THANKS: added contributors from the 7.32.0 release notes

It shows intermittent failures and I haven't been able to track them
down yet. Disable this test for now.

.gitignore

@@ -45,3 +45,4 @@ CHANGES.dist
 .project
 .cproject
 .settings
+/[0-9]*.patch

MacOSX-Framework

@@ -10,6 +10,10 @@
 # 10.5 is the *ONLY* SDK that support PPC64 :( -- 10.6 do not have ppc64 support
 #If you need to have PPC64 support then change below to 1
 PPC64_NEEDED=0
+# Apple does not support building for PPC anymore in Xcode 4 and later.
+# If you're using Xcode 3 or earlier and need PPC support, then change
+# the setting below to 1
+PPC_NEEDED=0
 
 # For me the default is to develop for the platform I am on, and if you
 #desire compatibility with older versions then change USE_OLD to 1 :)
@@ -24,9 +28,16 @@ FRAMEWORK_VERSION=Versions/Release-$VERSION
 # and setup the right paths to this version, leaving the system version
 # "intact", so you can "fix" it later with the links to Versions/A/...
 
-
-OLD_SDK=`ls  /Developer/SDKs|head -1`
-NEW_SDK=`ls -r /Developer/SDKs|head -1`
+DEVELOPER_PATH=`xcode-select --print-path`
+# Around Xcode 4.3, SDKs were moved from the Developer folder into the
+# MacOSX.platform folder
+if test -d "$DEVELOPER_PATH/Platforms/MacOSX.platform/Developer/SDKs"; then
+ SDK_PATH="$DEVELOPER_PATH/Platforms/MacOSX.platform/Developer/SDKs"
+else
+ SDK_PATH="$DEVELOPER_PATH/SDKs";
+fi
+OLD_SDK=`ls  $SDK_PATH|head -1`
+NEW_SDK=`ls -r $SDK_PATH|head -1`
 
 if test "0"$USE_OLD -gt 0
 then
@@ -37,21 +48,24 @@ fi
 
 MACVER=`echo $SDK32|sed -e s/[a-zA-Z]//g -e s/.\$//`
 
-SDK32_DIR='/Developer/SDKs/'$SDK32
+SDK32_DIR=$SDK_PATH/$SDK32
 MINVER32='-mmacosx-version-min='$MACVER
-ARCHES32='-arch i386 -arch ppc'
-
+if test $PPC_NEEDED -gt 0; then
+ ARCHES32='-arch i386 -arch ppc'
+else
+ ARCHES32='-arch i386'
+fi
 
 if test $PPC64_NEEDED -gt 0
 then
   SDK64=10.5
   ARCHES64='-arch x86_64 -arch ppc64'
-  SDK64=`ls  /Developer/SDKs|grep 10.5|head -1`
+  SDK64=`ls  $SDK_PATH|grep 10.5|head -1`
 else
  ARCHES64='-arch x86_64'
  #We "know" that 10.4 and earlier do not support 64bit
- OLD_SDK64=`ls  /Developer/SDKs|egrep -v "10.[0-4]"|head -1`
- NEW_SDK64=`ls -r /Developer/SDKs|egrep -v "10.[0-4]"|head -1`
+ OLD_SDK64=`ls  $SDK_PATH|egrep -v "10.[0-4]"|head -1`
+ NEW_SDK64=`ls -r $SDK_PATH|egrep -v "10.[0-4]"|head -1`
  if test $USE_OLD -gt 0
   then
    SDK64=$OLD_SDK64
@@ -60,7 +74,7 @@ else
   fi
 fi
 
-SDK64_DIR='/Developer/SDKs/'$SDK64
+SDK64_DIR=$SDK_PATH/$SDK64
 MACVER64=`echo $SDK64|sed -e s/[a-zA-Z]//g -e s/.\$//`
 
 MINVER64='-mmacosx-version-min='$MACVER64
@@ -68,13 +82,13 @@ MINVER64='-mmacosx-version-min='$MACVER64
 if test ! -z $SDK32; then
   echo "----Configuring libcurl for 32 bit universal framework..."
   make clean
-  ./configure --disable-dependency-tracking --disable-static --with-gssapi \
-    CFLAGS="-Os -isysroot $SDK32_DIR $ARCHES32 $MINVER32" \
-    LDFLAGS="-Wl,-syslibroot,$SDK32_DIR $ARCHES32 $MINVER32 -Wl,-headerpad_max_install_names" \
+  ./configure --disable-dependency-tracking --disable-static --with-gssapi --with-darwinssl \
+    CFLAGS="-Os -isysroot $SDK32_DIR $ARCHES32" \
+    LDFLAGS="-Wl,-syslibroot,$SDK32_DIR $ARCHES32 -Wl,-headerpad_max_install_names" \
     CC=$CC
 
   echo "----Building 32 bit libcurl..."
-  make
+  make -j `sysctl -n hw.logicalcpu_max`
 
   echo "----Creating 32 bit framework..."
   rm -r libcurl.framework
@@ -89,21 +103,21 @@ if test ! -z $SDK32; then
   ln -fs ${FRAMEWORK_VERSION}/Resources Resources
   ln -fs ${FRAMEWORK_VERSION}/Headers Headers
   cd Versions
-  ln -fs ${FRAMEWORK_VERSION} Current
+  ln -fs $(basename "${FRAMEWORK_VERSION}") Current
 
-  echo TEsting for SDK64
+  echo Testing for SDK64
   if test -d $SDK64_DIR; then
   echo entering...
     popd
     make clean
     echo "----Configuring libcurl for 64 bit universal framework..."
-    ./configure --disable-dependency-tracking --disable-static --with-gssapi \
-      CFLAGS="-Os -isysroot $SDK64_DIR $ARCHES64 $MINVER64" \
-      LDFLAGS="-Wl,-syslibroot,$SDK64_DIR $ARCHES64 $MINVER64 -Wl,-headerpad_max_install_names" \
+    ./configure --disable-dependency-tracking --disable-static --with-gssapi --with-darwinssl \
+      CFLAGS="-Os -isysroot $SDK64_DIR $ARCHES64" \
+      LDFLAGS="-Wl,-syslibroot,$SDK64_DIR $ARCHES64 -Wl,-headerpad_max_install_names" \
       CC=$CC
 
     echo "----Building 64 bit libcurl..."
-    make
+    make -j `sysctl -n hw.logicalcpu_max`
 
     echo "----Appending 64 bit framework to 32 bit framework..."
     cp lib/.libs/libcurl.dylib libcurl.framework/${FRAMEWORK_VERSION}/libcurl64

Makefile.am

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -30,13 +30,38 @@ CMake/CurlTests.c CMake/FindOpenSSL.cmake CMake/FindZLIB.cmake		\
 CMake/OtherTests.cmake CMake/Platforms/WindowsCache.cmake		\
 CMake/Utilities.cmake include/curl/curlbuild.h.cmake
 
+VC6LIBDSP = vs/vc6/lib/vc6libcurl.dsp
+VC6LIBDSPHEAD = vs/t/lib/vc6_libcurl_dsp.head
+VC6LIBDSPFOOT = vs/t/lib/vc6_libcurl_dsp.foot
+
+VC8LIBPRJ = vs/vc8/lib/vc8libcurl.vcproj
+VC8LIBPRJHEAD = vs/t/lib/vc8_libcurl_prj.head
+VC8LIBPRJFOOT = vs/t/lib/vc8_libcurl_prj.foot
+
+VC_DIST = \
+ vs/t/README \
+ $(VC6LIBDSP) $(VC6LIBDSPHEAD) $(VC6LIBDSPFOOT) \
+ $(VC8LIBPRJ) $(VC8LIBPRJHEAD) $(VC8LIBPRJFOOT) \
+ vs/vc6/vc6curl.dsw \
+ vs/vc6/lib/vc6libcurl.dsw \
+ vs/vc6/src/vc6curltool.dsw \
+ vs/vc6/src/vc6curltool.dsp
+
+VC6LIBDSP_DEPS = $(VC6LIBDSPHEAD) $(VC6LIBDSPFOOT) \
+ Makefile.am lib/Makefile.inc
+
+VC8LIBPRJ_DEPS = $(VC8LIBPRJHEAD) $(VC8LIBPRJFOOT) \
+ Makefile.am lib/Makefile.inc
+
 WINBUILD_DIST = winbuild/BUILD.WINDOWS.txt winbuild/gen_resp_file.bat	\
-winbuild/MakefileBuild.vc winbuild/Makefile.vc
+ winbuild/MakefileBuild.vc winbuild/Makefile.vc				\
+ winbuild/Makefile.msvc.names
 
 EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in	\
- curl-style.el sample.emacs RELEASE-NOTES buildconf 	\
- libcurl.pc.in vc6curl.dsw MacOSX-Framework Android.mk $(CMAKE_DIST)	\
- Makefile.msvc.names $(WINBUILD_DIST) lib/libcurl.vers.in
+ RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework	\
+ $(CMAKE_DIST) $(VC_DIST) $(WINBUILD_DIST) lib/libcurl.vers.in
+
+CLEANFILES = $(VC6LIBDSP) $(VC8LIBPRJ)
 
 bin_SCRIPTS = curl-config
 
@@ -46,6 +71,12 @@ DIST_SUBDIRS = $(SUBDIRS) tests packages docs
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = libcurl.pc
 
+# List of libcurl source files required to generate VC IDE dsp and prj files
+include lib/Makefile.inc
+
+WIN32SOURCES = $(CSOURCES)
+WIN32HEADERS = $(HHEADERS) config-win32.h
+
 dist-hook:
 	rm -rf $(top_builddir)/tests/log
 	find $(distdir) -name "*.dist" -exec rm {} \;
@@ -89,7 +120,7 @@ endif
 examples:
 	@(cd docs/examples; $(MAKE) check)
 
-# This is a hook to have 'make clean' also clean up the dosc and the tests
+# This is a hook to have 'make clean' also clean up the docs and the tests
 # dir. The extra check for the Makefiles being present is necessary because
 # 'make distcheck' will make clean first in these directories _before_ it runs
 # this hook.
@@ -166,3 +197,86 @@ ca-firefox: lib/firefox-db2pem.sh
 checksrc:
 	cd lib && $(MAKE) checksrc
 	cd src && $(MAKE) checksrc
+
+.PHONY: vc6-ide
+
+vc6-ide:
+	$(MAKE) $(VC6LIBDSP)
+
+$(VC6LIBDSP): $(VC6LIBDSP_DEPS)
+	@(echo "generating '$(VC6LIBDSP)'"; \
+	\
+	for dir in 'vs' 'vs/vc6' 'vs/vc6/lib'; do \
+	  test -d "$$dir" || mkdir "$$dir" || exit 1; \
+	done; \
+	\
+	dir='..\..\..\lib\'; \
+	body='$(VC6LIBDSP)'.body; \
+	win32_srcs='$(WIN32SOURCES)'; \
+	win32_hdrs='$(WIN32HEADERS)'; \
+	sorted_srcs=`for file in $$win32_srcs; do echo $$file; done | sort`; \
+	sorted_hdrs=`for file in $$win32_hdrs; do echo $$file; done | sort`; \
+	\
+	echo "# Begin Group \"Source Files\""  > $$body; \
+	echo ""                               >> $$body; \
+	echo "# PROP Default_Filter \"\""     >> $$body; \
+	for file in $$sorted_srcs; do \
+	  echo "# Begin Source File"          >> $$body; \
+	  echo ""                             >> $$body; \
+	  echo "SOURCE="$$dir$$file           >> $$body; \
+	  echo "# End Source File"            >> $$body; \
+	done; \
+	echo "# End Group"                    >> $$body; \
+	echo "# Begin Group \"Header Files\"" >> $$body; \
+	echo ""                               >> $$body; \
+	echo "# PROP Default_Filter \"\""     >> $$body; \
+	for file in $$sorted_hdrs; do \
+	  echo "# Begin Source File"          >> $$body; \
+	  echo ""                             >> $$body; \
+	  echo "SOURCE="$$dir$$file           >> $$body; \
+	  echo "# End Source File"            >> $$body; \
+	done; \
+	echo "# End Group"                    >> $$body; \
+	\
+	awk '{ printf("%s\r\n", $$0); }' \
+	  $(srcdir)/$(VC6LIBDSPHEAD) $$body $(srcdir)/$(VC6LIBDSPFOOT) \
+	  > $(VC6LIBDSP) || { rm -f $$body; exit 1; }; \
+	\
+	rm -f $$body)
+
+.PHONY: vc8-ide
+
+vc8-ide:
+	$(MAKE) $(VC8LIBPRJ)
+
+$(VC8LIBPRJ): $(VC8LIBPRJ_DEPS)
+	@(echo "generating '$(VC8LIBPRJ)'"; \
+	\
+	for dir in 'vs' 'vs/vc8' 'vs/vc8/lib'; do \
+	  test -d "$$dir" || mkdir "$$dir" || exit 1; \
+	done; \
+	\
+	dir='..\..\..\lib\'; \
+	body='$(VC8LIBPRJ)'.body; \
+	win32_srcs='$(WIN32SOURCES)'; \
+	win32_hdrs='$(WIN32HEADERS)'; \
+	sorted_srcs=`for file in $$win32_srcs; do echo $$file; done | sort`; \
+	sorted_hdrs=`for file in $$win32_hdrs; do echo $$file; done | sort`; \
+	\
+	echo "%tab%%tab%<Filter Name=\"Source Files\">"  > $$body; \
+	for file in $$sorted_srcs; do \
+	  echo "%tab%%tab%%tab%<File RelativePath=\""$$dir$$file"\"></File>" >> $$body; \
+	done; \
+	echo "%tab%%tab%</Filter>"                      >> $$body; \
+	echo "%tab%%tab%<Filter Name=\"Header Files\">" >> $$body; \
+	for file in $$sorted_hdrs; do \
+	  echo "%tab%%tab%%tab%<File RelativePath=\""$$dir$$file"\"></File>" >> $$body; \
+	done; \
+	echo "%tab%%tab%</Filter>"                      >> $$body; \
+	\
+	awk '{ gsub(/%tab%/, "\t"); printf("%s\r\n", $$0); }' \
+	  $(srcdir)/$(VC8LIBPRJHEAD) $$body $(srcdir)/$(VC8LIBPRJFOOT) \
+	  > $(VC8LIBPRJ) || { rm -f $$body; exit 1; }; \
+	\
+	rm -f $$body)
+

Makefile.dist

@@ -148,12 +148,24 @@ vc-ssl-zlib: $(VC)
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-ssl-zlib
 
+vc-winssl-zlib: $(VC)
+	cd lib
+	nmake /f Makefile.$(VC) cfg=release-winssl-zlib
+	cd ..\src
+	nmake /f Makefile.$(VC) cfg=release-winssl-zlib
+
 vc-x64-ssl-zlib: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib
 	cd ..\src
 	nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib
 
+vc-x64-winssl-zlib: $(VC)
+	cd lib
+	nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-winssl-zlib
+	cd ..\src
+	nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-winssl-zlib
+
 vc-ssl-dll: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-ssl-dll

RELEASE-NOTES

@@ -1,66 +1,69 @@
-Curl and libcurl 7.29.0
+Curl and libcurl 7.32.0
 
- Public curl releases:         131
+ Public curl releases:         134
  Command line options:         152
  curl_easy_setopt() options:   199
  Public functions in libcurl:  58
- Known libcurl bindings:       39
- Contributors:                 993
+ Known libcurl bindings:       42
+ Contributors:                 1049
 
-This release includes the following securify fix:
-
- o POP3/IMAP/SMTP SASL buffer overflow vulnerability [17]
+***
+  krb4 support is up for removal. If you care about it at all, speak up
+  on the curl-library list asap!
+***
 
 This release includes the following changes:
 
- o test: offer "automake" output and check for perl better
- o always-multi: always use non-blocking internals [1]
- o imap: Added support for sasl digest-md5 authentication
- o imap: Added support for sasl cram-md5 authentication
- o imap: Added support for sasl ntlm authentication
- o imap: Added support for sasl login authentication
- o imap: Added support for sasl plain text authentication
- o imap: Added support for login disabled server capability
- o mk-ca-bundle: add -f, support passing to stdout and more [5]
- o writeout: -w now supports remote_ip/port and local_ip/port
+ o curl: allow timeouts to accept decimal values
+ o OS400: add slist and certinfo EBCDIC support
+ o OS400: new SSL backend GSKit
+ o CURLOPT_XFERINFOFUNCTION: introducing a new progress callback
+ o LIBCURL-STRUCTS: new document
 
 This release includes the following bugfixes:
 
- o nss: prevent NSS from crashing on client auth hook failure
- o darwinssl: Fixed inability to disable peer verification on Snow Leopard
-   and Lion
- o curl_multi_remove_handle: fix memory leak triggered with CURLOPT_RESOLVE
- o SCP: relative path didn't work as documented [7]
- o setup_once.h: HP-UX <sys/socket.h> issue workaround
- o configure: fix cross pkg-config detection
- o runtests: Do not add undefined values to @INC
- o build: fix compilation with CURL_DISABLE_CRYPTO_AUTH flag
- o multi: fix re-sending request on early connection close
- o HTTP: remove stray CRLF in chunk-encoded content-free request bodies
- o build: fix AIX compilation and usage of events/revents
- o VC Makefiles: add missing hostcheck
- o nss: clear session cache if a client certificate from file is used
- o nss: fix error messages for CURLE_SSL_{CACERT,CRL}_BADFILE
- o fix HTTP CONNECT tunnel establishment upon delayed response [2]
- o --libcurl: fix for non-zero default options
- o FTP: reject illegal port numbers in EPSV 229 responses
- o build: use per-target '_CPPFLAGS' for those currently using default
- o configure: fix automake 1.13 compatibility [6]
- o curl: ignore SIGPIPE [4]
- o pop3: Added support for non-blocking SSL upgrade
- o pop3: Fixed default authentication detection
- o imap: Fixed usernames and passwords that contain escape characters
- o packages/DOS/common.dj: remove COFF debug info generation [3]
- o imap/pop3/smtp: Fixed failure detection during TLS upgrade [8]
- o pop3: Fixed no known authentication mechanism when fallback is required [9]
- o formadd: reject trying to read a directory where a file is expected [10]
- o formpost: support quotes, commas and semicolon in file names [11]
- o docs: update the comments about loading CA certs with NSS [12]
- o docs: fix typos in man pages [13]
- o darwinssl: Fix bug where packets were sometimes transmitted twice [14]
- o winbuild: include version info for .dll .exe [15]
- o schannel: Removed extended error connection setup flag [16]
- o VMS: fix and generate the VMS build config
+ o dotdot: introducing dot file path cleanup [1]
+ o docs: fix typo in curl_easy_getinfo manpage
+ o test1230: avoid using hard-wired port number
+ o test1396: invoke the correct test tool
+ o SIGPIPE: ignored while inside the library [2]
+ o darwinssl: fix crash that started happening in Lion
+ o OpenSSL: check for read errors, don't assume [3]
+ o c-ares: improve error message on failed resolve [4]
+ o printf: make sure %x are treated unsigned
+ o formpost: better random boundaries [5]
+ o url: restore the functionality of 'curl -u :' [6]
+ o curl.1: fix typo in --xattr description [7]
+ o digest: improve nonce generation
+ o configure: automake 1.14 compatibility tweak
+ o curl.1: document the --post303 option in the man page
+ o curl.1: document the --sasl-ir option in the man page
+ o setup-vms.h: sk_pop symbol tweak
+ o tool_paramhlp: try harder to catch negatives
+ o cmake: Fix for MSVC2010 project generation [8]
+ o asyn-ares: Don't blank ares servers if none configured
+ o curl_multi_wait: set revents for extra fds
+ o Reinstate "WIN32 MemoryTracking: track wcsdup() _wcsdup() and _tcsdup()
+ o ftp_do_more: consider DO_MORE complete when server connects back [9]
+ o curl_easy_perform: gradually increase the delay time [10]
+ o curl: fix symbolic names for CURLUSESSL_* enum in --libcurl output
+ o curl: fix upload of a zip file in OpenVMS [11]
+ o build: fix linking on Solaris 10 [12]
+ o curl_formadd: CURLFORM_FILECONTENT wrongly rejected some option combos [13]
+ o curl_formadd: fix file upload on VMS [14]
+ o curl_easy_pause: on unpause, trigger mulit-socket handling [15]
+ o md5 & metalink: use better build macros on Apple operating systems [16]
+ o darwinssl: fix build error in crypto authentication under Snow Leopard [16]
+ o curl: make --progress-bar update the line less frequently [17]
+ o configure: don't error out on variable confusions (CFLAGS, LDFLAGS etc)
+ o mk-ca-bundle: skip more untrusted certificates
+ o formadd: wrong pointer for file name when CURLFORM_BUFFERPTR used [18]
+ o FTP: when EPSV gets a 229 but fails to connect, retry with PASV
+ o mk-ca-bundle.1: don't install on make install [19]
+ o VMS: lots of updates and fixes of the build procedure
+ o global dns cache: didn't work (regression)
+ o global dns cache: fix memory leak
+ o 
 
 This release includes the following known bugs:
 
@@ -69,32 +72,34 @@ This release includes the following known bugs:
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Nick Zitzmann, Colin Watson, Fabian Keil, Kamil Dudka, Lijo Antony,
- Linus Nielsen Feltzing, Marc Hoersken, Stanislav Ivochkin, Steve Holme,
- Yang Tse, Balaji Parasuram, Dan Fandrich, Bob Relyea, Gisle Vanem,
- Yves Arrouye, Kai Engert, Lluís Batlle i Rossell, Jirí Hruka,
- John E. Malmberg, Tor Arntsen, Matt Arsenault, Sergei Nikulov,
- Guenter Knauf, Craig Davison, Ulrich Doehner, Jiri Jaburek, Bruno de Carvalho,
- Eldar Zaitov
+ Alex Vinnik, Alessandro Ghedini, Nick Zitzmann, Kamil Dudka,
+ Lluis Batlle i Rossell, Nach M. S., Kim Vandry, Ben Greear, Dan Fandrich,
+ Dave Reisner, Evgeny Turnaev, Guenter Knauf, John E. Malmberg, Marc Hoersken,
+ Patrick Monnerat, Sergei Nikulov, Yang Tse, Andreas Malzahn, Clemens Gruber,
+ Jean-Noel Rouvignac, Markus Moeller, Fabian Keil, Dagobert Michelsen,
+ Byrial Jensen, Justin Karneges, Edward Rudd, Marc Doughty, Konstantin Isakov,
+ 
 
         Thanks! (and sorry if I forgot to mention someone)
 
 References to bug reports and discussions on issues:
 
- [1] = http://daniel.haxx.se/blog/2013/01/17/internally-were-all-multi-now/
- [2] = http://curl.haxx.se/mail/lib-2013-01/0191.html
- [3] = http://curl.haxx.se/mail/lib-2013-01/0130.html
- [4] = http://curl.haxx.se/bug/view.cgi?id=1180
- [5] = http://curl.haxx.se/mail/lib-2013-01/0045.html
- [6] = http://curl.haxx.se/mail/lib-2012-12/0246.html
- [7] = http://curl.haxx.se/bug/view.cgi?id=1173
- [8] = http://curl.haxx.se/mail/lib-2013-01/0250.html
- [9] = http://curl.haxx.se/mail/lib-2013-02/0004.html
- [10] = http://curl.haxx.se/mail/archive-2013-01/0017.html
- [11] = http://curl.haxx.se/bug/view.cgi?id=1171
- [12] = https://bugzilla.redhat.com/696783
- [13] = https://bugzilla.redhat.com/896544
- [14] = http://curl.haxx.se/mail/lib-2013-01/0295.html
- [15] = http://curl.haxx.se/bug/view.cgi?id=1186
- [16] = http://curl.haxx.se/bug/view.cgi?id=1187
- [17] = http://curl.haxx.se/docs/adv_20130206.html
+ [1] = http://curl.haxx.se/bug/view.cgi?id=1200
+ [2] = http://curl.haxx.se/bug/view.cgi?id=1180
+ [3] = http://curl.haxx.se/bug/view.cgi?id=1249
+ [4] = http://curl.haxx.se/bug/view.cgi?id=1191
+ [5] = http://curl.haxx.se/bug/view.cgi?id=1251
+ [6] = http://curl.haxx.se/mail/archive-2013-06/0052.html
+ [7] = http://curl.haxx.se/bug/view.cgi?id=1252
+ [8] = http://curl.haxx.se/mail/lib-2013-07/0046.html
+ [9] = http://curl.haxx.se/mail/lib-2013-07/0115.html
+ [10] = http://curl.haxx.se/mail/lib-2013-07/0103.html
+ [11] = http://curl.haxx.se/bug/view.cgi?id=496
+ [12] = http://curl.haxx.se/bug/view.cgi?id=1217
+ [13] = http://curl.haxx.se/mail/lib-2013-07/0258.html
+ [14] = http://curl.haxx.se/bug/view.cgi?id=758
+ [15] = http://curl.haxx.se/mail/lib-2013-07/0239.html
+ [16] = http://curl.haxx.se/bug/view.cgi?id=1255
+ [17] = http://curl.haxx.se/mail/archive-2013-07/0031.html
+ [18] = http://curl.haxx.se/bug/view.cgi?id=1262
+ [19] = http://curl.haxx.se/mail/lib-2013-08/0057.html

TODO-RELEASE

@@ -1,14 +1,4 @@
-To be addressed in 7.29
+To be addressed in ...
 =======================
 
-310 - a new authentication callback
-
-312 - custom Content-Length appears in CONNECT, solve it by offering a
-      separate option to provide headers for the CONNECT request:
-      http://curl.haxx.se/mail/lib-2012-09/0059.html
-
-317 - CURLINFO_SSL_TRUST to return SSL-specific data for a darwinssl build
-
-322 - pipelining improvements
-
 327 - 

acinclude.m4

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -1597,213 +1597,6 @@ AC_DEFUN([CURL_CHECK_FUNC_SEND], [
   fi
 ])
 
-
-dnl CURL_CHECK_FUNC_RECVFROM
-dnl -------------------------------------------------
-dnl Test if the socket recvfrom() function is available,
-dnl and check its return type and the types of its
-dnl arguments. If the function succeeds HAVE_RECVFROM
-dnl will be defined, defining the types of the arguments
-dnl in RECVFROM_TYPE_ARG1, RECVFROM_TYPE_ARG2, and so on
-dnl to RECVFROM_TYPE_ARG6, defining also the type of the
-dnl function return value in RECVFROM_TYPE_RETV.
-dnl Notice that the types returned for pointer arguments
-dnl will actually be the type pointed by the pointer.
-
-AC_DEFUN([CURL_CHECK_FUNC_RECVFROM], [
-  AC_REQUIRE([CURL_CHECK_HEADER_WINSOCK])dnl
-  AC_REQUIRE([CURL_CHECK_HEADER_WINSOCK2])dnl
-  AC_CHECK_HEADERS(sys/types.h sys/socket.h)
-  #
-  AC_MSG_CHECKING([for recvfrom])
-  AC_LINK_IFELSE([
-    AC_LANG_PROGRAM([[
-#undef inline
-#ifdef HAVE_WINDOWS_H
-#ifndef WIN32_LEAN_AND_MEAN
-#define WIN32_LEAN_AND_MEAN
-#endif
-#include <windows.h>
-#ifdef HAVE_WINSOCK2_H
-#include <winsock2.h>
-#else
-#ifdef HAVE_WINSOCK_H
-#include <winsock.h>
-#endif
-#endif
-#else
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#endif
-    ]],[[
-      recvfrom(0, 0, 0, 0, 0, 0);
-    ]])
-  ],[
-    AC_MSG_RESULT([yes])
-    curl_cv_recvfrom="yes"
-  ],[
-    AC_MSG_RESULT([no])
-    curl_cv_recvfrom="no"
-  ])
-  #
-  if test "$curl_cv_recvfrom" = "yes"; then
-    AC_CACHE_CHECK([types of args and return type for recvfrom],
-      [curl_cv_func_recvfrom_args], [
-      curl_cv_func_recvfrom_args="unknown"
-      for recvfrom_retv in 'int' 'ssize_t'; do
-        for recvfrom_arg1 in 'int' 'ssize_t' 'SOCKET'; do
-          for recvfrom_arg2 in 'char *' 'void *'; do
-            for recvfrom_arg3 in 'size_t' 'int' 'socklen_t' 'unsigned int'; do
-              for recvfrom_arg4 in 'int' 'unsigned int'; do
-                for recvfrom_arg5 in 'struct sockaddr *' 'void *' 'const struct sockaddr *'; do
-                  for recvfrom_arg6 in 'socklen_t *' 'int *' 'unsigned int *' 'size_t *' 'void *'; do
-                    if test "$curl_cv_func_recvfrom_args" = "unknown"; then
-                      AC_COMPILE_IFELSE([
-                        AC_LANG_PROGRAM([[
-#undef inline
-#ifdef HAVE_WINDOWS_H
-#ifndef WIN32_LEAN_AND_MEAN
-#define WIN32_LEAN_AND_MEAN
-#endif
-#include <windows.h>
-#ifdef HAVE_WINSOCK2_H
-#include <winsock2.h>
-#else
-#ifdef HAVE_WINSOCK_H
-#include <winsock.h>
-#endif
-#endif
-#define RECVFROMCALLCONV PASCAL
-#else
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#define RECVFROMCALLCONV
-#endif
-                          extern $recvfrom_retv RECVFROMCALLCONV
-                          recvfrom($recvfrom_arg1, $recvfrom_arg2,
-                                   $recvfrom_arg3, $recvfrom_arg4,
-                                   $recvfrom_arg5, $recvfrom_arg6);
-                        ]],[[
-                          $recvfrom_arg1 s=0;
-                          $recvfrom_arg2 buf=0;
-                          $recvfrom_arg3 len=0;
-                          $recvfrom_arg4 flags=0;
-                          $recvfrom_arg5 addr=0;
-                          $recvfrom_arg6 addrlen=0;
-                          $recvfrom_retv res=0;
-                          res = recvfrom(s, buf, len, flags, addr, addrlen);
-                        ]])
-                      ],[
-                        curl_cv_func_recvfrom_args="$recvfrom_arg1,$recvfrom_arg2,$recvfrom_arg3,$recvfrom_arg4,$recvfrom_arg5,$recvfrom_arg6,$recvfrom_retv"
-                      ])
-                    fi
-                  done
-                done
-              done
-            done
-          done
-        done
-      done
-    ]) # AC-CACHE-CHECK
-    # Nearly last minute change for this release starts here
-    AC_DEFINE_UNQUOTED(HAVE_RECVFROM, 1,
-      [Define to 1 if you have the recvfrom function.])
-    ac_cv_func_recvfrom="yes"
-    # Nearly last minute change for this release ends here
-    if test "$curl_cv_func_recvfrom_args" = "unknown"; then
-      AC_MSG_WARN([Cannot find proper types to use for recvfrom args])
-    else
-      recvfrom_prev_IFS=$IFS; IFS=','
-      set dummy `echo "$curl_cv_func_recvfrom_args" | sed 's/\*/\*/g'`
-      IFS=$recvfrom_prev_IFS
-      shift
-      #
-      recvfrom_ptrt_arg2=$[2]
-      recvfrom_qual_ptrt_arg5=$[5]
-      recvfrom_ptrt_arg6=$[6]
-      #
-      AC_DEFINE_UNQUOTED(RECVFROM_TYPE_ARG1, $[1],
-        [Define to the type of arg 1 for recvfrom.])
-      AC_DEFINE_UNQUOTED(RECVFROM_TYPE_ARG3, $[3],
-        [Define to the type of arg 3 for recvfrom.])
-      AC_DEFINE_UNQUOTED(RECVFROM_TYPE_ARG4, $[4],
-        [Define to the type of arg 4 for recvfrom.])
-      AC_DEFINE_UNQUOTED(RECVFROM_TYPE_RETV, $[7],
-        [Define to the function return type for recvfrom.])
-      #
-      prev_sh_opts=$-
-      #
-      case $prev_sh_opts in
-        *f*)
-          ;;
-        *)
-          set -f
-          ;;
-      esac
-      #
-      case "$recvfrom_qual_ptrt_arg5" in
-        const*)
-          recvfrom_qual_arg5=const
-          recvfrom_ptrt_arg5=`echo $recvfrom_qual_ptrt_arg5 | sed 's/^const //'`
-        ;;
-        *)
-          recvfrom_qual_arg5=
-          recvfrom_ptrt_arg5=$recvfrom_qual_ptrt_arg5
-        ;;
-      esac
-      #
-      recvfrom_type_arg2=`echo $recvfrom_ptrt_arg2 | sed 's/ \*//'`
-      recvfrom_type_arg5=`echo $recvfrom_ptrt_arg5 | sed 's/ \*//'`
-      recvfrom_type_arg6=`echo $recvfrom_ptrt_arg6 | sed 's/ \*//'`
-      #
-      AC_DEFINE_UNQUOTED(RECVFROM_TYPE_ARG2, $recvfrom_type_arg2,
-        [Define to the type pointed by arg 2 for recvfrom.])
-      AC_DEFINE_UNQUOTED(RECVFROM_QUAL_ARG5, $recvfrom_qual_arg5,
-        [Define to the type qualifier pointed by arg 5 for recvfrom.])
-      AC_DEFINE_UNQUOTED(RECVFROM_TYPE_ARG5, $recvfrom_type_arg5,
-        [Define to the type pointed by arg 5 for recvfrom.])
-      AC_DEFINE_UNQUOTED(RECVFROM_TYPE_ARG6, $recvfrom_type_arg6,
-        [Define to the type pointed by arg 6 for recvfrom.])
-      #
-      if test "$recvfrom_type_arg2" = "void"; then
-        AC_DEFINE_UNQUOTED(RECVFROM_TYPE_ARG2_IS_VOID, 1,
-          [Define to 1 if the type pointed by arg 2 for recvfrom is void.])
-      fi
-      if test "$recvfrom_type_arg5" = "void"; then
-        AC_DEFINE_UNQUOTED(RECVFROM_TYPE_ARG5_IS_VOID, 1,
-          [Define to 1 if the type pointed by arg 5 for recvfrom is void.])
-      fi
-      if test "$recvfrom_type_arg6" = "void"; then
-        AC_DEFINE_UNQUOTED(RECVFROM_TYPE_ARG6_IS_VOID, 1,
-          [Define to 1 if the type pointed by arg 6 for recvfrom is void.])
-      fi
-      #
-      case $prev_sh_opts in
-        *f*)
-          ;;
-        *)
-          set +f
-          ;;
-      esac
-      #
-      AC_DEFINE_UNQUOTED(HAVE_RECVFROM, 1,
-        [Define to 1 if you have the recvfrom function.])
-      ac_cv_func_recvfrom="yes"
-    fi
-  else
-    AC_MSG_WARN([Unable to link function recvfrom])
-  fi
-])
-
-
 dnl CURL_CHECK_MSG_NOSIGNAL
 dnl -------------------------------------------------
 dnl Check for MSG_NOSIGNAL
@@ -2826,8 +2619,10 @@ AC_HELP_STRING([--without-ca-path], [Don't use a default CA path]),
     fi
     capath="$want_capath"
     ca="no"
-  else
-    dnl neither of --with-ca-* given
+  elif test "x$cross_compiling" != "xyes"; then
+    dnl NOT cross-compiling and...
+    dnl neither of the --with-ca-* options are provided
+
     dnl first try autodetecting a CA bundle , then a CA path
     dnl both autodetections can be skipped by --without-ca-*
     ca="no"
@@ -2863,10 +2658,11 @@ AC_HELP_STRING([--without-ca-path], [Don't use a default CA path]),
         fi
       done
     fi
+  else
+    dnl no option given and cross-compiling
+    AC_MSG_WARN([skipped the ca-cert path detection when cross-compiling])
   fi
 
-
-
   if test "x$ca" != "xno"; then
     CURL_CA_BUNDLE='"'$ca'"'
     AC_DEFINE_UNQUOTED(CURL_CA_BUNDLE, "$ca", [Location of default ca bundle])

configure.ac

@@ -126,7 +126,7 @@ fi
 dnl figure out the libcurl version
 CURLVERSION=`$SED -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curlver.h`
 XC_CHECK_PROG_CC
-AM_INIT_AUTOMAKE
+XC_AUTOMAKE
 AC_MSG_CHECKING([curl version])
 AC_MSG_RESULT($CURLVERSION)
 
@@ -198,74 +198,50 @@ CURL_CONFIGURE_REENTRANT
 dnl check for how to do large files
 AC_SYS_LARGEFILE
 
-dnl support building of Windows DLLs
-AC_LIBTOOL_WIN32_DLL
+XC_LIBTOOL
 
-dnl force libtool to build static libraries with PIC on AMD64-Linux & FreeBSD
-AC_MSG_CHECKING([if arch-OS host is AMD64-Linux/FreeBSD (to build static libraries with PIC)])
-case $host in
-  x86_64*linux*|amd64*freebsd*|ia64*freebsd*)
-    AC_MSG_RESULT([yes])
-    with_pic=yes
-    ;;
-  *)
-    AC_MSG_RESULT([no])
-    ;;
-esac
+#
+# Automake conditionals based on libtool related checks
+#
 
-AC_MSG_CHECKING([if compiler is icc (to build with PIC)])
-case $CC in
-  icc | */icc)
-    AC_MSG_RESULT([yes])
-    with_pic=yes
-    ;;
-  *)
-    AC_MSG_RESULT([no])
-    ;;
-esac
+AM_CONDITIONAL([CURL_LT_SHLIB_USE_VERSION_INFO],
+  [test "x$xc_lt_shlib_use_version_info" = 'xyes'])
+AM_CONDITIONAL([CURL_LT_SHLIB_USE_NO_UNDEFINED],
+  [test "x$xc_lt_shlib_use_no_undefined" = 'xyes'])
+AM_CONDITIONAL([CURL_LT_SHLIB_USE_MIMPURE_TEXT],
+  [test "x$xc_lt_shlib_use_mimpure_text" = 'xyes'])
 
-dnl libtool setup
-AC_PROG_LIBTOOL
+#
+# Due to libtool and automake machinery limitations of not allowing
+# specifying separate CPPFLAGS or CFLAGS when compiling objects for
+# inclusion of these in shared or static libraries, we are forced to
+# build using separate configure runs for shared and static libraries
+# on systems where different CPPFLAGS or CFLAGS are mandatory in order
+# to compile objects for each kind of library. Notice that relying on
+# the '-DPIC' CFLAG that libtool provides is not valid given that the
+# user might for example choose to build static libraries with PIC.
+#
 
-AC_MSG_CHECKING([if we need -mimpure-text])
-mimpure=no
-case $host in
-  *-*-solaris2*)
-    if test "$GCC" = "yes"; then
-      mimpure="yes"
-    fi
-    ;;
-  *)
-    ;;
-esac
-AC_MSG_RESULT($mimpure)
-AM_CONDITIONAL(MIMPURE, test x$mimpure = xyes)
+#
+# Make our Makefile.am files use the staticlib CPPFLAG only when strictly
+# targeting a static library and not building its shared counterpart.
+#
+
+AM_CONDITIONAL([USE_CPPFLAG_CURL_STATICLIB],
+  [test "x$xc_lt_build_static_only" = 'xyes'])
+
+#
+# Make staticlib CPPFLAG variable and its definition visible in output
+# files unconditionally, providing an empty definition unless strictly
+# targeting a static library and not building its shared counterpart.
+#
+
+CPPFLAG_CURL_STATICLIB=
+if test "x$xc_lt_build_static_only" = 'xyes'; then
+  CPPFLAG_CURL_STATICLIB='-DCURL_STATICLIB'
+fi
+AC_SUBST([CPPFLAG_CURL_STATICLIB])
 
-AC_MSG_CHECKING([if we need BUILDING_LIBCURL])
-use_cppflag_building_libcurl="no"
-use_cppflag_curl_staticlib="no"
-CPPFLAG_CURL_STATICLIB=""
-case $host in
-  *-*-mingw*)
-    AC_MSG_RESULT(yes)
-    use_cppflag_building_libcurl="yes"
-    AC_MSG_CHECKING([if we need CURL_STATICLIB])
-    if test "X$enable_shared" = "Xno"
-    then
-      AC_MSG_RESULT(yes)
-      use_cppflag_curl_staticlib="yes"
-      CPPFLAG_CURL_STATICLIB="-DCURL_STATICLIB"
-    else
-      AC_MSG_RESULT(no)
-    fi
-    ;;
-  *)
-    AC_MSG_RESULT(no)
-    ;;
-esac
-AM_CONDITIONAL(USE_CPPFLAG_BUILDING_LIBCURL, test x$use_cppflag_building_libcurl = xyes)
-AM_CONDITIONAL(USE_CPPFLAG_CURL_STATICLIB, test x$use_cppflag_curl_staticlib = xyes)
-AC_SUBST(CPPFLAG_CURL_STATICLIB)
 
 # Determine whether all dependent libraries must be specified when linking
 if test "X$enable_shared" = "Xyes" -a "X$link_all_deplibs" = "Xno"
@@ -277,10 +253,6 @@ fi
 AC_SUBST(REQUIRE_LIB_DEPS)
 AM_CONDITIONAL(USE_EXPLICIT_LIB_DEPS, test x$REQUIRE_LIB_DEPS = xyes)
 
-dnl The install stuff has already been taken care of by the automake stuff
-dnl AC_PROG_INSTALL
-AC_PROG_MAKE_SET
-
 dnl check if there's a way to force code inline
 AC_C_INLINE
 
@@ -311,9 +283,6 @@ CURL_CHECK_COMPILER_ARRAY_SIZE_NEGATIVE
 CURL_CHECK_COMPILER_PROTOTYPE_MISMATCH
 CURL_CHECK_COMPILER_SYMBOL_HIDING
 
-CURL_CHECK_NO_UNDEFINED
-AM_CONDITIONAL(NO_UNDEFINED, test x$need_no_undefined = xyes)
-
 CURL_CHECK_CURLDEBUG
 AM_CONDITIONAL(CURLDEBUG, test x$want_curldebug = xyes)
 
@@ -2293,7 +2262,7 @@ fi
 
 if test "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED$POLARSSL_ENABLED$AXTLS_ENABLED$CYASSL_ENABLED$WINSSL_ENABLED$DARWINSSL_ENABLED" = "x"; then
   AC_MSG_WARN([SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more.])
-  AC_MSG_WARN([Use --with-ssl, --with-gnutls, --with-polarssl, --with-cyassl, --with-nss, --with-axtls or --with-winssl to address this.])
+  AC_MSG_WARN([Use --with-ssl, --with-gnutls, --with-polarssl, --with-cyassl, --with-nss, --with-axtls, --with-winssl, or --with-darwinssl to address this.])
 else
   # SSL is enabled, genericly
   AC_SUBST(SSL_ENABLED)
@@ -2613,8 +2582,10 @@ AC_MSG_RESULT(no)
 ]
 )
 
-AC_SUBST(VERSIONED_FLAVOUR, ["$versioned_symbols_flavour"])
-AM_CONDITIONAL(VERSIONED_SYMBOLS, test "x$versioned_symbols" = "xyes")
+AC_SUBST([CURL_LT_SHLIB_VERSIONED_FLAVOUR],
+  ["$versioned_symbols_flavour"])
+AM_CONDITIONAL([CURL_LT_SHLIB_USE_VERSIONED_SYMBOLS],
+  [test "x$versioned_symbols" = 'xyes'])
 
 dnl -------------------------------------------------
 dnl check winidn option before other IDN libraries
@@ -2997,7 +2968,6 @@ AC_TYPE_SIGNAL
 CURL_CHECK_FUNC_SELECT
 
 CURL_CHECK_FUNC_RECV
-CURL_CHECK_FUNC_RECVFROM
 CURL_CHECK_FUNC_SEND
 CURL_CHECK_MSG_NOSIGNAL
 
@@ -3039,12 +3009,10 @@ CURL_CHECK_FUNC_SIGSETJMP
 CURL_CHECK_FUNC_SOCKET
 CURL_CHECK_FUNC_SOCKETPAIR
 CURL_CHECK_FUNC_STRCASECMP
-CURL_CHECK_FUNC_STRCASESTR
 CURL_CHECK_FUNC_STRCMPI
 CURL_CHECK_FUNC_STRDUP
 CURL_CHECK_FUNC_STRERROR_R
 CURL_CHECK_FUNC_STRICMP
-CURL_CHECK_FUNC_STRLCAT
 CURL_CHECK_FUNC_STRNCASECMP
 CURL_CHECK_FUNC_STRNCMPI
 CURL_CHECK_FUNC_STRNICMP
@@ -3190,14 +3158,26 @@ if test "$want_thres" = "yes"; then
   AC_CHECK_HEADER(pthread.h,
     [ AC_DEFINE(HAVE_PTHREAD_H, 1, [if you have <pthread.h>])
       save_CFLAGS="$CFLAGS"
+
+      dnl first check for function without lib
+      AC_CHECK_FUNC(pthread_create, [USE_THREADS_POSIX=1] )
+
+      dnl if it wasn't found without lib, search for it in pthread lib
+      if test "$USE_THREADS_POSIX" != "1"
+      then
         CFLAGS="$CFLAGS -pthread"
         AC_CHECK_LIB(pthread, pthread_create,
-        [ AC_MSG_NOTICE([using POSIX threaded DNS lookup])
-          AC_DEFINE(USE_THREADS_POSIX, 1, [if you want POSIX threaded DNS lookup])
-          USE_THREADS_POSIX=1
-          curl_res_msg="threaded"
-        ],
+                     [USE_THREADS_POSIX=1],
                      [ CFLAGS="$save_CFLAGS"])
+      fi
+
+      if test "x$USE_THREADS_POSIX" = "x1"
+      then
+        AC_DEFINE(USE_THREADS_POSIX, 1, [if you want POSIX threaded DNS lookup])
+        curl_res_msg="POSIX threaded"
+      fi
+
+
   ])
 fi
 
@@ -3370,6 +3350,11 @@ dnl yes or no
 ENABLE_SHARED="$enable_shared"
 AC_SUBST(ENABLE_SHARED)
 
+dnl to let curl-config output the static libraries correctly
+ENABLE_STATIC="$enable_static"
+AC_SUBST(ENABLE_STATIC)
+
+
 dnl
 dnl For keeping supported features and protocols also in pkg-config file
 dnl since it is more cross-compile friendly than curl-config
@@ -3546,6 +3531,8 @@ AC_OUTPUT
 
 CURL_GENERATE_CONFIGUREHELP_PM
 
+XC_AMEND_DISTCLEAN([lib src tests/unit tests/server tests/libtest docs/examples])
+
 AC_MSG_NOTICE([Configured to build curl/libcurl:
 
   curl version:     ${CURLVERSION}

curl-config.in

@@ -155,7 +155,12 @@ while test $# -gt 0; do
         ;;
 
     --static-libs)
+        if test "X@ENABLE_STATIC@" != "Xno" ; then
           echo @libdir@/libcurl.@libext@ @LDFLAGS@ @LIBCURL_LIBS@
+        else
+          echo "curl was built with static libraries disabled" >&2
+          exit 1
+        fi
         ;;
 
     --configure)

curl-style.el

@@ -1,50 +0,0 @@
-;;;; Emacs Lisp help for writing curl code. ;;;;
-
-;;; The curl hacker's C conventions.
-;;; See the sample.emacs file on how this file can be made to take
-;;; effect automatically when editing curl source files.
-
-(defconst curl-c-style
-  '((c-basic-offset . 2)
-    (c-comment-only-line-offset . 0)
-    (c-hanging-braces-alist     . ((substatement-open before after)))
-    (c-offsets-alist . ((topmost-intro        . 0)
-			(topmost-intro-cont   . 0)
-			(substatement         . +)
-			(substatement-open    . 0)
-			(statement-case-intro . +)
-			(statement-case-open  . 0)
-			(case-label           . 0)
-			))
-    )
-  "Curl C Programming Style")
-
-(defun curl-code-cleanup ()
-  "no docs"
-  (interactive)
-  (untabify (point-min) (point-max))
-  (delete-trailing-whitespace)
-)
-
-;; Customizations for all of c-mode, c++-mode, and objc-mode
-(defun curl-c-mode-common-hook ()
-  "Curl C mode hook"
-  ;; add curl style and set it for the current buffer
-  (c-add-style "curl" curl-c-style t)
-  (setq tab-width 8
-	indent-tabs-mode nil		; Use spaces. Not tabs.
-	comment-column 40
-	c-font-lock-extra-types (append '("bool" "CURL" "CURLcode" "ssize_t" "size_t" "curl_socklen_t" "fd_set" "time_t" "curl_off_t" "curl_socket_t" "in_addr_t" "CURLSHcode" "CURLMcode" "Curl_addrinfo"))
-	)
-  ;; keybindings for C, C++, and Objective-C.  We can put these in
-  ;; c-mode-base-map because of inheritance ...
-  (define-key c-mode-base-map "\M-q" 'c-fill-paragraph)
-  (define-key c-mode-base-map "\M-m" 'curl-code-cleanup)
-  (setq c-recognize-knr-p nil)
-  ;;; (add-hook 'write-file-hooks 'delete-trailing-whitespace t)
-  (setq show-trailing-whitespace t)
-  )
-
-;; Set this is in your .emacs if you want to use the c-mode-hook as
-;; defined here right out of the box.
-; (add-hook 'c-mode-common-hook 'curl-c-mode-common-hook)

docs/BINDINGS

@@ -6,14 +6,14 @@
 
                                libcurl bindings
 
-Creative people have written bindings or interfaces for various environments
-and programming languages. Using one of these allows you to take advantage of
-curl powers from within your favourite language or system.
+ Creative people have written bindings or interfaces for various environments
+ and programming languages. Using one of these allows you to take advantage of
+ curl powers from within your favourite language or system.
 
