RELEASE-NOTES: synced with ef60fdbd73

Just before 7.26.0 is about to ship

Android.mk

@@ -2,7 +2,7 @@
 #
 # Place the curl source (including this makefile) into external/curl/ in the
 # Android source tree.  Then build them with 'make curl' or just 'make libcurl'
-# from the Android root. Tested with Android 1.5 and 2.1
+# from the Android root. Tested with Android versions 1.5, 2.1-2.3
 #
 # Note: you must first create a curl_config.h file by running configure in the
 # Android environment. The only way I've found to do this is tricky. Perform a
@@ -42,7 +42,7 @@
 # into the right place (but see the note about this below).
 #
 # Dan Fandrich
-# August 2010
+# November 2011
 
 LOCAL_PATH:= $(call my-dir)
 

CHANGES.0

@@ -146,7 +146,7 @@ Daniel Stenberg (14 May 2010)
   compressed Content-Encoding!
 
   (http://curl.haxx.se/bug/view.cgi?id=3000056)
-  
+
 Daniel Stenberg (12 May 2010)
 - Howard Chu brought support for RTMP. This is powered by the underlying
   librtmp library. It supports a range of variations and "sub-protocols"
@@ -181,14 +181,14 @@ Daniel Stenberg (7 May 2010)
   That situation is subject for some closer inspection in the future.
 
 - Howard Chu split the I/O handling functions into private handlers.
-    
+
   Howard Chu brought the bulk work of this patch that properly moves out the
   sending and recving of data to the parts of the code that are properly
   responsible for the various ways of doing so.
-  
+
   Daniel Stenberg assisted with polishing a few bits and fixed some minor
   flaws in the original patch.
-  
+
   Another upside of this patch is that we now abuse CURLcodes less with the
   "magic" -1 return codes and instead use CURLE_AGAIN more consistently.
 
@@ -296,7 +296,7 @@ Daniel Stenberg (28 Mar 2010)
 - Ben Greear: If you pass a URL to pop3 that does not contain a message ID as
   part of the URL, it would previously ask for 'INBOX' which just causes the
   pop3 server to return an error.
-    
+
   Now libcurl treats en empty message ID as a request for LIST (list of pop3
   message IDs).  User's code could then parse this and download individual
   messages as desired.
@@ -318,7 +318,7 @@ Daniel Stenberg (24 Mar 2010)
   the last packet received constitutes the end of the response body, libcurl
   still treats it as a timeout condition and reports a message like:
 
-  "Operation timed out after 3000 milliseconds with 876 out of 876 bytes 
+  "Operation timed out after 3000 milliseconds with 876 out of 876 bytes
   received"
 
   It should only a timeout if the timer lapsed and we DIDN'T receive the end
@@ -368,7 +368,7 @@ Daniel Stenberg (22 Mar 2010)
   case of a timeout, the signal handler for SIGALRM never gets removed. I
   think that in my case it gets executed at some point later on when execution
   has long left Curl_resolv_timeout() or even the cURL library.
-  
+
   The code that is jumped to with siglongjmp() simply sets the error message
   to "name lookup timed out" and then returns with CURLRESOLV_ERROR. I guess
   that instead of simply returning without cleaning up, the code should have a
@@ -17288,7 +17288,7 @@ Version 5.1 (not publicly released)
 
    They should be set for protocol-specific proxies. General proxy should be
    set with
-	
+
 	ALL_PROXY
 
    And a comma-separated list of host names that shouldn't go through any

CMake/FindCARES.cmake

@@ -11,7 +11,7 @@ FIND_PATH(CARES_INCLUDE_DIR ares.h
   /usr/local/include
   /usr/include
   )
- 
+
 SET(CARES_NAMES ${CARES_NAMES} cares)
 FIND_LIBRARY(CARES_LIBRARY
   NAMES ${CARES_NAMES}

CMakeLists.txt

@@ -57,10 +57,6 @@ set(OS "\"${CMAKE_SYSTEM_NAME}\"")
 include_directories(${PROJECT_BINARY_DIR}/include/curl)
 include_directories( ${CURL_SOURCE_DIR}/include )
 
-if(WIN32)
-  set(NATIVE_WINDOWS ON)
-endif()
-
 option(BUILD_CURL_EXE "Set to ON to build cURL executable." ON)
 option(BUILD_CURL_TESTS "Set to ON to build cURL tests." ON)
 option(CURL_STATICLIB "Set to ON to build libcurl with static linking." OFF)
@@ -113,22 +109,11 @@ mark_as_advanced(CURL_DISABLE_HTTP)
 
 option(CURL_DISABLE_LDAPS "to disable LDAPS" OFF)
 mark_as_advanced(CURL_DISABLE_LDAPS)
-if(WIN32)
-  set(CURL_DEFAULT_DISABLE_LDAP OFF)
-  # some windows compilers do not have wldap32
-  if( NOT HAVE_WLDAP32)
-    set(CURL_DISABLE_LDAP ON CACHE BOOL "" FORCE)
-    message(STATUS "wldap32 not found CURL_DISABLE_LDAP set ON")
-    option(CURL_LDAP_WIN "Use Windows LDAP implementation" OFF)
-  else()
-    option(CURL_LDAP_WIN "Use Windows LDAP implementation" ON)
-  endif()
-  mark_as_advanced(CURL_LDAP_WIN)
-endif()
 
 if(HTTP_ONLY)
   set(CURL_DISABLE_FTP ON)
   set(CURL_DISABLE_LDAP ON)
+  set(CURL_DISABLE_LDAPS ON)
   set(CURL_DISABLE_TELNET ON)
   set(CURL_DISABLE_DICT ON)
   set(CURL_DISABLE_FILE ON)
@@ -148,9 +133,9 @@ option(ENABLE_IPV6 "Define if you want to enable IPv6 support" OFF)
 mark_as_advanced(ENABLE_IPV6)
 
 if(WIN32)
-  find_library(WSOCK32_LIBRARY wsock32)
-  find_library(WS2_32_LIBRARY ws2_32)
-  list_spaces_append_once(CMAKE_C_STANDARD_LIBRARIES ${WSOCK32_LIBRARY} ${WS2_32_LIBRARY})  # bufferoverflowu.lib
+  # Windows standard libraries are located in C:/Program Files/Microsoft SDKs/[...]
+  # They are already included in the default MSVC LIBPATH => no find_library is needed!
+  list_spaces_append_once(CMAKE_C_STANDARD_LIBRARIES wsock32.lib ws2_32.lib)  # bufferoverflowu.lib
   if(CURL_DISABLE_LDAP)
     # Remove wldap32.lib from space-separated list
     string(REPLACE " " ";" _LIST ${CMAKE_C_STANDARD_LIBRARIES})
@@ -221,6 +206,20 @@ check_library_exists_concat("ws2_32" getch        HAVE_LIBWS2_32)
 check_library_exists_concat("winmm"  getch        HAVE_LIBWINMM)
 check_library_exists("wldap32" cldap_open "" HAVE_WLDAP32)
 
+if(WIN32)
+  set(CURL_DEFAULT_DISABLE_LDAP OFF)
+  # some windows compilers do not have wldap32
+  if(NOT HAVE_WLDAP32)
+    set(CURL_DISABLE_LDAP ON CACHE BOOL "" FORCE)
+    message(STATUS "wldap32 not found CURL_DISABLE_LDAP set ON")
+    option(CURL_LDAP_WIN "Use Windows LDAP implementation" OFF)
+  else()
+    option(CURL_LDAP_WIN "Use Windows LDAP implementation" ON)
+  endif()
+  mark_as_advanced(CURL_LDAP_WIN)
+endif()
+
+
 # IF(NOT CURL_SPECIAL_LIBZ)
 #  CHECK_LIBRARY_EXISTS_CONCAT("z"      inflateEnd   HAVE_LIBZ)
 # ENDIF(NOT CURL_SPECIAL_LIBZ)
@@ -382,11 +381,18 @@ if(CMAKE_USE_OPENSSL)
   check_include_file_concat("openssl/rand.h"   HAVE_OPENSSL_RAND_H)
 endif(CMAKE_USE_OPENSSL)
 
-if(NOT HAVE_LDAP_H) 
+if(NOT HAVE_LDAP_H)
   message(STATUS "LDAP_H not found CURL_DISABLE_LDAP set ON")
   set(CURL_DISABLE_LDAP ON CACHE BOOL "" FORCE)
 endif()
 
+# No ldap, no ldaps.
+if(CURL_DISABLE_LDAP)
+  if(NOT CURL_DISABLE_LDAPS)
+    message(STATUS "LDAP needs to be enabled to support LDAPS")
+    set(CURL_DISABLE_LDAPS ON CACHE BOOL "" FORCE)
+  endif()
+endif()
 
 check_type_size(size_t  SIZEOF_SIZE_T)
 check_type_size(ssize_t  SIZEOF_SSIZE_T)
@@ -426,7 +432,7 @@ if(SIZEOF_LONG EQUAL 8)
   set(CURL_FORMAT_CURL_OFF_TU "lu")
   set(CURL_FORMAT_OFF_T "%ld")
   set(CURL_SUFFIX_CURL_OFF_T L)
-  set(CURL_SUFFIX_CURL_OFF_TU LU)
+  set(CURL_SUFFIX_CURL_OFF_TU UL)
 endif(SIZEOF_LONG EQUAL 8)
 
 if(SIZEOF_LONG_LONG EQUAL 8)
@@ -436,7 +442,7 @@ if(SIZEOF_LONG_LONG EQUAL 8)
   set(CURL_FORMAT_CURL_OFF_TU "llu")
   set(CURL_FORMAT_OFF_T "%lld")
   set(CURL_SUFFIX_CURL_OFF_T LL)
-  set(CURL_SUFFIX_CURL_OFF_TU LLU)
+  set(CURL_SUFFIX_CURL_OFF_TU ULL)
 endif(SIZEOF_LONG_LONG EQUAL 8)
 
 if(NOT CURL_TYPEOF_CURL_OFF_T)
@@ -784,7 +790,7 @@ if(HAVE_SOCKLEN_T)
   check_type_size("socklen_t" CURL_SIZEOF_CURL_SOCKLEN_T)
   set(CMAKE_EXTRA_INCLUDE_FILES)
   if(NOT HAVE_CURL_SIZEOF_CURL_SOCKLEN_T)
-    message(FATAL_ERROR 
+    message(FATAL_ERROR
      "Check for sizeof socklen_t failed, see CMakeFiles/CMakerror.log")
   endif()
 else()

COPYING

@@ -1,6 +1,6 @@
 COPYRIGHT AND PERMISSION NOTICE
 
-Copyright (c) 1996 - 2011, Daniel Stenberg, <daniel@haxx.se>.
+Copyright (c) 1996 - 2012, Daniel Stenberg, <daniel@haxx.se>.
 
 All rights reserved.
 

Makefile.am

@@ -36,7 +36,7 @@ winbuild/MakefileBuild.vc winbuild/Makefile.vc
 EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in	\
  curl-style.el sample.emacs RELEASE-NOTES buildconf 	\
  libcurl.pc.in vc6curl.dsw MacOSX-Framework Android.mk $(CMAKE_DIST)	\
- Makefile.msvc.names $(WINBUILD_DIST)
+ Makefile.msvc.names $(WINBUILD_DIST) lib/libcurl.vers.in
 
 bin_SCRIPTS = curl-config
 

Makefile.dist

@@ -73,10 +73,15 @@ mingw32:
 mingw32-clean:
 	$(MAKE) -C lib -f Makefile.m32 clean
 	$(MAKE) -C src -f Makefile.m32 clean
+	$(MAKE) -C docs/examples -f Makefile.m32 clean
 
 mingw32-vclean mingw32-distclean:
 	$(MAKE) -C lib -f Makefile.m32 vclean
 	$(MAKE) -C src -f Makefile.m32 vclean
+	$(MAKE) -C docs/examples -f Makefile.m32 vclean
+
+mingw32-examples%:
+	$(MAKE) -C docs/examples -f Makefile.m32 CFG=$@
 
 mingw32%:
 	$(MAKE) -C lib -f Makefile.m32 CFG=$@
@@ -217,34 +222,27 @@ netware:
 	$(MAKE) -C lib -f Makefile.netware
 	$(MAKE) -C src -f Makefile.netware
 
-netware-ares:
-	$(MAKE) -C lib -f Makefile.netware WITH_ARES=1
-	$(MAKE) -C src -f Makefile.netware WITH_ARES=1
-
-netware-ssl:
-	$(MAKE) -C lib -f Makefile.netware WITH_SSL=1
-	$(MAKE) -C src -f Makefile.netware WITH_SSL=1
-
-netware-ssl-zlib:
-	$(MAKE) -C lib -f Makefile.netware WITH_SSL=1 WITH_ZLIB=1
-	$(MAKE) -C src -f Makefile.netware WITH_SSL=1 WITH_ZLIB=1
-
-netware-ssh2-ssl-zlib:
-	$(MAKE) -C lib -f Makefile.netware WITH_SSH2=1 WITH_SSL=1 WITH_ZLIB=1
-	$(MAKE) -C src -f Makefile.netware WITH_SSH2=1 WITH_SSL=1 WITH_ZLIB=1
-
-netware-zlib:
-	$(MAKE) -C lib -f Makefile.netware WITH_ZLIB=1
-	$(MAKE) -C src -f Makefile.netware WITH_ZLIB=1
-
 netware-clean:
 	$(MAKE) -C lib -f Makefile.netware clean
 	$(MAKE) -C src -f Makefile.netware clean
+	$(MAKE) -C docs/examples -f Makefile.netware clean
+
+netware-vclean netware-distclean:
+	$(MAKE) -C lib -f Makefile.netware vclean
+	$(MAKE) -C src -f Makefile.netware vclean
+	$(MAKE) -C docs/examples -f Makefile.netware vclean
 
 netware-install:
 	$(MAKE) -C lib -f Makefile.netware install
 	$(MAKE) -C src -f Makefile.netware install
 
+netware-examples-%:
+	$(MAKE) -C docs/examples -f Makefile.netware CFG=$@
+
+netware-%:
+	$(MAKE) -C lib -f Makefile.netware CFG=$@
+	$(MAKE) -C src -f Makefile.netware CFG=$@
+
 unix: all
 
 unix-ssl: ssl

RELEASE-NOTES

@@ -1,59 +1,54 @@
-Curl and libcurl 7.22.0
+Curl and libcurl 7.26.0
 
- Public curl releases:         124
- Command line options:         149
- curl_easy_setopt() options:   192
+ Public curl releases:         127
+ Command line options:         151
+ curl_easy_setopt() options:   199
  Public functions in libcurl:  58
  Known libcurl bindings:       39
- Contributors:                 873
+ Contributors:                 929
 
 This release includes the following changes:
 
- o Added CURLOPT_GSSAPI_DELEGATION
- o Added support for NTLM delegation to Samba's winbind daemon helper ntlm_auth
- o Display notes from setup file in testcurl.pl
- o BSD-style lwIP TCP/IP stack experimental support on Windows
- o OpenSSL: Use SSL_MODE_RELEASE_BUFFERS if available
- o --delegation was added to set CURLOPT_GSSAPI_DELEGATION
- o nss: start with no database if the selected database is broken
- o telnet: allow programatic use on Windows
+ o nss: the minimal supported version of NSS bumped to 3.12.x
+ o nss: human-readable names are now provided for NSS errors if available
+ o add a manual page for mk-ca-bundle
+ o added --post303 and the CURL_REDIR_POST_303 option for CURLOPT_POSTREDIR
+ o smtp: Add support for DIGEST-MD5 authentication
+ o pop3: Added support for additional pop3 commands
 
 This release includes the following bugfixes:
 
- o curl_getdate: detect some illegal dates better
- o when sending a request and an error is received before the (entire) request
-   body is sent, stop sending the request and close the connection after
-   having received the entire response. This is equally true if an Expect:
-   100-continue header was used.
- o When using both -J and a single -O with multiple URLs, a missing init
-   could cause a segfault
- o -J fixed for escaped quotes
- o -J fixed for file names with semicolons
- o progress: reset flags at transfer start to avoid wrong 
-   CURLINFO_CONTENT_LENGTH_DOWNLOAD
- o curl_gssapi: Guard files with HAVE_GSSAPI and rename private header
- o silence picky compilers: mark unused parameters
- o help output: more gnu like output
- o libtests: stop checking for CURLM_CALL_MULTI_PERFORM
- o setting a non-HTTP proxy with an environment variable or with CURLOPT_PROXY
-   / --proxy (without specifying CURLOPT_PROXYTYPE) would still make it do
-   proxy-like HTTP requests
- o CURLFORM_BUFFER: insert filename as documented (regression)
- o SOCKS: fix the connect timeout
- o ftp_doing: bail out on error properly while multi interfacing
- o improved Content-Encoded decoding error message
- o asyn-thread: check for dotted addresses before thread starts
- o cmake: find winsock when building on windows
- o Curl_retry_request: check return code
- o cookies: handle 'secure=' as if it was 'secure'
- o tests: break busy loops in tests 502, 555, and 573
- o FTP: fix proxy connect race condition with multi interface and SOCKS proxy
- o RTSP: GET_PARAMETER requests have a body
- o fixed several memory leaks in OOM situations
- o bad expire(0) caused multi_socket API to hang
- o Avoid ftruncate() static define with mingw64
- o mk-ca-bundle.pl: ignore untrusted certs
- o builds with PolarSSL 1.0.0
+ o nss: libcurl now uses NSS_InitContext() to prevent collisions if available
+   [1]
+ o URL parse: reject numerical IPv6 addresses outside brackets [4]
+ o MD5: fix OOM memory leak [5]
+ o OpenSSL cert: provide more details when cert check fails
+ o HTTP: empty chunked POST ended up in two zero size chunks [6]
+ o fixed a regression when curl resolved to multiple addresses and the first
+   isn't supported [7]
+ o -# progress meter: avoid superfluous updates and duplicate lines [8]
+ o headers: surround GCC attribute names with double underscores [9]
+ o PolarSSL: correct return code for CRL matches
+ o PolarSSL: include version number in version string
+ o PolarSSL: add support for asynchronous connect
+ o mk-ca-bundle: revert the LWP usage [12]
+ o IPv6 cookie domain: get rid of the first bracket before the second
+ o connect.c: return changed to CURLE_COULDNT_CONNECT when opensocket fails
+ o OpenSSL: Made cert hostname check conform to RFC 6125 [10]
+ o HTTP: reset expected DL/UL sizes on redirects [11]
+ o CMake: fix Windows LDAP/LDAPS option handling [2]
+ o CMake: fix MS Visual Studio x64 unsigned long long literal suffix [3]
+ o configure: update detection logic of getaddrinfo() thread-safeness
+ o configure: check for gethostbyname in the watt lib
+ o curl-config.1: fix curl-config usage in example [13]
+ o smtp: Fixed non-escaping of dot character at beginning of line
+ o MakefileBuild.vc: use the correct IDN variable
+ o autoconf: improve handling of versioned symbols
+ o curl.1: clarify -x usage
+ o curl: shorten user-agent
+ o smtp: issue with the multi-interface always sending postdata [14]
+ o compile error with GnuTLS+Nettle fixed
+ o winbuild: fix IPv6 enabled build
 
 This release includes the following known bugs:
 
@@ -62,11 +57,29 @@ This release includes the following known bugs:
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Paolo Piacentini, Steven Parkes, Adam Tkac, Ben Winslow, Dan Fandrich,
- Julien Chaffraix, Kamil Dudka, Mandy Wu, Michael Mueller, Patrick Monnerat,
- Yang Tse, Paul Howarth, Garrett Holmstrom, Peter Hjalmarsson, Herve Amblard,
- Christian Hagele, Richard Silverman, Henry Ludemann, Cristian Rodriguez,
- Steve Holme, Jim Hollinger, Pau Garcia i Quiles, Fabian Keil, Wu Yongzheng,
- Adriano Meirelles, Jeff Pohlmeyer
+ Andrei Cipu, Armel Asselin, Benjamin Johnson, Dag Ekengren, Dave Reisner,
+ Gokhan Sengun, Guenter Knauf, Jan Schaumann, Jonathan Nieder, Kamil Dudka,
+ Lijo Antony, Olaf Flebbe, Rodrigo Silva, Steve Holme, Tatsuhiro Tsujikawa,
+ Tim Heckman, Yang Tse, Arnaud Compan, Blaise Potard, Daniel Theron,
+ Michael Mueller, Michael Wallner, Tim Heckman, Roman Mamedov, Julian Taylor,
+ Claes Jakobsson, Pierre Chapuis, Jan Ehrhardt
 
         Thanks! (and sorry if I forgot to mention someone)
+
+References to bug reports and discussions on issues:
+
+ [1] = https://bugzilla.redhat.com/738456
+ [2] = http://curl.haxx.se/mail/lib-2012-03/0278.html
+ [3] = http://curl.haxx.se/mail/lib-2012-03/0255.html
+ [4] = http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=670126
+ [5] = http://curl.haxx.se/mail/lib-2012-04/0246.html
+ [6] = http://curl.haxx.se/mail/archive-2012-04/0060.html
+ [7] = http://curl.haxx.se/bug/view.cgi?id=3516508
+ [8] = http://curl.haxx.se/bug/view.cgi?id=3517418
+ [9] = http://curl.haxx.se/mail/lib-2012-04/0127.html
+ [10] = http://tools.ietf.org/html/rfc6125#section-6.4.3
+ [11] = http://curl.haxx.se/bug/view.cgi?id=3510057
+ [12] = http://curl.haxx.se/mail/lib-2012-03/0238.html
+ [13] = http://curl.haxx.se/bug/view.cgi?id=3528241
+ [14] = http://curl.haxx.se/mail/lib-2012-05/0108.html
+ 

TODO-RELEASE

@@ -1,11 +1,10 @@
-To be addressed in 7.22.1
-=========================
+To be addressed in 7.27
+=======================
 
-295 - "RTSP Authentication (#22)" https://github.com/bagder/curl/pull/22
+309 - metalink support for the curl tool
 
-296 - "OOM leak in multi code" (by Dan Fandrich)
+310 - a new authentication callback
 
-300 - "Polling on stray socket on sequential transfers." Andrew S
-      http://curl.haxx.se/mail/lib-2011-07/0053.html
+311 - support for SSPI schannel for SSL on windows
 
-308 -
+312 - 

acinclude.m4

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -51,7 +51,7 @@ CURL_DEF_TOKEN $1
   ],[
     tmp_exp=`eval "$ac_cpp conftest.$ac_ext" 2>/dev/null | \
       "$GREP" CURL_DEF_TOKEN 2>/dev/null | \
-      "$SED" 's/.*CURL_DEF_TOKEN[[ ]]//' 2>/dev/null | \
+      "$SED" 's/.*CURL_DEF_TOKEN[[ ]][[ ]]*//' 2>/dev/null | \
       "$SED" 's/[["]][[ ]]*[["]]//g' 2>/dev/null`
     if test -z "$tmp_exp" || test "$tmp_exp" = "$1"; then
       tmp_exp=""
@@ -228,12 +228,7 @@ AC_DEFUN([CURL_CHECK_NATIVE_WINDOWS], [
       ])
     fi
   ])
-  case "$ac_cv_native_windows" in
-    yes)
-      AC_DEFINE_UNQUOTED(NATIVE_WINDOWS, 1,
-        [Define to 1 if you are building a native Windows target.])
-      ;;
-  esac
+  AM_CONDITIONAL(DOING_NATIVE_WINDOWS, test "x$ac_cv_native_windows" = xyes)
 ])
 
 

buildconf

@@ -6,7 +6,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -21,9 +21,12 @@
 #
 ###########################################################################
 
+#--------------------------------------------------------------------------
+# die prints argument string to stdout and exits this shell script.
+#
 die(){
-	echo "$@"
-	exit
+  echo "buildconf: $@"
+  exit 1
 }
 
 #--------------------------------------------------------------------------
@@ -33,11 +36,8 @@ die(){
 findtool(){
   file="$1"
 
-  if { echo $file | grep "/" >/dev/null 2>&1; } then
-    # we only check for the explicit file name if the file is given
-    # including a slash. Use ./ for current dir. Previously this would
-    # otherwise always cause findtool to search the local dir first, which
-    # is wrong.
+  if { echo "$file" | grep "/" >/dev/null 2>&1; } then
+    # when file is given with a path check it first
     if test -f "$file"; then
       echo "$file"
       return
@@ -80,16 +80,19 @@ removethis(){
 # Ensure that buildconf runs from the subdirectory where configure.ac lives
 #
 if test ! -f configure.ac ||
-  test ! -f src/main.c ||
+  test ! -f src/tool_main.c ||
   test ! -f lib/urldata.h ||
-  test ! -f include/curl/curl.h; then
+  test ! -f include/curl/curl.h ||
+  test ! -f m4/curl-functions.m4; then
   echo "Can not run buildconf from outside of curl's source subdirectory!"
   echo "Change to the subdirectory where buildconf is found, and try again."
   exit 1
 fi
 
 #--------------------------------------------------------------------------
-# autoconf 2.57 or newer
+# autoconf 2.57 or newer. Unpatched version 2.67 does not generate proper
+# configure script. Unpatched version 2.68 is simply unusable, we should
+# disallow 2.68 usage.
 #
 need_autoconf="2.57"
 ac_version=`${AUTOCONF:-autoconf} --version 2>/dev/null|head -n 1| sed -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'`
@@ -108,7 +111,15 @@ if test "$1" = "2" -a "$2" -lt "57" || test "$1" -lt "2"; then
   exit 1
 fi
 
-echo "buildconf: autoconf version $ac_version (ok)"
+if test "$1" = "2" -a "$2" -eq "67"; then
+  echo "buildconf: autoconf version $ac_version (BAD)"
+  echo "            Unpatched version generates broken configure script."
+elif test "$1" = "2" -a "$2" -eq "68"; then
+  echo "buildconf: autoconf version $ac_version (BAD)"
+  echo "            Unpatched version generates unusable configure script."
+else
+  echo "buildconf: autoconf version $ac_version (ok)"
+fi
 
 am4te_version=`${AUTOM4TE:-autom4te} --version 2>/dev/null|head -n 1| sed -e 's/autom4te\(.*\)/\1/' -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'`
 if test -z "$am4te_version"; then
@@ -178,27 +189,24 @@ else
 fi
 
 #--------------------------------------------------------------------------
-# libtool check
+# GNU libtool preliminary check
 #
-LIBTOOL_WANTED_MAJOR=1
-LIBTOOL_WANTED_MINOR=4
-LIBTOOL_WANTED_PATCH=2
-LIBTOOL_WANTED_VERSION=1.4.2
+want_lt_major=1
+want_lt_minor=4
+want_lt_patch=2
+want_lt_version=1.4.2
+
+# This approach that tries 'glibtool' first is intended for systems that
+# have GNU libtool named as 'glibtool' and libtool not being GNU's.
 
-# this approach that tries 'glibtool' first is some kind of work-around for
-# some BSD-systems I believe that use to provide the GNU libtool named
-# glibtool, with 'libtool' being something completely different.
 libtool=`findtool glibtool 2>/dev/null`
 if test ! -x "$libtool"; then
   libtool=`findtool ${LIBTOOL:-libtool}`
 fi
-
-if test -z "$LIBTOOLIZE"; then
-  # set the LIBTOOLIZE here so that glibtoolize is used if glibtool was found
-  # $libtool is already the full path
-  libtoolize="${libtool}ize"
-else
-  libtoolize=`findtool $LIBTOOLIZE`
+if test -z "$libtool"; then
+  echo "buildconf: libtool not found."
+  echo "            You need GNU libtool $want_lt_version or newer installed."
+  exit 1
 fi
 
 lt_pver=`$libtool --version 2>/dev/null|head -n 1`
@@ -206,42 +214,55 @@ lt_qver=`echo $lt_pver|sed -e "s/([^)]*)//g" -e "s/^[^0-9]*//g"`
 lt_version=`echo $lt_qver|sed -e "s/[- ].*//" -e "s/\([a-z]*\)$//"`
 if test -z "$lt_version"; then
   echo "buildconf: libtool not found."
-  echo "            You need libtool version $LIBTOOL_WANTED_VERSION or newer installed"
+  echo "            You need GNU libtool $want_lt_version or newer installed."
   exit 1
 fi
 old_IFS=$IFS; IFS='.'; set $lt_version; IFS=$old_IFS
 lt_major=$1
 lt_minor=$2
 lt_patch=$3
-lt_status="good"
 
-if test "$lt_major" = "$LIBTOOL_WANTED_MAJOR"; then
-   if test "$lt_minor" -lt "$LIBTOOL_WANTED_MINOR"; then
-      lt_status="bad"
-   elif test -n "$LIBTOOL_WANTED_PATCH"; then
-       if test "$lt_minor" -gt "$LIBTOOL_WANTED_MINOR"; then
-         lt_status="good"
-       elif test -n "$lt_patch"; then
-          if test "$lt_patch" -lt "$LIBTOOL_WANTED_PATCH"; then
-             lt_status="bad"
-          fi
-       else
-          lt_status="bad"
-       fi
-   fi
+if test -z "$lt_major"; then
+  lt_status="bad"
+elif test "$lt_major" -gt "$want_lt_major"; then
+  lt_status="good"
+elif test "$lt_major" -lt "$want_lt_major"; then
+  lt_status="bad"
+elif test -z "$lt_minor"; then
+  lt_status="bad"
+elif test "$lt_minor" -gt "$want_lt_minor"; then
+  lt_status="good"
+elif test "$lt_minor" -lt "$want_lt_minor"; then
+  lt_status="bad"
+elif test -z "$lt_patch"; then
+  lt_status="bad"
+elif test "$lt_patch" -gt "$want_lt_patch"; then
+  lt_status="good"
+elif test "$lt_patch" -lt "$want_lt_patch"; then
+  lt_status="bad"
+else
+  lt_status="good"
 fi
-if test $lt_status != "good"; then
+if test "$lt_status" != "good"; then
   echo "buildconf: libtool version $lt_version found."
-  echo "            You need libtool version $LIBTOOL_WANTED_VERSION or newer installed"
+  echo "            You need GNU libtool $want_lt_version or newer installed."
   exit 1
 fi
 
 echo "buildconf: libtool version $lt_version (ok)"
 
-if test -f "$libtoolize"; then
-  echo "buildconf: libtoolize found"
+#--------------------------------------------------------------------------
+# GNU libtoolize check
+#
+if test -z "$LIBTOOLIZE"; then
+  # use (g)libtoolize from same location as (g)libtool
+  libtoolize="${libtool}ize"
 else
-  echo "buildconf: libtoolize not found. Weird libtool installation!"
+  libtoolize=`findtool $LIBTOOLIZE`
+fi
+if test ! -f "$libtoolize"; then
+  echo "buildconf: libtoolize not found."
+  echo "            You need GNU libtoolize $want_lt_version or newer installed."
   exit 1
 fi
 
@@ -266,6 +287,10 @@ fi
 # perl check
 #
 PERL=`findtool ${PERL:-perl}`
+if test -z "$PERL"; then
+  echo "buildconf: perl not found"
+  exit 1
+fi
 
 #--------------------------------------------------------------------------
 # Remove files generated on previous buildconf/configure run.
@@ -301,6 +326,7 @@ for fname in .deps \
     libcurl.pc \
     libtool \
     libtool.m4 \
+    libtool.m4.tmp \
     ltmain.sh \
     ltoptions.m4 \
     ltsugar.m4 \
@@ -317,32 +343,49 @@ done
 #
 
 echo "buildconf: running libtoolize"
-$libtoolize --copy --automake --force || die "The libtoolize command failed"
+${libtoolize} --copy --automake --force || die "libtoolize command failed"
 
-if test ! -f m4/curl-functions.m4; then
-  echo "buildconf: cURL m4 macros not found"
-  exit 1
+# When using libtool 1.5.X (X < 26) we copy libtool.m4 to our local m4
+# subdirectory and this local copy is patched to fix some warnings that
+# are triggered when running aclocal and using autoconf 2.62 or later.
+
+if test "$lt_major" = "1" && test "$lt_minor" = "5"; then
+  if test -z "$lt_patch" || test "$lt_patch" -lt "26"; then
+    echo "buildconf: copying libtool.m4 to local m4 subdir"
+    ac_dir=`${ACLOCAL:-aclocal} --print-ac-dir`
+    if test -f $ac_dir/libtool.m4; then
+      cp -f $ac_dir/libtool.m4 m4/libtool.m4
+    else
+      echo "buildconf: $ac_dir/libtool.m4 not found"
+    fi
+    if test -f m4/libtool.m4; then
+      echo "buildconf: renaming some variables in local m4/libtool.m4"
+      $PERL -i.tmp -pe \
+        's/lt_prog_compiler_pic_works/lt_cv_prog_compiler_pic_works/g; \
+         s/lt_prog_compiler_static_works/lt_cv_prog_compiler_static_works/g;' \
+        m4/libtool.m4
+      rm -f m4/libtool.m4.tmp
+    fi
+  fi
+fi
+
+if test -f m4/libtool.m4; then
+  echo "buildconf: converting all mv to mv -f in local m4/libtool.m4"
+  $PERL -i.tmp -pe 's/\bmv +([^-\s])/mv -f $1/g' m4/libtool.m4
+  rm -f m4/libtool.m4.tmp
 fi
 
 echo "buildconf: running aclocal"
-${ACLOCAL:-aclocal} -I m4 $ACLOCAL_FLAGS || die "The aclocal command line failed"
+${ACLOCAL:-aclocal} -I m4 $ACLOCAL_FLAGS || die "aclocal command failed"
 
-if test -n "$PERL"; then
-  echo "buildconf: running aclocal hack to convert all mv to mv -f"
-  $PERL -i.bak -pe 's/\bmv +([^-\s])/mv -f $1/g' aclocal.m4
-else
-  echo "buildconf: perl not found"
-  exit 1
-fi
+echo "buildconf: converting all mv to mv -f in local aclocal.m4"
+$PERL -i.bak -pe 's/\bmv +([^-\s])/mv -f $1/g' aclocal.m4
 
 echo "buildconf: running autoheader"
-${AUTOHEADER:-autoheader} || die "The autoheader command failed"
-
-echo "buildconf: cp lib/curl_config.h.in src/curl_config.h.in"
-cp lib/curl_config.h.in src/curl_config.h.in
+${AUTOHEADER:-autoheader} || die "autoheader command failed"
 
 echo "buildconf: running autoconf"
-${AUTOCONF:-autoconf}     || die "The autoconf command failed"
+${AUTOCONF:-autoconf} || die "autoconf command failed"
 
 if test -d ares; then
   cd ares
@@ -352,14 +395,15 @@ if test -d ares; then
 fi
 
 echo "buildconf: running automake"
-${AUTOMAKE:-automake} -a -c  || die "The automake command failed"
+${AUTOMAKE:-automake} --add-missing --copy || die "automake command failed"
 
 #--------------------------------------------------------------------------
+# GNU libtool complementary check
+#
 # Depending on the libtool and automake versions being used, config.guess
 # might not be installed in the subdirectory until automake has finished.
 # So we can not attempt to use it until this very last buildconf stage.
 #
-
 if test ! -f ./config.guess; then
   echo "buildconf: config.guess not found"
 else
@@ -403,7 +447,7 @@ else
     if test "$lt_status" != "good"; then
       need_lt_version="$need_lt_major.$need_lt_minor.$need_lt_patch"
       echo "buildconf: libtool version $lt_version found."
-      echo "            $buildhost requires libtool $need_lt_version or newer installed."
+      echo "            $buildhost requires GNU libtool $need_lt_version or newer installed."
       rm -f configure
       exit 1
     fi
@@ -413,6 +457,5 @@ fi
 #--------------------------------------------------------------------------
 # Finished successfully.
 #
-
 echo "buildconf: OK"
 exit 0

buildconf.bat

@@ -27,11 +27,6 @@ if not exist include\curl\curlbuild.h.dist goto end_curlbuild_h
 copy /Y include\curl\curlbuild.h.dist include\curl\curlbuild.h
 :end_curlbuild_h
 
-REM create src\config-win32.h
-if not exist lib\config-win32.h goto end_config_win32_h
-copy /Y lib\config-win32.h src\config-win32.h
-:end_config_win32_h
-
 REM setup c-ares git tree
 if not exist ares\buildconf.bat goto end_c_ares
 cd ares

configure.ac

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -26,6 +26,7 @@ AC_PREREQ(2.57)
 dnl We don't know the version number "statically" so we use a dash here
 AC_INIT([curl], [-], [a suitable curl mailing list: http://curl.haxx.se/mail/])
 
+XC_OVR_ZZ50
 CURL_OVERRIDE_AUTOCONF
 
 dnl configure script copyright
@@ -34,7 +35,7 @@ This configure script may be copied, distributed and modified under the
 terms of the curl license; see COPYING for more details])
 
 AC_CONFIG_SRCDIR([lib/urldata.h])
-AM_CONFIG_HEADER(lib/curl_config.h src/curl_config.h include/curl/curlbuild.h)
+AM_CONFIG_HEADER(lib/curl_config.h include/curl/curlbuild.h)
 AC_CONFIG_MACRO_DIR([m4])
 AM_MAINTAINER_MODE
 
@@ -43,6 +44,7 @@ CURL_CHECK_OPTION_OPTIMIZE
 CURL_CHECK_OPTION_WARNINGS
 CURL_CHECK_OPTION_WERROR
 CURL_CHECK_OPTION_CURLDEBUG
+CURL_CHECK_OPTION_SYMBOL_HIDING
 CURL_CHECK_OPTION_ARES
 
 CURL_CHECK_PATH_SEPARATOR_REQUIRED
@@ -154,6 +156,7 @@ curl_tls_srp_msg="no      (--enable-tls-srp)"
    curl_ipv6_msg="no      (--enable-ipv6)"
     curl_idn_msg="no      (--with-libidn)"
  curl_manual_msg="no      (--enable-manual)"
+curl_libcurl_msg="enabled (--disable-libcurl-option)"
 curl_verbose_msg="enabled (--disable-verbose)"
    curl_sspi_msg="no      (--enable-sspi)"
    curl_ldap_msg="no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)"
@@ -234,21 +237,18 @@ esac
 AC_MSG_RESULT($mimpure)
 AM_CONDITIONAL(MIMPURE, test x$mimpure = xyes)
 
-dnl 'STATICLIB' is, in spite of its name, not generic but only for static-only
-dnl builds on Windows
-AM_CONDITIONAL(STATICLIB, false)
-
 AC_MSG_CHECKING([if we need BUILDING_LIBCURL])
+use_cppflag_building_libcurl="no"
+use_cppflag_curl_staticlib="no"
 case $host in
   *-*-mingw*)
-    AC_DEFINE(BUILDING_LIBCURL, 1, [when building libcurl itself])
     AC_MSG_RESULT(yes)
+    use_cppflag_building_libcurl="yes"
     AC_MSG_CHECKING([if we need CURL_STATICLIB])
     if test "X$enable_shared" = "Xno"
     then
-      AC_DEFINE(CURL_STATICLIB, 1, [when not building a shared library])
       AC_MSG_RESULT(yes)
-      AM_CONDITIONAL(STATICLIB, true)
+      use_cppflag_curl_staticlib="yes"
     else
       AC_MSG_RESULT(no)
     fi
@@ -257,6 +257,8 @@ case $host in
     AC_MSG_RESULT(no)
     ;;
 esac
+AM_CONDITIONAL(USE_CPPFLAG_BUILDING_LIBCURL, test x$use_cppflag_building_libcurl = xyes)
+AM_CONDITIONAL(USE_CPPFLAG_CURL_STATICLIB, test x$use_cppflag_curl_staticlib = xyes)
 
 # Determine whether all dependent libraries must be specified when linking
 if test "X$enable_shared" = "Xyes" -a "X$link_all_deplibs" = "Xno"
@@ -298,6 +300,7 @@ fi
 
 CURL_CHECK_COMPILER_HALT_ON_ERROR
 CURL_CHECK_COMPILER_ARRAY_SIZE_NEGATIVE
+CURL_CHECK_COMPILER_SYMBOL_HIDING
 
 CURL_CHECK_NO_UNDEFINED
 AM_CONDITIONAL(NO_UNDEFINED, test x$need_no_undefined = xyes)
@@ -650,6 +653,25 @@ AC_HELP_STRING([--disable-manual],[Disable built-in manual]),
 dnl The actual use of the USE_MANUAL variable is done much later in this
 dnl script to allow other actions to disable it as well.
 
