* qatar/master:
dnxhddec: optimise dnxhd_decode_dct_block()
rtp: remove disabled code
eac3enc: use different numbers of blocks per frame to allow higher bitrates
dnxhd: add regression test for 10-bit
dnxhd: 10-bit support
dsputil: update per-arch init funcs for non-h264 high bit depth
dsputil: template get_pixels() for different bit depths
dsputil: create 16/32-bit dctcoef versions of some functions
jfdctint: add 10-bit version
mov: add clcp type track as Subtitle stream.
mpeg4: add Mpeg4 Profiles names.
mpeg4: decode Level Profile for MPEG4 Part 2.
ffprobe: display bitstream level.
imgconvert: remove unused glue and xglue macros
Conflicts:
libavcodec/dsputil_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
High bitdepth H.264 needs 32-bit transform coefficients, whereas
dnxhd does not. This creates a conflict with the templated
functions operating on DCTELEM data. This patch adds a field
allowing the caller to choose the element size in dsputil_init()
and adds the required functions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
Remove h264_lowres_idct_put/add functions
Remove snow/dwt test program
h264: remove some disabled code
Fix incorrect max_lowres values
matroskadec: fix integer underflow if header length < probe length.
cosmetics: indentation
eac3enc: use frame exponent strategy when applicable.
cosmetics: rename eac3dec_data.c/h to eac3_data.c/h since the tables will also be used in the E-AC-3 encoder.
dsputil: fix ff_check_alignment()
Conflicts:
libavcodec/Makefile
libavcodec/h264idct_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
FF_COMMON_FRAME holds the contents of the AVFrame structure and is also copied
to struct Picture. Replace by an embedded AVFrame structure in struct Picture.
* qatar/master: (22 commits)
H.264: fix filter_mb_fast with 4:4:4 + 8x8dct
alsa: limit buffer_size to 32768 frames.
alsa: fallback to buffer_size/4 for period_size.
doc: replace @pxref by @ref where appropriate
mpeg1video: don't abort if thread_count is too high.
segafilm: add support for videos with cri adx adpcm
gxf: Fix 25 fps DV material in GXF being misdetected as 50 fps
libxvid: Add const qualifier to silence compiler warning.
H.264: improve qp_thresh check
H.264: use fill_rectangle in CABAC decoding
H.264: Remove redundant hl_motion_16/8 code
H.264: merge fill_rectangle into P-SKIP MV prediction, to match B-SKIP
H.264: faster P-SKIP decoding
H.264: av_always_inline some more functions
H.264: Add x86 assembly for 10-bit H.264 predict functions
swscale: rename uv_off/uv_off2 to uv_off_px/byte.
swscale: implement error dithering in planarCopyWrapper.
swscale: error dithering for 16/9/10-bit to 8-bit.
swscale: fix overflow in 16-bit vertical scaling.
swscale: fix crash in 8-bpc bilinear output without alpha.
...
Conflicts:
doc/developer.texi
libavdevice/alsa-audio.h
libavformat/gxf.c
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/swscale_unscaled.c
libswscale/x86/swscale_template.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_crop
tests/ref/lavfi/pixfmts_hflip
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (40 commits)
H.264: template left MB handling
H.264: faster fill_decode_caches
H.264: faster write_back_*
H.264: faster fill_filter_caches
H.264: make filter_mb_fast support the case of unavailable top mb
Do not include log.h in avutil.h
Do not include pixfmt.h in avutil.h
Do not include rational.h in avutil.h
Do not include mathematics.h in avutil.h
Do not include intfloat_readwrite.h in avutil.h
Remove return statements following infinite loops without break
RTSP: Doxygen comment cleanup
doxygen: Escape '\' in Doxygen documentation.
md5: cosmetics
md5: use AV_WL32 to write result
md5: add fate test
md5: include correct headers
md5: fix test program
doxygen: Drop array size declarations from Doxygen parameter names.
doxygen: Fix parameter names to match the function prototypes.
...