-This is a list of all known interfaces as of this writing.
+ This is a list of all known interfaces as of this writing.
 
-The bindings listed below are not part of the curl/libcurl distribution
-archives, but must be downloaded and installed separately.
+ The bindings listed below are not part of the curl/libcurl distribution
+ archives, but must be downloaded and installed separately.
 
 Ada95
 
@@ -41,7 +41,10 @@ Ch
 
 Cocoa
 
-  Written by Dan Wood
+  BBHTTP: written by Bruno de Carvalho
+  https://github.com/brunodecarvalho/BBHTTP
+
+  curlhandle: Written by Dan Wood
   http://curlhandle.sourceforge.net/
 
 D
@@ -55,6 +58,7 @@ Dylan
   http://dylanlibs.sourceforge.net/
 
 Eiffel
+
   Written by Eiffel Software
   http://curl.haxx.se/libcurl/eiffel/
 
@@ -81,6 +85,11 @@ glib/GTK+
   Written by Richard Atterer
   http://atterer.net/glibcurl/
 
+Guile:
+
+  Written by Michael L. Gran
+  http://www.lonelycactus.com/guile-curl.html
+
 Haskell
 
   Written by Galois, Inc
@@ -91,6 +100,11 @@ Java
   Maintained by [blank]
   http://curl.haxx.se/libcurl/java/
 
+Julia
+
+  Written by Paul Howe
+  https://github.com/forio/Curl.jl
+
 Lisp
 
   Written by Liam Healy

docs/CONTRIBUTE

@@ -79,9 +79,9 @@
 1.3 What To Read
 
  Source code, the man pages, the INTERNALS document, TODO, KNOWN_BUGS, the
- most recent CHANGES. Just lurking on the libcurl mailing list is gonna give
- you a lot of insights on what's going on right now. Asking there is a good
- idea too.
+ most recent CHANGES. Just lurking on the curl-library mailing list is gonna
+ give you a lot of insights on what's going on right now. Asking there is a
+ good idea too.
 
 2. cURL Coding Standards
 
@@ -98,12 +98,12 @@
 
 2.2 Indenting
 
- Please try using the same indenting levels and bracing method as all the
- other code already does. It makes the source code a lot easier to follow if
- all of it is written using the same style. We don't ask you to like it, we
- just ask you to follow the tradition! ;-) This mainly means: 2-level indents,
- using spaces only (no tabs) and having the opening brace ({) on the same line
- as the if() or while().
+ Use the same indenting levels and bracing method as all the other code
+ already does. It makes the source code easier to follow if all of it is
+ written using the same style. We don't ask you to like it, we just ask you to
+ follow the tradition! ;-) This mainly means: 2-level indents, using spaces
+ only (no tabs) and having the opening brace ({) on the same line as the if()
+ or while().
 
  Also note that we use if() and while() with no space before the parenthesis.
 
@@ -151,6 +151,9 @@
  description exactly what they correct so that all patches can be selectively
  applied by the maintainer or other interested parties.
 
+ Also, separate patches enable bisecting much better when we track problems in
+ the future.
+
 2.9 Patch Against Recent Sources
 
  Please try to get the latest available sources to make your patches
@@ -178,6 +181,10 @@
  test case that verifies that it works as documented. If every submitter also
  posts a few test cases, it won't end up as a heavy burden on a single person!
 
+ If you don't have test cases or perhaps you have done something that is very
+ hard to write tests for, do explain exactly how you have otherwise tested and
+ verified your changes.
+
 3. Pushing Out Your Changes
 
 3.1 Write Access to git Repository
@@ -212,7 +219,7 @@
  commit.
 
  Now send those patches off to the curl-library list. You can of course opt to
- do that with the 'get send-email' command.
+ do that with the 'git send-email' command.
 
 3.3 How To Make a Patch without git
 

docs/FAQ

@@ -245,10 +245,10 @@ FAQ
   supervised in any way by the project.
 
   We still get help from companies. Haxx provides web site, bandwidth, mailing
-  lists etc and sourceforge.net hosts project services we take advantage from,
-  like the bug tracker. Also again, some companies have sponsored certain
-  parts of the development in the past and I hope some will continue to do so
-  in the future.
+  lists etc, sourceforge.net hosts project services we take advantage from,
+  like the bug tracker and github hosts the primary git repository. Also
+  again, some companies have sponsored certain parts of the development in the
+  past and I hope some will continue to do so in the future.
 
   If you want to support our project, consider a donation or a banner-program
   or even better: by helping us coding, documenting, testing etc.
@@ -309,17 +309,16 @@ FAQ
   never use it.
 
   In May 2012 Daniel did a counting game and came up with a number that may
-  be completely wrong or somewhat accurate. 300 million!
+  be completely wrong or somewhat accurate. Over 500 million!
 
   See http://daniel.haxx.se/blog/2012/05/16/300m-users/
 
   1.11 Why don't you update ca-bundle.crt
 
-  The ca-bundle.crt file that used to be bundled with curl was very outdated
-  (it being last modified year 2000 should tell) and must be replaced with a
-  much more modern and up-to-date version by anyone who wants to verify peers
-  anyway. It is no longer provided, the last curl release that shipped it was
-  curl 7.18.0.
+  The ca cert bundle that used to shipped with curl was very outdated and must
+  be replaced with an up-to-date version by anyone who wants to verify
+  peers. It is no longer provided by curl. The last curl release ever that
+  shipped a ca cert bundle was curl 7.18.0.
 
   In the cURL project we've decided not to attempt to keep this file updated
   (or even present anymore) since deciding what to add to a ca cert bundle is
@@ -433,10 +432,10 @@ FAQ
 
   That is an OpenSSL binary built for Windows.
 
-  Curl uses OpenSSL to do the SSL stuff. The LIBEAY32.DLL is what curl needs
-  on a windows machine to do https://. Check out the curl web site to find
-  accurate and up-to-date pointers to recent OpenSSL DLLs and other binary
-  packages.
+  Curl can be built with OpenSSL to do the SSL stuff. The LIBEAY32.DLL is then
+  what curl needs on a windows machine to do https:// etc. Check out the curl
+  web site to find accurate and up-to-date pointers to recent OpenSSL DLLs and
+  other binary packages.
 
   2.4 Does curl support SOCKS (RFC 1928) ?
 
@@ -472,9 +471,9 @@ FAQ
   3.3 Why doesn't my posting using -F work?
 
   You can't simply use -F or -d at your choice. The web server that will
-  receive your post assumes one of the formats. If the form you're trying to
-  "fake" sets the type to 'multipart/form-data', then and only then you must
-  use the -F type. In all the most common cases, you should use -d which then
+  receive your post expects one of the formats. If the form you're trying to
+  submit uses the type 'multipart/form-data', then and only then you must use
+  the -F type. In all the most common cases, you should use -d which then
   causes a posting with the type 'application/x-www-form-urlencoded'.
 
   This is described in some detail in the MANUAL and TheArtOfHttpScripting
@@ -502,9 +501,9 @@ FAQ
   3.6 Does curl support ASP, XML, XHTML or HTML version Y?
 
   To curl, all contents are alike. It doesn't matter how the page was
-  generated. It may be ASP, PHP, Perl, shell-script, SSI or plain
-  HTML-files. There's no difference to curl and it doesn't even know what kind
-  of language that generated the page.
+  generated. It may be ASP, PHP, Perl, shell-script, SSI or plain HTML
+  files. There's no difference to curl and it doesn't even know what kind of
+  language that generated the page.
 
   See also item 3.14 regarding javascript.
 
@@ -729,7 +728,7 @@ FAQ
   When passing on a URL to curl to use, it may respond that the particular
   protocol is not supported or disabled. The particular way this error message
   is phrased is because curl doesn't make a distinction internally of whether
-  a particular protocol is not supported (ie never got any code added that
+  a particular protocol is not supported (i.e. never got any code added that
   knows how to speak that protocol) or if it was explicitly disabled. curl can
   be built to only support a given set of protocols, and the rest would then
   be disabled or not supported.
@@ -1056,11 +1055,11 @@ FAQ
 
   4.19 Why doesn't cURL return an error when the network cable is unplugged?
 
-  Unplugging the cable is not an error situation. The TCP/IP protocol stack
+  Unplugging a cable is not an error situation. The TCP/IP protocol stack
   was designed to be fault tolerant, so even though there may be a physical
   break somewhere the connection shouldn't be affected, just possibly
   delayed.  Eventually, the physical break will be fixed or the data will be
-  re-routed around the physical problem.
+  re-routed around the physical problem through another path.
 
   In such cases, the TCP/IP stack is responsible for detecting when the
   network connection is irrevocably lost. Since with some protocols it is
@@ -1078,6 +1077,12 @@ FAQ
   falls too low, and --connect-timeout and --max-time can be used to put an
   overall timeout on the connection phase or the entire transfer.
 
+  A libcurl-using application running in a known physical environment (e.g.
+  an embedded device with only a single network connection) may want to act
+  immediately if its lone network connection goes down.  That can be achieved
+  by having the application monitor the network connection on its own using an
+  OS-specific mechanism, then signalling libcurl to abort (see also item 5.13).
+  
 
 5. libcurl Issues
 
@@ -1087,7 +1092,9 @@ FAQ
 
   We have written the libcurl code specifically adjusted for multi-threaded
   programs. libcurl will use thread-safe functions instead of non-safe ones if
-  your system has such.
+  your system has such.  Note that you must never share the same handle in
+  multiple threads.
+
 
   If you use a OpenSSL-powered libcurl in a multi-threaded environment, you
   need to provide one or two locking functions:

docs/FEATURES

@@ -13,27 +13,29 @@ curl tool
  - multiple file upload on a single command line
  - custom maximum transfer rate
  - redirectable stderr
+ - metalink support (*13)
 
-libcurl supports
+libcurl
  - full URL syntax with no length limit
  - custom maximum download time
  - custom least download speed acceptable
  - custom output result after completion
  - guesses protocol from host name unless specified
  - uses .netrc
- - progress bar/time specs while downloading
+ - progress bar with time statistics while downloading
  - "standard" proxy environment variables support
  - compiles on win32 (reported builds on 40+ operating systems)
  - selectable network interface for outgoing traffic
  - IPv6 support on unix and Windows
  - persistent connections
  - socks5 support
- - supports user name + password in proxy environment variables
+ - supports user name and password in proxy environment variables
  - operations through proxy "tunnel" (using CONNECT)
- - supports large files (>2GB and >4GB) both upload/download
+ - support for large files (>2GB and >4GB) during upload and download
  - replaceable memory functions (malloc, free, realloc, etc)
  - asynchronous name resolving (*6)
  - both a push and a pull style interface
+ - international domain names (*11)
 
 HTTP
  - HTTP/1.1 compliant (optionally uses 1.0)
@@ -60,7 +62,8 @@ HTTP
  - via http-proxy
  - retrieve file modification date
  - Content-Encoding support for deflate and gzip
- - "Transfer-Encoding: chunked" support for "uploads"
+ - "Transfer-Encoding: chunked" support in uploads
+ - data compression (*12)
 
 HTTPS (*1)
  - (all the HTTP features)
@@ -68,12 +71,13 @@ HTTPS (*1)
  - verify server certificate
  - via http-proxy
  - select desired encryption
- - force usage of a specific SSL version (SSLv2(*7), SSLv3 or TLSv1)
+ - force usage of a specific SSL version (SSLv2 (*7), SSLv3 (*10) or TLSv1)
 
 FTP
  - download
  - authentication
- - kerberos4 (*5), kerberos5 (*3)
+ - kerberos4 (*5)
+ - kerberos5 (*3)
  - active/passive using PORT, EPRT, PASV or EPSV
  - single file size information (compare to HTTP HEAD)
  - 'type=' URL support
@@ -93,7 +97,7 @@ FTP
 
 FTPS (*1)
  - implicit ftps:// support that use SSL on both connections
- - explicit "AUTH TSL" and "AUTH SSL" usage to "upgrade" plain ftp://
+ - explicit "AUTH TLS" and "AUTH SSL" usage to "upgrade" plain ftp://
    connection to use SSL for both or one of the connections
 
 SCP (*8)
@@ -104,7 +108,8 @@ SFTP (*8)
  - with custom commands sent before/after the transfer
 
 TFTP
- - download / upload
+ - download
+ - upload
 
 TELNET
  - connection negotiation
@@ -119,12 +124,12 @@ DICT
 
 FILE
  - URL support
- - "uploads"
+ - upload
  - resume
 
 SMTP
  - authentication: Plain, Login, CRAM-MD5, Digest-MD5 and NTLM (*9)
- - send mail
+ - send e-mails
  - mail from support
  - mail size support
  - mail auth support for trusted server-to-server relaying
@@ -142,7 +147,8 @@ POP3
    NTLM (*9)
  - list e-mails
  - retrieve e-mails
- - enhanced command support for: CAPA, DELE, TOP, STAT, UIDL and NOOP
+ - enhanced command support for: CAPA, DELE, TOP, STAT, UIDL and NOOP via
+   custom requests
  - via http-proxy
 
 POP3S (*1)
@@ -152,10 +158,14 @@ POP3S (*1)
 
 IMAP
  - authentication: Clear Text and SASL
- - select mailbox
- - basic fetch e-mail support
  - SASL based authentication: Plain, Login, CRAM-MD5, Digest-MD5 and
    NTLM (*9)
+ - list the folders of a mailbox
+ - select a mailbox with support for verifing the UIDVALIDITY
+ - fetch e-mails with support for specifing the UID and SECTION
+ - upload e-mails via the append command
+ - enhanced command support for: EXAMINE, CREATE, DELETE, RENAME, STATUS,
+   STORE, COPY and UID via custom requests
  - via http-proxy
 
 IMAPS (*1)
@@ -169,10 +179,18 @@ FOOTNOTES
   *1 = requires OpenSSL, GnuTLS, NSS, yassl, axTLS, PolarSSL, schannel (native
        Windows), Secure Transport (native iOS/OS X) or qssl (native IBM i)
   *2 = requires OpenLDAP
-  *3 = requires a GSSAPI-compliant library, such as Heimdal or similar.
+  *3 = requires a GSSAPI-compliant library, such as Heimdal or similar
   *4 = requires FBopenssl
-  *5 = requires a krb4 library, such as the MIT one or similar.
+  *5 = requires a krb4 library, such as the MIT one or similar
   *6 = requires c-ares
-  *7 = requires OpenSSL or NSS, as GnuTLS only supports SSLv3 and TLSv1
+  *7 = requires OpenSSL, NSS, qssl, schannel or Secure Transport; GnuTLS, for
+       example, only supports SSLv3 and TLSv1
   *8 = requires libssh2
-  *9 = requires OpenSSL, GnuTLS, NSS, yassl or SSPI (native Windows)
+  *9 = requires OpenSSL, GnuTLS, NSS, yassl, Secure Transport or SSPI (native
+       Windows)
+  *10 = requires any of the SSL libraries in (*1) above other than axTLS, which
+        does not support SSLv3
+  *11 = requires libidn or Windows
+  *12 = requires libz
+  *13 = requires libmetalink, and either an Apple or Microsoft operating
+        system, or OpenSSL, or GnuTLS, or NSS

docs/HISTORY

@@ -7,19 +7,19 @@
                           How cURL Became Like This
 
 
-In the second half of 1997, Daniel Stenberg came up with the idea to make
+Towards the end of 1996, Daniel Stenberg came up with the idea to make
 currency-exchange calculations available to Internet Relay Chat (IRC)
 users. All the necessary data are published on the Web; he just needed to
 automate their retrieval.
 
 Daniel simply adopted an existing command-line open-source tool, httpget, that
-Brazilian Rafael Sagula had written. After a few minor adjustments, it did
-just what he needed.
+Brazilian Rafael Sagula had written and recently release version 0.1 of. After
+a few minor adjustments, it did just what he needed. HttpGet 1.0 was released
+on April 8th 1997 with brand new HTTP proxy support.
 
-Soon, he found currencies on a GOPHER site, so support for that had to go in,
-and not before long FTP download support was added as well. The name of the
-project was changed to urlget to better fit what it actually did now, since
-the http-only days were already passed.
+We soon found and fixed support for getting currencies over GOPHER.  Once FTP
+download support was added, the name of the project was changed and urlget 2.0
+was released in August 1997. The http-only days were already passed.
 
 The project slowly grew bigger. When upload capabilities were added and the
 name once again was misleading, a second name change was made and on March 20,

docs/INSTALL

@@ -220,8 +220,8 @@ Win32
    adjust as necessary. It is also possible to override these paths with
    environment variables, for example:
 
-     set ZLIB_PATH=c:\zlib-1.2.7
-     set OPENSSL_PATH=c:\openssl-0.9.8x
+     set ZLIB_PATH=c:\zlib-1.2.8
+     set OPENSSL_PATH=c:\openssl-0.9.8y
      set LIBSSH2_PATH=c:\libssh2-1.4.3
 
    ATTENTION: if you want to build with libssh2 support you have to use latest
@@ -323,7 +323,7 @@ Win32
    documentation on how to compile zlib. Define the ZLIB_PATH environment
    variable to the location of zlib.h and zlib.lib, for example:
 
-     set ZLIB_PATH=c:\zlib-1.2.7
+     set ZLIB_PATH=c:\zlib-1.2.8
 
    Then run 'nmake vc-zlib' in curl's root directory.
 
@@ -337,7 +337,7 @@ Win32
    Before running nmake define the OPENSSL_PATH environment variable with
    the root/base directory of OpenSSL, for example:
 
-     set OPENSSL_PATH=c:\openssl-0.9.8x
+     set OPENSSL_PATH=c:\openssl-0.9.8y
 
    Then run 'nmake vc-ssl' or 'nmake vc-ssl-dll' in curl's root
    directory.  'nmake vc-ssl' will create a libcurl static and dynamic
@@ -359,7 +359,7 @@ Win32
    source distribution archive to allow proper building of the two included
    projects, the libcurl library and the curl tool.
 
-   1) Open the vc6curl.dsw workspace with MSVC6's IDE.
+   1) Open the vs/vc6/vc6curl.dsw workspace with MSVC6's IDE.
    2) Select 'Build' from top menu.
    3) Select 'Batch Build' from dropdown menu.
    4) Make sure that the eight project configurations are 'checked'.
@@ -367,12 +367,12 @@ Win32
    6) Once the eight project configurations are built you are done.
 
    Dynamic and static libcurl libraries are built in debug and release flavours,
-   and can be located each one in its own subdirectory, DLL-Debug, DLL-Release,
-   LIB-Debug and LIB-Release, all of them below the 'lib' subdirectory.
+   and can be located each one in its own subdirectory, dll-debug, dll-release,
+   lib-debug and lib-release, all of them below the 'vs/vc6/lib' subdirectory.
 
    In the same way four curl executables are created, each using its respective
    library. The resulting curl executables are located in its own subdirectory,
-   DLL-Debug, DLL-Release, LIB-Debug and LIB-Release, below the 'src' subdir.
+   dll-debug, dll-release, lib-debug and lib-release, below 'vs/vc6/src' subdir.
 
    These reference VC++ 6.0 configurations are generated using the dynamic CRT.
 
@@ -876,7 +876,7 @@ VxWorks
 Android
 =======
    Method using the static makefile:
-      - see the build notes in the Android.mk file.
+      - see the build notes in the packages/Android/Android.mk file.
 
    Method using a configure cross-compile (tested with Android NDK r7c, r8):
       - prepare the toolchain of the Android NDK for standalone use; this can
@@ -1045,7 +1045,7 @@ PORTS
         - Alpha OpenVMS V7.1-1H2
         - Alpha Tru64 v5.0 5.1
         - AVR32 Linux
-        - ARM Android 1.5, 2.1
+        - ARM Android 1.5, 2.1, 2.3, 3.2, 4.x
         - ARM INTEGRITY
         - ARM iOS
         - Cell Linux
@@ -1116,6 +1116,7 @@ GNU GSS      http://www.gnu.org/software/gss/
 GnuTLS       http://www.gnu.org/software/gnutls/
 Heimdal      http://www.pdc.kth.se/heimdal/
 libidn       http://www.gnu.org/software/libidn/
+libmetalink  https://launchpad.net/libmetalink/
 libssh2      http://www.libssh2.org/
 MIT Kerberos http://web.mit.edu/kerberos/www/dist/
 NSS          http://www.mozilla.org/projects/security/pki/nss/

docs/INTERNALS

@@ -42,7 +42,7 @@ Portability
  cyassl       2.0.0
  openldap     2.0
  MIT krb5 lib 1.2.4
- qsossl       V5R2M0
+ qsossl       V5R3M0
  NSS          3.12.x
  axTLS        1.2.7
  Heimdal      ?
@@ -52,7 +52,7 @@ Portability
  curl running fine on:
 
  Windows      98
- AS/400       V5R2M0
+ AS/400       V5R3M0
  Symbian      9.1
  Windows CE   ?
  TPF          ?
@@ -111,6 +111,9 @@ Windows vs Unix
 Library
 =======
 
+ (See LIBCURL-STRUCTS for a separate document describing all major internal
+ structs and their purposes.)
+
  There are plenty of entry points to the library, namely each publicly defined
  function that libcurl offers to applications. All of those functions are
  rather small and easy-to-follow. All the ones prefixed with 'curl_easy' are
@@ -135,16 +138,18 @@ Library
  options is documented in the man page. This function mainly sets things in
  the 'SessionHandle' struct.
 
- curl_easy_perform() does a whole lot of things:
+ curl_easy_perform() is just a wrapper function that makes use of the multi
+ API.  It basically curl_multi_init(), curl_multi_add_handle(),
+ curl_multi_wait(), and curl_multi_perform() until the transfer is done and
+ then returns.
 
- It starts off in the lib/easy.c file by calling Curl_perform() and the main
- work then continues in lib/url.c. The flow continues with a call to
- Curl_connect() to connect to the remote site.
+ Some of the most important key functions in url.c are called from multi.c
+ when certain key steps are to be made in the transfer operation.
 
  o Curl_connect()
 
-   ... analyzes the URL, it separates the different components and connects to
-   the remote host. This may involve using a proxy and/or using SSL. The
+   Analyzes the URL, it separates the different components and connects to the
+   remote host. This may involve using a proxy and/or using SSL. The
    Curl_resolv() function in lib/hostip.c is used for looking up host names
    (it does then use the proper underlying method, which may vary between
    platforms and builds).
@@ -160,10 +165,7 @@ Library
  o Curl_do()
 
    Curl_do() makes sure the proper protocol-specific function is called. The
-   functions are named after the protocols they handle. Curl_ftp(),
-   Curl_http(), Curl_dict(), etc. They all reside in their respective files
-   (ftp.c, http.c and dict.c). HTTPS is handled by Curl_http() and FTPS by
-   Curl_ftp().
+   functions are named after the protocols they handle.
 
    The protocol-specific functions of course deal with protocol-specific
    negotiations and setup. They have access to the Curl_sendf() (from
@@ -182,10 +184,9 @@ Library
    be called with some basic info about the upcoming transfer: what socket(s)
    to read/write and the expected file transfer sizes (if known).
 
- o Transfer()
+ o Curl_readwrite()
 
-   Curl_perform() then calls Transfer() in lib/transfer.c that performs the
-   entire file transfer.
+   Called during the transfer of the actual protocol payload.
 
    During transfer, the progress functions in lib/progress.c are called at a
    frequent interval (or at the user's choice, a specified callback might get
@@ -207,33 +208,11 @@ Library
    used. This function is only used when we are certain that no more transfers
    is going to be made on the connection. It can be also closed by force, or
    it can be called to make sure that libcurl doesn't keep too many
-   connections alive at the same time (there's a default amount of 5 but that
-   can be changed with the CURLOPT_MAXCONNECTS option).
+   connections alive at the same time.
 
    This function cleans up all resources that are associated with a single
    connection.
 
- Curl_perform() is the function that does the main "connect - do - transfer -
- done" loop. It loops if there's a Location: to follow.
-
- When completed, the curl_easy_cleanup() should be called to free up used
- resources. It runs Curl_disconnect() on all open connections.
-
- A quick roundup on internal function sequences (many of these call
- protocol-specific function-pointers):
-
-  Curl_connect - connects to a remote site and does initial connect fluff
-   This also checks for an existing connection to the requested site and uses
-   that one if it is possible.
-
-   Curl_do - starts a transfer
-    Curl_handler::do_it() - transfers data
-   Curl_done - ends a transfer
-
-  Curl_disconnect - disconnects from a remote site. This is called when the
-   disconnect is really requested, which doesn't necessarily have to be
-   exactly after curl_done in case we want to keep the connection open for
-   a while.
 
  HTTP(S)
 
@@ -316,48 +295,38 @@ Persistent Connections
    hold connection-oriented data. It is meant to hold the root data as well as
    all the options etc that the library-user may choose.
  o The 'SessionHandle' struct holds the "connection cache" (an array of
-   pointers to 'connectdata' structs). There's one connectdata struct
-   allocated for each connection that libcurl knows about. Note that when you
-   use the multi interface, the multi handle will hold the connection cache
-   and not the particular easy handle. This of course to allow all easy handles
-   in a multi stack to be able to share and re-use connections.
+   pointers to 'connectdata' structs).
  o This enables the 'curl handle' to be reused on subsequent transfers.
- o When we are about to perform a transfer with curl_easy_perform(), we first
-   check for an already existing connection in the cache that we can use,
-   otherwise we create a new one and add to the cache. If the cache is full
-   already when we add a new connection, we close one of the present ones. We
-   select which one to close dependent on the close policy that may have been
-   previously set.
- o When the transfer operation is complete, we try to leave the connection
-   open. Particular options may tell us not to, and protocols may signal
-   closure on connections and then we don't keep it open of course.
+ o When libcurl is told to perform a transfer, it first checks for an already
+   existing connection in the cache that we can use. Otherwise it creates a
+   new one and adds that the cache. If the cache is full already when a new
+   conncetion is added added, it will first close the oldest unused one.
+ o When the transfer operation is complete, the connection is left
+   open. Particular options may tell libcurl not to, and protocols may signal
+   closure on connections and then they won't be kept open of course.
  o When curl_easy_cleanup() is called, we close all still opened connections,
    unless of course the multi interface "owns" the connections.
 
- You do realize that the curl handle must be re-used in order for the
- persistent connections to work.
+ The curl handle must be re-used in order for the persistent connections to
+ work.
 
 multi interface/non-blocking
 ============================
 
- We make an effort to provide a non-blocking interface to the library, the
- multi interface. To make that interface work as good as possible, no
- low-level functions within libcurl must be written to work in a blocking
- manner.
+ The multi interface is a non-blocking interface to the library. To make that
+ interface work as good as possible, no low-level functions within libcurl
+ must be written to work in a blocking manner. (There are still a few spots
+ violating this rule.)
 
  One of the primary reasons we introduced c-ares support was to allow the name
  resolve phase to be perfectly non-blocking as well.
 
- The ultimate goal is to provide the easy interface simply by wrapping the
- multi interface functions and thus treat everything internally as the multi
- interface is the single interface we have.
-
- The FTP and the SFTP/SCP protocols are thus perfect examples of how we adapt
- and adjust the code to allow non-blocking operations even on multi-stage
- protocols. They are built around state machines that return when they could
- block waiting for data.  The DICT, LDAP and TELNET protocols are crappy
- examples and they are subject for rewrite in the future to better fit the
- libcurl protocol family.
+ The FTP and the SFTP/SCP protocols are examples of how we adapt and adjust
+ the code to allow non-blocking operations even on multi-stage command-
+ response protocols. They are built around state machines that return when
+ they would otherwise block waiting for data.  The DICT, LDAP and TELNET
+ protocols are crappy examples and they are subject for rewrite in the future
+ to better fit the libcurl protocol family.
 
 SSL libraries
 =============
@@ -408,12 +377,12 @@ API/ABI
 Client
 ======
 
- main() resides in src/main.c together with most of the client code.
+ main() resides in src/tool_main.c.
 
  src/tool_hugehelp.c is automatically generated by the mkhelp.pl perl script
- to display the complete "manual" and the src/urlglob.c file holds the
- functions used for the URL-"globbing" support. Globbing in the sense that
- the {} and [] expansion stuff is there.
+ to display the complete "manual" and the src/tool_urlglob.c file holds the
+ functions used for the URL-"globbing" support. Globbing in the sense that the
+ {} and [] expansion stuff is there.
 
  The client mostly messes around to setup its 'config' struct properly, then
  it calls the curl_easy_*() functions of the library and when it gets back
@@ -425,8 +394,8 @@ Client
  curl_easy_getinfo() function to extract useful information from the curl
  session.
 
- Recent versions may loop and do all this several times if many URLs were
- specified on the command line or config file.
+ It may loop and do all this several times if many URLs were specified on the
+ command line or config file.
 
 Memory Debugging
 ================

docs/KNOWN_BUGS

@@ -3,6 +3,25 @@ join in and help us correct one or more of these! Also be sure to check the
 changelog of the current development status, as one or more of these problems
 may have been fixed since this was written!
 
+83. curl is unable to load non-default openssl engines, because openssl isn't
+  initialized properly. This seems to require OpenSSL_config() or
+  CONF_modules_load_file() to be used by libcurl but the first seems to not
+  work and we've gotten not reports from tests with the latter. Possibly we
+  need to discuss with OpenSSL developers how this is supposed to be done. We
+  need users with actual external openssl engines for testing to work on this.
+  http://curl.haxx.se/bug/view.cgi?id=1208
+
+82. When building with the Windows Borland compiler, it fails because the
+  "tlib" tool doesn't support hyphens (minus signs) in file names and we have
+  such in the build.
+  http://curl.haxx.se/bug/view.cgi?id=1222
+
+81. When using -J (with -O), automaticly resumed downloading together with "-C
+  -" fails. Without -J the same command line works! This happens because the
+  resume logic is worked out before the target file name (and thus its
+  pre-transfer size) has been figured out!
+  http://curl.haxx.se/bug/view.cgi?id=1169
+
 80. Curl doesn't recognize certificates in DER format in keychain, but it
   works with PEM.
   http://curl.haxx.se/bug/view.cgi?id=3439999
@@ -85,13 +104,6 @@ may have been fixed since this was written!
   CURLOPT_FAILONERROR with FTP to detect if a file exists or not, but it is
   not working: http://curl.haxx.se/mail/lib-2008-07/0295.html
 
-57. On VMS-Alpha: When using an http-file-upload the file is not sent to the
-  Server with the correct content-length.  Sending a file with 511 or less
-  bytes, content-length 512 is used.  Sending a file with 513 - 1023 bytes,
-  content-length 1024 is used.  Files with a length of a multiple of 512 Bytes
-  show the correct content-length. Only these files work for upload.
-  http://curl.haxx.se/bug/view.cgi?id=2057858
-
 56. When libcurl sends CURLOPT_POSTQUOTE commands when connected to a SFTP
   server using the multi interface, the commands are not being sent correctly
   and instead the connection is "cancelled" (the operation is considered done)
@@ -169,12 +181,6 @@ may have been fixed since this was written!
   We probably have even more bugs and lack of features when a SOCKS proxy is
   used.
 
-22. Sending files to a FTP server using curl on VMS, might lead to curl
-  complaining on "unaligned file size" on completion. The problem is related
-  to VMS file structures and the perceived file sizes stat() returns. A
-  possible fix would involve sending a "STRU VMS" command.
-  http://curl.haxx.se/bug/view.cgi?id=1156287
-
 21. FTP ASCII transfers do not follow RFC959. They don't convert the data
    accordingly (not for sending nor for receiving). RFC 959 section 3.1.1.1
    clearly describes how this should be done:

docs/LIBCURL-STRUCTS

@@ -0,0 +1,245 @@
+                                  _   _ ____  _
+                              ___| | | |  _ \| |
+                             / __| | | | |_) | |
+                            | (__| |_| |  _ <| |___
+                             \___|\___/|_| \_\_____|
+
+Structs in libcurl
+
+This document should cover 7.32.0 pretty accurately, but will make sense even
+for older and later versions as things don't change drastically that often.
+
+ 1. The main structs in libcurl
+  1.1 SessionHandle
+  1.2 connectdata
+  1.3 Curl_multi
+  1.4 Curl_handler
+  1.5 conncache
+  1.6 Curl_share
+  1.7 CookieInfo
+
+==============================================================================
+
+1. The main structs in libcurl
+
+  1.1 SessionHandle
+
+  The SessionHandle handle struct is the one returned to the outside in the
+  external API as a "CURL *". This is usually known as an easy handle in API
+  documentations and examples.
+
+  Information and state that is related to the actual connection is in the
+  'connectdata' struct. When a transfer is about to be made, libcurl will
+  either create a new connection or re-use an existing one. The particular
+  connectdata that is used by this handle is pointed out by
+  SessionHandle->easy_conn.
+
+  Data and information that regard this particular single transfer is put in
+  the SingleRequest sub-struct.
+
+  When the SessionHandle struct is added to a multi handle, as it must be in
+  order to do any transfer, the ->multi member will point to the Curl_multi
+  struct it belongs to. The ->prev and ->next members will then be used by the
+  multi code to keep a linked list of SessionHandle structs that are added to
+  that same multi handle. libcurl always uses multi so ->multi *will* point to
+  a Curl_multi when a transfer is in progress.
+
+  ->mstate is the multi state of this particular SessionHandle. When
+  multi_runsingle() is called, it will act on this handle according to which
+  state it is in. The mstate is also what tells which sockets to return for a
+  speicific SessionHandle when curl_multi_fdset() is called etc.
+
+  The libcurl source code generally use the name 'data' for the variable that
+  points to the SessionHandle.
+
+
+  1.2 connectdata
+
+  A general idea in libcurl is to keep connections around in a connection
+  "cache" after they have been used in case they will be used again and then
+  re-use an existing one instead of creating a new as it creates a significant
+  performance boost.
+
+  Each 'connectdata' identifies a single physical conncetion to a server. If
+  the connection can't be kept alive, the connection will be closed after use
+  and then this struct can be removed from the cache and freed.
+
+  Thus, the same SessionHandle can be used multiple times and each time select
+  another connectdata struct to use for the connection. Keep this in mind, as
+  it is then important to consider if options or choices are based on the
+  connection or the SessionHandle.
+
+  Functions in libcurl will assume that connectdata->data points to the
+  SessionHandle that uses this connection.
+
+  As a special complexity, some protocols supported by libcurl require a
+  special disconnect procedure that is more than just shutting down the
+  socket. It can involve sending one or more commands to the server before
+  doing so. Since connections are kept in the connection cache after use, the
+  original SessionHandle may no longer be around when the time comes to shut
+  down a particular connection. For this purpose, libcurl holds a special
+  dummy 'closure_handle' SessionHandle in the Curl_multi struct to 
+
+  FTP uses two TCP connections for a typical transfer but it keeps both in
+  this single struct and thus can be considered a single connection for most
+  internal concerns.
+
+  The libcurl source code generally use the name 'conn' for the variable that
+  points to the connectdata.
+
+
+  1.3 Curl_multi
+
+  Internally, the easy interface is implemented as a wrapper around multi
+  interface functions. This makes everything multi interface.
+
+  Curl_multi is the multi handle struct exposed as "CURLM *" in external APIs.
+
+  This struct holds a list of SessionHandle structs that have been added to
+  this handle with curl_multi_add_handle(). The start of the list is ->easyp
+  and ->num_easy is a counter of added SessionHandles.
+
+  ->msglist is a linked list of messages to send back when
+  curl_multi_info_read() is called. Basically a node is added to that list
+  when an individual SessionHandle's transfer has completed.
+
+  ->hostcache points to the name cache. It is a hash table for looking up name
+  to IP. The nodes have a limited life time in there and this cache is meant
+  to reduce the time for when the same name is wanted within a short period of
+  time.
+
+  ->timetree points to a tree of SessionHandles, sorted by the remaining time
+  until it should be checked - normally some sort of timeout. Each
+  SessionHandle has one node in the tree.
+
+  ->sockhash is a hash table to allow fast lookups of socket descriptor to
+  which SessionHandle that uses that descriptor. This is necessary for the
+  multi_socket API.
+
+  ->conn_cache points to the connection cache. It keeps track of all
+  connections that are kept after use. The cache has a maximum size.
+
+  ->closure_handle is described in the 'connectdata' section.
+
+  The libcurl source code generally use the name 'multi' for the variable that
+  points to the Curl_multi struct.
+
+
+  1.4 Curl_handler
+
+  Each unique protocol that is supported by libcurl needs to provide at least
+  one Curl_handler struct. It defines what the protocol is called and what
+  functions the main code should call to deal with protocol specific issues.
+  In general, there's a source file named [protocol].c in which there's a
+  "struct Curl_handler Curl_handler_[protocol]" declared. In url.c there's
+  then the main array with all individual Curl_handler structs pointed to from
+  a single array which is scanned through when a URL is given to libcurl to
+  work with.
+
+  ->scheme is the URL scheme name, usually spelled out in uppercase. That's
+  "HTTP" or "FTP" etc. SSL versions of the protcol need its own Curl_handler
+  setup so HTTPS separate from HTTP.
+
+  ->setup_connection is called to allow the protocol code to allocate protocol
+  specific data that then gets associated with that SessionHandle for the rest
+  of this transfer. It gets freed again at the end of the transfer. It will be
+  called before the 'connectdata' for the transfer has been selected/created.
+  Most protocols will allocate its private 'struct [PROTOCOL]' here and assign
+  SessionHandle->req.protop to point to it.
+
+  ->connect_it allows a protocol to do some specific actions after the TCP
+  connect is done, that can still be considered part of the connection phase.
+
+  Some protocols will alter the connectdata->recv[] and connectdata->send[]
+  function pointers in this function.
+
+  ->connecting is similarly a function that keeps getting called as long as the
+  protocol considers itself still in the connecting phase.
+
+  ->do_it is the function called to issue the transfer request. What we call
+  the DO action internally. If the DO is not enough and things need to be kept
+  getting done for the entier DO sequence to complete, ->doing is then usually
+  also provided. Each protocol that needs to do multiple commands or similar
+  for do/doing need to implement their own state machines (see SCP, SFTP,
+  FTP). Some protocols (only FTP and only due to historical reasons) has a
+  separate piece of the DO state called DO_MORE.
+
+  ->doing keeps getting called while issudeing the transfer request command(s)
+
+  ->done gets called when the transfer is complete and DONE. That's after the
+  main data has been transferred.
+
+  ->do_more gets called doring the DO_MORE state. The FTP protocol uses this
+  state when setting up the second connection.
+
+  ->proto_getsock
+  ->doing_getsock
+  ->domore_getsock
+  ->perform_getsock
+  Functions that return socket information. Which socket(s) to wait for which
+  action(s) during the particular multi state.
+
+  ->disconnect is called immediately before the TCP connection is shutdown.
+
+  ->readwrite gets called during transfer to allow the protocol to do extra
+  reads/writes
+
+  ->defport is the default report TCP or UDP port this protocol uses
+
+  ->protocol is one or more bits in the CURLPROTO_* set. The SSL versions have
+  their "base" protocol set and then the SSL variation. Like "HTTP|HTTPS".
+
+  ->flags is a bitmask with additional information about the protocol that will
+  make it get treated differently by the generic engine:
+
+    PROTOPT_SSL - will make it connect and negotiate SSL
+
+    PROTOPT_DUAL - this protocol uses two connections
+
+    PROTOPT_CLOSEACTION - this protocol has actions to do before closing the
+    connection. This flag is no longer used by code, yet still set for a bunch
+    protocol handlers.
+  
+    PROTOPT_DIRLOCK - "direction lock". The SSH protocols set this bit to
+    limit which "direction" of socket actions that the main engine will
+    concern itself about.
+
+    PROTOPT_NONETWORK - a protocol that doesn't use network (read file:)
+
+    PROTOPT_NEEDSPWD - this protocol needs a password and will use a default
+    one unless one is provided
+
+    PROTOPT_NOURLQUERY - this protocol can't handle a query part on the URL
+    (?foo=bar)
+
+
+  1.5 conncache
+
+  Is a hash table with connections for later re-use. Each SessionHandle has
+  a pointer to its connection cache. Each multi handle sets up a connection
+  cache that all added SessionHandles share by default.
+
+
+  1.6 Curl_share
+  
+  The libcurl share API allocates a Curl_share struct, exposed to the external
+  API as "CURLSH *".
+
+  The idea is that the struct can have a set of own versions of caches and
+  pools and then by providing this struct in the CURLOPT_SHARE option, those
+  specific SessionHandles will use the caches/pools that this share handle
+  holds.
+
+  Then individual SessionHandle structs can be made to share specific things
+  that they otherwise wouldn't, such as cookies.
+
+  The Curl_share struct can currently hold cookies, DNS cache and the SSL
+  session cache.
+
+  
+  1.7 CookieInfo
+
+  This is the main cookie struct. It holds all known cookies and related
+  information. Each SessionHandle has its own private CookieInfo even when
+  they are added to a multi handle. They can be made to share cookies by using
+  the share API.

docs/Makefile.am

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -22,7 +22,8 @@
 
 AUTOMAKE_OPTIONS = foreign no-dependencies
 
-man_MANS = curl.1 curl-config.1 mk-ca-bundle.1
+man_MANS = curl.1 curl-config.1
+noinst_man_MANS = mk-ca-bundle.1
 GENHTMLPAGES = curl.html curl-config.html mk-ca-bundle.html
 PDFPAGES = curl.pdf curl-config.pdf mk-ca-bundle.pdf
 
@@ -36,7 +37,7 @@ EXTRA_DIST = MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS SSLCERTS	 \
  README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS VERSIONS	 \
  KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) HISTORY INSTALL		 \
  $(PDFPAGES) LICENSE-MIXING README.netware DISTRO-DILEMMA INSTALL.devcpp \
- MAIL-ETIQUETTE HTTP-COOKIES
+ MAIL-ETIQUETTE HTTP-COOKIES LIBCURL-STRUCTS
 
 MAN2HTML= roffit < $< >$@
 

docs/SSLCERTS

@@ -1,6 +1,12 @@
                       Peer SSL Certificate Verification
                       =================================
 
+(NOTE: If libcurl was built with Schannel or Secure Transport support, then
+this does not apply to you. Scroll down for details on how the OS-native
+engines handle SSL certificates. If you're not sure, then run "curl -V" and
+read the results. If the version string says "WinSSL" in it, then it was built
+with Schannel support.)
+
 libcurl performs peer SSL certificate verification by default.  This is done
 by using CA cert bundle that the SSL library can use to make sure the peer's
 server certificate is valid.
@@ -93,24 +99,40 @@ server.
                       Peer SSL Certificate Verification with NSS
                       ==========================================
 
-If libcurl is build with NSS support then depending on the OS distribution it
-is probably required to take some additional steps to use the system-wide CA
-cert db. RedHat ships with an additional module libnsspem.so which enables NSS
-to read the OpenSSL PEM CA bundle. With OpenSuSE this lib is missing, and NSS
-can only work with its own internal formats. Also NSS got a new database
-format:
-https://wiki.mozilla.org/NSS_Shared_DB
-Starting with version 7.19.7 libcurl will check for the NSS version it runs,
-and add automatically the 'sql:' prefix to the certdb directory (either the
+If libcurl was built with NSS support, then depending on the OS distribution,
+it is probably required to take some additional steps to use the system-wide CA
+cert db. RedHat ships with an additional module, libnsspem.so, which enables
+NSS to read the OpenSSL PEM CA bundle. This library is missing in OpenSuSE, and
+without it, NSS can only work with its own internal formats. NSS also has a new
+database format: https://wiki.mozilla.org/NSS_Shared_DB
+
+Starting with version 7.19.7, libcurl will check for the NSS version it runs,
+and automatically add the 'sql:' prefix to the certdb directory (either the
 hardcoded default /etc/pki/nssdb or the directory configured with SSL_DIR
-environment variable) if a version 3.12.0 or later is detected.
-To check which certdb format your distribution provides examine the default
-certdb location /etc/pki/nssdb; the new certdb format can be identified by
+environment variable) if version 3.12.0 or later is detected. To check which
+ertdb format your distribution provides, examine the default
+certdb location: /etc/pki/nssdb; the new certdb format can be identified by
 the filenames cert9.db, key4.db, pkcs11.txt; filenames of older versions are
 cert8.db, key3.db, modsec.db.
-Usually these cert databases are empty; but NSS also has built-in CAs which are
-provided through a shared library libnssckbi.so; if you want to use these
-built-in CAs then create a symlink to libnssckbi.so in /etc/pki/nssdb:
+
+Usually these cert databases are empty, but NSS also has built-in CAs which are
+provided through a shared library, libnssckbi.so; if you want to use these
+built-in CAs, then create a symlink to libnssckbi.so in /etc/pki/nssdb:
 ln -s /usr/lib[64]/libnssckbi.so /etc/pki/nssdb/libnssckbi.so
 
+     Peer SSL Certificate Verification with Schannel and Secure Transport
+     ====================================================================
 
+If libcurl was built with Schannel (Microsoft's TLS/SSL engine) or Secure
+Transport (Apple's TLS/SSL engine) support, then libcurl will still perform
+peer certificate verification, but instead of using a CA cert bundle, it will
+use the certificates that are built into the OS. These are the same
+certificates that appear in the Internet Options control panel (under Windows)
+or Keychain Access application (under OS X). Any custom security rules for
+certificates will be honored.
+
+Schannel will run CRL checks on certificates unless peer verification is
+disabled. Secure Transport on iOS will run OCSP checks on certificates unless
+peer verification is disabled. Secure Transport on OS X will run either OCSP
+or CRL checks on certificates if those features are enabled, and this behavior
+can be adjusted in the preferences of Keychain Access.

