7.15.1 with the now to be announced security flaw fixed

issues in the code.

.cvsignore

@@ -12,3 +12,4 @@ depcomp
 config.guess
 config.sub
 ltmain.sh
+libcurl.pc

CHANGES

@@ -7,6 +7,548 @@
                                   Changelog
 
 
+
+Version 7.15.1 (7 December 2005)
+
+Daniel (6 December 2005)
+- Full text here: http://curl.haxx.se/docs/adv_20051207.html Pointed out by
+  Stefan Esser.
+
+  VULNERABILITY
+
+  libcurl's URL parser function can overflow a malloced buffer in two ways, if
+  given a too long URL.
+
+  These overflows happen if you
+ 
+  1 - pass in a URL with no protocol (like "http://") prefix, using no slash
+      and the string is 256 bytes or longer. This leads to a single zero byte
+      overflow of the malloced buffer.
+
+  2 - pass in a URL with only a question mark as separator (no slash) between
+      the host and the query part of the URL. This leads to a single zero byte
+      overflow of the malloced buffer.
+
+  Both overflows can be made with the same input string, leading to two single
+  zero byte overwrites.
+
+  The affected flaw cannot be triggered by a redirect, but the long URL must
+  be passed in "directly" to libcurl. It makes this a "local" problem. Of
+  course, lots of programs may still pass in user-provided URLs to libcurl
+  without doing much syntax checking of their own, allowing a user to exploit
+  this vulnerability.
+
+  There is no known exploit at the time of this writing.
+
+
+Daniel (2 December 2005)
+- Jamie Newton pointed out that libcurl's file:// code would close() a zero
+  file descriptor if given a non-existing file.
+
+Daniel (24 November 2005)
+- Doug Kaufman provided a set of patches to make curl build fine on DJGPP
+  again using configure.
+
+- Yang Tse provided a whole series of patches to clear up compiler warnings on
+  MSVC 6.
+
+Daniel (17 November 2005)
+- I extended a patch from David Shaw to make libcurl _always_ provide an error
+  string in the given error buffer to address the flaw mention on 21 sep 2005.
+
+Daniel (16 November 2005)
+- Applied Albert Chin's patch that makes the libcurl.pc pkgconfig file get
+  installed on 'make install' time.
+
+Daniel (14 November 2005)
+- Quagmire reported that he needed to raise a NTLM buffer for SSPI to work
+  properly for a case, and so we did. We raised it even for non-SSPI builds
+  but it should not do any harm. http://curl.haxx.se/bug/view.cgi?id=1356715
+
+- Jan Kunder's debian bug report
+  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=338680 identified a weird
+  error message for when you try to upload a file and the requested directory
+  doesn't exist on the target server.
+
+- Yang Tse fixed compiler warnings in lib/ssluse.c with OpenSSL 0.9.8 and in
+  lib/memdebug.h that showed up in his msvc builds.
+
+Daniel (13 November 2005)
+- Debian bug report 338681 by Jan Kunder: make curl better detect and report
+  bad limit-rate units:
+  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=338681 Now curl will return
+  error if a bad unit is used.
+
+- Thanks to this nice summary of poll() implementations:
+  http://www.greenend.org.uk/rjk/2001/06/poll.html and further tests by Eugene
+  Kotlyarov, we now know that cygwin's poll returns only POLLHUP on remote
+  connectin closure so we check for that case (too) and re-enable poll for
+  cygwin builds.
+
+Daniel (12 November 2005)
+- Eugene Kotlyarov found out that cygwin's poll() function isn't doing things
+  right: http://curl.haxx.se/mail/archive-2005-11/0045.html so we now disable
+  poll() and use select() on cygwin too (we already do the same choice on Mac
+  OS X)
+
+- Dima Barsky patched problem #1348930: the GnuTLS code completely ignored
+  client certificates! (http://curl.haxx.se/bug/view.cgi?id=1348930).
+
+Daniel (10 November 2005)
+- David Lang fixed IPv6 support for TFTP!
+
+- Introducing range stepping to the curl globbing support. Now you can specify
+  step counter by adding :[num] within the brackets when specifying a range:
+
+   [1-100:10]
+   [a-z:2]
+
+  If no step counter is set, it defaults to 1 as before:
+
+   [1-100]
+   [d-h]
+
+Daniel (8 November 2005)
+- Removed the use of AI_CANONNAME in the IPv6-enabled resolver functions since
+  we really have no use for reverse lookups of the address.
+
+  I truly hope these are the last reverse lookups we had lingering in the
+  code!
+
+- Dmitry Bartsevich discovered some issues in compatibilty of SSPI-enabled
+  version of libcurl with different Windows versions. Current version of
+  libcurl imports SSPI functions from secur32.dll. However, under Windows NT
+  4.0 these functions are located in security.dll, under Windows 9x - in
+  secur32.dll and Windows 2000 and XP contains both these DLLs (security.dll
+  just forwards calls to secur32.dll).
+
+  Dmitry's patch loads proper library dynamically depending on Windows
+  version. Function InitSecurityInterface() is used to obtain pointers to all
+  of SSPI function in one structure.
+
+Daniel (31 October 2005)
+- Vilmos Nebehaj improved libcurl's LDAP abilities:
+
+  The LDAP code in libcurl can't handle LDAP servers of LDAPv3 nor binary
+  attributes in LDAP objects. So, I made a quick patch to address these
+  problems.
+
+  The solution is simple: if we connect to an LDAP server, first try LDAPv3
+  (which is the preferred protocol as of now) and then fall back to LDAPv2.
+  In case of binary attributes, we first convert them to base64, just like the
+  openldap client does. It uses ldap_get_values_len() instead of
+  ldap_get_values() to be able to retrieve binary attributes correctly. I
+  defined the necessary LDAP macros in lib/ldap.c to be able to compile
+  libcurl without the presence of libldap
+
+Daniel (27 October 2005)
+- Nis Jorgensen filed bug report #1338648
+  (http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a
+  feature request, but anyway. It pointed out that --max-redirs did not allow
+  it to be set to 0, which then would return an error code on the first
+  Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
+  set to 0, or -1 for infinity. Added test case 274 to verify.
+
+- tommink[at]post.pl reported in bug report #1337723
+  (http://curl.haxx.se/bug/view.cgi?id=1337723) that curl could not upload
+  binary data from stdin on Windows if the data contained control-Z (hex 1a)
+  since that is treated as end-of-file when read in text mode. Gisle Vanem
+  pointed out the fix, and I made both -T and --data-binary take advantage of
+  it.
+
+- Jaz Fresh pointed out that if you used "-r [number]" as was wrongly described
+  in the man page, curl would send an invalid HTTP Range: header. The correct
+  way would be to use "-r [number]-" or even "-r -[number]". Starting now,
+  curl will warn if this is discovered, and automatically append a dash to the
+  range before passing it to libcurl.
+
+Daniel (25 October 2005)
+- Amol Pattekar reported a bug with great detail and a fine example in bug
+  #1326306 (http://curl.haxx.se/bug/view.cgi?id=1326306). When using the multi
+  interface and connecting to a host with multiple IP addresses, and one of
+  the addresses fails to connect (the server must exist and respond, just not
+  accept connections) libcurl leaks a socket descriptor. Thanks to the fine
+  report, I could find and fix this.
+
+Daniel (22 October 2005)
+- Dima Barsky reported a problem with GnuTLS-enabled libcurl in bug report
+  #1334338 (http://curl.haxx.se/bug/view.cgi?id=1334338). When reading an SSL
+  stream from a server and the server requests a "rehandshake", the current
+  code simply returns this as an error. I have no good way to test this, but
+  I've added a crude attempt of dealing with this situation slightly better -
+  it makes a blocking handshake if this happens. Done like this because fixing
+  this the "proper" way (that would handshake asynchronously) will require
+  quite some work and I really need a good way to test this to do such a
+  change.
+
+Daniel (21 October 2005)
+- "Ofer" reported a problem when libcurl re-used a connection and failed to do
+  it, it could then accidentally actually crash. Presumably, this concerns FTP
+  connections.  http://curl.haxx.se/bug/view.cgi?id=1330310
+
+- Temprimus improved the MSVC makefile so that the static debug SSL libs are
+  linked to the executable and not to the libcurld.lib
+  http://curl.haxx.se/bug/view.cgi?id=1326676
+
+- Bradford Bruce made the windows resolver code properly return
+  CURLE_COULDNT_RESOLVE_PROXY and CURLE_COULDNT_RESOLVE_HOST on resolving
+  errors (as documented).
+
+Daniel (20 October 2005)
+- Dave Dribin made libcurl understand and handle cases when the server
+  (wrongly) sends *two* WWW-Authenticate headers for Digest. While this should
+  never happen in a sane world, libcurl previously got into an infinite loop
+  when this occurred. Dave added test 273 to verify this.
+
+- Temprimus improved the MSVC makefile: "makes a build option available so if
+  you set rtlibcfg=static for the make, then it would build with /MT. The
+  default behaviour is /MD (the original)."
+  http://curl.haxx.se/bug/view.cgi?id=1326665
+
+Daniel (14 October 2005)
+- Reverted the LIBCURL_VERSION_NUM change from October 6. As Dave Dribin
+  reported, the define is used by the configure script and is assumed to use
+  the 0xYYXXZZ format. This made "curl-config --vernum" fail in the 7.15.0
+  release version.
+
+Version 7.15.0 (13 October 2005)
+
+Daniel (12 October 2005)
+- Michael Sutton of iDEFENSE reported and I fixed a securitfy flaw in the NTLM
+  code that would overflow a buffer if given a too long user name or domain
+  name. This would happen if you enable NTLM authentication and either
+
+  A - pass in a user name and domain name to libcurl that together are longer
+      than 192 bytes
+
+  B - allow (lib)curl to follow HTTP "redirects" (Location: and the
+      appropriate HTTP 30x response code) and the new URL contains a URL with
+      a user name and domain name that together are longer than 192 bytes
+
+  See http://curl.haxx.se/docs/security.html for further details and updates
+
+Daniel (5 October 2005)
+- Darryl House reported a problem with using -z to download files from FTP.
+  It turned out that if the given time stamp was exact the same as the remote
+  time stamp, the file would still wrongly be downloaded. Added test case 272
+  to verify.
+
+Daniel (4 October 2005)
+- Domenico Andreoli fixed a man page malformat and removed odd (0xa0) bytes
+  from the configure script.
+
+- Michael Wallner reported that the date parser had wrong offset stored for
+  the MEST and CEST time zones.
+
+Daniel (27 September 2005)
+- David Yan filed bug #1299181 (http://curl.haxx.se/bug/view.cgi?id=1299181)
+  that identified a silly problem with Content-Range: headers with the 'bytes'
+  keyword written in a different case than all lowercase! It would cause a
+  segfault!
+
+- TJ Saunders of the proftpd project identified and pointed out problems with
+  the modified FTPS negotiation change of August 19 2005. Thus, we revert the
+  change back to pre-7.14.1 status.
+
+Daniel (21 September 2005)
+- Fixed "cut off" sentence in the libcurl-tutorial man page:
+  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=329305
+
+- Clarified in the curl_easy_setopt man page what the default
+  CURLOPT_WRITEFUNCTION and CURLOPT_WRITEDATA mean:
+  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=329311
+
+- Clarified in the curl_easy_setopt man page that CURLOPT_ERRORBUFFER
+  sometimes doesn't fill in the buffer even though it is supposed to:
+  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=329313
+
+- When CURLE_URL_MALFORMAT is returned due to a missing URL, it now has an
+  error string set.
+
+Daniel (19 September 2005)
+- Dmitry Bartsevich made the SSPI support work on Windows 9x as well.
+
+Daniel (15 September 2005)
+- Added a TFTP server to the test suite and made the test suite capable of
+  using it.
+
+Daniel (7 September 2005)
+- Ben Madsen's detailed reports that funnily enough only occurred with certain
+  glibc versions turned out to be curl using an already closed file handle
+  during certain conditions (like when saving FTP server "headers").
+
+- Scott Davis helped me track down a problem in the test HTTP server that made
+  test case 56 wrongly fail at times. It turned out it was due to the server
+  finding the end of a chunked-encoded POST too early.
+
+Daniel (6 September 2005)
+- Now curl warns if an unknown variable is used in the -w/--writeout argument.
+
+Daniel (4 September 2005)
+- I applied Nicolas Fran<61>ois' man page patch he posted to the Debian bug
+  tracker. It corrected two lines that started with apostrophes, which isn't
+  legal nroff format. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=326511
+
+- Added --ftp-skip-pasv-ip to the command line tool, that sets the new
+  CURLOPT_FTP_SKIP_PASV_IP option. It makes libcurl re-use the control
+  connection's IP address when setting up the data connection instead of
+  extractting the IP address from the PASV response. It has turned out this
+  feature is frequently needed by people to circumvent silly servers and silly
+  firewalls, especially when FTPS is used and the PASV command-response is
+  sent encrtyped.
+
+  Sponsored by CU*Answers
+
+Daniel (1 September 2005)
+- John Kelly added TFTP support to libcurl. A bunch of new error codes was
+  added. TODO: add them to docs. add TFTP server to test suite. add TFTP to
+  list of protocols whereever those are mentioned.
+
+Version 7.14.1 (1 September 2005)
+
+Daniel (29 August 2005)
+- Kevin Lussier pointed out a problem with curllib.dsp and how to fix it.
+
+- Igor Polyakov fixed a rather nasty problem with the threaded name resolver
+  for Windows, that could lead to an Access Violation when the multi interface
+  was used due to an issue with how the resolver thread was and was not
+  terminated.
+
+- Simon Josefsson brought a patch that allows curl to get built to use GNU GSS
+  instead of MIT/Heimdal for GSS capabilities.
+
+Daniel (24 August 2005)
+- Toby Peterson added CURLOPT_IGNORE_CONTENT_LENGTH to the library, accessible
+  from the command line tool with --ignore-content-length. This will make it
+  easier to download files from Apache 1.x (and similar) servers that are
+  still having problems serving files larger than 2 or 4 GB. When this option
+  is enabled, curl will simply have to wait for the server to close the
+  connection to signal end of transfer. I wrote test case 269 that runs a
+  simple test to verify that this works.
+
+- (Trying hard to exclude emotions now.) valgrind version 3 suddenly renamed
+  the --logfile command line option to --log-file, and thus the test script
+  valgrind autodetection now has yet another version check to do and then it
+  alters the valgrind command line accordingly.
+
+- Fixed CA cert verification using GnuTLS with the default bundle, which
+  previously failed due to GnuTLS not allowing x509 v1 CA certs by default.
+  Ralph Mitchell reported.
+
+Daniel (19 August 2005)
+- Norbert Novotny had problems with FTPS and he helped me work out a patch
+  that made curl run fine in his end. The key was to make sure we do the
+  SSL/TLS negotiation immediately after the TCP connect is done and not after
+  a few other commands have been sent like we did previously. I don't consider
+  this change necessary to obey the standards, I think this server is pickier
+  than what the specs allow it to be, but I can't see how this modified
+  libcurl code can add any problems to those who are interpreting the
+  standards more liberally.
+
+Daniel (17 August 2005)
+- Jeff Pohlmeyer found out that if you ask libcurl to load a cookiefile (with
+  CURLOPT_COOKIEFILE), add a cookie (with CURLOPT_COOKIELIST), tell it to
+  write the result to a given cookie jar and then never actually call
+  curl_easy_perform() - the given file(s) to read was never read but the
+  output file was written and thus it caused a "funny" result.
+
+- While doing some tests for the bug above, I noticed that Firefox generates
+  large numbers (for the expire time) in the cookies.txt file and libcurl
+  didn't treat them properly. Now it does.
+
+Daniel (15 August 2005)
+- Added more verbose "warning" messages to the curl client for cases where it
+  fails to open/read files etc to help users diagnose why it doesn't do what
+  you'd expect it to. Converted lots of old messages to use the new generic
+  function I wrote for this purpose.
+
+Daniel (13 August 2005)
+- James Bursa identified a libcurl HTTP bug and a good way to repeat it. If a
+  site responds with bad HTTP response that doesn't contain any header at all,
+  only a response body, and the write callback returns 0 to abort the
+  transfer, it didn't have any real effect but the write callback would be
+  called once more anyway.
+
+Daniel (12 August 2005)
+- Based on Richard Clayton's reports, I found out that using curl -d @filename
+  when 'filename' was not possible to access made curl use a GET request
+  instead.
+
+- The time condition illegal syntax warning is now inhibited if -s is used.
+
+Daniel (10 August 2005)
+- Mario Schroeder found out that one of the debug callbacks calls that regards
+  SSL data with the CURLINFO_TEXT type claimed that the data was one byte
+  larger than it actually is, thus falsely telling the application that the
+  terminating zero was part of the data.
+
+Daniel (9 August 2005)
+- Christopher R. Palmer fixed the offsets used for date parsings when the time
+  zone name of a daylight savings time was used. For example, PDT vs PDS. This
+  flaw was introduced with the new date parser (11 sep 2004 - 7.12.2).
+  Fortunately, no web server or cookie string etc should be using such time
+  zone names thus limiting the effect of this bug.
+
+Daniel (8 August 2005)
+- Jon Grubbs filed bug report #1249962
+  (http://curl.haxx.se/bug/view.cgi?id=1249962) which identified a problem
+  with NTLM on a HTTP proxy if an FTP URL was given. libcurl now properly
+  switches to pure HTTP internally when an HTTP proxy is used, even for FTP
+  URLs. The problem would also occur with other multi-pass auth methods.
+
+Daniel (7 August 2005)
+- When curl is built with GnuTLS, curl-config didn't include "SSL" when
+  --features was used.
+
+Daniel (28 July 2005)
+- If any of the options CURLOPT_HTTPGET, CURLOPT_POST and CURLOPT_HTTPPOST is
+  set to 1, CURLOPT_NOBODY will now automatically be set to 0.
+
+Daniel (27 July 2005)
+- Dan Fandrich changes over the last week: fixed numerous minor configure
+  option parsing flaws: --without-gnutls, --without-spnego --without-gssapi
+  and --without-krb4. Spellfixed several error messages.
+
+- Peteris Krumins added CURLOPT_COOKIELIST and CURLINFO_COOKIELIST, which is a
+  simple interface to extracting and setting cookies in libcurl's internal
+  "cookie jar". See the new cookie_interface.c example code.
+
+Daniel (13 July 2005)
+- Diego Casorran provided patches to make curl build fine on Amiga again.
+
+Daniel (12 July 2005)
+- Adrian Schuur added trailer support in the chunked encoding stream. The
+  trailer is then sent to the normal header callback/stream. I wrote up test
+  case 266 to verify the basic functionality. Do note that test case 34
+  contains a flawed chunked encoding stream that still works the same.
+
+Daniel (5 July 2005)
+- Gisle Vanem came up with a nice little work-around for bug #1230118
+  (http://curl.haxx.se/bug/view.cgi?id=1230118). It seems the Windows (MSVC)
+  libc time functions may return data one hour off if TZ is not set and
+  automatic DST adjustment is enabled. This made curl_getdate() return wrong
+  value, and it also concerned internal cookie expirations etc.
+
+Daniel (4 July 2005)
+- Andrew Bushnell provided enough info for me to tell that we badly needed to
+  fix the CONNECT authentication code with multi-pass auth methods (such as
+  NTLM) as it didn't previously properly ignore response-bodies - in fact it
+  stopped reading after all response headers had been received. This could
+  lead to libcurl sending the next request and reading the body from the first
+  request as response to the second request. (I also renamed the function,
+  which wasn't strictly necessary but...)
+
+  The best fix would to once and for all make the CONNECT code use the
+  ordinary request sending/receiving code, treating it as any ordinary request
+  instead of the special-purpose function we have now. It should make it
+  better for multi-interface too. And possibly lead to less code...
+
+  Added test case 265 for this. It doesn't work as a _really_ good test case
+  since the test proxy is too stupid, but the test case helps when running the
+  debugger to verify.
+
+Daniel (30 June 2005)
+- Dan Fandrich improved the configure script's ability to figure out what kind
+  of strerror_r() API that is used when cross-compiling. If __GLIB__ is
+  defined, it assumes the glibc API. If not, it issues a notice as before that
+  the user needs to manually edit lib/config.h for this.
+
+Daniel (23 June 2005)
+- David Shaw's fix that unifies proxy string treatment so that a proxy given
+  with CURLOPT_PROXY can use a http:// prefix and user + password. The user
+  and password fields are now also URL decoded properly. Test case 264 added
+  to verify.
+
+Daniel (22 June 2005)
+- David Shaw updated libcurl.m4
+
+Daniel (14 June 2005)
+- Gisle Vanem fixed a potential thread handle leak. Bug report #1216500
+  (http://curl.haxx.se/bug/view.cgi?id=1216500).  Comment in
+  http://curl.haxx.se/mail/lib-2005-06/0059.html
+
+Daniel (13 June 2005)
+- Made buildconf run libtoolize in the ares dir too (inspired by Tupone's
+  reverted patch).
+
+Daniel (9 June 2005)
+- Incorporated Tupone's findtool fix in buildconf (slightly edited)
+
+- Incorporated Tupone's head -n fix in buildconf.
+
+Daniel (8 June 2005)
+- Reverted Tupone's patch again, it broke numerous autobuilds. Let's apply it
+  in pieces, one by one and see what we need to adjust to work all over.
+
+Daniel (6 June 2005)
+- Tupone Alfredo fixed three problems in buildconf:
+
+  1) findtool does look per tool in PATH and think ./perl is the perl
+  executable, while is just a local directory (I have . in the PATH)
+
+  2) I got several warning for head -1 deprecated in favour of head -n 1
+ 
+  3) ares directory is missing some file (missing is missing :-) ) because
+  automake and friends is not run.
+
+Daniel (3 June 2005)
+- Added docs/libcurl/getinfo-times, based on feedback from 'Edi':
+  http://curl.haxx.se/feedback/display.cgi?id=11178325798299&support=yes
+
+- Andres Garcia provided yet another text mode patch for several test cases so
+  that they do text comparisions better on Windows (newline-wise).
+
+Daniel (1 June 2005)
+- The configure check for c-ares now adds the cares lib before the other libs,
+  to make it build fine with mingw. Inspired by Tupone Alfredo's bug report
+  and patch: http://curl.haxx.se/bug/view.cgi?id=1212940
+
+Daniel (31 May 2005)
+- Todd Kulesza reported a flaw in the proxy option, since a numerical IPv6
+  address was not possible to use. It is now, but requires it written
+  RFC2732-style, within brackets - which incidently is how you enter numerical
+  IPv6 addresses in URLs. Test case 263 added to verify.
+
+Daniel (30 May 2005)
+- Eric Cooper reported about a problem with HTTP servers that responds with
+  binary zeroes within the headers. They confused libcurl to do wrong so the
+  downloaded headers become incomplete. The fix is now verified with test case
+  262. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=310948
+
+Daniel (25 May 2005)
+- Fixed problems with the test suite, and in particular the FTP test cases
+  since it previously was failing every now and then in a nonsense manner.
+
+- --trace-time now outputs the full microsecond, all 6 digits.
+
+Daniel (24 May 2005)
+- Andres Garcia provided a text mode patch for several test cases so that they
+  do text comparisions better on Windows (newline-wise).
+
+- Any 2xx response (and not just 200) is now considered a fine response to
+  TYPE, as some servers obviously sends a 226 there. Added test case 261 to
+  verify. Based on a question/report by Georg Wicherski.
+
+Daniel (20 May 2005)
+- Improved runtests.pl to allow stdout tests to be mode=text as well, just
+  as file comparisons already supports. Added this info to the FILEFORMAT
+  docs.
+
+Daniel (18 May 2005)
+- John McGowan identified a problem in bug report #1204435
+  (http://curl.haxx.se/bug/view.cgi?id=1204435) with malformed URLs like
+  "http://somehost?data" as it added a slash too much in the request ("GET
+  /?data/"...). Added test case 260 to verify.
+
+- The configure check for strerror_r() failed to detect the proper API at
+  times, like on HP-UX 10.20. Then lib/strerror.c badly assumed the glibc
+  version if the posix define wasn't set (since it _had_ found a strerror_r).
+
+Daniel (16 May 2005)
+- The gmtime_r() function in HP-UX 10.20 is broken. About 13 test cases fail
+  due to this. There's now a configure check that attempts to detect the bad
+  function and not use it on such systems.
+
 Version 7.14.0 (16 May 2005)
 
 Daniel (13 May 2005)
@@ -19,8 +561,9 @@ Daniel (12 May 2005)
 - When doing a second request (after a disconnect) using the same easy handle,
   over a proxy that uses NTLM authentication, libcurl failed to use NTLM again
   properly (the auth method was accidentally reset to the same as had been set
-  for host auth, which defaults to Basic). Bug report #1200661 identified the
-  the problem and the fix.
+  for host auth, which defaults to Basic). Bug report #1200661
+  (http://curl.haxx.se/bug/view.cgi?id=1200661) identified the the problem and
+  the fix.
 
