spell and 7.20.0

to automatically uncompress it with the CURLOPT_ENCODING option, libcurl
  could wrongly provide the callback with more data than what the maximum
  documented amount. An application could thus get tricked into badness if the
  maximum limit was trusted to be enforced by libcurl itself (as it is
  documented).

  This is further detailed and explained in the libcurl security advisory
  20100209 at

    http://curl.haxx.se/docs/adv_20100209.html

CHANGES

@@ -6,6 +6,431 @@
 
                                   Changelog
 
+Version 7.20.0 (9 February 2010)
+
+Daniel Stenberg (9 Feb 2010)
+- When downloading compressed content over HTTP and the app asked libcurl to
+  automatically uncompress it with the CURLOPT_ENCODING option, libcurl could
+  wrongly provide the callback with more data than the maximum documented
+  amount. An application could thus get tricked into badness if the maximum
+  limit was trusted to be enforced by libcurl itself (as it is documented).
+
+  This is further detailed and explained in the libcurl security advisory
+  20100209 at
+
+    http://curl.haxx.se/docs/adv_20100209.html
+
+Daniel Fandrich (3 Feb 2010)
+- Changed the Watcom makefiles to make them easier to keep in sync with
+  Makefile.inc since that can't be included directly.
+
+Yang Tse (2 Feb 2010)
+- Symbol CURL_FORMAT_OFF_T now obsoleted, will be removed in a future release,
+  symbol will not be available when building with CURL_NO_OLDIES defined. Use
+  of CURL_FORMAT_CURL_OFF_T is preferred since 7.19.0
+
+Daniel Stenberg (1 Feb 2010)
+- Using the multi_socket API, it turns out at times it seemed to "forget"
+  connections (which caused a hang). It turned out to be an existing (7.19.7)
+  bug in libcurl (that's been around for a long time) and it happened like
+  this:
+
+  The app calls curl_multi_add_handle() to add a new easy handle, libcurl will
+  then set it to timeout in 1 millisecond so libcurl will tell the app about
+  it.
+
+  The app's timeout fires off that there's a timeout, the app calls libcurl as
+  we so often document it:
+
+  do {
+   res = curl_multi_socket_action(... TIMEOUT ...);
+  } while(CURLM_CALL_MULTI_PERFORM == res);
+
+  And this is the problem number one:
+
+  When curl_multi_socket_action() is called with no specific handle, but only
+  a timeout-action, it will *only* perform actions within libcurl that are
+  marked to run at this time. In this case, the request would go from INIT to
+  CONNECT and return CURLM_CALL_MULTI_PERFORM. When the app then calls libcurl
+  again, there's no timer set for this handle so it remains in the CONNECT
+  state. The CONNECT state is a transitional state in libcurl so it reports no
+  sockets there, and thus libcurl never tells the app anything more about that
+  easy handle/connection.
+
+  libcurl _does_ set a 1ms timeout for the handle at the end of
+  multi_runsingle() if it returns CURLM_CALL_MULTI_PERFORM, but since the loop
+  is instant the new job is not ready to run at that point (and there's no
+  code that makes libcurl call the app to update the timout for this new
+  timeout). It will simply rely on that some other timeout will trigger later
+  on or that something else will update the timeout callback. This makes the
+  bug fairly hard to repeat.
+
+  The fix made to adress this issue:
+
+  We introduce a loop in lib/multi.c around all calls to multi_runsingle() and
+  simply check for CURLM_CALL_MULTI_PERFORM internally. This has the added
+  benefit that this goes in line with my long-term wishes to get rid of the
+  CURLM_CALL_MULTI_PERFORM all together from the public API.
+
+  The downside of this fix, is that the counter we return in 'running_handles'
+  in several of our public functions then gets a slightly new and possibly
+  confusing behavior during times:
+
+  If an app adds a handle that fails to connect (very quickly) it may just
+  as well never appear as a 'running_handle' with this fix. Previously it
+  would first bump the counter only to get it decreased again at next call.
+  Even I have used that change in handle counter to signal "end of a
+  transfer". The only *good* way to find the end of a individual transfer
+  is calling curl_multi_info_read() to see if it returns one.
+
+  Of course, if the app previously did the looping before it checked the
+  counter, it really shouldn't be any new effect.
+
+Yang Tse (26 Jan 2010)
+- Constantine Sapuntzakis' and Joshua Kwan's work done in the last four months
+  relative to the asynchronous DNS lookups, along with with some integration
+  adjustments I have done are finally committed to CVS.
+
+  Currently these enhancements will benefit builds done using c-ares on any
+  platform as well as Windows builds using the default threaded resolver.
+
+  This release does not make generally available POSIX threaded DNS lookups
+  yet. There is no configure option to enable this feature yet. It is possible
+  to experimantally try this feature running configure with compiler flags that
+  make simultaneous definition of preprocessor symbols USE_THREADS_POSIX and
+  HAVE_PTHREAD_H, as well as whatever reentrancy compiler flags and linker ones
+  are required to link and properly use pthread_* functions on each platform.
+
+Daniel Stenberg (26 Jan 2010)
+- Mike Crowe made libcurl return CURLE_COULDNT_RESOLVE_PROXY when it is the
+  proxy that cannot be resolved when using c-ares. This matches the behaviour
+  when not using c-ares.
+
+Bj<EFBFBD>rn Stenberg (23 Jan 2010)
+- Added a new flag: -J/--remote-header-name. This option tells the
+  -O/--remote-name option to use the server-specified Content-Disposition
+  filename instead of extracting a filename from the URL.
+
+Daniel Stenberg (21 Jan 2010)
+- Chris Conroy brought support for RTSP transfers, and with it comes 8(!) new
+  libcurl options for controlling what to get and how to receive posssibly
+  interleaved RTP data.
+
+Daniel Stenberg (20 Jan 2010)
+- As was pointed out on the http-state mailing list, the order of cookies in a
+  HTTP Cookie: header _needs_ to be sorted on the path length in the cases
+  where two cookies using the same name are set more than once using
+  (overlapping) paths. Realizing this, identically named cookies must be
+  sorted correctly. But detecting only identically named cookies and take care
+  of them individually is harder than just to blindly and unconditionally sort
+  all cookies based on their path lengths. All major browsers also already do
+  this, so this makes our behavior one step closer to them in the cookie area.
+
+  Test case 8 was the only one that broke due to this change and I updated it
+  accordingly.
+
+Daniel Stenberg (19 Jan 2010)
+- David McCreedy brought a fix and a new test case (129) to make libcurl work
+  again when downloading files over FTP using ASCII and it turns out that the
+  final size of the file is not the same as the initial size the server
+  reported. This is very common since servers don't take the newline
+  conversions into account.
+
+Kamil Dudka (14 Jan 2010)
+- Suppressed side effect of OpenSSL configure checks, which prevented NSS from
+  being properly detected under certain circumstances. It had been caused by
+  strange behavior of pkg-config when handling PKG_CONFIG_LIBDIR. pkg-config
+  distinguishes among empty and non-existent environment variable in that case.
+
+Daniel Stenberg (12 Jan 2010)
+- Gil Weber reported a peculiar flaw with the multi interface when doing SFTP
+  transfers: curl_multi_fdset() would return -1 and not set and file
+  descriptors several times during a transfer of a single file. It turned out
+  to be due to two different flaws now fixed. Gil's excellent recipe helped me
+  nail this.
+
+Daniel Stenberg (11 Jan 2010)
+- Made sure that the progress callback is repeatedly called at a regular
+  interval even during very slow connects.
+
+- The tests/runtests.pl script now checks to see if the test case that runs is
+  present in the tests/data/Makefile.am and outputs a notice message on the
+  screen if not. Each test file has to be included in that Makefile.am to get
+  included in release archives and forgetting to add files there is a common
+  mistake. This is an attempt to make it harder to forget.
+
+Daniel Stenberg (9 Jan 2010)
+- Johan van Selst found and fixed a OpenSSL session ref count leak:
+
+  ossl_connect_step3() increments an SSL session handle reference counter on
+  each call. When sessions are re-used this reference counter may be
+  incremented many times, but it will be decremented only once when done (by
+  Curl_ossl_session_free()); and the internal OpenSSL data will not be freed
+  if this reference count remains positive. When a session is re-used the
+  reference counter should be corrected by explicitly calling
+  SSL_SESSION_free() after each consecutive SSL_get1_session() to avoid
+  introducing a memory leak.
+
+  (http://curl.haxx.se/bug/view.cgi?id=2926284)
+
+Daniel Stenberg (7 Jan 2010)
+- Make sure the progress callback is called repeatedly even during very slow
+  name resolves when c-ares is used for resolving.
+
+Claes Jakobsson (6 Jan 2010)
+- Julien Chaffraix fixed so that the fragment part in an URL is not sent
+  to the server anymore.
+
+Kamil Dudka (3 Jan 2010)
+- Julien Chaffraix eliminated a duplicated initialization in singlesocket().
+
+Daniel Stenberg (2 Jan 2010)
+- Make curl support --ssl and --ssl-reqd instead of the previous FTP-specific
+  versions --ftp-ssl and --ftp-ssl-reqd as these options are now used to
+  control SSL/TLS for IMAP, POP3 and SMTP as well in addition to FTP. The old
+  option names are still working but the new ones are the ones listed and
+  documented.
+
+Daniel Stenberg (1 Jan 2010)
+- Ingmar Runge enhanced libcurl's FTP engine to support the PRET command. This
+  command is a special "hack" used by the drftpd server, but even though it is
+  a custom extension I've deemed it fine to add to libcurl since this server
+  seems to survive and people keep using it and want libcurl to support
+  it. The new libcurl option is named CURLOPT_FTP_USE_PRET, and it is also
+  usable from the curl tool with --ftp-pret. Using this option on a server
+  that doesn't support this command will make libcurl fail.
+
+  I added test cases 1107 and 1108 to verify the functionality.
+
+  The PRET command is documented at
+  http://www.drftpd.org/index.php/Distributed_PASV
+
+Yang Tse (30 Dec 2009)
+- Steven M. Schweda improved VMS build system, and Craig A. Berry helped
+  with the patch and testing.
+
+Daniel Stenberg (26 Dec 2009)
+- Renato Botelho and Peter Pentchev brought a patch that makes the libcurl
+  headers work correctly even on FreeBSD systems before v8.
+
+  (http://curl.haxx.se/bug/view.cgi?id=2916915)
+
+Daniel Stenberg (17 Dec 2009)
+- David Byron fixed Curl_ossl_cleanup to actually call ENGINE_cleanup when
+  available.
+  
+- Follow-up fix for the proxy fix I did for Jon Nelson's bug. It turned out I
+  was a bit too quick and broke test case 1101 with that change. The order of
+  some of the setups is sensitive. I now changed it slightly again to make
+  sure we do them in this order:
+
+  1 - parse URL and figure out what protocol is used in the URL
+  2 - prepend protocol:// to URL if missing
+  3 - parse name+password off URL, which needs to know what protocol is used
+      (since only some allows for name+password in the URL)
+  4 - figure out if a proxy should be used set by an option
+  5 - if no proxy option, check proxy environment variables
+  6 - run the protocol-specific setup function, which needs to have the proxy
+      already set
+
+Daniel Stenberg (15 Dec 2009)
+- Jon Nelson found a regression that turned out to be a flaw in how libcurl
+  detects and uses proxies based on the environment variables. If the proxy
+  was given as an explicit option it worked, but due to the setup order
+  mistake proxies would not be used fine for a few protocols when picked up
+  from '[protocol]_proxy'. Obviously this broke after 7.19.4. I now also added
+  test case 1106 that verifies this functionality.
+
+  (http://curl.haxx.se/bug/view.cgi?id=2913886)
+
+Daniel Stenberg (12 Dec 2009)
+- IMAP, POP3 and SMTP support and their TLS versions (including IMAPS, POP3S
+  and SMTPS) are now supported. The current state may not yet be solid, but
+  the foundation is in place and the test suite has some initial support for
+  these protocols. Work will now persue to make them nice libcurl citizens
+  until release.
+
+  The work with supporting these new protocols was sponsored by
+  networking4all.com - thanks!
+
+Daniel Stenberg (10 Dec 2009)
+- Siegfried Gyuricsko found out that the curl manual said --retry would retry
+  on FTP errors in the transient 5xx range. Transient FTP errors are in the
+  4xx range. The code itself only tried on 5xx errors that occured _at login_.
+  Now the retry code retries on all FTP transfer failures that ended with a
+  4xx response.
+
+  (http://curl.haxx.se/bug/view.cgi?id=2911279)
+
+- Constantine Sapuntzakis figured out a case which would lead to libcurl
+  accessing alredy freed memory and thus crash when using HTTPS (with
+  OpenSSL), multi interface and the CURLOPT_DEBUGFUNCTION and a certain order
+  of cleaning things up. I fixed it.
+
+  (http://curl.haxx.se/bug/view.cgi?id=2905220)
+
+Daniel Stenberg (7 Dec 2009)
+- Martin Storsjo made libcurl use the Expect: 100-continue header for posts
+  with unknown size. Previously it was only used for posts with a known size
+  larger than 1024 bytes.
+
+Daniel Stenberg (1 Dec 2009)
+- If the Expect: 100-continue header has been set by the application through
+  curl_easy_setopt with CURLOPT_HTTPHEADER, the library should set
+  data->state.expect100header accordingly - the current code (in 7.19.7 at
+  least) doesn't handle this properly. Martin Storsjo provided the fix!
+
+Yang Tse (28 Nov 2009)
+- Added Diffie-Hellman parameters to several test harness certificate files in
+  PEM format. Required by several stunnel versions used by our test harness.
+
+Daniel Stenberg (28 Nov 2009)
+- Markus Koetter provided a polished and updated version of Chad Monroe's TFTP
+  rework patch that now integrates TFTP properly into libcurl so that it can
+  be used non-blocking with the multi interface and more. BLKSIZE also works.
+
+  The --tftp-blksize option was added to allow setting the TFTP BLKSIZE from
+  the command line.
+
+Daniel Stenberg (26 Nov 2009)
+- Extended and fixed the change I did on Dec 11 for the the progress
+  meter/callback during FTP command/response sequences. It turned out it was
+  really lame before and now the progress meter SHOULD get called at least
+  once per second.
+
+Daniel Stenberg (23 Nov 2009)
+- Bjorn Augustsson reported a bug which made curl not report any problems even
+  though it failed to write a very small download to disk (done in a single
+  fwrite call). It turned out to be because fwrite() returned success, but
+  there was insufficient error-checking for the fclose() call which tricked
+  curl to believe things were fine.
+
+Yang Tse (23 Nov 2009)
+- David Byron modified Makefile.dist vc8 and vc9 targets in order to allow
+  finer granularity control when generating src and lib makefiles.
+
+Yang Tse (22 Nov 2009)
+- I modified configure to force removal of the curlbuild.h file included in
+  distribution tarballs for use by non-configure systems. As intended, this
+  would get overwriten when doing in-tree builds. But VPATH builds would end
+  having two curlbuild.h files, one in the source tree and another in the
+  build tree. With the modification I introduced 5 Nov 2009 this could become
+  an issue when running libcurl's test suite.
+
+Daniel Stenberg (20 Nov 2009)
+- Constantine Sapuntzakis identified a write after close, as the sockets were
+  closed by libcurl before the SSL lib were shutdown and they may write to its
+  socket. Detected to at least happen with OpenSSL builds.
+
+- Jad Chamcham pointed out a bug with connection re-use. If a connection had
+  CURLOPT_HTTPPROXYTUNNEL enabled over a proxy, a subsequent request using the
+  same proxy with the tunnel option disabled would still wrongly re-use that
+  previous connection and the outcome would only be badness.
+
+Yang Tse (18 Nov 2009)
+- I modified the memory tracking system to make it intolerant with zero sized
+  malloc(), calloc() and realloc() function calls.
+
+Daniel Stenberg (17 Nov 2009)
+- Constantine Sapuntzakis provided another fix for the DNS cache that could
+  end up with entries that wouldn't time-out:
+
+  1. Set up a first web server that redirects (307) to a http://server:port
+     that's down
+  2. Have curl connect to the first web server using curl multi
+
+  After the curl_easy_cleanup call, there will be curl dns entries hanging
+  around with in_use != 0.
+
+  (http://curl.haxx.se/bug/view.cgi?id=2891591)
+
+- Marc Kleine-Budde fixed: curl saved the LDFLAGS set during configure into
+  its pkg-config file.  So -Wl stuff ended up in the .pc file, which is really
+  bad, and breaks if there are multiple -Wl in our LDFLAGS (which are in
+  PTXdist). bug #2893592 (http://curl.haxx.se/bug/view.cgi?id=2893592)
+
+Kamil Dudka (15 Nov 2009)
+- David Byron improved the configure script to use pkg-config to find OpenSSL
+  (and in particular the list of required libraries) even if a path is given
+  as argument to --with-ssl
+
+Yang Tse (15 Nov 2009)
+- I removed enable-thread / disable-thread configure option. These were only
+  placebo options. The library is always built as thread safe as possible on
+  every system.
+
+Claes Jakobsson (14 Nov 2009)
+- curl-config now accepts '--configure' to see what arguments was
+  passed to the configure script when building curl.
+
+Daniel Stenberg (14 Nov 2009)
+- Claes Jakobsson restored the configure functionality to detect NSS when
+  --with-nss is set but not "yes".
+
+  I think we can still improve that to check for pkg-config in that path etc,
+  but at least this patch brings back the same functionality we had before.
+
+- Camille Moncelier added support for the file type SSL_FILETYPE_ENGINE for
+  the client certificate. It also disable the key name test as some engines
+  can select a private key/cert automatically (When there is only one key
+  and/or certificate on the hardware device used by the engine)
+
+Yang Tse (14 Nov 2009)
+- Constantine Sapuntzakis provided the fix that ensures that an SSL connection
+  won't be reused unless protection level for peer and host verification match.
+
+  I refactored how preprocessor symbol _THREAD_SAFE definition is done.
+
+Kamil Dudka (12 Nov 2009)
+- Kevin Baughman provided a fix preventing libcurl-NSS from crash on doubly
+  closed NSPR descriptor. The issue was hard to find, reported several times
+  before and always closed unresolved. More info at the RH bug:
+  https://bugzilla.redhat.com/534176
+
+- libcurl-NSS now tries to reconnect with TLS disabled in case it detects
+  a broken TLS server. However it does not happen if SSL version is selected
+  manually. The approach was originally taken from PSM. Kaspar Brand helped me
+  to complete the patch. Original bug reports:
+  https://bugzilla.redhat.com/525496
+  https://bugzilla.redhat.com/527771
+
+Yang Tse (12 Nov 2009)
+- I modified configure script to make the getaddrinfo function check also
+  verify if the function is thread safe.
+
+Yang Tse (11 Nov 2009)
+- Marco Maggi reported that compilation failed when configured --with-gssapi
+  and GNU GSS installed due to a missing mutual exclusion of header files in
+  the Kerberos 5 code path. He also verified that my patch worked for him.
+
+Daniel Stenberg (11 Nov 2009)
+- Constantine Sapuntzakis posted bug #2891595
+  (http://curl.haxx.se/bug/view.cgi?id=2891595) which identified how an entry
+  in the DNS cache would linger too long if the request that added it was in
+  use that long. He also provided the patch that now makes libcurl capable of
+  still doing a request while the DNS hash entry may get timed out.
+  
+- Christian Schmitz noticed that the progress meter/callback was not properly
+  used during the FTP connection phase (after the actual TCP connect), while
+  it of course should be. I also made the speed check get called correctly so
+  that really slow servers will trigger that properly too.
+
+Kamil Dudka (5 Nov 2009)
+- Dropped misleading timeouts in libcurl-NSS and made sure the SSL socket works
+  in non-blocking mode.
+
+Yang Tse (5 Nov 2009)
+- I removed leading 'curl' path on the 'curlbuild.h' include statement in
+  curl.h, adjusting auto-makefiles include path, to enhance portability to
+  OS's without an orthogonal directory tree structure such as OS/400.
+
+Daniel Stenberg (4 Nov 2009)
+- I fixed several problems with the transfer progress meter. It showed the
+  wrong percentage for small files, most notable for <1000 bytes and could
+  easily end up showing more than 100% at the end. It also didn't show any
+  percentage, transfer size or estimated transfer times when transferring
+  less than 100 bytes.
+
 Version 7.19.7 (4 November 2009)
 
 Daniel Stenberg (2 Nov 2009)

Makefile.dist

@@ -263,15 +263,25 @@ linux: all
 linux-ssl: ssl
 
 
-vc8:
-	@echo "generate VC8 makefiles"
+vc8: lib/Makefile.vc8 src/Makefile.vc8
+
+lib/Makefile.vc8: lib/Makefile.vc6
+	@echo "generate $@"
 	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/wsock32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" lib/Makefile.vc6 > lib/Makefile.vc8
+
+src/Makefile.vc8: src/Makefile.vc6
+	@echo "generate $@"
 	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/wsock32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" src/Makefile.vc6 > src/Makefile.vc8
 
 # VC9 makefiles are for use with VS2008
-vc9:
-	@echo "generate VC9 makefiles"
+vc9: lib/Makefile.vc9 src/Makefile.vc9
+
+lib/Makefile.vc9: lib/Makefile.vc6
+	@echo "generate $@"
 	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" lib/Makefile.vc6 > lib/Makefile.vc9
+
+src/Makefile.vc9: src/Makefile.vc6
+	@echo "generate $@"
 	@sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/wsock32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" src/Makefile.vc6 > src/Makefile.vc9
 
 ca-bundle: lib/mk-ca-bundle.pl

RELEASE-NOTES

@@ -1,51 +1,59 @@
-Curl and libcurl 7.19.7
+Curl and libcurl 7.20.0
 
- Public curl releases:         113
- Command line options:         132
- curl_easy_setopt() options:   163
+ Public curl releases:         114
+ Command line options:         136
+ curl_easy_setopt() options:   174
  Public functions in libcurl:  58
- Known libcurl bindings:       38
- Contributors:                 732
+ Known libcurl bindings:       39
+ Contributors:                 761
 
 This release includes the following changes:
 
- o -T. is now for non-blocking uploading from stdin
- o SYST handling on FTP for OS/400 FTP server cases
- o libcurl refuses to read a single HTTP header longer than 100K
- o added the --crlfile option to curl
+ o support SSL_FILETYPE_ENGINE for client certificate
+ o curl-config can now show the arguments used when building curl
+ o non-blocking TFTP
+ o send Expect: 100-continue for POSTs with unknown sizes
+ o added support for IMAP(S), POP3(S), SMTP(S) and RTSP
+ o added new curl_easy_setopt() options for SMTP and RTSP
+ o added --mail-from and --mail-rcpt for SMTP
+ o VMS build system enhancements
+ o added support for the PRET ftp command
+ o curl supports --ssl and --ssl-reqd
+ o added -J/--remote-header-name for using server-provided filename with -O
+ o enhanced asynchronous DNS lookups
+ o symbol CURL_FORMAT_OFF_T is obsoleted
 
 This release includes the following bugfixes:
 
- o The windows makefiles work again
- o libcurl-NSS acknowledges verifyhost
- o SIGSEGV when pipelined pipe unexpectedly breaks
- o data corruption issue with re-connected transfers
- o use after free if we're completed but easy_conn not NULL (pipelined)
- o missing strdup() return code check
- o CURLOPT_PROXY_TRANSFER_MODE could pass along wrong syntax
- o configure --with-gnutls=PATH fixed
- o ftp response reader bug on failed control connections
- o improved NSS error message on failed host name verifications
- o ftp NOBODY on re-used connection hang
- o configure uses pkg-config for cross-compiles as well
- o improved NSS detection in configure
- o cookie expiry date at 1970-jan-1 00:00:00
- o libcurl-OpenSSL failed to verify some certs with Subject Alternative Name
- o libcurl-OpenSSL can load CRL files with more than one certificate inside
- o received cookies without explicit path got saved wrong if the URL had a
-   query part
- o don't shrink SO_SNDBUF on windows for those who have it set large already
- o connect next bug
- o invalid file name characters handling on Windows
- o double close() on the primary socket with libcurl-NSS
- o GSS negotiate infinite loop on bad credentials
- o memory leak in SCP/SFTP connections
- o use pkg-config to find out libssh2 installation details in configure
- o unparsable cookie expire dates make cookies get treated as session coookies
- o POST with Digest authentication and "Transfer-Encoding: chunked"
- o SCP connection re-use with wrong auth
- o CURLINFO_CONTENT_LENGTH_DOWNLOAD for 0 bytes transfers
- o CURLINFO_SIZE_DOWNLOAD for ldap transfers (-w size_download)
+ o progress meter percentage and transfer time estimates fixes
+ o portability enhancement for OS's without orthogonal directory tree structure
+ o progress meter/callback during FTP connection
+ o DNS cache timeout while transfer in progress
+ o compilation when configured --with-gssapi having GNU GSS installed
+ o SSL connection reused with mismatched protection level
+ o configure --with-nss is set but not "yes"
+ o don't store LDFLAGS in pkg-config file
+ o never-pruned DNS cached entries
+ o HTTP proxy tunnel re-used connection even if tunnel got disabled
+ o SSL lib post-close write
+ o curl failed to report write errors for tiny failed downloads
+ o TFTP BLKSIZE
+ o Expect: 100-continue handling when set by the application
+ o multi interface with OpenSSL read already freed memory when closing down
+ o --retry didn't do right for FTP transient errors
+ o some *_proxy environment variables didn't function
+ o libcurl-OpenSSL engine cleanup
+ o header include fix for FreeBSD versions before v8
+ o fragment part of URLs are no longer sent to the server
+ o progress callback called repeatedly with c-ares for resolving
+ o OpenSSL session id ref count leak
+ o progress callback called repeatedly during slow connects
+ o curl_multi_fdset() would return -1 too often during SCP/SFTP transfers
+ o FTP file size checks with ASCII transfers
+ o HTTP Cookie: headers sort cookies based on specified path lengths
+ o CURLM_CALL_MULTI_PERFORM fix for multi socket timeout calls
+ o libcurl data callback excessive length:
+   http://curl.haxx.se/docs/adv_20100209.html
 
 This release includes the following known bugs:
 
@@ -54,11 +62,12 @@ This release includes the following known bugs:
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Karl Moerder, Kamil Dudka, Krister Johansen, Andre Guibert de Bruet,
- Michal Marek, Eric Wong, Guenter Knauf, Peter Sylvester, Daniel Johnson,
- Claes Jakobsson, Sven Anders, Chris Mumford, John P. McCaskey,
- Constantine Sapuntzakis, Michael Stillwell, Tom Mueller, Dan Fandrich,
- Kevin Baughman, John Dennis, Ray Dassen, Johan van Selst, Dima Barsky,
- Liza Alenchery, Gabriel Kuri, Stan van de Burgt, Didier Brisebourg
+ Yang Tse, Kamil Dudka, Christian Schmitz, Constantine Sapuntzakis,
+ Marco Maggi, Camille Moncelier, Claes Jakobsson, Kevin Baughman,
+ Marc Kleine-Budde, Jad Chamcham, Bjorn Augustsson, David Byron,
+ Markus Koetter, Chad Monroe, Martin Storsjo, Siegfried Gyuricsko,
+ Jon Nelson, Julien Chaffraix, Renato Botelho, Peter Pentchev, Ingmar Runge,
+ Johan van Selst, Charles Kerr, Gil Weber, David McCreedy, Chris Conroy,
+ Bjorn Stenberg, Mike Crowe, Joshua Kwan, Daniel Fandrich, Wesley Miaw
 
         Thanks! (and sorry if I forgot to mention someone)

TODO-RELEASE

@@ -1,4 +1,4 @@
-To be addressed in 7.19.8 (planned release: January 2010)
+To be addressed in 7.20.0 (planned release: January 2010)
 =========================
 
 244 - patch for [out] parameters
@@ -12,11 +12,4 @@ To be addressed in 7.19.8 (planned release: January 2010)
 
 253 - add option to disable SNI for TLS handshakes
 
-257 - bug #2891595  DNS cache
-
-258 - bug #2891591  Curl_dns_entry
-
-259 - Avoding connection re-use when using CURLOPT_HTTPPROXYTUNNEL
-
-260 -
-
+261 - 

acinclude.m4

@@ -3190,7 +3190,22 @@ AC_DEFUN([CURL_CHECK_WIN32_LARGEFILE], [
   esac
 ])
 
-dnl CURL_CHECK_PKGCONFIG ($module)
+dnl CURL_EXPORT_PCDIR ($pcdir)
+dnl ------------------------
+dnl if $pcdir is not empty, set PKG_CONFIG_LIBDIR to $pcdir and export
+dnl
+dnl we need this macro since pkg-config distinguishes among empty and unset
+dnl variable while checking PKG_CONFIG_LIBDIR
+dnl
+
+AC_DEFUN([CURL_EXPORT_PCDIR], [
+    if test -n "$1"; then
+      PKG_CONFIG_LIBDIR="$1"
+      export PKG_CONFIG_LIBDIR
+    fi
+])
+
+dnl CURL_CHECK_PKGCONFIG ($module, [$pcdir])
 dnl ------------------------
 dnl search for the pkg-config tool (if not cross-compiling). Set the PKGCONFIG
 dnl variable to hold the path to it, or 'no' if not found/present.
@@ -3198,6 +3213,8 @@ dnl
 dnl If pkg-config is present, check that it has info about the $module or
 dnl return "no" anyway!
 dnl
+dnl Optionally PKG_CONFIG_LIBDIR may be given as $pcdir.
+dnl
 
 AC_DEFUN([CURL_CHECK_PKGCONFIG], [
 
@@ -3216,8 +3233,10 @@ AC_DEFUN([CURL_CHECK_PKGCONFIG], [
     if test x$PKGCONFIG != xno; then
       AC_MSG_CHECKING([for $1 options with pkg-config])
       dnl ask pkg-config about $1
-      $PKGCONFIG --exists $1
-      if test "$?" -ne "0"; then
+      itexists=`CURL_EXPORT_PCDIR([$2]) dnl
+        $PKGCONFIG --exists $1 >/dev/null 2>&1 && echo 1`
+
+      if test -z "$itexists"; then
         dnl pkg-config does not have info about the given module! set the
         dnl variable to 'no'
         PKGCONFIG="no"

ares/.cvsignore

@@ -3,6 +3,7 @@
 *.pdf
 .deps
 .libs
+MSVC*
 Makefile
 Makefile.in
 aclocal.m4
@@ -30,4 +31,5 @@ libtool
 ltmain.sh
 man3
 missing
+msvc*
 stamp-h*

ares/CHANGES

@@ -1,5 +1,64 @@
   Changelog for the c-ares project
 
+* January 28, 2010 (Daniel Stenberg)
+- Tommie Gannert pointed out a silly bug in ares_process_fd() since it didn't
+  check for broken connections like ares_process() did. Based on that, I
+  merged the two functions into a single generic one with two front-ends.
+
+* December 29, 2009 (Yang Tse)
+- Laszlo Tamas Szabo adjusted Makefile.msvc compiler options so that where
+  run-time error checks enabling compiler option /GZ was used it is replaced
+  with equivalent /RTCsu for Visual Studio 2003 and newer versions. Option
+  /GX is replaced with equivalent /EHsc for all versions. Also fixed socket
+  data type for internal configure_socket function.
+
+* December 21, 2009 (Yang Tse)
+- Ingmar Runge noticed that Windows config-win32.h configuration file
+  did not include a definition for HAVE_CLOSESOCKET which resulted in
+  function close() being inappropriately used to close sockets.
+
+Version 1.7.0 (Nov 30, 2009)
+
+* November 26, 2009 (Yang Tse)
+- Larry Lansing fixed ares_parse_srv_reply to properly parse replies
+  which might contain non-SRV answers, skipping over potential non-SRV
+  ones such as CNAMEs.
+
+* November 23, 2009 (Yang Tse)
+- Changed naming convention for c-ares libraries built with MSVC, details
+  and build instructions provided in README.msvc file.
+
+* November 22, 2009 (Yang Tse)
+- Jakub Hrozek fixed more function prototypes in man pages to sync them
+  with the ones declared in ares.h
+
+- Jakub Hrozek renamed addrttl and addr6ttl structs to ares_addrttl and
+  ares_addr6ttl in order to prevent name space pollution, along with
+  necessary changes to code base and man pages.This change does not break
+  ABI, there is no need to recompile existing applications. But existing
+  applications using these structs with the old name will need source code
+  adjustments when recompiled using c-ares 1.7.0.
+
+* November 21, 2009 (Yang Tse)
+- Added manifest stuff to Makefile.msvc.
+
+* November 20, 2009 (Yang Tse)
+- Fixed several function prototypes in man pages that were out of sync
+  with the ones declared in ares.h.  Added ares_free_data() along with
+  man page.  Updated ares_parse_srv_reply() and ares_parse_txt_reply()
+  with changes from Jakub Hrozek making these now return linked lists
+  instead of arrays, and merging the ares_free_data() adjustments.
+
+* November 10, 2009 (Yang Tse)
+- Updated MSVC 6.0 project files to match settings from Makefile.msvc.
+
+* November 9, 2009 (Yang Tse)
+- Makefile.msvc is now the reference method to build c-ares and sample
+  programs with any MSVC compiler or MS Visual Studio version.  If no
+  option or target are specified it builds dynamic and static c-ares
+  libraries in debug and release flavours and also builds all sample
+  programs using each of the different c-ares libraries.
+
 * November 2, 2009 (Yang Tse)
 - Renamed c-ares setup.h to ares_setup.h
 
@@ -117,15 +176,15 @@
 - Introduced ares_library_init() and ares_library_cleanup() functions.
 
   This is an API and ABI break for Win32/64 systems. Non-Win32/64 build targets
-  using c-ares 1.6.1 can still survive without calling these functions. Read all
+  using c-ares 1.7.0 can still survive without calling these functions. Read all
   the details on ares_library_init(3) and ares_library_cleanup(3) man pages that
   are included.
 
-  curl/libcurl 7.19.5 is fully compatible with c-ares 1.6.1 on all systems.
+  curl/libcurl 7.19.5 is fully compatible with c-ares 1.7.0 on all systems.
 