docs/THANKS

@@ -13,14 +13,15 @@ Adam Tkac
 Adrian Schuur
 Adriano Meirelles
 Ajit Dhumale
+Aki Koskinen
 Akos Pasztory
 Alan Pinstein
-Albert Chin
 Albert Chin-A-Young
 Albert Choy
 Ale Vesely
 Alejandro Alvarez
 Aleksandar Milivojevic
+Aleksey Tulinov
 Alessandro Ghedini
 Alessandro Vesely
 Alex Bligh
@@ -31,6 +32,7 @@ Alex Suykov
 Alex Vinnik
 Alex aka WindEagle
 Alexander Beedie
+Alexander Klauer
 Alexander Kourakos
 Alexander Krasnostavsky
 Alexander Lazic
@@ -46,11 +48,13 @@ Amol Pattekar
 Amr Shahin
 Anatoli Tubman
 Anders Gustafsson
+Anders Havn
 Andi Jahja
 Andre Guibert de Bruet
 Andreas Damm
 Andreas Faerber
 Andreas Farber
+Andreas Malzahn
 Andreas Ntaflos
 Andreas Olsson
 Andreas Rieke
@@ -64,9 +68,11 @@ Andrew Biggs
 Andrew Bushnell
 Andrew Francis
 Andrew Fuller
+Andrew Kurushin
 Andrew Moise
 Andrew Wansink
 Andrew de los Reyes
+Andrii Moiseiev
 Andrés García
 Andy Cedilnik
 Andy Serpa
@@ -89,6 +95,7 @@ Ates Goral
 Augustus Saunders
 Avery Fay
 Axel Tillequin
+Balaji Parasuram
 Balint Szilakszi
 Bart Whiteley
 Bas Mevissen
@@ -100,17 +107,20 @@ Ben Van Hof
 Ben Winslow
 Benbuck Nason
 Benjamin Gerard
+Benjamin Gilbert
 Benjamin Johnson
 Bernard Leak
 Bernhard Reutner-Fischer
 Bertrand Demiddelaer
 Bill Egert
 Bill Hoffman
+Bill Middlecamp
 Bjoern Sikora
 Bjorn Augustsson
 Bjorn Reese
 Björn Stenberg
 Blaise Potard
+Bob Relyea
 Bob Richmond
 Bob Schader
 Bogdan Nicula
@@ -128,8 +138,10 @@ Brian R Duffy
 Brian Ulm
 Brock Noland
 Bruce Mitchener
+Bruno de Carvalho
 Bryan Henderson
 Bryan Kemp
+Byrial Jensen
 Cameron Kaiser
 Camille Moncelier
 Caolan McNamara
@@ -150,13 +162,13 @@ Chris Maltby
 Chris Mumford
 Chris Smowton
 Christian Grothoff
-Christian Hagele
 Christian Hägele
 Christian Krause
 Christian Kurz
 Christian Robottom Reis
 Christian Schmitz
 Christian Vogt
+Christian Weisgerber
 Christophe Demory
 Christophe Legry
 Christopher Conroy
@@ -166,6 +178,7 @@ Christopher Stone
 Ciprian Badescu
 Claes Jakobsson
 Clarence Gardner
+Clemens Gruber
 Clifford Wolf
 Cody Jones
 Colin Hogben
@@ -177,10 +190,10 @@ Craig A West
 Craig Davison
 Craig Markwardt
 Cris Bailiff
-Cristian Rodriguez
 Cristian Rodríguez
 Curt Bogmine
 Cyrill Osterwalder
+Cédric Deltheil
 Dag Ekengren
 Dagobert Michelsen
 Damien Adant
@@ -228,6 +241,7 @@ David Odin
 David Phillips
 David Rosenstrauch
 David Shaw
+David Strauss
 David Tarendash
 David Thiel
 David Wright
@@ -260,6 +274,7 @@ Douglas R. Horner
 Douglas Steinwand
 Dov Murik
 Duane Cathey
+Duncan
 Duncan Mac-Vicar Prett
 Dustin Boswell
 Dylan Ellicott
@@ -268,9 +283,11 @@ Early Ehlinger
 Ebenezer Ikonne
 Edin Kadribasic
 Eduard Bloch
+Edward Rudd
 Edward Sheldrake
 Eelco Dolstra
 Eetu Ojanen
+Eldar Zaitov
 Ellis Pritchard
 Emanuele Bovisio
 Emil Romanus
@@ -284,15 +301,18 @@ Eric Lavigne
 Eric Melville
 Eric Mertens
 Eric Rautman
+Eric S. Raymond
 Eric Thelin
 Eric Vergnaud
 Eric Wong
 Eric Young
 Erick Nuwendam
+Erik Johansson
 Erwan Legrand
 Erwin Authried
 Eugene Kotlyarov
 Evan Jordan
+Evgeny Turnaev
 Eygene Ryabinkin
 Fabian Hiernaux
 Fabian Keil
@@ -313,6 +333,7 @@ Fred Machado
 Fred New
 Fred Noz
 Frederic Lepied
+Fredrik Thulin
 Gabriel Kuri
 Gabriel Sjoberg
 Garrett Holmstrom
@@ -356,6 +377,7 @@ Gwenole Beauchesne
 Götz Babin-Ebell
 Hamish Mackenzie
 Hang Kin Lau
+Hang Su
 Hanno Kranzhoff
 Hans Steegers
 Hans-Jurgen May
@@ -390,6 +412,7 @@ Immanuel Gregoire
 Ingmar Runge
 Ingo Ralf Blum
 Ingo Wilken
+Ishan SinghLevett
 Jack Zhang
 Jacky Lam
 Jacob Meuser
@@ -411,6 +434,7 @@ Jan Koen Annot
 Jan Kunder
 Jan Schaumann
 Jan Van Boghout
+Jared Jennings
 Jared Lundell
 Jari Sundell
 Jason Glasgow
@@ -425,6 +449,7 @@ Jean-Claude Chauve
 Jean-Francois Bertrand
 Jean-Louis Lemaire
 Jean-Marc Ranger
+Jean-Noel Rouvignac
 Jean-Philippe Barrette-LaPierre
 Jeff Connelly
 Jeff Johnson
@@ -434,6 +459,7 @@ Jeff Pohlmeyer
 Jeff Weber
 Jeffrey Pohlmeyer
 Jeremy Friesner
+Jeremy Huddleston
 Jerome Muffat-Meridol
 Jerome Vouillon
 Jerry Wu
@@ -445,6 +471,8 @@ Jim Drash
 Jim Freeman
 Jim Hollinger
 Jim Meyering
+Jiri Hruska
+Jiri Jaburek
 Jocelyn Jaubert
 Joe Halpin
 Joe Malicki
@@ -459,6 +487,7 @@ John Bradshaw
 John Crow
 John Dennis
 John E. Malmberg
+John Gardiner Myers
 John Janssen
 John Joseph Bachir
 John Kelly
@@ -500,8 +529,10 @@ Julien Royer
 Jun-ichiro itojun Hagino
 Jurij Smakov
 Justin Fletcher
+Justin Karneges
 Jörg Mueller-Tolk
 Jörn Hartroth
+Kai Engert
 Kai Sommerfeld
 Kai-Uwe Rommel
 Kalle Vahlman
@@ -527,10 +558,12 @@ Kevin Lussier
 Kevin Reed
 Kevin Roth
 Kim Rinnewitz
+Kim Vandry
 Kimmo Kinnunen
 Kjell Ericson
 Kjetil Jacobsen
 Klevtsov Vadim
+Konstantin Isakov
 Kris Kennaway
 Krishnendu Majumdar
 Krister Johansen
@@ -543,6 +576,7 @@ Larry Fahnoe
 Lars Buitinck
 Lars Gustafsson
 Lars J. Aas
+Lars Johannesen
 Lars Nilsson
 Lars Torben Wilson
 Lau Hang Kin
@@ -559,11 +593,13 @@ Ling Thio
 Linus Nielsen Feltzing
 Lisa Xu
 Liza Alenchery
+Lluís Batlle i Rossell
 Loic Dachary
 Loren Kirkby
 Luca Altea
 Luca Alteas
 Lucas Adamski
+Ludovico Cavedon
 Lukasz Czekierda
 Luke Amery
 Luke Call
@@ -575,6 +611,7 @@ Mandy Wu
 Manfred Schwarb
 Manuel Massing
 Marc Boucher
+Marc Doughty
 Marc Hoersken
 Marc Kleine-Budde
 Marcel Raad
@@ -606,6 +643,7 @@ Martin C. Martin
 Martin Drasar
 Martin Hager
 Martin Hedenfalk
+Martin Jansen
 Martin Lemke
 Martin Skinner
 Martin Storsjo
@@ -616,6 +654,7 @@ Massimo Callegari
 Mateusz Loskot
 Mathias Axelsson
 Mats Lidell
+Matt Arsenault
 Matt Kraai
 Matt Veenstra
 Matt Witherspoon
@@ -652,12 +691,14 @@ Michal Gorny
 Michal Kowalczyk
 Michal Marek
 Michele Bini
+Miguel Angel
 Mihai Ionescu
 Mikael Johansson
 Mikael Sennerholm
 Mike Bytnar
 Mike Crowe
 Mike Dobbs
+Mike Giancola
 Mike Hommey
 Mike Power
 Mike Protts
@@ -667,6 +708,8 @@ Mitz Wark
 Mohamed Lrhazi
 Mohun Biswas
 Moonesamy
+Myk Taylor
+Nach M. S.
 Nathan Coulter
 Nathan O'Sullivan
 Nathanael Nerode
@@ -700,6 +743,7 @@ Ofer
 Olaf Flebbe
 Olaf Stueben
 Olaf Stüben
+Oliver Gondža
 Olivier Berger
 Oren Tirosh
 Ori Avtalion
@@ -711,6 +755,7 @@ Pascal Terjan
 Pasha Kuznetsov
 Pat Ray
 Patrice Guerin
+Patricia Muscalu
 Patrick Bihan-Faou
 Patrick Monnerat
 Patrick Scott
@@ -733,6 +778,7 @@ Pedro Neves
 Pete Su
 Peter Bray
 Peter Forret
+Peter Gal
 Peter Heuchert
 Peter Hjalmarsson
 Peter Korsgaard
@@ -770,6 +816,7 @@ Quinn Slack
 Rafa Muyo
 Rafael Sagula
 Rainer Canavan
+Rainer Jung
 Rainer Koenig
 Rajesh Naganathan
 Ralf S. Engelschall
@@ -784,6 +831,7 @@ Reinout van Schouwen
 Renato Botelho
 Renaud Chaillat
 Renaud Duhaut
+Renaud Guillard
 Rene Bernhardt
 Rene Rebe
 Reuven Wachtfogel
@@ -797,6 +845,7 @@ Richard Bramante
 Richard Clayton
 Richard Cooper
 Richard Gorton
+Richard Michael
 Richard Prescott
 Richard Silverman
 Rick Jones
@@ -813,6 +862,7 @@ Robert Iakobashvili
 Robert Olson
 Robert Schumann
 Robert Weaver
+Robert Wruck
 Robin Cornelius
 Robin Johnson
 Robin Kay
@@ -837,6 +887,7 @@ Ryan Schmidt
 S. Moonesamy
 Salvador Dávila
 Salvatore Sorrentino
+Sam Deane
 Sam Listopad
 Sampo Kellomaki
 Samuel Díaz García
@@ -847,6 +898,7 @@ Sandor Feldi
 Santhana Todatry
 Saqib Ali
 Sara Golemon
+Saran Neti
 Saul good
 Scott Bailey
 Scott Barrett
@@ -876,8 +928,10 @@ Spacen Jasset
 Spiridonoff A.V
 Stadler Stephan
 Stan van de Burgt
+Stanislav Ivochkin
 Stefan Esser
 Stefan Krause
+Stefan Neis
 Stefan Teleman
 Stefan Tomanek
 Stefan Ulrich
@@ -896,6 +950,7 @@ Steve Oliphant
 Steve Roskowski
 Steven Bazyl
 Steven G. Johnson
+Steven Gu
 Steven M. Schweda
 Steven Parkes
 Stoned Elipot
@@ -924,6 +979,7 @@ Tim Harder
 Tim Heckman
 Tim Newsome
 Tim Sneddon
+Timo Sirainen
 Tinus van den Berg
 Tobias Rundström
 Toby Peterson
@@ -933,6 +989,7 @@ Todd Ouska
 Todd Vierling
 Tom Benoist
 Tom Donovan
+Tom Grace
 Tom Lee
 Tom Mattison
 Tom Moers
@@ -958,6 +1015,7 @@ Troels Walsted Hansen
 Troy Engel
 Tupone Alfredo
 Ulf Härnhammar
+Ulrich Doehner
 Ulrich Zadow
 Venkat Akella
 Victor Snezhko
@@ -983,15 +1041,21 @@ Wesley Laxton
 Wesley Miaw
 Wez Furlong
 Wilfredo Sanchez
+Willem Sparreboom
 Wojciech Zwiefka
+Wouter Van Rooy
 Wu Yongzheng
 Xavier Bouchoux
+Yamada Yasuharu
 Yang Tse
 Yarram Sunil
 Yehoshua Hershberg
 Yukihiro Kawada
 Yuriy Sosov
+Yves Arrouye
 Yves Lejeune
+Zdenek Pavlas
+Zekun Ni
 Zmey Petroff
 Zvi Har'El
 nk

docs/TODO

@@ -16,8 +16,8 @@
  1.3 struct lifreq
  1.4 signal-based resolver timeouts
  1.5 get rid of PATH_MAX
- 1.6 progress callback without doubles
- 1.7 Happy Eyeball dual stack connect
+ 1.6 Happy Eyeball dual stack connect
+ 1.7 Modified buffer size approach
 
  2. libcurl - multi interface
  2.1 More non-blocking
@@ -38,6 +38,7 @@
  5.1 Better persistency for HTTP 1.0
  5.2 support FF3 sqlite cookie files
  5.3 Rearrange request header order
+ 5.4 HTTP2/SPDY
 
  6. TELNET
  6.1 ditch stdin
@@ -45,36 +46,40 @@
  6.3 feature negotiation debug data
  6.4 send data in chunks
 
- 7. SSL
- 7.1 Disable specific versions
- 7.2 Provide mutex locking API
- 7.3 Evaluate SSL patches
- 7.4 Cache OpenSSL contexts
- 7.5 Export session ids
- 7.6 Provide callback for cert verification
- 7.7 Support other SSL libraries
- 7.9 improve configure --with-ssl
- 7.10 Support DANE
+ 7. SMTP
+ 7.1 Pipelining
+ 7.2 Graceful base64 decoding failure
+ 7.3 Enhanced capability support
  
- 8. GnuTLS
- 8.1 SSL engine stuff
- 8.3 check connection
+ 8. POP3
+ 8.1 Pipelining
+ 8.2 Graceful base64 decoding failure
+ 8.3 Enhanced capability support
  
- 9. SMTP
- 9.1 Specify the preferred authentication mechanism
- 9.2 Initial response
- 9.3 Pipelining
+ 9. IMAP
+ 9.1 Graceful base64 decoding failure
+ 9.2 Enhanced capability support
  
- 10. POP3
- 10.1 auth= in URLs
+ 10. LDAP
+ 10.1 SASL based authentication mechanisms
  
- 11. LDAP
- 11.1 SASL based authentication mechanisms
+ 11. New protocols
+ 11.1 RSYNC
 
- 12. Other protocols
+ 12. SSL
+ 12.1 Disable specific versions
+ 12.2 Provide mutex locking API
+ 12.3 Evaluate SSL patches
+ 12.4 Cache OpenSSL contexts
+ 12.5 Export session ids
+ 12.6 Provide callback for cert verification
+ 12.7 Support other SSL libraries
+ 12.8 improve configure --with-ssl
+ 12.9 Support DANE
 
- 13. New protocols
- 13.1 RSYNC
+ 13. GnuTLS
+ 13.1 SSL engine stuff
+ 13.2 check connection
 
  14. SASL
  14.1 Other authentication mechanisms
@@ -152,16 +157,7 @@
  we need libssh2 to properly tell us when we pass in a too small buffer and
  its current API (as of libssh2 1.2.7) doesn't.
 
-1.6 progress callback without doubles
-
- The progress callback was introduced way back in the days and the choice to
- use doubles in the arguments was possibly good at the time. Today the doubles
- only confuse users and make the amounts less precise. We should introduce
- another progress callback option that take precedence over the old one and
- have both co-exist for a forseeable time until we can remove the double-using
- one.
-
-1.7 Happy Eyeball dual stack connect
+1.6 Happy Eyeball dual stack connect
 
  In order to make alternative technologies not suffer when transitioning, like
  when introducing IPv6 as an alternative to IPv4 and there are more than one
@@ -173,6 +169,27 @@
 
     http://tools.ietf.org/html/rfc6555
 
+1.7 Modified buffer size approach
+
+ Current libcurl allocates a fixed 16K size buffer for download and an
+ additional 16K for upload. They are always unconditionally part of the easy
+ handle. If CRLF translations are requested, an additional 32K "scratch
+ buffer" is allocated. A total of 64K transfer buffers in the worst case.
+
+ First, while the handles are not actually in use these buffers could be freed
+ so that lingering handles just kept in queues or whatever waste less memory.
+
+ Secondly, SFTP is a protocol that needs to handle many ~30K blocks at once
+ since each need to be individually acked and therefore libssh2 must be
+ allowed to send (or receive) many separate ones in parallel to achieve high
+ transfer speeds. A current libcurl build with a 16K buffer makes that
+ impossible, but one with a 512K buffer will reach MUCH faster transfers. But
+ allocating 512K unconditionally for all buffers just in case they would like
+ to do fast SFTP transfers at some point is not a good solution either.
+
+ Dynamically allocate buffer size depending on protocol in use in combination
+ with freeing it after each individual transfer? Other suggestions?
+
 
 2. libcurl - multi interface
 
@@ -265,6 +282,24 @@
  headers use a default value so only headers that need to be moved have to be
  specified.
 
+5.4 HTTP2/SPDY
+
+ The first drafts for HTTP2 have been published
+ (http://tools.ietf.org/html/draft-ietf-httpbis-http2-03) and is so far based
+ on SPDY (http://www.chromium.org/spdy) designs and experiences. Chances are
+ it will end up in that style. Chrome and Firefox already support SPDY and
+ lots of web services do.
+
+ It would make sense to implement SPDY support now and later transition into
+ or add HTTP2 support as well.
+
+ We should base or HTTP2/SPDY work on a 3rd party library for the protocol
+ fiddling. The Spindy library (http://spindly.haxx.se/) was an attempt to make
+ such a library with an API suitable for use by libcurl but that effort has
+ more or less stalled.  spdylay (https://github.com/tatsuhiro-t/spdylay) may
+ be a better option, either used directly or wrapped with a more spindly-like
+ API.
+
 
 6. TELNET
 
@@ -290,25 +325,92 @@ to provide the data to send.
   use, but inefficient for any other.  Sent data should be sent in larger
   chunks.
 
-7. SSL
+7. SMTP
 
-7.1 Disable specific versions
+7.1 Pipelining
+
+ Add support for pipelining emails.
+
+7.2 Graceful base64 decoding failure
+
+ Rather than shutting down the session and returning an error when the
+ decoding of a base64 encoded authentication response fails, we should
+ gracefully shutdown the authentication process by sending a * response to the
+ server as per RFC4954.
+
+7.3 Enhanced capability support
+
+ Add the ability, for an application that uses libcurl, to obtain the list of
+ capabilities returned from the EHLO command.
+
+8. POP3
+
+8.1 Pipelining
+
+ Add support for pipelining commands.
+
+8.2 Graceful base64 decoding failure
+
+ Rather than shutting down the session and returning an error when the
+ decoding of a base64 encoded authentication response fails, we should
+ gracefully shutdown the authentication process by sending a * response to the
+ server as per RFC5034.
+ 
+8.3 Enhanced capability support
+
+ Add the ability, for an application that uses libcurl, to obtain the list of
+ capabilities returned from the CAPA command.
+
+9. IMAP
+
+9.1 Graceful base64 decoding failure
+
+ Rather than shutting down the session and returning an error when the
+ decoding of a base64 encoded authentication response fails, we should
+ gracefully shutdown the authentication process by sending a * response to the
+ server as per RFC3501.
+
+9.2 Enhanced capability support
+
+ Add the ability, for an application that uses libcurl, to obtain the list of
+ capabilities returned from the CAPABILITY command.
+
+10. LDAP
+
+10.1 SASL based authentication mechanisms
+
+ Currently the LDAP module only supports ldap_simple_bind_s() in order to bind
+ to an LDAP server. However, this function sends username and password details
+ using the simple authentication mechanism (as clear text). However, it should
+ be possible to use ldap_bind_s() instead specifing the security context
+ information ourselves.
+
+11. New protocols
+
+11.1 RSYNC
+
+ There's no RFC for the protocol or an URI/URL format.  An implementation
+ should most probably use an existing rsync library, such as librsync.
+
+12. SSL
+
+12.1 Disable specific versions
 
  Provide an option that allows for disabling specific SSL versions, such as
  SSLv2 http://curl.haxx.se/bug/feature.cgi?id=1767276
 
-7.2 Provide mutex locking API
+12.2 Provide mutex locking API
 
  Provide a libcurl API for setting mutex callbacks in the underlying SSL
  library, so that the same application code can use mutex-locking
  independently of OpenSSL or GnutTLS being used.
 
-7.3 Evaluate SSL patches
+12.3 Evaluate SSL patches
 
  Evaluate/apply Gertjan van Wingerde's SSL patches:
  http://curl.haxx.se/mail/lib-2004-03/0087.html
 
-7.4 Cache OpenSSL contexts
+12.4 Cache OpenSSL contexts
 
  "Look at SSL cafile - quick traces look to me like these are done on every
  request as well, when they should only be necessary once per ssl context (or
@@ -318,7 +420,7 @@ to provide the data to send.
  style connections are re-used. It will make us use slightly more memory but
  it will libcurl do less creations and deletions of SSL contexts.
 
-7.5 Export session ids
+12.5 Export session ids
 
  Add an interface to libcurl that enables "session IDs" to get
  exported/imported. Cris Bailiff said: "OpenSSL has functions which can
@@ -326,93 +428,50 @@ to provide the data to send.
  the state from such a buffer at a later date - this is used by mod_ssl for
  apache to implement and SSL session ID cache".
 
-7.6 Provide callback for cert verification
+12.6 Provide callback for cert verification
 
  OpenSSL supports a callback for customised verification of the peer
  certificate, but this doesn't seem to be exposed in the libcurl APIs. Could
  it be? There's so much that could be done if it were!
 
-7.7 Support other SSL libraries
+12.7 Support other SSL libraries
 
  Make curl's SSL layer capable of using other free SSL libraries.  Such as
  MatrixSSL (http://www.matrixssl.org/).
 
-7.9 improve configure --with-ssl
+12.8 improve configure --with-ssl
 
  make the configure --with-ssl option first check for OpenSSL, then GnuTLS,
  then NSS...
 
-7.10 Support DANE
+12.9 Support DANE
 
  DNS-Based Authentication of Named Entities (DANE) is a way to provide SSL
  keys and certs over DNS using DNSSEC as an alternative to the CA model.
  http://www.rfc-editor.org/rfc/rfc6698.txt
 
+ An initial patch was posted by Suresh Krishnaswamy on March 7th 2013
+ (http://curl.haxx.se/mail/lib-2013-03/0075.html) but it was a too simple
+ approach. See Daniel's comments:
+ http://curl.haxx.se/mail/lib-2013-03/0103.html . libunbound may be the
+ correct library to base this development on.
 
-8. GnuTLS
+13. GnuTLS
 
-8.1 SSL engine stuff
+13.1 SSL engine stuff
 
  Is this even possible?
 
-8.3 check connection
+13.2 check connection
 
  Add a way to check if the connection seems to be alive, to correspond to the
  SSL_peak() way we use with OpenSSL.
 
-
-9. SMTP
-
-9.1 Specify the preferred authentication mechanism
-
- Add the ability to specify the preferred authentication mechanism or a list
- of mechanisms that should be used. Not only that, but the order that is
- returned by the server during the EHLO response should be honored by curl.
-
-9.2 Initial response
-
- Add the ability for the user to specify whether the initial response is
- included in the AUTH command. Some email servers, such as Microsoft
- Exchange, can work with either whilst others need to have the initial
- response sent separately:
-
- http://curl.haxx.se/mail/lib-2012-03/0114.html
-
-9.3 Pipelining
-
- Add support for pipelining emails.
-
-10. POP3
-
-10.1 auth= in URLs
-
- Being able to specify the preferred authentication mechanism in the URL as
- per RFC2384.
-
-11. LDAP
-
-11.1 SASL based authentication mechanisms
-
- Currently the LDAP module only supports ldap_simple_bind_s() in order to bind
- to an LDAP server. However, this function sends username and password details
- using the simple authentication mechanism (as clear text). However, it should
- be possible to use ldap_bind_s() instead specifing the security context
- information ourselves.
-
-12. Other protocols
-
-13. New protocols
-
-13.1 RSYNC
-
- There's no RFC for the protocol or an URI/URL format.  An implementation
- should most probably use an existing rsync library, such as librsync.
-
 14. SASL
 
 14.1 Other authentication mechanisms
 
- Add support for gssapi to SMTP, POP3 and IMAP.
+ Add support for GSSAPI to SMTP, POP3 and IMAP.
 
 15. Client
 

docs/curl.1

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -230,7 +230,9 @@ server sends an unsupported encoding, curl will report an error.
 .IP "--connect-timeout <seconds>"
 Maximum time in seconds that you allow the connection to the server to take.
 This only limits the connection phase, once curl has connected this option is
-of no more use. See also the \fI-m, --max-time\fP option.
+of no more use.  Since 7.32.0, this option accepts decimal values, but the
+actual timeout will decrease in accuracy as the specified timeout increases in
+decimal precision. See also the \fI-m, --max-time\fP option.
 
 If this option is used several times, the last one will be used.
 .IP "--create-dirs"
@@ -388,7 +390,15 @@ curl the nickname of the certificate to use within the NSS database defined
 by the environment variable SSL_DIR (or by default /etc/pki/nssdb). If the
 NSS PEM PKCS#11 module (libnsspem.so) is available then PEM files may be
 loaded. If you want to use a file from the current directory, please precede
-it with "./" prefix, in order to avoid confusion with a nickname.
+it with "./" prefix, in order to avoid confusion with a nickname.  If the
+nickname contains ":", it needs to be preceded by "\\" so that it is not
+recognized as password delimiter.  If the nickname contains "\\", it needs to
+be escaped as "\\\\" so that it is not recognized as an escape character.
+
+(iOS and Mac OS X only) If curl is built against Secure Transport, then the
+certificate string must match the name of a certificate that's in the system or
+user keychain. The private key corresponding to the certificate, and
+certificate chain (if any),  must also be present in the keychain.
 
 If this option is used several times, the last one will be used.
 .IP "--engine <name>"
@@ -805,7 +815,10 @@ Basic authentication).
 .IP "-m, --max-time <seconds>"
 Maximum time in seconds that you allow the whole operation to take.  This is
 useful for preventing your batch jobs from hanging for hours due to slow
-networks or links going down.  See also the \fI--connect-timeout\fP option.
+networks or links going down.  Since 7.32.0, this option accepts decimal
+values, but the actual timeout will decrease in accuracy as the specified
+timeout increases in decimal precision.  See also the \fI--connect-timeout\fP
+option.
 
 If this option is used several times, the last one will be used.
 .IP "--mail-auth <address>"
@@ -1038,6 +1051,13 @@ ubiquitous in web browsers, so curl does the conversion by default to maintain
 consistency. However, a server may require a POST to remain a POST after such
 a redirection. This option is meaningful only when using \fI-L, --location\fP
 (Added in 7.19.1)
+.IP "--post303"
+(HTTP) Tells curl to respect RFC 2616/10.3.2 and not convert POST requests
+into GET requests when following a 303 redirection. The non-RFC behaviour is
+ubiquitous in web browsers, so curl does the conversion by default to maintain
+consistency. However, a server may require a POST to remain a POST after such
+a redirection. This option is meaningful only when using \fI-L, --location\fP
+(Added in 7.26.0)
 .IP "--proto <protocols>"
 Tells curl to use the listed protocols for its initial retrieval. Protocols
 are evaluated left to right, are comma separated, and are each a protocol
@@ -1272,8 +1292,12 @@ Set this option to zero to not timeout retries. (Added in 7.12.3)
 
 If this option is used several times, the last one will be used.
 .IP "-s, --silent"
-Silent or quiet mode. Don't show progress meter or error messages.  Makes
-Curl mute.
+Silent or quiet mode. Don't show progress meter or error messages.  Makes Curl
+mute. It will still output the data you ask for, potentially even to the
+terminal/stdout unless you redirect it.
+.IP "--sasl-ir"
+Enable initial response in SASL authentication.
+(Added in 7.31.0)
 .IP "-S, --show-error"
 When used with \fI-s\fP it makes curl show an error message if it fails.
 .IP "--ssl"
@@ -1669,7 +1693,7 @@ If this option is used several times, the last one will be used.
 
 .IP "--xattr"
 When saving output to a file, this option tells curl to store certain file
-metadata in extened file attributes. Currently, the URL is stored in the
+metadata in extended file attributes. Currently, the URL is stored in the
 xdg.origin.url attribute and, for HTTP, the content type is stored in
 the mime_type attribute. If the file system does not support extended
 attributes, a warning is issued.
@@ -1689,7 +1713,7 @@ speed-time seconds it gets aborted. speed-time is set with \fI-y\fP and is 30
 if not set.
 
 If this option is used several times, the last one will be used.
-.IP "-z/--time-cond <date expression>|<file>"
+.IP "-z, --time-cond <date expression>|<file>"
 (HTTP/FTP) Request a file that has been modified later than the given time and
 date, or one that has been modified before that time. The <date expression>
 can be all sorts of date strings or if it doesn't match any internal ones, it

docs/examples/.gitignore

@@ -43,3 +43,5 @@ simplessl
 smtp-multi
 smtp-tls
 url2file
+usercertinmem
+xmlstream

docs/examples/Makefile.am

@@ -43,7 +43,6 @@ LIBDIR = $(top_builddir)/lib
 # Avoid libcurl obsolete stuff
 AM_CPPFLAGS += -DCURL_NO_OLDIES
 
-# Mostly for Windows build targets, when using static libcurl
 if USE_CPPFLAG_CURL_STATICLIB
 AM_CPPFLAGS += -DCURL_STATICLIB
 endif

docs/examples/Makefile.inc

@@ -12,4 +12,5 @@ check_PROGRAMS = 10-at-a-time anyauthput cookie_interface debug fileupload \
 COMPLICATED_EXAMPLES = curlgtk.c curlx.c htmltitle.cpp cacertinmem.c	   \
   ftpuploadresume.c ghiper.c hiperfifo.c htmltidy.c multithread.c	   \
   opensslthreadlock.c sampleconv.c synctime.c threaded-ssl.c evhiperfifo.c \
-  smooth-gtk-thread.c version-check.pl href_extractor.c asiohiper.cpp
+  smooth-gtk-thread.c version-check.pl href_extractor.c asiohiper.cpp \
+  multi-uv.c xmlstream.c usercertinmem.c

docs/examples/Makefile.m32

@@ -27,18 +27,18 @@
 ## Example: mingw32-make -f Makefile.m32 CFG=-zlib-ssl-spi-winidn
 ##
 ## Hint: you can also set environment vars to control the build, f.e.:
-## set ZLIB_PATH=c:/zlib-1.2.7
+## set ZLIB_PATH=c:/zlib-1.2.8
 ## set ZLIB=1
 #
 ###########################################################################
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../../zlib-1.2.7
+ZLIB_PATH = ../../../zlib-1.2.8
 endif
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../../openssl-0.9.8x
+OPENSSL_PATH = ../../../openssl-0.9.8y
 endif
 # Edit the path below to point to the base of your LibSSH2 package.
 ifndef LIBSSH2_PATH

docs/examples/Makefile.netware

@@ -14,12 +14,12 @@ endif
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../../zlib-1.2.7
+ZLIB_PATH = ../../../zlib-1.2.8
 endif
 
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../../openssl-0.9.8x
+OPENSSL_PATH = ../../../openssl-0.9.8y
 endif
 
 # Edit the path below to point to the base of your LibSSH2 package.

docs/examples/README

@@ -61,6 +61,7 @@ multi-debugcallback.c - a multi-interface app using the debug callback
 multi-double.c - a multi-interface app doing two simultaneous transfers
 multi-post.c   - a multi-interface app doing a multipart formpost
 multi-single.c - a multi-interface app getting a single file
+multi-uv.c     - a multi-interface app using libuv
 multithread.c  - an example using multi-treading transferring multiple files
 opensslthreadlock.c - show how to do locking when using OpenSSL multi-threaded
 persistant.c   - request two URLs with a persistent connection
@@ -77,4 +78,5 @@ simplepost.c   - HTTP POST
 simplessl.c    - HTTPS example with certificates many options set
 synctime.c     - Sync local time by extracting date from remote HTTP servers
 url2file.c     - download a document and store it in a file
+xmlstream.c    - Stream-parse a document using the streaming Expat parser
 10-at-a-time.c - Download many files simultaneously, 10 at a time.

docs/examples/chkspeed.c

@@ -60,7 +60,7 @@ int main(int argc, char *argv[])
 {
   CURL *curl_handle;
   CURLcode res;
-  int prtsep = 0, prttime = 0;
+  int prtall = 0, prtsep = 0, prttime = 0;
   const char *url = URL_1M;
   char *appname = argv[0];
 
@@ -77,6 +77,8 @@ int main(int argc, char *argv[])
           fprintf(stderr, "\r%s %s - %s\n",
                   appname, CHKSPEED_VERSION, curl_version());
           exit(1);
+        } else if (strncasecmp(*argv, "-A", 2) == 0) {
+          prtall = 1;
         } else if (strncasecmp(*argv, "-X", 2) == 0) {
           prtsep = 1;
         } else if (strncasecmp(*argv, "-T", 2) == 0) {
@@ -161,6 +163,18 @@ int main(int argc, char *argv[])
     if((CURLE_OK == res) && (val>0))
       printf("Average download speed: %0.3f kbyte/sec.\n", val / 1024);
 
+    if (prtall) {
+      /* check for name resolution time */
+      res = curl_easy_getinfo(curl_handle, CURLINFO_NAMELOOKUP_TIME, &val);
+      if((CURLE_OK == res) && (val>0))
+        printf("Name lookup time: %0.3f sec.\n", val);
+
+      /* check for connect time */
+      res = curl_easy_getinfo(curl_handle, CURLINFO_CONNECT_TIME, &val);
+      if((CURLE_OK == res) && (val>0))
+        printf("Connect time: %0.3f sec.\n", val);
+    }
+
   } else {
     fprintf(stderr, "Error while fetching '%s' : %s\n",
             url, curl_easy_strerror(res));

docs/examples/getinmemory.c

@@ -42,10 +42,10 @@ WriteMemoryCallback(void *contents, size_t size, size_t nmemb, void *userp)
   struct MemoryStruct *mem = (struct MemoryStruct *)userp;
 
   mem->memory = realloc(mem->memory, mem->size + realsize + 1);
-  if (mem->memory == NULL) {
+  if(mem->memory == NULL) {
     /* out of memory! */
     printf("not enough memory (realloc returned NULL)\n");
-    exit(EXIT_FAILURE);
+    return 0;
   }
 
   memcpy(&(mem->memory[mem->size]), contents, realsize);
@@ -59,6 +59,7 @@ WriteMemoryCallback(void *contents, size_t size, size_t nmemb, void *userp)
 int main(void)
 {
   CURL *curl_handle;
+  CURLcode res;
 
   struct MemoryStruct chunk;
 
@@ -84,11 +85,14 @@ int main(void)
   curl_easy_setopt(curl_handle, CURLOPT_USERAGENT, "libcurl-agent/1.0");
 
   /* get it! */
-  curl_easy_perform(curl_handle);
-
-  /* cleanup curl stuff */
-  curl_easy_cleanup(curl_handle);
+  res = curl_easy_perform(curl_handle);
 
+  /* check for errors */
+  if(res != CURLE_OK) {
+    fprintf(stderr, "curl_easy_perform() failed: %s\n",
+            curl_easy_strerror(res));
+  }
+  else {
     /*
      * Now, our chunk.memory points to a memory block that is chunk.size
      * bytes big and contains the remote file.
@@ -101,6 +105,10 @@ int main(void)
      */
 
     printf("%lu bytes retrieved\n", (long)chunk.size);
+  }
+
+  /* cleanup curl stuff */
+  curl_easy_cleanup(curl_handle);
 
   if(chunk.memory)
     free(chunk.memory);

docs/examples/hiperfifo.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -24,7 +24,7 @@
 
 Written by Jeff Pohlmeyer
 
-Requires libevent and a (POSIX?) system that has mkfifo().
+Requires libevent version 2 and a (POSIX?) system that has mkfifo().
 
 This is an adaptation of libcurl's "hipev.c" and libevent's "event-test.c"
 sample programs.
@@ -61,7 +61,7 @@ callback.
 #include <unistd.h>
 #include <sys/poll.h>
 #include <curl/curl.h>
-#include <event.h>
+#include <event2/event.h>
 #include <fcntl.h>
 #include <sys/stat.h>
 #include <errno.h>
@@ -71,9 +71,11 @@ callback.
 
 
 /* Global information, common to all connections */
-typedef struct _GlobalInfo {
-  struct event fifo_event;
-  struct event timer_event;
+typedef struct _GlobalInfo
+{
+  struct event_base *evbase;
+  struct event *fifo_event;
+  struct event *timer_event;
   CURLM *multi;
   int still_running;
   FILE* input;
@@ -81,7 +83,8 @@ typedef struct _GlobalInfo {
 
 
 /* Information associated with a specific easy handle */
-typedef struct _ConnInfo {
+typedef struct _ConnInfo
+{
   CURL *easy;
   char *url;
   GlobalInfo *global;
@@ -90,12 +93,13 @@ typedef struct _ConnInfo {
 
 
 /* Information associated with a specific socket */
-typedef struct _SockInfo {
+typedef struct _SockInfo
+{
   curl_socket_t sockfd;
   CURL *easy;
   int action;
   long timeout;
-  struct event ev;
+  struct event *ev;
   int evset;
   GlobalInfo *global;
 } SockInfo;
@@ -111,7 +115,7 @@ static int multi_timer_cb(CURLM *multi, long timeout_ms, GlobalInfo *g)
   timeout.tv_sec = timeout_ms/1000;
   timeout.tv_usec = (timeout_ms%1000)*1000;
   fprintf(MSG_OUT, "multi_timer_cb: Setting timeout to %ld ms\n", timeout_ms);
-  evtimer_add(&g->timer_event, &timeout);
+  evtimer_add(g->timer_event, &timeout);
   return 0;
 }
 
@@ -186,8 +190,8 @@ static void event_cb(int fd, short kind, void *userp)
   check_multi_info(g);
   if ( g->still_running <= 0 ) {
     fprintf(MSG_OUT, "last transfer done, kill timeout\n");
-    if (evtimer_pending(&g->timer_event, NULL)) {
-      evtimer_del(&g->timer_event);
+    if (evtimer_pending(g->timer_event, NULL)) {
+      evtimer_del(g->timer_event);
     }
   }
 }
@@ -215,7 +219,7 @@ static void remsock(SockInfo *f)
 {
   if (f) {
     if (f->evset)
-      event_del(&f->ev);
+      event_free(f->ev);
     free(f);
   }
 }
@@ -232,16 +236,17 @@ static void setsock(SockInfo*f, curl_socket_t s, CURL*e, int act, GlobalInfo*g)
   f->action = act;
   f->easy = e;
   if (f->evset)
-    event_del(&f->ev);
-  event_set(&f->ev, f->sockfd, kind, event_cb, g);
-  f->evset=1;
-  event_add(&f->ev, NULL);
+    event_free(f->ev);
+  f->ev = event_new(g->evbase, f->sockfd, kind, event_cb, g);
+  f->evset = 1;
+  event_add(f->ev, NULL);
 }
 
 
 
 /* Initialize a new SockInfo structure */
-static void addsock(curl_socket_t s, CURL *easy, int action, GlobalInfo *g) {
+static void addsock(curl_socket_t s, CURL *easy, int action, GlobalInfo *g)
+{
   SockInfo *fdp = calloc(sizeof(SockInfo), 1);
 
   fdp->global = g;
@@ -359,10 +364,10 @@ static void fifo_cb(int fd, short event, void *arg)
 }
 
 /* Create a named pipe and tell libevent to monitor it */
+static const char *fifo = "hiper.fifo";
 static int init_fifo (GlobalInfo *g)
 {
   struct stat st;
-  static const char *fifo = "hiper.fifo";
   curl_socket_t sockfd;
 
   fprintf(MSG_OUT, "Creating named pipe \"%s\"\n", fifo);
@@ -386,11 +391,18 @@ static int init_fifo (GlobalInfo *g)
   g->input = fdopen(sockfd, "r");
 
   fprintf(MSG_OUT, "Now, pipe some URL's into > %s\n", fifo);
-  event_set(&g->fifo_event, sockfd, EV_READ | EV_PERSIST, fifo_cb, g);
-  event_add(&g->fifo_event, NULL);
+  g->fifo_event = event_new(g->evbase, sockfd, EV_READ|EV_PERSIST, fifo_cb, g);
+  event_add(g->fifo_event, NULL);
   return (0);
 }
 
+static void clean_fifo(GlobalInfo *g)
+{
+    event_free(g->fifo_event);
+    fclose(g->input);
+    unlink(fifo);
+}
+
 int main(int argc, char **argv)
 {
   GlobalInfo g;
@@ -398,10 +410,10 @@ int main(int argc, char **argv)
   (void)argv;
 
   memset(&g, 0, sizeof(GlobalInfo));
-  event_init();
+  g.evbase = event_base_new();
   init_fifo(&g);
   g.multi = curl_multi_init();
-  evtimer_set(&g.timer_event, timer_cb, &g);
+  g.timer_event = evtimer_new(g.evbase, timer_cb, &g);
 
   /* setup the generic multi interface options we want */
   curl_multi_setopt(g.multi, CURLMOPT_SOCKETFUNCTION, sock_cb);
@@ -412,7 +424,13 @@ int main(int argc, char **argv)
   /* we don't call any curl_multi_socket*() function yet as we have no handles
      added! */
 
-  event_dispatch();
+  event_base_dispatch(g.evbase);
+
+  /* this, of course, won't get called since only way to stop this program is
+     via ctrl-C, but it is here to show how cleanup /would/ be done. */
+  clean_fifo(&g);
+  event_free(g.timer_event);
+  event_base_free(g.evbase);
   curl_multi_cleanup(g.multi);
   return 0;
 }

docs/examples/htmltitle.cpp

@@ -25,7 +25,7 @@
 //
 // GNU C++ compile command line suggestion (edit paths accordingly):
 //
-// g++ -Wall -I/opt/curl/include -I/opt/libxml/include/libxml2 htmltitle.cc \
+// g++ -Wall -I/opt/curl/include -I/opt/libxml/include/libxml2 htmltitle.cpp \
 // -o htmltitle -L/opt/curl/lib -L/opt/libxml/lib -lcurl -lxml2
 
 #include <stdio.h>

docs/examples/multi-single.c

@@ -41,6 +41,8 @@ int main(void)
 
   int still_running; /* keep number of running handles */
 
+  curl_global_init(CURL_GLOBAL_DEFAULT);
+
   http_handle = curl_easy_init();
 
   /* set the options (I left out a few, you'll get the point anyway) */
@@ -108,9 +110,13 @@ int main(void)
     }
   } while(still_running);
 
-  curl_multi_cleanup(multi_handle);
+  curl_multi_remove_handle(multi_handle, http_handle);
 
   curl_easy_cleanup(http_handle);
 
+  curl_multi_cleanup(multi_handle);
+
+  curl_global_cleanup();
+
   return 0;
 }

docs/examples/multi-uv.c

@@ -0,0 +1,212 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+/* Example application code using the multi socket interface to download
+   multiple files at once, but instead of using curl_multi_perform and
+   curl_multi_wait, which uses select(), we use libuv.
+   It supports epoll, kqueue, etc. on unixes and fast IO completion ports on
+   Windows, which means, it should be very fast on all platforms..
+
+   Written by Clemens Gruber, based on an outdated example from uvbook and
+   some tests from libuv.
+
+   Requires libuv and (of course) libcurl.
+
+   See http://nikhilm.github.com/uvbook/ for more information on libuv.
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <uv.h>
+#include <curl/curl.h>
+
+uv_loop_t *loop;
+CURLM *curl_handle;
+uv_timer_t timeout;
+
+typedef struct curl_context_s {
+  uv_poll_t poll_handle;
+  curl_socket_t sockfd;
+} curl_context_t;
+
+curl_context_t* create_curl_context(curl_socket_t sockfd)
+{
+  curl_context_t *context;
+
+  context = (curl_context_t *) malloc(sizeof *context);
+
+  context->sockfd = sockfd;
+
+  uv_poll_init_socket(loop, &context->poll_handle, sockfd);
+  context->poll_handle.data = context;
+
+  return context;
+}
+
+void curl_close_cb(uv_handle_t *handle)
+{
+  curl_context_t* context = (curl_context_t*) handle->data;
+  free(context);
+}
+
+void destroy_curl_context(curl_context_t *context)
+{
+  uv_close((uv_handle_t*) &context->poll_handle, curl_close_cb);
+}
+
+
+void add_download(const char *url, int num)
+{
+  char filename[50];
+  FILE *file;
+  CURL *handle;
+
+  sprintf(filename, "%d.download", num);
+
+  file = fopen(filename, "w");
+  if (file == NULL) {
+    fprintf(stderr, "Error opening %s\n", filename);
+    return;
+  }
+
+  handle = curl_easy_init();
+  curl_easy_setopt(handle, CURLOPT_WRITEDATA, file);
+  curl_easy_setopt(handle, CURLOPT_URL, url);
+  curl_multi_add_handle(curl_handle, handle);
+  fprintf(stderr, "Added download %s -> %s\n", url, filename);
+}
+
+void curl_perform(uv_poll_t *req, int status, int events)
+{
+  int running_handles;
+  int flags = 0;
+  curl_context_t *context;
+  char *done_url;
+  CURLMsg *message;
+  int pending;
+
+  uv_timer_stop(&timeout);
+
+  if (events & UV_READABLE)
+    flags |= CURL_CSELECT_IN;
+  if (events & UV_WRITABLE)
+    flags |= CURL_CSELECT_OUT;
+
+  context = (curl_context_t*)req;
+
+  curl_multi_socket_action(curl_handle, context->sockfd, flags,
+                           &running_handles);
+
+  while ((message = curl_multi_info_read(curl_handle, &pending))) {
+    switch (message->msg) {
+    case CURLMSG_DONE:
+      curl_easy_getinfo(message->easy_handle, CURLINFO_EFFECTIVE_URL,
+                        &done_url);
+      printf("%s DONE\n", done_url);
+
+      curl_multi_remove_handle(curl_handle, message->easy_handle);
+      curl_easy_cleanup(message->easy_handle);
+
+      break;
+    default:
+      fprintf(stderr, "CURLMSG default\n");
+      abort();
+    }
+  }
+}
+
+void on_timeout(uv_timer_t *req, int status)
+{
+  int running_handles;
+  curl_multi_socket_action(curl_handle, CURL_SOCKET_TIMEOUT, 0,
+                           &running_handles);
+}
+
+void start_timeout(CURLM *multi, long timeout_ms, void *userp)
+{
+  if (timeout_ms <= 0)
+    timeout_ms = 1; /* 0 means directly call socket_action, but we'll do it in
+                       a bit */
+  uv_timer_start(&timeout, on_timeout, timeout_ms, 0);
+}
+
+int handle_socket(CURL *easy, curl_socket_t s, int action, void *userp,
+                  void *socketp)
+{
+  curl_context_t *curl_context;
+  if (action == CURL_POLL_IN || action == CURL_POLL_OUT) {
+    if (socketp) {
+      curl_context = (curl_context_t*) socketp;
+    }
+    else {
+      curl_context = create_curl_context(s);
+    }
+    curl_multi_assign(curl_handle, s, (void *) curl_context);
+  }
+
+  switch (action) {
+  case CURL_POLL_IN:
+    uv_poll_start(&curl_context->poll_handle, UV_READABLE, curl_perform);
+    break;
+  case CURL_POLL_OUT:
+    uv_poll_start(&curl_context->poll_handle, UV_WRITABLE, curl_perform);
+    break;
+  case CURL_POLL_REMOVE:
+    if (socketp) {
+      uv_poll_stop(&((curl_context_t*)socketp)->poll_handle);
+      destroy_curl_context((curl_context_t*) socketp);
+      curl_multi_assign(curl_handle, s, NULL);
+    }
+    break;
+  default:
+    abort();
+  }
+
+  return 0;
+}
+
+int main(int argc, char **argv)
+{
+  loop = uv_default_loop();
+
+  if (argc <= 1)
+    return 0;
+
+  if (curl_global_init(CURL_GLOBAL_ALL)) {
+    fprintf(stderr, "Could not init cURL\n");
+    return 1;
+  }
+
+  uv_timer_init(loop, &timeout);
+
+  curl_handle = curl_multi_init();
+  curl_multi_setopt(curl_handle, CURLMOPT_SOCKETFUNCTION, handle_socket);
+  curl_multi_setopt(curl_handle, CURLMOPT_TIMERFUNCTION, start_timeout);
+
+  while (argc-- > 1) {
+    add_download(argv[argc], argc);
+  }
+
+  uv_run(loop, UV_RUN_DEFAULT);
+  curl_multi_cleanup(curl_handle);
+  return 0;
+}

docs/examples/progressfunc.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -30,9 +30,10 @@ struct myprogress {
   CURL *curl;
 };
 
