The information is relevant, but under normal circumstances
it raises far too many false alarms.
Signed-off-by: Nicolas George <nicolas.george@normalesup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
drawtext: remove typo
pcm-mpeg: implement new audio decoding api
w32thread: port fixes to pthread_cond_broadcast() from x264.
doc: add editor configuration section with Vim and Emacs settings
dxva2.h: include d3d9.h to define LPDIRECT3DSURFACE9
avformat/utils: Drop unused goto label.
doxygen: Replace '\' by '@' in Doxygen markup tags.
cosmetics: drop some completely pointless parentheses
cljr: simplify CLJRContext
drawtext: introduce rand(min, max)
drawtext: introduce explicit draw/hide variable
rtmp: Use nb_invokes for all invoke commands
Conflicts:
libavcodec/mpegvideo.c
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers aren't needlessly
parsed. This speeds up parsing large files a lot.
704af3e29c broke publishing
of rtmp streams, at least publishing to Wowza servers.
This changes all invoke commands to use nb_invokes.
Signed-off-by: Martin Storsjö <martin@martin.st>
Its checked a few lines below too.
The only difference is that empty atoms with size=0 will now get parsed too.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The computed size doesn't contain the header size because it's already
skipped by incrementing total_size, but then it's skipped again in the
last line. The atom comes out 8 bytes short and the function
mov_read_chan() aborts the whole parsing process. I think the computed
size should be atom.size - total_size + 8.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mov: Don't av_malloc(0).
avconv: only allocate 1 AVFrame per input stream
avconv: fix memleaks due to not freeing the AVFrame for audio
h264-fate: remove -strict 1 except where necessary (mr4/5-tandberg).
misc Doxygen markup improvements
doxygen: eliminate Qt-style doxygen syntax
g722: Add a regression test for muxing/demuxing in wav
g722: Change bits per sample to 4
g722dec: Signal skipping the lower bits via AVOptions instead of bits_per_coded_sample
api-example: update to use avcodec_decode_audio4()
avplay: use avcodec_decode_audio4()
avplay: use a separate buffer for playing silence
avformat: use avcodec_decode_audio4() in avformat_find_stream_info()
avconv: use avcodec_decode_audio4() instead of avcodec_decode_audio3()
mov: Allow empty stts atom.
doc: document preferred Doxygen syntax and make patcheck detect it
Conflicts:
avconv.c
ffplay.c
libavcodec/mlpdec.c
libavcodec/version.h
libavformat/mov.c
tests/codec-regression.sh
tests/fate/h264.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
malloc() is allowed to return NULL when zero is the argument. This
causes us to think malloc has failed and return AVERROR(ENOMEM). In
addition OS X malloc() returns an unfreeable non-NULL pointer for size
zero when alignment is greater than 16.
instead of when the 2nd stream has been found.
This isnt ideal as we will likely still like before miss a data stream.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
aac_latm: reconfigure decoder on audio specific config changes
latmdec: fix audio specific config parsing
Add avcodec_decode_audio4().
avcodec: change number of plane pointers from 4 to 8 at next major bump.
Update developers documentation with coding conventions.
svq1dec: avoid undefined get_bits(0) call
ARM: h264dsp_neon cosmetics
ARM: make some NEON macros reusable
Do not memcpy raw video frames when using null muxer
fate: update asf seektest
vp8: flush buffers on size changes.
doc: improve general documentation for MacOSX
asf: use packet dts as approximation of pts
asf: do not call av_read_frame
rtsp: Initialize the media_type_mask in the rtp guessing demuxer
Cleaned up alacenc.c
Conflicts:
doc/APIchanges
doc/developer.texi
libavcodec/8svx.c
libavcodec/aacdec.c
libavcodec/ac3dec.c
libavcodec/avcodec.h
libavcodec/nellymoserdec.c
libavcodec/tta.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/wmadec.c
libavformat/asfdec.c
tests/ref/seek/lavf_asf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Pass the correct size in bits to mpeg4audio_get_config and add a flag
to disable parsing of the sync extension when the size is not known.
