RELEASE-NOTES: synced with ecd624b8e7

Do not match the trailing '\n' in the regular expression as this would
make us dump a ) parenthesis on a new line.

This fixes the following error:

would get transformed into:

)

Bug: http://curl.haxx.se/mail/lib-2010-10/0065.html
Reported by: Dimitre Dimitrov

.gitignore

@@ -5,6 +5,7 @@
 *.dll
 *.exe
 *.obj
+*.asc
 .*.swp
 Debug
 Release
@@ -26,6 +27,9 @@ curl-config
 libcurl.pc
 missing
 curl-*.tar.gz
+curl-*.tar.bz2
+curl-*.tar.lzma
+curl-*.zip
 INSTALL
 install-sh
 *.o
@@ -36,3 +40,4 @@ tags
 TAGS
 *~
 aclocal.m4.bak
+CHANGES.dist

Android.mk

@@ -2,7 +2,7 @@
 #
 # Place the curl source (including this makefile) into external/curl/ in the
 # Android source tree.  Then build them with 'make curl' or just 'make libcurl'
-# from the Android root. Tested with Android 1.5
+# from the Android root. Tested with Android 1.5 and 2.1
 #
 # Note: you must first create a curl_config.h file by running configure in the
 # Android environment. The only way I've found to do this is tricky. Perform a
@@ -12,26 +12,37 @@
 # shown. Now, from the external/curl/ directory, run curl's normal configure
 # command with flags that match what Android itself uses. This will mean
 # putting the compiler directory into the PATH, putting the -I, -isystem and
-# -D options into CPPFLAGS, putting the -m, -f, -O and -nostdlib options into
-# CFLAGS, and putting the -Wl, -L and -l options into LIBS, along with the path
-# to the files libgcc.a, crtbegin_dynamic.o, and ccrtend_android.o. Remember
-# that the paths must be absolute since you will not be running configure from
-# the same directory as the Android make.  The normal cross-compiler options
-# must also be set.
+# -D options into CPPFLAGS, putting the -W, -m, -f, -O and -nostdlib options
+# into CFLAGS, and putting the -Wl, -L and -l options into LIBS, along with the
+# path to the files libgcc.a, crtbegin_dynamic.o, and ccrtend_android.o.
+# Remember that the paths must be absolute since you will not be running
+# configure from the same directory as the Android make.  The normal
+# cross-compiler options must also be set. Note that the -c, -o, -MD and
+# similar flags must not be set.
+#
+# To see all the LIBS options, you'll need to do the "showcommands" trick on an
+# executable that's already buildable and watch what flags Android uses to link
+# it (dhcpcd is a good choice to watch). You'll also want to add -L options to
+# LIBS that point to the out/.../obj/lib/ and out/.../obj/system/lib/
+# directories so that additional libraries can be found and used by curl.
 #
 # The end result will be a configure command that looks something like this
-# (the environment variable A is set to the Android root path):
+# (the environment variable A is set to the Android root path which makes the
+# command shorter):
 #
 #  A=`realpath ../..` && \
 #  PATH="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/bin:$PATH" \
 #  ./configure --host=arm-linux CC=arm-eabi-gcc \
 #  CPPFLAGS="-I $A/system/core/include ..." \
-#  CFLAGS="-fno-exceptions -Wno-multichar ..." \
-#  LIB="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/lib/gcc/arm-eabi/X\
-#  /interwork/libgcc.a ..." \
+#  CFLAGS="-nostdlib -fno-exceptions -Wno-multichar ..." \
+#  LIBS="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/lib/gcc/arm-eabi/X\
+#  /interwork/libgcc.a ..."
+#
+# Finally, copy the file COPYING to NOTICE so that the curl license gets put
+# into the right place (but see the note about this below).
 #
 # Dan Fandrich
-# September 2009
+# August 2010
 
 LOCAL_PATH:= $(call my-dir)
 
@@ -63,6 +74,14 @@ LOCAL_COPY_HEADERS := $(addprefix include/curl/,$(CURL_HEADERS))
 
 LOCAL_MODULE:= libcurl
 
+# Copy the licence to a place where Android will find it.
+# Actually, this doesn't quite work because the build system searches
+# for NOTICE files before it gets to this point, so it will only be seen
+# on subsequent builds.
+ALL_PREBUILT += $(LOCAL_PATH)/NOTICE
+$(LOCAL_PATH)/NOTICE: $(LOCAL_PATH)/COPYING | $(ACP)
+	$(copy-file-to-target)
+
 include $(BUILD_STATIC_LIBRARY)
 
 
@@ -71,7 +90,7 @@ include $(BUILD_STATIC_LIBRARY)
 
 include $(CLEAR_VARS)
 include $(LOCAL_PATH)/src/Makefile.inc
-LOCAL_SRC_FILES := $(addprefix src/,$(CURL_SOURCES))
+LOCAL_SRC_FILES := $(addprefix src/,$(CURL_CFILES))
 
 LOCAL_MODULE := curl
 LOCAL_STATIC_LIBRARIES := libcurl
@@ -79,8 +98,8 @@ LOCAL_SYSTEM_SHARED_LIBRARIES := libc
 
 LOCAL_C_INCLUDES += $(LOCAL_PATH)/include $(LOCAL_PATH)/lib
 
-# This will also need to include $(CURLX_ONES) in order to correctly build
-# a dynamic library
+# This may also need to include $(CURLX_ONES) in order to correctly link
+# if libcurl is changed to be built as a dynamic library
 LOCAL_CFLAGS += $(common_CFLAGS)
 
 include $(BUILD_EXECUTABLE)

CMakeLists.txt

@@ -120,16 +120,11 @@ if(WIN32)
   if( NOT HAVE_WLDAP32)
     set(CURL_DISABLE_LDAP ON CACHE BOOL "" FORCE)
     message(STATUS "wldap32 not found CURL_DISABLE_LDAP set ON")
-    option(CURL_LDAP_WIN "Use W$ LDAP implementation" OFF)
+    option(CURL_LDAP_WIN "Use Windows LDAP implementation" OFF)
   else()
-    option(CURL_LDAP_WIN "Use W$ LDAP implementation" ON)
+    option(CURL_LDAP_WIN "Use Windows LDAP implementation" ON)
   endif()
   mark_as_advanced(CURL_LDAP_WIN)
-  set(CURL_LDAP_HYBRID OFF)
-else()
-  option(CURL_LDAP_HYBRID "W$ LDAP with non-W$ compiler" OFF)
-  mark_as_advanced(CURL_LDAP_HYBRID)
-  set(CURL_LDAP_WIN OFF)
 endif()
 
 if(HTTP_ONLY)
@@ -836,7 +831,7 @@ function(TRANSFORM_MAKEFILE_INC INPUT_FILE OUTPUT_FILE)
   string(REPLACE "$(top_builddir)" "\${CURL_BINARY_DIR}" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})
 
   string(REGEX REPLACE "\\\\\n" "<22>!<21>" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})
-  string(REGEX REPLACE "([a-zA-Z_][a-zA-Z0-9_]*)[\t ]*=[\t ]*([^\n]*\n)" "SET(\\1 \\2)\n" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})
+  string(REGEX REPLACE "([a-zA-Z_][a-zA-Z0-9_]*)[\t ]*=[\t ]*([^\n]*)" "SET(\\1 \\2)" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})
   string(REPLACE "<22>!<21>" "\n" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})
 
   string(REGEX REPLACE "\\$\\(([a-zA-Z_][a-zA-Z0-9_]*)\\)" "\${\\1}" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})    # Replace $() with ${}

MacOSX-Framework

@@ -1,26 +1,76 @@
 #!/bin/bash
 # This script performs all of the steps needed to build a
 # universal binary libcurl.framework for Mac OS X 10.4 or greater.
+#
+# Hendrik Visage:
+#  Generalizations added since  Snowleopard (10.6) do not include
+# the 10.4u SDK.
+#
+# Also note:
+# 10.5 is the *ONLY* SDK that support PPC64 :( -- 10.6 do not have ppc64 support
+#If you need to have PPC64 support then change below to 1
+PPC64_NEEDED=0
+
+# For me the default is to develop for the platform I am on, and if you
+#desire compatibility with older versions then change USE_OLD to 1 :)
+USE_OLD=0
 
 VERSION=`/usr/bin/sed -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' include/curl/curlver.h`
+FRAMEWORK_VERSION=Versions/Release-$VERSION
 
-SDK32='/Developer/SDKs/MacOSX10.4u.sdk'
+#I also wanted to "copy over" the system, and thus the reason I added the
+# version to Versions/Release-7.20.1 etc.
+# now a simple rsync -vaP libcurl.framework /Library/Frameworks will install it
+# and setup the right paths to this version, leaving the system version
+# "intact", so you can "fix" it later with the links to Versions/A/...
 
-MINVER32='-mmacosx-version-min=10.4'
 
-ARCHES32='-arch ppc -arch i386'
+OLD_SDK=`ls  /Developer/SDKs|head -1`
+NEW_SDK=`ls -r /Developer/SDKs|head -1`
 
-SDK64='/Developer/SDKs/MacOSX10.5.sdk'
+if test "0"$USE_OLD -gt 0
+then
+ SDK32=$OLD_SDK
+else
+ SDK32=$NEW_SDK
+fi
 
-MINVER64='-mmacosx-version-min=10.5'
+MACVER=`echo $SDK32|sed -e s/[a-zA-Z]//g -e s/.\$//`
 
-ARCHES64='-arch ppc64 -arch x86_64'
+SDK32_DIR='/Developer/SDKs/'$SDK32
+MINVER32='-mmacosx-version-min='$MACVER
+ARCHES32='-arch i386 -arch ppc'
 
-if test -d $SDK32; then
+
+if test $PPC64_NEEDED -gt 0
+then
+  SDK64=10.5
+  ARCHES64='-arch x86_64 -arch ppc64'
+  SDK64=`ls  /Developer/SDKs|grep 10.5|head -1`
+else
+ ARCHES64='-arch x86_64'
+ #We "know" that 10.4 and earlier do not support 64bit
+ OLD_SDK64=`ls  /Developer/SDKs|egrep -v "10.[0-4]"|head -1`
+ NEW_SDK64=`ls -r /Developer/SDKs|egrep -v "10.[0-4]"|head -1`
+ if test $USE_OLD -gt 0
+  then
+   SDK64=$OLD_SDK64
+  else
+   SDK64=$NEW_SDK64
+  fi
+fi
+
+SDK64_DIR='/Developer/SDKs/'$SDK64
+MACVER64=`echo $SDK64|sed -e s/[a-zA-Z]//g -e s/.\$//`
+
+MINVER64='-mmacosx-version-min='$MACVER64
+
+if test ! -z $SDK32; then
   echo "----Configuring libcurl for 32 bit universal framework..."
+  make clean
   ./configure --disable-dependency-tracking --disable-static --with-gssapi \
-    CFLAGS="-Os -isysroot $SDK32 $ARCHES32 $MINVER32" \
-    LDFLAGS="-Wl,-syslibroot,$SDK32 $ARCHES32 $MINVER32 -Wl,-headerpad_max_install_names" \
+    CFLAGS="-Os -isysroot $SDK32_DIR $ARCHES32 $MINVER32" \
+    LDFLAGS="-Wl,-syslibroot,$SDK32_DIR $ARCHES32 $MINVER32 -Wl,-headerpad_max_install_names" \
     CC=$CC
 
   echo "----Building 32 bit libcurl..."
@@ -28,40 +78,43 @@ if test -d $SDK32; then
 
   echo "----Creating 32 bit framework..."
   rm -r libcurl.framework
-  mkdir -p libcurl.framework/Versions/A/Resources
-  cp lib/.libs/libcurl.dylib libcurl.framework/Versions/A/libcurl
-  install_name_tool -id @executable_path/../Frameworks/libcurl.framework/Versions/A/libcurl libcurl.framework/Versions/A/libcurl
-  /usr/bin/sed -e "s/7\.12\.3/$VERSION/" lib/libcurl.plist >libcurl.framework/Versions/A/Resources/Info.plist
-  mkdir -p libcurl.framework/Versions/A/Headers/curl
-  cp include/curl/*.h libcurl.framework/Versions/A/Headers/curl
+  mkdir -p libcurl.framework/${FRAMEWORK_VERSION}/Resources
+  cp lib/.libs/libcurl.dylib libcurl.framework/${FRAMEWORK_VERSION}/libcurl
+  install_name_tool -id @executable_path/../Frameworks/libcurl.framework/${FRAMEWORK_VERSION}/libcurl libcurl.framework/${FRAMEWORK_VERSION}/libcurl
+  /usr/bin/sed -e "s/7\.12\.3/$VERSION/" lib/libcurl.plist >libcurl.framework/${FRAMEWORK_VERSION}/Resources/Info.plist
+  mkdir -p libcurl.framework/${FRAMEWORK_VERSION}/Headers/curl
+  cp include/curl/*.h libcurl.framework/${FRAMEWORK_VERSION}/Headers/curl
   pushd libcurl.framework
-  ln -fs Versions/A/libcurl libcurl
-  ln -fs Versions/A/Resources Resources
-  ln -fs Versions/A/Headers Headers
+  ln -fs ${FRAMEWORK_VERSION}/libcurl libcurl
+  ln -fs ${FRAMEWORK_VERSION}/Resources Resources
+  ln -fs ${FRAMEWORK_VERSION}/Headers Headers
   cd Versions
-  ln -fs A Current
+  ln -fs ${FRAMEWORK_VERSION} Current
 
-  if test -d $SDK64; then
+  echo TEsting for SDK64
+  if test -d $SDK64_DIR; then
+  echo entering...
     popd
     make clean
     echo "----Configuring libcurl for 64 bit universal framework..."
     ./configure --disable-dependency-tracking --disable-static --with-gssapi \
-      CFLAGS="-Os -isysroot $SDK64 $ARCHES64 $MINVER64" \
-      LDFLAGS="-Wl,-syslibroot,$SDK64 $ARCHES64 $MINVER64 -Wl,-headerpad_max_install_names" \
+      CFLAGS="-Os -isysroot $SDK64_DIR $ARCHES64 $MINVER64" \
+      LDFLAGS="-Wl,-syslibroot,$SDK64_DIR $ARCHES64 $MINVER64 -Wl,-headerpad_max_install_names" \
       CC=$CC
 
     echo "----Building 64 bit libcurl..."
     make
 
     echo "----Appending 64 bit framework to 32 bit framework..."
-    cp lib/.libs/libcurl.dylib libcurl.framework/Versions/A/libcurl64
-    install_name_tool -id @executable_path/../Frameworks/libcurl.framework/Versions/A/libcurl libcurl.framework/Versions/A/libcurl64
-    cp libcurl.framework/Versions/A/libcurl libcurl.framework/Versions/A/libcurl32
-    lipo libcurl.framework/Versions/A/libcurl32 libcurl.framework/Versions/A/libcurl64 -create -output libcurl.framework/Versions/A/libcurl
-    rm libcurl.framework/Versions/A/libcurl32 libcurl.framework/Versions/A/libcurl64
-    cp libcurl.framework/Versions/A/Headers/curl/curlbuild.h libcurl.framework/Versions/A/Headers/curl/curlbuild32.h
-    cp include/curl/curlbuild.h libcurl.framework/Versions/A/Headers/curl/curlbuild64.h
-    cat >libcurl.framework/Versions/A/Headers/curl/curlbuild.h <<EOF
+    cp lib/.libs/libcurl.dylib libcurl.framework/${FRAMEWORK_VERSION}/libcurl64
+    install_name_tool -id @executable_path/../Frameworks/libcurl.framework/${FRAMEWORK_VERSION}/libcurl libcurl.framework/${FRAMEWORK_VERSION}/libcurl64
+    cp libcurl.framework/${FRAMEWORK_VERSION}/libcurl libcurl.framework/${FRAMEWORK_VERSION}/libcurl32
+    pwd
+    lipo libcurl.framework/${FRAMEWORK_VERSION}/libcurl32 libcurl.framework/${FRAMEWORK_VERSION}/libcurl64 -create -output libcurl.framework/${FRAMEWORK_VERSION}/libcurl
+    rm libcurl.framework/${FRAMEWORK_VERSION}/libcurl32 libcurl.framework/${FRAMEWORK_VERSION}/libcurl64
+    cp libcurl.framework/${FRAMEWORK_VERSION}/Headers/curl/curlbuild.h libcurl.framework/${FRAMEWORK_VERSION}/Headers/curl/curlbuild32.h
+    cp include/curl/curlbuild.h libcurl.framework/${FRAMEWORK_VERSION}/Headers/curl/curlbuild64.h
+    cat >libcurl.framework/${FRAMEWORK_VERSION}/Headers/curl/curlbuild.h <<EOF
 #ifdef __LP64__
 #include "curl/curlbuild64.h"
 #else
@@ -70,9 +123,10 @@ if test -d $SDK32; then
 EOF
   fi
 
-  lipo -info libcurl.framework/Versions/A/libcurl
+  pwd
+  lipo -info libcurl.framework/${FRAMEWORK_VERSION}/libcurl
   echo "libcurl.framework is built and can now be included in other projects."
   echo "Copy libcurl.framework to your bundle's Contents/Frameworks folder, ~/Library/Frameworks or /Library/Frameworks."
 else
-  echo "Building libcurl.framework requires Mac OS X 10.4 or later with the MacOSX10.4u SDK installed."
+  echo "Building libcurl.framework requires Mac OS X 10.4 or later with the MacOSX10.4/5/6 SDK installed."
 fi

Makefile.dist

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -54,17 +54,23 @@ borland-clean:
 	cd ..\src
 	make -f Makefile.b32 clean
 
-watcom:
+watcom: .SYMBOLIC
 	cd lib
-	wmake -f Makefile.Watcom
+	wmake -u -f Makefile.Watcom
 	cd ..\src
-	wmake -f Makefile.Watcom
+	wmake -u -f Makefile.Watcom
 
-watcom-clean:
+watcom-clean: .SYMBOLIC
 	cd lib
-	wmake -f Makefile.Watcom clean
+	wmake -u -f Makefile.Watcom clean
 	cd ..\src
-	wmake -f Makefile.Watcom clean
+	wmake -u -f Makefile.Watcom clean
+
+watcom-vclean: .SYMBOLIC
+	cd lib
+	wmake -u -f Makefile.Watcom vclean
+	cd ..\src
+	wmake -u -f Makefile.Watcom vclean
 
 mingw32:
 	$(MAKE) -C lib -f Makefile.m32
@@ -90,13 +96,13 @@ mingw32-clean:
 	$(MAKE) -C lib -f Makefile.m32 clean
 	$(MAKE) -C src -f Makefile.m32 clean
 
-vc-clean:
+vc-clean: $(VC)
 	cd lib
 	nmake -f Makefile.$(VC) clean
 	cd ..\src
 	nmake -f Makefile.$(VC) clean
 
-vc-all:
+vc-all: $(VC)
 	cd lib
 	nmake -f Makefile.$(VC) cfg=release
 	nmake -f Makefile.$(VC) cfg=release-ssl
@@ -121,85 +127,85 @@ vc-all:
 	nmake -f Makefile.$(VC) cfg=debug-dll-zlib-dll
 	nmake -f Makefile.$(VC) cfg=debug-dll-ssl-dll-zlib-dll
 
-vc:
+vc: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release
 	cd ..\src
 	nmake /f Makefile.$(VC)
 
-vc-x64:
+vc-x64: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) MACHINE=x64 cfg=release
 	cd ..\src
 	nmake /f Makefile.$(VC) MACHINE=x64 cfg=release
 
-vc-zlib:
+vc-zlib: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-zlib
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-zlib
 
-vc-ssl:
+vc-ssl: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-ssl
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-ssl
 
-vc-ssl-zlib:
+vc-ssl-zlib: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-ssl-zlib
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-ssl-zlib
 
-vc-x64-ssl-zlib:
+vc-x64-ssl-zlib: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib
 	cd ..\src
 	nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib
 
-vc-ssl-dll:
+vc-ssl-dll: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-ssl-dll
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-ssl-dll
 
-vc-dll-ssl-dll:
+vc-dll-ssl-dll: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-dll-ssl-dll
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-dll-ssl-dll
 
-vc-dll:
+vc-dll: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-dll
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-dll
 
-vc-dll-zlib-dll:
+vc-dll-zlib-dll: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-dll-zlib-dll
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-dll-zlib-dll
 
-vc-dll-ssl-dll-zlib-dll:
+vc-dll-ssl-dll-zlib-dll: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-dll-ssl-dll-zlib-dll
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-dll-ssl-dll-zlib-dll
 
-vc-ssl-dll-zlib-dll:
+vc-ssl-dll-zlib-dll: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-ssl-dll-zlib-dll
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-ssl-dll-zlib-dll
 
-vc-zlib-dll:
+vc-zlib-dll: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release-zlib-dll
 	cd ..\src
 	nmake /f Makefile.$(VC) cfg=release-zlib-dll
 
-vc-sspi:
+vc-sspi: $(VC)
 	cd lib
 	nmake /f Makefile.$(VC) cfg=release WINDOWS_SSPI=1
 	cd ..\src
@@ -261,27 +267,40 @@ linux: all
 
 linux-ssl: ssl
 
+# We don't need to do anything for vc6.
+vc6:
 
 vc8: lib/Makefile.vc8 src/Makefile.vc8
 
 lib/Makefile.vc8: lib/Makefile.vc6
 	@echo "generate $@"
-	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/wsock32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" lib/Makefile.vc6 > lib/Makefile.vc8
+	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" lib/Makefile.vc6 > lib/Makefile.vc8
 
 src/Makefile.vc8: src/Makefile.vc6
 	@echo "generate $@"
-	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/wsock32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" src/Makefile.vc6 > src/Makefile.vc8
+	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" src/Makefile.vc6 > src/Makefile.vc8
 
 # VC9 makefiles are for use with VS2008
 vc9: lib/Makefile.vc9 src/Makefile.vc9
 
 lib/Makefile.vc9: lib/Makefile.vc6
 	@echo "generate $@"
-	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" lib/Makefile.vc6 > lib/Makefile.vc9
+	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" lib/Makefile.vc6 > lib/Makefile.vc9
 
 src/Makefile.vc9: src/Makefile.vc6
 	@echo "generate $@"
-	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" src/Makefile.vc6 > src/Makefile.vc9
+	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" src/Makefile.vc6 > src/Makefile.vc9
+
+# VC10 makefiles are for use with VS2010
+vc10: lib/Makefile.vc10 src/Makefile.vc10
+
+lib/Makefile.vc10: lib/Makefile.vc6
+	@echo "generate $@"
+	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc10/g" -e "s/VC6/VC10/g" lib/Makefile.vc6 > lib/Makefile.vc10
+
+src/Makefile.vc10: src/Makefile.vc6
+	@echo "generate $@"
+	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc10/g" -e "s/VC6/VC10/g" src/Makefile.vc6 > src/Makefile.vc10
 
 ca-bundle: lib/mk-ca-bundle.pl
 	@echo "generate a fresh ca-bundle.crt"

RELEASE-NOTES

@@ -1,51 +1,61 @@
-Curl and libcurl 7.20.1
+Curl and libcurl 7.21.2
 
- Public curl releases:         115
- Command line options:         136
- curl_easy_setopt() options:   174
+ Public curl releases:         118
+ Command line options:         138
+ curl_easy_setopt() options:   180
  Public functions in libcurl:  58
  Known libcurl bindings:       39
- Contributors:                 776
+ Contributors:                 817
 
 This release includes the following changes:
 
- o The 'ares' subtree has been removed from the source repository
- o smoother rate limiting
- o allow user+password in the URL for all protocols
- o POP3: Get message listing if no mailbox in URL
+ o curl -T: ignore file size of special files
+ o Added GOPHER protocol support
+ o Added mk-ca-bundle.vbs script
+ o c-ares build now requires c-ares >= 1.6.0
 
 This release includes the following bugfixes:
 
- o VMS builder bad behavior when used in a batch job
- o multiple recepients with SMTP
- o fixed the CURL_FORMAT_* defines when building with cmake
- o missing quote in libcurl.m4
- o SMTP: now waits for 250 after the DATA transfer
- o SMTP: use angle brackets in RCPT TO
- o curl --trace-time not using local time
- o off-by-one in the chunked encoding trailer parser
- o superfluous blocking for OpenSSL-based SSL connects and multi interface
- o TFTP upload
- o FTP timeouts after file transferred completely
- o skip poll() on Interix
- o CURLOPT_CERTINFO memory leak
- o sub-second timeouts improvements
- o configure fixes for GSSAPI
- o threaded resolver double free when closing curl handle
- o configure fixes for building with the clang compiler
- o easy interix rate limiting logic
- o curl_multi_remove_handle() caused use after free
- o TFTP improved error codes
- o TFTP fixed TSIZE handling for uploads
- o SSL possible double free when reusing curl handle
- o alarm()-based DNS timeout bug
- o re-used FTP connection multi interface crash
- o chunked-encoding with Content-Length: header problem
- o multi interface HTTP POST over a proxy using PROXYTUNNEL
- o RTSP GET_PARAMETER
- o timeout after last data chunk was handled
- o SFTP download hang
- o FTP quote commands prefixed with '*' now can fail without aborting
+ o --remote-header-name security vulnerability fixed:
+   http://curl.haxx.se/docs/adv_20101013.html
+
+ o multi: support the timeouts correctly, fixes known bug #62
+ o multi: use timeouts properly for MAX_RECV/SEND_SPEED
+ o negotiation: Wrong proxy authorization
+ o multi: avoid sending multiple complete messages
+ o cmdline: make -F type= accept ;charset=
+ o RESUME_FROM: clarify what ftp uploads do
+ o http: handle trailer headers in all chunked responses
+ o Curl_is_connected: use correct errno
+ o Added SSPI build to Watcom makefile
+ o progress: callback for POSTs less than MAX_INITIAL_POST_SIZE
+ o linking problem on Fedora 13
+ o Link curl and the test apps with -lrt explicitly when necessary
+ o chunky parser: only rewind stream internally if needed
+ o remote-header-name: don't output filename when NULL
+ o Curl_timeleft: avoid returning "no timeout" by mistake
+ o timeout: use the correct start value as offset
+ o FTP: fix wrong timeout trigger
+ o buildconf got better output on failures
+ o rtsp: avoid SIGSEGV on malformed header
+ o LDAP: Support for tunnelling queries through HTTP proxy
+ o configure's --enable-werror had a bashism
+ o test565: Don't hardcode IP:PORT
+ o configure: check for gcrypt if using GnuTLS
+ o configure: don't enable RTMP if the lib detect fails
+ o curl_easy_duphandle: clone the c-ares handle correctly
+ o MacOSX-Framework: updates for Snowleopard
+ o support URL containing colon without trailing port number
+ o parsedate: allow time specified without seconds
+ o curl_easy_escape: don't escape "unreserved" characters
+ o SFTP: avoid downloading negative sizes
+ o Lots of GSS/KRB FTP fixes
+ o TFTP: Work around tftpd-hpa upload bug
+ o libcurl.m4: several fixes
+ o HTTP: remove special case for 416
+ o examples: use example.com in example URLs
+ o globbing: fix crash on unballanced open brace
+ o cmake: build fixed
 
 This release includes the following known bugs:
 
@@ -54,11 +64,10 @@ This release includes the following known bugs:
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Steven M. Schweda, Yang Tse, Jack Zhang, Tom Donovan, Martin Hager,
- Daniel Fandrich, Patrick Monnerat, Pat Ray, Wesley Miaw, Ben Greear,
- Ryan Chan, Markus Duft, Andrei Benea, Jacob Moshenko, Daniel Johnson,
- Constantine Sapuntzakis, Douglas Steinwand, Thomas Lopatic, Hauke Duden,
- Akos Pasztory, Kenny To, Christopher Conroy, Massimo Callegari,
- Bob Richmond, Matt Wixson
+ Kamil Dudka, Ben Greear, Cameron Kaiser, Dan Fandrich, Dirk Manske,
+ Guenter Knauf, Julien Chaffraix, Quanah Gibson-Mount, Tor Arntsen,
+ Peter Pentchev, James Bursa, Fabian Keil, Michal Gorny, Mauro Iorio,
+ Hendrik Visage, Ning Dong, David McCreedy, Patrick Monnerat,
+ Tim Newsome, Dan Locks, Vlad Ureche, Dimitre Dimitrov
 
         Thanks! (and sorry if I forgot to mention someone)

TODO-RELEASE

@@ -1,4 +1,17 @@
-To be addressed in 7.20.1 (planned release: April 2010)
+To be addressed in 7.21.2
 =========================
 
-261 - 
+268 - 3076430 SFTP resume with 4GB file does not work
+
+271 -
+
+To be addressed in 7.21.3
+=========================
+
+262 - Manual setting of TLS Server Name Indication - use Host:
+
+263 - Support binding DNS to local interface/IP
+
+265 - 1. FTP cmd channel and data channel validation
+
+267 - 2. Cert chain for data channel

acinclude.m4

@@ -2145,6 +2145,7 @@ AC_DEFUN([CURL_CHECK_LIBS_CLOCK_GETTIME_MONOTONIC], [
         else
           LIBS="$curl_cv_gclk_LIBS $curl_cv_save_LIBS"
         fi
+        CURL_LIBS="$CURL_LIBS $curl_cv_gclk_LIBS"
         AC_MSG_RESULT([$curl_cv_gclk_LIBS])
         ac_cv_func_clock_gettime="yes"
         ;;

buildconf

@@ -6,7 +6,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -33,6 +33,17 @@ die(){
 findtool(){
   file="$1"
 
+  if { echo $file | grep "/" >/dev/null 2>&1; } then
+    # we only check for the explicit file name if the file is given
+    # including a slash. Use ./ for current dir. Previously this would
+    # otherwise always cause findtool to search the local dir first, which
+    # is wrong.
+    if test -f "$file"; then
+      echo "$file"
+      return
+    fi
+  fi
+
   old_IFS=$IFS; IFS=':'
   for path in $PATH
   do
@@ -237,13 +248,17 @@ fi
 #--------------------------------------------------------------------------
 # m4 check
 #
-m4=`${M4:-m4} --version 2>/dev/null|head -n 1`;
+m4=`(${M4:-m4} --version || ${M4:-gm4} --version) 2>/dev/null | head -n 1`;
 m4_version=`echo $m4 | sed -e 's/^.* \([0-9]\)/\1/' -e 's/[a-z]* *$//'`
 
 if { echo $m4 | grep "GNU" >/dev/null 2>&1; } then
   echo "buildconf: GNU m4 version $m4_version (ok)"
 else
+  if test -z "$m4"; then
+    echo "buildconf: m4 version not recognized. You need a GNU m4 installed!"
+  else
     echo "buildconf: m4 version $m4 found. You need a GNU m4 installed!"
+  fi
   exit 1
 fi
 

configure.ac

@@ -24,7 +24,7 @@ dnl Process this file with autoconf to produce a configure script.
 AC_PREREQ(2.57)
 
 dnl We don't know the version number "statically" so we use a dash here
-AC_INIT([curl], [-], [a suitable curl mailing list => http://curl.haxx.se/mail/])
+AC_INIT([curl], [-], [a suitable curl mailing list: http://curl.haxx.se/mail/])
 
 CURL_OVERRIDE_AUTOCONF
 
@@ -40,6 +40,7 @@ AM_MAINTAINER_MODE
 CURL_CHECK_OPTION_DEBUG
 CURL_CHECK_OPTION_OPTIMIZE
 CURL_CHECK_OPTION_WARNINGS
+CURL_CHECK_OPTION_WERROR
 CURL_CHECK_OPTION_CURLDEBUG
 CURL_CHECK_OPTION_ARES
 
@@ -51,33 +52,48 @@ CURL_CHECK_PATH_SEPARATOR_REQUIRED
 CONFIGURE_OPTIONS="\"$ac_configure_args\""
 AC_SUBST(CONFIGURE_OPTIONS)
 
+CURL_CFLAG_EXTRAS=""
+if test X"$want_werror" = Xyes; then
+  CURL_CFLAG_EXTRAS="-Werror"
+fi
+AC_SUBST(CURL_CFLAG_EXTRAS)
+
 dnl SED is mandatory for configure process and libtool.
 dnl Set it now, allowing it to be changed later.
-AC_PATH_PROG([SED], [sed], [not_found],
+if test -z "$SED"; then
+  dnl allow it to be overridden
+  AC_PATH_PROG([SED], [sed], [not_found],
     [$PATH:/usr/bin:/usr/local/bin])
-if test -z "$SED" || test "$SED" = "not_found"; then
+  if test -z "$SED" || test "$SED" = "not_found"; then
     AC_MSG_ERROR([sed not found in PATH. Cannot continue without sed.])
+  fi
 fi
 AC_SUBST([SED])
 
 dnl GREP is mandatory for configure process and libtool.
 dnl Set it now, allowing it to be changed later.
-AC_PATH_PROG([GREP], [grep], [not_found],
+if test -z "$GREP"; then
+  dnl allow it to be overridden
+  AC_PATH_PROG([GREP], [grep], [not_found],
     [$PATH:/usr/bin:/usr/local/bin])
-if test -z "$GREP" || test "$GREP" = "not_found"; then
+  if test -z "$GREP" || test "$GREP" = "not_found"; then
     AC_MSG_ERROR([grep not found in PATH. Cannot continue without grep.])
+  fi
 fi
 AC_SUBST([GREP])
 
 dnl EGREP is mandatory for configure process and libtool.
 dnl Set it now, allowing it to be changed later.
-if echo a | ($GREP -E '(a|b)') >/dev/null 2>&1; then
+if test -z "$EGREP"; then
+  dnl allow it to be overridden
+  if echo a | ($GREP -E '(a|b)') >/dev/null 2>&1; then
     AC_MSG_CHECKING([for egrep])
     EGREP="$GREP -E"
     AC_MSG_RESULT([$EGREP])
-else
+  else
     AC_PATH_PROG([EGREP], [egrep], [not_found],
       [$PATH:/usr/bin:/usr/local/bin])
+  fi
 fi
 if test -z "$EGREP" || test "$EGREP" = "not_found"; then
   AC_MSG_ERROR([egrep not found in PATH. Cannot continue without egrep.])
@@ -86,10 +102,13 @@ AC_SUBST([EGREP])
 
 dnl AR is mandatory for configure process and libtool.
 dnl This is target dependent, so check it as a tool.
-AC_PATH_TOOL([AR], [ar], [not_found],
+if test -z "$AR"; then
+  dnl allow it to be overridden
+  AC_PATH_TOOL([AR], [ar], [not_found],
     [$PATH:/usr/bin:/usr/local/bin])
-if test -z "$AR" || test "$AR" = "not_found"; then
+  if test -z "$AR" || test "$AR" = "not_found"; then
     AC_MSG_ERROR([ar not found in PATH. Cannot continue without ar.])
+  fi
 fi
 AC_SUBST([AR])
 
@@ -121,13 +140,13 @@ AC_SUBST(PKGADD_VENDOR)
 
 dnl
 dnl initialize all the info variables
-    curl_ssl_msg="no      (--with-ssl / --with-gnutls / --with-nss)"
+    curl_ssl_msg="no      (--with-{ssl,gnutls,nss,polarssl} )"
     curl_ssh_msg="no      (--with-libssh2)"
    curl_zlib_msg="no      (--with-zlib)"
    curl_krb4_msg="no      (--with-krb4*)"
     curl_gss_msg="no      (--with-gssapi)"
  curl_spnego_msg="no      (--with-spnego)"
-   curl_ares_msg="no      (--enable-ares)"
+    curl_res_msg="default (--enable-ares / --enable-threaded-resolver)"
    curl_ipv6_msg="no      (--enable-ipv6)"
     curl_idn_msg="no      (--with-libidn)"
  curl_manual_msg="no      (--enable-manual)"
@@ -136,6 +155,7 @@ curl_verbose_msg="enabled (--disable-verbose)"
    curl_ldap_msg="no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)"
   curl_ldaps_msg="no      (--enable-ldaps)"
    curl_rtsp_msg="no      (--enable-rtsp)"
+   curl_rtmp_msg="no      (--with-librtmp)"
 
 dnl
 dnl Save anything in $LIBS for later
@@ -208,6 +228,9 @@ case $host in
 esac
 AC_MSG_RESULT($mimpure)
 AM_CONDITIONAL(MIMPURE, test x$mimpure = xyes)
+
+dnl 'STATICLIB' is, in spite of its name, not generic but only for static-only
+dnl builds on Windows
 AM_CONDITIONAL(STATICLIB, false)
 
 AC_MSG_CHECKING([if we need BUILDING_LIBCURL])
@@ -369,29 +392,11 @@ AC_HELP_STRING([--disable-ldap],[Disable LDAP support]),
        AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
        AC_SUBST(CURL_DISABLE_LDAP, [1])
        ;;
-  *)
-       case $host in
-         *-*-cygwin*)
-           # Force no ldap. config/build process is broken for cygwin
-           AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
-           AC_SUBST(CURL_DISABLE_LDAP, [1])
-           AC_MSG_RESULT(no)
-           ;;
   *)
        AC_MSG_RESULT(yes)
-       esac
        ;;
   esac ],[
-       case $host in
-         *-*-cygwin*)
-           # Force no ldap. config/build process is broken for cygwin
-           AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
-           AC_SUBST(CURL_DISABLE_LDAP, [1])
-           AC_MSG_RESULT(no)
-           ;;
-         *)
-           AC_MSG_RESULT(yes)
-       esac ]
+       AC_MSG_RESULT(yes) ]
 )
 AC_MSG_CHECKING([whether to support ldaps])
 AC_ARG_ENABLE(ldaps,
@@ -403,20 +408,26 @@ AC_HELP_STRING([--disable-ldaps],[Disable LDAPS support]),
        AC_DEFINE(CURL_DISABLE_LDAPS, 1, [to disable LDAPS])
        AC_SUBST(CURL_DISABLE_LDAPS, [1])
        ;;
-  *)   if test x$CURL_DISABLE_LDAP = x1 ; then
-               AC_MSG_RESULT(LDAP support needs to be enabled in order to enable LDAPS support!)
+  *)   if test "x$CURL_DISABLE_LDAP" = "x1" ; then
+         AC_MSG_RESULT(LDAP needs to be enabled to support LDAPS)
          AC_DEFINE(CURL_DISABLE_LDAPS, 1, [to disable LDAPS])
          AC_SUBST(CURL_DISABLE_LDAPS, [1])
        else
          AC_MSG_RESULT(yes)
          AC_DEFINE(HAVE_LDAP_SSL, 1, [Use LDAPS implementation])
-               curl_ldaps_msg="enabled"
+         AC_SUBST(HAVE_LDAP_SSL, [1])
        fi
        ;;
-  esac ],
+  esac ],[
+       if test "x$CURL_DISABLE_LDAP" = "x1" ; then
          AC_MSG_RESULT(no)
          AC_DEFINE(CURL_DISABLE_LDAPS, 1, [to disable LDAPS])
          AC_SUBST(CURL_DISABLE_LDAPS, [1])
+       else
+         AC_MSG_RESULT(yes)
+         AC_DEFINE(HAVE_LDAP_SSL, 1, [Use LDAPS implementation])
+         AC_SUBST(HAVE_LDAP_SSL, [1])
+       fi ]
 )
 
 AC_MSG_CHECKING([whether to support rtsp])
@@ -557,6 +568,22 @@ AC_HELP_STRING([--disable-smtp],[Disable SMTP support]),
        AC_MSG_RESULT(yes)
 )
 
+AC_MSG_CHECKING([whether to support gopher])
+AC_ARG_ENABLE(gopher,
+AC_HELP_STRING([--enable-gopher],[Enable Gopher support])
+AC_HELP_STRING([--disable-gopher],[Disable Gopher support]),
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_GOPHER, 1, [to disable Gopher])
+       AC_SUBST(CURL_DISABLE_GOPHER, [1])
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+
 
 dnl **********************************************************************
 dnl Check for built-in manual
@@ -751,6 +778,8 @@ ac_cv_func_strcasecmp="no"
 
