7.19.1 coming up

problem with my CURLINFO_PRIMARY_IP fix from October 7th that caused a NULL
  pointer read. I also took the opportunity to clean up this logic (storing of
  the connection's IP address) somewhat as we had it stored in two different
  places and ways previously and they are now unified.

CHANGES

@@ -6,6 +6,378 @@
 
                                   Changelog
 
+Version 7.19.1 (5 November 2008)
+
+Daniel Stenberg (4 Nov 2008)
+- CURLINFO_FILETIME now works for file:// transfers as well
+
+Daniel Stenberg (3 Nov 2008)
+- Bug #2218480 (http://curl.haxx.se/bug/view.cgi?id=2218480) pointed out a
+  problem with my CURLINFO_PRIMARY_IP fix from October 7th that caused a NULL
+  pointer read. I also took the opportunity to clean up this logic (storing of
+  the connection's IP address) somewhat as we had it stored in two different
+  places and ways previously and they are now unified.
+
+Yang Tse (3 Nov 2008)
+- Fix undersized IPv6 address internal buffer. IPv6 address strings longer
+  than 35 characters would be truncated.
+
+Daniel Stenberg (2 Nov 2008)
+- Daniel Johnson reported and fixed:
+
+  When c-ares isn't enabled, libcurl by default calls getaddrinfo with family
+  set to PF_UNSPEC which causes getaddrinfo to return all available addresses,
+  both IPv4 and IPv6. Libcurl then tries each one until it can connect. If the
+  net connection doesn't support IPv6, libcurl can still fall back to IPv4.
+
+  However, since c-ares doesn't support PF_UNSPEC, when it's used it defaults
+  to using family=PF_INET6 and therefore only returns IPv6 addresses when AAAA
+  records are available, even if IPv4 addresses are also available. The effect
+  is that since my ISP doesn't do IPv6, libcurl can't connect at all to a site
+  that has AAAA records. It will work if I explicitly use CURL_IPRESOLVE_V4 or
+  --ipv4 with the curl tool. I discovered this when curl would fail to connect
+  to seemingly random sites. It turns out they weren't random, they were sites
+  with AAAA records.
+
+  So now libcurl defaults to PF_INET... until c-ares has been tought to offer
+  both.
+
+Yang Tse (31 Oct 2008)
+- Tests 558 and 559 are stabilized. These two tests were initially introduced
+  to aid in the location of a seg-fault which was only triggered on non-debug
+  builds done with the icc 9.1 Intel compiler. Test 558 does not trigger the
+  problem, but test 559 does trigger it. As of today, it isn't yet absolutely
+  clear if it is a compiler optimizer issue or a memory corruption one.
+
+Yang Tse (30 Oct 2008)
+- Use our Curl_addrinfo structure definition to handle address info data even
+  when a system addrinfo struct is available. Provide and use a wrapper around
+  systems getaddrinfo function, Curl_getaddrinfo_ex which returns a pointer to
+  a list of dynamically allocated Curl_addrinfo structs.
+
+  Configure will check freeaddrinfo and getaddrinfo functions and define
+  preprocessor symbols HAVE_FREEADDRINFO and HAVE_GETADDRINFO when appropriate.
+
+Daniel Fandrich (29 Oct 2008)
+- Fixed a bug that caused a few bytes of garbage to be sent after a
+  curl_easy_pause() during a chunky upload. Reported by Steve Roskowski.
+
+Daniel Fandrich (28 Oct 2008)
+- Changed the "resolve" test precheck program to verify that an IPv6 socket
+  can be created before resolving the IPv6 name.  In the context of running
+  a test, it doesn't make sense to run an IPv6 test when a host is resolvable
+  but IPv6 isn't usable.  This should fix failures of test 1085 on hosts with
+  library and DNS support for IPv6 but where actual use of IPv6 has been
+  administratively disabled.
+
+Daniel Fandrich (24 Oct 2008)
+- Added experimental support for zlib and OpenSSL on Symbian OS.
+
+Daniel Fandrich (21 Oct 2008)
+- Fixed some problems with SFTP range support to fix test cases 634 through
+  637.
+
+Daniel Fandrich (17 Oct 2008)
+- Fixed a compile error reported by Albert Chin on AIX and IRIX when using
+  GTLS.
+
+Daniel Stenberg (16 Oct 2008)
+- Igor Novoseltsev added CURLOPT_PROXYUSER and CURLOPT_PROXYPASSWORD that then
+  make CURLOPT_PROXYUSERPWD sort of deprecated. The primary motive for adding
+  these new options is that they have no problems with the colon separator
+  that the CURLOPT_PROXYUSERPWD option does.
+
+Daniel Stenberg (15 Oct 2008)
+- Pascal Terjan filed bug #2154627
+  (http://curl.haxx.se/bug/view.cgi?id=2154627) which pointed out that libcurl
+  uses strcasecmp() in multiple places where it causes failures when the
+  Turkish locale is used. This is because 'i' and 'I' isn't the same letter so
+  strcasecmp() on those letters are different in Turkish than in English (or
+  just about all other languages). I thus introduced a totally new internal
+  function in libcurl (called Curl_raw_equal) for doing case insentive
+  comparisons for english-(ascii?) style strings that thus will make "file"
+  and "FILE" match even if the Turkish locale is selected.
+
+Daniel Fandrich (15 Oct 2008)
+- A <precheck> command is considered to have failed if it returns a non-zero
+  return code.  This way, if the precheck command can't be run at all for
+  whatever reason, it's treated as a precheck failure which causes the
+  test to be skipped.
+
+Daniel Stenberg (15 Oct 2008)
+- John Wilkinson filed bug #2155496
+  (http://curl.haxx.se/bug/view.cgi?id=2155496) pointing out an error case
+  without a proper human-readable error message. When a read callback returns
+  a too large value (like when trying to return a negative number) it would
+  trigger and the generic error message then makes the proplem slightly
+  different to track down. I've added an error message for this now.
+
+Daniel Fandrich (9 Oct 2008)
+- Fixed the --interface option to work with IPv6 connections on glibc
+  systems supporting getifaddrs(). Also fixed a problem where an IPv6
+  address could be chosen instead of an IPv4 one for --interface when it
+  involved a name lookup.
+
+Daniel Fandrich (8 Oct 2008)
+- Added tests 1082 through 1085 to test symbolic --interface parameters
+
+- Added tests 633 through 637 to test the new file range support for SFTP.
+  All but the first test cause an infinite loop or other failure and so
+  are added to DISABLED.
+
+Daniel Stenberg (8 Oct 2008)
+- John Wilkinson filed bug #2152270
+  (http://curl.haxx.se/bug/view.cgi?id=2152270) which identified and fixed a
+  CURLINFO_REDIRECT_URL memory leak and an additional wrong-doing:
+
+  Any subsequent transfer with a redirect leaks memory, eventually crashing
+  the process potentially.
+
+  Any subsequent transfer WITHOUT a redirect causes the most recent redirect
+  that DID occur on some previous transfer to still be reported.
+
+- Igor Novoseltsev filed bug #2111613
+  (http://curl.haxx.se/bug/view.cgi?id=2111613) that eventually identified a
+  flaw in how the multi_socket interface in some cases missed to call the
+  timeout callback when easy interfaces are removed and added within the same
+  millisecond.
+
+- Igor Novoseltsev brought a patch that introduced two new options to
+  curl_easy_setopt: CURLOPT_USERNAME and CURLOPT_PASSWORD that sort of
+  deprecates the good old CURLOPT_USERPWD since they allow applications to set
+  the user name and password independently and perhaps more importantly allow
+  both to contain colon(s) which CURLOPT_USERPWD doesn't fully support.
+
+Daniel Fandrich (7 Oct 2008)
+- Changed the handling of read/write errors in Curl_perform() to allow a
+  a fresh connection to be made in such cases and the request retransmitted.
+  This should fix test case 160.  Added test case 1079 in an attempt to
+  test a similar connection dropping scenario, but as a race condition, it's
+  hard to test reliably.
+
+- Created test cases 1080 and 1081 to reproduce a problem of
+  CURLINFO_REDIRECT_URL leaking memory and returning incorrect results when
+  two URLs are requested. Reported by vmpdemo in bug #2152270
+
+Daniel Stenberg (7 Oct 2008)
+- Fixed CURLINFO_PRIMARY_IP: When libcurl created a connection to host A then
+  the app re-used the handle to do a connection to host B and then again
+  re-used the handle to host A, it would not update the info with host A's IP
+  address (due to the connection being re-used) but it would instead report
+  the info from host B.
+
+Yang Tse (7 Oct 2008)
+- Added --enable-optimize configure option to enable and disable compiler
+  optimizations to allow decoupled setting from --enable-debug.
+
+Yang Tse (2 Oct 2008)
+- Added --enable-warnings configure option to enable and disable strict
+  compiler warnings to allow decoupled setting from --enable-debug.
+
+  runtests.pl will now run with picky compiler warnings enabled unless
+  explicitly disabled.
+  
+Daniel Fandrich (1 Oct 2008)
+- "make clean" now cleans out the docs and tests directories, too.
+
+Daniel Stenberg (30 Sep 2008)
+- The libcurl FTP code now returns CURLE_REMOTE_FILE_NOT_FOUND error when SIZE
+  gets a 550 response back for the cases where a download (or NOBODY) is
+  wanted. It still allows a 550 as response if the SIZE is used as part of an
+  upload process (like if resuming an upload is requested and the file isn't
+  there before the upload). I also modified the FTP test server and a few test
+  cases accordingly to match this modified behavior.
+
+Daniel Stenberg (29 Sep 2008)
+- Daniel Egger provided a patch that allows you to disable proxy support in
+  libcurl to somewhat reduce the size of the binary. Run configure
+  --disable-proxy.
+  
+Daniel Fandrich (29 Sep 2008)
+- Moved all signal-based name resolution timeout handling into a single new
+  Curl_resolv_timeout function to reduce coupling.
+
+Daniel Stenberg (29 Sep 2008)
+- Ian Lynagh provided a patch that now makes CURLOPT_RANGE work fine for SFTP
+  downloads!
+
+- Maxim Ivanov filed bug report #2107803
+  (http://curl.haxx.se/bug/view.cgi?id=2107803) "no CURLINFO_REDIRECT_URL in
+  multi mode" together with a patch that fixed the problem.
+  
+Daniel Stenberg (25 Sep 2008)
+- Emanuele Bovisio submitted bug report #2126435. We fixed the HTTP Digest
+  auth code to not behave badly when getting a blank realm with
+  realm="". http://curl.haxx.se/bug/view.cgi?id=2126435
+
+Daniel Fandrich (23 Sep 2008)
+- Make sure not to dereference the wrong UrlState proto union member when
+  switching from one protocol to another in a single request (e.g.
+  redirecting from HTTP to FTP as in test 1055) by resetting
+  state.expect100header before every request.
+
+Daniel Stenberg (23 Sep 2008)
+- Introducing Jamie Lokier's function for date to epoch conversion used in the
+  date parser function. This makes our function less dependent on system-
+  provided functions and instead we do all the magic ourselves. We also no
+  longer depend on the TZ environment variable. Switching to our own converter
+  has some side-effect and they are noted here for future reference (taken
+  from a mail by mr Lokier):
+
+  time_t is not measured in seconds in the ANSI C standard - or even counted
+  uniformly - weird platforms can use other numeric representations of dates
+  in time_t - hence the difftime() function.
+
+  On POSIX time_t is measured in UTC seconds, which means not including leap
+  seconds.  But it's mentioned in a few places that some old POSIX-ish
+  environments include leap seconds in their time_t counts...
+
+  I'm pretty sure [the new implementation is] correct on anything truly POSIX.
+  And it's obviously a lot less dependent on platform quirks and corner cases
+  in many ways than the mktime() version.
+
+- Rob Crittenden brought a patch to "add some locking for thread-safety to NSS
+  implementation".
+
+Daniel Stenberg (22 Sep 2008)
+- Made the SOCKS code use the new Curl_read_plain() function to fix the bug
+  Markus Moeller reported: http://curl.haxx.se/mail/archive-2008-09/0016.html
+
+- recv() errors other than those equal to EAGAIN now cause proper
+  CURLE_RECV_ERROR to get returned. This made test case 160 fail so I've now
+  disabled it until we can figure out another way to exercise that logic.
+
+- Michael Goffioul filed bug report #2107377 "Problem with multi + GnuTLS +
+  proxy" (http://curl.haxx.se/bug/view.cgi?id=2107377) that showed how a multi
+  interface using program didn't work when built with GnuTLS and a CONNECT
+  request was done over a proxy (basically test 502 over a proxy to a HTTPS
+  site). It turned out the ssl connect function would get called twice which
+  caused the second call to fail.
+
+Daniel Fandrich (22 Sep 2008)
+- Fixed test 539 to handle an out of memory condition that shows up now
+  that memdebug.h is included in the test programs.
+
+Yang Tse (20 Sep 2008)
+- Fix regression in configure script which affected OpenSSL builds on MSYS.
+
+Yang Tse (19 Sep 2008)
+- configure script now checks availability of the alarm() function.
+
+Daniel Fandrich (18 Sep 2008)
+- Don't bother to install a SIGALRM handler unless alarm() is available.
+  Also, leave the existing SIGALRM handler alone if the timeout is too small
+  to handle.
+
+Daniel Fandrich (17 Sep 2008)
+- Removed reference to curl-ca-bundle.crt in the host verification failure
+  error message.
+
+Yang Tse (17 Sep 2008)
+- Improve configure detection of gethostname(), localtime_r(), strstr(),
+  getservbyport_r(), gethostbyaddr_r() and gethostbyname_r().
+
+Yang Tse (14 Sep 2008)
+- Improve configure detection of strcasecmp(), strcasestr(), strcmpi(),
+  stricmp(), strlcat(), strncasecmp(), strncmpi() and strnicmp().
+
+Yang Tse (13 Sep 2008)
+- Disable tracking of fdopen() calls in the low-level memory leak tracking
+  code when fdopen() is not available, to avoid compiler error.
+
+Yang Tse (12 Sep 2008)
+- Further adjust detection of strerror_r() in the configure process, and
+  ensure that errno is not modified inside Curl_strerror().
+
+Yang Tse (10 Sep 2008)
+- Improve detection of gmtime_r(), strtoll(), sigaction(), strtok_r(),
+  strdup() and ftruncate() in the configure process.
+
+Daniel Fandrich (9 Sep 2008)
+- Mike Revi discovered some swapped speed switches documented in the curl man
+  page.
+
+- Checked in some documentation and code improvements and fixes that I
+  discovered in the FreeBSD ports system.
+
+Daniel Stenberg (8 Sep 2008)
+- Dmitry Kurochkin patched a problem: I have found bug in pipelining through
+  proxy. I have a transparent proxy. When running with http_proxy environment
+  variable not set my test completes fine (it goes through transparent
+  proxy). When I set http_proxy variable my test hangs after the first
+  downloaded is complete. Looks like the second handle never gets out from
+  WAITDO state.
+
+  The fix: It makes checkPendPipeline move 1 handler from pend pipe to send
+  pipe if pipelining is not supported by server but there are no handles in
+  send and recv pipes.
+
+- Stefan Krause pointed out that libcurl would wrongly send away cookies to
+  sites in cases where the cookie clearly has a very old expiry date. The
+  condition was simply that libcurl's date parser would fail to convert the
+  date and it would then count as a (timed-based) match. Starting now, a
+  missed date due to an unsupported date format or date range will now cause
+  the cookie to not match.
+
+Daniel Fandrich (5 Sep 2008)
+- Improved the logic that decides whether to use HTTP 1.1 features or not in a
+  request.  Setting a specific version with CURLOPT_HTTP_VERSION overrides
+  all other checks, but otherwise, a 1.0 request will be made if the server
+  is known to support only 1.0 because it previously responded so and the
+  connection was kept alive, or a response to a previous request on this handle
+  came back as 1.0. The latter could take place in cases like redirection or
+  authentication where several requests have to be made before the operation
+  is complete.  If any one of the servers in a redirection chain supports only
+  1.0, then remaining requests will be sent in 1.0 mode.
+
+- Detect cases where an upload must be sent chunked and the server supports
+  only HTTP 1.0 and return CURLE_UPLOAD_FAILED.
+
+Daniel Stenberg (5 Sep 2008)
+- Martin Drasar provided the CURLOPT_POSTREDIR patch. It renames
+  CURLOPT_POST301 (but adds a define for backwards compatibility for you who
+  don't define CURL_NO_OLDIES). This option allows you to now also change the
+  libcurl behavior for a HTTP response 302 after a POST to not use GET in the
+  subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the
+  patch somewhat before commit. The curl tool got a matching --post302
+  option. Test case 1076 was added to verify this.
+
+- Introducing CURLOPT_CERTINFO and the corresponding CURLINFO_CERTINFO. By
+  enabling this feature with CURLOPT_CERTINFO for a request using SSL (HTTPS
+  or FTPS), libcurl will gather lots of server certificate info and that info
+  can then get extracted by a client after the request has completed with
+  curl_easy_getinfo()'s CURLINFO_CERTINFO option. Linus Nielsen Feltzing
+  helped me test and smoothen out this feature.
+
+  Unfortunately, this feature currently only works with libcurl built to use
+  OpenSSL.
+
+  This feature was sponsored by networking4all.com - thanks!
+
+- Dmitriy Sergeyev pointed out that curl_easy_pause() didn't unpause properly
+  during certain conditions. I also changed this code to use realloc() based
+  on Daniel Fandrich's suggestion.
+
+Guenter Knauf (4 Sep 2008)
+- MingW32 non-configure builds are now largefile feature enabled by default.
+  NetWare LIBC builds are also now largefile feature enabled by default.
+
+Yang Tse (4 Sep 2008)
+- Several fixes related with print formatting string directives.
+
+Daniel Fandrich (3 Sep 2008)
+- Search for the FreeBSD CA cert file /usr/local/share/certs/ca-root.crt
+
+Daniel Fandrich (2 Sep 2008)
+- Fixed an out of memory problem that caused torture test failures in tests
+  706 and 707.
+
+Daniel Stenberg (2 Sep 2008)
+- Keith Mok added supported_protocols and supported_features to the pkg-config
+  file for libcurl, and while doing that fix he unified with curl-config.in
+  how the supported protocols and features are extracted and used, so both those
+  tools should now always be synced.
+
 Version 7.19.0 (1 September 2008)
 
 Daniel Fandrich (29 Aug 2008)

Makefile.am

@@ -77,6 +77,10 @@ endif
 examples:
 	@(cd docs/examples; $(MAKE) check)
 
+clean-local:
+	@(cd tests; $(MAKE) clean)
+	@(cd docs; $(MAKE) clean)
+
 #
 # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
 # must contain the following line:
@@ -105,7 +109,7 @@ rpm:
 	mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm .
 
 #
-# Build a Solaris pkkgadd format file
+# Build a Solaris pkgadd format file
 # run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format
 # file (which ends up back in this directory).
 # The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do

RELEASE-NOTES

@@ -1,69 +1,49 @@
-Curl and libcurl 7.19.0
+Curl and libcurl 7.19.1
 
- Public curl releases:         106
- Command line options:         127
- curl_easy_setopt() options:   153
+ Public curl releases:         107
+ Command line options:         128
+ curl_easy_setopt() options:   158
  Public functions in libcurl:  58
- Known libcurl bindings:       36
- Contributors:                 654
+ Known libcurl bindings:       37
+ Contributors:                 672
 
 This release includes the following changes:
 
- o curl_off_t gets its size/typedef somewhat differently than before. This _may_
-   cause an ABI change for you. See lib/README.curl_off_t for a full explanation.
- 
- o Added CURLINFO_PRIMARY_IP
- o Added CURLOPT_CRLFILE and CURLE_SSL_CRL_BADFILE
- o Added CURLOPT_ISSUERCERT and CURLE_SSL_ISSUER_ERROR
- o curl's option parser for boolean options reworked
- o Added --remote-name-all
- o Now builds for the INTEGRITY operating system
- o Added CURLINFO_APPCONNECT_TIME
- o Added test selection by key word in runtests.pl
- o the curl tool's -w option support the %{ssl_verify_result} variable
- o Added CURLOPT_ADDRESS_SCOPE and scope parsing of the URL according to RFC4007
- o Support --append on SFTP uploads (not with OpenSSH, though)
- o Added curlbuild.h and curlrules.h to the external library interface
+ o pkg-config can now show supported_protocols and supported_features
+ o Added CURLOPT_CERTINFO and CURLINFO_CERTINFO
+ o Added CURLOPT_POSTREDIR
+ o Better detect HTTP 1.0 servers and don't do HTTP 1.1 requests on them
+ o configure --disable-proxy disables proxy support
+ o Added CURLOPT_USERNAME and CURLOPT_PASSWORD
+ o --interface now works with IPv6 connections on glibc systems
+ o Added CURLOPT_PROXYUSERNAME and CURLOPT_PROXYPASSWORD
 
 This release includes the following bugfixes:
 
- o Fixed curl-config --ca
- o Fixed the multi interface connection re-use with NSS-built libcurl
- o connection re-use when using the multi interface with pipelining enabled
- o curl_multi_socket() socket callback fix for close/re-create sockets case
- o SCP or SFTP over socks proxy crashed
- o RC4-MD5 cipher now works with NSS-built libcurl
- o range requests with --head are now done correctly
- o fallback to gettimeofday when monotonic clock is unavailable at run-time
- o range numbers could be made to wrongly get output as signed
- o unexpected 1xx responses hung transfers
- o FTP transfers segfault when using different CURLOPT_FTP_FILEMETHOD
- o c-ares powered libcurls can resolve/use IPv6 addresses
- o poll not working on Windows Vista due to POLLPRI being incorrectly used
- o user-agent in CONNECT with non-HTTP protocols
- o CURL_READFUNC_PAUSE problems fixed
- o --use-ascii now works on Symbian OS, MS-DOS and OS/2
- o CURLINFO_SSL_VERIFYRESULT is fixed
- o FTP URLs and IPv6 URLs mangled when sent to proxy with CURLOPT_PORT set
- o a user name in a proxy URL without a password was parsed incorrectly
- o library will now be built with _REENTRANT symbol defined only if needed
- o no longer link with gdi32 on Windows cross-compiled targets
- o HTTP PUT with -C - sent bad Content-Range: header
- o HTTP PUT or POST with redirect could lead to hang
- o re-use of connections with failed SSL connects in the multi interface
- o NTLM over proxy state was wrongly cleared when host connection was closed
- o Windows SSPI DLL loading is now done in curl_global_init()
- o runtests.pl has an improved find-stunnel-and-invoke
- o FTP sessions could go out of sync on a long header boundary condition
- o potential buffer overflows in the MS-DOS command-line port fixed
- o --stderr is now honoured with the -v option
- o memory leak in libcurl on Windows built with OpenSSL
- o improved curl_m*printf() integral data type size and signedness handling
- o error when --dump-header - used with more than one URL
- o proxy closing connect during CONNECT with auth with the multi interface
- o CURLOPT_UPLOAD sets HTTP method back to GET or HEAD when passed in a 0
- o shared cookies could get locked twice
- o deal with closed connection while doing POST/PUT
+ o MingW32 non-configure builds are now largefile feature enabled by default
+ o NetWare LIBC builds are now largefile feature enabled by default
+ o curl_easy_pause() could behave wrongly on unpause
+ o cookies with invalid expire dates are now considered expired
+ o HTTP pipelining over proxy
+ o fix regression in configure script which affected OpenSSL builds on MSYS
+ o GnuTLS-based multi interface doing HTTPS over proxy failed
+ o recv() failures cause CURLE_RECV_ERROR
+ o SFTP over SOCKS crash fixed
+ o thread-safety issues addressed for NSS-powered libcurls
+ o removed the use of mktime() and gmtime(_r)() in date parsing and conversions
+ o HTTP Digest with a blank realm did wrong
+ o CURLINFO_REDIRECT_URL didn't work with the multi interface
+ o CURLOPT_RANGE now works for SFTP downloads
+ o FTP SIZE response 550 now causes CURLE_REMOTE_FILE_NOT_FOUND
+ o CURLINFO_PRIMARY_IP fixed for persistent connection re-use cases
+ o remove_handle/add_handle multi interface timer callback flaw
+ o CURLINFO_REDIRECT_URL memory leak and wrong-doing
+ o case insensitive string matching works in Turkish too
+ o Solaris builds get _REENTRANT defined properly and work again
+ o Garbage sent on chunky upload after curl_easy_pause()
+ o ipv4 name resolves when libcurl is built with ipv6-enabled c-ares
+ o undersized IPv6 address internal buffer truncated long IPv6 addresses
+ o CURLINFO_FILETIME works for file:// transfers as well
 
 This release includes the following known bugs:
 
@@ -76,13 +56,12 @@ Other curl-related news:
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Lenny Rachitsky, Axel Tillequin, Arnaud Ebalard, Yang Tse, Dan Fandrich,
- Rob Crittenden, Dengminwen, Christopher Palow, Hans-Jurgen May,
- Phil Pellouchoud, Eduard Bloch, John Lightsey, Stephen Collyer, Tor Arntsen,
- Rolland Dudemaine, Phil Blundell, Scott Barrett, Andreas Schuldei,
- Peter Lamberg, David Bau, Pramod Sharma, Yehoshua Hershberg,
- Constantine Sapuntzakis, Lars Nilsson, Andy Tsouladze, Jamie Lokier,
- Vincent Le Normand
+ Keith Mok, Yang Tse, Daniel Fandrich, Guenter Knauf, Dmitriy Sergeyev,
+ Linus Nielsen Feltzing, Martin Drasar, Stefan Krause, Dmitry Kurochkin,
+ Mike Revi, Andres Garcia, Michael Goffioul, Markus Moeller, Rob Crittenden,
+ Jamie Lokier, Emanuele Bovisio, Maxim Ivanov, Ian Lynagh, Daniel Egger,
+ Igor Novoseltsev, John Wilkinson, Pascal Terjan, Steve Roskowski,
+ Daniel Johnson
  
 
         Thanks! (and sorry if I forgot to mention someone)

TODO-RELEASE

@@ -1,26 +1,18 @@
-To be addressed before 7.19.0 (planned release: August 2008)
+To be addressed before 7.19.1 (planned release: November 2008)
 =============================
 
+To be addressed in 7.19.2 (planned release: January 2009)
+=========================
 
-To be addressed before 7.19.1 (planned release: October 2008)
-=============================
+188 - "Curl keep special character in filename when saving" bug #2192220
 
-157 - the CERTINFO patch as posted to:
-      http://curl.haxx.se/mail/lib-2008-08/0105.html
+189 - "NTLM authentication and POST wrong behavior" bug #2203193
 
-158 - Martin Drasar's CURLOPT_POSTREDIR work:
-      http://curl.haxx.se/mail/lib-2008-08/0170.html
+190 - "Using NTLM proxy will lose form-data. Makes NTLM unusable." bug #2210686
 
-162 - Craig Perras' note "http upload: how to stop on error"
-      http://curl.haxx.se/mail/archive-2008-08/0138.html
+191 - "proposed patch for curl/libssh2 bugfix"
+      http://curl.haxx.se/mail/archive-2008-10/0000.html
 
-163 - Detecting illegal attempts at chunked transfers on HTTP 1.0
-      (tests 1069, 1072, 1073)
-      http://curl.haxx.se/mail/archive-2008-08/0435.html
 
-164 - Automatic downgrading to HTTP 1.0 (tests 1071 through 1074)
+192 - 
 
-165 - "Problem with CURLOPT_RESUME_FROM and CURLOPT_APPEND" by Daniele Pinau,
-      recipe: http://curl.haxx.se/mail/lib-2008-08/0439.html
-
-166 -

acinclude.m4

@@ -1235,6 +1235,9 @@ AC_DEFUN([CURL_CHECK_NI_WITHSCOPEID], [
     [ac_cv_working_ni_withscopeid], [
     AC_RUN_IFELSE([
       AC_LANG_PROGRAM([[
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
 #ifdef HAVE_STDIO_H
 #include <stdio.h>
 #endif
@@ -2317,6 +2320,9 @@ AC_DEFUN([CURL_CHECK_LIBS_CLOCK_GETTIME_MONOTONIC], [
       AC_MSG_CHECKING([if monotonic clock_gettime works])
       AC_RUN_IFELSE([
         AC_LANG_PROGRAM([[
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
 #ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>
 #endif
@@ -2559,768 +2565,6 @@ AC_DEFUN([CURL_CHECK_FUNC_SELECT], [
 ])
 
