Previously, it would not be read if refdist_flag was not set, however
according to the spec and the reference decoder, it should always be read.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* qatar/master: (22 commits)
wma: Clip WMA1 and WMA2 frame length to 11 bits.
movenc: Don't require frame_size to be set for modes other than mov
doc: Update APIchanges with info on muxer flushing
movenc: Reindent a block
tools: Remove some unnecessary #undefs.
rv20: prevent calling ff_h263_decode_mba() with unset height/width
tools: K&R reformatting cosmetics
Ignore generated aviocat and ismindex tools.
build: Automatically include architecture-specific library Makefile snippets.
indeo5: prevent null pointer dereference on broken files
pktdumper: Use usleep instead of sleep
cosmetics: Remove some unnecessary block braces.
Drop unnecessary prefix from *sink* variable and struct names.
Add a tool for creating smooth streaming manifests
movdec: Calculate an average bit rate for fragmented streams, too
movenc: Write the sample rate instead of time scale in the stsd atom
movenc: Add a separate ismv/isma (smooth streaming) muxer
movenc: Allow the caller to decide on fragmentation
libavformat: Add a flag for muxers that support write_packet(NULL) for flushing
movenc: Add support for writing fragmented mov files
...
Conflicts:
Changelog
cmdutils.c
cmdutils.h
doc/APIchanges
ffmpeg.c
ffplay.c
libavfilter/Makefile
libavformat/Makefile
libavformat/avformat.h
libavformat/movenc.c
libavformat/movenc.h
libavformat/version.h
tools/graph2dot.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The MDCT buffers in the decoder are only sized for up to 11 bits. The
reverse engineered documentation for WMA1/2 headers say that that for
all samplerates above 32kHz 11 bits are used. 12 and 13 bit support
were added for WMAPro. I was unable to make any Microsoft tools generate
a test file at a samplerate above 48kHz.
Discovered by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
This fixes a double release of the current frame on deinit.
Fixes CVE-2011-3934
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The index of the motion vector has to be checked before being
multiplied by 2 for the array index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (23 commits)
aacenc: Fix identification padding when the bitstream is already aligned.
aacenc: Write correct length for long identification strings.
aud: remove unneeded field, audio_stream_index from context
aud: fix time stamp calculation for ADPCM IMA WS
aud: simplify header parsing
aud: set pts_wrap_bits to 64.
cosmetics: indentation
aud: support Westwood SND1 audio in AUD files.
adpcm_ima_ws: fix stereo decoding
avcodec: add a new codec_id for CRYO APC IMA ADPCM.
vqa: remove unused context fields, audio_samplerate and audio_bits
vqa: clean up audio header parsing
vqa: set time base to frame rate as coded in the header.
vqa: set packet duration.
vqa: use 1/sample_rate as the audio stream time base
vqa: set stream start_time to 0.
lavc: postpone the removal of AVCodecContext.request_channels.
lavf: postpone removing av_close_input_file().
lavc: postpone removing old audio encoding and decoding API
avplay: remove the -er option.
...
Conflicts:
Changelog
libavcodec/version.h
libavdevice/v4l.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Although it has been deprecated for a long time, its intended
replacement (request_channel_layout) is not actually used anywhere, so
request_channels is currently the only way to access that functionality.
Previously this was just checked in case of slice threads,
but frame threads do not support this either currently.
Making them support this is of course the long term goal
Fixes bug155
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Remove ffmpeg.
aacenc: Simplify windowing
aacenc: Move saved overlap samples to the beginning of the same buffer as incoming samples.
aacenc: Deinterleave input samples before processing.
aacenc: Store channel count in AACEncContext.
aacenc: Move Q^3/4 calculation to it's own table
aacenc: Request normalized float samples instead of converting s16 samples to float.
aacpsy: Replace an if with FFMAX in LAME windowing.
aacenc: cosmetics, replace 'rd' with 'bits' in codebook_trellis_rate to make it more clear what is being calculated.
aacpsy: cosmetics, change a FIXME to a NOTE about subshort comparisons
aacenc: cosmetics: move init() and end() to the bottom of the file.
aacenc: aac_encode_init() cleanup
XWD encoder and decoder
vc1: don't read the interpfrm and bfraction elements for interlaced frames
mxfdec: fix memleak on mxf_read_close()
westwood: split the AUD and VQA demuxers into separate files.
Conflicts:
.gitignore
Changelog
Makefile
configure
doc/ffmpeg.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/aacenc.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
libavformat/img2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous implementation assumed that a new picture would always
supersede the previous picture. Similarly, presentation segments
were assumed to pertain to the most-recently-read picture.
However, each presentation segment may refer to 0 or more pictures
by their ID. Picture IDs may repeat, and a repeated picture ID
indicates that the old picture for that ID is no longer needed
and may be discarded.
The new implementation allocates a buffer with one slot for each
possible picture ID (the picture ID is a 16-bit field) and
properly decodes presentation segments so that all relevant
pictures are output upon encountering a display segment.
Given that most PGS streams are unlikely to use more than a small
fraction of the available picture IDs, it would probably be better
to use a more memory-efficient data structure. I'm lazy though, so
I leave this to a more motivated individual.
I've tested the code with MKV files in VLC (a recent revision from
their git repo) and with HandBrake (a version that I hacked up to
use ffmpeg's PGS subtitle decoder).
Review-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes memory corruption when seeking in broken streams.
a random mpeg4 in nut file was used to debug.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This matches the spec as well as the reference decoder, and fixes a bug
with interlaced frame decoding.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* qatar/master: (25 commits)
riff: fix invalid av_freep() calls on EOF in ff_read_riff_info
pam: Fix a typo that broke writing and reading PAM files.
mxfdec: fix memleak on av_realloc failures
mxfdec: Do not parse slices or DeltaEntryArrays.
mxfdec: hybrid demuxing/seeking solution
mxfdec: Add Avid's essence element key.
mfxdec: Separate mxf_essence_container_uls for audio and video.
mxfdec: Compute packet offsets properly.
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack.
mxfdec: use av_dlog() for 'no corresponding source package found'
mxfdec: Make mxf->partitions sorted by offset.
mxfdec: parse ThisPartition
mxfdec: Speed up metadata and index parsing.
mxfdec: Make sure DataDefinition is consistent between material track and source track.
mxfdec: add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
mxfdec: Add hack that adjusts the n_delta calculation when system items are present.
mxfdec: Parse IndexTableSegments and convert them into AVIndexEntry arrays.
mxfdec: Move FooterPartition to MXFContext and make sure it is never zero.
mxfdec: check return value of avio_seek
mxfdec: skip to end of structural sets
...
