* qatar/master:
Remove ffmpeg.
aacenc: Simplify windowing
aacenc: Move saved overlap samples to the beginning of the same buffer as incoming samples.
aacenc: Deinterleave input samples before processing.
aacenc: Store channel count in AACEncContext.
aacenc: Move Q^3/4 calculation to it's own table
aacenc: Request normalized float samples instead of converting s16 samples to float.
aacpsy: Replace an if with FFMAX in LAME windowing.
aacenc: cosmetics, replace 'rd' with 'bits' in codebook_trellis_rate to make it more clear what is being calculated.
aacpsy: cosmetics, change a FIXME to a NOTE about subshort comparisons
aacenc: cosmetics: move init() and end() to the bottom of the file.
aacenc: aac_encode_init() cleanup
XWD encoder and decoder
vc1: don't read the interpfrm and bfraction elements for interlaced frames
mxfdec: fix memleak on mxf_read_close()
westwood: split the AUD and VQA demuxers into separate files.
Conflicts:
.gitignore
Changelog
Makefile
configure
doc/ffmpeg.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/aacenc.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
libavformat/img2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reduces the delay when opening the video with quicktime.
Idea-by: Maksym Veremeyenko <verem@m1stereo.tv>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (25 commits)
riff: fix invalid av_freep() calls on EOF in ff_read_riff_info
pam: Fix a typo that broke writing and reading PAM files.
mxfdec: fix memleak on av_realloc failures
mxfdec: Do not parse slices or DeltaEntryArrays.
mxfdec: hybrid demuxing/seeking solution
mxfdec: Add Avid's essence element key.
mfxdec: Separate mxf_essence_container_uls for audio and video.
mxfdec: Compute packet offsets properly.
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack.
mxfdec: use av_dlog() for 'no corresponding source package found'
mxfdec: Make mxf->partitions sorted by offset.
mxfdec: parse ThisPartition
mxfdec: Speed up metadata and index parsing.
mxfdec: Make sure DataDefinition is consistent between material track and source track.
mxfdec: add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
mxfdec: Add hack that adjusts the n_delta calculation when system items are present.
mxfdec: Parse IndexTableSegments and convert them into AVIndexEntry arrays.
mxfdec: Move FooterPartition to MXFContext and make sure it is never zero.
mxfdec: check return value of avio_seek
mxfdec: skip to end of structural sets
...
Conflicts:
configure
libavcodec/pnm.c
libavformat/mxfdec.c
libavformat/riff.c
libavformat/rtsp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
It is a really bad idea to assign a video codec id
when we have set codec_type to audio and vice versa.
Prevents detection of mp2 in mxf as mpeg2video.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers are not needlessly
parsed. This speeds up parsing large files a lot.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This fixes 0001GL.MXF.V1.mxf_opatom.mxf and 0001GL00.MXF.A1.mxf_opatom.mxf
getting two streams each due to both using the same SourcePackageID.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Based on patch from Tomas Härdin <tomas.hardin@codemill.se>
and work by Georg Lippitsch <georg.lippitsch@gmx.at>
Changed av_calloc to av_mallocz and added overflow checks.
This fixes reading of partition packs. The code stops reading after the
operational pattern and should skip the array of essence container
labels that follow.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Some applications use the j2c extension for jpeg2000 codestream files.
Signed-off-by: Jean First <jeanfirst@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids (for all practical cases) the issue of reusing
the same UDP port as for an earlier connection. If the remote
doesn't know the previous session was closed, he might keep
on sending packets to that port. If we always start off trying
to open the same UDP port, we might get those packets intermixed
with the new ones.
This is occasionally an issue when testing RTSP stuff with
DSS, perhaps also with other servers.
Signed-off-by: Martin Storsjö <martin@martin.st>
This check isn't relevant in the way the code currently works.
Also change a case of if (x == 0) into if (!x).
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec: Use our own SSRC in the SDES field when sending RRs
Finalize changelog for 0.8 Release
Prepare for 0.8 Release
threads: change the default for threads back to 1
threads: update slice_count and slice_offset from user context
aviocat: Remove useless includes
doc/APIChanges: fill in missing dates and hashes
Revert "avserver: fix build after the next bump."
mpegaudiodec: switch error detection check to AV_EF_BUFFER
lavf: rename fer option and document resulting (f_)err_detect options
lavc: rename err_filter option to err_detect and document it
mpegvideo: fix invalid memory access for small video dimensions
movenc: Reorder entries in the MOVIentry struct, for tigheter packing
rtsp: Remove extern declarations for variables that don't exist
aviocat: Flush the output before closing
Conflicts:
Changelog
RELEASE
libavcodec/mpegaudiodec.c
libavcodec/pthread.c
libavformat/options.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The s->ssrc field is the sender's SSRC, we use ssrc + 1 to get
a collision free "unique" SSRC for ourselves in the RR part.
The SDES block in the RTCP packet should describe ourselves,
not the sender.
This was fixed for the RR part in 952139a322, but wasn't
fixed for the SDES part until now.
This could cause some Axis cameras to send RTCP BYE packets
to us due to the SSRC collision.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
Add a tool that uses avio to read and write, doing a plain copy of data
ARM: fix build with FFT enabled and MDCT disabled
lavf: force single-threaded decoding in avformat_find_stream_info
avidec: migrate last of lavf from FF_ER_* to AV_EF_*
avserver: fix build after the next bump.
Conflicts:
libavformat/Makefile
libavformat/avidec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Originally, sizeof(struct MOVIentry) was 48, after the reordering,
it is 40 in my build configuration.
When writing really long mov/mp4 files, this can make a difference
- this saves a bit over 2 MB of memory per hour of video (down to
10.3 MB per hour from 12.3 MB per hour initially) for a video with
75 packets per second - 25 fps + 50 audio packets (which is the
case for AMR audio).
Signed-off-by: Martin Storsjö <martin@martin.st>
The H.264 decoder needs SPS and PPS for initialization during
multi-threaded decoding. When probed single-threaded SPS and PPS are
copied to extradata and are available for proper initialization of
the decoder before the first frame is decoded.
* qatar/master:
rv34: add NEON rv34_idct_add
rv34: 1-pass inter MB reconstruction
add SMJPEG muxer
avformat: split out common SMJPEG code
pictordec: Use bytestream2 functions
avconv: use avcodec_encode_audio2()
pcmenc: use AVCodec.encode2()
avcodec: bump minor version and add APIChanges for the new audio encoding API
avcodec: Add avcodec_encode_audio2() as replacement for avcodec_encode_audio()
avcodec: add a public function, avcodec_fill_audio_frame().
rv34: Intra 16x16 handling
rv34: Inter/intra MB code split
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/pictordec.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/rv34dsp.asm
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Enhances seeking by demuxing until the requested timestamp is reached within
the segment selected by the seek code using the playlist info.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
mov: cosmetics - move a line to a better position and add a comment
Oana Andreea Stratulat submitted a similar patch to trac, but forgot
to notify the ML about it.
Signed-off-by: Jean First <jeanfirst@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: split ADPCM and DPCM test references into separate files.
mov, mxfdec: Employ more meaningful return values.
lavc: Relax API strictness in avcodec_decode_audio3 with a custom get_buffer()
wavpack: fix clipping for 32-bit lossy mode
vb: Use bytestream2 functions
Conflicts:
libavcodec/utils.c
libavcodec/vb.c
libavformat/mxfdec.c
tests/fate/dpcm.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Current code would just return uninitialized data with no way
to detect this condition.
Instead, fill the whole GUID with 0 in that case.
Fixes valgrind uninitialized data errors in fate-seek-lavf_asf.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
With the added benefit that allowing -segment_list_size 0 makes it
possible to keep all segment entries in the list file.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (21 commits)
utils: Check for extradata size overflows.
