimization, so that we have to use ldr.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The thread_type API allows you to request only FF_THREAD_FRAME (instead of
FRAME | SLICE), but it was being ignored.
We don't implement both of them at the same time, so there isn't an effect
on current codecs, except that you can request no kinds of threading now
(a bit useless).
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
As previously discussed, the CrystalHD hardware returns exceptionally
useless information about interlaced h.264 content - to the extent
that it's not possible to distinguish most MBAFF and PAFF content until
it's too late.
In an attempt to compensate for this, I'm introducing two mechanisms:
1) Peeking at the picture number of the next picture
The hardware provides a capability to peek the next picture number. If
it is the same as the current picture number, then we are clearly dealing
with two fields and not a frame or fieldpair.
If this always worked, it would be all we need, but it's not guaranteed
to work. Sometimes, the next picture may not be decoded sufficiently
for the number to be known; alternately, a corruption in the stream may
cause the hardware to refuse to return the number even if the next
intact frame is decoded. In either case, the query will return 0.
If we are unable to peek the next picture number, we assume that the
picture is a frame/fieldpair and return it accordingly. If that turns
out to be incorrect, we discard the second field, and the user has
to live with the glitch. In testing, false detection can occur for
the first couple of seconds, and then the pipeline stabalizes and
we get correct detection.
2) Use the h264_parser to detect when individual input fields have
been combined into an output fieldpair.
I have multiple PAFF samples where this behaviour is detected. The
peeking mechanism described above will correctly detect that the
output is a fieldpair, but we need to know what the input type was
to ensure pipeline stability (only return one output frame per input
frame).
If we find ourselves with an output fieldpair, yet the input picture
type was a field, as reported by the parser, then we are dealing with
this case, and can make sure not to return anything on the next
decode() call.
Taken together, these allow us to remove the hard-coded hacks for
different h.264 types, and we can clearly describe the conditions
under which we can trust the hardware's claim that content is
interlaced.
Signed-off-by: Philip Langdale <philipl@overt.org>
Now that we know the type of the input picture, we have to bring
that information to the output picture to help identify its type.
We do this by adding a field to the opaque_list node.
Signed-off-by: Philip Langdale <philipl@overt.org>
As the hardware is unreliable, we will have to use the h.264 parser
to identify whether an input picture is a field or a frame. This
change loads the parser and extracts the picture type.
Signed-off-by: Philip Langdale <philipl@overt.org>
In preparation for adding additional fields to the node, return
the node instead of the pts value. This requires the caller to
free the node.
Signed-off-by: Philip Langdale <philipl@overt.org>
I found another MBAFF sample where the input:output pattern is
the same as mpeg2 and vc1 (fieldpair input, individual field output).
While I'm not sure how you can output individual fields from MBAFF,
if I apply the mpeg2/vc1 handling to this file, it plays correctly.
So, this changes the detection algorithm to handle the known cases.
Whitespace will be fixed in a separate change.
Signed-off-by: Philip Langdale <philipl@overt.org>
* ffmpeg-mt/master:
DUPLICATE mingw32 compilation after 'unbreak avcodec_thread_init'
pthread: validate_thread_parameters() ignored slice-threading being intentionally off
DUPLICATE Remove unnecessary parameter from ff_thread_init() and fix behavior
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
proto: include os_support.h in network.h
matroskaenc: don't write an empty Cues element.
lavc: add a FF_API_REQUEST_CHANNELS deprecation macro
avio: move extern url_interrupt_cb declaration from avio.h to url.h
avio: make av_register_protocol2 internal.
avio: avio_ prefix for url_set_interrupt_cb.
avio: AVIO_ prefixes for URL_ open flags.
proto: introduce listen option in tcp
doc: clarify configure features
proto: factor ff_network_wait_fd and use it on udp
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fix parser: mark av_parser_parse() for removal on next major bump
swscale: postpone sws_getContext removal until next major bump.
fate: add AAC LATM test
mmst: get rid of deprecated AVERRORs
lxfdec: use AVERROR(ENOMEM) instead of deprecated AVERROR_NOMEM.
Reemove remaining uses of deprecated AVERROR_NOTSUPP.
