For the callable function (as opposed to the inline one):
C SSE SSE2 SSE4
Win32: 47 42 29 26
Win64: 30 33 25 23
The SSE version is neither compiled nor set for ARCH_X86_64, as the
inlinable function takes over.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
benchmarked on sandybridge x86_64:
1358232 decicycles in flac_lpc_32_c
1244575 decicycles in flac_lpc_32_sse4, James Almer's patch
650045 decicycles in flac_lpc_32_sse4, this patch
I haven't tested the edgecases such as odd block lengths
odd block length tested-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Should fix crashes or corrupt output on pre-SSE2 CPUs when they were
using SSE2-code (e.g. AMD Athlon XP 2400+ or Intel Pentium III) in
hfix or hvar single-edge (left/right) extension functions.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
9680 decicycles in loop_filter_v_88_16_c, 4193765 runs, 539 skips
9233 decicycles in loop_filter_h_88_16_c, 4193751 runs, 553 skips
1929 decicycles in ff_vp9_loop_filter_v_88_16_ssse3, 4194118 runs, 186 skips
2738 decicycles in ff_vp9_loop_filter_h_88_16_ssse3, 4193861 runs, 443 skips
5.978 → 5.417 overall decode time on ped1080p.webm (-threads 1)
Adding SSE2 support should be relatively trivial (just a matter of
changing the pshufb [mask_mix] with something else), patch welcome.
Introduce 2 additional registers for stride3 and mstride3 to allow
direct accesses (lea drops).
3931 → 3827 decicycles in ff_vp9_loop_filter_v_16_16_ssse3
Also uses defines to clarify the code.
Before this patch, we explicitly modify rsp, which isn't necessarily
universally acceptable, since the space under the stack pointer might
be modified in things like signal handlers. Therefore, use an explicit
register to hold the stack pointer relative to the bottom of the stack
(i.e. rsp). This will also clear out valgrind errors about the use of
uninitialized data that started occurring after the idct16x16/ssse3
optimizations were first merged.
Fixes these errors with nasm:
libavcodec/x86/lossless_videodsp.asm:86: error: invalid combination of opcode and operands
libavcodec/x86/lossless_videodsp.asm:88: error: invalid combination of opcode and operands
I don't know whether movd or movq was meant, but either way
maskq vs. maskd must match the mov size.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
pavgb is an sse integer instruction, so the mmxext flag is enough
Signed-off-by: James Almer <jamrial@gmail.com>
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '46bacb5cc6169ff5e8e982495c4925467c1d8bb7':
x86: Consistently use cpu flag detection macros in places that still miss it
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b0be1ae792ac8bbfb0fc7b9b9cb39eaf0feb489b':
x86: avcodec: Add a bunch of missing #includes for av_cold
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Runtime of the full 32x32 idct goes from 2446 to 2441 cycles (intra) or
from 1425 to 1306 cycles (inter). Overall runtime is not significantly
affected.
Runtime of all IDCTs together goes from 3327 to 2473 cycles (intra, i.e.
~35% faster) or from 2312 to 1448 cycles (inter, i.e. ~60% faster). Total
decode time of ped1080p.webm goes from 8.086sec to 7.974sec (1.4% faster).
Sub-IDCTs will follow later. ped1080.webm goes from 9.295s to 8.191s
(13.5% faster). The IDCT itself goes from 4372 (intra) or 4337 (inter)
to 403 (intra) or 329 (inter) cycles for the DC-only form, 23755 (intra)
or 23723 (inter) to 3497 (intra) or 3607 (inter) cycles for the no-DC
form, which averages from 23393 (intra) or 16612 (inter) to 3449 (intra)
or 2392 (inter) for all 32x32s together, i.e. about ~7x faster (all
tests done on ped1080p.webm).
* commit 'a03a642d5ceb5f2f7c6ebbf56ff365dfbcdb65eb':
h264: do not use 422 functions for monochrome
See: 07abf13da4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Sub8x8 speed (w/o dc-only case) goes from ~750 cycles (inter) or ~735
cycles (intra) to ~415 cycles (inter) or ~430 cycles (intra). Average
overall 16x16 idct speed goes from ~635 cycles (inter) or ~720 cycles
(intra) to ~415 cycles (inter) or ~545 (intra) - all measurements done
using ped1080p.webm.
Currently only dc-only and full 16x16. Other subforms will follow in the
near future. Total decoding time of ped1080p.webm goes from 9.7 to 9.3
seconds. DC-only goes from 957 -> 131 cycles, and the full IDCT goes
from ~4050 to ~745 cycles.
The mmxext optimizations should be at least equally fast if available and
amd3dnow optimizations are being deprecated. Thus the former should
override the latter, not the other way around.
* qatar/master:
dsputil: x86: Move ff_inv_zigzag_direct16 table init to mpegvideo
If someone optimizes dct_quantize for non x86 SIMD, then this
probably needs to be reverted.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Original fix by one of these developers:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>
See 97962b2 / 72ca830
Personnal guess is Diego Biurrun.
* commit '458446acfa1441d283dacf9e6e545beb083b8bb0':
lavc: Edge emulation with dst/src linesize
Conflicts:
libavcodec/cavs.c
libavcodec/h264.c
libavcodec/hevc.c
libavcodec/mpegvideo_enc.c
libavcodec/mpegvideo_motion.c
libavcodec/rv34.c
libavcodec/svq3.c
libavcodec/vc1dec.c
libavcodec/videodsp.h
libavcodec/videodsp_template.c
libavcodec/vp3.c
libavcodec/vp8.c
libavcodec/wmv2.c
libavcodec/x86/videodsp.asm
libavcodec/x86/videodsp_init.c
Changes to the asm are not merged, they are left for volunteers or
in their absence for later.
The changes this merge introduces are reordering of the function
arguments
See: face578d56
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Originally written by Ronald S. Bultje <rsbultje@gmail.com> and
Clément Bœsch <u@pkh.me>
Further contributions by:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Allow supporting files for which the image stride is smaller than
the maximum block size + number of subpel mc taps, e.g. a 64x64 VP9
file or a 16x16 VP8 file with -fflags +emu_edge.
XvMC has long ago been superseded by newer acceleration APIs, such as
VDPAU, and few downstreams still support it. Furthermore XvMC is not
implemented within the hwaccel framework, but requires its own specific
code in the MPEG-1/2 decoder, which is a maintenance burden.