Conflicts:
libavcodec/x86/dsputil_mmx.c
libavformat/flvenc.c
libavformat/oggenc.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
build: improve rules for test programs
build: factor out the .c and .S compile commands as a macro
swscale: remove unused xInc/srcW arguments from hScale().
H.264: disable 2tap qpel with CODEC_FLAG2_FAST and >8-bit
H.264: make filter_mb_fast support 4:4:4
mpeg4videoenc: Remove disabled variant of mpeg4_encode_block().
configure: allow post-fixed cpu strings for athlon64, k8, and opteron when setting the -march flag.
Move some variable declarations below the proper #ifdefs.
Conflicts:
Makefile
ffplay.c
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Drop git- prefix from version labels
Use the contents of RELEASE as version fallback instead of 'UNKNOWN'
path64/open64: filter out unsupported flags
Add Release Notes
sipr: Drop unused DSPContext
sipr: include string.h for mem*()
sipr: Use memmove() to copy overlapped buffers.
h264: drop some ugly casts
Conflicts:
version.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavc: add opt_find to AVCodecContext class.
h264: Complexify frame num gap shortening code
intreadwrite.h: fix AV_RL32/AV_RB32 signedness.
Fix decoding of mpegts streams with h264 video that does *NOT* have b frames
Add minor bumps and APIChanges entries for lavf private options.
ffmpeg: deprecate -vc and -tvstd
ffmpeg: use new avformat_open_* API.
ffserver: use new avformat_open_* API.
ffprobe: use new avformat_open_* API.
ffplay: use new avformat_open_* API.
cmdutils: add opt_default2().
dict: add AV_DICT_APPEND flag.
lavf: add avformat_write_header() as a replacement for av_write_header().
Deprecate av_open_input_* and remove their uses.
lavf: add avformat_open_input() as a replacement for av_open_input_*
AVOptions: add av_opt_find() as a replacement for av_find_opt.
AVOptions: add av_opt_set_dict() mapping a dictionary struct to a context.
ffmpeg: don't abuse a global for passing frame size from input to output
ffmpeg: don't abuse a global for passing pixel format from input to output
ffmpeg: initialise encoders earlier.
Conflicts:
cmdutils.c
doc/APIchanges
ffmpeg.c
ffplay.c
ffprobe.c
libavcodec/h264.c
libavformat/avformat.h
libavformat/utils.c
libavformat/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
By observation it did not seem to handle prev_frame_num > frame_num.
This does not affect any files I have.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
One of the causes of this bug is that the h264 parser defaults low_delay
to 1, but the h264 codec defaults low_delay to 0. Really Ugly.
After many hours of looking at this, I'm still not sure how has_b_frames
is *intended* to behave, but to me the implementation appears way more
complicated than it ought to be.
My patch relies on the encoder to set an optional field in the SPS. This
works for libx264 streams, but I'm not sure that all h264 encoders will
set it.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
swscale: remove misplaced comment.
ffmpeg: fix streaming to ffserver.
swscale: split out RGB48 output functions from yuv2packed[12X]_c().
build: move vpath directives to main Makefile
swscale: fix JPEG-range YUV scaling artifacts.
build: move ALLFFLIBS to a more logical place
ARM: factor some repetitive code into macros
Fix SVQ3 after adding 4:4:4 H.264 support
H.264: fix CODEC_FLAG_GRAY
4:4:4 H.264 decoding support
ac3enc: fix allocation of floating point samples.
Conflicts:
ffmpeg.c
libavcodec/dsputil_template.c
libavcodec/h264.c
libavcodec/mpegvideo.c
libavcodec/snow.c
libswscale/swscale.c
libswscale/swscale_internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (24 commits)
utils: Drop pointless '#if 1' preprocessor directive.
ac3enc: remove empty ac3_float function that is never called
ac3enc: split templated float vs. fixed functions into a separate file.
ac3enc: dynamically allocate AC3EncodeContext fields windowed_samples and mdct
ac3enc: use function pointer to choose between AC-3 and E-AC-3 header output functions.
