RELEASE-NOTES: mention the runtests fix as well

Due to the layout of the singletest function there are situations where
it returns before it clears the environment variables that were
especially set for the single specific test case. That could lead to
subsequent tests getting executed with environment variables sticking
around from a previous test which could lead to badness.

This change makes sure to clear all custom variables that may be laying
around from a previous round, before running a test case.

Reported by: Kamil Dudka
Bug: http://curl.haxx.se/mail/lib-2010-08/0141.html

.gitignore

@@ -5,6 +5,7 @@
 *.dll
 *.exe
 *.obj
+*.asc
 .*.swp
 Debug
 Release
@@ -26,6 +27,9 @@ curl-config
 libcurl.pc
 missing
 curl-*.tar.gz
+curl-*.tar.bz2
+curl-*.tar.lzma
+curl-*.zip
 INSTALL
 install-sh
 *.o
@@ -36,3 +40,4 @@ tags
 TAGS
 *~
 aclocal.m4.bak
+CHANGES.dist

Android.mk

@@ -2,7 +2,7 @@
 #
 # Place the curl source (including this makefile) into external/curl/ in the
 # Android source tree.  Then build them with 'make curl' or just 'make libcurl'
-# from the Android root. Tested with Android 1.5
+# from the Android root. Tested with Android 1.5 and 2.1
 #
 # Note: you must first create a curl_config.h file by running configure in the
 # Android environment. The only way I've found to do this is tricky. Perform a
@@ -12,26 +12,37 @@
 # shown. Now, from the external/curl/ directory, run curl's normal configure
 # command with flags that match what Android itself uses. This will mean
 # putting the compiler directory into the PATH, putting the -I, -isystem and
-# -D options into CPPFLAGS, putting the -m, -f, -O and -nostdlib options into
-# CFLAGS, and putting the -Wl, -L and -l options into LIBS, along with the path
-# to the files libgcc.a, crtbegin_dynamic.o, and ccrtend_android.o. Remember
-# that the paths must be absolute since you will not be running configure from
-# the same directory as the Android make.  The normal cross-compiler options
-# must also be set.
+# -D options into CPPFLAGS, putting the -W, -m, -f, -O and -nostdlib options
+# into CFLAGS, and putting the -Wl, -L and -l options into LIBS, along with the
+# path to the files libgcc.a, crtbegin_dynamic.o, and ccrtend_android.o.
+# Remember that the paths must be absolute since you will not be running
+# configure from the same directory as the Android make.  The normal
+# cross-compiler options must also be set. Note that the -c, -o, -MD and
+# similar flags must not be set.
+#
+# To see all the LIBS options, you'll need to do the "showcommands" trick on an
+# executable that's already buildable and watch what flags Android uses to link
+# it (dhcpcd is a good choice to watch). You'll also want to add -L options to
+# LIBS that point to the out/.../obj/lib/ and out/.../obj/system/lib/
+# directories so that additional libraries can be found and used by curl.
 #
 # The end result will be a configure command that looks something like this
-# (the environment variable A is set to the Android root path):
+# (the environment variable A is set to the Android root path which makes the
+# command shorter):
 #
 #  A=`realpath ../..` && \
 #  PATH="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/bin:$PATH" \
 #  ./configure --host=arm-linux CC=arm-eabi-gcc \
 #  CPPFLAGS="-I $A/system/core/include ..." \
-#  CFLAGS="-fno-exceptions -Wno-multichar ..." \
-#  LIB="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/lib/gcc/arm-eabi/X\
-#  /interwork/libgcc.a ..." \
+#  CFLAGS="-nostdlib -fno-exceptions -Wno-multichar ..." \
+#  LIBS="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/lib/gcc/arm-eabi/X\
+#  /interwork/libgcc.a ..."
+#
+# Finally, copy the file COPYING to NOTICE so that the curl license gets put
+# into the right place (but see the note about this below).
 #
 # Dan Fandrich
-# September 2009
+# August 2010
 
 LOCAL_PATH:= $(call my-dir)
 
@@ -63,6 +74,14 @@ LOCAL_COPY_HEADERS := $(addprefix include/curl/,$(CURL_HEADERS))
 
 LOCAL_MODULE:= libcurl
 
+# Copy the licence to a place where Android will find it.
+# Actually, this doesn't quite work because the build system searches
+# for NOTICE files before it gets to this point, so it will only be seen
+# on subsequent builds.
+ALL_PREBUILT += $(LOCAL_PATH)/NOTICE
+$(LOCAL_PATH)/NOTICE: $(LOCAL_PATH)/COPYING | $(ACP)
+	$(copy-file-to-target)
+
 include $(BUILD_STATIC_LIBRARY)
 
 
@@ -71,7 +90,7 @@ include $(BUILD_STATIC_LIBRARY)
 
 include $(CLEAR_VARS)
 include $(LOCAL_PATH)/src/Makefile.inc
-LOCAL_SRC_FILES := $(addprefix src/,$(CURL_SOURCES))
+LOCAL_SRC_FILES := $(addprefix src/,$(CURL_CFILES))
 
 LOCAL_MODULE := curl
 LOCAL_STATIC_LIBRARIES := libcurl
@@ -79,8 +98,8 @@ LOCAL_SYSTEM_SHARED_LIBRARIES := libc
 
 LOCAL_C_INCLUDES += $(LOCAL_PATH)/include $(LOCAL_PATH)/lib
 
-# This will also need to include $(CURLX_ONES) in order to correctly build
-# a dynamic library
+# This may also need to include $(CURLX_ONES) in order to correctly link
+# if libcurl is changed to be built as a dynamic library
 LOCAL_CFLAGS += $(common_CFLAGS)
 
 include $(BUILD_EXECUTABLE)

CMakeLists.txt

@@ -120,16 +120,11 @@ if(WIN32)
   if( NOT HAVE_WLDAP32)
     set(CURL_DISABLE_LDAP ON CACHE BOOL "" FORCE)
     message(STATUS "wldap32 not found CURL_DISABLE_LDAP set ON")
-    option(CURL_LDAP_WIN "Use W$ LDAP implementation" OFF)
+    option(CURL_LDAP_WIN "Use Windows LDAP implementation" OFF)
   else()
-    option(CURL_LDAP_WIN "Use W$ LDAP implementation" ON)
+    option(CURL_LDAP_WIN "Use Windows LDAP implementation" ON)
   endif()
   mark_as_advanced(CURL_LDAP_WIN)
-  set(CURL_LDAP_HYBRID OFF)
-else()
-  option(CURL_LDAP_HYBRID "W$ LDAP with non-W$ compiler" OFF)
-  mark_as_advanced(CURL_LDAP_HYBRID)
-  set(CURL_LDAP_WIN OFF)
 endif()
 
 if(HTTP_ONLY)

Makefile.dist

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -54,17 +54,23 @@ borland-clean:
 	cd ..\src
 	make -f Makefile.b32 clean
 
-watcom:
+watcom: .SYMBOLIC
 	cd lib
-	wmake -f Makefile.Watcom
+	wmake -u -f Makefile.Watcom
 	cd ..\src
-	wmake -f Makefile.Watcom
+	wmake -u -f Makefile.Watcom
 
-watcom-clean:
+watcom-clean: .SYMBOLIC
 	cd lib
-	wmake -f Makefile.Watcom clean
+	wmake -u -f Makefile.Watcom clean
 	cd ..\src
-	wmake -f Makefile.Watcom clean
+	wmake -u -f Makefile.Watcom clean
+
+watcom-vclean: .SYMBOLIC
+	cd lib
+	wmake -u -f Makefile.Watcom vclean
+	cd ..\src
+	wmake -u -f Makefile.Watcom vclean
 
 mingw32:
 	$(MAKE) -C lib -f Makefile.m32
@@ -266,22 +272,22 @@ vc8: lib/Makefile.vc8 src/Makefile.vc8
 
 lib/Makefile.vc8: lib/Makefile.vc6
 	@echo "generate $@"
-	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/wsock32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" lib/Makefile.vc6 > lib/Makefile.vc8
+	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" lib/Makefile.vc6 > lib/Makefile.vc8
 
 src/Makefile.vc8: src/Makefile.vc6
 	@echo "generate $@"
-	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/wsock32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" src/Makefile.vc6 > src/Makefile.vc8
+	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" src/Makefile.vc6 > src/Makefile.vc8
 
 # VC9 makefiles are for use with VS2008
 vc9: lib/Makefile.vc9 src/Makefile.vc9
 
 lib/Makefile.vc9: lib/Makefile.vc6
 	@echo "generate $@"
-	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" lib/Makefile.vc6 > lib/Makefile.vc9
+	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" lib/Makefile.vc6 > lib/Makefile.vc9
 
 src/Makefile.vc9: src/Makefile.vc6
 	@echo "generate $@"
-	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" src/Makefile.vc6 > src/Makefile.vc9
+	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" src/Makefile.vc6 > src/Makefile.vc9
 
 ca-bundle: lib/mk-ca-bundle.pl
 	@echo "generate a fresh ca-bundle.crt"

RELEASE-NOTES

@@ -1,51 +1,58 @@
-Curl and libcurl 7.20.1
+Curl and libcurl 7.21.1
 
- Public curl releases:         115
- Command line options:         136
- curl_easy_setopt() options:   174
+ Public curl releases:         117
+ Command line options:         138
+ curl_easy_setopt() options:   180
  Public functions in libcurl:  58
  Known libcurl bindings:       39
- Contributors:                 776
+ Contributors:                 808
 
 This release includes the following changes:
 
- o The 'ares' subtree has been removed from the source repository
- o smoother rate limiting
- o allow user+password in the URL for all protocols
- o POP3: Get message listing if no mailbox in URL
+ o maketgz: produce CHANGES automatically
+ o added support for NTLM authentication when compiled with NSS
+ o build: Enable configure --enable-werror
+ o curl-config: --built-shared returns shared info
 
 This release includes the following bugfixes:
 
- o VMS builder bad behavior when used in a batch job
- o multiple recepients with SMTP
- o fixed the CURL_FORMAT_* defines when building with cmake
- o missing quote in libcurl.m4
- o SMTP: now waits for 250 after the DATA transfer
- o SMTP: use angle brackets in RCPT TO
- o curl --trace-time not using local time
- o off-by-one in the chunked encoding trailer parser
- o superfluous blocking for OpenSSL-based SSL connects and multi interface
- o TFTP upload
- o FTP timeouts after file transferred completely
- o skip poll() on Interix
- o CURLOPT_CERTINFO memory leak
- o sub-second timeouts improvements
- o configure fixes for GSSAPI
- o threaded resolver double free when closing curl handle
- o configure fixes for building with the clang compiler
- o easy interix rate limiting logic
- o curl_multi_remove_handle() caused use after free
- o TFTP improved error codes
- o TFTP fixed TSIZE handling for uploads
- o SSL possible double free when reusing curl handle
- o alarm()-based DNS timeout bug
- o re-used FTP connection multi interface crash
- o chunked-encoding with Content-Length: header problem
- o multi interface HTTP POST over a proxy using PROXYTUNNEL
- o RTSP GET_PARAMETER
- o timeout after last data chunk was handled
- o SFTP download hang
- o FTP quote commands prefixed with '*' now can fail without aborting
+ o configure: spell --disable-threaded-resolver correctly
+ o multi: call the progress callback in all states
+ o multi: unmark handle as used when no longer head of pipeline
+ o sendrecv: treat all negative values from send/recv as errors
+ o ftp-wildcard: avoid tight loop when used without any pattern
+ o multi_socket: re-use of same socket without notifying app
+ o ftp wildcard: FTP LIST parser FIX
+ o urlglobbing backslash escaping bug
+ o build: add enable IPV6 option for the VC makefiles
+ o multi: CURLINFO_LASTSOCKET doesn't work after remove_handle
+ o --libcurl: use *_LARGE options with typecasted constants
+ o --libcurl: hide setopt() calls setting default options
+ o curl: avoid setting libcurl options to its default
+ o --libcurl: list the tricky options instead of using [REMARK]
+ o http: don't enable chunked during authentication negotiations
+ o upload: warn users trying to upload from stdin with anyauth
+ o configure: allow environments variable to override internals
+ o threaded resolver: fix timeout issue
+ o multi: fix condition that remove timers before trigger
+ o examples: add curl_multi_timeout
+ o --retry: access violation with URL part sets continued
+ o ssh: Fix compile error on 64-bit systems.
+ o remote-header-name: chop filename at next semicolon
+ o ftp: response timeout bug in "quote" sending
+ o CUSTOMREQUEST: shouldn't be disabled when HTTP is disabled
+ o Watcom makefiles overhaul.
+ o NTLM tests: boost coverage by forcing the hostname
+ o multi: fix FTPS connecting the data connection with OpenSSL
+ o retry: consider retrying even if -f is used
+ o fix SOCKS problem when using multi interface
+ o typecheck-gcc: add checks for recently added options
+ o SCP: send large files properly with new enough libssh2
+ o multi_socket: set timeout for 100-continue
+ o ";type=" URL suffix over HTTP proxy
+ o acknowledge progress callback error returns during connect
+ o Watcom makefile fixes
+ o runtests: clear old setenv remainders before test
 
 This release includes the following known bugs:
 
@@ -54,11 +61,11 @@ This release includes the following known bugs:
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Steven M. Schweda, Yang Tse, Jack Zhang, Tom Donovan, Martin Hager,
- Daniel Fandrich, Patrick Monnerat, Pat Ray, Wesley Miaw, Ben Greear,
- Ryan Chan, Markus Duft, Andrei Benea, Jacob Moshenko, Daniel Johnson,
- Constantine Sapuntzakis, Douglas Steinwand, Thomas Lopatic, Hauke Duden,
- Akos Pasztory, Kenny To, Christopher Conroy, Massimo Callegari,
- Bob Richmond, Matt Wixson
+ Dan Fandrich, Kamil Dudka, Krister Johansen, Pavel Raiskup, Jon Sargeant,
+ Pierre Joye, Tor Arntsen, Constantine Sapuntzakis, Sidney San Martin,
+ Jeff Pohlmeyer, Jan Van Boghout, Ben Greear, Guenter Knauf, Adam Light,
+ Georg Lippitsch, Mike Power, Robin Cornelius, Mikael Johansson,
+ Yang Tse, Ben Darnell
+
 
         Thanks! (and sorry if I forgot to mention someone)

TODO-RELEASE

@@ -1,4 +1,4 @@
-To be addressed in 7.20.1 (planned release: April 2010)
+To be addressed in 7.XX.X
 =========================
 
 261 - 

buildconf

@@ -6,7 +6,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -33,6 +33,17 @@ die(){
 findtool(){
   file="$1"
 
+  if { echo $file | grep "/" >/dev/null 2>&1; } then
+    # we only check for the explicit file name if the file is given
+    # including a slash. Use ./ for current dir. Previously this would
+    # otherwise always cause findtool to search the local dir first, which
+    # is wrong.
+    if test -f "$file"; then
+      echo "$file"
+      return
+    fi
+  fi
+
   old_IFS=$IFS; IFS=':'
   for path in $PATH
   do

configure.ac

@@ -40,6 +40,7 @@ AM_MAINTAINER_MODE
 CURL_CHECK_OPTION_DEBUG
 CURL_CHECK_OPTION_OPTIMIZE
 CURL_CHECK_OPTION_WARNINGS
+CURL_CHECK_OPTION_WERROR
 CURL_CHECK_OPTION_CURLDEBUG
 CURL_CHECK_OPTION_ARES
 
@@ -51,33 +52,48 @@ CURL_CHECK_PATH_SEPARATOR_REQUIRED
 CONFIGURE_OPTIONS="\"$ac_configure_args\""
 AC_SUBST(CONFIGURE_OPTIONS)
 
+CURL_CFLAG_EXTRAS=""
+if test X"$want_werror" == Xyes; then
+  CURL_CFLAG_EXTRAS="-Werror"
+fi
+AC_SUBST(CURL_CFLAG_EXTRAS)
+
 dnl SED is mandatory for configure process and libtool.
 dnl Set it now, allowing it to be changed later.
-AC_PATH_PROG([SED], [sed], [not_found],
-  [$PATH:/usr/bin:/usr/local/bin])
-if test -z "$SED" || test "$SED" = "not_found"; then
-  AC_MSG_ERROR([sed not found in PATH. Cannot continue without sed.])
+if test -z "$SED"; then
+  dnl allow it to be overridden
+  AC_PATH_PROG([SED], [sed], [not_found],
+    [$PATH:/usr/bin:/usr/local/bin])
+  if test -z "$SED" || test "$SED" = "not_found"; then
+    AC_MSG_ERROR([sed not found in PATH. Cannot continue without sed.])
+  fi
 fi
 AC_SUBST([SED])
 
 dnl GREP is mandatory for configure process and libtool.
 dnl Set it now, allowing it to be changed later.
-AC_PATH_PROG([GREP], [grep], [not_found],
-  [$PATH:/usr/bin:/usr/local/bin])
-if test -z "$GREP" || test "$GREP" = "not_found"; then
-  AC_MSG_ERROR([grep not found in PATH. Cannot continue without grep.])
+if test -z "$GREP"; then
+  dnl allow it to be overridden
+  AC_PATH_PROG([GREP], [grep], [not_found],
+    [$PATH:/usr/bin:/usr/local/bin])
+  if test -z "$GREP" || test "$GREP" = "not_found"; then
+    AC_MSG_ERROR([grep not found in PATH. Cannot continue without grep.])
+  fi
 fi
 AC_SUBST([GREP])
 
 dnl EGREP is mandatory for configure process and libtool.
 dnl Set it now, allowing it to be changed later.
-if echo a | ($GREP -E '(a|b)') >/dev/null 2>&1; then
-  AC_MSG_CHECKING([for egrep])
-  EGREP="$GREP -E"
-  AC_MSG_RESULT([$EGREP])
-else
-  AC_PATH_PROG([EGREP], [egrep], [not_found],
-    [$PATH:/usr/bin:/usr/local/bin])
+if test -z "$EGREP"; then
+  dnl allow it to be overridden
+  if echo a | ($GREP -E '(a|b)') >/dev/null 2>&1; then
+    AC_MSG_CHECKING([for egrep])
+    EGREP="$GREP -E"
+    AC_MSG_RESULT([$EGREP])
+  else
+    AC_PATH_PROG([EGREP], [egrep], [not_found],
+      [$PATH:/usr/bin:/usr/local/bin])
+  fi
 fi
 if test -z "$EGREP" || test "$EGREP" = "not_found"; then
   AC_MSG_ERROR([egrep not found in PATH. Cannot continue without egrep.])
@@ -86,10 +102,13 @@ AC_SUBST([EGREP])
 
 dnl AR is mandatory for configure process and libtool.
 dnl This is target dependent, so check it as a tool.
-AC_PATH_TOOL([AR], [ar], [not_found],
-  [$PATH:/usr/bin:/usr/local/bin])
-if test -z "$AR" || test "$AR" = "not_found"; then
-  AC_MSG_ERROR([ar not found in PATH. Cannot continue without ar.])
+if test -z "$AR"; then
+  dnl allow it to be overridden
+  AC_PATH_TOOL([AR], [ar], [not_found],
+    [$PATH:/usr/bin:/usr/local/bin])
+  if test -z "$AR" || test "$AR" = "not_found"; then
+    AC_MSG_ERROR([ar not found in PATH. Cannot continue without ar.])
+  fi
 fi
 AC_SUBST([AR])
 
@@ -121,13 +140,13 @@ AC_SUBST(PKGADD_VENDOR)
 
 dnl
 dnl initialize all the info variables
-    curl_ssl_msg="no      (--with-ssl / --with-gnutls / --with-nss)"
+    curl_ssl_msg="no      (--with-{ssl,gnutls,nss,polarssl} )"
     curl_ssh_msg="no      (--with-libssh2)"
    curl_zlib_msg="no      (--with-zlib)"
    curl_krb4_msg="no      (--with-krb4*)"
     curl_gss_msg="no      (--with-gssapi)"
  curl_spnego_msg="no      (--with-spnego)"
-   curl_ares_msg="no      (--enable-ares)"
+    curl_res_msg="default (--enable-ares / --enable-threaded-resolver)"
    curl_ipv6_msg="no      (--enable-ipv6)"
     curl_idn_msg="no      (--with-libidn)"
  curl_manual_msg="no      (--enable-manual)"
@@ -136,6 +155,7 @@ curl_verbose_msg="enabled (--disable-verbose)"
    curl_ldap_msg="no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)"
   curl_ldaps_msg="no      (--enable-ldaps)"
    curl_rtsp_msg="no      (--enable-rtsp)"
+   curl_rtmp_msg="no      (--with-librtmp)"
 
 dnl
 dnl Save anything in $LIBS for later
@@ -208,6 +228,9 @@ case $host in
 esac
 AC_MSG_RESULT($mimpure)
 AM_CONDITIONAL(MIMPURE, test x$mimpure = xyes)
+
+dnl 'STATICLIB' is, in spite of its name, not generic but only for static-only
+dnl builds on Windows
 AM_CONDITIONAL(STATICLIB, false)
 
 AC_MSG_CHECKING([if we need BUILDING_LIBCURL])
@@ -370,28 +393,10 @@ AC_HELP_STRING([--disable-ldap],[Disable LDAP support]),
        AC_SUBST(CURL_DISABLE_LDAP, [1])
        ;;
   *)
-       case $host in
-         *-*-cygwin*)
-           # Force no ldap. config/build process is broken for cygwin
-           AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
-           AC_SUBST(CURL_DISABLE_LDAP, [1])
-           AC_MSG_RESULT(no)
-           ;;
-         *)
-           AC_MSG_RESULT(yes)
-       esac
+       AC_MSG_RESULT(yes)
        ;;
   esac ],[
-       case $host in
-         *-*-cygwin*)
-           # Force no ldap. config/build process is broken for cygwin
-           AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
-           AC_SUBST(CURL_DISABLE_LDAP, [1])
-           AC_MSG_RESULT(no)
-           ;;
-         *)
-           AC_MSG_RESULT(yes)
-       esac ]
+       AC_MSG_RESULT(yes) ]
 )
 AC_MSG_CHECKING([whether to support ldaps])
 AC_ARG_ENABLE(ldaps,
@@ -403,20 +408,28 @@ AC_HELP_STRING([--disable-ldaps],[Disable LDAPS support]),
        AC_DEFINE(CURL_DISABLE_LDAPS, 1, [to disable LDAPS])
        AC_SUBST(CURL_DISABLE_LDAPS, [1])
        ;;
-  *)   if test x$CURL_DISABLE_LDAP = x1 ; then
-               AC_MSG_RESULT(LDAP support needs to be enabled in order to enable LDAPS support!)
-               AC_DEFINE(CURL_DISABLE_LDAPS, 1, [to disable LDAPS])
-               AC_SUBST(CURL_DISABLE_LDAPS, [1])
+  *)   if test "x$CURL_DISABLE_LDAP" = "x1" ; then
+         AC_MSG_RESULT(LDAP needs to be enabled to support LDAPS)
+         AC_DEFINE(CURL_DISABLE_LDAPS, 1, [to disable LDAPS])
+         AC_SUBST(CURL_DISABLE_LDAPS, [1])
        else
-               AC_MSG_RESULT(yes)
-               AC_DEFINE(HAVE_LDAP_SSL, 1, [Use LDAPS implementation])
-               curl_ldaps_msg="enabled"
+         AC_MSG_RESULT(yes)
+         AC_DEFINE(HAVE_LDAP_SSL, 1, [Use LDAPS implementation])
+         AC_SUBST(HAVE_LDAP_SSL, [1])
+         curl_ldaps_msg="enabled"
        fi
        ;;
-  esac ],
-       AC_MSG_RESULT(no)
-       AC_DEFINE(CURL_DISABLE_LDAPS, 1, [to disable LDAPS])
-       AC_SUBST(CURL_DISABLE_LDAPS, [1])
+  esac ],[
+       if test "x$CURL_DISABLE_LDAP" = "x1" ; then
+         AC_MSG_RESULT(no)
+         AC_DEFINE(CURL_DISABLE_LDAPS, 1, [to disable LDAPS])
+         AC_SUBST(CURL_DISABLE_LDAPS, [1])
+       else
+         AC_MSG_RESULT(yes)
+         AC_DEFINE(HAVE_LDAP_SSL, 1, [Use LDAPS implementation])
+         AC_SUBST(HAVE_LDAP_SSL, [1])
+         curl_ldaps_msg="enabled"
+       fi ]
 )
 
 AC_MSG_CHECKING([whether to support rtsp])
@@ -751,6 +764,8 @@ ac_cv_func_strcasecmp="no"
 
 CURL_CHECK_LIBS_CONNECT
 
+CURL_NETWORK_LIBS=$LIBS
+
 dnl **********************************************************************
 dnl In case that function clock_gettime with monotonic timer is available,
 dnl check for additional required libraries.
@@ -801,13 +816,11 @@ if test x$CURL_DISABLE_LDAP != x1 ; then
   CURL_CHECK_HEADER_LDAP_SSL
 
   if test -z "$LDAPLIBNAME" ; then
-    case $host in
-      *-*-cygwin* | *-*-mingw* | *-*-pw32*)
-        dnl Windows uses a single and unique OpenLDAP DLL name
-        LDAPLIBNAME="wldap32"
-        LBERLIBNAME="no"
-        ;;
-    esac
+    if test "$ac_cv_native_windows" = "yes"; then
+      dnl Windows uses a single and unique LDAP library name
+      LDAPLIBNAME="wldap32"
+      LBERLIBNAME="no"
+    fi
   fi
 
   if test "$LDAPLIBNAME" ; then
@@ -849,18 +862,17 @@ if test x$CURL_DISABLE_LDAP != x1 ; then
 fi
 
 if test x$CURL_DISABLE_LDAP != x1 ; then
-  AC_CHECK_FUNCS([ldap_url_parse])
+  AC_CHECK_FUNCS([ldap_url_parse ldap_init_fd])
 
   if test "$LDAPLIBNAME" = "wldap32"; then
     curl_ldap_msg="enabled (winldap)"
-    AC_DEFINE(CURL_LDAP_WIN, 1, [Use W$ LDAP implementation])
-    case $host in
-      *-*-cygwin* | *-*-pw32*)
-        AC_DEFINE(CURL_LDAP_HYBRID, 1, [W$ LDAP with non-W$ compiler])
-        ;;
-    esac
+    AC_DEFINE(CURL_LDAP_WIN, 1, [Use Windows LDAP implementation])
   else
     curl_ldap_msg="enabled (OpenLDAP)"
+    if test "x$ac_cv_func_ldap_init_fd" = "xyes"; then
+      AC_DEFINE(USE_OPENLDAP, 1, [Use OpenLDAP-specific code])
+      AC_SUBST(USE_OPENLDAP, [1])
+    fi
   fi
 fi
 
@@ -1137,10 +1149,17 @@ if test x"$want_gss" = xyes; then
     ],
     [
       dnl not found, check Heimdal or MIT
+      AC_CHECK_HEADERS([gssapi/gssapi.h], [], [not_mit=1])
       AC_CHECK_HEADERS(
-        [gssapi/gssapi.h gssapi/gssapi_generic.h gssapi/gssapi_krb5.h],
+        [gssapi/gssapi_generic.h gssapi/gssapi_krb5.h],
         [],
-        [not_mit=1])
+        [not_mit=1],
+        [
+AC_INCLUDES_DEFAULT
+#ifdef HAVE_GSSAPI_GSSAPI_H
+#include <gssapi/gssapi.h>
+#endif
+        ])
       if test "x$not_mit" = "x1"; then
         dnl MIT not found, check for Heimdal
         AC_CHECK_HEADER(gssapi.h,
@@ -1699,6 +1718,90 @@ if test "$OPENSSL_ENABLED" != "1"; then
 
 fi dnl OPENSSL != 1
 
+dnl ----------------------------------------------------
+dnl check for PolarSSL
+dnl ----------------------------------------------------
+
+dnl Default to compiler & linker defaults for PolarSSL files & libraries.
+OPT_POLARSSL=no
+
+_cppflags=$CPPFLAGS
+_ldflags=$LDFLAGS
+AC_ARG_WITH(polarssl,dnl
+AC_HELP_STRING([--with-polarssl=PATH],[where to look for PolarSSL, PATH points to the installation root (default: /usr/local/)])
+AC_HELP_STRING([--without-polarssl], [disable PolarSSL detection]),
+  OPT_POLARSSL=$withval)
+
+if test "$OPENSSL_ENABLED" != "1"; then
+
+  if test X"$OPT_POLARSSL" != Xno; then
+
+    if test "$OPT_POLARSSL" = "yes"; then
+      OPT_POLARSSL=""
+    fi
+
+    if test -z "$OPT_POLARSSL" ; then
+      dnl check for lib first without setting any new path
+
+      AC_CHECK_LIB(polarssl, havege_init,
+      dnl libpolarssl found, set the variable
+       [
+         AC_DEFINE(USE_POLARSSL, 1, [if PolarSSL is enabled])
+         AC_SUBST(USE_POLARSSL, [1])
+         POLARSSL_ENABLED=1
+         USE_POLARSSL="yes"
+         curl_ssl_msg="enabled (PolarSSL)"
+        ])
+    fi
+
+    if test "x$USE_POLARSSL" != "xyes"; then
+      dnl add the path and test again
+      addld=-L$OPT_POLARSSL/lib$libsuff
+      addcflags=-I$OPT_POLARSSL/include
+      polarssllib=$OPT_POLARSSL/lib$libsuff
+
+      LDFLAGS="$LDFLAGS $addld"
+      if test "$addcflags" != "-I/usr/include"; then
+         CPPFLAGS="$CPPFLAGS $addcflags"
+      fi
+
+      AC_CHECK_LIB(polarssl, ssl_init,
+       [
+       AC_DEFINE(USE_POLARSSL, 1, [if PolarSSL is enabled])
+       AC_SUBST(USE_POLARSSL, [1])
+       POLARSSL_ENABLED=1
+       USE_POLARSSL="yes"
+       curl_ssl_msg="enabled (PolarSSL)"
+       ],
+       [
+         CPPFLAGS=$_cppflags
+         LDFLAGS=$_ldflags
+       ])
+    fi
+
+    if test "x$USE_POLARSSL" = "xyes"; then
+      AC_MSG_NOTICE([detected PolarSSL])
+
+      CURL_LIBS="$CURL_LIBS -lpolarssl"
+      LIBS="$LIBS -lpolarssl"
+
+      if test -n "$polarssllib"; then
+        dnl when shared libs were found in a path that the run-time
+        dnl linker doesn't search through, we need to add it to
+        dnl LD_LIBRARY_PATH to prevent further configure tests to fail
+        dnl due to this
+
+        LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$polarssllib"
+        export LD_LIBRARY_PATH
+        AC_MSG_NOTICE([Added $polarssllib to LD_LIBRARY_PATH])
+      fi
+
+    fi
+
+  fi dnl PolarSSL not disabled
+
+fi dnl OPENSSL != 1
+
 dnl ----------------------------------------------------
 dnl NSS. Only check if GnuTLS and OpenSSL are not enabled
 dnl ----------------------------------------------------
@@ -1795,9 +1898,9 @@ if test "$OPENSSL_ENABLED" != "1" -a "$GNUTLS_ENABLED" != "1"; then
 
 fi dnl OPENSSL != 1 -a GNUTLS_ENABLED != 1
 
-if test "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED" = "x"; then
+if test "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED$POLARSSL_ENABLED" = "x"; then
   AC_MSG_WARN([SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more.])
-  AC_MSG_WARN([Use --with-ssl, --with-gnutls or --with-nss to address this.])
+  AC_MSG_WARN([Use --with-ssl, --with-gnutls, --with-polarssl or --with-nss to address this.])
 else
   # SSL is enabled, genericly
   AC_SUBST(SSL_ENABLED)
@@ -1882,7 +1985,10 @@ if test X"$OPT_LIBSSH2" != Xno; then
        dnl to prevent further configure tests to fail due to this
 
        dnl libssh2_version is a post 1.0 addition
-       AC_CHECK_FUNCS( libssh2_version )
+       dnl libssh2_init and libssh2_exit were added in 1.2.5
+       dnl libssh2_scp_send64 was added in 1.2.6
+       AC_CHECK_FUNCS( libssh2_version libssh2_init libssh2_exit \
+                       libssh2_scp_send64 )
 
        LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$DIR_SSH2"
        export LD_LIBRARY_PATH
@@ -1896,6 +2002,79 @@ if test X"$OPT_LIBSSH2" != Xno; then
   fi
 fi
 
+dnl **********************************************************************
+dnl Check for the presence of LIBRTMP libraries and headers
+dnl **********************************************************************
+
+dnl Default to compiler & linker defaults for LIBRTMP files & libraries.
+OPT_LIBRTMP=off
+AC_ARG_WITH(librtmp,dnl
+AC_HELP_STRING([--with-librtmp=PATH],[Where to look for librtmp, PATH points to the LIBRTMP installation (default: /usr/local/lib); when possible, set the PKG_CONFIG_PATH environment variable instead of using this option])
+AC_HELP_STRING([--without-librtmp], [disable LIBRTMP]),
+  OPT_LIBRTMP=$withval)
+
+if test X"$OPT_LIBRTMP" != Xno; then
+  dnl backup the pre-librtmp variables
+  CLEANLDFLAGS="$LDFLAGS"
+  CLEANCPPFLAGS="$CPPFLAGS"
+  CLEANLIBS="$LIBS"
+
+  case "$OPT_LIBRTMP" in
+  yes)
+    dnl --with-librtmp (without path) used
+    CURL_CHECK_PKGCONFIG(librtmp)
+
+    if test "$PKGCONFIG" != "no" ; then
+      LIB_RTMP=`$PKGCONFIG --libs-only-l librtmp`
+      LD_RTMP=`$PKGCONFIG --libs-only-L librtmp`
+      CPP_RTMP=`$PKGCONFIG --cflags-only-I librtmp`
+      version=`$PKGCONFIG --modversion librtmp`
+      DIR_RTMP=`echo $LD_RTMP | $SED -e 's/-L//'`
+    fi
+
+    ;;
+  off)
+    dnl no --with-librtmp option given, just check default places
+    ;;
+  *)
+    dnl use the given --with-librtmp spot
+    PREFIX_RTMP=$OPT_LIBRTMP
+    ;;
+  esac
+
+  dnl if given with a prefix, we set -L and -I based on that
+  if test -n "$PREFIX_RTMP"; then
+    LD_RTMP=-L${PREFIX_RTMP}/lib$libsuff
+    CPP_RTMP=-I${PREFIX_RTMP}/include
+    DIR_RTMP=${PREFIX_RTMP}/lib$libsuff
+  fi
+
+  LDFLAGS="$LDFLAGS $LD_RTMP"
+  CPPFLAGS="$CPPFLAGS $CPP_RTMP"
+  LIBS="$LIBS $LIB_RTMP"
+
+  AC_CHECK_LIB(rtmp, RTMP_Init)
+
+  AC_CHECK_HEADERS(librtmp/rtmp.h,
+    curl_rtmp_msg="enabled (librtmp)"
+    LIBRTMP_ENABLED=1
+    AC_DEFINE(USE_LIBRTMP, 1, [if librtmp is in use])
+    AC_SUBST(USE_LIBRTMP, [1])
+  )
+
+  if test X"$OPT_LIBRTMP" != Xoff &&
+     test "$LIBRTMP_ENABLED" != "1"; then
+    AC_MSG_ERROR([librtmp libs and/or directories were not found where specified!])
+  fi
+
+  if test "$LIBRTMP_ENABLED" != "1"; then
+    dnl no librtmp, revert back to clean variables
+    LDFLAGS=$CLEANLDFLAGS
+    CPPFLAGS=$CLEANCPPFLAGS
+    LIBS=$CLEANLIBS
+  fi
+fi
+
 dnl **********************************************************************
 dnl Check for the presence of IDN libraries and headers
 dnl **********************************************************************
@@ -2282,6 +2461,35 @@ AM_CONDITIONAL(USE_MANUAL, test x"$USE_MANUAL" = x1)
 CURL_CHECK_LIB_ARES
 AM_CONDITIONAL(USE_EMBEDDED_ARES, test x$embedded_ares = xyes)
 
+if test "x$enable_shared" = "xyes"; then
+  build_libhostname=yes
+else
+  build_libhostname=no
+fi
+AM_CONDITIONAL(BUILD_LIBHOSTNAME, test x$build_libhostname = xyes)
+
+CURL_CHECK_OPTION_THREADED_RESOLVER
+
+if test "x$want_thres" = xyes && test "x$want_ares" = xyes; then
+  AC_MSG_ERROR(
+[Options --enable-threaded-resolver and --enable-ares are mutually exclusive])
+fi
+
+if test "$want_thres" = "yes"; then
+  AC_CHECK_HEADER(pthread.h,
+    [ AC_DEFINE(HAVE_PTHREAD_H, 1, [if you have <pthread.h>])
+      save_CFLAGS="$CFLAGS"
+      CFLAGS="$CFLAGS -pthread"
+      AC_CHECK_LIB(pthread, pthread_create,
+        [ AC_MSG_NOTICE([using POSIX threaded DNS lookup])
+          AC_DEFINE(USE_THREADS_POSIX, 1, [if you want POSIX threaded DNS lookup])
+          USE_THREADS_POSIX=1
+          curl_res_msg="threaded"
+        ],
+        [ CFLAGS="$save_CFLAGS"])
+  ])
+fi
+
 dnl ************************************************************
 dnl disable verbose text strings
 dnl
@@ -2452,10 +2660,15 @@ LIBCURL_LIBS=$LIBS
 AC_SUBST(LIBCURL_LIBS)
 AC_SUBST(CURL_LIBS)
 AC_SUBST(TEST_SERVER_LIBS)
+AC_SUBST(CURL_NETWORK_LIBS)
 LIBS=$ALL_LIBS  dnl LIBS is a magic variable that's used for every link
 
 AM_CONDITIONAL(CROSSCOMPILING, test x$cross_compiling = xyes)
 
+dnl yes or no
+ENABLE_SHARED="$enable_shared"
+AC_SUBST(ENABLE_SHARED)
+
 dnl
 dnl For keeping supported features and protocols also in pkg-config file
 dnl since it is more cross-compile frient than curl-config
@@ -2475,7 +2688,7 @@ fi
 if test "x$HAVE_LIBZ" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES libz"
 fi
-if test "x$USE_ARES" = "x1"; then
+if test "x$USE_ARES" = "x1" -o "x$USE_THREADS_POSIX" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES AsynchDNS"
 fi
 if test "x$IDN_ENABLED" = "x1"; then
@@ -2484,7 +2697,8 @@ fi
 if test "x$USE_WINDOWS_SSPI" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES SSPI"
 fi
-if test "x$USE_SSLEAY" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" -o "x$GNUTLS_ENABLED" = "x1"; then
+if test "x$USE_SSLEAY" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" \
+    -o "x$GNUTLS_ENABLED" = "x1" -o "x$NSS_ENABLED" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES NTLM"
 fi
 
@@ -2511,9 +2725,12 @@ if test "x$CURL_DISABLE_TELNET" != "x1"; then
 fi
 if test "x$CURL_DISABLE_LDAP" != "x1"; then
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS LDAP"
-fi
-if test "x$CURL_DISABLE_LDAPS" != "x1"; then
-  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS LDAPS"
+  if test "x$CURL_DISABLE_LDAPS" != "x1"; then
+    if (test "x$USE_OPENLDAP" = "x1" && test "x$SSL_ENABLED" = "x1") ||
+      (test "x$USE_OPENLDAP" != "x1"  && test "x$HAVE_LDAP_SSL" = "x1"); then
+      SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS LDAPS"
+    fi
+  fi
 fi
 if test "x$CURL_DISABLE_DICT" != "x1"; then
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS DICT"
@@ -2546,6 +2763,9 @@ fi
 if test "x$CURL_DISABLE_RTSP" != "x1"; then
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS RTSP"
 fi
+if test "x$USE_LIBRTMP" = "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS RTMP"
+fi
 
 dnl replace spaces with newlines
 dnl sort the lines
@@ -2565,6 +2785,7 @@ squeeze LIBS
 squeeze CURL_LIBS
 squeeze LIBCURL_LIBS
 squeeze TEST_SERVER_LIBS
+squeeze CURL_NETWORK_LIBS
 
 squeeze SUPPORT_FEATURES
 squeeze SUPPORT_PROTOCOLS
@@ -2617,7 +2838,7 @@ AC_MSG_NOTICE([Configured to build curl/libcurl:
   krb4 support:    ${curl_krb4_msg}
   GSSAPI support:  ${curl_gss_msg}
   SPNEGO support:  ${curl_spnego_msg}
-  c-ares support:  ${curl_ares_msg}
+  resolver:        ${curl_res_msg}
   ipv6 support:    ${curl_ipv6_msg}
   IDN support:     ${curl_idn_msg}
   Build libcurl:   Shared=${enable_shared}, Static=${enable_static}
@@ -2629,6 +2850,7 @@ AC_MSG_NOTICE([Configured to build curl/libcurl:
   LDAP support:    ${curl_ldap_msg}
   LDAPS support:   ${curl_ldaps_msg}
   RTSP support:    ${curl_rtsp_msg}
+  RTMP support:    ${curl_rtmp_msg}
   Protocols:       ${SUPPORT_PROTOCOLS}
 ])
 

curl-config.in

@@ -6,7 +6,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 2001 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 2001 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -32,6 +32,7 @@ Usage: curl-config [OPTION]
 
 Available values for OPTION include:
 
+  --built-shared says 'yes' if libcurl was built shared
   --ca        ca bundle install path
   --cc        compiler
   --cflags    pre-processor and compiler flags
@@ -64,6 +65,10 @@ while test $# -gt 0; do
     esac
 
     case "$1" in
+    --built-shared)
+        echo @ENABLE_SHARED@
+        ;;
+
     --ca)
 	echo "@CURL_CA_BUNDLE@"
 	;;
@@ -87,6 +92,7 @@ while test $# -gt 0; do
             echo "$protocol"
         done
 	;;
+
     --version)
 	echo libcurl @VERSION@
 	exit 0

docs/.gitignore

@@ -0,0 +1,2 @@
+*.html
+*.pdf

docs/CONTRIBUTE

@@ -29,9 +29,11 @@
  2.11 Test Cases
 
  3. Pushing Out Your Changes
+ 3.1 Write Access to git Repository
  3.2 How To Make a Patch with git
  3.3 How To Make a Patch without git
  3.4 How to get your changes into the main sources
+ 3.5 Write good commit messages
 
 ==============================================================================
 
@@ -114,7 +116,7 @@
 
 2.4 Line Lengths
 
- We try to keep source lines shorter than 80 columns.
+ We write source lines shorter than 80 columns.
 
