This matches the matroska defintion of stereo_mode, with
no metadata written if no info exist in sei
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '23e85be58fc64b2e804e68b0034a08a6d257e523':
h264: add a parameter to the CHROMA444 macro.
h264: add a parameter to the CHROMA422 macro.
Conflicts:
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cavlc.c
libavcodec/h264_loopfilter.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6d2b6f21eb45ffbda1103c772060303648714832':
h264: add a parameter to the CABAC macro.
h264: add a parameter to the FIELD_OR_MBAFF_PICTURE macro.
Conflicts:
libavcodec/h264.c
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7fa00653a550c0d24b3951c0f9fed6350ecf5ce4':
h264: add a parameter to the FIELD_PICTURE macro.
h264: add a parameter to the FRAME_MBAFF macro.
Conflicts:
libavcodec/h264.c
libavcodec/h264_loopfilter.c
libavcodec/h264_refs.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'da6be8fcec16a94d8084bda8bb8a0a411a96bcf7':
h264: add a parameter to the MB_FIELD macro.
h264: add a parameter to the MB_MBAFF macro.
Conflicts:
libavcodec/h264.c
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bcd0a7137e4aca0f6f598593b90ca8f338444c51':
configure: Add missing h264chroma dependencies to vp5, vp6
Add missing error_resilience includes to files that use ER
Conflicts:
configure
libavcodec/mpeg12.c
libavcodec/mpeg4videodec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '040c565e51985477a8fa5e42d2ddfb26ebde6608':
doc: developer: Allow tabs in the vim configuration for Automake files
Remove pointless av_cold attributes in header files
Conflicts:
libavcodec/h264.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The init functions marked as av_cold have to be executed in any case,
so there is no gain from trying to mark paths leading to such functions
as unlikely.
Instead, only extend edges on-demand when the motion vector actually
crosses the visible decoded area using ff_emulated_edge_mc(). This
changes decoding time for cathedral from 8.722sec to 8.706sec, i.e.
0.2% faster overall. More generally (VP8 uses this also), low-motion
content gets significant speed improvements, whereas high-motion content
tends to decode in approximately the same time.
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead, keep them in the bitstream buffer until we read them verbatim,
this saves a memcpy() and a subsequent clearing of the target buffer.
decode_cabac+decode_mb for a sample file (CAPM3_Sony_D.jsv) goes from
6121.4 to 6095.5 cycles, i.e. 26 cycles faster.
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead, only extend edges on-demand when the motion vector actually
crosses the visible decoded area using ff_emulated_edge_mc(). This
changes decoding time for cathedral from 8.722sec to 8.706sec, i.e.
0.2% faster overall. More generally (VP8 uses this also), low-motion
content gets significant speed improvements, whereas high-motion content
tends to decode in approximately the same time.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, keep them in the bitstream buffer until we read them verbatim,
this saves a memcpy() and a subsequent clearing of the target buffer.
decode_cabac+decode_mb for a sample file (CAPM3_Sony_D.jsv) goes from
6121.4 to 6095.5 cycles, i.e. 26 cycles faster.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Most of the changes are just trivial are just trivial replacements of
fields from MpegEncContext with equivalent fields in H264Context.
Everything in h264* other than h264.c are those trivial changes.
The nontrivial parts are:
1) extracting a simplified version of the frame management code from
mpegvideo.c. We don't need last/next_picture anymore, since h264 uses
its own more complex system already and those were set only to appease
the mpegvideo parts.
2) some tables that need to be allocated/freed in appropriate places.
3) hwaccels -- mostly trivial replacements.
for dxva, the draw_horiz_band() call is moved from
ff_dxva2_common_end_frame() to per-codec end_frame() callbacks,
because it's now different for h264 and MpegEncContext-based
decoders.
4) svq3 -- it does not use h264 complex reference system, so I just
added some very simplistic frame management instead and dropped the
use of ff_h264_frame_start(). Because of this I also had to move some
initialization code to svq3.
Additional fixes for chroma format and bit depth changes by
Janne Grunau <janne-libav@jannau.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The sh4 optimizations are removed, because the code is
100% identical to the C code, so it is unlikely to
provide any real practical benefit.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
ref_list is constructed from other fields per slice when needed, so do
not copy it for both frame and slice threading.
default_ref_list is constructed per frame and still needs to be copied
to per-slice contexts for slice threading, but a copy is not needed for
frame threading.