 
-dnl ************************************************************
-dnl check for working getaddrinfo() that works with AI_NUMERICHOST
-dnl
-AC_DEFUN([CURL_CHECK_WORKING_GETADDRINFO],[
-  AC_CACHE_CHECK(for working getaddrinfo, ac_cv_working_getaddrinfo,[
-  AC_TRY_RUN( [
-#include <netdb.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-
-int main(void)
-{
-    struct addrinfo hints, *ai;
-    int error;
-
-    memset(&hints, 0, sizeof(hints));
-    hints.ai_flags = AI_NUMERICHOST;
-    hints.ai_family = AF_UNSPEC;
-    hints.ai_socktype = SOCK_STREAM;
-    error = getaddrinfo("127.0.0.1", "8080", &hints, &ai);
-    if (error) {
-        return 1;
-    }
-    return 0;
-}
-],[
-  ac_cv_working_getaddrinfo="yes"
-],[
-  ac_cv_working_getaddrinfo="no"
-],[
-  ac_cv_working_getaddrinfo="yes"
-])])
-if test "$ac_cv_working_getaddrinfo" = "yes"; then
-  AC_DEFINE(HAVE_GETADDRINFO, 1, [Define if getaddrinfo exists and works])
-  AC_DEFINE(ENABLE_IPV6, 1, [Define if you want to enable IPv6 support])
-
-  IPV6_ENABLED=1
-  AC_SUBST(IPV6_ENABLED)
-fi
-])
-
-
-AC_DEFUN([CURL_CHECK_LOCALTIME_R],
-[
-  dnl check for localtime_r
-  AC_CHECK_FUNCS(localtime_r,[
-    AC_MSG_CHECKING(whether localtime_r is declared)
-    AC_EGREP_CPP(localtime_r,[
-#undef _REENTRANT
-#include <time.h>],[
-      AC_MSG_RESULT(yes)],[
-      AC_MSG_RESULT(no)
-      AC_MSG_CHECKING(whether localtime_r with -D_REENTRANT is declared)
-      AC_EGREP_CPP(localtime_r,[
-#undef _REENTRANT
-#define _REENTRANT
-#include <time.h>],[
-        AC_MSG_RESULT(yes)],
-        AC_MSG_RESULT(no))])])
-])
-
-dnl
-dnl This function checks for strerror_r(). If it isn't found at first, it
-dnl retries with _THREAD_SAFE defined, as that is what AIX seems to require
-dnl in order to find this function.
-dnl
-dnl If the function is found, it will then proceed to check how the function
-dnl actually works: glibc-style or POSIX-style.
-dnl
-dnl glibc:
-dnl      char *strerror_r(int errnum, char *buf, size_t n);
-dnl  
-dnl  What this one does is to return the error string (no surprises there),
-dnl  but it doesn't usually copy anything into buf!  The 'buf' and 'n'
-dnl  parameters are only meant as an optional working area, in case strerror_r
-dnl  needs it.  A quick test on a few systems shows that it's generally not
-dnl  touched at all.
-dnl
-dnl POSIX:
-dnl      int strerror_r(int errnum, char *buf, size_t n);
-dnl
-AC_DEFUN([CURL_CHECK_STRERROR_R],
-[
-  AC_CHECK_FUNCS(strerror_r)
-
-  if test "x$ac_cv_func_strerror_r" = "xyes"; then
-
-    AC_MSG_CHECKING(whether strerror_r is declared)
-    AC_EGREP_CPP(strerror_r,[
-#undef _REENTRANT
-#include <string.h>],[
-      AC_MSG_RESULT(yes)],[
-      AC_MSG_RESULT(no)
-      AC_MSG_CHECKING(whether strerror_r with -D_REENTRANT is declared)
-      AC_EGREP_CPP(strerror_r,[
-#undef _REENTRANT
-#define _REENTRANT
-#include <string.h>],[
-        AC_MSG_RESULT(yes)],
-        AC_MSG_RESULT(no)
-        AC_DEFINE(HAVE_NO_STRERROR_R_DECL, 1, [we have no strerror_r() proto])
-       ) dnl with _THREAD_SAFE
-    ]) dnl plain cpp for it
-
-    dnl determine if this strerror_r() is glibc or POSIX
-    AC_MSG_CHECKING([for a glibc strerror_r API])
-    AC_TRY_RUN([
-#include <string.h>
-#include <errno.h>
-int
-main () {
-  char buffer[1024]; /* big enough to play with */
-  char *string =
-    strerror_r(EACCES, buffer, sizeof(buffer));
-    /* this should've returned a string */
-    if(!string || !string[0])
-      return 99;
-    return 0;
-}
-],
-    GLIBC_STRERROR_R="1"
-    AC_DEFINE(HAVE_GLIBC_STRERROR_R, 1, [we have a glibc-style strerror_r()])
-    AC_MSG_RESULT([yes]),
-    AC_MSG_RESULT([no]),
-
-    dnl Use an inferior method of strerror_r detection while cross-compiling
-    AC_EGREP_CPP(yes, [
-#include <features.h>
-#ifdef __GLIBC__
-yes
-#endif
-], 
-      dnl looks like glibc, so assume a glibc-style strerror_r()
-      GLIBC_STRERROR_R="1"
-      AC_DEFINE(HAVE_GLIBC_STRERROR_R, 1, [we have a glibc-style strerror_r()])
-      AC_MSG_RESULT([yes]),
-      AC_MSG_NOTICE([cannot determine strerror_r() style: edit lib/config.h manually!])
-    ) dnl while cross-compiling
-    )
-
-    if test -z "$GLIBC_STRERROR_R"; then
-
-      AC_MSG_CHECKING([for a POSIX strerror_r API])
-      AC_TRY_RUN([
-#include <string.h>
-#include <errno.h>
-int
-main () {
-  char buffer[1024]; /* big enough to play with */
-  int error =
-    strerror_r(EACCES, buffer, sizeof(buffer));
-    /* This should've returned zero, and written an error string in the
-       buffer.*/
-    if(!buffer[0] || error)
-      return 99;
-    return 0;
-}
-],
-      AC_DEFINE(HAVE_POSIX_STRERROR_R, 1, [we have a POSIX-style strerror_r()])
-      AC_MSG_RESULT([yes]),
-      AC_MSG_RESULT([no]) ,
-      dnl cross-compiling!
-      AC_MSG_NOTICE([cannot determine strerror_r() style: edit lib/config.h manually!])
-    )
-
-    fi dnl if not using glibc API
-
-  fi dnl we have a strerror_r
-
-])
-
-AC_DEFUN([CURL_CHECK_INET_NTOA_R],
-[
-  dnl determine if function definition for inet_ntoa_r exists.
-  AC_CHECK_FUNCS(inet_ntoa_r,[
-    AC_MSG_CHECKING(whether inet_ntoa_r is declared)
-    AC_EGREP_CPP(inet_ntoa_r,[
-#undef _REENTRANT
-#include <arpa/inet.h>],[
-      AC_DEFINE(HAVE_INET_NTOA_R_DECL, 1, [inet_ntoa_r() is declared])
-      AC_MSG_RESULT(yes)],[
-      AC_MSG_RESULT(no)
-      AC_MSG_CHECKING(whether inet_ntoa_r with -D_REENTRANT is declared)
-      AC_EGREP_CPP(inet_ntoa_r,[
-#undef _REENTRANT
-#define _REENTRANT
-#include <arpa/inet.h>],[
-        AC_DEFINE(HAVE_INET_NTOA_R_DECL, 1, [inet_ntoa_r() is declared])
-        AC_MSG_RESULT(yes)],
-        AC_MSG_RESULT(no))])])
-])
-
-
-dnl CURL_CHECK_GETHOSTBYADDR_R
-dnl -------------------------------------------------
-dnl check number of arguments for gethostbyaddr_r, it
-dnl might take either 5, 7, or 8 arguments.
-
-AC_DEFUN([CURL_CHECK_GETHOSTBYADDR_R], [
-  #
-  AC_MSG_CHECKING([for gethostbyaddr_r])
-  AC_LINK_IFELSE([
-    AC_LANG_FUNC_LINK_TRY([gethostbyaddr_r])
-  ],[
-    AC_MSG_RESULT([yes])
-    tmp_cv_gethostbyaddr_r="yes"
-  ],[
-    AC_MSG_RESULT([no])
-    tmp_cv_gethostbyaddr_r="no"
-  ])
-  #
-  if test "$tmp_cv_gethostbyaddr_r" != "yes"; then
-    AC_MSG_CHECKING([deeper for gethostbyaddr_r])
-    AC_LINK_IFELSE([
-      AC_LANG_PROGRAM([[
-      ]],[[
-        gethostbyaddr_r();
-      ]])
-    ],[
-      AC_MSG_RESULT([yes])
-      tmp_cv_gethostbyaddr_r="yes"
-    ],[
-      AC_MSG_RESULT([but still no])
-      tmp_cv_gethostbyaddr_r="no"
-    ])
-  fi
-  #
-  if test "$tmp_cv_gethostbyaddr_r" = "yes"; then
-
-    ac_cv_gethostbyaddr_r_args="unknown"
-
-    AC_MSG_CHECKING([if gethostbyaddr_r takes 5 arguments])
-    AC_COMPILE_IFELSE([
-      AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>
-      ]],[[
-        char * address;
-        int length;
-        int type;
-        struct hostent h;
-        struct hostent_data hdata;
-        int rc;
-        rc = gethostbyaddr_r(address, length, type, &h, &hdata);
-      ]])
-    ],[
-      AC_MSG_RESULT([yes])
-      AC_DEFINE(HAVE_GETHOSTBYADDR_R_5, 1, [gethostbyaddr_r() takes 5 args])
-      ac_cv_gethostbyaddr_r_args="5"
-    ],[
-      AC_MSG_RESULT([no])
-    ])
-
-    if test "$ac_cv_gethostbyaddr_r_args" = "unknown"; then
-      AC_MSG_CHECKING([if gethostbyaddr_r with -D_REENTRANT takes 5 arguments])
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#define _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>
-        ]],[[
-          char * address;
-          int length;
-          int type;
-          struct hostent h;
-          struct hostent_data hdata;
-          int rc;
-          rc = gethostbyaddr_r(address, length, type, &h, &hdata);
-        ]])
-      ],[
-        AC_MSG_RESULT([yes])
-        AC_DEFINE(HAVE_GETHOSTBYADDR_R_5, 1, [gethostbyaddr_r() takes 5 args])
-        ac_cv_gethostbyaddr_r_args="5"
-      ],[
-        AC_MSG_RESULT([no])
-      ])
-    fi
-
-    if test "$ac_cv_gethostbyaddr_r_args" = "unknown"; then
-      AC_MSG_CHECKING([if gethostbyaddr_r takes 7 arguments])
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>
-        ]],[[
-          char * address;
-          int length;
-          int type;
-          struct hostent h;
-          char buffer[8192];
-          int h_errnop;
-          struct hostent * hp;
-          hp = gethostbyaddr_r(address, length, type, &h,
-                               buffer, 8192, &h_errnop);
-        ]])
-      ],[
-        AC_MSG_RESULT([yes])
-        AC_DEFINE(HAVE_GETHOSTBYADDR_R_7, 1, [gethostbyaddr_r() takes 7 args])
-        ac_cv_gethostbyaddr_r_args="7"
-      ],[
-        AC_MSG_RESULT([no])
-      ])
-    fi
-
-    if test "$ac_cv_gethostbyaddr_r_args" = "unknown"; then
-      AC_MSG_CHECKING([if gethostbyaddr_r with -D_REENTRANT takes 7 arguments])
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#define _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>
-        ]],[[
-          char * address;
-          int length;
-          int type;
-          struct hostent h;
-          char buffer[8192];
-          int h_errnop;
-          struct hostent * hp;
-          hp = gethostbyaddr_r(address, length, type, &h,
-                               buffer, 8192, &h_errnop);
-        ]])
-      ],[
-        AC_MSG_RESULT([yes])
-        AC_DEFINE(HAVE_GETHOSTBYADDR_R_7, 1, [gethostbyaddr_r() takes 7 args])
-        ac_cv_gethostbyaddr_r_args="7"
-      ],[
-        AC_MSG_RESULT([no])
-      ])
-    fi
-
-    if test "$ac_cv_gethostbyaddr_r_args" = "unknown"; then
-      AC_MSG_CHECKING([if gethostbyaddr_r takes 8 arguments])
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>
-        ]],[[
-          char * address;
-          int length;
-          int type;
-          struct hostent h;
-          char buffer[8192];
-          int h_errnop;
-          struct hostent * hp;
-          int rc;
-          rc = gethostbyaddr_r(address, length, type, &h,
-                               buffer, 8192, &hp, &h_errnop);
-        ]])
-      ],[
-        AC_MSG_RESULT([yes])
-        AC_DEFINE(HAVE_GETHOSTBYADDR_R_8, 1, [gethostbyaddr_r() takes 8 args])
-        ac_cv_gethostbyaddr_r_args="8"
-      ],[
-        AC_MSG_RESULT([no])
-      ])
-    fi
-
-    if test "$ac_cv_gethostbyaddr_r_args" = "unknown"; then
-      AC_MSG_CHECKING([if gethostbyaddr_r with -D_REENTRANT takes 8 arguments])
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#define _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>
-        ]],[[
-          char * address;
-          int length;
-          int type;
-          struct hostent h;
-          char buffer[8192];
-          int h_errnop;
-          struct hostent * hp;
-          int rc;
-          rc = gethostbyaddr_r(address, length, type, &h,
-                               buffer, 8192, &hp, &h_errnop);
-        ]])
-      ],[
-        AC_MSG_RESULT([yes])
-        AC_DEFINE(HAVE_GETHOSTBYADDR_R_8, 1, [gethostbyaddr_r() takes 8 args])
-        ac_cv_gethostbyaddr_r_args="8"
-      ],[
-        AC_MSG_RESULT([no])
-      ])
-    fi
-
-    if test "$ac_cv_gethostbyaddr_r_args" = "unknown"; then
-      AC_MSG_WARN([Cannot find out how to use gethostbyaddr_r])
-      AC_MSG_WARN([HAVE_GETHOSTBYADDR_R will not be defined])
-      ac_cv_func_gethostbyaddr_r="no"
-    else
-      AC_DEFINE_UNQUOTED(HAVE_GETHOSTBYADDR_R, 1,
-        [Define to 1 if you have the gethostbyaddr_r function.])
-      ac_cv_func_gethostbyaddr_r="yes"
-    fi
-
-  else
-    ac_cv_func_gethostbyaddr_r="no"
-  fi
-])
-
-
-dnl CURL_CHECK_GETHOSTBYNAME_R
-dnl -------------------------------------------------
-dnl check number of arguments for gethostbyname_r, it
-dnl might take either 3, 5, or 6 arguments.
-
-AC_DEFUN([CURL_CHECK_GETHOSTBYNAME_R], [
-  #
-  AC_MSG_CHECKING([for gethostbyname_r])
-  AC_LINK_IFELSE([
-    AC_LANG_FUNC_LINK_TRY([gethostbyname_r])
-  ],[
-    AC_MSG_RESULT([yes])
-    tmp_cv_gethostbyname_r="yes"
-  ],[
-    AC_MSG_RESULT([no])
-    tmp_cv_gethostbyname_r="no"
-  ])
-  #
-  if test "$tmp_cv_gethostbyname_r" != "yes"; then
-    AC_MSG_CHECKING([deeper for gethostbyname_r])
-    AC_LINK_IFELSE([
-      AC_LANG_PROGRAM([[
-      ]],[[
-        gethostbyname_r();
-      ]])
-    ],[
-      AC_MSG_RESULT([yes])
-      tmp_cv_gethostbyname_r="yes"
-    ],[
-      AC_MSG_RESULT([but still no])
-      tmp_cv_gethostbyname_r="no"
-    ])
-  fi
-  #
-  if test "$tmp_cv_gethostbyname_r" = "yes"; then
-
-    ac_cv_gethostbyname_r_args="unknown"
-
-    AC_MSG_CHECKING([if gethostbyname_r takes 3 arguments])
-    AC_COMPILE_IFELSE([
-      AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#include <string.h>
-#include <sys/types.h>
-#include <netdb.h>
-#undef NULL
-#define NULL (void *)0
-        int
-        gethostbyname_r(const char *, struct hostent *,
-                        struct hostent_data *);
-      ]],[[
-        struct hostent_data data;
-        gethostbyname_r(NULL, NULL, NULL);
-      ]])
-    ],[
-      AC_MSG_RESULT([yes])
-      AC_DEFINE(HAVE_GETHOSTBYNAME_R_3, 1, [gethostbyname_r() takes 3 args])
-      ac_cv_gethostbyname_r_args="3"
-    ],[
-      AC_MSG_RESULT([no])
-    ])
-
-    if test "$ac_cv_gethostbyname_r_args" = "unknown"; then
-      AC_MSG_CHECKING([if gethostbyname_r with -D_REENTRANT takes 3 arguments])
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#define _REENTRANT
-#include <string.h>
-#include <sys/types.h>
-#include <netdb.h>
-#undef NULL
-#define NULL (void *)0
-          int
-          gethostbyname_r(const char *, struct hostent *,
-                          struct hostent_data *);
-        ]],[[
-          struct hostent_data data;
-          gethostbyname_r(NULL, NULL, NULL);
-        ]])
-      ],[
-        AC_MSG_RESULT([yes])
-        AC_DEFINE(HAVE_GETHOSTBYNAME_R_3, 1, [gethostbyname_r() takes 3 args])
-        ac_cv_gethostbyname_r_args="3"
-      ],[
-        AC_MSG_RESULT([no])
-      ])
-    fi
-
-    if test "$ac_cv_gethostbyname_r_args" = "unknown"; then
-      AC_MSG_CHECKING([if gethostbyname_r takes 5 arguments])
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>
-#undef NULL
-#define NULL (void *)0
-          struct hostent *
-          gethostbyname_r(const char *, struct hostent *,
-                          char *, int, int *);
-        ]],[[
-          gethostbyname_r(NULL, NULL, NULL, 0, NULL);
-        ]])
-      ],[
-        AC_MSG_RESULT([yes])
-        AC_DEFINE(HAVE_GETHOSTBYNAME_R_5, 1, [gethostbyname_r() takes 5 args])
-        ac_cv_gethostbyname_r_args="5"
-      ],[
-        AC_MSG_RESULT([no])
-      ])
-    fi
-
-    if test "$ac_cv_gethostbyname_r_args" = "unknown"; then
-      AC_MSG_CHECKING([if gethostbyname_r with -D_REENTRANT takes 5 arguments])
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#define _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>
-#undef NULL
-#define NULL (void *)0
-          struct hostent *
-          gethostbyname_r(const char *, struct hostent *,
-                          char *, int, int *);
-        ]],[[
-          gethostbyname_r(NULL, NULL, NULL, 0, NULL);
-        ]])
-      ],[
-        AC_MSG_RESULT([yes])
-        AC_DEFINE(HAVE_GETHOSTBYNAME_R_5, 1, [gethostbyname_r() takes 5 args])
-        ac_cv_gethostbyname_r_args="5"
-      ],[
-        AC_MSG_RESULT([no])
-      ])
-    fi
-
-    if test "$ac_cv_gethostbyname_r_args" = "unknown"; then
-      AC_MSG_CHECKING([if gethostbyname_r takes 6 arguments])
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>
-#undef NULL
-#define NULL (void *)0
-          int
-          gethostbyname_r(const char *, struct hostent *,
-                          char *, size_t, struct hostent **, int *);
-        ]],[[
-          gethostbyname_r(NULL, NULL, NULL, 0, NULL, NULL);
-        ]])
-      ],[
-        AC_MSG_RESULT([yes])
-        AC_DEFINE(HAVE_GETHOSTBYNAME_R_6, 1, [gethostbyname_r() takes 6 args])
-        ac_cv_gethostbyname_r_args="6"
-      ],[
-        AC_MSG_RESULT([no])
-      ])
-    fi
-
-    if test "$ac_cv_gethostbyname_r_args" = "unknown"; then
-      AC_MSG_CHECKING([if gethostbyname_r with -D_REENTRANT takes 6 arguments])
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#undef _REENTRANT
-#define _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>
-#undef NULL
-#define NULL (void *)0
-          int
-          gethostbyname_r(const char *, struct hostent *,
-                          char *, size_t, struct hostent **, int *);
-        ]],[[
-          gethostbyname_r(NULL, NULL, NULL, 0, NULL, NULL);
-        ]])
-      ],[
-        AC_MSG_RESULT([yes])
-        AC_DEFINE(HAVE_GETHOSTBYNAME_R_6, 1, [gethostbyname_r() takes 6 args])
-        ac_cv_gethostbyname_r_args="6"
-      ],[
-        AC_MSG_RESULT([no])
-      ])
-    fi
-
-    if test "$ac_cv_gethostbyname_r_args" = "unknown"; then
-      AC_MSG_WARN([Cannot find out how to use gethostbyname_r])
-      AC_MSG_WARN([HAVE_GETHOSTBYNAME_R will not be defined])
-      ac_cv_func_gethostbyname_r="no"
-    else
-      AC_DEFINE_UNQUOTED(HAVE_GETHOSTBYNAME_R, 1,
-        [Define to 1 if you have the gethostbyname_r function.])
-      ac_cv_func_gethostbyname_r="yes"
-    fi
-
-  else
-    ac_cv_func_gethostbyname_r="no"
-  fi
-])
-
-
-dnl **********************************************************************
-dnl CURL_DETECT_ICC ([ACTION-IF-YES])
-dnl
-dnl check if this is the Intel ICC compiler, and if so run the ACTION-IF-YES
-dnl sets the $ICC variable to "yes" or "no"
-dnl **********************************************************************
-AC_DEFUN([CURL_DETECT_ICC],
-[
-    ICC="no"
-    AC_MSG_CHECKING([for icc in use])
-    if test "$GCC" = "yes"; then
-       dnl check if this is icc acting as gcc in disguise
-       AC_EGREP_CPP([^__INTEL_COMPILER], [__INTEL_COMPILER],
-         dnl action if the text is found, this it has not been replaced by the
-         dnl cpp
-         ICC="no",
-         dnl the text was not found, it was replaced by the cpp
-         ICC="yes"
-         AC_MSG_RESULT([yes])
-         [$1]
-       )
-    fi
-    if test "$ICC" = "no"; then
-        # this is not ICC
-        AC_MSG_RESULT([no])
-    fi
-])
-
-dnl We create a function for detecting which compiler we use and then set as
-dnl pendantic compiler options as possible for that particular compiler. The
-dnl options are only used for debug-builds.
-
-AC_DEFUN([CURL_CC_DEBUG_OPTS],
-[
-    if test "z$ICC" = "z"; then
-      CURL_DETECT_ICC
-    fi
-
-    if test "$GCC" = "yes"; then
-
-       dnl figure out gcc version!
-       AC_MSG_CHECKING([gcc version])
-       gccver=`$CC -dumpversion`
-       num1=`echo $gccver | cut -d . -f1`
-       num2=`echo $gccver | cut -d . -f2`
-       gccnum=`(expr $num1 "*" 100 + $num2) 2>/dev/null`
-       AC_MSG_RESULT($gccver)
-
-       if test "$ICC" = "yes"; then
-         dnl this is icc, not gcc.
-
-         dnl ICC warnings we ignore:
-         dnl * 269 warns on our "%Od" printf formatters for curl_off_t output:
-         dnl   "invalid format string conversion"
-         dnl * 279 warns on static conditions in while expressions
-         dnl * 981 warns on "operands are evaluated in unspecified order"
-         dnl * 1418 "external definition with no prior declaration"
-         dnl * 1419 warns on "external declaration in primary source file"
-         dnl   which we know and do on purpose.
-
-         WARN="-wd279,269,981,1418,1419"
-
-         if test "$gccnum" -gt "600"; then
-            dnl icc 6.0 and older doesn't have the -Wall flag
-            WARN="-Wall $WARN"
-         fi
-       else dnl $ICC = yes
-         dnl this is a set of options we believe *ALL* gcc versions support:
-         WARN="-W -Wall -Wwrite-strings -pedantic -Wpointer-arith -Wnested-externs -Winline -Wmissing-prototypes"
-
-         dnl -Wcast-align is a bit too annoying on all gcc versions ;-)
-
-         if test "$gccnum" -ge "207"; then
-           dnl gcc 2.7 or later
-           WARN="$WARN -Wmissing-declarations"
-         fi
-
-         if test "$gccnum" -gt "295"; then
-           dnl only if the compiler is newer than 2.95 since we got lots of
-           dnl "`_POSIX_C_SOURCE' is not defined" in system headers with
-           dnl gcc 2.95.4 on FreeBSD 4.9!
-           WARN="$WARN -Wundef -Wno-long-long -Wsign-compare -Wshadow -Wno-multichar"
-         fi
-
-         if test "$gccnum" -ge "296"; then
-           dnl gcc 2.96 or later
-           WARN="$WARN -Wfloat-equal"
-         fi
-
-         if test "$gccnum" -gt "296"; then
-           dnl this option does not exist in 2.96
-           WARN="$WARN -Wno-format-nonliteral"
-         fi
-
-         dnl -Wunreachable-code seems totally unreliable on my gcc 3.3.2 on
-         dnl on i686-Linux as it gives us heaps with false positives.
-         dnl Also, on gcc 4.0.X it is totally unbearable and complains all
-         dnl over making it unusable for generic purposes. Let's not use it.
-
-         if test "$gccnum" -ge "303"; then
-           dnl gcc 3.3 and later
-           WARN="$WARN -Wendif-labels -Wstrict-prototypes"
-         fi
-
-         if test "$gccnum" -ge "304"; then
-           # try these on gcc 3.4
-           WARN="$WARN -Wdeclaration-after-statement"
-         fi
-
-         for flag in $CPPFLAGS; do
-           case "$flag" in
-            -I*)
-              dnl Include path, provide a -isystem option for the same dir
-              dnl to prevent warnings in those dirs. The -isystem was not very
-              dnl reliable on earlier gcc versions.
-              add=`echo $flag | sed 's/^-I/-isystem /g'`
-              WARN="$WARN $add"
-              ;;
-           esac
-         done
-
-       fi dnl $ICC = no
-
-       CFLAGS="$CFLAGS $WARN"
-
-      AC_MSG_NOTICE([Added this set of compiler options: $WARN])
-
-    else dnl $GCC = yes
-
-      AC_MSG_NOTICE([Added no extra compiler options])
-
-    fi dnl $GCC = yes
-
-    dnl strip off optimizer flags
-    NEWFLAGS=""
-    for flag in $CFLAGS; do
-      case "$flag" in
-      -O*)
-        dnl echo "cut off $flag"
-        ;;
-      *)
-        NEWFLAGS="$NEWFLAGS $flag"
-        ;;
-      esac
-    done
-    CFLAGS=$NEWFLAGS
-
-]) # AC-DEFUN
-
-
-
 # This is only a temporary fix. This macro is here to replace the broken one
 # delivered by the automake project (including the 1.9.6 release). As soon as
 # they ship a working version we SHOULD remove this work-around.
@@ -3444,6 +2688,7 @@ dnl regarding the paths this will scan:
 dnl /etc/ssl/certs/ca-certificates.crt Debian systems
 dnl /etc/pki/tls/certs/ca-bundle.crt Redhat and Mandriva
 dnl /usr/share/ssl/certs/ca-bundle.crt old(er) Redhat
+dnl /usr/local/share/certs/ca-root.crt FreeBSD
 dnl /etc/ssl/certs/ (ca path) SUSE
 
 AC_DEFUN([CURL_CHECK_CA_BUNDLE], [
@@ -3505,6 +2750,7 @@ AC_HELP_STRING([--without-ca-path], [Don't use a default CA path]),
       for a in /etc/ssl/certs/ca-certificates.crt \
                /etc/pki/tls/certs/ca-bundle.crt \
                /usr/share/ssl/certs/ca-bundle.crt \
+               /usr/local/share/certs/ca-root.crt \
                "$cac"; do
         if test -f "$a"; then
           ca="$a"

ares/CHANGES

@@ -1,5 +1,48 @@
   Changelog for the c-ares project
 
+* Nov 1 2008 (Daniel Stenberg)
+- Carlo Contavalli added support for the glibc "rotate" option, as documented
+  in man resolv.conf: 
+
+  causes round robin selection of nameservers from among those listed.  This
+  has the effect of spreading the query load among all listed servers, rather
+  than having all clients try the first listed server first every time.
+
+  You can enable it with ARES_OPT_ROTATE
+
+* Oct 21 2008 (Yang Tse)
+  Charles Hardin added handling of EINPROGRESS for UDP connects.
+
+* Oct 18 2008 (Daniel Stenberg)
+  Charles Hardin made adig support a regular numerical dotted IP address for the
+  -s option as well.
+
+* Oct 7 2008 (Yang Tse)
+- Added --enable-optimize configure option to enable and disable compiler
+  optimizations to allow decoupled setting from --enable-debug.
+
+* Oct 2 2008 (Yang Tse)
+- Added --enable-warnings configure option to enable and disable strict
+  compiler warnings to allow decoupled setting from --enable-debug.
+
+* Sep 17 2008 (Yang Tse)
+- Code reorganization to allow internal/private use of "nameser.h" to any
+  system that lacks arpa/nameser.h or arpa/nameser_compat.h header files.
+
+* Sep 16 2008 (Yang Tse)
+- Code reorganization to allow internal/private use of ares_writev to any
+  system that lacks the writev function.
+
+* Sep 15 2008 (Yang Tse)
+- Code reorganization to allow internal/private use of ares_strcasecmp to any
+  system that lacks the strcasecmp function.
+
+- Improve configure detection of some string functions.
+
+* Sep 11 2008 (Yang Tse)
+- Code reorganization to allow internal/private use of ares_strdup to any
+  system that lacks the strdup function.
+
 Version 1.5.3 (Aug 29, 2008)
 
 * Aug 25 2008 (Yang Tse)

ares/Makefile.am

@@ -45,7 +45,8 @@ noinst_PROGRAMS =$(PROGS)
 # regular sources and headers
 EXTRA_DIST = AUTHORS CHANGES README.cares Makefile.inc Makefile.dj	   \
  Makefile.m32 Makefile.netware Makefile.vc6 $(man_MANS) $(MSVCFILES)	   \
- config-win32.h RELEASE-NOTES libcares.pc.in buildconf get_ver.awk maketgz
+ config-win32.h RELEASE-NOTES libcares.pc.in buildconf get_ver.awk maketgz \
+ TODO
 
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = libcares.pc

ares/Makefile.dj

@@ -28,7 +28,8 @@ CFLAGS += -DWATT32 -DHAVE_AF_INET6 -DHAVE_PF_INET6 -DHAVE_IOCTLSOCKET \
           -DRECVFROM_TYPE_ARG3='int' -DRECVFROM_TYPE_ARG4='int' \
           -DRECVFROM_TYPE_ARG6='int' -DRECVFROM_TYPE_RETV='int' \
           -DRECVFROM_TYPE_ARG5='struct sockaddr' -DHAVE_RECVFROM \
-          -DRECVFROM_TYPE_ARG2_IS_VOID
+          -DRECVFROM_TYPE_ARG2_IS_VOID -DHAVE_STRDUP -DHAVE_NETDB_H \
+          -DHAVE_ARPA_INET_H -DHAVE_STRCASECMP -DHAVE_STRNCASECMP
 
 LDFLAGS = -s
 

ares/Makefile.inc

@@ -3,14 +3,14 @@ ares_query.c ares__close_sockets.c ares_free_string.c ares_search.c	\
 ares__get_hostent.c ares_gethostbyaddr.c ares_send.c ares__read_line.c	\
 ares_gethostbyname.c ares_strerror.c ares_cancel.c ares_init.c		\
 ares_timeout.c ares_destroy.c ares_mkquery.c ares_version.c		\
-ares_expand_name.c ares_parse_a_reply.c windows_port.c			\
+ares_expand_name.c ares_parse_a_reply.c windows_port.c ares_strdup.c	\
 ares_expand_string.c ares_parse_ptr_reply.c ares_parse_aaaa_reply.c	\
-ares_getnameinfo.c inet_net_pton.c bitncmp.c inet_ntop.c		\
-ares_parse_ns_reply.c ares_llist.c ares__timeval.c
+ares_getnameinfo.c inet_net_pton.c bitncmp.c inet_ntop.c ares_writev.c	\
+ares_parse_ns_reply.c ares_llist.c ares__timeval.c ares_strcasecmp.c
 
 HHEADERS = ares.h ares_private.h setup.h ares_dns.h ares_version.h          \
-           nameser.h inet_net_pton.h inet_ntop.h ares_ipv6.h bitncmp.h      \
-           setup_once.h ares_llist.h
+ nameser.h inet_net_pton.h inet_ntop.h ares_ipv6.h bitncmp.h setup_once.h   \
+ ares_llist.h ares_strdup.h ares_strcasecmp.h ares_writev.h
 
 MANPAGES= ares_destroy.3 ares_expand_name.3 ares_expand_string.3 ares_fds.3 \
  ares_free_hostent.3 ares_free_string.3 ares_gethostbyaddr.3		    \

ares/Makefile.netware

@@ -160,7 +160,7 @@ lib: prebuild $(LTARGET)
 
 nlm: prebuild $(TARGETS)
 
-prebuild: $(OBJDIR) $(OBJDIR)/version.inc config.h arpa/nameser.h
+prebuild: $(OBJDIR) $(OBJDIR)/version.inc config.h
 
 install: $(INSTDIR) all
 	@$(CP) *.nlm $(INSTDIR)
@@ -282,6 +282,8 @@ config.h: Makefile.netware
 	@echo $(DL)#define PACKAGE_BUGREPORT "a suitable curl mailing list => http://curl.haxx.se/mail/"$(DL) >> $@
 ifeq ($(LIBARCH),CLIB)
 	@echo $(DL)#define OS "i586-pc-clib-NetWare"$(DL) >> $@
+	@echo $(DL)#define HAVE_STRICMP 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRNICMP 1$(DL) >> $@
 	@echo $(DL)#define NETDB_USE_INTERNET 1$(DL) >> $@
 	@echo $(DL)#define RECV_TYPE_ARG1 int$(DL) >> $@
 	@echo $(DL)#define RECV_TYPE_ARG2 char *$(DL) >> $@
@@ -302,15 +304,12 @@ ifeq ($(LIBARCH),CLIB)
 	@echo $(DL)#define SEND_TYPE_ARG4 int$(DL) >> $@
 	@echo $(DL)#define SEND_TYPE_RETV int$(DL) >> $@
 	@echo $(DL)#define socklen_t int$(DL) >> $@
-	@echo $(DL)#define strncasecmp strnicmp$(DL) >> $@
-	@echo $(DL)#define strcasecmp stricmp$(DL) >> $@
 else
 	@echo $(DL)#define OS "i586-pc-libc-NetWare"$(DL) >> $@
 	@echo $(DL)#define HAVE_DLFCN_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_DLOPEN 1$(DL) >> $@
 	@echo $(DL)#define HAVE_FTRUNCATE 1$(DL) >> $@
 	@echo $(DL)#define HAVE_GETTIMEOFDAY 1$(DL) >> $@
-	@echo $(DL)#define HAVE_INET_PTON 1$(DL) >> $@
 	@echo $(DL)#define HAVE_INTTYPES_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LIMITS_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LONGLONG 1$(DL) >> $@
@@ -348,7 +347,6 @@ else
 	@echo $(DL)#define SIZEOF_STRUCT_IN6_ADDR 16$(DL) >> $@
 endif
 	@echo $(DL)#define HAVE_ARPA_INET_H 1$(DL) >> $@
-	@echo $(DL)#define HAVE_ARPA_NAMESER_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_ASSERT_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_ERR_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_FCNTL_H 1$(DL) >> $@
@@ -358,7 +356,6 @@ endif
 	@echo $(DL)#define HAVE_GETPROTOBYNAME 1$(DL) >> $@
 	@echo $(DL)#define HAVE_GMTIME_R 1$(DL) >> $@
 	@echo $(DL)#define HAVE_INET_ADDR 1$(DL) >> $@
-	@echo $(DL)#define HAVE_INET_NTOA 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LL 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LOCALTIME_R 1$(DL) >> $@
 	@echo $(DL)#define HAVE_MALLOC_H 1$(DL) >> $@
@@ -387,6 +384,7 @@ endif
 	@echo $(DL)#define HAVE_UNISTD_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_UTIME 1$(DL) >> $@
 	@echo $(DL)#define HAVE_UTIME_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_WRITEV 1$(DL) >> $@
 	@echo $(DL)#define RETSIGTYPE void$(DL) >> $@
 	@echo $(DL)#define SIZEOF_STRUCT_IN_ADDR 4$(DL) >> $@
 	@echo $(DL)#define STDC_HEADERS 1$(DL) >> $@
@@ -408,9 +406,3 @@ ifdef OLD_NOVELLSDK
 	@echo $(DL)#define socklen_t int$(DL) >> $@
 endif
 
-arpa/nameser.h: nameser.h
-	@echo Fix missing header $@
-	@-mkdir arpa
-	@$(CP) $< arpa
-
-

ares/Makefile.vc6

@@ -57,6 +57,7 @@ OBJECTS = $(OBJ_DIR)\ares_fds.obj              \
           $(OBJ_DIR)\ares__read_line.obj       \
           $(OBJ_DIR)\ares_gethostbyname.obj    \
           $(OBJ_DIR)\ares_getnameinfo.obj      \
+          $(OBJ_DIR)\ares_strcasecmp.obj       \
           $(OBJ_DIR)\ares_strerror.obj         \
           $(OBJ_DIR)\ares_cancel.obj           \
           $(OBJ_DIR)\ares_init.obj             \
@@ -73,6 +74,7 @@ OBJECTS = $(OBJ_DIR)\ares_fds.obj              \
           $(OBJ_DIR)\windows_port.obj          \
           $(OBJ_DIR)\ares_expand_string.obj    \
           $(OBJ_DIR)\ares_parse_ptr_reply.obj  \
+          $(OBJ_DIR)\ares_writev.obj           \
           $(OBJ_DIR)\bitncmp.obj               \
           $(OBJ_DIR)\inet_net_pton.obj         \
           $(OBJ_DIR)\inet_ntop.obj
@@ -184,6 +186,8 @@ $(OBJ_DIR)\ares__read_line.obj: ares__read_line.c setup.h setup_once.h ares.h  \
 $(OBJ_DIR)\ares_gethostbyname.obj: ares_gethostbyname.c setup.h setup_once.h   \
   nameser.h ares.h ares_private.h ares_ipv6.h inet_net_pton.h bitncmp.h
 
+$(OBJ_DIR)\ares_strcasecmp.obj: ares_strcasecmp.c setup.h setup_once.h ares.h
+
 $(OBJ_DIR)\ares_strerror.obj: ares_strerror.c setup.h setup_once.h ares.h
 
 $(OBJ_DIR)\ares_cancel.obj: ares_cancel.c setup.h setup_once.h ares.h          \
@@ -243,3 +247,6 @@ $(OBJ_DIR)\ares_getopt.obj: ares_getopt.c ares_getopt.h
 
 $(OBJ_DIR)\ares_llist.obj: ares_llist.c setup.h setup_once.h ares.h            \
   ares_private.h ares_llist.h
+
+$(OBJ_DIR)\ares_writev.obj: ares_writev.c setup.h setup_once.h ares.h          \
+  ares_writev.h

ares/RELEASE-NOTES

@@ -1,6 +1,7 @@
 This is what's new and changed in the c-ares 1.5.4 release:
 
- o 
+ o improved configure detection of several functions
+ o improved source code portability
 
 Thanks go to these friendly people for their efforts and contributions:
 

ares/TODO

@@ -0,0 +1,8 @@
+TODO
+====
+
+ares_gethostbyname
+
+- When built to support IPv6, it needs to also support PF_UNSPEC or similar,
+  so that an application can ask for any protocol and then c-ares would return
+  all known resolves and not just explicitly IPv4 _or_ IPv6 resolves.

ares/acinclude.m4

@@ -702,6 +702,9 @@ AC_DEFUN([CURL_CHECK_NI_WITHSCOPEID], [
     [ac_cv_working_ni_withscopeid], [
     AC_RUN_IFELSE([
       AC_LANG_PROGRAM([[
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
 #ifdef HAVE_STDIO_H
 #include <stdio.h>
 #endif
@@ -1785,6 +1788,9 @@ AC_DEFUN([CURL_CHECK_LIBS_CLOCK_GETTIME_MONOTONIC], [
       AC_MSG_CHECKING([if monotonic clock_gettime works])
       AC_RUN_IFELSE([
         AC_LANG_PROGRAM([[
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
 #ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>
 #endif
@@ -1827,160 +1833,6 @@ AC_DEFUN([CURL_CHECK_LIBS_CLOCK_GETTIME_MONOTONIC], [
 ])
 
 
-dnl **********************************************************************
-dnl CURL_DETECT_ICC ([ACTION-IF-YES])
-dnl
-dnl check if this is the Intel ICC compiler, and if so run the ACTION-IF-YES
-dnl sets the $ICC variable to "yes" or "no"
-dnl **********************************************************************
-AC_DEFUN([CURL_DETECT_ICC],
-[
-    ICC="no"
-    AC_MSG_CHECKING([for icc in use])
-    if test "$GCC" = "yes"; then
-       dnl check if this is icc acting as gcc in disguise
-       AC_EGREP_CPP([^__INTEL_COMPILER], [__INTEL_COMPILER],
-         dnl action if the text is found, this it has not been replaced by the
-         dnl cpp
-         ICC="no",
-         dnl the text was not found, it was replaced by the cpp
-         ICC="yes"
-         AC_MSG_RESULT([yes])
-         [$1]
-       )
-    fi
-    if test "$ICC" = "no"; then
-        # this is not ICC
-        AC_MSG_RESULT([no])
-    fi
-])
-
-dnl We create a function for detecting which compiler we use and then set as
-dnl pendantic compiler options as possible for that particular compiler. The
-dnl options are only used for debug-builds.
-
-dnl This is a copy of the original found in curl's configure script. Don't
-dnl modify this one, edit the one in curl and copy it back here when that one
-dnl is changed.
-
-AC_DEFUN([CURL_CC_DEBUG_OPTS],
-[
-    if test "z$ICC" = "z"; then
-      CURL_DETECT_ICC
-    fi
-
-    if test "$GCC" = "yes"; then
-
-       dnl figure out gcc version!
-       AC_MSG_CHECKING([gcc version])
-       gccver=`$CC -dumpversion`
-       num1=`echo $gccver | cut -d . -f1`
-       num2=`echo $gccver | cut -d . -f2`
-       gccnum=`(expr $num1 "*" 100 + $num2) 2>/dev/null`
-       AC_MSG_RESULT($gccver)
-
-       if test "$ICC" = "yes"; then
-         dnl this is icc, not gcc.
-
-         dnl ICC warnings we ignore:
-         dnl * 269 warns on our "%Od" printf formatters for curl_off_t output:
-         dnl   "invalid format string conversion"
-         dnl * 279 warns on static conditions in while expressions
-         dnl * 981 warns on "operands are evaluated in unspecified order"
-         dnl * 1418 "external definition with no prior declaration"
-         dnl * 1419 warns on "external declaration in primary source file"
-         dnl   which we know and do on purpose.
-
-         WARN="-wd279,269,981,1418,1419"
-
-         if test "$gccnum" -gt "600"; then
-            dnl icc 6.0 and older doesn't have the -Wall flag
-            WARN="-Wall $WARN"
-         fi
-       else dnl $ICC = yes
-         dnl this is a set of options we believe *ALL* gcc versions support:
-         WARN="-W -Wall -Wwrite-strings -pedantic -Wpointer-arith -Wnested-externs -Winline -Wmissing-prototypes"
-
-         dnl -Wcast-align is a bit too annoying on all gcc versions ;-)
-
-         if test "$gccnum" -ge "207"; then
-           dnl gcc 2.7 or later
-           WARN="$WARN -Wmissing-declarations"
-         fi
-
-         if test "$gccnum" -gt "295"; then
-           dnl only if the compiler is newer than 2.95 since we got lots of
-           dnl "`_POSIX_C_SOURCE' is not defined" in system headers with
-           dnl gcc 2.95.4 on FreeBSD 4.9!
-           WARN="$WARN -Wundef -Wno-long-long -Wsign-compare -Wshadow -Wno-multichar"
-         fi
-
-         if test "$gccnum" -ge "296"; then
-           dnl gcc 2.96 or later
-           WARN="$WARN -Wfloat-equal"
-         fi
-
-         if test "$gccnum" -gt "296"; then
-           dnl this option does not exist in 2.96
-           WARN="$WARN -Wno-format-nonliteral"
-         fi
-
-         dnl -Wunreachable-code seems totally unreliable on my gcc 3.3.2 on
-         dnl on i686-Linux as it gives us heaps with false positives.
-         dnl Also, on gcc 4.0.X it is totally unbearable and complains all
-         dnl over making it unusable for generic purposes. Let's not use it.
-
-         if test "$gccnum" -ge "303"; then
-           dnl gcc 3.3 and later
-           WARN="$WARN -Wendif-labels -Wstrict-prototypes"
-         fi
-
-         if test "$gccnum" -ge "304"; then
-           # try these on gcc 3.4
-           WARN="$WARN -Wdeclaration-after-statement"
-         fi
-
-         for flag in $CPPFLAGS; do
-           case "$flag" in
-            -I*)
-              dnl Include path, provide a -isystem option for the same dir
-              dnl to prevent warnings in those dirs. The -isystem was not very
-              dnl reliable on earlier gcc versions.
-              add=`echo $flag | sed 's/^-I/-isystem /g'`
-              WARN="$WARN $add"
-              ;;
-           esac
-         done
-
-       fi dnl $ICC = no
-
-       CFLAGS="$CFLAGS $WARN"
-
-      AC_MSG_NOTICE([Added this set of compiler options: $WARN])
-
-    else dnl $GCC = yes
-
-      AC_MSG_NOTICE([Added no extra compiler options])
-
-    fi dnl $GCC = yes
-
-    dnl strip off optimizer flags
-    NEWFLAGS=""
-    for flag in $CFLAGS; do
-      case "$flag" in
-      -O*)
-        dnl echo "cut off $flag"
-        ;;
-      *)
-        NEWFLAGS="$NEWFLAGS $flag"
-        ;;
-      esac
-    done
-    CFLAGS=$NEWFLAGS
-
-])
-
-
 dnl This macro determines if the specified struct exists in the specified file
 dnl Syntax:
 dnl CARES_CHECK_STRUCT(headers, struct name, if found, [if not found])
@@ -2026,132 +1878,3 @@ AC_DEFUN([CARES_CHECK_CONSTANT], [
   fi
 ])
 