* commit '0338c396987c82b41d322630ea9712fe5f9561d6':
dsputil: Split off H.263 bits into their own H263DSPContext
Conflicts:
configure
libavcodec/mpegvideo.h
libavcodec/mpegvideo_enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
1789 decicycles in idct_idct_4x4_add_c, 262136 runs, 8 skips
1839 decicycles in idct_idct_4x4_add_c, 524270 runs, 18 skips
1864 decicycles in idct_idct_4x4_add_c, 1048548 runs, 28 skips
529 decicycles in ff_vp9_idct_idct_4x4_add_ssse3, 262138 runs, 6 skips
516 decicycles in ff_vp9_idct_idct_4x4_add_ssse3, 524282 runs, 6 skips
474 decicycles in ff_vp9_idct_idct_4x4_add_ssse3, 1048565 runs, 11 skips
(~3.9x faster)
7726 decicycles in idct_idct_8x8_add_c, 1048433 runs, 143 skips
7732 decicycles in idct_idct_8x8_add_c, 2096882 runs, 270 skips
7731 decicycles in idct_idct_8x8_add_c, 4193772 runs, 532 skips
1145 decicycles in ff_vp9_idct_idct_8x8_add_ssse3, 1048549 runs, 27 skips
1137 decicycles in ff_vp9_idct_idct_8x8_add_ssse3, 2097097 runs, 55 skips
1086 decicycles in ff_vp9_idct_idct_8x8_add_ssse3, 4194188 runs, 116 skips
(~7.1x faster)
Overall decode time before commit:
16.48s user 0.03s system 99% cpu 16.526 total
16.54s user 0.01s system 99% cpu 16.566 total
16.46s user 0.03s system 99% cpu 16.511 total
Overall decode time after commit:
16.34s user 0.02s system 99% cpu 16.378 total
16.28s user 0.02s system 99% cpu 16.315 total
16.32s user 0.03s system 99% cpu 16.366 total
Tested on i7 920 with 40s 1080p footage.
* commit 'e2b5b097898c9155f4bdff4d83cdc54d5eef6930':
x86: rv40dsp: Use PAVGB instruction macro where appropriate
Merged-by: Michael Niedermayer <michaelni@gmx.at>
There are instructions pavgb and pavgusb. Both instructions do the same
operation but they have different enconding. Pavgb exists in SSE (or
MMXEXT) instruction set and pavgusb exists in 3D-NOW instruction set.
livavcodec uses the macro PAVGB to select the proper instruction. However,
the function avg_pixels8_xy2 doesn't use this macro, it uses pavgb
directly.
As a consequence, the function avg_pixels8_xy2 crashes on AMD K6-2 and
K6-3 processors, because they have pavgusb, but not pavgb.
This bug seems to be introduced by commit
71155d7b41, "dsputil: x86: Convert mpeg4
qpel and dsputil avg to yasm"
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1700b4e678ed329611a16b20d11e64b7abda4839':
x86: vp8dsp: Split loopfilter code into a separate file
Conflicts:
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes overreads in HEVC
Fixes Ticket3070
Also fixed remaining issues from Ticket3075 and Ticket3076
Some lines of code taken from 0c5f839693da2276c2da23400f67a67be4ea0af1:libavcodec/x86/cabac.h
and 0c5f839693da2276c2da23400f67a67be4ea0af1:libavcodec/cabac_functions.h
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Don't use word-size multiplications if size == 2, and if we're using
SIMD instructions (size >= 8), complete leftover 4byte sets using movd,
not mov. Both of these changes lead to minor speedups.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
this might fix Ticket2999 as well as some fate clients
untested as the original patch submitter no longer has the environment to test
this should be reverted if it does not fix the issues
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Should fix crashes or corrupt output on pre-SSE2 CPUs when they were
using SSE2-code (e.g. AMD Athlon XP 2400+ or Intel Pentium III) in
hfix or hvar single-edge (left/right) extension functions.
Tested-by: Ingo Brückl <ib@wupperonline.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bbe4a6db44f0b55b424a5cc9d3e89cd88e250450':
x86inc: Utilize the shadow space on 64-bit Windows
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Store XMM6 and XMM7 in the shadow space in functions that
clobbers them. This way we don't have to adjust the stack
pointer as often, reducing the number of instructions as
well as code size.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '2ddb35b91131115c094d90e04031451023441b4d':
x86: dsputil: Separate ff_add_hfyu_median_prediction_cmov from dsputil_mmx
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '258414d0771845d20f646ffe4d4e60f22fba217c':
x86: fdct: Initialize optimized fdct implementations in the standard way
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows supporting files for which the image stride is smaller than
the max. block size + number of subpel mc taps, e.g. a 64x64 VP9 file
or a 16x16 VP8 file with -fflags +emu_edge.
The volatile is not required here, and prevents a miscompilation with GCC
4.8.1 when building on x86 with --cpu=i686
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Currently all uses of the emu edge code as well as the code itself
assume int linesize
changing some but not changing all would introduce a security issue
once all use this typedef a simple search and replace can be
done to switch them all to ptrdiff_t
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6369ba3c9cc74becfaad2a8882dff3dd3e7ae3c0':
x86: avcodec: Use convenience macros to check for CPU flags
Conflicts:
libavcodec/x86/dsputil_init.c
libavcodec/x86/hpeldsp_init.c
libavcodec/x86/motion_est.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Consistently use "cpu_flags" as variable/parameter name for CPU flags
Conflicts:
libavcodec/x86/dsputil_init.c
libavcodec/x86/h264dsp_init.c
libavcodec/x86/hpeldsp_init.c
libavcodec/x86/motion_est.c
libavcodec/x86/mpegvideo.c
libavcodec/x86/proresdsp_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6d8acf6a8fba4743eb56eabe72a741d1bbee3cb':
indeo: use a typedef for the mc function pointer
cabac: x86 version of get_cabac_bypass
aic: use chroma scan tables while decoding luma component in progressive mode
Conflicts:
libavcodec/aic.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The volatile is not required here, and prevents a miscompilation with GCC
4.8.1 when building on x86 with --cpu=i686
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It was previously declared as int.
Does not change fate results for x86.