-  In order to use c-ares 1.6.1 with curl/libcurl on Win32/64 systems it is
+  In order to use c-ares 1.7.0 with curl/libcurl on Win32/64 systems it is
   required that curl/libcurl is 7.19.5 or newer. In other words, it is not
-  possible on Win32/64 to use c-ares 1.6.1 with a curl/libcurl version less
+  possible on Win32/64 to use c-ares 1.7.0 with a curl/libcurl version less
   than 7.19.5
 
 * May 11 2009 (Daniel Stenberg)

ares/Makefile.am

@@ -13,6 +13,7 @@ ACLOCAL_AMFLAGS = -I m4
 # only works when c-ares is built and linked with a similarly debug-build
 # libcurl, but we do this anyway for convenience.
 #
+# $(top_builddir)/../include/curl for generated curlbuild.h included from curl.h
 # $(top_builddir)/../include is for libcurl's generated curl/curlbuild.h file
 # $(top_srcdir)/../include is for libcurl's external include files
 # $(top_builddir)/../lib is for libcurl's generated lib/curl_config.h file
@@ -21,11 +22,12 @@ ACLOCAL_AMFLAGS = -I m4
 # $(top_srcdir) is for c-ares's ares_setup.h and other "c-ares-private" files
 
 if CURLDEBUG
-INCLUDES = -I$(top_builddir)/../include \
-           -I$(top_srcdir)/../include   \
-           -I$(top_builddir)/../lib     \
-           -I$(top_srcdir)/../lib       \
-           -I$(top_builddir)            \
+INCLUDES = -I$(top_builddir)/../include/curl \
+           -I$(top_builddir)/../include      \
+           -I$(top_srcdir)/../include        \
+           -I$(top_builddir)/../lib          \
+           -I$(top_srcdir)/../lib            \
+           -I$(top_builddir)                 \
            -I$(top_srcdir)
 else
 INCLUDES = -I$(top_builddir) \
@@ -50,9 +52,9 @@ noinst_PROGRAMS =$(PROGS)
 # adig and ahost are just sample programs and thus not mentioned with the
 # regular sources and headers
 EXTRA_DIST = AUTHORS CHANGES README.cares Makefile.inc Makefile.dj	   \
- Makefile.m32 Makefile.netware Makefile.vc6 $(man_MANS) $(MSVCFILES)	   \
+ Makefile.m32 Makefile.netware Makefile.msvc $(man_MANS) $(MSVCFILES)	   \
  config-win32.h RELEASE-NOTES libcares.pc.in buildconf get_ver.awk maketgz \
- TODO ares_build.h.in $(PDFPAGES) cares.rc
+ TODO ares_build.h.in $(PDFPAGES) cares.rc README.msvc
 
 CLEANFILES = $(PDFPAGES) $(HTMLPAGES)
 
@@ -108,14 +110,17 @@ libcares_ladir = $(includedir)
 libcares_la_HEADERS = ares.h ares_version.h ares_dns.h \
 	ares_build.h ares_rules.h
 
-ahost_SOURCES = ahost.c ares_getopt.c ares_getopt.h
+ahost_SOURCES = ahost.c $(SAMPLESOURCES) $(SAMPLEHEADERS)
 ahost_LDADD = $(top_builddir)/libcares.la
+ahost_CFLAGS = $(AM_CFLAGS)
 
-adig_SOURCES = adig.c ares_getopt.c ares_getopt.h
+adig_SOURCES = adig.c $(SAMPLESOURCES) $(SAMPLEHEADERS)
 adig_LDADD = $(top_builddir)/libcares.la
+adig_CFLAGS = $(AM_CFLAGS)
 
-acountry_SOURCES = acountry.c ares_getopt.c ares_getopt.h
+acountry_SOURCES = acountry.c $(SAMPLESOURCES) $(SAMPLEHEADERS)
 acountry_LDADD = $(top_builddir)/libcares.la
+acountry_CFLAGS = $(AM_CFLAGS)
 
 SOURCEDMANDIR = man3
 SOURCEDMANPAGES = ares_init.3

ares/Makefile.inc

@@ -4,6 +4,7 @@ CSOURCES = ares__close_sockets.c	\
   ares__read_line.c			\
   ares__timeval.c			\
   ares_cancel.c				\
+  ares_data.c				\
   ares_destroy.c			\
   ares_expand_name.c			\
   ares_expand_string.c			\
@@ -41,6 +42,7 @@ CSOURCES = ares__close_sockets.c	\
 
 HHEADERS = ares.h			\
   ares_build.h				\
+  ares_data.h				\
   ares_dns.h				\
   ares_ipv6.h				\
   ares_library_init.h			\
@@ -65,6 +67,7 @@ MANPAGES = ares_cancel.3		\
   ares_expand_name.3			\
   ares_expand_string.3			\
   ares_fds.3				\
+  ares_free_data.3			\
   ares_free_hostent.3			\
   ares_free_string.3			\
   ares_gethostbyaddr.3			\
@@ -100,6 +103,7 @@ HTMLPAGES = ares_cancel.html		\
   ares_expand_name.html			\
   ares_expand_string.html		\
   ares_fds.html				\
+  ares_free_data.html			\
   ares_free_hostent.html		\
   ares_free_string.html			\
   ares_gethostbyaddr.html		\
@@ -135,6 +139,7 @@ PDFPAGES = ares_cancel.pdf		\
   ares_expand_name.pdf			\
   ares_expand_string.pdf		\
   ares_fds.pdf				\
+  ares_free_data.pdf			\
   ares_free_hostent.pdf			\
   ares_free_string.pdf			\
   ares_gethostbyaddr.pdf		\
@@ -163,3 +168,12 @@ PDFPAGES = ares_cancel.pdf		\
   ares_timeout.pdf			\
   ares_version.pdf
 
+SAMPLESOURCES = ares_getopt.c		\
+  ares_strcasecmp.c			\
+  inet_net_pton.c			\
+  inet_ntop.c
+
+SAMPLEHEADERS = ares_getopt.h		\
+  ares_strcasecmp.h			\
+  inet_net_pton.h			\
+  inet_ntop.h

ares/Makefile.msvc

@@ -0,0 +1,473 @@
+# $Id$
+
+# Copyright (C) 2009 by Daniel Stenberg
+#
+# Permission to use, copy, modify, and distribute this
+# software and its documentation for any purpose and without
+# fee is hereby granted, provided that the above copyright
+# notice appear in all copies and that both that copyright
+# notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in
+# advertising or publicity pertaining to distribution of the
+# software without specific, written prior permission.
+# M.I.T. makes no representations about the suitability of
+# this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+
+# ------------------------------------------------------------------------------
+#
+# Makefile for building c-ares libraries and sample programs with MSVC.
+#
+# Usage: nmake /f makefile.msvc CFG=<config> <target>
+# 
+# <config> must be one of: [ lib-release | lib-debug | dll-release | dll-debug }
+# <target> must be one of: [ ALL | c-ares | acountry | adig | ahost | clean }
+# 
+# If a <target> other than ALL or clean is given, <config> becomes mandatory.
+# 
+# If neither <config> nor <target> are specified this results in
+# all targets being built for all <config> c-ares library types.
+#
+# This makefile must be processed from the subdir where it is located.
+#
+# All results are generated below a subdirectory named msvcXXX.
+#
+# ------------------------------------------------------------------------------
+
+NAME = cares
+
+# ------------------------------------------------
+# c-ares static and dynamic libraries common base
+# file names for release and debug configurations
+# ------------------------------------------------
+
+STA_LIB_REL = lib$(NAME)
+DYN_LIB_REL = $(NAME)
+STA_LIB_DBG = $(STA_LIB_REL)d
+DYN_LIB_DBG = $(DYN_LIB_REL)d
+
+# -------------------------------------------
+# Base names for c-ares DLL import libraries
+# -------------------------------------------
+
+IMP_LIB_REL = $(DYN_LIB_REL)
+IMP_LIB_DBG = $(DYN_LIB_DBG)
+
+# --------------------------
+# Runtime library selection
+# --------------------------
+
+RTLIB  = /MD
+RTLIBD = /MDd
+
+!IF "$(RTLIBCFG)" == "static"
+RTLIB  = /MT
+RTLIBD = /MTd
+!ENDIF
+
+# --------------------------------------------------------
+# Define USE_WATT32 to 1 to use the Watt-32 tcp/ip stack,
+# otherwise Winsock tcp/ip stack will be used as default.
+# --------------------------------------------------------
+
+USE_WATT32 = 0
+
+# -------------------------------------------
+# Detect NMAKE version deducing MSVC version
+# -------------------------------------------
+
+!IFNDEF _NMAKE_VER
+!  MESSAGE Macro _NMAKE_VER not defined.
+!  MESSAGE Use MSVC's NMAKE to process this makefile.
+!  ERROR   See previous message.
+!ENDIF
+
+!IF     "$(_NMAKE_VER)" == "6.00.8168.0"
+CC_VERS_NUM = 60
+!ELSEIF "$(_NMAKE_VER)" == "6.00.9782.0"
+CC_VERS_NUM = 60
+!ELSEIF "$(_NMAKE_VER)" == "7.00.9466"
+CC_VERS_NUM = 70
+!ELSEIF "$(_NMAKE_VER)" == "7.00.9955"
+CC_VERS_NUM = 70
+!ELSEIF "$(_NMAKE_VER)" == "7.10.3077"
+CC_VERS_NUM = 71
+!ELSEIF "$(_NMAKE_VER)" == "8.00.40607.16"
+CC_VERS_NUM = 80
+!ELSEIF "$(_NMAKE_VER)" == "8.00.50727.42"
+CC_VERS_NUM = 80
+!ELSEIF "$(_NMAKE_VER)" == "8.00.50727.762"
+CC_VERS_NUM = 80
+!ELSEIF "$(_NMAKE_VER)" == "9.00.21022.08"
+CC_VERS_NUM = 90
+!ELSEIF "$(_NMAKE_VER)" == "9.00.30729.01"
+CC_VERS_NUM = 90
+!ELSEIF "$(_NMAKE_VER)" == "10.00.20506.01"
+CC_VERS_NUM = 100
+!ELSE
+!  MESSAGE Unknown value for _NMAKE_VER macro: "$(_NMAKE_VER)"
+!  MESSAGE Please, report this condition on the c-ares development
+!  MESSAGE mailing list: http://cool.haxx.se/mailman/listinfo/c-ares/
+!  ERROR   See previous message.
+!ENDIF
+
+CC_VERS_STR = msvc$(CC_VERS_NUM)
+
+# ----------------------------------------------------
+# Verify that current subdir is the c-ares source one
+# ----------------------------------------------------
+
+!IF ! EXIST(.\ares_init.c)
+!  MESSAGE Can not process Makefile.msvc from outside of c-ares source subdirectory.
+!  MESSAGE Change to the subdirectory where Makefile.msvc is found, and try again.
+!  ERROR   See previous message.
+!ENDIF
+
+# ------------------------------------------------------------------
+# Base subdir is the common root from which other subdirs will hang,
+# the name depends on MSVC version being used when building c-ares.
+# ------------------------------------------------------------------
+
+BASE_DIR = .\$(CC_VERS_STR)
+
+# ----------------------------------------
+# Subdir holding sources for all projects
+# ----------------------------------------
+
+SRCDIR = .
+
+# -------------------------
+# Configuration validation
+# -------------------------
+
+VALID_CFGSET = FALSE
+!IF "$(CFG)" == "lib-release" || "$(CFG)" == "lib-debug" || \
+    "$(CFG)" == "dll-release" || "$(CFG)" == "dll-debug"
+VALID_CFGSET = TRUE
+!ENDIF
+
+!IF "$(VALID_CFGSET)" == "FALSE" && "$(CFG)" != ""
+!  MESSAGE MSVC c-ares makefile
+!  MESSAGE
+!  MESSAGE Usage: nmake /f makefile.msvc CFG=<config> <target>
+!  MESSAGE
+!  MESSAGE <config> must be one of: [ lib-release | lib-debug | dll-release | dll-debug }
+!  MESSAGE <target> must be one of: [ ALL | c-ares | acountry | adig | ahost | clean }
+!  MESSAGE
+!  MESSAGE If a <target> other than ALL or clean is given, <config> becomes mandatory.
+!  MESSAGE
+!  MESSAGE If neither <config> nor <target> are specified this results in
+!  MESSAGE all targets being built for all <config> c-ares library types.
+!  MESSAGE
+!  ERROR Choose a valid configuration.
+!ENDIF
+
+# --------------------------------------------------------
+# Project subdirs independent of configuration being used
+# --------------------------------------------------------
+
+CARES_DIR = $(BASE_DIR)\cares
+PROG1_DIR = $(BASE_DIR)\acountry
+PROG2_DIR = $(BASE_DIR)\adig
+PROG3_DIR = $(BASE_DIR)\ahost
+
+# ---------------------------------------------------
+# Subdirs which are configuration dependent are only
+# defined when a valid configuration has been given.
+# ---------------------------------------------------
+
+!IF "$(VALID_CFGSET)" == "TRUE"
+CARES_OUTDIR = $(CARES_DIR)\$(CFG)
+PROG1_OUTDIR = $(PROG1_DIR)\$(CFG)
+PROG2_OUTDIR = $(PROG2_DIR)\$(CFG)
+PROG3_OUTDIR = $(PROG3_DIR)\$(CFG)
+CARES_OBJDIR = $(CARES_OUTDIR)\obj
+PROG1_OBJDIR = $(PROG1_OUTDIR)\obj
+PROG2_OBJDIR = $(PROG2_OUTDIR)\obj
+PROG3_OBJDIR = $(PROG3_OUTDIR)\obj
+!ELSE
+!UNDEF CARES_OUTDIR
+!UNDEF PROG1_OUTDIR
+!UNDEF PROG2_OUTDIR
+!UNDEF PROG3_OUTDIR
+!UNDEF CARES_OBJDIR
+!UNDEF PROG1_OBJDIR
+!UNDEF PROG2_OBJDIR
+!UNDEF PROG3_OBJDIR
+!ENDIF
+
+# -------------------------------------
+# Settings that depend on tcp/ip stack
+# -------------------------------------
+
+!IF "$(USE_WATT32)" == "1"
+CFLAGS  = /UWIN32 /DWATT32 /I$(WATT_ROOT)\inc
+EX_LIBS_REL = $(WATT_ROOT)\lib\wattcpvc_imp.lib
+EX_LIBS_DBG = $(WATT_ROOT)\lib\wattcpvc_imp_d.lib
+!ELSE
+CFLAGS  = /DWIN32
+EX_LIBS_REL = ws2_32.lib advapi32.lib kernel32.lib
+EX_LIBS_DBG = ws2_32.lib advapi32.lib kernel32.lib
+!ENDIF
+
+# -----------------------------------------
+# Switches that depend on compiler version
+# -----------------------------------------
+
+!IF $(CC_VERS_NUM) == 60
+PDB_NONE            = /pdb:none
+PDBTYPE_CONSOLIDATE = /pdbtype:consolidate
+!ELSE
+!UNDEF PDB_NONE
+!UNDEF PDBTYPE_CONSOLIDATE
+!ENDIF
+
+!IF $(CC_VERS_NUM) <= 70
+RT_ERROR_CHECKING = /GZ
+!ELSE
+RT_ERROR_CHECKING = /RTCsu
+!ENDIF
+
+# ----------------------------
+# Assorted commands and flags
+# ----------------------------
+
+CC_CMD_REL = cl.exe /nologo $(RTLIB) /DNDEBUG /O2
+CC_CMD_DBG = cl.exe /nologo $(RTLIBD) /D_DEBUG /Od /Zi $(RT_ERROR_CHECKING)
+CC_CFLAGS  = $(CFLAGS) /I. /W3 /EHsc /FD
+
+RC_CMD_REL = rc.exe /l 0x409 /d "NDEBUG"
+RC_CMD_DBG = rc.exe /l 0x409 /d "_DEBUG"
+
+LINK_CMD_LIB = link.exe /lib /nologo
+LINK_CMD_DLL = link.exe /dll /nologo /incremental:no /fixed:no
+LINK_CMD_EXE = link.exe /nologo /incremental:no /fixed:no /subsystem:console
+
+LINK_CMD_EXE_REL = $(LINK_CMD_EXE) /release $(PDB_NONE)
+LINK_CMD_EXE_DBG = $(LINK_CMD_EXE) /debug $(PDBTYPE_CONSOLIDATE)
+
+# ---------------------------------
+# Configuration dependent settings
+# ---------------------------------
+
+!IF "$(CFG)" == "lib-release"
+CARES_TARGET = $(STA_LIB_REL).lib
+CARES_CFLAGS = /DCARES_BUILDING_LIBRARY /DCARES_STATICLIB
+CARES_LFLAGS =
+SPROG_CFLAGS = /DCARES_STATICLIB
+SPROG_LFLAGS = /libpath:$(CARES_OUTDIR) $(EX_LIBS_REL) $(STA_LIB_REL).lib
+CARES_LINK   = $(LINK_CMD_LIB)
+SPROG_LINK   = $(LINK_CMD_EXE_REL)
+CC_CMD       = $(CC_CMD_REL)
+!ENDIF
+
+!IF "$(CFG)" == "lib-debug"
+CARES_TARGET = $(STA_LIB_DBG).lib
+CARES_CFLAGS = /DCARES_BUILDING_LIBRARY /DCARES_STATICLIB /DDEBUGBUILD
+CARES_LFLAGS =
+SPROG_CFLAGS = /DCARES_STATICLIB
+SPROG_LFLAGS = /libpath:$(CARES_OUTDIR) $(EX_LIBS_DBG) $(STA_LIB_DBG).lib
+CARES_LINK   = $(LINK_CMD_LIB)
+SPROG_LINK   = $(LINK_CMD_EXE_DBG)
+CC_CMD       = $(CC_CMD_DBG)
+!ENDIF
+
+!IF "$(CFG)" == "dll-release"
+CARES_TARGET = $(DYN_LIB_REL).dll
+CARES_CFLAGS = /DCARES_BUILDING_LIBRARY
+CARES_LFLAGS = /release $(EX_LIBS_REL) /implib:$(CARES_OUTDIR)\$(IMP_LIB_REL).lib $(PDB_NONE)
+SPROG_CFLAGS =
+SPROG_LFLAGS = /libpath:$(CARES_OUTDIR) $(EX_LIBS_REL) $(IMP_LIB_REL).lib
+CARES_LINK   = $(LINK_CMD_DLL)
+SPROG_LINK   = $(LINK_CMD_EXE_REL)
+CC_CMD       = $(CC_CMD_REL)
+USE_RES_FILE = TRUE
+RC_CMD       = $(RC_CMD_REL)
+!ENDIF
+
+!IF "$(CFG)" == "dll-debug"
+CARES_TARGET = $(DYN_LIB_DBG).dll
+CARES_CFLAGS = /DCARES_BUILDING_LIBRARY /DDEBUGBUILD
+CARES_LFLAGS = /debug $(EX_LIBS_DBG) /implib:$(CARES_OUTDIR)\$(IMP_LIB_DBG).lib /pdb:$(CARES_OUTDIR)\$(DYN_LIB_DBG).pdb $(PDBTYPE_CONSOLIDATE)
+SPROG_CFLAGS =
+SPROG_LFLAGS = /libpath:$(CARES_OUTDIR) $(EX_LIBS_DBG) $(IMP_LIB_DBG).lib
+CARES_LINK   = $(LINK_CMD_DLL)
+SPROG_LINK   = $(LINK_CMD_EXE_DBG)
+CC_CMD       = $(CC_CMD_DBG)
+USE_RES_FILE = TRUE
+RC_CMD       = $(RC_CMD_DBG)
+!ENDIF
+
+# --------------------------------------------
+# Makefile.inc provides lists of source files
+# --------------------------------------------
+
+!INCLUDE .\Makefile.inc
+
+# ----------------------------
+# Build lists of object files
+# ----------------------------
+
+!IF "$(VALID_CFGSET)" == "TRUE"
+
+!IF [ECHO CARES_OBJS=^$(CARES_OBJDIR)\$(CSOURCES: = $(CARES_OBJDIR^)\) > .\cares_objs.inc] == 0
+!INCLUDE .\cares_objs.inc
+!IF [DEL .\cares_objs.inc]
+!ENDIF
+!ELSE
+!ERROR Problem generating CARES_OBJS list.
+!ENDIF
+CARES_OBJS = $(CARES_OBJS:.c=.obj)
+!IF "$(USE_RES_FILE)" == "TRUE"
+CARES_OBJS = $(CARES_OBJS) $(CARES_OBJDIR)\cares.res
+!ENDIF
+
+!IF [ECHO PROG1_OBJS=^$(PROG1_OBJDIR)\$(SAMPLESOURCES: = $(PROG1_OBJDIR^)\) > .\prog1_objs.inc] == 0
+!INCLUDE .\prog1_objs.inc
+!IF [DEL .\prog1_objs.inc]
+!ENDIF
+!ELSE
+!ERROR Problem generating PROG1_OBJS list.
+!ENDIF
+PROG1_OBJS = $(PROG1_OBJS:.c=.obj)
+PROG1_OBJS = $(PROG1_OBJS) $(PROG1_OBJDIR)\acountry.obj
+
+!IF [ECHO PROG2_OBJS=^$(PROG2_OBJDIR)\$(SAMPLESOURCES: = $(PROG2_OBJDIR^)\) > .\prog2_objs.inc] == 0
+!INCLUDE .\prog2_objs.inc
+!IF [DEL .\prog2_objs.inc]
+!ENDIF
+!ELSE
+!ERROR Problem generating PROG2_OBJS list.
+!ENDIF
+PROG2_OBJS = $(PROG2_OBJS:.c=.obj)
+PROG2_OBJS = $(PROG2_OBJS) $(PROG2_OBJDIR)\adig.obj
+
+!IF [ECHO PROG3_OBJS=^$(PROG3_OBJDIR)\$(SAMPLESOURCES: = $(PROG3_OBJDIR^)\) > .\prog3_objs.inc] == 0
+!INCLUDE .\prog3_objs.inc
+!IF [DEL .\prog3_objs.inc]
+!ENDIF
+!ELSE
+!ERROR Problem generating PROG3_OBJS list.
+!ENDIF
+PROG3_OBJS = $(PROG3_OBJS:.c=.obj)
+PROG3_OBJS = $(PROG3_OBJS) $(PROG3_OBJDIR)\ahost.obj
+
+!ENDIF
+
+# --------------------------------
+# Only our custom inference rules
+# --------------------------------
+
+.SUFFIXES:
+.SUFFIXES: .c .rc
+
+{$(SRCDIR)}.rc{$(CARES_OBJDIR)}.res:
+    $(RC_CMD) /Fo $@ $<
+
+{$(SRCDIR)}.c{$(CARES_OBJDIR)}.obj:
+    $(CC_CMD) $(CC_CFLAGS) $(CARES_CFLAGS) /Fo$@ /Fd$(@D)\ /c $<
+
+{$(SRCDIR)}.c{$(PROG1_OBJDIR)}.obj:
+    $(CC_CMD) $(CC_CFLAGS) $(SPROG_CFLAGS) /Fo$@ /Fd$(@D)\ /c $<
+
+{$(SRCDIR)}.c{$(PROG2_OBJDIR)}.obj:
+    $(CC_CMD) $(CC_CFLAGS) $(SPROG_CFLAGS) /Fo$@ /Fd$(@D)\ /c $<
+
+{$(SRCDIR)}.c{$(PROG3_OBJDIR)}.obj:
+    $(CC_CMD) $(CC_CFLAGS) $(SPROG_CFLAGS) /Fo$@ /Fd$(@D)\ /c $<
+
+# ------------------------------------------------------------- #
+# ------------------------------------------------------------- #
+# Default target when no CFG library type has been specified,   #
+# results in building target ALL for all c-ares library types.  #
+# ------------------------------------------------------------- #
+# ------------------------------------------------------------- #
+
+!IF "$(VALID_CFGSET)" == "FALSE"
+
+ALL:
+    $(MAKE) /f .\Makefile.msvc  CFG=lib-release  ALL
+    $(MAKE) /f .\Makefile.msvc  CFG=lib-debug    ALL
+    $(MAKE) /f .\Makefile.msvc  CFG=dll-release  ALL
+    $(MAKE) /f .\Makefile.msvc  CFG=dll-debug    ALL
+
+clean:
+    @-RMDIR /S /Q $(BASE_DIR) >NUL 2>&1
+
+!ENDIF
+
+# ---------------------------------------------------------------------
+# Targets only available when a proper CFG library type has been given
+# ---------------------------------------------------------------------
+
+!IF "$(VALID_CFGSET)" == "TRUE"
+
+ALL: c-ares acountry adig ahost
+    @
+
+c-ares: $(HHEADERS) $(CSOURCES) $(CARES_OBJDIR) $(CARES_OBJS) $(CARES_OUTDIR)
+    $(CARES_LINK) $(CARES_LFLAGS) /out:$(CARES_OUTDIR)\$(CARES_TARGET) $(CARES_OBJS)
+!   IF "$(USE_RES_FILE)" == "TRUE"
+    @if exist $(CARES_OUTDIR)\$(CARES_TARGET).manifest mt -nologo -manifest $(CARES_OUTDIR)\$(CARES_TARGET).manifest -outputresource:$(CARES_OUTDIR)\$(CARES_TARGET);2
+!   ENDIF
+
+acountry: c-ares acountry.c $(SAMPLESOURCES) $(SAMPLEHEADERS) $(PROG1_OBJDIR) $(PROG1_OBJS) $(PROG1_OUTDIR)
+    $(SPROG_LINK) $(SPROG_LFLAGS) /out:$(PROG1_OUTDIR)\acountry.exe $(PROG1_OBJS)
+    @if exist $(PROG1_OUTDIR)\acountry.exe.manifest mt -nologo -manifest $(PROG1_OUTDIR)\acountry.exe.manifest -outputresource:$(PROG1_OUTDIR)\acountry.exe;1
+
+adig: c-ares adig.c $(SAMPLESOURCES) $(SAMPLEHEADERS) $(PROG2_OBJDIR) $(PROG2_OBJS) $(PROG2_OUTDIR)
+    $(SPROG_LINK) $(SPROG_LFLAGS) /out:$(PROG2_OUTDIR)\adig.exe $(PROG2_OBJS)
+    @if exist $(PROG2_OUTDIR)\adig.exe.manifest mt -nologo -manifest $(PROG2_OUTDIR)\adig.exe.manifest -outputresource:$(PROG2_OUTDIR)\adig.exe;1
+
+ahost: c-ares ahost.c $(SAMPLESOURCES) $(SAMPLEHEADERS) $(PROG3_OBJDIR) $(PROG3_OBJS) $(PROG3_OUTDIR)
+    $(SPROG_LINK) $(SPROG_LFLAGS) /out:$(PROG3_OUTDIR)\ahost.exe $(PROG3_OBJS)
+    @if exist $(PROG3_OUTDIR)\ahost.exe.manifest mt -nologo -manifest $(PROG3_OUTDIR)\ahost.exe.manifest -outputresource:$(PROG3_OUTDIR)\ahost.exe;1
+
+$(CARES_OUTDIR): $(CARES_DIR)
+    @if not exist $(CARES_OUTDIR) mkdir $(CARES_OUTDIR)
+
+$(PROG1_OUTDIR): $(PROG1_DIR)
+    @if not exist $(PROG1_OUTDIR) mkdir $(PROG1_OUTDIR)
+
+$(PROG2_OUTDIR): $(PROG2_DIR)
+    @if not exist $(PROG2_OUTDIR) mkdir $(PROG2_OUTDIR)
+
+$(PROG3_OUTDIR): $(PROG3_DIR)
+    @if not exist $(PROG3_OUTDIR) mkdir $(PROG3_OUTDIR)
+
+$(CARES_OBJDIR): $(CARES_OUTDIR)
+    @if not exist $(CARES_OBJDIR) mkdir $(CARES_OBJDIR)
+
+$(PROG1_OBJDIR): $(PROG1_OUTDIR)
+    @if not exist $(PROG1_OBJDIR) mkdir $(PROG1_OBJDIR)
+
+$(PROG2_OBJDIR): $(PROG2_OUTDIR)
+    @if not exist $(PROG2_OBJDIR) mkdir $(PROG2_OBJDIR)
+
+$(PROG3_OBJDIR): $(PROG3_OUTDIR)
+    @if not exist $(PROG3_OBJDIR) mkdir $(PROG3_OBJDIR)
+
+clean:
+    @-RMDIR /S /Q $(CARES_OUTDIR) >NUL 2>&1
+    @-RMDIR /S /Q $(PROG1_OUTDIR) >NUL 2>&1
+    @-RMDIR /S /Q $(PROG2_OUTDIR) >NUL 2>&1
+    @-RMDIR /S /Q $(PROG3_OUTDIR) >NUL 2>&1
+
+!ENDIF
+
+$(BASE_DIR):
+    @if not exist $(BASE_DIR) mkdir $(BASE_DIR)
+
+$(CARES_DIR): $(BASE_DIR)
+    @if not exist $(CARES_DIR) mkdir $(CARES_DIR)
+
+$(PROG1_DIR): $(BASE_DIR)
+    @if not exist $(PROG1_DIR) mkdir $(PROG1_DIR)
+
+$(PROG2_DIR): $(BASE_DIR)
+    @if not exist $(PROG2_DIR) mkdir $(PROG2_DIR)
+
+$(PROG3_DIR): $(BASE_DIR)
+    @if not exist $(PROG3_DIR) mkdir $(PROG3_DIR)
+
+# End of Makefile.msvc

ares/Makefile.vc6

@@ -1,275 +0,0 @@
-# $Id$
-#
-# C-ares makefile for MSVC6+
-# G. Vanem <gvanem@broadpark.no>.
-#
-
-CFG_MODEL   = MD
-DEBUG_MODEL = d
-USE_WATT32  = 0
-
-#
-# Configurations:
-#  -MD   - msvcrt.dll,  threads, release (normal)
-#  -MDd  - msvcrtd.dll, threads, debug
-#  -ML   - libc, no threads,     release (not available on VC-2008+)
-#  -MLd  - libc, no threads,     debug   (not available on VC-2008+)
-#  -MT   - libc, threads,        release
-#  -MTd  - libc, threads,        debug
-
-CC = cl
-
-CFLAGS  = -nologo -$(CFG_MODEL)$(DEBUG_MODEL) -W3 -Yd -Zi
-LDFLAGS = -machine:i386 -map
-
-OBJ_DIR  = VC6_obj
-DEF_FILE = cares.def
-
-!if "$(USE_WATT32)" == "1"
-CFLAGS  = $(CFLAGS) -UWIN32 -DWATT32 -I$(WATT_ROOT)\inc
-EX_LIBS = $(WATT_ROOT)\lib\wattcpvc_imp.lib
-
-!else
-CFLAGS  = $(CFLAGS) -DWIN32 -DWIN32_LEAN_AND_MEAN
-EX_LIBS = advapi32.lib ws2_32.lib
-!endif
-
-!if "$(DEBUG_MODEL)" == "d"
-CFLAGS  = $(CFLAGS) -DDEBUGBUILD -D_DEBUG -GZ
-LDFLAGS = $(LDFLAGS) -debug -fixed:no
-
-!else
-CFLAGS  = $(CFLAGS) -O2 -Og
-LDFLAGS = $(LDFLAGS) -release
-!endif
-
-CFLAGS  = $(CFLAGS) -I.\.
-
-OBJECTS = $(OBJ_DIR)\ares_fds.obj              \
-          $(OBJ_DIR)\ares_process.obj          \
-          $(OBJ_DIR)\ares_free_hostent.obj     \
-          $(OBJ_DIR)\ares_query.obj            \
-          $(OBJ_DIR)\ares__close_sockets.obj   \
-          $(OBJ_DIR)\ares_free_string.obj      \
-          $(OBJ_DIR)\ares_search.obj           \
-          $(OBJ_DIR)\ares__get_hostent.obj     \
-          $(OBJ_DIR)\ares_gethostbyaddr.obj    \
-          $(OBJ_DIR)\ares_getsock.obj          \
-          $(OBJ_DIR)\ares_send.obj             \
-          $(OBJ_DIR)\ares__read_line.obj       \
-          $(OBJ_DIR)\ares_gethostbyname.obj    \
-          $(OBJ_DIR)\ares_getnameinfo.obj      \
-          $(OBJ_DIR)\ares_strcasecmp.obj       \
-          $(OBJ_DIR)\ares_strerror.obj         \
-          $(OBJ_DIR)\ares_cancel.obj           \
-          $(OBJ_DIR)\ares_init.obj             \
-          $(OBJ_DIR)\ares_library_init.obj     \
-          $(OBJ_DIR)\ares_llist.obj            \
-          $(OBJ_DIR)\ares_timeout.obj          \
-          $(OBJ_DIR)\ares__timeval.obj         \
-          $(OBJ_DIR)\ares_destroy.obj          \
-          $(OBJ_DIR)\ares_mkquery.obj          \
-          $(OBJ_DIR)\ares_version.obj          \
-          $(OBJ_DIR)\ares_expand_name.obj      \
-          $(OBJ_DIR)\ares_parse_a_reply.obj    \
-          $(OBJ_DIR)\ares_parse_aaaa_reply.obj \
-          $(OBJ_DIR)\ares_parse_ns_reply.obj   \
-          $(OBJ_DIR)\ares_parse_srv_reply.obj  \
-          $(OBJ_DIR)\windows_port.obj          \
-          $(OBJ_DIR)\ares_expand_string.obj    \
-          $(OBJ_DIR)\ares_parse_ptr_reply.obj  \
-          $(OBJ_DIR)\ares_writev.obj           \
-          $(OBJ_DIR)\bitncmp.obj               \
-          $(OBJ_DIR)\inet_net_pton.obj         \
-          $(OBJ_DIR)\inet_ntop.obj
-
-all: $(OBJ_DIR) cares.lib cares.dll cares_imp.lib ahost.exe adig.exe acountry.exe
-       @echo Welcome to c-ares library and examples
-
-$(OBJ_DIR):
-       mkdir $(OBJ_DIR)
-
-cares.lib: $(OBJ_DIR) $(OBJECTS)
-       lib -nologo -out:$@ $(OBJECTS)
-
-cares_imp.lib cares.dll: $(OBJ_DIR) $(DEF_FILE) $(OBJECTS)
-       link $(LDFLAGS) -dll -implib:cares_imp.lib -out:cares.dll \
-            -def:$(DEF_FILE) $(OBJECTS) $(EX_LIBS)
-
-$(DEF_FILE): $(OBJECTS) Makefile.VC6
-       @echo ; Generated. DO NOT EDIT  > $@
-       @echo LIBRARY cares.dll        >> $@
-       @echo EXPORTS                  >> $@
-       @echo   ares_cancel            >> $@
-       @echo   ares_destroy           >> $@
-       @echo   ares_expand_name       >> $@
-       @echo   ares_expand_string     >> $@
-       @echo   ares_fds               >> $@
-       @echo   ares_free_hostent      >> $@
-       @echo   ares_free_string       >> $@
-       @echo   ares_gethostbyaddr     >> $@
-       @echo   ares_gethostbyname     >> $@
-       @echo   ares_getsock           >> $@
-       @echo   ares_init              >> $@
-       @echo   ares_init_options      >> $@
-       @echo   ares_library_init      >> $@
-       @echo   ares_library_cleanup   >> $@
-       @echo   ares_mkquery           >> $@
-       @echo   ares_parse_a_reply     >> $@
-       @echo   ares_parse_ptr_reply   >> $@
-       @echo   ares_parse_ns_reply    >> $@
-       @echo   ares_process           >> $@
-       @echo   ares_process_fd        >> $@
-       @echo   ares_query             >> $@
-       @echo   ares_search            >> $@
-       @echo   ares_strerror          >> $@
-       @echo   ares_strncasecmp       >> $@
-       @echo   ares_strcasecmp        >> $@
-       @echo   ares_timeout           >> $@
-       @echo   ares_version           >> $@
-       @echo   ares_inet_net_pton     >> $@
-       @echo   ares_inet_ntop         >> $@
-       @echo   ares_inet_pton         >> $@
-       @echo   ares_getnameinfo       >> $@
-       @echo   ares_parse_aaaa_reply  >> $@
-!if "$(USE_WATT32)" == "0"
-       @echo   ares_writev            >> $@
-!endif
-
-ahost.exe: $(OBJ_DIR) $(OBJ_DIR)\ahost.obj $(OBJ_DIR)\ares_getopt.obj cares_imp.lib
-       link $(LDFLAGS) -out:$@ $(OBJ_DIR)\ahost.obj $(OBJ_DIR)\ares_getopt.obj cares_imp.lib $(EX_LIBS)
-
-adig.exe: $(OBJ_DIR) $(OBJ_DIR)\adig.obj $(OBJ_DIR)\ares_getopt.obj cares_imp.lib
-       link $(LDFLAGS) -out:$@ $(OBJ_DIR)\adig.obj $(OBJ_DIR)\ares_getopt.obj cares_imp.lib $(EX_LIBS)
-
-acountry.exe: $(OBJ_DIR) $(OBJ_DIR)\acountry.obj $(OBJ_DIR)\ares_getopt.obj cares_imp.lib
-       link $(LDFLAGS) -out:$@ $(OBJ_DIR)\acountry.obj $(OBJ_DIR)\ares_getopt.obj cares_imp.lib $(EX_LIBS)
-
-clean:
-       - del $(OBJ_DIR)\*.obj *.ilk *.pdb *.pbt *.pbi *.pbo *._xe *.map
-
-vclean realclean: clean
-       - del $(DEF_FILE) cares.lib cares_imp.* cares.dll
-       - del ahost.exe adig.exe acountry.exe
-       - rd $(OBJ_DIR)
-
-.c{$(OBJ_DIR)}.obj:
-       $(CC) $(CFLAGS) -Fo$*.obj -c $<
-
-#
-# Copyright "gcc -MM .."
-#
-$(OBJ_DIR)\ares_fds.obj: ares_fds.c ares_setup.h setup_once.h ares.h ares_private.h \
-  ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_process.obj: ares_process.c ares_setup.h setup_once.h nameser.h     \
-  ares.h ares_dns.h ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_free_hostent.obj: ares_free_hostent.c ares_setup.h setup_once.h     \
-  ares.h ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_query.obj: ares_query.c ares_setup.h setup_once.h nameser.h         \
-  ares.h ares_dns.h ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares__close_sockets.obj: ares__close_sockets.c ares_setup.h setup_once.h \
-  ares.h ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_free_string.obj: ares_free_string.c ares_setup.h setup_once.h       \
-  ares.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_search.obj: ares_search.c ares_setup.h setup_once.h nameser.h       \
-  ares.h ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares__get_hostent.obj: ares__get_hostent.c ares_setup.h setup_once.h     \
-  ares.h ares_private.h ares_ipv6.h inet_net_pton.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_gethostbyaddr.obj: ares_gethostbyaddr.c ares_setup.h setup_once.h   \
-  nameser.h ares.h ares_private.h ares_ipv6.h inet_net_pton.h ares_build.h     \
-  ares_rules.h
-
-$(OBJ_DIR)\ares_send.obj: ares_send.c ares_setup.h setup_once.h nameser.h ares.h    \
-  ares_dns.h ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares__read_line.obj: ares__read_line.c ares_setup.h setup_once.h ares.h  \
-  ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_gethostbyname.obj: ares_gethostbyname.c ares_setup.h setup_once.h   \
-  nameser.h ares.h ares_private.h ares_ipv6.h inet_net_pton.h bitncmp.h        \
-  ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_strcasecmp.obj: ares_strcasecmp.c ares_setup.h setup_once.h ares.h  \
-  ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_strerror.obj: ares_strerror.c ares_setup.h setup_once.h ares.h      \
-  ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_cancel.obj: ares_cancel.c ares_setup.h setup_once.h ares.h          \
-  ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_init.obj: ares_init.c ares_setup.h setup_once.h nameser.h ares.h    \
-  ares_private.h ares_ipv6.h inet_net_pton.h ares_build.h ares_rules.h         \
-  ares_library_init.h
-
-$(OBJ_DIR)\ares_timeout.obj: ares_timeout.c ares_setup.h setup_once.h ares.h        \
-  ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares__timeval.obj: ares__timeval.c ares_setup.h setup_once.h ares.h      \
-  ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_destroy.obj: ares_destroy.c ares_setup.h setup_once.h ares.h        \
-  ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_mkquery.obj: ares_mkquery.c ares_setup.h setup_once.h nameser.h     \
-  ares.h ares_dns.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_version.obj: ares_version.c ares_setup.h setup_once.h ares.h        \
-  ares_version.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_expand_name.obj: ares_expand_name.c ares_setup.h setup_once.h       \
-  nameser.h ares.h ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_parse_a_reply.obj: ares_parse_a_reply.c ares_setup.h setup_once.h   \
-  nameser.h ares.h ares_dns.h ares_private.h ares_ipv6.h ares_build.h          \
-  ares_rules.h
-
-$(OBJ_DIR)\windows_port.obj: windows_port.c ares_setup.h setup_once.h nameser.h     \
-  ares.h ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_expand_string.obj: ares_expand_string.c ares_setup.h setup_once.h   \
-  nameser.h ares.h ares_private.h ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_parse_ptr_reply.obj: ares_parse_ptr_reply.c ares_setup.h            \
-  setup_once.h nameser.h ares.h ares_dns.h ares_private.h ares_ipv6.h          \
-  ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_parse_aaaa_reply.obj: ares_parse_aaaa_reply.c ares_setup.h          \
-  setup_once.h nameser.h ares.h ares_dns.h inet_net_pton.h ares_private.h      \
-  ares_ipv6.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_parse_ns_reply.obj: ares_parse_ns_reply.c ares_setup.h              \
-  setup_once.h nameser.h ares.h ares_dns.h ares_private.h ares_ipv6.h          \
-  ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_getnameinfo.obj: ares_getnameinfo.c ares_setup.h setup_once.h       \
-  nameser.h ares.h ares_private.h ares_ipv6.h inet_ntop.h ares_build.h         \
-  ares_rules.h
-
-$(OBJ_DIR)\inet_net_pton.obj: inet_net_pton.c ares_setup.h setup_once.h nameser.h   \
-  ares_ipv6.h inet_net_pton.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\bitncmp.obj: bitncmp.c bitncmp.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\inet_ntop.obj: inet_ntop.c ares_setup.h setup_once.h nameser.h           \
-  ares_ipv6.h inet_ntop.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_getopt.obj: ares_getopt.c ares_getopt.h ares_build.h           \
-  ares_rules.h
-
-$(OBJ_DIR)\ares_library_init.obj: ares_library_init.c ares_setup.h setup_once.h     \
-  ares.h ares_private.h ares_library_init.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_llist.obj: ares_llist.c ares_setup.h setup_once.h ares.h            \
-  ares_private.h ares_llist.h ares_build.h ares_rules.h
-
-$(OBJ_DIR)\ares_writev.obj: ares_writev.c ares_setup.h setup_once.h ares.h          \
-  ares_writev.h ares_build.h ares_rules.h

ares/README.cares

@@ -27,7 +27,7 @@ You'll find all c-ares details and news here:
 
 NOTES FOR C-ARES HACKERS
 
-The following notes apply to c-ares version 1.6.1 and later.
+The following notes apply to c-ares version 1.7.0 and later.
 