 CURL_CHECK_LIBS_CONNECT
 
+CURL_NETWORK_LIBS=$LIBS
+
 dnl **********************************************************************
 dnl In case that function clock_gettime with monotonic timer is available,
 dnl check for additional required libraries.
@@ -801,13 +830,11 @@ if test x$CURL_DISABLE_LDAP != x1 ; then
   CURL_CHECK_HEADER_LDAP_SSL
 
   if test -z "$LDAPLIBNAME" ; then
-    case $host in
-      *-*-cygwin* | *-*-mingw* | *-*-pw32*)
-        dnl Windows uses a single and unique OpenLDAP DLL name
+    if test "$ac_cv_native_windows" = "yes"; then
+      dnl Windows uses a single and unique LDAP library name
       LDAPLIBNAME="wldap32"
       LBERLIBNAME="no"
-        ;;
-    esac
+    fi
   fi
 
   if test "$LDAPLIBNAME" ; then
@@ -849,19 +876,22 @@ if test x$CURL_DISABLE_LDAP != x1 ; then
 fi
 
 if test x$CURL_DISABLE_LDAP != x1 ; then
-  AC_CHECK_FUNCS([ldap_url_parse])
+  AC_CHECK_FUNCS([ldap_url_parse ldap_init_fd])
 
   if test "$LDAPLIBNAME" = "wldap32"; then
     curl_ldap_msg="enabled (winldap)"
-    AC_DEFINE(CURL_LDAP_WIN, 1, [Use W$ LDAP implementation])
-    case $host in
-      *-*-cygwin* | *-*-pw32*)
-        AC_DEFINE(CURL_LDAP_HYBRID, 1, [W$ LDAP with non-W$ compiler])
-        ;;
-    esac
+    AC_DEFINE(CURL_LDAP_WIN, 1, [Use Windows LDAP implementation])
   else
     curl_ldap_msg="enabled (OpenLDAP)"
+    if test "x$ac_cv_func_ldap_init_fd" = "xyes"; then
+      AC_DEFINE(USE_OPENLDAP, 1, [Use OpenLDAP-specific code])
+      AC_SUBST(USE_OPENLDAP, [1])
     fi
+  fi
+fi
+
+if test x$CURL_DISABLE_LDAPS != x1 ; then
+    curl_ldaps_msg="enabled"
 fi
 
 dnl **********************************************************************
@@ -1137,10 +1167,17 @@ if test x"$want_gss" = xyes; then
     ],
     [
       dnl not found, check Heimdal or MIT
+      AC_CHECK_HEADERS([gssapi/gssapi.h], [], [not_mit=1])
       AC_CHECK_HEADERS(
-        [gssapi/gssapi.h gssapi/gssapi_generic.h gssapi/gssapi_krb5.h],
+        [gssapi/gssapi_generic.h gssapi/gssapi_krb5.h],
         [],
-        [not_mit=1])
+        [not_mit=1],
+        [
+AC_INCLUDES_DEFAULT
+#ifdef HAVE_GSSAPI_GSSAPI_H
+#include <gssapi/gssapi.h>
+#endif
+        ])
       if test "x$not_mit" = "x1"; then
         dnl MIT not found, check for Heimdal
         AC_CHECK_HEADER(gssapi.h,
@@ -1699,6 +1736,104 @@ if test "$OPENSSL_ENABLED" != "1"; then
 
 fi dnl OPENSSL != 1
 
+dnl ---
+dnl If GnuTLS is enabled, we MUST verify that it uses libgcrypt since
+dnl curl code relies on that but recent GnuTLS versions can in fact build
+dnl with different crypto libraries which curl right now cannot handle
+dnl ---
+
+if test "$GNUTLS_ENABLED" = "1"; then
+  AC_CHECK_LIB(gcrypt,
+               gcry_control, ,
+    [
+      AC_MSG_ERROR([need GnuTLS built with gcrypt to function with GnuTLS])
+    ])
+fi
+
+dnl ----------------------------------------------------
+dnl check for PolarSSL
+dnl ----------------------------------------------------
+
+dnl Default to compiler & linker defaults for PolarSSL files & libraries.
+OPT_POLARSSL=no
+
+_cppflags=$CPPFLAGS
+_ldflags=$LDFLAGS
+AC_ARG_WITH(polarssl,dnl
+AC_HELP_STRING([--with-polarssl=PATH],[where to look for PolarSSL, PATH points to the installation root (default: /usr/local/)])
+AC_HELP_STRING([--without-polarssl], [disable PolarSSL detection]),
+  OPT_POLARSSL=$withval)
+
+if test "$OPENSSL_ENABLED" != "1"; then
+
+  if test X"$OPT_POLARSSL" != Xno; then
+
+    if test "$OPT_POLARSSL" = "yes"; then
+      OPT_POLARSSL=""
+    fi
+
+    if test -z "$OPT_POLARSSL" ; then
+      dnl check for lib first without setting any new path
+
+      AC_CHECK_LIB(polarssl, havege_init,
+      dnl libpolarssl found, set the variable
+       [
+         AC_DEFINE(USE_POLARSSL, 1, [if PolarSSL is enabled])
+         AC_SUBST(USE_POLARSSL, [1])
+         POLARSSL_ENABLED=1
+         USE_POLARSSL="yes"
+         curl_ssl_msg="enabled (PolarSSL)"
+        ])
+    fi
+
+    if test "x$USE_POLARSSL" != "xyes"; then
+      dnl add the path and test again
+      addld=-L$OPT_POLARSSL/lib$libsuff
+      addcflags=-I$OPT_POLARSSL/include
+      polarssllib=$OPT_POLARSSL/lib$libsuff
+
+      LDFLAGS="$LDFLAGS $addld"
+      if test "$addcflags" != "-I/usr/include"; then
+         CPPFLAGS="$CPPFLAGS $addcflags"
+      fi
+
+      AC_CHECK_LIB(polarssl, ssl_init,
+       [
+       AC_DEFINE(USE_POLARSSL, 1, [if PolarSSL is enabled])
+       AC_SUBST(USE_POLARSSL, [1])
+       POLARSSL_ENABLED=1
+       USE_POLARSSL="yes"
+       curl_ssl_msg="enabled (PolarSSL)"
+       ],
+       [
+         CPPFLAGS=$_cppflags
+         LDFLAGS=$_ldflags
+       ])
+    fi
+
+    if test "x$USE_POLARSSL" = "xyes"; then
+      AC_MSG_NOTICE([detected PolarSSL])
+
+      CURL_LIBS="$CURL_LIBS -lpolarssl"
+      LIBS="$LIBS -lpolarssl"
+
+      if test -n "$polarssllib"; then
+        dnl when shared libs were found in a path that the run-time
+        dnl linker doesn't search through, we need to add it to
+        dnl LD_LIBRARY_PATH to prevent further configure tests to fail
+        dnl due to this
+
+        LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$polarssllib"
+        export LD_LIBRARY_PATH
+        AC_MSG_NOTICE([Added $polarssllib to LD_LIBRARY_PATH])
+      fi
+
+    fi
+
+  fi dnl PolarSSL not disabled
+
+fi dnl OPENSSL != 1
+
 dnl ----------------------------------------------------
 dnl NSS. Only check if GnuTLS and OpenSSL are not enabled
 dnl ----------------------------------------------------
@@ -1795,9 +1930,9 @@ if test "$OPENSSL_ENABLED" != "1" -a "$GNUTLS_ENABLED" != "1"; then
 
 fi dnl OPENSSL != 1 -a GNUTLS_ENABLED != 1
 
-if test "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED" = "x"; then
+if test "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED$POLARSSL_ENABLED" = "x"; then
   AC_MSG_WARN([SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more.])
-  AC_MSG_WARN([Use --with-ssl, --with-gnutls or --with-nss to address this.])
+  AC_MSG_WARN([Use --with-ssl, --with-gnutls, --with-polarssl or --with-nss to address this.])
 else
   # SSL is enabled, genericly
   AC_SUBST(SSL_ENABLED)
@@ -1882,7 +2017,10 @@ if test X"$OPT_LIBSSH2" != Xno; then
        dnl to prevent further configure tests to fail due to this
 
        dnl libssh2_version is a post 1.0 addition
-       AC_CHECK_FUNCS( libssh2_version )
+       dnl libssh2_init and libssh2_exit were added in 1.2.5
+       dnl libssh2_scp_send64 was added in 1.2.6
+       AC_CHECK_FUNCS( libssh2_version libssh2_init libssh2_exit \
+                       libssh2_scp_send64 )
 
        LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$DIR_SSH2"
        export LD_LIBRARY_PATH
@@ -1896,6 +2034,80 @@ if test X"$OPT_LIBSSH2" != Xno; then
   fi
 fi
 
+dnl **********************************************************************
+dnl Check for the presence of LIBRTMP libraries and headers
+dnl **********************************************************************
+
+dnl Default to compiler & linker defaults for LIBRTMP files & libraries.
+OPT_LIBRTMP=off
+AC_ARG_WITH(librtmp,dnl
+AC_HELP_STRING([--with-librtmp=PATH],[Where to look for librtmp, PATH points to the LIBRTMP installation (default: /usr/local/lib); when possible, set the PKG_CONFIG_PATH environment variable instead of using this option])
+AC_HELP_STRING([--without-librtmp], [disable LIBRTMP]),
+  OPT_LIBRTMP=$withval)
+
+if test X"$OPT_LIBRTMP" != Xno; then
+  dnl backup the pre-librtmp variables
+  CLEANLDFLAGS="$LDFLAGS"
+  CLEANCPPFLAGS="$CPPFLAGS"
+  CLEANLIBS="$LIBS"
+
+  case "$OPT_LIBRTMP" in
+  yes)
+    dnl --with-librtmp (without path) used
+    CURL_CHECK_PKGCONFIG(librtmp)
+
+    if test "$PKGCONFIG" != "no" ; then
+      LIB_RTMP=`$PKGCONFIG --libs-only-l librtmp`
+      LD_RTMP=`$PKGCONFIG --libs-only-L librtmp`
+      CPP_RTMP=`$PKGCONFIG --cflags-only-I librtmp`
+      version=`$PKGCONFIG --modversion librtmp`
+      DIR_RTMP=`echo $LD_RTMP | $SED -e 's/-L//'`
+    fi
+
+    ;;
+  off)
+    dnl no --with-librtmp option given, just check default places
+    LIB_RTMP="-lrtmp"
+    ;;
+  *)
+    dnl use the given --with-librtmp spot
+    PREFIX_RTMP=$OPT_LIBRTMP
+    ;;
+  esac
+
+  dnl if given with a prefix, we set -L and -I based on that
+  if test -n "$PREFIX_RTMP"; then
+    LD_RTMP=-L${PREFIX_RTMP}/lib$libsuff
+    CPP_RTMP=-I${PREFIX_RTMP}/include
+    DIR_RTMP=${PREFIX_RTMP}/lib$libsuff
+  fi
+
+  LDFLAGS="$LDFLAGS $LD_RTMP"
+  CPPFLAGS="$CPPFLAGS $CPP_RTMP"
+  LIBS="$LIBS $LIB_RTMP"
+
+  AC_CHECK_LIB(rtmp, RTMP_Init,
+    [
+     AC_CHECK_HEADERS(librtmp/rtmp.h,
+        curl_rtmp_msg="enabled (librtmp)"
+        LIBRTMP_ENABLED=1
+        AC_DEFINE(USE_LIBRTMP, 1, [if librtmp is in use])
+        AC_SUBST(USE_LIBRTMP, [1])
+     )
+    ],
+      dnl not found, revert back to clean variables
+      LDFLAGS=$CLEANLDFLAGS
+      CPPFLAGS=$CLEANCPPFLAGS
+      LIBS=$CLEANLIBS
+  )
+
+  if test X"$OPT_LIBRTMP" != Xoff &&
+     test "$LIBRTMP_ENABLED" != "1"; then
+    AC_MSG_ERROR([librtmp libs and/or directories were not found where specified!])
+  fi
+
+fi
+
 dnl **********************************************************************
 dnl Check for the presence of IDN libraries and headers
 dnl **********************************************************************
@@ -2282,6 +2494,35 @@ AM_CONDITIONAL(USE_MANUAL, test x"$USE_MANUAL" = x1)
 CURL_CHECK_LIB_ARES
 AM_CONDITIONAL(USE_EMBEDDED_ARES, test x$embedded_ares = xyes)
 
+if test "x$enable_shared" = "xyes"; then
+  build_libhostname=yes
+else
+  build_libhostname=no
+fi
+AM_CONDITIONAL(BUILD_LIBHOSTNAME, test x$build_libhostname = xyes)
+
+CURL_CHECK_OPTION_THREADED_RESOLVER
+
+if test "x$want_thres" = xyes && test "x$want_ares" = xyes; then
+  AC_MSG_ERROR(
+[Options --enable-threaded-resolver and --enable-ares are mutually exclusive])
+fi
+
+if test "$want_thres" = "yes"; then
+  AC_CHECK_HEADER(pthread.h,
+    [ AC_DEFINE(HAVE_PTHREAD_H, 1, [if you have <pthread.h>])
+      save_CFLAGS="$CFLAGS"
+      CFLAGS="$CFLAGS -pthread"
+      AC_CHECK_LIB(pthread, pthread_create,
+        [ AC_MSG_NOTICE([using POSIX threaded DNS lookup])
+          AC_DEFINE(USE_THREADS_POSIX, 1, [if you want POSIX threaded DNS lookup])
+          USE_THREADS_POSIX=1
+          curl_res_msg="threaded"
+        ],
+        [ CFLAGS="$save_CFLAGS"])
+  ])
+fi
+
 dnl ************************************************************
 dnl disable verbose text strings
 dnl
@@ -2452,10 +2693,15 @@ LIBCURL_LIBS=$LIBS
 AC_SUBST(LIBCURL_LIBS)
 AC_SUBST(CURL_LIBS)
 AC_SUBST(TEST_SERVER_LIBS)
+AC_SUBST(CURL_NETWORK_LIBS)
 LIBS=$ALL_LIBS  dnl LIBS is a magic variable that's used for every link
 
 AM_CONDITIONAL(CROSSCOMPILING, test x$cross_compiling = xyes)
 
+dnl yes or no
+ENABLE_SHARED="$enable_shared"
+AC_SUBST(ENABLE_SHARED)
+
 dnl
 dnl For keeping supported features and protocols also in pkg-config file
 dnl since it is more cross-compile frient than curl-config
@@ -2475,7 +2721,7 @@ fi
 if test "x$HAVE_LIBZ" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES libz"
 fi
-if test "x$USE_ARES" = "x1"; then
+if test "x$USE_ARES" = "x1" -o "x$USE_THREADS_POSIX" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES AsynchDNS"
 fi
 if test "x$IDN_ENABLED" = "x1"; then
@@ -2484,7 +2730,8 @@ fi
 if test "x$USE_WINDOWS_SSPI" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES SSPI"
 fi
-if test "x$USE_SSLEAY" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" -o "x$GNUTLS_ENABLED" = "x1"; then
+if test "x$USE_SSLEAY" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" \
+    -o "x$GNUTLS_ENABLED" = "x1" -o "x$NSS_ENABLED" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES NTLM"
 fi
 
@@ -2511,9 +2758,12 @@ if test "x$CURL_DISABLE_TELNET" != "x1"; then
 fi
 if test "x$CURL_DISABLE_LDAP" != "x1"; then
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS LDAP"
-fi
-if test "x$CURL_DISABLE_LDAPS" != "x1"; then
+  if test "x$CURL_DISABLE_LDAPS" != "x1"; then
+    if (test "x$USE_OPENLDAP" = "x1" && test "x$SSL_ENABLED" = "x1") ||
+      (test "x$USE_OPENLDAP" != "x1"  && test "x$HAVE_LDAP_SSL" = "x1"); then
       SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS LDAPS"
+    fi
+  fi
 fi
 if test "x$CURL_DISABLE_DICT" != "x1"; then
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS DICT"
@@ -2521,6 +2771,9 @@ fi
 if test "x$CURL_DISABLE_TFTP" != "x1"; then
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS TFTP"
 fi
+if test "x$CURL_DISABLE_GOPHER" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS GOPHER"
+fi
 if test "x$CURL_DISABLE_POP3" != "x1"; then
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS POP3"
   if test "x$SSL_ENABLED" = "x1"; then
@@ -2546,6 +2799,9 @@ fi
 if test "x$CURL_DISABLE_RTSP" != "x1"; then
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS RTSP"
 fi
+if test "x$USE_LIBRTMP" = "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS RTMP"
+fi
 
 dnl replace spaces with newlines
 dnl sort the lines
@@ -2565,6 +2821,7 @@ squeeze LIBS
 squeeze CURL_LIBS
 squeeze LIBCURL_LIBS
 squeeze TEST_SERVER_LIBS
+squeeze CURL_NETWORK_LIBS
 
 squeeze SUPPORT_FEATURES
 squeeze SUPPORT_PROTOCOLS
@@ -2617,7 +2874,7 @@ AC_MSG_NOTICE([Configured to build curl/libcurl:
   krb4 support:    ${curl_krb4_msg}
   GSSAPI support:  ${curl_gss_msg}
   SPNEGO support:  ${curl_spnego_msg}
-  c-ares support:  ${curl_ares_msg}
+  resolver:        ${curl_res_msg}
   ipv6 support:    ${curl_ipv6_msg}
   IDN support:     ${curl_idn_msg}
   Build libcurl:   Shared=${enable_shared}, Static=${enable_static}
@@ -2629,6 +2886,7 @@ AC_MSG_NOTICE([Configured to build curl/libcurl:
   LDAP support:    ${curl_ldap_msg}
   LDAPS support:   ${curl_ldaps_msg}
   RTSP support:    ${curl_rtsp_msg}
+  RTMP support:    ${curl_rtmp_msg}
   Protocols:       ${SUPPORT_PROTOCOLS}
 ])
 

curl-config.in

@@ -6,7 +6,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 2001 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 2001 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -32,6 +32,7 @@ Usage: curl-config [OPTION]
 
 Available values for OPTION include:
 
+  --built-shared says 'yes' if libcurl was built shared
   --ca        ca bundle install path
   --cc        compiler
   --cflags    pre-processor and compiler flags
@@ -64,6 +65,10 @@ while test $# -gt 0; do
     esac
 
     case "$1" in
+    --built-shared)
+        echo @ENABLE_SHARED@
+        ;;
+
     --ca)
 	echo "@CURL_CA_BUNDLE@"
 	;;
@@ -87,6 +92,7 @@ while test $# -gt 0; do
             echo "$protocol"
         done
 	;;
+
     --version)
 	echo libcurl @VERSION@
 	exit 0

docs/.gitignore

@@ -0,0 +1,2 @@
+*.html
+*.pdf

docs/CONTRIBUTE

@@ -29,9 +29,11 @@
  2.11 Test Cases
 
  3. Pushing Out Your Changes
+ 3.1 Write Access to git Repository
  3.2 How To Make a Patch with git
  3.3 How To Make a Patch without git
  3.4 How to get your changes into the main sources
+ 3.5 Write good commit messages
 
 ==============================================================================
 
@@ -114,7 +116,7 @@
 
 2.4 Line Lengths
 
- We try to keep source lines shorter than 80 columns.
+ We write source lines shorter than 80 columns.
 
 2.5 General Style
 
@@ -197,7 +199,8 @@
      git commit [file]
 
  As usual, group your commits so that you commit all changes that at once that
- constitutes a logical change.
+ constitutes a logical change. See also section "3.5 Write good commit
+ messages".
 
  Once you have done all your commits and you're happy with what you see, you
  can make patches out of your changes that are suitable for mailing:
@@ -255,3 +258,22 @@
  5. If you've followed the above mentioned paragraphs and your patch still
     hasn't been incorporated after some weeks, consider resubmitting it to the
     list.
+
+3.5 Write good commit messages
+
+  A short guide to how to do fine commit messages in the curl project.
+
+  ---- start ----
+  [area]: [short line describing the main effect]
+
+  [separate the above single line from the rest with an empty line]
+
+  [full description, no wider than 72 columns that describe as much as
+  possible as to why this change is made, and possibly what things
+  it fixes and everything else that is related]
+   ---- stop ----
+
+  Don't forget to use commit --author="" if you commit someone else's work,
+  and make sure that you have your own user and email setup correctly in git
+  before you commit
+

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: Nov 7, 2009 (http://curl.haxx.se/docs/faq.html)
+Updated: October 6, 2010 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _
                               ___| | | |  _ \| |
                              / __| | | | |_) | |
@@ -20,6 +20,8 @@ FAQ
   1.10 How many are using curl?
   1.11 Why don't you update ca-bundle.crt
   1.12 I have a problem who can I chat with?
+  1.13 curl's ECCN number?
+  1.14 How do I submit my patch?
 
  2. Install Related Problems
   2.1 configure doesn't find OpenSSL even when it is installed
@@ -48,6 +50,7 @@ FAQ
   3.16 What certificates do I need when I use SSL?
   3.17 How do I list the root dir of an FTP server?
   3.18 Can I use curl to send a POST/PUT and not wait for a response?
+  3.19 How do I get HTTP from a host using a specific IP address?
 
  4. Running Problems
   4.1 Problems connecting to SSL servers.
@@ -74,6 +77,7 @@ FAQ
   4.16 My HTTP POST or PUT requests are slow!
   4.17 Non-functional connect timeouts on Windows
   4.18 file:// URLs containing drive letters (Windows, NetWare)
+  4.19 Why doesn't cURL return an error when the network cable is unplugged?
 
  5. libcurl Issues
   5.1 Is libcurl thread-safe?
@@ -83,7 +87,7 @@ FAQ
   5.5 Does CURLOPT_WRITEDATA and CURLOPT_READDATA work on win32 ?
   5.6 What about Keep-Alive or persistent connections?
   5.7 Link errors when building libcurl on Windows!
-  5.8 libcurl.so.3: open failed: No such file or directory
+  5.8 libcurl.so.X: open failed: No such file or directory
   5.9 How does libcurl resolve host names?
   5.10 How do I prevent libcurl from writing the response to stdout?
   5.11 How do I make libcurl not receive the whole HTTP response?
@@ -122,8 +126,10 @@ FAQ
 
   libcurl
 
-    A free and easy-to-use client-side URL transfer library, supporting FTP,
-    FTPS, HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, FILE, LDAP and LDAPS.
+    A free and easy-to-use client-side URL transfer library, supporting DICT,
+    FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
+    POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
+
     libcurl supports HTTPS certificates, HTTP POST, HTTP PUT, FTP uploading,
     kerberos, HTTP form based upload, proxies, cookies, user+password
     authentication, file transfer resume, http proxy tunneling and more!
@@ -141,9 +147,8 @@ FAQ
 
     A command line tool for getting or sending files using URL syntax.
 
-    Since curl uses libcurl, it supports a range of common Internet protocols,
-    currently including HTTP, HTTPS, FTP, FTPS, SCP, SFTP, TFTP, LDAP, LDAPS,
-    DICT, TELNET and FILE.
+    Since curl uses libcurl, curl supports the same wide range of common
+    Internet protocols that libcurl does.
 
   We pronounce curl and cURL with an initial k sound: [kurl].
 
@@ -307,9 +312,9 @@ FAQ
   as used by numerous applications that include libcurl binaries in their
   distribution packages (like Adobe Acrobat Reader and Google Earth).
 
-  More than 90 known named companies use curl in commercial environments and
-  products. More than 100 known named open source projects depend on
-  (lib)curl.
+  More than a hundred known named companies use curl in commercial
+  environments and products and more than a hundred known named open source
+  projects depend on (lib)curl.
 
   In a poll on the curl web site mid-2005, more than 50% of the 300+ answers
   estimated a user base of one million users or more.
@@ -319,6 +324,12 @@ FAQ
   based web servers. A guess is that a fair amount of these Linux
   installations have curl installed.
 
+  The Debian project maintains statistics on packages installed by people
+  who have voluntarily run their package counting application.  In mid-2010,
+  libcurl3 was installed on over 55000 such systems (62% of reporting systems)
+  and was one of the 320 most popular installed packages (out of about 107000
+  possible packages).
+
   All this taken together, there is no doubt that there are millions of
   (lib)curl users.
 
@@ -327,6 +338,7 @@ FAQ
   http://curl.haxx.se/libcurl/using/apps.html
   http://counter.li.org/estimates.php
   http://news.netcraft.com/archives/2005/03/14/fedora_makes_rapid_progress.html
+  http://qa.debian.org/popcon.php?package=curl
 
   1.11 Why don't you update ca-bundle.crt
 
@@ -357,6 +369,41 @@ FAQ
   IRC network irc.freenode.net. If you're polite and nice, chances are big
   that you can get -- or provide -- help instantly.
 
+  1.13 curl's ECCN number?
+
+  The US government restricts exports of software that contains or uses
+  cryptography. When doing so, the Export Control Classification Number (ECCN)
+  is used to identify the level of export control etc.
+
+  ASF gives a good explanation at http://www.apache.org/dev/crypto.html
+
+  We believe curl's number might be ECCN 5D002, another possibility is
+  5D992. It seems necessary to write them, asking to confirm.
+
+  Comprehensible explanations of the meaning of such numbers and how to
+  obtain them (resp.) are here
+
+  http://www.bis.doc.gov/licensing/exportingbasics.htm
+  http://www.bis.doc.gov/licensing/do_i_needaneccn.html
+
+  An incomprehensible description of the two numbers above is here
+  http://www.access.gpo.gov/bis/ear/pdf/ccl5-pt2.pdf
+
+  1.14 How do I submit my patch?
+
+  When you have made a patch or a change of whatever sort, and want to submit
+  that to the project, there are a few different ways we prefer:
+
+  o send a patch to the curl-library mailing list. We're many subscribers
+    there and there are lots of people who can review patches, comment on them
+    and "receive" them properly.
+
+  o if your patch changes or fixes a bug, you can also opt to submit a bug
+    report in the bug tracker and attach your patch there. There are less
+    people involved there.
+
+  Lots of more details are found in the CONTRIBUTE and INTERNALS docs.
+
 
 2. Install Related Problems
 
@@ -399,10 +446,10 @@ FAQ
 
   2.2 Does curl work/build with other SSL libraries?
 
-  Curl has been written to use OpenSSL, GnuTLS, yassl or NSS, although there
-  should not be many problems using a different library. If anyone does "port"
-  curl to use a different SSL library, we are of course very interested in
-  getting the patch!
+  Curl has been written to use OpenSSL, GnuTLS, yassl, NSS or PolarSSL,
+  although there should not be many problems using a different library. If
+  anyone does "port" curl to use a different SSL library, we are of course
+  very interested in getting the patch!
 
   2.3 Where can I find a copy of LIBEAY32.DLL?
 
@@ -614,6 +661,9 @@ FAQ
     provide this in order to prove that you actually are who you claim to be.
     If the server doesn't require this, you don't need a client certificate.
 
+    A client certificate is always used together with a private key, and the
+    private key has a pass phrase that protects it.
+
   - Server certificate. The server you communicate with has a server
     certificate. You can and should verify this certificate to make sure that
     you are truly talking to the real server and not a server impersonating
@@ -621,8 +671,9 @@ FAQ
 
   - Certificate Authority certificate ("CA cert"). You often have several CA
     certs in a CA cert bundle that can be used to verify a server certificate
-    that was signed by one of the authorities in the bundle. curl comes with a
-    default CA cert bundle. You can override the default.
+    that was signed by one of the authorities in the bundle. curl does not
+    come with a CA cert bundle but most curl installs provide one. You can
+    also override the default.
 
     The server certificate verification process is made by using a Certificate
     Authority certificate ("CA cert") that was used to sign the server
@@ -653,6 +704,17 @@ FAQ
 
   But you could easily write your own program using libcurl to do such stunts.
 
+  3.19 How do I get HTTP from a host using a specific IP address?
+
+  For example, you may be trying out a web site installation that isn't yet in
+  the DNS. Or you have a site using multiple IP addresses for a given host
+  name and you want to address a specific one out of the set.
+
+  Set a custom Host: header that identifies the server name you want to reach
+  but use the target IP address in the URL:
+
+    curl --header "Host: www.example.com" http://127.0.0.1/
+
 
 4. Running Problems
 
@@ -801,10 +863,8 @@ FAQ
 
   4.9 Curl can't authenticate to the server that requires NTLM?
 
-  This is supported in curl 7.10.6 or later. No earlier curl version knows
-  of this magic. Later versions require the OpenSSL, GnuTLS or Microsoft
-  Windows libraries to provide this functionality. Using the NSS library
-  will not provide NTLM authentication functionality in curl.
+  NTLM support requires OpenSSL, GnuTLS, NSS or Microsoft Windows libraries at
+  build-time to provide this functionality.
 
   NTLM is a Microsoft proprietary protocol. Proprietary formats are evil. You
   should not use such ones.
@@ -944,6 +1004,31 @@ FAQ
 
   In either case, cURL should now be looking for the correct file.
 
+  4.19 Why doesn't cURL return an error when the network cable is unplugged?
+
+  Unplugging the cable is not an error situation. The TCP/IP protocol stack
+  was designed to be fault tolerant, so even though there may be a physical
+  break somewhere the connection shouldn't be affected, just possibly
+  delayed.  Eventually, the physical break will be fixed or the data will be
+  re-routed around the physical problem.
+
+  In such cases, the TCP/IP stack is responsible for detecting when the
+  network connection is irrevocably lost. Since with some protocols it is
+  perfectly legal for the client wait indefinitely for data, the stack may
+  never report a problem, and even when it does, it can take up to 20 minutes
+  for it to detect an issue.  The curl option --keepalive-time enables
+  keep-alive support in the TCP/IP stack which makes it periodically probe the
+  connection to make sure it is still available to send data. That should
+  reliably detect any TCP/IP network failure.
+
+  But even that won't detect the network going down before the TCP/IP
+  connection is established (e.g. during a DNS lookup) or using protocols that
+  don't use TCP.  To handle those situations, curl offers a number of timeouts
+  on its own. --speed-limit/--speed-time will abort if the data transfer rate
+  falls too low, and --connect-timeout and --max-time can be used to put an
+  overall timeout on the connection phase or the entire transfer.
+
+
 5. libcurl Issues
 
   5.1 Is libcurl thread-safe?
@@ -1044,11 +1129,14 @@ FAQ
 
   When building an application that uses the static libcurl library, you must
   add -DCURL_STATICLIB to your CFLAGS. Otherwise the linker will look for
-  dynamic import symbols. If you get linker error like "unknown symbol
-  __imp__curl_easy_init ..." you have linked against the wrong (static)
-  library.  If you want to use the libcurl.dll and import lib, you don't need
-  any extra CFLAGS, but use one of the import libraries below. These are the
-  libraries produced by the various lib/Makefile.* files:
+  dynamic import symbols. If you're using Visual Studio, you need to instead
+  add CURL_STATICLIB in the "Preprocessor Definitions" section.
+
+  If you get linker error like "unknown symbol __imp__curl_easy_init ..." you
+  have linked against the wrong (static) library.  If you want to use the
+  libcurl.dll and import lib, you don't need any extra CFLAGS, but use one of
+  the import libraries below. These are the libraries produced by the various
+  lib/Makefile.* files:
 
   Target:          static lib.   import lib for libcurl*.dll.
   -----------------------------------------------------------
@@ -1058,13 +1146,14 @@ FAQ
   Borland:         libcurl.lib   libcurl_imp.lib
 
 
-  5.8 libcurl.so.3: open failed: No such file or directory
+  5.8 libcurl.so.X: open failed: No such file or directory
 
   This is an error message you might get when you try to run a program linked
   with a shared version of libcurl and your run-time linker (ld.so) couldn't
-  find the shared library named libcurl.so.3.
+  find the shared library named libcurl.so.X. (Where X is the number of the
+  current libcurl ABI, typically 3 or 4).
 
-  You need to make sure that ld.so finds libcurl.so.3. You can do that
+  You need to make sure that ld.so finds libcurl.so.X. You can do that
   multiple ways, and it differs somewhat between different operating systems,
   but they are usually:
 
@@ -1100,10 +1189,10 @@ FAQ
     Using this offers asynchronous name resolves but it currently has no IPv6
     support.
 
-  - The Windows threaded resolver. It use:
+  - The threaded resolver (default option on Windows). It uses:
 
-    A - gethostbyname() on plain ipv4 windows hosts
-    B - getaddrinfo() on ipv6-enabled windows hosts
+    A - gethostbyname() on plain ipv4 hosts
+    B - getaddrinfo() on ipv6-enabled hosts
 
   Also note that libcurl never resolves or reverse-lookups addresses given as
   pure numbers, such as 127.0.0.1 or ::1.
@@ -1182,7 +1271,9 @@ FAQ
   to do "LIST -a" or similar to see them.
 
   The application thus needs to parse the LIST output. One such existing
-  list parser is available at http://cr.yp.to/ftpparse.html
+  list parser is available at http://cr.yp.to/ftpparse.html  Versions of
+  libcurl since 7.21.0 also provide the ability to specify a wildcard to
+  download multiple files from one FTP directory.
 
 
 6. License Issues

docs/FEATURES

@@ -43,7 +43,7 @@ HTTP
  - POST
  - Pipelining
  - multipart formpost (RFC1867-style)
- - authentication: Basic, Digest, NTLM(*1), GSS-Negotiate/Negotiate(*3) and
+ - authentication: Basic, Digest, NTLM(*9), GSS-Negotiate/Negotiate(*3) and
    SPNEGO (*4) to server and proxy
  - resume (both GET and PUT)
  - follow redirects
@@ -125,7 +125,7 @@ FILE
 FOOTNOTES
 =========
 
-  *1 = requires OpenSSL, GnuTLS, NSS or yassl
+  *1 = requires OpenSSL, GnuTLS, NSS, yassl or PolarSSL
   *2 = requires OpenLDAP
   *3 = requires a GSSAPI-compliant library, such as Heimdal or similar.
   *4 = requires FBopenssl
@@ -133,3 +133,4 @@ FOOTNOTES
   *6 = requires c-ares
   *7 = requires OpenSSL or NSS, as GnuTLS only supports SSLv3 and TLSv1
   *8 = requires libssh2
+  *9 = requires OpenSSL, GnuTLS, NSS or yassl

docs/HISTORY

@@ -157,6 +157,20 @@ September 2005:
 
  More than 100,000 unique visitors of the curl web site. 25 mirrors.
 
+December 2005:
+
+ security vulnerability: libcurl URL Buffer Overflow
+
+January 2006:
+
+ We dropped support for Gopher. We found bugs in the implementation that
+ turned out having been introduced years ago, so with the conclusion that
+ nobody had found out in all this time we removed it instead of fixing it.
+
+March 2006:
+
+ security vulnerability: libcurl TFTP Packet Buffer Overflow
+
 April 2006:
 
  Added the multi_socket() API
@@ -174,6 +188,10 @@ February 2007:
 
  Added support for the Mozilla NSS library to do the SSL/TLS stuff
 
+July 2007:
+
+ security vulnerability: libcurl GnuTLS insufficient cert verification
+
 November 2008:
 
  Command line options:         128
@@ -184,3 +202,43 @@ November 2008:
 
  145,000 unique visitors. >100 GB downloaded.
 
+March 2009:
+
+ security vulnerability: libcurl Arbitrary File Access
+
+August 2009:
+
+ security vulnerability: libcurl embedded zero in cert name
+
+December 2009:
+
+ Added support for IMAP, POP3 and SMTP
+
+January 2010:
+
+ Added support for RTSP
+
+February 2010:
+
+ security vulnerability: libcurl data callback excessive length
+
+March 2010:
+
+ The project switched over to use git instead of CVS for source code control
+
+May 2010:
+
+ Added support for RTMP
+
+ Added support for PolarSSL to do the SSL/TLS stuff
+
+August 2010:
+
+ Public curl releases:         117
+ Command line options:         138
+ curl_easy_setopt() options:   180
+ Public functions in libcurl:  58
+ Known libcurl bindings:       39
+ Contributors:                 808
+
+ Gopher support added (re-added actually)

docs/INSTALL

@@ -139,6 +139,9 @@ UNIX
      To build with NSS support instead of OpenSSL for SSL/TLS, note that
      you need to use both --without-ssl and --with-nss.
 
+     To build with PolarSSL support instead of OpenSSL for SSL/TLS, note that
+     you need to use both --without-ssl and --with-polarssl.
+
      To get GSSAPI support, build with --with-gssapi and have the MIT or
      Heimdal Kerberos 5 packages installed.
 
@@ -779,6 +782,11 @@ VxWorks
    To clean the build results type 'make -f ./Makefile.vxworks clean'.
 
 
+Android
+=======
+   See the build notes in the Android.mk file.
+
+
 CROSS COMPILE
 =============
    (This section was graciously brought to us by Jim Duey, with additions by
@@ -908,7 +916,7 @@ PORTS
         - Alpha OpenVMS V7.1-1H2
         - Alpha Tru64 v5.0 5.1
         - AVR32 Linux
-        - ARM Android 1.5
+        - ARM Android 1.5, 2.1
         - ARM INTEGRITY
         - ARM iPhone OS
         - Cell Linux
@@ -972,10 +980,17 @@ PORTS
 Useful URLs
 ===========
 
-OpenSSL   http://www.openssl.org
-MingW     http://www.mingw.org
-OpenLDAP  http://www.openldap.org
-Zlib      http://www.gzip.org/zlib/
+c-ares    http://daniel.haxx.se/projects/c-ares/license.html
+GNU GSS   http://www.gnu.org/software/gss/
+GnuTLS    http://www.gnu.org/software/gnutls/
+Heimdal   http://www.pdc.kth.se/heimdal/
+libidn    http://www.gnu.org/software/libidn/
 libssh2   http://www.libssh2.org
-
-
+MingW     http://www.mingw.org
+MIT Kerberos http://web.mit.edu/kerberos/www/dist/
+NSS       http://www.mozilla.org/projects/security/pki/nss/
+OpenLDAP  http://www.openldap.org
+OpenSSL   http://www.openssl.org
+PolarSSL  http://polarssl.org
+yassl     http://www.yassl.com/
+Zlib      http://www.gzip.org/zlib/

docs/INTERNALS

@@ -37,7 +37,7 @@ Portability
  GnuTLS       1.2
  zlib         1.1.4
  libssh2      0.16
- c-ares       1.5.0
+ c-ares       1.6.0
  libidn       0.4.1
  *yassl       1.4.0 (http://curl.haxx.se/mail/lib-2008-02/0093.html)
  openldap     2.0
@@ -356,7 +356,7 @@ multi interface/non-blocking
 
  The FTP and the SFTP/SCP protocols are thus perfect examples of how we adapt
  and adjust the code to allow non-blocking operations even on multi-stage
- protocols. The DICT, TELNET and TFTP are crappy examples and they are subject
+ protocols. The DICT, LDAP and TELNET are crappy examples and they are subject
  for rewrite in the future to better fit the libcurl protocol family.
 
 SSL libraries

docs/KNOWN_BUGS

@@ -3,6 +3,11 @@ join in and help us correct one or more of these! Also be sure to check the
 changelog of the current development status, as one or more of these problems
 may have been fixed since this was written!
 