Conflicts:
libavcodec/ppc/fmtconvert_altivec.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '245b76a108585b6fb52eebc2626c472d6fa530dc':
x86: dsputil: Split inline assembly from init code
Conflicts:
libavcodec/x86/dsputil_mmx.c
Note, the author attribution is left in place and not removed
as it is in the merged commit.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3d40c1ee742db5f13ebcf53c2d1fa4bf4f39bcd2':
x86: dsputil: Move TRANSPOSE4 macro to the only place it is used
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ed880050edf061b38d3e39e25657c59ad9108b27':
x86: dsputil: Group all assembly constants together in constants.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '87614667606b42476f9017d79faf12b45a0bd77c':
x86: dsputil: Move ff_pd assembly constants to the only place they are used
Conflicts:
libavcodec/x86/lpc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dc1b328d0df6e5ad5ff0ca4ae031e08466624f9c':
x86: hpeldsp: Only compile MMX hpeldsp code if MMX is enabled
Conflicts:
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9e5e76ef9ea803432ef2782a3f528c3f5bab621e':
x86: More specific ifdefs for dsputil/hpeldsp init functions
Conflicts:
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Sandybridge: 47 cycles
Having a loop counter is a 7 cycle gain.
Unrolling is another 7 cycle gain.
Working in reverse scan is another 6 cycles.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* commit 'bf7c3c6b157f7938578f964b62cffd5e504940be':
x86: dsputil: Move cavs and vc1-specific functions where they belong
Conflicts:
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '932806232108872655556100011fe369125805d3':
x86: dsputil: Move avg_pixels16_mmx() out of rnd_template.c
x86: dsputil: Move avg_pixels8_mmx() out of rnd_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9b3a04d30691e85b77e63f75f5f26a93c3a000cd':
x86: Move duplicated put_pixels{8|16}_mmx functions into their own file
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7f75f2f2bd692857c1c1ca7f414eb30ece3de93d':
ppc: Drop unnecessary ff_ name prefixes from static functions
x86: Drop unnecessary ff_ name prefixes from static functions
arm: Drop unnecessary ff_ name prefixes from static functions
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6b110d3a739c31602b59887ad65c67025df3f49d':
ppc: More consistent names for H.264 optimizations files
mpegaudiosp: More consistent names for ppc/x86 optimization files
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
x86: ac3dsp: Remove 3dnow version of ff_ac3_extract_exponents
Conflicts:
tests/fate/ac3.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The function requires increasing the fuzz factor for the ac3/eac3 encode
tests and even so makes fate fail. It only provides a slight encoding
speedup for legacy CPUs that do not support SS2. Thus its benefit is not
worth the trouble it creates and fixing it would be a waste of time.
* qatar/master:
x86: Move some conditional code around to avoid unused variable warnings
Conflicts:
libavcodec/x86/dsputil_mmx.c
libavfilter/x86/vf_yadif_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '78fa0bd0f7067868943c0899907e313414492426':
x86: cavs: Put mmx-specific code into its own init function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
233 to 105 cycles on Arrandale and Win64.
Replacing the multiplication by s_m[m] by a pand and a pxor with
appropriate vectors is slower. Unrolling is a 15 cycles win.
A SSE version was 4 cycles slower.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c46819f2299c73cd1bfa8ef04d08b0153a5699d3':
x86: Move constants to the only place where they are used
Conflicts:
libavcodec/x86/vp3dsp.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This way, the special IDCT permutations are no longer needed. This
is similar to how H264 does it, and removes the dsputil dependency
imposed by the scantable code.
Also remove the unused type == 0 cases from the plain C version
of the idct.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e027032fc6a49db5a4ce12fc3e09ffb86ff20522':
x86: dsputil: ff_h263_*_loop_filter declarations to a more suitable place
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a89c05500f68d94a0269e68bc522abfd420c5497':
x86: h264qpel: int --> ptrdiff_t for some line_size parameters
Conflicts:
libavcodec/x86/qpelbase.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The non-intra-pcm branch in hl_decode_mb (simple, 8bpp) goes from 700
to 672 cycles, and the complete loop of decode_mb_cabac and hl_decode_mb
(in the decode_slice loop) goes from 1759 to 1733 cycles on the clip
tested (cathedral), i.e. almost 30 cycles per mb faster.
Signed-off-by: Martin Storsjö <martin@martin.st>
This way, they can be shared between mpeg4qpel and h264qpel without
requiring either one to be compiled unconditionally.
Signed-off-by: Martin Storsjö <martin@martin.st>
From 312 to 89/68 (sse/sse2) cycles on Arrandale and Win64.
Sandybridge: 68/47 cycles.
Having a loop counter is a 7 cycle gain.
Unrolling is another 7 cycle gain.
Working in reverse scan is another 6 cycles.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Timing on Arrandale:
C SSE
Win32: 57 44
Win64: 47 38
Unrolling and not storing mask both save some cycles.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Timing on Arrandale:
C SSE
Win32: 57 44
Win64: 47 38
Unrolling and not storing mask both save some cycles.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e5c2794a7162e485eefd3133af5b98fd31386aeb':
x86: consistently use unaligned movs in the unaligned bswap
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This way, the special IDCT permutations are no longer needed. Bfin code
is disabled until someone updates it. This is similar to how H264 does
it, and removes the dsputil dependency imposed by the scantable code.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This way, they can be shared between mpeg4qpel and h264qpel without
requiring either one to be compiled unconditionally.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e8c52271c45ec27d783e74238dcfad0c2008731c':
Revert "Move H264/QPEL specific asm from dsputil.asm to h264_qpel_*.asm."
Conflicts:
libavcodec/x86/dsputil.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit f90ff772e7.
The code should be put back in h264_qpel_8bit.asm, but unfortunately
it is unconditionally used from dsputil_mmx.c since 71155d7.
* commit '845cfc92f908791714b8c4c8a49c91b8c64b685e':
x86: dsputil: Drop aliasing of ff_put_pixels8_mmx to ff_put_pixels8_mmxext
Conflicts:
libavcodec/x86/dsputil_mmx.c
Note, the commit message is wrong, there are no mmxext instructions as
claimed in the function. The change should do no harm though
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '096cc11ec102701a18951b4f0437d609081ca1dd':
x86: vc1dsp: Move ff_avg_vc1_mspel_mc00_mmxext out of dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The external assembly function uses mmxext instructions and should not be
masqueraded as an mmx-only function. Instead, use the mmx-only inline
assembly function.
This fixes crashes in chromium on win64 on machines with AVX
(crashes that apparently aren't triggered by fate).