Conflicts:
configure
libavcodec/pnm.c
libavformat/mxfdec.c
libavformat/riff.c
libavformat/rtsp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This was a regression that came in when I switched to using the
h.264 annex b filter all the time. As the filter modifies extradata,
its use violates the statelessness assumption that exists in the
'ffmpeg' command line tool, and maybe elsewhere. It assumes that
a docoder can be reinitalised and pointed to an existing stream and
get the same results.
For now, the only way to meet this requirement is to backup the
extradata.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
the written length was off by 2 causing aac decoders to fail with the data.
lucky the encoder was marked as experimental and not used much
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtpdec: Use our own SSRC in the SDES field when sending RRs
Finalize changelog for 0.8 Release
Prepare for 0.8 Release
threads: change the default for threads back to 1
threads: update slice_count and slice_offset from user context
aviocat: Remove useless includes
doc/APIChanges: fill in missing dates and hashes
Revert "avserver: fix build after the next bump."
mpegaudiodec: switch error detection check to AV_EF_BUFFER
lavf: rename fer option and document resulting (f_)err_detect options
lavc: rename err_filter option to err_detect and document it
mpegvideo: fix invalid memory access for small video dimensions
movenc: Reorder entries in the MOVIentry struct, for tigheter packing
rtsp: Remove extern declarations for variables that don't exist
aviocat: Flush the output before closing
Conflicts:
Changelog
RELEASE
libavcodec/mpegaudiodec.c
libavcodec/pthread.c
libavformat/options.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Using threaded decoding by default breaks backward compatibility if
AVHWAccel is used or if an appliction sets threadunsafe callbacks.
Avconv and avplay still use -threads auto if not specified.
When either video dimension is only one macroblock, subtractions
based on v_edge_pos and the macroblock size may be negative. In
that situation, an unsigned comparison isn't sufficent to test for
MV overruns, because a limit of (unsigned)-1 will let any other
value pass.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
That way all mix levels as exported by the parser
will have the same meaning.
Previously the 3bit center mix level for eac3 was
used to index in a 4 entry table leading to out of array reads.
this change removes the table and offsets the ac3 variable by 4
so it matches the meanings for eac3 except the reserved case.
The reserved case is then explicitly handled.
Idea-by: Justin Ruggles <justin.ruggles@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Add a tool that uses avio to read and write, doing a plain copy of data
ARM: fix build with FFT enabled and MDCT disabled
lavf: force single-threaded decoding in avformat_find_stream_info
avidec: migrate last of lavf from FF_ER_* to AV_EF_*
avserver: fix build after the next bump.
Conflicts:
libavformat/Makefile
libavformat/avidec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpeg12: check for available bits to avoid an infinite loop
fate: add some shorthands to run groups of tests
fate: Give some tests more sensible names.
cosmetics: Rename ffsink to avsink.
Conflicts:
avconv.c
cmdutils.c
cmdutils.h
ffmpeg.c
ffplay.c
tests/fate/audio.mak
tests/fate/demux.mak
tests/fate/dpcm.mak
tests/fate/image.mak
tests/fate/lossless-audio.mak
tests/fate/lossless-video.mak
tests/fate/microsoft.mak
tests/fate/pcm.mak
tests/fate/real.mak
tests/fate/screen.mak
tests/fate/video.mak
tests/fate/voice.mak
tests/fate/wma.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This one was missed in the previous fraps fix, the
allocation is exactly the same in both cases.
Fixes fraps-v5 under valgrind.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This is needed in case the get_buffer() callback doesnt set
width/height.
Ideally all decoders would make calls through some wraper
to the callbacks and that wraper would call ff_init_buffer_info()
But until thats done, the default reget buffer must call this
itself as it needs the values for the changed size check later.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
tta: cast output data pointer to the correct type
avconv: fix -frames for video encoders with delay.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The same as av_fast_malloc but uses av_mallocz and keeps extra
always-0 padding.
This does not mean the memory will be 0-initialized after each call,
but actually only after each growth of the buffer.
However this makes sure that
a) all data anywhere in the buffer is always initialized
b) the padding is always 0
c) the user does not have to bother with adding the padding themselves
Fixes another valgrind warning about use of uninitialized data,
this time with fate-vsynth1-jpegls.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This combination is quite odd and almost certainly a bug if
it happens.
Reviewed-by: Justin Ruggles <justin.ruggles@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rv34: add NEON rv34_idct_add
rv34: 1-pass inter MB reconstruction
add SMJPEG muxer
avformat: split out common SMJPEG code
pictordec: Use bytestream2 functions
avconv: use avcodec_encode_audio2()
pcmenc: use AVCodec.encode2()
avcodec: bump minor version and add APIChanges for the new audio encoding API
avcodec: Add avcodec_encode_audio2() as replacement for avcodec_encode_audio()
avcodec: add a public function, avcodec_fill_audio_frame().
rv34: Intra 16x16 handling
rv34: Inter/intra MB code split
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/pictordec.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/rv34dsp.asm
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Overall almost 4% faster, idct_add down from 350 to 85 cycles, idct_dc_add
down from 83 to 30 cycles.
squash: rv34 idct rearrange partial register loads
This reworks the frame skipping code such that the reference
buffers are still updated according to the header.
However it also ensures that the current frame will not end
up in any reference buffer.
Also fixes a hang with frame-multithreading, probably because
get_buffer was already called and would have reset the progress,
however the frame could remain in framep due to the missing update
(or it could be assigned to next_framep and a skip_frame skip would
then write it into framep - there might be even more failure modes).
Sample might become available at samples/nsv/vp8.nsv
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This is required by the spec and fixes video-1frag.ogg.48.ogg. (FPE)
Based on the debuging work of Oana Stratulat and ubitux.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows audio encoders to optionally take an AVFrame as input and write
encoded output to an AVPacket.
This also adds AVCodec.encode2() which will also be usable by video and
subtitle encoders once support is implemented in the public functions.
* qatar/master:
fate: split ADPCM and DPCM test references into separate files.
mov, mxfdec: Employ more meaningful return values.
lavc: Relax API strictness in avcodec_decode_audio3 with a custom get_buffer()
wavpack: fix clipping for 32-bit lossy mode
vb: Use bytestream2 functions
Conflicts:
libavcodec/utils.c
libavcodec/vb.c
libavformat/mxfdec.c
tests/fate/dpcm.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Extract processing of intra 16x16 blocks from intra macroblock
processing.