ARM: rv34: fix asm syntax in dc transform functions
avio: Fix the value of the deprecated URL_FLAG_NONBLOCK
rv34: fix and optimise frame dependency checking
rv34: NEON optimised dc only inverse transform
avprobe: use avio_size() instead of deprecated AVFormatContext.file_size.
ffmenc: remove references to deprecated AVFormatContext.timestamp.
lavf: undeprecate read_seek().
avserver: remove code using deprecated CODEC_CAP_PARSE_ONLY.
lavc: replace some remaining FF_I_TYPE with AV_PICTURE_TYPE_I
lavc: ifdef out parse_only AVOption
nellymoserdec: SAMPLE_FMT -> AV_SAMPLE_FMT
mpegvideo_enc: ifdef out/replace references to deprecated codec flags.
riff: remove references to sonic codec ids
indeo4: add some missing static and const qualifiers
rv34: DC-only inverse transform
avconv: use AVFrame.width/height/format instead of corresponding AVCodecContext fields
lavfi: move version macros to a new installed header version.h
vsrc_buffer: release the buffer on uninit.
rgb2rgb: rgb12tobgr12()
...
Conflicts:
avconv.c
doc/APIchanges
ffprobe.c
libavfilter/Makefile
libavfilter/avfilter.h
libswscale/rgb2rgb.c
libswscale/rgb2rgb.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This isn't used in practice anywhere within libav at the moment,
but change it for consistency until it is removed.
URL_RDONLY/WRONLY were fixed in commit 5b81e29593 (after the
values that actually were used were changed at the major bump,
in commit cbea3ac8), but this flag was unintentionally left unfixed.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
fft: init functions with INIT_XMM/YMM.
pcmenc: set frame_size to 0.
gsm demuxer: use generic seeking instead of a gsm-specific function.
gsm demuxer: return packets with only 1 gsm block at a time.
avcodec: add GSM parser
doc: Replace ffmpeg references in avserver config file by avconv.
doc: Fix names of av_log color environment variables.
Fix a bunch of platform name and other typos.
Add some missing changelog entries and release 0.8_beta2
No longer build libpostproc by default
wtv: fix memleaks during normal operation
threads: add CODEC_CAP_AUTO_THREADS for libvpx and xavs
Conflicts:
Changelog
RELEASE
cmdutils.c
configure
doc/ffserver.conf
doc/platform.texi
ffplay.c
libavcodec/Makefile
libavcodec/version.h
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
rv34: frame-level multi-threading
mpegvideo: claim ownership of referenced pictures
aacsbr: prevent out of bounds memcpy().
ipmovie: fix pts for CODEC_ID_INTERPLAY_DPCM
sierravmd: fix audio pts
bethsoftvideo: Use bytestream2 functions to prevent buffer overreads.
bmpenc: support for PIX_FMT_RGB444
swscale: fix crash in fast_bilinear code when compiled with -mred-zone.
swscale: specify register type.
rv34: use get_bits_left()
avconv: reinitialize the filtergraph on resolution change.
vsrc_buffer: error on changing frame parameters.
avconv: fix -copyinkf.
fate: Update file checksums after the mov muxer change in a78dbada55
movenc: Don't store a nonzero creation time if nothing was set by the caller
bmpdec: support for rgb444 with bitfields compression
rgb2rgb: allow conversion for <15 bpp
doc: fix stray reference to FFmpeg
v4l2: use C99 struct initializer
v4l2: poll the file descriptor
...
Conflicts:
avconv.c
libavcodec/aacsbr.c
libavcodec/bethsoftvideo.c
libavcodec/kmvc.c
libavdevice/v4l2.c
libavfilter/vsrc_buffer.c
libswscale/swscale_unscaled.c
libswscale/x86/input.asm
tests/ref/acodec/alac
tests/ref/acodec/pcm_s16be
tests/ref/acodec/pcm_s24be
tests/ref/acodec/pcm_s32be
tests/ref/acodec/pcm_s8
tests/ref/lavf/mov
tests/ref/vsynth1/dnxhd_1080i
tests/ref/vsynth1/mpeg4
tests/ref/vsynth1/qtrle
tests/ref/vsynth1/svq1
tests/ref/vsynth2/dnxhd_1080i
tests/ref/vsynth2/mpeg4
tests/ref/vsynth2/qtrle
tests/ref/vsynth2/svq1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If the creation time is stored in the file as a zero, the
mov demuxer skips exporting the creation time. Currently,
files muxed without a creation time get demuxed with a
Jan 1st 1970 creation timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes reads of uninitialized data by the parser when running
FATE sample h264-conformance/SL1_SVA_B.264.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master: (29 commits)
cabac: Move code only used within the CABAC test program into the test program.
vp56: Drop unnecessary cabac.h #include.
h264-test: Initialize AVCodecContext.av_class.
build: Skip compiling network.h and rtsp.h if networking is not enabled.
cosmetics: drop some pointless parentheses
Disable annoying warning without changing behavior
faq: Solutions for common problems with sample paths when running FATE.
avcodec: attempt to clarify the CODEC_CAP_DELAY documentation
avcodec: fix avcodec_encode_audio() documentation.
FATE: xmv-demux test; exercise the XMV demuxer without decoding the perceptual codecs inside.
vqf: recognize more metadata chunks
FATE test: BMV demuxer and associated video and audio decoders.
FATE: indeo4 video decoder test.
FATE: update xxan-wc4 test to a sample with more code coverage.
Change the recent h264_mp4toannexb bitstream filter test to output to an elementary stream rather than a program stream.
g722enc: validate AVCodecContext.trellis
g722enc: set frame_size, and also handle an odd number of input samples
g722enc: split encoding into separate functions for trellis vs. no trellis
mpegaudiodec: Use clearer pointer math
tta: Fix returned error code at EOF
...
Conflicts:
libavcodec/h264.c
libavcodec/indeo3.c
libavcodec/interplayvideo.c
libavcodec/ivi_common.c
libavcodec/libxvidff.c
libavcodec/mpegvideo.c
libavcodec/ppc/mpegvideo_altivec.c
libavcodec/tta.c
libavcodec/utils.c
libavfilter/vsrc_buffer.c
libavformat/Makefile
tests/fate/indeo.mak
tests/ref/acodec/g722
Merged-by: Michael Niedermayer <michaelni@gmx.at>
rtsp.h relies on network.h and the latter conditionally defines fallback OS
structures that rely on configure tests, which are only run if networking
is enabled.
This fixes various problems with getting stream info. For example playback of the
file of Ticket88. Multithreaded find_stream_info should be reenabled
once it works correctly
This partly reverts 212fd3a1f1
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
flicvideo: fix invalid reads
vorbis: Avoid some out-of-bounds reads
vqf: add more known extensions
cabac: remove unused function renorm_cabac_decoder
h264: Only use symbols from the SVQ3 decoder under proper conditionals.
add bytestream2_tell() and bytestream2_seek() functions
parsers: initialize MpegEncContext.slice_context_count to 1
spdifenc: use special alignment for DTS-HD length_code
Conflicts:
libavcodec/flicvideo.c
libavcodec/h264.c
libavcodec/mpeg4video_parser.c
libavcodec/vorbis.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The decoders should not only be flushed on EOF or error, but also when
e.g. probe size was reached.
It is best to just always flush by default and only disable it
explicitly when we know that we have everything we need.
Fixes trac ticket #879.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master: (21 commits)
ipmovie: do not read audio packets before the codec is known
truemotion2: check size before GetBitContext initialisation
avio: Only do implicit network initialization for network protocols
avio: Add an URLProtocol flag for indicating that a protocol uses network
adpcm: ADPCM Electronic Arts has always two channels
matroskadec: Fix a bug where a pointer was cached to an array that might later move due to a realloc()
fate: Add missing reference file from 9b4767e4.
mov: Support MOV_CH_LAYOUT_USE_DESCRIPTIONS for labeled descriptions.
