* commit 'f890677d05bc4e8b494a73373ab4cc19791bf884':
Replace any remaining avpicture function with imgutils
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
avpriv_ac3_parse_header was removed in commit 3dfb643.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This commit introduces a parser for the current bitstream produced by
Daala. It currently bears a large similarity with Theora, another
codec produced by Xiph. While likely to change in the future, its basic
format of packet parsing should remain fairly identical with its current
structure.
Once the bitstream freezes, there are a few probable simplifications
that could be made. Also, the current version (major, minor and micro)
is stuck at zero so it's unusable as a way to warn about possible
incompatibilities. This will change once the bitstream freezes,
however until then this file is strictly targeting the current git
master of the reference encoder, libdaala.
This file was developed independently at the same time by both myself
and Vittorio Giovara, who used libav as a starting point. For fairness,
and to prevent confusion and allegations, his name has been added to the
copyright in the license header as well, and vice versa.
Commit 2b3e9bbfb5 caused problems for a
certain API user:
https://code.google.com/p/chromium/issues/detail?id=537725https://code.google.com/p/chromium/issues/detail?id=542032
The problem seems rather arbitrary, because if there's junk, anything
can happen. In this case, the imperfect junk skipping just caused it to
read different junk, from what I can see.
We can improve the accuracy of junk detection by a lot by checking if 2
consecutive frames use the same configuration. While in theory it might
be completely fine for the 1st frame to have a different format than the
2nd frame, it's exceedingly unlikely, and I can't think of a legitimate
use-case.
This is approximately the same mpg123 does for junk skipping. The
set of compared header bits is the same as the libavcodec mp3 parser
uses for similar purposes.
Fixes ticket #4924.
Found-by: Jaroslav Šnajdr <jsnajdr@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Marton Balint <cus@passwd.hu>
Without EXT-X-MAP support we miss the first bytes of some streams.
These streams worked by luck before byte-ranged segment support was added in
da7759b357
Fixes ticket #4797.
Commit ad701326b4 ("avformat/hls: open playlists immediately when
AVDISCARD_ALL is dropped") inadvertently caused first_packet to never be
cleared, causing select_cur_seq_no() to not use the specific code for
live streams.
In practice this means that when the user selects a different audio
track during live stream (i.e. non-VOD) playback, there may be some
additional delay as the code might select an incorrect segment at first,
and we have to wait for video to catch audio (if too late segment was
selected) or to download more following audio segments (if too early
segment was selected).
Fix that by restoring the zeroing of first_packet.
* commit 'e55376a1fd5abebbb0a082aa20739d58c2260a37':
rtmpproto: Write correct flv packet sizes at the end of packets
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '34ed5c2e4d9b7fe5c9b3aae2da5599fabb95c02e':
avformat: Do not use AVFMT_RAWPICTURE
Removal from ffmpeg.c not merged because some parts of avdevice
still use it
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This fixes access to Grandstream cameras, which return 401 otherwise.
VLC sends Authorization: header with spaces between parameters, and it
is known to work with Grandstream devices and broad range of other HTTP
and RTSP servers, so author considers switching to such behaviour safe.
See RFC 2617 (HTTP Auth).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
In one case it was written as zero, one case left it uninitialized,
missed the 11 bytes for the flv header.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Partially fixes Ticket 4727.
-duration is not a safe expression, since duration can be INT_MIN.
One might ask how it can become INT_MIN.
Although it is true that line 2574 is no longer reached with INT_MIN due
to commit 053e80f6ea (which fixed another
integer overflow issue), mov_update_dts_shift is called on line 3549 as
well, right after a read of untrusted data.
One can do the fix locally there, but that function is already a huge
mess. Changing mov_update_dts_shift is likely better.
This changes duration to INT_MIN + 1 in such cases. This should not make any
practical difference since such streams are anyway fuzzer files.
Tested with FATE.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
It makes possible to put multiple stream specifier into the select
option separated by comma.
eg. select=\'a:0,v\'
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Nicolas George <george@nsup.org>
* commit '00cc10aee380f882507bac994ac469d8358d12e8':
asfdec: do not skip padding if offset is above packet size - padding
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This fixes access to Grandstream cameras, which return 401 to ffmpeg
otherwise.
VLC sends Authorization: header with spaces between parameters, and it
is known to work with Grandstream devices and broad range of other HTTP
and RTSP servers, so author considers switching to such behaviour safe.
Just for record - RFC 2617 (HTTP Auth) does not specify the need in
spaces, so this is not a bug of FFmpeg.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Glibc 2.20 onwards generates a deprecation warning for usage of _BSD_SOURCE and _SVID_SOURCE.
The solution from man feature_test_macros is to define both _DEFAULT_SOURCE and the old macros.
This solution is on the lines of the one in commit af1818276e.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
"language" is not an offical matroska tag.
Track languages are specified with the MATROSKA_ID_TRACKLANGUAGE ebml.