Roll back 4:4:4 H.264 for now Needs some ARM/PPC asm modifications.
Fix SVQ3 after adding 4:4:4 H.264 support
H.264: fix CODEC_FLAG_GRAY
4:4:4 H.264 decoding support
h264_parser: Fix whitespace after previous change.
h264_parser: Fix behaviour when PARSER_FLAG_COMPLETE_FRAMES is set.
wav: remove an invalid free().
lavf: initialise reference_dts in av_estimate_timings_from_pts.
h264: don't be so picky on decoding pps in extradata.
avcodec.h: add or elaborate on some documentation comments.
h264: change a few comments into error messages
ac3dec: fix doxy-style for comment ("///>" should be "///<" instead).
img2: add .dpx to the list of supported file extensions.
ffv1: fix undefined behavior with insane widths.
ARM: jrevdct_arm: simplify stack usage
...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit a50f0bea25.
This has been implemented differently in qatar and its better they
maintain it for me instead of me having to spend an average 5sec more
per merge
Conflicts:
libavcodec/h264.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
By observation it did not seem to handle prev_frame_num > frame_num.
This does not affect any files I have.
(cherry picked from commit 43c0092a80f8212cbb783260bafa157f7b85126e)
* qatar/master:
configure: Add -U__STRICT_ANSI__ to CPPFLAGS on Cygwin and DOS.
aacdec: fix typo in scalefactor clipping check
fate: fix fate-h264-conformance-frext-pph10i4-panasonic-a crcs.
fate: update 9/10bit refs.
h264: Properly set coded_{width, height} when parsing H.264.
x86 asm: Add SECTION_TEXT to dct32_sse.asm.
Fix 9/10 bit in swscale.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* ffmpeg-mt/master:
Update todo.
h264: add an assert that copied pictures are valid picture pointers
valgrind-check: run with 1 and 3 threads
h264: When decoding a packet with multiple PPS/SPS, don't start the next thread until all of them have been read
Allow some pictures to be released earlier after 51ead6d2c40c5defdd211f435aec49b19f5f6a18
h264: fix slice threading MC reading uninitialized frame edges.
Please see ffmpeg-mt for a list of authors of these changes.
Conflicts:
libavcodec/h264.c
mt-work/valgrind-check.sh
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
qdm2: Use floating point synthesis filter.
h264: correct border check.
h264: fix loopfilter with threading at slice boundaries.
Fix ff_mpa_synth_filter_fixed() prototype
Rename costablegen.c ---> cos_tablegen.c.
Collapse tableprint.c into tableprint.h.
Simplify trig table rules
Remove potentially unstable filenames from comments in generated files.
Ignore generated tables and generated table generator programs.
Simplify CLEANFILES make variable by using wildcards.
Remove silly insults from avformat_version() Doxygen documentation.
mpegaudiodsp: fix x86 and ppc makefiles
configure: Adjust AVX assembler check.
mpegaudio: remove unused version of SAME_HEADER_MASK
mpegaudio: remove useless #undef at end of file
asfdec: add missing #include for av_bswap32()
mpegaudio: merge two #if CONFIG_FLOAT blocks
mpegaudio: move some struct definitions from mpegaudio.h
Move some mpegaudio functions to new mpegaudiodsp subsystem
Conflicts:
libavcodec/h264.c
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When backing up the top-left border, check that the top-left
(rather than left) MB indeed does belong to our slice. If it
doesn't, backing up has no positive effect but may accidentally
interfere with other threads writing in the same space.
Fixes occasional one-off effects when enabling slice-MT.
* qatar/master:
APIchanges: fill in date and commit for request_sample_fmt
Add floating-point sample format support to the ac3, eac3, dca, aac, and vorbis decoders.
Add support for request_sample_format in ffmpeg and ffplay.
Add APIchanges entry for request_sample_fmt.
Add request_sample_fmt field to AVCodecContext.