 - If -z/--time-cond is used with an invalid date syntax, this is no longer
   silently discarded. Instead a proper warning message is diplayed that

Makefile.am

@@ -31,6 +31,9 @@ bin_SCRIPTS = curl-config
 SUBDIRS = lib src
 DIST_SUBDIRS = $(SUBDIRS) tests include packages docs
 
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libcurl.pc
+
 dist-hook:
 	rm -rf $(top_builddir)/tests/log
 	find $(distdir) -name "*.dist" -exec rm {} \;

Makefile.dist

@@ -200,9 +200,21 @@ netware:
 	$(MAKE) -C lib -f Makefile.netware
 	$(MAKE) -C src -f Makefile.netware
 
+netware-ares:
+	$(MAKE) -C lib -f Makefile.netware WITH_ARES=1
+	$(MAKE) -C src -f Makefile.netware WITH_ARES=1
+
 netware-ssl:
-	$(MAKE) -C lib -f Makefile.netware SSL=1
-	$(MAKE) -C src -f Makefile.netware SSL=1
+	$(MAKE) -C lib -f Makefile.netware WITH_SSL=1
+	$(MAKE) -C src -f Makefile.netware WITH_SSL=1
+
+netware-ssl-zlib:
+	$(MAKE) -C lib -f Makefile.netware WITH_SSL=1 WITH_ZLIB=1
+	$(MAKE) -C src -f Makefile.netware WITH_SSL=1 WITH_ZLIB=1
+
+netware-zlib:
+	$(MAKE) -C lib -f Makefile.netware WITH_ZLIB=1
+	$(MAKE) -C src -f Makefile.netware WITH_ZLIB=1
 
 netware-clean:
 	$(MAKE) -C lib -f Makefile.netware clean

README

@@ -26,50 +26,39 @@ CONTACT
   If you have problems, questions, ideas or suggestions, please contact us
   by posting to a suitable mailing list. See http://curl.haxx.se/mail/
 
-  Many major contributors to the project are listed in the THANKS document.
+  All contributors to the project are listed in the THANKS document.
 
 WEB SITE
 
-  Visit the curl web site or mirrors for the latest news:
+  Visit the curl web site or mirrors for the latest news and downloads:
 
-        Sweden    -- http://curl.haxx.se/
-        Australia -- http://curl.planetmirror.com/
-        Austria   -- http://curl.gds.tuwien.ac.at/
-        Denmark   -- http://curl.cofman.dk/
-        Estonia   -- http://curl.wildyou.net/
-        France    -- http://curl.mirror.internet.tp/
-        Germany   -- http://curl.kgt.org/
-        Germany   -- http://curl.mirror.at.stealer.net/
-        Germany   -- http://curl.netmirror.org/
-        Russia    -- http://curl.tsuren.net/
-        Taiwan    -- http://curl.cs.pu.edu.tw/
-        Thailand  -- http://curl.siamu.ac.th/
-        US (CA)   -- http://curl.mirror.redwire.net/
-        US (CA)   -- http://curl.mirrormonster.com/
-        US (CA)   -- http://curl.signal42.com/
-        US (TX)   -- http://curl.109k.com/
-
-DOWNLOAD
-
-  The official download mirror sites are:
-
-        Australia -- http://curl.planetmirror.com/download.html
-        Austria   -- http://curl.gds.tuwien.ac.at/download.html
-        Estonia   -- http://curl.wildyou.net/download.html
-        Germany   -- ftp://ftp.fu-berlin.de/pub/unix/network/curl/
-        Germany   -- http://curl.mirror.at.stealer.net/download.html
-        Germany   -- http://curl.netmirror.org/download.html
-        Germany   -- http://www.mirrorspace.org/curl/
-        Hongkong  -- http://www.execve.net/curl/
-        Russia    -- http://curl.tsuren.net/download.html
-        Sweden    -- ftp://ftp.sunet.se/pub/www/utilities/curl/
-        Sweden    -- http://cool.haxx.se/curl/
-        Taiwan    -- http://curl.cs.pu.edu.tw/download.html
-        Thailand  -- http://curl.siamu.ac.th/download.html
-        US (CA)   -- http://curl.mirror.redwire.net/download.html
-        US (CA)   -- http://curl.mirrormonster.com/download.html
-        US (CA)   -- http://curl.signal42.com/download.html
-        US (TX)   -- http://curl.109k.com/download.html
+        Sweden       http://curl.haxx.se/
+        Australia    http://curl.planetmirror.com/
+        Austria      http://curl.gds.tuwien.ac.at/
+        Denmark      http://curl.cofman.dk/
+        France       http://curl.fastmirror.net/
+        Germany      http://curl.miscellaneousmirror.org/
+        Germany      http://curl.mirror.at.stealer.net/
+        Germany      http://curl.mirroring.de/
+        Germany      http://curl.mons-new-media.de/
+        Germany      http://curl.triplemind.com/
+        Germany      http://curl.freemirror.de/
+        Netherlands  http://curl.nedmirror.nl/
+        Russia       http://curl.tsuren.net/
+        Taiwan       http://curl.cs.pu.edu.tw/
+        Thailand     http://curl.siamu.ac.th/
+        US (AZ)      http://curl.islandofpoker.com/
+        US (CA)      http://curl.mirror.redwire.net/
+        US (CA)      http://curl.mirrormonster.com/
+        US (CA)      http://curl.signal42.com/
+        US (CA)      http://curl.tolix.org/
+        US (CA)      http://curl.webhosting76.com/
+        US (CA)      http://curl.meulie.net/
+        US (FL)      http://curl.hoxt.com/
+        US (TX)      http://curl.109k.com/
+        US (TX)      http://curl.mirrors.cyberservers.net/
+        US (TX)      http://curl.seekmeup.com/
+        US (TX)      http://curl.hostingzero.com/
 
 CVS
 

RELEASE-NOTES

@@ -1,58 +1,61 @@
-Curl and libcurl 7.14.0
+Curl and libcurl 7.15.1
 
- Public curl release number:               88
- Releases counted from the very beginning: 115
- Available command line options:           107
- Available curl_easy_setopt() options:     122
+ Public curl release number:               91
+ Releases counted from the very beginning: 118
+ Available command line options:           109
+ Available curl_easy_setopt() options:     125
  Number of public functions in libcurl:    46
- Amount of public web site mirrors:        23
- Number of known libcurl bindings:         31
- Number of contributors:                   437
+ Amount of public web site mirrors:        27
+ Number of known libcurl bindings:         32
+ Number of contributors:                   459
 
 This release includes the following changes:
 
- o modified default HTTP request headers
- o curl --trace-time added for time stamping trace logs
- o curl now respects the SSL_CERT_DIR and SSL_CERT_PATH environment variables
- o more search paths for curl's default .curlrc config file check
- o GnuTLS support, use configure --with-gnutls. Work on this was sponsored
-   by The Written Word.
+ o the libcurl.pc pkgconfig file now gets installed on make install
+ o URL globbing now offers "range steps": [1-100:10]
+ o LDAPv3 is now the preferred LDAP protocol version
+ o --max-redirs and CURLOPT_MAXREDIRS set to 0 limits redirects
+ o improved MSVC makefile
 
 This release includes the following bugfixes:
 
- o uses select() instead of poll() even on Mac OS X 10.4
- o reconnected proxy use with NTLM auth on the same handle
- o warns about bad -z date syntax
- o docs/THANKS now contains all known contributors
- o builds out-of-the-box on (presumably ipv6-enabled) AIX 4.3 hosts
- o curl --head could wrongly complain on bad chunked-encoding
- o --interface SIGSEGVed on a bad address
- o kill the HTTPS server better when stopping the test suite
- o builds fine with VS2005 on x64
- o auth fix for HTTP redirects and .netrc usage
- o FTP uploads show the progress meter easier
- o MSVC makefile fixes for static libcurl builds
- o configure fix for static libcurl build on Windows
- o --retry-delay
- o POST with read callback now uses Expect: 100-continue
- o CURLOPT_PORT didn't actually use the set port number
- o HTTP 304 response with Content-Length: header
- o time-conditioned FTP uploads
+ o buffer overflow problem: http://curl.haxx.se/docs/adv_20051207.html
+ o using file:// on non-existing files are properly handled
+ o builds fine on DJGPP
+ o CURLOPT_ERRORBUFFER is now always filled in on errors
+ o curl outputs error on bad --limit-rate units
+ o fixed libcurl's use of poll() on cygwin
+ o the GnuTLS code didn't support client certificates
+ o TFTP over IPv6 works
+ o no reverse lookups on IP addresses when ipv6-enabled
+ o SSPI compatibility fix: using the proper DLLs
+ o binary LDAP properties are now shown base64 encoded
+ o Windows uploads from stdin using curl can now contain ctrl-Z bytes
+ o -r [num] would produce an invalid HTTP Range: header
+ o multi interface with multi IP hosts could leak socket descriptors
+ o the GnuTLS code didn't handle rehandshakes
+ o re-use of a dead FTP connection
+ o name resolve error codes fixed for Windows builds
+ o double WWW-Authenticate Digest headers are now handled
+ o curl-config --vernum fixed
 
 Other curl-related news since the previous public release:
 
- o http://curl.mirroring.de/ is a new german curl mirror
- o pycurl 7.13.2: http://pycurl.sf.net/
- o TclCurl 0.13.2: http://personal1.iddeo.es/andresgarci/tclcurl/english/
- o http://curl.webhosting76.com/ is a new US curl mirror
- o http://curl.meulie.net/ is a new Canadian curl mirror
+ o FTP-SSL is now RFC4217
+ o CurlPas 2005-11-05 was released: http://curlpas.sf.net/
+ o pycurl 7.15.0 was released http://pycurl.sf.net
+ o New web mirrors:
+   http://curl.triplemind.com/ located in Mannheim, Germany
+   http://curl.nedmirror.nl located in Amsterdam, the Netherlands
+   http://curl.hoxt.com located in Florida, US
 
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Christophe Legry, Cory Nelson, Gisle Vanem, Dan Fandrich, Toshiyuki Maezawa,
- Olivier, Andres Garcia, Dave Dribin, Alex Suykov, Cory Nelson, Fred New,
- Paul Moore, Alexander Zhuravlev, Bryan Henderson, Jeremy Brown, Allan,
- Grigory Entin
+ Dave Dribin, Bradford Bruce, Temprimus, Ofer, Dima Barsky, Amol Pattekar, Jaz
+ Fresh, tommink[at]post.pl, Gisle Vanem, Nis Jorgensen, Vilmos Nebehaj, Dmitry
+ Bartsevich, David Lang, Eugene Kotlyarov, Jan Kunder, Yang Tse, Quagmire,
+ Albert Chin, David Shaw, Doug Kaufman, Bryan Henderson, Jamie Newton, Stefan
+ Esser
 
         Thanks! (and sorry if I forgot to mention someone)

TODO-RELEASE

@@ -1,40 +1,7 @@
-Issues not sorted in any particular order.
-
-To get fixed in 7.14.0 (planned release: May/June 2005)
+To get fixed in 7.15.0 (planned release: November 2005)
 ======================
 
-   - Make the tests run better on more platforms.
+60 - CONNECT 407 responses that kills the connection (not very likely though)
 
-To get fixed in 7.14.1 (planned release: June 2005)
-======================
+63 - 
 
-58 - Fix KNOWN_BUGS #19: "FTP 3rd party transfers with the multi interface
-     doesn't work"
-
-47 - Peter Sylvester's patch for SRP on the TLS layer
-     Awaits OpenSSL support for this, no need to support this in libcurl before
-     there's an OpenSSL release that does it.
-
-To get fixed in 7.15.0
-======================
-
-55 - Add a function to the multi interface that gets file descriptors, as an
-     alternative to the curl_multi_fdset(). This is necessary to allow apps to
-     properly avoid the FD_SETSIZE problem.
-
-56 - Make curl_easy_perform() a wrapper-function that simply creates a multi
-     handle, adds the easy handle to it, runs curl_multi_perform() until the
-     transfer is done, then detach the easy handle, destroy the multi handle
-     and return the easy handle's return code. This will thus make everything
-     internally use and assume the multi interface. The select()-loop should
-     use the new function from (55).
-
-To get fixed in 7.16.0
-======================
-
-57 - Add an interface to libcurl for getting and setting cookies from an easy
-     handle. One idea: http://curl.haxx.se/mail/lib-2004-12/0195.html the
-     older idea: http://curl.haxx.se/dev/COOKIES. We need to settle on some
-     middle ground I guess.
-
-60 - 

acinclude.m4

@@ -141,6 +141,9 @@ AC_DEFUN([TYPE_SOCKADDR_STORAGE],
 #endif
 #ifdef HAVE_ARPA_INET_H
 #include <arpa/inet.h>
+#endif
+#ifdef HAVE_WINSOCK2_H
+#include <winsock2.h>
 #endif
    ])
 
@@ -192,8 +195,7 @@ AC_DEFUN([TYPE_SOCKLEN_T],
 ])
 
 dnl Check for in_addr_t: it is used to receive the return code of inet_addr()
-dnl and a few other things. If not found, we set it to unsigned int, as even
-dnl 64-bit implementations use to set it to a 32-bit type.
+dnl and a few other things.
 AC_DEFUN([TYPE_IN_ADDR_T],
 [
    AC_CHECK_TYPE([in_addr_t], ,[
@@ -417,34 +419,25 @@ dnl      int strerror_r(int errnum, char *buf, size_t n);
 dnl
 AC_DEFUN([CURL_CHECK_STRERROR_R],
 [
-  dnl determine of strerror_r is present
-  AC_CHECK_FUNCS(strerror_r,[
+  AC_CHECK_FUNCS(strerror_r)
+
+  if test "x$ac_cv_func_strerror_r" = "xyes"; then
+
     AC_MSG_CHECKING(whether strerror_r is declared)
     AC_EGREP_CPP(strerror_r,[
 #include <string.h>],[
-      strerror_r="yes"
       AC_MSG_RESULT(yes)],[
       AC_MSG_RESULT(no)
-      AC_MSG_CHECKING(whether strerror_r with -D_THREAD_SAFE is declared)
+      AC_MSG_CHECKING(whether strerror_r with -D_REENTRANT is declared)
       AC_EGREP_CPP(strerror_r,[
-#define _THREAD_SAFE
+#define _REENTRANT
 #include <string.h>],[
-        strerror_r="yes"
-	CPPFLAGS="-D_THREAD_SAFE $CPPFLAGS"
+	CPPFLAGS="-D_REENTRANT $CPPFLAGS"
 	AC_MSG_RESULT(yes)],
-	AC_MSG_RESULT(no))])])
-
-  if test "x$strerror_r" = "xyes"; then
-
-    dnl check if strerror_r is properly declared in the headers
-    AC_CHECK_DECL(strerror_r, ,
-     AC_DEFINE(HAVE_NO_STRERROR_R_DECL, 1, [we have no strerror_r() proto])
-,
-[#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-])
+	AC_MSG_RESULT(no)
+        AC_DEFINE(HAVE_NO_STRERROR_R_DECL, 1, [we have no strerror_r() proto])
+       ) dnl with _THREAD_SAFE
+    ]) dnl plain cpp for it
 
     dnl determine if this strerror_r() is glibc or POSIX
     AC_MSG_CHECKING([for a glibc strerror_r API])
@@ -466,8 +459,20 @@ main () {
     AC_DEFINE(HAVE_GLIBC_STRERROR_R, 1, [we have a glibc-style strerror_r()])
     AC_MSG_RESULT([yes]),
     AC_MSG_RESULT([no]),
-    dnl cross-compiling!
-    AC_MSG_NOTICE([cannot determine strerror_r() style: edit lib/config.h manually!])
+
+    dnl Use an inferior method of strerror_r detection while cross-compiling
+    AC_EGREP_CPP(yes, [
+#include <features.h>
+#ifdef __GLIBC__
+yes
+#endif
+], 
+      dnl looks like glibc, so assume a glibc-style strerror_r()
+      GLIBC_STRERROR_R="1"
+      AC_DEFINE(HAVE_GLIBC_STRERROR_R, 1, [we have a glibc-style strerror_r()])
+      AC_MSG_RESULT([yes]),
+      AC_MSG_NOTICE([cannot determine strerror_r() style: edit lib/config.h manually!])
+    ) dnl while cross-compiling
     )
 
     if test -z "$GLIBC_STRERROR_R"; then
@@ -756,15 +761,18 @@ AC_DEFUN([CURL_CC_DEBUG_OPTS],
          fi
 
          dnl -Wunreachable-code seems totally unreliable on my gcc 3.3.2 on
-         dnl on i686-Linux as it gives us heaps with false positives
+         dnl on i686-Linux as it gives us heaps with false positives.
+         dnl Also, on gcc 4.0.X it is totally unbearable and complains all
+         dnl over making it unusable for generic purposes. Let's not use it.
+
          if test "$gccnum" -ge "303"; then
            dnl gcc 3.3 and later
            WARN="$WARN -Wendif-labels -Wstrict-prototypes"
          fi
 
          if test "$gccnum" -ge "304"; then
-           # try -Wunreachable-code on gcc 3.4
-           WARN="$WARN -Wunreachable-code"
+           # try these on gcc 3.4
+           WARN="$WARN -Wdeclaration-after-statement"
          fi
 
          for flag in $CPPFLAGS; do

ares/CHANGES

@@ -1,5 +1,57 @@
   Changelog for the c-ares project
 
+* November 25
+
+- Yang Tse fixed some send() / recv() compiler warnings
+
+* September 18
+
+- Added constants that will be used by ares_getaddrinfo
+
+- Made ares_getnameinfo use the reentrant getservbyport (getservbyport_r) if it is
+  available to ensure it works properly in a threaded environment.
+
+* September 10
+
+- configure fix for detecting a member in the sockaddr_in6 struct which failed
+  on ipv6-enabled HP-UX 11.00
+
+Version 1.3.0 (August 29, 2004)
+
+* August 21
+
+- Alfredo Tupone provided a fix for the Windows code in get_iphlpapi_dns_info()
+  when getting the DNS server etc.
+
+* June 19
+
+- Added some checks for the addrinfo structure.
+
+* June 2
+
+- William Ahern:
+
+  Make UDP sockets non-blocking. I've confirmed that at least on Linux 2.4 a
+  read event can come back from poll() on a valid SOCK_DGRAM socket but
+  recv(2) will still block. This patch doesn't ignore EAGAIN in
+  read_udp_packets(), though maybe it should. (This patch was edited by Daniel
+  Stenberg and a new configure test was added (imported from curl's configure)
+  to properly detect what non-blocking socket approach to use.)
+
+  I'm not quite sure how this was happening, but I've been seeing PTR queries
+  which seem to return empty responses. At least, they were empty when calling
+  ares_expand_name() on the record. Here's a patch which guarantees to
+  NUL-terminate the expanded name. The old behavior failed to NUL-terminate if
+  len was 0, and this was causing strlen() to run past the end of the buffer
+  after calling ares_expand_name() and getting ARES_SUCCESS as the return
+  value. If q is not greater than *s then it's equal and *s is always
+  allocated with at least one byte.
+
+* May 16
+
+- Added ares_getnameinfo which mimics the getnameinfo API (another feature
+  that could use testing).
+
 * May 14
 
 - Added an inet_ntop function from BIND for systems that do not have it.

ares/FILES

@@ -13,6 +13,7 @@ Makefile.in
 Makefile.dj
 Makefile.m32
 Makefile.netware
+Makefile.vc6
 install-sh
 mkinstalldirs
 configure

ares/Makefile.am

@@ -4,10 +4,9 @@ lib_LTLIBRARIES = libcares.la
 
 man_MANS = $(MANPAGES)
 
-MSVCFILES = vc/adig/adig.dep vc/adig/adig.dsp vc/adig/adig.mak	\
- vc/adig/adig.plg vc/vc.dsw vc/ahost/ahost.dep vc/ahost/ahost.dsp	\
- vc/ahost/ahost.mak vc/ahost/ahost.plg vc/areslib/areslib.dep		\
- vc/areslib/areslib.dsp vc/areslib/areslib.mak vc/areslib/areslib.plg
+MSVCFILES = vc/adig/adig.dep vc/adig/adig.dsp vc/vc.dsw vc/ahost/ahost.dep \
+ vc/ahost/ahost.dsp vc/areslib/areslib.dep vc/areslib/areslib.dsp	   \
+ vc/areslib/areslib.dsw
 
 # adig and ahost are just sample programs and thus not mentioned with the
 # regular sources and headers
@@ -15,7 +14,7 @@ EXTRA_DIST = CHANGES README.cares Makefile.inc adig.c ahost.c $(man_MANS) \
  $(MSVCFILES) AUTHORS
 
 
-VER=-version-info 0:0:0
+VER=-version-info 1:0:0
 # This flag accepts an argument of the form current[:revision[:age]]. So,
 # passing -version-info 3:12:1 sets current to 3, revision to 12, and age to
 # 1.

ares/Makefile.dj

@@ -9,7 +9,12 @@ include Makefile.inc
 WATT32_ROOT = $(subst \,/,$(WATT_ROOT))
 
 CC      = gcc
-CFLAGS  = -O2 -Wall -DWATT32 -Dselect=select_s -I$(WATT32_ROOT)/inc
+CFLAGS  = -O2 -Wall -DWATT32 -Dselect=select_s -DHAVE_AF_INET6 \
+          -DHAVE_PF_INET6 -DHAVE_IOCTLSOCKET -DHAVE_STRUCT_IN6_ADDR \
+          -DHAVE_STRUCT_SOCKADDR_IN6 -DHAVE_STRUCT_ADDRINFO \
+          -DHAVE_ARPA_NAMESER_H -DNS_INADDRSZ=4 \
+          -DHAVE_SOCKADDR_IN6_SIN6_SCOPE_ID -I$(WATT32_ROOT)/inc
+
 LDFLAGS = -s
 EX_LIBS = $(WATT32_ROOT)/lib/libwatt.a
 

ares/Makefile.inc

@@ -1,17 +1,18 @@
-CSOURCES = ares_fds.c ares_process.c ares_free_hostent.c ares_query.c	   \
-ares__close_sockets.c ares_free_string.c ares_search.c ares__get_hostent.c \
-ares_gethostbyaddr.c ares_send.c ares__read_line.c ares_gethostbyname.c	   \
-ares_strerror.c ares_cancel.c ares_init.c ares_timeout.c ares_destroy.c	   \
-ares_mkquery.c ares_version.c ares_expand_name.c ares_parse_a_reply.c	   \
-windows_port.c ares_expand_string.c ares_parse_ptr_reply.c                 \
-ares_parse_aaaa_reply.c inet_net_pton.c bitncmp.c inet_ntop.c
-
-HHEADERS = ares.h ares_private.h setup.h ares_dns.h ares_version.h nameser.h \
-           inet_net_pton.h ares_ipv6.h bitncmp.h
-
-MANPAGES= ares_destroy.3 ares_expand_name.3 ares_expand_string.3 ares_fds.3 \
- ares_free_hostent.3 ares_free_string.3 ares_gethostbyaddr.3		    \
- ares_gethostbyname.3 ares_init.3 ares_init_options.3 ares_mkquery.3	    \
- ares_parse_a_reply.3 ares_parse_ptr_reply.3 ares_process.3		    \
- ares_query.3 ares_search.3 ares_send.3 ares_strerror.3 ares_timeout.3	    \
- ares_version.3 ares_cancel.3 ares_parse_aaaa_reply.3
+CSOURCES = ares_fds.c ares_process.c ares_free_hostent.c ares_query.c       \
+ares__close_sockets.c ares_free_string.c ares_search.c ares__get_hostent.c  \
+ares_gethostbyaddr.c ares_send.c ares__read_line.c ares_gethostbyname.c     \
+ares_strerror.c ares_cancel.c ares_init.c ares_timeout.c ares_destroy.c     \
+ares_mkquery.c ares_version.c ares_expand_name.c ares_parse_a_reply.c       \
+windows_port.c ares_expand_string.c ares_parse_ptr_reply.c                  \
+ares_parse_aaaa_reply.c ares_getnameinfo.c inet_net_pton.c bitncmp.c        \
+inet_ntop.c
+
+HHEADERS = ares.h ares_private.h setup.h ares_dns.h ares_version.h          \
+           nameser.h inet_net_pton.h inet_ntop.h ares_ipv6.h bitncmp.h
+
+MANPAGES= ares_destroy.3 ares_expand_name.3 ares_expand_string.3 ares_fds.3 \
+ ares_free_hostent.3 ares_free_string.3 ares_gethostbyaddr.3                \
+ ares_gethostbyname.3 ares_init.3 ares_init_options.3 ares_mkquery.3        \
+ ares_parse_a_reply.3 ares_parse_ptr_reply.3 ares_process.3                 \
+ ares_query.3 ares_search.3 ares_send.3 ares_strerror.3 ares_timeout.3      \
+ ares_version.3 ares_cancel.3 ares_parse_aaaa_reply.3 ares_getnameinfo.3

ares/Makefile.m32

@@ -7,29 +7,21 @@
 ## Quick hack by Guenter; comments to: /dev/nul
 
 CC = gcc
-AR = ar
 RANLIB = ranlib
-STRIP = strip -g
-#RM = rm -f 
 
 ########################################################
 ## Nothing more to do below this line!
 