+76. The SOCKET type in Win64 is 64 bits large (and thus so is curl_socket_t on
+  that platform), and long is only 32 bits. It makes it impossible for
+  curl_easy_getinfo() to return a socket properly with the CURLINFO_LASTSOCKET
+  option as for all other operating systems.
+
 75. NTLM authentication involving unicode user name or password.
   http://curl.haxx.se/mail/lib-2009-10/0024.html
   http://curl.haxx.se/bug/view.cgi?id=2944325
@@ -49,11 +54,6 @@ may have been fixed since this was written!
   handle with curl_easy_cleanup() and create a new. Some more details:
   http://curl.haxx.se/mail/lib-2009-04/0300.html
 
-62. CURLOPT_TIMEOUT does not work properly with the regular multi and
-  multi_socket interfaces. The work-around for apps is to simply remove the
-  easy handle once the time is up. See also:
-  http://curl.haxx.se/bug/view.cgi?id=2501457
-
 61. If an upload using Expect: 100-continue receives an HTTP 417 response,
   it ought to be automatically resent without the Expect:.  A workaround is
   for the client application to redo the transfer after disabling Expect:.
@@ -63,10 +63,6 @@ may have been fixed since this was written!
   is waiting for the the 100-continue response.
   http://curl.haxx.se/mail/lib-2008-08/0462.html
 
-59. If the CURLOPT_PORT option is used on an FTP URL like
-  "ftp://example.com/file;type=A" using a proxy, the ";type=A" is stripped off.
-  See the comment in parse_remote_port()
-
 58. It seems sensible to be able to use CURLOPT_NOBODY and
   CURLOPT_FAILONERROR with FTP to detect if a file exists or not, but it is
   not working: http://curl.haxx.se/mail/lib-2008-07/0295.html
@@ -91,7 +87,7 @@ may have been fixed since this was written!
 
 52. Gautam Kachroo's issue that identifies a problem with the multi interface
   where a connection can be re-used without actually being properly
-  SSL-negoatiated:
+  SSL-negotiated:
   http://curl.haxx.se/mail/lib-2008-01/0277.html
 
 49. If using --retry and the transfer timeouts (possibly due to using -m or
@@ -141,12 +137,13 @@ may have been fixed since this was written!
 30. You need to use -g to the command line tool in order to use RFC2732-style
   IPv6 numerical addresses in URLs.
 
-29. IPv6 URLs with zone ID is not supported.
+29. IPv6 URLs with zone ID is not nicely supported.
   http://www.ietf.org/internet-drafts/draft-fenner-literal-zone-02.txt (expired)
   specifies the use of a plus sign instead of a percent when specifying zone
   IDs in URLs to get around the problem of percent signs being
   special. According to the reporter, Firefox deals with the URL _with_ a
   percent letter (which seems like a blatant URL spec violation).
+  libcurl supports zone IDs where the percent sign is URL-escaped (i.e. %25).
 
    See http://curl.haxx.se/bug/view.cgi?id=1371118
 
@@ -189,7 +186,7 @@ may have been fixed since this was written!
   would not meaningfully support NUL characters within RFC 959 <string>,
   anyway (e.g., UNIX pathnames may not contain NUL).
 
-14. Test case 165 might fail on system which has libidn present, but with an
+14. Test case 165 might fail on a system which has libidn present, but with an
   old iconv version (2.1.3 is a known bad version), since it doesn't recognize
   the charset when named ISO8859-1. Changing the name to ISO-8859-1 makes the
   test pass, but instead makes it fail on Solaris hosts that use its native

docs/RESOURCES

@@ -32,12 +32,16 @@ This document lists documents and standards used by curl.
 
   RFC 2068 - HTTP 1.1 (obsoleted by RFC 2616)
 
+  RFC 2104 - Keyed-Hashing for Message Authentication
+
   RFC 2109 - HTTP State Management Mechanism (cookie stuff)
            - Also, read Netscape's specification at
              http://curl.haxx.se/rfc/cookie_spec.html
 
   RFC 2183 - The Content-Disposition Header Field
 
+  RFC 2195 - CRAM-MD5 authentication
+
   RFC 2229 - A Dictionary Server Protocol
 
   RFC 2255 - Newer LDAP URL syntax document.
@@ -73,3 +77,7 @@ This document lists documents and standards used by curl.
   RFC 2965 - HTTP State Management Mechanism. Cookies. Obsoletes RFC2109
 
   RFC 3207 - SMTP over TLS
+
+  RFC 4616 - PLAIN authentication
+
+  RFC 4954 - SMTP Authentication

docs/THANKS

@@ -6,14 +6,17 @@
 
 Aaron Oneal
 Adam D. Moss
+Adam Light
 Adam Piggott
 Adrian Schuur
+Akos Pasztory
 Alan Pinstein
 Albert Chin-A-Young
 Albert Choy
 Ale Vesely
 Aleksandar Milivojevic
 Alessandro Vesely
+Alex Bligh
 Alex Fishman
 Alex Neblett
 Alex Suykov
@@ -41,6 +44,7 @@ Andreas Olsson
 Andreas Rieke
 Andreas Schuldei
 Andreas Wurf
+Andrei Benea
 Andres Garcia
 Andrew Benham
 Andrew Biggs
@@ -69,6 +73,7 @@ Axel Tillequin
 Balint Szilakszi
 Bart Whiteley
 Bas Mevissen
+Ben Darnell
 Ben Greear
 Ben Madsen
 Ben Van Hof
@@ -81,6 +86,7 @@ Bill Hoffman
 Bjorn Augustsson
 Bjorn Reese
 Bj<EFBFBD>rn Stenberg
+Bob Richmond
 Bob Schader
 Bogdan Nicula
 Brad Burdick
@@ -118,6 +124,7 @@ Christian Schmitz
 Christian Vogt
 Christophe Demory
 Christophe Legry
+Christopher Conroy
 Christopher Palow
 Christopher R. Palmer
 Ciprian Badescu
@@ -200,7 +207,9 @@ Dominick Meglio
 Doug Kaufman
 Doug Porter
 Douglas E. Wegscheid
+Douglas Kilpatrick
 Douglas R. Horner
+Douglas Steinwand
 Dov Murik
 Duane Cathey
 Duncan Mac-Vicar Prett
@@ -222,6 +231,7 @@ Eric Cooper
 Eric Landes
 Eric Lavigne
 Eric Melville
+Eric Mertens
 Eric Rautman
 Eric Thelin
 Eric Vergnaud
@@ -243,6 +253,7 @@ Forrest Cahoon
 Frank Hempel
 Frank Keeney
 Frank McGeough
+Frank Meier
 Frank Ticheler
 Fred Machado
 Fred New
@@ -291,9 +302,12 @@ Hans Steegers
 Hans-Jurgen May
 Hardeep Singh
 Harshal Pradhan
+Hauke Duden
 Heikki Korpela
 Henrik Storner
 Hidemoto Nakada
+Hoi-Ho Chan
+Howard Chu
 Hzhijun
 Ian Ford
 Ian Gulliver
@@ -310,8 +324,10 @@ Immanuel Gregoire
 Ingmar Runge
 Ingo Ralf Blum
 Ingo Wilken
+Jack Zhang
 Jacky Lam
 Jacob Meuser
+Jacob Moshenko
 Jad Chamcham
 James Bursa
 James Cheng
@@ -325,8 +341,10 @@ Jamie Lokier
 Jamie Newton
 Jamie Wilkinson
 Jan Kunder
+Jan Van Boghout
 Jared Lundell
 Jari Sundell
+Jason McDonald
 Jason S. Priebe
 Jay Austin
 Jayesh A Shah
@@ -345,6 +363,7 @@ Jeff Weber
 Jeffrey Pohlmeyer
 Jeremy Friesner
 Jerome Muffat-Meridol
+Jerome Vouillon
 Jes Badwal
 Jesper Jensen
 Jesse Noller
@@ -369,9 +388,11 @@ John Lightsey
 John McGowan
 John P. McCaskey
 John Wilkinson
+John-Mark Bell
 Johnny Luong
 Jon Grubbs
 Jon Nelson
+Jon Sargeant
 Jon Travis
 Jon Turner
 Jonas Forsman
@@ -396,6 +417,7 @@ J
 J<EFBFBD>rn Hartroth
 Kai Sommerfeld
 Kai-Uwe Rommel
+Kalle Vahlman
 Kamil Dudka
 Kang-Jin Lee
 Karl Moerder
@@ -408,6 +430,7 @@ Keith McGuigan
 Keith Mok
 Ken Hirsch
 Ken Rastatter
+Kenny To
 Kent Boortz
 Keshav Krity
 Kevin Baughman
@@ -471,24 +494,28 @@ Mark Eichin
 Mark Incley
 Mark Karpeles
 Mark Lentczner
+Markus Duft
 Markus Koetter
 Markus Moeller
 Markus Oberhumer
 Martijn Koster
 Martin C. Martin
 Martin Drasar
+Martin Hager
 Martin Hedenfalk
 Martin Skinner
 Martin Storsjo
 Marty Kuhrt
 Maruko
 Massimiliano Ziccardi
+Massimo Callegari
 Mateusz Loskot
 Mathias Axelsson
 Mats Lidell
 Matt Kraai
 Matt Veenstra
 Matt Witherspoon
+Matt Wixson
 Matthew Blain
 Matthew Clarke
 Maurice Barnum
@@ -512,11 +539,13 @@ Michal Bonino
 Michal Marek
 Michele Bini
 Mihai Ionescu
+Mikael Johansson
 Mikael Sennerholm
 Mike Bytnar
 Mike Crowe
 Mike Dobbs
 Mike Hommey
+Mike Power
 Mike Protts
 Mike Revi
 Miklos Nemeth
@@ -554,18 +583,21 @@ Olaf St
 Oren Tirosh
 P R Schaffner
 Pascal Terjan
+Pat Ray
 Patrick Bihan-Faou
 Patrick Monnerat
 Patrick Scott
 Patrick Smith
 Patrik Thunstrom
 Paul Harrington
+Paul Howarth
 Paul Marquis
 Paul Moore
 Paul Nolan
 Paul Querna
 Pavel Cenek
 Pavel Orehov
+Pavel Raiskup
 Pawel A. Gajda
 Pawel Kierski
 Pedro Neves
@@ -595,12 +627,14 @@ Philippe Raoult
 Philippe Vaucher
 Pierre
 Pierre Brico
+Pierre Joye
 Pooyan McSporran
 Pramod Sharma
 Puneet Pawaia
 Quagmire
 Rafa Muyo
 Rafael Sagula
+Rainer Canavan
 Rainer Koenig
 Ralf S. Engelschall
 Ralph Beckmann
@@ -638,6 +672,7 @@ Robert Foreman
 Robert Iakobashvili
 Robert Olson
 Robert Weaver
+Robin Cornelius
 Robin Johnson
 Robin Kay
 Robson Braga Araujo
@@ -651,6 +686,8 @@ Ron Zapp
 Rosimildo da Silva
 Roy Shan
 Rune Kleveland
+Ruslan Gazizov
+Ryan Chan
 Ryan Nelson
 S. Moonesamy
 Salvador D<>vila
@@ -676,6 +713,7 @@ Shard
 Shawn Poulson
 Shmulik Regev
 Siddhartha Prakash Jain
+Sidney San Martin
 Siegfried Gyuricsko
 Simon Dick
 Simon Josefsson
@@ -703,6 +741,7 @@ Steve Oliphant
 Steve Roskowski
 Steven Bazyl
 Steven G. Johnson
+Steven M. Schweda
 Stoned Elipot
 Sven Anders
 Sven Neuhaus
@@ -714,6 +753,7 @@ Tanguy Fautre
 Temprimus
 Thomas J. Moore
 Thomas Klausner
+Thomas Lopatic
 Thomas Schwinge
 Thomas Tonino
 Tim Ansell
@@ -727,6 +767,7 @@ Toby Peterson
 Todd Kulesza
 Todd Vierling
 Tom Benoist
+Tom Donovan
 Tom Lee
 Tom Mattison
 Tom Moers

docs/TODO

@@ -27,7 +27,7 @@
  3.1  More and better
 
  4. FTP
- 4.1 PRET
+ 4.1 HOST
  4.2 Alter passive/active on failure and retry
  4.3 Earlier bad letter detection
  4.4 REST for large files
@@ -55,33 +55,27 @@
  7.7 Support other SSL libraries
  7.8  Support SRP on the TLS layer
  7.9 improve configure --with-ssl
- 7.10 Make NTLM work with other crypto functions
 
  8. GnuTLS
  8.1 SSL engine stuff
  8.2 SRP
- 8.3 non-blocking
- 8.4 check connection
+ 8.3 check connection
+ 8.4 non-gcrypt
 
  9. Other protocols
- 9.1 ditch ldap-specific select
 
  10. New protocols
- 10.1 RTSP
- 10.2 RSYNC
- 10.3 RTMP
+ 10.1 RSYNC
 
  11. Client
- 11.1 Content-Disposition
- 11.2 sync
- 11.3 glob posts
- 11.4 prevent file overwriting
- 11.5 ftp wildcard download
- 11.6 simultaneous parallel transfers
- 11.7 provide formpost headers
- 11.8 url-specific options
- 11.9 metalink support
- 11.10 warning when setting an option
+ 11.1 sync
+ 11.2 glob posts
+ 11.3 prevent file overwriting
+ 11.4 simultaneous parallel transfers
+ 11.5 provide formpost headers
+ 11.6 url-specific options
+ 11.7 metalink support
+ 11.8 warning when setting an option
 
  12. Build
  12.1 roffit
@@ -148,7 +142,6 @@
  EWOULDBLOCK or similar. Blocking cases include:
 
  - Name resolves on non-windows unless c-ares is used
- - GnuTLS SSL connections
  - NSS SSL connections
  - Active FTP connections
  - HTTP proxy CONNECT operations
@@ -190,7 +183,6 @@
  serial requests and currently libcurl only supports that for HEAD and GET
  requests but it should also be possible for PUT.
 
-
 3. Documentation
 
 3.1  More and better
@@ -199,12 +191,12 @@
 
 4. FTP
 
-4.1 PRET
+4.1 HOST
 
- PRET is a command that primarily "drftpd" supports, which could be useful
- when using libcurl against such a server. It is a non-standard and a rather
- oddly designed command, but...
- http://curl.haxx.se/bug/feature.cgi?id=1729967
+ HOST is a suggested command in the works for a client to tell which host name
+ to use, to offer FTP servers named-based virtual hosting:
+
+ http://tools.ietf.org/html/draft-hethmon-mcmurray-ftp-hosts-11
 
 4.2 Alter passive/active on failure and retry
 
@@ -343,14 +335,6 @@ to provide the data to send.
  make the configure --with-ssl option first check for OpenSSL, then GnuTLS,
  then NSS...
 
-7.10 Make NTLM work with other crypto functions
-
- Get NTLM working using the functions provided by NSS etc. Not strictly
- SSL/TLS related, but hey... Another option is to get available DES and MD4
- source code from the cryptopp library. They are fine license-wise, but are
- C++. NTLM currenly only works when libcurl is built with OpenSSL or GnuTLS
- support.
-
 8. GnuTLS
 
 8.1 SSL engine stuff
@@ -362,54 +346,34 @@ to provide the data to send.
  Work out a common method with Peter Sylvester's OpenSSL-patch for SRP on the
  TLS to provide name and password. GnuTLS already supports it...
 
-8.3 non-blocking
-
- Fix the connection phase to be non-blocking when multi interface is used
-
-8.4 check connection
+8.3 check connection
 
  Add a way to check if the connection seems to be alive, to correspond to the
  SSL_peak() way we use with OpenSSL.
 
+8.4 non-gcrypt
+
+ libcurl assumes that there are gcrypt functions available when
+ GnuTLS is.
+
+ GnuTLS can be built to use libnettle instead as crypto library,
+ which breaks the previously mentioned assumption
+
+ The correct fix would be to detect which crypto layer that is in use and
+ adapt our code to use that instead of blindly assuming gcrypt.
+
 9. Other protocols
 
-9.1 ditch ldap-specific select
-
- * Look over the implementation. The looping will have to "go away" from the
-   lib/ldap.c source file and get moved to the main network code so that the
-   multi interface and friends will work for LDAP as well.
-
-9.2 stop TFTP blocking
-
-  Stop TFTP from being blocking and doing its own read loop in tftp_do.
-
 10. New protocols
 
-10.1 RTSP
-
- RFC2326 (protocol - very HTTP-like, also contains URL description)
-
-10.2 RSYNC
+10.1 RSYNC
 
  There's no RFC for protocol nor URI/URL format.  An implementation should
  most probably use an existing rsync library, such as librsync.
 
-10.3 RTMP
-
- There exists a patch that claims to introduce this protocol:
- http://osdir.com/ml/gnu.gnash.devel2/2006-11/msg00278.html, further details
- in the feature-request: http://curl.haxx.se/bug/feature.cgi?id=1843469
-
 11. Client
 
-11.1 Content-Disposition
-
- Add option that is similar to -O but that takes the output file name from the
- Content-Disposition: header, and/or uses the local file name used in
- redirections for the cases the server bounces the request further to a
- different file (name): http://curl.haxx.se/bug/feature.cgi?id=1364676
-
-11.2 sync
+11.1 sync
 
  "curl --sync http://example.com/feed[1-100].rss" or
  "curl --sync http://example.net/{index,calendar,history}.html"
@@ -418,12 +382,12 @@ to provide the data to send.
  remote file is newer than the local file. A Last-Modified HTTP date header
  should also be used to set the mod date on the downloaded file.
 
-11.3 glob posts
+11.2 glob posts
 
  Globbing support for -d and -F, as in 'curl -d "name=foo[0-9]" URL'.
  This is easily scripted though.
 
-11.4 prevent file overwriting
+11.3 prevent file overwriting
 
  Add an option that prevents cURL from overwriting existing local files. When
  used, and there already is an existing file with the target file name
@@ -431,18 +395,14 @@ to provide the data to send.
  existing). So that index.html becomes first index.html.1 and then
  index.html.2 etc.
 
-11.5 ftp wildcard download
-
- "curl ftp://site.com/*.txt"
-
-11.6 simultaneous parallel transfers
+11.4 simultaneous parallel transfers
 
  The client could be told to use maximum N simultaneous parallel transfers and
  then just make sure that happens. It should of course not make more than one
  connection to the same remote host. This would require the client to use the
  multi interface. http://curl.haxx.se/bug/feature.cgi?id=1558595
 
-11.7 provide formpost headers
+11.5 provide formpost headers
 
  Extending the capabilities of the multipart formposting. How about leaving
  the ';type=foo' syntax as it is and adding an extra tag (headers) which
@@ -456,7 +416,7 @@ to provide the data to send.
  which should overwrite the program reasonable defaults (plain/text,
  8bit...)
 
-11.8 url-specific options
+11.6 url-specific options
 
  Provide a way to make options bound to a specific URL among several on the
  command line. Possibly by letting ':' separate options between URLs,
@@ -470,12 +430,12 @@ to provide the data to send.
 
  The example would do a POST-GET-POST combination on a single command line.
 
-11.9 metalink support
+11.7 metalink support
 
  Add metalink support to curl (http://www.metalinker.org/). This is most useful
  with simultaneous parallel transfers (11.6) but not necessary.
 
-11.10 warning when setting an option
+11.8 warning when setting an option
 
   Display a warning when libcurl returns an error when setting an option.
   This can be useful to tell when support for a particular feature hasn't been

docs/TheArtOfHttpScripting

@@ -38,10 +38,10 @@ Date:    May 28, 2008
  request a particular action, and then the server replies a few text lines
  before the actual requested content is sent to the client.
 
- Using curl's option -v will display what kind of commands curl sends to the
- server, as well as a few other informational texts. -v is the single most
- useful option when it comes to debug or even understand the curl<->server
- interaction.
+ Using curl's option --verbose (-v as a short option) will display what kind of
+ commands curl sends to the server, as well as a few other informational texts. 
+ --verbose is the single most useful option when it comes to debug or even
+ understand the curl<->server interaction.
 
 2. URL
 
@@ -62,9 +62,9 @@ Date:    May 28, 2008
  that that URL holds.
 
  All HTTP replies contain a set of headers that are normally hidden, use
- curl's -i option to display them as well as the rest of the document. You can
- also ask the remote server for ONLY the headers by using the -I option (which
- will make curl issue a HEAD request).
+ curl's --include (-i) option to display them as well as the rest of the
+ document. You can also ask the remote server for ONLY the headers by using the
+ --head (-I) option (which will make curl issue a HEAD request).
 
 4. Forms
 
@@ -103,7 +103,7 @@ Date:    May 28, 2008
   To make curl do the GET form post for you, just enter the expected created
   URL:
 
-        curl "www.hotmail.com/when/junk.cgi?birthyear=1905&press=OK"
+        curl "http://www.hotmail.com/when/junk.cgi?birthyear=1905&press=OK"
 
  4.2 POST
 
@@ -127,7 +127,7 @@ Date:    May 28, 2008
   And to use curl to post this form with the same data filled in as before, we
   could do it like:
 
-        curl -d "birthyear=1905&press=%20OK%20" www.hotmail.com/when/junk.cgi
+        curl --data "birthyear=1905&press=%20OK%20" http://www.hotmail.com/when/junk.cgi
 
   This kind of POST will use the Content-Type
   application/x-www-form-urlencoded and is the most widely used POST kind.
@@ -139,7 +139,7 @@ Date:    May 28, 2008
 
   Recent curl versions can in fact url-encode POST data for you, like this:
 
-        curl --data-urlencode "name=I am Daniel" www.example.com
+        curl --data-urlencode "name=I am Daniel" http://www.example.com
 
  4.3 File Upload POST
 
@@ -160,7 +160,7 @@ Date:    May 28, 2008
 
   To post to a form like this with curl, you enter a command line like:
 
-        curl -F upload=@localfilename -F press=OK [URL]
+        curl --form upload=@localfilename --form press=OK [URL]
 
  4.4 Hidden Fields
 
@@ -181,7 +181,7 @@ Date:    May 28, 2008
   To post this with curl, you won't have to think about if the fields are
   hidden or not. To curl they're all the same:
 
-        curl -d "birthyear=1905&press=OK&person=daniel" [URL]
+        curl --data "birthyear=1905&press=OK&person=daniel" [URL]
 
  4.5 Figure Out What A POST Looks Like
 
@@ -204,7 +204,7 @@ Date:    May 28, 2008
 
  Put a file to a HTTP server with curl:
 
-        curl -T uploadfile www.uploadhttp.com/receive.cgi
+        curl --upload-file uploadfile http://www.uploadhttp.com/receive.cgi
 
 6. HTTP Authentication
 
@@ -217,7 +217,7 @@ Date:    May 28, 2008
 
  To tell curl to use a user and password for authentication:
 
-        curl -u name:password www.secrets.com
+        curl --user name:password http://www.secrets.com
 
  The site might require a different authentication method (check the headers
  returned by the server), and then --ntlm, --digest, --negotiate or even
@@ -228,7 +228,7 @@ Date:    May 28, 2008
  may require its own user and password to allow the client to get through to
  the Internet. To specify those with curl, run something like:
 
-        curl -U proxyuser:proxypassword curl.haxx.se
+        curl --proxy-user proxyuser:proxypassword curl.haxx.se
 
  If your proxy requires the authentication to be done using the NTLM method,
  use --proxy-ntlm, if it requires Digest use --proxy-digest.
@@ -257,7 +257,7 @@ Date:    May 28, 2008
 
  Use curl to set the referer field with:
 
-        curl -e http://curl.haxx.se daniel.haxx.se
+        curl --referer http://curl.haxx.se http://daniel.haxx.se
 
 8. User Agent
 
@@ -275,11 +275,11 @@ Date:    May 28, 2008
 
  To make curl look like Internet Explorer on a Windows 2000 box:
 
-        curl -A "Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)" [URL]
+        curl --user-agent "Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)" [URL]
 
  Or why not look like you're using Netscape 4.73 on a Linux (PIII) box:
 
-        curl -A "Mozilla/4.73 [en] (X11; U; Linux 2.2.15 i686)" [URL]
+        curl --user-agent "Mozilla/4.73 [en] (X11; U; Linux 2.2.15 i686)" [URL]
 
 9. Redirects
 
@@ -294,11 +294,12 @@ Date:    May 28, 2008
 
  To tell curl to follow a Location:
 
-        curl -L www.sitethatredirects.com
+        curl --location http://www.sitethatredirects.com
 
  If you use curl to POST to a site that immediately redirects you to another
- page, you can safely use -L and -d/-F together. Curl will only use POST in
- the first request, and then revert to GET in the following operations.
+ page, you can safely use --location (-L) and --data/--form together. Curl will
+ only use POST in the first request, and then revert to GET in the following
+ operations.
 
 10. Cookies
 
@@ -320,16 +321,16 @@ Date:    May 28, 2008
  The simplest way to send a few cookies to the server when getting a page with
  curl is to add them on the command line like:
 
-        curl -b "name=Daniel" www.cookiesite.com
+        curl --cookie "name=Daniel" http://www.cookiesite.com
 
  Cookies are sent as common HTTP headers. This is practical as it allows curl
  to record cookies simply by recording headers. Record cookies with curl by
- using the -D option like:
+ using the --dump-header (-D) option like:
 
-        curl -D headers_and_cookies www.cookiesite.com
+        curl --dump-header headers_and_cookies http://www.cookiesite.com
 
- (Take note that the -c option described below is a better way to store
- cookies.)
+ (Take note that the --cookie-jar option described below is a better way to
+ store cookies.)
 
  Curl has a full blown cookie parsing engine built-in that comes to use if you
  want to reconnect to a server and use cookies that were stored from a
@@ -337,24 +338,24 @@ Date:    May 28, 2008
  believing you had a previous connection). To use previously stored cookies,
  you run curl like:
 
-        curl -b stored_cookies_in_file www.cookiesite.com
+        curl --cookie stored_cookies_in_file http://www.cookiesite.com
 
- Curl's "cookie engine" gets enabled when you use the -b option. If you only
- want curl to understand received cookies, use -b with a file that doesn't
- exist. Example, if you want to let curl understand cookies from a page and
- follow a location (and thus possibly send back cookies it received), you can
- invoke it like:
+ Curl's "cookie engine" gets enabled when you use the --cookie option. If you
+ only want curl to understand received cookies, use --cookie with a file that
+ doesn't exist. Example, if you want to let curl understand cookies from a page 
+ and follow a location (and thus possibly send back cookies it received), you
+ can invoke it like:
 
-        curl -b nada -L www.cookiesite.com
+        curl --cookie nada --location http://www.cookiesite.com
 
  Curl has the ability to read and write cookie files that use the same file
  format that Netscape and Mozilla do. It is a convenient way to share cookies
- between browsers and automatic scripts. The -b switch automatically detects
- if a given file is such a cookie file and parses it, and by using the
- -c/--cookie-jar option you'll make curl write a new cookie file at the end of
+ between browsers and automatic scripts. The --cookie (-b) switch automatically
+ detects if a given file is such a cookie file and parses it, and by using the
+ --cookie-jar (-c) option you'll make curl write a new cookie file at the end of
  an operation:
 
-        curl -b cookies.txt -c newcookies.txt www.cookiesite.com
+        curl --cookie cookies.txt --cookie-jar newcookies.txt http://www.cookiesite.com
 
 11. HTTPS
 
@@ -381,13 +382,13 @@ Date:    May 28, 2008
   can be specified on the command line or if not, entered interactively when
   curl queries for it. Use a certificate with curl on a HTTPS server like:
 
-        curl -E mycert.pem https://that.secure.server.com
+        curl --cert mycert.pem https://that.secure.server.com
 
   curl also tries to verify that the server is who it claims to be, by
   verifying the server's certificate against a locally stored CA cert
   bundle. Failing the verification will cause curl to deny the connection. You
-  must then use -k in case you want to tell curl to ignore that the server
-  can't be verified.
+  must then use --insecure (-k) in case you want to tell curl to ignore that
+  the server can't be verified.
 
   More about server certificate verification and ca cert bundles can be read
   in the SSLCERTS document, available online here:
@@ -402,17 +403,17 @@ Date:    May 28, 2008
  For example, you can change the POST request to a PROPFIND and send the data
  as "Content-Type: text/xml" (instead of the default Content-Type) like this:
 
-        curl -d "<xml>" -H "Content-Type: text/xml" -X PROPFIND url.com
+        curl --data "<xml>" --header "Content-Type: text/xml" --request PROPFIND url.com
 
  You can delete a default header by providing one without content. Like you
  can ruin the request by chopping off the Host: header:
 
-        curl -H "Host:" http://mysite.com
+        curl --header "Host:" http://mysite.com
 
  You can add headers the same way. Your server may want a "Destination:"
  header, and you can add it:
 
-        curl -H "Destination: http://moo.com/nowhere" http://url.com
+        curl --header "Destination: http://moo.com/nowhere" http://url.com
 
 13. Web Login
 
@@ -456,8 +457,8 @@ Date:    May 28, 2008
  * Use the --trace-ascii option to store fully detailed logs of the requests
    for easier analyzing and better understanding
 
- * Make sure you check for and use cookies when needed (both reading with -b
-   and writing with -c)
+ * Make sure you check for and use cookies when needed (both reading with
+   --cookie and writing with --cookie-jar)
 
  * Set user-agent to one like a recent popular browser does
 

docs/curl.1

@@ -29,8 +29,9 @@ curl \- transfer a URL
 .SH DESCRIPTION
 .B curl
 is a tool to transfer data from or to a server, using one of the supported
-protocols (HTTP, HTTPS, FTP, FTPS, SCP, SFTP, TFTP, DICT, TELNET, LDAP or
-FILE).  The command is designed to work without user interaction.
+protocols (DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP,
+LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP).  The
+command is designed to work without user interaction.
 
 curl offers a busload of useful tricks like proxy support, user
 authentication, FTP upload, HTTP post, SSL connections, cookies, file transfer
@@ -55,16 +56,16 @@ or you can get sequences of alphanumeric series by using [] as in:
  ftp://ftp.numericals.com/file[001-100].txt    (with leading zeros)
  ftp://ftp.letters.com/file[a-z].txt
 
-No nesting of the sequences is supported at the moment, but you can use
-several ones next to each other:
+Nested sequences are not supported, but you can use several ones next to each
+other:
 
  http://any.org/archive[1996-1999]/vol[1-4]/part{a,b,c}.html
 
 You can specify any amount of URLs on the command line. They will be fetched
 in a sequential manner in the specified order.
 
-Since curl 7.15.1 you can also specify a step counter for the ranges, so that
-you can get every Nth number or letter:
+You can specify a step counter for the ranges to get every Nth number or
+letter:
 
  http://www.numericals.com/file[1-100:10].txt
  http://www.letters.com/file[a-z:2].txt
@@ -87,8 +88,8 @@ invokes.
 curl normally displays a progress meter during operations, indicating the amount
 of transferred data, transfer speeds and estimated time left, etc.
 
-However, since curl displays this data to the terminal by default, if you invoke
-curl to do an operation and it is about to write data to the terminal, it
+curl displays this data to the terminal by default, so if you invoke curl to
+do an operation and it is about to write data to the terminal, it
 \fIdisables\fP the progress meter as otherwise it would mess up the output
 mixing progress meter and response data.
 
@@ -300,8 +301,8 @@ away. EPRT and LPRT are extensions to the original FTP protocol, and may not wor
 on all servers, but they enable more functionality in a better way than the
 traditional PORT command.
 
-Since curl 7.19.0, \fB--eprt\fP can be used to explicitly enable EPRT again
-and \fB--no-eprt\fP is an alias for \fB--disable-eprt\fP.
+\fB--eprt\fP can be used to explicitly enable EPRT again and \fB--no-eprt\fP
+is an alias for \fB--disable-eprt\fP.
 
 Disabling EPRT only changes the active behavior. If you want to switch to
 passive mode you need to not use \fI-P/--ftp-port\fP or force it with
@@ -311,8 +312,8 @@ passive mode you need to not use \fI-P/--ftp-port\fP or force it with
 transfers. Curl will normally always first attempt to use EPSV before PASV,
 but with this option, it will not try using EPSV.
 
-Since curl 7.19.0, \fB--epsv\fP can be used to explicitly enable EPRT again
-and \fB--no-epsv\fP is an alias for \fB--disable-epsv\fP.
+\fB--epsv\fP can be used to explicitly enable EPRT again and \fB--no-epsv\fP
+is an alias for \fB--disable-epsv\fP.
 
 Disabling EPSV only changes the passive behavior. If you want to switch to
 active mode you need to use \fI-P/--ftp-port\fP.
@@ -927,6 +928,52 @@ in web browsers, so curl does the conversion by default to maintain
 consistency. However, a server may require a POST to remain a POST after such
 a redirection. This option is meaningful only when using \fI-L/--location\fP
 (Added in 7.19.1)
+.IP "--proto <protocols>"
+Tells curl to use the listed protocols for its initial retrieval. Protocols
+are evaluated left to right, are comma separated, and are each a protocol
+name or 'all', optionally prefixed by zero or more modifiers. Available
+modifiers are:
+.RS
+.TP 3
+.B +
+Permit this protocol in addition to protocols already permitted (this is
+the default if no modifier is used).
+.TP
+.B -
+Deny this protocol, removing it from the list of protocols already permitted.
+.TP
+.B =
+Permit only this protocol (ignoring the list already permitted), though
+subject to later modification by subsequent entries in the comma separated
+list.
+.RE
+.IP
+For example:
+.RS
+.TP 15
+.B --proto -ftps
+uses the default protocols, but disables ftps
+.TP
+.B  --proto -all,https,+http
+only enables http and https
+.TP
+.B --proto =http,https
+also only enables http and https
+.RE
+.IP
+Unknown protocols produce a warning. This allows scripts to safely rely on
+being able to disable potentially dangerous protocols, without relying upon
+support for that protocol being built into curl to avoid an error.
+
+This option can be used multiple times, in which case the effect is the same
+as concatenating the protocols into one instance of the option.
+
+(Added in 7.20.2)
+.IP "--proto-redir <protocols>"
+Tells curl to use the listed protocols after a redirect. See --proto for
+how protocols are represented.
+
+(Added in 7.20.2)
 .IP "--proxy-anyauth"
 Tells curl to pick a suitable authentication method when communicating with
 the given proxy. This might cause an extra request/response round-trip. (Added

docs/examples/.gitignore

@@ -0,0 +1,32 @@
+10-at-a-time
+anyauthput
+certinfo
+chkspeed
+cookie_interface
+debug
+fileupload
+fopen
+ftp-wildcard
+ftpget
+ftpgetinfo
+ftpgetresp
+ftpupload
+getinfo
+getinmemory
+http-post
+httpcustomheader
+httpput
+https
+multi-app
+multi-debugcallback
+multi-double
+multi-post
+multi-single
+persistant
+post-callback
+postit2
+sendrecv
+sepheaders
+simple
+simplepost
+simplessl

docs/examples/10-at-a-time.c

@@ -119,7 +119,7 @@ int main(void)
   }
 
   while (U) {
-    while (CURLM_CALL_MULTI_PERFORM == curl_multi_perform(cm, &U));
+    curl_multi_perform(cm, &U);
 
     if (U) {
       FD_ZERO(&R);

docs/examples/Makefile.inc

@@ -1,16 +1,12 @@
 # These are all libcurl example programs to be test compiled
-check_PROGRAMS = 10-at-a-time anyauthput cookie_interface \
-  debug fileupload fopen ftpget ftpgetresp ftpupload \
-  getinfo getinmemory http-post httpput \
-  https multi-app multi-debugcallback multi-double \
-  multi-post multi-single persistant post-callback \
-  postit2 sepheaders simple simplepost simplessl \
-  sendrecv httpcustomheader certinfo chkspeed ftpgetinfo
+check_PROGRAMS = 10-at-a-time anyauthput cookie_interface debug fileupload \
+  fopen ftpget ftpgetresp ftpupload getinfo getinmemory http-post httpput  \
+  https multi-app multi-debugcallback multi-double multi-post multi-single \
+  persistant post-callback postit2 sepheaders simple simplepost simplessl  \
+  sendrecv httpcustomheader certinfo chkspeed ftpgetinfo ftp-wildcard
 
 # These examples require external dependencies that may not be commonly
 # available on POSIX systems, so don't bother attempting to compile them here.
-COMPLICATED_EXAMPLES = \
- curlgtk.c curlx.c htmltitle.cc cacertinmem.c ftpuploadresume.c \
- ghiper.c hiperfifo.c htmltidy.c multithread.c \
+COMPLICATED_EXAMPLES = curlgtk.c curlx.c htmltitle.cc cacertinmem.c	   \
+  ftpuploadresume.c ghiper.c hiperfifo.c htmltidy.c multithread.c	   \
   opensslthreadlock.c sampleconv.c synctime.c threaded-ssl.c evhiperfifo.c
-

docs/examples/cacertinmem.c

@@ -111,7 +111,7 @@ int main(void)
   rv=curl_easy_setopt(ch,CURLOPT_WRITEHEADER, stderr);
   rv=curl_easy_setopt(ch,CURLOPT_SSLCERTTYPE,"PEM");
   rv=curl_easy_setopt(ch,CURLOPT_SSL_VERIFYPEER,1L);
-  rv=curl_easy_setopt(ch, CURLOPT_URL, "https://www.cacert.org/");
+  rv=curl_easy_setopt(ch, CURLOPT_URL, "https://www.example.com/");
 
   /* first try: retrieve page without cacerts' certificate -> will fail
    */

docs/examples/certinfo.c

@@ -20,7 +20,7 @@ int main(int argc, char **argv)
 
   curl = curl_easy_init();
   if(curl) {
-    curl_easy_setopt(curl, CURLOPT_URL, "https://www.networking4all.com/");
+    curl_easy_setopt(curl, CURLOPT_URL, "https://www.example.com/");
 
     curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, wrfu);
 

docs/examples/chkspeed.c

@@ -40,6 +40,8 @@ static size_t WriteCallback(void *ptr, size_t size, size_t nmemb, void *data)
 {
   /* we are not interested in the downloaded bytes itself,
      so we only return the size we would have saved ... */
+  (void)ptr;  /* unused */
+  (void)data; /* unused */
   return (size_t)(size * nmemb);
 }
 
@@ -48,7 +50,7 @@ int main(int argc, char *argv[])
   CURL *curl_handle;
   CURLcode res;
   int prtsep = 0, prttime = 0;
-  char *url = URL_1M;
+  const char *url = URL_1M;
   char *appname = argv[0];
 
   if (argc > 1) {
@@ -135,17 +137,17 @@ int main(int argc, char *argv[])
 
     /* check for bytes downloaded */
     res = curl_easy_getinfo(curl_handle, CURLINFO_SIZE_DOWNLOAD, &val);
-    if((CURLE_OK == res) && val)
+    if((CURLE_OK == res) && (val>0))
       printf("Data downloaded: %0.0f bytes.\n", val);
 
     /* check for total download time */
     res = curl_easy_getinfo(curl_handle, CURLINFO_TOTAL_TIME, &val);
-    if((CURLE_OK == res) && val)
+    if((CURLE_OK == res) && (val>0))
       printf("Total download time: %0.3f sec.\n", val);
 
     /* check for average download speed */
     res = curl_easy_getinfo(curl_handle, CURLINFO_SPEED_DOWNLOAD, &val);
-    if((CURLE_OK == res) && val)
+    if((CURLE_OK == res) && (val>0))
       printf("Average download speed: %0.3f kbyte/sec.\n", val / 1024);
 
   } else {

docs/examples/cookie_interface.c

@@ -53,7 +53,7 @@ main(void)
   if (curl) {
     char nline[256];
 
-    curl_easy_setopt(curl, CURLOPT_URL, "http://www.google.com/"); /* google.com sets "PREF" cookie */
+    curl_easy_setopt(curl, CURLOPT_URL, "http://www.example.com/");
     curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);
     curl_easy_setopt(curl, CURLOPT_COOKIEFILE, ""); /* just to start the cookie engine */
     res = curl_easy_perform(curl);

docs/examples/debug.c

@@ -118,7 +118,7 @@ int main(void)
     /* the DEBUGFUNCTION has no effect until we enable VERBOSE */
     curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);
 
-    curl_easy_setopt(curl, CURLOPT_URL, "curl.haxx.se");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://example.com/");
     res = curl_easy_perform(curl);
 