REIMPLEMENTED in 2 lines of code: lavf: if id3v2 tag is present and all else fails, guess by file extension
Conflicts:
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
psymodel: extend API to include PE and bit allocation.
avio: always compile dyn_buf functions
Remove unnecessary parameter from ff_thread_init() and fix behavior
Revert "aac_latm_dec: use aac context and aac m4ac"
configure: tell user if libva is enabled like the rest of external libs.
Add silence support for AV_SAMPLE_FMT_U8.
avio: make URL_PROTOCOL_FLAG_NESTED_SCHEME internal
avio: deprecate av_url_read_seek
avio: deprecate av_url_read_pause
ac3enc: NEON optimised extract_exponents
Conflicts:
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
CONFIG_VDPAU is the condition on which ff_vdpau_mpeg_picture_complete
is compiled in, so it is more appropriate, particularly since the
separate VDPAU decoder should be removed in the longer term.
thread_count passed to ff_thread_init() is only used to set AVCodecContext.
thread_count, and can be removed. Instead move it to the legacy implementation
of avcodec_thread_init().
This also fixes the problem that calling avcodec_thread_init() with pthreads
enabled did not set it since ff1efc524c.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Currently, the parser is buggy and only processes the stream extradata
when the flag is set. This fixes it to actually inspect the frames.
Whitespce will be fixed in a separate change.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master: (22 commits)
ac3enc: move extract_exponents inner loop to ac3dsp
avio: deprecate url_get_filename().
avio: deprecate url_max_packet_size().
avio: make url_get_file_handle() internal.
avio: make url_filesize() internal.
avio: make url_close() internal.
avio: make url_seek() internal.
avio: cosmetics, move AVSEEK_SIZE/FORCE declarations together
avio: make url_write() internal.
avio: make url_read_complete() internal.
avio: make url_read() internal.
avio: make url_open() internal.
avio: make url_connect internal.
avio: make url_alloc internal.
applehttp: Merge two for loops
applehttp: Restructure the demuxer to use a custom AVIOContext
applehttp: Move finished and target_duration to the variant struct
aacenc: reduce the number of loop index variables
avio: deprecate url_open_protocol
avio: deprecate url_poll and URLPollEntry
...
Conflicts:
libavformat/applehttp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The pulldown flags should be communicated to the client of the libavcodec library. Not doing so causes jerky playback with pulldown content. Note that this change requires the patch previously provided here: http://ffmpeg.org/pipermail/ffmpeg-devel/2011-April/110314.html
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The attached patch fixes the jerky playback of VC-1 content with pulldown. The pulldown flags were incorrectly set. They must be correct in order to display the frames with the correct timing as mentioned in the specifications: "SMPTE 421M: VC-1 Compressed Video Bitstream Format and Decoding Process". More precisely the following tables:
Table 20: Progressive P picture layer bitstream for Advanced Profile
Table 22: Progressive B picture layer bitstream for Advanced Profile
Table 23: Progressive Skipped picture layer bitstream for Advanced Profile
Table 82: Interlaced Frame I and BI picture layer bitstream for Advanced Profile
Table 83: Interlaced Frame P picture layer bitstream for Advanced Profile
Table 84: Interlaced Frame B picture layer bitstream for Advanced Profile
Table 85: Picture Layer bitstream for Field 1 of Interlace Field Picture for Advanced Profile
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: fix partial run when no samples path is specified
ARM: NEON fixed-point forward MDCT
ARM: NEON fixed-point FFT
lavf: bump minor version and add an APIChanges entry for avio changes
avio: simplify url_open_dyn_buf_internal by using avio_alloc_context()
avio: make url_fdopen internal.
avio: make url_open_dyn_packet_buf internal.
avio: avio_ prefix for url_close_dyn_buf
avio: avio_ prefix for url_open_dyn_buf
avio: introduce an AVIOContext.seekable field
ac3enc: use generic fixed-point mdct
lavfi: add fade filter
Change yadif to not use out of picture lines.
lavc: deprecate AVCodecContext.antialias_algo
lavc: mark mb_qmin/mb_qmax for removal on next major bump.
Conflicts:
doc/filters.texi
libavcodec/ac3enc_fixed.h
libavcodec/ac3enc_float.h
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/vf_fade.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the AC3 encoder use the shared fixed-point MDCT rather
than its own implementation. The checksum changes are due to
different rounding in the MDCT.