Signed-off-by: Martin Storsjö <martin@martin.st>
The non-intra-pcm branch in hl_decode_mb (simple, 8bpp) goes from 700
to 672 cycles, and the complete loop of decode_mb_cabac and hl_decode_mb
(in the decode_slice loop) goes from 1759 to 1733 cycles on the clip
tested (cathedral), i.e. almost 30 cycles per mb faster.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Reference:
commit 3615e2be84
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Tue Dec 2 22:02:57 2003 +0000
h263_h_loop_filter_mmx
Originally committed as revision 2553 to svn://svn.ffmpeg.org/ffmpeg/trunk
commit 359f98ded9
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Tue Dec 2 20:28:10 2003 +0000
h263_v_loop_filter_mmx
Originally committed as revision 2552 to svn://svn.ffmpeg.org/ffmpeg/trunk
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
x86: dsputil: Fix h263 loop filter link error in some configurations
Conflicts:
libavcodec/x86/dsputil.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This was caused by unconditionally referencing a conditionally compiled
table. Now the code is also compiled conditionally.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This avoids SIMD-optimized functions having to sign-extend their
line size argument manually to be able to do pointer arithmetic.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The symbol "ff_h263_loop_filter_strength" is defined in h263.c, but
the h263 loopfilter functions (in the .asm file) are not optimized
out (even though their function pointers are never assigned).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '304b806cb524fb040f8e09a241040f1af2cb820b':
build: Make library minor version visible in the Makefile
x86: mpeg4qpel: Make movsxifnidn do the right thing
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also use the resulting 16bpp functions for anything >8 and <=16, not just
9 and 10. This fixes 12 and 14bpp H264 support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Reference:
commit 3615e2be84
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Tue Dec 2 22:02:57 2003 +0000
h263_h_loop_filter_mmx
Originally committed as revision 2553 to svn://svn.ffmpeg.org/ffmpeg/trunk
commit 359f98ded9
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Tue Dec 2 20:28:10 2003 +0000
h263_v_loop_filter_mmx
Originally committed as revision 2552 to svn://svn.ffmpeg.org/ffmpeg/trunk
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a846dccb29d2bb0798af1d47d06100eda9ca87cc':
h264chroma: x86: Fix building with yasm disabled
rv34: Drop now unnecessary dsputil dependencies
Conflicts:
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '620289a20e022b9c16c10d546ef86cc0bb77cc84':
sh4: Fix silly type vs. variable name search and replace typo
configure: Group all hwaccels together in a separate variable
Add av_cold attributes to arch-specific init functions
Conflicts:
configure
libavcodec/arm/mpegvideo_armv5te.c
libavcodec/x86/mlpdsp.c
libavcodec/x86/motion_est.c
libavcodec/x86/mpegvideoenc.c
libavcodec/x86/videodsp_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '25841dfe806a13de526ae09c11149ab1f83555a8':
Use ptrdiff_t instead of int for {avg, put}_pixels line_size parameter.
Conflicts:
libavcodec/alpha/dsputil_alpha.c
libavcodec/dsputil_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
x86: hpel: Move {avg,put}_pixels16_sse2 to hpeldsp
configure: Add a comment indicating why uclibc is checked before glibc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '098eed95bc1a6b2c8ac97f126f62bb74699670cf':
mdec: merge mdec_common_init() into decode_init().
eatgv: use fixed-width types where appropriate.
x86: Simplify some arch conditionals
bfin: Separate VP3 initialization code
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '05b0998f511ffa699407465d48c7d5805f746ad2':
dsputil: Fix error by not using redzone and register name
swscale: GBRP output support
Conflicts:
libswscale/output.c
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/utils.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also fix project name
See git blame/log/show and
commit 826f429ae9
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Sun Jan 5 15:57:10 2003 +0000
qpel in mmx2/3dnow
qpel refinement quality parameter
Originally committed as revision 1393 to svn://svn.ffmpeg.org/ffmpeg/trunk
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This also fixes the project name
Original authors fabrice and nick go back to the initial ffmpeg commit
Others for example contributed in: (for a complete list please use git blame / show / log)
commit e9c0a38ff0
Author: Zdenek Kabelac <kabi@informatics.muni.cz>
Date: Tue May 28 16:35:58 2002 +0000
* optimized avg_* functions (except xy2)
* minor speedup for put_pixels_x2 & cleanup
Originally committed as revision 619 to svn://svn.ffmpeg.org/ffmpeg/trunk
commit 607dce96c0
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Fri May 17 01:04:14 2002 +0000
hopefully faster mmx2&3dnow MC
Originally committed as revision 506 to svn://svn.ffmpeg.org/ffmpeg/trunk
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f90ff772e7e35b4923c2de429d1fab9f2569b568':
Move H264/QPEL specific asm from dsputil.asm to h264_qpel_*.asm.
doc: update the reference for the title
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '69c25c9284645cf5189af2ede42d6f53828f3b45':
dnxhdenc: fix invalid reads in dnxhd_mb_var_thread().
x86: h264qpel: Move stray comment to the right spot and clarify it
atrac3: use correct loop variable in add_tonal_components()
Conflicts:
tests/ref/vsynth/vsynth1-dnxhd-1080i
tests/ref/vsynth/vsynth2-dnxhd-1080i
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2c10e2a2f62477efaef5b641974594f7df4ca339':
build: Make the H.264 parser select h264qpel
x86: h264qpel: add cpu flag checks for init function
Conflicts:
libavcodec/x86/h264_qpel.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The sh4 optimizations are removed, because the code is
100% identical to the C code, so it is unlikely to
provide any real practical benefit.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '2e4bb99f4df7052b3e147ee898fcb4013a34d904':
vorbisdsp: convert x86 simd functions from inline asm to yasm.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Now, nellymoserenc and aacenc no longer depends on dsputil. Independent
of this patch, wmaprodec also does not depend on dsputil, so I removed
it from there also.
* qatar/master:
proresdec: support mixed interlaced/non-interlaced content
vp3/5: move put_no_rnd_pixels_l2 from dsputil to VP3DSPContext.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ce378f0dd0c4e5350b3280e6b3e8d6b46fe4b0a3':
fate: Use wmv2 IDCT for wmv2 tests
vorbisdsp: change block_size type from int to intptr_t.
Conflicts:
tests/fate-run.sh
tests/fate/vcodec.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8a4f26206d7914eaf2903954ce97cb7686933382':
dsputil: remove butterflies_float_interleave.
srtp: Move a variable to a local scope
srtp: Add tests for the crypto suite with 32/80 bit HMAC
Conflicts:
libavcodec/x86/dsputil.asm
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'aeaf268e52fc11c1f64914a319e0edddf1346d6a':
vp3: integrate clear_blocks with idct of previous block.
mpegvideo: fix loop condition in draw_line()
dvdsubdec: parse the size from the extradata
Conflicts:
libavcodec/dvdsubdec.c
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is identical to what e.g. vp8 does, and prevents the function call
overhead (plus dependency on dsputil for this particular function).