 2.5 General Style
 
@@ -197,7 +199,8 @@
      git commit [file]
 
  As usual, group your commits so that you commit all changes that at once that
- constitutes a logical change.
+ constitutes a logical change. See also section "3.5 Write good commit
+ messages".
 
  Once you have done all your commits and you're happy with what you see, you
  can make patches out of your changes that are suitable for mailing:
@@ -255,3 +258,22 @@
  5. If you've followed the above mentioned paragraphs and your patch still
     hasn't been incorporated after some weeks, consider resubmitting it to the
     list.
+
+3.5 Write good commit messages
+
+  A short guide to how to do fine commit messages in the curl project.
+
+  ---- start ----
+  [area]: [short line describing the main effect]
+
+  [separate the above single line from the rest with an empty line]
+
+  [full description, no wider than 72 columns that describe as much as
+  possible as to why this change is made, and possibly what things
+  it fixes and everything else that is related]
+   ---- stop ----
+
+  Don't forget to use commit --author="" if you commit someone else's work,
+  and make sure that you have your own user and email setup correctly in git
+  before you commit
+

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: Nov 7, 2009 (http://curl.haxx.se/docs/faq.html)
+Updated: June 30, 2010 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _
                               ___| | | |  _ \| |
                              / __| | | | |_) | |
@@ -74,6 +74,7 @@ FAQ
   4.16 My HTTP POST or PUT requests are slow!
   4.17 Non-functional connect timeouts on Windows
   4.18 file:// URLs containing drive letters (Windows, NetWare)
+  4.19 Why doesn't cURL return an error when the network cable is unplugged?
 
  5. libcurl Issues
   5.1 Is libcurl thread-safe?
@@ -83,7 +84,7 @@ FAQ
   5.5 Does CURLOPT_WRITEDATA and CURLOPT_READDATA work on win32 ?
   5.6 What about Keep-Alive or persistent connections?
   5.7 Link errors when building libcurl on Windows!
-  5.8 libcurl.so.3: open failed: No such file or directory
+  5.8 libcurl.so.X: open failed: No such file or directory
   5.9 How does libcurl resolve host names?
   5.10 How do I prevent libcurl from writing the response to stdout?
   5.11 How do I make libcurl not receive the whole HTTP response?
@@ -399,10 +400,10 @@ FAQ
 
   2.2 Does curl work/build with other SSL libraries?
 
-  Curl has been written to use OpenSSL, GnuTLS, yassl or NSS, although there
-  should not be many problems using a different library. If anyone does "port"
-  curl to use a different SSL library, we are of course very interested in
-  getting the patch!
+  Curl has been written to use OpenSSL, GnuTLS, yassl, NSS or PolarSSL,
+  although there should not be many problems using a different library. If
+  anyone does "port" curl to use a different SSL library, we are of course
+  very interested in getting the patch!
 
   2.3 Where can I find a copy of LIBEAY32.DLL?
 
@@ -944,6 +945,31 @@ FAQ
 
   In either case, cURL should now be looking for the correct file.
 
+  4.19 Why doesn't cURL return an error when the network cable is unplugged?
+
+  Unplugging the cable is not an error situation. The TCP/IP protocol stack
+  was designed to be fault tolerant, so even though there may be a physical
+  break somewhere the connection shouldn't be affected, just possibly
+  delayed.  Eventually, the physical break will be fixed or the data will be
+  re-routed around the physical problem.
+
+  In such cases, the TCP/IP stack is responsible for detecting when the
+  network connection is irrevocably lost. Since with some protocols it is
+  perfectly legal for the client wait indefinitely for data, the stack may
+  never report a problem, and even when it does, it can take up to 20 minutes
+  for it to detect an issue.  The curl option --keepalive-time enables
+  keep-alive support in the TCP/IP stack which makes it periodically probe the
+  connection to make sure it is still available to send data. That should
+  reliably detect any TCP/IP network failure.
+
+  But even that won't detect the network going down before the TCP/IP
+  connection is established (e.g. during a DNS lookup) or using protocols that
+  don't use TCP.  To handle those situations, curl offers a number of timeouts
+  on its own. --speed-limit/--speed-time will abort if the data transfer rate
+  falls too low, and --connect-timeout and --max-time can be used to put an
+  overall timeout on the connection phase or the entire transfer.
+
+
 5. libcurl Issues
 
   5.1 Is libcurl thread-safe?
@@ -1058,13 +1084,14 @@ FAQ
   Borland:         libcurl.lib   libcurl_imp.lib
 
 
-  5.8 libcurl.so.3: open failed: No such file or directory
+  5.8 libcurl.so.X: open failed: No such file or directory
 
   This is an error message you might get when you try to run a program linked
   with a shared version of libcurl and your run-time linker (ld.so) couldn't
-  find the shared library named libcurl.so.3.
+  find the shared library named libcurl.so.X. (Where X is the number of the
+  current libcurl ABI, typically 3 or 4).
 
-  You need to make sure that ld.so finds libcurl.so.3. You can do that
+  You need to make sure that ld.so finds libcurl.so.X. You can do that
   multiple ways, and it differs somewhat between different operating systems,
   but they are usually:
 
@@ -1100,10 +1127,10 @@ FAQ
     Using this offers asynchronous name resolves but it currently has no IPv6
     support.
 
-  - The Windows threaded resolver. It use:
+  - The threaded resolver (default option on Windows). It uses:
 
-    A - gethostbyname() on plain ipv4 windows hosts
-    B - getaddrinfo() on ipv6-enabled windows hosts
+    A - gethostbyname() on plain ipv4 hosts
+    B - getaddrinfo() on ipv6-enabled hosts
 
   Also note that libcurl never resolves or reverse-lookups addresses given as
   pure numbers, such as 127.0.0.1 or ::1.
@@ -1182,7 +1209,9 @@ FAQ
   to do "LIST -a" or similar to see them.
 
   The application thus needs to parse the LIST output. One such existing
-  list parser is available at http://cr.yp.to/ftpparse.html
+  list parser is available at http://cr.yp.to/ftpparse.html  Versions of
+  libcurl since 7.21.0 also provide the ability to specify a wildcard to
+  download multiple files from one FTP directory.
 
 
 6. License Issues

docs/FEATURES

@@ -43,7 +43,7 @@ HTTP
  - POST
  - Pipelining
  - multipart formpost (RFC1867-style)
- - authentication: Basic, Digest, NTLM(*1), GSS-Negotiate/Negotiate(*3) and
+ - authentication: Basic, Digest, NTLM(*9), GSS-Negotiate/Negotiate(*3) and
    SPNEGO (*4) to server and proxy
  - resume (both GET and PUT)
  - follow redirects
@@ -125,7 +125,7 @@ FILE
 FOOTNOTES
 =========
 
-  *1 = requires OpenSSL, GnuTLS, NSS or yassl
+  *1 = requires OpenSSL, GnuTLS, NSS, yassl or PolarSSL
   *2 = requires OpenLDAP
   *3 = requires a GSSAPI-compliant library, such as Heimdal or similar.
   *4 = requires FBopenssl
@@ -133,3 +133,4 @@ FOOTNOTES
   *6 = requires c-ares
   *7 = requires OpenSSL or NSS, as GnuTLS only supports SSLv3 and TLSv1
   *8 = requires libssh2
+  *9 = requires OpenSSL, GnuTLS, NSS or yassl

docs/HISTORY

@@ -157,6 +157,14 @@ September 2005:
 
  More than 100,000 unique visitors of the curl web site. 25 mirrors.
 
+December 2005:
+
+ security vulnerability: libcurl URL Buffer Overflow
+
+March 2006:
+
+ security vulnerability: libcurl TFTP Packet Buffer Overflow
+
 April 2006:
 
  Added the multi_socket() API
@@ -174,6 +182,10 @@ February 2007:
 
  Added support for the Mozilla NSS library to do the SSL/TLS stuff
 
+July 2007:
+
+ security vulnerability: libcurl GnuTLS insufficient cert verification
+
 November 2008:
 
  Command line options:         128
@@ -184,3 +196,42 @@ November 2008:
 
  145,000 unique visitors. >100 GB downloaded.
 
+March 2009:
+
+ security vulnerability: libcurl Arbitrary File Access
+
+August 2009:
+
+ security vulnerability: libcurl embedded zero in cert name
+
+December 2009:
+
+ Added support for IMAP, POP3 and SMTP
+
+January 2010:
+
+ Added support for RTSP
+
+February 2010:
+
+ security vulnerability: libcurl data callback excessive length
+
+March 2010:
+
+ The project switched over to use git instead of CVS for source code control
+
+May 2010:
+
+ Added support for RTMP
+
+ Added support for PolarSSL to do the SSL/TLS stuff
+
+August 2010:
+
+ Public curl releases:         117
+ Command line options:         138
+ curl_easy_setopt() options:   180
+ Public functions in libcurl:  58
+ Known libcurl bindings:       39
+ Contributors:                 808
+

docs/INSTALL

@@ -139,6 +139,9 @@ UNIX
      To build with NSS support instead of OpenSSL for SSL/TLS, note that
      you need to use both --without-ssl and --with-nss.
 
+     To build with PolarSSL support instead of OpenSSL for SSL/TLS, note that
+     you need to use both --without-ssl and --with-polarssl.
+
      To get GSSAPI support, build with --with-gssapi and have the MIT or
      Heimdal Kerberos 5 packages installed.
 
@@ -779,6 +782,11 @@ VxWorks
    To clean the build results type 'make -f ./Makefile.vxworks clean'.
 
 
+Android
+=======
+   See the build notes in the Android.mk file.
+
+
 CROSS COMPILE
 =============
    (This section was graciously brought to us by Jim Duey, with additions by
@@ -908,7 +916,7 @@ PORTS
         - Alpha OpenVMS V7.1-1H2
         - Alpha Tru64 v5.0 5.1
         - AVR32 Linux
-        - ARM Android 1.5
+        - ARM Android 1.5, 2.1
         - ARM INTEGRITY
         - ARM iPhone OS
         - Cell Linux

docs/INTERNALS

@@ -356,7 +356,7 @@ multi interface/non-blocking
 
  The FTP and the SFTP/SCP protocols are thus perfect examples of how we adapt
  and adjust the code to allow non-blocking operations even on multi-stage
- protocols. The DICT, TELNET and TFTP are crappy examples and they are subject
+ protocols. The DICT, LDAP and TELNET are crappy examples and they are subject
  for rewrite in the future to better fit the libcurl protocol family.
 
 SSL libraries

docs/KNOWN_BUGS

@@ -3,6 +3,11 @@ join in and help us correct one or more of these! Also be sure to check the
 changelog of the current development status, as one or more of these problems
 may have been fixed since this was written!
 
+76. The SOCKET type in Win64 is 64 bits large (and thus so is curl_socket_t on
+  that platform), and long is only 32 bits. It makes it impossible for
+  curl_easy_getinfo() to return a socket properly with the CURLINFO_LASTSOCKET
+  option as for all other operating systems.
+
 75. NTLM authentication involving unicode user name or password.
   http://curl.haxx.se/mail/lib-2009-10/0024.html
   http://curl.haxx.se/bug/view.cgi?id=2944325
@@ -63,10 +68,6 @@ may have been fixed since this was written!
   is waiting for the the 100-continue response.
   http://curl.haxx.se/mail/lib-2008-08/0462.html
 
-59. If the CURLOPT_PORT option is used on an FTP URL like
-  "ftp://example.com/file;type=A" using a proxy, the ";type=A" is stripped off.
-  See the comment in parse_remote_port()
-
 58. It seems sensible to be able to use CURLOPT_NOBODY and
   CURLOPT_FAILONERROR with FTP to detect if a file exists or not, but it is
   not working: http://curl.haxx.se/mail/lib-2008-07/0295.html
@@ -91,7 +92,7 @@ may have been fixed since this was written!
 
 52. Gautam Kachroo's issue that identifies a problem with the multi interface
   where a connection can be re-used without actually being properly
-  SSL-negoatiated:
+  SSL-negotiated:
   http://curl.haxx.se/mail/lib-2008-01/0277.html
 
 49. If using --retry and the transfer timeouts (possibly due to using -m or
@@ -141,12 +142,13 @@ may have been fixed since this was written!
 30. You need to use -g to the command line tool in order to use RFC2732-style
   IPv6 numerical addresses in URLs.
 
-29. IPv6 URLs with zone ID is not supported.
+29. IPv6 URLs with zone ID is not nicely supported.
   http://www.ietf.org/internet-drafts/draft-fenner-literal-zone-02.txt (expired)
   specifies the use of a plus sign instead of a percent when specifying zone
   IDs in URLs to get around the problem of percent signs being
   special. According to the reporter, Firefox deals with the URL _with_ a
   percent letter (which seems like a blatant URL spec violation).
+  libcurl supports zone IDs where the percent sign is URL-escaped (i.e. %25).
 
    See http://curl.haxx.se/bug/view.cgi?id=1371118
 
@@ -189,7 +191,7 @@ may have been fixed since this was written!
   would not meaningfully support NUL characters within RFC 959 <string>,
   anyway (e.g., UNIX pathnames may not contain NUL).
 
-14. Test case 165 might fail on system which has libidn present, but with an
+14. Test case 165 might fail on a system which has libidn present, but with an
   old iconv version (2.1.3 is a known bad version), since it doesn't recognize
   the charset when named ISO8859-1. Changing the name to ISO-8859-1 makes the
   test pass, but instead makes it fail on Solaris hosts that use its native

docs/RESOURCES

@@ -32,12 +32,16 @@ This document lists documents and standards used by curl.
 
   RFC 2068 - HTTP 1.1 (obsoleted by RFC 2616)
 
+  RFC 2104 - Keyed-Hashing for Message Authentication
+
   RFC 2109 - HTTP State Management Mechanism (cookie stuff)
            - Also, read Netscape's specification at
              http://curl.haxx.se/rfc/cookie_spec.html
 
   RFC 2183 - The Content-Disposition Header Field
 
+  RFC 2195 - CRAM-MD5 authentication
+
   RFC 2229 - A Dictionary Server Protocol
 
   RFC 2255 - Newer LDAP URL syntax document.
@@ -73,3 +77,7 @@ This document lists documents and standards used by curl.
   RFC 2965 - HTTP State Management Mechanism. Cookies. Obsoletes RFC2109
 
   RFC 3207 - SMTP over TLS
+
+  RFC 4616 - PLAIN authentication
+
+  RFC 4954 - SMTP Authentication

docs/THANKS

@@ -8,12 +8,14 @@ Aaron Oneal
 Adam D. Moss
 Adam Piggott
 Adrian Schuur
+Akos Pasztory
 Alan Pinstein
 Albert Chin-A-Young
 Albert Choy
 Ale Vesely
 Aleksandar Milivojevic
 Alessandro Vesely
+Alex Bligh
 Alex Fishman
 Alex Neblett
 Alex Suykov
@@ -41,6 +43,7 @@ Andreas Olsson
 Andreas Rieke
 Andreas Schuldei
 Andreas Wurf
+Andrei Benea
 Andres Garcia
 Andrew Benham
 Andrew Biggs
@@ -81,6 +84,7 @@ Bill Hoffman
 Bjorn Augustsson
 Bjorn Reese
 Bj<EFBFBD>rn Stenberg
+Bob Richmond
 Bob Schader
 Bogdan Nicula
 Brad Burdick
@@ -118,6 +122,7 @@ Christian Schmitz
 Christian Vogt
 Christophe Demory
 Christophe Legry
+Christopher Conroy
 Christopher Palow
 Christopher R. Palmer
 Ciprian Badescu
@@ -200,7 +205,9 @@ Dominick Meglio
 Doug Kaufman
 Doug Porter
 Douglas E. Wegscheid
+Douglas Kilpatrick
 Douglas R. Horner
+Douglas Steinwand
 Dov Murik
 Duane Cathey
 Duncan Mac-Vicar Prett
@@ -222,6 +229,7 @@ Eric Cooper
 Eric Landes
 Eric Lavigne
 Eric Melville
+Eric Mertens
 Eric Rautman
 Eric Thelin
 Eric Vergnaud
@@ -243,6 +251,7 @@ Forrest Cahoon
 Frank Hempel
 Frank Keeney
 Frank McGeough
+Frank Meier
 Frank Ticheler
 Fred Machado
 Fred New
@@ -291,9 +300,12 @@ Hans Steegers
 Hans-Jurgen May
 Hardeep Singh
 Harshal Pradhan
+Hauke Duden
 Heikki Korpela
 Henrik Storner
 Hidemoto Nakada
+Hoi-Ho Chan
+Howard Chu
 Hzhijun
 Ian Ford
 Ian Gulliver
@@ -310,8 +322,10 @@ Immanuel Gregoire
 Ingmar Runge
 Ingo Ralf Blum
 Ingo Wilken
+Jack Zhang
 Jacky Lam
 Jacob Meuser
+Jacob Moshenko
 Jad Chamcham
 James Bursa
 James Cheng
@@ -327,6 +341,7 @@ Jamie Wilkinson
 Jan Kunder
 Jared Lundell
 Jari Sundell
+Jason McDonald
 Jason S. Priebe
 Jay Austin
 Jayesh A Shah
@@ -345,6 +360,7 @@ Jeff Weber
 Jeffrey Pohlmeyer
 Jeremy Friesner
 Jerome Muffat-Meridol
+Jerome Vouillon
 Jes Badwal
 Jesper Jensen
 Jesse Noller
@@ -369,6 +385,7 @@ John Lightsey
 John McGowan
 John P. McCaskey
 John Wilkinson
+John-Mark Bell
 Johnny Luong
 Jon Grubbs
 Jon Nelson
@@ -396,6 +413,7 @@ J
 J<EFBFBD>rn Hartroth
 Kai Sommerfeld
 Kai-Uwe Rommel
+Kalle Vahlman
 Kamil Dudka
 Kang-Jin Lee
 Karl Moerder
@@ -408,6 +426,7 @@ Keith McGuigan
 Keith Mok
 Ken Hirsch
 Ken Rastatter
+Kenny To
 Kent Boortz
 Keshav Krity
 Kevin Baughman
@@ -471,24 +490,28 @@ Mark Eichin
 Mark Incley
 Mark Karpeles
 Mark Lentczner
+Markus Duft
 Markus Koetter
 Markus Moeller
 Markus Oberhumer
 Martijn Koster
 Martin C. Martin
 Martin Drasar
+Martin Hager
 Martin Hedenfalk
 Martin Skinner
 Martin Storsjo
 Marty Kuhrt
 Maruko
 Massimiliano Ziccardi
+Massimo Callegari
 Mateusz Loskot
 Mathias Axelsson
 Mats Lidell
 Matt Kraai
 Matt Veenstra
 Matt Witherspoon
+Matt Wixson
 Matthew Blain
 Matthew Clarke
 Maurice Barnum
@@ -554,18 +577,21 @@ Olaf St
 Oren Tirosh
 P R Schaffner
 Pascal Terjan
+Pat Ray
 Patrick Bihan-Faou
 Patrick Monnerat
 Patrick Scott
 Patrick Smith
 Patrik Thunstrom
 Paul Harrington
+Paul Howarth
 Paul Marquis
 Paul Moore
 Paul Nolan
 Paul Querna
 Pavel Cenek
 Pavel Orehov
+Pavel Raiskup
 Pawel A. Gajda
 Pawel Kierski
 Pedro Neves
@@ -601,6 +627,7 @@ Puneet Pawaia
 Quagmire
 Rafa Muyo
 Rafael Sagula
+Rainer Canavan
 Rainer Koenig
 Ralf S. Engelschall
 Ralph Beckmann
@@ -651,6 +678,8 @@ Ron Zapp
 Rosimildo da Silva
 Roy Shan
 Rune Kleveland
+Ruslan Gazizov
+Ryan Chan
 Ryan Nelson
 S. Moonesamy
 Salvador D<>vila
@@ -703,6 +732,7 @@ Steve Oliphant
 Steve Roskowski
 Steven Bazyl
 Steven G. Johnson
+Steven M. Schweda
 Stoned Elipot
 Sven Anders
 Sven Neuhaus
@@ -714,6 +744,7 @@ Tanguy Fautre
 Temprimus
 Thomas J. Moore
 Thomas Klausner
+Thomas Lopatic
 Thomas Schwinge
 Thomas Tonino
 Tim Ansell
@@ -727,6 +758,7 @@ Toby Peterson
 Todd Kulesza
 Todd Vierling
 Tom Benoist
+Tom Donovan
 Tom Lee
 Tom Mattison
 Tom Moers

docs/TODO

@@ -22,12 +22,13 @@
  2.2 Remove easy interface internally
  2.3 Avoid having to remove/readd handles
  2.4 Fix HTTP Pipelining for PUT
+ 2.5 Make curl_multi_info_read faster
 
  3. Documentation
  3.1  More and better
 
  4. FTP
- 4.1 PRET
+ 4.1 HOST
  4.2 Alter passive/active on failure and retry
  4.3 Earlier bad letter detection
  4.4 REST for large files
@@ -60,28 +61,23 @@
  8. GnuTLS
  8.1 SSL engine stuff
  8.2 SRP
- 8.3 non-blocking
- 8.4 check connection
+ 8.3 check connection
 
  9. Other protocols
- 9.1 ditch ldap-specific select
 
  10. New protocols
- 10.1 RTSP
- 10.2 RSYNC
- 10.3 RTMP
+ 10.1 RSYNC
+ 10.2 RTMP
 
  11. Client
- 11.1 Content-Disposition
- 11.2 sync
- 11.3 glob posts
- 11.4 prevent file overwriting
- 11.5 ftp wildcard download
- 11.6 simultaneous parallel transfers
- 11.7 provide formpost headers
- 11.8 url-specific options
- 11.9 metalink support
- 11.10 warning when setting an option
+ 11.1 sync
+ 11.2 glob posts
+ 11.3 prevent file overwriting
+ 11.4 simultaneous parallel transfers
+ 11.5 provide formpost headers
+ 11.6 url-specific options
+ 11.7 metalink support
+ 11.8 warning when setting an option
 
  12. Build
  12.1 roffit
@@ -148,7 +144,6 @@
  EWOULDBLOCK or similar. Blocking cases include:
 
  - Name resolves on non-windows unless c-ares is used
- - GnuTLS SSL connections
  - NSS SSL connections
  - Active FTP connections
  - HTTP proxy CONNECT operations
@@ -190,6 +185,10 @@
  serial requests and currently libcurl only supports that for HEAD and GET
  requests but it should also be possible for PUT.
 
+2.5 Make curl_multi_info_read faster
+
+ When checking if there's info to return, this function scans over ALL added
+ easy handles every time. That makes this function unnecessary heavy and slow.
 
 3. Documentation
 
@@ -199,12 +198,12 @@
 
 4. FTP
 
-4.1 PRET
+4.1 HOST
 
- PRET is a command that primarily "drftpd" supports, which could be useful
- when using libcurl against such a server. It is a non-standard and a rather
- oddly designed command, but...
- http://curl.haxx.se/bug/feature.cgi?id=1729967
+ HOST is a suggested command in the works for a client to tell which host name
+ to use, to offer FTP servers named-based virtual hosting:
+
+ http://tools.ietf.org/html/draft-hethmon-mcmurray-ftp-hosts-11
 
 4.2 Alter passive/active on failure and retry
 
@@ -362,39 +361,21 @@ to provide the data to send.
  Work out a common method with Peter Sylvester's OpenSSL-patch for SRP on the
  TLS to provide name and password. GnuTLS already supports it...
 
-8.3 non-blocking
-
- Fix the connection phase to be non-blocking when multi interface is used
-
-8.4 check connection
+8.3 check connection
 
  Add a way to check if the connection seems to be alive, to correspond to the
  SSL_peak() way we use with OpenSSL.
 
 9. Other protocols
 
-9.1 ditch ldap-specific select
-
- * Look over the implementation. The looping will have to "go away" from the
-   lib/ldap.c source file and get moved to the main network code so that the
-   multi interface and friends will work for LDAP as well.
-
-9.2 stop TFTP blocking
-
-  Stop TFTP from being blocking and doing its own read loop in tftp_do.
-
 10. New protocols
 
-10.1 RTSP
-
- RFC2326 (protocol - very HTTP-like, also contains URL description)
-
-10.2 RSYNC
+10.1 RSYNC
 
  There's no RFC for protocol nor URI/URL format.  An implementation should
  most probably use an existing rsync library, such as librsync.
 
-10.3 RTMP
+10.2 RTMP
 
  There exists a patch that claims to introduce this protocol:
  http://osdir.com/ml/gnu.gnash.devel2/2006-11/msg00278.html, further details
@@ -402,14 +383,7 @@ to provide the data to send.
 
 11. Client
 
-11.1 Content-Disposition
-
- Add option that is similar to -O but that takes the output file name from the
- Content-Disposition: header, and/or uses the local file name used in
- redirections for the cases the server bounces the request further to a
- different file (name): http://curl.haxx.se/bug/feature.cgi?id=1364676
-
-11.2 sync
+11.1 sync
 
  "curl --sync http://example.com/feed[1-100].rss" or
  "curl --sync http://example.net/{index,calendar,history}.html"
@@ -418,12 +392,12 @@ to provide the data to send.
  remote file is newer than the local file. A Last-Modified HTTP date header
  should also be used to set the mod date on the downloaded file.
 
-11.3 glob posts
+11.2 glob posts
 
  Globbing support for -d and -F, as in 'curl -d "name=foo[0-9]" URL'.
  This is easily scripted though.
 
-11.4 prevent file overwriting
+11.3 prevent file overwriting
 
  Add an option that prevents cURL from overwriting existing local files. When
  used, and there already is an existing file with the target file name
@@ -431,18 +405,14 @@ to provide the data to send.
  existing). So that index.html becomes first index.html.1 and then
  index.html.2 etc.
 
-11.5 ftp wildcard download
-
- "curl ftp://site.com/*.txt"
-
-11.6 simultaneous parallel transfers
+11.4 simultaneous parallel transfers
 
  The client could be told to use maximum N simultaneous parallel transfers and
  then just make sure that happens. It should of course not make more than one
  connection to the same remote host. This would require the client to use the
  multi interface. http://curl.haxx.se/bug/feature.cgi?id=1558595
 
-11.7 provide formpost headers
+11.5 provide formpost headers
 
  Extending the capabilities of the multipart formposting. How about leaving
  the ';type=foo' syntax as it is and adding an extra tag (headers) which
@@ -456,7 +426,7 @@ to provide the data to send.
  which should overwrite the program reasonable defaults (plain/text,
  8bit...)
 
-11.8 url-specific options
+11.6 url-specific options
 
  Provide a way to make options bound to a specific URL among several on the
  command line. Possibly by letting ':' separate options between URLs,
@@ -470,12 +440,12 @@ to provide the data to send.
 
  The example would do a POST-GET-POST combination on a single command line.
 
-11.9 metalink support
+11.7 metalink support
 
  Add metalink support to curl (http://www.metalinker.org/). This is most useful
  with simultaneous parallel transfers (11.6) but not necessary.
 
