base64.c: removed wrong comment

Clarified the release procedure

CMake/CheckTypeSize.c.in

@@ -1,44 +0,0 @@
-#cmakedefine CHECK_TYPE_SIZE_TYPE @CHECK_TYPE_SIZE_TYPE@
-#ifdef CHECK_TYPE_SIZE_TYPE
-
-@CHECK_TYPE_SIZE_PREINCLUDE@
-#ifdef HAVE_SYS_TYPES_H
-#  include <sys/types.h>
-#endif /* HAVE_SYS_TYPES_H */
-
-#ifdef HAVE_SYS_SOCKET_H
-#  include <sys/socket.h>
-#endif
-
-#ifdef _WIN32
-#  include <winsock2.h>
-#  include <ws2tcpip.h>
-#endif
-
-
-#ifdef HAVE_STDINT_H
-#  include <stdint.h>
-#endif /* HAVE_STDINT_H */
-
-#ifdef HAVE_STDDEF_H
-#  include <stddef.h>
-#endif /* HAVE_STDDEF_H */
-
-@CHECK_TYPE_SIZE_PREMAIN@
-
-#ifdef __CLASSIC_C__
-int main(){
-  int ac;
-  char*av[];
-#else
-int main(int ac, char*av[]){
-#endif
-  if(ac > 1000){return *av[0];}
-  return sizeof(CHECK_TYPE_SIZE_TYPE);
-}
-
-#else  /* CHECK_TYPE_SIZE_TYPE */
-
-#  error "CHECK_TYPE_SIZE_TYPE has to specify the type"
-
-#endif /* CHECK_TYPE_SIZE_TYPE */

CMake/CheckTypeSize.cmake

@@ -1,57 +0,0 @@
-# - Check sizeof a type
-#  CHECK_TYPE_SIZE(TYPE VARIABLE)
-# Check if the type exists and determine size of type.  if the type
-# exists, the size will be stored to the variable.
-#
-#  VARIABLE - variable to store size if the type exists.
-#  HAVE_${VARIABLE} - does the variable exists or not
-
-macro(CHECK_TYPE_SIZE TYPE VARIABLE)
-  set(CMAKE_ALLOW_UNKNOWN_VARIABLE_READ_ACCESS 1)
-  if(NOT DEFINED ${VARIABLE})
-    if("HAVE_${VARIABLE}" MATCHES "^HAVE_${VARIABLE}$")
-      set(CHECK_TYPE_SIZE_TYPE "${TYPE}")
-      set(MACRO_CHECK_TYPE_SIZE_FLAGS
-        "${CMAKE_REQUIRED_FLAGS}")
-      foreach(def HAVE_SYS_TYPES_H 
-         HAVE_STDINT_H HAVE_STDDEF_H HAVE_SYS_SOCKET_H)
-        if("${def}")
-          set(MACRO_CHECK_TYPE_SIZE_FLAGS
-            "${MACRO_CHECK_TYPE_SIZE_FLAGS} -D${def}")
-        endif("${def}")
-      endforeach(def)
-      set(CHECK_TYPE_SIZE_PREMAIN)
-      foreach(def ${CMAKE_EXTRA_INCLUDE_FILES})
-        set(CHECK_TYPE_SIZE_PREMAIN "${CHECK_TYPE_SIZE_PREMAIN}#include \"${def}\"\n")
-      endforeach(def)
-      configure_file(
-        "${CMAKE_CURRENT_SOURCE_DIR}/CMake/CheckTypeSize.c.in"
-        "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckTypeSize.c"
-        IMMEDIATE @ONLY)
-      file(READ
-        "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckTypeSize.c"
-        CHECK_TYPE_SIZE_FILE_CONTENT)
-      message(STATUS "Check size of ${TYPE}")
-      if(CMAKE_REQUIRED_LIBRARIES)
-        set(CHECK_TYPE_SIZE_ADD_LIBRARIES
-          "-DLINK_LIBRARIES:STRING=${CMAKE_REQUIRED_LIBRARIES}")
-      endif(CMAKE_REQUIRED_LIBRARIES)
-      try_run(${VARIABLE} HAVE_${VARIABLE}
-        ${CMAKE_BINARY_DIR}
-        "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckTypeSize.c"
-        CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_TYPE_SIZE_FLAGS}
-        "${CHECK_TYPE_SIZE_ADD_LIBRARIES}"
-        OUTPUT_VARIABLE OUTPUT)
-      if(HAVE_${VARIABLE})
-        message(STATUS "Check size of ${TYPE} - done")
-        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-          "Determining size of ${TYPE} passed with the following output:\n${OUTPUT}\n\n")
-      else(HAVE_${VARIABLE})
-        message(STATUS "Check size of ${TYPE} - failed")
-        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-          "Determining size of ${TYPE} failed with the following output:\n${OUTPUT}\nCheckTypeSize.c:\n${CHECK_TYPE_SIZE_FILE_CONTENT}\n\n")
-      endif(HAVE_${VARIABLE})
-    endif("HAVE_${VARIABLE}" MATCHES "^HAVE_${VARIABLE}$")
-  endif(NOT DEFINED ${VARIABLE})
-  set(CMAKE_ALLOW_UNKNOWN_VARIABLE_READ_ACCESS )
-endmacro(CHECK_TYPE_SIZE)

CMake/CurlTests.c

@@ -1,3 +1,24 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #ifdef TIME_WITH_SYS_TIME
 /* Time with sys/time test */
 

CMakeLists.txt

@@ -183,13 +183,7 @@ include (CheckIncludeFile)
 include (CheckIncludeFiles)
 include (CheckLibraryExists)
 include (CheckSymbolExists)
-# if crosscompiling is on, the CHECK_TYPE_SIZE macro coming with cmake uses
-# TRY_COMPILE instead of TRY_RUN which makes crosscompiling easier, Alex
-if(CMAKE_CROSSCOMPILING)
-  include ("${CMAKE_MODULE_PATH}/CheckTypeSize.cmake")
-else(CMAKE_CROSSCOMPILING)
-  include (CheckTypeSize)
-endif(CMAKE_CROSSCOMPILING)
+include (CheckTypeSize)
 
 # On windows preload settings
 if(WIN32)
@@ -781,7 +775,13 @@ endif(CMAKE_COMPILER_IS_GNUCC AND APPLE)
 
 if(HAVE_SOCKLEN_T)
   set(CURL_TYPEOF_CURL_SOCKLEN_T "socklen_t")
+  if(WIN32)
+    set(CMAKE_EXTRA_INCLUDE_FILES "winsock2.h;ws2tcpip.h")
+  elseif(HAVE_SYS_SOCKET_H)
+    set(CMAKE_EXTRA_INCLUDE_FILES "sys/socket.h")
+  endif()
   check_type_size("socklen_t" CURL_SIZEOF_CURL_SOCKLEN_T)
+  set(CMAKE_EXTRA_INCLUDE_FILES)
   if(NOT HAVE_CURL_SIZEOF_CURL_SOCKLEN_T)
     message(FATAL_ERROR 
      "Check for sizeof socklen_t failed, see CMakeFiles/CMakerror.log")

COPYING

@@ -1,6 +1,6 @@
 COPYRIGHT AND PERMISSION NOTICE
 
-Copyright (c) 1996 - 2010, Daniel Stenberg, <daniel@haxx.se>.
+Copyright (c) 1996 - 2011, Daniel Stenberg, <daniel@haxx.se>.
 
 All rights reserved.
 

Makefile.am

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -24,15 +24,19 @@ AUTOMAKE_OPTIONS = foreign
 
 ACLOCAL_AMFLAGS = -I m4
 
-CMAKE_DIST = CMakeLists.txt CMake/CheckTypeSize.c.in CMake/CheckTypeSize.cmake \
-CMake/CMakeConfigurableFile.in CMake/CurlCheckCSourceCompiles.cmake	       \
-CMake/CurlCheckCSourceRuns.cmake CMake/CurlTests.c CMake/FindOpenSSL.cmake     \
-CMake/FindZLIB.cmake CMake/OtherTests.cmake CMake/Platforms/WindowsCache.cmake \
+CMAKE_DIST = CMakeLists.txt CMake/CMakeConfigurableFile.in		\
+CMake/CurlCheckCSourceCompiles.cmake CMake/CurlCheckCSourceRuns.cmake	\
+CMake/CurlTests.c CMake/FindOpenSSL.cmake CMake/FindZLIB.cmake		\
+CMake/OtherTests.cmake CMake/Platforms/WindowsCache.cmake		\
 CMake/Utilities.cmake include/curl/curlbuild.h.cmake
 
+WINBUILD_DIST = winbuild/BUILD.WINDOWS.txt winbuild/gen_resp_file.bat	\
+winbuild/MakefileBuild.vc winbuild/Makefile.vc
+
 EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in	\
  curl-style.el sample.emacs RELEASE-NOTES buildconf 	\
- libcurl.pc.in vc6curl.dsw MacOSX-Framework Android.mk $(CMAKE_DIST)
+ libcurl.pc.in vc6curl.dsw MacOSX-Framework Android.mk $(CMAKE_DIST)	\
+ Makefile.msvc.names $(WINBUILD_DIST)
 
 bin_SCRIPTS = curl-config
 

Makefile.dist

@@ -32,27 +32,27 @@ ssl:
 
 borland:
 	cd lib
-	make -f Makefile.b32
+	$(MAKE) -f Makefile.b32
 	cd ..\src
-	make -f Makefile.b32
+	$(MAKE) -f Makefile.b32
 
 borland-ssl:
 	cd lib
-	make -f Makefile.b32 WITH_SSL=1
+	$(MAKE) -f Makefile.b32 WITH_SSL=1
 	cd ..\src
-	make -f Makefile.b32 WITH_SSL=1
+	$(MAKE) -f Makefile.b32 WITH_SSL=1
 
 borland-ssl-zlib:
 	cd lib
-	make -f Makefile.b32 WITH_SSL=1 WITH_ZLIB=1
+	$(MAKE) -f Makefile.b32 WITH_SSL=1 WITH_ZLIB=1
 	cd ..\src
-	make -f Makefile.b32 WITH_SSL=1 WITH_ZLIB=1
+	$(MAKE) -f Makefile.b32 WITH_SSL=1 WITH_ZLIB=1
 
 borland-clean:
 	cd lib
-	make -f Makefile.b32 clean
+	$(MAKE) -f Makefile.b32 clean
 	cd ..\src
-	make -f Makefile.b32 clean
+	$(MAKE) -f Makefile.b32 clean
 
 watcom: .SYMBOLIC
 	cd lib && $(MAKE) -u -f Makefile.Watcom

Makefile.msvc.names

@@ -0,0 +1,81 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1999 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+#***************************************************************************
+
+#
+# This file is included from MSVC makefiles located in lib and src,
+# providing libcurl common file names required by these makefiles.
+#
+
+# ------------------
+# libcurl base name
+# ------------------
+
+!IF !DEFINED(LIB_NAME) || "$(LIB_NAME)" == ""
+LIB_NAME = libcurl
+!ENDIF
+
+# -------------------------------------------------
+# libcurl static and dynamic libraries common base
+# file names for release and debug configurations
+# -------------------------------------------------
+
+!IF !DEFINED(LIB_NAME_STA_REL) || "$(LIB_NAME_STA_REL)" == ""
+LIB_NAME_STA_REL = $(LIB_NAME)
+!ENDIF
+
+!IF !DEFINED(LIB_NAME_STA_DBG) || "$(LIB_NAME_STA_DBG)" == ""
+LIB_NAME_STA_DBG = $(LIB_NAME_STA_REL)d
+!ENDIF
+
+!IF !DEFINED(LIB_NAME_DYN_REL) || "$(LIB_NAME_DYN_REL)" == ""
+LIB_NAME_DYN_REL = $(LIB_NAME)
+!ENDIF
+
+!IF !DEFINED(LIB_NAME_DYN_DBG) || "$(LIB_NAME_DYN_DBG)" == ""
+LIB_NAME_DYN_DBG = $(LIB_NAME_DYN_REL)d
+!ENDIF
+
+# --------------------------------------------
+# Base names for libcurl DLL import libraries
+# --------------------------------------------
+
+!IF !DEFINED(LIB_NAME_IMP_REL) || "$(LIB_NAME_IMP_REL)" == ""
+LIB_NAME_IMP_REL = $(LIB_NAME_DYN_REL)_imp
+!ENDIF
+
+!IF !DEFINED(LIB_NAME_IMP_DBG) || "$(LIB_NAME_IMP_DBG)" == ""
+LIB_NAME_IMP_DBG = $(LIB_NAME_DYN_DBG)_imp
+!ENDIF
+
+# --------------------------------------
+# File names with extension and no path
+# --------------------------------------
+
+LIBCURL_STA_LIB_REL = $(LIB_NAME_STA_REL).lib
+LIBCURL_STA_LIB_DBG = $(LIB_NAME_STA_DBG).lib
+LIBCURL_DYN_LIB_REL = $(LIB_NAME_DYN_REL).dll
+LIBCURL_DYN_LIB_DBG = $(LIB_NAME_DYN_DBG).dll
+LIBCURL_IMP_LIB_REL = $(LIB_NAME_IMP_REL).lib
+LIBCURL_IMP_LIB_DBG = $(LIB_NAME_IMP_DBG).lib
+LIBCURL_DYN_LIB_PDB = $(LIB_NAME_IMP_DBG).pdb
+
+# End of Makefile.msvc.names

RELEASE-NOTES

@@ -1,51 +1,69 @@
-Curl and libcurl 7.21.3
+Curl and libcurl 7.21.5
 
- Public curl releases:         119
+ Public curl releases:         121
  Command line options:         143
  curl_easy_setopt() options:   185
  Public functions in libcurl:  58
  Known libcurl bindings:       39
- Contributors:                 827
+ Contributors:                 854
 
 This release includes the following changes:
 
- o Added --noconfigure switch to testcurl.pl
- o Added --xattr option
- o Added CURLOPT_RESOLVE and --resolve
- o Added CURLAUTH_ONLY
- o Added version-check.pl to the examples dir
+ o SOCKOPTFUNCTION: callback can say already-connected
+ o Added --netrc-file
+ o Added (new) support for cyassl
+ o TSL-SRP: enabled with OpenSSL
+ o Added CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION
 
 This release includes the following bugfixes:
 
- o check for libcurl features for some command line options
- o Curl_setopt: disallow CURLOPT_USE_SSL without SSL support
- o http_chunks: remove debug output
- o URL-parsing: consider ? a divider
- o SSH: avoid using the libssh2_ prefix
- o SSH: use libssh2_session_handshake() to work on win64
- o ftp: prevent server from hanging on closed data connection when stopping
-   a transfer before the end of the full transfer (ranges)
- o LDAP: detect non-binary attributes properly
- o ftp: treat server's response 421 as CURLE_OPERATION_TIMEDOUT
- o gnutls->handshake: improved timeout handling
- o security: Pass the right parameter to init
- o krb5: Use GSS_ERROR to check for error
- o TFTP: resend the correct data
- o configure: fix autoconf 2.68 warning: no AC_LANG_SOURCE call detected
- o GnuTLS: now detects socket errors on Windows
- o symbols-in-versions: updated en masse
- o added a couple examples that were missing from the tar ball
- o Curl_send/recv_plain: return errno on failure
- o Curl_wait_for_resolv (for c-ares): correct timeout
- o ossl_connect_common: detect connection re-use
- o configure: Prevent link errors with --librtmp
- o openldap: use remote port in URL passed to ldap_init_fd()
- o url: provide dead_connection flag in Curl_handler::disconnect
- o lots of compiler warning fixes
- o ssh: fix a download resume point calculation
- o fix getinfo CURLINFO_LOCAL* for reused connections
- o multi: the returned running handles conuter could turn negative
- o multi: only ever consider pipelining for connections doing HTTP(S)
+ o nss: avoid memory leak on SSL connection failure
+ o nss: do not ignore failure of SSL handshake
+ o multi: better failed connect handling when using FTP, SMTP, POP3 and IMAP
+ o runtests.pl: fix pid number concatenation that prevented it from killing
+   the correct process at times
+ o PolarSSL: Return 0 on receiving TLS CLOSE_NOTIFY alert
+ o curl_easy_setopt.3: Removed wrong reference to CURLOPT_USERPASSWORD
+ o multi: close connection on timeout
+ o IMAP in multi mode does SSL connections non-blocking
+ o honours the --disable-ldaps configure option
+ o Force setopt constants written by --libcurl to be long
+ o ssh_connect: treat libssh2 return code better
+ o SFTP upload could stall the state machine when the multi_socket API was
+   used
+ o SFTP and SCP could leak memory when used with the multi interface and 
+   the connection was closed
+ o Added missing file to repair the MSVC makefiles
+ o Fixed detection of recvfrom arguments on Android/bionic
+ o GSS: handle reuse fix
+ o transfer: avoid insane conversion of time_t
+ o nss: do not ignore value of CURLOPT_SSL_VERIFYPEER in certain cases
+ o SMTP-multi: non-blocking connect
+ o SFTP-multi: set cselect for sftp and scp to fix "stall" risk
+ o configure: removed wrongly claimed default paths
+ o pop3: fixed torture tests to succeed
+ o symbols-in-versions: many corrections
+ o if a HTTP request gets retried because the connection was dead, rewind if
+   any data was sent as part of it
+ o only probe for working ipv6 once and then re-use that info for further
+   requests
+ o requests that are asked to bound to a local interface/port will no longer
+   wrongly re-use connections that aren't
+ o libcurl.m4: Add missing quotes in AC_LINK_IFELSE
+ o progress output: don't print the last update on a separate line
+ o POP3: the command to send is STLS, not STARTTLS
+ o POP3: PASS command was not sent after upgrade to TLS
+ o configure: fix libtool warning
+ o nss: allow to use multiple client certificates for a single host
+ o HTTP pipelining: Fix handling of zero-length responses
+ o Don't list NTLM in curl-config when HTTP is disabled
+ o curl_easy_setopt.3: CURLOPT_RESOLVE typo version
+ o OpenSSL: build fine with no-sslv2 versions
+ o checkconnection: don't call with NULL pointer with RTSP and multi interface
+ o Borland makefile updates
+ o configure: libssh2 link fix without pkg-config
+ o certinfo crash
+ o CCC crash
 
 This release includes the following known bugs:
 
