* commit '668e16a0dd1ff56d4beeff5c658d8a2a08dbfac8':
h264: on reference overflow, reset the reference count to 0, not 1.
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e671d3ad6cd7fe1d02e9b35b889a25d8c059fce9':
h264: do not copy ref count/ref2frm when updating per-frame context
flvdec: Check the return value of a malloc
Conflicts:
libavformat/flvdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is a regression introduced from the h264/mpegvideo split
Fixes out of array reads
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, only extend edges on-demand when the motion vector actually
crosses the visible decoded area using ff_emulated_edge_mc(). This
changes decoding time for cathedral from 8.722sec to 8.706sec, i.e.
0.2% faster overall. More generally (VP8 uses this also), low-motion
content gets significant speed improvements, whereas high-motion content
tends to decode in approximately the same time.
Signed-off-by: Martin Storsjö <martin@martin.st>
These functions are mostly H264-specific (the only other user I can
spot is bink), and this allows us to special-case some functionality
for H264. Also remove the 16-bit-coeff with >8bpp versions (unused)
and merge the duplicate 32-bit-coeff for >8bpp (identical).
Signed-off-by: Martin Storsjö <martin@martin.st>
The non-intra-pcm branch in hl_decode_mb (simple, 8bpp) goes from 700
to 672 cycles, and the complete loop of decode_mb_cabac and hl_decode_mb
(in the decode_slice loop) goes from 1759 to 1733 cycles on the clip
tested (cathedral), i.e. almost 30 cycles per mb faster.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Not all hwaccels implement all codecs, so using one single list for
multiple such codecs means some codecs will be represented in the list,
even though they don't actually handle that codec. Copying specific
lists in each codec fixes that.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, only extend edges on-demand when the motion vector actually
crosses the visible decoded area using ff_emulated_edge_mc(). This
changes decoding time for cathedral from 8.722sec to 8.706sec, i.e.
0.2% faster overall. More generally (VP8 uses this also), low-motion
content gets significant speed improvements, whereas high-motion content
tends to decode in approximately the same time.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, keep them in the bitstream buffer until we read them verbatim,
this saves a memcpy() and a subsequent clearing of the target buffer.
decode_cabac+decode_mb for a sample file (CAPM3_Sony_D.jsv) goes from
6121.4 to 6095.5 cycles, i.e. 26 cycles faster.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some applications do not like that.
Fixes VDA
Reduces noise for VDPAU
Tested-by: Guillaume POIRIER <poirierg@gmail.com>
Tested-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Writing into uninitialized hw surfaces is not supported and triggers an assert inside avpriv_color_frame
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Most of the changes are just trivial are just trivial replacements of
fields from MpegEncContext with equivalent fields in H264Context.
Everything in h264* other than h264.c are those trivial changes.
The nontrivial parts are:
1) extracting a simplified version of the frame management code from
mpegvideo.c. We don't need last/next_picture anymore, since h264 uses
its own more complex system already and those were set only to appease
the mpegvideo parts.
2) some tables that need to be allocated/freed in appropriate places.
3) hwaccels -- mostly trivial replacements.
for dxva, the draw_horiz_band() call is moved from
ff_dxva2_common_end_frame() to per-codec end_frame() callbacks,
because it's now different for h264 and MpegEncContext-based
decoders.
4) svq3 -- it does not use h264 complex reference system, so I just
added some very simplistic frame management instead and dropped the
use of ff_h264_frame_start(). Because of this I also had to move some
initialization code to svq3.
