Replace mpz_random by mpz_urandomb with a random state initialization in
order to improve the randomness.
Signed-off-by: Martin Storsjö <martin@martin.st>
Not all compilers support ssize_t (MSVC doesn't), and none of these
variables need to be larger than 32 bit.
Signed-off-by: Martin Storsjö <martin@martin.st>
Specifies how the server verifies client SWF files before allowing the
files to connect to an application. Verifying SWF files is a security
measure that prevents someone from creating their own SWF files that can
attempt to stream your resources.
Signed-off-by: Martin Storsjö <martin@martin.st>
The _checkbw calls were changed to use transactionId 0 in commit
82613564 so that servers would not return _result/_error about it.
While this is the strict interpretation of the spec, there are
servers that return _error about it, even if transactionId was 0.
The latest version of EvoStream Media Server (the commercial version
of crtmpserver) behaves properly as described, i.e. returning an
_error normally but not returning anything when using transactionId
0. The latest version of crtmpserver (right now at least) doesn't
behave like this though, it returns an error even if transactionId
was 0.
There are also other servers that return errors even if transactionId
is set to 0. Therefore set a proper transaction id so that the invoke
can be tracked and the error properly ignored instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
These are normally initialized to AV_NOPTS_VALUE at the start
of avformat_find_stream_info, but if a new stream is found while
this function is running (e.g. like in mpegts), the newly added
AVStreams didn't have these values properly initalized, leading
to avformat_find_stream_info terminating too soon (when the
first timestamps are far from 0).
Signed-off-by: Martin Storsjö <martin@martin.st>
Some files' embedded art seems to have the mimetype 'image/JPG' instead
of 'image/jpg'. Libav fails to parse those because it matches
case-sensitively.
Use av_strncasecmp() to fix this behaviour.
Signed-off-by: Mohammad Alsaleh <msal@tormail.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This adds a function to retrieve the number of entries in a
dictionary and updates the places directly accessing what should
be an opaque struct to use this new function instead.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The condition is trivially true, but keeping the assert() is
sensible to avoid FFM_HEADER_SIZE ever getting out of sync with
the actual code.
Signed-off-by: Mans Rullgard <mans@mansr.com>
id3 v2.2 uses image format ("JPG","PNG") instead of mimetypes.
Currently, the attached picture is skipped because the format string
does not match a known picture mimetype.
This patch fixes this behaviour.
Signed-off-by: Mohammad Alsaleh <msal@tormail.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
When streaming live streams using the Akamai, Edgecast or Limelight CDN,
players cannot simply connect to the live stream. Instead, they have to
subscribe to it, by sending an FC Subscribe call to the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
At this place, the normal way of initializing a struct works
fine, there's no need for a struct literal.
Signed-off-by: Martin Storsjö <martin@martin.st>
According to its description, it is supposed to be the LCM of all the
frame durations. The usability of such a thing is vanishingly small,
especially since we cannot determine it with any amount of reliability.
Therefore get rid of it after the next bump.
Replace it with the average framerate where it makes sense.
FATE results for the wtv and xmv demux tests change. In the wtv case
this is caused by the file being corrupted (or possibly badly cut) and
containing invalid timestamps. This results in lavf estimating the
framerate wrong and making up wrong frame durations.
In the xmv case the file contains pts jumps, so again the estimated
framerate is far from anything sane and lavf again makes up different
frame durations.
In some other tests lavf starts making up frame durations from different
frame.
AVPacket.duration is mostly made up and thus completely useless, this is
especially true for video streams.
Therefore use dts difference for framerate estimation and
the max_analyze_duration check.
The asyncts test now needs -analyzeduration, because the default is 5
seconds and the audio stream in the sample appears at ~10 seconds.
Useful in cases where a significant analyzeduration is
still needed, while minimizing buffering before output.
An example is processing low-latency streams where all
media types won't necessarily come in if the
analyzeduration is small.
Additional changes by Josh Allmann <joshua.allmann@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Previously, we returned any error code except AVERROR_EOF to the
caller - only if AVERROR_EOF or 0 was returned, we proceeded to
the next segment.