 * The distributed ares_build.h file is only intended to be used on systems
   which can not run the also distributed configure script.

ares/README.msvc

@@ -0,0 +1,119 @@
+ $Id$
+
+
+                          ___       __ _ _ __ ___  ___ 
+                         / __| ___ / _` | '__/ _ \/ __|
+                        | (_  |___| (_| | | |  __/\__ \
+                         \___|     \__,_|_|  \___||___/
+
+
+                How to build c-ares using MSVC or Visual Studio
+               =================================================
+
+
+
+  How to build using MSVC from the command line
+  ---------------------------------------------
+
+  Open a command prompt window and ensure that the environment is properly
+  set up in order to use MSVC or Visual Studio compiler tools.
+
+  Change to c-ares source folder where Makefile.msvc file is located and run:
+
+  > nmake -f Makefile.msvc
+
+  This will build all c-ares libraries as well as three sample programs.
+
+  Once the above command has finished a new folder named MSVCXX will exist
+  below the folder where makefile.msvc is found. The name of the folder
+  depends on the MSVC compiler version being used to build c-ares.
+
+  Below the MSVCXX folder there will exist four folders named 'cares',
+  'ahost', 'acountry', and 'adig'. The 'cares' folder is the one that
+  holds the c-ares libraries you have just generated, the other three
+  hold sample programs that use the libraries.
+
+  The above command builds four versions of the c-ares library, dynamic
+  and static versions and each one in release and debug flavours. Each
+  of these is found in folders named dll-release, dll-debug, lib-release,
+  and lib-debug, which hang from the 'cares' folder mentioned above. Each
+  sample program also has folders with the same names to reflect which
+  library version it is using.
+
+
+  How to build using Visual Studio 6 IDE
+  --------------------------------------
+
+  A VC++ 6.0 reference workspace (vc6aws.dsw) is available within the 'vc'
+  folder to allow proper building of the library and sample programs.
+
+  1) Open the vc6aws.dsw workspace with MSVC6's IDE.
+  2) Select 'Build' from top menu.
+  3) Select 'Batch Build' from dropdown menu.
+  4) Make sure that the sixteen project configurations are 'checked'.
+  5) Click on the 'Build' button.
+  6) Once the sixteen project configurations are built you are done.
+
+  Dynamic and static c-ares libraries are built in debug and release flavours,
+  and can be located each one in its own subdirectory, dll-debug, dll-release,
+  lib-debug and lib-release, all of them below the 'vc\cares' subdirectory.
+
+  In the same way four executable versions of each sample program are built,
+  each using its respective library. The resulting sample executables are
+  located in its own subdirectory, dll-debug, dll-release, lib-debug and
+  lib-release, below the 'vc\acountry', 'vc\adig' and 'vc\ahost'folders.
+
+  These reference VC++ 6.0 configurations are generated using the dynamic CRT.
+
+
+  How to build using Visual Studio 2003 or newer IDE
+  --------------------------------------------------
+
+  First you have to convert the VC++ 6.0 reference workspace and project files
+  to the Visual Studio IDE version you are using, following next steps:
+
+  1) Open vc\vc6aws.dsw with VS20XX.
+  2) Allow VS20XX to update all projects and workspaces.
+  3) Save ALL and close VS20XX.
+  4) Open vc\vc6aws.sln with VS20XX.
+  5) Select batch build, check 'all' projects and click 'build' button.
+
+  Same comments relative to generated files and folders as done above for
+  Visual Studio 6 IDE apply here.
+
+
+  Relationship between c-ares library file names and versions
+  -----------------------------------------------------------
+
+  c-ares static release library version files:
+
+      libcares.lib -> static release library
+
+  c-ares static debug library version files:
+
+      libcaresd.lib -> static debug library
+
+  c-ares dynamic release library version files:
+
+      cares.dll -> dynamic release library
+      cares.lib -> import library for the dynamic release library
+      cares.exp -> export file for the dynamic release library
+
+  c-ares dynamic debug library version files:
+
+      caresd.dll -> dynamic debug library
+      caresd.lib -> import library for the dynamic debug library
+      caresd.exp -> export file for the dynamic debug library
+      caresd.pdb -> debug symbol file for the dynamic debug library
+
+
+  How to use c-ares static libraries
+  ----------------------------------
+
+  When using the c-ares static library in your program, you will have to
+  define preprocessor symbol CARES_STATICLIB while building your program,
+  otherwise you will get errors at linkage stage.
+
+
+Have Fun!
+ 

ares/RELEASE-NOTES

@@ -1,31 +1,17 @@
-This is what's new and changed in the c-ares 1.7.0 release:
+This is what's new and changed in the c-ares 1.7.1 release:
 
 Changed:
 
- o in6_addr is not used in ares.h anymore, but a private ares_in6_addr is
-   instead declared and used
- o ares_gethostbyname() now supports 'AF_UNSPEC' as a family for resolving
-   either AF_INET6 or AF_INET
- o a build-time configured ares_socklen_t is now used instead of socklen_t
- o new ares_library_init() and ares_library_cleanup() functions
- o new --enable-curldebug configure option
- o ARES_ECANCELLED is now sent as reason for ares_cancel()
- o added ares_parse_srv_reply()
- o added ares_parse_txt_reply()
- o new --enable-symbol-hiding configure option
+ o 
 
 Fixed:
 
- o ares_parse_*_reply() functions now return ARES_EBADRESP instead of
-   ARES_EBADNAME if the name in the response failed to decode
- o only expose/export symbols starting with 'ares_'
- o fix \Device\TCP handle leaks triggered by buggy iphlpapi.dll
- o init without internet gone no longer fails
- o out of bounds memory overwrite triggered with malformed /etc/hosts file
+ o closing of sockets on Windows systems
+ o MSVC deprecated compiler options warnings
+ o ares_process_fd() didn't check broken connections
 
 Thanks go to these friendly people for their efforts and contributions:
 
- Phil Blundell, Japheth Cleaver, Yang Tse, Gregor Jasny, Joshua Kwan,
- Timo Teras, Jakub Hrozek, John Engelhart
+ Ingmar Runge, Laszlo Tamas Szabo, Yang Tse, Tommie Gannert
 
 Have fun!

ares/acountry.c

@@ -199,7 +199,7 @@ int main(int argc, char **argv)
  */
 static void wait_ares(ares_channel channel)
 {
-  while (1)
+  for (;;)
     {
       struct timeval *tvp, tv;
       fd_set read_fds, write_fds;

ares/adig.c

@@ -157,7 +157,6 @@ static const char *opcodes[] = {
   "UPDATEA", "UPDATED", "UPDATEDA", "UPDATEM", "UPDATEMA",
   "ZONEINIT", "ZONEREF"
 };
-  struct in_addr inaddr;
 
 static const char *rcodes[] = {
   "NOERROR", "FORMERR", "SERVFAIL", "NXDOMAIN", "NOTIMP", "REFUSED",
@@ -165,6 +164,8 @@ static const char *rcodes[] = {
   "(unknown)", "(unknown)", "(unknown)", "(unknown)", "NOCHANGE"
 };
 
+static struct in_addr inaddr;
+
 static void callback(void *arg, int status, int timeouts,
                      unsigned char *abuf, int alen);
 static const unsigned char *display_question(const unsigned char *aptr,
@@ -321,7 +322,7 @@ int main(int argc, char **argv)
     }
 
   /* Wait for all queries to complete. */
-  while (1)
+  for (;;)
     {
       FD_ZERO(&read_fds);
       FD_ZERO(&write_fds);

ares/ahost.c

@@ -140,7 +140,7 @@ int main(int argc, char **argv)
     }
 
   /* Wait for all queries to complete. */
-  while (1)
+  for (;;)
     {
       FD_ZERO(&read_fds);
       FD_ZERO(&write_fds);

ares/ares.h

@@ -119,14 +119,14 @@ extern "C" {
 #define ARES_EBADHINTS          20
 
 /* Uninitialized library error code */
-#define ARES_ENOTINITIALIZED    21          /* introduced in 1.6.1 */
+#define ARES_ENOTINITIALIZED    21          /* introduced in 1.7.0 */
 
 /* ares_library_init error codes */
-#define ARES_ELOADIPHLPAPI           22     /* introduced in 1.6.1 */
-#define ARES_EADDRGETNETWORKPARAMS   23     /* introduced in 1.6.1 */
+#define ARES_ELOADIPHLPAPI           22     /* introduced in 1.7.0 */
+#define ARES_EADDRGETNETWORKPARAMS   23     /* introduced in 1.7.0 */
 
 /* More error codes */
-#define ARES_ECANCELLED         24          /* introduced in 1.6.1 */
+#define ARES_ECANCELLED         24          /* introduced in 1.7.0 */
 
 /* Flag values */
 #define ARES_FLAG_USEVC         (1 << 0)
@@ -314,9 +314,9 @@ CARES_EXTERN void ares_destroy(ares_channel channel);
 
 CARES_EXTERN void ares_cancel(ares_channel channel);
 
-void ares_set_socket_callback(ares_channel channel,
-                              ares_sock_create_callback callback,
-                              void *user_data);
+CARES_EXTERN void ares_set_socket_callback(ares_channel channel,
+                                           ares_sock_create_callback callback,
+                                           void *user_data);
 
 CARES_EXTERN void ares_send(ares_channel channel,
                             const unsigned char *qbuf,
@@ -404,10 +404,10 @@ CARES_EXTERN int ares_expand_string(const unsigned char *encoded,
                                     long *enclen);
 
 /*
- * NOTE: before c-ares 1.6.1 we would most often use the system in6_addr
+ * NOTE: before c-ares 1.7.0 we would most often use the system in6_addr
  * struct below when ares itself was built, but many apps would use this
  * private version since the header checked a HAVE_* define for it. Starting
- * with 1.6.1 we always declare and use our own to stop relying on the
+ * with 1.7.0 we always declare and use our own to stop relying on the
  * system's one.
  */
 struct ares_in6_addr {
@@ -416,29 +416,28 @@ struct ares_in6_addr {
   } _S6_un;
 };
 
-/*
- * TODO: the structs 'addrttl' and 'addr6ttl' really should get their names
- * prefixed with ares_ to keep them in our own "name space".
- */
-struct addrttl {
+struct ares_addrttl {
   struct in_addr ipaddr;
   int            ttl;
 };
-struct addr6ttl {
+
+struct ares_addr6ttl {
   struct ares_in6_addr ip6addr;
   int             ttl;
 };
 
 struct ares_srv_reply {
-  unsigned short weight;
-  unsigned short priority;
-  unsigned short port;
-  char *host;
+  struct ares_srv_reply  *next;
+  char                   *host;
+  unsigned short          priority;
+  unsigned short          weight;
+  unsigned short          port;
 };
 
 struct ares_txt_reply {
-  size_t         length;  /* length excludes null termination */
-  unsigned char *txt;
+  struct ares_txt_reply  *next;
+  unsigned char          *txt;
+  size_t                  length;  /* length excludes null termination */
 };
 
 /*
@@ -452,13 +451,13 @@ struct ares_txt_reply {
 CARES_EXTERN int ares_parse_a_reply(const unsigned char *abuf,
                                     int alen,
                                     struct hostent **host,
-                                    struct addrttl *addrttls,
+                                    struct ares_addrttl *addrttls,
                                     int *naddrttls);
 
 CARES_EXTERN int ares_parse_aaaa_reply(const unsigned char *abuf,
                                        int alen,
                                        struct hostent **host,
-                                       struct addr6ttl *addrttls,
+                                       struct ares_addr6ttl *addrttls,
                                        int *naddrttls);
 
 CARES_EXTERN int ares_parse_ptr_reply(const unsigned char *abuf,
@@ -474,18 +473,18 @@ CARES_EXTERN int ares_parse_ns_reply(const unsigned char *abuf,
 
 CARES_EXTERN int ares_parse_srv_reply(const unsigned char* abuf,
                                       int alen,
-                                      struct ares_srv_reply** srv_out,
-                                      int *nsrvreply);
+                                      struct ares_srv_reply** srv_out);
 
 CARES_EXTERN int ares_parse_txt_reply(const unsigned char* abuf,
                                       int alen,
-                                      struct ares_txt_reply** txt_out,
-                                      int *nsrvreply);
+                                      struct ares_txt_reply** txt_out);
 
 CARES_EXTERN void ares_free_string(void *str);
 
 CARES_EXTERN void ares_free_hostent(struct hostent *host);
 
+CARES_EXTERN void ares_free_data(void *dataptr);
+
 CARES_EXTERN const char *ares_strerror(int code);
 
 #ifdef  __cplusplus

ares/ares__read_line.c

@@ -44,7 +44,7 @@ int ares__read_line(FILE *fp, char **buf, size_t *bufsize)
       *bufsize = 128;
     }
 
-  while (1)
+  for (;;)
     {
       if (!fgets(*buf + offset, (int)(*bufsize - offset), fp))
         return (offset != 0) ? 0 : (ferror(fp)) ? ARES_EFILE : ARES_EOF;

ares/ares_cancel.3

@@ -21,7 +21,7 @@ ares_cancel \- Cancel a resolve
 .nf
 .B #include <ares.h>
 .PP
-.B int ares_cancel(ares_channel \fIchannel\fP)
+.B void ares_cancel(ares_channel \fIchannel\fP)
 .fi
 .SH DESCRIPTION
 The \fBares_cancel\fP function cancels all lookups/requests made on the the

ares/ares_data.c

@@ -0,0 +1,143 @@
+/* $Id$ */
+
+/* Copyright (C) 2009 by Daniel Stenberg
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+
+#include "ares_setup.h"
+
+#include <stddef.h>
+
+#include "ares.h"
+#include "ares_data.h"
+#include "ares_private.h"
+
+
+/*
+** ares_free_data() - c-ares external API function.
+**
+** This function must be used by the application to free data memory that
+** has been internally allocated by some c-ares function and for which a
+** pointer has already been returned to the calling application. The list
+** of c-ares functions returning pointers that must be free'ed using this
+** function is:
+**
+**   ares_parse_srv_reply()
+**   ares_parse_txt_reply()
+*/
+
+void ares_free_data(void *dataptr)
+{
+  struct ares_data *ptr;
+
+  if (!dataptr)
+    return;
+
+  ptr = (void *)((char *)dataptr - offsetof(struct ares_data, data));
+
+  if (ptr->mark != ARES_DATATYPE_MARK)
+    return;
+
+  switch (ptr->type)
+    {
+      case ARES_DATATYPE_SRV_REPLY:
+
+        if (ptr->data.srv_reply.next)
+          ares_free_data(ptr->data.srv_reply.next);
+        if (ptr->data.srv_reply.host)
+          free(ptr->data.srv_reply.host);
+        break;
+
+      case ARES_DATATYPE_TXT_REPLY:
+
+        if (ptr->data.txt_reply.next)
+          ares_free_data(ptr->data.txt_reply.next);
+        if (ptr->data.txt_reply.txt)
+          free(ptr->data.txt_reply.txt);
+        break;
+
+      default:
+        return;
+    }
+
+  free(ptr);
+}
+
+
+/*
+** ares_malloc_data() - c-ares internal helper function.
+**
+** This function allocates memory for a c-ares private ares_data struct
+** for the specified ares_datatype, initializes c-ares private fields
+** and zero initializes those which later might be used from the public
+** API. It returns an interior pointer which can be passed by c-ares
+** functions to the calling application, and that must be free'ed using
+** c-ares external API function ares_free_data().
+*/
+
+void *ares_malloc_data(ares_datatype type)
+{
+  struct ares_data *ptr;
+
+  ptr = malloc(sizeof(struct ares_data));
+  if (!ptr)
+    return NULL;
+
+  switch (type)
+    {
+      case ARES_DATATYPE_SRV_REPLY:
+        ptr->data.srv_reply.next = NULL;
+        ptr->data.srv_reply.host = NULL;
+        ptr->data.srv_reply.priority = 0;
+        ptr->data.srv_reply.weight = 0;
+        ptr->data.srv_reply.port = 0;
+        break;
+
+      case ARES_DATATYPE_TXT_REPLY:
+        ptr->data.txt_reply.next = NULL;
+        ptr->data.txt_reply.txt = NULL;
+        ptr->data.txt_reply.length  = 0;
+        break;
+
+      default:
+        free(ptr);
+        return NULL;
+    }
+
+  ptr->mark = ARES_DATATYPE_MARK;
+  ptr->type = type;
+
+  return &ptr->data;
+}
+
+
+/*
+** ares_get_datatype() - c-ares internal helper function.
+**
+** This function returns the ares_datatype of the data stored in a
+** private ares_data struct when given the public API pointer.
+*/
+
+ares_datatype ares_get_datatype(void * dataptr)
+{
+  struct ares_data *ptr;
+
+  ptr = (void *)((char *)dataptr - offsetof(struct ares_data, data));
+
+  if (ptr->mark == ARES_DATATYPE_MARK)
+    return ptr->type;
+
+  return ARES_DATATYPE_UNKNOWN;
+}

ares/ares_data.h

@@ -0,0 +1,62 @@
+/* $Id$ */
+
+/* Copyright (C) 2009 by Daniel Stenberg
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+typedef enum {
+  ARES_DATATYPE_UNKNOWN = 1,  /* unknown data type     - introduced in 1.7.0 */
+  ARES_DATATYPE_SRV_REPLY,    /* struct ares_srv_reply - introduced in 1.7.0 */
+  ARES_DATATYPE_TXT_REPLY,    /* struct ares_txt_reply - introduced in 1.7.0 */
+#if 0
+  ARES_DATATYPE_ADDR6TTL,     /* struct ares_addrttl   */
+  ARES_DATATYPE_ADDRTTL,      /* struct ares_addr6ttl  */
+  ARES_DATATYPE_HOSTENT,      /* struct hostent        */
+  ARES_DATATYPE_OPTIONS,      /* struct ares_options   */
+#endif
+  ARES_DATATYPE_LAST          /* not used              - introduced in 1.7.0 */
+} ares_datatype;
+
+#define ARES_DATATYPE_MARK 0xbead
+
+/*
+ * ares_data struct definition is internal to c-ares and shall not
+ * be exposed by the public API in order to allow future changes
+ * and extensions to it without breaking ABI.  This will be used
+ * internally by c-ares as the container of multiple types of data
+ * dynamically allocated for which a reference will be returned
+ * to the calling application.
+ *
+ * c-ares API functions returning a pointer to c-ares internally
+ * allocated data will actually be returning an interior pointer
+ * into this ares_data struct.
+ *
+ * All this is 'invisible' to the calling application, the only
+ * requirement is that this kind of data must be free'ed by the
+ * calling application using ares_free_data() with the pointer
+ * it has received from a previous c-ares function call.
+ */
+
+struct ares_data {
+  ares_datatype type;  /* Actual data type identifier. */
+  unsigned int  mark;  /* Private ares_data signature. */
+  union {
+    struct ares_txt_reply txt_reply;
+    struct ares_srv_reply srv_reply;
+  } data;
+};
+
+void *ares_malloc_data(ares_datatype type);
+
+ares_datatype ares_get_datatype(void * dataptr);

ares/ares_dup.3

@@ -21,12 +21,12 @@ ares_dup \- Duplicate a resolver channel
 .nf
 .B #include <ares.h>
 .PP
-.B int ares_dup(ares_channel *\fIchannel\fP, ares_channel \fIsource\fP)
+.B int ares_dup(ares_channel *\fIdest\fP, ares_channel \fIsource\fP)
 .fi
 .SH DESCRIPTION
 The \fBares_dup(3)\fP function duplicates an existing communications channel
 for name service lookups.  If it returns successfully, \fBares_dup(3)\fP will
-set the variable pointed to by \fIchannel\fP to a handle used to identify the
+set the variable pointed to by \fIdest\fP to a handle used to identify the
 name service channel.  The caller should invoke \fIares_destroy(3)\fP on the
 handle when the channel is no longer needed.
 

ares/ares_expand_name.3

@@ -14,7 +14,7 @@
 .\" this software for any purpose.  It is provided "as is"
 .\" without express or implied warranty.
 .\"
-.TH ARES_EXPAND_NAME 3 "23 July 1998"
+.TH ARES_EXPAND_NAME 3 "20 Nov 2009"
 .SH NAME
 ares_expand_name \- Expand a DNS-encoded domain name
 .SH SYNOPSIS
@@ -23,7 +23,7 @@ ares_expand_name \- Expand a DNS-encoded domain name
 .PP
 .B int ares_expand_name(const unsigned char *\fIencoded\fP,
 .B      const unsigned char *\fIabuf\fP, int \fIalen\fP, char **\fIs\fP,
-.B 	int *\fIenclen\fP)
+.B 	long *\fIenclen\fP)
 .fi
 .SH DESCRIPTION
 The

ares/ares_expand_string.3

@@ -14,7 +14,7 @@
 .\" this software for any purpose.  It is provided "as is"
 .\" without express or implied warranty.
 .\"
-.TH ARES_EXPAND_NAME 3 "23 July 1998"
+.TH ARES_EXPAND_NAME 3 "20 Nov 2009"
 .SH NAME
 ares_expand_string \- Expand a length encoded string
 .SH SYNOPSIS
@@ -23,7 +23,7 @@ ares_expand_string \- Expand a length encoded string
 .PP
 .B int ares_expand_string(const unsigned char *\fIencoded\fP,
 .B      const unsigned char *\fIabuf\fP, int \fIalen\fP, unsigned char **\fIs\fP,
-.B 	int *\fIenclen\fP)
+.B 	long *\fIenclen\fP)
 .fi
 .SH DESCRIPTION
 The

ares/ares_free_data.3

@@ -0,0 +1,60 @@
+.\" $Id$
+.\"
+.\" Copyright 1998 by the Massachusetts Institute of Technology.
+.\" Copyright (C) 2004-2009 by Daniel Stenberg
+.\"
+.\" Permission to use, copy, modify, and distribute this
+.\" software and its documentation for any purpose and without
+.\" fee is hereby granted, provided that the above copyright
+.\" notice appear in all copies and that both that copyright
+.\" notice and this permission notice appear in supporting
+.\" documentation, and that the name of M.I.T. not be used in
+.\" advertising or publicity pertaining to distribution of the
+.\" software without specific, written prior permission.
+.\" M.I.T. makes no representations about the suitability of
+.\" this software for any purpose.  It is provided "as is"
+.\" without express or implied warranty.
+.\"
+.TH ARES_FREE_DATA 3 "23 Nov 2009"
+.SH NAME
+ares_free_data \- Free data allocated by several c-ares functions
+.SH SYNOPSIS
+.nf
+.B #include <ares.h>
+.PP
+.B void ares_free_data(void *\fIdataptr\fP)
+.PP
+.B cc file.c -lcares
+.fi
+.SH DESCRIPTION
+.PP
+The
+.B ares_free_data(3)
+function frees one or more data structures allocated and returned
+by several c-ares functions. Specifically the data returned by the
+following list of functions must be deallocated using this function.
+.TP 5
+.B ares_parse_srv_reply(3)
+When used to free the data returned by ares_parse_srv_reply(3) this
+will free the whole linked list of ares_srv_reply structures returned
+by ares_parse_srv_reply(3), along with any additional storage
+associated with those structures.
+.TP
+.B ares_parse_txt_reply(3)
+When used to free the data returned by ares_parse_txt_reply(3) this
+will free the whole linked list of ares_txt_reply structures returned
+by ares_parse_txt_reply(3), along with any additional storage
+associated with those structures.
+.SH RETURN VALUE
+The ares_free_data() function does not return a value.
+.SH AVAILABILITY
+This function was first introduced in c-ares version 1.7.0.
+.SH SEE ALSO
+.BR ares_parse_srv_reply(3),
+.BR ares_parse_txt_reply(3)
+.SH AUTHOR
+Yang Tse
+.PP
+Copyright 1998 by the Massachusetts Institute of Technology.
+.br
+Copyright (C) 2004-2009 by Daniel Stenberg.

ares/ares_free_hostent.c

@@ -18,7 +18,7 @@
 #include "ares_setup.h"
 #include <stdlib.h>
 
-#if !defined(WIN32) || defined(WATT32)
+#ifdef HAVE_NETDB_H
 #include <netdb.h>
 #endif
 

ares/ares_gethostbyname_file.3

@@ -21,7 +21,7 @@ ares_gethostbyname_file \- Lookup a name in the system's hosts file
 .nf
 .B #include <ares.h>
 .PP
-.B void ares_gethostbyname_file(ares_channel \fIchannel\fP, const char *\fIname\fP,
+.B int ares_gethostbyname_file(ares_channel \fIchannel\fP, const char *\fIname\fP,
 .B 	int \fIfamily\fP, struct hostent **host)
 .fi
 .SH DESCRIPTION

ares/ares_getnameinfo.c

@@ -61,10 +61,6 @@
 #include "inet_ntop.h"
 #include "ares_private.h"
 
-#ifdef WATT32
-#undef WIN32
-#endif
-
 struct nameinfo_query {
   ares_nameinfo_callback callback;
   void *arg;

ares/ares_getopt.c

@@ -50,9 +50,9 @@
 #include "ares_getopt.h"
 
 int   opterr = 1,     /* if error message should be printed */
-      optind = 1,     /* index into parent argv vector */
-      optopt,         /* character checked for validity */
-      optreset;       /* reset getopt */
+      optind = 1;     /* index into parent argv vector */
+int   optopt = 0;     /* character checked for validity */
+static int optreset;  /* reset getopt */
 char  *optarg;        /* argument associated with option */
 
 #define  BADCH   (int)'?'

ares/ares_getopt.h

@@ -33,15 +33,21 @@
 
 int ares_getopt(int nargc, char * const nargv[], const char *ostr);
 
-#if defined(WATT32)
 #undef optarg
 #undef optind
 #undef opterr
-#endif
+#undef optopt
+#undef optreset
+
+#define optarg   ares_optarg
+#define optind   ares_optind
+#define opterr   ares_opterr
+#define optopt   ares_optopt
+#define optreset ares_optreset
 
 extern char *optarg;
 extern int optind;
 extern int opterr;
-
+extern int optopt;
 
 #endif /* ARES_GETOPT_H */

ares/ares_init.3

@@ -22,8 +22,8 @@ ares_init, ares_init_options \- Initialize a resolver channel
 .nf
 .B #include <ares.h>
 .PP
-.B int ares_init(ares_channel *\fIchannel\fP)
-.B int ares_init_options(ares_channel *\fIchannel\fP,
+.B int ares_init(ares_channel *\fIchannelptr\fP)
+.B int ares_init_options(ares_channel *\fIchannelptr\fP,
 .B 	struct ares_options *\fIoptions\fP, int \fIoptmask\fP)
 .PP
 .B cc file.c -lcares
@@ -31,7 +31,7 @@ ares_init, ares_init_options \- Initialize a resolver channel
 .SH DESCRIPTION
 The \fBares_init\fP function initializes a communications channel for name
 service lookups.  If it returns successfully, \fBares_init\fP will set the
-variable pointed to by \fIchannel\fP to a handle used to identify the name
+variable pointed to by \fIchannelptr\fP to a handle used to identify the name
 service channel.  The caller should invoke
 .BR ares_destroy (3)
 on the handle when the channel is no longer needed.

ares/ares_init.c

@@ -18,7 +18,7 @@
 
 #include "ares_setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
+#ifdef USE_WINSOCK
 #include <iphlpapi.h>
 #endif
 
@@ -581,7 +581,7 @@ static int get_iphlpapi_dns_info (char *ret_buf, size_t ret_size)
   if (!fi)
      return 0;
 
-  res = (*fpGetNetworkParams) (fi, &size);
+  res = (*ares_fpGetNetworkParams) (fi, &size);
   if ((res != ERROR_BUFFER_OVERFLOW) && (res != ERROR_SUCCESS))
      goto quit;
 
@@ -590,7 +590,7 @@ static int get_iphlpapi_dns_info (char *ret_buf, size_t ret_size)
      goto quit;
 
   fi = newfi;
-  res = (*fpGetNetworkParams) (fi, &size);
+  res = (*ares_fpGetNetworkParams) (fi, &size);
   if (res != ERROR_SUCCESS)
      goto quit;
 
@@ -797,7 +797,7 @@ DhcpNameServer
     return ARES_SUCCESS; /* use localhost DNS server */
 
   nservers = i;
-  servers = calloc(sizeof(*servers), i);
+  servers = calloc(i, sizeof(struct server_state));
   if (!servers)
      return ARES_ENOMEM;
 
@@ -1108,11 +1108,19 @@ static int config_domain(ares_channel channel, char *str)
   return set_search(channel, str);
 }
 
+#if defined(__INTEL_COMPILER) && (__INTEL_COMPILER == 910) && \
+    defined(__OPTIMIZE__) && defined(__unix__) &&  defined(__i386__)
+  /* workaround icc 9.1 optimizer issue */
+# define vqualifier volatile
+#else
+# define vqualifier
+#endif
+
 static int config_lookup(ares_channel channel, const char *str,
                          const char *bindch, const char *filech)
 {
   char lookups[3], *l;
-  const char *p;
+  const char *vqualifier p;
 
   /* Set the lookup order.  Only the first letter of each work
    * is relevant, and it has to be "b" for DNS or "f" for the
@@ -1503,9 +1511,9 @@ static void randomize_key(unsigned char* key,int key_data_len)
   int counter=0;
 #ifdef WIN32
   BOOLEAN res;
-  if (fpSystemFunction036)
+  if (ares_fpSystemFunction036)
     {
-      res = (*fpSystemFunction036) (key, key_data_len);
+      res = (*ares_fpSystemFunction036) (key, key_data_len);
       if (res)
         randomized = 1;
     }

ares/ares_library_cleanup.3

@@ -53,16 +53,16 @@ conflict with any other thread that is already using these other libraries.
 Win32/64 application DLLs shall not call \fIares_library_cleanup(3)\fP from
 the DllMain function. Doing so will produce deadlocks and other problems.
 .SH AVAILABILITY
-This function was first introduced in c-ares version 1.6.1 along with the
+This function was first introduced in c-ares version 1.7.0 along with the
 definition of preprocessor symbol \fICARES_HAVE_ARES_LIBRARY_CLEANUP\fP as an
 indication of the availability of this function.
 .PP
 Since the introduction of this function, it is absolutely mandatory to call it
 for any Win32/64 program using c-ares.
 .PP
-Non-Win32/64 systems can still use c-ares version 1.6.1 without calling
-\fIares_library_cleanup(3)\fP due to the fact that it is nearly a do-nothing
-function on non-Win32/64 platforms.
+Non-Win32/64 systems can still use c-ares version 1.7.0 without calling
+\fIares_library_cleanup(3)\fP due to the fact that \fIcurrently\fP it is nearly
+a do-nothing function on non-Win32/64 platforms.
 .SH SEE ALSO
 .BR ares_library_init(3),
 .BR ares_cancel(3)

ares/ares_library_init.3

@@ -76,16 +76,16 @@ non-zero error number will be returned to indicate the error. Except for
 \fIares_strerror(3)\fP, you shall not call any other c-ares function upon
 \fIares_library_init(3)\fP failure.
 .SH AVAILABILITY
-This function was first introduced in c-ares version 1.6.1 along with the
+This function was first introduced in c-ares version 1.7.0 along with the
 definition of preprocessor symbol \fICARES_HAVE_ARES_LIBRARY_INIT\fP as an
 indication of the availability of this function.
 .PP
 Since the introduction of this function it is absolutely mandatory to
 call it for any Win32/64 program using c-ares.
 .PP
-Non-Win32/64 systems can still use c-ares version 1.6.1 without calling
-\fIares_library_init(3)\fP due to the fact that it is nearly a do-nothing
-function on non-Win32/64 platforms at this point.
+Non-Win32/64 systems can still use c-ares version 1.7.0 without calling
+\fIares_library_init(3)\fP due to the fact that \fIcurrently\fP it is nearly
+a do-nothing function on non-Win32/64 platforms at this point.
 .SH SEE ALSO
 .BR ares_library_cleanup(3),
 .BR ares_strerror(3)

ares/ares_library_init.c

@@ -24,9 +24,9 @@
 
 /* library-private global and unique instance vars */
 
-#ifdef WIN32
-fpGetNetworkParams_t fpGetNetworkParams = ZERO_NULL;
-fpSystemFunction036_t fpSystemFunction036 = ZERO_NULL;
+#ifdef USE_WINSOCK
+fpGetNetworkParams_t ares_fpGetNetworkParams = ZERO_NULL;
+fpSystemFunction036_t ares_fpSystemFunction036 = ZERO_NULL;
 #endif
 
 /* library-private global vars with source visibility restricted to this file */
@@ -34,7 +34,7 @@ fpSystemFunction036_t fpSystemFunction036 = ZERO_NULL;
 static unsigned int ares_initialized;
 static int          ares_init_flags;
 
-#ifdef WIN32
+#ifdef USE_WINSOCK
 static HMODULE hnd_iphlpapi;
 static HMODULE hnd_advapi32;
 #endif
@@ -42,16 +42,16 @@ static HMODULE hnd_advapi32;
 
 static int ares_win32_init(void)
 {
-#ifdef WIN32
+#ifdef USE_WINSOCK
 
   hnd_iphlpapi = 0;
   hnd_iphlpapi = LoadLibrary("iphlpapi.dll");
   if (!hnd_iphlpapi)
     return ARES_ELOADIPHLPAPI;
 
-  fpGetNetworkParams = (fpGetNetworkParams_t)
+  ares_fpGetNetworkParams = (fpGetNetworkParams_t)
     GetProcAddress(hnd_iphlpapi, "GetNetworkParams");
-  if (!fpGetNetworkParams)
+  if (!ares_fpGetNetworkParams)
     {
       FreeLibrary(hnd_iphlpapi);
       return ARES_EADDRGETNETWORKPARAMS;
@@ -67,7 +67,7 @@ static int ares_win32_init(void)
   hnd_advapi32 = LoadLibrary("advapi32.dll");
   if (hnd_advapi32)
     {
-      fpSystemFunction036 = (fpSystemFunction036_t)
+      ares_fpSystemFunction036 = (fpSystemFunction036_t)
         GetProcAddress(hnd_advapi32, "SystemFunction036");
     }
 
