* qatar/master:
drawtext: remove typo
pcm-mpeg: implement new audio decoding api
w32thread: port fixes to pthread_cond_broadcast() from x264.
doc: add editor configuration section with Vim and Emacs settings
dxva2.h: include d3d9.h to define LPDIRECT3DSURFACE9
avformat/utils: Drop unused goto label.
doxygen: Replace '\' by '@' in Doxygen markup tags.
cosmetics: drop some completely pointless parentheses
cljr: simplify CLJRContext
drawtext: introduce rand(min, max)
drawtext: introduce explicit draw/hide variable
rtmp: Use nb_invokes for all invoke commands
Conflicts:
libavcodec/mpegvideo.c
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In 1bpp mode, interpret skip&0x80 as "start a new line" instead of "go to next line", this is almost the same except for the first line which was always skipped before and caused to try to write an extra line at the end of the frame (ticket #226).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* shariman/wmall:
Fix lms_update()
Move num_lms reading out of a loop
Use correct value for range
Fix some int / int16_t / int32_t confusion
Implement revert_mclms() and associated functions
Fix two more int16_t vs. int confusion
Init s->cdlms[][].recent to order - 1
Add a size argument to dump_int_buffer()
Get rid of logging that are not required anymore
Fix some int vs. int16_t confusion
Conflicts:
libavcodec/wmalosslessdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mov: Don't av_malloc(0).
avconv: only allocate 1 AVFrame per input stream
avconv: fix memleaks due to not freeing the AVFrame for audio
h264-fate: remove -strict 1 except where necessary (mr4/5-tandberg).
misc Doxygen markup improvements
doxygen: eliminate Qt-style doxygen syntax
g722: Add a regression test for muxing/demuxing in wav
g722: Change bits per sample to 4
g722dec: Signal skipping the lower bits via AVOptions instead of bits_per_coded_sample
api-example: update to use avcodec_decode_audio4()
avplay: use avcodec_decode_audio4()
avplay: use a separate buffer for playing silence
avformat: use avcodec_decode_audio4() in avformat_find_stream_info()
avconv: use avcodec_decode_audio4() instead of avcodec_decode_audio3()
mov: Allow empty stts atom.
doc: document preferred Doxygen syntax and make patcheck detect it
Conflicts:
avconv.c
ffplay.c
libavcodec/mlpdec.c
libavcodec/version.h
libavformat/mov.c
tests/codec-regression.sh
tests/fate/h264.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Earlier, bits per sample was defined as 8, since
bits_per_coded_sample was used to indicate whether to ignore
the lower bits of the codeword, having values 6, 7 or 8.
g722 encodes 2 samples into one byte codeword, therefore the
bits per sample is 4. By changing this, the generated timestamps
for streams encoded with g722 become correct.
This makes timestamp generation for g722 data correct (both when
encoding and when demuxing from raw g722 files).
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids using bits_per_coded_sample for this information.
bits_per_coded_sample should be 4 for this codec normally,
since two samples are encoded into one 8 bit codeword.
In principle, this might be info that needs to be passed from
a demuxer, and in that case, a private AVOption isn't the best
choice, but no such samples are available at the moment, so
that use case is purely theoretical at the moment.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
h264: fix frame reordering code.
fate: Add a test for the VBLE decoder
doc: break some long lines in developer.texi
drawtext: make x and y parametric
drawtext: manage memory allocation better
drawtext: refactor draw_text
doc: remove space between variable and post increment in example code
Conflicts:
doc/developer.texi
doc/filters.texi
libavcodec/h264.c
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When decoding lossy WavPack samples, they are supposed
to be clipped, in order to be decoded correctly.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
aac_latm: reconfigure decoder on audio specific config changes
latmdec: fix audio specific config parsing
Add avcodec_decode_audio4().
avcodec: change number of plane pointers from 4 to 8 at next major bump.
