SDL_Init() is called on the event handler thread, as required by SDL in
Windows to avoid deadlocks as discovered by Roger Pack.
Fix trac ticket #1743 and #1744.
Add support for following pixel formats:
- AV_PIX_FMT_UYVY422
- AV_PIX_FMT_YUYV422
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Add ff_ prefix for internal API function.
Change type of param from int into enum AVCodecID as it is more specific.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Don't trust provided streams.
Return with error when stream count is not 1 or
provided stream is not an audio stream.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Current implementation didn't include duration of
last processed packet.
Device may return negative timestamps without
this correction.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Valgrind detects mem leak from XCreateGC.
Free it with XFreeGC.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
So far fbdev_enc device picked up first video stream and ignored others.
It is required to provide exactly one video stream now.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
So far pulse device picked up first audio stream and ignored others.
It is required to provide exactly one audio stream now.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Current implementation didn't include duration of
last processed packet.
Also remove access to st->cur_dts and replace with pkt->pts.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
This will avoid errors due to conflicting declarations
with linux kernels prior to 2.6.30.
Reviewed-by: Lukasz M <lukasz.m.luki@gmail.com>
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
Move common fbdev dec/enc for separate file.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Rename existing fbdev.c to make it a more meaningful name.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Error check should be done by checking negative value, not non-zero.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
In particular, fix punctuation in docs and make option help messages
grammatically consistent.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
fbdev->data was allocated with size fbdev->fixinfo.smem_len, release data
in fbdev_read_close() using the same size.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
This make name of the file more specific
as there is also encoder implementation.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
With some (buggy) drivers, the VIDIOC_G_STD ioctl returns a std_id that cannot
be matched with any of the enumerated v4l2_standard structures (for example
std_id = 0 or std_id = 0xffffff). Do not fail when we reach the end of the
enumeration without a valid match.
Fixes ticket #2370
Note: This commit message has been modified by Giorgio Vazzana, the original
commit message was:
"Fixed regression for mandatory VIDIOC_ENUMSTD support by v4l2"
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In particular, print the standard supported by the selected input.
Additionally, use PRIx64 everywhere when printing standards.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cb0244daaca83ab666798818f74f5181bf6bc387':
bktr: Changed a missed occurrance of open into avpriv_open
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add one copy of the function into each of the libraries, similarly
to what we do for log2_tab. When using static libs, only one
copy of the file_open.o object file gets included, while when
using shared libraries, each of them get a copy of its own.
This fixes DLL builds with a statically linked C runtime, where
each DLL effectively has got its own instance of the C runtime,
where file descriptors can't be shared across runtimes.
On systems not using msvcrt, the function is not duplicated.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '7950e519bb094897f957b9a9531cc60ba46cbc91':
Disable deprecation warnings for cases where a replacement is available
Conflicts:
libavcodec/avpacket.c
libavcodec/pthread.c
libavcodec/utils.c
libavdevice/v4l2.c
libavfilter/avfiltergraph.c
libavfilter/buffersrc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
for the n0=0 case there are multiple solutions and different
platforms pick different ones
This should reduce the issues with fate and the timefilter test
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
avconv uses private and internal fields from libavformat, we thus must
match the layout even of the fields marked non public.
Otherwise ffmpegs libavformat could not be used as a dropin replacement
on debian/ubuntu
The current soname of libavformat was not part of any release nor are any
fields marked public moved thus in theory
no installed shared lib ABI breakage should occur. Still the need for this
change is unfortunate and chilling.
If you installed shared libs from a recent development version of libavformat
that is more recent than the last release. You probably want to check or rebuild
applications that linked to it.
minor versions of avformat & avdevice are bumped to allow detecting this
as both use the updated struct
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add function avfilter_graph_parse_ptr() and favor it in place of
avfilter_graph_parse(), which will be restored with the old/Libav
signature at the next bump.
If HAVE_INCOMPATIBLE_LIBAV_API is enabled it will use the
Libav-compatible signature for avfilter_graph_parse().
At the next major bump the current implementation of
avfilter_graph_parse() should be dropped in favor of the Libav/old
implementation.
Should address trac ticket #2672.
Based on the work of Jeff Moguillansky <Jeff.Moguillansky@am.sony.com>.
See thread:
Subject: [FFmpeg-devel] x11 output device for libavdevice
Date: Wed, 10 Apr 2013 23:10:47 +0000
Also disable it by default since it looks currently buggy. The
usefulness of such library is mostly limited to backward compatibility
with very old devices.