Arm asm updated by Janne Grunau <janne-libav@jannau.net>.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* qatar/master:
x86: dsputil: Drop some unused macro definitions
x86: Add a Yasm-based emms() replacement
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavc: Move vector_fmul_window to AVFloatDSPContext
rtpdec_mpeg4: Check the remaining amount of data before reading
Conflicts:
libavcodec/dsputil.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dae1d507af94261bafd3b11549884e5d1eca590e':
x86: Add PAVGB macro to abstract pavgb/pavgusb instruction via cpuflags
vf_fps: add final flushed frames to the dropped frame count
rv34_parser: Adjust #if for disabling individual parsers
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd8c772de53d29afb1bada88afa859fce8489c668':
nutdec: Always return a value from nut_read_timestamp()
configure: Make warnings from -Wreturn-type fatal errors
x86: ABS2: port to cpuflags
vdpau: Remove av_unused attribute from function declaration
h264: fix ff_generate_sliding_window_mmcos() prototype.
Conflicts:
configure
libavformat/nutdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This could also be fixed by changing the argument type if
someone prefers that and wants to change it ...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5b4dfbffc258f90a7d2540d21209ac23afcf7cd0':
x86: ABS1: port to cpuflags
v210x: cosmetics, reformat
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The asm code is not valid for older compilers as it uses too many
operands, ICC on x86_32 seems affected by this.
This patch disables the affected code for ICC on x86_32 and should
make it compileable again.
A better fix would be to use fewer operands or to change this code
to yasm, later is being worked on AFAIK so this is a temporary
solution.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Move some functions from dsputil. The idea is that videodsp contains
functions that are useful for a large and varied set of video decoders.
Currently, it contains emulated_edge_mc() and prefetch().
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Use this in VP8/H264-8bit loopfilter functions so they can be used if
there is no aligned stack (e.g. MSVC 32bit or ICC 10.x).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Use this in VP8/H264-8bit loopfilter functions so they can be used if
there is no aligned stack (e.g. MSVC 32bit or ICC 10.x).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '30b39164256999efc8d77edc85e2e0b963c24834':
ac3dec: make downmix() take array of pointers to channel data
Conflicts:
libavcodec/ac3dsp.c
libavcodec/ac3dsp.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Start and end index are multiple of 2, therefore guaranteeing aligned access.
Also, this allows to generate 4 floats per loop, keeping the alignment all
along.
Timing:
- 32 bits: 326c -> 172c
- 64 bits: 323c -> 156c
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* commit 'af7d13ee4a4bf8d708f9b0598abb8f6e22b76de1':
asink_nullsink: plug a memory leak.
x86: h264_idct: port to cpuflags
x86: cpu: Drop unused HAVE_RWEFLAGS condition
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f5fa03660db16f9d78abc5a626438b4d0b54f563':
vble: Do not abort decoding when version is not 1
lavr: do not pass consumed samples as a parameter to ff_audio_resample()
lavr: correct the documentation for the ff_audio_resample() return value
lavr: do not pass sample count as a parameter to ff_audio_convert()
x86: h264_weight: port to cpuflags
configure: Enable avconv filter dependencies automatically
Conflicts:
configure
libavcodec/x86/h264_weight.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5ae72f54532960cb9eae82a1c9e8d505106c022b':
flashsv: check for keyframe before using differential coding
h264: enable low delay only if no delayed frames were seen
x86: fix build without inline asm
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8e134e5104e99a69cd4cea10540a7ce9c3682a2c':
lavc: clarify get_buffer() documentation
mpegaudiodec: use planar sample format for output unless packed is requested
x86: h264 qpel: use the correct number of utilized xmm regs in cglobal
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The qpel functions referenced here are not related to h264 and should
thus never have been under CONFIG_H264QPEL.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The only CPUs that have 3dnow and don't have mmxext are 12 years old.
Moreover, AMD has dropped 3dnow extensions from newer CPUs.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
x86: dsputil: port to cpuflags
crc: av_crc() parameter names should match between .c, .h and doxygen
avserver: replace av_read_packet with av_read_frame
avserver: fix constness casting warnings
Conflicts:
libavcodec/x86/dsputil.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
flacenc: ensure the order is within the min/max range in LPC order search
avconv: rescale packet duration to muxer time base when flushing encoders
add 24-bit FLAC encoding to Changelog
rtpenc_aac: Fix calculation of the header size
x86: h264_intrapred: port to cpuflags
Conflicts:
Changelog
libavformat/rtpenc_aac.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '930e26a3ea9d223e04bac4cdde13697cec770031':
x86: h264qpel: Only define mmxext QPEL functions if H264QPEL is enabled
x86: PABSW: port to cpuflags
x86: vc1dsp: port to cpuflags
rtmp: Use av_strlcat instead of strncat
Conflicts:
libavcodec/x86/h264_qpel.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9221efef7968463f3e3d9ce79ea72eaca082e73f':
lavf: fix av_interleaved_write_frame() doxy.
lavf: clarify the lifetime of demuxed packets.
avconv: do not free muxed packet on streamcopy.