-
-dnl CARES_CHECK_GETSERVBYPORT_R
-dnl -------------------------------------------------
-dnl Test if the getservbyport_r function is available,
-dnl and find out how many parameters it takes.
-
-AC_DEFUN([CARES_CHECK_GETSERVBYPORT_R], [
-  AC_CHECK_HEADERS(sys/types.h netdb.h)
-  #
-  AC_MSG_CHECKING([for getservbyport_r])
-  AC_LINK_IFELSE([
-    AC_LANG_FUNC_LINK_TRY([getservbyport_r])
-  ],[
-    AC_MSG_RESULT([yes])
-    cares_cv_getservbyport_r="yes"
-  ],[
-    AC_MSG_RESULT([no])
-    cares_cv_getservbyport_r="no"
-  ])
-  #
-  if test "$cares_cv_getservbyport_r" != "yes"; then
-    AC_MSG_CHECKING([deeper for getservbyport_r])
-    AC_LINK_IFELSE([
-      AC_LANG_PROGRAM([[
-      ]],[[
-        getservbyport_r();
-      ]])
-    ],[
-      AC_MSG_RESULT([yes])
-      cares_cv_getservbyport_r="yes"
-    ],[
-      AC_MSG_RESULT([but still no])
-      cares_cv_getservbyport_r="no"
-    ])
-  fi
-  #
-  if test "$cares_cv_getservbyport_r" = "yes"; then
-    AC_MSG_CHECKING([how many arguments getservbyport_r takes])
-    cares_cv_getservbyport_r_nargs="unknown"
-    #
-    AC_COMPILE_IFELSE([
-      AC_LANG_PROGRAM([[
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-        extern int
-        getservbyport_r(int, const char*, struct servent*,
-                        char*, size_t, struct servent**);
-      ]],[[
-        int p1, res;
-        size_t p5;
-        char *p2, p4[4096];
-        struct servent *p3, *p6;
-        res = getservbyport_r(p1, p2, p3, p4, p5, &p6);
-      ]])
-    ],[
-      cares_cv_getservbyport_r_nargs="6"
-    ])
-    #
-    if test "$cares_cv_getservbyport_r_nargs" = "unknown"; then
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-          extern struct servent*
-          getservbyport_r(int, const char*, struct servent*,
-                          char*, int);
-        ]],[[
-          int p1, p5;
-          char *p2, p4[4096];
-          struct servent *p3, res;
-          res = getservbyport_r(p1, p2, p3, p4, p5);
-        ]])
-      ],[
-        cares_cv_getservbyport_r_nargs="5"
-      ])
-    fi
-    #
-    if test "$cares_cv_getservbyport_r_nargs" = "unknown"; then
-      AC_COMPILE_IFELSE([
-        AC_LANG_PROGRAM([[
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-          extern int
-          getservbyport_r(int, const char*, struct servent*,
-                          struct servent_data*);
-        ]],[[
-          int p1, res;
-          char *p2;
-          struct servent *p3;
-          struct servent_data *p4;
-          res = getservbyport_r(p1, p2, p3, p4);
-        ]])
-      ],[
-        cares_cv_getservbyport_r_nargs="4"
-      ])
-    fi
-    #
-    AC_MSG_RESULT([$cares_cv_getservbyport_r_nargs])
-    #
-    if test "$cares_cv_getservbyport_r_nargs" = "unknown"; then
-      AC_MSG_WARN([HAVE_GETSERVBYPORT_R will not be defined])
-    else
-      AC_DEFINE(HAVE_GETSERVBYPORT_R, 1,
-        [Specifies whether getservbyport_r is present])
-      AC_DEFINE_UNQUOTED(GETSERVBYPORT_R_ARGS, $cares_cv_getservbyport_r_nargs,
-        [Specifies the number of arguments to getservbyport_r])
-      if test "$cares_cv_getservbyport_r_nargs" = "4" ; then
-        AC_DEFINE(GETSERVBYPORT_R_BUFSIZE, sizeof(struct servent_data),
-          [Specifies the size of the buffer to pass to getservbyport_r])
-      else
-        AC_DEFINE(GETSERVBYPORT_R_BUFSIZE, 4096,
-          [Specifies the size of the buffer to pass to getservbyport_r])
-      fi
-    fi
-    #
-  fi
-])

ares/acountry.c

@@ -60,6 +60,21 @@
 #include "inet_net_pton.h"
 #include "inet_ntop.h"
 
+#ifndef HAVE_STRDUP
+#  include "ares_strdup.h"
+#  define strdup(ptr) ares_strdup(ptr)
+#endif
+
+#ifndef HAVE_STRCASECMP
+#  include "ares_strcasecmp.h"
+#  define strcasecmp(p1,p2) ares_strcasecmp(p1,p2)
+#endif
+
+#ifndef HAVE_STRNCASECMP
+#  include "ares_strcasecmp.h"
+#  define strncasecmp(p1,p2,n) ares_strncasecmp(p1,p2,n)
+#endif
+
 #ifndef INADDR_NONE
 #define INADDR_NONE 0xffffffff
 #endif
@@ -240,7 +255,7 @@ struct search_list {
        const char *long_name;      /* normal country name */
      };
 
-const struct search_list *list_lookup(int number, const struct search_list *list, int num)
+static const struct search_list *list_lookup(int number, const struct search_list *list, int num)
 {
   while (num > 0 && list->long_name)
     {
@@ -508,7 +523,8 @@ static int is_addr(char *str, char **end)
 {
   int a0, a1, a2, a3, num, rc = 0, length = 0;
 
-  if ((num = sscanf(str,"%3d.%3d.%3d.%3d%n",&a0,&a1,&a2,&a3,&length)) == 4 &&
+  num = sscanf(str,"%3d.%3d.%3d.%3d%n",&a0,&a1,&a2,&a3,&length);
+  if( (num == 4) &&
       BYTE_OK(a0) && BYTE_OK(a1) && BYTE_OK(a2) && BYTE_OK(a3) &&
       length >= (3+4))
     {
@@ -536,6 +552,7 @@ static void find_country_from_cname(const char *cname, struct in_addr addr)
   z0 = tolower(cname[0]);
   z1 = tolower(cname[1]);
   ccopy = strdup(cname);
+  dot_4 = NULL;
 
   ver_1 = (z0 == 'z' && z1 == 'z' && !strcasecmp(cname+4,nerd_ver1));
   ver_2 = (is_addr(ccopy,&dot_4) && !strcasecmp(dot_4,nerd_ver2));
@@ -567,8 +584,8 @@ static void find_country_from_cname(const char *cname, struct in_addr addr)
 
   if (ver_1)
     {
-      ccode_A2[0] = tolower(cname[2]);
-      ccode_A2[1] = tolower(cname[3]);
+      ccode_A2[0] = (char)tolower(cname[2]);
+      ccode_A2[1] = (char)tolower(cname[3]);
       ccode_A2[2] = '\0';
     }
   else

ares/adig.c

@@ -17,26 +17,35 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
+#ifdef HAVE_SYS_SOCKET_H
+#  include <sys/socket.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
+#endif
+#ifdef HAVE_ARPA_INET_H
+#  include <arpa/inet.h>
+#endif
+#ifdef HAVE_NETDB_H
+#  include <netdb.h>
+#endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
 #endif
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
 #ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
+#  include <arpa/nameser_compat.h>
+#endif
+
+#ifdef HAVE_SYS_TIME_H
+#  include <sys/time.h>
 #endif
 #ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#include <netdb.h>
+#  include <unistd.h>
 #endif
 #ifdef HAVE_STRINGS_H
-#include <strings.h>
+#  include <strings.h>
 #endif
 
 #include <stdio.h>
@@ -48,8 +57,24 @@
 #include "ares.h"
 #include "ares_dns.h"
 #include "inet_ntop.h"
+#include "inet_net_pton.h"
 #include "ares_getopt.h"
 
+#ifndef HAVE_STRDUP
+#  include "ares_strdup.h"
+#  define strdup(ptr) ares_strdup(ptr)
+#endif
+
+#ifndef HAVE_STRCASECMP
+#  include "ares_strcasecmp.h"
+#  define strcasecmp(p1,p2) ares_strcasecmp(p1,p2)
+#endif
+
+#ifndef HAVE_STRNCASECMP
+#  include "ares_strcasecmp.h"
+#  define strncasecmp(p1,p2,n) ares_strncasecmp(p1,p2,n)
+#endif
+
 #ifdef WATT32
 #undef WIN32  /* Redefined in MingW headers */
 #endif
@@ -127,6 +152,7 @@ static const char *opcodes[] = {
   "UPDATEA", "UPDATED", "UPDATEDA", "UPDATEM", "UPDATEMA",
   "ZONEINIT", "ZONEREF"
 };
+  struct in_addr inaddr;
 
 static const char *rcodes[] = {
   "NOERROR", "FORMERR", "SERVFAIL", "NXDOMAIN", "NOTIMP", "REFUSED",
@@ -188,11 +214,15 @@ int main(int argc, char **argv)
 
         case 's':
           /* Add a server, and specify servers in the option mask. */
-          hostent = gethostbyname(optarg);
-          if (!hostent || hostent->h_addrtype != AF_INET)
+          if (ares_inet_pton(AF_INET, optarg, &inaddr) <= 0)
             {
-              fprintf(stderr, "adig: server %s not found.\n", optarg);
-              return 1;
+              hostent = gethostbyname(optarg);
+              if (!hostent || hostent->h_addrtype != AF_INET)
+                {
+                  fprintf(stderr, "adig: server %s not found.\n", optarg);
+                  return 1;
+                }
+              memcpy(&inaddr, hostent->h_addr, sizeof(struct in_addr));
             }
           options.servers = realloc(options.servers, (options.nservers + 1)
                                     * sizeof(struct in_addr));
@@ -201,7 +231,7 @@ int main(int argc, char **argv)
               fprintf(stderr, "Out of memory!\n");
               return 1;
             }
-          memcpy(&options.servers[options.nservers], hostent->h_addr,
+          memcpy(&options.servers[options.nservers], &inaddr,
                  sizeof(struct in_addr));
           options.nservers++;
           optmask |= ARES_OPT_SERVERS;
@@ -436,13 +466,16 @@ static const unsigned char *display_rr(const unsigned char *aptr,
                                        const unsigned char *abuf, int alen)
 {
   const unsigned char *p;
-  char *name;
   int type, dnsclass, ttl, dlen, status;
   long len;
   char addr[46];
+  union {
+    unsigned char * as_uchar;
+             char * as_char;
+  } name;
 
   /* Parse the RR name. */
-  status = ares_expand_name(aptr, abuf, alen, &name, &len);
+  status = ares_expand_name(aptr, abuf, alen, &name.as_char, &len);
   if (status != ARES_SUCCESS)
     return NULL;
   aptr += len;
@@ -452,7 +485,7 @@ static const unsigned char *display_rr(const unsigned char *aptr,
    */
   if (aptr + RRFIXEDSZ > abuf + alen)
     {
-      ares_free_string(name);
+      ares_free_string(name.as_char);
       return NULL;
     }
 
@@ -465,16 +498,16 @@ static const unsigned char *display_rr(const unsigned char *aptr,
   aptr += RRFIXEDSZ;
   if (aptr + dlen > abuf + alen)
     {
-      ares_free_string(name);
+      ares_free_string(name.as_char);
       return NULL;
     }
 
   /* Display the RR name, class, and type. */
-  printf("\t%-15s.\t%d", name, ttl);
+  printf("\t%-15s.\t%d", name.as_char, ttl);
   if (dnsclass != C_IN)
     printf("\t%s", class_name(dnsclass));
   printf("\t%s", type_name(type));
-  ares_free_string(name);
+  ares_free_string(name.as_char);
 
   /* Display the RR data.  Don't touch aptr. */
   switch (type)
@@ -488,11 +521,11 @@ static const unsigned char *display_rr(const unsigned char *aptr,
     case T_NS:
     case T_PTR:
       /* For these types, the RR data is just a domain name. */
-      status = ares_expand_name(aptr, abuf, alen, &name, &len);
+      status = ares_expand_name(aptr, abuf, alen, &name.as_char, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t%s.", name);
-      ares_free_string(name);
+      printf("\t%s.", name.as_char);
+      ares_free_string(name.as_char);
       break;
 
     case T_HINFO:
@@ -512,17 +545,17 @@ static const unsigned char *display_rr(const unsigned char *aptr,
     case T_MINFO:
       /* The RR data is two domain names. */
       p = aptr;
-      status = ares_expand_name(p, abuf, alen, &name, &len);
+      status = ares_expand_name(p, abuf, alen, &name.as_char, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t%s.", name);
-      ares_free_string(name);
+      printf("\t%s.", name.as_char);
+      ares_free_string(name.as_char);
       p += len;
-      status = ares_expand_name(p, abuf, alen, &name, &len);
+      status = ares_expand_name(p, abuf, alen, &name.as_char, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t%s.", name);
-      ares_free_string(name);
+      printf("\t%s.", name.as_char);
+      ares_free_string(name.as_char);
       break;
 
     case T_MX:
@@ -532,11 +565,11 @@ static const unsigned char *display_rr(const unsigned char *aptr,
       if (dlen < 2)
         return NULL;
       printf("\t%d", DNS__16BIT(aptr));
-      status = ares_expand_name(aptr + 2, abuf, alen, &name, &len);
+      status = ares_expand_name(aptr + 2, abuf, alen, &name.as_char, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t%s.", name);
-      ares_free_string(name);
+      printf("\t%s.", name.as_char);
+      ares_free_string(name.as_char);
       break;
 
     case T_SOA:
@@ -544,17 +577,17 @@ static const unsigned char *display_rr(const unsigned char *aptr,
        * numbers giving the serial number and some timeouts.
        */
       p = aptr;
-      status = ares_expand_name(p, abuf, alen, &name, &len);
+      status = ares_expand_name(p, abuf, alen, &name.as_char, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t%s.\n", name);
-      ares_free_string(name);
+      printf("\t%s.\n", name.as_char);
+      ares_free_string(name.as_char);
       p += len;
-      status = ares_expand_name(p, abuf, alen, &name, &len);
+      status = ares_expand_name(p, abuf, alen, &name.as_char, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t\t\t\t\t\t%s.\n", name);
-      ares_free_string(name);
+      printf("\t\t\t\t\t\t%s.\n", name.as_char);
+      ares_free_string(name.as_char);
       p += len;
       if (p + 20 > aptr + dlen)
         return NULL;
@@ -605,11 +638,11 @@ static const unsigned char *display_rr(const unsigned char *aptr,
       printf(" %d", DNS__16BIT(aptr + 2));
       printf(" %d", DNS__16BIT(aptr + 4));
 
-      status = ares_expand_name(aptr + 6, abuf, alen, &name, &len);
+      status = ares_expand_name(aptr + 6, abuf, alen, &name.as_char, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t%s.", name);
-      ares_free_string(name);
+      printf("\t%s.", name.as_char);
+      ares_free_string(name.as_char);
       break;
 
     case T_NAPTR:
@@ -618,32 +651,32 @@ static const unsigned char *display_rr(const unsigned char *aptr,
       printf(" %d\n", DNS__16BIT(aptr + 2)); /* preference */
 
       p = aptr + 4;
-      status = ares_expand_string(p, abuf, alen, (unsigned char **)&name, &len);
+      status = ares_expand_string(p, abuf, alen, &name.as_uchar, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t\t\t\t\t\t%s\n", name);
-      ares_free_string(name);
+      printf("\t\t\t\t\t\t%s\n", name.as_char);
+      ares_free_string(name.as_char);
       p += len;
 
-      status = ares_expand_string(p, abuf, alen, (unsigned char **)&name, &len);
+      status = ares_expand_string(p, abuf, alen, &name.as_uchar, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t\t\t\t\t\t%s\n", name);
-      ares_free_string(name);
+      printf("\t\t\t\t\t\t%s\n", name.as_char);
+      ares_free_string(name.as_char);
       p += len;
 
-      status = ares_expand_string(p, abuf, alen, (unsigned char **)&name, &len);
+      status = ares_expand_string(p, abuf, alen, &name.as_uchar, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t\t\t\t\t\t%s\n", name);
-      ares_free_string(name);
+      printf("\t\t\t\t\t\t%s\n", name.as_char);
+      ares_free_string(name.as_char);
       p += len;
 
-      status = ares_expand_string(p, abuf, alen, (unsigned char **)&name, &len);
+      status = ares_expand_string(p, abuf, alen, &name.as_uchar, &len);
       if (status != ARES_SUCCESS)
         return NULL;
-      printf("\t\t\t\t\t\t%s", name);
-      ares_free_string(name);
+      printf("\t\t\t\t\t\t%s", name.as_char);
+      ares_free_string(name.as_char);
       break;
 
 

ares/ahost.c

@@ -43,6 +43,21 @@
 #include "inet_net_pton.h"
 #include "ares_getopt.h"
 
+#ifndef HAVE_STRDUP
+#  include "ares_strdup.h"
+#  define strdup(ptr) ares_strdup(ptr)
+#endif
+
+#ifndef HAVE_STRCASECMP
+#  include "ares_strcasecmp.h"
+#  define strcasecmp(p1,p2) ares_strcasecmp(p1,p2)
+#endif
+
+#ifndef HAVE_STRNCASECMP
+#  include "ares_strcasecmp.h"
+#  define strncasecmp(p1,p2,n) ares_strncasecmp(p1,p2,n)
+#endif
+
 static void callback(void *arg, int status, int timeouts, struct hostent *host);
 static void usage(void);
 

ares/ares.h

@@ -114,6 +114,7 @@ extern "C" {
 #define ARES_OPT_SOCK_SNDBUF    (1 << 11)
 #define ARES_OPT_SOCK_RCVBUF    (1 << 12)
 #define ARES_OPT_TIMEOUTMS      (1 << 13)
+#define ARES_OPT_ROTATE         (1 << 14)
 
 /* Nameinfo flag values */
 #define ARES_NI_NOFQDN                  (1 << 0)
@@ -184,6 +185,7 @@ struct ares_options {
   int timeout; /* in seconds or milliseconds, depending on options */
   int tries;
   int ndots;
+  int rotate;
   unsigned short udp_port;
   unsigned short tcp_port;
   int socket_send_buffer_size;

ares/ares__get_hostent.c

@@ -18,11 +18,19 @@
 #include "setup.h"
 
 #if !defined(WIN32) || defined(WATT32)
+#ifdef HAVE_SYS_SOCKET_H
 #include <sys/socket.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
 #include <netinet/in.h>
-#include <arpa/inet.h>
+#endif
+#ifdef HAVE_NETDB_H
 #include <netdb.h>
 #endif
+#ifdef HAVE_ARPA_INET_H
+#include <arpa/inet.h>
+#endif
+#endif
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -30,8 +38,8 @@
 #include <ctype.h>
 
 #include "ares.h"
-#include "ares_private.h"
 #include "inet_net_pton.h"
+#include "ares_private.h"
 
 int ares__get_hostent(FILE *fp, int family, struct hostent **host)
 {

ares/ares_expand_name.c

@@ -17,14 +17,16 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
 #endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
+#endif
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#  include <arpa/nameser_compat.h>
 #endif
 
 #include <stdlib.h>

ares/ares_expand_string.c

@@ -17,11 +17,13 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
+#endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
 #else
-#include <netinet/in.h>
-#include <arpa/nameser.h>
+#  include "nameser.h"
 #endif
 
 #include <string.h>

ares/ares_gethostbyaddr.c

@@ -16,16 +16,25 @@
  */
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <arpa/nameser.h>
-#ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
+#ifdef HAVE_SYS_SOCKET_H
+#  include <sys/socket.h>
 #endif
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
+#endif
+#ifdef HAVE_NETDB_H
+#  include <netdb.h>
+#endif
+#ifdef HAVE_ARPA_INET_H
+#  include <arpa/inet.h>
+#endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
+#endif
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#  include <arpa/nameser_compat.h>
 #endif
 
 #include <stdio.h>
@@ -33,8 +42,8 @@
 #include <string.h>
 
 #include "ares.h"
-#include "ares_private.h"
 #include "inet_net_pton.h"
+#include "ares_private.h"
 
 #ifdef WATT32
 #undef WIN32

ares/ares_gethostbyname.c

@@ -17,19 +17,25 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <netdb.h>
+#ifdef HAVE_SYS_SOCKET_H
+#  include <sys/socket.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
+#endif
+#ifdef HAVE_NETDB_H
+#  include <netdb.h>
+#endif
+#ifdef HAVE_ARPA_INET_H
+#  include <arpa/inet.h>
+#endif
 #ifdef HAVE_ARPA_NAMESER_H
-#include <arpa/nameser.h>
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
 #endif
 #ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
-#endif
+#  include <arpa/nameser_compat.h>
 #endif
 
 #include <stdio.h>
@@ -41,9 +47,9 @@
 #endif
 
 #include "ares.h"
-#include "ares_private.h"
 #include "inet_net_pton.h"
 #include "bitncmp.h"
+#include "ares_private.h"
 
 #ifdef WATT32
 #undef WIN32

ares/ares_getnameinfo.c

@@ -16,17 +16,32 @@
  */
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
+#ifdef HAVE_GETSERVBYPORT_R
+#  if !defined(GETSERVBYPORT_R_ARGS) || \
+     (GETSERVBYPORT_R_ARGS < 4) || (GETSERVBYPORT_R_ARGS > 6)
+#    error "you MUST specifiy a valid number of arguments for getservbyport_r"
+#  endif
 #endif
+
+#ifdef HAVE_SYS_SOCKET_H
+#  include <sys/socket.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
+#endif
+#ifdef HAVE_NETDB_H
+#  include <netdb.h>
+#endif
+#ifdef HAVE_ARPA_INET_H
+#  include <arpa/inet.h>
+#endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
+#endif
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#  include <arpa/nameser_compat.h>
 #endif
 
 #ifdef HAVE_NET_IF_H
@@ -42,9 +57,9 @@
 #include <string.h>
 
 #include "ares.h"
-#include "ares_private.h"
 #include "ares_ipv6.h"
 #include "inet_ntop.h"
+#include "ares_private.h"
 
 #ifdef WATT32
 #undef WIN32

ares/ares_init.c

@@ -19,11 +19,10 @@
 #include "setup.h"
 
 #if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
 #include <iphlpapi.h>
 #include <malloc.h>
+#endif
 
-#else
 #ifdef HAVE_SYS_PARAM_H
 #include <sys/param.h>
 #endif
@@ -36,20 +35,30 @@
 #include <sys/socket.h>
 #endif
 
+#ifdef HAVE_NETINET_IN_H
 #include <netinet/in.h>
-#include <arpa/inet.h>
-#include <netdb.h>
-#include <arpa/nameser.h>
-#ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
 #endif
+
+#ifdef HAVE_NETDB_H
+#include <netdb.h>
+#endif
+
+#ifdef HAVE_ARPA_INET_H
+#include <arpa/inet.h>
+#endif
+
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
+#endif
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#  include <arpa/nameser_compat.h>
+#endif
+
 #ifdef HAVE_UNISTD_H
 #include <unistd.h>
 #endif
-#ifdef HAVE_PROCESS_H
-#include <process.h>  /* Some have getpid() here */
-#endif
-#endif
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -58,8 +67,8 @@
 #include <time.h>
 #include <errno.h>
 #include "ares.h"
-#include "ares_private.h"
 #include "inet_net_pton.h"
+#include "ares_private.h"
 
 #ifdef WATT32
 #undef WIN32  /* Redefined in MingW/MSVC headers */
@@ -135,6 +144,7 @@ int ares_init_options(ares_channel *channelptr, struct ares_options *options,
   channel->timeout = -1;
   channel->tries = -1;
   channel->ndots = -1;
+  channel->rotate = -1;
   channel->udp_port = -1;
   channel->tcp_port = -1;
   channel->socket_send_buffer_size = -1;
@@ -150,6 +160,7 @@ int ares_init_options(ares_channel *channelptr, struct ares_options *options,
   channel->sock_state_cb = NULL;
   channel->sock_state_cb_data = NULL;
 
+  channel->last_server = 0;
   channel->last_timeout_processed = (time_t)now.tv_sec;
 
   /* Initialize our lists of queries */
@@ -343,6 +354,8 @@ static int init_by_options(ares_channel channel,
     channel->tries = options->tries;
   if ((optmask & ARES_OPT_NDOTS) && channel->ndots == -1)
     channel->ndots = options->ndots;
+  if ((optmask & ARES_OPT_ROTATE) && channel->rotate == -1)
+    channel->rotate = options->rotate;
   if ((optmask & ARES_OPT_UDP_PORT) && channel->udp_port == -1)
     channel->udp_port = options->udp_port;
   if ((optmask & ARES_OPT_TCP_PORT) && channel->tcp_port == -1)
@@ -675,7 +688,7 @@ DhcpNameServer
       {
         if (bytes)
         {
-          line = (char *)malloc(bytes+1);
+          line = malloc(bytes+1);
           if (RegQueryValueEx(mykey, NAMESERVER, NULL, &data_type,
                               (unsigned char *)line, &bytes) ==
               ERROR_SUCCESS)
@@ -923,6 +936,8 @@ static int init_by_defaults(ares_channel channel)
     channel->tries = DEFAULT_TRIES;
   if (channel->ndots == -1)
     channel->ndots = 1;
+  if (channel->rotate == -1)
+    channel->rotate = 0;
   if (channel->udp_port == -1)
     channel->udp_port = htons(NAMESERVER_PORT);
   if (channel->tcp_port == -1)
@@ -952,7 +967,7 @@ static int init_by_defaults(ares_channel channel)
     size_t len = 64;
     int res;
 
-    hostname = (char *)malloc(len);
+    hostname = malloc(len);
     if(!hostname) {
       rc = ARES_ENOMEM;
       goto error;
@@ -1293,6 +1308,9 @@ static int set_options(ares_channel channel, const char *str)
       val = try_option(p, q, "retry:");
       if (val && channel->tries == -1)
         channel->tries = atoi(val);
+      val = try_option(p, q, "rotate");
+      if (val && channel->rotate == -1)
+        channel->rotate = 1;
       p = q;
       while (ISSPACE(*p))
         p++;
@@ -1365,7 +1383,7 @@ static char *try_config(char *s, const char *opt)
 static const char *try_option(const char *p, const char *q, const char *opt)
 {
   size_t len = strlen(opt);
-  return ((size_t)(q - p) > len && !strncmp(p, opt, len)) ? &p[len] : NULL;
+  return ((size_t)(q - p) >= len && !strncmp(p, opt, len)) ? &p[len] : NULL;
 }
 
 #ifndef WIN32

ares/ares_mkquery.c

@@ -17,14 +17,16 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
 #endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
+#endif
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#  include <arpa/nameser_compat.h>
 #endif
 
 #include <stdlib.h>

ares/ares_parse_a_reply.c

@@ -17,20 +17,29 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
+#ifdef HAVE_SYS_SOCKET_H
+#  include <sys/socket.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
+#endif
+#ifdef HAVE_NETDB_H
+#  include <netdb.h>
+#endif
+#ifdef HAVE_ARPA_INET_H
+#  include <arpa/inet.h>
+#endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
 #else
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <netdb.h>
-#include <arpa/nameser.h>
+#  include "nameser.h"
+#endif
 #ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
-#endif
+#  include <arpa/nameser_compat.h>
 #endif
+
 #ifdef HAVE_STRINGS_H
-#include <strings.h>
+#  include <strings.h>
 #endif
 
 #include <stdlib.h>

ares/ares_parse_aaaa_reply.c

@@ -17,22 +17,29 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <netdb.h>
+#ifdef HAVE_SYS_SOCKET_H
+#  include <sys/socket.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
+#endif
+#ifdef HAVE_NETDB_H
+#  include <netdb.h>
+#endif
+#ifdef HAVE_ARPA_INET_H
+#  include <arpa/inet.h>
+#endif
 #ifdef HAVE_ARPA_NAMESER_H
-#include <arpa/nameser.h>
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
 #endif
 #ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
-#endif
+#  include <arpa/nameser_compat.h>
 #endif
+
 #ifdef HAVE_STRINGS_H
-#include <strings.h>
+#  include <strings.h>
 #endif
 
 #include <stdlib.h>

ares/ares_parse_ns_reply.c

@@ -20,17 +20,25 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <netdb.h>
-#include <arpa/nameser.h>
-#ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
+#ifdef HAVE_SYS_SOCKET_H
+#  include <sys/socket.h>
 #endif
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
+#endif
+#ifdef HAVE_NETDB_H
+#  include <netdb.h>
+#endif
+#ifdef HAVE_ARPA_INET_H
+#  include <arpa/inet.h>
+#endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
+#endif
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#  include <arpa/nameser_compat.h>
 #endif
 
 #include <stdlib.h>

ares/ares_parse_ptr_reply.c

@@ -17,19 +17,26 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
+#ifdef HAVE_SYS_SOCKET_H
+#  include <sys/socket.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
+#endif
+#ifdef HAVE_NETDB_H
+#  include <netdb.h>
+#endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
 #else
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <arpa/nameser.h>
+#  include "nameser.h"
+#endif
 #ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
-#endif
+#  include <arpa/nameser_compat.h>
 #endif
+
 #ifdef HAVE_STRINGS_H
-#include <strings.h>
+#  include <strings.h>
 #endif
 
 #include <stdlib.h>
@@ -77,7 +84,7 @@ int ares_parse_ptr_reply(const unsigned char *abuf, int alen, const void *addr,
 
   /* Examine each answer resource record (RR) in turn. */
   hostname = NULL;
-  aliases = (char **) malloc(8 * sizeof(char *));
+  aliases = malloc(8 * sizeof(char *));
   if (!aliases)
     {
       free(ptrname);
@@ -119,7 +126,7 @@ int ares_parse_ptr_reply(const unsigned char *abuf, int alen, const void *addr,
           strncpy(aliases[aliascnt], rr_data, strlen(rr_data)+1);
           aliascnt++;
           if ((aliascnt%8)==0)
-            aliases = (char **) realloc(aliases, (aliascnt/16+1) * sizeof(char *));
+            aliases = realloc(aliases, (aliascnt/16+1) * sizeof(char *));
         }
 
       if (rr_class == C_IN && rr_type == T_CNAME)

ares/ares_private.h

@@ -43,6 +43,7 @@
 #undef  closesocket
 #define closesocket(s)    close_s(s)
 #define writev(s,v,c)     writev_s(s,v,c)
+#define HAVE_WRITEV 1
 #endif
 
 #ifdef NETWARE
@@ -94,6 +95,26 @@
 #include "ares_ipv6.h"
 #include "ares_llist.h"
 
+#ifndef HAVE_STRDUP
+#  include "ares_strdup.h"
+#  define strdup(ptr) ares_strdup(ptr)
+#endif
+
+#ifndef HAVE_STRCASECMP
+#  include "ares_strcasecmp.h"
+#  define strcasecmp(p1,p2) ares_strcasecmp(p1,p2)
+#endif
+
+#ifndef HAVE_STRNCASECMP
+#  include "ares_strcasecmp.h"
+#  define strncasecmp(p1,p2,n) ares_strncasecmp(p1,p2,n)
+#endif
+
+#ifndef HAVE_WRITEV
+#  include "ares_writev.h"
+#  define writev(s,ptr,cnt) ares_writev(s,ptr,cnt)
+#endif
+
 struct query;
 
 struct send_request {
@@ -174,8 +195,8 @@ struct query {
   void *arg;
 
   /* Query status */
-  int try;
-  int server;
+  int try; /* Number of times we tried this query already. */
+  int server; /* Server this query has last been sent to. */
   struct query_server_info *server_info;   /* per-server state */
   int using_tcp;
   int error_status;
@@ -221,6 +242,7 @@ struct ares_channeldata {
   int timeout; /* in milliseconds */
   int tries;
   int ndots;
+  int rotate; /* if true, all servers specified are used */
   int udp_port;
   int tcp_port;
   int socket_send_buffer_size;
@@ -247,6 +269,9 @@ struct ares_channeldata {
      just to draw the line somewhere. */
   time_t last_timeout_processed;
 
+  /* Last server we sent a query to. */
+  int last_server;
+
   /* Circular, doubly-linked list of queries, bucketed various ways.... */
   /* All active queries in a single list: */
   struct list_node all_queries;

ares/ares_process.c

@@ -18,47 +18,45 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-
-#else
 #ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
+#  include <sys/socket.h>
 #endif
 #ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
+#  include <sys/uio.h>
 #endif
 #ifdef HAVE_NETINET_IN_H
-#include <netinet/in.h> /* <netinet/tcp.h> may need it */
+#  include <netinet/in.h>
 #endif
 #ifdef HAVE_NETINET_TCP_H
-#include <netinet/tcp.h> /* for TCP_NODELAY */
+#  include <netinet/tcp.h>
 #endif
 #ifdef HAVE_NETDB_H
-#include <netdb.h>
+#  include <netdb.h>
 #endif
 #ifdef HAVE_ARPA_NAMESER_H
-#include <arpa/nameser.h>
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
 #endif
 #ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
+#  include <arpa/nameser_compat.h>
 #endif
+
 #ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
+#  include <sys/time.h>
 #endif
-#endif /* WIN32 && !WATT32 */
 
 #ifdef HAVE_STRINGS_H
-#include <strings.h>
+#  include <strings.h>
 #endif
 #ifdef HAVE_UNISTD_H
-#include <unistd.h>
+#  include <unistd.h>
 #endif
 #ifdef HAVE_SYS_IOCTL_H
-#include <sys/ioctl.h>
+#  include <sys/ioctl.h>
 #endif
 #ifdef NETWARE
-#include <sys/filio.h>
+#  include <sys/filio.h>
 #endif
 
 #include <assert.h>
@@ -672,30 +670,33 @@ static void skip_server(ares_channel channel, struct query *query,
 static void next_server(ares_channel channel, struct query *query,
                         struct timeval *now)
 {
-  /* Advance to the next server or try. */
-  query->server++;
-  for (; query->try < channel->tries; query->try++)
+  /* We need to try each server channel->tries times. We have channel->nservers
+   * servers to try. In total, we need to do channel->nservers * channel->tries
+   * attempts. Use query->try to remember how many times we already attempted
+   * this query. Use modular arithmetic to find the next server to try. */
+  while (++(query->try) < (channel->nservers * channel->tries))
     {
-      for (; query->server < channel->nservers; query->server++)
+      struct server_state *server;
+
+      /* Move on to the next server. */
+      query->server = (query->server + 1) % channel->nservers;
+      server = &channel->servers[query->server];
+
+      /* We don't want to use this server if (1) we decided this
+       * connection is broken, and thus about to be closed, (2)
+       * we've decided to skip this server because of earlier
+       * errors we encountered, or (3) we already sent this query
+       * over this exact connection.
+       */
+      if (!server->is_broken &&
+           !query->server_info[query->server].skip_server &&
+           !(query->using_tcp &&
+             (query->server_info[query->server].tcp_connection_generation ==
+              server->tcp_connection_generation)))
         {
-          struct server_state *server = &channel->servers[query->server];
-          /* We don't want to use this server if (1) we decided this
-           * connection is broken, and thus about to be closed, (2)
-           * we've decided to skip this server because of earlier
-           * errors we encountered, or (3) we already sent this query
-           * over this exact connection.
-           */
-          if (!server->is_broken &&
-               !query->server_info[query->server].skip_server &&
-               !(query->using_tcp &&
-                 (query->server_info[query->server].tcp_connection_generation ==
-                  server->tcp_connection_generation)))
-            {
-               ares__send_query(channel, query, now);
-               return;
-            }
+           ares__send_query(channel, query, now);
+           return;
         }
-      query->server = 0;
 
       /* You might think that with TCP we only need one try. However,
        * even when using TCP, servers can time-out our connection just
@@ -704,6 +705,8 @@ static void next_server(ares_channel channel, struct query *query,
        * tickle a bug that drops our request.
        */
     }
+
+  /* If we are here, all attempts to perform query failed. */
   end_query(channel, query, query->error_status, NULL, 0);
 }
 
@@ -777,8 +780,7 @@ void ares__send_query(ares_channel channel, struct query *query,
     }
     query->timeout = *now;
     ares__timeadd(&query->timeout,
-                  (query->try == 0) ? channel->timeout
-                  : channel->timeout << query->try / channel->nservers);
+                  channel->timeout << (query->try / channel->nservers));
     /* Keep track of queries bucketed by timeout, so we can process
      * timeout events quickly.
      */
@@ -908,7 +910,7 @@ static int open_tcp_socket(ares_channel channel, struct server_state *server)
   /* Configure it. */
   if (configure_socket(s, channel) < 0)
     {
-       close(s);
+       closesocket(s);
        return -1;
     }
 
@@ -922,7 +924,7 @@ static int open_tcp_socket(ares_channel channel, struct server_state *server)
   if (setsockopt(s, IPPROTO_TCP, TCP_NODELAY,
                  (void *)&opt, sizeof(opt)) == -1)
     {
-       close(s);
+       closesocket(s);
        return -1;
     }
 
@@ -931,14 +933,16 @@ static int open_tcp_socket(ares_channel channel, struct server_state *server)
   sockin.sin_family = AF_INET;
   sockin.sin_addr = server->addr;
   sockin.sin_port = (unsigned short)(channel->tcp_port & 0xffff);
-  if (connect(s, (struct sockaddr *) &sockin, sizeof(sockin)) == -1) {
-    int err = SOCKERRNO;
+  if (connect(s, (struct sockaddr *) &sockin, sizeof(sockin)) == -1)
+    {
+      int err = SOCKERRNO;
 
-    if (err != EINPROGRESS && err != EWOULDBLOCK) {
-      closesocket(s);
-      return -1;
+      if (err != EINPROGRESS && err != EWOULDBLOCK)
+        {
+          closesocket(s);
+          return -1;
+        }
     }
-  }
 
   SOCK_STATE_CALLBACK(channel, s, 1, 0);
   server->tcp_buffer_pos = 0;
@@ -960,7 +964,7 @@ static int open_udp_socket(ares_channel channel, struct server_state *server)
   /* Set the socket non-blocking. */
   if (configure_socket(s, channel) < 0)
     {
-       close(s);
+       closesocket(s);
        return -1;
     }
 
@@ -971,8 +975,13 @@ static int open_udp_socket(ares_channel channel, struct server_state *server)
   sockin.sin_port = (unsigned short)(channel->udp_port & 0xffff);
   if (connect(s, (struct sockaddr *) &sockin, sizeof(sockin)) == -1)
     {
-      closesocket(s);
-      return -1;
+      int err = SOCKERRNO;
+
+      if (err != EINPROGRESS && err != EWOULDBLOCK)
+        {
+          closesocket(s);
+          return -1;
+        }
     }
 
   SOCK_STATE_CALLBACK(channel, s, 1, 0);

ares/ares_query.c

@@ -17,14 +17,16 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
 #endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
+#endif
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#  include <arpa/nameser_compat.h>
 #endif
 
 #include <stdlib.h>

ares/ares_search.c

@@ -16,14 +16,15 @@
  */
 
 #include "setup.h"
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <ctype.h>
 #include <errno.h>
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
+#ifdef HAVE_STRINGS_H
+#  include <strings.h>
 #endif
 
 #include "ares.h"

ares/ares_send.c

@@ -17,14 +17,16 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#ifdef HAVE_ARPA_NAMESER_COMPAT_H
-#include <arpa/nameser_compat.h>
+#ifdef HAVE_NETINET_IN_H
+#  include <netinet/in.h>
 #endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
+#endif
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#  include <arpa/nameser_compat.h>
 #endif
 
 #include <stdlib.h>
@@ -93,7 +95,13 @@ void ares_send(ares_channel channel, const unsigned char *qbuf, int qlen,
 