Latm with AudioMuxVersion 0 does not specify the size of the audio
specific config. Data after the audio specific config can be
misinterpreted as sync extension resulting in random and wrong configs.
Commit 035af99 made avconv always call an encoder when using the
null muxer. While useful for 2-pass encodes, it inadvertently
caused an extra memcpy of raw frames when decoding only.
This hack restores the old behaviour when only decoding while
allowing use of the null muxer with encoded streams as well.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The media_type_mask is initialized via AVOptions for the
rtsp and sdp demuxers, but it isn't available as an option
for the rtp guessing demuxer (since it doesn't really make
sense there). Therefore, it must be manually initialized
instead, since a zero value means no media types at all
are accepted.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (25 commits)
rtpenc: Add support for G726 audio
rtpdec: Interpret the different G726 names as bits_per_coded_sample
rtpenc: Change rtp_send_samples to handle sample sizes other than even bytes
rtpenc: Cast a rescaling parameter to int64_t
h264: cap max has_b_frames at MAX_DELAYED_PIC_COUNT - 1.
ARM: fix indentation in ff_dsputil_init_neon()
ARM: NEON put/avg_pixels8/16 cosmetics
ARM: add remaining NEON avg_pixels8/16 functions
ARM: clean up NEON put/avg_pixels macros
fate: split acodec-pcm into individual tests
swscale: #include "libavutil/mathematics.h"
pmpdec: don't use deprecated av_set_pts_info.
rv34: align temporary block of "dct" coefs
Add PlayStation Portable PMP format demuxer
proto: Realign struct initializers
proto: Use .priv_data_size to allocate the private context
mmsh: Properly clean up if the second ffurl_alloc failed
rtmp: Clean up properly if the handshake failed
md5proto: Remove the get_file_handle function
applehttpproto: Use the close function if the open function fails
...
Conflicts:
libavcodec/vble.c
libavformat/mmsh.c
libavformat/pmpdec.c
libavformat/udp.c
tests/ref/acodec/pcm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When skipping over the extended header, take into account
that the size field has already been read. The extended header
also takes up space, so adjust total header length accordingly.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
For the standardized 8 kHz sample rate, this works exactly the same.
For nonstandard sample rates, the different predefined G726
names (G726-16, G726-24, G726-32, G726-40) are interpreted as an
indication of the bits per coded sample, even though their
actual bitrates aren't what the name specifies.
This feels more sane than using free-form names for nonstandard
sample rate/bitrate combinations, e.g like G726-22, G726-33
for 11025 Hz.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids overflow if frame_size is over 2147, since both
frame_size and AV_TIME_BASE are plain integers.
Signed-off-by: Martin Storsjö <martin@martin.st>
Not yet complete, for demuxing AAC the AAC header must be generated
manually.
Possibly the decoder could accept the header as extradata to simplify
this.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This simplifies the open functions by avoiding one function
call that needs error checking, reducing the amount of
extra bulk code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This string will be passed to ff_http_auth_create_response
even if no proxy is used, resulting in reading uninitialized
memory. The other auth string is always initialized by
av_url_split.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec: Templatize the code for different g726 bitrate variants
rv40: move loop filter to rv34dsp context
lavf: make av_set_pts_info private.
rtpdec: Add support for G726 audio
rtpdec: Add an init function that can do custom codec context initialization
avconv: make copy_tb on by default.
matroskadec: don't set codec timebase.
rmdec: don't set codec timebase.
avconv: compute next_pts from input packet duration when possible.
lavf: estimate frame duration from r_frame_rate.
avconv: update InputStream.pts in the streamcopy case.