@@ -54,8 +72,10 @@ This release includes the following known bugs:
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Dan Fandrich, Guenter Knauf, Pat Ray, Hongli Lai, Kamil Dudka,
- Stefan Tomanek, Alfred Gebert, Yang Tse, Julien Chaffraix, Adam Light,
- Rutger Hofman, Matthias Bolte, Heinrich Ko, Dmitri Shubin
+ Mike Crowe, Kamil Dudka, Julien Chaffraix, Hoi-Ho Chan, Ben Noordhuis,
+ Dan Fandrich, Henry Ludemann, Karl M, Manuel Massing, Marcus Sundberg,
+ Stefan Krause, Todd A Ouska, Saqib Ali, Andre Guibert de Bruet,
+ Tor Arntsen, Vincent Torri, Dave Reisner, Chris Smowton, Tinus van den Berg,
+ Hongli Lai, Gisle Vanem, Andrei Benea, Mehmet Bozkurt
 
         Thanks! (and sorry if I forgot to mention someone)

TODO-RELEASE

@@ -1,10 +1,15 @@
-To be addressed in 7.21.3
+To be addressed in 7.21.6
 =========================
 
-263 - Support binding DNS to local interface/IP
+284 - bug 3172608 "No re-authentication when HTTP connecton is closed"
+      http://curl.haxx.se/bug/view.cgi?id=3172608
+      Would be nice if someone could verify the suggested patch
 
-265 - 1. FTP cmd channel and data channel validation
+285 - bug 3163118 "Allow programatic use of telnet on Windows"
+      http://curl.haxx.se/bug/view.cgi?id=3163118
+      Would appreciate a Windows developer to give it a look before we apply
+      the suggested patch
 
-267 - 2. Cert chain for data channel
+287 - bug 3215314 Post quote operation to rename fails in Windows
 
-271 -
+289 -

acinclude.m4

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -1663,7 +1663,7 @@ AC_DEFUN([CURL_CHECK_FUNC_RECVFROM], [
           for recvfrom_arg2 in 'char *' 'void *'; do
             for recvfrom_arg3 in 'size_t' 'int' 'socklen_t' 'unsigned int'; do
               for recvfrom_arg4 in 'int' 'unsigned int'; do
-                for recvfrom_arg5 in 'struct sockaddr *' 'void *'; do
+                for recvfrom_arg5 in 'const struct sockaddr *' 'struct sockaddr *' 'void *'; do
                   for recvfrom_arg6 in 'socklen_t *' 'int *' 'unsigned int *' 'size_t *' 'void *'; do
                     if test "$curl_cv_func_recvfrom_args" = "unknown"; then
                       AC_COMPILE_IFELSE([
@@ -3181,7 +3181,7 @@ AC_DEFUN([CURL_CHECK_WIN32_LARGEFILE], [
       ;;
     win32_small_files)
       AC_MSG_RESULT([yes (large file disabled)])
-      AC_DEFINE_UNQUOTED(USE_WIN32_LARGE_FILES, 1,
+      AC_DEFINE_UNQUOTED(USE_WIN32_SMALL_FILES, 1,
         [Define to 1 if you are building a Windows target without large file support.])
       ;;
     *)

configure.ac

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -29,12 +29,13 @@ AC_INIT([curl], [-], [a suitable curl mailing list: http://curl.haxx.se/mail/])
 CURL_OVERRIDE_AUTOCONF
 
 dnl configure script copyright
-AC_COPYRIGHT([Copyright (c) 1998 - 2010 Daniel Stenberg, <daniel@haxx.se>
+AC_COPYRIGHT([Copyright (c) 1998 - 2011 Daniel Stenberg, <daniel@haxx.se>
 This configure script may be copied, distributed and modified under the
 terms of the curl license; see COPYING for more details])
 
 AC_CONFIG_SRCDIR([lib/urldata.h])
 AM_CONFIG_HEADER(lib/curl_config.h src/curl_config.h include/curl/curlbuild.h)
+AC_CONFIG_MACRO_DIR([m4])
 AM_MAINTAINER_MODE
 
 CURL_CHECK_OPTION_DEBUG
@@ -120,10 +121,12 @@ if test -f ${srcdir}/include/curl/curlbuild.h; then
 fi
 
 dnl figure out the libcurl version
-VERSION=`$SED -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curlver.h`
-AM_INIT_AUTOMAKE(curl,$VERSION)
+CURLVERSION=`$SED -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curlver.h`
+AM_INIT_AUTOMAKE
 AC_MSG_CHECKING([curl version])
-AC_MSG_RESULT($VERSION)
+AC_MSG_RESULT($CURLVERSION)
+
+AC_SUBST(CURLVERSION)
 
 dnl
 dnl we extract the numerical version for curl-config only
@@ -140,12 +143,13 @@ AC_SUBST(PKGADD_VENDOR)
 
 dnl
 dnl initialize all the info variables
-    curl_ssl_msg="no      (--with-{ssl,gnutls,nss,polarssl} )"
+    curl_ssl_msg="no      (--with-{ssl,gnutls,nss,polarssl,cyassl,axtls} )"
     curl_ssh_msg="no      (--with-libssh2)"
    curl_zlib_msg="no      (--with-zlib)"
    curl_krb4_msg="no      (--with-krb4*)"
     curl_gss_msg="no      (--with-gssapi)"
  curl_spnego_msg="no      (--with-spnego)"
+curl_tls_srp_msg="no      (--enable-tls-srp)"
     curl_res_msg="default (--enable-ares / --enable-threaded-resolver)"
    curl_ipv6_msg="no      (--enable-ipv6)"
     curl_idn_msg="no      (--with-libidn)"
@@ -156,6 +160,7 @@ curl_verbose_msg="enabled (--disable-verbose)"
   curl_ldaps_msg="no      (--enable-ldaps)"
    curl_rtsp_msg="no      (--enable-rtsp)"
    curl_rtmp_msg="no      (--with-librtmp)"
+    init_ssl_msg=${curl_ssl_msg}
 
 dnl
 dnl Save anything in $LIBS for later
@@ -1630,6 +1635,17 @@ if test X"$OPENSSL_ENABLED" = X"1"; then
   fi
 fi
 
+dnl ---
+dnl We require OpenSSL with SRP support.
+dnl ---
+if test "$OPENSSL_ENABLED" = "1"; then
+  AC_CHECK_LIB(crypto, SRP_Calc_client_key,
+   [
+     AC_DEFINE(HAVE_SSLEAY_SRP, 1, [if you have the function SRP_Calc_client_key])
+     AC_SUBST(HAVE_SSLEAY_SRP, [1])
+   ])
+fi
+
 dnl ----------------------------------------------------
 dnl check for GnuTLS
 dnl ----------------------------------------------------
@@ -1638,7 +1654,7 @@ dnl Default to compiler & linker defaults for GnuTLS files & libraries.
 OPT_GNUTLS=no
 
 AC_ARG_WITH(gnutls,dnl
-AC_HELP_STRING([--with-gnutls=PATH],[where to look for GnuTLS, PATH points to the installation root (default: /usr/local/)])
+AC_HELP_STRING([--with-gnutls=PATH],[where to look for GnuTLS, PATH points to the installation root])
 AC_HELP_STRING([--without-gnutls], [disable GnuTLS detection]),
   OPT_GNUTLS=$withval)
 
@@ -1753,6 +1769,17 @@ if test "$GNUTLS_ENABLED" = "1"; then
     ])
 fi
 
+dnl ---
+dnl We require GnuTLS with SRP support.
+dnl ---
+if test "$GNUTLS_ENABLED" = "1"; then
+  AC_CHECK_LIB(gnutls, gnutls_srp_verifier,
+   [
+     AC_DEFINE(HAVE_GNUTLS_SRP, 1, [if you have the function gnutls_srp_verifier])
+     AC_SUBST(HAVE_GNUTLS_SRP, [1])
+   ])
+fi
+
 dnl ----------------------------------------------------
 dnl check for PolarSSL
 dnl ----------------------------------------------------
@@ -1763,7 +1790,7 @@ OPT_POLARSSL=no
 _cppflags=$CPPFLAGS
 _ldflags=$LDFLAGS
 AC_ARG_WITH(polarssl,dnl
-AC_HELP_STRING([--with-polarssl=PATH],[where to look for PolarSSL, PATH points to the installation root (default: /usr/local/)])
+AC_HELP_STRING([--with-polarssl=PATH],[where to look for PolarSSL, PATH points to the installation root])
 AC_HELP_STRING([--without-polarssl], [disable PolarSSL detection]),
   OPT_POLARSSL=$withval)
 
@@ -1837,6 +1864,95 @@ if test "$OPENSSL_ENABLED" != "1"; then
 
 fi dnl OPENSSL != 1
 
+dnl ----------------------------------------------------
+dnl check for CyaSSL
+dnl ----------------------------------------------------
+
+dnl Default to compiler & linker defaults for CyaSSL files & libraries.
+OPT_CYASSL=no
+
+_cppflags=$CPPFLAGS
+_ldflags=$LDFLAGS
+AC_ARG_WITH(cyassl,dnl
+AC_HELP_STRING([--with-cyassl=PATH],[where to look for CyaSSL, PATH points to the installation root (default: /usr/local/cyassl)])
+AC_HELP_STRING([--without-cyassl], [disable CyaSSL detection]),
+  OPT_CYASSL=$withval)
+
+if test "$OPENSSL_ENABLED" != "1"; then
+
+  if test X"$OPT_CYASSL" != Xno; then
+
+    if test "$OPT_CYASSL" = "yes"; then
+      OPT_CYASSL=""
+    fi
+
+    if test -z "$OPT_CYASSL" ; then
+      dnl check for lib in default first
+
+      trycyassldir="/usr/local/cyassl"
+
+      LDFLAGS="$LDFLAGS -L$trycyassldir/lib"
+      CPPFLAGS="$CPPFLAGS -I$trycyassldir/include"
+
+      AC_CHECK_LIB(cyassl, InitCyaSSL,
+      dnl libcyassl found, set the variable
+       [
+         AC_DEFINE(USE_CYASSL, 1, [if CyaSSL is enabled])
+         AC_SUBST(USE_CYASSL, [1])
+         CYASSL_ENABLED=1
+         USE_CYASSL="yes"
+         curl_ssl_msg="enabled (CyaSSL)"
+        ])
+    fi
+
+    if test "x$USE_CYASSL" != "xyes"; then
+      dnl add the path and test again
+      addld=-L$OPT_CYASSL/lib$libsuff
+      addcflags=-I$OPT_CYASSL/include
+      cyassllib=$OPT_CYASSL/lib$libsuff
+
+      LDFLAGS="$LDFLAGS $addld"
+      if test "$addcflags" != "-I/usr/include"; then
+         CPPFLAGS="$CPPFLAGS $addcflags"
+      fi
+
+      AC_CHECK_LIB(cyassl, InitCyaSSL,
+       [
+       AC_DEFINE(USE_CYASSL, 1, [if CyaSSL is enabled])
+       AC_SUBST(USE_CYASSL, [1])
+       CYASSL_ENABLED=1
+       USE_CYASSL="yes"
+       curl_ssl_msg="enabled (CyaSSL)"
+       ],
+       [
+         CPPFLAGS=$_cppflags
+         LDFLAGS=$_ldflags
+       ])
+    fi
+
+    if test "x$USE_CYASSL" = "xyes"; then
+      AC_MSG_NOTICE([detected CyaSSL])
+
+      CURL_LIBS="$CURL_LIBS -lcyassl -lm"
+      LIBS="$LIBS -lcyassl -lm"
+
+      if test -n "$cyassllib"; then
+        dnl when shared libs were found in a path that the run-time
+        dnl linker doesn't search through, we need to add it to
+        dnl LD_LIBRARY_PATH to prevent further configure tests to fail
+        dnl due to this
+
+        LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$cyassllib"
+        export LD_LIBRARY_PATH
+        AC_MSG_NOTICE([Added $cyassllib to LD_LIBRARY_PATH])
+      fi
+
+    fi
+
+  fi dnl CyaSSL not disabled
+
+fi dnl OPENSSL != 1
+
 dnl ----------------------------------------------------
 dnl NSS. Only check if GnuTLS and OpenSSL are not enabled
 dnl ----------------------------------------------------
@@ -1845,7 +1961,7 @@ dnl Default to compiler & linker defaults for NSS files & libraries.
 OPT_NSS=no
 
 AC_ARG_WITH(nss,dnl
-AC_HELP_STRING([--with-nss=PATH],[where to look for NSS, PATH points to the installation root (default: /usr/local/)])
+AC_HELP_STRING([--with-nss=PATH],[where to look for NSS, PATH points to the installation root])
 AC_HELP_STRING([--without-nss], [disable NSS detection]),
   OPT_NSS=$withval)
 
@@ -1933,9 +2049,64 @@ if test "$OPENSSL_ENABLED" != "1" -a "$GNUTLS_ENABLED" != "1"; then
 
 fi dnl OPENSSL != 1 -a GNUTLS_ENABLED != 1
 
-if test "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED$POLARSSL_ENABLED" = "x"; then
+OPT_AXTLS=off
+
+AC_ARG_WITH(axtls,dnl
+AC_HELP_STRING([--with-axtls=PATH],[Where to look for axTLS, PATH points to the axTLS installation prefix (default: /usr/local).  Ignored if another SSL engine is selected.])
+AC_HELP_STRING([--without-axtls], [disable axTLS]),
+  OPT_AXTLS=$withval)
+
+if test "$curl_ssl_msg" = "$init_ssl_msg"; then
+  if test X"$OPT_AXTLS" != Xno; then
+    dnl backup the pre-axtls variables
+    CLEANLDFLAGS="$LDFLAGS"
+    CLEANCPPFLAGS="$CPPFLAGS"
+    CLEANLIBS="$LIBS"
+
+    case "$OPT_AXTLS" in
+    yes)
+      dnl --with-axtls (without path) used
+      PREFIX_AXTLS=/usr/local
+      LIB_AXTLS="$PREFIX_AXTLS/lib"
+      LDFLAGS="$LDFLAGS -L$LIB_AXTLS"
+      CPPFLAGS="$CPPFLAGS -I$PREFIX_AXTLS/include"
+      ;;
+    off)
+      dnl no --with-axtls option given, just check default places
+      PREFIX_AXTLS=
+      ;;
+    *)
+      dnl check the given --with-axtls spot
+      PREFIX_AXTLS=$OPT_AXTLS
+      LIB_AXTLS="$PREFIX_AXTLS/lib"
+      LDFLAGS="$LDFLAGS -L$LIB_AXTLS"
+      CPPFLAGS="$CPPFLAGS -I$PREFIX_AXTLS/include"
+      ;;
+    esac
+
+    AC_CHECK_LIB(axtls, ssl_version,[
+      LIBS="-laxtls $LIBS"
+      AC_DEFINE(USE_AXTLS, 1, [if axTLS is enabled])
+      AC_SUBST(USE_AXTLS, [1])
+      AXTLS_ENABLED=1
+      USE_AXTLS="yes"
+      curl_ssl_msg="enabled (axTLS)"
+
+
+      LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$LIB_AXTLS"
+      export LD_LIBRARY_PATH
+      AC_MSG_NOTICE([Added $LIB_AXTLS to LD_LIBRARY_PATH])
+      ],[
+      LDFLAGS="$CLEANLDFLAGS"
+      CPPFLAGS="$CLEANCPPFLAGS"
+      LIBS="$CLEANLIBS"
+    ])
+  fi
+fi
+
+if test "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED$POLARSSL_ENABLED$AXTLS_ENABLED$CYASSL_ENABLED" = "x"; then
   AC_MSG_WARN([SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more.])
-  AC_MSG_WARN([Use --with-ssl, --with-gnutls, --with-polarssl or --with-nss to address this.])
+  AC_MSG_WARN([Use --with-ssl, --with-gnutls, --with-polarssl, --with-cyassl, --with-nss or --with-axtls to address this.])
 else
   # SSL is enabled, genericly
   AC_SUBST(SSL_ENABLED)
@@ -1955,7 +2126,7 @@ dnl **********************************************************************
 dnl Default to compiler & linker defaults for LIBSSH2 files & libraries.
 OPT_LIBSSH2=off
 AC_ARG_WITH(libssh2,dnl
-AC_HELP_STRING([--with-libssh2=PATH],[Where to look for libssh2, PATH points to the LIBSSH2 installation (default: /usr/local/lib); when possible, set the PKG_CONFIG_PATH environment variable instead of using this option])
+AC_HELP_STRING([--with-libssh2=PATH],[Where to look for libssh2, PATH points to the LIBSSH2 installation; when possible, set the PKG_CONFIG_PATH environment variable instead of using this option])
 AC_HELP_STRING([--without-libssh2], [disable LIBSSH2]),
   OPT_LIBSSH2=$withval)
 
@@ -1990,6 +2161,7 @@ if test X"$OPT_LIBSSH2" != Xno; then
 
   dnl if given with a prefix, we set -L and -I based on that
   if test -n "$PREFIX_SSH2"; then
+    LIB_SSH2="-lssh2"
     LD_SSH2=-L${PREFIX_SSH2}/lib$libsuff
     CPP_SSH2=-I${PREFIX_SSH2}/include
     DIR_SSH2=${PREFIX_SSH2}/lib$libsuff
@@ -2045,7 +2217,7 @@ dnl **********************************************************************
 dnl Default to compiler & linker defaults for LIBRTMP files & libraries.
 OPT_LIBRTMP=off
 AC_ARG_WITH(librtmp,dnl
-AC_HELP_STRING([--with-librtmp=PATH],[Where to look for librtmp, PATH points to the LIBRTMP installation (default: /usr/local/lib); when possible, set the PKG_CONFIG_PATH environment variable instead of using this option])
+AC_HELP_STRING([--with-librtmp=PATH],[Where to look for librtmp, PATH points to the LIBRTMP installation; when possible, set the PKG_CONFIG_PATH environment variable instead of using this option])
 AC_HELP_STRING([--without-librtmp], [disable LIBRTMP]),
   OPT_LIBRTMP=$withval)
 
@@ -2505,7 +2677,8 @@ AM_CONDITIONAL(USE_MANUAL, test x"$USE_MANUAL" = x1)
 CURL_CHECK_LIB_ARES
 AM_CONDITIONAL(USE_EMBEDDED_ARES, test x$embedded_ares = xyes)
 
-if test "x$enable_shared" = "xyes"; then
+if test "x$ac_cv_native_windows" != "xyes" &&
+   test "x$enable_shared" = "xyes"; then
   build_libhostname=yes
 else
   build_libhostname=no
@@ -2597,6 +2770,33 @@ AC_HELP_STRING([--disable-crypto-auth],[Disable cryptographic authentication]),
        AC_MSG_RESULT(yes)
 )
 