Add float_interleave() to FmtConvertContext with x86-optimized versions.
Remove unused make variable SEEK_REFFILE
fate: remove redundant aref and vref references
fate: remove do_ffmpeg_nocheck function
fate: do not collect -benchmark output
mpegaudiodec: remove decode_end() function
fate: run aref and vref as regular tests
mpegaudio: sanitise compute_antialias_* names
mpeg12: add slice-threading checks to slice-threading initializers.
h264: copy pixel_shift between slice threading contexts.
mdec: enable frame-level multithreading.
mdec.c: fix overread.
Conflicts:
libavcodec/aacdec.c
libavcodec/ac3dec.c
libavcodec/avcodec.h
libavcodec/dca.c
libavcodec/h264.c
libavcodec/mdec.c
libavcodec/mpeg12.c
libavcodec/options.c
libavcodec/version.h
libavcodec/vorbisdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (30 commits)
AVOptions: make default_val a union, as proposed in AVOption2.
arm/h264pred: add missing argument type.
h264dsp_mmx: place bracket outside #if/#endif block.
lavf/utils: fix ff_interleave_compare_dts corner case.
fate: add 10-bit H264 tests.
h264: do not print "too many references" warning for intra-only.
Enable decoding of high bit depth h264.
Adds 8-, 9- and 10-bit versions of some of the functions used by the h264 decoder.
Add support for higher QP values in h264.
Add the notion of pixel size in h264 related functions.
Make the h264 loop filter bit depth aware.
Template dsputil_template.c with respect to pixel size, etc.
Template h264idct_template.c with respect to pixel size, etc.
Preparatory patch for high bit depth h264 decoding support.
Move some functions in dsputil.c into a new file dsputil_template.c.
Move the functions in h264idct into a new file h264idct_template.c.
Move the functions in h264pred.c into a new file h264pred_template.c.
Preparatory patch for high bit depth h264 decoding support.
Add pixel formats for 9- and 10-bit yuv420p.
Choose h264 chroma dc dequant function dynamically.
...
Conflicts:
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/alpha/dsputil_alpha.c
libavcodec/arm/dsputil_init_arm.c
libavcodec/arm/dsputil_init_armv6.c
libavcodec/arm/dsputil_init_neon.c
libavcodec/arm/dsputil_iwmmxt.c
libavcodec/arm/h264pred_init_arm.c
libavcodec/bfin/dsputil_bfin.c
libavcodec/dsputil.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/h264_loopfilter.c
libavcodec/h264_ps.c
libavcodec/h264_refs.c
libavcodec/h264dsp.c
libavcodec/h264idct.c
libavcodec/h264pred.c
libavcodec/mlib/dsputil_mlib.c
libavcodec/options.c
libavcodec/ppc/dsputil_altivec.c
libavcodec/ppc/dsputil_ppc.c
libavcodec/ppc/h264_altivec.c
libavcodec/ps2/dsputil_mmi.c
libavcodec/sh4/dsputil_align.c
libavcodec/sh4/dsputil_sh4.c
libavcodec/sparc/dsputil_vis.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/dsputil_mmx.c
libavformat/options.c
libavformat/utils.c
libavutil/pixfmt.h
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/swscale_template.c
tests/ref/seek/lavf_avi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
One of the causes of this bug is that the h264 parser defaults low_delay
to 1, but the h264 codec defaults low_delay to 0. Really Ugly.
After many hours of looking at this, I'm still not sure how has_b_frames
is *intended* to behave, but to me the implementation appears way more
complicated than it ought to be.
My patch relies on the encoder to set an optional field in the SPS. This
works for libx264 streams, but I'm not sure that all h264 encoders will
set it.
* qatar/master:
Duplicate AMV: disable DR1 and don't override EMU_EDGE
Duplicate lavf: inspect more frames for fps when container time base is coarse
Wrong and we have correct fix: Fix races in default av_log handler
vorbis: Replace sized int_fast integer types with plain int/unsigned.