-static int progress(void *p,
-                    double dltotal, double dlnow,
-                    double ultotal, double ulnow)
+/* this is how the CURLOPT_XFERINFOFUNCTION callback works */
+static int xferinfo(void *p,
+                    curl_off_t dltotal, curl_off_t dlnow,
+                    curl_off_t ultotal, curl_off_t ulnow)
 {
   struct myprogress *myp = (struct myprogress *)p;
   CURL *curl = myp->curl;
@@ -48,7 +49,9 @@ static int progress(void *p,
     fprintf(stderr, "TOTAL TIME: %f \r\n", curtime);
   }
 
-  fprintf(stderr, "UP: %g of %g  DOWN: %g of %g\r\n",
+  fprintf(stderr, "UP: %" CURL_FORMAT_CURL_OFF_T " of %" CURL_FORMAT_CURL_OFF_T
+          "  DOWN: %" CURL_FORMAT_CURL_OFF_T " of %" CURL_FORMAT_CURL_OFF_T
+          "\r\n",
           ulnow, ultotal, dlnow, dltotal);
 
   if(dlnow > STOP_DOWNLOAD_AFTER_THIS_MANY_BYTES)
@@ -56,6 +59,19 @@ static int progress(void *p,
   return 0;
 }
 
+/* for libcurl older than 7.32.0 (CURLOPT_PROGRESSFUNCTION) */
+static int older_progress(void *p,
+                          double dltotal, double dlnow,
+                          double ultotal, double ulnow)
+{
+  return xferinfo(p,
+                  (curl_off_t)dltotal,
+                  (curl_off_t)dlnow,
+                  (curl_off_t)ultotal,
+                  (curl_off_t)ulnow);
+}
+
+
 int main(void)
 {
   CURL *curl;
@@ -68,9 +84,28 @@ int main(void)
     prog.curl = curl;
 
     curl_easy_setopt(curl, CURLOPT_URL, "http://example.com/");
-    curl_easy_setopt(curl, CURLOPT_PROGRESSFUNCTION, progress);
+
+    curl_easy_setopt(curl, CURLOPT_PROGRESSFUNCTION, older_progress);
     /* pass the struct pointer into the progress function */
     curl_easy_setopt(curl, CURLOPT_PROGRESSDATA, &prog);
+
+#if LIBCURL_VERSION_NUM >= 0x072000
+    /* xferinfo was introduced in 7.32.0, no earlier libcurl versions will
+       compile as they won't have the symbols around.
+
+       If built with a newer libcurl, but running with an older libcurl:
+       curl_easy_setopt() will fail in run-time trying to set the new
+       callback, making the older callback get used.
+
+       New libcurls will prefer the new callback and instead use that one even
+       if both callbacks are set. */
+
+    curl_easy_setopt(curl, CURLOPT_XFERINFOFUNCTION, xferinfo);
+    /* pass the struct pointer into the xferinfo function, note that this is
+       an alias to CURLOPT_PROGRESSDATA */
+    curl_easy_setopt(curl, CURLOPT_XFERINFODATA, &prog);
+#endif
+
     curl_easy_setopt(curl, CURLOPT_NOPROGRESS, 0L);
     res = curl_easy_perform(curl);
 

docs/examples/sepheaders.c

@@ -54,23 +54,22 @@ int main(void)
   curl_easy_setopt(curl_handle, CURLOPT_WRITEFUNCTION, write_data);
 
   /* open the files */
-  headerfile = fopen(headerfilename,"w");
+  headerfile = fopen(headerfilename,"wb");
   if (headerfile == NULL) {
     curl_easy_cleanup(curl_handle);
     return -1;
   }
-  bodyfile = fopen(bodyfilename,"w");
+  bodyfile = fopen(bodyfilename,"wb");
   if (bodyfile == NULL) {
     curl_easy_cleanup(curl_handle);
     return -1;
   }
 
-  /* we want the headers to this file handle */
+  /* we want the headers be written to this file handle */
   curl_easy_setopt(curl_handle,   CURLOPT_WRITEHEADER, headerfile);
 
-  /*
-   * Notice here that if you want the actual data sent anywhere else but
-   * stdout, you should consider using the CURLOPT_WRITEDATA option.  */
+  /* we want the body be written to this file handle instead of stdout */
+  curl_easy_setopt(curl_handle,   CURLOPT_WRITEDATA, bodyfile);
 
   /* get it! */
   curl_easy_perform(curl_handle);
@@ -78,6 +77,9 @@ int main(void)
   /* close the header file */
   fclose(headerfile);
 
+  /* close the body file */
+  fclose(bodyfile);
+
   /* cleanup curl stuff */
   curl_easy_cleanup(curl_handle);
 

docs/examples/usercertinmem.c

@@ -0,0 +1,211 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Example using an in memory PEM user certificate and RSA key to retrieve an
+ * https page.
+ * Written by Ishan SinghLevett, based on Theo Borm's cacertinmem.c.
+ * Note this example does not use a CA certificate, however one should be used
+ * if you want a properly secure connection
+ */
+
+#include <openssl/ssl.h>
+#include <openssl/x509.h>
+#include <openssl/pem.h>
+#include <curl/curl.h>
+#include <stdio.h>
+
+static size_t writefunction(void *ptr, size_t size, size_t nmemb, void *stream)
+{
+  fwrite(ptr,size,nmemb,stream);
+  return(nmemb*size);
+}
+
+static CURLcode sslctx_function(CURL *curl, void *sslctx, void *parm)
+{
+  X509 *cert = NULL;
+  BIO *bio = NULL;
+  BIO *kbio = NULL;
+  RSA *rsa = NULL;
+  int ret;
+
+  const char *mypem = /* www.cacert.org */
+    "-----BEGIN CERTIFICATE-----\n"\
+    "MIIHPTCCBSWgAwIBAgIBADANBgkqhkiG9w0BAQQFADB5MRAwDgYDVQQKEwdSb290\n"\
+    "IENBMR4wHAYDVQQLExVodHRwOi8vd3d3LmNhY2VydC5vcmcxIjAgBgNVBAMTGUNB\n"\
+    "IENlcnQgU2lnbmluZyBBdXRob3JpdHkxITAfBgkqhkiG9w0BCQEWEnN1cHBvcnRA\n"\
+    "Y2FjZXJ0Lm9yZzAeFw0wMzAzMzAxMjI5NDlaFw0zMzAzMjkxMjI5NDlaMHkxEDAO\n"\
+    "BgNVBAoTB1Jvb3QgQ0ExHjAcBgNVBAsTFWh0dHA6Ly93d3cuY2FjZXJ0Lm9yZzEi\n"\
+    "MCAGA1UEAxMZQ0EgQ2VydCBTaWduaW5nIEF1dGhvcml0eTEhMB8GCSqGSIb3DQEJ\n"\
+    "ARYSc3VwcG9ydEBjYWNlcnQub3JnMIICIjANBgkqhkiG9w0BAQEFAAOCAg8AMIIC\n"\
+    "CgKCAgEAziLA4kZ97DYoB1CW8qAzQIxL8TtmPzHlawI229Z89vGIj053NgVBlfkJ\n"\
+    "8BLPRoZzYLdufujAWGSuzbCtRRcMY/pnCujW0r8+55jE8Ez64AO7NV1sId6eINm6\n"\
+    "zWYyN3L69wj1x81YyY7nDl7qPv4coRQKFWyGhFtkZip6qUtTefWIonvuLwphK42y\n"\
+    "fk1WpRPs6tqSnqxEQR5YYGUFZvjARL3LlPdCfgv3ZWiYUQXw8wWRBB0bF4LsyFe7\n"\
+    "w2t6iPGwcswlWyCR7BYCEo8y6RcYSNDHBS4CMEK4JZwFaz+qOqfrU0j36NK2B5jc\n"\
+    "G8Y0f3/JHIJ6BVgrCFvzOKKrF11myZjXnhCLotLddJr3cQxyYN/Nb5gznZY0dj4k\n"\
+    "epKwDpUeb+agRThHqtdB7Uq3EvbXG4OKDy7YCbZZ16oE/9KTfWgu3YtLq1i6L43q\n"\
+    "laegw1SJpfvbi1EinbLDvhG+LJGGi5Z4rSDTii8aP8bQUWWHIbEZAWV/RRyH9XzQ\n"\
+    "QUxPKZgh/TMfdQwEUfoZd9vUFBzugcMd9Zi3aQaRIt0AUMyBMawSB3s42mhb5ivU\n"\
+    "fslfrejrckzzAeVLIL+aplfKkQABi6F1ITe1Yw1nPkZPcCBnzsXWWdsC4PDSy826\n"\
+    "YreQQejdIOQpvGQpQsgi3Hia/0PsmBsJUUtaWsJx8cTLc6nloQsCAwEAAaOCAc4w\n"\
+    "ggHKMB0GA1UdDgQWBBQWtTIb1Mfz4OaO873SsDrusjkY0TCBowYDVR0jBIGbMIGY\n"\
+    "gBQWtTIb1Mfz4OaO873SsDrusjkY0aF9pHsweTEQMA4GA1UEChMHUm9vdCBDQTEe\n"\
+    "MBwGA1UECxMVaHR0cDovL3d3dy5jYWNlcnQub3JnMSIwIAYDVQQDExlDQSBDZXJ0\n"\
+    "IFNpZ25pbmcgQXV0aG9yaXR5MSEwHwYJKoZIhvcNAQkBFhJzdXBwb3J0QGNhY2Vy\n"\
+    "dC5vcmeCAQAwDwYDVR0TAQH/BAUwAwEB/zAyBgNVHR8EKzApMCegJaAjhiFodHRw\n"\
+    "czovL3d3dy5jYWNlcnQub3JnL3Jldm9rZS5jcmwwMAYJYIZIAYb4QgEEBCMWIWh0\n"\
+    "dHBzOi8vd3d3LmNhY2VydC5vcmcvcmV2b2tlLmNybDA0BglghkgBhvhCAQgEJxYl\n"\
+    "aHR0cDovL3d3dy5jYWNlcnQub3JnL2luZGV4LnBocD9pZD0xMDBWBglghkgBhvhC\n"\
+    "AQ0ESRZHVG8gZ2V0IHlvdXIgb3duIGNlcnRpZmljYXRlIGZvciBGUkVFIGhlYWQg\n"\
+    "b3ZlciB0byBodHRwOi8vd3d3LmNhY2VydC5vcmcwDQYJKoZIhvcNAQEEBQADggIB\n"\
+    "ACjH7pyCArpcgBLKNQodgW+JapnM8mgPf6fhjViVPr3yBsOQWqy1YPaZQwGjiHCc\n"\
+    "nWKdpIevZ1gNMDY75q1I08t0AoZxPuIrA2jxNGJARjtT6ij0rPtmlVOKTV39O9lg\n"\
+    "18p5aTuxZZKmxoGCXJzN600BiqXfEVWqFcofN8CCmHBh22p8lqOOLlQ+TyGpkO/c\n"\
+    "gr/c6EWtTZBzCDyUZbAEmXZ/4rzCahWqlwQ3JNgelE5tDlG+1sSPypZt90Pf6DBl\n"\
+    "Jzt7u0NDY8RD97LsaMzhGY4i+5jhe1o+ATc7iwiwovOVThrLm82asduycPAtStvY\n"\
+    "sONvRUgzEv/+PDIqVPfE94rwiCPCR/5kenHA0R6mY7AHfqQv0wGP3J8rtsYIqQ+T\n"\
+    "SCX8Ev2fQtzzxD72V7DX3WnRBnc0CkvSyqD/HMaMyRa+xMwyN2hzXwj7UfdJUzYF\n"\
+    "CpUCTPJ5GhD22Dp1nPMd8aINcGeGG7MW9S/lpOt5hvk9C8JzC6WZrG/8Z7jlLwum\n"\
+    "GCSNe9FINSkYQKyTYOGWhlC0elnYjyELn8+CkcY7v2vcB5G5l1YjqrZslMZIBjzk\n"\
+    "zk6q5PYvCdxTby78dOs6Y5nCpqyJvKeyRKANihDjbPIky/qbn3BHLt4Ui9SyIAmW\n"\
+    "omTxJBzcoTWcFbLUvFUufQb1nA5V9FrWk9p2rSVzTMVD\n"\
+    "-----END CERTIFICATE-----\n";
+
+/*replace the XXX with the actual RSA key*/
+  const char *mykey =
+    "-----BEGIN RSA PRIVATE KEY-----\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n"\
+    "-----END RSA PRIVATE KEY-----\n";
+
+  (void)curl; /* avoid warnings */
+  (void)parm; /* avoid warnings */
+
+  /* get a BIO */
+  bio = BIO_new_mem_buf((char *)mypem, -1);
+
+  if (bio == NULL) {
+    printf("BIO_new_mem_buf failed\n");
+  }
+
+  /* use it to read the PEM formatted certificate from memory into an X509
+   * structure that SSL can use
+   */
+  cert = PEM_read_bio_X509(bio, NULL, 0, NULL);
+  if (cert == NULL) {
+    printf("PEM_read_bio_X509 failed...\n");
+  }
+
+  /*tell SSL to use the X509 certificate*/
+  ret = SSL_CTX_use_certificate((SSL_CTX*)sslctx, cert);
+  if (ret != 1) {
+    printf("Use certificate failed\n");
+  }
+
+  /*create a bio for the RSA key*/
+  kbio = BIO_new_mem_buf((char *)mykey, -1);
+  if (kbio == NULL) {
+    printf("BIO_new_mem_buf failed\n");
+  }
+
+  /*read the key bio into an RSA object*/
+  rsa = PEM_read_bio_RSAPrivateKey(kbio, NULL, 0, NULL);
+  if (rsa == NULL) {
+    printf("Failed to create key bio\n");
+  }
+
+  /*tell SSL to use the RSA key from memory*/
+  ret = SSL_CTX_use_RSAPrivateKey((SSL_CTX*)sslctx, rsa);
+  if (ret != 1) {
+    printf("Use Key failed\n");
+  }
+
+
+  /* all set to go */
+  return CURLE_OK ;
+}
+
+int main(void)
+{
+  CURL *ch;
+  CURLcode rv;
+
+  rv = curl_global_init(CURL_GLOBAL_ALL);
+  ch = curl_easy_init();
+  rv = curl_easy_setopt(ch,CURLOPT_VERBOSE, 0L);
+  rv = curl_easy_setopt(ch,CURLOPT_HEADER, 0L);
+  rv = curl_easy_setopt(ch,CURLOPT_NOPROGRESS, 1L);
+  rv = curl_easy_setopt(ch,CURLOPT_NOSIGNAL, 1L);
+  rv = curl_easy_setopt(ch,CURLOPT_WRITEFUNCTION, *writefunction);
+  rv = curl_easy_setopt(ch,CURLOPT_WRITEDATA, stdout);
+  rv = curl_easy_setopt(ch,CURLOPT_HEADERFUNCTION, *writefunction);
+  rv = curl_easy_setopt(ch,CURLOPT_WRITEHEADER, stderr);
+  rv = curl_easy_setopt(ch,CURLOPT_SSLCERTTYPE,"PEM");
+
+  /* both VERIFYPEER and VERIFYHOST are set to 0 in this case because there is
+     no CA certificate*/
+
+  rv = curl_easy_setopt(ch,CURLOPT_SSL_VERIFYPEER, 0L);
+  rv = curl_easy_setopt(ch,CURLOPT_SSL_VERIFYHOST, 0L);
+  rv = curl_easy_setopt(ch, CURLOPT_URL, "https://www.example.com/");
+  rv = curl_easy_setopt(ch, CURLOPT_SSLKEYTYPE, "PEM");
+
+  /* first try: retrieve page without user certificate and key -> will fail
+   */
+  rv = curl_easy_perform(ch);
+  if (rv==CURLE_OK) {
+    printf("*** transfer succeeded ***\n");
+  }
+  else {
+    printf("*** transfer failed ***\n");
+  }
+
+  /* second try: retrieve page using user certificate and key -> will succeed
+   * load the certificate and key by installing a function doing the necessary
+   * "modifications" to the SSL CONTEXT just before link init
+   */
+  rv = curl_easy_setopt(ch,CURLOPT_SSL_CTX_FUNCTION, *sslctx_function);
+  rv = curl_easy_perform(ch);
+  if (rv==CURLE_OK) {
+    printf("*** transfer succeeded ***\n");
+  }
+  else {
+    printf("*** transfer failed ***\n");
+  }
+
+  curl_easy_cleanup(ch);
+  curl_global_cleanup();
+  return rv;
+}

docs/examples/xmlstream.c

@@ -0,0 +1,158 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Stream-parse a document using the streaming Expat parser.
+ * Written by David Strauss
+ *
+ * Expat => http://www.libexpat.org/
+ *
+ * gcc -Wall -I/usr/local/include xmlstream.c -lcurl -lexpat -o xmlstream
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+
+#include <expat.h>
+#include <curl/curl.h>
+
+struct MemoryStruct {
+  char *memory;
+  size_t size;
+};
+
+struct ParserStruct {
+  int ok;
+  size_t tags;
+  size_t depth;
+  struct MemoryStruct characters;
+};
+
+static void startElement(void *userData, const XML_Char *name, const XML_Char **atts)
+{
+  struct ParserStruct *state = (struct ParserStruct *) userData;
+  state->tags++;
+  state->depth++;
+
+  /* Get a clean slate for reading in character data. */
+  free(state->characters.memory);
+  state->characters.memory = NULL;
+  state->characters.size = 0;
+}
+
+static void characterDataHandler(void *userData, const XML_Char *s, int len)
+{
+  struct ParserStruct *state = (struct ParserStruct *) userData;
+  struct MemoryStruct *mem = &state->characters;
+
+  mem->memory = realloc(mem->memory, mem->size + len + 1);
+  if(mem->memory == NULL) {
+    /* Out of memory. */
+    fprintf(stderr, "Not enough memory (realloc returned NULL).\n");
+    state->ok = 0;
+    return;
+  }
+
+  memcpy(&(mem->memory[mem->size]), s, len);
+  mem->size += len;
+  mem->memory[mem->size] = 0;
+}
+
+static void endElement(void *userData, const XML_Char *name)
+{
+  struct ParserStruct *state = (struct ParserStruct *) userData;
+  state->depth--;
+
+  printf("%5lu   %10lu   %s\n", state->depth, state->characters.size, name);
+}
+
+static size_t parseStreamCallback(void *contents, size_t length, size_t nmemb, void *userp)
+{
+  XML_Parser parser = (XML_Parser) userp;
+  size_t real_size = length * nmemb;
+  struct ParserStruct *state = (struct ParserStruct *) XML_GetUserData(parser);
+
+  /* Only parse if we're not already in a failure state. */
+  if (state->ok && XML_Parse(parser, contents, real_size, 0) == 0) {
+    int error_code = XML_GetErrorCode(parser);
+    fprintf(stderr, "Parsing response buffer of length %lu failed with error code %d (%s).\n",
+            real_size, error_code, XML_ErrorString(error_code));
+    state->ok = 0;
+  }
+
+  return real_size;
+}
+
+int main(void)
+{
+  CURL *curl_handle;
+  CURLcode res;
+  XML_Parser parser;
+  struct ParserStruct state;
+
+  /* Initialize the state structure for parsing. */
+  memset(&state, 0, sizeof(struct ParserStruct));
+  state.ok = 1;
+
+  /* Initialize a namespace-aware parser. */
+  parser = XML_ParserCreateNS(NULL, '\0');
+  XML_SetUserData(parser, &state);
+  XML_SetElementHandler(parser, startElement, endElement);
+  XML_SetCharacterDataHandler(parser, characterDataHandler);
+
+  /* Initalize a libcurl handle. */
+  curl_global_init(CURL_GLOBAL_ALL ^ CURL_GLOBAL_SSL);
+  curl_handle = curl_easy_init();
+  curl_easy_setopt(curl_handle, CURLOPT_URL, "http://www.w3schools.com/xml/simple.xml");
+  curl_easy_setopt(curl_handle, CURLOPT_WRITEFUNCTION, parseStreamCallback);
+  curl_easy_setopt(curl_handle, CURLOPT_WRITEDATA, (void *)parser);
+
+  printf("Depth   Characters   Closing Tag\n");
+
+  /* Perform the request and any follow-up parsing. */
+  res = curl_easy_perform(curl_handle);
+  if(res != CURLE_OK) {
+    fprintf(stderr, "curl_easy_perform() failed: %s\n",
+            curl_easy_strerror(res));
+  }
+  else if (state.ok) {
+    /* Expat requires one final call to finalize parsing. */
+    if (XML_Parse(parser, NULL, 0, 1) == 0) {
+      int error_code = XML_GetErrorCode(parser);
+      fprintf(stderr, "Finalizing parsing failed with error code %d (%s).\n",
+              error_code, XML_ErrorString(error_code));
+    }
+    else {
+      printf("                     --------------\n");
+      printf("                     %lu tags total\n", state.tags);
+    }
+  }
+
+  /* Clean up. */
+  free(state.characters.memory);
+  XML_ParserFree(parser);
+  curl_easy_cleanup(curl_handle);
+  curl_global_cleanup();
+
+  return 0;
+}

docs/libcurl/curl_easy_getinfo.3

@@ -232,7 +232,7 @@ Pass a pointer to a char pointer to receive a pointer to a string holding the
 most recent RTSP Session ID.
 
 Applications wishing to resume an RTSP session on another connection should
-retreive this info before closing the active connection.
+retrieve this info before closing the active connection.
 .IP CURLINFO_RTSP_CLIENT_CSEQ
 Pass a pointer to a long to receive the next CSeq that will be used by the
 application.
@@ -244,7 +244,7 @@ by the application.
 unimplemented).\fP
 
 Applications wishing to resume an RTSP session on another connection should
-retreive this info before closing the active connection.
+retrieve this info before closing the active connection.
 .IP CURLINFO_RTSP_CSEQ_RECV
 Pass a pointer to a long to receive the most recently received CSeq from the
 server. If your application encounters a \fICURLE_RTSP_CSEQ_ERROR\fP then you

docs/libcurl/curl_easy_pause.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -68,6 +68,18 @@ code means something wrong occurred after the new state was set.  See the
 .SH AVAILABILITY
 This function was added in libcurl 7.18.0. Before this version, there was no
 explicit support for pausing transfers.
+.SH "USAGE WITH THE MULTI-SOCKET INTERFACE"
+Before libcurl 7.32.0, when a specific handle was unpaused with this function,
+there was no particular forced rechecking or similar of the socket's state,
+which made the continuation of the transfer get delayed until next
+multi-socket call invoke or even longer. Alternatively, the user could
+forcibly call for example curl_multi_socket_all(3) - with a rather hefty
+performance penalty.
+
+Starting in libcurl 7.32.0, unpausing a transfer will schedule a timeout
+trigger for that handle 1 millisecond into the future, so that a
+curl_multi_socket_action( ... CURL_SOCKET_TIMEOUT) can be used immediately
+afterwards to get the transfer going again as desired.
 .SH "MEMORY USE"
 When pausing a read by returning the magic return code from a write callback,
 the read data is already in libcurl's internal buffers so it'll have to keep

docs/libcurl/curl_easy_setopt.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -58,7 +58,8 @@ The \fIhandle\fP is the return code from a \fIcurl_easy_init(3)\fP or
 Set the parameter to 1 to get the library to display a lot of verbose
 information about its operations. Very useful for libcurl and/or protocol
 debugging and understanding. The verbose information will be sent to stderr,
-or the stream set with \fICURLOPT_STDERR\fP.
+or the stream set with \fICURLOPT_STDERR\fP. The default value for this
+parameter is 0.
 
 You hardly ever want this set in production use, you will almost always want
 this when you debug/report problems. Another neat option for debugging is the
@@ -66,11 +67,11 @@ this when you debug/report problems. Another neat option for debugging is the
 .IP CURLOPT_HEADER
 A parameter set to 1 tells the library to include the header in the body
 output. This is only relevant for protocols that actually have headers
-preceding the data (like HTTP).
+preceding the data (like HTTP). The default value for this parameter is 0.
 .IP CURLOPT_NOPROGRESS
 Pass a long. If set to 1, it tells the library to shut off the progress meter
 completely. It will also prevent the \fICURLOPT_PROGRESSFUNCTION\fP from
-getting called.
+getting called. The default value for this parameter is 1.
 
 Future versions of libcurl are likely to not have any built-in progress meter
 at all.
@@ -79,6 +80,7 @@ Pass a long. If it is 1, libcurl will not use any functions that
 install signal handlers or any functions that cause signals to be sent to the
 process. This option is mainly here to allow multi-threaded unix applications
 to still set/use all timeout options etc, without risking getting signals.
+The default value for this parameter is 0.
 (Added in 7.10)
 
 If this option is set and libcurl has been built with the standard name
@@ -180,8 +182,9 @@ means 100K.
 .IP CURLOPT_WRITEDATA
 Data pointer to pass to the file write function. If you use the
 \fICURLOPT_WRITEFUNCTION\fP option, this is the pointer you'll get as
-input. If you don't use a callback, you must pass a 'FILE *' as libcurl will
-pass this to fwrite() when writing data.
+input. If you don't use a callback, you must pass a 'FILE *' (cast
+to 'void *') as libcurl will pass this to fwrite() when writing data.
+By default, the value of this parameter is unspecified.
 
 The internal \fICURLOPT_WRITEFUNCTION\fP will write the data to the FILE *
 given with this option, or to stdout if this option hasn't been set.
@@ -226,7 +229,7 @@ userdata set with \fICURLOPT_READDATA\fP.
 Data pointer to pass to the file read function. If you use the
 \fICURLOPT_READFUNCTION\fP option, this is the pointer you'll get as input. If
 you don't specify a read callback but instead rely on the default internal
-read function, this data must be a valid readable FILE *.
+read function, this data must be a valid readable FILE * (cast to 'void *').
 
 If you're using libcurl as a win32 DLL, you MUST use a
 \fICURLOPT_READFUNCTION\fP if you set this option.
@@ -240,13 +243,15 @@ gets called by libcurl when something special I/O-related needs to be done
 that the library can't do by itself. For now, rewinding the read data stream
 is the only action it can request. The rewinding of the read data stream may
 be necessary when doing a HTTP PUT or POST with a multi-pass authentication
-method.  (Option added in 7.12.3).
+method. By default, this parameter is set to NULL.  (Option added in 7.12.3).
 
-Use \fICURLOPT_SEEKFUNCTION\fP instead to provide seeking!
+Use \fICURLOPT_SEEKFUNCTION\fP instead to provide seeking! If
+\fICURLOPT_SEEKFUNCTION\fP is set, this parameter will be ignored when seeking.
 .IP CURLOPT_IOCTLDATA
 Pass a pointer that will be untouched by libcurl and passed as the 3rd
-argument in the ioctl callback set with \fICURLOPT_IOCTLFUNCTION\fP.  (Option
-added in 7.12.3)
+argument in the ioctl callback set with \fICURLOPT_IOCTLFUNCTION\fP.
+By default, the value of this parameter is unspecified.  (Option added in
+7.12.3)
 .IP CURLOPT_SEEKFUNCTION
 Pass a pointer to a function that matches the following prototype: \fBint
 function(void *instream, curl_off_t offset, int origin);\fP This function gets
@@ -262,6 +267,8 @@ success, 1 (CURL_SEEKFUNC_FAIL) to cause the upload operation to fail or 2
 free to work around the problem if possible. The latter can sometimes be done
 by instead reading from the input or similar.
 
+By default, this parameter is unset.
+
 If you forward the input arguments directly to "fseek" or "lseek", note that
 the data type for \fIoffset\fP is not the same as defined for curl_off_t on
 many systems! (Option added in 7.18.0)
@@ -271,7 +278,8 @@ Data pointer to pass to the file seek function. If you use the
 you don't specify a seek callback, NULL is passed. (Option added in 7.18.0)
 .IP CURLOPT_SOCKOPTFUNCTION
 Pass a pointer to a function that matches the following prototype: \fBint
-function(void *clientp, curl_socket_t curlfd, curlsocktype purpose);\fP. This
+function(void *clientp, curl_socket_t curlfd, curlsocktype purpose);\fP. By
+default, this parameter is unset. If set, this
 function gets called by libcurl after the socket() call but before the
 connect() call. The callback's \fIpurpose\fP argument identifies the exact
 purpose for this particular socket:
@@ -293,6 +301,7 @@ in fact already connected and then libcurl will not attempt to connect it.
 .IP CURLOPT_SOCKOPTDATA
 Pass a pointer that will be untouched by libcurl and passed as the first
 argument in the sockopt callback set with \fICURLOPT_SOCKOPTFUNCTION\fP.
+The default value of this parameter is unspecified.
 (Option added in 7.16.0)
 .IP CURLOPT_OPENSOCKETFUNCTION
 Pass a pointer to a function that matches the following prototype:
@@ -317,6 +326,7 @@ blacklisting.  The default behavior is:
 .IP CURLOPT_OPENSOCKETDATA
 Pass a pointer that will be untouched by libcurl and passed as the first
 argument in the opensocket callback set with \fICURLOPT_OPENSOCKETFUNCTION\fP.
+The default value of this parameter is unspecified.
 (Option added in 7.17.1.)
 .IP CURLOPT_CLOSESOCKETFUNCTION
 Pass a pointer to a function that matches the following prototype: \fBint
@@ -328,17 +338,38 @@ success and 1 if there was an error.  (Option added in 7.21.7)
 .IP CURLOPT_CLOSESOCKETDATA
 Pass a pointer that will be untouched by libcurl and passed as the first
 argument in the closesocket callback set with
-\fICURLOPT_CLOSESOCKETFUNCTION\fP.  (Option added in 7.21.7)
+\fICURLOPT_CLOSESOCKETFUNCTION\fP.
+The default value of this parameter is unspecified.
+(Option added in 7.21.7)
 .IP CURLOPT_PROGRESSFUNCTION
-Pass a pointer to a function that matches the following prototype: \fBint
-function(void *clientp, double dltotal, double dlnow, double ultotal, double
-ulnow); \fP. This function gets called by libcurl instead of its internal
-equivalent with a frequent interval during operation (roughly once per second
-or sooner) no matter if data is being transferred or not.  Unknown/unused
-argument values passed to the callback will be set to zero (like if you only
-download data, the upload size will remain 0). Returning a non-zero value from
-this callback will cause libcurl to abort the transfer and return
-\fICURLE_ABORTED_BY_CALLBACK\fP.
+Pass a pointer to a function that matches the following prototype:
+
+\fBint function(void *clientp, double dltotal, double dlnow, double ultotal,
+double ulnow);\fP
+
+This function gets called by libcurl instead of its internal equivalent with a
+frequent interval. While data is being transferred it will be called very
+frequently, and during slow periods like when nothing is being transferred it
+can slow down to about one call per second.
+
+\fIclientp\fP is the pointer set with \fICURLOPT_PROGRESSDATA\fP, it is not
+actually used by libcurl but is only passed along from the application to the
+callback.
+
+The callback gets told how much data libcurl will transfer and has
+transferred, in number of bytes. \fIdltotal\fP is the total number of bytes
+libcurl expects to download in this transfer. \fIdlnow\fP is the number of
+bytes downloaded so far. \fIultotal\fP is the total number of bytes libcurl
+expects to upload in this transfer. \fIulnow\fP is the number of bytes
+uploaded so far.
+
+Unknown/unused argument values passed to the callback will be set to zero
+(like if you only download data, the upload size will remain 0). Many times
+the callback will be called one or more times first, before it knows the data
+sizes so a program must be made to handle that.
+
+Returning a non-zero value from this callback will cause libcurl to abort the
+transfer and return \fICURLE_ABORTED_BY_CALLBACK\fP.
 
 If you transfer data with the multi interface, this function will not be
 called during periods of idleness unless you call the appropriate libcurl
@@ -346,9 +377,54 @@ function that performs transfers.
 
 \fICURLOPT_NOPROGRESS\fP must be set to 0 to make this function actually
 get called.
+.IP CURLOPT_XFERINFOFUNCTION
+Pass a pointer to a function that matches the following prototype:
+
+.nf
+\fBint function(void *clientp, curl_off_t dltotal, curl_off_t dlnow,
+                curl_off_t ultotal, curl_off_t ulnow);\fP
+.fi
+
+This function gets called by libcurl instead of its internal equivalent with a
+frequent interval. While data is being transferred it will be called very
+frequently, and during slow periods like when nothing is being transferred it
+can slow down to about one call per second.
+
+\fIclientp\fP is the pointer set with \fICURLOPT_XFERINFODATA\fP, it is only
+passed along from the application to the callback.
+
+The callback gets told how much data libcurl will transfer and has
+transferred, in number of bytes. \fIdltotal\fP is the total number of bytes
+libcurl expects to download in this transfer. \fIdlnow\fP is the number of
+bytes downloaded so far. \fIultotal\fP is the total number of bytes libcurl
+expects to upload in this transfer. \fIulnow\fP is the number of bytes
+uploaded so far.
+
+Unknown/unused argument values passed to the callback will be set to zero
+(like if you only download data, the upload size will remain 0). Many times
+the callback will be called one or more times first, before it knows the data
+sizes so a program must be made to handle that.
+
+Returning a non-zero value from this callback will cause libcurl to abort the
+transfer and return \fICURLE_ABORTED_BY_CALLBACK\fP.
+
+If you transfer data with the multi interface, this function will not be
+called during periods of idleness unless you call the appropriate libcurl
+function that performs transfers.
+
+\fICURLOPT_NOPROGRESS\fP must be set to 0 to make this function actually
+get called.
+
+(Added in 7.32.0)
 .IP CURLOPT_PROGRESSDATA
 Pass a pointer that will be untouched by libcurl and passed as the first
 argument in the progress callback set with \fICURLOPT_PROGRESSFUNCTION\fP.
+The default value of this parameter is unspecified.
+.IP CURLOPT_XFERINFODATA
+Pass a pointer that will be untouched by libcurl and passed as the first
+argument in the progress callback set with \fICURLOPT_XFERINFOFUNCTION\fP.
+The default value of this parameter is unspecified. This option is an alias
+for CURLOPT_PROGRESSDATA. (Added in 7.32.0)
 .IP CURLOPT_HEADERFUNCTION
 Pass a pointer to a function that matches the following prototype:
 \fBsize_t function( void *ptr, size_t size, size_t nmemb, void
@@ -607,12 +683,20 @@ scheme://host:port/path
 
 For a greater explanation of the format please see RFC3986.
 
-If the given URL lacks the scheme, or protocol, part ("http://" or "ftp://"
-etc), libcurl will attempt to resolve which protocol to use based on the
-given host mame. If the protocol is not supported, libcurl will return
-(\fICURLE_UNSUPPORTED_PROTOCOL\fP) when you call \fIcurl_easy_perform(3)\fP
-or \fIcurl_multi_perform(3)\fP. Use \fIcurl_version_info(3)\fP for detailed
-information on which protocols are supported.
+If the given URL lacks the scheme (such as "http://" or "ftp://" etc) then
+libcurl will attempt to resolve the protocol based on one of the following
+given host names:
+
+HTTP, FTP, DICT, LDAP, IMAP, POP3 or SMTP
+
+(POP3 and SMTP added in 7.31.0)
+
+Should the protocol, either that specified by the scheme or deduced by libcurl
+from the host name, not be supported by libcurl then
+(\fICURLE_UNSUPPORTED_PROTOCOL\fP) will be returned from either the
+\fIcurl_easy_perform(3)\fP or \fIcurl_multi_perform(3)\fP functions when you
+call them. Use \fIcurl_version_info(3)\fP for detailed information of which
+protocols are supported by the build of libcurl you are using.
 
 The host part of the URL contains the address of the server that you want to
 connect to. This can be the fully qualified domain name of the server, the
@@ -627,17 +711,23 @@ http://192.168.0.1/
 
 http://[2001:1890:1112:1::20]/
 
-It is also possible to specify the user name and password as part of the
-host, for some protocols, when connecting to servers that require
-authentication.
-
-For example the following types of authentication support this:
+It is also possible to specify the user name, password and any supported login
+options as part of the host, for the following protocols, when connecting to
+servers that require authentication:
 
 http://user:password@www.example.com
 
 ftp://user:password@ftp.example.com
 
-pop3://user:password@mail.example.com
+imap://user:password;options@mail.example.com
+
+pop3://user:password;options@mail.example.com
+
+smtp://user:password;options@mail.example.com
+
+At present only IMAP, POP3 and SMTP support login options as part of the host.
+For more information about the login options in URL syntax please see RFC2384,
+RFC5092 and IETF draft draft-earhart-url-smtp-00.txt (Added in 7.31.0).
 
 The port is optional and when not specified libcurl will use the default port
 based on the determined or specified protocol: 80 for HTTP, 21 for FTP and 25
@@ -714,12 +804,39 @@ the HELO / EHLO command to the mail server at example.com.
 
 .B POP3
 
-The path part of a POP3 request specifies the mailbox (message) to retrieve.
-If the mailbox is not specified then a list of waiting messages is returned
-instead.
+The path part of a POP3 request specifies the message ID to retrieve. If the
+ID is not specified then a list of waiting messages is returned instead.
 
-pop3://user:password@mail.example.com - This lists the available messages
-pop3://user:password@mail.example.com/1 - This retrieves the first message
+pop3://user:password@mail.example.com - This lists the available messages for
+the user
+
+pop3://user:password@mail.example.com/1 - This retrieves the first message for
+the user
+
+.B IMAP
+
+The path part of an IMAP request not only specifies the mailbox to list (Added
+in 7.30.0) or select, but can also be used to check the UIDVALIDITY of the
+mailbox and to specify the UID and SECTION of the message to fetch (Added in
+7.30.0).
+
+imap://user:password@mail.example.com - Performs a top level folder list
+
+imap://user:password@mail.example.com/INBOX - Performs a folder list on the
+user's inbox
+
+imap://user:password@mail.example.com/INBOX/;UID=1 - Selects the user's inbox
+and fetches message 1
+
+imap://user:password@mail.example.com/INBOX;UIDVALIDITY=50/;UID=2 - Selects
+the user's inbox, checks the UIDVALIDITY of the mailbox is 50 and fetches
+message 2 if it is
+
+imap://user:password@mail.example.com/INBOX/;UID=3/;SECTION=TEXT - Selects the
+user's inbox and fetches message 3 with only the text portion of the message
+
+For more information about the individual components of an IMAP URL please
+see RFC5092.
 
 .B SCP
 
@@ -1000,8 +1117,8 @@ the full path name to the file you want libcurl to use as .netrc file. If this
 option is omitted, and \fICURLOPT_NETRC\fP is set, libcurl will attempt to
 find a .netrc file in the current user's home directory. (Added in 7.10.9)
 .IP CURLOPT_USERPWD
-Pass a char * as parameter, which should be [user name]:[password] to use for
-the connection. Use \fICURLOPT_HTTPAUTH\fP to decide the authentication method.
+Pass a char * as parameter, pointing to a zero terminated login details string
+for the connection. The format of which is: [user name]:[password];[options].
 
 When using NTLM, you can set the domain by prepending it to the user name and
 separating the domain and name with a forward (/) or backward slash (\\). Like
@@ -1014,10 +1131,18 @@ and password information to hosts using the initial host name (unless
 \fICURLOPT_UNRESTRICTED_AUTH\fP is set), so if libcurl follows locations to
 other hosts it will not send the user and password to those. This is enforced
 to prevent accidental information leakage.
+
+At present only IMAP, POP3 and SMTP support login options as part of the
+details string. For more information about the login options please see
+RFC2384, RFC5092 and IETF draft draft-earhart-url-smtp-00.txt (Added in 7.31.0).
+
+Use \fICURLOPT_HTTPAUTH\fP to specify the authentication method for HTTP based
+connections.
 .IP CURLOPT_PROXYUSERPWD
 Pass a char * as parameter, which should be [user name]:[password] to use for
-the connection to the HTTP proxy.  Use \fICURLOPT_PROXYAUTH\fP to decide
-the authentication method.
+the connection to the HTTP proxy.
+
+Use \fICURLOPT_PROXYAUTH\fP to specify the authentication method.
 .IP CURLOPT_USERNAME
 Pass a char * as parameter, which should be pointing to the zero terminated
 user name to use for the transfer.
@@ -1094,7 +1219,7 @@ Microsoft. It uses a challenge-response and hash concept similar to Digest, to
 prevent the password from being eavesdropped.
 
 You need to build libcurl with either OpenSSL, GnuTLS or NSS support for this
-option to work, or build libcurl on Windows.
+option to work, or build libcurl on Windows with SSPI support.
 .IP CURLAUTH_NTLM_WB
 NTLM delegating to winbind helper. Authentication is performed by a separate
 binary application that is executed when needed. The name of the application
@@ -1155,6 +1280,15 @@ actual name and password with the \fICURLOPT_PROXYUSERPWD\fP option. The
 bitmask can be constructed by or'ing together the bits listed above for the
 \fICURLOPT_HTTPAUTH\fP option. As of this writing, only Basic, Digest and NTLM
 work. (Added in 7.10.7)
+.IP CURLOPT_SASL_IR
+Pass a long. If the value is 1, curl will send the initial response to the
+server in the first authentication packet in order to reduce the number of
+ping pong requests. Only applicable to supporting SASL authentication
+mechanisms and to the IMAP, POP3 and SMTP protocols. (Added in 7.31.0)
+
+Note: Whilst IMAP supports this option there is no need to explicitly set it,
+as libcurl can determine the feature itself when the server supports the
+SASL-IR CAPABILITY.
 .SH HTTP OPTIONS
 .IP CURLOPT_AUTOREFERER
 Pass a parameter set to 1 to enable this. When enabled, libcurl will
@@ -1352,10 +1486,12 @@ internally, your added one will be used instead. If you add a header with no
 content as in 'Accept:' (no data on the right side of the colon), the
 internally used header will get disabled. Thus, using this option you can add
 new headers, replace internal headers and remove internal headers. To add a
-header with no content, make the content be two quotes: \&"". The headers
-included in the linked list must not be CRLF-terminated, because curl adds
-CRLF after each header item. Failure to comply with this will result in
-strange bugs because the server will most likely ignore part of the headers
+header with no content (nothing to the right side of the colon), use the
+form 'MyHeader;' (note the ending semicolon).
+
+The headers included in the linked list must not be CRLF-terminated, because
+curl adds CRLF after each header item. Failure to comply with this will result
+in strange bugs because the server will most likely ignore part of the headers
 you specified.
 
 The first line in a request (containing the method, usually a GET or POST) is
@@ -1445,7 +1581,7 @@ to GET. Usable if a POST, HEAD, PUT, or a custom request has been used
 previously using the same curl handle.
 
 When setting \fICURLOPT_HTTPGET\fP to 1, it will automatically set
-\fICURLOPT_NOBODY\fP to 0 (since 7.14.1).
+\fICURLOPT_NOBODY\fP to 0 and \fICURLOPT_UPLOAD\fP to 0.
 .IP CURLOPT_HTTP_VERSION
 Pass a long, set to one of the values described below. They force libcurl to
 use the specific HTTP versions. This is not sensible to do unless you have a
@@ -1468,8 +1604,8 @@ connection. (added in 7.14.1)
 .IP CURLOPT_HTTP_CONTENT_DECODING
 Pass a long to tell libcurl how to act on content decoding. If set to zero,
 content decoding will be disabled. If set to 1 it is enabled. Libcurl has no
-default content decoding but requires you to use \fICURLOPT_ENCODING\fP for
-that. (added in 7.16.2)
+default content decoding but requires you to use \fICURLOPT_ACCEPT_ENCODING\fP
+for that. (added in 7.16.2)
 .IP CURLOPT_HTTP_TRANSFER_DECODING
 Pass a long to tell libcurl how to act on transfer decoding. If set to zero,
 transfer decoding will be disabled, if set to 1 it is enabled
@@ -2168,6 +2304,12 @@ changed with \fICURLOPT_SSLCERTTYPE\fP.
 With NSS this can also be the nickname of the certificate you wish to
 authenticate with. If you want to use a file from the current directory, please
 precede it with "./" prefix, in order to avoid confusion with a nickname.
+
+(iOS and Mac OS X only) With Secure Transport, this string must match the name
+of a certificate that's in the system or user keychain. You should encode this
+string in UTF-8 format in case it contains non-ASCII characters. The private
+key corresponding to the certificate, and certificate chain (if any),  must
+also be present in the keychain. (Added in 7.31.0)
 .IP CURLOPT_SSLCERTTYPE
 Pass a pointer to a zero terminated string as parameter. The string should be
 the format of your certificate. Supported formats are "PEM" and "DER".  (Added
@@ -2176,6 +2318,10 @@ in 7.9.3)
 Pass a pointer to a zero terminated string as parameter. The string should be
 the file name of your private key. The default format is "PEM" and can be
 changed with \fICURLOPT_SSLKEYTYPE\fP.
+
+(iOS and Mac OS X only) This option is ignored if curl was built against Secure
+Transport. Secure Transport expects the private key to be already present in
+the keychain containing the certificate.
 .IP CURLOPT_SSLKEYTYPE
 Pass a pointer to a zero terminated string as parameter. The string should be
 the format of your private key. Supported formats are "PEM", "DER" and "ENG".

docs/libcurl/curl_formadd.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -42,7 +42,7 @@ After the \fIlastitem\fP pointer follow the real arguments.
 The pointers \fIfirstitem\fP and \fIlastitem\fP should both be pointing to
 NULL in the first call to this function. All list-data will be allocated by
 the function itself. You must call \fIcurl_formfree(3)\fP on the
-\fIfirstitem\P after the form post has been done to free the resources.
+\fIfirstitem\fP after the form post has been done to free the resources.
 