@@ -78,7 +78,7 @@ static int ares_win32_init(void)
 
 static void ares_win32_cleanup(void)
 {
-#ifdef WIN32
+#ifdef USE_WINSOCK
   if (hnd_advapi32)
     FreeLibrary(hnd_advapi32);
   if (hnd_iphlpapi)
@@ -123,7 +123,7 @@ void ares_library_cleanup(void)
 
 int ares_library_initialized(void)
 {
-#ifdef WIN32
+#ifdef USE_WINSOCK
   if (!ares_initialized)
     return ARES_ENOTINITIALIZED;
 #endif

ares/ares_library_init.h

@@ -21,7 +21,7 @@
 
 #include "ares_setup.h"
 
-#ifdef WIN32
+#ifdef USE_WINSOCK
 
 #include <iphlpapi.h>
 
@@ -31,10 +31,10 @@ typedef BOOLEAN (APIENTRY *fpSystemFunction036_t) (void*, ULONG);
 /* Forward-declaration of variables defined in ares_library_init.c */
 /* that are global and unique instances for whole c-ares library.  */
 
-extern fpGetNetworkParams_t fpGetNetworkParams;
-extern fpSystemFunction036_t fpSystemFunction036;
+extern fpGetNetworkParams_t ares_fpGetNetworkParams;
+extern fpSystemFunction036_t ares_fpSystemFunction036;
 
-#endif /* WIN32 */
+#endif /* USE_WINSOCK */
 
 #endif /* HEADER_CARES_LIBRARY_INIT_H */
 

ares/ares_mkquery.3

@@ -14,7 +14,7 @@
 .\" this software for any purpose.  It is provided "as is"
 .\" without express or implied warranty.
 .\"
-.TH ARES_MKQUERY 3 "4 January 2000"
+.TH ARES_MKQUERY 3 "20 Nov 2009"
 .SH NAME
 ares_mkquery \- Compose a single-question DNS query buffer
 .SH SYNOPSIS
@@ -22,7 +22,7 @@ ares_mkquery \- Compose a single-question DNS query buffer
 .B #include <ares.h>
 .PP
 .B int ares_mkquery(const char *\fIname\fP, int \fIdnsclass\fP, int \fItype\fP,
-.B	unsigned short \fIid\fP, int \fIrd\fP, char **\fIbuf\fP,
+.B	unsigned short \fIid\fP, int \fIrd\fP, unsigned char **\fIbuf\fP,
 .B	int *\fIbuflen\fP)
 .fi
 .SH DESCRIPTION

ares/ares_parse_a_reply.3

@@ -23,7 +23,7 @@ ares_parse_a_reply \- Parse a reply to a DNS query of type A
 .PP
 .B int ares_parse_a_reply(const unsigned char *\fIabuf\fP, int \fIalen\fP,
 .B 	struct hostent **\fIhost\fP,
-.B      struct addrttl *\fIaddrttls\fB, int *\fInaddrttls\fB);
+.B      struct ares_addrttl *\fIaddrttls\fB, int *\fInaddrttls\fB);
 .fi
 .SH DESCRIPTION
 The
@@ -31,7 +31,7 @@ The
 function parses the response to a query of type A into a
 .BR "struct hostent"
 and/or an array of
-.BR "struct addrttls" . 
+.BR "struct ares_addrttls" . 
 The parameters
 .I abuf
 and
@@ -51,7 +51,7 @@ and
 .IR naddrttls
 are both nonnull,
 then up to *naddrttls
-.BR "struct addrttl"
+.BR "struct ares_addrttl"
 records are stored in the array pointed to by addrttls,
 and then *naddrttls is set to the number of records so stored.
 Note that the memory for these records is supplied by the caller.

ares/ares_parse_a_reply.c

@@ -54,7 +54,7 @@
 
 int ares_parse_a_reply(const unsigned char *abuf, int alen,
                        struct hostent **host,
-                       struct addrttl *addrttls, int *naddrttls)
+                       struct ares_addrttl *addrttls, int *naddrttls)
 {
   unsigned int qdcount, ancount;
   int status, i, rr_type, rr_class, rr_len, rr_ttl, naddrs;
@@ -157,7 +157,7 @@ int ares_parse_a_reply(const unsigned char *abuf, int alen,
             }
           if (naddrs < max_addr_ttls)
             {
-              struct addrttl * const at = &addrttls[naddrs];
+              struct ares_addrttl * const at = &addrttls[naddrs];
               if (aptr + sizeof(struct in_addr) > abuf + alen)
               {
                 status = ARES_EBADRESP;

ares/ares_parse_aaaa_reply.3

@@ -14,7 +14,7 @@
 .\" this software for any purpose.  It is provided "as is"
 .\" without express or implied warranty.
 .\"
-.TH ARES_PARSE_AAAA_REPLY 3 "10 March 2005"
+.TH ARES_PARSE_AAAA_REPLY 3 "20 Nov 2009"
 .SH NAME
 ares_parse_aaaa_reply \- Parse a reply to a DNS query of type AAAA
 .SH SYNOPSIS
@@ -23,7 +23,7 @@ ares_parse_aaaa_reply \- Parse a reply to a DNS query of type AAAA
 .PP
 .B int ares_parse_aaaa_reply(const unsigned char *\fIabuf\fP, int \fIalen\fP,
 .B 	struct hostent **\fIhost\fP,         
-.B      struct addrttl *\fIaddrttls\fB, int *\fInaddrttls\fB);
+.B      struct ares_addr6ttl *\fIaddrttls\fB, int *\fInaddrttls\fB);
 .fi
 .SH DESCRIPTION
 The
@@ -31,7 +31,7 @@ The
 function parses the response to a query of type AAAA into a
 .BR "struct hostent"
 and/or an array of
-.BR "struct addrttls" . 
+.BR "struct ares_addr6ttl" . 
 The parameters
 .I abuf
 and
@@ -51,7 +51,7 @@ and
 .IR naddrttls
 are both nonnull,
 then up to *naddrttls
-.BR "struct addr6ttl"
+.BR "struct ares_addr6ttl"
 records are stored in the array pointed to by addrttls,
 and then *naddrttls is set to the number of records so stored.
 Note that the memory for these records is supplied by the caller.

ares/ares_parse_aaaa_reply.c

@@ -55,7 +55,7 @@
 #include "ares_private.h"
 
 int ares_parse_aaaa_reply(const unsigned char *abuf, int alen,
-                          struct hostent **host, struct addr6ttl *addrttls,
+                          struct hostent **host, struct ares_addr6ttl *addrttls,
                           int *naddrttls)
 {
   unsigned int qdcount, ancount;
@@ -157,7 +157,7 @@ int ares_parse_aaaa_reply(const unsigned char *abuf, int alen,
             }
           if (naddrs < max_addr_ttls)
             {
-              struct addr6ttl * const at = &addrttls[naddrs];
+              struct ares_addr6ttl * const at = &addrttls[naddrs];
               if (aptr + sizeof(struct in6_addr) > abuf + alen)
               {
                 status = ARES_EBADRESP;

ares/ares_parse_srv_reply.3

@@ -21,12 +21,13 @@ ares_parse_srv_reply \- Parse a reply to a DNS query of type SRV
 .B #include <ares.h>
 .PP
 .B int ares_parse_srv_reply(const unsigned char* \fIabuf\fP, int \fIalen\fP,
-.B                          struct ares_srv_reply** \fIsrv_out\fP, int *\fInsrvreply\fP);
+.B                          struct ares_srv_reply** \fIsrv_out\fP);
 .fi
 .SH DESCRIPTION
 The
 .B ares_parse_srv_reply
 function parses the response to a query of type SRV into a
+linked list of
 .I struct ares_srv_reply 
 The parameters
 .I abuf
@@ -35,11 +36,10 @@ and
 give the contents of the response.  The result is stored in allocated
 memory and a pointer to it stored into the variable pointed to by
 .IR srv_out .
-The number of responses is stored into the variable pointed to by
-.IR nsrvreply .
 It is the caller's responsibility to free the resulting
 .IR srv_out
-structure when it is no longer needed.
+structure when it is no longer needed using the function
+.B ares_free_data
 .PP
 The structure 
 .I ares_srv_reply
@@ -48,6 +48,7 @@ contains the following fields:
 .in +4n
 .nf
 struct ares_srv_reply {
+    struct ares_srv_reply  *next;
     unsigned short weight;
     unsigned short priority;
     unsigned short port;
@@ -71,7 +72,10 @@ The response did not contain an answer to the query.
 .TP 15
 .B ARES_ENOMEM
 Memory was exhausted.
+.SH AVAILABILITY
+This function was first introduced in c-ares version 1.7.0.
 .SH SEE ALSO
 .BR ares_query (3)
+.BR ares_free_data (3)
 .SH AUTHOR
 Written by Jakub Hrozek <jhrozek@redhat.com>, on behalf of Red Hat, Inc http://www.redhat.com

ares/ares_parse_srv_reply.c

@@ -1,6 +1,7 @@
-/* Id$ */
+/* $Id$ */
 
 /* Copyright 1998 by the Massachusetts Institute of Technology.
+ * Copyright (C) 2009 by Jakub Hrozek <jhrozek@redhat.com>
  *
  * Permission to use, copy, modify, and distribute this
  * software and its documentation for any purpose and without
@@ -15,11 +16,6 @@
  * without express or implied warranty.
  */
 
-/*
- * ares_parse_srv_reply created by Jakub Hrozek <jhrozek@redhat.com>
- *      on behalf of Red Hat - http://www.redhat.com
- */
-
 #include "ares_setup.h"
 
 #ifdef HAVE_SYS_SOCKET_H
@@ -47,6 +43,7 @@
 #include <string.h>
 #include "ares.h"
 #include "ares_dns.h"
+#include "ares_data.h"
 #include "ares_private.h"
 
 /* AIX portability check */
@@ -56,21 +53,20 @@
 
 int
 ares_parse_srv_reply (const unsigned char *abuf, int alen,
-                      struct ares_srv_reply **srv_out, int *nsrvreply)
+                      struct ares_srv_reply **srv_out)
 {
-  unsigned int qdcount, ancount;
-  const unsigned char *aptr;
-  int status, i, rr_type, rr_class, rr_len;
+  unsigned int qdcount, ancount, i;
+  const unsigned char *aptr, *vptr;
+  int status, rr_type, rr_class, rr_len;
   long len;
   char *hostname = NULL, *rr_name = NULL;
-  struct ares_srv_reply *srv = NULL;
+  struct ares_srv_reply *srv_head = NULL;
+  struct ares_srv_reply *srv_last = NULL;
+  struct ares_srv_reply *srv_curr;
 
   /* Set *srv_out to NULL for all failure cases. */
   *srv_out = NULL;
 
-  /* Same with *nsrvreply. */
-  *nsrvreply = 0;
-
   /* Give up if abuf doesn't have room for a header. */
   if (alen < HFIXEDSZ)
     return ARES_EBADRESP;
@@ -96,16 +92,8 @@ ares_parse_srv_reply (const unsigned char *abuf, int alen,
     }
   aptr += len + QFIXEDSZ;
 
-  /* Allocate ares_srv_reply array; ancount gives an upper bound */
-  srv = malloc ((ancount) * sizeof (struct ares_srv_reply));
-  if (!srv)
-    {
-      free (hostname);
-      return ARES_ENOMEM;
-    }
-
   /* Examine each answer resource record (RR) in turn. */
-  for (i = 0; i < (int) ancount; i++)
+  for (i = 0; i < ancount; i++)
     {
       /* Decode the RR up to the data field. */
       status = ares_expand_name (aptr, abuf, alen, &rr_name, &len);
@@ -134,40 +122,59 @@ ares_parse_srv_reply (const unsigned char *abuf, int alen,
               break;
             }
 
-          srv[i].priority = ntohs (*((unsigned short *)aptr));
-          aptr += sizeof(unsigned short);
-          srv[i].weight = ntohs (*((unsigned short *)aptr));
-          aptr += sizeof(unsigned short);
-          srv[i].port = ntohs (*((unsigned short *)aptr));
-          aptr += sizeof(unsigned short);
+          /* Allocate storage for this SRV answer appending it to the list */
+          srv_curr = ares_malloc_data(ARES_DATATYPE_SRV_REPLY);
+          if (!srv_curr)
+            {
+              status = ARES_ENOMEM;
+              break;
+            }
+          if (srv_last)
+            {
+              srv_last->next = srv_curr;
+            }
+          else
+            {
+              srv_head = srv_curr;
+            }
+          srv_last = srv_curr;
 
-          status = ares_expand_name (aptr, abuf, alen, &srv[i].host, &len);
+          vptr = aptr;
+          srv_curr->priority = ntohs (*((unsigned short *)vptr));
+          vptr += sizeof(unsigned short);
+          srv_curr->weight = ntohs (*((unsigned short *)vptr));
+          vptr += sizeof(unsigned short);
+          srv_curr->port = ntohs (*((unsigned short *)vptr));
+          vptr += sizeof(unsigned short);
+
+          status = ares_expand_name (vptr, abuf, alen, &srv_curr->host, &len);
           if (status != ARES_SUCCESS)
             break;
-
-          /* Move on to the next record */
-          aptr += len;
-
-          /* Don't lose memory in the next iteration */
-          free (rr_name);
-          rr_name = NULL;
         }
+
+      /* Don't lose memory in the next iteration */
+      free (rr_name);
+      rr_name = NULL;
+
+      /* Move on to the next record */
+      aptr += rr_len;
     }
 
+  if (hostname)
+    free (hostname);
+  if (rr_name)
+    free (rr_name);
+
   /* clean up on error */
   if (status != ARES_SUCCESS)
     {
-      free (srv);
-      free (hostname);
-      free (rr_name);
+      if (srv_head)
+        ares_free_data (srv_head);
       return status;
     }
 
   /* everything looks fine, return the data */
-  *srv_out = srv;
-  *nsrvreply = ancount;
+  *srv_out = srv_head;
 
-  free (hostname);
-  free (rr_name);
-  return status;
+  return ARES_SUCCESS;
 }

ares/ares_parse_txt_reply.3

@@ -21,12 +21,13 @@ ares_parse_txt_reply \- Parse a reply to a DNS query of type TXT
 .B #include <ares.h>
 .PP
 .B int ares_parse_txt_reply(const unsigned char* \fIabuf\fP, int \fIalen\fP,
-.B                         struct ares_txt_reply **\fItxt_out\fP, int *\fIntxtreply\fP);
+.B                         struct ares_txt_reply **\fItxt_out\fP);
 .fi
 .SH DESCRIPTION
 The
 .B ares_parse_txt_reply
 function parses the response to a query of type TXT into a
+linked list of
 .I struct ares_txt_reply 
 The parameters
 .I abuf
@@ -35,11 +36,10 @@ and
 give the contents of the response.  The result is stored in allocated
 memory and a pointer to it stored into the variable pointed to by
 .IR txt_out .
-The number of responses is stored into the variable pointed to by
-.IR ntxtreply .
 It is the caller's responsibility to free the resulting
 .IR txt_out
-structure when it is no longer needed.
+structure when it is no longer needed using the function
+.B ares_free_data
 .PP
 The structure 
 .I ares_txt_reply
@@ -48,6 +48,7 @@ contains the following fields:
 .in +4n
 .nf
 struct ares_txt_reply {
+  struct ares_txt_reply  *next;
   unsigned int  length;
   unsigned char *txt;
 };
@@ -69,8 +70,11 @@ The response did not contain an answer to the query.
 .TP 15
 .B ARES_ENOMEM
 Memory was exhausted.
+.SH AVAILABILITY
+This function was first introduced in c-ares version 1.7.0.
 .SH SEE ALSO
 .BR ares_query (3)
+.BR ares_free_data (3)
 .SH AUTHOR
 Written by Jakub Hrozek <jhrozek@redhat.com>, on behalf of Red Hat, Inc http://www.redhat.com
 

ares/ares_parse_txt_reply.c

@@ -1,8 +1,7 @@
 /* $Id$ */
 
 /* Copyright 1998 by the Massachusetts Institute of Technology.
- * Copyright (C) 2009 Jakub Hrozek <jhrozek@redhat.com>
- * Copyright (C) 2009 Yang Tse <yangsita@gmail.com>
+ * Copyright (C) 2009 by Jakub Hrozek <jhrozek@redhat.com>
  *
  * Permission to use, copy, modify, and distribute this
  * software and its documentation for any purpose and without
@@ -49,11 +48,12 @@
 
 #include "ares.h"
 #include "ares_dns.h"
+#include "ares_data.h"
 #include "ares_private.h"
 
 int
 ares_parse_txt_reply (const unsigned char *abuf, int alen,
-                      struct ares_txt_reply **txt_out, int *ntxtreply)
+                      struct ares_txt_reply **txt_out)
 {
   size_t substr_len, str_len;
   unsigned int qdcount, ancount, i;
@@ -62,14 +62,13 @@ ares_parse_txt_reply (const unsigned char *abuf, int alen,
   int status, rr_type, rr_class, rr_len;
   long len;
   char *hostname = NULL, *rr_name = NULL;
-  struct ares_txt_reply *txt = NULL;
+  struct ares_txt_reply *txt_head = NULL;
+  struct ares_txt_reply *txt_last = NULL;
+  struct ares_txt_reply *txt_curr;
 
   /* Set *txt_out to NULL for all failure cases. */
   *txt_out = NULL;
 
-  /* Same with *ntxtreply. */
-  *ntxtreply = 0;
-
   /* Give up if abuf doesn't have room for a header. */
   if (alen < HFIXEDSZ)
     return ARES_EBADRESP;
@@ -95,21 +94,6 @@ ares_parse_txt_reply (const unsigned char *abuf, int alen,
     }
   aptr += len + QFIXEDSZ;
 
-  /* Allocate ares_txt_reply array; ancount gives an upper bound */
-  txt = malloc ((ancount) * sizeof (struct ares_txt_reply));
-  if (!txt)
-    {
-      free (hostname);
-      return ARES_ENOMEM;
-    }
-
-  /* Initialize ares_txt_reply array */
-  for (i = 0; i < ancount; i++)
-    {
-      txt[i].txt = NULL;
-      txt[i].length = 0;
-    }
-
   /* Examine each answer resource record (RR) in turn. */
   for (i = 0; i < ancount; i++)
     {
@@ -133,6 +117,23 @@ ares_parse_txt_reply (const unsigned char *abuf, int alen,
       /* Check if we are really looking at a TXT record */
       if (rr_class == C_IN && rr_type == T_TXT)
         {
+          /* Allocate storage for this TXT answer appending it to the list */
+          txt_curr = ares_malloc_data(ARES_DATATYPE_TXT_REPLY);
+          if (!txt_curr)
+            {
+              status = ARES_ENOMEM;
+              break;
+            }
+          if (txt_last)
+            {
+              txt_last->next = txt_curr;
+            }
+          else
+            {
+              txt_head = txt_curr;
+            }
+          txt_last = txt_curr;
+
           /*
            * There may be multiple substrings in a single TXT record. Each
            * substring may be up to 255 characters in length, with a
@@ -146,13 +147,13 @@ ares_parse_txt_reply (const unsigned char *abuf, int alen,
           while (strptr < (aptr + rr_len))
             {
               substr_len = (unsigned char)*strptr;
-              txt[i].length += substr_len;
+              txt_curr->length += substr_len;
               strptr += substr_len + 1;
             }
 
           /* Including null byte */
-          txt[i].txt = malloc (txt[i].length + 1);
-          if (txt[i].txt == NULL)
+          txt_curr->txt = malloc (txt_curr->length + 1);
+          if (txt_curr->txt == NULL)
             {
               status = ARES_ENOMEM;
               break;
@@ -165,20 +166,20 @@ ares_parse_txt_reply (const unsigned char *abuf, int alen,
             {
               substr_len = (unsigned char)*strptr;
               strptr++;
-              memcpy ((char *) txt[i].txt + str_len, strptr, substr_len);
+              memcpy ((char *) txt_curr->txt + str_len, strptr, substr_len);
               str_len += substr_len;
               strptr += substr_len;
             }
           /* Make sure we NULL-terminate */
-          txt[i].txt[txt[i].length] = '\0';
-
-          /* Move on to the next record */
-          aptr += rr_len;
+          *((char *) txt_curr->txt + txt_curr->length) = '\0';
         }
 
       /* Don't lose memory in the next iteration */
       free (rr_name);
       rr_name = NULL;
+
+      /* Move on to the next record */
+      aptr += rr_len;
     }
 
   if (hostname)
@@ -189,17 +190,13 @@ ares_parse_txt_reply (const unsigned char *abuf, int alen,
   /* clean up on error */
   if (status != ARES_SUCCESS)
     {
-    for (i = 0; i < ancount; i++)
-      {
-        if (txt[i].txt)
-          free (txt[i].txt);
-      }
+      if (txt_head)
+        ares_free_data (txt_head);
       return status;
     }
 
   /* everything looks fine, return the data */
-  *txt_out = txt;
-  *ntxtreply = ancount;
+  *txt_out = txt_head;
 
   return ARES_SUCCESS;
 }

ares/ares_private.h

@@ -30,7 +30,7 @@
 #include <stdio.h>
 #include <sys/types.h>
 
-#if !defined(WIN32) || defined(WATT32)
+#ifdef HAVE_NETINET_IN_H
 #include <netinet/in.h>
 #endif
 

ares/ares_process.c

@@ -1,7 +1,7 @@
 /* $Id$ */
 
 /* Copyright 1998 by the Massachusetts Institute of Technology.
- * Copyright (C) 2004-2009 by Daniel Stenberg
+ * Copyright (C) 2004-2010 by Daniel Stenberg
  *
  * Permission to use, copy, modify, and distribute this
  * software and its documentation for any purpose and without
@@ -92,7 +92,7 @@ static void skip_server(ares_channel channel, struct query *query,
                         int whichserver);
 static void next_server(ares_channel channel, struct query *query,
                         struct timeval *now);
-static int configure_socket(int s, ares_channel channel);
+static int configure_socket(ares_socket_t s, ares_channel channel);
 static int open_tcp_socket(ares_channel channel, struct server_state *server);
 static int open_udp_socket(ares_channel channel, struct server_state *server);
 static int same_questions(const unsigned char *qbuf, int qlen,
@@ -139,18 +139,28 @@ long ares__timeoffset(struct timeval *now,
 }
 
 
+/*
+ * generic process function
+ */
+static void processfds(ares_channel channel,
+                       fd_set *read_fds, ares_socket_t read_fd,
+                       fd_set *write_fds, ares_socket_t write_fd)
+{
+  struct timeval now = ares__tvnow();
+
+  write_tcp_data(channel, write_fds, write_fd, &now);
+  read_tcp_data(channel, read_fds, read_fd, &now);
+  read_udp_packets(channel, read_fds, read_fd, &now);
+  process_timeouts(channel, &now);
+  process_broken_connections(channel, &now);
+}
+
 /* Something interesting happened on the wire, or there was a timeout.
  * See what's up and respond accordingly.
  */
 void ares_process(ares_channel channel, fd_set *read_fds, fd_set *write_fds)
 {
-  struct timeval now = ares__tvnow();
-
-  write_tcp_data(channel, write_fds, ARES_SOCKET_BAD, &now);
-  read_tcp_data(channel, read_fds, ARES_SOCKET_BAD, &now);
-  read_udp_packets(channel, read_fds, ARES_SOCKET_BAD, &now);
-  process_timeouts(channel, &now);
-  process_broken_connections(channel, &now);
+  processfds(channel, read_fds, ARES_SOCKET_BAD, write_fds, ARES_SOCKET_BAD);
 }
 
 /* Something interesting happened on the wire, or there was a timeout.
@@ -161,12 +171,7 @@ void ares_process_fd(ares_channel channel,
                                                file descriptors */
                      ares_socket_t write_fd)
 {
-  struct timeval now = ares__tvnow();
-
-  write_tcp_data(channel, NULL, write_fd, &now);
-  read_tcp_data(channel, NULL, read_fd, &now);
-  read_udp_packets(channel, NULL, read_fd, &now);
-  process_timeouts(channel, &now);
+  processfds(channel, NULL, read_fd, NULL, write_fd);
 }
 
 
@@ -174,7 +179,8 @@ void ares_process_fd(ares_channel channel,
  * otherwise. This is mostly for HP-UX, which could return EAGAIN or
  * EWOULDBLOCK. See this man page
  *
- *      http://devrsrc1.external.hp.com/STKS/cgi-bin/man2html?manpage=/usr/share/man/man2.Z/send.2
+ * http://devrsrc1.external.hp.com/STKS/cgi-bin/man2html?
+ *     manpage=/usr/share/man/man2.Z/send.2
  */
 static int try_again(int errnum)
 {
@@ -732,7 +738,7 @@ void ares__send_query(ares_channel channel, struct query *query,
               return;
             }
         }
-      sendreq = calloc(sizeof(struct send_request), 1);
+      sendreq = calloc(1, sizeof(struct send_request));
       if (!sendreq)
         {
         end_query(channel, query, ARES_ENOMEM, NULL, 0);
@@ -802,8 +808,9 @@ void ares__send_query(ares_channel channel, struct query *query,
 }
 
 /*
- * setsocknonblock sets the given socket to either blocking or non-blocking mode
- * based on the 'nonblock' boolean argument. This function is highly portable.
+ * setsocknonblock sets the given socket to either blocking or non-blocking
+ * mode based on the 'nonblock' boolean argument. This function is highly
+ * portable.
  */
 static int setsocknonblock(ares_socket_t sockfd,    /* operate on this */
                     int nonblock   /* TRUE or FALSE */)
@@ -856,7 +863,7 @@ static int setsocknonblock(ares_socket_t sockfd,    /* operate on this */
 #endif
 }
 
-static int configure_socket(int s, ares_channel channel)
+static int configure_socket(ares_socket_t s, ares_channel channel)
 {
   setsocknonblock(s, TRUE);
 
@@ -902,10 +909,10 @@ static int open_tcp_socket(ares_channel channel, struct server_state *server)
 
 #ifdef TCP_NODELAY
   /*
-   * Disable the Nagle algorithm (only relevant for TCP sockets, and thus not in
-   * configure_socket). In general, in DNS lookups we're pretty much interested
-   * in firing off a single request and then waiting for a reply, so batching
-   * isn't very interesting in general.
+   * Disable the Nagle algorithm (only relevant for TCP sockets, and thus not
+   * in configure_socket). In general, in DNS lookups we're pretty much
+   * interested in firing off a single request and then waiting for a reply,
+   * so batching isn't very interesting in general.
    */
   opt = 1;
   if (setsockopt(s, IPPROTO_TCP, TCP_NODELAY,

ares/ares_save_options.3

@@ -21,7 +21,7 @@ ares_save_options \- Save configuration values obtained from initialized ares_ch
 .nf
 .B #include <ares.h>
 .PP
-.B void ares_save_options(ares_channel \fIchannel\fP, struct ares_options *\fIoptions\fP, int *\fIoptmask\fP)
+.B int ares_save_options(ares_channel \fIchannel\fP, struct ares_options *\fIoptions\fP, int *\fIoptmask\fP)
 .fi
 .SH DESCRIPTION
 The \fBares_save_options(3)\fP function saves the channel data identified by
@@ -36,6 +36,20 @@ The resultant options and optmask are then able to be
 passed directly to ares_init_options.  When the options
 are no longer needed, ares_destroy_options should be called
 to free any associated memory.
+.SH RETURN VALUES
+.B ares_save_options(3)
+can return any of the following values:
+.TP 15
+.B ARES_SUCCESS
+The channel data was successfuly stored
+.TP 15
+.B ARES_ENOMEM
+The memory was exhausted
+.TP 15
+.B ARES_ENODATA
+The channel data identified by 
+.IR channel
+were invalid.
 .SH NOTE
 Since c-ares 1.6.0 the ares_options struct has been "locked" meaning that it
 won't be extended to cover new funtions. This function will remain

ares/ares_set_socket_callback.3

@@ -1,15 +1,20 @@
 .\" $Id$
 .\"
-.TH ARES_SET_SOCKET_CALLBACK 3 "2 Dec 2008"
+.TH ARES_SET_SOCKET_CALLBACK 3 "20 Nov 2009"
 .SH NAME
 ares_set_socket_callback \- Set a socket creation callback
 .SH SYNOPSIS
 .nf
-int ares_set_socket_callback(ares_channel \fIchannel\fP,
+.B #include <ares.h>
+.PP
+.B void ares_set_socket_callback(ares_channel \fIchannel\fP,
                              ares_sock_create_callback \fIcallback\fP,
                              void *\fIuserdata\fP)
+.PP
+.B cc file.c -lcares
 .fi
 .SH DESCRIPTION
+.PP
 This function sets a \fIcallback\fP in the given ares channel handle. This
 callback function will be invoked after the socket has been created, and
 connected to the remote server. The callback must return ARES_SUCCESS if

ares/ares_setup.h

@@ -48,6 +48,17 @@
 /* system header files in our config files, avoid this at any cost. */
 /* ================================================================ */
 
+/*
+ * AIX 4.3 and newer needs _THREAD_SAFE defined to build
+ * proper reentrant code. Others may also need it.
+ */
+
+#ifdef NEED_THREAD_SAFE
+#  ifndef _THREAD_SAFE
+#    define _THREAD_SAFE
+#  endif
+#endif
+
 /*
  * Tru64 needs _REENTRANT set for a few function prototypes and
  * things to appear in the system header files. Unixware needs it

ares/ares_timeout.3

@@ -22,7 +22,7 @@ ares_fds \- Get file descriptors to select on for name service
 .B #include <ares.h>
 .PP
 .B struct timeval *ares_timeout(ares_channel \fIchannel\fP,
-.B	struct timeval *\fImaxtv\fP, struct timeval *\fItvbuf\fP)
+.B	struct timeval *\fImaxtv\fP, struct timeval *\fItv\fP)
 .fi
 .SH DESCRIPTION
 The
@@ -33,13 +33,13 @@ invoking \fIares_process(3)\fP to process timeouts.  The parameter
 specifies a existing maximum timeout, or
 .B NULL
 if the caller does not wish to apply a maximum timeout.  The parameter
-.I tvbuf
+.I tv
 must point to a writable buffer of type
 .BR "struct timeval" .
 It is valid for
 .I maxtv
 and
-.I tvbuf
+.I tv
 to have the same value.
 .PP
 If no queries have timeouts pending sooner than the given maximum
@@ -50,9 +50,9 @@ returns the value of
 otherwise
 .B ares_timeout
 stores the appropriate timeout value into the buffer pointed to by
-.I tvbuf
+.I tv
 and returns the value of
-.IR tvbuf .
+.IR tv .
 .SH SEE ALSO
 .BR ares_fds (3),
 .BR ares_process (3)

ares/ares_version.h

@@ -4,14 +4,14 @@
 #define ARES__VERSION_H
 
 #define ARES_VERSION_MAJOR 1
-#define ARES_VERSION_MINOR 6
+#define ARES_VERSION_MINOR 7
 #define ARES_VERSION_PATCH 1
 #define ARES_VERSION ((ARES_VERSION_MAJOR<<16)|\
                        (ARES_VERSION_MINOR<<8)|\
                        (ARES_VERSION_PATCH))
-#define ARES_VERSION_STR "1.6.1-CVS"
+#define ARES_VERSION_STR "1.7.1-CVS"
 
-#if (ARES_VERSION >= 0x010601)
+#if (ARES_VERSION >= 0x010700)
 #  define CARES_HAVE_ARES_LIBRARY_INIT 1
 #  define CARES_HAVE_ARES_LIBRARY_CLEANUP 1
 #else

ares/buildconf

@@ -1,7 +1,5 @@
 #!/bin/sh
 
-# The logic for finding the right libtoolize is taken from libcurl's buildconf
-
 #--------------------------------------------------------------------------
 # findtool works as 'which' but we use a different name to make it more
 # obvious we aren't using 'which'! ;-)
@@ -22,6 +20,37 @@ findtool(){
   IFS=$old_IFS
 }
 
+#--------------------------------------------------------------------------
+# removethis() removes all files and subdirectories with the given name,
+# inside and below the current subdirectory at invocation time.
+#
+removethis(){
+  if test "$#" = "1"; then
+    find . -depth -name $1 -print > buildconf.tmp.$$
+    while read fdname
+    do
+      if test -f "$fdname"; then
+        rm -f "$fdname"
+      elif test -d "$fdname"; then
+        rm -f -r "$fdname"
+      fi
+    done < buildconf.tmp.$$
+    rm -f buildconf.tmp.$$
+  fi
+}
+
+#--------------------------------------------------------------------------
+# Ensure that buildconf runs from the subdirectory where configure.ac lives
+#
+if test ! -f configure.ac ||
+  test ! -f ares_init.c ||
+  test ! -f m4/cares-functions.m4; then
+  echo "Can not run buildconf from outside of c-ares source subdirectory!"
+  echo "Change to the subdirectory where buildconf is found, and try again."
+  exit 1
+fi
+
+#--------------------------------------------------------------------------
 # this approach that tries 'glibtool' first is some kind of work-around for
 # some BSD-systems I believe that use to provide the GNU libtool named
 # glibtool, with 'libtool' being something completely different.
@@ -38,6 +67,49 @@ else
   libtoolize=`findtool $LIBTOOLIZE`
 fi
 
+#--------------------------------------------------------------------------
+# Remove files generated on previous buildconf/configure run.
+#
+for fname in .deps \
+    .libs \
+    *.la \
+    *.lo \
+    *.a \
+    *.o \
+    Makefile \
+    Makefile.in \
+    aclocal.m4 \
+    aclocal.m4.bak \
+    ares_build.h \
+    ares_config.h \
+    ares_config.h.in \
+    autom4te.cache \
+    compile \
+    config.guess \
+    config.log \
+    config.lt \
+    config.status \
+    config.sub \
+    configure \
+    depcomp \
+    libcares.pc \
+    libtool \
+    libtool.m4 \
+    ltmain.sh \
+    ltoptions.m4 \
+    ltsugar.m4 \
+    ltversion.m4 \
+    lt~obsolete.m4 \
+    missing \
+    stamp-h1 \
+    stamp-h2 ; do
+  removethis "$fname"
+done
+
+#--------------------------------------------------------------------------
+# run the correct scripts now
+#
+
 ${libtoolize} --copy --automake --force
 ${ACLOCAL:-aclocal} -I m4 $ACLOCAL_FLAGS
 ${AUTOHEADER:-autoheader}

ares/cares.rc

@@ -41,10 +41,17 @@ BEGIN
     BLOCK "040904b0"
     BEGIN
       VALUE "CompanyName",      "The c-ares library, http://c-ares.haxx.se/\0"
+#if defined(DEBUGBUILD) || defined(_DEBUG)
+      VALUE "FileDescription",  "c-ares Debug Shared Library\0"
+      VALUE "FileVersion",      ARES_VERSION_STR "\0"
+      VALUE "InternalName",     "c-ares\0"
+      VALUE "OriginalFilename", "caresd.dll\0"
+#else
       VALUE "FileDescription",  "c-ares Shared Library\0"
       VALUE "FileVersion",      ARES_VERSION_STR "\0"
       VALUE "InternalName",     "c-ares\0"
       VALUE "OriginalFilename", "cares.dll\0"
+#endif
       VALUE "ProductName",      "The c-ares library\0"
       VALUE "ProductVersion",   ARES_VERSION_STR "\0"
       VALUE "LegalCopyright",   "<22> 2004 - 2009 Daniel Stenberg, <daniel@haxx.se>.\0"

ares/config-win32.h

@@ -85,6 +85,9 @@
 /*                             FUNCTIONS                            */
 /* ---------------------------------------------------------------- */
 
+/* Define if you have the closesocket function.  */
+#define HAVE_CLOSESOCKET 1
+
 /* Define if you have the gethostname function.  */
 #define HAVE_GETHOSTNAME 1
 

ares/configure.ac

@@ -60,6 +60,11 @@ if test -z "$AR" || test "$AR" = "not_found"; then
 fi
 AC_SUBST([AR])
 
+dnl Remove non-configure distributed ares_build.h
+if test -f ${srcdir}/ares_build.h; then
+  rm -f ${srcdir}/ares_build.h
+fi
+
 dnl Fetch c-ares version from ares_version.h
 VERSION=`$SED -ne 's/^#define ARES_VERSION_STR "\(.*\)"/\1/p' ${srcdir}/ares_version.h`
 AM_INIT_AUTOMAKE([c-ares], [$VERSION])
@@ -82,6 +87,7 @@ dnl This defines _ALL_SOURCE for AIX
 CARES_CHECK_AIX_ALL_SOURCE
 
 dnl Our configure and build reentrant settings
+CARES_CONFIGURE_THREAD_SAFE
 CARES_CONFIGURE_REENTRANT
 
 dnl check for how to do large files
@@ -108,6 +114,17 @@ case $host in
     ;;
 esac
 
+AC_MSG_CHECKING([if compiler is icc (to build with PIC)])
+case $CC in
+  icc | */icc)
+    AC_MSG_RESULT([yes])
+    with_pic=yes
+    ;;
+  *)
+    AC_MSG_RESULT([no])
+    ;;
+esac
+
 dnl libtool setup
 AC_PROG_LIBTOOL
 