     /* always cleanup */

docs/examples/evhiperfifo.c

@@ -68,7 +68,6 @@ typedef struct _GlobalInfo
   struct ev_io fifo_event;
   struct ev_timer timer_event;
   CURLM *multi;
-  int prev_running;
   int still_running;
   FILE* input;
 } GlobalInfo;
@@ -122,7 +121,6 @@ static void mcode_or_die(const char *where, CURLMcode code)
     switch ( code )
     {
     case CURLM_CALL_MULTI_PERFORM: s="CURLM_CALL_MULTI_PERFORM"; break;
-    case CURLM_OK:                 s="CURLM_OK";                 break;
     case CURLM_BAD_HANDLE:         s="CURLM_BAD_HANDLE";         break;
     case CURLM_BAD_EASY_HANDLE:    s="CURLM_BAD_EASY_HANDLE";    break;
     case CURLM_OUT_OF_MEMORY:      s="CURLM_OUT_OF_MEMORY";      break;
@@ -144,39 +142,20 @@ static void mcode_or_die(const char *where, CURLMcode code)
 
 
 /* Check for completed transfers, and remove their easy handles */
-static void check_run_count(GlobalInfo *g)
+static void check_multi_info(GlobalInfo *g)
 {
-  DPRINT("%s prev %i still %i\n", __PRETTY_FUNCTION__,
-         g->prev_running, g->still_running);
-  if ( g->prev_running > g->still_running )
-  {
-    char *eff_url=NULL;
+  char *eff_url;
   CURLMsg *msg;
   int msgs_left;
-    ConnInfo *conn=NULL;
-    CURL*easy;
+  ConnInfo *conn;
+  CURL *easy;
   CURLcode res;
 
   fprintf(MSG_OUT, "REMAINING: %d\n", g->still_running);
-    /*
-      I am still uncertain whether it is safe to remove an easy
-      handle from inside the curl_multi_info_read loop, so here I
-      will search for completed transfers in the inner "while"
-      loop, and then remove them in the outer "do-while" loop...
-    */
-    do
-    {
-      easy=NULL;
-      while ( (msg = curl_multi_info_read(g->multi, &msgs_left)) )
-      {
-        if ( msg->msg == CURLMSG_DONE )
-        {
-          easy=msg->easy_handle;
-          res=msg->data.result;
-        }
-
-        if ( easy )
-        {
+  while ((msg = curl_multi_info_read(g->multi, &msgs_left))) {
+    if (msg->msg == CURLMSG_DONE) {
+      easy = msg->easy_handle;
+      res = msg->data.result;
       curl_easy_getinfo(easy, CURLINFO_PRIVATE, &conn);
       curl_easy_getinfo(easy, CURLINFO_EFFECTIVE_URL, &eff_url);
       fprintf(MSG_OUT, "DONE: %s => (%d) %s\n", eff_url, res, conn->error);
@@ -186,12 +165,10 @@ static void check_run_count(GlobalInfo *g)
       free(conn);
     }
   }
-    } while ( easy );
-  }
-  g->prev_running = g->still_running;
 }
 
 
+
 /* Called by libevent when we get action on a multi socket */
 static void event_cb(EV_P_ struct ev_io *w, int revents)
 {
@@ -201,12 +178,9 @@ static void event_cb(EV_P_ struct ev_io *w, int revents)
 
   int action = (revents&EV_READ?CURL_POLL_IN:0)|
     (revents&EV_WRITE?CURL_POLL_OUT:0);
-  do
-  {
   rc = curl_multi_socket_action(g->multi, w->fd, action, &g->still_running);
-  } while ( rc == CURLM_CALL_MULTI_PERFORM );
-  mcode_or_die("event_cb: curl_multi_socket", rc);
-  check_run_count(g);
+  mcode_or_die("event_cb: curl_multi_socket_action", rc);
+  check_multi_info(g);
   if ( g->still_running <= 0 )
   {
     fprintf(MSG_OUT, "last transfer done, kill timeout\n");
@@ -222,12 +196,9 @@ static void timer_cb(EV_P_ struct ev_timer *w, int revents)
   GlobalInfo *g = (GlobalInfo *)w->data;
   CURLMcode rc;
 
-  do
-  {
   rc = curl_multi_socket_action(g->multi, CURL_SOCKET_TIMEOUT, 0, &g->still_running);
-  } while ( rc == CURLM_CALL_MULTI_PERFORM );
-  mcode_or_die("timer_cb: curl_multi_socket", rc);
-  check_run_count(g);
+  mcode_or_die("timer_cb: curl_multi_socket_action", rc);
+  check_multi_info(g);
 }
 
 /* Clean up the SockInfo structure */
@@ -364,11 +335,11 @@ static void new_conn(char *url, GlobalInfo *g )
 
   fprintf(MSG_OUT,
           "Adding easy %p to multi %p (%s)\n", conn->easy, g->multi, url);
-  rc =curl_multi_add_handle(g->multi, conn->easy);
+  rc = curl_multi_add_handle(g->multi, conn->easy);
   mcode_or_die("new_conn: curl_multi_add_handle", rc);
 
-  mcode_or_die("new_conn: curl_multi_socket_all", rc);
-  check_run_count(g);
+  /* note that the add_handle() will set a time-out to trigger very soon so
+     that the necessary socket_action() call will be called by this app */
 }
 
 /* This gets called whenever data is received from the fifo */
@@ -448,10 +419,9 @@ int main(int argc, char **argv)
   curl_multi_setopt(g.multi, CURLMOPT_SOCKETDATA, &g);
   curl_multi_setopt(g.multi, CURLMOPT_TIMERFUNCTION, multi_timer_cb);
   curl_multi_setopt(g.multi, CURLMOPT_TIMERDATA, &g);
-  do
-  {
-    rc = curl_multi_socket_all(g.multi, &g.still_running);
-  } while ( CURLM_CALL_MULTI_PERFORM == rc );
+
+  /* we don't call any curl_multi_socket*() function yet as we have no handles
+     added! */
 
   ev_loop(g.loop, 0);
   curl_multi_cleanup(g.multi);

docs/examples/fopen.c

@@ -131,7 +131,6 @@ fill_buffer(URL_FILE *file,int want,int waittime)
     fd_set fdread;
     fd_set fdwrite;
     fd_set fdexcep;
-    int maxfd;
     struct timeval timeout;
     int rc;
 
@@ -144,6 +143,9 @@ fill_buffer(URL_FILE *file,int want,int waittime)
     /* attempt to fill buffer */
     do
     {
+        int maxfd = -1;
+        long curl_timeo = -1;
+
         FD_ZERO(&fdread);
         FD_ZERO(&fdwrite);
         FD_ZERO(&fdexcep);
@@ -152,12 +154,23 @@ fill_buffer(URL_FILE *file,int want,int waittime)
         timeout.tv_sec = 60; /* 1 minute */
         timeout.tv_usec = 0;
 
+        curl_multi_timeout(multi_handle, &curl_timeo);
+        if(curl_timeo >= 0) {
+          timeout.tv_sec = curl_timeo / 1000;
+          if(timeout.tv_sec > 1)
+            timeout.tv_sec = 1;
+          else
+            timeout.tv_usec = (curl_timeo % 1000) * 1000;
+        }
+
         /* get file descriptors from the transfers */
         curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
         /* In a real-world program you OF COURSE check the return code of the
-           function calls, *and* you make sure that maxfd is bigger than -1
-           so that the call to select() below makes sense! */
+           function calls.  On success, the value of maxfd is guaranteed to be
+           greater or equal than -1.  We call select(maxfd + 1, ...), specially
+           in case of (maxfd == -1), we call select(0, ...), which is basically
+           equal to sleep. */
 
         rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 
@@ -171,12 +184,7 @@ fill_buffer(URL_FILE *file,int want,int waittime)
 
         default:
             /* timeout or readable/writable sockets */
-            /* note we *could* be more efficient and not wait for
-             * CURLM_CALL_MULTI_PERFORM to clear here and check it on re-entry
-             * but that gets messy */
-            while(curl_multi_perform(multi_handle, &file->still_running) ==
-                  CURLM_CALL_MULTI_PERFORM);
-
+            curl_multi_perform(multi_handle, &file->still_running);
             break;
         }
     } while(file->still_running && (file->buffer_pos < want));
@@ -247,8 +255,7 @@ url_fopen(const char *url,const char *operation)
         curl_multi_add_handle(multi_handle, file->handle.curl);
 
         /* lets start the fetch */
-        while(curl_multi_perform(multi_handle, &file->still_running) ==
-              CURLM_CALL_MULTI_PERFORM );
+        curl_multi_perform(multi_handle, &file->still_running);
 
         if((file->buffer_pos == 0) && (!file->still_running))
         {

docs/examples/ftp-wildcard.c

@@ -0,0 +1,135 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ */
+
+#include <curl/curl.h>
+#include <stdio.h>
+
+struct callback_data {
+  FILE *output;
+};
+
+static long file_is_comming(struct curl_fileinfo *finfo,
+                            struct callback_data *data,
+                            int remains);
+
+static long file_is_downloaded(struct callback_data *data);
+
+static size_t write_it(char *buff, size_t size, size_t nmemb,
+                       struct callback_data *data);
+
+int main(int argc, char **argv)
+{
+  int rc = CURLE_OK;
+
+  /* curl easy handle */
+  CURL *handle;
+
+  /* help data */
+  struct callback_data data = { 0 };
+
+  /* global initialization */
+  rc = curl_global_init(CURL_GLOBAL_ALL);
+  if(rc)
+    return rc;
+
+  /* initialization of easy handle */
+  handle = curl_easy_init();
+  if(!handle) {
+    curl_global_cleanup();
+    return CURLE_OUT_OF_MEMORY;
+  }
+
+  /* turn on wildcard matching */
+  curl_easy_setopt(handle, CURLOPT_WILDCARDMATCH, 1L);
+
+  /* callback is called before download of concrete file started */
+  curl_easy_setopt(handle, CURLOPT_CHUNK_BGN_FUNCTION, file_is_comming);
+
+  /* callback is called after data from the file have been transferred */
+  curl_easy_setopt(handle, CURLOPT_CHUNK_END_FUNCTION, file_is_downloaded);
+
+  /* this callback will write contents into files */
+  curl_easy_setopt(handle, CURLOPT_WRITEFUNCTION, write_it);
+
+  /* put transfer data into callbacks */
+  curl_easy_setopt(handle, CURLOPT_CHUNK_DATA, &data);
+  curl_easy_setopt(handle, CURLOPT_WRITEDATA, &data);
+
+  /* curl_easy_setopt(handle, CURLOPT_VERBOSE, 1L); */
+
+  /* set an URL containing wildcard pattern (only in the last part) */
+  if(argc == 2)
+    curl_easy_setopt(handle, CURLOPT_URL, argv[1]);
+  else
+    curl_easy_setopt(handle, CURLOPT_URL, "ftp://example.com/test/*");
+
+  /* and start transfer! */
+  rc = curl_easy_perform(handle);
+
+  curl_easy_cleanup(handle);
+  curl_global_cleanup();
+  return rc;
+}
+
+static long file_is_comming(struct curl_fileinfo *finfo,
+                            struct callback_data *data,
+                            int remains)
+{
+  printf("%3d %40s %10luB ", remains, finfo->filename,
+         (unsigned long)finfo->size);
+
+  switch(finfo->filetype) {
+  case CURLFILETYPE_DIRECTORY:
+    printf(" DIR\n");
+    break;
+  case CURLFILETYPE_FILE:
+    printf("FILE ");
+    break;
+  default:
+    printf("OTHER\n");
+    break;
+  }
+
+  if(finfo->filetype == CURLFILETYPE_FILE) {
+    /* do not transfer files >= 50B */
+    if(finfo->size > 50) {
+      printf("SKIPPED\n");
+      return CURL_CHUNK_BGN_FUNC_SKIP;
+    }
+
+    data->output = fopen(finfo->filename, "w");
+    if(!data->output) {
+      return CURL_CHUNK_BGN_FUNC_FAIL;
+    }
+  }
+
+  return CURL_CHUNK_BGN_FUNC_OK;
+}
+
+static long file_is_downloaded(struct callback_data *data)
+{
+  if(data->output) {
+    printf("DOWNLOADED\n");
+    fclose(data->output);
+    data->output = 0x0;
+  }
+  return CURL_CHUNK_END_FUNC_OK;
+}
+
+static size_t write_it(char *buff, size_t size, size_t nmemb,
+                       struct callback_data *data)
+{
+  size_t written = 0;
+  if(data->output)
+    written = fwrite(buff, size, nmemb, data->output);
+  else
+    /* listing output */
+    written = fwrite(buff, size, nmemb, stdout);
+  return written;
+}

docs/examples/ftpget.c

@@ -52,12 +52,10 @@ int main(void)
   curl = curl_easy_init();
   if(curl) {
     /*
-     * Get curl 7.9.2 from sunet.se's FTP site. curl 7.9.2 is most likely not
-     * present there by the time you read this, so you'd better replace the
-     * URL with one that works!
+     * You better replace the URL with one that works!
      */
     curl_easy_setopt(curl, CURLOPT_URL,
-                     "ftp://ftp.sunet.se/pub/www/utilities/curl/curl-7.9.2.tar.gz");
+                     "ftp://ftp.example.com/pub/www/utilities/curl/curl-7.9.2.tar.gz");
     /* Define our callback to get called when there's data to be written */
     curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, my_fwrite);
     /* Set a pointer to our struct to pass to the callback */

docs/examples/ftpgetinfo.c

@@ -28,8 +28,7 @@ static size_t throw_away(void *ptr, size_t size, size_t nmemb, void *data)
 
 int main(void)
 {
-  /* Check for binutils 2.19.1 from ftp.gnu.org's FTP site. */
-  char ftpurl[] = "ftp://ftp.gnu.org/gnu/binutils/binutils-2.19.1.tar.bz2";
+  char ftpurl[] = "ftp://ftp.example.com/gnu/binutils/binutils-2.19.1.tar.bz2";
   CURL *curl;
   CURLcode res;
   const time_t filetime;

docs/examples/ftpgetresp.c

@@ -43,7 +43,7 @@ int main(int argc, char **argv)
   curl = curl_easy_init();
   if(curl) {
     /* Get a file listing from sunet */
-    curl_easy_setopt(curl, CURLOPT_URL, "ftp://ftp.sunet.se/");
+    curl_easy_setopt(curl, CURLOPT_URL, "ftp://ftp.example.com/");
     curl_easy_setopt(curl, CURLOPT_WRITEDATA, ftpfile);
     /* If you intend to use this on windows with a libcurl DLL, you must use
        CURLOPT_WRITEFUNCTION as well */

docs/examples/ftpupload.c

@@ -30,7 +30,7 @@
 
 #define LOCAL_FILE      "/tmp/uploadthis.txt"
 #define UPLOAD_FILE_AS  "while-uploading.txt"
-#define REMOTE_URL      "ftp://localhost/"  UPLOAD_FILE_AS
+#define REMOTE_URL      "ftp://example.com/"  UPLOAD_FILE_AS
 #define RENAME_FILE_TO  "renamed-and-fine.txt"
 
 /* NOTE: if you want this example to work on Windows with libcurl as a

docs/examples/ftpuploadresume.c

@@ -32,7 +32,8 @@ int __cdecl _snscanf(const char * input, size_t length, const char * format, ...
 
 
 /* parse headers for Content-Length */
-size_t getcontentlengthfunc(void *ptr, size_t size, size_t nmemb, void *stream) {
+size_t getcontentlengthfunc(void *ptr, size_t size, size_t nmemb, void *stream)
+{
   int r;
   long len = 0;
 
@@ -46,7 +47,8 @@ size_t getcontentlengthfunc(void *ptr, size_t size, size_t nmemb, void *stream)
 }
 
 /* discard downloaded data */
-size_t discardfunc(void *ptr, size_t size, size_t nmemb, void *stream) {
+size_t discardfunc(void *ptr, size_t size, size_t nmemb, void *stream)
+{
   return size * nmemb;
 }
 
@@ -143,13 +145,14 @@ int upload(CURL *curlhandle, const char * remotepath, const char * localpath,
   }
 }
 
-int main(int c, char **argv) {
+int main(int c, char **argv)
+{
   CURL *curlhandle = NULL;
 
   curl_global_init(CURL_GLOBAL_ALL);
   curlhandle = curl_easy_init();
 
-  upload(curlhandle, "ftp://user:pass@host/path/file", "C:\\file", 0, 3);
+  upload(curlhandle, "ftp://user:pass@example.com/path/file", "C:\\file", 0, 3);
 
   curl_easy_cleanup(curlhandle);
   curl_global_cleanup();

docs/examples/getinfo.c

@@ -19,7 +19,7 @@ int main(void)
   curl = curl_easy_init();
   if(curl) {
     /* http://curl.haxx.se/libcurl/c/curl_easy_setopt.html#CURLOPTURL */
-    curl_easy_setopt(curl, CURLOPT_URL, "curl.haxx.se");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://www.example.com/");
     /* http://curl.haxx.se/libcurl/c/curl_easy_perform.html */
     res = curl_easy_perform(curl);
 

docs/examples/getinmemory.c

@@ -8,8 +8,6 @@
  *
  * Example source code to show how the callback function can be used to
  * download data into a chunk of memory instead of storing it in a file.
- *
- * This exact source code has not been verified to work.
  */
 
 #include <stdio.h>
@@ -17,25 +15,12 @@
 #include <string.h>
 
 #include <curl/curl.h>
-#include <curl/types.h>
-#include <curl/easy.h>
 
 struct MemoryStruct {
   char *memory;
   size_t size;
 };
 
-static void *myrealloc(void *ptr, size_t size);
-
-static void *myrealloc(void *ptr, size_t size)
-{
-  /* There might be a realloc() out there that doesn't like reallocing
-     NULL pointers, so we take care of it here */
-  if(ptr)
-    return realloc(ptr, size);
-  else
-    return malloc(size);
-}
 
 static size_t
 WriteMemoryCallback(void *ptr, size_t size, size_t nmemb, void *data)
@@ -43,22 +28,28 @@ WriteMemoryCallback(void *ptr, size_t size, size_t nmemb, void *data)
   size_t realsize = size * nmemb;
   struct MemoryStruct *mem = (struct MemoryStruct *)data;
 
-  mem->memory = myrealloc(mem->memory, mem->size + realsize + 1);
-  if (mem->memory) {
+  mem->memory = realloc(mem->memory, mem->size + realsize + 1);
+  if (mem->memory == NULL) {
+    /* out of memory! */
+    printf("not enough memory (realloc returned NULL)\n");
+    exit(EXIT_FAILURE);
+  }
+
   memcpy(&(mem->memory[mem->size]), ptr, realsize);
   mem->size += realsize;
   mem->memory[mem->size] = 0;
-  }
+
   return realsize;
 }
 
+
 int main(int argc, char **argv)
 {
   CURL *curl_handle;
 
   struct MemoryStruct chunk;
 
-  chunk.memory=NULL; /* we expect realloc(NULL, size) to work */
+  chunk.memory = malloc(1);  /* will be grown as needed by the realloc above */
   chunk.size = 0;    /* no data at this point */
 
   curl_global_init(CURL_GLOBAL_ALL);
@@ -67,7 +58,7 @@ int main(int argc, char **argv)
   curl_handle = curl_easy_init();
 
   /* specify URL to get */
-  curl_easy_setopt(curl_handle, CURLOPT_URL, "http://cool.haxx.se/");
+  curl_easy_setopt(curl_handle, CURLOPT_URL, "http://www.example.com/");
 
   /* send all data to this function  */
   curl_easy_setopt(curl_handle, CURLOPT_WRITEFUNCTION, WriteMemoryCallback);
@@ -96,6 +87,8 @@ int main(int argc, char **argv)
    * you're done with it, you should free() it as a nice application.
    */
 
+  printf("%lu bytes retrieved\n", chunk.size);
+
   if(chunk.memory)
     free(chunk.memory);
 

docs/examples/ghiper.c

@@ -58,10 +58,7 @@ callback.
 typedef struct _GlobalInfo {
   CURLM *multi;
   guint timer_event;
-  int prev_running;
   int still_running;
-  int requested; /* count: curl_easy_init() */
-  int completed; /* count: curl_easy_cleanup() */
 } GlobalInfo;
 
 
@@ -95,7 +92,6 @@ static void mcode_or_die(const char *where, CURLMcode code) {
     const char *s;
     switch (code) {
       case     CURLM_CALL_MULTI_PERFORM: s="CURLM_CALL_MULTI_PERFORM"; break;
-      case     CURLM_OK:                 s="CURLM_OK";                 break;
       case     CURLM_BAD_HANDLE:         s="CURLM_BAD_HANDLE";         break;
       case     CURLM_BAD_EASY_HANDLE:    s="CURLM_BAD_EASY_HANDLE";    break;
       case     CURLM_OUT_OF_MEMORY:      s="CURLM_OUT_OF_MEMORY";      break;
@@ -113,62 +109,43 @@ static void mcode_or_die(const char *where, CURLMcode code) {
 
 
 /* Check for completed transfers, and remove their easy handles */
-static void check_run_count(GlobalInfo *g)
+static void check_multi_info(GlobalInfo *g)
 {
-  if (g->prev_running > g->still_running) {
-    char *eff_url=NULL;
+  char *eff_url;
   CURLMsg *msg;
   int msgs_left;
-    ConnInfo *conn=NULL;
-    CURL*easy;
+  ConnInfo *conn;
+  CURL *easy;
   CURLcode res;
 
   MSG_OUT("REMAINING: %d\n", g->still_running);
-    /*
-      I am still uncertain whether it is safe to remove an easy handle
-      from inside the curl_multi_info_read loop, so here I will search
-      for completed transfers in the inner "while" loop, and then remove
-      them in the outer "do-while" loop...
-   */
-    do {
-      easy=NULL;
   while ((msg = curl_multi_info_read(g->multi, &msgs_left))) {
     if (msg->msg == CURLMSG_DONE) {
-          easy=msg->easy_handle;
-          res=msg->data.result;
-          break;
-        }
-      }
-      if (easy) {
+      easy = msg->easy_handle;
+      res = msg->data.result;
       curl_easy_getinfo(easy, CURLINFO_PRIVATE, &conn);
       curl_easy_getinfo(easy, CURLINFO_EFFECTIVE_URL, &eff_url);
       MSG_OUT("DONE: %s => (%d) %s\n", eff_url, res, conn->error);
       curl_multi_remove_handle(g->multi, easy);
-          g_free(conn->url);
+      free(conn->url);
       curl_easy_cleanup(easy);
-          g_free(conn);
-          g->completed++;
+      free(conn);
     }
-    } while ( easy );
-    MSG_OUT("Requested: %d Completed:%d\n", g->requested, g->completed);
   }
-  g->prev_running = g->still_running;
 }
 
 
 
-
 /* Called by glib when our timeout expires */
 static gboolean timer_cb(gpointer data)
 {
   GlobalInfo *g = (GlobalInfo *)data;
   CURLMcode rc;
 
-  do {
-    rc = curl_multi_socket(g->multi, CURL_SOCKET_TIMEOUT, &g->still_running);
-  } while (rc == CURLM_CALL_MULTI_PERFORM);
-  mcode_or_die("timer_cb: curl_multi_socket", rc);
-  check_run_count(g);
+  rc = curl_multi_socket_action(g->multi,
+                                  CURL_SOCKET_TIMEOUT, 0, &g->still_running);
+  mcode_or_die("timer_cb: curl_multi_socket_action", rc);
+  check_multi_info(g);
   return FALSE;
 }
 
@@ -198,11 +175,15 @@ static gboolean event_cb(GIOChannel *ch, GIOCondition condition, gpointer data)
   GlobalInfo *g = (GlobalInfo*) data;
   CURLMcode rc;
   int fd=g_io_channel_unix_get_fd(ch);
-  do {
-    rc = curl_multi_socket(g->multi, fd, &g->still_running);
-  } while (rc == CURLM_CALL_MULTI_PERFORM);
-  mcode_or_die("event_cb: curl_multi_socket", rc);
-  check_run_count(g);
+
+  int action =
+    (condition & G_IO_IN ? CURL_CSELECT_IN : 0) |
+    (condition & G_IO_OUT ? CURL_CSELECT_OUT : 0);
+
+  rc = curl_multi_socket_action(g->multi, fd, action, &g->still_running);
+  mcode_or_die("event_cb: curl_multi_socket_action", rc);
+
+  check_multi_info(g);
   if(g->still_running) {
     return TRUE;
   } else {
@@ -338,12 +319,9 @@ static void new_conn(char *url, GlobalInfo *g )
   MSG_OUT("Adding easy %p to multi %p (%s)\n", conn->easy, g->multi, url);
   rc =curl_multi_add_handle(g->multi, conn->easy);
   mcode_or_die("new_conn: curl_multi_add_handle", rc);
-  g->requested++;
-  do {
-    rc = curl_multi_socket_all(g->multi, &g->still_running);
-  } while (CURLM_CALL_MULTI_PERFORM == rc);
-  mcode_or_die("new_conn: curl_multi_socket_all", rc);
-  check_run_count(g);
+
+  /* note that the add_handle() will set a time-out to trigger very soon so
+     that the necessary socket_action() call will be called by this app */
 }
 
 
@@ -451,9 +429,10 @@ int main(int argc, char **argv)
   curl_multi_setopt(g->multi, CURLMOPT_SOCKETDATA, g);
   curl_multi_setopt(g->multi, CURLMOPT_TIMERFUNCTION, update_timeout_cb);
   curl_multi_setopt(g->multi, CURLMOPT_TIMERDATA, g);
-  do {
-    rc = curl_multi_socket_all(g->multi, &g->still_running);
-  } while (CURLM_CALL_MULTI_PERFORM == rc);
+
+  /* we don't call any curl_multi_socket*() function yet as we have no handles
+     added! */
+
   g_main_loop_run(gmain);
   curl_multi_cleanup(g->multi);
   return 0;

docs/examples/hiperfifo.c

@@ -62,7 +62,6 @@ typedef struct _GlobalInfo {
   struct event fifo_event;
   struct event timer_event;
   CURLM *multi;
-  int prev_running;
   int still_running;
   FILE* input;
 } GlobalInfo;
@@ -110,7 +109,6 @@ static void mcode_or_die(const char *where, CURLMcode code)
     const char *s;
     switch (code) {
       case     CURLM_CALL_MULTI_PERFORM: s="CURLM_CALL_MULTI_PERFORM"; break;
-      case     CURLM_OK:                 s="CURLM_OK";                 break;
       case     CURLM_BAD_HANDLE:         s="CURLM_BAD_HANDLE";         break;
       case     CURLM_BAD_EASY_HANDLE:    s="CURLM_BAD_EASY_HANDLE";    break;
       case     CURLM_OUT_OF_MEMORY:      s="CURLM_OUT_OF_MEMORY";      break;
@@ -132,33 +130,20 @@ static void mcode_or_die(const char *where, CURLMcode code)
 
 
 /* Check for completed transfers, and remove their easy handles */
-static void check_run_count(GlobalInfo *g)
+static void check_multi_info(GlobalInfo *g)
 {
-  if (g->prev_running > g->still_running) {
-    char *eff_url=NULL;
+  char *eff_url;
   CURLMsg *msg;
   int msgs_left;
-    ConnInfo *conn=NULL;
-    CURL*easy;
+  ConnInfo *conn;
+  CURL *easy;
   CURLcode res;
 
   fprintf(MSG_OUT, "REMAINING: %d\n", g->still_running);
-    /*
-      I am still uncertain whether it is safe to remove an easy handle
-      from inside the curl_multi_info_read loop, so here I will search
-      for completed transfers in the inner "while" loop, and then remove
-      them in the outer "do-while" loop...
-   */
-    do {
-      easy=NULL;
   while ((msg = curl_multi_info_read(g->multi, &msgs_left))) {
     if (msg->msg == CURLMSG_DONE) {
-          easy=msg->easy_handle;
-          res=msg->data.result;
-          break;
-        }
-      }
-      if (easy) {
+      easy = msg->easy_handle;
+      res = msg->data.result;
       curl_easy_getinfo(easy, CURLINFO_PRIVATE, &conn);
       curl_easy_getinfo(easy, CURLINFO_EFFECTIVE_URL, &eff_url);
       fprintf(MSG_OUT, "DONE: %s => (%d) %s\n", eff_url, res, conn->error);
@@ -167,9 +152,7 @@ static void check_run_count(GlobalInfo *g)
       curl_easy_cleanup(easy);
       free(conn);
     }
-    } while ( easy );
   }
-  g->prev_running = g->still_running;
 }
 
 
@@ -181,16 +164,13 @@ static void event_cb(int fd, short kind, void *userp)
   CURLMcode rc;
 
   int action =
-    (kind&EV_READ?CURL_CSELECT_IN:0)|
-    (kind&EV_WRITE?CURL_CSELECT_OUT:0);
+    (kind & EV_READ ? CURL_CSELECT_IN : 0) |
+    (kind & EV_WRITE ? CURL_CSELECT_OUT : 0);
 
-  do {
   rc = curl_multi_socket_action(g->multi, fd, action, &g->still_running);
-  } while (rc == CURLM_CALL_MULTI_PERFORM);
-
   mcode_or_die("event_cb: curl_multi_socket_action", rc);
 
-  check_run_count(g);
+  check_multi_info(g);
   if ( g->still_running <= 0 ) {
     fprintf(MSG_OUT, "last transfer done, kill timeout\n");
     if (evtimer_pending(&g->timer_event, NULL)) {
@@ -209,12 +189,10 @@ static void timer_cb(int fd, short kind, void *userp)
   (void)fd;
   (void)kind;
 
-  do {
   rc = curl_multi_socket_action(g->multi,
                                   CURL_SOCKET_TIMEOUT, 0, &g->still_running);
-  } while (rc == CURLM_CALL_MULTI_PERFORM);
   mcode_or_die("timer_cb: curl_multi_socket_action", rc);
-  check_run_count(g);
+  check_multi_info(g);
 }
 
 
@@ -340,7 +318,7 @@ static void new_conn(char *url, GlobalInfo *g )
   curl_easy_setopt(conn->easy, CURLOPT_PROGRESSDATA, conn);
   fprintf(MSG_OUT,
           "Adding easy %p to multi %p (%s)\n", conn->easy, g->multi, url);
-  rc =curl_multi_add_handle(g->multi, conn->easy);
+  rc = curl_multi_add_handle(g->multi, conn->easy);
   mcode_or_die("new_conn: curl_multi_add_handle", rc);
 
   /* note that the add_handle() will set a time-out to trigger very soon so

docs/examples/https.c

@@ -17,7 +17,7 @@ int main(void)
 
   curl = curl_easy_init();
   if(curl) {
-    curl_easy_setopt(curl, CURLOPT_URL, "https://sourceforge.net/");
+    curl_easy_setopt(curl, CURLOPT_URL, "https://example.com/");
 
 #ifdef SKIP_PEER_VERIFICATION
     /*

docs/examples/multi-app.c

@@ -43,9 +43,9 @@ int main(int argc, char **argv)
       handles[i] = curl_easy_init();
 
   /* set the options (I left out a few, you'll get the point anyway) */
-  curl_easy_setopt(handles[HTTP_HANDLE], CURLOPT_URL, "http://website.com");
+  curl_easy_setopt(handles[HTTP_HANDLE], CURLOPT_URL, "http://example.com");
 
-  curl_easy_setopt(handles[FTP_HANDLE], CURLOPT_URL, "ftp://ftpsite.com");
+  curl_easy_setopt(handles[FTP_HANDLE], CURLOPT_URL, "ftp://example.com");
   curl_easy_setopt(handles[FTP_HANDLE], CURLOPT_UPLOAD, 1L);
 
   /* init a multi stack */
@@ -56,8 +56,7 @@ int main(int argc, char **argv)
       curl_multi_add_handle(multi_handle, handles[i]);
 
   /* we start some action by calling perform right away */
-  while(CURLM_CALL_MULTI_PERFORM ==
-        curl_multi_perform(multi_handle, &still_running));
+  curl_multi_perform(multi_handle, &still_running);
 
   while(still_running) {
     struct timeval timeout;
@@ -66,7 +65,9 @@ int main(int argc, char **argv)
     fd_set fdread;
     fd_set fdwrite;
     fd_set fdexcep;
-    int maxfd;
+    int maxfd = -1;
+
+    long curl_timeo = -1;
 
     FD_ZERO(&fdread);
     FD_ZERO(&fdwrite);
@@ -76,12 +77,23 @@ int main(int argc, char **argv)
     timeout.tv_sec = 1;
     timeout.tv_usec = 0;
 
+    curl_multi_timeout(multi_handle, &curl_timeo);
+    if(curl_timeo >= 0) {
+      timeout.tv_sec = curl_timeo / 1000;
+      if(timeout.tv_sec > 1)
+        timeout.tv_sec = 1;
+      else
+        timeout.tv_usec = (curl_timeo % 1000) * 1000;
+    }
+
     /* get file descriptors from the transfers */
     curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
     /* In a real-world program you OF COURSE check the return code of the
-       function calls, *and* you make sure that maxfd is bigger than -1 so
-       that the call to select() below makes sense! */
+       function calls.  On success, the value of maxfd is guaranteed to be
+       greater or equal than -1.  We call select(maxfd + 1, ...), specially in
+       case of (maxfd == -1), we call select(0, ...), which is basically equal
+       to sleep. */
 
     rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 
@@ -95,8 +107,7 @@ int main(int argc, char **argv)
     default:
       /* one or more of curl's file descriptors say there's data to read
          or write */
-      while(CURLM_CALL_MULTI_PERFORM ==
-            curl_multi_perform(multi_handle, &still_running));
+      curl_multi_perform(multi_handle, &still_running);
       break;
     }
   }

docs/examples/multi-debugcallback.c

@@ -118,7 +118,7 @@ int main(int argc, char **argv)
   http_handle = curl_easy_init();
 
   /* set the options (I left out a few, you'll get the point anyway) */
-  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.haxx.se/");
+  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.example.com/");
 
   curl_easy_setopt(http_handle, CURLOPT_DEBUGFUNCTION, my_trace);
   curl_easy_setopt(http_handle, CURLOPT_VERBOSE, 1L);
@@ -130,8 +130,7 @@ int main(int argc, char **argv)
   curl_multi_add_handle(multi_handle, http_handle);
 
   /* we start some action by calling perform right away */
-  while(CURLM_CALL_MULTI_PERFORM ==
-        curl_multi_perform(multi_handle, &still_running));
+  curl_multi_perform(multi_handle, &still_running);
 
   while(still_running) {
     struct timeval timeout;
@@ -140,7 +139,9 @@ int main(int argc, char **argv)
     fd_set fdread;
     fd_set fdwrite;
     fd_set fdexcep;
-    int maxfd;
+    int maxfd = -1;
+
+    long curl_timeo = -1;
 
     FD_ZERO(&fdread);
     FD_ZERO(&fdwrite);
@@ -150,12 +151,23 @@ int main(int argc, char **argv)
     timeout.tv_sec = 1;
     timeout.tv_usec = 0;
 
+    curl_multi_timeout(multi_handle, &curl_timeo);
+    if(curl_timeo >= 0) {
+      timeout.tv_sec = curl_timeo / 1000;
+      if(timeout.tv_sec > 1)
+        timeout.tv_sec = 1;
+      else
+        timeout.tv_usec = (curl_timeo % 1000) * 1000;
+    }
+
     /* get file descriptors from the transfers */
     curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
     /* In a real-world program you OF COURSE check the return code of the
-       function calls, *and* you make sure that maxfd is bigger than -1
-       so that the call to select() below makes sense! */
+       function calls.  On success, the value of maxfd is guaranteed to be
+       greater or equal than -1.  We call select(maxfd + 1, ...), specially in
+       case of (maxfd == -1), we call select(0, ...), which is basically equal
+       to sleep. */
 
     rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 
@@ -168,8 +180,7 @@ int main(int argc, char **argv)
     case 0:
     default:
       /* timeout or readable/writable sockets */
-      while(CURLM_CALL_MULTI_PERFORM ==
-            curl_multi_perform(multi_handle, &still_running));
+      curl_multi_perform(multi_handle, &still_running);
       break;
     }
   }

docs/examples/multi-double.c

@@ -34,7 +34,7 @@ int main(int argc, char **argv)
   http_handle2 = curl_easy_init();
 
   /* set options */
-  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.haxx.se/");
+  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.example.com/");
 
   /* set options */
   curl_easy_setopt(http_handle2, CURLOPT_URL, "http://localhost/");
@@ -47,8 +47,7 @@ int main(int argc, char **argv)
   curl_multi_add_handle(multi_handle, http_handle2);
 
   /* we start some action by calling perform right away */
-  while(CURLM_CALL_MULTI_PERFORM ==
-        curl_multi_perform(multi_handle, &still_running));
+  curl_multi_perform(multi_handle, &still_running);
 
   while(still_running) {
     struct timeval timeout;
@@ -57,7 +56,9 @@ int main(int argc, char **argv)
     fd_set fdread;
     fd_set fdwrite;
     fd_set fdexcep;
-    int maxfd;
+    int maxfd = -1;
+
+    long curl_timeo = -1;
 
     FD_ZERO(&fdread);
     FD_ZERO(&fdwrite);
@@ -67,12 +68,23 @@ int main(int argc, char **argv)
     timeout.tv_sec = 1;
     timeout.tv_usec = 0;
 
+    curl_multi_timeout(multi_handle, &curl_timeo);
+    if(curl_timeo >= 0) {
+      timeout.tv_sec = curl_timeo / 1000;
+      if(timeout.tv_sec > 1)
+        timeout.tv_sec = 1;
+      else
+        timeout.tv_usec = (curl_timeo % 1000) * 1000;
+    }
+
     /* get file descriptors from the transfers */
     curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
     /* In a real-world program you OF COURSE check the return code of the
-       function calls, *and* you make sure that maxfd is bigger than -1 so
-       that the call to select() below makes sense! */
+       function calls.  On success, the value of maxfd is guaranteed to be
+       greater or equal than -1.  We call select(maxfd + 1, ...), specially in
+       case of (maxfd == -1), we call select(0, ...), which is basically equal
+       to sleep. */
 
     rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 
@@ -83,8 +95,7 @@ int main(int argc, char **argv)
     case 0:
     default:
       /* timeout or readable/writable sockets */
-      while(CURLM_CALL_MULTI_PERFORM ==
-            curl_multi_perform(multi_handle, &still_running));
+      curl_multi_perform(multi_handle, &still_running);
       break;
     }
   }

docs/examples/multi-post.c

@@ -58,8 +58,7 @@ int main(int argc, char *argv[])
   if(curl && multi_handle) {
 
     /* what URL that receives this POST */
-    curl_easy_setopt(curl, CURLOPT_URL,
-                     "http://www.fillinyoururl.com/upload.cgi");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://www.example.com/upload.cgi");
     curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);
 
     curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headerlist);
@@ -67,8 +66,7 @@ int main(int argc, char *argv[])
 
     curl_multi_add_handle(multi_handle, curl);
 
-    while(CURLM_CALL_MULTI_PERFORM ==
-          curl_multi_perform(multi_handle, &still_running));
+    curl_multi_perform(multi_handle, &still_running);
 
     while(still_running) {
       struct timeval timeout;
@@ -77,7 +75,9 @@ int main(int argc, char *argv[])
       fd_set fdread;
       fd_set fdwrite;
       fd_set fdexcep;
-      int maxfd;
+      int maxfd = -1;
+
+      long curl_timeo = -1;
 
       FD_ZERO(&fdread);
       FD_ZERO(&fdwrite);
@@ -87,12 +87,23 @@ int main(int argc, char *argv[])
       timeout.tv_sec = 1;
       timeout.tv_usec = 0;
 
