This fixes builds with --disable-vfp.
Checking for the armv6 cpu flag is incorrect, since vfpv2 isn't
armv6 specific.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use two separate functions, depending on whether VFP/NEON is available.
This is set to require armv5te - it uses blx, which is only available
since armv5t, but we don't have a separate configure item for that.
(It also uses ldrd, which requires armv5te, but this could be avoided
if necessary.)
Signed-off-by: Martin Storsjö <martin@martin.st>
The previous check only caught sizes from -AV_INPUT_BUFFER_PADDING_SIZE
to -1.
This fixes ubsan runtime error: signed integer overflow: 2147483647 + 32
cannot be represented in type 'int'
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Both avio_skip and detect_unknown_subobject use int64_t for the size
parameter.
This fixes a segmentation fault due to infinite recursion.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Alexandra Hájková <alexandra.khirnova@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Otherwise invalid values are used unchecked in the next run.
This can cause NULL pointer dereferencing.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Alexandra Hájková <alexandra.khirnova@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Before 741b494fa8, when the reference list
modification description was invalid, the code would substitute the
corresponding reference from the initial ("default") reference list.
After that commit, it will just return an error.
Since there are apparently invalid samples in the wild that used to play
fine with the old code, it is a good idea to re-add some sort of error
resilience here. So, when the reference list modification results in a
missing frame, substitute a previous reference frame for it. The
relevant sample again decodes fine with the same output as previously.
Intel's Instruction Set Reference (as of September 2015) clearly states
that cvtpi2ps switches to MMX state. Actual CPUs do not switch if the
source is a memory location. The Instruction Set Reference from 1999
(Order Number 243191) describes this behaviour but all later versions
I've seen have make no distinction whether MMX registers or memory is
used as source.
The documentation for the matching SSE2 instruction to convert to double
(cvtpi2pd) was fixed (see the valgrind bug
https://bugs.kde.org/show_bug.cgi?id=210264).
It will take time to get a clarification and fixes in place. In the
meantime it makes sense to change ff_int32_to_float_fmul_scalar_sse to
be correct according to the documentation. The vast majority of users
will have SSE2 so a change to the SSE version has little effect.
Fixes fate-checkasm on x86 valgrind targets.
Valgrind 'bug' reported as https://bugs.kde.org/show_bug.cgi?id=357059
Check the full FPU tag word instead of only the lower half and simplify
the comparison.
Use upper-case function base name as macro name to instantiate both
checked_call variants.
The DCA core decoder converts integer coefficients read from the
bitstream to floats just after reading them (along with dequantization).
All the other steps of the audio reconstruction are done with floats
which makes the output for the DTS lossless extension (XLL)
actually lossy.
This patch changes the DCA core to work with integer coefficients
until QMF. At this point the integer coefficients are converted to floats.
The coefficients for the LFE channel (lfe_data) are not touched.
This is the first step for the really lossless XLL decoding.
Not every asm routine is expected clear the MMX state after returning.
It is however a requisite for testing floating point code in checkasm.
Annotate functions requiring cleanup with declare_func_emms() and issue
emms after the call. The remaining functions are checked for having a
cleared MMX state after return.
This macro unconditionally used out[-1], which causes an out of bounds
read, if out is the very beginning of the buffer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Due to this typo max_center can be too large, causing nlsf to be set to
too large values, which in turn can cause nlsf[i - 1] + min_delta[i] to
overflow to a negative value, which is not allowed for nlsf and can
cause an out of bounds read in silk_lsf2lpc.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Quite a bit faster than int32_to_float_fmul_array8_c calling
ff_int32_to_float_fmul_scalar_neon through FmtConvertContext.
Number of cycles per int32_to_float_fmul_array8 call while decoding
padded.dts on exynos5422:
before after change
cortex-a7: 1270 951 -25%
cortex-a15: 434 285 -34%
checkasm --bench cycle counts: cortex-a15 cortex-a7
int32_to_float_fmul_array8_c: 1730.4 4384.5
int32_to_float_fmul_array8_neon_c: 571.5 1694.3
int32_to_float_fmul_array8_neon: 374.0 1448.8
Interesting are the differences between
int32_to_float_fmul_array8_neon_c and int32_to_float_fmul_array8_neon.
The former is current behaviour of calling
ff_int32_to_float_fmul_scalar_neon repeatedly from the c function,
The raw numbers differ since checkasm uses different lengths than the
dca decoder.
~25% faster dts decoding overall. The checkasm CPU cycles numbers are
not that useful since synth_filter_float() calls FFTContext.imdct_half().
cortex-a57 cortex-a53
synth_filter_float_c: 1866.2 3490.9
synth_filter_float_neon: 915.0 1531.5
With fftc.imdct_half forced to imdct_half_neon:
cortex-a57 cortex-a53
synth_filter_float_c: 1718.4 3025.3
synth_filter_float_neon: 926.2 1530.1
The vector mode was deprecated in ARMv7-A/VFPv3 and various cpu
implementations do not support it in hardware. Vector mode code will
depending the OS either be emulated in software or result in an illegal
instruction on cpus which does not support it. This was not really
problem in practice since NEON implementations of the same functions are
preferred. It will however become a problem for checkasm which tests
every cpu flag separately.
Since this is a cpu feature newer cpu do not support anymore the
behaviour of this flag differs from the other flags. It can be only
activated by runtime cpu feature selection.
The ISB (instruction synchronization barrier) might be too heavy for
START/STOPTIMER use but should be more accurate in checkasm where the
timing overhead is subtracted.
Include macros.h explicitly in common.h so that external code using
FFALIGN does not break. It was already implicitly included through
version.h. Include macros.h in lls.h and internal.h for FFALIGN.
lls.h was including common.h only for FFALIGN and internal.h was
missing the include for FFALIGN. `make checkheaders` did not catch it
because it's an internal header.
So far an AC-3 elementary stream is refered to in the PMT according to
System A (ATSC). However System B (DVB) has a different way to signal an AC-3
ES within the PMT. This different way can be enabled by a new flag. The flag is
more generally named 'system_b' as there are further differences between ATSC
and DVB (e.g. the signalling of E-AC-3) which should then also be covered by it
in the future.
Bug-Id: 73
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
That buffer is read only and marking it accordingly let
the user passing a constant buffer to it without having
a const-correctness warning.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