Writing the tag overrides the ebml specified language during playback with
libav and some other players.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This will give incorrect results in some cases due to not parsing segments
separately, so it currently requires -strict experimental.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This error was produced by rtmproto.c, it is possibly such streams
where dumped, this commit is needed to support them
Fixes: z0e.flv
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should fix RTMP input which was broken by cbbd906be6
the 40 + 11 case is untested as it did not occur in the testcase
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The DDTS atom is defined in ETSI TS 102 114, v1.4.1, Annex E.
This is useful for DTS-HD formats, some of which cannot be
decoded by dcadec.c or libdcadec.
Signed-off-by: Shawn Singh <shawnsingh@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '948f3c19a8bd069768ca411212aaf8c1ed96b10d':
lavc: Make AVPacket.duration int64, and deprecate convergence_duration
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Note that convergence_duration had another meaning, one which was in
practice never used. The only real use for it was a 64 bit replacement
for the duration field. It's better just to make duration 64 bits, and
to get rid of it.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
In case of resync, always free the packet, but retry only if the resync
did not get to the end of the file. Otherwise, there is a memory leak when the
last packet in the file is corrupted.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Note that this slightly changes behavior: it sets AVMEDIA_TYPE_UNKNOWN
if the codec type is unknown. This should be ok.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If there is no #EXT-X-BYTERANGE specified, there is no need to seek.
Seeking fails anyway for rtmp, because this protocol does not support
url_seek.
This fixes CNN.m3u from trac ticket 4797 (i.e. Debian bug #798189).
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Broken by commit ba12ba859a. This only
happens with HLS streams which use encryption and require preserving
cookies sent by the server.
Fixes trac issue #4846.
Some .idx files actually contain duplicate subtitle events:
timestamp: 00:07:52:600, filepos: 00004e800
timestamp: 00:07:52:600, filepos: 00004f800
The second will be dropped, because it has same pts, duration, and text
(the text is just a dummy empty string; the real data is retrieved when
actually reading vobsub subtitle packets).
Dropping this is probably not intended/safe, so avoid it.
See trac issue #4872 for a sample. This patch doesn't fix decoding of
the sample, though.
The stream ID is essentially an arbitrary number defined by the .idx
file headers. They have to match the IDs in the .sub stream. The vobsub
demuxer assumed the IDs would just start from 0, increassing by 1 for
each stream. This is not correct. In the sample I had, the IDs were
starting from 1, leading to no subtitles being displayed at all.
Fix this by using the correct stream ID.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
lpd.buf is non-const and discards the const qualifier of zerobuffer.
This fixes -Wdiscarded-qualifiers observed with a variety of compilers, including GCC 5.2.
Note that this does not change the type of zerobuffer, and merely makes the intent explicit.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
lpd.buf is non-const and discards the const qualifier of zerobuffer.
This fixes -Wdiscarded-qualifiers observed with GCC 5.2.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit '3c525b8b4770c1ac5f466a12c5523802bd5d40eb':
rtpdec: Increase the max size of the jitter buffer to 500 packets
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
packets are queued due to packet reordering until the queue reach its
maximal size or max delay is reached.
This commit adds a warning trace when max delay is reached.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit print as AV_LOG_VERBOSE the jitter buffer
size. It might be the default value or the value set by application.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit adds a warning trace when jitter buffer
is full. It helps to understand leading decoding issues.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit adds an error trace when jitter buffer
is full. It helps to understand leading decoding issues.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit print as AV_LOG_INFO the jitter buffer
size. It might be the default value or the value set by application.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Since the actual max length of the jitter buffer is restricted by
max_delay, this shouldn't harm the overall latency (assuming that
max_delay is set properly), while allowing packet reordering with
a larger number of packets (which may be required with high bitrate
video).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'c0a49077ea4ff3a0ad30b9e33f1bb06ba9112aaa':
asfdec: add more checks for size left in asf packet buffer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Allow writing an empty channel mask into the wave format header. Useful
if the input file contains an unknown channel layout.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '41ed749fe987e60b0485fa721ad869590651324d':
ogg: Do not try to use the parser if it is not present
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Not requiring this can end up producing hilariously broken files
together with -c:s copy (e.g. a webvtt file containing binary subtitle data).
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If we try to listen on TCP port and ff_listen() fails on
interrupt callback socket (bind) descriptor overwrites and
does not closed at all.
As a result, we can't rebind to the same port.
Reviewed-by: Stephan Holljes <klaxa1337@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '77cf23668991bfd1fb69339f13e1511b4186b7b3':
asfdec: alloc enough space for storing name in asf_read_metadata_obj
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
They allow reconnecting endless live streams which fail with eof
Reviewed-by: Zhang Rui <bbcallen@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e05f7ed5436207f4a55f1978b223c7f8bc82af42':
file: properly forward errors from file_read() and file_write()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The previous restriction was partially designed to fix certain
(broken) samples from bug 215. There should be no restriction on the
number of keyframes per fragment or trun.
The spec suggests that all frames lacking MOV_FRAG_SAMPLE_FLAG_IS_NON_SYNC
are key frames, but we require the flag MOV_FRAG_SAMPLE_FLAG_DEPENDS_YES
to be unset as well. This works for (possibly broken) media that never
sets the NON_SYNC flag and should also be correct for any spec-compliant
file.