Signed-off-by: Mans Rullgard <mans@mansr.com>
commit c0ec9918b0
Author: Måns Rullgård <mans@mansr.com>
Date: Tue Aug 24 17:47:05 2010 +0000
Remove global mm_flags variable
Originally committed as revision 24909 to svn://svn.ffmpeg.org/ffmpeg/trunk
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fixed-point MDCT with 32-bit unscaled output
lavc: deprecate rate_emu
lavc: mark hurry_up for removal on next major bump
parser: mark av_parser_parse() for removal on next major bump
lavc: add missing audioconvert includes
jvdec: don't use deprecated CODEC_TYPE_*/PKT_FLAG_KEY
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ac3enc: ARM optimised ac3_compute_matissa_size
ac3: armv6 optimised bit_alloc_calc_bap
fate: simplify fft test rules
avio: document avio_alloc_context.
lavf: make compute_chapters_end less picky.
sierravmd: fix Indeo3 videos
FFT: simplify fft8()
fate: add fixed-point fft/mdct tests
Fixed-point support in fft-test
ape: check that number of seektable entries is equal to number of frames
Merged-by: Michael Niedermayer <michaelni@gmx.at>
TrueHD supports more channels than FFmpeg, so a valid sample
could set the channel layout to a value that represents less
channels than the sample actually consists of.
* newdev/master:
mpegts: propagate avio EOF in read_packet()
configure: Initial support for --target-os=symbian
Fixed-point FFT and MDCT
Include dependencies for test programs
ac3enc: simplify sym_quant()
flvdec: read index stored in the 'keyframes' tag.
mov: Add support for zero-sized stsc runs.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These expressions are equivalent since levels is always odd, and
overflow is impossible due to the constraints set by the assert().
Signed-off-by: Mans Rullgard <mans@mansr.com>
* newdev/master:
rtsp: Use GET_PARAMETER for keep-alive for generic RTSP servers
mlp_parse.c: set AVCodecContext channel_layout
APIChanges: mark the place where 0.6 was branched.
avio: make get_checksum() internal.
avio: move ff_crc04C11DB7_update() from avio.h -> avio_internal.h
avio: make init_checksum() internal.
NOT MERGED Add MxPEG decoder
NOT MERGED Add support for picture_ptr field in MJpegDecodeContext
NOT MERGED Move MJPEG's input buffer preprocessing in separate public function
NOT MERGED Support reference picture defined by bitmask in MJPEG's SOS decoder
sndio bug fix
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
ac3enc: move compute_mantissa_size() to ac3dsp
ac3enc: move mant*_cnt and qmant*_ptr out of AC3EncodeContext
Remove support for stripping executables
ac3enc: NEON optimised float_to_fixed24
ac3: move ff_ac3_bit_alloc_calc_bap to ac3dsp
dfa: protect pointer range checks against overflows.
Duplicate: mimic: implement multithreading.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* ffmpeg-mt/master:
Update todo. More items appeared...
Fix mdec
Duplicate: id3v1: change filesize to int64_t.
Duplicate: id3v1: Seek back to old position after reading.
Conflicts:
libavcodec/mpegvideo.c
libavcodec/snow.c
libavformat/id3v1.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
These fields are only used in quantize_mantissas() and reset
on each call, no need to store them in the main context.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* newdev/master:
ac3enc: avoid memcpy() of exponents and baps in EXP_REUSE case by using exponent reference blocks.
Chronomaster DFA decoder
DUPLICATE: framebuffer device demuxer
NOT MERGED: cosmetics: fix dashed line length after 070c5d0
http: header field names are case insensitive
Conflicts:
LICENSE
README
doc/indevs.texi
libavdevice/fbdev.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
ac3enc: Add codec-specific options for writing AC-3 metadata.
NOT MERGED: Remove arrozcru URL from documentation
sndio support for playback and record
Conflicts:
doc/faq.texi
doc/general.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
dsputil: allow to skip drawing of top/bottom edges.
Split fate-psx-str-v3 into a video-only and audio-only test.
