nasm does not support 'CPU foonop' directives. This adds a configure
test for the directive and uses it only if supported.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This installs libraries using the proper names and locations,
generates an import lib for the DLL, and drops no longer needed
linker flags.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This simplifies adding extra flags for individual programs
and also allows more than one object file per program.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Refactoring mmx2/mmxext YASM code with cpuflags will force renames.
So switching to a consistent naming scheme beforehand is sensible.
The name "mmxext" is more official and widespread and also the name
of the CPU flag, as reported e.g. by the Linux kernel.
This allows non-standard replacements for the -c compiler flag.
Some compilers use other flags or no flag at all in place of
the usual one.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This allows using non-standard flags for running the C preprocessor.
The -o flag must be included in this setting due to strange syntax
required by some compilers.
Set the correct flags for tms470.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This adds a full identification probe of CC, AS, LD and HOSTCC,
and sets up correct flags and dependency tracking for each.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The rtmpts protocol uses https implicitly, via the ffrtmphttp
protocol, but the ffrtmphttp protocol is also useable for plain
rtmpt without https, so the dependency needs to be added here instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPE protocol implementation uses ffrtmpcrypt:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use compiler-specific replacements for the -o flag in check_cc.
This makes tests work properly with compilers using non-standard
flags.
The tms470 flags are updated to work with this scheme.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The incompatibility with librtmp is already expressed in the ffrtmphttp
protocol dependency declaration, which both RTMPT and RTMPTS depend on.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This allows filtering of linker flags the same was as already
supported for CFLAGS. The filter must be initialised to 'echo'
early since it is invoked by --extra-ldflags.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This is not used and the current design would not work properly
if mixing tools needing different filters.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This is only used for checking for a certain library, but the code
doesn't need to know whether the function was found.
Signed-off-by: Martin Storsjö <martin@martin.st>
The actual result of the check isn't used anywhere (since we
use this function unconditionally within #ifdef _WIN32), but it
makes sure we explicitly link to shell32 (which is linked in
implictly on mingw).
Signed-off-by: Martin Storsjö <martin@martin.st>
This function is only available in the headers if unconditionally
targeting a version >= XP. It is not strictly necessary, since we
try loading these functions dynamically at runtime on windows in
the fallback, but this makes things a bit faster and more
straightforward.
On mingw32, this function isn't visible by default, while it is
on mingw64 (on both 32 and 64 bit).
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows compiling and running these tests on systems lacking a built-
in version of getopt(), such as MSVC.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This simplifies testing arbitrary code fragments within a function
body.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Currently, --enable-small turns av_always_inline into plain inline,
which is more or less ignored by the compiler. While the intent of
this is probably to reduce code size by avoiding some inlining, it
has more far-reaching effects.
We use av_always_inline in two situations:
1. The body of a function is smaller than the call overhead.
Instances of these are abundant in libavutil, the bswap.h
functions being good examples.
2. The function is a template relying on constant propagation
through inlined calls for sane code generation. These are
often found in motion compensation code.
Both of these types of functions should be inlined even if targeting
small code size.
Although GCC has heuristics for detecting the first of these types,
it is not always reliable, especially when the function uses inline
assembler, which is often the reason for having those functions in
the first place, so making it explicit is generally a good idea.
The size increase from inlining template-type functions is usually
much smaller than it seems due to different branches being mutually
exclusive between the different invocations. The dead branches can,
however, only be removed after inlining and constant propagation have
been performed, which means the initial cost estimate for inlining
these is much higher than is actually the case, resulting in GCC
often making bad choices if left to its own devices.
Furthermore, the GCC inliner limits how much it allows a function to
grow due to automatic inlining of calls, and this appears to not take
call overhead into account. When nested inlining is used, the limit
may be hit before the innermost level is reached. In some cases, this
has prevented inlining of type 1 functions as defined above, resulting
in significant performance loss.
Signed-off-by: Mans Rullgard <mans@mansr.com>
We need to include winsock2.h here, to make sure we have the
real pollfd struct definition, if one exists, before defining the
fallback poll function.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is included for the open/read/write/close functions. On
MSVC, where this header does not exist, the same functions
are provided by io.h, which is already included.
On windows, these functions are provided by io.h. Make sure
io.h is included if it exists, regardless of the setmode
function.
Signed-off-by: Martin Storsjö <martin@martin.st>
Apparently, some build environments require dxva.h even for dxva2,
while others lack this header entirely. Including it conditionally
allows building in both cases.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds a fallback for cbrtf() using powf(x, 1/3). Since
powf() with a non-integer exponent requires a non-negative
base, special handling of negative inputs is needed.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Apparently this include is needed on some systems for building the
poll fallback (for the timeval struct for select?), but it isn't
available on all systems. Thus only include it if it exists.
Signed-off-by: Martin Storsjö <martin@martin.st>
This function implements a delay using the first available
of the following functions:
- nanosleep()
- usleep()
- Sleep() (Windows)
The conditional #includes in time.c are simplified by including
unistd.h and windows.h whenever they are available rather than
having these lines triggered by specific functions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The check uses check_func_header, since this function is
conditionally available depending on the targeted MSVCRT
version.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPT protocol implementation uses rtmphttp:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds the avoption mpegts_flags and converts the existing
resend_headers option into a flag, keeping the old option as
fallback for now.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This removes the dependency on adts.c internals, and simplifies
adding other packetization formats.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
FATE_SAMPLES is now used directly by the Makefiles, which induces the test
system to run a test with the value of the environment variable as name.
Renaming the environment variable to LIBAV_SAMPLES avoids this problem.
This disables the warning "external declaration in primary source file"
which is issued when a prototype for an extern function is found in a
.c file rather than a header file. We have such prototypes for asm
functions where a separate header file would be pointless.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The fields in config.fate are colon-separated so any colons
within the fields should be escaped to prevent confusion.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Since the mandatory memcpy in vsrc_buffer has been eliminated, there
shouldn't be any significant reason to build without lavfi anymore.
This will make upcoming support for complex filtergraphs easier to do.
This one is available both in SDL 1.2 and in 1.3 (which is the current
version available e.g. in macports), while 1.3 doesn't contain
SDL_Linked_Version().
The current check for SDL_Linked_Version() (available since SDL 1.2.13)
was added in 8f1b06c8, because including the headers for SDL_Init()
redirects the main() function, requiring the main function signature
to match the one of SDL_main (including argc/argv).
Signed-off-by: Martin Storsjö <martin@martin.st>