Remove disabled non-optimized code variants.
NO bswap.h: Remove disabled code.
Remove some disabled printf debug cruft.
Replace more disabled printf() calls by av_dlog().
NO tests: Remove disabled code.
NO Replace some commented-out debug printf() / av_log() messages with av_dlog().
vorbisdec: Replace some sizeof(type) by sizeof(*variable).
NO vf_fieldorder: Replace FFmpeg by Libav in license boilerplate.
Conflicts:
libavcodec/h264.c
libavcodec/vorbisdec.c
libavutil/log.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
APIChanges: document git revision for CODEC_CAP_SLICE_THREADS addition.
Introduce slice threads flag.
FATE: allow forcing thread-type when doing threaded fate runs.
Use av_log_ask_for_sample() where appropriate.
error: sort, pack, and align error code and string definitions
The stabilization period after version bumps should be one month, not one week.
applehttp: Expose the stream bitrate via metadata
doc: Add some initial docs on the applehttp demuxer
Provide a fallback version of the libm function trunc
libavdevice: Define _XOPEN_SOURCE for usleep
lavc: provide deprecated avcodec_thread_init until next major version
lavc: provide the opt.h header until the next bump
error: change AVERROR_EOF value
error: remove AVERROR_NUMEXPECTED
error: add error code AVERROR_OPTION_NOT_FOUND, and use it in opt.c
Conflicts:
libavcodec/h264.c
libavutil/error.c
libavutil/error.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* ffmpeg-mt/master:
Release unused pictures even when not calling ff_h264_frame_start()
h264: Fix decoding race condition with PAFF
h264: cosmetic whitespace change
Duplicate Fix REBASE_PICTURE with h.264
Not pulled Update test scripts to use ffmpeg instead of ffmpeg_g
Duplicate Fix ffmpeg-mt fixme in h264
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fixed-point MDCT with 32-bit unscaled output
lavc: deprecate rate_emu
lavc: mark hurry_up for removal on next major bump
parser: mark av_parser_parse() for removal on next major bump
lavc: add missing audioconvert includes
jvdec: don't use deprecated CODEC_TYPE_*/PKT_FLAG_KEY
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is pretty hopeless that other considerable projects will adopt
libavutil alone in other projects. Projects that need small footprint
are better off with more specialized libraries such as gnulib or rather
just copy the necessary parts that they need. With this in mind, nobody
is helped by having libavutil and libavcore split. In order to ease
maintenance inside and around FFmpeg and to reduce confusion where to
put common code, avcore's functionality is merged (back) to avutil.
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
None of these symbols should be accessed directly, so declare them as
hidden.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit d36beb3f69)
The header is empty after making the function static, so delete it and
drop its usage.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
(cherry picked from commit 13eb6b9097)
Don't free RBSP tables (containing decoded NAL units) on resolution
change, because we actually need this data to decode the frame after
reiniting (with new resolution). Fixed issue 2393.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
(cherry picked from commit 9107892624)
It's incomplete, no one is working on it, and when someone asks about
working on it we advise them not to.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit ff3d43104f)
Don't free RBSP tables (containing decoded NAL units) on resolution
change, because we actually need this data to decode the frame after
reiniting (with new resolution). Fixed issue 2393.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
It's incomplete, no one is working on it, and when someone asks about
working on it we advise them not to.
Signed-off-by: Mans Rullgard <mans@mansr.com>
No speed improvement, but necessary for some future stuff.
Also opens up the possibility of asm chroma dc idct/dequant.
Originally committed as revision 26349 to svn://svn.ffmpeg.org/ffmpeg/trunk
Doesn't help speed as there isn't an asm implementation yet, but consistency
is a good thing.
Originally committed as revision 26348 to svn://svn.ffmpeg.org/ffmpeg/trunk
Useful so that we don't have to run the hierarchical DC iDCT if there aren't
any coefficients. Opens up some future opportunities for optimization as well.