With some setups of web servers, using Connection: close in https
and GnuTLS, we don't get a clean error code at the end of segments.
In those cases, just proceed to the next segment.
Tested-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
OpenSSL returns 0 when the peer has closed the connection. GnuTLS
doesn't return that though, but returns
GNUTLS_E_UNEXPECTED_PACKET_LENGTH if the connection simply is closed
without a clean close notify packet.
Tested-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
It should be possible to specify usernames in http requests containing
urlencoded characters. This patch adds support for decoding the auth
strings.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Without this patch a user a bit absent-minded may not notice that
the connection doesn't work because the port is missing.
Signed-off-by: Martin Storsjö <martin@martin.st>
Without this patch a user a bit absent-minded may not notice that
the connection doesn't work because the port is missing.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure these calls are removed by dead code elimination
even if optimization is disabled. This fixes building without
crypto libraries without optimization.
Signed-off-by: Martin Storsjö <martin@martin.st>
If using a different sample rate or number of channels, use a dynamic
payload type instead, where the parameters are passed in the SDP.
G722 is a special case where the normal rules don't apply.
Signed-off-by: Martin Storsjö <martin@martin.st>
If st is NULL, it means no 'fmt ' tag is found, but 'data' tag (which
needs a previous 'fmt ' tag to be parsed correctly and st initialized)
check will make sure st is never dereferenced in that case.
Fixes warning:
libavformat/wav.c: In function ‘wav_read_header’:
libavformat/wav.c:499:44: warning: ‘st’ may be used uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPE protocol implementation uses ffrtmpcrypt:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
Even if linking directly to getaddrinfo, use our version of
gai_strerror instead of the system's version. Microsoft explicitly
documents that their version of gai_strerror is thread-unsafe.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids warnings if there already exists a definition.
This is the case on windows, where the getaddrinfo isn't available
and linked to (and we use our fallbacks instead, which actually
try to use the proper getaddrinfo version if found at runtime),
but gai_strerror still exists as a define.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is useful if a proper getaddrinfo is loaded dynamically on
windows, while using the fallback implementation of gai_strerror.
Signed-off-by: Martin Storsjö <martin@martin.st>
We cannot do this in general since we could be reading
a file with B-frames while lacking an index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This allows future assumptions to be made without affecting non-intra files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The "ECs != 1 -> OP1a" assumption was wrong. Luckily, the file
that triggered that behavior had two ECs, not zero. Hence
distinguishing between them is simple in this case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes rare cases where OPAtom may be treated
as OP1a, causing all essence to be read into RAM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This matches the order used for the index table edit rate.
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Only return an error if memory allocation fails or error recognition is
set to explode. Otherwise just print an error message and continue
reading the file.
Also replace x>>av_log2(sizeof(..)) + 1 by x/sizeof(..). The +1 is
probably meant to emulate av_log2_ceil(sizeof(..)) in cases where ".."
is not a power of two.
This avoids creating new AVStreams for them when switching between
different variants of them, since we can handle changes between
different sample rates of nellymoser within the same stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
Mingw headers provide similar defines already (unconditional #defines,
without any #undef or #ifdef around it), while MSVC doesn't have
them.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fallback function is a non-static function, we shouldn't be
defining non-static functions outside of the proper ff/av prefix
namespaces.
This is especially important for a function like poll, which
other parties (other libraries, or executables linking these
libraries) also might provide similar but incompatible fallbacks for.
Signed-off-by: Martin Storsjö <martin@martin.st>
We need to include winsock2.h here, to make sure we have the
real pollfd struct definition, if one exists, before defining the
fallback poll function.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fds are unsigned integers in the windows definition of struct
sockfds. Due to this, the comparison if (fds[i].fd > n) was always
false.
Signed-off-by: Martin Storsjö <martin@martin.st>
io.h is required for open and _wopen, and fcntl.h is required for
the O_CREAT flag. On mingw, fcntl.h is included by os_support.h (and
the mingw fcntl.h includes io.h), but include it explicitly here
since this implementation requires it.
Also move the #undef open up. open must not be defined to ff_win32_open
while including the headers that declare the open function. On mingw,
this happened in os_support.h before open was redirected.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is included for the open/read/write/close functions. On
MSVC, where this header does not exist, the same functions
are provided by io.h, which is already included.