crc: move doxy to the header
vf_drawtext: do not use deprecated av_tree_node_size
x86: Refactor PSWAPD fallback implementations and port to cpuflags
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9a07c1332cfe092b57b5758f22b686ca58806c60':
parser: Move Doxygen documentation to the header files
PGS subtitles: Expose forced flag
x86: PMINUB: port to cpuflags
Conflicts:
libavcodec/avcodec.h
libavcodec/pgssubdec.c
libavcodec/version.h
libavcodec/x86/ac3dsp.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9ce02e14f01de50fcc6f7f459544b140be66d615':
x86: ac3dsp: port to cpuflags
x86util: Add cpuflags_mmxext alias for cpuflags_mmx2
x86inc: Only define program_name if the macro is unset
Conflicts:
libavcodec/x86/ac3dsp.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: add ac3/eac3 tests to FATE_SAMPLES_AVCONV
avconv_opt, cmdutils: Add missing function parameter Doxygen
x86: Move optimization suffix to end of function names
Conflicts:
cmdutils.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fa8fcab1e0d31074c0644c4ac5194474c6c26415':
x86: h264_chromamc_10bit: drop pointless PAVG %define
x86: mmx2 ---> mmxext in function names
swscale: do not forget to swap data in formats with different endianness
Conflicts:
libavcodec/x86/dsputil_mmx.c
libavfilter/x86/gradfun.c
libswscale/input.c
libswscale/utils.c
libswscale/x86/swscale.c
tests/ref/lavfi/pixfmts_scale
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
aacdec: Drop some unused function arguments
x86: Fix assembly with NASM
x86: fmtconvert: Refactor cvtps2pi emulation through cpuflags
Conflicts:
libavcodec/aacdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'be923ed659016350592acb9b3346f706f8170ac5':
x86: fmtconvert: port to cpuflags
x86: MMX2 ---> MMXEXT in macro names
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6860b4081d046558c44b1b42f22022ea341a2a73':
x86: include x86inc.asm in x86util.asm
cng: Reindent some incorrectly indented lines
cngdec: Allow flushing the decoder
cngdec: Make the dbov variable have the right unit
cngdec: Fix the memset size to cover the full array
cngdec: Update the LPC coefficients after averaging the reflection coefficients
configure: fix print_config() with broke awks
Conflicts:
libavcodec/x86/ac3dsp.asm
libavcodec/x86/dct32.asm
libavcodec/x86/deinterlace.asm
libavcodec/x86/dsputil.asm
libavcodec/x86/dsputilenc.asm
libavcodec/x86/fft.asm
libavcodec/x86/fmtconvert.asm
libavcodec/x86/h264_chromamc.asm
libavcodec/x86/h264_deblock.asm
libavcodec/x86/h264_deblock_10bit.asm
libavcodec/x86/h264_idct.asm
libavcodec/x86/h264_idct_10bit.asm
libavcodec/x86/h264_intrapred.asm
libavcodec/x86/h264_intrapred_10bit.asm
libavcodec/x86/h264_weight.asm
libavcodec/x86/vc1dsp.asm
libavcodec/x86/vp3dsp.asm
libavcodec/x86/vp56dsp.asm
libavcodec/x86/vp8dsp.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
pixfmt: support more yuva formats
swscale: support gray to 9bit and 10bit formats
configure: rewrite print_config() function using awk
FATE: fix (AD)PCM test dependencies broken in e519990
Use ptrdiff_t instead of int for intra pred "stride" function parameter.
x86: use PRED4x4/8x8/8x8L/16x16 macros to declare intrapred prototypes.
Conflicts:
libavcodec/h264pred.c
libavcodec/h264pred_template.c
libavutil/pixfmt.h
libswscale/swscale_unscaled.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Replace INIT_AVX by INIT_XMM avx. Port the whole file to use cpuflag
based function declarations. Remove (now unused) cputype argument in
function declaration macros. Change function prototypes to have mmx2
instead of mmxext as suffix, since that's required by cpuflags.
* qatar/master:
x86: vc1: call ff_vc1dsp_init_x86() under if (ARCH_X86)
x86: cavs: call ff_cavsdsp_init_x86() under if (ARCH_X86)
x86: call most of the x86 dsp init functions under if (ARCH_X86)
doc: support the new website layout
doc: remove a warning from filters.texi
doc: initial nut documentation
segment: drop global headers setting
lavu: fix typo in Makefile
Conflicts:
doc/Makefile
doc/filters.texi
doc/t2h.init
libavcodec/fmtconvert.c
libavcodec/proresdsp.c
libavcodec/x86/Makefile
libavcodec/x86/vc1dsp_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
yuv4mpeg: return proper error codes.
Give all anonymously typedeffed structs in headers a name
fate: Add parseutils test
parseutils-test: Drop random colors from parsing test
vf_pad/scale: use double precision for aspect ratios.
build: error on variable-length arrays
ppc: swscale: rework yuv2planeX_altivec()
ppc: fmtconvert: kill VLA in float_to_int16_interleave_altivec()
x86: dsputil: kill VLA in gmc_mmx()
libspeexenc: Updated commentary to reflect recent changes
libspeexenc: Add an option for enabling DTX
doc/APIchanges: fill in missing dates and hashes.
lavr: bump major to 1 and declare it stable.
lavr: change the type of the data buffers to uint8_t**.
lavc: deprecate the audio resampling API.
Conflicts:
cmdutils.h
configure
doc/APIchanges
ffplay.c
libavcodec/dwt.h
libavcodec/libspeexenc.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavformat/asf.h
tests/fate/libavutil.mak
tests/ref/fate/parseutils
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Instead of using an evil VLA, fall back to C version when edge
emulation is needed. MPEG4 GMC is a rarely used fringe feature
so the speed loss is an acceptable cost for safer code.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
x86: dsputil: Move Xvid IDCT put/add functions to a more suitable place
trasher: Include all the necessary headers
x86: Remove some leftover declarations for non-existent functions
ARM: libavresample: NEON optimised generic fltp to s16 conversion
ARM: libavresample: NEON optimised stereo fltp to s16 conversion
ARM: libavresample: NEON optimised flat float to s16 conversion
Conflicts:
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
os_support: Choose between direct.h and io.h using a configure check
os_support: Include io.h instead of direct.h on mingw32ce
x86: ac3dsp: Only refer to the ac3_downmix_sse symbol if it has been declared
swscale: Remove two bogus asserts
ac3: move ac3_downmix() from dsputil to ac3dsp
lavr/audio_mix_matrix: acknowledge the existence of LFE2.
mlp_parser: avoid mapping multiple disctinct TrueHD channels to the same Libav channel.
lavu/audioconvert: add a second low frequency channel.
Conflicts:
doc/APIchanges
libavcodec/ac3dsp.c
libavcodec/ac3dsp.h
libavcodec/mlp_parser.c
libavutil/audioconvert.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
x86: dsputil: Only compile motion_est code when encoders are enabled
mem: fix typo in check for __ICC
fate: mp3: drop redundant CMP setting
rtp: Depacketization of JPEG (RFC 2435)
Rename ff_put_string to avpriv_put_string
mjpeg: Rename some symbols to avpriv_* instead of ff_*
yadif: cosmetics
Conflicts:
Changelog
libavcodec/mjpegenc.c
libavcodec/x86/Makefile
libavfilter/vf_yadif.c
libavformat/version.h
libavutil/mem.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
swscale: Provide the right alignment for external mmx asm
x86: Replace checks for CPU extensions and flags by convenience macros
configure: msvc: fix/simplify setting of flags for hostcc
x86: mlpdsp: mlp_filter_channel_x86 requires inline asm
Conflicts:
libavcodec/x86/fft_init.c
libavcodec/x86/h264_intrapred_init.c
libavcodec/x86/h264dsp_init.c
libavcodec/x86/mpegaudiodec.c
libavcodec/x86/proresdsp_init.c
libavutil/x86/float_dsp_init.c
libswscale/utils.c
libswscale/x86/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mov_chan: Only set the channel_layout if setting it to a nonzero value
mov_chan: Reindent an incorrectly indented line
mp2 muxer: mark as AVFMT_NOTIMESTAMPS.
x86: float_dsp: fix ff_vector_fmac_scalar_avx() on Win64
x86: more specific checks for availability of required assembly capabilities
x86: avcodec: Drop silly "_mmx" suffix from dsputil template names
fate: Drop redundant setting of FUZZ to 1
cavsdsp: set idct permutation independently of dsputil
x86: allow using add_hfyu_median_prediction_cmov on any cpu with cmov
Conflicts:
libavcodec/x86/dsputil_mmx.c
libavformat/mp3enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For some reason add_hfyu_median_prediction_cmov is only selected
on 3Dnow-capable CPUs, even though it uses no 3Dnow instructions.