+dnl ************************************************************
+dnl disable C code generation support
+dnl
+AC_MSG_CHECKING([whether to enable generation of C code])
+AC_ARG_ENABLE(libcurl_option,
+AC_HELP_STRING([--enable-libcurl-option],[Enable --libcurl C code generation support])
+AC_HELP_STRING([--disable-libcurl-option],[Disable --libcurl C code generation support]),
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_LIBCURL_OPTION, 1, [to disable --libcurl C code generation option])
+       curl_libcurl_msg="no"
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+
 dnl **********************************************************************
 dnl Checks for libraries.
 dnl **********************************************************************
@@ -675,6 +697,17 @@ then
                ])
 fi
 
+if test "$HAVE_GETHOSTBYNAME" != "1"
+then
+  dnl gethostbyname in the watt lib?
+  AC_CHECK_LIB(watt, gethostbyname,
+               [HAVE_GETHOSTBYNAME="1"
+               CPPFLAGS="-I/dev/env/WATT_ROOT/inc"
+               LDFLAGS="-L/dev/env/WATT_ROOT/lib"
+               LIBS="$LIBS -lwatt"
+               ])
+fi
+
 dnl At least one system has been identified to require BOTH nsl and socket
 dnl libs at the same time to link properly.
 if test "$HAVE_GETHOSTBYNAME" != "1"
@@ -1514,7 +1547,8 @@ if test X"$OPT_SSL" != Xno; then
                     RAND_egd \
                     ENGINE_cleanup \
                     CRYPTO_cleanup_all_ex_data \
-                    SSL_get_shutdown )
+                    SSL_get_shutdown \
+                    SSLv2_client_method )
 
     dnl Make an attempt to detect if this is actually yassl's headers and
     dnl OpenSSL emulation layer. We still leave everything else believing
@@ -1546,10 +1580,11 @@ if test X"$OPT_SSL" != Xno; then
        dnl when the ssl shared libs were found in a path that the run-time
        dnl linker doesn't search through, we need to add it to LD_LIBRARY_PATH
        dnl to prevent further configure tests to fail due to this
-
-       LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$LIB_OPENSSL"
-       export LD_LIBRARY_PATH
-       AC_MSG_NOTICE([Added $LIB_OPENSSL to LD_LIBRARY_PATH])
+       if test "x$cross_compiling" != "xyes"; then
+         LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$LIB_OPENSSL"
+         export LD_LIBRARY_PATH
+         AC_MSG_NOTICE([Added $LIB_OPENSSL to LD_LIBRARY_PATH])
+       fi
     fi
     CURL_CHECK_OPENSSL_API
   fi
@@ -1785,10 +1820,11 @@ if test "$OPENSSL_ENABLED" != "1"; then
           dnl linker doesn't search through, we need to add it to
           dnl LD_LIBRARY_PATH to prevent further configure tests to fail
           dnl due to this
-
-          LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$gtlslib"
-          export LD_LIBRARY_PATH
-          AC_MSG_NOTICE([Added $gtlslib to LD_LIBRARY_PATH])
+          if test "x$cross_compiling" != "xyes"; then 
+            LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$gtlslib"
+            export LD_LIBRARY_PATH
+            AC_MSG_NOTICE([Added $gtlslib to LD_LIBRARY_PATH])
+          fi
         fi
       fi
 
@@ -1799,17 +1835,33 @@ if test "$OPENSSL_ENABLED" != "1"; then
 fi dnl OPENSSL != 1
 
 dnl ---
-dnl If GnuTLS is enabled, we MUST verify that it uses libgcrypt since
-dnl curl code relies on that but recent GnuTLS versions can in fact build
-dnl with different crypto libraries which curl right now cannot handle
+dnl Check which crypto backend GnuTLS uses
 dnl ---
 
 if test "$GNUTLS_ENABLED" = "1"; then
-  AC_CHECK_LIB(gcrypt,
-               gcry_control, ,
-    [
-      AC_MSG_ERROR([need GnuTLS built with gcrypt to function with GnuTLS])
-    ])
+  USE_GNUTLS_NETTLE=
+  # First check if we can detect either crypto library via transitive linking
+  AC_CHECK_LIB(gnutls, nettle_MD5Init, [ USE_GNUTLS_NETTLE=1 ])
+  if test "$USE_GNUTLS_NETTLE" = ""; then
+    AC_CHECK_LIB(gnutls, gcry_control, [ USE_GNUTLS_NETTLE=0 ])
+  fi
+  # If not, try linking directly to both of them to see if they are available
+  if test "$USE_GNUTLS_NETTLE" = ""; then
+    AC_CHECK_LIB(nettle, nettle_MD5Init, [ USE_GNUTLS_NETTLE=1 ])
+  fi
+  if test "$USE_GNUTLS_NETTLE" = ""; then
+    AC_CHECK_LIB(gcrypt, gcry_control, [ USE_GNUTLS_NETTLE=0 ])
+  fi
+  if test "$USE_GNUTLS_NETTLE" = ""; then
+    AC_MSG_ERROR([GnuTLS found, but neither gcrypt nor nettle found])
+  fi
+  if test "$USE_GNUTLS_NETTLE" = "1"; then
+    AC_DEFINE(USE_GNUTLS_NETTLE, 1, [if GnuTLS uses nettle as crypto backend])
+    AC_SUBST(USE_GNUTLS_NETTLE, [1])
+    LIBS="$LIBS -lnettle"
+  else
+    LIBS="$LIBS -lgcrypt"
+  fi
 fi
 
 dnl ---
@@ -1895,12 +1947,12 @@ if test "$OPENSSL_ENABLED" != "1"; then
         dnl linker doesn't search through, we need to add it to
         dnl LD_LIBRARY_PATH to prevent further configure tests to fail
         dnl due to this
-
-        LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$polarssllib"
-        export LD_LIBRARY_PATH
-        AC_MSG_NOTICE([Added $polarssllib to LD_LIBRARY_PATH])
+        if test "x$cross_compiling" != "xyes"; then
+          LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$polarssllib"
+          export LD_LIBRARY_PATH
+          AC_MSG_NOTICE([Added $polarssllib to LD_LIBRARY_PATH])
+        fi
       fi
-
     fi
 
   fi dnl PolarSSL not disabled
@@ -1917,7 +1969,7 @@ OPT_CYASSL=no
 _cppflags=$CPPFLAGS
 _ldflags=$LDFLAGS
 AC_ARG_WITH(cyassl,dnl
-AC_HELP_STRING([--with-cyassl=PATH],[where to look for CyaSSL, PATH points to the installation root (default: /usr/local/cyassl)])
+AC_HELP_STRING([--with-cyassl=PATH],[where to look for CyaSSL, PATH points to the installation root (default: system lib default)])
 AC_HELP_STRING([--without-cyassl], [disable CyaSSL detection]),
   OPT_CYASSL=$withval)
 
@@ -1930,14 +1982,9 @@ if test "$OPENSSL_ENABLED" != "1"; then
     fi
 
     if test -z "$OPT_CYASSL" ; then
-      dnl check for lib in default first
+      dnl check for lib in system default first
 
-      trycyassldir="/usr/local/cyassl"
-
-      LDFLAGS="$LDFLAGS -L$trycyassldir/lib"
-      CPPFLAGS="$CPPFLAGS -I$trycyassldir/include"
-
-      AC_CHECK_LIB(cyassl, InitCyaSSL,
+      AC_CHECK_LIB(cyassl, CyaSSL_Init,
       dnl libcyassl found, set the variable
        [
          AC_DEFINE(USE_CYASSL, 1, [if CyaSSL is enabled])
@@ -1959,7 +2006,7 @@ if test "$OPENSSL_ENABLED" != "1"; then
          CPPFLAGS="$CPPFLAGS $addcflags"
       fi
 
-      AC_CHECK_LIB(cyassl, InitCyaSSL,
+      AC_CHECK_LIB(cyassl, CyaSSL_Init,
        [
        AC_DEFINE(USE_CYASSL, 1, [if CyaSSL is enabled])
        AC_SUBST(USE_CYASSL, [1])
@@ -1984,10 +2031,11 @@ if test "$OPENSSL_ENABLED" != "1"; then
         dnl linker doesn't search through, we need to add it to
         dnl LD_LIBRARY_PATH to prevent further configure tests to fail
         dnl due to this
-
-        LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$cyassllib"
-        export LD_LIBRARY_PATH
-        AC_MSG_NOTICE([Added $cyassllib to LD_LIBRARY_PATH])
+        if test "x$cross_compiling" != "xyes"; then
+          LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$cyassllib"
+          export LD_LIBRARY_PATH
+          AC_MSG_NOTICE([Added $cyassllib to LD_LIBRARY_PATH])
+        fi
       fi
 
     fi
@@ -2043,13 +2091,6 @@ if test "$OPENSSL_ENABLED" != "1" -a "$GNUTLS_ENABLED" != "1"; then
         nssprefix=$OPT_NSS
     fi
 
-    dnl Check for functionPK11_CreateGenericObject
-    dnl this is needed for using the PEM PKCS#11 module
-    AC_CHECK_LIB(nss3, PK11_CreateGenericObject,
-     [
-     AC_DEFINE(HAVE_PK11_CREATEGENERICOBJECT, 1, [if you have the function PK11_CreateGenericObject])
-     AC_SUBST(HAVE_PK11_CREATEGENERICOBJECT, [1])
-     ])
     if test -n "$addlib"; then
 
       CLEANLIBS="$LIBS"
@@ -2060,7 +2101,8 @@ if test "$OPENSSL_ENABLED" != "1" -a "$GNUTLS_ENABLED" != "1"; then
          CPPFLAGS="$CPPFLAGS $addcflags"
       fi
 
-      AC_CHECK_LIB(nss3, NSS_Initialize,
+      dnl The function PK11_CreateGenericObject is needed to load libnsspem.so
+      AC_CHECK_LIB(nss3, PK11_CreateGenericObject,
        [
        AC_DEFINE(USE_NSS, 1, [if NSS is enabled])
        AC_SUBST(USE_NSS, [1])
@@ -2076,14 +2118,23 @@ if test "$OPENSSL_ENABLED" != "1" -a "$GNUTLS_ENABLED" != "1"; then
       if test "x$USE_NSS" = "xyes"; then
         AC_MSG_NOTICE([detected NSS version $version])
 
+        dnl NSS_InitContext() was introduced in NSS 3.12.5 and helps to prevent
+        dnl collisions on NSS initialization/shutdown with other libraries
+        AC_CHECK_FUNC(NSS_InitContext,
+        [
+          AC_DEFINE(HAVE_NSS_INITCONTEXT, 1, [if you have the NSS_InitContext function])
+          AC_SUBST(HAVE_NSS_INITCONTEXT, [1])
+        ])
+
         dnl when shared libs were found in a path that the run-time
         dnl linker doesn't search through, we need to add it to
         dnl LD_LIBRARY_PATH to prevent further configure tests to fail
         dnl due to this
-
-        LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$nssprefix/lib$libsuff"
-        export LD_LIBRARY_PATH
-        AC_MSG_NOTICE([Added $nssprefix/lib$libsuff to LD_LIBRARY_PATH])
+        if test "x$cross_compiling" != "xyes"; then
+          LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$nssprefix/lib$libsuff"
+          export LD_LIBRARY_PATH
+          AC_MSG_NOTICE([Added $nssprefix/lib$libsuff to LD_LIBRARY_PATH])
+        fi
       fi
 
     fi
@@ -2240,10 +2291,11 @@ if test X"$OPT_LIBSSH2" != Xno; then
        dnl libssh2_session_handshake was added in 1.2.8
        AC_CHECK_FUNCS( libssh2_version libssh2_init libssh2_exit \
                        libssh2_scp_send64 libssh2_session_handshake)
-
-       LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$DIR_SSH2"
-       export LD_LIBRARY_PATH
-       AC_MSG_NOTICE([Added $DIR_SSH2 to LD_LIBRARY_PATH])
+       if test "x$cross_compiling" != "xyes"; then
+         LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$DIR_SSH2"
+         export LD_LIBRARY_PATH
+         AC_MSG_NOTICE([Added $DIR_SSH2 to LD_LIBRARY_PATH])
+       fi
     fi
   else
     dnl no libssh2, revert back to clean variables
@@ -2331,56 +2383,197 @@ if test X"$OPT_LIBRTMP" != Xno; then
 
 fi
 
+dnl **********************************************************************
+dnl Check for linker switch for versioned symbols
+dnl **********************************************************************
+
+versioned_symbols_flavour=
+AC_MSG_CHECKING([whether versioned symbols are wanted])
+AC_ARG_ENABLE(versioned-symbols,
+AC_HELP_STRING([--enable-versioned-symbols], [Enable versioned symbols in shared library])
+AC_HELP_STRING([--disable-versioned-symbols], [Disable versioned symbols in shared library]),
+[ case "$enableval" in
+  yes) AC_MSG_RESULT(yes)
+    AC_MSG_CHECKING([if libraries can be versioned])
+    GLD=`$LD --help < /dev/null 2>/dev/null | grep version-script`
+    if test -z "$GLD"; then
+        AC_MSG_RESULT(no)
+        AC_MSG_WARN([You need an ld version supporting the --version-script option])
+    else
+        AC_MSG_RESULT(yes)
+        if test "x$OPENSSL_ENABLED" = "x1"; then
+          versioned_symbols_flavour="OPENSSL_"
+        elif test "x$GNUTLS_ENABLED" == "x1"; then
+          versioned_symbols_flavour="GNUTLS_"
+        elif test "x$NSS_ENABLED" == "x1"; then
+          versioned_symbols_flavour="NSS_"
+        elif test "x$POLARSSL_ENABLED" == "x1"; then
+          versioned_symbols_flavour="POLARSSL_"
+        elif test "x$CYASSL_ENABLED" == "x1"; then
+          versioned_symbols_flavour="CYASSL_"
+        elif test "x$AXTLS_ENABLED" == "x1"; then
+          versioned_symbols_flavour="AXTLS_"
+        else
+          versioned_symbols_flavour=""
+        fi
+        versioned_symbols="yes"
+    fi
+    ;;
+
+  *)   AC_MSG_RESULT(no)
+    ;;
+  esac
+], [
+AC_MSG_RESULT(no)
+]
+)
+
+AC_SUBST(VERSIONED_FLAVOUR, ["$versioned_symbols_flavour"])
+AM_CONDITIONAL(VERSIONED_SYMBOLS, test "x$versioned_symbols" = "xyes")
+
+
 dnl **********************************************************************
 dnl Check for the presence of IDN libraries and headers
 dnl **********************************************************************
 
 AC_MSG_CHECKING([whether to build with libidn])
+OPT_IDN="default"
 AC_ARG_WITH(libidn,
 AC_HELP_STRING([--with-libidn=PATH],[Enable libidn usage])
 AC_HELP_STRING([--without-libidn],[Disable libidn usage]),
-  [LIBIDN="$withval"])
-
-case "$LIBIDN" in
+  [OPT_IDN=$withval])
+case "$OPT_IDN" in
   no)
-       AC_MSG_RESULT(no)
-       ;;
-  *)   AC_MSG_RESULT(yes)
-
-       idn=""
-       dnl if there is a given path, check that FIRST
-       if test -n "$LIBIDN"; then
-         if test "x$LIBIDN" != "xyes"; then
-            oldLDFLAGS=$LDFLAGS
-            oldCPPFLAGS=$CPPFLAGS
-            LDFLAGS="$LDFLAGS -L$LIBIDN/lib"
-            CPPFLAGS="$CPPFLAGS -I$LIBIDN/include"
-            idn="yes"
-            AC_CHECK_LIB(idn, idna_to_ascii_4i, ,
-                         idn=""
-                         LDFLAGS=$oldLDFLAGS
-                         CPPFLAGS=$oldCPPFLAGS)
-         fi
-       fi
-
-       if test "x$idn" != "xyes"; then
-          dnl check with default paths
-          idn="yes"
-          AC_CHECK_LIB(idn, idna_to_ascii_lz, ,
-                       idn="")
-       fi
-
-       if test "x$idn" = "xyes"; then
-         curl_idn_msg="enabled"
-         AC_SUBST(IDN_ENABLED, [1])
-         dnl different versions of libidn have different setups of these:
-         AC_CHECK_FUNCS( idn_free idna_strerror tld_strerror)
-         AC_CHECK_HEADERS( idn-free.h tld.h )
-       fi
-
-       ;;
+    dnl --without-libidn option used
+    want_idn="no"
+    AC_MSG_RESULT([no])
+    ;;
+  default)
+    dnl configure option not specified
+    want_idn="yes"
+    want_idn_path="default"
+    AC_MSG_RESULT([(assumed) yes])
+    ;;
+  yes)
+    dnl --with-libidn option used without path
+    want_idn="yes"
+    want_idn_path="default"
+    AC_MSG_RESULT([yes])
+    ;;
+  *)
+    dnl --with-libidn option used with path
+    want_idn="yes"
+    want_idn_path="$withval"
+    AC_MSG_RESULT([yes ($withval)])
+    ;;
 esac
 
+if test "$want_idn" = "yes"; then
+  dnl idn library support has been requested
+  clean_CPPFLAGS="$CPPFLAGS"
+  clean_LDFLAGS="$LDFLAGS"
+  clean_LIBS="$LIBS"
+  PKGCONFIG="no"
+  #
+  if test "$want_idn_path" != "default"; then
+    dnl path has been specified
+    IDN_PCDIR="$want_idn_path/lib$libsuff/pkgconfig"
+    CURL_CHECK_PKGCONFIG(libidn, [$IDN_PCDIR])
+    if test "$PKGCONFIG" != "no"; then
+      IDN_LIBS=`CURL_EXPORT_PCDIR([$IDN_PCDIR]) dnl
+        $PKGCONFIG --libs-only-l libidn 2>/dev/null`
+      IDN_LDFLAGS=`CURL_EXPORT_PCDIR([$IDN_PCDIR]) dnl
+        $PKGCONFIG --libs-only-L libidn 2>/dev/null`
+      IDN_CPPFLAGS=`CURL_EXPORT_PCDIR([$IDN_PCDIR]) dnl
+        $PKGCONFIG --cflags-only-I libidn 2>/dev/null`
+      IDN_DIR=`echo $IDN_LDFLAGS | $SED -e 's/-L//'`
+    else
+      dnl pkg-config not available or provides no info
+      IDN_LIBS="-lidn"
+      IDN_LDFLAGS="-L$want_idn_path/lib$libsuff"
+      IDN_CPPFLAGS="-I$want_idn_path/include"
+      IDN_DIR="$want_idn_path/lib$libsuff"
+    fi
+  else
+    dnl path not specified
+    CURL_CHECK_PKGCONFIG(libidn)
+    if test "$PKGCONFIG" != "no"; then
+      IDN_LIBS=`$PKGCONFIG --libs-only-l libidn 2>/dev/null`
+      IDN_LDFLAGS=`$PKGCONFIG --libs-only-L libidn 2>/dev/null`
+      IDN_CPPFLAGS=`$PKGCONFIG --cflags-only-I libidn 2>/dev/null`
+      IDN_DIR=`echo $IDN_LDFLAGS | $SED -e 's/-L//'`
+    else
+      dnl pkg-config not available or provides no info
+      IDN_LIBS="-lidn"
+    fi
+  fi
+  #
+  if test "$PKGCONFIG" != "no"; then
+    AC_MSG_NOTICE([pkg-config: IDN_LIBS: "$IDN_LIBS"])
+    AC_MSG_NOTICE([pkg-config: IDN_LDFLAGS: "$IDN_LDFLAGS"])
+    AC_MSG_NOTICE([pkg-config: IDN_CPPFLAGS: "$IDN_CPPFLAGS"])
+    AC_MSG_NOTICE([pkg-config: IDN_DIR: "$IDN_DIR"])
+  else
+    AC_MSG_NOTICE([IDN_LIBS: "$IDN_LIBS"])
+    AC_MSG_NOTICE([IDN_LDFLAGS: "$IDN_LDFLAGS"])
+    AC_MSG_NOTICE([IDN_CPPFLAGS: "$IDN_CPPFLAGS"])
+    AC_MSG_NOTICE([IDN_DIR: "$IDN_DIR"])
+  fi
+  #
+  CPPFLAGS="$IDN_CPPFLAGS $CPPFLAGS"
+  LDFLAGS="$IDN_LDFLAGS $LDFLAGS"
+  LIBS="$IDN_LIBS $LIBS"
+  #
+  AC_MSG_CHECKING([if idna_to_ascii_4i can be linked])
+  AC_LINK_IFELSE([
+    AC_LANG_FUNC_LINK_TRY([idna_to_ascii_4i])
+  ],[
+    AC_MSG_RESULT([yes])
+    tst_links_libidn="yes"
+  ],[
+    AC_MSG_RESULT([no])
+    tst_links_libidn="no"
+  ])
+  if test "$tst_links_libidn" = "no"; then
+    AC_MSG_CHECKING([if idna_to_ascii_lz can be linked])
+    AC_LINK_IFELSE([
+      AC_LANG_FUNC_LINK_TRY([idna_to_ascii_lz])
+    ],[
+      AC_MSG_RESULT([yes])
+      tst_links_libidn="yes"
+    ],[
+      AC_MSG_RESULT([no])
+      tst_links_libidn="no"
+    ])
+  fi
+  #
+  if test "$tst_links_libidn" = "yes"; then
+    AC_DEFINE(HAVE_LIBIDN, 1, [Define to 1 if you have the `idn' library (-lidn).])
+    dnl different versions of libidn have different setups of these:
+    AC_CHECK_FUNCS( idn_free idna_strerror tld_strerror )
+    AC_CHECK_HEADERS( idn-free.h tld.h )
+    if test "x$ac_cv_header_tld_h" = "xyes"; then
+      AC_SUBST([IDN_ENABLED], [1])
+      curl_idn_msg="enabled"
+      if test -n "$IDN_DIR"; then
+        LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$IDN_DIR"
+        export LD_LIBRARY_PATH
+        AC_MSG_NOTICE([Added $IDN_DIR to LD_LIBRARY_PATH])
+      fi
+    else
+      AC_MSG_WARN([Libraries for IDN support too old: IDN disabled])
+      CPPFLAGS="$clean_CPPFLAGS"
+      LDFLAGS="$clean_LDFLAGS"
+      LIBS="$clean_LIBS"
+    fi
+  else
+    AC_MSG_WARN([Cannot find libraries for IDN support: IDN disabled])
+    CPPFLAGS="$clean_CPPFLAGS"
+    LDFLAGS="$clean_LDFLAGS"
+    LIBS="$clean_LIBS"
+  fi
+fi
+
 
 dnl Let's hope this split URL remains working:
 dnl http://publibn.boulder.ibm.com/doc_link/en_US/a_doc_lib/aixprggd/ \
@@ -2866,48 +3059,9 @@ AC_HELP_STRING([--disable-cookies],[Disable cookies support]),
 )
 
 dnl ************************************************************
-dnl Enable hiding of internal symbols in library to reduce its size and
-dnl speed dynamic linking of applications.  This currently is only supported
-dnl on gcc >= 4.0 and SunPro C.
+dnl hiding of library internal symbols
 dnl
-AC_MSG_CHECKING([whether to enable hidden symbols in the library])
-AC_ARG_ENABLE(hidden-symbols,
-AC_HELP_STRING([--enable-hidden-symbols],[Hide internal symbols in library])
-AC_HELP_STRING([--disable-hidden-symbols],[Leave all symbols with default visibility in library]),
-[ case "$enableval" in
-  no)
-       AC_MSG_RESULT(no)
-       ;;
-  *)
-       AC_MSG_CHECKING([whether $CC supports it])
-       if test "$GCC" = yes ; then
-         if $CC --help --verbose 2>&1 | grep fvisibility= > /dev/null ||
-           dnl clang always supports -fvisibility= but it doesn't show up
-           dnl under --help.
-           test "$compiler_id" = "CLANG"; then
-           AC_MSG_RESULT(yes)
-           AC_DEFINE(CURL_HIDDEN_SYMBOLS, 1, [to enable hidden symbols])
-           AC_DEFINE(CURL_EXTERN_SYMBOL, [__attribute__ ((visibility ("default")))], [to make a symbol visible])
-           CFLAGS="$CFLAGS -fvisibility=hidden"
-         else
-            AC_MSG_RESULT(no)
-          fi
-
-       else
-         dnl Test for SunPro cc
-         if $CC 2>&1 | grep flags >/dev/null && $CC -flags | grep xldscope= >/dev/null ; then
-           AC_MSG_RESULT(yes)
-           AC_DEFINE(CURL_HIDDEN_SYMBOLS, 1, [to enable hidden symbols])
-           AC_DEFINE(CURL_EXTERN_SYMBOL, [__global], [to make a symbol visible])
-           CFLAGS="$CFLAGS -xldscope=hidden"
-         else
-           AC_MSG_RESULT(no)
-         fi
-       fi
-       ;;
-  esac ],
-       AC_MSG_RESULT(no)
-)
+CURL_CONFIGURE_SYMBOL_HIDING
 
 dnl ************************************************************
 dnl enforce SONAME bump
@@ -3108,6 +3262,7 @@ AC_CONFIG_FILES([Makefile \
            include/curl/Makefile \
            src/Makefile \
            lib/Makefile \
+           lib/libcurl.vers \
            tests/Makefile \
            tests/data/Makefile \
            tests/server/Makefile \
@@ -3136,31 +3291,32 @@ CURL_GENERATE_CONFIGUREHELP_PM
 
 AC_MSG_NOTICE([Configured to build curl/libcurl:
 
-  curl version:    ${CURLVERSION}
-  Host setup:      ${host}
-  Install prefix:  ${prefix}
-  Compiler:        ${CC}
-  SSL support:     ${curl_ssl_msg}
-  SSH support:     ${curl_ssh_msg}
-  zlib support:    ${curl_zlib_msg}
-  krb4 support:    ${curl_krb4_msg}
-  GSSAPI support:  ${curl_gss_msg}
-  SPNEGO support:  ${curl_spnego_msg}
-  TLS-SRP support: ${curl_tls_srp_msg}
-  resolver:        ${curl_res_msg}
-  ipv6 support:    ${curl_ipv6_msg}
-  IDN support:     ${curl_idn_msg}
-  Build libcurl:   Shared=${enable_shared}, Static=${enable_static}
-  Built-in manual: ${curl_manual_msg}
-  Verbose errors:  ${curl_verbose_msg}
-  SSPI support:    ${curl_sspi_msg}
-  ca cert bundle:  ${ca}
-  ca cert path:    ${capath}
-  LDAP support:    ${curl_ldap_msg}
-  LDAPS support:   ${curl_ldaps_msg}
-  RTSP support:    ${curl_rtsp_msg}
-  RTMP support:    ${curl_rtmp_msg}
-  Protocols:       ${SUPPORT_PROTOCOLS}
+  curl version:     ${CURLVERSION}
+  Host setup:       ${host}
+  Install prefix:   ${prefix}
+  Compiler:         ${CC}
+  SSL support:      ${curl_ssl_msg}
+  SSH support:      ${curl_ssh_msg}
+  zlib support:     ${curl_zlib_msg}
+  krb4 support:     ${curl_krb4_msg}
+  GSSAPI support:   ${curl_gss_msg}
+  SPNEGO support:   ${curl_spnego_msg}
+  TLS-SRP support:  ${curl_tls_srp_msg}
+  resolver:         ${curl_res_msg}
+  ipv6 support:     ${curl_ipv6_msg}
+  IDN support:      ${curl_idn_msg}
+  Build libcurl:    Shared=${enable_shared}, Static=${enable_static}
+  Built-in manual:  ${curl_manual_msg}
+  --libcurl option: ${curl_libcurl_msg}
+  Verbose errors:   ${curl_verbose_msg}
+  SSPI support:     ${curl_sspi_msg}
+  ca cert bundle:   ${ca}
+  ca cert path:     ${capath}
+  LDAP support:     ${curl_ldap_msg}
+  LDAPS support:    ${curl_ldaps_msg}
+  RTSP support:     ${curl_rtsp_msg}
+  RTMP support:     ${curl_rtmp_msg}
+  Protocols:        ${SUPPORT_PROTOCOLS}
 ])
 
 if test "x$soname_bump" = "xyes"; then

curl-config.in

@@ -142,9 +142,9 @@ while test $# -gt 0; do
 	   CURLLIBDIR=""
 	fi
 	if test "X@REQUIRE_LIB_DEPS@" = "Xyes"; then
-	  echo ${CURLLIBDIR}-lcurl @LDFLAGS@ @LIBCURL_LIBS@ @LIBS@
+	  echo ${CURLLIBDIR}-lcurl @LIBCURL_LIBS@ @LIBS@
 	else
-	  echo ${CURLLIBDIR}-lcurl @LDFLAGS@ @LIBS@
+	  echo ${CURLLIBDIR}-lcurl @LIBS@
 	fi
 	;;
 

docs/CONTRIBUTE

@@ -34,6 +34,7 @@
  3.3 How To Make a Patch without git
  3.4 How to get your changes into the main sources
  3.5 Write good commit messages
+ 3.6 Please don't send pull requests
 
 ==============================================================================
 
@@ -276,3 +277,27 @@
  and make sure that you have your own user and email setup correctly in git
  before you commit
 
+3.6 Please don't send pull requests
+
+ With git (and expecially github) it is easy and tempting to send a pull
+ request to one or more people in the curl project to have changes merged this
+ way instead of mailing patches to the curl-library mailing list.
+
+ We don't like that. We want them mailed for these reasons:
+
+ - Peer review. Anyone and everyone on the list can review, comment and
+   improve on the patch. Pull requests limit this ability.
+
+ - Anyone can merge the patch into their own trees for testing and those who
+   have push rights can push it to the main repo. It doesn't have to be anyone
+   the patch author knows beforehand.
+
+ - Commit messages can be tweaked and changed if merged locally instead of
+   using github. Merges directly on github requires the changes to be perfect
+   already, which they seldomly are.
+
+ - Merges on github prevents rebases and even enforces --no-ff which is a git
+   style we don't otherwise use in the project
+
+ However: once patches have been reviewed and deemed fine on list they are
+ perfectly OK to be pulled from a published git tree.

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: March 8, 2011 (http://curl.haxx.se/docs/faq.html)
+Updated: December 7, 2011 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _
                               ___| | | |  _ \| |
                              / __| | | | |_) | |
@@ -306,41 +306,10 @@ FAQ
   We don't know how many users that downloaded or installed curl and then
   never use it.
 
-  Some facts to use as input to the math:
+  In May 2012 Daniel did a counting game and came up with a number that may
+  be completely wrong or somewhat accurate. 300 million!
 
-  curl packages are downloaded from the curl.haxx.se and mirrors over a
-  million times per year. curl is installed by default with most Linux
-  distributions. curl is installed by default with Mac OS X. curl and libcurl
-  as used by numerous applications that include libcurl binaries in their
-  distribution packages (like Adobe Acrobat Reader and Google Earth).
-
-  More than a hundred known named companies use curl in commercial
-  environments and products and more than a hundred known named open source
-  projects depend on (lib)curl.
-
-  In a poll on the curl web site mid-2005, more than 50% of the 300+ answers
-  estimated a user base of one million users or more.
-
-  In March 2005, the "Linux Counter project" estimated a total Linux user base
-  of some 29 millions, while Netcraft detected some 4 million "active" Linux
-  based web servers. A guess is that a fair amount of these Linux
-  installations have curl installed.
-
-  The Debian project maintains statistics on packages installed by people
-  who have voluntarily run their package counting application.  In mid-2010,
-  libcurl3 was installed on over 55000 such systems (62% of reporting systems)
-  and was one of the 320 most popular installed packages (out of about 107000
-  possible packages).
-
-  All this taken together, there is no doubt that there are millions of
-  (lib)curl users.
-
-  http://curl.haxx.se/docs/companies.html
-  http://curl.haxx.se/docs/programs.html
-  http://curl.haxx.se/libcurl/using/apps.html
-  http://counter.li.org/estimates.php
-  http://news.netcraft.com/archives/2005/03/14/fedora_makes_rapid_progress.html
-  http://qa.debian.org/popcon.php?package=curl
+  See http://daniel.haxx.se/blog/2012/05/16/300m-users/
 
   1.11 Why don't you update ca-bundle.crt
 
@@ -726,6 +695,12 @@ FAQ
 
     curl --header "Host: www.example.com" http://127.0.0.1/
 
+  You can also opt to add faked host name entries to curl with the --resolve
+  option. That has the added benefit that things like redirects will also work
+  properly. The above operation would instead be done as:
+
+    curl --resolve www.example.com:80:127.0.0.1 http://www.example.com/
+
   3.20 How to SFTP from my user's home directory?
 
   Contrary to how FTP works, SFTP and SCP URLs specify the exact directory to

docs/INSTALL

@@ -217,9 +217,9 @@ Win32
    adjust as necessary. It is also possible to override these paths with
    environment variables, for example:
 
-     set ZLIB_PATH=c:\zlib-1.2.5
-     set OPENSSL_PATH=c:\openssl-0.9.8r
-     set LIBSSH2_PATH=c:\libssh2-1.2.8
+     set ZLIB_PATH=c:\zlib-1.2.7
+     set OPENSSL_PATH=c:\openssl-0.9.8x
+     set LIBSSH2_PATH=c:\libssh2-1.4.2
 
    ATTENTION: if you want to build with libssh2 support you have to use latest
    version 0.17 - previous versions will NOT work with 7.17.0 and later!
@@ -320,7 +320,7 @@ Win32
    documentation on how to compile zlib. Define the ZLIB_PATH environment
    variable to the location of zlib.h and zlib.lib, for example:
 
-     set ZLIB_PATH=c:\zlib-1.2.5
+     set ZLIB_PATH=c:\zlib-1.2.7
 
    Then run 'nmake vc-zlib' in curl's root directory.
 
@@ -334,7 +334,7 @@ Win32
    Before running nmake define the OPENSSL_PATH environment variable with
    the root/base directory of OpenSSL, for example:
 
-     set OPENSSL_PATH=c:\openssl-0.9.8q
+     set OPENSSL_PATH=c:\openssl-0.9.8x
 
    Then run 'nmake vc-ssl' or 'nmake vc-ssl-dll' in curl's root
    directory.  'nmake vc-ssl' will create a libcurl static and dynamic
@@ -392,7 +392,7 @@ Win32
 
      set BCCDIR=c:\Borland\BCC55
 
-   In order to build a plain vanilla version of curl and libcurl run the 
+   In order to build a plain vanilla version of curl and libcurl run the
    following command from curl's root directory:
 
      make borland
@@ -840,7 +840,30 @@ VxWorks
 
 Android
 =======
-   See the build notes in the Android.mk file.
+   Method using the static makefile:
+      - see the build notes in the Android.mk file.
+
+   Method using a configure cross-compile (tested with Android NDK r7b):
+      - prepare the toolchain of the Android NDK for standalone use; this can
+        be done by invoking the script:
+        ./tools/make-standalone-toolchain.sh
+        which creates a usual cross-compile toolchain. Lets assume that you put
+        this toolchain below /opt then invoke configure with something like:
+        export PATH=/opt/arm-linux-androideabi-4.4.3/bin:$PATH
+        ./configure --host=arm-linux-androideabi [more configure options]
+        make
+      - if you want to compile directly from our GIT repo you might run into
+        this issue with older automake stuff:
+        checking host system type...
+        Invalid configuration `arm-linux-androideabi':
+        system `androideabi' not recognized
+        configure: error: /bin/sh ./config.sub arm-linux-androideabi failed
+        this issue can be fixed with using more recent versions of config.sub
+        and config.guess which can be obtained here:
+        http://git.savannah.gnu.org/gitweb/?p=config.git;a=tree
+        you need to replace your system-own versions which usually can be
+        found in your automake folder:
+        find /usr -name config.sub
 
 
 CROSS COMPILE

docs/INTERNALS

@@ -39,11 +39,11 @@ Portability
  libssh2      0.16
  c-ares       1.6.0
  libidn       0.4.1
- cyassl       1.4.0
+ cyassl       2.0.0
  openldap     2.0
  MIT krb5 lib 1.2.4
  qsossl       V5R2M0
- NSS          3.11.x
+ NSS          3.12.x
  axTLS        1.2.7
  Heimdal      ?
 
@@ -68,7 +68,7 @@ Portability
  GNU Autoconf 2.57
  GNU Automake 1.7 (we currently avoid 1.10 due to Solaris-related bugs)
  GNU M4       1.4
- perl         4
+ perl         5.004
  roffit       0.5
  groff        ? (any version that supports "groff -Tps -man [in] [out]")
  ps2pdf (gs)  ?
@@ -104,9 +104,9 @@ Windows vs Unix
  Inside the source code, We make an effort to avoid '#ifdef [Your OS]'. All
  conditionals that deal with features *should* instead be in the format
  '#ifdef HAVE_THAT_WEIRD_FUNCTION'. Since Windows can't run configure scripts,
- we maintain two curl_config-win32.h files (one in lib/ and one in src/) that
- are supposed to look exactly as a curl_config.h file would have looked like on
- a Windows machine!
+ we maintain a curl_config-win32.h file in lib directory that is supposed to
+ look exactly as a curl_config.h file would have looked like on a Windows
+ machine!
 
  Generally speaking: always remember that this will be compiled on dozens of
  operating systems. Don't walk on the edge.

docs/KNOWN_BUGS

@@ -3,6 +3,15 @@ join in and help us correct one or more of these! Also be sure to check the
 changelog of the current development status, as one or more of these problems
 may have been fixed since this was written!
 
+78. curl and libcurl don't always signal the client properly when "sending"
+  zero bytes files - it makes for example the command line client not creating
+  any file at all. Like when using FTP.
+  http://curl.haxx.se/bug/view.cgi?id=3438362
+
+77. CURLOPT_FORBID_REUSE on a handle prevents NTLM from working since it
+  "absuses" the underlying connection re-use system and if connections are
+  forced to close they break the NTLM support.
+
 76. The SOCKET type in Win64 is 64 bits large (and thus so is curl_socket_t on
   that platform), and long is only 32 bits. It makes it impossible for
   curl_easy_getinfo() to return a socket properly with the CURLINFO_LASTSOCKET
@@ -12,12 +21,6 @@ may have been fixed since this was written!
   http://curl.haxx.se/mail/lib-2009-10/0024.html
   http://curl.haxx.se/bug/view.cgi?id=2944325
 
-74. The HTTP spec allows headers to be merged and become comma-separated
-  instead of being repeated several times. This also include Authenticate: and
-  Proxy-Authenticate: headers and while this hardly every happens in real life
-  it will confuse libcurl which does not properly support it for all headers -
-  like those Authenticate headers.
-
 73. if a connection is made to a FTP server but the server then just never
   sends the 220 response or otherwise is dead slow, libcurl will not
   acknowledge the connection timeout during that phase but only the "real"

docs/MAIL-ETIQUETTE

@@ -13,6 +13,7 @@ MAIL ETIQUETTE
   1.4 Subscription Required
   1.5 Moderation of new posters
   1.6 Handling trolls and spam
+  1.7 How to unsubscribe
 
  2. Sending mail
   2.1 Reply or New Mail
@@ -110,6 +111,20 @@ MAIL ETIQUETTE
 
   Don't feed the trolls!
 
