Anton Khirnov
2361e59b98
lavc: use avpriv_ prefix for ff_dirac_parse_sequence_header.
...
It's used in lavf.
2011-10-20 21:06:58 +02:00
Anton Khirnov
242c73a0fd
lavc: use avpriv_ prefix for some dv symbols used in lavf.
...
Specifically, ff_dv_frame_profile and ff_dv_codec_profile.
2011-10-20 21:06:58 +02:00
Anton Khirnov
d9cca9fc6a
lavc: use avpriv_ prefix for some flac symbols used in lavf.
...
Specifically, ff_flac_parse_streaminfo, ff_flac_is_extradata_valid and
ff_flac_parse_block_header
2011-10-20 21:06:58 +02:00
Anton Khirnov
59a9a23581
lavc: use avpriv_ prefix for some mpeg4audio symbols used in lavf.
...
Specifically, ff_mpeg4audio_sample_rates, ff_mpeg4audio_get_config and
ff_copy_pce_data
2011-10-20 21:06:57 +02:00
Anton Khirnov
82ab61f901
lavc: use avpriv_ prefix for some mpegaudio symbols used in lavf.
...
Specifically, ff_mpa_freq_tab, ff_mpa_bitrate_tab, ff_mpa_decode_header,
ff_mpegaudio_decode_header.
2011-10-20 21:06:57 +02:00
Anton Khirnov
73ae27e17b
lavc: use avpriv_ prefix for ff_aac_parse_header().
...
It's used in lavf.
2011-10-20 21:06:57 +02:00
Anton Khirnov
8d74bf17c6
lavf: hide private symbols.
...
Overhead as reported by rbelf-size goes from 40147 to 20877.
2011-10-20 21:06:45 +02:00
Anton Khirnov
ab88b25f99
lavf: use avpriv_ prefix for some dv functions.
...
They are used in libavdevice.
2011-10-20 20:57:23 +02:00
Anton Khirnov
1fa395e471
lavf: use avpriv_ prefix for ff_new_chapter().
...
It's used in libavdevice.
2011-10-20 20:57:23 +02:00
Justin Ruggles
68d3aec819
avcodec: add CODEC_CAP_DELAY note to avcodec_decode_audio3() documentation
2011-10-20 13:30:08 -04:00
Justin Ruggles
352fc5f128
avcodec: clarify the CODEC_CAP_DELAY note in avcodec_decode_video2()
2011-10-20 13:30:08 -04:00
Justin Ruggles
ffeeae923b
avcodec: clarify documentation of CODEC_CAP_DELAY
2011-10-20 13:30:08 -04:00
Justin Ruggles
1baa25c7da
shorten: fix end-of-stream decoding.
...
enable CODEC_CAP_DELAY to flush any remaining frames in the buffer.
Stop decoding when the FN_QUIT command is found so that a trailing seek table
isn't decoded as a normal frame.
decode all channels in the same call to avcodec_decode_audio3() so that
decoding will not stop after the first channel of the last frame.
Updated FATE reference. More valid audio is now decoded.
2011-10-20 13:09:46 -04:00
Justin Ruggles
d03f9f65c0
shorten: do not use block size to determine whether to read the header.
2011-10-20 13:09:46 -04:00
Justin Ruggles
882dafe9b6
shorten: check output buffer size before decoding
2011-10-20 13:09:26 -04:00
Justin Ruggles
bd7f7d6c78
shorten: use av_clip_int16() for output sample clipping
2011-10-20 13:09:26 -04:00
Justin Ruggles
069ada46c1
shorten: use bytestream functions to decode the embedded WAVE header
2011-10-20 13:09:25 -04:00
Justin Ruggles
c25762fcf1
shorten: add some comments
2011-10-20 13:09:25 -04:00
Justin Ruggles
15d146c958
shorten: merge decoding of FN_DIFF* subblocks into decode_subframe_lpc()
2011-10-20 13:09:25 -04:00
Justin Ruggles
034f42dfce
cosmetics: remove some needless commented-out stuff
2011-10-20 13:09:25 -04:00
Justin Ruggles
cfa317f67d
shorten: validate block size
2011-10-20 13:09:25 -04:00
Justin Ruggles
45d7d31fb9
shorten: move declaration of 'ret' to top of shorten_decode_frame()
2011-10-20 13:09:25 -04:00
Justin Ruggles
a8055992c0
shorten: pass on error value from allocate_buffers() instead of returning -1
2011-10-20 13:09:25 -04:00
Justin Ruggles
9e5e2c2d01
shorten: check for realloc failure
2011-10-20 13:09:25 -04:00
Justin Ruggles
fe31a637f1
shorten: move decoding of prediction order and applying of global offset to
...
decode_subframe_lpc().
2011-10-20 13:09:25 -04:00
Justin Ruggles
0f97c5014b
shorten: only calculate output size when returning decoded samples, otherwise
...
just set data_size to zero.