 LIB=libcares.a
 CC=gcc
-#CPPFLAGS=@CPPFLAGS@
-WARN_FLAGS=-Wall
-CFLAGS=-O2
-CFLAGS+=${WARN_CFLAGS} ${ERROR_CFLAGS}
-DEFS=-DMINGW32
+CFLAGS=-O2 -Wall
 LDFLAGS=-s
 LIBS=-lwsock32
-ALL_CFLAGS=${CPPFLAGS} ${CFLAGS} ${DEFS}
 
 MANPAGES := $(patsubst %.c,%.o,$(wildcard ares_*.3))
 
 OBJS	:= $(patsubst %.c,%.o,$(wildcard ares_*.c))
-OBJS	+= windows_port.o
+OBJS	+= windows_port.o inet_ntop.o inet_net_pton.o bitncmp.o
 
 $(LIB): ${OBJS}
 	ar cru $@ ${OBJS}
@@ -51,7 +43,7 @@ ahost.exe: ahost.o $(LIB)
 ${OBJS}: ares.h ares_dns.h ares_private.h
 
 .c.o:
-	${CC} -c ${ALL_CFLAGS} $<
+	${CC} -c ${CFLAGS} $<
 
 check:
 
@@ -73,3 +65,4 @@ clean:
 
 distclean: clean
 	rm -f config.cache config.log config.status Makefile
+

ares/Makefile.netware

@@ -89,7 +89,7 @@ LDFLAGS	= -T
 AR	= ar
 ARFLAGS	= -cq
 CFLAGS	+= -fno-builtin -fpack-struct -fpcc-struct-return -fno-strict-aliasing
-CFLAGS	+= -Wall -Wno-format # -pedantic
+CFLAGS	+= -Wall -Wno-format -Wno-uninitialized # -pedantic
 ifeq ($(LIBARCH),LIBC)
 	PRELUDE = $(SDK_LIBC)/imports/libcpre.gcc.o
 else
@@ -104,7 +104,7 @@ SDK_LIBC = $(NDK_ROOT)/libc
 
 ifeq ($(LIBARCH),LIBC)
 	INCLUDES += -I$(SDK_LIBC)/include -I$(SDK_LIBC)/include/nks
-	INCLUDES += -I$(SDK_LIBC)/include/winsock
+	# INCLUDES += -I$(SDK_LIBC)/include/winsock
 	CFLAGS += -D_POSIX_SOURCE
 #	CFLAGS += -D__ANSIC__
 else
@@ -304,6 +304,8 @@ config.h: Makefile.netware
 	@echo $(DL)#define HAVE_AF_INET6 1$(DL) >> $@
 	@echo $(DL)#define HAVE_PF_INET6 1$(DL) >> $@
 	@echo $(DL)#define HAVE_STRUCT_IN6_ADDR 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRUCT_SOCKADDR_IN6 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRUCT_ADDRINFO 1$(DL) >> $@
 	@echo $(DL)#define SIZEOF_STRUCT_IN6_ADDR 16$(DL) >> $@
 	@echo $(DL)#define SIZEOF_STRUCT_IN_ADDR 4$(DL) >> $@
 ifdef NW_WINSOCK

ares/Makefile.vc6

@@ -0,0 +1,188 @@
+# $Id$
+#
+# C-ares makefile for MSVC6+
+# G. Vanem <giva@bgnett.no>.
+#
+
+CFG_MODEL   = MD
+DEBUG_MODEL = d
+USE_WATT32  = 0
+
+#
+# Configurations:
+#  -MD   - msvcrt.dll,  threads, release (normal)
+#  -MDd  - msvcrtd.dll, threads, debug
+#  -ML   - libc, no threads,     release
+#  -MLd  - libc, no threads,     debug
+#  -MT   - libc, threads,        release
+#  -MTd  - libc, threads,        debug
+
+CC = cl
+
+CFLAGS  = -nologo -$(CFG_MODEL)$(DEBUG_MODEL) -W2 -Yd -Zi
+LDFLAGS = -machine:i386 -map -warn:2
+
+OBJ_DIR  = VC6_obj
+DEF_FILE = cares.def
+
+!if "$(USE_WATT32)" == "1"
+CFLAGS  = $(CFLAGS) -UWIN32 -DWATT32 -I$(WATT_ROOT)\inc
+EX_LIBS = $(WATT_ROOT)\lib\wattcpvc_imp.lib
+
+!else
+CFLAGS  = $(CFLAGS) -DWIN32 -DWIN32_LEAN_AND_MEAN
+EX_LIBS = advapi32.lib ws2_32.lib
+!endif
+
+!if "$(DEBUG_MODEL)" == "d"
+CFLAGS  = $(CFLAGS) -D_DEBUG -GZ
+LDFLAGS = $(LDFLAGS) -debug -debugtype:coff -fixed:no
+
+!else
+CFLAGS  = $(CFLAGS) -O2 -Og
+LDFLAGS = $(LDFLAGS) -release
+!endif
+
+OBJECTS = $(OBJ_DIR)\ares_fds.obj              \
+          $(OBJ_DIR)\ares_process.obj          \
+          $(OBJ_DIR)\ares_free_hostent.obj     \
+          $(OBJ_DIR)\ares_query.obj            \
+          $(OBJ_DIR)\ares__close_sockets.obj   \
+          $(OBJ_DIR)\ares_free_string.obj      \
+          $(OBJ_DIR)\ares_search.obj           \
+          $(OBJ_DIR)\ares__get_hostent.obj     \
+          $(OBJ_DIR)\ares_gethostbyaddr.obj    \
+          $(OBJ_DIR)\ares_send.obj             \
+          $(OBJ_DIR)\ares__read_line.obj       \
+          $(OBJ_DIR)\ares_gethostbyname.obj    \
+          $(OBJ_DIR)\ares_getnameinfo.obj      \
+          $(OBJ_DIR)\ares_strerror.obj         \
+          $(OBJ_DIR)\ares_cancel.obj           \
+          $(OBJ_DIR)\ares_init.obj             \
+          $(OBJ_DIR)\ares_timeout.obj          \
+          $(OBJ_DIR)\ares_destroy.obj          \
+          $(OBJ_DIR)\ares_mkquery.obj          \
+          $(OBJ_DIR)\ares_version.obj          \
+          $(OBJ_DIR)\ares_expand_name.obj      \
+          $(OBJ_DIR)\ares_parse_a_reply.obj    \
+          $(OBJ_DIR)\ares_parse_aaaa_reply.obj \
+          $(OBJ_DIR)\windows_port.obj          \
+          $(OBJ_DIR)\ares_expand_string.obj    \
+          $(OBJ_DIR)\ares_parse_ptr_reply.obj  \
+          $(OBJ_DIR)\bitncmp.obj               \
+          $(OBJ_DIR)\inet_net_pton.obj         \
+          $(OBJ_DIR)\inet_ntop.obj
+
+all: $(OBJ_DIR) cares.lib cares.dll cares_imp.lib ahost.exe adig.exe
+
+$(OBJ_DIR):
+       mkdir $(OBJ_DIR)
+
+cares.lib: $(OBJECTS)
+       lib -nologo -out:$@ $(OBJECTS)
+
+cares_imp.lib cares.dll: $(DEF_FILE) $(OBJECTS)
+       link $(LDFLAGS) -dll -implib:cares_imp.lib -out:cares.dll \
+            -def:$(DEF_FILE) $(OBJECTS) $(EX_LIBS)
+
+$(DEF_FILE): $(OBJECTS) Makefile.VC6
+       @echo ; Generated. DO NOT EDIT  > $@
+       @echo LIBRARY cares.dll        >> $@
+       @echo EXPORTS                  >> $@
+       @echo   ares_cancel            >> $@
+       @echo   ares_destroy           >> $@
+       @echo   ares_expand_name       >> $@
+       @echo   ares_expand_string     >> $@
+       @echo   ares_fds               >> $@
+       @echo   ares_free_hostent      >> $@
+       @echo   ares_free_string       >> $@
+       @echo   ares_gethostbyaddr     >> $@
+       @echo   ares_gethostbyname     >> $@
+       @echo   ares_init              >> $@
+       @echo   ares_init_options      >> $@
+       @echo   ares_mkquery           >> $@
+       @echo   ares_parse_a_reply     >> $@
+       @echo   ares_parse_ptr_reply   >> $@
+       @echo   ares_process           >> $@
+       @echo   ares_query             >> $@
+       @echo   ares_search            >> $@
+       @echo   ares_strerror          >> $@
+       @echo   ares_strncasecmp       >> $@
+       @echo   ares_strcasecmp        >> $@
+       @echo   ares_timeout           >> $@
+       @echo   ares_version           >> $@
+       @echo   ares_inet_net_pton     >> $@
+       @echo   ares_inet_ntop         >> $@
+       @echo   ares_inet_pton         >> $@
+       @echo   ares_writev            >> $@
+       @echo   ares_getnameinfo       >> $@
+       @echo   ares_gettimeofday      >> $@
+       @echo   ares_parse_aaaa_reply  >> $@
+
+ahost.exe: $(OBJ_DIR)\ahost.obj cares_imp.lib
+       link $(LDFLAGS) -out:$@ $(OBJ_DIR)\ahost.obj cares_imp.lib $(EX_LIBS)
+
+adig.exe: $(OBJ_DIR)\adig.obj $(OBJ_DIR)\getopt.obj cares_imp.lib
+       link $(LDFLAGS) -out:$@ $(OBJ_DIR)\adig.obj $(OBJ_DIR)\getopt.obj cares_imp.lib $(EX_LIBS)
+
+clean:
+       - del $(OBJ_DIR)\*.obj *.ilk *.pdb *.pbt *.pbi *.pbo *._xe *.map
+
+vclean realclean: clean
+       - del $(DEF_FILE) cares.lib cares_imp.* cares.dll ahost.exe adig.exe
+       - rd $(OBJ_DIR)
+
+.c{$(OBJ_DIR)}.obj:
+       $(CC) $(CFLAGS) -Fo$*.obj -c $<
+
+#
+# Copyright "gcc -MM .."
+#
+$(OBJ_DIR)\ares_fds.obj: ares_fds.c setup.h ares.h ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares_process.obj: ares_process.c setup.h nameser.h ares.h ares_dns.h \
+  ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares_free_hostent.obj: ares_free_hostent.c setup.h ares.h ares_private.h \
+  ares_ipv6.h
+$(OBJ_DIR)\ares_query.obj: ares_query.c setup.h nameser.h ares.h ares_dns.h \
+  ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares__close_sockets.obj: ares__close_sockets.c setup.h ares.h \
+  ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares_free_string.obj: ares_free_string.c setup.h ares.h
+$(OBJ_DIR)\ares_search.obj: ares_search.c setup.h nameser.h ares.h ares_private.h \
+  ares_ipv6.h
+$(OBJ_DIR)\ares__get_hostent.obj: ares__get_hostent.c setup.h ares.h ares_private.h \
+  ares_ipv6.h inet_net_pton.h
+$(OBJ_DIR)\ares_gethostbyaddr.obj: ares_gethostbyaddr.c setup.h nameser.h ares.h \
+  ares_private.h ares_ipv6.h inet_net_pton.h
+$(OBJ_DIR)\ares_send.obj: ares_send.c setup.h nameser.h ares.h ares_dns.h \
+  ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares__read_line.obj: ares__read_line.c setup.h ares.h ares_private.h \
+  ares_ipv6.h
+$(OBJ_DIR)\ares_gethostbyname.obj: ares_gethostbyname.c setup.h nameser.h ares.h \
+  ares_private.h ares_ipv6.h inet_net_pton.h bitncmp.h
+$(OBJ_DIR)\ares_strerror.obj: ares_strerror.c setup.h ares.h
+$(OBJ_DIR)\ares_cancel.obj: ares_cancel.c setup.h ares.h ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares_init.obj: ares_init.c setup.h nameser.h ares.h ares_private.h \
+  ares_ipv6.h inet_net_pton.h
+$(OBJ_DIR)\ares_timeout.obj: ares_timeout.c setup.h ares.h ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares_destroy.obj: ares_destroy.c setup.h ares.h ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares_mkquery.obj: ares_mkquery.c setup.h nameser.h ares.h ares_dns.h
+$(OBJ_DIR)\ares_version.obj: ares_version.c setup.h ares_version.h
+$(OBJ_DIR)\ares_expand_name.obj: ares_expand_name.c setup.h nameser.h ares.h \
+  ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares_parse_a_reply.obj: ares_parse_a_reply.c setup.h nameser.h ares.h \
+  ares_dns.h ares_private.h ares_ipv6.h
+$(OBJ_DIR)\windows_port.obj: windows_port.c setup.h nameser.h ares.h ares_private.h \
+  ares_ipv6.h
+$(OBJ_DIR)\ares_expand_string.obj: ares_expand_string.c setup.h nameser.h ares.h \
+  ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares_parse_ptr_reply.obj: ares_parse_ptr_reply.c setup.h nameser.h ares.h \
+  ares_dns.h ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares_parse_aaaa_reply.obj: ares_parse_aaaa_reply.c setup.h nameser.h ares.h \
+  ares_dns.h inet_net_pton.h ares_private.h ares_ipv6.h
+$(OBJ_DIR)\ares_getnameinfo.obj: ares_getnameinfo.c setup.h nameser.h ares.h \
+  ares_private.h ares_ipv6.h inet_ntop.h
+$(OBJ_DIR)\inet_net_pton.obj: inet_net_pton.c setup.h nameser.h ares_ipv6.h \
+  inet_net_pton.h
+$(OBJ_DIR)\bitncmp.obj: bitncmp.c bitncmp.h
+$(OBJ_DIR)\inet_ntop.obj: inet_ntop.c setup.h nameser.h ares_ipv6.h inet_ntop.h

ares/acinclude.m4

@@ -1,3 +1,126 @@
+dnl Check for how to set a socket to non-blocking state. There seems to exist
+dnl four known different ways, with the one used almost everywhere being POSIX
+dnl and XPG3, while the other different ways for different systems (old BSD,
+dnl Windows and Amiga).
+dnl
+dnl There are two known platforms (AIX 3.x and SunOS 4.1.x) where the
+dnl O_NONBLOCK define is found but does not work. This condition is attempted
+dnl to get caught in this script by using an excessive number of #ifdefs...
+dnl
+AC_DEFUN([CURL_CHECK_NONBLOCKING_SOCKET],
+[
+  AC_MSG_CHECKING([non-blocking sockets style])
+
+  AC_TRY_COMPILE([
+/* headers for O_NONBLOCK test */
+#include <sys/types.h>
+#include <unistd.h>
+#include <fcntl.h>
+],[
+/* try to compile O_NONBLOCK */
+
+#if defined(sun) || defined(__sun__) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+# if defined(__SVR4) || defined(__srv4__)
+#  define PLATFORM_SOLARIS
+# else
+#  define PLATFORM_SUNOS4
+# endif
+#endif
+#if (defined(_AIX) || defined(__xlC__)) && !defined(_AIX4)
+# define PLATFORM_AIX_V3
+#endif
+
+#if defined(PLATFORM_SUNOS4) || defined(PLATFORM_AIX_V3) || defined(__BEOS__)
+#error "O_NONBLOCK does not work on this platform"
+#endif
+  int socket;
+  int flags = fcntl(socket, F_SETFL, flags | O_NONBLOCK);
+],[
+dnl the O_NONBLOCK test was fine
+nonblock="O_NONBLOCK"
+AC_DEFINE(HAVE_O_NONBLOCK, 1, [use O_NONBLOCK for non-blocking sockets])
+],[
+dnl the code was bad, try a different program now, test 2
+
+  AC_TRY_COMPILE([
+/* headers for FIONBIO test */
+#include <unistd.h>
+#include <stropts.h>
+],[
+/* FIONBIO source test (old-style unix) */
+ int socket;
+ int flags = ioctl(socket, FIONBIO, &flags);
+],[
+dnl FIONBIO test was good
+nonblock="FIONBIO"
+AC_DEFINE(HAVE_FIONBIO, 1, [use FIONBIO for non-blocking sockets])
+],[
+dnl FIONBIO test was also bad
+dnl the code was bad, try a different program now, test 3
+
+  AC_TRY_COMPILE([
+/* headers for ioctlsocket test (cygwin?) */
+#include <windows.h>
+],[
+/* ioctlsocket source code */
+ int socket;
+ unsigned long flags = ioctlsocket(socket, FIONBIO, &flags);
+],[
+dnl ioctlsocket test was good
+nonblock="ioctlsocket"
+AC_DEFINE(HAVE_IOCTLSOCKET, 1, [use ioctlsocket() for non-blocking sockets])
+],[
+dnl ioctlsocket didnt compile!, go to test 4
+
+  AC_TRY_LINK([
+/* headers for IoctlSocket test (Amiga?) */
+#include <sys/ioctl.h>
+],[
+/* IoctlSocket source code */
+ int socket;
+ int flags = IoctlSocket(socket, FIONBIO, (long)1);
+],[
+dnl ioctlsocket test was good
+nonblock="IoctlSocket"
+AC_DEFINE(HAVE_IOCTLSOCKET_CASE, 1, [use Ioctlsocket() for non-blocking sockets])
+],[
+dnl Ioctlsocket didnt compile, do test 5!
+  AC_TRY_COMPILE([
+/* headers for SO_NONBLOCK test (BeOS) */
+#include <socket.h>
+],[
+/* SO_NONBLOCK source code */
+ long b = 1;
+ int socket;
+ int flags = setsockopt(socket, SOL_SOCKET, SO_NONBLOCK, &b, sizeof(b));
+],[
+dnl the SO_NONBLOCK test was good
+nonblock="SO_NONBLOCK"
+AC_DEFINE(HAVE_SO_NONBLOCK, 1, [use SO_NONBLOCK for non-blocking sockets])
+],[
+dnl test 5 didnt compile!
+nonblock="nada"
+AC_DEFINE(HAVE_DISABLED_NONBLOCKING, 1, [disabled non-blocking sockets])
+])
+dnl end of fifth test
+
+])
+dnl end of forth test
+
+])
+dnl end of third test
+
+])
+dnl end of second test
+
+])
+dnl end of non-blocking try-compile test
+  AC_MSG_RESULT($nonblock)
+
+  if test "$nonblock" = "nada"; then
+    AC_MSG_WARN([non-block sockets disabled])
+  fi
+])
 
 dnl We create a function for detecting which compiler we use and then set as
 dnl pendantic compiler options as possible for that particular compiler. The
@@ -146,3 +269,50 @@ AC_DEFUN([CARES_CHECK_CONSTANT], [
 ])
 
 
+dnl This macro determines how many parameters getservbyport_r takes
+AC_DEFUN([CARES_CHECK_GETSERVBYPORT_R], [
+  AC_MSG_CHECKING([how many arguments getservbyport_r takes])
+  AC_TRY_COMPILE(
+    [#include <netdb.h>],
+    [
+      int p1, p5;
+      char *p2, p4[4096];
+      struct servent *p3, *p6;
+      getservbyport_r(p1, p2, p3, p4, p5, &p6);
+    ], ac_func_getservbyport_r=6,
+    [AC_TRY_COMPILE(
+      [#include <netdb.h>],
+      [
+        int p1, p5;
+        char *p2, p4[4096];
+        struct servent *p3;
+        getservbyport_r(p1, p2, p3, p4, p5);
+      ], ac_func_getservbyport_r=5,
+      [AC_TRY_COMPILE(
+        [#include <netdb.h>],
+        [
+          int p1;
+          char *p2;
+          struct servent *p3;
+          struct servent_data p4;
+          getservbyport_r(p1, p2, p3, &p4);
+        ], ac_func_getservbyport_r=4, ac_func_getservbyport_r=0
+      )]
+    )]
+  )
+if test $ac_func_getservbyport_r != "0" ; then
+  AC_MSG_RESULT($ac_func_getservbyport_r)
+  AC_DEFINE(HAVE_GETSERVBYPORT_R, 1, [Specifies whether getservbyport_r is present])
+  AC_DEFINE_UNQUOTED(GETSERVBYPORT_R_ARGS, $ac_func_getservbyport_r, [Specifies the number of arguments to 
+getservbyport_r])
+  if test $ac_func_getservbyport_r = "4" ; then
+   AC_DEFINE(GETSERVBYPORT_R_BUFSIZE, sizeof(struct servent_data), [Specifies the size of the buffer to pass to 
+getservbyport_r])
+  else
+   AC_DEFINE(GETSERVBYPORT_R_BUFSIZE, 4096, [Specifies the size of the buffer to pass to getservbyport_r])
+  fi
+else
+  AC_MSG_RESULT([not found])
+fi
+])
+

ares/adig.c

@@ -27,14 +27,23 @@
 #include <unistd.h>
 #include <netdb.h>
 #endif
+#ifdef HAVE_GETOPT_H
+#include <getopt.h>
+#endif
 
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <ctype.h>
 #include <errno.h>
+
 #include "ares.h"
 #include "ares_dns.h"
+#include "inet_ntop.h"
+
+#ifdef WATT32
+#undef WIN32  /* Redefined in MingW headers */
+#endif
 
 #ifndef INADDR_NONE
 #define INADDR_NONE 0xffffffff
@@ -45,8 +54,10 @@
 #define T_SRV 33 /* server selection */
 #endif
 
+#ifndef optind
 extern int optind;
 extern char *optarg;
+#endif
 
 struct nv {
   const char *name;
@@ -412,7 +423,7 @@ static const unsigned char *display_rr(const unsigned char *aptr,
   char *name;
   int type, dnsclass, ttl, dlen, status;
   long len;
-  struct in_addr addr;
+  char addr[46];
 
   /* Parse the RR name. */
   status = ares_expand_name(aptr, abuf, alen, &name, &len);
@@ -474,12 +485,12 @@ static const unsigned char *display_rr(const unsigned char *aptr,
       len = *p;
       if (p + len + 1 > aptr + dlen)
         return NULL;
-      printf("\t%.*s", len, p + 1);
+      printf("\t%.*s", (int)len, p + 1);
       p += len + 1;
       len = *p;
       if (p + len + 1 > aptr + dlen)
         return NULL;
-      printf("\t%.*s", len, p + 1);
+      printf("\t%.*s", (int)len, p + 1);
       break;
 
     case T_MINFO:
@@ -504,7 +515,7 @@ static const unsigned char *display_rr(const unsigned char *aptr,
        */
       if (dlen < 2)
         return NULL;
-      printf("\t%d", (aptr[0] << 8) | aptr[1]);
+      printf("\t%d", DNS__16BIT(aptr));
       status = ares_expand_name(aptr + 2, abuf, alen, &name, &len);
       if (status != ARES_SUCCESS)
         return NULL;
@@ -531,12 +542,9 @@ static const unsigned char *display_rr(const unsigned char *aptr,
       p += len;
       if (p + 20 > aptr + dlen)
         return NULL;
-      printf("\t\t\t\t\t\t( %d %d %d %d %d )",
-             (p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3],
-             (p[4] << 24) | (p[5] << 16) | (p[6] << 8) | p[7],
-             (p[8] << 24) | (p[9] << 16) | (p[10] << 8) | p[11],
-             (p[12] << 24) | (p[13] << 16) | (p[14] << 8) | p[15],
-             (p[16] << 24) | (p[17] << 16) | (p[18] << 8) | p[19]);
+      printf("\t\t\t\t\t\t( %lu %lu %lu %lu %lu )",
+             DNS__32BIT(p), DNS__32BIT(p+4), DNS__32BIT(p+8),
+             DNS__32BIT(p+12), DNS__32BIT(p+16));
       break;
 
     case T_TXT:
@@ -548,7 +556,7 @@ static const unsigned char *display_rr(const unsigned char *aptr,
           len = *p;
           if (p + len + 1 > aptr + dlen)
             return NULL;
-          printf("\t%.*s", len, p + 1);
+          printf("\t%.*s", (int)len, p + 1);
           p += len + 1;
         }
       break;
@@ -557,8 +565,14 @@ static const unsigned char *display_rr(const unsigned char *aptr,
       /* The RR data is a four-byte Internet address. */
       if (dlen != 4)
         return NULL;
-      memcpy(&addr, aptr, sizeof(struct in_addr));
-      printf("\t%s", inet_ntoa(addr));
+      printf("\t%s", ares_inet_ntop(AF_INET,aptr,addr,sizeof(addr)));
+      break;
+
+    case T_AAAA:
+      /* The RR data is a 16-byte IPv6 address. */
+      if (dlen != 16)
+        return NULL;
+      printf("\t%s", ares_inet_ntop(AF_INET6,aptr,addr,sizeof(addr)));
       break;
 
     case T_WKS:
@@ -583,6 +597,7 @@ static const unsigned char *display_rr(const unsigned char *aptr,
 
     default:
       printf("\t[Unknown RR; cannot parse]");
+      break;
     }
   printf("\n");
 

ares/ahost.c

@@ -29,13 +29,23 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+
 #include "ares.h"
 #include "ares_dns.h"
+#include "inet_ntop.h"
+#include "inet_net_pton.h"
 