4xm: Prevent buffer overreads.
mjpegdec: parse RSTn to prevent skipping other data in mjpeg_decode_scan
vp3: add fate test for non-zero last coefficient
vp3: fix streams with non-zero last coefficient
swscale: remove unused U/V arguments from yuv2rgb_write().
timer: K&R formatting cosmetics
lavf: cosmetics, reformat av_read_frame().
lavf: refactor av_read_frame() to make it easier to understand.
Report an error if pitch_lag is zero in AMR-NB decoder.
Revert "4xm: Prevent buffer overreads."
4xm: Prevent buffer overreads.
4xm: pass the correct remaining buffer size to decode_i2_frame().
...
Conflicts:
libavcodec/4xm.c
libavcodec/mjpegdec.c
libavcodec/truemotion2.c
libavformat/ipmovie.c
libavformat/mov_chan.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Align IEC 61937 length_code for DTS-HD so that
(length_code & 0xf) == 0x8. This is reportedly needed with some
receivers.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The implicit network initialization is set to be removed in the
future, but is kept for compatibility. By not doing the implicit
initialization for non-network protocols, we avoid the warning
about avformat_network_init() not being called for these, where
it really doesn't make much sense.
Signed-off-by: Martin Storsjö <martin@martin.st>
This definition is in two files, since the definitions will move
to the private header at the next bump.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (46 commits)
mtv: Make sure audio_subsegments is not 0
v4l2: use V4L2_FMT_FLAG_EMULATED only if it is defined
avconv: add symbolic names for -vsync parameters
flvdec: Fix compiler warning for uninitialized variables
rtsp: Fix compiler warning for uninitialized variable
ulti: convert to new bytestream API.
swscale: Use standard multiple inclusion guards in ppc/ header files.
Place some START_TIMER invocations in separate blocks.
v4l2: list available formats
v4l2: set the proper codec_tag
v4l2: refactor device_open
v4l2: simplify away io_method
v4l2: cosmetics
v4l2: uniform and format options
v4l2: do not force interlaced mode
avio: exit early in fill_buffer without read_packet
vc1dec: fix invalid memory access for small video dimensions
rv34: fix invalid memory access for small video dimensions
rv34: joint coefficient decoding and dequantization
avplay: Don't call avio_set_interrupt_cb(NULL)
...
Conflicts:
Changelog
avconv.c
doc/APIchanges
doc/indevs.texi
libavcodec/adxenc.c
libavcodec/dnxhdenc.c
libavcodec/h264.c
libavdevice/v4l2.c
libavformat/flvdec.c
libavformat/mtv.c
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Thu Nov 3 22:38:10 2011 +0100
lavf: fix null pointer dereference in rdt
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is no longer needed and causes various problems with RTSP
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
a realloc()
BUG=100492
Review URL: http://codereview.chromium.org/8366004
Fixes: 1 of 2 for CVE-2011-3893
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes an invalid free() with ass in avi. The sample in bug 98 passes
parts of AVPacket.data as buffer for the AVIOContext. Since the packet
is quite large fill_buffer tries to reallocate the buffer before doing
nothing. Fixes bug 98.
* qatar/master:
fate: add dxtory test
adx_parser: rewrite.
adxdec: Validate channel count to fix a division by zero.
adxdec: Do not require extradata.
cmdutils: K&R reformatting cosmetics
alacdec: implement the 2-pass prediction type.
alacenc: implement the 2-pass prediction type.
alacenc: do not generate invalid multi-channel ALAC files
alacdec: fill in missing or guessed info about the extradata format.
utvideo: proper median prediction for interlaced videos
lavu: bump lavu minor for av_popcount64
dca: K&R formatting cosmetics
dct: K&R formatting cosmetics
lavf: flush decoders in avformat_find_stream_info().
win32: detect number of CPUs using affinity
Add av_popcount64
snow: Restore three mistakenly removed casts.
Conflicts:
cmdutils.c
doc/APIchanges
libavcodec/adx_parser.c
libavcodec/adxdec.c
libavcodec/alacenc.c
libavutil/avutil.h
tests/fate/screen.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegenc: use avctx->slices as number of slices
v410enc: fix undefined signed left shift caused by integer promotion
Release notes: mention cleaned up header includes
fix Changelog file
Fix a bunch of typos.
Drop some pointless void* return value casts from av_malloc() invocations.
wavpack: fix typos in previous cosmetic clean-up commit
wavpack: cosmetics: K&R pretty-printing
avconv: remove the 'codec framerate is different from stream' warning
wavpack: determine sample_fmt before requesting a buffer
bmv audio: implement new audio decoding API
mpegaudiodec: skip all channels when skipping granules
mpegenc: simplify muxrate calculation
Conflicts:
Changelog
avconv.c
doc/RELEASE_NOTES
libavcodec/h264.c
libavcodec/mpeg12.c
libavcodec/mpegaudiodec.c
libavcodec/mpegvideo.c
libavformat/mpegenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The fate-h264-bsf-mp4toannexb failures were caused by an integer
overflow of the unneeded multiplication.
Inspired by patch by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
FATE: add tests for dfa
mpegaudiodec: fix seeking.
mpegaudiodec: fix compilation when testing the unchecked bitstream reader
threads: add sysconf based number of CPUs detection
threads: always include necessary headers for number of CPUs detection
threads: default to automatic thread count detection
Changelog: restore version <next> header
cook: K&R formatting cosmetics
Conflicts:
Changelog
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This works around issues arising from inputs that claim to have a
filesize of 0.
Reported-by: buzz_
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: split off DPCM codec FATE tests into their own file
fate: split off PCM codec FATE tests into their own file
libvorbis: K&R reformatting cosmetics
libmp3lame: K&R formatting cosmetics
fate: Add a video test for xxan decoder
mpegvideo_enc: K&R cosmetics (line 1000-2000).
avconv: K&R cosmetics
qt-faststart: Fix up indentation
indeo4: remove two unused variables
doxygen: cleanup style to support older doxy
fate: add more tests for VC-1 decoder
applehttpproto: Apply the same reload interval changes as for the demuxer
applehttp: Use half the target duration as interval if the playlist didn't update
applehttp: Use the last segment duration as reload interval
lagarith: add decode support for arith rgb24 mode
Conflicts:
avconv.c
libavcodec/libmp3lame.c
libavcodec/mpegvideo_enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to draft-pantos-http-live-streaming-07, 6.3.4,
the duration of the last media segment in the playlist
should be used as initial minimum reload delay.
Signed-off-by: Martin Storsjö <martin@martin.st>
With the current default PES packet size, and very small audio bitrates,
audio packet duration gets too long. For players, which wait for a whole
audio packet (or more) it takes a very long time to start playing sound.
For 24kbps audio, one PES packet is about 1 second long. On Motorola STBs,
we observe about 3 second delay before the playback starts with the
default setting.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Do not assume the audio packets being always smaller than
DEFAULT_PES_PAYLOAD_SIZE.
Signed-off-by: Jindřich Makovička <makovick@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
ID3v2.4 allows for zlib compressed tags, but libavformat skips them.
Implement code to inflate compressed tags.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
build: fix standalone compilation of OMA muxer
build: fix standalone compilation of Microsoft XMV demuxer
build: fix standalone compilation of Core Audio Format demuxer
kvmc: fix invalid reads
4xm: Add a check in decode_i_frame to prevent buffer overreads
adpcm: fix IMA SMJPEG decoding
options: set minimum for "threads" to zero
bsd: use number of logical CPUs as automatic thread count
windows: use number of CPUs as automatic thread count
linux: use number of CPUs as automatic thread count
pthreads: reset active_thread_type when slice thread_init returrns early
v410dec: include correct headers
Drop ALT_ prefix from BITSTREAM_READER_LE name.
lavfi: always build vsrc_buffer.
ra144enc: zero the reflection coeffs if the filter is unstable
sws: readd PAL8 to isPacked()
mov: Don't stick the QuickTime field ordering atom in extradata.
truespeech: fix invalid reads in truespeech_apply_twopoint_filter()
Conflicts:
configure
libavcodec/4xm.c
libavcodec/avcodec.h
libavfilter/Makefile
libavfilter/allfilters.c
libavformat/Makefile
libswscale/swscale_internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When no data was available both the buffer thread as well as
the main thread would block in select(), when data becomes
available both should move forward and as data is read in the
buffer thread the main thread would block in select() later
the read data was put in the fifo but the main thread still
would be blocked in select() until either the timeout or
another packet would come in.