+dnl ************************************************************
+dnl disable TLS-SRP authentication
+dnl
+AC_MSG_CHECKING([whether to enable TLS-SRP authentication])
+AC_ARG_ENABLE(tls-srp,
+AC_HELP_STRING([--enable-tls-srp],[Enable TLS-SRP authentication])
+AC_HELP_STRING([--disable-tls-srp],[Disable TLS-SRP authentication]),
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_TLS_SRP, 1, [to disable TLS-SRP authentication])
+       want_tls_srp=no
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       want_tls_srp=yes
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+       want_tls_srp=yes
+)
+
+if test "$want_tls_srp" = "yes" && ( test "x$HAVE_GNUTLS_SRP" = "x1" || test "x$HAVE_SSLEAY_SRP" = "x1") ; then
+   AC_DEFINE(USE_TLS_SRP, 1, [Use TLS-SRP authentication])
+   USE_TLS_SRP=1
+   curl_tls_srp_msg="enabled"
+fi
+
 dnl ************************************************************
 dnl disable cookies support
 dnl
@@ -2741,9 +2941,14 @@ fi
 if test "x$USE_WINDOWS_SSPI" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES SSPI"
 fi
-if test "x$USE_SSLEAY" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" \
+if test "x$CURL_DISABLE_HTTP" != "x1"; then
+  if test "x$USE_SSLEAY" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" \
       -o "x$GNUTLS_ENABLED" = "x1" -o "x$NSS_ENABLED" = "x1"; then
     SUPPORT_FEATURES="$SUPPORT_FEATURES NTLM"
+  fi
+fi
+if test "x$USE_TLS_SRP" = "x1"; then
+  SUPPORT_FEATURES="$SUPPORT_FEATURES TLS-SRP"
 fi
 
 AC_SUBST(SUPPORT_FEATURES)
@@ -2854,6 +3059,7 @@ AC_CONFIG_FILES([Makefile \
            tests/data/Makefile \
            tests/server/Makefile \
            tests/libtest/Makefile \
+           tests/unit/Makefile \
            packages/Makefile \
            packages/Win32/Makefile \
            packages/Win32/cygwin/Makefile \
@@ -2877,7 +3083,7 @@ CURL_GENERATE_CONFIGUREHELP_PM
 
 AC_MSG_NOTICE([Configured to build curl/libcurl:
 
-  curl version:    ${VERSION}
+  curl version:    ${CURLVERSION}
   Host setup:      ${host}
   Install prefix:  ${prefix}
   Compiler:        ${CC}
@@ -2887,6 +3093,7 @@ AC_MSG_NOTICE([Configured to build curl/libcurl:
   krb4 support:    ${curl_krb4_msg}
   GSSAPI support:  ${curl_gss_msg}
   SPNEGO support:  ${curl_spnego_msg}
+  TLS-SRP support: ${curl_tls_srp_msg}
   resolver:        ${curl_res_msg}
   ipv6 support:    ${curl_ipv6_msg}
   IDN support:     ${curl_idn_msg}

docs/CONTRIBUTE

@@ -189,7 +189,7 @@
 
 3.2 How To Make a Patch with git
 
- You need to first checkout the respository:
+ You need to first checkout the repository:
 
      git clone git://github.com/bagder/curl.git
 
@@ -243,21 +243,20 @@
 
 3.4 How to get your changes into the main sources
 
- 1. Submit your patch to the curl-library mailing list
+ Submit your patch to the curl-library mailing list.
 
- 2. Make the patch against as recent sources as possible.
+ Make the patch against as recent sources as possible.
 
- 3. Make sure your patch adheres to the source indent and coding style of
-    already existing source code. Failing to do so just adds more work for me.
+ Make sure your patch adheres to the source indent and coding style of already
+ existing source code. Failing to do so just adds more work for me.
 
- 4. Respond to replies on the list about the patch and answer questions and/or
-    fix nits/flaws. This is very important. I will take lack of replies as a
-    sign that you're not very anxious to get your patch accepted and I tend to
-    simply drop such patches from my TODO list.
+ Respond to replies on the list about the patch and answer questions and/or
+ fix nits/flaws. This is very important. I will take lack of replies as a sign
+ that you're not very anxious to get your patch accepted and I tend to simply
+ drop such patches from my TODO list.
 
- 5. If you've followed the above mentioned paragraphs and your patch still
-    hasn't been incorporated after some weeks, consider resubmitting it to the
-    list.
+ If you've followed the above paragraphs and your patch still hasn't been
+ incorporated after some weeks, consider resubmitting it to the list.
 
 3.5 Write good commit messages
 

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: October 6, 2010 (http://curl.haxx.se/docs/faq.html)
+Updated: March 8, 2011 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _
                               ___| | | |  _ \| |
                              / __| | | | |_) | |
@@ -51,6 +51,8 @@ FAQ
   3.17 How do I list the root dir of an FTP server?
   3.18 Can I use curl to send a POST/PUT and not wait for a response?
   3.19 How do I get HTTP from a host using a specific IP address?
+  3.20 How to SFTP from my user's home directory?
+  3.21 Protocol xxx not supported or disabled in libcurl
 
  4. Running Problems
   4.1 Problems connecting to SSL servers.
@@ -107,7 +109,7 @@ FAQ
 
  7. PHP/CURL Issues
   7.1 What is PHP/CURL?
-  7.2 Who write PHP/CURL?
+  7.2 Who wrote PHP/CURL?
   7.3 Can I perform multiple requests using the same handle?
 
 ==============================================================================
@@ -446,10 +448,10 @@ FAQ
 
   2.2 Does curl work/build with other SSL libraries?
 
-  Curl has been written to use OpenSSL, GnuTLS, yassl, NSS or PolarSSL,
-  although there should not be many problems using a different library. If
-  anyone does "port" curl to use a different SSL library, we are of course
-  very interested in getting the patch!
+  Curl has been written to use OpenSSL, GnuTLS, yassl, NSS, PolarSSL, axTLS or
+  qssl, although there should not be many problems using a different
+  library. If anyone does "port" curl to use a different SSL library, we are
+  of course very interested in getting the patch!
 
   2.3 Where can I find a copy of LIBEAY32.DLL?
 
@@ -470,9 +472,13 @@ FAQ
   3.1 curl: (1) SSL is disabled, https: not supported
 
   If you get this output when trying to get anything from a https:// server,
-  it means that the configure script couldn't find all libs and include files
-  it requires for SSL to work. If the configure script fails to find them,
-  curl is simply built without SSL support.
+  it means that the instance of curl/libcurl that you're using was built
+  without support for this protocol.
+
+  This could've happened if the configure script that was run at build time
+  couldn't find all libs and include files curl requires for SSL to work. If
+  the configure script fails to find them, curl is simply built without SSL
+  support.
 
   To get the https:// support into a curl that was previously built but that
   reports that https:// is not supported, you should dig through the document
@@ -715,6 +721,35 @@ FAQ
 
     curl --header "Host: www.example.com" http://127.0.0.1/
 
+  3.20 How to SFTP from my user's home directory?
+
+  Contrary to how FTP works, SFTP and SCP URLs specify the exact directory to
+  work with. It means that if you don't specify that you want the user's home
+  directory, you get the actual root directory.
+
+  To specify a file in your user's home directory, you need to use the correct
+  URL syntax which for sftp might look similar to:
+
+    curl -O -u user:password sftp://example.com/~/file.txt
+
+  and for SCP it is just a different protocol prefix:
+
+    curl -O -u user:password scp://example.com/~/file.txt
+
+  3.21 Protocol xxx not supported or disabled in libcurl
+
+  When passing on a URL to curl to use, it may respond that the particular
+  protocol is not supported or disabled. The particular way this error message
+  is phrased is because curl doesn't make a distinction internally of whether
+  a particular protocol is not supported (ie never got any code added that
+  knows how to speak that protocol) or if it was explicitly disabled. curl can
+  be built to only support a given set of protocols, and the rest would then
+  be disabled or not supported.
+
+  Note that this error will also occur if you pass a wrongly spelled protocol
+  part as in "htpt://example.com" or as in the less evident case if you prefix
+  the protocol part with a space as in " http://example.com/".
+
 
 4. Running Problems
 
@@ -1145,7 +1180,6 @@ FAQ
        MSVC (debug):    libcurld.lib  libcurld_imp.lib
        Borland:         libcurl.lib   libcurl_imp.lib
 
-
   5.8 libcurl.so.X: open failed: No such file or directory
 
   This is an error message you might get when you try to run a program linked
@@ -1186,8 +1220,7 @@ FAQ
   - The ipv6-resolver that uses getaddrinfo()
 
   - The c-ares based name resolver that uses the c-ares library for resolves.
-    Using this offers asynchronous name resolves but it currently has no IPv6
-    support.
+    Using this offers asynchronous name resolves.
 
   - The threaded resolver (default option on Windows). It uses:
 
@@ -1224,16 +1257,18 @@ FAQ
 
   5.13 How do I stop an ongoing transfer?
 
-  There are several ways, but none of them are instant. There is no function
-  you can call from another thread or similar that will stop it immediately.
+  With the easy interface you make sure to return the correct error code from
+  one of the callbacks, but none of them are instant. There is no function you
+  can call from another thread or similar that will stop it immediately.
   Instead you need to make sure that one of the callbacks you use return an
   appropriate value that will stop the transfer.
 
   Suitable callbacks that you can do this with include the progress callback,
   the read callback and the write callback.
 
-  If you're using the multi interface, you also stop a transfer by removing
-  the particular easy handle from the multi stack.
+  If you're using the multi interface, you can also stop a transfer by
+  removing the particular easy handle from the multi stack. At any moment you
+  think the transfer is done.
 
   5.14 Using C++ non-static functions for callbacks?
 
@@ -1243,14 +1278,14 @@ FAQ
   member function that is passed a pointer to the class:
 
      // f is the pointer to your object.
-     static YourClass::staticFunction(void *buffer, size_t sz, size_t n, void *f)
+     static YourClass::func(void *buffer, size_t sz, size_t n, void *f)
      {
        // Call non-static member function.
        static_cast<YourClass*>(f)->nonStaticFunction();
      }
 
      // This is how you pass pointer to the static function:
-     curl_easy_setopt(hcurl, CURLOPT_WRITEFUNCTION, YourClass:staticFunction);
+     curl_easy_setopt(hcurl, CURLOPT_WRITEFUNCTION, YourClass:func);
      curl_easy_setopt(hcurl, CURLOPT_WRITEDATA, this);
 
   5.15 How do I get an FTP directory listing?
@@ -1345,12 +1380,16 @@ FAQ
   You do not have to reveal or make public any changes to the libcurl source
   code.
 
-  You do not have to reveal or make public that you are using libcurl within
+  You do not have to broadcast to the world that you are using libcurl within
   your app.
 
-  As can be seen here: http://curl.haxx.se/docs/companies.html and
-  elsewhere, more and more companies are discovering the power
-  of libcurl and take advantage of it even in commercial environments.
+  All we ask is that you disclose "the copyright notice and this permission
+  notice" somewhere. Most probably like in the documentation or in the section
+  where other third party dependencies already are mentioned and acknowledged.
+
+  As can be seen here: http://curl.haxx.se/docs/companies.html and elsewhere,
+  more and more companies are discovering the power of libcurl and take
+  advantage of it even in commercial environments.
 
 
 7. PHP/CURL Issues
@@ -1366,7 +1405,7 @@ FAQ
   CURL (often using all caps) or sometimes ext/curl, but both cause much
   confusion to users which in turn gives us a higher question load.
 
-  7.2 Who write PHP/CURL?
+  7.2 Who wrote PHP/CURL?
 
   PHP/CURL is a module that comes with the regular PHP package. It depends and
   uses libcurl, so you need to have libcurl installed properly first before

docs/FEATURES

@@ -125,7 +125,7 @@ FILE
 FOOTNOTES
 =========
 
-  *1 = requires OpenSSL, GnuTLS, NSS, yassl or PolarSSL
+  *1 = requires OpenSSL, GnuTLS, NSS, yassl, axTLS or PolarSSL
   *2 = requires OpenLDAP
   *3 = requires a GSSAPI-compliant library, such as Heimdal or similar.
   *4 = requires FBopenssl

docs/INSTALL

@@ -142,6 +142,9 @@ UNIX
      To build with PolarSSL support instead of OpenSSL for SSL/TLS, note that
      you need to use both --without-ssl and --with-polarssl.
 
+     To build with axTLS support instead of OpenSSL for TLS, note that you
+     need to use both --without-ssl and --with-axtls.
+
      To get GSSAPI support, build with --with-gssapi and have the MIT or
      Heimdal Kerberos 5 packages installed.
 
@@ -208,9 +211,9 @@ Win32
    adjust as necessary. It is also possible to override these paths with
    environment variables, for example:
 
-     set ZLIB_PATH=c:\zlib-1.2.3
-     set OPENSSL_PATH=c:\openssl-0.9.8k
-     set LIBSSH2_PATH=c:\libssh2-1.1
+     set ZLIB_PATH=c:\zlib-1.2.5
+     set OPENSSL_PATH=c:\openssl-0.9.8r
+     set LIBSSH2_PATH=c:\libssh2-1.2.7
 
    ATTENTION: if you want to build with libssh2 support you have to use latest
    version 0.17 - previous versions will NOT work with 7.17.0 and later!
@@ -229,7 +232,7 @@ Win32
 
    If you want to enable LDAPS support then set LDAPS=1.
 
-   - optional MingW32-built OpenlDAP SDK available from:
+   - optional MingW32-built OpenLDAP SDK available from:
      http://www.gknw.net/mirror/openldap/
    - optional recent Novell CLDAP SDK available from:
      http://developer.novell.com/ndk/cldap.htm
@@ -311,7 +314,7 @@ Win32
    documentation on how to compile zlib. Define the ZLIB_PATH environment
    variable to the location of zlib.h and zlib.lib, for example:
 
-     set ZLIB_PATH=c:\zlib-1.2.3
+     set ZLIB_PATH=c:\zlib-1.2.5
 
    Then run 'nmake vc-zlib' in curl's root directory.
 
@@ -325,7 +328,7 @@ Win32
    Before running nmake define the OPENSSL_PATH environment variable with
    the root/base directory of OpenSSL, for example:
 
-     set OPENSSL_PATH=c:\openssl-0.9.8k
+     set OPENSSL_PATH=c:\openssl-0.9.8q
 
    Then run 'nmake vc-ssl' or 'nmake vc-ssl-dll' in curl's root
    directory.  'nmake vc-ssl' will create a libcurl static and dynamic
@@ -374,30 +377,49 @@ Win32
    Borland C++ compiler
    ---------------------
 
-   compile openssl
+   Ensure that your build environment is properly set up to use the compiler
+   and associated tools. PATH environment variable must include the path to
+   bin subdirectory of your compiler installation, eg: c:\Borland\BCC55\bin
 
-   Make sure you include the paths to curl/include and openssl/inc32 in
-   your bcc32.cnf file
+   It is advisable to set environment variable BCCDIR to the base path of
+   the compiler installation.
 
-   eg : -I"c:\Bcc55\include;c:\path_curl\include;c:\path_openssl\inc32"
+     set BCCDIR=c:\Borland\BCC55
 
-   Check to make sure that all of the sources listed in lib/Makefile.b32
-   are present in the /path_to_curl/lib directory. (Check the src
-   directory for missing ones.)
+   In order to build a plain vanilla version of curl and libcurl run the 
+   following command from curl's root directory:
 
-   Make sure the environment variable "BCCDIR" is set to the install
-   location for the compiler eg : c:\Borland\BCC55
+     make borland
 
-   command line:
-   make -f /path_to_curl/lib/Makefile-ssl.b32
+   To build curl and libcurl with zlib and OpenSSL support set environment
+   variables ZLIB_PATH and OPENSSL_PATH to the base subdirectories of the
+   already built zlib and OpenSSL libraries and from curl's root directory
+   run command:
 
-   compile simplessl.c with appropriate links
+     make borland-ssl-zlib
+
+   libcurl library will be built in 'lib' subdirectory while curl tool
+   is built in 'src' subdirectory. In order to use libcurl library it is
+   advisable to modify compiler's configuration file bcc32.cfg located
+   in c:\Borland\BCC55\bin to reflect the location of libraries include
+   paths for example the '-I' line could result in something like:
+
+     -I"c:\Borland\BCC55\include;c:\curl\include;c:\openssl\inc32"
+
+   bcc3.cfg '-L' line could also be modified to reflect the location of
+   of libcurl library resulting for example:
+
+     -L"c:\Borland\BCC55\lib;c:\curl\lib;c:\openssl\out32"
+
+   In order to build sample program 'simple.c' from the docs\examples
+   subdirectory run following command from mentioned subdirectory:
+
+     bcc32 simple.c libcurl.lib cw32mt.lib
+
+   In order to build sample program simplessl.c an SSL enabled libcurl
+   is required, as well as the OpenSSL libeay32.lib and ssleay32.lib
+   libraries.
 
-   c:\curl\docs\examples\> bcc32 -L c:\path_to_curl\lib\libcurl.lib
-                                 -L c:\borland\bcc55\lib\psdk\ws2_32.lib
-                                 -L c:\openssl\out32\libeay32.lib
-                                 -L c:\openssl\out32\ssleay32.lib
-                                 simplessl.c
 
    OTHER MSVC IDEs
    ---------------
@@ -638,7 +660,7 @@ NetWare
    Builds automatically created 8 times a day from current git are here:
    http://www.gknw.net/mirror/curl/autobuilds/
    the status of these builds can be viewed at the autobuild table:
-   http://curl.haxx.se/auto/
+   http://curl.haxx.se/dev/builds.html
 
 
 eCos
@@ -882,9 +904,9 @@ REDUCING SIZE
    .comment section).
 
    Using these techniques it is possible to create a basic HTTP-only shared
-   libcurl library for i386 Linux platforms that is only 98 KiB in size, and
-   an FTP-only library that is 94 KiB in size (as of libcurl version 7.20.0,
-   using gcc 4.3.3).
+   libcurl library for i386 Linux platforms that is only 101 KiB in size, and
+   an FTP-only library that is 105 KiB in size (as of libcurl version 7.21.5,
+   using gcc 4.4.3).
 