Originally committed as revision 26337 to svn://svn.ffmpeg.org/ffmpeg/trunk
About 2.5x the speed.
NOTE: the way that the asm code handles large qmuls is a bit suboptimal.
If x264-style dequant was used (separate shift and qmul values), it might
be possible to get some extra speed.
Originally committed as revision 26336 to svn://svn.ffmpeg.org/ffmpeg/trunk
It was an ugly hack to begin with and didn't give any performance.
NOTE: this patch opens up some future simplifications to be made (such as
removing some of the scantables from H264Context) but doesn't take advantage
of them yet.
Originally committed as revision 26329 to svn://svn.ffmpeg.org/ffmpeg/trunk
svq3 still doesn't support multithreading, but it's simpler for clients if
they can enable threading for all codecs by default.
Originally committed as revision 26015 to svn://svn.ffmpeg.org/ffmpeg/trunk
Contrary to progressive, just being able to crop up to 14/15 pixels
is not enough to encode all supported resolutions, and the new
behaviour is also consistent with e.g. MPEG-2 etc.
Originally committed as revision 25669 to svn://svn.ffmpeg.org/ffmpeg/trunk
r25218 made assumptions about the existence of past reference frames that
weren't necessarily true.
Originally committed as revision 25243 to svn://svn.ffmpeg.org/ffmpeg/trunk
h264dsp_mmx.c to h264_idct.asm (as yasm code). Because the loops are now
coded in asm instead of C, this is (depending on the function) up to 50%
faster for cases where gcc didn't do a great job at looping.
Since h264_idct_add8() is now faster than the manual loop setup in h264.c,
in-asm idct calling can now be enabled for chroma as well (see r16207). For
MMX, this is 5% faster. For SSE2 (which isn't done for chroma if h264.c does
the looping), this makes it up to 50% faster. Speed gain overall is ~0.5-1.0%.
Originally committed as revision 25119 to svn://svn.ffmpeg.org/ffmpeg/trunk
Passing an explicit filename to this command is only necessary if the
documentation in the @file block refers to a file different from the
one the block resides in.
Originally committed as revision 22921 to svn://svn.ffmpeg.org/ffmpeg/trunk
The function is only used within that file, so it makes sense to place
it there. This fixes many warnings of the type:
h264.h:1170: warning: ‘fill_filter_caches’ defined but not used
Originally committed as revision 22876 to svn://svn.ffmpeg.org/ffmpeg/trunk
start of decoding a picture instead of at the end.
Fixes mmco01.264
Patch by Stephen Warren
Originally committed as revision 22728 to svn://svn.ffmpeg.org/ffmpeg/trunk
change, not only size changes.
Patch by Janusz Krzysztofik foo=zyszt <jkr$foo@tis.icnet.pl>.
Originally committed as revision 22597 to svn://svn.ffmpeg.org/ffmpeg/trunk
This moves the H264-specific functions from DSPContext to the new
H264DSPContext. The code is made conditional on CONFIG_H264DSP
which is set by the codecs requiring it.
The qpel and chroma MC functions are not moved as these are used by
non-h264 code.
Originally committed as revision 22565 to svn://svn.ffmpeg.org/ffmpeg/trunk
Previously, the area of a lost slice would be left at the slice number of the previous
frame which could occasionally match the number of the next slice and thus a non existing
slice could have been used for prediction leading to additional decoding errors in otherwise
undamaged slices.
Originally committed as revision 22483 to svn://svn.ffmpeg.org/ffmpeg/trunk
This fixes playback of such streams with ffplay (but does not affect
current ffmpeg).
Patch by Janusz Krzysztofik, jkrzyszt A tis D icnet D pl
Originally committed as revision 22112 to svn://svn.ffmpeg.org/ffmpeg/trunk
about 5 cpu cycles slower in the local code but should be overall faster
due to reduced cache use. (my sample though has too few intra4x4 blocks
for this to be meassureable easily either way)
Originally committed as revision 22052 to svn://svn.ffmpeg.org/ffmpeg/trunk
The code read/write code itself was 1 cycle faster, overall its
likely more due to cache effects
Originally committed as revision 22048 to svn://svn.ffmpeg.org/ffmpeg/trunk
This eliminates all aliasing violation warnings in h264 code.