@@ -140,27 +157,17 @@ CARES_SET_COMPILER_DEBUG_OPTS
 CARES_SET_COMPILER_OPTIMIZE_OPTS
 CARES_SET_COMPILER_WARNING_OPTS
 
-case $host in
+if test "$compiler_id" = "INTEL_UNIX_C"; then
   #
-  x86_64*linux*|amd64*freebsd*|ia64*freebsd*)
-    #
-    if test "$compiler_id" = "INTEL_UNIX_C"; then
-      #
-      if test "$compiler_num" -ge "900" &&
-        test "$compiler_num" -lt "1000"; then
-        dnl icc 9.X specific
-        CFLAGS="$CFLAGS -i-dynamic"
-      fi
-      #
-      if test "$compiler_num" -ge "1000"; then
-        dnl icc 10.X or later
-        CFLAGS="$CFLAGS -shared-intel"
-      fi
-      #
-    fi
-    ;;
+  if test "$compiler_num" -ge "1000"; then
+    dnl icc 10.X or later
+    CFLAGS="$CFLAGS -shared-intel"
+  elif test "$compiler_num" -ge "900"; then
+    dnl icc 9.X specific
+    CFLAGS="$CFLAGS -i-dynamic"
+  fi
   #
-esac
+fi
 
 CARES_CHECK_COMPILER_HALT_ON_ERROR
 CARES_CHECK_COMPILER_ARRAY_SIZE_NEGATIVE
@@ -381,58 +388,10 @@ AC_HELP_STRING([--enable-libgcc],[use libgcc when linking]),
 )
 
 
-dnl Default is to try the thread-safe versions of a few functions
-OPT_THREAD=on
-
-dnl detect AIX 4.3 or later
-AC_MSG_CHECKING([AIX 4.3 or later])
-AC_PREPROC_IFELSE([
-#if defined(_AIX) && defined(_AIX43)
-printf("just fine");
-#else
-#error "this is not AIX 4.3 or later"
-#endif
-],
- [ AC_MSG_RESULT([yes])
-   RECENTAIX=yes
-   OPT_THREAD=off ],
- [ AC_MSG_RESULT([no]) ]
-)
-
-AC_ARG_ENABLE(thread,dnl
-AC_HELP_STRING([--disable-thread],[don't look for thread-safe functions])
-AC_HELP_STRING([--enable-thread],[look for thread-safe functions]),
-[ case "$enableval" in
-  no)
-    OPT_THREAD=off
-    AC_MSG_WARN(c-ares will not get built using thread-safe functions)
-    ;;
-  *)
-    ;;
-  esac
-]
-)
-
-if test X"$OPT_THREAD" = Xoff
-then
-  AC_DEFINE(DISABLED_THREADSAFE, 1,
-    [Set to explicitly specify we don't want to use thread-safe functions])
-fi
-
-dnl for recent AIX versions, we skip all the thread-safe checks above since
-dnl they claim a thread-safe libc using the standard API. But there are
-dnl some functions still not thread-safe. Check for these!
-
 dnl Let's hope this split URL remains working:
 dnl http://publibn.boulder.ibm.com/doc_link/en_US/a_doc_lib/aixprggd/ \
 dnl genprogc/thread_quick_ref.htm
 
-if test "x$RECENTAIX" = "xyes"; then
-
-  AC_DEFINE(_THREAD_SAFE, 1, [define this if you need it to compile thread-safe code])
-
-fi
-
 
 dnl **********************************************************************
 dnl Back to "normal" configuring
@@ -453,6 +412,7 @@ AC_CHECK_HEADERS(
        sys/ioctl.h \
        sys/param.h \
        sys/uio.h \
+       assert.h \
        netdb.h \
        netinet/in.h \
        netinet/tcp.h \

ares/m4/cares-compilers.m4

@@ -16,7 +16,7 @@
 #***************************************************************************
 
 # File version for 'aclocal' use. Keep it a single number.
-# serial 61
+# serial 63
 
 
 dnl CARES_CHECK_COMPILER
@@ -1340,9 +1340,20 @@ AC_DEFUN([CARES_CHECK_COMPILER_SYMBOL_HIDING], [
       dnl Only icc 9.0 or later
       if test "$compiler_num" -ge "900"; then
         if $CC --help --verbose 2>&1 | grep fvisibility= > /dev/null ; then
-          tmp_EXTERN="__attribute__ ((visibility (\"default\")))"
-          tmp_CFLAGS="-fvisibility=hidden"
-          supports_symbol_hiding="yes"
+          tmp_save_CFLAGS="$CFLAGS"
+          CFLAGS="$CFLAGS -fvisibility=hidden"
+          AC_LINK_IFELSE([
+            AC_LANG_PROGRAM([[
+#             include <stdio.h>
+            ]],[[
+              printf("icc fvisibility bug test");
+            ]])
+          ],[
+            tmp_EXTERN="__attribute__ ((visibility (\"default\")))"
+            tmp_CFLAGS="-fvisibility=hidden"
+            supports_symbol_hiding="yes"
+          ])
+          CFLAGS="$tmp_save_CFLAGS"
         fi
       fi
       ;;

ares/m4/cares-functions.m4

@@ -16,7 +16,7 @@
 #***************************************************************************
 
 # File version for 'aclocal' use. Keep it a single number.
-# serial 32
+# serial 39
 
 
 dnl CARES_INCLUDES_ARPA_INET
@@ -873,7 +873,10 @@ dnl Verify if getaddrinfo is available, prototyped, can
 dnl be compiled and seems to work. If all of these are
 dnl true, and usage has not been previously disallowed
 dnl with shell variable cares_disallow_getaddrinfo, then
-dnl HAVE_GETADDRINFO will be defined.
+dnl HAVE_GETADDRINFO will be defined. Additionally when
+dnl HAVE_GETADDRINFO gets defined this will also attempt
+dnl to find out if getaddrinfo happens to be threadsafe,
+dnl defining HAVE_GETADDRINFO_THREADSAFE when true.
 
 AC_DEFUN([CARES_CHECK_FUNC_GETADDRINFO], [
   AC_REQUIRE([CARES_INCLUDES_WS2TCPIP])dnl
@@ -887,6 +890,7 @@ AC_DEFUN([CARES_CHECK_FUNC_GETADDRINFO], [
   tst_compi_getaddrinfo="unknown"
   tst_works_getaddrinfo="unknown"
   tst_allow_getaddrinfo="unknown"
+  tst_tsafe_getaddrinfo="unknown"
   #
   AC_MSG_CHECKING([if getaddrinfo can be linked])
   AC_LINK_IFELSE([
@@ -1001,6 +1005,82 @@ AC_DEFUN([CARES_CHECK_FUNC_GETADDRINFO], [
   else
     AC_MSG_RESULT([no])
     ac_cv_func_getaddrinfo="no"
+    ac_cv_func_getaddrinfo_threadsafe="no"
+  fi
+  #
+  if test "$ac_cv_func_getaddrinfo" = "yes"; then
+    AC_MSG_CHECKING([if getaddrinfo is threadsafe])
+    case $host_os in
+      aix[[1234]].* | aix5.[[01]].*)
+        dnl aix 5.1 and older
+        tst_tsafe_getaddrinfo="no"
+        ;;
+      aix*)
+        dnl aix 5.2 and newer
+        tst_tsafe_getaddrinfo="yes"
+        ;;
+      darwin[[12345]].*)
+        dnl darwin 5.0 and mac os x 10.1.X and older
+        tst_tsafe_getaddrinfo="no"
+        ;;
+      darwin*)
+        dnl darwin 6.0 and mac os x 10.2.X and newer
+        tst_tsafe_getaddrinfo="yes"
+        ;;
+      freebsd[[1234]].* | freebsd5.[[1234]]*)
+        dnl freebsd 5.4 and older
+        tst_tsafe_getaddrinfo="no"
+        ;;
+      freebsd*)
+        dnl freebsd 5.5 and newer
+        tst_tsafe_getaddrinfo="yes"
+        ;;
+      hpux[[123456789]].* | hpux10.* | hpux11.0* | hpux11.10*)
+        dnl hpux 11.10 and older
+        tst_tsafe_getaddrinfo="no"
+        ;;
+      hpux*)
+        dnl hpux 11.11 and newer
+        tst_tsafe_getaddrinfo="yes"
+        ;;
+      netbsd[[123]].*)
+        dnl netbsd 3.X and older
+        tst_tsafe_getaddrinfo="no"
+        ;;
+      netbsd*)
+        dnl netbsd 4.X and newer
+        tst_tsafe_getaddrinfo="yes"
+        ;;
+      *bsd*)
+        dnl All other bsd's
+        tst_tsafe_getaddrinfo="no"
+        ;;
+      solaris2*)
+        dnl solaris which have it
+        tst_tsafe_getaddrinfo="yes"
+        ;;
+    esac
+    if test "$tst_tsafe_getaddrinfo" = "unknown"; then
+      CURL_CHECK_DEF_CC([h_errno], [
+        $cares_includes_ws2tcpip
+        $cares_includes_sys_socket
+        $cares_includes_netdb
+        ], [silent])
+      if test "$curl_cv_have_def_h_errno" = "no"; then
+        tst_tsafe_getaddrinfo="no"
+      fi
+    fi
+    if test "$tst_tsafe_getaddrinfo" = "unknown"; then
+      tst_tsafe_getaddrinfo="yes"
+    fi
+    AC_MSG_RESULT([$tst_tsafe_getaddrinfo])
+    if test "$tst_tsafe_getaddrinfo" = "yes"; then
+      AC_DEFINE_UNQUOTED(HAVE_GETADDRINFO_THREADSAFE, 1,
+        [Define to 1 if the getaddrinfo function is threadsafe.])
+      ac_cv_func_getaddrinfo_threadsafe="yes"
+    else
+      ac_cv_func_getaddrinfo_threadsafe="no"
+    fi
   fi
 ])
 

ares/m4/cares-reentrant.m4

@@ -422,8 +422,8 @@ dnl must be unconditionally done for this platform.
 dnl Internal macro for CARES_CONFIGURE_REENTRANT.
 
 AC_DEFUN([CARES_CHECK_NEED_REENTRANT_SYSTEM], [
-  case $host in
-    *-*-solaris*)
+  case $host_os in
+    solaris*)
       tmp_need_reentrant="yes"
       ;;
     *)
@@ -433,6 +433,29 @@ AC_DEFUN([CARES_CHECK_NEED_REENTRANT_SYSTEM], [
 ])
 
 
+dnl CARES_CHECK_NEED_THREAD_SAFE_SYSTEM
+dnl -------------------------------------------------
+dnl Checks if the preprocessor _THREAD_SAFE definition
+dnl must be unconditionally done for this platform.
+dnl Internal macro for CARES_CONFIGURE_THREAD_SAFE.
+
+AC_DEFUN([CARES_CHECK_NEED_THREAD_SAFE_SYSTEM], [
+  case $host_os in
+    aix[[123]].* | aix4.[[012]].*)
+      dnl aix 4.2 and older
+      tmp_need_thread_safe="no"
+      ;;
+    aix*)
+      dnl AIX 4.3 and newer
+      tmp_need_thread_safe="yes"
+      ;;
+    *)
+      tmp_need_thread_safe="no"
+      ;;
+  esac
+])
+
+
 dnl CARES_CONFIGURE_FROM_NOW_ON_WITH_REENTRANT
 dnl -------------------------------------------------
 dnl This macro ensures that configuration tests done
@@ -453,6 +476,26 @@ _EOF
 ])
 
 
+dnl CARES_CONFIGURE_FROM_NOW_ON_WITH_THREAD_SAFE
+dnl -------------------------------------------------
+dnl This macro ensures that configuration tests done
+dnl after this will execute with preprocessor symbol
+dnl _THREAD_SAFE defined. This macro also ensures that
+dnl the generated config file defines NEED_THREAD_SAFE
+dnl and that in turn setup.h will define _THREAD_SAFE.
+dnl Internal macro for CARES_CONFIGURE_THREAD_SAFE.
+
+AC_DEFUN([CARES_CONFIGURE_FROM_NOW_ON_WITH_THREAD_SAFE], [
+AC_DEFINE(NEED_THREAD_SAFE, 1,
+  [Define to 1 if _THREAD_SAFE preprocessor symbol must be defined.])
+cat >>confdefs.h <<_EOF
+#ifndef _THREAD_SAFE
+#  define _THREAD_SAFE
+#endif
+_EOF
+])
+
+
 dnl CARES_CONFIGURE_REENTRANT
 dnl -------------------------------------------------
 dnl This first checks if the preprocessor _REENTRANT
@@ -513,3 +556,56 @@ AC_DEFUN([CARES_CONFIGURE_REENTRANT], [
   #
 ])
 
+
+dnl CARES_CONFIGURE_THREAD_SAFE
+dnl -------------------------------------------------
+dnl This first checks if the preprocessor _THREAD_SAFE
+dnl symbol is already defined. If it isn't currently
+dnl defined a set of checks are performed to verify
+dnl if its definition is required. Finally, if
+dnl _THREAD_SAFE is already defined or needed it takes
+dnl care of making adjustments necessary to ensure
+dnl that it is defined equally for further configure
+dnl tests and generated config file.
+
+AC_DEFUN([CARES_CONFIGURE_THREAD_SAFE], [
+  AC_PREREQ([2.50])dnl
+  #
+  AC_MSG_CHECKING([if _THREAD_SAFE is already defined])
+  AC_COMPILE_IFELSE([
+    AC_LANG_PROGRAM([[
+    ]],[[
+#ifdef _THREAD_SAFE
+      int dummy=1;
+#else
+      force compilation error
+#endif
+    ]])
+  ],[
+    AC_MSG_RESULT([yes])
+    tmp_thread_safe_initially_defined="yes"
+  ],[
+    AC_MSG_RESULT([no])
+    tmp_thread_safe_initially_defined="no"
+  ])
+  #
+  if test "$tmp_thread_safe_initially_defined" = "no"; then
+    AC_MSG_CHECKING([if _THREAD_SAFE is actually needed])
+    CARES_CHECK_NEED_THREAD_SAFE_SYSTEM
+    if test "$tmp_need_thread_safe" = "yes"; then
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+  fi
+  #
+  AC_MSG_CHECKING([if _THREAD_SAFE is onwards defined])
+  if test "$tmp_thread_safe_initially_defined" = "yes" ||
+    test "$tmp_need_thread_safe" = "yes"; then
+    CARES_CONFIGURE_FROM_NOW_ON_WITH_THREAD_SAFE
+    AC_MSG_RESULT([yes])
+  else
+    AC_MSG_RESULT([no])
+  fi
+  #
+])

ares/setup_once.h

@@ -415,7 +415,7 @@ typedef int sig_atomic_t;
  *  Actually use __32_getpwuid() on 64-bit VMS builds for getpwuid()
  */
 
-#if defined(VMS) && \
+#if defined(__VMS) && \
     defined(__INITIAL_POINTER_SIZE) && (__INITIAL_POINTER_SIZE == 64)
 #define getpwuid __32_getpwuid
 #endif
@@ -425,7 +425,7 @@ typedef int sig_atomic_t;
  * Macro argv_item_t hides platform details to code using it.
  */
 
-#ifdef VMS
+#ifdef __VMS
 #define argv_item_t  __char_ptr32
 #else
 #define argv_item_t  char *

ares/vc/acountry/.cvsignore

@@ -5,6 +5,8 @@ Release
 acountry.dep
 acountry.mak
 acountry.plg
+dll-*
+lib-*
 vc6acountry.dep
 vc6acountry.mak
 vc6acountry.plg

ares/vc/acountry/vc6acountry.dsp

@@ -34,97 +34,97 @@ RSC=rc.exe
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "DLL-Debug"
-# PROP BASE Intermediate_Dir "DLL-Debug"
+# PROP BASE Output_Dir "dll-debug"
+# PROP BASE Intermediate_Dir "dll-debug/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 1
-# PROP Output_Dir "DLL-Debug"
-# PROP Intermediate_Dir "DLL-Debug"
+# PROP Output_Dir "dll-debug"
+# PROP Intermediate_Dir "dll-debug/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /GZ /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /FD /GZ /c
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 caresd_imp.lib ws2_32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"DLL-Debug/acountry.exe" /pdbtype:sept /libpath:"..\cares\DLL-Debug"
-# ADD LINK32 caresd_imp.lib ws2_32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"DLL-Debug/acountry.exe" /pdbtype:sept /libpath:"..\cares\DLL-Debug"
+# ADD BASE LINK32 caresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"dll-debug/acountry.exe" /pdbtype:con /libpath:"..\cares\dll-debug" /fixed:no
+# ADD LINK32 caresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"dll-debug/acountry.exe" /pdbtype:con /libpath:"..\cares\dll-debug" /fixed:no
 
 !ELSEIF  "$(CFG)" == "acountry - Win32 using cares DLL Release"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "DLL-Release"
-# PROP BASE Intermediate_Dir "DLL-Release"
+# PROP BASE Output_Dir "dll-release"
+# PROP BASE Intermediate_Dir "dll-release/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 0
-# PROP Output_Dir "DLL-Release"
-# PROP Intermediate_Dir "DLL-Release"
+# PROP Output_Dir "dll-release"
+# PROP Intermediate_Dir "dll-release/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 cares_imp.lib ws2_32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"DLL-Release/acountry.exe" /libpath:"..\cares\DLL-Release"
-# ADD LINK32 cares_imp.lib ws2_32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"DLL-Release/acountry.exe" /libpath:"..\cares\DLL-Release"
+# ADD BASE LINK32 cares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"dll-release/acountry.exe" /libpath:"..\cares\dll-release" /fixed:no
+# ADD LINK32 cares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"dll-release/acountry.exe" /libpath:"..\cares\dll-release" /fixed:no
 
 !ELSEIF  "$(CFG)" == "acountry - Win32 using cares LIB Debug"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "LIB-Debug"
-# PROP BASE Intermediate_Dir "LIB-Debug"
+# PROP BASE Output_Dir "lib-debug"
+# PROP BASE Intermediate_Dir "lib-debug/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 1
-# PROP Output_Dir "LIB-Debug"
-# PROP Intermediate_Dir "LIB-Debug"
+# PROP Output_Dir "lib-debug"
+# PROP Intermediate_Dir "lib-debug/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 caresd.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"LIB-Debug/acountry.exe" /pdbtype:sept /libpath:"..\cares\LIB-Debug"
-# ADD LINK32 caresd.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"LIB-Debug/acountry.exe" /pdbtype:sept /libpath:"..\cares\LIB-Debug"
+# ADD BASE LINK32 libcaresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"lib-debug/acountry.exe" /pdbtype:con /libpath:"..\cares\lib-debug" /fixed:no
+# ADD LINK32 libcaresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"lib-debug/acountry.exe" /pdbtype:con /libpath:"..\cares\lib-debug" /fixed:no
 
 !ELSEIF  "$(CFG)" == "acountry - Win32 using cares LIB Release"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "LIB-Release"
-# PROP BASE Intermediate_Dir "LIB-Release"
+# PROP BASE Output_Dir "lib-release"
+# PROP BASE Intermediate_Dir "lib-release/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 0
-# PROP Output_Dir "LIB-Release"
-# PROP Intermediate_Dir "LIB-Release"
+# PROP Output_Dir "lib-release"
+# PROP Intermediate_Dir "lib-release/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 cares.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"LIB-Release/acountry.exe" /libpath:"..\cares\LIB-Release"
-# ADD LINK32 cares.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"LIB-Release/acountry.exe" /libpath:"..\cares\LIB-Release"
+# ADD BASE LINK32 libcares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"lib-release/acountry.exe" /libpath:"..\cares\lib-release" /fixed:no
+# ADD LINK32 libcares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"lib-release/acountry.exe" /libpath:"..\cares\lib-release" /fixed:no
 
 !ENDIF 
 

ares/vc/adig/.cvsignore

@@ -3,6 +3,8 @@ LIB-*
 adig.dep
 adig.mak
 adig.plg
+dll-*
+lib-*
 vc6adig.dep
 vc6adig.mak
 vc6adig.plg

ares/vc/adig/vc6adig.dsp

@@ -34,97 +34,97 @@ RSC=rc.exe
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "DLL-Debug"
-# PROP BASE Intermediate_Dir "DLL-Debug"
+# PROP BASE Output_Dir "dll-debug"
+# PROP BASE Intermediate_Dir "dll-debug/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 1
-# PROP Output_Dir "DLL-Debug"
-# PROP Intermediate_Dir "DLL-Debug"
+# PROP Output_Dir "dll-debug"
+# PROP Intermediate_Dir "dll-debug/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /GZ /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /FD /GZ /c
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 caresd_imp.lib ws2_32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"DLL-Debug/adig.exe" /pdbtype:sept /libpath:"..\cares\DLL-Debug"
-# ADD LINK32 caresd_imp.lib ws2_32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"DLL-Debug/adig.exe" /pdbtype:sept /libpath:"..\cares\DLL-Debug"
+# ADD BASE LINK32 caresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"dll-debug/adig.exe" /pdbtype:con /libpath:"..\cares\dll-debug" /fixed:no
+# ADD LINK32 caresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"dll-debug/adig.exe" /pdbtype:con /libpath:"..\cares\dll-debug" /fixed:no
 
 !ELSEIF  "$(CFG)" == "adig - Win32 using cares DLL Release"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "DLL-Release"
-# PROP BASE Intermediate_Dir "DLL-Release"
+# PROP BASE Output_Dir "dll-release"
+# PROP BASE Intermediate_Dir "dll-release/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 0
-# PROP Output_Dir "DLL-Release"
-# PROP Intermediate_Dir "DLL-Release"
+# PROP Output_Dir "dll-release"
+# PROP Intermediate_Dir "dll-release/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 cares_imp.lib ws2_32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"DLL-Release/adig.exe" /libpath:"..\cares\DLL-Release"
-# ADD LINK32 cares_imp.lib ws2_32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"DLL-Release/adig.exe" /libpath:"..\cares\DLL-Release"
+# ADD BASE LINK32 cares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"dll-release/adig.exe" /libpath:"..\cares\dll-release" /fixed:no
+# ADD LINK32 cares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"dll-release/adig.exe" /libpath:"..\cares\dll-release" /fixed:no
 
 !ELSEIF  "$(CFG)" == "adig - Win32 using cares LIB Debug"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "LIB-Debug"
-# PROP BASE Intermediate_Dir "LIB-Debug"
+# PROP BASE Output_Dir "lib-debug"
+# PROP BASE Intermediate_Dir "lib-debug/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 1
-# PROP Output_Dir "LIB-Debug"
-# PROP Intermediate_Dir "LIB-Debug"
+# PROP Output_Dir "lib-debug"
+# PROP Intermediate_Dir "lib-debug/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 caresd.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"LIB-Debug/adig.exe" /pdbtype:sept /libpath:"..\cares\LIB-Debug"
-# ADD LINK32 caresd.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"LIB-Debug/adig.exe" /pdbtype:sept /libpath:"..\cares\LIB-Debug"
+# ADD BASE LINK32 libcaresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"lib-debug/adig.exe" /pdbtype:con /libpath:"..\cares\lib-debug" /fixed:no
+# ADD LINK32 libcaresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"lib-debug/adig.exe" /pdbtype:con /libpath:"..\cares\lib-debug" /fixed:no
 
 !ELSEIF  "$(CFG)" == "adig - Win32 using cares LIB Release"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "LIB-Release"
-# PROP BASE Intermediate_Dir "LIB-Release"
+# PROP BASE Output_Dir "lib-release"
+# PROP BASE Intermediate_Dir "lib-release/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 0
-# PROP Output_Dir "LIB-Release"
-# PROP Intermediate_Dir "LIB-Release"
+# PROP Output_Dir "lib-release"
+# PROP Intermediate_Dir "lib-release/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 cares.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"LIB-Release/adig.exe" /libpath:"..\cares\LIB-Release"
-# ADD LINK32 cares.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"LIB-Release/adig.exe" /libpath:"..\cares\LIB-Release"
+# ADD BASE LINK32 libcares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"lib-release/adig.exe" /libpath:"..\cares\lib-release" /fixed:no
+# ADD LINK32 libcares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"lib-release/adig.exe" /libpath:"..\cares\lib-release" /fixed:no
 
 !ENDIF 
 

ares/vc/ahost/.cvsignore

@@ -3,6 +3,8 @@ LIB-*
 ahost.dep
 ahost.mak
 ahost.plg
+dll-*
+lib-*
 vc6ahost.dep
 vc6ahost.mak
 vc6ahost.plg

ares/vc/ahost/vc6ahost.dsp

@@ -34,97 +34,97 @@ RSC=rc.exe
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "DLL-Debug"
-# PROP BASE Intermediate_Dir "DLL-Debug"
+# PROP BASE Output_Dir "dll-debug"
+# PROP BASE Intermediate_Dir "dll-debug/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 1
-# PROP Output_Dir "DLL-Debug"
-# PROP Intermediate_Dir "DLL-Debug"
+# PROP Output_Dir "dll-debug"
+# PROP Intermediate_Dir "dll-debug/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /GZ /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /FD /GZ /c
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 caresd_imp.lib ws2_32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"DLL-Debug/ahost.exe" /pdbtype:sept /libpath:"..\cares\DLL-Debug"
-# ADD LINK32 caresd_imp.lib ws2_32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"DLL-Debug/ahost.exe" /pdbtype:sept /libpath:"..\cares\DLL-Debug"
+# ADD BASE LINK32 caresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"dll-debug/ahost.exe" /pdbtype:con /libpath:"..\cares\dll-debug" /fixed:no
+# ADD LINK32 caresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"dll-debug/ahost.exe" /pdbtype:con /libpath:"..\cares\dll-debug" /fixed:no
 
 !ELSEIF  "$(CFG)" == "ahost - Win32 using cares DLL Release"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "DLL-Release"
-# PROP BASE Intermediate_Dir "DLL-Release"
+# PROP BASE Output_Dir "dll-release"
+# PROP BASE Intermediate_Dir "dll-release/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 0
-# PROP Output_Dir "DLL-Release"
-# PROP Intermediate_Dir "DLL-Release"
+# PROP Output_Dir "dll-release"
+# PROP Intermediate_Dir "dll-release/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /FD /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 cares_imp.lib ws2_32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"DLL-Release/ahost.exe" /libpath:"..\cares\DLL-Release"
-# ADD LINK32 cares_imp.lib ws2_32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"DLL-Release/ahost.exe" /libpath:"..\cares\DLL-Release"
+# ADD BASE LINK32 cares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"dll-release/ahost.exe" /libpath:"..\cares\dll-release" /fixed:no
+# ADD LINK32 cares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"dll-release/ahost.exe" /libpath:"..\cares\dll-release" /fixed:no
 
 !ELSEIF  "$(CFG)" == "ahost - Win32 using cares LIB Debug"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "LIB-Debug"
-# PROP BASE Intermediate_Dir "LIB-Debug"
+# PROP BASE Output_Dir "lib-debug"
+# PROP BASE Intermediate_Dir "lib-debug/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 1
-# PROP Output_Dir "LIB-Debug"
-# PROP Intermediate_Dir "LIB-Debug"
+# PROP Output_Dir "lib-debug"
+# PROP Intermediate_Dir "lib-debug/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /GZ /c
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 caresd.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"LIB-Debug/ahost.exe" /pdbtype:sept /libpath:"..\cares\LIB-Debug"
-# ADD LINK32 caresd.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"LIB-Debug/ahost.exe" /pdbtype:sept /libpath:"..\cares\LIB-Debug"
+# ADD BASE LINK32 libcaresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"lib-debug/ahost.exe" /pdbtype:con /libpath:"..\cares\lib-debug" /fixed:no
+# ADD LINK32 libcaresd.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"lib-debug/ahost.exe" /pdbtype:con /libpath:"..\cares\lib-debug" /fixed:no
 
 !ELSEIF  "$(CFG)" == "ahost - Win32 using cares LIB Release"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "LIB-Release"
-# PROP BASE Intermediate_Dir "LIB-Release"
+# PROP BASE Output_Dir "lib-release"
+# PROP BASE Intermediate_Dir "lib-release/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 0
-# PROP Output_Dir "LIB-Release"
-# PROP Intermediate_Dir "LIB-Release"
+# PROP Output_Dir "lib-release"
+# PROP Intermediate_Dir "lib-release/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "CARES_STATICLIB" /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 cares.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"LIB-Release/ahost.exe" /libpath:"..\cares\LIB-Release"
-# ADD LINK32 cares.lib ws2_32.lib advapi32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"LIB-Release/ahost.exe" /libpath:"..\cares\LIB-Release"
+# ADD BASE LINK32 libcares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"lib-release/ahost.exe" /libpath:"..\cares\lib-release" /fixed:no
+# ADD LINK32 libcares.lib ws2_32.lib advapi32.lib kernel32.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"lib-release/ahost.exe" /libpath:"..\cares\lib-release" /fixed:no
 
 !ENDIF 
 

ares/vc/cares/.cvsignore

@@ -1,5 +1,7 @@
 DLL-*
 LIB-*
+dll-*
+lib-*
 vc6cares.dep
 vc6cares.mak
 vc6cares.ncb

ares/vc/cares/vc6cares.dsp

@@ -33,109 +33,109 @@ CFG=cares - Win32 LIB Debug
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "DLL-Debug"
-# PROP BASE Intermediate_Dir "DLL-Debug"
+# PROP BASE Output_Dir "dll-debug"
+# PROP BASE Intermediate_Dir "dll-debug/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 1
-# PROP Output_Dir "DLL-Debug"
-# PROP Intermediate_Dir "DLL-Debug"
+# PROP Output_Dir "dll-debug"
+# PROP Intermediate_Dir "dll-debug/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
 CPP=cl.exe
-# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "..\.." /D "WIN32" /D "DEBUGBUILD" /D "CARES_BUILDING_LIBRARY" /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "DEBUGBUILD" /D "CARES_BUILDING_LIBRARY" /FD /GZ /c
+# ADD BASE CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "DEBUGBUILD" /D "CARES_BUILDING_LIBRARY" /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "DEBUGBUILD" /D "CARES_BUILDING_LIBRARY" /FD /GZ /c
 MTL=midl.exe
-# ADD BASE MTL /nologo /D "DEBUGBUILD" /mktyplib203 /win32
-# ADD MTL /nologo /D "DEBUGBUILD" /mktyplib203 /win32
+# ADD BASE MTL /nologo /D "_DEBUG" /win32
+# ADD MTL /nologo /D "_DEBUG" /win32
 RSC=rc.exe
-# ADD BASE RSC /l 0x409 /d "DEBUGBUILD"
-# ADD RSC /l 0x409 /d "DEBUGBUILD"
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 ws2_32.lib advapi32.lib /nologo /dll /incremental:no /map /debug /machine:I386 /out:"DLL-Debug/caresd.dll" /implib:"DLL-Debug/caresd_imp.lib" /pdbtype:sept
-# ADD LINK32 ws2_32.lib advapi32.lib /nologo /dll /incremental:no /map /debug /machine:I386 /out:"DLL-Debug/caresd.dll" /implib:"DLL-Debug/caresd_imp.lib" /pdbtype:sept
+# ADD BASE LINK32 ws2_32.lib advapi32.lib kernel32.lib /nologo /dll /incremental:no /debug /machine:I386 /out:"dll-debug/caresd.dll" /implib:"dll-debug/caresd.lib" /pdbtype:con /fixed:no
+# ADD LINK32 ws2_32.lib advapi32.lib kernel32.lib /nologo /dll /incremental:no /debug /machine:I386 /out:"dll-debug/caresd.dll" /implib:"dll-debug/caresd.lib" /pdbtype:con /fixed:no
 
 !ELSEIF  "$(CFG)" == "cares - Win32 DLL Release"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "DLL-Release"
-# PROP BASE Intermediate_Dir "DLL-Release"
+# PROP BASE Output_Dir "dll-release"
+# PROP BASE Intermediate_Dir "dll-release/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 0
-# PROP Output_Dir "DLL-Release"
-# PROP Intermediate_Dir "DLL-Release"
+# PROP Output_Dir "dll-release"
+# PROP Intermediate_Dir "dll-release/obj"
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
 CPP=cl.exe
-# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "CARES_BUILDING_LIBRARY" /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "CARES_BUILDING_LIBRARY" /FD /c
+# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "CARES_BUILDING_LIBRARY" /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "CARES_BUILDING_LIBRARY" /FD /c
 MTL=midl.exe
-# ADD BASE MTL /nologo /mktyplib203 /win32
-# ADD MTL /nologo /mktyplib203 /win32
+# ADD BASE MTL /nologo /D "NDEBUG" /win32
+# ADD MTL /nologo /D "NDEBUG" /win32
 RSC=rc.exe
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LINK32=link.exe
-# ADD BASE LINK32 ws2_32.lib advapi32.lib /nologo /dll /pdb:none /machine:I386 /out:"DLL-Release/cares.dll" /implib:"DLL-Release/cares_imp.lib"
-# ADD LINK32 ws2_32.lib advapi32.lib /nologo /dll /pdb:none /machine:I386 /out:"DLL-Release/cares.dll" /implib:"DLL-Release/cares_imp.lib"
+# ADD BASE LINK32 ws2_32.lib advapi32.lib kernel32.lib /nologo /dll /pdb:none /machine:I386 /out:"dll-release/cares.dll" /implib:"dll-release/cares.lib" /fixed:no /release /incremental:no
+# ADD LINK32 ws2_32.lib advapi32.lib kernel32.lib /nologo /dll /pdb:none /machine:I386 /out:"dll-release/cares.dll" /implib:"dll-release/cares.lib" /fixed:no /release /incremental:no
 
 !ELSEIF  "$(CFG)" == "cares - Win32 LIB Debug"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "LIB-Debug"
-# PROP BASE Intermediate_Dir "LIB-Debug"
+# PROP BASE Output_Dir "lib-debug"
+# PROP BASE Intermediate_Dir "lib-debug/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 1
-# PROP Output_Dir "LIB-Debug"
-# PROP Intermediate_Dir "LIB-Debug"
+# PROP Output_Dir "lib-debug"
+# PROP Intermediate_Dir "lib-debug/obj"
 # PROP Target_Dir ""
 CPP=cl.exe
-# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "..\.." /D "WIN32" /D "DEBUGBUILD" /D "CARES_BUILDING_LIBRARY" /D "CARES_STATICLIB" /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\.." /D "WIN32" /D "DEBUGBUILD" /D "CARES_BUILDING_LIBRARY" /D "CARES_STATICLIB" /FD /GZ /c
+# ADD BASE CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "DEBUGBUILD" /D "CARES_BUILDING_LIBRARY" /D "CARES_STATICLIB" /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /GX /Zi /Od /I "..\.." /D "_DEBUG" /D "WIN32" /D "DEBUGBUILD" /D "CARES_BUILDING_LIBRARY" /D "CARES_STATICLIB" /FD /GZ /c
 RSC=rc.exe
-# ADD BASE RSC /l 0x409 /d "DEBUGBUILD"
-# ADD RSC /l 0x409 /d "DEBUGBUILD"
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo /out:"LIB-Debug/caresd.lib" /machine:I386
-# ADD LIB32 /nologo /out:"LIB-Debug/caresd.lib" /machine:I386
+# ADD BASE LIB32 /nologo /out:"lib-debug/libcaresd.lib" /machine:I386
+# ADD LIB32 /nologo /out:"lib-debug/libcaresd.lib" /machine:I386
 
 !ELSEIF  "$(CFG)" == "cares - Win32 LIB Release"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "LIB-Release"
-# PROP BASE Intermediate_Dir "LIB-Release"
+# PROP BASE Output_Dir "lib-release"
+# PROP BASE Intermediate_Dir "lib-release/obj"
 # PROP BASE Target_Dir ""
 # PROP Use_MFC 0
 # PROP Use_Debug_Libraries 0
-# PROP Output_Dir "LIB-Release"
-# PROP Intermediate_Dir "LIB-Release"
+# PROP Output_Dir "lib-release"
+# PROP Intermediate_Dir "lib-release/obj"
 # PROP Target_Dir ""
 CPP=cl.exe
-# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "CARES_BUILDING_LIBRARY" /D "CARES_STATICLIB" /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "CARES_BUILDING_LIBRARY" /D "CARES_STATICLIB" /FD /c
+# ADD BASE CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "CARES_BUILDING_LIBRARY" /D "CARES_STATICLIB" /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "..\.." /D "NDEBUG" /D "WIN32" /D "CARES_BUILDING_LIBRARY" /D "CARES_STATICLIB" /FD /c
 RSC=rc.exe
-# ADD BASE RSC /l 0x409
-# ADD RSC /l 0x409
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
 BSC32=bscmake.exe
 # ADD BASE BSC32 /nologo
 # ADD BSC32 /nologo
 LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo /out:"LIB-Release/cares.lib" /machine:I386
-# ADD LIB32 /nologo /out:"LIB-Release/cares.lib" /machine:I386
+# ADD BASE LIB32 /nologo /out:"lib-release/libcares.lib" /machine:I386
+# ADD LIB32 /nologo /out:"lib-release/libcares.lib" /machine:I386
 