+      curl_multi_timeout(multi_handle, &curl_timeo);
+      if(curl_timeo >= 0) {
+        timeout.tv_sec = curl_timeo / 1000;
+        if(timeout.tv_sec > 1)
+          timeout.tv_sec = 1;
+        else
+          timeout.tv_usec = (curl_timeo % 1000) * 1000;
+      }
+
       /* get file descriptors from the transfers */
       curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
       /* In a real-world program you OF COURSE check the return code of the
-         function calls, *and* you make sure that maxfd is bigger than -1
-         so that the call to select() below makes sense! */
+         function calls.  On success, the value of maxfd is guaranteed to be
+         greater or equal than -1.  We call select(maxfd + 1, ...), specially in
+         case of (maxfd == -1), we call select(0, ...), which is basically equal
+         to sleep. */
 
       rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 
@@ -105,8 +116,7 @@ int main(int argc, char *argv[])
       default:
         /* timeout or readable/writable sockets */
         printf("perform!\n");
-        while(CURLM_CALL_MULTI_PERFORM ==
-              curl_multi_perform(multi_handle, &still_running));
+        curl_multi_perform(multi_handle, &still_running);
         printf("running: %d!\n", still_running);
         break;
       }

docs/examples/multi-single.c

@@ -32,7 +32,7 @@ int main(int argc, char **argv)
   http_handle = curl_easy_init();
 
   /* set the options (I left out a few, you'll get the point anyway) */
-  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.haxx.se/");
+  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.example.com/");
 
   /* init a multi stack */
   multi_handle = curl_multi_init();
@@ -41,8 +41,7 @@ int main(int argc, char **argv)
   curl_multi_add_handle(multi_handle, http_handle);
 
   /* we start some action by calling perform right away */
-  while(CURLM_CALL_MULTI_PERFORM ==
-        curl_multi_perform(multi_handle, &still_running));
+  curl_multi_perform(multi_handle, &still_running);
 
   while(still_running) {
     struct timeval timeout;
@@ -51,7 +50,9 @@ int main(int argc, char **argv)
     fd_set fdread;
     fd_set fdwrite;
     fd_set fdexcep;
-    int maxfd;
+    int maxfd = -1;
+
+    long curl_timeo = -1;
 
     FD_ZERO(&fdread);
     FD_ZERO(&fdwrite);
@@ -61,12 +62,23 @@ int main(int argc, char **argv)
     timeout.tv_sec = 1;
     timeout.tv_usec = 0;
 
+    curl_multi_timeout(multi_handle, &curl_timeo);
+    if(curl_timeo >= 0) {
+      timeout.tv_sec = curl_timeo / 1000;
+      if(timeout.tv_sec > 1)
+        timeout.tv_sec = 1;
+      else
+        timeout.tv_usec = (curl_timeo % 1000) * 1000;
+    }
+
     /* get file descriptors from the transfers */
     curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
     /* In a real-world program you OF COURSE check the return code of the
-       function calls, *and* you make sure that maxfd is bigger than -1 so
-       that the call to select() below makes sense! */
+       function calls.  On success, the value of maxfd is guaranteed to be
+       greater or equal than -1.  We call select(maxfd + 1, ...), specially in
+       case of (maxfd == -1), we call select(0, ...), which is basically equal
+       to sleep. */
 
     rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 
@@ -79,8 +91,7 @@ int main(int argc, char **argv)
     case 0:
     default:
       /* timeout or readable/writable sockets */
-      while(CURLM_CALL_MULTI_PERFORM ==
-            curl_multi_perform(multi_handle, &still_running));
+      curl_multi_perform(multi_handle, &still_running);
       break;
     }
   }

docs/examples/persistant.c

@@ -24,12 +24,12 @@ int main(int argc, char **argv)
     curl_easy_setopt(curl, CURLOPT_HEADER, 1L);
 
     /* get the first document */
-    curl_easy_setopt(curl, CURLOPT_URL, "http://curl.haxx.se/");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://example.com/");
     res = curl_easy_perform(curl);
 
     /* get another document from the same server using the same
        connection */
-    curl_easy_setopt(curl, CURLOPT_URL, "http://curl.haxx.se/docs/");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://example.com/docs/");
     res = curl_easy_perform(curl);
 
     /* always cleanup */

docs/examples/post-callback.c

@@ -51,8 +51,8 @@ int main(void)
   curl = curl_easy_init();
   if(curl) {
     /* First set the URL that is about to receive our POST. */
-    curl_easy_setopt(curl, CURLOPT_URL,
-                     "http://receivingsite.com.pooh/index.cgi");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://example.com/index.cgi");
+
     /* Now specify we want to POST data */
     curl_easy_setopt(curl, CURLOPT_POST, 1L);
 

docs/examples/postit2.c

@@ -67,7 +67,7 @@ int main(int argc, char *argv[])
   headerlist = curl_slist_append(headerlist, buf);
   if(curl) {
     /* what URL that receives this POST */
-    curl_easy_setopt(curl, CURLOPT_URL, "http://curl.haxx.se/examplepost.cgi");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://example.com/examplepost.cgi");
     if ( (argc == 2) && (!strcmp(argv[1], "noexpectheader")) )
       /* only disable 100-continue header if explicitly requested */
       curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headerlist);

docs/examples/sampleconv.c

@@ -75,7 +75,7 @@ int main(void)
 
   curl = curl_easy_init();
   if(curl) {
-    curl_easy_setopt(curl, CURLOPT_URL, "curl.haxx.se");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://example.com");
 
     /* use platform-specific functions for codeset conversions */
     curl_easy_setopt(curl, CURLOPT_CONV_FROM_NETWORK_FUNCTION,

docs/examples/sendrecv.c

@@ -48,13 +48,13 @@ int main(void)
   CURL *curl;
   CURLcode res;
   /* Minimalistic http request */
-  const char *request = "GET / HTTP/1.0\r\nHost: curl.haxx.se\r\n\r\n";
+  const char *request = "GET / HTTP/1.0\r\nHost: example.com\r\n\r\n";
   int sockfd; /* socket */
   size_t iolen;
 
   curl = curl_easy_init();
   if(curl) {
-    curl_easy_setopt(curl, CURLOPT_URL, "curl.haxx.se");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://example.com");
     /* Do not do the transfer - only connect to host */
     curl_easy_setopt(curl, CURLOPT_CONNECT_ONLY, 1L);
     res = curl_easy_perform(curl);

docs/examples/sepheaders.c

@@ -35,7 +35,7 @@ int main(int argc, char **argv)
   curl_handle = curl_easy_init();
 
   /* set URL to get */
-  curl_easy_setopt(curl_handle, CURLOPT_URL, "http://curl.haxx.se");
+  curl_easy_setopt(curl_handle, CURLOPT_URL, "http://example.com");
 
   /* no progress meter please */
   curl_easy_setopt(curl_handle, CURLOPT_NOPROGRESS, 1L);

docs/examples/simple.c

@@ -17,7 +17,7 @@ int main(void)
 
   curl = curl_easy_init();
   if(curl) {
-    curl_easy_setopt(curl, CURLOPT_URL, "curl.haxx.se");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://example.com");
     res = curl_easy_perform(curl);
 
     /* always cleanup */

docs/examples/simplepost.c

@@ -20,7 +20,7 @@ int main(void)
 
   curl = curl_easy_init();
   if(curl) {
-    curl_easy_setopt(curl, CURLOPT_URL, "http://posthere.com");
+    curl_easy_setopt(curl, CURLOPT_URL, "http://example.com");
     curl_easy_setopt(curl, CURLOPT_POSTFIELDS, postthis);
 
     /* if we don't provide POSTFIELDSIZE, libcurl will strlen() by

docs/examples/threaded-ssl.c

@@ -91,10 +91,10 @@ void init_locks(void)
 
 /* List of URLs to fetch.*/
 const char * const urls[]= {
-  "https://www.sf.net/",
-  "https://www.openssl.org/",
-  "https://www.sf.net/",
-  "https://www.openssl.org/",
+  "https://www.example.com/",
+  "https://www2.example.com/",
+  "https://www3.example.com/",
+  "https://www4.example.com/",
 };
 
 static void *pull_one_url(void *url)

docs/libcurl/.gitignore

@@ -0,0 +1,2 @@
+*.html
+*.pdf

docs/libcurl/curl_easy_getinfo.3

@@ -173,6 +173,17 @@ string holding the IP address of the most recent connection done with this
 \fBcurl\fP handle. This string may be IPv6 if that's enabled. Note that you
 get a pointer to a memory area that will be re-used at next request so you
 need to copy the string if you want to keep the information. (Added in 7.19.0)
+.IP CURLINFO_PRIMARY_PORT
+Pass a pointer to a long to receive the destination port of the most recent
+connection done with this \fBcurl\fP handle. (Added in 7.21.0)
+.IP CURLINFO_LOCAL_IP
+Pass a pointer to a char pointer to receive the pointer to a zero-terminated
+string holding the local (source) IP address of the most recent connection done
+with this \fBcurl\fP handle. This string may be IPv6 if that's enabled. The
+same restrictions apply as to \fICURLINFO_PRIMARY_IP\fP. (Added in 7.21.0)
+.IP CURLINFO_LOCAL_PORT
+Pass a pointer to a long to receive the local (source) port of the most recent
+connection done with this \fBcurl\fP handle. (Added in 7.21.0)
 .IP CURLINFO_COOKIELIST
 Pass a pointer to a 'struct curl_slist *' to receive a linked-list of all
 cookies cURL knows (expired ones, too). Don't forget to
@@ -187,6 +198,9 @@ working with the socket, you must call curl_easy_cleanup() as usual and let
 libcurl close the socket and cleanup other resources associated with the
 handle. This is typically used in combination with \fICURLOPT_CONNECT_ONLY\fP.
 (Added in 7.15.2)
+
+NOTE: this API is not really working on win64, since the SOCKET type on win64
+is 64 bit large while its 'long' is only 32 bits.
 .IP CURLINFO_FTP_ENTRY_PATH
 Pass a pointer to a char pointer to receive a pointer to a string holding the
 path of the entry path. That is the initial path libcurl ended up in when

docs/libcurl/curl_easy_setopt.3

@@ -84,11 +84,61 @@ If this option is set and libcurl has been built with the standard name
 resolver, timeouts will not occur while the name resolve takes place.
 Consider building libcurl with c-ares support to enable asynchronous DNS
 lookups, which enables nice timeouts for name resolves without signals.
+.IP CURLOPT_WILDCARDMATCH
+Set this option to 1 if you want to transfer multiple files according to a
+file name pattern. The pattern can be specified as part of the
+\fICURLOPT_URL\fP option, using an fnmatch-like pattern (Shell Pattern
+Matching) in the last part of URL (file name).
+
+By default, libcurl uses its internal wildcard matching implementation. You
+can provide your own matching function by the \fICURLOPT_FNMATCH_FUNCTION\fP
+option.
+
+This feature is only supported by the FTP download for now.
+
+A brief introduction of its syntax follows:
+.RS
+.IP "\fB*\fP - ASTERISK"
+\&ftp://example.com/some/path/\fB*.txt\fP (for all txt's from the root
+directory)
+.RE
+.RS
+.IP "\fB?\fP - QUESTION MARK"
+Question mark matches any (exactly one) character.
+
+\&ftp://example.com/some/path/\fBphoto?.jpeg\fP
+.RE
+.RS
+.IP "\fB[\fP - BRACKET EXPRESSION"
+The left bracket opens a bracket expression. The question mark and asterisk have
+no special meaning in a bracket expression. Each bracket expression ends by the
+right bracket and matches exactly one character. Some examples follow:
+
+\fB[a-zA-Z0\-9]\fP or \fB[f\-gF\-G]\fP \- character interval
+
+\fB[abc]\fP - character enumeration
+
+\fB[^abc]\fP or \fB[!abc]\fP - negation
+
+\fB[[:\fP\fIname\fP\fB:]]\fP class expression. Supported classes are
+\fBalnum\fP,\fBlower\fP, \fBspace\fP, \fBalpha\fP, \fBdigit\fP, \fBprint\fP,
+\fBupper\fP, \fBblank\fP, \fBgraph\fP, \fBxdigit\fP.
+
+\fB[][-!^]\fP - special case \- matches only '\-', ']', '[', '!' or '^'. These
+characters have no special purpose.
+
+\fB[\\[\\]\\\\]\fP - escape syntax. Matches '[', ']' or '\\'.
+
+Using the rules above, a file name pattern can be constructed:
+
+\&ftp://example.com/some/path/\fB[a-z[:upper:]\\\\].jpeg\fP
+.RE
 .PP
+(This was added in 7.21.0)
 .SH CALLBACK OPTIONS
 .IP CURLOPT_WRITEFUNCTION
 Function pointer that should match the following prototype: \fBsize_t
-function( void *ptr, size_t size, size_t nmemb, void *stream);\fP This
+function( void *ptr, size_t size, size_t nmemb, void *userdata);\fP This
 function gets called by libcurl as soon as there is data received that needs
 to be saved. The size of the data pointed to by \fIptr\fP is \fIsize\fP
 multiplied with \fInmemb\fP, it will not be zero terminated. Return the number
@@ -107,7 +157,7 @@ Set this option to NULL to get the internal default function. The internal
 default function will write the data to the FILE * given with
 \fICURLOPT_WRITEDATA\fP.
 
-Set the \fIstream\fP argument with the \fICURLOPT_WRITEDATA\fP option.
+Set the \fIuserdata\fP argument with the \fICURLOPT_WRITEDATA\fP option.
 
 The callback function will be passed as much data as possible in all invokes,
 but you cannot possibly make any assumptions. It may be one byte, it may be
@@ -130,7 +180,7 @@ This option is also known with the older name \fICURLOPT_FILE\fP, the name
 \fICURLOPT_WRITEDATA\fP was introduced in 7.9.7.
 .IP CURLOPT_READFUNCTION
 Function pointer that should match the following prototype: \fBsize_t
-function( void *ptr, size_t size, size_t nmemb, void *stream);\fP This
+function( void *ptr, size_t size, size_t nmemb, void *userdata);\fP This
 function gets called by libcurl as soon as it needs to read data in order to
 send it to the peer. The data area pointed at by the pointer \fIptr\fP may be
 filled with at most \fIsize\fP multiplied with \fInmemb\fP number of
@@ -151,9 +201,9 @@ From 7.18.0, the function can return CURL_READFUNC_PAUSE which then will cause
 reading from this connection to become paused. See \fIcurl_easy_pause(3)\fP
 for further details.
 
-If you set the callback pointer to NULL, or don't set it at all, the default
-internal read function will be used. It is simply doing an fread() on the FILE
-* stream set with \fICURLOPT_READDATA\fP.
+If you set this callback pointer to NULL, or don't set it at all, the default
+internal read function will be used. It is doing an fread() on the FILE *
+userdata set with \fICURLOPT_READDATA\fP.
 .IP CURLOPT_READDATA
 Data pointer to pass to the file read function. If you use the
 \fICURLOPT_READFUNCTION\fP option, this is the pointer you'll get as input. If
@@ -246,11 +296,11 @@ argument in the opensocket callback set with \fICURLOPT_OPENSOCKETFUNCTION\fP.
 Function pointer that should match the \fIcurl_progress_callback\fP prototype
 found in \fI<curl/curl.h>\fP. This function gets called by libcurl instead of
 its internal equivalent with a frequent interval during operation (roughly
-once per second) no matter if data is being transfered or not.  Unknown/unused
-argument values passed to the callback will be set to zero (like if you only
-download data, the upload size will remain 0). Returning a non-zero value from
-this callback will cause libcurl to abort the transfer and return
-\fICURLE_ABORTED_BY_CALLBACK\fP.
+once per second or sooner) no matter if data is being transfered or not.
+Unknown/unused argument values passed to the callback will be set to zero
+(like if you only download data, the upload size will remain 0). Returning a
+non-zero value from this callback will cause libcurl to abort the transfer and
+return \fICURLE_ABORTED_BY_CALLBACK\fP.
 
 If you transfer data with the multi interface, this function will not be
 called during periods of idleness unless you call the appropriate libcurl
@@ -263,13 +313,13 @@ Pass a pointer that will be untouched by libcurl and passed as the first
 argument in the progress callback set with \fICURLOPT_PROGRESSFUNCTION\fP.
 .IP CURLOPT_HEADERFUNCTION
 Function pointer that should match the following prototype: \fIsize_t
-function( void *ptr, size_t size, size_t nmemb, void *stream);\fP. This
+function( void *ptr, size_t size, size_t nmemb, void *userdata);\fP. This
 function gets called by libcurl as soon as it has received header data. The
 header callback will be called once for each header and only complete header
 lines are passed on to the callback. Parsing headers should be easy enough
 using this. The size of the data pointed to by \fIptr\fP is \fIsize\fP
 multiplied with \fInmemb\fP. Do not assume that the header line is zero
-terminated! The pointer named \fIstream\fP is the one you set with the
+terminated! The pointer named \fIuserdata\fP is the one you set with the
 \fICURLOPT_WRITEHEADER\fP option. The callback function must return the number
 of bytes actually taken care of. If that amount differs from the amount passed
 to your function, it'll signal an error to the library. This will abort the
@@ -402,7 +452,7 @@ You will need to override these definitions if they are different on your
 system.
 .IP CURLOPT_INTERLEAVEFUNCTION
 Function pointer that should match the following prototype: \fIsize_t
-function( void *ptr, size_t size, size_t nmemb, void *stream)\fP. This
+function( void *ptr, size_t size, size_t nmemb, void *userdata)\fP. This
 function gets called by libcurl as soon as it has received interleaved RTP
 data. This function gets called for each $ block and therefore contains
 exactly one upper-layer protocol unit (e.g.  one RTP packet). Curl writes the
@@ -422,8 +472,52 @@ request, (e.g.  \fICURL_RTSPREQ_PAUSE\fP) then the response handler will
 process any pending RTP data before marking the request as finished.  (Added
 in 7.20.0)
 .IP CURLOPT_INTERLEAVEDATA
-This is the stream that will be passed to \fICURLOPT_INTERLEAVEFUNCTION\fP when
-interleaved RTP data is received. (Added in 7.20.0)
+This is the userdata pointer that will be passed to
+\fICURLOPT_INTERLEAVEFUNCTION\fP when interleaved RTP data is received. (Added
+in 7.20.0)
+.IP CURLOPT_CHUNK_BGN_FUNCTION
+Function pointer that should match the following prototype: \fBlong function
+(const void *transfer_info, void *ptr, int remains)\fP. This function gets
+called by libcurl before a part of the stream is going to be transferred (if
+the transfer supports chunks).
+
+This callback makes sense only when using the \fICURLOPT_WILDCARDMATCH\fP
+option for now.
+
+The target of transfer_info parameter is a "feature depended" structure. For
+the FTP wildcard download, the target is curl_fileinfo structure (see
+\fIcurl/curl.h\fP).  The parameter ptr is a pointer given by
+\fICURLOPT_CHUNK_DATA\fP. The parameter remains contains number of chunks
+remaining per the transfer. If the feature is not available, the parameter has
+zero value.
+
+Return \fICURL_CHUNK_BGN_FUNC_OK\fP if everything is fine,
+\fICURL_CHUNK_BGN_FUNC_SKIP\fP if you want to skip the concrete chunk or
+\fICURL_CHUNK_BGN_FUNC_FAIL\fP to tell libcurl to stop if some error occurred.
+(This was added in 7.21.0)
+.IP CURLOPT_CHUNK_END_FUNCTION
+Function pointer that should match the following prototype: \fBlong
+function(void *ptr)\fP. This function gets called by libcurl as soon as a part
+of the stream has been transferred (or skipped).
+
+Return \fICURL_CHUNK_END_FUNC_OK\fP if everything is fine or
+\fBCURL_CHUNK_END_FUNC_FAIL\fP to tell the lib to stop if some error occurred.
+(This was added in 7.21.0)
+.IP CURLOPT_CHUNK_DATA
+Pass a pointer that will be untouched by libcurl and passed as the ptr
+argument to the \fICURL_CHUNK_BGN_FUNTION\fP and \fICURL_CHUNK_END_FUNTION\fP.
+(This was added in 7.21.0)
+.IP CURLOPT_FNMATCH_FUNCTION
+Function pointer that should match \fBint function(void *ptr, const char
+*pattern, const char *string)\fP prototype (see \fIcurl/curl.h\fP). It is used
+internally for the wildcard matching feature.
+
+Return \fICURL_FNMATCHFUNC_MATCH\fP if pattern matches the string,
+\fICURL_FNMATCHFUNC_NOMATCH\fP if not or \fICURL_FNMATCHFUNC_FAIL\fP if an
+error occurred.  (This was added in 7.21.0)
+.IP CURLOPT_FNMATCH_DATA
+Pass a pointer that will be untouched by libcurl and passed as the ptr argument
+to the \fICURL_FNMATCH_FUNCTION\fP. (This was added in 7.21.0)
 .SH ERROR OPTIONS
 .IP CURLOPT_ERRORBUFFER
 Pass a char * to a buffer that the libcurl may store human readable error
@@ -1165,9 +1259,15 @@ A parameter set to 1 tells the library to just list the names of files in a
 directory, instead of doing a full directory listing that would include file
 sizes, dates etc. This works for FTP and SFTP URLs.
 
-This causes an FTP NLST command to be sent on an FTP server.  Beware
-that some FTP servers list only files in their response to NLST; they
-might not include subdirectories and symbolic links.
+This causes an FTP NLST command to be sent on an FTP server.  Beware that some
+FTP servers list only files in their response to NLST; they might not include
+subdirectories and symbolic links.
+
+Setting this option to 1 also implies a directory listing even if the URL
+doesn't end with a slash, which otherwise is necessary.
+
+Do NOT use this option if you also use \fICURLOPT_WILDCARDMATCH\fP as it will
+effectively break that feature then.
 
 (This option was known as CURLOPT_FTPLISTONLY up to 7.16.4)
 .IP CURLOPT_APPEND
@@ -1445,6 +1545,10 @@ want the transfer to start from. Set this option to 0 to make the transfer
 start from the beginning (effectively disabling resume). For FTP, set this
 option to -1 to make the transfer start from the end of the target file
 (useful to continue an interrupted upload).
+
+When doing uploads with FTP, the resume position is where in the local/source
+file libcurl should try to resume the upload from and it will then append the
+source file to the remote target file.
 .IP CURLOPT_RESUME_FROM_LARGE
 Pass a curl_off_t as parameter. It contains the offset in number of bytes that
 you want the transfer to start from. (Added in 7.11.0)

docs/libcurl/curl_multi_socket_action.3

@@ -112,14 +112,15 @@ timeout value to use when waiting for socket activities.
 them for activity. This can be done through your application code, or by way
 of an external library such as libevent or glib.
 
-6. Wait for activity on any of libcurl's sockets, use the timeout value your
+6. Call curl_multi_socket_action() to kickstart everything. To get one or more
+callbacks called.
+
+7. Wait for activity on any of libcurl's sockets, use the timeout value your
 callback has been told
 
-7, When activity is detected, call curl_multi_socket_action() for the
+8, When activity is detected, call curl_multi_socket_action() for the
 socket(s) that got action. If no activity is detected and the timeout expires,
 call \fIcurl_multi_socket_action(3)\fP with \fICURL_SOCKET_TIMEOUT\fP
-
-8. Go back to step 6.
 .SH AVAILABILITY
 This function was added in libcurl 7.15.4, and is deemed stable since 7.16.0.
 .SH "SEE ALSO"

docs/libcurl/libcurl-errors.3

@@ -218,6 +218,16 @@ return code is only returned from \fIcurl_easy_recv(3)\fP and
 Failed to load CRL file (Added in 7.19.0)
 .IP "CURLE_SSL_ISSUER_ERROR (83)"
 Issuer check failed (Added in 7.19.0)
+.IP "CURLE_FTP_PRET_FAILED (84)"
+PRET command failed
+.IP "CURLE_RTSP_CSEQ_ERROR (85)"
+Mismatch of RTSP CSeq numbers.
+.IP "CURLE_RTSP_SESSION_ERROR (86)"
+Mismatch of RTSP Session Identifiers.
+.IP "CURLE_FTP_BAD_FILE_LIST (87)"
+Unable to parse FTP file list (during FTP wildcard downloading).
+.IP "CURLE_CHUNK_FAILED (88)"
+Chunk callback reported error.
 .IP "CURLE_OBSOLETE*"
 These error codes will never be returned. They were used in an old libcurl
 version and are currently unused.

docs/libcurl/libcurl-tutorial.3

@@ -275,6 +275,10 @@ NSS
 
  is claimed to be thread-safe already without anything required.
 
+PolarSSL
+
+ Required actions unknown.
+
 yassl
 
  Required actions unknown.
@@ -1233,6 +1237,15 @@ are used to generate structured data. Characters like embedded carriage
 returns or ampersands could allow the user to create additional headers or
 fields that could cause malicious transactions.
 
+.IP "Server-supplied Names"
+A server can supply data which the application may, in some cases, use as
+a file name. The curl command-line tool does this with --remote-header-name,
+using the Content-disposition: header to generate a file name.  An application
+could also use CURLINFO_EFFECTIVE_URL to generate a file name from a
+server-supplied redirect URL. Special care must be taken to sanitize such
+names to avoid the possibility of a malicious server supplying one like
+"/etc/passwd", "\autoexec.bat" or even ".bashrc".
+
 .IP "Server Certificates"
 A secure application should never use the CURLOPT_SSL_VERIFYPEER option to
 disable certificate validation. There are numerous attacks that are enabled

docs/libcurl/libcurl.m4

@@ -61,7 +61,7 @@ AC_DEFUN([LIBCURL_CHECK_CONFIG],
   AH_TEMPLATE([LIBCURL_PROTOCOL_SMTP],[Defined if libcurl supports SMTP])
 
   AC_ARG_WITH(libcurl,
-     AC_HELP_STRING([--with-libcurl=DIR],[look for the curl library in DIR]),
+     AC_HELP_STRING([--with-libcurl=PREFIX],[look for the curl library in PREFIX/lib and headers in PREFIX/include]),
      [_libcurl_with=$withval],[_libcurl_with=ifelse([$1],,[yes],[$1])])
 
   if test "$_libcurl_with" != "no" ; then
@@ -75,10 +75,10 @@ AC_DEFUN([LIBCURL_CHECK_CONFIG],
      if test -d "$_libcurl_with" ; then
         LIBCURL_CPPFLAGS="-I$withval/include"
         _libcurl_ldflags="-L$withval/lib"
-        AC_PATH_PROG([_libcurl_config],[curl-config],["$withval/bin"],
+        AC_PATH_PROG([_libcurl_config],[curl-config],[],
                      ["$withval/bin"])
      else
-        AC_PATH_PROG([_libcurl_config],[curl-config])
+        AC_PATH_PROG([_libcurl_config],[curl-config],[],[$PATH])
      fi
 
      if test x$_libcurl_config != "x" ; then

docs/libcurl/symbols-in-versions

@@ -151,11 +151,14 @@ CURLINFO_HTTPAUTH_AVAIL         7.10.8
 CURLINFO_HTTP_CODE              7.4.1         7.10.8
 CURLINFO_HTTP_CONNECTCODE       7.10.7
 CURLINFO_LASTSOCKET             7.15.2
+CURLINFO_LOCAL_IP               7.21.0
+CURLINFO_LOCAL_PORT             7.21.0
 CURLINFO_NAMELOOKUP_TIME        7.4.1
 CURLINFO_NUM_CONNECTS           7.12.3
 CURLINFO_OS_ERRNO               7.12.2
 CURLINFO_PRETRANSFER_TIME       7.4.1
 CURLINFO_PRIMARY_IP             7.19.0
+CURLINFO_PRIMARY_PORT           7.21.0
 CURLINFO_PRIVATE                7.10.3
 CURLINFO_PRIVATE                7.10.3
 CURLINFO_PROXYAUTH_AVAIL        7.10.8
@@ -188,6 +191,9 @@ CURLOPT_BUFFERSIZE              7.10
 CURLOPT_CAINFO                  7.4.2
 CURLOPT_CAPATH                  7.9.8
 CURLOPT_CERTINFO                7.19.1
+CURLOPT_CHUNK_BGN_FUNCTION      7.21.0
+CURLOPT_CHUNK_DATA              7.21.0
+CURLOPT_CHUNK_END_FUNCTION      7.21.0
 CURLOPT_CLOSEFUNCTION           7.7           7.11.1      7.15.4
 CURLOPT_CLOSEPOLICY             7.7           7.16.1
 CURLOPT_CONNECTTIMEOUT          7.7
@@ -217,6 +223,8 @@ CURLOPT_FAILONERROR             7.1
 CURLOPT_FILE                    7.1           7.9.7
 CURLOPT_FILETIME                7.5
 CURLOPT_FLAGS                   7.1           -           7.9.2
+CURLOPT_FNMATCH_DATA            7.21.0
+CURLOPT_FNMATCH_FUNCTION        7.21.0
 CURLOPT_FOLLOWLOCATION          7.1
 CURLOPT_FORBID_REUSE            7.7
 CURLOPT_FRESH_CONNECT           7.7
@@ -236,14 +244,6 @@ CURLOPT_FTP_SSL_CCC             7.16.1
 CURLOPT_FTP_USE_EPRT            7.10.5
 CURLOPT_FTP_USE_EPSV            7.9.2
 CURLOPT_FTP_USE_PRET            7.20.0
-CURLOPT_RTSP_REQUEST            7.20.0
-CURLOPT_RTSP_SESSION_ID         7.20.0
-CURLOPT_RTSP_STREAM_URI         7.20.0
-CURLOPT_RTSP_TRANSPORT          7.20.0
-CURLOPT_RTSP_CLIENT_CSEQ        7.20.0
-CURLOPT_RTSP_SERVER_CSEQ        7.20.0
-CURLOPT_INTERLEAVEDATA          7.20.0
-CURLOPT_INTERLEAVEFUNCTION      7.20.0
 CURLOPT_HEADER                  7.1
 CURLOPT_HEADERDATA              7.10
 CURLOPT_HEADERFUNCTION          7.7.2
@@ -262,6 +262,8 @@ CURLOPT_INFILE                  7.1           7.9.7
 CURLOPT_INFILESIZE              7.1
 CURLOPT_INFILESIZE_LARGE        7.11.0
 CURLOPT_INTERFACE               7.3
+CURLOPT_INTERLEAVEDATA          7.20.0
+CURLOPT_INTERLEAVEFUNCTION      7.20.0
 CURLOPT_IOCTLDATA               7.12.3
 CURLOPT_IOCTLFUNCTION           7.12.3
 CURLOPT_IPRESOLVE               7.10.8
@@ -328,6 +330,12 @@ CURLOPT_REDIR_PROTOCOLS         7.19.4
 CURLOPT_REFERER                 7.1
 CURLOPT_RESUME_FROM             7.1
 CURLOPT_RESUME_FROM_LARGE       7.11.0
+CURLOPT_RTSP_CLIENT_CSEQ        7.20.0
+CURLOPT_RTSP_REQUEST            7.20.0
+CURLOPT_RTSP_SERVER_CSEQ        7.20.0
+CURLOPT_RTSP_SESSION_ID         7.20.0
+CURLOPT_RTSP_STREAM_URI         7.20.0
+CURLOPT_RTSP_TRANSPORT          7.20.0
 CURLOPT_SEEKDATA                7.18.1
 CURLOPT_SEEKFUNCTION            7.18.1
 CURLOPT_SHARE                   7.10
@@ -380,6 +388,7 @@ CURLOPT_USERNAME                7.19.1
 CURLOPT_USERPWD                 7.1
 CURLOPT_USE_SSL                 7.17.0
 CURLOPT_VERBOSE                 7.1
+CURLOPT_WILDCARDMATCH           7.21.0
 CURLOPT_WRITEDATA               7.9.7
 CURLOPT_WRITEFUNCTION           7.1
 CURLOPT_WRITEHEADER             7.1
@@ -396,6 +405,12 @@ CURLPROTO_LDAP                  7.19.4
 CURLPROTO_LDAPS                 7.19.4
 CURLPROTO_POP3                  7.20.0
 CURLPROTO_POP3S                 7.20.0
+CURLPROTO_RTMP                  7.21.0
+CURLPROTO_RTMPE                 7.21.0
+CURLPROTO_RTMPS                 7.21.0
+CURLPROTO_RTMPT                 7.21.0
+CURLPROTO_RTMPTE                7.21.0
+CURLPROTO_RTMPTS                7.21.0
 CURLPROTO_RTSP                  7.20.0
 CURLPROTO_SCP                   7.19.4
 CURLPROTO_SFTP                  7.19.4
@@ -427,6 +442,14 @@ CURLVERSION_FIRST               7.10
 CURLVERSION_NOW                 7.10
 CURLVERSION_SECOND              7.11.1
 CURLVERSION_THIRD               7.12.0
+CURL_CHUNK_BGN_FUNC_FAIL        7.21.0
+CURL_CHUNK_BGN_FUNC_OK          7.21.0
+CURL_CHUNK_BGN_FUNC_SKIP        7.21.0
+CURL_CHUNK_END_FUNC_FAIL        7.21.0
+CURL_CHUNK_END_FUNC_OK          7.21.0
+CURL_FNMATCHFUNC_FAIL           7.21.0
+CURL_FNMATCHFUNC_MATCH          7.21.0
+CURL_FNMATCHFUNC_NOMATCH        7.21.0
 CURL_HTTP_VERSION_1_0           7.9.1
 CURL_HTTP_VERSION_1_1           7.9.1
 CURL_HTTP_VERSION_NONE          7.9.1

include/curl/.gitignore

@@ -1,3 +1,3 @@
 curlbuild.h
 stamp-h3
-
+curlver.h.dist

include/curl/curl.h

@@ -198,6 +198,97 @@ typedef size_t (*curl_write_callback)(char *buffer,
                                       size_t nitems,
                                       void *outstream);
 
+
+
+/* enumeration of file types */
+typedef enum {
+  CURLFILETYPE_FILE = 0,
+  CURLFILETYPE_DIRECTORY,
+  CURLFILETYPE_SYMLINK,
+  CURLFILETYPE_DEVICE_BLOCK,
+  CURLFILETYPE_DEVICE_CHAR,
+  CURLFILETYPE_NAMEDPIPE,
+  CURLFILETYPE_SOCKET,
+  CURLFILETYPE_DOOR, /* is possible only on Sun Solaris now */
+
+  CURLFILETYPE_UNKNOWN /* should never occur */
+} curlfiletype;
+
+#define CURLFINFOFLAG_KNOWN_FILENAME    (1<<0)
+#define CURLFINFOFLAG_KNOWN_FILETYPE    (1<<1)
+#define CURLFINFOFLAG_KNOWN_TIME        (1<<2)
+#define CURLFINFOFLAG_KNOWN_PERM        (1<<3)
+#define CURLFINFOFLAG_KNOWN_UID         (1<<4)
+#define CURLFINFOFLAG_KNOWN_GID         (1<<5)
+#define CURLFINFOFLAG_KNOWN_SIZE        (1<<6)
+#define CURLFINFOFLAG_KNOWN_HLINKCOUNT  (1<<7)
+
+/* Content of this structure depends on information which is known and is
+   achievable (e.g. by FTP LIST parsing). Please see the url_easy_setopt(3) man
+   page for callbacks returning this structure -- some fields are mandatory,
+   some others are optional. The FLAG field has special meaning. */
+struct curl_fileinfo {
+  char *filename;
+  curlfiletype filetype;
+  time_t time;
+  unsigned int perm;
+  int uid;
+  int gid;
+  curl_off_t size;
+  long int hardlinks;
+
+  struct {
+    /* If some of these fields is not NULL, it is a pointer to b_data. */
+    char *time;
+    char *perm;
+    char *user;
+    char *group;
+    char *target; /* pointer to the target filename of a symlink */
+  } strings;
+
+  unsigned int flags;
+
+  /* used internally */
+  char * b_data;
+  size_t b_size;
+  size_t b_used;
+};
+
+/* return codes for CURLOPT_CHUNK_BGN_FUNCTION */
+#define CURL_CHUNK_BGN_FUNC_OK      0
+#define CURL_CHUNK_BGN_FUNC_FAIL    1 /* tell the lib to end the task */
+#define CURL_CHUNK_BGN_FUNC_SKIP    2 /* skip this chunk over */
+
+/* if splitting of data transfer is enabled, this callback is called before
+   download of an individual chunk started. Note that parameter "remains" works
+   only for FTP wildcard downloading (for now), otherwise is not used */
+typedef long (*curl_chunk_bgn_callback)(const void *transfer_info,
+                                        void *ptr,
+                                        int remains);
+
+/* return codes for CURLOPT_CHUNK_END_FUNCTION */
+#define CURL_CHUNK_END_FUNC_OK      0
+#define CURL_CHUNK_END_FUNC_FAIL    1 /* tell the lib to end the task */
+
+/* If splitting of data transfer is enabled this callback is called after
+   download of an individual chunk finished.
+   Note! After this callback was set then it have to be called FOR ALL chunks.
+   Even if downloading of this chunk was skipped in CHUNK_BGN_FUNC.
+   This is the reason why we don't need "transfer_info" parameter in this
+   callback and we are not interested in "remains" parameter too. */
+typedef long (*curl_chunk_end_callback)(void *ptr);
+
+/* return codes for FNMATCHFUNCTION */
+#define CURL_FNMATCHFUNC_MATCH    0 /* string corresponds to the pattern */
+#define CURL_FNMATCHFUNC_NOMATCH  1 /* pattern doesn't match the string */
+#define CURL_FNMATCHFUNC_FAIL     2 /* an error occurred */
+
+/* callback type for wildcard downloading pattern matching. If the
+   string matches the pattern, return CURL_FNMATCHFUNC_MATCH value, etc. */
+typedef int (*curl_fnmatch_callback)(void *ptr,
+                                     const char *pattern,
+                                     const char *string);
+
 /* These are the return codes for the seek callbacks */
 #define CURL_SEEKFUNC_OK       0
 #define CURL_SEEKFUNC_FAIL     1 /* fail the entire transfer */
@@ -409,6 +500,8 @@ typedef enum {
   CURLE_FTP_PRET_FAILED,         /* 84 - a PRET command failed */
   CURLE_RTSP_CSEQ_ERROR,         /* 85 - mismatch of RTSP CSeq numbers */
   CURLE_RTSP_SESSION_ERROR,      /* 86 - mismatch of RTSP Session Identifiers */
+  CURLE_FTP_BAD_FILE_LIST,       /* 87 - unable to parse FTP file list */
+  CURLE_CHUNK_FAILED,            /* 88 - chunk callback reported error */
 
   CURL_LAST /* never use! */
 } CURLcode;
@@ -623,6 +716,13 @@ typedef enum {
 #define CURLPROTO_SMTP   (1<<16)
 #define CURLPROTO_SMTPS  (1<<17)
 #define CURLPROTO_RTSP   (1<<18)
+#define CURLPROTO_RTMP   (1<<19)
+#define CURLPROTO_RTMPT  (1<<20)
+#define CURLPROTO_RTMPE  (1<<21)
+#define CURLPROTO_RTMPTE (1<<22)
+#define CURLPROTO_RTMPS  (1<<23)
+#define CURLPROTO_RTMPTS (1<<24)
+#define CURLPROTO_GOPHER (1<<25)
 #define CURLPROTO_ALL    (~0) /* enable everything */
 
 /* long may be 32 or 64 bits, but we should never depend on anything else
@@ -1316,6 +1416,26 @@ typedef enum {
   /* Let the application define a custom write method for RTP data */
   CINIT(INTERLEAVEFUNCTION, FUNCTIONPOINT, 196),
 