Update developers documentation with coding conventions.
svq1dec: avoid undefined get_bits(0) call
ARM: h264dsp_neon cosmetics
ARM: make some NEON macros reusable
Do not memcpy raw video frames when using null muxer
fate: update asf seektest
vp8: flush buffers on size changes.
doc: improve general documentation for MacOSX
asf: use packet dts as approximation of pts
asf: do not call av_read_frame
rtsp: Initialize the media_type_mask in the rtp guessing demuxer
Cleaned up alacenc.c
Conflicts:
doc/APIchanges
doc/developer.texi
libavcodec/8svx.c
libavcodec/aacdec.c
libavcodec/ac3dec.c
libavcodec/avcodec.h
libavcodec/nellymoserdec.c
libavcodec/tta.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/wmadec.c
libavformat/asfdec.c
tests/ref/seek/lavf_asf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Pass the correct size in bits to mpeg4audio_get_config and add a flag
to disable parsing of the sync extension when the size is not known.
Latm with AudioMuxVersion 0 does not specify the size of the audio
specific config. Data after the audio specific config can be
misinterpreted as sync extension resulting in random and wrong configs.
Add AV_NUM_DATA_POINTERS to simplify the bump transition.
This will allow for supporting more planar audio channels without having to
allocate separate pointer arrays.
* qatar/master: (25 commits)
rtpenc: Add support for G726 audio
rtpdec: Interpret the different G726 names as bits_per_coded_sample
rtpenc: Change rtp_send_samples to handle sample sizes other than even bytes
rtpenc: Cast a rescaling parameter to int64_t
h264: cap max has_b_frames at MAX_DELAYED_PIC_COUNT - 1.
ARM: fix indentation in ff_dsputil_init_neon()
ARM: NEON put/avg_pixels8/16 cosmetics
ARM: add remaining NEON avg_pixels8/16 functions
ARM: clean up NEON put/avg_pixels macros
fate: split acodec-pcm into individual tests
swscale: #include "libavutil/mathematics.h"
pmpdec: don't use deprecated av_set_pts_info.
rv34: align temporary block of "dct" coefs
Add PlayStation Portable PMP format demuxer
proto: Realign struct initializers
proto: Use .priv_data_size to allocate the private context
mmsh: Properly clean up if the second ffurl_alloc failed
rtmp: Clean up properly if the handshake failed
md5proto: Remove the get_file_handle function
applehttpproto: Use the close function if the open function fails
...
Conflicts:
libavcodec/vble.c
libavformat/mmsh.c
libavformat/pmpdec.c
libavformat/udp.c
tests/ref/acodec/pcm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This change was dependent on a different patch that
never actually made it into FFmpeg, and it actually
ended up breaking builds.
This reverts commit 70cf7bb958.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There's no reason to use two arrays for this.
Based off commit 2fea60c600
to FFmpeg by Michael Niedermayer.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
rtpdec: Templatize the code for different g726 bitrate variants
rv40: move loop filter to rv34dsp context
lavf: make av_set_pts_info private.
rtpdec: Add support for G726 audio
rtpdec: Add an init function that can do custom codec context initialization
avconv: make copy_tb on by default.
matroskadec: don't set codec timebase.
rmdec: don't set codec timebase.
avconv: compute next_pts from input packet duration when possible.
lavf: estimate frame duration from r_frame_rate.
avconv: update InputStream.pts in the streamcopy case.
Conflicts:
avconv.c
libavdevice/alsa-audio-dec.c
libavdevice/bktr.c
libavdevice/fbdev.c
libavdevice/libdc1394.c
libavdevice/oss_audio.c
libavdevice/v4l.c
libavdevice/v4l2.c
libavdevice/vfwcap.c
libavdevice/x11grab.c
libavformat/au.c
libavformat/eacdata.c
libavformat/flvdec.c
libavformat/mpegts.c
libavformat/mxfenc.c
libavformat/rtpdec_g726.c
libavformat/wtv.c
libavformat/xmv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The next call to decode() will update from an invalid index, which will
either lead to a memcpy() where dest==src (2 threads), or lead to a
crash (>2 threads).
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
adtsenc: Check frame size.
txd: Fix order of operations.