Conflicts:
libavcodec/dsputil.c
libavcodec/mpegvideo.c
libavcodec/snow.c
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
As previously discussed, the CrystalHD hardware treats some PAFF
clips different from others; even when input fields are always in
separate packets, the hardware might return a single fieldpair for
one clip and individual fields for another.
Given the bogus flags set by the hardware, it is impossible to
distinguish these two cases without knowing about the current
picture and the next one. The hardware can usually provide the
picture number of the next picture and when that is available,
we can detect the two cases.
When it is not available, we have to guess - and find out later
if we were right or wrong.
With this change, clips will play correctly unless they are PAFF
where individual fields are returned *and* no next picture number
is available. Generally speaking, the incorrect cases arise in
the first couple of seconds of a clip as the delay calibration takes
place. Once that's set, things work fine.
As previously discussed, the CrystalHD hardware returns exceptionally
useless information about interlaced h.264 content - to the extent
that it's not possible to distinguish MBAFF and PAFF content until
it's too late.
This change introduces use of the h264_parser to help bridge the
gap; it can indicate if the input data is PAFF fields or not.
With this clarity, some of heuristics can be removed from the code,
making this less convoluted.
Finally, I found an MBAFF clip that acts like non h.264 content so
I had to make allowances for that.
Note that I still cannot distinguish between two forms of PAFF,
where the hardware either returns individual fields or a field-pair.
It's not clear that there's even a spec relevant difference between
the two forms, as opposed to hardware ideosyncracies.
* newdev/master:
mov: set audio service type for AC-3 from bitstream mode in the 'dac3' atom.
Get audio_service_type for AC-3 based on bitstream mode in the AC-3 parser and decoder, and vice-versa for the AC-3 encoder.
Use audio_service_type to set stream disposition.
Add APIchanges entry for audio_service_type.
Add audio_service_type field to AVCodecContext for encoding and reporting of the service type in the audio bitstream.
configure: in check_ld, place new -l flags before existing ones
support @heading, @subheading, @subsubheading, and @subsubsection in texi2pod.pl
doc: update build system documentation
aacenc: indentation
aacenc: fix the side calculation in search_for_ms
vp8.c: rename EDGE_* to VP8_EDGE_*.
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavcodec/version.h
libavcodec/vp8.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
On Blu-ray colors are stored in the order YCrCb (and not YCbCr) as mentioned in the specifications:
see System Description Blu-ray Disc Read-Only Format, 9.14.4.2.2.1 Palette Definition Segment
When decoding a Blu-ray subtitle, the colors were incorrectly set.
On DVD and HD-DVD colors are stored in the order YCrCb (and not YCbCr) as mentioned in the specifications:
see DVD Specifications for Read-Only Disc / Part 3, 4.3 Program Chain Information (7) PGC_SP_PLT
see DVD Specifications for High Definition Disc, 5.2 Navigation for Standard Content (11) PGC_SDSP_PLT
see DVD Specifications for High Definition Disc, 5.2 Navigation for Standard Content (12) PGC_HDSP_PLT
see DVD Specifications for High Definition Disc, 5.5 Presentation Data (4) SET_COLOR2
When decoding a DVD or HD-DVD subtitle, the colors were incorrectly set.
* newdev/master:
matroskadec: set default duration for simple block
When building for MinGW32 disable strict ANSI compliancy.
ARM: fix ff_apply_window_int16_neon() prototype
configure: check for --as-needed support early
ARM: NEON optimised apply_window_int16()
ac3enc: NEON optimised shift functions
ac3enc: NEON optimised ac3_max_msb_abs_int16 and ac3_exponent_min
mpeg12.c: fix slice threading for mpeg2 field picture mode.
ffmetadec.c: fix compiler warnings.
configure: Don't explicitly disable ffplay or in/outdevices on dos
configure: Remove the explicit disabling of ffserver
configure: Add fork as a dependency to ffserver
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
avio: make udp_set_remote_url/get_local_port internal.
asfdec: also subtract preroll when reading simple index object
matroskaenc: remove a variable that's unused after bc17bd9.
avio: cosmetics - nicer vertical alignment.