* commit 'b3ea76624ad1baab0b6bcc13f3f856be2f958110':
vf_aspect: use the name 's' for the pointer to the private context
Remove commented-out debug #define cruft
Conflicts:
libavcodec/4xm.c
libavcodec/dvdsubdec.c
libavcodec/ituh263dec.c
libavcodec/mpeg12.c
libavfilter/avfilter.c
libavfilter/vf_aspect.c
libavfilter/vf_fieldorder.c
libavformat/rtmpproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is consistent with the rest of the file and makes listing of
emulated formats possible when ffmpeg is compiled with libv4l2.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
An input channel could have been previously set with another application, like
v4l2-ctl, so if no input channel is specified use the previosly selected one.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Our previous release (1.1) contained a version 54 libavdevice
and this version here is not ABI compatible thus a bump is
needed
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The current code returned a period=0, resulting in identical pts for all frames
after time-filtering. This is because AV_TIME_BASE_Q={1, AV_TIME_BASE} and
not {AV_TIME_BASE, 1}. With this patch the correct period in microseconds is computed.
struct buff_data contains a pointer to struct video_data, so passing the
file descriptor again is redundant.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In particular:
1) save errno before it (possibly) gets overwritten by other calls
2) do not forget to enqueue the buffer again in case of error
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This will avoid the possibility that we dequeue more buffers than we
have obtained from the v4l2 driver.
Fixes ticket #1570
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that fps and other values are estimated correctly,
the probesize also is intended to limit disk/protocol reads which
does not apply to lavfi inputs at all.
Fixes Ticket1051
Something similar could be usefull to other input devices
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Generally speaking, there are two types of v4l2 devices [1]:
1) devices that support a standard, like PAL or NTFS (tv cards, for example). For
this class of devices the framerate is fixed by the standard (for example PAL uses
25 fps) and the v4l2 driver cannot usually negotiate a different framerate (unless
it can skip frames on the driver side, to save I/O bandwidth).
2) devices for which the notion of standard does not make sense (webcams, for example).
For these devices it is usually possibile to request a desidered framerate.
In either case, the desidered frame rate can be requested when the VIDIOC_G_PARM
ioctl returns the V4L2_CAP_TIMEPERFRAME flag in the capability field.
Currently the code does not check for V4L2_CAP_TIMEPERFRAME and supports only the
second category of devices, returning a time per frame of 0/0 for devices in the
first group that do not permit to negotiate the framerate.
This patch adds support to read the correct framerate in all cases.
[1] http://linuxtv.org/downloads/v4l-dvb-apis/standard.html
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Since the user is expected to choose the standard by name (with -standard
option), add the possibility to list all the supported standards.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Because libavdevice/v4l2 is a demuxer, it makes sense to look for
decoders instead of encoders when listing the formats supported by the
device.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Make device_try_init() return an error value, and allow to properly
report errors which are not due to a wrong pixel/codec configuration.
In particular, report intelligible feedback in case of busy device.
* commit '90cfc084e3e6d37ab88fc96a95f0401d8e8b4cd1':
avpacket: free side data in av_free_packet().
v4l2: do not assert on a value received from outside of Libav
v4l2: set the average framerate instead of codec timebase.
Conflicts:
libavcodec/avpacket.c
libavdevice/v4l2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The function find_things() in configure is confused by component
registration calls as part of multiline macros defining combined
component registration. Coalesce those macros into one line to
work around the issue.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Handling DirectShow events prevents infinite loops when there is an error in
the graph, such as a device being disconnected. This makes it possible for
dshow to return an error to the caller and run the cleanup code.
Based on patch by Don Moir <donmoir@comcast.net>.
Successfully opening a device altered the ret variable, making the function
not cleanup properly and return an incorrect value for errors that happened
afterwards.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This change requires the user to specify min and max value, and makes
possible to prevent the user to set AV_{SAMPLE,PIX}_FMT_NONE if
forbidden.
Add required ifdeffery in case of mixed libraries, when libavutil is
updated but not the other libraries.
This is a followup of 08d0969c14.
Use the i64 field rather than the string value. Using a string to set a
default sample/pixel format is weird, also the new interface is more
consistent with the rest of the API.
This is technically an API break, but hopefully there are no applications
using this feature outside of FFmpeg. In order to save backward
compatibility with mixed libraries in case libavutil is updated but not
the other libraries, some ifdeffery hacks are added.
Note that the version check is only performed when class->version != 0,
since if it is not defined then we assume that no version was defined and
the class is not affected by the change.
We will luckily get rid of the hack at the next major bump.
Move the NO_DSHOW_STRSAFE macro definition in front of the dshow.h
system header inclusion.
This excludes the usage of the STRSAFE functions consistently.
Further background on this can be found in the commit message of
revision 05ee0db1 where the #define was initially introduced.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Allow to specify a filename where to put the filtergraph description.
This is useful to override limitations or glitches of particular shell
environments, and allows a level of indirection for specifying
filtergraphs.