Additional fixes for chroma format and bit depth changes by
Janne Grunau <janne-libav@jannau.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Init code in that if statement goes down from 26716 cycles to 26047
cycles, i.e. the removal of the clear_blocks and smaller memcpy()
together save around 670 cycles.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
These functions are mostly H264-specific (the only other user I can
spot is bink), and this allows us to special-case some functionality
for H264. Also remove the 16-bit-coeff with >8bpp versions (unused)
and merge the duplicate 32-bit-coeff for >8bpp (identical).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '35685a3c2a1ec09f3c62dcfc4368fe9e92bcddf6':
dsputil: Move ff_shrink* function declarations to separate header
dsputil: Move ff_svq3 function declarations to a separate header
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f81c37e40fe3236d54da12aef9cdba48ba70ec31':
vf_delogo: fix an uninitialized read.
h264: remove obsolete comment.
mpegvideo: remove some unused variables from Picture.
utvideoenc/v410enc: do not set AVFrame.reference.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The existing checks are insufficient to detect a pixel format
changes in case of some damaged streams.
Fixes inconsistency and later out of array accesses
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '96753bd00d6d4046db6818c0aadc21bf2a11d77b':
dsputil: x86: Correct the number of registers used in put_no_rnd_pixels16_l2
dsputil: add missing HAVE_YASM guard
hwaccel: do not offer unsupported pixel formats
vdpau: add missing pixel format for H.264
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The sh4 optimizations are removed, because the code is
100% identical to the C code, so it is unlikely to
provide any real practical benefit.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Without any correctly decoded slices, there can be no frame.
Fixes out of array reads
Found-by: Rafaël Carré
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
ref_list is constructed from other fields per slice when needed, so do
not copy it for both frame and slice threading.
default_ref_list is constructed per frame and still needs to be copied
to per-slice contexts for slice threading, but a copy is not needed for
frame threading.
Fixes out of array reads
Regression probably since allowing pixel format changes or a related commit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If the motion vector is at a subpixel position, we need 3 pixels below
the motion vector's wholepel position available, not 2, since the MC
filter is a sixtap filter for the hpel position, and then a bilin filter
for the qpel position.
This patch fixes highly irreproducible (0.1%) fate failures in frame 2
and 4 of h264-conformance-cama2_vtc_b (e.g. first P-frame, first field,
last line of MB x=40,y=2 and second field and last lines of MBs x=39-40,
y=3). These used pre-loopfilter instead of post-loopfilter data because
the await_progress() waited for one line too little in that field, and
the motion vector of these particular MBs happened to align exactly to a
position where that demonstrates the bug.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If the motion vector is at a subpixel position, we need 3 pixels below
the motion vector's wholepel position available, not 2, since the MC
filter is a sixtap filter for the hpel position, and then a bilin filter
for the qpel position.
This patch fixes highly irreproducible (0.1%) fate failures in frame 2
and 4 of h264-conformance-cama2_vtc_b (e.g. first P-frame, first field,
last line of MB x=40,y=2 and second field and last lines of MBs x=39-40,
y=3). These used pre-loopfilter instead of post-loopfilter data because
the await_progress() waited for one line too little in that field, and
the motion vector of these particular MBs happened to align exactly to a
position where that demonstrates the bug.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'd8c772de53d29afb1bada88afa859fce8489c668':
nutdec: Always return a value from nut_read_timestamp()
configure: Make warnings from -Wreturn-type fatal errors
x86: ABS2: port to cpuflags
vdpau: Remove av_unused attribute from function declaration
h264: fix ff_generate_sliding_window_mmcos() prototype.
Conflicts:
configure
libavformat/nutdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Clobbering these tables will temporarily clobber the template used
as a basis for other threads to start decoding from. If the other
decoding thread updates from the template right at that moment,
subsequent threads will get invalid (or, usually, none at all) mmco
tables. This leads to invalid reference lists and subsequent decode
failures.
Therefore, instead, decode the mmco tables only for the first slice in
a field or frame. For other slices, decode the bits and ensure they
are identical to the mmco tables in the first slice, but don't ever
clobber the context state. This prevents other threads from using a
clobbered/invalid template as starting point for decoding, and thus
fixes decoding in these cases.