* commit 'd8c772de53d29afb1bada88afa859fce8489c668':
nutdec: Always return a value from nut_read_timestamp()
configure: Make warnings from -Wreturn-type fatal errors
x86: ABS2: port to cpuflags
vdpau: Remove av_unused attribute from function declaration
h264: fix ff_generate_sliding_window_mmcos() prototype.
Conflicts:
configure
libavformat/nutdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Clobbering these tables will temporarily clobber the template used
as a basis for other threads to start decoding from. If the other
decoding thread updates from the template right at that moment,
subsequent threads will get invalid (or, usually, none at all) mmco
tables. This leads to invalid reference lists and subsequent decode
failures.
Therefore, instead, decode the mmco tables only for the first slice in
a field or frame. For other slices, decode the bits and ensure they
are identical to the mmco tables in the first slice, but don't ever
clobber the context state. This prevents other threads from using a
clobbered/invalid template as starting point for decoding, and thus
fixes decoding in these cases.
This fixes occasional (~1%) failures of h264-conformance-mr1_bt_a with
frame-multithreading enabled.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Clobbering these tables will temporarily clobber the template used
as a basis for other threads to start decoding from. If the other
decoding thread updates from the template right at that moment,
subsequent threads will get invalid (or, usually, none at all) mmco
tables. This leads to invalid reference lists and subsequent decode
failures.
Therefore, instead, decode the mmco tables only for the first slice in
a field or frame. For other slices, decode the bits and ensure they
are identical to the mmco tables in the first slice, but don't ever
clobber the context state. This prevents other threads from using a
clobbered/invalid template as starting point for decoding, and thus
fixes decoding in these cases.
This fixes occasional (~1%) failures of h264-conformance-mr1_bt_a with
frame-multithreading enabled.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'ed2d7d5868a4a5d914f1e5488d63ea696a3b2937':
ff_h264_direct_ref_list_init: fix B slice check.
h264: increase dist_scale_factor for up to 32 references
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '61c6eef5456f2bc8b1dc49a0a759c975551cea29':
h264: prevent decoding of slice NALs in extradata
doxy: Clarify what avpriv_set_pts_info does
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is not posible to call get_buffer during frame-mt codec
initialization. Libavformat might pass huge amounts of data as
extradata after parsing broken files. The 'extradata' for the fuzzed
sample sample_varPAR_s5374_r001-02.avi is 2.8M large and contains
multiple slices.
* commit '6a27ae28f9bde981e85c82cf5bf42c5f43fb6f13':
mpegvideo: treat delayed pictures as used
Conflicts:
libavcodec/h264.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '072be3e8969f24113d599444be4d6a0ed04a6602':
h264: set parameters from SPS whenever it changes
asyncts: cosmetics: reindent
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This requires to move the avcodec_default_free_buffers() call to
ff_MPV_common_end() since otherwise delayed pictures would get freed
during a size change.
This fixes out of global array reads.
The alternative solutions of checking the index or modifying the VLC tables
to prevent the index going outside are each about 1-2 cpu cyclces slower
per coded 4x4 block.
The alternative of padding the global tables directly is more ugly and
moving them to the context should benefit cache locality.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (25 commits)
rv40dsp x86: MMX/MMX2/3DNow/SSE2/SSSE3 implementations of MC
ape: Use unsigned integer maths
arm: dsputil: fix overreads in put/avg_pixels functions
h264: K&R formatting cosmetics for header files (part II/II)
h264: K&R formatting cosmetics for header files (part I/II)
rtmp: Implement check bandwidth notification.
rtmp: Support 'rtmp_swfurl', an option which specifies the URL of the SWF player.
rtmp: Support 'rtmp_flashver', an option which overrides the version of the Flash plugin.
rtmp: Support 'rtmp_tcurl', an option which overrides the URL of the target stream.
cmdutils: Add fallback case to switch in check_stream_specifier().
sctp: be consistent with socket option level
configure: Add _XOPEN_SOURCE=600 to Solaris preprocessor flags.
vcr1enc: drop pointless empty encode_init() wrapper function
vcr1: drop pointless write-only AVCodecContext member from VCR1Context
vcr1: group encoder code together to save #ifdefs
vcr1: cosmetics: K&R prettyprinting, typos, parentheses, dead code, comments
mov: make one comment slightly more specific
lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with SSE4 and AVX
lavfi: move audio-related functions to a separate file.
lavfi: remove some audio-related function from public API.