This is solved in this commit by using a mutex and a condition
variable
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* tjoppen/fuzz_fixes:
mxfdec: Don't crash in mxf_packet_timestamps() if current_edit_unit overflows
mxfdec: Zero nb_ptses in mxf_compute_ptses_fake_index()
mxfdec: Sanity check PreviousPartition
mxfdec: Never seek back in local sets and KLVs
mxfdec: Move the current_partition check inside mxf_read_header()
mxfdec: Fix infinite loop in mxf_packet_timestamps()
mxfdec: Check url_feof() in mxf_read_local_tags()
mxfdec: Check for NULL component
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The 'fiel' atoms can be found in H.264 tracks clobbering the extradata.
MJPEG supports non field based extradata, and this data should be
preserved when copying.
* qatar/master: (27 commits)
asfdec: add side data to ASFStream packet instead of output packet.
idroqdec: set AVFMTCTX_NOHEADER and create streams as they occur.
nellymoserdec: Indicate that the decoder can handle changed parameters
libavcodec: Apply parameter change side data when decoding audio
flvdec: Add param change side data if the sample rate or channels have changed
libavformat: Add a utility function for adding parameter change side data
libavcodec: Define a side data type for parameter changes
aacdec: Handle new extradata passed as side data
flvdec: Export new AAC/H.264 extradata as side data on the next packet
libavcodec: Define a side data type for new extradata
flacdec: skip all track indices at once instead of looping.
mxf: Add PictureEssenceCoding UL for V210.
mxfdec: consider QuantizationBits between 17 and 24 to be pcm_s24*
mxfenc: Add support for MPEG-2 MP@HL-14 in mxf container.
mxf: H.264/MPEG-4 AVC Intra support
configure: Show whether the safe bitstream reader is enabled
x86: Tighten register constraints for decode_significance*_x86.
Replace Subversion revisions in comments by Git hashes.
h264_cabac: synchronize decode_significance_*_x86 conditionals
w32threads: wait for the waked thread in pthread_cond_signal.
...
Conflicts:
libavcodec/avcodec.h
libavcodec/version.h
libavformat/flvdec.c
libavformat/utils.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes demuxing of file where the first packet is not audio. Such files
are generated by our idroq muxer. It also fixes demuxing of audio only
idroq files.
Compared to just overwriting the old extradata, this has the
advantage of letting the decoder know exactly when the
extradata changed (otherwise it is changed immediately when the
new extradata packet is demuxed, even if there's old queued packets
awaiting to be decoded). This makes it easier for decoders to
actually react to the change, so they won't have to inspect
the extradata for each packet to see if it might have changed.
This works when sequentially playing a file with sample rate
changes, but if seeking past a new extradata packet in the
file, it obviously doesn't work properly. That case doesn't
work in flash player either, so it's probably ok not to handle
it.
Signed-off-by: Martin Storsjö <martin@martin.st>
Support Main Profile at High 1440 Level in MXF container,
using essence coding label from SMPTE RDD 9, table 6.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* tjoppen/mxf_fixes_20111220:
mxfdec: Sanity-check SampleRate
mxfdec: Make sure mxf->nb_index_tables > 0 in mxf_packet_timestamps()
mxfdec: Remove unused variables
mxfdec: Make sure x < index_table->nb_ptses
mxfdec: Ignore the last entry in Avid's index table segments
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Specially crafted files can lead the parsing code to take too long.
We fix a lot of these problems by not allowing local tags to extend past the
end of the set and not allowing other KLVs to be read past the end of
themselves.
* qatar/master:
lavc: always align height by 32 pixel
raw: add 10bit YUV definitions
nut: support 10bit YUV
mpegvideo_enc: separate declarations and statements
oma: make header compile standalone
vp3: Reorder some functions to fix VP3 build with Theora disabled.
build: fix standalone compilation of ADX encoder
build: fix standalone compilation of ADPCM decoders
build: fix standalone compilation of mpc7/mpc8 decoders
4xm: Use bytestream2 functions to prevent overreads
bytestream: add a new set of bytestream functions with overread checking
mpegts: Suppress invalid timebase warnings on DMB streams.
mpegts: Fix typo in handling sections in the PMT.
vc1dec: Use the right pointer type for the tmp pointer
Conflicts:
libavcodec/4xm.c
libavcodec/utils.c
libavcodec/vc1dec.c
libavcodec/vp3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Only the OPAtom demuxing logic is guaranteed to have index tables, meaning OP1a
files that lack an index would cause SIGSEGV.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The last entry is the total size of the essence container.
Previously a TemporalOffset error would be logged, even though segments like
these are expected.
* qatar/master:
h264: clear trailing bits in partially parsed NAL units
vc1: Handle WVC1 interlaced stream
xl: Fix overreads
mpegts: rename payload_index to payload_size
segment: introduce segmented chain muxer
lavu: add AVERROR_BUG error value
avplay: clear pkt_temp when pkt is freed.
qcelpdec: K&R formatting cosmetics
qcelpdec: cosmetics: drop some pointless parentheses
x86: conditionally compile dnxhd encoder optimizations
Revert "h264: skip start code search if the size of the nal unit is known"
swscale: fix formatting and indentation of unscaled conversion routines.
h264: skip start code search if the size of the nal unit is known
cljr: fix buf_size sanity check
cljr: Check if width and height are positive integers
Conflicts:
libavcodec/cljr.c
libavcodec/vc1dec.c
libavformat/Makefile
libavformat/mpegtsenc.c
libavformat/segment.c
libswscale/swscale_unscaled.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
APIchanges: fill in revision for AVFrame.age deprecation
avcodec: deprecate AVFrame.age
4xm: remove unneeded check for remaining unused data.
lavf: force threads to 1 in avformat_find_stream_info()
swscale: fix overflows in vertical scaling at top/bottom edges.
lavf: add OpenMG audio muxer.
omadec: split data that will be used in the muxer to a separate file.
lavf: rename oma.c -> omadec.c
tmv decoder: set correct pix_fmt
Conflicts:
Changelog
doc/APIchanges
libavcodec/mpegvideo.c
libavcodec/version.h
libavformat/oma.c
libavformat/version.h
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* tjoppen/proper_mxf_track_linking:
mxfdec: Don't parse slices or DeltaEntryArrays
mxfdec: Remove dead/useless code
mxfdec: Hybrid demuxing/seeking solution
mxfdec: Add mxf_edit_unit_absolute_offset()
mxfdec: Replace zero IndexDurations with st->duration
mxfdec: Add "fake" index to MXFIndexTable to assist seeking
mxfdec: Add MXFIndexTables
mxfdec: Move mxf_read_packet*() near the bottom of the file
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This should be replaced by a more appropriate error code of course but
we should not leave compilation broken until that is decided.
Found-by: jb
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
get_bits: remove A32 variant
avconv: support stream specifiers in -metadata and -map_metadata
wavpack: Fix 32-bit clipping
wavpack: Clip samples after shifting
h264: don't drop B-frames after next keyframe on POC reset.
get_bits: remove useless pointer casts
configure: refactor lists of tests and components into variables
rv40: NEON optimised weak loop filter
mpegts: replace some magic numbers with the existing define
swscale: add unscaled packed 16 bit per component endianess conversion
Conflicts:
libavcodec/get_bits.h
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we don't
use delta entries or slices, only StreamOffsets.
