Use the MAX_URL_SIZE define where applicable. Increase buffer
sizes for all buffers that need to fit a long pathname - buffers
that need to fit only the hostname (and other short strings, but
not the pathname - such as "headers" in http_connect) are kept
at 1024 bytes for now.
Also increase the max line length in http_read_header, since it
might need to contain a full url for Location: redirects.
Signed-off-by: Martin Storsjö <martin@martin.st>
Anonymous typedef structs prevent forward declaration, this
change gives the AVIOContext and AVIOInterruptCB structures
a name. These structures are now in line with other common
structures such as AVFormatContext and AVCodecContext.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This packetization scheme simply places the full packets into the
RTP packet without any extra header bytes.
Signed-off-by: Martin Storsjö <martin@martin.st>
Additional safety in case a special ogg stream is crafted
with the proper number of
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This occurs with fuzzed mpeg-ts files. set_codec_from_probe_data() is
called with a zeroed AVProbeData since no packet made through for
specific stream.
Frames described by this grouping are the starter of a closed or
an open GOP.
This is useful for open GOP of H.264 stream which is not described
by sync sample atom.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Support Matroska native formatting.
On demuxing prepend a Frame container atom (32bit big endian encoded
frame size and 'icpf' string).
On muxing remove it.
This fixes stream copy from a format that already has incompatible
codec tags set. The chained ismv muxer exports this same codec tag
list, so set it on this one as well, to allow the caller (and
lavf common code) to set them correctly.
Signed-off-by: Martin Storsjö <martin@martin.st>
A quite widespread pattern in the demuxer is read a 32bit unsigned
integer and then loop till this value is reached.
Checking for EOF prevents pathological situations.
The compiler fails to figure out that enc->codec_type can only
have 3 different values.
Thus when an if/else is encountered it triggers on the possibility
of the else case has not initialized the flags variable.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
It would have been done anyway in the av_dict_set() call.
This simplifies the code and avoid a warning because of assigning a
const string from ff_id3v1_genre_str to a non-const variable.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fix near infinite loop in stsd parsing.
Bug found by: Diana Elena Muscalu
The size is unsigned according the specification.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Avoid a near infinite loop.
Issue discovered by cosminamironesei.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Based on the code by:
Peter Belkner <pbelkner@snafu.de>,
Michael Niedermayer <michaelni@gmx.at>,
Clément Bœsch <clement.boesch@smartjog.com>,
Reimar Döffinger <Reimar.Doeffinger@gmx.de>, and
Tobias Rapp <t.rapp@noa-audio.com>
Alex Converse <alex.converse@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is consistent with stdio and is what we want to do in all cases.
Fixes a bug in the voc muxer which didn't flush in write_trailer()
previously. This is the cause of the change in the test results.
Windows CE doesn't have neither mkdir nor _mkdir officially (only
CreateDirectoryW), but mingw32ce has compat wrappers with these names
(declared in io.h since direct.h is unavailable).
Signed-off-by: Martin Storsjö <martin@martin.st>
This muxer splits the output from the ismv muxer into individual
files, in realtime.
The same can also be done by the standalone tool ismindex, but this
muxer is needed for doing it in realtime (especially for live
streams that need extra handling for updating the lookahead fields
in the fragment headers).
Using this muxer, one can deliver live smooth streaming from a
normal static file web server. (Using ismindex, one can deliver
premade smooth streaming files from a static file web server,
or prepare files for serving with IIS.)
Signed-off-by: Martin Storsjö <martin@martin.st>
Everything written with this bitstream writer is 8/16 bit units
(except for a pair of 4 bit values), so using a bitstream writer
isn't necessary.
Signed-off-by: Martin Storsjö <martin@martin.st>
Generalize writing of any number of qtables. Don't manually write
16 bit values in two separate calls.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently the size header of the generated DHT section is
incorrect, making the mjpeg decoder just skip it. Since the
written huffman tables are the default ones, this failure had
gone undetected.