2011-10-20 13:09:25 -04:00
Justin Ruggles
e9e37f2d10
cosmetics: reindent
2011-10-20 13:09:25 -04:00
Justin Ruggles
9000b6db22
shorten: separate processing of audio commands from non-audio commands
2011-10-20 13:09:25 -04:00
Justin Ruggles
07745485ef
shorten: skip some fields in the WAV header embedded in the shorten header.
...
fixes incorrect bitrate reporting and potential misreporting of the number of
channels.
2011-10-20 13:09:25 -04:00
Justin Ruggles
a1f7885a8b
shorten: split reading of file header into a separate functions
2011-10-20 13:09:25 -04:00
Justin Ruggles
9ef6c7977f
avformat: do not require frame_size for Speex.
...
Having it there forces decoding of a frame in order to get frame_size, but it
is not really needed for proper demuxing or decoding.
2011-10-20 13:06:16 -04:00
Justin Ruggles
0e69c04773
ogg/speex: set correct timestamp and duration for the first packet.
...
The first timestamp should be negative due to delay.
Also, do not set AVCodecContext.frame_size unnecessarily.
2011-10-20 13:06:16 -04:00
Justin Ruggles
4ee247a2bd
flvenc: check packet duration in speex using timestamps
...
Using AVCodecContext.frame_size is not reliable.
2011-10-20 13:06:16 -04:00
Justin Ruggles
b606a01759
libspeexenc: add libspeex encoder
2011-10-20 13:06:15 -04:00
Justin Ruggles
52375ba567
flvenc: adjust for negative DTS for all codecs, not just H.264
2011-10-20 13:06:15 -04:00
Diego Biurrun
265980dabc
x86: Move some variable declarations below the appropriat #ifdef.
...
This avoids some unused variable warnings with YASM disabled.
2011-10-20 16:19:27 +02:00
Diego Biurrun
2cb7c81669
x86: Fix linking of ProRes DSP ASM with YASM disabled.
2011-10-20 16:19:13 +02:00
Diego Biurrun
463ea05ab2
avcodec.h: Move G.729/G.723 CODEC_IDs to the correct section.
...
This is done conditional to the libavcodec version to avoid ABI breaks.
2011-10-20 00:19:19 +02:00
Diego Biurrun
26af0953c0
Only test-compile w32pthreads.h if W32THREADS are available.
...
This fixes 'make checkheaders' on non-W32THREADS systems.
2011-10-20 00:18:29 +02:00
Janne Grunau
8096fdf0b6
presets: rename presets directory
2011-10-19 21:20:17 +02:00
Anton Khirnov
f0eeff708a
lavc: make avcodec_get_context_defaults3 "officially" public
...
Deprecate avcodec_get_context_defaults/avcodec_get_context_defaults2
2011-10-19 17:02:11 +02:00
Anton Khirnov
84ad31ff18
lavf: replace av_new_stream->avformat_new_stream part II.
...
Manual replacements are done in this commit.
In many cases, the id is some constant made up number (e.g. 0 for video
and 1 for audio), which is then not used in the demuxer for anything.
Those ids are removed.
2011-10-19 17:02:11 +02:00
Anton Khirnov
3b3bbdd3e6
lavf,lavd: replace av_new_stream->avformat_new_stream part I.
...
Trivial replacements with sed are done in this commit:
sed 's/av_new_stream(\([^)]*\), 0)/avformat_new_stream(\1, NULL)/'
2011-10-19 17:02:11 +02:00
Anton Khirnov
569129a6dc
lavf: add avformat_new_stream as a replacement for av_new_stream.
...
It takes a codec parameter, thus enabling codec-specific defaults.
2011-10-19 17:02:11 +02:00
Mashiat Sarker Shakkhar
73447eb4bd
Use correct scaling table for bwd-pred MVs in second B-field
...
When scaling backward predicted MVs in second B-field, the scaling table is
opposite of that for P field pictures; i.e. first field P table will be used as
second field B table and second field P table will be used as first field B
table. This is not documented in the spec, but exists in the ref. decoder.
This fixes SA10139.
Signed-off-by: Martin Storsjö <martin@martin.st>
2011-10-19 16:42:47 +03:00
Kostya Shishkov
0d8506b8c5
Ut Video decoder
...
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-10-19 08:24:19 +02:00
Anton Khirnov
df3ca34a56
Makefile: change presets extension to .avpreset
...
Fixes make install.
2011-10-19 07:50:12 +02:00
Stefano Sabatini
ec2ac9271c
lavfi: add rgbtestsrc source, ported from MPlayer libmpcodecs
...
The licence was changed from GPL to LGPL with explicit approval from
the original author.
See thread:
Subject: [FFmpeg-devel] [PATCH] lavfi: add rgbtestsrc source,
ported from MPlayer libmpcodecs
Date: Mon, 11 Jul 2011 16:32:41 +0200
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-10-19 07:09:08 +02:00
Stefano Sabatini
0244879f30
lavfi: add testsrc source
...
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-10-19 07:08:42 +02:00
Anton Khirnov
4e64c4d51a
AVOptions: add documentation.
2011-10-19 06:59:58 +02:00