Conflicts:
avconv.c
libavdevice/alsa-audio-dec.c
libavdevice/bktr.c
libavdevice/fbdev.c
libavdevice/libdc1394.c
libavdevice/oss_audio.c
libavdevice/v4l.c
libavdevice/v4l2.c
libavdevice/vfwcap.c
libavdevice/x11grab.c
libavformat/au.c
libavformat/eacdata.c
libavformat/flvdec.c
libavformat/mpegts.c
libavformat/mxfenc.c
libavformat/rtpdec_g726.c
libavformat/wtv.c
libavformat/xmv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This requires using a separate init function, since there
isn't necessarily any fmtp lines for this codec, so
parse_sdp_a_line won't be called. Incorporating it with the
alloc function wouldn't do either, since it is called before
the full rtpmap line is parsed (where the sample rate is
extracted).
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
adtsenc: Check frame size.
txd: Fix order of operations.
APIchanges: fill in some blanks
timer: fix misspelling of "decicycles"
Eliminate pointless 0/NULL initializers in AVCodec and similar declarations.
indeo3: cosmetics
md5proto: Fix order of operations.
dca: Replace oversized unused get_bits() with skip_bits_long().
Conflicts:
doc/APIchanges
libavformat/mmsh.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vc1: use an enum for Frame Coding Mode
doc: cleanup filter section
indeo3: error out if no motion vector is set.
x86inc: Flag shufps as an floating-point instruction for the AVX emulation code.
mpegaudio: do not use init_static_data() for initializing tables.
musepack: fix signed shift overflow in mpc_read_packet()
mov: Make format string match variable type.
wmavoice: Make format string match variable type.
vc1: select interlaced scan table by FCM element
Generalize RIFF INFO tag support; support reading INFO tag in wav
pthread: track thread existence in a separate variable.
Conflicts:
doc/filters.texi
libavcodec/pthread.c
libavformat/avi.c
libavformat/riff.c
libavformat/riff.h
libavformat/wav.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Using an unsigned variable avoids problems with overflows.
There is further no need for a 64-bit intermediate here.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (42 commits)
swscale: fix signed overflow in yuv2mono_X_c_template
snow: fix integer overflows
svq1enc: remove stale altivec-related hack
snow: fix signed overflow in byte to 32-bit replication
adx: rename ff_adx_decode_header() to avpriv_adx_decode_header()
avformat: add CRI ADX format demuxer
adx: add an ADX parser.
adx: move header decoding to ADX common code
adx: calculate the number of blocks in a packet
adx: define and use 2 new macro constants BLOCK_SIZE and BLOCK_SAMPLES
adx: check for unsupported ADX formats
adx: simplify encoding by using put_sbits()
adx: calculate correct LPC coeffs
adx: use 12-bit coefficients instead of 14-bit to avoid integer overflow
adx: simplify adx_decode() by using get_sbits() to read residual samples
adx: fix the data offset parsing in adx_decode_header()
adx: remove unneeded post-decode channel interleaving
adx: validate header values
adx: cosmetics: general pretty-printing and comment clean-up
adx: remove useless comments
...
Conflicts:
Changelog
libavcodec/cook.c
libavcodec/fraps.c
libavcodec/nuv.c
libavcodec/pthread.c
libavcodec/version.h
libavformat/Makefile
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This simplifies the decoder so it doesn't have to process an in-packet header
or handle arbitrary-sized packets. It also fixes decoding of files with large
headers.
Also reduce verbosity for the unsupported stream message, use
an AVFormatContext for av_log and and print the tag of the
unknown stream.
Improves ticket #672.
* qatar/master:
libavutil: add utility functions to simplify allocation of audio buffers.
libavutil: add planar sample formats and av_sample_fmt_is_planar()
avconv: fix segfault at EOF with delayed pictures
pcmdec: remove unneeded resetting of samples pointer
avconv: remove a now unused parameter from output_packet().
avconv: formatting fixes in output_packet()
avconv: declare some variables in blocks where they are used
avconv: use the same behavior when decoding audio/video/subs
bethsoftvideo: return proper consumed size for palette packets.
cdg: skip packets that don't contain a cdg command.
crcenc: add flags
avconv: use vsync 0 for AVFMT_NOTIMESTAMPS formats.
