This reverts commit a50f0bea25.
This has been implemented differently in qatar and its better they
maintain it for me instead of me having to spend an average 5sec more
per merge
Conflicts:
libavcodec/h264.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
By observation it did not seem to handle prev_frame_num > frame_num.
This does not affect any files I have.
(cherry picked from commit 43c0092a80f8212cbb783260bafa157f7b85126e)
* qatar/master:
configure: Add -U__STRICT_ANSI__ to CPPFLAGS on Cygwin and DOS.
aacdec: fix typo in scalefactor clipping check
fate: fix fate-h264-conformance-frext-pph10i4-panasonic-a crcs.
fate: update 9/10bit refs.
h264: Properly set coded_{width, height} when parsing H.264.
x86 asm: Add SECTION_TEXT to dct32_sse.asm.
Fix 9/10 bit in swscale.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* ffmpeg-mt/master:
Update todo.
h264: add an assert that copied pictures are valid picture pointers
valgrind-check: run with 1 and 3 threads
h264: When decoding a packet with multiple PPS/SPS, don't start the next thread until all of them have been read
Allow some pictures to be released earlier after 51ead6d2c40c5defdd211f435aec49b19f5f6a18
h264: fix slice threading MC reading uninitialized frame edges.
Please see ffmpeg-mt for a list of authors of these changes.
Conflicts:
libavcodec/h264.c
mt-work/valgrind-check.sh
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
qdm2: Use floating point synthesis filter.
h264: correct border check.
h264: fix loopfilter with threading at slice boundaries.
Fix ff_mpa_synth_filter_fixed() prototype
Rename costablegen.c ---> cos_tablegen.c.
Collapse tableprint.c into tableprint.h.
Simplify trig table rules
Remove potentially unstable filenames from comments in generated files.
Ignore generated tables and generated table generator programs.
Simplify CLEANFILES make variable by using wildcards.
Remove silly insults from avformat_version() Doxygen documentation.
mpegaudiodsp: fix x86 and ppc makefiles
configure: Adjust AVX assembler check.
mpegaudio: remove unused version of SAME_HEADER_MASK
mpegaudio: remove useless #undef at end of file
asfdec: add missing #include for av_bswap32()
mpegaudio: merge two #if CONFIG_FLOAT blocks
mpegaudio: move some struct definitions from mpegaudio.h
Move some mpegaudio functions to new mpegaudiodsp subsystem
Conflicts:
libavcodec/h264.c
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When backing up the top-left border, check that the top-left
(rather than left) MB indeed does belong to our slice. If it
doesn't, backing up has no positive effect but may accidentally
interfere with other threads writing in the same space.
Fixes occasional one-off effects when enabling slice-MT.
* qatar/master:
APIchanges: fill in date and commit for request_sample_fmt
Add floating-point sample format support to the ac3, eac3, dca, aac, and vorbis decoders.
Add support for request_sample_format in ffmpeg and ffplay.
Add APIchanges entry for request_sample_fmt.
Add request_sample_fmt field to AVCodecContext.
Add float_interleave() to FmtConvertContext with x86-optimized versions.
Remove unused make variable SEEK_REFFILE
fate: remove redundant aref and vref references
fate: remove do_ffmpeg_nocheck function
fate: do not collect -benchmark output
mpegaudiodec: remove decode_end() function
fate: run aref and vref as regular tests
mpegaudio: sanitise compute_antialias_* names
mpeg12: add slice-threading checks to slice-threading initializers.
h264: copy pixel_shift between slice threading contexts.
mdec: enable frame-level multithreading.
mdec.c: fix overread.
Conflicts:
libavcodec/aacdec.c
libavcodec/ac3dec.c
libavcodec/avcodec.h
libavcodec/dca.c
libavcodec/h264.c
libavcodec/mdec.c
libavcodec/mpeg12.c
libavcodec/options.c
libavcodec/version.h
libavcodec/vorbisdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (30 commits)
AVOptions: make default_val a union, as proposed in AVOption2.
arm/h264pred: add missing argument type.
h264dsp_mmx: place bracket outside #if/#endif block.
lavf/utils: fix ff_interleave_compare_dts corner case.
fate: add 10-bit H264 tests.
h264: do not print "too many references" warning for intra-only.
Enable decoding of high bit depth h264.
Adds 8-, 9- and 10-bit versions of some of the functions used by the h264 decoder.
Add support for higher QP values in h264.
Add the notion of pixel size in h264 related functions.
Make the h264 loop filter bit depth aware.
Template dsputil_template.c with respect to pixel size, etc.
Template h264idct_template.c with respect to pixel size, etc.
Preparatory patch for high bit depth h264 decoding support.
Move some functions in dsputil.c into a new file dsputil_template.c.
Move the functions in h264idct into a new file h264idct_template.c.
Move the functions in h264pred.c into a new file h264pred_template.c.
Preparatory patch for high bit depth h264 decoding support.
Add pixel formats for 9- and 10-bit yuv420p.
Choose h264 chroma dc dequant function dynamically.
...
