Improved DVB subtitles encoder to generate AVPacket.data in the same
format as generates MPEGTS demuxer + DVB subtitles parser. So now single
format of DVB subtitles data is used across all the components of FFmpeg:
only subtitles payload WITHOUT 0x20 0x00 bytes at the beginning and 0xFF
trailing byte.
Improved MPEGTS muxer to support format of DVB subtitles in
AVPacket.data described above: while muxing we add two bytes 0x20 0x00 to
the beginning of and 0xFF to the end of DVB subtitles payload.
The patch fixes DVB subtitle copy problems: tickets #2989 fully and #2024
partly.
Signed-off-by: Clément Bœsch <u@pkh.me>
This makes the USE_FLOATS == 0 available to the end user
More float optimizations can easily be added as well now
common code should be factored out into a common file once all
fixed point & floating point optimizations are done, this is to
avoid having to move code back and forth between files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Originally written by Ronald S. Bultje <rsbultje@gmail.com> and
Clément Bœsch <u@pkh.me>
Further contributions by:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit 'b6094811f9fca66cdf853420696e96fdc3e4987a':
lavc: move MB_TYPE_* macros from avcodec.h to mpegvideo.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b45c87083de67969c1598cfef41e7c947b137922':
lavc: schedule unused FF_QSCALE_TYPE_* for removal on next bump
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8941971a8f2e24b9a84fe29f128d13ceb89c0a65':
lavc: make error_rate a private option of mpegvideo encoders
Conflicts:
libavcodec/options_table.h
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ca22d1dea2842fca0422dd1d2bd09e7eb2c8f118':
vdpau: add a convenience function for getting a decoder profile.
Conflicts:
doc/APIchanges
libavcodec/vdpau.c
libavcodec/vdpau.h
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c7f7bfc9e3a3150ba72bc34366c13fb2210c66ac':
Remove all Alpha architecture optimizations
Conflicts:
libavcodec/alpha/asm.h
libavcodec/alpha/dsputil_alpha.c
libavcodec/alpha/dsputil_alpha.h
libavcodec/alpha/dsputil_alpha_asm.S
libavcodec/alpha/hpeldsp_alpha.c
libavcodec/alpha/hpeldsp_alpha.h
libavcodec/alpha/hpeldsp_alpha_asm.S
libavcodec/alpha/motion_est_alpha.c
libavcodec/alpha/motion_est_mvi_asm.S
libavcodec/alpha/mpegvideo_alpha.c
libavcodec/alpha/regdef.h
libavcodec/alpha/simple_idct_alpha.c
We have a qemu based fate alpha client. And various failures
on alpha have previously pointed to issues in generic C code.
Thus IMHO it makes sense to keep alpha code as long as someone
is willing to do the little bit of maintaince it needs
Merged-by: Michael Niedermayer <michaelni@gmx.at>
XvMC has long ago been superseded by newer acceleration APIs, such as
VDPAU, and few downstreams still support it. Furthermore XvMC is not
implemented within the hwaccel framework, but requires its own specific
code in the MPEG-1/2 decoder, which is a maintenance burden.
* commit '38ecc3702dabbea09230f6d6333f59e74f5d1c12':
pthread: store thread contexts in AVCodecInternal instead of AVCodecContext
Conflicts:
libavcodec/internal.h
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also make AVCODEC_RESAMPLE API removal depends on its presence, since its
code depends on it as well.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
* commit '28240a60c1b5ce276e947ba013271ec009adc078':
lavc: move FF_ASPECT_EXTENDED from avcodec.h to h263.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0300962b76644f145b773439989a5cdf1667e162':
lavc: schedule FF_BUG_AC_VLC for removal on the next major bump.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ccc71298456d97f64f539e303c771d04dcb33c53':
lavc: deprecate FF_DEBUG_MV and remove all traces of its use
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Initially written by Guillaume Martres <smarter@ubuntu.com> as a GSoC
project. Further contributions by the OpenHEVC project and other
developers, namely:
Mickaël Raulet <mraulet@insa-rennes.fr>
Seppo Tomperi <seppo.tomperi@vtt.fi>
Gildas Cocherel <gildas.cocherel@laposte.net>
Khaled Jerbi <khaled_jerbi@yahoo.fr>
Wassim Hamidouche <wassim.hamidouche@insa-rennes.fr>
Vittorio Giovara <vittorio.giovara@gmail.com>
Jan Ekström <jeebjp@gmail.com>
Anton Khirnov <anton@khirnov.net>
Martin Storsjö <martin@martin.st>
Luca Barbato <lu_zero@gentoo.org>
Yusuke Nakamura <muken.the.vfrmaniac@gmail.com>
Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Diego Biurrun <diego@biurrun.de>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This patch adds CODEC_CAP_DELAY support to avcodec_decode_subtitle2.