-11.10 warning when setting an option
+11.8 warning when setting an option
 
   Display a warning when libcurl returns an error when setting an option.
   This can be useful to tell when support for a particular feature hasn't been

docs/curl.1

@@ -927,6 +927,52 @@ in web browsers, so curl does the conversion by default to maintain
 consistency. However, a server may require a POST to remain a POST after such
 a redirection. This option is meaningful only when using \fI-L/--location\fP
 (Added in 7.19.1)
+.IP "--proto <protocols>"
+Tells curl to use the listed protocols for its initial retrieval. Protocols
+are evaluated left to right, are comma separated, and are each a protocol
+name or 'all', optionally prefixed by zero or more modifiers. Available
+modifiers are:
+.RS
+.TP 3
+.B +
+Permit this protocol in addition to protocols already permitted (this is
+the default if no modifier is used).
+.TP
+.B -
+Deny this protocol, removing it from the list of protocols already permitted.
+.TP
+.B =
+Permit only this protocol (ignoring the list already permitted), though
+subject to later modification by subsequent entries in the comma separated
+list.
+.RE
+.IP
+For example:
+.RS
+.TP 15
+.B --proto -ftps
+uses the default protocols, but disables ftps
+.TP
+.B  --proto -all,https,+http
+only enables http and https
+.TP
+.B --proto =http,https
+also only enables http and https
+.RE
+.IP
+Unknown protocols produce a warning. This allows scripts to safely rely on
+being able to disable potentially dangerous protocols, without relying upon
+support for that protocol being built into curl to avoid an error.
+
+This option can be used multiple times, in which case the effect is the same
+as concatenating the protocols into one instance of the option.
+
+(Added in 7.20.2)
+.IP "--proto-redir <protocols>"
+Tells curl to use the listed protocols after a redirect. See --proto for
+how protocols are represented.
+
+(Added in 7.20.2)
 .IP "--proxy-anyauth"
 Tells curl to pick a suitable authentication method when communicating with
 the given proxy. This might cause an extra request/response round-trip. (Added

docs/examples/.gitignore

@@ -0,0 +1,32 @@
+10-at-a-time
+anyauthput
+certinfo
+chkspeed
+cookie_interface
+debug
+fileupload
+fopen
+ftp-wildcard
+ftpget
+ftpgetinfo
+ftpgetresp
+ftpupload
+getinfo
+getinmemory
+http-post
+httpcustomheader
+httpput
+https
+multi-app
+multi-debugcallback
+multi-double
+multi-post
+multi-single
+persistant
+post-callback
+postit2
+sendrecv
+sepheaders
+simple
+simplepost
+simplessl

docs/examples/Makefile.inc

@@ -1,16 +1,12 @@
 # These are all libcurl example programs to be test compiled
-check_PROGRAMS = 10-at-a-time anyauthput cookie_interface \
-  debug fileupload fopen ftpget ftpgetresp ftpupload \
-  getinfo getinmemory http-post httpput \
-  https multi-app multi-debugcallback multi-double \
-  multi-post multi-single persistant post-callback \
-  postit2 sepheaders simple simplepost simplessl \
-  sendrecv httpcustomheader certinfo chkspeed ftpgetinfo
+check_PROGRAMS = 10-at-a-time anyauthput cookie_interface debug fileupload \
+  fopen ftpget ftpgetresp ftpupload getinfo getinmemory http-post httpput  \
+  https multi-app multi-debugcallback multi-double multi-post multi-single \
+  persistant post-callback postit2 sepheaders simple simplepost simplessl  \
+  sendrecv httpcustomheader certinfo chkspeed ftpgetinfo ftp-wildcard
 
 # These examples require external dependencies that may not be commonly
 # available on POSIX systems, so don't bother attempting to compile them here.
-COMPLICATED_EXAMPLES = \
- curlgtk.c curlx.c htmltitle.cc cacertinmem.c ftpuploadresume.c \
- ghiper.c hiperfifo.c htmltidy.c multithread.c \
- opensslthreadlock.c sampleconv.c synctime.c threaded-ssl.c evhiperfifo.c
-
+COMPLICATED_EXAMPLES = curlgtk.c curlx.c htmltitle.cc cacertinmem.c	   \
+  ftpuploadresume.c ghiper.c hiperfifo.c htmltidy.c multithread.c	   \
+  opensslthreadlock.c sampleconv.c synctime.c threaded-ssl.c evhiperfifo.c

docs/examples/chkspeed.c

@@ -40,6 +40,8 @@ static size_t WriteCallback(void *ptr, size_t size, size_t nmemb, void *data)
 {
   /* we are not interested in the downloaded bytes itself,
      so we only return the size we would have saved ... */
+  (void)ptr;  /* unused */
+  (void)data; /* unused */
   return (size_t)(size * nmemb);
 }
 
@@ -48,7 +50,7 @@ int main(int argc, char *argv[])
   CURL *curl_handle;
   CURLcode res;
   int prtsep = 0, prttime = 0;
-  char *url = URL_1M;
+  const char *url = URL_1M;
   char *appname = argv[0];
 
   if (argc > 1) {
@@ -135,17 +137,17 @@ int main(int argc, char *argv[])
 
     /* check for bytes downloaded */
     res = curl_easy_getinfo(curl_handle, CURLINFO_SIZE_DOWNLOAD, &val);
-    if((CURLE_OK == res) && val)
+    if((CURLE_OK == res) && (val>0))
       printf("Data downloaded: %0.0f bytes.\n", val);
 
     /* check for total download time */
     res = curl_easy_getinfo(curl_handle, CURLINFO_TOTAL_TIME, &val);
-    if((CURLE_OK == res) && val)
+    if((CURLE_OK == res) && (val>0))
       printf("Total download time: %0.3f sec.\n", val);
 
     /* check for average download speed */
     res = curl_easy_getinfo(curl_handle, CURLINFO_SPEED_DOWNLOAD, &val);
-    if((CURLE_OK == res) && val)
+    if((CURLE_OK == res) && (val>0))
       printf("Average download speed: %0.3f kbyte/sec.\n", val / 1024);
 
   } else {

docs/examples/fopen.c

@@ -131,7 +131,6 @@ fill_buffer(URL_FILE *file,int want,int waittime)
     fd_set fdread;
     fd_set fdwrite;
     fd_set fdexcep;
-    int maxfd;
     struct timeval timeout;
     int rc;
 
@@ -144,6 +143,9 @@ fill_buffer(URL_FILE *file,int want,int waittime)
     /* attempt to fill buffer */
     do
     {
+        int maxfd = -1;
+        long curl_timeo = -1;
+
         FD_ZERO(&fdread);
         FD_ZERO(&fdwrite);
         FD_ZERO(&fdexcep);
@@ -152,12 +154,23 @@ fill_buffer(URL_FILE *file,int want,int waittime)
         timeout.tv_sec = 60; /* 1 minute */
         timeout.tv_usec = 0;
 
+        curl_multi_timeout(multi_handle, &curl_timeo);
+        if(curl_timeo >= 0) {
+          timeout.tv_sec = curl_timeo / 1000;
+          if(timeout.tv_sec > 1)
+            timeout.tv_sec = 1;
+          else
+            timeout.tv_usec = (curl_timeo % 1000) * 1000;
+        }
+
         /* get file descriptors from the transfers */
         curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
         /* In a real-world program you OF COURSE check the return code of the
-           function calls, *and* you make sure that maxfd is bigger than -1
-           so that the call to select() below makes sense! */
+           function calls.  On success, the value of maxfd is guaranteed to be
+           greater or equal than -1.  We call select(maxfd + 1, ...), specially
+           in case of (maxfd == -1), we call select(0, ...), which is basically
+           equal to sleep. */
 
         rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 

docs/examples/ftp-wildcard.c

@@ -0,0 +1,136 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ */
+
+#include <curl/curl.h>
+#include <stdio.h>
+
+struct callback_data {
+  FILE *output;
+};
+
+static long file_is_comming(struct curl_fileinfo *finfo,
+                            struct callback_data *data,
+                            int remains);
+
+static long file_is_downloaded(struct callback_data *data);
+
+static size_t write_it(char *buff, size_t size, size_t nmemb,
+                       struct callback_data *data);
+
+int main(int argc, char **argv)
+{
+  int rc = CURLE_OK;
+
+  /* curl easy handle */
+  CURL *handle;
+
+  /* help data */
+  struct callback_data data = { 0 };
+
+  /* global initialization */
+  rc = curl_global_init(CURL_GLOBAL_ALL);
+  if(rc)
+    return rc;
+
+  /* initialization of easy handle */
+  handle = curl_easy_init();
+  if(!handle) {
+    curl_global_cleanup();
+    return CURLE_OUT_OF_MEMORY;
+  }
+
+  /* turn on wildcard matching */
+  curl_easy_setopt(handle, CURLOPT_WILDCARDMATCH, 1L);
+
+  /* callback is called before download of concrete file started */
+  curl_easy_setopt(handle, CURLOPT_CHUNK_BGN_FUNCTION, file_is_comming);
+
+  /* callback is called after data from the file have been transferred */
+  curl_easy_setopt(handle, CURLOPT_CHUNK_END_FUNCTION, file_is_downloaded);
+
+  /* this callback will write contents into files */
+  curl_easy_setopt(handle, CURLOPT_WRITEFUNCTION, write_it);
+
+  /* put transfer data into callbacks */
+  curl_easy_setopt(handle, CURLOPT_CHUNK_DATA, &data);
+  curl_easy_setopt(handle, CURLOPT_WRITEDATA, &data);
+
+  /* curl_easy_setopt(handle, CURLOPT_VERBOSE, 1L); */
+
+  /* set an URL containing wildcard pattern (only in the last part) */
+  if(argc == 2)
+    curl_easy_setopt(handle, CURLOPT_URL, argv[1]);
+  else
+    curl_easy_setopt(handle, CURLOPT_URL,
+      "ftp://curltest.howto.cz:123456@curltest.howto.cz/test/*");
+
+  /* and start transfer! */
+  rc = curl_easy_perform(handle);
+
+  curl_easy_cleanup(handle);
+  curl_global_cleanup();
+  return rc;
+}
+
+static long file_is_comming(struct curl_fileinfo *finfo,
+                            struct callback_data *data,
+                            int remains)
+{
+  printf("%3d %40s %10luB ", remains, finfo->filename,
+         (unsigned long)finfo->size);
+
+  switch(finfo->filetype) {
+  case CURLFILETYPE_DIRECTORY:
+    printf(" DIR\n");
+    break;
+  case CURLFILETYPE_FILE:
+    printf("FILE ");
+    break;
+  default:
+    printf("OTHER\n");
+    break;
+  }
+
+  if(finfo->filetype == CURLFILETYPE_FILE) {
+    /* do not transfer files >= 50B */
+    if(finfo->size > 50) {
+      printf("SKIPPED\n");
+      return CURL_CHUNK_BGN_FUNC_SKIP;
+    }
+
+    data->output = fopen(finfo->filename, "w");
+    if(!data->output) {
+      return CURL_CHUNK_BGN_FUNC_FAIL;
+    }
+  }
+
+  return CURL_CHUNK_BGN_FUNC_OK;
+}
+
+static long file_is_downloaded(struct callback_data *data)
+{
+  if(data->output) {
+    printf("DOWNLOADED\n");
+    fclose(data->output);
+    data->output = 0x0;
+  }
+  return CURL_CHUNK_END_FUNC_OK;
+}
+
+static size_t write_it(char *buff, size_t size, size_t nmemb,
+                       struct callback_data *data)
+{
+  size_t written = 0;
+  if(data->output)
+    written = fwrite(buff, size, nmemb, data->output);
+  else
+    /* listing output */
+    written = fwrite(buff, size, nmemb, stdout);
+  return written;
+}

docs/examples/multi-app.c

@@ -66,7 +66,9 @@ int main(int argc, char **argv)
     fd_set fdread;
     fd_set fdwrite;
     fd_set fdexcep;
-    int maxfd;
+    int maxfd = -1;
+
+    long curl_timeo = -1;
 
     FD_ZERO(&fdread);
     FD_ZERO(&fdwrite);
@@ -76,12 +78,23 @@ int main(int argc, char **argv)
     timeout.tv_sec = 1;
     timeout.tv_usec = 0;
 
+    curl_multi_timeout(multi_handle, &curl_timeo);
+    if(curl_timeo >= 0) {
+      timeout.tv_sec = curl_timeo / 1000;
+      if(timeout.tv_sec > 1)
+        timeout.tv_sec = 1;
+      else
+        timeout.tv_usec = (curl_timeo % 1000) * 1000;
+    }
+
     /* get file descriptors from the transfers */
     curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
     /* In a real-world program you OF COURSE check the return code of the
-       function calls, *and* you make sure that maxfd is bigger than -1 so
-       that the call to select() below makes sense! */
+       function calls.  On success, the value of maxfd is guaranteed to be
+       greater or equal than -1.  We call select(maxfd + 1, ...), specially in
+       case of (maxfd == -1), we call select(0, ...), which is basically equal
+       to sleep. */
 
     rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 

docs/examples/multi-debugcallback.c

@@ -140,7 +140,9 @@ int main(int argc, char **argv)
     fd_set fdread;
     fd_set fdwrite;
     fd_set fdexcep;
-    int maxfd;
+    int maxfd = -1;
+
+    long curl_timeo = -1;
 
     FD_ZERO(&fdread);
     FD_ZERO(&fdwrite);
@@ -150,12 +152,23 @@ int main(int argc, char **argv)
     timeout.tv_sec = 1;
     timeout.tv_usec = 0;
 
+    curl_multi_timeout(multi_handle, &curl_timeo);
+    if(curl_timeo >= 0) {
+      timeout.tv_sec = curl_timeo / 1000;
+      if(timeout.tv_sec > 1)
+        timeout.tv_sec = 1;
+      else
+        timeout.tv_usec = (curl_timeo % 1000) * 1000;
+    }
+
     /* get file descriptors from the transfers */
     curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
     /* In a real-world program you OF COURSE check the return code of the
-       function calls, *and* you make sure that maxfd is bigger than -1
-       so that the call to select() below makes sense! */
+       function calls.  On success, the value of maxfd is guaranteed to be
+       greater or equal than -1.  We call select(maxfd + 1, ...), specially in
+       case of (maxfd == -1), we call select(0, ...), which is basically equal
+       to sleep. */
 
     rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 

docs/examples/multi-double.c

@@ -57,7 +57,9 @@ int main(int argc, char **argv)
     fd_set fdread;
     fd_set fdwrite;
     fd_set fdexcep;
-    int maxfd;
+    int maxfd = -1;
+
+    long curl_timeo = -1;
 
     FD_ZERO(&fdread);
     FD_ZERO(&fdwrite);
@@ -67,12 +69,23 @@ int main(int argc, char **argv)
     timeout.tv_sec = 1;
     timeout.tv_usec = 0;
 
+    curl_multi_timeout(multi_handle, &curl_timeo);
+    if(curl_timeo >= 0) {
+      timeout.tv_sec = curl_timeo / 1000;
+      if(timeout.tv_sec > 1)
+        timeout.tv_sec = 1;
+      else
+        timeout.tv_usec = (curl_timeo % 1000) * 1000;
+    }
+
     /* get file descriptors from the transfers */
     curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
     /* In a real-world program you OF COURSE check the return code of the
-       function calls, *and* you make sure that maxfd is bigger than -1 so
-       that the call to select() below makes sense! */
+       function calls.  On success, the value of maxfd is guaranteed to be
+       greater or equal than -1.  We call select(maxfd + 1, ...), specially in
+       case of (maxfd == -1), we call select(0, ...), which is basically equal
+       to sleep. */
 
     rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 

docs/examples/multi-post.c

@@ -77,7 +77,9 @@ int main(int argc, char *argv[])
       fd_set fdread;
       fd_set fdwrite;
       fd_set fdexcep;
-      int maxfd;
+      int maxfd = -1;
+
+      long curl_timeo = -1;
 
       FD_ZERO(&fdread);
       FD_ZERO(&fdwrite);
@@ -87,12 +89,23 @@ int main(int argc, char *argv[])
       timeout.tv_sec = 1;
       timeout.tv_usec = 0;
 
+      curl_multi_timeout(multi_handle, &curl_timeo);
+      if(curl_timeo >= 0) {
+        timeout.tv_sec = curl_timeo / 1000;
+        if(timeout.tv_sec > 1)
+          timeout.tv_sec = 1;
+        else
+          timeout.tv_usec = (curl_timeo % 1000) * 1000;
+      }
+
       /* get file descriptors from the transfers */
       curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
       /* In a real-world program you OF COURSE check the return code of the
-         function calls, *and* you make sure that maxfd is bigger than -1
-         so that the call to select() below makes sense! */
+         function calls.  On success, the value of maxfd is guaranteed to be
+         greater or equal than -1.  We call select(maxfd + 1, ...), specially in
+         case of (maxfd == -1), we call select(0, ...), which is basically equal
+         to sleep. */
 
       rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 

docs/examples/multi-single.c

@@ -51,7 +51,9 @@ int main(int argc, char **argv)
     fd_set fdread;
     fd_set fdwrite;
     fd_set fdexcep;
-    int maxfd;
+    int maxfd = -1;
+
+    long curl_timeo = -1;
 
     FD_ZERO(&fdread);
     FD_ZERO(&fdwrite);
@@ -61,12 +63,23 @@ int main(int argc, char **argv)
     timeout.tv_sec = 1;
     timeout.tv_usec = 0;
 
+    curl_multi_timeout(multi_handle, &curl_timeo);
+    if(curl_timeo >= 0) {
+      timeout.tv_sec = curl_timeo / 1000;
+      if(timeout.tv_sec > 1)
+        timeout.tv_sec = 1;
+      else
+        timeout.tv_usec = (curl_timeo % 1000) * 1000;
+    }
+
     /* get file descriptors from the transfers */
     curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
 
     /* In a real-world program you OF COURSE check the return code of the
-       function calls, *and* you make sure that maxfd is bigger than -1 so
-       that the call to select() below makes sense! */
+       function calls.  On success, the value of maxfd is guaranteed to be
+       greater or equal than -1.  We call select(maxfd + 1, ...), specially in
+       case of (maxfd == -1), we call select(0, ...), which is basically equal
+       to sleep. */
 
     rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 

docs/libcurl/.gitignore

@@ -0,0 +1,2 @@
+*.html
+*.pdf

docs/libcurl/curl_easy_getinfo.3

@@ -173,6 +173,17 @@ string holding the IP address of the most recent connection done with this
 \fBcurl\fP handle. This string may be IPv6 if that's enabled. Note that you
 get a pointer to a memory area that will be re-used at next request so you
 need to copy the string if you want to keep the information. (Added in 7.19.0)
+.IP CURLINFO_PRIMARY_PORT
+Pass a pointer to a long to receive the destination port of the most recent
+connection done with this \fBcurl\fP handle. (Added in 7.21.0)
+.IP CURLINFO_LOCAL_IP
+Pass a pointer to a char pointer to receive the pointer to a zero-terminated
+string holding the local (source) IP address of the most recent connection done
+with this \fBcurl\fP handle. This string may be IPv6 if that's enabled. The
+same restrictions apply as to \fICURLINFO_PRIMARY_IP\fP. (Added in 7.21.0)
+.IP CURLINFO_LOCAL_PORT
+Pass a pointer to a long to receive the local (source) port of the most recent
+connection done with this \fBcurl\fP handle. (Added in 7.21.0)
 .IP CURLINFO_COOKIELIST
 Pass a pointer to a 'struct curl_slist *' to receive a linked-list of all
 cookies cURL knows (expired ones, too). Don't forget to
@@ -187,6 +198,9 @@ working with the socket, you must call curl_easy_cleanup() as usual and let
 libcurl close the socket and cleanup other resources associated with the
 handle. This is typically used in combination with \fICURLOPT_CONNECT_ONLY\fP.
 (Added in 7.15.2)
+
+NOTE: this API is not really working on win64, since the SOCKET type on win64
+is 64 bit large while its 'long' is only 32 bits.
 .IP CURLINFO_FTP_ENTRY_PATH
 Pass a pointer to a char pointer to receive a pointer to a string holding the
 path of the entry path. That is the initial path libcurl ended up in when

docs/libcurl/curl_easy_setopt.3

@@ -84,11 +84,61 @@ If this option is set and libcurl has been built with the standard name
 resolver, timeouts will not occur while the name resolve takes place.
 Consider building libcurl with c-ares support to enable asynchronous DNS
 lookups, which enables nice timeouts for name resolves without signals.
+.IP CURLOPT_WILDCARDMATCH
+Set this option to 1 if you want to transfer multiple files according to a
+file name pattern. The pattern can be specified as part of the
+\fICURLOPT_URL\fP option, using an fnmatch-like pattern (Shell Pattern
+Matching) in the last part of URL (file name).
+
+By default, libcurl uses its internal wildcard matching implementation. You
+can provide your own matching function by the \fICURLOPT_FNMATCH_FUNCTION\fP
+option.
+
+This feature is only supported by the FTP download for now.
+
+A brief introduction of its syntax follows:
+.RS
+.IP "\fB*\fP - ASTERISK"
+\&ftp://example.com/some/path/\fB*.txt\fP (for all txt's from the root
+directory)
+.RE
+.RS
+.IP "\fB?\fP - QUESTION MARK"
+Question mark matches any (exactly one) character.
+
+\&ftp://example.com/some/path/\fBphoto?.jpeg\fP
+.RE
+.RS
+.IP "\fB[\fP - BRACKET EXPRESSION"
+The left bracket opens a bracket expression. The question mark and asterisk have
+no special meaning in a bracket expression. Each bracket expression ends by the
+right bracket and matches exactly one character. Some examples follow:
+
+\fB[a-zA-Z0\-9]\fP or \fB[f\-gF\-G]\fP \- character interval
+
+\fB[abc]\fP - character enumeration
+
+\fB[^abc]\fP or \fB[!abc]\fP - negation
+
+\fB[[:\fP\fIname\fP\fB:]]\fP class expression. Supported classes are
+\fBalnum\fP,\fBlower\fP, \fBspace\fP, \fBalpha\fP, \fBdigit\fP, \fBprint\fP,
+\fBupper\fP, \fBblank\fP, \fBgraph\fP, \fBxdigit\fP.
+
+\fB[][-!^]\fP - special case \- matches only '\-', ']', '[', '!' or '^'. These
+characters have no special purpose.
+
+\fB[\\[\\]\\\\]\fP - escape syntax. Matches '[', ']' or '\\'.
+
+Using the rules above, a file name pattern can be constructed:
+
+\&ftp://example.com/some/path/\fB[a-z[:upper:]\\\\].jpeg\fP
+.RE
 .PP
+(This was added in 7.21.0)
 .SH CALLBACK OPTIONS
 .IP CURLOPT_WRITEFUNCTION
 Function pointer that should match the following prototype: \fBsize_t
-function( void *ptr, size_t size, size_t nmemb, void *stream);\fP This
+function( void *ptr, size_t size, size_t nmemb, void *userdata);\fP This
 function gets called by libcurl as soon as there is data received that needs
 to be saved. The size of the data pointed to by \fIptr\fP is \fIsize\fP
 multiplied with \fInmemb\fP, it will not be zero terminated. Return the number
@@ -107,7 +157,7 @@ Set this option to NULL to get the internal default function. The internal
 default function will write the data to the FILE * given with
 \fICURLOPT_WRITEDATA\fP.
 
-Set the \fIstream\fP argument with the \fICURLOPT_WRITEDATA\fP option.
+Set the \fIuserdata\fP argument with the \fICURLOPT_WRITEDATA\fP option.
 
 The callback function will be passed as much data as possible in all invokes,
 but you cannot possibly make any assumptions. It may be one byte, it may be
@@ -130,7 +180,7 @@ This option is also known with the older name \fICURLOPT_FILE\fP, the name
 \fICURLOPT_WRITEDATA\fP was introduced in 7.9.7.
 .IP CURLOPT_READFUNCTION
 Function pointer that should match the following prototype: \fBsize_t
-function( void *ptr, size_t size, size_t nmemb, void *stream);\fP This
+function( void *ptr, size_t size, size_t nmemb, void *userdata);\fP This
 function gets called by libcurl as soon as it needs to read data in order to
 send it to the peer. The data area pointed at by the pointer \fIptr\fP may be
 filled with at most \fIsize\fP multiplied with \fInmemb\fP number of
@@ -151,9 +201,9 @@ From 7.18.0, the function can return CURL_READFUNC_PAUSE which then will cause
 reading from this connection to become paused. See \fIcurl_easy_pause(3)\fP
 for further details.
 
-If you set the callback pointer to NULL, or don't set it at all, the default
-internal read function will be used. It is simply doing an fread() on the FILE
-* stream set with \fICURLOPT_READDATA\fP.
+If you set this callback pointer to NULL, or don't set it at all, the default
+internal read function will be used. It is doing an fread() on the FILE *
+userdata set with \fICURLOPT_READDATA\fP.
 .IP CURLOPT_READDATA
 Data pointer to pass to the file read function. If you use the
 \fICURLOPT_READFUNCTION\fP option, this is the pointer you'll get as input. If
@@ -246,11 +296,11 @@ argument in the opensocket callback set with \fICURLOPT_OPENSOCKETFUNCTION\fP.
 Function pointer that should match the \fIcurl_progress_callback\fP prototype
 found in \fI<curl/curl.h>\fP. This function gets called by libcurl instead of
 its internal equivalent with a frequent interval during operation (roughly
-once per second) no matter if data is being transfered or not.  Unknown/unused
-argument values passed to the callback will be set to zero (like if you only
-download data, the upload size will remain 0). Returning a non-zero value from
-this callback will cause libcurl to abort the transfer and return
-\fICURLE_ABORTED_BY_CALLBACK\fP.
+once per second or sooner) no matter if data is being transfered or not.
+Unknown/unused argument values passed to the callback will be set to zero
+(like if you only download data, the upload size will remain 0). Returning a
+non-zero value from this callback will cause libcurl to abort the transfer and
+return \fICURLE_ABORTED_BY_CALLBACK\fP.
 
 If you transfer data with the multi interface, this function will not be
 called during periods of idleness unless you call the appropriate libcurl
@@ -263,13 +313,13 @@ Pass a pointer that will be untouched by libcurl and passed as the first
 argument in the progress callback set with \fICURLOPT_PROGRESSFUNCTION\fP.
 .IP CURLOPT_HEADERFUNCTION
 Function pointer that should match the following prototype: \fIsize_t
-function( void *ptr, size_t size, size_t nmemb, void *stream);\fP. This
+function( void *ptr, size_t size, size_t nmemb, void *userdata);\fP. This
 function gets called by libcurl as soon as it has received header data. The
 header callback will be called once for each header and only complete header
 lines are passed on to the callback. Parsing headers should be easy enough
 using this. The size of the data pointed to by \fIptr\fP is \fIsize\fP
 multiplied with \fInmemb\fP. Do not assume that the header line is zero
-terminated! The pointer named \fIstream\fP is the one you set with the
+terminated! The pointer named \fIuserdata\fP is the one you set with the
 \fICURLOPT_WRITEHEADER\fP option. The callback function must return the number
 of bytes actually taken care of. If that amount differs from the amount passed
 to your function, it'll signal an error to the library. This will abort the
@@ -402,7 +452,7 @@ You will need to override these definitions if they are different on your
 system.
 .IP CURLOPT_INTERLEAVEFUNCTION
 Function pointer that should match the following prototype: \fIsize_t
-function( void *ptr, size_t size, size_t nmemb, void *stream)\fP. This
+function( void *ptr, size_t size, size_t nmemb, void *userdata)\fP. This
 function gets called by libcurl as soon as it has received interleaved RTP
 data. This function gets called for each $ block and therefore contains
 exactly one upper-layer protocol unit (e.g.  one RTP packet). Curl writes the
@@ -422,8 +472,52 @@ request, (e.g.  \fICURL_RTSPREQ_PAUSE\fP) then the response handler will
 process any pending RTP data before marking the request as finished.  (Added
 in 7.20.0)
 .IP CURLOPT_INTERLEAVEDATA
-This is the stream that will be passed to \fICURLOPT_INTERLEAVEFUNCTION\fP when
-interleaved RTP data is received. (Added in 7.20.0)
+This is the userdata pointer that will be passed to
+\fICURLOPT_INTERLEAVEFUNCTION\fP when interleaved RTP data is received. (Added
+in 7.20.0)
+.IP CURLOPT_CHUNK_BGN_FUNCTION
+Function pointer that should match the following prototype: \fBlong function
+(const void *transfer_info, void *ptr, int remains)\fP. This function gets
+called by libcurl before a part of the stream is going to be transferred (if
+the transfer supports chunks).
+
+This callback makes sense only when using the \fICURLOPT_WILDCARDMATCH\fP
+option for now.
+
+The target of transfer_info parameter is a "feature depended" structure. For
+the FTP wildcard download, the target is curl_fileinfo structure (see
+\fIcurl/curl.h\fP).  The parameter ptr is a pointer given by
+\fICURLOPT_CHUNK_DATA\fP. The parameter remains contains number of chunks
+remaining per the transfer. If the feature is not available, the parameter has
+zero value.
+
+Return \fICURL_CHUNK_BGN_FUNC_OK\fP if everything is fine,
+\fICURL_CHUNK_BGN_FUNC_SKIP\fP if you want to skip the concrete chunk or
+\fICURL_CHUNK_BGN_FUNC_FAIL\fP to tell libcurl to stop if some error occurred.
+(This was added in 7.21.0)
+.IP CURLOPT_CHUNK_END_FUNCTION
+Function pointer that should match the following prototype: \fBlong
+function(void *ptr)\fP. This function gets called by libcurl as soon as a part
+of the stream has been transferred (or skipped).
+
+Return \fICURL_CHUNK_END_FUNC_OK\fP if everything is fine or
+\fBCURL_CHUNK_END_FUNC_FAIL\fP to tell the lib to stop if some error occurred.
+(This was added in 7.21.0)
+.IP CURLOPT_CHUNK_DATA
+Pass a pointer that will be untouched by libcurl and passed as the ptr
+argument to the \fICURL_CHUNK_BGN_FUNTION\fP and \fICURL_CHUNK_END_FUNTION\fP.
+(This was added in 7.21.0)
+.IP CURLOPT_FNMATCH_FUNCTION
+Function pointer that should match \fBint function(void *ptr, const char
+*pattern, const char *string)\fP prototype (see \fIcurl/curl.h\fP). It is used
+internally for the wildcard matching feature.
+
+Return \fICURL_FNMATCHFUNC_MATCH\fP if pattern matches the string,
+\fICURL_FNMATCHFUNC_NOMATCH\fP if not or \fICURL_FNMATCHFUNC_FAIL\fP if an
+error occurred.  (This was added in 7.21.0)
+.IP CURLOPT_FNMATCH_DATA
+Pass a pointer that will be untouched by libcurl and passed as the ptr argument
+to the \fICURL_FNMATCH_FUNCTION\fP. (This was added in 7.21.0)
 .SH ERROR OPTIONS
 .IP CURLOPT_ERRORBUFFER
 Pass a char * to a buffer that the libcurl may store human readable error

docs/libcurl/curl_multi_socket_action.3

@@ -112,14 +112,15 @@ timeout value to use when waiting for socket activities.
 them for activity. This can be done through your application code, or by way
 of an external library such as libevent or glib.
 
-6. Wait for activity on any of libcurl's sockets, use the timeout value your
+6. Call curl_multi_socket_action() to kickstart everything. To get one or more
+callbacks called.
+
+7. Wait for activity on any of libcurl's sockets, use the timeout value your
 callback has been told
 
-7, When activity is detected, call curl_multi_socket_action() for the
+8, When activity is detected, call curl_multi_socket_action() for the
 socket(s) that got action. If no activity is detected and the timeout expires,
 call \fIcurl_multi_socket_action(3)\fP with \fICURL_SOCKET_TIMEOUT\fP
-
-8. Go back to step 6.
 .SH AVAILABILITY
 This function was added in libcurl 7.15.4, and is deemed stable since 7.16.0.
 .SH "SEE ALSO"

docs/libcurl/libcurl-errors.3

@@ -218,6 +218,16 @@ return code is only returned from \fIcurl_easy_recv(3)\fP and
 Failed to load CRL file (Added in 7.19.0)
 .IP "CURLE_SSL_ISSUER_ERROR (83)"
 Issuer check failed (Added in 7.19.0)
+.IP "CURLE_FTP_PRET_FAILED (84)"
+PRET command failed
+.IP "CURLE_RTSP_CSEQ_ERROR (85)"
+Mismatch of RTSP CSeq numbers.
+.IP "CURLE_RTSP_SESSION_ERROR (86)"
+Mismatch of RTSP Session Identifiers.
+.IP "CURLE_FTP_BAD_FILE_LIST (87)"
+Unable to parse FTP file list (during FTP wildcard downloading).
+.IP "CURLE_CHUNK_FAILED (88)"
+Chunk callback reported error.
 .IP "CURLE_OBSOLETE*"
 These error codes will never be returned. They were used in an old libcurl
 version and are currently unused.

docs/libcurl/symbols-in-versions

@@ -151,11 +151,14 @@ CURLINFO_HTTPAUTH_AVAIL         7.10.8
 CURLINFO_HTTP_CODE              7.4.1         7.10.8
 CURLINFO_HTTP_CONNECTCODE       7.10.7
 CURLINFO_LASTSOCKET             7.15.2
+CURLINFO_LOCAL_IP               7.21.0
+CURLINFO_LOCAL_PORT             7.21.0
 CURLINFO_NAMELOOKUP_TIME        7.4.1
 CURLINFO_NUM_CONNECTS           7.12.3
 CURLINFO_OS_ERRNO               7.12.2
 CURLINFO_PRETRANSFER_TIME       7.4.1
 CURLINFO_PRIMARY_IP             7.19.0
+CURLINFO_PRIMARY_PORT           7.21.0
 CURLINFO_PRIVATE                7.10.3
 CURLINFO_PRIVATE                7.10.3
 CURLINFO_PROXYAUTH_AVAIL        7.10.8
@@ -188,6 +191,9 @@ CURLOPT_BUFFERSIZE              7.10
 CURLOPT_CAINFO                  7.4.2
 CURLOPT_CAPATH                  7.9.8
 CURLOPT_CERTINFO                7.19.1
+CURLOPT_CHUNK_BGN_FUNCTION      7.21.0
+CURLOPT_CHUNK_DATA              7.21.0
+CURLOPT_CHUNK_END_FUNCTION      7.21.0
 CURLOPT_CLOSEFUNCTION           7.7           7.11.1      7.15.4
 CURLOPT_CLOSEPOLICY             7.7           7.16.1
 CURLOPT_CONNECTTIMEOUT          7.7
@@ -217,6 +223,8 @@ CURLOPT_FAILONERROR             7.1
 CURLOPT_FILE                    7.1           7.9.7
 CURLOPT_FILETIME                7.5
 CURLOPT_FLAGS                   7.1           -           7.9.2
+CURLOPT_FNMATCH_DATA            7.21.0
+CURLOPT_FNMATCH_FUNCTION        7.21.0
 CURLOPT_FOLLOWLOCATION          7.1
 CURLOPT_FORBID_REUSE            7.7
 CURLOPT_FRESH_CONNECT           7.7
@@ -236,14 +244,6 @@ CURLOPT_FTP_SSL_CCC             7.16.1
 CURLOPT_FTP_USE_EPRT            7.10.5
 CURLOPT_FTP_USE_EPSV            7.9.2
 CURLOPT_FTP_USE_PRET            7.20.0
-CURLOPT_RTSP_REQUEST            7.20.0
-CURLOPT_RTSP_SESSION_ID         7.20.0
-CURLOPT_RTSP_STREAM_URI         7.20.0
-CURLOPT_RTSP_TRANSPORT          7.20.0
-CURLOPT_RTSP_CLIENT_CSEQ        7.20.0
-CURLOPT_RTSP_SERVER_CSEQ        7.20.0
-CURLOPT_INTERLEAVEDATA          7.20.0
-CURLOPT_INTERLEAVEFUNCTION      7.20.0
 CURLOPT_HEADER                  7.1
 CURLOPT_HEADERDATA              7.10
 CURLOPT_HEADERFUNCTION          7.7.2
@@ -262,6 +262,8 @@ CURLOPT_INFILE                  7.1           7.9.7
 CURLOPT_INFILESIZE              7.1
 CURLOPT_INFILESIZE_LARGE        7.11.0
 CURLOPT_INTERFACE               7.3
+CURLOPT_INTERLEAVEDATA          7.20.0
+CURLOPT_INTERLEAVEFUNCTION      7.20.0
 CURLOPT_IOCTLDATA               7.12.3
 CURLOPT_IOCTLFUNCTION           7.12.3
 CURLOPT_IPRESOLVE               7.10.8
@@ -328,6 +330,12 @@ CURLOPT_REDIR_PROTOCOLS         7.19.4
 CURLOPT_REFERER                 7.1
 CURLOPT_RESUME_FROM             7.1
 CURLOPT_RESUME_FROM_LARGE       7.11.0
+CURLOPT_RTSP_CLIENT_CSEQ        7.20.0
+CURLOPT_RTSP_REQUEST            7.20.0
+CURLOPT_RTSP_SERVER_CSEQ        7.20.0
+CURLOPT_RTSP_SESSION_ID         7.20.0
+CURLOPT_RTSP_STREAM_URI         7.20.0
+CURLOPT_RTSP_TRANSPORT          7.20.0
 CURLOPT_SEEKDATA                7.18.1
 CURLOPT_SEEKFUNCTION            7.18.1
 CURLOPT_SHARE                   7.10
@@ -380,6 +388,7 @@ CURLOPT_USERNAME                7.19.1
 CURLOPT_USERPWD                 7.1
 CURLOPT_USE_SSL                 7.17.0
 CURLOPT_VERBOSE                 7.1
+CURLOPT_WILDCARDMATCH           7.21.0
 CURLOPT_WRITEDATA               7.9.7
 CURLOPT_WRITEFUNCTION           7.1
 CURLOPT_WRITEHEADER             7.1
@@ -396,6 +405,12 @@ CURLPROTO_LDAP                  7.19.4
 CURLPROTO_LDAPS                 7.19.4
 CURLPROTO_POP3                  7.20.0
 CURLPROTO_POP3S                 7.20.0
+CURLPROTO_RTMP                  7.21.0
+CURLPROTO_RTMPE                 7.21.0
+CURLPROTO_RTMPS                 7.21.0
+CURLPROTO_RTMPT                 7.21.0
+CURLPROTO_RTMPTE                7.21.0
+CURLPROTO_RTMPTS                7.21.0
 CURLPROTO_RTSP                  7.20.0
 CURLPROTO_SCP                   7.19.4
 CURLPROTO_SFTP                  7.19.4
@@ -427,6 +442,14 @@ CURLVERSION_FIRST               7.10
 CURLVERSION_NOW                 7.10
 CURLVERSION_SECOND              7.11.1
 CURLVERSION_THIRD               7.12.0
+CURL_CHUNK_BGN_FUNC_FAIL        7.21.0
+CURL_CHUNK_BGN_FUNC_OK          7.21.0
+CURL_CHUNK_BGN_FUNC_SKIP        7.21.0
+CURL_CHUNK_END_FUNC_FAIL        7.21.0
+CURL_CHUNK_END_FUNC_OK          7.21.0
+CURL_FNMATCHFUNC_FAIL           7.21.0
+CURL_FNMATCHFUNC_MATCH          7.21.0
+CURL_FNMATCHFUNC_NOMATCH        7.21.0
 CURL_HTTP_VERSION_1_0           7.9.1
 CURL_HTTP_VERSION_1_1           7.9.1
 CURL_HTTP_VERSION_NONE          7.9.1

include/curl/.gitignore

@@ -1,3 +1,3 @@
 curlbuild.h
 stamp-h3
-
+curlver.h.dist

include/curl/curl.h

@@ -198,6 +198,97 @@ typedef size_t (*curl_write_callback)(char *buffer,
                                       size_t nitems,
                                       void *outstream);
 