+  /* Turn on wildcard matching */
+  CINIT(WILDCARDMATCH, LONG, 197),
+
+  /* Directory matching callback called before downloading of an
+     individual file (chunk) started */
+  CINIT(CHUNK_BGN_FUNCTION, FUNCTIONPOINT, 198),
+
+  /* Directory matching callback called after the file (chunk)
+     was downloaded, or skipped */
+  CINIT(CHUNK_END_FUNCTION, FUNCTIONPOINT, 199),
+
+  /* Change match (fnmatch-like) callback for wildcard matching */
+  CINIT(FNMATCH_FUNCTION, FUNCTIONPOINT, 200),
+
+  /* Let the application define custom chunk data pointer */
+  CINIT(CHUNK_DATA, OBJECTPOINT, 201),
+
+  /* FNMATCH_FUNCTION user pointer */
+  CINIT(FNMATCH_DATA, OBJECTPOINT, 202),
+
   CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
@@ -1764,9 +1884,12 @@ typedef enum {
   CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG   + 37,
   CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG   + 38,
   CURLINFO_RTSP_CSEQ_RECV   = CURLINFO_LONG   + 39,
+  CURLINFO_PRIMARY_PORT     = CURLINFO_LONG   + 40,
+  CURLINFO_LOCAL_IP         = CURLINFO_STRING + 41,
+  CURLINFO_LOCAL_PORT       = CURLINFO_LONG   + 42,
   /* Fill in new entries below here! */
 
-  CURLINFO_LASTONE          = 39
+  CURLINFO_LASTONE          = 42
 } CURLINFO;
 
 /* CURLINFO_RESPONSE_CODE is the new name for the option previously known as

include/curl/curlver.h

@@ -30,13 +30,13 @@
 
 /* This is the version number of the libcurl package from which this header
    file origins: */
-#define LIBCURL_VERSION "7.20.1-DEV"
+#define LIBCURL_VERSION "7.21.2-DEV"
 
 /* The numeric version number is also available "in parts" by using these
    defines: */
 #define LIBCURL_VERSION_MAJOR 7
-#define LIBCURL_VERSION_MINOR 20
-#define LIBCURL_VERSION_PATCH 1
+#define LIBCURL_VERSION_MINOR 21
+#define LIBCURL_VERSION_PATCH 2
 
 /* This is the numeric version of the libcurl version number, meant for easier
    parsing and comparions by programs. The LIBCURL_VERSION_NUM define will
@@ -53,7 +53,7 @@
    and it is always a greater number in a more recent release. It makes
    comparisons with greater than and less than work.
 */
-#define LIBCURL_VERSION_NUM 0x071401
+#define LIBCURL_VERSION_NUM 0x071502
 
 /*
  * This is the date and time when the full source package was created. The

include/curl/typecheck-gcc.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -25,11 +25,16 @@
 /* wraps curl_easy_setopt() with typechecking */
 
 /* To add a new kind of warning, add an
- *   if(_curl_is_sometype_option(_curl_opt) && ! _curl_is_sometype(value))
+ *   if(_curl_is_sometype_option(_curl_opt))
+ *     if(!_curl_is_sometype(value))
  *       _curl_easy_setopt_err_sometype();
  * block and define _curl_is_sometype_option, _curl_is_sometype and
  * _curl_easy_setopt_err_sometype below
  *
+ * NOTE: We use two nested 'if' statements here instead of the && operator, in
+ *       order to work around gcc bug #32061.  It affects only gcc 4.3.x/4.4.x
+ *       when compiling with -Wlogical-op.
+ *
  * To add an option that uses the same type as an existing option, you'll just
  * need to extend the appropriate _curl_*_option macro
  */
@@ -37,50 +42,65 @@
 __extension__ ({                                                              \
   __typeof__ (option) _curl_opt = option;                                     \
   if (__builtin_constant_p(_curl_opt)) {                                      \
-    if (_curl_is_long_option(_curl_opt) && !_curl_is_long(value))             \
+    if (_curl_is_long_option(_curl_opt))                                      \
+      if (!_curl_is_long(value))                                              \
         _curl_easy_setopt_err_long();                                         \
-    if (_curl_is_off_t_option(_curl_opt) && !_curl_is_off_t(value))           \
+    if (_curl_is_off_t_option(_curl_opt))                                     \
+      if (!_curl_is_off_t(value))                                             \
         _curl_easy_setopt_err_curl_off_t();                                   \
-    if (_curl_is_string_option(_curl_opt) && !_curl_is_string(value))         \
+    if (_curl_is_string_option(_curl_opt))                                    \
+      if (!_curl_is_string(value))                                            \
         _curl_easy_setopt_err_string();                                       \
-    if (_curl_is_write_cb_option(_curl_opt) && !_curl_is_write_cb(value))     \
+    if (_curl_is_write_cb_option(_curl_opt))                                  \
+      if (!_curl_is_write_cb(value))                                          \
         _curl_easy_setopt_err_write_callback();                               \
-    if ((_curl_opt) == CURLOPT_READFUNCTION && !_curl_is_read_cb(value))      \
+    if ((_curl_opt) == CURLOPT_READFUNCTION)                                  \
+      if (!_curl_is_read_cb(value))                                           \
         _curl_easy_setopt_err_read_cb();                                      \
-    if ((_curl_opt) == CURLOPT_IOCTLFUNCTION && !_curl_is_ioctl_cb(value))    \
+    if ((_curl_opt) == CURLOPT_IOCTLFUNCTION)                                 \
+      if (!_curl_is_ioctl_cb(value))                                          \
         _curl_easy_setopt_err_ioctl_cb();                                     \
-    if ((_curl_opt) == CURLOPT_SOCKOPTFUNCTION && !_curl_is_sockopt_cb(value))\
+    if ((_curl_opt) == CURLOPT_SOCKOPTFUNCTION)                               \
+      if (!_curl_is_sockopt_cb(value))                                        \
         _curl_easy_setopt_err_sockopt_cb();                                   \
-    if ((_curl_opt) == CURLOPT_OPENSOCKETFUNCTION &&                          \
-            !_curl_is_opensocket_cb(value))                                   \
+    if ((_curl_opt) == CURLOPT_OPENSOCKETFUNCTION)                            \
+      if (!_curl_is_opensocket_cb(value))                                     \
         _curl_easy_setopt_err_opensocket_cb();                                \
-    if ((_curl_opt) == CURLOPT_PROGRESSFUNCTION &&                            \
-            !_curl_is_progress_cb(value))                                     \
+    if ((_curl_opt) == CURLOPT_PROGRESSFUNCTION)                              \
+      if (!_curl_is_progress_cb(value))                                       \
         _curl_easy_setopt_err_progress_cb();                                  \
-    if ((_curl_opt) == CURLOPT_DEBUGFUNCTION && !_curl_is_debug_cb(value))    \
+    if ((_curl_opt) == CURLOPT_DEBUGFUNCTION)                                 \
+      if (!_curl_is_debug_cb(value))                                          \
         _curl_easy_setopt_err_debug_cb();                                     \
-    if ((_curl_opt) == CURLOPT_SSL_CTX_FUNCTION &&                            \
-            !_curl_is_ssl_ctx_cb(value))                                      \
+    if ((_curl_opt) == CURLOPT_SSL_CTX_FUNCTION)                              \
+      if (!_curl_is_ssl_ctx_cb(value))                                        \
         _curl_easy_setopt_err_ssl_ctx_cb();                                   \
-    if (_curl_is_conv_cb_option(_curl_opt) && !_curl_is_conv_cb(value))       \
+    if (_curl_is_conv_cb_option(_curl_opt))                                   \
+      if (!_curl_is_conv_cb(value))                                           \
         _curl_easy_setopt_err_conv_cb();                                      \
-    if ((_curl_opt) == CURLOPT_SEEKFUNCTION && !_curl_is_seek_cb(value))      \
+    if ((_curl_opt) == CURLOPT_SEEKFUNCTION)                                  \
+      if (!_curl_is_seek_cb(value))                                           \
         _curl_easy_setopt_err_seek_cb();                                      \
-    if (_curl_is_cb_data_option(_curl_opt) && !_curl_is_cb_data(value))       \
+    if (_curl_is_cb_data_option(_curl_opt))                                   \
+      if (!_curl_is_cb_data(value))                                           \
         _curl_easy_setopt_err_cb_data();                                      \
-    if ((_curl_opt) == CURLOPT_ERRORBUFFER && !_curl_is_error_buffer(value))  \
+    if ((_curl_opt) == CURLOPT_ERRORBUFFER)                                   \
+      if (!_curl_is_error_buffer(value))                                      \
         _curl_easy_setopt_err_error_buffer();                                 \
-    if ((_curl_opt) == CURLOPT_STDERR && !_curl_is_FILE(value))               \
+    if ((_curl_opt) == CURLOPT_STDERR)                                        \
+      if (!_curl_is_FILE(value))                                              \
         _curl_easy_setopt_err_FILE();                                         \
-    if (_curl_is_postfields_option(_curl_opt) && !_curl_is_postfields(value)) \
+    if (_curl_is_postfields_option(_curl_opt))                                \
+      if (!_curl_is_postfields(value))                                        \
         _curl_easy_setopt_err_postfields();                                   \
-    if ((_curl_opt) == CURLOPT_HTTPPOST &&                                    \
-            !_curl_is_arr((value), struct curl_httppost))                     \
+    if ((_curl_opt) == CURLOPT_HTTPPOST)                                      \
+      if (!_curl_is_arr((value), struct curl_httppost))                       \
         _curl_easy_setopt_err_curl_httpost();                                 \
-    if (_curl_is_slist_option(_curl_opt) &&                                   \
-            !_curl_is_arr((value), struct curl_slist))                        \
+    if (_curl_is_slist_option(_curl_opt))                                     \
+      if (!_curl_is_arr((value), struct curl_slist))                          \
         _curl_easy_setopt_err_curl_slist();                                   \
-    if ((_curl_opt) == CURLOPT_SHARE && !_curl_is_ptr((value), CURLSH))       \
+    if ((_curl_opt) == CURLOPT_SHARE)                                         \
+      if (!_curl_is_ptr((value), CURLSH))                                     \
         _curl_easy_setopt_err_CURLSH();                                       \
   }                                                                           \
   curl_easy_setopt(handle, _curl_opt, value);                                 \
@@ -92,14 +112,17 @@ __extension__ ({                                                              \
 __extension__ ({                                                              \
   __typeof__ (info) _curl_info = info;                                        \
   if (__builtin_constant_p(_curl_info)) {                                     \
-    if (_curl_is_string_info(_curl_info) && !_curl_is_arr((arg), char *))     \
+    if (_curl_is_string_info(_curl_info))                                     \
+      if (!_curl_is_arr((arg), char *))                                       \
         _curl_easy_getinfo_err_string();                                      \
-    if (_curl_is_long_info(_curl_info) && !_curl_is_arr((arg), long))         \
+    if (_curl_is_long_info(_curl_info))                                       \
+      if (!_curl_is_arr((arg), long))                                         \
         _curl_easy_getinfo_err_long();                                        \
-    if (_curl_is_double_info(_curl_info) && !_curl_is_arr((arg), double))     \
+    if (_curl_is_double_info(_curl_info))                                     \
+      if (!_curl_is_arr((arg), double))                                       \
         _curl_easy_getinfo_err_double();                                      \
-    if (_curl_is_slist_info(_curl_info) &&                                    \
-           !_curl_is_arr((arg), struct curl_slist *))                         \
+    if (_curl_is_slist_info(_curl_info))                                      \
+      if (!_curl_is_arr((arg), struct curl_slist *))                          \
         _curl_easy_getinfo_err_curl_slist();                                  \
   }                                                                           \
   curl_easy_getinfo(handle, _curl_info, arg);                                 \
@@ -230,6 +253,12 @@ _CURL_WARNING(_curl_easy_getinfo_err_curl_slist,
    (option) == CURLOPT_SSH_PRIVATE_KEYFILE ||                                 \
    (option) == CURLOPT_CRLFILE ||                                             \
    (option) == CURLOPT_ISSUERCERT ||                                          \
+   (option) == CURLOPT_SOCKS5_GSSAPI_SERVICE ||                               \
+   (option) == CURLOPT_SSH_KNOWNHOSTS ||                                      \
+   (option) == CURLOPT_MAIL_FROM ||                                           \
+   (option) == CURLOPT_RTSP_SESSION_ID ||                                     \
+   (option) == CURLOPT_RTSP_STREAM_URI ||                                     \
+   (option) == CURLOPT_RTSP_TRANSPORT ||                                      \
    0)
 
 /* evaluates to true if option takes a curl_write_callback argument */
@@ -256,6 +285,10 @@ _CURL_WARNING(_curl_easy_getinfo_err_curl_slist,
    (option) == CURLOPT_SSL_CTX_DATA ||                                        \
    (option) == CURLOPT_SEEKDATA ||                                            \
    (option) == CURLOPT_PRIVATE ||                                             \
+   (option) == CURLOPT_SSH_KEYDATA ||                                         \
+   (option) == CURLOPT_INTERLEAVEDATA ||                                      \
+   (option) == CURLOPT_CHUNK_DATA ||                                          \
+   (option) == CURLOPT_FNMATCH_DATA ||                                        \
    0)
 
 /* evaluates to true if option takes a POST data argument (void* or char*) */
@@ -272,6 +305,7 @@ _CURL_WARNING(_curl_easy_getinfo_err_curl_slist,
    (option) == CURLOPT_POSTQUOTE ||                                           \
    (option) == CURLOPT_PREQUOTE ||                                            \
    (option) == CURLOPT_TELNETOPTIONS ||                                       \
+   (option) == CURLOPT_MAIL_RCPT ||                                           \
    0)
 
 /* groups of curl_easy_getinfo infos that take the same type of argument */

lib/.gitignore

@@ -4,3 +4,8 @@ stamp-h1
 *.orig
 *.rej
 TAGS
+Makefile.vc8.dist
+Makefile.vc9.dist
+libcurl.plist.dist
+libcurl.vcproj
+vc6libcurl.dsp

lib/Makefile.Watcom

@@ -3,56 +3,131 @@
 #  G. Vanem <gvanem@broadpark.no>
 #
 
-TARGETS = libcurl_wc.dll libcurl_wc_imp.lib libcurl_wc.lib
+!ifndef %watcom
+!error WATCOM environment variable not set!
+!else
+SYS_INCL = -I$(%watcom)\h\nt -I$(%watcom)\h
+SYS_LIBS = $(%watcom)\lib386\nt;$(%watcom)\lib386
+!endif
+
+!ifdef %libname
+LIBNAME = $(%libname)
+!else
+LIBNAME = libcurl
+!endif
+TARGETS = $(LIBNAME).dll $(LIBNAME)_imp.lib $(LIBNAME).lib
 
 CC = wcc386
+LD = wlink
+AR = wlib
+RC = wrc
 
-CFLAGS = -3s -mf -d3 -hc -zff -zgf -zq -zm -zc -s -fr=con -w2 -fpi -oilrtfm -bt=nt &
-         -bd -d+ -dWIN32 -dCURL_CA_BUNDLE=getenv("CURL_CA_BUNDLE")                 &
-         -dBUILDING_LIBCURL -dHAVE_SPNEGO=1 -dENABLE_IPV6                          &
-         -dDEBUG=1 -dDEBUGBUILD -d_WIN32_WINNT=0x0501 -dWINBERAPI=__declspec(cdecl) &
-         -dWINLDAPAPI=__declspec(cdecl) -I. -I..\include
+!ifdef __LOADDLL__
+!  loaddll wcc386  wccd386
+!  loaddll wpp386  wppd386
+!  loaddll wlib    wlibd
+!  if $(__VERSION__) > 1270
+!    loaddll wlink   wlinkd
+!  else
+!    loaddll wlink   wlink
+!  endif
+!endif
+
+!if $(__VERSION__) < 1250                                                                                                           
+RM = del /q /f 2>NUL
+!else                                                                                                                               
+RM = rm -f                                                                                                                          
+!endif
+MD = mkdir
+RD = rmdir /q /s 2>NUL
+CP = copy
+
+CFLAGS = -3r -mf -hc -zff -zgf -zq -zm -zc -s -fr=con -w2 -fpi -oilrtfm &
+         -wcd=201 -bt=nt -d+ -dWIN32 -dCURL_WANTS_CA_BUNDLE_ENV         &
+         -dBUILDING_LIBCURL -dHAVE_SPNEGO=1 -I. -I..\include $(SYS_INCL)
+
+!ifdef %debug
+DEBUG  = -dDEBUG=1 -dDEBUGBUILD
+CFLAGS += -d3 $(DEBUG)
+!else
+CFLAGS += -d0
+!endif
+
+!ifdef %use_ipv6
+CFLAGS += -d_WIN32_WINNT=0x0501 -dENABLE_IPV6
+!endif
+
+!ifdef %use_sspi
+CFLAGS += -dUSE_WINDOWS_SSPI
+!endif
 
 #
 # Change to suite.
 #
-ZLIB_ROOT  = ..\..\..\zlib-1.2.3
-USE_ZLIB   = 0
-USE_ARES   = 0
-USE_WATT32 = 0
+!ifdef %zlib_root
+ZLIB_ROOT = $(%zlib_root)
+!else
+ZLIB_ROOT = ..\..\zlib-1.2.5
+!endif
 
-!ifeq USE_ZLIB 1
+!ifdef %libssh2_root
+LIBSSH2_ROOT = $(%libssh2_root)
+!else
+LIBSSH2_ROOT = ..\..\libssh2-1.2.7
+!endif
+
+!ifdef %librtmp_root
+LIBRTMP_ROOT = $(%librtmp_root)
+!else
+LIBRTMP_ROOT = ..\..\librtmp-2.3
+!endif
+
+!ifdef %openssl_root
+OPENSSL_ROOT = $(%openssl_root)
+!else
+OPENSSL_ROOT = ..\..\openssl-0.9.8o
+!endif
+
+!ifdef %ares_root
+ARES_ROOT = $(%ares_root)
+!else
+ARES_ROOT = ..\ares
+!endif
+
+!ifdef %use_zlib
 CFLAGS += -dHAVE_ZLIB_H -dHAVE_LIBZ -I$(ZLIB_ROOT)
 !endif
 
-!ifeq USE_ARES 1
-CFLAGS += -dUSE_ARES -I..\ares
+!ifdef %use_rtmp
+CFLAGS += -dUSE_LIBRTMP -I$(LIBRTMP_ROOT)
 !endif
 
-!ifeq USE_WATT32 1
+!ifdef %use_ssh2
+CFLAGS += -DUSE_LIBSSH2 -DHAVE_LIBSSH2_H -I$(LIBSSH2_ROOT)\include -I$(LIBSSH2_ROOT)\win32
+!endif
+
+!ifdef %use_ssl
+CFLAGS += -wcd=138 -dUSE_OPENSSL -dUSE_SSLEAY -I$(OPENSSL_ROOT)\inc32
+!endif
+
+!ifdef %use_ares
+CFLAGS += -dUSE_ARES -I$(ARES_ROOT)
+!endif
+
+!ifdef %use_watt32
 CFLAGS += -dUSE_WATT32 -I$(%watt_root)\inc
 !endif
 
 OBJ_BASE = WC_Win32.obj
-C_ARG    = $(OBJ_BASE)\wcc386.arg
 LINK_ARG = $(OBJ_BASE)\dyn\wlink.arg
 LIB_ARG  = $(OBJ_BASE)\stat\wlib.arg
 
-# Unfortunately, we can't include Makefile.inc here because wmake doesn't
-# use backslash as the line continuation character by default
-CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	&
-  cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c	&
-  ldap.c ssluse.c version.c getenv.c escape.c mprintf.c telnet.c	&
-  netrc.c getinfo.c transfer.c strequal.c easy.c security.c krb4.c	&
-  krb5.c memdebug.c http_chunks.c strtok.c connect.c llist.c hash.c	&
-  multi.c content_encoding.c share.c http_digest.c md5.c curl_rand.c	&
-  http_negotiate.c http_ntlm.c inet_pton.c strtoofft.c strerror.c	&
-  hostares.c hostasyn.c hostip4.c hostip6.c hostsyn.c hostthre.c	&
-  inet_ntop.c parsedate.c select.c gtls.c sslgen.c tftp.c splay.c	&
-  strdup.c socks.c ssh.c nss.c qssl.c rawstr.c curl_addrinfo.c          &
-  socks_gssapi.c socks_sspi.c curl_sspi.c slist.c nonblock.c		&
-  curl_memrchr.c imap.c pop3.c smtp.c pingpong.c rtsp.c curl_threads.c	&
-  warnless.c
+# In order to process Makefile.inc wmake must be called with -u switch!
+!ifndef %MAKEFLAGS
+!error You MUST call wmake with the -u switch!
+!else
+!include Makefile.inc
+!endif
 
 OBJS = $(CSOURCES:.c=.obj)
 OBJS = $OBJ_DIR\$(OBJS: = $OBJ_DIR\)
@@ -66,500 +141,82 @@ OBJS_STAT = $+ $(OBJS) $-
 OBJ_DIR    = $(OBJ_BASE)\dyn
 OBJS_DYN   = $+ $(OBJS) $-
 
+CURLBUILDH = ..\include\curl\curlbuild.h
 RESOURCE   = $(OBJ_BASE)\dyn\libcurl.res
 
-all: $(OBJ_BASE) $(C_ARG) $(TARGETS) .SYMBOLIC
+all: $(CURLBUILDH) $(OBJ_BASE) $(TARGETS) .SYMBOLIC
 	@echo Welcome to libcurl
 
-$(OBJ_BASE):
-	- mkdir $(OBJ_BASE)
-	- mkdir $(OBJ_BASE)\stat
-	- mkdir $(OBJ_BASE)\dyn
-
-libcurl_wc.dll libcurl_wc_imp.lib: $(OBJS_DYN) $(RESOURCE) $(LINK_ARG)
-	wlink name libcurl_wc.dll @$(LINK_ARG)
-
-libcurl_wc.lib: $(OBJS_STAT) $(LIB_ARG)
-	wlib -q -b- c $@ @$(LIB_ARG)
-
 clean: .SYMBOLIC
-	- rm -f $(OBJS_STAT) $(OBJS_DYN) $(RESOURCE) $(C_ARG) $(LINK_ARG) $(LIB_ARG)
+	-$(RM) $(OBJS_STAT)
+	-$(RM) $(OBJS_DYN)
+	-$(RM) $(RESOURCE) $(LINK_ARG) $(LIB_ARG)
 
-vclean realclean: clean .SYMBOLIC
-	- rm -f $(TARGETS) libcurl_wc.map
-	- rmdir $(OBJ_BASE)\stat
-	- rmdir $(OBJ_BASE)\dyn
-	- rmdir $(OBJ_BASE)
+vclean distclean: clean .SYMBOLIC
+	-$(RM) $(TARGETS) $(LIBNAME).map $(LIBNAME).sym
+	-$(RD) $(OBJ_BASE)\stat
+	-$(RD) $(OBJ_BASE)\dyn
+	-$(RD) $(OBJ_BASE)
+
+$(OBJ_BASE):
+	-$(MD) $^@
+	-$(MD) $^@\stat
+	-$(MD) $^@\dyn
+
+$(CURLBUILDH): .EXISTSONLY
+	$(CP) $^@.dist $^@
+
+$(LIBNAME).dll: $(OBJS_DYN) $(RESOURCE) $(LINK_ARG)
+	$(LD) name $^@ @$]@
+
+$(LIBNAME).lib: $(OBJS_STAT) $(LIB_ARG)
+	$(AR) -q -b -c $^@ @$]@
 
 .ERASE
 $(RESOURCE): libcurl.rc
-        wrc -dDEBUGBUILD=1 -q -r -zm -I..\include -fo=$@ libcurl.rc
+	$(RC) $(DEBUG) -q -r -zm -I..\include $(SYS_INCL) $[@ -fo=$^@
 
 .ERASE
 .c{$(OBJ_BASE)\dyn}.obj:
-	$(CC) $[@ @$(C_ARG) -fo=$@
+	$(CC) $(CFLAGS) -bd -br $[@ -fo=$^@
 
 .ERASE
 .c{$(OBJ_BASE)\stat}.obj:
-	$(CC) $[@ @$(C_ARG) -DCURL_STATICLIB -fo=$@
-
-$(C_ARG): $(__MAKEFILES__)
-	%create $^@
-	%append $^@ $(CFLAGS)
+	$(CC) $(CFLAGS) -DCURL_STATICLIB $[@ -fo=$^@
 
 $(LINK_ARG): $(__MAKEFILES__)
 	%create $^@
 	@%append $^@ system nt dll
 	@%append $^@ file { $(OBJS_DYN) }
-	@%append $^@ option quiet, map, caseexact, eliminate, implib=libcurl_wc_imp.lib,
-	@%append $^@ res=$(RESOURCE) libpath $(%watcom)\lib386;$(%watcom)\lib386\nt
-	@%append $^@ library clib3s.lib, wldap32.lib
-!ifeq USE_WATT32 1
+!ifdef %debug
+	@%append $^@ debug all
+	@%append $^@ option symfile
+!endif
+	@%append $^@ option quiet, map, caseexact, eliminate, implib=$(LIBNAME)_imp.lib,
+	@%append $^@ res=$(RESOURCE) libpath $(SYS_LIBS)
+	@%append $^@ library wldap32.lib
+!ifdef %use_watt32
 	@%append $^@ library $(%watt_root)\lib\wattcpw_imp.lib
 !else
 	@%append $^@ library ws2_32.lib
 !endif
-!ifeq USE_ZLIB 1
+!ifdef %use_zlib
 	@%append $^@ library $(ZLIB_ROOT)\zlib.lib
 !endif
-!ifeq USE_ARES 1
-	@%append $^@ library ..\ares\cares.lib
+!ifdef %use_rtmp
+	@%append $^@ library $(LIBRTMP_ROOT)\librtmp\librtmp.lib
+!endif
+!ifdef %use_ssh2
+	@%append $^@ library $(LIBSSH2_ROOT)\win32\libssh2.lib
+!endif
+!ifdef %use_ssl
+	@%append $^@ library $(OPENSSL_ROOT)\out32\libeay32.lib, $(OPENSSL_ROOT)\out32\ssleay32.lib
+!endif
+!ifdef %use_ares
+	@%append $^@ library $(ARES_ROOT)\cares.lib
 !endif
 
 $(LIB_ARG): $(__MAKEFILES__)
 	%create $^@
-	for %f in ($(OBJS_STAT)) do @%append $^@ +- %f
+	@for %f in ($(OBJS_STAT)) do @%append $^@ +- %f
 
-#
-# Dependencies based on "gcc -MM .."
-#
-$(OBJ_DIR)\file.obj: file.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strtoofft.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  progress.h sendf.h escape.h file.h speedcheck.h getinfo.h transfer.h &
-  url.h curl_memory.h parsedate.h ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\timeval.obj: timeval.c timeval.h setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\base64.obj: base64.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\mprintf.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h urldata.h cookie.h ..\include\curl\curl.h &
-  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h easyif.h curl_base64.h curl_memory.h memdebug.h
-$(OBJ_DIR)\hostip.obj: hostip.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h inet_ntop.h ..\include\curl\mprintf.h curl_memory.h &
-  memdebug.h
-$(OBJ_DIR)\progress.obj: progress.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  progress.h ..\include\curl\mprintf.h
-$(OBJ_DIR)\formdata.obj: formdata.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h easyif.h strequal.h curl_memory.h &
-  curl_rand.h ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\cookie.obj: cookie.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\mprintf.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h urldata.h cookie.h ..\include\curl\curl.h &
-  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h strequal.h strtok.h sendf.h curl_memory.h share.h &
-  strtoofft.h rawstr.h memdebug.h curl_memrchr.h
-$(OBJ_DIR)\http.obj: http.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  transfer.h sendf.h easyif.h progress.h curl_base64.h strequal.h &
-  sslgen.h http_digest.h http_ntlm.h http_negotiate.h url.h share.h &
-  http.h curl_memory.h select.h parsedate.h strtoofft.h multiif.h rawstr.h &
-  ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\sendf.obj: sendf.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h sendf.h connect.h sslgen.h ssh.h &
-  multiif.h ..\include\curl\mprintf.h curl_memory.h strerror.h easyif.h &
-  memdebug.h
-$(OBJ_DIR)\ftp.obj: ftp.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h sendf.h easyif.h if2ip.h progress.h &
-  transfer.h escape.h http.h socks.h ftp.h strtoofft.h strequal.h &
-  sslgen.h connect.h strerror.h inet_ntop.h inet_pton.h select.h &
-  parsedate.h sockaddr.h multiif.h url.h ..\include\curl\mprintf.h &
-  curl_memory.h memdebug.h
-$(OBJ_DIR)\url.obj: url.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h netrc.h &
-  sslgen.h transfer.h sendf.h progress.h strequal.h strerror.h escape.h &
-  strtok.h share.h content_encoding.h http_digest.h http_negotiate.h &
-  select.h multiif.h easyif.h speedcheck.h rawstr.h ftp.h dict.h telnet.h &
-  tftp.h http.h file.h curl_ldap.h ssh.h url.h connect.h inet_ntop.h &
-  http_ntlm.h socks.h ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\dict.obj: dict.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  transfer.h sendf.h progress.h strequal.h dict.h rawstr.h &
-  ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\if2ip.obj: if2ip.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h inet_ntop.h strequal.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h if2ip.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\speedcheck.obj: speedcheck.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
-  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h sendf.h multiif.h speedcheck.h
-$(OBJ_DIR)\ldap.obj: ldap.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\ssluse.obj: ssluse.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  url.h inet_pton.h ssluse.h connect.h strequal.h select.h sslgen.h &
-  rawstr.h ..\include\curl\mprintf.h
-$(OBJ_DIR)\version.obj: version.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h sslgen.h ..\include\curl\mprintf.h
-$(OBJ_DIR)\getenv.obj: getenv.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  curl_memory.h memdebug.h
-$(OBJ_DIR)\escape.obj: escape.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  curl_memory.h urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h &
-  hash.h llist.h curl_addrinfo.h splay.h easyif.h &
-  ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\mprintf.obj: mprintf.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\mprintf.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h curl_memory.h ..\include\curl\curl.h memdebug.h
-$(OBJ_DIR)\telnet.obj: telnet.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  transfer.h sendf.h telnet.h connect.h ..\include\curl\mprintf.h &
-  arpa_telnet.h curl_memory.h select.h strequal.h rawstr.h memdebug.h
-$(OBJ_DIR)\netrc.obj: netrc.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  netrc.h strequal.h strtok.h curl_memory.h rawstr.h ..\include\curl\mprintf.h &
-  memdebug.h
-$(OBJ_DIR)\getinfo.obj: getinfo.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h getinfo.h curl_memory.h sslgen.h connect.h &
-  memdebug.h
-$(OBJ_DIR)\transfer.obj: transfer.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strtoofft.h strequal.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h rawstr.h urldata.h &
-  cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h netrc.h content_encoding.h transfer.h sendf.h &
-  speedcheck.h progress.h http.h url.h getinfo.h sslgen.h http_digest.h &
-  http_ntlm.h http_negotiate.h share.h curl_memory.h select.h multiif.h &
-  easyif.h ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\strequal.obj: strequal.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strequal.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h
-$(OBJ_DIR)\easy.obj: easy.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strequal.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
-  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h transfer.h sslgen.h url.h getinfo.h share.h &
-  strdup.h curl_memory.h progress.h easyif.h select.h sendf.h http_ntlm.h &
-  curl_rand.h connect.h ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\security.obj: security.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\krb4.obj: krb4.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\krb5.obj: krb5.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\memdebug.obj: memdebug.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  ..\include\curl\mprintf.h urldata.h cookie.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h curl_memory.h &
-  memdebug.h
-$(OBJ_DIR)\http_chunks.obj: http_chunks.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  urldata.h cookie.h ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  content_encoding.h http.h curl_memory.h easyif.h ..\include\curl\mprintf.h &
-  memdebug.h
-$(OBJ_DIR)\strtok.obj: strtok.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strtok.h
-$(OBJ_DIR)\connect.obj: connect.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\mprintf.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h urldata.h cookie.h ..\include\curl\curl.h &
-  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h sendf.h if2ip.h strerror.h connect.h curl_memory.h &
-  select.h url.h multiif.h sockaddr.h inet_ntop.h sslgen.h memdebug.h
-$(OBJ_DIR)\llist.obj: llist.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h llist.h curl_memory.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h memdebug.h
-$(OBJ_DIR)\hash.obj: hash.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h hash.h llist.h &
-  ..\include\curl\mprintf.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h curl_memory.h &
-  ..\include\curl\curl.h memdebug.h
-$(OBJ_DIR)\multi.obj: multi.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h transfer.h url.h connect.h progress.h &
-  easyif.h multiif.h sendf.h http.h ..\include\curl\mprintf.h curl_memory.h &
-  memdebug.h
-$(OBJ_DIR)\content_encoding.obj: content_encoding.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\share.obj: share.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h share.h curl_memory.h memdebug.h
-$(OBJ_DIR)\http_digest.obj: http_digest.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  urldata.h cookie.h ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  rawstr.h curl_base64.h curl_md5.h http_digest.h strtok.h url.h curl_memory.h &
-  easyif.h ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\md5.obj: md5.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h curl_md5.h
-$(OBJ_DIR)\http_negotiate.obj: http_negotiate.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\http_ntlm.obj: http_ntlm.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  urldata.h cookie.h ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h easyif.h &
-  sendf.h rawstr.h curl_base64.h http_ntlm.h url.h curl_memory.h ssluse.h &
-  ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\inet_pton.obj: inet_pton.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  inet_pton.h
-$(OBJ_DIR)\strtoofft.obj: strtoofft.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  strtoofft.h
-$(OBJ_DIR)\strerror.obj: strerror.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  strerror.h urldata.h cookie.h formdata.h timeval.h http_chunks.h &
-  hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  ..\include\curl\mprintf.h
-$(OBJ_DIR)\hostares.obj: hostares.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h multiif.h inet_pton.h connect.h select.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\hostasyn.obj: hostasyn.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\hostip4.obj: hostip4.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h inet_pton.h ..\include\curl\mprintf.h curl_memory.h &
-  memdebug.h
-$(OBJ_DIR)\hostip6.obj: hostip6.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h inet_pton.h connect.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\hostsyn.obj: hostsyn.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\hostthre.obj: hostthre.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h multiif.h inet_pton.h &
-  ..\include\curl\mprintf.h inet_ntop.h curl_memory.h memdebug.h
-$(OBJ_DIR)\inet_ntop.obj: inet_ntop.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\mprintf.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h inet_ntop.h
-$(OBJ_DIR)\parsedate.obj: parsedate.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h rawstr.h parsedate.h
-$(OBJ_DIR)\select.obj: select.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h connect.h select.h
-$(OBJ_DIR)\gtls.obj: gtls.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\sslgen.obj: sslgen.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sslgen.h &
-  ssluse.h gtls.h nssg.h qssl.h sendf.h rawstr.h url.h curl_memory.h &
-  progress.h memdebug.h
-$(OBJ_DIR)\tftp.obj: tftp.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  transfer.h sendf.h tftp.h progress.h connect.h strerror.h sockaddr.h &
-  url.h ..\include\curl\mprintf.h curl_memory.h select.h memdebug.h
-$(OBJ_DIR)\splay.obj: splay.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h splay.h
-$(OBJ_DIR)\strdup.obj: strdup.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strdup.h
-$(OBJ_DIR)\socks.obj: socks.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  strequal.h select.h connect.h socks.h memdebug.h
-$(OBJ_DIR)\ssh.obj: ssh.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\nss.obj: nss.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  url.h connect.h strequal.h select.h sslgen.h ..\include\curl\mprintf.h
-$(OBJ_DIR)\qssl.obj: qssl.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\nonblock.obj: nonblock.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h nonblock.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h
-$(OBJ_DIR)\rawstr.obj: rawstr.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h rawstr.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h
-$(OBJ_DIR)\curl_addrinfo.obj: curl_addrinfo.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h curl_addrinfo.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\curl_rand.obj: curl_rand.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h curl_rand.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\curl_memrchr.obj: curl_memrchr.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h curl_memrchr.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\imap.obj: imap.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h imap.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\pop3.obj: pop3.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h pop3.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\smtp.obj: smtp.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h smtp.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\pingpong.obj: pingpong.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h pingpong.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h

lib/Makefile.am

@@ -37,13 +37,17 @@ EXTRA_DIST = Makefile.b32 Makefile.m32 Makefile.vc6 Makefile.riscos $(DSP) \
  Makefile.netware nwlib.c nwos.c libcurl.imp msvcproj.head msvcproj.foot   \
  config-win32ce.h config-os400.h setup-os400.h config-symbian.h		   \
  Makefile.Watcom config-tpf.h $(DOCS) $(VCPROJ) mk-ca-bundle.pl		   \
- firefox-db2pem.sh $(CMAKE_DIST) config-vxworks.h Makefile.vxworks
+ mk-ca-bundle.vbs firefox-db2pem.sh $(CMAKE_DIST) config-vxworks.h	   \
+ Makefile.vxworks
 
 CLEANFILES = $(DSP) $(VCPROJ)
 
 lib_LTLIBRARIES = libcurl.la
 LIBCURL_LIBS = @LIBCURL_LIBS@
 
+# This might hold -Werror
+CFLAGS += @CURL_CFLAG_EXTRAS@
+
 # Specify our include paths here, and do it relative to $(top_srcdir) and
 # $(top_builddir), to ensure that these paths which belong to the library
 # being currently built and tested are searched before the library which

lib/Makefile.inc

@@ -1,28 +1,40 @@
 # ./lib/Makefile.inc
+# Using the backslash as line continuation character might be problematic
+# with some make flavours, as Watcom's wmake showed us already. If we
+# ever want to change this in a portable manner then we should consider
+# this idea (posted to the libcurl list by Adam Kellas):
+# CSRC1 = file1.c file2.c file3.c
+# CSRC2 = file4.c file5.c file6.c
+# CSOURCES = $(CSRC1) $(CSRC2)
 
 CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	\
   cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c	\
   ldap.c ssluse.c version.c getenv.c escape.c mprintf.c telnet.c	\
   netrc.c getinfo.c transfer.c strequal.c easy.c security.c krb4.c	\
-  krb5.c memdebug.c http_chunks.c strtok.c connect.c llist.c hash.c	\
-  multi.c content_encoding.c share.c http_digest.c md5.c curl_rand.c	\
+  curl_fnmatch.c fileinfo.c ftplistparser.c wildcard.c krb5.c		\
+  memdebug.c http_chunks.c strtok.c connect.c llist.c hash.c multi.c	\
+  content_encoding.c share.c http_digest.c md4.c md5.c curl_rand.c	\
   http_negotiate.c http_ntlm.c inet_pton.c strtoofft.c strerror.c	\
   hostares.c hostasyn.c hostip4.c hostip6.c hostsyn.c hostthre.c	\
   inet_ntop.c parsedate.c select.c gtls.c sslgen.c tftp.c splay.c	\
   strdup.c socks.c ssh.c nss.c qssl.c rawstr.c curl_addrinfo.c		\
   socks_gssapi.c socks_sspi.c curl_sspi.c slist.c nonblock.c		\
   curl_memrchr.c imap.c pop3.c smtp.c pingpong.c rtsp.c curl_threads.c	\
-  warnless.c
+  warnless.c hmac.c polarssl.c curl_rtmp.c openldap.c curl_gethostname.c\
+  gopher.c
 