OPAtom seeking basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
This fixes ticket #746.
This changes mxf_compute_ptses() to be used for MXFIndexTable, and also adds
code for computing the fake index to it.
This also temporarily disables PTS computation. A future patch will restore it.
* qatar/master:
movenc: Rudimentary IODs support.
v410enc: fix output buffer size check
v410enc: include correct headers
fate: add -pix_fmt rgb48le to r210 test
flvenc: Support muxing 16 kHz nellymoser
configure: refactor list of programs into a variable
fate: add r210 decoder test
fate: split off Indeo FATE tests into their own file
fate: split off ATRAC FATE tests into their own file
fate: Add FATE tests for v410 encoder and decoder
ARM: fix external symbol refs in rv40 asm
westwood: Make sure audio header info is present when parsing audio packets
libgsm: Reset the MS mode of GSM in the flush function
libgsm: Set options on the right object
ARM: dca: disable optimised decode_blockcodes() for old gcc
Conflicts:
configure
libavformat/movenc.c
libavformat/movenc.h
tests/fate2.mak
tests/ref/acodec/alac
tests/ref/vsynth1/mpeg4
tests/ref/vsynth2/mpeg4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Audio header information might get scrambled and would not parse,
yet wsqva_read_packet would try to parse audio packets causing
segfaults such as floating point exception.
Fixes bugzilla #141.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (23 commits)
applehttp: Properly clean up if unable to probe a segment
applehttp: Avoid reading uninitialized memory
fate: Replace misleading "aac" in the name of an ADTS test with "adts".
fate: Drop pointless "-an" from pictor test command.
fate: split off image codec FATE tests into their own file
fate: split off WMA codec FATE tests into their own file
fate: split off lossless video and audio FATE tests into their own files
fate: split off qtrle codec FATE tests into their own file
fate: split off Ut Video codec FATE tests into their own file
fate: split off screen codec FATE tests into their own file
fate: split off Real Inc. codec FATE tests into their own file
fate: split off AC-3 codec FATE tests into their own file
mpegvideo: remove abort() in ff_find_unused_picture()
rv40: NEON optimised loop filter strength selection
rv40: rearrange loop filter functions
configure: cosmetics: sort some lists where appropriate
swscale_mmx: drop no longer required parameters from VSCALEX macros
swscale: Mark yuv2planeX_8_mmx as MMX2; it contains MMX2 instructions.
build: conditionally compile x86 H.264 chroma optimizations
v410 encoder and decoder
...
Conflicts:
Changelog
configure
doc/developer.texi
doc/general.texi
libavcodec/arm/asm.S
libavcodec/avcodec.h
libavcodec/v410dec.c
libavcodec/v410enc.c
libavcodec/version.h
libavcodec/x86/Makefile
libavcodec/x86/dsputil_mmx.c
libswscale/x86/swscale_mmx.c
tests/Makefile
tests/fate2.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids a segfault if the probe function wasn't able to
determine the format.
The bug was found by Panagiotis H.M. Issaris.
Signed-off-by: Martin Storsjö <martin@martin.st>
v410 is a packed 10-bit 4:4:4 YCbCr format used in
QuickTime.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
v410 is a packed 10-bit 4:4:4 YCbCr format used in
QuickTime.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
ulti: Fix invalid reads
lavf: dealloc private options in av_write_trailer
yadif: support 10bit YUV
vc1: mark with ER_MB_ERROR bits overconsumption
lavc: introduce ER_MB_END and ER_MB_ERROR
error_resilience: use the ER_ namespace
build: move inclusion of subdir.mak to main subdir loop
rv34: NEON optimised 4x4 dequant
rv34: move 4x4 dequant to RV34DSPContext
aacdec: Use intfloat.h rather than local punning union.
Conflicts:
libavcodec/h264.c
libavcodec/vc1dec.c
libavfilter/vf_yadif.c
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It sets the supplied AVFormatContext pointer to NULL after freeing it,
which is safer and its name is consistent with other lavf functions.
Also deprecate av_close_input_file().
These indexes duplicate every entry and have the total size of the essence
container as the last entry.
This patch also computes the size of the packets when unknown.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
I thought it had to do with file offsets, but's actually the offset inside
the essence container.
In other words, unbreak multiple EditUnitByteCounts.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
x86: cabac: replace explicit memory references with "m" operands
avplay: don't request a stereo downmix
wmapro: use av_float2int()
lavc: avoid invalid memcpy() in avcodec_default_release_buffer()
lavu: replace int/float punning functions
lavfi: install libavfilter/vsrc_buffer.h
Remove extraneous semicolons
sdp: Restore the original mp4 format h264 extradata if converted
rtpenc: Add support for mp4 format h264
rtpenc: Simplify code by introducing a separate end pointer
movenc: Use the actual converted sample for RTP hinting
Fix a bunch of common typos.
Conflicts:
doc/developer.texi
doc/eval.texi
doc/filters.texi
doc/protocols.texi
ffmpeg.c
ffplay.c
libavcodec/mpegvideo.h
libavcodec/x86/cabac.h
libavfilter/Makefile
libavformat/avformat.h
libavformat/cafdec.c
libavformat/flvdec.c
libavformat/flvenc.c
libavformat/gxfenc.c
libavformat/img2.c
libavformat/movenc.c
libavformat/mpegts.c
libavformat/rtpenc_h264.c
libavformat/utils.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The existing functions defined in intfloat_readwrite.[ch] are
both slow and incorrect (infinities are not handled).
This introduces a new header with fast, inline conversion
functions using direct union punning assuming an IEEE-754
system, an assumption already made throughout the code.
The one use of Intel/Motorola extended 80-bit format is
replaced by simpler code sufficient under the present
constraints (positive normal values).
The old functions are marked deprecated and retained for
compatibility.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (21 commits)
Warn about avserver being broken.
avconv: drop code for special handling of avserver streams.
rawdec: don't set codec timebase.
lavf doxy: add muxing stuff to lavf_encoding group
lavf doxy: add demuxing stuff to lavf_decoding group
lavf doxy: expand/reword metadata API doxy.
lavf doxy: add installed headers to groups.
lavf doxy: add avio groups into the lavf_io group.
lavf doxy: rename lavf I/O group to lavf_io.
lavf doxy: add metadata docs to the main lavf group
ttadec: check channel count as read from extradata.
Add CLJR encoding and decoding regression tests
cljr: remove unused code
flacdec: Support for tracks in cuesheet metadata block
ptx: fix inverted check for sufficient data
flac muxer: fix writing of file header and STREAMINFO header from extradata
ptx: emit a warning on insufficient picture data
utvideo: add fate tests covering all codec variants
doc: update to refer to avconv
doc: remove some stale entries from the faq
...
Conflicts:
Changelog
avconv.c
doc/avconv.texi
doc/faq.texi
doc/ffplay.texi
doc/ffprobe.texi
doc/ffserver.texi
libavcodec/avcodec.h
libavcodec/cljr.c
libavformat/avformat.h
libavformat/riff.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If the sdp is generated before the rtp muxer is initialized
(e.g. as when called from the rtsp muxer), this has to be done,
otherwise the rtp muxer doesn't know that the input really is
in mp4 format.
Signed-off-by: Martin Storsjö <martin@martin.st>
If an annex b bitstream is muxed into mov, the actual written
sample is reformatted to mp4 syntax before writing.
Currently, the RTP hints that copy data from the normal video
track, where the payload data might be offset compared to the
original sample that the RTP hinting used (when 3 byte
annex b startcodes have been converted into 4 byte mp4 format
startcodes).
Signed-off-by: Martin Storsjö <martin@martin.st>
It had become dead code when code was added to avoid
exporting audio and video codec id as metadata.