+
+
+/* enumeration of file types */
+typedef enum {
+  CURLFILETYPE_FILE = 0,
+  CURLFILETYPE_DIRECTORY,
+  CURLFILETYPE_SYMLINK,
+  CURLFILETYPE_DEVICE_BLOCK,
+  CURLFILETYPE_DEVICE_CHAR,
+  CURLFILETYPE_NAMEDPIPE,
+  CURLFILETYPE_SOCKET,
+  CURLFILETYPE_DOOR, /* is possible only on Sun Solaris now */
+
+  CURLFILETYPE_UNKNOWN /* should never occur */
+} curlfiletype;
+
+#define CURLFINFOFLAG_KNOWN_FILENAME    (1<<0)
+#define CURLFINFOFLAG_KNOWN_FILETYPE    (1<<1)
+#define CURLFINFOFLAG_KNOWN_TIME        (1<<2)
+#define CURLFINFOFLAG_KNOWN_PERM        (1<<3)
+#define CURLFINFOFLAG_KNOWN_UID         (1<<4)
+#define CURLFINFOFLAG_KNOWN_GID         (1<<5)
+#define CURLFINFOFLAG_KNOWN_SIZE        (1<<6)
+#define CURLFINFOFLAG_KNOWN_HLINKCOUNT  (1<<7)
+
+/* Content of this structure depends on information which is known and is
+   achievable (e.g. by FTP LIST parsing). Please see the url_easy_setopt(3) man
+   page for callbacks returning this structure -- some fields are mandatory,
+   some others are optional. The FLAG field has special meaning. */
+struct curl_fileinfo {
+  char *filename;
+  curlfiletype filetype;
+  time_t time;
+  unsigned int perm;
+  int uid;
+  int gid;
+  curl_off_t size;
+  long int hardlinks;
+
+  struct {
+    /* If some of these fields is not NULL, it is a pointer to b_data. */
+    char *time;
+    char *perm;
+    char *user;
+    char *group;
+    char *target; /* pointer to the target filename of a symlink */
+  } strings;
+
+  unsigned int flags;
+
+  /* used internally */
+  char * b_data;
+  size_t b_size;
+  size_t b_used;
+};
+
+/* return codes for CURLOPT_CHUNK_BGN_FUNCTION */
+#define CURL_CHUNK_BGN_FUNC_OK      0
+#define CURL_CHUNK_BGN_FUNC_FAIL    1 /* tell the lib to end the task */
+#define CURL_CHUNK_BGN_FUNC_SKIP    2 /* skip this chunk over */
+
+/* if splitting of data transfer is enabled, this callback is called before
+   download of an individual chunk started. Note that parameter "remains" works
+   only for FTP wildcard downloading (for now), otherwise is not used */
+typedef long (*curl_chunk_bgn_callback)(const void *transfer_info,
+                                        void *ptr,
+                                        int remains);
+
+/* return codes for CURLOPT_CHUNK_END_FUNCTION */
+#define CURL_CHUNK_END_FUNC_OK      0
+#define CURL_CHUNK_END_FUNC_FAIL    1 /* tell the lib to end the task */
+
+/* If splitting of data transfer is enabled this callback is called after
+   download of an individual chunk finished.
+   Note! After this callback was set then it have to be called FOR ALL chunks.
+   Even if downloading of this chunk was skipped in CHUNK_BGN_FUNC.
+   This is the reason why we don't need "transfer_info" parameter in this
+   callback and we are not interested in "remains" parameter too. */
+typedef long (*curl_chunk_end_callback)(void *ptr);
+
+/* return codes for FNMATCHFUNCTION */
+#define CURL_FNMATCHFUNC_MATCH    0 /* string corresponds to the pattern */
+#define CURL_FNMATCHFUNC_NOMATCH  1 /* pattern doesn't match the string */
+#define CURL_FNMATCHFUNC_FAIL     2 /* an error occurred */
+
+/* callback type for wildcard downloading pattern matching. If the
+   string matches the pattern, return CURL_FNMATCHFUNC_MATCH value, etc. */
+typedef int (*curl_fnmatch_callback)(void *ptr,
+                                     const char *pattern,
+                                     const char *string);
+
 /* These are the return codes for the seek callbacks */
 #define CURL_SEEKFUNC_OK       0
 #define CURL_SEEKFUNC_FAIL     1 /* fail the entire transfer */
@@ -409,6 +500,8 @@ typedef enum {
   CURLE_FTP_PRET_FAILED,         /* 84 - a PRET command failed */
   CURLE_RTSP_CSEQ_ERROR,         /* 85 - mismatch of RTSP CSeq numbers */
   CURLE_RTSP_SESSION_ERROR,      /* 86 - mismatch of RTSP Session Identifiers */
+  CURLE_FTP_BAD_FILE_LIST,       /* 87 - unable to parse FTP file list */
+  CURLE_CHUNK_FAILED,            /* 88 - chunk callback reported error */
 
   CURL_LAST /* never use! */
 } CURLcode;
@@ -623,6 +716,12 @@ typedef enum {
 #define CURLPROTO_SMTP   (1<<16)
 #define CURLPROTO_SMTPS  (1<<17)
 #define CURLPROTO_RTSP   (1<<18)
+#define CURLPROTO_RTMP   (1<<19)
+#define CURLPROTO_RTMPT  (1<<20)
+#define CURLPROTO_RTMPE  (1<<21)
+#define CURLPROTO_RTMPTE (1<<22)
+#define CURLPROTO_RTMPS  (1<<23)
+#define CURLPROTO_RTMPTS (1<<24)
 #define CURLPROTO_ALL    (~0) /* enable everything */
 
 /* long may be 32 or 64 bits, but we should never depend on anything else
@@ -1316,6 +1415,26 @@ typedef enum {
   /* Let the application define a custom write method for RTP data */
   CINIT(INTERLEAVEFUNCTION, FUNCTIONPOINT, 196),
 
+  /* Turn on wildcard matching */
+  CINIT(WILDCARDMATCH, LONG, 197),
+
+  /* Directory matching callback called before downloading of an
+     individual file (chunk) started */
+  CINIT(CHUNK_BGN_FUNCTION, FUNCTIONPOINT, 198),
+
+  /* Directory matching callback called after the file (chunk)
+     was downloaded, or skipped */
+  CINIT(CHUNK_END_FUNCTION, FUNCTIONPOINT, 199),
+
+  /* Change match (fnmatch-like) callback for wildcard matching */
+  CINIT(FNMATCH_FUNCTION, FUNCTIONPOINT, 200),
+
+  /* Let the application define custom chunk data pointer */
+  CINIT(CHUNK_DATA, OBJECTPOINT, 201),
+
+  /* FNMATCH_FUNCTION user pointer */
+  CINIT(FNMATCH_DATA, OBJECTPOINT, 202),
+
   CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
@@ -1764,9 +1883,12 @@ typedef enum {
   CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG   + 37,
   CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG   + 38,
   CURLINFO_RTSP_CSEQ_RECV   = CURLINFO_LONG   + 39,
+  CURLINFO_PRIMARY_PORT     = CURLINFO_LONG   + 40,
+  CURLINFO_LOCAL_IP         = CURLINFO_STRING + 41,
+  CURLINFO_LOCAL_PORT       = CURLINFO_LONG   + 42,
   /* Fill in new entries below here! */
 
-  CURLINFO_LASTONE          = 39
+  CURLINFO_LASTONE          = 42
 } CURLINFO;
 
 /* CURLINFO_RESPONSE_CODE is the new name for the option previously known as

include/curl/curlver.h

@@ -30,12 +30,12 @@
 
 /* This is the version number of the libcurl package from which this header
    file origins: */
-#define LIBCURL_VERSION "7.20.1-DEV"
+#define LIBCURL_VERSION "7.21.1-DEV"
 
 /* The numeric version number is also available "in parts" by using these
    defines: */
 #define LIBCURL_VERSION_MAJOR 7
-#define LIBCURL_VERSION_MINOR 20
+#define LIBCURL_VERSION_MINOR 21
 #define LIBCURL_VERSION_PATCH 1
 
 /* This is the numeric version of the libcurl version number, meant for easier
@@ -53,7 +53,7 @@
    and it is always a greater number in a more recent release. It makes
    comparisons with greater than and less than work.
 */
-#define LIBCURL_VERSION_NUM 0x071401
+#define LIBCURL_VERSION_NUM 0x071501
 
 /*
  * This is the date and time when the full source package was created. The

include/curl/typecheck-gcc.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -230,6 +230,12 @@ _CURL_WARNING(_curl_easy_getinfo_err_curl_slist,
    (option) == CURLOPT_SSH_PRIVATE_KEYFILE ||                                 \
    (option) == CURLOPT_CRLFILE ||                                             \
    (option) == CURLOPT_ISSUERCERT ||                                          \
+   (option) == CURLOPT_SOCKS5_GSSAPI_SERVICE ||                               \
+   (option) == CURLOPT_SSH_KNOWNHOSTS ||                                      \
+   (option) == CURLOPT_MAIL_FROM ||                                           \
+   (option) == CURLOPT_RTSP_SESSION_ID ||                                     \
+   (option) == CURLOPT_RTSP_STREAM_URI ||                                     \
+   (option) == CURLOPT_RTSP_TRANSPORT ||                                      \
    0)
 
 /* evaluates to true if option takes a curl_write_callback argument */
@@ -256,6 +262,10 @@ _CURL_WARNING(_curl_easy_getinfo_err_curl_slist,
    (option) == CURLOPT_SSL_CTX_DATA ||                                        \
    (option) == CURLOPT_SEEKDATA ||                                            \
    (option) == CURLOPT_PRIVATE ||                                             \
+   (option) == CURLOPT_SSH_KEYDATA ||                                         \
+   (option) == CURLOPT_INTERLEAVEDATA ||                                      \
+   (option) == CURLOPT_CHUNK_DATA ||                                          \
+   (option) == CURLOPT_FNMATCH_DATA ||                                        \
    0)
 
 /* evaluates to true if option takes a POST data argument (void* or char*) */
@@ -272,6 +282,7 @@ _CURL_WARNING(_curl_easy_getinfo_err_curl_slist,
    (option) == CURLOPT_POSTQUOTE ||                                           \
    (option) == CURLOPT_PREQUOTE ||                                            \
    (option) == CURLOPT_TELNETOPTIONS ||                                       \
+   (option) == CURLOPT_MAIL_RCPT ||                                           \
    0)
 
 /* groups of curl_easy_getinfo infos that take the same type of argument */

lib/.gitignore

@@ -4,3 +4,8 @@ stamp-h1
 *.orig
 *.rej
 TAGS
+Makefile.vc8.dist
+Makefile.vc9.dist
+libcurl.plist.dist
+libcurl.vcproj
+vc6libcurl.dsp

lib/Makefile.Watcom

@@ -3,56 +3,107 @@
 #  G. Vanem <gvanem@broadpark.no>
 #
 
-TARGETS = libcurl_wc.dll libcurl_wc_imp.lib libcurl_wc.lib
+!ifndef %watcom
+!error WATCOM environment variable not set!
+!else
+SYS_INCL = -I$(%watcom)\h\nt -I$(%watcom)\h
+SYS_LIBS = $(%watcom)\lib386\nt;$(%watcom)\lib386
+!endif
+
+!ifdef %libname
+LIBNAME = $(%libname)
+!else
+LIBNAME = libcurl
+!endif
+TARGETS = $(LIBNAME).dll $(LIBNAME)_imp.lib $(LIBNAME).lib
 
 CC = wcc386
+LD = wlink
+AR = wlib
+RC = wrc
 
-CFLAGS = -3s -mf -d3 -hc -zff -zgf -zq -zm -zc -s -fr=con -w2 -fpi -oilrtfm -bt=nt &
-         -bd -d+ -dWIN32 -dCURL_CA_BUNDLE=getenv("CURL_CA_BUNDLE")                 &
-         -dBUILDING_LIBCURL -dHAVE_SPNEGO=1 -dENABLE_IPV6                          &
-         -dDEBUG=1 -dDEBUGBUILD -d_WIN32_WINNT=0x0501 -dWINBERAPI=__declspec(cdecl) &
-         -dWINLDAPAPI=__declspec(cdecl) -I. -I..\include
+!ifdef __LOADDLL__
+!  loaddll wcc386  wccd386
+!  loaddll wpp386  wppd386
+!  loaddll wlib    wlibd
+!  if $(__VERSION__) > 1270
+!    loaddll wlink   wlinkd
+!  else
+!    loaddll wlink   wlink
+!  endif
+!endif
+
+!if $(__VERSION__) < 1250                                                                                                           
+RM = del /q /f >NUL 2>&1
+!else                                                                                                                               
+RM = rm -f                                                                                                                          
+!endif
+MD = mkdir
+RD = rmdir /q /s >NUL 2>&1
+CP = copy
+
+CFLAGS = -3r -mf -hc -zff -zgf -zq -zm -zc -s -fr=con -w2 -fpi -oilrtfm &
+         -wcd=201 -bt=nt -d+ -dWIN32 -dCURL_WANTS_CA_BUNDLE_ENV         &
+         -dBUILDING_LIBCURL -dHAVE_SPNEGO=1 -I. -I..\include $(SYS_INCL)
+
+!ifdef %debug
+DEBUG  = -dDEBUG=1 -dDEBUGBUILD
+CFLAGS += -d3 $(DEBUG)
+!else
+CFLAGS += -d0
+!endif
+
+!ifdef %use_ipv6
+CFLAGS += -d_WIN32_WINNT=0x0501 -dENABLE_IPV6
+!endif
 
 #
 # Change to suite.
 #
-ZLIB_ROOT  = ..\..\..\zlib-1.2.3
-USE_ZLIB   = 0
-USE_ARES   = 0
-USE_WATT32 = 0
+!ifdef %zlib_root
+ZLIB_ROOT = $(%zlib_root)
+!else
+ZLIB_ROOT = ..\..\zlib-1.2.5
+!endif
 
-!ifeq USE_ZLIB 1
+!ifdef %openssl_root
+OPENSSL_ROOT = $(%openssl_root)
+!else
+OPENSSL_ROOT = ..\..\openssl-0.9.8o
+!endif
+
+!ifdef %ares_root
+ARES_ROOT = $(%ares_root)
+!else
+ARES_ROOT = ..\ares
+!endif
+
+!ifdef %use_zlib
 CFLAGS += -dHAVE_ZLIB_H -dHAVE_LIBZ -I$(ZLIB_ROOT)
 !endif
 
-!ifeq USE_ARES 1
-CFLAGS += -dUSE_ARES -I..\ares
+!ifdef %use_ssl
+CFLAGS += -wcd=138 -dUSE_OPENSSL -dUSE_SSLEAY -I$(OPENSSL_ROOT)\inc32
 !endif
 
-!ifeq USE_WATT32 1
+!ifdef %use_ares
+CFLAGS += -dUSE_ARES -I$(ARES_ROOT)
+!endif
+
+!ifdef %use_watt32
 CFLAGS += -dUSE_WATT32 -I$(%watt_root)\inc
 !endif
 
 OBJ_BASE = WC_Win32.obj
-C_ARG    = $(OBJ_BASE)\wcc386.arg
 LINK_ARG = $(OBJ_BASE)\dyn\wlink.arg
 LIB_ARG  = $(OBJ_BASE)\stat\wlib.arg
 
-# Unfortunately, we can't include Makefile.inc here because wmake doesn't
-# use backslash as the line continuation character by default
-CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	&
-  cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c	&
-  ldap.c ssluse.c version.c getenv.c escape.c mprintf.c telnet.c	&
-  netrc.c getinfo.c transfer.c strequal.c easy.c security.c krb4.c	&
-  krb5.c memdebug.c http_chunks.c strtok.c connect.c llist.c hash.c	&
-  multi.c content_encoding.c share.c http_digest.c md5.c curl_rand.c	&
-  http_negotiate.c http_ntlm.c inet_pton.c strtoofft.c strerror.c	&
-  hostares.c hostasyn.c hostip4.c hostip6.c hostsyn.c hostthre.c	&
-  inet_ntop.c parsedate.c select.c gtls.c sslgen.c tftp.c splay.c	&
-  strdup.c socks.c ssh.c nss.c qssl.c rawstr.c curl_addrinfo.c          &
-  socks_gssapi.c socks_sspi.c curl_sspi.c slist.c nonblock.c		&
-  curl_memrchr.c imap.c pop3.c smtp.c pingpong.c rtsp.c curl_threads.c	&
-  warnless.c
+# In order to process Makefile.inc wmake must be called with -u switch!
+!ifndef %MAKEFLAGS
+!error You MUST call wmake with the -u switch!
+!else
+!include Makefile.inc
+!endif
 
 OBJS = $(CSOURCES:.c=.obj)
 OBJS = $OBJ_DIR\$(OBJS: = $OBJ_DIR\)
@@ -60,506 +111,82 @@ OBJS = $OBJ_DIR\$(OBJS: = $OBJ_DIR\)
 #
 # Use $(OBJS) as a template to generate $(OBJS_STAT) and $(OBJS_DYN).
 #
-OBJ_DIR   = $(OBJ_BASE)\stat
-OBJS_STAT = $+ $(OBJS) $-
+OBJ_DIR    = $(OBJ_BASE)\stat
+OBJS_STAT  = $+ $(OBJS) $-
 
-OBJ_DIR  = $(OBJ_BASE)\dyn
-OBJS_DYN = $+ $(OBJS) $-
+OBJ_DIR    = $(OBJ_BASE)\dyn
+OBJS_DYN   = $+ $(OBJS) $-
 
-RESOURCE = $(OBJ_BASE)\dyn\libcurl.res
+CURLBUILDH = ..\include\curl\curlbuild.h
+RESOURCE   = $(OBJ_BASE)\dyn\libcurl.res
 
-all: $(OBJ_BASE) $(C_ARG) $(TARGETS) .SYMBOLIC
+all: $(CURLBUILDH) $(OBJ_BASE) $(TARGETS) .SYMBOLIC
 	@echo Welcome to libcurl
 
-$(OBJ_BASE):
-	- mkdir $(OBJ_BASE)
-	- mkdir $(OBJ_BASE)\stat
-	- mkdir $(OBJ_BASE)\dyn
-
-libcurl_wc.dll libcurl_wc_imp.lib: $(OBJS_DYN) $(RESOURCE) $(LINK_ARG)
-	wlink name libcurl_wc.dll @$(LINK_ARG)
-
-libcurl_wc.lib: $(OBJS_STAT) $(LIB_ARG)
-	wlib -q -b- c $@ @$(LIB_ARG)
-
 clean: .SYMBOLIC
-	- rm -f $(OBJS_STAT) $(OBJS_DYN) $(RESOURCE) $(C_ARG) $(LINK_ARG) $(LIB_ARG)
+	-$(RM) $(OBJS_STAT)
+	-$(RM) $(OBJS_DYN)
+	-$(RM) $(RESOURCE) $(LINK_ARG) $(LIB_ARG)
 
 vclean realclean: clean .SYMBOLIC
-	- rm -f $(TARGETS) libcurl_wc.map
-	- rmdir $(OBJ_BASE)\stat
-	- rmdir $(OBJ_BASE)\dyn
-	- rmdir $(OBJ_BASE)
+	-$(RM) $(TARGETS) $(LIBNAME).map $(LIBNAME).sym
+	-$(RD) $(OBJ_BASE)\stat
+	-$(RD) $(OBJ_BASE)\dyn
+	-$(RD) $(OBJ_BASE)
+
+$(OBJ_BASE):
+	-$(MD) $^@
+	-$(MD) $^@\stat
+	-$(MD) $^@\dyn
+
+$(CURLBUILDH): .EXISTSONLY
+	$(CP) $^@.dist $^@
+
+$(LIBNAME).dll: $(OBJS_DYN) $(RESOURCE) $(LINK_ARG)
+	$(LD) name $^@ @$]@
+
+$(LIBNAME).lib: $(OBJS_STAT) $(LIB_ARG)
+	$(AR) -q -b -c $^@ @$]@
 
 .ERASE
 $(RESOURCE): libcurl.rc
-        wrc -dDEBUGBUILD=1 -q -r -zm -I..\include -fo=$@ libcurl.rc
+	$(RC) $(DEBUG) -q -r -zm -I..\include $(SYS_INCL) $[@ -fo=$^@
 
 .ERASE
 .c{$(OBJ_BASE)\dyn}.obj:
-	$(CC) $[@ @$(C_ARG) -fo=$@
+	$(CC) $(CFLAGS) -bd -br $[@ -fo=$^@
 
 .ERASE
 .c{$(OBJ_BASE)\stat}.obj:
-	$(CC) $[@ @$(C_ARG) -DCURL_STATICLIB -fo=$@
-
-$(C_ARG): $(__MAKEFILES__)
-	%create $^@
-	%append $^@ $(CFLAGS)
+	$(CC) $(CFLAGS) -DCURL_STATICLIB $[@ -fo=$^@
 
 $(LINK_ARG): $(__MAKEFILES__)
 	%create $^@
 	@%append $^@ system nt dll
 	@%append $^@ file { $(OBJS_DYN) }
-	@%append $^@ option quiet, map, caseexact, eliminate, implib=libcurl_wc_imp.lib,
-	@%append $^@ res=$(RESOURCE) libpath $(%watcom)\lib386;$(%watcom)\lib386\nt
-	@%append $^@ library clib3s.lib, wldap32.lib
-!ifeq USE_WATT32 1
+!ifdef %debug
+	@%append $^@ debug all
+	@%append $^@ option symfile
+!endif
+	@%append $^@ option quiet, map, caseexact, eliminate, implib=$(LIBNAME)_imp.lib,
+	@%append $^@ res=$(RESOURCE) libpath $(SYS_LIBS)
+	@%append $^@ library wldap32.lib
+!ifdef %use_watt32
 	@%append $^@ library $(%watt_root)\lib\wattcpw_imp.lib
 !else
 	@%append $^@ library ws2_32.lib
 !endif
-!ifeq USE_ZLIB 1
+!ifdef %use_zlib
 	@%append $^@ library $(ZLIB_ROOT)\zlib.lib
 !endif
-!ifeq USE_ARES 1
-	@%append $^@ library ..\ares\cares.lib
+!ifdef %use_ssl
+	@%append $^@ library $(OPENSSL_ROOT)\out32\libeay32.lib, $(OPENSSL_ROOT)\out32\ssleay32.lib
+!endif
+!ifdef %use_ares
+	@%append $^@ library $(ARES_ROOT)\cares.lib
 !endif
 
 $(LIB_ARG): $(__MAKEFILES__)
 	%create $^@
-	for %f in ($(OBJS_STAT)) do @%append $^@ +- %f
+	@for %f in ($(OBJS_STAT)) do @%append $^@ +- %f
 
-#
-# Dependencies based on "gcc -MM .."
-#
-$(OBJ_DIR)\file.obj: file.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strtoofft.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  progress.h sendf.h escape.h file.h speedcheck.h getinfo.h transfer.h &
-  url.h curl_memory.h parsedate.h ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\timeval.obj: timeval.c timeval.h setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\base64.obj: base64.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\mprintf.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h urldata.h cookie.h ..\include\curl\curl.h &
-  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h easyif.h curl_base64.h curl_memory.h memdebug.h
-$(OBJ_DIR)\hostip.obj: hostip.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h inet_ntop.h ..\include\curl\mprintf.h curl_memory.h &
-  memdebug.h
-$(OBJ_DIR)\progress.obj: progress.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  progress.h ..\include\curl\mprintf.h
-$(OBJ_DIR)\formdata.obj: formdata.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h easyif.h strequal.h curl_memory.h &
-  curl_rand.h ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\cookie.obj: cookie.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\mprintf.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h urldata.h cookie.h ..\include\curl\curl.h &
-  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h strequal.h strtok.h sendf.h curl_memory.h share.h &
-  strtoofft.h rawstr.h memdebug.h curl_memrchr.h
-$(OBJ_DIR)\http.obj: http.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  transfer.h sendf.h easyif.h progress.h curl_base64.h strequal.h &
-  sslgen.h http_digest.h http_ntlm.h http_negotiate.h url.h share.h &
-  http.h curl_memory.h select.h parsedate.h strtoofft.h multiif.h rawstr.h &
-  ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\sendf.obj: sendf.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h sendf.h connect.h sslgen.h ssh.h &
-  multiif.h ..\include\curl\mprintf.h curl_memory.h strerror.h easyif.h &
-  memdebug.h
-$(OBJ_DIR)\ftp.obj: ftp.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h sendf.h easyif.h if2ip.h progress.h &
-  transfer.h escape.h http.h socks.h ftp.h strtoofft.h strequal.h &
-  sslgen.h connect.h strerror.h inet_ntop.h inet_pton.h select.h &
-  parsedate.h sockaddr.h multiif.h url.h ..\include\curl\mprintf.h &
-  curl_memory.h memdebug.h
-$(OBJ_DIR)\url.obj: url.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h netrc.h &
-  sslgen.h transfer.h sendf.h progress.h strequal.h strerror.h escape.h &
-  strtok.h share.h content_encoding.h http_digest.h http_negotiate.h &
-  select.h multiif.h easyif.h speedcheck.h rawstr.h ftp.h dict.h telnet.h &
-  tftp.h http.h file.h curl_ldap.h ssh.h url.h connect.h inet_ntop.h &
-  http_ntlm.h socks.h ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\dict.obj: dict.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  transfer.h sendf.h progress.h strequal.h dict.h rawstr.h &
-  ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\if2ip.obj: if2ip.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h inet_ntop.h strequal.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h if2ip.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\speedcheck.obj: speedcheck.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
-  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h sendf.h multiif.h speedcheck.h
-$(OBJ_DIR)\ldap.obj: ldap.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\ssluse.obj: ssluse.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  url.h inet_pton.h ssluse.h connect.h strequal.h select.h sslgen.h &
-  rawstr.h ..\include\curl\mprintf.h
-$(OBJ_DIR)\version.obj: version.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h sslgen.h ..\include\curl\mprintf.h
-$(OBJ_DIR)\getenv.obj: getenv.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  curl_memory.h memdebug.h
-$(OBJ_DIR)\escape.obj: escape.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  curl_memory.h urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h &
-  hash.h llist.h curl_addrinfo.h splay.h easyif.h &
-  ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\mprintf.obj: mprintf.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\mprintf.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h curl_memory.h ..\include\curl\curl.h memdebug.h
-$(OBJ_DIR)\telnet.obj: telnet.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  transfer.h sendf.h telnet.h connect.h ..\include\curl\mprintf.h &
-  arpa_telnet.h curl_memory.h select.h strequal.h rawstr.h memdebug.h
-$(OBJ_DIR)\netrc.obj: netrc.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  netrc.h strequal.h strtok.h curl_memory.h rawstr.h ..\include\curl\mprintf.h &
-  memdebug.h
-$(OBJ_DIR)\getinfo.obj: getinfo.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h getinfo.h curl_memory.h sslgen.h connect.h &
-  memdebug.h
-$(OBJ_DIR)\transfer.obj: transfer.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strtoofft.h strequal.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h rawstr.h urldata.h &
-  cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h netrc.h content_encoding.h transfer.h sendf.h &
-  speedcheck.h progress.h http.h url.h getinfo.h sslgen.h http_digest.h &
-  http_ntlm.h http_negotiate.h share.h curl_memory.h select.h multiif.h &
-  easyif.h ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\strequal.obj: strequal.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strequal.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h
-$(OBJ_DIR)\easy.obj: easy.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strequal.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
-  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h transfer.h sslgen.h url.h getinfo.h share.h &
-  strdup.h curl_memory.h progress.h easyif.h select.h sendf.h http_ntlm.h &
-  curl_rand.h connect.h ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\security.obj: security.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\krb4.obj: krb4.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\krb5.obj: krb5.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\memdebug.obj: memdebug.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  ..\include\curl\mprintf.h urldata.h cookie.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h curl_memory.h &
-  memdebug.h
-$(OBJ_DIR)\http_chunks.obj: http_chunks.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  urldata.h cookie.h ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  content_encoding.h http.h curl_memory.h easyif.h ..\include\curl\mprintf.h &
-  memdebug.h
-$(OBJ_DIR)\strtok.obj: strtok.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strtok.h
-$(OBJ_DIR)\connect.obj: connect.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\mprintf.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h urldata.h cookie.h ..\include\curl\curl.h &
-  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
-  curl_addrinfo.h splay.h sendf.h if2ip.h strerror.h connect.h curl_memory.h &
-  select.h url.h multiif.h sockaddr.h inet_ntop.h sslgen.h memdebug.h
-$(OBJ_DIR)\llist.obj: llist.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h llist.h curl_memory.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h memdebug.h
-$(OBJ_DIR)\hash.obj: hash.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h hash.h llist.h &
-  ..\include\curl\mprintf.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h curl_memory.h &
-  ..\include\curl\curl.h memdebug.h
-$(OBJ_DIR)\multi.obj: multi.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h transfer.h url.h connect.h progress.h &
-  easyif.h multiif.h sendf.h http.h ..\include\curl\mprintf.h curl_memory.h &
-  memdebug.h
-$(OBJ_DIR)\content_encoding.obj: content_encoding.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\share.obj: share.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h share.h curl_memory.h memdebug.h
-$(OBJ_DIR)\http_digest.obj: http_digest.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  urldata.h cookie.h ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  rawstr.h curl_base64.h curl_md5.h http_digest.h strtok.h url.h curl_memory.h &
-  easyif.h ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\md5.obj: md5.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h curl_md5.h
-$(OBJ_DIR)\http_negotiate.obj: http_negotiate.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\http_ntlm.obj: http_ntlm.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  urldata.h cookie.h ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h easyif.h &
-  sendf.h rawstr.h curl_base64.h http_ntlm.h url.h curl_memory.h ssluse.h &
-  ..\include\curl\mprintf.h memdebug.h
-$(OBJ_DIR)\inet_pton.obj: inet_pton.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  inet_pton.h
-$(OBJ_DIR)\strtoofft.obj: strtoofft.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  strtoofft.h
-$(OBJ_DIR)\strerror.obj: strerror.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  strerror.h urldata.h cookie.h formdata.h timeval.h http_chunks.h &
-  hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  ..\include\curl\mprintf.h
-$(OBJ_DIR)\hostares.obj: hostares.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h multiif.h inet_pton.h connect.h select.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\hostasyn.obj: hostasyn.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\hostip4.obj: hostip4.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h inet_pton.h ..\include\curl\mprintf.h curl_memory.h &
-  memdebug.h
-$(OBJ_DIR)\hostip6.obj: hostip6.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h inet_pton.h connect.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\hostsyn.obj: hostsyn.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\hostthre.obj: hostthre.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  share.h strerror.h url.h multiif.h inet_pton.h &
-  ..\include\curl\mprintf.h inet_ntop.h curl_memory.h memdebug.h
-$(OBJ_DIR)\inet_ntop.obj: inet_ntop.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\mprintf.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h inet_ntop.h
-$(OBJ_DIR)\parsedate.obj: parsedate.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h rawstr.h parsedate.h
-$(OBJ_DIR)\select.obj: select.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
-  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
-  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
-  urldata.h cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h &
-  llist.h curl_addrinfo.h splay.h connect.h select.h
-$(OBJ_DIR)\gtls.obj: gtls.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\sslgen.obj: sslgen.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sslgen.h &
-  ssluse.h gtls.h nssg.h qssl.h sendf.h rawstr.h url.h curl_memory.h &
-  progress.h memdebug.h
-$(OBJ_DIR)\tftp.obj: tftp.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h &
-  transfer.h sendf.h tftp.h progress.h connect.h strerror.h sockaddr.h &
-  url.h ..\include\curl\mprintf.h curl_memory.h select.h memdebug.h
-$(OBJ_DIR)\splay.obj: splay.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h splay.h
-$(OBJ_DIR)\strdup.obj: strdup.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h strdup.h
-$(OBJ_DIR)\socks.obj: socks.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  strequal.h select.h connect.h socks.h memdebug.h
-$(OBJ_DIR)\ssh.obj: ssh.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\nss.obj: nss.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h urldata.h cookie.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
-  http_chunks.h hostip.h hash.h llist.h curl_addrinfo.h splay.h sendf.h &
-  url.h connect.h strequal.h select.h sslgen.h ..\include\curl\mprintf.h
-$(OBJ_DIR)\qssl.obj: qssl.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h
-$(OBJ_DIR)\nonblock.obj: nonblock.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h nonblock.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h
-$(OBJ_DIR)\rawstr.obj: rawstr.c setup.h config-win32.h ..\include\curl\curlbuild.h &
-  ..\include\curl\curlrules.h setup_once.h rawstr.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h
-$(OBJ_DIR)\curl_addrinfo.obj: curl_addrinfo.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h curl_addrinfo.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\curl_rand.obj: curl_rand.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h curl_rand.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\curl_memrchr.obj: curl_memrchr.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h curl_memrchr.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\imap.obj: imap.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h imap.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\pop3.obj: pop3.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h pop3.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\smtp.obj: smtp.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h smtp.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h
-$(OBJ_DIR)\pingpong.obj: pingpong.c setup.h config-win32.h &
-  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
-  ..\include\curl\curl.h ..\include\curl\curlver.h &
-  ..\include\curl\curlrules.h ..\include\curl\easy.h &
-  ..\include\curl\multi.h ..\include\curl\curl.h pingpong.h &
-  ..\include\curl\mprintf.h curl_memory.h memdebug.h

lib/Makefile.am

@@ -44,6 +44,9 @@ CLEANFILES = $(DSP) $(VCPROJ)
 lib_LTLIBRARIES = libcurl.la
 LIBCURL_LIBS = @LIBCURL_LIBS@
 
+# This might hold -Werror
+CFLAGS += @CURL_CFLAG_EXTRAS@
+
 # Specify our include paths here, and do it relative to $(top_srcdir) and
 # $(top_builddir), to ensure that these paths which belong to the library
 # being currently built and tested are searched before the library which

lib/Makefile.inc

@@ -1,28 +1,38 @@
 # ./lib/Makefile.inc
+# Using the backslash as line continuation character might be problematic
+# with some make flavours, as Watcom's wmake showed us already. If we
+# ever want to change this in a portable manner then we should consider
+# this idea (posted to the libcurl list by Adam Kellas):
+# CSRC1 = file1.c file2.c file3.c
+# CSRC2 = file4.c file5.c file6.c
+# CSOURCES = $(CSRC1) $(CSRC2)
 
 CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	\
   cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c	\
   ldap.c ssluse.c version.c getenv.c escape.c mprintf.c telnet.c	\
   netrc.c getinfo.c transfer.c strequal.c easy.c security.c krb4.c	\
-  krb5.c memdebug.c http_chunks.c strtok.c connect.c llist.c hash.c	\
-  multi.c content_encoding.c share.c http_digest.c md5.c curl_rand.c	\
+  curl_fnmatch.c fileinfo.c ftplistparser.c wildcard.c krb5.c		\
+  memdebug.c http_chunks.c strtok.c connect.c llist.c hash.c multi.c	\
+  content_encoding.c share.c http_digest.c md4.c md5.c curl_rand.c	\
   http_negotiate.c http_ntlm.c inet_pton.c strtoofft.c strerror.c	\
   hostares.c hostasyn.c hostip4.c hostip6.c hostsyn.c hostthre.c	\
   inet_ntop.c parsedate.c select.c gtls.c sslgen.c tftp.c splay.c	\
-  strdup.c socks.c ssh.c nss.c qssl.c rawstr.c curl_addrinfo.c          \
+  strdup.c socks.c ssh.c nss.c qssl.c rawstr.c curl_addrinfo.c		\
   socks_gssapi.c socks_sspi.c curl_sspi.c slist.c nonblock.c		\
   curl_memrchr.c imap.c pop3.c smtp.c pingpong.c rtsp.c curl_threads.c	\
-  warnless.c
+  warnless.c hmac.c polarssl.c curl_rtmp.c openldap.c curl_gethostname.c
 
 HHEADERS = arpa_telnet.h netrc.h file.h timeval.h qssl.h hostip.h	\
   progress.h formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h	\
   if2ip.h speedcheck.h urldata.h curl_ldap.h ssluse.h escape.h telnet.h	\
   getinfo.h strequal.h krb4.h memdebug.h http_chunks.h curl_rand.h	\
-  strtok.h connect.h llist.h hash.h content_encoding.h share.h		\
+  curl_fnmatch.h wildcard.h fileinfo.h ftplistparser.h strtok.h		\
+  connect.h llist.h hash.h content_encoding.h share.h curl_md4.h	\
   curl_md5.h http_digest.h http_negotiate.h http_ntlm.h inet_pton.h	\
   strtoofft.h strerror.h inet_ntop.h curlx.h curl_memory.h setup.h	\
   transfer.h select.h easyif.h multiif.h parsedate.h sslgen.h gtls.h	\
   tftp.h sockaddr.h splay.h strdup.h setup_once.h socks.h ssh.h nssg.h	\
   curl_base64.h rawstr.h curl_addrinfo.h curl_sspi.h slist.h nonblock.h	\
   curl_memrchr.h imap.h pop3.h smtp.h pingpong.h rtsp.h curl_threads.h	\
-  warnless.h
+  warnless.h curl_hmac.h polarssl.h curl_rtmp.h curl_gethostname.h
+

lib/Makefile.m32

@@ -1,13 +1,13 @@
 #########################################################################
 #
 ## Makefile for building libcurl.a with MingW32 (GCC-3.2 or later)
-## and optionally OpenSSL (0.9.8), libssh2 (1.1), zlib (1.2.3)
+## and optionally OpenSSL (0.9.8), libssh2 (1.2), zlib (1.2.5)
 ##
 ## Usage:
 ## mingw32-make -f Makefile.m32 [SSL=1] [SSH2=1] [ZLIB=1] [IDN=1] [SSPI=1] [IPV6=1] [LDAPS=1] [DYN=1]
 ##
 ## Hint: you can also set environment vars to control the build, f.e.:
-## set ZLIB_PATH=c:/zlib-1.2.3
+## set ZLIB_PATH=c:/zlib-1.2.5
 ## set ZLIB=1
 ##
 ## Comments to: Troy Engel <tengel@sonic.net> or
@@ -16,15 +16,15 @@
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../zlib-1.2.4
+ZLIB_PATH = ../../zlib-1.2.5
 endif
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.8n
+OPENSSL_PATH = ../../openssl-0.9.8o
 endif
 # Edit the path below to point to the base of your LibSSH2 package.
 ifndef LIBSSH2_PATH
-LIBSSH2_PATH = ../../libssh2-1.2.4
+LIBSSH2_PATH = ../../libssh2-1.2.6
 endif
 # Edit the path below to point to the base of your libidn package.
 ifndef LIBIDN_PATH

lib/Makefile.netware

@@ -14,17 +14,17 @@ endif
 
 # Edit the path below to point to the base of your Zlib sources.
 ifndef ZLIB_PATH
-ZLIB_PATH = ../../zlib-1.2.4
+ZLIB_PATH = ../../zlib-1.2.5
 endif
 
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.8n
+OPENSSL_PATH = ../../openssl-0.9.8o
 endif
 
 # Edit the path below to point to the base of your LibSSH2 package.
 ifndef LIBSSH2_PATH
-LIBSSH2_PATH = ../../libssh2-1.2.4
+LIBSSH2_PATH = ../../libssh2-1.2.6
 endif
 