This fixes occasional (~1%) failures of h264-conformance-mr1_bt_a with
frame-multithreading enabled.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Clobbering these tables will temporarily clobber the template used
as a basis for other threads to start decoding from. If the other
decoding thread updates from the template right at that moment,
subsequent threads will get invalid (or, usually, none at all) mmco
tables. This leads to invalid reference lists and subsequent decode
failures.
Therefore, instead, decode the mmco tables only for the first slice in
a field or frame. For other slices, decode the bits and ensure they
are identical to the mmco tables in the first slice, but don't ever
clobber the context state. This prevents other threads from using a
clobbered/invalid template as starting point for decoding, and thus
fixes decoding in these cases.
This fixes occasional (~1%) failures of h264-conformance-mr1_bt_a with
frame-multithreading enabled.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes null pointer dereference later, since if this function failed,
a positive return value was returned to the caller.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
cmdutils: update copyright year to 2013
h264: check SPS entries directly to detect pixel format changes
forgotten changelogs for 9_beta2
Conflicts:
Changelog
cmdutils.c
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Comparing AVCodecContext.pix_fmt against the get_pixel_format() return
value has the side effect of calling the get_format() callback on each
slice. Users of the callback will probably handle hardware accelerator
initialization in the callback.
Comparing AVCodecContext.pix_fmt against the get_pixel_format() return
value has the side effect of calling the get_format() callback on each
slice. Users of the callback will probably handle hardware accelerator
initialization in the callback.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Move some functions from dsputil. The idea is that videodsp contains
functions that are useful for a large and varied set of video decoders.
Currently, it contains emulated_edge_mc() and prefetch().
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'f1d8763a02b5fce9a7d9789e049d74a45b15e1e8':
mpegvideo: allocate scratch buffers after linesize is known
Conflicts:
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Since we can't know which stride a custom get_buffer() implementation is
going to use we have to allocate this scratch buffers after the linesize
is known. It was pretty safe for 8 bit per pixel pixel formats since we
always allocated memory for up to 16 bits per pixel. It broke hoever
with cmdutis.c's alloc_buffer() and high pixel bit depth since it
allocated larger edges than mpegvideo expected.
Fixes fuzzed sample nasa-8s2.ts_s244342.
* commit '61c6eef5456f2bc8b1dc49a0a759c975551cea29':
h264: prevent decoding of slice NALs in extradata
doxy: Clarify what avpriv_set_pts_info does
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is not posible to call get_buffer during frame-mt codec
initialization. Libavformat might pass huge amounts of data as
extradata after parsing broken files. The 'extradata' for the fuzzed
sample sample_varPAR_s5374_r001-02.avi is 2.8M large and contains
multiple slices.
* commit '072be3e8969f24113d599444be4d6a0ed04a6602':
h264: set parameters from SPS whenever it changes
asyncts: cosmetics: reindent
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes rare race condition leading to null pointer dereferences.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0b300daad2f5cb59a7c06dde5ac701685e6edf16':
h264: error out on unset current_picture_ptr for h->current_slice > 0
avprobe: report per stream bit rate if set by the decoder
aac: avoid a memcpy in sbr_qmf_analysis
Conflicts:
avprobe.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9d46eaec7a90bd8f5cd9e45398c6d17804182320':
build: The FLAC encoder also depends on the flacdsp code
img2: K&R formatting cosmetics
h264: check context state before decoding slice data partitions
flashsv: make sure data for zlib priming is available
Conflicts:
libavcodec/Makefile
libavformat/img2.c
libavformat/img2dec.c
libavformat/img2enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6e5cdf26281945ddea3aaf5eca4d127791f23ca8':
h264: check ref_count validity for num_ref_idx_active_override_flag
h264: add missing new line to log message
dcadec: skip QMF on unused channels
wavenc: write fact chunk sample count at the correct file position
riff: do not add empty metadata tags in INFO chunk
Conflicts:
libavcodec/dcadec.c
libavcodec/h264.c
libavformat/riff.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This does not seem to have an effect currently. Fate-h264 passes with
THREADS=1..16 and both threading types as before. It fixes however a
segfault during error resilience with my adaptive-frame-mt patchset.