No measurable speed difference with gcc-4.4.3 on i7.
Originally committed as revision 21881 to svn://svn.ffmpeg.org/ffmpeg/trunk
the row code. This function would only be needed on a MB basis for MBAFF+FMO
Originally committed as revision 21860 to svn://svn.ffmpeg.org/ffmpeg/trunk
This should fix a segfault, also it might be faster on systems where the
+52 wasnt free.
Originally committed as revision 21406 to svn://svn.ffmpeg.org/ffmpeg/trunk
loop filter. This removes one obstacle of getting ff_h264_filter_mb_fast()
bitexact. code is maybe 0.1% faster
Originally committed as revision 21280 to svn://svn.ffmpeg.org/ffmpeg/trunk
Run loop filter per row instead of per MB, this also should make it
much easier to switch to per frame filtering and also doing so in a
seperate thread in the future if some volunteer wants to try.
Overall decoding speedup of 1.7% (single thread on pentium dual / cathedral sample)
This change also allows some optimizations to be tried that would not have
been possible before.
Originally committed as revision 21270 to svn://svn.ffmpeg.org/ffmpeg/trunk
Seems to speed the code up a little...
The placement of many generic functions between h264.c and h264.h is still open
Currently they are a little randomly placed between them.
Originally committed as revision 21178 to svn://svn.ffmpeg.org/ffmpeg/trunk
called once per MB in worst case and doesnt seem to benefit from static inline.
Actually the code might be a hair faster now (0.1% according to my benchmark but
this could be random noise)
Originally committed as revision 21173 to svn://svn.ffmpeg.org/ffmpeg/trunk
no speedloss meassured, also its really not touching anything that is speed relevant.
Originally committed as revision 21169 to svn://svn.ffmpeg.org/ffmpeg/trunk
No speedloss meassured (its slightly faster here but that may be random fluctuations)
Originally committed as revision 21165 to svn://svn.ffmpeg.org/ffmpeg/trunk
functions called more than per mb are moved into the header, scan8 is also
as it must be known at compiletime.
The code after this patch duplicates h264data.h, this has been done to minimize
the changes in this step and allow more fine grained benchmarking.
Speedwise this is 1% faster on my pentium dual core with diegos cursed cathedral
sample.
Originally committed as revision 21157 to svn://svn.ffmpeg.org/ffmpeg/trunk
decoder which allows their usage without checking profile_idc.
Patch by Laurent Aimar (fenrir (AT) videolan org)
Originally committed as revision 21107 to svn://svn.ffmpeg.org/ffmpeg/trunk
Files with invalid VUI are now rejected like
other invalid SPS are.
Fixes issue1231.
Originally committed as revision 19335 to svn://svn.ffmpeg.org/ffmpeg/trunk
Before, the decoder could interpret a corrupt frame
as a NAL_DPA and NAL_DPC, and then start decoding
even if decode_slice_header() returned an error.
This frequently caused crashes.
Fixes issue1228, issue1229, and partially issue1238.
Originally committed as revision 19328 to svn://svn.ffmpeg.org/ffmpeg/trunk
First, reverted one was r19239.
Patch by Haruhiko Yamagata, h D yamagata A nifty D com
Originally committed as revision 19258 to svn://svn.ffmpeg.org/ffmpeg/trunk
The threads' contexts and rbsp_buffers were not freed at the end
of decoding.
Fixes issue 1581
Originally committed as revision 19207 to svn://svn.ffmpeg.org/ffmpeg/trunk
This ensures that the MMX loop filter is always bitexact with the C version.
Patch by Haruhiko Yamagata <h.yamagata _a_ nifty com>
Originally committed as revision 18923 to svn://svn.ffmpeg.org/ffmpeg/trunk