tiffenc: add a private option for selecting compression algorithm
md5enc: add flags
ARM: remove needless .text/.align directives
Conflicts:
doc/APIchanges
libavcodec/tiffenc.c
libavutil/avutil.h
libavutil/samplefmt.c
libavutil/samplefmt.h
tests/ref/fate/bethsoft-vid
tests/ref/fate/cdgraphics
tests/ref/fate/film-cvid-pcm-stereo-8bit
tests/ref/fate/mpeg2-field-enc
tests/ref/fate/nuv
tests/ref/fate/tiertex-seq
tests/ref/fate/tscc-32bit
tests/ref/fate/vmnc-32bit
Merged-by: Michael Niedermayer <michaelni@gmx.at>
AVFMT_NOTIMESTAMPS for crc, as it ignores the timestamps.
AVFMT_VARIABLE_FPS for framecrc, as it prints dts.
Many FATE changes, because avconv is no longer duplicating frames in
those tests.
Also added -vsync 0 for some tests to prevent avconv from dropping
frames until it can be fixed more properly.
AVFMT_NOTIMESTAMPS for md5, as it ignores the timestamps.
AVFMT_VARIABLE_FPS for framemd5, as it prints dts.
-vsync 0 for the vp8 test is needed because with vsync 2 the timestamp
guessing code gets confused by an altref frame that is never displayed
and drops a frame later.
* qatar/master: (22 commits)
aacdec: Fix PS in ADTS.
avconv: Consistently use PIX_FMT_NONE.
dsputil: use cpuflags in x86 emu_edge_core
dsputil: use movups instead of movdqu in ff_emu_edge_core_sse()
wma: initialize prev_block_len_bits, next_block_len_bits, and block_len_bits.
mov: Remove some redundant and obsolete comments.
Add libavutil/mathematics.h #includes for INFINITY
doxy: structure libavformat groups
doxy: introduce an empty structure in libavcodec
doxy: provide a start page and document libavutil
doxy: cleanup pixfmt.h
regtest: split video encode/decode tests into individual targets
ARM: add explicit .arch and .fpu directives to asm.S
pthread: do not touch has_b_frames
avconv: cleanup the transcoding loop in output_packet().
avconv: split subtitle transcoding out of output_packet().
avconv: split video transcoding out of output_packet().
avconv: split audio transcoding out of output_packet().
avconv: reindent.
avconv: move streamcopy-only code out of decoding loop.
...
Conflicts:
avconv.c
libavcodec/aaccoder.c
libavcodec/pthread.c
libavcodec/version.h
libavutil/audioconvert.h
libavutil/avutil.h
libavutil/mem.h
tests/ref/vsynth1/dv
tests/ref/vsynth1/mpeg2thread
tests/ref/vsynth2/dv
tests/ref/vsynth2/mpeg2thread
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Adding the thread count in frame level multithreading to has_b_frames
as an additional delay causes more problems than it solves.
For example inconsistent behaviour during timestamp calculation in
libavformat.
Thread count and frame level multithreading are both set by the user.
If the additional delay caused by frame level multithreading needs
to be considered in the calling code it has all information to take
it into account.
Should it become necessary to calculate a maximum delay inside
libavcodec it should be exported as its own field and not reusing
an existing field.
Based on a patch by Michael Niedermayer.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Some sample IFF ACBM files can be found here:
http://aminet.net/package/dev/basic/ABdemos
Thanks to Peter Ross for his help with this patch.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* shariman/wmall: (24 commits)
Clean-up
dump_int_buffer() to dump samples from a buffer
Implement revert_cdlms()
Doxy for reset_codec()
Store transient state and position of transient area
Implement use_high_update_speed() and use_normal_update_speed()
Initialize num_logged_tiles and remove unnecessary codes
Log index for each line of output
Log tile size
Output decoded residues
Replace placeholders with actual calls to clear_codec_buffers() and reset_codec()
Implement lms_update()
Implement lms_predict()
Implement reset_codec()
Add missing syntax elements to WmallDecodeCtx
Add .recent syntax element to cdlms struct
Implement clear_codec_buffers()
Add buffers to context necessary for reverting cdmls and mclms filter
Use avpriv_copy_bits() instead of ff_copy_bits()
Cosmetics
...