This commit introduces a new AVPacket side data type:
AV_PKT_DATA_STRINGS_METADATA. Its main goal is to provide a way to
transmit the metadata from the AVFilterBufferRef up to the AVFrame. This
is at the moment "only" useful for lavfi input from libavdevice:
lavd/lavfi only outputs packets, and the metadata from the buffer ref
kept in its context needs to be transmitted from the packet to the frame
by the decoders. The buffer ref can be destroyed at any time (along with
the metadata), and a duplication of the AVPacket needs to duplicate the
metadata as well, so the choice of using the side data to store them was
selected.
Making sure lavd/lavfi raises the metadata is useful to allow tools like
ffprobe to access the filters metadata (it is at the moment the only
way); ffprobe will now automatically show the AVFrame metadata in any
customizable output format for users. API users will also be able to
access the AVFrame->metadata pointer the same way ffprobe does
(av_frame_get_metadata).
All the changes are done in this single commit to avoid some memory
leaks: for instances, the changes in lavfi/avcodec.c are meant to
duplicate the metadata from the buffer ref into the AVFrame. Unless we
have an internal way of freeing the AVFrame->metadata automatically, it
will leak in most of the user apps. To fix this problem, we introduce
AVCodecContext->metadata and link avctx->metadata to the current
frame->metadata and free it at each decode frame call (and in the codec
closing callback for the last one). But doing this also means to update
the way the tiff decoder already handles the AVFrame->metadata (it's the
only one decoder with frame metadata at the moment), by making sure it
is not trying to free a pointer already freed by the lavc internals.
The lavfi/avcodec.c buffer ref code is based on an old Thomas Kühnel
work, the rest of the code belongs to the commit author.
Signed-off-by: Thomas Kühnel <kuehnelth@googlemail.com>
Signed-off-by: Clément Bœsch <ubitux@gmail.com>
* qatar/master:
lavu,lavd: do not use av_pix_fmt_descriptors directly.
Conflicts:
libavutil/imgutils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
af_resample: avoid conversion of identical sample formats for 1 channel
avcodec: allow either planar or interleaved sample format when encoding mono
adpcmenc: ensure calls to adpcm_ima_compress_sample() are in the right order
timefilter: De-doxygenize normal code comments and drop silly ones
gxf: Include the right header for the avpriv_frame_rate_tab declaration
Conflicts:
libavcodec/adpcmenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
yuv4mpeg: return proper error codes.
Give all anonymously typedeffed structs in headers a name
fate: Add parseutils test
parseutils-test: Drop random colors from parsing test
vf_pad/scale: use double precision for aspect ratios.
build: error on variable-length arrays
ppc: swscale: rework yuv2planeX_altivec()
ppc: fmtconvert: kill VLA in float_to_int16_interleave_altivec()
x86: dsputil: kill VLA in gmc_mmx()
libspeexenc: Updated commentary to reflect recent changes
libspeexenc: Add an option for enabling DTX
doc/APIchanges: fill in missing dates and hashes.
lavr: bump major to 1 and declare it stable.
lavr: change the type of the data buffers to uint8_t**.
lavc: deprecate the audio resampling API.
Conflicts:
cmdutils.h
configure
doc/APIchanges
ffplay.c
libavcodec/dwt.h
libavcodec/libspeexenc.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavformat/asf.h
tests/fate/libavutil.mak
tests/ref/fate/parseutils
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously the device was returning EOF when the first sink was ending,
with the current change the device will continue to return frames until
all the sinks are EOF, which seems the most expected behavior.
WINBOOL is MinGW-specific, and since both MSVC and MinGW
have BOOL, use that instead.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd58dd4b5b5d31cfd4092e38a5f2c894eee2ab078':
avopt: Store defaults for AV_OPT_TYPE_FLAGS in the i64 union member
Conflicts:
libavcodec/libvpxenc.c
libavcodec/options_table.h
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '124134e42455763b28cc346fed1d07017a76e84e':
avopt: Store defaults for AV_OPT_TYPE_CONST in the i64 union member
Conflicts:
libavcodec/aacenc.c
libavcodec/libopenjpegenc.c
libavcodec/options_table.h
libavdevice/bktr.c
libavdevice/v4l2.c
libavdevice/x11grab.c
libavfilter/af_amix.c
libavfilter/vf_drawtext.c
libavformat/movenc.c
libavformat/options_table.h
libavutil/opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The cpia video decoder is intended to be used with the v4l2 demuxer.
There are some small changes to the v4l2 demuxer to support the
variable frame length of the format.
Fixes ticket #1537
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Based on patch by rogerdpack <rogerpack2005@gmail.com>
Tested-by: Roger Pack <rogerdpack2@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