...
Conflicts:
cmdutils.c
libavcodec/h264.h
libavcodec/h264_mvpred.h
libavcodec/vcr1.c
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/defaults.c
libavfilter/internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: Factorize declaration of mb_sizes array.
vsrc_buffer: when no frame is available, return an error instead of segfaulting.
configure: add dl to frei0r extralibs.
dsputil x86: use SSE float instruction instead of SSE2 integer equivalent
dsputil x86: remove deprecated parameter from scalarproduct_int16 prototype
vp8dsp x86: perform rounding shift with a single instruction
fate: add BMP tests.
swscale: handle complete dimensions for monoblack/white.
aacenc: Mark deinterleave_input_samples argument as const.
vf_unsharp: Mark readonly variable as const.
h264: fix 4:2:2 PCM-macroblocks decoding
Conflicts:
configure
libavcodec/h264.h
libavcodec/x86/dsputil_mmx.c
libavfilter/vf_unsharp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: drop ff_h264_ prefix from static function ff_h264_decode_rbsp_trailing()
h264: Make ff_h264_decode_end() static, it is not used externally.
output-example: K&R formatting cosmetics, comment spelling fixes
avf: make the example output the proper message
avf: fix audio writing in the output-example
mov: don't overwrite existing indexes.
lzw: fix potential integer overflow.
truemotion: forbid invalid VLC bitsizes and token values.
truemotion2: handle out-of-frame motion vectors through edge extension.
configure: Check for a different SDL function
Conflicts:
configure
doc/examples/muxing.c
libavcodec/truemotion2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (38 commits)
v210enc: remove redundant check for pix_fmt
wavpack: allow user to disable CRC checking
v210enc: Use Bytestream2 functions
cafdec: Check return value of avio_seek and avoid modifying state if it fails
yop: Check return value of avio_seek and avoid modifying state if it fails
tta: Check return value of avio_seek and avoid modifying state if it fails
tmv: Check return value of avio_seek and avoid modifying state if it fails
r3d: Check return value of avio_seek and avoid modifying state if it fails
nsvdec: Check return value of avio_seek and avoid modifying state if it fails
mpc8: Check return value of avio_seek and avoid modifying state if it fails
jvdec: Check return value of avio_seek and avoid modifying state if it fails
filmstripdec: Check return value of avio_seek and avoid modifying state if it fails
ffmdec: Check return value of avio_seek and avoid modifying state if it fails
dv: Check return value of avio_seek and avoid modifying state if it fails
bink: Check return value of avio_seek and avoid modifying state if it fails
Check AVCodec.pix_fmts in avcodec_open2()
svq3: Prevent illegal reads while parsing extradata.
remove ParseContext1
vc1: use ff_parse_close
mpegvideo parser: move specific fields into private context
...
Conflicts:
libavcodec/4xm.c
libavcodec/aacdec.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/mpeg4video_parser.c
libavcodec/svq3.c
libavcodec/v210enc.c
libavformat/cafdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Conversion of the luma intra prediction mode to one of the constrained
("alzheimer") ones can happen by crafting special bitstreams, causing
a crash because we'll call a NULL function pointer for 16x16 block intra
prediction, since constrained intra prediction functions are only
implemented for chroma (8x8 blocks).
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Start code emulation prevention is only required in Annex B bytestream
packed NAL units. For other coding formats the size is already known.
Looking for a start code prefix can result in false positives like in
http://streams.videolan.org/streams/mp4/Mr_MrsSmith-h264_aac.mp4
which has a false positive in the SPS.
* qatar/master:
ulti: Fix invalid reads
lavf: dealloc private options in av_write_trailer
yadif: support 10bit YUV
vc1: mark with ER_MB_ERROR bits overconsumption
lavc: introduce ER_MB_END and ER_MB_ERROR
error_resilience: use the ER_ namespace
build: move inclusion of subdir.mak to main subdir loop
rv34: NEON optimised 4x4 dequant
rv34: move 4x4 dequant to RV34DSPContext
aacdec: Use intfloat.h rather than local punning union.