Untested due to lack of sample.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
isom: sort and pretty-print codec_movaudio_tags[]
isom: remove pointless comments in codec_movaudio_tags[]
isom: remove commented-out tag for vorbis
movenc: write 'chan' tag for AC-3 in MOV
mov: add support for reading and writing the 'chan' tag
audioconvert: add some additional channel and channel layout macros
audioconvert: change 7.1 "wide" layout to use side surround channels
movenc: simplify handling of pcm vs. adpcm vs. other compressed codecs
doc: update documentation to use avconv
doc: update demuxers section
doc: extend external library coverage
doc: split platform specific information
doc: port the git-howto to texinfo
doc: provide fallback css and customize @float
doc: document fate in a texinfo
doxy: change hue value to match our green
Conflicts:
doc/fate.txt
doc/ffserver.texi
doc/general.texi
doc/muxers.texi
doc/protocols.texi
doc/t2h.init
libavformat/isom.c
libavformat/mov.c
libavutil/avutil.h
tests/ref/acodec/pcm_s16be
tests/ref/acodec/pcm_s24be
tests/ref/acodec/pcm_s32be
tests/ref/acodec/pcm_s8
tests/ref/lavf/mov
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This implements reading the tag in the demuxer and adds support for writing it
in the muxer. Some example channel layout tables for muxing are included for
ac3, aac, and alac, but they are not utilized yet.
Use Sound Sample Description Version 2 for all MOV files.
Updated FATE references accordingly.
Note that ADPCM is treated as compressed audio in version 2.
* qatar/master:
cljr: K&R cosmetics
cljr: return a more sensible value when encountering invalid headers
cljr: drop unnecessary emms_c() calls without MMX code
cljr: remove useless casts
cljr: group encode/decode parts under single ifdefs
cljr: remove stray semicolon
cljr: add missing return statement in decode_end()
doc: add pulseaudio to the input list
avconv: remove unsubstantiated comment
shorten: avoid abort() on unknown audio types
cljr: add encoder
build: merge lists of HTML documentation targets
tests/examples: Mark some variables only used within their files as static.
tests/tools/examples: Replace direct exit() calls by return.
x86 cpuid: set vendor union members separately
cljr: release picture at end of decoding
rv40: NEON optimised rv40 qpel motion compensation
Conflicts:
doc/examples/muxing.c
libavcodec/cljr.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* tjoppen/opatom_demuxing_and_seeking:
mxfdec: Index table driven demuxing and seeking
mxfdec: Compute packet offsets properly
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack
mxfdec: Parse more values in PartitionPack
mxfdec: Parse TemporalOffsets
mxfdec: av_dlog():ify 'no corresponding source package found'
mxfdec: Compute essence container offsets and lengths into mxf->partitions
mxfdec: Make mxf->partitions sorted by offset
mxfdec: Parse ThisPartition
mxfdec: Speed up metadata and index parsing
mxfdec: Make sure DataDefinition is consistent between material track and source track
mxfdec: Add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These values include KAGSize, HeaderByteCount and IndexByteCount.
The length of the pack itself is also stored, and KAGSize is sanity checked.
The FATE sample has KAGSize == 0, which is adjusted to 512.
Other bad KAGSizes are set to 1.
The information is relevant, but under normal circumstances
it raises far too many false alarms.
Signed-off-by: Nicolas George <nicolas.george@normalesup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
drawtext: remove typo
pcm-mpeg: implement new audio decoding api
w32thread: port fixes to pthread_cond_broadcast() from x264.
doc: add editor configuration section with Vim and Emacs settings
dxva2.h: include d3d9.h to define LPDIRECT3DSURFACE9
avformat/utils: Drop unused goto label.
doxygen: Replace '\' by '@' in Doxygen markup tags.
cosmetics: drop some completely pointless parentheses
cljr: simplify CLJRContext
drawtext: introduce rand(min, max)
drawtext: introduce explicit draw/hide variable
rtmp: Use nb_invokes for all invoke commands
Conflicts:
libavcodec/mpegvideo.c
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers aren't needlessly
parsed. This speeds up parsing large files a lot.
704af3e29c broke publishing
of rtmp streams, at least publishing to Wowza servers.
This changes all invoke commands to use nb_invokes.
Signed-off-by: Martin Storsjö <martin@martin.st>
Its checked a few lines below too.
The only difference is that empty atoms with size=0 will now get parsed too.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The computed size doesn't contain the header size because it's already
skipped by incrementing total_size, but then it's skipped again in the
last line. The atom comes out 8 bytes short and the function
mov_read_chan() aborts the whole parsing process. I think the computed
size should be atom.size - total_size + 8.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mov: Don't av_malloc(0).
avconv: only allocate 1 AVFrame per input stream
avconv: fix memleaks due to not freeing the AVFrame for audio
h264-fate: remove -strict 1 except where necessary (mr4/5-tandberg).
misc Doxygen markup improvements
doxygen: eliminate Qt-style doxygen syntax
g722: Add a regression test for muxing/demuxing in wav
g722: Change bits per sample to 4
g722dec: Signal skipping the lower bits via AVOptions instead of bits_per_coded_sample
api-example: update to use avcodec_decode_audio4()
avplay: use avcodec_decode_audio4()
avplay: use a separate buffer for playing silence
avformat: use avcodec_decode_audio4() in avformat_find_stream_info()
avconv: use avcodec_decode_audio4() instead of avcodec_decode_audio3()
mov: Allow empty stts atom.
doc: document preferred Doxygen syntax and make patcheck detect it
Conflicts:
avconv.c
ffplay.c
libavcodec/mlpdec.c
libavcodec/version.h
libavformat/mov.c
tests/codec-regression.sh
tests/fate/h264.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
malloc() is allowed to return NULL when zero is the argument. This
causes us to think malloc has failed and return AVERROR(ENOMEM). In
addition OS X malloc() returns an unfreeable non-NULL pointer for size
zero when alignment is greater than 16.
instead of when the 2nd stream has been found.
This isnt ideal as we will likely still like before miss a data stream.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
aac_latm: reconfigure decoder on audio specific config changes
latmdec: fix audio specific config parsing
Add avcodec_decode_audio4().
avcodec: change number of plane pointers from 4 to 8 at next major bump.
Update developers documentation with coding conventions.
svq1dec: avoid undefined get_bits(0) call
ARM: h264dsp_neon cosmetics
ARM: make some NEON macros reusable
Do not memcpy raw video frames when using null muxer
fate: update asf seektest
vp8: flush buffers on size changes.
doc: improve general documentation for MacOSX
asf: use packet dts as approximation of pts
asf: do not call av_read_frame
rtsp: Initialize the media_type_mask in the rtp guessing demuxer
Cleaned up alacenc.c
Conflicts:
doc/APIchanges
doc/developer.texi
libavcodec/8svx.c
libavcodec/aacdec.c
libavcodec/ac3dec.c
libavcodec/avcodec.h
libavcodec/nellymoserdec.c
libavcodec/tta.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/wmadec.c
libavformat/asfdec.c
tests/ref/seek/lavf_asf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Pass the correct size in bits to mpeg4audio_get_config and add a flag
to disable parsing of the sync extension when the size is not known.
Latm with AudioMuxVersion 0 does not specify the size of the audio
specific config. Data after the audio specific config can be
misinterpreted as sync extension resulting in random and wrong configs.
Commit 035af99 made avconv always call an encoder when using the
null muxer. While useful for 2-pass encodes, it inadvertently
caused an extra memcpy of raw frames when decoding only.
