7.10.3 commit

was due to a missing fix for the password prompting

.cvsignore

@@ -0,0 +1,11 @@
+config.log
+Makefile
+libtool
+Makefile.in
+aclocal.m4
+configure
+config.h
+config.status
+curl-config
+autom4te.cache
+depcomp

COPYING

@@ -0,0 +1,21 @@
+COPYRIGHT AND PERMISSION NOTICE
+
+Copyright (c) 1996 - 2002, Daniel Stenberg, <daniel@haxx.se>.
+
+All rights reserved.
+
+Permission to use, copy, modify, and distribute this software for any purpose
+with or without fee is hereby granted, provided that the above copyright
+notice and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN
+NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
+OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of a copyright holder shall not
+be used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization of the copyright holder.

CVS-INFO

@@ -30,6 +30,11 @@ To build after having extracted everything from CVS, do this:
 ./configure
 make
 
+  Daniel uses a ./configure line similar to this for easier development:
+
+  ./configure --disable-shared --enable-debug --enable-maintainer-mode
+
+
 REQUIREMENTS
 
  You need the following software installed:
@@ -48,7 +53,9 @@ REQUIREMENTS
 
 MAC OS X
 
- For Mac OS X users, Guido Neitzer write down the following step-by-step guide:
+ With Mac OS X 10.2 and the associated Developer Tools, the installed versions
+ of the build tools are adequate.  For Mac OS X 10.1 users, Guido Neitzer
+ wrote the following step-by-step guide:
 
  1. Install fink (http://fink.sourceforge.net)
  2. Update fink to the newest version (with the installed fink)

LEGAL

@@ -1,4 +1,4 @@
- Copyright (C) 1998-2001, Daniel Stenberg, <daniel@haxx.se>, et al.
+ Copyright (C) 1998-2002, Daniel Stenberg, <daniel@haxx.se>, et al.
 
  Everyone is permitted to copy and distribute verbatim copies of this license
  document, but changing it is not allowed.

MITX.txt

@@ -1,27 +0,0 @@
-COPYRIGHT AND PERMISSION NOTICE
-
-Copyright (c) 1996 - 2001, Daniel Stenberg, <daniel@haxx.se>.
-
-All rights reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, and/or sell copies of the
-Software, and to permit persons to whom the Software is furnished to do so,
-provided that the above copyright notice(s) and this permission notice appear
-in all copies of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN
-NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE
-LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY
-DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
-CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
-Except as contained in this notice, the name of a copyright holder shall not
-be used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization of the copyright holder.
-

MPL-1.1.txt

@@ -1,470 +0,0 @@
-                          MOZILLA PUBLIC LICENSE
-                                Version 1.1
-
-                              ---------------
-
-1. Definitions.
-
-     1.0.1. "Commercial Use" means distribution or otherwise making the
-     Covered Code available to a third party.
-
-     1.1. "Contributor" means each entity that creates or contributes to
-     the creation of Modifications.
-
-     1.2. "Contributor Version" means the combination of the Original
-     Code, prior Modifications used by a Contributor, and the Modifications
-     made by that particular Contributor.
-
-     1.3. "Covered Code" means the Original Code or Modifications or the
-     combination of the Original Code and Modifications, in each case
-     including portions thereof.
-
-     1.4. "Electronic Distribution Mechanism" means a mechanism generally
-     accepted in the software development community for the electronic
-     transfer of data.
-
-     1.5. "Executable" means Covered Code in any form other than Source
-     Code.
-
-     1.6. "Initial Developer" means the individual or entity identified
-     as the Initial Developer in the Source Code notice required by Exhibit
-     A.
-
-     1.7. "Larger Work" means a work which combines Covered Code or
-     portions thereof with code not governed by the terms of this License.
-
-     1.8. "License" means this document.
-
-     1.8.1. "Licensable" means having the right to grant, to the maximum
-     extent possible, whether at the time of the initial grant or
-     subsequently acquired, any and all of the rights conveyed herein.
-
-     1.9. "Modifications" means any addition to or deletion from the
-     substance or structure of either the Original Code or any previous
-     Modifications. When Covered Code is released as a series of files, a
-     Modification is:
-          A. Any addition to or deletion from the contents of a file
-          containing Original Code or previous Modifications.
-
-          B. Any new file that contains any part of the Original Code or
-          previous Modifications.
-
-     1.10. "Original Code" means Source Code of computer software code
-     which is described in the Source Code notice required by Exhibit A as
-     Original Code, and which, at the time of its release under this
-     License is not already Covered Code governed by this License.
-
-     1.10.1. "Patent Claims" means any patent claim(s), now owned or
-     hereafter acquired, including without limitation,  method, process,
-     and apparatus claims, in any patent Licensable by grantor.
-
-     1.11. "Source Code" means the preferred form of the Covered Code for
-     making modifications to it, including all modules it contains, plus
-     any associated interface definition files, scripts used to control
-     compilation and installation of an Executable, or source code
-     differential comparisons against either the Original Code or another
-     well known, available Covered Code of the Contributor's choice. The
-     Source Code can be in a compressed or archival form, provided the
-     appropriate decompression or de-archiving software is widely available
-     for no charge.
-
-     1.12. "You" (or "Your")  means an individual or a legal entity
-     exercising rights under, and complying with all of the terms of, this
-     License or a future version of this License issued under Section 6.1.
-     For legal entities, "You" includes any entity which controls, is
-     controlled by, or is under common control with You. For purposes of
-     this definition, "control" means (a) the power, direct or indirect,
-     to cause the direction or management of such entity, whether by
-     contract or otherwise, or (b) ownership of more than fifty percent
-     (50%) of the outstanding shares or beneficial ownership of such
-     entity.
-
-2. Source Code License.
-
-     2.1. The Initial Developer Grant.
-     The Initial Developer hereby grants You a world-wide, royalty-free,
-     non-exclusive license, subject to third party intellectual property
-     claims:
-          (a)  under intellectual property rights (other than patent or
-          trademark) Licensable by Initial Developer to use, reproduce,
-          modify, display, perform, sublicense and distribute the Original
-          Code (or portions thereof) with or without Modifications, and/or
-          as part of a Larger Work; and
-
-          (b) under Patents Claims infringed by the making, using or
-          selling of Original Code, to make, have made, use, practice,
-          sell, and offer for sale, and/or otherwise dispose of the
-          Original Code (or portions thereof).
-
-          (c) the licenses granted in this Section 2.1(a) and (b) are
-          effective on the date Initial Developer first distributes
-          Original Code under the terms of this License.
-
-          (d) Notwithstanding Section 2.1(b) above, no patent license is
-          granted: 1) for code that You delete from the Original Code; 2)
-          separate from the Original Code;  or 3) for infringements caused
-          by: i) the modification of the Original Code or ii) the
-          combination of the Original Code with other software or devices.
-
-     2.2. Contributor Grant.
-     Subject to third party intellectual property claims, each Contributor
-     hereby grants You a world-wide, royalty-free, non-exclusive license
-
-          (a)  under intellectual property rights (other than patent or
-          trademark) Licensable by Contributor, to use, reproduce, modify,
-          display, perform, sublicense and distribute the Modifications
-          created by such Contributor (or portions thereof) either on an
-          unmodified basis, with other Modifications, as Covered Code
-          and/or as part of a Larger Work; and
-
-          (b) under Patent Claims infringed by the making, using, or
-          selling of  Modifications made by that Contributor either alone
-          and/or in combination with its Contributor Version (or portions
-          of such combination), to make, use, sell, offer for sale, have
-          made, and/or otherwise dispose of: 1) Modifications made by that
-          Contributor (or portions thereof); and 2) the combination of
-          Modifications made by that Contributor with its Contributor
-          Version (or portions of such combination).
-
-          (c) the licenses granted in Sections 2.2(a) and 2.2(b) are
-          effective on the date Contributor first makes Commercial Use of
-          the Covered Code.
-
-          (d)    Notwithstanding Section 2.2(b) above, no patent license is
-          granted: 1) for any code that Contributor has deleted from the
-          Contributor Version; 2)  separate from the Contributor Version;
-          3)  for infringements caused by: i) third party modifications of
-          Contributor Version or ii)  the combination of Modifications made
-          by that Contributor with other software  (except as part of the
-          Contributor Version) or other devices; or 4) under Patent Claims
-          infringed by Covered Code in the absence of Modifications made by
-          that Contributor.
-
-3. Distribution Obligations.
-
-     3.1. Application of License.
-     The Modifications which You create or to which You contribute are
-     governed by the terms of this License, including without limitation
-     Section 2.2. The Source Code version of Covered Code may be
-     distributed only under the terms of this License or a future version
-     of this License released under Section 6.1, and You must include a
-     copy of this License with every copy of the Source Code You
-     distribute. You may not offer or impose any terms on any Source Code
-     version that alters or restricts the applicable version of this
-     License or the recipients' rights hereunder. However, You may include
-     an additional document offering the additional rights described in
-     Section 3.5.
-
-     3.2. Availability of Source Code.
-     Any Modification which You create or to which You contribute must be
-     made available in Source Code form under the terms of this License
-     either on the same media as an Executable version or via an accepted
-     Electronic Distribution Mechanism to anyone to whom you made an
-     Executable version available; and if made available via Electronic
-     Distribution Mechanism, must remain available for at least twelve (12)
-     months after the date it initially became available, or at least six
-     (6) months after a subsequent version of that particular Modification
-     has been made available to such recipients. You are responsible for
-     ensuring that the Source Code version remains available even if the
-     Electronic Distribution Mechanism is maintained by a third party.
-
-     3.3. Description of Modifications.
-     You must cause all Covered Code to which You contribute to contain a
-     file documenting the changes You made to create that Covered Code and
-     the date of any change. You must include a prominent statement that
-     the Modification is derived, directly or indirectly, from Original
-     Code provided by the Initial Developer and including the name of the
-     Initial Developer in (a) the Source Code, and (b) in any notice in an
-     Executable version or related documentation in which You describe the
-     origin or ownership of the Covered Code.
-
-     3.4. Intellectual Property Matters
-          (a) Third Party Claims.
-          If Contributor has knowledge that a license under a third party's
-          intellectual property rights is required to exercise the rights
-          granted by such Contributor under Sections 2.1 or 2.2,
-          Contributor must include a text file with the Source Code
-          distribution titled "LEGAL" which describes the claim and the
-          party making the claim in sufficient detail that a recipient will
-          know whom to contact. If Contributor obtains such knowledge after
-          the Modification is made available as described in Section 3.2,
-          Contributor shall promptly modify the LEGAL file in all copies
-          Contributor makes available thereafter and shall take other steps
-          (such as notifying appropriate mailing lists or newsgroups)
-          reasonably calculated to inform those who received the Covered
-          Code that new knowledge has been obtained.
-
-          (b) Contributor APIs.
-          If Contributor's Modifications include an application programming
-          interface and Contributor has knowledge of patent licenses which
-          are reasonably necessary to implement that API, Contributor must
-          also include this information in the LEGAL file.
-
-               (c)    Representations.
-          Contributor represents that, except as disclosed pursuant to
-          Section 3.4(a) above, Contributor believes that Contributor's
-          Modifications are Contributor's original creation(s) and/or
-          Contributor has sufficient rights to grant the rights conveyed by
-          this License.
-
-     3.5. Required Notices.
-     You must duplicate the notice in Exhibit A in each file of the Source
-     Code.  If it is not possible to put such notice in a particular Source
-     Code file due to its structure, then You must include such notice in a
-     location (such as a relevant directory) where a user would be likely
-     to look for such a notice.  If You created one or more Modification(s)
-     You may add your name as a Contributor to the notice described in
-     Exhibit A.  You must also duplicate this License in any documentation
-     for the Source Code where You describe recipients' rights or ownership
-     rights relating to Covered Code.  You may choose to offer, and to
-     charge a fee for, warranty, support, indemnity or liability
-     obligations to one or more recipients of Covered Code. However, You
-     may do so only on Your own behalf, and not on behalf of the Initial
-     Developer or any Contributor. You must make it absolutely clear than
-     any such warranty, support, indemnity or liability obligation is
-     offered by You alone, and You hereby agree to indemnify the Initial
-     Developer and every Contributor for any liability incurred by the
-     Initial Developer or such Contributor as a result of warranty,
-     support, indemnity or liability terms You offer.
-
-     3.6. Distribution of Executable Versions.
-     You may distribute Covered Code in Executable form only if the
-     requirements of Section 3.1-3.5 have been met for that Covered Code,
-     and if You include a notice stating that the Source Code version of
-     the Covered Code is available under the terms of this License,
-     including a description of how and where You have fulfilled the
-     obligations of Section 3.2. The notice must be conspicuously included
-     in any notice in an Executable version, related documentation or
-     collateral in which You describe recipients' rights relating to the
-     Covered Code. You may distribute the Executable version of Covered
-     Code or ownership rights under a license of Your choice, which may
-     contain terms different from this License, provided that You are in
-     compliance with the terms of this License and that the license for the
-     Executable version does not attempt to limit or alter the recipient's
-     rights in the Source Code version from the rights set forth in this
-     License. If You distribute the Executable version under a different
-     license You must make it absolutely clear that any terms which differ
-     from this License are offered by You alone, not by the Initial
-     Developer or any Contributor. You hereby agree to indemnify the
-     Initial Developer and every Contributor for any liability incurred by
-     the Initial Developer or such Contributor as a result of any such
-     terms You offer.
-
-     3.7. Larger Works.
-     You may create a Larger Work by combining Covered Code with other code
-     not governed by the terms of this License and distribute the Larger
-     Work as a single product. In such a case, You must make sure the
-     requirements of this License are fulfilled for the Covered Code.
-
-4. Inability to Comply Due to Statute or Regulation.
-
-     If it is impossible for You to comply with any of the terms of this
-     License with respect to some or all of the Covered Code due to
-     statute, judicial order, or regulation then You must: (a) comply with
-     the terms of this License to the maximum extent possible; and (b)
-     describe the limitations and the code they affect. Such description
-     must be included in the LEGAL file described in Section 3.4 and must
-     be included with all distributions of the Source Code. Except to the
-     extent prohibited by statute or regulation, such description must be
-     sufficiently detailed for a recipient of ordinary skill to be able to
-     understand it.
-
-5. Application of this License.
-
-     This License applies to code to which the Initial Developer has
-     attached the notice in Exhibit A and to related Covered Code.
-
-6. Versions of the License.
-
-     6.1. New Versions.
-     Netscape Communications Corporation ("Netscape") may publish revised
-     and/or new versions of the License from time to time. Each version
-     will be given a distinguishing version number.
-
-     6.2. Effect of New Versions.
-     Once Covered Code has been published under a particular version of the
-     License, You may always continue to use it under the terms of that
-     version. You may also choose to use such Covered Code under the terms
-     of any subsequent version of the License published by Netscape. No one
-     other than Netscape has the right to modify the terms applicable to
-     Covered Code created under this License.
-
-     6.3. Derivative Works.
-     If You create or use a modified version of this License (which you may
-     only do in order to apply it to code which is not already Covered Code
-     governed by this License), You must (a) rename Your license so that
-     the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape",
-     "MPL", "NPL" or any confusingly similar phrase do not appear in your
-     license (except to note that your license differs from this License)
-     and (b) otherwise make it clear that Your version of the license
-     contains terms which differ from the Mozilla Public License and
-     Netscape Public License. (Filling in the name of the Initial
-     Developer, Original Code or Contributor in the notice described in
-     Exhibit A shall not of themselves be deemed to be modifications of
-     this License.)
-
-7. DISCLAIMER OF WARRANTY.
-
-     COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS,
-     WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
-     WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF
-     DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING.
-     THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE
-     IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT,
-     YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE
-     COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER
-     OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF
-     ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
-
-8. TERMINATION.
-
-     8.1.  This License and the rights granted hereunder will terminate
-     automatically if You fail to comply with terms herein and fail to cure
-     such breach within 30 days of becoming aware of the breach. All
-     sublicenses to the Covered Code which are properly granted shall
-     survive any termination of this License. Provisions which, by their
-     nature, must remain in effect beyond the termination of this License
-     shall survive.
-
-     8.2.  If You initiate litigation by asserting a patent infringement
-     claim (excluding declatory judgment actions) against Initial Developer
-     or a Contributor (the Initial Developer or Contributor against whom
-     You file such action is referred to as "Participant")  alleging that:
-
-     (a)  such Participant's Contributor Version directly or indirectly
-     infringes any patent, then any and all rights granted by such
-     Participant to You under Sections 2.1 and/or 2.2 of this License
-     shall, upon 60 days notice from Participant terminate prospectively,
-     unless if within 60 days after receipt of notice You either: (i)
-     agree in writing to pay Participant a mutually agreeable reasonable
-     royalty for Your past and future use of Modifications made by such
-     Participant, or (ii) withdraw Your litigation claim with respect to
-     the Contributor Version against such Participant.  If within 60 days
-     of notice, a reasonable royalty and payment arrangement are not
-     mutually agreed upon in writing by the parties or the litigation claim
-     is not withdrawn, the rights granted by Participant to You under
-     Sections 2.1 and/or 2.2 automatically terminate at the expiration of
-     the 60 day notice period specified above.
-
-     (b)  any software, hardware, or device, other than such Participant's
-     Contributor Version, directly or indirectly infringes any patent, then
-     any rights granted to You by such Participant under Sections 2.1(b)
-     and 2.2(b) are revoked effective as of the date You first made, used,
-     sold, distributed, or had made, Modifications made by that
-     Participant.
-
-     8.3.  If You assert a patent infringement claim against Participant
-     alleging that such Participant's Contributor Version directly or
-     indirectly infringes any patent where such claim is resolved (such as
-     by license or settlement) prior to the initiation of patent
-     infringement litigation, then the reasonable value of the licenses
-     granted by such Participant under Sections 2.1 or 2.2 shall be taken
-     into account in determining the amount or value of any payment or
-     license.
-
-     8.4.  In the event of termination under Sections 8.1 or 8.2 above,
-     all end user license agreements (excluding distributors and resellers)
-     which have been validly granted by You or any distributor hereunder
-     prior to termination shall survive termination.
-
-9. LIMITATION OF LIABILITY.
-
-     UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT
-     (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL
-     DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,
-     OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
-     ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
-     CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,
-     WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
-     COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN
-     INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF
-     LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
-     RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW
-     PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE
-     EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
-     THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
-
-10. U.S. GOVERNMENT END USERS.
-
-     The Covered Code is a "commercial item," as that term is defined in
-     48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer
-     software" and "commercial computer software documentation," as such
-     terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48
-     C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995),
-     all U.S. Government End Users acquire Covered Code with only those
-     rights set forth herein.
-
-11. MISCELLANEOUS.
-
-     This License represents the complete agreement concerning subject
-     matter hereof. If any provision of this License is held to be
-     unenforceable, such provision shall be reformed only to the extent
-     necessary to make it enforceable. This License shall be governed by
-     California law provisions (except to the extent applicable law, if
-     any, provides otherwise), excluding its conflict-of-law provisions.
-     With respect to disputes in which at least one party is a citizen of,
-     or an entity chartered or registered to do business in the United
-     States of America, any litigation relating to this License shall be
-     subject to the jurisdiction of the Federal Courts of the Northern
-     District of California, with venue lying in Santa Clara County,
-     California, with the losing party responsible for costs, including
-     without limitation, court costs and reasonable attorneys' fees and
-     expenses. The application of the United Nations Convention on
-     Contracts for the International Sale of Goods is expressly excluded.
-     Any law or regulation which provides that the language of a contract
-     shall be construed against the drafter shall not apply to this
-     License.
-
-12. RESPONSIBILITY FOR CLAIMS.
-
-     As between Initial Developer and the Contributors, each party is
-     responsible for claims and damages arising, directly or indirectly,
-     out of its utilization of rights under this License and You agree to
-     work with Initial Developer and Contributors to distribute such
-     responsibility on an equitable basis. Nothing herein is intended or
-     shall be deemed to constitute any admission of liability.
-
-13. MULTIPLE-LICENSED CODE.
-
-     Initial Developer may designate portions of the Covered Code as
-     "Multiple-Licensed".  "Multiple-Licensed" means that the Initial
-     Developer permits you to utilize portions of the Covered Code under
-     Your choice of the NPL or the alternative licenses, if any, specified
-     by the Initial Developer in the file described in Exhibit A.
-
-EXHIBIT A -Mozilla Public License.
-
-     ``The contents of this file are subject to the Mozilla Public License
-     Version 1.1 (the "License"); you may not use this file except in
-     compliance with the License. You may obtain a copy of the License at
-     http://www.mozilla.org/MPL/
-
-     Software distributed under the License is distributed on an "AS IS"
-     basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
-     License for the specific language governing rights and limitations
-     under the License.
-
-     The Original Code is ______________________________________.
-
-     The Initial Developer of the Original Code is ________________________.
-     Portions created by ______________________ are Copyright (C) ______
-     _______________________. All Rights Reserved.
-
-     Contributor(s): ______________________________________.
-
-     Alternatively, the contents of this file may be used under the terms
-     of the _____ license (the  "[___] License"), in which case the
-     provisions of [______] License are applicable instead of those
-     above.  If you wish to allow use of your version of this file only
-     under the terms of the [____] License and not to allow others to use
-     your version of this file under the MPL, indicate your decision by
-     deleting  the provisions above and replace  them with the notice and
-     other provisions required by the [___] License.  If you do not delete
-     the provisions above, a recipient may use your version of this file
-     under either the MPL or the [___] License."
-
-     [NOTE: The text of this Exhibit A may differ slightly from the text of
-     the notices in the Source Code files of the Original Code. You should
-     use the text of this Exhibit A rather than the text found in the
-     Original Code Source Code for Your Modifications.]
-

Makefile.am

@@ -2,12 +2,10 @@
 # $Id$
 #
 
-AUTOMAKE_OPTIONS = foreign no-dependencies
+AUTOMAKE_OPTIONS = foreign
 
-EXTRA_DIST =						\
-	CHANGES LEGAL maketgz MITX.txt MPL-1.1.txt	\
-	reconf Makefile.dist curl-config.in build_vms.com curl-mode.el \
-	config-vms.h config-win32.h config-riscos.h config-mac.h
+EXTRA_DIST = CHANGES COPYING maketgz SSLCERTS reconf Makefile.dist	\
+curl-config.in build_vms.com curl-mode.el
 
 bin_SCRIPTS = curl-config
 
@@ -20,6 +18,9 @@ dist-hook:
 html:
 	cd docs; make html
 
+pdf:
+	cd docs; make pdf
+
 check: test
 
 test:
@@ -64,7 +65,7 @@ rpm:
 pkgadd:
 	umask 022 ; \
 	make install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
-	cat LEGAL MITX.txt MPL-1.1.txt > $(srcdir)/packages/Solaris/copyright ; \
+	cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
 	cd $(srcdir)/packages/Solaris && $(MAKE) package
 
 #

Makefile.dist

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___ 
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 2001, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # In order to be useful for every potential user, curl and libcurl are
 # dual-licensed under the MPL and the MIT/X-derivate licenses.
@@ -34,12 +34,12 @@ borland:
 	cd src & make -f Makefile.b32
 
 mingw32:
-	cd lib & make -f Makefile.m32
-	cd src & make -f Makefile.m32
+	cd lib & make -f Makefile.m32 ZLIB=1
+	cd src & make -f Makefile.m32 ZLIB=1
 
 mingw32-ssl:
-	cd lib & make -f Makefile.m32 SSL=1
-	cd src & make -f Makefile.m32 SSL=1
+	cd lib & make -f Makefile.m32 SSL=1 ZLIB=1
+	cd src & make -f Makefile.m32 SSL=1 ZLIB=1
 
 vc:
 	cd lib
@@ -51,6 +51,12 @@ vc-ssl:
 	cd lib
 	nmake -f Makefile.vc6 cfg=release-ssl
 	cd ..\src
+	nmake -f Makefile.vc6 cfg=release-ssl
+
+vc-ssl-dll:
+	cd lib
+	nmake -f Makefile.vc6 cfg=release-ssl-dll
+	cd ..\src
 	nmake -f Makefile.vc6
 
 cygwin:

README

@@ -19,15 +19,20 @@ README
 
   Study the LEGAL file for distribution terms and similar.
 
-  Always try the Curl web site for the latest news:
+  Visit the curl web site or mirrors for the latest news:
 
-        http://curl.haxx.se
+        http://curl.haxx.se/
+        http://curl.sf.net/
+        http://curl.planetmirror.com/
 
   The official download mirror sites are:
 
         Sweden    -- ftp://ftp.sunet.se/pub/www/utilities/curl/
         Sweden    -- http://cool.haxx.se/curl/
         Germany   -- ftp://ftp.fu-berlin.de/pub/unix/network/curl/
+        Australia -- http://curl.planetmirror.com/download/
+        US        -- http://curl.sourceforge.net/download/
+        Hongkong  -- http://www.execve.net/curl/
 
   To download the very latest source off the CVS server do this:
 

SSLCERTS

@@ -0,0 +1,35 @@
+                      Peer SSL Certificate Verification
+                      =================================
+
+Starting in 7.10, libcurl performs peer SSL certificate verification by
+default. This is done by installing a default CA cert bundle on 'make install'
+(or similar), that CA bundle package is used by default on operations against
+SSL servers.
+
+Alas, if you communicate with HTTPS servers using certifcates that are signed
+by CAs present in the bundle, you will not notice any changed behavior and you
+will seeminglessly get a higher security level on your SSL connections since
+can be sure that the remote server really is the one it claims to be.
+
+If the remote server uses a self-signed certificate, or if you don't install
+curl's CA cert bundle or if it uses a certificate signed by a CA that isn't
+included in the bundle, then you need to do one of the following:
+
+ 1. Tell libcurl to *not* verify the peer. With libcurl you disable with with
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, FALSE);
+
+    With the curl command tool, you disable this with -k/--insecure.
+
+ 2. Get a CA certificate that can verify the remote server and use the proper
+    option to point out this CA cert for verification when connecting. For
+    libcurl hackers: curl_easy_setopt(curl, CURLOPT_CAPATH, capath);
+
+    With the curl command tool: --cacert [file]
+
+This upgrade procedure has been deemed The Right Thing even though it adds
+this extra trouble for some users, since it adds security to a majority of the
+SSL connections that previously weren't really secure.
+
+It turned out many people were using previous versions of curl/libcurl without
+realizing the need for the CA cert options to get truly secure SSL
+connections.

acconfig.h

@@ -64,3 +64,27 @@
 
 /* Define this to 'int' if in_addr_t is not an available typedefed type */
 #undef in_addr_t
+
+/* Define to disable DICT */
+#undef CURL_DISABLE_DICT
+
+/* Define to disable FILE */
+#undef CURL_DISABLE_FILE
+
+/* Define to disable FTP */
+#undef CURL_DISABLE_FTP
+
+/* Define to disable GOPHER */
+#undef CURL_DISABLE_GOPHER
+
+/* Define to disable HTTP */
+#undef CURL_DISABLE_HTTP
+
+/* Define to disable LDAP */
+#undef CURL_DISABLE_LDAP
+
+/* Define to disable TELNET */
+#undef CURL_DISABLE_TELNET
+
+/* Define if you have zlib present */
+#undef HAVE_LIBZ

acinclude.m4

@@ -176,7 +176,7 @@ AC_DEFUN([TYPE_IN_ADDR_T],
       AC_DEFINE_UNQUOTED(in_addr_t, $curl_cv_in_addr_t_equiv,
 			[type to use in place of in_addr_t if not defined])],
       [#include <sys/types.h>
-#include <sys/socket.h>,
+#include <sys/socket.h>
 #include <arpa/inet.h>])
 ])
 
@@ -377,6 +377,7 @@ AC_DEFUN(CURL_CHECK_GETHOSTBYNAME_R,
 
 int
 gethostbyname_r(const char *, struct hostent *, struct hostent_data *);],[
+struct hostent_data data;
 gethostbyname_r(NULL, NULL, NULL);],[
       AC_MSG_RESULT(yes)
       AC_DEFINE(HAVE_GETHOSTBYNAME_R_3)
@@ -394,6 +395,7 @@ gethostbyname_r(NULL, NULL, NULL);],[
 
 int
 gethostbyname_r(const char *,struct hostent *, struct hostent_data *);],[
+struct hostent_data data;
 gethostbyname_r(NULL, NULL, NULL);],[
 	AC_MSG_RESULT(yes)
 	AC_DEFINE(HAVE_GETHOSTBYNAME_R_3)

build_vms.com

@@ -6,14 +6,16 @@ $	loc  = f$environment("PROCEDURE")
 $	def = f$parse("X.X;1",loc) - "X.X;1"
 $
 $	set def 'def'
-$	cc_qual = "/define=HAVE_CONFIG_H=1/include=(""../include/"",""../"")"
+$	cc_qual = "/define=HAVE_CONFIG_H=1/include=(""../include/"",""../"",""../../openssl-0_9_6c/include/"")"
 $	if p1 .eqs. "LISTING" then cc_qual = cc_qual + "/LIST/MACHINE"
 $	if p1 .eqs. "DEBUG" then cc_qual = cc_qual + "/LIST/MACHINE/DEBUG"
 $	msg_qual = ""
 $	call build "[.lib]" "*.c"
 $	call build "[.src]" "*.c"
 $	call build "[.src]" "*.msg"
-$	link /exe=curl.exe [.src]curl/lib/include=main,[.lib]curl/lib
+$	link /exe=curl.exe [.src]curl/lib/include=main,[.lib]curl/lib, -
+		[-.openssl-0_9_6c.axp.exe.ssl]libssl/lib, -
+		[-.openssl-0_9_6c.axp.exe.crypto]libcrypto/lib
 $
 $
 $	goto Common_Exit

buildconf

@@ -8,4 +8,4 @@ die(){
 aclocal           || die "The command 'aclocal' failed"
 autoheader        || die "The command 'autoheader' failed"
 autoconf          || die "The command 'autoconf' failed"
-automake          || die "The command 'automake $MAKEFILES' failed"
+automake -a       || die "The command 'automake $MAKEFILES' failed"

config-riscos.h

@@ -1,25 +0,0 @@
-
-#define socklen_t int
-
-#define HAVE_SYS_SOCKET_H
-#define HAVE_ARPA_INET_H
-#define HAVE_SYS_SELECT_H
-#define HAVE_FCNTL_H
-#define HAVE_GETTIMEOFDAY
-
-#define HAVE_SELECT
-#define HAVE_SOCKET
-#define ifr_dstaddr ifr_addr
-
-
-#include <sys/socket.h>
-#include <sys/if.h>
-#include <sys/fcntl.h>
-#include <sys/ioctl.h>
-#include <netinet/in.h>
-#include <netdb.h>
-
-#define ioctl(a,b,c,d) (ioctl(a,b,c) * (d==d))
-
-
-#define OS "RISC OS"

configure.in

@@ -8,7 +8,8 @@ AC_PREREQ(2.50)
 dnl First some basic init macros
 AC_INIT
 AC_CONFIG_SRCDIR([lib/urldata.h])
-AM_CONFIG_HEADER(config.h src/config.h)
+AM_CONFIG_HEADER(lib/config.h src/config.h tests/server/config.h lib/ca-bundle.h)
+AM_MAINTAINER_MODE
 
 dnl figure out the libcurl version
 VERSION=`sed -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curl.h`
@@ -34,7 +35,7 @@ dnl
 
 AC_CANONICAL_HOST
 dnl Get system canonical name
-AC_DEFINE_UNQUOTED(OS, "${host}")
+AC_DEFINE_UNQUOTED(OS, "${host}", [cpu-machine-OS])
 
 dnl Check for AIX weirdos
 AC_AIX
@@ -51,29 +52,133 @@ AC_LIBTOOL_WIN32_DLL
 dnl libtool setup
 AM_PROG_LIBTOOL
 