 # Edit the path below to point to the base of your libidn package.
@@ -616,6 +616,9 @@ $(CURL_INC)/curl/curlbuild.h: Makefile.netware FORCE
 	@echo $(DL)** Do not edit this file - it is created by make!$(DL) >> $@
 	@echo $(DL)** All your changes will be lost!!$(DL) >> $@
 	@echo $(DL)*/$(DL) >> $@
+	@echo $(DL)#ifndef NETWARE$(DL) >> $@
+	@echo $(DL)#error This $(notdir $@) is created for NetWare platform!$(DL) >> $@
+	@echo $(DL)#endif$(DL) >> $@
 	@echo $(DL)#ifndef __CURL_CURLBUILD_H$(DL) >> $@
 	@echo $(DL)#define __CURL_CURLBUILD_H$(DL) >> $@
 ifeq ($(LIBARCH),LIBC)

lib/Makefile.riscos

@@ -1,6 +1,4 @@
 # Makefile for project libcurl
-# Generated on Sun,13 Jan 2002.16:57:00 by EasyGCC (0.1.3 [beta 2] (3 Jan 2002))
-# Contact: easygcc@melotech.co.uk
 
 # Project objects:
 objs =	o.base64 o.connect o.cookie o.dict \
@@ -9,13 +7,15 @@ objs =	o.base64 o.connect o.cookie o.dict \
 	o.getinfo o.getpass o.hostip \
 	o.hostip4 o.hostsyn o.http \
 	o.http_chunks o.inet_ntop o.inet_pton o.if2ip o.krb4 o.ldap \
+	o.curl_fnmatch o.fileinfo o.ftplistparser o.wildcard \
 	o.memdebug o.mprintf o.netrc o.parsedate o.progress \
 	o.security o.select o.sendf o.speedcheck o.ssluse \
 	o.strequal o.strtok o.telnet o.timeval \
 	o.transfer o.url o.version o.strtoofft o.sslgen o.gtls \
 	o.rawstr o.curl_addrinfo o.slist o.nonblock o.curl_rand \
 	o.curl_memrchr o.imap o.pop3 o.smtp o.pingpong o.rtsp \
-	o.curl_threads o.warnless
+	o.curl_threads o.warnless o.hmac o.md5 o.curl_rtmp \
+	o.openldap o.polarssl o.md4 o.curl_gethostname
 
 
 # Compile options:
@@ -39,12 +39,18 @@ o.cookie:	c.cookie
 o.curl_addrinfo:	c.curl_addrinfo
 		gcc $(compileropts) -c -o curl_addrinfo.o c.curl_addrinfo
 
+o.curl_gethostname:	c.curl_gethostname
+		gcc $(compileropts) -c -o curl_gethostname.o c.curl_gethostname
+
 o.curl_memrchr:	c.curl_memrchr
 		gcc $(compileropts) -c -o curl_memrchr.o c.curl_memrchr
 
 o.curl_rand:	c.curl_rand
 		gcc $(compileropts) -c -o curl_rand.o c.curl_rand
 
+o.curl_rtmp:	c.curl_rtmp
+		gcc $(compileropts) -c -o curl_rtmp.o c.curl_rtmp
+
 o.curl_threads:	c.curl_threads
 		gcc $(compileropts) -c -o curl_threads.o c.curl_threads
 
@@ -78,6 +84,9 @@ o.getinfo:	c.getinfo
 o.getpass:	c.getpass
 		gcc $(compileropts) -c -o getpass.o c.getpass
 
+o.hmac:		c.hmac
+		gcc $(compileropts) -c -o hmac.o c.hmac
+
 o.hostip:	c.hostip
 		gcc $(compileropts) -c -o hostip.o c.hostip
 
@@ -111,6 +120,12 @@ o.krb4:	c.krb4
 o.ldap:	c.ldap
 		gcc $(compileropts) -IOpenLDAP: -c -o ldap.o c.ldap
 
+o.md4:		c.md4
+		gcc $(compileropts) -c -o md4.o c.md4
+
+o.md5:		c.md5
+		gcc $(compileropts) -c -o md5.o c.md5
+
 o.memdebug:	c.memdebug
 		gcc $(compileropts) -c -o memdebug.o c.memdebug
 
@@ -120,12 +135,18 @@ o.mprintf:	c.mprintf
 o.netrc:	c.netrc
 		gcc $(compileropts) -c -o netrc.o c.netrc
 
+o.openldap:	c.openldap
+		gcc $(compileropts) -c -o openldap.o c.openldap
+
 o.parsedate:	c.parsedate
 		gcc $(compileropts) -c -o parsedate.o c.parsedate
 
 o.pingpong:	c.pingpong
 		gcc $(compileropts) -c -o pingpong.o c.pingpong
 
+o.polarssl:	c.polarssl
+		gcc $(compileropts) -c -o polarssl.o c.polarssl
+
 o.pop3:		c.pop3
 		gcc $(compileropts) -c -o pop3.o c.pop3
 
@@ -153,7 +174,7 @@ o.smtp:		c.smtp
 o.speedcheck:	c.speedcheck
 		gcc $(compileropts) -c -o speedcheck.o c.speedcheck
 
-o.gtls:	c.gtls
+o.gtls:		c.gtls
 		gcc $(compileropts) -c -o gtls.o c.gtls
 
 o.sslgen:	c.sslgen
@@ -186,7 +207,7 @@ o.timeval:	c.timeval
 o.transfer:	c.transfer
 		gcc $(compileropts) -c -o transfer.o c.transfer
 
-o.url:	c.url
+o.url:		c.url
 		gcc $(compileropts) -c -o url.o c.url
 
 o.version:	c.version
@@ -194,3 +215,15 @@ o.version:	c.version
 
 o.warnless:	c.warnless
 		gcc $(compileropts) -c -o warnless.o c.warnless
+
+o.curl_fnmatch:	c.curl_fnmatch
+		gcc $(compileropts) -c -o curl_fnmatch.o c.curl_fnmatch
+
+o.fileinfo:	c.fileinfo
+		gcc $(compileropts) -c -o fileinfo.o c.fileinfo
+
+o.ftplistparser:	c.ftplistparser
+		gcc $(compileropts) -c -o ftplistparser.o c.ftplistparser
+
+o.wildcard:	c.wildcard
+		gcc $(compileropts) -c -o wildcard.o c.wildcard

lib/Makefile.vc6

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1999 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1999 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -18,7 +18,6 @@
 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 # KIND, either express or implied.
 #
-# $Id: Makefile.am,v 1.139 2008-11-03 08:50:58 bagder Exp $
 ###########################################################################
 #
 # Makefile for building libcurl with MSVC6
@@ -55,11 +54,11 @@ IMPLIB_NAME       = libcurl_imp
 IMPLIB_NAME_DEBUG = libcurld_imp
 
 !IFNDEF OPENSSL_PATH
-OPENSSL_PATH   = ../../openssl-0.9.8g
+OPENSSL_PATH   = ../../openssl-0.9.8o
 !ENDIF
 
 !IFNDEF ZLIB_PATH
-ZLIB_PATH  = ../../zlib-1.2.3
+ZLIB_PATH  = ../../zlib-1.2.5
 !ENDIF
 
 !IFNDEF MACHINE
@@ -101,7 +100,7 @@ LFLAGS     = /nologo /machine:$(MACHINE)
 SSLLIBS    = libeay32.lib ssleay32.lib
 ZLIBLIBSDLL= zdll.lib
 ZLIBLIBS   = zlib.lib
-WINLIBS    = wsock32.lib wldap32.lib
+WINLIBS    = ws2_32.lib wldap32.lib
 CFLAGS     = $(CFLAGS)
 
 CFGSET     = FALSE
@@ -110,6 +109,10 @@ CFGSET     = FALSE
 CFLAGS = $(CFLAGS) /DUSE_WINDOWS_SSPI /I$(WINDOWS_SDK_PATH)\include
 !ENDIF
 
+!IFDEF USE_IPV6
+CFLAGS = $(CFLAGS) /DUSE_IPV6
+!ENDIF
+
 ##############################################################
 # Runtime library configuration
 
@@ -450,46 +453,55 @@ X_OBJS= \
 	$(DIROBJ)\content_encoding.obj \
 	$(DIROBJ)\cookie.obj \
 	$(DIROBJ)\curl_addrinfo.obj \
+	$(DIROBJ)\curl_fnmatch.obj \
+	$(DIROBJ)\curl_gethostname.obj \
 	$(DIROBJ)\curl_memrchr.obj \
 	$(DIROBJ)\curl_rand.obj \
+	$(DIROBJ)\curl_rtmp.obj \
 	$(DIROBJ)\curl_sspi.obj \
 	$(DIROBJ)\curl_threads.obj \
 	$(DIROBJ)\dict.obj \
 	$(DIROBJ)\easy.obj \
 	$(DIROBJ)\escape.obj \
+	$(DIROBJ)\fileinfo.obj \
 	$(DIROBJ)\file.obj \
 	$(DIROBJ)\formdata.obj \
+	$(DIROBJ)\ftplistparser.obj \
 	$(DIROBJ)\ftp.obj \
 	$(DIROBJ)\getenv.obj \
 	$(DIROBJ)\getinfo.obj \
 	$(DIROBJ)\gtls.obj \
 	$(DIROBJ)\hash.obj \
+	$(DIROBJ)\hmac.obj \
 	$(DIROBJ)\hostares.obj \
 	$(DIROBJ)\hostasyn.obj \
-	$(DIROBJ)\hostip.obj \
 	$(DIROBJ)\hostip4.obj \
 	$(DIROBJ)\hostip6.obj \
+	$(DIROBJ)\hostip.obj \
 	$(DIROBJ)\hostsyn.obj \
 	$(DIROBJ)\hostthre.obj \
-	$(DIROBJ)\http.obj \
 	$(DIROBJ)\http_chunks.obj \
 	$(DIROBJ)\http_digest.obj \
 	$(DIROBJ)\http_negotiate.obj \
 	$(DIROBJ)\http_ntlm.obj \
+	$(DIROBJ)\http.obj \
 	$(DIROBJ)\if2ip.obj \
 	$(DIROBJ)\imap.obj \
 	$(DIROBJ)\inet_ntop.obj \
 	$(DIROBJ)\inet_pton.obj \
 	$(DIROBJ)\ldap.obj \
 	$(DIROBJ)\llist.obj \
+	$(DIROBJ)\md4.obj \
 	$(DIROBJ)\md5.obj \
 	$(DIROBJ)\memdebug.obj \
 	$(DIROBJ)\mprintf.obj \
 	$(DIROBJ)\multi.obj \
 	$(DIROBJ)\netrc.obj \
         $(DIROBJ)\nonblock.obj \
+	$(DIROBJ)\openldap.obj \
 	$(DIROBJ)\parsedate.obj \
 	$(DIROBJ)\pingpong.obj \
+	$(DIROBJ)\polarssl.obj \
 	$(DIROBJ)\pop3.obj \
 	$(DIROBJ)\progress.obj \
 	$(DIROBJ)\rawstr.obj \
@@ -499,8 +511,8 @@ X_OBJS= \
 	$(DIROBJ)\share.obj \
 	$(DIROBJ)\slist.obj \
 	$(DIROBJ)\smtp.obj \
-	$(DIROBJ)\socks.obj \
 	$(DIROBJ)\socks_gssapi.obj \
+	$(DIROBJ)\socks.obj \
 	$(DIROBJ)\socks_sspi.obj \
 	$(DIROBJ)\speedcheck.obj \
 	$(DIROBJ)\splay.obj \
@@ -518,6 +530,7 @@ X_OBJS= \
 	$(DIROBJ)\url.obj \
 	$(DIROBJ)\version.obj \
 	$(DIROBJ)\warnless.obj \
+	$(DIROBJ)\wildcard.obj \
 	$(RESOURCE)
 
 all : $(TARGET)

lib/config-symbian.h

@@ -48,10 +48,7 @@
 /* to enable hidden symbols */
 /*#define CURL_HIDDEN_SYMBOLS 1*/
 
-/* W$ LDAP with non-W$ compiler */
-/* #undef CURL_LDAP_HYBRID */
-
-/* Use W$ LDAP implementation */
+/* Use Windows LDAP implementation */
 /* #undef CURL_LDAP_WIN */
 
 /* when not building a shared library */

lib/config-vxworks.h

@@ -59,10 +59,7 @@
 /* to enable hidden symbols */
 /* #undef CURL_HIDDEN_SYMBOLS */
 
-/* W$ LDAP with non-W$ compiler */
-/* #undef CURL_LDAP_HYBRID */
-
-/* Use W$ LDAP implementation */
+/* Use Windows LDAP implementation */
 /* #undef CURL_LDAP_WIN */
 
 /* when not building a shared library */

lib/config-win32.h

@@ -504,6 +504,10 @@
 #  define USE_WIN32_LARGE_FILES
 #endif
 
+#if defined(__WATCOMC__) && !defined(USE_WIN32_LARGE_FILES)
+#  define USE_WIN32_LARGE_FILES
+#endif
+
 #if defined(__POCC__)
 #  undef USE_WIN32_LARGE_FILES
 #endif
@@ -535,20 +539,24 @@
 /* ---------------------------------------------------------------- */
 
 #if defined(CURL_HAS_NOVELL_LDAPSDK) || defined(CURL_HAS_MOZILLA_LDAPSDK)
-#undef CURL_LDAP_HYBRID
 #undef CURL_LDAP_WIN
 #define HAVE_LDAP_SSL_H 1
 #define HAVE_LDAP_URL_PARSE 1
 #elif defined(CURL_HAS_OPENLDAP_LDAPSDK)
-#undef CURL_LDAP_HYBRID
 #undef CURL_LDAP_WIN
 #define HAVE_LDAP_URL_PARSE 1
 #else
-#undef CURL_LDAP_HYBRID
 #undef HAVE_LDAP_URL_PARSE
 #define CURL_LDAP_WIN 1
 #endif
 
+#if defined(__WATCOMC__) && defined(CURL_LDAP_WIN)
+#if __WATCOMC__ < 1280
+#define WINBERAPI  __declspec(cdecl)
+#define WINLDAPAPI __declspec(cdecl)
+#endif
+#endif
+
 #if defined(__POCC__) && defined(CURL_LDAP_WIN)
 #  define CURL_DISABLE_LDAP 1
 #endif
@@ -572,7 +580,7 @@
 /* Name of package */
 #define PACKAGE "curl"
 
-#if defined(__POCC__)
+#if defined(__POCC__) || (USE_IPV6)
 #  define ENABLE_IPV6 1
 #endif
 

lib/config-win32ce.h

@@ -379,7 +379,6 @@
 /* ---------------------------------------------------------------- */
 
 #define CURL_LDAP_WIN 1
-#undef CURL_LDAP_HYBRID
 #undef HAVE_LDAP_URL_PARSE
 
 /* ---------------------------------------------------------------- */

lib/connect.c

@@ -112,10 +112,11 @@ struct Curl_sockaddr_ex {
 
 static bool verifyconnect(curl_socket_t sockfd, int *error);
 
-static curl_socket_t
+static CURLcode
 singleipconnect(struct connectdata *conn,
                 const Curl_addrinfo *ai, /* start connecting to this */
                 long timeout_ms,
+                curl_socket_t *sock,
                 bool *connected);
 
 /*
@@ -180,16 +181,13 @@ long Curl_timeleft(struct connectdata *conn,
 /*
  * waitconnect() waits for a TCP connect on the given socket for the specified
  * number if milliseconds. It returns:
- * 0    fine connect
- * -1   select() error
- * 1    select() timeout
- * 2    select() returned with an error condition fd_set
  */
 
 #define WAITCONN_CONNECTED     0
 #define WAITCONN_SELECT_ERROR -1
 #define WAITCONN_TIMEOUT       1
 #define WAITCONN_FDSET_ERROR   2
+#define WAITCONN_ABORTED       3
 
 static
 int waitconnect(struct connectdata *conn,
@@ -209,9 +207,8 @@ int waitconnect(struct connectdata *conn,
     /* now select() until we get connect or timeout */
     rc = Curl_socket_ready(CURL_SOCKET_BAD, sockfd, (int)(timeout_msec>1000?
                                                           1000:timeout_msec));
-
     if(Curl_pgrsUpdate(conn))
-      return CURLE_ABORTED_BY_CALLBACK;
+      return WAITCONN_ABORTED;
 
     if(-1 == rc)
       /* error, no connect here, try next */
@@ -492,37 +489,130 @@ static bool verifyconnect(curl_socket_t sockfd, int *error)
 
 /* Used within the multi interface. Try next IP address, return TRUE if no
    more address exists or error */
-static bool trynextip(struct connectdata *conn,
-                      int sockindex,
-                      bool *connected)
+static CURLcode trynextip(struct connectdata *conn,
+                          int sockindex,
+                          bool *connected)
 {
   curl_socket_t sockfd;
   Curl_addrinfo *ai;
 
-  /* first close the failed socket */
-  sclose(conn->sock[sockindex]);
+  /* First clean up after the failed socket.
+     Don't close it yet to ensure that the next IP's socket gets a different
+     file descriptor, which can prevent bugs when the curl_multi_socket_action
+     interface is used with certain select() replacements such as kqueue. */
+  curl_socket_t fd_to_close = conn->sock[sockindex];
   conn->sock[sockindex] = CURL_SOCKET_BAD;
   *connected = FALSE;
 
-  if(sockindex != FIRSTSOCKET)
-    return TRUE; /* no next */
+  if(sockindex != FIRSTSOCKET) {
+    sclose(fd_to_close);
+    return CURLE_COULDNT_CONNECT; /* no next */
+  }
 
   /* try the next address */
   ai = conn->ip_addr->ai_next;
 
   while(ai) {
-    sockfd = singleipconnect(conn, ai, 0L, connected);
+    CURLcode res = singleipconnect(conn, ai, 0L, &sockfd, connected);
+    if(res)
+      return res;
     if(sockfd != CURL_SOCKET_BAD) {
       /* store the new socket descriptor */
       conn->sock[sockindex] = sockfd;
       conn->ip_addr = ai;
-      return FALSE;
+      sclose(fd_to_close);
+      return CURLE_OK;
     }
     ai = ai->ai_next;
   }
+  sclose(fd_to_close);
+  return CURLE_COULDNT_CONNECT;
+}
+
+/* retrieves ip address and port from a sockaddr structure */
+static bool getaddressinfo(struct sockaddr* sa, char* addr,
+                           long* port)
+{
+  unsigned short us_port;
+  struct sockaddr_in* si = NULL;
+#ifdef ENABLE_IPV6
+  struct sockaddr_in6* si6 = NULL;
+#endif
+
+  switch (sa->sa_family) {
+    case AF_INET:
+      si = (struct sockaddr_in*) sa;
+      if(Curl_inet_ntop(sa->sa_family, &si->sin_addr,
+                        addr, MAX_IPADR_LEN) == NULL)
+        return FALSE;
+      us_port = ntohs(si->sin_port);
+      *port = us_port;
+      break;
+#ifdef ENABLE_IPV6
+    case AF_INET6:
+      si6 = (struct sockaddr_in6*)sa;
+      if(Curl_inet_ntop(sa->sa_family, &si6->sin6_addr,
+                        addr, MAX_IPADR_LEN) == NULL)
+        return FALSE;
+      us_port = ntohs(si6->sin6_port);
+      *port = us_port;
+      break;
+#endif
+    default:
+      addr[0] = '\0';
+      *port = 0;
+  }
   return TRUE;
 }
 
+/* retrieves the start/end point information of a socket of an established
+   connection */
+void Curl_updateconninfo(struct connectdata *conn, curl_socket_t sockfd)
+{
+  int error;
+  curl_socklen_t len;
+  struct Curl_sockaddr_storage ssrem;
+  struct Curl_sockaddr_storage ssloc;
+  struct SessionHandle *data = conn->data;
+  struct PureInfo *info = &conn->data->info;
+
+  if(conn->bits.reuse)
+    /* reusing same connection */
+    return;
+
+  len = sizeof(struct Curl_sockaddr_storage);
+  if(getpeername(sockfd, (struct sockaddr*) &ssrem, &len)) {
+    error = SOCKERRNO;
+    failf(data, "getpeername() failed with errno %d: %s",
+          error, Curl_strerror(conn, error));
+    return;
+  }
+
+  len = sizeof(struct Curl_sockaddr_storage);
+  if(getsockname(sockfd, (struct sockaddr*) &ssloc, &len)) {
+    error = SOCKERRNO;
+    failf(data, "getsockname() failed with errno %d: %s",
+          error, Curl_strerror(conn, error));
+    return;
+  }
+
+  if(!getaddressinfo((struct sockaddr*)&ssrem,
+                      info->ip, &info->port)) {
+    error = ERRNO;
+    failf(data, "ssrem inet_ntop() failed with errno %d: %s",
+          error, Curl_strerror(conn, error));
+    return;
+  }
+
+  if(!getaddressinfo((struct sockaddr*)&ssloc,
+                     info->localip, &info->localport)) {
+    error = ERRNO;
+    failf(data, "ssloc inet_ntop() failed with errno %d: %s",
+          error, Curl_strerror(conn, error));
+    return;
+  }
+}
+
 /*
  * Curl_is_connected() is used from the multi interface to check if the
  * firstsocket has connected.
@@ -575,16 +665,19 @@ CURLcode Curl_is_connected(struct connectdata *conn,
       /* we are connected, awesome! */
       conn->bits.tcpconnect = TRUE;
       *connected = TRUE;
+      Curl_pgrsTime(data, TIMER_CONNECT); /* connect done */
+      Curl_verboseconnect(conn);
+      Curl_updateconninfo(conn, sockfd);
+
       return CURLE_OK;
     }
     /* nope, not connected for real */
     data->state.os_errno = error;
     infof(data, "Connection failed\n");
-    if(trynextip(conn, sockindex, connected)) {
+    code = trynextip(conn, sockindex, connected);
+    if(code)
       failf(data, "Failed connect to %s:%ld; %s",
             conn->host.name, conn->port, Curl_strerror(conn, error));
-      code = CURLE_COULDNT_CONNECT;
-    }
   }
   else if(WAITCONN_TIMEOUT != rc) {
     int error = 0;
@@ -598,12 +691,13 @@ CURLcode Curl_is_connected(struct connectdata *conn,
     else
       infof(data, "Connection failed\n");
 
-    if(trynextip(conn, sockindex, connected)) {
+    code = trynextip(conn, sockindex, connected);
+
+    if(code) {
       error = SOCKERRNO;
       data->state.os_errno = error;
       failf(data, "Failed connect to %s:%ld; %s",
             conn->host.name, conn->port, Curl_strerror(conn, error));
-      code = CURLE_COULDNT_CONNECT;
     }
   }
   /*
@@ -691,12 +785,20 @@ void Curl_sndbufset(curl_socket_t sockfd)
 #endif
 
 
-/* singleipconnect() connects to the given IP only, and it may return without
-   having connected if used from the multi interface. */
-static curl_socket_t
+/*
+ * singleipconnect()
+ *
+ * Note that even on connect fail it returns CURLE_OK, but with 'sock' set to
+ * CURL_SOCKET_BAD. Other errors will however return proper errors.
+ *
+ * singleipconnect() connects to the given IP only, and it may return without
+ * having connected if used from the multi interface.
+ */
+static CURLcode
 singleipconnect(struct connectdata *conn,
                 const Curl_addrinfo *ai,
                 long timeout_ms,
+                curl_socket_t *sockp,
                 bool *connected)
 {
   struct Curl_sockaddr_ex addr;
@@ -706,13 +808,15 @@ singleipconnect(struct connectdata *conn,
   bool isconnected;
   struct SessionHandle *data = conn->data;
   curl_socket_t sockfd;
-  CURLcode res;
+  CURLcode res = CURLE_OK;
   const void *iptoprint;
   struct sockaddr_in * const sa4 = (void *)&addr.sa_addr;
 #ifdef ENABLE_IPV6
   struct sockaddr_in6 * const sa6 = (void *)&addr.sa_addr;
 #endif
 
+  *sockp = CURL_SOCKET_BAD;
+
   /*
    * The Curl_sockaddr_ex structure is basically libcurl's external API
    * curl_sockaddr structure with enough space available to directly hold
@@ -751,7 +855,7 @@ singleipconnect(struct connectdata *conn,
 
   if(sockfd == CURL_SOCKET_BAD)
     /* no socket, no connection */
-    return CURL_SOCKET_BAD;
+    return CURLE_OK;
 
 #if defined(ENABLE_IPV6) && defined(HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID)
   if (conn->scope && (addr.family == AF_INET6))
@@ -804,7 +908,7 @@ singleipconnect(struct connectdata *conn,
                                CURLSOCKTYPE_IPCXN);
     if(error) {
       sclose(sockfd); /* close the socket and bail out */
-      return CURL_SOCKET_BAD;
+      return res;
     }
   }
 
@@ -812,7 +916,7 @@ singleipconnect(struct connectdata *conn,
   res = bindlocal(conn, sockfd, addr.family);
   if(res) {
     sclose(sockfd); /* close socket and bail out */
-    return CURL_SOCKET_BAD;
+    return res;
   }
 
   /* set socket non-blocking */
@@ -840,6 +944,10 @@ singleipconnect(struct connectdata *conn,
 #endif
 #endif
       rc = waitconnect(conn, sockfd, timeout_ms);
+      if(WAITCONN_ABORTED == rc) {
+        sclose(sockfd);
+        return CURLE_ABORTED_BY_CALLBACK;
+      }
       break;
     default:
       /* unknown error, fallthrough and try another address! */
@@ -855,7 +963,8 @@ singleipconnect(struct connectdata *conn,
   if((WAITCONN_TIMEOUT == rc) &&
      (data->state.used_interface == Curl_if_multi)) {
     /* Timeout when running the multi interface */
-    return sockfd;
+    *sockp = sockfd;
+    return CURLE_OK;
   }
 
   isconnected = verifyconnect(sockfd, &error);
@@ -864,7 +973,9 @@ singleipconnect(struct connectdata *conn,
     /* we are connected, awesome! */
     *connected = TRUE; /* this is a true connect */
     infof(data, "connected\n");
-    return sockfd;
+    Curl_updateconninfo(conn, sockfd);
+    *sockp = sockfd;
+    return CURLE_OK;
   }
   else if(WAITCONN_TIMEOUT == rc)
     infof(data, "Timeout\n");
@@ -876,7 +987,7 @@ singleipconnect(struct connectdata *conn,
   /* connect failed or timed out */
   sclose(sockfd);
 
-  return CURL_SOCKET_BAD;
+  return CURLE_OK;
 }
 
 /*
@@ -941,7 +1052,11 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
        curr_addr = curr_addr->ai_next, aliasindex++) {
 
     /* start connecting to the IP curr_addr points to */
-    sockfd = singleipconnect(conn, curr_addr, timeout_per_addr, connected);
+    CURLcode res =
+      singleipconnect(conn, curr_addr, timeout_per_addr, &sockfd, connected);
+
+    if(res)
+      return res;
 
     if(sockfd != CURL_SOCKET_BAD)
       break;

lib/connect.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -68,4 +68,6 @@ void Curl_sndbufset(curl_socket_t sockfd);
 #define Curl_sndbufset(y)
 #endif
 
+void Curl_updateconninfo(struct connectdata *conn, curl_socket_t sockfd);
+
 #endif

lib/content_encoding.c

@@ -103,7 +103,7 @@ inflate_stream(struct connectdata *conn,
     status = inflate(z, Z_SYNC_FLUSH);
     if(status == Z_OK || status == Z_STREAM_END) {
       allow_restart = 0;
-      if(DSIZ - z->avail_out) {
+      if((DSIZ - z->avail_out) && (!k->ignorebody)) {
         result = Curl_client_write(conn, CLIENTWRITE_BODY, decomp,
                                    DSIZ - z->avail_out);
         /* if !CURLE_OK, clean up, return */
@@ -247,7 +247,6 @@ static enum {
 
     /* Skip over the NUL */
     --len;
-    ++data;
   }
 
   if(flags & HEAD_CRC) {
@@ -255,7 +254,6 @@ static enum {
       return GZIP_UNDERFLOW;
 
     len -= 2;
-    data += 2;
   }
 
   *headerlen = totallen - len;

lib/curl_addrinfo.c

@@ -151,7 +151,10 @@ Curl_getaddrinfo_ex(const char *nodename,
     ca->ai_next      = NULL;
 
     if((ai->ai_addrlen > 0) && (ai->ai_addr != NULL)) {
-      ca->ai_addrlen  = ai->ai_addrlen;
+      /* typecast below avoid warning on at least win64:
+         conversion from 'size_t' to 'curl_socklen_t', possible loss of data
+      */
+      ca->ai_addrlen  = (curl_socklen_t)ai->ai_addrlen;
       if((ca->ai_addr = malloc(ca->ai_addrlen)) == NULL) {
         error = EAI_MEMORY;
         free(ca);

lib/curl_config.h.cmake

@@ -58,10 +58,7 @@
 /* to enable hidden symbols */
 #cmakedefine CURL_HIDDEN_SYMBOLS ${CURL_HIDDEN_SYMBOLS}
 
-/* W$ LDAP with non-W$ compiler */
-#cmakedefine CURL_LDAP_HYBRID ${CURL_LDAP_HYBRID}
-
-/* Use W$ LDAP implementation */
+/* Use Windows LDAP implementation */
 #cmakedefine CURL_LDAP_WIN ${CURL_LDAP_WIN}
 
 /* when not building a shared library */
@@ -889,6 +886,9 @@
 /* if GnuTLS is enabled */
 #cmakedefine USE_GNUTLS ${USE_GNUTLS}
 
+/* if PolarSSL is enabled */
+#cmakedefine USE_POLARSSL ${USE_POLARSSL}
+
 /* if libSSH2 is in use */
 #cmakedefine USE_LIBSSH2 ${USE_LIBSSH2}
 

lib/curl_fnmatch.c

@@ -0,0 +1,424 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include "setup.h"
+
+#include "curl_fnmatch.h"
+
+#define _MPRINTF_REPLACE /* use our functions only */
+#include <curl/mprintf.h>
+
+#include "curl_memory.h"
+/* The last #include file should be: */
+#include "memdebug.h"
+
+#define CURLFNM_CHARSET_LEN (sizeof(char) * 256)
+#define CURLFNM_CHSET_SIZE (CURLFNM_CHARSET_LEN + 15)
+
+#define CURLFNM_NEGATE  CURLFNM_CHARSET_LEN
+
+#define CURLFNM_ALNUM   (CURLFNM_CHARSET_LEN + 1)
+#define CURLFNM_DIGIT   (CURLFNM_CHARSET_LEN + 2)
+#define CURLFNM_XDIGIT  (CURLFNM_CHARSET_LEN + 3)
+#define CURLFNM_ALPHA   (CURLFNM_CHARSET_LEN + 4)
+#define CURLFNM_PRINT   (CURLFNM_CHARSET_LEN + 5)
+#define CURLFNM_BLANK   (CURLFNM_CHARSET_LEN + 6)
+#define CURLFNM_LOWER   (CURLFNM_CHARSET_LEN + 7)
+#define CURLFNM_GRAPH   (CURLFNM_CHARSET_LEN + 8)
+#define CURLFNM_SPACE   (CURLFNM_CHARSET_LEN + 9)
+#define CURLFNM_UPPER   (CURLFNM_CHARSET_LEN + 10)
+
+typedef enum {
+  CURLFNM_LOOP_DEFAULT = 0,
+  CURLFNM_LOOP_BACKSLASH
+} loop_state;
+
+typedef enum {
+  CURLFNM_SCHS_DEFAULT = 0,
+  CURLFNM_SCHS_MAYRANGE,
+  CURLFNM_SCHS_MAYRANGE2,
+  CURLFNM_SCHS_RIGHTBR,
+  CURLFNM_SCHS_RIGHTBRLEFTBR
+} setcharset_state;
+
+typedef enum {
+  CURLFNM_PKW_INIT = 0,
+  CURLFNM_PKW_DDOT
+} parsekey_state;
+
+#define SETCHARSET_OK     1
+#define SETCHARSET_FAIL   0
+
+static int parsekeyword(unsigned char **pattern, unsigned char *charset)
+{
+  parsekey_state state = CURLFNM_PKW_INIT;
+#define KEYLEN 10
+  char keyword[KEYLEN] = { 0 };
+  int found = FALSE;
+  int i;
+  unsigned char *p = *pattern;
+  for(i = 0; !found; i++) {
+    char c = *p++;
+    if(i >= KEYLEN)
+      return SETCHARSET_FAIL;
+    switch(state) {
+    case CURLFNM_PKW_INIT:
+      if(ISALPHA(c) && ISLOWER(c))
+        keyword[i] = c;
+      else if(c == ':')
+        state = CURLFNM_PKW_DDOT;
+      else
+        return 0;
+      break;
+    case CURLFNM_PKW_DDOT:
+      if(c == ']')
+        found = TRUE;
+      else
+        return SETCHARSET_FAIL;
+    }
+  }
+#undef KEYLEN
+
+  *pattern = p; /* move caller's pattern pointer */
+  if(strcmp(keyword, "digit") == 0)
+    charset[CURLFNM_DIGIT] = 1;
+  else if(strcmp(keyword, "alnum") == 0)
+    charset[CURLFNM_ALNUM] = 1;
+  else if(strcmp(keyword, "alpha") == 0)
+    charset[CURLFNM_ALPHA] = 1;
+  else if(strcmp(keyword, "xdigit") == 0)
+    charset[CURLFNM_XDIGIT] = 1;
+  else if(strcmp(keyword, "print") == 0)
+    charset[CURLFNM_PRINT] = 1;
+  else if(strcmp(keyword, "graph") == 0)
+    charset[CURLFNM_GRAPH] = 1;
+  else if(strcmp(keyword, "space") == 0)
+    charset[CURLFNM_SPACE] = 1;
+  else if(strcmp(keyword, "blank") == 0)
+    charset[CURLFNM_BLANK] = 1;
+  else if(strcmp(keyword, "upper") == 0)
+    charset[CURLFNM_UPPER] = 1;
+  else if(strcmp(keyword, "lower") == 0)
+    charset[CURLFNM_LOWER] = 1;
+  else
+    return SETCHARSET_FAIL;
+  return SETCHARSET_OK;
+}
+
+/* returns 1 (true) if pattern is OK, 0 if is bad ("p" is pattern pointer) */
+static int setcharset(unsigned char **p, unsigned char *charset)
+{
+  setcharset_state state = CURLFNM_SCHS_DEFAULT;
+  unsigned char rangestart = 0;
+  unsigned char lastchar   = 0;
+  bool something_found = FALSE;
+  unsigned char c;
+  for(;;) {
+    c = **p;
+    switch(state) {
+    case CURLFNM_SCHS_DEFAULT:
+      if(ISALNUM(c)) { /* ASCII value */
+        rangestart = c;
+        charset[c] = 1;
+        (*p)++;
+        state = CURLFNM_SCHS_MAYRANGE;
+        something_found = TRUE;
+      }
+      else if(c == ']') {
+        if(something_found)
+          return SETCHARSET_OK;
+        else
+          something_found = TRUE;
+        state = CURLFNM_SCHS_RIGHTBR;
+        charset[c] = 1;
+        (*p)++;
+      }
+      else if(c == '[') {
+        char c2 = *((*p)+1);
+        if(c2 == ':') { /* there has to be a keyword */
+          (*p) += 2;
+          if(parsekeyword(p, charset)) {
+            state = CURLFNM_SCHS_DEFAULT;
+          }
+          else
+            return SETCHARSET_FAIL;
+        }
+        else {
+          charset[c] = 1;
+          (*p)++;
+        }
+        something_found = TRUE;
+      }
+      else if(c == '?' || c == '*') {
+        something_found = TRUE;
+        charset[c] = 1;
+        (*p)++;
+      }
+      else if(c == '^' || c == '!') {
+        if(!something_found) {
+          if(charset[CURLFNM_NEGATE]) {
+            charset[c] = 1;
+            something_found = TRUE;
+          }
+          else
+            charset[CURLFNM_NEGATE] = 1; /* negate charset */
+        }
+        else
+          charset[c] = 1;
+        (*p)++;
+      }
+      else if(c == '\\') {
+        c = *(++(*p));
+        if(ISPRINT((c))) {
+          something_found = TRUE;
+          state = CURLFNM_SCHS_MAYRANGE;
+          charset[c] = 1;
+          rangestart = c;
+          (*p)++;
+        }
+        else
+          return SETCHARSET_FAIL;
+      }
+      else if(c == '\0') {
+        return SETCHARSET_FAIL;
+      }
+      else {
+        charset[c] = 1;
+        (*p)++;
+        something_found = TRUE;
+      }
+      break;
+    case CURLFNM_SCHS_MAYRANGE:
+      if(c == '-') {
+        charset[c] = 1;
+        (*p)++;
+        lastchar = '-';
+        state = CURLFNM_SCHS_MAYRANGE2;
+      }
+      else if(c == '[') {
+        state = CURLFNM_SCHS_DEFAULT;
+      }
+      else if(ISALNUM(c)) {
+        charset[c] = 1;
+        (*p)++;
+      }
+      else if(c == '\\') {
+        c = *(++(*p));
+        if(ISPRINT(c)) {
+          charset[c] = 1;
+          (*p)++;
+        }
+        else
+          return SETCHARSET_FAIL;
+      }
+      else if(c == ']') {
+        return SETCHARSET_OK;
+      }
+      else
+        return SETCHARSET_FAIL;
+      break;
+    case CURLFNM_SCHS_MAYRANGE2:
+      if(c == '\\') {
+        c = *(++(*p));
+        if(!ISPRINT(c))
+          return SETCHARSET_FAIL;
+      }
+      if(c == ']') {
+        return SETCHARSET_OK;
+      }
+      else if(c == '\\') {
+        c = *(++(*p));
+        if(ISPRINT(c)) {
+          charset[c] = 1;
+          state = CURLFNM_SCHS_DEFAULT;
+          (*p)++;
+        }
+        else
+          return SETCHARSET_FAIL;
+      }
+      if(c >= rangestart) {
+        if((ISLOWER(c) && ISLOWER(rangestart)) ||
+           (ISDIGIT(c) && ISDIGIT(rangestart)) ||
+           (ISUPPER(c) && ISUPPER(rangestart))) {
+          charset[lastchar] = 0;
+          rangestart++;
+          while(rangestart++ <= c)
+            charset[rangestart-1] = 1;
+          (*p)++;
+          state = CURLFNM_SCHS_DEFAULT;
+        }
+        else
+          return SETCHARSET_FAIL;
+      }
+      break;
+    case CURLFNM_SCHS_RIGHTBR:
+      if(c == '[') {
+        state = CURLFNM_SCHS_RIGHTBRLEFTBR;
+        charset[c] = 1;
+        (*p)++;
+      }
+      else if(c == ']') {
+        return SETCHARSET_OK;
+      }
+      else if(c == '\0') {
+        return SETCHARSET_FAIL;
+      }
+      else if(ISPRINT(c)) {
+        charset[c] = 1;
+        (*p)++;
+        state = CURLFNM_SCHS_DEFAULT;
+      }
+      else
+        /* used 'goto fail' instead of 'return SETCHARSET_FAIL' to avoid a
+         * nonsense warning 'statement not reached' at end of the fnc when
+         * compiling on Solaris */
+        goto fail;
+      break;
+    case CURLFNM_SCHS_RIGHTBRLEFTBR:
+      if(c == ']') {
+        return SETCHARSET_OK;
+      }
+      else {
+        state  = CURLFNM_SCHS_DEFAULT;
+        charset[c] = 1;
+        (*p)++;
+      }
+      break;
+    }
+  }
+fail:
+  return SETCHARSET_FAIL;
+}
+
+static int loop(const unsigned char *pattern, const unsigned char *string)
+{
+  loop_state state = CURLFNM_LOOP_DEFAULT;
+  unsigned char *p = (unsigned char *)pattern;
+  unsigned char *s = (unsigned char *)string;
+  unsigned char charset[CURLFNM_CHSET_SIZE] = { 0 };
+  int rc = 0;
+
+  for (;;) {
+    switch(state) {
+    case CURLFNM_LOOP_DEFAULT:
+      if(*p == '*') {
+        while(*(p+1) == '*') /* eliminate multiple stars */
+          p++;
+        if(*s == '\0' && *(p+1) == '\0')
+          return CURL_FNMATCH_MATCH;
+        rc = loop(p + 1, s); /* *.txt matches .txt <=> .txt matches .txt */
+        if(rc == CURL_FNMATCH_MATCH)
+          return CURL_FNMATCH_MATCH;
+        if(*s) /* let the star eat up one character */
+          s++;
+        else
+          return CURL_FNMATCH_NOMATCH;
+      }
+      else if(*p == '?') {
+        if(ISPRINT(*s)) {
+          s++;
+          p++;
+        }
+        else if(*s == '\0')
+          return CURL_FNMATCH_NOMATCH;
+        else
+          return CURL_FNMATCH_FAIL; /* cannot deal with other character */
+      }
+      else if(*p == '\0') {
+        if(*s == '\0')
+          return CURL_FNMATCH_MATCH;
+        else
+          return CURL_FNMATCH_NOMATCH;
+      }
+      else if(*p == '\\') {
+        state = CURLFNM_LOOP_BACKSLASH;
+        p++;
+      }
+      else if(*p == '[') {
+        unsigned char *pp = p+1; /* cannot handle with pointer to register */
+        if(setcharset(&pp, charset)) {
+          int found = FALSE;
+          if(charset[(unsigned int)*s])
+            found = TRUE;
+          else if(charset[CURLFNM_ALNUM])
+            found = ISALNUM(*s);
+          else if(charset[CURLFNM_ALPHA])
+            found = ISALPHA(*s);
+          else if(charset[CURLFNM_DIGIT])
+            found = ISDIGIT(*s);
+          else if(charset[CURLFNM_XDIGIT])
+            found = ISXDIGIT(*s);
+          else if(charset[CURLFNM_PRINT])
+            found = ISPRINT(*s);
+          else if(charset[CURLFNM_SPACE])
+            found = ISSPACE(*s);
+          else if(charset[CURLFNM_UPPER])
+            found = ISUPPER(*s);
+          else if(charset[CURLFNM_LOWER])
+            found = ISLOWER(*s);
+          else if(charset[CURLFNM_BLANK])
+            found = ISBLANK(*s);
+          else if(charset[CURLFNM_GRAPH])
+            found = ISGRAPH(*s);
+
+          if(charset[CURLFNM_NEGATE])
+            found = !found;
+
+          if(found) {
+            p = pp+1;
+            s++;
+            memset(charset, 0, CURLFNM_CHSET_SIZE);
+          }
+          else
+            return CURL_FNMATCH_NOMATCH;
+        }
+        else
+          return CURL_FNMATCH_FAIL;
+      }
+      else {
+        if(*p++ != *s++)
+          return CURL_FNMATCH_NOMATCH;
+      }
+      break;
+    case CURLFNM_LOOP_BACKSLASH:
+      if(ISPRINT(*p)) {
+        if(*p++ == *s++)
+          state = CURLFNM_LOOP_DEFAULT;
+        else
+          return CURL_FNMATCH_NOMATCH;
+      }
+      else
+        return CURL_FNMATCH_FAIL;
+      break;
+    }
+  }
+}
+
+int Curl_fnmatch(void *ptr, const char *pattern, const char *string)
+{
+  (void)ptr; /* the argument is specified by the curl_fnmatch_callback
+                prototype, but not used by Curl_fnmatch() */
+  if(!pattern || !string) {
+    return CURL_FNMATCH_FAIL;
+  }
+  return loop((unsigned char *)pattern, (unsigned char *)string);
+}