For DVB teletext decoding, a single teletext packet can contain multiple
teletext pages. In order to support that, the teletext decoder may buffer
some pages.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Define positive return values as non errors and leave further meaning undefined
This allows future extensions to use these values
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Initially written by Guillaume Martres <smarter@ubuntu.com> as a GSoC
project. Further contributions by the OpenHEVC project and other
developers, namely:
Mickaël Raulet <mraulet@insa-rennes.fr>
Seppo Tomperi <seppo.tomperi@vtt.fi>
Gildas Cocherel <gildas.cocherel@laposte.net>
Khaled Jerbi <khaled_jerbi@yahoo.fr>
Wassim Hamidouche <wassim.hamidouche@insa-rennes.fr>
Vittorio Giovara <vittorio.giovara@gmail.com>
Jan Ekström <jeebjp@gmail.com>
Anton Khirnov <anton@khirnov.net>
Martin Storsjö <martin@martin.st>
Luca Barbato <lu_zero@gentoo.org>
Yusuke Nakamura <muken.the.vfrmaniac@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
seek_preroll field is added to the AVCodecContext struct. It indicates
the number of samples to be discarded whenever there is a discontinuity.
The minor version is bumped accordingly.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c4bfa098072ba338d83555d6e2199f7e1e64ffff':
Add a WebP decoder
Conflicts:
Changelog
doc/general.texi
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/version.h
libavformat/img2.c
The previously existing webp decoder is disabled as the new
one supports lossless mode and alpha while the previous does not.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Based on a patch by Wolfram Gloger <wmglo@dent.med.uni-muenchen.de>.
http://lists.ffmpeg.org/pipermail/ffmpeg-devel/2012-December/136677.html
The original patch was rebased by Tudor SUCIU <tudor.suciu@gmail.com>.
Lots of additional features and fixes are made by me.
Fixes ticket #2086.
Changes since last version:
- change default page to all pages
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Remove the header decoding for PCM audio from mpeg.c and the
20/24bit parts from pcm.c and merge them into a new decoder in
pcm-dvd.c.
The decoder has added support for samples that span multiple
packets and modified 20/24bit group decoding. Both is needed to
decode samples that have been generated with DVD-Lab Pro 2. The
decoding of 16bit PCM and two channel 24bit is identical to
before. No other samples are known to verify the correctness of
the encoding this software does.
The complete list of tested formats is
48kHz/16bit/2-8 channels
48kHz/24bit/2-5 channels
96kHz/16bit/2-4 channels
96kHz/24bit/2 channels
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Using VDPAU correctly means checking for preemption
and possibly regenerating the context all the time.
With the current API there is no context or other
user-defined pointer and thus this in not possible
during decoding unless using some hack like global
variables.
The need to reinitialize both surfaces and even function
pointers makes handling preemption even more difficult.
This patch introduces a new render2 function that gets
both the AVCodecContext and AVFrame in addition,
in both the user can store additional opaque data.
This allows even advanced approaches like keeping a
"generation counter" for the surfaces so they can be
regenerated on the fly and efficiently.
In addition, the function has a return value that will
be passed through all the way instead of being silently
ignored as for the current render function.