   /* Initialize query status. */
   query->try = 0;
-  query->server = 0;
+
+  /* Choose the server to send the query to. If rotation is enabled, keep track
+   * of the next server we want to use. */
+  query->server = channel->last_server;
+  if (channel->rotate == 1)
+    channel->last_server = (channel->last_server + 1) % channel->nservers;
+
   for (i = 0; i < channel->nservers; i++)
     {
       query->server_info[i].skip_server = 0;

ares/ares_strcasecmp.c

@@ -0,0 +1,67 @@
+
+/* $Id$ */
+
+/* Copyright 1998 by the Massachusetts Institute of Technology.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#include "setup.h"
+#include "ares_strcasecmp.h"
+
+#ifndef HAVE_STRCASECMP
+int ares_strcasecmp(const char *a, const char *b)
+{
+#if defined(HAVE_STRCMPI)
+  return strcmpi(a, b);
+#elif defined(HAVE_STRICMP)
+  return stricmp(a, b);
+#else
+  size_t i;
+
+  for (i = 0; i < (size_t)-1; i++) {
+    int c1 = ISUPPER(a[i]) ? tolower(a[i]) : a[i];
+    int c2 = ISUPPER(b[i]) ? tolower(b[i]) : b[i];
+    if (c1 != c2)
+      return c1-c2;
+    if (!c1)
+      break;
+  }
+  return 0;
+#endif
+}
+#endif
+
+#ifndef HAVE_STRNCASECMP
+int ares_strncasecmp(const char *a, const char *b, size_t n)
+{
+#if defined(HAVE_STRNCMPI)
+  return strncmpi(a, b, n);
+#elif defined(HAVE_STRNICMP)
+  return strnicmp(a, b, n);
+#else
+  size_t i;
+
+  for (i = 0; i < n; i++) {
+    int c1 = ISUPPER(a[i]) ? tolower(a[i]) : a[i];
+    int c2 = ISUPPER(b[i]) ? tolower(b[i]) : b[i];
+    if (c1 != c2)
+      return c1-c2;
+    if (!c1)
+      break;
+  }
+  return 0;
+#endif
+}
+#endif
+

ares/ares_strcasecmp.h

@@ -0,0 +1,31 @@
+#ifndef HEADER_CARES_STRCASECMP_H
+#define HEADER_CARES_STRCASECMP_H
+
+/* $Id$ */
+
+/* Copyright 1998 by the Massachusetts Institute of Technology.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#include "setup.h"
+
+#ifndef HAVE_STRCASECMP
+extern int ares_strcasecmp(const char *a, const char *b);
+#endif
+
+#ifndef HAVE_STRNCASECMP
+extern int ares_strncasecmp(const char *a, const char *b, size_t n);
+#endif
+
+#endif /* HEADER_CARES_STRCASECMP_H */

ares/ares_strdup.c

@@ -0,0 +1,43 @@
+
+/* $Id$ */
+
+/* Copyright 1998 by the Massachusetts Institute of Technology.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#include "setup.h"
+#include "ares_strdup.h"
+
+#ifndef HAVE_STRDUP
+char *ares_strdup(const char *s1)
+{
+  size_t sz;
+  char * s2;
+
+  if(s1) {
+    sz = strlen(s1);
+    if(sz < (size_t)-1) {
+      sz++;
+      if(sz < ((size_t)-1) / sizeof(char)) {
+        s2 = malloc(sz * sizeof(char));
+        if(s2) {
+          memcpy(s2, s1, sz * sizeof(char));
+          return s2;
+        }
+      }
+    }
+  }
+  return (char *)NULL;
+}
+#endif

ares/ares_strdup.h

@@ -0,0 +1,27 @@
+#ifndef HEADER_CARES_STRDUP_H
+#define HEADER_CARES_STRDUP_H
+
+/* $Id$ */
+
+/* Copyright 1998 by the Massachusetts Institute of Technology.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#include "setup.h"
+
+#ifndef HAVE_STRDUP
+extern char *ares_strdup(const char *s1);
+#endif
+
+#endif /* HEADER_CARES_STRDUP_H */

ares/ares_writev.c

@@ -0,0 +1,77 @@
+
+/* $Id$ */
+
+/* Copyright 1998 by the Massachusetts Institute of Technology.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#include "setup.h"
+
+#include <limits.h>
+#include "ares.h"
+#include "ares_private.h"
+
+#ifndef HAVE_WRITEV
+ssize_t ares_writev(ares_socket_t s, const struct iovec *iov, int iovcnt)
+{
+  char *buffer, *bp;
+  int i;
+  size_t bytes = 0;
+  ssize_t result;
+
+  /* Validate iovcnt */
+  if (iovcnt <= 0)
+  {
+    SET_ERRNO(EINVAL);
+    return (-1);
+  }
+
+  /* Validate and find the sum of the iov_len values in the iov array */
+  for (i = 0; i < iovcnt; i++)
+  {
+    if (iov[i].iov_len > INT_MAX - bytes)
+    {
+      SET_ERRNO(EINVAL);
+      return (-1);
+    }
+    bytes += iov[i].iov_len;
+  }
+
+  if (bytes == 0)
+    return (0);
+
+  /* Allocate a temporary buffer to hold the data */
+  buffer = malloc(bytes);
+  if (!buffer)
+  {
+    SET_ERRNO(ENOMEM);
+    return (-1);
+  }
+
+  /* Copy the data into buffer */
+  for (bp = buffer, i = 0; i < iovcnt; ++i)
+  {
+    memcpy (bp, iov[i].iov_base, iov[i].iov_len);
+    bp += iov[i].iov_len;
+  }
+
+  /* Send buffer contents */
+  result = swrite(s, buffer, bytes);
+
+  free(buffer);
+
+  return (result);
+}
+#endif
+

ares/ares_writev.h

@@ -0,0 +1,37 @@
+#ifndef HEADER_CARES_WRITEV_H
+#define HEADER_CARES_WRITEV_H
+
+/* $Id$ */
+
+/* Copyright 1998 by the Massachusetts Institute of Technology.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#include "setup.h"
+#include "ares.h"
+
+#ifndef HAVE_WRITEV
+
+/* Structure for scatter/gather I/O. */
+struct iovec
+{
+  void *iov_base;  /* Pointer to data. */
+  size_t iov_len;  /* Length of data.  */
+};
+
+extern ssize_t ares_writev(ares_socket_t s, const struct iovec *iov, int iovcnt);
+
+#endif
+
+#endif /* HEADER_CARES_WRITEV_H */

ares/config-win32.h

@@ -79,6 +79,21 @@
 /* Define if you have the ioctlsocket function.  */
 #define HAVE_IOCTLSOCKET 1
 
+/* Define if you have the strcasecmp function. */
+/* #define HAVE_STRCASECMP 1 */
+
+/* Define if you have the strdup function. */
+#define HAVE_STRDUP 1
+
+/* Define if you have the stricmp function. */
+#define HAVE_STRICMP 1
+
+/* Define if you have the strncasecmp function. */
+/* #define HAVE_STRNCASECMP 1 */
+
+/* Define if you have the strnicmp function. */
+#define HAVE_STRNICMP 1
+
 /* Define if you have the recv function. */
 #define HAVE_RECV 1
 
@@ -207,6 +222,20 @@
 #  endif
 #endif
 
+/* Availability of freeaddrinfo, getaddrinfo and getnameinfo functions is quite */
+/* convoluted, compiler dependant and in some cases even build target dependat. */
+#if defined(HAVE_WS2TCPIP_H)
+#  if defined(_WIN32_WINNT) && (_WIN32_WINNT >= 0x0501)
+#    define HAVE_FREEADDRINFO 1
+#    define HAVE_GETADDRINFO  1
+#    define HAVE_GETNAMEINFO  1
+#  elif defined(_MSC_VER) && (_MSC_VER >= 1200)
+#    define HAVE_FREEADDRINFO 1
+#    define HAVE_GETADDRINFO  1
+#    define HAVE_GETNAMEINFO  1
+#  endif
+#endif
+
 /* ---------------------------------------------------------------- */
 /*                         IPV6 COMPATIBILITY                       */
 /* ---------------------------------------------------------------- */

ares/configure.ac

@@ -8,6 +8,10 @@ AC_CONFIG_SRCDIR([ares_ipv6.h])
 AM_CONFIG_HEADER([config.h])
 AM_MAINTAINER_MODE
 
+CARES_CHECK_OPTION_DEBUG
+CARES_CHECK_OPTION_OPTIMIZE
+CARES_CHECK_OPTION_WARNINGS
+
 dnl SED is mandatory for configure process and libtool.
 dnl Set it now, allowing it to be changed later.
 AC_PATH_PROG([SED], [sed], [not_found],
@@ -64,7 +68,7 @@ AC_CANONICAL_HOST
 dnl Get system canonical name
 AC_DEFINE_UNQUOTED(OS, "${host}", [cpu-machine-OS])
 
-AC_PROG_CC
+CARES_CHECK_PROG_CC
 AM_PROG_CC_C_O
 AC_PROG_INSTALL
 
@@ -86,43 +90,10 @@ esac
 dnl support building of Windows DLLs
 AC_LIBTOOL_WIN32_DLL
 
-dnl ************************************************************
-dnl Option to switch on debug options. This makes an assumption that
-dnl this is built as an 'ares' subdir in the curl source tree. Subject for
-dnl improval in the future!
-dnl
-AC_MSG_CHECKING([whether to enable debug options])
-AC_ARG_ENABLE(debug,
-AC_HELP_STRING([--enable-debug],[Enable pedantic debug options])
-AC_HELP_STRING([--disable-debug],[Disable debug options]),
-[ case "$enableval" in
-  no)
-       AC_MSG_RESULT(no)
-       ;;
-  *)   AC_MSG_RESULT(yes)
+CARES_PROCESS_DEBUG_BUILD_OPTS
 
-    dnl when doing the debug stuff, use static library only
-    AC_DISABLE_SHARED
-
-    debugbuild="yes"
-
-    dnl the entire --enable-debug is a hack that lives and runs on top of
-    dnl libcurl stuff so this BUILDING_LIBCURL is not THAT much uglier
-    AC_DEFINE(BUILDING_LIBCURL, 1, [when building as static part of libcurl])
-
-    CPPFLAGS="$CPPFLAGS -DCURLDEBUG -I$srcdir/../include"
-    CFLAGS="$CFLAGS -g" 
-
-    dnl set compiler "debug" options to become more picky, and remove
-    dnl optimize options from CFLAGS
-    CURL_CC_DEBUG_OPTS
-
-       ;;
-  esac ],
-       AC_MSG_RESULT(no)
-)
-AM_CONDITIONAL(DEBUGBUILD, test x$debugbuild = xyes)
-AM_CONDITIONAL(CURLDEBUG, test x$debugbuild = xyes)
+AM_CONDITIONAL(DEBUGBUILD, test x$want_debug = xyes)
+AM_CONDITIONAL(CURLDEBUG, test x$want_debug = xyes)
 
 dnl skip libtool C++ and Fortran compiler checks
 m4_ifdef([AC_PROG_CXX], [m4_undefine([AC_PROG_CXX])])
@@ -140,10 +111,10 @@ m4_defun([AC_LIBTOOL_CXXCPP],[true])
 m4_ifdef([AC_LIBTOOL_F77], [m4_undefine([AC_LIBTOOL_F77])])
 m4_defun([AC_LIBTOOL_F77],[])
 
-dnl force libtool to build static libraries with PIC on AMD64-linux
-AC_MSG_CHECKING([if arch-OS host is AMD64-linux (to build static libraries with PIC)])
+dnl force libtool to build static libraries with PIC on AMD64-Linux & FreeBSD
+AC_MSG_CHECKING([if arch-OS host is AMD64-Linux/FreeBSD (to build static libraries with PIC)])
 case $host in
-  x86_64*linux*)
+  x86_64*linux*|amd64*freebsd*|ia64*freebsd*)
     AC_MSG_RESULT([yes])
     with_pic=yes
     ;;
@@ -167,41 +138,29 @@ esac
 AC_MSG_RESULT($need_no_undefined)
 AM_CONDITIONAL(NO_UNDEFINED, test x$need_no_undefined = xyes)
 
-dnl **********************************************************************
-dnl check if this is the Intel ICC compiler, and if so make it stricter
-dnl (convert warning 147 into an error) so that it properly can detect the
-dnl gethostbyname_r() version
-dnl **********************************************************************
-CURL_DETECT_ICC([CFLAGS="$CFLAGS -we 147"])
-
 dnl **********************************************************************
 dnl platform/compiler/architecture specific checks/flags
 dnl **********************************************************************
 
+CARES_CHECK_COMPILER
+CARES_SET_COMPILER_BASIC_OPTS
+CARES_SET_COMPILER_DEBUG_OPTS
+CARES_SET_COMPILER_OPTIMIZE_OPTS
+CARES_SET_COMPILER_WARNING_OPTS
+
 case $host in
   #
-  x86_64*linux*)
+  x86_64*linux*|amd64*freebsd*|ia64*freebsd*)
     #
-    dnl find out if icc is being used
-    if test "z$ICC" = "z"; then
-      CURL_DETECT_ICC
-    fi
-    #
-    if test "$ICC" = "yes"; then
-      dnl figure out icc version
-      AC_MSG_CHECKING([icc version])
-      iccver=`$CC -dumpversion`
-      iccnhi=`echo $iccver | cut -d . -f1`
-      iccnlo=`echo $iccver | cut -d . -f2`
-      iccnum=`(expr $iccnhi "*" 100 + $iccnlo) 2>/dev/null`
-      AC_MSG_RESULT($iccver)
+    if test "$compiler_id" = "INTEL_UNIX_C"; then
       #
-      if test "$iccnum" -ge "900" && test "$iccnum" -lt "1000"; then
+      if test "$compiler_num" -ge "900" &&
+        test "$compiler_num" -lt "1000"; then
         dnl icc 9.X specific
         CFLAGS="$CFLAGS -i-dynamic"
       fi
       #
-      if test "$iccnum" -ge "1000"; then
+      if test "$compiler_num" -ge "1000"; then
         dnl icc 10.X or later
         CFLAGS="$CFLAGS -shared-intel"
       fi
@@ -211,44 +170,6 @@ case $host in
   #
 esac
 
-AC_MSG_CHECKING([whether we are using the IBM C compiler])
-CURL_CHECK_DEF([__IBMC__], [], [silent])
-if test "$curl_cv_have_def___IBMC__" = "yes"; then
-  AC_MSG_RESULT([yes])
-  dnl Ensure that compiler optimizations are always thread-safe.
-  CFLAGS="$CFLAGS -qthreaded"
-  dnl Disable type based strict aliasing optimizations, using worst
-  dnl case aliasing assumptions when compiling. Type based aliasing
-  dnl would restrict the lvalues that could be safely used to access
-  dnl a data object.
-  CFLAGS="$CFLAGS -qnoansialias"
-  dnl Force compiler to stop after the compilation phase, without
-  dnl generating an object code file when compilation has errors.
-  CFLAGS="$CFLAGS -qhalt=e"
-else
-  AC_MSG_RESULT([no])
-fi
-
-AC_MSG_CHECKING([whether we are using the DEC/Compaq C compiler])
-CURL_CHECK_DEF([__DECC], [], [silent])
-CURL_CHECK_DEF([__DECC_VER], [], [silent])
-if test "$curl_cv_have_def___DECC" = "yes" &&
-  test "$curl_cv_have_def___DECC_VER" = "yes"; then
-  AC_MSG_RESULT([yes])
-  dnl Select strict ANSI C compiler mode
-  CFLAGS="$CFLAGS -std1"
-  dnl Turn off optimizer ANSI C aliasing rules
-  CFLAGS="$CFLAGS -noansi_alias"
-  dnl Select a higher warning level than default level2
-  CFLAGS="$CFLAGS -msg_enable level3"
-  dnl Generate warnings for missing function prototypes
-  CFLAGS="$CFLAGS -warnprotos"
-  dnl Change some warnings into fatal errors
-  CFLAGS="$CFLAGS -msg_fatal toofewargs,toomanyargs"
-else
-  AC_MSG_RESULT([no])
-fi
-
 CURL_CHECK_COMPILER_HALT_ON_ERROR
 CURL_CHECK_COMPILER_ARRAY_SIZE_NEGATIVE
 
@@ -436,6 +357,7 @@ if test "$ac_cv_lib_resolve_strcasecmp" = "$ac_cv_func_strcasecmp"; then
                ,
                -lnsl)
 fi
+ac_cv_func_strcasecmp="no"
 
 dnl socket lib?
 AC_CHECK_FUNC(connect, , [ AC_CHECK_LIB(socket, connect) ])
@@ -531,6 +453,7 @@ AC_CHECK_HEADERS(
        sys/socket.h \
        sys/ioctl.h \
        sys/param.h \
+       sys/uio.h \
        netdb.h \
        netinet/in.h \
        netinet/tcp.h \
@@ -630,6 +553,22 @@ CURL_CHECK_FUNC_RECVFROM
 CURL_CHECK_FUNC_SEND
 CURL_CHECK_MSG_NOSIGNAL
 
+CARES_CHECK_FUNC_FREEADDRINFO
+CARES_CHECK_FUNC_GETADDRINFO
+CARES_CHECK_FUNC_GETHOSTNAME
+CARES_CHECK_FUNC_GETSERVBYPORT_R
+CARES_CHECK_FUNC_INET_NTOP
+CARES_CHECK_FUNC_INET_PTON
+CARES_CHECK_FUNC_STRCASECMP
+CARES_CHECK_FUNC_STRCMPI
+CARES_CHECK_FUNC_STRDUP
+CARES_CHECK_FUNC_STRICMP
+CARES_CHECK_FUNC_STRNCASECMP
+CARES_CHECK_FUNC_STRNCMPI
+CARES_CHECK_FUNC_STRNICMP
+CARES_CHECK_FUNC_WRITEV
+
+
 dnl check for AF_INET6
 CARES_CHECK_CONSTANT(
   [
@@ -819,35 +758,6 @@ AC_CHECK_FUNCS([bitncmp \
 ])
 
 
-dnl check for inet_pton
-AC_CHECK_FUNCS(inet_pton)
-dnl Some systems have it, but not IPv6
-if test "$ac_cv_func_inet_pton" = "yes" ; then
-AC_MSG_CHECKING(if inet_pton supports IPv6)
-AC_TRY_RUN(
-  [
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#ifdef HAVE_NETINET_IN_H
-#include <netinet/in.h>
-#endif
-int main()
-  {
-    struct in6_addr addr6;
-    if (inet_pton(AF_INET6, "::1", &addr6) < 1)
-      exit(1);
-    else
-      exit(0);
-  }
-  ], [
-       AC_MSG_RESULT(yes)
-       AC_DEFINE_UNQUOTED(HAVE_INET_PTON_IPV6,1,[Define to 1 if inet_pton supports IPv6.])
-     ], AC_MSG_RESULT(no),AC_MSG_RESULT(no))
-fi
 dnl Check for inet_net_pton
 AC_CHECK_FUNCS(inet_net_pton)
 dnl Again, some systems have it, but not IPv6
@@ -879,39 +789,6 @@ int main()
 fi
 
 
-dnl Check for inet_ntop
-AC_CHECK_FUNCS(inet_ntop)
-dnl Again, some systems have it, but not IPv6
-if test "$ac_cv_func_inet_ntop" = "yes" ; then
-AC_MSG_CHECKING(if inet_ntop supports IPv6)
-AC_TRY_RUN(
-  [
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#ifdef HAVE_NETINET_IN_H
-#include <netinet/in.h>
-#endif
-#include <errno.h>
-int main()
-  {
-    struct in6_addr addr6;
-    char buf[128];
-    if (inet_ntop(AF_INET6, &addr6, buf, 128) == 0 && errno == EAFNOSUPPORT)
-      exit(1);
-    else
-      exit(0);
-  }
-  ], [
-       AC_MSG_RESULT(yes)
-       AC_DEFINE_UNQUOTED(HAVE_INET_NTOP_IPV6,1,
-          [Define to 1 if inet_ntop supports IPv6.])
-     ], AC_MSG_RESULT(no),AC_MSG_RESULT(no))
-fi
-
 AC_CHECK_SIZEOF(struct in6_addr, ,
 [
 #undef inline
@@ -974,10 +851,6 @@ dnl and get the types of five of its arguments.
 CURL_CHECK_FUNC_GETNAMEINFO
 
 
-dnl God bless non-standardized functions! We need to see which getservbyport_r
-dnl variant is available
-CARES_CHECK_GETSERVBYPORT_R
-
 CURL_CHECK_NONBLOCKING_SOCKET
 
 AC_C_BIGENDIAN(
@@ -1013,5 +886,15 @@ fi
 CARES_PRIVATE_LIBS="$LIBS"
 AC_SUBST(CARES_PRIVATE_LIBS)
 
+dnl squeeze whitespace out of some variables
+
+squeeze CFLAGS
+squeeze CPPFLAGS
+squeeze DEFS
+squeeze LDFLAGS
+squeeze LIBS
+
+squeeze CARES_PRIVATE_LIBS
+
 AC_CONFIG_FILES([Makefile libcares.pc])
 AC_OUTPUT

ares/inet_net_pton.c

@@ -19,23 +19,22 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
-
 #ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
+#  include <sys/socket.h>
 #endif
 #ifdef HAVE_NETINET_IN_H
-#include <netinet/in.h>
-#endif
-#ifdef HAVE_ARPA_NAMESER_H
-#include <arpa/nameser.h>
+#  include <netinet/in.h>
 #endif
 #ifdef HAVE_ARPA_INET_H
-#include <arpa/inet.h>
+#  include <arpa/inet.h>
 #endif
-
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
+#endif
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#  include <arpa/nameser_compat.h>
 #endif
 
 #include <ctype.h>
@@ -47,8 +46,7 @@
 #include "ares_ipv6.h"
 #include "inet_net_pton.h"
 
-#if !defined(HAVE_INET_NET_PTON) || !defined(HAVE_INET_NET_PTON_IPV6) || \
-    !defined(HAVE_INET_PTON) || !defined(HAVE_INET_PTON_IPV6)
+#if !defined(HAVE_INET_NET_PTON) || !defined(HAVE_INET_NET_PTON_IPV6)
 
 /*
  * static int
@@ -425,7 +423,7 @@ ares_inet_net_pton(int af, const char *src, void *dst, size_t size)
 
 #endif
 
-#if !defined(HAVE_INET_PTON) || !defined(HAVE_INET_PTON_IPV6)
+#ifndef HAVE_INET_PTON
 int ares_inet_pton(int af, const char *src, void *dst)
 {
   int size, result;

ares/inet_net_pton.h

@@ -18,7 +18,7 @@
  * without express or implied warranty.
  */
 
-#if defined(HAVE_INET_PTON) && defined(HAVE_INET_PTON_IPV6)
+#ifdef HAVE_INET_PTON
 #define ares_inet_pton(x,y,z) inet_pton(x,y,z)
 #else
 int ares_inet_pton(int af, const char *src, void *dst);

ares/inet_ntop.c

@@ -18,21 +18,22 @@
 
 #include "setup.h"
 
-#if defined(WIN32) && !defined(WATT32)
-#include "nameser.h"
-#else
 #ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
+#  include <sys/socket.h>
 #endif
 #ifdef HAVE_NETINET_IN_H
-#include <netinet/in.h>
-#endif
-#ifdef HAVE_ARPA_NAMESER_H
-#include <arpa/nameser.h>
+#  include <netinet/in.h>
 #endif
 #ifdef HAVE_ARPA_INET_H
-#include <arpa/inet.h>
+#  include <arpa/inet.h>
 #endif
+#ifdef HAVE_ARPA_NAMESER_H
+#  include <arpa/nameser.h>
+#else
+#  include "nameser.h"
+#endif
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#  include <arpa/nameser_compat.h>
 #endif
 
 #include <ctype.h>
@@ -45,7 +46,7 @@
 #include "inet_ntop.h"
 
 
-#if !defined(HAVE_INET_NTOP) || !defined(HAVE_INET_NTOP_IPV6)
+#ifndef HAVE_INET_NTOP
 
 #ifdef SPRINTF_CHAR
 # define SPRINTF(x) strlen(sprintf/**/x)

ares/inet_ntop.h

@@ -18,7 +18,7 @@
  * without express or implied warranty.
  */
 
-#if defined(HAVE_INET_NTOP) && defined(HAVE_INET_NTOP_IPV6)
+#ifdef HAVE_INET_NTOP
 #define ares_inet_ntop(w,x,y,z) inet_ntop(w,x,y,z)
 #else
 const char *ares_inet_ntop(int af, const void *src, char *dst, size_t size);

ares/m4/cares-confopts.m4

@@ -0,0 +1,142 @@
+#***************************************************************************
+# $Id$
+#
+# Copyright (C) 2008 by Daniel Stenberg et al
+#
+# Permission to use, copy, modify, and distribute this software and its
+# documentation for any purpose and without fee is hereby granted, provided
+# that the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+#***************************************************************************
+
+# File version for 'aclocal' use. Keep it a single number.
+# serial 2
+
+
+dnl CARES_CHECK_OPTION_DEBUG
+dnl -------------------------------------------------
+dnl Verify if configure has been invoked with option
+dnl --enable-debug or --disable-debug, and set shell
+dnl variable want_debug value as appropriate.
+
+AC_DEFUN([CARES_CHECK_OPTION_DEBUG], [
+  AC_BEFORE([$0],[CARES_CHECK_OPTION_WARNINGS])dnl
+  AC_BEFORE([$0],[CARES_CHECK_PROG_CC])dnl
+  AC_MSG_CHECKING([whether to enable debug build options])
+  OPT_DEBUG_BUILD="default"
+  AC_ARG_ENABLE(debug,
+AC_HELP_STRING([--enable-debug],[Enable debug build options])
+AC_HELP_STRING([--disable-debug],[Disable debug build options]),
+  OPT_DEBUG_BUILD=$enableval)
+  case "$OPT_DEBUG_BUILD" in
+    no)
+      dnl --disable-debug option used
+      want_debug="no"
+      ;;
+    default)
+      dnl configure option not specified
+      want_debug="no"
+      ;;
+    *)
+      dnl --enable-debug option used
+      want_debug="yes"
+      ;;
+  esac
+  AC_MSG_RESULT([$want_debug])
+])
+
+
+dnl CARES_CHECK_OPTION_OPTIMIZE
+dnl -------------------------------------------------
+dnl Verify if configure has been invoked with option
+dnl --enable-optimize or --disable-optimize, and set
+dnl shell variable want_optimize value as appropriate.
+
+AC_DEFUN([CARES_CHECK_OPTION_OPTIMIZE], [
+  AC_REQUIRE([CARES_CHECK_OPTION_DEBUG])dnl
+  AC_BEFORE([$0],[CARES_CHECK_PROG_CC])dnl
+  AC_MSG_CHECKING([whether to enable compiler optimizer])
+  OPT_COMPILER_OPTIMIZE="default"
+  AC_ARG_ENABLE(optimize,
+AC_HELP_STRING([--enable-optimize(=OPT)],[Enable compiler optimizations (default=-O2)])
+AC_HELP_STRING([--disable-optimize],[Disable compiler optimizations]),
+  OPT_COMPILER_OPTIMIZE=$enableval)
+  case "$OPT_COMPILER_OPTIMIZE" in
+    no)
+      dnl --disable-optimize option used. We will handle this as
+      dnl a request to disable compiler optimizations if possible.
+      dnl If the compiler is known CFLAGS and CPPFLAGS will be
+      dnl overridden, otherwise this can not be honored.
+      want_optimize="no"
+      AC_MSG_RESULT([no])
+      ;;
+    default)
+      dnl configure's optimize option not specified. Initially we will
+      dnl handle this as a a request contrary to configure's setting
+      dnl for --enable-debug. IOW, initially, for debug-enabled builds
+      dnl this will be handled as a request to disable optimizations if
+      dnl possible, and for debug-disabled builds this will be handled
+      dnl initially as a request to enable optimizations if possible.
+      dnl Finally, if the compiler is known and CFLAGS and CPPFLAGS do
+      dnl not have any optimizer flag the request will be honored, in
+      dnl any other case the request can not be honored.
+      dnl IOW, existing optimizer flags defined in CFLAGS or CPPFLAGS
+      dnl will always take precedence over any initial assumption.
+      if test "$want_debug" = "yes"; then
+        want_optimize="assume_no"
+        AC_MSG_RESULT([not specified (assuming no)])
+      else
+        want_optimize="assume_yes"
+        AC_MSG_RESULT([not specified (assuming yes)])
+      fi
+      ;;
+    *)
+      dnl --enable-optimize option used. We will handle this as
+      dnl a request to enable compiler optimizations if possible.
+      dnl If the compiler is known CFLAGS and CPPFLAGS will be
+      dnl overridden, otherwise this can not be honored.
+      want_optimize="yes"
+      AC_MSG_RESULT([yes])
+      ;;
+  esac
+])
+
+
+dnl CARES_CHECK_OPTION_WARNINGS
+dnl -------------------------------------------------
+dnl Verify if configure has been invoked with option
+dnl --enable-warnings or --disable-warnings, and set
+dnl shell variable want_warnings as appropriate.
+
+AC_DEFUN([CARES_CHECK_OPTION_WARNINGS], [
+  AC_REQUIRE([CARES_CHECK_OPTION_DEBUG])dnl
+  AC_BEFORE([$0],[CARES_CHECK_PROG_CC])dnl
+  AC_MSG_CHECKING([whether to enable strict compiler warnings])
+  OPT_COMPILER_WARNINGS="default"
+  AC_ARG_ENABLE(warnings,
+AC_HELP_STRING([--enable-warnings],[Enable strict compiler warnings])
+AC_HELP_STRING([--disable-warnings],[Disable strict compiler warnings]),
+  OPT_COMPILER_WARNINGS=$enableval)
+  case "$OPT_COMPILER_WARNINGS" in
+    no)
+      dnl --disable-warnings option used
+      want_warnings="no"
+      ;;
+    default)
+      dnl configure option not specified, so
+      dnl use same setting as --enable-debug
+      want_warnings="$want_debug"
+      ;;
+    *)
+      dnl --enable-warnings option used
+      want_warnings="yes"
+      ;;
+  esac
+  AC_MSG_RESULT([$want_warnings])
+])

ares/m4/cares-reentrant.m4

@@ -16,7 +16,7 @@
 #***************************************************************************
 
 # File version for 'aclocal' use. Keep it a single number.
-# serial 2
+# serial 3
 
 dnl Note 1
 dnl ------
@@ -333,9 +333,6 @@ dnl makes several _r functions compiler visible.
 dnl Internal macro for CARES_CONFIGURE_REENTRANT.
 
 AC_DEFUN([CARES_CHECK_NEED_REENTRANT_FUNCTIONS_R], [
-  #
-  tmp_need_reentrant="no"
-  #
   if test "$tmp_need_reentrant" = "no"; then
     CARES_CHECK_NEED_REENTRANT_GMTIME_R
   fi
@@ -366,6 +363,24 @@ AC_DEFUN([CARES_CHECK_NEED_REENTRANT_FUNCTIONS_R], [
 ])
 
 
+dnl CARES_CHECK_NEED_REENTRANT_SYSTEM
+dnl -------------------------------------------------
+dnl Checks if the preprocessor _REENTRANT definition
+dnl must be unconditionally done for this platform.
+dnl Internal macro for CARES_CONFIGURE_REENTRANT.
+
+AC_DEFUN([CARES_CHECK_NEED_REENTRANT_SYSTEM], [
+  case $host in
+    *-*-solaris*)
+      tmp_need_reentrant="yes"
+      ;;
+    *)
+      tmp_need_reentrant="no"
+      ;;
+  esac
+])
+
+
 dnl CARES_CONFIGURE_FROM_NOW_ON_WITH_REENTRANT
 dnl -------------------------------------------------
 dnl This macro ensures that configuration tests done
@@ -421,7 +436,10 @@ AC_DEFUN([CARES_CONFIGURE_REENTRANT], [
   #
   if test "$tmp_reentrant_initially_defined" = "no"; then
     AC_MSG_CHECKING([if _REENTRANT is actually needed])
-    CARES_CHECK_NEED_REENTRANT_FUNCTIONS_R
+    CARES_CHECK_NEED_REENTRANT_SYSTEM
+    if test "$tmp_need_reentrant" = "no"; then
+      CARES_CHECK_NEED_REENTRANT_FUNCTIONS_R
+    fi
     if test "$tmp_need_reentrant" = "yes"; then
       AC_MSG_RESULT([yes])
     else

ares/nameser.h

@@ -3,39 +3,22 @@
 #ifndef ARES_NAMESER_H
 #define ARES_NAMESER_H
 
-/* Windows-only header file provided by liren@vivisimo.com to make his Windows
-   port build */
+/* header file provided by liren@vivisimo.com */
 
-#ifndef NETWARE
-#include <process.h> /* for the _getpid() proto */
-#endif  /* !NETWARE */
-#include <sys/types.h>
+#ifndef HAVE_ARPA_NAMESER_H
 
-#ifndef NETWARE
-
-/* Structure for scatter/gather I/O.  */
-struct iovec
-{
-    void *iov_base;     /* Pointer to data.  */
-    size_t iov_len;     /* Length of data.  */
-};
-
-#ifndef __WATCOMC__
-#define getpid() _getpid()
-#endif
-
-int ares_writev (SOCKET s, const struct iovec *vector, size_t count);
-#define writev(s,vect,count)  ares_writev(s,vect,count)
-
-#endif  /* !NETWARE */
-
-#define NS_CMPRSFLGS  0xc0
-#define NS_IN6ADDRSZ  16
-#define NS_INT16SZ    2
-#define NS_INADDRSZ   4
-
-  /* Flag bits indicating name compression. */
-#define INDIR_MASK    NS_CMPRSFLGS
+#define NS_PACKETSZ     512   /* maximum packet size */
+#define NS_MAXDNAME     256   /* maximum domain name */
+#define NS_MAXCDNAME    255   /* maximum compressed domain name */
+#define NS_MAXLABEL     63
+#define NS_HFIXEDSZ     12    /* #/bytes of fixed data in header */
+#define NS_QFIXEDSZ     4     /* #/bytes of fixed data in query */
+#define NS_RRFIXEDSZ    10    /* #/bytes of fixed data in r record */
+#define NS_INT16SZ      2
+#define NS_INADDRSZ     4
+#define NS_IN6ADDRSZ    16
+#define NS_CMPRSFLGS    0xc0  /* Flag bits indicating name compression. */
+#define NS_DEFAULTPORT  53    /* For both TCP and UDP. */
 
 typedef enum __ns_class {
     ns_c_invalid = 0,       /* Cookie. */
@@ -49,8 +32,6 @@ typedef enum __ns_class {
     ns_c_max = 65536
 } ns_class;
 
-#define C_IN           ns_c_in
-
 typedef enum __ns_type {
     ns_t_invalid = 0,       /* Cookie. */
     ns_t_a = 1,             /* Host address. */
@@ -94,6 +75,8 @@ typedef enum __ns_type {
     ns_t_dname = 39,        /* Non-terminal DNAME (for IPv6) */
     ns_t_sink = 40,         /* Kitchen sink (experimentatl) */
     ns_t_opt = 41,          /* EDNS0 option (meta-RR) */
+    ns_t_apl = 42,          /* Address prefix list (RFC3123) */
+    ns_t_tkey = 249,        /* Transaction key */
     ns_t_tsig = 250,        /* Transaction signature. */
     ns_t_ixfr = 251,        /* Incremental zone transfer. */
     ns_t_axfr = 252,        /* Transfer zone of authority. */
@@ -104,19 +87,6 @@ typedef enum __ns_type {
     ns_t_max = 65536
 } ns_type;
 
-#define T_PTR          ns_t_ptr
-#define T_A            ns_t_a
-
-
-#define NS_DEFAULTPORT        53      /* For both TCP and UDP. */
-#define NAMESERVER_PORT        NS_DEFAULTPORT
-
-#define NS_HFIXEDSZ   12      /* #/bytes of fixed data in header */
-#define HFIXEDSZ      NS_HFIXEDSZ
-
-#define NS_QFIXEDSZ   4       /* #/bytes of fixed data in query */
-#define QFIXEDSZ       NS_QFIXEDSZ
-
 typedef enum __ns_opcode {
     ns_o_query = 0,         /* Standard query. */
     ns_o_iquery = 1,        /* Inverse query (deprecated/unsupported). */
@@ -127,25 +97,6 @@ typedef enum __ns_opcode {
     ns_o_max = 6
 } ns_opcode;
 
-#define QUERY          ns_o_query
-
-#define NS_MAXLABEL   63
-#define MAXLABEL       NS_MAXLABEL
-
-#define NS_RRFIXEDSZ  10      /* #/bytes of fixed data in r record */
-#define RRFIXEDSZ      NS_RRFIXEDSZ
-
-#define T_CNAME                ns_t_cname
-
-#define NS_MAXDNAME   256     /* maximum domain name */
-#define MAXDNAME      NS_MAXDNAME
-
-#define NS_MAXCDNAME  255     /* maximum compressed domain name */
-#define MAXCDNAME     NS_MAXCDNAME
-
-#define NS_PACKETSZ   512     /* maximum packet size */
-#define PACKETSZ       NS_PACKETSZ
-
 typedef enum __ns_rcode {
     ns_r_noerror = 0,       /* No error occurred. */
     ns_r_formerr = 1,       /* Format error. */
@@ -166,6 +117,22 @@ typedef enum __ns_rcode {
     ns_r_badtime = 18
 } ns_rcode;
 
+#endif /* HAVE_ARPA_NAMESER_H */
+
+#ifndef HAVE_ARPA_NAMESER_COMPAT_H
+
+#define PACKETSZ         NS_PACKETSZ
+#define MAXDNAME         NS_MAXDNAME
+#define MAXCDNAME        NS_MAXCDNAME
+#define MAXLABEL         NS_MAXLABEL
+#define HFIXEDSZ         NS_HFIXEDSZ
+#define QFIXEDSZ         NS_QFIXEDSZ
+#define RRFIXEDSZ        NS_RRFIXEDSZ
+#define INDIR_MASK       NS_CMPRSFLGS
+#define NAMESERVER_PORT  NS_DEFAULTPORT
+
+#define QUERY           ns_o_query
+
 #define SERVFAIL        ns_r_servfail
 #define NOTIMP          ns_r_notimpl
 #define REFUSED         ns_r_refused
@@ -174,6 +141,7 @@ typedef enum __ns_rcode {
 #define FORMERR         ns_r_formerr
 #define NXDOMAIN        ns_r_nxdomain
 
+#define C_IN            ns_c_in
 #define C_CHAOS         ns_c_chaos
 #define C_HS            ns_c_hs
 #define C_NONE          ns_c_none
@@ -221,4 +189,6 @@ typedef enum __ns_rcode {
 #define T_MAILA         ns_t_maila
 #define T_ANY           ns_t_any
 