Signed-off-by: Martin Storsjö <martin@martin.st>
If regularly parsing new chan atoms (as in rtpdec_qt), but the
chan atoms don't actually contain any channel layout, don't reset
the value that the caller has filled in (by guessing).
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes crashes when called from rtpdec_qt, where
AVFormatContext->pb is null, a crash present since 3bab7cd128.
Signed-off-by: Martin Storsjö <martin@martin.st>
This enables replacing the -l and -L flags used to specify the
just-built libraries when linking the tools and shared libs with
non-standard syntaxes. System library flags are already handled
by the filtering mechanism in configure.
Signed-off-by: Mans Rullgard <mans@mansr.com>
In order to send or receive a stream FCPublish, FCSubscribe and _checkbw
are completely optional and often not implemented. releaseStream over a
non-existen stream might report an error instead of being silent.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Replace mpz_random by mpz_urandomb with a random state initialization in
order to improve the randomness.
Signed-off-by: Martin Storsjö <martin@martin.st>
Not all compilers support ssize_t (MSVC doesn't), and none of these
variables need to be larger than 32 bit.
Signed-off-by: Martin Storsjö <martin@martin.st>
Specifies how the server verifies client SWF files before allowing the
files to connect to an application. Verifying SWF files is a security
measure that prevents someone from creating their own SWF files that can
attempt to stream your resources.
Signed-off-by: Martin Storsjö <martin@martin.st>
The _checkbw calls were changed to use transactionId 0 in commit
82613564 so that servers would not return _result/_error about it.
While this is the strict interpretation of the spec, there are
servers that return _error about it, even if transactionId was 0.
The latest version of EvoStream Media Server (the commercial version
of crtmpserver) behaves properly as described, i.e. returning an
_error normally but not returning anything when using transactionId
0. The latest version of crtmpserver (right now at least) doesn't
behave like this though, it returns an error even if transactionId
was 0.
There are also other servers that return errors even if transactionId
is set to 0. Therefore set a proper transaction id so that the invoke
can be tracked and the error properly ignored instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
These are normally initialized to AV_NOPTS_VALUE at the start
of avformat_find_stream_info, but if a new stream is found while
this function is running (e.g. like in mpegts), the newly added
AVStreams didn't have these values properly initalized, leading
to avformat_find_stream_info terminating too soon (when the
first timestamps are far from 0).
Signed-off-by: Martin Storsjö <martin@martin.st>
Some files' embedded art seems to have the mimetype 'image/JPG' instead
of 'image/jpg'. Libav fails to parse those because it matches
case-sensitively.
Use av_strncasecmp() to fix this behaviour.
Signed-off-by: Mohammad Alsaleh <msal@tormail.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This adds a function to retrieve the number of entries in a
dictionary and updates the places directly accessing what should
be an opaque struct to use this new function instead.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The condition is trivially true, but keeping the assert() is
sensible to avoid FFM_HEADER_SIZE ever getting out of sync with
the actual code.
Signed-off-by: Mans Rullgard <mans@mansr.com>
id3 v2.2 uses image format ("JPG","PNG") instead of mimetypes.
Currently, the attached picture is skipped because the format string
does not match a known picture mimetype.
This patch fixes this behaviour.
Signed-off-by: Mohammad Alsaleh <msal@tormail.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
When streaming live streams using the Akamai, Edgecast or Limelight CDN,
players cannot simply connect to the live stream. Instead, they have to
subscribe to it, by sending an FC Subscribe call to the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
At this place, the normal way of initializing a struct works
fine, there's no need for a struct literal.
Signed-off-by: Martin Storsjö <martin@martin.st>
According to its description, it is supposed to be the LCM of all the
frame durations. The usability of such a thing is vanishingly small,
especially since we cannot determine it with any amount of reliability.
Therefore get rid of it after the next bump.
Replace it with the average framerate where it makes sense.
FATE results for the wtv and xmv demux tests change. In the wtv case
this is caused by the file being corrupted (or possibly badly cut) and
containing invalid timestamps. This results in lavf estimating the
framerate wrong and making up wrong frame durations.
In the xmv case the file contains pts jumps, so again the estimated
framerate is far from anything sane and lavf again makes up different
frame durations.