    You may find that statically linking libcurl to your application will
    result in a lower total size than dynamically linking.
@@ -980,17 +1002,21 @@ PORTS
 Useful URLs
 ===========
 
-c-ares    http://daniel.haxx.se/projects/c-ares/license.html
+axTLS        http://axtls.sourceforge.net/
+c-ares       http://c-ares.haxx.se/
 GNU GSS      http://www.gnu.org/software/gss/
 GnuTLS       http://www.gnu.org/software/gnutls/
 Heimdal      http://www.pdc.kth.se/heimdal/
 libidn       http://www.gnu.org/software/libidn/
-libssh2   http://www.libssh2.org
-MingW     http://www.mingw.org
+libssh2      http://www.libssh2.org/
 MIT Kerberos http://web.mit.edu/kerberos/www/dist/
 NSS          http://www.mozilla.org/projects/security/pki/nss/
-OpenLDAP  http://www.openldap.org
-OpenSSL   http://www.openssl.org
-PolarSSL  http://polarssl.org
+OpenLDAP     http://www.openldap.org/
+OpenSSL      http://www.openssl.org/
+PolarSSL     http://polarssl.org/
 yassl        http://www.yassl.com/
-Zlib      http://www.gzip.org/zlib/
+Zlib         http://www.zlib.net/
+
+MingW        http://www.mingw.org/
+MinGW-w64    http://mingw-w64.sourceforge.net/
+OpenWatcom   http://www.openwatcom.org/

docs/INTERNALS

@@ -15,7 +15,7 @@ INTERNALS
 GIT
 ===
  All changes to the sources are committed to the git repository as soon as
- they're somewhat verified to work. Changes shall be commited as independently
+ they're somewhat verified to work. Changes shall be committed as independently
  as possible so that individual changes can be easier spotted and tracked
  afterwards.
 
@@ -39,11 +39,12 @@ Portability
  libssh2      0.16
  c-ares       1.6.0
  libidn       0.4.1
- *yassl       1.4.0 (http://curl.haxx.se/mail/lib-2008-02/0093.html)
+ cyassl       1.4.0
  openldap     2.0
  MIT krb5 lib 1.2.4
  qsossl       V5R2M0
  NSS          3.11.x
+ axTLS        1.2.7
  Heimdal      ?
 
  * = only partly functional, but that's due to bugs in the third party lib, not
@@ -90,7 +91,7 @@ Windows vs Unix
    do it etc there might be reasons for applications to alter that behaviour.
 
  3. The file descriptors for network communication and file operations are
-    not easily interchangable as in unix.
+    not easily interchangeable as in unix.
 
    We avoid this by not trying any funny tricks on file descriptors.
 
@@ -182,7 +183,7 @@ Library
 
    Some time during the DO function, the Curl_setup_transfer() function must
    be called with some basic info about the upcoming transfer: what socket(s)
-   to read/write and the expected file tranfer sizes (if known).
+   to read/write and the expected file transfer sizes (if known).
 
  o Transfer()
 
@@ -224,15 +225,15 @@ Library
  A quick roundup on internal function sequences (many of these call
  protocol-specific function-pointers):
 
-  curl_connect - connects to a remote site and does initial connect fluff
+  Curl_connect - connects to a remote site and does initial connect fluff
    This also checks for an existing connection to the requested site and uses
    that one if it is possible.
 
-   curl_do - starts a transfer
-    curl_transfer() - transfers data
-   curl_done - ends a transfer
+   Curl_do - starts a transfer
+    Curl_handler::do_it() - transfers data
+   Curl_done - ends a transfer
 
-  curl_disconnect - disconnects from a remote site. This is called when the
+  Curl_disconnect - disconnects from a remote site. This is called when the
    disconnect is really requested, which doesn't necessarily have to be
    exactly after curl_done in case we want to keep the connection open for
    a while.
@@ -249,16 +250,16 @@ Library
  HTTPS uses in almost every means the same procedure as HTTP, with only two
  exceptions: the connect procedure is different and the function used to read
  or write from the socket is different, although the latter fact is hidden in
- the source by the use of curl_read() for reading and curl_write() for writing
+ the source by the use of Curl_read() for reading and Curl_write() for writing
  data to the remote server.
 
  http_chunks.c contains functions that understands HTTP 1.1 chunked transfer
  encoding.
 
- An interesting detail with the HTTP(S) request, is the add_buffer() series of
- functions we use. They append data to one single buffer, and when the
- building is done the entire request is sent off in one single write. This is
- done this way to overcome problems with flawed firewalls and lame servers.
+ An interesting detail with the HTTP(S) request, is the Curl_add_buffer()
+ series of functions we use. They append data to one single buffer, and when
+ the building is done the entire request is sent off in one single write. This
+ is done this way to overcome problems with flawed firewalls and lame servers.
 
  FTP
 
@@ -284,14 +285,14 @@ Library
 
  LDAP
 
- Everything LDAP is in lib/ldap.c.
+ Everything LDAP is in lib/ldap.c and lib/openldap.c
 
  GENERAL
 
  URL encoding and decoding, called escaping and unescaping in the source code,
  is found in lib/escape.c.
 
- While transfering data in Transfer() a few functions might get used.
+ While transferring data in Transfer() a few functions might get used.
  curl_getdate() in lib/parsedate.c is for HTTP date comparisons (and more).
 
  lib/getenv.c offers curl_getenv() which is for reading environment variables
@@ -303,7 +304,7 @@ Library
  lib/netrc.c holds the .netrc parser
 
  lib/timeval.c features replacement functions for systems that don't have
- gettimeofday() and a few support functions for timeval convertions.
+ gettimeofday() and a few support functions for timeval conversions.
 
  A function named curl_version() that returns the full curl version string is
  found in lib/version.c.
@@ -356,8 +357,10 @@ multi interface/non-blocking
 
  The FTP and the SFTP/SCP protocols are thus perfect examples of how we adapt
  and adjust the code to allow non-blocking operations even on multi-stage
- protocols. The DICT, LDAP and TELNET are crappy examples and they are subject
- for rewrite in the future to better fit the libcurl protocol family.
+ protocols. They are built around state machines that return when they could
+ block waiting for data.  The DICT, LDAP and TELNET protocols are crappy
+ examples and they are subject for rewrite in the future to better fit the
+ libcurl protocol family.
 
 SSL libraries
 =============
@@ -379,7 +382,9 @@ Library Symbols
  All symbols used internally in libcurl must use a 'Curl_' prefix if they're
  used in more than a single file. Single-file symbols must be made static.
  Public ("exported") symbols must use a 'curl_' prefix. (There are exceptions,
- but they are to be changed to follow this pattern in future versions.)
+ but they are to be changed to follow this pattern in future versions.) Public
+ API functions are marked with CURL_EXTERN in the public header files so that
+ all others can be hidden on platforms where this is possible.
 
 Return Codes and Informationals
 ===============================
@@ -458,31 +463,43 @@ Memory Debugging
 Test Suite
 ==========
 
- Since November 2000, a test suite has evolved. It is placed in its own
- subdirectory directly off the root in the curl archive tree, and it contains
- a bunch of scripts and a lot of test case data.
+ The test suite is placed in its own subdirectory directly off the root in the
+ curl archive tree, and it contains a bunch of scripts and a lot of test case
+ data.
 
- The main test script is runtests.pl that will invoke the two servers
+ The main test script is runtests.pl that will invoke test servers like
  httpserver.pl and ftpserver.pl before all the test cases are performed. The
  test suite currently only runs on unix-like platforms.
 
- You'll find a complete description of the test case data files in the
- tests/README file.
+ You'll find a description of the test suite in the tests/README file, and the
+ test case data files in the tests/FILEFORMAT file.
 
  The test suite automatically detects if curl was built with the memory
- debugging enabled, and if it was it will detect memory leaks too.
+ debugging enabled, and if it was it will detect memory leaks, too.
 
 Building Releases
 =================
 
  There's no magic to this. When you consider everything stable enough to be
- released, run the 'maketgz' script (using 'make distcheck' will give you a
- pretty good view on the status of the current sources). maketgz prompts for
- version number of the client and the library before it creates a release
- archive. maketgz uses 'make dist' for the actual archive building, why you
- need to fill in the Makefile.am files properly for which files that should
- be included in the release archives.
+ released, do this:
 
- NOTE: you need to have curl checked out from git to be able to do a proper
+   1. Tag the source code accordingly.
+
+   2. run the 'maketgz' script (using 'make distcheck' will give you a pretty
+      good view on the status of the current sources). maketgz requires a
+      version number and creates the release archive. maketgz uses 'make dist'
+      for the actual archive building, why you need to fill in the Makefile.am
+      files properly for which files that should be included in the release
+      archives.
+
+   3. When that's complete, sign the output files.
+
+   4. Upload
+
+   5. Update web site and changelog on site
+
+   6. Send announcement to the mailing lists
+
+ NOTE: you must have curl checked out from git to be able to do a proper
  release build. The release tarballs do not have everything setup in order to
  do releases properly.

docs/LICENSE-MIXING

@@ -55,6 +55,10 @@ NSS     http://www.mozilla.org/projects/security/pki/nss/
         grant you different permissions and impose different obligations. You
         should select the license that best meets your needs.
 
+axTLS   http://axtls.sourceforge.net/
+
+        (May be used for SSL/TLS support) Uses a Modified BSD-style license.
+
 c-ares  http://daniel.haxx.se/projects/c-ares/license.html
 
         (Used for asynchronous name resolves) Uses an MIT license that is very

docs/MAIL-ETIQUETTE

@@ -0,0 +1,213 @@
+                                  _   _ ____  _
+                              ___| | | |  _ \| |
+                             / __| | | | |_) | |
+                            | (__| |_| |  _ <| |___
+                             \___|\___/|_| \_\_____|
+
+MAIL ETIQUETTE
+
+ 1. About the lists
+  1.1 Mailing Lists
+  1.2 Netiquette
+  1.3 Do Not Mail a Single Individual
+  1.4 Subscription Required
+  1.5 Moderation of new posters
+  1.6 Handling trolls and spam
+
+ 2. Sending mail
+  2.1 Reply or New Mail
+  2.2 Reply to the List
+  2.3 Use a Sensible Subject
+  2.4 Do Not Top-Post
+  2.5 HTML is not for mails
+  2.6 Quoting
+  2.7 Digest
+  2.8 Please Tell Us How You Solved The Problem!
+
+==============================================================================
+
+1. About the lists
+
+  1.1 Mailing Lists
+
+  The mailing lists we have are all listed and described at
+  http://curl.haxx.se/mail/
+
+  Each mailing list is targeted to a specific set of users and subjects,
+  please use the one or the ones that suit you the most.
+
+  Each mailing list have hundreds up to thousands of readers, meaning that
+  each mail sent will be received and read by a very large amount of people.
+  People from various cultures, regions, religions and continents.
+
+  1.2 Netiquette
+
+  Netiquette is a common name for how to behave on the internet. Of course, in
+  each particular group and subculture there will be differences in what is
+  acceptable and what is considered good manners.
+
+  This document outlines what we in the cURL project considers to be good
+  etiquette, and primarily this focus on how to behave on and how to use our
+  mailing lists.
+
+  1.3 Do Not Mail a Single Individual
+
+  Many people send one question to one person. One person gets many mails, and
+  there is only one person who can give you a reply. The question may be
+  something that other people are also wanting to ask. These other people have
+  no way to read the reply, but to ask the one person the question. The one
+  person consequently gets overloaded with mail.
+
+  If you really want to contact an individual and perhaps pay for his or her's
+  services, by all means go ahead, but if it's just another curl question,
+  take it to a suitable list instead.
+
+  1.4 Subscription Required
+
+  All curl mailing lists require that you are subscribed to allow a mail to go
+  through to all the subscribers.
+
+  If you post without being subscribed (or from a different mail address than
+  the one you are subscribed with), your mail will simply be silently
+  discarded. You have to subscribe first, then post.
+
+  The reason for this unfortunate and strict subscription policy is of course
+  to stop spam from pestering the lists.
+
+  1.5 Moderation of new posters
+
+  Several of the curl mailing lists automatically make all posts from new
+  subscribers require moderation. This means that after you've subscribed and
+  send your first mail to a list, that mail will not be let through to the
+  list until a mailing list administrator has verified that it is OK and
+  permits it to get posted.
+
+  Once a first post has been made that proves the sender is actually talking
+  about curl-related subjects, the moderation "flag" will be switched off and
+  future posts will go through without being moderated.
+
+  The reason for this moderation policy is that we do suffer from spammers who
+  actually subscribe and send spam to our lists.
+
+  1.6 Handling trolls and spam
+
+  Despite our good intensions and hard work to keep spam off the lists and to
+  maintain a friendly and positive atmosphere, there will be times when spam
+  and or trolls get through.
+
+  Troll - "someone who posts inflammatory, extraneous, or off-topic messages
+  in an online community"
+
+  Spam - "use of electronic messaging systems to send unsolicited bulk
+  messages"
+
+  No matter what, we NEVER EVER respond to trolls or spammers on the list. If
+  you believe the list admin should do something particular, contact him/her
+  off-list. The subject will be taken care of as good as possible to prevent
+  repeated offences, but responding on the list to such messages never lead to
+  anything good and only puts the light even more on the offender: which was
+  the entire purpose of it getting to the list in the first place.
+
+  Don't feed the trolls!
+
+
+2. Sending mail
+
+  2.1 Reply or New Mail
+
+  Please do not reply to an existing message as a short-cut to post a message
+  to the lists.
+
+  Many mail programs and web archivers use information within mails to keep
+  them together as "threads", as collections of posts that discuss a certain
+  subject. If you don't intend to reply on the same or similar subject, don't
+  just hit reply on an existing mail and change subject, create a new mail.
+
+  2.2 Reply to the List
+
+  When replying to a message from the list, make sure that you do "group
+  reply" or "reply to all", and not just reply to the author of the single
+  mail you reply to.
+
+  We're actively discouraging replying back to the single person by setting
+  the Reply-To: field in outgoing mails back to the mailing list address,
+  making it harder for people to mail the author only by mistake.
+
+  2.3 Use a Sensible Subject
+
+  Please use a subject of the mail that makes sense and that is related to the
+  contents of your mail. It makes it a lot easier to find your mail afterwards
+  and it makes it easier to track mail threads and topics.
+
+  2.4 Do Not Top-Post
+
+  If you reply to a message, don't use top-posting. Top-posting is when you
+  write the new text at the top of a mail and you insert the previous quoted
+  mail conversation below. It forces users to read the mail in a backwards
+  order to properly understand it.
+
+  This is why top posting is so bad:
+
+      A: Because it messes up the order in which people normally read
+         text.
+      Q: Why is top-posting such a bad thing?
+      A: Top-posting.
+      Q: What is the most annoying thing in e-mail?
+
+  Apart from the screwed up read order (especially when mixed together in a
+  thread when some responds doing the mandaded bottom-posting style), it also
+  makes it impossible to quote only parts of the original mail.
+
+  When you reply to a mail. You let the mail client insert the previous mail
+  quoted. Then you put the cursor on the first line of the mail and you move
+  down through the mail, deleting all parts of the quotes that don't add
+  context for your comments. When you want to add a comment you do so, inline,
+  right after the quotes that relate to your comment. Then you continue
+  downwards again.
+
+  When most of the quotes have been removed and you've added your own words,
+  you're done!
+
+  2.5 HTML is not for mails
+
+  Please switch off those HTML encoded messages. You can mail all those funny
+  mails to your friends. We speak plain text mails.
+
+  2.6 Quoting
+
+  Quote as little as possible. Just enough to provide the context you cannot
+  leave out. A lengthy description can be found here:
+
+      http://www.netmeister.org/news/learn2quote.html
+
+  2.7 Digest
+
+  We allow subscribers to subscribe to the "digest" version of the mailing
+  lists. A digest is a collection of mails lumped together in one single mail.
+
+  Should you decide to reply to a mail sent out as a digest, there are two
+  things you MUST consider if you really really cannot subscribe normally
+  instead:
+
+  Cut off all mails and chatter that is not related to the mail you want to
+  reply to.
+
+  Change the subject name to something sensible and related to the subject,
+  preferably even the actual subject of the single mail you wanted to reply to
+
+  2.8 Please Tell Us How You Solved The Problem!
+
+  Many people mail questions to the list, people spend some of their time and
+  make an effort in providing good answers to these questions.
+
+  If you are the one who asks, please consider responding once more in case
+  one of the hints was what solved your problems. The guys who write answers
+  feel good to know that they provided a good answer and that you fixed the
+  problem. Far too often, the person who asked the question is never heard of
+  again, and we never get to know if he/she is gone because the problem was
+  solved or perhaps because the problem was unsolvable!
+
+  Getting the solution posted also helps other users that experience the same
+  problem(s). They get to see (possibly in the web archives) that the
+  suggested fixes actually has helped at least one person.
+

docs/MANUAL

@@ -123,7 +123,13 @@ USING PASSWORDS
 
 PROXY
 
- Get an ftp file using a proxy named my-proxy that uses port 888:
+ curl supports both HTTP and SOCKS proxy servers, with optional authentication.
+ It does not have special support for FTP proxy servers since there are no
+ standards for those, but it can still be made to work with many of them. You
+ can also use both HTTP and SOCKS proxies to transfer files to and from FTP
+ servers.
+
+ Get an ftp file using an HTTP proxy named my-proxy that uses port 888:
 
         curl -x my-proxy:888 ftp://ftp.leachsite.com/README
 
@@ -146,9 +152,23 @@ PROXY
 
  curl also supports SOCKS4 and SOCKS5 proxies with --socks4 and --socks5.
 
- See also the environment variables Curl support that offer further proxy
+ See also the environment variables Curl supports that offer further proxy
  control.
 