 #ifndef INADDR_NONE
 #define INADDR_NONE 0xffffffff
 #endif
 
+#ifndef HAVE_STRUCT_IN6_ADDR
+struct in6_addr
+{
+  unsigned char s6_addr[16];
+};
+#endif
+
 static void callback(void *arg, int status, struct hostent *host);
 static void usage(void);
 
@@ -45,7 +55,8 @@ int main(int argc, char **argv)
   int status, nfds;
   fd_set read_fds, write_fds;
   struct timeval *tvp, tv;
-  struct in_addr addr;
+  struct in_addr addr4;
+  struct in6_addr addr6;
 
 #ifdef WIN32
   WORD wVersionRequested = MAKEWORD(1,1);
@@ -66,13 +77,20 @@ int main(int argc, char **argv)
   /* Initiate the queries, one per command-line argument. */
   for (argv++; *argv; argv++)
     {
-      addr.s_addr = inet_addr(*argv);
-      if (addr.s_addr == INADDR_NONE)
-        ares_gethostbyname(channel, *argv, AF_INET, callback, *argv);
+      if (ares_inet_pton(AF_INET, *argv, &addr4) == 1)
+        {
+          ares_gethostbyaddr(channel, &addr4, sizeof(addr4), AF_INET, callback,
+                             *argv);
+        }
+      else if (ares_inet_pton(AF_INET6, *argv, &addr6) == 1)
+        {
+          ares_gethostbyaddr(channel, &addr6, sizeof(addr6), AF_INET6, callback,
+                             *argv);
+        }
       else
         {
-          ares_gethostbyaddr(channel, &addr, sizeof(addr), AF_INET, callback,
-                             *argv);
+          /* assume user wants A-records */
+          ares_gethostbyname(channel, *argv, AF_INET, callback, *argv);
         }
     }
 
@@ -95,7 +113,6 @@ int main(int argc, char **argv)
 
 static void callback(void *arg, int status, struct hostent *host)
 {
-  struct in_addr addr;
   char **p;
 
   if (status != ARES_SUCCESS)
@@ -106,8 +123,21 @@ static void callback(void *arg, int status, struct hostent *host)
 
   for (p = host->h_addr_list; *p; p++)
     {
-      memcpy(&addr, *p, sizeof(struct in_addr));
-      printf("%-32s\t%s\n", host->h_name, inet_ntoa(addr));
+      char addr_buf[46] = "??";
+
+      ares_inet_ntop(host->h_addrtype, *p, addr_buf, sizeof(addr_buf));
+      printf("%-32s\t%s", host->h_name, addr_buf);
+#if 0
+      if (host->h_aliases[0])
+        {
+           int i;
+
+	   printf (", Aliases: ");
+	   for (i = 0; host->h_aliases[i]; i++)
+               printf("%s ", host->h_aliases[i]);
+        }
+#endif
+      puts("");
     }
 }
 

ares/ares.h

@@ -29,12 +29,14 @@
 
 #if defined(WATT32)
   #include <netinet/in.h>
+  #include <sys/socket.h>
   #include <tcp.h>
 #elif defined(WIN32)
-  #include <winsock.h>
+  #include <winsock2.h>
   #include <windows.h>
 #else
   #include <netinet/in.h>
+  #include <sys/socket.h>
 #endif
 
 #ifdef  __cplusplus
@@ -64,6 +66,13 @@ extern "C" {
 #define ARES_EDESTRUCTION       16
 #define ARES_EBADSTR            17
 
+/* ares_getnameinfo error codes */
+#define ARES_EBADFLAGS          18
+
+/* ares_getaddrinfo error codes */
+#define ARES_ENONAME		19
+#define ARES_EBADHINTS		20
+
 /* Flag values */
 #define ARES_FLAG_USEVC         (1 << 0)
 #define ARES_FLAG_PRIMARY       (1 << 1)
@@ -85,6 +94,42 @@ extern "C" {
 #define ARES_OPT_DOMAINS        (1 << 7)
 #define ARES_OPT_LOOKUPS        (1 << 8)
 
+/* Nameinfo flag values */
+#define ARES_NI_NOFQDN                  (1 << 0)
+#define ARES_NI_NUMERICHOST             (1 << 1)
+#define ARES_NI_NAMEREQD                (1 << 2)
+#define ARES_NI_NUMERICSERV             (1 << 3)
+#define ARES_NI_DGRAM                   (1 << 4)
+#define ARES_NI_TCP                     0
+#define ARES_NI_UDP                     ARES_NI_DGRAM
+#define ARES_NI_SCTP                    (1 << 5)
+#define ARES_NI_DCCP                    (1 << 6)
+#define ARES_NI_NUMERICSCOPE            (1 << 7)
+#define ARES_NI_LOOKUPHOST              (1 << 8)
+#define ARES_NI_LOOKUPSERVICE           (1 << 9)
+/* Reserved for future use */
+#define ARES_NI_IDN			(1 << 10)
+#define ARES_NI_IDN_ALLOW_UNASSIGNED	(1 << 11)
+#define ARES_NI_IDN_USE_STD3_ASCII_RULES (1 << 12)
+
+/* Addrinfo flag values */
+#define ARES_AI_CANONNAME		(1 << 0)
+#define ARES_AI_NUMERICHOST		(1 << 1)
+#define ARES_AI_PASSIVE			(1 << 2)
+#define ARES_AI_NUMERICSERV		(1 << 3)
+#define ARES_AI_V4MAPPED		(1 << 4)
+#define ARES_AI_ALL			(1 << 5)
+#define ARES_AI_ADDRCONFIG		(1 << 6)
+/* Reserved for future use */
+#define ARES_AI_IDN			(1 << 10)
+#define ARES_AI_IDN_ALLOW_UNASSIGNED	(1 << 11)
+#define ARES_AI_IDN_USE_STD3_ASCII_RULES (1 << 12)
+#define ARES_AI_CANONIDN		(1 << 13)
+
+#define ARES_AI_MASK			(ARES_AI_CANONNAME|ARES_AI_NUMERICHOST|ARES_AI_PASSIVE| \
+				 	 ARES_AI_NUMERICSERV|ARES_AI_V4MAPPED|ARES_AI_ALL| \
+					 ARES_AI_ADDRCONFIG)
+
 struct ares_options {
   int flags;
   int timeout;
@@ -101,12 +146,15 @@ struct ares_options {
 
 struct hostent;
 struct timeval;
+struct sockaddr;
 struct ares_channeldata;
 typedef struct ares_channeldata *ares_channel;
 typedef void (*ares_callback)(void *arg, int status, unsigned char *abuf,
                               int alen);
 typedef void (*ares_host_callback)(void *arg, int status,
                                    struct hostent *hostent);
+typedef void (*ares_nameinfo_callback)(void *arg, int status,
+                                       char *node, char *service);
 
 int ares_init(ares_channel *channelptr);
 int ares_init_options(ares_channel *channelptr, struct ares_options *options,
@@ -123,7 +171,9 @@ void ares_gethostbyname(ares_channel channel, const char *name, int family,
                         ares_host_callback callback, void *arg);
 void ares_gethostbyaddr(ares_channel channel, const void *addr, int addrlen,
                         int family, ares_host_callback callback, void *arg);
-
+void ares_getnameinfo(ares_channel channel, const struct sockaddr *sa,
+                      socklen_t salen, int flags, ares_nameinfo_callback callback,
+                      void *arg);
 int ares_fds(ares_channel channel, fd_set *read_fds, fd_set *write_fds);
 struct timeval *ares_timeout(ares_channel channel, struct timeval *maxtv,
                              struct timeval *tv);

ares/ares_dns.h

@@ -18,6 +18,18 @@
 #ifndef ARES__DNS_H
 #define ARES__DNS_H
 
+#ifdef ARES_BIG_ENDIAN
+/* big-endian aware versions */
+#define DNS__16BIT(p)                   (((p)[1] << 8) | (p)[0])
+#define DNS__32BIT(p)                   (((p)[3] << 24) | ((p)[2] << 16) | \
+                                         ((p)[1] << 8) | (p)[0])
+#define DNS__SET16BIT(p, v)             (((p)[1] = ((v) >> 8) & 0xff), \
+                                         ((p)[0] = (v) & 0xff))
+#define DNS__SET32BIT(p, v)             (((p)[3] = ((v) >> 24) & 0xff), \
+                                         ((p)[2] = ((v) >> 16) & 0xff), \
+                                         ((p)[1] = ((v) >> 8) & 0xff), \
+                                         ((p)[0] = (v) & 0xff))
+#else
 #define DNS__16BIT(p)                   (((p)[0] << 8) | (p)[1])
 #define DNS__32BIT(p)                   (((p)[0] << 24) | ((p)[1] << 16) | \
                                          ((p)[2] << 8) | (p)[3])
@@ -27,6 +39,16 @@
                                          ((p)[1] = ((v) >> 16) & 0xff), \
                                          ((p)[2] = ((v) >> 8) & 0xff), \
                                          ((p)[3] = (v) & 0xff))
+#endif
+
+#if 0
+/* we cannot use this approach on systems where we can't access 16/32 bit
+   data on un-aligned addresses */
+#define DNS__16BIT(p)                   ntohs(*(unsigned short*)(p))
+#define DNS__32BIT(p)                   ntohl(*(unsigned long*)(p))
+#define DNS__SET16BIT(p, v)             *(unsigned short*)(p) = htons(v)
+#define DNS__SET32BIT(p, v)             *(unsigned long*)(p) = htonl(v)
+#endif
 
 /* Macros for parsing a DNS header */
 #define DNS_HEADER_QID(h)               DNS__16BIT(h)

ares/ares_expand_name.c

@@ -106,6 +106,8 @@ int ares_expand_name(const unsigned char *encoded, const unsigned char *abuf,
   /* Nuke the trailing period if we wrote one. */
   if (q > *s)
     *(q - 1) = 0;
+  else
+    *q = 0; /* zero terminate */
 
   return ARES_SUCCESS;
 }

ares/ares_fds.c

@@ -1,3 +1,5 @@
+/* $Id$ */
+
 /* Copyright 1998 by the Massachusetts Institute of Technology.
  *
  * Permission to use, copy, modify, and distribute this
@@ -44,13 +46,13 @@ int ares_fds(ares_channel channel, fd_set *read_fds, fd_set *write_fds)
             nfds = server->udp_socket + 1;
         }
       if (server->tcp_socket != ARES_SOCKET_BAD)
-        {
-          FD_SET(server->tcp_socket, read_fds);
-          if (server->qhead)
-            FD_SET(server->tcp_socket, write_fds);
-          if (server->tcp_socket >= nfds)
-            nfds = server->tcp_socket + 1;
-        }
+       {
+         FD_SET(server->tcp_socket, read_fds);
+         if (server->qhead)
+           FD_SET(server->tcp_socket, write_fds);
+         if (server->tcp_socket >= nfds)
+           nfds = server->tcp_socket + 1;
+	}
     }
   return (int)nfds;
 }

ares/ares_free_hostent.3

@@ -28,8 +28,8 @@ The
 .I ares_free_hostent
 function frees a
 .B struct hostent
-allocated by one of the functions \fIares_parse_a_reply(3)\fP or
-\fIares_parse_ptr_reply(3)\fP.
+allocated by one of the functions \fIares_parse_a_reply(3)\fP,
+\fIares_parse_aaaa_reply(3)\fP, or \fIares_parse_ptr_reply(3)\fP.
 .SH NOTES
 It is not necessary (and is not correct) to free the host structure passed to
 the callback functions for \fIares_gethostbyname(3)\fP or
@@ -37,6 +37,7 @@ the callback functions for \fIares_gethostbyname(3)\fP or
 host structures when the callback returns.
 .SH SEE ALSO
 .BR ares_parse_a_reply (3),
+.BR ares_parse_aaaa_reply (3),
 .BR ares_parse_ptr_reply (3)
 .SH AUTHOR
 Greg Hudson, MIT Information Systems

ares/ares_gethostbyaddr.c

@@ -1,3 +1,5 @@
+/* $Id$ */
+
 /* Copyright 1998 by the Massachusetts Institute of Technology.
  *
  * Permission to use, copy, modify, and distribute this
@@ -68,7 +70,7 @@ void ares_gethostbyaddr(ares_channel channel, const void *addr, int addrlen,
       return;
     }
 
-  if ((family == AF_INET && addrlen != sizeof(struct in_addr)) || 
+  if ((family == AF_INET && addrlen != sizeof(struct in_addr)) ||
       (family == AF_INET6 && addrlen != sizeof(struct in6_addr)))
     {
       callback(arg, ARES_ENOTIMP, NULL);
@@ -107,7 +109,7 @@ static void next_lookup(struct addr_query *aquery)
       switch (*p)
         {
         case 'b':
-	  if (aquery->family == AF_INET)
+          if (aquery->family == AF_INET)
             {
               addr = ntohl(aquery->addr.addr4.s_addr);
               a1 = (int)((addr >> 24) & 0xff);

ares/ares_gethostbyname.c

@@ -124,10 +124,10 @@ static void next_lookup(struct host_query *hquery)
         case 'b':
           /* DNS lookup */
           hquery->remaining_lookups = p + 1;
-	  if (hquery->family == AF_INET6)
-	    ares_search(hquery->channel, hquery->name, C_IN, T_AAAA, host_callback,
-	                hquery);
-	  else
+          if (hquery->family == AF_INET6)
+            ares_search(hquery->channel, hquery->name, C_IN, T_AAAA, host_callback,
+                        hquery);
+          else
             ares_search(hquery->channel, hquery->name, C_IN, T_A, host_callback,
                         hquery);
           return;
@@ -174,7 +174,7 @@ static void host_callback(void *arg, int status, unsigned char *abuf, int alen)
       hquery->family = AF_INET;
       ares_search(hquery->channel, hquery->name, C_IN, T_A, host_callback,
                   hquery);
-    }      
+    }
   else if (status == ARES_EDESTRUCTION)
     end_hquery(hquery, status, NULL);
   else
@@ -342,13 +342,13 @@ static int get_address_index(struct in_addr *addr, struct apattern *sortlist,
         continue;
       if (sortlist[i].type == PATTERN_MASK)
         {
-          if ((addr->s_addr & sortlist[i].mask.addr.addr4.s_addr) 
+          if ((addr->s_addr & sortlist[i].mask.addr.addr4.s_addr)
               == sortlist[i].addr.addr4.s_addr)
             break;
         }
       else
         {
-          if (!ares_bitncmp(&addr->s_addr, &sortlist[i].addr.addr4.s_addr, 
+          if (!ares_bitncmp(&addr->s_addr, &sortlist[i].addr.addr4.s_addr,
                             sortlist[i].mask.bits))
             break;
         }

ares/ares_getnameinfo.3

@@ -0,0 +1,145 @@
+.\" $Id$
+.\"
+.\" Copyright 2005 by Dominick Meglio.
+.\"
+.\" Permission to use, copy, modify, and distribute this
+.\" software and its documentation for any purpose and without
+.\" fee is hereby granted, provided that the above copyright
+.\" notice appear in all copies and that both that copyright
+.\" notice and this permission notice appear in supporting
+.\" documentation, and that the name of M.I.T. not be used in
+.\" advertising or publicity pertaining to distribution of the
+.\" software without specific, written prior permission.
+.\" M.I.T. makes no representations about the suitability of
+.\" this software for any purpose.  It is provided "as is"
+.\" without express or implied warranty.
+.\"
+.TH ARES_GETNAMEINFO 3 "16 May 2005"
+.SH NAME
+ares_getnameinfo \- Address-to-nodename translation in protocol-independent manner
+.SH SYNOPSIS
+.nf
+.B #include <ares.h>
+.PP
+.B typedef void (*ares_nameinfo_callback)(void *\fIarg\fP, int \fIstatus\fP,
+.B	char *\fInode\fP, char *\fIservice\fP)
+.PP
+.B void ares_getnameinfo(ares_channel \fIchannel\fP, const struct sockaddr *\fIsa\fP,
+.B 	socklen_t \fIsalen\fP, int \fIflags\fP, ares_nameinfo_callback \fIcallback\fP,
+.B 	void *\fIarg\fP)
+.fi
+.SH DESCRIPTION
+The
+.B ares_getnameinfo
+function is defined for protocol-independent address translation. The function
+is a combination of \fIares_gethostbyaddr(3)\fP and \fIgetservbyport(3)\fP. The function will
+translate the address either by executing a host query on the name service channel
+identified by
+.IR channel 
+or it will attempt to resolve it locally if possible.
+The parameters
+.I sa
+and
+.I len
+give the address as a sockaddr structure, and
+.I flags
+gives the options that the function will use.  Valid flags are listed below:
+.TP 19
+.B ARES_NI_NOFQDN
+Only the nodename portion of the FQDN is returned for local hosts.
+.TP 19
+.B ARES_NI_NUMERICHOST
+The numeric form of the hostname is returned rather than the name.
+.TP 19
+.B ARES_NI_NAMEREQD
+An error is returned if the hostname cannot be found in the DNS.
+.TP 19
+.B ARES_NI_NUMERICSERV
+The numeric form of the service is returned rather than the name.
+.TP 19
+.B ARES_NI_TCP
+The service name is to be looked up for the TCP protocol.
+.TP 19
+.B ARES_NI_UDP
+The service name is to be looked up for the UDP protocol.
+.TP 19
+.B ARES_NI_SCTP
+The service name is to be looked up for the SCTP protocol.
+.TP 19
+.B ARES_NI_DCCP
+The service name is to be looked up for the DCCP protocol.
+.TP 19
+.B ARES_NI_NUMERICSCOPE
+The numeric form of the scope ID is returned rather than the name.
+.TP 19
+.B ARES_NI_LOOKUPHOST
+A hostname lookup is being requested.
+.TP 19
+.B ARES_NI_LOOKUPSERVICE
+A service name lookup is being requested.
+.PP
+When the query
+is complete or has 
+failed, the ares library will invoke \fIcallback\fP.  Completion or failure of 
+the query may happen immediately, or may happen during a later call to
+\fIares_process(3)\fP, \fIares_destroy(3)\fP or \fIares_cancel(3)\fP.
+.PP
+The callback argument
+.I arg
+is copied from the
+.B ares_getnameinfo
+argument
+.IR arg .
+The callback argument
+.I status
+indicates whether the query succeeded and, if not, how it failed.  It
+may have any of the following values:
+.TP 19
+.B ARES_SUCCESS
+The host lookup completed successfully.
+.TP 19
+.B ARES_ENOTIMP
+The ares library does not know how to look up addresses of type
+.IR family .
+.TP 19
+.B ARES_ENOTFOUND
+The address
+.I addr
+was not found.
+.TP 19
+.B ARES_ENOMEM
+Memory was exhausted.
+.TP 19
+.B ARES_EDESTRUCTION
+The name service channel
+.I channel
+is being destroyed; the query will not be completed.
+.TP 19
+.B ARES_EBADFLAGS
+The
+.I flags
+parameter contains an illegal value.
+.PP
+On successful completion of the query, the callback argument
+.I node
+contains a string representing the hostname (assuming 
+.B ARES_NI_LOOKUPHOST
+was specified). Additionally, 
+.I service
+contains a string representing the service name (assuming
+.B ARES_NI_LOOKUPSERVICE
+was specified).
+If the query did not complete successfully, or one of the values
+was not requested, 
+.I node
+or
+.I service
+will be 
+.BR NULL .
+.SH SEE ALSO
+.BR ares_process (3),
+.BR ares_getaddrinfo (3)
+.SH AUTHOR
+Dominick Meglio
+.br
+Copyright 2005 by Dominick Meglio.