+case $host in
+  *-*-cygwin | *-*-mingw* | *-*-pw32*)
+    need_no_undefined=yes
+    ;;
+  *)
+    need_no_undefined=no
+    ;;
+esac
+
+AM_CONDITIONAL(NO_UNDEFINED, test x$need_no_undefined = xyes)
+
 dnl The install stuff has already been taken care of by the automake stuff
 dnl AC_PROG_INSTALL
 AC_PROG_MAKE_SET
 
 dnl ************************************************************
-dnl lame option to switch on debug options
+dnl switch off particular protocols
 dnl
-AC_MSG_CHECKING([whether to enable debug options])
-AC_ARG_ENABLE(debug,
-[  --enable-debug		Enable pedantic debug options
-  --disable-debug		Disable debug options],
+AC_MSG_CHECKING([whether to support http])
+AC_ARG_ENABLE(http,
+[  --enable-http		Enable HTTP support
+  --disable-http	Disable HTTP support],
 [ case "$enableval" in
   no)
        AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_HTTP, 1, [to disable HTTP])
+       AC_MSG_WARN([disable HTTP disables FTP over proxy and GOPHER too])
+       AC_DEFINE(CURL_DISABLE_GOPHER, 1, [to disable GOPHER])
+       AC_SUBST(CURL_DISABLE_HTTP)
+       AC_SUBST(CURL_DISABLE_GOPHER)
        ;;
   *)   AC_MSG_RESULT(yes)
-
-    CPPFLAGS="$CPPFLAGS -DMALLOCDEBUG"
-    CFLAGS="-W -Wall -Wwrite-strings -pedantic -g" 
        ;;
   esac ],
-       AC_MSG_RESULT(no)
+       AC_MSG_RESULT(yes)
 )
+AC_MSG_CHECKING([whether to support ftp])
+AC_ARG_ENABLE(ftp,
+[  --enable-ftp		Enable FTP support
+  --disable-ftp	Disable FTP support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_FTP, 1, [to disable FTP])
+       AC_SUBST(CURL_DISABLE_FTP)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support gopher])
+AC_ARG_ENABLE(gopher,
+[  --enable-gopher		Enable GOPHER support
+  --disable-gopher	Disable GOPHER support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_GOPHER, 1, [to disable GOPHER])
+       AC_SUBST(CURL_DISABLE_GOPHER)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support file])
+AC_ARG_ENABLE(file,
+[  --enable-file		Enable FILE support
+  --disable-file	Disable FILE support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_FILE, 1, [to disable FILE])
+       AC_SUBST(CURL_DISABLE_FILE)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support ldap])
+AC_ARG_ENABLE(ldap,
+[  --enable-ldap		Enable LDAP support
+  --disable-ldap	Disable LDAP support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
+       AC_SUBST(CURL_DISABLE_LDAP)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support dict])
+AC_ARG_ENABLE(dict,
+[  --enable-dict		Enable DICT support
+  --disable-dict	Disable DICT support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_DICT, 1 [to disable DICT])
+       AC_SUBST(CURL_DISABLE_DICT)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support telnet])
+AC_ARG_ENABLE(telnet,
+[  --enable-telnet		Enable TELNET support
+  --disable-telnet	Disable TELNET support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_TELNET, 1, [to disable TELNET])
+       AC_SUBST(CURL_DISABLE_TELNET)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+
 
 dnl **********************************************************************
 dnl Checks for IPv6
@@ -82,7 +187,7 @@ dnl **********************************************************************
 AC_MSG_CHECKING([whether to enable ipv6])
 AC_ARG_ENABLE(ipv6,
 [  --enable-ipv6		Enable ipv6 (with ipv4) support
-  --disable-ipv6		Disable ipv6 support],
+  --disable-ipv6	Disable ipv6 support],
 [ case "$enableval" in
   no)
        AC_MSG_RESULT(no)
@@ -122,11 +227,11 @@ dnl Checks for libraries.
 dnl **********************************************************************
 
 dnl gethostbyname in the nsl lib?
-AC_CHECK_FUNC(gethostbyname, , AC_CHECK_LIB(nsl, gethostbyname))
+AC_CHECK_FUNC(gethostbyname, , [ AC_CHECK_LIB(nsl, gethostbyname) ])
 
 if test "$ac_cv_lib_nsl_gethostbyname" != "yes" -a "$ac_cv_func_gethostbyname" != "yes"; then
   dnl gethostbyname in the socket lib?
-  AC_CHECK_FUNC(gethostbyname, , AC_CHECK_LIB(socket, gethostbyname))
+  AC_CHECK_FUNC(gethostbyname, , [ AC_CHECK_LIB(socket, gethostbyname) ])
 fi
 
 dnl At least one system has been identified to require BOTH nsl and
@@ -151,7 +256,7 @@ if test "$ac_cv_lib_nsl_gethostbyname" = "$ac_cv_func_gethostbyname"; then
 fi
 
 dnl resolve lib?
-AC_CHECK_FUNC(strcasecmp, , AC_CHECK_LIB(resolve, strcasecmp))
+AC_CHECK_FUNC(strcasecmp, , [ AC_CHECK_LIB(resolve, strcasecmp) ])
 
 if test "$ac_cv_lib_resolve_strcasecmp" = "$ac_cv_func_strcasecmp"; then
   AC_CHECK_LIB(resolve, strcasecmp,
@@ -161,13 +266,10 @@ if test "$ac_cv_lib_resolve_strcasecmp" = "$ac_cv_func_strcasecmp"; then
 fi
 
 dnl socket lib?
-AC_CHECK_FUNC(connect, , AC_CHECK_LIB(socket, connect))
-
-dnl ucb lib?
-AC_CHECK_FUNC(gethostname, , AC_CHECK_LIB(ucb, gethostname))
+AC_CHECK_FUNC(connect, , [ AC_CHECK_LIB(socket, connect) ])
 
 dnl dl lib?
-AC_CHECK_FUNC(dlclose, , AC_CHECK_LIB(dl, dlopen))
+AC_CHECK_FUNC(dlclose, , [ AC_CHECK_LIB(dl, dlopen) ])
 
 dnl **********************************************************************
 dnl Check how non-blocking sockets are set
@@ -178,7 +280,8 @@ AC_ARG_ENABLE(nonblocking,
 [
   if test "$enableval" = "no" ; then
     AC_MSG_WARN([non-blocking sockets disabled])
-    AC_DEFINE(HAVE_DISABLED_NONBLOCKING)
+    AC_DEFINE(HAVE_DISABLED_NONBLOCKING, 1,
+    [to disable NON-BLOCKING connections])
   else
     CURL_CHECK_NONBLOCKING_SOCKET
   fi
@@ -196,7 +299,8 @@ AC_ARG_WITH(egd-socket,
     [ EGD_SOCKET="$withval" ]
 )
 if test -n "$EGD_SOCKET" ; then
-	AC_DEFINE_UNQUOTED(EGD_SOCKET, "$EGD_SOCKET")
+	AC_DEFINE_UNQUOTED(EGD_SOCKET, "$EGD_SOCKET",
+        [your Entropy Gathering Daemon socket pathname] )
 fi
 
 dnl Check for user-specified random device
@@ -205,16 +309,13 @@ AC_ARG_WITH(random,
     [ RANDOM_FILE="$withval" ],
     [
         dnl Check for random device
-        AC_CHECK_FILE("/dev/urandom",
-            [
-                RANDOM_FILE="/dev/urandom";
-            ]
-        )
+        AC_CHECK_FILE("/dev/urandom", [ RANDOM_FILE="/dev/urandom"] )
     ]
 )
 if test -n "$RANDOM_FILE" ; then
 	AC_SUBST(RANDOM_FILE)
-	AC_DEFINE_UNQUOTED(RANDOM_FILE, "$RANDOM_FILE")
+	AC_DEFINE_UNQUOTED(RANDOM_FILE, "$RANDOM_FILE",
+        [a suitable file to read random data from])
 fi
 
 dnl **********************************************************************
@@ -276,7 +377,7 @@ then
     AC_CHECK_HEADERS(des.h)
 
     dnl resolv lib?
-    AC_CHECK_FUNC(res_search, , AC_CHECK_LIB(resolv, res_search))
+    AC_CHECK_FUNC(res_search, , [AC_CHECK_LIB(resolv, res_search)])
 
     dnl Check for the Kerberos4 library
     AC_CHECK_LIB(krb, krb_net_read,
@@ -292,7 +393,8 @@ then
       AC_CHECK_FUNCS(krb_get_our_ip_for_realm)
 
       dnl add define KRB4
-      AC_DEFINE(KRB4)
+      AC_DEFINE(KRB4, 1,
+      [if you have the Kerberos4 libraries (including -ldes)])
 
       dnl substitute it too!
       KRB4_ENABLED=1
@@ -315,10 +417,9 @@ dnl **********************************************************************
 dnl Default to compiler & linker defaults for SSL files & libraries.
 OPT_SSL=off
 AC_ARG_WITH(ssl,dnl
-[  --with-ssl[=DIR]        where to look for SSL [compiler/linker default paths]
-                          DIR points to the SSL installation [/usr/local/ssl]],
-  OPT_SSL=$withval
-)
+AC_HELP_STRING([--with-ssl=PATH], [where to look for SSL, PATH points to the SSL installation (default: /usr/local/ssl)])
+AC_HELP_STRING([--without-ssl], [disable SSL]),
+  OPT_SSL=$withval)
 
 if test X"$OPT_SSL" = Xno
 then
@@ -392,9 +493,9 @@ else
         OPENSSL_ENABLED=1)
     fi
 
-    dnl Check for the OpenSSL engine header, it is kind of "separated"
-    dnl from the main SSL check
-    AC_CHECK_HEADERS(openssl/engine.h)
+    dnl If the ENGINE library seems to be around, check for the OpenSSL engine
+    dnl header, it is kind of "separated" from the main SSL check
+    AC_CHECK_FUNC(ENGINE_init, [ AC_CHECK_HEADERS(openssl/engine.h) ])
 
     AC_SUBST(OPENSSL_ENABLED)
 
@@ -418,34 +519,43 @@ dnl **********************************************************************
 dnl Check for the presence of ZLIB libraries and headers
 dnl **********************************************************************
 
-dnl Default to compiler & linker defaults for files & libraries.
-dnl OPT_ZLIB=no
-dnl AC_ARG_WITH(zlib,dnl
-dnl [  --with-zlib[=DIR]  where to look for ZLIB [compiler/linker default paths]
-dnl                      DIR points to the ZLIB installation prefix [/usr/local]],
-dnl  OPT_ZLIB=$withval,
-dnl )
-
 dnl Check for & handle argument to --with-zlib.
-dnl
-dnl NOTE:  We *always* look for ZLIB headers & libraries, all this option
-dnl        does is change where we look (by adjusting LIBS and CPPFLAGS.)
-dnl
 
-dnl AC_MSG_CHECKING(where to look for ZLIB)
-dnl if test X"$OPT_ZLIB" = Xno
-dnl then
-dnl 	AC_MSG_RESULT([defaults (or given in environment)])
-dnl else
-dnl	test X"$OPT_ZLIB" = Xyes && OPT_ZLIB=/usr/local
-dnl	LIBS="$LIBS -L$OPT_ZLIB/lib"
-dnl	CPPFLAGS="$CPPFLAGS -I$OPT_ZLIB/include"
-dnl	AC_MSG_RESULT([$OPT_ZLIB])
-dnl fi
+_cppflags=$CPPFLAGS
+_ldflags=$LDFLAGS
+OPT_ZLIB="/usr/local"
+AC_ARG_WITH(zlib,
+  AC_HELP_STRING([--with-zlib=PATH], [search for zlib in PATH])
+  AC_HELP_STRING([--without-zlib], [disable use of zlib]),
+                 [OPT_ZLIB="$withval"])
 
-dnl z lib?
-dnl AC_CHECK_FUNC(gzread, , AC_CHECK_LIB(z, gzread))
+case "$OPT_ZLIB" in
+  no)
+    AC_MSG_WARN([zlib disabled]) ;;
+  *)
+    dnl check for the lib first without setting any new path, since many
+    dnl people have it in the default path
 
+    AC_CHECK_LIB(z, inflateEnd, ,
+                   [if test -d "$OPT_ZLIB"; then
+                      CPPFLAGS="$CPPFLAGS -I$OPT_ZLIB/include"
+                      LDFLAGS="$LDFLAGS -L$OPT_ZLIB/lib"
+                   fi])
+
+    AC_CHECK_HEADER(zlib.h,[
+      AC_CHECK_LIB(z, gzread,
+                   [HAVE_LIBZ="1"
+                   AC_SUBST(HAVE_LIBZ)
+                   LIBS="$LIBS -lz"
+                   AC_DEFINE(HAVE_ZLIB_H, 1, [if you have the zlib.h header file])
+                   AC_DEFINE(HAVE_LIBZ, 1, [If zlib is available])],
+                   [ CPPFLAGS=$_cppflags
+                   LDFLAGS=$_ldflags])],
+      [ CPPFLAGS=$_cppflags
+      LDFLAGS=$_ldflags]
+    )
+    ;;
+esac
 
 dnl Default is to try the thread-safe versions of a few functions
 OPT_THREAD=on
@@ -510,12 +620,11 @@ AC_CHECK_HEADERS( \
         io.h \
         pwd.h \
         utime.h \
-        sys/utime.h
+        sys/utime.h \
+        sys/poll.h \
+        setjmp.h
 )
 
-dnl Check for libz header
-dnl AC_CHECK_HEADERS(zlib.h)
-
 dnl Checks for typedefs, structures, and compiler characteristics.
 AC_C_CONST
 AC_TYPE_SIZE_T
@@ -524,9 +633,9 @@ AC_HEADER_TIME
 # mprintf() checks:
 
 # check for 'long double'
-AC_CHECK_SIZEOF(long double, 8)
+# AC_CHECK_SIZEOF(long double, 8)
 # check for 'long long'
-AC_CHECK_SIZEOF(long long, 4)
+# AC_CHECK_SIZEOF(long long, 4)
 
 # check for ssize_t
 AC_CHECK_TYPE(ssize_t, int)
@@ -548,7 +657,6 @@ AC_CHECK_FUNCS( socket \
                 strcasecmp \
                 stricmp \
                 strcmpi \
-                gethostname \
                 gethostbyaddr \
                 gettimeofday \
                 inet_addr \
@@ -565,9 +673,24 @@ AC_CHECK_FUNCS( socket \
                 getpwuid \
                 geteuid \
                 dlopen \
-                utime
+                utime \
+                sigsetjmp \
+                poll
 )
 
+dnl sigsetjmp() might be a macro and no function so if it isn't found already
+dnl we make an extra check here!
+if test "$ac_cv_func_sigsetjmp" != "yes"; then
+  AC_MSG_CHECKING([for sigsetjmp defined as macro])
+  AC_TRY_LINK( [#include <setjmp.h>],
+               [sigjmp_buf jmpenv;
+                sigsetjmp(jmpenv, 1);],
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_SIGSETJMP, 1, [If you have sigsetjmp]),
+               AC_MSG_RESULT(no)
+               )
+fi
+
 dnl removed 'getpass' check on October 26, 2000
 
 if test "$ac_cv_func_select" != "yes"; then
@@ -585,21 +708,86 @@ AC_PATH_PROGS( NROFF, gnroff nroff, ,
   $PATH:/usr/bin/:/usr/local/bin )
 AC_SUBST(NROFF)
 
+
+AC_MSG_CHECKING([CA cert bundle install path])
+
+AC_ARG_WITH(ca-bundle,
+AC_HELP_STRING([--with-ca-bundle=FILE], [File name to install the CA bundle as])
+AC_HELP_STRING([--without-ca-bundle], [Don't install the CA bundle]),
+   [ ca="$withval" ],
+   [
+  if test "x$prefix" != xNONE; then
+    ca="$prefix/share/curl/curl-ca-bundle.crt"
+  else
+    ca="$ac_default_prefix/share/curl/curl-ca-bundle.crt"
+  fi
+   ] )
+
+if test "x$ca" = "xno"; then
+  dnl let's not keep "no" as path name, blank it instead
+  ca=""
+else
+  AC_DEFINE_UNQUOTED(CURL_CA_BUNDLE, "$ca", [CA bundle full path name])
+fi
+
+CURL_CA_BUNDLE="$ca"
+AC_SUBST(CURL_CA_BUNDLE)
+AC_MSG_RESULT([$ca])
+
 AC_PROG_YACC
 
 dnl AC_PATH_PROG( RANLIB, ranlib, /usr/bin/ranlib, 
 dnl   $PATH:/usr/bin/:/usr/local/bin )
 dnl AC_SUBST(RANLIB)
 
+dnl ************************************************************
+dnl lame option to switch on debug options
+dnl
+AC_MSG_CHECKING([whether to enable debug options])
+AC_ARG_ENABLE(debug,
+[  --enable-debug	Enable pedantic debug options
+  --disable-debug	Disable debug options],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+
+    CPPFLAGS="$CPPFLAGS -DMALLOCDEBUG"
+    CFLAGS="$CFLAGS -g" 
+    if test "$GCC" = "yes"; then
+       CFLAGS="$CFLAGS -W -Wall -Wwrite-strings -pedantic -Wundef -Wpointer-arith -Wcast-align -Wnested-externs"
+    fi
+    dnl strip off optimizer flags
+    NEWFLAGS=""
+    for flag in $CFLAGS; do
+      case "$flag" in
+      -O*)
+        dnl echo "cut off $flag"
+        ;;
+      *)
+        NEWFLAGS="$NEWFLAGS $flag"
+        ;;
+      esac
+    done
+    CFLAGS=$NEWFLAGS
+       ;;
+  esac ],
+       AC_MSG_RESULT(no)
+)
+
 AC_CONFIG_FILES([Makefile \
 	   docs/Makefile \
            docs/examples/Makefile \
+           docs/libcurl/Makefile \
 	   include/Makefile \
 	   include/curl/Makefile \
 	   src/Makefile \
            lib/Makefile \
            tests/Makefile \
            tests/data/Makefile \
+           tests/server/Makefile \
+           tests/libtest/Makefile \
 	   packages/Makefile \
 	   packages/Win32/Makefile \
 	   packages/Win32/cygwin/Makefile \
@@ -608,7 +796,8 @@ AC_CONFIG_FILES([Makefile \
 	   packages/Linux/RPM/curl.spec \
 	   packages/Linux/RPM/curl-ssl.spec \
            packages/Solaris/Makefile \
+           packages/EPM/curl.list \
+           packages/EPM/Makefile \
            curl-config
 ])
 AC_OUTPUT
-

curl-config.in

@@ -16,6 +16,8 @@ Usage: curl-config [OPTION]
 
 Available values for OPTION include:
 
+  --ca        ca bundle install path
+  --cc        compiler
   --cflags    pre-processor and compiler flags
   --feature   newline separated list of enabled features
   --help      display this help and exit
@@ -42,6 +44,14 @@ while test $# -gt 0; do
     esac
 
     case "$1" in
+    --ca)
+	echo @CURL_CA_BUNDLE@
+	;;
+
+    --cc)
+	echo @CC@
+	;;
+
     --prefix)
 	echo $prefix
 	;;
@@ -56,6 +66,30 @@ while test $# -gt 0; do
 	if test "@IPV6_ENABLED@" = "1"; then
           echo "IPv6"
         fi
+	if test "@HAVE_LIBZ@" = "1"; then
+          echo "libz"
+        fi
+	if test "@CURL_DISABLE_HTTP@" = "1"; then
+          echo "HTTP-disabled"
+        fi
+	if test "@CURL_DISABLE_FTP@" = "1"; then
+          echo "FTP-disabled"
+        fi
+	if test "@CURL_DISABLE_GOPHER@" = "1"; then
+          echo "GOPHER-disabled"
+        fi
+	if test "@CURL_DISABLE_FILE@" = "1"; then
+          echo "FILE-disabled"
+        fi
+	if test "@CURL_DISABLE_TELNET@" = "1"; then
+          echo "TELNET-disabled"
+        fi
+	if test "@CURL_DISABLE_LDAP@" = "1"; then
+          echo "LDAP-disabled"
+        fi
+	if test "@CURL_DISABLE_DICT@" = "1"; then
+          echo "DICT-disabled"
+        fi
 	;;
 
     --version)
@@ -73,7 +107,8 @@ while test $# -gt 0; do
 	;;
 
     --cflags)
-       	echo -I@includedir@
+       	#echo -I@includedir@
+        echo ""
        	;;
 
     --libs)

docs/.cvsignore

@@ -0,0 +1,5 @@
+Makefile
+Makefile.in
+*html
+*ps
+*pdf

docs/BINDINGS

@@ -0,0 +1,96 @@
+                                  _   _ ____  _     
+                              ___| | | |  _ \| |    
+                             / __| | | | |_) | |    
+                            | (__| |_| |  _ <| |___ 
+                             \___|\___/|_| \_\_____|
+
+                               libcurl bindings
+
+Creative people have written particular bindings or interfaces for various
+environments and programming languages. Using one of these allows you to take
+advantage of curl powers from within your favourite language or system.
+
+This is a list of all known interfaces as of this writing.
+
+The bindings listed below are not part of the curl/libcurl distribution
+archives, but must be downloaded and installed separately.
+
+Basic
+
+  ScriptBasic bindings to libcurl. Writtten by Peter Verhas.
+  http://scriptbasic.com/
+
+C++
+
+  Maintained by Jean-Philippe Barrette-LaPierre.
+  http://curl.haxx.se/libcurl/cplusplus/
+
+Cocoa
+
+  Written by Dan Wood.
+  http://curlhandle.sourceforge.net/
+
+Dylan
+
+  Written by Chris Double.
+  http://dylanlibs.sourceforge.net/
+
+Java
+
+  Written by Daniel Stenberg.
+  http://curl.haxx.se/libcurl/java/
+
+Lua
+
+  Written by Steve Dekorte.
+  http://curl.haxx.se/libcurl/lua/
+
+Object-Pascal
+
+  Free Pascal, Delphi and Kylix binding written by Christophe Espern.
+  http://www.tekool.com/opcurl
+
+Pascal
+
+  Free Pascal, Delphi and Kylix binding written by Jeffrey Pohlmeyer.
+  http://houston.quik.com/jkp/curlpas/
+
+Perl
+
+  Maintained by Cris Bailiff.
+  http://curl.haxx.se/libcurl/perl/
+
+PHP
+
+  Written by Sterling Hughes.
+  http://curl.haxx.se/libcurl/php/
+
+PostgreSQL
+
+  Written by Gian Paolo Ciceri.
+  http://gborg.postgresql.org/project/pgcurl/projdisplay.php
+
+Python
+
+  Written by Kjetil Jacobsen.
+  http://pycurl.sourceforge.net/
+
+Rexx
+
+  Written Mark Hessling. 
+  http://rexxcurl.sourceforge.net/
+
+Ruby
+
+  Written by Hirotaka Matsuyuki. 
+  http://www.d1.dion.ne.jp/~matuyuki/ruby.html
+
+Scheme
+
+  Bigloo binding written by Kirill Lisovsky.
+  http://curl.haxx.se/libcurl/scheme/
+
+Tcl
+
+  Written by Andr<64>s Garc<72>a. 
+  http://personal1.iddeo.es/andresgarci/tclcurl/english/docs.html

docs/BUGS

@@ -8,25 +8,46 @@ $Id$
 BUGS
 
   Curl and libcurl have grown substantially since the beginning. At the time
-  of writing (mid March 2001), there are 23000 lines of source code, and by
+  of writing (end of April 2002), there are 32000 lines of source code, and by
   the time you read this it has probably grown even more.
 
   Of course there are lots of bugs left. And lots of misfeatures.
 
   To help us make curl the stable and solid product we want it to be, we need
-  bug reports and bug fixes. If you can't fix a bug yourself and submit a fix
-  for it, try to report an as detailed report as possible to the curl mailing
-  list to allow one of us to have a go at a solution. You should also post
-  your bug/problem at curl's bug tracking system over at
+  bug reports and bug fixes.
+
+WHERE TO REPORT
+
+  If you can't fix a bug yourself and submit a fix for it, try to report an as
+  detailed report as possible to the curl mailing list to allow one of us to
+  have a go at a solution. You should also post your bug/problem at curl's bug
+  tracking system over at
 
         http://sourceforge.net/bugs/?group_id=976
 
+  (but please read the section below first before doing that)
+
+WHAT TO REPORT
+
   When reporting a bug, you should include information that will help us
-  understand what's wrong, what you expected to happen and how to repeat the
-  bad behaviour. You therefore need to supply your operating system's name and
-  version number (uname -a under a unix is fine), what version of curl you're
-  using (curl -V is fine), what URL you were working with and anything else
-  you think matters.
+  understand what's wrong what you expected to happen and how to repeat the
+  bad behavior. You therefore need to tell us:
+
+   - your operating system's name and version number (uname -a under a unix
+     is fine)
+   - what version of curl you're using (curl -V is fine)
+   - what URL you were working with (if possible), at least which protocol
+
+  and anything and everything else you think matters. Tell us what you
+  expected to happen, tell use what did happen, tell us how you could make it
+  work another way. Dig around, try out, test. Then include all the tiny bits
+  and pieces in your report. You will benefit from this yourself, as it will
+  enable us to help you quicker and more accurately.
+
+  Since curl deals with networks, it often helps us if you include a protocol
+  debug dump with your bug report. The output you get by using the -v
+  flag. Usually, you also get more info by using -i so that is likely to be
+  useful when reporting bugs as well.
 
   If curl crashed, causing a core dump (in unix), there is hardly any use to
   send that huge file to anyone of us. Unless we have an exact same system
@@ -36,8 +57,7 @@ BUGS
   The address and how to subscribe to the mailing list is detailed in the
   MANUAL file.
 
-  How To Get A Stack Trace
-  ========================
+HOW TO GET A STACK TRACE
 
   First, you must make sure that you compile all sources with -g and that you
   don't 'strip' the final executable. Try to avoid optimizing the code as

docs/CONTRIBUTE

@@ -6,15 +6,16 @@
 
 To Think About When Contributing Source Code
 
- This document is intended to offer some guidelines that can be useful to keep
- in mind when you decide to write a contribution to the project. This concerns
+ This document is intended to offer some simple guidelines that can be useful
+ to keep in mind when you decide to contribute to the project. This concerns
  new features as well as corrections to existing flaws or bugs.
 
 Join the Community
 
  Skip over to http://curl.haxx.se/mail/ and join the appropriate mailing
  list(s).  Read up on details before you post questions. Read this file before
- you start sending patches!
+ you start sending patches! We prefer patches and discussions being held on
+ the mailing list(s), not sent to individuals.
 
 The License Issue
 
@@ -29,9 +30,9 @@ The License Issue
 
 What To Read
 
- Source code, the man pages, the INTERALS document, the TODO, the most recent
+ Source code, the man pages, the INTERNALS document, the TODO, the most recent
  CHANGES. Just lurking on the libcurl mailing list is gonna give you a lot of
- insights on what's going on right now.
+ insights on what's going on right now. Asking there is a good idea too.
 
 Naming
 
@@ -39,26 +40,32 @@ Naming
  names. It doesn't necessarily have to mean that you should use the same as in
  other places of the code, just that the names should be logical,
  understandable and be named according to what they're used for. File-local
- functions should be made static.
+ functions should be made static. We like lower case names.
+
+ See the INTERNALS document on how we name non-exported library-global
+ symbols.
 
 Indenting
 
  Please try using the same indenting levels and bracing method as all the
  other code already does. It makes the source code a lot easier to follow if
  all of it is written using the same style. We don't ask you to like it, we
- just ask you to follow the tradition! ;-)
+ just ask you to follow the tradition! ;-) This mainly means: 2-level indents,
+ using spaces only (no tabs) and having the opening brace ({) on the same line
+ as the if() or while().
 
 Commenting
 
- Comment your source code extensively. Commented code is quality code and
- enables future modifications much more. Uncommented code much more risk being
+ Comment your source code extensively using C comments (/* comment */), DO NOT
+ use C++ comments (// this style). Commented code is quality code and enables
+ future modifications much more. Uncommented code much more risk being
  completely replaced when someone wants to extend things, since other persons'
  source code can get quite hard to read.
 
 General Style
 
  Keep your functions small. If they're small you avoid a lot of mistakes and
- you don't accidentally mix up variables.
+ you don't accidentally mix up variables etc.
 
 Non-clobbering All Over
 
@@ -69,7 +76,14 @@ Non-clobbering All Over
  functionality, try writing it in a new source file. If you fix bugs, try to
  fix one bug at a time and send them as separate patches.
 
-Separate Patches Doing Different Things
+Platform Dependent Code
+
+ Use #ifdef HAVE_FEATURE to do conditional code. We avoid checking for
+ particular operating systems or hardware in the #ifdef lines. The
+ HAVE_FEATURE shall be generated by the configure script for unix-like systems
+ and they are hard-coded in the config-[system].h files for the others.
+
+Separate Patches
 
  It is annoying when you get a huge patch from someone that is said to fix 511
  odd problems, but discussions and opinions don't agree with 510 of them - or
@@ -94,6 +108,10 @@ Document
  small description of your fix or your new features with every contribution so
  that it can be swiftly added to the package documentation.
 
+ The documentation is always made in man pages (nroff formatted) or plain
+ ASCII files. All HTML files on the web site and in the release archives are
+ generated from the nroff/ASCII versions.
+
 Write Access to CVS Repository
 
  If you are a frequent contributor, or have another good reason, you can of
@@ -111,3 +129,21 @@ Test Cases
  in the test suite. Every feature that is added should get at least one valid
  test case that verifies that it works as documented. If every submitter also
  post a few test cases, it won't end up as a heavy burden on a single person!
+
+How To Make a Patch
+
+ Keep a copy of the unmodified curl sources. Make your changes in a separate
+ source tree. When you think you have something that you want to offer the
+ curl community, use GNU diff to generate patches.
+
+ If you have modified a single file, try something like:
+
+     diff -u undmodified-file.c my-changed-one.c > my-fixes.diff
+
+ If you have modified several files, possibly in different directories, you
+ can use diff recursively:
+
+     diff -ur curl-original-dir curl-modfied-sources-dir > my-fixes.diff
+
+ GNU diff exists for virtually all platforms, including all kinds of unixes
+ and Windows.

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: December 21, 2001 (http://curl.haxx.se/docs/faq.shtml)
+Updated: January 13, 2003 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _     
                               ___| | | |  _ \| |    
                              / __| | | | |_) | |    
@@ -15,6 +15,7 @@ FAQ
   1.5 Who makes cURL?
   1.6 What do you get for making cURL?
   1.7 What about CURL from curl.com?
+  1.8 I have a problem who do I mail?
 
  2. Install Related Problems
   2.1 configure doesn't find OpenSSL even when it is installed
@@ -30,13 +31,15 @@ FAQ
   3.3 Why doesn't my posting using -F work?
   3.4 How do I tell curl to run custom FTP commands?
   3.5 How can I disable the Pragma: nocache header?
-  3.6 Does curl support javascript, ASP, XML, XHTML or HTML version Y?
+  3.6 Does curl support ASP, XML, XHTML or HTML version Y?
   3.7 Can I use curl to delete/rename a file through FTP?
   3.8 How do I tell curl to follow HTTP redirects?
-  3.9 How do I use curl in my favourite programming language?
+  3.9 How do I use curl in my favorite programming language?
   3.10 What about SOAP, WebDAV, XML-RPC or similar protocols over HTTP?
   3.11 How do I POST with a different Content-Type?
   3.12 Why do FTP specific features over HTTP proxy fail?
+  3.13 Why does my single/double quotes fail?
+  3.14 Does curl support javascript or pac (automated proxy config)?
 
  4. Running Problems
   4.1 Problems connecting to SSL servers.
@@ -54,6 +57,9 @@ FAQ
   4.7 How do I keep user names and passwords secret in Curl command lines?
   4.8 I found a bug!
   4.9 Curl can't authenticate to the server that requires NTLM?
+  4.10 My HTTP request using HEAD, PUT or DELETE doesn't work!
+  4.11 Why does my HTTP range requests return the full document?
+  4.12 Why do I get "certificate verify failed" ?
 
  5. libcurl Issues
   5.1 Is libcurl thread-safe?
@@ -62,6 +68,7 @@ FAQ
   5.4 Does libcurl do Winsock initing on win32 systems?
   5.5 Does CURLOPT_FILE and CURLOPT_INFILE work on win32 ?
   5.6 What about Keep-Alive or persistent connections?
+  5.7 Link errors when building libcurl on Windows!
 
  6. License Issues
   6.1 I have a GPL program, can I use the libcurl library?
@@ -80,7 +87,9 @@ FAQ
   cURL (or simply just 'curl') is a command line tool for getting or sending
   files using URL syntax. The name is a play on 'Client for URLs', originally
   with URL spelled in uppercase to make it obvious it deals with URLs. The
-  fact it can also be pronounced 'see URL' also helped.
+  fact it can also be pronounced 'see URL' also helped, it works as an
+  abbrivation for "Client URL Request Library" or why not the recursive
+  version: "Curl is a URL Request Library".
 