APIchanges: fill in some blanks
timer: fix misspelling of "decicycles"
Eliminate pointless 0/NULL initializers in AVCodec and similar declarations.
indeo3: cosmetics
md5proto: Fix order of operations.
dca: Replace oversized unused get_bits() with skip_bits_long().
Conflicts:
doc/APIchanges
libavformat/mmsh.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vc1: use an enum for Frame Coding Mode
doc: cleanup filter section
indeo3: error out if no motion vector is set.
x86inc: Flag shufps as an floating-point instruction for the AVX emulation code.
mpegaudio: do not use init_static_data() for initializing tables.
musepack: fix signed shift overflow in mpc_read_packet()
mov: Make format string match variable type.
wmavoice: Make format string match variable type.
vc1: select interlaced scan table by FCM element
Generalize RIFF INFO tag support; support reading INFO tag in wav
pthread: track thread existence in a separate variable.
Conflicts:
doc/filters.texi
libavcodec/pthread.c
libavformat/avi.c
libavformat/riff.c
libavformat/riff.h
libavformat/wav.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Interlaced videos can contain progressive frames too and now wrong scantable
is selected for them.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This fixes a compile error on mingw32 when using p->thread
directly (as if it were a pointer) to track thread existence,
because the type is opaque and may be a non-pointer.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Interlaced videos can contain progressive frames too and now wrong scantable
is selected for them.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (42 commits)
swscale: fix signed overflow in yuv2mono_X_c_template
snow: fix integer overflows
svq1enc: remove stale altivec-related hack
snow: fix signed overflow in byte to 32-bit replication
adx: rename ff_adx_decode_header() to avpriv_adx_decode_header()
avformat: add CRI ADX format demuxer
adx: add an ADX parser.
adx: move header decoding to ADX common code
adx: calculate the number of blocks in a packet
adx: define and use 2 new macro constants BLOCK_SIZE and BLOCK_SAMPLES
adx: check for unsupported ADX formats
adx: simplify encoding by using put_sbits()
adx: calculate correct LPC coeffs
adx: use 12-bit coefficients instead of 14-bit to avoid integer overflow
adx: simplify adx_decode() by using get_sbits() to read residual samples
adx: fix the data offset parsing in adx_decode_header()
adx: remove unneeded post-decode channel interleaving
adx: validate header values
adx: cosmetics: general pretty-printing and comment clean-up
adx: remove useless comments
...
Conflicts:
Changelog
libavcodec/cook.c
libavcodec/fraps.c
libavcodec/nuv.c
libavcodec/pthread.c
libavcodec/version.h
libavformat/Makefile
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The way these values are used, they should have an unsigned type.
A similar change was made for mpegvideo in cb66847.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This simplifies the decoder so it doesn't have to process an in-packet header
or handle arbitrary-sized packets. It also fixes decoding of files with large
headers.
Instead of using fixed coefficients, the correct way is to calculate the
coefficients using the highpass cutoff frequency from the ADX stream header
and the sample rate.
This multiplication can overflow the signed range but not the
unsigned. After right-shifting it will thus fit in the signed
range again.
Signed-off-by: Mans Rullgard <mans@mansr.com>
It makes more sense for a bit mask to use an unsigned type.
The change should be source and binary compatible on all
supported systems, hence micro version bump.
Fixes a few invalid shifts.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This is a hand-tuned version of the code with impossible parts of
the FASTDIV function ommitted.
2-5% faster overall on Cortex-A8.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
libavutil: add utility functions to simplify allocation of audio buffers.
libavutil: add planar sample formats and av_sample_fmt_is_planar()
avconv: fix segfault at EOF with delayed pictures
pcmdec: remove unneeded resetting of samples pointer
avconv: remove a now unused parameter from output_packet().
avconv: formatting fixes in output_packet()
avconv: declare some variables in blocks where they are used
avconv: use the same behavior when decoding audio/video/subs
bethsoftvideo: return proper consumed size for palette packets.
cdg: skip packets that don't contain a cdg command.
crcenc: add flags
avconv: use vsync 0 for AVFMT_NOTIMESTAMPS formats.