+  1.7 How to unsubscribe
+
+  You unsubscribe the same way you subscribed in the first place. You go to
+  the page for the particular mailing list you're subscribed to and you enter
+  your email address and password and press the unsubscribe button.
+
+  Also, this information is included in the headers of every mail that is sent
+  out to all curl related mailing lists and there's footer in each mail that
+  links to the "admin" page on which you can unsubscribe and change other
+  options.
+
+  You NEVER EVER email the mailing list requesting someone else to get you off
+  the list.
+
 
 2. Sending mail
 

docs/MANUAL

@@ -328,7 +328,7 @@ POST (HTTP)
   If the content-type is not specified, curl will try to guess from the file
   extension (it only knows a few), or use the previously specified type (from
   an earlier file if several files are specified in a list) or else it will
-  using the default type 'text/plain'.
+  use the default type 'application/octet-stream'.
 
   Emulate a fill-in form with -F. Let's say you fill in three fields in a
   form. One field is a file name which to post, one field is your name and one

docs/Makefile.am

@@ -22,9 +22,9 @@
 
 AUTOMAKE_OPTIONS = foreign no-dependencies
 
-man_MANS = curl.1 curl-config.1
-GENHTMLPAGES = curl.html curl-config.html
-PDFPAGES = curl.pdf curl-config.pdf
+man_MANS = curl.1 curl-config.1 mk-ca-bundle.1
+GENHTMLPAGES = curl.html curl-config.html mk-ca-bundle.html
+PDFPAGES = curl.pdf curl-config.pdf mk-ca-bundle.pdf
 
 HTMLPAGES = $(GENHTMLPAGES) index.html
 

docs/THANKS

@@ -9,18 +9,24 @@ Aaron Orenstein
 Adam D. Moss
 Adam Light
 Adam Piggott
+Adam Tkac
 Adrian Schuur
+Adriano Meirelles
 Akos Pasztory
 Alan Pinstein
+Albert Chin
 Albert Chin-A-Young
 Albert Choy
 Ale Vesely
+Alejandro Alvarez
 Aleksandar Milivojevic
+Alessandro Ghedini
 Alessandro Vesely
 Alex Bligh
 Alex Fishman
 Alex Neblett
 Alex Suykov
+Alex Vinnik
 Alex aka WindEagle
 Alexander Beedie
 Alexander Kourakos
@@ -30,6 +36,7 @@ Alexander Zhuravlev
 Alexey Borzov
 Alexey Pesternikov
 Alexey Simak
+Alexey Zakhlestin
 Alexis Carvalho
 Alfred Gebert
 Allen Pulsifer
@@ -48,6 +55,7 @@ Andreas Rieke
 Andreas Schuldei
 Andreas Wurf
 Andrei Benea
+Andrei Cipu
 Andres Garcia
 Andrew Benham
 Andrew Biggs
@@ -64,10 +72,12 @@ Andy Tsouladze
 Angus Mackay
 Anthony Bryan
 Antoine Calando
+Anton Bychkov
 Anton Kalmykov
 Arkadiusz Miskiewicz
 Armel Asselin
 Arnaud Ebalard
+Arthur Murray
 Arve Knudsen
 Ates Goral
 Augustus Saunders
@@ -81,9 +91,11 @@ Ben Greear
 Ben Madsen
 Ben Noordhuis
 Ben Van Hof
+Ben Winslow
 Benbuck Nason
 Benjamin Gerard
 Bernard Leak
+Bernhard Reutner-Fischer
 Bertrand Demiddelaer
 Bill Egert
 Bill Hoffman
@@ -98,6 +110,7 @@ Brad Burdick
 Brad Hards
 Brad King
 Bradford Bruce
+Brandon Wang
 Brendan Jurd
 Brent Beardsley
 Brian Akins
@@ -114,7 +127,9 @@ Camille Moncelier
 Caolan McNamara
 Carsten Lange
 Casey O'Donnell
+Cedric Deltheil
 Chad Monroe
+Chandrakant Bagul
 Charles Kerr
 Chih-Chung Chang
 Chris "Bob Bob"
@@ -126,6 +141,8 @@ Chris Gaukroger
 Chris Maltby
 Chris Mumford
 Chris Smowton
+Christian Grothoff
+Christian Hagele
 Christian Krause
 Christian Kurz
 Christian Robottom Reis
@@ -136,6 +153,7 @@ Christophe Legry
 Christopher Conroy
 Christopher Palow
 Christopher R. Palmer
+Christopher Stone
 Ciprian Badescu
 Claes Jakobsson
 Clarence Gardner
@@ -150,6 +168,7 @@ Craig A West
 Craig Davison
 Craig Markwardt
 Cris Bailiff
+Cristian Rodriguez
 Curt Bogmine
 Cyrill Osterwalder
 Dagobert Michelsen
@@ -220,6 +239,7 @@ Dmitry Rechkin
 Dolbneff A.V
 Domenico Andreoli
 Dominick Meglio
+Dominique Leuenberger
 Doug Kaufman
 Doug Porter
 Douglas E. Wegscheid
@@ -260,6 +280,7 @@ Erwin Authried
 Eugene Kotlyarov
 Evan Jordan
 Eygene Ryabinkin
+Fabian Hiernaux
 Fabian Keil
 Fabrizio Ammollo
 Fedor Karpelevitch
@@ -272,11 +293,13 @@ Frank Keeney
 Frank McGeough
 Frank Meier
 Frank Ticheler
+Frank Van Uffelen
 Fred Machado
 Fred New
 Fred Noz
 Frederic Lepied
 Gabriel Kuri
+Garrett Holmstrom
 Gary Maxwell
 Gautam Kachroo
 Gautam Mani
@@ -300,6 +323,7 @@ Giuseppe Attardi
 Giuseppe D'Ambrosio
 Glen Nakamura
 Glen Scott
+Gokhan Sengun
 Grant Erickson
 Greg Hewgill
 Greg Morse
@@ -325,6 +349,7 @@ Heinrich Ko
 Hendrik Visage
 Henrik Storner
 Henry Ludemann
+Herve Amblard
 Hidemoto Nakada
 Hoi-Ho Chan
 Hongli Lai
@@ -366,6 +391,8 @@ Jan Kunder
 Jan Van Boghout
 Jared Lundell
 Jari Sundell
+Jason Glasgow
+Jason Liu
 Jason McDonald
 Jason S. Priebe
 Jay Austin
@@ -386,11 +413,13 @@ Jeffrey Pohlmeyer
 Jeremy Friesner
 Jerome Muffat-Meridol
 Jerome Vouillon
+Jerry Wu
 Jes Badwal
 Jesper Jensen
 Jesse Noller
 Jim Drash
 Jim Freeman
+Jim Hollinger
 Jim Meyering
 Jocelyn Jaubert
 Joe Halpin
@@ -400,11 +429,13 @@ Jofell Gallardo
 Johan Anderson
 Johan Nilsson
 Johan van Selst
+Johannes Bauer
 John Bradshaw
 John Crow
 John Dennis
 John E. Malmberg
 John Janssen
+John Joseph Bachir
 John Kelly
 John Lask
 John Lightsey
@@ -419,6 +450,7 @@ Jon Sargeant
 Jon Travis
 Jon Turner
 Jonas Forsman
+Jonas Schnelli
 Jonatan Lander
 Jonathan Hseu
 Jongki Suwandi
@@ -427,6 +459,7 @@ Josef Wolf
 Josh Kapell
 Joshua Kwan
 Josue Andrade Gomes
+Juan Barreto
 Juan F. Codagnone
 Juan Ignacio Herv<72>s
 Judson Bishop
@@ -434,6 +467,7 @@ Juergen Wilke
 Jukka Pihl
 Julian Noble
 Julien Chaffraix
+Julien Royer
 Jun-ichiro itojun Hagino
 Jurij Smakov
 Justin Fletcher
@@ -505,18 +539,22 @@ Luke Call
 Luong Dinh Dung
 Maciej Karpiuk
 Maciej W. Rozycki
+Mamoru Tasaka
+Mandy Wu
 Manfred Schwarb
 Manuel Massing
 Marc Boucher
 Marc Kleine-Budde
 Marcel Roelofs
 Marcelo Juchem
+Marcin Adamski
 Marcin Konicki
 Marco G. Salvagno
 Marco Maggi
 Marcus Sundberg
 Marcus Webster
 Mario Schroeder
+Mark Brand
 Mark Butler
 Mark Davies
 Mark Eichin
@@ -555,6 +593,7 @@ Mauro Iorio
 Max Katsev
 Maxim Ivanov
 Maxim Perenesenko
+Maxim Prohorov
 Mehmet Bozkurt
 Mekonikum
 Mettgut Jamalla
@@ -562,10 +601,12 @@ Michael Benedict
 Michael Calmer
 Michael Cronenworth
 Michael Curtis
+Michael Day
 Michael Goffioul
 Michael Jahn
 Michael Jerris
 Michael Mealling
+Michael Mueller
 Michael Smith
 Michael Stillwell
 Michael Wallner
@@ -591,6 +632,7 @@ Moonesamy
 Nathan Coulter
 Nathan O'Sullivan
 Nathanael Nerode
+Naveen Chandran
 Naveen Noel
 Neil Dunbar
 Neil Spring
@@ -608,6 +650,7 @@ Nikita Schmidt
 Nikitinskit Dmitriy
 Niklas Angebrand
 Nikolai Kondrashov
+Nikos Mavrogiannopoulos
 Ning Dong
 Nir Soffer
 Nis Jorgensen
@@ -620,14 +663,17 @@ Olaf St
 Oren Tirosh
 Ori Avtalion
 P R Schaffner
+Paolo Piacentini
 Pascal Terjan
 Pasha Kuznetsov
 Pat Ray
+Patrice Guerin
 Patrick Bihan-Faou
 Patrick Monnerat
 Patrick Scott
 Patrick Smith
 Patrik Thunstrom
+Pau Garcia i Quiles
 Paul Harrington
 Paul Howarth
 Paul Marquis
@@ -645,6 +691,7 @@ Pete Su
 Peter Bray
 Peter Forret
 Peter Heuchert
+Peter Hjalmarsson
 Peter Korsgaard
 Peter Lamberg
 Peter O'Gorman
@@ -668,6 +715,7 @@ Philippe Vaucher
 Pierre
 Pierre Brico
 Pierre Joye
+Pierre Ynard
 Pooyan McSporran
 Pramod Sharma
 Puneet Pawaia
@@ -694,6 +742,7 @@ Renaud Duhaut
 Rene Bernhardt
 Rene Rebe
 Reuven Wachtfogel
+Reza Arbab
 Ricardo Cadime
 Rich Gray
 Rich Rauenzahn
@@ -710,11 +759,13 @@ Rick Richardson
 Rob Crittenden
 Rob Jones
 Rob Stanzel
+Rob Ward
 Robert A. Monat
 Robert D. Young
 Robert Foreman
 Robert Iakobashvili
 Robert Olson
+Robert Schumann
 Robert Weaver
 Robin Cornelius
 Robin Johnson
@@ -783,6 +834,8 @@ Stephen Kick
 Stephen More
 Sterling Hughes
 Steve Green
+Steve H Truong
+Steve Holme
 Steve Lhomme
 Steve Little
 Steve Marx
@@ -791,6 +844,7 @@ Steve Roskowski
 Steven Bazyl
 Steven G. Johnson
 Steven M. Schweda
+Steven Parkes
 Stoned Elipot
 Sven Anders
 Sven Neuhaus
@@ -798,10 +852,12 @@ Sven Wegener
 S<EFBFBD>bastien Willemijns
 T. Bharath
 T. Yamada
+Taneli Vahakangas
 Tanguy Fautre
 Temprimus
 Thomas J. Moore
 Thomas Klausner
+Thomas L. Shinnick
 Thomas Lopatic
 Thomas Schwinge
 Thomas Tonino
@@ -810,6 +866,7 @@ Tim Baker
 Tim Bartley
 Tim Chen
 Tim Costello
+Tim Harder
 Tim Newsome
 Tim Sneddon
 Tinus van den Berg
@@ -817,6 +874,7 @@ Tobias Rundstr
 Toby Peterson
 Todd A Ouska
 Todd Kulesza
+Todd Ouska
 Todd Vierling
 Tom Benoist
 Tom Donovan
@@ -825,6 +883,7 @@ Tom Mattison
 Tom Moers
 Tom Mueller
 Tom Regner
+Tom Wright
 Tom Zerucha
 Tomas Pospisek
 Tomas Szepe
@@ -832,6 +891,7 @@ Tomasz Lacki
 Tommie Gannert
 Tommy Tam
 Ton Voon
+Toni Moreno
 Toon Verwaest
 Tor Arntsen
 Torsten Foertsch
@@ -854,11 +914,13 @@ Vincent Sanders
 Vincent Torri
 Vlad Grachov
 Vlad Ureche
+Vladimir Grishchenko
 Vladimir Lazarenko
 Vojtech Janota
 Vojtech Minarik
 Vsevolod Novikov
 Walter J. Mack
+Ward Willats
 Wayne Haigh
 Werner Koch
 Wesley Laxton
@@ -866,10 +928,12 @@ Wesley Miaw
 Wez Furlong
 Wilfredo Sanchez
 Wojciech Zwiefka
+Wu Yongzheng
 Xavier Bouchoux
 Yang Tse
 Yarram Sunil
 Yehoshua Hershberg
+Yukihiro Kawada
 Yuriy Sosov
 Yves Lejeune
 Zmey Petroff

docs/TODO

@@ -17,6 +17,7 @@
  1.4 signal-based resolver timeouts
  1.5 get rid of PATH_MAX
  1.6 progress callback without doubles
+ 1.7 Happy Eyeball dual stack connect
 
  2. libcurl - multi interface
  2.1 More non-blocking
@@ -60,45 +61,57 @@
  8.3 check connection
  8.4 non-gcrypt
 
- 9. Other protocols
+ 9. SMTP
+ 9.1 Other authentication mechanims
+ 9.2 Specify the preferred authentication mechanism
+ 9.3 Initial response
+ 9.4 Pipelining
+ 
+ 10. POP3
+ 10.1 APOP Authentication
+ 10.2 Other authentication mechanims
+ 10.3 auth= in URLs
+ 
+ 11. Other protocols
 
- 10. New protocols
- 10.1 RSYNC
+ 12. New protocols
+ 12.1 RSYNC
 
- 11. Client
- 11.1 sync
- 11.2 glob posts
- 11.3 prevent file overwriting
- 11.4 simultaneous parallel transfers
- 11.5 provide formpost headers
- 11.6 url-specific options
- 11.7 metalink support
- 11.8 warning when setting an option
- 11.9 IPv6 addresses with globbing
+ 13. Client
+ 13.1 sync
+ 13.2 glob posts
+ 13.3 prevent file overwriting
+ 13.4 simultaneous parallel transfers
+ 13.5 provide formpost headers
+ 13.6 url-specific options
+ 13.7 metalink support
+ 13.8 warning when setting an option
+ 13.9 IPv6 addresses with globbing
 
- 12. Build
- 12.1 roffit
+ 14. Build
+ 14.1 roffit
 
- 13. Test suite
- 13.1 SSL tunnel
- 13.2 nicer lacking perl message
- 13.3 more protocols supported
- 13.4 more platforms supported
+ 15. Test suite
+ 15.1 SSL tunnel
+ 15.2 nicer lacking perl message
+ 15.3 more protocols supported
+ 15.4 more platforms supported
 
- 14. Next SONAME bump
- 14.1 http-style HEAD output for ftp
- 14.2 combine error codes
- 14.3 extend CURLOPT_SOCKOPTFUNCTION prototype
+ 16. Next SONAME bump
+ 16.1 http-style HEAD output for ftp
+ 16.2 combine error codes
+ 16.3 extend CURLOPT_SOCKOPTFUNCTION prototype
 
- 15. Next major release
- 15.1 cleanup return codes
- 15.2 remove obsolete defines
- 15.3 size_t
- 15.4 remove several functions
- 15.5 remove CURLOPT_FAILONERROR
- 15.6 remove CURLOPT_DNS_USE_GLOBAL_CACHE
- 15.7 remove progress meter from libcurl
- 15.8 remove 'curl_httppost' from public
+ 17. Next major release
+ 17.1 cleanup return codes
+ 17.2 remove obsolete defines
+ 17.3 size_t
+ 17.4 remove several functions
+ 17.5 remove CURLOPT_FAILONERROR
+ 17.6 remove CURLOPT_DNS_USE_GLOBAL_CACHE
+ 17.7 remove progress meter from libcurl
+ 17.8 remove 'curl_httppost' from public
+ 17.9 have form functions use CURL handle argument
 
 ==============================================================================
 
@@ -146,6 +159,19 @@
  have both co-exist for a forseeable time until we can remove the double-using
  one.
 
+1.7 Happy Eyeball dual stack connect
+
+ In order to make alternative technologies not suffer when transitioning, like
+ when introducing IPv6 as an alternative to IPv4 and there are more than one
+ option existing simultaneously there are reasons to reconsider internal
+ choices.
+
+ To make libcurl do blazing fast IPv6 in a dual-stack configuration, this needs
+ to be addressed:
+
+    http://tools.ietf.org/html/rfc6555
+
+
 2. libcurl - multi interface
 
 2.1 More non-blocking
@@ -155,7 +181,6 @@
 
  - Name resolves on non-windows unless c-ares is used
  - NSS SSL connections
- - Active FTP connections
  - HTTP proxy CONNECT operations
  - SOCKS proxy handshakes
  - file:// transfers
@@ -346,18 +371,65 @@ to provide the data to send.
  The correct fix would be to detect which crypto layer that is in use and
  adapt our code to use that instead of blindly assuming gcrypt.
 
-9. Other protocols
+9. SMTP
 
-10. New protocols
+9.1 Other authentication mechanims
 
-10.1 RSYNC
+ Add support for other authentication mechanisms such as digest-md5 and
+ gssapi.
 
- There's no RFC for protocol nor URI/URL format.  An implementation should
- most probably use an existing rsync library, such as librsync.
+9.2 Specify the preferred authentication mechanism
 
-11. Client
+ Add the ability to specify the preferred authentication mechanism or a list
+ of mechanims that should be used. Not only that, but the order that is
+ returned by the server during the EHLO response should be honored by curl.
+ 
+9.3 Initial response
 
-11.1 sync
+ Add the ability for the user to specify whether the initial response is
+ included in the AUTH command. Some email servers, such as Microsoft
+ Exchange, can work with either whilst others need to have the initial
+ response sent separately:
+ 
+ http://curl.haxx.se/mail/lib-2012-03/0114.html
+ 
+9.4 Pipelining
+
+ Add support for pipelining emails.
+ 
+10. POP3
+
+10.1 APOP Authentication
+
+ Add support for the APOP command rather than using plain text authentication
+ (USER and PASS) as this is very week security wise. Note: The APOP command
+ is specified as "APOP <username> <md5 password>", however, it isn't
+ supported by all mail servers.
+ 
+10.2 Other authentication mechanims
+
+ SASL offers support for additional authentication mechanisms via the AUTH
+ command. Detection of an email server's support for SASL authentication
+ can be detected via the CAPA command whilst a list of supported mechanisms
+ can be retrieved with an empty AUTH command.
+ 
+10.3 auth= in URLs
+
+ Being able to specify the preferred authentication mechanim in the URL as
+ per RFC-2384 (http://tools.ietf.org/html/rfc2384).
+ 
+11. Other protocols
+
+12. New protocols
+
+12.1 RSYNC
+
+ There's no RFC for the protocol or an URI/URL format.  An implementation
+ should most probably use an existing rsync library, such as librsync.
+
+13. Client
+
+13.1 sync
 
  "curl --sync http://example.com/feed[1-100].rss" or
  "curl --sync http://example.net/{index,calendar,history}.html"
@@ -366,12 +438,12 @@ to provide the data to send.
  remote file is newer than the local file. A Last-Modified HTTP date header
  should also be used to set the mod date on the downloaded file.
 
-11.2 glob posts
+13.2 glob posts
 
  Globbing support for -d and -F, as in 'curl -d "name=foo[0-9]" URL'.
  This is easily scripted though.
 
-11.3 prevent file overwriting
+13.3 prevent file overwriting
 
  Add an option that prevents cURL from overwriting existing local files. When
  used, and there already is an existing file with the target file name
@@ -379,14 +451,14 @@ to provide the data to send.
  existing). So that index.html becomes first index.html.1 and then
  index.html.2 etc.
 
-11.4 simultaneous parallel transfers
+13.4 simultaneous parallel transfers
 
  The client could be told to use maximum N simultaneous parallel transfers and
  then just make sure that happens. It should of course not make more than one
  connection to the same remote host. This would require the client to use the
  multi interface. http://curl.haxx.se/bug/feature.cgi?id=1558595
 
-11.5 provide formpost headers
+13.5 provide formpost headers
 
  Extending the capabilities of the multipart formposting. How about leaving
  the ';type=foo' syntax as it is and adding an extra tag (headers) which
@@ -400,7 +472,7 @@ to provide the data to send.
  which should overwrite the program reasonable defaults (plain/text,
  8bit...)
 
-11.6 url-specific options
+13.6 url-specific options
 
  Provide a way to make options bound to a specific URL among several on the
  command line. Possibly by letting ':' separate options between URLs,
@@ -414,62 +486,62 @@ to provide the data to send.
 
  The example would do a POST-GET-POST combination on a single command line.
 
-11.7 metalink support
+13.7 metalink support
 
  Add metalink support to curl (http://www.metalinker.org/). This is most useful
  with simultaneous parallel transfers (11.6) but not necessary.
 
-11.8 warning when setting an option
+13.8 warning when setting an option
 
   Display a warning when libcurl returns an error when setting an option.
   This can be useful to tell when support for a particular feature hasn't been
   compiled into the library.
 
-11.9 IPv6 addresses with globbing
+13.9 IPv6 addresses with globbing
 
   Currently the command line client needs to get url globbing disabled (with
   -g) for it to support IPv6 numerical addresses. This is a rather silly flaw
   that should be corrected. It probably involves a smarter detection of the
   '[' and ']' letters.
 
-12. Build
+14. Build
 
-12.1 roffit
+14.1 roffit
 
  Consider extending 'roffit' to produce decent ASCII output, and use that
  instead of (g)nroff when building src/hugehelp.c
 
-13. Test suite
+15. Test suite
 
-13.1 SSL tunnel
+15.1 SSL tunnel
 
  Make our own version of stunnel for simple port forwarding to enable HTTPS
  and FTP-SSL tests without the stunnel dependency, and it could allow us to
  provide test tools built with either OpenSSL or GnuTLS
 
-13.2 nicer lacking perl message
+15.2 nicer lacking perl message
 
  If perl wasn't found by the configure script, don't attempt to run the tests
  but explain something nice why it doesn't.
 
-13.3 more protocols supported
+15.3 more protocols supported
 
  Extend the test suite to include more protocols. The telnet could just do ftp
  or http operations (for which we have test servers).
 
-13.4 more platforms supported
+15.4 more platforms supported
 
  Make the test suite work on more platforms. OpenBSD and Mac OS. Remove
  fork()s and it should become even more portable.
 
-14. Next SONAME bump
+16. Next SONAME bump
 
-14.1 http-style HEAD output for ftp
+16.1 http-style HEAD output for ftp
 
  #undef CURL_FTP_HTTPSTYLE_HEAD in lib/ftp.c to remove the HTTP-style headers
  from being output in NOBODY requests over ftp
 
-14.2 combine error codes
+16.2 combine error codes
 
  Combine some of the error codes to remove duplicates.  The original
  numbering should not be changed, and the old identifiers would be
@@ -487,29 +559,29 @@ to provide the data to send.
     CURLE_TFTP_NOTFOUND => CURLE_REMOTE_FILE_NOT_FOUND
     CURLE_TFTP_PERM => CURLE_REMOTE_ACCESS_DENIED
 
-14.3 extend CURLOPT_SOCKOPTFUNCTION prototype
+16.3 extend CURLOPT_SOCKOPTFUNCTION prototype
 
  The current prototype only provides 'purpose' that tells what the
  connection/socket is for, but not any protocol or similar. It makes it hard
  for applications to differentiate on TCP vs UDP and even HTTP vs FTP and
  similar.
 
-15. Next major release
+17. Next major release
 
-15.1 cleanup return codes
+17.1 cleanup return codes
 
  curl_easy_cleanup() returns void, but curl_multi_cleanup() returns a
  CURLMcode. These should be changed to be the same.
 
-15.2 remove obsolete defines
+17.2 remove obsolete defines
 
  remove obsolete defines from curl/curl.h
 
-15.3 size_t
+17.3 size_t
 
  make several functions use size_t instead of int in their APIs
 
-15.4 remove several functions
+17.4 remove several functions
 
  remove the following functions from the public API:
 
@@ -530,18 +602,18 @@ to provide the data to send.
 
  curl_multi_socket_all
 
-15.5 remove CURLOPT_FAILONERROR
+17.5 remove CURLOPT_FAILONERROR
 
  Remove support for CURLOPT_FAILONERROR, it has gotten too kludgy and weird
  internally. Let the app judge success or not for itself.
 
-15.6 remove CURLOPT_DNS_USE_GLOBAL_CACHE
+17.6 remove CURLOPT_DNS_USE_GLOBAL_CACHE
 
  Remove support for a global DNS cache. Anything global is silly, and we
  already offer the share interface for the same functionality but done
  "right".
 
-15.7 remove progress meter from libcurl
+17.7 remove progress meter from libcurl
 
  The internally provided progress meter output doesn't belong in the library.
  Basically no application wants it (apart from curl) but instead applications
@@ -551,7 +623,7 @@ to provide the data to send.
  variable types passed to it instead of doubles so that big files work
  correctly.
 
-15.8 remove 'curl_httppost' from public
+17.8 remove 'curl_httppost' from public
 
  curl_formadd() was made to fill in a public struct, but the fact that the
  struct is public is never really used by application for their own advantage
@@ -559,3 +631,11 @@ to provide the data to send.
 
  Changing them to return a private handle will benefit the implementation and
  allow us much greater freedoms while still maintining a solid API and ABI.
+
+17.9 have form functions use CURL handle argument
+
+ curl_formadd() and curl_formget() both currently have no CURL handle
+ argument, but both can use a callback that is set in the easy handle, and
+ thus curl_formget() with callback cannot function without first having
+ curl_easy_perform() (or similar) called - which is hard to grasp and a design
+ mistake.

docs/curl-config.1

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -93,7 +93,6 @@ What's the installed libcurl version?
 
 How do I build a single file with a one-line command?
 
-  $ `curl-config --cc --cflags --libs` -o example example.c
-
+  $ `curl-config --cc --cflags` -o example example.c `curl-config --libs`
 .SH "SEE ALSO"
 .BR curl (1)

docs/curl.1

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -20,7 +20,7 @@
 .\" *
 .\" **************************************************************************
 .\"
-.TH curl 1 "14 April 2009" "Curl 7.21.6" "Curl Manual"
+.TH curl 1 "16 February 2012" "Curl 7.25.0" "Curl Manual"
 .SH NAME
 curl \- transfer a URL
 .SH SYNOPSIS
@@ -110,7 +110,8 @@ the --option version of them. (This concept with --no options was added in
 7.19.0. Previously most options were toggled on/off on repeated use of the
 same command line option.)
 .IP "-#, --progress-bar"
-Make curl display progress information as a progress bar instead of the
+Make curl display progress as a simple progress bar instead of the standard,
+more informational, meter.
 .IP "-0, --http1.0"
 (HTTP) Forces curl to issue its requests using HTTP 1.0 instead of using its
 internally preferred: HTTP 1.1.
@@ -363,7 +364,7 @@ passive mode you need to not use \fI-P, --ftp-port\fP or force it with
 transfers. Curl will normally always first attempt to use EPSV before PASV,
 but with this option, it will not try using EPSV.
 
-\fB--epsv\fP can be used to explicitly enable EPRT again and \fB--no-epsv\fP
+\fB--epsv\fP can be used to explicitly enable EPSV again and \fB--no-epsv\fP
 is an alias for \fB--disable-epsv\fP.
 
 Disabling EPSV only changes the passive behavior. If you want to switch to
@@ -433,13 +434,15 @@ may be loaded.
 If this option is used several times, the last one will be used.
 .IP "--capath <CA certificate directory>"
 (SSL) Tells curl to use the specified certificate directory to verify the
-peer. The certificates must be in PEM format, and if curl is built against
-OpenSSL, the directory must have been processed using the c_rehash utility
-supplied with OpenSSL. Using \fI--capath\fP can allow OpenSSL-powered curl to
-make SSL-connections much more efficiently than using \fI--cacert\fP if the
-\fI--cacert\fP file contains many CA certificates.
+peer. Multiple paths can be provided by separating them with ":" (e.g.
+\&"path1:path2:path3"). The certificates must be in PEM format, and if curl is
+built against OpenSSL, the directory must have been processed using the
+c_rehash utility supplied with OpenSSL. Using \fI--capath\fP can allow
+OpenSSL-powered curl to make SSL-connections much more efficiently than using
+\fI--cacert\fP if the \fI--cacert\fP file contains many CA certificates.
 
-If this option is used several times, the last one will be used.
+If this option is set, the default capath value will be ignored, and if it is
+used several times, the last one will be used.
 .IP "-f, --fail"
 (HTTP) Fail silently (no output at all) on server errors. This is mostly done
 to better enable scripts etc to better deal with failed attempts. In
@@ -592,7 +595,9 @@ header will be used instead of the internal one. This allows you to make even
 trickier stuff than curl would normally do. You should not replace internally
 set headers without knowing perfectly well what you're doing. Remove an
 internal header by giving a replacement without content on the right side of
-the colon, as in: -H \&"Host:".
+the colon, as in: -H \&"Host:". If you send the custom header with no-value then
+its header must be terminated with a semicolon, such as \-H "X-Custom-Header;"
+to send "X-Custom-Header:".
 
 curl will make sure that each header you add/replace is sent with the proper
 end-of-line marker, you should thus \fBnot\fP add that as a part of the header
@@ -706,7 +711,8 @@ currently effective on operating systems offering the TCP_KEEPIDLE and
 TCP_KEEPINTVL socket options (meaning Linux, recent AIX, HP-UX and more). This
 option has no effect if \fI--no-keepalive\fP is used. (Added in 7.18.0)
 
-If this option is used multiple times, the last occurrence sets the amount.
+If this option is used multiple times, the last occurrence sets the amount. If
+unspecified, the option defaults to 60 seconds.
 .IP "--key <key>"
 (SSL/SSH) Private key file name. Allows you to provide your private key in this
 separate file.
@@ -756,13 +762,9 @@ was 301, 302, or 303. If the response code was any other 3xx code, curl will
 re-send the following request using the same unmodified method.
 .IP "--libcurl <file>"
 Append this option to any ordinary curl command line, and you will get a
-libcurl-using source code written to the file that does the equivalent
+libcurl-using C source code written to the file that does the equivalent
 of what your command-line operation does!
 
-NOTE: this does not properly support -F and the sending of multipart
-formposts, so in those cases the output program will be missing necessary
-calls to \fIcurl_formadd(3)\fP, and possibly more.
-
 If this option is used several times, the last given file name will be
 used. (Added in 7.16.1)
 .IP "--limit-rate <speed>"
@@ -800,6 +802,12 @@ useful for preventing your batch jobs from hanging for hours due to slow
 networks or links going down.  See also the \fI--connect-timeout\fP option.
 
 If this option is used several times, the last one will be used.
+.IP "--mail-auth <address>"
+(SMTP) Specify a single address. This will be used to specify the
+authentication address (identity) of a submitted message that is being relayed
+to another server.
+
+(Added in 7.25.0)
 .IP "--mail-from <address>"
 (SMTP) Specify a single address that the given mail should get sent from.
 
@@ -1253,6 +1261,12 @@ connection if the server doesn't support SSL/TLS. (Added in 7.20.0)
 
 This option was formerly known as \fI--ftp-ssl-reqd\fP (added in 7.15.5). That
 option name can still be used but will be removed in a future version.
+.IP "--ssl-allow-beast"
+(SSL) This option tells curl to not work around a security flaw in the SSL3
+and TLS1.0 protocols known as BEAST.  If this option isn't used, the SSL layer
+may use work-arounds known to cause interoperability problems with some older
+SSL implementations. WARNING: this option loosens the SSL security, and by
+using this flag you ask for exactly that.  (Added in 7.25.0)
 .IP "--socks4 <host[:port]>"
 Use the specified SOCKS4 proxy. If the port number is not specified, it is
 assumed at port 1080. (Added in 7.15.2)
@@ -1319,8 +1333,7 @@ implementation does not.  The option \fI--socks5-gssapi-nec\fP allows the
 unprotected exchange of the protection mode negotiation. (Added in 7.19.4).
 .IP "--stderr <file>"
 Redirect all writes to stderr to the specified file instead. If the file name
-is a plain '-', it is instead written to stdout. This option has no point when
-you're using a shell with decent redirecting capabilities.
+is a plain '-', it is instead written to stdout.
 
 If this option is used several times, the last one will be used.
 .IP "-t, --telnet-option <OPT=val>"
@@ -1472,6 +1485,11 @@ The variables available at this point are:
 The URL that was fetched last. This is most meaningful if you've told curl
 to follow location: headers.
 .TP
+.B filename_effective
+The ultimate filename that curl writes out to. This is only meaningful if curl
+is told to write to a file with the --remote-name or --output option. It's most
+useful in combination with the --remote-header-name option. (Added in 7.25.1)
+.TP
 .B http_code
 The numerical response code that was found in the last retrieved HTTP(S) or
 FTP(s) transfer. In 7.18.2 the alias \fBresponse_code\fP was added to show the
@@ -1556,7 +1574,7 @@ means the verification was successful. (Added in 7.19.0)
 .RE
 
 If this option is used several times, the last one will be used.
-.IP "-x, --proxy <[protocol://][user@password]proxyhost[:port]>"
+.IP "-x, --proxy <[protocol://][user:password@]proxyhost[:port]>"
 Use the specified HTTP proxy. If the port number is not specified, it is
 assumed at port 1080.
 
@@ -1569,6 +1587,10 @@ converted to HTTP. It means that certain protocol specific operations might
 not be available. This is not the case if you can tunnel through the proxy, as
 one with the \fI-p, --proxytunnel\fP option.
 
+User and password that might be provided in the proxy string are URL decoded
+by libcurl. This allows you to pass in special characters such as @ by using
+%40 or pass in a colon with %3a.
+
 The proxy host can be specified the exact same way as the proxy environment
 variables, including the protocol prefix (http://) and the embedded user +
 password.
@@ -1592,6 +1614,14 @@ Specifies a custom FTP command to use instead of LIST when doing file lists
 with FTP.
 
 If this option is used several times, the last one will be used.
+
+.IP "--xattr"
+When saving output to a file, this option tells curl to store certain file
+metadata in extened file attributes. Currently, the URL is stored in the
+xdg.origin.url attribute and, for HTTP, the content type is stored in
+the mime_type attribute. If the file system does not support extended
+attributes, a warning is issued.
+
 .IP "-y, --speed-time <time>"
 If a download is slower than speed-limit bytes per second during a speed-time
 period, the download gets aborted. If speed-time is used, the default
@@ -1607,12 +1637,12 @@ speed-time seconds it gets aborted. speed-time is set with -y and is 30 if
 not set.
 
 If this option is used several times, the last one will be used.
-.IP "-z, --time-cond <date expression>"
-(HTTP/FTP/FILE) Request a file that has been modified later than the given time
-and date, or one that has been modified before that time. The date expression
-can be all sorts of date strings or if it doesn't match any internal ones, it
-tries to get the time from a given file name instead! See the
-\fIcurl_getdate(3)\fP man pages for date expression details.
+.IP "-z/--time-cond <date expression>|<file>"
+(HTTP/FTP) Request a file that has been modified later than the given time and
+date, or one that has been modified before that time. The <date expression> can
+be all sorts of date strings or if it doesn't match any internal ones, it is
+taken as a filename and tries to get the modification date (mtime) from <file>
+instead. See the \fIcurl_getdate(3)\fP man pages for date expression details.
 
 Start the date expression with a dash (-) to make it request for a document
 that is older than the given date/time, default is a document that is newer

docs/examples/.gitignore

@@ -18,14 +18,18 @@ http-post
 httpcustomheader
 httpput
 https
+imap
 multi-app
 multi-debugcallback
 multi-double
 multi-post
 multi-single
 persistant
+pop3s
+pop3slist
 post-callback
 postit2
+progressfunc
 resolve
 rtsp
 sendrecv
@@ -36,3 +40,4 @@ simplesmtp
 simplessl
 smtp-multi
 smtp-tls
+url2file

docs/examples/Makefile.am

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -23,7 +23,7 @@
 AUTOMAKE_OPTIONS = foreign nostdinc
 
 EXTRA_DIST = README Makefile.example Makefile.inc Makefile.m32 \
-	makefile.dj $(COMPLICATED_EXAMPLES)
+	Makefile.netware makefile.dj $(COMPLICATED_EXAMPLES)
 
 # Specify our include paths here, and do it relative to $(top_srcdir) and
 # $(top_builddir), to ensure that these paths which belong to the library
@@ -40,12 +40,12 @@ INCLUDES = -I$(top_builddir)/include/curl \
 
 LIBDIR = $(top_builddir)/lib
 
-if STATICLIB
-# we need this define when building with a static lib on Windows
-STATICCPPFLAGS = -DCURL_STATICLIB
-endif
+AM_CPPFLAGS = -DCURL_NO_OLDIES
 
-CPPFLAGS = -DCURL_NO_OLDIES $(STATICCPPFLAGS)
+# Mostly for Windows build targets, when using static libcurl
+if USE_CPPFLAG_CURL_STATICLIB
+AM_CPPFLAGS += -DCURL_STATICLIB
+endif
 
 # Dependencies
 LDADD = $(LIBDIR)/libcurl.la

docs/examples/Makefile.inc

@@ -4,7 +4,8 @@ check_PROGRAMS = 10-at-a-time anyauthput cookie_interface debug fileupload \
   https multi-app multi-debugcallback multi-double multi-post multi-single \
   persistant post-callback postit2 sepheaders simple simplepost simplessl  \
   sendrecv httpcustomheader certinfo chkspeed ftpgetinfo ftp-wildcard \
-  smtp-multi simplesmtp smtp-tls rtsp externalsocket resolve
+  smtp-multi simplesmtp smtp-tls rtsp externalsocket resolve \
+  progressfunc pop3s pop3slist imap url2file
 
 # These examples require external dependencies that may not be commonly
 # available on POSIX systems, so don't bother attempting to compile them here.

docs/examples/Makefile.m32

@@ -19,31 +19,50 @@
 # KIND, either express or implied.
 #
 ###########################################################################
-#########################################################################
 #
-## Makefile for building curl examples with MingW32
-## and optionally OpenSSL (0.9.8), libssh2 (0.18), zlib (1.2.3)
+## Makefile for building curl examples with MingW (GCC-3.2 or later)
+## and optionally OpenSSL (0.9.8), libssh2 (1.3), zlib (1.2.5), librtmp (2.3)
 ##
-## Usage:
-## mingw32-make -f Makefile.m32 [SSL=1] [SSH2=1] [ZLIB=1] [SSPI=1] [IPV6=1] [DYN=1]
+## Usage:   mingw32-make -f Makefile.m32 CFG=-feature1[-feature2][-feature3][...]
+## Example: mingw32-make -f Makefile.m32 CFG=-zlib-ssl-spi-winidn
 ##
 ## Hint: you can also set environment vars to control the build, f.e.:
-## set ZLIB_PATH=c:/zlib-1.2.3
+## set ZLIB_PATH=c:/zlib-1.2.7
 ## set ZLIB=1
-##
-#########################################################################
+#
+###########################################################################
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../zlib-1.2.3
+ZLIB_PATH = ../../../zlib-1.2.7
 endif
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.8k
+OPENSSL_PATH = ../../../openssl-0.9.8x
+endif
+ifndef OPENSSL_LIBPATH
+OPENSSL_LIBPATH = $(OPENSSL_PATH)/out
+endif
+ifndef OPENSSL_LIBS
+OPENSSL_LIBS = -leay32 -lssl32
 endif
 # Edit the path below to point to the base of your LibSSH2 package.
 ifndef LIBSSH2_PATH
-LIBSSH2_PATH = ../../libssh2-1.2
+LIBSSH2_PATH = ../../../libssh2-1.4.2
+endif
+# Edit the path below to point to the base of your librtmp package.
+ifndef LIBRTMP_PATH
+LIBRTMP_PATH = ../../../librtmp-2.3
+endif
+# Edit the path below to point to the base of your libidn package.
+ifndef LIBIDN_PATH
+LIBIDN_PATH = ../../../libidn-1.18
+endif
+# Edit the path below to point to the base of your MS IDN package.
+# Microsoft Internationalized Domain Names (IDN) Mitigation APIs 1.1
+# http://www.microsoft.com/downloads/en/details.aspx?FamilyID=ad6158d7-ddba-416a-9109-07607425a815
+ifndef WINIDN_PATH
+WINIDN_PATH = ../../../Microsoft IDN Mitigation APIs
 endif
 # Edit the path below to point to the base of your Novell LDAP NDK.
 ifndef LDAP_SDK
@@ -51,25 +70,76 @@ LDAP_SDK = c:/novell/ndk/cldapsdk/win32
 endif
 
 PROOT = ../..
-ARES_LIB = $(PROOT)/ares
 
-SSL = 1
-ZLIB = 1
+# Edit the path below to point to the base of your c-ares package.
+ifndef LIBCARES_PATH
+LIBCARES_PATH = $(PROOT)/ares
+endif
+
+# Edit the var below to set to your architecture or set environment var.
+ifndef ARCH
+ARCH = w32
+endif
 
 CC = gcc
 CFLAGS = -g -O2 -Wall
+CFLAGS += -fno-strict-aliasing
+ifeq ($(ARCH),w64)
+CFLAGS += -D_AMD64_
+endif
 # comment LDFLAGS below to keep debug info
 LDFLAGS = -s
 RC = windres
 RCFLAGS = --include-dir=$(PROOT)/include -O COFF -i
-RM = del /q /f > NUL 2>&1
+
+RM = del /q /f 2>NUL
 CP = copy
 
 ########################################################
 ## Nothing more to do below this line!
 