lib/curl_fnmatch.h

@@ -0,0 +1,44 @@
+#ifndef HEADER_CURL_FNMATCH_H
+#define HEADER_CURL_FNMATCH_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#define CURL_FNMATCH_MATCH    0
+#define CURL_FNMATCH_NOMATCH  1
+#define CURL_FNMATCH_FAIL     2
+
+/* default pattern matching function
+ * =================================
+ * Implemented with recursive backtracking, if you want to use Curl_fnmatch,
+ * please note that there is not implemented UTF/UNICODE support.
+ *
+ * Implemented features:
+ * '?' notation, does not match UTF characters
+ * '*' can also work with UTF string
+ * [a-zA-Z0-9] enumeration support
+ *
+ * keywords: alnum, digit, xdigit, alpha, print, blank, lower, graph, space
+ *           and upper (use as "[[:alnum:]]")
+ */
+int Curl_fnmatch(void *ptr, const char *pattern, const char *string);
+
+#endif /* HEADER_CURL_FNMATCH_H */

lib/curl_gethostname.c

@@ -0,0 +1,81 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include "setup.h"
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include "curl_gethostname.h"
+
+/*
+ * Curl_gethostname() is a wrapper around gethostname() which allows
+ * overriding the host name that the function would normally return.
+ * This capability is used by the test suite to verify exact matching
+ * of NTLM authentication, which exercises libcurl's MD4 and DES code.
+ *
+ * For libcurl debug enabled builds host name overriding takes place
+ * when environment variable CURL_GETHOSTNAME is set, using the value
+ * held by the variable to override returned host name.
+ *
+ * For libcurl shared library release builds the test suite preloads
+ * another shared library named libhostname using the LD_PRELOAD
+ * mechanism which intercepts, and might override, the gethostname()
+ * function call. In this case a given platform must support the
+ * LD_PRELOAD mechanism and additionally have environment variable
+ * CURL_GETHOSTNAME set in order to override the returned host name.
+ *
+ * For libcurl static library release builds no overriding takes place.
+ */
+
+int Curl_gethostname(char *name, GETHOSTNAME_TYPE_ARG2 namelen) {
+
+#ifndef HAVE_GETHOSTNAME
+
+  /* Allow compilation and return failure when unavailable */
+  (void) name;
+  (void) namelen;
+  return -1;
+
+#else
+
+#ifdef DEBUGBUILD
+
+  /* Override host name when environment variable CURL_GETHOSTNAME is set */
+  const char *force_hostname = getenv("CURL_GETHOSTNAME");
+  if(force_hostname) {
+    strncpy(name, force_hostname, namelen);
+    name[namelen-1] = '\0';
+    return 0;
+  }
+
+#endif /* DEBUGBUILD */
+
+  /* The call to system's gethostname() might get intercepted by the
+     libhostname library when libcurl is built as a non-debug shared
+     library when running the test suite. */
+  return gethostname(name, namelen);
+
+#endif
+
+}

lib/curl_gethostname.h

@@ -0,0 +1,27 @@
+#ifndef HEADER_CURL_GETHOSTNAME_H
+#define HEADER_CURL_GETHOSTNAME_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+int Curl_gethostname(char *name, GETHOSTNAME_TYPE_ARG2 namelen);
+
+#endif /* HEADER_CURL_GETHOSTNAME_H */

lib/curl_hmac.h

@@ -0,0 +1,67 @@
+#ifndef HEADER_CURL_HMAC_H
+#define HEADER_CURL_HMAC_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#ifndef CURL_DISABLE_CRYPTO_AUTH
+
+typedef void    (* HMAC_hinit_func)(void * context);
+typedef void    (* HMAC_hupdate_func)(void * context,
+                                      const unsigned char * data,
+                                      unsigned int len);
+typedef void    (* HMAC_hfinal_func)(unsigned char * result, void * context);
+
+
+/* Per-hash function HMAC parameters. */
+
+typedef struct {
+  HMAC_hinit_func       hmac_hinit;     /* Initialize context procedure. */
+  HMAC_hupdate_func     hmac_hupdate;   /* Update context with data. */
+  HMAC_hfinal_func      hmac_hfinal;    /* Get final result procedure. */
+  unsigned int          hmac_ctxtsize;  /* Context structure size. */
+  unsigned int          hmac_maxkeylen; /* Maximum key length (bytes). */
+  unsigned int          hmac_resultlen; /* Result length (bytes). */
+} HMAC_params;
+
+
+/* HMAC computation context. */
+
+typedef struct {
+  const HMAC_params *   hmac_hash;      /* Hash function definition. */
+  void *                hmac_hashctxt1; /* Hash function context 1. */
+  void *                hmac_hashctxt2; /* Hash function context 2. */
+} HMAC_context;
+
+
+/* Prototypes. */
+
+HMAC_context * Curl_HMAC_init(const HMAC_params * hashparams,
+                              const unsigned char * key,
+                              unsigned int keylen);
+int Curl_HMAC_update(HMAC_context * context,
+                     const unsigned char * data,
+                     unsigned int len);
+int Curl_HMAC_final(HMAC_context * context, unsigned char * result);
+
+#endif
+
+#endif /* HEADER_CURL_HMAC_H */

lib/curl_ldap.h

@@ -8,7 +8,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2007, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -25,7 +25,8 @@
 #ifndef CURL_DISABLE_LDAP
 extern const struct Curl_handler Curl_handler_ldap;
 
-#ifdef HAVE_LDAP_SSL
+#if (defined(USE_OPENLDAP) && defined(USE_SSL)) || \
+   (!defined(USE_OPENLDAP) && defined(HAVE_LDAP_SSL))
 extern const struct Curl_handler Curl_handler_ldaps;
 #endif
 

lib/curl_md4.h

@@ -0,0 +1,33 @@
+#ifndef HEADER_CURL_MD4_H
+#define HEADER_CURL_MD4_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include "setup.h"
+
+/* NSS crypto library does not provide the MD4 hash algorithm, so that we have
+ * a local implementation of it */
+#ifdef USE_NSS
+void Curl_md4it(unsigned char *output, const unsigned char *input, size_t len);
+#endif /* USE_NSS */
+
+#endif /* HEADER_CURL_MD4_H */

lib/curl_md5.h

@@ -22,7 +22,13 @@
  *
  ***************************************************************************/
 
+#ifndef CURL_DISABLE_CRYPTO_AUTH
+#include "curl_hmac.h"
+
+extern const HMAC_params Curl_HMAC_MD5[1];
+
 void Curl_md5it(unsigned char *output,
                 const unsigned char *input);
+#endif
 
 #endif /* HEADER_CURL_MD5_H */

lib/curl_rtmp.c

@@ -0,0 +1,284 @@
+/***************************************************************************
+ *                      _   _ ____  _
+ *  Project         ___| | | |  _ \| |
+ *                 / __| | | | |_) | |
+ *                | (__| |_| |  _ <| |___
+ *                 \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2010, Howard Chu, <hyc@highlandsun.com>
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include "setup.h"
+
+#ifdef USE_LIBRTMP
+
+#include "urldata.h"
+#include "nonblock.h" /* for curlx_nonblock */
+#include "progress.h" /* for Curl_pgrsSetUploadSize */
+#include "transfer.h"
+#include <curl/curl.h>
+#include <librtmp/rtmp.h>
+
+#define _MPRINTF_REPLACE /* use our functions only */
+#include <curl/mprintf.h>
+
+#include "curl_memory.h"
+/* The last #include file should be: */
+#include "memdebug.h"
+
+#ifdef _WIN32
+#define setsockopt(a,b,c,d,e) (setsockopt)(a,b,c,(const char *)d,(int)e)
+#define SET_RCVTIMEO(tv,s)   int tv = s*1000
+#else
+#define SET_RCVTIMEO(tv,s)   struct timeval tv = {s,0}
+#endif
+
+#define DEF_BUFTIME    (2*60*60*1000)    /* 2 hours */
+
+static CURLcode rtmp_setup(struct connectdata *conn);
+static CURLcode rtmp_do(struct connectdata *conn, bool *done);
+static CURLcode rtmp_done(struct connectdata *conn, CURLcode, bool premature);
+static CURLcode rtmp_connect(struct connectdata *conn, bool *done);
+static CURLcode rtmp_disconnect(struct connectdata *conn);
+
+static Curl_recv rtmp_recv;
+static Curl_send rtmp_send;
+
+/*
+ * RTMP protocol handler.h, based on http://rtmpdump.mplayerhq.hu
+ */
+
+const struct Curl_handler Curl_handler_rtmp = {
+  "RTMP",                               /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMP,                            /* defport */
+  PROT_RTMP                             /* protocol */
+};
+
+const struct Curl_handler Curl_handler_rtmpt = {
+  "RTMPT",                              /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMPT,                           /* defport */
+  PROT_RTMPT                            /* protocol */
+};
+
+const struct Curl_handler Curl_handler_rtmpe = {
+  "RTMPE",                              /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMP,                            /* defport */
+  PROT_RTMPE                            /* protocol */
+};
+
+const struct Curl_handler Curl_handler_rtmpte = {
+  "RTMPTE",                             /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMPT,                           /* defport */
+  PROT_RTMPTE                           /* protocol */
+};
+
+const struct Curl_handler Curl_handler_rtmps = {
+  "RTMPS",                              /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMPS,                           /* defport */
+  PROT_RTMPS                            /* protocol */
+};
+const struct Curl_handler Curl_handler_rtmpts = {
+  "RTMPTS",                             /* scheme */
+  rtmp_setup,                           /* setup_connection */
+  rtmp_do,                              /* do_it */
+  rtmp_done,                            /* done */
+  ZERO_NULL,                            /* do_more */
+  rtmp_connect,                         /* connect_it */
+  ZERO_NULL,                            /* connecting */
+  ZERO_NULL,                            /* doing */
+  ZERO_NULL,                            /* proto_getsock */
+  ZERO_NULL,                            /* doing_getsock */
+  ZERO_NULL,                            /* perform_getsock */
+  rtmp_disconnect,                      /* disconnect */
+  PORT_RTMPS,                           /* defport */
+  PROT_RTMPTS                           /* protocol */
+};
+
+static CURLcode rtmp_setup(struct connectdata *conn)
+{
+  RTMP *r = RTMP_Alloc();
+
+  if (!r)
+    return CURLE_OUT_OF_MEMORY;
+
+  RTMP_Init(r);
+  RTMP_SetBufferMS(r, DEF_BUFTIME);
+  if (!RTMP_SetupURL(r, conn->data->change.url)) {
+    RTMP_Free(r);
+    return CURLE_URL_MALFORMAT;
+  }
+  conn->proto.generic = r;
+  return CURLE_OK;
+}
+
+static CURLcode rtmp_connect(struct connectdata *conn, bool *done)
+{
+  RTMP *r = conn->proto.generic;
+  SET_RCVTIMEO(tv,10);
+
+  r->m_sb.sb_socket = conn->sock[FIRSTSOCKET];
+
+  /* We have to know if it's a write before we send the
+   * connect request packet
+   */
+  if (conn->data->set.upload)
+    r->Link.protocol |= RTMP_FEATURE_WRITE;
+
+  /* For plain streams, use the buffer toggle trick to keep data flowing */
+  if (!(r->Link.lFlags & RTMP_LF_LIVE) && !(r->Link.protocol & RTMP_FEATURE_HTTP))
+    r->Link.lFlags |= RTMP_LF_BUFX;
+
+  curlx_nonblock(r->m_sb.sb_socket, FALSE);
+  setsockopt(r->m_sb.sb_socket, SOL_SOCKET, SO_RCVTIMEO, (char *)&tv, sizeof(tv));
+
+  if (!RTMP_Connect1(r, NULL))
+    return CURLE_FAILED_INIT;
+
+  /* Clients must send a periodic BytesReceived report to the server */
+  r->m_bSendCounter = true;
+
+  *done = TRUE;
+  conn->recv[FIRSTSOCKET] = rtmp_recv;
+  conn->send[FIRSTSOCKET] = rtmp_send;
+  return CURLE_OK;
+}
+
+static CURLcode rtmp_do(struct connectdata *conn, bool *done)
+{
+  RTMP *r = conn->proto.generic;
+
+  if (!RTMP_ConnectStream(r, 0))
+    return CURLE_FAILED_INIT;
+
+  if (conn->data->set.upload) {
+    Curl_pgrsSetUploadSize(conn->data, conn->data->set.infilesize);
+    Curl_setup_transfer(conn, -1, -1, FALSE, NULL, FIRSTSOCKET, NULL);
+  } else
+    Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, NULL, -1, NULL);
+  *done = TRUE;
+  return CURLE_OK;
+}
+
+static CURLcode rtmp_done(struct connectdata *conn, CURLcode status,
+                          bool premature)
+{
+  (void)conn; /* unused */
+  (void)status; /* unused */
+  (void)premature; /* unused */
+
+  return CURLE_OK;
+}
+
+static CURLcode rtmp_disconnect(struct connectdata *conn)
+{
+  RTMP *r = conn->proto.generic;
+  if (r) {
+    conn->proto.generic = NULL;
+    RTMP_Close(r);
+    RTMP_Free(r);
+  }
+  return CURLE_OK;
+}
+
+static ssize_t rtmp_recv(struct connectdata *conn, int sockindex, char *buf,
+                         size_t len, CURLcode *err)
+{
+  RTMP *r = conn->proto.generic;
+  ssize_t nread;
+
+  (void)sockindex; /* unused */
+
+  nread = RTMP_Read(r, buf, len);
+  if (nread < 0) {
+    if (r->m_read.status == RTMP_READ_COMPLETE ||
+        r->m_read.status == RTMP_READ_EOF) {
+      conn->data->req.size = conn->data->req.bytecount;
+      nread = 0;
+    } else
+      *err = CURLE_RECV_ERROR;
+  }
+  return nread;
+}
+
+static ssize_t rtmp_send(struct connectdata *conn, int sockindex,
+                         const void *buf, size_t len, CURLcode *err)
+{
+  RTMP *r = conn->proto.generic;
+  ssize_t num;
+
+  (void)sockindex; /* unused */
+
+  num = RTMP_Write(r, (char *)buf, len);
+  if (num < 0) {
+    *err = CURLE_SEND_ERROR;
+  }
+  return num;
+}
+#endif  /* USE_LIBRTMP */

lib/curl_rtmp.h

@@ -0,0 +1,33 @@
+#ifndef HEADER_CURL_RTMP_H
+#define HEADER_CURL_RTMP_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2010, Howard Chu, <hyc@highlandsun.com>
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+#ifdef USE_LIBRTMP
+extern const struct Curl_handler Curl_handler_rtmp;
+extern const struct Curl_handler Curl_handler_rtmpt;
+extern const struct Curl_handler Curl_handler_rtmpe;
+extern const struct Curl_handler Curl_handler_rtmpte;
+extern const struct Curl_handler Curl_handler_rtmps;
+extern const struct Curl_handler Curl_handler_rtmpts;
+#endif
+
+#endif /* HEADER_CURL_RTMP_H */

lib/dict.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -217,13 +217,12 @@ static CURLcode dict_do(struct connectdata *conn, bool *done)
 
     free(eword);
 
-    if(result)
+    if(result) {
       failf(data, "Failed sending DICT request");
-    else
-      result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, bytecount,
-                                   -1, NULL); /* no upload */
-    if(result)
       return result;
+    }
+    Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, bytecount,
+                        -1, NULL); /* no upload */
   }
   else if(Curl_raw_nequal(path, DICT_DEFINE, sizeof(DICT_DEFINE)-1) ||
            Curl_raw_nequal(path, DICT_DEFINE2, sizeof(DICT_DEFINE2)-1) ||
@@ -265,15 +264,12 @@ static CURLcode dict_do(struct connectdata *conn, bool *done)
 
     free(eword);
 
-    if(result)
+    if(result) {
       failf(data, "Failed sending DICT request");
-    else
-      result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, bytecount,
-                                   -1, NULL); /* no upload */
-
-    if(result)
       return result;
-
+    }
+    Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, bytecount,
+                        -1, NULL); /* no upload */
   }
   else {
 
@@ -290,13 +286,12 @@ static CURLcode dict_do(struct connectdata *conn, bool *done)
                           "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\r\n"
                           "%s\r\n"
                           "QUIT\r\n", ppath);
-      if(result)
+      if(result) {
         failf(data, "Failed sending DICT request");
-      else
-        result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, bytecount,
-                                     -1, NULL);
-      if(result)
         return result;
+      }
+
+      Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, bytecount, -1, NULL);
     }
   }
 

lib/easy.c

@@ -287,6 +287,13 @@ CURLcode curl_global_init(long flags)
   }
 #endif
 
+#if defined(USE_LIBSSH2) && defined(HAVE_LIBSSH2_INIT)
+  if(libssh2_init(0)) {
+    DEBUGF(fprintf(stderr, "Error: libssh2_init failed\n"));
+    return CURLE_FAILED_INIT;
+  }
+#endif
+
   init_flags  = flags;
 
   /* Preset pseudo-random number sequence. */
@@ -355,6 +362,10 @@ void curl_global_cleanup(void)
   amiga_cleanup();
 #endif
 
+#if defined(USE_LIBSSH2) && defined(HAVE_LIBSSH2_EXIT)
+  (void)libssh2_exit();
+#endif
+
   init_flags  = 0;
 }
 
@@ -1097,7 +1108,6 @@ CURLcode curl_easy_recv(CURL *curl, void *buffer, size_t buflen, size_t *n)
 {
   curl_socket_t sfd;
   CURLcode ret;
-  int ret1;
   ssize_t n1;
   struct connectdata *c;
   struct SessionHandle *data = (struct SessionHandle *)curl;
@@ -1107,13 +1117,10 @@ CURLcode curl_easy_recv(CURL *curl, void *buffer, size_t buflen, size_t *n)
     return ret;
 
   *n = 0;
-  ret1 = Curl_read(c, sfd, buffer, buflen, &n1);
+  ret = Curl_read(c, sfd, buffer, buflen, &n1);
 
-  if(ret1 == -1)
-    return CURLE_AGAIN;
-
-  if(ret1 != CURLE_OK)
-    return (CURLcode)ret1;
+  if(ret != CURLE_OK)
+    return ret;
 
   *n = (size_t)n1;
 

lib/file.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -146,7 +146,7 @@ static CURLcode file_range(struct connectdata *conn)
 
   if(data->state.use_range && data->state.range) {
     from=curlx_strtoofft(data->state.range, &ptr, 0);
-    while(ptr && *ptr && (isspace((int)*ptr) || (*ptr=='-')))
+    while(*ptr && (isspace((int)*ptr) || (*ptr=='-')))
       ptr++;
     to=curlx_strtoofft(ptr, &ptr2, 0);
     if(ptr == ptr2) {
@@ -161,11 +161,10 @@ static CURLcode file_range(struct connectdata *conn)
     }
     else if(from < 0) {
       /* -Y */
-      totalsize = -from;
       data->req.maxdownload = -from;
       data->state.resume_from = from;
       DEBUGF(infof(data, "RANGE the last %" FORMAT_OFF_T " bytes\n",
-                   totalsize));
+                   -from));
     }
     else {
       /* X-Y */

lib/fileinfo.c

@@ -0,0 +1,75 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include "setup.h"
+
+#include <stdlib.h>
+#include "strdup.h"
+#include "fileinfo.h"
+
+#define _MPRINTF_REPLACE /* use our functions only */
+#include <curl/mprintf.h>
+
+#include "curl_memory.h"
+/* The last #include file should be: */
+#include "memdebug.h"
+
+struct curl_fileinfo *Curl_fileinfo_alloc(void)
+{
+  struct curl_fileinfo *tmp = malloc(sizeof(struct curl_fileinfo));
+  if(!tmp)
+    return NULL;
+  memset(tmp, 0, sizeof(struct curl_fileinfo));
+  return tmp;
+}
+
+void Curl_fileinfo_dtor(void *user, void *element)
+{
+  struct curl_fileinfo *finfo = element;
+  (void) user;
+  if(!finfo)
+    return;
+
+  if(finfo->b_data){
+    free(finfo->b_data);
+  }
+
+  free(finfo);
+}
+
+struct curl_fileinfo *Curl_fileinfo_dup(const struct curl_fileinfo *src)
+{
+  struct curl_fileinfo *ptr = malloc(sizeof(struct curl_fileinfo));
+  if(!ptr)
+    return NULL;
+  *ptr = *src;
+
+  ptr->b_data = malloc(src->b_size);
+  if(!ptr->b_data) {
+    free(ptr);
+    return NULL;
+  }
+  else {
+    memcpy(ptr->b_data, src->b_data, src->b_size);
+    return ptr;
+  }
+}

lib/fileinfo.h

@@ -0,0 +1,33 @@
+#ifndef HEADER_CURL_FILEINFO_H
+#define HEADER_CURL_FILEINFO_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include <curl/curl.h>
+
+struct curl_fileinfo *Curl_fileinfo_alloc(void);
+
+void Curl_fileinfo_dtor(void *, void *);
+
+struct curl_fileinfo *Curl_fileinfo_dup(const struct curl_fileinfo *src);
+
+#endif /* HEADER_CURL_FILEINFO_H */

lib/ftp.c

@@ -71,6 +71,8 @@
 #include "http.h" /* for HTTP proxy tunnel stuff */
 #include "socks.h"
 #include "ftp.h"
+#include "fileinfo.h"
+#include "ftplistparser.h"
 
 #if defined(HAVE_KRB4) || defined(HAVE_GSSAPI)
 #include "krb4.h"
@@ -144,6 +146,14 @@ static CURLcode ftp_doing(struct connectdata *conn,
                           bool *dophase_done);
 static CURLcode ftp_setup_connection(struct connectdata * conn);
 
+static CURLcode init_wc_data(struct connectdata *conn);
+static CURLcode wc_statemach(struct connectdata *conn);
+
+static void wc_data_dtor(void *ptr);
+
+static CURLcode ftp_state_post_retr_size(struct connectdata *conn,
+                                         curl_off_t filesize);
+
 /* easy-to-use macro: */
 #define FTPSENDF(x,y,z)    if((result = Curl_ftpsendf(x,y,z)) != CURLE_OK) \
                               return result
@@ -820,7 +830,7 @@ static CURLcode ftp_state_use_port(struct connectdata *conn,
   /* resolv ip/host to ip */
   rc = Curl_resolv(conn, host, 0, &h);
   if(rc == CURLRESOLV_PENDING)
-    rc = Curl_wait_for_resolv(conn, &h);
+    (void)Curl_wait_for_resolv(conn, &h);
   if(h) {
     res = h->addr;
     /* when we return from this function, we can forget about this entry
@@ -1378,7 +1388,7 @@ static CURLcode ftp_state_ul_setup(struct connectdata *conn,
         infof(data, "File already completely uploaded\n");
 
         /* no data to transfer */
-        result=Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
+        Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
 
         /* Set ->transfer so that we won't get any error in
          * ftp_done() because we didn't transfer anything! */
@@ -1469,8 +1479,14 @@ static CURLcode ftp_state_quote(struct connectdata *conn,
       if(ftp->transfer != FTPTRANSFER_BODY)
         state(conn, FTP_STOP);
       else {
-        PPSENDF(&ftpc->pp, "SIZE %s", ftpc->file);
-        state(conn, FTP_RETR_SIZE);
+        if(ftpc->known_filesize != -1) {
+          Curl_pgrsSetDownloadSize(data, ftpc->known_filesize);
+          result = ftp_state_post_retr_size(conn, ftpc->known_filesize);
+        }
+        else {
+          PPSENDF(&ftpc->pp, "SIZE %s", ftpc->file);
+          state(conn, FTP_RETR_SIZE);
+        }
       }
       break;
     case FTP_STOR_PREQUOTE:
@@ -1630,8 +1646,9 @@ static CURLcode ftp_state_pasv_resp(struct connectdata *conn,
      */
     rc = Curl_resolv(conn, conn->proxy.name, (int)conn->port, &addr);
     if(rc == CURLRESOLV_PENDING)
-      /* BLOCKING */
-      rc = Curl_wait_for_resolv(conn, &addr);
+      /* BLOCKING, ignores the return code but 'addr' will be NULL in
+         case of failure */
+      (void)Curl_wait_for_resolv(conn, &addr);
 
     connectport =
       (unsigned short)conn->port; /* we connect to the proxy's port */
@@ -1647,7 +1664,7 @@ static CURLcode ftp_state_pasv_resp(struct connectdata *conn,
     rc = Curl_resolv(conn, newhost, newport, &addr);
     if(rc == CURLRESOLV_PENDING)
       /* BLOCKING */
-      rc = Curl_wait_for_resolv(conn, &addr);
+      (void)Curl_wait_for_resolv(conn, &addr);
 
     connectport = newport; /* we connect to the remote port */
 
@@ -1973,7 +1990,7 @@ static CURLcode ftp_state_post_retr_size(struct connectdata *conn,
 
     if(ftp->downloadsize == 0) {
       /* no data to transfer */
-      result = Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
+      Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
       infof(data, "File already completely downloaded\n");
 
       /* Set ->transfer so that we won't get any error in ftp_done()
@@ -2115,8 +2132,8 @@ static CURLcode ftp_state_stor_resp(struct connectdata *conn,
   /* set the SO_SNDBUF for the secondary socket for those who need it */
   Curl_sndbufset(conn->sock[SECONDARYSOCKET]);
 
-  result = Curl_setup_transfer(conn, -1, -1, FALSE, NULL, /* no download */
-                               SECONDARYSOCKET, ftp->bytecountp);
+  Curl_setup_transfer(conn, -1, -1, FALSE, NULL, /* no download */
+                      SECONDARYSOCKET, ftp->bytecountp);
   state(conn, FTP_STOP);
 
   conn->proto.ftpc.pp.pending_resp = TRUE; /* expect a server response */
@@ -2229,11 +2246,8 @@ static CURLcode ftp_state_get_resp(struct connectdata *conn,
       infof(data, "Getting file with size: %" FORMAT_OFF_T "\n", size);
 
     /* FTP download: */
-    result=Curl_setup_transfer(conn, SECONDARYSOCKET, size, FALSE,
-                               ftp->bytecountp,
-                               -1, NULL); /* no upload here */
-    if(result)
-      return result;
+    Curl_setup_transfer(conn, SECONDARYSOCKET, size, FALSE,
+                        ftp->bytecountp, -1, NULL); /* no upload here */
 
     conn->proto.ftpc.pp.pending_resp = TRUE; /* expect server response */
     state(conn, FTP_STOP);
@@ -2857,6 +2871,8 @@ static CURLcode ftp_init(struct connectdata *conn)
   if(TRUE == isBadFtpString(ftp->passwd))
     return CURLE_URL_MALFORMAT;
 
+  conn->proto.ftpc.known_filesize = -1; /* unknown size for now */
+
   return CURLE_OK;
 }
 
@@ -3020,6 +3036,13 @@ static CURLcode ftp_done(struct connectdata *conn, CURLcode status,
   if(ftpc->prevpath)
     free(ftpc->prevpath);
 
+  if(data->set.wildcardmatch) {
+    if(data->set.chunk_end && ftpc->file) {
+      data->set.chunk_end(data->wildcard.customptr);
+    }
+    ftpc->known_filesize = -1;
+  }
+
   /* get the "raw" path */
   path = curl_easy_unescape(data, path_to_use, 0, NULL);
   if(!path) {
@@ -3180,6 +3203,8 @@ CURLcode ftp_sendquote(struct connectdata *conn, struct curl_slist *quote)
   ssize_t nread;
   int ftpcode;
   CURLcode result;
+  struct ftp_conn *ftpc = &conn->proto.ftpc;
+  struct pingpong *pp = &ftpc->pp;
 
   item = quote;
   while(item) {
@@ -3199,6 +3224,8 @@ CURLcode ftp_sendquote(struct connectdata *conn, struct curl_slist *quote)
 
       FTPSENDF(conn, "%s", cmd);
 
+      pp->response = Curl_tvnow(); /* timeout relative now */
+
       result = Curl_GetFTPResponse(&nread, conn, &ftpcode);
       if(result)
         return result;
@@ -3285,7 +3312,6 @@ ftp_pasv_verbose(struct connectdata *conn,
 static CURLcode ftp_range(struct connectdata *conn)
 {
   curl_off_t from, to;
-  curl_off_t totalsize=-1;
   char *ptr;
   char *ptr2;
   struct SessionHandle *data = conn->data;
@@ -3293,7 +3319,7 @@ static CURLcode ftp_range(struct connectdata *conn)
 
   if(data->state.use_range && data->state.range) {
     from=curlx_strtoofft(data->state.range, &ptr, 0);
-    while(ptr && *ptr && (ISSPACE(*ptr) || (*ptr=='-')))
+    while(*ptr && (ISSPACE(*ptr) || (*ptr=='-')))
       ptr++;
     to=curlx_strtoofft(ptr, &ptr2, 0);
     if(ptr == ptr2) {
@@ -3308,16 +3334,14 @@ static CURLcode ftp_range(struct connectdata *conn)
     }
     else if(from < 0) {
       /* -Y */
-      totalsize = -from;
       data->req.maxdownload = -from;
       data->state.resume_from = from;
       DEBUGF(infof(conn->data, "FTP RANGE the last %" FORMAT_OFF_T " bytes\n",
-                   totalsize));
+                   -from));
     }
     else {
       /* X-Y */
-      totalsize = to-from;
-      data->req.maxdownload = totalsize+1; /* include last byte */
+      data->req.maxdownload = (to-from)+1; /* include last byte */
       data->state.resume_from = from;
       DEBUGF(infof(conn->data, "FTP RANGE from %" FORMAT_OFF_T
                    " getting %" FORMAT_OFF_T " bytes\n",
@@ -3393,7 +3417,7 @@ static CURLcode ftp_nextconnect(struct connectdata *conn)
   if((result == CURLE_OK) && (ftp->transfer != FTPTRANSFER_BODY))
     /* no data to transfer. FIX: it feels like a kludge to have this here
        too! */
-    result = Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
+    Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
 
   /* end of transfer */
   DEBUGF(infof(data, "DO-MORE phase ends with %d\n", (int)result));
@@ -3450,6 +3474,221 @@ CURLcode ftp_perform(struct connectdata *conn,
   return result;
 }
 