Remove unnecessary icc version checks
Disable 'attribute "foo" ignored' warnings from icc
rtsp: Don't use a locale dependent format string
Add xd55 codec tag for XDCAM HD422 720p25 CBR files.
configure: get libavcodec version from new version.h header
lavc: move the version macros to a new installed header.
matroskaenc: simplify get_aac_sample_rates by using ff_mpeg4audio_get_config
Do not use format string "%0.3f" for RTSP Range field.
Add apply_window_int16() to DSPContext with x86-optimized versions and use it in the ac3_fixed encoder.
Document usage of import libraries created by dlltool
configure: Set the correct lib target for arm/wince dlltool
fate: simplify regression-funcs.sh
fate: add support for multithread testing
Conflicts:
libavformat/rtspdec.c
libavutil/attributes.h
libavutil/internal.h
libavutil/mem.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master: (33 commits)
Fix an infinite loop when RoQ encoded generated a frame with a size greater than the maximum valid size.
Add kbdwin.o to AC3 decoder
Detect byte-swapped AC-3 and support decoding it directly.
cosmetics: indentation
Always copy input data for AC3 decoder.
ac3enc: make sym_quant() branch-free
cosmetics: indentation
Add a CPU flag for the Atom processor.
id3v2: skip broken tags with invalid size
id3v2: don't explicitly skip padding
Make sure kbhit() is in conio.h
fate: update wmv8-drm reference
vc1: make P-frame deblock filter bit-exact.
configure: Add the -D parameter to the dlltool command
amr: Set the AVFMT_GENERIC_INDEX flag
amr: Set the pkt->pos field properly to the start of the packet
amr: Set the codec->bit_rate field based on the last packet
rtsp: Specify unicast for TCP interleaved streams, too
Set the correct target for mingw64 dlltool
applehttp: Change the variable for stream position in seconds into int64_t
...
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/ac3dec.c
libavformat/avio.h
libavformat/id3v2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows the AC-3 decoder to be used directly with RealMedia
decoders that unlike the libavformat one do not byte-swap automatically.
Since the new code is only used in case we would fail directly otherwise
there should be no risk for regressions.
Depending on error_recognition is not correct, low values do
certainly not mean it is ok to crash.
Based on a patch by Reimar Döffinger <Reimar.Doeffinger@gmx.de>
These windows do not really belong in fft/mdct files and were
easily confused with the similarly named tables used by rdft.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This function is not tightly coupled to mdct, and it's in the way
of making a fixed-point mdct implementation.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This removes the rather pointless wrappers (one not even inline)
for calling the fft_calc and related function pointers.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Since initially committed in 2004, this codec has only been touched
for maintenanance. Functionally, it contains no novel ideas and
its intended audience is better served by existing mature codecs.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This allows the AC-3 decoder to be used directly with RealMedia
decoders that unlike the libavformat one do not byte-swap automatically.
Since the new code is only used in case we would fail directly otherwise
there should be no risk for regressions.
The "buf" pointer needs to be overwritten since otherwise the CRC check fails.
3GPP:
Remove ffac from and move min_snr out of AacPsyBand.
Rearrange AacPsyCoeffs to make it easier to implement energy spreading.
Rename the band[] array to bands[]
Copy energies and thresholds at the end of analysis.
LAME:
Use a loop instead of an if chain in LAME windowing.
There are several places where a buffer is byte-swapped in 16-bit units.
This allows them to share code which can be optimised for various
architectures.
Signed-off-by: Mans Rullgard <mans@mansr.com>
If the function is not inlined, an immmediate cannot be used for the
shift parameter, so the %cl register must be used instead in that case.
This fixes compilation for x86-32 using gcc with --disable-optimizations.
This fixes unexpected name collisions that were occurring with variables
declared within the macros.
It also fixes the fate-acodec-ac3_fixed regression test on x86-32.
This reverts commit cc4d3dd3e2.
revert at authors request due to better impementation being available
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This increases the accuracy of coefficients, leading to improved quality.
Rescaling of the coefficients to full 25-bit accuracy is done rather than
offsetting the exponent values. This requires coefficient scaling to be done
before determining the rematrixing strategy. Also, the rematrixing strategy
calculation must use 64-bit math to prevent overflow due to the higher
precision coefficients.
The Broadcom CrystalHD decoder chips provide hardware video
decoding for a number of video formats. It does so using a
memory:memory interface where a compressed bitstream is fed
in and decompressed pictures are copied out. As such, it works
independent of any graphics hardware in the system.