tiffenc: add a private option for selecting compression algorithm
md5enc: add flags
ARM: remove needless .text/.align directives
Conflicts:
doc/APIchanges
libavcodec/tiffenc.c
libavutil/avutil.h
libavutil/samplefmt.c
libavutil/samplefmt.h
tests/ref/fate/bethsoft-vid
tests/ref/fate/cdgraphics
tests/ref/fate/film-cvid-pcm-stereo-8bit
tests/ref/fate/mpeg2-field-enc
tests/ref/fate/nuv
tests/ref/fate/tiertex-seq
tests/ref/fate/tscc-32bit
tests/ref/fate/vmnc-32bit
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
aacdec: Fix PS in ADTS.
avconv: Consistently use PIX_FMT_NONE.
dsputil: use cpuflags in x86 emu_edge_core
dsputil: use movups instead of movdqu in ff_emu_edge_core_sse()
wma: initialize prev_block_len_bits, next_block_len_bits, and block_len_bits.
mov: Remove some redundant and obsolete comments.
Add libavutil/mathematics.h #includes for INFINITY
doxy: structure libavformat groups
doxy: introduce an empty structure in libavcodec
doxy: provide a start page and document libavutil
doxy: cleanup pixfmt.h
regtest: split video encode/decode tests into individual targets
ARM: add explicit .arch and .fpu directives to asm.S
pthread: do not touch has_b_frames
avconv: cleanup the transcoding loop in output_packet().
avconv: split subtitle transcoding out of output_packet().
avconv: split video transcoding out of output_packet().
avconv: split audio transcoding out of output_packet().
avconv: reindent.
avconv: move streamcopy-only code out of decoding loop.
...
Conflicts:
avconv.c
libavcodec/aaccoder.c
libavcodec/pthread.c
libavcodec/version.h
libavutil/audioconvert.h
libavutil/avutil.h
libavutil/mem.h
tests/ref/vsynth1/dv
tests/ref/vsynth1/mpeg2thread
tests/ref/vsynth2/dv
tests/ref/vsynth2/mpeg2thread
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* shariman/wmall:
call revert_cdlms()
Fix some loop conditions to prevent overreads
Initialize pred in lms_predict()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The initial values are not checked against the number of block sizes.
Initializing them to frame_len_bits will result in a block size index of 0
in these cases instead of something that might be out-of-range.
Fixes Bug 81.
This prevents build errors when compiler and assembler default
targets differ. Ideally each file would declare the highest
level it requires. This is however not easily possible as it
complicates assembling pre-armv6t2 code in Thumb-2 mode.
HAVE_NEON is used as indicator for ARMv7-A since no other
symbol exists for this and NEON is only available in this
variant.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Adding the thread count in frame level multithreading to has_b_frames
as an additional delay causes more problems than it solves.
For example inconsistent behaviour during timestamp calculation in
libavformat.
Thread count and frame level multithreading are both set by the user.
If the additional delay caused by frame level multithreading needs
to be considered in the calling code it has all information to take
it into account.
Should it become necessary to calculate a maximum delay inside
libavcodec it should be exported as its own field and not reusing
an existing field.
Based on a patch by Michael Niedermayer.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Some sample IFF ACBM files can be found here:
http://aminet.net/package/dev/basic/ABdemos
Thanks to Peter Ross for his help with this patch.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* mjbshaw/master:
Applied patches from Michael Niedermayer to clean up the code
Added support for J2K encoding with libopenjpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes NGS00144
Thanks to Phillip for suggestions to improve the patch.