On windows, these functions are provided by io.h. Make sure
io.h is included if it exists, regardless of the setmode
function.
Signed-off-by: Martin Storsjö <martin@martin.st>
unistd.h used to be required for gethostname. On windows, gethostname
is provided by winsock2.h. Now network.h includes both unistd.h and
winsock2.h if they exist.
Signed-off-by: Martin Storsjö <martin@martin.st>
This gives you the proper v4 or v6 version of the "any address",
allowing receiving connections on any address on the machine.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since the errno.h values don't match the error codes that winsock
returns, map the winsock error codes to the errno ones, to make
sure explicit checks against AVERROR(x) match.
Signed-off-by: Martin Storsjö <martin@martin.st>
Apparently this include is needed on some systems for building the
poll fallback (for the timeval struct for select?), but it isn't
available on all systems. Thus only include it if it exists.
Signed-off-by: Martin Storsjö <martin@martin.st>
This heaader is required for close() for sockets in network
code. For winsock, the equivalent function is defined in the
winsock2.h header.
This avoids having the HAVE_UNISTD_H in all files dealing with
raw sockets.
Signed-off-by: Martin Storsjö <martin@martin.st>
On MSVC, gmtime returns NULL for values outside of their supported
range (and these show up in our fate test). This doesn't seem
to affect the actual fate test result.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently if a pattern is given we look for up to the fifth file name in
the sequence. This option sets that limit to an arbitrary number.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This adds the capability to start counting file number from an arbitrary
integer.
This includes a few lines of trivial code from FFmpeg codebase.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Also use ff_neterrno() instead of errno directly (which doesn't work
on windows), for getting the error code.
Signed-off-by: Martin Storsjö <martin@martin.st>
getnameinfo doesn't set errno on failure, it returns an error code,
which should be handled by gai_strerror instead of the normal
strerror.
Signed-off-by: Martin Storsjö <martin@martin.st>
Rtmpt is effectively half duplex - the server can't return any
data unless we send a request (to which the server responds). If
we don't have any data to send currently, and the server didn't
return any data either, wait a little before doing the next request.
This avoids busy looping with idle posts with empty replies, while
waiting for more data from the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add a new option 'rtmp_flush_interval' that allows specifying the
number of packets to write before sending it off as a HTTP request.
This is mostly relevant for RTMPT - for plain RTMP, it only controls
how often we check the socket for incoming packets, which shouldn't
affect the performance in any noticeable way.
Signed-off-by: Martin Storsjö <martin@martin.st>
This seems to be the correct mode to send, according to the
original RTSP RFC, and matches the method RECORD which is
sent later when starting to send data.
Darwin Streaming Server works fine with either of them.
Signed-off-by: Martin Storsjö <martin@martin.st>
This requires all NAL units to fit within single RTP packets. It
doesn't change the actual packetization for packets that fit, but
errors out and gives a helpful hint if the NAL units would have to
be split, and signals the right packetization mode in the SDP.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPT protocol implementation uses rtmphttp:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This can happen if doing a new request using the same socket,
but the new request failed, which clears the urlcontext.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add spaces around operators, fix brace placement and whitespace to
match K&R style, vertically align code, remove redundant != 0 and
convert x == 0 into !x, drop useless braces.
Signed-off-by: Martin Storsjö <martin@martin.st>
This can easily happen when the caller is using a custom AVIOContext.
Behave as if the filename was an empty string in this case.
CC: libav-stable@libav.org
This makes sure all incoming packets are read and handled (and reacted
to) while sending an FLV stream over RTMP to a server. If there were
enough incoming data to fill the TCP buffers, this could potentially
make things block at unexpected places. For the upcoming RTMPT support,
we need to consume all incoming data before we can send the next
request.
Signed-off-by: Martin Storsjö <martin@martin.st>
While there is no reason for starting a frame with anything else
than a Mode A packet, some senders seem to consistently use Mode B
packets for everything. This fixes depacketization of such streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
This factorizes existing code into a new function gen_buffer_time(),
which generates the client buffer time message and sends it to the
server.