Conflicts:
libavcodec/wmalosslessdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
configure: add check for w32threads to enable it automatically
rtmp: do not hardcode invoke numbers
cinepack: return non-generic errors
fate-lavf-ts: use -mpegts_transport_stream_id option.
Add an APIchanges entry and a minor bump for avio changes.
avio: Mark the old interrupt callback mechanism as deprecated
avplay: Set the new interrupt callback
avconv: Set new interrupt callbacks for all AVFormatContexts, use avio_open2() everywhere
cinepak: remove redundant coordinate checks
cinepak: check strip_size
cinepak, simplify, use AV_RB24()
cinepak: simplify, use FFMIN()
cinepak: Fix division by zero, ask for sample if encoded_buf_size is 0
applehttp: Fix seeking in streams not starting at DTS=0
http: Don't use the normal http proxy mechanism for https
tls: Handle connection via a http proxy
http: Reorder two code blocks
http: Add a new protocol for opening connections via http proxies
http: Split out the non-chunked buffer reading part from http_read
segafilm: add support for raw videos
...
Conflicts:
avconv.c
configure
doc/APIchanges
libavcodec/cinepak.c
libavformat/applehttp.c
libavformat/version.h
tests/lavf-regression.sh
tests/ref/lavf/ts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Note: FCPublish/FCUnpublish are adobe server specific and not described
in the rtmp specification. Some servers might not cope with them at
all.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The Apple HTTP Live Streaming demuxer's implementation of
seeking searches for the MPEG TS segment which contains the
requested timestamp. In its current implementation it assumes
that the first segment will start from 0.
But, MPEG TS streams do not necessarily start with timestamp
(near) 0, causing seeking to fail for those streams.
This also occurs when using live streaming of HTTP Live Streams.
In this case sliding playlists may be used, which means that in
that case only the last x encoded segments are stored, the earlier
segments get deleted from disk and removed from the playlist.
Because of this, when starting playback of a stream in the middle
of such a broadcast, the initial segment fetched after parsing
the m3u8 playlist will not start from timestamp (near) 0, causing
(the admittedly limited live) seeking to fail.
This patch changes this demuxers seeking implementation to use
the initial DTS as an offset for searching the segments containing
the requested timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
The tls protocol handles connections via proxies internally.
With TLS/SSL, the peer verification requires that the client
speaks directly with the server, since the proxy doesn't have
the remote server's private key.
Signed-off-by: Martin Storsjö <martin@martin.st>
This opens a plain TCP connection through the proxy via the
CONNECT HTTP method. Normally, this is allowed for connections
on port 443, but can in general be used to allow connections
to any port (depending on proxy configuration), and could thus
be used to tunnel any TCP connection via a HTTP proxy.
Signed-off-by: Martin Storsjö <martin@martin.st>
RTCP timestamps are only necessary to synchronize time between
multiple streams. For a single stream, the RTP packet timestamp
provides more reliable timing. As a result, single-stream RTP
sessions should now have accurate and monotonic PTS.
Signed-off-by: Martin Storsjö <martin@martin.st>
Our ac3 code chain can handle it fine.
More ideal would be to write a demuxer that actually extracts what can be from the additional
headers and uses it for whatever it can be used for.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
TLSv1 is compatible with SSLv3, so this doesn't change much
in terms of compatibility. By explicitly using TLSv1, OpenSSL
sends the server name indication (SNI) header, which we
already set using SSL_set_tlsext_host_name (earlier, this
didn't have any effect).
SNI allows servers to serve SSL content for different host
names with separate certificates on one single port (vhosts).