Found-by: Phillip Langlois
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
A user who wishes to use default error concealment cannot set the
AV_EF_CRCCHECK flag because not every CRC in every format is a
reliable indicator of bitstream damage. In some formats crcrs
can be nonsensical in absence of any damage. We thus add the
AV_EF_CAREFUL flag in addition to the AV_EF_CRCCHECK flag to
allow a user to enable this reliable CRC check without having to
enable all CRC checks in all formats.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* shariman/wmall: (24 commits)
Clean-up
dump_int_buffer() to dump samples from a buffer
Implement revert_cdlms()
Doxy for reset_codec()
Store transient state and position of transient area
Implement use_high_update_speed() and use_normal_update_speed()
Initialize num_logged_tiles and remove unnecessary codes
Log index for each line of output
Log tile size
Output decoded residues
Replace placeholders with actual calls to clear_codec_buffers() and reset_codec()
Implement lms_update()
Implement lms_predict()
Implement reset_codec()
Add missing syntax elements to WmallDecodeCtx
Add .recent syntax element to cdlms struct
Implement clear_codec_buffers()
Add buffers to context necessary for reverting cdmls and mclms filter
Use avpriv_copy_bits() instead of ff_copy_bits()
Cosmetics
...
Conflicts:
libavcodec/wmalosslessdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A new field, AVCodecContext.internal is used to hold a new struct
AVCodecInternal, which has private fields that are not codec-specific and are
used by general libavcodec functions.
Moved internal_buffer, internal_buffer_count, and is_copy.
libavcodec/options.c:583: warning: assignment discards qualifiers from pointer
target type
libavcodec/options.c:589: warning: initialization discards qualifiers from
pointer target type
* qatar/master: (22 commits)
configure: add check for w32threads to enable it automatically
rtmp: do not hardcode invoke numbers
cinepack: return non-generic errors
fate-lavf-ts: use -mpegts_transport_stream_id option.
Add an APIchanges entry and a minor bump for avio changes.
avio: Mark the old interrupt callback mechanism as deprecated
avplay: Set the new interrupt callback
avconv: Set new interrupt callbacks for all AVFormatContexts, use avio_open2() everywhere
cinepak: remove redundant coordinate checks
cinepak: check strip_size
cinepak, simplify, use AV_RB24()
cinepak: simplify, use FFMIN()
cinepak: Fix division by zero, ask for sample if encoded_buf_size is 0
applehttp: Fix seeking in streams not starting at DTS=0
http: Don't use the normal http proxy mechanism for https
tls: Handle connection via a http proxy
http: Reorder two code blocks
http: Add a new protocol for opening connections via http proxies
http: Split out the non-chunked buffer reading part from http_read
segafilm: add support for raw videos
...
Conflicts:
avconv.c
configure
doc/APIchanges
libavcodec/cinepak.c
libavformat/applehttp.c
libavformat/version.h
tests/lavf-regression.sh
tests/ref/lavf/ts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The filled in refs cause corruptions in the video frame
for a long time after it should have recovered.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Note: Some of the previous patches have had two bugs that have been fixed
in this patch.
Signed-off-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegaudiodec: Don't use a nonexistent log context for av_dlog
avformat: Accept the ISO8601 separate format as input, too
avformat: Interpret times in ff_iso8601_to_unix_time as UTC
avutil: Add av_timegm as a public function
cinepak: Add another special case so that it can handle the following file:
lagarith: add some RGBA decoding support
lagarith: Add correct line prediction for RGB
Conflicts:
doc/APIchanges
libavcodec/cinepak.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
http://samples.mplayerhq.hu/V-codecs/CVID/bad_cinepak_frame_size.mov
This fix works around another work around which handles a different type
of odd Cinepak data.
Thanks to Matthew Hoops (clone2727 - gmail.com) for the sample and fix.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
http://samples.mplayerhq.hu/V-codecs/CVID/bad_cinepak_frame_size.mov
This fix works around another work around which handles a different type
of odd Cinepak data.
Thanks to Matthew Hoops (clone2727 - gmail.com) for the sample and fix.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
binkvideo: simplify and remove invalid shifts
pulse: compute frame_duration once and fix it
lavf: simplify format_child_class_next()
hwaccel: OS X Video Decoder Acceleration (VDA) support.
doc: add support for an optional navigation bar in texi2html pages
Conflicts:
configure
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/vda.c
libavcodec/vda.h
libavcodec/vda_h264.c
libavcodec/vda_internal.h
libavcodec/version.h
libavformat/options.c
libavutil/avutil.h
libavutil/pixfmt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