Signed-off-by: Martin Storsjö <martin@martin.st>
Allow using connection parameters in order to append arbitrary
AMF data like "B:1 S:authMe O:1 NN:code:1.23 NS:flag:ok O:0" to the
Connect message. You can pass these parameters through the -rtmp_conn
option.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds the avoption mpegts_flags and converts the existing
resend_headers option into a flag, keeping the old option as
fallback for now.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This isn't required any longer, when the mpegts muxer uses it
as a proper chained muxer.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This removes the dependency on adts.c internals, and simplifies
adding other packetization formats.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes issues with opening http urls that have authentication
or redirects, introduced in commit e999b641.
Signed-off-by: Martin Storsjö <martin@martin.st>
avisynth is a non-unicode application and cannot accept UTF-8
characters. Therefore, the input filename should be converted to
the correct code page that it expects.
Signed-off-by: Martin Storsjö <martin@martin.st>
Introduce ff_http_do_new_request(), a new function which sends a new
HTTP request, reusing the existing connection to the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add a new AVOption 'multiple_requests', which indicates if we want
to use persistent connections (ie. Connection: keep-alive).
Signed-off-by: Martin Storsjö <martin@martin.st>
Some systems abuse the static payload types 35 or 36 (which
according to IANA are unassigned) for H264.
Signed-off-by: Martin Storsjö <martin@martin.st>
If an URLContext is passed in, its ownership is given to this
function, and is either owned by the returned AVFormatContext
on a successful return, or freed on failure.
Signed-off-by: Martin Storsjö <martin@martin.st>
The sample_rate variable is used for checks for audio format
changes at the end of the function.
This fixes cases where the sample rate was set from the codec
id by flv_set_audio_codec (as for nellymoser 8 kHz/16 kHz),
so the value set to last_sample_rate wasn't equal to sample_rate
at this point. This caused the demuxer otherwise reports a spurious
change to 5512 Hz and back to the correct one.
Updating channels in the same way is only done for consistency.
Currently, flv_set_audio_codec doesn't update that value.
Signed-off-by: Martin Storsjö <martin@martin.st>
tcp_shutdown() isn't needed at the moment, but is added for
consistency to explain how the function is supposed to be used.
Signed-off-by: Martin Storsjö <martin@martin.st>
If using the new -rtmp_app and -rtmp_playpath parameters,
one can in many cases set the main url to just rtmp://server/.
If the trailing slash is omitted, path is a string of zero length,
and using path+1 will end up reading uninitialized data.
Signed-off-by: Martin Storsjö <martin@martin.st>
According to the behaviour of librtmp, it is recommended to send this
message to the server after receiving the 'onBWDone' callback in order
to do bandwidth checking and improve compatibility with some servers.
The strtol() interface makes it difficult to use with
const-qualified pointers. With this change, although
the const is still lost, the compiler does not warn
about it.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Add/fix spacing, split long lines, align assignments where suitable.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Split long comments, move long comments at the end of lines to
separate lines above, fix vertical alignment, fix up comment style
(unify trailing dots - comments had a mix of 2, 3 or 4 dots, where
it would be just as good without them at all).
Signed-off-by: Martin Storsjö <martin@martin.st>
It is worth keeping instead of removing, in case reading this
bit becomes necessary at some later point.
Signed-off-by: Martin Storsjö <martin@martin.st>
Skip to parse fields for additional independent substreams and its
associated dependent substreams since libavcodec's E-AC-3 decoder does not
support them yet.
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
This fixes crashes, where the demuxer could return 0 even
if the returned AVPacket isn't initialized at all. This
could happen if running into EOF or running out of probesize
with non-seekable sources.
Signed-off-by: Martin Storsjö <martin@martin.st>
The new incremental parser doesn't always clear prev_pkt,
however the packet queue is cleared when seeking. Which leads
to a use-after-free.
Verified using Valgrind.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Reduces the amount of upfront data required for cluster parsing
thus decreasing latency on seek and startup.
The change in the seek-lavf_mkv FATE test is due to incremental
parsing no longer reading as much data as the old parser and
thus not having that additional data to generate index entries
based on keyframes. Index entries are added correctly as the
file is parsed.