   Curl supports a range of common Internet protocols, currently including
   HTTP, HTTPS, FTP, FTPS, GOPHER, LDAP, DICT, TELNET and FILE.
@@ -150,10 +159,10 @@ FAQ
   1.5 Who makes cURL?
 
   cURL and libcurl are not made by any single individual. Sure, Daniel
-  Stenberg writes the major parts, but various people's submissions are
-  important and crucial. Anyone can post their changes and improvements and
-  have them inserted in the main sources (of course on the condition that
-  developers agree on that the fixes are good).
+  Stenberg writes the major parts, but other persons' submissions are
+  important and crucial. Anyone can contribute and post their changes and
+  improvements and have them inserted in the main sources (of course on the
+  condition that developers agree on that the fixes are good).
 
   The list of contributors in the docs/THANKS file is only a small part of all
   the people that every day provide us with bug reports, suggestions, ideas
@@ -163,9 +172,8 @@ FAQ
 
   1.6 What do you get for making cURL?
 
-  Project cURL is entirely free and open, without any commercial interests or
-  money involved. No person gets paid in any way for developing curl. We all
-  do this voluntarily on our spare time.
+  Project cURL is entirely free and open. No person gets paid for developing
+  curl. We do this voluntarily on our spare time.
 
   We get some help from companies. Contactor Data hosts the curl web site and
   the main mailing list, Haxx owns the curl web site's domain and
@@ -175,8 +183,8 @@ FAQ
   If you want to support our project with a donation or similar, one way of
   doing that would be to buy "gift certificates" at useful online shopping
   sites, such as amazon.com or thinkgeek.com. Another way would be to sponsor
-  us through a banner-program or by simply helping us coding, documenting,
-  testing etc.
+  us through a banner-program or even better: by helping us coding,
+  documenting, testing etc.
 
   1.7 What about CURL from curl.com?
 
@@ -193,6 +201,21 @@ FAQ
   We recognize that we will be living in parallel with curl.com and wish them
   every success.
 
+  1.8 I have a problem who do I mail?
+
+  Please do not attempt to mail any single individual unless you really need
+  to. Keep curl-related questions on a suitable mailing list. All available
+  mailing lists are listed in the MANUAL document and online at
+  http://curl.haxx.se/mail/
+
+  Keeping curl-related questions and discussions on mailing lists allows others
+  to join in and help, to share their ideas, contribute their suggestions and
+  spread their wisdom. Keeping discussions on public mailing lists also allows
+  for others to learn from this (both current and future users thanks to the
+  web based archives of the mailing lists), thus saving us from having to
+  repeat ourselves even more. Thanks for respecting this.
+
+
 2. Install Related Problems
 
   2.1. configure doesn't find OpenSSL even when it is installed
@@ -252,8 +275,8 @@ FAQ
 
   2.4. Does cURL support Socks (RFC 1928) ?
 
-  No. Nobody has wanted it that badly yet. We appreciate patches that bring
-  this functionality.
+  There is limited support for SOCKS5 for curl built with IPv6 support
+  disabled.
 
 
 3. Usage problems
@@ -308,16 +331,14 @@ FAQ
   the -H/--header option. By adding a header with empty contents you safely
   disable that one. Use -H "Pragma:" to disable that specific header.
 
-  3.6. Does curl support javascript, ASP, XML, XHTML or HTML version Y?
+  3.6. Does curl support ASP, XML, XHTML or HTML version Y?
 
   To curl, all contents are alike. It doesn't matter how the page was
   generated. It may be ASP, PHP, Perl, shell-script, SSI or plain
   HTML-files. There's no difference to curl and it doesn't even know what kind
   of language that generated the page.
 
-  Javascript is slightly different since that is code embedded in the HTML
-  that is sent for the client to interpret and curl has no javascript
-  interpreter.
+  See also item 3.14 regarding javascript.
 
   3.7. Can I use curl to delete/rename a file through FTP?
 
@@ -335,17 +356,13 @@ FAQ
 
      curl -L http://redirector.com
 
-  3.9 How do I use curl in my favourite programming language?
+  3.9 How do I use curl in my favorite programming language?
 
   There exist many language interfaces/bindings for curl that integrates it
   better with various languages. If you are fluid in a script language, you
   may very well opt to use such an interface instead of using the command line
   tool.
 
-  At the time of writing, there are bindings for the five language mentioned
-  above, but chances are there are even more by the time you read this. Or you
-  may be able you write your own wrapper for a not-yet supported language!
-
   Find out more about which languages that support curl directly, and how to
   install and use them, in the libcurl section of the curl web site:
 
@@ -376,7 +393,7 @@ FAQ
 
   Because when you use a HTTP proxy, the protocol spoken on the network will
   be HTTP, even if you specify a FTP URL. This effectively means that you
-  normally can't use FTP specific features such as ftp upload and ftp quote
+  normally can't use FTP specific features such as FTP upload and FTP quote
   etc.
 
   There is one exception to this rule, and that is if you can "tunnel through"
@@ -384,6 +401,54 @@ FAQ
   and is generally not available as proxy admins usually disable tunneling to
   other ports than 443 (which is used for HTTPS access through proxies).
 
+  3.13 Why does my single/double quotes fail?
+
+  To specify a command line option that includes spaces, you might need to
+  put the entire option within quotes. Like in:
+
+   curl -d " with spaces " url.com
+  
+  or perhaps
+
+   curl -d ' with spaces ' url.com
+
+  Exactly what kind of quotes and how to do this is entirely up to the shell
+  or command line interpreter that you are using. For most unix shells, you
+  can more or less pick either single (') or double (") quotes. For
+  Windows/DOS prompts I believe you're forced to use double (") quotes.
+
+  Please study the documentation for your particular environment. Examples in
+  the curl docs will use a mix of both these ones as shown above. You must
+  adjust them to work in your environment.
+
+  Remember that curl works and runs on more operating systems than most single
+  individuals have ever tried.
+
+  3.14 Does curl support javascript or pac (automated proxy config)?
+
+  Many web pages do magic stuff using embedded javascript. Curl and libcurl
+  have no built-in support for that, so it will be treated just like any other
+  contents.
+
+  .pac files are a netscape invention and are sometimes used by organizations
+  to allow them to differentiate which proxies to use. The .pac contents is
+  just a javascript program that gets invoked by the browser and that returns
+  the name of the proxy to connect to. Since curl doesn't support javascript,
+  it can't support .pac proxy configuration either.
+
+  Some work-arounds usually suggested to overcome this javascript dependency:
+
+    - Depending on the javascript complexity, write up a script that
+      translates it to another language and execute that.
+
+    - Read the javascript code and rewrite the same logic in another language.
+
+    - Implement a javascript interpreted, people have successfully used the
+      Mozilla javascript engine in the past.
+
+    - Ask your admins to stop this, for a static proxy setup or similar.
+
+
 4. Running Problems
 
   4.1. Problems connecting to SSL servers.
@@ -412,11 +477,12 @@ FAQ
 
      curl 'http://www.altavista.com/cgi-bin/query?text=yes&q=curl'
 
-  In win32, the standard DOS shell treats the %-letter specially and you may
-  need to quote the string properly when % is used in it.
+  In Windows, the standard DOS shell treats the %-letter specially and you
+  need to use TWO %-letters for each single one you want to use in the URL.
 
   Also note that if you want the literal %-letter to be part of the data you
-  pass in a POST using -d/--data you must encode it as '%25'.
+  pass in a POST using -d/--data you must encode it as '%25' (which then also
+  needs the %-letter doubled on Windows machines).
 
   4.3. How can I use {, }, [ or ] to specify multiple URLs?
 
@@ -475,7 +541,7 @@ FAQ
 
     4.5.6 "301 Moved Permanently"
  
-    If you get this return code and an HTML outpt similar to this:
+    If you get this return code and an HTML output similar to this:
 
        <H1>Moved Permanently</H1> The document has moved <A
        HREF="http://same_url_now_with_a_trailing_slash/">here</A>.
@@ -517,12 +583,8 @@ FAQ
   particular platform, try contacting the person who built the package/archive
   you have.
 
-  If there is a bug, post a bug report in the Curl Bug Track System over at
-  http://sourceforge.net/bugs/?group_id=976
-
-  Always include as many details you can think of, including curl version,
-  operating system name and version and complete instructions how to repeat
-  the bug.
+  If there is a bug, read the BUGS document first. Then report it as described
+  in there.
 
   4.9. Curl can't authenticate to the server that requires NTLM?
 
@@ -530,6 +592,46 @@ FAQ
   currently support that. Proprietary formats are evil. You should not use
   such ones.
 
+  4.10 My HTTP request using HEAD, PUT or DELETE doesn't work!
+
+  Many web servers allow or demand that the administrator configures the
+  server properly for these requests to work on the web server.
+
+  Some servers seem to support HEAD only on certain kinds of URLs.
+
+  To fully grasp this, try the documentation for the particular server
+  software you're trying to interact with. This is not anything curl can do
+  anything about.
+
+  4.11 Why does my HTTP range requests return the full document?
+
+  Because the range may not be supported by the server, or the server may
+  choose to ignore it and return the full document anyway.
+
+  4.12 Why do I get "certificate verify failed" ?
+
+  You invoke curl 7.10 or later to communicate on a https:// URL and get an
+  error back looking something similar to this:
+
+      curl: (35) SSL: error:14090086:SSL routines: 
+      SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
+
+  Then it means that curl couldn't verify that the server's certificate was
+  good. Curl verifies the certificate using the CA cert bundle that comes with
+  the curl installation.
+
+  To disable the verification (which makes it act like curl did before 7.10),
+  use -k. This does however enable man-in-the-middle attacks.
+
+  If you get this failure but are having a CA cert bundle installed and used,
+  the server's certificate is not signed by one of the CA's in the bundle. It
+  might for example be self-signed. You then correct this problem by obtaining
+  a valid CA cert for the server. Or again, decrease the security by disabling
+  this check.
+
+  Details are also in the SSLCERTS file in the release archives, found online
+  here: http://curl.haxx.se/lxr/source/SSLCERTS
+
 5. libcurl Issues
 
   5.1. Is libcurl thread-safe?
@@ -615,14 +717,25 @@ FAQ
 
   Previous versions had no persistent connection support.
 
+  5.7 Link errors when building libcurl on Windows!
+
+  You need to make sure that your project, and all the libraries (both static
+  and dynamic) that it links against, are compiled/linked against the same run
+  time library.
+
+  This is determined by the /MD, /ML, /MT (and their corresponding /M?d)
+  options to the command line compiler. /MD (linking against MSVCRT dll) seems
+  to be the most commonly used option.
+
+  (Provided by Andrew Francis)
+
+
 6. License Issues
 
-  Curl and libcurl are released under a MIT/X derivate license *or* the MPL,
-  the Mozilla Public License. To get a really good answer to your license
-  conflict questions, you should study the MPL and MIT/X licenses and the
-  license you are about to use and check for clashes yourself. This section is
-  just a brief summary for the cases we get the most questions. (Parts of this
-  section was much enhanced by Bjorn Reese.)
+  Curl and libcurl are released under a MIT/X derivate license. The license is
+  very liberal and should not impose a problem for your project. This section
+  is just a brief summary for the cases we get the most questions. (Parts of
+  this section was much enhanced by Bjorn Reese.)
 
   6.1. I have a GPL program, can I use the libcurl library?
 

docs/HISTORY

@@ -0,0 +1,113 @@
+                                  _   _ ____  _     
+                              ___| | | |  _ \| |    
+                             / __| | | | |_) | |    
+                            | (__| |_| |  _ <| |___ 
+                             \___|\___/|_| \_\_____|
+
+                          How cURL Became Like This
+
+
+In the second half of 1997, Daniel Stenberg came up with the idea to make
+currency-exchange calculations available to Internet Relay Chat (IRC)
+users. All the necessary data are published on the Web; he just needed to
+automate their retrieval.
+
+Daniel simply adopted an existing command-line open-source tool, httpget, that
+Brazilian Rafael Sagula had written. After a few minor adjustments, it did
+just what he needed.
+
+Soon, he found currencies on a GOPHER site, so support for that had to go in,
+and not before long FTP download support was added as well. The name of the
+project was changed to urlget to better fit what it actually did now, since
+the http-only days were already passed.
+
+The project slowly grew bigger. When upload capabilities were added and the
+name once again was misleading, a second name change was made and on March 20,
+1998 curl 4 was released. (The version numbering from the previous names were
+kept.)
+
+(Unrelated to this project a company called Curl Corporation filed a US
+trademark on the name "CURL" on May 18 1998. That company had then already
+registered the curl.com domain back in November of the previous year. All this
+was much later brought into the lights.)
+
+SSL support was added, powered by the SSLeay library.
+
+August 1998, added project curl to freshmeat.net.
+
+October 1998, with the curl 4.9 release and the introduction of cookie
+support, curl was no longer released under the GPL license. Now we're at 4000
+lines of code, we switched over to the MPL license to restrict the effects of
+"copyleft".
+
+November 1998, configure script and reported successful compiles on several
+major operating systems. The never-quite-understood -F option was added and
+curl could now simulate quite a lot of a browser.
+
+Curl 5 was released in December 1998 and introduced the first ever curl man
+page. People started making Linux RPM packages out of it.
+
+January 1999, DICT support added.
+
+OpenSSL took over where SSLeay was abandoned.
+
+May 1999, first Debian package.
+
+August 1999, LDAP:// and FILE:// support added. The curl web site gets 1300
+visits daily.
+
+Released curl 6.0 in September. 15000 lines of code.
+
+December 28 1999, added the project on Sourceforge and started using its
+services for managing the project.
+
+Spring 2000, major internal overhaul to provide a suitable library interface.
+The first non-beta release was named 7.1 and arrived in August. This offered
+the easy interface and turned out to be the beginning of actually getting
+other software and programs to get based on and powered by libcurl. Almost
+20000 lines of code.
+
+August 2000, the curl web site gets 4000 visits daily.
+
+The PHP guys adopted libcurl already the same month, when the first ever third
+party libcurl binding showed up. CURL has been a supported module in PHP since
+the release of PHP 4.0.2. This would soon get followers. More than 16
+different bindings exist at the time of this writing.
+
+September 2000, kerberos4 support was added.
+
+In November 2000 started the work on a test suite for curl. It was later
+re-written from scratch again.
+
+January 2001, Daniel released curl 7.5.2 under a new license again: MIT (or
+MPL). The MIT license is extremely liberal and can be used combined with GPL
+in other projects. This would finally put an end to the "complaints" from
+people involved in GPLed projects that previously were prohibited from using
+libcurl while it was released under MPL only. (Due to the fact that MPL is
+deemed "GPL incompatible".)
+
+curl supports HTTP 1.1 starting with the release of 7.7, March 22 2001. This
+also introduced libcurl's ability to do persistent connections. 24000 lines of
+code.
+
+August 2001. curl is bundled in Mac OS X, 10.1. It was already becoming more
+and more of a standard utility of Linux distributions and a regular in the BSD
+ports collections. The curl web site gets 8000 visits daily. Curl Corporation
+contacted Daniel to discuss "the name issue". After Daniel's reply, they have
+never since got in touch again.
+
+September 2001, libcurl 7.9 introduces cookie jar and curl_formadd(). During
+the forthcoming 7.9.x releases, we introduced the multi interface slowly and
+without much whistles.
+
+June 2002, the curl web site gets 13000 visits daily. curl and libcurl is
+35000 lines of code. Reported successful compiles on more than 40 combinations
+of CPUs and operating systems.
+
+To estimate number of users of the curl tool or libcurl library is next to
+impossible. Around 5000 downloaded packages each week from the main site gives
+a hint, but the packages are mirrored extensively, bundled with numerous OS
+distributions and otherwise retrieved as part of other software.
+
+September 2002, with the release of curl 7.10 it is released under the MIT
+license only.

docs/INSTALL

@@ -28,11 +28,22 @@ UNIX
 
    You probably need to be root when doing the last command.
 
+   If you have checked out the sources from the CVS repository, read the
+   CVS-INFO on how to proceed.
+
    If you want to install curl in a different file hierarchy than /usr/local,
    you need to specify that already when running configure:
 
         ./configure --prefix=/path/to/curl/tree
 
+   If you happen to have write permission in that directory, you can do 'make
+   install' without being root. An example of this would be to make a local
+   install in your own home directory:
+
+        ./configure --prefix=$HOME
+        make
+        make install
+
    The configure script always tries to find a working SSL library unless
    explicitly told not to. If you have OpenSSL installed in the default search
    path for your compiler/linker, you don't need to do anything special. If
@@ -71,33 +82,6 @@ UNIX
      LIBS=-lRSAglue -lrsaref
      (as suggested by Doug Kaufman)
 
-   KNOWN PROBLEMS (these ones should not happen anymore)
-
-     If you happen to have autoconf installed, but a version older than 2.12
-     you will get into trouble. Then you can still build curl by issuing these
-     commands (note that this requires curl to be built staticly): (from Ralph
-     Beckmann)
-
-       ./configure [...]
-       cd lib; make; cd ..
-       cd src; make; cd ..
-       cp src/curl elsewhere/bin/
-
-     As suggested by David West, you can make a faked version of autoconf and
-     autoheader:
-
-       ----start of autoconf----
-       #!/bin/bash
-       #fake autoconf for building curl
-       if [ "$1" = "--version" ] then
-         echo "Autoconf version 2.13"
-       fi
-       ----end of autoconf----
-
-     Then make autoheader a symbolic link to the same script and make sure
-     they're executable and set to appear in the path *BEFORE* the actual (but
-     obsolete) autoconf and autoheader scripts.
-
    MORE OPTIONS
 
      To force configure to use the standard cc compiler if both cc and gcc are
@@ -178,9 +162,9 @@ Win32
         For VC++ 6, there's an included Makefile.vc6 that should be possible
         to use out-of-the-box.
 
-        Microsoft note: add /Zm200 to the compiler options to increase the 
-		compiler's memory allocation limit, as the hugehelp.c won't compile
-		due to "too long puts string".
+        Microsoft note: add /Zm200 to the compiler options to increase the
+        compiler's memory allocation limit, as the hugehelp.c won't compile
+        due to "too long puts string".
 
 
    With SSL:
@@ -201,17 +185,34 @@ Win32
 
       Microsoft command line style
       ----------------------------
+
         Please read the OpenSSL documentation on how to compile and install
-        the OpenSSL library.  This generates the libeay32.dll and ssleay32.dll
-        files.
+        the OpenSSL libraries.  The build process of OpenSSL generates the
+        libeay32.dll and ssleay32.dll files in the out32dll subdirectory in
+        the OpenSSL home directory.  OpenSSL static libraries (libeay32.lib,
+        ssleay32.lib, RSAglue.lib) are created in the out32 subdirectory.
 
-        Run the 'vcvars32.bat' file to get the proper environment variables
-        set. Edit the makefile.vc6 in the lib directory and define
-        OPENSSL_PATH.  Set the location of the OpenSSL library and run 'nmake
-        vc-ssl' in the root directory.
+        Run the 'vcvars32.bat' file to get a proper environment. The
+        vcvars32.bat file is part of the Microsoft development environment and
+        you may find it in 'C:\Program Files\Microsoft Visual Studio\vc98\bin'
+        provided that you installed Visual C/C++ 6 in the default directory.
 
-        The vcvars32.bat file is part of the Microsoft development
-        environment.
+        Before running nmake define the OPENSSL_PATH environment variable with
+        the root/base directory of OpenSSL, for example:
+
+          set OPENSSL_PATH=c:\openssl-0.9.6b
+
+        Then run 'nmake vc-ssl' or 'nmake vc-ssl-dll' in curl's root
+        directory.  'nmake vc-ssl' will create a libcurl static and dynamic
+        libraries in the lib subdirectory, as well as a statically linked
+        version of curl.exe in the src subdirectory.  This statically linked
+        version is a standalone executable not requiring any DLL at
+        runtime. This make method requires that you have the static OpenSSL
+        libraries available in OpenSSL's out32 subdirectory.
+	'nmake vc-ssl-dll' creates the libcurl dynamic library and
+	links curl.exe against libcurl and OpenSSL dynamically.
+	This executable requires libcurl.dll and the OpenSSL DLLs
+	at runtime.
 
       Microsoft / Borland style
       -------------------------
@@ -219,6 +220,30 @@ Win32
         project properties to use the SSL include path, link with the SSL libs
         and define the USE_SSLEAY symbol.
 
+   Disabling Specific Protocols:
+
+      The configure utility, unfortunately, is not available for the Windows
+      environment, therefore, you cannot use the various disable-protocol
+      options of the configure utility on this platform.
+
+      However, you can use the following defines to disable specific
+      protocols:
+
+      HTTP_ONLY             disables all protocols except HTTP
+      CURL_DISABLE_FTP      disables FTP
+      CURL_DISABLE_LDAP     disables LDAP
+      CURL_DISABLE_TELNET   disables TELNET
+      CURL_DISABLE_DICT     disables DICT
+      CURL_DISABLE_FILE     disables FILE
+      CURL_DISABLE_GOPHER   disables GOPHER
+
+      If you want to set any of these defines you have the following
+      possibilities:
+
+      - Modify lib/setup.h
+      - Modify lib/Makefile.vc6
+      - Add defines to Project/Settings/C/C++/General/Preprocessor Definitions
+        in the curllib.dsw/curllib.dsp Visual C++ 6 IDE project.
 
 IBM OS/2
 ========
@@ -322,6 +347,20 @@ VMS
    13-jul-2001
    N. Baggus
 
+QNX
+===
+   (This section was graciously brought to us by David Bentham)
+
+   As QNX is targetted for resource constrained environments, the QNX headers
+   set conservative limits. This includes the FD_SETSIZE macro, set by default
+   to 32. Socket descriptors returned within the CURL library may exceed this,
+   resulting in memory faults/SIGSEGV crashes when passed into select(..)
+   calls using fd_set macros.
+
+   A good all-round solution to this is to override the default when building
+   libcurl, by overriding CFLAGS during configure, example
+   #  configure CFLAGS='-DFD_SETSIZE=64 -g -O2'
+
 CROSS COMPILE
 =============
 
@@ -364,20 +403,23 @@ CROSS COMPILE
 PORTS
 =====
    This is a probably incomplete list of known hardware and operating systems
-   that curl has been compiled for. If you know one system curl compiles and
+   that curl has been compiled for. If you know a system curl compiles and
    runs on, that isn't listed, please let us know!
 
         - Alpha DEC OSF 4
         - Alpha Digital UNIX v3.2
-        - Alpha FreeBSD 4.1
-        - Alpha Linux 2.2.16
+        - Alpha FreeBSD 4.1, 4.5
+        - Alpha Linux 2.2, 2.4
+        - Alpha NetBSD 1.5.2
+        - Alpha OpenBSD 3.0
         - Alpha OpenVMS V7.1-1H2
         - Alpha Tru64 v5.0 5.1
         - HP-PA HP-UX 9.X 10.X 11.X
         - HP-PA Linux
         - MIPS IRIX 6.2, 6.5
         - MIPS Linux
-        - Power AIX 4.2, 4.3.1, 4.3.2
+        - Pocket PC/Win CE 3.0
+        - Power AIX 4.2, 4.3.1, 4.3.2, 5.1
         - PowerPC Darwin 1.0
         - PowerPC Linux
         - PowerPC Mac OS 9
@@ -400,6 +442,7 @@ PORTS
         - i386 SCO unix
         - i386 Solaris 2.7
         - i386 Windows 95, 98, ME, NT, 2000
+        - i386 QNX 6
         - ia64 Linux 2.3.99
         - m68k AmigaOS 3
         - m68k Linux

docs/INTERNALS

@@ -54,7 +54,7 @@ Windows vs Unix
  Inside the source code, We make an effort to avoid '#ifdef [Your OS]'. All
  conditionals that deal with features *should* instead be in the format
  '#ifdef HAVE_THAT_WEIRD_FUNCTION'. Since Windows can't run configure scripts,
- we maintain two config-win32.h files (one in / and one in src/) that are
+ we maintain two config-win32.h files (one in lib/ and one in src/) that are
  supposed to look exactly as a config.h file would have looked like on a
  Windows machine!
 
@@ -69,10 +69,10 @@ Library
  rather small and easy-to-follow. All the ones prefixed with 'curl_easy' are
  put in the lib/easy.c file.
 
- Starting with libcurl 7.8, curl_global_init_() and curl_global_cleanup() were
- introduced. They should be called by the application to initialize and clean
- up global stuff in the library. As of today, they just do the global SSL
- initing if SSL is enabled. libcurl itself has no "global" scope.
+ curl_global_init_() and curl_global_cleanup() should be called by the
+ application to initialize and clean up global stuff in the library. As of
+ today, it can handle the global SSL initing if SSL is enabled and it can init
+ the socket layer on windows machines. libcurl itself has no "global" scope.
 
  All printf()-style functions use the supplied clones in lib/mprintf.c. This
  makes sure we stay absolutely platform independent.

docs/KNOWN_BUGS

@@ -0,0 +1,86 @@
+These are problems known to exist at the time of this release. Feel free to
+join in and help us correct one or more of these! Also be sure to check the
+changelog of the current development status, as one or more of these problems
+may have been fixed since this was written!
+
+* Running 'make test' on Mac OS X gives 4 errors. This seems to be related
+  to some kind of libtool problem:
+  http://curl.haxx.se/mail/archive-2002-03/0029.html and
+  http://curl.haxx.se/mail/archive-2002-03/0033.html
+
+* libcurl does not deal nicely with files larger than 2GB
+
+* GOPHER transfers seem broken
+
+* configure --disable-http is not fully supported. All other protocols seem
+  to work to disable.
+
+* If a HTTP server responds to a HEAD request and includes a body (thus
+  violating the RFC2616), curl won't wait to read the response but just stop
+  reading and return back. If a second request (let's assume a GET) is then
+  immediately made to the same server again, the connection will be re-used
+  fine of course, and the second request will be sent off but when the
+  response is to get read, the previous response-body is what curl will read
+  and havoc is what happens.
+  More details on this is found in this libcurl mailing list thread:
+  http://curl.haxx.se/mail/lib-2002-08/0000.html
+
+------------------------------------------------------------------------------
+
+Q: My program blows up when I run lots of curl_easy_perform() calls on a
+single thread
+Q: My program dies when a single thread re-enters the win32 select() call
+via curl_easy_perform()
+Q: --- add your own flavour here ---
+
+Single Threaded Re-Entracy
+--------------------------
+
+There is a glitch / trick to using cURL on Win32 related to re-entrancy.
+This experience was gained on verion 7.9.4 using Windows NT SP3 in a banking
+environment (just in case you wanted to know).
+
+If you have already called curl_easy_perform(), and *somehow* you cause your
+single thread of execution to make another call to curl_easy_perform() - the
+windows socket() call used to create a new socket for the second connection
+can return with 10044 / 10043 error codes.
+
+The WSA errors we experienced are:
+WSAEPROTONOSUPPORT 
+(10043) 
+Protocol not supported. 
+The requested protocol has not been configured into the system, or no
+implementation for it exists. For example, a socket call requests a
+SOCK_DGRAM socket, but specifies a stream protocol. 
+
+WSAESOCKTNOSUPPORT 
+(10044) 
+Socket type not supported. 
+The support for the specified socket type does not exist in this address
+family. For example, the optional type SOCK_RAW might be selected in a
+socket call, and the implementation does not support SOCK_RAW sockets at
+all. 
+
+We have experienced this by creating a timer that ticks every 20ms, and on
+the tick making a curl_easy_perform() call.  The call usually completed in
+about 300ms.  And we expected (before this test) that the timer would NOT be
+fired during a call to curl_easy_perform(), howvever, while the first
+curl_easy_perform() is running a tick *is* fired by the windows API somehow,
+and we then call curl_easy_perform() again - thus single threaded
+re-entrancy is achieved.
+
+Notes:
+* We made sure that a new CURL structure was being used for each
+curl_easy_perform() request, and that the curl_global_init() had been called
+beforehand.  
+* I'm happy to answer any questions about this problem to try to track it
+down.
+* Once the socket() call started failing, there is no hope - it never works
+again.
+* Slowing the timer down to give each request enough time to complete solves
+this problem completely.
+
+If anyone has the source code to the WinNT implementation of socket() and
+can figure out WHY this can occur, more tracing can be performed.
+
+        John Clayton <John.Clayton at barclayscapital.com>

docs/MANUAL

@@ -246,25 +246,25 @@ POST (HTTP)
   -F accepts parameters like -F "name=contents". If you want the contents to
   be read from a file, use <@filename> as contents. When specifying a file,
   you can also specify the file content type by appending ';type=<mime type>'
-  to the file name. You can also post the contents of several files in one field.
-  For example, the field name 'coolfiles' is used to send three  files, with
-  different content types using the following syntax:
+  to the file name. You can also post the contents of several files in one
+  field.  For example, the field name 'coolfiles' is used to send three files,
+  with different content types using the following syntax:
 
         curl -F "coolfiles=@fil1.gif;type=image/gif,fil2.txt,fil3.html" \
         http://www.post.com/postit.cgi
 
   If the content-type is not specified, curl will try to guess from the file
-  extension  (it only knows a few), or use the previously specified type
-  (from an earlier file if several files are specified in a list) or else it
-  will  using the default type 'text/plain'.
+  extension (it only knows a few), or use the previously specified type (from
+  an earlier file if several files are specified in a list) or else it will
+  using the default type 'text/plain'.
 
   Emulate a fill-in form with -F. Let's say you fill in three fields in a
   form. One field is a file name which to post, one field is your name and one
   field is a file description. We want to post the file we have written named
   "cooltext.txt". To let curl do the posting of this data instead of your
-  favourite browser, you have to read the HTML source of the form page and find
-  the names of the input fields. In our example, the input field names are
-  'file', 'yourname' and 'filedescription'.
+  favourite browser, you have to read the HTML source of the form page and
+  find the names of the input fields. In our example, the input field names
+  are 'file', 'yourname' and 'filedescription'.
 
         curl -F "file=@cooltext.txt" -F "yourname=Daniel" \
              -F "filedescription=Cool text file with cool text inside" \
@@ -404,12 +404,28 @@ SPEED LIMIT
   To have curl abort the download if the speed is slower than 3000 bytes per
   second for 1 minute, run:
 
-        curl -y 3000 -Y 60 www.far-away-site.com
+        curl -Y 3000 -y 60 www.far-away-site.com
 
   This can very well be used in combination with the overall time limit, so
   that the above operatioin must be completed in whole within 30 minutes:
 
-        curl -m 1800 -y 3000 -Y 60 www.far-away-site.com
+        curl -m 1800 -Y 3000 -y 60 www.far-away-site.com
+
+  Forcing curl not to transfer data faster than a given rate is also possible,
+  which might be useful if you're using a limited bandwidth connection and you
+  don't want your transfer to use all of it.
+
+  Make curl transfer data no faster than 10 kilobytes per second:
+
+        curl --limit-rate 10K www.far-away-site.com
+
+    or
+
+        curl --limit-rate 10240 www.far-away-site.com
+
+  Or prevent curl from uploading data faster than 1 megabyte per second:
+
+        curl -T upload --limit-rate 1M ftp://uploadshereplease.com
 
 CONFIG FILE
 
@@ -548,7 +564,7 @@ HTTPS
   from sites that require valid certificates. The only drawback is that the
   certificate needs to be in PEM-format. PEM is a standard and open format to
   store certificates with, but it is not used by the most commonly used
-  browsers (Netscape and MSEI both use the so called PKCS#12 format). If you
+  browsers (Netscape and MSIE both use the so called PKCS#12 format). If you
   want curl to use the certificates you use with your (favourite) browser, you
   may need to download/compile a converter that can convert your browser's
   formatted certificates to PEM formatted ones. This kind of converter is
@@ -567,8 +583,8 @@ HTTPS
 
   Many older SSL-servers have problems with SSLv3 or TLS, that newer versions
   of OpenSSL etc is using, therefore it is sometimes useful to specify what
-  SSL-version curl should use. Use -3 or -2 to specify that exact SSL version
-  to use:
+  SSL-version curl should use. Use -3, -2 or -1 to specify that exact SSL
+  version to use (for SSLv3, SSLv2 or TLSv1 respectively):
 
         curl -2 https://secure.site.com/
 
@@ -601,15 +617,15 @@ RESUMING FILE TRANSFERS
 
  Continue downloading a document:
 
-        curl -c -o file ftp://ftp.server.com/path/file
+        curl -C - -o file ftp://ftp.server.com/path/file
 
  Continue uploading a document(*1):
 
-        curl -c -T file ftp://ftp.server.com/path/file
+        curl -C - -T file ftp://ftp.server.com/path/file
 
  Continue downloading a document from a web server(*2):
 
-        curl -c -o file http://www.server.com/
+        curl -C - -o file http://www.server.com/
 
  (*1) = This requires that the ftp server supports the non-standard command
         SIZE. If it doesn't, curl will say so.
@@ -668,8 +684,14 @@ LDAP
   and offer ldap:// support.
 