This patch allows it to be selected on any cpu with cmov with the
possibility of being overridden by the mmxext version.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
fate: Allow setting the ld parameter from the config file
x86: dsputil: Do not redundantly check for CPU caps before calling init funcs
configure: Disable some warnings in MSVC
x86: vp56: cmov version of vp56_rac_get_prob requires inline asm
avopt: fix examples to match the same style about default values as the actual code.
configure: Add support for MSVC cl.exe/link.exe
lavu: add snprintf(), vsnprint() and strtod() replacements for MS runtime.
Conflicts:
libavutil/opt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
configure: add support for bdver1 and bdver2 CPU types.
avio: make avio_close NULL the freed buffer
pixdesc: cosmetics
proresenc: Don't free a buffer not owned by the codec
proresenc: Write the full value in one put_bits call
adpcmenc: Calculate the IMA_QT predictor without overflow
x86: Add convenience macros to check for CPU extensions and flags
x86: h264dsp: drop some unnecessary ifdefs around prototype declarations
mss12: merge decode_pixel() and decode_top_left_pixel()
mss12: reduce SliceContext size from 1067 to 164 KB
mss12: move SliceContexts out of the common context into the codec contexts
Conflicts:
libavformat/aviobuf.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
MSS1 and MSS2: set final pixel format after common stuff has been initialised
MSS2 decoder
configure: handle --disable-asm before check_deps
x86: Split inline and external assembly #ifdefs
configure: x86: Separate inline from standalone assembler capabilities
pktdumper: Use a custom define instead of PATH_MAX for buffers
pktdumper: Use av_strlcpy instead of strncpy
pktdumper: Use sizeof(variable) instead of the direct buffer length
Conflicts:
Changelog
configure
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/dct-test.c
libavcodec/imgconvert.c
libavcodec/mss12.c
libavcodec/version.h
libavfilter/x86/gradfun.c
libswscale/x86/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec36aa69448f20a78d8c4588265022e0b2272ab5':
x86: Fix linking with some or all of yasm, mmx, optimizations disabled
configure: Add more fine-grained SSE CPU capabilities flags
avfilter: x86: Use more precise compile template names
x86: cosmetics: Comment some #endifs for better readability
g723_1: add comfort noise generation
utvideoenc: Switch to dsputils' median prediction
utvideoenc: Avoid writing into the input picture
avtools: remove the distinction between func_arg and func2_arg.
avconv: make the -passlogfile option per-stream.
avconv: make the -pass option per-stream.
cmdutils: make -codecs print lossy/lossless flags.
lavc: add lossy/lossless codec properties.
Conflicts:
Changelog
cmdutils.c
configure
doc/APIchanges
ffmpeg.h
ffmpeg_opt.c
ffprobe.c
libavcodec/codec_desc.c
libavcodec/g723_1.c
libavcodec/utvideoenc.c
libavcodec/version.h
libavcodec/x86/mpegaudiodec.c
libavcodec/x86/rv40dsp_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
build: export filtered -lz flag in config.mak
build: add separate setting for host linker
configure: probe_cc: use separate variable for linker output flag
x86: Always compile files with functions that are called unconditionally
x86: mpegvideoenc: fix linking with --disable-mmx
x86: mpegvideoenc: Do not abuse HAVE_ variables for template instantiation
Conflicts:
Makefile
configure
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd488c3bcbaf7ddda42597e014deb661a7e9e2112':
configure: support Bitrig OS
yuv2rgb: handle line widths that are not a multiple of 4.
graph2dot: Use the fallback getopt implementation if needed
tools: Include io.h for open/read/write/close if unistd.h doesn't exist
testprogs: Remove unused includes
qt-faststart: Use other seek/tell functions on MSVC than on mingw
ismindex: Include direct.h for _mkdir on windows
sdp: Use static const char arrays instead of pointers to strings
x86: avcodec: Drop silly "_mmx" suffixes from filenames
x86: avcodec: Drop silly "_sse" suffixes from filenames
sdp: Include profile-level-id for H264
utvideoenc: use ff_huff_gen_len_table
huffman: add ff_huff_gen_len_table
cllc: simplify/fix swapped data buffer allocation.
rtpdec_h264: Don't set the pixel format
h264: Check that the codec isn't null before accessing it
audio_frame_queue: Define af_queue_log_state before using it
Conflicts:
libavcodec/audio_frame_queue.c
libavcodec/h264.c
libavcodec/huffman.h
libavcodec/huffyuv.c
libavcodec/utvideoenc.c
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The optimized dct_quantize template functions reference optimized
fdct symbols, so these functions must only be enabled if the relevant
optimizations have been enabled by configure.
* qatar/master:
vf_hqdn3d: Don't declare the loop variable within the for loop
huffyuv: update to current coding style
huffman: update to current coding style
rtsp: Free the rtpdec context properly
build: fft: x86: Drop unused YASM-OBJS-FFT- variable
Conflicts:
libavcodec/huffman.c
libavcodec/huffyuv.c
libavcodec/x86/Makefile
libavfilter/vf_hqdn3d.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a1bcc76e6036e78f25cbb7323c145056cfca9d93': (21 commits)
cmdutils: fix a memleak when specifying an option twice.
x86: mpegvideo: more sensible names for optimization file and init function
x86: mpegvideoenc: Split optimizations off into a separate file
dnxhdenc: x86: more sensible names for optimization file and init function
svq1/svq3: Move common code out of SVQ1 decoder-specific file
dirac: add Comments and references to the standard
lavr: x86: optimized 6-channel flt to fltp conversion
lavr: x86: optimized 2-channel flt to fltp conversion
lavr: x86: optimized 6-channel flt to s16p conversion
lavr: x86: optimized 2-channel flt to s16p conversion
lavr: x86: optimized 6-channel s16 to fltp conversion
lavr: x86: optimized 2-channel s16 to fltp conversion
lavr: x86: optimized 6-channel s16 to s16p conversion
lavr: x86: optimized 2-channel s16 to s16p conversion
lavr: x86: optimized 2-channel fltp to flt conversion
lavr: x86: optimized 6-channel fltp to s16 conversion
lavr: x86: optimized 2-channel fltp to s16 conversion
lavr: x86: optimized 6-channel s16p to flt conversion
lavr: x86: optimized 2-channel s16p to flt conversion
lavr: x86: optimized 6-channel s16p to s16 conversion
...