Also implement a function performing inverse transform and block
reconstruction for DC-only blocks in 1 pass instead of 2.
Split inter/intra macroblock handling code. This will allow further
optimizations such as performing inverse transform and block reconstruction
in a single pass as well as specialize code.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Do not fail audio decoding with avcodec_decode_audio3 if user has set a
custom get_buffer. Strictly speaking, this was never allowed by the API,
but it seems that some software packages did so anyways. In order to
unbreak applications (cf. http://bugs.debian.org/655890), this change
clarifies the API and overrides the custom get_buffer() with the defaults.
This change is inspired by a similar
commit (c3846e3eba) in FFmpeg.
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Reference decoder clips data before shifting it to final range and also
forces 32-bit lossy mode to be actually 24-bit lossy mode in order to be
able to perform proper clipping.
This is not a real error and memsetting always even when the
size did not change is overkill, but it still should be
an acceptable trade-off.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
sgidec: Use bytestream2 functions to prevent buffer overreads.
cosmetics: Move static and inline attributes to more standard places.
configure: provide libavfilter/version.h header to get_version()
swscale: change yuv2yuvX code to use cpuflag().
libx264: Don't leave max_b_frames as -1 if the user didn't set it
FATE: convert output to rgba for the targa tests which currently output pal8
fate: add missing reference files for targa tests in 9c2f9b0e2
FATE: enable the 2 remaining targa conformance suite tests
targa: add support for rgb555 palette
FATE: fix targa tests on big-endian systems
Conflicts:
libavcodec/sgidec.c
libavcodec/targa.c
libswscale/x86/output.asm
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
At the very least this should fix warnings about unused static
functions if one or more of these is not defined.
However even compilation might be broken if the compiler does
not optimize the function away completely.
This actually happens in case of the AVX function, since the
function pointer is used in an assignment that is not under
an #if and thus probably only optimized away after the function
was already marked as used.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
We do this for all other codec_tag checks in mpegvideo*/h26*
doing it here too makes the code more consistent.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
While we correctly "register" the side data when we split it,
the application (in this case FFmpeg) might not update the
AVPacket pool it uses to finally free the packet, thus
causing a leak.
This also makes the av_dup_packet unnecessary which could
cause an even worse leak in this situation.
Also change the code to not modify the user-provide AVPacket at all.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
FATE: add tests for targa
ARM: fix Thumb-mode simple_idct_arm
ARM: 4-byte align start of all asm functions
rgb2rgb: rgb12to15()
swscale-test: fix stack overread.
swscale: fix invalid conversions and memory problems.
cabac: split cabac.h into declarations and function definitions
cabac: Mark ff_h264_mps_state array as static, it is only used within cabac.c.
cabac: Remove ff_h264_lps_state array.
Conflicts:
libswscale/rgb2rgb.h
libswscale/swscale_unscaled.c
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some of these encoders may produce invalid bitstreams, which should not
be done without the user knowing.
Some of these decoders may be unfinished and may contain security issues.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
max_b_frames is initialized to -1 for libx264, to allow
distinguishing between an explicit user set 0 and a default not
touched 0 (see bb73cda2).
If max_b_frames is left as -1, this affects dts generation (where
expressions like max_b_frames != 0 are used), so make sure it is
left at the default 0 after the libx264 init function returns.
This avoids unnecessarily producing dts != pts when using
profile=baseline.
Signed-off-by: Martin Storsjö <martin@martin.st>
The alignment directive must obviously precede the label.
This was never noticed in ARM mode since the location is
already aligned there.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Due to apprent bugs in the GNU assembler and/or linker, relocations
can be incorrectly processed if the alignment of a Thumb instruction
is changed in the output file compared to the input object.
This fixes crashes in h264 decoding with Thumb enabled. No effect in
ARM mode since everything is 4-byte aligned there.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (21 commits)
utils: Check for extradata size overflows.
ARM: rv34: fix asm syntax in dc transform functions
avio: Fix the value of the deprecated URL_FLAG_NONBLOCK
rv34: fix and optimise frame dependency checking
rv34: NEON optimised dc only inverse transform
avprobe: use avio_size() instead of deprecated AVFormatContext.file_size.
ffmenc: remove references to deprecated AVFormatContext.timestamp.
lavf: undeprecate read_seek().
avserver: remove code using deprecated CODEC_CAP_PARSE_ONLY.
lavc: replace some remaining FF_I_TYPE with AV_PICTURE_TYPE_I
lavc: ifdef out parse_only AVOption
nellymoserdec: SAMPLE_FMT -> AV_SAMPLE_FMT
mpegvideo_enc: ifdef out/replace references to deprecated codec flags.
riff: remove references to sonic codec ids
indeo4: add some missing static and const qualifiers
rv34: DC-only inverse transform
avconv: use AVFrame.width/height/format instead of corresponding AVCodecContext fields
lavfi: move version macros to a new installed header version.h
vsrc_buffer: release the buffer on uninit.
rgb2rgb: rgb12tobgr12()
...
Conflicts:
avconv.c
doc/APIchanges
ffprobe.c
libavfilter/Makefile
libavfilter/avfilter.h
libswscale/rgb2rgb.c
libswscale/rgb2rgb.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes standalone compilation of some decoders with --disable-optimizations.
cabac.h defines some inline functions that use symbols from cabac.c. Without
optimizations these inline functions are not eliminated and linking fails with
references to non-existing symbols.
Splitting the inline functions off into their own header and only #including
it in the places where the inline functions are used allows #including cabac.h
from anywhere without ill effects.
The sporadic threading errors during fate-rv30 were caused by calling
ff_thread_await_progress with mb row -1 as argument. That returns
immediately since progress is initialized to -1. Not yet computed
motion vectors from the reference could be used for the first
macroblocks.
When decoding coefficients, detect whether the block is DC-only, and take
advantage of this knowledge to perform DC-only inverse transform.
This is achieved by:
- first, changing the 108x4 element modulo_three_table into a 108 element
table (kind of base4), and accessing each value using mask and shifts.
- then, checking low bits for 0 (as they represent the presence of higher
frequency coefficients)
Also provide x86 SIMD code for the DC-only inverse transform.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* qatar/master:
fft: init functions with INIT_XMM/YMM.
pcmenc: set frame_size to 0.
gsm demuxer: use generic seeking instead of a gsm-specific function.
gsm demuxer: return packets with only 1 gsm block at a time.
avcodec: add GSM parser
doc: Replace ffmpeg references in avserver config file by avconv.
doc: Fix names of av_log color environment variables.