Conflicts:
libavcodec/h264.c
libavcodec/vc1dec.c
libavfilter/vf_yadif.c
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: fix frame reordering code.
fate: Add a test for the VBLE decoder
doc: break some long lines in developer.texi
drawtext: make x and y parametric
drawtext: manage memory allocation better
drawtext: refactor draw_text
doc: remove space between variable and post increment in example code
Conflicts:
doc/developer.texi
doc/filters.texi
libavcodec/h264.c
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
http: Remove the custom function for disabling chunked posts
rtsp: Disable chunked http post through AVOptions
movdec: Set frame_size for AMR
h264_weight: remove duplication functions.
swscale: align vertical filtersize by 2 on x86.
libavfilter: reindent.
matroskadec: empty blocks are in fact valid.
avfilter: don't abort() on zero-size allocations.
h264: improve calculation of codec delay.
movenc: Set a correct packet size for AMR-NB mode 15, "no data"
avformat: Add functions for doing global network initialization
avformat: Add the https protocol
avformat: Add the tls protocol, using OpenSSL or gnutls
avformat: Initialize gnutls in ff_tls_init()
w32threads: Wrap the mutex functions in inline functions returning int
configure: Allow linking to the gnutls library
avformat: Add ff_tls_init()/deinit() that initialize OpenSSL
configure: Allow linking to openssl
avcodec: Allow locking and unlocking an avformat specific mutex
avformat: Split out functions from network.h to a new file, network.c
Conflicts:
Changelog
configure
doc/APIchanges
libavcodec/internal.h
libavcodec/version.h
libavfilter/formats.c
libavformat/matroskadec.c
libavformat/mov.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes the following conformance suite samples:
HCBP1_HHI_A.264, HCBP2_HHI_A.264, HCMP1_HHI_A.264 (main)
HCHP1_HHI_B.264, HCHP2_HHI_A.264, HCHP3_HHI_A.264 (frext)
recovery points that have non-zero recovery_frame_cnt resulted in
flagging incomplete frames as keyframes. This delays setting the
keyframe flag till the frame has been fully constructed.
Fixes Ticket472
This may (or may not) cause problems with files that have no keyframes.
Plese open a bugreport or mail me if you have a file for which this fails.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
APIchanges: fill in missing hashes and dates.
Add an APIChanges entry and bump minor versions for recent changes.
ffmpeg: print the low bitrate warning after the codec is openend.
doxygen: Move function documentation into the macro generating the function.
doxygen: Make sure parameter names match between .c and .h files.
h264: move fill_decode_neighbors()/fill_decode_caches() to h264_mvpred.h
H.264: Add more x86 assembly for 10-bit H.264 predict functions
lavf: fix invalid reads in avformat_find_stream_info()
cmdutils: replace opt_default with opt_default2() and remove set_context_opts
ffmpeg: use new avcodec_open2 and avformat_find_stream_info API.
ffplay: use new avcodec_open2 and avformat_find_stream_info API.
cmdutils: store all codec options in one dict instead of video/audio/sub
ffmpeg: check experimental flag after codec is opened.
ffmpeg: do not set GLOBAL_HEADER flag in the options context
Conflicts:
cmdutils.c
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/version.h
libavformat/version.h
libswscale/swscale_unscaled.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
doc: Improve references to external URLs.
h264: move decode_mb_skip() from h264.h to h.264_mvpred.h
ffplay: skip return value of avcodec_decode_video2 / avcodec_decode_subtitle2
dnxhdenc: Replace a forward declaration by the proper #include.
h264: move h264_mvpred.h include.
pix_fmt: Fix number of bits per component in yuv444p9be
lavf: deprecate AVFormatContext.timestamp
ffmpeg: merge input_files_ts_scale into InputStream.
ffmpeg: don't abuse a global for passing sample format from input to output
ffmpeg: don't abuse a global for passing channel layout from input to output
ffmpeg: factor common code from new_a/v/s/d_stream to new_output_stream()
matroskaenc: make SSA default subtitle codec.
oggdec: prevent heap corruption.