+ Most FTP proxy servers are set up to appear as a normal FTP server from the
+ client's perspective, with special commands to select the remote FTP server.
+ curl supports the -u, -Q and --ftp-account options that can be used to
+ set up transfers through many FTP proxies. For example, a file can be
+ uploaded to a remote FTP server using a Blue Coat FTP proxy with the
+ options:
+
+   curl -u "Remote-FTP-Username@remote.ftp.server Proxy-Username:Remote-Pass" \
+    --ftp-account Proxy-Password --upload-file local-file \
+    ftp://my-ftp.proxy.server:21/remote/upload/path/
+
+ See the manual for your FTP proxy to determine the form it expects to set up
+ transfers, and curl's -v option to see exactly what curl is sending.
+
 RANGES
 
   With HTTP 1.1 byte-ranges were introduced. Using this, a client can request

docs/Makefile.am

@@ -1,5 +1,24 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
 #
+# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
 
 AUTOMAKE_OPTIONS = foreign no-dependencies
 
@@ -16,7 +35,8 @@ CLEANFILES = $(GENHTMLPAGES) $(PDFPAGES)
 EXTRA_DIST = MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS SSLCERTS	 \
  README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS VERSIONS	 \
  KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) HISTORY INSTALL		 \
- $(PDFPAGES) LICENSE-MIXING README.netware DISTRO-DILEMMA INSTALL.devcpp
+ $(PDFPAGES) LICENSE-MIXING README.netware DISTRO-DILEMMA INSTALL.devcpp \
+ MAIL-ETIQUETTE
 
 MAN2HTML= roffit < $< >$@
 

docs/THANKS

@@ -30,8 +30,10 @@ Alexey Borzov
 Alexey Pesternikov
 Alexey Simak
 Alexis Carvalho
+Alfred Gebert
 Allen Pulsifer
 Amol Pattekar
+Amr Shahin
 Anatoli Tubman
 Anders Gustafsson
 Andi Jahja
@@ -83,6 +85,7 @@ Bernard Leak
 Bertrand Demiddelaer
 Bill Egert
 Bill Hoffman
+Bjoern Sikora
 Bjorn Augustsson
 Bjorn Reese
 Bj<EFBFBD>rn Stenberg
@@ -90,6 +93,8 @@ Bob Richmond
 Bob Schader
 Bogdan Nicula
 Brad Burdick
+Brad Hards
+Brad King
 Bradford Bruce
 Brendan Jurd
 Brent Beardsley
@@ -158,14 +163,17 @@ Daniel Cater
 Daniel Egger
 Daniel Fandrich
 Daniel Johnson
+Daniel Mentz
 Daniel Steinberg
 Daniel Stenberg
 Daniel at touchtunes
 Darryl House
+Darshan Mody
 Dave Dribin
 Dave Halbakken
 Dave Hamilton
 Dave May
+Dave Reisner
 Dave Vasilevsky
 David Bau
 David Binderman
@@ -199,6 +207,7 @@ Dimitris Sarris
 Dinar
 Dirk Eddelbuettel
 Dirk Manske
+Dmitri Shubin
 Dmitriy Sergeyev
 Dmitry Bartsevich
 Dmitry Kurochkin
@@ -231,6 +240,7 @@ Emiliano Ida
 Enrico Scholz
 Enrik Berkhan
 Eric Cooper
+Eric Hu
 Eric Landes
 Eric Lavigne
 Eric Melville
@@ -307,12 +317,15 @@ Hardeep Singh
 Harshal Pradhan
 Hauke Duden
 Heikki Korpela
+Heinrich Ko
 Hendrik Visage
 Henrik Storner
 Hidemoto Nakada
 Hoi-Ho Chan
+Hongli Lai
 Howard Chu
 Hzhijun
+Ian D Allen
 Ian Ford
 Ian Gulliver
 Ian Lynagh
@@ -382,6 +395,7 @@ Jofell Gallardo
 Johan Anderson
 Johan Nilsson
 Johan van Selst
+John Bradshaw
 John Crow
 John Dennis
 John E. Malmberg
@@ -479,6 +493,7 @@ Luca Altea
 Luca Alteas
 Lucas Adamski
 Lukasz Czekierda
+Luke Amery
 Luke Call
 Luong Dinh Dung
 Maciej Karpiuk
@@ -486,6 +501,7 @@ Maciej W. Rozycki
 Manfred Schwarb
 Marc Boucher
 Marc Kleine-Budde
+Marcel Roelofs
 Marcelo Juchem
 Marcin Konicki
 Marco G. Salvagno
@@ -507,6 +523,7 @@ Martin C. Martin
 Martin Drasar
 Martin Hager
 Martin Hedenfalk
+Martin Lemke
 Martin Skinner
 Martin Storsjo
 Marty Kuhrt
@@ -522,6 +539,7 @@ Matt Witherspoon
 Matt Wixson
 Matthew Blain
 Matthew Clarke
+Matthias Bolte
 Maurice Barnum
 Mauro Iorio
 Max Katsev
@@ -566,6 +584,7 @@ Naveen Noel
 Neil Dunbar
 Neil Spring
 Nic Roets
+Nicholas Maniscalco
 Nick Gimbrone
 Nick Humfrey
 Nick Zitzmann
@@ -590,6 +609,7 @@ Olaf St
 Oren Tirosh
 P R Schaffner
 Pascal Terjan
+Pasha Kuznetsov
 Pat Ray
 Patrick Bihan-Faou
 Patrick Monnerat
@@ -607,6 +627,7 @@ Pavel Orehov
 Pavel Raiskup
 Pawel A. Gajda
 Pawel Kierski
+Pedro Larroy
 Pedro Neves
 Pete Su
 Peter Bray
@@ -640,6 +661,7 @@ Pramod Sharma
 Puneet Pawaia
 Quagmire
 Quanah Gibson-Mount
+Quinn Slack
 Rafa Muyo
 Rafael Sagula
 Rainer Canavan
@@ -695,6 +717,7 @@ Rosimildo da Silva
 Roy Shan
 Rune Kleveland
 Ruslan Gazizov
+Rutger Hofman
 Ryan Chan
 Ryan Nelson
 S. Moonesamy
@@ -704,6 +727,7 @@ Sam Listopad
 Sampo Kellomaki
 Samuel D<>az Garc<72>a
 Samuel Listopad
+Samuel Thibault
 Sander Gates
 Sandor Feldi
 Saul good
@@ -735,6 +759,7 @@ Stan van de Burgt
 Stefan Esser
 Stefan Krause
 Stefan Teleman
+Stefan Tomanek
 Stefan Ulrich
 Stephan Bergmann
 Stephen Collyer
@@ -786,6 +811,7 @@ Tom Zerucha
 Tomas Pospisek
 Tomas Szepe
 Tomasz Lacki
+Tommie Gannert
 Tommy Tam
 Ton Voon
 Toon Verwaest
@@ -812,6 +838,7 @@ Vlad Ureche
 Vladimir Lazarenko
 Vojtech Janota
 Vojtech Minarik
+Vsevolod Novikov
 Walter J. Mack
 Wayne Haigh
 Werner Koch

docs/TODO

@@ -16,6 +16,7 @@
  1.2 More data sharing
  1.3 struct lifreq
  1.4 signal-based resolver timeouts
+ 1.5 get rid of PATH_MAX
 
  2. libcurl - multi interface
  2.1 More non-blocking
@@ -134,6 +135,15 @@
  Also, alarm() provides timeout resolution only to the nearest second. alarm
  ought to be replaced by setitimer on systems that support it.
 
+1.5 get rid of PATH_MAX
+
+ Having code use and rely on PATH_MAX is not nice:
+ http://insanecoding.blogspot.com/2007/11/pathmax-simply-isnt.html
+
+ Currently the SSH based code uses it a bit, but to remove PATH_MAX from there
+ we need libssh2 to properly tell us when we pass in a too small buffer and
+ its current API (as of libssh2 1.2.7) doesn't.
+
 2. libcurl - multi interface
 
 2.1 More non-blocking

docs/TheArtOfHttpScripting

@@ -1,5 +1,5 @@
 Online:  http://curl.haxx.se/docs/httpscripting.html
-Date:    May 28, 2008
+Date:    Jan 19, 2011
 
                 The Art Of Scripting HTTP Requests Using Curl
                 =============================================
@@ -38,11 +38,27 @@ Date:    May 28, 2008
  request a particular action, and then the server replies a few text lines
  before the actual requested content is sent to the client.
 
- Using curl's option --verbose (-v as a short option) will display what kind of
- commands curl sends to the server, as well as a few other informational texts. 
+ The client, curl, sends a HTTP request. The request contains a method (like
+ GET, POST, HEAD etc), a number of request headers and sometimes a request
+ body. The HTTP server responds with a status line (indicating if things went
+ well), response headers and most often also a response body. The "body" part
+ is the plain data you requested, like the actual HTML or the image etc.
+
+ 1.1 See the Protocol
+
+  Using curl's option --verbose (-v as a short option) will display what kind
+  of commands curl sends to the server, as well as a few other informational
+  texts.
+
   --verbose is the single most useful option when it comes to debug or even
   understand the curl<->server interaction.
 
+  Sometimes even --verbose is not enough. Then --trace and --trace-ascii offer
+  even more details as they show EVERYTHING curl sends and receives. Use it
+  like this:
+
+      curl --trace-ascii debugdump.txt http://www.example.com/
+
 2. URL
 
  The Uniform Resource Locator format is how you specify the address of a
@@ -61,10 +77,10 @@ Date:    May 28, 2008
  you get a web page returned in your terminal window. The entire HTML document
  that that URL holds.
 
- All HTTP replies contain a set of headers that are normally hidden, use
- curl's --include (-i) option to display them as well as the rest of the
- document. You can also ask the remote server for ONLY the headers by using the
- --head (-I) option (which will make curl issue a HEAD request).
+ All HTTP replies contain a set of response headers that are normally hidden,
+ use curl's --include (-i) option to display them as well as the rest of the
+ document. You can also ask the remote server for ONLY the headers by using
+ the --head (-I) option (which will make curl issue a HEAD request).
 
 4. Forms
 
@@ -127,7 +143,8 @@ Date:    May 28, 2008
   And to use curl to post this form with the same data filled in as before, we
   could do it like:
 
-        curl --data "birthyear=1905&press=%20OK%20" http://www.hotmail.com/when/junk.cgi
+        curl --data "birthyear=1905&press=%20OK%20" \
+        http://www.example.com/when.cgi
 
   This kind of POST will use the Content-Type
   application/x-www-form-urlencoded and is the most widely used POST kind.
@@ -204,7 +221,7 @@ Date:    May 28, 2008
 
  Put a file to a HTTP server with curl:
 
-        curl --upload-file uploadfile http://www.uploadhttp.com/receive.cgi
+        curl --upload-file uploadfile http://www.example.com/receive.cgi
 
 6. HTTP Authentication
 
@@ -217,7 +234,7 @@ Date:    May 28, 2008
 
  To tell curl to use a user and password for authentication:
 
-        curl --user name:password http://www.secrets.com
+        curl --user name:password http://www.example.com
 
  The site might require a different authentication method (check the headers
  returned by the server), and then --ntlm, --digest, --negotiate or even
@@ -257,7 +274,7 @@ Date:    May 28, 2008
 
  Use curl to set the referer field with:
 
-        curl --referer http://curl.haxx.se http://daniel.haxx.se
+        curl --referer http://www.example.come http://www.example.com
 
 8. User Agent
 
@@ -273,11 +290,11 @@ Date:    May 28, 2008
  is time to set the User Agent field to fool the server into thinking you're
  one of those browsers.
 
- To make curl look like Internet Explorer on a Windows 2000 box:
+ To make curl look like Internet Explorer 5 on a Windows 2000 box:
 
   curl --user-agent "Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)" [URL]
 
- Or why not look like you're using Netscape 4.73 on a Linux (PIII) box:
+ Or why not look like you're using Netscape 4.73 on an old Linux box:
 
   curl --user-agent "Mozilla/4.73 [en] (X11; U; Linux 2.2.15 i686)" [URL]
 
@@ -294,7 +311,7 @@ Date:    May 28, 2008
 
  To tell curl to follow a Location:
 
-        curl --location http://www.sitethatredirects.com
+        curl --location http://www.example.com
 
  If you use curl to POST to a site that immediately redirects you to another
  page, you can safely use --location (-L) and --data/--form together. Curl will
@@ -321,13 +338,13 @@ Date:    May 28, 2008
  The simplest way to send a few cookies to the server when getting a page with
  curl is to add them on the command line like:
 
-        curl --cookie "name=Daniel" http://www.cookiesite.com
+        curl --cookie "name=Daniel" http://www.example.com
 
  Cookies are sent as common HTTP headers. This is practical as it allows curl
  to record cookies simply by recording headers. Record cookies with curl by
  using the --dump-header (-D) option like:
 
-        curl --dump-header headers_and_cookies http://www.cookiesite.com
+        curl --dump-header headers_and_cookies http://www.example.com
 
  (Take note that the --cookie-jar option described below is a better way to
  store cookies.)
@@ -338,24 +355,25 @@ Date:    May 28, 2008
  believing you had a previous connection). To use previously stored cookies,
  you run curl like:
 
-        curl --cookie stored_cookies_in_file http://www.cookiesite.com
+        curl --cookie stored_cookies_in_file http://www.example.com
 
  Curl's "cookie engine" gets enabled when you use the --cookie option. If you
  only want curl to understand received cookies, use --cookie with a file that
- doesn't exist. Example, if you want to let curl understand cookies from a page 
- and follow a location (and thus possibly send back cookies it received), you
- can invoke it like:
+ doesn't exist. Example, if you want to let curl understand cookies from a
+ page and follow a location (and thus possibly send back cookies it received),
+ you can invoke it like:
 
-        curl --cookie nada --location http://www.cookiesite.com
+        curl --cookie nada --location http://www.example.com
 
  Curl has the ability to read and write cookie files that use the same file
  format that Netscape and Mozilla do. It is a convenient way to share cookies
- between browsers and automatic scripts. The --cookie (-b) switch automatically
- detects if a given file is such a cookie file and parses it, and by using the
- --cookie-jar (-c) option you'll make curl write a new cookie file at the end of
- an operation:
+ between browsers and automatic scripts. The --cookie (-b) switch
+ automatically detects if a given file is such a cookie file and parses it,
+ and by using the --cookie-jar (-c) option you'll make curl write a new cookie
+ file at the end of an operation:
 
-        curl --cookie cookies.txt --cookie-jar newcookies.txt http://www.cookiesite.com
+        curl --cookie cookies.txt --cookie-jar newcookies.txt \
+        http://www.example.com
 
 11. HTTPS
 
@@ -371,7 +389,7 @@ Date:    May 28, 2008
  Curl supports encrypted fetches thanks to the freely available OpenSSL
  libraries. To get a page from a HTTPS server, simply run curl like:
 
-        curl https://that.secure.server.com
+        curl https://secure.example.com
 
  11.1 Certificates
 
@@ -382,7 +400,7 @@ Date:    May 28, 2008
   can be specified on the command line or if not, entered interactively when
   curl queries for it. Use a certificate with curl on a HTTPS server like:
 
-        curl --cert mycert.pem https://that.secure.server.com
+        curl --cert mycert.pem https://secure.example.com
 
   curl also tries to verify that the server is who it claims to be, by
   verifying the server's certificate against a locally stored CA cert
@@ -403,17 +421,18 @@ Date:    May 28, 2008
  For example, you can change the POST request to a PROPFIND and send the data
  as "Content-Type: text/xml" (instead of the default Content-Type) like this:
 
-        curl --data "<xml>" --header "Content-Type: text/xml" --request PROPFIND url.com
+         curl --data "<xml>" --header "Content-Type: text/xml" \
+              --request PROPFIND url.com
 
  You can delete a default header by providing one without content. Like you
  can ruin the request by chopping off the Host: header:
 
-        curl --header "Host:" http://mysite.com
+        curl --header "Host:" http://www.example.com
 
  You can add headers the same way. Your server may want a "Destination:"
  header, and you can add it:
 
-        curl --header "Destination: http://moo.com/nowhere" http://url.com
+        curl --header "Destination: http://nowhere" http://example.com
 
 13. Web Login
 
@@ -444,7 +463,6 @@ Date:    May 28, 2008
  to do a proper login POST. Remember that the contents need to be URL encoded
  when sent in a normal POST.
 
-
 14. Debug
 
  Many times when you run curl on a site, you'll notice that the site doesn't
@@ -480,12 +498,10 @@ Date:    May 28, 2008
  RFC 2616 is a must to read if you want in-depth understanding of the HTTP
  protocol.
 
- RFC 2396 explains the URL syntax.
+ RFC 3986 explains the URL syntax.
 
  RFC 2109 defines how cookies are supposed to work.
 
  RFC 1867 defines the HTTP post upload format.
 
- http://www.openssl.org is the home of the OpenSSL project
-
  http://curl.haxx.se is the home of the cURL project

docs/curl.1

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -20,7 +20,7 @@
 .\" *
 .\" **************************************************************************
 .\"
-.TH curl 1 "28 November 2009" "Curl 7.20.0" "Curl Manual"
+.TH curl 1 "28 November 2009" "Curl 7.21.4" "Curl Manual"
 .SH NAME
 curl \- transfer a URL
 .SH SYNOPSIS
@@ -351,18 +351,19 @@ run curl.
 is used to seed the random engine for SSL connections. See also the
 \fI--random-file\fP option.
 .IP "-E/--cert <certificate[:password]>"
-(SSL) Tells curl to use the specified certificate file when getting a file
-with HTTPS or FTPS. The certificate must be in PEM format.  If the optional
-password isn't specified, it will be queried for on the terminal. Note that
-this option assumes a \&"certificate" file that is the private key and the
-private certificate concatenated! See \fI--cert\fP and \fI--key\fP to specify
-them independently.
+(SSL) Tells curl to use the specified client certificate file when getting a
+file with HTTPS, FTPS or another SSL-based protocol. The certificate must be
+in PEM format.  If the optional password isn't specified, it will be queried
+for on the terminal. Note that this option assumes a \&"certificate" file that
+is the private key and the private certificate concatenated! See \fI--cert\fP
+and \fI--key\fP to specify them independently.
 
-If curl is built against the NSS SSL library then this option tells
+If curl is built against the NSS SSL library then this option can tell
 curl the nickname of the certificate to use within the NSS database defined
 by the environment variable SSL_DIR (or by default /etc/pki/nssdb). If the
 NSS PEM PKCS#11 module (libnsspem.so) is available then PEM files may be
-loaded.
+loaded. If you want to use a file from the current directory, please precede
+it with "./" prefix, in order to avoid confusion with a nickname.
 
 If this option is used several times, the last one will be used.
 .IP "--cert-type <type>"
@@ -393,11 +394,11 @@ may be loaded.
 If this option is used several times, the last one will be used.
 .IP "--capath <CA certificate directory>"
 (SSL) Tells curl to use the specified certificate directory to verify the
-peer. The certificates must be in PEM format, and the directory must have been
-processed using the c_rehash utility supplied with openssl. Using
-\fI--capath\fP can allow curl to make SSL-connections much more efficiently
-than using \fI--cacert\fP if the \fI--cacert\fP file contains many CA
-certificates.
+peer. The certificates must be in PEM format, and if curl is built against
+OpenSSL, the directory must have been processed using the c_rehash utility
+supplied with OpenSSL. Using \fI--capath\fP can allow OpenSSL-powered curl to
+make SSL-connections much more efficiently than using \fI--cacert\fP if the
+\fI--cacert\fP file contains many CA certificates.
 