   LDAP is a complex thing and writing an LDAP query is not an easy task. I do
-  advice you to dig up the syntax description for that elsewhere, RFC 1959 if
-  no other place is better.
+  advice you to dig up the syntax description for that elsewhere. Two places
+  that might suit you are:
+
+  Netscape's "Netscape Directory SDK 3.0 for C Programmer's Guide Chapter 10:
+  Working with LDAP URLs":
+  http://developer.netscape.com/docs/manuals/dirsdk/csdk30/url.htm
+
+  RFC 2255, "The LDAP URL Format" http://www.rfc-editor.org/rfc/rfc2255.txt
 
   To show you an example, this is now I can get all people from my local LDAP
   server that has a certain sub-domain in their email address:
@@ -683,7 +705,7 @@ ENVIRONMENT VARIABLES
 
   Curl reads and understands the following environment variables:
 
-        HTTP_PROXY, HTTPS_PROXY, FTP_PROXY, GOPHER_PROXY
+        http_proxy, HTTPS_PROXY, FTP_PROXY, GOPHER_PROXY
 
   They should be set for protocol-specific proxies. General proxy should be
   set with
@@ -710,9 +732,9 @@ NETRC
   passwords, so therefor most unix programs won't read this file unless it is
   only readable by yourself (curl doesn't care though).
 
-  Curl supports .netrc files if told so (using the -n/--netrc option). This is
-  not restricted to only ftp, but curl can use it for all protocols where
-  authentication is used.
+  Curl supports .netrc files if told so (using the -n/--netrc and
+  --netrc-optional options). This is not restricted to only ftp,
+  but curl can use it for all protocols where authentication is used.
 
   A very simple .netrc file could look something like:
 
@@ -794,19 +816,39 @@ PERSISTANT CONNECTIONS
 MAILING LISTS
 
   For your convenience, we have several open mailing lists to discuss curl,
-  its development and things relevant to this.
+  its development and things relevant to this. Get all info at
+  http://curl.haxx.se/mail/. The lists available are:
 
-  To subscribe to the main curl list, mail curl-request@contactor.se with
-  "subscribe <fill in your email address>" in the body.
+  curl-users
 
-  To subscribe to the curl-library users/deverlopers list, follow the
-  instructions at http://curl.haxx.se/mail/
+    Users of the command line tool. How to use it, what doesn't work, new
+    features, related tools, questions, news, installations, compilations,
+    running, porting etc.
 
-  To subscribe to the curl-announce list, to only get information about new
-  releases, follow the instructions at http://curl.haxx.se/mail/
+  curl-library
 
-  To subscribe to the curl-and-PHP list in which curl using with PHP is
-  discussed, follow the instructions at http://curl.haxx.se/mail/
+    Developers using or developing libcurl. Bugs, extensions, improvements.
+
+  curl-announce
+
+    Low-traffic. Only announcements of new public versions.
+
+  curl-and-PHP
+
+    Using the curl functions in PHP. Everything curl with a PHP angle. Or PHP
+    with a curl angle.
+
+  curl-commits
+
+    Receives notifications on all CVS commits done to the curl source module.
+    This can become quite a large amount of mails during intense development,
+    be aware. This is for us who like email...
+
+  curl-www-commits
+
+    Receives notifications on all CVS commits done to the curl www module
+    (basicly the web site).  This can become quite a large amount of mails
+    during intense changing, be aware. This is for us who like email...
 
   Please direct curl questions, feature requests and trouble reports to one of
   these mailing lists instead of mailing any individual.

docs/Makefile.am

@@ -6,72 +6,42 @@ AUTOMAKE_OPTIONS = foreign no-dependencies
 
 man_MANS = \
 	curl.1 \
-	curl-config.1 \
-	curl_easy_cleanup.3 \
-	curl_easy_getinfo.3 \
-	curl_easy_init.3 \
-	curl_easy_perform.3 \
-	curl_easy_setopt.3 \
-	curl_easy_duphandle.3 \
-	curl_formparse.3 \
-	curl_formadd.3 \
-	curl_formfree.3 \
-	curl_getdate.3 \
-	curl_getenv.3 \
-	curl_slist_append.3 \
-	curl_slist_free_all.3 \
-	curl_version.3 \
-	curl_escape.3 \
-	curl_unescape.3 \
-	curl_strequal.3 \
-	curl_strnequal.3 \
-	curl_mprintf.3 \
-	curl_global_init.3 \
-	curl_global_cleanup.3 \
-	libcurl.3
-
-SUBDIRS = examples
+	curl-config.1
 
 HTMLPAGES = \
 	curl.html \
-	curl-config.html \
-	curl_easy_cleanup.html \
-	curl_easy_getinfo.html \
-	curl_easy_init.html \
-	curl_easy_perform.html \
-	curl_easy_setopt.html \
-	curl_easy_duphandle.html \
-	curl_formadd.html \
-	curl_formparse.html \
-	curl_formfree.html \
-	curl_getdate.html \
-	curl_getenv.html \
-	curl_slist_append.html \
-	curl_slist_free_all.html \
-	curl_version.html \
-	curl_escape.html \
-	curl_unescape.html \
-	curl_strequal.html \
-	curl_strnequal.html \
-	curl_mprintf.html \
-	curl_global_init.html \
-	curl_global_cleanup.html \
-	libcurl.html \
-	index.html
+	curl-config.html
 
-EXTRA_DIST = $(man_MANS) \
-	MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS \
-	README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS \
-	VERSIONS $(HTMLPAGES)
+PDFPAGES = \
+	curl.pdf \
+	curl-config.pdf
+
+SUBDIRS = examples libcurl
+
+EXTRA_DIST = MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS		\
+	     README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS	\
+	     VERSIONS KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) \
+	     HISTORY INSTALL libcurl-the-guide $(PDFPAGES)
 
 MAN2HTML= gnroff -man $< | man2html >$@
 
-SUFFIXES = .1 .3 .html
+SUFFIXES = .1 .3 .html .pdf
 
 html: $(HTMLPAGES)
+	cd libcurl; make html
 
 .3.html:
 	$(MAN2HTML)
 
 .1.html:
 	$(MAN2HTML)
+
+MAN2PDF = groff -Tps -man curl.1 $< >$@
+
+pdf:
+	for file in $(man_MANS); do \
+	  foo=`echo $$file | sed -e 's/\.[0-9]$$//g'`; \
+	  groff -Tps -man $$file >$$foo.ps; \
+	  ps2pdf $$foo.ps $$foo.pdf; \
+	done
+	cd libcurl; make pdf

docs/RESOURCES

@@ -5,10 +5,9 @@
                              \___|\___/|_| \_\_____|
 
 
-This document has been introduced in order to let you find documents that
-specify standards used by curl, software that extends curl, web pages with
-"competing" utilities and information pages that describe some of the tools
-that we use to build/compile/develop curl.
+This document lists documents that specify standards used by curl, software
+that extends curl, web pages with similar utilities and information pages that
+describe some of the tools that we use to build/compile/develop curl.
 
 Standards
 ---------

docs/THANKS

@@ -79,3 +79,6 @@ that have contributed with non-trivial parts:
  - Eric Lavigne <erlavigne@wanadoo.fr>
  - Marcus Webster <marcus.webster@phocis.com>
  - G<>tz Babin-Ebell <babin<69>ebell@trustcenter.de>
+ - Andreas Damm <andreas-sourceforge@radab.org>
+ - Jacky Lam <sylam@emsoftltd.com>
+ - James Gallagher <jgallagher@gso.uri.edu>

docs/TODO

@@ -6,40 +6,67 @@
 
 TODO
 
- Things to do in project cURL. Please tell me what you think, contribute and
- send me patches that improve things! Also check the http://curl.haxx.se/dev
- web section for various development notes.
+ Things to do in project cURL. Please tell us what you think, contribute and
+ send us patches that improve things! Also check the http://curl.haxx.se/dev
+ web section for various technical development notes.
 
  LIBCURL
 
- * Consider an interface to libcurl that allows applications to easier get to
-   know what cookies that are sent back in the response headers.
+ * Introduce an interface to libcurl that allows applications to easier get to
+   know what cookies that are received. Pushing interface that calls a
+   callback on each received cookie? Querying interface that asks about
+   existing cookies? We probably need both. Enable applications to modify
+   existing cookies as well.
 
  * Make content encoding/decoding internally be made using a filter system.
 
- * The new 'multi' interface is being designed. Work out the details, start
-   implementing and write test applications!
-   [http://curl.haxx.se/dev/multi.h]
-
- * Add a name resolve cache to libcurl to make repeated fetches to the same
-   host name (when persitancy isn't available) faster.
-
  * Introduce another callback interface for upload/download that makes one
    less copy of data and thus a faster operation.
    [http://curl.haxx.se/dev/no_copy_callbacks.txt]
 
- * Add configure options that disables certain protocols in libcurl to
-   decrease footprint.  '--disable-[protocol]' where protocol is http, ftp,
-   telnet, ldap, dict or file.
+ * Add asynchronous name resolving (http://daniel.haxx.se/resolver/). This
+   should be made to work on most of the supported platforms, or otherwise it
+   isn't really interesting.
 
- * Add asynchronous name resolving. http://curl.haxx.se/dev/async-resolver.txt
+ * Data sharing. Tell which easy handles within a multi handle that should
+   share cookies, connection cache, dns cache, ssl session cache.  Full
+   suggestion found here: http://curl.haxx.se/dev/sharing.txt
 
- * Strip any trailing CR from the error message when Curl_failf() is used.
+ * Mutexes. By adding mutex callback support, the 'data sharing' mentioned
+   above can be made between several easy handles running in different threads
+   too. The actual mutex implementations will be left for the application to
+   implement, libcurl will merely call 'getmutex' and 'leavemutex' callbacks.
+   Part of the sharing suggestion at: http://curl.haxx.se/dev/sharing.txt
+
+ * Set the SO_KEEPALIVE socket option to make libcurl notice and disconnect
+   very long time idle connections.
+
+ * Go through the code and verify that libcurl deals with big files >2GB and
+   >4GB all over. Bug reports (and source reviews) indicate that it doesn't
+   currently work properly.
+
+ * CURLOPT_MAXFILESIZE. Prevent downloads that are larger than the specified
+   size. CURLE_FILESIZE_EXCEEDED would then be returned. Gautam Mani
+   requested. That is, the download should not even begin but be aborted
+   immediately.
+
+ * Allow the http_proxy (and other) environment variables to contain user and
+   password as well in the style: http://proxyuser:proxypasswd@proxy:port
+   Berend Reitsma suggested.
+
+ LIBCURL - multi interface
+
+ * Make sure we don't ever loop because of non-blocking sockets return
+   EWOULDBLOCK or similar. This FTP command sending etc.
+
+ * Make uploads treated better. We need a way to tell libcurl we have data to
+   write, as the current system expects us to upload data each time the socket
+   is writable and there is no way to say that we want to upload data soon
+   just not right now, without that aborting the upload.
 
  DOCUMENTATION
 
- * Document all CURLcode error codes, why they happen and what most likely
-   will make them not happen again.
+ * More and better
 
  FTP
 
@@ -49,29 +76,25 @@ TODO
    receiver will convert the data from the standard form to his own internal
    form."
 
+ * Since USERPWD always override the user and password specified in URLs, we
+   might need another way to specify user+password for anonymous ftp logins.
+
  * An option to only download remote FTP files if they're newer than the local
    one is a good idea, and it would fit right into the same syntax as the
    already working http dito works. It of course requires that 'MDTM' works,
    and it isn't a standard FTP command.
 
- * Suggested on the mailing list: CURLOPT_FTP_MKDIR...!
-
- * Always use the FTP SIZE command before downloading, as that makes it more
-   likely that we know the size when downloading. Some sites support SIZE but
-   don't show the size in the RETR response!
+ * Add FTPS support with SSL for the data connection too.  This should be made
+   according to the specs written in draft-murray-auth-ftp-ssl-08.txt,
+   "Securing FTP with TLS"
 
  HTTP
 
- * HTTP PUT for files passed on stdin *OR* when the --crlf option is
-   used. Requires libcurl to send the file with chunked content
-   encoding. [http://curl.haxx.se/dev/HTTP-PUT-stdin.txt] When the filter
-   system mentioned above gets real, it'll be a piece of cake to add.
-
- * "Content-Encoding: compress/gzip/zlib" HTTP 1.1 clearly defines how to get
-   and decode compressed documents. There is the zlib that is pretty good at
-   decompressing stuff. This work was started in October 1999 but halted again
-   since it proved more work than we thought. It is still a good idea to
-   implement though. This requires the filter system mentioned above.
+ * Pass a list of host name to libcurl to which we allow the user name and
+   password to get sent to. Currently, it only get sent to the host name that
+   the first URL uses (to prevent others from being able to read it), but this
+   also prevents the authentication info from getting sent when following
+   locations to legitimate other host names.
 
  * Authentication: NTLM. Support for that MS crap called NTLM
    authentication. MS proxies and servers sometime require that. Since that
@@ -83,47 +106,96 @@ TODO
    http://www.innovation.ch/java/ntlm.html that contains detailed reverse-
    engineered info.
 
- * RFC2617 compliance, "Digest Access Authentication"
-   A valid test page seem to exist at:
-   http://hopf.math.nwu.edu/testpage/digest/
-   And some friendly person's server source code is available at
-   http://hopf.math.nwu.edu/digestauth/index.html
-   Then there's the Apache mod_digest source code too of course.  It seems as
-   if Netscape doesn't support this, and not many servers do. Although this is
-   a lot better authentication method than the more common "Basic". Basic
-   sends the password in cleartext over the network, this "Digest" method uses
-   a challange-response protocol which increases security quite a lot.
+ * RFC2617 compliance, "Digest Access Authentication" A valid test page seem
+   to exist at: http://hopf.math.nwu.edu/testpage/digest/ And some friendly
+   person's server source code is available at
+   http://hopf.math.nwu.edu/digestauth/index.html Then there's the Apache
+   mod_digest source code too of course.  It seems as if Netscape doesn't
+   support this, and not many servers do. Although this is a lot better
+   authentication method than the more common "Basic". Basic sends the
+   password in cleartext over the network, this "Digest" method uses a
+   challange-response protocol which increases security quite a lot.
+
+ * Pipelining. Sending multiple requests before the previous one(s) are done.
+   This could possibly be implemented using the multi interface to queue
+   requests and the response data.
 
  TELNET
 
  * Make TELNET work on windows98!
 
+ * Reading input (to send to the remote server) on stdin is a crappy solution
+   for library purposes. We need to invent a good way for the application to
+   be able to provide the data to send.
+
+ * Move the telnet support's network select() loop go away and merge the code
+   into the main transfer loop. Until this is done, the multi interface won't
+   work for telnet.
+
  SSL
 
+ * If you really want to improve the SSL situation, you should probably have a
+   look at SSL cafile loading as well - quick traces look to me like these are
+   done on every request as well, when they should only be necessary once per
+   ssl context (or once per handle). Even better would be to support the SSL
+   CAdir option - instead of loading all of the root CA certs for every
+   request, this option allows you to only read the CA chain that is actually
+   required (into the cache)...
+
  * Add an interface to libcurl that enables "session IDs" to get
    exported/imported. Cris Bailiff said: "OpenSSL has functions which can
    serialise the current SSL state to a buffer of your choice, and
    recover/reset the state from such a buffer at a later date - this is used
-   by mod_ssl for apache to implement and SSL session ID cache"
+   by mod_ssl for apache to implement and SSL session ID cache". This whole
+   idea might become moot if we enable the 'data sharing' as mentioned in the
+   LIBCURL label above.
+
+ * OpenSSL supports a callback for customised verification of the peer
+   certificate, but this doesn't seem to be exposed in the libcurl APIs. Could
+   it be? There's so much that could be done if it were! (brought by Chris
+   Clark)
 
  * Make curl's SSL layer option capable of using other free SSL libraries.
    Such as the Mozilla Security Services
    (http://www.mozilla.org/projects/security/pki/nss/) and GNUTLS
    (http://gnutls.hellug.gr/)
 
+ LDAP
+
+ * Look over the implementation. The looping will have to "go away" from the
+   lib/ldap.c source file and get moved to the main network code so that the
+   multi interface and friends will work for LDAP as well.
+
  CLIENT
 
+ * Add an option that prevents cURL from overwiting existing local files. When
+   used, and there already is an existing file with the target file name
+   (either -O or -o), a number should be appended (and increased if already
+   existing). So that index.html becomes first index.html.1 and then
+   index.html.2 etc. Jeff Pohlmeyer suggested.
+
  * "curl ftp://site.com/*.txt"
 
  * Several URLs can be specified to get downloaded. We should be able to use
    the same syntax to specify several files to get uploaded (using the same
    persistant connection), using -T.
 
- * Say you have a list of FTP addresses to download in a file named
-   ftp-list.txt: "cat ftp-list.txt | xargs curl -O -O -O [...]". curl _needs_
-   an "-Oalways" flag -- all addresses on the command line use the base
-   filename to store locally.  Else a script must precount the # of URLs,
-   construct the proper number of "-O"s...
+ * When the multi interface has been implemented and proved to work, the
+   client could be told to use maximum N simultaneous transfers and then just
+   make sure that happens. It should of course not make more than one
+   connection to the same remote host.
+
+ * Extending the capabilities of the multipart formposting. How about leaving
+   the ';type=foo' syntax as it is and adding an extra tag (headers) which
+   works like this: curl -F "coolfiles=@fil1.txt;headers=@fil1.hdr" where
+   fil1.hdr contains extra headers like
+
+     Content-Type: text/plain; charset=KOI8-R"
+     Content-Transfer-Encoding: base64
+     X-User-Comment: Please don't use browser specific HTML code
+
+   which should overwrite the program reasonable defaults (plain/text,
+   8bit...) (Idea brough to us by kromJx)
 
  TEST SUITE
 

docs/curl-config.1

@@ -2,7 +2,7 @@
 .\" nroff -man curl-config.1
 .\" Written by Daniel Stenberg
 .\"
-.TH curl-config 1 "16 August 2001" "Curl 7.8.1" "curl-config manual"
+.TH curl-config 1 "8 Oct 2002" "Curl 7.10" "curl-config manual"
 .SH NAME
 curl-config \- Get information about a libcurl installation
 .SH SYNOPSIS
@@ -11,6 +11,10 @@ curl-config \- Get information about a libcurl installation
 .B curl-config
 displays information about a previous curl and libcurl installation.
 .SH OPTIONS
+.IP "--ca"
+Displays the built-in path to the CA cert bundle this libcurl uses.
+.IP "--cc"
+Displays the compiler used to build libcurl.
 .IP "--cflags"
 Set of compiler options (CFLAGS) to use when compiling files that use
 libcurl. Currently that is only thw include path to the curl include files.
@@ -38,18 +42,23 @@ major, minor, patch. So that libcurl 7.7.4 would appear as 070704 and libcurl
 .SH "EXAMPLES"
 What linker options do I need when I link with libcurl?
 
-  curl-config --libs
+  $ curl-config --libs
 
 What compiler options do I need when I compile using libcurl functions?
 
-  curl-config --cflags
+  $ curl-config --cflags
 
 How do I know if libcurl was built with SSL support?
 
-  curl-config --feature | grep SSL
+  $ curl-config --feature | grep SSL
 
 What's the installed libcurl version?
 
-  curl-config --version
+  $ curl-config --version
+
+How do I build a single file with a one-line command?
+
+  $ `curl-config --cc --cflags --libs` -o example example.c
+
 .SH "SEE ALSO"
 .BR curl (1)

docs/curl.1

@@ -2,7 +2,7 @@
 .\" nroff -man curl.1
 .\" Written by Daniel Stenberg
 .\"
-.TH curl 1 "30 Nov 2001" "Curl 7.9.2" "Curl Manual"
+.TH curl 1 "11 Sep 2002" "Curl 7.10" "Curl Manual"
 .SH NAME
 curl \- transfer a URL
 .SH SYNOPSIS
@@ -95,14 +95,11 @@ If this option is used twice, the second one will disable ASCII usage.
 must be using valid ciphers. Read up on SSL cipher list details on this URL:
 .I http://www.openssl.org/docs/apps/ciphers.html (Option added in curl 7.9)
 
-If this option is used severl times, the last one will override the others.
+If this option is used several times, the last one will override the others.
 .IP "--connect-timeout <seconds>"
 Maximum time in seconds that you allow the connection to the server to take.
 This only limits the connection phase, once curl has connected this option is
-of no more use. This option didn't work in win32 systems until 7.7.2.  See
-also the
-.I "--max-time"
-option.
+of no more use. See also the \fI--max-time\fP option.
 
 If this option is used several times, the last one will be used.
 .IP "-c/--cookie-jar <file name>"
@@ -125,6 +122,13 @@ Use "-C -" to tell curl to automatically find out where/how to resume the
 transfer. It then uses the given output/input files to figure that out.
 
 If this option is used several times, the last one will be used.
+.IP "---create-dirs"
+When used in conjunction with the -o option, curl will create the necessary 
+local directory hierarchy as needed.
+.IP "--crlf"
+(FTP) Convert LF to CRLF in upload. Useful for MVS (OS/390).
+
+If this option is used twice, the second will again disable crlf converting.
 .IP "-d/--data <data>"
 (HTTP) Sends the specified data in a POST request to the HTTP server, in a way
 that can emulate as if a user has filled in a HTML form and pressed the submit
@@ -167,16 +171,17 @@ append data.
 downloads. Curl will normally always first attempt to use EPSV before PASV,
 but with this option, it will not try using EPSV.
 
-IF this option is used several times, each occurrence will toggle this on/off.
+If this option is used several times, each occurrence will toggle this on/off.
 .IP "-D/--dump-header <file>"
-(HTTP/FTP)
-Write the HTTP headers to this file. Write the FTP file info to this
-file if -I/--head is used.
+Write the protocol headers to the specified file.
 
 This option is handy to use when you want to store the cookies that a HTTP
 site sends to you. The cookies could then be read in a second curl invoke by
 using the -b/--cookie option!
 
+When used on FTP, the ftp server response lines are considered being "headers"
+and thus are saved there.
+
 If this option is used several times, the last one will be used.
 .IP "-e/--referer <URL>"
 (HTTP) Sends the "Referer Page" information to the HTTP server. This can also
@@ -187,6 +192,12 @@ previous URL when it follows a Location: header. The ";auto" string can be
 used alone, even if you don't set an initial referer.
 
 If this option is used several times, the last one will be used.
+.IP "--environment"
+(RISC OS ONLY) Sets a range of environment variables, using the names the -w
+option supports, to easier allow extraction of useful information after having
+run curl.
+
+If this option is used several times, each occurrence will toggle this on/off.
 .IP "--egd-file <file>"
 (HTTPS) Specify the path name to the Entropy Gathering Daemon socket. The
 socket is used to seed the random engine for SSL connections. See also the
@@ -203,17 +214,25 @@ certificate concatenated!
 If this option is used several times, the last one will be used.
 .IP "--cacert <CA certificate>"
 (HTTPS) Tells curl to use the specified certificate file to verify the
-peer. The certificate must be in PEM format.
+peer. The file may contain multiple CA certificates. The certificate(s) must
+be in PEM format.
+
+If this option is used several times, the last one will be used.
+.IP "--capath <CA certificate directory>"
+(HTTPS) Tells curl to use the specified certificate directory to verify the
+peer. The certificates must be in PEM format, and the directory must have been 
+processed using the c_rehash utility supplied with openssl. Certificate directories
+are not supported under Windows (because c_rehash uses symbolink links to
+create them). Using --capath can allow curl to make https connections much
+more efficiently than using --cacert if the --cacert file contains many CA certificates.
 
 If this option is used several times, the last one will be used.
 .IP "-f/--fail"
-(HTTP)
-Fail silently (no output at all) on server errors. This is mostly done
-like this to better enable scripts etc to better deal with failed
-attempts. In normal cases when a HTTP server fails to deliver a
-document, it returns a HTML document stating so (which often also
-describes why and more). This flag will prevent curl from
-outputting that and fail silently instead.
+(HTTP) Fail silently (no output at all) on server errors. This is mostly done
+like this to better enable scripts etc to better deal with failed attempts. In
+normal cases when a HTTP server fails to deliver a document, it returns a HTML
+document stating so (which often also describes why and more). This flag will
+prevent curl from outputting that and fail silently instead.
 
 If this option is used twice, the second will again disable silent failure.
 .IP "-F/--form <name=content>"
@@ -241,13 +260,17 @@ This option can be used multiple times.
 This option switches off the "URL globbing parser". When you set this option,
 you can specify URLs that contain the letters {}[] without having them being
 interpreted by curl itself. Note that these letters are not normal legal URL
-contents but they should be encoded according to the URI standard. (Option
-added in curl 7.6)
+contents but they should be encoded according to the URI standard.
 .IP "-G/--get"
 When used, this option will make all data specified with -d/--data or
 --data-binary to be used in a HTTP GET request instead of the POST request
 that otherwise would be used. The data will be appended to the URL with a '?'
 separator. (Option added in curl 7.9)
+
+If used in combination with -I, the POST data will instead be appended to the
+URL with a HEAD request.
+
+If used multiple times, nothing special happens.
 .IP "-h/--help"
 Usage help.
 .IP "-H/--header <header>"
@@ -260,7 +283,7 @@ set headers without knowing perfectly well what you're doing. Replacing an
 internal header with one without content on the right side of the colon will
 prevent that header from appearing.
 
-This option can be used multiple times.
+This option can be used multiple times to add/replace/remove multiple headers.
 .IP "-i/--include"
 (HTTP)
 Include the HTTP-header in the output. The HTTP-header includes things
@@ -281,6 +304,23 @@ which this uses to get nothing but the header of a document. When used
 on a FTP file, curl displays the file size only.
 
 If this option is used twice, the second will again disable header only.
+.IP "-j/--junk-session-cookies"
+(HTTP) When curl is told to read cookies from a given file, this option will
+make it discard all "session cookies". This will basicly have the same effect
+as if a new session is started. Typical browsers always discard session
+cookies when they're closed down. (Added in 7.9.7)
+
+If this option is used several times, each occurrence will toggle this on/off.
+.IP "-k/--insecure"
+(SSL) This option explicitly allows curl to perform "insecure" SSL connections
+and transfers. Starting with curl 7.10, all SSL connections will be attempted
+to be made secure by using the CA certificate bundle installed by
+default. This makes all connections considered "insecure" to fail unless
+-k/--insecure is used.
+
+This option is ignored if --cacert or --capath is used!
+
+If this option is used twice, the second time will again disable it.
 .IP "--krb4 <level>"
 (FTP) Enable kerberos4 authentication and use. The level must be entered and
 should be one of 'clear', 'safe', 'confidential' or 'private'. Should you use
@@ -298,7 +338,26 @@ treated as a comment.
 
 Specify the filename as '-' to make curl read the file from stdin.
 
+Note that to be able to specify a URL in the config file, you need to specify
+it using the --url option, and not by simply writing the URL on its own
+line. So, it could look similar to this:
+
+url = "http://curl.haxx.se/docs/"
+
 This option can be used multiple times.
+.IP "--limit-rate <speed>"
+Specify the maximum transfer rate you want curl to use. This feature is useful
+if you have a limited pipe and you'd prefer you have your transfer not use
+your entire bandwidth.
+
+The given speed is measured in bytes/second, unless a suffix is
+appended. Appending 'k' or 'K' will count the number as kilobytes, 'm' or M'
+makes it megabytes while 'g' or 'G' makes it gigabytes. Examples: 200K, 3m and
+1G.
+
+This option was introduced in curl 7.10.
+
+If this option is used several times, the last one will be used.
 .IP "-l/--list-only"
 (FTP)
 When listing an FTP directory, this switch forces a name-only view.
@@ -306,6 +365,10 @@ Especially useful if you want to machine-parse the contents of an FTP
 directory since the normal directory view doesn't use a standard look
 or format.
 
+This option causes an FTP NLST command to be sent.  Some FTP servers
+list only files in their response to NLST; they do not include
+subdirectories and symbolic links.
+
 If this option is used twice, the second will again disable list only.
 .IP "-L/--location"
 (HTTP/HTTPS) If the server reports that the requested page has a different
@@ -319,10 +382,8 @@ If this option is used twice, the second will again disable location following.
 .IP "-m/--max-time <seconds>"
 Maximum time in seconds that you allow the whole operation to take.  This is
 useful for preventing your batch jobs from hanging for hours due to slow
-networks or links going down.  This doesn't work fully in win32 systems.
-See also the
-.I "--connect-timeout"
-option.
+networks or links going down.  This doesn't work fully in win32 systems.  See
+also the \fI--connect-timeout\fP option.
 
 If this option is used several times, the last one will be used.
 .IP "-M/--manual"
@@ -369,6 +430,8 @@ or use several variables like:
   curl http://{site,host}.host[1-5].com -o "#1_#2"
 
 You may use this option as many times as you have number of URLs.
+
+See also the --create-dirs option to create the local directories dynamically.
 .IP "-O/--remote-name"
 Write output to a local file named like the remote file we get. (Only
 the file part of the remote file is used, the path is cut off.)
@@ -479,6 +542,12 @@ If this option is used twice, the second will again disable mute.
 When used with -s it makes curl show error message if it fails.
 
 If this option is used twice, the second will again disable show error.
+.IP "--stderr <file>"
+Redirect all writes to stderr to the specified file instead. If the file name
+is a plain '-', it is instead written to stdout. This option has no point when
+you're using a shell with decent redirecting capabilities.
+
+If this option is used several times, the last one will be used.
 .IP "-t/--telnet-option <OPT=val>"
 Pass options to the telnet protocol. Supported options are:
 
@@ -498,6 +567,24 @@ this is used on a http(s) server, the PUT command will be used.
 Use the file name "-" (a single dash) to use stdin instead of a given file.
 
 If this option is used several times, the last one will be used.
+.IP "--trace <file>"
+Enables a full trace dump of all incoming and outgoing data, including
+descriptive information, to the given output file. Use "-" as filename to have
+the output sent to stdout.
+
+If this option is used several times, the last one will be used. (Added in
+curl 7.9.7)
+.IP "--trace-ascii <file>"
+Enables a full trace dump of all incoming and outgoing data, including
+descriptive information, to the given output file. Use "-" as filename to have
+the output sent to stdout.
+
+This is very similar to --trace, but leaves out the hex part and only shows
+the ASCII part of the dump. It makes smaller output that might be easier to
+read for untrained humans.
+
+If this option is used several times, the last one will be used. (Added in
+curl 7.9.7)
 .IP "-u/--user <user:password>"
 Specify user and password to use when fetching. See README.curl for detailed
 examples of how to use this. If no password is specified, curl will
@@ -510,7 +597,7 @@ password is specified, curl will ask for it interactively.
 
 If this option is used several times, the last one will be used.
 .IP "--url <URL>"
-Specify a URL to fetch. This option is mostly handy when you wanna specify
+Specify a URL to fetch. This option is mostly handy when you want to specify
 URL(s) in a config file.
 
 This option may be used any number of times. To control where this URL is written, use the
@@ -519,10 +606,13 @@ or the
 .I -O
 options.
 .IP "-v/--verbose"
-Makes the fetching more verbose/talkative. Mostly usable for
-debugging. Lines starting with '>' means data sent by curl, '<'
-means data received by curl that is hidden in normal cases and lines
-starting with '*' means additional info provided by curl.
+Makes the fetching more verbose/talkative. Mostly usable for debugging. Lines
+starting with '>' means data sent by curl, '<' means data received by curl
+that is hidden in normal cases and lines starting with '*' means additional
+info provided by curl.
+
+Note that if you want to see HTTP headers in the output, \fI-i/--include\fP
+might be option you're looking for.
 
 If this option is used twice, the second will again disable verbose.
 .IP "-V/--version"
@@ -538,7 +628,7 @@ write "@-".
 The variables present in the output format will be substituted by the value or
 text that curl thinks fit, as described below. All variables are specified
 like %{variable_name} and to output a normal % you just write them like
-%%. You can output a newline by using \\n, a carrige return with \\r and a tab
+%%. You can output a newline by using \\n, a carriage return with \\r and a tab
 space with \\t.
 
