Rename ffplay to avplay.

.gitignore

@@ -12,7 +12,7 @@ doc/*.html
 doc/*.pod
 doxy
 ffmpeg
-ffplay
+avplay
 ffprobe
 ffserver
 libavcodec/*_tablegen

Changelog

@@ -5,6 +5,7 @@ releases are sorted from youngest to oldest.
 version <next>:
 - BWF muxer
 - Flash Screen Video 2 decoder
+- ffplay renamed to avplay
 
 
 version 0.7:

Makefile

@@ -53,7 +53,7 @@ COMPILE_S = $(call COMPILE,AS)
 %.c %.h: TAG = GEN
 
 PROGS-$(CONFIG_FFMPEG)   += ffmpeg
-PROGS-$(CONFIG_FFPLAY)   += ffplay
+PROGS-$(CONFIG_AVPLAY)   += avplay
 PROGS-$(CONFIG_FFPROBE)  += ffprobe
 PROGS-$(CONFIG_FFSERVER) += ffserver
 
@@ -64,7 +64,7 @@ HOSTPROGS  := $(TESTTOOLS:%=tests/%)
 TOOLS       = qt-faststart trasher
 TOOLS-$(CONFIG_ZLIB) += cws2fws
 
-BASENAMES   = ffmpeg ffplay ffprobe ffserver
+BASENAMES   = ffmpeg avplay ffprobe ffserver
 ALLPROGS    = $(BASENAMES:%=%$(EXESUF))
 ALLMANPAGES = $(BASENAMES:%=%.1)
 
@@ -116,8 +116,8 @@ endef
 
 $(foreach D,$(FFLIBS),$(eval $(call DOSUBDIR,lib$(D))))
 
-ffplay.o: CFLAGS += $(SDL_CFLAGS)
-ffplay$(EXESUF): FF_EXTRALIBS += $(SDL_LIBS)
+avplay.o: CFLAGS += $(SDL_CFLAGS)
+avplay$(EXESUF): FF_EXTRALIBS += $(SDL_LIBS)
 ffserver$(EXESUF): LDFLAGS += $(FFSERVERLDFLAGS)
 
 $(PROGS): %$(EXESUF): %.o cmdutils.o $(FF_DEP_LIBS)

avplay.c

@@ -1,5 +1,5 @@
 /*
- * ffplay : Simple Media Player based on the Libav libraries
+ * avplay : Simple Media Player based on the Libav libraries
  * Copyright (c) 2003 Fabrice Bellard
  *
  * This file is part of Libav.
@@ -55,7 +55,7 @@
 #include <unistd.h>
 #include <assert.h>
 
-const char program_name[] = "ffplay";
+const char program_name[] = "avplay";
 const int program_birth_year = 2003;
 
 #define MAX_QUEUE_SIZE (15 * 1024 * 1024)
@@ -1678,7 +1678,7 @@ static int input_config_props(AVFilterLink *link)
 
 static AVFilter input_filter =
 {
-    .name      = "ffplay_input",
+    .name      = "avplay_input",
 
     .priv_size = sizeof(FilterPriv),
 
@@ -2357,7 +2357,7 @@ static int decode_thread(void *arg)
     av_freep(&opts);
 
     if(ic->pb)
-        ic->pb->eof_reached= 0; //FIXME hack, ffplay maybe should not use url_feof() to test for the end
+        ic->pb->eof_reached= 0; //FIXME hack, avplay maybe should not use url_feof() to test for the end
 
     if(seek_by_bytes<0)
         seek_by_bytes= !!(ic->iformat->flags & AVFMT_TS_DISCONT);
@@ -2954,7 +2954,7 @@ static const OptionDef options[] = {
 static void show_usage(void)
 {
     printf("Simple media player\n");
-    printf("usage: ffplay [options] input_file\n");
+    printf("usage: %s [options] input_file\n", program_name);
     printf("\n");
 }
 
@@ -3030,7 +3030,7 @@ int main(int argc, char **argv)
     if (!input_filename) {
         show_usage();
         fprintf(stderr, "An input file must be specified\n");
-        fprintf(stderr, "Use -h to get full help or, even better, run 'man ffplay'\n");
+        fprintf(stderr, "Use -h to get full help or, even better, run 'man %s'\n", program_name);
         exit(1);
     }
 

configure

@@ -81,7 +81,7 @@ Configuration options:
                            and binaries will be unredistributable [no]
   --disable-doc            do not build documentation
   --disable-ffmpeg         disable ffmpeg build
-  --disable-ffplay         disable ffplay build
+  --disable-avplay         disable avplay build
   --disable-ffprobe        disable ffprobe build
   --disable-ffserver       disable ffserver build
   --disable-avdevice       disable libavdevice build
@@ -913,7 +913,7 @@ CONFIG_LIST="
     dxva2
     fastdiv
     ffmpeg
-    ffplay
+    avplay
     ffprobe
     ffserver
     fft
@@ -1489,8 +1489,8 @@ postproc_deps="gpl"
 # programs
 ffmpeg_deps="avcodec avformat swscale"
 ffmpeg_select="buffer_filter"
-ffplay_deps="avcodec avformat swscale sdl"
-ffplay_select="rdft"
+avplay_deps="avcodec avformat swscale sdl"
+avplay_select="rdft"
 ffprobe_deps="avcodec avformat"
 ffserver_deps="avformat ffm_muxer fork rtp_protocol rtsp_demuxer"
 ffserver_extralibs='$ldl'
@@ -1635,7 +1635,7 @@ enable debug
 enable doc
 enable fastdiv
 enable ffmpeg
-enable ffplay
+enable avplay
 enable ffprobe
 enable ffserver
 enable network