 If this option is used several times, the last one will be used.
 .IP "-f/--fail"
@@ -427,7 +428,7 @@ server. The method argument should be one of the following alternatives:
 .RS
 .IP multicwd
 curl does a single CWD operation for each path part in the given URL. For deep
-hierarchies this means very many commands. This is how RFC1738 says it should
+hierarchies this means very many commands. This is how RFC 1738 says it should
 be done. This is the default but the slowest behavior.
 .IP nocwd
 curl does no CWD at all. curl will do SIZE, RETR, STOR etc and give a full
@@ -439,7 +440,7 @@ compliant than 'nocwd' but without the full penalty of 'multicwd'.
 .RE
 (Added in 7.15.1)
 .IP "--ftp-pasv"
-(FTP) Use passive mode for the data conection. Passive is the internal default
+(FTP) Use passive mode for the data connection. Passive is the internal default
 behavior, but using this option can be used to override a previous
 \fI-P/-ftp-port\fP option. (Added in 7.11.0)
 
@@ -501,7 +502,7 @@ waits for a reply from the server.
 .IP "-F/--form <name=content>"
 (HTTP) This lets curl emulate a filled-in form in which a user has pressed the
 submit button. This causes curl to POST data using the Content-Type
-multipart/form-data according to RFC2388. This enables uploading of binary
+multipart/form-data according to RFC 2388. This enables uploading of binary
 files etc. To force the 'content' part to be a file, prefix the file name
 with an @ sign. To just get the content part from a file, prefix the file name
 with the symbol <. The difference between @ and < is then that @ makes a file
@@ -514,8 +515,8 @@ input:
 
 \fBcurl\fP -F password=@/etc/passwd www.mypasswords.com
 
-To read the file's content from stdin instead of a file, use - where the file
-name should've been. This goes for both @ and < constructs.
+To read content from stdin instead of a file, use - as the filename. This goes
+for both @ and < constructs.
 
 You can also tell curl what Content-Type to use by using 'type=', in a manner
 similar to:
@@ -814,6 +815,17 @@ to FTP to the machine host.domain.com with user name \&'myself' and password
 .IP "--netrc-optional"
 Very similar to \fI--netrc\fP, but this option makes the .netrc usage
 \fBoptional\fP and not mandatory as the \fI--netrc\fP option does.
+
+.IP "--netrc-file"
+This option is similar to \fI--netrc\fP, except that you provide the path
+(absolute or relative) to the netrc file that Curl should use.
+You can only specify one netrc file per invocation. If several
+\fI--netrc-file\fP options are provided, only the \fBlast one\fP will be used.
+(Added in 7.21.5)
+
+This option overrides any use of \fI--netrc\fP as they are mutually exclusive.
+It will also abide by --netrc-optional if specified.
+
 .IP "--negotiate"
 (HTTP) Enables GSS-Negotiate authentication. The GSS-Negotiate method was
 designed by Microsoft and is used in their web applications. It is primarily
@@ -904,6 +916,10 @@ part of the remote file is used, the path is cut off.)
 The remote file name to use for saving is extracted from the given URL,
 nothing else.
 
+Consequentially, the file will be saved in the current working directory. If
+you want the file saved in a different directory, make sure you change current
+working directory before you invoke curl with the \fB-O/--remote-name\fP flag!
+
 You may use this option as many times as the number of URLs you have.
 .IP "--remote-name-all"
 This option changes the default action for all given URLs to be dealt with as
@@ -1051,11 +1067,12 @@ just before the transfer command(s), prefix the command with a '+' (this
 is only supported for FTP). You may specify any number of commands. If
 the server returns failure for one of the commands, the entire operation
 will be aborted. You must send syntactically correct FTP commands as
-RFC959 defines to FTP servers, or one of the commands listed below to
+RFC 959 defines to FTP servers, or one of the commands listed below to
 SFTP servers.  This option can be used multiple times.
 
 SFTP is a binary protocol. Unlike for FTP, libcurl interprets SFTP quote
-commands before sending them to the server.  Following is the list of
+commands itself before sending them to the server.  File names may be quoted
+shell-style to embed spaces or special characters.  Following is the list of
 all supported SFTP quote commands:
 .RS
 .IP "chgrp group file"
@@ -1234,14 +1251,12 @@ This option (as well as \fI--socks4\fP) does not work with IPV6, FTPS or LDAP.
 The default service name for a socks server is rcmd/server-fqdn. This option
 allows you to change it.
 
-Examples:
- --socks5 proxy-name \fI--socks5-gssapi-service\fP sockd   would use
-sockd/proxy-name
- --socks5 proxy-name \fI--socks5-gssapi-service\fP sockd/real-name   would use
-sockd/real-name for cases where the proxy-name does not match the princpal name.
- (Added in 7.19.4).
+Examples: --socks5 proxy-name \fI--socks5-gssapi-service\fP sockd would use
+sockd/proxy-name --socks5 proxy-name \fI--socks5-gssapi-service\fP
+sockd/real-name would use sockd/real-name for cases where the proxy-name does
+not match the principal name.  (Added in 7.19.4).
 .IP "--socks5-gssapi-nec"
-As part of the gssapi negotiation a protection mode is negotiated. The rfc1961
+As part of the gssapi negotiation a protection mode is negotiated. RFC 1961
 says in section 4.3/4.4 it should be protected, but the NEC reference
 implementation does not.  The option \fI--socks5-gssapi-nec\fP allows the
 unprotected exchange of the protection mode negotiation. (Added in 7.19.4).
@@ -1264,12 +1279,25 @@ XDISPLOC=<X display> Sets the X display location.
 NEW_ENV=<var,val> Sets an environment variable.
 .IP "--tftp-blksize <value>"
 (TFTP) Set TFTP BLKSIZE option (must be >512). This is the block size that
-curl will try to use when tranferring data to or from a TFTP server. By
+curl will try to use when transferring data to or from a TFTP server. By
 default 512 bytes will be used.
 
 If this option is used several times, the last one will be used.
 
 (Added in 7.20.0)
+.IP "--tlsauthtype <authtype>"
+Set TLS authentication type. Currently, the only supported option is "SRP",
+for TLS-SRP (RFC 5054). If \fI--tlsuser\fP and \fI--tlspassword\fP are
+specified but \fI--tlsauthtype\fP is not, then this option defaults to "SRP".
+(Added in 7.21.4)
+.IP "--tlsuser <user>"
+Set username for use with the TLS authentication method specified with
+\fI--tlsauthtype\fP. Requires that \fI--tlspassword\fP also be set.  (Added in
+7.21.4)
+.IP "--tlspassword <password>"
+Set password for use with the TLS authentication method specified with
+\fI--tlsauthtype\fP. Requires that \fI--tlsuser\fP also be set.  (Added in
+7.21.4)
 .IP "-T/--upload-file <file>"
 This transfers the specified local file to the remote URL. If there is no file
 part in the specified URL, Curl will append the local file name. NOTE that you
@@ -1357,7 +1385,7 @@ If you think this option still doesn't give you enough details, consider using
 
 This option overrides previous uses of \fI--trace-ascii\fP or \fI--trace\fP.
 
-Use \fI-S/--silent\fP to make curl quiet.
+Use \fI-s/--silent\fP to make curl quiet.
 .IP "-V/--version"
 Displays information about curl and the libcurl version it uses.
 
@@ -1396,6 +1424,8 @@ This curl supports IDN - international domain names.
 .IP "SSPI"
 SSPI is supported. If you use NTLM and set a blank user name, curl will
 authenticate with your current user and password.
+.IP "TLS-SRP"
+SRP (Secure Remote Password) authentication is supported for TLS.
 .RE
 .IP "-w/--write-out <format>"
 Defines what to display on stdout after a completed and successful
@@ -1552,9 +1582,9 @@ not set.
 
 If this option is used several times, the last one will be used.
 .IP "-z/--time-cond <date expression>"
-(HTTP/FTP) Request a file that has been modified later than the given time and
-date, or one that has been modified before that time. The date expression can
-be all sorts of date strings or if it doesn't match any internal ones, it
+(HTTP/FTP/FILE) Request a file that has been modified later than the given time
+and date, or one that has been modified before that time. The date expression
+can be all sorts of date strings or if it doesn't match any internal ones, it
 tries to get the time from a given file name instead! See the
 \fIcurl_getdate(3)\fP man pages for date expression details.
 
@@ -1622,6 +1652,10 @@ Unsupported protocol. This build of curl has no support for this protocol.
 Failed to initialize.
 .IP 3
 URL malformed. The syntax was not correct.
+.IP 4
+A feature or option that was needed to perform the desired request was not
+enabled or was explicitly disabled at build-time. To make curl able to do
+this, you probably need another build of libcurl!
 .IP 5
 Couldn't resolve proxy. The given proxy host could not be resolved.
 .IP 6
@@ -1698,11 +1732,13 @@ Interface error. A specified outgoing interface could not be used.
 .IP 47
 Too many redirects. When following redirects, curl hit the maximum amount.
 .IP 48
-Unknown TELNET option specified.
+Unknown option specified to libcurl. This indicates that you passed a weird
+option to curl that was passed on to libcurl and rejected. Read up in the
+manual!
 .IP 49
 Malformed telnet option.
 .IP 51
-The peer's SSL certificate or SSH MD5 fingerprint was not ok.
+The peer's SSL certificate or SSH MD5 fingerprint was not OK.
 .IP 52
 The server didn't reply anything, which here is considered an error.
 .IP 53

docs/examples/.gitignore

@@ -29,4 +29,7 @@ sendrecv
 sepheaders
 simple
 simplepost
+simplesmtp
 simplessl
+smtp-multi
+smtp-tls

docs/examples/10-at-a-time.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Example application source code using the multi interface to download many
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Example application source code using the multi interface to download many
  * files, but with a capped maximum amount of simultaneous transfers.
  *
  * Written by Michael Wallner

docs/examples/Makefile.am

@@ -1,5 +1,24 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
 #
+# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
 
 AUTOMAKE_OPTIONS = foreign nostdinc
 
@@ -34,4 +53,4 @@ LDADD = $(LIBDIR)/libcurl.la
 # Makefile.inc provides the check_PROGRAMS and COMPLICATED_EXAMPLES defines
 include Makefile.inc
 
-
+all: $(check_PROGRAMS)

docs/examples/Makefile.example

@@ -1,11 +1,24 @@
-#############################################################################
+#***************************************************************************
 #                                  _   _ ____  _
 #  Project                     ___| | | |  _ \| |
 #                             / __| | | | |_) | |
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
+# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
 
 # What to call the final executable
 TARGET = example

docs/examples/Makefile.inc

@@ -4,7 +4,7 @@ check_PROGRAMS = 10-at-a-time anyauthput cookie_interface debug fileupload \
   https multi-app multi-debugcallback multi-double multi-post multi-single \
   persistant post-callback postit2 sepheaders simple simplepost simplessl  \
   sendrecv httpcustomheader certinfo chkspeed ftpgetinfo ftp-wildcard \
-  smtp-multi
+  smtp-multi simplesmtp smtp-tls
 
 # These examples require external dependencies that may not be commonly
 # available on POSIX systems, so don't bother attempting to compile them here.

docs/examples/Makefile.m32

@@ -1,3 +1,24 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
 #########################################################################
 #
 ## Makefile for building curl examples with MingW32

docs/examples/anyauthput.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <fcntl.h>
 #ifdef WIN32

docs/examples/cacertinmem.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Example using a "in core" PEM certificate to retrieve a https page.
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Example using a "in core" PEM certificate to retrieve a https page.
  * Written by Theo Borm
  */
 

docs/examples/certinfo.c

@@ -1,6 +1,24 @@
-/*****************************************************************************
- */
-
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 
 #include <curl/curl.h>
@@ -9,9 +27,12 @@
 
 static size_t wrfu(void *ptr,  size_t  size,  size_t  nmemb,  void *stream)
 {
+  (void)stream;
+  (void)ptr;
   return size * nmemb;
 }
-int main(int argc, char **argv)
+
+int main(void)
 {
   CURL *curl;
   CURLcode res;

docs/examples/chkspeed.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Example source code to show how the callback function can be used to
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Example source code to show how the callback function can be used to
  * download data into a chunk of memory instead of storing it in a file.
  * After successful download we use curl_easy_getinfo() calls to get the
  * amount of downloaded bytes, the time used for the whole download, and
@@ -71,7 +84,7 @@ int main(int argc, char *argv[])
         } else if (strncasecmp(*argv, "-T", 2) == 0) {
           prttime = 1;
         } else if (strncasecmp(*argv, "-M=", 3) == 0) {
-          long m = strtol(argv+3, NULL, 10);
+          long m = strtol((*argv)+3, NULL, 10);
           switch(m) {
             case   1: url = URL_1M;
                       break;

docs/examples/cookie_interface.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- *  This example shows usage of simple cookie interface.
- */
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* This example shows usage of simple cookie interface. */
 
 #include <stdio.h>
 #include <string.h>

docs/examples/debug.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <curl/curl.h>
 
@@ -28,12 +40,12 @@ void dump(const char *text,
     /* without the hex output, we can fit more on screen */
     width = 0x40;
 
-  fprintf(stream, "%s, %010.10ld bytes (0x%08.8lx)\n",
+  fprintf(stream, "%s, %10.10ld bytes (0x%8.8lx)\n",
           text, (long)size, (long)size);
 
   for(i=0; i<size; i+= width) {
 
-    fprintf(stream, "%04.4lx: ", (long)i);
+    fprintf(stream, "%4.4lx: ", (long)i);
 
     if(!nohex) {
       /* hex not disabled, show it */

docs/examples/evhiperfifo.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Example application source code using the multi socket interface to
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Example application source code using the multi socket interface to
  * download many files at once.
  *
  * This example features the same basic functionality as hiperfifo.c does,
@@ -367,7 +380,7 @@ static int init_fifo (GlobalInfo *g)
 {
   struct stat st;
   static const char *fifo = "hiper.fifo";
-  int sockfd;
+  curl_socket_t sockfd;
 
   fprintf(MSG_OUT, "Creating named pipe \"%s\"\n", fifo);
   if ( lstat (fifo, &st) == 0 )

docs/examples/fileupload.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <curl/curl.h>
 #include <sys/stat.h>

docs/examples/fopen.c

@@ -68,8 +68,8 @@ struct fcurl_data
   } handle;                   /* handle */
 
   char *buffer;               /* buffer to store cached data*/
-  int buffer_len;             /* currently allocated buffers length */
-  int buffer_pos;             /* end of data in buffer*/
+  size_t buffer_len;          /* currently allocated buffers length */
+  size_t buffer_pos;          /* end of data in buffer*/
   int still_running;          /* Is background url fetch still in progress */
 };
 
@@ -80,7 +80,7 @@ URL_FILE *url_fopen(const char *url,const char *operation);
 int url_fclose(URL_FILE *file);
 int url_feof(URL_FILE *file);
 size_t url_fread(void *ptr, size_t size, size_t nmemb, URL_FILE *file);
-char * url_fgets(char *ptr, int size, URL_FILE *file);
+char * url_fgets(char *ptr, size_t size, URL_FILE *file);
 void url_rewind(URL_FILE *file);
 
 /* we use a global one for convenience */
@@ -93,7 +93,7 @@ static size_t write_callback(char *buffer,
                              void *userp)
 {
   char *newbuff;
-  int rembuff;
+  size_t rembuff;
 
   URL_FILE *url = (URL_FILE *)userp;
   size *= nitems;
@@ -121,7 +121,7 @@ static size_t write_callback(char *buffer,
 }
 
 /* use to attempt to fill the read buffer up to requested number of bytes */
-static int fill_buffer(URL_FILE *file,int want,int waittime)
+static int fill_buffer(URL_FILE *file, size_t want)
 {
   fd_set fdread;
   fd_set fdwrite;
@@ -323,7 +323,7 @@ size_t url_fread(void *ptr, size_t size, size_t nmemb, URL_FILE *file)
   case CFTYPE_CURL:
     want = nmemb * size;
 
-    fill_buffer(file,want,1);
+    fill_buffer(file,want);
 
     /* check if theres data in the buffer - if not fill_buffer()
      * either errored or EOF */
@@ -351,10 +351,10 @@ size_t url_fread(void *ptr, size_t size, size_t nmemb, URL_FILE *file)
   return want;
 }
 
-char *url_fgets(char *ptr, int size, URL_FILE *file)
+char *url_fgets(char *ptr, size_t size, URL_FILE *file)
 {
-  int want = size - 1;/* always need to leave room for zero termination */
-  int loop;
+  size_t want = size - 1;/* always need to leave room for zero termination */
+  size_t loop;
 
   switch(file->type) {
   case CFTYPE_FILE:
@@ -362,7 +362,7 @@ char *url_fgets(char *ptr, int size, URL_FILE *file)
     break;
 
   case CFTYPE_CURL:
-    fill_buffer(file,want,1);
+    fill_buffer(file,want);
 
     /* check if theres data in the buffer - if not fill either errored or
      * EOF */

docs/examples/ftp-wildcard.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <curl/curl.h>
 #include <stdio.h>
 

docs/examples/ftpget.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 
 #include <curl/curl.h>

docs/examples/ftpgetinfo.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <string.h>
 
@@ -21,6 +33,8 @@
 
 static size_t throw_away(void *ptr, size_t size, size_t nmemb, void *data)
 {
+  (void)ptr;
+  (void)data;
   /* we are not interested in the headers itself,
      so we only return the size we would have saved ... */
   return (size_t)(size * nmemb);
@@ -58,7 +72,7 @@ int main(void)
       if((CURLE_OK == res) && filetime)
         printf("filetime %s: %s", filename, ctime(&filetime));
       res = curl_easy_getinfo(curl, CURLINFO_CONTENT_LENGTH_DOWNLOAD, &filesize);
-      if((CURLE_OK == res) && filesize)
+      if((CURLE_OK == res) && (filesize>0))
         printf("filesize %s: %0.0f bytes\n", filename, filesize);
     } else {
       /* we failed */

docs/examples/ftpgetresp.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 
 #include <curl/curl.h>
@@ -27,7 +39,7 @@ write_response(void *ptr, size_t size, size_t nmemb, void *data)
   return fwrite(ptr, size, nmemb, writehere);
 }
 
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *curl;
   CURLcode res;

docs/examples/ftpupload.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <string.h>
 
@@ -48,7 +60,7 @@ static size_t read_callback(void *ptr, size_t size, size_t nmemb, void *stream)
   return retcode;
 }
 
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *curl;
   CURLcode res;

docs/examples/ftpuploadresume.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Upload to FTP, resuming failed transfers
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Upload to FTP, resuming failed transfers
  *
  * Compile for MinGW like this:
  *  gcc -Wall -pedantic -std=c99 ftpuploadwithresume.c -o ftpuploadresume.exe

docs/examples/getinfo.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <curl/curl.h>
 

docs/examples/getinmemory.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Example source code to show how the callback function can be used to
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Example source code to show how the callback function can be used to
  * download data into a chunk of memory instead of storing it in a file.
  */
 
@@ -43,7 +56,7 @@ WriteMemoryCallback(void *ptr, size_t size, size_t nmemb, void *data)
 }
 
 
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *curl_handle;
 
@@ -87,7 +100,7 @@ int main(int argc, char **argv)
    * you're done with it, you should free() it as a nice application.
    */
 
-  printf("%lu bytes retrieved\n", chunk.size);
+  printf("%lu bytes retrieved\n", (long)chunk.size);
 
   if(chunk.memory)
     free(chunk.memory);

docs/examples/ghiper.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Example application source code using the multi socket interface to
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Example application source code using the multi socket interface to
  * download many files at once.
  *
  * Written by Jeff Pohlmeyer

docs/examples/hiperfifo.c

@@ -1,15 +1,28 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Example application source code using the multi socket interface to
- * download many files at once.
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
  *
- * Written by Jeff Pohlmeyer
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Example application source code using the multi socket interface to
+   download many files at once.
+
+Written by Jeff Pohlmeyer
 
 Requires libevent and a (POSIX?) system that has mkfifo().
 