Conflicts:
libavcodec/dirac.c
libavcodec/mpegvideo.h
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
build: x86: Only compile mpegvideo optimizations when necessary
configure: Drop fastdiv option
build: Make the E-AC-3 encoder select the AC-3 encoder
fate: flac: Only run tests requiring samples when samples are available
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fix even more missing includes after the common.h removal
build: Factor out rangecoder dependencies to CONFIG_RANGECODER
build: Factor out error resilience dependencies to CONFIG_ERROR_RESILIENCE
x86: avcodec: Consistently name all init files
Add more missing includes after removing the implicit common.h
Add some more missing includes after removing the implicit common.h
Don't include common.h from avutil.h
rtmp: Automatically compute the hash for SWFVerification
Conflicts:
configure
doc/APIchanges
doc/examples/decoding_encoding.c
libavcodec/Makefile
libavcodec/assdec.c
libavcodec/audio_frame_queue.c
libavcodec/avpacket.c
libavcodec/dv_profile.c
libavcodec/dwt.c
libavcodec/libtheoraenc.c
libavcodec/rawdec.c
libavcodec/rv40dsp.c
libavcodec/tiff.c
libavcodec/tiffenc.c
libavcodec/v210dec.h
libavcodec/vc1dsp.c
libavcodec/x86/Makefile
libavfilter/asrc_anullsrc.c
libavfilter/avfilter.c
libavfilter/buffer.c
libavfilter/formats.c
libavfilter/vf_ass.c
libavfilter/vf_drawtext.c
libavfilter/vf_fade.c
libavfilter/vf_select.c
libavfilter/video.c
libavfilter/vsrc_testsrc.c
libavformat/version.h
libavutil/audioconvert.c
libavutil/error.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtmp: Add support for SWFVerification
api-example: use new video encoding API.
x86: avcodec: Appropriately name files containing only init functions
mpegvideo_mmx_template: drop some commented-out cruft
libavresample: add mix level normalization option
w32pthreads: Add missing #includes to make header compile standalone
rtmp: Gracefully ignore _checkbw errors by tracking them
rtmp: Do not send _checkbw calls as notifications
prores: interlaced ProRes encoding
Conflicts:
doc/examples/decoding_encoding.c
libavcodec/proresenc_kostya.c
libavcodec/w32pthreads.h
libavcodec/x86/Makefile
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes two issues preventing suncc from building this code.
The undocumented 'a' operand modifier, causing gcc to omit a $ in
front of immediate operands (as required in addresses), is not
supported by suncc. Luckily, the also undocumented 'c' modifer
has the same effect and is supported.
On some asm statements with a large number of operands, suncc for no
obvious reason fails to correctly substitute some of the operands.
Fortunately, some of the operands in these statements are plain
numbers which can be inserted directly into the code block instead
of passed as operands.
With these changes, the code builds correctly with both gcc and
suncc.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This code contains a C array of addresses of labels defined in
inline asm. To do this, the names must be declared as external
in C. The declared type does not matter since only the address is
used, and for some reason, the author of the code used the 'void'
type despite taking the address of a void expression being invalid.
Changing the type to char, a reasonable choice since the alignment
of the code labels cannot be known or guaranteed, eliminates gcc
warnings and allows building with suncc.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (22 commits)
g723.1: do not pass large structs by value
g723.1: do not bounce intermediate values via memory
g723.1: declare a variable in the block it is used
g723.1: avoid saving/restoring excitation
g723.1: avoid unnecessary memcpy() in residual_interp()
g723.1: make postfilter write directly to output buffer
g723.1: drop unnecessary variable buf_ptr in formant_postfilter()
g723.1: make scale_vector() output to a separate buffer
g723.1: make autocorr_max() work on an arbitrary buffer
g723.1: do not needlessly use int64_t
g723.1: use saturating addition functions
g723.1: optimise scale_vector()
g723.1: remove useless uses of MUL64()
g723.1: remove unnecessary argument 'shift' from dot_product()
g723.1: deobfuscate "(x << 4) - x" to "15 * x"
celp: optimise ff_celp_lp_synthesis_filter()
libavutil: add saturating addition functions
cllc: Implement ARGB support
cllc: Add support for QRGB
cllc: Rename some funcs to represent what they actually do
...
Conflicts:
LICENSE
libavcodec/g723_1.c
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegvideo: reduce excessive inlining of mpeg_motion()
mpegvideo: convert mpegvideo_common.h to a .c file
build: factor out mpegvideo.o dependencies to CONFIG_MPEGVIDEO
Move MASK_ABS macro to libavcodec/mathops.h
x86: move MANGLE() and related macros to libavutil/x86/asm.h
x86: rename libavutil/x86_cpu.h to libavutil/x86/asm.h
aacdec: Don't fall back to the old output configuration when no old configuration is present.
rtmp: Add message tracking
rtsp: Support mpegts in raw udp packets
rtsp: Support receiving plain data over UDP without any RTP encapsulation
rtpdec: Remove an unused include
rtpenc: Remove an av_abort() that depends on user-supplied data
vsrc_movie: discourage its use with avconv.
avconv: allow no input files.
avconv: prevent invalid reads in transcode_init()
avconv: rename OutputStream.is_past_recording_time to finished.
Conflicts:
configure
doc/filters.texi
ffmpeg.c
ffmpeg.h
libavcodec/Makefile
libavcodec/aacdec.c
libavcodec/mpegvideo.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This macro is only used in two places, both in libavcodec, so this
is a more sensible place for it.
Two small tweaks to the macro are made:
- removing the trailing semicolon
- dropping unnecessary 'volatile' from the x86 asm
Signed-off-by: Mans Rullgard <mans@mansr.com>