 Using POST with HTTP 1.1 implies the use of a "Expect: 100-continue" header.
 You can disable this header with \fICURLOPT_HTTPHEADER\fP as usual.

docs/libcurl/curl_global_init.3

@@ -56,7 +56,8 @@ details of how to use this function.
 .SH FLAGS
 .TP 5
 .B CURL_GLOBAL_ALL
-Initialize everything possible. This sets all known bits.
+Initialize everything possible. This sets all known bits except
+\fBCURL_GLOBAL_ACK_EINTR\fP.
 .TP
 .B CURL_GLOBAL_SSL
 Initialize SSL
@@ -70,6 +71,10 @@ Initialise nothing extra. This sets no bit.
 .B CURL_GLOBAL_DEFAULT
 A sensible default. It will init both SSL and Win32. Right now, this equals
 the functionality of the \fBCURL_GLOBAL_ALL\fP mask.
+.TP
+.B CURL_GLOBAL_ACK_EINTR
+When this flag is set, curl will acknowledge EINTR condition when connecting
+or when waiting for data.  Otherwise, curl waits until full timeout elapses.
 .SH RETURN VALUE
 If this function returns non-zero, something went wrong and you cannot use the
 other curl functions.

docs/libcurl/curl_multi_add_handle.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -29,9 +29,9 @@ CURLMcode curl_multi_add_handle(CURLM *multi_handle, CURL *easy_handle);
 .ad
 .SH DESCRIPTION
 Adds a standard easy handle to the multi stack. This function call will make
-this \fImulti_handle\fP control the specified \fIeasy_handle\fP.
-Furthermore, libcurl now initiates the connection associated with the
-specified \fIeasy_handle\fP.
+this \fImulti_handle\fP control the specified \fIeasy_handle\fP.  Furthermore,
+libcurl now initiates the connection associated with the specified
+\fIeasy_handle\fP.
 
 When an easy handle has been added to a multi stack, you can not and you must
 not use \fIcurl_easy_perform(3)\fP on that handle!
@@ -41,6 +41,12 @@ cache (CURLOPT_DNS_USE_GLOBAL_CACHE), it will be made to use the DNS cache
 that is shared between all easy handles within the multi handle when
 \fIcurl_multi_add_handle(3)\fP is called.
 
+If you have CURLMOPT_TIMERFUNCTION set in the multi handle (and you really
+should if you're working event-based with \fIcurl_multi_socket_action(3)\fP
+and friends), that callback will be called from within this function to ask
+for an updated timer so that your main event loop will get the activity on
+this handle to get started.
+
 The easy handle will remain added until you remove it again with
 \fIcurl_multi_remove_handle(3)\fP. You should remove the easy handle from the
 multi stack before you terminate first the easy handle and then the multi

docs/libcurl/curl_multi_cleanup.3

@@ -41,6 +41,7 @@ handle is no longer connected to the multi handle
 3 - \fIcurl_multi_cleanup(3)\fP should be called when all easy handles are
 removed
 .SH RETURN VALUE
-CURLMcode type, general libcurl multi interface error code.
+CURLMcode type, general libcurl multi interface error code. On success,
+CURLM_OK is returned.
 .SH "SEE ALSO"
 .BR curl_multi_init "(3)," curl_easy_cleanup "(3)," curl_easy_init "(3)"

docs/libcurl/curl_multi_setopt.3

@@ -49,7 +49,7 @@ argument with \fICURLMOPT_SOCKETDATA\fP.  See \fIcurl_multi_socket(3)\fP for
 more callback details.
 .IP CURLMOPT_SOCKETDATA
 Pass a pointer to whatever you want passed to the \fBcurl_socket_callback\fP's
-forth argument, the userp pointer. This is not used by libcurl but only
+fourth argument, the userp pointer. This is not used by libcurl but only
 passed-thru as-is. Set the callback pointer with
 \fICURLMOPT_SOCKETFUNCTION\fP.
 .IP CURLMOPT_PIPELINING
@@ -61,14 +61,17 @@ on the same connection rather than being executed in parallel. (Added in
 7.16.0)
 .IP CURLMOPT_TIMERFUNCTION
 Pass a pointer to a function matching the \fBcurl_multi_timer_callback\fP
-prototype.  This function will then be called when the timeout value
+prototype: int curl_multi_timer_callback(CURLM *multi /* multi handle */,
+long timeout_ms /* timeout in milliseconds */, void *userp /* TIMERDATA */).
+This function will then be called when the timeout value
 changes. The timeout value is at what latest time the application should call
 one of the \&"performing" functions of the multi interface
 (\fIcurl_multi_socket_action(3)\fP and \fIcurl_multi_perform(3)\fP) - to allow
 libcurl to keep timeouts and retries etc to work. A timeout value of -1 means
 that there is no timeout at all, and 0 means that the timeout is already
 reached. Libcurl attempts to limit calling this only when the fixed future
-timeout time actually changes. See also \fICURLMOPT_TIMERDATA\fP. This
+timeout time actually changes. See also \fICURLMOPT_TIMERDATA\fP. The callback
+should return 0 on success, and -1 on error. This
 callback can be used instead of, or in addition to,
 \fIcurl_multi_timeout(3)\fP. (Added in 7.16.0)
 .IP CURLMOPT_TIMERDATA
@@ -92,6 +95,112 @@ This option is for the multi handle's use only, when using the easy interface
 you should instead use the \fICURLOPT_MAXCONNECTS\fP option.
 
 (Added in 7.16.3)
+.IP CURLMOPT_MAX_HOST_CONNECTIONS
+Pass a long. The set number will be used as the maximum amount of
+simultaneously open connections to a single host. For each new session to
+a host, libcurl will open a new connection up to the limit set by
+CURLMOPT_MAX_HOST_CONNECTIONS. When the limit is reached, the sessions will
+be pending until there are available connections. If CURLMOPT_PIPELINING is
+1, libcurl will try to pipeline if the host is capable of it.
+
+The default value is 0, which means that there is no limit.
+However, for backwards compatibility, setting it to 0 when CURLMOPT_PIPELINING
+is 1 will not be treated as unlimited. Instead it will open only 1 connection
+and try to pipeline on it.
+
+(Added in 7.30.0)
+.IP CURLMOPT_MAX_PIPELINE_LENGTH
+Pass a long. The set number will be used as the maximum amount of requests
+in a pipelined connection. When this limit is reached, libcurl will use another
+connection to the same host (see CURLMOPT_MAX_HOST_CONNECTIONS), or queue the
+requests until one of the pipelines to the host is ready to accept a request.
+Thus, the total number of requests in-flight is CURLMOPT_MAX_HOST_CONNECTIONS *
+CURLMOPT_MAX_PIPELINE_LENGTH.
+The default value is 5.
+
+(Added in 7.30.0)
+.IP CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE
+Pass a long. If a pipelined connection is currently processing a request
+with a Content-Length larger than CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE, that
+connection will not be considered for additional requests, even if it is
+shorter than CURLMOPT_MAX_PIPELINE_LENGTH.
+The default value is 0, which means that the penalization is inactive.
+
+(Added in 7.30.0)
+.IP CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE
+Pass a long. If a pipelined connection is currently processing a
+chunked (Transfer-encoding: chunked) request with a current chunk length
+larger than CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE, that connection will not be
+considered for additional requests, even if it is shorter than
+CURLMOPT_MAX_PIPELINE_LENGTH.
+The default value is 0, which means that the penalization is inactive.
+
+(Added in 7.30.0)
+.IP CURLMOPT_PIPELINING_SITE_BL
+Pass an array of char *, ending with NULL. This is a list of sites that are
+blacklisted from pipelining, i.e sites that are known to not support HTTP
+pipelining. The array is copied by libcurl.
+
+The default value is NULL, which means that there is no blacklist.
+
+Pass a NULL pointer to clear the blacklist.
+
+Example:
+
+.nf
+  site_blacklist[] =
+  {
+    "www.haxx.se",
+    "www.example.com:1234",
+    NULL
+  };
+
+  curl_multi_setopt(m, CURLMOPT_PIPELINE_SITE_BL, site_blacklist);
+.fi
+
+(Added in 7.30.0)
+.IP CURLMOPT_PIPELINING_SERVER_BL
+Pass an array of char *, ending with NULL. This is a list of server types
+prefixes (in the Server: HTTP header) that are blacklisted from pipelining,
+i.e server types that are known to not support HTTP pipelining. The array is
+copied by libcurl.
+
+Note that the comparison matches if the Server: header begins with the string
+in the blacklist, i.e "Server: Ninja 1.2.3" and "Server: Ninja 1.4.0" can 
+both be blacklisted by having "Ninja" in the backlist.
+
+The default value is NULL, which means that there is no blacklist.
+
+Pass a NULL pointer to clear the blacklist.
+
+Example:
+
+.nf
+  server_blacklist[] =
+  {
+    "Microsoft-IIS/6.0",
+    "nginx/0.8.54",
+    NULL
+  };
+
+  curl_multi_setopt(m, CURLMOPT_PIPELINE_SERVER_BL, server_blacklist);
+.fi
+
+(Added in 7.30.0)
+.IP CURLMOPT_MAX_TOTAL_CONNECTIONS
+Pass a long. The set number will be used as the maximum amount of
+simultaneously open connections in total. For each new session, libcurl
+will open a new connection up to the limit set by
+CURLMOPT_MAX_TOTAL_CONNECTIONS. When the limit is reached, the sessions will
+be pending until there are available connections. If CURLMOPT_PIPELINING is
+1, libcurl will try to pipeline if the host is capable of it.
+
+The default value is 0, which means that there is no limit.
+However, for backwards compatibility, setting it to 0 when CURLMOPT_PIPELINING
+is 1 will not be treated as unlimited. Instead it will open only 1 connection
+and try to pipeline on it.
+
+(Added in 7.30.0)
 .SH RETURNS
 The standard CURLMcode for multi interface error codes. Note that it returns a
 CURLM_UNKNOWN_OPTION if you try setting an option that this version of libcurl

docs/libcurl/curl_multi_socket_action.3

@@ -38,7 +38,9 @@ can be passed as an events bitmask \fBev_bitmask\fP by first setting
 \fBev_bitmask\fP to 0, and then adding using bitwise OR (|) any combination of
 events to be chosen from CURL_CSELECT_IN, CURL_CSELECT_OUT or
 CURL_CSELECT_ERR. When the events on a socket are unknown, pass 0 instead, and
-libcurl will test the descriptor internally.
+libcurl will test the descriptor internally. It is also permissible to pass
+CURL_SOCKET_TIMEOUT to the \fBsockfd\fP parameter in order to initiate the
+whole process or when a timeout occurs.
 
 At return, the integer \fBrunning_handles\fP points to will contain the number
 of running easy handles within the multi handle. When this number reaches
@@ -71,7 +73,10 @@ The socket \fBcallback\fP function uses a prototype like this
                            curl_socket_t s, /* socket */
                            int action,      /* see values below */
                            void *userp,    /* private callback pointer */
-                           void *socketp); /* private socket pointer */
+                           void *socketp); /* private socket pointer,
+                                              \fBNULL\fP if not
+                                              previously assigned with
+                                              \fBcurl_multi_assign(3)\fP */
 
 .fi
 The callback MUST return 0.
@@ -132,15 +137,15 @@ timeout value to use when waiting for socket activities.
 them for activity. This can be done through your application code, or by way
 of an external library such as libevent or glib.
 
-6. Call curl_multi_socket_action(...CURL_SOCKET_TIMEOUT...) to kickstart
-everything. To get one or more callbacks called.
+6. Call curl_multi_socket_action(..., CURL_SOCKET_TIMEOUT, 0, ...)
+to kickstart everything. To get one or more callbacks called.
 
 7. Wait for activity on any of libcurl's sockets, use the timeout value your
-callback has been told
+callback has been told.
 
 8, When activity is detected, call curl_multi_socket_action() for the
 socket(s) that got action. If no activity is detected and the timeout expires,
-call \fIcurl_multi_socket_action(3)\fP with \fICURL_SOCKET_TIMEOUT\fP
+call \fIcurl_multi_socket_action(3)\fP with \fICURL_SOCKET_TIMEOUT\fP.
 .SH AVAILABILITY
 This function was added in libcurl 7.15.4, and is deemed stable since 7.16.0.
 .SH "SEE ALSO"

docs/libcurl/curl_multi_timeout.3

@@ -42,7 +42,7 @@ of milliseconds at this very moment. If 0, it means you should proceed
 immediately without waiting for anything. If it returns -1, there's no timeout
 at all set.
 
-An application that uses the multi_socket API SHOULD not use this function, but
+An application that uses the multi_socket API SHOULD NOT use this function, but
 SHOULD instead use \fIcurl_multi_setopt(3)\fP and its
 \fPCURLMOPT_TIMERFUNCTION\fP option for proper and desired behavior.
 

docs/libcurl/curl_multi_wait.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -36,12 +36,17 @@ CURLMcode curl_multi_wait(CURLM *multi_handle,
 This function polls on all file descriptors used by the curl easy handles
 contained in the given multi handle set.  It will block until activity is
 detected on at least one of the handles or \fItimeout_ms\fP has passed.
+Alternatively, if the multi handle has a pending internal timeout that has a
+shorter expiry time than \fItimeout_ms\fP, that shorter time will be used
+instead to make sure timeout accuracy is reasonably kept.
 
 The calling application may pass additional curl_waitfd structures which are
 similar to \fIpoll(2)\fP's pollfd structure to be waited on in the same call.
 
 On completion, if \fInumfds\fP is supplied, it will be populated with the
-number of file descriptors on which interesting events occured.
+total number of file descriptors on which interesting events occured. This
+number can include both libcurl internal descriptors as well as descriptors
+provided in \fIextra_fds\fP.
 
 If no extra file descriptors are provided and libcurl has no file descriptor
 to offer to wait for, this function will return immediately.

docs/libcurl/curl_version.3

@@ -31,6 +31,7 @@ curl_version - returns the libcurl version string
 Returns a human readable string with the version number of libcurl and some of
 its important components (like OpenSSL version).
 .SH RETURN VALUE
-A pointer to a zero terminated string.
+A pointer to a zero terminated string. The string resides in a statically
+allocated buffer and must not be freed by the caller.
 .SH "SEE ALSO"
 .BR curl_version_info "(3)"

docs/libcurl/index.html

@@ -21,40 +21,49 @@
 <H2>Library Functions (A-Z)</H2>
 <a href="curl_easy_cleanup.html">curl_easy_cleanup</A>
 <br><a href="curl_easy_duphandle.html">curl_easy_duphandle</A>
+<br><a href="curl_easy_escape.html">curl_easy_escape</A>
 <br><a href="curl_easy_getinfo.html">curl_easy_getinfo</A>
 <br><a href="curl_easy_init.html">curl_easy_init</A>
+<br><a href="curl_easy_pause.html">curl_easy_pause</A>
 <br><a href="curl_easy_perform.html">curl_easy_perform</A>
 <br><a href="curl_easy_recv.html">curl_easy_recv</A>
 <br><a href="curl_easy_reset.html">curl_easy_reset</A>
 <br><a href="curl_easy_send.html">curl_easy_send</A>
 <br><a href="curl_easy_setopt.html">curl_easy_setopt</A>
 <br><a href="curl_easy_strerror.html">curl_easy_strerror</A>
-<br><a href="curl_escape.html">curl_escape</A>
+<br><a href="curl_easy_unescape.html">curl_easy_unescape</A>
+<br><a href="curl_escape.html">curl_escape</A> (deprecated)
 <br><a href="curl_formadd.html">curl_formadd</A>
 <br><a href="curl_formfree.html">curl_formfree</A>
+<br><a href="curl_formget.html">curl_formget</A>
 <br><a href="curl_free.html">curl_free</A>
 <br><a href="curl_getdate.html">curl_getdate</A>
-<br><a href="curl_getenv.html">curl_getenv</A>
+<br><a href="curl_getenv.html">curl_getenv</A> (deprecated)
 <br><a href="curl_global_cleanup.html">curl_global_cleanup</A>
 <br><a href="curl_global_init.html">curl_global_init</A>
 <br><a href="curl_global_init_mem.html">curl_global_init_mem</A>
-<br><a href="curl_mprintf.html">curl_mprintf</A>
+<br><a href="curl_mprintf.html">curl_mprintf</A> (deprecated)
 <br><a href="curl_multi_add_handle.html">curl_multi_add_handle</a>
+<br><a href="curl_multi_assign.html">curl_multi_assign</a>
 <br><a href="curl_multi_cleanup.html">curl_multi_cleanup</a>
 <br><a href="curl_multi_fdset.html">curl_multi_fdset</a>
 <br><a href="curl_multi_info_read.html">curl_multi_info_read</a>
 <br><a href="curl_multi_init.html">curl_multi_init</a>
 <br><a href="curl_multi_perform.html">curl_multi_perform</a>
 <br><a href="curl_multi_remove_handle.html">curl_multi_remove_handle</a>
-<br><a href="curl_multi_strerror.html">curl_multi_strerror.html</a>
+<br><a href="curl_multi_setopt.html">curl_multi_setopt</a>
+<br><a href="curl_multi_socket.html">curl_multi_socket</a> (deprecated)
+<br><a href="curl_multi_socket_action.html">curl_multi_socket_action</a>
+<br><a href="curl_multi_strerror.html">curl_multi_strerror</a>
+<br><a href="curl_multi_timeout.html">curl_multi_timeout</a> (deprecated)
 <br><a href="curl_share_cleanup.html">curl_share_cleanup</A>
 <br><a href="curl_share_init.html">curl_share_init</A>
 <br><a href="curl_share_setopt.html">curl_share_setopt</A>
-<br><a href="curl_share_strerror.html">curl_share_strerror.html</a>
+<br><a href="curl_share_strerror.html">curl_share_strerror</a>
 <br><a href="curl_slist_append.html">curl_slist_append</A>
 <br><a href="curl_slist_free_all.html">curl_slist_free_all</A>
 <br><a href="curl_strequal.html">curl_strequal and curl_strnequal</A>
-<br><a href="curl_unescape.html">curl_unescape</A>
+<br><a href="curl_unescape.html">curl_unescape</A> (deprecated)
 <br><a href="curl_version.html">curl_version</A>
 <br><a href="curl_version_info.html">curl_version_info</A>
 

docs/libcurl/libcurl-errors.3

@@ -240,6 +240,9 @@ Mismatch of RTSP Session Identifiers.
 Unable to parse FTP file list (during FTP wildcard downloading).
 .IP "CURLE_CHUNK_FAILED (88)"
 Chunk callback reported error.
+.IP "CURLE_NO_CONNECTION_AVAILABLE (89)"
+(For internal use only, will never be returned by libcurl) No connection
+available, the session will be queued. (added in 7.30.0)
 .IP "CURLE_OBSOLETE*"
 These error codes will never be returned. They were used in an old libcurl
 version and are currently unused.

docs/libcurl/libcurl-share.3

@@ -34,8 +34,10 @@ The share interface was added to enable sharing of data between curl
 \&"handles".
 .SH "ONE SET OF DATA - MANY TRANSFERS"
 You can have multiple easy handles share data between them. Have them update
-and use the \fBsame\fP cookie database or DNS cache! This way, each single
-transfer will take advantage from data updates made by the other transfer(s).
+and use the \fBsame\fP cookie database, DNS cache, TLS session cache! This
+way, each single transfer will take advantage from data updates made by the
+other transfer(s). The sharing interface, however, does not share active or
+persistent connections between different easy handles.
 .SH "SHARE OBJECT"
 You create a shared object with \fIcurl_share_init(3)\fP. It returns a handle
 for a newly created one.

docs/libcurl/libcurl-tutorial.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -289,6 +289,10 @@ axTLS
 
  Required actions unknown.
 
+Secure Transport
+
+ The engine is fully thread-safe, and no additional steps are required.
+
 When using multiple threads you should set the CURLOPT_NOSIGNAL option to 1
 for all handles. Everything will or might work fine except that timeouts are
 not honored during the DNS lookup - which you can work around by building
@@ -1153,13 +1157,13 @@ and install a CURLOPT_OPENSOCKETFUNCTION callback function in which addresses
 are sanitized before use.
 
 .IP "Private Resources"
-A user who can control the DNS server of a domain being passed in within
-a URL can change the address of the host to a local, private address
-which the libcurl application will then use. e.g. The innocuous URL
-http://fuzzybunnies.example.com/ could actually resolve to the IP address
-of a server behind a firewall, such as 127.0.0.1 or 10.1.2.3
-Apps can mitigate against this by setting a CURLOPT_OPENSOCKETFUNCTION
-and checking the address before a connection.
+A user who can control the DNS server of a domain being passed in within a URL
+can change the address of the host to a local, private address which a
+server-side libcurl-using application could then use. e.g. the innocuous URL
+http://fuzzybunnies.example.com/ could actually resolve to the IP address of a
+server behind a firewall, such as 127.0.0.1 or 10.1.2.3.  Apps can mitigate
+against this by setting a CURLOPT_OPENSOCKETFUNCTION and checking the address
+before a connection.
 
 All the malicious scenarios regarding redirected URLs apply just as well
 to non-redirected URLs, if the user is allowed to specify an arbitrary URL
@@ -1174,6 +1178,19 @@ IP address and port number for a server local to the app running libcurl
 but behind a firewall.  Apps can mitigate against this by using the
 CURLOPT_FTP_SKIP_PASV_IP option or CURLOPT_FTPPORT.
 
+.IP "IPv6 Addresses"
+libcurl will normally handle IPv6 addresses transparently and just as easily
+as IPv4 addresses. That means that a sanitizing function that filters out
+addressses like 127.0.0.1 isn't sufficient--the equivalent IPv6 addresses ::1,
+::, 0:00::0:1, ::127.0.0.1 and ::ffff:7f00:1 supplied somehow by an attacker
+would all bypass a naive filter and could allow access to undesired local
+resources.  IPv6 also has special address blocks like link-local and site-local
+that generally shouldn't be accessed by a server-side libcurl-using
+application.  A poorly-configured firewall installed in a data center,
+organization or server may also be configured to limit IPv4 connections but
+leave IPv6 connections wide open.  In some cases, the CURL_IPRESOLVE_V4 option
+can be used to limit resolved addresses to IPv4 only and bypass these issues.
+
 .IP Uploads
 When uploading, a redirect can cause a local (or remote) file to be
 overwritten.  Apps must not allow any unsanitized URL to be passed in
@@ -1246,7 +1263,7 @@ using the Content-disposition: header to generate a file name.  An application
 could also use CURLINFO_EFFECTIVE_URL to generate a file name from a
 server-supplied redirect URL. Special care must be taken to sanitize such
 names to avoid the possibility of a malicious server supplying one like
-"/etc/passwd", "\autoexec.bat" or even ".bashrc".
+"/etc/passwd", "\\autoexec.bat", "prn:" or even ".bashrc".
 
 .IP "Server Certificates"
 A secure application should never use the CURLOPT_SSL_VERIFYPEER option to
@@ -1259,10 +1276,15 @@ validated certificates is potentially as insecure as a plain HTTP connection.
 On a related issue, be aware that even in situations like when you have
 problems with libcurl and ask someone for help, everything you reveal in order
 to get best possible help might also impose certain security related
-risks. Host names, user names, paths, operating system specifics, etc (not to
+risks. Host names, user names, paths, operating system specifics, etc. (not to
 mention passwords of course) may in fact be used by intruders to gain
 additional information of a potential target.
 
+Be sure to limit access to application logs if they could hold private or
+security-related data.  Besides the obvious candidates like user names and
+passwords, things like URLs, cookies or even file names could also hold
+sensitive data.
+
 To avoid this problem, you must of course use your common sense. Often, you
 can just edit out the sensitive data or just search/replace your true
 information with faked data.
@@ -1343,10 +1365,10 @@ automatically share a lot of the data that otherwise would be kept on a
 per-easy handle basis when the easy interface is used.
 
 The DNS cache is shared between handles within a multi handle, making
-subsequent name resolvings faster and the connection pool that is kept to
-better allow persistent connections and connection re-use is shared. If you're
-using the easy interface, you can still share these between specific easy
-handles by using the share interface, see \fIlibcurl-share(3)\fP.
+subsequent name resolving faster, and the connection pool that is kept to
+better allow persistent connections and connection re-use is also shared. If
+you're using the easy interface, you can still share these between specific
+easy handles by using the share interface, see \fIlibcurl-share(3)\fP.
 
 Some things are never shared automatically, not within multi handles, like for
 example cookies so the only way to share that is with the share interface.

docs/libcurl/symbols-in-versions

@@ -85,6 +85,7 @@ CURLE_LDAP_SEARCH_FAILED        7.1
 CURLE_LIBRARY_NOT_FOUND         7.1           7.17.0
 CURLE_LOGIN_DENIED              7.13.1
 CURLE_MALFORMAT_USER            7.1           7.17.0
+CURLE_NO_CONNECTION_AVAILABLE   7.30.0
 CURLE_NOT_BUILT_IN              7.21.5
 CURLE_OK                        7.1
 CURLE_OPERATION_TIMEDOUT        7.10.2
@@ -267,8 +268,15 @@ CURLKHTYPE_DSS                  7.19.6
 CURLKHTYPE_RSA                  7.19.6
 CURLKHTYPE_RSA1                 7.19.6
 CURLKHTYPE_UNKNOWN              7.19.6
+CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE 7.30.0
+CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE 7.30.0
+CURLMOPT_MAX_HOST_CONNECTIONS   7.30.0
+CURLMOPT_MAX_PIPELINE_LENGTH    7.30.0
+CURLMOPT_MAX_TOTAL_CONNECTIONS  7.30.0
 CURLMOPT_MAXCONNECTS            7.16.3
 CURLMOPT_PIPELINING             7.16.0
+CURLMOPT_PIPELINING_SERVER_BL   7.30.0
+CURLMOPT_PIPELINING_SITE_BL     7.30.0
 CURLMOPT_SOCKETDATA             7.15.4
 CURLMOPT_SOCKETFUNCTION         7.15.4
 CURLMOPT_TIMERDATA              7.16.0
@@ -420,7 +428,7 @@ CURLOPT_POSTREDIR               7.19.1
 CURLOPT_PREQUOTE                7.9.5
 CURLOPT_PRIVATE                 7.10.3
 CURLOPT_PROGRESSDATA            7.1
-CURLOPT_PROGRESSFUNCTION        7.1
+CURLOPT_PROGRESSFUNCTION        7.1           7.32.0
 CURLOPT_PROTOCOLS               7.19.4
 CURLOPT_PROXY                   7.1
 CURLOPT_PROXYAUTH               7.10.7
@@ -448,6 +456,7 @@ CURLOPT_RTSP_SERVER_CSEQ        7.20.0
 CURLOPT_RTSP_SESSION_ID         7.20.0
 CURLOPT_RTSP_STREAM_URI         7.20.0
 CURLOPT_RTSP_TRANSPORT          7.20.0
+CURLOPT_SASL_IR                 7.31.0
 CURLOPT_SEEKDATA                7.18.0
 CURLOPT_SEEKFUNCTION            7.18.0
 CURLOPT_SERVER_RESPONSE_TIMEOUT 7.20.0
@@ -516,6 +525,8 @@ CURLOPT_WRITEDATA               7.9.7
 CURLOPT_WRITEFUNCTION           7.1
 CURLOPT_WRITEHEADER             7.1
 CURLOPT_WRITEINFO               7.1
+CURLOPT_XFERINFODATA            7.32.0
+CURLOPT_XFERINFOFUNCTION        7.32.0
 CURLPAUSE_ALL                   7.18.0
 CURLPAUSE_CONT                  7.18.0
 CURLPAUSE_RECV                  7.18.0
@@ -614,6 +625,7 @@ CURL_GLOBAL_DEFAULT             7.8
 CURL_GLOBAL_NOTHING             7.8
 CURL_GLOBAL_SSL                 7.8
 CURL_GLOBAL_WIN32               7.8.1
+CURL_GLOBAL_ACK_EINTR           7.30.0
 CURL_HTTP_VERSION_1_0           7.9.1
 CURL_HTTP_VERSION_1_1           7.9.1
 CURL_HTTP_VERSION_NONE          7.9.1

docs/mk-ca-bundle.1

@@ -60,11 +60,16 @@ unlink (remove) certdata.txt after processing
 be verbose and print out processed CAs
 .SH EXIT STATUS
 Returns 0 on success. Returns 1 if it fails to download data.
+.SH CERTDATA FORMAT
+The file format used by Mozilla for this trust information seems to be documented here:
+.nf
+http://p11-glue.freedesktop.org/doc/storing-trust-policy/storing-trust-existing.html
+.fi
 .SH SEE ALSO
 .BR curl (1)
 .SH HISTORY
 \fBmk-ca-bundle\fP is a command line tool that is shipped as part of every
 curl and libcurl release (see http://curl.haxx.se/). It was originally based
 on the parse-certs script written by Roland Krikava and was later much
-improved by Guenter Knauf.  This manual page was written by Jan Schaumann
-\&<jschauma@netmeister.org>.
+improved by Guenter Knauf.  This manual page was initially written by Jan
+Schaumann \&<jschauma@netmeister.org>.

include/curl/curl.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -93,29 +93,21 @@ extern "C" {
 typedef void CURL;
 
 /*
- * Decorate exportable functions for Win32 and Symbian OS DLL linking.
- * This avoids using a .def file for building libcurl.dll.
+ * libcurl external API function linkage decorations.
  */
-#if (defined(WIN32) || defined(_WIN32) || defined(__SYMBIAN32__)) && \
-     !defined(CURL_STATICLIB)
-#if defined(BUILDING_LIBCURL)
-#define CURL_EXTERN  __declspec(dllexport)
-#else
-#define CURL_EXTERN  __declspec(dllimport)
-#endif
-#else
 
-#ifdef CURL_HIDDEN_SYMBOLS
-/*
- * This definition is used to make external definitions visible in the
- * shared library when symbols are hidden by default.  It makes no
- * difference when compiling applications whether this is set or not,
- * only when compiling the library.
- */
-#define CURL_EXTERN CURL_EXTERN_SYMBOL
+#ifdef CURL_STATICLIB
+#  define CURL_EXTERN
+#elif defined(WIN32) || defined(_WIN32) || defined(__SYMBIAN32__)
+#  if defined(BUILDING_LIBCURL)
+#    define CURL_EXTERN  __declspec(dllexport)
+#  else
+#    define CURL_EXTERN  __declspec(dllimport)
+#  endif
+#elif defined(BUILDING_LIBCURL) && defined(CURL_HIDDEN_SYMBOLS)
+#  define CURL_EXTERN CURL_EXTERN_SYMBOL
 #else
-#define CURL_EXTERN
-#endif
+#  define CURL_EXTERN
 #endif
 
 #ifndef curl_socket_typedef
@@ -164,12 +156,22 @@ struct curl_httppost {
                                        HTTPPOST_CALLBACK posts */
 };
 
+/* This is the CURLOPT_PROGRESSFUNCTION callback proto. It is now considered
+   deprecated but was the only choice up until 7.31.0 */
 typedef int (*curl_progress_callback)(void *clientp,
                                       double dltotal,
                                       double dlnow,
                                       double ultotal,
                                       double ulnow);
 
+/* This is the CURLOPT_XFERINFOFUNCTION callback proto. It was introduced in
+   7.32.0, it avoids floating point and provides more detailed information. */
+typedef int (*curl_xferinfo_callback)(void *clientp,
+                                      curl_off_t dltotal,
+                                      curl_off_t dlnow,
+                                      curl_off_t ultotal,
+                                      curl_off_t ulnow);
+
 #ifndef CURL_MAX_WRITE_SIZE
   /* Tests have proven that 20K is a very bad buffer size for uploads on
      Windows, while 16K for some odd reason performed a lot better.
@@ -515,6 +517,8 @@ typedef enum {
   CURLE_RTSP_SESSION_ERROR,      /* 86 - mismatch of RTSP Session Ids */
   CURLE_FTP_BAD_FILE_LIST,       /* 87 - unable to parse FTP file list */
   CURLE_CHUNK_FAILED,            /* 88 - chunk callback reported error */
+  CURLE_NO_CONNECTION_AVAILABLE, /* 89 - No connection available, the
+                                    session will be queued */
   CURL_LAST /* never use! */
 } CURLcode;
 
@@ -974,13 +978,16 @@ typedef enum {
 
   /* 55 = OBSOLETE */
 
-  /* Function that will be called instead of the internal progress display
+  /* DEPRECATED
+   * Function that will be called instead of the internal progress display
    * function. This function should be defined as the curl_progress_callback
    * prototype defines. */
   CINIT(PROGRESSFUNCTION, FUNCTIONPOINT, 56),
 
-  /* Data passed to the progress callback */
+  /* Data passed to the CURLOPT_PROGRESSFUNCTION and CURLOPT_XFERINFOFUNCTION
+     callbacks */
   CINIT(PROGRESSDATA, OBJECTPOINT, 57),
+#define CURLOPT_XFERINFODATA CURLOPT_PROGRESSDATA
 
   /* We want the referrer field set automatically when following locations */
   CINIT(AUTOREFERER, LONG, 58),
@@ -1533,9 +1540,17 @@ typedef enum {
   /* Enable/disable specific SSL features with a bitmask, see CURLSSLOPT_* */
   CINIT(SSL_OPTIONS, LONG, 216),
 
-  /* set the SMTP auth originator */
+  /* Set the SMTP auth originator */
   CINIT(MAIL_AUTH, OBJECTPOINT, 217),
 
+  /* Enable/disable SASL initial response */
+  CINIT(SASL_IR, LONG, 218),
+
+  /* Function that will be called instead of the internal progress display
+   * function. This function should be defined as the curl_xferinfo_callback
+   * prototype defines. (Deprecates CURLOPT_PROGRESSFUNCTION) */
+  CINIT(XFERINFOFUNCTION, FUNCTIONPOINT, 219),
+
   CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
@@ -2023,6 +2038,7 @@ typedef enum {
 #define CURL_GLOBAL_ALL (CURL_GLOBAL_SSL|CURL_GLOBAL_WIN32)
 #define CURL_GLOBAL_NOTHING 0
 #define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL
+#define CURL_GLOBAL_ACK_EINTR (1<<2)
 
 
 /*****************************************************************************

include/curl/curlbuild.h.dist

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -527,7 +527,8 @@
 /* ===================================== */
 
 #elif defined(__GNUC__)
-#  if defined(__i386__) || defined(__ppc__)
+#  if defined(__ILP32__) || \
+      defined(__i386__) || defined(__ppc__) || defined(__arm__)
 #    define CURL_SIZEOF_LONG           4
 #    define CURL_TYPEOF_CURL_OFF_T     long long
 #    define CURL_FORMAT_CURL_OFF_T     "lld"
@@ -536,7 +537,8 @@
 #    define CURL_SIZEOF_CURL_OFF_T     8
 #    define CURL_SUFFIX_CURL_OFF_T     LL
 #    define CURL_SUFFIX_CURL_OFF_TU    ULL
-#  elif defined(__x86_64__) || defined(__ppc64__)
+#  elif defined(__LP64__) || \
+        defined(__x86_64__) || defined(__ppc64__)
 #    define CURL_SIZEOF_LONG           8
 #    define CURL_TYPEOF_CURL_OFF_T     long
 #    define CURL_FORMAT_CURL_OFF_T     "ld"

include/curl/curlver.h

@@ -30,13 +30,13 @@
 
 /* This is the version number of the libcurl package from which this header
    file origins: */
-#define LIBCURL_VERSION "7.28.2-DEV"
+#define LIBCURL_VERSION "7.32.0-DEV"
 
 /* The numeric version number is also available "in parts" by using these
    defines: */
 #define LIBCURL_VERSION_MAJOR 7
-#define LIBCURL_VERSION_MINOR 28
-#define LIBCURL_VERSION_PATCH 2
+#define LIBCURL_VERSION_MINOR 32
+#define LIBCURL_VERSION_PATCH 0
 
 /* This is the numeric version of the libcurl version number, meant for easier
    parsing and comparions by programs. The LIBCURL_VERSION_NUM define will
@@ -53,7 +53,7 @@
    and it is always a greater number in a more recent release. It makes
    comparisons with greater than and less than work.
 */
-#define LIBCURL_VERSION_NUM 0x071c02
+#define LIBCURL_VERSION_NUM 0x072000
 
 /*
  * This is the date and time when the full source package was created. The

include/curl/mprintf.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2006, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -58,7 +58,7 @@ CURL_EXTERN char *curl_mvaprintf(const char *format, va_list args);
 # define printf curl_mprintf
 # define fprintf curl_mfprintf
 #ifdef CURLDEBUG
-/* When built with CURLDEBUG we define away the sprintf() functions since we
+/* When built with CURLDEBUG we define away the sprintf functions since we
    don't want internal code to be using them */
 # define sprintf sprintf_was_used
 # define vsprintf vsprintf_was_used

include/curl/multi.h

@@ -338,6 +338,31 @@ typedef enum {
   /* maximum number of entries in the connection cache */
   CINIT(MAXCONNECTS, LONG, 6),
 
+  /* maximum number of (pipelining) connections to one host */
+  CINIT(MAX_HOST_CONNECTIONS, LONG, 7),
+
+  /* maximum number of requests in a pipeline */
+  CINIT(MAX_PIPELINE_LENGTH, LONG, 8),
+
+  /* a connection with a content-length longer than this
+     will not be considered for pipelining */
+  CINIT(CONTENT_LENGTH_PENALTY_SIZE, OFF_T, 9),
+
+  /* a connection with a chunk length longer than this
+     will not be considered for pipelining */
+  CINIT(CHUNK_LENGTH_PENALTY_SIZE, OFF_T, 10),
+
+  /* a list of site names(+port) that are blacklisted from
+     pipelining */
+  CINIT(PIPELINING_SITE_BL, OBJECTPOINT, 11),
+
+  /* a list of server types that are blacklisted from
+     pipelining */
+  CINIT(PIPELINING_SERVER_BL, OBJECTPOINT, 12),
+
+  /* maximum number of open connections in total */
+  CINIT(MAX_TOTAL_CONNECTIONS, LONG, 13),
+
   CURLMOPT_LASTENTRY /* the last unused */
 } CURLMoption;
 

install-sh

@@ -1,250 +1,527 @@
 #!/bin/sh
-#
 # install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
+
+scriptversion=2011-01-19.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
 #
-# Copyright 1991 by the Massachusetts Institute of Technology
+# Copyright (C) 1994 X Consortium
 #
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
 # `make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
 
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
 
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
 
-# put in absolute paths if you don't have them in your path; or use env. vars.
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
 
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
+stripcmd=
 
-while [ x"$1" != x ]; do
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
   case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
+    -c) ;;
 
-	-d) dir_arg=true
-	    shift
-	    continue;;
+    -C) copy_on_change=true;;
 
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
+	shift;;
 
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
+    --help) echo "$usage"; exit $?;;
 
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
 	esac
-done
+	shift;;
 
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
+    -o) chowncmd="$chownprog $2"
+	shift;;
 
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
+    -s) stripcmd=$stripprog;;
 
-	if [ -d $dst ]; then
-		instcmd=:
-	else
-		instcmd=mkdir
-	fi
-else
+    -t) dst_arg=$2
+	# Protect names problematic for `test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
+	shift;;
 
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
+    -T) no_target_directory=true;;
 
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
+    --version) echo "$0 $scriptversion"; exit $?;;
 
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
+    --)	shift
+	break;;
 
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
 
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
+    *)  break;;
+  esac
   shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
 done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for `test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
 fi
 
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
 
-# If we're going to rename the final executable, determine the name now.
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
 
-	if [ x"$transformarg" = x ]
-	then
-		dstfile=`basename $dst`
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
       else
-		dstfile=`basename $dst $transformbasename |
-			sed $transformarg`$transformbasename
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for `test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
     fi
 
-# don't allow the sed command to completely eliminate the filename
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
 
-	if [ x"$dstfile" = x ]
-	then
-		dstfile=`basename $dst`
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
     else
-		true
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
   fi
 
-# Make a temp file name in the proper directory.
+  obsolete_mkdir_used=false
 
-	dsttmp=$dstdir/#inst.$$#
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
 
-# Move or copy the file name to the temp name
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
 
-	$doit $instcmd $src $dsttmp &&
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
 
-	trap "rm -f ${dsttmp}" 0 &&
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
 
-# and set any options; do chmod last to preserve setuid bits
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
 
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
 
-# Now rename the file to the real destination.
+      case $dstdir in
+	/*) prefix='/';;
+	[-=\(\)!]*) prefix='./';;
+	*)  prefix='';;
+      esac
 
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile
+      eval "$initialize_posix_glob"
 
-fi &&
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
 
+      prefixes=
 
-exit 0
+      for d
+      do
+	test X"$d" = X && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

lib/.gitignore

@@ -7,8 +7,6 @@ TAGS
 Makefile.vc8.dist
 Makefile.vc9.dist
 libcurl.plist.dist
-libcurl.vcproj
-vc6libcurl.dsp
 Makefile.vc10.dist
 libcurl.vers
 *.a

lib/CMakeLists.txt

@@ -94,6 +94,10 @@ add_library(
   ${HHEADERS} ${CSOURCES}
   )
 
+if(MSVC AND CURL_STATICLIB)
+  set_target_properties(${LIB_NAME} PROPERTIES STATIC_LIBRARY_FLAGS ${CMAKE_EXE_LINKER_FLAGS})
+endif()
+
 target_link_libraries(${LIB_NAME} ${CURL_LIBS})
 
 if(WIN32)
@@ -108,14 +112,6 @@ setup_curl_dependencies(${LIB_NAME})
 set_target_properties(${LIB_NAME} PROPERTIES PREFIX "")
 set_target_properties(${LIB_NAME} PROPERTIES IMPORT_PREFIX "")
 
-if(MSVC)
-  if(NOT BUILD_RELEASE_DEBUG_DIRS)
-    # Ugly workaround to remove the "/debug" or "/release" in each output
-    set_target_properties(${LIB_NAME} PROPERTIES PREFIX "../")
-    set_target_properties(${LIB_NAME} PROPERTIES IMPORT_PREFIX "../")
-  endif()
-endif()
-
 if(WIN32)
   if(NOT CURL_STATICLIB)
     # Add "_imp" as a suffix before the extension to avoid conflicting with the statically linked "libcurl.lib"

lib/Makefile.Watcom

@@ -83,7 +83,7 @@ CFLAGS += -dWANT_IDN_PROTOTYPES
 !ifdef %zlib_root
 ZLIB_ROOT = $(%zlib_root)
 !else
-ZLIB_ROOT = ..$(DS)..$(DS)zlib-1.2.7
+ZLIB_ROOT = ..$(DS)..$(DS)zlib-1.2.8
 !endif
 
 !ifdef %libssh2_root
@@ -101,7 +101,7 @@ LIBRTMP_ROOT = ..$(DS)..$(DS)rtmpdump-2.3
 !ifdef %openssl_root
 OPENSSL_ROOT = $(%openssl_root)
 !else
-OPENSSL_ROOT = ..$(DS)..$(DS)openssl-0.9.8x
+OPENSSL_ROOT = ..$(DS)..$(DS)openssl-0.9.8y
 !endif
 
 !ifdef %ares_root

lib/Makefile.am

@@ -21,35 +21,32 @@
 ###########################################################################
 AUTOMAKE_OPTIONS = foreign nostdinc
 
-DSP = vc6libcurl.dsp
-VCPROJ = libcurl.vcproj
-
 DOCS = README.encoding README.memoryleak README.ares README.curlx	\
  README.hostip README.multi_socket README.httpauth README.pipelining    \
  README.curl_off_t README.pingpong
 
 CMAKE_DIST = CMakeLists.txt curl_config.h.cmake
 
-EXTRA_DIST = Makefile.b32 Makefile.m32 Makefile.vc6 $(DSP)		\
- vc6libcurl.dsw config-win32.h config-win32ce.h config-riscos.h		\
- config-mac.h curl_config.h.in makefile.dj config-dos.h libcurl.plist	\
- libcurl.rc config-amigaos.h makefile.amiga Makefile.netware nwlib.c	\
- nwos.c msvcproj.head msvcproj.foot config-win32ce.h config-os400.h	\
- setup-os400.h config-symbian.h Makefile.Watcom config-tpf.h $(DOCS)	\
- $(VCPROJ) mk-ca-bundle.pl mk-ca-bundle.vbs firefox-db2pem.sh		\
- $(CMAKE_DIST) config-vxworks.h Makefile.vxworks checksrc.pl		\
+EXTRA_DIST = Makefile.b32 Makefile.m32 Makefile.vc6 config-win32.h	\
+ config-win32ce.h config-riscos.h config-mac.h curl_config.h.in		\
+ makefile.dj config-dos.h libcurl.plist libcurl.rc config-amigaos.h	\
+ makefile.amiga Makefile.netware nwlib.c nwos.c config-win32ce.h	\
+ config-os400.h setup-os400.h config-symbian.h Makefile.Watcom		\
+ config-tpf.h $(DOCS) mk-ca-bundle.pl mk-ca-bundle.vbs $(CMAKE_DIST)	\
+ firefox-db2pem.sh config-vxworks.h Makefile.vxworks checksrc.pl	\
  objnames-test08.sh objnames-test10.sh objnames.inc
 
-CLEANFILES = $(DSP) $(VCPROJ)
-
 lib_LTLIBRARIES = libcurl.la
-LIBCURL_LIBS = @LIBCURL_LIBS@
+
+if BUILD_UNITTESTS
+noinst_LTLIBRARIES = libcurlu.la
+else
+noinst_LTLIBRARIES =
+endif
 
 # This might hold -Werror
 CFLAGS += @CURL_CFLAG_EXTRAS@
 
-CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
-
 # Specify our include paths here, and do it relative to $(top_srcdir) and
 # $(top_builddir), to ensure that these paths which belong to the library
 # being currently built and tested are searched before the library which
@@ -79,15 +76,8 @@ AM_CPPFLAGS = -I$(top_builddir)/include/curl \
               -I$(top_srcdir)/lib
 endif
 
-# Mostly for Windows build targets, when building libcurl library
-if USE_CPPFLAG_BUILDING_LIBCURL
-AM_CPPFLAGS += -DBUILDING_LIBCURL
-endif
-
-# Mostly for Windows build targets, when building static libcurl
-if USE_CPPFLAG_CURL_STATICLIB
-AM_CPPFLAGS += -DCURL_STATICLIB
-endif
+# Prevent LIBS from being used for all link targets
+LIBS = $(BLANK_AT_MAKETIME)
 
 if SONAME_BUMP
 #
@@ -117,43 +107,45 @@ endif
 #
 # For the full guide on libcurl ABI rules, see docs/libcurl/ABI
 
-if NO_UNDEFINED
-# The -no-undefined flag is crucial to build fine on some platforms
-UNDEF = -no-undefined
+AM_CPPFLAGS += -DBUILDING_LIBCURL
+AM_LDFLAGS =
+AM_CFLAGS =
+
+libcurl_la_CPPFLAGS_EXTRA =
+libcurl_la_LDFLAGS_EXTRA =
+libcurl_la_CFLAGS_EXTRA =
+
+if CURL_LT_SHLIB_USE_VERSION_INFO
+libcurl_la_LDFLAGS_EXTRA += $(VERSIONINFO)
 endif
 
-if MIMPURE
-# This is for gcc on Solaris (8+ ?) to avoid "relocations remain against
-# allocatable but non-writable sections" problems.
-MIMPURE = -mimpure-text
+if CURL_LT_SHLIB_USE_NO_UNDEFINED
+libcurl_la_LDFLAGS_EXTRA += -no-undefined
 endif
 
-if VERSIONED_SYMBOLS
-VERSIONED_SYMBOLS = -Wl,--version-script=libcurl.vers
+if CURL_LT_SHLIB_USE_MIMPURE_TEXT
+libcurl_la_LDFLAGS_EXTRA += -mimpure-text
 endif
 
-# Prevent LIBS from being used for all link targets
-LIBS = $(BLANK_AT_MAKETIME)
+if CURL_LT_SHLIB_USE_VERSIONED_SYMBOLS
+libcurl_la_LDFLAGS_EXTRA += -Wl,--version-script=libcurl.vers
+endif
 
-libcurl_la_LDFLAGS = $(UNDEF) $(VERSIONINFO) $(MIMPURE) $(VERSIONED_SYMBOLS) $(LIBCURL_LIBS)
+if USE_CPPFLAG_CURL_STATICLIB
+libcurl_la_CPPFLAGS_EXTRA += -DCURL_STATICLIB
+endif
 
 if DOING_CURL_SYMBOL_HIDING
-libcurl_la_CPPFLAGS = $(AM_CPPFLAGS) -DCURL_HIDDEN_SYMBOLS
-libcurl_la_CFLAGS = $(AM_CFLAGS) $(CFLAG_CURL_SYMBOL_HIDING)
-else
-libcurl_la_CPPFLAGS = $(AM_CPPFLAGS)
-libcurl_la_CFLAGS = $(AM_CFLAGS)
+libcurl_la_CPPFLAGS_EXTRA += -DCURL_HIDDEN_SYMBOLS
+libcurl_la_CFLAGS_EXTRA += $(CFLAG_CURL_SYMBOL_HIDING)
 endif
 
-# unit testing static library built only along with unit tests
-if BUILD_UNITTESTS
-noinst_LTLIBRARIES = libcurlu.la
-else
-noinst_LTLIBRARIES =
-endif
+libcurl_la_CPPFLAGS = $(AM_CPPFLAGS) $(libcurl_la_CPPFLAGS_EXTRA)
+libcurl_la_LDFLAGS = $(AM_LDFLAGS) $(libcurl_la_LDFLAGS_EXTRA) $(LDFLAGS) $(LIBCURL_LIBS)
+libcurl_la_CFLAGS = $(AM_CFLAGS) $(libcurl_la_CFLAGS_EXTRA)
 
-libcurlu_la_CPPFLAGS = $(AM_CPPFLAGS) -DUNITTESTS
-libcurlu_la_LDFLAGS = -static $(LIBCURL_LIBS)
+libcurlu_la_CPPFLAGS = $(AM_CPPFLAGS) -DCURL_STATICLIB -DUNITTESTS
+libcurlu_la_LDFLAGS = $(AM_LDFLAGS) -static $(LIBCURL_LIBS)
 libcurlu_la_CFLAGS = $(AM_CFLAGS)
 
 # Makefile.inc provides the CSOURCES and HHEADERS defines
@@ -162,58 +154,6 @@ include Makefile.inc
 libcurl_la_SOURCES = $(CSOURCES) $(HHEADERS)
 libcurlu_la_SOURCES = $(CSOURCES) $(HHEADERS)
 
-WIN32SOURCES = $(CSOURCES)
-WIN32HEADERS = $(HHEADERS) config-win32.h
-
-DSPOUT = | awk '{printf("%s\r\n", $$0)}' >> $(DSP)
-VCPROJOUT = | awk '{printf("%s\r\n", $$0)}' >> $(VCPROJ)
-
-$(DSP): msvcproj.head msvcproj.foot Makefile.am
-	echo "creating $(DSP)"
-	@(cp $(srcdir)/msvcproj.head $(DSP); \
-	echo "# Begin Group \"Source Files\"" $(DSPOUT); \
-        echo "" $(DSPOUT); \
-        echo "# PROP Default_Filter \"\"" $(DSPOUT); \
-        win32_srcs='$(WIN32SOURCES)'; \
-        sorted_srcs=`for file in $$win32_srcs; do echo $$file; done | sort`; \
-        for file in $$sorted_srcs; do \
-	echo "# Begin Source File" $(DSPOUT); \
-	echo "" $(DSPOUT); \
-	echo "SOURCE=.\\"$$file $(DSPOUT); \
-	echo "# End Source File" $(DSPOUT); \
-	done; \
-	echo "# End Group" $(DSPOUT); \
-	echo "# Begin Group \"Header Files\"" $(DSPOUT); \
-        echo "" $(DSPOUT); \
-        echo "# PROP Default_Filter \"\"" $(DSPOUT); \
-        win32_hdrs='$(WIN32HEADERS)'; \
-        sorted_hdrs=`for file in $$win32_hdrs; do echo $$file; done | sort`; \
-        for file in $$sorted_hdrs; do \
-	echo "# Begin Source File" $(DSPOUT); \
-	echo "" $(DSPOUT); \
-	echo "SOURCE=.\\"$$file $(DSPOUT); \
-	echo "# End Source File" $(DSPOUT); \
-	done; \
-	echo "# End Group" $(DSPOUT); \
-	cat $(srcdir)/msvcproj.foot $(DSPOUT) )
-
-$(VCPROJ): vc8proj.head vc8proj.foot Makefile.am
-	echo "creating $(VCPROJ)"
-	@(cp $(srcdir)/vc8proj.head $(VCPROJ); \
-        win32_srcs='$(WIN32SOURCES)'; \
-        sorted_srcs=`for file in $$win32_srcs; do echo $$file; done | sort`; \
-        for file in $$sorted_srcs; do \
-	echo "<File RelativePath=\""$$file"\"></File>" $(VCPROJOUT); \
-	done; \
-	echo "</Filter><Filter	Name=\"Header Files\">" $(VCPROJOUT); \
-        win32_hdrs='$(WIN32HEADERS)'; \
-        sorted_hdrs=`for file in $$win32_hdrs; do echo $$file; done | sort`; \
-        for file in $$sorted_hdrs; do \
-	echo "<File RelativePath=\""$$file"\"></File>" $(VCPROJOUT); \
-	done; \
-	cat $(srcdir)/vc8proj.foot $(VCPROJOUT) )
-
-
 checksrc:
 	@@PERL@ $(top_srcdir)/lib/checksrc.pl -D$(top_srcdir)/lib $(CSOURCES) $(HHEADERS)
 

lib/Makefile.b32

@@ -22,12 +22,12 @@ BCCDIR = $(MAKEDIR)\..
 