@@ -350,7 +363,7 @@ static int init_fifo (GlobalInfo *g)
 {
   struct stat st;
   static const char *fifo = "hiper.fifo";
-  int sockfd;
+  curl_socket_t sockfd;
 
   fprintf(MSG_OUT, "Creating named pipe \"%s\"\n", fifo);
   if (lstat (fifo, &st) == 0) {

docs/examples/htmltidy.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Download a document and use libtidy to parse the HTML.
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Download a document and use libtidy to parse the HTML.
  * Written by Jeff Pohlmeyer
  *
  * LibTidy => http://tidy.sourceforge.net

docs/examples/htmltitle.cc

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 // Get a web page, parse it with libxml.
 //
 // Written by Lars Nilsson

docs/examples/http-post.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <curl/curl.h>
 

docs/examples/httpcustomheader.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <curl/curl.h>
 

docs/examples/httpput.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <fcntl.h>
 #include <sys/stat.h>

docs/examples/https.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <curl/curl.h>
 

docs/examples/makefile.dj

@@ -1,6 +1,27 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
 #
 #  Adapted for djgpp / Watt-32 / DOS by
-#  Gisle Vanem <giva@bgnett.no>
+#  Gisle Vanem <gvanem@broadpark.no>
 #
 
 TOPDIR = ../..

docs/examples/multi-app.c

@@ -1,13 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * This is an example application source code using the multi interface.
- */
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* This is an example application source code using the multi interface. */
 
 #include <stdio.h>
 #include <string.h>
@@ -27,7 +39,7 @@
 #define HTTP_HANDLE 0   /* Index for the HTTP transfer */
 #define FTP_HANDLE 1    /* Index for the FTP transfer */
 
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *handles[HANDLECOUNT];
   CURLM *multi_handle;

docs/examples/multi-debugcallback.c

@@ -1,14 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * This is a very simple example using the multi interface and the debug
- * callback.
- */
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* This is an example showing the multi interface and the debug callback. */
 
 #include <stdio.h>
 #include <string.h>
@@ -37,12 +48,12 @@ void dump(const char *text,
     /* without the hex output, we can fit more on screen */
     width = 0x40;
 
-  fprintf(stream, "%s, %010.10ld bytes (0x%08.8lx)\n",
+  fprintf(stream, "%s, %10.10ld bytes (0x%8.8lx)\n",
           text, (long)size, (long)size);
 
   for(i=0; i<size; i+= width) {
 
-    fprintf(stream, "%04.4lx: ", (long)i);
+    fprintf(stream, "%4.4lx: ", (long)i);
 
     if(!nohex) {
       /* hex not disabled, show it */
@@ -79,6 +90,7 @@ int my_trace(CURL *handle, curl_infotype type,
 {
   const char *text;
 
+  (void)userp;
   (void)handle; /* prevent compiler warning */
 
   switch (type) {
@@ -108,7 +120,7 @@ int my_trace(CURL *handle, curl_infotype type,
 /*
  * Simply download a HTTP file.
  */
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *http_handle;
   CURLM *multi_handle;

docs/examples/multi-double.c

@@ -1,14 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * This is a very simple example using the multi interface.
- */
-
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <string.h>
 
@@ -22,7 +32,7 @@
 /*
  * Simply download two HTTP files!
  */
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *http_handle;
   CURL *http_handle2;

docs/examples/multi-post.c

@@ -1,21 +1,33 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * This is an example application source code using the multi interface
- * to do a multipart formpost without "blocking".
- */
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* This is an example application source code using the multi interface
+ * to do a multipart formpost without "blocking". */
 #include <stdio.h>
 #include <string.h>
 #include <sys/time.h>
 
 #include <curl/curl.h>
 
-int main(int argc, char *argv[])
+int main(void)
 {
   CURL *curl;
 

docs/examples/multi-single.c

@@ -1,13 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * This is a very simple example using the multi interface.
- */
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* This is a very simple example using the multi interface. */
 
 #include <stdio.h>
 #include <string.h>
@@ -22,7 +34,7 @@
 /*
  * Simply download a HTTP file.
  */
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *http_handle;
   CURLM *multi_handle;

docs/examples/multithread.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 /* A multi-threaded example that uses pthreads extensively to fetch
  * X remote files at once */
 

docs/examples/opensslthreadlock.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Example source code to show one way to set the necessary OpenSSL locking
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Example source code to show one way to set the necessary OpenSSL locking
  * callbacks if you want to do multi-threaded transfers with HTTPS/FTPS with
  * libcurl built to use OpenSSL.
  *

docs/examples/persistant.c

@@ -1,17 +1,29 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <unistd.h>
 #include <curl/curl.h>
 
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *curl;
   CURLcode res;

docs/examples/post-callback.c

@@ -1,14 +1,26 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * An example source code that issues a HTTP POST and we provide the actual
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* An example source code that issues a HTTP POST and we provide the actual
  * data through a read callback.
- *
  */
 #include <stdio.h>
 #include <string.h>

docs/examples/postit2.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * Example code that uploads a file name 'foo' to a remote script that accepts
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* Example code that uploads a file name 'foo' to a remote script that accepts
  * "HTML form based" (as described in RFC1738) uploads using HTTP POST.
  *
  * The imaginary form we'll fill in looks like:

docs/examples/sampleconv.c

@@ -1,11 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 /*
    This is a simple example showing how a program on a non-ASCII platform
    would invoke callbacks to do its own codeset conversions instead of

docs/examples/sendrecv.c

@@ -1,20 +1,32 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * An example of curl_easy_send() and curl_easy_recv() usage.
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- */
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* An example of curl_easy_send() and curl_easy_recv() usage. */
 
 #include <stdio.h>
 #include <string.h>
 #include <curl/curl.h>
 
 /* Auxiliary function that waits on the socket. */
-static int wait_on_socket(int sockfd, int for_recv, long timeout_ms)
+static int wait_on_socket(curl_socket_t sockfd, int for_recv, long timeout_ms)
 {
   struct timeval tv;
   fd_set infd, outfd, errfd;
@@ -49,7 +61,8 @@ int main(void)
   CURLcode res;
   /* Minimalistic http request */
   const char *request = "GET / HTTP/1.0\r\nHost: example.com\r\n\r\n";
-  int sockfd; /* socket */
+  curl_socket_t sockfd; /* socket */
+  long sockextr;
   size_t iolen;
 
   curl = curl_easy_init();
@@ -65,9 +78,11 @@ int main(void)
       return 1;
     }
 
-    /* Extract the socket from the curl handle - we'll need it
-     * for waiting */
-    res = curl_easy_getinfo(curl, CURLINFO_LASTSOCKET, &sockfd);
+    /* Extract the socket from the curl handle - we'll need it for waiting.
+     * Note that this API takes a pointer to a 'long' while we use
+     * curl_socket_t for sockets otherwise.
+     */
+    res = curl_easy_getinfo(curl, CURLINFO_LASTSOCKET, &sockextr);
 
     if(CURLE_OK != res)
     {
@@ -75,6 +90,8 @@ int main(void)
       return 1;
     }
 
+    sockfd = sockextr;
+
     /* wait for the socket to become ready for sending */
     if(!wait_on_socket(sockfd, 0, 60000L))
     {

docs/examples/sepheaders.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <stdlib.h>
 #include <unistd.h>
@@ -21,7 +33,7 @@ static size_t write_data(void *ptr, size_t size, size_t nmemb, void *stream)
   return written;
 }
 
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *curl_handle;
   static const char *headerfilename = "head.out";

docs/examples/simple.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <curl/curl.h>
 

docs/examples/simplepost.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 #include <string.h>
 #include <curl/curl.h>

docs/examples/simplesmtp.c

@@ -0,0 +1,83 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+#include <stdio.h>
+#include <string.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+  struct curl_slist *recipients = NULL;
+
+  /* value for envelope reverse-path */
+  static const char *from = "<bradh@example.com>";
+
+  /* this becomes the envelope forward-path */
+  static const char *to = "<bradh@example.net>";
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* this is the URL for your mailserver - you can also use an smtps:// URL
+     * here */
+    curl_easy_setopt(curl, CURLOPT_URL, "smtp://mail.example.net.");
+
+    /* Note that this option isn't strictly required, omitting it will result in
+     * libcurl will sent the MAIL FROM command with no sender data. All
+     * autoresponses should have an empty reverse-path, and should be directed
+     * to the address in the reverse-path which triggered them. Otherwise, they
+     * could cause an endless loop. See RFC 5321 Section 4.5.5 for more details.
+     */
+    curl_easy_setopt(curl, CURLOPT_MAIL_FROM, from);
+
+    /* Note that the CURLOPT_MAIL_RCPT takes a list, not a char array.  */
+    recipients = curl_slist_append(recipients, to);
+    curl_easy_setopt(curl, CURLOPT_MAIL_RCPT, recipients);
+
+    /* You provide the payload (headers and the body of the message) as the
+     * "data" element. There are two choices, either:
+     * - provide a callback function and specify the function name using the
+     * CURLOPT_READFUNCTION option; or
+     * - just provide a FILE pointer that can be used to read the data from.
+     * The easiest case is just to read from standard input, (which is available
+     * as a FILE pointer) as shown here.
+     */
+    curl_easy_setopt(curl, CURLOPT_READDATA, stdin);
+
+    /* send the message (including headers) */
+    res = curl_easy_perform(curl);
+
+    /* free the list of recipients */
+    curl_slist_free_all(recipients);
+
+    /* curl won't send the QUIT command until you call cleanup, so you should be
+     * able to re-use this connection for additional messages (setting
+     * CURLOPT_MAIL_FROM and CURLOPT_MAIL_RCPT as required, and calling
+     * curl_easy_perform() again. It may not be a good idea to keep the
+     * connection open for a very long time though (more than a few minutes may
+     * result in the server timing out the connection), and you do want to clean
+     * up in the end.
+     */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/examples/simplessl.c

@@ -1,12 +1,24 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- */
-
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
 #include <stdio.h>
 
 #include <curl/curl.h>
@@ -32,7 +44,7 @@
 
 */
 
-int main(int argc, char **argv)
+int main(void)
 {
   CURL *curl;
   CURLcode res;
@@ -47,7 +59,7 @@ int main(int argc, char **argv)
 
   const char *pEngine;
 
-#if USE_ENGINE
+#ifdef USE_ENGINE
   pKeyName  = "rsa_test";
   pKeyType  = "ENG";
   pEngine   = "chil";            /* for nChiper HSM... */

docs/examples/smooth-gtk-thread.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * This is a multi threaded application that uses a progress bar to show
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* This is a multi threaded application that uses a progress bar to show
  * status.  It uses Gtk+ to make a smooth pulse.
  *
  * Written by Jud Bishop after studying the other examples provided with

docs/examples/smtp-multi.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * This is an example application source code sending SMTP mail using the
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* This is an example application source code sending SMTP mail using the
  * multi interface.
  */
 
@@ -21,7 +34,7 @@
 #define SMTPSERVER "smtp.example.com"
 #define SMTPPORT ":587" /* it is a colon+port string, but you can set it
                            to "" to use the default port */
-#define RECEPIENT "receipient@example.com"
+#define RECIPIENT "<recipient@example.com>"
 #define MAILFROM "<realuser@example.com>"
 
 #define MULTI_PERFORM_HANG_TIMEOUT 60 * 1000
@@ -99,9 +112,9 @@ int main(void)
    if(!mcurl)
      return 2;
 
-   rcpt_list = curl_slist_append(rcpt_list, RECEPIENT);
+   rcpt_list = curl_slist_append(rcpt_list, RECIPIENT);
    /* more addresses can be added here
-      rcpt_list = curl_slist_append(rcpt_list, "others@example.com");
+      rcpt_list = curl_slist_append(rcpt_list, "<others@example.com>");
    */
 
    curl_easy_setopt(curl, CURLOPT_URL, "smtp://" SMTPSERVER SMTPPORT);

docs/examples/smtp-tls.c

@@ -0,0 +1,148 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+#include <stdio.h>
+#include <string.h>
+#include <curl/curl.h>
+
+/* This is a simple example showing how to send mail using libcurl's SMTP
+ * capabilities. It builds on the simplesmtp.c example, adding some
+ * authentication and transport security.
+ */
+
+#define FROM    "<sender@example.org>"
+#define TO      "<addressee@example.net>"
+#define CC      "<info@example.org>"
+
+static const char *payload_text[]={
+  "Date: Mon, 29 Nov 2010 21:54:29 +1100\n",
+  "To: " TO "\n",
+  "From: " FROM "(Example User)\n",
+  "Cc: " CC "(Another example User)\n",
+  "Message-ID: <dcd7cb36-11db-487a-9f3a-e652a9458efd@rfcpedant.example.org>\n",
+  "Subject: SMTP TLS example message\n",
+  "\n", /* empty line to divide headers from body, see RFC5322 */
+  "The body of the message starts here.\n",
+  "\n",
+  "It could be a lot of lines, could be MIME encoded, whatever.\n",
+  "Check RFC5322.\n",
+  NULL
+};
+
+struct upload_status {
+  int lines_read;
+};
+
+static size_t payload_source(void *ptr, size_t size, size_t nmemb, void *userp)
+{
+  struct upload_status *upload_ctx = (struct upload_status *)userp;
+  const char *data;
+
+  if ((size == 0) || (nmemb == 0) || ((size*nmemb) < 1)) {
+    return 0;
+  }
+
+  data = payload_text[upload_ctx->lines_read];
+
+  if (data) {
+    size_t len = strlen(data);
+    memcpy(ptr, data, len);
+    upload_ctx->lines_read ++;
+    return len;
+  }
+  return 0;
+}
+
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+  struct curl_slist *recipients = NULL;
+  struct upload_status upload_ctx;
+
+  upload_ctx.lines_read = 0;
+
+  curl = curl_easy_init();
+  if (curl) {
+    /* This is the URL for your mailserver. Note the use of port 587 here,
+     * instead of the normal SMTP port (25). Port 587 is commonly used for
+     * secure mail submission (see RFC4403), but you should use whatever
+     * matches your server configuration. */
+    curl_easy_setopt(curl, CURLOPT_URL, "smtp://mainserver.example.net:587");
+
+    /* In this example, we'll start with a plain text connection, and upgrade
+     * to Transport Layer Security (TLS) using the STARTTLS command. Be careful
+     * of using CURLUSESSL_TRY here, because if TLS upgrade fails, the transfer
+     * will continue anyway - see the security discussion in the libcurl
+     * tutorial for more details. */
+    curl_easy_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_ALL);
+
+    /* If your server doesn't have a valid certificate, then you can disable
+     * part of the Transport Layer Security protection by setting the
+     * CURLOPT_SSL_VERIFYPEER and CURLOPT_SSL_VERIFYHOST options to 0 (false).
+     *   curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0);
+     *   curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0);
+     * That is, in general, a bad idea. It is still better than sending your
+     * authentication details in plain text though.
+     * Instead, you should get the issuer certificate (or the host certificate
+     * if the certificate is self-signed) and add it to the set of certificates
+     * that are known to libcurl using CURLOPT_CAINFO and/or CURLOPT_CAPATH. See
+     * docs/SSLCERTS for more information.
+     */
+    curl_easy_setopt(curl, CURLOPT_CAINFO, "/path/to/certificate.pem");
+
+    /* A common reason for requiring transport security is to protect
+     * authentication details (user names and passwords) from being "snooped"
+     * on the network. Here is how the user name and password are provided: */
+    curl_easy_setopt(curl, CURLOPT_USERNAME, "user@example.net");
+    curl_easy_setopt(curl, CURLOPT_PASSWORD, "P@ssw0rd");
+
+    /* value for envelope reverse-path */
+    curl_easy_setopt(curl, CURLOPT_MAIL_FROM, FROM);
+    /* Add two recipients, in this particular case they correspond to the
+     * To: and Cc: addressees in the header, but they could be any kind of
+     * recipient. */
+    recipients = curl_slist_append(recipients, TO);
+    recipients = curl_slist_append(recipients, CC);
+    curl_easy_setopt(curl, CURLOPT_MAIL_RCPT, recipients);
+
+    /* In this case, we're using a callback function to specify the data. You
+     * could just use the CURLOPT_READDATA option to specify a FILE pointer to
+     * read from.
+     */
+    curl_easy_setopt(curl, CURLOPT_READFUNCTION, payload_source);
+    curl_easy_setopt(curl, CURLOPT_READDATA, &upload_ctx);
+
+    /* Since the traffic will be encrypted, it is very useful to turn on debug
+     * information within libcurl to see what is happening during the transfer.
+     */
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
+
+    /* send the message (including headers) */
+    res = curl_easy_perform(curl);
+
+    /* free the list of recipients and clean up */
+    curl_slist_free_all(recipients);
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/examples/synctime.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * This example code only builds as-is on Windows.
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* This example code only builds as-is on Windows.
  *
  * While Unix/Linux user, you do not need this software.
  * You can achieve the same result as synctime using curl, awk and date.

docs/examples/threaded-ssl.c

@@ -1,12 +1,25 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
  *                             / __| | | | |_) | |
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
+ * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * A multi-threaded example that uses pthreads and fetches 4 remote files at
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+/* A multi-threaded example that uses pthreads and fetches 4 remote files at
  * once over HTTPS. The lock callbacks and stuff assume OpenSSL or GnuTLS
  * (libgcrypt) so far.
  *

docs/libcurl/Makefile.am

@@ -1,5 +1,24 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
 #
+# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
 
 AUTOMAKE_OPTIONS = foreign no-dependencies
 

docs/libcurl/curl_easy_duphandle.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_easy_duphandle 3 "18 September 2001" "libcurl 7.9" "libcurl Manual"
 .SH NAME
 curl_easy_duphandle - Clone a libcurl session handle

docs/libcurl/curl_easy_getinfo.3

@@ -206,6 +206,8 @@ Pass a pointer to a char pointer to receive a pointer to a string holding the
 path of the entry path. That is the initial path libcurl ended up in when
 logging on to the remote FTP server. This stores a NULL as pointer if
 something is wrong. (Added in 7.15.4)
+
+Also works for SFTP since 7.21.4
 .IP CURLINFO_CERTINFO
 Pass a pointer to a 'struct curl_certinfo *' and you'll get it set to point to
 struct that holds a number of linked lists with info about the certificate

docs/libcurl/curl_easy_init.3

@@ -1,4 +1,24 @@
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_easy_init 3 "4 March 2002" "libcurl 7.8.1" "libcurl Manual"
 .SH NAME
 curl_easy_init - Start a libcurl easy session

docs/libcurl/curl_easy_pause.3

@@ -1,4 +1,24 @@
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_easy_pause 3 "17 Dec 2007" "libcurl 7.18.0" "libcurl Manual"
 .SH NAME
 curl_easy_pause - pause and unpause a connection

docs/libcurl/curl_easy_perform.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_easy_perform 3 "5 Mar 2001" "libcurl 7.7" "libcurl Manual"
 .SH NAME
 curl_easy_perform - Perform a file transfer

docs/libcurl/curl_easy_reset.3

@@ -1,4 +1,24 @@
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_easy_reset 3 "31 July 2004" "libcurl 7.12.1" "libcurl Manual"
 .SH NAME
 curl_easy_reset - reset all options of a libcurl session handle

docs/libcurl/curl_easy_setopt.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -208,6 +208,10 @@ From 7.18.0, the function can return CURL_READFUNC_PAUSE which then will cause
 reading from this connection to become paused. See \fIcurl_easy_pause(3)\fP
 for further details.
 