 !ENDIF 
 
@@ -170,6 +170,10 @@ SOURCE=..\..\ares_cancel.c
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\ares_data.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\ares_destroy.c
 # End Source File
 # Begin Source File
@@ -310,6 +314,10 @@ SOURCE=..\..\ares_build.h
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\ares_data.h
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\ares_dns.h
 # End Source File
 # Begin Source File
@@ -361,13 +369,13 @@ SOURCE=..\..\inet_ntop.h
 SOURCE=..\..\nameser.h
 # End Source File
 # End Group
-# Begin Group "Resource Files"
-
-
-
-# PROP Default_Filter ""
-
-# Begin Source File
-
-
-
+# Begin Group "Resource Files"
+
+# PROP Default_Filter ""
+# Begin Source File
+
+SOURCE=..\..\cares.rc
+# End Source File
+# End Group
+# End Target
+# End Project

buildconf

@@ -267,6 +267,8 @@ for fname in .deps \
     aclocal.m4 \
     aclocal.m4.bak \
     ares_build.h \
+    ares_config.h \
+    ares_config.h.in \
     autom4te.cache \
     compile \
     config.guess \

configure.ac

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -42,9 +42,16 @@ CURL_CHECK_OPTION_DEBUG
 CURL_CHECK_OPTION_OPTIMIZE
 CURL_CHECK_OPTION_WARNINGS
 CURL_CHECK_OPTION_CURLDEBUG
+CURL_CHECK_OPTION_ARES
 
 CURL_CHECK_PATH_SEPARATOR_REQUIRED
 
+#
+# save the configure arguments
+#
+CONFIGURE_OPTIONS="\"$ac_configure_args\""
+AC_SUBST(CONFIGURE_OPTIONS)
+
 dnl SED is mandatory for configure process and libtool.
 dnl Set it now, allowing it to be changed later.
 AC_PATH_PROG([SED], [sed], [not_found],
@@ -89,6 +96,11 @@ AC_SUBST([AR])
 
 AC_SUBST(libext)
 
+dnl Remove non-configure distributed curlbuild.h
+if test -f ${srcdir}/include/curl/curlbuild.h; then
+  rm -f ${srcdir}/include/curl/curlbuild.h
+fi
+
 dnl figure out the libcurl version
 VERSION=`$SED -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curlver.h`
 AM_INIT_AUTOMAKE(curl,$VERSION)
@@ -124,6 +136,7 @@ curl_verbose_msg="enabled (--disable-verbose)"
    curl_sspi_msg="no      (--enable-sspi)"
    curl_ldap_msg="no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)"
   curl_ldaps_msg="no      (--enable-ldaps)"
+   curl_rtsp_msg="no      (--enable-rtsp)"
 
 dnl
 dnl Save anything in $LIBS for later
@@ -148,6 +161,7 @@ dnl This defines _ALL_SOURCE for AIX
 CURL_CHECK_AIX_ALL_SOURCE
 
 dnl Our configure and build reentrant settings
+CURL_CONFIGURE_THREAD_SAFE
 CURL_CONFIGURE_REENTRANT
 
 dnl check for how to do large files
@@ -168,6 +182,17 @@ case $host in
     ;;
 esac
 
+AC_MSG_CHECKING([if compiler is icc (to build with PIC)])
+case $CC in
+  icc | */icc)
+    AC_MSG_RESULT([yes])
+    with_pic=yes
+    ;;
+  *)
+    AC_MSG_RESULT([no])
+    ;;
+esac
+
 dnl libtool setup
 AC_PROG_LIBTOOL
 
@@ -232,27 +257,17 @@ CURL_SET_COMPILER_DEBUG_OPTS
 CURL_SET_COMPILER_OPTIMIZE_OPTS
 CURL_SET_COMPILER_WARNING_OPTS
 
-case $host in
+if test "$compiler_id" = "INTEL_UNIX_C"; then
   #
-  x86_64*linux*|amd64*freebsd*|ia64*freebsd*)
-    #
-    if test "$compiler_id" = "INTEL_UNIX_C"; then
-      #
-      if test "$compiler_num" -ge "900" &&
-        test "$compiler_num" -lt "1000"; then
-        dnl icc 9.X specific
-        CFLAGS="$CFLAGS -i-dynamic"
-      fi
-      #
-      if test "$compiler_num" -ge "1000"; then
-        dnl icc 10.X or later
-        CFLAGS="$CFLAGS -shared-intel"
-      fi
-      #
-    fi
-    ;;
+  if test "$compiler_num" -ge "1000"; then
+    dnl icc 10.X or later
+    CFLAGS="$CFLAGS -shared-intel"
+  elif test "$compiler_num" -ge "900"; then
+    dnl icc 9.X specific
+    CFLAGS="$CFLAGS -i-dynamic"
+  fi
   #
-esac
+fi
 
 CURL_CHECK_COMPILER_HALT_ON_ERROR
 CURL_CHECK_COMPILER_ARRAY_SIZE_NEGATIVE
@@ -305,8 +320,10 @@ AC_HELP_STRING([--disable-http],[Disable HTTP support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_HTTP, 1, [to disable HTTP])
-       AC_MSG_WARN([disable HTTP disables FTP over proxy])
+       AC_MSG_WARN([disable HTTP disables FTP over proxy and RTSP])
        AC_SUBST(CURL_DISABLE_HTTP, [1])
+       AC_DEFINE(CURL_DISABLE_RTSP, 1, [to disable RTSP])
+       AC_SUBST(CURL_DISABLE_RTSP, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -403,6 +420,32 @@ AC_HELP_STRING([--disable-ldaps],[Disable LDAPS support]),
        AC_SUBST(CURL_DISABLE_LDAPS, [1])
 )
 
+AC_MSG_CHECKING([whether to support rtsp])
+AC_ARG_ENABLE(rtsp,
+AC_HELP_STRING([--enable-rtsp],[Enable RTSP support])
+AC_HELP_STRING([--disable-rtsp],[Disable RTSP support]),
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_RTSP, 1, [to disable RTSP])
+       AC_SUBST(CURL_DISABLE_RTSP, [1])
+       ;;
+  *)   if test x$CURL_DISABLE_HTTP = x1 ; then
+          AC_MSG_ERROR(HTTP support needs to be enabled in order to enable RTSP support!)
+       else
+          AC_MSG_RESULT(yes)
+          curl_rtsp_msg="enabled"
+       fi
+       ;;
+  esac ],
+       if test "x$CURL_DISABLE_HTTP" != "x1"; then
+          AC_MSG_RESULT(yes)
+          curl_rtsp_msg="enabled"
+       else
+          AC_MSG_RESULT(no)
+       fi
+)
+
 AC_MSG_CHECKING([whether to support proxies])
 AC_ARG_ENABLE(proxy,
 AC_HELP_STRING([--enable-proxy],[Enable proxy support])
@@ -465,6 +508,57 @@ AC_HELP_STRING([--disable-tftp],[Disable TFTP support]),
        AC_MSG_RESULT(yes)
 )
 
+AC_MSG_CHECKING([whether to support pop3])
+AC_ARG_ENABLE(pop3,
+AC_HELP_STRING([--enable-pop3],[Enable POP3 support])
+AC_HELP_STRING([--disable-pop3],[Disable POP3 support]),
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_POP3, 1, [to disable POP3])
+       AC_SUBST(CURL_DISABLE_POP3, [1])
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+
+
+AC_MSG_CHECKING([whether to support imap])
+AC_ARG_ENABLE(imap,
+AC_HELP_STRING([--enable-imap],[Enable IMAP support])
+AC_HELP_STRING([--disable-imap],[Disable IMAP support]),
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_IMAP, 1, [to disable IMAP])
+       AC_SUBST(CURL_DISABLE_IMAP, [1])
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+
+
+AC_MSG_CHECKING([whether to support smtp])
+AC_ARG_ENABLE(smtp,
+AC_HELP_STRING([--enable-smtp],[Enable SMTP support])
+AC_HELP_STRING([--disable-smtp],[Disable SMTP support]),
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_SMTP, 1, [to disable SMTP])
+       AC_SUBST(CURL_DISABLE_SMTP, [1])
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+
+
 dnl **********************************************************************
 dnl Check for built-in manual
 dnl **********************************************************************
@@ -1164,33 +1258,61 @@ if test X"$OPT_SSL" != Xno; then
     dnl check the given --with-ssl spot
     PKGTEST="no"
     PREFIX_OPENSSL=$OPT_SSL
+
+    dnl Try pkg-config even when cross-compiling.  Since we
+    dnl specify PKG_CONFIG_LIBDIR we're only looking where
+    dnl the user told us to look
+    OPENSSL_PCDIR="$OPT_SSL/lib/pkgconfig"
+    AC_MSG_NOTICE([PKG_CONFIG_LIBDIR will be set to "$OPENSSL_PCDIR"])
+    if test -e "$OPENSSL_PCDIR/openssl.pc"; then
+      PKGTEST="yes"
+    fi
+
+    dnl in case pkg-config comes up empty, use what we got
+    dnl via --with-ssl
     LIB_OPENSSL="$PREFIX_OPENSSL/lib$libsuff"
     if test "$PREFIX_OPENSSL" != "/usr" ; then
-      LDFLAGS="$LDFLAGS -L$LIB_OPENSSL"
-      CPPFLAGS="$CPPFLAGS -I$PREFIX_OPENSSL/include"
+      SSL_LDFLAGS="-L$LIB_OPENSSL"
+      SSL_CPPFLAGS="-I$PREFIX_OPENSSL/include"
     fi
-    CPPFLAGS="$CPPFLAGS -I$PREFIX_OPENSSL/include/openssl"
+    SSL_CPPFLAGS="$SSL_CPPFLAGS -I$PREFIX_OPENSSL/include/openssl"
     ;;
   esac
 
   if test "$PKGTEST" = "yes"; then
 
-    CURL_CHECK_PKGCONFIG(openssl)
+    CURL_CHECK_PKGCONFIG(openssl, [$OPENSSL_PCDIR])
 
     if test "$PKGCONFIG" != "no" ; then
-      SSL_LIBS=`$PKGCONFIG --libs-only-l openssl 2>/dev/null`
-      SSL_LDFLAGS=`$PKGCONFIG --libs-only-L openssl 2>/dev/null`
-      SSL_CPPFLAGS=`$PKGCONFIG --cflags-only-I openssl 2>/dev/null`
+      SSL_LIBS=`CURL_EXPORT_PCDIR([$OPENSSL_PCDIR]) dnl
+        $PKGCONFIG --libs-only-l openssl 2>/dev/null`
+
+      SSL_LDFLAGS=`CURL_EXPORT_PCDIR([$OPENSSL_PCDIR]) dnl
+        $PKGCONFIG --libs-only-L openssl 2>/dev/null`
+
+      SSL_CPPFLAGS=`CURL_EXPORT_PCDIR([$OPENSSL_PCDIR]) dnl
+        $PKGCONFIG --cflags-only-I openssl 2>/dev/null`
+
+      AC_MSG_NOTICE([pkg-config: SSL_LIBS: "$SSL_LIBS"])
+      AC_MSG_NOTICE([pkg-config: SSL_LDFLAGS: "$SSL_LDFLAGS"])
+      AC_MSG_NOTICE([pkg-config: SSL_CPPFLAGS: "$SSL_CPPFLAGS"])
 
       LIB_OPENSSL=`echo $SSL_LDFLAGS | sed -e 's/-L//g'`
 
-      dnl use the values pkg-config reported
+      dnl use the values pkg-config reported.  This is here
+      dnl instead of below with CPPFLAGS and LDFLAGS because we only
+      dnl learn about this via pkg-config.  If we only have
+      dnl the argument to --with-ssl we don't know what
+      dnl additional libs may be necessary.  Hope that we
+      dnl don't need any.
       LIBS="$LIBS $SSL_LIBS"
-      CPPFLAGS="$CPPFLAGS $SSL_CPPFLAGS"
-      LDFLAGS="$LDFLAGS $SSL_LDFLAGS"
     fi
   fi
 
+  dnl finally, set flags to use SSL
+  CPPFLAGS="$CPPFLAGS $SSL_CPPFLAGS"
+  LDFLAGS="$LDFLAGS $SSL_LDFLAGS"
+
   dnl This is for Msys/Mingw
   case $host in
     *-*-msys* | *-*-mingw*)
@@ -1304,6 +1426,7 @@ if test X"$OPT_SSL" != Xno; then
     AC_CHECK_FUNCS( RAND_status \
                     RAND_screen \
                     RAND_egd \
+                    ENGINE_cleanup \
                     CRYPTO_cleanup_all_ex_data \
                     SSL_get_shutdown )
 
@@ -1612,6 +1735,12 @@ if test "$OPENSSL_ENABLED" != "1" -a "$GNUTLS_ENABLED" != "1"; then
           version="unknown"
         fi
       fi
+    else
+        # Without pkg-config, we'll kludge in some defaults
+        addlib="-L$OPT_NSS/lib -lssl3 -lsmime3 -lnss3 -lplds4 -lplc4 -lnspr4 -lpthread -ldl"
+        addcflags="-I$OPT_NSS/include"
+        version="unknown"
+        nssprefix=$OPT_NSS
     fi
 
     dnl Check for functionPK11_CreateGenericObject
@@ -1707,7 +1836,7 @@ if test X"$OPT_LIBSSH2" != Xno; then
       version=`$PKGCONFIG --modversion libssh2`
       DIR_SSH2=`echo $LD_SSH2 | $SED -e 's/-L//'`
     fi
-    
+
     ;;
   off)
     dnl no --with-libssh2 option given, just check default places
@@ -1814,85 +1943,11 @@ case "$LIBIDN" in
        ;;
 esac
 
-dnl Default is to try the thread-safe versions of a few functions
-OPT_THREAD=on
-
-dnl detect AIX 4.3 or later
-dnl see full docs on this reasoning in the lib/hostip.c source file
-AC_MSG_CHECKING([AIX 4.3 or later])
-AC_PREPROC_IFELSE([
-#if defined(_AIX) && defined(_AIX43)
-printf("just fine");
-#else
-#error "this is not AIX 4.3 or later"
-#endif
-],
- [ AC_MSG_RESULT([yes])
-   RECENTAIX=yes
-   OPT_THREAD=off ],
- [ AC_MSG_RESULT([no]) ]
-)
-
-AC_ARG_ENABLE(thread,dnl
-AC_HELP_STRING([--disable-thread],[don't look for thread-safe functions])
-AC_HELP_STRING([--enable-thread],[look for thread-safe functions]),
-[ case "$enableval" in
-  no)
-    OPT_THREAD=off
-    AC_MSG_WARN(libcurl will not get built using thread-safe functions)
-    ;;
-  *)
-    ;;
-  esac
-]
-)
-
-if test X"$OPT_THREAD" = Xoff
-then
-  AC_DEFINE(DISABLED_THREADSAFE, 1,
-    [Set to explicitly specify we don't want to use thread-safe functions])
-else
-  dnl if test "$ipv6" != "yes"; then
-    dnl dig around for gethostbyname_r()
-    dnl the old gethostbyname_r check was done here
-
-    dnl dig around for gethostbyaddr_r()
-    dnl the old gethostbyaddr_r check was here BUT COMMENTED OUT
-  dnl fi
-
-  dnl poke around for inet_ntoa_r()
-  dnl the old inet_ntoa_r check was done here
-
-  dnl is there a localtime_r()
-  dnl the old localtime_r check was done here
-
-  dnl is there a strerror_r()
-  dnl the old strerror_r check was done here
-
-  checkfor_gmtime_r="yes"
-fi
-
-dnl for recent AIX versions, we skip all the thread-safe checks above since
-dnl they claim a thread-safe libc using the standard API. But there are
-dnl some functions still not thread-safe. Check for these!
 
 dnl Let's hope this split URL remains working:
 dnl http://publibn.boulder.ibm.com/doc_link/en_US/a_doc_lib/aixprggd/ \
 dnl genprogc/thread_quick_ref.htm
 
-if test "x$RECENTAIX" = "xyes"; then
-
-  AC_DEFINE(_THREAD_SAFE, 1, [define this if you need it to compile thread-safe code])
-
-  dnl is there a localtime_r()
-  dnl the old localtime_r check was done here
-
-  dnl is there a strerror_r()
-  dnl the old strerror_r check was done here
-
-  checkfor_gmtime_r="yes"
-fi
-
 
 dnl **********************************************************************
 dnl Back to "normal" configuring
@@ -1983,8 +2038,9 @@ CURL_CHECK_STRUCT_TIMEVAL
 CURL_VERIFY_RUNTIMELIBS
 
 AC_CHECK_SIZEOF(size_t)
-AC_CHECK_SIZEOF(int)
 AC_CHECK_SIZEOF(long)
+AC_CHECK_SIZEOF(int)
+AC_CHECK_SIZEOF(short)
 CURL_CONFIGURE_LONG
 AC_CHECK_SIZEOF(time_t)
 AC_CHECK_SIZEOF(off_t)
@@ -2220,81 +2276,8 @@ fi
 dnl set variable for use in automakefile(s)
 AM_CONDITIONAL(USE_MANUAL, test x"$USE_MANUAL" = x1)
 
-aresembedded="unknown"
-configure_rundir=`pwd`
-embedded_ares_builddir="$configure_rundir/ares"
-AC_MSG_CHECKING([whether to enable c-ares])
-AC_ARG_ENABLE(ares,
-AC_HELP_STRING([--enable-ares=PATH],[Enable c-ares for name lookups])
-AC_HELP_STRING([--disable-ares],[Disable c-ares for name lookups]),
-[ case "$enableval" in
-  no)
-       AC_MSG_RESULT(no)
-       ;;
-  *)   AC_MSG_RESULT(yes)
-
-       if test "x$IPV6_ENABLED" = "x1"; then
-         AC_MSG_NOTICE([c-ares may not work properly with ipv6])
-       fi
-
-       AC_DEFINE(USE_ARES, 1, [Define if you want to enable c-ares support])
-       dnl substitute HAVE_ARES for curl-config and similar
-       HAVE_ARES="1"
-       AC_SUBST(HAVE_ARES)
-       curl_ares_msg="enabled"
-
-       LIBS="-lcares $LIBS"
-
-       dnl For backwards compatibility default to includes/lib in srcdir/ares
-       dnl If a value is specified it is assumed that the libs are in $val/lib
-       dnl and the includes are in $val/include. This is the default setup for
-       dnl ares so it should not be a problem.
-       if test "x$enableval" = "xyes" ; then
-         if test -d "$srcdir/ares"; then
-            aresembedded="yes"
-            AC_CONFIG_SUBDIRS(ares)
-            dnl Since c-ares has installable configured header files, path
-            dnl inclusion is fully done in makefiles for in-tree builds.
-            LDFLAGS="$LDFLAGS -L$embedded_ares_builddir"
-         fi
-       else
-         CPPFLAGS="$CPPFLAGS -I$enableval/include"
-         LDFLAGS="$LDFLAGS -L$enableval/lib"
-       fi
-
-       if test -z "$aresembedded"; then
-         dnl verify that a sufficient c-ares is here if we have pointed one
-         dnl out and don't use the "embedded" ares dir (in which case we don't
-         dnl check it because it might not have been built yet)
-         AC_MSG_CHECKING([that c-ares is good and recent enough])
-         AC_LINK_IFELSE([
-           AC_LANG_PROGRAM([[
-#include <ares.h>
-             /* set of dummy functions in case c-ares was built with debug */
-             void curl_dofree() { }
-             void curl_sclose() { }
-             void curl_domalloc() { }
-             void curl_docalloc() { }
-             void curl_socket() { }
-           ]],[[
-             ares_channel channel;
-             ares_cancel(channel); /* added in 1.2.0 */
-             ares_process_fd(channel, 0, 0); /* added in 1.4.0 */
-           ]])
-         ],[
-           AC_MSG_RESULT([yes])
-         ],[
-           AC_MSG_RESULT([no])
-           AC_MSG_ERROR([c-ares library defective or too old])
-         ])
-       fi
-       ;;
-  esac ],
-       AC_MSG_RESULT(no)
-)
-
-dnl set variable for use in automakefile(s)
-AM_CONDITIONAL(USE_EMBEDDED_ARES, test x$aresembedded = xyes)
+CURL_CHECK_LIB_ARES
+AM_CONDITIONAL(USE_EMBEDDED_ARES, test x$embedded_ares = xyes)
 
 dnl ************************************************************
 dnl disable verbose text strings
@@ -2328,7 +2311,7 @@ AC_HELP_STRING([--disable-sspi],[Disable SSPI]),
          AC_MSG_RESULT(yes)
          AC_DEFINE(USE_WINDOWS_SSPI, 1, [to enable SSPI support])
          AC_SUBST(USE_WINDOWS_SSPI, [1])
-         curl_sspi_msg="yes"
+         curl_sspi_msg="enabled"
        else
          AC_MSG_RESULT(no)
          AC_MSG_WARN([--enable-sspi Ignored. Only supported on native Windows builds.])
@@ -2486,7 +2469,7 @@ fi
 if test "x$HAVE_LIBZ" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES libz"
 fi
-if test "x$HAVE_ARES" = "x1"; then
+if test "x$USE_ARES" = "x1"; then
   SUPPORT_FEATURES="$SUPPORT_FEATURES AsynchDNS"
 fi
 if test "x$IDN_ENABLED" = "x1"; then
@@ -2532,10 +2515,36 @@ fi
 if test "x$CURL_DISABLE_TFTP" != "x1"; then
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS TFTP"
 fi
+if test "x$CURL_DISABLE_POP3" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS POP3"
+  if test "x$SSL_ENABLED" = "x1"; then
+    SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS POP3S"
+  fi
+fi
+if test "x$CURL_DISABLE_IMAP" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS IMAP"
+  if test "x$SSL_ENABLED" = "x1"; then
+    SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS IMAPS"
+  fi
+fi
+if test "x$CURL_DISABLE_SMTP" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS SMTP"
+  if test "x$SSL_ENABLED" = "x1"; then
+    SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS SMTPS"
+  fi
+fi
 if test "x$USE_LIBSSH2" = "x1"; then
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS SCP"
   SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS SFTP"
 fi
+if test "x$CURL_DISABLE_RTSP" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS RTSP"
+fi
+
+dnl replace spaces with newlines
+dnl sort the lines
+dnl replace the newlines back to spaces
+SUPPORT_PROTOCOLS=`echo $SUPPORT_PROTOCOLS | tr ' ' '\012' | sort | tr '\012' ' '`
 
 AC_SUBST(SUPPORT_PROTOCOLS)
 
@@ -2551,8 +2560,11 @@ squeeze CURL_LIBS
 squeeze LIBCURL_LIBS
 squeeze TEST_SERVER_LIBS
 
+squeeze SUPPORT_FEATURES
+squeeze SUPPORT_PROTOCOLS
+
 if test "x$want_curldebug_assumed" = "xyes" &&
-  test "x$want_curldebug" = "xyes" && test "x$HAVE_ARES" = "x1"; then
+  test "x$want_curldebug" = "xyes" && test "x$USE_ARES" = "x1"; then
   ac_configure_args="$ac_configure_args --enable-curldebug"
 fi
 
@@ -2610,6 +2622,8 @@ AC_MSG_NOTICE([Configured to build curl/libcurl:
   ca cert path:    ${capath}
   LDAP support:    ${curl_ldap_msg}
   LDAPS support:   ${curl_ldaps_msg}
+  RTSP support:    ${curl_rtsp_msg}
+  Protocols:       ${SUPPORT_PROTOCOLS}
 ])
 
 if test "x$soname_bump" = "xyes"; then

curl-config.in

@@ -37,6 +37,7 @@ Available values for OPTION include:
   --cc        compiler
   --cflags    pre-processor and compiler flags
   --checkfor [version] check for (lib)curl of the specified version
+  --configure the arguments given to configure when building curl
   --features  newline separated list of enabled features
   --help      display this help and exit
   --libs      library linking information
@@ -146,6 +147,10 @@ while test $# -gt 0; do
 	echo @libdir@/libcurl.@libext@ @LDFLAGS@ @LIBCURL_LIBS@ @LIBS@
 	;;
 
+    --configure)
+      echo @CONFIGURE_OPTIONS@
+    ;;
+
     *)
         echo "unknown option: $1"
 	usage 1

docs/BINDINGS

@@ -63,6 +63,10 @@ Euphoria
   Written by Ray Smith
   http://rays-web.com/eulibcurl.htm
 
+Falcon
+
+  http://www.falconpl.org/index.ftd?page_id=prjs&prj_id=curl
+
 Ferite
 
   Written by Paul Querna

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: Nov 3, 2009 (http://curl.haxx.se/docs/faq.html)
+Updated: Nov 7, 2009 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _
                               ___| | | |  _ \| |
                              / __| | | | |_) | |
@@ -73,6 +73,7 @@ FAQ
   4.15 FTPS doesn't work
   4.16 My HTTP POST or PUT requests are slow!
   4.17 Non-functional connect timeouts on Windows
+  4.18 file:// URLs containing drive letters (Windows, NetWare)
 
  5. libcurl Issues
   5.1 Is libcurl thread-safe?
@@ -915,6 +916,33 @@ FAQ
   anything else. This will make (lib)curl to consider the connection connected
   and thus the connect timeout won't trigger.
 
+  4.18 file:// URLs containing drive letters (Windows, NetWare)
+
+  When using cURL to try to download a local file, one might use a URL
+  in this format:
+
+  file://D:/blah.txt
+
+  You'll find that even if D:\blah.txt does exist, cURL returns a 'file
+  not found' error.
+
+  According to RFC 1738 (http://www.faqs.org/rfcs/rfc1738.html),
+  file:// URLs must contain a host component, but it is ignored by
+  most implementations. In the above example, 'D:' is treated as the
+  host component, and is taken away. Thus, cURL tries to open '/blah.txt'.
+  If your system is installed to drive C:, that will resolve to 'C:\blah.txt',
+  and if that doesn't exist you will get the not found error.
+
+  To fix this problem, use file:// URLs with *three* leading slashes:
+
+  file:///D:/blah.txt
+
+  Alternatively, if it makes more sense, specify 'localhost' as the host
+  component:
+
+  file://localhost/D:/blah.txt
+
+  In either case, cURL should now be looking for the correct file.
 
 5. libcurl Issues
 

docs/INSTALL

@@ -874,9 +874,9 @@ REDUCING SIZE
    .comment section).
 
    Using these techniques it is possible to create a basic HTTP-only shared
-   libcurl library for i386 Linux platforms that is only 94 KiB in size, and
-   an FTP-only library that is 87 KiB in size (as of libcurl version 7.19.1,
-   using gcc 4.2.2).
+   libcurl library for i386 Linux platforms that is only 98 KiB in size, and
+   an FTP-only library that is 94 KiB in size (as of libcurl version 7.20.0,
+   using gcc 4.3.3).
 
    You may find that statically linking libcurl to your application will
    result in a lower total size than dynamically linking.

docs/KNOWN_BUGS

@@ -3,6 +3,12 @@ join in and help us correct one or more of these! Also be sure to check the
 changelog of the current development status, as one or more of these problems
 may have been fixed since this was written!
 
+74. The HTTP spec allows headers to be merged and become comma-separated
+  instead of being repeated several times. This also include Authenticate: and
+  Proxy-Authenticate: headers and while this hardly every happens in real life
+  it will confuse libcurl which does not properly support it for all headers -
+  like those Authenticate headers.
+
 73. if a connection is made to a FTP server but the server then just never
   sends the 220 response or otherwise is dead slow, libcurl will not
   acknowledge the connection timeout during that phase but only the "real"
@@ -13,12 +19,6 @@ may have been fixed since this was written!
 72. "Pausing pipeline problems."
   http://curl.haxx.se/mail/lib-2009-07/0214.html
 
-71. TFTP block size / better integration in transfer
-  http://curl.haxx.se/mail/lib-2009-08/0028.html
-
-  Related problems with TFTP is also that currently (7.19.6) upload file sizes
-  are limited to 32MB (http://curl.haxx.se/bug/view.cgi?id=2848436)
-
 70. Problem re-using easy handle after call to curl_multi_remove_handle
   http://curl.haxx.se/mail/lib-2009-07/0249.html
     
@@ -40,11 +40,6 @@ may have been fixed since this was written!
   properly wait for the connect to be confirmed. See test case 564 for a first
   shot at a test case.
 
-64. The threaded resolver used in libcurl on Windows has some kind of race
-  problem when multiple simultanoes resolves are done, like with the multi
-  interface transferring many files in parallell:
-  http://curl.haxx.se/mail/lib-2009-04/0028.html
-
 63. When CURLOPT_CONNECT_ONLY is used, the handle cannot reliably be re-used
   for any further requests or transfers. The work-around is then to close that
   handle with curl_easy_cleanup() and create a new. Some more details:

docs/THANKS

@@ -106,6 +106,7 @@ Chris Deidun
 Chris Flerackers
 Chris Gaukroger
 Chris Maltby
+Chris Mumford
 Christian Krause
 Christian Kurz
 Christian Robottom Reis
@@ -176,6 +177,7 @@ David Wright
 David Yan
 Dengminwen
 Detlef Schmier
+Didier Brisebourg
 Diego Casorran
 Dima Barsky
 Dimitris Sarris
@@ -241,6 +243,7 @@ Fred Machado
 Fred New
 Fred Noz
 Frederic Lepied
+Gabriel Kuri
 Gary Maxwell
 Gautam Kachroo
 Gautam Mani
@@ -270,11 +273,11 @@ Greg Onufer
 Greg Zavertnik
 Grigory Entin
 Guenole Bescon
+Guenter Knauf
 Guillaume Arluison
 Gustaf Hui
 Gwenole Beauchesne
 G<EFBFBD>tz Babin-Ebell
-G<EFBFBD>nter Knauf
 Hamish Mackenzie
 Hang Kin Lau
 Hanno Kranzhoff
@@ -350,12 +353,14 @@ Johan Anderson
 Johan Nilsson
 Johan van Selst
 John Crow
+John Dennis
 John E. Malmberg
 John Janssen
 John Kelly
 John Lask
 John Lightsey
 John McGowan
+John P. McCaskey
 John Wilkinson
 Johnny Luong
 Jon Grubbs
@@ -374,6 +379,7 @@ Judson Bishop
 Juergen Wilke
 Jukka Pihl
 Julian Noble
+Julien Chaffraix
 Jun-ichiro itojun Hagino
 Jurij Smakov
 Justin Fletcher
@@ -395,6 +401,7 @@ Ken Hirsch
 Ken Rastatter
 Kent Boortz
 Keshav Krity
+Kevin Baughman
 Kevin Fisk
 Kevin Lussier
 Kevin Reed
@@ -406,6 +413,7 @@ Kjetil Jacobsen
 Klevtsov Vadim
 Kris Kennaway
 Krishnendu Majumdar
+Krister Johansen
 Kristian Gunstone
 Kristian K<>hntopp
 Kyle Sallee
@@ -428,6 +436,7 @@ Linas Vepstas
 Ling Thio
 Linus Nielsen Feltzing
 Lisa Xu
+Liza Alenchery
 Loic Dachary
 Loren Kirkby
 Luca Altea
@@ -486,6 +495,7 @@ Michael Jahn
 Michael Jerris
 Michael Mealling
 Michael Smith
+Michael Stillwell
 Michael Wallner
 Michal Bonino
 Michal Marek
@@ -587,6 +597,7 @@ Ralph Mitchell
 Ramana Mokkapati
 Randy McMurchy
 Ravi Pratap
+Ray Dassen
 Ray Pekowski
 Reinout van Schouwen
 Renaud Chaillat
@@ -661,6 +672,7 @@ Sonia Subramanian
 Spacen Jasset
 Spiridonoff A.V
 Stadler Stephan
+Stan van de Burgt
 Stefan Esser
 Stefan Krause
 Stefan Teleman
@@ -679,6 +691,7 @@ Steve Roskowski
 Steven Bazyl
 Steven G. Johnson
 Stoned Elipot
+Sven Anders
 Sven Neuhaus
 Sven Wegener
 S<EFBFBD>bastien Willemijns
@@ -704,6 +717,7 @@ Tom Benoist
 Tom Lee
 Tom Mattison
 Tom Moers
+Tom Mueller
 Tom Regner
 Tom Zerucha
 Tomas Pospisek

docs/TODO

@@ -37,8 +37,7 @@
  5. HTTP
  5.1 Better persistency for HTTP 1.0
  5.2 support FF3 sqlite cookie files
- 5.3 Sort outgoing cookies
- 5.4 Rearrange request header order
+ 5.3 Rearrange request header order
 
  6. TELNET
  6.1 ditch stdin
@@ -105,6 +104,7 @@
  15.4 remove several functions
  15.5 remove CURLOPT_FAILONERROR
  15.6 remove CURLOPT_DNS_USE_GLOBAL_CACHE
+ 15.7 remove progress meter from libcurl
 
 ==============================================================================
 
@@ -237,14 +237,7 @@
  We should consider how (lib)curl can/should support this.
  http://curl.haxx.se/bug/feature.cgi?id=1871388
 
-5.3 Sort outgoing cookies
-
- All the major browsers sort the cookies sent in the Cookie: header based on
- the length of the path for which the cookie is set with. This could lead to
- a small fraction of servers to not play well with curl:
- http://www.ietf.org/mail-archive/web/http-state/current/msg00150.html
-
-5.4 Rearrange request header order
+5.3 Rearrange request header order
 
  Server implementors often make an effort to detect browser and to reject
  clients it can detect to not match. One of the last details we cannot yet
@@ -585,3 +578,13 @@ to provide the data to send.
  Remove support for a global DNS cache. Anything global is silly, and we
  already offer the share interface for the same functionality but done
  "right".
+
+15.7 remove progress meter from libcurl
+
+ The internally provided progress meter output doesn't belong in the library.
+ Basically no application wants it (apart from curl) but instead applications
+ can and should do their own progress meters using the progress callback.
+
+ The progress callback should then be bumped as well to get proper 64bit
+ variable types passed to it instead of doubles so that big files work
+ correctly.

docs/curl-config.1

@@ -42,6 +42,8 @@ Specify the oldest possible libcurl version string you want, and this
 script will return 0 if the current installation is new enough or it 
 returns 1 and outputs a text saying that the current version is not new 
 enough. (Added in 7.15.4)
+.IP "--configure"
+Displays the arguments given to configure when building curl.
 .IP "--feature"
 Lists what particular main features the installed libcurl was built with. At
 the time of writing, this list may include SSL, KRB4 or IPv6. Do not assume

docs/curl.1

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH curl 1 "10 July 2008" "Curl 7.19.0" "Curl Manual"
+.TH curl 1 "28 November 2009" "Curl 7.20.0" "Curl Manual"
 .SH NAME
 curl \- transfer a URL
 .SH SYNOPSIS
@@ -461,19 +461,29 @@ will re-use the same IP address it already uses for the control
 connection. (Added in 7.14.2)
 
 This option has no effect if PORT, EPRT or EPSV is used instead of PASV.
-.IP "--ftp-ssl"
-(FTP) Try to use SSL/TLS for the FTP connection.  Reverts to a non-secure
-connection if the server doesn't support SSL/TLS.  See also
-\fI--ftp-ssl-control\fP and \fI--ftp-ssl-reqd\fP for different levels of
-encryption required. (Added in 7.11.0)
+.IP "--ftp-pret"
+(FTP) Tell curl to send a PRET command before PASV (and EPSV). Certain
+FTP servers, mainly drftpd, require this non-standard command for
+directory listings as well as up and downloads in PASV mode.
+(Added in 7.20.x)
+.IP "--ssl"
+(FTP, POP3, IMAP, SMTP) Try to use SSL/TLS for the connection.  Reverts to a
+non-secure connection if the server doesn't support SSL/TLS.  See also
+\fI--ftp-ssl-control\fP and \fI--ssl-reqd\fP for different levels of
+encryption required. (Added in 7.20.0)
+
+This option was formerly known as \fI--ftp-ssl\fP (Added in 7.11.0) and that
+can still be used but will be removed in a future version.
 .IP "--ftp-ssl-control"
 (FTP) Require SSL/TLS for the FTP login, clear for transfer.  Allows secure
 authentication, but non-encrypted data transfers for efficiency.  Fails the
 transfer if the server doesn't support SSL/TLS.  (Added in 7.16.0)
-.IP "--ftp-ssl-reqd"
-(FTP) Require SSL/TLS for the FTP connection.
-Terminates the connection if the server doesn't support SSL/TLS.
-(Added in 7.15.5)
+.IP "--ssl-reqd"
+(FTP, POP3, IMAP, SMTP) Require SSL/TLS for the connection.  Terminates the
+connection if the server doesn't support SSL/TLS. (Added in 7.20.0)
+
+This option was formerly known as \fI--ftp-ssl-reqd\fP (added in 7.15.5) and
+that can still be used but will be removed in a future version.
 .IP "--ftp-ssl-ccc"
 (FTP) Use CCC (Clear Command Channel)
 Shuts down the SSL/TLS layer after authenticating. The rest of the
@@ -598,6 +608,9 @@ time only.
 make it discard all "session cookies". This will basically have the same effect
 as if a new session is started. Typical browsers always discard session
 cookies when they're closed down.
+.IP "-J/--remote-header-name"
+(HTTP) This option tells the -O/--remote-name option to use the server-specified
+Content-Disposition filename instead of extracting a filename from the URL.
 .IP "-k/--insecure"
 (SSL) This option explicitly allows curl to perform "insecure" SSL connections
 and transfers. All SSL connections are attempted to be made secure by using
@@ -756,7 +769,15 @@ password to all hosts that the site may redirect to. This may or may not
 introduce a security breach if the site redirects you to a site to which
 you'll send your authentication info (which is plaintext in the case of HTTP
 Basic authentication).
+.IP "--mail-rcpt <address>"
+(SMTP) Specify a single address that the given mail should get sent to. This
+option can be used multiple times to specify many recipients.
 