 .B NOTE:
@@ -594,6 +684,9 @@ The average download speed that curl measured for the complete download.
 .TP
 .B speed_upload
 The average upload speed that curl measured for the complete upload.
+.TP
+.B content_type
+The Content-Type of the requested document, if there was any. (Added in 7.9.5)
 .RE
 
 If this option is used several times, the last one will be used.
@@ -601,6 +694,10 @@ If this option is used several times, the last one will be used.
 Use specified HTTP proxy. If the port number is not specified, it is assumed
 at port 1080.
 
+This option overrides existing environment variables that sets proxy to
+use. If there's an environment variable setting a proxy, you can set proxy to
+"" to override it.
+
 \fBNote\fP that all operations that are performed over a HTTP proxy will
 transparantly be converted to HTTP. It means that certain protocol specific
 operations might not be available. This is not the case if you can tunnel
@@ -623,6 +720,9 @@ If a download is slower than speed-limit bytes per second during a speed-time
 period, the download gets aborted. If speed-time is used, the default
 speed-limit will be 1 unless set with -y.
 
+This option controls transfers and thus will not affect slow connects etc. If
+this is a concern for you, try the \fI--connect-timeout\fP option.
+
 If this option is used several times, the last one will be used.
 .IP "-Y/--speed-limit <speed>"
 If a download is slower than this given speed, in bytes per second, for
@@ -645,6 +745,12 @@ Start the date expression with a dash (-) to make it request for a document
 that is older than the given date/time, default is a document that is newer
 than the specified date/time.
 
+If this option is used several times, the last one will be used.
+.IP "-Z/--max-redirs <num>"
+Set maximum number of redirection-followings allowed. If -L/--location is
+used, this option can be used to prevent curl from following redirections "in
+absurdum".
+
 If this option is used several times, the last one will be used.
 .IP "-3/--sslv3"
 (HTTPS)
@@ -660,16 +766,6 @@ Make curl display progress information as a progress bar instead of the
 default statistics.
 
 If this option is used twice, the second will again disable the progress bar.
-.IP "--crlf"
-(FTP) Convert LF to CRLF in upload. Useful for MVS (OS/390).
-
-If this option is used twice, the second will again disable crlf converting.
-.IP "--stderr <file>"
-Redirect all writes to stderr to the specified file instead. If the file name
-is a plain '-', it is instead written to stdout. This option has no point when
-you're using a shell with decent redirecting capabilities.
-
-If this option is used several times, the last one will be used.
 .SH FILES
 .I ~/.curlrc
 .RS
@@ -731,7 +827,8 @@ FTP couldn't set binary. Couldn't change transfer method to binary.
 .IP 18
 Partial file. Only a part of the file was transfered.
 .IP 19
-FTP couldn't RETR file. The RETR command failed.
+FTP couldn't download/access the given file, the RETR (or similar) command
+failed.
 .IP 20
 FTP write error. The transfer was reported bad by the server.
 .IP 21
@@ -788,7 +885,7 @@ Internal error. A function was called in a bad order.
 .IP 45
 Interface error. A specified outgoing interface could not be used.
 .IP 46
-Bad password entered. An error was signalled when the password was entered.
+Bad password entered. An error was signaled when the password was entered.
 .IP 47
 Too many redirects. When following redirects, curl hit the maximum amount.
 .IP 48
@@ -799,6 +896,24 @@ Malformed telnet option.
 The remote peer's SSL certificate wasn't ok
 .IP 52
 The server didn't reply anything, which here is considered an error.
+.IP 53
+SSL crypto engine not found
+.IP 54
+Cannot set SSL crypto engine as default
+.IP 55
+Failed sending network data
+.IP 56
+Failure in receiving network data
+.IP 57
+Share is in use (internal error)
+.IP 58
+Problem with the local certificate
+.IP 59
+Couldn't use specified SSL cipher
+.IP 60
+Problem with the CA cert (path? permission?)
+.IP 61
+Unrecognized transfer encoding
 .IP XX
 There will appear more error codes here in future releases. The existing ones
 are meant to never change.

docs/curl_easy_cleanup.3

@@ -1,29 +0,0 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_easy_cleanup 3 "5 March 2001" "libcurl 7.7" "libcurl Manual"
-.SH NAME
-curl_easy_cleanup - End a libcurl session
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "void curl_easy_cleanup(CURL *" handle ");"
-.ad
-.SH DESCRIPTION
-This function must be the last function to call for a curl session. It is the
-opposite of the
-.I curl_easy_init
-function and must be called with the same
-.I handle
-as input as the curl_easy_init call returned.
-
-This will effectively close all connections libcurl has been used and possibly
-has kept open until now. Don't call this function if you intend to transfer
-more files (libcurl 7.7 or later).
-.SH RETURN VALUE
-None
-.SH "SEE ALSO"
-.BR curl_easy_init "(3), "
-.SH BUGS
-Surely there are some, you tell me!

docs/curl_easy_init.3

@@ -1,34 +0,0 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_easy_init 3 "14 August 2001" "libcurl 7.8.1" "libcurl Manual"
-.SH NAME
-curl_easy_init - Start a libcurl session
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "CURL *curl_easy_init( );"
-.ad
-.SH DESCRIPTION
-This function must be the first function to call, and it returns a CURL handle
-that you shall use as input to the other easy-functions. The init calls
-intializes curl and this call MUST have a corresponding call to
-.I curl_easy_cleanup
-when the operation is complete.
-
-On win32 systems, if you want to init the winsock stuff manually, libcurl will
-not do that for you. WSAStartup() and WSACleanup() should then be called
-accordingly.  If you want libcurl to handle this, use the CURL_GLOBAL_WIN32
-flag in the initial curl_global_init() call.
-
-Using libcurl 7.7 and later, you should perform all your sequential file
-transfers using the same curl handle. This enables libcurl to use persistant
-connections where possible.
-.SH RETURN VALUE
-If this function returns NULL, something went wrong and you cannot use the
-other curl functions.
-.SH "SEE ALSO"
-.BR curl_easy_cleanup "(3), " curl_global_init "(3)
-.SH BUGS
-Surely there are some, you tell me!

docs/curl_formadd.3

@@ -1,165 +0,0 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_formadd 3 "29 October 2001" "libcurl 7.9.1" "libcurl Manual"
-.SH NAME
-curl_formadd - add a section to a multipart/formdata HTTP POST
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "int curl_formadd(struct HttpPost ** " firstitem,
-.BI "struct HttpPost ** " lastitem, " ...);"
-.ad
-.SH DESCRIPTION
-curl_formadd() is used to append sections when building a multipart/formdata
-HTTP POST (sometimes refered to as rfc1867-style posts). Append one section at
-a time until you've added all the sections you want included and then you pass
-the \fIfirstitem\fP pointer as parameter to \fBCURLOPT_HTTPPOST\fP.
-\fIlastitem\fP is set after each call and on repeated invokes it should be
-left as set to allow repeated invokes to find the end of the list faster.
-
-After the \fIlastitem\fP pointer follow the real arguments. (If the following
-description confuses you, jump directly to the examples):
-
-\fBCURLFORM_COPYNAME\fP or \fBCURLFORM_PTRNAME\fP followed by a string is used
-for the name of the section. Optionally one may use \fBCURLFORM_NAMELENGTH\fP
-to specify the length of the name (allowing null characters within the
-name). All options that use the word COPY in their names copy the given
-contents, while the ones with PTR in their names simply points to the (static)
-data you must make sure remain until curl no longer needs it.
-
-The four options for providing values are: \fBCURLFORM_COPYCONTENTS\fP,
-\fBCURLFORM_PTRCONTENTS\fP, \fBCURLFORM_FILE\fP, or \fBCURLFORM_FILECONTENT\fP
-followed by a char or void pointer (allowed for PTRCONTENTS).
-
-\fBCURLFORM_FILECONTENT\fP does a normal post like \fBCURLFORM_COPYCONTENTS\fP
-but the actual value is read from the filename given as a string.
-
-Other arguments may be \fBCURLFORM_CONTENTTYPE\fP if the user wishes to
-specify one (for FILE if no type is given the library tries to provide the
-correct one; for CONTENTS no Content-Type is sent in this case).
-
-For \fBCURLFORM_PTRCONTENTS\fP or \fBCURLFORM_COPYNAME\fP the user may also
-add \fBCURLFORM_CONTENTSLENGTH\fP followed by the length as a long (if not
-given the library will use strlen to determine the length).
-
-For \fBCURLFORM_FILE\fP the user may send multiple files in one section by
-providing multiple \fBCURLFORM_FILE\fP arguments each followed by the filename
-(and each FILE is allowed to have a CONTENTTYPE).
-
-Another possibility to send single or multiple files in one section is to use
-\fBCURLFORM_ARRAY\fP that gets a struct curl_forms array pointer as its
-value. Each structure element has a CURLformoption and a char pointer. For the
-options only \fBCURLFORM_FILE\fP, \fBCURLFORM_CONTENTTYPE\fP, and
-\fBCURLFORM_END\fP (that is used to determine the end of the array and thus
-must be the option of the last and no other element of the curl_forms array)
-are allowed. The effect of this parameter is the same as giving multiple
-\fBCURLFORM_FILE\fP options possibly with \fBCURLFORM_CONTENTTYPE\fP after or
-before each \fBCURLFORM_FILE\fP option.
-
-Should you need to specify extra headers for the form POST section, use
-\fBCURLFORM_CONTENTHEADER\fP. This takes a curl_slist prepared in the usual way
-using \fBcurl_slist_append\fP and appends the list of headers to those Curl
-automatically generates for \fBCURLFORM_CONTENTTYPE\fP and the content 
-disposition. The list must exist while the POST occurs, if you free it before
-the post completes you may experience problems.
-
-The last argument in such an array must always be \fBCURLFORM_END\fP.
-
-The pointers \fI*firstitem\fP and \fI*lastitem\fP should both be pointing to
-NULL in the first call to this function. All list-data will be allocated by
-the function itself. You must call \fIcurl_formfree\fP after the form post has
-been done to free the resources again.
-
-This function will copy all input data except the data pointed to by the
-arguments after \fBCURLFORM_PTRNAME\fP and \fBCURLFORM_PTRCONTENTS\fP and keep
-its own version of it allocated until you call \fIcurl_formfree\fP. When
-you've passed the pointer to \fIcurl_easy_setopt\fP, you must not free the
-list until after you've called \fIcurl_easy_cleanup\fP for the curl handle. If
-you provide a pointer as an arguments after \fBCURLFORM_PTRNAME\fP or
-\fBCURLFORM_PTRCONTENTS\fP you must ensure that the pointer stays valid until
-you call \fIcurl_form_free\fP and \fIcurl_easy_cleanup\fP.
-
-See example below.
-.SH RETURN VALUE
-Returns non-zero if an error occurs.
-.SH EXAMPLE
-.nf
-
- HttpPost* post = NULL;
- HttpPost* last = NULL;
- char namebuffer[] = "name buffer";
- long namelength = strlen(namebuffer);
- char buffer[] = "test buffer";
- char htmlbuffer[] = "<HTML>test buffer</HTML>";
- long htmlbufferlength = strlen(htmlbuffer);
- struct curl_forms forms[3];
- char file1[] = "my-face.jpg";
- char file2[] = "your-face.jpg";
- /* add null character into htmlbuffer, to demonstrate that
-    transfers of buffers containing null characters actually work
- */
- htmlbuffer[8] = '\\0';
-
- /* Add simple name/content section */
- curl_formadd(&post, &last, CURLFORM_COPYNAME, "name",
-              CURLFORM_COPYCONTENTS, "content", CURLFORM_END); 
-
- /* Add simple name/content/contenttype section */
- curl_formadd(&post, &last, CURLFORM_COPYNAME, "htmlcode",
-              CURLFORM_COPYCONTENTS, "<HTML></HTML>",
-              CURLFORM_CONTENTTYPE, "text/html", CURLFORM_END);
-
- /* Add name/ptrcontent section */
- curl_formadd(&post, &last, CURLFORM_COPYNAME, "name_for_ptrcontent",
-              CURLFORM_PTRCONTENTS, buffer, CURLFORM_END);
-
- /* Add ptrname/ptrcontent section */
- curl_formadd(&post, &last, CURLFORM_PTRNAME, namebuffer,
-	      CURLFORM_PTRCONTENTS, buffer, CURLFORM_NAMELENGTH,
-	      namelength, CURLFORM_END);
-
- /* Add name/ptrcontent/contenttype section */
- curl_formadd(&post, &last, CURLFORM_COPYNAME, "html_code_with_hole",
-              CURLFORM_PTRCONTENTS, htmlbuffer,
-              CURLFORM_CONTENTSLENGTH, htmlbufferlength,
-              CURLFORM_CONTENTTYPE, "text/html", CURLFORM_END);
-
- /* Add simple file section */
- curl_formadd(&post, &last, CURLFORM_COPYNAME, "picture",
-              CURLFORM_FILE, "my-face.jpg", CURLFORM_END);
-
- /* Add file/contenttype section */
- curl_formadd(&post, &last, CURLFORM_COPYNAME, "picture",
-              CURLFORM_FILE, "my-face.jpg",
-              CURLFORM_CONTENTTYPE, "image/jpeg", CURLFORM_END);
-
- /* Add two file section */
- curl_formadd(&post, &last, CURLFORM_COPYNAME, "pictures",
-              CURLFORM_FILE, "my-face.jpg",
-              CURLFORM_FILE, "your-face.jpg", CURLFORM_END);
-
- /* Add two file section using CURLFORM_ARRAY */
- forms[0].option = CURLFORM_FILE;
- forms[0].value  = file1;
- forms[1].option = CURLFORM_FILE;
- forms[1].value  = file2;
- forms[2].option  = CURLFORM_END;
-
- /* no option needed for the end marker */
- curl_formadd(&post, &last, CURLFORM_COPYNAME, "pictures",
-              CURLFORM_ARRAY, forms, CURLFORM_END);
- /* Add the content of a file as a normal post text value */
- curl_formadd(&post, &last, CURLFORM_COPYNAME, "filecontent",
-              CURLFORM_FILECONTENT, ".bashrc", CURLFORM_END);
- /* Set the form info */
- curl_easy_setopt(curl, CURLOPT_HTTPPOST, post);
-
-.SH "SEE ALSO"
-.BR curl_easy_setopt "(3), "
-.BR curl_formparse "(3) [deprecated], "
-.BR curl_formfree "(3)"
-.SH BUGS
-Surely there are some, you tell me!
-

docs/examples/.cvsignore

@@ -0,0 +1,2 @@
+Makefile
+Makefile.in

docs/examples/Makefile.am

@@ -4,10 +4,12 @@
 
 AUTOMAKE_OPTIONS = foreign no-dependencies
 
-EXTRA_DIST = README curlgtk.c sepheaders.c simple.c postit.c postit2.c \
-	     win32sockets.c persistant.c ftpget.c Makefile.example \
-	     multithread.c getinmemory.c ftpupload.c httpput.c \
-	     simplessl.c
+EXTRA_DIST = README curlgtk.c sepheaders.c simple.c postit2.c		\
+	     persistant.c ftpget.c Makefile.example			\
+	     multithread.c getinmemory.c ftpupload.c httpput.c		\
+	     simplessl.c ftpgetresp.c http-post.c post-callback.c	\
+	     multi-app.c multi-double.c multi-single.c multi-post.c	\
+	     fopen.c simplepost.c
 
 all:
 	@echo "done"

docs/examples/Makefile.example

@@ -35,7 +35,7 @@ LIBS = -lcurl -lsocket -lnsl -lssl -lcrypto -dl
 
 # Link the target with all objects and libraries
 $(TARGET) : $(OBJS)
-	$(CC) $(LDFLAGS) $(LIBS) -o $(TARGET) $(OBJS)
+	$(CC)  -o $(TARGET) $(OBJS) $(LDFLAGS) $(LIBS)
 
 # Compile the source files into object files
 ftpget.o : ftpget.c

docs/examples/README

@@ -1,7 +1,7 @@
 EXAMPLES
 
-This directory is for tiny libcurl programming examples. They are meant to
-show some simple steps on how you can build your own application to take full
+This directory is for libcurl programming examples. They are meant to show
+some simple steps on how you can build your own application to take full
 advantage of libcurl.
 
 If you end up with other small but still useful example sources, please mail
@@ -10,9 +10,16 @@ them for submission in future packages and on the web site.
 The Makefile.example is an example makefile that could be used to build these
 examples. Just edit the file according to your system and requirements first.
 
-Try the php/examples/ directory for PHP programming snippets!
+Most examples should build fine using a command line like this:
 
-  *PLEASE* do not use the curl.haxx.se site as a test target for your libcurl
-  applications/experiments. Even if the examples in this directory use that
-  site as an example URL at some places, it doesn't mean that the URLs work or
-  that we expect you to actually torture our web site with your tests! Thanks.
+  $ `curl-config --cc --cflags --libs` -o example example.c
+
+Some compilers don't like having the arguments in this order but instead
+want you do reorganize them like:
+
+  $ `curl-config --cc` -o example example.c `curl-config --cflags --libs`
+
+*PLEASE* do not use the curl.haxx.se site as a test target for your libcurl
+applications/experiments. Even if the examples in this directory use that site
+as an example URL at some places, it doesn't mean that the URLs work or that
+we expect you to actually torture our web site with your tests! Thanks.

docs/examples/curlgtk.c

@@ -26,7 +26,11 @@ size_t my_read_func(void *ptr, size_t size, size_t nmemb, FILE *stream)
   return fread(ptr, size, nmemb, stream);
 }
 
-int my_progress_func(GtkWidget *Bar, int t, int d)
+int my_progress_func(GtkWidget *Bar,
+                     double t, /* dltotal */
+                     double d, /* dlnow */
+                     double ultotal,
+                     double ulnow)
 {
 /*  printf("%d / %d (%g %%)\n", d, t, d*100.0/t);*/
   gdk_threads_enter();
@@ -50,6 +54,7 @@ void *curl_thread(void *ptr)
     curl_easy_setopt(curl, CURLOPT_URL, url);
     curl_easy_setopt(curl, CURLOPT_FILE, outfile);
     curl_easy_setopt(curl, CURLOPT_READFUNCTION, my_read_func);
+    curl_easy_setopt(curl, CURLOPT_NOPROGRESS, FALSE);
     curl_easy_setopt(curl, CURLOPT_PROGRESSFUNCTION, my_progress_func);
     curl_easy_setopt(curl, CURLOPT_PROGRESSDATA, Bar);
     

docs/examples/fopen.c

@@ -0,0 +1,222 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This example source code introduces an fopen()/fread()/fclose() emulation
+ * for URL reads. Using an approach similar to this, you could replace your
+ * program's fopen() with this url_fopen() and fread() with url_fread() and
+ * it should be possible to read remote streams instead of (only) local files.
+ *
+ * See the main() function at the bottom that shows a tiny app in action.
+ *
+ * This source code is a proof of concept. It will need further attention to
+ * become production-use useful and solid.
+ *
+ * This example requires libcurl 7.9.7 or later.
+ */
+#include <stdio.h>
+#include <string.h>
+#include <sys/time.h>
+
+#include <curl/curl.h>
+#include <curl/types.h>
+#include <curl/easy.h>
+
+struct data {
+  int type;
+  union {
+    CURL *curl;
+    FILE *file;
+  } handle;
+
+  /* TODO: We should perhaps document the biggest possible buffer chunk we can
+     get from libcurl in one single callback... */
+  char buffer[CURL_MAX_WRITE_SIZE];
+
+  char *readptr; /* read from here */
+  int bytes;     /* bytes available from read pointer */
+
+  CURLMcode m;   /* stored from a previous url_fread() */
+};
+
+typedef struct data URL_FILE;
+
+/* we use a global one for convenience */
+CURLM *multi_handle;
+
+static
+size_t write_callback(char *buffer,
+                      size_t size,
+                      size_t nitems,
+                      void *userp)
+{
+  URL_FILE *url = (URL_FILE *)userp;
+  size *= nitems;
+
+  memcpy(url->readptr, buffer, size);
+  url->readptr += size;
+  url->bytes += size;
+
+  return size;
+}
+
+URL_FILE *url_fopen(char *url, char *operation)
+{
+  /* this code could check for URLs or types in the 'url' and
+     basicly use the real fopen() for standard files */
+
+  URL_FILE *file;
+  int still_running;
+
+  file = (URL_FILE *)malloc(sizeof(URL_FILE));
+  if(!file)
+    return NULL;
+
+  memset(file, 0, sizeof(URL_FILE));
+
+  file->type = 1; /* marked as URL, use 0 for plain file */
+  file->handle.curl = curl_easy_init();
+
+  curl_easy_setopt(file->handle.curl, CURLOPT_URL, url);
+  curl_easy_setopt(file->handle.curl, CURLOPT_FILE, file);
+  curl_easy_setopt(file->handle.curl, CURLOPT_VERBOSE, FALSE);
+  curl_easy_setopt(file->handle.curl, CURLOPT_WRITEFUNCTION, write_callback);
+
+  if(!multi_handle)
+    multi_handle = curl_multi_init();
+
+  curl_multi_add_handle(multi_handle, file->handle.curl);
+
+  while(CURLM_CALL_MULTI_PERFORM ==
+        curl_multi_perform(multi_handle, &still_running));
+
+  /* if still_running would be 0 now, we should return NULL */
+
+  return file;
+}
+
+void url_fclose(URL_FILE *file)
+{
+  /* make sure the easy handle is not in the multi handle anymore */
+  curl_multi_remove_handle(multi_handle, file->handle.curl);
+
+  /* cleanup */
+  curl_easy_cleanup(file->handle.curl);
+}
+
+
+
+size_t url_fread(void *ptr, size_t size, size_t nmemb, URL_FILE *file)
+{
+  fd_set fdread;
+  fd_set fdwrite;
+  fd_set fdexcep;
+  int maxfd;
+  struct timeval timeout;
+  int rc;
+  int still_running = 0;
+
+  if(!file->bytes) { /* no data available at this point */
+
+    file->readptr = file->buffer; /* reset read pointer */
+
+    if(CURLM_CALL_MULTI_PERFORM == file->m) {
+      while(CURLM_CALL_MULTI_PERFORM ==
+            curl_multi_perform(multi_handle, &still_running)) {
+        if(file->bytes) {
+          printf("(fread) WOAH! THis happened!\n");
+          break;        
+        }
+      }
+      if(!still_running) {
+        printf("NO MORE RUNNING AROUND!\n");
+        return 0;
+      }
+    }
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+  
+    /* set a suitable timeout to fail on */
+    timeout.tv_sec = 500; /* 5 minutes */
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    switch(rc) {
+    case -1:
+      /* select error */
+      break;
+    case 0:
+      break;
+    default:
+      /* timeout or readable/writable sockets */
+      do {
+        file->m = curl_multi_perform(multi_handle, &still_running);
+
+        if(file->bytes)
+          /* we have received data, return that now */
+          break;
+
+      } while(CURLM_CALL_MULTI_PERFORM == file->m);
+
+
+      if(!still_running)
+        printf("NO MORE RUNNING AROUND!\n");
+
+      break;
+    }
+  }
+  else
+    printf("(fread) Skip network read\n");
+
+  if(file->bytes) {
+    /* data already available, return that */
+    int want = size * nmemb;
+
+    if(file->bytes < want)
+      want = file->bytes;
+
+    memcpy(ptr, file->readptr, want);
+    file->readptr += want;
+    file->bytes -= want;
+
+    printf("(fread) return %d bytes\n", want);
+
+    return want;
+  }
+  return 0; /* no data available to return */
+}
+
+
+int main(int argc, char *argv[])
+{
+  URL_FILE *handle;
+  int nread;
+  char buffer[256];
+
+  handle = url_fopen("http://www.haxx.se", "r");
+
+  if(!handle) {
+    printf("couldn't url_fopen()\n");
+  }
+
+  do {
+    nread = url_fread(buffer, sizeof(buffer), 1, handle);
+
+    printf("We got: %d bytes\n", nread);
+  } while(nread);
+
+  url_fclose(handle);
+
+  return 0;
+}

docs/examples/ftpget.c

@@ -14,31 +14,70 @@
 #include <curl/types.h>
 #include <curl/easy.h>
 
-/* to make this work under windows, use the win32-functions from the
-   win32socket.c file as well */
+/*
+ * This is an example showing how to get a single file from an FTP server.
+ * It delays the actual destination file creation until the first write
+ * callback so that it won't create an empty file in case the remote file
+ * doesn't exist or something else fails.
+ */
 
-int main(int argc, char **argv)
+struct FtpFile {
+  char *filename;
+  FILE *stream;
+};
+
+int my_fwrite(void *buffer, size_t size, size_t nmemb, void *stream)
+{
+  struct FtpFile *out=(struct FtpFile *)stream;
+  if(out && !out->stream) {
+    /* open file for writing */
+    out->stream=fopen(out->filename, "wb");
+    if(!out->stream)
+      return -1; /* failure, can't open file to write */
+  }
+  return fwrite(buffer, size, nmemb, out->stream);
+}
+
+
+int main(void)
 {
   CURL *curl;
   CURLcode res;
-  FILE *ftpfile;
-  
-  /* local file name to store the file as */
-  ftpfile = fopen("curl.tar.gz", "wb"); /* b is binary for win */
+  struct FtpFile ftpfile={
+    "curl.tar.gz", /* name to store the file as if succesful */
+    NULL
+  };
 
+  curl_global_init(CURL_GLOBAL_DEFAULT);
+  
   curl = curl_easy_init();
   if(curl) {
-    /* Get curl 7.7 from sunet.se's FTP site: */
+    /* Get curl 7.9.2 from sunet.se's FTP site: */
     curl_easy_setopt(curl, CURLOPT_URL,
-                     "ftp://ftp.sunet.se/pub/www/utilities/curl/curl-7.7.tar.gz");
-    curl_easy_setopt(curl, CURLOPT_FILE, ftpfile);
+                     "ftp://ftp.sunet.se/pub/www/utilities/curl/curl-7.9.2.tar.gz");
+    /* Define our callback to get called when there's data to be written */
+    curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, my_fwrite);
+    /* Set a pointer to our struct to pass to the callback */
+    curl_easy_setopt(curl, CURLOPT_FILE, &ftpfile);
+
+    /* Switch on full protocol/debug output */
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, TRUE);
+
     res = curl_easy_perform(curl);
 
     /* always cleanup */
     curl_easy_cleanup(curl);
+
+    if(CURLE_OK != res) {
+      /* we failed */
+      fprintf(stderr, "curl told us %d\n", res);
+    }
   }
 
-  fclose(ftpfile); /* close the local file */
+  if(ftpfile.stream)
+    fclose(ftpfile.stream); /* close the local file */
+
+  curl_global_cleanup();
 
   return 0;
 }

docs/examples/ftpgetresp.c

@@ -0,0 +1,61 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+
+#include <curl/curl.h>
+#include <curl/types.h>
+#include <curl/easy.h>
+
+/*
+ * Similar to ftpget.c but this also stores the received response-lines
+ * in a separate file using our own callback!
+ *
+ * This functionality was introduced in libcurl 7.9.3.
+ */
+
+size_t
+write_response(void *ptr, size_t size, size_t nmemb, void *data)
+{
+  FILE *writehere = (FILE *)data;
+  return fwrite(ptr, size, nmemb, writehere);
+}
+
+int main(int argc, char **argv)
+{
+  CURL *curl;
+  CURLcode res;
+  FILE *ftpfile;
+  FILE *respfile;
+  
+  /* local file name to store the file as */
+  ftpfile = fopen("ftp-list", "wb"); /* b is binary, needed on win32 */
+
+  /* local file name to store the FTP server's response lines in */
+  respfile = fopen("ftp-responses", "wb"); /* b is binary, needed on win32 */
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* Get a file listing from sunet */
+    curl_easy_setopt(curl, CURLOPT_URL, "ftp://ftp.sunet.se/");
+    curl_easy_setopt(curl, CURLOPT_FILE, ftpfile);
+    curl_easy_setopt(curl, CURLOPT_HEADERFUNCTION, write_response);
+    curl_easy_setopt(curl, CURLOPT_WRITEHEADER, respfile);
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+
+  fclose(ftpfile); /* close the local file */
+  fclose(respfile); /* close the response file */
+
+  return 0;
+}

docs/examples/http-post.c

@@ -0,0 +1,35 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* First set the URL that is about to receive our POST. This URL can
+       just as well be a https:// URL if that is what should receive the
+       data. */
+    curl_easy_setopt(curl, CURLOPT_URL, "http://postit.example.com/moo.cgi");
+    /* Now specify the POST data */
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDS, "name=daniel&project=curl");
+
+    /* Perform the request, res will get the return code */
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/examples/multi-app.c