All FATE tests pass and Chrome has been using this patch for ~6
months without issue.
Currently incremental parsing is not supported for files with
SSA tracks since they require merging packets between clusters.
In this case the code falls back to non-incremental parsing.
Signed-off-by: Aaron Colwell <acolwell@chromium.org>
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The mpegts demuxer reads 5 KB at startup just for discovering
the packet size. Since the default avio buffer size is 32 KB,
the seek back to the start will in most cases be within the
avio buffer, and will in most cases succeed even if the actual
protocol isn't seekable.
This makes the demuxer startup faster/with less data when
reading data from a non-seekable input, by not skipping
the first few KB.
If it fails, don't warn if the protocol isn't seekable, making
it behave as before in the failure case.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fix this warning:
libavformat/aviobuf.c:663:20: warning: assignment discards qualifiers from pointer target type
Although this is a public header, it should remain source and
binary compatible.
Signed-off-by: Mans Rullgard <mans@mansr.com>
If a video track specifies a zero frame rate (invalid but occurs),
this results in a division by zero and subsequent undefined conversion
to integer. Setting the default duration from the frame rate only
if the latter is greater than zero avoids such problems.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This option is the stream identifier to play or to publish.
Sometimes the URL parser cannot determine the correct
playpath automatically, so it must be given explicitly
using this option (ie. -rtmp_playpath).
Signed-off-by: Martin Storsjö <martin@martin.st>
This option is the name of application to connect on the RTMP server.
Sometimes the URL parser cannot determine the app name automatically,
so it must be given explicitly using this option (ie. -rtmp_app).
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead of allocating over the original, free first. MOVStreamContext
is zero initialized so no double free will occur. Same style as other
fixes for the same problem in this file.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
During error conditions matroska_parse_block may exit without
freeing the memory allocated for laces.
Found via valgrind: http://pastebin.com/E54k8QFU
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Share the formerly internal write_packet with the hinter and move the
fragment flush logic to the user facing one since it is not concerned
about movtrack-only streams.
Fixes bug #263
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids exposing a dummy AVStream which won't get any data
and which will make avformat_find_stream_info wait for info about
this stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
Searching for packet markers doesn't make sense for this use case,
where packets are fed one at a time to the demuxer.
This fixes playing back streams that have packets not starting
with the 0x82, 0x00, 0x00 marker.
Signed-off-by: Martin Storsjö <martin@martin.st>
It can take a long time before subtitles or data streams show up,
so we shouldn't wait for those before assuming we have all info
for streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add missing trailing commas, break long codec_tag lines and
add spaces in codec_tag declarations.
Signed-off-by: Martin Storsjö <martin@martin.st>
The audio codecs property is composed by all values except
SUPPORT_SND_INTEL (0x0008) and SUPPORT_SND_UNUSED (0x0010) which are
unused.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The previous condition of 0 page size was wrong,
that would disable the mechanism for all frames at
a start of a page, thus some keyframes still would not
get their own granule.
The real problem is that header packets must not be flushed,
but they have (and must have) 0 granule and thus would
be detected as keyframes.
Add a separate parameter to mark header packets.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
When set, if an Ogg stream buffer has enough data, a page is made
instead of filling maximum-size pages. Using smaller pages results
smaller seek intervals at the expense of higher container overhead.
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Version from vqa header does not dictate which sound chunks may
appear in file.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
This patch allows the user to force flushing of all queued packets
by calling av_interleaved_write_frame() with pkt set to NULL.
Signed-off-by: Jindrich Makovicka <jindrich.makovicka@nangu.tv>
Signed-off-by: Martin Storsjö <martin@martin.st>
This isn't exactly equivalent with the earlier code for codecs
other than H264 and VC1, but those are two only codecs supported
by this codepath anyway, and it simplifies it a bit.
Signed-off-by: Martin Storsjö <martin@martin.st>
Takes encoder delay into account by comparing first the coded page
duration with the calculated page duration. Handles last packet duration
if needed, also by comparing coded duration with calculated duration.
Also does better handling of timestamp generation for packets in the
first page for streamed ogg files where the start time is not
necessarily zero.