doc/avplay.texi

@@ -1,8 +1,8 @@
 \input texinfo @c -*- texinfo -*-
 
-@settitle ffplay Documentation
+@settitle avplay Documentation
 @titlepage
-@center @titlefont{ffplay Documentation}
+@center @titlefont{avplay Documentation}
 @end titlepage
 
 @top
@@ -13,14 +13,14 @@
 
 @example
 @c man begin SYNOPSIS
-ffplay [options] @file{input_file}
+avplay [options] @file{input_file}
 @c man end
 @end example
 
 @chapter Description
 @c man begin DESCRIPTION
 
-FFplay is a very simple and portable media player using the Libav
+AVplay is a very simple and portable media player using the Libav
 libraries and the SDL library. It is mostly used as a testbed for the
 various Libav APIs.
 @c man end
@@ -166,8 +166,8 @@ Seek to percentage in file corresponding to fraction of width.
 
 @ignore
 
-@setfilename ffplay
-@settitle FFplay media player
+@setfilename avplay
+@settitle AVplay media player
 
 @c man begin SEEALSO
 ffmpeg(1), ffprobe(1), ffserver(1) and the Libav HTML documentation

doc/demuxers.texi

@@ -70,7 +70,7 @@ Apple HTTP Live Streaming demuxer.
 
 This demuxer presents all AVStreams from all variant streams.
 The id field is set to the bitrate variant index number. By setting
-the discard flags on AVStreams (by pressing 'a' or 'v' in ffplay),
+the discard flags on AVStreams (by pressing 'a' or 'v' in avplay),
 the caller can decide which variant streams to actually receive.
 The total bitrate of the variant that the stream belongs to is
 available in a metadata key named "variant_bitrate".

doc/developer.texi

@@ -17,7 +17,7 @@
 decoding). Look at @file{libavcodec/apiexample.c} to see how to use it.
 
 @item libavformat is the library containing the file format handling (mux and
-demux code for several formats). Look at @file{ffplay.c} to use it in a
+demux code for several formats). Look at @file{avplay.c} to use it in a
 player. See @file{libavformat/output-example.c} to use it to generate
 audio or video streams.
 

doc/ffmpeg.texi

@@ -1079,7 +1079,7 @@ file to which you want to add them.
 @settitle ffmpeg video converter
 
 @c man begin SEEALSO
-ffplay(1), ffprobe(1), ffserver(1) and the Libav HTML documentation
+avplay(1), ffprobe(1), ffserver(1) and the Libav HTML documentation
 @c man end
 
 @c man begin AUTHORS

doc/ffprobe.texi

@@ -122,7 +122,7 @@ with name "STREAM".
 @settitle ffprobe media prober
 
 @c man begin SEEALSO
-ffmpeg(1), ffplay(1), ffserver(1) and the Libav HTML documentation
+ffmpeg(1), avplay(1), ffserver(1) and the Libav HTML documentation
 @c man end
 
 @c man begin AUTHORS

doc/ffserver.texi

@@ -265,7 +265,7 @@ rather than as a daemon.
 
 @c man begin SEEALSO
 
-ffmpeg(1), ffplay(1), ffprobe(1), the @file{ffmpeg/doc/ffserver.conf}
+ffmpeg(1), avplay(1), ffprobe(1), the @file{ffmpeg/doc/ffserver.conf}
 example and the Libav HTML documentation
 @c man end
 

doc/general.texi

@@ -837,7 +837,7 @@ speed up is close to non-existent for normal one-off builds and is only
 noticeable when running make for a second time (for example in
 @code{make install}).
 
-@item In order to compile FFplay, you must have the MinGW development library
+@item In order to compile AVplay, you must have the MinGW development library
 of @uref{http://www.libsdl.org/, SDL}.
 Edit the @file{bin/sdl-config} script so that it points to the correct prefix
 where SDL was installed. Verify that @file{sdl-config} can be launched from

doc/indevs.texi

@@ -199,10 +199,10 @@ tools.
 @example
 # Grab and show the input of a video4linux device, frame rate is set
 # to the default of 25/1.
-ffplay -s 320x240 -f video4linux /dev/video0
+avplay -s 320x240 -f video4linux /dev/video0
 
 # Grab and show the input of a video4linux2 device, autoadjust size.
-ffplay -f video4linux2 /dev/video0
+avplay -f video4linux2 /dev/video0
 
 # Grab and record the input of a video4linux2 device, autoadjust size,
 # frame rate value defaults to 0/0 so it is read from the video4linux2

doc/libavfilter.texi

@@ -24,7 +24,7 @@ some directory of your choice by:
 @end example
 
 And then read the README file in the top directory to learn how to
-integrate it into ffmpeg and ffplay.
+integrate it into ffmpeg and avplay.
 