Fix a bunch of platform name and other typos.
Add some missing changelog entries and release 0.8_beta2
No longer build libpostproc by default
wtv: fix memleaks during normal operation
threads: add CODEC_CAP_AUTO_THREADS for libvpx and xavs
Conflicts:
Changelog
RELEASE
cmdutils.c
configure
doc/ffserver.conf
doc/platform.texi
ffplay.c
libavcodec/Makefile
libavcodec/version.h
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is required to handle clobbering of XMM registers on Win64
correctly. Fixes FFT and all tests depending on FFT on Win64.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
The WAVE demuxer returns packets with many blocks per frame, which needs to be
parsed into single blocks. This has a side-effect of fixing the timestamps.
* qatar/master: (22 commits)
rv34: frame-level multi-threading
mpegvideo: claim ownership of referenced pictures
aacsbr: prevent out of bounds memcpy().
ipmovie: fix pts for CODEC_ID_INTERPLAY_DPCM
sierravmd: fix audio pts
bethsoftvideo: Use bytestream2 functions to prevent buffer overreads.
bmpenc: support for PIX_FMT_RGB444
swscale: fix crash in fast_bilinear code when compiled with -mred-zone.
swscale: specify register type.
rv34: use get_bits_left()
avconv: reinitialize the filtergraph on resolution change.
vsrc_buffer: error on changing frame parameters.
avconv: fix -copyinkf.
fate: Update file checksums after the mov muxer change in a78dbada55
movenc: Don't store a nonzero creation time if nothing was set by the caller
bmpdec: support for rgb444 with bitfields compression
rgb2rgb: allow conversion for <15 bpp
doc: fix stray reference to FFmpeg
v4l2: use C99 struct initializer
v4l2: poll the file descriptor
...
Conflicts:
avconv.c
libavcodec/aacsbr.c
libavcodec/bethsoftvideo.c
libavcodec/kmvc.c
libavdevice/v4l2.c
libavfilter/vsrc_buffer.c
libswscale/swscale_unscaled.c
libswscale/x86/input.asm
tests/ref/acodec/alac
tests/ref/acodec/pcm_s16be
tests/ref/acodec/pcm_s24be
tests/ref/acodec/pcm_s32be
tests/ref/acodec/pcm_s8
tests/ref/lavf/mov
tests/ref/vsynth1/dnxhd_1080i
tests/ref/vsynth1/mpeg4
tests/ref/vsynth1/qtrle
tests/ref/vsynth1/svq1
tests/ref/vsynth2/dnxhd_1080i
tests/ref/vsynth2/mpeg4
tests/ref/vsynth2/qtrle
tests/ref/vsynth2/svq1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* richardpl/sws:
rgb2rgb: remove unused bgr8torgb8()
rgb2rgb: rgb12tobgr12()
rgb2rgb: allow conversion for <15 bpp
bmpenc: support for PIX_FMT_RGB444
bmpdec: support for rgb444 with bitfields compression
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Statistics for bourne.rmvb -an -f null
1 thread: 37.12s user 0.03s system 99% cpu 37.174 total
2 threads: 47.63s user 0.24s system 185% cpu 25.807 total
4 threads: 41.21s user 0.30s system 327% cpu 12.674 total
Under certain conditions pictures could be released before they were
returned with frame-threading. Broken mv computation in the upcoming
rv34 frame-threading patch was caused by this.
To prevent contexts from running out of available pictures the loop
releasing "unused" pictures has to be run for B frames too.
Fixes Libav Bug 195.
This doesn't make the code handle sample rate or upsample/downsample
change properly but this is still a good sanity check.
Based on change by Michael Niedermayer.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
* qatar/master:
fate: Add tests for more AAC features.
aacps: Add missing newline in error message.
fate: Add tests for vc1/wmapro in ism.
aacdec: Add a fate test for 5.1 channel SBR.
aacdec: Turn off PS for multichannel files that use PCE based configs.
cabac: remove put_cabac_u/ueg from cabac-test.
swscale: RGB4444 and BGR444 input
FATE: add test for xWMA demuxer.
FATE: add test for SMJPEG demuxer and associated IMA ADPCM audio decoder.
mpegaudiodec: optimized iMDCT transform
mpegaudiodec: change imdct window arrangment for better pointer alignment
mpegaudiodec: move imdct and windowing function to mpegaudiodsp
mpegaudiodec: interleave iMDCT buffer to simplify future SIMD implementations
swscale: convert yuy2/uyvy/nv12/nv21ToY/UV from inline asm to yasm.
FATE: test to exercise WTV demuxer.
mjpegdec: K&R formatting cosmetics
swscale: K&R formatting cosmetics for code examples
swscale: K&R reformatting cosmetics for header files
FATE test: cvid-grayscale; ensures that the grayscale Cinepak variant is exercised.
Conflicts:
libavcodec/cabac.c
libavcodec/mjpegdec.c
libavcodec/mpegaudiodec.c
libavcodec/mpegaudiodsp.c
libavcodec/mpegaudiodsp.h
libavcodec/mpegaudiodsp_template.c
libavcodec/x86/Makefile
libavcodec/x86/imdct36_sse.asm
libavcodec/x86/mpegaudiodec_mmx.c
libswscale/swscale-test.c
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/x86/swscale_template.c
tests/fate/demux.mak
tests/fate/microsoft.mak
tests/fate/video.mak
tests/fate/wma.mak
tests/ref/lavfi/pixfmts_scale
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The functions are not used in any part of Libav, therefore testing them in the
cabac-test is unnecessary. Since this makes them unused, remove the functions.
Using an always_inline function makes the memcpy length a constant,
any reasonable compiler will replace it by a single mov instruction
without us having to duplicate the actual code.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
>> time ./avconv -i file.avi -f null -
Before : real 0m7.784s
After : real 0m3.662s
Tested on a Intel Core i3 Processor (2 cores, 4 threads).
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master: (29 commits)
cabac: Move code only used within the CABAC test program into the test program.
vp56: Drop unnecessary cabac.h #include.
h264-test: Initialize AVCodecContext.av_class.
build: Skip compiling network.h and rtsp.h if networking is not enabled.
cosmetics: drop some pointless parentheses
Disable annoying warning without changing behavior
faq: Solutions for common problems with sample paths when running FATE.
avcodec: attempt to clarify the CODEC_CAP_DELAY documentation
avcodec: fix avcodec_encode_audio() documentation.