ares/ares_getnameinfo.c

@@ -0,0 +1,388 @@
+/* $Id$ */
+
+/* Copyright 2005 by Dominick Meglio
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+#include "setup.h"
+#include <sys/types.h>
+#include <ctype.h>
+
+#if defined(WIN32) && !defined(WATT32)
+#include "nameser.h"
+#else
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <netdb.h>
+#include <arpa/inet.h>
+#include <arpa/nameser.h>
+#ifdef HAVE_ARPA_NAMESER_COMPAT_H
+#include <arpa/nameser_compat.h>
+#endif
+#endif
+
+#ifdef HAVE_NET_IF_H
+#include <net/if.h>
+#endif
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "ares.h"
+#include "ares_private.h"
+#include "ares_ipv6.h"
+#include "inet_ntop.h"
+
+#ifdef WATT32
+#undef WIN32
+#endif
+
+struct nameinfo_query {
+  ares_nameinfo_callback callback;
+  void *arg;
+  union {
+    struct sockaddr_in addr4;
+    struct sockaddr_in6 addr6;
+  } addr;
+  int family;
+  int flags;
+};
+
+#ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID
+#define IPBUFSIZ 40+IF_NAMESIZE
+#else
+#define IPBUFSIZ 40
+#endif
+
+static void nameinfo_callback(void *arg, int status, struct hostent *host);
+static char *lookup_service(unsigned short port, int flags, char *buf);
+#ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID
+static void append_scopeid(struct sockaddr_in6 *addr6, unsigned int scopeid,
+                           char *buf, size_t buflen);
+#endif
+static char *ares_striendstr(const char *s1, const char *s2);
+
+void ares_getnameinfo(ares_channel channel, const struct sockaddr *sa, socklen_t salen,
+                      int flags, ares_nameinfo_callback callback, void *arg)
+{
+  struct sockaddr_in *addr = NULL;
+  struct sockaddr_in6 *addr6 = NULL;
+  struct nameinfo_query *niquery;
+
+  /* Verify the buffer size */
+  if (salen == sizeof(struct sockaddr_in))
+    addr = (struct sockaddr_in *)sa;
+  else if (salen == sizeof(struct sockaddr_in6))
+    addr6 = (struct sockaddr_in6 *)sa;
+  else
+    {
+      callback(arg, ARES_ENOTIMP, NULL, NULL);
+      return;
+    }
+
+  /* If neither, assume they want a host */
+  if (!(flags & ARES_NI_LOOKUPSERVICE) && !(flags & ARES_NI_LOOKUPHOST))
+    flags |= ARES_NI_LOOKUPHOST;
+
+  /* All they want is a service, no need for DNS */
+  if ((flags & ARES_NI_LOOKUPSERVICE) && !(flags & ARES_NI_LOOKUPHOST))
+    {
+      char buf[33], *service;
+      unsigned int port = 0;
+
+      if (salen == sizeof(struct sockaddr_in))
+        port = addr->sin_port;
+      else
+        port = addr6->sin6_port;
+      service = lookup_service(port, flags, buf);
+      callback(arg, ARES_SUCCESS, NULL, service);
+      return;
+    }
+
+  /* They want a host lookup */
+  if ((flags & ARES_NI_LOOKUPHOST))
+    {
+     /* A numeric host can be handled without DNS */
+     if ((flags & ARES_NI_NUMERICHOST))
+      {
+        unsigned int port = 0;
+        char ipbuf[IPBUFSIZ];
+        char srvbuf[32];
+        char *service = NULL;
+        ipbuf[0] = 0;
+
+        /* Specifying not to lookup a host, but then saying a host
+         * is required has to be illegal.
+         */
+        if (flags & ARES_NI_NAMEREQD)
+          {
+            callback(arg, ARES_EBADFLAGS, NULL, NULL);
+            return;
+          }
+        if (salen == sizeof(struct sockaddr_in6))
+          {
+            ares_inet_ntop(AF_INET6, &addr6->sin6_addr, ipbuf, IPBUFSIZ);
+            port = addr6->sin6_port;
+            /* If the system supports scope IDs, use it */
+#ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID
+            append_scopeid(addr6, flags, ipbuf, sizeof(ipbuf));
+#endif
+          }
+        else
+          {
+            ares_inet_ntop(AF_INET, &addr->sin_addr, ipbuf, IPBUFSIZ);
+            port = addr->sin_port;
+          }
+        /* They also want a service */
+        if (flags & ARES_NI_LOOKUPSERVICE)
+          service = lookup_service(port, flags, srvbuf);
+        callback(arg, ARES_SUCCESS, ipbuf, service);
+        return;
+      }
+    /* This is where a DNS lookup becomes necessary */
+    else
+      {
+        niquery = malloc(sizeof(struct nameinfo_query));
+        if (!niquery)
+          {
+            callback(arg, ARES_ENOMEM, NULL, NULL);
+            return;
+          }
+        niquery->callback = callback;
+        niquery->arg = arg;
+        niquery->flags = flags;
+        if (sa->sa_family == AF_INET)
+          {
+            niquery->family = AF_INET;
+            memcpy(&niquery->addr.addr4, addr, sizeof(addr));
+            ares_gethostbyaddr(channel, &addr->sin_addr, sizeof(struct in_addr), AF_INET,
+                               nameinfo_callback, niquery);
+          }
+        else
+          {
+            niquery->family = AF_INET6;
+            memcpy(&niquery->addr.addr6, addr6, sizeof(addr6));
+            ares_gethostbyaddr(channel, &addr6->sin6_addr, sizeof(struct in6_addr), AF_INET6,
+                               nameinfo_callback, niquery);
+          }
+      }
+    }
+}
+
+static void nameinfo_callback(void *arg, int status, struct hostent *host)
+{
+  struct nameinfo_query *niquery = (struct nameinfo_query *) arg;
+  char srvbuf[33];
+  char *service = NULL;
+
+
+  if (status == ARES_SUCCESS)
+    {
+      /* They want a service too */
+      if (niquery->flags & ARES_NI_LOOKUPSERVICE)
+        {
+          if (niquery->family == AF_INET)
+            service = lookup_service(niquery->addr.addr4.sin_port,
+                                     niquery->flags, srvbuf);
+          else
+            service = lookup_service(niquery->addr.addr6.sin6_port,
+                                     niquery->flags, srvbuf);
+        }
+      /* NOFQDN means we have to strip off the domain name portion.
+         We do this by determining our own domain name, then searching the string
+         for this domain name and removing it.
+       */
+      if (niquery->flags & ARES_NI_NOFQDN)
+        {
+           char buf[255];
+           char *domain;
+           gethostname(buf, 255);
+           if ((domain = strchr(buf, '.')))
+             {
+               char *end = ares_striendstr(host->h_name, domain);
+               if (end)
+                 *end = 0;
+             }
+        }
+      niquery->callback(niquery->arg, ARES_SUCCESS, host->h_name, service);
+      return;
+    }
+  /* We couldn't find the host, but it's OK, we can use the IP */
+  else if (status == ARES_ENOTFOUND && !(niquery->flags & ARES_NI_NAMEREQD))
+    {
+      char ipbuf[IPBUFSIZ];
+      if (niquery->family == AF_INET)
+        ares_inet_ntop(AF_INET, &niquery->addr.addr4.sin_addr, ipbuf, IPBUFSIZ);
+      else
+        {
+          ares_inet_ntop(AF_INET6, &niquery->addr.addr6.sin6_addr, ipbuf, IPBUFSIZ);
+#ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID
+          append_scopeid(&niquery->addr.addr6, niquery->flags, ipbuf, sizeof(ipbuf));
+#endif
+        }
+      /* They want a service too */
+      if (niquery->flags & ARES_NI_LOOKUPSERVICE)
+        {
+          if (niquery->family == AF_INET)
+            service = lookup_service(niquery->addr.addr4.sin_port,
+                                     niquery->flags, srvbuf);
+          else
+            service = lookup_service(niquery->addr.addr6.sin6_port,
+                                     niquery->flags, srvbuf);
+        }
+      niquery->callback(niquery->arg, ARES_SUCCESS, ipbuf, service);
+      return;
+    }
+  niquery->callback(niquery->arg, status, NULL, NULL);
+  free(niquery);
+}
+
+static char *lookup_service(unsigned short port, int flags,
+                            char *buf) /* 33 bytes buffer */
+{
+  if (port)
+    {
+      /* Just return the port as a string */
+      if (flags & ARES_NI_NUMERICSERV)
+        sprintf(buf, "%u", ntohs(port));
+      else
+        {
+          struct servent *se;
+          const char *proto;
+#ifdef HAVE_GETSERVBYPORT_R
+#if GETSERVBYPORT_R_ARGS == 6
+          struct servent ret;
+          char buf[4096];
+          int len = 4096;
+#elif GETSERVBYPORT_R_ARGS == 5
+          char buf[4096];
+          int len = 4096;
+#elif GETSERVBYPORT_R_ARGS == 4
+          struct servent ret;
+          struct servent_data sed;
+#endif
+#endif /* HAVE_GETSERVBYPORT_R */
+          if (flags & ARES_NI_UDP)
+            proto = "udp";
+          else if (flags & ARES_NI_SCTP)
+            proto = "sctp";
+          else if (flags & ARES_NI_DCCP)
+            proto = "dccp";
+          else
+            proto = "tcp";
+#ifdef HAVE_GETSERVBYPORT_R
+#if GETSERVBYPORT_R_ARGS == 6
+          se = &ret;
+          if (getservbyport_r(port, proto, se, buf, len, &ret))
+            se = NULL;
+#elif GETSERVBYPORT_R_ARGS == 5
+          se = getservbyport_r(port, proto, se, buf, len);
+#elif GETSERVBYPORT_R_ARGS == 4
+          se = &ret;
+          if (getservbyport_r(port, proto, se, &sed) == -1)
+            se = NULL;
+#else
+          /* Lets just hope the OS uses TLS! */
+          se = getservbyport(port, proto);
+#endif
+#else
+          /* Lets just hope the OS uses TLS! */
+          se = getservbyport(port, proto);
+#endif
+          if (se && se->s_name) {
+            size_t len = strlen(se->s_name);
+            if(len < 33) {
+              strcpy(buf, se->s_name);
+            }
+            else
+              /* too big name to fit the buffer */
+              buf[0]=0;
+          }
+          else
+            sprintf(buf, "%u", ntohs(port));
+        }
+      return buf;
+    }
+  return NULL;
+}
+
+#ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID
+static void append_scopeid(struct sockaddr_in6 *addr6, unsigned int flags,
+                           char *buf, size_t buflen)
+{
+  char fmt_u[] = "%u";
+  char fmt_lu[] = "%lu";
+  char tmpbuf[IF_NAMESIZE + 2];
+  size_t bufl;
+  char *fmt = (sizeof(addr6->sin6_scope_id) > sizeof(unsigned int))?fmt_lu:fmt_u;
+
+  tmpbuf[0] = '%';
+
+#ifdef HAVE_IF_INDEXTONAME
+  if ((flags & ARES_NI_NUMERICSCOPE) ||
+      (!IN6_IS_ADDR_LINKLOCAL(&addr6->sin6_addr)
+       && !IN6_IS_ADDR_MC_LINKLOCAL(&addr6->sin6_addr)))
+    {
+       sprintf(&tmpbuf[1], fmt, addr6->sin6_scope_id);
+    }
+  else
+    {
+      if (if_indextoname(addr6->sin6_scope_id, &tmpbuf[1]) == NULL)
+        sprintf(&tmpbuf[1], fmt, addr6->sin6_scope_id);
+    }
+#else
+  sprintf(&tmpbuf[1], fmt, addr6->sin6_scope_id);
+  (void) flags;
+#endif
+  tmpbuf[IF_NAMESIZE + 1] = '\0';
+  bufl = strlen(buf);
+
+  if(bufl + strlen(tmpbuf) < buflen)
+    /* only append the scopeid string if it fits in the target buffer */
+    strcpy(&buf[bufl], tmpbuf);
+}
+#endif
+
+/* Determines if s1 ends with the string in s2 (case-insensitive) */
+static char *ares_striendstr(const char *s1, const char *s2)
+{
+  const char *c1, *c2, *c1_begin;
+  size_t s1_len = strlen(s1), s2_len = strlen(s2);
+
+  /* If the substr is longer than the full str, it can't match */
+  if (s2_len > s1_len)
+    return NULL;
+
+  /* Jump to the end of s1 minus the length of s2 */
+  c1_begin = s1+s1_len-s2_len;
+  c1 = (const char *)c1_begin;
+  c2 = s2;
+  while (c2 < s2+s2_len)
+    {
+      if (tolower(*c1) != tolower(*c2))
+        return NULL;
+      else
+        {
+          c1++;
+          c2++;
+        }
+    }
+  if (c2 == c1 && c2 == NULL)
+    return (char *)c1_begin;
+  return NULL;
+}

ares/ares_init.c

@@ -327,6 +327,7 @@ static int get_iphlpapi_dns_info (char *ret_buf, size_t ret_size)
   size_t         ip_size = sizeof("255.255.255.255,")-1;
   size_t         left = ret_size;
   char          *ret = ret_buf;
+  HRESULT        res;
 
   if (!fi)
      return (0);
@@ -339,7 +340,8 @@ static int get_iphlpapi_dns_info (char *ret_buf, size_t ret_size)
   if (!GetNetworkParams)
      goto quit;
 
-  if ((*GetNetworkParams) (fi, &size) != ERROR_BUFFER_OVERFLOW)
+  res = (*GetNetworkParams) (fi, &size);
+  if ((res != ERROR_BUFFER_OVERFLOW) && (res != ERROR_SUCCESS))
      goto quit;
 
   fi = alloca (size);
@@ -843,7 +845,7 @@ static int config_sortlist(struct apattern **sortlist, int *nsort,
       while (*q && *q != '/' && *q != ';' && !isspace((unsigned char)*q))
         q++;
       memcpy(ipbuf, str, (int)(q-str));
-      ipbuf[(int)(q-str)] = 0;      
+      ipbuf[(int)(q-str)] = 0;
       /* Find the prefix */
       if (*q == '/')
         {
@@ -858,7 +860,8 @@ static int config_sortlist(struct apattern **sortlist, int *nsort,
         ipbufpfx[0] = 0;
       /* Lets see if it is CIDR */
       /* First we'll try IPv6 */
-      if ((bits = ares_inet_net_pton(AF_INET6, ipbufpfx ? ipbufpfx : ipbuf, &pat.addr.addr6, 
+      if ((bits = ares_inet_net_pton(AF_INET6, ipbufpfx ? ipbufpfx : ipbuf,
+                                     &pat.addr.addr6,
                                      sizeof(pat.addr.addr6))) > 0)
         {
           pat.type = PATTERN_CIDR;
@@ -867,8 +870,8 @@ static int config_sortlist(struct apattern **sortlist, int *nsort,
           if (!sortlist_alloc(sortlist, nsort, &pat))
             return ARES_ENOMEM;
         }
-      if (ipbufpfx && 
-          (bits = ares_inet_net_pton(AF_INET, ipbufpfx, &pat.addr.addr4, 
+      if (ipbufpfx &&
+          (bits = ares_inet_net_pton(AF_INET, ipbufpfx, &pat.addr.addr4,
                                      sizeof(pat.addr.addr4))) > 0)
         {
           pat.type = PATTERN_CIDR;
@@ -890,7 +893,7 @@ static int config_sortlist(struct apattern **sortlist, int *nsort,
           else
             natural_mask(&pat);
           pat.family = AF_INET;
-	  pat.type = PATTERN_MASK;
+          pat.type = PATTERN_MASK;
           if (!sortlist_alloc(sortlist, nsort, &pat))
             return ARES_ENOMEM;
         }
@@ -1011,7 +1014,8 @@ static const char *try_option(const char *p, const char *q, const char *opt)
 }
 
 #ifndef WIN32
-static int sortlist_alloc(struct apattern **sortlist, int *nsort, struct apattern *pat)
+static int sortlist_alloc(struct apattern **sortlist, int *nsort,
+                          struct apattern *pat)
 {
   struct apattern *newsort;
   newsort = realloc(*sortlist, (*nsort + 1) * sizeof(struct apattern));

ares/ares_ipv6.h

@@ -28,6 +28,31 @@ struct in6_addr
 };
 #endif
 
+#ifndef HAVE_STRUCT_SOCKADDR_IN6
+struct sockaddr_in6
+{
+  unsigned short  sin6_family;
+  unsigned short  sin6_port;
+  unsigned long   sin6_flowinfo;
+  struct in6_addr sin6_addr;
+  unsigned int    sin6_scope_id;
+};
+#endif
+
+#ifndef HAVE_STRUCT_ADDRINFO
+struct addrinfo
+{
+  int ai_flags;
+  int ai_family;
+  int ai_socktype;
+  int ai_protocol;
+  size_t ai_addrlen;
+  char *ai_cannonname;
+  struct sockaddr *ai_addr;
+  struct addrinfo *ai_next;
+};
+#endif
+
 #ifndef NS_IN6ADDRSZ
 #if SIZEOF_STRUCT_IN6_ADDR == 0
 /* We cannot have it set to zero, so we pick a fixed value here */
@@ -45,4 +70,12 @@ struct in6_addr
 #define NS_INT16SZ 2
 #endif
 
+#ifndef IF_NAMESIZE
+#ifdef IFNAMSIZ
+#define IF_NAMESIZE IFNAMSIZ
+#else
+#define IF_NAMESIZE 256
+#endif
+#endif
+
 #endif /* ARES_IPV6_H */

ares/ares_private.h

@@ -33,6 +33,10 @@
 #define writev(s,v,c)     writev_s(s,v,c)
 #endif
 
+#ifdef NETWARE
+#include <time.h>
+#endif
+
 #define DEFAULT_TIMEOUT         5
 #define DEFAULT_TRIES           4
 #ifndef INADDR_NONE

ares/ares_process.c

@@ -33,6 +33,12 @@
 #ifdef HAVE_UNISTD_H
 #include <unistd.h>
 #endif
+#ifdef HAVE_SYS_IOCTL_H
+#include <sys/ioctl.h>
+#endif
+#ifdef NETWARE
+#include <sys/filio.h>
+#endif
 #endif
 
 #include <string.h>
@@ -45,6 +51,11 @@
 #include "ares_dns.h"
 #include "ares_private.h"
 
+#ifndef TRUE
+/* at least Solaris 7 does not have TRUE at this point */
+#define TRUE 1
+#endif
+
 #if (defined(WIN32) || defined(WATT32)) && !defined(MSDOS)
 #define GET_ERRNO()  WSAGetLastError()
 #else
@@ -153,7 +164,8 @@ static void write_tcp_data(ares_channel channel, fd_set *write_fds, time_t now)
           /* Can't allocate iovecs; just send the first request. */
           sendreq = server->qhead;
 
-          scount = send(server->tcp_socket, sendreq->data, sendreq->len, 0);
+          scount = send(server->tcp_socket, (void *)sendreq->data,
+                        sendreq->len, 0);
 
           if (scount < 0)
             {
@@ -201,8 +213,8 @@ static void read_tcp_data(ares_channel channel, fd_set *read_fds, time_t now)
            * what's left to read of it).
            */
           count = recv(server->tcp_socket,
-                       server->tcp_lenbuf + server->tcp_buffer_pos,
-                       2 - server->tcp_buffer_pos, 0);
+                       (void *)(server->tcp_lenbuf + server->tcp_lenbuf_pos),
+                       2 - server->tcp_lenbuf_pos, 0);
           if (count <= 0)
             {
               handle_error(channel, i, now);
@@ -227,7 +239,7 @@ static void read_tcp_data(ares_channel channel, fd_set *read_fds, time_t now)
         {
           /* Read data into the allocated buffer. */
           count = recv(server->tcp_socket,
-                       server->tcp_buffer + server->tcp_buffer_pos,
+                       (void *)(server->tcp_buffer + server->tcp_buffer_pos),
                        server->tcp_length - server->tcp_buffer_pos, 0);
           if (count <= 0)
             {
@@ -269,7 +281,7 @@ static void read_udp_packets(ares_channel channel, fd_set *read_fds,
           !FD_ISSET(server->udp_socket, read_fds))
         continue;
 
-      count = recv(server->udp_socket, buf, sizeof(buf), 0);
+      count = recv(server->udp_socket, (void *)buf, sizeof(buf), 0);
       if (count <= 0)
         handle_error(channel, i, now);
 
@@ -454,7 +466,8 @@ void ares__send_query(ares_channel channel, struct query *query, time_t now)
               return;
             }
         }
-      if (send(server->udp_socket, query->qbuf, query->qlen, 0) == -1)
+      if (send(server->udp_socket, (void *)query->qbuf,
+               query->qlen, 0) == -1)
         {
           query->skip_server[query->server] = 1;
           next_server(channel, query, now);
@@ -466,13 +479,76 @@ void ares__send_query(ares_channel channel, struct query *query, time_t now)
     }
 }
 
+/*
+ * nonblock() set the given socket to either blocking or non-blocking mode
+ * based on the 'nonblock' boolean argument. This function is highly portable.
+ */
+static int nonblock(ares_socket_t sockfd,    /* operate on this */
+                    int nonblock   /* TRUE or FALSE */)
+{
+#undef SETBLOCK
+#define SETBLOCK 0
+#ifdef HAVE_O_NONBLOCK
+  /* most recent unix versions */
+  int flags;
+
+  flags = fcntl(sockfd, F_GETFL, 0);
+  if (TRUE == nonblock)
+    return fcntl(sockfd, F_SETFL, flags | O_NONBLOCK);
+  else
+    return fcntl(sockfd, F_SETFL, flags & (~O_NONBLOCK));
+#undef SETBLOCK
+#define SETBLOCK 1
+#endif
+
+#if defined(HAVE_FIONBIO) && (SETBLOCK == 0)
+  /* older unix versions */
+  int flags;
+
+  flags = nonblock;
+  return ioctl(sockfd, FIONBIO, &flags);
+#undef SETBLOCK
+#define SETBLOCK 2
+#endif
+
+#if defined(HAVE_IOCTLSOCKET) && (SETBLOCK == 0)
+  /* Windows? */
+  unsigned long flags;
+  flags = nonblock;
+
+  return ioctlsocket(sockfd, FIONBIO, &flags);
+#undef SETBLOCK
+#define SETBLOCK 3
+#endif
+
+#if defined(HAVE_IOCTLSOCKET_CASE) && (SETBLOCK == 0)
+  /* presumably for Amiga */
+  return IoctlSocket(sockfd, FIONBIO, (long)nonblock);
+#undef SETBLOCK
+#define SETBLOCK 4
+#endif
+
+#if defined(HAVE_SO_NONBLOCK) && (SETBLOCK == 0)
+  /* BeOS */
+  long b = nonblock ? 1 : 0;
+  return setsockopt(sockfd, SOL_SOCKET, SO_NONBLOCK, &b, sizeof(b));
+#undef SETBLOCK
+#define SETBLOCK 5
+#endif
+
+#ifdef HAVE_DISABLED_NONBLOCKING
+  return 0; /* returns success */
+#undef SETBLOCK
+#define SETBLOCK 6
+#endif
+
+#if (SETBLOCK == 0)
+#error "no non-blocking method was found/used/set"
+#endif
+}
+
 static int open_tcp_socket(ares_channel channel, struct server_state *server)
 {
-#if defined(WIN32)
-  u_long flags;
-#else
-  int flags;
-#endif
   ares_socket_t s;
   struct sockaddr_in sockin;
 
@@ -482,25 +558,7 @@ static int open_tcp_socket(ares_channel channel, struct server_state *server)
     return -1;
 
   /* Set the socket non-blocking. */
-
-#if defined(WIN32) || defined(WATT32)
-  flags = 1;
-  ioctlsocket(s, FIONBIO, &flags);
-#else
-  flags = fcntl(s, F_GETFL, 0);
-
-  if (flags == -1)
-    {
-      closesocket(s);
-      return -1;
-    }
-  flags |= O_NONBLOCK;
-  if (fcntl(s, F_SETFL, flags) == -1)
-    {
-      closesocket(s);
-      return -1;
-    }
-#endif
+  nonblock(s, TRUE);
 
   /* Connect to the server. */
   memset(&sockin, 0, sizeof(sockin));
@@ -531,6 +589,9 @@ static int open_udp_socket(ares_channel channel, struct server_state *server)
   if (s == ARES_SOCKET_BAD)
     return -1;
 
+  /* Set the socket non-blocking. */
+  nonblock(s, TRUE);
+
   /* Connect to the server. */
   memset(&sockin, 0, sizeof(sockin));
   sockin.sin_family = AF_INET;

ares/ares_strerror.c

@@ -38,7 +38,8 @@ const char *ares_strerror(int code)
     "Error reading file",
     "Out of memory",
     "Channel is being destroyed",
-    "Misformatted string"
+    "Misformatted string",
+    "Illegal flags specified"
   };
 
   assert(code >= 0 && code < (int)(sizeof(errtext) / sizeof(*errtext)));

ares/config-win32.h

@@ -0,0 +1,35 @@
+/* $Id$ */
+
+/* Copyright (C) 2004 - 2005 by Daniel Stenberg et al
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation for any purpose and without fee is hereby granted, provided
+ * that the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  M.I.T. makes no representations about the
+ * suitability of this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#ifndef __CONFIG_WIN32_H
+#define __CONFIG_WIN32_H
+
+#if defined(__MINGW32__)
+#define HAVE_GETOPT_H
+#endif
+
+#if defined(__MINGW32__) || defined(__WATCOMC__)
+#define HAVE_UNISTD_H
+#endif
+
+#define HAVE_AF_INET6
+#define HAVE_PF_INET6
+#define HAVE_IOCTLSOCKET
+#define HAVE_STRUCT_IN6_ADDR
+#define HAVE_STRUCT_SOCKADDR_IN6
+#define HAVE_STRUCT_ADDRINFO
+#define HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID
+
+#endif  /* __CONFIG_WIN32_H */

ares/configure.ac

@@ -65,8 +65,12 @@ AC_CHECK_HEADERS(
        sys/time.h \
        sys/select.h \
        sys/socket.h \
-       winsock.h \
+       sys/ioctl.h \
+       netdb.h \
+       winsock2.h \
+       ws2tcpip.h \
        netinet/in.h \
+       net/if.h \
        arpa/nameser.h \
        arpa/nameser_compat.h \
        arpa/inet.h, , ,
@@ -80,9 +84,31 @@ dnl (and others?) is not designed to allow this.
 #ifdef HAVE_ARPA_NAMESER_H
 #include <arpa/nameser.h>
 #endif
+
+dnl *Sigh* these are needed in order for net/if.h to get properly detected.
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+#ifdef HAVE_WINSOCK2_H
+#include <winsock2.h>
+#endif
 ]
   )
 
+AC_CHECK_TYPE(socklen_t, ,
+   AC_DEFINE(socklen_t, int, [the length of a socket address]), 
+   [
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+#ifdef HAVE_WINSOCK2_H
+#include <winsock2.h>
+#endif
+   ])
+
 dnl check for AF_INET6
 CARES_CHECK_CONSTANT(
   [
@@ -92,8 +118,8 @@ CARES_CHECK_CONSTANT(
 #ifdef HAVE_SYS_SOCKET_H
 #include <sys/socket.h>
 #endif
-#ifdef HAVE_WINSOCK_H
-#include <winsock.h>
+#ifdef HAVE_WINSOCK2_H
+#include <winsock2.h>
 #endif
 
   ], [PF_INET6], 
@@ -109,8 +135,8 @@ CARES_CHECK_CONSTANT(
 #ifdef HAVE_SYS_SOCKET_H
 #include <sys/socket.h>
 #endif
-#ifdef HAVE_WINSOCK_H
-#include <winsock.h>
+#ifdef HAVE_WINSOCK2_H
+#include <winsock2.h>
 #endif
 
   ], [AF_INET6], 
@@ -124,8 +150,11 @@ CARES_CHECK_STRUCT(
 #ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>
 #endif
-#ifdef HAVE_WINSOCK_H
-#include <winsock.h>
+#ifdef HAVE_WINSOCK2_H
+#include <winsock2.h>
+#endif
+#ifdef HAVE_WS2TCPIP_H
+#include <ws2tcpip.h>
 #endif
 #ifdef HAVE_NETINET_IN_H
 #include <netinet/in.h>
@@ -134,6 +163,71 @@ CARES_CHECK_STRUCT(
      AC_DEFINE_UNQUOTED(HAVE_STRUCT_IN6_ADDR,1,[Define to 1 if you have struct in6_addr.])
 )
 