@@ -0,0 +1,99 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This is an example application source code using the multi interface.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+/* somewhat unix-specific */
+#include <sys/time.h>
+#include <unistd.h>
+
+/* curl stuff */
+#include <curl/curl.h>
+
+/*
+ * Download a HTTP file and upload an FTP file simultaneously.
+ */
+int main(int argc, char **argv)
+{
+  CURL *http_handle;
+  CURL *ftp_handle;
+  CURLM *multi_handle;
+
+  int still_running; /* keep number of running handles */
+
+  http_handle = curl_easy_init();
+  ftp_handle  = curl_easy_init();
+
+  /* set the options (I left out a few, you'll get the point anyway) */
+  curl_easy_setopt(http_handle, CURLOPT_URL, "http://website.com");
+
+  curl_easy_setopt(ftp_handle, CURLOPT_URL, "ftp://ftpsite.com");
+  curl_easy_setopt(ftp_handle, CURLOPT_UPLOAD, TRUE);
+
+  /* init a multi stack */
+  multi_handle = curl_multi_init();
+
+  /* add the individual transfers */
+  curl_multi_add_handle(multi_handle, http_handle);
+  curl_multi_add_handle(multi_handle, ftp_handle);
+
+  /* we start some action by calling perform right away */
+  while(CURLM_CALL_MULTI_PERFORM ==
+        curl_multi_perform(multi_handle, &still_running));
+
+  while(still_running) {
+    struct timeval timeout;
+    int rc; /* select() return code */
+
+    fd_set fdread;
+    fd_set fdwrite;
+    fd_set fdexcep;
+    int maxfd;
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+
+    /* set a suitable timeout to play around with */
+    timeout.tv_sec = 1;
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    switch(rc) {
+    case -1:
+      /* select error */
+      break;
+    case 0:
+      /* timeout, do something else */
+      break;
+    default:
+      /* one or more of curl's file descriptors say there's data to read
+         or write */
+      while(CURLM_CALL_MULTI_PERFORM ==
+            curl_multi_perform(multi_handle, &still_running));
+      break;
+    }
+  }
+
+  curl_multi_cleanup(multi_handle);
+
+  curl_easy_cleanup(http_handle);
+  curl_easy_cleanup(ftp_handle);
+
+
+  return 0;
+}

docs/examples/multi-double.c

@@ -0,0 +1,95 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This is a very simple example using the multi interface.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+/* somewhat unix-specific */
+#include <sys/time.h>
+#include <unistd.h>
+
+/* curl stuff */
+#include <curl/curl.h>
+
+/*
+ * Simply download two HTTP files!
+ */
+int main(int argc, char **argv)
+{
+  CURL *http_handle;
+  CURL *http_handle2;
+  CURLM *multi_handle;
+
+  int still_running; /* keep number of running handles */
+
+  http_handle = curl_easy_init();
+  http_handle2 = curl_easy_init();
+
+  /* set options */
+  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.haxx.se/");
+
+  /* set options */
+  curl_easy_setopt(http_handle2, CURLOPT_URL, "http://localhost/");
+
+  /* init a multi stack */
+  multi_handle = curl_multi_init();
+
+  /* add the individual transfers */
+  curl_multi_add_handle(multi_handle, http_handle);
+  curl_multi_add_handle(multi_handle, http_handle2);
+
+  /* we start some action by calling perform right away */
+  while(CURLM_CALL_MULTI_PERFORM ==
+        curl_multi_perform(multi_handle, &still_running));
+
+  while(still_running) {
+    struct timeval timeout;
+    int rc; /* select() return code */
+
+    fd_set fdread;
+    fd_set fdwrite;
+    fd_set fdexcep;
+    int maxfd;
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+
+    /* set a suitable timeout to play around with */
+    timeout.tv_sec = 1;
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    switch(rc) {
+    case -1:
+      /* select error */
+      break;
+    case 0:
+    default:
+      /* timeout or readable/writable sockets */
+      while(CURLM_CALL_MULTI_PERFORM ==
+            curl_multi_perform(multi_handle, &still_running));
+      break;
+    }
+  }
+
+  curl_multi_cleanup(multi_handle);
+
+  curl_easy_cleanup(http_handle);
+  curl_easy_cleanup(http_handle2);
+
+  return 0;
+}

docs/examples/multi-post.c

@@ -0,0 +1,126 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This is an example application source code using the multi interface
+ * to do a multipart formpost without "blocking".
+ */
+#include <stdio.h>
+#include <string.h>
+#include <sys/time.h>
+
+#include <curl/curl.h>
+
+int main(int argc, char *argv[])
+{
+  CURL *curl;
+  CURLcode res;
+
+  CURLM *multi_handle;
+  int still_running;
+
+  struct HttpPost *formpost=NULL;
+  struct HttpPost *lastptr=NULL;
+  struct curl_slist *headerlist=NULL;
+  char buf[] = "Expect:";
+
+  /* Fill in the file upload field */
+  curl_formadd(&formpost,
+               &lastptr,
+               CURLFORM_COPYNAME, "sendfile",
+               CURLFORM_FILE, "postit2.c",
+               CURLFORM_END);
+
+  /* Fill in the filename field */
+  curl_formadd(&formpost,
+               &lastptr,
+               CURLFORM_COPYNAME, "filename",
+               CURLFORM_COPYCONTENTS, "postit2.c",
+               CURLFORM_END);
+
+
+  /* Fill in the submit field too, even if this is rarely needed */
+  curl_formadd(&formpost,
+               &lastptr,
+               CURLFORM_COPYNAME, "submit",
+               CURLFORM_COPYCONTENTS, "send",
+               CURLFORM_END);
+
+  curl = curl_easy_init();
+  multi_handle = curl_multi_init();
+
+  /* initalize custom header list (stating that Expect: 100-continue is not
+     wanted */
+  headerlist = curl_slist_append(headerlist, buf);
+  if(curl && multi_handle) {
+    int perform=0;
+
+    /* what URL that receives this POST */
+    curl_easy_setopt(curl, CURLOPT_URL,
+                     "http://www.fillinyoururl.com/upload.cgi");
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
+
+    curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headerlist);
+    curl_easy_setopt(curl, CURLOPT_HTTPPOST, formpost);
+
+    curl_multi_add_handle(multi_handle, curl);
+
+    while(CURLM_CALL_MULTI_PERFORM ==
+          curl_multi_perform(multi_handle, &still_running));
+
+    while(still_running) {
+      struct timeval timeout;
+      int rc; /* select() return code */
+
+      fd_set fdread;
+      fd_set fdwrite;
+      fd_set fdexcep;
+      int maxfd;
+
+      FD_ZERO(&fdread);
+      FD_ZERO(&fdwrite);
+      FD_ZERO(&fdexcep);
+
+      /* set a suitable timeout to play around with */
+      timeout.tv_sec = 1;
+      timeout.tv_usec = 0;
+
+      /* get file descriptors from the transfers */
+      curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+      rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+      switch(rc) {
+      case -1:
+        /* select error */
+        break;
+      case 0:
+        printf("timeout!\n");
+      default:
+        /* timeout or readable/writable sockets */
+        printf("perform!\n");
+        while(CURLM_CALL_MULTI_PERFORM ==
+              curl_multi_perform(multi_handle, &still_running));
+        printf("running: %d!\n", still_running);
+        break;
+      }
+    }
+
+    curl_multi_cleanup(multi_handle);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+
+    /* then cleanup the formpost chain */
+    curl_formfree(formpost);
+
+    /* free slist */
+    curl_slist_free_all (headerlist);
+  }
+  return 0;
+}

docs/examples/multi-single.c

@@ -0,0 +1,88 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This is a very simple example using the multi interface.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+/* somewhat unix-specific */
+#include <sys/time.h>
+#include <unistd.h>
+
+/* curl stuff */
+#include <curl/curl.h>
+
+/*
+ * Simply download a HTTP file.
+ */
+int main(int argc, char **argv)
+{
+  CURL *http_handle;
+  CURLM *multi_handle;
+
+  int still_running; /* keep number of running handles */
+
+  http_handle = curl_easy_init();
+
+  /* set the options (I left out a few, you'll get the point anyway) */
+  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.haxx.se/");
+
+  /* init a multi stack */
+  multi_handle = curl_multi_init();
+
+  /* add the individual transfers */
+  curl_multi_add_handle(multi_handle, http_handle);
+
+  /* we start some action by calling perform right away */
+  while(CURLM_CALL_MULTI_PERFORM ==
+        curl_multi_perform(multi_handle, &still_running));
+
+  while(still_running) {
+    struct timeval timeout;
+    int rc; /* select() return code */
+
+    fd_set fdread;
+    fd_set fdwrite;
+    fd_set fdexcep;
+    int maxfd;
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+
+    /* set a suitable timeout to play around with */
+    timeout.tv_sec = 1;
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    switch(rc) {
+    case -1:
+      /* select error */
+      break;
+    case 0:
+    default:
+      /* timeout or readable/writable sockets */
+      while(CURLM_CALL_MULTI_PERFORM ==
+            curl_multi_perform(multi_handle, &still_running));
+      break;
+    }
+  }
+
+  curl_multi_cleanup(multi_handle);
+
+  curl_easy_cleanup(http_handle);
+
+  return 0;
+}

docs/examples/post-callback.c

@@ -0,0 +1,89 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * An example source code that issues a HTTP POST and we provide the actual
+ * data through a read callback.
+ *
+ * Please be aware of the fact that the size of the posted data MUST be
+ * specified before the transfer is being made (with CURLOPT_POSTFIELDSIZE).
+ * This requirement will change when libcurl starts supporting chunked-encoded
+ * sends.
+ *
+ * This example requires libcurl 7.9.6 or later.
+ */
+#include <stdio.h>
+#include <string.h>
+#include <curl/curl.h>
+
+#if LIBCURL_VERSION_NUM < 0x070906
+#error this example source requires libcurl 7.9.6 or newer
+#endif
+
+char data[]="this is what we post to the silly web server";
+
+struct WriteThis {
+  char *readptr;
+  int sizeleft;
+};
+
+size_t read_callback(void *ptr, size_t size, size_t nmemb, void *userp)
+{
+  struct WriteThis *pooh = (struct WriteThis *)userp;
+
+  if(size*nmemb < 1)
+    return 0;
+
+  if(pooh->sizeleft) {
+    *(char *)ptr = pooh->readptr[0]; /* copy one single byte */
+    pooh->readptr++;                 /* advance pointer */
+    pooh->sizeleft--;                /* less data left */
+    return 1;                        /* we return 1 byte at a time! */
+  }
+
+  return -1;                         /* no more data left to deliver */
+}
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  struct WriteThis pooh;
+
+  pooh.readptr = data;
+  pooh.sizeleft = strlen(data);
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* First set the URL that is about to receive our POST. */
+    curl_easy_setopt(curl, CURLOPT_URL,
+                     "http://receivingsite.com.pooh/index.cgi");
+    /* Now specify we want to POST data */
+    curl_easy_setopt(curl, CURLOPT_POST, TRUE);
+
+    /* Set the expected POST size */
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, pooh.sizeleft);
+
+    /* we want to use our own read function */
+    curl_easy_setopt(curl, CURLOPT_READFUNCTION, read_callback);
+
+    /* pointer to pass to our read function */
+    curl_easy_setopt(curl, CURLOPT_INFILE, &pooh);
+
+    /* get verbose debug output please */
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
+
+    /* Perform the request, res will get the return code */
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/examples/postit.c

@@ -1,71 +0,0 @@
-/*****************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
- *                             \___|\___/|_| \_\_____|
- *
- * $Id$
- *
- * Example code that uploads a file name 'foo' to a remote script that accepts
- * "HTML form based" (as described in RFC1738) uploads using HTTP POST.
- *
- * The imaginary form we'll fill in looks like:
- *
- * <form method="post" enctype="multipart/form-data" action="examplepost.cgi">
- * Enter file: <input type="file" name="sendfile" size="40">
- * Enter file name: <input type="text" name="filename" size="30">
- * <input type="submit" value="send" name="submit">
- * </form>
- *
- * This exact source code has not been verified to work.
- */
-
-/* to make this work under windows, use the win32-functions from the
-   win32socket.c file as well */
-
-#include <stdio.h>
-
-#include <curl/curl.h>
-#include <curl/types.h>
-#include <curl/easy.h>
-
-int main(int argc, char **argv)
-{
-  CURL *curl;
-  CURLcode res;
-
-  struct HttpPost *formpost=NULL;
-  struct HttpPost *lastptr=NULL;
-
-  /* Fill in the file upload field */
-  curl_formparse("sendfile=@foo",
-                 &formpost,
-                 &lastptr);
-
-  /* Fill in the filename field */
-  curl_formparse("filename=foo",
-                 &formpost,
-                 &lastptr);
-  
-
-  /* Fill in the submit field too, even if this is rarely needed */
-  curl_formparse("submit=send",
-                 &formpost,
-                 &lastptr);
-
-  curl = curl_easy_init();
-  if(curl) {
-    /* what URL that receives this POST */
-    curl_easy_setopt(curl, CURLOPT_URL, "http://curl.haxx.se/examplepost.cgi");
-    curl_easy_setopt(curl, CURLOPT_HTTPPOST, formpost);
-    res = curl_easy_perform(curl);
-
-    /* always cleanup */
-    curl_easy_cleanup(curl);
-
-    /* then cleanup the formpost chain */
-    curl_formfree(formpost);
-  }
-  return 0;
-}

docs/examples/sepheaders.c

@@ -63,6 +63,10 @@ int main(int argc, char **argv)
   /* we want the headers to this file handle */
   curl_easy_setopt(curl_handle,   CURLOPT_WRITEHEADER ,headerfile);
 
+  /*
+   * Notice here that if you want the actual data sent anywhere else but
+   * stdout, you should consider using the CURLOPT_WRITEDATA option.  */
+
   /* get it! */
   curl_easy_perform(curl_handle);
 

docs/examples/simple.c

@@ -9,27 +9,16 @@
  */
 
 #include <stdio.h>
-
 #include <curl/curl.h>
-#include <curl/types.h>
-#include <curl/easy.h>
 
-/* to make this work under windows, use the win32-functions from the
-   win32socket.c file as well */
-
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *curl;
   CURLcode res;
-  FILE *headerfile;
-
-  headerfile = fopen("dumpit", "w");
 
   curl = curl_easy_init();
   if(curl) {
-    /* what call to write: */
     curl_easy_setopt(curl, CURLOPT_URL, "curl.haxx.se");
-    curl_easy_setopt(curl, CURLOPT_WRITEHEADER, headerfile);
     res = curl_easy_perform(curl);
 
     /* always cleanup */

docs/examples/simplepost.c

@@ -0,0 +1,36 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  char *postthis="moo mooo moo moo";
+
+  curl = curl_easy_init();
+  if(curl) {
+    curl_easy_setopt(curl, CURLOPT_URL, "http://posthere.com");
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDS, postthis);
+
+    /* if we don't provide POSTFIELDSIZE, libcurl will strlen() by
+       itself */
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, strlen(postthis));
+
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/examples/simplessl.c

@@ -28,6 +28,9 @@
    4.2. if the format of the key file is DER, set pKeyType to "DER"
 
    !! verify of the server certificate is not implemented here !!
+
+   **** This example only works with libcurl 7.9.3 and later! ****
+
 */
 
 int main(int argc, char **argv)
@@ -37,6 +40,7 @@ int main(int argc, char **argv)
   FILE *headerfile;
 
   const char *pCertFile = "testcert.pem";
+  const char *pCACertFile="cacert.pem"
 
   const char *pKeyName;
   const char *pKeyType;
@@ -62,7 +66,7 @@ int main(int argc, char **argv)
   curl = curl_easy_init();
   if(curl) {
     /* what call to write: */
-    curl_easy_setopt(curl, CURLOPT_URL, "HTTPS://curl.haxx.se");
+    curl_easy_setopt(curl, CURLOPT_URL, "HTTPS://your.favourite.ssl.site");
     curl_easy_setopt(curl, CURLOPT_WRITEHEADER, headerfile);
 
     while(1)                    /* do some ugly short cut... */
@@ -96,6 +100,10 @@ int main(int argc, char **argv)
        curl_easy_setopt(curl,CURLOPT_SSLKEYTYPE,pKeyType);
                                 /* set the private key (file or ID in engine) */
        curl_easy_setopt(curl,CURLOPT_SSLKEY,pKeyName);
+                                /* set the file with the certs vaildating the server */
+       curl_easy_setopt(curl,CURLOPT_CAINFO,pCACertFile);
+                                /* disconnect if we can't validate server's cert */
+       curl_easy_setopt(curl,CURLOPT_SSL_VERIFYPEER,1);
        
        res = curl_easy_perform(curl);
        break;                   /* we are done... */

docs/examples/win32sockets.c

@@ -1,49 +0,0 @@
-
-/*
- * Note: This is only required if you use curl 7.8 or lower, later 
- * versions provide an option to curl_global_init() that does the
- * win32 initialization for you.
- */
-
-/*
- * These are example functions doing socket init that Windows
- * require. If you don't use windows, you can safely ignore this crap.
- */
-
-#include <windows.h>
-
-void win32_cleanup(void)
-{
-  WSACleanup();
-}
-
-int win32_init(void)
-{
-  WORD wVersionRequested;  
-  WSADATA wsaData; 
-  int err; 
-  wVersionRequested = MAKEWORD(1, 1); 
-    
-  err = WSAStartup(wVersionRequested, &wsaData); 
-    
-  if (err != 0) 
-    /* Tell the user that we couldn't find a useable */ 
-    /* winsock.dll.     */ 
-    return 1;
-    
-  /* Confirm that the Windows Sockets DLL supports 1.1.*/ 
-  /* Note that if the DLL supports versions greater */ 
-  /* than 1.1 in addition to 1.1, it will still return */ 
-  /* 1.1 in wVersion since that is the version we */ 
-  /* requested. */ 
-    
-  if ( LOBYTE( wsaData.wVersion ) != 1 || 
-       HIBYTE( wsaData.wVersion ) != 1 ) { 
-    /* Tell the user that we couldn't find a useable */ 
-
-    /* winsock.dll. */ 
-    WSACleanup(); 
-    return 1; 
-  }
-  return 0; /* 0 is ok */
-}

docs/index.html

@@ -1,4 +1,4 @@
-HTML>
+<HTML>
 <HEAD>
 <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
 <TITLE>Index to Curl documentation</TITLE>
@@ -8,31 +8,14 @@ HTML>
 <H1 ALIGN="CENTER">Index to Curl documentation</H1>
 
 <H2>Programs</H2>
-<P><A HREF="curl-config.html">curl-config.html</A>
-<P><A HREF="curl.html">curl.html</A>
+<a href="curl-config.html">curl-config</A>
+<br><a href="curl.html">curl</A>
+
+<h2>Tutorial</h2>
+<a href="TheArtOfHttpScripting">The Art Of Scripting HTTP Requests Using Curl</a> (plain text)
+
+<h2>libcurl</h2>
+See the <a href="libcurl/index.html">libcurl section</a>
 
-<H2>Library routines</H2>
-<P><A HREF="libcurl.html">libcurl.html</A>
-<P><A HREF="curl_easy_cleanup.html">curl_easy_cleanup.html</A>
-<P><A HREF="curl_easy_duphandle.html">curl_easy_duphandle.html</A>
-<P><A HREF="curl_easy_getinfo.html">curl_easy_getinfo.html</A>
-<P><A HREF="curl_easy_init.html">curl_easy_init.html</A>
-<P><A HREF="curl_easy_perform.html">curl_easy_perform.html</A>
-<P><A HREF="curl_easy_setopt.html">curl_easy_setopt.html</A>
-<P><A HREF="curl_escape.html">curl_escape.html</A>
-<P><A HREF="curl_formadd.html">curl_formadd.html</A>
-<P><A HREF="curl_formfree.html">curl_formfree.html</A>
-<P><A HREF="curl_formparse.html">curl_formparse.html</A>
-<P><A HREF="curl_getdate.html">curl_getdate.html</A>
-<P><A HREF="curl_getenv.html">curl_getenv.html</A>
-<P><A HREF="curl_global_cleanup.html">curl_global_cleanup.html</A>
-<P><A HREF="curl_global_init.html">curl_global_init.html</A>
-<P><A HREF="curl_mprintf.html">curl_mprintf.html</A>
-<P><A HREF="curl_slist_append.html">curl_slist_append.html</A>
-<P><A HREF="curl_slist_free_all.html">curl_slist_free_all.html</A>
-<P><A HREF="curl_strequal.html">curl_strequal.html</A>
-<P><A HREF="curl_strnequal.html">curl_strnequal.html</A>
-<P><A HREF="curl_unescape.html">curl_unescape.html</A>
-<P><A HREF="curl_version.html">curl_version.html</A>
 </BODY>
 </HTML>

docs/libcurl/.cvsignore

@@ -0,0 +1,5 @@
+Makefile
+Makefile.in
+*html
+*ps
+*pdf

docs/libcurl/Makefile.am

@@ -0,0 +1,132 @@
+#
+# $Id$
+#
+
+AUTOMAKE_OPTIONS = foreign no-dependencies
+
+man_MANS = \
+	curl_easy_cleanup.3 \
+	curl_easy_getinfo.3 \
+	curl_easy_init.3 \
+	curl_easy_perform.3 \
+	curl_easy_setopt.3 \
+	curl_easy_duphandle.3 \
+	curl_formparse.3 \
+	curl_formadd.3 \
+	curl_formfree.3 \
+	curl_getdate.3 \
+	curl_getenv.3 \
+	curl_slist_append.3 \
+	curl_slist_free_all.3 \
+	curl_version.3 \
+	curl_version_info.3 \
+	curl_escape.3 \
+	curl_unescape.3 \
+	curl_free.3 \
+	curl_strequal.3 \
+	curl_strnequal.3 \
+	curl_mprintf.3 \
+	curl_global_init.3 \
+	curl_global_cleanup.3 \
+	libcurl.3 \
+	curl_multi_add_handle.3 \
+	curl_multi_cleanup.3 \
+	curl_multi_fdset.3 \
+	curl_multi_info_read.3 \
+	curl_multi_init.3 \
+	curl_multi_perform.3 \
+	curl_multi_remove_handle.3 \
+	libcurl-multi.3 \
+	libcurl-errors.3
+
+HTMLPAGES = \
+	curl_easy_cleanup.html \
+	curl_easy_getinfo.html \
+	curl_easy_init.html \
+	curl_easy_perform.html \
+	curl_easy_setopt.html \
+	curl_easy_duphandle.html \
+	curl_formadd.html \
+	curl_formparse.html \
+	curl_formfree.html \
+	curl_getdate.html \
+	curl_getenv.html \
+	curl_slist_append.html \
+	curl_slist_free_all.html \
+	curl_version.html \
+	curl_version_info.html \
+	curl_escape.html \
+	curl_unescape.html \
+	curl_free.html \
+	curl_strequal.html \
+	curl_strnequal.html \
+	curl_mprintf.html \
+	curl_global_init.html \
+	curl_global_cleanup.html \
+	libcurl.html \
+	curl_multi_add_handle.html \
+	curl_multi_cleanup.html \
+	curl_multi_fdset.html \
+	curl_multi_info_read.html \
+	curl_multi_init.html \
+	curl_multi_perform.html \
+	curl_multi_remove_handle.html \
+	libcurl-multi.html \
+	libcurl-errors.html \
+	index.html
+
+PDFPAGES = \
+	curl_easy_cleanup.pdf \
+	curl_easy_getinfo.pdf \
+	curl_easy_init.pdf \
+	curl_easy_perform.pdf \
+	curl_easy_setopt.pdf \
+	curl_easy_duphandle.pdf \
+	curl_formadd.pdf \
+	curl_formparse.pdf \
+	curl_formfree.pdf \
+	curl_getdate.pdf \
+	curl_getenv.pdf \
+	curl_slist_append.pdf \
+	curl_slist_free_all.pdf \
+	curl_version.pdf \
+	curl_version_info.pdf \
+	curl_escape.pdf \
+	curl_unescape.pdf \
+	curl_free.pdf \
+	curl_strequal.pdf \
+	curl_strnequal.pdf \
+	curl_mprintf.pdf \
+	curl_global_init.pdf \
+	curl_global_cleanup.pdf \
+	libcurl.pdf \
+	curl_multi_add_handle.pdf \
+	curl_multi_cleanup.pdf \
+	curl_multi_fdset.pdf \
+	curl_multi_info_read.pdf \
+	curl_multi_init.pdf \
+	curl_multi_perform.pdf \
+	curl_multi_remove_handle.pdf \
+	libcurl-multi.pdf \
+	libcurl-errors.pdf
+
+EXTRA_DIST = $(man_MANS) $(HTMLPAGES) $(PDFPAGES)
+
+MAN2HTML= gnroff -man $< | man2html >$@
+
+SUFFIXES = .1 .3 .html
+
+html: $(HTMLPAGES)
+
+.3.html:
+	$(MAN2HTML)
+
+.1.html:
+	$(MAN2HTML)
+
+pdf:
+	for file in $(man_MANS); do \
+	  foo=`echo $$file | sed -e 's/\.[0-9]$$//g'`; \
+	  groff -Tps -man $$file >$$foo.ps; \
+	  ps2pdf $$foo.ps $$foo.pdf; \
+	done

docs/libcurl/curl_easy_cleanup.3

@@ -0,0 +1,28 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_easy_cleanup 3 "13 Nov 2002" "libcurl 7.7" "libcurl Manual"
+.SH NAME
+curl_easy_cleanup - End a libcurl easy session
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "void curl_easy_cleanup(CURL *" handle ");"
+.ad
+.SH DESCRIPTION
+This function must be the last function to call for an easy session. It is the
+opposite of the \fIcurl_easy_init\fP function and must be called with the same
+\fIhandle\fP as input that the curl_easy_init call returned.
+
+This will effectively close all connections this handle has used and possibly
+has kept open until now. Don't call this function if you intend to transfer
+more files.
+
+When you've called this, you can safely remove all the strings you've
+previously told libcurl to use, as it won't use them anymore now.
+.SH RETURN VALUE
+None
+.SH "SEE ALSO"
+.BR curl_easy_init "(3), "
+

docs/libcurl/curl_easy_getinfo.3

@@ -2,7 +2,7 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH curl_easy_init 3 "5 March 2001" "libcurl 7.6.1" "libcurl Manual"
+.TH curl_easy_init 3 "25 Apr 2002" "libcurl 7.9.7" "libcurl Manual"
 .SH NAME
 curl_easy_getinfo - Extract information from a curl session (added in 7.4)
 .SH SYNOPSIS
@@ -30,13 +30,17 @@ Pass a pointer to a long to receive the last received HTTP code.
 .TP
 .B CURLINFO_FILETIME
 Pass a pointer to a long to receive the remote time of the retrieved
-document. If you get 0, it can be because of many reasons (unknown, the server
-hides it or the server doesn't support the command that tells document time
-etc) and the time of the document is unknown. (Added in 7.5)
+document. If you get -1, it can be because of many reasons (unknown, the
+server hides it or the server doesn't support the command that tells document
+time etc) and the time of the document is unknown. Note that you must tell the
+server to collect this information before the transfer is made, by using the
+CURLOPT_FILETIME option to \fIcurl_easy_setopt(3)\fP. (Added in 7.5)
 .TP
 .B CURLINFO_TOTAL_TIME
 Pass a pointer to a double to receive the total transaction time in seconds
-for the previous transfer.
+for the previous transfer. This time does not include the connect time, so if
+you want the complete operation time, you should add the
+CURLINFO_CONNECT_TIME.
 .TP
 .B CURLINFO_NAMELOOKUP_TIME
 Pass a pointer to a double to receive the time, in seconds, it took from the
@@ -58,6 +62,16 @@ start until the first byte is just about to be transfered. This includes
 CURLINFO_PRETRANSFER_TIME and also the time the server needs to calculate
 the result.
 .TP
+.B CURLINFO_REDIRECT_TIME
+Pass a pointer to a double to receive the total time, in seconds, it took for
+all redirection steps include name lookup, connect, pretransfer and transfer
+before final transaction was started. CURLINFO_REDIRECT_TIME contains the
+complete execution time for multiple redirections.  (Added in 7.9.7)
+.TP
+.B CURLINFO_REDIRECT_COUNT
+Pass a pointer to a long to receive the total number of redirections that were
+actually followed.  (Added in 7.9.7)
+.TP
 .B CURLINFO_SIZE_UPLOAD
 Pass a pointer to a double to receive the total amount of bytes that were
 uploaded.
@@ -95,8 +109,18 @@ is the value read from the Content-Length: field.  (Added in 7.6.1)
 .B CURLINFO_CONTENT_LENGTH_UPLOAD
 Pass a pointer to a double to receive the specified size of the upload.
 (Added in 7.6.1)
+.TP
+.B CURLINFO_CONTENT_TYPE
+Pass a pointer to a 'char *' to receive the content-type of the downloaded
+object. This is the value read from the Content-Type: field. If you get NULL,
+it means that the server didn't send a valid Content-Type header or that the
+protocol used doesn't support this.  (Added in 7.9.4)
+.TP
+.B CURLINFO_PRIVATE
+Pass a pointer to a 'char *' to receive the pointer to the private data
+associated with the curl handle (set with the CURLOPT_PRIVATE option to curl_easy_setopt).
+(Added in 7.10.3)
 .PP
-
 .SH RETURN VALUE
 If the operation was successful, CURLE_OK is returned. Otherwise an
 appropriate error code will be returned.

docs/libcurl/curl_easy_init.3

@@ -0,0 +1,25 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_easy_init 3 "4 March 2002" "libcurl 7.8.1" "libcurl Manual"
+.SH NAME
+curl_easy_init - Start a libcurl easy session
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "CURL *curl_easy_init( );"
+.ad
+.SH DESCRIPTION
+This function must be the first function to call, and it returns a CURL easy
+handle that you must use as input to other easy-functions. curl_easy_init
+intializes curl and this call MUST have a corresponding call to
+\fIcurl_easy_cleanup\fP when the operation is complete.
+
+.SH RETURN VALUE
+If this function returns NULL, something went wrong and you cannot use the
+other curl functions.
+.SH "SEE ALSO"
+.BR curl_easy_cleanup "(3), " curl_global_init "(3)
+.SH BUGS
+Surely there are some, you tell me!

docs/libcurl/curl_escape.3

@@ -1,28 +1,26 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_escape 3 "22 March 2001" "libcurl 7.7" "libcurl Manual"
-.SH NAME
-curl_escape - URL encodes the given string
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "char *curl_escape( char *" url ", int "length " );"
-.ad
-.SH DESCRIPTION
-This function will convert the given input string to an URL encoded string and
-return that as a new allocated string. All input characters that are not a-z,
-A-Z or 0-9 will be converted to their "URL escaped" version. If a sequence of
-%NN (where NN is a two-digit hexadecimal number) is found in the string to
-encode, that 3-letter combination will be copied to the output unmodifed,
-assuming that it is an already encoded piece of data.
-
-If the 'length' argument is set to 0, curl_escape() will use strlen() on the
-input 'url' string to find out the size.
-
-You must free() the returned string when you're done with it.
-.SH RETURN VALUE
-A pointer to a zero terminated string or NULL if it failed.
-.SH "SEE ALSO"
-.I curl_unescape(), RFC 2396
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_escape 3 "6 March 2002" "libcurl 7.9" "libcurl Manual"
+.SH NAME
+curl_escape - URL encodes the given string
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "char *curl_escape( char *" url ", int "length " );"
+.ad
+.SH DESCRIPTION
+This function will convert the given input string to an URL encoded string and
+return that as a new allocated string. All input characters that are not a-z,
+A-Z or 0-9 will be converted to their "URL escaped" version (%NN where NN is a
+two-digit hexadecimal number).
+
+If the 'length' argument is set to 0, curl_escape() will use strlen() on the
+input 'url' string to find out the size.
+
+You must curl_free() the returned string when you're done with it.
+.SH RETURN VALUE
+A pointer to a zero terminated string or NULL if it failed.
+.SH "SEE ALSO"
+.I curl_unescape(), curl_free(), RFC 2396