Features supported in this initial version:
* Support for Linux (using current drivers/library from git.wilsonet.com)
* Support for 70015 hardware
* Formats: MPEG2, MPEG4 Part 2, H.264, VC1 and DivX 3.11 (untested)
* Progressive content
* Non-H.264 Interlaced content
* H.264 MBAFF content
Features missing in this initial version:
* Support for OSX (might work - untested)
* Support for Windows
* Support for 70012 hardware
* H.264 PAFF content
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts the removal of scoefs from AACEncContext.
It resulted in scoefs being a NULL pointer when
search_for_quantizers() is called.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This makes channel coupling more accurate, increasing quality for stereo
content. It also simplifies exponent extraction and mantissa quantization
by no longer needing to apply an offset to the exponents.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts the removal of scoefs from AACEncContext.
It resulted in scoefs being a NULL pointer when
search_for_quantizers() is called.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When decoding latm config, use the corresponding aac context and its
m4ac instead of using NULL and a local variable. This fixes decoding of
audio in MPEG TS from SBTVD (the Brazillian Digital TV Sytem), when
there is no extradata. This is the case when using the decoder with
gst-ffmpeg and a GStreamer mpegts demuxer.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 36864ac354)
Should an AVC-1 in MP4 stream not contain SPS or PPS NAL units,
this BSF is then unable to allocate an output buffer for the
modified stream. Warn that the resulting stream may be unplayable.
Fix roundup issue #2386.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 02dd3666c2)
When decoding latm config, use the corresponding aac context and its
m4ac instead of using NULL and a local variable. This fixes decoding of
audio in MPEG TS from SBTVD (the Brazillian Digital TV Sytem), when
there is no extradata. This is the case when using the decoder with
gst-ffmpeg and a GStreamer mpegts demuxer.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Should an AVC-1 in MP4 stream not contain SPS or PPS NAL units,
this BSF is then unable to allocate an output buffer for the
modified stream. Warn that the resulting stream may be unplayable.
Fix roundup issue #2386.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Currently it is always 4, but this change will allow it to be adjusted when
bandwidth-related features are added such as channel coupling, enhanced
channel coupling, and spectral extension.
(cherry picked from commit 53e35fd340)
Currently it is always 4, but this change will allow it to be adjusted when
bandwidth-related features are added such as channel coupling, enhanced
channel coupling, and spectral extension.
This moves setting the thread count to a minimum of 1 to
frame_thread_init(), allowing a value of zero to propagate
through to the codec if frame threading is not used. This
makes auto-threads work in libx264.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit ff1efc524c)
For intra codecs, ff_thread_finish_setup() is called before decoding starts
automatically. However, get_buffer can only be used before it's called, so
adding this requirement broke frame threading for them. Fixed by moving the
call until after get_buffer is finished.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit ad9791e12b)
This moves setting the thread count to a minimum of 1 to
frame_thread_init(), allowing a value of zero to propagate
through to the codec if frame threading is not used. This
makes auto-threads work in libx264.
Signed-off-by: Mans Rullgard <mans@mansr.com>
For intra codecs, ff_thread_finish_setup() is called before decoding starts
automatically. However, get_buffer can only be used before it's called, so
adding this requirement broke frame threading for them. Fixed by moving the
call until after get_buffer is finished.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The assembler emits literal pools too far from the load instructions,
so we must do it explicitly at a suitable location.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 8b454c352f)
The assembler emits literal pools too far from the load instructions,
so we must do it explicitly at a suitable location.
Signed-off-by: Mans Rullgard <mans@mansr.com>
decode_init sets bands[0] == 2, so this loop always sets the band table
index (k) to zero.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit a304def1dc)
This avoids the core substream extensions scan when the EXT_AUDIO_ID
field indicates no extensions or only unsupported extensions. The scan
is done only if the value of EXT_AUDIO_ID is unknown or indicates a
present XCh extension which we can decode.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 7e06e0ede3)
There is no need to expand to 16-bits. Just use memcpy() to copy the raw data.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 1108f8998c)
This also adds output buffer size checks for AUDIO and SILENCE block types.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 1574eff3d2)