FATE: xmv-demux test; exercise the XMV demuxer without decoding the perceptual codecs inside.
vqf: recognize more metadata chunks
FATE test: BMV demuxer and associated video and audio decoders.
FATE: indeo4 video decoder test.
FATE: update xxan-wc4 test to a sample with more code coverage.
Change the recent h264_mp4toannexb bitstream filter test to output to an elementary stream rather than a program stream.
g722enc: validate AVCodecContext.trellis
g722enc: set frame_size, and also handle an odd number of input samples
g722enc: split encoding into separate functions for trellis vs. no trellis
mpegaudiodec: Use clearer pointer math
tta: Fix returned error code at EOF
...
Conflicts:
libavcodec/h264.c
libavcodec/indeo3.c
libavcodec/interplayvideo.c
libavcodec/ivi_common.c
libavcodec/libxvidff.c
libavcodec/mpegvideo.c
libavcodec/ppc/mpegvideo_altivec.c
libavcodec/tta.c
libavcodec/utils.c
libavfilter/vsrc_buffer.c
libavformat/Makefile
tests/fate/indeo.mak
tests/ref/acodec/g722
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
flicvideo: fix invalid reads
vorbis: Avoid some out-of-bounds reads
vqf: add more known extensions
cabac: remove unused function renorm_cabac_decoder
h264: Only use symbols from the SVQ3 decoder under proper conditionals.
add bytestream2_tell() and bytestream2_seek() functions
parsers: initialize MpegEncContext.slice_context_count to 1
spdifenc: use special alignment for DTS-HD length_code
Conflicts:
libavcodec/flicvideo.c
libavcodec/h264.c
libavcodec/mpeg4video_parser.c
libavcodec/vorbis.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (21 commits)
ipmovie: do not read audio packets before the codec is known
truemotion2: check size before GetBitContext initialisation
avio: Only do implicit network initialization for network protocols
avio: Add an URLProtocol flag for indicating that a protocol uses network
adpcm: ADPCM Electronic Arts has always two channels
matroskadec: Fix a bug where a pointer was cached to an array that might later move due to a realloc()
fate: Add missing reference file from 9b4767e4.
mov: Support MOV_CH_LAYOUT_USE_DESCRIPTIONS for labeled descriptions.
4xm: Prevent buffer overreads.
mjpegdec: parse RSTn to prevent skipping other data in mjpeg_decode_scan
vp3: add fate test for non-zero last coefficient
vp3: fix streams with non-zero last coefficient
swscale: remove unused U/V arguments from yuv2rgb_write().
timer: K&R formatting cosmetics
lavf: cosmetics, reformat av_read_frame().
lavf: refactor av_read_frame() to make it easier to understand.
Report an error if pitch_lag is zero in AMR-NB decoder.
Revert "4xm: Prevent buffer overreads."
4xm: Prevent buffer overreads.
4xm: pass the correct remaining buffer size to decode_i2_frame().
...
Conflicts:
libavcodec/4xm.c
libavcodec/mjpegdec.c
libavcodec/truemotion2.c
libavformat/ipmovie.c
libavformat/mov_chan.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The mpeg4 video, H264 and VC-1 parser hold (directly or indirectly)
a MpegEncContext in their private context. Since they do not call the
common mpegvideo init function slice_context_count has explicitly set
to 1.
Prevents a null pointer dereference in the h264 parser and fixes
bug 193.
Author: Mans Rullgard <mans@mansr.com>
Date: Sun Dec 11 21:41:59 2011 +0000
x86: cabac: replace explicit memory references with "m" operands
This replaces the explicit offset(reg) memory references with
"m" operands for the same locations. As a result, one fewer
register operand is needed for these inline asm statements.
This change appears to have broken compilation on darwin, and subsequent
fixes by martin (which did not fix compilation) removed the register
advantage, thus this change seems not a good idea to keep.
See: http://fate.ffmpeg.org/log.cgi?time=20120103122446&log=compile&slot=i386-darwin-llvm-gcc-4.2.1
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This issue was discovered while decoding the FATE sample vqa/ws_snd.vqa.
For some unknown reason only audio decoding is tested by FATE for that file,
but not video.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Not all applications (e.g. MPlayer) set block_align, and
when using a different demuxer it might not even be
easily available.
So fall back to selecting mode based on bit rate as before
if block_align has not useful value.
It can't be worse than failing to decode completely.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Check explicitly if enough bits are left to prevent an infinite loop
when the bitstream buffer is not followed by zero-padding.
Based on patches by Michael Niedermayer <michaelni@gmx.at>.
frame_size is the number of bytes left in the packet, so if we are passing
buf-4 we can safely read frame_size+4 bytes.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master: (46 commits)
mtv: Make sure audio_subsegments is not 0
v4l2: use V4L2_FMT_FLAG_EMULATED only if it is defined
avconv: add symbolic names for -vsync parameters
flvdec: Fix compiler warning for uninitialized variables
rtsp: Fix compiler warning for uninitialized variable
ulti: convert to new bytestream API.
swscale: Use standard multiple inclusion guards in ppc/ header files.
Place some START_TIMER invocations in separate blocks.
v4l2: list available formats
v4l2: set the proper codec_tag
v4l2: refactor device_open
v4l2: simplify away io_method
v4l2: cosmetics
v4l2: uniform and format options
v4l2: do not force interlaced mode
avio: exit early in fill_buffer without read_packet
vc1dec: fix invalid memory access for small video dimensions
rv34: fix invalid memory access for small video dimensions
rv34: joint coefficient decoding and dequantization
avplay: Don't call avio_set_interrupt_cb(NULL)
...
Conflicts:
Changelog
avconv.c
doc/APIchanges
doc/indevs.texi
libavcodec/adxenc.c
libavcodec/dnxhdenc.c
libavcodec/h264.c
libavdevice/v4l2.c
libavformat/flvdec.c
libavformat/mtv.c
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
decoding.
BUG=100543
Review URL: http://codereview.chromium.org/8365014
This fixes 25% of CVE-2011-3893
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes compilation failures related to START_TIMER/STOP_TIMER macros and
-Werror=declaration-after-statement. START_TIMER declares variables and thus
may not be placed after statements outside of a new block.