 HHEADERS = arpa_telnet.h netrc.h file.h timeval.h qssl.h hostip.h	\
   progress.h formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h	\
   if2ip.h speedcheck.h urldata.h curl_ldap.h ssluse.h escape.h telnet.h	\
   getinfo.h strequal.h krb4.h memdebug.h http_chunks.h curl_rand.h	\
-  strtok.h connect.h llist.h hash.h content_encoding.h share.h		\
+  curl_fnmatch.h wildcard.h fileinfo.h ftplistparser.h strtok.h		\
+  connect.h llist.h hash.h content_encoding.h share.h curl_md4.h	\
   curl_md5.h http_digest.h http_negotiate.h http_ntlm.h inet_pton.h	\
   strtoofft.h strerror.h inet_ntop.h curlx.h curl_memory.h setup.h	\
   transfer.h select.h easyif.h multiif.h parsedate.h sslgen.h gtls.h	\
   tftp.h sockaddr.h splay.h strdup.h setup_once.h socks.h ssh.h nssg.h	\
   curl_base64.h rawstr.h curl_addrinfo.h curl_sspi.h slist.h nonblock.h	\
   curl_memrchr.h imap.h pop3.h smtp.h pingpong.h rtsp.h curl_threads.h	\
-  warnless.h
+  warnless.h curl_hmac.h polarssl.h curl_rtmp.h curl_gethostname.h      \
+  gopher.h
+

lib/Makefile.m32

@@ -1,13 +1,13 @@
 #########################################################################
 #
 ## Makefile for building libcurl.a with MingW32 (GCC-3.2 or later)
-## and optionally OpenSSL (0.9.8), libssh2 (1.1), zlib (1.2.3)
+## and optionally OpenSSL (0.9.8), libssh2 (1.2), zlib (1.2.5)
 ##
 ## Usage:
-## mingw32-make -f Makefile.m32 [SSL=1] [SSH2=1] [ZLIB=1] [IDN=1] [SSPI=1] [IPV6=1] [LDAPS=1] [DYN=1]
+## mingw32-make -f Makefile.m32 [SSL=1] [SSH2=1] [ZLIB=1] [IDN=1] [SSPI=1] [IPV6=1] [LDAPS=1] [RTMP=1] [DYN=1]
 ##
 ## Hint: you can also set environment vars to control the build, f.e.:
-## set ZLIB_PATH=c:/zlib-1.2.3
+## set ZLIB_PATH=c:/zlib-1.2.5
 ## set ZLIB=1
 ##
 ## Comments to: Troy Engel <tengel@sonic.net> or
@@ -16,20 +16,24 @@
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../zlib-1.2.4
+ZLIB_PATH = ../../zlib-1.2.5
 endif
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.8n
+OPENSSL_PATH = ../../openssl-0.9.8o
 endif
 # Edit the path below to point to the base of your LibSSH2 package.
 ifndef LIBSSH2_PATH
-LIBSSH2_PATH = ../../libssh2-1.2.4
+LIBSSH2_PATH = ../../libssh2-1.2.7
 endif
 # Edit the path below to point to the base of your libidn package.
 ifndef LIBIDN_PATH
 LIBIDN_PATH = ../../libidn-1.18
 endif
+# Edit the path below to point to the base of your librtmp package.
+ifndef LIBRTMP_PATH
+LIBRTMP_PATH = ../../librtmp-2.3
+endif
 # Edit the path below to point to the base of your Novell LDAP NDK.
 ifndef LDAP_SDK
 LDAP_SDK = c:/novell/ndk/cldapsdk/win32
@@ -47,7 +51,7 @@ LDFLAGS = -s
 RANLIB = ranlib
 RC = windres
 RCFLAGS = --include-dir=../include -DDEBUGBUILD=0 -O COFF -i
-RM = del /q /f > NUL 2>&1
+RM = del /q /f 2>NUL
 STRIP = strip -g
 
 ########################################################
@@ -61,6 +65,11 @@ ifdef ARES
   DLL_LIBS += -L$(LIBCARES_PATH) -lcares
   libcurl_dll_DEPENDENCIES = $(LIBCARES_PATH)/libcares.a
 endif
+ifdef RTMP
+  INCLUDES += -I"$(LIBRTMP_PATH)"
+  CFLAGS += -DUSE_LIBRTMP
+  DLL_LIBS += -L"$(LIBRTMP_PATH)/librtmp" -lrtmp -lwinmm
+endif
 ifdef SSH2
   INCLUDES += -I"$(LIBSSH2_PATH)/include" -I"$(LIBSSH2_PATH)/win32"
   CFLAGS += -DUSE_LIBSSH2 -DHAVE_LIBSSH2_H
@@ -148,7 +157,7 @@ $(libcurl_dll_LIBRARY): $(libcurl_a_OBJECTS) $(RESOURCE) $(libcurl_dll_DEPENDENC
 clean:
 	-$(RM) $(libcurl_a_OBJECTS) $(RESOURCE)
 
-distrib: clean
+distclean vclean: clean
 	-$(RM) $(libcurl_a_LIBRARY) $(libcurl_dll_LIBRARY) $(libcurl_dll_a_LIBRARY)
 
 FORCE: ;
@@ -156,4 +165,3 @@ FORCE: ;
 $(LIBCARES_PATH)/libcares.a:
 	$(MAKE) -C $(LIBCARES_PATH) -f Makefile.m32
 
-

lib/Makefile.netware

@@ -14,17 +14,17 @@ endif
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../zlib-1.2.4
+ZLIB_PATH = ../../zlib-1.2.5
 endif
 
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.8n
+OPENSSL_PATH = ../../openssl-0.9.8o
 endif
 
 # Edit the path below to point to the base of your LibSSH2 package.
 ifndef LIBSSH2_PATH
-LIBSSH2_PATH = ../../libssh2-1.2.4
+LIBSSH2_PATH = ../../libssh2-1.2.7
 endif
 
 # Edit the path below to point to the base of your libidn package.
@@ -32,6 +32,11 @@ ifndef LIBIDN_PATH
 LIBIDN_PATH = ../../libidn-1.18
 endif
 
+# Edit the path below to point to the base of your librtmp package.
+ifndef LIBRTMP_PATH
+LIBRTMP_PATH = ../../librtmp-2.3
+endif
+
 # Edit the path below to point to the base of your c-ares package.
 ifndef LIBCARES_PATH
 LIBCARES_PATH = ../ares
@@ -84,14 +89,13 @@ else
 	CC = gcc
 endif
 PERL	= perl
-# a native win32 awk can be downloaded from here:
+# Here you can find a native Win32 binary of the original awk:
 # http://www.gknw.net/development/prgtools/awk-20070501.zip
 AWK	= awk
-YACC	= bison -y
 CP	= cp -afv
 MKDIR	= mkdir
 # RM	= rm -f
-# if you want to mark the target as MTSAFE you will need a tool for
+# If you want to mark the target as MTSAFE you will need a tool for
 # generating the xdc data for the linker; here's a minimal tool:
 # http://www.gknw.net/development/prgtools/mkxdc.zip
 MPKXDC	= mkxdc
@@ -117,13 +121,13 @@ CFLAGS	+= -relax_pointers
 #CFLAGS	+= -w on
 ifeq ($(LIBARCH),LIBC)
 ifeq ($(POSIXFL),1)
-	PRELUDE = $(SDK_LIBC)/imports/posixpre.o
+	PRELUDE = $(NDK_LIBC)/imports/posixpre.o
 else
-	PRELUDE = $(SDK_LIBC)/imports/libcpre.o
+	PRELUDE = $(NDK_LIBC)/imports/libcpre.o
 endif
 	CFLAGS += -align 4
 else
-	# PRELUDE = $(SDK_CLIB)/imports/clibpre.o
+	# PRELUDE = $(NDK_CLIB)/imports/clibpre.o
 	# to avoid the __init_* / __deinit_* whoes dont use prelude from NDK
 	PRELUDE = "$(MWCW_PATH)/libraries/runtime/prelude.obj"
 	# CFLAGS += -include "$(MWCW_PATH)/headers/nlm_clib_prefix.h"
@@ -140,12 +144,12 @@ CFLAGS	+= -fno-builtin -fpcc-struct-return -fno-strict-aliasing
 CFLAGS	+= -Wall # -pedantic
 ifeq ($(LIBARCH),LIBC)
 ifeq ($(POSIXFL),1)
-	PRELUDE = $(SDK_LIBC)/imports/posixpre.gcc.o
+	PRELUDE = $(NDK_LIBC)/imports/posixpre.gcc.o
 else
-	PRELUDE = $(SDK_LIBC)/imports/libcpre.gcc.o
+	PRELUDE = $(NDK_LIBC)/imports/libcpre.gcc.o
 endif
 else
-	PRELUDE = $(SDK_CLIB)/imports/clibpre.gcc.o
+	PRELUDE = $(NDK_CLIB)/imports/clibpre.gcc.o
 	# to avoid the __init_* / __deinit_* whoes dont use prelude from NDK
 	# http://www.gknw.net/development/mk_nlm/gcc_pre.zip
 	# PRELUDE = $(NDK_ROOT)/pre/prelude.o
@@ -154,9 +158,15 @@ endif
 endif
 
 NDK_ROOT = $(NDKBASE)/ndk
-SDK_CLIB = $(NDK_ROOT)/nwsdk
-SDK_LIBC = $(NDK_ROOT)/libc
-SDK_LDAP = $(NDK_ROOT)/cldapsdk/netware
+ifndef NDK_CLIB
+NDK_CLIB = $(NDK_ROOT)/nwsdk
+endif
+ifndef NDK_LIBC
+NDK_LIBC = $(NDK_ROOT)/libc
+endif
+ifndef NDK_LDAP
+NDK_LDAP = $(NDK_ROOT)/cldapsdk/netware
+endif
 CURL_INC = ../include
 CURL_LIB = ../lib
 
@@ -175,6 +185,10 @@ else
 	IMPORTS += @$(LIBSSH2_PATH)/nw/libssh2.imp
 endif
 endif
+ifdef WITH_RTMP
+	INCLUDES += -I$(LIBRTMP_PATH)
+	LDLIBS += $(LIBRTMP_PATH)/librtmp/librtmp.$(LIBEXT)
+endif
 ifdef WITH_SSL
 	INCLUDES += -I$(OPENSSL_PATH)/outinc_nw_$(LIBARCH_L)
 	LDLIBS += $(OPENSSL_PATH)/out_nw_$(LIBARCH_L)/ssl.$(LIBEXT)
@@ -197,17 +211,17 @@ ifdef WITH_IDN
 endif
 
 ifeq ($(LIBARCH),LIBC)
-	INCLUDES += -I$(SDK_LIBC)/include
-	# INCLUDES += -I$(SDK_LIBC)/include/nks
-	# INCLUDES += -I$(SDK_LIBC)/include/winsock
+	INCLUDES += -I$(NDK_LIBC)/include
+	# INCLUDES += -I$(NDK_LIBC)/include/nks
+	# INCLUDES += -I$(NDK_LIBC)/include/winsock
 	CFLAGS += -D_POSIX_SOURCE
 else
-	INCLUDES += -I$(SDK_CLIB)/include/nlm
-	# INCLUDES += -I$(SDK_CLIB)/include/nlm/obsolete
-	# INCLUDES += -I$(SDK_CLIB)/include
+	INCLUDES += -I$(NDK_CLIB)/include/nlm
+	# INCLUDES += -I$(NDK_CLIB)/include/nlm/obsolete
+	# INCLUDES += -I$(NDK_CLIB)/include
 endif
 ifndef DISABLE_LDAP
-	INCLUDES += -I$(SDK_LDAP)/$(LIBARCH_L)/inc
+	INCLUDES += -I$(NDK_LDAP)/$(LIBARCH_L)/inc
 endif
 CFLAGS	+= $(INCLUDES)
 
@@ -269,7 +283,7 @@ clean:
 	-$(RM) curl_config.h
 	-$(RM) -r $(OBJDIR)
 
-distclean: clean
+distclean vclean: clean
 	-$(RM) $(TARGET).$(LIBEXT) $(TARGET).nlm
 	-$(RM) certdata.txt ca-bundle.crt
 
@@ -323,15 +337,15 @@ endif
 ifeq ($(LIBARCH),CLIB)
 	@echo $(DL)start _Prelude$(DL) >> $@
 	@echo $(DL)exit _Stop$(DL) >> $@
-	@echo $(DL)import @$(SDK_CLIB)/imports/clib.imp$(DL) >> $@
-	@echo $(DL)import @$(SDK_CLIB)/imports/threads.imp$(DL) >> $@
-	@echo $(DL)import @$(SDK_CLIB)/imports/nlmlib.imp$(DL) >> $@
-	@echo $(DL)import @$(SDK_CLIB)/imports/socklib.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_CLIB)/imports/clib.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_CLIB)/imports/threads.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_CLIB)/imports/nlmlib.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_CLIB)/imports/socklib.imp$(DL) >> $@
 	@echo $(DL)module clib$(DL) >> $@
 ifndef DISABLE_LDAP
-	@echo $(DL)import @$(SDK_LDAP)/clib/imports/ldapsdk.imp$(DL) >> $@
-	@echo $(DL)import @$(SDK_LDAP)/clib/imports/ldapssl.imp$(DL) >> $@
-#	@echo $(DL)import @$(SDK_LDAP)/clib/imports/ldapx.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_LDAP)/clib/imports/ldapsdk.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_LDAP)/clib/imports/ldapssl.imp$(DL) >> $@
+#	@echo $(DL)import @$(NDK_LDAP)/clib/imports/ldapx.imp$(DL) >> $@
 	@echo $(DL)module ldapsdk ldapssl$(DL) >> $@
 endif
 else
@@ -348,13 +362,13 @@ else
 	@echo $(DL)exit _LibCPostlude$(DL) >> $@
 	@echo $(DL)check _LibCCheckUnload$(DL) >> $@
 endif
-	@echo $(DL)import @$(SDK_LIBC)/imports/libc.imp$(DL) >> $@
-	@echo $(DL)import @$(SDK_LIBC)/imports/netware.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_LIBC)/imports/libc.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_LIBC)/imports/netware.imp$(DL) >> $@
 	@echo $(DL)module libc$(DL) >> $@
 ifndef DISABLE_LDAP
-	@echo $(DL)import @$(SDK_LDAP)/libc/imports/lldapsdk.imp$(DL) >> $@
-	@echo $(DL)import @$(SDK_LDAP)/libc/imports/lldapssl.imp$(DL) >> $@
-#	@echo $(DL)import @$(SDK_LDAP)/libc/imports/lldapx.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_LDAP)/libc/imports/lldapsdk.imp$(DL) >> $@
+	@echo $(DL)import @$(NDK_LDAP)/libc/imports/lldapssl.imp$(DL) >> $@
+#	@echo $(DL)import @$(NDK_LDAP)/libc/imports/lldapx.imp$(DL) >> $@
 	@echo $(DL)module lldapsdk lldapssl$(DL) >> $@
 endif
 endif
@@ -425,13 +439,6 @@ else
 	@echo $(DL)#define HAVE_SYS_PARAM_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_SYS_SELECT_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_TERMIOS_H 1$(DL) >> $@
-	@echo $(DL)#define HAVE_AF_INET6 1$(DL) >> $@
-	@echo $(DL)#define HAVE_PF_INET6 1$(DL) >> $@
-	@echo $(DL)#define HAVE_FREEADDRINFO 1$(DL) >> $@
-	@echo $(DL)#define HAVE_GETADDRINFO 1$(DL) >> $@
-	@echo $(DL)#define HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID 1$(DL) >> $@
-	@echo $(DL)#define HAVE_STRUCT_IN6_ADDR 1$(DL) >> $@
-	@echo $(DL)#define HAVE_STRUCT_SOCKADDR_IN6 1$(DL) >> $@
 	@echo $(DL)#define RECV_TYPE_ARG1 int$(DL) >> $@
 	@echo $(DL)#define RECV_TYPE_ARG2 void *$(DL) >> $@
 	@echo $(DL)#define RECV_TYPE_ARG3 size_t$(DL) >> $@
@@ -451,11 +458,19 @@ else
 	@echo $(DL)#define SEND_TYPE_ARG3 size_t$(DL) >> $@
 	@echo $(DL)#define SEND_TYPE_ARG4 int$(DL) >> $@
 	@echo $(DL)#define SEND_TYPE_RETV ssize_t$(DL) >> $@
-	@echo $(DL)#define SIZEOF_STRUCT_IN6_ADDR 16$(DL) >> $@
 	@echo $(DL)#define SIZEOF_OFF_T 8$(DL) >> $@
 	@echo $(DL)#define _LARGEFILE 1$(DL) >> $@
 ifdef ENABLE_IPV6
 	@echo $(DL)#define ENABLE_IPV6 1$(DL) >> $@
+	@echo $(DL)#define HAVE_AF_INET6 1$(DL) >> $@
+	@echo $(DL)#define HAVE_PF_INET6 1$(DL) >> $@
+	@echo $(DL)#define HAVE_FREEADDRINFO 1$(DL) >> $@
+	@echo $(DL)#define HAVE_GETADDRINFO 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRUCT_ADDRINFO 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRUCT_IN6_ADDR 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRUCT_SOCKADDR_IN6 1$(DL) >> $@
+	@echo $(DL)#define SIZEOF_STRUCT_IN6_ADDR 16$(DL) >> $@
 endif
 endif
 	@echo $(DL)#define USE_MANUAL 1$(DL) >> $@
@@ -491,7 +506,6 @@ endif
 	@echo $(DL)#define HAVE_STRFTIME 1$(DL) >> $@
 	@echo $(DL)#define HAVE_STRING_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_STRSTR 1$(DL) >> $@
-	@echo $(DL)#define HAVE_STRUCT_ADDRINFO 1$(DL) >> $@
 	@echo $(DL)#define HAVE_STRUCT_TIMEVAL 1$(DL) >> $@
 	@echo $(DL)#define HAVE_SYS_IOCTL_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_SYS_STAT_H 1$(DL) >> $@
@@ -555,6 +569,9 @@ endif
 ifdef WITH_IDN
 	@echo $(DL)#define HAVE_LIBIDN 1$(DL) >> $@
 	@echo $(DL)#define HAVE_TLD_H 1$(DL) >> $@
+endif
+ifdef WITH_RTMP
+	@echo $(DL)#define USE_LIBRTMP 1$(DL) >> $@
 endif
 	@echo $(DL)#ifdef __GNUC__$(DL) >> $@
 	@echo $(DL)#define HAVE_VARIADIC_MACROS_GCC 1$(DL) >> $@
@@ -616,6 +633,9 @@ $(CURL_INC)/curl/curlbuild.h: Makefile.netware FORCE
 	@echo $(DL)** Do not edit this file - it is created by make!$(DL) >> $@
 	@echo $(DL)** All your changes will be lost!!$(DL) >> $@
 	@echo $(DL)*/$(DL) >> $@
+	@echo $(DL)#ifndef NETWARE$(DL) >> $@
+	@echo $(DL)#error This $(notdir $@) is created for NetWare platform!$(DL) >> $@
+	@echo $(DL)#endif$(DL) >> $@
 	@echo $(DL)#ifndef __CURL_CURLBUILD_H$(DL) >> $@
 	@echo $(DL)#define __CURL_CURLBUILD_H$(DL) >> $@
 ifeq ($(LIBARCH),LIBC)

lib/Makefile.riscos

@@ -1,21 +1,21 @@
 # Makefile for project libcurl
-# Generated on Sun,13 Jan 2002.16:57:00 by EasyGCC (0.1.3 [beta 2] (3 Jan 2002))
-# Contact: easygcc@melotech.co.uk
 
 # Project objects:
 objs =	o.base64 o.connect o.cookie o.dict \
 	o.dllinit o.easy o.escape o.file \
-	o.formdata o.ftp o.getenv \
+	o.formdata o.ftp o.getenv o.gopher \
 	o.getinfo o.getpass o.hostip \
 	o.hostip4 o.hostsyn o.http \
 	o.http_chunks o.inet_ntop o.inet_pton o.if2ip o.krb4 o.ldap \
+	o.curl_fnmatch o.fileinfo o.ftplistparser o.wildcard \
 	o.memdebug o.mprintf o.netrc o.parsedate o.progress \
 	o.security o.select o.sendf o.speedcheck o.ssluse \
 	o.strequal o.strtok o.telnet o.timeval \
 	o.transfer o.url o.version o.strtoofft o.sslgen o.gtls \
 	o.rawstr o.curl_addrinfo o.slist o.nonblock o.curl_rand \
 	o.curl_memrchr o.imap o.pop3 o.smtp o.pingpong o.rtsp \
-	o.curl_threads o.warnless
+	o.curl_threads o.warnless o.hmac o.md5 o.curl_rtmp \
+	o.openldap o.polarssl o.md4 o.curl_gethostname
 
 
 # Compile options:
@@ -39,12 +39,18 @@ o.cookie:	c.cookie
 o.curl_addrinfo:	c.curl_addrinfo
 		gcc $(compileropts) -c -o curl_addrinfo.o c.curl_addrinfo
 
+o.curl_gethostname:	c.curl_gethostname
+		gcc $(compileropts) -c -o curl_gethostname.o c.curl_gethostname
+
 o.curl_memrchr:	c.curl_memrchr
 		gcc $(compileropts) -c -o curl_memrchr.o c.curl_memrchr
 
 o.curl_rand:	c.curl_rand
 		gcc $(compileropts) -c -o curl_rand.o c.curl_rand
 
+o.curl_rtmp:	c.curl_rtmp
+		gcc $(compileropts) -c -o curl_rtmp.o c.curl_rtmp
+
 o.curl_threads:	c.curl_threads
 		gcc $(compileropts) -c -o curl_threads.o c.curl_threads
 
@@ -78,6 +84,12 @@ o.getinfo:	c.getinfo
 o.getpass:	c.getpass
 		gcc $(compileropts) -c -o getpass.o c.getpass
 
+o.gopher:	c.gopher
+		gcc $(compileropts) -c -o gopher.o c.gopher
+
+o.hmac:		c.hmac
+		gcc $(compileropts) -c -o hmac.o c.hmac
+
 o.hostip:	c.hostip
 		gcc $(compileropts) -c -o hostip.o c.hostip
 
@@ -111,6 +123,12 @@ o.krb4:	c.krb4
 o.ldap:	c.ldap
 		gcc $(compileropts) -IOpenLDAP: -c -o ldap.o c.ldap
 
+o.md4:		c.md4
+		gcc $(compileropts) -c -o md4.o c.md4
+
+o.md5:		c.md5
+		gcc $(compileropts) -c -o md5.o c.md5
+
 o.memdebug:	c.memdebug
 		gcc $(compileropts) -c -o memdebug.o c.memdebug
 
@@ -120,12 +138,18 @@ o.mprintf:	c.mprintf
 o.netrc:	c.netrc
 		gcc $(compileropts) -c -o netrc.o c.netrc
 
+o.openldap:	c.openldap
+		gcc $(compileropts) -c -o openldap.o c.openldap
+
 o.parsedate:	c.parsedate
 		gcc $(compileropts) -c -o parsedate.o c.parsedate
 
 o.pingpong:	c.pingpong
 		gcc $(compileropts) -c -o pingpong.o c.pingpong
 
+o.polarssl:	c.polarssl
+		gcc $(compileropts) -c -o polarssl.o c.polarssl
+
 o.pop3:		c.pop3
 		gcc $(compileropts) -c -o pop3.o c.pop3
 
@@ -194,3 +218,15 @@ o.version:	c.version
 
 o.warnless:	c.warnless
 		gcc $(compileropts) -c -o warnless.o c.warnless
+
+o.curl_fnmatch:	c.curl_fnmatch
+		gcc $(compileropts) -c -o curl_fnmatch.o c.curl_fnmatch
+
+o.fileinfo:	c.fileinfo
+		gcc $(compileropts) -c -o fileinfo.o c.fileinfo
+
+o.ftplistparser:	c.ftplistparser
+		gcc $(compileropts) -c -o ftplistparser.o c.ftplistparser
+
+o.wildcard:	c.wildcard
+		gcc $(compileropts) -c -o wildcard.o c.wildcard

lib/Makefile.vc6

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1999 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1999 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -18,7 +18,6 @@
 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 # KIND, either express or implied.
 #
-# $Id: Makefile.am,v 1.139 2008-11-03 08:50:58 bagder Exp $
 ###########################################################################
 #
 # Makefile for building libcurl with MSVC6
@@ -55,11 +54,11 @@ IMPLIB_NAME       = libcurl_imp
 IMPLIB_NAME_DEBUG = libcurld_imp
 
 !IFNDEF OPENSSL_PATH
-OPENSSL_PATH   = ../../openssl-0.9.8g
+OPENSSL_PATH   = ../../openssl-0.9.8o
 !ENDIF
 
 !IFNDEF ZLIB_PATH
-ZLIB_PATH  = ../../zlib-1.2.3
+ZLIB_PATH  = ../../zlib-1.2.5
 !ENDIF
 
 !IFNDEF MACHINE
@@ -101,7 +100,7 @@ LFLAGS     = /nologo /machine:$(MACHINE)
 SSLLIBS    = libeay32.lib ssleay32.lib
 ZLIBLIBSDLL= zdll.lib
 ZLIBLIBS   = zlib.lib
-WINLIBS    = wsock32.lib wldap32.lib
+WINLIBS    = ws2_32.lib wldap32.lib
 CFLAGS     = $(CFLAGS)
 
 CFGSET     = FALSE
@@ -110,6 +109,10 @@ CFGSET     = FALSE
 CFLAGS = $(CFLAGS) /DUSE_WINDOWS_SSPI /I$(WINDOWS_SDK_PATH)\include
 !ENDIF
 
+!IFDEF USE_IPV6
+CFLAGS = $(CFLAGS) /DUSE_IPV6
+!ENDIF
+
 ##############################################################
 # Runtime library configuration
 
@@ -450,46 +453,56 @@ X_OBJS= \
 	$(DIROBJ)\content_encoding.obj \
 	$(DIROBJ)\cookie.obj \
 	$(DIROBJ)\curl_addrinfo.obj \
+	$(DIROBJ)\curl_fnmatch.obj \
+	$(DIROBJ)\curl_gethostname.obj \
 	$(DIROBJ)\curl_memrchr.obj \
 	$(DIROBJ)\curl_rand.obj \
+	$(DIROBJ)\curl_rtmp.obj \
 	$(DIROBJ)\curl_sspi.obj \
 	$(DIROBJ)\curl_threads.obj \
 	$(DIROBJ)\dict.obj \
 	$(DIROBJ)\easy.obj \
 	$(DIROBJ)\escape.obj \
+	$(DIROBJ)\fileinfo.obj \
 	$(DIROBJ)\file.obj \
 	$(DIROBJ)\formdata.obj \
+	$(DIROBJ)\ftplistparser.obj \
 	$(DIROBJ)\ftp.obj \
 	$(DIROBJ)\getenv.obj \
 	$(DIROBJ)\getinfo.obj \
 	$(DIROBJ)\gtls.obj \
+	$(DIROBJ)\gopher.obj \
 	$(DIROBJ)\hash.obj \
+	$(DIROBJ)\hmac.obj \
 	$(DIROBJ)\hostares.obj \
 	$(DIROBJ)\hostasyn.obj \
-	$(DIROBJ)\hostip.obj \
 	$(DIROBJ)\hostip4.obj \
 	$(DIROBJ)\hostip6.obj \
+	$(DIROBJ)\hostip.obj \
 	$(DIROBJ)\hostsyn.obj \
 	$(DIROBJ)\hostthre.obj \
-	$(DIROBJ)\http.obj \
 	$(DIROBJ)\http_chunks.obj \
 	$(DIROBJ)\http_digest.obj \
 	$(DIROBJ)\http_negotiate.obj \
 	$(DIROBJ)\http_ntlm.obj \
+	$(DIROBJ)\http.obj \
 	$(DIROBJ)\if2ip.obj \
 	$(DIROBJ)\imap.obj \
 	$(DIROBJ)\inet_ntop.obj \
 	$(DIROBJ)\inet_pton.obj \
 	$(DIROBJ)\ldap.obj \
 	$(DIROBJ)\llist.obj \
+	$(DIROBJ)\md4.obj \
 	$(DIROBJ)\md5.obj \
 	$(DIROBJ)\memdebug.obj \
 	$(DIROBJ)\mprintf.obj \
 	$(DIROBJ)\multi.obj \
 	$(DIROBJ)\netrc.obj \
         $(DIROBJ)\nonblock.obj \
+	$(DIROBJ)\openldap.obj \
 	$(DIROBJ)\parsedate.obj \
 	$(DIROBJ)\pingpong.obj \
+	$(DIROBJ)\polarssl.obj \
 	$(DIROBJ)\pop3.obj \
 	$(DIROBJ)\progress.obj \
 	$(DIROBJ)\rawstr.obj \
@@ -499,8 +512,8 @@ X_OBJS= \
 	$(DIROBJ)\share.obj \
 	$(DIROBJ)\slist.obj \
 	$(DIROBJ)\smtp.obj \
-	$(DIROBJ)\socks.obj \
 	$(DIROBJ)\socks_gssapi.obj \
+	$(DIROBJ)\socks.obj \
 	$(DIROBJ)\socks_sspi.obj \
 	$(DIROBJ)\speedcheck.obj \
 	$(DIROBJ)\splay.obj \
@@ -518,6 +531,7 @@ X_OBJS= \
 	$(DIROBJ)\url.obj \
 	$(DIROBJ)\version.obj \
 	$(DIROBJ)\warnless.obj \
+	$(DIROBJ)\wildcard.obj \
 	$(RESOURCE)
 
 all : $(TARGET)

lib/README.ares

@@ -11,7 +11,7 @@ c-ares:
   http://c-ares.haxx.se/
 
 NOTE
-  The latest libcurl version requires c-ares 1.4.0 or later.
+  The latest libcurl version requires c-ares 1.6.0 or later.
 
   Once upon the time libcurl built fine with the "original" ares. That is no
   longer true. You need to use c-ares.

lib/config-symbian.h

@@ -48,10 +48,7 @@
 /* to enable hidden symbols */
 /*#define CURL_HIDDEN_SYMBOLS 1*/
 
-/* W$ LDAP with non-W$ compiler */
-/* #undef CURL_LDAP_HYBRID */
-
-/* Use W$ LDAP implementation */
+/* Use Windows LDAP implementation */
 /* #undef CURL_LDAP_WIN */
 
 /* when not building a shared library */

lib/config-vxworks.h

@@ -59,10 +59,7 @@
 /* to enable hidden symbols */
 /* #undef CURL_HIDDEN_SYMBOLS */
 
-/* W$ LDAP with non-W$ compiler */
-/* #undef CURL_LDAP_HYBRID */
-
-/* Use W$ LDAP implementation */
+/* Use Windows LDAP implementation */
 /* #undef CURL_LDAP_WIN */
 
 /* when not building a shared library */

lib/config-win32.h

@@ -504,6 +504,10 @@
 #  define USE_WIN32_LARGE_FILES
 #endif
 
+#if defined(__WATCOMC__) && !defined(USE_WIN32_LARGE_FILES)
+#  define USE_WIN32_LARGE_FILES
+#endif
+
 #if defined(__POCC__)
 #  undef USE_WIN32_LARGE_FILES
 #endif
@@ -535,20 +539,24 @@
 /* ---------------------------------------------------------------- */
 
 #if defined(CURL_HAS_NOVELL_LDAPSDK) || defined(CURL_HAS_MOZILLA_LDAPSDK)
-#undef CURL_LDAP_HYBRID
 #undef CURL_LDAP_WIN
 #define HAVE_LDAP_SSL_H 1
 #define HAVE_LDAP_URL_PARSE 1
 #elif defined(CURL_HAS_OPENLDAP_LDAPSDK)
-#undef CURL_LDAP_HYBRID
 #undef CURL_LDAP_WIN
 #define HAVE_LDAP_URL_PARSE 1
 #else
-#undef CURL_LDAP_HYBRID
 #undef HAVE_LDAP_URL_PARSE
 #define CURL_LDAP_WIN 1
 #endif
 
+#if defined(__WATCOMC__) && defined(CURL_LDAP_WIN)
+#if __WATCOMC__ < 1280
+#define WINBERAPI  __declspec(cdecl)
+#define WINLDAPAPI __declspec(cdecl)
+#endif
+#endif
+
 #if defined(__POCC__) && defined(CURL_LDAP_WIN)
 #  define CURL_DISABLE_LDAP 1
 #endif
@@ -572,7 +580,7 @@
 /* Name of package */
 #define PACKAGE "curl"
 
-#if defined(__POCC__)
+#if defined(__POCC__) || (USE_IPV6)
 #  define ENABLE_IPV6 1
 #endif
 

lib/config-win32ce.h

@@ -379,7 +379,6 @@
 /* ---------------------------------------------------------------- */
 
 #define CURL_LDAP_WIN 1
-#undef CURL_LDAP_HYBRID
 #undef HAVE_LDAP_URL_PARSE
 
 /* ---------------------------------------------------------------- */

lib/connect.c

@@ -112,10 +112,11 @@ struct Curl_sockaddr_ex {
 
 static bool verifyconnect(curl_socket_t sockfd, int *error);
 
-static curl_socket_t
+static CURLcode
 singleipconnect(struct connectdata *conn,
                 const Curl_addrinfo *ai, /* start connecting to this */
                 long timeout_ms,
+                curl_socket_t *sock,
                 bool *connected);
 
 /*
@@ -173,6 +174,9 @@ long Curl_timeleft(struct connectdata *conn,
 
   /* substract elapsed time */
   timeout_ms -= Curl_tvdiff(*nowp, data->progress.t_startsingle);
+  if(!timeout_ms)
+    /* avoid returning 0 as that means no timeout! */
+    return -1;
 
   return timeout_ms;
 }
@@ -180,16 +184,13 @@ long Curl_timeleft(struct connectdata *conn,
 /*
  * waitconnect() waits for a TCP connect on the given socket for the specified
  * number if milliseconds. It returns:
- * 0    fine connect
- * -1   select() error
- * 1    select() timeout
- * 2    select() returned with an error condition fd_set
  */
 
 #define WAITCONN_CONNECTED     0
 #define WAITCONN_SELECT_ERROR -1
 #define WAITCONN_TIMEOUT       1
 #define WAITCONN_FDSET_ERROR   2
+#define WAITCONN_ABORTED       3
 
 static
 int waitconnect(struct connectdata *conn,
@@ -209,9 +210,8 @@ int waitconnect(struct connectdata *conn,
     /* now select() until we get connect or timeout */
     rc = Curl_socket_ready(CURL_SOCKET_BAD, sockfd, (int)(timeout_msec>1000?
                                                           1000:timeout_msec));
-
     if(Curl_pgrsUpdate(conn))
-      return CURLE_ABORTED_BY_CALLBACK;
+      return WAITCONN_ABORTED;
 
     if(-1 == rc)
       /* error, no connect here, try next */
@@ -492,37 +492,130 @@ static bool verifyconnect(curl_socket_t sockfd, int *error)
 
 /* Used within the multi interface. Try next IP address, return TRUE if no
    more address exists or error */
-static bool trynextip(struct connectdata *conn,
+static CURLcode trynextip(struct connectdata *conn,
                           int sockindex,
                           bool *connected)
 {
   curl_socket_t sockfd;
   Curl_addrinfo *ai;
 
-  /* first close the failed socket */
-  sclose(conn->sock[sockindex]);
+  /* First clean up after the failed socket.
+     Don't close it yet to ensure that the next IP's socket gets a different
+     file descriptor, which can prevent bugs when the curl_multi_socket_action
+     interface is used with certain select() replacements such as kqueue. */
+  curl_socket_t fd_to_close = conn->sock[sockindex];
   conn->sock[sockindex] = CURL_SOCKET_BAD;
   *connected = FALSE;
 
-  if(sockindex != FIRSTSOCKET)
-    return TRUE; /* no next */
+  if(sockindex != FIRSTSOCKET) {
+    sclose(fd_to_close);
+    return CURLE_COULDNT_CONNECT; /* no next */
+  }
 
   /* try the next address */
   ai = conn->ip_addr->ai_next;
 
   while(ai) {
-    sockfd = singleipconnect(conn, ai, 0L, connected);
+    CURLcode res = singleipconnect(conn, ai, 0L, &sockfd, connected);
+    if(res)
+      return res;
     if(sockfd != CURL_SOCKET_BAD) {
       /* store the new socket descriptor */
       conn->sock[sockindex] = sockfd;
       conn->ip_addr = ai;
-      return FALSE;
+      sclose(fd_to_close);
+      return CURLE_OK;
     }
     ai = ai->ai_next;
   }
+  sclose(fd_to_close);
+  return CURLE_COULDNT_CONNECT;
+}
+
+/* retrieves ip address and port from a sockaddr structure */
+static bool getaddressinfo(struct sockaddr* sa, char* addr,
+                           long* port)
+{
+  unsigned short us_port;
+  struct sockaddr_in* si = NULL;
+#ifdef ENABLE_IPV6
+  struct sockaddr_in6* si6 = NULL;
+#endif
+
+  switch (sa->sa_family) {
+    case AF_INET:
+      si = (struct sockaddr_in*) sa;
+      if(Curl_inet_ntop(sa->sa_family, &si->sin_addr,
+                        addr, MAX_IPADR_LEN) == NULL)
+        return FALSE;
+      us_port = ntohs(si->sin_port);
+      *port = us_port;
+      break;
+#ifdef ENABLE_IPV6
+    case AF_INET6:
+      si6 = (struct sockaddr_in6*)sa;
+      if(Curl_inet_ntop(sa->sa_family, &si6->sin6_addr,
+                        addr, MAX_IPADR_LEN) == NULL)
+        return FALSE;
+      us_port = ntohs(si6->sin6_port);
+      *port = us_port;
+      break;
+#endif
+    default:
+      addr[0] = '\0';
+      *port = 0;
+  }
   return TRUE;
 }
 
+/* retrieves the start/end point information of a socket of an established
+   connection */
+void Curl_updateconninfo(struct connectdata *conn, curl_socket_t sockfd)
+{
+  int error;
+  curl_socklen_t len;
+  struct Curl_sockaddr_storage ssrem;
+  struct Curl_sockaddr_storage ssloc;
+  struct SessionHandle *data = conn->data;
+  struct PureInfo *info = &conn->data->info;
+
+  if(conn->bits.reuse)
+    /* reusing same connection */
+    return;
+
+  len = sizeof(struct Curl_sockaddr_storage);
+  if(getpeername(sockfd, (struct sockaddr*) &ssrem, &len)) {
+    error = SOCKERRNO;
+    failf(data, "getpeername() failed with errno %d: %s",
+          error, Curl_strerror(conn, error));
+    return;
+  }
+
+  len = sizeof(struct Curl_sockaddr_storage);
+  if(getsockname(sockfd, (struct sockaddr*) &ssloc, &len)) {
+    error = SOCKERRNO;
+    failf(data, "getsockname() failed with errno %d: %s",
+          error, Curl_strerror(conn, error));
+    return;
+  }
+
+  if(!getaddressinfo((struct sockaddr*)&ssrem,
+                      info->ip, &info->port)) {
+    error = ERRNO;
+    failf(data, "ssrem inet_ntop() failed with errno %d: %s",
+          error, Curl_strerror(conn, error));
+    return;
+  }
+
+  if(!getaddressinfo((struct sockaddr*)&ssloc,
+                     info->localip, &info->localport)) {
+    error = ERRNO;
+    failf(data, "ssloc inet_ntop() failed with errno %d: %s",
+          error, Curl_strerror(conn, error));
+    return;
+  }
+}
+
 /*
  * Curl_is_connected() is used from the multi interface to check if the
  * firstsocket has connected.
@@ -537,6 +630,7 @@ CURLcode Curl_is_connected(struct connectdata *conn,
   CURLcode code = CURLE_OK;
   curl_socket_t sockfd = conn->sock[sockindex];
   long allow = DEFAULT_CONNECT_TIMEOUT;
+  int error = 0;
 
   DEBUGASSERT(sockindex >= FIRSTSOCKET && sockindex <= SECONDARYSOCKET);
 
@@ -544,13 +638,6 @@ CURLcode Curl_is_connected(struct connectdata *conn,
 
   if(conn->bits.tcpconnect) {
     /* we are connected already! */
-    long allow_total = 0;
-
-    /* subtract the most strict timeout of the ones */
-    if(data->set.timeout)
-      allow_total = data->set.timeout;
-
-    Curl_expire(data, allow_total);
     *connected = TRUE;
     return CURLE_OK;
   }
@@ -564,52 +651,52 @@ CURLcode Curl_is_connected(struct connectdata *conn,
     return CURLE_OPERATION_TIMEDOUT;
   }
 