+(Added in 7.20.0)
+.IP "--mail-from <address>"
+(SMTP) Specify a single address that the given mail should get sent from.
+
+(Added in 7.20.0)
 .IP "--max-filesize <bytes>"
 Specify the maximum size (in bytes) of a file to download. If the file
 requested is larger than this value, the transfer will not start and curl will
@@ -1079,7 +1100,7 @@ timestamp.
 If a transient error is returned when curl tries to perform a transfer, it
 will retry this number of times before giving up. Setting the number to 0
 makes curl do no retries (which is the default). Transient error means either:
-a timeout, an FTP 5xx response code or an HTTP 5xx response code.
+a timeout, an FTP 4xx response code or an HTTP 5xx response code.
 
 When curl is about to retry a transfer, it will first wait one second and then
 for all forthcoming retries it will double the waiting time until it reaches
@@ -1149,6 +1170,8 @@ mutually exclusive.
 If this option is used several times, the last one will be used. (This option
 was previously wrongly documented and used as --socks without the number
 appended.)
+
+This option (as well as \fI--socks4\fP) does not work with IPV6, FTPS or LDAP.
 .IP "--socks5-gssapi-service <servicename>"
 The default service name for a socks server is rcmd/server-fqdn. This option
 allows you to change it.
@@ -1181,6 +1204,14 @@ TTYPE=<term> Sets the terminal type.
 XDISPLOC=<X display> Sets the X display location.
 
 NEW_ENV=<var,val> Sets an environment variable.
+.IP "--tftp-blksize <value>"
+(TFTP) Set TFTP BLKSIZE option (must be >512). This is the block size that
+curl will try to use when tranferring data to or from a TFTP server. By
+default 512 bytes will be used.
+
+If this option is used several times, the last one will be used.
+
+(Added in 7.20.0)
 .IP "-T/--upload-file <file>"
 This transfers the specified local file to the remote URL. If there is no file
 part in the specified URL, Curl will append the local file name. NOTE that you

docs/examples/Makefile.am

@@ -12,10 +12,12 @@ EXTRA_DIST = README Makefile.example Makefile.inc Makefile.m32 \
 # being currently built and tested are searched before the library which
 # might possibly already be installed in the system.
 #
-# $(top_builddir)/include is for libcurl's generated curl/curlbuild.h file
+# $(top_builddir)/include/curl for generated curlbuild.h included from curl.h
+# $(top_builddir)/include for generated curlbuild.h included from lib/setup.h
 # $(top_srcdir)/include is for libcurl's external include files
 
-INCLUDES = -I$(top_builddir)/include \
+INCLUDES = -I$(top_builddir)/include/curl \
+           -I$(top_builddir)/include      \
            -I$(top_srcdir)/include
 
 LIBDIR = $(top_builddir)/lib

docs/examples/curlx.c

@@ -453,7 +453,7 @@ int main(int argc, char **argv) {
   {
     FILE *outfp;
     BIO_get_fp(out,&outfp);
-    curl_easy_setopt(p.curl, CURLOPT_FILE,outfp);
+    curl_easy_setopt(p.curl, CURLOPT_WRITEDATA, outfp);
   }
 
   res = curl_easy_setopt(p.curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun)  ;

docs/examples/multi-app.c

@@ -105,20 +105,23 @@ int main(int argc, char **argv)
   /* See how the transfers went */
   while ((msg = curl_multi_info_read(multi_handle, &msgs_left))) {
     if (msg->msg == CURLMSG_DONE) {
+      int idx, found = 0;
 
-       int idx, found = 0;
+      /* Find out which handle this message is about */
+      for (idx=0; idx<HANDLECOUNT; idx++) {
+        found = (msg->easy_handle == handles[idx]);
+        if(found)
+          break;
+      }
 
-       /* Find out which handle this message is about */
-       for (idx=0; (!found && (idx<HANDLECOUNT)); idx++) found = (msg->easy_handle == handles[idx]);
-
-       switch (idx) {
-         case HTTP_HANDLE:
-           printf("HTTP transfer completed with status %d\n", msg->data.result);
-           break;
-         case FTP_HANDLE:
-           printf("FTP transfer completed with status %d\n", msg->data.result);
-           break;
-       }
+      switch (idx) {
+      case HTTP_HANDLE:
+        printf("HTTP transfer completed with status %d\n", msg->data.result);
+        break;
+      case FTP_HANDLE:
+        printf("FTP transfer completed with status %d\n", msg->data.result);
+        break;
+      }
     }
   }
 

docs/libcurl/curl_easy_getinfo.3

@@ -209,6 +209,28 @@ the previous request didn't match (see \fICURLOPT_TIMECONDITION\fP). Alas, if
 this returns a 1 you know that the reason you didn't get data in return is
 because it didn't fulfill the condition. The long ths argument points to will
 get a zero stored if the condition instead was met. (Added in 7.19.4)
+.IP CURLINFO_RTSP_SESSION_ID
+Pass a pointer to a char pointer to receive a pointer to a string holding the
+most recent RTSP Session ID.
+
+Applications wishing to resume an RTSP session on another connection should
+retreive this info before closing the active connection.
+.IP CURLINFO_RTSP_CLIENT_CSEQ
+Pass a pointer to a long to receive the next CSeq that will be used by the
+application. 
+.IP CURLINFO_RTSP_SERVER_CSEQ
+Pass a pointer to a long to receive the next server CSeq that will be expected
+by the application. 
+
+\fI(NOTE: listening for server initiated requests is currently
+unimplemented).\fP
+
+Applications wishing to resume an RTSP session on another connection should
+retreive this info before closing the active connection.
+.IP CURLINFO_RTSP_CSEQ_RECV
+Pass a pointer to a long to receive the most recently received CSeq from the
+server. If your application encounters a \fICURLE_RTSP_CSEQ_ERROR\fP then you
+may wish to troubleshoot and/or fix the CSeq mismatch by peeking at this value.
 .SH TIMES
 .nf
 An overview of the six time values available from curl_easy_getinfo()

docs/libcurl/curl_easy_setopt.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH curl_easy_setopt 3 "11 Dec 2008" "libcurl 7.19.3" "libcurl Manual"
+.TH curl_easy_setopt 3 "1 Jan 2010" "libcurl 7.20.0" "libcurl Manual"
 .SH NAME
 curl_easy_setopt \- set options for a curl easy handle
 .SH SYNOPSIS
@@ -49,8 +49,8 @@ thus the string storage associated to the pointer argument may be overwritten
 after curl_easy_setopt() returns. Exceptions to this rule are described in
 the option details below.
 
-NOTE: before 7.17.0 strings were not copied. Instead the user was forced keep
-them available until libcurl no longer needed them.
+Before version 7.17.0, strings were not copied. Instead the user was forced
+keep them available until libcurl no longer needed them.
 
 The \fIhandle\fP is the return code from a \fIcurl_easy_init(3)\fP or
 \fIcurl_easy_duphandle(3)\fP call.
@@ -347,9 +347,9 @@ This function will get called on all new connections made to a server, during
 the SSL negotiation. The SSL_CTX pointer will be a new one every time.
 
 To use this properly, a non-trivial amount of knowledge of the openssl
-libraries is necessary. For example, using this function allows you to use openssl
-callbacks to add additional validation code for certificates, and even to
-change the actual URI of an HTTPS request (example used in the lib509 test
+libraries is necessary. For example, using this function allows you to use
+openssl callbacks to add additional validation code for certificates, and even
+to change the actual URI of an HTTPS request (example used in the lib509 test
 case).  See also the example section for a replacement of the key, certificate
 and trust file settings.
 .IP CURLOPT_SSL_CTX_DATA
@@ -401,6 +401,30 @@ follows:
 
 You will need to override these definitions if they are different on your
 system.
+.IP CURLOPT_INTERLEAVEFUNCTION
+Function pointer that should match the following prototype: \fIsize_t
+function( void *ptr, size_t size, size_t nmemb, void *stream)\fP. This
+function gets called by libcurl as soon as it has received interleaved RTP
+data. This function gets called for each $ block and therefore contains
+exactly one upper-layer protocol unit (e.g.  one RTP packet). Curl writes the
+interleaved header as well as the included data for each call. The first byte
+is always an ASCII dollar sign. The dollar sign is followed by a one byte
+channel identifier and then a 2 byte integer length in network byte order. See
+\fIRFC 2326 Section 10.12\fP for more information on how RTP interleaving
+behaves. If unset or set to NULL, curl will use the default write function.
+
+Interleaved RTP poses some challeneges for the client application. Since the
+stream data is sharing the RTSP control connection, it is critical to service
+the RTP in a timely fashion. If the RTP data is not handled quickly,
+subsequent response processing may become unreasonably delayed and the
+connection may close. The application may use \fICURL_RTSPREQ_RECEIVE\fP to
+service RTP data when no requests are desired. If the application makes a
+request, (e.g.  \fICURL_RTSPREQ_PAUSE\fP) then the response handler will
+process any pending RTP data before marking the request as finished.  (Added
+in 7.20.0)
+.IP CURLOPT_INTERLEAVEDATA
+This is the stream that will be passed to \fICURLOPT_INTERLEAVEFUNCTION\fP when
+interleaved RTP data is received. (Added in 7.20.0)
 .SH ERROR OPTIONS
 .IP CURLOPT_ERRORBUFFER
 Pass a char * to a buffer that the libcurl may store human readable error
@@ -449,6 +473,9 @@ on which protocols are supported.
 The string given to CURLOPT_URL must be url-encoded and follow RFC 2396
 (http://curl.haxx.se/rfc/rfc2396.txt).
 
+Starting with version 7.20.0, the fragment part of the URI will not be send as
+part of the path, which was the case previously.
+
 \fICURLOPT_URL\fP is the only option that \fBmust\fP be set before
 \fIcurl_easy_perform(3)\fP is called.
 
@@ -537,23 +564,23 @@ name.
 Pass a long. This sets the local port number of the socket used for
 connection. This can be used in combination with \fICURLOPT_INTERFACE\fP and
 you are recommended to use \fICURLOPT_LOCALPORTRANGE\fP as well when this is
-set. Note that the only valid port numbers are 1 - 65535. (Added in 7.15.2)
+set. Valid port numbers are 1 - 65535. (Added in 7.15.2)
 .IP CURLOPT_LOCALPORTRANGE
 Pass a long. This is the number of attempts libcurl should make to find a
 working local port number. It starts with the given \fICURLOPT_LOCALPORT\fP
 and adds one to the number for each retry. Setting this to 1 or below will
-make libcurl do only one try for the exact port number. Note that port numbers
-by nature are scarce resources that will be busy at times so setting this
-value to something too low might cause unnecessary connection setup
-failures. (Added in 7.15.2)
+make libcurl do only one try for the exact port number. Port numbers by nature
+are scarce resources that will be busy at times so setting this value to
+something too low might cause unnecessary connection setup failures. (Added in
+7.15.2)
 .IP CURLOPT_DNS_CACHE_TIMEOUT
 Pass a long, this sets the timeout in seconds. Name resolves will be kept in
 memory for this number of seconds. Set to zero to completely disable
 caching, or set to -1 to make the cached entries remain forever. By default,
 libcurl caches this info for 60 seconds.
 
-NOTE: the name resolve functions of various libc implementations don't re-read
-name server information unless explicitly told so (for example, by calling
+The name resolve functions of various libc implementations don't re-read name
+server information unless explicitly told so (for example, by calling
 \fIres_init(3)\fP). This may cause libcurl to keep using the older server even
 if DHCP has updated the server info, and this may look like a DNS cache issue
 to the casual libcurl-app user.
@@ -674,12 +701,12 @@ Pass a char * as parameter, which should be pointing to the zero terminated
 user name to use for the transfer while connecting to Proxy.
 
 The CURLOPT_PROXYUSERNAME option should be used in same way as the
-\fICURLOPT_PROXYUSERPWD\fP is used.  In comparison to \fICURLOPT_PROXYUSERPWD\fP
-the CURLOPT_PROXYUSERNAME allows the username to contain a colon,
-like in the following example: "sip:user@example.com".
-Note the CURLOPT_PROXYUSERNAME option is an alternative way to set the user name
-while connecting to Proxy.  There is no meaning to use it together
-with the \fICURLOPT_PROXYUSERPWD\fP option.
+\fICURLOPT_PROXYUSERPWD\fP is used.  In comparison to
+\fICURLOPT_PROXYUSERPWD\fP the CURLOPT_PROXYUSERNAME allows the username to
+contain a colon, like in the following example: "sip:user@example.com". The
+CURLOPT_PROXYUSERNAME option is an alternative way to set the user name while
+connecting to Proxy.  There is no meaning to use it together with the
+\fICURLOPT_PROXYUSERPWD\fP option.
 
 In order to specify the password to be used in conjunction with the user name
 use the \fICURLOPT_PROXYPASSWORD\fP option.  (Added in 7.19.1)
@@ -736,8 +763,8 @@ it finds suitable. libcurl will automatically select the one it finds most
 secure.
 .IP CURLAUTH_ANYSAFE
 This is a convenience macro that sets all bits except Basic and thus makes
-libcurl pick any it finds suitable. libcurl will automatically select the one it
-finds most secure.
+libcurl pick any it finds suitable. libcurl will automatically select the one
+it finds most secure.
 .RE
 .IP CURLOPT_PROXYAUTH
 Pass a long as parameter, which is set to a bitmask, to tell libcurl which
@@ -775,7 +802,7 @@ and follow new Location: headers all the way until no more such headers are
 returned. \fICURLOPT_MAXREDIRS\fP can be used to limit the number of redirects
 libcurl will follow.
 
-NOTE: since 7.19.4, libcurl can limit to what protocols it will automatically
+Since 7.19.4, libcurl can limit what protocols it will automatically
 follow. The accepted protocols are set with \fICURLOPT_REDIR_PROTOCOLS\fP and
 it excludes the FILE protocol by default.
 .IP CURLOPT_UNRESTRICTED_AUTH
@@ -851,7 +878,7 @@ re-used handle, you must explicitly set the new request type using
 Pass a void * as parameter, which should be the full data to post in an HTTP
 POST operation. You must make sure that the data is formatted the way you want
 the server to receive it. libcurl will not convert or encode it for you. Most
-web servers will assume this data to be url-encoded. Take note.
+web servers will assume this data to be url-encoded.
 
 The pointed data are NOT copied by the library: as a consequence, they must
 be preserved by the calling application until the transfer finishes.
@@ -970,9 +997,9 @@ option and thus you need to concatenate them all in one single string. Set
 multiple cookies in one string like this: "name1=content1; name2=content2;"
 etc.
 
-Note that this option sets the cookie header explictly in the outgoing
-request(s). If multiple requests are done due to authentication, followed
-redirections or similar, they will all get this cookie passed on.
+This option sets the cookie header explictly in the outgoing request(s). If
+multiple requests are done due to authentication, followed redirections or
+similar, they will all get this cookie passed on.
 
 Using this option multiple times will only make the latest string override the
 previous ones.
@@ -1045,16 +1072,29 @@ progress, and will simply stop the download when the server ends the
 connection. (added in 7.14.1)
 .IP CURLOPT_HTTP_CONTENT_DECODING
 Pass a long to tell libcurl how to act on content decoding. If set to zero,
-content decoding will be disabled. If set to 1 it is enabled. Note however
-that libcurl has no default content decoding but requires you to use
-\fICURLOPT_ENCODING\fP for that. (added in 7.16.2)
+content decoding will be disabled. If set to 1 it is enabled. Libcurl has no
+default content decoding but requires you to use \fICURLOPT_ENCODING\fP for
+that. (added in 7.16.2)
 .IP CURLOPT_HTTP_TRANSFER_DECODING
 Pass a long to tell libcurl how to act on transfer decoding. If set to zero,
 transfer decoding will be disabled, if set to 1 it is enabled
 (default). libcurl does chunked transfer decoding by default unless this
 option is set to zero. (added in 7.16.2)
+.SH SMTP OPTIONS
+.IP CURLOPT_MAIL_FROM
+Pass a pointer to a zero terminated string as parameter. It will be used to
+specify the sender address in a mail when sending an SMTP mail with libcurl.
+
+(Added in 7.20.0)
+.IP CURLOPT_MAIL_RCPT
+Pass a pointer to a linked list of recipients to pass to the server in your
+SMTP mail request.  The linked list should be a fully valid list of \fBstruct
+curl_slist\fP structs properly filled in. Use \fIcurl_slist_append(3)\fP to
+create the list and \fIcurl_slist_free_all(3)\fP to clean up an entire list.
+
+(Added in 7.20.0)
 .SH TFTP OPTIONS
-.IP CURLOPT_TFTPBLKSIZE
+.IP CURLOPT_TFTP_BLKSIZE
 Specify block size to use for TFTP data transmission. Valid range as per RFC
 2348 is 8-65464 bytes. The default of 512 bytes will be used if this option is
 not specified. The specified block size will only be used pending support by
@@ -1147,6 +1187,11 @@ means that it will first attempt to use EPSV before using PASV, but if you
 pass zero to this option, it will not try using EPSV, only plain PASV.
 
 If the server is an IPv6 host, this option will have no effect as of 7.12.3.
+.IP CURLOPT_FTP_USE_PRET
+Pass a long. If the value is 1, it tells curl to send a PRET command before
+PASV (and EPSV). Certain FTP servers, mainly drftpd, require this non-standard
+command for directory listings as well as up and downloads in PASV mode. Has
+no effect when using the active FTP transfers mode.  (Added in 7.20.0)
 .IP CURLOPT_FTP_CREATE_MISSING_DIRS
 Pass a long. If the value is 1, curl will attempt to create any remote
 directory that it fails to CWD into. CWD is the command that changes working
@@ -1254,6 +1299,107 @@ file \&"normally" (like in the multicwd case). This is somewhat more standards
 compliant than 'nocwd' but without the full penalty of 'multicwd'.
 .RE
 (Added in 7.15.1)
+.SH RTSP OPTIONS
+.IP CURLOPT_RTSP_REQUEST
+Tell libcurl what kind of RTSP request to make. Pass one of the following RTSP
+enum values. Unless noted otherwise, commands require the Session ID to be
+initialized. (Added in 7.20.0)
+.RS
+.IP CURL_RTSPREQ_OPTIONS
+Used to retrieve the available methods of the server. The application is
+responsbile for parsing and obeying the response. \fB(The session ID is not
+needed for this method.)\fP  (Added in 7.20.0)
+.IP CURL_RTSPREQ_DESCRIBE
+Used to get the low level description of a stream. The application should note
+what formats it understands in the \fI'Accept:'\fP header. Unless set
+manually, libcurl will automatically fill in \fI'Accept:
+application/sdp'\fP. Time-condition headers will be added to Describe requests
+if the \fICURLOPT_TIMECONDITION\fP option is active. \fB(The session ID is not
+needed for this method)\fP  (Added in 7.20.0)
+.IP CURL_RTSPREQ_ANNOUNCE
+When sent by a client, this method changes the description of the session. For
+example, if a client is using the server to record a meeting, the client can
+use Announce to inform the server of all the meta-information about the
+session.  ANNOUNCE acts like an HTTP PUT or POST just like
+\fICURL_RTSPREQ_SET_PARAMETER\fP (Added in 7.20.0)
+.IP CURL_RTSPREQ_SETUP
+Setup is used to initialize the transport layer for the session. The
+application must set the desired Transport options for a session by using the
+\fICURLOPT_RTSP_TRANSPORT\fP option prior to calling setup. If no session ID
+is currently set with \fICURLOPT_RTSP_SESSION_ID\fP, libcurl will extract and
+use the session ID in the response to this request. \fB(The session ID is not
+needed for this method).\fP  (Added in 7.20.0)
+.IP CURL_RTSPREQ_PLAY
+Send a Play command to the server. Use the \fICURLOPT_RANGE\fP option to
+modify the playback time (e.g. 'npt=10-15').  (Added in 7.20.0)
+.IP CURL_RTSPREQ_PAUSE
+Send a Pause command to the server. Use the \fICURLOPT_RANGE\fP option with a
+single value to indicate when the stream should be halted. (e.g. npt='25')
+(Added in 7.20.0)
+.IP CURL_RTSPREQ_TEARDOWN
+This command terminates an RTSP session. Simply closing a connection does not
+terminate the RTSP session since it is valid to control an RTSP session over
+different connections.  (Added in 7.20.0)
+.IP CURL_RTSPREQ_GET_PARAMETER
+Retrieve a parameter from the server. By default, libcurl will automatically
+include an \fIAccept: text/parameters\fP header unless a custom one is set.
+Applications wishing to send a heartbeat message (e.g. in the presence of a
+server-specified timeout) should send use an empty GET_PARAMETER request.
+(Added in 7.20.0)
+.IP CURL_RTSPREQ_SET_PARAMETER
+Set a parameter on the server. By default, libcurl will automatically include
+a \fIContent-Type: text/parameters\fP header unless a custom one is set. The
+interaction with SET_PARAMTER is much like an HTTP PUT or POST. An application
+may either use \fICURLOPT_UPLOAD\fP with \fICURLOPT_READDATA\fP like an HTTP
+PUT, or it may use \fICURLOPT_POSTFIELDS\fP like an HTTP POST. No chunked
+transfers are allowed, so the application must set the
+\fICURLOPT_INFILESIZE\fP in the former and \fICURLOPT_POSTFIELDSIZE\fP in the
+latter. Also, there is no use of multi-part POSTs within RTSP. (Added in
+7.20.0)
+.IP CURL_RTSPREQ_RECORD
+Used to tell the server to record a session. Use the \fICURLOPT_RANGE\fP
+option to modify the record time. (Added in 7.20.0)
+.IP CURL_RTSPREQ_RECEIVE
+This is a special request because it does not send any data to the server. The
+application may call this function in order to receive interleaved RTP
+data. It will return after processing one read buffer of data in order to give
+the application a chance to run. (Added in 7.20.0)
+.RE
+.IP CURLOPT_RTSP_SESSION_ID
+Pass a char * as a parameter to set the value of the current RTSP Session ID
+for the handle. Useful for resuming an in-progress session. Once this value is
+set to any non-NULL value, libcurl will return \fICURLE_RTSP_SESSION_ERROR\fP
+if ID received from the server does not match. If unset (or set to NULL),
+libcurl will automatically set the ID the first time the server sets it in a
+response. (Added in 7.20.0)
+.IP CURLOPT_RTSP_STREAM_URI
+Set the stream URI to operate on by passing a char * . For example, a single
+session may be controlling \fIrtsp://foo/twister/audio\fP and
+\fIrtsp://foo/twister/video\fP and the application can switch to the
+appropriate stream using this option. If unset, libcurl will default to
+operating on generic server options by passing '*' in the place of the RTSP
+Stream URI. This option is distinct from \fICURLOPT_URL\fP. When working with
+RTSP, the \fICURLOPT_STREAM_URI\fP indicates what URL to send to the server in
+the request header while the \fICURLOPT_URL\fP indicates where to make the
+connection to.  (e.g. the \fICURLOPT_URL\fP for the above examples might be
+set to \fIrtsp://foo/twister\fP (Added in 7.20.0)
+.IP CURLOPT_RTSP_TRANSPORT
+Pass a char * to tell libcurl what to pass for the Transport: header for this
+RTSP session. This is mainly a convenience method to avoid needing to set a
+custom Transport: header for every SETUP request. The application must set a
+Transport: header before issuing a SETUP request. (Added in 7.20.0)
+.IP CURLOPT_RTSP_HEADER
+This option is simply an alias for \fICURLOPT_HTTP_HEADER\fP. Use this to
+replace the standard headers that RTSP and HTTP share. It is also valid to use
+the shortcuts such as \fICURLOPT_USERAGENT\fP. (Added in 7.20.0)
+.IP CURLOPT_RTSP_CLIENT_CSEQ
+Manually set the the CSEQ number to issue for the next RTSP request. Useful if
+the application is resuming a previously broken connection. The CSEQ will
+increment from this new number henceforth. (Added in 7.20.0)
+.IP CURLOPT_RTSP_SERVER_CSEQ
+Manually set the CSEQ number to expect for the next RTSP Server->Client
+request.  At the moment, this feature (listening for Server requests) is
+unimplemented. (Added in 7.20.0)
 .SH PROTOCOL OPTIONS
 .IP CURLOPT_TRANSFERTEXT
 A parameter set to 1 tells the library to use ASCII mode for FTP transfers,
@@ -1280,9 +1426,14 @@ want. It should be in the format "X-Y", where X or Y may be left out. HTTP
 transfers also support several intervals, separated with commas as in
 \fI"X-Y,N-M"\fP. Using this kind of multiple intervals will cause the HTTP
 server to send the response document in pieces (using standard MIME separation
-techniques). Pass a NULL to this option to disable the use of ranges.
+techniques). For RTSP, the formatting of a range should follow RFC 2326
+Section 12.29. For RTSP, byte ranges are \fBnot\fP permitted. Instead, ranges
+should be given in npt, utc, or smpte formats.
 
-Ranges work on HTTP, FTP and FILE (since 7.18.0) transfers only.
+Pass a NULL to this option to disable the use of ranges.
+
+Ranges work on HTTP, FTP, FILE (since 7.18.0), and RTSP (since 7.20.0)
+transfers only.
 .IP CURLOPT_RESUME_FROM
 Pass a long as parameter. It contains the offset in number of bytes that you
 want the transfer to start from. Set this option to 0 to make the transfer
@@ -1341,8 +1492,8 @@ as a long. See also \fICURLOPT_INFILESIZE_LARGE\fP.
 For uploading using SCP, this option or \fICURLOPT_INFILESIZE_LARGE\fP is
 mandatory.
 
-Note that this option does not limit how much data libcurl will actually send,
-as that is controlled entirely by what the read callback returns.
+This option does not limit how much data libcurl will actually send, as that
+is controlled entirely by what the read callback returns.
 .IP CURLOPT_INFILESIZE_LARGE
 When uploading a file to a remote site, this option should be used to tell
 libcurl what the expected size of the infile is.  This value should be passed
@@ -1350,8 +1501,8 @@ as a curl_off_t. (Added in 7.11.0)
 
 For uploading using SCP, this option or \fICURLOPT_INFILESIZE\fP is mandatory.
 
-Note that this option does not limit how much data libcurl will actually send,
-as that is controlled entirely by what the read callback returns.
+This option does not limit how much data libcurl will actually send, as that
+is controlled entirely by what the read callback returns.
 .IP CURLOPT_UPLOAD
 A parameter set to 1 tells the library to prepare for an upload. The
 \fICURLOPT_READDATA\fP and \fICURLOPT_INFILESIZE\fP or
@@ -1387,7 +1538,8 @@ given limit. This concerns both FTP and HTTP transfers.
 .IP CURLOPT_TIMECONDITION
 Pass a long as parameter. This defines how the \fICURLOPT_TIMEVALUE\fP time
 value is treated. You can set this parameter to \fICURL_TIMECOND_IFMODSINCE\fP
-or \fICURL_TIMECOND_IFUNMODSINCE\fP. This feature applies to HTTP and FTP.
+or \fICURL_TIMECOND_IFUNMODSINCE\fP. This feature applies to HTTP, FTP, and
+RTSP.
 
 The last modification time of a file is not always known and in such instances
 this feature will have no effect even if the given time condition would not
@@ -1447,9 +1599,9 @@ If you already have performed transfers with this curl handle, setting a
 smaller MAXCONNECTS than before may cause open connections to get closed
 unnecessarily.
 
-Note that if you add this easy handle to a multi handle, this setting is not
-acknowledged, and you must instead use \fIcurl_multi_setopt(3)\fP and
-the \fICURLMOPT_MAXCONNECTS\fP option.
+If you add this easy handle to a multi handle, this setting is not
+acknowledged, and you must instead use \fIcurl_multi_setopt(3)\fP and the
+\fICURLMOPT_MAXCONNECTS\fP option.
 .IP CURLOPT_CLOSEPOLICY
 (Obsolete) This option does nothing.
 .IP CURLOPT_FRESH_CONNECT
@@ -1549,10 +1701,9 @@ operations.
 If the crypto device cannot be set, \fICURLE_SSL_ENGINE_SETFAILED\fP is
 returned.
 
-Note that even though this option doesn't need any parameter, in some
-configurations \fIcurl_easy_setopt\fP might be defined as a macro taking
-exactly three arguments. Therefore, it's recommended to pass 1 as parameter to
-this option.
+Even though this option doesn't need any parameter, in some configurations
+\fIcurl_easy_setopt\fP might be defined as a macro taking exactly three
+arguments. Therefore, it's recommended to pass 1 as parameter to this option.
 .IP CURLOPT_SSLVERSION
 Pass a long as parameter to control what version of SSL/TLS to attempt to use.
 The available options are:
@@ -1598,8 +1749,8 @@ combination with the \fICURLOPT_SSL_VERIFYPEER\fP option.  If
 \fICURLOPT_SSL_VERIFYPEER\fP is zero, \fICURLOPT_CAINFO\fP need not
 even indicate an accessible file.
 
-Note that option is by default set to the system path where libcurl's cacert
-bundle is assumed to be stored, as established at build time.
+This option is by default set to the system path where libcurl's cacert bundle
+is assumed to be stored, as established at build time.
 
 When built against NSS, this is the directory that the NSS certificate
 database resides in.
@@ -1608,8 +1759,8 @@ Pass a char * to a zero terminated string naming a file holding a CA
 certificate in PEM format. If the option is set, an additional check against
 the peer certificate is performed to verify the issuer is indeed the one
 associated with the certificate provided by the option. This additional check
-is useful in multi-level PKI where one needs to enforce that the peer certificate is
-from a specific branch of the tree.
+is useful in multi-level PKI where one needs to enforce that the peer
+certificate is from a specific branch of the tree.
 
 This option makes sense only when used in combination with the
 \fICURLOPT_SSL_VERIFYPEER\fP option. Otherwise, the result of the check is not
@@ -1644,8 +1795,8 @@ This option makes sense only when used in combination with the
 
 A specific error code (CURLE_SSL_CRL_BADFILE) is defined with the option. It
 is returned when the SSL exchange fails because the CRL file cannot be loaded.
-Note that a failure in certificate verification due to a revocation information
-found in the CRL does not trigger this specific error. (Added in 7.19.0)
+A failure in certificate verification due to a revocation information found in
+the CRL does not trigger this specific error. (Added in 7.19.0)
 .IP CURLOPT_CERTINFO
 Pass a long set to 1 to enable libcurl's certificate chain info gatherer. With
 this enabled, libcurl (if built with OpenSSL) will extract lots of information
@@ -1712,7 +1863,7 @@ You'll find more details about the NSS cipher lists on this URL:
 .IP CURLOPT_SSL_SESSIONID_CACHE
 Pass a long set to 0 to disable libcurl's use of SSL session-ID caching. Set
 this to 1 to enable it. By default all transfers are done using the
-cache. Note that while nothing ever should get hurt by attempting to reuse SSL
+cache. While nothing ever should get hurt by attempting to reuse SSL
 session-IDs, there seem to be broken SSL implementations in the wild that may
 require you to disable this in order for you to succeed. (Added in 7.16.0)
 .IP CURLOPT_KRBLEVEL
@@ -1740,9 +1891,9 @@ libcurl defaults to using \fB~/.ssh/id_dsa.pub\fP.
 (Added in 7.16.1)
 .IP CURLOPT_SSH_PRIVATE_KEYFILE
 Pass a char * pointing to a file name for your private key. If not used,
-libcurl defaults to using \fB~/.ssh/id_dsa\fP.
-If the file is password-protected, set the password with \fICURLOPT_KEYPASSWD\fP.
-(Added in 7.16.1)
+libcurl defaults to using \fB~/.ssh/id_dsa\fP.  If the file is
+password-protected, set the password with \fICURLOPT_KEYPASSWD\fP. (Added in
+7.16.1)
 .IP CURLOPT_SSH_KNOWNHOSTS
 Pass a pointer to a zero terminated string holding the file name of the
 known_host file to use.  The known_hosts file should use the OpenSSH file
@@ -1761,9 +1912,9 @@ MUST return one of the following return codes to tell libcurl how to act:
 .IP CURLKHSTAT_FINE_ADD_TO_FILE
 The host+key is accepted and libcurl will append it to the known_hosts file
 before continuing with the connection. This will also add the host+key combo
-to the known_host pool kept in memory if it wasn't already present there. Note
-that the adding of data to the file is done by completely replacing the file
-with a new copy, so the permissions of the file must allow this.
+to the known_host pool kept in memory if it wasn't already present there. The
+adding of data to the file is done by completely replacing the file with a new
+copy, so the permissions of the file must allow this.
 .IP CURLKHSTAT_FINE
 The host+key is accepted libcurl will continue with the connection. This will
 also add the host+key combo to the known_host pool kept in memory if it wasn't

docs/libcurl/curl_multi_fdset.3

@@ -21,21 +21,22 @@ but be sure to FD_ZERO them before calling this function as
 otherwise remove any others. The \fIcurl_multi_perform(3)\fP function should be
 called as soon as one of them is ready to be read from or written to.
 
+To be sure to have up-to-date results, you should call
+\fIcurl_multi_perform\fP until it does not return CURLM_CALL_MULTI_PERFORM
+prior to calling \fIcurl_multi_fdset\fP.  This will make sure that libcurl has
+updated the handles' socket states.
+
 If no file descriptors are set by libcurl, \fImax_fd\fP will contain -1 when
 this function returns. Otherwise it will contain the higher descriptor number
 libcurl set.
 
-You should also be aware that when doing select(), you should consider using a
-rather small (single-digit number of seconds) timeout and call
-\fIcurl_multi_perform\fP regularly - even if no activity has been seen on the
-fd_sets - as otherwise libcurl-internal retries and timeouts may not work as
-you'd think and want.
-
-Starting with libcurl 7.16.0, you should use \fBcurl_multi_timeout\fP to
-figure out how long to wait for action.
+When doing select(), you should use \fBcurl_multi_timeout\fP to figure out how
+long to wait for action. Call \fIcurl_multi_perform\fP even if no activity has
+been seen on the fd_sets after the timeout expires as otherwise internal
+retries and timeouts may not work as you'd think and want.
 .SH RETURN VALUE
 CURLMcode type, general libcurl multi interface error code. See
 \fIlibcurl-errors(3)\fP
 .SH "SEE ALSO"
-.BR curl_multi_cleanup "(3)," curl_multi_init "(3), "
-.BR curl_multi_timeout "(3) "
+.BR curl_multi_cleanup "(3), " curl_multi_init "(3), "
+.BR curl_multi_timeout "(3), " curl_multi_perform "(3) "

docs/libcurl/curl_multi_perform.3

@@ -22,25 +22,26 @@ changed from the previous call (or is less than the amount of easy handles
 you've added to the multi handle), you know that there is one or more
 transfers less "running". You can then call \fIcurl_multi_info_read(3)\fP to
 get information about each individual completed transfer, and that returned
-info includes CURLcode and more.
+info includes CURLcode and more. If an added handle fails very quickly, it may
+never be counted as a running_handle.
 
 When \fIrunning_handles\fP is set to zero (0) on the return of this function,
 there is no longer any transfers in progress.
 .SH "RETURN VALUE"
 CURLMcode type, general libcurl multi interface error code.
 
-If you receive \fICURLM_CALL_MULTI_PERFORM\fP, this basically means that you
-should call \fIcurl_multi_perform\fP again, before you select() on more
-actions. You don't have to do it immediately, but the return code means that
-libcurl may have more data available to return or that there may be more data
-to send off before it is "satisfied". Do note that \fIcurl_multi_perform(3)\fP
-will return \fICURLM_CALL_MULTI_PERFORM\fP only when it wants to be called
-again \fBimmediately\fP. When things are fine and there is nothing immediate
-it wants done, it'll return \fICURLM_OK\fP and you need to wait for \&"action"
-and then call this function again.
+Before version 7.20.0: If you receive \fICURLM_CALL_MULTI_PERFORM\fP, this
+basically means that you should call \fIcurl_multi_perform\fP again, before
+you select() on more actions. You don't have to do it immediately, but the
+return code means that libcurl may have more data available to return or that
+there may be more data to send off before it is "satisfied". Do note that
+\fIcurl_multi_perform(3)\fP will return \fICURLM_CALL_MULTI_PERFORM\fP only
+when it wants to be called again \fBimmediately\fP. When things are fine and
+there is nothing immediate it wants done, it'll return \fICURLM_OK\fP and you
+need to wait for \&"action" and then call this function again.
 
-NOTE that this only returns errors etc regarding the whole multi stack. Problems
-still might have occurred on individual transfers even when this
+This function only returns errors etc regarding the whole multi stack.
+Problems still might have occurred on individual transfers even when this
 function returns \fICURLM_OK\fP.
 .SH "TYPICAL USAGE"
 Most applications will use \fIcurl_multi_fdset(3)\fP to get the multi_handle's

docs/libcurl/curl_multi_socket_action.3

@@ -22,8 +22,8 @@ CURL_CSELECT_ERR. When the events on a socket are unknown, pass 0 instead, and
 libcurl will test the descriptor internally.
 