+dnl check for the sockaddr_in6 structure
+CARES_CHECK_STRUCT(
+  [
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_WINSOCK2_H
+#include <winsock2.h>
+#endif
+#ifdef HAVE_WS2TCPIP_H
+#include <ws2tcpip.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#include <netinet/in.h>
+#endif
+  ], [sockaddr_in6], 
+     AC_DEFINE_UNQUOTED(HAVE_STRUCT_SOCKADDR_IN6,1,
+       [Define to 1 if you have struct sockaddr_in6.]) ac_have_sockaddr_in6=yes
+)
+
+AC_CHECK_MEMBER(struct sockaddr_in6.sin6_scope_id,
+    AC_DEFINE_UNQUOTED(HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID,1,
+      [Define to 1 if your struct sockaddr_in6 has sin6_scope_id.])
+   , ,
+  [
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_WINSOCK2_H
+#include <winsock2.h>
+#endif
+#ifdef HAVE_WS2TCPIP_H
+#include <ws2tcpip.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#include <netinet/in.h>
+#endif
+  ])
+
+dnl check for the addrinfo structure
+AC_CHECK_MEMBER(struct addrinfo.ai_flags,
+     AC_DEFINE_UNQUOTED(HAVE_STRUCT_ADDRINFO,1,
+       [Define to 1 if you have struct addrinfo.]),,
+  [
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_WINSOCaK2_H
+#include <winsock2.h>
+#endif
+#ifdef HAVE_WS2TCPIP_H
+#include <ws2tcpip.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#include <netinet/in.h>
+#endif
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+#ifdef HAVE_NETDB_H
+#include <netdb.h>
+#endif
+  ]
+)
+
 dnl check for inet_pton
 AC_CHECK_FUNCS(inet_pton)
 dnl Some systems have it, but not IPv6
@@ -268,7 +362,17 @@ AC_CHECK_SIZEOF(struct in_addr, ,
 ]
 )
 
-AC_CHECK_FUNCS(bitncmp)
+AC_CHECK_FUNCS([bitncmp if_indextoname])
 
+dnl God bless non-standardized functions! We need to see which getservbyport_r variant is available
+CARES_CHECK_GETSERVBYPORT_R
+
+CURL_CHECK_NONBLOCKING_SOCKET
+
+AC_C_BIGENDIAN(
+    [AC_DEFINE(ARES_BIG_ENDIAN, 1, [define this if ares is built for a big endian system])],
+    ,
+    [AC_MSG_WARN([couldn't figure out endianess, assuming little endian!])]
+)
 
 AC_OUTPUT(Makefile)

ares/inet_ntop.c

@@ -1,3 +1,5 @@
+/* $Id$ */
+
 /* Copyright (c) 1996 by Internet Software Consortium.
  *
  * Permission to use, copy, modify, and distribute this software for any
@@ -63,144 +65,156 @@ static const char *inet_ntop6(const unsigned char *src, char *dst, size_t size);
 
 /* char *
  * inet_ntop(af, src, dst, size)
- *	convert a network format address to presentation format.
+ *     convert a network format address to presentation format.
  * return:
- *	pointer to presentation format address (`dst'), or NULL (see errno).
+ *     pointer to presentation format address (`dst'), or NULL (see errno).
  * author:
- *	Paul Vixie, 1996.
+ *     Paul Vixie, 1996.
  */
 const char *
 ares_inet_ntop(int af, const void *src, char *dst, size_t size)
 {
-
-	switch (af) {
-	case AF_INET:
-		return (inet_ntop4(src, dst, size));
-	case AF_INET6:
-		return (inet_ntop6(src, dst, size));
-	default:
-		errno = EAFNOSUPPORT;
-		return (NULL);
-	}
-	/* NOTREACHED */
+  switch (af)
+    {
+    case AF_INET:
+      return (inet_ntop4(src, dst, size));
+    case AF_INET6:
+      return (inet_ntop6(src, dst, size));
+    default:
+      errno = EAFNOSUPPORT;
+      return (NULL);
+    }
+  /* NOTREACHED */
 }
 
 /* const char *
  * inet_ntop4(src, dst, size)
- *	format an IPv4 address, more or less like inet_ntoa()
+ *     format an IPv4 address, more or less like inet_ntoa()
  * return:
- *	`dst' (as a const)
+ *     `dst' (as a const)
  * notes:
- *	(1) uses no statics
- *	(2) takes a unsigned char* not an in_addr as input
+ *     (1) uses no statics
+ *     (2) takes a unsigned char* not an in_addr as input
  * author:
- *	Paul Vixie, 1996.
+ *     Paul Vixie, 1996.
  */
 static const char *
 inet_ntop4(const unsigned char *src, char *dst, size_t size)
 {
-	static const char fmt[] = "%u.%u.%u.%u";
-	char tmp[sizeof "255.255.255.255"];
+  static const char fmt[] = "%u.%u.%u.%u";
+  char tmp[sizeof "255.255.255.255"];
 
-	if (SPRINTF((tmp, fmt, src[0], src[1], src[2], src[3])) > size) {
-		errno = ENOSPC;
-		return (NULL);
-	}
-	strcpy(dst, tmp);
-	return (dst);
+  if (SPRINTF((tmp, fmt, src[0], src[1], src[2], src[3])) > size)
+    {
+      errno = ENOSPC;
+      return (NULL);
+    }
+    strcpy(dst, tmp);
+    return (dst);
 }
 
 /* const char *
  * inet_ntop6(src, dst, size)
- *	convert IPv6 binary address into presentation (printable) format
+ *    convert IPv6 binary address into presentation (printable) format
  * author:
- *	Paul Vixie, 1996.
+ *    Paul Vixie, 1996.
  */
 static const char *
 inet_ntop6(const unsigned char *src, char *dst, size_t size)
 {
-	/*
-	 * Note that int32_t and int16_t need only be "at least" large enough
-	 * to contain a value of the specified size.  On some systems, like
-	 * Crays, there is no such thing as an integer variable with 16 bits.
-	 * Keep this in mind if you think this function should have been coded
-	 * to use pointer overlays.  All the world's not a VAX.
-	 */
-	char tmp[sizeof "ffff:ffff:ffff:ffff:ffff:ffff:255.255.255.255"], *tp;
-	struct { int base, len; } best, cur;
-	unsigned int words[NS_IN6ADDRSZ / NS_INT16SZ];
-	int i;
+  /*
+   * Note that int32_t and int16_t need only be "at least" large enough
+   * to contain a value of the specified size.  On some systems, like
+   * Crays, there is no such thing as an integer variable with 16 bits.
+   * Keep this in mind if you think this function should have been coded
+   * to use pointer overlays.  All the world's not a VAX.
+   */
+  char tmp[sizeof "ffff:ffff:ffff:ffff:ffff:ffff:255.255.255.255"], *tp;
+  struct { int base, len; } best = { 0,0 }, cur = { 0,0 };
+  unsigned int words[NS_IN6ADDRSZ / NS_INT16SZ];
+  int i;
 
-	/*
-	 * Preprocess:
-	 *	Copy the input (bytewise) array into a wordwise array.
-	 *	Find the longest run of 0x00's in src[] for :: shorthanding.
-	 */
-	memset(words, '\0', sizeof words);
-	for (i = 0; i < NS_IN6ADDRSZ; i++)
-		words[i / 2] |= (src[i] << ((1 - (i % 2)) << 3));
-	best.base = -1;
-	cur.base = -1;
-	for (i = 0; i < (NS_IN6ADDRSZ / NS_INT16SZ); i++) {
-		if (words[i] == 0) {
-			if (cur.base == -1)
-				cur.base = i, cur.len = 1;
-			else
-				cur.len++;
-		} else {
-			if (cur.base != -1) {
-				if (best.base == -1 || cur.len > best.len)
-					best = cur;
-				cur.base = -1;
-			}
-		}
-	}
-	if (cur.base != -1) {
-		if (best.base == -1 || cur.len > best.len)
-			best = cur;
-	}
-	if (best.base != -1 && best.len < 2)
-		best.base = -1;
+  /*
+   * Preprocess:
+   *  Copy the input (bytewise) array into a wordwise array.
+   *  Find the longest run of 0x00's in src[] for :: shorthanding.
+   */
+  memset(words, '\0', sizeof words);
+  for (i = 0; i < NS_IN6ADDRSZ; i++)
+      words[i / 2] |= (src[i] << ((1 - (i % 2)) << 3));
+  best.base = -1;
+  cur.base = -1;
+  for (i = 0; i < (NS_IN6ADDRSZ / NS_INT16SZ); i++)
+    {
+      if (words[i] == 0)
+        {
+          if (cur.base == -1)
+            cur.base = i, cur.len = 1;
+          else
+            cur.len++;
+        }
+      else
+        {
+          if (cur.base != -1)
+            {
+              if (best.base == -1 || cur.len > best.len)
+                best = cur;
+              cur.base = -1;
+            }
+        }
+    }
+  if (cur.base != -1)
+    {
+      if (best.base == -1 || cur.len > best.len)
+        best = cur;
+    }
+  if (best.base != -1 && best.len < 2)
+    best.base = -1;
 
-	/*
-	 * Format the result.
-	 */
-	tp = tmp;
-	for (i = 0; i < (NS_IN6ADDRSZ / NS_INT16SZ); i++) {
-		/* Are we inside the best run of 0x00's? */
-		if (best.base != -1 && i >= best.base &&
-		    i < (best.base + best.len)) {
-			if (i == best.base)
-				*tp++ = ':';
-			continue;
-		}
-		/* Are we following an initial run of 0x00s or any real hex? */
-		if (i != 0)
-			*tp++ = ':';
-		/* Is this address an encapsulated IPv4? */
-		if (i == 6 && best.base == 0 &&
-		    (best.len == 6 || (best.len == 5 && words[5] == 0xffff))) {
-			if (!inet_ntop4(src+12, tp, sizeof tmp - (tp - tmp)))
-				return (NULL);
-			tp += strlen(tp);
-			break;
-		}
-		tp += SPRINTF((tp, "%x", words[i]));
-	}
-	/* Was it a trailing run of 0x00's? */
-	if (best.base != -1 && (best.base + best.len) == (NS_IN6ADDRSZ / NS_INT16SZ))
-		*tp++ = ':';
-	*tp++ = '\0';
+  /*
+   * Format the result.
+   */
+  tp = tmp;
+  for (i = 0; i < (NS_IN6ADDRSZ / NS_INT16SZ); i++)
+    {
+      /* Are we inside the best run of 0x00's? */
+      if (best.base != -1 && i >= best.base &&
+          i < (best.base + best.len))
+        {
+          if (i == best.base)
+             *tp++ = ':';
+          continue;
+        }
+      /* Are we following an initial run of 0x00s or any real hex? */
+      if (i != 0)
+        *tp++ = ':';
+      /* Is this address an encapsulated IPv4? */
+      if (i == 6 && best.base == 0 &&
+          (best.len == 6 || (best.len == 5 && words[5] == 0xffff)))
+        {
+          if (!inet_ntop4(src+12, tp, sizeof tmp - (tp - tmp)))
+            return (NULL);
+          tp += strlen(tp);
+          break;
+        }
+        tp += SPRINTF((tp, "%x", words[i]));
+    }
 
-	/*
-	 * Check for overflow, copy, and we're done.
-	 */
-	if ((size_t)(tp - tmp) > size) {
-		errno = ENOSPC;
-		return (NULL);
-	}
-	strcpy(dst, tmp);
-	return (dst);
+  /* Was it a trailing run of 0x00's? */
+  if (best.base != -1 && (best.base + best.len) == (NS_IN6ADDRSZ / NS_INT16SZ))
+    *tp++ = ':';
+  *tp++ = '\0';
+
+  /*
+   * Check for overflow, copy, and we're done.
+   */
+  if ((size_t)(tp - tmp) > size)
+    {
+      errno = ENOSPC;
+      return (NULL);
+    }
+  strcpy(dst, tmp);
+  return (dst);
 }
-
 #endif
+

ares/nameser.h

@@ -1,3 +1,5 @@
+/* $Id$ */
+
 #ifndef ARES_NAMESER_H
 #define ARES_NAMESER_H
 
@@ -16,7 +18,7 @@
 
 #define EINPROGRESS WSAEINPROGRESS
 #define EWOULDBLOCK WSAEWOULDBLOCK
-#define EMSGSIZE WSAEMSGSIZE
+#define EMSGSIZE     WSAEMSGSIZE
 #define EAFNOSUPPORT WSAEAFNOSUPPORT
 
 /* Structure for scatter/gather I/O.  */

ares/setup.h

@@ -17,9 +17,19 @@
 #ifdef HAVE_CONFIG_H
 #include "config.h"
 #else
+
+#ifdef WIN32
+#include "config-win32.h"
+#endif
+
 /* simple work-around for now, for systems without configure support */
+#ifndef __DJGPP__
 #define ssize_t int
 #endif
+#ifndef _MSC_VER
+#define socklen_t int
+#endif
+#endif  /* HAVE_CONFIG_H */
 
 /* Recent autoconf versions define these symbols in config.h. We don't want
    them (since they collide with the libcurl ones when we build
@@ -34,7 +44,8 @@
 
 /* now typedef our socket type */
 #if defined(WIN32) && !defined(WATT32)
-#include <winsock.h>
+#include <winsock2.h>
+#include <ws2tcpip.h>
 typedef SOCKET ares_socket_t;
 #define ARES_SOCKET_BAD INVALID_SOCKET
 #else
@@ -57,7 +68,7 @@ typedef int ares_socket_t;
 #endif
 
 #if (defined(WIN32) || defined(WATT32)) && \
-   !(defined(__MINGW32__) || defined(NETWARE))
+   !(defined(__MINGW32__) || defined(NETWARE) || defined(__DJGPP__))
 /* protos for the functions we provide in windows_port.c */
 int ares_strncasecmp(const char *s1, const char *s2, int n);
 int ares_strcasecmp(const char *s1, const char *s2);

ares/vc/adig/adig.mak

@@ -1,213 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on adig.dsp
-!IF "$(CFG)" == ""
-CFG=adig - Win32 Debug
-!MESSAGE No configuration specified. Defaulting to adig - Win32 Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "adig - Win32 Release" && "$(CFG)" != "adig - Win32 Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "adig.mak" CFG="adig - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "adig - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "adig - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "adig - Win32 Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-# Begin Custom Macros
-OutDir=.\Release
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "$(OUTDIR)\adig.exe"
-
-!ELSE 
-
-ALL : "areslib - Win32 Release" "$(OUTDIR)\adig.exe"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"areslib - Win32 ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\adig.obj"
-	-@erase "$(INTDIR)\getopt.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(OUTDIR)\adig.exe"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\adig.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\adig.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=wsock32.lib areslib.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\adig.pdb" /machine:I386 /out:"$(OUTDIR)\adig.exe" /libpath:"..\areslib\Release" 
-LINK32_OBJS= \
-	"$(INTDIR)\adig.obj" \
-	"$(INTDIR)\getopt.obj" \
-	"..\areslib\Release\areslib.lib"
-
-"$(OUTDIR)\adig.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ELSEIF  "$(CFG)" == "adig - Win32 Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "$(OUTDIR)\adig.exe"
-
-!ELSE 
-
-ALL : "areslib - Win32 Debug" "$(OUTDIR)\adig.exe"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"areslib - Win32 DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\adig.obj"
-	-@erase "$(INTDIR)\getopt.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\adig.exe"
-	-@erase "$(OUTDIR)\adig.ilk"
-	-@erase "$(OUTDIR)\adig.pdb"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MLd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\adig.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ  /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\adig.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=wsock32.lib areslib.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\adig.pdb" /debug /machine:I386 /out:"$(OUTDIR)\adig.exe" /pdbtype:sept /libpath:"..\areslib\Debug" 
-LINK32_OBJS= \
-	"$(INTDIR)\adig.obj" \
-	"$(INTDIR)\getopt.obj" \
-	"..\areslib\Debug\areslib.lib"
-
-"$(OUTDIR)\adig.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("adig.dep")
-!INCLUDE "adig.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "adig.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "adig - Win32 Release" || "$(CFG)" == "adig - Win32 Debug"
-SOURCE=..\..\adig.c
-
-"$(INTDIR)\adig.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\getopt.c
-
-"$(INTDIR)\getopt.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!IF  "$(CFG)" == "adig - Win32 Release"
-
-"areslib - Win32 Release" : 
-   cd "..\areslib"
-   $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Release" 
-   cd "..\adig"
-
-"areslib - Win32 ReleaseCLEAN" : 
-   cd "..\areslib"
-   $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Release" RECURSE=1 CLEAN 
-   cd "..\adig"
-
-!ELSEIF  "$(CFG)" == "adig - Win32 Debug"
-
-"areslib - Win32 Debug" : 
-   cd "..\areslib"
-   $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Debug" 
-   cd "..\adig"
-
-"areslib - Win32 DebugCLEAN" : 
-   cd "..\areslib"
-   $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Debug" RECURSE=1 CLEAN 
-   cd "..\adig"
-
-!ENDIF 
-
-
-!ENDIF 
-

ares/vc/adig/adig.plg

@@ -1,77 +0,0 @@
-<html>
-<body>
-<pre>
-<h1>Build Log</h1>
-<h3>
---------------------Configuration: areslib - Win32 Release--------------------
-</h3>
-<h3>Command Lines</h3>
-Creating temporary file "C:\DOCUME~1\liren\LOCALS~1\Temp\RSP615A.tmp" with contents
-[
-/nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /Fp"Release/areslib.pch" /YX /Fo"Release/" /Fd"Release/" /FD /c 
-"Z:\ARES-1.1.1\ares_gethostbyname.c"
-"Z:\ARES-1.1.1\ares_init.c"
-]
-Creating command line "cl.exe @C:\DOCUME~1\liren\LOCALS~1\Temp\RSP615A.tmp" 
-Creating temporary file "C:\DOCUME~1\liren\LOCALS~1\Temp\RSP615B.tmp" with contents
-[
-/nologo /out:"Release\areslib.lib" 
-".\Release\ares__close_sockets.obj"
-".\Release\ares__get_hostent.obj"
-".\Release\ares__read_line.obj"
-".\Release\ares_destroy.obj"
-".\Release\ares_expand_name.obj"
-".\Release\ares_fds.obj"
-".\Release\ares_free_errmem.obj"
-".\Release\ares_free_hostent.obj"
-".\Release\ares_free_string.obj"
-".\Release\ares_gethostbyaddr.obj"
-".\Release\ares_gethostbyname.obj"
-".\Release\ares_init.obj"
-".\Release\ares_mkquery.obj"
-".\Release\ares_parse_a_reply.obj"
-".\Release\ares_parse_ptr_reply.obj"
-".\Release\ares_process.obj"
-".\Release\ares_query.obj"
-".\Release\ares_search.obj"
-".\Release\ares_send.obj"
-".\Release\ares_strerror.obj"
-".\Release\ares_timeout.obj"
-".\Release\windows_port.obj"
-]
-Creating command line "link.exe -lib @C:\DOCUME~1\liren\LOCALS~1\Temp\RSP615B.tmp"
-<h3>Output Window</h3>
-Compiling...
-ares_gethostbyname.c
-Z:\ARES-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-ares_init.c
-Z:\ARES-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-Z:\ARES-1.1.1\ares_init.c(141) : warning C4013: '_getpid' undefined; assuming extern returning int
-Z:\ARES-1.1.1\ares_init.c(236) : warning C4101: 'p' : unreferenced local variable
-Z:\ARES-1.1.1\ares_init.c(237) : warning C4101: 'linesize' : unreferenced local variable
-Z:\ARES-1.1.1\ares_init.c(235) : warning C4101: 'fp' : unreferenced local variable
-Creating library...
-<h3>
---------------------Configuration: adig - Win32 Release--------------------
-</h3>
-<h3>Command Lines</h3>
-Creating temporary file "C:\DOCUME~1\liren\LOCALS~1\Temp\RSP615C.tmp" with contents
-[
-wsock32.lib areslib.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"Release/adig.pdb" /machine:I386 /out:"Release/adig.exe" /libpath:"..\areslib\Release" 
-".\Release\adig.obj"
-".\Release\getopt.obj"
-"\ARES-1.1.1\vc\areslib\Release\areslib.lib"
-]
-Creating command line "link.exe @C:\DOCUME~1\liren\LOCALS~1\Temp\RSP615C.tmp"
-<h3>Output Window</h3>
-Linking...
-
-
-
-<h3>Results</h3>
-adig.exe - 0 error(s), 6 warning(s)
-</pre>
-</body>
-</html>

ares/vc/ahost/ahost.dep

@@ -1,2 +1,2 @@
-# Microsoft Developer Studio Generated Dependency File, included by ahost.mak
-
+# Microsoft Developer Studio Generated Dependency File, included by ahost.mak
+

ares/vc/ahost/ahost.dsp

@@ -7,19 +7,19 @@
 CFG=ahost - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ahost.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ahost.mak" CFG="ahost - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "ahost - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "ahost - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -74,7 +74,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib  kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 wsock32.lib areslib.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept /libpath:"..\areslib\Debug"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

ares/vc/ahost/ahost.mak

@@ -1,223 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on ahost.dsp
-!IF "$(CFG)" == ""
-CFG=ahost - Win32 Debug
-!MESSAGE No configuration specified. Defaulting to ahost - Win32 Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "ahost - Win32 Release" && "$(CFG)" != "ahost - Win32 Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "ahost.mak" CFG="ahost - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "ahost - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "ahost - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "ahost - Win32 Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-# Begin Custom Macros
-OutDir=.\Release
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "$(OUTDIR)\ahost.exe"
-
-!ELSE 
-
-ALL : "areslib - Win32 Release" "$(OUTDIR)\ahost.exe"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"areslib - Win32 ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\ahost.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(OUTDIR)\ahost.exe"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\ahost.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\ahost.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=wsock32.lib areslib.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\ahost.pdb" /machine:I386 /out:"$(OUTDIR)\ahost.exe" /libpath:"..\areslib\Release" 
-LINK32_OBJS= \
-	"$(INTDIR)\ahost.obj" \
-	"..\areslib\Release\areslib.lib"
-
-"$(OUTDIR)\ahost.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ELSEIF  "$(CFG)" == "ahost - Win32 Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "$(OUTDIR)\ahost.exe" "$(OUTDIR)\ahost.bsc"
-
-!ELSE 
-
-ALL : "areslib - Win32 Debug" "$(OUTDIR)\ahost.exe" "$(OUTDIR)\ahost.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"areslib - Win32 DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\ahost.obj"
-	-@erase "$(INTDIR)\ahost.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\ahost.bsc"
-	-@erase "$(OUTDIR)\ahost.exe"
-	-@erase "$(OUTDIR)\ahost.ilk"
-	-@erase "$(OUTDIR)\ahost.pdb"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MLd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fp"$(INTDIR)\ahost.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ  /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\ahost.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\ahost.sbr"
-
-"$(OUTDIR)\ahost.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=wsock32.lib areslib.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\ahost.pdb" /debug /machine:I386 /out:"$(OUTDIR)\ahost.exe" /pdbtype:sept /libpath:"..\areslib\Debug" 
-LINK32_OBJS= \
-	"$(INTDIR)\ahost.obj" \
-	"..\areslib\Debug\areslib.lib"
-
-"$(OUTDIR)\ahost.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("ahost.dep")
-!INCLUDE "ahost.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "ahost.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "ahost - Win32 Release" || "$(CFG)" == "ahost - Win32 Debug"
-SOURCE=..\..\ahost.c
-
-!IF  "$(CFG)" == "ahost - Win32 Release"
-
-
-"$(INTDIR)\ahost.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ahost - Win32 Debug"
-
-
-"$(INTDIR)\ahost.obj"	"$(INTDIR)\ahost.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-!IF  "$(CFG)" == "ahost - Win32 Release"
-
-"areslib - Win32 Release" : 
-   cd "..\areslib"
-   $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Release" 
-   cd "..\ahost"
-
-"areslib - Win32 ReleaseCLEAN" : 
-   cd "..\areslib"
-   $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Release" RECURSE=1 CLEAN 
-   cd "..\ahost"
-
-!ELSEIF  "$(CFG)" == "ahost - Win32 Debug"
-
-"areslib - Win32 Debug" : 
-   cd "..\areslib"
-   $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Debug" 
-   cd "..\ahost"
-
-"areslib - Win32 DebugCLEAN" : 
-   cd "..\areslib"
-   $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Debug" RECURSE=1 CLEAN 
-   cd "..\ahost"
-
-!ENDIF 
-
-
-!ENDIF 
-

ares/vc/ahost/ahost.plg

@@ -1,16 +0,0 @@
-<html>
-<body>
-<pre>
-<h1>Build Log</h1>
-<h3>
---------------------Configuration: ahost - Win32 Release--------------------
-</h3>
-<h3>Command Lines</h3>
-
-
-
-<h3>Results</h3>
-ahost.exe - 0 error(s), 0 warning(s)
-</pre>
-</body>
-</html>

ares/vc/areslib/areslib.dsp

@@ -63,8 +63,8 @@ LIB32=link.exe -lib
 # PROP Output_Dir "Debug"
 # PROP Intermediate_Dir "Debug"
 # PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ  /c
-# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /I "..\.." /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ  /c
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
+# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /I "..\.." /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
 # ADD BASE RSC /l 0x409 /d "_DEBUG"
 # ADD RSC /l 0x409 /d "_DEBUG"
 BSC32=bscmake.exe
@@ -97,6 +97,10 @@ SOURCE=..\..\ares__read_line.c
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\ares_cancel.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\ares_destroy.c
 # End Source File
 # Begin Source File
@@ -137,6 +141,10 @@ SOURCE=..\..\ares_parse_a_reply.c
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\ares_parse_aaaa_reply.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\ares_parse_ptr_reply.c
 # End Source File
 # Begin Source File
@@ -153,14 +161,6 @@ SOURCE=..\..\ares_search.c
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\ares_cancel.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\ares_version.c
-# End Source File
-# Begin Source File
-
 SOURCE=..\..\ares_send.c
 # End Source File
 # Begin Source File
@@ -173,6 +173,22 @@ SOURCE=..\..\ares_timeout.c
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\ares_version.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\bitncmp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inet_net_pton.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inet_ntop.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\windows_port.c
 # End Source File
 # End Group
@@ -189,7 +205,7 @@ SOURCE=..\..\ares_dns.h
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\ares_version.h
+SOURCE=..\..\ares_ipv6.h
 # End Source File
 # Begin Source File
 