This hack restores the old behaviour when only decoding while
allowing use of the null muxer with encoded streams as well.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The media_type_mask is initialized via AVOptions for the
rtsp and sdp demuxers, but it isn't available as an option
for the rtp guessing demuxer (since it doesn't really make
sense there). Therefore, it must be manually initialized
instead, since a zero value means no media types at all
are accepted.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (25 commits)
rtpenc: Add support for G726 audio
rtpdec: Interpret the different G726 names as bits_per_coded_sample
rtpenc: Change rtp_send_samples to handle sample sizes other than even bytes
rtpenc: Cast a rescaling parameter to int64_t
h264: cap max has_b_frames at MAX_DELAYED_PIC_COUNT - 1.
ARM: fix indentation in ff_dsputil_init_neon()
ARM: NEON put/avg_pixels8/16 cosmetics
ARM: add remaining NEON avg_pixels8/16 functions
ARM: clean up NEON put/avg_pixels macros
fate: split acodec-pcm into individual tests
swscale: #include "libavutil/mathematics.h"
pmpdec: don't use deprecated av_set_pts_info.
rv34: align temporary block of "dct" coefs
Add PlayStation Portable PMP format demuxer
proto: Realign struct initializers
proto: Use .priv_data_size to allocate the private context
mmsh: Properly clean up if the second ffurl_alloc failed
rtmp: Clean up properly if the handshake failed
md5proto: Remove the get_file_handle function
applehttpproto: Use the close function if the open function fails
...
Conflicts:
libavcodec/vble.c
libavformat/mmsh.c
libavformat/pmpdec.c
libavformat/udp.c
tests/ref/acodec/pcm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When skipping over the extended header, take into account
that the size field has already been read. The extended header
also takes up space, so adjust total header length accordingly.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
For the standardized 8 kHz sample rate, this works exactly the same.
For nonstandard sample rates, the different predefined G726
names (G726-16, G726-24, G726-32, G726-40) are interpreted as an
indication of the bits per coded sample, even though their
actual bitrates aren't what the name specifies.
This feels more sane than using free-form names for nonstandard
sample rate/bitrate combinations, e.g like G726-22, G726-33
for 11025 Hz.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids overflow if frame_size is over 2147, since both
frame_size and AV_TIME_BASE are plain integers.
Signed-off-by: Martin Storsjö <martin@martin.st>
Not yet complete, for demuxing AAC the AAC header must be generated
manually.
Possibly the decoder could accept the header as extradata to simplify
this.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This simplifies the open functions by avoiding one function
call that needs error checking, reducing the amount of
extra bulk code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This string will be passed to ff_http_auth_create_response
even if no proxy is used, resulting in reading uninitialized
memory. The other auth string is always initialized by
av_url_split.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec: Templatize the code for different g726 bitrate variants
rv40: move loop filter to rv34dsp context
lavf: make av_set_pts_info private.
rtpdec: Add support for G726 audio
rtpdec: Add an init function that can do custom codec context initialization
avconv: make copy_tb on by default.
matroskadec: don't set codec timebase.
rmdec: don't set codec timebase.
avconv: compute next_pts from input packet duration when possible.
lavf: estimate frame duration from r_frame_rate.
avconv: update InputStream.pts in the streamcopy case.
Conflicts:
avconv.c
libavdevice/alsa-audio-dec.c
libavdevice/bktr.c
libavdevice/fbdev.c
libavdevice/libdc1394.c
libavdevice/oss_audio.c
libavdevice/v4l.c
libavdevice/v4l2.c
libavdevice/vfwcap.c
libavdevice/x11grab.c
libavformat/au.c
libavformat/eacdata.c
libavformat/flvdec.c
libavformat/mpegts.c
libavformat/mxfenc.c
libavformat/rtpdec_g726.c
libavformat/wtv.c
libavformat/xmv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This requires using a separate init function, since there
isn't necessarily any fmtp lines for this codec, so
parse_sdp_a_line won't be called. Incorporating it with the
alloc function wouldn't do either, since it is called before
the full rtpmap line is parsed (where the sample rate is
extracted).
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
adtsenc: Check frame size.
txd: Fix order of operations.
APIchanges: fill in some blanks
timer: fix misspelling of "decicycles"
Eliminate pointless 0/NULL initializers in AVCodec and similar declarations.
indeo3: cosmetics
md5proto: Fix order of operations.
dca: Replace oversized unused get_bits() with skip_bits_long().
Conflicts:
doc/APIchanges
libavformat/mmsh.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vc1: use an enum for Frame Coding Mode
doc: cleanup filter section
indeo3: error out if no motion vector is set.
x86inc: Flag shufps as an floating-point instruction for the AVX emulation code.
mpegaudio: do not use init_static_data() for initializing tables.
musepack: fix signed shift overflow in mpc_read_packet()
mov: Make format string match variable type.
wmavoice: Make format string match variable type.
vc1: select interlaced scan table by FCM element
Generalize RIFF INFO tag support; support reading INFO tag in wav
pthread: track thread existence in a separate variable.
Conflicts:
doc/filters.texi
libavcodec/pthread.c
libavformat/avi.c
libavformat/riff.c
libavformat/riff.h
libavformat/wav.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Using an unsigned variable avoids problems with overflows.
There is further no need for a 64-bit intermediate here.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (42 commits)
swscale: fix signed overflow in yuv2mono_X_c_template
snow: fix integer overflows
svq1enc: remove stale altivec-related hack
snow: fix signed overflow in byte to 32-bit replication
adx: rename ff_adx_decode_header() to avpriv_adx_decode_header()
avformat: add CRI ADX format demuxer
adx: add an ADX parser.
adx: move header decoding to ADX common code
adx: calculate the number of blocks in a packet
adx: define and use 2 new macro constants BLOCK_SIZE and BLOCK_SAMPLES
adx: check for unsupported ADX formats
adx: simplify encoding by using put_sbits()
adx: calculate correct LPC coeffs
adx: use 12-bit coefficients instead of 14-bit to avoid integer overflow
adx: simplify adx_decode() by using get_sbits() to read residual samples
adx: fix the data offset parsing in adx_decode_header()
adx: remove unneeded post-decode channel interleaving
adx: validate header values
adx: cosmetics: general pretty-printing and comment clean-up
adx: remove useless comments
...
Conflicts:
Changelog
libavcodec/cook.c
libavcodec/fraps.c
libavcodec/nuv.c
libavcodec/pthread.c
libavcodec/version.h
libavformat/Makefile
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This simplifies the decoder so it doesn't have to process an in-packet header
or handle arbitrary-sized packets. It also fixes decoding of files with large
headers.
Also reduce verbosity for the unsupported stream message, use
an AVFormatContext for av_log and and print the tag of the
unknown stream.
Improves ticket #672.
* qatar/master:
libavutil: add utility functions to simplify allocation of audio buffers.
libavutil: add planar sample formats and av_sample_fmt_is_planar()
avconv: fix segfault at EOF with delayed pictures
pcmdec: remove unneeded resetting of samples pointer
avconv: remove a now unused parameter from output_packet().
avconv: formatting fixes in output_packet()
avconv: declare some variables in blocks where they are used
avconv: use the same behavior when decoding audio/video/subs
bethsoftvideo: return proper consumed size for palette packets.
cdg: skip packets that don't contain a cdg command.
crcenc: add flags
avconv: use vsync 0 for AVFMT_NOTIMESTAMPS formats.
tiffenc: add a private option for selecting compression algorithm
md5enc: add flags
ARM: remove needless .text/.align directives
Conflicts:
doc/APIchanges
libavcodec/tiffenc.c
libavutil/avutil.h
libavutil/samplefmt.c
libavutil/samplefmt.h
tests/ref/fate/bethsoft-vid
tests/ref/fate/cdgraphics
tests/ref/fate/film-cvid-pcm-stereo-8bit
tests/ref/fate/mpeg2-field-enc
tests/ref/fate/nuv
tests/ref/fate/tiertex-seq
tests/ref/fate/tscc-32bit
tests/ref/fate/vmnc-32bit
Merged-by: Michael Niedermayer <michaelni@gmx.at>
AVFMT_NOTIMESTAMPS for crc, as it ignores the timestamps.