Conflicts:
doc/developer.texi
doc/faq.texi
doc/general.texi
ffmpeg.c
ffplay.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes the following compile error with darwin/gcc-4.2.1:
In file included from libavcodec/error_resilience.c:33:
libavcodec/h264.h: In function ‘decode_mb_skip’:
libavcodec/h264.h:773: error: ‘always_inline’ function could not be inlined in call to ‘pred_pskip_motion’: the function body must appear before caller
libavcodec/h264.h:1334: error: called from here
FF_COMMON_FRAME holds the contents of the AVFrame structure and is also copied
to struct Picture. Replace by an embedded AVFrame structure in struct Picture.
* qatar/master: (22 commits)
H.264: fix filter_mb_fast with 4:4:4 + 8x8dct
alsa: limit buffer_size to 32768 frames.
alsa: fallback to buffer_size/4 for period_size.
doc: replace @pxref by @ref where appropriate
mpeg1video: don't abort if thread_count is too high.
segafilm: add support for videos with cri adx adpcm
gxf: Fix 25 fps DV material in GXF being misdetected as 50 fps
libxvid: Add const qualifier to silence compiler warning.
H.264: improve qp_thresh check
H.264: use fill_rectangle in CABAC decoding
H.264: Remove redundant hl_motion_16/8 code
H.264: merge fill_rectangle into P-SKIP MV prediction, to match B-SKIP
H.264: faster P-SKIP decoding
H.264: av_always_inline some more functions
H.264: Add x86 assembly for 10-bit H.264 predict functions
swscale: rename uv_off/uv_off2 to uv_off_px/byte.
swscale: implement error dithering in planarCopyWrapper.
swscale: error dithering for 16/9/10-bit to 8-bit.
swscale: fix overflow in 16-bit vertical scaling.
swscale: fix crash in 8-bpc bilinear output without alpha.
...
Conflicts:
doc/developer.texi
libavdevice/alsa-audio.h
libavformat/gxf.c
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/swscale_unscaled.c
libswscale/x86/swscale_template.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_crop
tests/ref/lavfi/pixfmts_hflip
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (40 commits)
H.264: template left MB handling
H.264: faster fill_decode_caches
H.264: faster write_back_*
H.264: faster fill_filter_caches
H.264: make filter_mb_fast support the case of unavailable top mb
Do not include log.h in avutil.h
Do not include pixfmt.h in avutil.h
Do not include rational.h in avutil.h
Do not include mathematics.h in avutil.h
Do not include intfloat_readwrite.h in avutil.h
Remove return statements following infinite loops without break
RTSP: Doxygen comment cleanup
doxygen: Escape '\' in Doxygen documentation.
md5: cosmetics
md5: use AV_WL32 to write result
md5: add fate test
md5: include correct headers
md5: fix test program
doxygen: Drop array size declarations from Doxygen parameter names.
doxygen: Fix parameter names to match the function prototypes.
...
Conflicts:
libavcodec/x86/dsputil_mmx.c
libavformat/flvenc.c
libavformat/oggenc.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ARM: ac3: update ff_ac3_extract_exponents_neon per 8b7b2d6
ARM: NEON optimised vector_clip_int32()
swscale: disable full_chroma_int when converting to non-24/32bpp RGB.
suggest to use av_get_bytes_per_sample() in av_get_bits_per_sample_format() doxy
ffmpeg: use av_get_bytes_per_sample() in place of av_get_bits_per_sample_fmt()
put_bits: remove ALT_BITSTREAM_WRITER
put_bits: always use intreadwrite.h macros
libavformat: Add an example how to use the metadata API
doxygen: Prefer member groups over grouping into modules
doxygen: be more permissive when searching for API examples
avformat: doxify the Metadata API
lavf: restore old behavior for custom AVIOContex with an AVFMT_NOFILE format.
lavf: use the correct pointer in av_open_input_stream().
avidec: infer absolute vs relative index from first packet
Conflicts:
libavformat/Makefile
libavformat/avidec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Before this, almost all module groups have been used for grouping functions
and fields in structures semantically. This causes them to not appear
properly in the file documentation and needlessly clutters up the "Modules"
index.
Additionally, this commit streamlines some spelling and appearances.
* qatar/master:
swscale: remove misplaced comment.
ffmpeg: fix streaming to ffserver.
swscale: split out RGB48 output functions from yuv2packed[12X]_c().
build: move vpath directives to main Makefile
swscale: fix JPEG-range YUV scaling artifacts.
build: move ALLFFLIBS to a more logical place
ARM: factor some repetitive code into macros
Fix SVQ3 after adding 4:4:4 H.264 support
H.264: fix CODEC_FLAG_GRAY
4:4:4 H.264 decoding support
ac3enc: fix allocation of floating point samples.