+#endif /* HAVE_ARPA_NAMESER_COMPAT_H */
+
 #endif /* ARES_NAMESER_H */

ares/setup.h

@@ -139,24 +139,6 @@
 #define HAVE_SYS_UIO_H
 #endif
 
-#if (defined(WIN32) || defined(WATT32)) && \
-   !(defined(__MINGW32__) || defined(NETWARE) || defined(__DJGPP__))
-/* protos for the functions we provide in windows_port.c */
-int ares_strncasecmp(const char *s1, const char *s2, int n);
-int ares_strcasecmp(const char *s1, const char *s2);
-
-/* use this define magic to prevent us from adding symbol names to the library
-   that is a high-risk to collide with another libraries' attempts to do the
-   same */
-#define strncasecmp(a,b,c) ares_strncasecmp(a,b,c)
-#define strcasecmp(a,b) ares_strcasecmp(a,b)
-#ifdef _MSC_VER
-#  if _MSC_VER >= 1400
-#    define strdup(a) _strdup(a)
-#  endif
-#endif
-#endif
-
 /* IPv6 compatibility */
 #if !defined(HAVE_AF_INET6)
 #if defined(HAVE_PF_INET6)

ares/vc/areslib/areslib.dsp

@@ -181,6 +181,10 @@ SOURCE=..\..\ares_send.c
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\ares_strcasecmp.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\ares_strerror.c
 # End Source File
 # Begin Source File
@@ -193,6 +197,10 @@ SOURCE=..\..\ares_version.c
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\ares_writev.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\bitncmp.c
 # End Source File
 # Begin Source File
@@ -233,10 +241,18 @@ SOURCE=..\..\ares_private.h
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\ares_strcasecmp.h
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\ares_version.h
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\ares_writev.h
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\bitncmp.h
 # End Source File
 # Begin Source File

ares/windows_port.c

@@ -5,20 +5,6 @@
 /* only do the following on windows
  */
 #if (defined(WIN32) || defined(WATT32)) && !defined(MSDOS)
-#include <stdio.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <string.h>
-#include <errno.h>
-#include <malloc.h>
-
-#ifdef WATT32
-#include <sys/socket.h>
-#else
-#include "nameser.h"
-#endif
-#include "ares.h"
-#include "ares_private.h"
 
 #ifdef __WATCOMC__
 /*
@@ -34,57 +20,4 @@ WINAPI DllMain (HINSTANCE hnd, DWORD reason, LPVOID reserved)
 }
 #endif
 
-#ifndef __MINGW32__
-int
-ares_strncasecmp(const char *a, const char *b, int n)
-{
-    int i;
-
-    for (i = 0; i < n; i++) {
-        int c1 = ISUPPER(a[i]) ? tolower(a[i]) : a[i];
-        int c2 = ISUPPER(b[i]) ? tolower(b[i]) : b[i];
-        if (c1 != c2) return c1-c2;
-    }
-    return 0;
-}
-
-int
-ares_strcasecmp(const char *a, const char *b)
-{
-    return strncasecmp(a, b, strlen(a)+1);
-}
-#endif
-
-int
-ares_writev (ares_socket_t s, const struct iovec *vector, size_t count)
-{
-  char *buffer, *bp;
-  size_t i, bytes = 0;
-
-  /* Find the total number of bytes to write
-   */
-  for (i = 0; i < count; i++)
-      bytes += vector[i].iov_len;
-
-  if (bytes == 0)   /* not an error */
-     return (0);
-
-  /* Allocate a temporary buffer to hold the data
-   */
-  buffer = bp = (char*) alloca (bytes);
-  if (!buffer)
-  {
-    SET_ERRNO(ENOMEM);
-    return (-1);
-  }
-
-  /* Copy the data into buffer.
-   */
-  for (i = 0; i < count; ++i)
-  {
-    memcpy (bp, vector[i].iov_base, vector[i].iov_len);
-    bp += vector[i].iov_len;
-  }
-  return (int)swrite(s, buffer, bytes);
-}
 #endif /* WIN32 builds only */

configure.ac

@@ -36,6 +36,10 @@ AC_CONFIG_SRCDIR([lib/urldata.h])
 AM_CONFIG_HEADER(lib/config.h src/config.h include/curl/curlbuild.h)
 AM_MAINTAINER_MODE
 
+CURL_CHECK_OPTION_DEBUG
+CURL_CHECK_OPTION_OPTIMIZE
+CURL_CHECK_OPTION_WARNINGS
+
 dnl SED is mandatory for configure process and libtool.
 dnl Set it now, allowing it to be changed later.
 AC_PATH_PROG([SED], [sed], [not_found],
@@ -130,7 +134,7 @@ dnl Get system canonical name
 AC_DEFINE_UNQUOTED(OS, "${host}", [cpu-machine-OS])
 
 dnl Checks for programs.
-AC_PROG_CC
+CURL_CHECK_PROG_CC
 
 dnl Our curl_off_t internal and external configure settings
 CURL_CONFIGURE_CURL_OFF_T
@@ -147,6 +151,8 @@ AC_SYS_LARGEFILE
 dnl support building of Windows DLLs
 AC_LIBTOOL_WIN32_DLL
 
+CURL_PROCESS_DEBUG_BUILD_OPTS
+
 dnl skip libtool C++ and Fortran compiler checks
 m4_ifdef([AC_PROG_CXX], [m4_undefine([AC_PROG_CXX])])
 m4_defun([AC_PROG_CXX],[])
@@ -163,10 +169,10 @@ m4_defun([AC_LIBTOOL_CXXCPP],[true])
 m4_ifdef([AC_LIBTOOL_F77], [m4_undefine([AC_LIBTOOL_F77])])
 m4_defun([AC_LIBTOOL_F77],[])
 
-dnl force libtool to build static libraries with PIC on AMD64-linux
-AC_MSG_CHECKING([if arch-OS host is AMD64-linux (to build static libraries with PIC)])
+dnl force libtool to build static libraries with PIC on AMD64-Linux & FreeBSD
+AC_MSG_CHECKING([if arch-OS host is AMD64-Linux/FreeBSD (to build static libraries with PIC)])
 case $host in
-  x86_64*linux*)
+  x86_64*linux*|amd64*freebsd*|ia64*freebsd*)
     AC_MSG_RESULT([yes])
     with_pic=yes
     ;;
@@ -245,30 +251,25 @@ dnl **********************************************************************
 dnl platform/compiler/architecture specific checks/flags
 dnl **********************************************************************
 
+CURL_CHECK_COMPILER
+CURL_SET_COMPILER_BASIC_OPTS
+CURL_SET_COMPILER_DEBUG_OPTS
+CURL_SET_COMPILER_OPTIMIZE_OPTS
+CURL_SET_COMPILER_WARNING_OPTS
+
 case $host in
   #
-  x86_64*linux*)
+  x86_64*linux*|amd64*freebsd*|ia64*freebsd*)
     #
-    dnl find out if icc is being used
-    if test "z$ICC" = "z"; then
-      CURL_DETECT_ICC
-    fi
-    #
-    if test "$ICC" = "yes"; then
-      dnl figure out icc version
-      AC_MSG_CHECKING([icc version])
-      iccver=`$CC -dumpversion`
-      iccnhi=`echo $iccver | cut -d . -f1`
-      iccnlo=`echo $iccver | cut -d . -f2`
-      iccnum=`(expr $iccnhi "*" 100 + $iccnlo) 2>/dev/null`
-      AC_MSG_RESULT($iccver)
+    if test "$compiler_id" = "INTEL_UNIX_C"; then
       #
-      if test "$iccnum" -ge "900" && test "$iccnum" -lt "1000"; then
+      if test "$compiler_num" -ge "900" &&
+        test "$compiler_num" -lt "1000"; then
         dnl icc 9.X specific
         CFLAGS="$CFLAGS -i-dynamic"
       fi
       #
-      if test "$iccnum" -ge "1000"; then
+      if test "$compiler_num" -ge "1000"; then
         dnl icc 10.X or later
         CFLAGS="$CFLAGS -shared-intel"
       fi
@@ -278,44 +279,6 @@ case $host in
   #
 esac
 
-AC_MSG_CHECKING([whether we are using the IBM C compiler])
-CURL_CHECK_DEF([__IBMC__], [], [silent])
-if test "$curl_cv_have_def___IBMC__" = "yes"; then
-  AC_MSG_RESULT([yes])
-  dnl Ensure that compiler optimizations are always thread-safe.
-  CFLAGS="$CFLAGS -qthreaded"
-  dnl Disable type based strict aliasing optimizations, using worst
-  dnl case aliasing assumptions when compiling. Type based aliasing
-  dnl would restrict the lvalues that could be safely used to access
-  dnl a data object.
-  CFLAGS="$CFLAGS -qnoansialias"
-  dnl Force compiler to stop after the compilation phase, without
-  dnl generating an object code file when compilation has errors.
-  CFLAGS="$CFLAGS -qhalt=e"
-else
-  AC_MSG_RESULT([no])
-fi
-
-AC_MSG_CHECKING([whether we are using the DEC/Compaq C compiler])
-CURL_CHECK_DEF([__DECC], [], [silent])
-CURL_CHECK_DEF([__DECC_VER], [], [silent])
-if test "$curl_cv_have_def___DECC" = "yes" &&
-  test "$curl_cv_have_def___DECC_VER" = "yes"; then
-  AC_MSG_RESULT([yes])
-  dnl Select strict ANSI C compiler mode
-  CFLAGS="$CFLAGS -std1"
-  dnl Turn off optimizer ANSI C aliasing rules
-  CFLAGS="$CFLAGS -noansi_alias"
-  dnl Select a higher warning level than default level2
-  CFLAGS="$CFLAGS -msg_enable level3"
-  dnl Generate warnings for missing function prototypes
-  CFLAGS="$CFLAGS -warnprotos"
-  dnl Change some warnings into fatal errors
-  CFLAGS="$CFLAGS -msg_fatal toofewargs,toomanyargs"
-else
-  AC_MSG_RESULT([no])
-fi
-
 CURL_CHECK_COMPILER_HALT_ON_ERROR
 CURL_CHECK_COMPILER_ARRAY_SIZE_NEGATIVE
 
@@ -459,6 +422,22 @@ AC_HELP_STRING([--disable-ldaps],[Disable LDAPS support]),
        AC_SUBST(CURL_DISABLE_LDAPS, [1])
 )
 
+AC_MSG_CHECKING([whether to support proxies])
+AC_ARG_ENABLE(proxy,
+AC_HELP_STRING([--enable-proxy],[Enable proxy support])
+AC_HELP_STRING([--disable-proxy],[Disable proxy support]),
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_PROXY, 1, [to disable proxies])
+       AC_SUBST(CURL_DISABLE_PROXY, [1])
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+
 AC_MSG_CHECKING([whether to support dict])
 AC_ARG_ENABLE(dict,
 AC_HELP_STRING([--enable-dict],[Enable DICT support])
@@ -527,13 +506,6 @@ AC_HELP_STRING([--disable-manual],[Disable built-in manual]),
 dnl The actual use of the USE_MANUAL variable is done much later in this
 dnl script to allow other actions to disable it as well.
 
-dnl **********************************************************************
-dnl check if this is the Intel ICC compiler, and if so make it stricter
-dnl (convert warning 147 into an error) so that it properly can detect the
-dnl gethostbyname_r() version
-dnl **********************************************************************
-CURL_DETECT_ICC([CFLAGS="$CFLAGS -we 147"])
-
 dnl **********************************************************************
 dnl Checks for libraries.
 dnl **********************************************************************
@@ -701,6 +673,7 @@ if test "$ac_cv_lib_resolve_strcasecmp" = "$ac_cv_func_strcasecmp"; then
                ,
                -lnsl)
 fi
+ac_cv_func_strcasecmp="no"
 
 dnl socket lib?
 AC_CHECK_FUNC(connect, , [ AC_CHECK_LIB(socket, connect) ])
@@ -1252,6 +1225,24 @@ if test X"$OPT_SSL" != Xno; then
     fi
   fi
 
+  dnl This is for Msys/Mingw
+  case $host in
+    *-*-msys* | *-*-mingw*)
+      AC_MSG_CHECKING([for gdi32])
+      my_ac_save_LIBS=$LIBS
+      LIBS="-lgdi32 $LIBS"
+      AC_TRY_LINK([#include <windef.h>
+                   #include <wingdi.h>],
+                   [GdiFlush();],
+                   [ dnl worked!
+                   AC_MSG_RESULT([yes])],
+                   [ dnl failed, restore LIBS
+                   LIBS=$my_ac_save_LIBS
+                   AC_MSG_RESULT(no)]
+                  )
+      ;;
+  esac
+
   AC_CHECK_LIB(crypto, CRYPTO_lock,[
      HAVECRYPTO="yes"
      LIBS="-lcrypto $LIBS"
@@ -1827,22 +1818,22 @@ then
   AC_DEFINE(DISABLED_THREADSAFE, 1,
     [Set to explicitly specify we don't want to use thread-safe functions])
 else
-  if test "$ipv6" != "yes"; then
+  dnl if test "$ipv6" != "yes"; then
     dnl dig around for gethostbyname_r()
-    CURL_CHECK_GETHOSTBYNAME_R()
+    dnl the old gethostbyname_r check was done here
 
     dnl dig around for gethostbyaddr_r()
-    dnl CURL_CHECK_GETHOSTBYADDR_R()
-  fi
+    dnl the old gethostbyaddr_r check was here BUT COMMENTED OUT
+  dnl fi
 
   dnl poke around for inet_ntoa_r()
-  CURL_CHECK_INET_NTOA_R()
+  dnl the old inet_ntoa_r check was done here
 
   dnl is there a localtime_r()
-  CURL_CHECK_LOCALTIME_R()
+  dnl the old localtime_r check was done here
 
   dnl is there a strerror_r()
-  CURL_CHECK_STRERROR_R()
+  dnl the old strerror_r check was done here
 
   checkfor_gmtime_r="yes"
 fi
@@ -1860,55 +1851,14 @@ if test "x$RECENTAIX" = "xyes"; then
   AC_DEFINE(_THREAD_SAFE, 1, [define this if you need it to compile thread-safe code])
 
   dnl is there a localtime_r()
-  CURL_CHECK_LOCALTIME_R()
+  dnl the old localtime_r check was done here
 
   dnl is there a strerror_r()
-  CURL_CHECK_STRERROR_R()
+  dnl the old strerror_r check was done here
 
   checkfor_gmtime_r="yes"
 fi
 
-if test x$cross_compiling != xyes; then
-
-  if test x$checkfor_gmtime_r = xyes; then
-
-    dnl if gmtime_r was found, verify that it actually works, as (at least) HPUX
-    dnl 10.20 is known to have a buggy one. If it doesn't work, disable use of
-    dnl it.
-
-    AC_MSG_CHECKING([if gmtime_r exists and works])
-    AC_RUN_IFELSE([[
-    #include <time.h>
-    int main(void)
-    {
-    time_t local = 1170352587;
-    struct tm *gmt;
-    struct tm keeper;
-    putenv("TZ=CST6CDT");
-    tzset();
-    gmt = gmtime_r(&local, &keeper);
-    if(gmt) {
-      return 0;
-    }
-    return 1; /* failure */
-    }
-     ]],
-     dnl success, do nothing
-     AC_MSG_RESULT(yes)
-     AC_DEFINE(HAVE_GMTIME_R, 1, [if you have (a working) gmtime_r])
-     ,
-     dnl failure, now disable the function
-     AC_MSG_RESULT(no)
-    ,
-    dnl not invoked when crosscompiling)
-     echo "hej"
-    )
-  fi
-else
-  dnl and for crosscompiling
-  AC_CHECK_FUNCS(gmtime_r)
-fi
-
 
 dnl **********************************************************************
 dnl Back to "normal" configuring
@@ -1927,6 +1877,7 @@ AC_CHECK_HEADERS(
         sys/select.h \
         sys/socket.h \
         sys/ioctl.h \
+        sys/uio.h \
         assert.h \
         unistd.h \
         stdlib.h \
@@ -2062,6 +2013,39 @@ CURL_CHECK_FUNC_RECVFROM
 CURL_CHECK_FUNC_SEND
 CURL_CHECK_MSG_NOSIGNAL
 
+CURL_CHECK_FUNC_ALARM
+CURL_CHECK_FUNC_FDOPEN
+CURL_CHECK_FUNC_FREEADDRINFO
+CURL_CHECK_FUNC_FTRUNCATE
+CURL_CHECK_FUNC_GETADDRINFO
+CURL_CHECK_FUNC_GETHOSTBYADDR_R
+CURL_CHECK_FUNC_GETHOSTBYNAME_R
+CURL_CHECK_FUNC_GETHOSTNAME
+CURL_CHECK_FUNC_GETSERVBYPORT_R
+CURL_CHECK_FUNC_GMTIME_R
+CURL_CHECK_FUNC_INET_NTOA_R
+CURL_CHECK_FUNC_INET_NTOP
+CURL_CHECK_FUNC_INET_PTON
+CURL_CHECK_FUNC_LOCALTIME_R
+CURL_CHECK_FUNC_SIGACTION
+CURL_CHECK_FUNC_SIGINTERRUPT
+CURL_CHECK_FUNC_SIGNAL
+CURL_CHECK_FUNC_SIGSETJMP
+CURL_CHECK_FUNC_STRCASECMP
+CURL_CHECK_FUNC_STRCASESTR
+CURL_CHECK_FUNC_STRCMPI
+CURL_CHECK_FUNC_STRDUP
+CURL_CHECK_FUNC_STRERROR_R
+CURL_CHECK_FUNC_STRICMP
+CURL_CHECK_FUNC_STRLCAT
+CURL_CHECK_FUNC_STRNCASECMP
+CURL_CHECK_FUNC_STRNCMPI
+CURL_CHECK_FUNC_STRNICMP
+CURL_CHECK_FUNC_STRSTR
+CURL_CHECK_FUNC_STRTOK_R
+CURL_CHECK_FUNC_STRTOLL
+CURL_CHECK_FUNC_WRITEV
+
 dnl Checks for library functions.
 dnl AC_PROG_GCC_TRADITIONAL
 
@@ -2077,9 +2061,9 @@ esac
 AC_CHECK_FUNCS([basename \
   closesocket \
   fork \
-  ftruncate \
   geteuid \
   gethostbyaddr \
+  getifaddrs \
   getpass_r \
   getppid \
   getprotobyname \
@@ -2087,28 +2071,13 @@ AC_CHECK_FUNCS([basename \
   getrlimit \
   gettimeofday \
   inet_addr \
-  inet_ntoa \
-  inet_pton \
   perror \
   pipe \
   poll \
   setlocale \
   setmode \
   setrlimit \
-  sigaction \
-  siginterrupt \
-  signal \
-  sigsetjmp \
   socket \
-  strcasecmp \
-  strcasestr \
-  strcmpi \
-  strdup \
-  stricmp \
-  strlcat \
-  strstr \
-  strtok_r \
-  strtoll \
   uname \
   utime
 ],[
@@ -2134,25 +2103,6 @@ AC_CHECK_FUNCS([basename \
 ])
 
 
-dnl sigsetjmp() might be a macro and no function so if it isn't found already
-dnl we make an extra check here!
-if test "$ac_cv_func_sigsetjmp" != "yes"; then
-  AC_MSG_CHECKING([for sigsetjmp defined as macro])
-  AC_LINK_IFELSE([
-    AC_LANG_PROGRAM([[
-#include <setjmp.h>
-    ]],[[
-      sigjmp_buf jmpenv;
-      sigsetjmp(jmpenv, 1);
-    ]])
-  ],[
-    AC_MSG_RESULT([yes])
-    AC_DEFINE(HAVE_SIGSETJMP, 1, [If you have sigsetjmp])
-  ],[
-    AC_MSG_RESULT([no])
-  ])
-fi
-
 AC_CHECK_DECL(basename, ,
               AC_DEFINE(NEED_BASENAME_PROTO, 1, [If you lack a fine basename() prototype]),
 #ifdef HAVE_STRING_H
@@ -2166,22 +2116,17 @@ AC_CHECK_DECL(basename, ,
 #endif
 )
 
-AC_CHECK_DECL(inet_pton, ,
-              AC_DEFINE(HAVE_NO_INET_PTON_PROTO, 1,
-                        [Defined if no inet_pton() prototype available]),
-[
-#ifdef HAVE_ARPA_INET_H
-#include <arpa/inet.h>
-#endif
-]
-)
 
 dnl Check if the getnameinfo function is available
 dnl and get the types of five of its arguments.
 CURL_CHECK_FUNC_GETNAMEINFO
 
 if test "$ipv6" = "yes"; then
-  CURL_CHECK_WORKING_GETADDRINFO
+  if test "$ac_cv_func_getaddrinfo" = "yes"; then
+    AC_DEFINE(ENABLE_IPV6, 1, [Define if you want to enable IPv6 support])
+    IPV6_ENABLED=1
+    AC_SUBST(IPV6_ENABLED)
+  fi
   CURL_CHECK_NI_WITHSCOPEID
 fi
 
@@ -2395,31 +2340,6 @@ AC_HELP_STRING([--disable-sspi],[Disable SSPI]),
        AC_MSG_RESULT(no)
 )
 
-dnl ************************************************************
-dnl lame option to switch on debug options
-dnl
-AC_MSG_CHECKING([whether to enable debug options])
-AC_ARG_ENABLE(debug,
-AC_HELP_STRING([--enable-debug],[Enable pedantic debug options])
-AC_HELP_STRING([--disable-debug],[Disable debug options]),
-[ case "$enableval" in
-  no)
-       AC_MSG_RESULT(no)
-       ;;
-  *)   AC_MSG_RESULT(yes)
-
-    CPPFLAGS="$CPPFLAGS -DCURLDEBUG"
-    CFLAGS="$CFLAGS -g"
-
-    dnl set compiler "debug" options to become more picky, and remove
-    dnl optimize options from CFLAGS
-    CURL_CC_DEBUG_OPTS
-       ;;
-  esac
- ],
-       AC_MSG_RESULT(no)
-)
-
 dnl ************************************************************
 dnl disable cryptographic authentication
 dnl
@@ -2546,6 +2466,90 @@ LIBS=$ALL_LIBS  dnl LIBS is a magic variable that's used for every link
 
 AM_CONDITIONAL(CROSSCOMPILING, test x$cross_compiling = xyes)
 
+dnl
+dnl For keeping supported features and protocols also in pkg-config file
+dnl since it is more cross-compile frient than curl-config
+dnl
+
+if test "x$USE_SSLEAY" = "x1"; then
+  SUPPORT_FEATURES="$SUPPORT_FEATURES SSL"
+elif test -n "$SSL_ENABLED"; then
+  SUPPORT_FEATURES="$SUPPORT_FEATURES SSL"
+fi
+if test "@KRB4_ENABLED@" = "x1"; then
+  SUPPORT_FEATURES="$SUPPORT_FEATURES KRB4"
+fi
+if test "x$IPV6_ENABLED" = "x1"; then
+  SUPPORT_FEATURES="$SUPPORT_FEATURES IPv6"
+fi
+if test "x$HAVE_LIBZ" = "x1"; then
+  SUPPORT_FEATURES="$SUPPORT_FEATURES libz"
+fi
+if test "x$HAVE_ARES" = "x1"; then
+  SUPPORT_FEATURES="$SUPPORT_FEATURES AsynchDNS"
+fi
+if test "x$IDN_ENABLED" = "x1"; then
+  SUPPORT_FEATURES="$SUPPORT_FEATURES IDN"
+fi
+if test "x$USE_WINDOWS_SSPI" = "x1"; then
+  SUPPORT_FEATURES="$SUPPORT_FEATURES SSPI"
+fi
+if test "x$USE_SSLEAY" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1"; then
+  SUPPORT_FEATURES="$SUPPORT_FEATURES NTLM"
+fi
+
+AC_SUBST(SUPPORT_FEATURES)
+
+dnl For supported protocols in pkg-config file
+if test "x$CURL_DISABLE_HTTP" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS HTTP"
+  if test "x$SSL_ENABLED" = "x1"; then
+    SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS HTTPS"
+  fi
+fi
+if test "x$CURL_DISABLE_FTP" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS FTP"
+  if test "x$SSL_ENABLED" = "x1"; then
+    SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS FTPS"
+  fi
+fi
+if test "x$CURL_DISABLE_FILE" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS FILE"
+fi
+if test "x$CURL_DISABLE_TELNET" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS TELNET"
+fi
+if test "x$CURL_DISABLE_LDAP" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS LDAP"
+fi
+if test "x$CURL_DISABLE_LDAPS" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS LDAPS"
+fi
+if test "x$CURL_DISABLE_DICT" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS DICT"
+fi
+if test "x$CURL_DISABLE_TFTP" != "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS TFTP"
+fi
+if test "x$USE_LIBSSH2" = "x1"; then
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS SCP"
+  SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS SFTP"
+fi
+
+AC_SUBST(SUPPORT_PROTOCOLS)
+
+dnl squeeze whitespace out of some variables
+
+squeeze CFLAGS
+squeeze CPPFLAGS
+squeeze DEFS
+squeeze LDFLAGS
+squeeze LIBS
+
+squeeze CURL_LIBS
+squeeze LIBCURL_LIBS
+squeeze TEST_SERVER_LIBS
+
 AC_CONFIG_FILES([Makefile \
            docs/Makefile \
            docs/examples/Makefile \

curl-config.in

@@ -80,71 +80,15 @@ while test $# -gt 0; do
 	;;
 
     --feature|--features)
-	if test "@USE_SSLEAY@" = "1"; then
-          echo "SSL"
-          NTLM=1 # OpenSSL implies NTLM
-        elif test -n "@SSL_ENABLED@"; then
-          echo "SSL"
-        fi
-	if test "@KRB4_ENABLED@" = "1"; then
-          echo "KRB4"
-        fi
-	if test "@IPV6_ENABLED@" = "1"; then
-          echo "IPv6"
-        fi
-	if test "@HAVE_LIBZ@" = "1"; then
-          echo "libz"
-        fi
-	if test "@HAVE_ARES@" = "1"; then
-          echo "AsynchDNS"
-        fi
-	if test "@IDN_ENABLED@" = "1"; then
-          echo "IDN"
-        fi
-	if test "@USE_WINDOWS_SSPI@" = "1"; then
-          echo "SSPI"
-          NTLM=1
-        fi
-	if test "$NTLM" = "1"; then
-          echo "NTLM"
-        fi
+        for feature in @SUPPORT_FEATURES@ ""; do
+            test -n "$feature" && echo "$feature"
+        done
 	;;
 
     --protocols)
-	if test "@CURL_DISABLE_HTTP@" != "1"; then
-          echo "HTTP"
-	  if test "@SSL_ENABLED@" = "1"; then
-            echo "HTTPS"
-          fi
-        fi
-	if test "@CURL_DISABLE_FTP@" != "1"; then
-          echo "FTP"
-	  if test "@SSL_ENABLED@" = "1"; then
-            echo "FTPS"
-          fi
-        fi
-	if test "@CURL_DISABLE_FILE@" != "1"; then
-          echo "FILE"
-        fi
-	if test "@CURL_DISABLE_TELNET@" != "1"; then
-          echo "TELNET"
-        fi
-	if test "@CURL_DISABLE_LDAP@" != "1"; then
-          echo "LDAP"
-        fi
-	if test "@CURL_DISABLE_LDAPS@" != "1"; then
-          echo "LDAPS"
-        fi
-	if test "@CURL_DISABLE_DICT@" != "1"; then
-          echo "DICT"
-        fi
-	if test "@CURL_DISABLE_TFTP@" != "1"; then
-          echo "TFTP"
-        fi
-	if test "@USE_LIBSSH2@" = "1"; then
-          echo "SCP"
-          echo "SFTP"
-        fi
+        for protocol in @SUPPORT_PROTOCOLS@; do
+            echo "$protocol"
+        done
 	;;
     --version)
 	echo libcurl @VERSION@

docs/BINDINGS

@@ -181,6 +181,7 @@ Smalltalk
   http://www.squeaksource.com/CurlPlugin/
 
 SP-Forth
+
   SP-Forth binding by ygrek
   http://www.forth.org.ru/~ac/lib/lin/curl/
 
@@ -199,6 +200,11 @@ Visual Basic
   libcurl-vb by Jeffrey Phillips
   http://sourceforge.net/projects/libcurl-vb/
 
+Visual Foxpro
+
+  by Carlos Alloatti
+  http://www.ctl32.com.ar/libcurl.asp
+
 Q
   The libcurl module is part of the default install
   http://q-lang.sourceforge.net/

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: Feb 18, 2008 (http://curl.haxx.se/docs/faq.html)
+Updated: Sep 24, 2008 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _
                               ___| | | |  _ \| |
                              / __| | | | |_) | |
@@ -70,6 +70,7 @@ FAQ
   4.13 Why is curl -R on Windows one hour off?
   4.14 Redirects work in browser but not with curl!
   4.15 FTPS doesn't work
+  4.16 My HTTP POST or PUT requests are slow!
 
  5. libcurl Issues
   5.1 Is libcurl thread-safe?
@@ -85,6 +86,7 @@ FAQ
   5.11 How do I make libcurl not receive the whole HTTP response?
   5.12 Can I make libcurl fake or hide my real IP address?
   5.13 How do I stop an ongoing transfer?
+  5.14 Using C++ non-static functions for callbacks?
 
  6. License Issues
   6.1 I have a GPL program, can I use the libcurl library?
@@ -867,6 +869,20 @@ FAQ
   mandated by RFC4217. This kind of connection then of course uses the
   standard FTP port 21 by default.
 
+  4.16 My HTTP POST or PUT requests are slow!
+
+  libcurl makes all POST and PUT requests (except for POST requests with a
+  very tiny request body) use the "Expect: 100-continue" header. This header
+  allows the server to deny the operation early so that libcurl can bail out
+  already before having to send any data. This is useful in authentication
+  cases and others.
+
+  However, many servers don't implement the Expect: stuff properly and if the
+  server doesn't respond (positively) within 1 second libcurl will continue
+  and send off the data anyway.
+
+  You can disable libcurl's use of the Expect: header the same way you disable
+  any header, using -H / CURLOPT_HTTPHEADER, or by forcing it to use HTTP 1.0.
 
 5. libcurl Issues
 
@@ -1070,6 +1086,24 @@ FAQ
   If you're using the multi interface, you also stop a transfer by removing
   the particular easy handle from the multi stack.
 
+  5.14 Using C++ non-static functions for callbacks?
+
+  libcurl is a C library, it doesn't know anything about C++ member functions.
+
+  You can overcome this "limitation" with a relative ease using a static
+  member function that is passed a pointer to the class:
+
+     // f is the pointer to your object.
+     static YourClass::staticFunction(void *buffer, size_t sz, size_t n, void *f)
+     {
+       // Call non-static member function.
+       static_cast<YourClass*>(f)->nonStaticFunction();
+     }
+
+     // This is how you pass pointer to the static function:
+     curl_easy_setopt(hcurl, CURLOPT_WRITEFUNCTION, YourClass:staticFunction);
+     curl_easy_setopt(hcurl, CURLOPT_WRITEDATA, this);
+
 6. License Issues
 
   Curl and libcurl are released under a MIT/X derivate license. The license is

docs/INSTALL

@@ -770,10 +770,12 @@ REDUCING SIZE
    will not use, here are some other flags that can reduce the size of the
    library:
 
-     --disable-ares (disables support for the ARES DNS library)
+     --disable-ares (disables support for the C-ARES DNS library)
      --disable-cookies (disables support for HTTP cookies)
      --disable-crypto-auth (disables HTTP cryptographic authentication)
      --disable-ipv6 (disables support for IPv6)
+     --disable-manual (disables support for the built-in documentation)
+     --disable-proxy (disables support for HTTP and SOCKS proxies)
      --disable-verbose (eliminates debugging strings and error code strings)
      --enable-hidden-symbols (eliminates unneeded symbols in the shared library)
      --without-libidn (disables support for the libidn DNS library)
@@ -789,12 +791,24 @@ REDUCING SIZE
    sections of the shared library using the -R option to objcopy (e.g. the
    .comment section).
 
-   Using these techniques it is possible to create an HTTP-only shared libcurl
-   library for i386 Linux platforms that is only 96 KiB in size (as of libcurl
-   version 7.17.1, using gcc 4.2.2).
+   Using these techniques it is possible to create a basic HTTP-only shared
+   libcurl library for i386 Linux platforms that is only 94 KiB in size, and
+   an FTP-only library that is 87 KiB in size (as of libcurl version 7.19.1,
+   using gcc 4.2.2).
 
    You may find that statically linking libcurl to your application will
-   result in a lower total size.
+   result in a lower total size than dynamically linking.
+
+   Note that the curl test harness can detect the use of some, but not all, of
+   the --disable statements suggested above. Use will cause tests relying on
+   those features to fail.  The test harness can be manually forced to skip
+   the relevant tests by specifying certain key words on the runtests.pl
+   command line.  Following is a list of appropriate key words:
+
+     --disable-cookies          !cookies
+     --disable-crypto-auth      !HTTP\ Digest\ auth !HTTP\ proxy\ Digest\ auth
+     --disable-manual           !--manual
+     --disable-proxy            !HTTP\ proxy !proxytunnel !SOCKS4 !SOCKS5
 
 
 PORTS
@@ -811,6 +825,7 @@ PORTS
         - Alpha OpenBSD 3.0
         - Alpha OpenVMS V7.1-1H2
         - Alpha Tru64 v5.0 5.1
+        - AVR32 Linux
         - HP-PA HP-UX 9.X 10.X 11.X
         - HP-PA Linux
         - HP3000 MPE/iX

docs/KNOWN_BUGS

@@ -160,11 +160,6 @@ may have been fixed since this was written!
   doesn't do a HEAD first to get the initial size. This needs to be done
   manually for HTTP PUT resume to work, and then '-C [index]'.
 
-7. CURLOPT_USERPWD and CURLOPT_PROXYUSERPWD have no way of providing user names
-  that contain a colon. This can't be fixed easily in a backwards compatible
-  way without adding new options (and then, they should most probably allow
-  setting user name and password separately).
-
 6. libcurl ignores empty path parts in FTP URLs, whereas RFC1738 states that
   such parts should be sent to the server as 'CWD ' (without an argument).
   The only exception to this rule, is that we knowingly break this if the

docs/THANKS

@@ -35,6 +35,7 @@ Andreas Faerber
 Andreas Ntaflos
 Andreas Olsson
 Andreas Rieke
+Andreas Schuldei
 Andres Garcia
 Andrew Benham
 Andrew Biggs
@@ -46,15 +47,18 @@ Andrew Wansink
 Andr<EFBFBD>s Garc<72>a
 Andy Cedilnik
 Andy Serpa
+Andy Tsouladze
 Angus Mackay
 Antoine Calando
 Anton Kalmykov
 Arkadiusz Miskiewicz
 Armel Asselin
+Arnaud Ebalard
 Arve Knudsen
 Ates Goral
 Augustus Saunders
 Avery Fay
+Axel Tillequin
 Bart Whiteley
 Ben Greear
 Ben Madsen
@@ -100,6 +104,7 @@ Cody Jones
 Colin Hogben
 Colin Watson
 Colm Buckley
+Constantine Sapuntzakis
 Cory Nelson
 Craig Davison
 Craig Markwardt
@@ -126,6 +131,7 @@ Dave Halbakken
 Dave Hamilton
 Dave May
 Dave Vasilevsky
+David Bau
 David Byron
 David Cohen
 David Eriksson
@@ -145,6 +151,7 @@ David Tarendash
 David Thiel
 David Wright
 David Yan
+Dengminwen
 Detlef Schmier
 Diego Casorran
 Dima Barsky
@@ -172,6 +179,7 @@ Dylan Ellicott
 Dylan Salisbury
 Early Ehlinger
 Edin Kadribasic
+Eduard Bloch
 Eetu Ojanen
 Ellis Pritchard
 Emil Romanus
@@ -241,6 +249,7 @@ Hamish Mackenzie
 Hang Kin Lau
 Hanno Kranzhoff
 Hans Steegers
+Hans-Jurgen May
 Hardeep Singh
 Harshal Pradhan
 Heikki Korpela
@@ -306,6 +315,7 @@ John Crow
 John Janssen
 John Kelly
 John Lask
+John Lightsey
 John McGowan
 Johnny Luong
 Jon Grubbs
@@ -366,6 +376,7 @@ Lau Hang Kin
 Legoff Vincent
 Lehel Bernadt
 Len Krause
+Lenny Rachitsky
 Liam Healy
 Linas Vepstas
 Ling Thio
@@ -480,6 +491,7 @@ Pete Su
 Peter Bray
 Peter Forret
 Peter Heuchert
+Peter Lamberg
 Peter O'Gorman
 Peter Pentchev
 Peter Silva
@@ -489,7 +501,9 @@ Peter Todd
 Peter Verhas
 Peter Wullinger
 Peteris Krumins
+Phil Blundell
 Phil Karn
+Phil Pellouchoud
 Philip Gladstone
 Philip Langdale
 Philippe Hameau
@@ -497,6 +511,7 @@ Philippe Raoult
 Philippe Vaucher
 Pierre
 Pooyan McSporran
+Pramod Sharma
 Puneet Pawaia
 Quagmire
 Rafa Muyo
@@ -541,6 +556,7 @@ Rodney Simmons
 Roland Blom
 Roland Krikava
 Roland Zimmermann
+Rolland Dudemaine
 Roman Koifman
 Ron Zapp
 Rosimildo da Silva
@@ -636,6 +652,7 @@ Victor Snezhko
 Vikram Saxena
 Vilmos Nebehaj
 Vincent Bronner
+Vincent Le Normand
 Vincent Penquerc'h
 Vincent Sanders
 Vladimir Lazarenko
@@ -651,6 +668,7 @@ Wojciech Zwiefka
 Xavier Bouchoux
 Yang Tse
 Yarram Sunil
+Yehoshua Hershberg
 Yuriy Sosov
 Yves Lejeune
 Zmey Petroff

docs/TODO

@@ -18,6 +18,7 @@
  1.4 Get IP address
  1.5 c-ares ipv6
  1.6 configure-based info in public headers
+ 1.7 signal-based resolver timeouts
 
  2. libcurl - multi interface
  2.1 More non-blocking
@@ -50,7 +51,7 @@
 
  7. SSL
  7.1 Disable specific versions
- 7.2 Provide mytex locking API
+ 7.2 Provide mutex locking API
  7.3 dumpcert
  7.4 Evaluate SSL patches
  7.5 Cache OpenSSL contexts
@@ -152,7 +153,7 @@
  know MUST have it. This is error-prone. We therefore want the header files to
  adapt to configure results. Those results must be stored in a new header and
  they must use a curl name space, i.e not be HAVE_* prefix (as that would risk
- collide with other apps that use libcurl and that runs configure).
+ a collision with other apps that use libcurl and that runs configure).
 