 But note that there may still be serious bugs in the code and its API
 and ABI should not be considered stable yet!
@@ -56,7 +56,7 @@ result will be that in output the top half of the video is mirrored
 onto the bottom half.
 
 Video filters are loaded using the @var{-vf} option passed to
-ffmpeg or to ffplay. Filters in the same linear chain are separated by
+ffmpeg or to avplay. Filters in the same linear chain are separated by
 commas. In our example, @var{split, fifo, overlay} are in one linear
 chain, and @var{fifo, crop, vflip} are in another. The points where
 the linear chains join are labeled by names enclosed in square

doc/protocols.texi

@@ -52,10 +52,10 @@ resource to be concatenated, each one possibly specifying a distinct
 protocol.
 
 For example to read a sequence of files @file{split1.mpeg},
-@file{split2.mpeg}, @file{split3.mpeg} with @file{ffplay} use the
+@file{split2.mpeg}, @file{split3.mpeg} with @file{avplay} use the
 command:
 @example
-ffplay concat:split1.mpeg\|split2.mpeg\|split3.mpeg
+avplay concat:split1.mpeg\|split2.mpeg\|split3.mpeg
 @end example
 
 Note that you may need to escape the character "|" which is special for
@@ -183,10 +183,10 @@ application specified in @var{app}, may be prefixed by "mp4:".
 
 @end table
 
-For example to read with @file{ffplay} a multimedia resource named
+For example to read with @file{avplay} a multimedia resource named
 "sample" from the application "vod" from an RTMP server "myserver":
 @example
-ffplay rtmp://myserver/vod/sample
+avplay rtmp://myserver/vod/sample
 @end example
 
 @section rtmp, rtmpe, rtmps, rtmpt, rtmpte
@@ -224,9 +224,9 @@ For example, to stream a file in real-time to an RTMP server using
 ffmpeg -re -i myfile -f flv rtmp://myserver/live/mystream
 @end example
 
-To play the same stream using @file{ffplay}:
+To play the same stream using @file{avplay}:
 @example
-ffplay "rtmp://myserver/live/mystream live=1"
+avplay "rtmp://myserver/live/mystream live=1"
 @end example
 
 @section rtp
@@ -281,7 +281,7 @@ When receiving data over UDP, the demuxer tries to reorder received packets
 order for this to be enabled, a maximum delay must be specified in the
 @code{max_delay} field of AVFormatContext.
 
-When watching multi-bitrate Real-RTSP streams with @file{ffplay}, the
+When watching multi-bitrate Real-RTSP streams with @file{avplay}, the
 streams to display can be chosen with @code{-vst} @var{n} and
 @code{-ast} @var{n} for video and audio respectively, and can be switched
 on the fly by pressing @code{v} and @code{a}.
@@ -291,13 +291,13 @@ Example command lines:
 To watch a stream over UDP, with a max reordering delay of 0.5 seconds:
 
 @example
-ffplay -max_delay 500000 rtsp://server/video.mp4?udp
+avplay -max_delay 500000 rtsp://server/video.mp4?udp
 @end example
 
 To watch a stream tunneled over HTTP:
 
 @example
-ffplay rtsp://server/video.mp4?http
+avplay rtsp://server/video.mp4?http
 @end example
 
 To send a stream in realtime to a RTSP server, for others to watch:
@@ -358,13 +358,13 @@ To broadcast a stream on the local subnet, for watching in VLC:
 ffmpeg -re -i @var{input} -f sap sap://224.0.0.255?same_port=1
 @end example
 
-Similarly, for watching in ffplay:
+Similarly, for watching in avplay:
 
 @example
 ffmpeg -re -i @var{input} -f sap sap://224.0.0.255
 @end example
 
-And for watching in ffplay, over IPv6:
+And for watching in avplay, over IPv6:
 
 @example
 ffmpeg -re -i @var{input} -f sap sap://[ff0e::1:2:3:4]
@@ -389,13 +389,13 @@ Example command lines follow.
 To play back the first stream announced on the normal SAP multicast address:
 
 @example
-ffplay sap://
+avplay sap://
 @end example
 
 To play back the first stream announced on one the default IPv6 SAP multicast address:
 
 @example
-ffplay sap://[ff0e::2:7ffe]
+avplay sap://[ff0e::2:7ffe]
 @end example
 
 @section tcp
@@ -414,7 +414,7 @@ Listen for an incoming connection
 
 @example
 ffmpeg -i @var{input} -f @var{format} tcp://@var{hostname}:@var{port}?listen
-ffplay tcp://@var{hostname}:@var{port}
+avplay tcp://@var{hostname}:@var{port}
 @end example
 
 @end table