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
mpegaudiodec: Don't use a nonexistent log context for av_dlog
avformat: Accept the ISO8601 separate format as input, too
avformat: Interpret times in ff_iso8601_to_unix_time as UTC
avutil: Add av_timegm as a public function
cinepak: Add another special case so that it can handle the following file:
lagarith: add some RGBA decoding support
lagarith: Add correct line prediction for RGB
Conflicts:
doc/APIchanges
libavcodec/cinepak.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the function accept the format of creation_time
as output by demuxers (e.g. the mov demuxer), making the
creation timestamp stay intact if transcoding.
Signed-off-by: Martin Storsjö <martin@martin.st>
This function is used in muxers for parsing the 'creation_time'
metadata key, for converting it to a time value.
This makes it match the behaviour of the exported 'creation_time'
metadata from demuxers, where it is in UTC, too.
Signed-off-by: Martin Storsjö <martin@martin.st>
Converting to double before the multiplication rather than after
avoids an integer overflow in some cases.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The Apple HTTP Live Streaming demuxer's implementation of seeking searches for
the MPEG TS segment which contains the requested timestamp. In its current
implementation it assumes that the first segment will start from 0.
But, MPEG TS streams do not necessarily start with timestamp (near) 0, causing
seeking to fail for those streams.
This also occurs when using live streaming of HTTP Live Streams. In this case
sliding playlists may be used, which means that in that case only the last x
encoded segments are stored, the earlier segments get deleted from disk and
removed from the playlist. Because of this, when starting playback of a stream
in the middle of such a broadcast, the initial segment fetched after parsing
the m3u8 playlist will not start from timestamp (near) 0, causing (the
admittedly limited live) seeking to fail.
This patch changes this demuxers seeking implementation to use the initial DTS
as an offset for searching the segments containing the requested timestamp.
* qatar/master:
binkvideo: simplify and remove invalid shifts
pulse: compute frame_duration once and fix it
lavf: simplify format_child_class_next()
hwaccel: OS X Video Decoder Acceleration (VDA) support.
doc: add support for an optional navigation bar in texi2html pages
Conflicts:
configure
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/vda.c
libavcodec/vda.h
libavcodec/vda_h264.c
libavcodec/vda_internal.h
libavcodec/version.h
libavformat/options.c
libavutil/avutil.h
libavutil/pixfmt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavf: pass options from AVFormatContext to avio.
avformat: Use avio_open2, pass the AVFormatContext interrupt_callback onwards
avio: add avio_open2, taking an interrupt callback and options
avio: add support for passing options to protocols.
avio: add and use ffurl_protocol_next().
avformat: Pass the interrupt callback on to chained muxers/demuxers
avio: Add an AVIOInterruptCB parameter to ffurl_open/ffurl_alloc
avformat: Use ff_check_interrupt
avio: Add an internal utility function for checking the new interrupt callback
avio: Add AVIOInterruptCB
texi2html: remove stray \n
doc: prettyfy the texi2html documentation
swscale: handle unaligned buffers in yuv2plane1
Conflicts:
libavformat/avformat.h
libavformat/avio.c
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The interrupt callback has to be passed in during opening (setting it
after opening isn't enough), since a blocking open couldn't be
interrupted otherwise.
Options are passed down to procotols and also need to be available
during open() in most cases.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is a better io interrupt callback function, which has an
opaque parameter, which is given to the interrupt callback.
This allows callers to precisely cancel IO for one single
AVFormatContext, without interrupt other ones in the same
process.
Note, it's not needed in AVIOContext, at the moment.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
vble: remove vble_error_close
VBLE Decoder
tta: use an integer instead of a pointer to iterate output samples
shorten: do not modify samples pointer when interleaving
mpc7: only support stereo input.
dpcm: do not try to decode empty packets
dpcm: remove unneeded buf_size==0 check.
twinvq: add SSE/AVX optimized sum/difference stereo interleaving
vqf/twinvq: pass vqf COMM chunk info in extradata
vqf: do not set bits_per_coded_sample for TwinVQ.
twinvq: check for allocation failure in init_mdct_win()
swscale: add padding to conversion buffer.