Conflicts:
ffmpeg.c
libavcodec/dsputil_template.c
libavcodec/h264.c
libavcodec/mpegvideo.c
libavcodec/snow.c
libswscale/swscale.c
libswscale/swscale_internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit a50f0bea25.
This has been implemented differently in qatar and its better they
maintain it for me instead of me having to spend an average 5sec more
per merge
Conflicts:
libavcodec/h264.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (30 commits)
AVOptions: make default_val a union, as proposed in AVOption2.
arm/h264pred: add missing argument type.
h264dsp_mmx: place bracket outside #if/#endif block.
lavf/utils: fix ff_interleave_compare_dts corner case.
fate: add 10-bit H264 tests.
h264: do not print "too many references" warning for intra-only.
Enable decoding of high bit depth h264.
Adds 8-, 9- and 10-bit versions of some of the functions used by the h264 decoder.
Add support for higher QP values in h264.
Add the notion of pixel size in h264 related functions.
Make the h264 loop filter bit depth aware.
Template dsputil_template.c with respect to pixel size, etc.
Template h264idct_template.c with respect to pixel size, etc.
Preparatory patch for high bit depth h264 decoding support.
Move some functions in dsputil.c into a new file dsputil_template.c.
Move the functions in h264idct into a new file h264idct_template.c.
Move the functions in h264pred.c into a new file h264pred_template.c.
Preparatory patch for high bit depth h264 decoding support.
Add pixel formats for 9- and 10-bit yuv420p.
Choose h264 chroma dc dequant function dynamically.
...
Conflicts:
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/alpha/dsputil_alpha.c
libavcodec/arm/dsputil_init_arm.c
libavcodec/arm/dsputil_init_armv6.c
libavcodec/arm/dsputil_init_neon.c
libavcodec/arm/dsputil_iwmmxt.c
libavcodec/arm/h264pred_init_arm.c
libavcodec/bfin/dsputil_bfin.c
libavcodec/dsputil.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/h264_loopfilter.c
libavcodec/h264_ps.c
libavcodec/h264_refs.c
libavcodec/h264dsp.c
libavcodec/h264idct.c
libavcodec/h264pred.c
libavcodec/mlib/dsputil_mlib.c
libavcodec/options.c
libavcodec/ppc/dsputil_altivec.c
libavcodec/ppc/dsputil_ppc.c
libavcodec/ppc/h264_altivec.c
libavcodec/ps2/dsputil_mmi.c
libavcodec/sh4/dsputil_align.c
libavcodec/sh4/dsputil_sh4.c
libavcodec/sparc/dsputil_vis.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/dsputil_mmx.c
libavformat/options.c
libavformat/utils.c
libavutil/pixfmt.h
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/swscale_template.c
tests/ref/seek/lavf_avi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
No speed improvement, but necessary for some future stuff.
Also opens up the possibility of asm chroma dc idct/dequant.
Originally committed as revision 26349 to svn://svn.ffmpeg.org/ffmpeg/trunk
Useful so that we don't have to run the hierarchical DC iDCT if there aren't
any coefficients. Opens up some future opportunities for optimization as well.
Originally committed as revision 26337 to svn://svn.ffmpeg.org/ffmpeg/trunk
About 2.5x the speed.
NOTE: the way that the asm code handles large qmuls is a bit suboptimal.
If x264-style dequant was used (separate shift and qmul values), it might
be possible to get some extra speed.
Originally committed as revision 26336 to svn://svn.ffmpeg.org/ffmpeg/trunk
libavcodec/h264.h:1260: warning: ‘decode_mb_skip’ defined but not used
patch by Eli Friedman, eli.friedman gmail com
Originally committed as revision 24069 to svn://svn.ffmpeg.org/ffmpeg/trunk
Passing an explicit filename to this command is only necessary if the
documentation in the @file block refers to a file different from the
one the block resides in.