docs/libcurl/curl_formadd.3

@@ -0,0 +1,212 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_formadd 3 "24 June 2002" "libcurl 7.9.8" "libcurl Manual"
+.SH NAME
+curl_formadd - add a section to a multipart/formdata HTTP POST
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "CURLFORMcode curl_formadd(struct HttpPost ** " firstitem,
+.BI "struct HttpPost ** " lastitem, " ...);"
+.ad
+.SH DESCRIPTION
+curl_formadd() is used to append sections when building a multipart/formdata
+HTTP POST (sometimes refered to as rfc1867-style posts). Append one section at
+a time until you've added all the sections you want included and then you pass
+the \fIfirstitem\fP pointer as parameter to \fBCURLOPT_HTTPPOST\fP.
+\fIlastitem\fP is set after each call and on repeated invokes it should be
+left as set to allow repeated invokes to find the end of the list faster.
+
+After the \fIlastitem\fP pointer follow the real arguments.
+
+The pointers \fI*firstitem\fP and \fI*lastitem\fP should both be pointing to
+NULL in the first call to this function. All list-data will be allocated by
+the function itself. You must call \fIcurl_formfree\fP after the form post has
+been done to free the resources again.
+
+First, there are some basics you need to understand about multipart/formdata
+posts. Each part consists of at least a NAME and a CONTENTS part. If the part
+is made for file upload, there are also a stored CONTENT-TYPE and a
+FILENAME. Below here, we'll discuss on what options you use to set these
+properties in the parts you want to add to your post.
+.SH OPTIONS
+.B CURLFORM_COPYNAME
+followed by string is used to set the name of this part. libcurl copies the
+given data, so your application doesn't need to keep it around after this
+function call. If the name isn't zero terminated properly, or if you'd like it
+to contain zero bytes, you need to set the length of the name with
+\fBCURLFORM_NAMELENGTH\fP.
+
+.B CURLFORM_PTRNAME
+followed by a string is used for the name of this part. libcurl will use the
+pointer and refer to the data in your application, you must make sure it
+remains until curl no longer needs it. If the name isn't zero terminated
+properly, or if you'd like it to contain zero bytes, you need to set the
+length of the name with \fBCURLFORM_NAMELENGTH\fP.
+
+.B CURLFORM_COPYCONTENTS
+followed by a string is used for the contents of this part, the actual data to
+send away. libcurl copies the given data, so your application doesn't need to
+keep it around after this function call. If the data isn't zero terminated
+properly, or if you'd like it to contain zero bytes, you need to set the
+length of the name with \fBCURLFORM_CONTENTSLENGTH\fP.
+
+.B CURLFORM_PTRCONTENTS
+followed by a string is used for the contents of this part, the actual data to
+send away. libcurl will use the pointer and refer to the data in your
+application, you must make sure it remains until curl no longer needs it. If
+the data isn't zero terminated properly, or if you'd like it to contain zero
+bytes, you need to set the length of the name with
+\fBCURLFORM_CONTENTSLENGTH\fP.
+
+.B CURLFORM_FILECONTENT
+followed by a file name, makes that file read and the contents will be used in
+as data in this part.
+
+.B CURLFORM_FILE
+followed by a file name, makes this part a file upload part. It sets the file
+name field to the actual file name used here, it gets the contents of the file
+and passes as data and sets the content-type if the given file match one of
+the new internally known file extension.  For \fBCURLFORM_FILE\fP the user may
+send one or more files in one part by providing multiple \fBCURLFORM_FILE\fP
+arguments each followed by the filename (and each CURLFORM_FILE is allowed to
+have a CURLFORM_CONTENTTYPE).
+
+.B CURLFORM_CONTENTTYPE
+followed by a pointer to a string with a content-type will make curl use this
+given content-type for this file upload part, possibly instead of an
+internally chosen one.
+
+.B CURLFORM_FILENAME
+followed by a pointer to a string to a name, will make libcurl use the given
+name in the file upload part, intead of the actual file name given to
+\fICURLFORM_FILE\fP.
+
+.B BCURLFORM_BUFFER
+followed by a string, tells libcurl that a buffer is to be used to upload data
+instead of using a file. The given string is used as the value of the file
+name field in the content header.
+
+.B CURLFORM_BUFFERPTR
+followed by a pointer to a data area, tells libcurl the address of the buffer
+containing data to upload (as indicated with \fICURLFORM_BUFFER\fP). The
+buffer containing this data must not be freed until after curl_easy_cleanup is
+called.
+
+.B CURLFORM_BUFFERLENGTH
+followed by a long with the size of the \fICURLFORM_BUFFERPTR\fP data area,
+tells libcurl the length of the buffer to upload.
+
+.B CURLFORM_ARRAY
+Another possibility to send options to curl_formadd() is the
+\fBCURLFORM_ARRAY\fP option, that passes a struct curl_forms array pointer as
+its value. Each curl_forms structure element has a CURLformoption and a char
+pointer. The final element in the array must be a CURLFORM_END. All available
+options can be used in an array, except the CURLFORM_ARRAY option itself!  The
+last argument in such an array must always be \fBCURLFORM_END\fP.
+
+.B CURLFORM_CONTENTHEADER
+specifies extra headers for the form POST section.  This takes a curl_slist
+prepared in the usual way using \fBcurl_slist_append\fP and appends the list
+of headers to those libcurl automatically generates. The list must exist while
+the POST occurs, if you free it before the post completes you may experience
+problems.
+
+When you've passed the HttpPost pointer to \fIcurl_easy_setopt\fP (using the
+\fICURLOPT_HTTPPOST\fP option), you must not free the list until after you've
+called \fIcurl_easy_cleanup\fP for the curl handle.
+
+See example below.
+.SH RETURN VALUE
+0 means everything was ok, non-zero means an error occurred as
+.I <curl/curl.h>
+defines.
+.SH EXAMPLE
+.nf
+
+ struct HttpPost* post = NULL;
+ struct HttpPost* last = NULL;
+ char namebuffer[] = "name buffer";
+ long namelength = strlen(namebuffer);
+ char buffer[] = "test buffer";
+ char htmlbuffer[] = "<HTML>test buffer</HTML>";
+ long htmlbufferlength = strlen(htmlbuffer);
+ struct curl_forms forms[3];
+ char file1[] = "my-face.jpg";
+ char file2[] = "your-face.jpg";
+ /* add null character into htmlbuffer, to demonstrate that
+    transfers of buffers containing null characters actually work
+ */
+ htmlbuffer[8] = '\\0';
+
+ /* Add simple name/content section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "name",
+              CURLFORM_COPYCONTENTS, "content", CURLFORM_END); 
+
+ /* Add simple name/content/contenttype section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "htmlcode",
+              CURLFORM_COPYCONTENTS, "<HTML></HTML>",
+              CURLFORM_CONTENTTYPE, "text/html", CURLFORM_END);
+
+ /* Add name/ptrcontent section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "name_for_ptrcontent",
+              CURLFORM_PTRCONTENTS, buffer, CURLFORM_END);
+
+ /* Add ptrname/ptrcontent section */
+ curl_formadd(&post, &last, CURLFORM_PTRNAME, namebuffer,
+	      CURLFORM_PTRCONTENTS, buffer, CURLFORM_NAMELENGTH,
+	      namelength, CURLFORM_END);
+
+ /* Add name/ptrcontent/contenttype section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "html_code_with_hole",
+              CURLFORM_PTRCONTENTS, htmlbuffer,
+              CURLFORM_CONTENTSLENGTH, htmlbufferlength,
+              CURLFORM_CONTENTTYPE, "text/html", CURLFORM_END);
+
+ /* Add simple file section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "picture",
+              CURLFORM_FILE, "my-face.jpg", CURLFORM_END);
+
+ /* Add file/contenttype section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "picture",
+              CURLFORM_FILE, "my-face.jpg",
+              CURLFORM_CONTENTTYPE, "image/jpeg", CURLFORM_END);
+
+ /* Add two file section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "pictures",
+              CURLFORM_FILE, "my-face.jpg",
+              CURLFORM_FILE, "your-face.jpg", CURLFORM_END);
+
+ /* Add two file section using CURLFORM_ARRAY */
+ forms[0].option = CURLFORM_FILE;
+ forms[0].value  = file1;
+ forms[1].option = CURLFORM_FILE;
+ forms[1].value  = file2;
+ forms[2].option  = CURLFORM_END;
+
+ /* Add a buffer to upload */
+ curl_formadd(&post, &last,
+              CURLFORM_COPYNAME, "name",
+              CURLFORM_BUFFER, "data",
+              CURLFORM_BUFFERPTR, record,
+              CURLFORM_BUFFERLENGTH, record_length,
+              CURLFORM_END);
+
+ /* no option needed for the end marker */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "pictures",
+              CURLFORM_ARRAY, forms, CURLFORM_END);
+ /* Add the content of a file as a normal post text value */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "filecontent",
+              CURLFORM_FILECONTENT, ".bashrc", CURLFORM_END);
+ /* Set the form info */
+ curl_easy_setopt(curl, CURLOPT_HTTPPOST, post);
+
+.SH "SEE ALSO"
+.BR curl_easy_setopt "(3), "
+.BR curl_formparse "(3) [deprecated], "
+.BR curl_formfree "(3)"
+.SH BUGS
+Surely there are some, you tell me!
+

docs/libcurl/curl_free.3

@@ -0,0 +1,17 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id: 
+.\"
+.TH curl_free 3 "24 Sept 2002" "libcurl 7.10" "libcurl Manual"
+.SH NAME
+curl_free - reclaim memory that has been obtained through a libcurl call
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "void *curl_free( char *" ptr " );"
+.ad
+.SH DESCRIPTION
+curl_free reclaims memory that has been obtained through a libcurl call. 
+Use curl_free() instead of free() to avoid anomalies that can result from differences in memory management between your application and libcurl.
+.SH "SEE ALSO"
+.I curl_unescape(), curl_free()

docs/libcurl/curl_multi_add_handle.3

@@ -0,0 +1,20 @@
+.\" $Id$
+.\"
+.TH curl_multi_add_handle 3 "4 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_add_handle - add an easy handle to a multi session
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLMcode curl_multi_add_handle(CURLM *multi_handle, CURL *easy_handle);
+.ad
+.SH DESCRIPTION
+Adds a standard easy handle to the multi stack. This will make this multi
+handle control the specified easy handle.
+
+When an easy handle has been added to a multi stack, you can not and you must
+not use curl_easy_perform() on that handle!
+.SH RETURN VALUE
+CURLMcode type, general libcurl multi interface error code.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_multi_init "(3)"

docs/libcurl/curl_multi_cleanup.3

@@ -0,0 +1,18 @@
+.\" $Id$
+.\"
+.TH curl_multi_cleanup 3 "1 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_cleanup - close down a multi session
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "CURLMcode curl_multi_cleanup( CURLM *multi_handle );"
+.ad
+.SH DESCRIPTION
+Cleans up and removes a whole multi stack. It does not free or touch any
+individual easy handles in any way - they still need to be closed
+individually, using the usual curl_easy_cleanup() way.
+.SH RETURN VALUE
+CURLMcode type, general libcurl multi interface error code.
+.SH "SEE ALSO"
+.BR curl_multi_init "(3)," curl_easy_cleanup "(3)," curl_easy_init "(3)"

docs/libcurl/curl_multi_fdset.3

@@ -0,0 +1,27 @@
+.\" $Id$
+.\"
+.TH curl_multi_fdset 3 "3 May 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_fdset - extracts file descriptor information from a multi handle
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLMcode curl_multi_fdset(CURLM *multi_handle,
+                           fd_set *read_fd_set,
+                           fd_set *write_fd_set,
+                           fd_set *exc_fd_set,
+                           int *max_fd);
+.ad
+.SH DESCRIPTION
+This function extracts file descriptor information from a given multi_handle.
+libcurl returns its fd_set sets. The application can use these to select() or
+poll() on. The curl_multi_perform() function should be called as soon as one
+of them are ready to be read from or written to.
+
+NOTE that once this call is made, you must not remove the sets you point to,
+as libcurl will need to be able to read them. It needs them after select()
+calls, to know if certain sockets are readable or writable.
+.SH RETURN VALUE
+CURLMcode type, general libcurl multi interface error code.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_multi_init "(3)"

docs/libcurl/curl_multi_info_read.3

@@ -0,0 +1,35 @@
+.\" $Id$
+.\"
+.TH curl_multi_info_read 3 "1 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_info_read - read multi stack informationals
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLMsg *curl_multi_info_read( CURLM *multi_handle,
+                               int *msgs_in_queue);
+.ad
+.SH DESCRIPTION
+Ask the multi handle if there's any messages/informationals from the
+individual transfers. Messages include informationals such as an error code
+from the transfer or just the fact that a transfer is completed. More details
+on these should be written down as well.
+
+Repeated calls to this function will return a new struct each time, until a
+special "end of msgs" struct is returned as a signal that there is no more to
+get at this point. The integer pointed to with \fImsgs_in_queue\fP will
+contain the number of remaining messages after this function was called.
+
+The data the returned pointer points to will not survive calling
+curl_multi_cleanup().
+
+The 'CURLMsg' struct is very simple and only contain very basic informations.
+If more involved information is wanted, the particular "easy handle" in
+present in that struct and can thus be used in subsequent regular
+curl_easy_getinfo() calls (or similar).
+.SH "RETURN VALUE"
+A pointer to a filled-in struct, or NULL if it failed or ran out of
+structs. It also writes the number of messages left in the queue (after this
+read) in the integer the second argument points to.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_multi_init "(3)," curl_multi_perform "(3)"

docs/libcurl/curl_multi_init.3

@@ -0,0 +1,22 @@
+.\" $Id$
+.\"
+.TH curl_multi_init 3 "1 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_init - Start a multi session
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "CURLM *curl_multi_init( );"
+.ad
+.SH DESCRIPTION
+This function returns a CURLM handle to be used as input to all the other
+multi-functions, sometimes refered to as a multi handle on some places in the
+documentation. This init call MUST have a corresponding call to
+\fIcurl_multi_cleanup\fP when the operation is complete.
+.SH RETURN VALUE
+If this function returns NULL, something went wrong and you cannot use the
+other curl functions.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_global_init "(3)," curl_easy_init "(3)"
+.SH BUGS
+Surely there are some, you tell me!

docs/libcurl/curl_multi_perform.3

@@ -0,0 +1,36 @@
+.\" $Id$
+.\"
+.TH curl_multi_perform 3 "1 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_perform - reads/writes available data from each easy handle
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles);
+.ad
+.SH DESCRIPTION
+When the app thinks there's data available for the multi_handle, it should
+call this function to read/write whatever there is to read or write right
+now. curl_multi_perform() returns as soon as the reads/writes are done. This
+function does not require that there actually is any data available for
+reading or that data can be written, it can be called just in case. It will
+write the number of handles that still transfer data in the second argument's
+integer-pointer.
+.SH "RETURN VALUE"
+CURLMcode type, general libcurl multi interface error code.
+
+If you receive \fICURLM_CALL_MULTI_PERFORM\fP, this basicly means that you
+should call \fIcurl_multi_perform\fP again, before you select() on more
+actions. You don't have to do it immediately, but the return code means that
+libcurl may have more data available to return or that there may be more data
+to send off before it is "satisfied".
+
+NOTE that this only returns errors etc regarding the whole multi stack. There
+might still have occurred problems on invidual transfers even when this
+function returns OK.
+.SH "TYPICAL USAGE"
+Most application will use \fIcurl_multi_fdset\fP to get the multi_handle's
+file descriptors, then it'll wait for action on them using select() and as
+soon as one or more of them are ready, \fIcurl_multi_perform\fP gets called.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_multi_init "(3)"

docs/libcurl/curl_multi_remove_handle.3

@@ -0,0 +1,20 @@
+.\" $Id$
+.\"
+.TH curl_multi_remove_handle 3 "6 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_remove_handle - remove an easy handle from a multi session
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLMcode curl_multi_remove_handle(CURLM *multi_handle, CURL *easy_handle);
+.ad
+.SH DESCRIPTION
+Removes a given easy_handle from the multi_handle. This will make the
+specified easy handle be removed from this multi handle's control.
+
+When the easy handle has been removed from a multi stack, it is again
+perfectly legal to invoke \fIcurl_easy_perform()\fP on this easy handle.
+.SH RETURN VALUE
+CURLMcode type, general libcurl multi interface error code.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_multi_init "(3)"

docs/libcurl/curl_unescape.3

@@ -1,27 +1,27 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_unescape 3 "22 March 2001" "libcurl 7.7" "libcurl Manual"
-.SH NAME
-curl_unescape - URL decodes the given string
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "char *curl_unescape( char *" url ", int "length " );"
-.ad
-.SH DESCRIPTION
-This function will convert the given URL encoded input string to a "plain
-string" and return that as a new allocated string. All input characters that
-are URL encoded (%XX where XX is a two-digit hexadecimal number, or +) will be
-converted to their plain text versions (up to a ? letter, no letters to the
-right of a ? letter will be converted).
-
-If the 'length' argument is set to 0, curl_unescape() will use strlen() on the
-input 'url' string to find out the size.
-
-You must free() the returned string when you're done with it.
-.SH RETURN VALUE
-A pointer to a zero terminated string or NULL if it failed.
-.SH "SEE ALSO"
-.I curl_escape(), RFC 2396
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_unescape 3 "22 March 2001" "libcurl 7.7" "libcurl Manual"
+.SH NAME
+curl_unescape - URL decodes the given string
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "char *curl_unescape( char *" url ", int "length " );"
+.ad
+.SH DESCRIPTION
+This function will convert the given URL encoded input string to a "plain
+string" and return that as a new allocated string. All input characters that
+are URL encoded (%XX where XX is a two-digit hexadecimal number, or +) will be
+converted to their plain text versions (up to a ? letter, no + letters to the
+right of a ? letter will be converted).
+
+If the 'length' argument is set to 0, curl_unescape() will use strlen() on the
+input 'url' string to find out the size.
+
+You must curl_free() the returned string when you're done with it.
+.SH RETURN VALUE
+A pointer to a zero terminated string or NULL if it failed.
+.SH "SEE ALSO"
+.I curl_escape(), curl_free(), RFC 2396

docs/libcurl/curl_version_info.3

@@ -0,0 +1,93 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_version_info 3 "30 Sep 2002" "libcurl 7.10" "libcurl Manual"
+.SH NAME
+curl_version_info - returns run-time libcurl version info
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "curl_version_info_data *curl_version_info( CURLversion "type ");"
+.ad
+.SH DESCRIPTION
+Returns a pointer to a filled in struct with information about various
+run-time features in libcurl. \fItype\fP should be set to the version of this
+functionality by the time you write your program. This way, libcurl will
+always return a proper struct that your program understands, while programs in
+the future might get an different struct. CURLVERSION_NOW will be the most
+recent one for the library you have installed:
+
+        data = curl_version_info(CURLVERSION_NOW);
+
+Applications should use this information to judge if things are possible to do
+or not, instead of using compile-time checks, as dynamic/DLL libraries can be
+changed independent of applications.
+
+The curl_version_info_data struct looks like this
+
+.nf
+typedef struct {
+  CURLversion age;          /* 0 - this kind of struct */
+  const char *version;      /* human readable string */
+  unsigned int version_num; /* numeric representation */
+  const char *host;         /* human readable string */
+  int features;             /* bitmask, see below */
+  char *ssl_version;        /* human readable string */
+  long ssl_version_num;     /* number */
+  char *libz_version;       /* human readable string */
+  const char *protocols[];  /* list of protocols */
+} curl_version_info_data;
+.fi
+
+\fIage\fP describes what kind of struct this is. It is always 0 now. In a
+future libcurl, if this struct changes, this age counter may be increased, and
+then the struct for number 1 will look different (except for this first struct
+field).
+
+\fIversion\fP is just an ascii string for the libcurl version.
+
+\fIversion_num\fP is a 6 digit hexadecimal number created like this: <2 digits
+major number> | <2 digits minor number> | <2 digits patch number>. Version
+7.9.8 is therefore returned as 0x070908.
+
+\fIhost\fP is an ascii string showing what host information that this libcurl
+was built for. As discovered by a configure script or set by the build
+environment.
+
+\fIfeatures\fP can have none, one or more bits set, and the currently defined
+bits are:
+.TP 5.5
+.B CURL_VERSION_IPV6
+supports IPv6
+.TP
+.B CURL_VERSION_KERBEROS4
+supports kerberos4 (when using FTP)
+.TP
+.B CURL_VERSION_SSL
+supports SSL (HTTPS/FTPS)
+.TP
+.B CURL_VERSION_LIBZ
+supports HTTP deflate using libz
+.PP
+\fIssl_version\fP is an ascii string for the OpenSSL version used. If libcurl
+has no SSL support, this is NULL.
+
+\fIssl_version_num\fP is the numerical OpenSSL version value as defined by the
+OpenSSL project. If libcurl has no SSL support, this is 0.
+
+\fIlibz_version\fP is an ascii string (there is no numerical version). If
+libcurl has no libz support, this is NULL.
+
+\fIprotocols\fP is a pointer to an array of char * pointers, containing the
+names protocols that libcurl supports (using lowercase letters). The protocol
+names are the same as would be used in URLs. The array is terminated by a NULL
+entry.
+
+
+.SH RETURN VALUE
+A pointer to a curl_version_info_data struct.
+.SH "SEE ALSO"
+\fIcurl_version(3)\fP
+.SH BUGS
+No known bugs.

docs/libcurl/index.html

@@ -0,0 +1,52 @@
+<HTML>
+<HEAD>
+<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
+<TITLE>Index to libcurl documentation</TITLE>
+</HEAD>
+
+<BODY>
+<H1 ALIGN="CENTER">Index to libcurl documentation</H1>
+
+<H2>Programs</H2>
+<P><A HREF="../index.html">curl and tools</A>
+
+<h2>Overviews</h2>
+<A HREF="libcurl.html">libcurl</A>
+<br><a href="libcurl-multi.html">libcurl-multi</a>
+<br><a href="libcurl-errors.html">libcurl-errors</a>
+<br><a href="../libcurl-the-guide">libcurl-the-guide</a> (plain text)
+
+<H2>Library Functions (A-Z)</H2>
+<a href="curl_easy_cleanup.html">curl_easy_cleanup</A>
+<br><a href="curl_easy_duphandle.html">curl_easy_duphandle</A>
+<br><a href="curl_easy_getinfo.html">curl_easy_getinfo</A>
+<br><a href="curl_easy_init.html">curl_easy_init</A>
+<br><a href="curl_easy_perform.html">curl_easy_perform</A>
+<br><a href="curl_easy_setopt.html">curl_easy_setopt</A>
+<br><a href="curl_escape.html">curl_escape</A>
+<br><a href="curl_formadd.html">curl_formadd</A>
+<br><a href="curl_formfree.html">curl_formfree</A>
+<br><a href="curl_formparse.html">curl_formparse</A>
+<br><a href="curl_free.html">curl_free</A>
+<br><a href="curl_getdate.html">curl_getdate</A>
+<br><a href="curl_getenv.html">curl_getenv</A>
+<br><a href="curl_global_cleanup.html">curl_global_cleanup</A>
+<br><a href="curl_global_init.html">curl_global_init</A>
+<br><a href="curl_mprintf.html">curl_mprintf</A>
+<br><a href="curl_multi_add_handle.html">curl_multi_add_handle</a>
+<br><a href="curl_multi_cleanup.html">curl_multi_cleanup</a>
+<br><a href="curl_multi_fdset.html">curl_multi_fdset</a>
+<br><a href="curl_multi_info_read.html">curl_multi_info_read</a>
+<br><a href="curl_multi_init.html">curl_multi_init</a>
+<br><a href="curl_multi_perform.html">curl_multi_perform</a>
+<br><a href="curl_multi_remove_handle.html">curl_multi_remove_handle</a>
+<br><a href="curl_slist_append.html">curl_slist_append</A>
+<br><a href="curl_slist_free_all.html">curl_slist_free_all</A>
+<br><a href="curl_strequal.html">curl_strequal</A>
+<br><a href="curl_strnequal.html">curl_strnequal</A>
+<br><a href="curl_unescape.html">curl_unescape</A>
+<br><a href="curl_version.html">curl_version</A>
+<br><a href="curl_version_info.html">curl_version_info</A>
+
+</BODY>
+</HTML>

docs/libcurl/libcurl-errors.3

@@ -0,0 +1,240 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH libcurl-errors 3 "18 Dec 2002" "libcurl 7.10.3" "libcurl errors"
+.SH NAME
+error codes in libcurl
+.SH DESCRIPTION
+This man page includes most, if not all, available error codes in libcurl.
+Why they occur and possibly what you can do to fix the problem.
+.SH "CURLcode"
+Almost all "easy" interface functions return a CURLcode error code. No matter
+what, using \fICURLOPT_ERRORBUFFER\fP is a good idea as it will give you a
+human readable error string that may offer more details about the error cause
+than just the error code does.
+
+This man page is meant to describe libcurl 7.9.6 and later. Earlier versions
+might have had quirks not mentioned here.
+
+CURLcode is one of the following:
+.RS 1
+.TP 5
+.B CURLE_OK (0)
+All fine. Proceed as usual.
+.TP
+.B CURLE_UNSUPPORTED_PROTOCOL (1)
+The URL you passed to libcurl used a protocol that this libcurl does not
+support. The support might be a compile-time option that you didn't use, it
+can be a misspelled protocol string or just a protocol libcurl has no code
+for.
+.TP
+.B CURLE_FAILED_INIT (2)
+Very early initialization code failed. This is likely to be an internal error
+or problem.
+.TP
+.B CURLE_URL_MALFORMAT (3)
+The URL was not properly formatted.
+.TP
+.B CURLE_URL_MALFORMAT_USER (4)
+URL user malformatted. The user-part of the URL syntax was not correct.
+.TP
+.B CURLE_COULDNT_RESOLVE_PROXY (5)
+Couldn't resolve proxy. The given proxy host could not be resolved.
+.TP
+.B CURLE_COULDNT_RESOLVE_HOST (6)
+Couldn't resolve host. The given remote host was not resolved.
+.TP
+.B CURLE_COULDNT_CONNECT (7)
+Failed to connect() to host or proxy.
+.TP
+.B CURLE_FTP_WEIRD_SERVER_REPLY (8)
+After connecting to a FTP server, libcurl expects to get a certain reply back.
+This error code implies that it god a strange or bad reply. The given remote
+server is probably not an OK FTP server.
+.TP
+.B CURLE_FTP_ACCESS_DENIED (9)
+We were denied access when trying to login to an FTP server or when trying to
+change working directory to the one given in the URL.
+.TP
+.B CURLE_FTP_USER_PASSWORD_INCORRECT (10)
+The username and/or the password were incorrect when trying to login to an FTP
+server.
+.TP
+.B CURLE_FTP_WEIRD_PASS_REPLY (11)
+After having sent the FTP password to the server, libcurl expects a proper
+reply. This error code indicates that an unexpected code was returned.
+.TP
+.B CURLE_FTP_WEIRD_USER_REPLY (12)
+After having sent user name to the FTP server, libcurl expects a proper
+reply. This error code indicates that an unexpected code was returned.
+.TP
+.B CURLE_FTP_WEIRD_PASV_REPLY (13)
+libcurl failed to get a sensible result back from the server as a response to
+either a PASV or a EPSV command. The server is flawed.
+.TP
+.B CURLE_FTP_WEIRD_227_FORMAT (14)
+FTP servers return a 227-line as a response to a PASV command. If libcurl
+fails to parse that line, this return code is passed back.
+.TP
+.B CURLE_FTP_CANT_GET_HOST (15)
+An internal failure to lookup the host used for the new connection.
+.TP
+.B CURLE_FTP_CANT_RECONNECT (16)
+A bad return code on either PASV or EPSV was sent by the FTP server,
+preventing libcurl from being able to continue.
+.TP
+.B CURLE_FTP_COULDNT_SET_BINARY (17)
+Received an error when trying to set the transfer mode to binary.
+.TP
+.B CURLE_PARTIAL_FILE (18)
+A file transfer was shorter or larger than expected. This happens when the
+server first reports an expected transfer size, and then delivers data that
+doesn't match the previously given size.
+.TP
+.B CURLE_FTP_COULDNT_RETR_FILE (19)
+This was either a weird reply to a 'RETR' command or a zero byte transfer
+complete.
+.TP
+.B CURLE_FTP_WRITE_ERROR (20)
+After a completed file transfer, the FTP server did not respond a proper
+\"transfer successful\" code.
+.TP
+.B CURLE_FTP_QUOTE_ERROR (21)
+When sending custom "QUOTE" commands to the remote server, one of the commands
+returned an error code that was 400 or higher.
+.TP
+.B CURLE_HTTP_RETURNED_ERROR (22)
+This is returned if CURLOPT_FAILONERROR is set TRUE and the HTTP server
+returns an error code that is >= 400.
+.TP
+.B CURLE_WRITE_ERROR (23)
+An error occurred when writing received data to a local file, or an error was
+returned to libcurl from a write callback.
+.TP
+.B CURLE_MALFORMAT_USER (24)
+Malformat user. User name badly specified. *Not currently used*
+.TP
+.B CURLE_FTP_COULDNT_STOR_FILE (25)
+FTP couldn't STOR file. The server denied the STOR operation. The error buffer
+usually contains the server's explanation to this.
+.TP
+.B CURLE_READ_ERROR (26)
+There was a problem reading a local file or an error returned by the read
+callback.
+.TP
+.B CURLE_OUT_OF_MEMORY (27)
+Out of memory. A memory allocation request failed. This is serious badness and
+things are severly screwed up if this ever occur.
+.TP
+.B CURLE_OPERATION_TIMEOUTED (28)
+Operation timeout. The specified time-out period was reached according to the
+conditions.
+.TP
+.B CURLE_FTP_COULDNT_SET_ASCII (29)
+libcurl failed to set ASCII transfer type (TYPE A).
+.TP
+.B CURLE_FTP_PORT_FAILED (30)
+The FTP PORT command returned error. This mostly happen when you haven't
+specified a good enough address for libcurl to use. See \fICURLOPT_FTPPORT\fP.
+.TP
+.B CURLE_FTP_COULDNT_USE_REST (31)
+The FTP REST command returned error. This should never happen if the server is
+sane.
+.TP
+.B CURLE_FTP_COULDNT_GET_SIZE (32)
+The FTP SIZE command returned errror. SIZE is not a kosher FTP command, it is
+an extension and not all servers support it. This is not a surprising error.
+.TP
+.B CURLE_HTTP_RANGE_ERROR (33)
+The HTTP server does not support or accept range requests.
+.TP
+.B CURLE_HTTP_POST_ERROR (34)
+This is an odd error that mainly occurs due to internal confusion.
+.TP
+.B CURLE_SSL_CONNECT_ERROR (35)
+A problem occured somewhere in the SSL/TLS handshake. You really want the
+error buffer and read the message there as it pinpoints the problem slightly
+more. Could be certificates (file formats, paths, permissions), passwords, and
+others.
+.TP
+.B CURLE_FTP_BAD_DOWNLOAD_RESUME (36)
+Attempting FTP resume beyond file size.
+.TP
+.B CURLE_FILE_COULDNT_READ_FILE (37)
+A file given with FILE:// couldn't be opened. Most likely because the file
+path doesn't identify an existing file. Did you check file permissions?
+.TP
+.B CURLE_LDAP_CANNOT_BIND (38)
+LDAP cannot bind. LDAP bind operation failed.
+.TP
+.B CURLE_LDAP_SEARCH_FAILED (39)
+LDAP search failed.
+.TP
+.B CURLE_LIBRARY_NOT_FOUND (40)
+Library not found. The LDAP library was not found.
+.TP
+.B CURLE_FUNCTION_NOT_FOUND (41)
+Function not found. A required LDAP function was not found.
+.TP
+.B CURLE_ABORTED_BY_CALLBACK (42)
+Aborted by callback. A callback returned "abort" to libcurl.
+.TP
+.B CURLE_BAD_FUNCTION_ARGUMENT (43)
+Internal error. A function was called with a bad parameter.
+.TP
+.B CURLE_BAD_CALLING_ORDER (44)
+Internal error. A function was called in a bad order.
+.TP
+.B CURLE_HTTP_PORT_FAILED (45)
+Interface error. A specified outgoing interface could not be used. Set which
+interface to use for outgoing connections' source IP address with
+CURLOPT_INTERFACE.
+.TP
+.B CURLE_BAD_PASSWORD_ENTERED (46)
+Bad password entered. An error was signaled when the password was
+entered. This can also be the result of a "bad password" returned from a
+specified password callback.
+.TP
+.B CURLE_TOO_MANY_REDIRECTS (47)
+Too many redirects. When following redirects, libcurl hit the maximum amount.
+Set your limit with CURLOPT_MAXREDIRS.
+.TP
+.B CURLE_UNKNOWN_TELNET_OPTION (48)
+An option set with CURLOPT_TELNETOPTIONS was not recognized/known. Refer to
+the appropriate documentation.
+.TP
+.B CURLE_TELNET_OPTION_SYNTAX (49)
+A telnet option string was Illegally formatted.
+.TP
+.B CURLE_OBSOLETE (50)
+This is not an error. This used to be another error code in an old libcurl
+version and is currently unused.
+.TP
+.B CURLE_SSL_PEER_CERTIFICATE (51)
+The remote server's SSL certificate was deemed not OK.
+.TP
+.B CURLE_GOT_NOTHING (52)
+Nothing was returned from the server, and under the circumstances, getting
+nothing is considered an error.
+.TP
+.B CURLE_SSL_ENGINE_NOTFOUND (53)
+The specified crypto engine wasn't found.
+.TP
+.B CURLE_SSL_ENGINE_SETFAILED (54)
+Failed setting the selected SSL crypto engine as default!
+.TP
+.B CURLE_SEND_ERROR (55)
+Failed sending network data.
+.TP
+.B CURLE_RECV_ERROR (56)
+Failure with receiving network data.
+.TP
+.B CURL_LAST
+This is not an error, but in the curl/curl.h file this can be used to know how
+many existing error codes there are.
+.RE
+
+.SH "CURLMcode"
+This is the generic return code used by functions in the libcurl multi
+interface.

docs/libcurl/libcurl-multi.3

@@ -0,0 +1,100 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH libcurl-multi 5 "13 Oct 2001" "libcurl 7.10.1" "libcurl multi interface"
+.SH NAME
+libcurl-multi \- how to use the multi interface
+.SH DESCRIPTION
+This is an overview on how to use the libcurl multi interface in your C
+programs. There are specific man pages for each function mentioned in
+here. There's also the libcurl-the-guide document for a complete tutorial to
+programming with libcurl and the \fIlibcurl(3)\fP man page for an overview of
+the libcurl easy interface.
+
+All functions in the multi interface are prefixed with curl_multi.
+.SH "PLEASE NOTICE"
+The multi interface is a rather new member of the libcurl family. It has not
+yet been very widely used. It may still be a few more bugs lurking in there
+than we are used to. That said, it might also just work in every aspect you
+try it. Please report all bugs and oddities you see.
+.SH "OBJECTIVES"
+The multi interface introduces several new abilities that the easy interface
+refuses to offer. They are mainly:
+
+1. Enable a "pull" interface. The application that uses libcurl decides where
+and when to ask libcurl to get/send data.
+
+2. Enable multiple simultaneous transfers in the same thread without making it
+complicated for the application.
+
+3. Enable the application to select() on its own file descriptors and curl's
+file descriptors simultaneous easily.
+.SH "ONE MULTI HANDLE MANY EASY HANDLES"
+To use the multi interface, you must first create a 'multi handle' with
+\fIcurl_multi_init\fP. This handle is then used as input to all further
+curl_multi_* functions.
+
+Each single transfer is built up with an easy handle. You must create them,
+and setup the appropriate options for each easy handle, as outlined in the
+\fIlibcurl(3)\fP man page, using \fIcurl_easy_setopt(3)\fP.
+
+When the easy handle is setup for a transfer, then instead of using
+\fIcurl_easy_perform\fP (as when using the easy interface for transfers), you
+should instead add the easy handle to the multi handle using
+\fIcurl_easy_add_handl\fP. The multi handle is sometimes referred to as a
+\'multi stack\' because of the fact that it may hold a large amount of easy
+handles.
+
+Should you change your mind, the easy handle is again removed from the multi
+stack using \fIcurl_multi_remove_handle\fP. Once removed from the multi
+handle, you can again use other easy interface functions like
+\fIcurl_easy_perform\fP on the handle or whatever you think is necessary.
+
+Adding the easy handle to the multi handle does not start the transfer.
+Remember that one of the main ideas with this interface is to let your
+application drive. You drive the transfers by invoking
+\fIcurl_multi_perform\fP. libcurl will then transfer data if there is anything
+available to transfer. It'll use the callbacks and everything else you have
+setup in the individual easy handles. It'll transfer data on all current
+transfers in the multi stack that are ready to transfer anything. It may be
+all, it may be none.
+
+Your application can acquire knowledge from libcurl when it would like to get
+invoked to transfer data, so that you don't have to busy-loop and call that
+\fIcurl_multi_perform\fP like crazy. \fIcurl_multi_fdset\fP offers an
+interface using which you can extract fd_sets from libcurl to use in select()
+or poll() calls in order to get to know when the transfers in the multi stack
+might need attention. This also makes it very easy for your program to wait
+for input on your own private file descriptors at the same time or perhaps
+timeout every now and then, should you want that.
+
+A little note here about the return codes from the multi functions, and
+especially the \fIcurl_multi_perform\fP: if you receive
+\fICURLM_CALL_MULTI_PERFORM\fP, this basicly means that you should call
+\fIcurl_multi_perform\fP again, before you select() on more actions. You don't
+have to do it immediately, but the return code means that libcurl may have
+more data available to return or that there may be more data to send off
+before it is "satisfied".
+
+\fIcurl_multi_perform\fP stores the number of still running transfers in one
+of its input arguments, and by reading that you can figure out when all the
+transfers in the multi handles are done. 'done' does not mean successful. One
+or more of the transfers may have failed. Tracking when this number changes,
+you know when one or more transfers are done.
+
+To get information about completed transfers, to figure out success or not and
+similar, \fIcurl_multi_info_read\fP should be called. It can return a message
+about a current or previous transfer. Repeated invokes of the function get
+more messages until the message queue is empty. The information you receive
+there includes an easy handle pointer which you may use to identify which easy
+handle the information regards.
+
+When all transfers in the multi stack are done, cleanup the multi handle with
+\fIcurl_multi_cleanup\fP. Be careful and please note that you \fBMUST\fP
+invoke separate \fIcurl_easy_cleanup\fP calls on every single easy handle to
+clean them up properly.
+
+If you want to re-use an easy handle that was added to the multi handle for
+transfer, you must first remove it from the multi stack and then re-add it
+again (possbily after having altered some options at your own choice).

docs/libcurl/libcurl.3

@@ -2,24 +2,27 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH libcurl 5 "14 August 2001" "libcurl 7.8.1" "libcurl overview"
+.TH libcurl 3 "19 March 2002" "libcurl 7.9.6" "libcurl overview"
 .SH NAME
 libcurl \- client-side URL transfers
 .SH DESCRIPTION
-This is an overview on how to use libcurl in your c/c++ programs. There are
-specific man pages for each function mentioned in here.
+This is an overview on how to use libcurl in your C programs. There are
+specific man pages for each function mentioned in here. There's also the
+libcurl-the-guide document for a complete tutorial to programming with
+libcurl.
 