rtpdec: Simplify finalize_packet
http: Handle proxy authentication
http: Print an error message for Authorization Required, too
AVOptions: don't return an invalid option when option list is empty
AIFF: add 'twos' FourCC for the mux/demuxer (big endian PCM audio)
Conflicts:
libavcodec/avcodec.h
libavcodec/tta.c
libavcodec/vble.c
libavcodec/version.h
libavutil/opt.c
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add a decoder for the VBLE Lossless Codec, which
still has a cult following. Used to be popular
several years ago on doom9.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add a decoder for the VBLE Lossless Codec, which
still has a cult following. Used to be popular
several years ago on doom9.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This is needed because the twinvq decoder cannot rely on bit_rate to be set.
The API documentation says that bit_rate is set by libavcodec, not by the
user.
Tested with both Basic and Digest authentication, and tested with
both proxy authentication and authentication for the requested
resource at the same time.
Signed-off-by: Martin Storsjö <martin@martin.st>
The error was hidden before, to avoid showing an error on the
first request where no auth has been provided, when the server
indicates which authentication method to use.
Now the error is printed if an authentication method was used,
but failed.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (29 commits)
doc: update libavfilter documentation
tls: Use the URLContext as logging context
aes: Avoid illegal read and don't generate more key than we use.
mpc7: Fix memset call in mpc7_decode_frame function
atrac1: use correct context for av_log()
apedec: consume the whole packet when copying to the decoder buffer.
apedec: do not needlessly copy s->samples to nblocks.
apedec: check output buffer size after calculating actual output size
apedec: remove unneeded entropy decoder normalization.
truespeech: use memmove() in truespeech_update_filters()
vorbisdec: remove AVCODEC_MAX_AUDIO_FRAME_SIZE check
vorbisdec: remove unneeded buf_size==0 check
vorbisdec: return proper error codes instead of made-up ones
http: Don't add a Range: bytes=0- header for POST
sunrast: Check for invalid/corrupted bitstream
http: Change the chunksize AVOption into chunked_post
http: Add encoding/decoding flags to the AVOptions
avconv: remove some codec-specific hacks
crypto: add decoding flag to options.
tls: use AVIO_FLAG_NONBLOCK instead of deprecated URL_FLAG_NONBLOCK
...
Conflicts:
doc/libavfilter.texi
libavcodec/atrac1.c
libavcodec/sunrast.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The chunksize internal variable has two different uses - for
reading, it's the amount of data left of the current chunk
(or -1 if the server doesn't send data in chunked mode), where
it's only an internal state variable. For writing, it's used
to decide whether to enable chunked encoding (by default), by
using the value 0, or disable chunked encoding (value -1).
This, while consistent, doesn't make much sense to expose
as an AVOption. This splits the usage of the internal variable
into two variables, chunksize which is used for reading (as
before), and chunked_post which is the user-settable option,
with the values 0 and 1, where 1 is default.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
avcodec: add support for planar signed 8-bit PCM.
ra144enc: add sample_fmts list to ff_ra_144_encoder
smackaud: use uint8_t* for 8-bit output buffer type
smackaud: clip output samples
smackaud: use sign_extend() for difference value instead of casting
sipr: use a function pointer to select the decode_frame function
sipr: set mode based on block_align instead of bit_rate
sipr: do not needlessly set *data_size to 0 when returning an error
ra288: fix formatting of LOCAL_ALIGNED_16
udp: Allow specifying the local IP address
VC1: Add bottom field offset to block_index[] to avoid rewriting (+10L)
vc1dec: move an if() block.
vc1dec: use correct hybrid prediction threshold.
vc1dec: Partial rewrite of vc1_pred_mv()
vc1dec: take ME precision into account while scaling MV predictors.
lavf: don't leak corrupted packets
Conflicts:
libavcodec/8svx.c
libavcodec/ra288.c
libavcodec/version.h
libavformat/iff.c
libavformat/udp.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is found in some 8svx files (e.g. ones created by SoX).