@@ -197,6 +213,22 @@ SOURCE=..\..\ares_private.h
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\ares_version.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\bitncmp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inet_net_pton.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inet_ntop.h
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\nameser.h
 # End Source File
 # End Group

ares/vc/areslib/areslib.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "areslib"=.\areslib.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

ares/vc/areslib/areslib.mak

@@ -1,367 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on areslib.dsp
-!IF "$(CFG)" == ""
-CFG=areslib - Win32 Debug
-!MESSAGE No configuration specified. Defaulting to areslib - Win32 Debug.
-!ENDIF
-
-!IF "$(CFG)" != "areslib - Win32 Release" && "$(CFG)" != "areslib - Win32 Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "areslib.mak" CFG="areslib - Win32 Debug"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "areslib - Win32 Release" (based on "Win32 (x86) Static Library")
-!MESSAGE "areslib - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE
-!ERROR An invalid configuration is specified.
-!ENDIF
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE
-NULL=nul
-!ENDIF
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "areslib - Win32 Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-# Begin Custom Macros
-OutDir=.\Release
-# End Custom Macros
-
-ALL : "$(OUTDIR)\areslib.lib"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\ares__close_sockets.obj"
-	-@erase "$(INTDIR)\ares__get_hostent.obj"
-	-@erase "$(INTDIR)\ares__read_line.obj"
-	-@erase "$(INTDIR)\ares_destroy.obj"
-	-@erase "$(INTDIR)\ares_expand_name.obj"
-	-@erase "$(INTDIR)\ares_fds.obj"
-	-@erase "$(INTDIR)\ares_free_hostent.obj"
-	-@erase "$(INTDIR)\ares_free_string.obj"
-	-@erase "$(INTDIR)\ares_gethostbyaddr.obj"
-	-@erase "$(INTDIR)\ares_gethostbyname.obj"
-	-@erase "$(INTDIR)\ares_init.obj"
-	-@erase "$(INTDIR)\ares_mkquery.obj"
-	-@erase "$(INTDIR)\ares_parse_a_reply.obj"
-	-@erase "$(INTDIR)\ares_parse_ptr_reply.obj"
-	-@erase "$(INTDIR)\ares_process.obj"
-	-@erase "$(INTDIR)\ares_query.obj"
-	-@erase "$(INTDIR)\ares_search.obj"
-	-@erase "$(INTDIR)\ares_send.obj"
-	-@erase "$(INTDIR)\ares_strerror.obj"
-	-@erase "$(INTDIR)\ares_timeout.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\windows_port.obj"
-	-@erase "$(OUTDIR)\areslib.lib"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /Fp"$(INTDIR)\areslib.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\areslib.bsc"
-BSC32_SBRS= \
-
-LIB32=link.exe -lib
-LIB32_FLAGS=/nologo /out:"$(OUTDIR)\areslib.lib"
-LIB32_OBJS= \
-	"$(INTDIR)\ares__close_sockets.obj" \
-	"$(INTDIR)\ares__get_hostent.obj" \
-	"$(INTDIR)\ares__read_line.obj" \
-	"$(INTDIR)\ares_destroy.obj" \
-	"$(INTDIR)\ares_expand_name.obj" \
-	"$(INTDIR)\ares_fds.obj" \
-	"$(INTDIR)\ares_free_hostent.obj" \
-	"$(INTDIR)\ares_free_string.obj" \
-	"$(INTDIR)\ares_gethostbyaddr.obj" \
-	"$(INTDIR)\ares_gethostbyname.obj" \
-	"$(INTDIR)\ares_init.obj" \
-	"$(INTDIR)\ares_mkquery.obj" \
-	"$(INTDIR)\ares_parse_a_reply.obj" \
-	"$(INTDIR)\ares_parse_ptr_reply.obj" \
-	"$(INTDIR)\ares_process.obj" \
-	"$(INTDIR)\ares_query.obj" \
-	"$(INTDIR)\ares_search.obj" \
-	"$(INTDIR)\ares_cancel.obj" \
-	"$(INTDIR)\ares_version.obj" \
-	"$(INTDIR)\ares_send.obj" \
-	"$(INTDIR)\ares_strerror.obj" \
-	"$(INTDIR)\ares_timeout.obj" \
-	"$(INTDIR)\windows_port.obj"
-
-"$(OUTDIR)\areslib.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)
-    $(LIB32) @<<
-  $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)
-<<
-
-!ELSEIF  "$(CFG)" == "areslib - Win32 Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-ALL : "$(OUTDIR)\areslib.lib"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\ares__close_sockets.obj"
-	-@erase "$(INTDIR)\ares__get_hostent.obj"
-	-@erase "$(INTDIR)\ares__read_line.obj"
-	-@erase "$(INTDIR)\ares_destroy.obj"
-	-@erase "$(INTDIR)\ares_expand_name.obj"
-	-@erase "$(INTDIR)\ares_fds.obj"
-	-@erase "$(INTDIR)\ares_free_hostent.obj"
-	-@erase "$(INTDIR)\ares_free_string.obj"
-	-@erase "$(INTDIR)\ares_gethostbyaddr.obj"
-	-@erase "$(INTDIR)\ares_gethostbyname.obj"
-	-@erase "$(INTDIR)\ares_init.obj"
-	-@erase "$(INTDIR)\ares_mkquery.obj"
-	-@erase "$(INTDIR)\ares_parse_a_reply.obj"
-	-@erase "$(INTDIR)\ares_parse_ptr_reply.obj"
-	-@erase "$(INTDIR)\ares_process.obj"
-	-@erase "$(INTDIR)\ares_query.obj"
-	-@erase "$(INTDIR)\ares_search.obj"
-	-@erase "$(INTDIR)\ares_cancel.obj"
-	-@erase "$(INTDIR)\ares_version.obj"
-	-@erase "$(INTDIR)\ares_send.obj"
-	-@erase "$(INTDIR)\ares_strerror.obj"
-	-@erase "$(INTDIR)\ares_timeout.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(INTDIR)\windows_port.obj"
-	-@erase "$(OUTDIR)\areslib.lib"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MLd /W3 /Gm /GX /ZI /Od /I "..\.." /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /Fp"$(INTDIR)\areslib.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ  /c
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\areslib.bsc"
-BSC32_SBRS= \
-
-LIB32=link.exe -lib
-LIB32_FLAGS=/nologo /out:"$(OUTDIR)\areslib.lib"
-LIB32_OBJS= \
-	"$(INTDIR)\ares__close_sockets.obj" \
-	"$(INTDIR)\ares__get_hostent.obj" \
-	"$(INTDIR)\ares__read_line.obj" \
-	"$(INTDIR)\ares_destroy.obj" \
-	"$(INTDIR)\ares_expand_name.obj" \
-	"$(INTDIR)\ares_fds.obj" \
-	"$(INTDIR)\ares_free_hostent.obj" \
-	"$(INTDIR)\ares_free_string.obj" \
-	"$(INTDIR)\ares_gethostbyaddr.obj" \
-	"$(INTDIR)\ares_gethostbyname.obj" \
-	"$(INTDIR)\ares_init.obj" \
-	"$(INTDIR)\ares_mkquery.obj" \
-	"$(INTDIR)\ares_parse_a_reply.obj" \
-	"$(INTDIR)\ares_parse_ptr_reply.obj" \
-	"$(INTDIR)\ares_process.obj" \
-	"$(INTDIR)\ares_query.obj" \
-	"$(INTDIR)\ares_search.obj" \
-	"$(INTDIR)\ares_send.obj" \
-	"$(INTDIR)\ares_strerror.obj" \
-	"$(INTDIR)\ares_timeout.obj" \
-	"$(INTDIR)\windows_port.obj"
-
-"$(OUTDIR)\areslib.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)
-    $(LIB32) @<<
-  $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)
-<<
-
-!ENDIF
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $<
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $<
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $<
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $<
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $<
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $<
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("areslib.dep")
-!INCLUDE "areslib.dep"
-!ELSE
-!MESSAGE Warning: cannot find "areslib.dep"
-!ENDIF
-!ENDIF
-
-
-!IF "$(CFG)" == "areslib - Win32 Release" || "$(CFG)" == "areslib - Win32 Debug"
-SOURCE=..\..\ares__close_sockets.c
-
-"$(INTDIR)\ares__close_sockets.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares__get_hostent.c
-
-"$(INTDIR)\ares__get_hostent.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares__read_line.c
-
-"$(INTDIR)\ares__read_line.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_destroy.c
-
-"$(INTDIR)\ares_destroy.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_expand_name.c
-
-"$(INTDIR)\ares_expand_name.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_fds.c
-
-"$(INTDIR)\ares_fds.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_free_hostent.c
-
-"$(INTDIR)\ares_free_hostent.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_free_string.c
-
-"$(INTDIR)\ares_free_string.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_gethostbyaddr.c
-
-"$(INTDIR)\ares_gethostbyaddr.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_gethostbyname.c
-
-"$(INTDIR)\ares_gethostbyname.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_init.c
-
-"$(INTDIR)\ares_init.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_mkquery.c
-
-"$(INTDIR)\ares_mkquery.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_parse_a_reply.c
-
-"$(INTDIR)\ares_parse_a_reply.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_parse_ptr_reply.c
-
-"$(INTDIR)\ares_parse_ptr_reply.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_process.c
-
-"$(INTDIR)\ares_process.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_query.c
-
-"$(INTDIR)\ares_query.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_search.c
-
-"$(INTDIR)\ares_search.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_version.c
-
-"$(INTDIR)\ares_version.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_cancel.c
-
-"$(INTDIR)\ares_cancel.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_send.c
-
-"$(INTDIR)\ares_send.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_strerror.c
-
-"$(INTDIR)\ares_strerror.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\ares_timeout.c
-
-"$(INTDIR)\ares_timeout.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\windows_port.c
-
-"$(INTDIR)\windows_port.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-
-!ENDIF
-

ares/vc/areslib/areslib.plg

@@ -1,125 +0,0 @@
-<html>
-<body>
-<pre>
-<h1>Build Log</h1>
-<h3>
---------------------Configuration: areslib - Win32 Release--------------------
-</h3>
-<h3>Command Lines</h3>
-Creating temporary file "C:\DOCUME~1\liren\LOCALS~1\Temp\RSP603D.tmp" with contents
-[
-/nologo /MD /W3 /GX /O2 /I "..\.." /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /Fp"Release/areslib.pch" /YX /Fo"Release/" /Fd"Release/" /FD /c 
-"Z:\ares-1.1.1\ares__close_sockets.c"
-"Z:\ares-1.1.1\ares__get_hostent.c"
-"Z:\ares-1.1.1\ares__read_line.c"
-"Z:\ares-1.1.1\ares_destroy.c"
-"Z:\ares-1.1.1\ares_expand_name.c"
-"Z:\ares-1.1.1\ares_fds.c"
-"Z:\ares-1.1.1\ares_free_errmem.c"
-"Z:\ares-1.1.1\ares_free_hostent.c"
-"Z:\ares-1.1.1\ares_free_string.c"
-"Z:\ares-1.1.1\ares_gethostbyaddr.c"
-"Z:\ares-1.1.1\ares_gethostbyname.c"
-"Z:\ares-1.1.1\ares_init.c"
-"Z:\ares-1.1.1\ares_mkquery.c"
-"Z:\ares-1.1.1\ares_parse_a_reply.c"
-"Z:\ares-1.1.1\ares_parse_ptr_reply.c"
-"Z:\ares-1.1.1\ares_process.c"
-"Z:\ares-1.1.1\ares_query.c"
-"Z:\ares-1.1.1\ares_search.c"
-"Z:\ares-1.1.1\ares_send.c"
-"Z:\ares-1.1.1\ares_strerror.c"
-"Z:\ares-1.1.1\ares_timeout.c"
-"Z:\ares-1.1.1\windows_port.c"
-]
-Creating command line "cl.exe @C:\DOCUME~1\liren\LOCALS~1\Temp\RSP603D.tmp" 
-Creating temporary file "C:\DOCUME~1\liren\LOCALS~1\Temp\RSP603E.tmp" with contents
-[
-/nologo /out:"Release\areslib.lib" 
-".\Release\ares__close_sockets.obj"
-".\Release\ares__get_hostent.obj"
-".\Release\ares__read_line.obj"
-".\Release\ares_destroy.obj"
-".\Release\ares_expand_name.obj"
-".\Release\ares_fds.obj"
-".\Release\ares_free_errmem.obj"
-".\Release\ares_free_hostent.obj"
-".\Release\ares_free_string.obj"
-".\Release\ares_gethostbyaddr.obj"
-".\Release\ares_gethostbyname.obj"
-".\Release\ares_init.obj"
-".\Release\ares_mkquery.obj"
-".\Release\ares_parse_a_reply.obj"
-".\Release\ares_parse_ptr_reply.obj"
-".\Release\ares_process.obj"
-".\Release\ares_query.obj"
-".\Release\ares_search.obj"
-".\Release\ares_send.obj"
-".\Release\ares_strerror.obj"
-".\Release\ares_timeout.obj"
-".\Release\windows_port.obj"
-]
-Creating command line "link.exe -lib @C:\DOCUME~1\liren\LOCALS~1\Temp\RSP603E.tmp"
-<h3>Output Window</h3>
-Compiling...
-ares__close_sockets.c
-Z:\ares-1.1.1\ares__close_sockets.c(46) : warning C4013: 'close' undefined; assuming extern returning int
-ares__get_hostent.c
-ares__read_line.c
-ares_destroy.c
-ares_expand_name.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-ares_fds.c
-ares_free_errmem.c
-ares_free_hostent.c
-ares_free_string.c
-ares_gethostbyaddr.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-ares_gethostbyname.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-ares_init.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-Z:\ares-1.1.1\ares_init.c(141) : warning C4013: '_getpid' undefined; assuming extern returning int
-Z:\ares-1.1.1\ares_init.c(236) : warning C4101: 'p' : unreferenced local variable
-Z:\ares-1.1.1\ares_init.c(237) : warning C4101: 'linesize' : unreferenced local variable
-Z:\ares-1.1.1\ares_init.c(235) : warning C4101: 'fp' : unreferenced local variable
-ares_mkquery.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-ares_parse_a_reply.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-Z:\ares-1.1.1\ares_parse_a_reply.c(90) : warning C4018: '<' : signed/unsigned mismatch
-ares_parse_ptr_reply.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-Z:\ares-1.1.1\ares_parse_ptr_reply.c(71) : warning C4018: '<' : signed/unsigned mismatch
-ares_process.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-ares_query.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-ares_search.c
-Z:\ares-1.1.1\ares_search.c(229) : warning C4013: 'strncasecmp' undefined; assuming extern returning int
-ares_send.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-ares_strerror.c
-ares_timeout.c
-windows_port.c
-Z:\ares-1.1.1\nameser.h(153) : warning C4005: 'NOERROR' : macro redefinition
-        C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\winerror.h(8022) : see previous definition of 'NOERROR'
-Creating library...
-
-
-
-<h3>Results</h3>
-areslib.lib - 0 error(s), 19 warning(s)
-</pre>
-</body>
-</html>

buildconf

@@ -13,7 +13,7 @@ findtool(){
   IFS=":"
   for path in $PATH
   do
-    if test -r "$path/$file"; then
+    if test -f "$path/$file"; then
       echo "$path/$file"
       return
     fi
@@ -24,7 +24,7 @@ findtool(){
 # autoconf 2.57 or newer
 #
 need_autoconf="2.57"
-ac_version=`${AUTOCONF:-autoconf} --version 2>/dev/null|head -1| sed -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'`
+ac_version=`${AUTOCONF:-autoconf} --version 2>/dev/null|head -n 1| sed -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'`
 if test -z "$ac_version"; then
   echo "buildconf: autoconf not found."
   echo "            You need autoconf version $need_autoconf or newer installed."
@@ -45,7 +45,7 @@ echo "buildconf: autoconf version $ac_version (ok)"
 #--------------------------------------------------------------------------
 # autoheader 2.50 or newer
 #
-ah_version=`${AUTOHEADER:-autoheader} --version 2>/dev/null|head -1| sed -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'`
+ah_version=`${AUTOHEADER:-autoheader} --version 2>/dev/null|head -n 1| sed -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'`
 if test -z "$ah_version"; then
   echo "buildconf: autoheader not found."
   echo "            You need autoheader version 2.50 or newer installed."
@@ -67,7 +67,7 @@ echo "buildconf: autoheader version $ah_version (ok)"
 # automake 1.7 or newer
 #
 need_automake="1.7"
-am_version=`${AUTOMAKE:-automake} --version 2>/dev/null|head -1| sed -e 's/^.* \([0-9]\)/\1/' -e 's/[a-z]* *$//' -e 's/\(.*\)\(-p.*\)/\1/'`
+am_version=`${AUTOMAKE:-automake} --version 2>/dev/null|head -n 1| sed -e 's/^.* \([0-9]\)/\1/' -e 's/[a-z]* *$//' -e 's/\(.*\)\(-p.*\)/\1/'`
 if test -z "$am_version"; then
   echo "buildconf: automake not found."
   echo "            You need automake version $need_automake or newer installed."
@@ -113,7 +113,7 @@ fi
 # set the LIBTOOLIZE here so that glibtoolize is used if glibtool was found
 LIBTOOLIZE="${libtool}ize"
 
-lt_pversion=`$libtool --version 2>/dev/null|head -1|sed -e 's/^[^0-9]*//g' -e 's/[- ].*//'`
+lt_pversion=`$libtool --version 2>/dev/null|head -n 1|sed -e 's/^[^0-9]*//g' -e 's/[- ].*//'`
 if test -z "$lt_pversion"; then
   echo "buildconf: libtool not found."
   echo "            You need libtool version $LIBTOOL_WANTED_VERSION or newer installed"
@@ -160,7 +160,7 @@ fi
 #--------------------------------------------------------------------------
 # m4 check
 #
-m4=`${M4:-m4} --version 2>/dev/null|head -1`;
+m4=`${M4:-m4} --version 2>/dev/null|head -n 1`;
 m4_version=`echo $m4 | sed -e 's/^.* \([0-9]\)/\1/' -e 's/[a-z]* *$//'`
 
 if { echo $m4 | grep "GNU" >/dev/null 2>&1; } then
@@ -199,15 +199,17 @@ ${AUTOCONF:-autoconf}     || die "The autoconf command failed"
 
 if test -d ares; then
   cd ares
-  echo "buildconf: running aclocal in the ares directory"
+  echo "buildconf: running ares/libtoolize"
+${LIBTOOLIZE:-libtoolize} --copy --automake --force || die "The libtool command failed"
+  echo "buildconf: running ares/aclocal"
   ${ACLOCAL:-aclocal} $ACLOCAL_FLAGS || die "The ares aclocal command failed"
-  echo "buildconf: running autoconf in the ares directory"
+  echo "buildconf: running ares/autoconf"
   ${AUTOCONF:-autoconf}     || die "The ares autoconf command failed"
   cd ..
 fi
 
 echo "buildconf: running automake"
-${AUTOMAKE:-automake} -a  || die "The automake command failed"
+${AUTOMAKE:-automake} -a -c  || die "The automake command failed"
 
 echo "buildconf: OK"
 exit 0

configure.ac

@@ -122,13 +122,13 @@ case $host in
   *-*-mingw*)
     AC_DEFINE(BUILDING_LIBCURL, 1, [when building libcurl itself])
     AC_MSG_RESULT(yes)
- <EFBFBD> <20>AC_MSG_CHECKING([if we need CURL_STATICLIB])
+    AC_MSG_CHECKING([if we need CURL_STATICLIB])
     if test "X$enable_shared" = "Xno"
     then
       AC_DEFINE(CURL_STATICLIB, 1, [when not building a shared library])
       AC_MSG_RESULT(yes)
- <EFBFBD> <20>else
- <EFBFBD> <20> <20>AC_MSG_RESULT(no)
+    else
+      AC_MSG_RESULT(no)
     fi
     ;;
   *)
@@ -251,6 +251,21 @@ AC_HELP_STRING([--disable-telnet],[Disable TELNET support]),
   esac ],
        AC_MSG_RESULT(yes)
 )
+AC_MSG_CHECKING([whether to support tftp])
+AC_ARG_ENABLE(tftp,
+AC_HELP_STRING([--enable-tftp],[Enable TFTP support])
+AC_HELP_STRING([--disable-tftp],[Disable TFTP support]),
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_TFTP, 1, [to disable TFTP])
+       AC_SUBST(CURL_DISABLE_TFTP, [1])
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
 
 dnl **********************************************************************
 dnl Check for built-in manual
@@ -567,14 +582,15 @@ OPT_KRB4=off
 AC_ARG_WITH(krb4,dnl
 AC_HELP_STRING([--with-krb4=DIR],[where to look for Kerberos4]),[
   OPT_KRB4="$withval"
-  if test X"$OPT_KRB4" != Xyes
-  then
-    LDFLAGS="$LDFLAGS -L$OPT_KRB4/lib$libsuff"
-    KRB4LIB="$OPT_KRB4/lib$libsuff"
-    CPPFLAGS="$CPPFLAGS -I$OPT_KRB4/include"
-    KRB4INC="$OPT_KRB4/include"
+  if test X"$OPT_KRB4" != Xno; then
+    want_krb4="yes"
+    if test X"$OPT_KRB4" != Xyes; then
+      LDFLAGS="$LDFLAGS -L$OPT_KRB4/lib$libsuff"
+      KRB4LIB="$OPT_KRB4/lib$libsuff"
+      CPPFLAGS="$CPPFLAGS -I$OPT_KRB4/include"
+      KRB4INC="$OPT_KRB4/include"
+    fi
   fi
-  want_krb4="yes"
  ])
 
 AC_MSG_CHECKING([if Kerberos4 support is requested])
@@ -643,10 +659,13 @@ dnl **********************************************************************
 
 AC_ARG_WITH(spnego,
   AC_HELP_STRING([--with-spnego=DIR],
-                 [Specify location of SPNEGO library fbopenssl]),
-  [ SPNEGO_ROOT="$withval"
-    want_spnego="yes" ]
-)
+                 [Specify location of SPNEGO library fbopenssl]), [
+  SPNEGO_ROOT="$withval"
+  if test x"$SPNEGO_ROOT" != xno; then
+    want_spnego="yes"
+  fi
+])
+
 AC_MSG_CHECKING([if SPNEGO support is requested])
 if test x"$want_spnego" = xyes; then
 
@@ -683,19 +702,24 @@ AC_ARG_WITH(gssapi-includes,
 AC_ARG_WITH(gssapi-libs,
   AC_HELP_STRING([--with-gssapi-libs=DIR],
   		 [Specify location of GSSAPI libs]),
-  [ GSSAPI_LIBS="-L$withval -lgssapi"
+  [ GSSAPI_LIBS="-L$withval"
     want_gss="yes" ]
 )
 