Unfortunately the HWAccel API has no way of providing
API/ABI compatibility, so a currently disallowed
state (render pointer being NULL) is used to extend it.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The bitstream buffers are now private and freed by libavcodec. For
backward compatibility, the hold bitstream buffer pointer is left NULL
(applications were supposed to av_freep() it).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The method guess_ni_flag needs to divide timestamps in the index
by sample_size if it is set in order to compare different streams correctly.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '502ab21af0ca68f76d6112722c46d2f35c004053':
x86: lpc: simd av_update_lls
The versions are bumped due to changes in lls.h which is used across
libraries affecting intra library ABI
(This version bump also covers changes to lls.h in the immedeatly previous
commits)
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '41578f70cf8aec8e7565fba1ca7e07f3dc46c3d2':
lpc: use function pointers, in preparation for asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently the WebVTT demuxer parses the cues but throws away
the cue id (the optional first line of the cue) and cue
settings (the optional rendering instructions that follow
the timestamp).
However, in order to write inband text tracks (to WebM
files), the entire cue payload from the WebVTT source must
be preserved.
This commit makes no change to the data part of the output
buffer packet (where the actual cue text is stored), but
does add the cue id and settings as a side data items, if
they're present in the cue. Existing code that cares only
about the data part of the packet can continue to ignore the
side data.
There are two new packet data type flags,
AV_PKT_DATA_WEBVTT_IDENTIFIER and
AV_PKT_DATA_WEBVTT_SETTINGS.
* commit '728214992e3698305550c1762f973d2ac567f016':
vc1dec: Remove interlaced warning
vc1dec: Fix mixed field/frame intensity compensation
vc1dec: Match addressing between compensation and MC in vc1_mc_4mv_chroma4
vc1dec: Handle top and bottom blocks in vc1_mc_4mv_chroma4() differently if needed
vc1dec: Fix doxy for vc1_mc_4mv_chroma4()
vc1dec: Drop old use_ic code from vc1_b_mc
vc1: Use shuffled use_ic instead of equally shuffled mv_mode
vc1dec: Implement intensity compensation for vc1_interp_mc()
Conflicts:
Changelog
libavcodec/vc1dec.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some fixes provided by Paul B Mahol <onemda@gmail.com>
and Michael Niedermayer <michaelni@gmx.at> and me.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* commit '507b1e454cf9953da3e18f33c9bd1fca78c97cb5':
avcodec: Add field order information to AVCodecParserContext.
Conflicts:
doc/APIchanges
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '803d21f38bdafe7c4e2571a9ae7052013a12923b':
lavc: schedule AVCodecContext.lowres for removal on next bump.
Conflicts:
libavcodec/avcodec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avcodec: Bump minor for JPEG 2000 decoder
JPEG 2000 decoder for DCinema
The mqc code is merged, the rest is added independent of
the existing jpeg2000 decoder and encoder.
Conflicts:
Changelog
doc/general.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/mqc.c
libavcodec/mqc.h
libavcodec/mqcdec.c
libavcodec/version.h
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA
markup is muxed in a standalone .ass/.ssa file. This means the AVPacket
data starts with a "Dialogue:" string, followed by a timing information
(start and end of the event as string) and a trailing CRLF after each
line. One packet can contain several lines. We'll refer to this layout
as "SSA" or "SSA lines".
In matroska, this markup is not stored as such: it has no "Dialogue:"
prefix, it contains a ReadOrder field, the timing information is not in
the payload, and it doesn't contain the trailing CRLF. See [1] for more
info. We'll refer to this layout as "ASS".
Since we have only one common codec for both formats, the matroska
demuxer is constructing an AVPacket following the "SSA lines" format.
This causes several problems, so it was decided to change this into
clean ASS packets.
Some insight about what is changed or unchanged in this commit:
CODECS
------
- the decoding process still writes "SSA lines" markup inside the ass
fields of the subtitles rectangles (sub->rects[n]->ass), which is
still the current common way of representing decoded subtitles
markup. It is meant to change later.