+ifeq ($(findstring -dyn,$(CFG)),-dyn)
+DYN = 1
+endif
+ifeq ($(findstring -ares,$(CFG)),-ares)
+ARES = 1
+endif
+ifeq ($(findstring -rtmp,$(CFG)),-rtmp)
+RTMP = 1
+SSL = 1
+ZLIB = 1
+endif
+ifeq ($(findstring -ssh2,$(CFG)),-ssh2)
+SSH2 = 1
+SSL = 1
+ZLIB = 1
+endif
+ifeq ($(findstring -ssl,$(CFG)),-ssl)
+SSL = 1
+endif
+ifeq ($(findstring -zlib,$(CFG)),-zlib)
+ZLIB = 1
+endif
+ifeq ($(findstring -idn,$(CFG)),-idn)
+IDN = 1
+endif
+ifeq ($(findstring -winidn,$(CFG)),-winidn)
+WINIDN = 1
+endif
+ifeq ($(findstring -sspi,$(CFG)),-sspi)
+SSPI = 1
+endif
+ifeq ($(findstring -spnego,$(CFG)),-spnego)
+SPNEGO = 1
+endif
+ifeq ($(findstring -ldaps,$(CFG)),-ldaps)
+LDAPS = 1
+endif
+ifeq ($(findstring -ipv6,$(CFG)),-ipv6)
+IPV6 = 1
+endif
+
 INCLUDES = -I. -I$(PROOT) -I$(PROOT)/include -I$(PROOT)/lib
-LINK = $(CC) $(LDFLAGS) -o $@
 
 ifdef DYN
   curl_DEPENDENCIES = $(PROOT)/lib/libcurldll.a $(PROOT)/lib/libcurl.dll
@@ -81,34 +151,45 @@ else
 endif
 ifdef ARES
   ifndef DYN
-    curl_DEPENDENCIES += $(ARES_LIB)/libcares.a
+    curl_DEPENDENCIES += $(LIBCARES_PATH)/libcares.a
   endif
   CFLAGS += -DUSE_ARES
-  curl_LDADD += -L$(ARES_LIB) -lcares
+  curl_LDADD += -L"$(LIBCARES_PATH)" -lcares
+endif
+ifdef RTMP
+  CFLAGS += -DUSE_LIBRTMP
+  curl_LDADD += -L"$(LIBRTMP_PATH)/librtmp" -lrtmp -lwinmm
 endif
 ifdef SSH2
   CFLAGS += -DUSE_LIBSSH2 -DHAVE_LIBSSH2_H
-  curl_LDADD += -L$(LIBSSH2_PATH)/win32 -lssh2
+  curl_LDADD += -L"$(LIBSSH2_PATH)/win32" -lssh2
 endif
 ifdef SSL
-  INCLUDES += -I"$(OPENSSL_PATH)/outinc"
   CFLAGS += -DUSE_SSLEAY -DHAVE_OPENSSL_ENGINE_H
-  ifdef DYN
-    curl_LDADD += -L$(OPENSSL_PATH)/out -leay32 -lssl32
-  else
-    curl_LDADD += -L$(OPENSSL_PATH)/out -lssl -lcrypto -lgdi32
-  endif
+  curl_LDADD += -L"$(OPENSSL_LIBPATH)" $(OPENSSL_LIBS)
 endif
 ifdef ZLIB
   INCLUDES += -I"$(ZLIB_PATH)"
   CFLAGS += -DHAVE_LIBZ -DHAVE_ZLIB_H
-  curl_LDADD += -L$(ZLIB_PATH) -lz
+  curl_LDADD += -L"$(ZLIB_PATH)" -lz
+endif
+ifdef IDN
+  CFLAGS += -DUSE_LIBIDN
+  curl_LDADD += -L"$(LIBIDN_PATH)/lib" -lidn
+else
+ifdef WINIDN
+  CFLAGS += -DUSE_WIN32_IDN
+  curl_LDADD += -L"$(WINIDN_PATH)" -lnormaliz
+endif
 endif
 ifdef SSPI
   CFLAGS += -DUSE_WINDOWS_SSPI
 endif
+ifdef SPNEGO
+  CFLAGS += -DHAVE_SPNEGO
+endif
 ifdef IPV6
-  CFLAGS += -DENABLE_IPV6
+  CFLAGS += -DENABLE_IPV6 -D_WIN32_WINNT=0x0501
 endif
 ifdef LDAPS
   CFLAGS += -DHAVE_LDAP_SSL
@@ -123,32 +204,32 @@ ifdef USE_LDAP_OPENLDAP
 endif
 ifndef USE_LDAP_NOVELL
 ifndef USE_LDAP_OPENLDAP
-curl_LDADD += -lwldap32
+  curl_LDADD += -lwldap32
 endif
 endif
 curl_LDADD += -lws2_32
-COMPILE = $(CC) $(INCLUDES) $(CFLAGS)
 
 # Makefile.inc provides the check_PROGRAMS and COMPLICATED_EXAMPLES defines
 include Makefile.inc
 
-example_PROGRAMS := $(patsubst %,%.exe,$(strip $(check_PROGRAMS)))
-
-.SUFFIXES: .rc .res .o .exe
+check_PROGRAMS := $(patsubst %,%.exe,$(strip $(check_PROGRAMS)))
+check_PROGRAMS += ftpuploadresume.exe synctime.exe
 
 
-all: $(example_PROGRAMS)
+all: $(check_PROGRAMS)
 
-.o.exe: $(curl_DEPENDENCIES)
-	$(LINK) $< $(curl_LDADD)
+%.exe: %.o $(curl_DEPENDENCIES)
+	$(CC) $(LDFLAGS) -o $@ $< $(curl_LDADD)
 
-.c.o:
-	$(COMPILE) -c $<
+%.o: %.c
+	$(CC) $(INCLUDES) $(CFLAGS) -c $<
 
-.rc.res:
+%.res: %.rc
 	$(RC) $(RCFLAGS) $< -o $@
 
 clean:
-	$(RM) $(example_PROGRAMS)
+	-$(RM) $(check_PROGRAMS:.exe=.o)
 
+distclean vclean: clean
+	-$(RM) $(check_PROGRAMS)
 

docs/examples/Makefile.netware

@@ -0,0 +1,441 @@
+#################################################################
+#
+## Makefile for building curl.nlm (NetWare version - gnu make)
+## Use: make -f Makefile.netware
+##
+## Comments to: Guenter Knauf http://www.gknw.net/phpbb
+#
+#################################################################
+
+# Edit the path below to point to the base of your Novell NDK.
+ifndef NDKBASE
+NDKBASE	= c:/novell
+endif
+
+# Edit the path below to point to the base of your Zlib sources.
+ifndef ZLIB_PATH
+ZLIB_PATH = ../../../zlib-1.2.7
+endif
+
+# Edit the path below to point to the base of your OpenSSL package.
+ifndef OPENSSL_PATH
+OPENSSL_PATH = ../../../openssl-0.9.8x
+endif
+
+# Edit the path below to point to the base of your LibSSH2 package.
+ifndef LIBSSH2_PATH
+LIBSSH2_PATH = ../../../libssh2-1.4.2
+endif
+
+# Edit the path below to point to the base of your axTLS package.
+ifndef AXTLS_PATH
+AXTLS_PATH = ../../../axTLS-1.2.7
+endif
+
+# Edit the path below to point to the base of your libidn package.
+ifndef LIBIDN_PATH
+LIBIDN_PATH = ../../../libidn-1.18
+endif
+
+# Edit the path below to point to the base of your librtmp package.
+ifndef LIBRTMP_PATH
+LIBRTMP_PATH = ../../../librtmp-2.3
+endif
+
+# Edit the path below to point to the base of your fbopenssl package.
+ifndef FBOPENSSL_PATH
+FBOPENSSL_PATH = ../../fbopenssl-0.4
+endif
+
+# Edit the path below to point to the base of your c-ares package.
+ifndef LIBCARES_PATH
+LIBCARES_PATH = ../../ares
+endif
+
+ifndef INSTDIR
+INSTDIR	= ..$(DS)..$(DS)curl-$(LIBCURL_VERSION_STR)-bin-nw
+endif
+
+# Edit the vars below to change NLM target settings.
+TARGET  = examples
+VERSION	= $(LIBCURL_VERSION)
+COPYR	= Copyright (C) $(LIBCURL_COPYRIGHT_STR)
+DESCR	= cURL ($(LIBARCH))
+MTSAFE	= YES
+STACK	= 8192
+SCREEN	= Example Program
+# Comment the line below if you dont want to load protected automatically.
+# LDRING = 3
+
+# Uncomment the next line to enable linking with POSIX semantics.
+# POSIXFL = 1
+
+# Edit the var below to point to your lib architecture.
+ifndef LIBARCH
+LIBARCH = LIBC
+endif
+
+# must be equal to NDEBUG or DEBUG, CURLDEBUG
+ifndef DB
+DB	= NDEBUG
+endif
+# Optimization: -O<n> or debugging: -g
+ifeq ($(DB),NDEBUG)
+	OPT	= -O2
+	OBJDIR	= release
+else
+	OPT	= -g
+	OBJDIR	= debug
+endif
+
+# The following lines defines your compiler.
+ifdef CWFolder
+	METROWERKS = $(CWFolder)
+endif
+ifdef METROWERKS
+	# MWCW_PATH = $(subst \,/,$(METROWERKS))/Novell Support
+	MWCW_PATH = $(subst \,/,$(METROWERKS))/Novell Support/Metrowerks Support
+	CC = mwccnlm
+else
+	CC = gcc
+endif
+PERL	= perl
+# Here you can find a native Win32 binary of the original awk:
+# http://www.gknw.net/development/prgtools/awk-20100523.zip
+AWK	= awk
+CP	= cp -afv
+MKDIR	= mkdir
+# RM	= rm -f
+# If you want to mark the target as MTSAFE you will need a tool for
+# generating the xdc data for the linker; here's a minimal tool:
+# http://www.gknw.net/development/prgtools/mkxdc.zip
+MPKXDC	= mkxdc
+
+# LIBARCH_U = $(shell $(AWK) 'BEGIN {print toupper(ARGV[1])}' $(LIBARCH))
+LIBARCH_L = $(shell $(AWK) 'BEGIN {print tolower(ARGV[1])}' $(LIBARCH))
+
+# Include the version info retrieved from curlver.h
+-include $(OBJDIR)/version.inc
+
+# Global flags for all compilers
+CFLAGS	+= $(OPT) -D$(DB) -DNETWARE -DHAVE_CONFIG_H -nostdinc
+
+ifeq ($(CC),mwccnlm)
+LD	= mwldnlm
+LDFLAGS	= -nostdlib $< $(PRELUDE) $(LDLIBS) -o $@ -commandfile
+LIBEXT	= lib
+CFLAGS	+= -gccinc -inline off -opt nointrinsics -proc 586
+CFLAGS	+= -relax_pointers
+#CFLAGS	+= -w on
+ifeq ($(LIBARCH),LIBC)
+ifeq ($(POSIXFL),1)
+	PRELUDE = $(NDK_LIBC)/imports/posixpre.o
+else
+	PRELUDE = $(NDK_LIBC)/imports/libcpre.o
+endif
+	CFLAGS += -align 4
+else
+	# PRELUDE = $(NDK_CLIB)/imports/clibpre.o
+	# to avoid the __init_* / __deinit_* whoes dont use prelude from NDK
+	PRELUDE = "$(MWCW_PATH)/libraries/runtime/prelude.obj"
+	# CFLAGS += -include "$(MWCW_PATH)/headers/nlm_clib_prefix.h"
+	CFLAGS += -align 1
+endif
+else
+LD	= nlmconv
+LDFLAGS	= -T
+LIBEXT	= a
+CFLAGS	+= -m32
+CFLAGS  += -fno-builtin -fno-strict-aliasing
+ifeq ($(findstring gcc,$(CC)),gcc)
+CFLAGS  += -fpcc-struct-return
+endif
+CFLAGS	+= -Wall # -pedantic
+ifeq ($(LIBARCH),LIBC)
+ifeq ($(POSIXFL),1)
+	PRELUDE = $(NDK_LIBC)/imports/posixpre.gcc.o
+else
+	PRELUDE = $(NDK_LIBC)/imports/libcpre.gcc.o
+endif
+else
+	# PRELUDE = $(NDK_CLIB)/imports/clibpre.gcc.o
+	# to avoid the __init_* / __deinit_* whoes dont use prelude from NDK
+	# http://www.gknw.net/development/mk_nlm/gcc_pre.zip
+	PRELUDE = $(NDK_ROOT)/pre/prelude.o
+	CFLAGS += -include $(NDKBASE)/nlmconv/genlm.h
+endif
+endif
+
+NDK_ROOT = $(NDKBASE)/ndk
+ifndef NDK_CLIB
+NDK_CLIB = $(NDK_ROOT)/nwsdk
+endif
+ifndef NDK_LIBC
+NDK_LIBC = $(NDK_ROOT)/libc
+endif
+ifndef NDK_LDAP
+NDK_LDAP = $(NDK_ROOT)/cldapsdk/netware
+endif
+CURL_INC = ../../include
+CURL_LIB = ../../lib
+
+INCLUDES = -I$(CURL_INC)
+
+ifeq ($(findstring -static,$(CFG)),-static)
+LINK_STATIC = 1
+endif
+ifeq ($(findstring -ares,$(CFG)),-ares)
+WITH_ARES = 1
+endif
+ifeq ($(findstring -rtmp,$(CFG)),-rtmp)
+WITH_RTMP = 1
+WITH_SSL = 1
+WITH_ZLIB = 1
+endif
+ifeq ($(findstring -ssh2,$(CFG)),-ssh2)
+WITH_SSH2 = 1
+WITH_SSL = 1
+WITH_ZLIB = 1
+endif
+ifeq ($(findstring -axtls,$(CFG)),-axtls)
+WITH_AXTLS = 1
+WITH_SSL =
+else
+ifeq ($(findstring -ssl,$(CFG)),-ssl)
+WITH_SSL = 1
+endif
+endif
+ifeq ($(findstring -zlib,$(CFG)),-zlib)
+WITH_ZLIB = 1
+endif
+ifeq ($(findstring -idn,$(CFG)),-idn)
+WITH_IDN = 1
+endif
+ifeq ($(findstring -spnego,$(CFG)),-spnego)
+WITH_SPNEGO = 1
+endif
+ifeq ($(findstring -ipv6,$(CFG)),-ipv6)
+ENABLE_IPV6 = 1
+endif
+
+ifdef LINK_STATIC
+	LDLIBS	= $(CURL_LIB)/libcurl.$(LIBEXT)
+ifdef WITH_ARES
+	LDLIBS += $(LIBCARES_PATH)/libcares.$(LIBEXT)
+endif
+else
+	MODULES	= libcurl.nlm
+	IMPORTS	= @$(CURL_LIB)/libcurl.imp
+endif
+ifdef WITH_SSH2
+	# INCLUDES += -I$(LIBSSH2_PATH)/include
+ifdef LINK_STATIC
+	LDLIBS += $(LIBSSH2_PATH)/nw/libssh2.$(LIBEXT)
+else
+	MODULES += libssh2.nlm
+	IMPORTS += @$(LIBSSH2_PATH)/nw/libssh2.imp
+endif
+endif
+ifdef WITH_RTMP
+	# INCLUDES += -I$(LIBRTMP_PATH)
+ifdef LINK_STATIC
+	LDLIBS += $(LIBRTMP_PATH)/librtmp/librtmp.$(LIBEXT)
+endif
+endif
+ifdef WITH_SSL
+	INCLUDES += -I$(OPENSSL_PATH)/outinc_nw_$(LIBARCH_L)
+	LDLIBS += $(OPENSSL_PATH)/out_nw_$(LIBARCH_L)/ssl.$(LIBEXT)
+	LDLIBS += $(OPENSSL_PATH)/out_nw_$(LIBARCH_L)/crypto.$(LIBEXT)
+	IMPORTS += GetProcessSwitchCount RunningProcess
+ifdef WITH_SPNEGO
+	# INCLUDES += -I$(FBOPENSSL_PATH)/include
+	LDLIBS += $(FBOPENSSL_PATH)/nw/fbopenssl.$(LIBEXT)
+endif
+else
+ifdef WITH_AXTLS
+	INCLUDES += -I$(AXTLS_PATH)/inc
+ifdef LINK_STATIC
+	LDLIBS += $(AXTLS_PATH)/lib/libaxtls.$(LIBEXT)
+else
+	MODULES += libaxtls.nlm
+	IMPORTS += $(AXTLS_PATH)/lib/libaxtls.imp
+endif
+endif
+endif
+ifdef WITH_ZLIB
+	# INCLUDES += -I$(ZLIB_PATH)
+ifdef LINK_STATIC
+	LDLIBS += $(ZLIB_PATH)/nw/$(LIBARCH)/libz.$(LIBEXT)
+else
+	MODULES += libz.nlm
+	IMPORTS += @$(ZLIB_PATH)/nw/$(LIBARCH)/libz.imp
+endif
+endif
+ifdef WITH_IDN
+	# INCLUDES += -I$(LIBIDN_PATH)/include
+	LDLIBS += $(LIBIDN_PATH)/lib/libidn.$(LIBEXT)
+endif
+
+ifeq ($(LIBARCH),LIBC)
+	INCLUDES += -I$(NDK_LIBC)/include
+	# INCLUDES += -I$(NDK_LIBC)/include/nks
+	# INCLUDES += -I$(NDK_LIBC)/include/winsock
+	CFLAGS += -D_POSIX_SOURCE
+else
+	INCLUDES += -I$(NDK_CLIB)/include/nlm
+	# INCLUDES += -I$(NDK_CLIB)/include
+endif
+ifndef DISABLE_LDAP
+	# INCLUDES += -I$(NDK_LDAP)/$(LIBARCH_L)/inc
+endif
+CFLAGS	+= $(INCLUDES)
+
+ifeq ($(MTSAFE),YES)
+	XDCOPT = -n
+endif
+ifeq ($(MTSAFE),NO)
+	XDCOPT = -u
+endif
+ifdef XDCOPT
+	XDCDATA = $(OBJDIR)/$(TARGET).xdc
+endif
+
+ifeq ($(findstring /sh,$(SHELL)),/sh)
+DL	= '
+DS	= /
+PCT	= %
+#-include $(NDKBASE)/nlmconv/ncpfs.inc
+else
+DS	= \\
+PCT	= %%
+endif
+
+# Makefile.inc provides the CSOURCES and HHEADERS defines
+include Makefile.inc
+
+check_PROGRAMS := $(patsubst %,%.nlm,$(strip $(check_PROGRAMS)))
+
+.PRECIOUS: $(OBJDIR)/%.o $(OBJDIR)/%.def $(OBJDIR)/%.xdc
+
+
+all: prebuild $(check_PROGRAMS)
+
+prebuild: $(OBJDIR) $(OBJDIR)/version.inc
+
+$(OBJDIR)/%.o: %.c
+	@echo Compiling $<
+	$(CC) $(CFLAGS) -c $< -o $@
+
+$(OBJDIR)/version.inc: $(CURL_INC)/curl/curlver.h $(OBJDIR)
+	@echo Creating $@
+	@$(AWK) -f ../../packages/NetWare/get_ver.awk $< > $@
+
+install: $(INSTDIR) all
+	@$(CP) $(check_PROGRAMS) $(INSTDIR)
+
+clean:
+	-$(RM) -r $(OBJDIR)
+
+distclean vclean: clean
+	-$(RM) $(check_PROGRAMS)
+
+$(OBJDIR) $(INSTDIR):
+	@$(MKDIR) $@
+
+%.nlm: $(OBJDIR)/%.o $(OBJDIR)/%.def $(XDCDATA)
+	@echo Linking $@
+	@-$(RM) $@
+	@$(LD) $(LDFLAGS) $(OBJDIR)/$(@:.nlm=.def)
+
+$(OBJDIR)/%.xdc: Makefile.netware
+	@echo Creating $@
+	@$(MPKXDC) $(XDCOPT) $@
+
+$(OBJDIR)/%.def: Makefile.netware
+	@echo $(DL)# DEF file for linking with $(LD)$(DL) > $@
+	@echo $(DL)# Do not edit this file - it is created by Make!$(DL) >> $@
+	@echo $(DL)# All your changes will be lost!!$(DL) >> $@
+	@echo $(DL)#$(DL) >> $@
+	@echo $(DL)copyright "$(COPYR)"$(DL) >> $@
+	@echo $(DL)description "$(DESCR) $(notdir $(@:.def=)) Example"$(DL) >> $@
+	@echo $(DL)version $(VERSION)$(DL) >> $@
+ifdef NLMTYPE
+	@echo $(DL)type $(NLMTYPE)$(DL) >> $@
+endif
+ifdef STACK
+	@echo $(DL)stack $(STACK)$(DL) >> $@
+endif
+ifdef SCREEN
+	@echo $(DL)screenname "$(DESCR) $(notdir $(@:.def=)) $(SCREEN)"$(DL) >> $@
+else
+	@echo $(DL)screenname "DEFAULT"$(DL) >> $@
+endif
+ifneq ($(DB),NDEBUG)
+	@echo $(DL)debug$(DL) >> $@
+endif
+	@echo $(DL)threadname "_$(notdir $(@:.def=))"$(DL) >> $@
+ifdef XDCDATA
+	@echo $(DL)xdcdata $(XDCDATA)$(DL) >> $@
+endif
+ifeq ($(LDRING),0)
+	@echo $(DL)flag_on 16$(DL) >> $@
+endif
+ifeq ($(LDRING),3)
+	@echo $(DL)flag_on 512$(DL) >> $@
+endif
+ifeq ($(LIBARCH),CLIB)
+	@echo $(DL)start _Prelude$(DL) >> $@
+	@echo $(DL)exit _Stop$(DL) >> $@
+	@echo $(DL)import @$(NDK_CLIB)/imports/clib.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_CLIB)/imports/threads.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_CLIB)/imports/nlmlib.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_CLIB)/imports/socklib.imp$(DL) >> $@
+	@echo $(DL)module clib$(DL) >> $@
+ifndef DISABLE_LDAP
+	@echo $(DL)import @$(NDK_LDAP)/clib/imports/ldapsdk.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_LDAP)/clib/imports/ldapssl.imp$(DL) >> $@
+#	@echo $(DL)import @$(NDK_LDAP)/clib/imports/ldapx.imp$(DL) >> $@
+	@echo $(DL)module ldapsdk ldapssl$(DL) >> $@
+endif
+else
+ifeq ($(POSIXFL),1)
+	@echo $(DL)flag_on 4194304$(DL) >> $@
+endif
+	@echo $(DL)flag_on 64$(DL) >> $@
+	@echo $(DL)pseudopreemption$(DL) >> $@
+ifeq ($(findstring posixpre,$(PRELUDE)),posixpre)
+	@echo $(DL)start POSIX_Start$(DL) >> $@
+	@echo $(DL)exit POSIX_Stop$(DL) >> $@
+	@echo $(DL)check POSIX_CheckUnload$(DL) >> $@
+else
+	@echo $(DL)start _LibCPrelude$(DL) >> $@
+	@echo $(DL)exit _LibCPostlude$(DL) >> $@
+	@echo $(DL)check _LibCCheckUnload$(DL) >> $@
+endif
+	@echo $(DL)import @$(NDK_LIBC)/imports/libc.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_LIBC)/imports/netware.imp$(DL) >> $@
+	@echo $(DL)module libc$(DL) >> $@
+ifndef DISABLE_LDAP
+	@echo $(DL)import @$(NDK_LDAP)/libc/imports/lldapsdk.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_LDAP)/libc/imports/lldapssl.imp$(DL) >> $@
+#	@echo $(DL)import @$(NDK_LDAP)/libc/imports/lldapx.imp$(DL) >> $@
+	@echo $(DL)module lldapsdk lldapssl$(DL) >> $@
+endif
+endif
+ifdef MODULES
+	@echo $(DL)module $(MODULES)$(DL) >> $@
+endif
+ifdef EXPORTS
+	@echo $(DL)export $(EXPORTS)$(DL) >> $@
+endif
+ifdef IMPORTS
+	@echo $(DL)import $(IMPORTS)$(DL) >> $@
+endif
+ifeq ($(findstring nlmconv,$(LD)),nlmconv)
+	@echo $(DL)input $(PRELUDE)$(DL) >> $@
+	@echo $(DL)input $(@:.def=.o)$(DL) >> $@
+ifdef LDLIBS
+	@echo $(DL)input $(LDLIBS)$(DL) >> $@
+endif
+	@echo $(DL)output $(notdir $(@:.def=.nlm))$(DL) >> $@
+endif

docs/examples/README

@@ -55,6 +55,7 @@ htmltitle.cc   - download a HTML file and extract the <title> tag from a HTML
 http-post.c    - HTTP POST
 httpput.c      - HTTP PUT a local file
 https.c        - simple HTTPS transfer
+imap.c         - simple IMAP transfer
 multi-app.c    - a multi-interface app
 multi-debugcallback.c - a multi-interface app using the debug callback
 multi-double.c - a multi-interface app doing two simultaneous transfers
@@ -63,6 +64,8 @@ multi-single.c - a multi-interface app getting a single file
 multithread.c  - an example using multi-treading transferring multiple files
 opensslthreadlock.c - show how to do locking when using OpenSSL multi-threaded
 persistant.c   - request two URLs with a persistent connection
+pop3s.c        - POP3S transfer
+pop3slist.c    - POP3S LIST
 post-callback.c - send a HTTP POST using a callback
 postit2.c      - send a HTTP multipart formpost
 sampleconv.c   - showing how a program on a non-ASCII platform would invoke
@@ -73,4 +76,5 @@ simple.c       - the most simple download a URL source
 simplepost.c   - HTTP POST
 simplessl.c    - HTTPS example with certificates many options set
 synctime.c     - Sync local time by extracting date from remote HTTP servers
+url2file.c     - download a document and store it in a file
 10-at-a-time.c - Download many files simultaneously, 10 at a time.

docs/examples/anyauthput.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -27,6 +27,7 @@
 #  ifdef __VMS
      typedef int intptr_t;
 #  endif
+#  include <stdint.h>
 #  include <unistd.h>
 #endif
 #include <sys/types.h>
@@ -87,12 +88,16 @@ static curlioerr my_ioctl(CURL *handle, curliocmd cmd, void *userp)
 static size_t read_callback(void *ptr, size_t size, size_t nmemb, void *stream)
 {
   size_t retcode;
+  curl_off_t nread;
 
   intptr_t fd = (intptr_t)stream;
 
   retcode = read(fd, ptr, size * nmemb);
 
-  fprintf(stderr, "*** We read %d bytes from file\n", retcode);
+  nread = (curl_off_t)retcode;
+
+  fprintf(stderr, "*** We read %" CURL_FORMAT_CURL_OFF_T
+          " bytes from file\n", nread);
 
   return retcode;
 }

docs/examples/curlx.c

@@ -239,8 +239,7 @@ static CURLcode sslctxfun(CURL * curl, void * sslctx, void * parm) {
   SSL_CTX_set_cipher_list(ctx,"RC4-MD5");
   SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
 
-  X509_STORE_add_cert(ctx->cert_store,sk_X509_value(p->ca,
-                                                    sk_X509_num(p->ca)-1));
+  X509_STORE_add_cert(SSL_CTX_get_cert_store(ctx), sk_X509_value(p->ca, sk_X509_num(p->ca)-1));
 
   SSL_CTX_set_verify_depth(ctx,2);
 

docs/examples/externalsocket.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -28,13 +28,18 @@
 #include <stdlib.h>
 #include <curl/curl.h>
 
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#include <sys/socket.h>       /*  socket definitions        */
+#ifdef WIN32
+#include <windows.h>
+#include <winsock2.h>
+#include <ws2tcpip.h>
+#define close closesocket
+#else
 #include <sys/types.h>        /*  socket types              */
+#include <sys/socket.h>       /*  socket definitions        */
+#include <netinet/in.h>
 #include <arpa/inet.h>        /*  inet (3) funtions         */
 #include <unistd.h>           /*  misc. UNIX functions      */
+#endif
 
 #include <errno.h>
 
@@ -52,7 +57,10 @@ static curl_socket_t opensocket(void *clientp,
                                 curlsocktype purpose,
                                 struct curl_sockaddr *address)
 {
-  curl_socket_t sockfd = *(curl_socket_t *)clientp;
+  curl_socket_t sockfd;
+  (void)purpose;
+  (void)address;
+  sockfd = *(curl_socket_t *)clientp;
   /* the actual externally set socket is passed in via the OPENSOCKETDATA
      option */
   return sockfd;
@@ -61,6 +69,9 @@ static curl_socket_t opensocket(void *clientp,
 static int sockopt_callback(void *clientp, curl_socket_t curlfd,
                             curlsocktype purpose)
 {
+  (void)clientp;
+  (void)curlfd;
+  (void)purpose;
   /* This return code was added in libcurl 7.21.5 */
   return CURL_SOCKOPT_ALREADY_CONNECTED;
 }
@@ -72,6 +83,16 @@ int main(void)
   struct sockaddr_in servaddr;  /*  socket address structure  */
   curl_socket_t sockfd;
 
+#ifdef WIN32
+  WSADATA wsaData;
+  int initwsa;
+
+  if((initwsa = WSAStartup(MAKEWORD(2,0), &wsaData)) != 0) {
+    printf("WSAStartup failed: %d\n", initwsa);
+    return 1;
+  }
+#endif
+
   curl = curl_easy_init();
   if(curl) {
     /*
@@ -81,16 +102,16 @@ int main(void)
     curl_easy_setopt(curl, CURLOPT_URL, "http://99.99.99.99:9999");
 
     /* Create the socket "manually" */
-    if ( (sockfd = socket(AF_INET, SOCK_STREAM, 0)) < 0 ) {
-      fprintf(stderr, "ECHOCLNT: Error creating listening socket.\n");
+    if( (sockfd = socket(AF_INET, SOCK_STREAM, 0)) == CURL_SOCKET_BAD ) {
+      printf("Error creating listening socket.\n");
       return 3;
     }
 
     memset(&servaddr, 0, sizeof(servaddr));
-    servaddr.sin_family      = AF_INET;
-    servaddr.sin_port        = htons(PORTNUM);
+    servaddr.sin_family = AF_INET;
+    servaddr.sin_port   = htons(PORTNUM);
 
-    if(inet_aton(IPADDR, &servaddr.sin_addr) <= 0 )
+    if (INADDR_NONE == (servaddr.sin_addr.s_addr = inet_addr(IPADDR)))
       return 2;
 
     if(connect(sockfd,(struct sockaddr *) &servaddr, sizeof(servaddr)) ==

docs/examples/ftp-wildcard.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -33,7 +33,7 @@ static long file_is_comming(struct curl_fileinfo *finfo,
 static long file_is_downloaded(struct callback_data *data);
 
 static size_t write_it(char *buff, size_t size, size_t nmemb,
-                       struct callback_data *data);
+                       void *cb_data);
 
 int main(int argc, char **argv)
 {
@@ -135,8 +135,9 @@ static long file_is_downloaded(struct callback_data *data)
 }
 
 static size_t write_it(char *buff, size_t size, size_t nmemb,
-                       struct callback_data *data)
+                       void *cb_data)
 {
+  struct callback_data *data = cb_data;
   size_t written = 0;
   if(data->output)
     written = fwrite(buff, size, nmemb, data->output);

docs/examples/ftpupload.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -51,12 +51,16 @@
    variable's memory when passed in to it from an app like this. */
 static size_t read_callback(void *ptr, size_t size, size_t nmemb, void *stream)
 {
+  curl_off_t nread;
   /* in real-world cases, this would probably get this data differently
      as this fread() stuff is exactly what the library already would do
      by default internally */
   size_t retcode = fread(ptr, size, nmemb, stream);
 
-  fprintf(stderr, "*** We read %d bytes from file\n", retcode);
+  nread = (curl_off_t)retcode;
+
+  fprintf(stderr, "*** We read %" CURL_FORMAT_CURL_OFF_T
+          " bytes from file\n", nread);
   return retcode;
 }
 

docs/examples/ftpuploadresume.c

@@ -39,7 +39,7 @@
 
 /* The MinGW headers are missing a few Win32 function definitions,
    you shouldn't need this if you use VC++ */
-#ifdef __MINGW32__
+#if defined(__MINGW32__) && !defined(__MINGW64__)
 int __cdecl _snscanf(const char * input, size_t length, const char * format, ...);
 #endif
 

docs/examples/httpput.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -39,13 +39,17 @@
 static size_t read_callback(void *ptr, size_t size, size_t nmemb, void *stream)
 {
   size_t retcode;
+  curl_off_t nread;
 
   /* in real-world cases, this would probably get this data differently
      as this fread() stuff is exactly what the library already would do
      by default internally */
   retcode = fread(ptr, size, nmemb, stream);
 
-  fprintf(stderr, "*** We read %d bytes from file\n", retcode);
+  nread = (curl_off_t)retcode;
+
+  fprintf(stderr, "*** We read %" CURL_FORMAT_CURL_OFF_T
+          " bytes from file\n", nread);
 
   return retcode;
 }

docs/examples/imap.c

@@ -0,0 +1,44 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+#include <stdio.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res = CURLE_OK;
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* Set username and password */
+    curl_easy_setopt(curl, CURLOPT_USERPWD, "user:password");
+
+    /* This will fetch the mailbox named "foobar" */
+    curl_easy_setopt(curl, CURLOPT_URL, "imap://imap.example.com/foobar");
+
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return (int)res;
+}

docs/examples/pop3s.c

@@ -0,0 +1,68 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+#include <stdio.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* Set username and password */
+    curl_easy_setopt(curl, CURLOPT_USERPWD, "user:password");
+
+    /* This will only fetch the message with ID "1" of the given mailbox */
+    curl_easy_setopt(curl, CURLOPT_URL, "pop3s://user@pop.example.com/1");
+
+#ifdef SKIP_PEER_VERIFICATION
+    /*
+     * If you want to connect to a site who isn't using a certificate that is
+     * signed by one of the certs in the CA bundle you have, you can skip the
+     * verification of the server's certificate. This makes the connection
+     * A LOT LESS SECURE.
+     *
+     * If you have a CA cert for the server stored someplace else than in the
+     * default bundle, then the CURLOPT_CAPATH option might come handy for
+     * you.
+     */
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L);
+#endif
+
+#ifdef SKIP_HOSTNAME_VERFICATION
+    /*
+     * If the site you're connecting to uses a different host name that what
+     * they have mentioned in their server certificate's commonName (or
+     * subjectAltName) fields, libcurl will refuse to connect. You can skip
+     * this check, but this will make the connection less secure.
+     */
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
+#endif
+
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/examples/pop3slist.c

@@ -0,0 +1,68 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+#include <stdio.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* Set username and password */
+    curl_easy_setopt(curl, CURLOPT_USERPWD, "user:password");
+
+    /* This will list every message of the given mailbox */
+    curl_easy_setopt(curl, CURLOPT_URL, "pop3s://user@pop.example.com/");
+
+#ifdef SKIP_PEER_VERIFICATION
+    /*
+     * If you want to connect to a site who isn't using a certificate that is
+     * signed by one of the certs in the CA bundle you have, you can skip the
+     * verification of the server's certificate. This makes the connection
+     * A LOT LESS SECURE.
+     *
+     * If you have a CA cert for the server stored someplace else than in the
+     * default bundle, then the CURLOPT_CAPATH option might come handy for
+     * you.
+     */
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L);
+#endif
+
+#ifdef SKIP_HOSTNAME_VERFICATION
+    /*
+     * If the site you're connecting to uses a different host name that what
+     * they have mentioned in their server certificate's commonName (or
+     * subjectAltName) fields, libcurl will refuse to connect. You can skip
+     * this check, but this will make the connection less secure.
+     */
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
+#endif
+
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/examples/post-callback.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -30,7 +30,7 @@ const char data[]="this is what we post to the silly web server";
 
 struct WriteThis {
   const char *readptr;
-  int sizeleft;
+  long sizeleft;
 };
 
 static size_t read_callback(void *ptr, size_t size, size_t nmemb, void *userp)
@@ -96,7 +96,7 @@ int main(void)
 #else
     /* Set the expected POST size. If you want to POST large amounts of data,
        consider CURLOPT_POSTFIELDSIZE_LARGE */
-    curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, (curl_off_t)pooh.sizeleft);
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, pooh.sizeleft);
 #endif
 
 #ifdef DISABLE_EXPECT

docs/examples/progressfunc.c

@@ -0,0 +1,84 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+#include <stdio.h>
+#include <curl/curl.h>
+
+#define STOP_DOWNLOAD_AFTER_THIS_MANY_BYTES         6000
+#define MINIMAL_PROGRESS_FUNCTIONALITY_INTERVAL     3
+
+struct myprogress {
+  double lastruntime;
+  CURL *curl;
+};
+
+static int progress(void *p,
+                    double dltotal, double dlnow,
+                    double ultotal, double ulnow)
+{
+  struct myprogress *myp = (struct myprogress *)p;
+  CURL *curl = myp->curl;
+  double curtime = 0;
+
+  curl_easy_getinfo(curl, CURLINFO_TOTAL_TIME, &curtime);
+
+  /* under certain circumstances it may be desirable for certain functionality
+     to only run every N seconds, in order to do this the transaction time can
+     be used */
+  if((curtime - myp->lastruntime) >= MINIMAL_PROGRESS_FUNCTIONALITY_INTERVAL) {
+    myp->lastruntime = curtime;
+    fprintf(stderr, "TOTAL TIME: %f \r\n", curtime);
+  }
+
+  fprintf(stderr, "UP: %g of %g  DOWN: %g of %g\r\n",
+          ulnow, ultotal, dlnow, dltotal);
+
+  if(dlnow > STOP_DOWNLOAD_AFTER_THIS_MANY_BYTES)
+    return 1;
+  return 0;
+}
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res=0;
+  struct myprogress prog;
+
+  curl = curl_easy_init();
+  if(curl) {
+    prog.lastruntime = 0;
+    prog.curl = curl;
+
+    curl_easy_setopt(curl, CURLOPT_URL, "http://example.com/");
+    curl_easy_setopt(curl, CURLOPT_PROGRESSFUNCTION, progress);
+    /* pass the struct pointer into the progress function */
+    curl_easy_setopt(curl, CURLOPT_PROGRESSDATA, &prog);
+    curl_easy_setopt(curl, CURLOPT_NOPROGRESS, 0L);
+    res = curl_easy_perform(curl);
+
+    if(res)
+      fprintf(stderr, "%s\n", curl_easy_strerror(res));
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return (int)res;
+}

docs/examples/rtsp.c

@@ -73,7 +73,7 @@ static void rtsp_options(CURL *curl, const char *uri)
   CURLcode res = CURLE_OK;
   printf("\nRTSP: OPTIONS %s\n", uri);
   my_curl_easy_setopt(curl, CURLOPT_RTSP_STREAM_URI, uri);
-  my_curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, CURL_RTSPREQ_OPTIONS);
+  my_curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, (long)CURL_RTSPREQ_OPTIONS);
   my_curl_easy_perform(curl);
 }
 