+static void wc_data_dtor(void *ptr)
+{
+  struct ftp_wc_tmpdata *tmp = ptr;
+  if(tmp)
+    Curl_ftp_parselist_data_free(&tmp->parser);
+  Curl_safefree(tmp);
+}
+
+static CURLcode init_wc_data(struct connectdata *conn)
+{
+  char *last_slash;
+  char *path = conn->data->state.path;
+  struct WildcardData *wildcard = &(conn->data->wildcard);
+  CURLcode ret = CURLE_OK;
+  struct ftp_wc_tmpdata *ftp_tmp;
+
+  last_slash = strrchr(conn->data->state.path, '/');
+  if(last_slash) {
+    last_slash++;
+    if(last_slash[0] == '\0') {
+      wildcard->state = CURLWC_CLEAN;
+      ret = ftp_parse_url_path(conn);
+      return ret;
+    }
+    else {
+      wildcard->pattern = strdup(last_slash);
+      if (!wildcard->pattern)
+        return CURLE_OUT_OF_MEMORY;
+      last_slash[0] = '\0'; /* cut file from path */
+    }
+  }
+  else { /* there is only 'wildcard pattern' or nothing */
+    if(path[0]) {
+      wildcard->pattern = strdup(path);
+      if (!wildcard->pattern)
+        return CURLE_OUT_OF_MEMORY;
+      path[0] = '\0';
+    }
+    else { /* only list */
+      wildcard->state = CURLWC_CLEAN;
+      ret = ftp_parse_url_path(conn);
+      return ret;
+    }
+  }
+
+  /* program continues only if URL is not ending with slash, allocate needed
+     resources for wildcard transfer */
+
+  /* allocate ftp protocol specific temporary wildcard data */
+  ftp_tmp = malloc(sizeof(struct ftp_wc_tmpdata));
+  if(!ftp_tmp) {
+    return CURLE_OUT_OF_MEMORY;
+  }
+
+  /* INITIALIZE parselist structure */
+  ftp_tmp->parser = Curl_ftp_parselist_data_alloc();
+  if(!ftp_tmp->parser) {
+    free(ftp_tmp);
+    return CURLE_OUT_OF_MEMORY;
+  }
+
+  wildcard->tmp = ftp_tmp; /* put it to the WildcardData tmp pointer */
+  wildcard->tmp_dtor = wc_data_dtor;
+
+  /* wildcard does not support NOCWD option (assert it?) */
+  if(conn->data->set.ftp_filemethod == FTPFILE_NOCWD)
+    conn->data->set.ftp_filemethod = FTPFILE_MULTICWD;
+
+  /* try to parse ftp url */
+  ret = ftp_parse_url_path(conn);
+  if(ret) {
+    return ret;
+  }
+
+  /* backup old write_function */
+  ftp_tmp->backup.write_function = conn->data->set.fwrite_func;
+  /* parsing write function (callback included directly from ftplistparser.c) */
+  conn->data->set.fwrite_func = Curl_ftp_parselist;
+  /* backup old file descriptor */
+  ftp_tmp->backup.file_descriptor = conn->data->set.out;
+  /* let the writefunc callback know what curl pointer is working with */
+  conn->data->set.out = conn;
+
+  wildcard->path = strdup(conn->data->state.path);
+  if(!wildcard->path) {
+    return CURLE_OUT_OF_MEMORY;
+  }
+
+  infof(conn->data, "Wildcard - Parsing started\n");
+  return CURLE_OK;
+}
+
+static CURLcode wc_statemach(struct connectdata *conn)
+{
+  struct ftp_conn *ftpc = &conn->proto.ftpc;
+  struct WildcardData *wildcard = &(conn->data->wildcard);
+  struct ftp_wc_tmpdata *ftp_tmp = wildcard->tmp;
+  char *tmp_path;
+  CURLcode ret = CURLE_OK;
+  long userresponse = 0;
+  switch (wildcard->state) {
+  case CURLWC_INIT:
+    ret = init_wc_data(conn);
+    if(wildcard->state == CURLWC_CLEAN)
+      /* only listing! */
+      break;
+    else
+      wildcard->state = ret ? CURLWC_ERROR : CURLWC_MATCHING;
+    break;
+
+  case CURLWC_MATCHING:
+    /* In this state is LIST response successfully parsed, so lets restore
+       previous WRITEFUNCTION callback and WRITEDATA pointer */
+    ftp_tmp = wildcard->tmp;
+    conn->data->set.fwrite_func = ftp_tmp->backup.write_function;
+    conn->data->set.out = ftp_tmp->backup.file_descriptor;
+    wildcard->state = CURLWC_DOWNLOADING;
+
+    if(Curl_ftp_parselist_geterror(ftp_tmp->parser)) {
+      /* error found in LIST parsing */
+      wildcard->state = CURLWC_CLEAN;
+      return wc_statemach(conn);
+    }
+    else if(wildcard->filelist->size == 0) {
+      /* no corresponding file */
+      wildcard->state = CURLWC_CLEAN;
+      return CURLE_REMOTE_FILE_NOT_FOUND;
+    }
+    ret = wc_statemach(conn);
+    break;
+
+  case CURLWC_DOWNLOADING: {
+    /* filelist has at least one file, lets get first one */
+    struct curl_fileinfo *finfo = wildcard->filelist->head->ptr;
+    tmp_path = malloc(strlen(conn->data->state.path) +
+                      strlen(finfo->filename) + 1);
+    if(!tmp_path) {
+      return CURLE_OUT_OF_MEMORY;
+    }
+
+    tmp_path[0] = 0;
+    /* make full path to matched file */
+    strcat(tmp_path, wildcard->path);
+    strcat(tmp_path, finfo->filename);
+    /* switch default "state.pathbuffer" and tmp_path, good to see
+       ftp_parse_url_path function to understand this trick */
+    if(conn->data->state.pathbuffer)
+      free(conn->data->state.pathbuffer);
+    conn->data->state.pathbuffer = tmp_path;
+    conn->data->state.path = tmp_path;
+
+    infof(conn->data, "Wildcard - START of \"%s\"\n", finfo->filename);
+    if(conn->data->set.chunk_bgn) {
+      userresponse = conn->data->set.chunk_bgn(
+          finfo, wildcard->customptr, (int)wildcard->filelist->size);
+      switch(userresponse) {
+      case CURL_CHUNK_BGN_FUNC_SKIP:
+        infof(conn->data, "Wildcard - \"%s\" skipped by user\n",
+              finfo->filename);
+        wildcard->state = CURLWC_SKIP;
+        return wc_statemach(conn);
+      case CURL_CHUNK_BGN_FUNC_FAIL:
+        return CURLE_CHUNK_FAILED;
+      }
+    }
+
+    if(finfo->filetype != CURLFILETYPE_FILE) {
+      wildcard->state = CURLWC_SKIP;
+      return wc_statemach(conn);
+    }
+
+    if(finfo->flags & CURLFINFOFLAG_KNOWN_SIZE)
+      ftpc->known_filesize = finfo->size;
+
+    ret = ftp_parse_url_path(conn);
+    if(ret) {
+      return ret;
+    }
+
+    /* we don't need the Curl_fileinfo of first file anymore */
+    Curl_llist_remove(wildcard->filelist, wildcard->filelist->head, NULL);
+
+    if(wildcard->filelist->size == 0) { /* remains only one file to down. */
+      wildcard->state = CURLWC_CLEAN;
+      /* after that will be ftp_do called once again and no transfer
+         will be done because of CURLWC_CLEAN state */
+      return CURLE_OK;
+    }
+  } break;
+
+  case CURLWC_SKIP: {
+    if(conn->data->set.chunk_end)
+      conn->data->set.chunk_end(conn->data->wildcard.customptr);
+    Curl_llist_remove(wildcard->filelist, wildcard->filelist->head, NULL);
+    wildcard->state = (wildcard->filelist->size == 0) ?
+                      CURLWC_CLEAN : CURLWC_DOWNLOADING;
+    ret = wc_statemach(conn);
+  } break;
+
+  case CURLWC_CLEAN:
+    ret = CURLE_OK;
+    if(ftp_tmp) {
+      ret = Curl_ftp_parselist_geterror(ftp_tmp->parser);
+    }
+    wildcard->state = ret ? CURLWC_ERROR : CURLWC_DONE;
+    break;
+
+  case CURLWC_DONE:
+  case CURLWC_ERROR:
+    break;
+  }
+
+  return ret;
+}
+
 /***********************************************************************
  *
  * ftp_do()
@@ -3476,9 +3715,21 @@ static CURLcode ftp_do(struct connectdata *conn, bool *done)
   if(retcode)
     return retcode;
 
-  retcode = ftp_parse_url_path(conn);
-  if(retcode)
-    return retcode;
+  if(conn->data->set.wildcardmatch) {
+    retcode = wc_statemach(conn);
+    if(conn->data->wildcard.state == CURLWC_SKIP ||
+      conn->data->wildcard.state == CURLWC_DONE) {
+      /* do not call ftp_regular_transfer */
+      return CURLE_OK;
+    }
+    if(retcode) /* error, loop or skipping the file */
+      return retcode;
+  }
+  else { /* no wildcard FSM needed */
+    retcode = ftp_parse_url_path(conn);
+    if(retcode)
+      return retcode;
+  }
 
   retcode = ftp_regular_transfer(conn, done);
 
@@ -3820,7 +4071,7 @@ static CURLcode ftp_dophase_done(struct connectdata *conn,
 
   if(ftp->transfer != FTPTRANSFER_BODY)
     /* no data to transfer */
-    result=Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
+    Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
   else if(!connected)
     /* since we didn't connect now, we want do_more to get called */
     conn->bits.do_more = TRUE;
@@ -3927,6 +4178,7 @@ static CURLcode ftp_setup_connection(struct connectdata * conn)
   }
 
   data->state.path++;   /* don't include the initial slash */
+  data->state.slash_removed = TRUE; /* we've skipped the slash */
 
   /* FTP URLs support an extension like ";type=<typecode>" that
    * we'll try to get now! */
@@ -3938,6 +4190,7 @@ static CURLcode ftp_setup_connection(struct connectdata * conn)
   if(type) {
     *type = 0;                     /* it was in the middle of the hostname */
     command = Curl_raw_toupper(type[6]);
+    conn->bits.type_set = TRUE;
 
     switch (command) {
     case 'A': /* ASCII mode */

lib/ftp.h

@@ -79,6 +79,17 @@ typedef enum {
   FTP_LAST  /* never used */
 } ftpstate;
 
+struct ftp_parselist_data; /* defined later in ftplistparser.c */
+
+struct ftp_wc_tmpdata {
+  struct ftp_parselist_data *parser;
+
+  struct {
+    curl_write_callback write_function;
+    FILE *file_descriptor;
+  } backup;
+};
+
 typedef enum {
   FTPFILE_MULTICWD  = 1, /* as defined by RFC1738 */
   FTPFILE_NOCWD     = 2, /* use SIZE / RETR / STOR on the full path */
@@ -135,6 +146,8 @@ struct ftp_conn {
   int count3; /* general purpose counter for the state machine */
   ftpstate state; /* always use ftp.c:state() to change state! */
   char * server_os;     /* The target server operating system. */
+  curl_off_t known_filesize; /* file size is different from -1, if wildcard
+                                LIST parsing was done and wc_statemach set it */
 };
 
 #endif /* HEADER_CURL_FTP_H */

lib/ftplistparser.h

@@ -0,0 +1,39 @@
+#ifndef HEADER_CURL_FTPLISTPARSER_H
+#define HEADER_CURL_FTPLISTPARSER_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include <curl/curl.h>
+
+/* WRITEFUNCTION callback for parsing LIST responses */
+size_t Curl_ftp_parselist(char *buffer, size_t size, size_t nmemb,
+                          void *connptr);
+
+struct ftp_parselist_data; /* defined inside ftplibparser.c */
+
+CURLcode Curl_ftp_parselist_geterror(struct ftp_parselist_data *pl_data);
+
+struct ftp_parselist_data *Curl_ftp_parselist_data_alloc(void);
+
+void Curl_ftp_parselist_data_free(struct ftp_parselist_data **pl_data);
+
+#endif /* HEADER_CURL_FTPLISTPARSER_H */

lib/getinfo.c

@@ -66,6 +66,12 @@ CURLcode Curl_initinfo(struct SessionHandle *data)
   info->header_size = 0;
   info->request_size = 0;
   info->numconnects = 0;
+
+  info->ip[0] = 0;
+  info->port = 0;
+  info->localip[0] = 0;
+  info->localport = 0;
+
   return CURLE_OK;
 }
 
@@ -224,6 +230,19 @@ CURLcode Curl_getinfo(struct SessionHandle *data, CURLINFO info, ...)
     /* Return the ip address of the most recent (primary) connection */
     *param_charp = data->info.ip;
     break;
+  case CURLINFO_PRIMARY_PORT:
+    /* Return the (remote) port of the most recent (primary) connection */
+    *param_longp = data->info.port;
+    break;
+  case CURLINFO_LOCAL_IP:
+    /* Return the source/local ip address of the most recent (primary)
+       connection */
+    *param_charp = data->info.localip;
+    break;
+  case CURLINFO_LOCAL_PORT:
+    /* Return the local port of the most recent (primary) connection */
+    *param_longp = data->info.localport;
+    break;
   case CURLINFO_CERTINFO:
     /* Return the a pointer to the certinfo struct. Not really an slist
        pointer but we can pretend it is here */

lib/gtls.c

@@ -182,54 +182,76 @@ static void unload_file(gnutls_datum data) {
 }
 
 
-/* this function does a BLOCKING SSL/TLS (re-)handshake */
+/* this function does a SSL/TLS (re-)handshake */
 static CURLcode handshake(struct connectdata *conn,
-                          gnutls_session session,
                           int sockindex,
-                          bool duringconnect)
+                          bool duringconnect,
+                          bool nonblocking)
 {
   struct SessionHandle *data = conn->data;
+  struct ssl_connect_data *connssl = &conn->ssl[sockindex];
+  gnutls_session session = conn->ssl[sockindex].session;
+  curl_socket_t sockfd = conn->sock[sockindex];
+  long timeout_ms;
   int rc;
-  if(!gtls_inited)
-    Curl_gtls_init();
-  do {
-    rc = gnutls_handshake(session);
+  int what;
 
-    if((rc == GNUTLS_E_AGAIN) || (rc == GNUTLS_E_INTERRUPTED)) {
-      long timeout_ms = Curl_timeleft(conn, NULL, duringconnect);
+  while(1) {
+    /* check allowed time left */
+    timeout_ms = Curl_timeleft(conn, NULL, duringconnect);
 
-      if(timeout_ms < 0) {
-        /* a precaution, no need to continue if time already is up */
-        failf(data, "SSL connection timeout");
-        return CURLE_OPERATION_TIMEDOUT;
-      }
+    if(timeout_ms < 0) {
+      /* no need to continue if time already is up */
+      failf(data, "SSL connection timeout");
+      return CURLE_OPERATION_TIMEDOUT;
+    }
 
-      rc = Curl_socket_ready(conn->sock[sockindex],
-                       conn->sock[sockindex], (int)timeout_ms);
-      if(rc > 0)
-        /* reabable or writable, go loop*/
-        continue;
-      else if(0 == rc) {
-        /* timeout */
-        failf(data, "SSL connection timeout");
-        return CURLE_OPERATION_TIMEDOUT;
-      }
-      else {
-        /* anything that gets here is fatally bad */
+    /* if ssl is expecting something, check if it's available. */
+    if(connssl->connecting_state == ssl_connect_2_reading
+       || connssl->connecting_state == ssl_connect_2_writing) {
+
+      curl_socket_t writefd = ssl_connect_2_writing==
+        connssl->connecting_state?sockfd:CURL_SOCKET_BAD;
+      curl_socket_t readfd = ssl_connect_2_reading==
+        connssl->connecting_state?sockfd:CURL_SOCKET_BAD;
+
+      what = Curl_socket_ready(readfd, writefd,
+                               nonblocking?0:(int)timeout_ms);
+      if(what < 0) {
+        /* fatal error */
         failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO);
         return CURLE_SSL_CONNECT_ERROR;
       }
+      else if(0 == what) {
+        if(nonblocking) {
+          return CURLE_OK;
+        }
+        else {
+          /* timeout */
+          failf(data, "SSL connection timeout");
+          return CURLE_OPERATION_TIMEDOUT;
+        }
+      }
+      /* socket is readable or writable */
     }
-    else
-      break;
-  } while(1);
 
-  if(rc < 0) {
-    failf(data, "gnutls_handshake() failed: %s", gnutls_strerror(rc));
-    return CURLE_SSL_CONNECT_ERROR;
+    rc = gnutls_handshake(session);
+
+    if((rc == GNUTLS_E_AGAIN) || (rc == GNUTLS_E_INTERRUPTED)) {
+      connssl->connecting_state =
+        gnutls_record_get_direction(session)?
+        ssl_connect_2_writing:ssl_connect_2_reading;
+      if(nonblocking) {
+        return CURLE_OK;
+      }
+    } else if (rc < 0) {
+      failf(data, "gnutls_handshake() failed: %s", gnutls_strerror(rc));
+    } else {
+      /* Reset our connect state machine */
+      connssl->connecting_state = ssl_connect_1;
+      return CURLE_OK;
+    }
   }
-
-  return CURLE_OK;
 }
 
 static gnutls_x509_crt_fmt do_file_type(const char *type)
@@ -243,31 +265,14 @@ static gnutls_x509_crt_fmt do_file_type(const char *type)
   return -1;
 }
 
-
-/*
- * This function is called after the TCP connect has completed. Setup the TLS
- * layer and do all necessary magic.
- */
-CURLcode
-Curl_gtls_connect(struct connectdata *conn,
-                  int sockindex)
-
+static CURLcode
+gtls_connect_step1(struct connectdata *conn,
+                   int sockindex)
 {
   static const int cert_type_priority[] = { GNUTLS_CRT_X509, 0 };
   struct SessionHandle *data = conn->data;
   gnutls_session session;
   int rc;
-  unsigned int cert_list_size;
-  const gnutls_datum *chainp;
-  unsigned int verify_status;
-  gnutls_x509_crt x509_cert,x509_issuer;
-  gnutls_datum issuerp;
-  char certbuf[256]; /* big enough? */
-  size_t size;
-  unsigned int algo;
-  unsigned int bits;
-  time_t certclock;
-  const char *ptr;
   void *ssl_sessionid;
   size_t ssl_idsize;
   bool sni = TRUE; /* default is SNI enabled */
@@ -411,10 +416,32 @@ Curl_gtls_connect(struct connectdata *conn,
     infof (data, "SSL re-using session ID\n");
   }
 
-  rc = handshake(conn, session, sockindex, TRUE);
-  if(rc)
-    /* handshake() sets its own error message with failf() */
-    return rc;
+  return CURLE_OK;
+}
+
+static Curl_recv gtls_recv;
+static Curl_send gtls_send;
+
+static CURLcode
+gtls_connect_step3(struct connectdata *conn,
+                   int sockindex)
+{
+  unsigned int cert_list_size;
+  const gnutls_datum *chainp;
+  unsigned int verify_status;
+  gnutls_x509_crt x509_cert,x509_issuer;
+  gnutls_datum issuerp;
+  char certbuf[256]; /* big enough? */
+  size_t size;
+  unsigned int algo;
+  unsigned int bits;
+  time_t certclock;
+  const char *ptr;
+  struct SessionHandle *data = conn->data;
+  gnutls_session session = conn->ssl[sockindex].session;
+  int rc;
+  int incache;
+  void *ssl_sessionid;
 
   /* This function will return the peer's raw certificate (chain) as sent by
      the peer. These certificates are in raw format (DER encoded for
@@ -606,6 +633,8 @@ Curl_gtls_connect(struct connectdata *conn,
   infof(data, "\t MAC: %s\n", ptr);
 
   conn->ssl[sockindex].state = ssl_connection_complete;
+  conn->recv[sockindex] = gtls_recv;
+  conn->send[sockindex] = gtls_send;
 
   {
     /* we always unconditionally get the session id here, as even if we
@@ -623,33 +652,100 @@ Curl_gtls_connect(struct connectdata *conn,
       /* extract session ID to the allocated buffer */
       gnutls_session_get_data(session, connect_sessionid, &connect_idsize);
 
-      if(ssl_sessionid)
+      incache = !(Curl_ssl_getsessionid(conn, &ssl_sessionid, NULL));
+      if (incache) {
         /* there was one before in the cache, so instead of risking that the
            previous one was rejected, we just kill that and store the new */
         Curl_ssl_delsessionid(conn, ssl_sessionid);
+      }
 
       /* store this session id */
       return Curl_ssl_addsessionid(conn, connect_sessionid, connect_idsize);
     }
-
   }
 
   return CURLE_OK;
 }
 
 
-/* for documentation see Curl_ssl_send() in sslgen.h */
-ssize_t Curl_gtls_send(struct connectdata *conn,
-                       int sockindex,
-                       const void *mem,
-                       size_t len,
-                       int *curlcode)
+/*
+ * This function is called after the TCP connect has completed. Setup the TLS
+ * layer and do all necessary magic.
+ */
+/* We use connssl->connecting_state to keep track of the connection status;
+   there are three states: 'ssl_connect_1' (not started yet or complete),
+   'ssl_connect_2_reading' (waiting for data from server), and
+   'ssl_connect_2_writing' (waiting to be able to write).
+ */
+static CURLcode
+gtls_connect_common(struct connectdata *conn,
+                    int sockindex,
+                    bool nonblocking,
+                    bool *done)
+{
+  int rc;
+  struct ssl_connect_data *connssl = &conn->ssl[sockindex];
+
+  /* Initiate the connection, if not already done */
+  if(ssl_connect_1==connssl->connecting_state) {
+    rc = gtls_connect_step1 (conn, sockindex);
+    if(rc)
+      return rc;
+  }
+
+  rc = handshake(conn, sockindex, TRUE, nonblocking);
+  if(rc)
+    /* handshake() sets its own error message with failf() */
+    return rc;
+
+  /* Finish connecting once the handshake is done */
+  if(ssl_connect_1==connssl->connecting_state) {
+    rc = gtls_connect_step3(conn, sockindex);
+    if(rc)
+      return rc;
+  }
+
+  *done = ssl_connect_1==connssl->connecting_state;
+
+  return CURLE_OK;
+}
+
+CURLcode
+Curl_gtls_connect_nonblocking(struct connectdata *conn,
+                              int sockindex,
+                              bool *done)
+{
+  return gtls_connect_common(conn, sockindex, TRUE, done);
+}
+
+CURLcode
+Curl_gtls_connect(struct connectdata *conn,
+                  int sockindex)
+
+{
+  CURLcode retcode;
+  bool done = FALSE;
+
+  retcode = gtls_connect_common(conn, sockindex, FALSE, &done);
+  if(retcode)
+    return retcode;
+
+  DEBUGASSERT(done);
+
+  return CURLE_OK;
+}
+
+static ssize_t gtls_send(struct connectdata *conn,
+                         int sockindex,
+                         const void *mem,
+                         size_t len,
+                         CURLcode *curlcode)
 {
   ssize_t rc = gnutls_record_send(conn->ssl[sockindex].session, mem, len);
 
   if(rc < 0 ) {
     *curlcode = (rc == GNUTLS_E_AGAIN)
-      ? /* EWOULDBLOCK */ -1
+      ? CURLE_AGAIN
       : CURLE_SEND_ERROR;
 
     rc = -1;
@@ -751,36 +847,29 @@ int Curl_gtls_shutdown(struct connectdata *conn, int sockindex)
   return retval;
 }
 
-/* for documentation see Curl_ssl_recv() in sslgen.h */
-ssize_t Curl_gtls_recv(struct connectdata *conn, /* connection data */
-                       int num,                  /* socketindex */
-                       char *buf,                /* store read data here */
-                       size_t buffersize,        /* max amount to read */
-                       int *curlcode)
+static ssize_t gtls_recv(struct connectdata *conn, /* connection data */
+                         int num,                  /* socketindex */
+                         char *buf,                /* store read data here */
+                         size_t buffersize,        /* max amount to read */
+                         CURLcode *curlcode)
 {
   ssize_t ret;
 
   ret = gnutls_record_recv(conn->ssl[num].session, buf, buffersize);
   if((ret == GNUTLS_E_AGAIN) || (ret == GNUTLS_E_INTERRUPTED)) {
-    *curlcode = -1;
+    *curlcode = CURLE_AGAIN;
     return -1;
   }
 
   if(ret == GNUTLS_E_REHANDSHAKE) {
     /* BLOCKING call, this is bad but a work-around for now. Fixing this "the
        proper way" takes a whole lot of work. */
-    CURLcode rc = handshake(conn, conn->ssl[num].session, num, FALSE);
+    CURLcode rc = handshake(conn, num, FALSE, FALSE);
     if(rc)
       /* handshake() writes error message on its own */
       *curlcode = rc;
     else
-      *curlcode = -1; /* then return as if this was a wouldblock */
-    return -1;
-  }
-
-  if(!ret) {
-    failf(conn->data, "Peer closed the TLS connection");
-    *curlcode = CURLE_RECV_ERROR;
+      *curlcode = CURLE_AGAIN; /* then return as if this was a wouldblock */
     return -1;
   }
 

lib/gtls.h

@@ -27,6 +27,9 @@
 int Curl_gtls_init(void);
 int Curl_gtls_cleanup(void);
 CURLcode Curl_gtls_connect(struct connectdata *conn, int sockindex);
+CURLcode Curl_gtls_connect_nonblocking(struct connectdata *conn,
+                                       int sockindex,
+                                       bool *done);
 
 /* tell GnuTLS to close down all open information regarding connections (and
    thus session ID caching etc) */
@@ -35,14 +38,6 @@ void Curl_gtls_close_all(struct SessionHandle *data);
  /* close a SSL connection */
 void Curl_gtls_close(struct connectdata *conn, int sockindex);
 
-/* for documentation see Curl_ssl_send() in sslgen.h */
-ssize_t Curl_gtls_send(struct connectdata *conn, int sockindex,
-                       const void *mem, size_t len, int *curlcode);
-
-/* for documentation see Curl_ssl_recv() in sslgen.h */
-ssize_t Curl_gtls_recv(struct connectdata *conn, int num, char *buf,
-                       size_t buffersize, int *curlcode);
-
 void Curl_gtls_session_free(void *ptr);
 size_t Curl_gtls_version(char *buffer, size_t size);
 int Curl_gtls_shutdown(struct connectdata *conn, int sockindex);
@@ -52,6 +47,7 @@ int Curl_gtls_seed(struct SessionHandle *data);
 #define curlssl_init Curl_gtls_init
 #define curlssl_cleanup Curl_gtls_cleanup
 #define curlssl_connect Curl_gtls_connect
+#define curlssl_connect_nonblocking Curl_gtls_connect_nonblocking
 #define curlssl_session_free(x)  Curl_gtls_session_free(x)
 #define curlssl_close_all Curl_gtls_close_all
 #define curlssl_close Curl_gtls_close
@@ -59,8 +55,6 @@ int Curl_gtls_seed(struct SessionHandle *data);
 #define curlssl_set_engine(x,y) (x=x, y=y, CURLE_FAILED_INIT)
 #define curlssl_set_engine_default(x) (x=x, CURLE_FAILED_INIT)
 #define curlssl_engines_list(x) (x=x, (struct curl_slist *)NULL)
-#define curlssl_send Curl_gtls_send
-#define curlssl_recv Curl_gtls_recv
 #define curlssl_version Curl_gtls_version
 #define curlssl_check_cxn(x) (x=x, -1)
 #define curlssl_data_pending(x,y) (x=x, y=y, 0)

lib/hmac.c

@@ -0,0 +1,131 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * RFC2104 Keyed-Hashing for Message Authentication
+ *
+ ***************************************************************************/
+
+#include "setup.h"
+
+#ifndef CURL_DISABLE_CRYPTO_AUTH
+
+#include "curl_hmac.h"
+
+#define _MPRINTF_REPLACE /* use our functions only */
+#include <curl/mprintf.h>
+
+#include "curl_memory.h"
+/* The last #include file should be: */
+#include "memdebug.h"
+
+/*
+ * Generic HMAC algorithm.
+ *
+ *   This module computes HMAC digests based on any hash function. Parameters
+ * and computing procedures are set-up dynamically at HMAC computation
+ * context initialisation.
+ */
+
+static const unsigned char hmac_ipad = 0x36;
+static const unsigned char hmac_opad = 0x5C;
+
+
+
+HMAC_context *
+Curl_HMAC_init(const HMAC_params * hashparams,
+               const unsigned char * key,
+               unsigned int keylen)
+{
+  size_t i;
+  HMAC_context * ctxt;
+  unsigned char * hkey;
+  unsigned char b;
+
+  /* Create HMAC context. */
+  i = sizeof *ctxt + 2 * hashparams->hmac_ctxtsize + hashparams->hmac_resultlen;
+  ctxt = (HMAC_context *) malloc(i);
+
+  if(!ctxt)
+    return ctxt;
+
+  ctxt->hmac_hash = hashparams;
+  ctxt->hmac_hashctxt1 = (void *) (ctxt + 1);
+  ctxt->hmac_hashctxt2 = (void *) ((char *) ctxt->hmac_hashctxt1 +
+      hashparams->hmac_ctxtsize);
+
+  /* If the key is too long, replace it by its hash digest. */
+  if(keylen > hashparams->hmac_maxkeylen) {
+    (*hashparams->hmac_hinit)(ctxt->hmac_hashctxt1);
+    (*hashparams->hmac_hupdate)(ctxt->hmac_hashctxt1, key, keylen);
+    hkey = (unsigned char *) ctxt->hmac_hashctxt2 + hashparams->hmac_ctxtsize;
+    (*hashparams->hmac_hfinal)(hkey, ctxt->hmac_hashctxt1);
+    key = hkey;
+    keylen = hashparams->hmac_resultlen;
+  }
+
+  /* Prime the two hash contexts with the modified key. */
+  (*hashparams->hmac_hinit)(ctxt->hmac_hashctxt1);
+  (*hashparams->hmac_hinit)(ctxt->hmac_hashctxt2);
+
+  for (i = 0; i < keylen; i++) {
+    b = *key ^ hmac_ipad;
+    (*hashparams->hmac_hupdate)(ctxt->hmac_hashctxt1, &b, 1);
+    b = *key++ ^ hmac_opad;
+    (*hashparams->hmac_hupdate)(ctxt->hmac_hashctxt2, &b, 1);
+  }
+
+  for (; i < hashparams->hmac_maxkeylen; i++) {
+    (*hashparams->hmac_hupdate)(ctxt->hmac_hashctxt1, &hmac_ipad, 1);
+    (*hashparams->hmac_hupdate)(ctxt->hmac_hashctxt2, &hmac_opad, 1);
+  }
+
+  /* Done, return pointer to HMAC context. */
+  return ctxt;
+}
+
+int Curl_HMAC_update(HMAC_context * ctxt,
+                     const unsigned char * data,
+                     unsigned int len)
+{
+  /* Update first hash calculation. */
+  (*ctxt->hmac_hash->hmac_hupdate)(ctxt->hmac_hashctxt1, data, len);
+  return 0;
+}
+
+
+int Curl_HMAC_final(HMAC_context * ctxt, unsigned char * result)
+{
+  const HMAC_params * hashparams = ctxt->hmac_hash;
+
+  /* Do not get result if called with a null parameter: only release storage. */
+
+  if(!result)
+    result = (unsigned char *) ctxt->hmac_hashctxt2 +
+     ctxt->hmac_hash->hmac_ctxtsize;
+
+  (*hashparams->hmac_hfinal)(result, ctxt->hmac_hashctxt1);
+  (*hashparams->hmac_hupdate)(ctxt->hmac_hashctxt2,
+   result, hashparams->hmac_resultlen);
+  (*hashparams->hmac_hfinal)(result, ctxt->hmac_hashctxt2);
+  free((char *) ctxt);
+  return 0;
+}
+
+#endif /* CURL_DISABLE_CRYPTO_AUTH */

lib/hostares.c

@@ -251,7 +251,7 @@ CURLcode Curl_wait_for_resolv(struct connectdata *conn,
        second is left, otherwise just use 1000ms to make sure the progress
        callback gets called frequent enough */
     if(!tvp->tv_sec)
-      timeout_ms = tvp->tv_usec/1000;
+      timeout_ms = (int)(tvp->tv_usec/1000);
     else
       timeout_ms = 1000;
 

lib/hostip4.c

@@ -160,7 +160,7 @@ Curl_addrinfo *Curl_ipv4_resolve_r(const char *hostname,
       snprintf(sbuf, sizeof(sbuf), "%d", port);
       sbufptr = sbuf;
     }
-    hints.ai_flags = AI_CANONNAME;
+
     (void)Curl_getaddrinfo_ex(hostname, sbufptr, &hints, &ai);
 
 #elif defined(HAVE_GETHOSTBYNAME_R)

lib/hostip6.c

@@ -213,11 +213,6 @@ Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
     /* the given address is numerical only, prevent a reverse lookup */
     hints.ai_flags = AI_NUMERICHOST;
   }
-#ifdef HAVE_GSSAPI
-  if(conn->data->set.krb)
-    /* if krb is used, we (might) need the canonical host name */
-    hints.ai_flags |= AI_CANONNAME;
-#endif
 
   if(port) {
     snprintf(sbuf, sizeof(sbuf), "%d", port);

lib/hostthre.c

@@ -451,6 +451,9 @@ CURLcode Curl_is_resolved(struct connectdata *conn,
 
     td->interval_end = elapsed + td->poll_interval;
 
+    /* Reset old timer so we can set a new one further in the future */
+    Curl_expire(conn->data, 0);
+
     Curl_expire(conn->data, td->poll_interval);
   }
 
@@ -484,8 +487,6 @@ Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
                                 int port,
                                 int *waitp)
 {
-  struct hostent *h = NULL;
-  struct SessionHandle *data = conn->data;
   struct in_addr in;
 
   *waitp = 0; /* default to synchronous response */
@@ -561,9 +562,7 @@ Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
   memset(&hints, 0, sizeof(hints));
   hints.ai_family = pf;
   hints.ai_socktype = conn->socktype;
-#if 0 /* removed nov 8 2005 before 7.15.1 */
-  hints.ai_flags = AI_CANONNAME;
-#endif
+
   snprintf(sbuf, sizeof(sbuf), "%d", port);
 
   /* fire up a new resolver thread! */

lib/http.c

@@ -977,12 +977,15 @@ Curl_send_buffer *Curl_add_buffer_init(void)
  * Returns CURLcode
  */
 CURLcode Curl_add_buffer_send(Curl_send_buffer *in,
-                         struct connectdata *conn,
-                         long *bytes_written, /* add the number of sent bytes
-                                                 to this counter */
-                         size_t included_body_bytes, /* how much of the buffer
-                                                        contains body data */
-                         int socketindex)
+                              struct connectdata *conn,
+
+                               /* add the number of sent bytes to this
+                                  counter */
+                              long *bytes_written,
+
+                               /* how much of the buffer contains body data */
+                              size_t included_body_bytes,
+                              int socketindex)
 
 {
   ssize_t amount;
@@ -1069,7 +1072,10 @@ CURLcode Curl_add_buffer_send(Curl_send_buffer *in,
          accordingly */
       http->writebytecount += bodylen;
 
-    *bytes_written += amount;
+    /* 'amount' can never be a very large value here so typecasting it so a
+       signed 31 bit value should not cause problems even if ssize_t is
+       64bit */
+    *bytes_written += (long)amount;
 
     if(http) {
       if((size_t)amount != size) {
@@ -1283,7 +1289,6 @@ CURLcode Curl_proxyCONNECT(struct connectdata *conn,
   struct SessionHandle *data=conn->data;
   struct SingleRequest *k = &data->req;
   CURLcode result;
-  int res;
   long timeout =
     data->set.timeout?data->set.timeout:PROXY_TIMEOUT; /* in milliseconds */
   curl_socket_t tunnelsocket = conn->sock[sockindex];
@@ -1381,7 +1386,7 @@ CURLcode Curl_proxyCONNECT(struct connectdata *conn,
         if(CURLE_OK == result) {
           /* Now send off the request */
           result = Curl_add_buffer_send(req_buffer, conn,
-                                   &data->info.request_size, 0, sockindex);
+                                        &data->info.request_size, 0, sockindex);
         }
         req_buffer = NULL;
         if(result)
@@ -1467,11 +1472,10 @@ CURLcode Curl_proxyCONNECT(struct connectdata *conn,
           break;
         default:
           DEBUGASSERT(ptr+BUFSIZE-nread <= data->state.buffer+BUFSIZE+1);
-          res = Curl_read(conn, tunnelsocket, ptr, BUFSIZE-nread, &gotbytes);
-          if(res< 0)
-            /* EWOULDBLOCK */
+          result = Curl_read(conn, tunnelsocket, ptr, BUFSIZE-nread, &gotbytes);
+          if(result==CURLE_AGAIN)
             continue; /* go loop yourself */
-          else if(res)
+          else if(result)
             keepon = FALSE;
           else if(gotbytes <= 0) {
             keepon = FALSE;
@@ -1817,9 +1821,9 @@ static CURLcode https_connecting(struct connectdata *conn, bool *done)
 }
 #endif
 