- new ASS codec id: AV_CODEC_ID_ASS (which is different from the
legacy AV_CODEC_ID_SSA)
- lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of
"ass") for consistency with the codec id and allows to add a real
ass decoder. This ass decoder receives clean ASS lines (so it starts
with a ReadOrder, is followed by the Layer, etc). We make sure this
is decoded properly in a new ass-line rectangle of the decoded
subtitles (the ssa decoder OTOH is doing a simple straightforward
copy). Using the packet timing instead of data string makes sure the
ass-line now contains the appropriate timing.
- lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed
into "ssa" (instead of "ass") for consistency with the codec id, and
allows to add a real "ass" encoder.
One important thing about this encoder is that it only supports one
ass rectangle: we could have put several dialogue events in the
AVPacket (separated by a \0 for instance) but this would have cause
trouble for the muxer which needs not only the start time, but also
the duration: typically, you have merged events with the same start
time (stored in the AVPacket->pts) but a different duration. At the
moment, only the matroska do the merge with the SSA-line codec.
We will need to make sure all the decoders in the future can't add
more than one rectangle (and only one Dialogue line in it
obviously).
FORMATS
-------
- lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets.
In the case of ASS packets as input, it adds the timing based on the
AVPacket pts and duration, and mux it with "Dialogue:", trailing
CRLF, etc.
- lavf/assdec: unchanged; it currently still only outputs SSA-lines
packets.
- lavf/mkv: the demuxer can now output ASS packets without the need of
any "SSA-lines" reconstruction hack. It will become the default at
next libavformat bump, and the SSA support will be dropped from the
demuxer. The muxer can take ASS packets since it's muxed normally,
and still supports the old SSA packets. All the SSA support and
hacks in Matroska code will be dropped at next lavf bump.
[1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
* qatar/master:
hwaccel: fix use with frame based multithreading
Conflicts:
libavcodec/h263dec.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allows use of AVHWAccel based decoders with frame based multithreading.
The decoders will be forced into an non-concurrent mode by delaying
ff_thread_finish_setup() calls after decoding of the current frame
is finished.
This wastes memory by unnecessarily using multiple threads and thus
copies of the decoder context but allows seamless switching between
hardware accelerated and frame threaded software decoding when the
hardware decoder does not support the stream.
The two types of packets (PCI and DSI) are passed untouched but combined by the new codec ID AV_CODEC_ID_DVD_NAV.
The first 980 bytes in the packet contain the PCI data. The next 1018 are the DSI data.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f099d3d1d5466bd63f4ab36270d169ff9ea613b8':
Add av_log_{ask_for_sample|missing_feature} replacements to libavutil
ismindex: Check the return value of allocations
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit d3edc65dd1, reversing
changes made to 150de78d7c.
Conflicts:
libavcodec/version.h
It seems there are several applications still using it
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0f24a3ca999a702f83af9307f9f47b6fdeb546a5':
lavc: remove disabled FF_API_OLD_ENCODE_VIDEO cruft
lavc: remove disabled FF_API_OLD_ENCODE_AUDIO cruft
lavc: remove disabled FF_API_OLD_DECODE_AUDIO cruft
Conflicts:
libavcodec/flacenc.c
libavcodec/libgsm.c
libavcodec/utils.c
libavcodec/version.h
The compatibility wrapers are left as they likely sre still
in wide use. They will be removed when they break or otherwise
cause work without an volunteer being available.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8df23e938b4022d6e6e9e1180ea6418abae74fda':
lavc: postpone the removal of request_channels API.
AVFrame: deprecate all now unused fields
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ca1fe6c0e60808da45d4dfd8728f45e843b9f9b0':
h263: remove an unused parameter from ff_h263_decode_init_vlc
flac: add channel layout masks for streams with 7 or 8 channels.
flac: don't check the number of channels before setting the channel layout.
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '93af2734ee609133eaeca28329d7f13241dd411f':
lavc: put FF_IDCT_{VP3,H264,CAVS,BINK,EA,WMV2} under FF_API_IDCT.