@@ -93,7 +93,7 @@ static void rtsp_describe(CURL *curl, const char *uri,
     printf("Writing SDP to '%s'\n", sdp_filename);
   }
   my_curl_easy_setopt(curl, CURLOPT_WRITEDATA, sdp_fp);
-  my_curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, CURL_RTSPREQ_DESCRIBE);
+  my_curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, (long)CURL_RTSPREQ_DESCRIBE);
   my_curl_easy_perform(curl);
   my_curl_easy_setopt(curl, CURLOPT_WRITEDATA, stdout);
   if (sdp_fp != stdout) {
@@ -109,7 +109,7 @@ static void rtsp_setup(CURL *curl, const char *uri, const char *transport)
   printf("      TRANSPORT %s\n", transport);
   my_curl_easy_setopt(curl, CURLOPT_RTSP_STREAM_URI, uri);
   my_curl_easy_setopt(curl, CURLOPT_RTSP_TRANSPORT, transport);
-  my_curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, CURL_RTSPREQ_SETUP);
+  my_curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, (long)CURL_RTSPREQ_SETUP);
   my_curl_easy_perform(curl);
 }
 
@@ -121,7 +121,7 @@ static void rtsp_play(CURL *curl, const char *uri, const char *range)
   printf("\nRTSP: PLAY %s\n", uri);
   my_curl_easy_setopt(curl, CURLOPT_RTSP_STREAM_URI, uri);
   my_curl_easy_setopt(curl, CURLOPT_RANGE, range);
-  my_curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, CURL_RTSPREQ_PLAY);
+  my_curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, (long)CURL_RTSPREQ_PLAY);
   my_curl_easy_perform(curl);
 }
 
@@ -131,7 +131,7 @@ static void rtsp_teardown(CURL *curl, const char *uri)
 {
   CURLcode res = CURLE_OK;
   printf("\nRTSP: TEARDOWN %s\n", uri);
-  my_curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, CURL_RTSPREQ_TEARDOWN);
+  my_curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, (long)CURL_RTSPREQ_TEARDOWN);
   my_curl_easy_perform(curl);
 }
 

docs/examples/sendrecv.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -64,6 +64,7 @@ int main(void)
   curl_socket_t sockfd; /* socket */
   long sockextr;
   size_t iolen;
+  curl_off_t nread;
 
   curl = curl_easy_init();
   if(curl) {
@@ -122,7 +123,9 @@ int main(void)
       if(CURLE_OK != res)
         break;
 
-      printf("Received %u bytes.\n", iolen);
+      nread = (curl_off_t)iolen;
+
+      printf("Received %" CURL_FORMAT_CURL_OFF_T " bytes.\n", nread);
     }
 
     /* always cleanup */

docs/examples/smtp-multi.c

@@ -123,13 +123,13 @@ int main(void)
    curl_easy_setopt(curl, CURLOPT_READFUNCTION, read_callback);
    curl_easy_setopt(curl, CURLOPT_MAIL_FROM, MAILFROM);
    curl_easy_setopt(curl, CURLOPT_MAIL_RCPT, rcpt_list);
-   curl_easy_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_ALL);
-   curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER,0);
-   curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0);
+   curl_easy_setopt(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_ALL);
+   curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L);
+   curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
    curl_easy_setopt(curl, CURLOPT_READDATA, &pooh);
-   curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
-   curl_easy_setopt(curl, CURLOPT_SSLVERSION, 0);
-   curl_easy_setopt(curl, CURLOPT_SSL_SESSIONID_CACHE, 0);
+   curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);
+   curl_easy_setopt(curl, CURLOPT_SSLVERSION, 0L);
+   curl_easy_setopt(curl, CURLOPT_SSL_SESSIONID_CACHE, 0L);
    curl_multi_add_handle(mcurl, curl);
 
    mp_timedout = 0;

docs/examples/smtp-tls.c

@@ -94,13 +94,13 @@ int main(void)
      * of using CURLUSESSL_TRY here, because if TLS upgrade fails, the transfer
      * will continue anyway - see the security discussion in the libcurl
      * tutorial for more details. */
-    curl_easy_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_ALL);
+    curl_easy_setopt(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_ALL);
 
     /* If your server doesn't have a valid certificate, then you can disable
      * part of the Transport Layer Security protection by setting the
      * CURLOPT_SSL_VERIFYPEER and CURLOPT_SSL_VERIFYHOST options to 0 (false).
-     *   curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0);
-     *   curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0);
+     *   curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L);
+     *   curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
      * That is, in general, a bad idea. It is still better than sending your
      * authentication details in plain text though.
      * Instead, you should get the issuer certificate (or the host certificate
@@ -135,7 +135,7 @@ int main(void)
     /* Since the traffic will be encrypted, it is very useful to turn on debug
      * information within libcurl to see what is happening during the transfer.
      */
-    curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);
 
     /* send the message (including headers) */
     res = curl_easy_perform(curl);

docs/examples/synctime.c

@@ -147,7 +147,7 @@ size_t SyncTime_CURL_WriteHeader(void *ptr, size_t size, size_t nmemb,
                                          TmpStr1 & 2? */
         AutoSyncTime = 0;
       else {
-        RetVal = sscanf ((char *)(ptr), "Date: %s %d %s %d %d:%d:%d",
+        RetVal = sscanf ((char *)(ptr), "Date: %s %hu %s %hu %hu:%hu:%hu",
                          TmpStr1, &SYSTime.wDay, TmpStr2, &SYSTime.wYear,
                          &SYSTime.wHour, &SYSTime.wMinute, &SYSTime.wSecond);
 

docs/examples/url2file.c

@@ -0,0 +1,81 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <curl/curl.h>
+
+static size_t write_data(void *ptr, size_t size, size_t nmemb, void *stream)
+{
+  size_t written = fwrite(ptr, size, nmemb, (FILE *)stream);
+  return written;
+}
+
+int main(int argc, char *argv[])
+{
+  CURL *curl_handle;
+  static const char *pagefilename = "page.out";
+  FILE *pagefile;
+
+  if(argc < 2 ) {
+    printf("Usage: %s <URL>\n", argv[0]);
+    return 1;
+  }
+
+  curl_global_init(CURL_GLOBAL_ALL);
+
+  /* init the curl session */
+  curl_handle = curl_easy_init();
+
+  /* set URL to get here */
+  curl_easy_setopt(curl_handle, CURLOPT_URL, argv[1]);
+
+  /* Switch on full protocol/debug output while testing */
+  curl_easy_setopt(curl_handle, CURLOPT_VERBOSE, 1L);
+
+  /* disable progress meter, set to 0L to enable and disable debug output */
+  curl_easy_setopt(curl_handle, CURLOPT_NOPROGRESS, 1L);
+
+  /* send all data to this function  */
+  curl_easy_setopt(curl_handle, CURLOPT_WRITEFUNCTION, write_data);
+
+  /* open the file */
+  pagefile = fopen(pagefilename, "wb");
+  if (pagefile) {
+
+    /* write the page body to this file handle. CURLOPT_FILE is also known as
+       CURLOPT_WRITEDATA*/
+    curl_easy_setopt(curl_handle, CURLOPT_FILE, pagefile);
+
+    /* get it! */
+    curl_easy_perform(curl_handle);
+
+    /* close the header file */
+    fclose(pagefile);
+  }
+
+  /* cleanup curl stuff */
+  curl_easy_cleanup(curl_handle);
+
+  return 0;
+}

docs/examples/version-check.pl

@@ -90,7 +90,7 @@ my @recent = reverse sort sortversions keys %used;
 # the most recent symbol
 my $newsym = $recent[0];
 # the most recent version
-my $newver = $doc{$newsym}; 
+my $newver = $doc{$newsym};
 
 print "The scanned source uses these symbols introduced in $newver:\n";
 

docs/libcurl/Makefile.am

@@ -82,7 +82,7 @@ PDFPAGES = curl_easy_cleanup.pdf curl_easy_getinfo.pdf			 \
 CLEANFILES = $(HTMLPAGES) $(PDFPAGES)
 
 EXTRA_DIST = $(man_MANS) $(HTMLPAGES) index.html $(PDFPAGES) libcurl.m4 ABI \
-  symbols-in-versions
+  symbols-in-versions symbols.pl
 MAN2HTML= roffit --mandir=. < $< >$@
 
 SUFFIXES = .3 .html

docs/libcurl/curl_easy_getinfo.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -44,11 +44,13 @@ The following information can be extracted:
 .IP CURLINFO_EFFECTIVE_URL
 Pass a pointer to a char pointer to receive the last used effective URL.
 .IP CURLINFO_RESPONSE_CODE
-Pass a pointer to a long to receive the last received HTTP or FTP code. This
-option was known as CURLINFO_HTTP_CODE in libcurl 7.10.7 and earlier. This
-will be zero if no server response code has been received. Note that a proxy's
-CONNECT response should be read with \fICURLINFO_HTTP_CONNECTCODE\fP and not
-this.
+Pass a pointer to a long to receive the last received HTTP, FTP or SMTP
+response code. This option was previously known as CURLINFO_HTTP_CODE in
+libcurl 7.10.7 and earlier. The value will be zero if no server response code
+has been received. Note that a proxy's CONNECT response should be read with
+\fICURLINFO_HTTP_CONNECTCODE\fP and not this.
+
+Support for SMTP responses added in 7.25.0.
 .IP CURLINFO_HTTP_CONNECTCODE
 Pass a pointer to a long to receive the last received proxy response code to a
 CONNECT request.

docs/libcurl/curl_easy_setopt.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -171,8 +171,12 @@ Set the \fIuserdata\fP argument with the \fICURLOPT_WRITEDATA\fP option.
 
 The callback function will be passed as much data as possible in all invokes,
 but you cannot possibly make any assumptions. It may be one byte, it may be
-thousands. The maximum amount of data that can be passed to the write callback
-is defined in the curl.h header file: CURL_MAX_WRITE_SIZE.
+thousands. The maximum amount of body data that can be passed to the write
+callback is defined in the curl.h header file: CURL_MAX_WRITE_SIZE (the usual
+default is 16K). If you however have \fICURLOPT_HEADER\fP set, which sends
+header data to the write callback, you can get up to
+\fICURL_MAX_HTTP_HEADER\fP bytes of header data passed into it. This usually
+means 100K.
 .IP CURLOPT_WRITEDATA
 Data pointer to pass to the file write function. If you use the
 \fICURLOPT_WRITEFUNCTION\fP option, this is the pointer you'll get as
@@ -262,7 +266,7 @@ If you forward the input arguments directly to "fseek" or "lseek", note that
 the data type for \fIoffset\fP is not the same as defined for curl_off_t on
 many systems! (Option added in 7.18.0)
 .IP CURLOPT_SEEKDATA
-Data pointer to pass to the file read function. If you use the
+Data pointer to pass to the file seek function. If you use the
 \fICURLOPT_SEEKFUNCTION\fP option, this is the pointer you'll get as input. If
 you don't specify a seek callback, NULL is passed. (Option added in 7.18.0)
 .IP CURLOPT_SOCKOPTFUNCTION
@@ -277,7 +281,7 @@ socket descriptor so additional setsockopt() calls can be done at the user's
 discretion.  Return 0 (zero) from the callback on success. Return 1 from the
 callback function to signal an unrecoverable error to the library and it will
 close the socket and return \fICURLE_COULDNT_CONNECT\fP.  (Option added in
-7.15.6.)
+7.16.0)
 
 Added in 7.21.5, the callback function may return
 \fICURL_SOCKOPT_ALREADY_CONNECTED\fP, which tells libcurl that the socket is
@@ -285,15 +289,14 @@ in fact already connected and then libcurl will not attempt to connect it.
 .IP CURLOPT_SOCKOPTDATA
 Pass a pointer that will be untouched by libcurl and passed as the first
 argument in the sockopt callback set with \fICURLOPT_SOCKOPTFUNCTION\fP.
-(Option added in 7.15.6.)
+(Option added in 7.16.0)
 .IP CURLOPT_OPENSOCKETFUNCTION
 Function pointer that should match the \fIcurl_opensocket_callback\fP
 prototype found in \fI<curl/curl.h>\fP. This function gets called by libcurl
 instead of the \fIsocket(2)\fP call. The callback's \fIpurpose\fP argument
-identifies the exact purpose for this particular socket, and currently only
-one value is supported: \fICURLSOCKTYPE_IPCXN\fP for the primary connection
-(meaning the control connection in the FTP case). Future versions of libcurl
-may support more purposes. It passes the resolved peer address as a
+identifies the exact purpose for this particular socket:
+\fICURLSOCKTYPE_IPCXN\fP is for IP based connections. Future versions of
+libcurl may support more purposes. It passes the resolved peer address as a
 \fIaddress\fP argument so the callback can modify the address or refuse to
 connect at all. The callback function should return the socket or
 \fICURL_SOCKET_BAD\fP in case no connection should be established or any error
@@ -319,7 +322,7 @@ to the \fICURLOPT_OPENSOCKETFUNCTION\fP option. Return 0 to signal success and
 1 if there was an error.  (Option added in 7.21.7)
 .IP CURLOPT_CLOSESOCKETDATA
 Pass a pointer that will be untouched by libcurl and passed as the first
-argument in the opensocket callback set with
+argument in the closesocket callback set with
 \fICURLOPT_CLOSESOCKETFUNCTION\fP.  (Option added in 7.21.7)
 .IP CURLOPT_PROGRESSFUNCTION
 Function pointer that should match the \fIcurl_progress_callback\fP prototype
@@ -354,6 +357,9 @@ of bytes actually taken care of. If that amount differs from the amount passed
 to your function, it'll signal an error to the library. This will abort the
 transfer and return \fICURL_WRITE_ERROR\fP.
 
+A complete HTTP header that is passed to this function can be up to
+\fICURL_MAX_HTTP_HEADER\fP (100K) bytes.
+
 If this option is not set, or if it is set to NULL, but
 \fICURLOPT_HEADERDATA\fP (\fICURLOPT_WRITEHEADER\fP) is set to anything but
 NULL, the function used to accept response data will be used instead. That is,
@@ -374,6 +380,9 @@ to detect it being a trailer and not an ordinary header: 1) it comes after the
 response-body. 2) it comes after the final header line (CR LF) 3) a Trailer:
 header among the regular response-headers mention what header(s) to expect in
 the trailer.
+
+For non-HTTP protocols like FTP, POP3, IMAP and SMTP this function will get
+called with the server responses to the commands that libcurl sends.
 .IP CURLOPT_WRITEHEADER
 (This option is also known as \fBCURLOPT_HEADERDATA\fP) Pass a pointer to be
 used to write the header part of the received data to. If you don't use
@@ -413,7 +422,7 @@ built against another SSL library, this functionality is absent.
 
 Function pointer that should match the following prototype: \fBCURLcode
 sslctxfun(CURL *curl, void *sslctx, void *parm);\fP This function gets called
-by libcurl just before the initialization of an SSL connection after having
+by libcurl just before the initialization of a SSL connection after having
 processed all other SSL related options to give a last chance to an
 application to modify the behaviour of openssl's ssl initialization. The
 \fIsslctx\fP parameter is actually a pointer to an openssl \fISSL_CTX\fP. If
@@ -428,7 +437,7 @@ the SSL negotiation. The SSL_CTX pointer will be a new one every time.
 To use this properly, a non-trivial amount of knowledge of the openssl
 libraries is necessary. For example, using this function allows you to use
 openssl callbacks to add additional validation code for certificates, and even
-to change the actual URI of an HTTPS request (example used in the lib509 test
+to change the actual URI of a HTTPS request (example used in the lib509 test
 case).  See also the example section for a replacement of the key, certificate
 and trust file settings.
 .IP CURLOPT_SSL_CTX_DATA
@@ -584,20 +593,162 @@ POST/PUT and a 401 or 407 is received immediately afterwards.
 .SH NETWORK OPTIONS
 .IP CURLOPT_URL
 The actual URL to deal with. The parameter should be a char * to a zero
-terminated string.
+terminated string which must be URL-encoded in the following format:
 
-If the given URL lacks the protocol part ("http://" or "ftp://" etc), it will
-attempt to guess which protocol to use based on the given host name. If the
-given protocol of the set URL is not supported, libcurl will return on error
-(\fICURLE_UNSUPPORTED_PROTOCOL\fP) when you call \fIcurl_easy_perform(3)\fP or
-\fIcurl_multi_perform(3)\fP. Use \fIcurl_version_info(3)\fP for detailed info
-on which protocols are supported.
+scheme://host:port/path
 
-The string given to CURLOPT_URL must be url-encoded and follow RFC 2396
-(http://curl.haxx.se/rfc/rfc2396.txt).
+For a greater explanation of the format please see RFC 3986
+(http://curl.haxx.se/rfc/rfc3986.txt).
 
-Starting with version 7.20.0, the fragment part of the URI will not be send as
-part of the path, which was the case previously.
+If the given URL lacks the scheme, or protocol, part ("http://" or "ftp://"
+etc), libcurl will attempt to resolve which protocol to use based on the
+given host mame. If the protocol is not supported, libcurl will return
+(\fICURLE_UNSUPPORTED_PROTOCOL\fP) when you call \fIcurl_easy_perform(3)\fP
+or \fIcurl_multi_perform(3)\fP. Use \fIcurl_version_info(3)\fP for detailed
+information on which protocols are supported.
+
+The host part of the URL contains the address of the server that you want to
+connect to. This can be the fully qualified domain name of the server, the
+local network name of the machine on your network or the IP address of the
+server or machine represented by either an IPv4 or IPv6 address. For example:
+
+http://www.example.com/
+
+http://hostname/
+
+http://192.168.0.1/
+
+http://[2001:1890:1112:1::20]/
+
+It is also possible to specify the user name and password as part of the
+host, for some protocols, when connecting to servers that require
+authentication.
+
+For example the following types of authentication support this:
+
+http://user:password@www.domain.com
+ftp://user:password@ftp.domain.com
+pop3://user:password@mail.domain.com
+
+The port is optional and when not specified libcurl will use the default port
+based on the determined or specified protocol: 80 for http, 21 for ftp and 25
+for smtp, etc. The following examples show how to specify the port:
+
+http://www.weirdserver.com:8080/ - This will connect to a web server using
+port 8080.
+
+smtp://mail.domain.com:587/ - This will connect to a smtp server on the
+alternative mail port.
+
+The path part of the URL is protocol specific and whilst some examples are
+given below this list is not conclusive:
+
+.B HTTP
+
+The path part of a HTTP request specifies the file to retrieve and from what
+directory. If the directory is not specified then the web server's root
+directory is used. If the file is omitted then the default document will be
+retrieved for either the directory specified or the root directory. The
+exact resource returned for each URL is entirely dependent on the server's
+configuration.
+
+http://www.netscape.com - This gets the main page (index.html in this
+example) from Netscape's web server.
+
+http://www.netscape.com/index.html - This returns the main page from Netscape
+by specifying the page to get.
+
+http://www.netscape.com/contactus/ - This returns the default document from
+the contactus directory.
+
+.B FTP
+
+The path part of an FTP request specifies the file to retrieve and from what
+directory. If the file part is omitted then libcurl downloads the directory
+listing for the directory specified. If the directory is omitted then
+the directory listing for the root / home directory will be returned.
+
+ftp://cool.haxx.se - This retrieves the directory listing for our FTP server.
+
+ftp://cool.haxx.se/readme.txt - This downloads the file readme.txt from the
+root directory.
+
+ftp://cool.haxx.se/libcurl/readme.txt - This downloads readme.txt from the
+libcurl directory.
+
+ftp://user:password@my.example.com/readme.txt - This retrieves the readme.txt
+file from the user's home directory. When a username and password is
+specified, everything that is specified in the path part is relative to the
+user's home directory. To retrieve files from the root directory or a
+directory underneath the root directory then the absolute path must be
+specified by prepending an additional forward slash to the beginning of the
+path.
+
+ftp://user:password@my.example.com//readme.txt - This retrieves the readme.txt
+from the root directory when logging in as a specified user.
+
+.B SMTP
+
+The path part of a SMTP request specifies the host name to present during
+communication with the mail server. If the path is omitted then libcurl will
+attempt to resolve the local computer's host name. However, this may not
+return the fully qualified domain name that is required by some mail servers
+and specifying this path allows you to set an alternative name, such as
+your machine's fully qualified domain name, which you might have obtained
+from an external function such as gethostname or getaddrinfo.
+
+smtp://mail.domain.com - This connects to the mail server at domain.com and
+sends your local computer's host name in the HELO / EHLO command.
+
+smtp://mail.domain.com/client.domain.com - This will send client.domain.com in
+the HELO / EHLO command to the mail server at domain.com.
+
+.B POP3
+
+The path part of a POP3 request specifies the mailbox (message) to retrieve.
+If the mailbox is not specified then a list of waiting messages is returned
+instead.
+
+pop3://user:password@mail.domain.com - This lists the available messages
+pop3://user:password@mail.domain.com/1 - This retrieves the first message
+
+.B SCP
+
+The path part of a SCP request specifies the file to retrieve and from what
+directory. The file part may not be omitted. The file is taken as an absolute
+path from the root directory on the server. To specify a path relative to
+the user's home directory on the server, prepend ~/ to the path portion.
+If the user name is not embedded in the URL, it can be set with the
+\fICURLOPT_USERPWD\fP or \fBCURLOPT_USERNAME\fP option.
+
+scp://user@example.com/etc/issue - This specifies the file /etc/issue
+
+scp://example.com/~/my-file - This specifies the file my-file in the
+user's home directory on the server
+
+.B SFTP
+
+The path part of a SFTP request specifies the file to retrieve and from what
+directory. If the file part is omitted then libcurl downloads the directory
+listing for the directory specified.  If the path ends in a / then a directory
+listing is returned instead of a file.  If the path is omitted entirely then
+the directory listing for the root / home directory will be returned.
+If the user name is not embedded in the URL, it can be set with the
+\fICURLOPT_USERPWD\fP or \fBCURLOPT_USERNAME\fP option.
+
+sftp://user:password@example.com/etc/issue - This specifies the file
+/etc/issue
+
+sftp://user@example.com/~/my-file - This specifies the file my-file in the
+user's home directory
+
+sftp://ssh.example.com/~/Documents/ - This requests a directory listing
+of the Documents directory under the user's home directory
+
+.B NOTES
+
+Starting with version 7.20.0, the fragment part of the URI will not be sent as
+part of the path, which was previously the case.
 
 \fICURLOPT_URL\fP is the only option that \fBmust\fP be set before
 \fIcurl_easy_perform(3)\fP is called.
@@ -630,7 +781,7 @@ proxy's port number may optionally be specified with the separate option. If
 not specified, libcurl will default to using port 1080 for proxies.
 \fICURLOPT_PROXYPORT\fP.
 
-When you tell the library to use an HTTP proxy, libcurl will transparently
+When you tell the library to use a HTTP proxy, libcurl will transparently
 convert operations to HTTP even if you specify an FTP URL etc. This may have
 an impact on what other features of the library you can use, such as
 \fICURLOPT_QUOTE\fP and similar FTP specifics that don't work unless you
@@ -660,16 +811,16 @@ specified in the proxy string \fICURLOPT_PROXY\fP.
 .IP CURLOPT_PROXYTYPE
 Pass a long with this option to set type of the proxy. Available options for
 this are \fICURLPROXY_HTTP\fP, \fICURLPROXY_HTTP_1_0\fP (added in 7.19.4),
-\fICURLPROXY_SOCKS4\fP (added in 7.15.2), \fICURLPROXY_SOCKS5\fP,
+\fICURLPROXY_SOCKS4\fP (added in 7.10), \fICURLPROXY_SOCKS5\fP,
 \fICURLPROXY_SOCKS4A\fP (added in 7.18.0) and \fICURLPROXY_SOCKS5_HOSTNAME\fP
 (added in 7.18.0). The HTTP type is default. (Added in 7.10)
 
 If you set \fBCURLOPT_PROXYTYPE\fP to \fICURLPROXY_HTTP_1_0\fP, it will only
 affect how libcurl speaks to a proxy when CONNECT is used. The HTTP version
-used for "regular" HTTP requests is instead controled with
+used for "regular" HTTP requests is instead controlled with
 \fICURLOPT_HTTP_VERSION\fP.
 .IP CURLOPT_NOPROXY
-Pass a pointer to a zero terminated string. The should be a comma- separated
+Pass a pointer to a zero terminated string. This should be a comma separated
 list of hosts which do not use a proxy, if one is specified.  The only
 wildcard is a single * character, which matches all hosts, and effectively
 disables the proxy. Each name in this list is matched as either a domain which
@@ -695,6 +846,15 @@ negotiation. (Added in 7.19.4).
 Pass a char * as parameter. This sets the interface name to use as outgoing
 network interface. The name can be an interface name, an IP address, or a host
 name.
+
+Starting with 7.24.0: If the parameter starts with "if!" then it is treated as
+only as interface name and no attempt will ever be named to do treat it as an
+IP address or to do name resolution on it.  If the parameter starts with
+\&"host!" it is treated as either an IP address or a hostname.  Hostnames are
+resolved synchronously.  Using the if! format is highly recommended when using
+the multi interfaces to avoid allowing the code to block.  If "if!" is
+specified but the parameter does not match an existing interface,
+CURLE_INTERFACE_FAILED is returned.
 .IP CURLOPT_LOCALPORT
 Pass a long. This sets the local port number of the socket used for
 connection. This can be used in combination with \fICURLOPT_INTERFACE\fP and
@@ -758,6 +918,20 @@ overdone.
 .IP CURLOPT_ADDRESS_SCOPE
 Pass a long specifying the scope_id value to use when connecting to IPv6
 link-local or site-local addresses. (Added in 7.19.0)
+.IP CURLOPT_TCP_KEEPALIVE
+Pass a long. If set to 1, TCP keepalive probes will be sent. The delay and
+frequency of these probes can be controlled by the \fICURLOPT_TCP_KEEPIDLE\fP
+and \fICURLOPT_TCP_KEEPINTVL\fP options, provided the operating system supports
+them. Set to 0 (default behavior) to disable keepalive probes (Added in
+7.25.0).
+.IP CURLOPT_TCP_KEEPIDLE
+Pass a long. Sets the delay, in seconds, that the operating system will wait
+while the connection is idle before sending keepalive probes. Not all operating
+systems support this option. (Added in 7.25.0)
+.IP CURLOPT_TCP_KEEPINTVL
+Pass a long. Sets the interval, in seconds, that the operating system will wait
+between sending keepalive probes. Not all operating systems support this
+option. (Added in 7.25.0)
 .SH NAMES and PASSWORDS OPTIONS (Authentication)
 .IP CURLOPT_NETRC
 This parameter controls the preference of libcurl between using user names and
@@ -890,8 +1064,8 @@ HTTP NTLM authentication. A proprietary protocol invented and used by
 Microsoft. It uses a challenge-response and hash concept similar to Digest, to
 prevent the password from being eavesdropped.
 
-You need to build libcurl with OpenSSL support for this option to work, or
-build libcurl on Windows.
+You need to build libcurl with either OpenSSL, GnuTLS or NSS support for this
+option to work, or build libcurl on Windows.
 .IP CURLAUTH_NTLM_WB
 NTLM delegating to winbind helper. Authentication is performed by a separate
 binary application that is executed when needed. The name of the application
@@ -933,12 +1107,12 @@ You need to build libcurl with GnuTLS or OpenSSL with TLS-SRP support for this
 to work. (Added in 7.21.4)
 .RE
 .IP CURLOPT_TLSAUTH_USERNAME
-Pass a char * as parameter, which should point to the zero-terminated username
+Pass a char * as parameter, which should point to the zero terminated username
 to use for the TLS authentication method specified with the
 \fICURLOPT_TLSAUTH_TYPE\fP option. Requires that the
 \fICURLOPT_TLS_PASSWORD\fP option also be set. (Added in 7.21.4)
 .IP CURLOPT_TLSAUTH_PASSWORD
-Pass a char * as parameter, which should point to the zero-terminated password
+Pass a char * as parameter, which should point to the zero terminated password
 to use for the TLS authentication method specified with the
 \fICURLOPT_TLSAUTH_TYPE\fP option. Requires that the
 \fICURLOPT_TLS_USERNAME\fP option also be set. (Added in 7.21.4)
@@ -958,7 +1132,7 @@ Pass a parameter set to 1 to enable this. When enabled, libcurl will
 automatically set the Referer: field in requests where it follows a Location:
 redirect.
 .IP CURLOPT_ACCEPT_ENCODING
-Sets the contents of the Accept-Encoding: header sent in an HTTP request, and
+Sets the contents of the Accept-Encoding: header sent in a HTTP request, and
 enables decoding of a response when a Content-Encoding: header is received.
 Three encodings are supported: \fIidentity\fP, which does nothing,
 \fIdeflate\fP which requests the server to compress its response using the
@@ -986,7 +1160,7 @@ by both HTTP clients and HTTP servers.
 (Added in 7.21.6)
 .IP CURLOPT_FOLLOWLOCATION
 A parameter set to 1 tells the library to follow any Location: header that the
-server sends as part of an HTTP header.
+server sends as part of a HTTP header.
 
 This means that the library will re-send the same request on the new location
 and follow new Location: headers all the way until no more such headers are
@@ -1009,12 +1183,13 @@ Setting the limit to 0 will make libcurl refuse any redirect. Set it to -1 for
 an infinite number of redirects (which is the default)
 .IP CURLOPT_POSTREDIR
 Pass a bitmask to control how libcurl acts on redirects after POSTs that get a
-301 or 302 response back.  A parameter with bit 0 set (value
+301, 302 or 303 response back.  A parameter with bit 0 set (value
 \fBCURL_REDIR_POST_301\fP) tells the library to respect RFC 2616/10.3.2 and
 not convert POST requests into GET requests when following a 301
 redirection. Setting bit 1 (value CURL_REDIR_POST_302) makes libcurl maintain
-the request method after a 302 redirect. CURL_REDIR_POST_ALL is a convenience
-define that sets both bits.
+the request method after a 302 redirect. Setting bit 2 (value
+\fBCURL_REDIR_POST_303) makes libcurl maintain the request method after a 302
+redirect. CURL_REDIR_POST_ALL is a convenience define that sets both bits.
 
 The non-RFC behaviour is ubiquitous in web browsers, so the library does the
 conversion by default to maintain consistency. However, a server may require a
@@ -1066,7 +1241,7 @@ If you issue a POST request and then want to make a HEAD or GET using the same
 re-used handle, you must explicitly set the new request type using
 \fICURLOPT_NOBODY\fP or \fICURLOPT_HTTPGET\fP or similar.
 .IP CURLOPT_POSTFIELDS
-Pass a void * as parameter, which should be the full data to post in an HTTP
+Pass a void * as parameter, which should be the full data to post in a HTTP
 POST operation. You must make sure that the data is formatted the way you want
 the server to receive it. libcurl will not convert or encode it for you. Most
 web servers will assume this data to be url-encoded.
@@ -1101,7 +1276,7 @@ Pass a curl_off_t as parameter. Use this to set the size of the
 data to figure out the size. This is the large file version of the
 \fICURLOPT_POSTFIELDSIZE\fP option. (Added in 7.11.1)
 .IP CURLOPT_COPYPOSTFIELDS
-Pass a char * as parameter, which should be the full data to post in an HTTP
+Pass a char * as parameter, which should be the full data to post in a HTTP
 POST operation. It behaves as the \fICURLOPT_POSTFIELDS\fP option, but the
 original data are copied by the library, allowing the application to overwrite
 the original data after setting this option.
@@ -1188,7 +1363,7 @@ option and thus you need to concatenate them all in one single string. Set
 multiple cookies in one string like this: "name1=content1; name2=content2;"
 etc.
 
-This option sets the cookie header explictly in the outgoing request(s). If
+This option sets the cookie header explicitly in the outgoing request(s). If
 multiple requests are done due to authentication, followed redirections or
 similar, they will all get this cookie passed on.
 
@@ -1273,25 +1448,48 @@ transfer decoding will be disabled, if set to 1 it is enabled
 option is set to zero. (added in 7.16.2)
 .SH SMTP OPTIONS
 .IP CURLOPT_MAIL_FROM
-Pass a pointer to a zero terminated string as parameter. It will be used to
-specify the sender address in a mail when sending an SMTP mail with libcurl.
+Pass a pointer to a zero terminated string as parameter. This should be used
+to specify the sender's email address when sending SMTP mail with libcurl.
 
-An originator email address in SMTP lingo is specified within angle brackets
-(<>) which libcurl will not add for you before version 7.21.4. Failing to
-provide such brackets may cause the server to reject your mail.
+An originator email address should be specified with angled brackets (<>)
+around it, which if not specified, will be added by libcurl from version
+7.21.4 onwards. Failing to provide such brackets may cause the server to
+reject the email.
+
+If this parameter is not specified then an empty address will be sent to the
+mail server which may or may not cause the email to be rejected.
 
 (Added in 7.20.0)
 .IP CURLOPT_MAIL_RCPT
 Pass a pointer to a linked list of recipients to pass to the server in your
-SMTP mail request.  The linked list should be a fully valid list of \fBstruct
+SMTP mail request. The linked list should be a fully valid list of \fBstruct
 curl_slist\fP structs properly filled in. Use \fIcurl_slist_append(3)\fP to
 create the list and \fIcurl_slist_free_all(3)\fP to clean up an entire list.
 
-Each recipient in SMTP lingo is specified with angle brackets (<>), but should
-you not use an angle bracket as first letter libcurl will assume you provide a
-single email address only and enclose that with angle brackets for you.
+Each recipient should be specified within a pair of angled brackets (<>),
+however, should you not use an angled bracket as the first character libcurl
+will assume you provided a single email address and enclose that address
+within brackets for you.
 
 (Added in 7.20.0)
+.IP CURLOPT_MAIL_AUTH
+Pass a pointer to a zero terminated string as parameter. This will be used
+to specify the authentication address (identity) of a submitted message that
+is being relayed to another server.
+
+This optional parameter allows co-operating agents in a trusted environment to
+communicate the authentication of individual messages and should only be used
+by the application program, using libcurl, if the application is itself a
+mail server acting in such an environment. If the application is operating as
+such and the AUTH address is not known or is invalid, then an empty string
+should be used for this parameter.
+
+Unlike CURLOPT_MAIL_FROM and CURLOPT_MAIL_RCPT, the address should not be
+specified within a pair of angled brackets (<>). However, if an empty string
+is used then a pair of brackets will be sent by libcurl as required by
+RFC-2554.
+
+(Added in 7.24.0)
 .SH TFTP OPTIONS
 .IP CURLOPT_TFTP_BLKSIZE
 Specify block size to use for TFTP data transmission. Valid range as per RFC
@@ -1336,9 +1534,9 @@ fully valid list of 'struct curl_slist' structs properly filled in with text
 strings. Use \fIcurl_slist_append(3)\fP to append strings (commands) to the
 list, and clear the entire list afterwards with
 \fIcurl_slist_free_all(3)\fP. Disable this operation again by setting a NULL
-to this option. When speaking to a FTP server, prefix the command with an
-asterisk (*) to make libcurl continue even if the command fails as by default
-libcurl will stop at first failure.
+to this option. When speaking to a FTP (or SFTP since 7.24.0) server, prefix
+the command with an asterisk (*) to make libcurl continue even if the command
+fails as by default libcurl will stop at first failure.
 
 The set of valid FTP commands depends on the server (see RFC959 for a list of
 mandatory commands).
@@ -1358,7 +1556,7 @@ Pass a pointer to a linked list of FTP commands to pass to the server after
 the transfer type is set. The linked list should be a fully valid list of
 struct curl_slist structs properly filled in as described for
 \fICURLOPT_QUOTE\fP. Disable this operation again by setting a NULL to this
-option. Before version 7.15.6, if you also set \fICURLOPT_NOBODY\fP to 1, this
+option. Before version 7.16.0, if you also set \fICURLOPT_NOBODY\fP to 1, this
 option didn't work.
 .IP CURLOPT_DIRLISTONLY
 A parameter set to 1 tells the library to just list the names of files in a
@@ -1471,7 +1669,7 @@ a reply.
 Initiate the shutdown and wait for a reply.
 .RE
 .IP CURLOPT_FTP_ACCOUNT
-Pass a pointer to a zero-terminated string (or NULL to disable). When an FTP
+Pass a pointer to a zero terminated string (or NULL to disable). When an FTP
 server asks for "account data" after user name and password has been provided,
 this data is sent off using the ACCT command. (Added in 7.13.0)
 .IP CURLOPT_FTP_FILEMETHOD
@@ -1513,7 +1711,7 @@ needed for this method)\fP  (Added in 7.20.0)
 When sent by a client, this method changes the description of the session. For
 example, if a client is using the server to record a meeting, the client can
 use Announce to inform the server of all the meta-information about the
-session.  ANNOUNCE acts like an HTTP PUT or POST just like
+session.  ANNOUNCE acts like a HTTP PUT or POST just like
 \fICURL_RTSPREQ_SET_PARAMETER\fP (Added in 7.20.0)
 .IP CURL_RTSPREQ_SETUP
 Setup is used to initialize the transport layer for the session. The
@@ -1536,7 +1734,7 @@ different connections.  (Added in 7.20.0)
 .IP CURL_RTSPREQ_GET_PARAMETER
 Retrieve a parameter from the server. By default, libcurl will automatically
 include a \fIContent-Type: text/parameters\fP header on all non-empty requests
-unless a custom one is set. GET_PARAMETER acts just like an HTTP PUT or POST
+unless a custom one is set. GET_PARAMETER acts just like a HTTP PUT or POST
 (see \fICURL_RTSPREQ_SET_PARAMETER\fP).
 Applications wishing to send a heartbeat message (e.g. in the presence of a
 server-specified timeout) should send use an empty GET_PARAMETER request.
@@ -1544,9 +1742,9 @@ server-specified timeout) should send use an empty GET_PARAMETER request.
 .IP CURL_RTSPREQ_SET_PARAMETER
 Set a parameter on the server. By default, libcurl will automatically include
 a \fIContent-Type: text/parameters\fP header unless a custom one is set. The
-interaction with SET_PARAMTER is much like an HTTP PUT or POST. An application
-may either use \fICURLOPT_UPLOAD\fP with \fICURLOPT_READDATA\fP like an HTTP
-PUT, or it may use \fICURLOPT_POSTFIELDS\fP like an HTTP POST. No chunked
+interaction with SET_PARAMTER is much like a HTTP PUT or POST. An application
+may either use \fICURLOPT_UPLOAD\fP with \fICURLOPT_READDATA\fP like a HTTP
+PUT, or it may use \fICURLOPT_POSTFIELDS\fP like a HTTP POST. No chunked
 transfers are allowed, so the application must set the
 \fICURLOPT_INFILESIZE\fP in the former and \fICURLOPT_POSTFIELDSIZE\fP in the
 latter. Also, there is no use of multi-part POSTs within RTSP. (Added in
@@ -1608,7 +1806,7 @@ over FTP. This is a known limitation/flaw that nobody has rectified. libcurl
 simply sets the mode to ASCII and performs a standard transfer.
 .IP CURLOPT_PROXY_TRANSFER_MODE
 Pass a long. If the value is set to 1 (one), it tells libcurl to set the
-transfer mode (binary or ASCII) for FTP transfers done via an HTTP proxy, by
+transfer mode (binary or ASCII) for FTP transfers done via a HTTP proxy, by
 appending ;type=a or ;type=i to the URL. Without this setting, or it being set
 to 0 (zero, the default), \fICURLOPT_TRANSFERTEXT\fP has no effect when doing
 FTP via a proxy. Beware that not all proxies support this feature.  (Added in
@@ -1645,16 +1843,20 @@ source file to the remote target file.
 Pass a curl_off_t as parameter. It contains the offset in number of bytes that
 you want the transfer to start from. (Added in 7.11.0)
 .IP CURLOPT_CUSTOMREQUEST
-Pass a pointer to a zero terminated string as parameter. It will be used
-instead of GET or HEAD when doing an HTTP request, or instead of LIST or NLST
-when doing a FTP directory listing. This is useful for doing DELETE or other
-more or less obscure HTTP requests. Don't do this at will, make sure your
-server supports the command first.
+Pass a pointer to a zero terminated string as parameter. It can be used to
+specify the request instead of GET or HEAD when performing HTTP based
+requests, instead of LIST and NLST when performing FTP directory listings and
+instead of LIST and RETR when issuing POP3 based commands. This is
+particularly useful, for example, for performing a HTTP DELETE request or a
+POP3 DELE command.
 