-#ifdef USE_SSLEAY
-/* This function is OpenSSL-specific. It should be made to query the generic
-   SSL layer instead. */
+#if defined(USE_SSLEAY) || defined(USE_GNUTLS)
+/* This function is for OpenSSL and GnuTLS only. It should be made to query
+   the generic SSL layer instead. */
 static int https_getsock(struct connectdata *conn,
                          curl_socket_t *socks,
                          int numsocks)
@@ -1844,17 +1848,6 @@ static int https_getsock(struct connectdata *conn,
   return CURLE_OK;
 }
 #else
-#ifdef USE_GNUTLS
-static int https_getsock(struct connectdata *conn,
-                         curl_socket_t *socks,
-                         int numsocks)
-{
-  (void)conn;
-  (void)socks;
-  (void)numsocks;
-  return GETSOCK_BLANK;
-}
-#else
 #ifdef USE_NSS
 static int https_getsock(struct connectdata *conn,
                          curl_socket_t *socks,
@@ -1876,6 +1869,17 @@ static int https_getsock(struct connectdata *conn,
   (void)numsocks;
   return GETSOCK_BLANK;
 }
+#else
+#ifdef USE_POLARSSL
+static int https_getsock(struct connectdata *conn,
+                         curl_socket_t *socks,
+                         int numsocks)
+{
+  (void)conn;
+  (void)socks;
+  (void)numsocks;
+  return GETSOCK_BLANK;
+}
 #endif
 #endif
 #endif
@@ -2224,7 +2228,10 @@ CURLcode Curl_http(struct connectdata *conn, bool *done)
     if((conn->protocol&PROT_HTTP) &&
         data->set.upload &&
         (data->set.infilesize == -1)) {
-      if (use_http_1_1(data, conn)) {
+      if(conn->bits.authneg)
+        /* don't enable chunked during auth neg */
+        ;
+      else if(use_http_1_1(data, conn)) {
         /* HTTP, upload, unknown file size and not HTTP 1.0 */
         data->req.upload_chunky = TRUE;
       }
@@ -2529,7 +2536,8 @@ CURLcode Curl_http(struct connectdata *conn, bool *done)
   /* url */
   if (paste_ftp_userpwd)
     result = Curl_add_bufferf(req_buffer, "ftp://%s:%s@%s",
-        conn->user, conn->passwd, ppath + sizeof("ftp://") - 1);
+                              conn->user, conn->passwd,
+                              ppath + sizeof("ftp://") - 1);
   else
     result = Curl_add_buffer(req_buffer, ppath, strlen(ppath));
   if (result)
@@ -2665,14 +2673,13 @@ CURLcode Curl_http(struct connectdata *conn, bool *done)
         return result;
 
       result = Curl_add_buffer_send(req_buffer, conn,
-                               &data->info.request_size, 0, FIRSTSOCKET);
+                                    &data->info.request_size, 0, FIRSTSOCKET);
       if(result)
         failf(data, "Failed sending POST request");
       else
         /* setup variables for the upcoming transfer */
-        result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE,
-                                     &http->readbytecount,
-                                     -1, NULL);
+        Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, &http->readbytecount,
+                            -1, NULL);
       break;
     }
 
@@ -2735,15 +2742,14 @@ CURLcode Curl_http(struct connectdata *conn, bool *done)
 
     /* fire away the whole request to the server */
     result = Curl_add_buffer_send(req_buffer, conn,
-                             &data->info.request_size, 0, FIRSTSOCKET);
+                                  &data->info.request_size, 0, FIRSTSOCKET);
     if(result)
       failf(data, "Failed sending POST request");
     else
       /* setup variables for the upcoming transfer */
-      result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE,
-                                   &http->readbytecount,
-                                   FIRSTSOCKET,
-                                   &http->writebytecount);
+      Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE,
+                          &http->readbytecount, FIRSTSOCKET,
+                          &http->writebytecount);
 
     if(result) {
       Curl_formclean(&http->sendit); /* free that whole lot */
@@ -2788,15 +2794,14 @@ CURLcode Curl_http(struct connectdata *conn, bool *done)
 
     /* this sends the buffer and frees all the buffer resources */
     result = Curl_add_buffer_send(req_buffer, conn,
-                             &data->info.request_size, 0, FIRSTSOCKET);
+                                  &data->info.request_size, 0, FIRSTSOCKET);
     if(result)
       failf(data, "Failed sending PUT request");
     else
       /* prepare for transfer */
-      result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE,
-                                   &http->readbytecount,
-                                   postsize?FIRSTSOCKET:-1,
-                                   postsize?&http->writebytecount:NULL);
+      Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE,
+                          &http->readbytecount, postsize?FIRSTSOCKET:-1,
+                          postsize?&http->writebytecount:NULL);
     if(result)
       return result;
     break;
@@ -2938,16 +2943,14 @@ CURLcode Curl_http(struct connectdata *conn, bool *done)
     }
     /* issue the request */
     result = Curl_add_buffer_send(req_buffer, conn, &data->info.request_size,
-                             (size_t)included_body, FIRSTSOCKET);
+                                  (size_t)included_body, FIRSTSOCKET);
 
     if(result)
       failf(data, "Failed sending HTTP POST request");
     else
-      result =
-        Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE,
-                            &http->readbytecount,
-                            http->postdata?FIRSTSOCKET:-1,
-                            http->postdata?&http->writebytecount:NULL);
+      Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE,
+                          &http->readbytecount, http->postdata?FIRSTSOCKET:-1,
+                          http->postdata?&http->writebytecount:NULL);
     break;
 
   default:
@@ -2957,16 +2960,15 @@ CURLcode Curl_http(struct connectdata *conn, bool *done)
 
     /* issue the request */
     result = Curl_add_buffer_send(req_buffer, conn,
-                             &data->info.request_size, 0, FIRSTSOCKET);
+                                  &data->info.request_size, 0, FIRSTSOCKET);
 
     if(result)
       failf(data, "Failed sending HTTP request");
     else
       /* HTTP GET/HEAD download: */
-      result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE,
-                                   &http->readbytecount,
-                                   http->postdata?FIRSTSOCKET:-1,
-                                   http->postdata?&http->writebytecount:NULL);
+      Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, &http->readbytecount,
+                          http->postdata?FIRSTSOCKET:-1,
+                          http->postdata?&http->writebytecount:NULL);
   }
   if(result)
     return result;

lib/http.h

@@ -56,11 +56,10 @@ Curl_send_buffer *Curl_add_buffer_init(void);
 CURLcode Curl_add_bufferf(Curl_send_buffer *in, const char *fmt, ...);
 CURLcode Curl_add_buffer(Curl_send_buffer *in, const void *inptr, size_t size);
 CURLcode Curl_add_buffer_send(Curl_send_buffer *in,
-                         struct connectdata *conn,
-                         long *bytes_written,
-                         size_t included_body_bytes,
-                         int socketindex);
-
+                              struct connectdata *conn,
+                              long *bytes_written,
+                              size_t included_body_bytes,
+                              int socketindex);
 
 CURLcode Curl_add_timecondition(struct SessionHandle *data,
                                 Curl_send_buffer *buf);

lib/http_negotiate.c

@@ -305,9 +305,15 @@ CURLcode Curl_output_negotiate(struct connectdata *conn, bool proxy)
       infof(conn->data, "Make SPNEGO Initial Token failed\n");
     }
     else {
-      free(neg_ctx->output_token.value);
+      free(responseToken);
       responseToken = NULL;
+      free(neg_ctx->output_token.value);
       neg_ctx->output_token.value = malloc(spnegoTokenLength);
+      if(neg_ctx->output_token.value == NULL) {
+        free(spnegoToken);
+        spnegoToken = NULL;
+        return CURLE_OUT_OF_MEMORY;
+      }
       memcpy(neg_ctx->output_token.value, spnegoToken,spnegoTokenLength);
       neg_ctx->output_token.length = spnegoTokenLength;
       free(spnegoToken);

lib/http_ntlm.c

@@ -58,6 +58,7 @@
 #include "curl_base64.h"
 #include "http_ntlm.h"
 #include "url.h"
+#include "curl_gethostname.h"
 #include "curl_memory.h"
 
 #define _MPRINTF_REPLACE /* use our functions only */
@@ -116,6 +117,15 @@
 #define MD5_DIGEST_LENGTH 16
 #define MD4_DIGEST_LENGTH 16
 
+#elif defined(USE_NSS)
+
+#include "curl_md4.h"
+#include "nssg.h"
+#include <nss.h>
+#include <pk11pub.h>
+#include <hasht.h>
+#define MD5_DIGEST_LENGTH MD5_LENGTH
+
 #elif defined(USE_WINDOWS_SSPI)
 
 #include "curl_sspi.h"
@@ -250,6 +260,11 @@ CURLntlm Curl_input_ntlm(struct connectdata *conn,
   static const char type2_marker[] = { 0x02, 0x00, 0x00, 0x00 };
 #endif
 
+#ifdef USE_NSS
+  if(CURLE_OK != Curl_nss_force_init(conn->data))
+    return CURLNTLM_BAD;
+#endif
+
   ntlm = proxy?&conn->proxyntlm:&conn->ntlm;
 
   /* skip initial whitespaces */
@@ -351,16 +366,14 @@ static void setup_des_key(const unsigned char *key_56,
   DES_set_odd_parity(&key);
   DES_set_key(&key, ks);
 }
-#elif defined(USE_GNUTLS)
+
+#else /* defined(USE_SSLEAY) */
 
 /*
- * Turns a 56 bit key into the 64 bit, odd parity key and sets the key.
+ * Turns a 56 bit key into the 64 bit, odd parity key.  Used by GnuTLS and NSS.
  */
-static void setup_des_key(const unsigned char *key_56,
-                          gcry_cipher_hd_t *des)
+static void extend_key_56_to_64(const unsigned char *key_56, char *key)
 {
-  char key[8];
-
   key[0] = key_56[0];
   key[1] = (unsigned char)(((key_56[0] << 7) & 0xFF) | (key_56[1] >> 1));
   key[2] = (unsigned char)(((key_56[1] << 6) & 0xFF) | (key_56[2] >> 2));
@@ -369,10 +382,84 @@ static void setup_des_key(const unsigned char *key_56,
   key[5] = (unsigned char)(((key_56[4] << 3) & 0xFF) | (key_56[5] >> 5));
   key[6] = (unsigned char)(((key_56[5] << 2) & 0xFF) | (key_56[6] >> 6));
   key[7] = (unsigned char) ((key_56[6] << 1) & 0xFF);
+}
 
+#if defined(USE_GNUTLS)
+
+/*
+ * Turns a 56 bit key into the 64 bit, odd parity key and sets the key.
+ */
+static void setup_des_key(const unsigned char *key_56,
+                          gcry_cipher_hd_t *des)
+{
+  char key[8];
+  extend_key_56_to_64(key_56, key);
   gcry_cipher_setkey(*des, key, 8);
 }
-#endif
+
+#elif defined(USE_NSS)
+
+/*
+ * Expands a 56 bit key KEY_56 to 64 bit and encrypts 64 bit of data, using
+ * the expanded key.  The caller is responsible for giving 64 bit of valid
+ * data is IN and (at least) 64 bit large buffer as OUT.
+ */
+static bool encrypt_des(const unsigned char *in, unsigned char *out,
+                        const unsigned char *key_56)
+{
+  const CK_MECHANISM_TYPE mech = CKM_DES_ECB; /* DES cipher in ECB mode */
+  PK11SlotInfo *slot = NULL;
+  char key[8];                                /* expanded 64 bit key */
+  SECItem key_item;
+  PK11SymKey *symkey = NULL;
+  SECItem *param = NULL;
+  PK11Context *ctx = NULL;
+  int out_len;                                /* not used, required by NSS */
+  bool rv = FALSE;
+
+  /* use internal slot for DES encryption (requires NSS to be initialized) */
+  slot = PK11_GetInternalKeySlot();
+  if(!slot)
+    return FALSE;
+
+  /* expand the 56 bit key to 64 bit and wrap by NSS */
+  extend_key_56_to_64(key_56, key);
+  key_item.data = (unsigned char *)key;
+  key_item.len = /* hard-wired */ 8;
+  symkey = PK11_ImportSymKey(slot, mech, PK11_OriginUnwrap, CKA_ENCRYPT,
+                             &key_item, NULL);
+  if(!symkey)
+    goto fail;
+
+  /* create DES encryption context */
+  param = PK11_ParamFromIV(mech, /* no IV in ECB mode */ NULL);
+  if(!param)
+    goto fail;
+  ctx = PK11_CreateContextBySymKey(mech, CKA_ENCRYPT, symkey, param);
+  if(!ctx)
+    goto fail;
+
+  /* perform the encryption */
+  if(SECSuccess == PK11_CipherOp(ctx, out, &out_len, /* outbuflen */ 8,
+                                 (unsigned char *)in, /* inbuflen */ 8)
+      && SECSuccess == PK11_Finalize(ctx))
+    rv = /* all OK */ TRUE;
+
+fail:
+  /* cleanup */
+  if(ctx)
+    PK11_DestroyContext(ctx, PR_TRUE);
+  if(symkey)
+    PK11_FreeSymKey(symkey);
+  if(param)
+    SECITEM_FreeItem(param, PR_TRUE);
+  PK11_FreeSlot(slot);
+  return rv;
+}
+
+#endif /* defined(USE_NSS) */
+
+#endif /* defined(USE_SSLEAY) */
 
  /*
   * takes a 21 byte array and treats it as 3 56-bit DES keys. The
@@ -414,6 +501,10 @@ static void lm_resp(const unsigned char *keys,
   setup_des_key(keys+14, &des);
   gcry_cipher_encrypt(des, results+16, 8, plaintext, 8);
   gcry_cipher_close(des);
+#elif defined(USE_NSS)
+  encrypt_des(plaintext, results,    keys);
+  encrypt_des(plaintext, results+8,  keys+7);
+  encrypt_des(plaintext, results+16, keys+14);
 #endif
 }
 
@@ -470,11 +561,14 @@ static void mk_lm_hash(struct SessionHandle *data,
     setup_des_key(pw+7, &des);
     gcry_cipher_encrypt(des, lmbuffer+8, 8, magic, 8);
     gcry_cipher_close(des);
+#elif defined(USE_NSS)
+    encrypt_des(magic, lmbuffer,   pw);
+    encrypt_des(magic, lmbuffer+8, pw+7);
 #endif
 
     memset(lmbuffer + 16, 0, 21 - 16);
   }
-  }
+}
 
 #if USE_NTRESPONSES
 static void ascii_to_unicode_le(unsigned char *dest, const char *src,
@@ -525,6 +619,8 @@ static CURLcode mk_nt_hash(struct SessionHandle *data,
     gcry_md_write(MD4pw, pw, 2*len);
     memcpy (ntbuffer, gcry_md_read (MD4pw, 0), MD4_DIGEST_LENGTH);
     gcry_md_close(MD4pw);
+#elif defined(USE_NSS)
+    Curl_md4it(ntbuffer, pw, 2*len);
 #endif
 
     memset(ntbuffer + 16, 0, 21 - 16);
@@ -599,6 +695,11 @@ CURLcode Curl_output_ntlm(struct connectdata *conn,
   DEBUGASSERT(conn);
   DEBUGASSERT(conn->data);
 
+#ifdef USE_NSS
+  if(CURLE_OK != Curl_nss_force_init(conn->data))
+    return CURLE_OUT_OF_MEMORY;
+#endif
+
   if(proxy) {
     allocuserpwd = &conn->allocptr.proxyuserpwd;
     userp = conn->proxyuser;
@@ -894,7 +995,7 @@ CURLcode Curl_output_ntlm(struct connectdata *conn,
       user = userp;
     userlen = strlen(user);
 
-    if(gethostname(host, HOSTNAME_MAX)) {
+    if(Curl_gethostname(host, HOSTNAME_MAX)) {
       infof(conn->data, "gethostname() failed, continuing without!");
       hostlen = 0;
     }
@@ -926,6 +1027,11 @@ CURLcode Curl_output_ntlm(struct connectdata *conn,
       gcry_md_hd_t MD5pw;
       Curl_gtls_seed(conn->data); /* Initiate the seed if not already done */
       gcry_randomize(entropy, 8, GCRY_STRONG_RANDOM);
+#elif defined(USE_NSS)
+      PK11Context *MD5pw;
+      unsigned int outlen;
+      Curl_nss_seed(conn->data);  /* Initiate the seed if not already done */
+      PK11_GenerateRandom(entropy, 8);
 #endif
 
       /* 8 bytes random data as challenge in lmresp */
@@ -946,6 +1052,11 @@ CURLcode Curl_output_ntlm(struct connectdata *conn,
       gcry_md_write(MD5pw, tmp, MD5_DIGEST_LENGTH);
       memcpy(md5sum, gcry_md_read (MD5pw, 0), MD5_DIGEST_LENGTH);
       gcry_md_close(MD5pw);
+#elif defined(USE_NSS)
+      MD5pw = PK11_CreateDigestContext(SEC_OID_MD5);
+      PK11_DigestOp(MD5pw, tmp, 16);
+      PK11_DigestFinal(MD5pw, md5sum, &outlen, MD5_DIGEST_LENGTH);
+      PK11_DestroyContext(MD5pw, PR_TRUE);
 #endif
 
       /* We shall only use the first 8 bytes of md5sum,

lib/imap.c

@@ -436,12 +436,11 @@ static CURLcode imap_state_fetch_resp(struct connectdata *conn,
 
     if(!filesize)
       /* the entire data is already transfered! */
-      result=Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
+      Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
     else
       /* IMAP download */
-      result=Curl_setup_transfer(conn, FIRSTSOCKET, filesize, FALSE,
-                                 imap->bytecountp,
-                                 -1, NULL); /* no upload here */
+      Curl_setup_transfer(conn, FIRSTSOCKET, filesize, FALSE,
+                          imap->bytecountp, -1, NULL); /* no upload here */
 
     data->req.maxdownload = filesize;
   }
@@ -924,15 +923,14 @@ static CURLcode imap_parse_url_path(struct connectdata *conn)
 static CURLcode imap_dophase_done(struct connectdata *conn,
                                   bool connected)
 {
-  CURLcode result = CURLE_OK;
   struct FTP *imap = conn->data->state.proto.imap;
   (void)connected;
 
   if(imap->transfer != FTPTRANSFER_BODY)
     /* no data to transfer */
-    result=Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
+    Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
 
-  return result;
+  return CURLE_OK;
 }
 
 /* called from multi.c while DOing */

lib/inet_pton.c

@@ -159,7 +159,7 @@ inet_pton6(const char *src, unsigned char *dst)
   unsigned char tmp[IN6ADDRSZ], *tp, *endp, *colonp;
   const char *xdigits, *curtok;
   int ch, saw_xdigit;
-  unsigned int val;
+  size_t val;
 
   memset((tp = tmp), 0, IN6ADDRSZ);
   endp = tp + IN6ADDRSZ;
@@ -218,8 +218,8 @@ inet_pton6(const char *src, unsigned char *dst)
      * Since some memmove()'s erroneously fail to handle
      * overlapping regions, we'll do the shift by hand.
      */
-    const long n = tp - colonp;
-    long i;
+    const size_t n = tp - colonp;
+    size_t i;
 
     if(tp == endp)
       return (0);

lib/krb4.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2006, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -51,14 +51,11 @@ int Curl_sec_fflush_fd(struct connectdata *conn, int fd);
 int Curl_sec_fprintf (struct connectdata *, FILE *, const char *, ...);
 int Curl_sec_getc (struct connectdata *conn, FILE *);
 int Curl_sec_putc (struct connectdata *conn, int, FILE *);
-int Curl_sec_read (struct connectdata *conn, int, void *, int);
 int Curl_sec_read_msg (struct connectdata *conn, char *, int);
 
 int Curl_sec_vfprintf(struct connectdata *, FILE *, const char *, va_list);
 int Curl_sec_fprintf2(struct connectdata *conn, FILE *f, const char *fmt, ...);
 int Curl_sec_vfprintf2(struct connectdata *conn, FILE *, const char *, va_list);
-ssize_t Curl_sec_send(struct connectdata *conn, int, const char *, int);
-int Curl_sec_write(struct connectdata *conn, int, const char *, int);
 
 void Curl_sec_end (struct connectdata *);
 int Curl_sec_login (struct connectdata *);

lib/krb5.c

@@ -1,6 +1,6 @@
 /* GSSAPI/krb5 support for FTP - loosely based on old krb4.c
  *
- * Copyright (c) 1995, 1996, 1997, 1998, 1999 Kungliga Tekniska H<>gskolan
+ * Copyright (c) 1995, 1996, 1997, 1998, 1999, 2010 Kungliga Tekniska H<>gskolan
  * (Royal Institute of Technology, Stockholm, Sweden).
  * Copyright (c) 2004 - 2009 Daniel Stenberg
  * All rights reserved.
@@ -163,7 +163,7 @@ krb5_auth(void *app_data, struct connectdata *conn)
 {
   int ret;
   char *p;
-  const char *host = conn->dns_entry->addr->ai_canonname;
+  const char *host = conn->host.name;
   ssize_t nread;
   curl_socklen_t l = sizeof(conn->local_addr);
   struct SessionHandle *data = conn->data;

lib/ldap.c

@@ -5,7 +5,7 @@
  *                | (__| |_| |  _ <| |___
  *                 \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -22,7 +22,19 @@
 
 #include "setup.h"
 
-#ifndef CURL_DISABLE_LDAP
+#if !defined(CURL_DISABLE_LDAP) && !defined(USE_OPENLDAP)
+
+/*
+ * Notice that USE_OPENLDAP is only a source code selection switch. When
+ * libcurl is built with USE_OPENLDAP defined the libcurl source code that
+ * gets compiled is the code from openldap.c, otherwise the code that gets
+ * compiled is the code from ldap.c.
+ *
+ * When USE_OPENLDAP is defined a recent version of the OpenLDAP library
+ * might be required for compilation and runtime. In order to use ancient
+ * OpenLDAP library versions, USE_OPENLDAP shall not be defined.
+ */
+
 /* -- WIN32 approved -- */
 #include <stdio.h>
 #include <string.h>
@@ -31,15 +43,7 @@
 #include <ctype.h>
 #include <errno.h>
 
-#ifdef CURL_LDAP_HYBRID         /* If W$ definitions are needed. */
-# include <windows.h>
-  /* Remember we are NOT in a W$ compiler! */
-# undef WIN32
-# undef _WIN32
-# undef __WIN32__
-#endif
-
-#ifdef CURL_LDAP_WIN            /* Use W$ LDAP implementation. */
+#ifdef CURL_LDAP_WIN            /* Use Windows LDAP implementation. */
 # include <winldap.h>
 # ifndef LDAP_VENDOR_NAME
 #  error Your Platform SDK is NOT sufficient for LDAP support! Update your Platform SDK, or disable LDAP support!
@@ -47,14 +51,14 @@
 #  include <winber.h>
 # endif
 #else
-#define LDAP_DEPRECATED 1       /* Be sure ldap_init() is defined. */
-#ifdef HAVE_LBER_H
-# include <lber.h>
-#endif
+# define LDAP_DEPRECATED 1      /* Be sure ldap_init() is defined. */
+# ifdef HAVE_LBER_H
+#  include <lber.h>
+# endif
 # include <ldap.h>
-#if (defined(HAVE_LDAP_SSL) && defined(HAVE_LDAP_SSL_H))
-# include <ldap_ssl.h>
-#endif /* HAVE_LDAP_SSL && HAVE_LDAP_SSL_H */
+# if (defined(HAVE_LDAP_SSL) && defined(HAVE_LDAP_SSL_H))
+#  include <ldap_ssl.h>
+# endif /* HAVE_LDAP_SSL && HAVE_LDAP_SSL_H */
 #endif
 
 #ifdef HAVE_UNISTD_H
@@ -715,4 +719,4 @@ static void _ldap_free_urldesc (LDAPURLDesc *ludp)
   free (ludp);
 }
 #endif  /* !HAVE_LDAP_URL_PARSE */
-#endif  /* CURL_DISABLE_LDAP */
+#endif  /* !CURL_DISABLE_LDAP && !USE_OPENLDAP */

lib/llist.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -31,8 +31,8 @@
 /* this must be the last include file */
 #include "memdebug.h"
 
-void
-Curl_llist_init(struct curl_llist *l, curl_llist_dtor dtor)
+static void
+llist_init(struct curl_llist *l, curl_llist_dtor dtor)
 {
   l->size = 0;
   l->dtor = dtor;
@@ -49,7 +49,7 @@ Curl_llist_alloc(curl_llist_dtor dtor)
   if(NULL == list)
     return NULL;
 
-  Curl_llist_init(list, dtor);
+  llist_init(list, dtor);
 
   return list;
 }

lib/llist.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2008, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -43,16 +43,11 @@ struct curl_llist {
   size_t size;
 };
 
-void Curl_llist_init(struct curl_llist *, curl_llist_dtor);
 struct curl_llist *Curl_llist_alloc(curl_llist_dtor);
 int Curl_llist_insert_next(struct curl_llist *, struct curl_llist_element *,
                            const void *);
-int Curl_llist_insert_prev(struct curl_llist *, struct curl_llist_element *,
-                           const void *);
 int Curl_llist_remove(struct curl_llist *, struct curl_llist_element *,
                       void *);
-int Curl_llist_remove_next(struct curl_llist *, struct curl_llist_element *,
-                           void *);
 size_t Curl_llist_count(struct curl_llist *);
 void Curl_llist_destroy(struct curl_llist *, void *);
 int Curl_llist_move(struct curl_llist *, struct curl_llist_element *,

lib/makefile.amiga

@@ -1,5 +1,5 @@
 #
-# $VER: LibcURL Makefile for AmigaOS ...
+# libcurl Makefile for AmigaOS ...
 #
 
 # change the follow to where you have the AmiTCP SDK v4.3 includes:
@@ -10,23 +10,12 @@ ATCPSDKI=	/GG/netinclude
 CC	=	m68k-amigaos-gcc
 CFLAGS	=	-I$(ATCPSDKI) -m68020-60 -O2 -msoft-float -noixemul -g -I. -I../include -W -Wall
 
-OBJS = amigaos.c \
-  file.c timeval.c base64.c hostip.c progress.c formdata.c	\
-  cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c	\
-  ldap.c ssluse.c version.c getenv.c escape.c mprintf.c telnet.c	\
-  netrc.c getinfo.c transfer.c strequal.c easy.c security.c krb4.c	\
-  krb5.c memdebug.c http_chunks.c strtok.c connect.c llist.c hash.c	\
-  multi.c content_encoding.c share.c http_digest.c md5.c curl_rand.c	\
-  http_negotiate.c http_ntlm.c inet_pton.c strtoofft.c strerror.c	\
-  hostares.c hostasyn.c hostip4.c hostip6.c hostsyn.c hostthre.c	\
-  inet_ntop.c parsedate.c select.c gtls.c sslgen.c tftp.c splay.c	\
-  strdup.c socks.c ssh.c nss.c qssl.c rawstr.c curl_addrinfo.c          \
-  socks_gssapi.c socks_sspi.c curl_sspi.c slist.c nonblock.c		\
-  curl_memrchr.c imap.c pop3.c smtp.c pingpong.c rtsp.c curl_threads.c	\
-  warnless.c
+include Makefile.inc
+CSOURCES += amigaos.c
+OBJS = $(CSOURCES:.c=.o)
 
-all:	$(OBJS:.c=.o)
-	ar cru libcurl.a $(OBJS:.c=.o)
+all:	$(OBJS)
+	ar cru libcurl.a $(OBJS)
 	ranlib libcurl.a
 
 install:

lib/md4.c

@@ -0,0 +1,281 @@
+/*-
+   Copyright (C) 1990-2, RSA Data Security, Inc. All rights reserved.
+
+   License to copy and use this software is granted provided that it
+   is identified as the "RSA Data Security, Inc. MD4 Message-Digest
+   Algorithm" in all material mentioning or referencing this software
+   or this function.
+
+   License is also granted to make and use derivative works provided
+   that such works are identified as "derived from the RSA Data
+   Security, Inc. MD4 Message-Digest Algorithm" in all material
+   mentioning or referencing the derived work.
+
+   RSA Data Security, Inc. makes no representations concerning either
+   the merchantability of this software or the suitability of this
+   software for any particular purpose. It is provided "as is"
+   without express or implied warranty of any kind.
+
+   These notices must be retained in any copies of any part of this
+   documentation and/or software.
+ */
+
+#include "setup.h"
+
+/* NSS crypto library does not provide the MD4 hash algorithm, so that we have
+ * a local implementation of it */
+#ifdef USE_NSS
+
+#include "curl_md4.h"
+#include <string.h>
+
+typedef unsigned int UINT4;
+
+typedef struct MD4Context {
+  UINT4 state[4];               /* state (ABCD) */
+  UINT4 count[2];               /* number of bits, modulo 2^64 (lsb first) */
+  unsigned char buffer[64];     /* input buffer */
+} MD4_CTX;
+
+/* Constants for MD4Transform routine.
+ */
+#define S11 3
+#define S12 7
+#define S13 11
+#define S14 19
+#define S21 3
+#define S22 5
+#define S23 9
+#define S24 13
+#define S31 3
+#define S32 9
+#define S33 11
+#define S34 15
+
+static void MD4Transform(UINT4 [4], const unsigned char [64]);
+static void Encode(unsigned char *, UINT4 *, unsigned int);
+static void Decode(UINT4 *, const unsigned char *, unsigned int);
+
+static unsigned char PADDING[64] = {
+  0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* F, G and H are basic MD4 functions.
+ */
+#define F(x, y, z) (((x) & (y)) | ((~x) & (z)))
+#define G(x, y, z) (((x) & (y)) | ((x) & (z)) | ((y) & (z)))
+#define H(x, y, z) ((x) ^ (y) ^ (z))
+
+/* ROTATE_LEFT rotates x left n bits.
+ */
+#define ROTATE_LEFT(x, n) (((x) << (n)) | ((x) >> (32-(n))))
+
+/* FF, GG and HH are transformations for rounds 1, 2 and 3 */
+/* Rotation is separate from addition to prevent recomputation */
+#define FF(a, b, c, d, x, s) { \
+    (a) += F ((b), (c), (d)) + (x); \
+    (a) = ROTATE_LEFT ((a), (s)); \
+  }
+#define GG(a, b, c, d, x, s) { \
+    (a) += G ((b), (c), (d)) + (x) + (UINT4)0x5a827999; \
+    (a) = ROTATE_LEFT ((a), (s)); \
+  }
+#define HH(a, b, c, d, x, s) { \
+    (a) += H ((b), (c), (d)) + (x) + (UINT4)0x6ed9eba1; \
+    (a) = ROTATE_LEFT ((a), (s)); \
+  }
+
+/* MD4 initialization. Begins an MD4 operation, writing a new context.
+ */
+static void MD4Init(MD4_CTX *context)
+{
+  context->count[0] = context->count[1] = 0;
+
+  /* Load magic initialization constants.
+   */
+  context->state[0] = 0x67452301;
+  context->state[1] = 0xefcdab89;
+  context->state[2] = 0x98badcfe;
+  context->state[3] = 0x10325476;
+}
+
+/* MD4 block update operation. Continues an MD4 message-digest
+     operation, processing another message block, and updating the
+     context.
+ */
+static void MD4Update(MD4_CTX *context, const unsigned char *input,
+                      unsigned int inputLen)
+{
+  unsigned int i, bufindex, partLen;
+
+  /* Compute number of bytes mod 64 */
+  bufindex = (unsigned int)((context->count[0] >> 3) & 0x3F);
+  /* Update number of bits */
+  if ((context->count[0] += ((UINT4)inputLen << 3))
+      < ((UINT4)inputLen << 3))
+    context->count[1]++;
+  context->count[1] += ((UINT4)inputLen >> 29);
+
+  partLen = 64 - bufindex;
+  /* Transform as many times as possible.
+   */
+  if (inputLen >= partLen) {
+    memcpy(&context->buffer[bufindex], input, partLen);
+    MD4Transform (context->state, context->buffer);
+
+    for (i = partLen; i + 63 < inputLen; i += 64)
+      MD4Transform (context->state, &input[i]);
+
+    bufindex = 0;
+  }
+  else
+    i = 0;
+
+  /* Buffer remaining input */
+  memcpy(&context->buffer[bufindex], &input[i], inputLen-i);
+}
+
+/* MD4 padding. */
+static void MD4Pad(MD4_CTX *context)
+{
+  unsigned char bits[8];
+  unsigned int bufindex, padLen;
+
+  /* Save number of bits */
+  Encode (bits, context->count, 8);
+
+  /* Pad out to 56 mod 64.
+   */
+  bufindex = (unsigned int)((context->count[0] >> 3) & 0x3f);
+  padLen = (bufindex < 56) ? (56 - bufindex) : (120 - bufindex);
+  MD4Update (context, PADDING, padLen);
+
+  /* Append length (before padding) */
+  MD4Update (context, bits, 8);
+}
+
+/* MD4 finalization. Ends an MD4 message-digest operation, writing the
+     the message digest and zeroizing the context.
+ */
+static void MD4Final (unsigned char digest[16], MD4_CTX *context)
+{
+  /* Do padding */
+  MD4Pad (context);
+
+  /* Store state in digest */
+  Encode (digest, context->state, 16);
+
+  /* Zeroize sensitive information.
+   */
+  memset(context, 0, sizeof(*context));
+}
+
+/* MD4 basic transformation. Transforms state based on block.
+ */
+static void MD4Transform (UINT4 state[4], const unsigned char block[64])
+{
+  UINT4 a = state[0], b = state[1], c = state[2], d = state[3], x[16];
+
+  Decode (x, block, 64);
+
+  /* Round 1 */
+  FF (a, b, c, d, x[ 0], S11); /* 1 */
+  FF (d, a, b, c, x[ 1], S12); /* 2 */
+  FF (c, d, a, b, x[ 2], S13); /* 3 */
+  FF (b, c, d, a, x[ 3], S14); /* 4 */
+  FF (a, b, c, d, x[ 4], S11); /* 5 */
+  FF (d, a, b, c, x[ 5], S12); /* 6 */
+  FF (c, d, a, b, x[ 6], S13); /* 7 */
+  FF (b, c, d, a, x[ 7], S14); /* 8 */
+  FF (a, b, c, d, x[ 8], S11); /* 9 */
+  FF (d, a, b, c, x[ 9], S12); /* 10 */
+  FF (c, d, a, b, x[10], S13); /* 11 */
+  FF (b, c, d, a, x[11], S14); /* 12 */
+  FF (a, b, c, d, x[12], S11); /* 13 */
+  FF (d, a, b, c, x[13], S12); /* 14 */
+  FF (c, d, a, b, x[14], S13); /* 15 */
+  FF (b, c, d, a, x[15], S14); /* 16 */
+
+  /* Round 2 */
+  GG (a, b, c, d, x[ 0], S21); /* 17 */
+  GG (d, a, b, c, x[ 4], S22); /* 18 */
+  GG (c, d, a, b, x[ 8], S23); /* 19 */
+  GG (b, c, d, a, x[12], S24); /* 20 */
+  GG (a, b, c, d, x[ 1], S21); /* 21 */
+  GG (d, a, b, c, x[ 5], S22); /* 22 */
+  GG (c, d, a, b, x[ 9], S23); /* 23 */
+  GG (b, c, d, a, x[13], S24); /* 24 */
+  GG (a, b, c, d, x[ 2], S21); /* 25 */
+  GG (d, a, b, c, x[ 6], S22); /* 26 */
+  GG (c, d, a, b, x[10], S23); /* 27 */
+  GG (b, c, d, a, x[14], S24); /* 28 */
+  GG (a, b, c, d, x[ 3], S21); /* 29 */
+  GG (d, a, b, c, x[ 7], S22); /* 30 */
+  GG (c, d, a, b, x[11], S23); /* 31 */
+  GG (b, c, d, a, x[15], S24); /* 32 */
+
+  /* Round 3 */
+  HH (a, b, c, d, x[ 0], S31); /* 33 */
+  HH (d, a, b, c, x[ 8], S32); /* 34 */
+  HH (c, d, a, b, x[ 4], S33); /* 35 */
+  HH (b, c, d, a, x[12], S34); /* 36 */
+  HH (a, b, c, d, x[ 2], S31); /* 37 */
+  HH (d, a, b, c, x[10], S32); /* 38 */
+  HH (c, d, a, b, x[ 6], S33); /* 39 */
+  HH (b, c, d, a, x[14], S34); /* 40 */
+  HH (a, b, c, d, x[ 1], S31); /* 41 */
+  HH (d, a, b, c, x[ 9], S32); /* 42 */
+  HH (c, d, a, b, x[ 5], S33); /* 43 */
+  HH (b, c, d, a, x[13], S34); /* 44 */
+  HH (a, b, c, d, x[ 3], S31); /* 45 */
+  HH (d, a, b, c, x[11], S32); /* 46 */
+  HH (c, d, a, b, x[ 7], S33); /* 47 */
+  HH (b, c, d, a, x[15], S34); /* 48 */
+
+  state[0] += a;
+  state[1] += b;
+  state[2] += c;
+  state[3] += d;
+
+  /* Zeroize sensitive information.
+   */
+  memset(x, 0, sizeof(x));
+}
+
+/* Encodes input (UINT4) into output (unsigned char). Assumes len is
+     a multiple of 4.
+ */
+static void Encode(unsigned char *output, UINT4 *input, unsigned int len)
+{
+  unsigned int i, j;
+
+  for (i = 0, j = 0; j < len; i++, j += 4) {
+    output[j] = (unsigned char)(input[i] & 0xff);
+    output[j+1] = (unsigned char)((input[i] >> 8) & 0xff);
+    output[j+2] = (unsigned char)((input[i] >> 16) & 0xff);
+    output[j+3] = (unsigned char)((input[i] >> 24) & 0xff);
+  }
+}
+
+/* Decodes input (unsigned char) into output (UINT4). Assumes len is
+     a multiple of 4.
+ */
+static void Decode (UINT4 *output, const unsigned char *input, unsigned int len)
+{
+  unsigned int i, j;
+
+  for (i = 0, j = 0; j < len; i++, j += 4)
+    output[i] = ((UINT4)input[j]) | (((UINT4)input[j+1]) << 8) |
+      (((UINT4)input[j+2]) << 16) | (((UINT4)input[j+3]) << 24);
+}
+
+void Curl_md4it(unsigned char *output, const unsigned char *input, size_t len)
+{
+  MD4_CTX ctx;
+  MD4Init(&ctx);
+  MD4Update(&ctx, input, (unsigned int)len);
+  MD4Final(output, &ctx);
+}
+#endif /* USE_NSS */