A picture in use during error resilience gets realloced in another
thread in the fuzzed sample sample_varPAR.avi_s226019.
* commit '5ae72f54532960cb9eae82a1c9e8d505106c022b':
flashsv: check for keyframe before using differential coding
h264: enable low delay only if no delayed frames were seen
x86: fix build without inline asm
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Dropping frames is undesirable but that is the only way by which the
decoder could return to low delay mode. Instead emit a warning and
continue with delayed frames.
Fixes a crash in fuzzed sample nasa-8s2.ts_s20033 caused by a larger
than expected has_b_frames value. Low delay keeps getting re-enabled
from a presumely broken SPS.
CC: libav-stable@libav.org
s->mb_x is reset to zero a couple of lines above. It does not make
sense to call ff_er_add_slice() with 0 as endx when the end of the
macroblock row was reached. Fixes unnecessary and counterproductive
error resilience in https://bugzilla.libav.org/show_bug.cgi?id=394.
CC: libav-stable@libav.org
* qatar/master:
mingw/cygwin: Stop adding -fno-common to gcc CFLAGS
Restructure av_log_missing_feature message
rtp: Support packetization/depacketization of opus
file: Set the return value type for lseek to int64_t.
ppc: fix Altivec build with old compilers
build: add LTO support for PGI compiler
build: add -Mdse to PGI optimisation flags
rtpenc_vp8: Update the packetizer to the latest spec version
rtpdec_vp8: Make the depacketizer implement the latest spec draft
doc: allow building with old texi2html versions
avutil: skip old_pix_fmts.h since it is just a list
Conflicts:
libavcodec/aacdec.c
libavcodec/h264.c
libavcodec/ppc/fmtconvert_altivec.c
libavcodec/utils.c
libavformat/file.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some invocations include a verb in the log message, others do not. Yet
av_log_missing_feature expects callers to provide a verb. Change the
function to include a verb instead and update the callers accordingly.
The result is a more natural function API and correct English in the
function invocations.
* qatar/master:
h264: avoid stuck buffer pointer in decode_nal_units
mpeg12: fix the semantics of the int* parameter of decode()
Conflicts:
libavcodec/mpeg12.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When decode_nal_units() previously encountered a NAL_END_SEQUENCE,
and there are some junk bytes left in the input buffer, but no start codes,
buf_index gets stuck 3 bytes before the end of the buffer.
This can trigger an infinite loop in the caller code, eg. in
try_decode_trame(), as avcodec_decode_video() then keeps returning zeroes,
with 3 bytes of the input packet still available.
With this change, the remaining bytes are skipped so the whole packet gets
consumed.
CC:libav-stable@libav.org
Signed-off-by: Jindřich Makovička <makovick@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '0db2d94280e260af5f3ad7993c5a6357462f17c9':
dsputil: workaround __VA_ARGS__ missing tokenization for MSVC
configure: add section for libc-specific hacks
build: disable ranlib on mingw
parser: Don't use pc as context for av_dlog
h264: Remove an assert on current_picture_ptr being null
Conflicts:
configure
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is possible in various error paths as well as gap handling
that this has already been allocated. It is not clear why that
would be a problem with the current code, thus disable the
assert to avoid a common assert failure when asserts are enabled.
Signed-off-by: Martin Storsjö <martin@martin.st>
The h264_vdpau decoder crashed if output colorspace was not 8-bit 420.
Add a check to error out instead (current hardware does not support
other colorspaces, so successful decoding is not possible).
Check implemented at a different place by michael, thus blame for bugs goes to michael
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The h264_vdpau decoder crashed if output colorspace was not 8-bit 420.
Add a check to error out instead (current hardware does not support
other colorspaces, so successful decoding is not possible).