+Please don't perform this at will, on HTTP based requests, by making sure
+your server supports the command you are sending first.
+ 
 When you change the request method by setting \fBCURLOPT_CUSTOMREQUEST\fP to
-something, you don't actually change how libcurl behaves or acts in regards to
-the particular request method, it will only change the actual string sent in
-the request.
+something, you don't actually change how libcurl behaves or acts in regards
+to the particular request method, it will only change the actual string sent
+in the request.
 
 For example: if you tell libcurl to do a HEAD request, but then change the
 request to a "GET" with \fBCURLOPT_CUSTOMREQUEST\fP you'll still see libcurl
@@ -1666,12 +1868,14 @@ POST, use \fICURLOPT_POST\fP or \fICURLOPT_POSTFIELDS\fP and so on.
 Restore to the internal default by setting this to NULL.
 
 Many people have wrongly used this option to replace the entire request with
-their own, including multiple headers and POST contents. While that might work
-in many cases, it will cause libcurl to send invalid requests and it could
-possibly confuse the remote server badly. Use \fICURLOPT_POST\fP and
+their own, including multiple headers and POST contents. While that might
+work in many cases, it will cause libcurl to send invalid requests and it
+could possibly confuse the remote server badly. Use \fICURLOPT_POST\fP and
 \fICURLOPT_POSTFIELDS\fP to set POST data. Use \fICURLOPT_HTTPHEADER\fP to
 replace or extend the set of headers sent by libcurl. Use
 \fICURLOPT_HTTP_VERSION\fP to change HTTP version.
+
+(Support for POP3 added in 7.26.0)
 .IP CURLOPT_FILETIME
 Pass a long. If it is 1, libcurl will attempt to get the modification date of
 the remote document in this operation. This requires that the remote server
@@ -1680,11 +1884,11 @@ sends the time or replies to a time querying command. The
 can be used after a transfer to extract the received time (if any).
 .IP CURLOPT_NOBODY
 A parameter set to 1 tells the library to not include the body-part in the
-output. This is only relevant for protocols that have separate header and body
-parts. On HTTP(S) servers, this will make libcurl do a HEAD request.
+output. This is only relevant for protocols that have separate header and
+body parts. On HTTP(S) servers, this will make libcurl do a HEAD request.
 
-To change request to GET, you should use \fICURLOPT_HTTPGET\fP. Change request
-to POST with \fICURLOPT_POST\fP etc.
+To change request to GET, you should use \fICURLOPT_HTTPGET\fP. Change
+request to POST with \fICURLOPT_POST\fP etc.
 .IP CURLOPT_INFILESIZE
 When uploading a file to a remote site, this option should be used to tell
 libcurl what the expected size of the infile is. This value should be passed
@@ -1693,6 +1897,9 @@ as a long. See also \fICURLOPT_INFILESIZE_LARGE\fP.
 For uploading using SCP, this option or \fICURLOPT_INFILESIZE_LARGE\fP is
 mandatory.
 
+When sending emails using SMTP, this command can be used to specify the
+optional SIZE parameter for the MAIL FROM command. (Added in 7.23.0)
+
 This option does not limit how much data libcurl will actually send, as that
 is controlled entirely by what the read callback returns.
 .IP CURLOPT_INFILESIZE_LARGE
@@ -1761,6 +1968,8 @@ SIGALRM to enable time-outing system calls.
 
 In unix-like systems, this might cause signals to be used unless
 \fICURLOPT_NOSIGNAL\fP is set.
+
+Default timeout is 0 (zero) which means it never times out.
 .IP CURLOPT_TIMEOUT_MS
 Like \fICURLOPT_TIMEOUT\fP but takes number of milliseconds instead. If
 libcurl is built to use the standard system name resolver, that portion
@@ -1822,9 +2031,9 @@ re-use (default behavior).
 .IP CURLOPT_CONNECTTIMEOUT
 Pass a long. It should contain the maximum time in seconds that you allow the
 connection to the server to take.  This only limits the connection phase, once
-it has connected, this option is of no more use. Set to zero to disable
-connection timeout (it will then only timeout on the system's internal
-timeouts). See also the \fICURLOPT_TIMEOUT\fP option.
+it has connected, this option is of no more use. Set to zero to switch to the
+default built-in connection timeout - 300 seconds. See also the
+\fICURLOPT_TIMEOUT\fP option.
 
 In unix-like systems, this might cause signals to be used unless
 \fICURLOPT_NOSIGNAL\fP is set.
@@ -1896,6 +2105,24 @@ resolves, by including a string in the linked list that uses the format
 and port number must exactly match what was already added previously.
 
 (Added in 7.21.3)
+.IP CURLOPT_DNS_SERVERS
+Set the list of DNS servers to be used instead of the system default.
+The format of the dns servers option is:
+
+host[:port][,host[:port]]...
+
+For example:
+
+192.168.1.100,192.168.1.101,3.4.5.6
+
+This option requires that libcurl was built with a resolver backend that
+supports this operation. The c-ares backend is the only such one.
+
+(Added in 7.24.0)
+.IP CURLOPT_ACCEPTTIMEOUT_MS
+Pass a long telling libcurl the maximum number of milliseconds to wait for a
+server to connect back to libcurl when an active FTP connection is used. If no
+timeout is set, the internal default of 60000 will be used. (Added in 7.24.0)
 .SH SSL and SECURITY OPTIONS
 .IP CURLOPT_SSLCERT
 Pass a pointer to a zero terminated string as parameter. The string should be
@@ -1968,7 +2195,7 @@ Pass a long as parameter. By default, curl assumes a value of 1.
 This option determines whether curl verifies the authenticity of the peer's
 certificate. A value of 1 means curl verifies; 0 (zero) means it doesn't.
 
-When negotiating an SSL connection, the server sends a certificate indicating
+When negotiating a SSL connection, the server sends a certificate indicating
 its identity.  Curl verifies whether the certificate is authentic, i.e. that
 you can trust that the server is who the certificate says it is.  This trust
 is based on a chain of digital signatures, rooted in certification authority
@@ -2117,6 +2344,16 @@ this to 1 to enable it. By default all transfers are done using the
 cache. While nothing ever should get hurt by attempting to reuse SSL
 session-IDs, there seem to be broken SSL implementations in the wild that may
 require you to disable this in order for you to succeed. (Added in 7.16.0)
+.IP CURLOPT_SSL_OPTIONS
+Pass a long with a bitmask to tell libcurl about specific SSL behaviors.
+
+CURLSSLOPT_ALLOW_BEAST is the only supported bit and by setting this the user
+will tell libcurl to not attempt to use any work-arounds for a security flaw
+in the SSL3 and TLS1.0 protocols.  If this option isn't used or this bit is
+set to 0, the SSL layer libcurl uses may use a work-around for this flaw
+although it might cause interoperability problems with some (older) SSL
+implementations. WARNING: avoiding this work-around loosens the security, and
+by setting this option to 1 you ask for exactly that. (Added in 7.25.0)
 .IP CURLOPT_KRBLEVEL
 Pass a char * as parameter. Set the kerberos security level for FTP; this also
 enables kerberos awareness.  This is a string, \&'clear', \&'safe',
@@ -2137,8 +2374,8 @@ GSS_C_DELEG_POLICY_FLAG was available at compile-time.
 .IP CURLOPT_SSH_AUTH_TYPES
 Pass a long set to a bitmask consisting of one or more of
 CURLSSH_AUTH_PUBLICKEY, CURLSSH_AUTH_PASSWORD, CURLSSH_AUTH_HOST,
-CURLSSH_AUTH_KEYBOARD. Set CURLSSH_AUTH_ANY to let libcurl pick one.
-(Added in 7.16.1)
+CURLSSH_AUTH_KEYBOARD. Set CURLSSH_AUTH_ANY to let libcurl pick one. Currently
+CURLSSH_AUTH_HOST has no effect. (Added in 7.16.1)
 .IP CURLOPT_SSH_HOST_PUBLIC_KEY_MD5
 Pass a char * pointing to a string containing 32 hexadecimal digits. The
 string should be the 128 bit MD5 checksum of the remote host's public key, and
@@ -2149,6 +2386,9 @@ Pass a char * pointing to a file name for your public key. If not used,
 libcurl defaults to \fB$HOME/.ssh/id_dsa.pub\fP if the HOME environment
 variable is set, and just "id_dsa.pub" in the current directory if HOME is not
 set.  (Added in 7.16.1)
+If an empty string is passed, libcurl will pass no public key to libssh2
+which then tries to compute it from the private key, this is known to work
+when libssh2 1.4.0+ is linked against OpenSSL. (Added in 7.26.0)
 .IP CURLOPT_SSH_PRIVATE_KEYFILE
 Pass a char * pointing to a file name for your private key. If not used,
 libcurl defaults to \fB$HOME/.ssh/id_dsa\fP if the HOME environment variable

docs/libcurl/curl_easy_strerror.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -23,9 +23,9 @@
 .SH NAME
 curl_easy_strerror - return string describing error code
 .SH SYNOPSIS
-.nf
-.B #include <curl/curl.h>
-.BI "const char *curl_easy_strerror(CURLcode " errornum ");"
+#include <curl/curl.h>
+
+const char *curl_easy_strerror(CURLcode errornum);
 .SH DESCRIPTION
 The curl_easy_strerror() function returns a string describing the CURLcode
 error code passed in the argument \fIerrornum\fP.

docs/libcurl/curl_multi_fdset.3

@@ -40,19 +40,28 @@ but be sure to FD_ZERO them before calling this function as
 otherwise remove any others. The \fIcurl_multi_perform(3)\fP function should be
 called as soon as one of them is ready to be read from or written to.
 
-To be sure to have up-to-date results, you should call
-\fIcurl_multi_perform\fP until it does not return CURLM_CALL_MULTI_PERFORM
-prior to calling \fIcurl_multi_fdset\fP.  This will make sure that libcurl has
-updated the handles' socket states.
-
 If no file descriptors are set by libcurl, \fImax_fd\fP will contain -1 when
 this function returns. Otherwise it will contain the higher descriptor number
-libcurl set.
+libcurl set. When libcurl returns -1 in \fImax_fd\fP, it is because libcurl
+currently does something that isn't possible for your application to monitor
+with a socket and unfortunately you can then not know exactly when the current
+action is completed using select(). When max_fd returns with -1, you need to
+wait a while and then proceed and call \fIcurl_multi_perform\fP anyway. How
+long to wait? I would suggest 100 milliseconds at least, but you may want to
+test it out in your own particular conditions to find a suitable value.
 
 When doing select(), you should use \fBcurl_multi_timeout\fP to figure out how
 long to wait for action. Call \fIcurl_multi_perform\fP even if no activity has
 been seen on the fd_sets after the timeout expires as otherwise internal
 retries and timeouts may not work as you'd think and want.
+
+If one of the sockets used by libcurl happens to be larger than what can be
+set in an fd_set, which on POSIX systems means that the file descriptor is
+larger than FD_SETSIZE, then libcurl will try to not set it. Setting a too
+large file descriptor in an fd_set implies an out of bounds write which can
+cause crashes, or worse. The effect of NOT storing it will possibly save you
+from the crash, but will make your program NOT wait for sockets it should wait
+for...
 .SH RETURN VALUE
 CURLMcode type, general libcurl multi interface error code. See
 \fIlibcurl-errors(3)\fP

docs/libcurl/curl_share_setopt.3

@@ -64,6 +64,11 @@ Cached DNS hosts will be shared across the easy handles using this shared
 object. Note that when you use the multi interface, all easy handles added to
 the same multi handle will share DNS cache by default without this having to
 be used!
+.IP CURL_LOCK_DATA_SSL_SESSION
+SSL session IDs will be shared accross the easy handles using this shared
+object. This will reduce the time spent in the SSL handshake when reconnecting
+to the same server. Note SSL session IDs are reused within the same easy handle
+by default.
 .RE
 .IP CURLSHOPT_UNSHARE
 This option does the opposite of \fICURLSHOPT_SHARE\fP. It specifies that

docs/libcurl/libcurl-errors.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -66,20 +66,21 @@ remote server is probably not an OK FTP server.
 .IP "CURLE_REMOTE_ACCESS_DENIED (9)"
 We were denied access to the resource given in the URL.  For FTP, this occurs
 while trying to change to the remote directory.
+.IP "CURLE_FTP_ACCEPT_FAILED (10)"
+While waiting for the server to connect back when an active FTP session is
+used, an error code was sent over the control connection or similar.
 .IP "CURLE_FTP_WEIRD_PASS_REPLY (11)"
 After having sent the FTP password to the server, libcurl expects a proper
 reply. This error code indicates that an unexpected code was returned.
+.IP "CURLE_FTP_ACCEPT_TIMEOUT (12)"
+During an active FTP session while waiting for the server to connect, the
+\fICURLOPT_ACCEPTTIMOUT_MS\fP (or the internal default) timeout expired.
 .IP "CURLE_FTP_WEIRD_PASV_REPLY (13)"
 libcurl failed to get a sensible result back from the server as a response to
 either a PASV or a EPSV command. The server is flawed.
 .IP "CURLE_FTP_WEIRD_227_FORMAT (14)"
 FTP servers return a 227-line as a response to a PASV command. If libcurl
 fails to parse that line, this return code is passed back.
-.IP "CURLE_FTP_PRET_FAILED (84)"
-The FTP server does not understand the PRET command at all or does not support
-the given argument. Be careful when using \fICURLOPT_CUSTOMREQUEST\fP, a
-custom LIST command will be sent with PRET CMD before PASV as well. (Added in
-7.20.0)
 .IP "CURLE_FTP_CANT_GET_HOST (15)"
 An internal failure to lookup the host used for the new connection.
 .IP "CURLE_FTP_COULDNT_SET_TYPE (17)"
@@ -227,7 +228,10 @@ Failed to load CRL file (Added in 7.19.0)
 .IP "CURLE_SSL_ISSUER_ERROR (83)"
 Issuer check failed (Added in 7.19.0)
 .IP "CURLE_FTP_PRET_FAILED (84)"
-PRET command failed
+The FTP server does not understand the PRET command at all or does not support
+the given argument. Be careful when using \fICURLOPT_CUSTOMREQUEST\fP, a
+custom LIST command will be sent with PRET CMD before PASV as well. (Added in
+7.20.0)
 .IP "CURLE_RTSP_CSEQ_ERROR (85)"
 Mismatch of RTSP CSeq numbers.
 .IP "CURLE_RTSP_SESSION_ERROR (86)"
@@ -277,3 +281,6 @@ An invalid share object was passed to the function.
 .IP "CURLSHE_NOMEM (4)"
 Not enough memory was available.
 (Added in 7.12.0)
+.IP "CURLSHE_NOT_BUILT_IN (5)"
+The requsted sharing could not be done because the library you use don't have
+that particular feature enabled. (Added in 7.23.0)

docs/libcurl/libcurl-multi.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -82,14 +82,6 @@ might need attention. This also makes it very easy for your program to wait
 for input on your own private file descriptors at the same time or perhaps
 timeout every now and then, should you want that.
 
-A little note here about the return codes from the multi functions, and
-especially the \fIcurl_multi_perform(3)\fP: if you receive
-\fICURLM_CALL_MULTI_PERFORM\fP, this basically means that you should call
-\fIcurl_multi_perform(3)\fP again, before you select() on more actions. You
-don't have to do it immediately, but the return code means that libcurl may
-have more data available to return or that there may be more data to send off
-before it is "satisfied".
-
 \fIcurl_multi_perform(3)\fP stores the number of still running transfers in
 one of its input arguments, and by reading that you can figure out when all
 the transfers in the multi handles are done. 'done' does not mean
@@ -118,23 +110,40 @@ If you want to re-use an easy handle that was added to the multi handle for
 transfer, you must first remove it from the multi stack and then re-add it
 again (possibly after having altered some options at your own choice).
 .SH "MULTI_SOCKET"
-Since 7.16.0, the \fIcurl_multi_socket_action(3)\fP function offers a way for
-applications to not only avoid being forced to use select(), but it also
-offers a much more high-performance API that will make a significant
-difference for applications using large numbers of simultaneous connections.
+\fIcurl_multi_socket_action(3)\fP function offers a way for applications to
+not only avoid being forced to use select(), but it also offers a much more
+high-performance API that will make a significant difference for applications
+using large numbers of simultaneous connections.
 
-\fIcurl_multi_socket_action(3)\fP is then used
-instead of \fIcurl_multi_perform(3)\fP.
+\fIcurl_multi_socket_action(3)\fP is then used instead of
+\fIcurl_multi_perform(3)\fP.
+
+When using this API, you add easy handles to the multi handle just as with the
+normal multi interface. Then you also set two callbacks with the
+CURLMOPT_SOCKETFUNCTION and CURLMOPT_TIMERFUNCTION options to
+\fIcurl_multi_setopt(3)\fP.
+
+The API is then designed to inform your application about which sockets
+libcurl is currently using and for what activities (read and/or write) on
+those sockets your application is expected to wait for.
+
+Your application must then make sure to receive all sockets informed about in
+the CURLMOPT_SOCKETFUNCTION callback and make sure it reacts on the given
+activity on them. When a socket has the given activity, you call
+\fIcurl_multi_socket_action(3)\fP specifying which socket and action there
+are.
+
+The CURLMOPT_TIMERFUNCTION callback is called to set a timeout. When that
+timeout expires, your application should call the
+\fIcurl_multi_socket_action(3)\fP function saying it was due to a timeout.
 .SH "BLOCKING"
 A few areas in the code are still using blocking code, even when used from the
 multi interface. While we certainly want and intend for these to get fixed in
 the future, you should be aware of the following current restrictions:
 
 .nf
- - Name resolves on non-windows unless c-ares is used
- - GnuTLS SSL connections
+ - Name resolves unless the c-ares or threaded-resolver backends are used
  - NSS SSL connections
- - Active FTP connections
  - HTTP proxy CONNECT operations
  - SOCKS proxy handshakes
  - file:// transfers

docs/libcurl/libcurl-tutorial.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -249,9 +249,11 @@ complication for you. Given simply the URL to a file, libcurl will take care
 of all the details needed to get the file moved from one machine to another.
 
 .SH "Multi-threading Issues"
-The first basic rule is that you must \fBnever\fP share a libcurl handle (be
-it easy or multi or whatever) between multiple threads. Only use one handle in
-one thread at a time.
+The first basic rule is that you must \fBnever\fP simultaneously share a
+libcurl handle (be it easy or multi or whatever) between multiple
+threads. Only use one handle in one thread at any time. You can pass the
+handles around among threads, but you must never use a single handle from more
+than one thread at any given time.
 
 libcurl is completely thread safe, except for two issues: signals and SSL/TLS
 handlers. Signals are used for timing out name resolves (during DNS lookup) -
@@ -815,10 +817,6 @@ This header is required by HTTP 1.1 and even many 1.0 servers and should be
 the name of the server we want to talk to. This includes the port number if
 anything but default.
 
-.IP "Pragma"
-\&"no-cache". Tells a possible proxy to not grab a copy from the cache but to
-fetch a fresh one.
-
 .IP "Accept"
 \&"*/*".
 
@@ -1301,9 +1299,7 @@ ones at any time), you start the transfers by calling
 
 \fIcurl_multi_perform(3)\fP is asynchronous. It will only execute as little as
 possible and then return back control to your program. It is designed to never
-block. If it returns CURLM_CALL_MULTI_PERFORM you better call it again soon,
-as that is a signal that it still has local data to send or remote data to
-receive.
+block.
 
 The best usage of this interface is when you do a select() on all possible
 file descriptors or sockets to know when to call libcurl again. This also
@@ -1339,9 +1335,21 @@ to figure out success on each individual transfer.
  [ seeding, passwords, keys, certificates, ENGINE, ca certs ]
 
 .SH "Sharing Data Between Easy Handles"
+You can share some data between easy handles when the easy interface is used,
+and some data is share automatically when you use the multi interface.
 
- [ fill in ]
+When you add easy handles to a multi handle, these easy handles will
+automatically share a lot of the data that otherwise would be kept on a
+per-easy handle basis when the easy interface is used.
 
+The DNS cache is shared between handles within a multi handle, making
+subsequent name resolvings faster and the connection pool that is kept to
+better allow persistent connections and connection re-use is shared. If you're
+using the easy interface, you can still share these between specific easy
+handles by using the share interface, see \fIlibcurl-share(3)\fP.
+
+Some things are never shared automatically, not within multi handles, like for
+example cookies so the only way to share that is with the share interface.
 .SH "Footnotes"
 
 .IP "[1]"

docs/libcurl/libcurl.m4

@@ -146,7 +146,7 @@ AC_DEFUN([LIBCURL_CHECK_CONFIG],
            _libcurl_save_libs=$LIBS
            LIBS="$LIBCURL $LIBS"
 
-           AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <curl/curl.h>],[
+           AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <curl/curl.h>]],[[
 /* Try and use a few common options to force a failure if we are
    missing symbols or can't link. */
 int x;
@@ -157,7 +157,8 @@ x=CURLOPT_FILE;
 x=CURLOPT_ERRORBUFFER;
 x=CURLOPT_STDERR;
 x=CURLOPT_VERBOSE;
-])],libcurl_cv_lib_curl_usable=yes,libcurl_cv_lib_curl_usable=no)
+if (x) ;
+]])],libcurl_cv_lib_curl_usable=yes,libcurl_cv_lib_curl_usable=no)
 
            CPPFLAGS=$_libcurl_save_cppflags
            LIBS=$_libcurl_save_libs

docs/libcurl/symbols-in-versions

@@ -45,6 +45,8 @@ CURLE_COULDNT_RESOLVE_PROXY     7.1
 CURLE_FAILED_INIT               7.1
 CURLE_FILESIZE_EXCEEDED         7.10.8
 CURLE_FILE_COULDNT_READ_FILE    7.1
+CURLE_FTP_ACCEPT_FAILED         7.24.0
+CURLE_FTP_ACCEPT_TIMEOUT        7.24.0
 CURLE_FTP_ACCESS_DENIED         7.1
 CURLE_FTP_BAD_DOWNLOAD_RESUME   7.1           7.1
 CURLE_FTP_BAD_FILE_LIST         7.21.0
@@ -286,6 +288,7 @@ CURLOPTTYPE_FUNCTIONPOINT       7.1
 CURLOPTTYPE_LONG                7.1
 CURLOPTTYPE_OBJECTPOINT         7.1
 CURLOPTTYPE_OFF_T               7.11.0
+CURLOPT_ACCEPTTIMEOUT_MS        7.24.0
 CURLOPT_ACCEPT_ENCODING         7.21.6
 CURLOPT_ADDRESS_SCOPE           7.19.0
 CURLOPT_APPEND                  7.17.0
@@ -320,6 +323,7 @@ CURLOPT_DEBUGDATA               7.9.6
 CURLOPT_DEBUGFUNCTION           7.9.6
 CURLOPT_DIRLISTONLY             7.17.0
 CURLOPT_DNS_CACHE_TIMEOUT       7.9.3
+CURLOPT_DNS_SERVERS             7.24.0
 CURLOPT_DNS_USE_GLOBAL_CACHE    7.9.3         7.11.1
 CURLOPT_EGDSOCKET               7.7
 CURLOPT_ENCODING                7.10
@@ -380,6 +384,7 @@ CURLOPT_LOCALPORT               7.15.2
 CURLOPT_LOCALPORTRANGE          7.15.2
 CURLOPT_LOW_SPEED_LIMIT         7.1
 CURLOPT_LOW_SPEED_TIME          7.1
+CURLOPT_MAIL_AUTH               7.25.0
 CURLOPT_MAIL_FROM               7.20.0
 CURLOPT_MAIL_RCPT               7.20.0
 CURLOPT_MAXCONNECTS             7.7
@@ -403,7 +408,7 @@ CURLOPT_OPENSOCKETFUNCTION      7.17.1
 CURLOPT_PASSWDDATA              7.4.2         7.11.1      7.15.5
 CURLOPT_PASSWDFUNCTION          7.4.2         7.11.1      7.15.5
 CURLOPT_PASSWORD                7.19.1
-CURLOPT_PASV_HOST               7.12.1        7.15.6      7.15.5
+CURLOPT_PASV_HOST               7.12.1        7.16.0      7.15.5
 CURLOPT_PORT                    7.1
 CURLOPT_POST                    7.1
 CURLOPT_POST301                 7.17.1        7.19.1
@@ -478,10 +483,14 @@ CURLOPT_SSLVERSION              7.1
 CURLOPT_SSL_CIPHER_LIST         7.9
 CURLOPT_SSL_CTX_DATA            7.10.6
 CURLOPT_SSL_CTX_FUNCTION        7.10.6
+CURLOPT_SSL_OPTIONS             7.25.0
 CURLOPT_SSL_SESSIONID_CACHE     7.16.0
 CURLOPT_SSL_VERIFYHOST          7.8.1
 CURLOPT_SSL_VERIFYPEER          7.4.2
 CURLOPT_STDERR                  7.1
+CURLOPT_TCP_KEEPALIVE           7.25.0
+CURLOPT_TCP_KEEPIDLE            7.25.0
+CURLOPT_TCP_KEEPINTVL           7.25.0
 CURLOPT_TCP_NODELAY             7.11.2
 CURLOPT_TELNETOPTIONS           7.7
 CURLOPT_TFTP_BLKSIZE            7.19.4
@@ -550,6 +559,7 @@ CURLSHE_BAD_OPTION              7.10.3
 CURLSHE_INVALID                 7.10.3
 CURLSHE_IN_USE                  7.10.3
 CURLSHE_NOMEM                   7.12.0
+CURLSHE_NOT_BUILT_IN            7.23.0
 CURLSHE_OK                      7.10.3
 CURLSHOPT_LOCKFUNC              7.10.3
 CURLSHOPT_NONE                  7.10.3
@@ -557,7 +567,7 @@ CURLSHOPT_SHARE                 7.10.3
 CURLSHOPT_UNLOCKFUNC            7.10.3
 CURLSHOPT_UNSHARE               7.10.3
 CURLSHOPT_USERDATA              7.10.3
-CURLSOCKTYPE_IPCXN              7.15.6
+CURLSOCKTYPE_IPCXN              7.16.0
 CURLSSH_AUTH_ANY                7.16.1
 CURLSSH_AUTH_DEFAULT            7.16.1
 CURLSSH_AUTH_HOST               7.16.1
@@ -565,6 +575,7 @@ CURLSSH_AUTH_KEYBOARD           7.16.1
 CURLSSH_AUTH_NONE               7.16.1
 CURLSSH_AUTH_PASSWORD           7.16.1
 CURLSSH_AUTH_PUBLICKEY          7.16.1
+CURLSSLOPT_ALLOW_BEAST          7.25.0
 CURLUSESSL_ALL                  7.17.0
 CURLUSESSL_CONTROL              7.17.0
 CURLUSESSL_NONE                 7.17.0
@@ -638,6 +649,7 @@ CURL_READFUNC_PAUSE             7.18.0
 CURL_REDIR_GET_ALL              7.19.1
 CURL_REDIR_POST_301             7.19.1
 CURL_REDIR_POST_302             7.19.1
+CURL_REDIR_POST_303             7.25.1
 CURL_REDIR_POST_ALL             7.19.1
 CURL_RTSPREQ_ANNOUNCE           7.20.0
 CURL_RTSPREQ_DESCRIBE           7.20.0

docs/libcurl/symbols.pl

@@ -0,0 +1,100 @@
+#!/usr/bin/perl
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
+#
+# Experience has shown that the symbols-in-versions file is very useful to
+# applications that want to build with a wide range of libcurl versions.
+# It is however easy to get it wrong and the source gets a bit messy with all
+# the fixed numerical comparisions.
+#
+# The point of this script is to provide an easy-to-use macro for libcurl-
+# using applications to do preprocessor checks for specific libcurl defines,
+# and yet make the code clearly show what the macro is used for.
+#
+# Run this script and generate libcurl-symbols.h and then use that header in
+# a fashion similar to:
+#
+# #include "libcurl-symbols.h"
+#
+# #if LIBCURL_HAS(CURLOPT_MUTE)
+#   has mute
+# #else
+#   no mute
+# #endif
+#
+#
+open F, "<symbols-in-versions";
+
+sub str2num {
+    my ($str)=@_;
+    if($str =~ /([0-9]*)\.([0-9]*)\.*([0-9]*)/) {
+        return sprintf("0x%06x", $1<<16 | $2 << 8 | $3);
+    }
+}
+
+print <<EOS
+
+#include <curl/curl.h>
+
+#define LIBCURL_HAS(x) \\
+  (defined(x ## _FIRST) && (x ## _FIRST <= LIBCURL_VERSION_NUM) && \\
+   (!defined(x ## _LAST) || ( x ## _LAST >= LIBCURL_VERSION_NUM)))
+
+EOS
+    ;
+
+while(<F>) {
+    if(/^(CURL[^ ]*)[ \t]*(.*)/) {
+        my ($sym, $vers)=($1, $2);
+
+        my $intr;
+        my $rm;
+        my $dep;
+
+        # is there removed info?
+        if($vers =~ /([\d.]+)[ \t-]+([\d.]+)[ \t]+([\d.]+)/) {
+            ($intr, $dep, $rm)=($1, $2, $3);
+        }
+        # is it a dep-only line?
+        elsif($vers =~ /([\d.]+)[ \t-]+([\d.]+)/) {
+            ($intr, $dep)=($1, $2);
+        }
+        else {
+            $intr = $vers;
+        }
+
+        my $inum = str2num($intr);
+
+        print <<EOS
+#define ${sym}_FIRST $inum /* Added in $intr */
+EOS
+;
+        my $irm = str2num($rm);
+        if($rm) {
+        print <<EOS
+#define ${sym}_LAST $irm /* Last featured in $rm */
+EOS
+;
+        }
+
+    }
+}

docs/mk-ca-bundle.1

@@ -0,0 +1,51 @@
+.Dd April 27, 2012
+.Dt MK-CA-BUNDLE 1
+.Os
+.Sh NAME
+.Nm mk-ca-bundle
+.Nd create a new ca-bundle.crt from mozilla's certdata.txt
+.Sh SYNOPSIS
+.Nm
+.Op Fl bilnqtuv
+.Or outputfile
+.Sh DESCRIPTION
+The
+.Nm
+tool downloads the certdata.txt file from Mozilla's source tree, then
+parses certdata.txt and extracts CA Root Certificates into PEM format.
+These are then processed with the OpenSSL commandline tool to produce the
+final ca-bundle.crt file.
+.Sh OPTIONS
+The following options are supported by
+.Nm :
+.Bl -tag -width _h
+.It Fl b
+backup an existing version of ca-bundle.crt
+.It Fl i
+print version info about used modules
+.It Fl l
+print license info about certdata.txt
+.It Fl n
+no download of certdata.txt (to use existing)
+.It Fl q
+be really quiet (no progress output at all)
+.It Fl t
+include plain text listing of certificates
+.It Fl u
+unlink (remove) certdata.txt after processing
+.It Fl v
+be verbose and print out processed CAs
+.El
+.Sh EXIT STATUS
+.Ex -std
+.Sh SEE ALSO
+.Xr curl 1
+.Sh HISTORY
+.Nm
+was based on the parse-certs script written by
+.An Roland Krikava
+and hacked by
+.An Guenter Knauf .
+This manual page was written by
+.An Jan Schaumann
+.Aq jschauma@netmeister.org .

include/curl/.gitignore

@@ -1,3 +1,4 @@
 curlbuild.h
+stamp-h2
 stamp-h3
 curlver.h.dist

include/curl/curl.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -69,7 +69,7 @@
    require it! */
 #if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \
     defined(__minix) || defined(__SYMBIAN32__) || defined(__INTEGRITY) || \
-    defined(ANDROID) || \
+    defined(ANDROID) || defined(__ANDROID__) || \
    (defined(__FreeBSD_version) && (__FreeBSD_version < 800000))
 #include <sys/select.h>
 #endif
@@ -187,10 +187,10 @@ typedef int (*curl_progress_callback)(void *clientp,
 #define CURL_MAX_HTTP_HEADER (100*1024)
 #endif
 
-
 /* This is a magic return code for the write callback that, when returned,
    will signal libcurl to pause receiving on the current transfer. */
 #define CURL_WRITEFUNC_PAUSE 0x10000001
+
 typedef size_t (*curl_write_callback)(char *buffer,
                                       size_t size,
                                       size_t nitems,
@@ -411,9 +411,12 @@ typedef enum {
   CURLE_REMOTE_ACCESS_DENIED,    /* 9 a service was denied by the server
                                     due to lack of access - when login fails
                                     this is not returned. */
-  CURLE_OBSOLETE10,              /* 10 - NOT USED */
+  CURLE_FTP_ACCEPT_FAILED,       /* 10 - [was obsoleted in April 2006 for
+                                    7.15.4, reused in Dec 2011 for 7.24.0]*/
   CURLE_FTP_WEIRD_PASS_REPLY,    /* 11 */
-  CURLE_OBSOLETE12,              /* 12 - NOT USED */
+  CURLE_FTP_ACCEPT_TIMEOUT,      /* 12 - timeout occurred accepting server
+                                    [was obsoleted in August 2007 for 7.17.0,
+                                    reused in Dec 2011 for 7.24.0]*/
   CURLE_FTP_WEIRD_PASV_REPLY,    /* 13 */
   CURLE_FTP_WEIRD_227_FORMAT,    /* 14 */
   CURLE_FTP_CANT_GET_HOST,       /* 15 */
@@ -511,13 +514,16 @@ typedef enum {
   CURLE_RTSP_SESSION_ERROR,      /* 86 - mismatch of RTSP Session Ids */
   CURLE_FTP_BAD_FILE_LIST,       /* 87 - unable to parse FTP file list */
   CURLE_CHUNK_FAILED,            /* 88 - chunk callback reported error */
-
   CURL_LAST /* never use! */
 } CURLcode;
 
 #ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
                           the obsolete stuff removed! */
 
+/* Previously obsoletes error codes re-used in 7.24.0 */
+#define CURLE_OBSOLETE10 CURLE_FTP_ACCEPT_FAILED
+#define CURLE_OBSOLETE12 CURLE_FTP_ACCEPT_TIMEOUT
+
 /*  compatibility with older names */
 #define CURLOPT_ENCODING CURLOPT_ACCEPT_ENCODING
 
@@ -592,18 +598,32 @@ typedef enum {
                                    in 7.18.0 */
 } curl_proxytype;  /* this enum was added in 7.10 */
 
-#define CURLAUTH_NONE         0       /* nothing */
-#define CURLAUTH_BASIC        (1<<0)  /* Basic (default) */
-#define CURLAUTH_DIGEST       (1<<1)  /* Digest */
-#define CURLAUTH_GSSNEGOTIATE (1<<2)  /* GSS-Negotiate */
-#define CURLAUTH_NTLM         (1<<3)  /* NTLM */
-#define CURLAUTH_DIGEST_IE    (1<<4)  /* Digest with IE flavour */
-#define CURLAUTH_NTLM_WB      (1<<5)  /* NTLM delegating to winbind helper */
-#define CURLAUTH_ONLY         (1<<31) /* used together with a single other
-                                         type to force no auth or just that
-                                         single type */
-#define CURLAUTH_ANY (~CURLAUTH_DIGEST_IE)  /* all fine types set */
-#define CURLAUTH_ANYSAFE (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE))
+/*
+ * Bitmasks for CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH options:
+ *
+ * CURLAUTH_NONE         - No HTTP authentication
+ * CURLAUTH_BASIC        - HTTP Basic authentication (default)
+ * CURLAUTH_DIGEST       - HTTP Digest authentication
+ * CURLAUTH_GSSNEGOTIATE - HTTP GSS-Negotiate authentication
+ * CURLAUTH_NTLM         - HTTP NTLM authentication
+ * CURLAUTH_DIGEST_IE    - HTTP Digest authentication with IE flavour
+ * CURLAUTH_NTLM_WB      - HTTP NTLM authentication delegated to winbind helper
+ * CURLAUTH_ONLY         - Use together with a single other type to force no
+ *                         authentication or just that single type
+ * CURLAUTH_ANY          - All fine types set
+ * CURLAUTH_ANYSAFE      - All fine types except Basic
+ */
+
+#define CURLAUTH_NONE         ((unsigned long)0)
+#define CURLAUTH_BASIC        (((unsigned long)1)<<0)
+#define CURLAUTH_DIGEST       (((unsigned long)1)<<1)
+#define CURLAUTH_GSSNEGOTIATE (((unsigned long)1)<<2)
+#define CURLAUTH_NTLM         (((unsigned long)1)<<3)
+#define CURLAUTH_DIGEST_IE    (((unsigned long)1)<<4)
+#define CURLAUTH_NTLM_WB      (((unsigned long)1)<<5)
+#define CURLAUTH_ONLY         (((unsigned long)1)<<31)
+#define CURLAUTH_ANY          (~CURLAUTH_DIGEST_IE)
+#define CURLAUTH_ANYSAFE      (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE))
 
 #define CURLSSH_AUTH_ANY       ~0     /* all types supported by the server */
 #define CURLSSH_AUTH_NONE      0      /* none allowed, silly but complete */
@@ -667,6 +687,15 @@ typedef enum {
   CURLUSESSL_LAST     /* not an option, never use */
 } curl_usessl;
 
+/* Definition of bits for the CURLOPT_SSL_OPTIONS argument: */
+
+/* - ALLOW_BEAST tells libcurl to allow the BEAST SSL vulnerability in the
+   name of improving interoperability with older servers. Some SSL libraries
+   have introduced work-arounds for this flaw but those work-arounds sometimes
+   make the SSL communication fail. To regain functionality with those broken
+   servers, a user can this way allow the vulnerability back. */
+#define CURLSSLOPT_ALLOW_BEAST (1<<0)
+
 #ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
                           the obsolete stuff removed! */
 
@@ -1486,6 +1515,26 @@ typedef enum {
   /* allow GSSAPI credential delegation */
   CINIT(GSSAPI_DELEGATION, LONG, 210),
 
+  /* Set the name servers to use for DNS resolution */
+  CINIT(DNS_SERVERS, OBJECTPOINT, 211),
+
+  /* Time-out accept operations (currently for FTP only) after this amount
+     of miliseconds. */
+  CINIT(ACCEPTTIMEOUT_MS, LONG, 212),
+
+  /* Set TCP keepalive */
+  CINIT(TCP_KEEPALIVE, LONG, 213),
+
+  /* non-universal keepalive knobs (Linux, AIX, HP-UX, more) */
+  CINIT(TCP_KEEPIDLE, LONG, 214),
+  CINIT(TCP_KEEPINTVL, LONG, 215),
+
+  /* Enable/disable specific SSL features with a bitmask, see CURLSSLOPT_* */
+  CINIT(SSL_OPTIONS, LONG, 216),
+
+  /* set the SMTP auth originator */
+  CINIT(MAIL_AUTH, OBJECTPOINT, 217),
+
   CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
@@ -1589,13 +1638,16 @@ enum CURL_TLSAUTH {
 };
 
 /* symbols to use with CURLOPT_POSTREDIR.
-   CURL_REDIR_POST_301 and CURL_REDIR_POST_302 can be bitwise ORed so that
-   CURL_REDIR_POST_301 | CURL_REDIR_POST_302 == CURL_REDIR_POST_ALL */
+   CURL_REDIR_POST_301, CURL_REDIR_POST_302 and CURL_REDIR_POST_303
+   can be bitwise ORed so that CURL_REDIR_POST_301 | CURL_REDIR_POST_302
+   | CURL_REDIR_POST_303 == CURL_REDIR_POST_ALL */
 
 #define CURL_REDIR_GET_ALL  0
 #define CURL_REDIR_POST_301 1
 #define CURL_REDIR_POST_302 2
-#define CURL_REDIR_POST_ALL (CURL_REDIR_POST_301|CURL_REDIR_POST_302)
+#define CURL_REDIR_POST_303 4
+#define CURL_REDIR_POST_ALL \
+    (CURL_REDIR_POST_301|CURL_REDIR_POST_302|CURL_REDIR_POST_303)
 
 typedef enum {
   CURL_TIMECOND_NONE,
@@ -2014,8 +2066,9 @@ typedef enum {
   CURLSHE_BAD_OPTION, /* 1 */
   CURLSHE_IN_USE,     /* 2 */
   CURLSHE_INVALID,    /* 3 */
-  CURLSHE_NOMEM,      /* out of memory */
-  CURLSHE_LAST /* never use */
+  CURLSHE_NOMEM,      /* 4 out of memory */
+  CURLSHE_NOT_BUILT_IN, /* 5 feature not present in lib */
+  CURLSHE_LAST        /* never use */
 } CURLSHcode;
 
 typedef enum {

include/curl/curlver.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -26,16 +26,16 @@
    a script at release-time. This was made its own header file in 7.11.2 */
 
 /* This is the global package copyright */
-#define LIBCURL_COPYRIGHT "1996 - 2011 Daniel Stenberg, <daniel@haxx.se>."
+#define LIBCURL_COPYRIGHT "1996 - 2012 Daniel Stenberg, <daniel@haxx.se>."
 