AVFMT_VARIABLE_FPS for framecrc, as it prints dts.
Many FATE changes, because avconv is no longer duplicating frames in
those tests.
Also added -vsync 0 for some tests to prevent avconv from dropping
frames until it can be fixed more properly.
AVFMT_NOTIMESTAMPS for md5, as it ignores the timestamps.
AVFMT_VARIABLE_FPS for framemd5, as it prints dts.
-vsync 0 for the vp8 test is needed because with vsync 2 the timestamp
guessing code gets confused by an altref frame that is never displayed
and drops a frame later.
* qatar/master: (22 commits)
aacdec: Fix PS in ADTS.
avconv: Consistently use PIX_FMT_NONE.
dsputil: use cpuflags in x86 emu_edge_core
dsputil: use movups instead of movdqu in ff_emu_edge_core_sse()
wma: initialize prev_block_len_bits, next_block_len_bits, and block_len_bits.
mov: Remove some redundant and obsolete comments.
Add libavutil/mathematics.h #includes for INFINITY
doxy: structure libavformat groups
doxy: introduce an empty structure in libavcodec
doxy: provide a start page and document libavutil
doxy: cleanup pixfmt.h
regtest: split video encode/decode tests into individual targets
ARM: add explicit .arch and .fpu directives to asm.S
pthread: do not touch has_b_frames
avconv: cleanup the transcoding loop in output_packet().
avconv: split subtitle transcoding out of output_packet().
avconv: split video transcoding out of output_packet().
avconv: split audio transcoding out of output_packet().
avconv: reindent.
avconv: move streamcopy-only code out of decoding loop.
...
Conflicts:
avconv.c
libavcodec/aaccoder.c
libavcodec/pthread.c
libavcodec/version.h
libavutil/audioconvert.h
libavutil/avutil.h
libavutil/mem.h
tests/ref/vsynth1/dv
tests/ref/vsynth1/mpeg2thread
tests/ref/vsynth2/dv
tests/ref/vsynth2/mpeg2thread
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Adding the thread count in frame level multithreading to has_b_frames
as an additional delay causes more problems than it solves.
For example inconsistent behaviour during timestamp calculation in
libavformat.
Thread count and frame level multithreading are both set by the user.
If the additional delay caused by frame level multithreading needs
to be considered in the calling code it has all information to take
it into account.
Should it become necessary to calculate a maximum delay inside
libavcodec it should be exported as its own field and not reusing
an existing field.
Based on a patch by Michael Niedermayer.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Some sample IFF ACBM files can be found here:
http://aminet.net/package/dev/basic/ABdemos
Thanks to Peter Ross for his help with this patch.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* shariman/wmall: (24 commits)
Clean-up
dump_int_buffer() to dump samples from a buffer
Implement revert_cdlms()
Doxy for reset_codec()
Store transient state and position of transient area
Implement use_high_update_speed() and use_normal_update_speed()
Initialize num_logged_tiles and remove unnecessary codes
Log index for each line of output
Log tile size
Output decoded residues
Replace placeholders with actual calls to clear_codec_buffers() and reset_codec()
Implement lms_update()
Implement lms_predict()
Implement reset_codec()
Add missing syntax elements to WmallDecodeCtx
Add .recent syntax element to cdlms struct
Implement clear_codec_buffers()
Add buffers to context necessary for reverting cdmls and mclms filter
Use avpriv_copy_bits() instead of ff_copy_bits()
Cosmetics
...
Conflicts:
libavcodec/wmalosslessdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
configure: add check for w32threads to enable it automatically
rtmp: do not hardcode invoke numbers
cinepack: return non-generic errors
fate-lavf-ts: use -mpegts_transport_stream_id option.
Add an APIchanges entry and a minor bump for avio changes.
avio: Mark the old interrupt callback mechanism as deprecated
avplay: Set the new interrupt callback
avconv: Set new interrupt callbacks for all AVFormatContexts, use avio_open2() everywhere
cinepak: remove redundant coordinate checks
cinepak: check strip_size
cinepak, simplify, use AV_RB24()
cinepak: simplify, use FFMIN()
cinepak: Fix division by zero, ask for sample if encoded_buf_size is 0
applehttp: Fix seeking in streams not starting at DTS=0
http: Don't use the normal http proxy mechanism for https
tls: Handle connection via a http proxy
http: Reorder two code blocks
http: Add a new protocol for opening connections via http proxies
http: Split out the non-chunked buffer reading part from http_read
segafilm: add support for raw videos
...
Conflicts:
avconv.c
configure
doc/APIchanges
libavcodec/cinepak.c
libavformat/applehttp.c
libavformat/version.h
tests/lavf-regression.sh
tests/ref/lavf/ts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Note: FCPublish/FCUnpublish are adobe server specific and not described
in the rtmp specification. Some servers might not cope with them at
all.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The Apple HTTP Live Streaming demuxer's implementation of
seeking searches for the MPEG TS segment which contains the
requested timestamp. In its current implementation it assumes
that the first segment will start from 0.
But, MPEG TS streams do not necessarily start with timestamp
(near) 0, causing seeking to fail for those streams.
This also occurs when using live streaming of HTTP Live Streams.
In this case sliding playlists may be used, which means that in
that case only the last x encoded segments are stored, the earlier
segments get deleted from disk and removed from the playlist.
Because of this, when starting playback of a stream in the middle
of such a broadcast, the initial segment fetched after parsing
the m3u8 playlist will not start from timestamp (near) 0, causing
(the admittedly limited live) seeking to fail.
This patch changes this demuxers seeking implementation to use
the initial DTS as an offset for searching the segments containing
the requested timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
The tls protocol handles connections via proxies internally.
With TLS/SSL, the peer verification requires that the client
speaks directly with the server, since the proxy doesn't have
the remote server's private key.
Signed-off-by: Martin Storsjö <martin@martin.st>
This opens a plain TCP connection through the proxy via the
CONNECT HTTP method. Normally, this is allowed for connections
on port 443, but can in general be used to allow connections
to any port (depending on proxy configuration), and could thus
be used to tunnel any TCP connection via a HTTP proxy.
Signed-off-by: Martin Storsjö <martin@martin.st>
RTCP timestamps are only necessary to synchronize time between
multiple streams. For a single stream, the RTP packet timestamp
provides more reliable timing. As a result, single-stream RTP
sessions should now have accurate and monotonic PTS.
Signed-off-by: Martin Storsjö <martin@martin.st>
Our ac3 code chain can handle it fine.
More ideal would be to write a demuxer that actually extracts what can be from the additional
headers and uses it for whatever it can be used for.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
TLSv1 is compatible with SSLv3, so this doesn't change much
in terms of compatibility. By explicitly using TLSv1, OpenSSL
sends the server name indication (SNI) header, which we
already set using SSL_set_tlsext_host_name (earlier, this
didn't have any effect).
SNI allows servers to serve SSL content for different host
names with separate certificates on one single port (vhosts).
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
mpegaudiodec: Don't use a nonexistent log context for av_dlog
avformat: Accept the ISO8601 separate format as input, too
avformat: Interpret times in ff_iso8601_to_unix_time as UTC
avutil: Add av_timegm as a public function
cinepak: Add another special case so that it can handle the following file:
lagarith: add some RGBA decoding support
lagarith: Add correct line prediction for RGB
Conflicts:
doc/APIchanges
libavcodec/cinepak.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the function accept the format of creation_time
as output by demuxers (e.g. the mov demuxer), making the
creation timestamp stay intact if transcoding.
Signed-off-by: Martin Storsjö <martin@martin.st>
This function is used in muxers for parsing the 'creation_time'
metadata key, for converting it to a time value.
This makes it match the behaviour of the exported 'creation_time'
metadata from demuxers, where it is in UTC, too.
Signed-off-by: Martin Storsjö <martin@martin.st>