-  Curl_expire(data, allow);
-
   /* check for connect without timeout as we want to return immediately */
   rc = waitconnect(conn, sockfd, 0);
+  if(WAITCONN_TIMEOUT == rc)
+    /* not an error, but also no connection yet */
+    return code;
 
   if(WAITCONN_CONNECTED == rc) {
-    int error;
     if(verifyconnect(sockfd, &error)) {
       /* we are connected, awesome! */
       conn->bits.tcpconnect = TRUE;
       *connected = TRUE;
+      Curl_pgrsTime(data, TIMER_CONNECT); /* connect done */
+      Curl_verboseconnect(conn);
+      Curl_updateconninfo(conn, sockfd);
+
       return CURLE_OK;
     }
     /* nope, not connected for real */
-    data->state.os_errno = error;
-    infof(data, "Connection failed\n");
-    if(trynextip(conn, sockindex, connected)) {
-      failf(data, "Failed connect to %s:%ld; %s",
-            conn->host.name, conn->port, Curl_strerror(conn, error));
-      code = CURLE_COULDNT_CONNECT;
   }
-  }
-  else if(WAITCONN_TIMEOUT != rc) {
-    int error = 0;
-
+  else {
     /* nope, not connected  */
     if(WAITCONN_FDSET_ERROR == rc) {
       (void)verifyconnect(sockfd, &error);
-      data->state.os_errno = error;
-      infof(data, "%s\n",Curl_strerror(conn,error));
+      infof(data, "%s\n",Curl_strerror(conn, error));
     }
     else
       infof(data, "Connection failed\n");
+  }
 
-    if(trynextip(conn, sockindex, connected)) {
+  /*
+   * The connection failed here, we should attempt to connect to the "next
+   * address" for the given host. But first remember the latest error.
+   */
+  if(error) {
+    data->state.os_errno = error;
+    SET_SOCKERRNO(error);
+  }
+
+  code = trynextip(conn, sockindex, connected);
+
+  if(code) {
     error = SOCKERRNO;
     data->state.os_errno = error;
     failf(data, "Failed connect to %s:%ld; %s",
           conn->host.name, conn->port, Curl_strerror(conn, error));
-      code = CURLE_COULDNT_CONNECT;
   }
-  }
-  /*
-   * If the connection failed here, we should attempt to connect to the "next
-   * address" for the given host.
-   */
 
   return code;
 }
@@ -691,12 +778,20 @@ void Curl_sndbufset(curl_socket_t sockfd)
 #endif
 
 
-/* singleipconnect() connects to the given IP only, and it may return without
-   having connected if used from the multi interface. */
-static curl_socket_t
+/*
+ * singleipconnect()
+ *
+ * Note that even on connect fail it returns CURLE_OK, but with 'sock' set to
+ * CURL_SOCKET_BAD. Other errors will however return proper errors.
+ *
+ * singleipconnect() connects to the given IP only, and it may return without
+ * having connected if used from the multi interface.
+ */
+static CURLcode
 singleipconnect(struct connectdata *conn,
                 const Curl_addrinfo *ai,
                 long timeout_ms,
+                curl_socket_t *sockp,
                 bool *connected)
 {
   struct Curl_sockaddr_ex addr;
@@ -706,13 +801,15 @@ singleipconnect(struct connectdata *conn,
   bool isconnected;
   struct SessionHandle *data = conn->data;
   curl_socket_t sockfd;
-  CURLcode res;
+  CURLcode res = CURLE_OK;
   const void *iptoprint;
   struct sockaddr_in * const sa4 = (void *)&addr.sa_addr;
 #ifdef ENABLE_IPV6
   struct sockaddr_in6 * const sa6 = (void *)&addr.sa_addr;
 #endif
 
+  *sockp = CURL_SOCKET_BAD;
+
   /*
    * The Curl_sockaddr_ex structure is basically libcurl's external API
    * curl_sockaddr structure with enough space available to directly hold
@@ -751,7 +848,7 @@ singleipconnect(struct connectdata *conn,
 
   if(sockfd == CURL_SOCKET_BAD)
     /* no socket, no connection */
-    return CURL_SOCKET_BAD;
+    return CURLE_OK;
 
 #if defined(ENABLE_IPV6) && defined(HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID)
   if (conn->scope && (addr.family == AF_INET6))
@@ -804,7 +901,7 @@ singleipconnect(struct connectdata *conn,
                                CURLSOCKTYPE_IPCXN);
     if(error) {
       sclose(sockfd); /* close the socket and bail out */
-      return CURL_SOCKET_BAD;
+      return res;
     }
   }
 
@@ -812,7 +909,7 @@ singleipconnect(struct connectdata *conn,
   res = bindlocal(conn, sockfd, addr.family);
   if(res) {
     sclose(sockfd); /* close socket and bail out */
-    return CURL_SOCKET_BAD;
+    return res;
   }
 
   /* set socket non-blocking */
@@ -840,6 +937,10 @@ singleipconnect(struct connectdata *conn,
 #endif
 #endif
       rc = waitconnect(conn, sockfd, timeout_ms);
+      if(WAITCONN_ABORTED == rc) {
+        sclose(sockfd);
+        return CURLE_ABORTED_BY_CALLBACK;
+      }
       break;
     default:
       /* unknown error, fallthrough and try another address! */
@@ -855,7 +956,8 @@ singleipconnect(struct connectdata *conn,
   if((WAITCONN_TIMEOUT == rc) &&
      (data->state.used_interface == Curl_if_multi)) {
     /* Timeout when running the multi interface */
-    return sockfd;
+    *sockp = sockfd;
+    return CURLE_OK;
   }
 
   isconnected = verifyconnect(sockfd, &error);
@@ -864,7 +966,9 @@ singleipconnect(struct connectdata *conn,
     /* we are connected, awesome! */
     *connected = TRUE; /* this is a true connect */
     infof(data, "connected\n");
-    return sockfd;
+    Curl_updateconninfo(conn, sockfd);
+    *sockp = sockfd;
+    return CURLE_OK;
   }
   else if(WAITCONN_TIMEOUT == rc)
     infof(data, "Timeout\n");
@@ -876,7 +980,7 @@ singleipconnect(struct connectdata *conn,
   /* connect failed or timed out */
   sclose(sockfd);
 
-  return CURL_SOCKET_BAD;
+  return CURLE_OK;
 }
 
 /*
@@ -918,7 +1022,6 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
     failf(data, "Connection time-out");
     return CURLE_OPERATION_TIMEDOUT;
   }
-  Curl_expire(data, timeout_ms);
 
   /* Max time for each address */
   num_addr = Curl_num_addresses(remotehost->addr);
@@ -941,7 +1044,11 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
        curr_addr = curr_addr->ai_next, aliasindex++) {
 
     /* start connecting to the IP curr_addr points to */
-    sockfd = singleipconnect(conn, curr_addr, timeout_per_addr, connected);
+    CURLcode res =
+      singleipconnect(conn, curr_addr, timeout_per_addr, &sockfd, connected);
+
+    if(res)
+      return res;
 
     if(sockfd != CURL_SOCKET_BAD)
       break;
@@ -979,12 +1086,12 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
  * Used to extract socket and connectdata struct for the most recent
  * transfer on the given SessionHandle.
  *
- * The socket 'long' will be -1 in case of failure!
+ * The returned socket will be CURL_SOCKET_BAD in case of failure!
  */
-CURLcode Curl_getconnectinfo(struct SessionHandle *data,
-                             long *param_longp,
+curl_socket_t Curl_getconnectinfo(struct SessionHandle *data,
                                   struct connectdata **connp)
 {
+  curl_socket_t sockfd;
   if((data->state.lastconnect != -1) &&
      (data->state.connc->connects[data->state.lastconnect] != NULL)) {
     struct connectdata *c =
@@ -992,13 +1099,13 @@ CURLcode Curl_getconnectinfo(struct SessionHandle *data,
     if(connp)
       /* only store this if the caller cares for it */
       *connp = c;
-    *param_longp = c->sock[FIRSTSOCKET];
+    sockfd = c->sock[FIRSTSOCKET];
     /* we have a socket connected, let's determine if the server shut down */
     /* determine if ssl */
     if(c->ssl[FIRSTSOCKET].use) {
       /* use the SSL context */
       if(!Curl_ssl_check_cxn(c))
-        *param_longp = -1;   /* FIN received */
+        return CURL_SOCKET_BAD;   /* FIN received */
     }
 /* Minix 3.1 doesn't support any flags on recv; just assume socket is OK */
 #ifdef MSG_PEEK
@@ -1007,13 +1114,13 @@ CURLcode Curl_getconnectinfo(struct SessionHandle *data,
       char buf;
       if(recv((RECV_TYPE_ARG1)c->sock[FIRSTSOCKET], (RECV_TYPE_ARG2)&buf,
               (RECV_TYPE_ARG3)1, (RECV_TYPE_ARG4)MSG_PEEK) == 0) {
-        *param_longp = -1;   /* FIN received */
+        return CURL_SOCKET_BAD;   /* FIN received */
       }
     }
 #endif
   }
   else
-    *param_longp = -1;
+    return CURL_SOCKET_BAD;
 
-  return CURLE_OK;
+  return sockfd;
 }

lib/connect.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -47,10 +47,9 @@ long Curl_timeleft(struct connectdata *conn,
  * Used to extract socket and connectdata struct for the most recent
  * transfer on the given SessionHandle.
  *
- * The socket 'long' will be -1 in case of failure!
+ * The returned socket will be CURL_SOCKET_BAD in case of failure!
  */
-CURLcode Curl_getconnectinfo(struct SessionHandle *data,
-                             long *param_longp,
+curl_socket_t Curl_getconnectinfo(struct SessionHandle *data,
                                   struct connectdata **connp);
 
 #ifdef WIN32
@@ -68,4 +67,6 @@ void Curl_sndbufset(curl_socket_t sockfd);
 #define Curl_sndbufset(y)
 #endif
 
+void Curl_updateconninfo(struct connectdata *conn, curl_socket_t sockfd);
+
 #endif

lib/content_encoding.c

@@ -103,7 +103,7 @@ inflate_stream(struct connectdata *conn,
     status = inflate(z, Z_SYNC_FLUSH);
     if(status == Z_OK || status == Z_STREAM_END) {
       allow_restart = 0;
-      if(DSIZ - z->avail_out) {
+      if((DSIZ - z->avail_out) && (!k->ignorebody)) {
         result = Curl_client_write(conn, CLIENTWRITE_BODY, decomp,
                                    DSIZ - z->avail_out);
         /* if !CURLE_OK, clean up, return */
@@ -123,7 +123,9 @@ inflate_stream(struct connectdata *conn,
       }
 
       /* Done with these bytes, exit */
-      if(status == Z_OK && z->avail_in == 0) {
+
+      /* status is always Z_OK at this point! */
+      if(z->avail_in == 0) {
         free(decomp);
         return result;
       }
@@ -247,7 +249,6 @@ static enum {
 
     /* Skip over the NUL */
     --len;
-    ++data;
   }
 
   if(flags & HEAD_CRC) {
@@ -255,7 +256,6 @@ static enum {
       return GZIP_UNDERFLOW;
 
     len -= 2;
-    data += 2;
   }
 
   *headerlen = totallen - len;

lib/curl_addrinfo.c

@@ -151,7 +151,10 @@ Curl_getaddrinfo_ex(const char *nodename,
     ca->ai_next      = NULL;
 
     if((ai->ai_addrlen > 0) && (ai->ai_addr != NULL)) {
-      ca->ai_addrlen  = ai->ai_addrlen;
+      /* typecast below avoid warning on at least win64:
+         conversion from 'size_t' to 'curl_socklen_t', possible loss of data
+      */
+      ca->ai_addrlen  = (curl_socklen_t)ai->ai_addrlen;
       if((ca->ai_addr = malloc(ca->ai_addrlen)) == NULL) {
         error = EAI_MEMORY;
         free(ca);

lib/curl_config.h.cmake

@@ -58,10 +58,7 @@
 /* to enable hidden symbols */
 #cmakedefine CURL_HIDDEN_SYMBOLS ${CURL_HIDDEN_SYMBOLS}
 
-/* W$ LDAP with non-W$ compiler */
-#cmakedefine CURL_LDAP_HYBRID ${CURL_LDAP_HYBRID}
-
-/* Use W$ LDAP implementation */
+/* Use Windows LDAP implementation */
 #cmakedefine CURL_LDAP_WIN ${CURL_LDAP_WIN}
 
 /* when not building a shared library */
@@ -889,6 +886,9 @@
 /* if GnuTLS is enabled */
 #cmakedefine USE_GNUTLS ${USE_GNUTLS}
 
+/* if PolarSSL is enabled */
+#cmakedefine USE_POLARSSL ${USE_POLARSSL}
+
 /* if libSSH2 is in use */
 #cmakedefine USE_LIBSSH2 ${USE_LIBSSH2}
 

lib/curl_fnmatch.c

@@ -0,0 +1,424 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include "setup.h"
+
+#include "curl_fnmatch.h"
+
+#define _MPRINTF_REPLACE /* use our functions only */
+#include <curl/mprintf.h>
+
+#include "curl_memory.h"
+/* The last #include file should be: */
+#include "memdebug.h"
+
+#define CURLFNM_CHARSET_LEN (sizeof(char) * 256)
+#define CURLFNM_CHSET_SIZE (CURLFNM_CHARSET_LEN + 15)
+
+#define CURLFNM_NEGATE  CURLFNM_CHARSET_LEN
+
+#define CURLFNM_ALNUM   (CURLFNM_CHARSET_LEN + 1)
+#define CURLFNM_DIGIT   (CURLFNM_CHARSET_LEN + 2)
+#define CURLFNM_XDIGIT  (CURLFNM_CHARSET_LEN + 3)
+#define CURLFNM_ALPHA   (CURLFNM_CHARSET_LEN + 4)
+#define CURLFNM_PRINT   (CURLFNM_CHARSET_LEN + 5)
+#define CURLFNM_BLANK   (CURLFNM_CHARSET_LEN + 6)
+#define CURLFNM_LOWER   (CURLFNM_CHARSET_LEN + 7)
+#define CURLFNM_GRAPH   (CURLFNM_CHARSET_LEN + 8)
+#define CURLFNM_SPACE   (CURLFNM_CHARSET_LEN + 9)
+#define CURLFNM_UPPER   (CURLFNM_CHARSET_LEN + 10)
+
+typedef enum {
+  CURLFNM_LOOP_DEFAULT = 0,
+  CURLFNM_LOOP_BACKSLASH
+} loop_state;
+
+typedef enum {
+  CURLFNM_SCHS_DEFAULT = 0,
+  CURLFNM_SCHS_MAYRANGE,
+  CURLFNM_SCHS_MAYRANGE2,
+  CURLFNM_SCHS_RIGHTBR,
+  CURLFNM_SCHS_RIGHTBRLEFTBR
+} setcharset_state;
+
+typedef enum {
+  CURLFNM_PKW_INIT = 0,
+  CURLFNM_PKW_DDOT
+} parsekey_state;
+
+#define SETCHARSET_OK     1
+#define SETCHARSET_FAIL   0
+
+static int parsekeyword(unsigned char **pattern, unsigned char *charset)
+{
+  parsekey_state state = CURLFNM_PKW_INIT;
+#define KEYLEN 10
+  char keyword[KEYLEN] = { 0 };
+  int found = FALSE;
+  int i;
+  unsigned char *p = *pattern;
+  for(i = 0; !found; i++) {
+    char c = *p++;
+    if(i >= KEYLEN)
+      return SETCHARSET_FAIL;
+    switch(state) {
+    case CURLFNM_PKW_INIT:
+      if(ISALPHA(c) && ISLOWER(c))
+        keyword[i] = c;
+      else if(c == ':')
+        state = CURLFNM_PKW_DDOT;
+      else
+        return 0;
+      break;
+    case CURLFNM_PKW_DDOT:
+      if(c == ']')
+        found = TRUE;
+      else
+        return SETCHARSET_FAIL;
+    }
+  }
+#undef KEYLEN
+
+  *pattern = p; /* move caller's pattern pointer */
+  if(strcmp(keyword, "digit") == 0)
+    charset[CURLFNM_DIGIT] = 1;
+  else if(strcmp(keyword, "alnum") == 0)
+    charset[CURLFNM_ALNUM] = 1;
+  else if(strcmp(keyword, "alpha") == 0)
+    charset[CURLFNM_ALPHA] = 1;
+  else if(strcmp(keyword, "xdigit") == 0)
+    charset[CURLFNM_XDIGIT] = 1;
+  else if(strcmp(keyword, "print") == 0)
+    charset[CURLFNM_PRINT] = 1;
+  else if(strcmp(keyword, "graph") == 0)
+    charset[CURLFNM_GRAPH] = 1;
+  else if(strcmp(keyword, "space") == 0)
+    charset[CURLFNM_SPACE] = 1;
+  else if(strcmp(keyword, "blank") == 0)
+    charset[CURLFNM_BLANK] = 1;
+  else if(strcmp(keyword, "upper") == 0)
+    charset[CURLFNM_UPPER] = 1;
+  else if(strcmp(keyword, "lower") == 0)
+    charset[CURLFNM_LOWER] = 1;
+  else
+    return SETCHARSET_FAIL;
+  return SETCHARSET_OK;
+}
+
+/* returns 1 (true) if pattern is OK, 0 if is bad ("p" is pattern pointer) */
+static int setcharset(unsigned char **p, unsigned char *charset)
+{
+  setcharset_state state = CURLFNM_SCHS_DEFAULT;
+  unsigned char rangestart = 0;
+  unsigned char lastchar   = 0;
+  bool something_found = FALSE;
+  unsigned char c;
+  for(;;) {
+    c = **p;
+    switch(state) {
+    case CURLFNM_SCHS_DEFAULT:
+      if(ISALNUM(c)) { /* ASCII value */
+        rangestart = c;
+        charset[c] = 1;
+        (*p)++;
+        state = CURLFNM_SCHS_MAYRANGE;
+        something_found = TRUE;
+      }
+      else if(c == ']') {
+        if(something_found)
+          return SETCHARSET_OK;
+        else
+          something_found = TRUE;
+        state = CURLFNM_SCHS_RIGHTBR;
+        charset[c] = 1;
+        (*p)++;
+      }
+      else if(c == '[') {
+        char c2 = *((*p)+1);
+        if(c2 == ':') { /* there has to be a keyword */
+          (*p) += 2;
+          if(parsekeyword(p, charset)) {
+            state = CURLFNM_SCHS_DEFAULT;
+          }
+          else
+            return SETCHARSET_FAIL;
+        }
+        else {
+          charset[c] = 1;
+          (*p)++;
+        }
+        something_found = TRUE;
+      }
+      else if(c == '?' || c == '*') {
+        something_found = TRUE;
+        charset[c] = 1;
+        (*p)++;
+      }
+      else if(c == '^' || c == '!') {
+        if(!something_found) {
+          if(charset[CURLFNM_NEGATE]) {
+            charset[c] = 1;
+            something_found = TRUE;
+          }
+          else
+            charset[CURLFNM_NEGATE] = 1; /* negate charset */
+        }
+        else
+          charset[c] = 1;
+        (*p)++;
+      }
+      else if(c == '\\') {
+        c = *(++(*p));
+        if(ISPRINT((c))) {
+          something_found = TRUE;
+          state = CURLFNM_SCHS_MAYRANGE;
+          charset[c] = 1;
+          rangestart = c;
+          (*p)++;
+        }
+        else
+          return SETCHARSET_FAIL;
+      }
+      else if(c == '\0') {
+        return SETCHARSET_FAIL;
+      }
+      else {
+        charset[c] = 1;
+        (*p)++;
+        something_found = TRUE;
+      }
+      break;
+    case CURLFNM_SCHS_MAYRANGE:
+      if(c == '-') {
+        charset[c] = 1;
+        (*p)++;
+        lastchar = '-';
+        state = CURLFNM_SCHS_MAYRANGE2;
+      }
+      else if(c == '[') {
+        state = CURLFNM_SCHS_DEFAULT;
+      }
+      else if(ISALNUM(c)) {
+        charset[c] = 1;
+        (*p)++;
+      }
+      else if(c == '\\') {
+        c = *(++(*p));
+        if(ISPRINT(c)) {
+          charset[c] = 1;
+          (*p)++;
+        }
+        else
+          return SETCHARSET_FAIL;
+      }
+      else if(c == ']') {
+        return SETCHARSET_OK;
+      }
+      else
+        return SETCHARSET_FAIL;
+      break;
+    case CURLFNM_SCHS_MAYRANGE2:
+      if(c == '\\') {
+        c = *(++(*p));
+        if(!ISPRINT(c))
+          return SETCHARSET_FAIL;
+      }
+      if(c == ']') {
+        return SETCHARSET_OK;
+      }
+      else if(c == '\\') {
+        c = *(++(*p));
+        if(ISPRINT(c)) {
+          charset[c] = 1;
+          state = CURLFNM_SCHS_DEFAULT;
+          (*p)++;
+        }
+        else
+          return SETCHARSET_FAIL;
+      }
+      if(c >= rangestart) {
+        if((ISLOWER(c) && ISLOWER(rangestart)) ||
+           (ISDIGIT(c) && ISDIGIT(rangestart)) ||
+           (ISUPPER(c) && ISUPPER(rangestart))) {
+          charset[lastchar] = 0;
+          rangestart++;
+          while(rangestart++ <= c)
+            charset[rangestart-1] = 1;
+          (*p)++;
+          state = CURLFNM_SCHS_DEFAULT;
+        }
+        else
+          return SETCHARSET_FAIL;
+      }
+      break;
+    case CURLFNM_SCHS_RIGHTBR:
+      if(c == '[') {
+        state = CURLFNM_SCHS_RIGHTBRLEFTBR;
+        charset[c] = 1;
+        (*p)++;
+      }
+      else if(c == ']') {
+        return SETCHARSET_OK;
+      }
+      else if(c == '\0') {
+        return SETCHARSET_FAIL;
+      }
+      else if(ISPRINT(c)) {
+        charset[c] = 1;
+        (*p)++;
+        state = CURLFNM_SCHS_DEFAULT;
+      }
+      else
+        /* used 'goto fail' instead of 'return SETCHARSET_FAIL' to avoid a
+         * nonsense warning 'statement not reached' at end of the fnc when
+         * compiling on Solaris */
+        goto fail;
+      break;
+    case CURLFNM_SCHS_RIGHTBRLEFTBR:
+      if(c == ']') {
+        return SETCHARSET_OK;
+      }
+      else {
+        state  = CURLFNM_SCHS_DEFAULT;
+        charset[c] = 1;
+        (*p)++;
+      }
+      break;
+    }
+  }
+fail:
+  return SETCHARSET_FAIL;
+}
+
+static int loop(const unsigned char *pattern, const unsigned char *string)
+{
+  loop_state state = CURLFNM_LOOP_DEFAULT;
+  unsigned char *p = (unsigned char *)pattern;
+  unsigned char *s = (unsigned char *)string;
+  unsigned char charset[CURLFNM_CHSET_SIZE] = { 0 };
+  int rc = 0;
+
+  for (;;) {
+    switch(state) {
+    case CURLFNM_LOOP_DEFAULT:
+      if(*p == '*') {
+        while(*(p+1) == '*') /* eliminate multiple stars */
+          p++;
+        if(*s == '\0' && *(p+1) == '\0')
+          return CURL_FNMATCH_MATCH;
+        rc = loop(p + 1, s); /* *.txt matches .txt <=> .txt matches .txt */
+        if(rc == CURL_FNMATCH_MATCH)
+          return CURL_FNMATCH_MATCH;
+        if(*s) /* let the star eat up one character */
+          s++;
+        else
+          return CURL_FNMATCH_NOMATCH;
+      }
+      else if(*p == '?') {
+        if(ISPRINT(*s)) {
+          s++;
+          p++;
+        }
+        else if(*s == '\0')
+          return CURL_FNMATCH_NOMATCH;
+        else
+          return CURL_FNMATCH_FAIL; /* cannot deal with other character */
+      }
+      else if(*p == '\0') {
+        if(*s == '\0')
+          return CURL_FNMATCH_MATCH;
+        else
+          return CURL_FNMATCH_NOMATCH;
+      }
+      else if(*p == '\\') {
+        state = CURLFNM_LOOP_BACKSLASH;
+        p++;
+      }
+      else if(*p == '[') {
+        unsigned char *pp = p+1; /* cannot handle with pointer to register */
+        if(setcharset(&pp, charset)) {
+          int found = FALSE;
+          if(charset[(unsigned int)*s])
+            found = TRUE;
+          else if(charset[CURLFNM_ALNUM])
+            found = ISALNUM(*s);
+          else if(charset[CURLFNM_ALPHA])
+            found = ISALPHA(*s);
+          else if(charset[CURLFNM_DIGIT])
+            found = ISDIGIT(*s);
+          else if(charset[CURLFNM_XDIGIT])
+            found = ISXDIGIT(*s);
+          else if(charset[CURLFNM_PRINT])
+            found = ISPRINT(*s);
+          else if(charset[CURLFNM_SPACE])
+            found = ISSPACE(*s);
+          else if(charset[CURLFNM_UPPER])
+            found = ISUPPER(*s);
+          else if(charset[CURLFNM_LOWER])
+            found = ISLOWER(*s);
+          else if(charset[CURLFNM_BLANK])
+            found = ISBLANK(*s);
+          else if(charset[CURLFNM_GRAPH])
+            found = ISGRAPH(*s);
+
+          if(charset[CURLFNM_NEGATE])
+            found = !found;
+
+          if(found) {
+            p = pp+1;
+            s++;
+            memset(charset, 0, CURLFNM_CHSET_SIZE);
+          }
+          else
+            return CURL_FNMATCH_NOMATCH;
+        }
+        else
+          return CURL_FNMATCH_FAIL;
+      }
+      else {
+        if(*p++ != *s++)
+          return CURL_FNMATCH_NOMATCH;
+      }
+      break;
+    case CURLFNM_LOOP_BACKSLASH:
+      if(ISPRINT(*p)) {
+        if(*p++ == *s++)
+          state = CURLFNM_LOOP_DEFAULT;
+        else
+          return CURL_FNMATCH_NOMATCH;
+      }
+      else
+        return CURL_FNMATCH_FAIL;
+      break;
+    }
+  }
+}
+
+int Curl_fnmatch(void *ptr, const char *pattern, const char *string)
+{
+  (void)ptr; /* the argument is specified by the curl_fnmatch_callback
+                prototype, but not used by Curl_fnmatch() */
+  if(!pattern || !string) {
+    return CURL_FNMATCH_FAIL;
+  }
+  return loop((unsigned char *)pattern, (unsigned char *)string);
+}

lib/curl_fnmatch.h

@@ -0,0 +1,44 @@
+#ifndef HEADER_CURL_FNMATCH_H
+#define HEADER_CURL_FNMATCH_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#define CURL_FNMATCH_MATCH    0
+#define CURL_FNMATCH_NOMATCH  1
+#define CURL_FNMATCH_FAIL     2
+
+/* default pattern matching function
+ * =================================
+ * Implemented with recursive backtracking, if you want to use Curl_fnmatch,
+ * please note that there is not implemented UTF/UNICODE support.
+ *
+ * Implemented features:
+ * '?' notation, does not match UTF characters
+ * '*' can also work with UTF string
+ * [a-zA-Z0-9] enumeration support
+ *
+ * keywords: alnum, digit, xdigit, alpha, print, blank, lower, graph, space
+ *           and upper (use as "[[:alnum:]]")
+ */
+int Curl_fnmatch(void *ptr, const char *pattern, const char *string);
+
+#endif /* HEADER_CURL_FNMATCH_H */

lib/curl_gethostname.c

@@ -0,0 +1,81 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include "setup.h"
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include "curl_gethostname.h"
+
+/*
+ * Curl_gethostname() is a wrapper around gethostname() which allows
+ * overriding the host name that the function would normally return.
+ * This capability is used by the test suite to verify exact matching
+ * of NTLM authentication, which exercises libcurl's MD4 and DES code.
+ *
+ * For libcurl debug enabled builds host name overriding takes place
+ * when environment variable CURL_GETHOSTNAME is set, using the value
+ * held by the variable to override returned host name.
+ *
+ * For libcurl shared library release builds the test suite preloads
+ * another shared library named libhostname using the LD_PRELOAD
+ * mechanism which intercepts, and might override, the gethostname()
+ * function call. In this case a given platform must support the
+ * LD_PRELOAD mechanism and additionally have environment variable
+ * CURL_GETHOSTNAME set in order to override the returned host name.
+ *
+ * For libcurl static library release builds no overriding takes place.
+ */
+
+int Curl_gethostname(char *name, GETHOSTNAME_TYPE_ARG2 namelen) {
+
+#ifndef HAVE_GETHOSTNAME
+
+  /* Allow compilation and return failure when unavailable */
+  (void) name;
+  (void) namelen;
+  return -1;
+
+#else
+
+#ifdef DEBUGBUILD
+
+  /* Override host name when environment variable CURL_GETHOSTNAME is set */
+  const char *force_hostname = getenv("CURL_GETHOSTNAME");
+  if(force_hostname) {
+    strncpy(name, force_hostname, namelen);
+    name[namelen-1] = '\0';
+    return 0;
+  }
+
+#endif /* DEBUGBUILD */
+
+  /* The call to system's gethostname() might get intercepted by the
+     libhostname library when libcurl is built as a non-debug shared
+     library when running the test suite. */
+  return gethostname(name, namelen);
+
+#endif
+
+}

lib/curl_gethostname.h

@@ -0,0 +1,27 @@
+#ifndef HEADER_CURL_GETHOSTNAME_H
+#define HEADER_CURL_GETHOSTNAME_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+int Curl_gethostname(char *name, GETHOSTNAME_TYPE_ARG2 namelen);
+
+#endif /* HEADER_CURL_GETHOSTNAME_H */

lib/curl_hmac.h

@@ -0,0 +1,67 @@
+#ifndef HEADER_CURL_HMAC_H
+#define HEADER_CURL_HMAC_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#ifndef CURL_DISABLE_CRYPTO_AUTH
+
+typedef void    (* HMAC_hinit_func)(void * context);
+typedef void    (* HMAC_hupdate_func)(void * context,
+                                      const unsigned char * data,
+                                      unsigned int len);
+typedef void    (* HMAC_hfinal_func)(unsigned char * result, void * context);
+
+
+/* Per-hash function HMAC parameters. */
+
+typedef struct {
+  HMAC_hinit_func       hmac_hinit;     /* Initialize context procedure. */
+  HMAC_hupdate_func     hmac_hupdate;   /* Update context with data. */
+  HMAC_hfinal_func      hmac_hfinal;    /* Get final result procedure. */
+  unsigned int          hmac_ctxtsize;  /* Context structure size. */
+  unsigned int          hmac_maxkeylen; /* Maximum key length (bytes). */
+  unsigned int          hmac_resultlen; /* Result length (bytes). */
+} HMAC_params;
+
+
+/* HMAC computation context. */
+
+typedef struct {
+  const HMAC_params *   hmac_hash;      /* Hash function definition. */
+  void *                hmac_hashctxt1; /* Hash function context 1. */
+  void *                hmac_hashctxt2; /* Hash function context 2. */
+} HMAC_context;
+
+
+/* Prototypes. */
+
+HMAC_context * Curl_HMAC_init(const HMAC_params * hashparams,
+                              const unsigned char * key,
+                              unsigned int keylen);
+int Curl_HMAC_update(HMAC_context * context,
+                     const unsigned char * data,
+                     unsigned int len);
+int Curl_HMAC_final(HMAC_context * context, unsigned char * result);
+
+#endif
+
+#endif /* HEADER_CURL_HMAC_H */

lib/curl_ldap.h

@@ -8,7 +8,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2007, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -25,7 +25,8 @@
 #ifndef CURL_DISABLE_LDAP
 extern const struct Curl_handler Curl_handler_ldap;
 
-#ifdef HAVE_LDAP_SSL
+#if (defined(USE_OPENLDAP) && defined(USE_SSL)) || \
+   (!defined(USE_OPENLDAP) && defined(HAVE_LDAP_SSL))
 extern const struct Curl_handler Curl_handler_ldaps;
 #endif
 

lib/curl_md4.h

@@ -0,0 +1,33 @@
+#ifndef HEADER_CURL_MD4_H
+#define HEADER_CURL_MD4_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include "setup.h"
+
+/* NSS crypto library does not provide the MD4 hash algorithm, so that we have
+ * a local implementation of it */
+#ifdef USE_NSS
+void Curl_md4it(unsigned char *output, const unsigned char *input, size_t len);
+#endif /* USE_NSS */
+
+#endif /* HEADER_CURL_MD4_H */

lib/curl_md5.h

@@ -22,7 +22,13 @@
  *
  ***************************************************************************/
 
+#ifndef CURL_DISABLE_CRYPTO_AUTH
+#include "curl_hmac.h"
+
+extern const HMAC_params Curl_HMAC_MD5[1];
+
 void Curl_md5it(unsigned char *output,
                 const unsigned char *input);
+#endif
 
 #endif /* HEADER_CURL_MD5_H */

lib/curl_rtmp.c

@@ -0,0 +1,284 @@
+/***************************************************************************
+ *                      _   _ ____  _
+ *  Project         ___| | | |  _ \| |
+ *                 / __| | | | |_) | |
+ *                | (__| |_| |  _ <| |___
+ *                 \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2010, Howard Chu, <hyc@highlandsun.com>
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include "setup.h"
+
+#ifdef USE_LIBRTMP
+
+#include "urldata.h"
+#include "nonblock.h" /* for curlx_nonblock */
+#include "progress.h" /* for Curl_pgrsSetUploadSize */
+#include "transfer.h"
+#include <curl/curl.h>
+#include <librtmp/rtmp.h>
+
+#define _MPRINTF_REPLACE /* use our functions only */
+#include <curl/mprintf.h>
+
+#include "curl_memory.h"
+/* The last #include file should be: */
+#include "memdebug.h"
+
+#ifdef _WIN32
+#define setsockopt(a,b,c,d,e) (setsockopt)(a,b,c,(const char *)d,(int)e)
+#define SET_RCVTIMEO(tv,s)   int tv = s*1000
+#else
+#define SET_RCVTIMEO(tv,s)   struct timeval tv = {s,0}
+#endif
+
+#define DEF_BUFTIME    (2*60*60*1000)    /* 2 hours */
+
+static CURLcode rtmp_setup(struct connectdata *conn);
+static CURLcode rtmp_do(struct connectdata *conn, bool *done);
+static CURLcode rtmp_done(struct connectdata *conn, CURLcode, bool premature);
+static CURLcode rtmp_connect(struct connectdata *conn, bool *done);
+static CURLcode rtmp_disconnect(struct connectdata *conn);
+
+static Curl_recv rtmp_recv;
+static Curl_send rtmp_send;
+
+/*
+ * RTMP protocol handler.h, based on http://rtmpdump.mplayerhq.hu
+ */
+
+const struct Curl_handler Curl_handler_rtmp = {
+  "RTMP",                               /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMP,                            /* defport */
+  PROT_RTMP                             /* protocol */
+};
+
+const struct Curl_handler Curl_handler_rtmpt = {
+  "RTMPT",                              /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMPT,                           /* defport */
+  PROT_RTMPT                            /* protocol */
+};
+
+const struct Curl_handler Curl_handler_rtmpe = {
+  "RTMPE",                              /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMP,                            /* defport */
+  PROT_RTMPE                            /* protocol */
+};
+
+const struct Curl_handler Curl_handler_rtmpte = {
+  "RTMPTE",                             /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMPT,                           /* defport */
+  PROT_RTMPTE                           /* protocol */
+};
+
+const struct Curl_handler Curl_handler_rtmps = {
+  "RTMPS",                              /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMPS,                           /* defport */
+  PROT_RTMPS                            /* protocol */
+};
+const struct Curl_handler Curl_handler_rtmpts = {
+  "RTMPTS",                             /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMPS,                           /* defport */
+  PROT_RTMPTS                           /* protocol */
+};
+
+static CURLcode rtmp_setup(struct connectdata *conn)
+{
+  RTMP *r = RTMP_Alloc();
+
+  if (!r)
+    return CURLE_OUT_OF_MEMORY;
+
+  RTMP_Init(r);
+  RTMP_SetBufferMS(r, DEF_BUFTIME);
+  if (!RTMP_SetupURL(r, conn->data->change.url)) {
+    RTMP_Free(r);
+    return CURLE_URL_MALFORMAT;
+  }
+  conn->proto.generic = r;
+  return CURLE_OK;
+}
+
+static CURLcode rtmp_connect(struct connectdata *conn, bool *done)
+{
+  RTMP *r = conn->proto.generic;
+  SET_RCVTIMEO(tv,10);
+
+  r->m_sb.sb_socket = conn->sock[FIRSTSOCKET];
+
+  /* We have to know if it's a write before we send the
+   * connect request packet
+   */
+  if (conn->data->set.upload)
+    r->Link.protocol |= RTMP_FEATURE_WRITE;
+
+  /* For plain streams, use the buffer toggle trick to keep data flowing */
+  if (!(r->Link.lFlags & RTMP_LF_LIVE) && !(r->Link.protocol & RTMP_FEATURE_HTTP))
+    r->Link.lFlags |= RTMP_LF_BUFX;
+
+  curlx_nonblock(r->m_sb.sb_socket, FALSE);
+  setsockopt(r->m_sb.sb_socket, SOL_SOCKET, SO_RCVTIMEO, (char *)&tv, sizeof(tv));
+
+  if (!RTMP_Connect1(r, NULL))
+    return CURLE_FAILED_INIT;
+
+  /* Clients must send a periodic BytesReceived report to the server */
+  r->m_bSendCounter = true;
+
+  *done = TRUE;
+  conn->recv[FIRSTSOCKET] = rtmp_recv;
+  conn->send[FIRSTSOCKET] = rtmp_send;
+  return CURLE_OK;
+}
+
+static CURLcode rtmp_do(struct connectdata *conn, bool *done)
+{
+  RTMP *r = conn->proto.generic;
+
+  if (!RTMP_ConnectStream(r, 0))
+    return CURLE_FAILED_INIT;
+
+  if (conn->data->set.upload) {
+    Curl_pgrsSetUploadSize(conn->data, conn->data->set.infilesize);
+    Curl_setup_transfer(conn, -1, -1, FALSE, NULL, FIRSTSOCKET, NULL);
+  } else
+    Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, NULL, -1, NULL);
+  *done = TRUE;
+  return CURLE_OK;
+}
+
+static CURLcode rtmp_done(struct connectdata *conn, CURLcode status,
+                          bool premature)
+{
+  (void)conn; /* unused */
+  (void)status; /* unused */
+  (void)premature; /* unused */
+
+  return CURLE_OK;
+}
+
+static CURLcode rtmp_disconnect(struct connectdata *conn)
+{
+  RTMP *r = conn->proto.generic;
+  if (r) {
+    conn->proto.generic = NULL;
+    RTMP_Close(r);
+    RTMP_Free(r);
+  }
+  return CURLE_OK;
+}
+
+static ssize_t rtmp_recv(struct connectdata *conn, int sockindex, char *buf,
+                         size_t len, CURLcode *err)
+{
+  RTMP *r = conn->proto.generic;
+  ssize_t nread;
+
+  (void)sockindex; /* unused */
+
+  nread = RTMP_Read(r, buf, len);
+  if (nread < 0) {
+    if (r->m_read.status == RTMP_READ_COMPLETE ||
+        r->m_read.status == RTMP_READ_EOF) {
+      conn->data->req.size = conn->data->req.bytecount;
+      nread = 0;
+    } else
+      *err = CURLE_RECV_ERROR;
+  }
+  return nread;
+}
+
+static ssize_t rtmp_send(struct connectdata *conn, int sockindex,
+                         const void *buf, size_t len, CURLcode *err)
+{
+  RTMP *r = conn->proto.generic;
+  ssize_t num;
+
+  (void)sockindex; /* unused */
+
+  num = RTMP_Write(r, (char *)buf, len);
+  if (num < 0) {
+    *err = CURLE_SEND_ERROR;
+  }
+  return num;
+}
+#endif  /* USE_LIBRTMP */