  Work on this has been started but hasn't been finished, and the initial patch
  and some details are found here:
@@ -161,11 +162,23 @@
  The remaining problems to solve involve the platforms that can't run
  configure.
 
+1.7 signal-based resolver timeouts
+
+ libcurl built without an asynchronous resolver library uses alarm() to time
+ out DNS lookups. When a timeout occurs, this causes libcurl to jump from the
+ signal handler back into the library with a sigsetjmp, which effectively 
+ causes libcurl to continue running within the signal handler. This is
+ non-portable and could cause problems on some platforms. A discussion on the
+ problem is available at http://curl.haxx.se/mail/lib-2008-09/0197.html
+
+ Also, alarm() provides timeout resolution only to the nearest second. alarm
+ ought to be replaced by setitimer on systems that support it.
+
 2. libcurl - multi interface
 
 2.1 More non-blocking
 
- Make sure we don't ever loop because of non-blocking sockets return
+ Make sure we don't ever loop because of non-blocking sockets returning
  EWOULDBLOCK or similar. The GnuTLS connection etc.
 
 2.2 Pause transfers
@@ -304,7 +317,7 @@ to provide the data to send.
  Provide an option that allows for disabling specific SSL versions, such as
  SSLv2 http://curl.haxx.se/bug/feature.cgi?id=1767276
 
-7.2 Provide mytex locking API
+7.2 Provide mutex locking API
 
  Provide a libcurl API for setting mutex callbacks in the underlying SSL
  library, so that the same application code can use mutex-locking

docs/curl.1

@@ -34,7 +34,7 @@ protocols (HTTP, HTTPS, FTP, FTPS, SCP, SFTP, TFTP, DICT, TELNET, LDAP or
 FILE).  The command is designed to work without user interaction.
 
 curl offers a busload of useful tricks like proxy support, user
-authentication, ftp upload, HTTP post, SSL connections, cookies, file transfer
+authentication, FTP upload, HTTP post, SSL connections, cookies, file transfer
 resume and more. As you will see below, the number of features will make your
 head spin!
 
@@ -42,7 +42,7 @@ curl is powered by libcurl for all transfer-related features. See
 .BR libcurl (3)
 for details.
 .SH URL
-The URL syntax is protocol dependent. You'll find a detailed description in
+The URL syntax is protocol-dependent. You'll find a detailed description in
 RFC 3986.
 
 You can specify multiple URLs or parts of URLs by writing part sets within
@@ -64,7 +64,7 @@ several ones next to each other:
 You can specify any amount of URLs on the command line. They will be fetched
 in a sequential manner in the specified order.
 
-Since curl 7.15.1 you can also specify step counter for the ranges, so that
+Since curl 7.15.1 you can also specify a step counter for the ranges, so that
 you can get every Nth number or letter:
 
  http://www.numericals.com/file[1-100:10].txt
@@ -81,10 +81,10 @@ handshakes. This improves speed. Of course this is only done on files
 specified on a single command line and cannot be used between separate curl
 invokes.
 .SH "PROGRESS METER"
-curl normally displays a progress meter during operations, indicating amount
-of transferred data, transfer speeds and estimated time left etc.
+curl normally displays a progress meter during operations, indicating the amount
+of transferred data, transfer speeds and estimated time left, etc.
 
-However, since curl displays data to the terminal by default, if you invoke
+However, since curl displays this data to the terminal by default, if you invoke
 curl to do an operation and it is about to write data to the terminal, it
 \fIdisables\fP the progress meter as otherwise it would mess up the output
 mixing progress meter and response data.
@@ -93,7 +93,7 @@ If you want a progress meter for HTTP POST or PUT requests, you need to
 redirect the response output to a file, using shell redirect (>), -o [file] or
 similar.
 
-It is not the same case for FTP upload as that operation is not spitting out
+It is not the same case for FTP upload as that operation does not spit out
 any response data to the terminal.
 
 If you prefer a progress "bar" instead of the regular meter, \fI-#\fP is your
@@ -119,7 +119,7 @@ If this option is set more than once, the last one will be the one that's
 used.
 .IP "--anyauth"
 (HTTP) Tells curl to figure out authentication method by itself, and use the
-most secure one the remote site claims it supports. This is done by first
+most secure one the remote site claims to support. This is done by first
 doing a request and checking the response-headers, thus possibly inducing an
 extra network round-trip. This is used instead of setting a specific
 authentication method, which you can do with \fI--basic\fP, \fI--digest\fP,
@@ -158,10 +158,10 @@ sent to stdout to be in text mode for win32 systems.
 (HTTP) Tells curl to use HTTP Basic authentication. This is the default and
 this option is usually pointless, unless you use it to override a previously
 set option that sets a different authentication method (such as \fI--ntlm\fP,
-\fI--digest\fP and \fI--negotiate\fP).
+\fI--digest\fP, or \fI--negotiate\fP).
 .IP "--ciphers <list of ciphers>"
 (SSL) Specifies which ciphers to use in the connection. The list of ciphers
-must be using valid ciphers. Read up on SSL cipher list details on this URL:
+must specify valid ciphers. Read up on SSL cipher list details on this URL:
 \fIhttp://www.openssl.org/docs/apps/ciphers.html\fP
 
 NSS ciphers are done differently than OpenSSL and GnuTLS. The full list of
@@ -199,7 +199,7 @@ used.
 Continue/Resume a previous file transfer at the given offset. The given offset
 is the exact number of bytes that will be skipped counted from the beginning
 of the source file before it is transferred to the destination.  If used with
-uploads, the ftp server command SIZE will not be used by curl.
+uploads, the FTP server command SIZE will not be used by curl.
 
 Use "-C -" to tell curl to automatically find out where/how to resume the
 transfer. It then uses the given output/input files to figure that out.
@@ -223,7 +223,7 @@ using the content-type application/x-www-form-urlencoded.  Compare to
 \fI-F/--form\fP.
 
 \fI-d/--data\fP is the same as \fI--data-ascii\fP. To post data purely binary,
-you should instead use the \fI--data-binary\fP option. To URL encode the value
+you should instead use the \fI--data-binary\fP option. To URL-encode the value
 of a form field you may use \fI--data-urlencode\fP.
 
 If any of these options is used more than once on the same command line, the
@@ -233,7 +233,7 @@ chunk that looks like \&'name=daniel&skill=lousy'.
 
 If you start the data with the letter @, the rest should be a file name to
 read the data from, or - if you want curl to read the data from stdin.  The
-contents of the file must already be url-encoded. Multiple files can also be
+contents of the file must already be URL-encoded. Multiple files can also be
 specified. Posting data from a file named 'foobar' would thus be done with
 \fI--data @foobar\fP.
 .IP "--data-binary <data>"
@@ -245,33 +245,33 @@ is posted in a similar manner as \fI--data-ascii\fP does, except that newlines
 are preserved and conversions are never done.
 
 If this option is used several times, the ones following the first will append
-data. As described in \fI-d/--data\fP.
+data as described in \fI-d/--data\fP.
 .IP "--data-urlencode <data>"
 (HTTP) This posts data, similar to the other --data options with the exception
-that this performs URL encoding. (Added in 7.18.0)
+that this performs URL-encoding. (Added in 7.18.0)
 
-To be CGI compliant, the <data> part should begin with a \fIname\fP followed
+To be CGI-compliant, the <data> part should begin with a \fIname\fP followed
 by a separator and a content specification. The <data> part can be passed to
 curl using one of the following syntaxes:
 .RS
 .IP "content"
-This will make curl URL encode the content and pass that on. Just be careful
+This will make curl URL-encode the content and pass that on. Just be careful
 so that the content doesn't contain any = or @ letters, as that will then make
 the syntax match one of the other cases below!
 .IP "=content"
-This will make curl URL encode the content and pass that on. The preceding =
+This will make curl URL-encode the content and pass that on. The preceding =
 letter is not included in the data.
 .IP "name=content"
-This will make curl URL encode the content part and pass that on. Note that
-the name part is expected to be URL encoded already.
+This will make curl URL-encode the content part and pass that on. Note that
+the name part is expected to be URL-encoded already.
 .IP "@filename"
 This will make curl load data from the given file (including any newlines),
-URL encode that data and pass it on in the POST.
+URL-encode that data and pass it on in the POST.
 .IP "name@filename"
 This will make curl load data from the given file (including any newlines),
-URL encode that data and pass it on in the POST. The name part gets an equal
+URL-encode that data and pass it on in the POST. The name part gets an equal
 sign appended, resulting in \fIname=urlencoded-file-content\fP. Note that the
-name is expected to be URL encoded already.
+name is expected to be URL-encoded already.
 .RE
 .IP "--digest"
 (HTTP) Enables HTTP Digest authentication. This is a authentication that
@@ -304,10 +304,10 @@ Write the protocol headers to the specified file.
 
 This option is handy to use when you want to store the headers that a HTTP
 site sends to you. Cookies from the headers could then be read in a second
-curl invoke by using the \fI-b/--cookie\fP option! The \fI-c/--cookie-jar\fP
+curl invocation by using the \fI-b/--cookie\fP option! The \fI-c/--cookie-jar\fP
 option is however a better way to store cookies.
 
-When used on FTP, the ftp server response lines are considered being "headers"
+When used in FTP, the FTP server response lines are considered being "headers"
 and thus are saved there.
 
 If this option is used several times, the last one will be used.
@@ -358,7 +358,7 @@ file may contain multiple CA certificates. The certificate(s) must be in PEM
 format. Normally curl is built to use a default file for this, so this option
 is typically used to alter that default file.
 
-curl recognizes the environment variable named 'CURL_CA_BUNDLE' if that is
+curl recognizes the environment variable named 'CURL_CA_BUNDLE' if it is
 set, and uses the given path as a path to a CA cert bundle. This option
 overrides that variable.
 
@@ -384,7 +384,7 @@ certificates.
 If this option is used several times, the last one will be used.
 .IP "-f/--fail"
 (HTTP) Fail silently (no output at all) on server errors. This is mostly done
-like this to better enable scripts etc to better deal with failed attempts. In
+to better enable scripts etc to better deal with failed attempts. In
 normal cases when a HTTP server fails to deliver a document, it returns an
 HTML document stating so (which often also describes why and more). This flag
 will prevent curl from outputting that and return error 22.
@@ -419,6 +419,7 @@ curl does one CWD with the full target directory and then operates on the file
 \&"normally" (like in the multicwd case). This is somewhat more standards
 compliant than 'nocwd' but without the full penalty of 'multicwd'.
 .RE
+(Added in 7.15.1)
 .IP "--ftp-pasv"
 (FTP) Use PASV when transferring. PASV is the internal default behavior, but
 using this option can be used to override a previous --ftp-port option. (Added
@@ -445,7 +446,7 @@ connection if the server doesn't support SSL/TLS.  See also
 \fI--ftp-ssl-control\fP and \fI--ftp-ssl-reqd\fP for different levels of
 encryption required. (Added in 7.11.0)
 .IP "--ftp-ssl-control"
-(FTP) Require SSL/TLS for the ftp login, clear for transfer.  Allows secure
+(FTP) Require SSL/TLS for the FTP login, clear for transfer.  Allows secure
 authentication, but non-encrypted data transfers for efficiency.  Fails the
 transfer if the server doesn't support SSL/TLS.  (Added in 7.16.0)
 .IP "--ftp-ssl-reqd"
@@ -467,7 +468,7 @@ shutdown from the server. The active mode initiates the shutdown and
 waits for a reply from the server.
 (Added in 7.16.2)
 .IP "-F/--form <name=content>"
-(HTTP) This lets curl emulate a filled in form in which a user has pressed the
+(HTTP) This lets curl emulate a filled-in form in which a user has pressed the
 submit button. This causes curl to POST data using the Content-Type
 multipart/form-data according to RFC1867. This enables uploading of binary
 files etc. To force the 'content' part to be a file, prefix the file name
@@ -517,7 +518,7 @@ contents but they should be encoded according to the URI standard.
 When used, this option will make all data specified with \fI-d/--data\fP or
 \fI--data-binary\fP to be used in a HTTP GET request instead of the POST
 request that otherwise would be used. The data will be appended to the URL
-with a '?'  separator.
+with a '?' separator.
 
 If used in combination with -I, the POST data will instead be appended to the
 URL with a HEAD request.
@@ -537,9 +538,9 @@ set headers without knowing perfectly well what you're doing. Remove an
 internal header by giving a replacement without content on the right side of
 the colon, as in: -H \&"Host:".
 
-curl will make sure that each header you add/replace get sent with the proper
-end of line marker, you should thus \fBnot\fP add that as a part of the header
-content: do not add newlines or carriage returns they will only mess things up
+curl will make sure that each header you add/replace is sent with the proper
+end-of-line marker, you should thus \fBnot\fP add that as a part of the header
+content: do not add newlines or carriage returns, they will only mess things up
 for you.
 
 See also the \fI-A/--user-agent\fP and \fI-e/--referer\fP options.
@@ -580,7 +581,7 @@ cookies when they're closed down.
 (SSL) This option explicitly allows curl to perform "insecure" SSL connections
 and transfers. All SSL connections are attempted to be made secure by using
 the CA certificate bundle installed by default. This makes all connections
-considered "insecure" to fail unless \fI-k/--insecure\fP is used.
+considered "insecure" fail unless \fI-k/--insecure\fP is used.
 
 See this online resource for further details:
 \fBhttp://curl.haxx.se/docs/sslcerts.html\fP
@@ -599,16 +600,16 @@ separate file.
 If this option is used several times, the last one will be used.
 .IP "--key-type <type>"
 (SSL) Private key file type. Specify which type your \fI--key\fP provided
-private key is. DER, PEM and ENG are supported. If not specified, PEM is
+private key is. DER, PEM, and ENG are supported. If not specified, PEM is
 assumed.
 
 If this option is used several times, the last one will be used.
 .IP "--krb <level>"
 (FTP) Enable Kerberos authentication and use. The level must be entered and
-should be one of 'clear', 'safe', 'confidential' or 'private'. Should you use
+should be one of 'clear', 'safe', 'confidential', or 'private'. Should you use
 a level that is not one of these, 'private' will instead be used.
 
-This option requires that the library was built with kerberos4 or GSSAPI
+This option requires a library built with kerberos4 or GSSAPI
 (GSS-Negotiate) support. This is not very common. Use \fI-V/--version\fP to
 see if your curl supports it.
 
@@ -618,11 +619,11 @@ Specify which config file to read curl arguments from. The config file is a
 text file in which command line arguments can be written which then will be
 used as if they were written on the actual command line. Options and their
 parameters must be specified on the same config file line, separated by
-white space, colon, the equals sign or any combination thereof (however,
+whitespace, colon, the equals sign or any combination thereof (however,
 the preferred separator is the equals sign). If the parameter is to contain
-white spaces, the parameter must be enclosed within quotes. Within double
+whitespace, the parameter must be enclosed within quotes. Within double
 quotes, the following escape sequences are available: \\\\, \\", \\t, \\n,
-\\r and \\v. A backlash preceding any other letter is  ignored. If the
+\\r and \\v. A backslash preceding any other letter is ignored. If the
 first column of a config line is a '#' character, the rest of the line will be
 treated as a comment. Only write one option per physical line in the config
 file.
@@ -645,12 +646,12 @@ the following places in this order:
 
 1) curl tries to find the "home dir": It first checks for the CURL_HOME and
 then the HOME environment variables. Failing that, it uses getpwuid() on
-unix-like systems (which returns the home dir given the current user in your
+UNIX-like systems (which returns the home dir given the current user in your
 system). On Windows, it then checks for the APPDATA variable, or as a last
-resort the '%USERPROFILE%\Application Data'.
+resort the '%USERPROFILE%\\Application Data'.
 
 2) On windows, if there is no _curlrc file in the home dir, it checks for one
-in the same dir the executable curl is placed. On unix-like systems, it will
+in the same dir the curl executable is placed. On UNIX-like systems, it will
 simply try to load .curlrc from the determined home dir.
 
 .nf
@@ -671,7 +672,7 @@ This option can be used multiple times to load multiple config files.
 .IP "--libcurl <file>"
 Append this option to any ordinary curl command line, and you will get a
 libcurl-using source code written to the file that does the equivalent
-operation of what your command line operation does!
+of what your command-line operation does!
 
 NOTE: this does not properly support -F and the sending of multipart
 formposts, so in those cases the output program will be missing necessary
@@ -681,18 +682,18 @@ If this option is used several times, the last given file name will be
 used. (Added in 7.16.1)
 .IP "--limit-rate <speed>"
 Specify the maximum transfer rate you want curl to use. This feature is useful
-if you have a limited pipe and you'd like your transfer not use your entire
+if you have a limited pipe and you'd like your transfer not to use your entire
 bandwidth.
 
 The given speed is measured in bytes/second, unless a suffix is appended.
 Appending 'k' or 'K' will count the number as kilobytes, 'm' or M' makes it
-megabytes while 'g' or 'G' makes it gigabytes. Examples: 200K, 3m and 1G.
+megabytes, while 'g' or 'G' makes it gigabytes. Examples: 200K, 3m and 1G.
 
-The given rate is the average speed, counted during the entire transfer. It
+The given rate is the average speed counted during the entire transfer. It
 means that curl might use higher transfer speeds in short bursts, but over
 time it uses no more than the given rate.
 
-If you are also using the \fI-Y/--speed-limit\fP option, that option will take
+If you also use the \fI-Y/--speed-limit\fP option, that option will take
 precedence and might cripple the rate-limiting slightly, to help keeping the
 speed-limit logic working.
 
@@ -710,12 +711,12 @@ subdirectories and symbolic links.
 
 .IP "--local-port <num>[-num]"
 Set a preferred number or range of local port numbers to use for the
-connection(s).  Note that port numbers by nature is a scarce resource that
+connection(s).  Note that port numbers by nature are a scarce resource that
 will be busy at times so setting this range to something too narrow might
 cause unnecessary connection setup failures. (Added in 7.15.2)
 .IP "-L/--location"
 (HTTP/HTTPS) If the server reports that the requested page has moved to a
-different location (indicated with a Location: header and a 3XX response code)
+different location (indicated with a Location: header and a 3XX response code),
 this option will make curl redo the request on the new place. If used together
 with \fI-i/--include\fP or \fI-I/--head\fP, headers from all requested pages
 will be shown. When authentication is used, curl only sends its credentials to
@@ -740,7 +741,7 @@ Specify the maximum size (in bytes) of a file to download. If the file
 requested is larger than this value, the transfer will not start and curl will
 return with exit code 63.
 
-NOTE: The file size is not always known prior to download, and for such files
+\fBNOTE:\fP The file size is not always known prior to download, and for such files
 this option has no effect even if the file transfer ends up being larger than
 this given limit. This concerns both FTP and HTTP transfers.
 .IP "-m/--max-time <seconds>"
@@ -753,24 +754,24 @@ If this option is used several times, the last one will be used.
 Manual. Display the huge help text.
 .IP "-n/--netrc"
 Makes curl scan the \fI.netrc\fP (\fI_netrc\fP on Windows) file in the user's
-home directory for login name and password. This is typically used for ftp on
-unix. If used with http, curl will enable user authentication. See
+home directory for login name and password. This is typically used for FTP on
+UNIX. If used with HTTP, curl will enable user authentication. See
 .BR netrc(4)
 or
 .BR ftp(1)
 for details on the file format. Curl will not complain if that file
-hasn't the right permissions (it should not be world nor group
-readable). The environment variable "HOME" is used to find the home
+doesn't have the right permissions (it should not be either world- or
+group-readable). The environment variable "HOME" is used to find the home
 directory.
 
 A quick and very simple example of how to setup a \fI.netrc\fP to allow curl
-to ftp to the machine host.domain.com with user name \&'myself' and password
+to FTP to the machine host.domain.com with user name \&'myself' and password
 \&'secret' should look similar to:
 
 .B "machine host.domain.com login myself password secret"
 .IP "--netrc-optional"
 Very similar to \fI--netrc\fP, but this option makes the .netrc usage
-\fBoptional\fP and not mandatory as the \fI--netrc\fP does.
+\fBoptional\fP and not mandatory as the \fI--netrc\fP option does.
 .IP "--negotiate"
 (HTTP) Enables GSS-Negotiate authentication. The GSS-Negotiate method was
 designed by Microsoft and is used in their web applications. It is primarily
@@ -781,7 +782,7 @@ draft-brezak-spnego-http-04.txt.
 If you want to enable Negotiate for your proxy authentication, then use
 \fI--proxy-negotiate\fP.
 
-This option requires that the library was built with GSSAPI support. This is
+This option requires a library built with GSSAPI support. This is
 not very common. Use \fI-V/--version\fP to see if your version supports
 GSS-Negotiate.
 
@@ -807,7 +808,7 @@ Note that this is the negated option name documented. You can thus use
 \fI--keepalive\fP to enforce keepalive.
 .IP "--no-sessionid"
 (SSL) Disable curl's use of SSL session-ID caching.  By default all transfers
-are done using the cache. Note that while nothing ever should get hurt by
+are done using the cache. Note that while nothing should ever get hurt by
 attempting to reuse SSL session-IDs, there seem to be broken SSL
 implementations in the wild that may require you to disable this in order for
 you to succeed. (Added in 7.16.0)
@@ -817,15 +818,15 @@ Note that this is the negated option name documented. You can thus use
 .IP "--ntlm"
 (HTTP) Enables NTLM authentication. The NTLM authentication method was
 designed by Microsoft and is used by IIS web servers. It is a proprietary
-protocol, reversed engineered by clever people and implemented in curl based
+protocol, reverse-engineered by clever people and implemented in curl based
 on their efforts. This kind of behavior should not be endorsed, you should
 encourage everyone who uses NTLM to switch to a public and documented
-authentication method instead. Such as Digest.
+authentication method instead, such as Digest.
 
 If you want to enable NTLM for your proxy authentication, then use
 \fI--proxy-ntlm\fP.
 
-This option requires that the library was built with SSL support. Use
+This option requires a library built with SSL support. Use
 \fI-V/--version\fP to see if your curl supports NTLM.
 
 If this option is used several times, the following occurrences make no
@@ -842,7 +843,7 @@ or use several variables like:
 
   curl http://{site,host}.host[1-5].com -o "#1_#2"
 
-You may use this option as many times as you have number of URLs.
+You may use this option as many times as the number of URLs you have.
 
 See also the \fI--create-dirs\fP option to create the local directories
 dynamically.
@@ -853,23 +854,30 @@ part of the remote file is used, the path is cut off.)
 The remote file name to use for saving is extracted from the given URL,
 nothing else.
 
-You may use this option as many times as you have number of URLs.
+You may use this option as many times as the number of URLs you have.
 .IP "--remote-name-all"
 This option changes the default action for all given URLs to be dealt with as
 if \fI-O/--remote-name\fP were used for each one. So if you want to disable
 that for a specific URL after \fI--remote-name-all\fP has been used, you must
 use "-o -" or \fI--no-remote-name\fP. (Added in 7.19.0)
 .IP "--pass <phrase>"
-(SSL/SSH) Pass phrase for the private key
+(SSL/SSH) Passphrase for the private key
 
 If this option is used several times, the last one will be used.
 .IP "--post301"
 Tells curl to respect RFC 2616/10.3.2 and not convert POST requests into GET
 requests when following a 301 redirection. The non-RFC behaviour is ubiquitous
 in web browsers, so curl does the conversion by default to maintain
-consistency. However, a server may requires a POST to remain a POST after such
+consistency. However, a server may require a POST to remain a POST after such
 a redirection. This option is meaningful only when using \fI-L/--location\fP
 (Added in 7.17.1)
+.IP "--post302"
+Tells curl to respect RFC 2616/10.3.2 and not convert POST requests into GET
+requests when following a 302 redirection. The non-RFC behaviour is ubiquitous
+in web browsers, so curl does the conversion by default to maintain
+consistency. However, a server may requires a POST to remain a POST after such
+a redirection. This option is meaningful only when using \fI-L/--location\fP
+(Added in 7.19.1)
 .IP "--proxy-anyauth"
 Tells curl to pick a suitable authentication method when communicating with
 the given proxy. This might cause an extra request/response round-trip. (Added
@@ -900,18 +908,18 @@ separate file.
 
 If this option is used several times, the last one will be used.
 .IP "-P/--ftp-port <address>"
-(FTP) Reverses the initiator/listener roles when connecting with ftp. This
-switch makes Curl use the PORT command instead of PASV. In practise, PORT
+(FTP) Reverses the initiator/listener roles when connecting with FTP. This
+switch makes Curl use the PORT command instead of PASV. In practice, PORT
 tells the server to connect to the client's specified address and port, while
-PASV asks the server for an ip address and port to connect to. <address>
+PASV asks the server for an IP address and port to connect to. <address>
 should be one of:
 .RS
 .IP interface
-i.e "eth0" to specify which interface's IP address you want to use  (Unix only)
+i.e "eth0" to specify which interface's IP address you want to use (Unix only)
 .IP "IP address"
-i.e "192.168.10.1" to specify exact IP number
+i.e "192.168.10.1" to specify the exact IP address
 .IP "host name"
-i.e "my.host.domain" to specify machine
+i.e "my.host.domain" to specify the machine
 .IP "-"
 make curl pick the same IP address that is already used for the control
 connection
@@ -926,11 +934,11 @@ file will not be read and used. See the \fI-K/--config\fP for details on the
 default config file search path.
 .IP "-Q/--quote <command>"
 (FTP/SFTP) Send an arbitrary command to the remote FTP or SFTP server. Quote
-commands are sent BEFORE the transfer is taking place (just after the
+commands are sent BEFORE the transfer takes place (just after the
 initial PWD command in an FTP transfer, to be exact). To make commands
 take place after a successful transfer, prefix them with a dash '-'.
-To make commands get sent after libcurl has changed working directory,
-just before the transfer command(s), prefix the command with '+' (this
+To make commands be sent after libcurl has changed the working directory,
+just before the transfer command(s), prefix the command with a '+' (this
 is only supported for FTP). You may specify any number of commands. If
 the server returns failure for one of the commands, the entire operation
 will be aborted. You must send syntactically correct FTP commands as
@@ -975,9 +983,9 @@ See ln.
 random data. The data is used to seed the random engine for SSL connections.
 See also the \fI--egd-file\fP option.
 .IP "-r/--range <range>"
-(HTTP/FTP/FILE) Retrieve a byte range (i.e a partial document) from a
-HTTP/1.1, FTP server or a local FILE. Ranges can be specified in a number of
-ways.
+(HTTP/FTP/SFTP/FILE) Retrieve a byte range (i.e a partial document) from a
+HTTP/1.1, FTP or SFTP server or a local FILE. Ranges can be specified
+in a number of ways.
 .RS
 .TP 10
 .B 0-499
@@ -999,22 +1007,23 @@ specifies the first and last byte only(*)(H)
 specifies 300 bytes from offset 500(H)
 .TP
 .B 100-199,500-599
-specifies two separate 100 bytes ranges(*)(H)
+specifies two separate 100-byte ranges(*)(H)
 .RE
 
 (*) = NOTE that this will cause the server to reply with a multipart
 response!
 
-Only digit characters (0-9) are valid in 'start' and 'stop' of range syntax
-\&'start-stop'. If a non-digit character is given in the range, the server's
-response will be indeterminable, depending on different server's configuration.
+Only digit characters (0-9) are valid in the 'start' and 'stop' fields of
+the \&'start-stop' range syntax. If a non-digit character is given in the range, the server's
+response will be unspecified, depending on the server's configuration.
 
 You should also be aware that many HTTP/1.1 servers do not have this feature
 enabled, so that when you attempt to get a range, you'll instead get the whole
 document.
 
-FTP range downloads only support the simple syntax 'start-stop' (optionally
-with one of the numbers omitted). It depends on the non-RFC command SIZE.
+FTP and SFTP range downloads only support the simple 'start-stop' syntax
+(optionally with one of the numbers omitted). FTP use depends on the extended
+FTP command SIZE.
 
 If this option is used several times, the last one will be used.
 .IP "--raw"
@@ -1039,13 +1048,13 @@ retries. (Added in 7.12.3)
 
 If this option is used multiple times, the last occurrence decide the amount.
 .IP "--retry-delay <seconds>"
-Make curl sleep this amount of time between each retry when a transfer has
+Make curl sleep this amount of time before each retry when a transfer has
 failed with a transient error (it changes the default backoff time algorithm
 between retries). This option is only interesting if \fI--retry\fP is also
 used. Setting this delay to zero will make curl use the default backoff time.
 (Added in 7.12.3)
 
-If this option is used multiple times, the last occurrence decide the amount.
+If this option is used multiple times, the last occurrence determines the amount.
 .IP "--retry-max-time <seconds>"
 The retry timer is reset before the first transfer attempt. Retries will be
 done as usual (see \fI--retry\fP) as long as the timer hasn't reached this
@@ -1054,12 +1063,13 @@ will be made and while performing, it may take longer than this given time
 period. To limit a single request\'s maximum time, use \fI-m/--max-time\fP.
 Set this option to zero to not timeout retries. (Added in 7.12.3)
 
-If this option is used multiple times, the last occurrence decide the amount.
+If this option is used multiple times, the last occurrence determines the
+amount.
 .IP "-s/--silent"
 Silent mode. Don't show progress meter or error messages.  Makes
 Curl mute.
 .IP "-S/--show-error"
-When used with -s it makes curl show error message if it fails.
+When used with -s it makes curl show an error message if it fails.
 .IP "--socks4 <host[:port]>"
 Use the specified SOCKS4 proxy. If the port number is not specified, it is
 assumed at port 1080. (Added in 7.15.2)
@@ -1120,7 +1130,7 @@ part in the specified URL, Curl will append the local file name. NOTE that you
 must use a trailing / on the last directory to really prove to Curl that there
 is no file name or curl will think that your last directory name is the remote
 file name to use. That will most likely cause the upload operation to fail. If
-this is used on a http(s) server, the PUT command will be used.
+this is used on a HTTP(S) server, the PUT command will be used.
 
 Use the file name "-" (a single dash) to use stdin instead of a given file.
 
@@ -1159,7 +1169,7 @@ If this option is used several times, the last one will be used.
 Prepends a time stamp to each trace or verbose line that curl displays.
 (Added in 7.14.0)
 .IP "-u/--user <user:password>"
-Specify user and password to use for server authentication. Overrides
+Specify the user name and password to use for server authentication. Overrides
 \fI-n/--netrc\fP and \fI--netrc-optional\fP.
 
 If you just give the user name (without entering a colon) curl will prompt for
@@ -1171,7 +1181,7 @@ simply specifying a single colon with this option: "-u :".
 
 If this option is used several times, the last one will be used.
 .IP "-U/--proxy-user <user:password>"
-Specify user and password to use for proxy authentication.
+Specify the user name and password to use for proxy authentication.
 
 If you use an SSPI-enabled curl binary and do NTLM authentication, you can
 force curl to pick up the user name and password from your environment by
@@ -1185,9 +1195,9 @@ URL(s) in a config file.
 This option may be used any number of times. To control where this URL is
 written, use the \fI-o/--output\fP or the \fI-O/--remote-name\fP options.
 .IP "-v/--verbose"
-Makes the fetching more verbose/talkative. Mostly usable for debugging. Lines
+Makes the fetching more verbose/talkative. Mostly useful for debugging. A line
 starting with '>' means "header data" sent by curl, '<' means "header data"
-received by curl that is hidden in normal cases and lines starting with '*'
+received by curl that is hidden in normal cases, and a line starting with '*'
 means additional info provided by curl.
 
 Note that if you only want HTTP headers in the output, \fI-i/--include\fP
@@ -1212,7 +1222,7 @@ reports to offer. Available features include:
 .IP "IPv6"
 You can use IPv6 with this.
 .IP "krb4"
-Krb4 for ftp is supported.
+Krb4 for FTP is supported.
 .IP "SSL"
 HTTPS and FTPS are supported.
 .IP "libz"
@@ -1220,7 +1230,7 @@ Automatic decompression of compressed files over HTTP is supported.
 .IP "NTLM"
 NTLM authentication is supported.
 .IP "GSS-Negotiate"
-Negotiate authentication and krb5 for ftp is supported.
+Negotiate authentication and krb5 for FTP is supported.
 .IP "Debug"
 This curl uses a libcurl built with Debug. This enables more error-tracking
 and memory debugging etc. For curl-developers only!
@@ -1245,7 +1255,7 @@ format from stdin you write "@-".
 
 The variables present in the output format will be substituted by the value or
 text that curl thinks fit, as described below. All variables are specified
-like %{variable_name} and to output a normal % you just write them like
+as %{variable_name} and to output a normal % you just it them as
 %%. You can output a newline by using \\n, a carriage return with \\r and a tab
 space with \\t.
 
@@ -1253,11 +1263,11 @@ space with \\t.
 The %-letter is a special letter in the win32-environment, where all
 occurrences of % must be doubled when using this option.
 
-Available variables are at this point:
+The variables available at this point are:
 .RS
 .TP 15
 .B url_effective
-The URL that was fetched last. This is mostly meaningful if you've told curl
+The URL that was fetched last. This is most meaningful if you've told curl
 to follow location: headers.
 .TP
 .B http_code
@@ -1286,20 +1296,20 @@ The time, in seconds, it took from the start until the SSL/SSH/etc
 connect/handshake to the remote host was completed. (Added in 7.19.0)
 .TP
 .B time_pretransfer
-The time, in seconds, it took from the start until the file transfer is just
+The time, in seconds, it took from the start until the file transfer was just
 about to begin. This includes all pre-transfer commands and negotiations that
 are specific to the particular protocol(s) involved.
 .TP
 .B time_redirect
 The time, in seconds, it took for all redirection steps include name lookup,
-connect, pretransfer and transfer before final transaction was
+connect, pretransfer and transfer before the final transaction was
 started. time_redirect shows the complete execution time for multiple
 redirections. (Added in 7.12.3)
 .TP
 .B time_starttransfer
-The time, in seconds, it took from the start until the first byte is just about
+The time, in seconds, it took from the start until the first byte was just about
 to be transferred. This includes time_pretransfer and also the time the
-server needs to calculate the result.
+server needed to calculate the result.
 .TP
 .B size_download
 The total amount of bytes that were downloaded.
@@ -1343,10 +1353,10 @@ means the verification was successful. (Added in 7.19.0)
 
 If this option is used several times, the last one will be used.
 .IP "-x/--proxy <proxyhost[:port]>"
-Use specified HTTP proxy. If the port number is not specified, it is assumed
+Use the specified HTTP proxy. If the port number is not specified, it is assumed
 at port 1080.
 
-This option overrides existing environment variables that sets proxy to
+This option overrides existing environment variables that set the proxy to
 use. If there's an environment variable setting a proxy, you can set proxy to
 \&"" to override it.
 
@@ -1356,8 +1366,8 @@ operations might not be available. This is not the case if you can tunnel
 through the proxy, as done with the \fI-p/--proxytunnel\fP option.
 
 Starting with 7.14.1, the proxy host can be specified the exact same way as
-the proxy environment variables, include protocol prefix (http://) and
-embedded user + password.
+the proxy environment variables, including the protocol prefix (http://) and
+the embedded user + password.
 
 If this option is used several times, the last one will be used.
 .IP "-X/--request <command>"
@@ -1368,21 +1378,21 @@ details and explanations.
 
 (FTP)
 Specifies a custom FTP command to use instead of LIST when doing file lists
-with ftp.
+with FTP.
 
 If this option is used several times, the last one will be used.
 .IP "-y/--speed-time <time>"
 If a download is slower than speed-limit bytes per second during a speed-time
 period, the download gets aborted. If speed-time is used, the default
-speed-limit will be 1 unless set with -y.
+speed-limit will be 1 unless set with -Y.
 
 This option controls transfers and thus will not affect slow connects etc. If
 this is a concern for you, try the \fI--connect-timeout\fP option.
 
 If this option is used several times, the last one will be used.
 .IP "-Y/--speed-limit <speed>"
-If a download is slower than this given speed, in bytes per second, for
-speed-time seconds it gets aborted. speed-time is set with -Y and is 30 if
+If a download is slower than this given speed (in bytes per second) for
+speed-time seconds it gets aborted. speed-time is set with -y and is 30 if
 not set.
 
 If this option is used several times, the last one will be used.
@@ -1410,7 +1420,7 @@ If this option is used several times, the last one will be used.
 internally preferred: HTTP 1.1.
 .IP "-1/--tlsv1"
 (SSL)
-Forces curl to use TSL version 1 when negotiating with a remote TLS server.
+Forces curl to use TLS version 1 when negotiating with a remote TLS server.
 .IP "-2/--sslv2"
 (SSL)
 Forces curl to use SSL version 2 when negotiating with a remote SSL server.
@@ -1419,11 +1429,11 @@ Forces curl to use SSL version 2 when negotiating with a remote SSL server.
 Forces curl to use SSL version 3 when negotiating with a remote SSL server.
 .IP "-4/--ipv4"
 If libcurl is capable of resolving an address to multiple IP versions (which
-it is if it is ipv6-capable), this option tells libcurl to resolve names to
+it is if it is IPv6-capable), this option tells libcurl to resolve names to
 IPv4 addresses only.
 .IP "-6/--ipv6"
 If libcurl is capable of resolving an address to multiple IP versions (which
-it is if it is ipv6-capable), this option tells libcurl to resolve names to
+it is if it is IPv6-capable), this option tells libcurl to resolve names to
 IPv6 addresses only.
 .IP "-#/--progress-bar"
 Make curl display progress information as a progress bar instead of the
@@ -1435,13 +1445,13 @@ Default config file, see \fI-K/--config\fP for details.
 