 # Edit the path below to point to the base of your Zlib sources.
 !ifndef ZLIB_PATH
-ZLIB_PATH = ..\..\zlib-1.2.7
+ZLIB_PATH = ..\..\zlib-1.2.8
 !endif
 
 # Edit the path below to point to the base of your OpenSSL package.
 !ifndef OPENSSL_PATH
-OPENSSL_PATH = ..\..\openssl-0.9.8x
+OPENSSL_PATH = ..\..\openssl-0.9.8y
 !endif
 
 # Set libcurl static lib, dll and import lib
@@ -52,7 +52,7 @@ LDFLAGS  = -q -lq -laa -tWD
 SRCDIR   = .
 OBJDIR   = .\BCC_objs
 INCDIRS  = -I.;..\include
-LINKLIB  = $(BCCDIR)\lib\cw32mt.lib
+LINKLIB  = $(BCCDIR)\lib\cw32mt.lib $(BCCDIR)\lib\ws2_32.lib
 DEFINES  = -DNDEBUG -DWIN32 -DBUILDING_LIBCURL
 
 # By default SSPI support is enabled for BCC
@@ -88,8 +88,24 @@ LINKLIB  = $(LINKLIB) $(OPENSSL_PATH)\out32\ssleay32.lib $(OPENSSL_PATH)\out32\l
 # Makefile.inc provides the CSOURCES and HHEADERS defines
 !include Makefile.inc
 
-OBJECTS = $(CSOURCES:.c=.obj)
-PREPROCESSED = $(CSOURCES:.c=.int)
+# Borland's command line librarian program TLIB version 4.5 is not capable
+# of building a library when any of its objects contains an hypen in its
+# name, due to a command line parsing bug. In order to workaround this, we
+# build source files with hyphens in their name as objects with underscores
+# using explicit compilation build rules instead of implicit ones.
+
+NOHYPHEN = $(CSOURCES:-=_)
+
+OBJECTS = $(NOHYPHEN:.c=.obj)
+PREPROCESSED = $(NOHYPHEN:.c=.int)
+
+# Borland's command line compiler (BCC32) version 5.5.1 integrated
+# preprocessor has a bug which results in silently generating wrong
+# definitions for libcurl macros such as CURL_OFF_T_C, on the other
+# hand Borland's command line preprocessor (CPP32) version 5.5.1 does
+# not have the bug and achieves proper results. In order to avoid the
+# silent bug we first preprocess source files and later compile the
+# preprocessed result.
 
 .c.obj:
 	@-$(RM) $(@R).int
@@ -98,6 +114,21 @@ PREPROCESSED = $(CSOURCES:.c=.int)
 
 all:	$(OBJDIR) $(LIBCURL_LIB) $(LIBCURL_DLL)
 
+asyn_ares.obj: asyn-ares.c
+	@-$(RM) $(@R).int
+	$(PP_CMD) $(CC_FLAGS) $(INCDIRS) $(DEFINES) -o$(@R).int $(?)
+	$(CC_CMD) $(CC_FLAGS) -o$(@) $(@R).int
+
+asyn_thread.obj: asyn-thread.c
+	@-$(RM) $(@R).int
+	$(PP_CMD) $(CC_FLAGS) $(INCDIRS) $(DEFINES) -o$(@R).int $(?)
+	$(CC_CMD) $(CC_FLAGS) -o$(@) $(@R).int
+
+non_ascii.obj: non-ascii.c
+	@-$(RM) $(@R).int
+	$(PP_CMD) $(CC_FLAGS) $(INCDIRS) $(DEFINES) -o$(@R).int $(?)
+	$(CC_CMD) $(CC_FLAGS) -o$(@) $(@R).int
+
 clean:
 	cd $(OBJDIR)
 	@-$(RM) $(OBJECTS)
@@ -122,7 +153,10 @@ $(LIBCURL_LIB): $(OBJECTS)
 $(LIBCURL_DLL) $(LIBCURL_IMPLIB): $(OBJECTS) $(LINKLIB)
 	@-$(RM) $(LIBCURL_DLL)
 	@-$(RM) $(LIBCURL_IMPLIB)
-	$(LD) $(LDFLAGS) -e$(LIBCURL_DLL) $**
+	$(LD) $(LDFLAGS) -e$(LIBCURL_DLL) @&&!
+$(**: = ^
+)
+!
 	$(IMPLIB) $(LIBCURL_IMPLIB) $(LIBCURL_DLL)
 
 

lib/Makefile.inc

@@ -13,35 +13,36 @@ CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	\
   netrc.c getinfo.c transfer.c strequal.c easy.c security.c krb4.c	\
   curl_fnmatch.c fileinfo.c ftplistparser.c wildcard.c krb5.c		\
   memdebug.c http_chunks.c strtok.c connect.c llist.c hash.c multi.c	\
-  content_encoding.c share.c http_digest.c md4.c md5.c curl_rand.c	\
+  content_encoding.c share.c http_digest.c md4.c md5.c	\
   http_negotiate.c inet_pton.c strtoofft.c strerror.c amigaos.c		\
   hostasyn.c hostip4.c hostip6.c hostsyn.c inet_ntop.c parsedate.c	\
   select.c gtls.c sslgen.c tftp.c splay.c strdup.c socks.c ssh.c nss.c	\
   qssl.c rawstr.c curl_addrinfo.c socks_gssapi.c socks_sspi.c		\
   curl_sspi.c slist.c nonblock.c curl_memrchr.c imap.c pop3.c smtp.c	\
   pingpong.c rtsp.c curl_threads.c warnless.c hmac.c polarssl.c		\
-  curl_rtmp.c openldap.c curl_gethostname.c gopher.c axtls.c		\
-  idn_win32.c http_negotiate_sspi.c cyassl.c http_proxy.c non-ascii.c	\
-  asyn-ares.c asyn-thread.c curl_gssapi.c curl_ntlm.c curl_ntlm_wb.c	\
-  curl_ntlm_core.c curl_ntlm_msgs.c curl_sasl.c curl_schannel.c	        \
-  curl_multibyte.c curl_darwinssl.c hostcheck.c                         \
-  bundles.c conncache.c
+  polarssl_threadlock.c curl_rtmp.c openldap.c curl_gethostname.c	\
+  gopher.c axtls.c idn_win32.c http_negotiate_sspi.c cyassl.c		\
+  http_proxy.c non-ascii.c asyn-ares.c asyn-thread.c curl_gssapi.c	\
+  curl_ntlm.c curl_ntlm_wb.c curl_ntlm_core.c curl_ntlm_msgs.c		\
+  curl_sasl.c curl_schannel.c curl_multibyte.c curl_darwinssl.c		\
+  hostcheck.c bundles.c conncache.c pipeline.c dotdot.c x509asn1.c      \
+  gskit.c
 
 HHEADERS = arpa_telnet.h netrc.h file.h timeval.h qssl.h hostip.h	\
   progress.h formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h	\
   if2ip.h speedcheck.h urldata.h curl_ldap.h ssluse.h escape.h telnet.h	\
-  getinfo.h strequal.h krb4.h memdebug.h http_chunks.h curl_rand.h	\
+  getinfo.h strequal.h krb4.h memdebug.h http_chunks.h	\
   curl_fnmatch.h wildcard.h fileinfo.h ftplistparser.h strtok.h		\
   connect.h llist.h hash.h content_encoding.h share.h curl_md4.h	\
   curl_md5.h http_digest.h http_negotiate.h inet_pton.h amigaos.h	\
   strtoofft.h strerror.h inet_ntop.h curlx.h curl_memory.h curl_setup.h	\
   transfer.h select.h easyif.h multiif.h parsedate.h sslgen.h gtls.h	\
-  tftp.h sockaddr.h splay.h strdup.h socks.h ssh.h nssg.h		\
-  curl_base64.h rawstr.h curl_addrinfo.h curl_sspi.h slist.h nonblock.h	\
+  tftp.h sockaddr.h splay.h strdup.h socks.h ssh.h nssg.h curl_base64.h	\
+  rawstr.h curl_addrinfo.h curl_sspi.h slist.h nonblock.h		\
   curl_memrchr.h imap.h pop3.h smtp.h pingpong.h rtsp.h curl_threads.h	\
-  warnless.h curl_hmac.h polarssl.h curl_rtmp.h curl_gethostname.h	\
-  gopher.h axtls.h cyassl.h http_proxy.h non-ascii.h asyn.h curl_ntlm.h	\
-  curl_gssapi.h curl_ntlm_wb.h curl_ntlm_core.h curl_ntlm_msgs.h	\
-  curl_sasl.h curl_schannel.h curl_multibyte.h curl_darwinssl.h	        \
-  hostcheck.h bundles.h conncache.h curl_setup_once.h multihandle.h     \
-  setup-vms.h
+  warnless.h curl_hmac.h polarssl.h polarssl_threadlock.h curl_rtmp.h	\
+  curl_gethostname.h gopher.h axtls.h cyassl.h http_proxy.h non-ascii.h	\
+  asyn.h curl_ntlm.h curl_gssapi.h curl_ntlm_wb.h curl_ntlm_core.h	\
+  curl_ntlm_msgs.h curl_sasl.h curl_schannel.h curl_multibyte.h		\
+  curl_darwinssl.h hostcheck.h bundles.h conncache.h curl_setup_once.h	\
+  multihandle.h setup-vms.h pipeline.h dotdot.h x509asn1.h gskit.h

lib/Makefile.m32

@@ -7,18 +7,18 @@
 ## Example: mingw32-make -f Makefile.m32 CFG=-zlib-ssl-sspi-winidn
 ##
 ## Hint: you can also set environment vars to control the build, f.e.:
-## set ZLIB_PATH=c:/zlib-1.2.7
+## set ZLIB_PATH=c:/zlib-1.2.8
 ## set ZLIB=1
 #
 ###########################################################################
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../zlib-1.2.7
+ZLIB_PATH = ../../zlib-1.2.8
 endif
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.8x
+OPENSSL_PATH = ../../openssl-0.9.8y
 endif
 # Edit the path below to point to the base of your LibSSH2 package.
 ifndef LIBSSH2_PATH
@@ -106,6 +106,9 @@ endif
 ifeq ($(findstring -ares,$(CFG)),-ares)
 ARES = 1
 endif
+ifeq ($(findstring -sync,$(CFG)),-sync)
+SYNC = 1
+endif
 ifeq ($(findstring -rtmp,$(CFG)),-rtmp)
 RTMP = 1
 SSL = 1
@@ -151,11 +154,15 @@ endif
 INCLUDES = -I. -I../include
 CFLAGS += -DBUILDING_LIBCURL
 
-ifdef ARES
+ifdef SYNC
+  CFLAGS += -DUSE_SYNC_DNS
+else
+  ifdef ARES
     INCLUDES += -I"$(LIBCARES_PATH)"
-  CFLAGS += -DUSE_ARES
+    CFLAGS += -DUSE_ARES -DCARES_STATICLIB
     DLL_LIBS += -L"$(LIBCARES_PATH)" -lcares
     libcurl_dll_DEPENDENCIES = $(LIBCARES_PATH)/libcares.a
+  endif
 endif
 ifdef RTMP
   INCLUDES += -I"$(LIBRTMP_PATH)"

lib/Makefile.netware

@@ -14,12 +14,12 @@ endif
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../zlib-1.2.7
+ZLIB_PATH = ../../zlib-1.2.8
 endif
 
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.8x
+OPENSSL_PATH = ../../openssl-0.9.8y
 endif
 
 # Edit the path below to point to the base of your LibSSH2 package.

lib/Makefile.vc6

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1999 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1999 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -62,10 +62,10 @@
 # Makefile.msvc.names provides libcurl file names
 # ------------------------------------------------
 
-!INCLUDE ..\Makefile.msvc.names
+!INCLUDE ..\winbuild\Makefile.msvc.names
 
 !IFNDEF OPENSSL_PATH
-OPENSSL_PATH   = ../../openssl-0.9.8x
+OPENSSL_PATH   = ../../openssl-0.9.8y
 !ENDIF
 
 !IFNDEF LIBSSH2_PATH
@@ -73,7 +73,7 @@ LIBSSH2_PATH   = ../../libssh2-1.4.3
 !ENDIF
 
 !IFNDEF ZLIB_PATH
-ZLIB_PATH  = ../../zlib-1.2.7
+ZLIB_PATH  = ../../zlib-1.2.8
 !ENDIF
 
 !IFNDEF MACHINE
@@ -106,6 +106,7 @@ WINDOWS_SDK_PATH = "$(PROGRAMFILES)\Microsoft SDK"
 CCNODBG      = cl.exe /O2 /DNDEBUG
 CCDEBUG      = cl.exe /Od /Gm /Zi /D_DEBUG /GZ
 CFLAGSSSL    = /DUSE_SSLEAY /DUSE_OPENSSL /I "$(OPENSSL_PATH)/inc32" /I "$(OPENSSL_PATH)/inc32/openssl"
+CFLAGSWINSSL = /DUSE_SCHANNEL
 CFLAGSSSH2   = /DUSE_LIBSSH2 /DCURL_DISABLE_LDAP /DHAVE_LIBSSH2 /DHAVE_LIBSSH2_H /DLIBSSH2_WIN32 /DLIBSSH2_LIBRARY /I "$(LIBSSH2_PATH)/include"
 CFLAGSZLIB   = /DHAVE_ZLIB_H /DHAVE_ZLIB /DHAVE_LIBZ /I "$(ZLIB_PATH)"
 CFLAGS       = /I. /I../include /nologo /W3 /GX /DWIN32 /YX /FD /c /DBUILDING_LIBCURL /D_BIND_TO_CURRENT_VCLIBS_VERSION=1
@@ -114,7 +115,7 @@ LNKDLL     = link.exe /DLL
 LNKLIB       = link.exe /lib
 LFLAGS       = /nologo /machine:$(MACHINE)
 SSLLIBS      = libeay32.lib ssleay32.lib
-ZLIBLIBSDLL= zdll.lib
+ZLIBLIBSDLL  = zdll.lib
 ZLIBLIBS     = zlib.lib
 WINLIBS      = ws2_32.lib wldap32.lib advapi32.lib
 CFLAGS       = $(CFLAGS)
@@ -189,6 +190,18 @@ CC       = $(CCNODBG) $(RTLIB) $(CFLAGSSSL) $(CFLAGSZLIB) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
+######################
+# release-winssl-zlib
+
+!IF "$(CFG)" == "release-winssl-zlib"
+TARGET   = $(LIBCURL_STA_LIB_REL)
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LNK      = $(LNKLIB) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCNODBG) $(RTLIB) $(CFLAGSWINSSL) $(CFLAGSZLIB) $(CFLAGSLIB)
+CFGSET   = TRUE
+!ENDIF
+
 ######################
 # release-ssl-ssh2-zlib
 
@@ -494,8 +507,10 @@ clean:
 # A config was provided, so the library can be built.
 #
 X_OBJS= \
+	$(DIROBJ)\amigaos.obj \
 	$(DIROBJ)\asyn-ares.obj \
 	$(DIROBJ)\asyn-thread.obj \
+	$(DIROBJ)\axtls.obj \
 	$(DIROBJ)\base64.obj \
 	$(DIROBJ)\bundles.obj \
 	$(DIROBJ)\conncache.obj \
@@ -506,19 +521,21 @@ X_OBJS= \
 	$(DIROBJ)\curl_darwinssl.obj \
 	$(DIROBJ)\curl_fnmatch.obj \
 	$(DIROBJ)\curl_gethostname.obj \
+	$(DIROBJ)\curl_gssapi.obj \
 	$(DIROBJ)\curl_memrchr.obj \
 	$(DIROBJ)\curl_multibyte.obj \
 	$(DIROBJ)\curl_ntlm.obj \
 	$(DIROBJ)\curl_ntlm_core.obj \
 	$(DIROBJ)\curl_ntlm_msgs.obj \
 	$(DIROBJ)\curl_ntlm_wb.obj \
-	$(DIROBJ)\curl_rand.obj \
 	$(DIROBJ)\curl_rtmp.obj \
 	$(DIROBJ)\curl_sasl.obj \
 	$(DIROBJ)\curl_schannel.obj \
 	$(DIROBJ)\curl_sspi.obj \
 	$(DIROBJ)\curl_threads.obj \
+	$(DIROBJ)\cyassl.obj \
 	$(DIROBJ)\dict.obj \
+	$(DIROBJ)\dotdot.obj \
 	$(DIROBJ)\easy.obj \
 	$(DIROBJ)\escape.obj \
 	$(DIROBJ)\file.obj \
@@ -544,10 +561,13 @@ X_OBJS= \
 	$(DIROBJ)\http_negotiate.obj \
 	$(DIROBJ)\http_negotiate_sspi.obj \
 	$(DIROBJ)\http_proxy.obj \
+	$(DIROBJ)\idn_win32.obj \
 	$(DIROBJ)\if2ip.obj \
 	$(DIROBJ)\imap.obj \
 	$(DIROBJ)\inet_ntop.obj \
 	$(DIROBJ)\inet_pton.obj \
+	$(DIROBJ)\krb4.obj \
+	$(DIROBJ)\krb5.obj \
 	$(DIROBJ)\ldap.obj \
 	$(DIROBJ)\llist.obj \
 	$(DIROBJ)\md4.obj \
@@ -556,15 +576,21 @@ X_OBJS= \
 	$(DIROBJ)\mprintf.obj \
 	$(DIROBJ)\multi.obj \
 	$(DIROBJ)\netrc.obj \
+	$(DIROBJ)\non-ascii.obj \
 	$(DIROBJ)\nonblock.obj \
+	$(DIROBJ)\nss.obj \
 	$(DIROBJ)\openldap.obj \
 	$(DIROBJ)\parsedate.obj \
 	$(DIROBJ)\pingpong.obj \
+	$(DIROBJ)\pipeline.obj \
 	$(DIROBJ)\polarssl.obj \
+	$(DIROBJ)\polarssl_threadlock.obj \
 	$(DIROBJ)\pop3.obj \
 	$(DIROBJ)\progress.obj \
+	$(DIROBJ)\qssl.obj \
 	$(DIROBJ)\rawstr.obj \
 	$(DIROBJ)\rtsp.obj \
+	$(DIROBJ)\security.obj \
 	$(DIROBJ)\select.obj \
 	$(DIROBJ)\sendf.obj \
 	$(DIROBJ)\share.obj \
@@ -578,6 +604,7 @@ X_OBJS= \
 	$(DIROBJ)\ssh.obj \
 	$(DIROBJ)\sslgen.obj \
 	$(DIROBJ)\ssluse.obj \
+	$(DIROBJ)\strdup.obj \
 	$(DIROBJ)\strequal.obj \
 	$(DIROBJ)\strerror.obj \
 	$(DIROBJ)\strtok.obj \

lib/Makefile.vxworks

@@ -33,10 +33,10 @@ BUILD_TYPE := debug
 USER_CFLAGS:=
 
 # directories where to seek for includes and libraries
-OPENSSL_INC := D:/libraries/openssl/openssl-0.9.8x-vxWorks6.3/include
-OPENSSL_LIB := D:/libraries/openssl/openssl-0.9.8x-vxWorks6.3
-ZLIB_INC    := D:/libraries/zlib/zlib-1.2.7-VxWorks6.3/zlib-1.2.7
-ZLIB_LIB    := D:/libraries/zlib/zlib-1.2.7-VxWorks6.3/binaries/vxworks_3.1_gnu/Debug/lib
+OPENSSL_INC := D:/libraries/openssl/openssl-0.9.8y-vxWorks6.3/include
+OPENSSL_LIB := D:/libraries/openssl/openssl-0.9.8y-vxWorks6.3
+ZLIB_INC    := D:/libraries/zlib/zlib-1.2.8-VxWorks6.3/zlib-1.2.8
+ZLIB_LIB    := D:/libraries/zlib/zlib-1.2.8-VxWorks6.3/binaries/vxworks_3.1_gnu/Debug/lib
 ARES_INC    :=
 ARES_LIB    :=
 

lib/README.pipelining

@@ -42,10 +42,3 @@ Details
   still resolve the second one properly to make sure that they actually _can_
   be considered for pipelining. Also, asking for explicit pipelining on handle
   X may be tricky when handle X get a closed connection.
-
-- We need options to control max pipeline length, and probably how to behave
-  if we reach that limit. As was discussed on the list, it can probably be
-  made very complicated, so perhaps we can think of a way to pass all
-  variables involved to a callback and let the application decide how to act
-  in specific situations. Either way, these fancy options are only interesting
-  to work on when everything is working and we have working apps to test with.

lib/asyn-ares.c

@@ -315,6 +315,7 @@ CURLcode Curl_resolver_is_resolved(struct connectdata *conn,
   struct SessionHandle *data = conn->data;
   struct ResolverResults *res = (struct ResolverResults *)
     conn->async.os_specific;
+  CURLcode rc = CURLE_OK;
 
   *dns = NULL;
 
@@ -325,19 +326,19 @@ CURLcode Curl_resolver_is_resolved(struct connectdata *conn,
     /* temp_ai ownership is moved to the connection, so we need not free-up
        them */
     res->temp_ai = NULL;
-    destroy_async_data(&conn->async);
     if(!conn->async.dns) {
-      failf(data, "Could not resolve %s: %s (%s)",
-            conn->bits.proxy?"proxy":"host",
-            conn->host.dispname,
-            ares_strerror(conn->async.status));
-      return conn->bits.proxy?CURLE_COULDNT_RESOLVE_PROXY:
+      failf(data, "Could not resolve: %s (%s)",
+            conn->async.hostname, ares_strerror(conn->async.status));
+      rc = conn->bits.proxy?CURLE_COULDNT_RESOLVE_PROXY:
         CURLE_COULDNT_RESOLVE_HOST;
     }
+    else
       *dns = conn->async.dns;
+
+    destroy_async_data(&conn->async);
   }
 
-  return CURLE_OK;
+  return rc;
 }
 
 /*
@@ -415,37 +416,12 @@ CURLcode Curl_resolver_wait_resolv(struct connectdata *conn,
   if(entry)
     *entry = conn->async.dns;
 
-  if(!conn->async.dns) {
-    /* a name was not resolved */
-    if((timeout < 0) || (conn->async.status == ARES_ETIMEOUT)) {
-      if(conn->bits.proxy) {
-        failf(data, "Resolving proxy timed out: %s", conn->proxy.dispname);
-        rc = CURLE_COULDNT_RESOLVE_PROXY;
-      }
-      else {
-        failf(data, "Resolving host timed out: %s", conn->host.dispname);
-        rc = CURLE_COULDNT_RESOLVE_HOST;
-      }
-    }
-    else if(conn->async.done) {
-      if(conn->bits.proxy) {
-        failf(data, "Could not resolve proxy: %s (%s)", conn->proxy.dispname,
-              ares_strerror(conn->async.status));
-        rc = CURLE_COULDNT_RESOLVE_PROXY;
-      }
-      else {
-        failf(data, "Could not resolve host: %s (%s)", conn->host.dispname,
-              ares_strerror(conn->async.status));
-        rc = CURLE_COULDNT_RESOLVE_HOST;
-      }
-    }
-    else
-      rc = CURLE_OPERATION_TIMEDOUT;
-
+  if(rc)
     /* close the connection, since we can't return failure here without
-       cleaning up this connection properly */
+       cleaning up this connection properly.
+       TODO: remove this action from here, it is not a name resolver decision.
+    */
     conn->bits.close = TRUE;
-  }
 
   return rc;
 }
@@ -614,8 +590,19 @@ CURLcode Curl_set_dns_servers(struct SessionHandle *data,
                               char *servers)
 {
   CURLcode result = CURLE_NOT_BUILT_IN;
+  int ares_result;
+
+  /* If server is NULL or empty, this would purge all DNS servers
+   * from ares library, which will cause any and all queries to fail.
+   * So, just return OK if none are configured and don't actually make
+   * any changes to c-ares.  This lets c-ares use it's defaults, which
+   * it gets from the OS (for instance from /etc/resolv.conf on Linux).
+   */
+  if(!(servers && servers[0]))
+    return CURLE_OK;
+
 #if (ARES_VERSION >= 0x010704)
-  int ares_result = ares_set_servers_csv(data->state.resolver, servers);
+  ares_result = ares_set_servers_csv(data->state.resolver, servers);
   switch(ares_result) {
   case ARES_SUCCESS:
     result = CURLE_OK;
@@ -632,7 +619,7 @@ CURLcode Curl_set_dns_servers(struct SessionHandle *data,
   }
 #else /* too old c-ares version! */
   (void)data;
-  (void)servers;
+  (void)(ares_result);
 #endif
   return result;
 }

lib/asyn-thread.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -170,7 +170,7 @@ struct thread_sync_data {
 struct thread_data {
   curl_thread_t thread_hnd;
   unsigned int poll_interval;
-  int interval_end;
+  long interval_end;
   struct thread_sync_data tsd;
 };
 
@@ -387,61 +387,27 @@ static bool init_resolve_thread (struct connectdata *conn,
   return FALSE;
 }
 
-#if defined(HAVE_GETADDRINFO) && !defined(HAVE_GAI_STRERROR) && !defined(WIN32)
-/* NetWare has getaddrinfo but lacks gai_strerror.
-   Windows has a gai_strerror but it is bad (not thread-safe) and the generic
-   socket error string function can be used for this pupose. */
-static const char *gai_strerror(int ecode)
-{
-  switch (ecode) {
-  case EAI_AGAIN:
-    return "The name could not be resolved at this time";
-  case EAI_BADFLAGS:
-    return "The flags parameter had an invalid value";
-  case EAI_FAIL:
-    return "A non-recoverable error occurred when attempting to "
-      "resolve the name";
-  case EAI_FAMILY:
-    return "The address family was not recognized";
-  case EAI_MEMORY:
-    return "Out of memory";
-  case EAI_NONAME:
-    return "The name does not resolve for the supplied parameters";
-  case EAI_SERVICE:
-    return "The service passed was not recognized for the "
-      "specified socket type"
-  case EAI_SOCKTYPE:
-    return "The intended socket type was not recognized"
-  case EAI_SYSTEM:
-    return "A system error occurred";
-  case EAI_OVERFLOW:
-    return "An argument buffer overflowed";
-  default:
-    return "Unknown error";
-
-/* define this now as this is a private implementation of said function */
-#define HAVE_GAI_STRERROR
-}
-#endif
-
-
 /*
  * resolver_error() calls failf() with the appropriate message after a resolve
  * error
  */
 
-static void resolver_error(struct connectdata *conn, const char *host_or_proxy)
+static CURLcode resolver_error(struct connectdata *conn)
 {
-  failf(conn->data, "Could not resolve %s: %s; %s", host_or_proxy,
-        conn->async.hostname,
-#ifdef HAVE_GAI_STRERROR
-        /* NetWare doesn't have gai_strerror and on Windows it isn't deemed
-           thread-safe */
-        gai_strerror(conn->async.status)
-#else
-        Curl_strerror(conn, conn->async.status)
-#endif
-    );
+  const char *host_or_proxy;
+  CURLcode rc;
+  if(conn->bits.httpproxy) {
+    host_or_proxy = "proxy";
+    rc = CURLE_COULDNT_RESOLVE_PROXY;
+  }
+  else {
+    host_or_proxy = "host";
+    rc = CURLE_COULDNT_RESOLVE_HOST;
+  }
+
+  failf(conn->data, "Could not resolve %s: %s", host_or_proxy,
+        conn->async.hostname);
+  return rc;
 }
 
 /*
@@ -473,17 +439,9 @@ CURLcode Curl_resolver_wait_resolv(struct connectdata *conn,
   if(entry)
     *entry = conn->async.dns;
 
-  if(!conn->async.dns) {
-    /* a name was not resolved */
-    if(conn->bits.httpproxy) {
-      resolver_error(conn, "proxy");
-      rc = CURLE_COULDNT_RESOLVE_PROXY;
-    }
-    else {
-      resolver_error(conn, "host");
-      rc = CURLE_COULDNT_RESOLVE_HOST;
-    }
-  }
+  if(!conn->async.dns)
+    /* a name was not resolved, report error */
+    rc = resolver_error(conn);
 
   destroy_async_data(&conn->async);
 
@@ -518,17 +476,18 @@ CURLcode Curl_resolver_is_resolved(struct connectdata *conn,
 
   if(done) {
     getaddrinfo_complete(conn);
-    destroy_async_data(&conn->async);
 
     if(!conn->async.dns) {
-      resolver_error(conn, "host");
-      return CURLE_COULDNT_RESOLVE_HOST;
+      CURLcode rc = resolver_error(conn);
+      destroy_async_data(&conn->async);
+      return rc;
     }
+    destroy_async_data(&conn->async);
     *entry = conn->async.dns;
   }
   else {
     /* poll for name lookup done with exponential backoff up to 250ms */
-    int elapsed = Curl_tvdiff(Curl_tvnow(), data->progress.t_startsingle);
+    long elapsed = Curl_tvdiff(Curl_tvnow(), data->progress.t_startsingle);
     if(elapsed < 0)
       elapsed = 0;
 

lib/axtls.c

@@ -41,26 +41,12 @@
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
 #include "curl_memory.h"
+#include <unistd.h>
 /* The last #include file should be: */
 #include "memdebug.h"
 #include "hostcheck.h"
 
 
-/* SSL_read is opied from axTLS compat layer */
-static int SSL_read(SSL *ssl, void *buf, int num)
-{
-  uint8_t *read_buf;
-  int ret;
-
-  while((ret = ssl_read(ssl, &read_buf)) == SSL_OK);
-
-  if(ret > SSL_OK) {
-    memcpy(buf, read_buf, ret > num ? num : ret);
-  }
-
-  return ret;
-}
-
 /* Global axTLS init, called from Curl_ssl_init() */
 int Curl_axtls_init(void)
 {
@@ -131,31 +117,40 @@ static CURLcode map_error_to_curl(int axtls_err)
 static Curl_recv axtls_recv;
 static Curl_send axtls_send;
 
-/*
- * This function is called after the TCP connect has completed. Setup the TLS
- * layer and do all necessary magic.
- */
-CURLcode
-Curl_axtls_connect(struct connectdata *conn,
-                  int sockindex)
+static void free_ssl_structs(struct ssl_connect_data *connssl)
+{
+  if(connssl->ssl) {
+    ssl_free (connssl->ssl);
+    connssl->ssl = NULL;
+  }
+  if(connssl->ssl_ctx) {
+    ssl_ctx_free(connssl->ssl_ctx);
+    connssl->ssl_ctx = NULL;
+  }
+}
 
+/*
+ * For both blocking and non-blocking connects, this function sets up the
+ * ssl context and state.  This function is called after the TCP connect
+ * has completed.
+ */
+static CURLcode connect_prep(struct connectdata *conn, int sockindex)
 {
   struct SessionHandle *data = conn->data;
   SSL_CTX *ssl_ctx;
-  SSL *ssl;
+  SSL *ssl = NULL;
   int cert_types[] = {SSL_OBJ_X509_CERT, SSL_OBJ_PKCS12, 0};
   int key_types[] = {SSL_OBJ_RSA_KEY, SSL_OBJ_PKCS8, SSL_OBJ_PKCS12, 0};
   int i, ssl_fcn_return;
   const uint8_t *ssl_sessionid;
   size_t ssl_idsize;
-  const char *peer_CN;
-  uint32_t dns_altname_index;
-  const char *dns_altname;
-  int8_t found_subject_alt_names = 0;
-  int8_t found_subject_alt_name_matching_conn = 0;
 
-  /* Assuming users will not compile in custom key/cert to axTLS */
-  uint32_t client_option = SSL_NO_DEFAULT_KEY|SSL_SERVER_VERIFY_LATER;
+  /* Assuming users will not compile in custom key/cert to axTLS.
+  *  Also, even for blocking connects, use axTLS non-blocking feature.
+  */
+  uint32_t client_option = SSL_NO_DEFAULT_KEY |
+    SSL_SERVER_VERIFY_LATER |
+    SSL_CONNECT_IN_PARTS;
 
   if(conn->ssl[sockindex].state == ssl_connection_complete)
     /* to make us tolerant against being called more than once for the
@@ -184,6 +179,9 @@ Curl_axtls_connect(struct connectdata *conn,
     return CURLE_SSL_CONNECT_ERROR;
   }
 
+  conn->ssl[sockindex].ssl_ctx = ssl_ctx;
+  conn->ssl[sockindex].ssl = NULL;
+
   /* Load the trusted CA cert bundle file */
   if(data->set.ssl.CAfile) {
     if(ssl_obj_load(ssl_ctx, SSL_OBJ_X509_CACERT, data->set.ssl.CAfile, NULL)
@@ -191,7 +189,6 @@ Curl_axtls_connect(struct connectdata *conn,
       infof(data, "error reading ca cert file %s \n",
             data->set.ssl.CAfile);
       if(data->set.ssl.verifypeer) {
-        Curl_axtls_close(conn, sockindex);
         return CURLE_SSL_CACERT_BADFILE;
       }
     }
@@ -225,7 +222,6 @@ Curl_axtls_connect(struct connectdata *conn,
     if(cert_types[i] == 0) {
       failf(data, "%s is not x509 or pkcs12 format",
             data->set.str[STRING_CERT]);
-      Curl_axtls_close(conn, sockindex);
       return CURLE_SSL_CERTPROBLEM;
     }
   }
@@ -250,7 +246,6 @@ Curl_axtls_connect(struct connectdata *conn,
     if(key_types[i] == 0) {
       failf(data, "Failure: %s is not a supported key file",
             data->set.str[STRING_KEY]);
-      Curl_axtls_close(conn, sockindex);
       return CURLE_SSL_CONNECT_ERROR;
     }
   }
@@ -271,14 +266,25 @@ Curl_axtls_connect(struct connectdata *conn,
   else
     ssl = ssl_client_new(ssl_ctx, conn->sock[sockindex], NULL, 0);
 
-  /* Check to make sure handshake was ok. */
-  ssl_fcn_return = ssl_handshake_status(ssl);
-  if(ssl_fcn_return != SSL_OK) {
-    Curl_axtls_close(conn, sockindex);
-    ssl_display_error(ssl_fcn_return); /* goes to stdout. */
-    return map_error_to_curl(ssl_fcn_return);
-  }
-  infof (data, "handshake completed successfully\n");
+  conn->ssl[sockindex].ssl = ssl;
+  return CURLE_OK;
+}
+
+/*
+ * For both blocking and non-blocking connects, this function finalizes the
+ * SSL connection.
+ */
+static CURLcode connect_finish(struct connectdata *conn, int sockindex)
+{
+  struct SessionHandle *data = conn->data;
+  SSL *ssl = conn->ssl[sockindex].ssl;
+  const uint8_t *ssl_sessionid;
+  size_t ssl_idsize;
+  const char *peer_CN;
+  uint32_t dns_altname_index;
+  const char *dns_altname;
+  int8_t found_subject_alt_names = 0;
+  int8_t found_subject_alt_name_matching_conn = 0;
 
   /* Here, gtls.c gets the peer certificates and fails out depending on
    * settings in "data."  axTLS api doesn't have get cert chain fcn, so omit?
@@ -289,7 +295,7 @@ Curl_axtls_connect(struct connectdata *conn,
     if(ssl_verify_cert(ssl) != SSL_OK) {
       Curl_axtls_close(conn, sockindex);
       failf(data, "server cert verify failed");
-      return CURLE_SSL_CONNECT_ERROR;
+      return CURLE_PEER_FAILED_VERIFICATION;
     }
   }
   else
@@ -306,7 +312,6 @@ Curl_axtls_connect(struct connectdata *conn,
    *    this, but a couple fields are available.
    */
 
-
   /* There is no (DNS) Altnames count in the version 1.4.8 API. There is a
      risk of an inifite loop */
   for(dns_altname_index = 0; ; dns_altname_index++) {
@@ -326,21 +331,30 @@ Curl_axtls_connect(struct connectdata *conn,
 
   /* RFC2818 checks */
   if(found_subject_alt_names && !found_subject_alt_name_matching_conn) {
+    if(data->set.ssl.verifyhost) {
       /* Break connection ! */
       Curl_axtls_close(conn, sockindex);
-    failf(data, "\tsubjectAltName(s) do not match %s\n", conn->host.dispname);
+      failf(data, "\tsubjectAltName(s) do not match %s\n",
+            conn->host.dispname);
       return CURLE_PEER_FAILED_VERIFICATION;
     }
+    else
+      infof(data, "\tsubjectAltName(s) do not match %s\n",
+            conn->host.dispname);
+  }
   else if(found_subject_alt_names == 0) {
     /* Per RFC2818, when no Subject Alt Names were available, examine the peer
        CN as a legacy fallback */
     peer_CN = ssl_get_cert_dn(ssl, SSL_X509_CERT_COMMON_NAME);
     if(peer_CN == NULL) {
-      /* Similar behaviour to the OpenSSL interface */
+      if(data->set.ssl.verifyhost) {
         Curl_axtls_close(conn, sockindex);
         failf(data, "unable to obtain common name from peer certificate");
         return CURLE_PEER_FAILED_VERIFICATION;
       }
+      else
+        infof(data, "unable to obtain common name from peer certificate");
+    }
     else {
       if(!Curl_cert_hostcheck((const char *)peer_CN, conn->host.name)) {
         if(data->set.ssl.verifyhost) {
@@ -359,8 +373,6 @@ Curl_axtls_connect(struct connectdata *conn,
 
   /* General housekeeping */
   conn->ssl[sockindex].state = ssl_connection_complete;
-  conn->ssl[sockindex].ssl = ssl;
-  conn->ssl[sockindex].ssl_ctx = ssl_ctx;
   conn->recv[sockindex] = axtls_recv;
   conn->send[sockindex] = axtls_send;
 
@@ -374,6 +386,107 @@ Curl_axtls_connect(struct connectdata *conn,
   return CURLE_OK;
 }
 
+/*
+ * Use axTLS's non-blocking connection feature to open an SSL connection.
+ * This is called after a TCP connection is already established.
+*/
+CURLcode Curl_axtls_connect_nonblocking(
+    struct connectdata *conn,
+    int sockindex,
+    bool *done)
+{
+  CURLcode conn_step;
+  int ssl_fcn_return;
+
+ *done = FALSE;
+  /* connectdata is calloc'd and connecting_state is only changed in this
+     function, so this is safe, as the state is effectively initialized. */
+  if(conn->ssl[sockindex].connecting_state == ssl_connect_1) {
+    conn_step = connect_prep(conn, sockindex);
+    if(conn_step != CURLE_OK) {
+      Curl_axtls_close(conn, sockindex);
+      return conn_step;
+    }
+    conn->ssl[sockindex].connecting_state = ssl_connect_2;
+  }
+
+  if(conn->ssl[sockindex].connecting_state == ssl_connect_2) {
+    /* Check to make sure handshake was ok. */
+    if(ssl_handshake_status(conn->ssl[sockindex].ssl) != SSL_OK) {
+      ssl_fcn_return = ssl_read(conn->ssl[sockindex].ssl, NULL);
+      if(ssl_fcn_return < 0) {
+        Curl_axtls_close(conn, sockindex);
+        ssl_display_error(ssl_fcn_return); /* goes to stdout. */
+        return map_error_to_curl(ssl_fcn_return);
+      }
+      else {
+        return CURLE_OK; /* Return control to caller for retries */
+      }
+    }
+    infof (conn->data, "handshake completed successfully\n");
+    conn->ssl[sockindex].connecting_state = ssl_connect_3;
+  }
+
+  if(conn->ssl[sockindex].connecting_state == ssl_connect_3) {
+    conn_step = connect_finish(conn, sockindex);
+    if(conn_step != CURLE_OK) {
+      Curl_axtls_close(conn, sockindex);
+      return conn_step;
+    }
+
+    /* Reset connect state */
+    conn->ssl[sockindex].connecting_state = ssl_connect_1;
+
+    *done = TRUE;
+    return CURLE_OK;
+  }
+
+  /* Unrecognized state.  Things are very bad. */
+  conn->ssl[sockindex].state  = ssl_connection_none;
+  conn->ssl[sockindex].connecting_state = ssl_connect_1;
+  /* Return value perhaps not strictly correct, but distinguishes the issue.*/
+  return CURLE_BAD_FUNCTION_ARGUMENT;
+}
+
+
+/*
+ * This function is called after the TCP connect has completed. Setup the TLS
+ * layer and do all necessary magic for a blocking connect.
+ */
+CURLcode
+Curl_axtls_connect(struct connectdata *conn,
+                  int sockindex)
+
+{
+  CURLcode conn_step = connect_prep(conn, sockindex);
+  int ssl_fcn_return;
+  SSL *ssl = conn->ssl[sockindex].ssl;
+
+  if(conn_step != CURLE_OK) {
+    Curl_axtls_close(conn, sockindex);
+    return conn_step;
+  }
+
+  /* Check to make sure handshake was ok. */
+  while(ssl_handshake_status(ssl) != SSL_OK) {
+    ssl_fcn_return = ssl_read(ssl, NULL);
+    if(ssl_fcn_return < 0) {
+      Curl_axtls_close(conn, sockindex);
+      ssl_display_error(ssl_fcn_return); /* goes to stdout. */
+      return map_error_to_curl(ssl_fcn_return);
+    }
+    usleep(10000);
+  }
+  infof (conn->data, "handshake completed successfully\n");
+
+  conn_step = connect_finish(conn, sockindex);
+  if(conn_step != CURLE_OK) {
+    Curl_axtls_close(conn, sockindex);
+    return conn_step;
+  }
+
+  return CURLE_OK;
+}
 
 /* return number of sent (non-SSL) bytes */
 static ssize_t axtls_send(struct connectdata *conn,
@@ -407,7 +520,7 @@ void Curl_axtls_close(struct connectdata *conn, int sockindex)
   struct ssl_connect_data *connssl = &conn->ssl[sockindex];
 
   infof(conn->data, "  Curl_axtls_close\n");
-  if(connssl->ssl) {
+
     /* line from ssluse.c: (void)SSL_shutdown(connssl->ssl);
        axTLS compat layer does nothing for SSL_shutdown */
 
@@ -415,13 +528,7 @@ void Curl_axtls_close(struct connectdata *conn, int sockindex)
        equivalent.  ssl_free and ssl_ctx_free close things.
        SSL_set_connect_state(connssl->handle); */
 
-    ssl_free (connssl->ssl);
-    connssl->ssl = NULL;
-  }
-  if(connssl->ssl_ctx) {
-    ssl_ctx_free (connssl->ssl_ctx);
-    connssl->ssl_ctx = NULL;
-  }
+  free_ssl_structs(connssl);
 }
 