Signed-off-by: Martin Storsjö <martin@martin.st>
It is possible in various error pathes as well as gap handling
that this has already been allocated. Its not clear why that
would be a problem with the current code, thus disable the
assert to avoid common assert failure when asserts are enabled.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
v410dec: Implement explode mode support
zerocodec: fix direct rendering.
wav: init st to NULL to avoid a false-positive warning.
wavpack: set bits_per_raw_sample for S32 samples to properly identify 24-bit
h264: refactor NAL decode loop
RTMPTE protocol support
RTMPE protocol support
rtmp: Add ff_rtmp_calc_digest_pos()
rtmp: Rename rtmp_calc_digest to ff_rtmp_calc_digest and make it global
swscale: add missing HAVE_INLINE_ASM check.
lavfi: place x86 inline assembly under HAVE_INLINE_ASM.
vc1: Add a test for interlaced field pictures
swscale: Mark all init functions as av_cold
swscale: x86: Drop pointless _mmx suffix from filenames
lavf: use conditional notation for default codec in muxer declarations.
swscale: place inline assembly bilinear scaler under HAVE_INLINE_ASM.
dsputil: ppc: cosmetics: pretty-print
dsputil: x86: add SHUFFLE_MASK_W macro
configure: respect CC_O setting in check_cc
Conflicts:
Changelog
configure
libavcodec/v410dec.c
libavcodec/zerocodec.c
libavformat/asfenc.c
libavformat/version.h
libswscale/utils.c
libswscale/x86/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Write out the NAL decoding loops in full so that they are easier
to parse for a preprocessor without it having to be aware of macros
or other such things in C code.
This also makes the code more readable.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
qdm2: remove broken and disabled dump_context() debug function
x86: h264_intrapred: use newly introduced SPLAT* and PSHUFLW macros
x86inc: add SPLATB_LOAD, SPLATB_REG, PSHUFLW macros
x86inc: modify ALIGN to not generate long nops on i586
x86: h264_intrapred: port to cpuflag macros
avplay: update input filter pointer when the filtergraph is reset.
avconv: fix parsing of -force_key_frames option.
h264: use templates to avoid excessive inlining
xtea: Make the count parameter match the documentation
blowfish: Make the count parameter match the documentation
mpegvideo: Don't use ff_mspel_motion() for vc1
xtea: invert branch and loop precedence
blowfish: invert branch and loop precedence
flvdec: optionally trust the metadata
avconv: Set audio filter time base to the sample rate
vp8: Add ifdef guards around the sse2 loopfilter in the sse2slow branch too
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/h264.c
libavcodec/mpegvideo_common.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Instead of inlining everything into ff_h264_hl_decode_mb(), use
explicit templating to create versions of the called functions
with constant parameters filled in. This greatly speeds up
compilation of h264.c and reduces the code size without any
measurable impact on performance.
Compilation time for h264.c on an i7 goes from 30s to 5.5s.
Code size is reduced by 430kB.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
cosmetics: Consistently use C-style comments with multiple inclusion guards
anm: fix a few Doxygen comments
misc typo and wording fixes
attributes: add av_noreturn
attributes: drop pointless define guards
configure: do not disable av_always_inline with --enable-small
flvdec: initial stream switch support
avplay: fix write on freed memory for rawvideo
snow: remove a VLA used for edge emulation
x86: lavfi: fix gradfun/yadif build with mmx/sse disabled
snow: remove the runs[] VLA.
snow: Check mallocs at init
flacdec: remove redundant setting of avctx->sample_fmt
Conflicts:
ffplay.c
libavcodec/h264.c
libavcodec/snow.c
libavcodec/snow.h
libavcodec/snowdec.c
libavcodec/snowenc.c
libavformat/flvdec.c
libavutil/attributes.h
tools/patcheck
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Below fixes the maximum reference count check for second reference list in
non-B frames. There is nothing to prohibit full (field sized) reference
list in this case as far as I can tell, and this fixes several syntax-test
files here (this is a regression caused when this check was made more
stringent by
http://git.videolan.org/?p=ffmpeg.git;a=commit;h=dc9ce40069bde3d28f8d0b3e5bd733ae255fecb5)
Probably a silly corner case seldom seen irl, but thought I'd pass along
in case there was interest in correcting the check.