 .SH ENVIRONMENT
 .IP "http_proxy [protocol://]<host>[:port]"
-Sets proxy server to use for HTTP.
+Sets the proxy server to use for HTTP.
 .IP "HTTPS_PROXY [protocol://]<host>[:port]"
-Sets proxy server to use for HTTPS.
+Sets the proxy server to use for HTTPS.
 .IP "FTP_PROXY [protocol://]<host>[:port]"
-Sets proxy server to use for FTP.
+Sets the proxy server to use for FTP.
 .IP "ALL_PROXY [protocol://]<host>[:port]"
-Sets proxy server to use if no protocol-specific proxy is set.
+Sets the proxy server to use if no protocol-specific proxy is set.
 .IP "NO_PROXY <comma-separated list of hosts>"
 list of host names that shouldn't go through any proxy. If set to a asterisk
 \&'*' only, it matches all hosts.
@@ -1565,7 +1575,7 @@ Sending the data requires a rewind that failed
 .IP 66
 Failed to initialise SSL Engine
 .IP 67
-User, password or similar was not accepted and curl failed to login
+The user name, password, or similar was not accepted and curl failed to log in
 .IP 68
 File not found on TFTP server
 .IP 69
@@ -1597,7 +1607,7 @@ Could not load CRL file, missing or wrong format (added in 7.19.0)
 .IP 83
 Issuer check failed (added in 7.19.0)
 .IP XX
-There will appear more error codes here in future releases. The existing ones
+More error codes will appear here in future releases. The existing ones
 are meant to never change.
 .SH AUTHORS / CONTRIBUTORS
 Daniel Stenberg is the main author, but the whole list of contributors is

docs/examples/10-at-a-time.c

@@ -113,7 +113,7 @@ int main(void)
 
   /* we can optionally limit the total amount of connections this multi handle
      uses */
-  curl_multi_setopt(cm, CURLMOPT_MAXCONNECTS, MAX);
+  curl_multi_setopt(cm, CURLMOPT_MAXCONNECTS, (long)MAX);
 
   for (C = 0; C < MAX; ++C) {
     init(cm, C);

docs/examples/Makefile.inc

@@ -5,7 +5,7 @@ check_PROGRAMS = 10-at-a-time anyauthput cookie_interface \
   https multi-app multi-debugcallback multi-double \
   multi-post multi-single persistant post-callback \
   postit2 sepheaders simple simplepost simplessl \
-  sendrecv httpcustomheader
+  sendrecv httpcustomheader certinfo
 
 # These examples require external dependencies that may not be commonly
 # available on POSIX systems, so don't bother attempting to compile them here.
@@ -14,4 +14,3 @@ COMPLICATED_EXAMPLES = \
  ghiper.c hiperfifo.c htmltidy.c multithread.c \
  opensslthreadlock.c sampleconv.c synctime.c threaded-ssl.c
 
-

docs/examples/certinfo.c

@@ -0,0 +1,62 @@
+/*****************************************************************************
+ */
+
+#include <stdio.h>
+
+#include <curl/curl.h>
+#include <curl/types.h>
+#include <curl/easy.h>
+
+static size_t wrfu(void *ptr,  size_t  size,  size_t  nmemb,  void *stream)
+{
+  return size * nmemb;
+}
+int main(int argc, char **argv)
+{
+  CURL *curl;
+  CURLcode res;
+
+  curl_global_init(CURL_GLOBAL_DEFAULT);
+
+  curl = curl_easy_init();
+  if(curl) {
+    curl_easy_setopt(curl, CURLOPT_URL, "https://www.networking4all.com/");
+
+    curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, wrfu);
+
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L);
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
+
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, 0L);
+    curl_easy_setopt(curl, CURLOPT_CERTINFO, 1L);
+
+    res = curl_easy_perform(curl);
+
+    if(!res) {
+      struct curl_certinfo *ci = NULL;
+
+      res = curl_easy_getinfo(curl, CURLINFO_CERTINFO, &ci);
+
+      if(!res && ci) {
+        int i;
+        printf("%d certs!\n", ci->num_of_certs);
+
+        for(i=0; i<ci->num_of_certs; i++) {
+          struct curl_slist *slist;
+
+          for(slist = ci->certinfo[i]; slist; slist = slist->next)
+            printf("%s\n", slist->data);
+
+        }
+      }
+
+    }
+
+
+    curl_easy_cleanup(curl);
+  }
+
+  curl_global_cleanup();
+
+  return 0;
+}

docs/examples/curlx.c

@@ -281,7 +281,7 @@ int main(int argc, char **argv) {
   struct curl_slist * headers=NULL;
   int badarg=0;
 
-  binaryptr=(char*)malloc(tabLength);
+  binaryptr = malloc(tabLength);
 
   p.verbose = 0;
   p.errorbio = BIO_new_fp (stderr, BIO_NOCLOSE);
@@ -404,7 +404,7 @@ int main(int argc, char **argv) {
   /* determine URL to go */
 
   if (hostporturl) {
-    serverurl=(char*) malloc(9+strlen(hostporturl));
+    serverurl = malloc(9+strlen(hostporturl));
     sprintf(serverurl,"https://%s",hostporturl);
   }
   else if (p.accesstype != 0) { /* see whether we can find an AIA or SIA for a given access type */
@@ -442,7 +442,7 @@ int main(int argc, char **argv) {
 
   /* pass our list of custom made headers */
 
-  contenttype=(char*) malloc(15+strlen(mimetype));
+  contenttype = malloc(15+strlen(mimetype));
   sprintf(contenttype,"Content-type: %s",mimetype);
   headers = curl_slist_append(headers,contenttype);
   curl_easy_setopt(p.curl, CURLOPT_HTTPHEADER, headers);
@@ -469,7 +469,7 @@ int main(int argc, char **argv) {
       i+=lu;
       if (i== tabLength) {
         tabLength+=100;
-        binaryptr=(char*)realloc(binaryptr,tabLength); /* should be more careful */
+        binaryptr=realloc(binaryptr,tabLength); /* should be more careful */
       }
     }
     tabLength = i;

docs/examples/fileupload.c

@@ -27,7 +27,11 @@ int main(void)
     return 1; /* can't continue */
   }
 
-  stat("debugit", &file_info); /* to get the file size */
+  /* to get the file size */
+  if(fstat(fileno(fd), &file_info) != 0) {
+
+    return 1; /* can't continue */
+  }
 
   curl = curl_easy_init();
   if(curl) {

docs/examples/fopen.c

@@ -221,7 +221,7 @@ url_fopen(const char *url,const char *operation)
     URL_FILE *file;
     (void)operation;
 
-    file = (URL_FILE *)malloc(sizeof(URL_FILE));
+    file = malloc(sizeof(URL_FILE));
     if(!file)
         return NULL;
 

docs/examples/getinmemory.c

@@ -26,6 +26,8 @@ struct MemoryStruct {
   size_t size;
 };
 
+static void *myrealloc(void *ptr, size_t size);
+
 static void *myrealloc(void *ptr, size_t size)
 {
   /* There might be a realloc() out there that doesn't like reallocing
@@ -42,7 +44,7 @@ WriteMemoryCallback(void *ptr, size_t size, size_t nmemb, void *data)
   size_t realsize = size * nmemb;
   struct MemoryStruct *mem = (struct MemoryStruct *)data;
 
-  mem->memory = (char *)myrealloc(mem->memory, mem->size + realsize + 1);
+  mem->memory = myrealloc(mem->memory, mem->size + realsize + 1);
   if (mem->memory) {
     memcpy(&(mem->memory[mem->size]), ptr, realsize);
     mem->size += realsize;

docs/examples/opensslthreadlock.c

@@ -56,7 +56,7 @@ int thread_setup(void)
 {
   int i;
 
-  mutex_buf = (MUTEX_TYPE *)malloc(CRYPTO_num_locks(  ) * sizeof(MUTEX_TYPE));
+  mutex_buf = malloc(CRYPTO_num_locks(  ) * sizeof(MUTEX_TYPE));
   if (!mutex_buf)
     return 0;
   for (i = 0;  i < CRYPTO_num_locks(  );  i++)

docs/libcurl/curl_easy_getinfo.3

@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH curl_easy_getinfo 3 "21 Mar 2006" "libcurl 7.15.4" "libcurl Manual"
+.TH curl_easy_getinfo 3 "16 Oct 2008" "libcurl 7.19.1" "libcurl Manual"
 .SH NAME
 curl_easy_getinfo - extract information from a curl handle
 .SH SYNOPSIS
@@ -190,6 +190,16 @@ Pass a pointer to a 'char *' to receive a pointer to a string holding the path
 of the entry path. That is the initial path libcurl ended up in when logging
 on to the remote FTP server. This stores a NULL as pointer if something is
 wrong. (Added in 7.15.4)
+.IP CURLINFO_CERTINFO
+Pass a pointer to a 'struct curl_certinfo *' and you'll get it set to point to
+struct that holds a number of linked lists with info about the certificate
+chain, assuming you had CURLOPT_CERTINFO enabled when the previous request was
+done. The struct reports how many certs it found and then you can extract info
+for each of those certs by following the linked lists. The info chain is
+provided in a series of data in the format "name:content" where the content is
+for the specific named data. See also the certinfo.c example. NOTE: this
+option is only available in libcurl built with OpenSSL support. (Added in
+7.19.1)
 .SH TIMES
 .NF
 An overview of the six time values available from curl_easy_getinfo()

docs/libcurl/curl_easy_pause.3

@@ -12,7 +12,7 @@ curl_easy_pause - pause and unpause a connection
 Using this function, you can explicitly mark a running connection to get
 paused, and you can unpause a connection that was previously paused.
 
-A connection can made to pause by using this function or by letting the read
+A connection can be paused by using this function or by letting the read
 or the write callbacks return the proper magic return code
 (\fICURL_READFUNC_PAUSE\fP and \fICURL_WRITEFUNC_PAUSE\fP). A write callback
 that returns pause signals to the library that it couldn't take care of any
@@ -56,7 +56,7 @@ it in an allocated buffer until the reading is again unpaused using this
 function.
 
 If the downloaded data is compressed and is asked to get uncompressed
-automatially on download, libcurl will continue to uncompress the entire
+automatically on download, libcurl will continue to uncompress the entire
 downloaded chunk and it will cache the data uncompressed. This has the side-
 effect that if you download something that is compressed a lot, it can result
 in a very large data amount needing to be allocated to save the data during

docs/libcurl/curl_easy_setopt.3

@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH curl_easy_setopt 3 "30 Jul 2008" "libcurl 7.19.0" "libcurl Manual"
+.TH curl_easy_setopt 3 "28 Oct 2008" "libcurl 7.19.1" "libcurl Manual"
 .SH NAME
 curl_easy_setopt \- set options for a curl easy handle
 .SH SYNOPSIS
@@ -81,8 +81,10 @@ process. This option is mainly here to allow multi-threaded unix applications
 to still set/use all timeout options etc, without risking getting signals.
 (Added in 7.10)
 
+If this option is set and libcurl has been built with the standard name
+resolver, timeouts will not occur while the name resolve takes place.
 Consider building libcurl with ares support to enable asynchronous DNS
-lookups. It enables nice timeouts for name resolves without signals.
+lookups, which enables nice timeouts for name resolves without signals.
 .PP
 .SH CALLBACK OPTIONS
 .IP CURLOPT_WRITEFUNCTION
@@ -477,12 +479,6 @@ Set the parameter to 1 to make the library tunnel all operations through a
 given HTTP proxy. There is a big difference between using a proxy and to
 tunnel through it. If you don't know what this means, you probably don't want
 this tunneling option.
-.IP CURLOPT_SOCKS5_RESOLVE_LOCAL
-Set the parameter to 1 to make the library to resolve the host name locally
-instead of passing it to the proxy to resolve, when using a SOCKS5 proxy.
-
-Note that libcurl before 7.18.0 always resolved the host name locally even
-when SOCKS5 was used. (Added in 7.18.0)
 .IP CURLOPT_INTERFACE
 Pass a char * as parameter. This set the interface name to use as outgoing
 network interface. The name can be an interface name, an IP address or a host
@@ -607,14 +603,54 @@ to prevent accidental information leakage.
 Pass a char * as parameter, which should be [user name]:[password] to use for
 the connection to the HTTP proxy.  Use \fICURLOPT_PROXYAUTH\fP to decide
 authentication method.
+.IP CURLOPT_USERNAME
+Pass a char * as parameter, which should be pointing to the zero terminated
+user name to use for the transfer.
+
+The CURLOPT_USERNAME option should be used in same way as the
+\fICURLOPT_USERPWD\fP is used.  In comparison to \fICURLOPT_USERPWD\fP the
+CURLOPT_USERNAME allows the username to contain colon, like in following
+example: "sip:user@example.com".  Note the CURLOPT_USERNAME option is an
+alternative way to set the user name.  There is no meaning to use it together
+with the \fICURLOPT_USERPWD\fP option.
+
+In order to specify the password to be used in conjunction with the user name
+use the \fICURLOPT_PASSWORD\fP option.  (Added in 7.19.1)
+.IP CURLOPT_PASSWORD
+Pass a char * as parameter, which should be pointing to the zero terminated
+password to use for the transfer.
+
+The CURLOPT_PASSWORD option should be used in conjunction with
+as the \fICURLOPT_USERNAME\fP option. (Added in 7.19.1)
+.IP CURLOPT_PROXYUSERNAME
+Pass a char * as parameter, which should be pointing to the zero terminated
+user name to use for the transfer while connecting to Proxy.
+
+The CURLOPT_PROXYUSERNAME option should be used in same way as the
+\fICURLOPT_PROXYUSERPWD\fP is used.  In comparison to \fICURLOPT_PROXYUSERPWD\fP
+the CURLOPT_PROXYUSERNAME allows the username to contain colon,
+like in following example: "sip:user@example.com".
+Note the CURLOPT_PROXYUSERNAME option is an alternative way to set the user name
+while connecting to Proxy.  There is no meaning to use it together
+with the \fICURLOPT_PROXYUSERPWD\fP option.
+
+In order to specify the password to be used in conjunction with the user name
+use the \fICURLOPT_PROXYPASSWORD\fP option.  (Added in 7.19.1)
+.IP CURLOPT_PROXYPASSWORD
+Pass a char * as parameter, which should be pointing to the zero terminated
+password to use for the transfer while connecting to Proxy.
+
+The CURLOPT_PROXYPASSWORD option should be used in conjunction with
+as the \fICURLOPT_PROXYUSERNAME\fP option. (Added in 7.19.1)
 .IP CURLOPT_HTTPAUTH
 Pass a long as parameter, which is set to a bitmask, to tell libcurl what
 authentication method(s) you want it to use. The available bits are listed
 below. If more than one bit is set, libcurl will first query the site to see
 what authentication methods it supports and then pick the best one you allow
 it to use. For some methods, this will induce an extra network round-trip. Set
-the actual name and password with the \fICURLOPT_USERPWD\fP option. (Added in
-7.10.6)
+the actual name and password with the \fICURLOPT_USERPWD\fP option or
+with the \fICURLOPT_USERNAME\fP and the \fICURLOPT_USERPASSWORD\fP options.
+(Added in 7.10.6)
 .RS
 .IP CURLAUTH_BASIC
 HTTP Basic authentication. This is the default choice, and the only method
@@ -695,13 +731,14 @@ redirections have been followed, the next redirect will cause an error
 \fICURLOPT_FOLLOWLOCATION\fP is used at the same time. Added in 7.15.1:
 Setting the limit to 0 will make libcurl refuse any redirect. Set it to -1 for
 an infinite number of redirects (which is the default)
-.IP CURLOPT_POST301
+.IP CURLOPT_POSTREDIR
 A parameter set to 1 tells the library to respect RFC 2616/10.3.2 and not
 convert POST requests into GET requests when following a 301 redirection. The
 non-RFC behaviour is ubiquitous in web browsers, so the library does the
 conversion by default to maintain consistency. However, a server may requires
 a POST to remain a POST after such a redirection. This option is meaningful
 only when setting \fICURLOPT_FOLLOWLOCATION\fP.  (Added in 7.17.1)
+(This option was known as CURLOPT_POST301 up to 7.19.0)
 .IP CURLOPT_PUT
 A parameter set to 1 tells the library to use HTTP PUT to transfer data. The
 data should be set with \fICURLOPT_READDATA\fP and \fICURLOPT_INFILESIZE\fP.
@@ -1071,7 +1108,7 @@ Require SSL for all communication or fail with \fICURLE_USE_SSL_FAILED\fP.
 .IP CURLOPT_FTPSSLAUTH
 Pass a long using one of the values from below, to alter how libcurl issues
 \&"AUTH TLS" or "AUTH SSL" when FTP over SSL is activated (see
-\fICURLOPT_FTP_SSL\fP). (Added in 7.12.2)
+\fICURLOPT_USE_SSL\fP). (Added in 7.12.2)
 .RS
 .IP CURLFTPAUTH_DEFAULT
 Allow libcurl to decide
@@ -1265,8 +1302,10 @@ In unix-like systems, this might cause signals to be used unless
 \fICURLOPT_NOSIGNAL\fP is set.
 .IP CURLOPT_TIMEOUT_MS
 Like \fICURLOPT_TIMEOUT\fP but takes number of milliseconds instead. If
-libcurl is built to use the standard system name resolver, that part will
-still use full-second resolution for timeouts. (Added in 7.16.2)
+libcurl is built to use the standard system name resolver, that portion
+of the transfer will still use full-second resolution for timeouts with
+a minimum timeout allowed of one second.
+(Added in 7.16.2)
 .IP CURLOPT_LOW_SPEED_LIMIT
 Pass a long as parameter. It contains the transfer speed in bytes per second
 that the transfer should be below during \fICURLOPT_LOW_SPEED_TIME\fP seconds
@@ -1329,9 +1368,11 @@ timeouts). See also the \fICURLOPT_TIMEOUT\fP option.
 In unix-like systems, this might cause signals to be used unless
 \fICURLOPT_NOSIGNAL\fP is set.
 .IP CURLOPT_CONNECTTIMEOUT_MS
-Like \fICURLOPT_CONNECTTIMEOUT\fP but takes number of milliseconds instead. If
-libcurl is built to use the standard system name resolver, that part will
-still use full-second resolution for timeouts. (Added in 7.16.2)
+Like \fICURLOPT_CONNECTTIMEOUT\fP but takes the number of milliseconds
+instead. If libcurl is built to use the standard system name resolver,
+that portion of the connect will still use full-second resolution for
+timeouts with a minimum timeout allowed of one second.
+(Added in 7.16.2)
 .IP CURLOPT_IPRESOLVE
 Allows an application to select what kind of IP addresses to use when
 resolving host names. This is only interesting when using host names that
@@ -1496,6 +1537,13 @@ A specific error code (CURLE_SSL_CRL_BADFILE) is defined with the option. It
 is returned when the SSL exchange fails because the CRL file cannot be loaded.
 Note that a failure in certificate verification due to a revocation information
 found in the CRL does not trigger this specific error. (Added in 7.19.0)
+.IP CURLOPT_CERTINFO
+Pass a long set to 1 to enable libcurl's certificate chain info gatherer. With
+this enabled, libcurl (if built with OpenSSL) will extract lots of information
+and data about the certificate's in the certificate chain used in the SSL
+connection. This data is then possible to extract after a transfer using
+\fIcurl_easy_getinfo(3)\fP and its option \fICURLINFO_CERTINFO\fP. (Added in
+7.19.1)
 .IP CURLOPT_RANDOM_FILE
 Pass a char * to a zero terminated file name. The file will be used to read
 from to seed the random engine for SSL. The more random the specified file is,

docs/libcurl/curl_multi_setopt.3

@@ -49,7 +49,7 @@ one of the \&"performing" functions of the multi interface
 \fIcurl_multi_perform(3)\fP) - to allow libcurl to keep timeouts and retries
 etc to work. A timeout value of -1 means that there is no timeout at all, and
 0 means that the timeout is already reached. Libcurl attempts to limit calling
-this only when the fixed future timeout time actually change. See also
+this only when the fixed future timeout time actually changes. See also
 \fICURLMOPT_TIMERDATA\fP. This callback can be used instead of, or in addition
 to, \fIcurl_multi_timeout(3)\fP. (Added in 7.16.0)
 .IP CURLMOPT_TIMERDATA

docs/libcurl/libcurl-tutorial.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2007, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2008, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -339,7 +339,7 @@ between the application and the callback.
 
  curl_easy_setopt(easyhandle, CURLOPT_READFUNCTION, read_function);
 
- curl_easy_setopt(easyhandle, CURLOPT_INFILE, &filedata);
+ curl_easy_setopt(easyhandle, CURLOPT_READDATA, &filedata);
 
 Tell libcurl that we want to upload:
 
@@ -1117,12 +1117,18 @@ interface that transfers one file at a time and doesn't return until its
 done.
 
 The multi interface on the other hand, allows your program to transfer
-multiple files in both directions at the same time, without forcing you to
-use multiple threads.
+multiple files in both directions at the same time, without forcing you
+to use multiple threads.  The name might make it seem that the multi
+interface is for multi-threaded programs, but the truth is almost the
+reverse.  The multi interface can allow a single-threaded application
+to perform the same kinds of multiple, simultaneous transfers that
+multi-threaded programs can perform.  It allows many of the benefits
+of multi-threaded transfers without the complexity of managing and
+synchronizing many threads.
 
 To use this interface, you are better off if you first understand the basics
 of how to use the easy interface. The multi interface is simply a way to make
-multiple transfers at the same time, by adding up multiple easy handles in to
+multiple transfers at the same time by adding up multiple easy handles in to
 a "multi stack".
 
 You create the easy handles you want and you set all the options just like you

include/curl/curl.h

@@ -1103,8 +1103,9 @@ typedef enum {
   CINIT(NEW_FILE_PERMS, LONG, 159),
   CINIT(NEW_DIRECTORY_PERMS, LONG, 160),
 
-  /* Obey RFC 2616/10.3.2 and keep POSTs as POSTs after a 301 */
-  CINIT(POST301, LONG, 161),
+  /* Set the behaviour of POST when redirecting. Values must be set to one
+     of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */
+  CINIT(POSTREDIR, LONG, 161),
 
   /* used by scp/sftp to verify the host's public key */
   CINIT(SSH_HOST_PUBLIC_KEY_MD5, OBJECTPOINT, 162),
@@ -1135,6 +1136,19 @@ typedef enum {
   /* (IPv6) Address scope */
   CINIT(ADDRESS_SCOPE, LONG, 171),
 
+  /* Collect certificate chain info and allow it to get retrievable with
+     CURLINFO_CERTINFO after the transfer is complete. (Unfortunately) only
+     working with OpenSSL-powered builds. */
+  CINIT(CERTINFO, LONG, 172),
+
+  /* "name" and "pwd" to use when fetching. */
+  CINIT(USERNAME, OBJECTPOINT, 173),
+  CINIT(PASSWORD, OBJECTPOINT, 174),
+
+    /* "name" and "pwd" to use with Proxy when fetching. */
+  CINIT(PROXYUSERNAME, OBJECTPOINT, 175),
+  CINIT(PROXYPASSWORD, OBJECTPOINT, 176),
+
   CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
@@ -1142,6 +1156,11 @@ typedef enum {
                           the obsolete stuff removed! */
 
 /* Backwards compatibility with older names */
+/* These are scheduled to disappear by 2011 */
+
+/* This was added in version 7.19.1 */
+#define CURLOPT_POST301 CURLOPT_POSTREDIR
+
 /* These are scheduled to disappear by 2009 */
 
 /* The following were added in 7.17.0 */
@@ -1206,6 +1225,14 @@ enum {
   CURL_SSLVERSION_LAST /* never use, keep last */
 };
 
+/* symbols to use with CURLOPT_POSTREDIR.
+   CURL_REDIR_POST_301 and CURL_REDIR_POST_302 can be bitwise ORed so that
+   CURL_REDIR_POST_301 | CURL_REDIR_POST_302 == CURL_REDIR_POST_ALL */
+
+#define CURL_REDIR_GET_ALL  0
+#define CURL_REDIR_POST_301 1
+#define CURL_REDIR_POST_302 2
+#define CURL_REDIR_POST_ALL (CURL_REDIR_POST_301|CURL_REDIR_POST_302)
 
 typedef enum {
   CURL_TIMECOND_NONE,
@@ -1491,6 +1518,15 @@ CURL_EXTERN void curl_slist_free_all(struct curl_slist *);
  */
 CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused);
 
+/* info about the certificate chain, only for OpenSSL builds. Asked
+   for with CURLOPT_CERTINFO / CURLINFO_CERTINFO */
+struct curl_certinfo {
+  int num_of_certs;             /* number of certificates with information */
+  struct curl_slist **certinfo; /* for each index in this array, there's a
+                                   linked list with textual information in the
+                                   format "name: value" */
+};
+
 #define CURLINFO_STRING   0x100000
 #define CURLINFO_LONG     0x200000
 #define CURLINFO_DOUBLE   0x300000
@@ -1533,9 +1569,10 @@ typedef enum {
   CURLINFO_REDIRECT_URL     = CURLINFO_STRING + 31,
   CURLINFO_PRIMARY_IP       = CURLINFO_STRING + 32,
   CURLINFO_APPCONNECT_TIME  = CURLINFO_DOUBLE + 33,
+  CURLINFO_CERTINFO         = CURLINFO_SLIST  + 34,
   /* Fill in new entries below here! */
 
-  CURLINFO_LASTONE          = 33
+  CURLINFO_LASTONE          = 34
 } CURLINFO;
 
 /* CURLINFO_RESPONSE_CODE is the new name for the option previously known as
@@ -1746,7 +1783,8 @@ CURL_EXTERN CURLcode curl_easy_pause(CURL *handle, int bitmask);
 #include "multi.h"
 
 /* the typechecker doesn't work in C++ (yet) */
-#if (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)) && \
+#if defined(__GNUC__) && defined(__GNUC_MINOR__) && \
+    ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)) && \
     !defined(__cplusplus) && !defined(CURL_DISABLE_TYPECHECK)
 #include "typecheck-gcc.h"
 #else

include/curl/curlver.h

@@ -31,13 +31,13 @@
 
 /* This is the version number of the libcurl package from which this header
    file origins: */
-#define LIBCURL_VERSION "7.19.0-CVS"
+#define LIBCURL_VERSION "7.19.1-CVS"
 
 /* The numeric version number is also available "in parts" by using these
    defines: */
 #define LIBCURL_VERSION_MAJOR 7
 #define LIBCURL_VERSION_MINOR 19
-#define LIBCURL_VERSION_PATCH 0
+#define LIBCURL_VERSION_PATCH 1
 
 /* This is the numeric version of the libcurl version number, meant for easier
    parsing and comparions by programs. The LIBCURL_VERSION_NUM define will
@@ -54,7 +54,7 @@
    and it is always a greater number in a more recent release. It makes
    comparisons with greater than and less than work.
 */
-#define LIBCURL_VERSION_NUM 0x071300
+#define LIBCURL_VERSION_NUM 0x071301
 
 /*
  * This is the date and time when the full source package was created. The

include/curl/typecheck-gcc.h

@@ -196,7 +196,11 @@ _CURL_WARNING(_curl_easy_getinfo_err_curl_slist,
    (option) == CURLOPT_INTERFACE ||                                           \
    (option) == CURLOPT_NETRC_FILE ||                                          \
    (option) == CURLOPT_USERPWD ||                                             \
+   (option) == CURLOPT_USERNAME ||                                            \
+   (option) == CURLOPT_PASSWORD ||                                            \
    (option) == CURLOPT_PROXYUSERPWD ||                                        \
+   (option) == CURLOPT_PROXYUSERNAME ||                                       \
+   (option) == CURLOPT_PROXYPASSWORD ||                                       \
    (option) == CURLOPT_ENCODING ||                                            \
    (option) == CURLOPT_REFERER ||                                             \
    (option) == CURLOPT_USERAGENT ||                                           \

lib/Makefile.Watcom

@@ -34,34 +34,35 @@ C_ARG    = $(OBJ_BASE)\wcc386.arg
 LINK_ARG = $(OBJ_BASE)\dyn\wlink.arg
 LIB_ARG  = $(OBJ_BASE)\stat\wlib.arg
 
-OBJS = $(OBJ_DIR)\base64.obj           $(OBJ_DIR)\connect.obj     &
-       $(OBJ_DIR)\content_encoding.obj $(OBJ_DIR)\cookie.obj      &
-       $(OBJ_DIR)\dict.obj             $(OBJ_DIR)\easy.obj        &
-       $(OBJ_DIR)\escape.obj           $(OBJ_DIR)\file.obj        &
-       $(OBJ_DIR)\formdata.obj         $(OBJ_DIR)\ftp.obj         &
-       $(OBJ_DIR)\getenv.obj           $(OBJ_DIR)\getinfo.obj     &
-       $(OBJ_DIR)\gtls.obj             $(OBJ_DIR)\hash.obj        &
-       $(OBJ_DIR)\hostares.obj         $(OBJ_DIR)\hostasyn.obj    &
-       $(OBJ_DIR)\hostip.obj           $(OBJ_DIR)\hostip4.obj     &
-       $(OBJ_DIR)\hostip6.obj          $(OBJ_DIR)\hostsyn.obj     &
-       $(OBJ_DIR)\hostthre.obj         $(OBJ_DIR)\http.obj        &
-       $(OBJ_DIR)\http_chunks.obj      $(OBJ_DIR)\http_digest.obj &
-       $(OBJ_DIR)\http_negotiate.obj   $(OBJ_DIR)\http_ntlm.obj   &
-       $(OBJ_DIR)\if2ip.obj            $(OBJ_DIR)\inet_ntop.obj   &
-       $(OBJ_DIR)\inet_pton.obj        $(OBJ_DIR)\krb4.obj        &
-       $(OBJ_DIR)\ldap.obj             $(OBJ_DIR)\llist.obj       &
-       $(OBJ_DIR)\md5.obj              $(OBJ_DIR)\memdebug.obj    &
-       $(OBJ_DIR)\mprintf.obj          $(OBJ_DIR)\multi.obj       &
-       $(OBJ_DIR)\netrc.obj            $(OBJ_DIR)\parsedate.obj   &
-       $(OBJ_DIR)\progress.obj         $(OBJ_DIR)\security.obj    &
-       $(OBJ_DIR)\select.obj           $(OBJ_DIR)\sendf.obj       &
-       $(OBJ_DIR)\share.obj            $(OBJ_DIR)\socks.obj       &
-       $(OBJ_DIR)\speedcheck.obj       $(OBJ_DIR)\splay.obj       &
-       $(OBJ_DIR)\sslgen.obj           $(OBJ_DIR)\ssluse.obj      &
-       $(OBJ_DIR)\strequal.obj         $(OBJ_DIR)\strerror.obj    &
-       $(OBJ_DIR)\strtok.obj           $(OBJ_DIR)\strtoofft.obj   &
-       $(OBJ_DIR)\telnet.obj           $(OBJ_DIR)\tftp.obj        &
-       $(OBJ_DIR)\timeval.obj          $(OBJ_DIR)\transfer.obj    &
+OBJS = $(OBJ_DIR)\base64.obj           $(OBJ_DIR)\connect.obj        &
+       $(OBJ_DIR)\content_encoding.obj $(OBJ_DIR)\cookie.obj         &
+       $(OBJ_DIR)\curl_addrinfo.obj    $(OBJ_DIR)\dict.obj           &
+       $(OBJ_DIR)\easy.obj             $(OBJ_DIR)\escape.obj         &
+       $(OBJ_DIR)\file.obj             $(OBJ_DIR)\formdata.obj       &
+       $(OBJ_DIR)\ftp.obj              $(OBJ_DIR)\getenv.obj         &
+       $(OBJ_DIR)\getinfo.obj          $(OBJ_DIR)\gtls.obj           &
+       $(OBJ_DIR)\hash.obj             $(OBJ_DIR)\hostares.obj       &
+       $(OBJ_DIR)\hostasyn.obj         $(OBJ_DIR)\hostip.obj         &
+       $(OBJ_DIR)\hostip4.obj          $(OBJ_DIR)\hostip6.obj        &
+       $(OBJ_DIR)\hostsyn.obj          $(OBJ_DIR)\hostthre.obj       &
+       $(OBJ_DIR)\http.obj             $(OBJ_DIR)\http_chunks.obj    &
+       $(OBJ_DIR)\http_digest.obj      $(OBJ_DIR)\http_negotiate.obj &
+       $(OBJ_DIR)\http_ntlm.obj        $(OBJ_DIR)\if2ip.obj          &
+       $(OBJ_DIR)\inet_ntop.obj        $(OBJ_DIR)\inet_pton.obj      &
+       $(OBJ_DIR)\krb4.obj             $(OBJ_DIR)\ldap.obj           &
+       $(OBJ_DIR)\llist.obj            $(OBJ_DIR)\md5.obj            &
+       $(OBJ_DIR)\memdebug.obj         $(OBJ_DIR)\mprintf.obj        &
+       $(OBJ_DIR)\multi.obj            $(OBJ_DIR)\netrc.obj          &
+       $(OBJ_DIR)\parsedate.obj        $(OBJ_DIR)\progress.obj       &
+       $(OBJ_DIR)\security.obj         $(OBJ_DIR)\rawstr.obj         &
+       $(OBJ_DIR)\select.obj           $(OBJ_DIR)\sendf.obj          &
+       $(OBJ_DIR)\share.obj            $(OBJ_DIR)\socks.obj          &
+       $(OBJ_DIR)\speedcheck.obj       $(OBJ_DIR)\splay.obj          &
+       $(OBJ_DIR)\sslgen.obj           $(OBJ_DIR)\ssluse.obj         &
+       $(OBJ_DIR)\strequal.obj         $(OBJ_DIR)\strerror.obj       &
+       $(OBJ_DIR)\strtok.obj           $(OBJ_DIR)\strtoofft.obj      &
+       $(OBJ_DIR)\telnet.obj           $(OBJ_DIR)\tftp.obj           &
+       $(OBJ_DIR)\timeval.obj          $(OBJ_DIR)\transfer.obj       &
        $(OBJ_DIR)\url.obj              $(OBJ_DIR)\version.obj
 
 #
@@ -503,3 +504,15 @@ $(OBJ_DIR)\nss.obj: nss.c setup.h config-win32.h ..\include\curl\curlbuild.h &
   strequal.h select.h sslgen.h ..\include\curl\mprintf.h
 $(OBJ_DIR)\qssl.obj: qssl.c setup.h config-win32.h ..\include\curl\curlbuild.h &
   ..\include\curl\curlrules.h setup_once.h
+$(OBJ_DIR)\rawstr.obj: rawstr.c setup.h config-win32.h ..\include\curl\curlbuild.h &
+  ..\include\curl\curlrules.h setup_once.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\curlrules.h &
+  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
+  strerror.h urldata.h cookie.h formdata.h timeval.h http_chunks.h &
+  hostip.h hash.h llist.h splay.h ..\include\curl\mprintf.h
+$(OBJ_DIR)\curl_addrinfo.o: curl_addrinfo.c setup.h config-win32.h &
+  ..\include\curl\curlbuild.h ..\include\curl\curlrules.h setup_once.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\curlrules.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h curl_addrinfo.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h

lib/Makefile.am

@@ -68,38 +68,23 @@ if SONAME_BUMP
 #
 # This conditional soname bump SHOULD be removed at next "proper" bump.
 #
-VERSIONINFO=-version-info 6:0:1
+VERSIONINFO=-version-info 6:1:1
 else
-VERSIONINFO=-version-info 5:0:1
+VERSIONINFO=-version-info 5:1:1
 endif
 
 # This flag accepts an argument of the form current[:revision[:age]]. So,
 # passing -version-info 3:12:1 sets current to 3, revision to 12, and age to
 # 1.
 #
-# If either revision or age are omitted, they default to 0. Also note that age
-# must be less than or equal to the current interface number.
+# Here's the simplified rule guide on how to change -version-info:
+# (current version is C:R:A)
 # 
-# Here are a set of rules to help you update your library version information:
-#
-# 1.Start with version information of 0:0:0 for each libtool library.
-#
-# 2.Update the version information only immediately before a public release of
-# your software. More frequent updates are unnecessary, and only guarantee
-# that the current interface number gets larger faster.
-#
-# 3.If the library source code has changed at all since the last update, then
-# increment revision (c:r+1:a)
-#
-# 4.If any interfaces have been added, removed, or changed since the last
-# update, increment current, and set revision to 0. (c+1:r=0:a)
-#
-# 5.If any interfaces have been added since the last public release, then
-# increment age. (c:r:a+1)
-#
-# 6.If any interfaces have been removed since the last public release, then
-# set age to 0. (c:r:a=0)
+# 1. if there are only source changes, use C:R+1:A
+# 2. if interfaces were added use C+1:0:A+1
+# 3. if interfaces were removed, then use C+1:0:0
 #
+# For the full guide on libcurl ABI rules, see docs/libcurl/ABI
 
 if NO_UNDEFINED
 # The -no-undefined flag is CRUCIAL for this to build fine on Cygwin.

lib/Makefile.inc

@@ -9,15 +9,15 @@ CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	\
   http_negotiate.c http_ntlm.c inet_pton.c strtoofft.c strerror.c	\
   hostares.c hostasyn.c hostip4.c hostip6.c hostsyn.c hostthre.c	\
   inet_ntop.c parsedate.c select.c gtls.c sslgen.c tftp.c splay.c	\
-  strdup.c socks.c ssh.c nss.c qssl.c
+  strdup.c socks.c ssh.c nss.c qssl.c rawstr.c curl_addrinfo.c
 