 /*
@@ -436,8 +543,7 @@ int Curl_axtls_shutdown(struct connectdata *conn, int sockindex)
   int retval = 0;
   struct ssl_connect_data *connssl = &conn->ssl[sockindex];
   struct SessionHandle *data = conn->data;
-  char buf[120]; /* We will use this for the OpenSSL error buffer, so it has
-                    to be at least 120 bytes long. */
+  uint8_t *buf;
   ssize_t nread;
 
   infof(conn->data, "  Curl_axtls_shutdown\n");
@@ -457,9 +563,10 @@ int Curl_axtls_shutdown(struct connectdata *conn, int sockindex)
                                  CURL_SOCKET_BAD, SSL_SHUTDOWN_TIMEOUT);
     if(what > 0) {
       /* Something to read, let's do it and hope that it is the close
-         notify alert from the server */
-      nread = (ssize_t)SSL_read(conn->ssl[sockindex].ssl, buf,
-                                sizeof(buf));
+         notify alert from the server.  buf is managed internally by
+         axTLS and will be released upon calling ssl_free via
+         free_ssl_structs. */
+      nread = (ssize_t)ssl_read(connssl->ssl, &buf);
 
       if(nread < SSL_OK) {
         failf(data, "close notify alert not received during shutdown");
@@ -476,8 +583,7 @@ int Curl_axtls_shutdown(struct connectdata *conn, int sockindex)
       retval = -1;
     }
 
-    ssl_free (connssl->ssl);
-    connssl->ssl = NULL;
+    free_ssl_structs(connssl);
   }
   return retval;
 }
@@ -490,26 +596,36 @@ static ssize_t axtls_recv(struct connectdata *conn, /* connection data */
 {
   struct ssl_connect_data *connssl = &conn->ssl[num];
   ssize_t ret = 0;
+  uint8_t *read_buf;
 
   infof(conn->data, "  axtls_recv\n");
 
+  *err = CURLE_OK;
   if(connssl) {
-    ret = (ssize_t)SSL_read(conn->ssl[num].ssl, buf, (int)buffersize);
-
-    /* axTLS isn't terribly generous about error reporting */
+    ret = ssl_read(connssl->ssl, &read_buf);
+    if(ret > SSL_OK) {
+      /* ssl_read returns SSL_OK if there is more data to read, so if it is
+         larger, then all data has been read already.  */
+      memcpy(buf, read_buf,
+             (size_t)ret > buffersize ? buffersize : (size_t)ret);
+    }
+    else if(ret == SSL_OK) {
+      /* more data to be read, signal caller to call again */
+      *err = CURLE_AGAIN;
+      ret = -1;
+    }
+    else if(ret == -3) {
       /* With patched axTLS, SSL_CLOSE_NOTIFY=-3.  Hard-coding until axTLS
          team approves proposed fix. */
-    if(ret == -3 ) {
       Curl_axtls_close(conn, num);
     }
-    else if(ret < 0) {
-      failf(conn->data, "axTLS recv error (%d)", (int)ret);
+    else {
+      failf(conn->data, "axTLS recv error (%d)", ret);
       *err = map_error_to_curl(ret);
-      return -1;
+      ret = -1;
     }
   }
 
-  *err = CURLE_OK;
   return ret;
 }
 

lib/axtls.h

@@ -30,6 +30,10 @@
 int Curl_axtls_init(void);
 int Curl_axtls_cleanup(void);
 CURLcode Curl_axtls_connect(struct connectdata *conn, int sockindex);
+CURLcode Curl_axtls_connect_nonblocking(
+    struct connectdata *conn,
+    int sockindex,
+    bool *done);
 
 /* tell axTLS to close down all open information regarding connections (and
    thus session ID caching etc) */
@@ -47,6 +51,7 @@ int Curl_axtls_check_cxn(struct connectdata *conn);
 #define curlssl_init Curl_axtls_init
 #define curlssl_cleanup Curl_axtls_cleanup
 #define curlssl_connect Curl_axtls_connect
+#define curlssl_connect_nonblocking Curl_axtls_connect_nonblocking
 #define curlssl_session_free(x)  Curl_axtls_session_free(x)
 #define curlssl_close_all Curl_axtls_close_all
 #define curlssl_close Curl_axtls_close

lib/checksrc.pl

@@ -6,7 +6,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 2011 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -153,6 +153,12 @@ sub scanfile {
             checkwarn($line, length($1)+1, $file, $l, "missing space after close paren");
         }
 
+        # scan for use of banned functions
+        if($l =~ /^(.*\W)(sprintf|vsprintf|strcat|strncat|gets)\s*\(/) {
+            checkwarn($line, length($1), $file, $l,
+                      "use of $2 is banned");
+        }
+
         # check for open brace first on line but not first column
         # only alert if previous line ended with a close paren and wasn't a cpp
         # line

lib/config-dos.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -79,7 +79,6 @@
 #define HAVE_SYS_SOCKET_H      1
 #define HAVE_SYS_STAT_H        1
 #define HAVE_SYS_TYPES_H       1
-#define HAVE_TERMIOS_H         1
 #define HAVE_TIME_H            1
 #define HAVE_UNISTD_H          1
 
@@ -149,7 +148,7 @@
 
 #if defined(__HIGHC__) || \
     (defined(__GNUC__) && (__GNUC__ < 4))
-#define ssize_t    int
+  #define ssize_t  int
 #endif
 
 #define CURL_CA_BUNDLE  getenv("CURL_CA_BUNDLE")
@@ -162,12 +161,9 @@
   #define HAVE_SIGACTION  1
   #define HAVE_SIGSETJMP  1
   #define HAVE_SYS_TIME_H 1
+  #define HAVE_TERMIOS_H  1
   #define HAVE_VARIADIC_MACROS_GCC 1
 
-  #if (DJGPP_MINOR >= 4)
-    #define HAVE_STRLCAT  1
-  #endif
-
   /* Because djgpp <= 2.03 doesn't have snprintf() etc. */
   #if (DJGPP_MINOR < 4)
     #define _MPRINTF_REPLACE
@@ -178,11 +174,11 @@
 
 #elif defined(__HIGHC__)
   #define HAVE_SYS_TIME_H 1
+  #define strerror(e) strerror_s_((e))
 #endif
 
 #ifdef MSDOS  /* Watt-32 */
-  #define HAVE_CLOSESOCKET_CAMEL  1
-  #define CloseSocket(s)          close_s((s))
+  #define HAVE_CLOSE_S    1
 #endif
 
 #undef word

lib/config-os400.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -277,30 +277,33 @@
 /* Define if you have the <stdlib.h> header file. */
 #define HAVE_STDLIB_H
 
+
+/* The following define is needed on OS400 to enable strcmpi(), stricmp() and
+   strdup(). */
+#define __cplusplus__strings__
+
 /* Define if you have the `strcasecmp' function. */
 #undef HAVE_STRCASECMP
 
 /* Define if you have the `strcmpi' function. */
-#undef HAVE_STRCMPI
+#define HAVE_STRCMPI
+
+/* Define if you have the `stricmp' function. */
+#define HAVE_STRICMP
 
 /* Define if you have the `strdup' function. */
-#undef HAVE_STRDUP
+#define HAVE_STRDUP
+
 
 /* Define if you have the `strftime' function. */
 #define HAVE_STRFTIME
 
-/* Define if you have the `stricmp' function. */
-#undef HAVE_STRICMP
-
 /* Define if you have the <strings.h> header file. */
 #define HAVE_STRINGS_H
 
 /* Define if you have the <string.h> header file. */
 #define HAVE_STRING_H
 
-/* Define if you have the `strlcat' function. */
-#undef HAVE_STRLCAT
-
 /* Define if you have the `strlcpy' function. */
 #undef HAVE_STRLCPY
 
@@ -528,6 +531,9 @@
 /* Define to use the QsoSSL package. */
 #define USE_QSOSSL
 
+/* Define to use the GSKit package. */
+#undef USE_GSKIT
+
 /* Use the system keyring as the default CA bundle. */
 #define CURL_CA_BUNDLE  "/QIBM/UserData/ICSS/Cert/Server/DEFAULT.KDB"
 

lib/config-riscos.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -305,9 +305,6 @@
 /* Define if you have the <string.h> header file. */
 #define HAVE_STRING_H
 
-/* Define if you have the `strlcat' function. */
-#undef HAVE_STRLCAT
-
 /* Define if you have the `strlcpy' function. */
 #undef HAVE_STRLCPY
 

lib/config-symbian.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -504,9 +504,6 @@
 /* Define to 1 if you have the `strcasecmp' function. */
 #define HAVE_STRCASECMP 1
 
-/* Define to 1 if you have the `strcasestr' function. */
-#define HAVE_STRCASESTR 1
-
 /* Define to 1 if you have the `strcmpi' function. */
 /* #undef HAVE_STRCMPI */
 
@@ -525,9 +522,6 @@
 /* Define to 1 if you have the <string.h> header file. */
 #define HAVE_STRING_H 1
 
-/* Define to 1 if you have the `strlcat' function. */
-#define HAVE_STRLCAT 1
-
 /* Define to 1 if you have the `strlcpy' function. */
 #define HAVE_STRLCPY 1
 

lib/config-tpf.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -471,9 +471,6 @@
 /* Define to 1 if you have the <string.h> header file. */
 #define HAVE_STRING_H 1
 
-/* Define to 1 if you have the `strlcat' function. */
-/* #undef HAVE_STRLCAT */
-
 /* Define to 1 if you have the `strlcpy' function. */
 /* #undef HAVE_STRLCPY */
 

lib/config-vxworks.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -571,9 +571,6 @@
 /* Define to 1 if you have the strcasecmp function. */
 #define HAVE_STRCASECMP 1
 
-/* Define to 1 if you have the strcasestr function. */
-/* #undef HAVE_STRCASESTR */
-
 /* Define to 1 if you have the strcmpi function. */
 /* #undef HAVE_STRCMPI */
 
@@ -592,9 +589,6 @@
 /* Define to 1 if you have the <string.h> header file. */
 #define HAVE_STRING_H 1
 
-/* Define to 1 if you have the strlcat function. */
-/* #undef HAVE_STRLCAT */
-
 /* Define to 1 if you have the `strlcpy' function. */
 /* #undef HAVE_STRLCPY */
 

lib/config-win32.h

@@ -611,8 +611,11 @@
 /* Define to enable c-ares asynchronous DNS lookups. */
 /* #define USE_ARES 1 */
 
-/* Define to enable threaded asynchronous DNS lookups. */
-#define USE_THREADS_WIN32 1
+/* Default define to enable threaded asynchronous DNS lookups. */
+#if !defined(USE_SYNC_DNS) && !defined(USE_ARES) && \
+    !defined(USE_THREADS_WIN32)
+#  define USE_THREADS_WIN32 1
+#endif
 
 #if defined(USE_ARES) && defined(USE_THREADS_WIN32)
 #  error "Only one DNS lookup specialty may be defined at most"

lib/conncache.c

@@ -38,8 +38,6 @@
 /* The last #include file should be: */
 #include "memdebug.h"
 
-#define CONNECTION_HASH_SIZE 97
-
 static void free_bundle_hash_entry(void *freethis)
 {
   struct connectbundle *b = (struct connectbundle *) freethis;
@@ -47,7 +45,7 @@ static void free_bundle_hash_entry(void *freethis)
   Curl_bundle_destroy(b);
 }
 
-struct conncache *Curl_conncache_init(void)
+struct conncache *Curl_conncache_init(int size)
 {
   struct conncache *connc;
 
@@ -55,7 +53,7 @@ struct conncache *Curl_conncache_init(void)
   if(!connc)
     return NULL;
 
-  connc->hash = Curl_hash_alloc(CONNECTION_HASH_SIZE, Curl_hash_str,
+  connc->hash = Curl_hash_alloc(size, Curl_hash_str,
                                 Curl_str_key_compare, free_bundle_hash_entry);
 
   if(!connc->hash) {

lib/conncache.h

@@ -27,7 +27,7 @@ struct conncache {
   size_t num_connections;
 };
 
-struct conncache *Curl_conncache_init(void);
+struct conncache *Curl_conncache_init(int size);
 
 void Curl_conncache_destroy(struct conncache *connc);
 

lib/connect.c

@@ -87,13 +87,23 @@
 
 static bool verifyconnect(curl_socket_t sockfd, int *error);
 
-#ifdef __DragonFly__
-/* DragonFlyBSD uses millisecond as KEEPIDLE and KEEPINTVL units */
+#if defined(__DragonFly__) || defined(HAVE_WINSOCK_H)
+/* DragonFlyBSD and Windows use millisecond units */
 #define KEEPALIVE_FACTOR(x) (x *= 1000)
 #else
 #define KEEPALIVE_FACTOR(x)
 #endif
 
+#if defined(HAVE_WINSOCK_H) && !defined(SIO_KEEPALIVE_VALS)
+#define SIO_KEEPALIVE_VALS    _WSAIOW(IOC_VENDOR,4)
+
+struct tcp_keepalive {
+  u_long onoff;
+  u_long keepalivetime;
+  u_long keepaliveinterval;
+};
+#endif
+
 static void
 tcpkeepalive(struct SessionHandle *data,
              curl_socket_t sockfd)
@@ -106,6 +116,22 @@ tcpkeepalive(struct SessionHandle *data,
     infof(data, "Failed to set SO_KEEPALIVE on fd %d\n", sockfd);
   }
   else {
+#if defined(SIO_KEEPALIVE_VALS)
+    struct tcp_keepalive vals;
+    DWORD dummy;
+    vals.onoff = 1;
+    optval = curlx_sltosi(data->set.tcp_keepidle);
+    KEEPALIVE_FACTOR(optval);
+    vals.keepalivetime = optval;
+    optval = curlx_sltosi(data->set.tcp_keepintvl);
+    KEEPALIVE_FACTOR(optval);
+    vals.keepaliveinterval = optval;
+    if(WSAIoctl(sockfd, SIO_KEEPALIVE_VALS, (LPVOID) &vals, sizeof(vals),
+                NULL, 0, &dummy, NULL, NULL) != 0) {
+      infof(data, "Failed to set SIO_KEEPALIVE_VALS on fd %d: %d\n",
+            (int)sockfd, WSAGetLastError());
+    }
+#else
 #ifdef TCP_KEEPIDLE
     optval = curlx_sltosi(data->set.tcp_keepidle);
     KEEPALIVE_FACTOR(optval);
@@ -121,6 +147,16 @@ tcpkeepalive(struct SessionHandle *data,
           (void *)&optval, sizeof(optval)) < 0) {
       infof(data, "Failed to set TCP_KEEPINTVL on fd %d\n", sockfd);
     }
+#endif
+#ifdef TCP_KEEPALIVE
+    /* Mac OS X style */
+    optval = curlx_sltosi(data->set.tcp_keepidle);
+    KEEPALIVE_FACTOR(optval);
+    if(setsockopt(sockfd, IPPROTO_TCP, TCP_KEEPALIVE,
+          (void *)&optval, sizeof(optval)) < 0) {
+      infof(data, "Failed to set TCP_KEEPALIVE on fd %d\n", sockfd);
+    }
+#endif
 #endif
   }
 }
@@ -283,10 +319,20 @@ static CURLcode bindlocal(struct connectdata *conn,
     }
 
     /* interface */
-    if(!is_host && (is_interface || Curl_if_is_interface_name(dev))) {
-      if(Curl_if2ip(af, dev, myhost, sizeof(myhost)) == NULL)
+    if(!is_host) {
+      switch(Curl_if2ip(af, conn->scope, dev, myhost, sizeof(myhost))) {
+        case IF2IP_NOT_FOUND:
+          if(is_interface) {
+            /* Do not fall back to treating it as a host name */
+            failf(data, "Couldn't bind to interface '%s'", dev);
             return CURLE_INTERFACE_FAILED;
-
+          }
+          break;
+        case IF2IP_AF_NOT_SUPPORTED:
+          /* Signal the caller to try another address family if available */
+          return CURLE_UNSUPPORTED_PROTOCOL;
+        case IF2IP_FOUND:
+          is_interface = TRUE;
           /*
            * We now have the numerical IP address in the 'myhost' buffer
            */
@@ -295,16 +341,16 @@ static CURLcode bindlocal(struct connectdata *conn,
           done = 1;
 
 #ifdef SO_BINDTODEVICE
-      /* I am not sure any other OSs than Linux that provide this feature, and
-       * at the least I cannot test. --Ben
+          /* I am not sure any other OSs than Linux that provide this feature,
+           * and at the least I cannot test. --Ben
            *
            * This feature allows one to tightly bind the local socket to a
-       * particular interface.  This will force even requests to other local
-       * interfaces to go out the external interface.
+           * particular interface.  This will force even requests to other
+           * local interfaces to go out the external interface.
            *
            *
-       * Only bind to the interface when specified as interface, not just as a
-       * hostname or ip address.
+           * Only bind to the interface when specified as interface, not just
+           * as a hostname or ip address.
            */
           if(setsockopt(sockfd, SOL_SOCKET, SO_BINDTODEVICE,
                         dev, (curl_socklen_t)strlen(dev)+1) != 0) {
@@ -313,11 +359,14 @@ static CURLcode bindlocal(struct connectdata *conn,
                   " will do regular bind\n",
                   dev, error, Curl_strerror(conn, error));
             /* This is typically "errno 1, error: Operation not permitted" if
-           you're not running as root or another suitable privileged user */
+               you're not running as root or another suitable privileged
+               user */
           }
 #endif
+          break;
       }
-    else {
+    }
+    if(!is_interface) {
       /*
        * This was not an interface, resolve the name as a host name
        * or IP number
@@ -361,10 +410,24 @@ static CURLcode bindlocal(struct connectdata *conn,
     if(done > 0) {
 #ifdef ENABLE_IPV6
       /* ipv6 address */
-      if((af == AF_INET6) &&
-         (Curl_inet_pton(AF_INET6, myhost, &si6->sin6_addr) > 0)) {
+      if(af == AF_INET6) {
+#ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID
+        char *scope_ptr = strchr(myhost, '%');
+        if(scope_ptr)
+          *(scope_ptr++) = 0;
+#endif
+        if(Curl_inet_pton(AF_INET6, myhost, &si6->sin6_addr) > 0) {
           si6->sin6_family = AF_INET6;
           si6->sin6_port = htons(port);
+#ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID
+          if(scope_ptr)
+            /* The "myhost" string either comes from Curl_if2ip or from
+               Curl_printable_address. The latter returns only numeric scope
+               IDs and the former returns none at all.  So the scope ID, if
+               present, is known to be numeric */
+            si6->sin6_scope_id = atoi(scope_ptr);
+#endif
+        }
         sizeof_sa = sizeof(struct sockaddr_in6);
       }
       else
@@ -825,13 +888,35 @@ static void nosigpipe(struct connectdata *conn,
    Work-around: Make the Socket Send Buffer Size Larger Than the Program Send
    Buffer Size
 
+   The problem described in this knowledge-base is applied only to pre-Vista
+   Windows.  Following function trying to detect OS version and skips
+   SO_SNDBUF adjustment for Windows Vista and above.
 */
+#define DETECT_OS_NONE 0
+#define DETECT_OS_PREVISTA 1
+#define DETECT_OS_VISTA_OR_LATER 2
+
 void Curl_sndbufset(curl_socket_t sockfd)
 {
   int val = CURL_MAX_WRITE_SIZE + 32;
   int curval = 0;
   int curlen = sizeof(curval);
 
+  OSVERSIONINFO osver;
+  static int detectOsState = DETECT_OS_NONE;
+
+  if(detectOsState == DETECT_OS_NONE) {
+    memset(&osver, 0, sizeof(osver));
+    osver.dwOSVersionInfoSize = sizeof(osver);
+    detectOsState = DETECT_OS_PREVISTA;
+    if(GetVersionEx(&osver)) {
+      if(osver.dwMajorVersion >= 6)
+        detectOsState = DETECT_OS_VISTA_OR_LATER;
+    }
+  }
+  if(detectOsState == DETECT_OS_VISTA_OR_LATER)
+    return;
+
   if(getsockopt(sockfd, SOL_SOCKET, SO_SNDBUF, (char *)&curval, &curlen) == 0)
     if(curval > val)
       return;
@@ -917,6 +1002,11 @@ singleipconnect(struct connectdata *conn,
   res = bindlocal(conn, sockfd, addr.family);
   if(res) {
     Curl_closesocket(conn, sockfd); /* close socket and bail out */
+    if(res == CURLE_UNSUPPORTED_PROTOCOL) {
+      /* The address family is not supported on this interface.
+         We can continue trying addresses */
+      return CURLE_OK;
+    }
     return res;
   }
 
@@ -1054,7 +1144,7 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
 
   if(sockfd == CURL_SOCKET_BAD) {
     /* no good connect was made */
-    failf(data, "couldn't connect to %s at %s:%d",
+    failf(data, "couldn't connect to %s at %s:%ld",
           conn->bits.proxy?"proxy":"host",
           conn->bits.proxy?conn->proxy.name:conn->host.name, conn->port);
     return CURLE_COULDNT_CONNECT;
@@ -1161,7 +1251,13 @@ int Curl_closesocket(struct connectdata *conn,
     else
       return conn->fclosesocket(conn->closesocket_client, sock);
   }
-  return sclose(sock);
+  sclose(sock);
+
+  if(conn)
+    /* tell the multi-socket code about this */
+    Curl_multi_closed(conn, sock);
+
+  return 0;
 }
 
 /*

lib/cookie.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -89,6 +89,7 @@ Example set of cookies:
 #include "strequal.h"
 #include "strtok.h"
 #include "sendf.h"
+#include "slist.h"
 #include "curl_memory.h"
 #include "share.h"
 #include "strtoofft.h"
@@ -106,6 +107,8 @@ static void freecookie(struct Cookie *co)
     free(co->domain);
   if(co->path)
     free(co->path);
+  if(co->spath)
+    free(co->spath);
   if(co->name)
     free(co->name);
   if(co->value)
@@ -118,15 +121,139 @@ static void freecookie(struct Cookie *co)
   free(co);
 }
 
-static bool tailmatch(const char *little, const char *bigone)
+static bool tailmatch(const char *cooke_domain, const char *hostname)
 {
-  size_t littlelen = strlen(little);
-  size_t biglen = strlen(bigone);
+  size_t cookie_domain_len = strlen(cooke_domain);
+  size_t hostname_len = strlen(hostname);
 
-  if(littlelen > biglen)
+  if(hostname_len < cookie_domain_len)
     return FALSE;
 
-  return Curl_raw_equal(little, bigone+biglen-littlelen) ? TRUE : FALSE;
+  if(!Curl_raw_equal(cooke_domain, hostname+hostname_len-cookie_domain_len))
+    return FALSE;
+
+  /* A lead char of cookie_domain is not '.'.
+     RFC6265 4.1.2.3. The Domain Attribute says:
+       For example, if the value of the Domain attribute is
+       "example.com", the user agent will include the cookie in the Cookie
+       header when making HTTP requests to example.com, www.example.com, and
+       www.corp.example.com.
+   */
+  if(hostname_len == cookie_domain_len)
+    return TRUE;
+  if('.' == *(hostname + hostname_len - cookie_domain_len - 1))
+    return TRUE;
+  return FALSE;
+}
+
+/*
+ * matching cookie path and url path
+ * RFC6265 5.1.4 Paths and Path-Match
+ */
+static bool pathmatch(const char* cookie_path, const char* request_uri)
+{
+  size_t cookie_path_len;
+  size_t uri_path_len;
+  char* uri_path = NULL;
+  char* pos;
+  bool ret = FALSE;
+
+  /* cookie_path must not have last '/' separator. ex: /sample */
+  cookie_path_len = strlen(cookie_path);
+  if(1 == cookie_path_len) {
+    /* cookie_path must be '/' */
+    return TRUE;
+  }
+
+  uri_path = strdup(request_uri);
+  if(!uri_path)
+    return FALSE;
+  pos = strchr(uri_path, '?');
+  if(pos)
+    *pos = 0x0;
+
+  /* #-fragments are already cut off! */
+  if(0 == strlen(uri_path) || uri_path[0] != '/') {
+    free(uri_path);
+    uri_path = strdup("/");
+    if(!uri_path)
+      return FALSE;
+  }
+
+  /* here, RFC6265 5.1.4 says
+     4. Output the characters of the uri-path from the first character up
+        to, but not including, the right-most %x2F ("/").
+     but URL path /hoge?fuga=xxx means /hoge/index.cgi?fuga=xxx in some site
+     without redirect.
+     Ignore this algorithm because /hoge is uri path for this case
+     (uri path is not /).
+   */
+
+  uri_path_len = strlen(uri_path);
+
+  if(uri_path_len < cookie_path_len) {
+    ret = FALSE;
+    goto pathmatched;
+  }
+
+  /* not using checkprefix() because matching should be case-sensitive */
+  if(strncmp(cookie_path, uri_path, cookie_path_len)) {
+    ret = FALSE;
+    goto pathmatched;
+  }
+
+  /* The cookie-path and the uri-path are identical. */
+  if(cookie_path_len == uri_path_len) {
+    ret = TRUE;
+    goto pathmatched;
+  }
+
+  /* here, cookie_path_len < url_path_len */
+  if(uri_path[cookie_path_len] == '/') {
+    ret = TRUE;
+    goto pathmatched;
+  }
+
+  ret = FALSE;
+
+pathmatched:
+  free(uri_path);
+  return ret;
+}
+
+/*
+ * cookie path sanitize
+ */
+static char *sanitize_cookie_path(const char *cookie_path)
+{
+  size_t len;
+  char *new_path = strdup(cookie_path);
+  if(!new_path)
+    return NULL;
+
+  /* some stupid site sends path attribute with '"'. */
+  if(new_path[0] == '\"') {
+    memmove((void *)new_path, (const void *)(new_path + 1), strlen(new_path));
+  }
+  if(new_path[strlen(new_path) - 1] == '\"') {
+    new_path[strlen(new_path) - 1] = 0x0;
+  }
+
+  /* RFC6265 5.2.4 The Path Attribute */
+  if(new_path[0] != '/') {
+    /* Let cookie-path be the default-path. */
+    free(new_path);
+    new_path = strdup("/");
+    return new_path;
+  }
+
+  /* convert /hoge/ to /hoge */
+  len = strlen(new_path);
+  if(1 < len && new_path[len - 1] == '/') {
+    new_path[len - 1] = 0x0;
+  }
+
+  return new_path;
 }
 
 /*
@@ -170,6 +297,9 @@ static void strstore(char **str, const char *newstr)
  *
  * Add a single cookie line to the cookie keeping object.
  *
+ * Be aware that sometimes we get an IP-only host name, and that might also be
+ * a numerical IPv6 address.
+ *
  ***************************************************************************/
 
 struct Cookie *
@@ -274,45 +404,13 @@ Curl_cookie_add(struct SessionHandle *data,
             badcookie = TRUE; /* out of memory bad */
             break;
           }
+          co->spath = sanitize_cookie_path(co->path);
+          if(!co->spath) {
+            badcookie = TRUE; /* out of memory bad */
+            break;
+          }
         }
         else if(Curl_raw_equal("domain", name)) {
-          /* note that this name may or may not have a preceding dot, but
-             we don't care about that, we treat the names the same anyway */
-
-          const char *domptr=whatptr;
-          const char *nextptr;
-          int dotcount=1;
-
-          /* Count the dots, we need to make sure that there are enough
-             of them. */
-
-          if('.' == whatptr[0])
-            /* don't count the initial dot, assume it */
-            domptr++;
-
-          do {
-            nextptr = strchr(domptr, '.');
-            if(nextptr) {
-              if(domptr != nextptr)
-                dotcount++;
-              domptr = nextptr+1;
-            }
-          } while(nextptr);
-
-          /* The original Netscape cookie spec defined that this domain name
-             MUST have three dots (or two if one of the seven holy TLDs),
-             but it seems that these kinds of cookies are in use "out there"
-             so we cannot be that strict. I've therefore lowered the check
-             to not allow less than two dots. */
-
-          if(dotcount < 2) {
-            /* Received and skipped a cookie with a domain using too few
-               dots. */
-            badcookie=TRUE; /* mark this as a bad cookie */
-            infof(data, "skipped cookie with illegal dotcount domain: %s\n",
-                  whatptr);
-          }
-          else {
           /* Now, we make sure that our host is within the given domain,
              or the given domain is not valid and thus cannot be set. */
 
@@ -341,7 +439,6 @@ Curl_cookie_add(struct SessionHandle *data,
                   whatptr);
           }
         }
-        }
         else if(Curl_raw_equal("version", name)) {
           strstore(&co->version, whatptr);
           if(!co->version) {
@@ -447,6 +544,9 @@ Curl_cookie_add(struct SessionHandle *data,
         if(co->path) {
           memcpy(co->path, path, pathlen);
           co->path[pathlen]=0; /* zero terminate */
+          co->spath = sanitize_cookie_path(co->path);
+          if(!co->spath)
+            badcookie = TRUE; /* out of memory bad */
         }
         else
           badcookie = TRUE;
@@ -498,12 +598,6 @@ Curl_cookie_add(struct SessionHandle *data,
 
     firstptr=strtok_r(lineptr, "\t", &tok_buf); /* tokenize it on the TAB */
 
-    /* Here's a quick check to eliminate normal HTTP-headers from this */
-    if(!firstptr || strchr(firstptr, ':')) {
-      free(co);
-      return NULL;
-    }
-
     /* Now loop through the fields and init the struct we already have
        allocated */
     for(ptr=firstptr, fields=0; ptr && !badcookie;
@@ -538,12 +632,21 @@ Curl_cookie_add(struct SessionHandle *data,
           co->path = strdup(ptr);
           if(!co->path)
             badcookie = TRUE;
+          else {
+            co->spath = sanitize_cookie_path(co->path);
+            if(!co->spath) {
+              badcookie = TRUE; /* out of memory bad */
+            }
+          }
           break;
         }
         /* this doesn't look like a path, make one up! */
         co->path = strdup("/");
         if(!co->path)
           badcookie = TRUE;
+        co->spath = strdup("/");
+        if(!co->spath)
+          badcookie = TRUE;
         fields++; /* add a field and fall down to secure */
         /* FALLTHROUGH */
       case 3:
@@ -614,14 +717,14 @@ Curl_cookie_add(struct SessionHandle *data,
       if(replace_old) {
         /* the domains were identical */
 
-        if(clist->path && co->path) {
-          if(Curl_raw_equal(clist->path, co->path)) {
+        if(clist->spath && co->spath) {
+          if(Curl_raw_equal(clist->spath, co->spath)) {
             replace_old = TRUE;
           }
           else
             replace_old = FALSE;
         }
-        else if(!clist->path && !co->path)
+        else if(!clist->spath && !co->spath)
           replace_old = TRUE;
         else
           replace_old = FALSE;
@@ -650,6 +753,8 @@ Curl_cookie_add(struct SessionHandle *data,
           free(clist->domain);
         if(clist->path)
           free(clist->path);
+        if(clist->spath)
+          free(clist->spath);
         if(clist->expirestr)
           free(clist->expirestr);
 
@@ -689,9 +794,9 @@ Curl_cookie_add(struct SessionHandle *data,
       lastc->next = co;
     else
       c->cookies = co;
+    c->numcookies++; /* one more cookie in the jar */
   }
 
-  c->numcookies++; /* one more cookie in the jar */
   return co;
 }
 
@@ -777,11 +882,28 @@ static int cookie_sort(const void *p1, const void *p2)
 {
   struct Cookie *c1 = *(struct Cookie **)p1;
   struct Cookie *c2 = *(struct Cookie **)p2;
+  size_t l1, l2;
 
-  size_t l1 = c1->path?strlen(c1->path):0;
-  size_t l2 = c2->path?strlen(c2->path):0;
+  /* 1 - compare cookie path lengths */
+  l1 = c1->path ? strlen(c1->path) : 0;
+  l2 = c2->path ? strlen(c2->path) : 0;
 
-  return (l2 > l1) ? 1 : (l2 < l1) ? -1 : 0 ;
+  if(l1 != l2)
+    return (l2 > l1) ? 1 : -1 ; /* avoid size_t <=> int conversions */
+
+  /* 2 - compare cookie domain lengths */
+  l1 = c1->domain ? strlen(c1->domain) : 0;
+  l2 = c2->domain ? strlen(c2->domain) : 0;
+
+  if(l1 != l2)
+    return (l2 > l1) ? 1 : -1 ;  /* avoid size_t <=> int conversions */
+
+  /* 3 - compare cookie names */
+  if(c1->name && c2->name)
+    return strcmp(c1->name, c2->name);
+
+  /* sorry, can't be more deterministic */
+  return 0;
 }
 
 /*****************************************************************************
@@ -827,10 +949,7 @@ struct Cookie *Curl_cookie_getlist(struct CookieInfo *c,
 
         /* now check the left part of the path with the cookies path
            requirement */
-        if(!co->path ||
-           /* not using checkprefix() because matching should be
-              case-sensitive */
-           !strncmp(co->path, path, strlen(co->path)) ) {
+        if(!co->spath || pathmatch(co->spath, path) ) {
 
           /* and now, we know this is a match and we should create an
              entry for the return-linked-list */
@@ -1114,9 +1233,9 @@ struct curl_slist *Curl_cookie_list(struct SessionHandle *data)
       curl_slist_free_all(list);
       return NULL;
     }
-    beg = curl_slist_append(list, line);
-    free(line);
+    beg = Curl_slist_append_nodup(list, line);
     if(!beg) {
+      free(line);
       curl_slist_free_all(list);
       return NULL;
     }

lib/cookie.h

@@ -29,7 +29,8 @@ struct Cookie {
   struct Cookie *next; /* next in the chain */
   char *name;        /* <this> = value */
   char *value;       /* name = <this> */
-  char *path;         /* path = <this> */
+  char *path;         /* path = <this> which is in Set-Cookie: */
+  char *spath;        /* sanitized cookie path */
   char *domain;      /* domain = <this> */
   curl_off_t expires;  /* expires = <this> */
   char *expirestr;   /* the plain text version */

lib/curl_darwinssl.c

@@ -38,9 +38,54 @@
 #include <Security/SecureTransport.h>
 #include <CoreFoundation/CoreFoundation.h>
 #include <CommonCrypto/CommonDigest.h>
+
+/* The Security framework has changed greatly between iOS and different OS X
+   versions, and we will try to support as many of them as we can (back to
+   Leopard and iOS 5) by using macros and weak-linking.
+
+   IMPORTANT: If TLS 1.1 and 1.2 support are important for you on OS X, then
+   you must build this project against the 10.8 SDK or later. */
 #if (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE))
+
+#if MAC_OS_X_VERSION_MAX_ALLOWED < 1050
+#error "The darwinssl back-end requires Leopard or later."
+#endif /* MAC_OS_X_VERSION_MAX_ALLOWED < 1050 */
+
+#define CURL_BUILD_IOS 0
+#define CURL_BUILD_MAC 1
+/* This is the maximum API level we are allowed to use when building: */
+#define CURL_BUILD_MAC_10_5 MAC_OS_X_VERSION_MAX_ALLOWED >= 1050
+#define CURL_BUILD_MAC_10_6 MAC_OS_X_VERSION_MAX_ALLOWED >= 1060
+#define CURL_BUILD_MAC_10_7 MAC_OS_X_VERSION_MAX_ALLOWED >= 1070
+#define CURL_BUILD_MAC_10_8 MAC_OS_X_VERSION_MAX_ALLOWED >= 1080
+/* These macros mean "the following code is present to allow runtime backward
+   compatibility with at least this cat or earlier":
+   (You set this at build-time by setting the MACOSX_DEPLOYMENT_TARGET
+   environmental variable.) */
+#define CURL_SUPPORT_MAC_10_5 MAC_OS_X_VERSION_MIN_REQUIRED <= 1050
+#define CURL_SUPPORT_MAC_10_6 MAC_OS_X_VERSION_MIN_REQUIRED <= 1060
+#define CURL_SUPPORT_MAC_10_7 MAC_OS_X_VERSION_MIN_REQUIRED <= 1070
+#define CURL_SUPPORT_MAC_10_8 MAC_OS_X_VERSION_MIN_REQUIRED <= 1080
+
+#elif TARGET_OS_EMBEDDED || TARGET_OS_IPHONE
+#define CURL_BUILD_IOS 1
+#define CURL_BUILD_MAC 0
+#define CURL_BUILD_MAC_10_5 0
+#define CURL_BUILD_MAC_10_6 0
+#define CURL_BUILD_MAC_10_7 0
+#define CURL_BUILD_MAC_10_8 0
+#define CURL_SUPPORT_MAC_10_5 0
+#define CURL_SUPPORT_MAC_10_6 0
+#define CURL_SUPPORT_MAC_10_7 0
+#define CURL_SUPPORT_MAC_10_8 0
+
+#else
+#error "The darwinssl back-end requires iOS or OS X."
+#endif /* (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE)) */
+
+#if CURL_BUILD_MAC
 #include <sys/sysctl.h>
-#endif
+#endif /* CURL_BUILD_MAC */
 
 #include "urldata.h"
 #include "sendf.h"
@@ -59,16 +104,7 @@
 
 /* From MacTypes.h (which we can't include because it isn't present in iOS: */
 #define ioErr -36
-
-/* In Mountain Lion and iOS 5, Apple made some changes to the API. They
-   added TLS 1.1 and 1.2 support, and deprecated and replaced some
-   functions. You need to build against the Mountain Lion or iOS 5 SDK
-   or later to get TLS 1.1 or 1.2 support working in cURL. We'll weak-link
-   to the newer functions and use them if present in the user's OS.
-
-   Builders: If you want TLS 1.1 and 1.2 but still want to retain support
-   for older cats, don't forget to set the MACOSX_DEPLOYMENT_TARGET
-   environmental variable prior to building cURL. */
+#define paramErr -50
 
 /* The following two functions were ripped from Apple sample code,
  * with some modifications: */
@@ -97,8 +133,8 @@ static OSStatus SocketRead(SSLConnectionRef connection,
     if(rrtn <= 0) {
       /* this is guesswork... */
       theErr = errno;
-      if((rrtn == 0) && (theErr == 0)) {
-        /* try fix for iSync */
+      if(rrtn == 0) { /* EOF = server hung up */
+        /* the framework will turn this into errSSLClosedNoNotify */
         rtn = errSSLClosedGraceful;
       }
       else /* do the switch */
@@ -360,6 +396,7 @@ CF_INLINE const char *TLSCipherNameForNumber(SSLCipherSuite cipher) {
     case TLS_DH_anon_WITH_AES_256_CBC_SHA:
       return "TLS_DH_anon_WITH_AES_256_CBC_SHA";
       break;
+#if CURL_BUILD_MAC_10_6 || CURL_BUILD_IOS
     /* TLS 1.0 with ECDSA (RFC 4492) */
     case TLS_ECDH_ECDSA_WITH_NULL_SHA:
       return "TLS_ECDH_ECDSA_WITH_NULL_SHA";
@@ -436,7 +473,8 @@ CF_INLINE const char *TLSCipherNameForNumber(SSLCipherSuite cipher) {
     case TLS_ECDH_anon_WITH_AES_256_CBC_SHA:
       return "TLS_ECDH_anon_WITH_AES_256_CBC_SHA";
       break;
-#if defined(__MAC_10_8) || defined(__IPHONE_5_0)
+#endif /* CURL_BUILD_MAC_10_6 || CURL_BUILD_IOS */
+#if CURL_BUILD_MAC_10_8 || CURL_BUILD_IOS
     /* TLS 1.2 (RFC 5246) */
     case TLS_RSA_WITH_NULL_MD5:
       return "TLS_RSA_WITH_NULL_MD5";
@@ -621,44 +659,164 @@ CF_INLINE const char *TLSCipherNameForNumber(SSLCipherSuite cipher) {
     case SSL_DH_anon_WITH_3DES_EDE_CBC_SHA:
       return "TLS_DH_anon_WITH_3DES_EDE_CBC_SHA";
       break;
-#endif /* defined(__MAC_10_8) || defined(__IPHONE_5_0) */
+#endif /* CURL_BUILD_MAC_10_8 || CURL_BUILD_IOS */
   }
   return "TLS_NULL_WITH_NULL_NULL";
 }
 
-CF_INLINE bool IsRunningMountainLionOrLater(void)
+#if CURL_BUILD_MAC
+CF_INLINE void GetDarwinVersionNumber(int *major, int *minor)
 {
-#if (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE))
   int mib[2];
   char *os_version;
   size_t os_version_len;
-  char *os_version_major/*, *os_version_minor, *os_version_point*/;
-  int os_version_major_int;
+  char *os_version_major, *os_version_minor/*, *os_version_point*/;
 
   /* Get the Darwin kernel version from the kernel using sysctl(): */
   mib[0] = CTL_KERN;
   mib[1] = KERN_OSRELEASE;
   if(sysctl(mib, 2, NULL, &os_version_len, NULL, 0) == -1)
-    return false;
+    return;
   os_version = malloc(os_version_len*sizeof(char));
   if(!os_version)
-    return false;
+    return;
   if(sysctl(mib, 2, os_version, &os_version_len, NULL, 0) == -1) {
     free(os_version);
-    return false;
+    return;
   }
 
-  /* Parse the version. If it's version 12.0.0 or later, then this user is
-     using Mountain Lion. */
+  /* Parse the version: */
   os_version_major = strtok(os_version, ".");
-  /*os_version_minor = strtok(NULL, ".");
-  os_version_point = strtok(NULL, ".");*/
-  os_version_major_int = atoi(os_version_major);
+  os_version_minor = strtok(NULL, ".");
+  /*os_version_point = strtok(NULL, ".");*/
+  *major = atoi(os_version_major);
+  *minor = atoi(os_version_minor);
   free(os_version);
-  return os_version_major_int >= 12;
+}
+#endif /* CURL_BUILD_MAC */
+
+/* Apple provides a myriad of ways of getting information about a certificate
+   into a string. Some aren't available under iOS or newer cats. So here's
+   a unified function for getting a string describing the certificate that
+   ought to work in all cats starting with Leopard. */
+CF_INLINE CFStringRef CopyCertSubject(SecCertificateRef cert)
+{
+  CFStringRef server_cert_summary = CFSTR("(null)");
+
+#if CURL_BUILD_IOS
+  /* iOS: There's only one way to do this. */
+  server_cert_summary = SecCertificateCopySubjectSummary(cert);
 #else
-  return true;  /* iOS users: this doesn't concern you */
-#endif
+#if CURL_BUILD_MAC_10_7
+  /* Lion & later: Get the long description if we can. */
+  if(SecCertificateCopyLongDescription != NULL)
+    server_cert_summary =
+      SecCertificateCopyLongDescription(NULL, cert, NULL);
+  else
+#endif /* CURL_BUILD_MAC_10_7 */
+#if CURL_BUILD_MAC_10_6
+  /* Snow Leopard: Get the certificate summary. */
+  if(SecCertificateCopySubjectSummary != NULL)
+    server_cert_summary = SecCertificateCopySubjectSummary(cert);
+  else
+#endif /* CURL_BUILD_MAC_10_6 */
+  /* Leopard is as far back as we go... */
+  (void)SecCertificateCopyCommonName(cert, &server_cert_summary);
+#endif /* CURL_BUILD_IOS */
+  return server_cert_summary;
+}
+
+#if CURL_SUPPORT_MAC_10_7
+/* The SecKeychainSearch API was deprecated in Lion, and using it will raise
+   deprecation warnings, so let's not compile this unless it's necessary: */
+static OSStatus CopyIdentityWithLabelOldSchool(char *label,
+                                               SecIdentityRef *out_c_a_k)
+{
+  OSStatus status = errSecItemNotFound;
+  SecKeychainAttributeList attr_list;
+  SecKeychainAttribute attr;
+  SecKeychainSearchRef search = NULL;
+  SecCertificateRef cert = NULL;
+
+  /* Set up the attribute list: */
+  attr_list.count = 1L;
+  attr_list.attr = &attr;
+
+  /* Set up our lone search criterion: */
+  attr.tag = kSecLabelItemAttr;
+  attr.data = label;
+  attr.length = (UInt32)strlen(label);
+
+  /* Start searching: */
+  status = SecKeychainSearchCreateFromAttributes(NULL,
+                                                 kSecCertificateItemClass,
+                                                 &attr_list,
+                                                 &search);
+  if(status == noErr) {
+    status = SecKeychainSearchCopyNext(search,
+                                       (SecKeychainItemRef *)&cert);
+    if(status == noErr && cert) {
+      /* If we found a certificate, does it have a private key? */
+      status = SecIdentityCreateWithCertificate(NULL, cert, out_c_a_k);
+      CFRelease(cert);
+    }
+  }
+
+  if(search)
+    CFRelease(search);
+  return status;
+}
+#endif /* CURL_SUPPORT_MAC_10_7 */
+
+static OSStatus CopyIdentityWithLabel(char *label,
+                                      SecIdentityRef *out_cert_and_key)
+{
+  OSStatus status = errSecItemNotFound;
+
+#if CURL_BUILD_MAC_10_7 || CURL_BUILD_IOS
+  /* SecItemCopyMatching() was introduced in iOS and Snow Leopard.
+     kSecClassIdentity was introduced in Lion. If both exist, let's use them
+     to find the certificate. */
+  if(SecItemCopyMatching != NULL && kSecClassIdentity != NULL) {
+    CFTypeRef keys[4];
+    CFTypeRef values[4];
+    CFDictionaryRef query_dict;
+    CFStringRef label_cf = CFStringCreateWithCString(NULL, label,
+      kCFStringEncodingUTF8);
+
+    /* Set up our search criteria and expected results: */
+    values[0] = kSecClassIdentity; /* we want a certificate and a key */
+    keys[0] = kSecClass;
+    values[1] = kCFBooleanTrue;    /* we want a reference */
+    keys[1] = kSecReturnRef;
+    values[2] = kSecMatchLimitOne; /* one is enough, thanks */
+    keys[2] = kSecMatchLimit;
+    /* identity searches need a SecPolicyRef in order to work */
+    values[3] = SecPolicyCreateSSL(false, label_cf);
+    keys[3] = kSecMatchPolicy;
+    query_dict = CFDictionaryCreate(NULL, (const void **)keys,
+                                   (const void **)values, 4L,
+                                   &kCFCopyStringDictionaryKeyCallBacks,
+                                   &kCFTypeDictionaryValueCallBacks);
+    CFRelease(values[3]);
+    CFRelease(label_cf);
+
+    /* Do we have a match? */
+    status = SecItemCopyMatching(query_dict, (CFTypeRef *)out_cert_and_key);
+    CFRelease(query_dict);
+  }
+  else {
+#if CURL_SUPPORT_MAC_10_7
+    /* On Leopard and Snow Leopard, fall back to SecKeychainSearch. */
+    status = CopyIdentityWithLabelOldSchool(label, out_cert_and_key);
+#endif /* CURL_SUPPORT_MAC_10_7 */
+  }
+#elif CURL_SUPPORT_MAC_10_7
+  /* For developers building on older cats, we have no choice but to fall back
+     to SecKeychainSearch. */
+  status = CopyIdentityWithLabelOldSchool(label, out_cert_and_key);
+#endif /* CURL_BUILD_MAC_10_7 || CURL_BUILD_IOS */
+  return status;
 }
 
 static CURLcode darwinssl_connect_step1(struct connectdata *conn,
@@ -671,11 +829,19 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
   struct in6_addr addr;
 #else
   struct in_addr addr;
-#endif
-  /*SSLConnectionRef ssl_connection;*/
+#endif /* ENABLE_IPV6 */
+  size_t all_ciphers_count = 0UL, allowed_ciphers_count = 0UL, i;
+  SSLCipherSuite *all_ciphers = NULL, *allowed_ciphers = NULL;
+  char *ssl_sessionid;
+  size_t ssl_sessionid_len;
   OSStatus err = noErr;
+#if CURL_BUILD_MAC
+  int darwinver_maj = 0, darwinver_min = 0;
 