For files that never set either of the flags, all samples are marked
as keyframes.
Signed-off-by: Martin Storsjö <martin@martin.st>
Allows avformat_query_codec to be used to check for valid image2 encoders.
Reuses the existing ff_guess_image2_codec ID table.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When AVFMT_FLAG_FAST_SEEK is specified, make MP3 seek operation as
fast as possible.
When no "-usetoc" is specified, the default operation is using TOC
if available; otherwise, uses linear interpolation. This is useful
when seeking a large MP3 file with no TOC available. One example is
Podcast, many MP3 files are large, but no CBR/VBR tags. Most of
them are actually CBR. Even in VBR cases, this option sacrifices the
accuracy of playback time in exchange for responsiveness.
* commit '4e649debcf7f71d35c6b38cdb7ee715eba95d64a':
Postpone API-incompatible changes until the next bump
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '01bcc2d5c23fa757d163530abb396fd02f1be7c8':
lavc: Drop deprecated destruct_packet related functions
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The assignment had incorrectly placed parentheses which resulted in ret
always being > 0.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes CID1322328
Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
PES header size is 6 bytes (00 00 01 bf XX XX), not 0.
BluRay text subtitles use private stream 2.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Instead of returning EINVAL, which can cause a stream to fail to load, this
allows the tag to be passed through to the flv demuxer, where it's summarily
ignored.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
And update the preference for the newer codecs now that the libraries
seem stable and widespread enough.
Bug-Id: 695
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This demuxer was broken on a large number of platforms due to usage of wrong
format specifier in sscanf. This patch fixes the problem, and also adds some
debug logging to reduce future debugging pain.
Otherwise it is impossible to make '-movflags +rtphint' bitexact after
FF_API_LAVF_BITEXACT has been disabled.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Move field to internal part of AVStream and struct to internal.h
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Comment was previously slightly incorrect.
Also, it was placed in the wrong location.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixing small leaks that can occur when mkv_write_tracks fails in mkv_write_header
(e.g., if video track has unknown codec). Also changing mkv_write_seekhead to take
the MatroskaMuxContext to avoid having dangling pointers.
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '317cfaa5e09755ed0b34af512ec687963a67bdbf':
asfdec: prevent the memory leak in the asf_read_metada_obj
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '26ac22e5e7394346e9d59f800e7d4e91f4518d33':
movenc: Add a new flag for writing global sidx indexes for dash
Conflicts:
libavformat/movenc.c
libavformat/movenc.h
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
also do not return the error code but just break reading
metadata object in the case of the aspect ratio reading failure
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Stream timebase should be set using avpriv_set_pts_info, otherwise
avctx->pkt_timebase is not correct.
This should fix ticket #4766.
Patch is only compile tested.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Stephen Hutchinson <qyot27@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The double meaning of the faststart flag (moving a moov atom
to the start of files, making them streamable, for non-fragmented
files, vs inserting a global sidx index at the start of files
for fragmented files) is confusing - see 40ed1cbf1 for
explanation of its origins.
Since the second meaning of the flag hasn't been part of any
libav release yet, just rename it to get rid of the confusion
without any extra deprecation (which wouldn't get rid of the
potential confusion, of users adding -movflags faststart
even for fragmented files, where it isn't needed for making
them "streamable").
This gets back the old behaviour, where -movflags faststart
doesn't have any effect for fragmented files.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '5f200bbf98efe50f63d0515b115d2ba8dae297bc':
movenc: Place the sidx index after the initial moov/mdat pair
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8e34089e265a6b01e1e3301e8864439d26793753':
movenc: Check that frag_info entries exist in mov_write_sidx_tag
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
For fragmented files with non-empty moov, with a fragment index
(sidx), place the index after the initial moov/mdat pair.
Previously, for this pathological case, the index was written
at the start of the file.
Signed-off-by: Martin Storsjö <martin@martin.st>
The same field is also used for writing the sidx index header,
for fragmented files, when the faststart flag is used.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes crashes with pathological cases when trying to write
a sidx index (via the -movflags faststart option, in combination
with fragmenting options), when no fragments actually have been
written. (This is possible if the empty_moov flag isn't used,
so that all actual packet data is written in the moov/mdat pair,
and no moof/mdat pairs have been written.)
In these pathological cases, no sidx should be written at all.
Signed-off-by: Martin Storsjö <martin@martin.st>
Compute individual stream durations in matroska muxer.
Write them as string tags in the same format as mkvmerge tool does.
Signed-off-by: Sasi Inguva <isasi@google.com>
The length of BOOL values is 16 bits in the Metadata Object but
32 bits in the Extended Content Description Object.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
According to S377M, segmented frame layout is identical to separate
field layout except that the two fields are taken from a single scan
of the incoming image, ie: they are coincident in time. Thus the
resulting frame is progressive.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'fdbc544d29176ba69d67dd879df4696f0a19052e':
asfdec: prevent the memory leak while reading metadata
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'cd4d9df22738e6f147521ccb72c7930db6050914':
asfdec: free AVDictionaries properly when closing the demuxer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