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows us to get rid of them on the next major bump. All of the
above are functionally irrelevant, and most of them are unused, except
the vp3 one, which is used wrongly in the bfin arch optimizations.
* commit '44e065d56c87d6a9d0effccec5f31517f72924ec':
vdpau: Add context and common helpers for hwaccel support
Conflicts:
Changelog
doc/APIchanges
libavcodec/vdpau.h
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The data does not contain timing or trailing line breaks anymore. In
addition to being less idiotic, it is consistent with other codecs and
thus allows more switches between formats and codecs. It also fixes the
issue of the trailing line returns being simple \n instead of CRLF in
the ASS rectangle dialogue (this is the reason of the FATE update).
Current MicroDVD AVPackets contain timing information and trailing line
breaks. The data is now only composed of the markup data. Doing this
consistently between text subtitles decoders allows to use different
codec for various formats. For instance, MicroDVD markup is sometimes
found in some VPlayer files. Also, generally speaking, the subtitles
text decoders have no use of these timings (and they must not use them
since it would break any user timing adjustment).
Technically, this is a major ABI break. In practice, a mismatching
lavf/lavc will now error out for MicroDVD decoding. Supporting both
formats requires unnecessary complex and fragile code.
FATE needs update because line breaks in the ASS file were "\n" (because
that's what is used in the original file). ASS format expect "\r\n" line
breaks; this commit fixes this issue. Also note that this "\r\n"
trailing need to be moved at some point from the decoders to the ASS
muxer.
Note that the linebreaks text codec option (but not the feature) has
been removed; its main goal was to allow demuxers to configure the text
decoder (and not meant to be used by users), but the AVOption are not a
viable solution. This is solved differently in this commit.
The initial testing of the VFW binary codec was flawed,
likely due to an AviSynth bug.
Re-testing using VirtualDub and various professional editing
applications has revealed it should have been flipped.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This change requires the user to specify min and max value, and makes
possible to prevent the user to set AV_{SAMPLE,PIX}_FMT_NONE if
forbidden.
Add required ifdeffery in case of mixed libraries, when libavutil is
updated but not the other libraries.
This is a followup of 08d0969c14.
Add capability of reading multiple frames instead of only first.
Implement support for different gif frame 'disposal methods'.
Add option that allows to change background color resulting from
conversion of gif with transparency to any other format which
not support it.
Also bump lavc minor version.
Signed-off-by: Vitaliy E Sugrobov <vsugrob@hotmail.com>
Use the i64 field rather than the string value. Using a string to set a
default sample/pixel format is weird, also the new interface is more
consistent with the rest of the API.
This is technically an API break, but hopefully there are no applications
using this feature outside of FFmpeg. In order to save backward
compatibility with mixed libraries in case libavutil is updated but not
the other libraries, some ifdeffery hacks are added.
Note that the version check is only performed when class->version != 0,
since if it is not defined then we assume that no version was defined and
the class is not affected by the change.
We will luckily get rid of the hack at the next major bump.
PIX is an image file format that was used by the BRender 3d engine.
Signed-off-by: Aleksi Nurmi <aleksi.nurmi@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9a07c1332cfe092b57b5758f22b686ca58806c60':
parser: Move Doxygen documentation to the header files
PGS subtitles: Expose forced flag
x86: PMINUB: port to cpuflags
Conflicts:
libavcodec/avcodec.h
libavcodec/pgssubdec.c
libavcodec/version.h
libavcodec/x86/ac3dsp.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '14f031d7ecfabba0ef02776d4516aa3dcb7c40d8':
dv: use AVStream.index instead of abusing AVStream.id
lavfi: add ashowinfo filter
avcodec: Add a RFC 3389 comfort noise codec
lpc: Add a function for calculating reflection coefficients from samples
lpc: Add a function for calculating reflection coefficients from autocorrelation coefficients
lavr: document upper bound on number of output samples.
lavr: add general API usage doxy
indeo3: remove duplicate capabilities line.
fate: ac3: Add dependencies
Conflicts:
Changelog
doc/filters.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
libavfilter/Makefile
libavfilter/af_ashowinfo.c
libavfilter/allfilters.c
libavfilter/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This isn't too useful as a normal codec, but can be used in
voip style applications. The decoder updates the noise
generator parameters when a packet is given to it for decoding,
but if called with an empty packet, it generates more noise
according to the last parameters.