In some other tests lavf starts making up frame durations from different
frame.
AVPacket.duration is mostly made up and thus completely useless, this is
especially true for video streams.
Therefore use dts difference for framerate estimation and
the max_analyze_duration check.
The asyncts test now needs -analyzeduration, because the default is 5
seconds and the audio stream in the sample appears at ~10 seconds.
Useful in cases where a significant analyzeduration is
still needed, while minimizing buffering before output.
An example is processing low-latency streams where all
media types won't necessarily come in if the
analyzeduration is small.
Additional changes by Josh Allmann <joshua.allmann@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Previously, we returned any error code except AVERROR_EOF to the
caller - only if AVERROR_EOF or 0 was returned, we proceeded to
the next segment.
With some setups of web servers, using Connection: close in https
and GnuTLS, we don't get a clean error code at the end of segments.
In those cases, just proceed to the next segment.
Tested-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
OpenSSL returns 0 when the peer has closed the connection. GnuTLS
doesn't return that though, but returns
GNUTLS_E_UNEXPECTED_PACKET_LENGTH if the connection simply is closed
without a clean close notify packet.
Tested-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
It should be possible to specify usernames in http requests containing
urlencoded characters. This patch adds support for decoding the auth
strings.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Without this patch a user a bit absent-minded may not notice that
the connection doesn't work because the port is missing.
Signed-off-by: Martin Storsjö <martin@martin.st>
Without this patch a user a bit absent-minded may not notice that
the connection doesn't work because the port is missing.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure these calls are removed by dead code elimination
even if optimization is disabled. This fixes building without
crypto libraries without optimization.
Signed-off-by: Martin Storsjö <martin@martin.st>
If using a different sample rate or number of channels, use a dynamic
payload type instead, where the parameters are passed in the SDP.
G722 is a special case where the normal rules don't apply.
Signed-off-by: Martin Storsjö <martin@martin.st>
If st is NULL, it means no 'fmt ' tag is found, but 'data' tag (which
needs a previous 'fmt ' tag to be parsed correctly and st initialized)
check will make sure st is never dereferenced in that case.
Fixes warning:
libavformat/wav.c: In function ‘wav_read_header’:
libavformat/wav.c:499:44: warning: ‘st’ may be used uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPE protocol implementation uses ffrtmpcrypt:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
Even if linking directly to getaddrinfo, use our version of
gai_strerror instead of the system's version. Microsoft explicitly
documents that their version of gai_strerror is thread-unsafe.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids warnings if there already exists a definition.
This is the case on windows, where the getaddrinfo isn't available
and linked to (and we use our fallbacks instead, which actually
try to use the proper getaddrinfo version if found at runtime),
but gai_strerror still exists as a define.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is useful if a proper getaddrinfo is loaded dynamically on
windows, while using the fallback implementation of gai_strerror.
Signed-off-by: Martin Storsjö <martin@martin.st>
We cannot do this in general since we could be reading
a file with B-frames while lacking an index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This allows future assumptions to be made without affecting non-intra files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The "ECs != 1 -> OP1a" assumption was wrong. Luckily, the file
that triggered that behavior had two ECs, not zero. Hence
distinguishing between them is simple in this case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes rare cases where OPAtom may be treated
as OP1a, causing all essence to be read into RAM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This matches the order used for the index table edit rate.
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Only return an error if memory allocation fails or error recognition is
set to explode. Otherwise just print an error message and continue
reading the file.
Also replace x>>av_log2(sizeof(..)) + 1 by x/sizeof(..). The +1 is
probably meant to emulate av_log2_ceil(sizeof(..)) in cases where ".."
is not a power of two.
This avoids creating new AVStreams for them when switching between
different variants of them, since we can handle changes between
different sample rates of nellymoser within the same stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
Mingw headers provide similar defines already (unconditional #defines,
without any #undef or #ifdef around it), while MSVC doesn't have
them.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fallback function is a non-static function, we shouldn't be
defining non-static functions outside of the proper ff/av prefix
namespaces.