 HHEADERS = arpa_telnet.h netrc.h file.h timeval.h qssl.h hostip.h	\
   progress.h formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h	\
   if2ip.h speedcheck.h urldata.h curl_ldap.h ssluse.h escape.h telnet.h	\
-  getinfo.h strequal.h krb4.h memdebug.h inet_ntoa_r.h http_chunks.h	\
+  getinfo.h strequal.h krb4.h memdebug.h http_chunks.h	                \
   strtok.h connect.h llist.h hash.h content_encoding.h share.h		\
   curl_md5.h http_digest.h http_negotiate.h http_ntlm.h inet_pton.h	\
   strtoofft.h strerror.h inet_ntop.h curlx.h memory.h setup.h		\
   transfer.h select.h easyif.h multiif.h parsedate.h sslgen.h gtls.h	\
   tftp.h sockaddr.h splay.h strdup.h setup_once.h socks.h ssh.h nssg.h	\
-  curl_base64.h
+  curl_base64.h rawstr.h curl_addrinfo.h

lib/Makefile.netware

@@ -379,6 +379,7 @@ ifeq ($(LIBARCH),CLIB)
 	@echo $(DL)#define OS "i586-pc-clib-NetWare"$(DL) >> $@
 	@echo $(DL)#define NETDB_USE_INTERNET 1$(DL) >> $@
 	@echo $(DL)#define HAVE_STRICMP 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRNICMP 1$(DL) >> $@
 	@echo $(DL)#define RECV_TYPE_ARG1 int$(DL) >> $@
 	@echo $(DL)#define RECV_TYPE_ARG2 char *$(DL) >> $@
 	@echo $(DL)#define RECV_TYPE_ARG3 int$(DL) >> $@
@@ -403,7 +404,6 @@ else
 	@echo $(DL)#define OS "i586-pc-libc-NetWare"$(DL) >> $@
 	@echo $(DL)#define HAVE_FTRUNCATE 1$(DL) >> $@
 	@echo $(DL)#define HAVE_GETTIMEOFDAY 1$(DL) >> $@
-	@echo $(DL)#define HAVE_INET_PTON 1$(DL) >> $@
 	@echo $(DL)#define HAVE_INTTYPES_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LIMITS_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LONGLONG 1$(DL) >> $@
@@ -439,8 +439,12 @@ else
 	@echo $(DL)#define SEND_TYPE_ARG4 int$(DL) >> $@
 	@echo $(DL)#define SEND_TYPE_RETV ssize_t$(DL) >> $@
 	@echo $(DL)#define SIZEOF_STRUCT_IN6_ADDR 16$(DL) >> $@
+	@echo $(DL)#define SIZEOF_OFF_T 8$(DL) >> $@
+	@echo $(DL)#define _LARGEFILE 1$(DL) >> $@
 ifdef ENABLE_IPV6
 	@echo $(DL)#define ENABLE_IPV6 1$(DL) >> $@
+	@echo $(DL)#define HAVE_FREEADDRINFO 1$(DL) >> $@
+	@echo $(DL)#define HAVE_GETADDRINFO 1$(DL) >> $@
 endif
 endif
 	@echo $(DL)#define USE_MANUAL 1$(DL) >> $@
@@ -454,7 +458,6 @@ endif
 	@echo $(DL)#define HAVE_GETPROTOBYNAME 1$(DL) >> $@
 	@echo $(DL)#define HAVE_GMTIME_R 1$(DL) >> $@
 	@echo $(DL)#define HAVE_INET_ADDR 1$(DL) >> $@
-	@echo $(DL)#define HAVE_INET_NTOA 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LL 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LOCALE_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LOCALTIME_R 1$(DL) >> $@
@@ -485,6 +488,7 @@ endif
 	@echo $(DL)#define HAVE_UNISTD_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_UTIME 1$(DL) >> $@
 	@echo $(DL)#define HAVE_UTIME_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_WRITEV 1$(DL) >> $@
 	@echo $(DL)#define RETSIGTYPE void$(DL) >> $@
 	@echo $(DL)#define SIZEOF_STRUCT_IN_ADDR 4$(DL) >> $@
 	@echo $(DL)#define STDC_HEADERS 1$(DL) >> $@

lib/Makefile.riscos

@@ -12,7 +12,8 @@ objs =	o.base64 o.connect o.cookie o.dict \
 	o.memdebug o.mprintf o.netrc o.parsedate o.progress \
 	o.security o.select o.sendf o.speedcheck o.ssluse \
 	o.strequal o.strtok o.telnet o.timeval \
-	o.transfer o.url o.version o.strtoofft o.sslgen o.gtls
+	o.transfer o.url o.version o.strtoofft o.sslgen o.gtls \
+	o.rawstr
 
 # Compile options:
 linkopts	= -o libcurl
@@ -128,6 +129,9 @@ o.sslgen:	c.sslgen
 o.ssluse:	c.ssluse
 		gcc $(compileropts) -c -o ssluse.o c.ssluse
 
+o.rawstr:	c.rawstr
+		gcc $(compileropts) -c -o rawstr.o c.rawstr
+
 o.strequal:	c.strequal
 		gcc $(compileropts) -c -o strequal.o c.strequal
 

lib/Makefile.vc6

@@ -481,6 +481,7 @@ X_OBJS= \
 	$(DIROBJ)\tftp.obj \
 	$(DIROBJ)\splay.obj \
 	$(DIROBJ)\socks.obj \
+	$(DIROBJ)\rawstr.obj \
 	$(RESOURCE)
 
 all : $(TARGET)

lib/amigaos.h

@@ -40,9 +40,6 @@
 #ifndef select
 # define select(args...) WaitSelect( args, NULL)
 #endif
-#ifndef inet_ntoa
-# define inet_ntoa(x)    Inet_NtoA( x ## .s_addr)
-#endif
 #ifndef ioctl
 # define ioctl(a,b,c,d)  IoctlSocket( (LONG)a, (ULONG)b, (char*)c)
 #endif

lib/base64.c

@@ -117,7 +117,7 @@ size_t Curl_base64_decode(const char *src, unsigned char **outptr)
   /* Decode all but the last quantum (which may not decode to a
   multiple of 3 bytes) */
   for(i = 0; i < numQuantums - 1; i++) {
-    decodeQuantum((unsigned char *)newstr, src);
+    decodeQuantum(newstr, src);
     newstr += 3; src += 4;
   }
 
@@ -153,14 +153,14 @@ size_t Curl_base64_encode(struct SessionHandle *data,
   char *convbuf = NULL;
 #endif
 
-  char *indata = (char *)inp;
+  const char *indata = inp;
 
   *outptr = NULL; /* set to NULL in case of failure before we reach the end */
 
   if(0 == insize)
     insize = strlen(indata);
 
-  base64data = output = (char*)malloc(insize*4/3+4);
+  base64data = output = malloc(insize*4/3+4);
   if(NULL == output)
     return 0;
 
@@ -171,7 +171,7 @@ size_t Curl_base64_encode(struct SessionHandle *data,
    * so we copy it to a buffer, translate it, and use that instead.
    */
   if(data) {
-    convbuf = (char*)malloc(insize);
+    convbuf = malloc(insize);
     if(!convbuf) {
       free(output);
       return 0;
@@ -271,7 +271,7 @@ int main(int argc, argv_item_t argv[], char **envp)
   data = (unsigned char *)suck(&dataLen);
   base64Len = Curl_base64_encode(handle, data, dataLen, &base64);
 
-  fprintf(stderr, "%d\n", base64Len);
+  fprintf(stderr, "%zu\n", base64Len);
   fprintf(stdout, "%s\n", base64);
 
   free(base64); free(data);
@@ -356,7 +356,7 @@ void *suck(int *lenptr)
 
   do {
     cursize *= 2;
-    buf = (unsigned char *)realloc(buf, cursize);
+    buf = realloc(buf, cursize);
     memset(buf + len, 0, cursize - len);
     lastread = fread(buf + len, 1, cursize - len, stdin);
     len += lastread;

lib/config-amigaos.h

@@ -28,7 +28,6 @@
 #define HAVE_ARPA_INET_H 1
 #define HAVE_GETHOSTBYADDR 1
 #define HAVE_INET_ADDR 1
-#define HAVE_INET_NTOA 1
 #define HAVE_INTTYPES_H 1
 #define HAVE_IOCTLSOCKET_CASE 1
 #define HAVE_LIBCRYPTO 1

lib/config-mac.h

@@ -1,3 +1,12 @@
+#ifndef __LIB_CONFIG_MAC_H
+#define __LIB_CONFIG_MAC_H
+
+/* ================================================================ */
+/*    lib/config-mac.h - Hand crafted config file for Mac OS 9      */
+/* ================================================================ */
+/*   On Mac OS X you must run configure to generate config.h file   */
+/* ================================================================ */
+
 #define OS "mac"
 
 #define HAVE_NETINET_IN_H       1
@@ -19,9 +28,9 @@
 
 #define TIME_WITH_SYS_TIME      1
 
+#define HAVE_ALARM              1
 #define HAVE_STRDUP             1
 #define HAVE_UTIME              1
-#define HAVE_INET_NTOA          1
 #define HAVE_SETVBUF            1
 #define HAVE_STRFTIME           1
 #define HAVE_INET_ADDR          1
@@ -83,3 +92,5 @@
 
 #define HAVE_EXTRA_STRICMP_H 1
 #define HAVE_EXTRA_STRDUP_H  1
+
+#endif /* __LIB_CONFIG_MAC_H */

lib/config-os400.h

@@ -33,12 +33,6 @@
 /* Define if you have the gethostbyname_r() function with 6 arguments */
 #undef HAVE_GETHOSTBYNAME_R_6
 
-/* Define if you have the inet_ntoa_r function declared. */
-#define HAVE_INET_NTOA_R_DECL
-
-/* Define if the inet_ntoa_r function returns an int. */
-#define HAVE_INT_INET_NTOA_R
-
 /* Define if you need the _REENTRANT define for some functions */
 #undef NEED_REENTRANT
 
@@ -63,6 +57,9 @@
 /* Set to explicitly specify we don't want to use thread-safe functions */
 #undef DISABLED_THREADSAFE
 
+/* Define to 1 if you have the alarm function. */
+#define HAVE_ALARM 1
+
 /* Define if you have the <alloca.h> header file. */
 #undef HAVE_ALLOCA_H
 
@@ -124,12 +121,6 @@
 /* Define if you have the `inet_addr' function. */
 #define HAVE_INET_ADDR
 
-/* Define if you have the `inet_ntoa' function. */
-#define HAVE_INET_NTOA
-
-/* Define if you have the `inet_ntoa_r' function. */
-#define HAVE_INET_NTOA_R
-
 /* Define if you have the <inttypes.h> header file. */
 #define HAVE_INTTYPES_H
 

lib/config-riscos.h

@@ -29,9 +29,6 @@
 /* Define if you have the gethostbyname_r() function with 6 arguments */
 #undef HAVE_GETHOSTBYNAME_R_6
 
-/* Define if you have the inet_ntoa_r function declared. */
-#undef HAVE_INET_NTOA_R_DECL
-
 /* Define if you need the _REENTRANT define for some functions */
 #undef NEED_REENTRANT
 
@@ -59,6 +56,9 @@
 /* Define if you want to enable IPv6 support */
 #undef ENABLE_IPV6
 
+/* Define to 1 if you have the alarm function. */
+#define HAVE_ALARM 1
+
 /* Define if you have the <alloca.h> header file. */
 #define HAVE_ALLOCA_H
 
@@ -119,12 +119,6 @@
 /* Define if you have the `inet_addr' function. */
 #undef HAVE_INET_ADDR
 
-/* Define if you have the `inet_ntoa' function. */
-#undef HAVE_INET_NTOA
-
-/* Define if you have the `inet_ntoa_r' function. */
-#undef HAVE_INET_NTOA_R
-
 /* Define if you have the <inttypes.h> header file. */
 #define HAVE_INTTYPES_H
 

lib/config-symbian.h

@@ -222,17 +222,11 @@
 /* Define to 1 if you have the `inet_addr' function. */
 /*#define HAVE_INET_ADDR 1*/
 
-/* Define to 1 if you have the `inet_ntoa' function. */
-/*#define HAVE_INET_NTOA 1*/
+/* Define to 1 if you have a IPv6 capable working inet_ntop function. */
+/*#define HAVE_INET_NTOP 1*/
 
-/* Define to 1 if you have the `inet_ntoa_r' function. */
-/* #undef HAVE_INET_NTOA_R */
-
-/* inet_ntoa_r() is declared */
-/* #undef HAVE_INET_NTOA_R_DECL */
-
-/* Define to 1 if you have the `inet_pton' function. */
-#define HAVE_INET_PTON 1
+/* Define to 1 if you have a IPv6 capable working inet_pton function. */
+/*#define HAVE_INET_PTON 1*/
 
 /* Define to 1 if you have the <inttypes.h> header file. */
 #define HAVE_INTTYPES_H 1
@@ -297,9 +291,6 @@
 /* Define to 1 if you have the `ssl' library (-lssl). */
 /*#define HAVE_LIBSSL 1*/
 
-/* if zlib is available */
-/*#define HAVE_LIBZ 1*/
-
 /* Define to 1 if you have the <limits.h> header file. */
 #define HAVE_LIMITS_H 1
 
@@ -339,9 +330,6 @@
 /* Define to 1 if NI_WITHSCOPEID exists and works. */
 /*#define HAVE_NI_WITHSCOPEID 1*/
 
-/* Defined if no inet_pton() prototype available */
-/* #undef HAVE_NO_INET_PTON_PROTO */
-
 /* we have no strerror_r() proto */
 /* #undef HAVE_NO_STRERROR_R_DECL */
 
@@ -628,9 +616,6 @@
 /* Define to 1 if you have the <x509.h> header file. */
 /* #undef HAVE_X509_H */
 
-/* if you have the zlib.h header file */
-/*#define HAVE_ZLIB_H 1*/
-
 /* Define to 1 if you are building a native Windows target. */
 /* #undef NATIVE_WINDOWS */
 
@@ -803,7 +788,18 @@
 /* #define CURLDEBUG */
 #endif
 
-/* sys/cdefs.h fails to define this for WINSCW */
+/* sys/cdefs.h fails to define this for WINSCW prior to Symbian OS ver. 9.4 */
 #ifndef __LONG_LONG_SUPPORTED
 #define __LONG_LONG_SUPPORTED
 #endif
+
+/* Enable appropriate header only when zlib support is enabled */
+#ifdef HAVE_LIBZ
+#define HAVE_ZLIB_H 1
+#endif
+
+/* Enable appropriate definitions only when OpenSSL support is enabled */
+#ifdef USE_SSL
+#define USE_OPENSSL 1
+#define USE_SSLEAY 1
+#endif

lib/config-tpf.h

@@ -74,6 +74,9 @@
 /* Define to the type of arg 7 for getnameinfo. */
 /* #undef GETNAMEINFO_TYPE_ARG7 */
 
+/* Define to 1 if you have the alarm function. */
+#define HAVE_ALARM 1
+
 /* Define to 1 if you have the <arpa/inet.h> header file. */
 #define HAVE_ARPA_INET_H 1
 
@@ -205,16 +208,10 @@
 /* Define to 1 if you have the `inet_addr' function. */
 #define HAVE_INET_ADDR 1
 
-/* Define to 1 if you have the `inet_ntoa' function. */
-#define HAVE_INET_NTOA 1
+/* Define to 1 if you have a IPv6 capable working inet_ntop function. */
+/* #undef HAVE_INET_NTOP */
 
-/* Define to 1 if you have the `inet_ntoa_r' function. */
-/* #undef HAVE_INET_NTOA_R */
-
-/* inet_ntoa_r() is declared */
-/* #undef HAVE_INET_NTOA_R_DECL */
-
-/* Define to 1 if you have the `inet_pton' function. */
+/* Define to 1 if you have a IPv6 capable working inet_pton function. */
 /* #undef HAVE_INET_PTON */
 
 /* Define to 1 if you have the <inttypes.h> header file. */
@@ -296,9 +293,6 @@
 /* Define if NI_WITHSCOPEID exists and works */
 /* #undef HAVE_NI_WITHSCOPEID */
 
-/* Defined if no inet_pton() prototype available */
-/* #undef HAVE_NO_INET_PTON_PROTO */
-
 /* we have no strerror_r() proto */
 /* #undef HAVE_NO_STRERROR_R_DECL */
 

lib/config-win32.h

@@ -157,9 +157,6 @@
 /* Define if you have the inet_addr function.  */
 #define HAVE_INET_ADDR 1
 
-/* Define if you have the inet_ntoa function.  */
-#define HAVE_INET_NTOA 1
-
 /* Define if you have the ioctlsocket function.  */
 #define HAVE_IOCTLSOCKET 1
 
@@ -188,15 +185,21 @@
 /* Define if you have the strcasecmp function.  */
 /* #define HAVE_STRCASECMP 1 */
 
-/* Define if you have the stricmp function.  */
-#define HAVE_STRICMP 1
-
 /* Define if you have the strdup function.  */
 #define HAVE_STRDUP 1
 
 /* Define if you have the strftime function.  */
 #define HAVE_STRFTIME 1
 
+/* Define if you have the stricmp function. */
+#define HAVE_STRICMP 1
+
+/* Define if you have the strncasecmp function. */
+/* #define HAVE_STRNCASECMP 1 */
+
+/* Define if you have the strnicmp function. */
+#define HAVE_STRNICMP 1
+
 /* Define if you have the strstr function.  */
 #define HAVE_STRSTR 1
 
@@ -216,9 +219,6 @@
 #define HAVE_UTIME 1
 #endif
 
-/* Define if you have the getnameinfo function. */
-#define HAVE_GETNAMEINFO 1
-
 /* Define to the type qualifier of arg 1 for getnameinfo. */
 #define GETNAMEINFO_QUAL_ARG1 const
 
@@ -390,6 +390,20 @@
 #  endif
 #endif
 
+/* Availability of freeaddrinfo, getaddrinfo and getnameinfo functions is quite */
+/* convoluted, compiler dependant and in some cases even build target dependat. */
+#if defined(HAVE_WS2TCPIP_H)
+#  if defined(_WIN32_WINNT) && (_WIN32_WINNT >= 0x0501)
+#    define HAVE_FREEADDRINFO 1
+#    define HAVE_GETADDRINFO  1
+#    define HAVE_GETNAMEINFO  1
+#  elif defined(_MSC_VER) && (_MSC_VER >= 1200)
+#    define HAVE_FREEADDRINFO 1
+#    define HAVE_GETADDRINFO  1
+#    define HAVE_GETNAMEINFO  1
+#  endif
+#endif
+
 /* ---------------------------------------------------------------- */
 /*                        LARGE FILE SUPPORT                        */
 /* ---------------------------------------------------------------- */
@@ -402,6 +416,10 @@
 #  endif
 #endif
 
+#if defined(__MINGW32__) && !defined(USE_WIN32_LARGE_FILES)
+#  define USE_WIN32_LARGE_FILES
+#endif
+
 #if !defined(USE_WIN32_LARGE_FILES) && !defined(USE_WIN32_SMALL_FILES)
 #  define USE_WIN32_SMALL_FILES
 #endif

lib/config-win32ce.h

@@ -145,9 +145,6 @@
 /* Define if you have the inet_addr function.  */
 #define HAVE_INET_ADDR 1
 
-/* Define if you have the inet_ntoa function.  */
-#define HAVE_INET_NTOA 1
-
 /* Define if you have the ioctlsocket function.  */
 #define HAVE_IOCTLSOCKET 1
 
@@ -172,15 +169,21 @@
 /* Define if you have the strcasecmp function.  */
 /* #define HAVE_STRCASECMP 1 */
 
-/* Define if you have the stricmp function.  */
-/* #define HAVE_STRICMP 1 */
-
 /* Define if you have the strdup function.  */
 /* #define HAVE_STRDUP 1 */
 
 /* Define if you have the strftime function.  */
 /* #define HAVE_STRFTIME 1 */
 
+/* Define if you have the stricmp function. */
+/* #define HAVE_STRICMP 1 */
+
+/* Define if you have the strncasecmp function. */
+/* #define HAVE_STRNCASECMP 1 */
+
+/* Define if you have the strnicmp function. */
+/* #define HAVE_STRNICMP 1 */
+
 /* Define if you have the strstr function.  */
 #define HAVE_STRSTR 1
 

lib/config.dos

@@ -20,12 +20,12 @@
 #define HAVE_ARPA_INET_H       1
 #define HAVE_FCNTL_H           1
 #define HAVE_FIONBIO           1
+#define HAVE_GETADDRINFO       1
+#define HAVE_GETNAMEINFO       1
 #define HAVE_GETPROTOBYNAME    1
 #define HAVE_GETTIMEOFDAY      1
 #define HAVE_IO_H              1
 #define HAVE_IOCTLSOCKET       1
-#define HAVE_INET_PTON         1
-#define HAVE_INET_NTOP         1
 #define HAVE_LOCALE_H          1
 #define HAVE_LONGLONG          1
 #define HAVE_MEMORY_H          1
@@ -64,7 +64,7 @@
 #define STDC_HEADERS           1
 #define TIME_WITH_SYS_TIME     1
 
-/* Qualifiers for send(), recv() and recvfrom(). */
+/* Qualifiers for send(), recv(), recvfrom() and getnameinfo(). */
 
 #define SEND_TYPE_ARG1         int
 #define SEND_QUAL_ARG2         const
@@ -88,6 +88,12 @@
 #define RECVFROM_TYPE_RETV     int
 #define RECVFROM_TYPE_ARG2_IS_VOID 1
 
+#define GETNAMEINFO_QUAL_ARG1  const
+#define GETNAMEINFO_TYPE_ARG1  struct sockaddr *
+#define GETNAMEINFO_TYPE_ARG2  int
+#define GETNAMEINFO_TYPE_ARG46 int
+#define GETNAMEINFO_TYPE_ARG7  int
+
 #define BSD
 
 /* #define MALLOCDEBUG */

lib/connect.c

@@ -102,6 +102,18 @@
 #undef SO_NOSIGPIPE
 #endif
 
+struct Curl_sockaddr_ex {
+  int family;
+  int socktype;
+  int protocol;
+  unsigned int addrlen;
+  union {
+    struct sockaddr addr;
+    struct Curl_sockaddr_storage buff;
+  } _sa_ex_u;
+};
+#define sa_addr _sa_ex_u.addr
+
 static bool verifyconnect(curl_socket_t sockfd, int *error);
 
 static curl_socket_t
@@ -284,39 +296,34 @@ int waitconnect(curl_socket_t sockfd, /* socket */
 }
 
 static CURLcode bindlocal(struct connectdata *conn,
-                          curl_socket_t sockfd)
+                          curl_socket_t sockfd, int af)
 {
-#ifdef ENABLE_IPV6
-  char ipv6_addr[16];
-#endif
   struct SessionHandle *data = conn->data;
   struct sockaddr_in me;
+#ifdef ENABLE_IPV6
+  struct sockaddr_in6 me6;
+#endif
   struct sockaddr *sock = NULL;  /* bind to this address */
-  socklen_t socksize; /* size of the data sock points to */
+  socklen_t socksize = 0; /* size of the data sock points to */
+  struct Curl_dns_entry *h=NULL;
   unsigned short port = data->set.localport; /* use this port number, 0 for
                                                 "random" */
   /* how many port numbers to try to bind to, increasing one at a time */
   int portnum = data->set.localportrange;
   const char *dev = data->set.str[STRING_DEVICE];
+  int error;
 
   /*************************************************************
    * Select device to bind socket to
    *************************************************************/
   if(dev && (strlen(dev)<255) ) {
-    struct Curl_dns_entry *h=NULL;
     char myhost[256] = "";
-    in_addr_t in;
     int rc;
     bool was_iface = FALSE;
-    int in6 = -1;
 
-    /* First check if the given name is an IP address */
-    in=inet_addr((char *) dev);
-
-    if((in == CURL_INADDR_NONE) &&
-       Curl_if2ip(dev, myhost, sizeof(myhost))) {
+    if(Curl_if2ip(af, dev, myhost, sizeof(myhost))) {
       /*
-       * We now have the numerical IPv4-style x.y.z.w in the 'myhost' buffer
+       * We now have the numerical IP address in the 'myhost' buffer
        */
       rc = Curl_resolv(conn, myhost, 0, &h);
       if(rc == CURLRESOLV_PENDING)
@@ -324,7 +331,6 @@ static CURLcode bindlocal(struct connectdata *conn,
 
       if(h) {
         was_iface = TRUE;
-        Curl_resolv_unlock(data, h);
       }
     }
 
@@ -333,22 +339,32 @@ static CURLcode bindlocal(struct connectdata *conn,
        * This was not an interface, resolve the name as a host name
        * or IP number
        */
+
+      /*
+       * Temporarily force name resolution to use only the address type
+       * of the connection. The resolve functions should really be changed
+       * to take a type parameter instead.
+       */
+      long ipver = data->set.ip_version;
+      if (af == AF_INET)
+        data->set.ip_version = CURL_IPRESOLVE_V4;
+#ifdef ENABLE_IPV6
+      else if (af == AF_INET6)
+        data->set.ip_version = CURL_IPRESOLVE_V6;
+#endif
+
       rc = Curl_resolv(conn, dev, 0, &h);
       if(rc == CURLRESOLV_PENDING)
         (void)Curl_wait_for_resolv(conn, &h);
+      data->set.ip_version = ipver;
 
       if(h) {
-        if(in == CURL_INADDR_NONE)
-          /* convert the resolved address, sizeof myhost >= INET_ADDRSTRLEN */
-          Curl_printable_address(h->addr, myhost, sizeof myhost);
-        else
-          /* we know data->set.device is shorter than the myhost array */
-          strcpy(myhost, dev);
-        Curl_resolv_unlock(data, h);
+        /* convert the resolved address, sizeof myhost >= INET_ADDRSTRLEN */
+        Curl_printable_address(h->addr, myhost, sizeof myhost);
       }
     }
 
-    if(! *myhost) {
+    if(!*myhost || !h) {
       /* need to fix this
          h=Curl_gethost(data,
          getmyhost(*myhost,sizeof(myhost)),
@@ -356,11 +372,16 @@ static CURLcode bindlocal(struct connectdata *conn,
          sizeof(hostent_buf));
       */
       failf(data, "Couldn't bind to '%s'", dev);
+      if(h)
+        Curl_resolv_unlock(data, h);
       return CURLE_INTERFACE_FAILED;
     }
 
     infof(data, "Bind local address to %s\n", myhost);
 
+    sock = h->addr->ai_addr;
+    socksize = h->addr->ai_addrlen;
+
 #ifdef SO_BINDTODEVICE
     /* I am not sure any other OSs than Linux that provide this feature, and
      * at the least I cannot test. --Ben
@@ -376,44 +397,39 @@ static CURLcode bindlocal(struct connectdata *conn,
        */
       if(setsockopt(sockfd, SOL_SOCKET, SO_BINDTODEVICE,
                      dev, strlen(dev)+1) != 0) {
-        /* printf("Failed to BINDTODEVICE, socket: %d  device: %s error: %s\n",
-           sockfd, dev, Curl_strerror(SOCKERRNO)); */
-        infof(data, "SO_BINDTODEVICE %s failed\n", dev);
+        error = SOCKERRNO;
+        infof(data, "SO_BINDTODEVICE %s failed with errno %d: %s; will do regular bind\n",
+              dev, error, Curl_strerror(conn, error));
         /* This is typically "errno 1, error: Operation not permitted" if
            you're not running as root or another suitable privileged user */
       }
     }
 #endif
-
-    in=inet_addr(myhost);
-
-#ifdef ENABLE_IPV6
-    in6 = Curl_inet_pton (AF_INET6, myhost, (void *)&ipv6_addr);
-#endif
-    if(CURL_INADDR_NONE == in && -1 == in6) {
-      failf(data,"couldn't find my own IP address (%s)", myhost);
-      return CURLE_INTERFACE_FAILED;
-    } /* end of inet_addr */
-
-    if( h ) {
-      Curl_addrinfo *addr = h->addr;
-      sock = addr->ai_addr;
-      socksize = addr->ai_addrlen;
-    }
-    else
-      return CURLE_INTERFACE_FAILED;
-
   }
   else if(port) {
     /* if a local port number is requested but no local IP, extract the
        address from the socket */
-    memset(&me, 0, sizeof(struct sockaddr));
-    me.sin_family = AF_INET;
-    me.sin_addr.s_addr = INADDR_ANY;
+    if(af == AF_INET) {
+      memset(&me, 0, sizeof(me));
+      me.sin_family = AF_INET;
+      me.sin_addr.s_addr = INADDR_ANY;
 
-    sock = (struct sockaddr *)&me;
-    socksize = sizeof(struct sockaddr);
+      sock = (struct sockaddr *)&me;
+      socksize = sizeof(me);
 
+    }
+#ifdef ENABLE_IPV6
+    else { /* AF_INET6 */
+      memset(&me6, 0, sizeof(me6));
+      me6.sin6_family = AF_INET6;
+      /* in6addr_any isn't always available and since me6 has just been
+         cleared, it's not strictly necessary to use it here */
+      /*me6.sin6_addr = in6addr_any;*/
+
+      sock = (struct sockaddr *)&me6;
+      socksize = sizeof(me6);
+    }
+#endif
   }
   else
     /* no local kind of binding was requested */
@@ -423,20 +439,23 @@ static CURLcode bindlocal(struct connectdata *conn,
 
     /* Set port number to bind to, 0 makes the system pick one */
     if(sock->sa_family == AF_INET)
-      ((struct sockaddr_in *)sock)->sin_port = htons(port);
+      me.sin_port = htons(port);
 #ifdef ENABLE_IPV6
     else
-      ((struct sockaddr_in6 *)sock)->sin6_port = htons(port);
+      me6.sin6_port = htons(port);
 #endif
 
     if( bind(sockfd, sock, socksize) >= 0) {
       /* we succeeded to bind */
       struct Curl_sockaddr_storage add;
-      socklen_t size;
-
-      size = sizeof(add);
+      socklen_t size = sizeof(add);
+      memset(&add, 0, sizeof(struct Curl_sockaddr_storage));
       if(getsockname(sockfd, (struct sockaddr *) &add, &size) < 0) {
-        failf(data, "getsockname() failed");
+        data->state.os_errno = error = SOCKERRNO;
+        failf(data, "getsockname() failed with errno %d: %s",
+              error, Curl_strerror(conn, error));
+        if(h)
+          Curl_resolv_unlock(data, h);
         return CURLE_INTERFACE_FAILED;
       }
       /* We re-use/clobber the port variable here below */
@@ -448,6 +467,8 @@ static CURLcode bindlocal(struct connectdata *conn,
 #endif
       infof(data, "Local port: %d\n", port);
       conn->bits.bound = TRUE;
+      if(h)
+        Curl_resolv_unlock(data, h);
       return CURLE_OK;
     }
     if(--portnum > 0) {
@@ -458,11 +479,13 @@ static CURLcode bindlocal(struct connectdata *conn,
       break;
   } while(1);
 
-  data->state.os_errno = SOCKERRNO;
-  failf(data, "bind failure: %s",
-        Curl_strerror(conn, data->state.os_errno));
-  return CURLE_INTERFACE_FAILED;
+  data->state.os_errno = error = SOCKERRNO;
+  failf(data, "bind failed with errno %d: %s",
+        error, Curl_strerror(conn, error));
+  if(h)
+    Curl_resolv_unlock(data, h);
 
+  return CURLE_INTERFACE_FAILED;
 }
 
 /*
@@ -532,25 +555,6 @@ static bool verifyconnect(curl_socket_t sockfd, int *error)
   return rc;
 }
 
-CURLcode Curl_store_ip_addr(struct connectdata *conn)
-{
-  char addrbuf[256];
-  Curl_printable_address(conn->ip_addr, addrbuf, sizeof(addrbuf));
-
-  /* save the string */
-  Curl_safefree(conn->ip_addr_str);
-  conn->ip_addr_str = strdup(addrbuf);
-  if(!conn->ip_addr_str)
-    return CURLE_OUT_OF_MEMORY; /* FAIL */
-
-#ifdef PF_INET6
-  if(conn->ip_addr->ai_family == PF_INET6)
-    conn->bits.ipv6 = TRUE;
-#endif
-
-  return CURLE_OK;
-}
-
 /* Used within the multi interface. Try next IP address, return TRUE if no
    more address exists or error */
 static bool trynextip(struct connectdata *conn,
@@ -577,8 +581,7 @@ static bool trynextip(struct connectdata *conn,
       /* store the new socket descriptor */
       conn->sock[sockindex] = sockfd;
       conn->ip_addr = ai;
-
-      return Curl_store_ip_addr(conn) != CURLE_OK;
+      break;
     }
     ai = ai->ai_next;
   }
@@ -735,6 +738,7 @@ singleipconnect(struct connectdata *conn,
                 long timeout_ms,
                 bool *connected)
 {
+  struct Curl_sockaddr_ex addr;
   char addr_buf[128];
   int rc;
   int error;
@@ -742,66 +746,85 @@ singleipconnect(struct connectdata *conn,
   struct SessionHandle *data = conn->data;
   curl_socket_t sockfd;
   CURLcode res;
-  /*
-   * Curl_sockaddr_storage, which is basically sockaddr_storage has a space
-   * for a largest possible struct sockaddr only. We should add some space for
-   * the other fields we are using. Hence the addr_storage size math.
-   */
-  char addr_storage[sizeof(struct curl_sockaddr)-
-                    sizeof(struct sockaddr)+
-                    sizeof(struct Curl_sockaddr_storage)];
-  struct curl_sockaddr *addr=(struct curl_sockaddr*)&addr_storage;
   const void *iptoprint;
+  struct sockaddr_in * const sa4 = (void *)&addr.sa_addr;
+#ifdef ENABLE_IPV6
+  struct sockaddr_in6 * const sa6 = (void *)&addr.sa_addr;
+#endif
 
-  addr->family=ai->ai_family;
-  addr->socktype=conn->socktype;
-  addr->protocol=ai->ai_protocol;
-  addr->addrlen =
-    (ai->ai_addrlen < (socklen_t)sizeof(struct Curl_sockaddr_storage)) ?
-     (unsigned int)ai->ai_addrlen : sizeof(struct Curl_sockaddr_storage);
-  memcpy(&addr->addr, ai->ai_addr, addr->addrlen);
+  /*
+   * The Curl_sockaddr_ex structure is basically libcurl's external API
+   * curl_sockaddr structure with enough space available to directly hold
+   * any protocol-specific address structures. The variable declared here
+   * will be used to pass / receive data to/from the fopensocket callback
+   * if this has been set, before that, it is initialized from parameters.
+   */
 
-  /* If set, use opensocket callback to get the socket */
-  if(data->set.fopensocket)
-    sockfd = data->set.fopensocket(data->set.opensocket_client,
-                                   CURLSOCKTYPE_IPCXN, addr);
-  else
-    sockfd = socket(addr->family, addr->socktype, addr->protocol);
-  if(sockfd == CURL_SOCKET_BAD)
-    return CURL_SOCKET_BAD;
+  addr.family = ai->ai_family;
+  addr.socktype = conn->socktype;
+  addr.protocol = ai->ai_protocol;
+  addr.addrlen = ai->ai_addrlen;
+
+  if(addr.addrlen > sizeof(struct Curl_sockaddr_storage))
+     addr.addrlen = sizeof(struct Curl_sockaddr_storage);
+  memcpy(&addr.sa_addr, ai->ai_addr, addr.addrlen);
 
   *connected = FALSE; /* default is not connected */
 
-#ifdef CURLRES_IPV6
-  if (conn->scope && (addr->family == AF_INET6)) {
-    struct sockaddr_in6 *in6 = (struct sockaddr_in6 *)&addr->addr;
-    in6->sin6_scope_id = conn->scope;
-  }
+  if(data->set.fopensocket)
+   /*
+    * If the opensocket callback is set, all the destination address information
+    * is passed to the callback. Depending on this information the callback may
+    * opt to abort the connection, this is indicated returning CURL_SOCKET_BAD;
+    * otherwise it will return a not-connected socket. When the callback returns
+    * a valid socket the destination address information might have been changed
+    * and this 'new' address will actually be used here to connect.
+    */
+    sockfd = data->set.fopensocket(data->set.opensocket_client,
+                                   CURLSOCKTYPE_IPCXN,
+                                   (struct curl_sockaddr *)&addr);
+  else
+    /* opensocket callback not set, so simply create the socket now */
+    sockfd = socket(addr.family, addr.socktype, addr.protocol);
+
+  if(sockfd == CURL_SOCKET_BAD)
+    /* no socket, no connection */
+    return CURL_SOCKET_BAD;
+
+#ifdef ENABLE_IPV6
+  if (conn->scope && (addr.family == AF_INET6))
+    sa6->sin6_scope_id = conn->scope;
 #endif
 
   /* FIXME: do we have Curl_printable_address-like with struct sockaddr* as
      argument? */
 #if defined(HAVE_SYS_UN_H) && defined(AF_UNIX)
-  if(addr->family==AF_UNIX) {
+  if(addr.family == AF_UNIX) {
     infof(data, "  Trying %s... ",
-          ((const struct sockaddr_un*)(&addr->addr))->sun_path);
+          ((const struct sockaddr_un*)(&addr.sa_addr))->sun_path);
     snprintf(data->info.ip, MAX_IPADR_LEN, "%s",
-             ((const struct sockaddr_un*)(&addr->addr))->sun_path);
+             ((const struct sockaddr_un*)(&addr.sa_addr))->sun_path);
+    strcpy(conn->ip_addr_str, data->info.ip);
   }
   else
 #endif
   {
 #ifdef ENABLE_IPV6
-    if(addr->family==AF_INET6)
-      iptoprint= &((const struct sockaddr_in6*)(&addr->addr))->sin6_addr;
+    if(addr.family == AF_INET6) {
+      iptoprint = &sa6->sin6_addr;
+      conn->bits.ipv6 = TRUE;
+    }
     else
 #endif
-      iptoprint = &((const struct sockaddr_in*)(&addr->addr))->sin_addr;
+    {
+      iptoprint = &sa4->sin_addr;
+    }
 
-    if(Curl_inet_ntop(addr->family, iptoprint, addr_buf,
+    if(Curl_inet_ntop(addr.family, iptoprint, addr_buf,
                       sizeof(addr_buf)) != NULL) {
       infof(data, "  Trying %s... ", addr_buf);
       snprintf(data->info.ip, MAX_IPADR_LEN, "%s", addr_buf);
+      strcpy(conn->ip_addr_str, data->info.ip);
     }
   }
 
@@ -822,7 +845,7 @@ singleipconnect(struct connectdata *conn,
   }
 
   /* possibly bind the local end to an IP, interface or port */
-  res = bindlocal(conn, sockfd);
+  res = bindlocal(conn, sockfd, addr.family);
   if(res) {
     sclose(sockfd); /* close socket and bail out */
     return CURL_SOCKET_BAD;
@@ -833,7 +856,7 @@ singleipconnect(struct connectdata *conn,
 
   /* Connect TCP sockets, bind UDP */
   if(conn->socktype == SOCK_STREAM)
-    rc = connect(sockfd, &addr->addr, addr->addrlen);
+    rc = connect(sockfd, &addr.sa_addr, addr.addrlen);
   else
     rc = 0;
 

lib/connect.h

@@ -37,8 +37,6 @@ CURLcode Curl_connecthost(struct connectdata *conn,
                           Curl_addrinfo **addr, /* the one we used */
                           bool *connected); /* truly connected? */
 
-CURLcode Curl_store_ip_addr(struct connectdata *conn);
-
 /* generic function that returns how much time there's left to run, according
    to the timeouts set */
 long Curl_timeleft(struct connectdata *conn,

lib/content_encoding.c

@@ -89,7 +89,7 @@ inflate_stream(struct connectdata *conn,
 
   /* Dynamically allocate a buffer for decompression because it's uncommonly
      large to hold on the stack */
-  decomp = (char*)malloc(DSIZ);
+  decomp = malloc(DSIZ);
   if(decomp == NULL) {
     return exit_zlib(z, &k->zlib_init, CURLE_OUT_OF_MEMORY);
   }