Originally committed as revision 22921 to svn://svn.ffmpeg.org/ffmpeg/trunk
The function is only used within that file, so it makes sense to place
it there. This fixes many warnings of the type:
h264.h:1170: warning: ‘fill_filter_caches’ defined but not used
Originally committed as revision 22876 to svn://svn.ffmpeg.org/ffmpeg/trunk
This moves the H264-specific functions from DSPContext to the new
H264DSPContext. The code is made conditional on CONFIG_H264DSP
which is set by the codecs requiring it.
The qpel and chroma MC functions are not moved as these are used by
non-h264 code.
Originally committed as revision 22565 to svn://svn.ffmpeg.org/ffmpeg/trunk
These macros are redundant. All uses are replaced with the generic
DECLARE_ALIGNED macro instead.
Originally committed as revision 22233 to svn://svn.ffmpeg.org/ffmpeg/trunk
this seems 1 cpu cycle slower even though we practically just remove code.
Speed loss seems caused by the merge of if(left_type), iam commiting this
anyway as i cant imagine this to be anything but compiler messup.
Originally committed as revision 22073 to svn://svn.ffmpeg.org/ffmpeg/trunk
about 5 cpu cycles slower in the local code but should be overall faster
due to reduced cache use. (my sample though has too few intra4x4 blocks
for this to be meassureable easily either way)
Originally committed as revision 22052 to svn://svn.ffmpeg.org/ffmpeg/trunk
The code read/write code itself was 1 cycle faster, overall its
likely more due to cache effects
Originally committed as revision 22048 to svn://svn.ffmpeg.org/ffmpeg/trunk
This eliminates all aliasing violation warnings in h264 code.
No measurable speed difference with gcc-4.4.3 on i7.
Originally committed as revision 21881 to svn://svn.ffmpeg.org/ffmpeg/trunk
the row code. This function would only be needed on a MB basis for MBAFF+FMO
Originally committed as revision 21860 to svn://svn.ffmpeg.org/ffmpeg/trunk
Log:
h264: Fix pointer warnings by removing redundant [0]
Fixes:
h264.h:1222:38: warning: initialization from incompatible pointer type
h264.h:1299:38: warning: initialization from incompatible pointer type
h264.h:1314:42: warning: initialization from incompatible pointer type
Reason: breaks h264 decoding & fate
Originally committed as revision 21818 to svn://svn.ffmpeg.org/ffmpeg/trunk
Fixes:
h264.h:1222:38: warning: initialization from incompatible pointer type
h264.h:1299:38: warning: initialization from incompatible pointer type
h264.h:1314:42: warning: initialization from incompatible pointer type
Originally committed as revision 21814 to svn://svn.ffmpeg.org/ffmpeg/trunk
Fixes:
h264.h: In function 'fill_filter_caches':
h264.h:1216:73: warning: integer overflow in expression
h264.h:1307:81: warning: integer overflow in expression
Originally committed as revision 21813 to svn://svn.ffmpeg.org/ffmpeg/trunk
loop filter. This removes one obstacle of getting ff_h264_filter_mb_fast()
bitexact. code is maybe 0.1% faster
Originally committed as revision 21280 to svn://svn.ffmpeg.org/ffmpeg/trunk
Run loop filter per row instead of per MB, this also should make it
much easier to switch to per frame filtering and also doing so in a
seperate thread in the future if some volunteer wants to try.
Overall decoding speedup of 1.7% (single thread on pentium dual / cathedral sample)
This change also allows some optimizations to be tried that would not have
been possible before.
Originally committed as revision 21270 to svn://svn.ffmpeg.org/ffmpeg/trunk
No benchmark because its just replacing variables with litteral constants
(so no risk for slowdown outside gcc silliness) and i need sleep.
Originally committed as revision 21237 to svn://svn.ffmpeg.org/ffmpeg/trunk
This could have caused the linking failure of pred_pskip_motion() missing if
a compiler included never used static functions.
Originally committed as revision 21221 to svn://svn.ffmpeg.org/ffmpeg/trunk
Seems to speed the code up a little...
The placement of many generic functions between h264.c and h264.h is still open
Currently they are a little randomly placed between them.
Originally committed as revision 21178 to svn://svn.ffmpeg.org/ffmpeg/trunk
called once per MB in worst case and doesnt seem to benefit from static inline.
Actually the code might be a hair faster now (0.1% according to my benchmark but
this could be random noise)
Originally committed as revision 21173 to svn://svn.ffmpeg.org/ffmpeg/trunk