For small video dimensions, these calculations of the upper bound
for pixel access may have a negative result. Using an unsigned
comparison to bound a potentially negative value only works if
the greater operand is non-negative. Fixed by doing edge emulation
when the upper bound is probably negative, everywhere that this
pattern appears.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
For small video dimensions calculations of the upper bound for pixel
access may result in negative value. Using an unsigned comparison
works only if the greater operand is non-negative. This is fixed by
doing edge emulation explicitly for such conditions.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Perform dequantization while decoding coefficients instead of performing it
on the entire coefficients buffer.
Since quantized coefficients are very sparse, this usually causes a small
speedup. Speedup of around 1% on Panda board compared to the removed here
neon code. Global speedup is probably around 3%.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
This fixes compilation failures related to START_TIMER/STOP_TIMER macros and
-Werror=declaration-after-statement. START_TIMER declares variables and thus
may not be placed after statements outside of a new block.
* qatar/master:
fate: add dxtory test
adx_parser: rewrite.
adxdec: Validate channel count to fix a division by zero.
adxdec: Do not require extradata.
cmdutils: K&R reformatting cosmetics
alacdec: implement the 2-pass prediction type.
alacenc: implement the 2-pass prediction type.
alacenc: do not generate invalid multi-channel ALAC files
alacdec: fill in missing or guessed info about the extradata format.
utvideo: proper median prediction for interlaced videos
lavu: bump lavu minor for av_popcount64
dca: K&R formatting cosmetics
dct: K&R formatting cosmetics
lavf: flush decoders in avformat_find_stream_info().
win32: detect number of CPUs using affinity
Add av_popcount64
snow: Restore three mistakenly removed casts.
Conflicts:
cmdutils.c
doc/APIchanges
libavcodec/adx_parser.c
libavcodec/adxdec.c
libavcodec/alacenc.c
libavutil/avutil.h
tests/fate/screen.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* shariman/wmall:
Fix audio output
Suppress dumping of residues buffer
Use quantizer value read from bitstream
Cosmetics: Remove two empty lines and realign some code
Reset acfilter_prevvalues buffer in clear_codec_buffers()
Fix AC filter buffers and AC filter reversion
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous code ended in multiple different infinite
loops. See stl_ten_1_big.sfd as example with and without zzuf
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
The original code wasn't taking into account the fact that linesize may not equal the frame's width. This is to correct that.
Signed-off-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegenc: use avctx->slices as number of slices
v410enc: fix undefined signed left shift caused by integer promotion
Release notes: mention cleaned up header includes
fix Changelog file
Fix a bunch of typos.
Drop some pointless void* return value casts from av_malloc() invocations.
wavpack: fix typos in previous cosmetic clean-up commit
wavpack: cosmetics: K&R pretty-printing
avconv: remove the 'codec framerate is different from stream' warning
wavpack: determine sample_fmt before requesting a buffer
bmv audio: implement new audio decoding API
mpegaudiodec: skip all channels when skipping granules
mpegenc: simplify muxrate calculation
Conflicts:
Changelog
avconv.c
doc/RELEASE_NOTES
libavcodec/h264.c
libavcodec/mpeg12.c
libavcodec/mpegaudiodec.c
libavcodec/mpegvideo.c
libavformat/mpegenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Up until now, the decoder didn't output anything
in the data buffer. This fixes all the issues
related to sample format, removes leftover code
and actually outputs some audio to data buffer.
With this, the only sample we have can be played.
Seeking is still broken though.
Adds a new member to MpegEncContext to hold the number of used slice
contexts. Fixes segfaults with '-threads 17 -thread_type slice' and
fate-vsynth{1,2}-mpeg{2,4}thread{,_ilace} with --disable-pthreads.
* qatar/master:
avconv: make -frames work for all types of streams, not just video.
bfi: K&R cosmetics
bgmc: K&R cleanup
rawdec: Set start_time to 0 for raw audio files.
Detect 'yuv2' as rawvideo also in avi.
rawdec: propagate pict_type information to the output frame
rawdec: Support more QT 1bpp rawvideo files.
avconv: free bitstream filters
threads: limit the number of automatic threads to MAX_AUTO_THREADS
avplay: K&R cleanup
fate: use rgb24 as output format for dfa tests
threads: set thread_count to 1 when thread support is disabled
threads: introduce CODEC_CAP_AUTO_THREADS and add it to libx264
Conflicts:
ffplay.c
libavcodec/avcodec.h
libavcodec/pthread.c
libavcodec/version.h
tests/ref/fate/dfa1
tests/ref/fate/dfa10
tests/ref/fate/dfa11
tests/ref/fate/dfa2
tests/ref/fate/dfa3
tests/ref/fate/dfa4
tests/ref/fate/dfa5
tests/ref/fate/dfa6
tests/ref/fate/dfa7
tests/ref/fate/dfa8
tests/ref/fate/dfa9
Merged-by: Michael Niedermayer <michaelni@gmx.at>
fixes ticket #813
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Reviewed-by: Jean First <jeanfirst@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The extra thread added in {frame_}*thread_init was not taken into
account. Explicitly sets thread_count to 1 if only one CPU core was
detected. Also fixes two typos in comments.
Some external codecs have their own code to determine the best number
of threads. This number is not necessary the number of cpu cores.
Thread_count will be only 0 if the codec has CODEC_CAP_AUTO_THREADS.
* qatar/master:
FATE: add tests for dfa
mpegaudiodec: fix seeking.
mpegaudiodec: fix compilation when testing the unchecked bitstream reader
threads: add sysconf based number of CPUs detection
threads: always include necessary headers for number of CPUs detection
threads: default to automatic thread count detection
Changelog: restore version <next> header
cook: K&R formatting cosmetics
Conflicts:
Changelog
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The safe bitstream reader does not allow using skip_bits_long() to seek to a
point before the start of the buffer, which was needed by the mp3 decoder.
This change instead calculates the start point of the first valid granule and
skips to that position.
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Since the conditions for the actual usage are more specific a less
preferred method can be used. This would cause compilation errors
because necessary headers are not included.
This has been fixed differently and its revert avoids error messages
when decoding xx.flv. This also reduces the difference to qatar.
This reverts commit 5a2b3f3a52.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: whitespace cosmetics
fate: split off video codec FATE tests into their own file
fate: split off audio codec FATE tests into their own file
fate: split off Electronic Arts codec FATE tests into their own file
fate: split off QuickTime codec FATE tests into their own file
fate: split off voice codec FATE tests into their own file
fate: split off demuxer FATE tests into their own file
cosmetics: Drop unnecessary parentheses around return values.
fate: drop pointless _audio and _video suffixes from xan tests
qt-faststart: K&R reformatting; fix comment typos
FATE: Add test for H.264 MP4->annex.B bitstream filter.