This is especially important for a function like poll, which
other parties (other libraries, or executables linking these
libraries) also might provide similar but incompatible fallbacks for.
Signed-off-by: Martin Storsjö <martin@martin.st>
We need to include winsock2.h here, to make sure we have the
real pollfd struct definition, if one exists, before defining the
fallback poll function.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fds are unsigned integers in the windows definition of struct
sockfds. Due to this, the comparison if (fds[i].fd > n) was always
false.
Signed-off-by: Martin Storsjö <martin@martin.st>
io.h is required for open and _wopen, and fcntl.h is required for
the O_CREAT flag. On mingw, fcntl.h is included by os_support.h (and
the mingw fcntl.h includes io.h), but include it explicitly here
since this implementation requires it.
Also move the #undef open up. open must not be defined to ff_win32_open
while including the headers that declare the open function. On mingw,
this happened in os_support.h before open was redirected.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is included for the open/read/write/close functions. On
MSVC, where this header does not exist, the same functions
are provided by io.h, which is already included.
On windows, these functions are provided by io.h. Make sure
io.h is included if it exists, regardless of the setmode
function.
Signed-off-by: Martin Storsjö <martin@martin.st>
unistd.h used to be required for gethostname. On windows, gethostname
is provided by winsock2.h. Now network.h includes both unistd.h and
winsock2.h if they exist.
Signed-off-by: Martin Storsjö <martin@martin.st>
This gives you the proper v4 or v6 version of the "any address",
allowing receiving connections on any address on the machine.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since the errno.h values don't match the error codes that winsock
returns, map the winsock error codes to the errno ones, to make
sure explicit checks against AVERROR(x) match.
Signed-off-by: Martin Storsjö <martin@martin.st>
Apparently this include is needed on some systems for building the
poll fallback (for the timeval struct for select?), but it isn't
available on all systems. Thus only include it if it exists.
Signed-off-by: Martin Storsjö <martin@martin.st>
This heaader is required for close() for sockets in network
code. For winsock, the equivalent function is defined in the
winsock2.h header.
This avoids having the HAVE_UNISTD_H in all files dealing with
raw sockets.
Signed-off-by: Martin Storsjö <martin@martin.st>
On MSVC, gmtime returns NULL for values outside of their supported
range (and these show up in our fate test). This doesn't seem
to affect the actual fate test result.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently if a pattern is given we look for up to the fifth file name in
the sequence. This option sets that limit to an arbitrary number.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This adds the capability to start counting file number from an arbitrary
integer.
This includes a few lines of trivial code from FFmpeg codebase.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Also use ff_neterrno() instead of errno directly (which doesn't work
on windows), for getting the error code.
Signed-off-by: Martin Storsjö <martin@martin.st>
getnameinfo doesn't set errno on failure, it returns an error code,
which should be handled by gai_strerror instead of the normal
strerror.
Signed-off-by: Martin Storsjö <martin@martin.st>
Rtmpt is effectively half duplex - the server can't return any
data unless we send a request (to which the server responds). If
we don't have any data to send currently, and the server didn't
return any data either, wait a little before doing the next request.
This avoids busy looping with idle posts with empty replies, while
waiting for more data from the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add a new option 'rtmp_flush_interval' that allows specifying the
number of packets to write before sending it off as a HTTP request.
This is mostly relevant for RTMPT - for plain RTMP, it only controls
how often we check the socket for incoming packets, which shouldn't
affect the performance in any noticeable way.
Signed-off-by: Martin Storsjö <martin@martin.st>
This seems to be the correct mode to send, according to the
original RTSP RFC, and matches the method RECORD which is
sent later when starting to send data.
Darwin Streaming Server works fine with either of them.
Signed-off-by: Martin Storsjö <martin@martin.st>
This requires all NAL units to fit within single RTP packets. It
doesn't change the actual packetization for packets that fit, but
errors out and gives a helpful hint if the NAL units would have to
be split, and signals the right packetization mode in the SDP.
Signed-off-by: Martin Storsjö <martin@martin.st>