-libcurl can also be used directly from within your Java, PHP, Perl, Ruby or
-Tcl programs as well, look elsewhere for documentation on this!
+There are a dozen custom bindings that bring libcurl access to your favourite
+language. Look elsewhere for documentation on those.
 
 All applications that use libcurl should call \fIcurl_global_init()\fP exactly
 once before any libcurl function can be used. After all usage of libcurl is
 complete, it \fBmust\fP call \fIcurl_global_cleanup()\fP. In between those two
 calls, you can use libcurl as described below.
 
-When using libcurl you init your session and get a handle, which you use as
-input to the following interface functions you use. Use \fIcurl_easy_init()\fP
-to get the handle.
+When using libcurl's "easy" interface you init your session and get a handle,
+which you use as input to the easy interface functions you use. Use
+\fIcurl_easy_init()\fP to get the handle. There is also the so called "multi"
+interface, try the \fIlibcurl-multi(3)\fP man page for an overview of that.
 
 You continue by setting all the options you want in the upcoming transfer,
 most important among them is the URL itself (you can't transfer anything
@@ -56,9 +59,6 @@ get information about a performed transfer
 .B curl_formadd()
 helps building a HTTP form POST
 .TP
-.B curl_formparse()
-helps building a HTTP form POST (deprecated since 7.9 use curl_formadd()!)
-.TP
 .B curl_formfree()
 free a list built with curl_formparse()/curl_formadd()
 .TP
@@ -76,9 +76,8 @@ portable case insensitive string comparisons
 .RE
 
 .SH "LINKING WITH LIBCURL"
-Starting with 7.7.2 (on unix-like machines), there's a tool named curl-config
-that gets installed with the rest of the curl stuff when 'make install' is
-performed.
+On unix-like machines, there's a tool named curl-config that gets installed
+with the rest of the curl stuff when 'make install' is performed.
 
 curl-config is added to make it easier for applications to link with libcurl
 and developers to learn about libcurl and how to use it.
@@ -98,36 +97,24 @@ Only use documented functions and functionality!
 libcurl works
 .B exactly
 the same, on any of the platforms it compiles and builds on.
-
-There's only one caution, and that is the win32 platform that may(*) require
-you to init the winsock stuff before you use the libcurl functions. Details on
-this are noted on the curl_easy_init() man page.
-
-(*) = it appears as if users of the cygwin environment get this done
-automatically, also libcurl 7.8.1 and later can handle this for you.
 .SH "THREADS"
 Never ever call curl-functions simultaneously using the same handle from
 several threads. libcurl is thread-safe and can be used in any number of
 threads, but you must use separate curl handles if you want to use libcurl in
 more than one thread simultaneously.
 .SH "PERSISTANT CONNECTIONS"
-With libcurl 7.7, persistant connections were added. Persistant connections
-means that libcurl can re-use the same connection for several transfers, if
-the conditions are right.
+Persistent connections means that libcurl can re-use the same connection for
+several transfers, if the conditions are right.
 
-libcurl will *always* attempt to use persistant connections. Whenever you use
+libcurl will *always* attempt to use persistent connections. Whenever you use
 curl_easy_perform(), libcurl will attempt to use an existing connection to do
-the transfer, and if none exists it'll open a new one that will be subject
-for re-use on a possible following call to curl_easy_perform().
+the transfer, and if none exists it'll open a new one that will be subject for
+re-use on a possible following call to curl_easy_perform().
 
-To allow libcurl to take full advantage of persistant connections, you should
-do as many of your file transfers as possible using the same curl
-handle. When you call curl_easy_cleanup(), all the possibly open connections
-held by libcurl will be closed and forgotten.
+To allow libcurl to take full advantage of persistent connections, you should
+do as many of your file transfers as possible using the same curl handle. When
+you call curl_easy_cleanup(), all the possibly open connections held by
+libcurl will be closed and forgotten.
 
 Note that the options set with curl_easy_setopt() will be used in on every
 repeat curl_easy_perform() call
-.SH "COMPATIBILITY WITH OLDER LIBCURLS"
-Repeated curl_easy_perform() calls on the same handle were not supported in
-pre-7.7 versions, and caused confusion and undefined behaviour.
-

include/.cvsignore

@@ -0,0 +1,2 @@
+Makefile
+Makefile.in

include/curl/.cvsignore

@@ -0,0 +1,2 @@
+Makefile
+Makefile.in

include/curl/Makefile.am

@@ -3,5 +3,6 @@ pkginclude_HEADERS = \
 	easy.h \
 	mprintf.h \
 	stdcheaders.h \
-	types.h
+	types.h \
+	multi.h
 pkgincludedir= $(includedir)/curl

include/curl/curl.h

@@ -1,27 +1,27 @@
 #ifndef __CURL_CURL_H
 #define __CURL_CURL_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
  *                            | (__| |_| |  _ <| |___ 
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 2001, Daniel Stenberg, <daniel@haxx.se>, et al.
- *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
+ * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include <stdio.h>
 /* The include stuff here is mainly for time_t! */
@@ -30,11 +30,11 @@
 # include <time.h>
 #else
 # include <sys/types.h>
-# if TIME_WITH_SYS_TIME
+# ifdef TIME_WITH_SYS_TIME
 #  include <sys/time.h>
 #  include <time.h>
 # else
-#  if HAVE_SYS_TIME_H
+#  ifdef HAVE_SYS_TIME_H
 #   include <sys/time.h>
 #  else
 #   include <time.h>
@@ -49,22 +49,31 @@
 #define FALSE 0
 #endif
 
-#include <curl/types.h>
+#include "types.h"
 
 #ifdef  __cplusplus
 extern "C" {
 #endif
 
-struct HttpPost {
-  struct HttpPost *next; /* next entry in the list */
+/* stupid #define trick to preserve functionality with older code, but
+   making it use our name space for the future */
+#define HttpPost curl_httppost
+
+struct curl_httppost {
+  struct curl_httppost *next; /* next entry in the list */
   char *name;     /* pointer to allocated name */
   long namelength; /* length of name length */
   char *contents; /* pointer to allocated data contents */
   long contentslength; /* length of contents field */
+
+  /* CMC: Added support for buffer uploads */
+  char *buffer; /* pointer to allocated buffer contents */
+  long bufferlength; /* length of buffer field */
+
   char *contenttype; /* Content-Type */
   struct curl_slist* contentheader; /* list of extra headers for this form */
-  struct HttpPost *more; /* if one field name has more than one file, this
-			    link should link to following files */
+  struct curl_httppost *more; /* if one field name has more than one file, this
+                                 link should link to following files */
   long flags;     /* as defined below */
 #define HTTPPOST_FILENAME (1<<0) /* specified content is a file name */
 #define HTTPPOST_READFILE (1<<1) /* specified content is a file name */
@@ -72,13 +81,24 @@ struct HttpPost {
                                    do not free in formfree */
 #define HTTPPOST_PTRCONTENTS (1<<3) /* contents is only stored pointer
                                        do not free in formfree */
+
+/* CMC: Added support for buffer uploads */
+#define HTTPPOST_BUFFER (1<<4) /* upload file from buffer */
+#define HTTPPOST_PTRBUFFER (1<<5) /* upload file from pointer contents */
+
+  char *showfilename; /* The file name to show. If not set, the actual
+                         file name will be used (if this is a file part) */
 };
 
 typedef int (*curl_progress_callback)(void *clientp,
-                                      size_t dltotal,
-                                      size_t dlnow,
-                                      size_t ultotal,
-                                      size_t ulnow);
+                                      double dltotal,
+                                      double dlnow,
+                                      double ultotal,
+                                      double ulnow);
+
+  /* Tests have proven that 20K is a very bad buffer size for uploads on
+     Windows, while 16K for some odd reason performed a lot better. */
+#define CURL_MAX_WRITE_SIZE 16384
 
 typedef size_t (*curl_write_callback)(char *buffer,
                                       size_t size,
@@ -95,6 +115,23 @@ typedef int (*curl_passwd_callback)(void *clientp,
                                     char *buffer,
                                     int buflen);
 
+/* the kind of data that is passed to information_callback*/
+typedef enum {
+  CURLINFO_TEXT = 0,
+  CURLINFO_HEADER_IN,    /* 1 */
+  CURLINFO_HEADER_OUT,   /* 2 */
+  CURLINFO_DATA_IN,      /* 3 */
+  CURLINFO_DATA_OUT,     /* 4 */
+  CURLINFO_END
+} curl_infotype;
+
+typedef int (*curl_debug_callback)
+       (CURL *handle,      /* the handle/transfer this concerns */
+        curl_infotype type, /* what kind of data */
+        char *data,        /* points to the data */
+        size_t size,       /* size of the data pointed to */
+        void *userp);      /* whatever the user please */
+  
 /* All possible error codes from all sorts of curl functions. Future versions
    may return other values, stay prepared.
 
@@ -125,7 +162,7 @@ typedef enum {
   CURLE_FTP_COULDNT_RETR_FILE,   /* 19 */
   CURLE_FTP_WRITE_ERROR,         /* 20 */
   CURLE_FTP_QUOTE_ERROR,         /* 21 */
-  CURLE_HTTP_NOT_FOUND,          /* 22 */
+  CURLE_HTTP_RETURNED_ERROR,     /* 22 */
   CURLE_WRITE_ERROR,             /* 23 */
   CURLE_MALFORMAT_USER,          /* 24 - user name is illegally specified */
   CURLE_FTP_COULDNT_STOR_FILE,   /* 25 - failed FTP upload */
@@ -139,7 +176,7 @@ typedef enum {
   CURLE_HTTP_RANGE_ERROR,        /* 33 - RANGE "command" didn't work */
   CURLE_HTTP_POST_ERROR,         /* 34 */
   CURLE_SSL_CONNECT_ERROR,       /* 35 - wrong when connecting with SSL */
-  CURLE_FTP_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */
+  CURLE_BAD_DOWNLOAD_RESUME,     /* 36 - couldn't resume download */
   CURLE_FILE_COULDNT_READ_FILE,  /* 37 */
   CURLE_LDAP_CANNOT_BIND,        /* 38 */
   CURLE_LDAP_SEARCH_FAILED,      /* 39 */
@@ -157,11 +194,29 @@ typedef enum {
   CURLE_SSL_PEER_CERTIFICATE,    /* 51 - peer's certificate wasn't ok */
   CURLE_GOT_NOTHING,             /* 52 - when this is a specific error */
   CURLE_SSL_ENGINE_NOTFOUND,     /* 53 - SSL crypto engine not found */
-  CURLE_SSL_ENGINE_SETFAILED,    /* 54 - can not set SSL crypto engine as default */
+  CURLE_SSL_ENGINE_SETFAILED,    /* 54 - can not set SSL crypto engine as
+                                    default */
+  CURLE_SEND_ERROR,              /* 55 - failed sending network data */
+  CURLE_RECV_ERROR,              /* 56 - failure in receiving network data */
+  CURLE_SHARE_IN_USE,            /* 57 - share is in use */
+  CURLE_SSL_CERTPROBLEM,         /* 58 - problem with the local certificate */
+  CURLE_SSL_CIPHER,              /* 59 - couldn't use specified cipher */
+  CURLE_SSL_CACERT,              /* 60 - problem with the CA cert (path?) */
+  CURLE_BAD_CONTENT_ENCODING,    /* 61 - Unrecognized transfer encoding */
 
   CURL_LAST /* never use! */
 } CURLcode;
 
+/* Make a spelling correction for the operation timed-out define */
+#define CURLE_OPERATION_TIMEDOUT CURLE_OPERATION_TIMEOUTED
+#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR
+
+typedef enum {
+  CURLPROXY_HTTP = 0,
+  CURLPROXY_SOCKS4 = 4,
+  CURLPROXY_SOCKS5 = 5
+} curl_proxytype;
+
 /* this was the error code 50 in 7.7.3 and a few earlier versions, this
    is no longer used by libcurl but is instead #defined here only to not
    make programs break */
@@ -169,22 +224,47 @@ typedef enum {
 
 /* This is just to make older programs not break: */
 #define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE
+#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME
 
 #define CURL_ERROR_SIZE 256
 
+/* long may be 32 or 64 bits, but we should never depend on anything else
+   but 32 */
+#define CURLOPTTYPE_LONG          0
+#define CURLOPTTYPE_OBJECTPOINT   10000
+#define CURLOPTTYPE_FUNCTIONPOINT 20000
+
 /* name is uppercase CURLOPT_<name>,
    type is one of the defined CURLOPTTYPE_<type>
    number is unique identifier */
 #ifdef CINIT
 #undef CINIT
 #endif
-#define CINIT(name,type,number) CURLOPT_ ## name = CURLOPTTYPE_ ## type + number
+/*
+ * Figure out if we can use the ## operator, which is supported by ISO/ANSI C
+ * and C++. Some compilers support it without setting __STDC__ or __cplusplus
+ * so we need to carefully check for them too. We don't use configure-checks
+ * for these since we want these headers to remain generic and working for all
+ * platforms.
+ */
+#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) || \
+  defined(__HP_aCC) || defined(__BORLANDC__)
+  /* This compiler is believed to have an ISO compatible preprocessor */
+#define CURL_ISOCPP
+#else
+  /* This compiler is believed NOT to have an ISO compatible preprocessor */
+#undef CURL_ISOCPP
+#endif
 
-/* long may be 32 or 64 bits, but we should never depend on anything else
-   but 32 */
-#define CURLOPTTYPE_LONG          0
-#define CURLOPTTYPE_OBJECTPOINT   10000
-#define CURLOPTTYPE_FUNCTIONPOINT 20000
+#ifdef CURL_ISOCPP
+#define CINIT(name,type,number) CURLOPT_ ## name = CURLOPTTYPE_ ## type + number
+#else
+/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
+#define LONG          CURLOPTTYPE_LONG
+#define OBJECTPOINT   CURLOPTTYPE_OBJECTPOINT
+#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT
+#define CINIT(name,type,number) CURLOPT_/**/name = type + number
+#endif
 
 typedef enum {
   CINIT(NOTHING, LONG, 0), /********* the first one is unused ************/
@@ -272,7 +352,7 @@ typedef enum {
   /* Set cookie in request: */
   CINIT(COOKIE, OBJECTPOINT, 22),
 
-  /* This points to a linked list of headers, struct HttpHeader kind */
+  /* This points to a linked list of headers, struct curl_slist kind */
   CINIT(HTTPHEADER, OBJECTPOINT, 23),
 
   /* This points to a linked list of post entries, struct HttpPost */
@@ -344,7 +424,11 @@ typedef enum {
   CINIT(FTPLISTONLY, LONG, 48),  /* Use NLST when listing ftp dir */
 
   CINIT(FTPAPPEND, LONG, 50),    /* Append instead of overwrite on upload! */
-  CINIT(NETRC, LONG, 51),        /* read user+password from .netrc */
+
+  /* Specify whether to read the user+password from the .netrc or the URL.
+   * This must be one of the CURL_NETRC_* enums below. */
+  CINIT(NETRC, LONG, 51),
+
   CINIT(FOLLOWLOCATION, LONG, 52),  /* use Location: Luke! */
 
   /* This FTPASCII name is now obsolete, to be removed, use the TRANSFERTEXT
@@ -488,9 +572,62 @@ typedef enum {
    */
   CINIT(SSLENGINE_DEFAULT, LONG, 90),
 
-  CURLOPT_LASTENTRY /* the last unusued */
+  /* Non-zero value means to use the global dns cache */
+  CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91),
+
+  /* DNS cache timeout */
+  CINIT(DNS_CACHE_TIMEOUT, LONG, 92),
+
+  /* send linked-list of pre-transfer QUOTE commands (Wesley Laxton)*/
+  CINIT(PREQUOTE, OBJECTPOINT, 93),
+
+  /* set the debug function */
+  CINIT(DEBUGFUNCTION, FUNCTIONPOINT, 94),
+
+  /* set the data for the debug function */
+  CINIT(DEBUGDATA, OBJECTPOINT, 95),
+
+  /* mark this as start of a cookie session */
+  CINIT(COOKIESESSION, LONG, 96),
+
+  /* The CApath directory used to validate the peer certificate
+     this option is used only if SSL_VERIFYPEER is true */
+  CINIT(CAPATH, OBJECTPOINT, 97),
+
+  /* Instruct libcurl to use a smaller receive buffer */
+  CINIT(BUFFERSIZE, LONG, 98),
+
+  /* Instruct libcurl to not use any signal/alarm handlers, even when using
+     timeouts. This option is useful for multi-threaded applications.
+     See libcurl-the-guide for more background information. */
+  CINIT(NOSIGNAL, LONG, 99),
+  
+  /* Provide a CURLShare for mutexing non-ts data */
+  CINIT(SHARE, OBJECTPOINT, 100),
+
+  /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default),
+     CURLPROXY_SOCKS4 and CURLPROXY_SOCKS5. */
+  CINIT(PROXYTYPE, LONG, 101),
+
+  /* Set the Accept-Encoding string. Use this to tell a server you would like
+     the response to be compressed. */
+  CINIT(ENCODING, OBJECTPOINT, 102),
+ 
+  /* Set pointer to private data */
+  CINIT(PRIVATE, OBJECTPOINT, 103),
+
+  /* Set aliases for HTTP 200 in the HTTP Response header */
+  CINIT(HTTP200ALIASES, OBJECTPOINT, 104),
+
+  CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
+  /* two convenient "aliases" that follow the name scheme better */
+#define CURLOPT_WRITEDATA CURLOPT_FILE
+#define CURLOPT_READDATA  CURLOPT_INFILE 
+#define CURLOPT_HEADERDATA CURLOPT_WRITEHEADER
+
+
   /* These enums are for use with the CURLOPT_HTTP_VERSION option. */
 enum {
   CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd
@@ -502,6 +639,18 @@ enum {
   CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */
 };
 
+  /* These enums are for use with the CURLOPT_NETRC option. */
+enum CURL_NETRC_OPTION {
+  CURL_NETRC_IGNORED,     /* The .netrc will never be read.
+                           * This is the default. */
+  CURL_NETRC_OPTIONAL,    /* A user:password in the URL will be preferred
+                           * to one in the .netrc. */
+  CURL_NETRC_REQUIRED,    /* A user:password in the URL will be ignored.
+                           * Unless one is set programmatically, the .netrc
+                           * will be queried. */
+  CURL_NETRC_LAST
+};
+
 enum {
   CURL_SSLVERSION_DEFAULT,
   CURL_SSLVERSION_TLSv1,
@@ -513,15 +662,26 @@ enum {
 
 
 typedef enum {
-  TIMECOND_NONE,
+  CURL_TIMECOND_NONE,
 
-  TIMECOND_IFMODSINCE,
-  TIMECOND_IFUNMODSINCE,
-  TIMECOND_LASTMOD,
+  CURL_TIMECOND_IFMODSINCE,
+  CURL_TIMECOND_IFUNMODSINCE,
+  CURL_TIMECOND_LASTMOD,
 
-  TIMECOND_LAST
+  CURL_TIMECOND_LAST
 } curl_TimeCond;
 
+/* for backwards compatibility */
+#ifndef TIMECOND_IFMODSINCE
+#define TIMECOND_IFMODSINCE CURL_TIMECOND_IFMODSINCE
+#endif
+#ifndef TIMECOND_IFUNMODSINCE
+#define TIMECOND_IFUNMODSINCE CURL_TIMECOND_IFUNMODSINCE
+#endif
+#ifndef TIMECOND_LASTMOD
+#define TIMECOND_LASTMOD CURL_TIMECOND_LASTMOD
+#endif
+
 #ifdef __BEOS__
 #include <support/SupportDefs.h>
 #endif
@@ -539,16 +699,21 @@ extern int (curl_strnequal)(const char *s1, const char *s2, size_t n);
 #define strequal(a,b) curl_strequal(a,b)
 #define strnequal(a,b,c) curl_strnequal(a,b,c)
 
-/* external form function */
-int curl_formparse(char *string,
-                   struct HttpPost **httppost,
-                   struct HttpPost **last_post);
+/* DEPRECATED function to build formdata */
+int curl_formparse(char *, struct curl_httppost **,
+                   struct curl_httppost **_post);
 
 /* name is uppercase CURLFORM_<name> */
 #ifdef CFINIT
 #undef CFINIT
 #endif
+
+#ifdef CURL_ISOCPP
 #define CFINIT(name) CURLFORM_ ## name
+#else
+/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
+#define CFINIT(name) CURLFORM_/**/name
+#endif
 
 typedef enum {
   CFINIT(NOTHING),        /********* the first one is unused ************/
@@ -562,29 +727,65 @@ typedef enum {
   CFINIT(CONTENTSLENGTH),
   CFINIT(FILECONTENT),
   CFINIT(ARRAY),
-  CFINIT(ARRAY_START), /* below are the options allowed within a array */
+  CFINIT(OBSOLETE),
   CFINIT(FILE),
+
+  CFINIT(BUFFER),
+  CFINIT(BUFFERPTR),
+  CFINIT(BUFFERLENGTH),
+
   CFINIT(CONTENTTYPE),
   CFINIT(CONTENTHEADER),
+  CFINIT(FILENAME),
   CFINIT(END),
-  CFINIT(ARRAY_END),   /* up are the options allowed within a array */
+  CFINIT(OBSOLETE2),
 
   CURLFORM_LASTENTRY /* the last unusued */
 } CURLformoption;
 
+#undef CFINIT /* done */
+
 /* structure to be used as parameter for CURLFORM_ARRAY */
 struct curl_forms {
 	CURLformoption		option;
 	const char		*value;
 };
 
-/* new external form function */
-int curl_formadd(struct HttpPost **httppost,
-                 struct HttpPost **last_post,
+/* use this for multipart formpost building */
+/* Returns code for curl_formadd()
+ * 
+ * Returns:
+ * CURL_FORMADD_OK             on success
+ * CURL_FORMADD_MEMORY         if the FormInfo allocation fails
+ * CURL_FORMADD_OPTION_TWICE   if one option is given twice for one Form
+ * CURL_FORMADD_NULL           if a null pointer was given for a char
+ * CURL_FORMADD_MEMORY         if the allocation of a FormInfo struct failed
+ * CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used
+ * CURL_FORMADD_INCOMPLETE     if the some FormInfo is not complete (or error)
+ * CURL_FORMADD_MEMORY         if a HttpPost struct cannot be allocated
+ * CURL_FORMADD_MEMORY         if some allocation for string copying failed.
+ * CURL_FORMADD_ILLEGAL_ARRAY  if an illegal option is used in an array
+ *
+ ***************************************************************************/
+typedef enum {
+  CURL_FORMADD_OK, /* first, no error */
+
+  CURL_FORMADD_MEMORY,
+  CURL_FORMADD_OPTION_TWICE,
+  CURL_FORMADD_NULL,
+  CURL_FORMADD_UNKNOWN_OPTION,
+  CURL_FORMADD_INCOMPLETE,
+  CURL_FORMADD_ILLEGAL_ARRAY,
+
+  CURL_FORMADD_LAST /* last */
+} CURLFORMcode;
+
+CURLFORMcode curl_formadd(struct curl_httppost **httppost,
+                 struct curl_httppost **last_post,
                  ...);
 
 /* cleanup a form: */
-void curl_formfree(struct HttpPost *form);
+void curl_formfree(struct curl_httppost *form);
 
 /* Unix and Win32 getenv function call, this returns a malloc()'ed string that
    MUST be free()ed after usage is complete. */
@@ -597,6 +798,9 @@ char *curl_version(void);
  * allocated string or NULL if an error occurred.  */
 char *curl_escape(const char *string, int length);
 char *curl_unescape(const char *string, int length);
+/* 20020912 WJM. Provide for a de-allocation in the same translation unit
+   that did the allocation. Added in libcurl 7.10 */
+void curl_free(void *p);
 
 /* curl_global_init() should be invoked exactly once for each application that
    uses libcurl */
@@ -607,8 +811,8 @@ CURLcode curl_global_init(long flags);
 void curl_global_cleanup(void);
 
 /* This is the version number */
-#define LIBCURL_VERSION "7.9.2"
-#define LIBCURL_VERSION_NUM 0x070902
+#define LIBCURL_VERSION "7.10.3"
+#define LIBCURL_VERSION_NUM 0x070a03
 
 /* linked-list structure for the CURLOPT_QUOTE option (and other) */
 struct curl_slist {
@@ -660,12 +864,17 @@ typedef enum {
 
   CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17,
 
-  CURLINFO_LASTONE          = 18
-} CURLINFO;
+  CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18,
 
-/* unfortunately, the easy.h include file needs the options and info stuff
-   before it can be included! */
-#include <curl/easy.h> /* nothing in curl is fun without the easy stuff */
+  CURLINFO_REDIRECT_TIME   = CURLINFO_DOUBLE + 19,
+  CURLINFO_REDIRECT_COUNT  = CURLINFO_LONG + 20,
+
+  CURLINFO_PRIVATE = CURLINFO_STRING + 21,
+
+  /* Fill in new entries here! */
+
+  CURLINFO_LASTONE          = 22
+} CURLINFO;
 
 typedef enum {
   CURLCLOSEPOLICY_NONE, /* first, never use this */
@@ -685,8 +894,106 @@ typedef enum {
 #define CURL_GLOBAL_NOTHING 0
 #define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL
 
+
+/*****************************************************************************
+ * Setup defines, protos etc for the sharing stuff.
+ */
+
+/* Different data locks for a single share */
+typedef enum {
+  CURL_LOCK_DATA_NONE = 0,
+  CURL_LOCK_DATA_COOKIE = 1,
+  CURL_LOCK_DATA_DNS = 2,
+  CURL_LOCK_DATA_SSL_SESSION = 3,
+  CURL_LOCK_DATA_CONNECT = 4,
+  CURL_LOCK_DATA_LAST
+} curl_lock_data;
+
+/* Different lock access types */
+typedef enum {
+  CURL_LOCK_ACCESS_NONE = 0,   /* unspecified action */
+  CURL_LOCK_ACCESS_SHARED = 1, /* for read perhaps */
+  CURL_LOCK_ACCESS_SINGLE = 2, /* for write perhaps */
+  CURL_LOCK_ACCESS_LAST        /* never use */
+} curl_lock_access;
+
+typedef void (*curl_lock_function)(CURL *handle,
+                                   curl_lock_data data,
+                                   curl_lock_access access,
+                                   void *userptr);
+typedef void (*curl_unlock_function)(CURL *handle,
+                                     curl_lock_data data,
+                                     void *userptr);
+
+typedef void CURLSH;
+
+typedef enum {
+  CURLSHE_OK,  /* all is fine */
+  CURLSHE_BAD_OPTION, /* 1 */
+  CURLSHE_IN_USE,     /* 2 */
+  CURLSHE_INVALID,    /* 3 */
+  CURLSHE_LAST /* never use */
+} CURLSHcode;
+
+typedef enum {
+  CURLSHOPT_NONE,  /* don't use */
+  CURLSHOPT_SHARE,   /* specify a data type to share */
+  CURLSHOPT_UNSHARE, /* specify shich data type to stop sharing */
+  CURLSHOPT_LOCKFUNC,   /* pass in a 'curl_lock_function' pointer */
+  CURLSHOPT_UNLOCKFUNC, /* pass in a 'curl_unlock_function' pointer */
+  CURLSHOPT_USERDATA,   /* pass in a user data pointer used in the lock/unlock
+                           callback functions */
+  CURLSHOPT_LAST  /* never use */
+} CURLSHoption;
+
+CURLSH *curl_share_init(void);
+CURLSHcode curl_share_setopt(CURLSH *, CURLSHoption option, ...);
+CURLSHcode curl_share_cleanup(CURLSH *);
+
+/****************************************************************************
+ * Structures for querying information about the curl library at runtime.
+ */
+
+typedef enum {
+  CURLVERSION_FIRST,
+  CURLVERSION_LAST /* never actually use this */
+} CURLversion;
+
+/* The 'CURLVERSION_NOW' is the symbolic name meant to be used by
+   basicly all programs ever, that want to get version information. It is
+   meant to be a built-in version number for what kind of struct the caller
+   expects. If the struct ever changes, we redfine the NOW to another enum
+   from above. */
+#define CURLVERSION_NOW CURLVERSION_FIRST
+
+typedef struct {
+  CURLversion age;          /* age of the returned struct */
+  const char *version;      /* LIBCURL_VERSION */
+  unsigned int version_num; /* LIBCURL_VERSION_NUM */
+  const char *host;         /* OS/host/cpu/machine when configured */
+  int features;             /* bitmask, see defines below */
+  char *ssl_version;        /* human readable string */
+  long ssl_version_num;     /* number */
+  const char *libz_version;       /* human readable string */
+  /* protocols is terminated by an entry with a NULL protoname */
+  const char **protocols;
+} curl_version_info_data;
+
+#define CURL_VERSION_IPV6      (1<<0)
+#define CURL_VERSION_KERBEROS4 (1<<1)
+#define CURL_VERSION_SSL       (1<<2)
+#define CURL_VERSION_LIBZ      (1<<3)
+
+/* returns a pointer to a static copy of the version info struct */
+curl_version_info_data *curl_version_info(CURLversion);
+
 #ifdef  __cplusplus
 }
 #endif
 
+/* unfortunately, the easy.h and multi.h include files need options and info
+  stuff before they can be included! */
+#include "easy.h" /* nothing in curl is fun without the easy stuff */
+#include "multi.h"
+
 #endif /* __CURL_CURL_H */