Conflicts:
ffplay.c
tests/fate.mak
tests/fate/h264.mak
tests/fate/image.mak
tests/fate/lossless-audio.mak
tests/fate/lossless-video.mak
tests/fate/qtrle.mak
tests/fate/real.mak
tests/fate/screen.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: split off DPCM codec FATE tests into their own file
fate: split off PCM codec FATE tests into their own file
libvorbis: K&R reformatting cosmetics
libmp3lame: K&R formatting cosmetics
fate: Add a video test for xxan decoder
mpegvideo_enc: K&R cosmetics (line 1000-2000).
avconv: K&R cosmetics
qt-faststart: Fix up indentation
indeo4: remove two unused variables
doxygen: cleanup style to support older doxy
fate: add more tests for VC-1 decoder
applehttpproto: Apply the same reload interval changes as for the demuxer
applehttp: Use half the target duration as interval if the playlist didn't update
applehttp: Use the last segment duration as reload interval
lagarith: add decode support for arith rgb24 mode
Conflicts:
avconv.c
libavcodec/libmp3lame.c
libavcodec/mpegvideo_enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegvideo_enc: K&R cosmetics
doxygen: remove unreplaced variables from custom header and footer
threads: test for sys/param.h and include it for sysctl on OpenBSD
v4l2: remove unneded linux specific asm/types.h include
x86: Fix constraints for decode_significance*_x86
Conflicts:
libavcodec/mpegvideo_enc.c
libavdevice/v4l2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The existing code expected a palette buffer holding 256 uint32_t's allocated in the data[1] field of the AVFrame structure, but data[1] was NULL. The bug is fixed by using a fixed local array (palette256) to hold the palette instead.
This solves http://ffmpeg.org/trac/ffmpeg/ticket/833
Signed-off-by: Frank Vernaillen <fr_ve@hotmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Originally, prior to 8742a4ff8, the caller code was compiled
within this condition:
ARCH_X86 && HAVE_7REGS && HAVE_EBX_AVAILABLE && !defined(BROKEN_RELOCATIONS)
Since HAVE_7REGS is defined as
(ARCH_X86_64 || (HAVE_EBX_AVAILABLE && HAVE_EBP_AVAILABLE))
the subcondition HAVE_7REGS && HAVE_EBX_AVAILABLE is equal
to HAVE_7REGS (for 32 bit at least). The correct simplification
of the original condition thus is HAVE_7REGS, not
HAVE_EBX_AVAILABLE.
This fixes compilation in some cases where HAVE_EBP_AVAILABLE = 0
and HAVE_EBX_AVAILABLE = 1.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
avs: call release_buffer() at the end.
Add minor bumps and APIchanges entries for lavc/lavfi changes.
mpegvideo.c: K&R formatting and cosmetics.
avconv: avoid memcpy in vsrc_buffer when possible.
avconv: implement get_buffer()/release_buffer().
lavfi: add a new function av_buffersrc_buffer().
lavfi: add avfilter_copy_frame_props()
lavc: add format field to AVFrame
lavc: add width and height fields to AVFrame
lavc: add a sample_aspect_ratio field to AVFrame
doxy: add website-alike style to the html output
FAQ: add an entry for common error when using -profile
Conflicts:
avconv.c
cmdutils.c
doc/APIchanges
libavcodec/avcodec.h
libavcodec/mpegvideo.c
libavcodec/utils.c
libavcodec/version.h
libavfilter/Makefile
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/src_movie.c
libavfilter/vsrc_buffer.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The format is a per-frame property, having it in AVFrame simplify the
operation of extraction of that information, since avoids the need to
access the codec/stream context.
width and height are per-frame properties, setting these values in
AVFrame simplify the operation of extraction of that information,
since avoids the need to check the codec/stream context.
The sample aspect ratio is a per-frame property, so it makes sense to
define it in AVFrame rather than in the codec/stream context.
Simplify application-level sample aspect ratio information extraction,
and allow further simplifications.
* shariman/wmall:
Perform dequantization of channel coefficients
Perform inverse inter-channel decorrelation and ac-filter
Implement revert_inter_ch_decorr() and revert_acfilter()
Enable inverse-MCLMS filter
Fix inverse-MCLMS filtering routines
Do not update buffers in case no speed change is necessary
Use int for channel_coeffs instead of int16_t
Conflicts:
libavcodec/wmalosslessdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vp3dec: Check coefficient index in vp3_dequant()
svq1dec: call avcodec_set_dimensions() after dimensions changed.
Prepare for 0.8_beta1 snapshot release
threads: check defines before using them in automatic thread detection
pthread: include sys/types.h before sys/sysctl.h
4xm: remove unused variables.
h264: Fix a possible overread in decode_nal_units()
allfilters: fix type of avfilter_vsrc_buffer.
w32thread: call ResetEvent() in pthread_cond_broadcast().
Conflicts:
Changelog
RELEASE
doc/RELEASE_NOTES
libavcodec/pthread.c
libavcodec/vp3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Based on a patch by Michael Niedermayer <michaelni@gmx.at>
Fixes NGS00145, CVE-2011-4352
Found-by: Phillip Langlois
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
* qatar/master:
build: fix standalone compilation of OMA muxer
build: fix standalone compilation of Microsoft XMV demuxer
build: fix standalone compilation of Core Audio Format demuxer
kvmc: fix invalid reads
4xm: Add a check in decode_i_frame to prevent buffer overreads
adpcm: fix IMA SMJPEG decoding
options: set minimum for "threads" to zero
bsd: use number of logical CPUs as automatic thread count
windows: use number of CPUs as automatic thread count
linux: use number of CPUs as automatic thread count
pthreads: reset active_thread_type when slice thread_init returrns early
v410dec: include correct headers
Drop ALT_ prefix from BITSTREAM_READER_LE name.
lavfi: always build vsrc_buffer.
ra144enc: zero the reflection coeffs if the filter is unstable
sws: readd PAL8 to isPacked()
mov: Don't stick the QuickTime field ordering atom in extradata.
truespeech: fix invalid reads in truespeech_apply_twopoint_filter()
Conflicts:
configure
libavcodec/4xm.c
libavcodec/avcodec.h
libavfilter/Makefile
libavfilter/allfilters.c
libavformat/Makefile
libswscale/swscale_internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use sched_getaffinity to determine the number of logical CPUs.