---------------
h264: Fix maximum reference count check for non-b frames; full range is
technically ok
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is based on:
commit 30f515091c
Author: Mans Rullgard <mans@mansr.com>
h264: allow cropping to AVCodecContext.width/height
The above commit is not taken as is as its buggy (incorrect handling of
the interlaced case) and didnt apply cleanly.
Fixes ticket156
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: allow cropping to AVCodecContext.width/height
mov: set AVCodecContext.width/height for h264
iac: generate codec tables as they are supposed to be
indeo4: handle frame type 1 properly
lavu: change versioning script to include all av* prefixed symbols
Conflicts:
libavcodec/h264.c
libavutil/libavutil.v
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Override the frame size from the SPS with AVCodecContext values
if the latter specify a size smaller by less than one macroblock.
This is required for correct cropping of MOV files from Canon cameras.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This fixes out of global array reads.
The alternative solutions of checking the index or modifying the VLC tables
to prevent the index going outside are each about 1-2 cpu cyclces slower
per coded 4x4 block.
The alternative of padding the global tables directly is more ugly and
moving them to the context should benefit cache locality.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpeg12: fixed parsing in some mpeg2 streams
Add SMPTE240M transfer characteristics flag.
mpegts: Some additional HDMV types and reg descriptors for mpegts
motionpixels: Clip YUV values after applying a gradient.
jpeg: handle progressive in second field of interlaced.
ituh263dec: Implement enough of Annex O (scalability) to fix a FPE.
h263: more strictly forbid frame size changes with frame-mt.
h264: additional protection against unsupported size/bitdepth changes.
tta: prevents overflows for 32bit integers in header.
configure: remove malloc_aligned.
vp8: update frame size changes on thread context switches.
snowdsp: explicitily state instruction size.
wmall: fix reconstructing audio with uncoded channels
WMAL cosmetics: fix indentation
gitignore: add Win32 library suffixes
Conflicts:
configure
libavcodec/h263dec.c
libavcodec/h264.c
libavcodec/ituh263dec.c
libavcodec/mjpegdec.c
libavcodec/wmalosslessdec.c
libavcodec/x86/snowdsp_mmx.c
libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
During failure conditions ff_h264_decode_init() leaks memory
allocated for nal units. Found via valgrind.
Valgrind traces: http://pastebin.com/GqTqxs8T
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: Factorize declaration of mb_sizes array.
vsrc_buffer: when no frame is available, return an error instead of segfaulting.
configure: add dl to frei0r extralibs.
dsputil x86: use SSE float instruction instead of SSE2 integer equivalent
dsputil x86: remove deprecated parameter from scalarproduct_int16 prototype
vp8dsp x86: perform rounding shift with a single instruction
fate: add BMP tests.
swscale: handle complete dimensions for monoblack/white.
aacenc: Mark deinterleave_input_samples argument as const.
vf_unsharp: Mark readonly variable as const.
h264: fix 4:2:2 PCM-macroblocks decoding
Conflicts:
configure
libavcodec/h264.h
libavcodec/x86/dsputil_mmx.c
libavfilter/vf_unsharp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: drop ff_h264_ prefix from static function ff_h264_decode_rbsp_trailing()
h264: Make ff_h264_decode_end() static, it is not used externally.
output-example: K&R formatting cosmetics, comment spelling fixes
avf: make the example output the proper message
avf: fix audio writing in the output-example
mov: don't overwrite existing indexes.
lzw: fix potential integer overflow.
truemotion: forbid invalid VLC bitsizes and token values.
truemotion2: handle out-of-frame motion vectors through edge extension.
configure: Check for a different SDL function
Conflicts:
configure
doc/examples/muxing.c
libavcodec/truemotion2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