Conflicts:
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/alpha/dsputil_alpha.c
libavcodec/arm/dsputil_init_arm.c
libavcodec/arm/dsputil_init_armv6.c
libavcodec/arm/dsputil_init_neon.c
libavcodec/arm/dsputil_iwmmxt.c
libavcodec/arm/h264pred_init_arm.c
libavcodec/bfin/dsputil_bfin.c
libavcodec/dsputil.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/h264_loopfilter.c
libavcodec/h264_ps.c
libavcodec/h264_refs.c
libavcodec/h264dsp.c
libavcodec/h264idct.c
libavcodec/h264pred.c
libavcodec/mlib/dsputil_mlib.c
libavcodec/options.c
libavcodec/ppc/dsputil_altivec.c
libavcodec/ppc/dsputil_ppc.c
libavcodec/ppc/h264_altivec.c
libavcodec/ps2/dsputil_mmi.c
libavcodec/sh4/dsputil_align.c
libavcodec/sh4/dsputil_sh4.c
libavcodec/sparc/dsputil_vis.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/dsputil_mmx.c
libavformat/options.c
libavformat/utils.c
libavutil/pixfmt.h
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/swscale_template.c
tests/ref/seek/lavf_avi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
One of the causes of this bug is that the h264 parser defaults low_delay
to 1, but the h264 codec defaults low_delay to 0. Really Ugly.
After many hours of looking at this, I'm still not sure how has_b_frames
is *intended* to behave, but to me the implementation appears way more
complicated than it ought to be.
My patch relies on the encoder to set an optional field in the SPS. This
works for libx264 streams, but I'm not sure that all h264 encoders will
set it.
* qatar/master:
Duplicate AMV: disable DR1 and don't override EMU_EDGE
Duplicate lavf: inspect more frames for fps when container time base is coarse
Wrong and we have correct fix: Fix races in default av_log handler
vorbis: Replace sized int_fast integer types with plain int/unsigned.
Remove disabled non-optimized code variants.
NO bswap.h: Remove disabled code.
Remove some disabled printf debug cruft.
Replace more disabled printf() calls by av_dlog().
NO tests: Remove disabled code.
NO Replace some commented-out debug printf() / av_log() messages with av_dlog().
vorbisdec: Replace some sizeof(type) by sizeof(*variable).
NO vf_fieldorder: Replace FFmpeg by Libav in license boilerplate.
Conflicts:
libavcodec/h264.c
libavcodec/vorbisdec.c
libavutil/log.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
APIChanges: document git revision for CODEC_CAP_SLICE_THREADS addition.
Introduce slice threads flag.
FATE: allow forcing thread-type when doing threaded fate runs.
Use av_log_ask_for_sample() where appropriate.
error: sort, pack, and align error code and string definitions
The stabilization period after version bumps should be one month, not one week.
applehttp: Expose the stream bitrate via metadata
doc: Add some initial docs on the applehttp demuxer
Provide a fallback version of the libm function trunc
libavdevice: Define _XOPEN_SOURCE for usleep
lavc: provide deprecated avcodec_thread_init until next major version
lavc: provide the opt.h header until the next bump
error: change AVERROR_EOF value
error: remove AVERROR_NUMEXPECTED
error: add error code AVERROR_OPTION_NOT_FOUND, and use it in opt.c
Conflicts:
libavcodec/h264.c
libavutil/error.c
libavutil/error.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* ffmpeg-mt/master:
Release unused pictures even when not calling ff_h264_frame_start()
h264: Fix decoding race condition with PAFF
h264: cosmetic whitespace change
Duplicate Fix REBASE_PICTURE with h.264
Not pulled Update test scripts to use ffmpeg instead of ffmpeg_g
Duplicate Fix ffmpeg-mt fixme in h264
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fixed-point MDCT with 32-bit unscaled output
lavc: deprecate rate_emu
lavc: mark hurry_up for removal on next major bump
parser: mark av_parser_parse() for removal on next major bump
lavc: add missing audioconvert includes
jvdec: don't use deprecated CODEC_TYPE_*/PKT_FLAG_KEY
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is pretty hopeless that other considerable projects will adopt
libavutil alone in other projects. Projects that need small footprint
are better off with more specialized libraries such as gnulib or rather
just copy the necessary parts that they need. With this in mind, nobody
is helped by having libavutil and libavcore split. In order to ease
maintenance inside and around FFmpeg and to reduce confusion where to
put common code, avcore's functionality is merged (back) to avutil.
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
None of these symbols should be accessed directly, so declare them as
hidden.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit d36beb3f69)
The header is empty after making the function static, so delete it and
drop its usage.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
(cherry picked from commit 13eb6b9097)
Don't free RBSP tables (containing decoded NAL units) on resolution
change, because we actually need this data to decode the frame after
reiniting (with new resolution). Fixed issue 2393.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
(cherry picked from commit 9107892624)
It's incomplete, no one is working on it, and when someone asks about
working on it we advise them not to.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit ff3d43104f)
Don't free RBSP tables (containing decoded NAL units) on resolution
change, because we actually need this data to decode the frame after
reiniting (with new resolution). Fixed issue 2393.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
It's incomplete, no one is working on it, and when someone asks about
working on it we advise them not to.