-#if defined(__MAC_10_8) || defined(__IPHONE_5_0)
+  GetDarwinVersionNumber(&darwinver_maj, &darwinver_min);
+#endif /* CURL_BUILD_MAC */
+
+#if CURL_BUILD_MAC_10_8 || CURL_BUILD_IOS
   if(SSLCreateContext != NULL) {  /* use the newer API if avaialble */
     if(connssl->ssl_ctx)
       CFRelease(connssl->ssl_ctx);
@@ -687,7 +853,7 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
   }
   else {
   /* The old ST API does not exist under iOS, so don't compile it: */
-#if (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE))
+#if CURL_SUPPORT_MAC_10_8
     if(connssl->ssl_ctx)
       (void)SSLDisposeContext(connssl->ssl_ctx);
     err = SSLNewContext(false, &(connssl->ssl_ctx));
@@ -695,7 +861,7 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
       failf(data, "SSL: couldn't create a context: OSStatus %d", err);
       return CURLE_OUT_OF_MEMORY;
     }
-#endif /* (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE)) */
+#endif /* CURL_SUPPORT_MAC_10_8 */
   }
 #else
   if(connssl->ssl_ctx)
@@ -705,10 +871,11 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
     failf(data, "SSL: couldn't create a context: OSStatus %d", err);
     return CURLE_OUT_OF_MEMORY;
   }
-#endif /* defined(__MAC_10_8) || defined(__IPHONE_5_0) */
+#endif /* CURL_BUILD_MAC_10_8 || CURL_BUILD_IOS */
+  connssl->ssl_write_buffered_length = 0UL; /* reset buffered write length */
 
   /* check to see if we've been told to use an explicit SSL/TLS version */
-#if defined(__MAC_10_8) || defined(__IPHONE_5_0)
+#if CURL_BUILD_MAC_10_8 || CURL_BUILD_IOS
   if(SSLSetProtocolVersionMax != NULL) {
     switch(data->set.ssl.version) {
       case CURL_SSLVERSION_DEFAULT: default:
@@ -724,12 +891,16 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
         (void)SSLSetProtocolVersionMax(connssl->ssl_ctx, kSSLProtocol3);
         break;
       case CURL_SSLVERSION_SSLv2:
-        (void)SSLSetProtocolVersionMin(connssl->ssl_ctx, kSSLProtocol2);
+        err = SSLSetProtocolVersionMin(connssl->ssl_ctx, kSSLProtocol2);
+        if(err != noErr) {
+          failf(data, "Your version of the OS does not support SSLv2");
+          return CURLE_SSL_CONNECT_ERROR;
+        }
         (void)SSLSetProtocolVersionMax(connssl->ssl_ctx, kSSLProtocol2);
     }
   }
   else {
-#if (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE))
+#if CURL_SUPPORT_MAC_10_8
     (void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
                                        kSSLProtocolAll,
                                        false);
@@ -765,12 +936,16 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
                                            true);
         break;
       case CURL_SSLVERSION_SSLv2:
-        (void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
+        err = SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
                                            kSSLProtocol2,
                                            true);
+        if(err != noErr) {
+          failf(data, "Your version of the OS does not support SSLv2");
+          return CURLE_SSL_CONNECT_ERROR;
+        }
         break;
     }
-#endif  /* (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE)) */
+#endif  /* CURL_SUPPORT_MAC_10_8 */
   }
 #else
   (void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx, kSSLProtocolAll, false);
@@ -790,9 +965,13 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
                                          true);
       break;
     case CURL_SSLVERSION_SSLv2:
-      (void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
+      err = SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
                                          kSSLProtocol2,
                                          true);
+      if(err != noErr) {
+        failf(data, "Your version of the OS does not support SSLv2");
+        return CURLE_SSL_CONNECT_ERROR;
+      }
       break;
     case CURL_SSLVERSION_SSLv3:
       (void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
@@ -800,16 +979,65 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
                                          true);
       break;
   }
-#endif /* defined(__MAC_10_8) || defined(__IPHONE_5_0) */
+#endif /* CURL_BUILD_MAC_10_8 || CURL_BUILD_IOS */
 
-  /* No need to load certificates here. SecureTransport uses the Keychain
-   * (which is also part of the Security framework) to evaluate trust. */
+  if(data->set.str[STRING_KEY]) {
+    infof(data, "WARNING: SSL: CURLOPT_SSLKEY is ignored by Secure "
+                "Transport. The private key must be in the Keychain.\n");
+  }
+
+  if(data->set.str[STRING_CERT]) {
+    SecIdentityRef cert_and_key = NULL;
+
+    /* User wants to authenticate with a client cert. Look for it: */
+    err = CopyIdentityWithLabel(data->set.str[STRING_CERT], &cert_and_key);
+    if(err == noErr) {
+      SecCertificateRef cert = NULL;
+      CFTypeRef certs_c[1];
+      CFArrayRef certs;
+
+      /* If we found one, print it out: */
+      err = SecIdentityCopyCertificate(cert_and_key, &cert);
+      if(err == noErr) {
+        CFStringRef cert_summary = CopyCertSubject(cert);
+        char cert_summary_c[128];
+
+        if(cert_summary) {
+          memset(cert_summary_c, 0, 128);
+          if(CFStringGetCString(cert_summary,
+                                cert_summary_c,
+                                128,
+                                kCFStringEncodingUTF8)) {
+            infof(data, "Client certificate: %s\n", cert_summary_c);
+          }
+          CFRelease(cert_summary);
+          CFRelease(cert);
+        }
+      }
+      certs_c[0] = cert_and_key;
+      certs = CFArrayCreate(NULL, (const void **)certs_c, 1L,
+                            &kCFTypeArrayCallBacks);
+      err = SSLSetCertificate(connssl->ssl_ctx, certs);
+      if(certs)
+        CFRelease(certs);
+      if(err != noErr) {
+        failf(data, "SSL: SSLSetCertificate() failed: OSStatus %d", err);
+        return CURLE_SSL_CERTPROBLEM;
+      }
+      CFRelease(cert_and_key);
+    }
+    else {
+      failf(data, "SSL: Can't find the certificate \"%s\" and its private key "
+                  "in the Keychain.", data->set.str[STRING_CERT]);
+      return CURLE_SSL_CERTPROBLEM;
+    }
+  }
 
   /* SSL always tries to verify the peer, this only says whether it should
    * fail to connect if the verification fails, or if it should continue
    * anyway. In the latter case the result of the verification is checked with
    * SSL_get_verify_result() below. */
-#if defined(__MAC_10_6) || defined(__IPHONE_5_0)
+#if CURL_BUILD_MAC_10_6 || CURL_BUILD_IOS
   /* Snow Leopard introduced the SSLSetSessionOption() function, but due to
      a library bug with the way the kSSLSessionOptionBreakOnServerAuth flag
      works, it doesn't work as expected under Snow Leopard or Lion.
@@ -817,7 +1045,12 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
      to disable certificate validation if the user turned that off.
      (SecureTransport will always validate the certificate chain by
      default.) */
-  if(SSLSetSessionOption != NULL && IsRunningMountainLionOrLater()) {
+  /* (Note: Darwin 12.x.x is Mountain Lion.) */
+#if CURL_BUILD_MAC
+  if(SSLSetSessionOption != NULL && darwinver_maj >= 12) {
+#else
+  if(SSLSetSessionOption != NULL) {
+#endif /* CURL_BUILD_MAC */
     err = SSLSetSessionOption(connssl->ssl_ctx,
                               kSSLSessionOptionBreakOnServerAuth,
                               data->set.ssl.verifypeer?false:true);
@@ -827,14 +1060,14 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
     }
   }
   else {
-#if (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE))
+#if CURL_SUPPORT_MAC_10_8
     err = SSLSetEnableCertVerify(connssl->ssl_ctx,
                                  data->set.ssl.verifypeer?true:false);
     if(err != noErr) {
       failf(data, "SSL: SSLSetEnableCertVerify() failed: OSStatus %d", err);
       return CURLE_SSL_CONNECT_ERROR;
     }
-#endif /* (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE)) */
+#endif /* CURL_SUPPORT_MAC_10_8 */
   }
 #else
   err = SSLSetEnableCertVerify(connssl->ssl_ctx,
@@ -843,7 +1076,7 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
     failf(data, "SSL: SSLSetEnableCertVerify() failed: OSStatus %d", err);
     return CURLE_SSL_CONNECT_ERROR;
   }
-#endif /* defined(__MAC_10_6) || defined(__IPHONE_5_0) */
+#endif /* CURL_BUILD_MAC_10_6 || CURL_BUILD_IOS */
 
   /* If this is a domain name and not an IP address, then configure SNI.
    * Also: the verifyhost setting influences SNI usage */
@@ -856,11 +1089,130 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
     err = SSLSetPeerDomainName(connssl->ssl_ctx, conn->host.name,
                                strlen(conn->host.name));
     if(err != noErr) {
-      infof(data, "WARNING: SSL: SSLSetPeerDomainName() failed: OSStatus %d",
+      infof(data, "WARNING: SSL: SSLSetPeerDomainName() failed: OSStatus %d\n",
             err);
     }
   }
 
+  /* Disable cipher suites that ST supports but are not safe. These ciphers
+     are unlikely to be used in any case since ST gives other ciphers a much
+     higher priority, but it's probably better that we not connect at all than
+     to give the user a false sense of security if the server only supports
+     insecure ciphers. (Note: We don't care about SSLv2-only ciphers.) */
+  (void)SSLGetNumberSupportedCiphers(connssl->ssl_ctx, &all_ciphers_count);
+  all_ciphers = malloc(all_ciphers_count*sizeof(SSLCipherSuite));
+  allowed_ciphers = malloc(all_ciphers_count*sizeof(SSLCipherSuite));
+  if(all_ciphers && allowed_ciphers &&
+     SSLGetSupportedCiphers(connssl->ssl_ctx, all_ciphers,
+       &all_ciphers_count) == noErr) {
+    for(i = 0UL ; i < all_ciphers_count ; i++) {
+#if CURL_BUILD_MAC
+     /* There's a known bug in early versions of Mountain Lion where ST's ECC
+        ciphers (cipher suite 0xC001 through 0xC032) simply do not work.
+        Work around the problem here by disabling those ciphers if we are
+        running in an affected version of OS X. */
+      if(darwinver_maj == 12 && darwinver_min <= 3 &&
+         all_ciphers[i] >= 0xC001 && all_ciphers[i] <= 0xC032) {
+           continue;
+      }
+#endif /* CURL_BUILD_MAC */
+      switch(all_ciphers[i]) {
+        /* Disable NULL ciphersuites: */
+        case SSL_NULL_WITH_NULL_NULL:
+        case SSL_RSA_WITH_NULL_MD5:
+        case SSL_RSA_WITH_NULL_SHA:
+        case SSL_FORTEZZA_DMS_WITH_NULL_SHA:
+        case 0xC001: /* TLS_ECDH_ECDSA_WITH_NULL_SHA */
+        case 0xC006: /* TLS_ECDHE_ECDSA_WITH_NULL_SHA */
+        case 0xC00B: /* TLS_ECDH_RSA_WITH_NULL_SHA */
+        case 0xC010: /* TLS_ECDHE_RSA_WITH_NULL_SHA */
+        /* Disable anonymous ciphersuites: */
+        case SSL_DH_anon_EXPORT_WITH_RC4_40_MD5:
+        case SSL_DH_anon_WITH_RC4_128_MD5:
+        case SSL_DH_anon_EXPORT_WITH_DES40_CBC_SHA:
+        case SSL_DH_anon_WITH_DES_CBC_SHA:
+        case SSL_DH_anon_WITH_3DES_EDE_CBC_SHA:
+        case TLS_DH_anon_WITH_AES_128_CBC_SHA:
+        case TLS_DH_anon_WITH_AES_256_CBC_SHA:
+        case 0xC015: /* TLS_ECDH_anon_WITH_NULL_SHA */
+        case 0xC016: /* TLS_ECDH_anon_WITH_RC4_128_SHA */
+        case 0xC017: /* TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA */
+        case 0xC018: /* TLS_ECDH_anon_WITH_AES_128_CBC_SHA */
+        case 0xC019: /* TLS_ECDH_anon_WITH_AES_256_CBC_SHA */
+        case 0x006C: /* TLS_DH_anon_WITH_AES_128_CBC_SHA256 */
+        case 0x006D: /* TLS_DH_anon_WITH_AES_256_CBC_SHA256 */
+        case 0x00A6: /* TLS_DH_anon_WITH_AES_128_GCM_SHA256 */
+        case 0x00A7: /* TLS_DH_anon_WITH_AES_256_GCM_SHA384 */
+        /* Disable weak key ciphersuites: */
+        case SSL_RSA_EXPORT_WITH_RC4_40_MD5:
+        case SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5:
+        case SSL_RSA_EXPORT_WITH_DES40_CBC_SHA:
+        case SSL_DH_DSS_EXPORT_WITH_DES40_CBC_SHA:
+        case SSL_DH_RSA_EXPORT_WITH_DES40_CBC_SHA:
+        case SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA:
+        case SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA:
+        case SSL_RSA_WITH_DES_CBC_SHA:
+        case SSL_DH_DSS_WITH_DES_CBC_SHA:
+        case SSL_DH_RSA_WITH_DES_CBC_SHA:
+        case SSL_DHE_DSS_WITH_DES_CBC_SHA:
+        case SSL_DHE_RSA_WITH_DES_CBC_SHA:
+        /* Disable IDEA: */
+        case SSL_RSA_WITH_IDEA_CBC_SHA:
+        case SSL_RSA_WITH_IDEA_CBC_MD5:
+          break;
+        default: /* enable everything else */
+          allowed_ciphers[allowed_ciphers_count++] = all_ciphers[i];
+          break;
+      }
+    }
+    err = SSLSetEnabledCiphers(connssl->ssl_ctx, allowed_ciphers,
+                               allowed_ciphers_count);
+    if(err != noErr) {
+      failf(data, "SSL: SSLSetEnabledCiphers() failed: OSStatus %d", err);
+      return CURLE_SSL_CONNECT_ERROR;
+    }
+  }
+  else {
+    Curl_safefree(all_ciphers);
+    Curl_safefree(allowed_ciphers);
+    failf(data, "SSL: Failed to allocate memory for allowed ciphers");
+    return CURLE_OUT_OF_MEMORY;
+  }
+  Curl_safefree(all_ciphers);
+  Curl_safefree(allowed_ciphers);
+
+  /* Check if there's a cached ID we can/should use here! */
+  if(!Curl_ssl_getsessionid(conn, (void **)&ssl_sessionid,
+    &ssl_sessionid_len)) {
+    /* we got a session id, use it! */
+    err = SSLSetPeerID(connssl->ssl_ctx, ssl_sessionid, ssl_sessionid_len);
+    if(err != noErr) {
+      failf(data, "SSL: SSLSetPeerID() failed: OSStatus %d", err);
+      return CURLE_SSL_CONNECT_ERROR;
+    }
+    /* Informational message */
+    infof(data, "SSL re-using session ID\n");
+  }
+  /* If there isn't one, then let's make one up! This has to be done prior
+     to starting the handshake. */
+  else {
+    CURLcode retcode;
+
+    ssl_sessionid = malloc(256*sizeof(char));
+    ssl_sessionid_len = snprintf(ssl_sessionid, 256, "curl:%s:%hu",
+      conn->host.name, conn->remote_port);
+    err = SSLSetPeerID(connssl->ssl_ctx, ssl_sessionid, ssl_sessionid_len);
+    if(err != noErr) {
+      failf(data, "SSL: SSLSetPeerID() failed: OSStatus %d", err);
+      return CURLE_SSL_CONNECT_ERROR;
+    }
+    retcode = Curl_ssl_addsessionid(conn, ssl_sessionid, ssl_sessionid_len);
+    if(retcode!= CURLE_OK) {
+      failf(data, "failed to store ssl session");
+      return retcode;
+    }
+  }
+
   err = SSLSetIOFuncs(connssl->ssl_ctx, SocketRead, SocketWrite);
   if(err != noErr) {
     failf(data, "SSL: SSLSetIOFuncs() failed: OSStatus %d", err);
@@ -872,8 +1224,6 @@ static CURLcode darwinssl_connect_step1(struct connectdata *conn,
    * SSLSetConnection() will not copy that address. I've found that
    * conn->sock[sockindex] may change on its own. */
   connssl->ssl_sockfd = sockfd;
-  /*ssl_connection = &(connssl->ssl_sockfd);
-  err = SSLSetConnection(connssl->ssl_ctx, ssl_connection);*/
   err = SSLSetConnection(connssl->ssl_ctx, connssl);
   if(err != noErr) {
     failf(data, "SSL: SSLSetConnection() failed: %d", err);
@@ -907,22 +1257,71 @@ darwinssl_connect_step2(struct connectdata *conn, int sockindex)
             ssl_connect_2_writing : ssl_connect_2_reading;
         return CURLE_OK;
 
-      case errSSLServerAuthCompleted:
+      /* The below is errSSLServerAuthCompleted; it's not defined in
+        Leopard's headers */
+      case -9841:
         /* the documentation says we need to call SSLHandshake() again */
         return darwinssl_connect_step2(conn, sockindex);
 
+      /* These are all certificate problems with the server: */
       case errSSLXCertChainInvalid:
-      case errSSLUnknownRootCert:
-      case errSSLNoRootCert:
-      case errSSLCertExpired:
-        failf(data, "SSL certificate problem: OSStatus %d", err);
+        failf(data, "SSL certificate problem: Invalid certificate chain");
         return CURLE_SSL_CACERT;
+      case errSSLUnknownRootCert:
+        failf(data, "SSL certificate problem: Untrusted root certificate");
+        return CURLE_SSL_CACERT;
+      case errSSLNoRootCert:
+        failf(data, "SSL certificate problem: No root certificate");
+        return CURLE_SSL_CACERT;
+      case errSSLCertExpired:
+        failf(data, "SSL certificate problem: Certificate chain had an "
+              "expired certificate");
+        return CURLE_SSL_CACERT;
+      case errSSLBadCert:
+        failf(data, "SSL certificate problem: Couldn't understand the server "
+              "certificate format");
+        return CURLE_SSL_CONNECT_ERROR;
 
+      /* These are all certificate problems with the client: */
+      case errSecAuthFailed:
+        failf(data, "SSL authentication failed");
+        return CURLE_SSL_CONNECT_ERROR;
+      case errSSLPeerHandshakeFail:
+        failf(data, "SSL peer handshake failed, the server most likely "
+              "requires a client certificate to connect");
+        return CURLE_SSL_CONNECT_ERROR;
+      case errSSLPeerUnknownCA:
+        failf(data, "SSL server rejected the client certificate due to "
+              "the certificate being signed by an unknown certificate "
+              "authority");
+        return CURLE_SSL_CONNECT_ERROR;
+
+      /* This error is raised if the server's cert didn't match the server's
+         host name: */
       case errSSLHostNameMismatch:
         failf(data, "SSL certificate peer verification failed, the "
               "certificate did not match \"%s\"\n", conn->host.dispname);
         return CURLE_PEER_FAILED_VERIFICATION;
 
+      /* Generic handshake errors: */
+      case errSSLConnectionRefused:
+        failf(data, "Server dropped the connection during the SSL handshake");
+        return CURLE_SSL_CONNECT_ERROR;
+      case errSSLClosedAbort:
+        failf(data, "Server aborted the SSL handshake");
+        return CURLE_SSL_CONNECT_ERROR;
+      case errSSLNegotiation:
+        failf(data, "Could not negotiate an SSL cipher suite with the server");
+        return CURLE_SSL_CONNECT_ERROR;
+      /* Sometimes paramErr happens with buggy ciphers: */
+      case paramErr: case errSSLInternal:
+        failf(data, "Internal SSL engine error encountered during the "
+              "SSL handshake");
+        return CURLE_SSL_CONNECT_ERROR;
+      case errSSLFatalAlert:
+        failf(data, "Fatal SSL engine error encountered during the SSL "
+              "handshake");
+        return CURLE_SSL_CONNECT_ERROR;
       default:
         failf(data, "Unknown SSL protocol error in connection to %s:%d",
               conn->host.name, err);
@@ -949,7 +1348,7 @@ darwinssl_connect_step2(struct connectdata *conn, int sockindex)
         infof(data, "TLS 1.0 connection using %s\n",
               TLSCipherNameForNumber(cipher));
         break;
-#if defined(__MAC_10_8) || defined(__IPHONE_5_0)
+#if CURL_BUILD_MAC_10_8 || CURL_BUILD_IOS
       case kTLSProtocol11:
         infof(data, "TLS 1.1 connection using %s\n",
               TLSCipherNameForNumber(cipher));
@@ -976,24 +1375,26 @@ darwinssl_connect_step3(struct connectdata *conn,
   struct ssl_connect_data *connssl = &conn->ssl[sockindex];
   CFStringRef server_cert_summary;
   char server_cert_summary_c[128];
-  CFArrayRef server_certs;
+  CFArrayRef server_certs = NULL;
   SecCertificateRef server_cert;
   OSStatus err;
   CFIndex i, count;
-  SecTrustRef trust;
+  SecTrustRef trust = NULL;
 
   /* There is no step 3!
    * Well, okay, if verbose mode is on, let's print the details of the
    * server certificates. */
-#if defined(__MAC_10_7) || defined(__IPHONE_5_0)
-#if (TARGET_OS_EMBEDDED || TARGET_OS_IPHONE)
+#if CURL_BUILD_MAC_10_7 || CURL_BUILD_IOS
+#if CURL_BUILD_IOS
 #pragma unused(server_certs)
   err = SSLCopyPeerTrust(connssl->ssl_ctx, &trust);
-  if(err == noErr) {
+  /* For some reason, SSLCopyPeerTrust() can return noErr and yet return
+     a null trust, so be on guard for that: */
+  if(err == noErr && trust) {
     count = SecTrustGetCertificateCount(trust);
     for(i = 0L ; i < count ; i++) {
       server_cert = SecTrustGetCertificateAtIndex(trust, i);
-      server_cert_summary = SecCertificateCopySubjectSummary(server_cert);
+      server_cert_summary = CopyCertSubject(server_cert);
       memset(server_cert_summary_c, 0, 128);
       if(CFStringGetCString(server_cert_summary,
                             server_cert_summary_c,
@@ -1015,12 +1416,13 @@ darwinssl_connect_step3(struct connectdata *conn,
   if(SecTrustEvaluateAsync != NULL) {
 #pragma unused(server_certs)
     err = SSLCopyPeerTrust(connssl->ssl_ctx, &trust);
-    if(err == noErr) {
+    /* For some reason, SSLCopyPeerTrust() can return noErr and yet return
+       a null trust, so be on guard for that: */
+    if(err == noErr && trust) {
       count = SecTrustGetCertificateCount(trust);
       for(i = 0L ; i < count ; i++) {
         server_cert = SecTrustGetCertificateAtIndex(trust, i);
-        server_cert_summary =
-          SecCertificateCopyLongDescription(NULL, server_cert, NULL);
+        server_cert_summary = CopyCertSubject(server_cert);
         memset(server_cert_summary_c, 0, 128);
         if(CFStringGetCString(server_cert_summary,
                               server_cert_summary_c,
@@ -1034,14 +1436,16 @@ darwinssl_connect_step3(struct connectdata *conn,
     }
   }
   else {
+#if CURL_SUPPORT_MAC_10_8
     err = SSLCopyPeerCertificates(connssl->ssl_ctx, &server_certs);
-    if(err == noErr) {
+    /* Just in case SSLCopyPeerCertificates() returns null too... */
+    if(err == noErr && server_certs) {
       count = CFArrayGetCount(server_certs);
       for(i = 0L ; i < count ; i++) {
         server_cert = (SecCertificateRef)CFArrayGetValueAtIndex(server_certs,
                                                                 i);
 
-        server_cert_summary = SecCertificateCopySubjectSummary(server_cert);
+        server_cert_summary = CopyCertSubject(server_cert);
         memset(server_cert_summary_c, 0, 128);
         if(CFStringGetCString(server_cert_summary,
                               server_cert_summary_c,
@@ -1053,8 +1457,9 @@ darwinssl_connect_step3(struct connectdata *conn,
       }
       CFRelease(server_certs);
     }
+#endif /* CURL_SUPPORT_MAC_10_8 */
   }
-#endif /* (TARGET_OS_EMBEDDED || TARGET_OS_IPHONE) */
+#endif /* CURL_BUILD_IOS */
 #else
 #pragma unused(trust)
   err = SSLCopyPeerCertificates(connssl->ssl_ctx, &server_certs);
@@ -1062,8 +1467,7 @@ darwinssl_connect_step3(struct connectdata *conn,
     count = CFArrayGetCount(server_certs);
     for(i = 0L ; i < count ; i++) {
       server_cert = (SecCertificateRef)CFArrayGetValueAtIndex(server_certs, i);
-
-      server_cert_summary = SecCertificateCopySubjectSummary(server_cert);
+      server_cert_summary = CopyCertSubject(server_cert);
       memset(server_cert_summary_c, 0, 128);
       if(CFStringGetCString(server_cert_summary,
                             server_cert_summary_c,
@@ -1075,7 +1479,7 @@ darwinssl_connect_step3(struct connectdata *conn,
     }
     CFRelease(server_certs);
   }
-#endif /* defined(__MAC_10_7) || defined(__IPHONE_5_0) */
+#endif /* CURL_BUILD_MAC_10_7 || CURL_BUILD_IOS */
 
   connssl->connecting_state = ssl_connect_done;
   return CURLE_OK;
@@ -1227,16 +1631,16 @@ void Curl_darwinssl_close(struct connectdata *conn, int sockindex)
 
   if(connssl->ssl_ctx) {
     (void)SSLClose(connssl->ssl_ctx);
-#if defined(__MAC_10_8) || defined(__IPHONE_5_0)
+#if CURL_BUILD_MAC_10_8 || CURL_BUILD_IOS
     if(SSLCreateContext != NULL)
       CFRelease(connssl->ssl_ctx);
-#if (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE))
+#if CURL_SUPPORT_MAC_10_8
     else
       (void)SSLDisposeContext(connssl->ssl_ctx);
-#endif  /* (TARGET_OS_MAC && !(TARGET_OS_EMBEDDED || TARGET_OS_IPHONE)) */
+#endif  /* CURL_SUPPORT_MAC_10_8 */
 #else
     (void)SSLDisposeContext(connssl->ssl_ctx);
-#endif /* defined(__MAC_10_8) || defined(__IPHONE_5_0) */
+#endif /* CURL_BUILD_MAC_10_8 || CURL_BUILD_IOS */
     connssl->ssl_ctx = NULL;
   }
   connssl->ssl_sockfd = 0;
@@ -1302,6 +1706,17 @@ int Curl_darwinssl_shutdown(struct connectdata *conn, int sockindex)
   return rc;
 }
 
+void Curl_darwinssl_session_free(void *ptr)
+{
+  /* ST, as of iOS 5 and Mountain Lion, has no public method of deleting a
+     cached session ID inside the Security framework. There is a private
+     function that does this, but I don't want to have to explain to you why I
+     got your application rejected from the App Store due to the use of a
+     private API, so the best we can do is free up our own char array that we
+     created way back in darwinssl_connect_step1... */
+  Curl_safefree(ptr);
+}
+
 size_t Curl_darwinssl_version(char *buffer, size_t size)
 {
   return snprintf(buffer, size, "SecureTransport");
@@ -1384,22 +1799,58 @@ static ssize_t darwinssl_send(struct connectdata *conn,
   /*struct SessionHandle *data = conn->data;*/
   struct ssl_connect_data *connssl = &conn->ssl[sockindex];
   size_t processed = 0UL;
-  OSStatus err = SSLWrite(connssl->ssl_ctx, mem, len, &processed);
+  OSStatus err;
 
+  /* The SSLWrite() function works a little differently than expected. The
+     fourth argument (processed) is currently documented in Apple's
+     documentation as: "On return, the length, in bytes, of the data actually
+     written."
+
+     Now, one could interpret that as "written to the socket," but actually,
+     it returns the amount of data that was written to a buffer internal to
+     the SSLContextRef instead. So it's possible for SSLWrite() to return
+     errSSLWouldBlock and a number of bytes "written" because those bytes were
+     encrypted and written to a buffer, not to the socket.
+
+     So if this happens, then we need to keep calling SSLWrite() over and
+     over again with no new data until it quits returning errSSLWouldBlock. */
+
+  /* Do we have buffered data to write from the last time we were called? */
+  if(connssl->ssl_write_buffered_length) {
+    /* Write the buffered data: */
+    err = SSLWrite(connssl->ssl_ctx, NULL, 0UL, &processed);
+    switch (err) {
+      case noErr:
+        /* processed is always going to be 0 because we didn't write to
+           the buffer, so return how much was written to the socket */
+        processed = connssl->ssl_write_buffered_length;
+        connssl->ssl_write_buffered_length = 0UL;
+        break;
+      case errSSLWouldBlock: /* argh, try again */
+        *curlcode = CURLE_AGAIN;
+        return -1L;
+      default:
+        failf(conn->data, "SSLWrite() returned error %d", err);
+        *curlcode = CURLE_SEND_ERROR;
+        return -1L;
+    }
+  }
+  else {
+    /* We've got new data to write: */
+    err = SSLWrite(connssl->ssl_ctx, mem, len, &processed);
     if(err != noErr) {
       switch (err) {
-      case errSSLWouldBlock:  /* return how much we sent (if anything) */
-        if(processed)
-          return (ssize_t)processed;
+        case errSSLWouldBlock:
+          /* Data was buffered but not sent, we have to tell the caller
+             to try sending again, and remember how much was buffered */
+          connssl->ssl_write_buffered_length = len;
           *curlcode = CURLE_AGAIN;
-        return -1;
-        break;
-
+          return -1L;
         default:
-        failf(conn->data, "SSLWrite() return error %d", err);
+          failf(conn->data, "SSLWrite() returned error %d", err);
           *curlcode = CURLE_SEND_ERROR;
-        return -1;
-        break;
+          return -1L;
+      }
     }
   }
   return (ssize_t)processed;
@@ -1422,18 +1873,23 @@ static ssize_t darwinssl_recv(struct connectdata *conn,
         if(processed)
           return (ssize_t)processed;
         *curlcode = CURLE_AGAIN;
-        return -1;
+        return -1L;
         break;
 
-      case errSSLClosedGraceful: /* they're done; fail gracefully */
+      /* errSSLClosedGraceful - server gracefully shut down the SSL session
+         errSSLClosedNoNotify - server hung up on us instead of sending a
+           closure alert notice, read() is returning 0
+         Either way, inform the caller that the server disconnected. */
+      case errSSLClosedGraceful:
+      case errSSLClosedNoNotify:
         *curlcode = CURLE_OK;
-        return -1;
+        return -1L;
         break;
 
       default:
         failf(conn->data, "SSLRead() return error %d", err);
         *curlcode = CURLE_RECV_ERROR;
-        return -1;
+        return -1L;
         break;
     }
   }

lib/curl_darwinssl.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 2012, Nick Zitzmann, <nickzman@gmail.com>.
+ * Copyright (C) 2012 - 2013, Nick Zitzmann, <nickzman@gmail.com>.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -37,6 +37,7 @@ void Curl_darwinssl_close_all(struct SessionHandle *data);
 /* close a SSL connection */
 void Curl_darwinssl_close(struct connectdata *conn, int sockindex);
 
+void Curl_darwinssl_session_free(void *ptr);
 size_t Curl_darwinssl_version(char *buffer, size_t size);
 int Curl_darwinssl_shutdown(struct connectdata *conn, int sockindex);
 int Curl_darwinssl_check_cxn(struct connectdata *conn);
@@ -51,12 +52,16 @@ void Curl_darwinssl_md5sum(unsigned char *tmp, /* input */
                            unsigned char *md5sum, /* output */
                            size_t md5len);
 
+/* this backend provides these functions: */
+#define have_curlssl_random 1
+#define have_curlssl_md5sum 1
+
 /* API setup for SecureTransport */
 #define curlssl_init() (1)
 #define curlssl_cleanup() Curl_nop_stmt
 #define curlssl_connect Curl_darwinssl_connect
 #define curlssl_connect_nonblocking Curl_darwinssl_connect_nonblocking
-#define curlssl_session_free(x) Curl_nop_stmt
+#define curlssl_session_free(x) Curl_darwinssl_session_free(x)
 #define curlssl_close_all Curl_darwinssl_close_all
 #define curlssl_close Curl_darwinssl_close
 #define curlssl_shutdown(x,y) 0

lib/curl_memory.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -22,17 +22,86 @@
  *
  ***************************************************************************/
 
-#include <curl/curl.h> /* for the typedefs */
+/*
+ * Nasty internal details ahead...
+ *
+ * File curl_memory.h must be included by _all_ *.c source files
+ * that use memory related functions strdup, malloc, calloc, realloc
+ * or free, and given source file is used to build libcurl library.
+ *
+ * There is nearly no exception to above rule. All libcurl source
+ * files in 'lib' subdirectory as well as those living deep inside
+ * 'packages' subdirectories and linked together in order to build
+ * libcurl library shall follow it.
+ *
+ * File lib/strdup.c is an exception, given that it provides a strdup
+ * clone implementation while using malloc. Extra care needed inside
+ * this one. TODO: revisit this paragraph and related code.
+ *
+ * The need for curl_memory.h inclusion is due to libcurl's feature
+ * of allowing library user to provide memory replacement functions,
+ * memory callbacks, at runtime with curl_global_init_mem()
+ *
+ * Any *.c source file used to build libcurl library that does not
+ * include curl_memory.h and uses any memory function of the five
+ * mentioned above will compile without any indication, but it will
+ * trigger weird memory related issues at runtime.
+ *
+ * OTOH some source files from 'lib' subdirectory may additionally be
+ * used directly as source code when using some curlx_ functions by
+ * third party programs that don't even use libcurl at all. When using
+ * these source files in this way it is necessary these are compiled
+ * with CURLX_NO_MEMORY_CALLBACKS defined, in order to ensure that no
+ * attempt of calling libcurl's memory callbacks is done from code
+ * which can not use this machinery.
+ *
+ * Notice that libcurl's 'memory tracking' system works chaining into
+ * the memory callback machinery. This implies that when compiling
+ * 'lib' source files with CURLX_NO_MEMORY_CALLBACKS defined this file
+ * disengages usage of libcurl's 'memory tracking' system, defining
+ * MEMDEBUG_NODEFINES and overriding CURLDEBUG purpose.
+ *
+ * CURLX_NO_MEMORY_CALLBACKS takes precedence over CURLDEBUG. This is
+ * done in order to allow building a 'memory tracking' enabled libcurl
+ * and at the same time allow building programs which do not use it.
+ *
+ * Programs and libraries in 'tests' subdirectories have specific
+ * purposes and needs, and as such each one will use whatever fits
+ * best, depending additionally wether it links with libcurl or not.
+ *
+ * Caveat emptor. Proper curlx_* separation is a work in progress
+ * the same as CURLX_NO_MEMORY_CALLBACKS usage, some adjustments may
+ * still be required. IOW don't use them yet, there are sharp edges.
+ */
+
+#ifdef HEADER_CURL_MEMDEBUG_H
+#error "Header memdebug.h shall not be included before curl_memory.h"
+#endif
+
+#ifndef CURLX_NO_MEMORY_CALLBACKS
+
+#include <curl/curl.h> /* for the callback typedefs */
 
 extern curl_malloc_callback Curl_cmalloc;
 extern curl_free_callback Curl_cfree;
 extern curl_realloc_callback Curl_crealloc;
 extern curl_strdup_callback Curl_cstrdup;
 extern curl_calloc_callback Curl_ccalloc;
+#if defined(WIN32) && defined(UNICODE)
+extern curl_wcsdup_callback Curl_cwcsdup;
+#endif
 
 #ifndef CURLDEBUG
-/* Only do this define-mania if we're not using the memdebug system, as that
-   has preference on this magic. */
+
+/*
+ * libcurl's 'memory tracking' system defines strdup, malloc, calloc,
+ * realloc and free, along with others, in memdebug.h in a different
+ * way although still using memory callbacks forward declared above.
+ * When using the 'memory tracking' system (CURLDEBUG defined) we do
+ * not define here the five memory functions given that definitions
+ * from memdebug.h are the ones that shall be used.
+ */
+
 #undef strdup
 #define strdup(ptr) Curl_cstrdup(ptr)
 #undef malloc
@@ -44,6 +113,28 @@ extern curl_calloc_callback Curl_ccalloc;
 #undef free
 #define free(ptr) Curl_cfree(ptr)
 
+#ifdef WIN32
+#  ifdef UNICODE
+#    undef wcsdup
+#    define wcsdup(ptr) Curl_cwcsdup(ptr)
+#    undef _wcsdup
+#    define _wcsdup(ptr) Curl_cwcsdup(ptr)
+#    undef _tcsdup
+#    define _tcsdup(ptr) Curl_cwcsdup(ptr)
+#  else
+#    undef _tcsdup
+#    define _tcsdup(ptr) Curl_cstrdup(ptr)
+#  endif
 #endif
 
+#endif /* CURLDEBUG */
+
+#else /* CURLX_NO_MEMORY_CALLBACKS */
+
+#ifndef MEMDEBUG_NODEFINES
+#define MEMDEBUG_NODEFINES
+#endif
+
+#endif /* CURLX_NO_MEMORY_CALLBACKS */
+
 #endif /* HEADER_CURL_MEMORY_H */

lib/curl_ntlm.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -181,7 +181,6 @@ CURLcode Curl_output_ntlm(struct connectdata *conn,
     /* Create a type-1 message */
     error = Curl_ntlm_create_type1_message(userp, passwdp, ntlm, &base64,
                                            &len);
-
     if(error)
       return error;
 
@@ -190,8 +189,10 @@ CURLcode Curl_output_ntlm(struct connectdata *conn,
       *allocuserpwd = aprintf("%sAuthorization: NTLM %s\r\n",
                               proxy ? "Proxy-" : "",
                               base64);
-      DEBUG_OUT(fprintf(stderr, "**** Header %s\n ", *allocuserpwd));
       free(base64);
+      if(!*allocuserpwd)
+        return CURLE_OUT_OF_MEMORY;
+      DEBUG_OUT(fprintf(stderr, "**** Header %s\n ", *allocuserpwd));
     }
     break;
 
@@ -207,8 +208,10 @@ CURLcode Curl_output_ntlm(struct connectdata *conn,
       *allocuserpwd = aprintf("%sAuthorization: NTLM %s\r\n",
                               proxy ? "Proxy-" : "",
                               base64);
-      DEBUG_OUT(fprintf(stderr, "**** %s\n ", *allocuserpwd));
       free(base64);
+      if(!*allocuserpwd)
+        return CURLE_OUT_OF_MEMORY;
+      DEBUG_OUT(fprintf(stderr, "**** %s\n ", *allocuserpwd));
 
       ntlm->state = NTLMSTATE_TYPE3; /* we send a type-3 */
       authp->done = TRUE;
@@ -218,10 +221,7 @@ CURLcode Curl_output_ntlm(struct connectdata *conn,
   case NTLMSTATE_TYPE3:
     /* connection is already authenticated,
      * don't send a header in future requests */
-    if(*allocuserpwd) {
-      free(*allocuserpwd);
-      *allocuserpwd = NULL;
-    }
+    Curl_safefree(*allocuserpwd);
     authp->done = TRUE;
     break;
   }

lib/curl_ntlm_core.c

@@ -421,7 +421,7 @@ CURLcode Curl_ntlm_core_mk_nt_hash(struct SessionHandle *data,
 #elif defined(USE_NSS)
     Curl_md4it(ntbuffer, pw, 2 * len);
 #elif defined(USE_DARWINSSL)
-    (void)CC_MD4(pw, 2 * len, ntbuffer);
+    (void)CC_MD4(pw, (CC_LONG)(2 * len), ntbuffer);
 #endif
 
     memset(ntbuffer + 16, 0, 21 - 16);

lib/curl_ntlm_msgs.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -179,10 +179,11 @@ static unsigned int readint_le(unsigned char *buf)
 /*
  * Curl_ntlm_decode_type2_message()
  *
- * This is used to decode a ntlm type-2 message received from a: HTTP, SMTP
- * or POP3 server. The message is first decoded from a base64 string into a
- * raw ntlm message and checked for validity before the appropriate data for
- * creating a type-3 message is written to the given ntlm data structure.
+ * This is used to decode a ntlm type-2 message received from a HTTP or SASL
+ * based (such as SMTP, POP3 or IMAP) server. The message is first decoded
+ * from a base64 string into a raw ntlm message and checked for validity
+ * before the appropriate data for creating a type-3 message is written to
+ * the given ntlm data structure.
  *
  * Parameters:
  *
@@ -305,9 +306,9 @@ static void unicodecpy(unsigned char *dest,
 /*
  * Curl_ntlm_create_type1_message()
  *
- * This is used to generate an already encoded NTLM type-1 message ready
- * for sending to the recipient, be it a: HTTP, SMTP or POP3 server,
- * using the appropriate compile time crypo API.
+ * This is used to generate an already encoded NTLM type-1 message ready for
+ * sending to the recipient, be it a HTTP or SASL based (such as SMTP, POP3
+ * or IMAP) server, using the appropriate compile time crypo API.
  *
  * Parameters:
  *
@@ -552,9 +553,9 @@ CURLcode Curl_ntlm_create_type1_message(const char *userp,
 /*
  * Curl_ntlm_create_type3_message()
  *
- * This is used to generate an already encoded NTLM type-3 message ready
- * for sending to the recipient, be it a: HTTP, SMTP or POP3 server,
- * using the appropriate compile time crypo API.
+ * This is used to generate an already encoded NTLM type-3 message ready for
+ * sending to the recipient, be it a HTTP or SASL based (such as SMTP, POP3
+ * or IMAP) server, using the appropriate compile time crypo API.
  *
  * Parameters:
  *

lib/curl_sasl.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 2012-2013, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 2012 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -32,7 +32,7 @@
 
 #include "curl_base64.h"
 #include "curl_md5.h"
-#include "curl_rand.h"
+#include "sslgen.h"
 #include "curl_hmac.h"
 #include "curl_ntlm_msgs.h"
 #include "curl_sasl.h"
@@ -90,8 +90,8 @@ static bool sasl_digest_get_key_value(const unsigned char *chlg,
  * Returns CURLE_OK on success.
  */
 CURLcode Curl_sasl_create_plain_message(struct SessionHandle *data,
-                                        const char* userp,
-                                        const char* passwdp,
+                                        const char *userp,
+                                        const char *passwdp,
                                         char **outptr, size_t *outlen)
 {
   char plainauth[2 * MAX_CURL_USER_LENGTH + MAX_CURL_PASSWORD_LENGTH];
@@ -138,7 +138,7 @@ CURLcode Curl_sasl_create_plain_message(struct SessionHandle *data,
  * Returns CURLE_OK on success.
  */
 CURLcode Curl_sasl_create_login_message(struct SessionHandle *data,
-                                        const char* valuep, char **outptr,
+                                        const char *valuep, char **outptr,
                                         size_t *outlen)
 {
   size_t vlen = strlen(valuep);
@@ -179,9 +179,9 @@ CURLcode Curl_sasl_create_login_message(struct SessionHandle *data,
  * Returns CURLE_OK on success.
  */
 CURLcode Curl_sasl_create_cram_md5_message(struct SessionHandle *data,
-                                           const char* chlg64,
-                                           const char* userp,
-                                           const char* passwdp,
+                                           const char *chlg64,
+                                           const char *userp,
+                                           const char *passwdp,
                                            char **outptr, size_t *outlen)
 {
   CURLcode result = CURLE_OK;
@@ -250,10 +250,10 @@ CURLcode Curl_sasl_create_cram_md5_message(struct SessionHandle *data,
  * Returns CURLE_OK on success.
  */
 CURLcode Curl_sasl_create_digest_md5_message(struct SessionHandle *data,
-                                             const char* chlg64,
-                                             const char* userp,
-                                             const char* passwdp,
-                                             const char* service,
+                                             const char *chlg64,
+                                             const char *userp,
+                                             const char *passwdp,
+                                             const char *service,
                                              char **outptr, size_t *outlen)
 {
   static const char table16[] = "0123456789abcdef";
@@ -283,6 +283,9 @@ CURLcode Curl_sasl_create_digest_md5_message(struct SessionHandle *data,
   if(result)
     return result;
 
+  if(!chlg)
+    return CURLE_LOGIN_DENIED;
+
   /* Retrieve nonce string from the challenge */
   if(!sasl_digest_get_key_value(chlg, "nonce=\"", nonce,
                                 sizeof(nonce), '\"')) {
@@ -311,7 +314,7 @@ CURLcode Curl_sasl_create_digest_md5_message(struct SessionHandle *data,
 
   /* Generate 64 bits of random data */
   for(i = 0; i < 8; i++)
-    cnonce[i] = table16[Curl_rand()%16];
+    cnonce[i] = table16[Curl_rand(data)%16];
 
   /* So far so good, now calculate A1 and H(A1) according to RFC 2831 */
   ctxt = Curl_MD5_init(Curl_DIGEST_MD5);

lib/curl_sasl.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 2012 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -25,40 +25,44 @@
 #include "pingpong.h"
 
 /* Authentication mechanism flags */
-#define SASL_MECH_LOGIN         0x0001
-#define SASL_MECH_PLAIN         0x0002
-#define SASL_MECH_CRAM_MD5      0x0004
-#define SASL_MECH_DIGEST_MD5    0x0008
-#define SASL_MECH_GSSAPI        0x0010
-#define SASL_MECH_EXTERNAL      0x0020
-#define SASL_MECH_NTLM          0x0040
+#define SASL_MECH_LOGIN         (1 << 0)
+#define SASL_MECH_PLAIN         (1 << 1)
+#define SASL_MECH_CRAM_MD5      (1 << 2)
+#define SASL_MECH_DIGEST_MD5    (1 << 3)
+#define SASL_MECH_GSSAPI        (1 << 4)
+#define SASL_MECH_EXTERNAL      (1 << 5)
+#define SASL_MECH_NTLM          (1 << 6)
+
+/* Authentication mechanism values */
+#define SASL_AUTH_NONE          0
+#define SASL_AUTH_ANY           ~0
 
 /* This is used to generate a base64 encoded PLAIN authentication message */
 CURLcode Curl_sasl_create_plain_message(struct SessionHandle *data,
-                                        const char* userp,
-                                        const char* passwdp,
+                                        const char *userp,
+                                        const char *passwdp,
                                         char **outptr, size_t *outlen);
 
 /* This is used to generate a base64 encoded LOGIN authentication message
    containing either the user name or password details */
 CURLcode Curl_sasl_create_login_message(struct SessionHandle *data,
-                                        const char* valuep, char **outptr,
+                                        const char *valuep, char **outptr,
                                         size_t *outlen);
 
 #ifndef CURL_DISABLE_CRYPTO_AUTH
 /* This is used to generate a base64 encoded CRAM-MD5 response message */
 CURLcode Curl_sasl_create_cram_md5_message(struct SessionHandle *data,
-                                           const char* chlg64,
-                                           const char* user,
-                                           const char* passwdp,
+                                           const char *chlg64,
+                                           const char *user,
+                                           const char *passwdp,
                                            char **outptr, size_t *outlen);
 
 /* This is used to generate a base64 encoded DIGEST-MD5 response message */
 CURLcode Curl_sasl_create_digest_md5_message(struct SessionHandle *data,
-                                             const char* chlg64,
-                                             const char* user,
-                                             const char* passwdp,
-                                             const char* service,
+                                             const char *chlg64,
+                                             const char *user,
+                                             const char *passwdp,
+                                             const char *service,
                                              char **outptr, size_t *outlen);
 #endif