Limits the number of threads to 16 since slice threading of H.264
seems to be buggy with more than 16 threads.
This file does not use anything from get_bits.h but needs
intreadwrite.h.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
The 'fiel' atoms can be found in H.264 tracks clobbering the extradata.
MJPEG supports non field based extradata, and this data should be
preserved when copying.
This way ffmpeg can be distinguished from the fork by a user
application or a encoded file by a decoder.
The highest value micro had, in the past, that i could find, was 6
thus 100 should be safe.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (27 commits)
asfdec: add side data to ASFStream packet instead of output packet.
idroqdec: set AVFMTCTX_NOHEADER and create streams as they occur.
nellymoserdec: Indicate that the decoder can handle changed parameters
libavcodec: Apply parameter change side data when decoding audio
flvdec: Add param change side data if the sample rate or channels have changed
libavformat: Add a utility function for adding parameter change side data
libavcodec: Define a side data type for parameter changes
aacdec: Handle new extradata passed as side data
flvdec: Export new AAC/H.264 extradata as side data on the next packet
libavcodec: Define a side data type for new extradata
flacdec: skip all track indices at once instead of looping.
mxf: Add PictureEssenceCoding UL for V210.
mxfdec: consider QuantizationBits between 17 and 24 to be pcm_s24*
mxfenc: Add support for MPEG-2 MP@HL-14 in mxf container.
mxf: H.264/MPEG-4 AVC Intra support
configure: Show whether the safe bitstream reader is enabled
x86: Tighten register constraints for decode_significance*_x86.
Replace Subversion revisions in comments by Git hashes.
h264_cabac: synchronize decode_significance_*_x86 conditionals
w32threads: wait for the waked thread in pthread_cond_signal.
...
Conflicts:
libavcodec/avcodec.h
libavcodec/version.h
libavformat/flvdec.c
libavformat/utils.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also define a codec capability for codecs that can handle
parameters changed externally between decoded packets.
Signed-off-by: Martin Storsjö <martin@martin.st>
On 32-bit OS X with gcc 4.0/4.2 and shared libraries enabled, the ebx register
is not available, but required to assemble the functions.
This reverts commit 8742a4f to a simplified version of the original constraints.
This fixes a deadlock VLC triggered with multithreaded decoding. The
wait forces one of the current waiters to wake and not the thread
which calls pthread_cond_signal() itself.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
lavc: always align height by 32 pixel
raw: add 10bit YUV definitions
nut: support 10bit YUV
mpegvideo_enc: separate declarations and statements
oma: make header compile standalone
vp3: Reorder some functions to fix VP3 build with Theora disabled.
build: fix standalone compilation of ADX encoder
build: fix standalone compilation of ADPCM decoders
build: fix standalone compilation of mpc7/mpc8 decoders
4xm: Use bytestream2 functions to prevent overreads
bytestream: add a new set of bytestream functions with overread checking
mpegts: Suppress invalid timebase warnings on DMB streams.
mpegts: Fix typo in handling sections in the PMT.
vc1dec: Use the right pointer type for the tmp pointer
Conflicts:
libavcodec/4xm.c
libavcodec/utils.c
libavcodec/vc1dec.c
libavcodec/vp3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Interlaced content for most codec requires it.
This patch is a stop-gap pending a serious rework to support
codecs with non 16 pixel macroblocks.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
h264: clear trailing bits in partially parsed NAL units
vc1: Handle WVC1 interlaced stream
xl: Fix overreads
mpegts: rename payload_index to payload_size
segment: introduce segmented chain muxer
lavu: add AVERROR_BUG error value
avplay: clear pkt_temp when pkt is freed.
qcelpdec: K&R formatting cosmetics
qcelpdec: cosmetics: drop some pointless parentheses
x86: conditionally compile dnxhd encoder optimizations
Revert "h264: skip start code search if the size of the nal unit is known"
swscale: fix formatting and indentation of unscaled conversion routines.
h264: skip start code search if the size of the nal unit is known
cljr: fix buf_size sanity check
cljr: Check if width and height are positive integers
Conflicts:
libavcodec/cljr.c
libavcodec/vc1dec.c
libavformat/Makefile
libavformat/mpegtsenc.c
libavformat/segment.c
libswscale/swscale_unscaled.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Trailing bits are likely to be non-zero if the NAL unit is truncated.
Clearing the bits make overreads of the bitstream less likely in this
case. Fixes playback of
http://streams.videolan.org/streams/mp4/Mr_MrsSmith-h264_aac.mp4 which
has a forbidden byte sequence of 0x00 0x00 0x00 in it SPS.
* qatar/master:
APIchanges: fill in revision for AVFrame.age deprecation
avcodec: deprecate AVFrame.age
4xm: remove unneeded check for remaining unused data.
lavf: force threads to 1 in avformat_find_stream_info()
swscale: fix overflows in vertical scaling at top/bottom edges.
lavf: add OpenMG audio muxer.
omadec: split data that will be used in the muxer to a separate file.
lavf: rename oma.c -> omadec.c
tmv decoder: set correct pix_fmt
Conflicts:
Changelog
doc/APIchanges
libavcodec/mpegvideo.c
libavcodec/version.h
libavformat/oma.c
libavformat/version.h
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Start code emulation prevention is only required in Annex B bytestream
packed NAL units. For other coding formats the size is already known.
Looking for a start code prefix can result in false positives like in
http://streams.videolan.org/streams/mp4/Mr_MrsSmith-h264_aac.mp4
which has a false positive in the SPS.
Width and height might get passed as 0 and would cause floating point
exceptions in decode_frame.
Fixes bugzilla #149
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This was intended as an optimisation for skipped blocks in MPEG2
P-frames and never used elsewhere. Removing this "optimisation"
speeds up MPEG2 decoding by 1-2% (ARM Cortex-A9).
Signed-off-by: Mans Rullgard <mans@mansr.com>
The previous code ended in multiple different infinite
loops. See stl_ten_1_big.sfd as example with and without zzuf
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Previously the decoder only worked if the user had set avctx->pix_fmt
manually. For some reason the libavformat tmv demuxer sets this, so
the problem was not visible in avplay etc.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
that way qatar maintains the code for me and i dont need to resolve conflicts.
If someone wants the a32 reader back, only thing you need to do is maintain
it, i would be happy to have it back, iam just not volunteering to maintain
it due to lack of time.
Based on: a1e98f198e by Mans Rullgard.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