Signed-off-by: Mans Rullgard <mans@mansr.com>
No speed improvement, but necessary for some future stuff.
Also opens up the possibility of asm chroma dc idct/dequant.
Originally committed as revision 26349 to svn://svn.ffmpeg.org/ffmpeg/trunk
Doesn't help speed as there isn't an asm implementation yet, but consistency
is a good thing.
Originally committed as revision 26348 to svn://svn.ffmpeg.org/ffmpeg/trunk
Useful so that we don't have to run the hierarchical DC iDCT if there aren't
any coefficients. Opens up some future opportunities for optimization as well.
Originally committed as revision 26337 to svn://svn.ffmpeg.org/ffmpeg/trunk
About 2.5x the speed.
NOTE: the way that the asm code handles large qmuls is a bit suboptimal.
If x264-style dequant was used (separate shift and qmul values), it might
be possible to get some extra speed.
Originally committed as revision 26336 to svn://svn.ffmpeg.org/ffmpeg/trunk
It was an ugly hack to begin with and didn't give any performance.
NOTE: this patch opens up some future simplifications to be made (such as
removing some of the scantables from H264Context) but doesn't take advantage
of them yet.
Originally committed as revision 26329 to svn://svn.ffmpeg.org/ffmpeg/trunk
svq3 still doesn't support multithreading, but it's simpler for clients if
they can enable threading for all codecs by default.
Originally committed as revision 26015 to svn://svn.ffmpeg.org/ffmpeg/trunk
Contrary to progressive, just being able to crop up to 14/15 pixels
is not enough to encode all supported resolutions, and the new
behaviour is also consistent with e.g. MPEG-2 etc.
Originally committed as revision 25669 to svn://svn.ffmpeg.org/ffmpeg/trunk
r25218 made assumptions about the existence of past reference frames that
weren't necessarily true.
Originally committed as revision 25243 to svn://svn.ffmpeg.org/ffmpeg/trunk
h264dsp_mmx.c to h264_idct.asm (as yasm code). Because the loops are now
coded in asm instead of C, this is (depending on the function) up to 50%
faster for cases where gcc didn't do a great job at looping.
Since h264_idct_add8() is now faster than the manual loop setup in h264.c,
in-asm idct calling can now be enabled for chroma as well (see r16207). For
MMX, this is 5% faster. For SSE2 (which isn't done for chroma if h264.c does
the looping), this makes it up to 50% faster. Speed gain overall is ~0.5-1.0%.
Originally committed as revision 25119 to svn://svn.ffmpeg.org/ffmpeg/trunk
Passing an explicit filename to this command is only necessary if the
documentation in the @file block refers to a file different from the
one the block resides in.
Originally committed as revision 22921 to svn://svn.ffmpeg.org/ffmpeg/trunk
The function is only used within that file, so it makes sense to place
it there. This fixes many warnings of the type:
h264.h:1170: warning: ‘fill_filter_caches’ defined but not used
Originally committed as revision 22876 to svn://svn.ffmpeg.org/ffmpeg/trunk
start of decoding a picture instead of at the end.
Fixes mmco01.264
Patch by Stephen Warren
Originally committed as revision 22728 to svn://svn.ffmpeg.org/ffmpeg/trunk
change, not only size changes.
Patch by Janusz Krzysztofik foo=zyszt <jkr$foo@tis.icnet.pl>.
Originally committed as revision 22597 to svn://svn.ffmpeg.org/ffmpeg/trunk
This moves the H264-specific functions from DSPContext to the new
H264DSPContext. The code is made conditional on CONFIG_H264DSP
which is set by the codecs requiring it.
The qpel and chroma MC functions are not moved as these are used by
non-h264 code.
Originally committed as revision 22565 to svn://svn.ffmpeg.org/ffmpeg/trunk
Previously, the area of a lost slice would be left at the slice number of the previous
frame which could occasionally match the number of the next slice and thus a non existing
slice could have been used for prediction leading to additional decoding errors in otherwise
undamaged slices.
Originally committed as revision 22483 to svn://svn.ffmpeg.org/ffmpeg/trunk
This fixes playback of such streams with ffplay (but does not affect
current ffmpeg).
Patch by Janusz Krzysztofik, jkrzyszt A tis D icnet D pl
Originally committed as revision 22112 to svn://svn.ffmpeg.org/ffmpeg/trunk
about 5 cpu cycles slower in the local code but should be overall faster
due to reduced cache use. (my sample though has too few intra4x4 blocks
for this to be meassureable easily either way)
Originally committed as revision 22052 to svn://svn.ffmpeg.org/ffmpeg/trunk
The code read/write code itself was 1 cycle faster, overall its
likely more due to cache effects
Originally committed as revision 22048 to svn://svn.ffmpeg.org/ffmpeg/trunk
This eliminates all aliasing violation warnings in h264 code.
No measurable speed difference with gcc-4.4.3 on i7.
Originally committed as revision 21881 to svn://svn.ffmpeg.org/ffmpeg/trunk
the row code. This function would only be needed on a MB basis for MBAFF+FMO
Originally committed as revision 21860 to svn://svn.ffmpeg.org/ffmpeg/trunk