+\fBBugs\fP: when doing TFTP uploads, you must return the exact amount of data
+that the callback wants, or it will be considered the final packet by the
+server end and the transfer will end there.
+
 If you set this callback pointer to NULL, or don't set it at all, the default
 internal read function will be used. It is doing an fread() on the FILE *
 userdata set with \fICURLOPT_READDATA\fP.
@@ -271,6 +275,10 @@ discretion.  Return 0 (zero) from the callback on success. Return 1 from the
 callback function to signal an unrecoverable error to the library and it will
 close the socket and return \fICURLE_COULDNT_CONNECT\fP.  (Option added in
 7.15.6.)
+
+Added in 7.21.5, the callback function may return
+\fICURL_SOCKOPT_ALREADY_CONNECTED\fP, which tells libcurl that the socket is
+in fact already connected and then libcurl will not attempt to connect it.
 .IP CURLOPT_SOCKOPTDATA
 Pass a pointer that will be untouched by libcurl and passed as the first
 argument in the sockopt callback set with \fICURLOPT_SOCKOPTFUNCTION\fP.
@@ -823,7 +831,7 @@ below. If more than one bit is set, libcurl will first query the site to see
 which authentication methods it supports and then pick the best one you allow
 it to use. For some methods, this will induce an extra network round-trip. Set
 the actual name and password with the \fICURLOPT_USERPWD\fP option or
-with the \fICURLOPT_USERNAME\fP and the \fICURLOPT_USERPASSWORD\fP options.
+with the \fICURLOPT_USERNAME\fP and the \fICURLOPT_PASSWORD\fP options.
 (Added in 7.10.6)
 .RS
 .IP CURLAUTH_BASIC
@@ -870,6 +878,29 @@ This is a meta symbol. Or this value together with a single specific auth
 value to force libcurl to probe for un-restricted auth and if not, only that
 single auth algorithm is acceptable. (Added in 7.21.3)
 .RE
+.IP CURLOPT_TLSAUTH_TYPE
+Pass a long as parameter, which is set to a bitmask, to tell libcurl which
+authentication method(s) you want it to use for TLS authentication.
+.RS
+.IP CURLOPT_TLSAUTH_SRP
+TLS-SRP authentication. Secure Remote Password authentication for TLS is
+defined in RFC 5054 and provides mutual authentication if both sides have a
+shared secret. To use TLS-SRP, you must also set the
+\fICURLOPT_TLSAUTH_USERNAME\fP and \fICURLOPT_TLSAUTH_PASSWORD\fP options.
+
+You need to build libcurl with GnuTLS or OpenSSL with TLS-SRP support for this
+to work. (Added in 7.21.4)
+.RE
+.IP CURLOPT_TLSAUTH_USERNAME
+Pass a char * as parameter, which should point to the zero-terminated username
+to use for the TLS authentication method specified with the
+\fICURLOPT_TLSAUTH_TYPE\fP option. Requires that the
+\fICURLOPT_TLS_PASSWORD\fP option also be set. (Added in 7.21.4)
+.IP CURLOPT_TLSAUTH_PASSWORD
+Pass a char * as parameter, which should point to the zero-terminated password
+to use for the TLS authentication method specified with the
+\fICURLOPT_TLSAUTH_TYPE\fP option. Requires that the
+\fICURLOPT_TLS_USERNAME\fP option also be set. (Added in 7.21.4)
 .IP CURLOPT_PROXYAUTH
 Pass a long as parameter, which is set to a bitmask, to tell libcurl which
 authentication method(s) you want it to use for your proxy authentication.  If
@@ -1189,6 +1220,10 @@ option is set to zero. (added in 7.16.2)
 Pass a pointer to a zero terminated string as parameter. It will be used to
 specify the sender address in a mail when sending an SMTP mail with libcurl.
 
+An originator email address in SMTP lingo is specified within angle brackets
+(<>) which libcurl will not add for you before version 7.21.4. Failing to
+provide such brackets may cause the server to reject your mail.
+
 (Added in 7.20.0)
 .IP CURLOPT_MAIL_RCPT
 Pass a pointer to a linked list of recipients to pass to the server in your
@@ -1644,8 +1679,8 @@ given limit. This concerns both FTP and HTTP transfers.
 .IP CURLOPT_TIMECONDITION
 Pass a long as parameter. This defines how the \fICURLOPT_TIMEVALUE\fP time
 value is treated. You can set this parameter to \fICURL_TIMECOND_IFMODSINCE\fP
-or \fICURL_TIMECOND_IFUNMODSINCE\fP. This feature applies to HTTP, FTP, and
-RTSP.
+or \fICURL_TIMECOND_IFUNMODSINCE\fP. This feature applies to HTTP, FTP, RTSP,
+and FILE.
 
 The last modification time of a file is not always known and in such instances
 this feature will have no effect even if the given time condition would not
@@ -1800,15 +1835,16 @@ resolves, by including a string in the linked list that uses the format
 \&"-HOST:PORT". The host name must be prefixed with a dash, and the host name
 and port number must exactly match what was already added previously.
 
-(Added in 7.12.3)
+(Added in 7.21.3)
 .SH SSL and SECURITY OPTIONS
 .IP CURLOPT_SSLCERT
 Pass a pointer to a zero terminated string as parameter. The string should be
 the file name of your certificate. The default format is "PEM" and can be
 changed with \fICURLOPT_SSLCERTTYPE\fP.
 
-With NSS this is the nickname of the certificate you wish to authenticate
-with.
+With NSS this can also be the nickname of the certificate you wish to
+authenticate with. If you want to use a file from the current directory, please
+precede it with "./" prefix, in order to avoid confusion with a nickname.
 .IP CURLOPT_SSLCERTTYPE
 Pass a pointer to a zero terminated string as parameter. The string should be
 the format of your certificate. Supported formats are "PEM" and "DER".  (Added
@@ -1867,28 +1903,30 @@ Force SSLv2
 Force SSLv3
 .RE
 .IP CURLOPT_SSL_VERIFYPEER
-Pass a long as parameter.
+Pass a long as parameter. By default, curl assumes a value of 1.
 
 This option determines whether curl verifies the authenticity of the peer's
-certificate. A value of 1 means curl verifies; zero means it doesn't.  The
-default is nonzero, but before 7.10, it was zero.
+certificate. A value of 1 means curl verifies; 0 (zero) means it doesn't.
 
 When negotiating an SSL connection, the server sends a certificate indicating
 its identity.  Curl verifies whether the certificate is authentic, i.e. that
 you can trust that the server is who the certificate says it is.  This trust
 is based on a chain of digital signatures, rooted in certification authority
-(CA) certificates you supply.  As of 7.10, curl installs a default bundle of
-CA certificates and you can specify alternate certificates with the
-\fICURLOPT_CAINFO\fP option or the \fICURLOPT_CAPATH\fP option.
+(CA) certificates you supply.  curl uses a default bundle of CA certificates
+(the path for that is determined at build time) and you can specify alternate
+certificates with the \fICURLOPT_CAINFO\fP option or the \fICURLOPT_CAPATH\fP
+option.
 
 When \fICURLOPT_SSL_VERIFYPEER\fP is nonzero, and the verification fails to
 prove that the certificate is authentic, the connection fails.  When the
-option is zero, the connection succeeds regardless.
+option is zero, the peer certificate verification succeeds regardless.
 
 Authenticating the certificate is not by itself very useful.  You typically
 want to ensure that the server, as authentically identified by its
 certificate, is the server you mean to be talking to.  Use
-\fICURLOPT_SSL_VERIFYHOST\fP to control that.
+\fICURLOPT_SSL_VERIFYHOST\fP to control that. The check that the host name in
+the certificate is valid for the host name you're connecting to is done
+independently of the \fICURLOPT_SSL_VERIFYPEER\fP option.
 .IP CURLOPT_CAINFO
 Pass a char * to a zero terminated string naming a file holding one or more
 certificates to verify the peer with.  This makes sense only when used in
@@ -1919,13 +1957,15 @@ mismatch with the issuer of peer certificate (\fICURLOPT_SSL_VERIFYPEER\fP has
 to be set too for the check to fail). (Added in 7.19.0)
 .IP CURLOPT_CAPATH
 Pass a char * to a zero terminated string naming a directory holding multiple
-CA certificates to verify the peer with. The certificate directory must be
-prepared using the openssl c_rehash utility. This makes sense only when used
-in combination with the \fICURLOPT_SSL_VERIFYPEER\fP option.  If
-\fICURLOPT_SSL_VERIFYPEER\fP is zero, \fICURLOPT_CAPATH\fP need not even
-indicate an accessible path.  The \fICURLOPT_CAPATH\fP function apparently
-does not work in Windows due to some limitation in openssl. This option is
-OpenSSL-specific and does nothing if libcurl is built to use GnuTLS.
+CA certificates to verify the peer with. If libcurl is built against OpenSSL,
+the certificate directory must be prepared using the openssl c_rehash utility.
+This makes sense only when used in combination with the
+\fICURLOPT_SSL_VERIFYPEER\fP option.  If \fICURLOPT_SSL_VERIFYPEER\fP is zero,
+\fICURLOPT_CAPATH\fP need not even indicate an accessible path.  The
+\fICURLOPT_CAPATH\fP function apparently does not work in Windows due to some
+limitation in openssl. This option is OpenSSL-specific and does nothing if
+libcurl is built to use GnuTLS. NSS-powered libcurl provides the option only
+for backward compatibility.
 .IP CURLOPT_CRLFILE
 Pass a char * to a zero terminated string naming a file with the concatenation
 of CRL (in PEM format) to use in the certificate validation that occurs during
@@ -1944,20 +1984,6 @@ A specific error code (CURLE_SSL_CRL_BADFILE) is defined with the option. It
 is returned when the SSL exchange fails because the CRL file cannot be loaded.
 A failure in certificate verification due to a revocation information found in
 the CRL does not trigger this specific error. (Added in 7.19.0)
-.IP CURLOPT_CERTINFO
-Pass a long set to 1 to enable libcurl's certificate chain info gatherer. With
-this enabled, libcurl (if built with OpenSSL) will extract lots of information
-and data about the certificates in the certificate chain used in the SSL
-connection. This data is then possible to extract after a transfer using
-\fIcurl_easy_getinfo(3)\fP and its option \fICURLINFO_CERTINFO\fP. (Added in
-7.19.1)
-.IP CURLOPT_RANDOM_FILE
-Pass a char * to a zero terminated file name. The file will be used to read
-from to seed the random engine for SSL. The more random the specified file is,
-the more secure the SSL connection will become.
-.IP CURLOPT_EGDSOCKET
-Pass a char * to the zero terminated path name to the Entropy Gathering Daemon
-socket. It will be used to seed the random engine for SSL.
 .IP CURLOPT_SSL_VERIFYHOST
 Pass a long as parameter.
 
@@ -1981,10 +2007,28 @@ doesn't matter what name it says.  (This is not ordinarily a useful setting).
 When the value is 0, the connection succeeds regardless of the names in the
 certificate.
 
-The default, since 7.10, is 2.
+The default value for this option is 2.
 
-This option controls checking the server's claimed identity.  The server could
-be lying.  To control lying, see \fICURLOPT_SSL_VERIFYPEER\fP.
+This option controls checking the server's certificate's claimed identity.
+The server could be lying.  To control lying, see
+\fICURLOPT_SSL_VERIFYPEER\fP.  If libcurl is built against NSS and
+\fICURLOPT_SSL_VERIFYPEER\fP is zero, \fICURLOPT_SSL_VERIFYHOST\fP
+is ignored.
+
+.IP CURLOPT_CERTINFO
+Pass a long set to 1 to enable libcurl's certificate chain info gatherer. With
+this enabled, libcurl (if built with OpenSSL) will extract lots of information
+and data about the certificates in the certificate chain used in the SSL
+connection. This data is then possible to extract after a transfer using
+\fIcurl_easy_getinfo(3)\fP and its option \fICURLINFO_CERTINFO\fP. (Added in
+7.19.1)
+.IP CURLOPT_RANDOM_FILE
+Pass a char * to a zero terminated file name. The file will be used to read
+from to seed the random engine for SSL. The more random the specified file is,
+the more secure the SSL connection will become.
+.IP CURLOPT_EGDSOCKET
+Pass a char * to the zero terminated path name to the Entropy Gathering Daemon
+socket. It will be used to seed the random engine for SSL.
 .IP CURLOPT_SSL_CIPHER_LIST
 Pass a char *, pointing to a zero terminated string holding the list of
 ciphers to use for the SSL connection. The list must be syntactically correct,
@@ -2051,7 +2095,10 @@ behavior on host and key (mis)matching. (Added in 7.19.6)
 .IP CURLOPT_SSH_KEYFUNCTION
 Pass a pointer to a curl_sshkeycallback function. It gets called when the
 known_host matching has been done, to allow the application to act and decide
-for libcurl how to proceed. It gets passed the CURL handle, the key from the
+for libcurl how to proceed. The callback will only be called if
+\fICURLOPT_SSH_KNOWNHOSTS\fP is also set.
+
+The curl_sshkeycallback function gets passed the CURL handle, the key from the
 known_hosts file, the key from the remote site, info from libcurl on the
 matching status and a custom pointer (set with \fICURLOPT_SSH_KEYDATA\fP). It
 MUST return one of the following return codes to tell libcurl how to act:

docs/libcurl/curl_easy_strerror.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_easy_strerror 3 "26 Apr 2004" "libcurl 7.12" "libcurl Manual"
 .SH NAME
 curl_easy_strerror - return string describing error code

docs/libcurl/curl_escape.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_escape 3 "6 March 2002" "libcurl 7.9" "libcurl Manual"
 .SH NAME
 curl_escape - URL encodes the given string

docs/libcurl/curl_formadd.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_formadd 3 "24 June 2002" "libcurl 7.9.8" "libcurl Manual"
 .SH NAME
 curl_formadd - add a section to a multipart/formdata HTTP POST

docs/libcurl/curl_formfree.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_formfree 3 "6 April 2001" "libcurl 7.7.1" "libcurl Manual"
 .SH NAME
 curl_formfree - free a previously build multipart/formdata HTTP POST chain

docs/libcurl/curl_formget.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_formget 3 "20 June 2006" "libcurl 7.15.5" "libcurl Manual"
 .SH NAME
 curl_formget - serialize a previously built multipart/formdata HTTP POST chain

docs/libcurl/curl_free.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_free 3 "12 Aug 2003" "libcurl 7.10" "libcurl Manual"
 .SH NAME
 curl_free - reclaim memory that has been obtained through a libcurl call

docs/libcurl/curl_getdate.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_getdate 3 "12 Aug 2005" "libcurl 7.0" "libcurl Manual"
 .SH NAME
 curl_getdate - Convert a date string to number of seconds since January 1,

docs/libcurl/curl_getenv.3

@@ -1,4 +1,24 @@
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_getenv 3 "30 April 2004" "libcurl 7.12" "libcurl Manual"
 .SH NAME
 curl_getenv - return value for environment name

docs/libcurl/curl_global_cleanup.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_global_cleanup 3 "17 Feb 2006" "libcurl 7.8" "libcurl Manual"
 .SH NAME
 curl_global_cleanup - global libcurl cleanup

docs/libcurl/curl_global_init.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_global_init 3 "11 May 2004" "libcurl 7.12" "libcurl Manual"
 .SH NAME
 curl_global_init - Global libcurl initialisation

docs/libcurl/curl_global_init_mem.3

@@ -1,6 +1,24 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_global_init_mem 3 "10 May 2004" "libcurl 7.12.0" "libcurl Manual"
 .SH NAME
 curl_global_init_mem - Global libcurl initialisation with memory callbacks

docs/libcurl/curl_mprintf.3

@@ -1,4 +1,24 @@
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_printf 3 "30 April 2004" "libcurl 7.12" "libcurl Manual"
 .SH NAME
 curl_maprintf, curl_mfprintf, curl_mprintf, curl_msnprintf, curl_msprintf

docs/libcurl/curl_multi_add_handle.3

@@ -1,4 +1,24 @@
-.\"
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
 .TH curl_multi_add_handle 3 "4 March 2002" "libcurl 7.9.5" "libcurl Manual"
 .SH NAME
 curl_multi_add_handle - add an easy handle to a multi session