 /* This is the version number of the libcurl package from which this header
    file origins: */
-#define LIBCURL_VERSION "7.22.0-DEV"
+#define LIBCURL_VERSION "7.26.0-DEV"
 
 /* The numeric version number is also available "in parts" by using these
    defines: */
 #define LIBCURL_VERSION_MAJOR 7
-#define LIBCURL_VERSION_MINOR 22
+#define LIBCURL_VERSION_MINOR 26
 #define LIBCURL_VERSION_PATCH 0
 
 /* This is the numeric version of the libcurl version number, meant for easier
@@ -53,7 +53,7 @@
    and it is always a greater number in a more recent release. It makes
    comparisons with greater than and less than work.
 */
-#define LIBCURL_VERSION_NUM 0x071600
+#define LIBCURL_VERSION_NUM 0x071A00
 
 /*
  * This is the date and time when the full source package was created. The

include/curl/typecheck-gcc.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -141,8 +141,9 @@ __extension__ ({                                                              \
 
 /* To define a new warning, use _CURL_WARNING(identifier, "message") */
 #define _CURL_WARNING(id, message)                                            \
-  static void __attribute__((warning(message))) __attribute__((unused))       \
-  __attribute__((noinline)) id(void) { __asm__(""); }
+  static void __attribute__((__warning__(message)))                           \
+  __attribute__((__unused__)) __attribute__((__noinline__))                   \
+  id(void) { __asm__(""); }
 
 _CURL_WARNING(_curl_easy_setopt_err_long,
   "curl_easy_setopt expects a long argument for this option")
@@ -392,7 +393,8 @@ _CURL_WARNING(_curl_easy_getinfo_err_curl_slist,
 /* evaluates to true if expr is abuffer suitable for CURLOPT_ERRORBUFFER */
 /* XXX: also check size of an char[] array? */
 #define _curl_is_error_buffer(expr)                                           \
-  (__builtin_types_compatible_p(__typeof__(expr), char *) ||                  \
+  (_curl_is_NULL(expr) ||                                                     \
+   __builtin_types_compatible_p(__typeof__(expr), char *) ||                  \
    __builtin_types_compatible_p(__typeof__(expr), char[]))
 
 /* evaluates to true if expr is of type (const) void* or (const) FILE* */
@@ -521,7 +523,11 @@ typedef int (_curl_progress_callback2)(const void *,
    _curl_callback_compatible((expr), _curl_debug_callback1) ||                \
    _curl_callback_compatible((expr), _curl_debug_callback2) ||                \
    _curl_callback_compatible((expr), _curl_debug_callback3) ||                \
-   _curl_callback_compatible((expr), _curl_debug_callback4))
+   _curl_callback_compatible((expr), _curl_debug_callback4) ||                \
+   _curl_callback_compatible((expr), _curl_debug_callback5) ||                \
+   _curl_callback_compatible((expr), _curl_debug_callback6) ||                \
+   _curl_callback_compatible((expr), _curl_debug_callback7) ||                \
+   _curl_callback_compatible((expr), _curl_debug_callback8))
 typedef int (_curl_debug_callback1) (CURL *,
     curl_infotype, char *, size_t, void *);
 typedef int (_curl_debug_callback2) (CURL *,
@@ -530,6 +536,14 @@ typedef int (_curl_debug_callback3) (CURL *,
     curl_infotype, const char *, size_t, void *);
 typedef int (_curl_debug_callback4) (CURL *,
     curl_infotype, const char *, size_t, const void *);
+typedef int (_curl_debug_callback5) (CURL *,
+    curl_infotype, unsigned char *, size_t, void *);
+typedef int (_curl_debug_callback6) (CURL *,
+    curl_infotype, unsigned char *, size_t, const void *);
+typedef int (_curl_debug_callback7) (CURL *,
+    curl_infotype, const unsigned char *, size_t, void *);
+typedef int (_curl_debug_callback8) (CURL *,
+    curl_infotype, const unsigned char *, size_t, const void *);
 
 /* evaluates to true if expr is of type curl_ssl_ctx_callback or "similar" */
 /* this is getting even messier... */

lib/.gitignore

@@ -10,3 +10,4 @@ libcurl.plist.dist
 libcurl.vcproj
 vc6libcurl.dsp
 Makefile.vc10.dist
+libcurl.vers

lib/Makefile.Watcom

@@ -83,13 +83,13 @@ CFLAGS += -dWANT_IDN_PROTOTYPES
 !ifdef %zlib_root
 ZLIB_ROOT = $(%zlib_root)
 !else
-ZLIB_ROOT = ..$(DS)..$(DS)zlib-1.2.5
+ZLIB_ROOT = ..$(DS)..$(DS)zlib-1.2.7
 !endif
 
 !ifdef %libssh2_root
 LIBSSH2_ROOT = $(%libssh2_root)
 !else
-LIBSSH2_ROOT = ..$(DS)..$(DS)libssh2-1.3.0
+LIBSSH2_ROOT = ..$(DS)..$(DS)libssh2-1.4.2
 !endif
 
 !ifdef %librtmp_root
@@ -101,7 +101,7 @@ LIBRTMP_ROOT = ..$(DS)..$(DS)rtmpdump-2.3
 !ifdef %openssl_root
 OPENSSL_ROOT = $(%openssl_root)
 !else
-OPENSSL_ROOT = ..$(DS)..$(DS)openssl-0.9.8r
+OPENSSL_ROOT = ..$(DS)..$(DS)openssl-0.9.8x
 !endif
 
 !ifdef %ares_root

lib/Makefile.am

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -33,7 +33,7 @@ CMAKE_DIST = CMakeLists.txt curl_config.h.cmake
 EXTRA_DIST = Makefile.b32 Makefile.m32 Makefile.vc6 $(DSP)                 \
  vc6libcurl.dsw config-win32.h config-win32ce.h config-riscos.h            \
  config-mac.h curl_config.h.in makefile.dj config-dos.h libcurl.plist      \
- libcurl.rc config-amigaos.h amigaos.c amigaos.h makefile.amiga		   \
+ libcurl.rc config-amigaos.h makefile.amiga                                \
  Makefile.netware nwlib.c nwos.c libcurl.imp msvcproj.head msvcproj.foot   \
  config-win32ce.h config-os400.h setup-os400.h config-symbian.h		   \
  Makefile.Watcom config-tpf.h $(DOCS) $(VCPROJ) mk-ca-bundle.pl		   \
@@ -48,6 +48,8 @@ LIBCURL_LIBS = @LIBCURL_LIBS@
 # This might hold -Werror
 CFLAGS += @CURL_CFLAG_EXTRAS@
 
+CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
+
 # Specify our include paths here, and do it relative to $(top_srcdir) and
 # $(top_builddir), to ensure that these paths which belong to the library
 # being currently built and tested are searched before the library which
@@ -77,6 +79,18 @@ INCLUDES = -I$(top_builddir)/include/curl \
            -I$(top_srcdir)/lib
 endif
 
+AM_CPPFLAGS =
+
+# Mostly for Windows build targets, when building libcurl library
+if USE_CPPFLAG_BUILDING_LIBCURL
+AM_CPPFLAGS += -DBUILDING_LIBCURL
+endif
+
+# Mostly for Windows build targets, when building static libcurl
+if USE_CPPFLAG_CURL_STATICLIB
+AM_CPPFLAGS += -DCURL_STATICLIB
+endif
+
 if SONAME_BUMP
 #
 # Bumping of SONAME conditionally may seem like a weird thing to do, and yeah
@@ -116,7 +130,19 @@ if MIMPURE
 MIMPURE = -mimpure-text
 endif
 
-libcurl_la_LDFLAGS = $(UNDEF) $(VERSIONINFO) $(MIMPURE) $(LIBCURL_LIBS)
+if VERSIONED_SYMBOLS
+VERSIONED_SYMBOLS = -Wl,--version-script=libcurl.vers
+endif
+
+libcurl_la_LDFLAGS = $(UNDEF) $(VERSIONINFO) $(MIMPURE) $(VERSIONED_SYMBOLS) $(LIBCURL_LIBS)
+
+if DOING_CURL_SYMBOL_HIDING
+libcurl_la_CPPFLAGS = $(AM_CPPFLAGS) -DCURL_HIDDEN_SYMBOLS
+libcurl_la_CFLAGS = $(AM_CFLAGS) $(CFLAG_CURL_SYMBOL_HIDING)
+else
+libcurl_la_CPPFLAGS = $(AM_CPPFLAGS)
+libcurl_la_CFLAGS = $(AM_CFLAGS)
+endif
 
 # unit testing static library built only along with unit tests
 if BUILD_UNITTESTS
@@ -127,6 +153,7 @@ endif
 
 libcurlu_la_CPPFLAGS = $(AM_CPPFLAGS) -DUNITTESTS
 libcurlu_la_LDFLAGS = -static $(LIBCURL_LIBS)
+libcurlu_la_CFLAGS = $(AM_CFLAGS)
 
 # Makefile.inc provides the CSOURCES and HHEADERS defines
 include Makefile.inc

lib/Makefile.b32

@@ -22,12 +22,12 @@ BCCDIR = $(MAKEDIR)\..
 
 # Edit the path below to point to the base of your Zlib sources.
 !ifndef ZLIB_PATH
-ZLIB_PATH = ..\..\zlib-1.2.5
+ZLIB_PATH = ..\..\zlib-1.2.7
 !endif
 
 # Edit the path below to point to the base of your OpenSSL package.
 !ifndef OPENSSL_PATH
-OPENSSL_PATH = ..\..\openssl-0.9.8q
+OPENSSL_PATH = ..\..\openssl-0.9.8x
 !endif
 
 # Set libcurl static lib, dll and import lib

lib/Makefile.inc

@@ -14,7 +14,7 @@ CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	\
   curl_fnmatch.c fileinfo.c ftplistparser.c wildcard.c krb5.c		\
   memdebug.c http_chunks.c strtok.c connect.c llist.c hash.c multi.c	\
   content_encoding.c share.c http_digest.c md4.c md5.c curl_rand.c	\
-  http_negotiate.c inet_pton.c strtoofft.c strerror.c			\
+  http_negotiate.c inet_pton.c strtoofft.c strerror.c amigaos.c		\
   hostasyn.c hostip4.c hostip6.c hostsyn.c inet_ntop.c parsedate.c	\
   select.c gtls.c sslgen.c tftp.c splay.c strdup.c socks.c ssh.c nss.c	\
   qssl.c rawstr.c curl_addrinfo.c socks_gssapi.c socks_sspi.c		\
@@ -31,7 +31,7 @@ HHEADERS = arpa_telnet.h netrc.h file.h timeval.h qssl.h hostip.h	\
   getinfo.h strequal.h krb4.h memdebug.h http_chunks.h curl_rand.h	\
   curl_fnmatch.h wildcard.h fileinfo.h ftplistparser.h strtok.h		\
   connect.h llist.h hash.h content_encoding.h share.h curl_md4.h	\
-  curl_md5.h http_digest.h http_negotiate.h inet_pton.h			\
+  curl_md5.h http_digest.h http_negotiate.h inet_pton.h amigaos.h	\
   strtoofft.h strerror.h inet_ntop.h curlx.h curl_memory.h setup.h	\
   transfer.h select.h easyif.h multiif.h parsedate.h sslgen.h gtls.h	\
   tftp.h sockaddr.h splay.h strdup.h setup_once.h socks.h ssh.h nssg.h	\

lib/Makefile.m32

@@ -1,30 +1,37 @@
-#########################################################################
+###########################################################################
 #
-## Makefile for building libcurl.a with MingW32 (GCC-3.2 or later)
-## and optionally OpenSSL (0.9.8), libssh2 (1.2), zlib (1.2.5), librtmp (2.3)
+## Makefile for building libcurl.a with MingW (GCC-3.2 or later)
+## and optionally OpenSSL (0.9.8), libssh2 (1.3), zlib (1.2.5), librtmp (2.3)
 ##
 ## Usage:   mingw32-make -f Makefile.m32 CFG=-feature1[-feature2][-feature3][...]
 ## Example: mingw32-make -f Makefile.m32 CFG=-zlib-ssl-sspi-winidn
 ##
 ## Hint: you can also set environment vars to control the build, f.e.:
-## set ZLIB_PATH=c:/zlib-1.2.5
+## set ZLIB_PATH=c:/zlib-1.2.7
 ## set ZLIB=1
-##
-## Comments to: Troy Engel <tengel@sonic.net> or
-##              Joern Hartroth <hartroth@acm.org>
-#########################################################################
+#
+###########################################################################
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../zlib-1.2.5
+ZLIB_PATH = ../../zlib-1.2.7
 endif
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.8r
+OPENSSL_PATH = ../../openssl-0.9.8x
+endif
+ifndef OPENSSL_INCLUDE
+OPENSSL_INCLUDE = $(OPENSSL_PATH)/outinc
+endif
+ifndef OPENSSL_LIBPATH
+OPENSSL_LIBPATH = $(OPENSSL_PATH)/out
+endif
+ifndef OPENSSL_LIBS
+OPENSSL_LIBS = -leay32 -lssl32
 endif
 # Edit the path below to point to the base of your LibSSH2 package.
 ifndef LIBSSH2_PATH
-LIBSSH2_PATH = ../../libssh2-1.3.0
+LIBSSH2_PATH = ../../libssh2-1.4.2
 endif
 # Edit the path below to point to the base of your librtmp package.
 ifndef LIBRTMP_PATH
@@ -34,7 +41,7 @@ endif
 ifndef LIBIDN_PATH
 LIBIDN_PATH = ../../libidn-1.18
 endif
-# Edit the path below to point to the base of your MS idndlpackage. 
+# Edit the path below to point to the base of your MS IDN package.
 # Microsoft Internationalized Domain Names (IDN) Mitigation APIs 1.1
 # http://www.microsoft.com/downloads/en/details.aspx?FamilyID=ad6158d7-ddba-416a-9109-07607425a815
 ifndef WINIDN_PATH
@@ -45,9 +52,11 @@ ifndef LDAP_SDK
 LDAP_SDK = c:/novell/ndk/cldapsdk/win32
 endif
 
+PROOT = ..
+
 # Edit the path below to point to the base of your c-ares package.
 ifndef LIBCARES_PATH
-LIBCARES_PATH = ../ares
+LIBCARES_PATH = $(PROOT)/ares
 endif
 
 # Edit the var below to set to your architecture or set environment var.
@@ -57,6 +66,7 @@ endif
 
 CC = gcc
 CFLAGS = -g -O2 -Wall
+CFLAGS += -fno-strict-aliasing
 ifeq ($(ARCH),w64)
 CFLAGS += -D_AMD64_
 endif
@@ -65,10 +75,12 @@ LDFLAGS = -s
 AR = ar
 RANLIB = ranlib
 RC = windres
-RCFLAGS = --include-dir=../include -DDEBUGBUILD=0 -O COFF -i
-RM = del /q /f 2>NUL
+RCFLAGS = --include-dir=$(PROOT)/include -DDEBUGBUILD=0 -O COFF -i
 STRIP = strip -g
 
+RM = del /q /f 2>NUL
+CP = copy
+
 ########################################################
 ## Nothing more to do below this line!
 
@@ -115,10 +127,11 @@ endif
 
 INCLUDES = -I. -I../include
 CFLAGS += -DBUILDING_LIBCURL
+
 ifdef ARES
-  INCLUDES += -I$(LIBCARES_PATH)
+  INCLUDES += -I"$(LIBCARES_PATH)"
   CFLAGS += -DUSE_ARES
-  DLL_LIBS += -L$(LIBCARES_PATH) -lcares
+  DLL_LIBS += -L"$(LIBCARES_PATH)" -lcares
   libcurl_dll_DEPENDENCIES = $(LIBCARES_PATH)/libcares.a
 endif
 ifdef RTMP
@@ -129,24 +142,24 @@ endif
 ifdef SSH2
   INCLUDES += -I"$(LIBSSH2_PATH)/include" -I"$(LIBSSH2_PATH)/win32"
   CFLAGS += -DUSE_LIBSSH2 -DHAVE_LIBSSH2_H
-  DLL_LIBS += -L$(LIBSSH2_PATH)/win32 -lssh2
+  DLL_LIBS += -L"$(LIBSSH2_PATH)/win32" -lssh2
 endif
 ifdef SSL
-  INCLUDES += -I"$(OPENSSL_PATH)/outinc" -I"$(OPENSSL_PATH)/outinc/openssl"
+  INCLUDES += -I"$(OPENSSL_INCLUDE)"
   CFLAGS += -DUSE_SSLEAY -DUSE_OPENSSL -DHAVE_OPENSSL_ENGINE_H -DHAVE_OPENSSL_PKCS12_H \
             -DHAVE_ENGINE_LOAD_BUILTIN_ENGINES -DOPENSSL_NO_KRB5 \
             -DCURL_WANTS_CA_BUNDLE_ENV
-  DLL_LIBS += -L$(OPENSSL_PATH)/out -leay32 -lssl32
+  DLL_LIBS += -L"$(OPENSSL_LIBPATH)" $(OPENSSL_LIBS)
 endif
 ifdef ZLIB
   INCLUDES += -I"$(ZLIB_PATH)"
   CFLAGS += -DHAVE_LIBZ -DHAVE_ZLIB_H
-  DLL_LIBS += -L$(ZLIB_PATH) -lz
+  DLL_LIBS += -L"$(ZLIB_PATH)" -lz
 endif
 ifdef IDN
   INCLUDES += -I"$(LIBIDN_PATH)/include"
   CFLAGS += -DUSE_LIBIDN
-  DLL_LIBS += -L$(LIBIDN_PATH)/lib -lidn
+  DLL_LIBS += -L"$(LIBIDN_PATH)/lib" -lidn
 else
 ifdef WINIDN
   CFLAGS += -DUSE_WIN32_IDN
@@ -161,7 +174,7 @@ ifdef SPNEGO
   CFLAGS += -DHAVE_SPNEGO
 endif
 ifdef IPV6
-  CFLAGS += -DENABLE_IPV6
+  CFLAGS += -DENABLE_IPV6 -D_WIN32_WINNT=0x0501
 endif
 ifdef LDAPS
   CFLAGS += -DHAVE_LDAP_SSL
@@ -178,11 +191,10 @@ ifdef USE_LDAP_OPENLDAP
 endif
 ifndef USE_LDAP_NOVELL
 ifndef USE_LDAP_OPENLDAP
-DLL_LIBS += -lwldap32
+  DLL_LIBS += -lwldap32
 endif
 endif
 DLL_LIBS += -lws2_32
-COMPILE = $(CC) $(INCLUDES) $(CFLAGS)
 
 # Makefile.inc provides the CSOURCES and HHEADERS defines
 include Makefile.inc
@@ -196,7 +208,6 @@ libcurl_a_DEPENDENCIES := $(strip $(CSOURCES) $(HHEADERS))
 
 RESOURCE = libcurl.res
 
-.SUFFIXES: .rc .res
 
 all: $(libcurl_a_LIBRARY) $(libcurl_dll_LIBRARY)
 
@@ -213,20 +224,25 @@ $(libcurl_dll_LIBRARY): $(libcurl_a_OBJECTS) $(RESOURCE) $(libcurl_dll_DEPENDENC
 	$(CC) $(LDFLAGS) -shared -Wl,--out-implib,$(libcurl_dll_a_LIBRARY) \
 	  -o $@ $(libcurl_a_OBJECTS) $(RESOURCE) $(DLL_LIBS)
 
-.c.o:
-	$(COMPILE) -c $<
+%.o: %.c $(PROOT)/include/curl/curlbuild.h
+	$(CC) $(INCLUDES) $(CFLAGS) -c $<
 
-.rc.res:
+%.res: %.rc
 	$(RC) $(RCFLAGS) $< -o $@
 
 clean:
+ifeq "$(wildcard $(PROOT)/include/curl/curlbuild.h.dist)" "$(PROOT)/include/curl/curlbuild.h.dist"
+	-$(RM) $(subst /,\,$(PROOT)/include/curl/curlbuild.h)
+endif
 	-$(RM) $(libcurl_a_OBJECTS) $(RESOURCE)
 
 distclean vclean: clean
 	-$(RM) $(libcurl_a_LIBRARY) $(libcurl_dll_LIBRARY) $(libcurl_dll_a_LIBRARY)
 
-FORCE: ;
-
 $(LIBCARES_PATH)/libcares.a:
 	$(MAKE) -C $(LIBCARES_PATH) -f Makefile.m32
 
+$(PROOT)/include/curl/curlbuild.h:
+	@echo Creating $@
+	@$(CP) $(subst /,\,$@).dist $(subst /,\,$@)
+

lib/Makefile.netware

@@ -14,17 +14,17 @@ endif
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../zlib-1.2.5
+ZLIB_PATH = ../../zlib-1.2.7
 endif
 
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.8r
+OPENSSL_PATH = ../../openssl-0.9.8x
 endif
 
 # Edit the path below to point to the base of your LibSSH2 package.
 ifndef LIBSSH2_PATH
-LIBSSH2_PATH = ../../libssh2-1.3.0
+LIBSSH2_PATH = ../../libssh2-1.4.2
 endif
 
 # Edit the path below to point to the base of your axTLS package.
@@ -42,6 +42,11 @@ ifndef LIBRTMP_PATH
 LIBRTMP_PATH = ../../librtmp-2.3
 endif
 
+# Edit the path below to point to the base of your fbopenssl package.
+ifndef FBOPENSSL_PATH
+FBOPENSSL_PATH = ../../fbopenssl-0.4
+endif
+
 # Edit the path below to point to the base of your c-ares package.
 ifndef LIBCARES_PATH
 LIBCARES_PATH = ../ares
@@ -181,6 +186,43 @@ CURL_LIB = ../lib
 
 INCLUDES = -I$(CURL_INC) -I$(CURL_LIB)
 
+ifeq ($(findstring -static,$(CFG)),-static)
+LINK_STATIC = 1
+endif
+ifeq ($(findstring -ares,$(CFG)),-ares)
+WITH_ARES = 1
+endif
+ifeq ($(findstring -rtmp,$(CFG)),-rtmp)
+WITH_RTMP = 1
+WITH_SSL = 1
+WITH_ZLIB = 1
+endif
+ifeq ($(findstring -ssh2,$(CFG)),-ssh2)
+WITH_SSH2 = 1
+WITH_SSL = 1
+WITH_ZLIB = 1
+endif
+ifeq ($(findstring -axtls,$(CFG)),-axtls)
+WITH_AXTLS = 1
+WITH_SSL =
+else
+ifeq ($(findstring -ssl,$(CFG)),-ssl)
+WITH_SSL = 1
+endif
+endif
+ifeq ($(findstring -zlib,$(CFG)),-zlib)
+WITH_ZLIB = 1
+endif
+ifeq ($(findstring -idn,$(CFG)),-idn)
+WITH_IDN = 1
+endif
+ifeq ($(findstring -spnego,$(CFG)),-spnego)
+WITH_SPNEGO = 1
+endif
+ifeq ($(findstring -ipv6,$(CFG)),-ipv6)
+ENABLE_IPV6 = 1
+endif
+
 ifdef WITH_ARES
 	INCLUDES += -I$(LIBCARES_PATH)
 	LDLIBS += $(LIBCARES_PATH)/libcares.$(LIBEXT)
@@ -204,6 +246,10 @@ ifdef WITH_SSL
 	LDLIBS += $(OPENSSL_PATH)/out_nw_$(LIBARCH_L)/crypto.$(LIBEXT)
 	IMPORTS += GetProcessSwitchCount RunningProcess
 	INSTDEP += ca-bundle.crt
+ifdef WITH_SPNEGO
+	INCLUDES += -I$(FBOPENSSL_PATH)/include
+	LDLIBS += $(FBOPENSSL_PATH)/nw/fbopenssl.$(LIBEXT)
+endif
 else
 ifdef WITH_AXTLS
 	INCLUDES += -I$(AXTLS_PATH)/inc
@@ -584,6 +630,9 @@ ifdef WITH_SSL
 	@echo $(DL)#define HAVE_LIBSSL 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LIBCRYPTO 1$(DL) >> $@
 	@echo $(DL)#define OPENSSL_NO_KRB5 1$(DL) >> $@
+ifdef WITH_SPNEGO
+	@echo $(DL)#define HAVE_SPNEGO 1$(DL) >> $@
+endif
 else
 ifdef WITH_AXTLS
 	@echo $(DL)#define USE_AXTLS 1$(DL) >> $@

lib/Makefile.vc6

@@ -65,15 +65,15 @@
 !INCLUDE ..\Makefile.msvc.names
 
 !IFNDEF OPENSSL_PATH
-OPENSSL_PATH   = ../../openssl-0.9.8r
+OPENSSL_PATH   = ../../openssl-0.9.8x
 !ENDIF
 
 !IFNDEF LIBSSH2_PATH
-LIBSSH2_PATH   = ../../libssh2-1.2.8
+LIBSSH2_PATH   = ../../libssh2-1.4.2
 !ENDIF
 
 !IFNDEF ZLIB_PATH
-ZLIB_PATH  = ../../zlib-1.2.5
+ZLIB_PATH  = ../../zlib-1.2.7
 !ENDIF
 
 !IFNDEF MACHINE

lib/Makefile.vxworks

@@ -33,10 +33,10 @@ BUILD_TYPE := debug
 USER_CFLAGS:=
 
 # directories where to seek for includes and libraries
-OPENSSL_INC := D:/libraries/openssl/openssl-0.9.8a-vxWorks6.3/include
-OPENSSL_LIB := D:/libraries/openssl/openssl-0.9.8a-vxWorks6.3
-ZLIB_INC    := D:/libraries/zlib/zlib-1.2.3-VxWorks6.3/zlib-1.2.3
-ZLIB_LIB    := D:/libraries/zlib/zlib-1.2.3-VxWorks6.3/binaries/vxworks_3.1_gnu/Debug/lib
+OPENSSL_INC := D:/libraries/openssl/openssl-0.9.8x-vxWorks6.3/include
+OPENSSL_LIB := D:/libraries/openssl/openssl-0.9.8x-vxWorks6.3
+ZLIB_INC    := D:/libraries/zlib/zlib-1.2.7-VxWorks6.3/zlib-1.2.7
+ZLIB_LIB    := D:/libraries/zlib/zlib-1.2.7-VxWorks6.3/binaries/vxworks_3.1_gnu/Debug/lib
 ARES_INC    :=
 ARES_LIB    :=
 

lib/amigaos.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -20,10 +20,13 @@
  *
  ***************************************************************************/
 
-#ifdef __AMIGA__ /* Any AmigaOS flavour */
+#include "setup.h"
+
+#if defined(__AMIGA__) && !defined(__ixemul__)
+
+#include <amitcp/socketbasetags.h>
 
 #include "amigaos.h"
-#include <amitcp/socketbasetags.h>
 
 struct Library *SocketBase = NULL;
 extern int errno, h_errno;
@@ -35,7 +38,7 @@ void __request(const char *msg);
 # define __request( msg )       Printf( msg "\n\a")
 #endif
 
-void amiga_cleanup()
+void Curl_amiga_cleanup()
 {
   if(SocketBase) {
     CloseLibrary(SocketBase);
@@ -43,7 +46,7 @@ void amiga_cleanup()
   }
 }
 
-BOOL amiga_init()
+bool Curl_amiga_init()
 {
   if(!SocketBase)
     SocketBase = OpenLibrary("bsdsocket.library", 4);
@@ -61,20 +64,14 @@ BOOL amiga_init()
   }
 
 #ifndef __libnix__
-  atexit(amiga_cleanup);
+  atexit(Curl_amiga_cleanup);
 #endif
 
   return TRUE;
 }
 
 #ifdef __libnix__
-ADD2EXIT(amiga_cleanup,-50);
+ADD2EXIT(Curl_amiga_cleanup,-50);
 #endif
 
-#else /* __AMIGA__ */
-
-#ifdef __POCC__
-#  pragma warn(disable:2024)  /* Disable warning #2024: Empty input file */
-#endif
-
-#endif /* __AMIGA__ */
+#endif /* __AMIGA__ && ! __ixemul__ */

lib/amigaos.h

@@ -1,5 +1,5 @@
-#ifndef LIBCURL_AMIGAOS_H
-#define LIBCURL_AMIGAOS_H
+#ifndef HEADER_CURL_AMIGAOS_H
+#define HEADER_CURL_AMIGAOS_H
 /***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2007, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -21,37 +21,19 @@
  * KIND, either express or implied.
  *
  ***************************************************************************/
+#include "setup.h"
 
-#ifdef __AMIGA__ /* Any AmigaOS flavour */
+#if defined(__AMIGA__) && !defined(__ixemul__)
 
-#ifndef __ixemul__
+bool Curl_amiga_init();
+void Curl_amiga_cleanup();
 
-#include <exec/types.h>
-#include <exec/execbase.h>
+#else
 
-#include <proto/exec.h>
-#include <proto/dos.h>
+#define Curl_amiga_init() 1
+#define Curl_amiga_cleanup() Curl_nop_stmt
 
-#include <sys/socket.h>
-
-#include "config-amigaos.h"
-
-#ifndef select
-# define select(args...) WaitSelect( args, NULL)
 #endif
-#ifndef ioctl
-# define ioctl(a,b,c,d)  IoctlSocket( (LONG)a, (ULONG)b, (char*)c)
-#endif
-#define _AMIGASF        1
 
-extern void amiga_cleanup();
-extern BOOL amiga_init();
-
-#else /* __ixemul__ */
-
-#warning compiling with ixemul...
-
-#endif /* __ixemul__ */
-#endif /* __AMIGA__ */
-#endif /* LIBCURL_AMIGAOS_H */
+#endif /* HEADER_CURL_AMIGAOS_H */
 

lib/arpa_telnet.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -26,9 +26,11 @@
  * Telnet option defines. Add more here if in need.
  */
 #define CURL_TELOPT_BINARY   0  /* binary 8bit data */
+#define CURL_TELOPT_ECHO     1  /* just echo! */
 #define CURL_TELOPT_SGA      3  /* Suppress Go Ahead */
 #define CURL_TELOPT_EXOPL  255  /* EXtended OPtions List */
 #define CURL_TELOPT_TTYPE   24  /* Terminal TYPE */
+#define CURL_TELOPT_NAWS    31  /* Negotiate About Window Size */
 #define CURL_TELOPT_XDISPLOC 35 /* X DISPlay LOCation */
 
 #define CURL_TELOPT_NEW_ENVIRON 39  /* NEW ENVIRONment variables */

lib/asyn-ares.c

@@ -227,18 +227,19 @@ int Curl_resolver_getsock(struct connectdata *conn,
   struct timeval maxtime;
   struct timeval timebuf;
   struct timeval *timeout;
+  long milli;
   int max = ares_getsock((ares_channel)conn->data->state.resolver,
                          (ares_socket_t *)socks, numsocks);
 
-
   maxtime.tv_sec = CURL_TIMEOUT_RESOLVE;
   maxtime.tv_usec = 0;
 
   timeout = ares_timeout((ares_channel)conn->data->state.resolver, &maxtime,
                          &timebuf);
-
-  Curl_expire(conn->data,
-              (timeout->tv_sec * 1000) + (timeout->tv_usec/1000));
+  milli = (timeout->tv_sec * 1000) + (timeout->tv_usec/1000);
+  if(milli == 0)
+    milli += 10;
+  Curl_expire(conn->data, milli);
 
   return max;
 }
@@ -330,9 +331,12 @@ CURLcode Curl_resolver_is_resolved(struct connectdata *conn,
     res->temp_ai = NULL;
     destroy_async_data(&conn->async);
     if(!conn->async.dns) {
-      failf(data, "Could not resolve host: %s (%s)", conn->host.dispname,
+      failf(data, "Could not resolve %s: %s (%s)",
+            conn->bits.proxy?"proxy":"host",
+            conn->host.dispname,
             ares_strerror(conn->async.status));
-      return CURLE_COULDNT_RESOLVE_HOST;
+      return conn->bits.proxy?CURLE_COULDNT_RESOLVE_PROXY:
+        CURLE_COULDNT_RESOLVE_HOST;
     }
     *dns = conn->async.dns;
   }
@@ -418,7 +422,7 @@ CURLcode Curl_resolver_wait_resolv(struct connectdata *conn,
   if(!conn->async.dns) {
     /* a name was not resolved */
     if((timeout < 0) || (conn->async.status == ARES_ETIMEOUT)) {
-      if(conn->bits.httpproxy) {
+      if(conn->bits.proxy) {
         failf(data, "Resolving proxy timed out: %s", conn->proxy.dispname);
         rc = CURLE_COULDNT_RESOLVE_PROXY;
       }
@@ -428,7 +432,7 @@ CURLcode Curl_resolver_wait_resolv(struct connectdata *conn,
       }
     }
     else if(conn->async.done) {
-      if(conn->bits.httpproxy) {
+      if(conn->bits.proxy) {
         failf(data, "Could not resolve proxy: %s (%s)", conn->proxy.dispname,
               ares_strerror(conn->async.status));
         rc = CURLE_COULDNT_RESOLVE_PROXY;
@@ -578,13 +582,22 @@ Curl_addrinfo *Curl_resolver_getaddrinfo(struct connectdata *conn,
     res->last_status = ARES_ENOTFOUND;
 #ifdef ENABLE_IPV6 /* CURLRES_IPV6 */
     if(family == PF_UNSPEC) {
-      res->num_pending = 2;
+      if(Curl_ipv6works()) {
+        res->num_pending = 2;
 
-      /* areschannel is already setup in the Curl_open() function */
-      ares_gethostbyname((ares_channel)data->state.resolver, hostname,
-                         PF_INET, query_completed_cb, conn);
-      ares_gethostbyname((ares_channel)data->state.resolver, hostname,
-                         PF_INET6, query_completed_cb, conn);
+        /* areschannel is already setup in the Curl_open() function */
+        ares_gethostbyname((ares_channel)data->state.resolver, hostname,
+                            PF_INET, query_completed_cb, conn);
+        ares_gethostbyname((ares_channel)data->state.resolver, hostname,
+                            PF_INET6, query_completed_cb, conn);
+      }
+      else {
+        res->num_pending = 1;
+
+        /* areschannel is already setup in the Curl_open() function */
+        ares_gethostbyname((ares_channel)data->state.resolver, hostname,
+                            PF_INET, query_completed_cb, conn);
+      }
     }
     else
 #endif /* CURLRES_IPV6 */
@@ -600,4 +613,31 @@ Curl_addrinfo *Curl_resolver_getaddrinfo(struct connectdata *conn,
   }
   return NULL; /* no struct yet */
 }
+
+CURLcode Curl_set_dns_servers(struct SessionHandle *data,
+                              char *servers)
+{
+  CURLcode result = CURLE_NOT_BUILT_IN;
+#if (ARES_VERSION >= 0x010704)
+  int ares_result = ares_set_servers_csv(data->state.resolver, servers);
+  switch(ares_result) {
+  case ARES_SUCCESS:
+    result = CURLE_OK;
+    break;
+  case ARES_ENOMEM:
+    result = CURLE_OUT_OF_MEMORY;
+    break;
+  case ARES_ENOTINITIALIZED:
+  case ARES_ENODATA:
+  case ARES_EBADSTR:
+  default:
+    result = CURLE_BAD_FUNCTION_ARGUMENT;
+    break;
+  }
+#else /* too old c-ares version! */
+  (void)data;
+  (void)servers;
+#endif
+  return result;
+}
 #endif /* CURLRES_ARES */

lib/asyn-thread.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -175,7 +175,6 @@ struct thread_sync_data {
 
 struct thread_data {
   curl_thread_t thread_hnd;
-  curl_socket_t dummy_sock;
   unsigned int poll_interval;
   int interval_end;
   struct thread_sync_data tsd;
@@ -329,9 +328,6 @@ static void destroy_async_data (struct Curl_async *async)
   if(async->os_specific) {
     struct thread_data *td = (struct thread_data*) async->os_specific;
 
-    if(td->dummy_sock != CURL_SOCKET_BAD)
-      sclose(td->dummy_sock);
-
     if(td->thread_hnd != curl_thread_t_null)
       Curl_thread_join(&td->thread_hnd);
 
@@ -364,7 +360,6 @@ static bool init_resolve_thread (struct connectdata *conn,
   conn->async.done = FALSE;
   conn->async.status = 0;
   conn->async.dns = NULL;
-  td->dummy_sock = CURL_SOCKET_BAD;
   td->thread_hnd = curl_thread_t_null;
 
   if(!init_thread_sync_data(&td->tsd, hostname, port, hints))
@@ -375,16 +370,6 @@ static bool init_resolve_thread (struct connectdata *conn,
   if(!conn->async.hostname)
     goto err_exit;
 
-#ifdef WIN32
-  /* This socket is only to keep Curl_resolver_fdset() and select() happy;
-   * should never become signalled for read since it's unbound but
-   * Windows needs at least 1 socket in select().
-   */
-  td->dummy_sock = socket(AF_INET, SOCK_DGRAM, 0);
-  if(td->dummy_sock == CURL_SOCKET_BAD)
-    goto err_exit;
-#endif
-
 #ifdef HAVE_GETADDRINFO
   td->thread_hnd = Curl_thread_create(getaddrinfo_thread, &td->tsd);
 #else
@@ -574,17 +559,9 @@ int Curl_resolver_getsock(struct connectdata *conn,
                           curl_socket_t *socks,
                           int numsocks)
 {
-  const struct thread_data *td =
-    (const struct thread_data *) conn->async.os_specific;
-
-  if(td && td->dummy_sock != CURL_SOCKET_BAD) {
-    if(numsocks) {
-      /* return one socket waiting for readable, even though this is just
-         a dummy */
-      socks[0] = td->dummy_sock;
-      return GETSOCK_READSOCK(0);
-    }
-  }
+  (void)conn;
+  (void)socks;
+  (void)numsocks;
   return 0;
 }
 