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit introduces a new packet side data type for the subtitle
position information. This is meant to be used by the SRT format where
that information is stored along with the timing, which is not part of
the subrip packets.
This commit introduces a new AVPacket side data type:
AV_PKT_DATA_STRINGS_METADATA. Its main goal is to provide a way to
transmit the metadata from the AVFilterBufferRef up to the AVFrame. This
is at the moment "only" useful for lavfi input from libavdevice:
lavd/lavfi only outputs packets, and the metadata from the buffer ref
kept in its context needs to be transmitted from the packet to the frame
by the decoders. The buffer ref can be destroyed at any time (along with
the metadata), and a duplication of the AVPacket needs to duplicate the
metadata as well, so the choice of using the side data to store them was
selected.
Making sure lavd/lavfi raises the metadata is useful to allow tools like
ffprobe to access the filters metadata (it is at the moment the only
way); ffprobe will now automatically show the AVFrame metadata in any
customizable output format for users. API users will also be able to
access the AVFrame->metadata pointer the same way ffprobe does
(av_frame_get_metadata).
All the changes are done in this single commit to avoid some memory
leaks: for instances, the changes in lavfi/avcodec.c are meant to
duplicate the metadata from the buffer ref into the AVFrame. Unless we
have an internal way of freeing the AVFrame->metadata automatically, it
will leak in most of the user apps. To fix this problem, we introduce
AVCodecContext->metadata and link avctx->metadata to the current
frame->metadata and free it at each decode frame call (and in the codec
closing callback for the last one). But doing this also means to update
the way the tiff decoder already handles the AVFrame->metadata (it's the
only one decoder with frame metadata at the moment), by making sure it
is not trying to free a pointer already freed by the lavc internals.
The lavfi/avcodec.c buffer ref code is based on an old Thomas Kühnel
work, the rest of the code belongs to the commit author.
Signed-off-by: Thomas Kühnel <kuehnelth@googlemail.com>
Signed-off-by: Clément Bœsch <ubitux@gmail.com>
* qatar/master:
yuv4mpeg: return proper error codes.
Give all anonymously typedeffed structs in headers a name
fate: Add parseutils test
parseutils-test: Drop random colors from parsing test
vf_pad/scale: use double precision for aspect ratios.
build: error on variable-length arrays
ppc: swscale: rework yuv2planeX_altivec()
ppc: fmtconvert: kill VLA in float_to_int16_interleave_altivec()
x86: dsputil: kill VLA in gmc_mmx()
libspeexenc: Updated commentary to reflect recent changes
libspeexenc: Add an option for enabling DTX
doc/APIchanges: fill in missing dates and hashes.
lavr: bump major to 1 and declare it stable.
lavr: change the type of the data buffers to uint8_t**.
lavc: deprecate the audio resampling API.
Conflicts:
cmdutils.h
configure
doc/APIchanges
ffplay.c
libavcodec/dwt.h
libavcodec/libspeexenc.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavformat/asf.h
tests/fate/libavutil.mak
tests/ref/fate/parseutils
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
libopus: Remap channels using libopus' internal remapping.
Opus decoder using libopus
avcodec: document the use of AVCodecContext.delay for audio decoding
vc1dec: add flush function for WMV9 and VC-1 decoders
http: Increase buffer sizes to cope with longer URIs
nutenc: const correctness for ff_put_v_trace/put_s_trace function arguments
h264_refs: Fix debug tprintf argument types
golomb: const correctness for get_ue()/get_se() function arguments
get_bits: const correctness for get_bits_trace()/get_xbits_trace() arguments
Conflicts:
Changelog
libavcodec/Makefile
libavcodec/version.h
libavformat/http.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