 At return, the integer \fBrunning_handles\fP points to will contain the number
-of still running easy handles within the multi handle. When this number
-reaches zero, all transfers are complete/done. Note that when you call
+of running easy handles within the multi handle. When this number reaches
+zero, all transfers are complete/done. When you call
 \fIcurl_multi_socket_action(3)\fP on a specific socket and the counter
 decreases by one, it DOES NOT necessarily mean that this exact socket/transfer
 is the one that completed. Use \fIcurl_multi_info_read(3)\fP to figure out
@@ -89,19 +89,16 @@ The \fIuserp\fP argument is a private pointer you have previously set with
 .SH "RETURN VALUE"
 CURLMcode type, general libcurl multi interface error code.
 
-Legacy: If you receive \fICURLM_CALL_MULTI_PERFORM\fP, this basically means
-that you should call \fIcurl_multi_socket_action(3)\fP again, before you wait
-for more actions on libcurl's sockets. You don't have to do it immediately,
-but the return code means that libcurl may have more data available to return
-or that there may be more data to send off before it is "satisfied".
+Before version 7.20.0: If you receive \fICURLM_CALL_MULTI_PERFORM\fP, this
+basically means that you should call \fIcurl_multi_socket_action(3)\fP again
+before you wait for more actions on libcurl's sockets. You don't have to do it
+immediately, but the return code means that libcurl may have more data
+available to return or that there may be more data to send off before it is
+"satisfied".
 
-In modern libcurls, \fICURLM_CALL_MULTI_PERFORM\fP or
-\fICURLM_CALL_MULTI_SOKCET\fP should not be returned and no application needs
-to care about them.
-
-NOTE that the return code is for the whole multi stack. Problems still might have
-occurred on individual transfers even when one of these functions
-return OK.
+The return code from this function is for the whole multi stack.  Problems
+still might have occurred on individual transfers even when one of these
+functions return OK.
 .SH "TYPICAL USAGE"
 1. Create a multi handle
 

docs/libcurl/libcurl-errors.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2008, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH libcurl-errors 3 "8 Jun 2008" "libcurl 7.19.0" "libcurl errors"
+.TH libcurl-errors 3 "1 Jan 2010" "libcurl 7.20.0" "libcurl errors"
 .SH NAME
 libcurl-errors \- error codes in libcurl
 .SH DESCRIPTION
@@ -70,6 +70,11 @@ either a PASV or a EPSV command. The server is flawed.
 .IP "CURLE_FTP_WEIRD_227_FORMAT (14)"
 FTP servers return a 227-line as a response to a PASV command. If libcurl
 fails to parse that line, this return code is passed back.
+.IP "CURLE_FTP_PRET_FAILED (84)"
+The FTP server does not understand the PRET command at all or does not support
+the given argument. Be careful when using \fICURLOPT_CUSTOMREQUEST\fP, a
+custom LIST command will be sent with PRET CMD before PASV as well. (Added in
+7.20.0)
 .IP "CURLE_FTP_CANT_GET_HOST (15)"
 An internal failure to lookup the host used for the new connection.
 .IP "CURLE_FTP_COULDNT_SET_TYPE (17)"
@@ -87,15 +92,13 @@ returned an error code that was 400 or higher (for FTP) or otherwise
 indicated unsuccessful completion of the command.
 .IP "CURLE_HTTP_RETURNED_ERROR (22)"
 This is returned if CURLOPT_FAILONERROR is set TRUE and the HTTP server
-returns an error code that is >= 400. (This error code was formerly known as
-CURLE_HTTP_NOT_FOUND.)
+returns an error code that is >= 400.
 .IP "CURLE_WRITE_ERROR (23)"
 An error occurred when writing received data to a local file, or an error was
 returned to libcurl from a write callback.
 .IP "CURLE_UPLOAD_FAILED (25)"
 Failed starting the upload. For FTP, the server typically denied the STOR
 command. The error buffer usually contains the server's explanation for this.
-(This error code was formerly known as CURLE_FTP_COULDNT_STOR_FILE.)
 .IP "CURLE_READ_ERROR (26)"
 There was a problem reading a local file or an error returned by the read
 callback.
@@ -120,8 +123,9 @@ A problem occurred somewhere in the SSL/TLS handshake. You really want the
 error buffer and read the message there as it pinpoints the problem slightly
 more. Could be certificates (file formats, paths, permissions), passwords, and
 others.
-.IP "CURLE_FTP_BAD_DOWNLOAD_RESUME (36)"
-Attempting FTP resume beyond file size.
+.IP "CURLE_BAD_DOWNLOAD_RESUME (36)"
+The download could not be resumed because the specified offset was out of the
+file boundary.
 .IP "CURLE_FILE_COULDNT_READ_FILE (37)"
 A file given with FILE:// couldn't be opened. Most likely because the file
 path doesn't identify an existing file. Did you check file permissions?
@@ -138,8 +142,7 @@ Internal error. A function was called with a bad parameter.
 .IP "CURLE_INTERFACE_FAILED (45)"
 Interface error. A specified outgoing interface could not be used. Set which
 interface to use for outgoing connections' source IP address with
-CURLOPT_INTERFACE. (This error code was formerly known as
-CURLE_HTTP_PORT_FAILED.)
+CURLOPT_INTERFACE.
 .IP "CURLE_TOO_MANY_REDIRECTS (47)"
 Too many redirects. When following redirects, libcurl hit the maximum amount.
 Set your limit with CURLOPT_MAXREDIRS.

docs/libcurl/libcurl-multi.3

@@ -134,6 +134,7 @@ the future, you should be aware of the following current restrictions:
 .nf
  - Name resolves on non-windows unless c-ares is used
  - GnuTLS SSL connections
+ - NSS SSL connections
  - Active FTP connections
  - HTTP proxy CONNECT operations
  - SOCKS proxy handshakes

docs/libcurl/libcurl.m4

@@ -55,6 +55,10 @@ AC_DEFUN([LIBCURL_CHECK_CONFIG],
   AH_TEMPLATE([LIBCURL_PROTOCOL_LDAP],[Defined if libcurl supports LDAP])
   AH_TEMPLATE([LIBCURL_PROTOCOL_DICT],[Defined if libcurl supports DICT])
   AH_TEMPLATE([LIBCURL_PROTOCOL_TFTP],[Defined if libcurl supports TFTP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_RTSP],[Defined if libcurl supports RTSP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_POP3],[Defined if libcurl supports POP3])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_IMAP],[Defined if libcurl supports IMAP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_SMTP],[Defined if libcurl supports SMTP])
 
   AC_ARG_WITH(libcurl,
      AC_HELP_STRING([--with-libcurl=DIR],[look for the curl library in DIR]),
@@ -194,17 +198,23 @@ x=CURLOPT_VERBOSE;
 
 	      # We don't have --protocols, so just assume that all
 	      # protocols are available
-	      _libcurl_protocols="HTTP FTP FILE TELNET LDAP DICT"
+	      _libcurl_protocols="HTTP FTP FILE TELNET LDAP DICT TFTP
 
 	      if test x$libcurl_feature_SSL = xyes ; then
 	         _libcurl_protocols="$_libcurl_protocols HTTPS"
 
 		 # FTPS wasn't standards-compliant until version
-		 # 7.11.0
+		 # 7.11.0 (0x070b00 == 461568)
 		 if test $_libcurl_version -ge 461568; then
 		    _libcurl_protocols="$_libcurl_protocols FTPS"
 		 fi
 	      fi
+
+	      # RTSP, IMAP, POP3 and SMTP were added in
+              # 7.20.0 (0x071400 == 463872)
+	      if test $_libcurl_version -ge 463872; then
+		  _libcurl_protocols="$_libcurl_protocols RTSP IMAP POP3 SMTP"
+	      fi
 	   fi
 
 	   for _libcurl_protocol in $_libcurl_protocols ; do

docs/libcurl/symbols-in-versions

@@ -37,7 +37,7 @@ CURLE_FAILED_INIT               7.1
 CURLE_FILESIZE_EXCEEDED         7.10.8
 CURLE_FILE_COULDNT_READ_FILE    7.1
 CURLE_FTP_ACCESS_DENIED         7.1
-CURLE_FTP_BAD_DOWNLOAD_RESUME   7.1
+CURLE_FTP_BAD_DOWNLOAD_RESUME   7.1           7.1
 CURLE_FTP_CANT_GET_HOST         7.1
 CURLE_FTP_CANT_RECONNECT        7.1           7.17.0
 CURLE_FTP_COULDNT_GET_SIZE      7.1           7.17.0
@@ -47,7 +47,9 @@ CURLE_FTP_COULDNT_SET_BINARY    7.1           7.17.0
 CURLE_FTP_COULDNT_SET_TYPE      7.17.0
 CURLE_FTP_COULDNT_STOR_FILE     7.1
 CURLE_FTP_COULDNT_USE_REST      7.1
+CURLE_FTP_PARTIAL_FILE          7.1           7.1
 CURLE_FTP_PORT_FAILED           7.1
+CURLE_FTP_PRET_FAILED           7.20.0
 CURLE_FTP_QUOTE_ERROR           7.1           7.17.0
 CURLE_FTP_SSL_FAILED            -             7.17.0
 CURLE_FTP_USER_PASSWORD_INCORRECT 7.1         7.17.0
@@ -74,13 +76,15 @@ CURLE_OPERATION_TIMEDOUT        7.17.0
 CURLE_OPERATION_TIMEOUTED       7.1           7.17.0
 CURLE_OUT_OF_MEMORY             7.1
 CURLE_PARTIAL_FILE              7.1
-CURLE_PEER_FAILED_VERIFICATION  -             7.17.1
+CURLE_PEER_FAILED_VERIFICATION  7.17.1
 CURLE_QUOTE_ERROR               7.17.0
 CURLE_RANGE_ERROR               7.17.0
 CURLE_READ_ERROR                7.1
 CURLE_RECV_ERROR                7.13.0
 CURLE_REMOTE_ACCESS_DENIED      7.17.0
 CURLE_REMOTE_DISK_FULL          7.17.0
+CURLE_RTSP_CSEQ_ERROR           7.20.0
+CURLE_RTSP_SESSION_ERROR        7.20.0
 CURLE_SEND_ERROR                7.13.0
 CURLE_SHARE_IN_USE              -             7.17.0
 CURLE_SSH                       7.16.1
@@ -93,7 +97,7 @@ CURLE_SSL_ENGINE_INITFAILED     7.13.0
 CURLE_SSL_ENGINE_NOTFOUND       7.9.3
 CURLE_SSL_ENGINE_SETFAILED      7.9.3
 CURLE_SSL_ISSUER_ERROR          7.19.0
-CURLE_SSL_PEER_CERTIFICATE      7.17.1
+CURLE_SSL_PEER_CERTIFICATE      -             7.17.1
 CURLE_SSL_SHUTDOWN_FAILED       7.16.1
 CURLE_TELNET_OPTION_SYNTAX      7.7
 CURLE_TFTP_DISKFULL             7.15.0        7.17.0
@@ -231,7 +235,17 @@ CURLOPT_FTP_SSL                 7.11.0        7.16.4
 CURLOPT_FTP_SSL_CCC             7.16.1
 CURLOPT_FTP_USE_EPRT            7.10.5
 CURLOPT_FTP_USE_EPSV            7.9.2
+CURLOPT_FTP_USE_PRET            7.20.0
+CURLOPT_RTSP_REQUEST            7.20.0
+CURLOPT_RTSP_SESSION_ID         7.20.0
+CURLOPT_RTSP_STREAM_URI         7.20.0
+CURLOPT_RTSP_TRANSPORT          7.20.0
+CURLOPT_RTSP_CLIENT_CSEQ        7.20.0
+CURLOPT_RTSP_SERVER_CSEQ        7.20.0
+CURLOPT_INTERLEAVEDATA          7.20.0
+CURLOPT_INTERLEAVEFUNCTION      7.20.0
 CURLOPT_HEADER                  7.1
+CURLOPT_HEADERDATA              7.10
 CURLOPT_HEADERFUNCTION          7.7.2
 CURLOPT_HTTP200ALIASES          7.10.3
 CURLOPT_HTTPAUTH                7.10.6
@@ -259,6 +273,8 @@ CURLOPT_LOCALPORT               7.15.2
 CURLOPT_LOCALPORTRANGE          7.15.2
 CURLOPT_LOW_SPEED_LIMIT         7.1
 CURLOPT_LOW_SPEED_TIME          7.1
+CURLOPT_MAIL_FROM               7.20.0
+CURLOPT_MAIL_RCPT               7.20.0
 CURLOPT_MAXCONNECTS             7.7
 CURLOPT_MAXFILESIZE             7.10.8
 CURLOPT_MAXFILESIZE_LARGE       7.11.0
@@ -374,10 +390,17 @@ CURLPROTO_FTP                   7.19.4
 CURLPROTO_FTPS                  7.19.4
 CURLPROTO_HTTP                  7.19.4
 CURLPROTO_HTTPS                 7.19.4
+CURLPROTO_IMAP                  7.20.0
+CURLPROTO_IMAPS                 7.20.0
 CURLPROTO_LDAP                  7.19.4
 CURLPROTO_LDAPS                 7.19.4
+CURLPROTO_POP3                  7.20.0
+CURLPROTO_POP3S                 7.20.0
+CURLPROTO_RTSP                  7.20.0
 CURLPROTO_SCP                   7.19.4
 CURLPROTO_SFTP                  7.19.4
+CURLPROTO_SMTP                  7.20.0
+CURLPROTO_SMTPS                 7.20.0
 CURLPROTO_TELNET                7.19.4
 CURLPROTO_TFTP                  7.19.4
 CURLPROXY_HTTP                  7.10

include/curl/curl.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -31,16 +31,8 @@
  *   http://cool.haxx.se/mailman/listinfo/curl-library/
  */
 
-/*
- * Leading 'curl' path on the 'curlbuild.h' include statement is
- * required to properly allow building outside of the source tree,
- * due to the fact that in this case 'curlbuild.h' is generated in
- * a subdirectory of the build tree while 'curl.h actually remains
- * in a subdirectory of the source tree.
- */
-
 #include "curlver.h"         /* libcurl version defines   */
-#include "curl/curlbuild.h"  /* libcurl build definitions */
+#include "curlbuild.h"       /* libcurl build definitions */
 #include "curlrules.h"       /* libcurl rules enforcement */
 
 /*
@@ -55,6 +47,11 @@
 #include <stdio.h>
 #include <limits.h>
 
+#if defined(__FreeBSD__) && (__FreeBSD__ >= 2)
+/* Needed for __FreeBSD_version symbol definition */
+#include <osreldate.h>
+#endif
+
 /* The include stuff here below is mainly for time_t! */
 #include <sys/types.h>
 #include <time.h>
@@ -74,7 +71,8 @@
    require it! */
 #if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \
     defined(__minix) || defined(__SYMBIAN32__) || defined(__INTEGRITY) || \
-    defined(ANDROID)
+    defined(ANDROID) || \
+   (defined(__FreeBSD_version) && (__FreeBSD_version < 800000))
 #include <sys/select.h>
 #endif
 
@@ -244,14 +242,6 @@ typedef curl_socket_t
                             curlsocktype purpose,
                             struct curl_sockaddr *address);
 
-#ifndef CURL_NO_OLDIES
-  /* not used since 7.10.8, will be removed in a future release */
-typedef int (*curl_passwd_callback)(void *clientp,
-                                    const char *prompt,
-                                    char *buffer,
-                                    int buflen);
-#endif
-
 typedef enum {
   CURLIOE_OK,            /* I/O operation successful */
   CURLIOE_UNKNOWNCMD,    /* command was unknown to callback */
@@ -415,6 +405,10 @@ typedef enum {
                                     wrong format (Added in 7.19.0) */
   CURLE_SSL_ISSUER_ERROR,        /* 83 - Issuer check failed.  (Added in
                                     7.19.0) */
+  CURLE_FTP_PRET_FAILED,         /* 84 - a PRET command failed */
+  CURLE_RTSP_CSEQ_ERROR,         /* 85 - mismatch of RTSP CSeq numbers */
+  CURLE_RTSP_SESSION_ERROR,      /* 86 - mismatch of RTSP Session Identifiers */
+
   CURL_LAST /* never use! */
 } CURLcode;
 
@@ -621,6 +615,13 @@ typedef enum {
 #define CURLPROTO_DICT   (1<<9)
 #define CURLPROTO_FILE   (1<<10)
 #define CURLPROTO_TFTP   (1<<11)
+#define CURLPROTO_IMAP   (1<<12)
+#define CURLPROTO_IMAPS  (1<<13)
+#define CURLPROTO_POP3   (1<<14)
+#define CURLPROTO_POP3S  (1<<15)
+#define CURLPROTO_SMTP   (1<<16)
+#define CURLPROTO_SMTPS  (1<<17)
+#define CURLPROTO_RTSP   (1<<18)
 #define CURLPROTO_ALL    (~0) /* enable everything */
 
 /* long may be 32 or 64 bits, but we should never depend on anything else
@@ -1036,6 +1037,7 @@ typedef enum {
      essentially places a demand on the FTP server to acknowledge commands
      in a timely manner. */
   CINIT(FTP_RESPONSE_TIMEOUT, LONG, 112),
+#define CURLOPT_SERVER_RESPONSE_TIMEOUT CURLOPT_FTP_RESPONSE_TIMEOUT
 
   /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to
      tell libcurl to resolve names to those IP versions only. This only has
@@ -1280,6 +1282,39 @@ typedef enum {
   /* set the SSH host key callback custom pointer */
   CINIT(SSH_KEYDATA, OBJECTPOINT, 185),
 
+  /* set the SMTP mail originator */
+  CINIT(MAIL_FROM, OBJECTPOINT, 186),
+
+  /* set the SMTP mail receiver(s) */
+  CINIT(MAIL_RCPT, OBJECTPOINT, 187),
+
+  /* FTP: send PRET before PASV */
+  CINIT(FTP_USE_PRET, LONG, 188),
+
+  /* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */
+  CINIT(RTSP_REQUEST, LONG, 189),
+
+  /* The RTSP session identifier */
+  CINIT(RTSP_SESSION_ID, OBJECTPOINT, 190),
+
+  /* The RTSP stream URI */
+  CINIT(RTSP_STREAM_URI, OBJECTPOINT, 191),
+
+  /* The Transport: header to use in RTSP requests */
+  CINIT(RTSP_TRANSPORT, OBJECTPOINT, 192),
+
+  /* Manually initialize the client RTSP CSeq for this handle */
+  CINIT(RTSP_CLIENT_CSEQ, LONG, 193),
+
+  /* Manually initialize the server RTSP CSeq for this handle */
+  CINIT(RTSP_SERVER_CSEQ, LONG, 194),
+
+  /* The stream to pass to INTERLEAVEFUNCTION. */
+  CINIT(INTERLEAVEDATA, OBJECTPOINT, 195),
+
+  /* Let the application define a custom write method for RTP data */
+  CINIT(INTERLEAVEFUNCTION, FUNCTIONPOINT, 196),
+
   CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
@@ -1323,6 +1358,7 @@ typedef enum {
 #define CURLOPT_WRITEDATA CURLOPT_FILE
 #define CURLOPT_READDATA  CURLOPT_INFILE
 #define CURLOPT_HEADERDATA CURLOPT_WRITEHEADER
+#define CURLOPT_RTSPHEADER CURLOPT_HTTPHEADER
 
   /* These enums are for use with the CURLOPT_HTTP_VERSION option. */
 enum {
@@ -1335,6 +1371,25 @@ enum {
   CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */
 };
 
+/*
+ * Public API enums for RTSP requests
+ */
+enum {
+    CURL_RTSPREQ_NONE, /* first in list */
+    CURL_RTSPREQ_OPTIONS,
+    CURL_RTSPREQ_DESCRIBE,
+    CURL_RTSPREQ_ANNOUNCE,
+    CURL_RTSPREQ_SETUP,
+    CURL_RTSPREQ_PLAY,
+    CURL_RTSPREQ_PAUSE,
+    CURL_RTSPREQ_TEARDOWN,
+    CURL_RTSPREQ_GET_PARAMETER,
+    CURL_RTSPREQ_SET_PARAMETER,
+    CURL_RTSPREQ_RECORD,
+    CURL_RTSPREQ_RECEIVE,
+    CURL_RTSPREQ_LAST /* last in list */
+};
+
   /* These enums are for use with the CURLOPT_NETRC option. */
 enum CURL_NETRC_OPTION {
   CURL_NETRC_IGNORED,     /* The .netrc will never be read.
@@ -1704,9 +1759,13 @@ typedef enum {
   CURLINFO_APPCONNECT_TIME  = CURLINFO_DOUBLE + 33,
   CURLINFO_CERTINFO         = CURLINFO_SLIST  + 34,
   CURLINFO_CONDITION_UNMET  = CURLINFO_LONG   + 35,
+  CURLINFO_RTSP_SESSION_ID  = CURLINFO_STRING + 36,
+  CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG   + 37,
+  CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG   + 38,
+  CURLINFO_RTSP_CSEQ_RECV   = CURLINFO_LONG   + 39,
   /* Fill in new entries below here! */
 
-  CURLINFO_LASTONE          = 35
+  CURLINFO_LASTONE          = 39
 } CURLINFO;
 
 /* CURLINFO_RESPONSE_CODE is the new name for the option previously known as

include/curl/curlbuild.h.dist

@@ -370,16 +370,7 @@
 #  define CURL_SIZEOF_CURL_SOCKLEN_T 4
 
 #elif defined(__VMS)
-#  if defined(__alpha) || defined(__ia64)
-#    define CURL_SIZEOF_LONG           4
-#    define CURL_TYPEOF_CURL_OFF_T     long long
-#    define CURL_FORMAT_CURL_OFF_T     "lld"
-#    define CURL_FORMAT_CURL_OFF_TU    "llu"
-#    define CURL_FORMAT_OFF_T          "%lld"
-#    define CURL_SIZEOF_CURL_OFF_T     8
-#    define CURL_SUFFIX_CURL_OFF_T     LL
-#    define CURL_SUFFIX_CURL_OFF_TU    ULL
-#  else
+#  if defined(__VAX)
 #    define CURL_SIZEOF_LONG           4
 #    define CURL_TYPEOF_CURL_OFF_T     long
 #    define CURL_FORMAT_CURL_OFF_T     "ld"
@@ -388,6 +379,15 @@
 #    define CURL_SIZEOF_CURL_OFF_T     4
 #    define CURL_SUFFIX_CURL_OFF_T     L
 #    define CURL_SUFFIX_CURL_OFF_TU    UL
+#  else
+#    define CURL_SIZEOF_LONG           4
+#    define CURL_TYPEOF_CURL_OFF_T     long long
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_FORMAT_OFF_T          "%lld"
+#    define CURL_SIZEOF_CURL_OFF_T     8
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
 #  endif
 #  define CURL_TYPEOF_CURL_SOCKLEN_T unsigned int
 #  define CURL_SIZEOF_CURL_SOCKLEN_T 4

include/curl/curlrules.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -246,4 +246,8 @@ typedef char
 #undef CURL_TYPEOF_CURL_SOCKLEN_T
 #undef CURL_TYPEOF_CURL_OFF_T
 
+#ifdef CURL_NO_OLDIES
+#undef CURL_FORMAT_OFF_T /* not required since 7.19.0 - obsoleted in 7.20.0 */
+#endif
+
 #endif /* __CURL_CURLRULES_H */

include/curl/curlver.h

@@ -31,13 +31,13 @@
 
 /* This is the version number of the libcurl package from which this header
    file origins: */
-#define LIBCURL_VERSION "7.19.7-CVS"
+#define LIBCURL_VERSION "7.20.0-CVS"
 
 /* The numeric version number is also available "in parts" by using these
    defines: */
 #define LIBCURL_VERSION_MAJOR 7
-#define LIBCURL_VERSION_MINOR 19
-#define LIBCURL_VERSION_PATCH 7
+#define LIBCURL_VERSION_MINOR 20
+#define LIBCURL_VERSION_PATCH 0
 
 /* This is the numeric version of the libcurl version number, meant for easier
    parsing and comparions by programs. The LIBCURL_VERSION_NUM define will
@@ -54,7 +54,7 @@
    and it is always a greater number in a more recent release. It makes
    comparisons with greater than and less than work.
 */
-#define LIBCURL_VERSION_NUM 0x071307
+#define LIBCURL_VERSION_NUM 0x071400
 
 /*
  * This is the date and time when the full source package was created. The

lib/Makefile.Watcom

@@ -39,38 +39,23 @@ C_ARG    = $(OBJ_BASE)\wcc386.arg
 LINK_ARG = $(OBJ_BASE)\dyn\wlink.arg
 LIB_ARG  = $(OBJ_BASE)\stat\wlib.arg
 
-OBJS = $(OBJ_DIR)\base64.obj           $(OBJ_DIR)\connect.obj        &
-       $(OBJ_DIR)\content_encoding.obj $(OBJ_DIR)\cookie.obj         &
-       $(OBJ_DIR)\curl_addrinfo.obj    $(OBJ_DIR)\dict.obj           &
-       $(OBJ_DIR)\easy.obj             $(OBJ_DIR)\escape.obj         &
-       $(OBJ_DIR)\file.obj             $(OBJ_DIR)\formdata.obj       &
-       $(OBJ_DIR)\ftp.obj              $(OBJ_DIR)\getenv.obj         &
-       $(OBJ_DIR)\getinfo.obj          $(OBJ_DIR)\gtls.obj           &
-       $(OBJ_DIR)\hash.obj             $(OBJ_DIR)\hostares.obj       &
-       $(OBJ_DIR)\hostasyn.obj         $(OBJ_DIR)\hostip.obj         &
-       $(OBJ_DIR)\hostip4.obj          $(OBJ_DIR)\hostip6.obj        &
-       $(OBJ_DIR)\hostsyn.obj          $(OBJ_DIR)\hostthre.obj       &
-       $(OBJ_DIR)\http.obj             $(OBJ_DIR)\http_chunks.obj    &
-       $(OBJ_DIR)\http_digest.obj      $(OBJ_DIR)\http_negotiate.obj &
-       $(OBJ_DIR)\http_ntlm.obj        $(OBJ_DIR)\if2ip.obj          &
-       $(OBJ_DIR)\inet_ntop.obj        $(OBJ_DIR)\inet_pton.obj      &
-       $(OBJ_DIR)\krb4.obj             $(OBJ_DIR)\ldap.obj           &
-       $(OBJ_DIR)\llist.obj            $(OBJ_DIR)\md5.obj            &
-       $(OBJ_DIR)\memdebug.obj         $(OBJ_DIR)\mprintf.obj        &
-       $(OBJ_DIR)\multi.obj            $(OBJ_DIR)\netrc.obj          &
-       $(OBJ_DIR)\parsedate.obj        $(OBJ_DIR)\progress.obj       &
-       $(OBJ_DIR)\security.obj         $(OBJ_DIR)\rawstr.obj         &
-       $(OBJ_DIR)\select.obj           $(OBJ_DIR)\sendf.obj          &
-       $(OBJ_DIR)\share.obj            $(OBJ_DIR)\socks.obj          &
-       $(OBJ_DIR)\speedcheck.obj       $(OBJ_DIR)\splay.obj          &
-       $(OBJ_DIR)\sslgen.obj           $(OBJ_DIR)\ssluse.obj         &
-       $(OBJ_DIR)\strequal.obj         $(OBJ_DIR)\strerror.obj       &
-       $(OBJ_DIR)\strtok.obj           $(OBJ_DIR)\strtoofft.obj      &
-       $(OBJ_DIR)\telnet.obj           $(OBJ_DIR)\tftp.obj           &
-       $(OBJ_DIR)\timeval.obj          $(OBJ_DIR)\transfer.obj       &
-       $(OBJ_DIR)\url.obj              $(OBJ_DIR)\version.obj        &
-       $(OBJ_DIR)\slist.obj            $(OBJ_DIR)\nonblock.obj       &
-       $(OBJ_DIR)\curl_rand.obj        $(OBJ_DIR)\curl_memrchr.obj
+# Unfortunately, we can't include Makefile.inc here because wmake doesn't
+# use backslash as the line continuation character by default
+CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	&
+  cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c	&
+  ldap.c ssluse.c version.c getenv.c escape.c mprintf.c telnet.c	&
+  netrc.c getinfo.c transfer.c strequal.c easy.c security.c krb4.c	&
+  krb5.c memdebug.c http_chunks.c strtok.c connect.c llist.c hash.c	&
+  multi.c content_encoding.c share.c http_digest.c md5.c curl_rand.c	&
+  http_negotiate.c http_ntlm.c inet_pton.c strtoofft.c strerror.c	&
+  hostares.c hostasyn.c hostip4.c hostip6.c hostsyn.c hostthre.c	&
+  inet_ntop.c parsedate.c select.c gtls.c sslgen.c tftp.c splay.c	&
+  strdup.c socks.c ssh.c nss.c qssl.c rawstr.c curl_addrinfo.c          &
+  socks_gssapi.c socks_sspi.c curl_sspi.c slist.c nonblock.c		&
+  curl_memrchr.c imap.c pop3.c smtp.c pingpong.c rtsp.c curl_threads.c
+
+OBJS = $(CSOURCES:.c=.obj)
+OBJS = $OBJ_DIR\$(OBJS: = $OBJ_DIR\)
 
 #
 # Use $(OBJS) as a template to generate $(OBJS_STAT) and $(OBJS_DYN).
@@ -554,3 +539,27 @@ $(OBJ_DIR)\curl_memrchr.obj: curl_memrchr.c setup.h config-win32.h &
   ..\include\curl\curlrules.h ..\include\curl\easy.h &
   ..\include\curl\multi.h ..\include\curl\curl.h curl_memrchr.h &
   ..\include\curl\mprintf.h curl_memory.h memdebug.h
+$(OBJ_DIR)\imap.obj: imap.c setup.h config-win32.h &
+  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\curlrules.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h imap.h &
+  ..\include\curl\mprintf.h curl_memory.h memdebug.h
+$(OBJ_DIR)\pop3.obj: pop3.c setup.h config-win32.h &
+  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\curlrules.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h pop3.h &
+  ..\include\curl\mprintf.h curl_memory.h memdebug.h
+$(OBJ_DIR)\smtp.obj: smtp.c setup.h config-win32.h &
+  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\curlrules.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h smtp.h &
+  ..\include\curl\mprintf.h curl_memory.h memdebug.h
+$(OBJ_DIR)\pingpong.obj: pingpong.c setup.h config-win32.h &
+  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\curlrules.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h pingpong.h &
+  ..\include\curl\mprintf.h curl_memory.h memdebug.h

lib/Makefile.am

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -27,7 +27,7 @@ VCPROJ = libcurl.vcproj
 
 DOCS = README.encoding README.memoryleak README.ares README.curlx	\
  README.hostip README.multi_socket README.httpauth README.pipelining    \
- README.curl_off_t README.cmake
+ README.curl_off_t README.cmake README.pingpong
 
 CMAKE_DIST = CMakeLists.txt curl_config.h.cmake
 
@@ -50,7 +50,8 @@ LIBCURL_LIBS = @LIBCURL_LIBS@
 # being currently built and tested are searched before the library which
 # might possibly already be installed in the system.
 #
-# $(top_builddir)/include is for libcurl's generated curl/curlbuild.h file
+# $(top_builddir)/include/curl for generated curlbuild.h included from curl.h
+# $(top_builddir)/include for generated curlbuild.h included from lib/setup.h
 # $(top_srcdir)/include is for libcurl's external include files
 # $(top_builddir)/lib is for libcurl's generated lib/curl_config.h file
 # $(top_srcdir)/lib is for libcurl's lib/setup.h and other "private" files
@@ -58,16 +59,18 @@ LIBCURL_LIBS = @LIBCURL_LIBS@
 # $(top_srcdir)/ares is for in-tree c-ares's external include files
 
 if USE_EMBEDDED_ARES
-INCLUDES = -I$(top_builddir)/include \
-           -I$(top_srcdir)/include   \
-           -I$(top_builddir)/lib     \
-           -I$(top_srcdir)/lib       \
-           -I$(top_builddir)/ares    \
+INCLUDES = -I$(top_builddir)/include/curl \
+           -I$(top_builddir)/include      \
+           -I$(top_srcdir)/include        \
+           -I$(top_builddir)/lib          \
+           -I$(top_srcdir)/lib            \
+           -I$(top_builddir)/ares         \
            -I$(top_srcdir)/ares
 else
-INCLUDES = -I$(top_builddir)/include \
-           -I$(top_srcdir)/include   \
-           -I$(top_builddir)/lib     \
+INCLUDES = -I$(top_builddir)/include/curl \
+           -I$(top_builddir)/include      \
+           -I$(top_srcdir)/include        \
+           -I$(top_builddir)/lib          \
            -I$(top_srcdir)/lib
 endif
 
@@ -81,9 +84,9 @@ if SONAME_BUMP
 #
 # This conditional soname bump SHOULD be removed at next "proper" bump.
 #
-VERSIONINFO=-version-info 6:1:1
+VERSIONINFO=-version-info 7:0:2
 else
-VERSIONINFO=-version-info 5:1:1
+VERSIONINFO=-version-info 6:0:2
 endif
 
 # This flag accepts an argument of the form current[:revision[:age]]. So,

lib/Makefile.inc

@@ -11,7 +11,7 @@ CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	\
   inet_ntop.c parsedate.c select.c gtls.c sslgen.c tftp.c splay.c	\
   strdup.c socks.c ssh.c nss.c qssl.c rawstr.c curl_addrinfo.c          \
   socks_gssapi.c socks_sspi.c curl_sspi.c slist.c nonblock.c		\
-  curl_memrchr.c
+  curl_memrchr.c imap.c pop3.c smtp.c pingpong.c rtsp.c curl_threads.c
 
 HHEADERS = arpa_telnet.h netrc.h file.h timeval.h qssl.h hostip.h	\
   progress.h formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h	\
@@ -23,5 +23,4 @@ HHEADERS = arpa_telnet.h netrc.h file.h timeval.h qssl.h hostip.h	\
   transfer.h select.h easyif.h multiif.h parsedate.h sslgen.h gtls.h	\
   tftp.h sockaddr.h splay.h strdup.h setup_once.h socks.h ssh.h nssg.h	\
   curl_base64.h rawstr.h curl_addrinfo.h curl_sspi.h slist.h nonblock.h	\
-  curl_memrchr.h
-
+  curl_memrchr.h imap.h pop3.h smtp.h pingpong.h rtsp.h curl_threads.h

lib/Makefile.riscos

@@ -14,7 +14,8 @@ objs =	o.base64 o.connect o.cookie o.dict \
 	o.strequal o.strtok o.telnet o.timeval \
 	o.transfer o.url o.version o.strtoofft o.sslgen o.gtls \
 	o.rawstr o.curl_addrinfo o.slist o.nonblock o.curl_rand \
-	o.curl_memrchr
+	o.curl_memrchr o.imap o.pop3 o.smtp o.pingpong o.rtsp \
+	o.curl_threads
 
 
 # Compile options:
@@ -44,6 +45,9 @@ o.curl_memrchr:	c.curl_memrchr
 o.curl_rand:	c.curl_rand
 		gcc $(compileropts) -c -o curl_rand.o c.curl_rand
 
+o.curl_threads:	c.curl_threads
+		gcc $(compileropts) -c -o curl_threads.o c.curl_threads
+
 o.dict:	c.dict
 		gcc $(compileropts) -c -o dict.o c.dict
 
@@ -92,6 +96,9 @@ o.http_chunks:	c.http_chunks
 o.if2ip:	c.if2ip
 		gcc $(compileropts) -c -o if2ip.o c.if2ip
 
+o.imap:		c.imap
+		gcc $(compileropts) -c -o imap.o c.imap
+
 o.inet_ntop:	c.inet_ntop
 		gcc $(compileropts) -c -o inet_ntop.o c.inet_ntop
 
@@ -116,9 +123,18 @@ o.netrc:	c.netrc
 o.parsedate:	c.parsedate
 		gcc $(compileropts) -c -o parsedate.o c.parsedate
 
+o.pingpong:	c.pingpong
+		gcc $(compileropts) -c -o pingpong.o c.pingpong
+
+o.pop3:		c.pop3
+		gcc $(compileropts) -c -o pop3.o c.pop3
+
 o.progress:	c.progress
 		gcc $(compileropts) -c -o progress.o c.progress
 
+o.rtsp:		c.rtsp
+		gcc $(compileropts) -c -o rtsp.o c.rtsp
+
 o.security:	c.security
 		gcc $(compileropts) -c -o security.o c.security
 
@@ -131,6 +147,9 @@ o.sendf:	c.sendf
 o.slist:	c.slist
 		gcc $(compileropts) -c -o slist.o c.slist
 
+o.smtp:		c.smtp
+		gcc $(compileropts) -c -o smtp.o c.smtp
+
 o.speedcheck:	c.speedcheck
 		gcc $(compileropts) -c -o speedcheck.o c.speedcheck