Currently the decoder reuses the 8svx functions because we already have
handling of a single large planar packet for the compressed 8svx codecs.
not to mention race conditions and that its used for stream copy, used to determine IPB type by
applications and other things.
Fixes various frame drop/timestamp issues with frame multithreading.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
tls: Use ERR_get_error() in do_tls_poll
indeo3: Fix a fencepost error.
mxfdec: Fix comparison of unsigned expression < 0.
mpegts: set stream id on just created stream, not an unrelated variable
ra288: return error if input buffer is too small
ra288: utilize DSPContext.vector_fmul()
ra288: use memcpy() to copy decoded samples to output
mace: only calculate output buffer size once
Remove redundant filename self-references inside files.
indeo3data: add missing config.h #include for HAVE_BIGENDIAN
x86: drop pointless ARCH_X86 #ifdef from files in x86 subdirectory
avplay: reset rdft when closing stream.
doc/git-howto: expand format-patch and send-email notes.
lavf: expand doxy for some AVFormatContext fields.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The return value ret isn't an error code that can be passed
to ERR_error_string().
This makes the error messages printed actually contain useful
information.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
avformat: Avoid a warning about mixed declarations and code
BMV demuxer and decoder
matroskaenc: Make sure the seekhead struct is freed even on seek failure
mpeg12enc: Remove write-only variables.
mpeg12enc: Don't set up run-level info for level 0.
msmpeg4: Don't set up run-level info for level 0.
avformat: Warn about using network functions without calling avformat_network_init
avformat: Revise wording
rdt: Set AVFMT_NOFILE on ff_rdt_demuxer
rdt: Check the return value of avformat_open
rtsp: Discard the dynamic handler, if it has an alloc function which failed
dsputil: use cpuflags in x86 versions of vector_clip_int32()
Conflicts:
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
libavformat/allformats.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The caller expects the seekhead struct to be freed when calling
matroska_write_seekhead. Currently, the structure is leaked if the
seek fails.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is to make developers aware of the fact that they will
start using the new init function at some point.
Signed-off-by: Martin Storsjö <martin@martin.st>
It might make sense not to make the function completely mandatory
immediately at the next bump, which might be quite soon after
the function was introduced.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes rdt work again, which has been broken since
603b8bc2a1. This commit made
opening a demuxer without a file (or in this case, with a filename
which can't be opened) fail, unless the demuxer actually declared
AVFMT_NOFILE.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (23 commits)
x86inc: use sse versions of common macros instead of sse2 when applicable
doc/APIchanges: add missing dates and hashes
lavf: don't return from void av_update_cur_dts()
Changelog: add more entries.
Changelog: update ffmpeg/avconv incompatibility list.
avconv: remove some redundant temporary variables.
avconv: fix broken indentation
avconv: move copy_initial_nonkeyframes to the options context.
avconv: use file:stream instead of file.stream in log messages.
doc/avconv: elaborate on basic functionality.
doc/avconv: -sample_fmts, not -help sample_fmts prints the sample formats
openssl: Only use CRYPTO_set_id_callback on OpenSSL < 1.0.0
Call avformat_network_init/deinit in the programs
Remove leftover includes of strings.h
avutil: Don't allow using strcasecmp/strncasecmp
Replace all usage of strcasecmp/strncasecmp
avstring: Add locale independent implementations of strcasecmp/strncasecmp
avstring: Add locale independent implementations of toupper/tolower
cosmetics: insert some spaces in explicit enum value assignments
move 8SVX audio codecs to the audio codec list part on the next bump
...
Conflicts:
avprobe.c
doc/APIchanges
ffplay.c
ffserver.c
libavcodec/avcodec.h
libavdevice/bktr.c
libavdevice/v4l.c
libavdevice/v4l2.c
libavformat/matroskaenc.c
libavformat/wtv.c
libavutil/avstring.c
libavutil/avstring.h
libavutil/avutil.h
libswscale/x86/swscale_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