@@ -696,4 +673,13 @@ Curl_addrinfo *Curl_resolver_getaddrinfo(struct connectdata *conn,
 
 #endif /* !HAVE_GETADDRINFO */
 
+CURLcode Curl_set_dns_servers(struct SessionHandle *data,
+                              char *servers)
+{
+  (void)data;
+  (void)servers;
+  return CURLE_NOT_BUILT_IN;
+
+}
+
 #endif /* CURLRES_THREADED */

lib/base64.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -58,11 +58,11 @@ static void decodeQuantum(unsigned char *dest, const char *src)
       x = (x << 6);
   }
 
-  dest[2] = curlx_ultouc(x);
+  dest[2] = curlx_ultouc(x & 0xFFUL);
   x >>= 8;
-  dest[1] = curlx_ultouc(x);
+  dest[1] = curlx_ultouc(x & 0xFFUL);
   x >>= 8;
-  dest[0] = curlx_ultouc(x);
+  dest[0] = curlx_ultouc(x & 0xFFUL);
 }
 
 /*

lib/config-amigaos.h

@@ -1,5 +1,5 @@
-#ifndef LIBCURL_CONFIG_AMIGAOS_H
-#define LIBCURL_CONFIG_AMIGAOS_H
+#ifndef HEADER_CURL_CONFIG_AMIGAOS_H
+#define HEADER_CURL_CONFIG_AMIGAOS_H
 /***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -22,6 +22,10 @@
  *
  ***************************************************************************/
 
+/* ================================================================ */
+/*               Hand crafted config file for AmigaOS               */
+/* ================================================================ */
+
 #ifdef __AMIGA__ /* Any AmigaOS flavour */
 
 #define HAVE_ARPA_INET_H 1
@@ -72,8 +76,6 @@
 #define HAVE_SYS_STAT_H 1
 #define HAVE_SYS_TIME_H 1
 #define HAVE_SYS_TYPES_H 1
-#define HAVE_TERMIOS_H 1
-#define HAVE_TERMIO_H 1
 #define HAVE_TIME_H 1
 #define HAVE_UNAME 1
 #define HAVE_UNISTD_H 1
@@ -89,11 +91,11 @@
 #define SIZEOF_SHORT 2
 #define SIZEOF_SIZE_T 4
 
+#define USE_MANUAL 1
 #define USE_OPENSSL 1
 #define USE_SSLEAY 1
 #define CURL_DISABLE_LDAP 1
 
-
 #define OS "AmigaOS"
 
 #define PACKAGE "curl"
@@ -114,8 +116,20 @@
 
 #define in_addr_t int
 
+#ifndef F_OK
+#  define F_OK 0
+#endif
+
 #ifndef O_RDONLY
-# define O_RDONLY 0x0000
+#  define O_RDONLY 0x0000
+#endif
+
+#ifndef LONG_MAX
+#  define LONG_MAX 0x7fffffffL
+#endif
+
+#ifndef LONG_MIN
+#  define LONG_MIN (-0x7fffffffL-1)
 #endif
 
 #define HAVE_GETNAMEINFO 1
@@ -150,4 +164,4 @@
 #define SEND_TYPE_RETV int
 
 #endif /* __AMIGA__ */
-#endif /* LIBCURL_CONFIG_AMIGAOS_H */
+#endif /* HEADER_CURL_CONFIG_AMIGAOS_H */

lib/config-mac.h

@@ -1,5 +1,5 @@
-#ifndef __LIB_CONFIG_MAC_H
-#define __LIB_CONFIG_MAC_H
+#ifndef HEADER_CURL_CONFIG_MAC_H
+#define HEADER_CURL_CONFIG_MAC_H
 /***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -23,13 +23,16 @@
  ***************************************************************************/
 
 /* =================================================================== */
-/*   lib/config-mac.h - Hand crafted config file for Mac OS 9          */
+/*                Hand crafted config file for Mac OS 9                */
 /* =================================================================== */
 /*  On Mac OS X you must run configure to generate curl_config.h file  */
 /* =================================================================== */
 
 #define OS "mac"
 
+/* Define if you want the built-in manual */
+#define USE_MANUAL              1
+
 #define HAVE_ERRNO_H            1
 #define HAVE_NETINET_IN_H       1
 #define HAVE_SYS_SOCKET_H       1
@@ -43,15 +46,16 @@
 #define HAVE_FCNTL_H            1
 #define HAVE_SYS_STAT_H         1
 #define HAVE_ALLOCA_H           1
-#define HAVE_TIME_H             1
 #define HAVE_STDLIB_H           1
+#define HAVE_TIME_H             1
 #define HAVE_UTIME_H            1
 #define HAVE_SYS_TIME_H         1
+#define HAVE_SYS_UTIME_H        1
 
 #define TIME_WITH_SYS_TIME      1
 
 #define HAVE_ALARM              1
-#define HAVE_STRDUP             1
+#define HAVE_FTRUNCATE          1
 #define HAVE_UTIME              1
 #define HAVE_SETVBUF            1
 #define HAVE_STRFTIME           1
@@ -61,14 +65,13 @@
 #define HAVE_SOCKET             1
 #define HAVE_STRUCT_TIMEVAL     1
 
-//#define HAVE_STRICMP          1
 #define HAVE_SIGACTION          1
 #define HAVE_SIGNAL_H           1
 #define HAVE_SIG_ATOMIC_T       1
 
 #ifdef MACOS_SSL_SUPPORT
-#       define USE_SSLEAY       1
-#       define USE_OPENSSL      1
+#  define USE_SSLEAY            1
+#  define USE_OPENSSL           1
 #endif
 
 #define CURL_DISABLE_LDAP       1
@@ -120,4 +123,4 @@
 #define HAVE_EXTRA_STRICMP_H 1
 #define HAVE_EXTRA_STRDUP_H  1
 
-#endif /* __LIB_CONFIG_MAC_H */
+#endif /* HEADER_CURL_CONFIG_MAC_H */

lib/config-os400.h

@@ -1,6 +1,5 @@
-/* ================================================================ */
-/*    lib/config-os400.h - Hand crafted config file for OS/400      */
-/* ================================================================ */
+#ifndef HEADER_CURL_CONFIG_OS400_H
+#define HEADER_CURL_CONFIG_OS400_H
 /***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
@@ -8,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -23,6 +22,10 @@
  *
  ***************************************************************************/
 
+/* ================================================================ */
+/*                Hand crafted config file for OS/400               */
+/* ================================================================ */
+
 #pragma enum(int)
 
 #undef PACKAGE
@@ -434,10 +437,7 @@
 /* To disable LDAP */
 #undef CURL_DISABLE_LDAP
 
-/* To avoid external use of library hidden symbols */
-#define CURL_HIDDEN_SYMBOLS
-
-/* External symbols need no special keyword. */
+/* Definition to make a library symbol externally visible. */
 #define CURL_EXTERN_SYMBOL
 
 /* Define if you have the ldap_url_parse procedure. */
@@ -542,3 +542,4 @@
 #define qadrt_use_fread_inline         /* Generate fread() wrapper inline. */
 #define qadrt_use_fwrite_inline        /* Generate fwrite() wrapper inline. */
 
+#endif /* HEADER_CURL_CONFIG_OS400_H */

lib/config-riscos.h

@@ -1,11 +1,13 @@
-/* curl_config.h.in.  Generated automatically from configure.in by autoheader. /***************************************************************************
+#ifndef HEADER_CURL_CONFIG_RISCOS_H
+#define HEADER_CURL_CONFIG_RISCOS_H
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -19,7 +21,11 @@
  * KIND, either express or implied.
  *
  ***************************************************************************/
- */
+
+/* ================================================================ */
+/*               Hand crafted config file for RISC OS               */
+/* ================================================================ */
+
 /* Name of this package! */
 #undef PACKAGE
 
@@ -32,6 +38,9 @@
 /* Define cpu-machine-OS */
 #define OS "ARM-RISC OS"
 
+/* Define if you want the built-in manual */
+#define USE_MANUAL
+
 /* Define if you have the gethostbyaddr_r() function with 5 arguments */
 #undef HAVE_GETHOSTBYADDR_R_5
 
@@ -74,8 +83,8 @@
 /* Define if you want to enable IPv6 support */
 #undef ENABLE_IPV6
 
-/* Define to 1 if you have the alarm function. */
-#define HAVE_ALARM 1
+/* Define if you have the alarm function. */
+#define HAVE_ALARM
 
 /* Define if you have the <alloca.h> header file. */
 #define HAVE_ALLOCA_H
@@ -101,6 +110,9 @@
 /* Define if you have the <fcntl.h> header file. */
 #define HAVE_FCNTL_H
 
+/* Define if you have the `ftruncate' function. */
+#define HAVE_FTRUNCATE
+
 /* Define if getaddrinfo exists and works */
 #define HAVE_GETADDRINFO
 
@@ -144,7 +156,7 @@
 #define HAVE_INTTYPES_H
 
 /* Define if you have the <io.h> header file. */
-#define HAVE_IO_H
+#undef HAVE_IO_H
 
 /* Define if you have the `krb_get_our_ip_for_realm' function. */
 #undef HAVE_KRB_GET_OUR_IP_FOR_REALM
@@ -462,8 +474,8 @@
 /* Define to the type pointed by arg 2 for recvfrom. */
 #define RECVFROM_TYPE_ARG2 void
 
-/* Define to 1 if the type pointed by arg 2 for recvfrom is void. */
-#define RECVFROM_TYPE_ARG2_IS_VOID 1
+/* Define if the type pointed by arg 2 for recvfrom is void. */
+#define RECVFROM_TYPE_ARG2_IS_VOID
 
 /* Define to the type of arg 3 for recvfrom. */
 #define RECVFROM_TYPE_ARG3 size_t
@@ -500,3 +512,5 @@
 
 /* Define to the function return type for send. */
 #define SEND_TYPE_RETV ssize_t
+
+#endif /* HEADER_CURL_CONFIG_RISCOS_H */

lib/config-symbian.h

@@ -1,4 +1,5 @@
-/* config-symbian.h.  Manually generated.  */
+#ifndef HEADER_CURL_CONFIG_SYMBIAN_H
+#define HEADER_CURL_CONFIG_SYMBIAN_H
 /***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
@@ -6,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -21,8 +22,9 @@
  *
  ***************************************************************************/
 
-/* when building libcurl itself */
-/* #undef BUILDING_LIBCURL */
+/* ================================================================ */
+/*               Hand crafted config file for Symbian               */
+/* ================================================================ */
 
 /* Location of default ca bundle */
 /* #define CURL_CA_BUNDLE "/etc/pki/tls/certs/ca-bundle.crt"*/
@@ -63,18 +65,12 @@
 /* to disable verbose strings */
 /* #define CURL_DISABLE_VERBOSE_STRINGS 1*/
 
-/* to make a symbol visible */
-/*#define CURL_EXTERN_SYMBOL  __declspec(dllexport)*/
-
-/* to enable hidden symbols */
-/*#define CURL_HIDDEN_SYMBOLS 1*/
+/* Definition to make a library symbol externally visible. */
+/* #undef CURL_EXTERN_SYMBOL */
 
 /* Use Windows LDAP implementation */
 /* #undef CURL_LDAP_WIN */
 
-/* when not building a shared library */
-/* #undef CURL_STATICLIB */
-
 /* your Entropy Gathering Daemon socket pathname */
 /* #undef EGD_SOCKET */
 
@@ -400,9 +396,6 @@
 /* Define to 1 if you have the `pipe' function. */
 #define HAVE_PIPE 1
 
-/* if you have the function PK11_CreateGenericObject */
-/* #undef HAVE_PK11_CREATEGENERICOBJECT */
-
 /* Define to 1 if you have the `poll' function. */
 /*#define HAVE_POLL 1*/
 
@@ -646,9 +639,6 @@
 /* Define to 1 if you have the <x509.h> header file. */
 /* #undef HAVE_X509_H */
 
-/* Define to 1 if you are building a native Windows target. */
-/* #undef NATIVE_WINDOWS */
-
 /* Define to 1 if you need the lber.h header file even with ldap.h */
 /* #undef NEED_LBER_H */
 
@@ -830,3 +820,5 @@
 /* if OpenSSL is in use */
 #define USE_OPENSSL
 #endif
+
+#endif /* HEADER_CURL_CONFIG_SYMBIAN_H */

lib/config-tpf.h

@@ -1,5 +1,5 @@
-#ifndef __LIBCONFIGTPF_H
-#define __LIBCONFIGTPF_H
+#ifndef HEADER_CURL_CONFIG_TPF_H
+#define HEADER_CURL_CONFIG_TPF_H
 /***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -23,7 +23,7 @@
  ***************************************************************************/
 
 /* ================================================================ */
-/*    lib/config-tpf.h - Hand crafted config file for TPF           */
+/*                 Hand crafted config file for TPF                 */
 /* ================================================================ */
 
 /* ---------------------------------------------------------------- */
@@ -32,9 +32,6 @@
 
 /* NOTE: Refer also to the .mak file for some of the flags below */
 
-/* when building libcurl itself */
-/* #undef BUILDING_LIBCURL */
-
 /* to disable cookies support */
 /* #undef CURL_DISABLE_COOKIES */
 
@@ -65,9 +62,6 @@
 /* to disable verbose strings */
 /* #undef CURL_DISABLE_VERBOSE_STRINGS */
 
-/* when not building a shared library */
-/* #undef CURL_STATICLIB */
-
 /* lber dynamic library file */
 /* #undef DL_LBER_FILE */
 
@@ -779,4 +773,4 @@
 #endif
 
 
-#endif /* __LIBCONFIGTPF_H */
+#endif /* HEADER_CURL_CONFIG_TPF_H */

lib/config-vxworks.h

@@ -1,5 +1,5 @@
-#ifndef __LIB_CONFIG_VXWORKS_H
-#define __LIB_CONFIG_VXWORKS_H
+#ifndef HEADER_CURL_CONFIG_VXWORKS_H
+#define HEADER_CURL_CONFIG_VXWORKS_H
 /***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -23,12 +23,9 @@
  ***************************************************************************/
 
 /* =============================================================== */
-/*   lib/config-vxworks.h - Hand crafted config file for VxWorks   */
+/*               Hand crafted config file for VxWorks              */
 /* =============================================================== */
 
-/* when building libcurl itself */
-/* #undef BUILDING_LIBCURL */
-
 /* Location of default ca bundle */
 /* #undef CURL_CA_BUNDLE */
 
@@ -74,18 +71,12 @@
 /* to disable verbose strings */
 /* #undef CURL_DISABLE_VERBOSE_STRINGS */
 
-/* to make a symbol visible */
+/* Definition to make a library symbol externally visible. */
 /* #undef CURL_EXTERN_SYMBOL */
 
-/* to enable hidden symbols */
-/* #undef CURL_HIDDEN_SYMBOLS */
-
 /* Use Windows LDAP implementation */
 /* #undef CURL_LDAP_WIN */
 
-/* when not building a shared library */
-/* #undef CURL_STATICLIB */
-
 /* your Entropy Gathering Daemon socket pathname */
 /* #undef EGD_SOCKET */
 
@@ -469,9 +460,6 @@
 /* Define to 1 if you have the `pipe' function. */
 #define HAVE_PIPE 1
 
-/* if you have the function PK11_CreateGenericObject */
-/* #undef HAVE_PK11_CREATEGENERICOBJECT */
-
 /* Define to 1 if you have a working poll function. */
 /* #undef HAVE_POLL */
 
@@ -745,9 +733,6 @@
 /* if you have the zlib.h header file */
 #define HAVE_ZLIB_H 1
 
-/* Define to 1 if you are building a native Windows target. */
-/* #undef NATIVE_WINDOWS */
-
 /* Define to 1 if you need the lber.h header file even with ldap.h */
 /* #undef NEED_LBER_H */
 
@@ -952,4 +937,4 @@
 /* the signed version of size_t */
 /* #undef ssize_t */
 
-#endif /* __LIB_CONFIG_VXWORKS_H */
+#endif /* HEADER_CURL_CONFIG_VXWORKS_H */

lib/config-win32.h

@@ -653,10 +653,10 @@
 #undef OS
 #if defined(_M_IX86) || defined(__i386__) /* x86 (MSVC or gcc) */
 #define OS "i386-pc-win32"
+#elif defined(_M_X64) || defined(__x86_64__) /* x86_64 (MSVC >=2005 or gcc) */
+#define OS "x86_64-pc-win32"
 #elif defined(_M_IA64) /* Itanium */
 #define OS "ia64-pc-win32"
-#elif defined(_M_X64) /* AMD64/EM64T - Not defined until MSVC 2005 */
-#define OS "amd64-pc-win32"
 #else
 #define OS "unknown-pc-win32"
 #endif

lib/connect.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -89,20 +89,37 @@
 #undef SO_NOSIGPIPE
 #endif
 
-struct Curl_sockaddr_ex {
-  int family;
-  int socktype;
-  int protocol;
-  unsigned int addrlen;
-  union {
-    struct sockaddr addr;
-    struct Curl_sockaddr_storage buff;
-  } _sa_ex_u;
-};
-#define sa_addr _sa_ex_u.addr
-
 static bool verifyconnect(curl_socket_t sockfd, int *error);
 
+static void
+tcpkeepalive(struct SessionHandle *data,
+             curl_socket_t sockfd)
+{
+  int optval = data->set.tcp_keepalive?1:0;
+
+  /* only set IDLE and INTVL if setting KEEPALIVE is successful */
+  if(setsockopt(sockfd, SOL_SOCKET, SO_KEEPALIVE,
+        (void *)&optval, sizeof(optval)) < 0) {
+    infof(data, "Failed to set SO_KEEPALIVE on fd %d\n", sockfd);
+  }
+  else {
+#ifdef TCP_KEEPIDLE
+    optval = curlx_sltosi(data->set.tcp_keepidle);
+    if(setsockopt(sockfd, IPPROTO_TCP, TCP_KEEPIDLE,
+          (void *)&optval, sizeof(optval)) < 0) {
+      infof(data, "Failed to set TCP_KEEPIDLE on fd %d\n", sockfd);
+    }
+#endif
+#ifdef TCP_KEEPINTVL
+    optval = curlx_sltosi(data->set.tcp_keepintvl);
+    if(setsockopt(sockfd, IPPROTO_TCP, TCP_KEEPINTVL,
+          (void *)&optval, sizeof(optval)) < 0) {
+      infof(data, "Failed to set TCP_KEEPINTVL on fd %d\n", sockfd);
+    }
+#endif
+  }
+}
+
 static CURLcode
 singleipconnect(struct connectdata *conn,
                 const Curl_addrinfo *ai, /* start connecting to this */
@@ -252,6 +269,10 @@ static CURLcode bindlocal(struct connectdata *conn,
   int error;
   char myhost[256] = "";
   int done = 0; /* -1 for error, 1 for address found */
+  bool is_interface = FALSE;
+  bool is_host = FALSE;
+  static const char *if_prefix = "if!";
+  static const char *host_prefix = "host!";
 
   /*************************************************************
    * Select device to bind socket to
@@ -263,9 +284,20 @@ static CURLcode bindlocal(struct connectdata *conn,
   memset(&sa, 0, sizeof(struct Curl_sockaddr_storage));
 
   if(dev && (strlen(dev)<255) ) {
+    if(strncmp(if_prefix, dev, strlen(if_prefix)) == 0) {
+      dev += strlen(if_prefix);
+      is_interface = TRUE;
+    }
+    else if(strncmp(host_prefix, dev, strlen(host_prefix)) == 0) {
+      dev += strlen(host_prefix);
+      is_host = TRUE;
+    }
 
     /* interface */
-    if(Curl_if2ip(af, dev, myhost, sizeof(myhost))) {
+    if(!is_host && (is_interface || Curl_if_is_interface_name(dev))) {
+      if(Curl_if2ip(af, dev, myhost, sizeof(myhost)) == NULL)
+        return CURLE_INTERFACE_FAILED;
+
       /*
        * We now have the numerical IP address in the 'myhost' buffer
        */
@@ -729,6 +761,8 @@ CURLcode Curl_is_connected(struct connectdata *conn,
   }
   next:
 
+  conn->timeoutms_per_addr = conn->ip_addr->ai_next == NULL ?
+                             allow : allow / 2;
   code = trynextip(conn, sockindex, connected);
 
   if(code) {
@@ -836,62 +870,22 @@ singleipconnect(struct connectdata *conn,
 {
   struct Curl_sockaddr_ex addr;
   int rc;
-  int error;
+  int error = 0;
   bool isconnected = FALSE;
   struct SessionHandle *data = conn->data;
   curl_socket_t sockfd;
   CURLcode res = CURLE_OK;
-#if defined(ENABLE_IPV6) && defined(HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID)
-  struct sockaddr_in6 * const sa6 = (void *)&addr.sa_addr;
-#endif
 
   *sockp = CURL_SOCKET_BAD;
-
-  /*
-   * The Curl_sockaddr_ex structure is basically libcurl's external API
-   * curl_sockaddr structure with enough space available to directly hold
-   * any protocol-specific address structures. The variable declared here
-   * will be used to pass / receive data to/from the fopensocket callback
-   * if this has been set, before that, it is initialized from parameters.
-   */
-
-  addr.family = ai->ai_family;
-  addr.socktype = conn->socktype;
-  addr.protocol = conn->socktype==SOCK_DGRAM?IPPROTO_UDP:ai->ai_protocol;
-  addr.addrlen = ai->ai_addrlen;
-
-  if(addr.addrlen > sizeof(struct Curl_sockaddr_storage))
-     addr.addrlen = sizeof(struct Curl_sockaddr_storage);
-  memcpy(&addr.sa_addr, ai->ai_addr, addr.addrlen);
-
   *connected = FALSE; /* default is not connected */
 
-  if(data->set.fopensocket)
-   /*
-    * If the opensocket callback is set, all the destination address
-    * information is passed to the callback. Depending on this information the
-    * callback may opt to abort the connection, this is indicated returning
-    * CURL_SOCKET_BAD; otherwise it will return a not-connected socket. When
-    * the callback returns a valid socket the destination address information
-    * might have been changed and this 'new' address will actually be used
-    * here to connect.
-    */
-    sockfd = data->set.fopensocket(data->set.opensocket_client,
-                                   CURLSOCKTYPE_IPCXN,
-                                   (struct curl_sockaddr *)&addr);
-  else
-    /* opensocket callback not set, so simply create the socket now */
-    sockfd = socket(addr.family, addr.socktype, addr.protocol);
-
-  if(sockfd == CURL_SOCKET_BAD)
-    /* no socket, no connection */
+  res = Curl_socket(conn, ai, &addr, &sockfd);
+  if(res)
+    /* Failed to create the socket, but still return OK since we signal the
+       lack of socket as well. This allows the parent function to keep looping
+       over alternative addresses/socket families etc. */
     return CURLE_OK;
 
-#if defined(ENABLE_IPV6) && defined(HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID)
-  if(conn->scope && (addr.family == AF_INET6))
-    sa6->sin6_scope_id = conn->scope;
-#endif
-
   /* store remote address and port used in this connection attempt */
   if(!getaddressinfo((struct sockaddr*)&addr.sa_addr,
                      conn->primary_ip, &conn->primary_port)) {
@@ -903,15 +897,10 @@ singleipconnect(struct connectdata *conn,
     return CURLE_OK;
   }
   memcpy(conn->ip_addr_str, conn->primary_ip, MAX_IPADR_LEN);
-  infof(data, "  Trying %s... ", conn->ip_addr_str);
+  infof(data, "  Trying %s...\n", conn->ip_addr_str);
 
   Curl_persistconninfo(conn);
 
-#ifdef ENABLE_IPV6
-  if(addr.family == AF_INET6)
-    conn->bits.ipv6 = TRUE;
-#endif
-
   if(data->set.tcp_nodelay)
     tcpnodelay(conn, sockfd);
 
@@ -919,6 +908,9 @@ singleipconnect(struct connectdata *conn,
 
   Curl_sndbufset(sockfd);
 
+  if(data->set.tcp_keepalive)
+    tcpkeepalive(data, sockfd);
+
   if(data->set.fsockopt) {
     /* activate callback for setting socket options */
     error = data->set.fsockopt(data->set.sockopt_client,
@@ -946,6 +938,8 @@ singleipconnect(struct connectdata *conn,
   /* Connect TCP sockets, bind UDP */
   if(!isconnected && (conn->socktype == SOCK_STREAM)) {
     rc = connect(sockfd, &addr.sa_addr, addr.addrlen);
+    if(-1 == rc)
+      error = SOCKERRNO;
     conn->connecttime = Curl_tvnow();
     if(conn->num_addr > 1)
       Curl_expire(data, conn->timeoutms_per_addr);
@@ -954,8 +948,6 @@ singleipconnect(struct connectdata *conn,
     rc = 0;
 
   if(-1 == rc) {
-    error = SOCKERRNO;
-
     switch (error) {
     case EINPROGRESS:
     case EWOULDBLOCK:
@@ -999,6 +991,10 @@ singleipconnect(struct connectdata *conn,
     /* we are connected, awesome! */
     *connected = TRUE; /* this is a true connect */
     infof(data, "connected\n");
+#ifdef ENABLE_IPV6
+    conn->bits.ipv6 = (addr.family == AF_INET6)?TRUE:FALSE;
+#endif
+
     Curl_updateconninfo(conn, sockfd);
     *sockp = sockfd;
     return CURLE_OK;
@@ -1030,7 +1026,6 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
 {
   struct SessionHandle *data = conn->data;
   curl_socket_t sockfd = CURL_SOCKET_BAD;
-  int aliasindex;
   Curl_addrinfo *ai;
   Curl_addrinfo *curr_addr;
 
@@ -1054,9 +1049,7 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
     return CURLE_OPERATION_TIMEDOUT;
   }
 
-  /* Max time for each address */
   conn->num_addr = Curl_num_addresses(remotehost->addr);
-  conn->timeoutms_per_addr = timeout_ms / conn->num_addr;
 
   ai = remotehost->addr;
 
@@ -1067,16 +1060,18 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
   /*
    * Connecting with a Curl_addrinfo chain
    */
-  for(curr_addr = ai, aliasindex=0; curr_addr;
-      curr_addr = curr_addr->ai_next, aliasindex++) {
+  for(curr_addr = ai; curr_addr; curr_addr = curr_addr->ai_next) {
+    CURLcode res;
+
+    /* Max time for the next address */
+    conn->timeoutms_per_addr = curr_addr->ai_next == NULL ?
+                               timeout_ms : timeout_ms / 2;
 
     /* start connecting to the IP curr_addr points to */
-    CURLcode res =
-      singleipconnect(conn, curr_addr,
-                      /* don't hang when doing multi */
-                      (data->state.used_interface == Curl_if_multi)?0:
-                      conn->timeoutms_per_addr, &sockfd, connected);
-
+    res = singleipconnect(conn, curr_addr,
+                          /* don't hang when doing multi */
+                          (data->state.used_interface == Curl_if_multi)?0:
+                          conn->timeoutms_per_addr, &sockfd, connected);
     if(res)
       return res;
 
@@ -1166,8 +1161,85 @@ curl_socket_t Curl_getconnectinfo(struct SessionHandle *data,
 int Curl_closesocket(struct connectdata *conn,
                      curl_socket_t sock)
 {
-  if(conn && conn->fclosesocket)
-    return conn->fclosesocket(conn->closesocket_client, sock);
-  else
-    return sclose(sock);
+  if(conn && conn->fclosesocket) {
+    if((sock == conn->sock[SECONDARYSOCKET]) &&
+       conn->sock_accepted[SECONDARYSOCKET])
+      /* if this socket matches the second socket, and that was created with
+         accept, then we MUST NOT call the callback but clear the accepted
+         status */
+      conn->sock_accepted[SECONDARYSOCKET] = FALSE;
+    else
+      return conn->fclosesocket(conn->closesocket_client, sock);
+  }
+  return sclose(sock);
+}
+
+/*
+ * Create a socket based on info from 'conn' and 'ai'.
+ *
+ * 'addr' should be a pointer to the correct struct to get data back, or NULL.
+ * 'sockfd' must be a pointer to a socket descriptor.
+ *
+ * If the open socket callback is set, used that!
+ *
+ */
+CURLcode Curl_socket(struct connectdata *conn,
+                     const Curl_addrinfo *ai,
+                     struct Curl_sockaddr_ex *addr,
+                     curl_socket_t *sockfd)
+{
+  struct SessionHandle *data = conn->data;
+  struct Curl_sockaddr_ex dummy;
+
+  if(!addr)
+    /* if the caller doesn't want info back, use a local temp copy */
+    addr = &dummy;
+
+  /*
+   * The Curl_sockaddr_ex structure is basically libcurl's external API
+   * curl_sockaddr structure with enough space available to directly hold
+   * any protocol-specific address structures. The variable declared here
+   * will be used to pass / receive data to/from the fopensocket callback
+   * if this has been set, before that, it is initialized from parameters.
+   */
+
+  addr->family = ai->ai_family;
+  addr->socktype = conn->socktype;
+  addr->protocol = conn->socktype==SOCK_DGRAM?IPPROTO_UDP:ai->ai_protocol;
+  addr->addrlen = ai->ai_addrlen;
+
+  if(addr->addrlen > sizeof(struct Curl_sockaddr_storage))
+     addr->addrlen = sizeof(struct Curl_sockaddr_storage);
+  memcpy(&addr->sa_addr, ai->ai_addr, addr->addrlen);
+
+  if(data->set.fopensocket)
+   /*
+    * If the opensocket callback is set, all the destination address
+    * information is passed to the callback. Depending on this information the
+    * callback may opt to abort the connection, this is indicated returning
+    * CURL_SOCKET_BAD; otherwise it will return a not-connected socket. When
+    * the callback returns a valid socket the destination address information
+    * might have been changed and this 'new' address will actually be used
+    * here to connect.
+    */
+    *sockfd = data->set.fopensocket(data->set.opensocket_client,
+                                    CURLSOCKTYPE_IPCXN,
+                                    (struct curl_sockaddr *)addr);
+  else
+    /* opensocket callback not set, so simply create the socket now */
+    *sockfd = socket(addr->family, addr->socktype, addr->protocol);
+
+  if(*sockfd == CURL_SOCKET_BAD)
+    /* no socket, no connection */
+    return CURLE_COULDNT_CONNECT;
+
+#if defined(ENABLE_IPV6) && defined(HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID)
+  if(conn->scope && (addr->family == AF_INET6)) {
+    struct sockaddr_in6 * const sa6 = (void *)&addr->sa_addr;
+    sa6->sin6_scope_id = conn->scope;
+  }
+#endif
+
+  return CURLE_OK;
+
 }

lib/connect.h

@@ -24,6 +24,7 @@
 #include "setup.h"
 
 #include "nonblock.h" /* for curlx_nonblock(), formerly Curl_nonblock() */
+#include "sockaddr.h"
 
 CURLcode Curl_is_connected(struct connectdata *conn,
                            int sockindex,
@@ -72,4 +73,35 @@ void Curl_updateconninfo(struct connectdata *conn, curl_socket_t sockfd);
 void Curl_persistconninfo(struct connectdata *conn);
 int Curl_closesocket(struct connectdata *conn, curl_socket_t sock);
 
+/*
+ * The Curl_sockaddr_ex structure is basically libcurl's external API
+ * curl_sockaddr structure with enough space available to directly hold any
+ * protocol-specific address structures. The variable declared here will be
+ * used to pass / receive data to/from the fopensocket callback if this has
+ * been set, before that, it is initialized from parameters.
+ */
+struct Curl_sockaddr_ex {
+  int family;
+  int socktype;
+  int protocol;
+  unsigned int addrlen;
+  union {
+    struct sockaddr addr;
+    struct Curl_sockaddr_storage buff;
+  } _sa_ex_u;
+};
+#define sa_addr _sa_ex_u.addr
+
+/*
+ * Create a socket based on info from 'conn' and 'ai'.
+ *
+ * Fill in 'addr' and 'sockfd' accordingly if OK is returned. If the open
+ * socket callback is set, used that!
+ *
+ */
+CURLcode Curl_socket(struct connectdata *conn,
+                     const Curl_addrinfo *ai,
+                     struct Curl_sockaddr_ex *addr,
+                     curl_socket_t *sockfd);
+
 #endif /* HEADER_CURL_CONNECT_H */

lib/cookie.c

@@ -144,9 +144,9 @@ void Curl_cookie_loadfiles(struct SessionHandle *data)
                                        data->set.cookiesession);
       list = list->next;
     }
-    Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE);
     curl_slist_free_all(data->change.cookielist); /* clean up list */
     data->change.cookielist = NULL; /* don't do this again! */
+    Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE);
   }
 }
 
@@ -1107,23 +1107,20 @@ struct curl_slist *Curl_cookie_list(struct SessionHandle *data)
 
   c = data->cookies->cookies;
 
-  beg = list;
   while(c) {
     /* fill the list with _all_ the cookies we know */
     line = get_netscape_format(c);
-    if(line == NULL) {
-      curl_slist_free_all(beg);
+    if(!line) {
+      curl_slist_free_all(list);
       return NULL;
     }
-    list = curl_slist_append(list, line);
+    beg = curl_slist_append(list, line);
     free(line);
-    if(list == NULL) {
-      curl_slist_free_all(beg);
+    if(!beg) {
+      curl_slist_free_all(list);
       return NULL;
     }
-    else if(beg == NULL) {
-      beg = list;
-    }
+    list = beg;
     c = c->next;
   }
 
@@ -1148,10 +1145,12 @@ void Curl_flush_cookies(struct SessionHandle *data, int cleanup)
             data->set.str[STRING_COOKIEJAR]);
   }
   else {
-    if(cleanup && data->change.cookielist)
+    if(cleanup && data->change.cookielist) {
       /* since nothing is written, we can just free the list of cookie file
          names */
       curl_slist_free_all(data->change.cookielist); /* clean up list */
+      data->change.cookielist = NULL;
+    }
     Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE);
   }
 

lib/curl_config.h.cmake

@@ -1,4 +1,4 @@
-/* lib/curl_config.h.in.  Generated from configure.ac by autoheader.  */
+/* lib/curl_config.h.in.  Generated somehow by cmake.  */
 
 /* when building libcurl itself */
 #cmakedefine BUILDING_LIBCURL ${BUILDING_LIBCURL}
@@ -52,9 +52,6 @@
 #define CURL_EXTERN_SYMBOL
 #endif
 
-/* to enable hidden symbols */
-#cmakedefine CURL_HIDDEN_SYMBOLS ${CURL_HIDDEN_SYMBOLS}
-
 /* Use Windows LDAP implementation */
 #cmakedefine CURL_LDAP_WIN ${CURL_LDAP_WIN}
 
@@ -444,9 +441,6 @@
 /* Define to 1 if you have the `pipe' function. */
 #cmakedefine HAVE_PIPE ${HAVE_PIPE}
 
-/* if you have the function PK11_CreateGenericObject */
-#cmakedefine HAVE_PK11_CREATEGENERICOBJECT ${HAVE_PK11_CREATEGENERICOBJECT}
-
 /* Define to 1 if you have a working poll function. */
 #cmakedefine HAVE_POLL ${HAVE_POLL}
 
@@ -724,9 +718,6 @@
    */
 #cmakedefine LT_OBJDIR ${LT_OBJDIR}
 
-/* Define to 1 if you are building a native Windows target. */
-#cmakedefine NATIVE_WINDOWS ${NATIVE_WINDOWS}
-
 /* If you lack a fine basename() prototype */
 #cmakedefine NEED_BASENAME_PROTO ${NEED_BASENAME_PROTO}
 

lib/curl_gethostname.c

@@ -32,12 +32,16 @@
  * Curl_gethostname() is a wrapper around gethostname() which allows
  * overriding the host name that the function would normally return.
  * This capability is used by the test suite to verify exact matching
- * of NTLM authentication, which exercises libcurl's MD4 and DES code.
+ * of NTLM authentication, which exercises libcurl's MD4 and DES code
+ * as well as by the SMTP module when a hostname is not provided.
  *
  * For libcurl debug enabled builds host name overriding takes place
  * when environment variable CURL_GETHOSTNAME is set, using the value
  * held by the variable to override returned host name.
  *
+ * Note: The function always returns the un-qualified hostname rather
+ * than being provider dependent.
+ *
  * For libcurl shared library release builds the test suite preloads
  * another shared library named libhostname using the LD_PRELOAD
  * mechanism which intercepts, and might override, the gethostname()
@@ -58,6 +62,8 @@ int Curl_gethostname(char *name, GETHOSTNAME_TYPE_ARG2 namelen) {
   return -1;
 
 #else
+  int err;
+  char* dot;
 
 #ifdef DEBUGBUILD
 
@@ -65,17 +71,34 @@ int Curl_gethostname(char *name, GETHOSTNAME_TYPE_ARG2 namelen) {
   const char *force_hostname = getenv("CURL_GETHOSTNAME");
   if(force_hostname) {
     strncpy(name, force_hostname, namelen);
-    name[namelen-1] = '\0';
-    return 0;
+    err = 0;
+  }
+  else {
+    name[0] = '\0';
+    err = gethostname(name, namelen);
   }
 
-#endif /* DEBUGBUILD */
+#else /* DEBUGBUILD */
 
   /* The call to system's gethostname() might get intercepted by the
      libhostname library when libcurl is built as a non-debug shared
      library when running the test suite. */
-  return gethostname(name, namelen);
+  name[0] = '\0';
+  err = gethostname(name, namelen);
 
 #endif
 
+  name[namelen - 1] = '\0';
+
+  if(err)
+    return err;
+
+  /* Truncate domain, leave only machine name */
+  dot = strchr(name, '.');
+  if(dot)
+    *dot = '\0';
+
+  return 0;
+#endif
+
 }

lib/curl_gethostname.h

@@ -22,6 +22,10 @@
  *
  ***************************************************************************/
 
+/* Hostname buffer size */
+#define HOSTNAME_MAX 1024
+
+/* This returns the local machine's un-qualified hostname */
 int Curl_gethostname(char *name, GETHOSTNAME_TYPE_ARG2 namelen);
 
 #endif /* HEADER_CURL_GETHOSTNAME_H */

lib/curl_md5.h

@@ -25,10 +25,39 @@
 #ifndef CURL_DISABLE_CRYPTO_AUTH
 #include "curl_hmac.h"
 
+#define MD5_DIGEST_LEN  16
+
+typedef void (* Curl_MD5_init_func)(void *context);
+typedef void (* Curl_MD5_update_func)(void *context,
+                                      const unsigned char *data,
+                                      unsigned int len);
+typedef void (* Curl_MD5_final_func)(unsigned char *result, void *context);
+
+typedef struct {
+  Curl_MD5_init_func     md5_init_func;   /* Initialize context procedure */
+  Curl_MD5_update_func   md5_update_func; /* Update context with data */
+  Curl_MD5_final_func    md5_final_func;  /* Get final result procedure */
+  unsigned int           md5_ctxtsize;  /* Context structure size */
+  unsigned int           md5_resultlen; /* Result length (bytes) */
+} MD5_params;
+
+typedef struct {
+  const MD5_params      *md5_hash;      /* Hash function definition */
+  void                  *md5_hashctx;   /* Hash function context */
+} MD5_context;
+
+extern const MD5_params Curl_DIGEST_MD5[1];
 extern const HMAC_params Curl_HMAC_MD5[1];
 
 void Curl_md5it(unsigned char *output,
                 const unsigned char *input);
+
+MD5_context * Curl_MD5_init(const MD5_params *md5params);
+int Curl_MD5_update(MD5_context *context,
+                    const unsigned char *data,
+                    unsigned int len);
+int Curl_MD5_final(MD5_context *context, unsigned char *result);
+
 #endif
 
 #endif /* HEADER_CURL_MD5_H */