 AC_ARG_WITH(gssapi,
   AC_HELP_STRING([--with-gssapi=DIR],
-                 [Where to look for GSSAPI]),
-  [ GSSAPI_ROOT="$withval"
-    want_gss="yes" ]
-)
+                 [Where to look for GSSAPI]), [
+  GSSAPI_ROOT="$withval"
+  if test x"$GSSAPI_ROOT" != xno; then
+    want_gss="yes" 
+  fi
+])
 
+save_CPPFLAGS="$CPPFLAGS"
 AC_MSG_CHECKING([if GSSAPI support is requested])
 if test x"$want_gss" = xyes; then
+  AC_MSG_RESULT(yes)
+
   if test -z "$GSSAPI_INCS"; then
      if test -f "$GSSAPI_ROOT/bin/krb5-config"; then
         GSSAPI_INCS=`$GSSAPI_ROOT/bin/krb5-config --cflags gssapi`
@@ -704,8 +728,49 @@ if test x"$want_gss" = xyes; then
      fi
   fi
   CPPFLAGS="$CPPFLAGS $GSSAPI_INCS"
-  
-  if test -z "$GSSAPI_LIB_DIR"; then
+
+  AC_CHECK_HEADER(gss.h,
+    [
+      dnl found in the given dirs
+      AC_DEFINE(HAVE_GSSGNU, 1, [if you have the GNU gssapi libraries])
+      gnu_gss=yes
+    ],
+    [
+      dnl not found, check Heimdal
+      AC_CHECK_HEADER(gssapi.h,
+        [
+          dnl found in the given dirs
+          AC_DEFINE(HAVE_GSSHEIMDAL, 1, [if you have the Heimdal gssapi libraries])
+        ],
+        [
+          dnl not found, check in gssapi/ subdir 
+          AC_CHECK_HEADER(gssapi/gssapi.h,
+            [
+              dnl found 
+              AC_DEFINE(HAVE_GSSMIT, 1, [if you have the MIT gssapi libraries])
+            ],
+            [
+              dnl no header found, disabling GSS
+              want_gss=no
+              AC_MSG_WARN(disabling GSSAPI since no header files was found)
+            ]
+          )
+        ]
+      )        
+    ]
+  )
+else
+  AC_MSG_RESULT(no)
+fi
+if test x"$want_gss" = xyes; then
+  AC_DEFINE(HAVE_GSSAPI, 1, [if you have the gssapi libraries])
+
+  curl_gss_msg="enabled (MIT/Heimdal)"
+
+  if test -n "$gnu_gss"; then
+    curl_gss_msg="enabled (GNU GSS)"
+    LDFLAGS="$LDFLAGS $GSSAPI_LIB_DIR -lgss"
+  elif test -z "$GSSAPI_LIB_DIR"; then
      if test -f "$GSSAPI_ROOT/bin/krb5-config"; then
         gss_ldflags=`$GSSAPI_ROOT/bin/krb5-config --libs gssapi`
 	LDFLAGS="$LDFLAGS $gss_ldflags"
@@ -715,31 +780,10 @@ if test x"$want_gss" = xyes; then
         LDFLAGS="$LDFLAGS -lgssapi"
      fi
   else
-     LDFLAGS="$LDFLAGS $GSSAPI_LIB_DIR"
+     LDFLAGS="$LDFLAGS $GSSAPI_LIB_DIR -lgssapi"
   fi
-
-  AC_MSG_RESULT(yes)
-  AC_DEFINE(HAVE_GSSAPI, 1, [if you have the gssapi libraries])
-
-  curl_gss_msg="enabled"
-
-  AC_CHECK_HEADER(gssapi.h,
-    [
-       dnl found in the given dirs
-      AC_DEFINE(HAVE_GSSHEIMDAL, 1, [if you have the Heimdal gssapi libraries])
-    ],
-    [
-      dnl not found, check in gssapi/ subdir 
-      AC_CHECK_HEADER(gssapi/gssapi.h,
-        dnl found 
-        AC_DEFINE(HAVE_GSSMIT, 1, [if you have the MIT gssapi libraries])
-      )
-      
-    ]
-  )
-
 else
-  AC_MSG_RESULT(no)
+  CPPFLAGS="$save_CPPFLAGS"
 fi
   
 dnl **********************************************************************
@@ -768,20 +812,24 @@ if test X"$OPT_SSL" != Xno; then
       dnl only do pkg-config magic when not cross-compiling
       PKGTEST="yes"
     fi
-    EXTRA_SSL=/usr/local/ssl ;;
+    PREFIX_OPENSSL=/usr/local/ssl
+    LIB_OPENSSL="$PREFIX_OPENSSL/lib$libsuff"
+    ;;
   off)
     dnl no --with-ssl option given, just check default places
     if test x$cross_compiling != xyes; then
       dnl only do pkg-config magic when not cross-compiling
       PKGTEST="yes"
     fi
-    EXTRA_SSL= ;;
+    PREFIX_OPENSSL=
+    ;;
   *)
     dnl check the given --with-ssl spot
     PKGTEST="no"
-    EXTRA_SSL=$OPT_SSL
-    LDFLAGS="$LDFLAGS -L$EXTRA_SSL/lib$libsuff"
-    CPPFLAGS="$CPPFLAGS -I$EXTRA_SSL/include/openssl -I$EXTRA_SSL/include"
+    PREFIX_OPENSSL=$OPT_SSL
+    LIB_OPENSSL="$PREFIX_OPENSSL/lib$libsuff"
+    LDFLAGS="$LDFLAGS -L$LIB_OPENSSL"
+    CPPFLAGS="$CPPFLAGS -I$PREFIX_OPENSSL/include/openssl -I$PREFIX_OPENSSL/include"
     ;;
   esac
 
@@ -803,6 +851,8 @@ if test X"$OPT_SSL" != Xno; then
         SSL_LDFLAGS=`$PKGCONFIG --libs-only-L openssl 2>/dev/null`
         SSL_CPPFLAGS=`$PKGCONFIG --cflags-only-I openssl 2>/dev/null`
 
+	LIB_OPENSSL=`echo $SSL_LDFLAGS | sed -e 's/-L//g'`
+
         dnl use the values pkg-config reported
         LIBS="$LIBS $SSL_LIBS"
         CPPFLAGS="$CPPFLAGS $SSL_CPPFLAGS"
@@ -832,8 +882,8 @@ if test X"$OPT_SSL" != Xno; then
      HAVECRYPTO="yes"
      LIBS="-lcrypto $LIBS"
      ],[
-     LDFLAGS="$CLEANLDFLAGS -L$EXTRA_SSL/lib$libsuff"
-     CPPFLAGS="$CLEANCPPFLAGS -I$EXTRA_SSL/include/openssl -I$EXTRA_SSL/include"
+     LDFLAGS="$CLEANLDFLAGS -L$LIB_OPENSSL"
+     CPPFLAGS="$CLEANCPPFLAGS -I$PREFIX_OPENSSL/include/openssl -I$PREFIX_OPENSSL/include"
      AC_CHECK_LIB(crypto, CRYPTO_add_lock,[
        HAVECRYPTO="yes"
        LIBS="-lcrypto $LIBS"], [
@@ -918,11 +968,15 @@ if test X"$OPT_SSL" != Xno; then
   fi
 
   if test "$OPENSSL_ENABLED" = "1"; then
-    dnl when the ssl shared libs were found in a path that the run-time linker
-    dnl doesn't search through, we need to add it to LD_LIBRARY_PATH to
-    dnl prevent further configure tests to fail due to this
-    LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$EXTRA_SSL/lib$libsuff"
-    export LD_LIBRARY_PATH
+    if test -n "$LIB_OPENSSL"; then
+       dnl when the ssl shared libs were found in a path that the run-time
+       dnl linker doesn't search through, we need to add it to LD_LIBRARY_PATH
+       dnl to prevent further configure tests to fail due to this
+
+       LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$LIB_OPENSSL"
+       export LD_LIBRARY_PATH
+       AC_MSG_NOTICE([Added $LIB_OPENSSL to LD_LIBRARY_PATH])
+    fi
   fi
 
 fi
@@ -964,7 +1018,7 @@ dnl FIX: only check for GnuTLS if OpenSSL is not enabled
 dnl ----------------------------------------------------
 
 dnl Default to compiler & linker defaults for GnuTLS files & libraries.
-OPT_GNUTLS=off
+OPT_GNUTLS=no
 
 AC_ARG_WITH(gnutls,dnl
 AC_HELP_STRING([--with-gnutls=PATH],[where to look for GnuTLS, PATH points to the installation root (default: /usr/local/)])
@@ -973,7 +1027,7 @@ AC_HELP_STRING([--without-gnutls], [disable GnuTLS detection]),
 
 if test "$OPENSSL_ENABLED" != "1"; then
 
-  if test X"$OPT_GNUTLS" != Xoff; then
+  if test X"$OPT_GNUTLS" != Xno; then
     if test "x$OPT_GNUTLS" = "xyes"; then
      check=`libgnutls-config --version 2>/dev/null`
      if test -n "$check"; then
@@ -1023,6 +1077,7 @@ if test "$OPENSSL_ENABLED" != "1"; then
 
         LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$gtlsprefix/lib$libsuff"
         export LD_LIBRARY_PATH
+        AC_MSG_NOTICE([Added $gtlsprefix/lib$libsuff to LD_LIBRARY_PATH])
       fi
 
     fi
@@ -1168,7 +1223,6 @@ case "$LIBIDN" in
        dnl if there is a given path, check that FIRST
        if test -n "$LIBIDN"; then
          if test "x$LIBIDN" != "xyes"; then
-            AC_MSG_WARN([moo moo $LIBIDN])
             oldLDFLAGS=$LDFLAGS
             oldCPPFLAGS=$CPPFLAGS
             LDFLAGS="$LDFLAGS -L$LIBIDN/lib"
@@ -1254,7 +1308,7 @@ else
   dnl is there a strerror_r()
   CURL_CHECK_STRERROR_R()
 
-  AC_CHECK_FUNCS( gmtime_r )
+  checkfor_gmtime_r="yes"
 fi
 
 dnl for recent AIX versions, we skip all the thread-safe checks above since
@@ -1290,7 +1344,47 @@ if test "x$RECENTAIX" = "xyes"; then
   dnl is there a strerror_r()
   CURL_CHECK_STRERROR_R()
 
-  AC_CHECK_FUNCS( gmtime_r )
+  checkfor_gmtime_r="yes"
+fi
+
+if test x$cross_compiling != xyes; then
+
+  if test x$checkfor_gmtime_r = xyes; then
+
+    dnl if gmtime_r was found, verify that it actuall works, as (at least) HPUX
+    dnl 10.20 is known to have a buggy one. If it doesn't work, disable use of
+    dnl it.
+
+    AC_MSG_CHECKING([if gmtime_r exists and works])
+    AC_RUN_IFELSE([[
+    #include <time.h>
+    int main(void)
+    {
+    time_t local = 1170352587;
+    struct tm *gmt;
+    struct tm keeper;
+    putenv("TZ=CST6CDT");
+    tzset();
+    gmt = gmtime_r(&local, &keeper);
+    if(gmt) {
+      return 0;
+    }
+    return 1; /* failure */
+    }
+     ]],
+     dnl success, do nothing
+     AC_MSG_RESULT(yes)
+     AC_DEFINE(HAVE_GMTIME_R, 1, [if you have (a working) gmtime_r])
+     ,
+     dnl failure, now disable the function
+     AC_MSG_RESULT(no)
+    ,
+    dnl not invoked when crosscompiling)
+    ])
+  fi
+else
+  dnl and for crosscompilings
+  AC_CHECK_FUNCS(gmtime_r)
 fi
 
 
@@ -1340,6 +1434,8 @@ AC_CHECK_HEADERS(
         libgen.h \
         locale.h \
         errno.h \
+        arpa/tftp.h \
+        sys/filio.h \
         setjmp.h,
 dnl to do if not found
 [],
@@ -1408,6 +1504,13 @@ dnl Checks for library functions.
 dnl AC_PROG_GCC_TRADITIONAL
 AC_TYPE_SIGNAL
 dnl AC_FUNC_VPRINTF
+case $host in
+  *msdosdjgpp)
+     ac_cv_func_pipe=no
+     skipcheck_pipe=yes
+     AC_MSG_NOTICE([skip check for pipe on msdosdjgpp])
+    ;;
+esac
 AC_CHECK_FUNCS( strtoll \
                 socket \
                 select \
@@ -1445,7 +1548,9 @@ AC_CHECK_FUNCS( strtoll \
 dnl if found
 [],
 dnl if not found, $ac_func is the name we check for
-  func="$ac_func"
+func="$ac_func"
+eval skipcheck=\$skipcheck_$func
+if test "x$skipcheck" != "xyes"; then
   AC_MSG_CHECKING([deeper for $func])
   AC_TRY_LINK( [],
                [ $func ();],
@@ -1455,7 +1560,7 @@ dnl if not found, $ac_func is the name we check for
                AC_DEFINE_UNQUOTED($def, 1, [If you have $func]),
                AC_MSG_RESULT(but still no)
                )
-
+fi
 )
 
 dnl For some reason, the check above doesn't properly detect select() with
@@ -1493,6 +1598,19 @@ AC_CHECK_DECL(basename, ,
 #ifdef HAVE_LIBGEN_H
 #include <libgen.h>
 #endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+)
+
+AC_CHECK_DECL(inet_pton, ,
+              AC_DEFINE(HAVE_NO_INET_PTON_PROTO, 1,
+                        [Defined if no inet_pton() prototype available]),
+[
+#ifdef HAVE_ARPA_INET_H
+#include <arpa/inet.h>
+#endif
+]
 )
 
 AC_MSG_CHECKING([if we are Mac OS X (to disable poll)])
@@ -1594,7 +1712,7 @@ AC_HELP_STRING([--disable-ares],[Disable ares for name lookups]),
   *)   AC_MSG_RESULT(yes)
 
        if test "x$IPV6_ENABLED" = "x1"; then
-         AC_MSG_ERROR([ares doesn't work with ipv6, disable ipv6 to use ares])
+         AC_MSG_NOTICE([ares may not work properly with ipv6])
        fi
 
        AC_DEFINE(USE_ARES, 1, [Define if you want to enable ares support])
@@ -1603,7 +1721,7 @@ AC_HELP_STRING([--disable-ares],[Disable ares for name lookups]),
        AC_SUBST(HAVE_ARES)
        curl_ares_msg="enabled"
 
-       LIBS="$LIBS -lcares"
+       LIBS="-lcares $LIBS"
 
        dnl For backwards compatibility default to includes/lib in srcdir/ares
        dnl If a value is specified it is assumed that the libs are in $val/lib
@@ -1688,7 +1806,6 @@ AC_HELP_STRING([--disable-sspi],[Disable SSPI]),
        AC_MSG_RESULT(yes)
        AC_DEFINE(USE_WINDOWS_SSPI, 1, [to enable SSPI support])
        AC_SUBST(USE_WINDOWS_SSPI)
-       LIBS="$LIBS -lsecur32"
        curl_sspi_msg="yes"
        ;;
   *)

curl-config.in

@@ -60,7 +60,9 @@ while test $# -gt 0; do
     --feature|--features)
 	if test "@USE_SSLEAY@" = "1"; then
           echo "SSL"
-          NTLM=1
+          NTLM=1 # OpenSSL implies NTLM
+        elif test -n "@USE_GNUTLS@"; then
+          echo "SSL"
         fi
 	if test "@KRB4_ENABLED@" = "1"; then
           echo "KRB4"
@@ -114,6 +116,9 @@ while test $# -gt 0; do
 	if test "@CURL_DISABLE_DICT@" != "1"; then
           echo "DICT"
         fi
+	if test "@CURL_DISABLE_TFTP@" != "1"; then
+          echo "TFTP"
+        fi
 	;;
     --version)
 	echo libcurl @VERSION@

docs/BINDINGS

@@ -82,8 +82,8 @@ Lisp
 
 Lua
 
-  Written by Steve Dekorte
-  http://curl.haxx.se/libcurl/lua/
+  LuaCURL Written by Alexander Marinov
+  http://luacurl.luaforge.net/
 
 Mono
 
@@ -150,6 +150,11 @@ Scheme
   Bigloo binding written by Kirill Lisovsky
   http://curl.haxx.se/libcurl/scheme/
 
+S-Lang
+
+  S-Lang binding written by John E Davis
+  http://www.jedsoft.org/slang/modules/curl.html
+
 Tcl
 
   Tclcurl is written by Andr<64>s Garc<72>a
@@ -161,7 +166,7 @@ Visual Basic
   http://sourceforge.net/projects/libcurl-vb/
 
 Q
-
+  The libcurl module is part of the default install
   http://q-lang.sourceforge.net/
 
 wxWidgets

docs/CONTRIBUTE

@@ -4,11 +4,11 @@
                             | (__| |_| |  _ <| |___
                              \___|\___/|_| \_\_____|
 
-To Think About When Contributing Source Code
+                        When Contributing Source Code
 
- This document is intended to offer some simple guidelines that can be useful
- to keep in mind when you decide to contribute to the project. This concerns
- new features as well as corrections to existing flaws or bugs.
+ This document is intended to offer guidelines that can be useful to keep in
+ mind when you decide to contribute to the project. This concerns new features
+ as well as corrections to existing flaws or bugs.
 
 Join the Community
 
@@ -20,13 +20,26 @@ Join the Community
 The License Issue
 
  When contributing with code, you agree to put your changes and new code under
- the same license curl and libcurl is already using unless stated otherwise.
+ the same license curl and libcurl is already using unless stated and agreed
+ otherwise.
 
  If you add a larger piece of code, you can opt to make that file or set of
  files to use a different license as long as they don't enforce any changes to
  the rest of the package and they make sense. Such "separate parts" can not be
- GPL (as we don't want the GPL virus to attack users of libcurl) but they must
- use "GPL compatible" licenses.
+ GPL licensed (as we don't want copyleft to affect users of libcurl) but they
+ must use "GPL compatible" licenses (as we want to allow users to use libcurl
+ properly in GPL licensed environments).
+
+ When changing existing source code, you do not alter the copyright of the
+ original file(s). The copyright will still be owned by the original
+ creator(s) or those who have been assigned copyright by the original
+ author(s).
+
+ By submitting a patch to the curl project, you are assumed to have the right
+ to the code and to be allowed by your employer or whatever to hand over that
+ patch/code to us. We will credit you for your changes as far as possible, to
+ give credit but also to keep a trace back to who made what changes. Please
+ always provide us with your full real name when contributing!
 
 What To Read
 

docs/DISTRO-DILEMMA

@@ -0,0 +1,226 @@
+  Date: October 27, 2005
+  Author: Daniel Stenberg <daniel@haxx.se>
+  URL: http://curl.haxx.se/legal/distro-dilemma.html
+
+Condition
+
+ This document is written to describe the situation as it is right
+ now. libcurl 7.15.0 is currently the latest version available. Things may (or
+ perhaps will) of course change in the future.
+
+ This document reflects my view and understanding of these things. Please tell
+ me where and how you think I'm wrong, and I'll try to correct my mistakes.
+
+Background 
+
+ The Free Software Foundation has deemed the Original BSD license[1] to be
+ "incompatible"[2] with GPL[3]. I'd rather say it is the other way around, but
+ the point is the same: if you distribute a binary version of a GPL program,
+ it MUST NOT be linked with any Original BSD-licensed parts or
+ libraries. Doing so will violate the GPL license. For a long time, very many
+ GPL licensed programs have avoided this license mess by adding an
+ exception[8] to their license. And many others have just closed their eyes
+ for this problem.
+
+ libcurl is MIT-style[4] licensed - how on earth did this dilemma fall onto
+ our plates?
+
+ libcurl is only a little library. libcurl can be built to use OpenSSL for its
+ SSL/TLS capabilities. OpenSSL is basically Original BSD licensed[5].
+
+ If libcurl built to use OpenSSL is used by a GPL-licensed application and you
+ decide to distribute a binary version of it (Linux distros - for example -
+ tend to), you have a clash. GPL vs Original BSD.
+
+ This dilemma is not libcurl-specific nor is it specific to any particular
+ Linux distro. (This article mentions and refers to Debian several times, but
+ only because Debian seems to be the only Linux distro to have faced this
+ issue yet since no other distro is shipping libcurl built with two SSL
+ libraries.)
+
+Part of the Operating System
+
+ This would not be a problem if the used lib would be considered part of the
+ underlying operating system, as then the GPL license has an exception
+ clause[6] that allows applications to use such libs without having to be
+ allowed to distribute it or its sources. Possibly some distros will claim
+ that OpenSSL is part of their operating system.
+
+ Debian does however not take this stance and has officially(?) claimed that
+ OpenSSL is not a required part of the Debian operating system
+
+Debian-legal
+
+ In August 2004 I figured I should start pulling people's attention to this to
+ see if anyone has any bright ideas or if they would dismiss my worries based
+ on some elegant writing I had missed somewhere:
+
+ My post to debian-legal on August 12 2004:
+
+        http://lists.debian.org/debian-legal/2004/08/msg00279.html
+
+ Several people agreed then that this is a known and rather big problem, but
+ the following discussion didn't result in much.
+
+GnuTLS
+
+ With the release of libcurl 7.14.0 (May 2005), it can now get built to use
+ GnuTLS instead of OpenSSL. GnuTLS is a LGPL[7] licensed library that offers a
+ matching set of features as OpenSSL does. Now, you can build and distribute
+ an SSL capable libcurl without including any Original BSD licensed code.
+
+ I believe Debian is the first distro to provide libcurl/GnutTLS packages.
+
+GnuTLS vs OpenSSL
+
+ While these two libraries offer similar features, they are not equal. Both
+ libraries have features the other one lacks. libcurl does not (yet) offer a
+ standardized stable ABI if you decide to switch from using libcurl-openssl to
+ libcurl-gnutls or vice versa. The GnuTLS support is very recent in libcurl
+ and it has not been tested nor used very extensively, while the OpenSSL
+ equivalent code has been used and thus matured for more than seven (7) years.
+
+ In August 2005, the debian-devel mailing list discovered the license issue as
+ a GPL licensed application wanted SSL capabilities from libcurl and thus was
+ forced to use the GnuTLS powered libcurl. For a reason that is unknown to me,
+ the application authors didn't want to or was unable to add an exception to
+ their GPL license. Alas, the license problem hit the fan again.
+
+ GnuTLS
+   - LGPL licensened
+   - supports SRP
+   - lacks SSLv2 support
+   - lacks MD2 support (used by at least some CA certs)
+
+ OpenSSL
+   - Original BSD licensened
+   - lacks SRP
+   - supports SSLv2
+   - older and more widely used
+
+The Better License, Original BSD or LGPL?
+
+ It isn't obvious or without debate to any objective interested party that
+ either of these licenses are the "better" or even the "preferred" one in a
+ generic situation.
+
+ Instead, I think we should accept the fact that the SSL/TLS libraries and
+ their different licenses will fit different applications and their authors
+ differently depending on the applications' licenses and their general usage
+ pattern (considering how LGPL libraries for example can be burdensome for
+ embedded systems usage).
+
+ In Debian land, there seems to be a common opinion that LGPL is "maximally
+ compatible" with apps while Original BSD is not. Like this:
+
+        http://lists.debian.org/debian-devel/2005/09/msg01417.html
+
+More SSL Libraries
+
+ In libcurl, there's no stopping us here. There are at least a few more Open
+ Source/Free SSL/TLS libraries and we would very much like to support them as
+ well, to offer application authors an even wider scope of choice.
+
+Application Angle of this Problem
+
+ libcurl is built to use one SSL/TLS library. It uses a single fixed name (by
+ default), and applications are built/linked to use that single lib. Replacing
+ one libcurl instance with another one that uses the other SSL/TLS library
+ might break one or more applications (due to ABI differences and/or different
+ feature set). You want your application to use the libcurl it was built for.
+
+Project cURL Angle of this Problem
+
+ We distribute libcurl and everyone may build libcurl with either library. At
+ their choice. This problem is not directly a problem of ours. It merely
+ affects users - GPL application authors only - of our lib as it comes
+ included and delivered on some distros.
+
+ libcurl has different ABI when built with different SSL/TLS libraries due to
+ two reasons:
+
+ 1. No one has worked on fixing this. The mutex/lock callbacks should be set
+    with a generic libcurl function that should use the proper underlying
+    functions.
+
+ 2. The CURLOPT_SSL_CTX_FUNCTION option is not possible to "emulate" on GnuTLS
+    but simply requires OpenSSL.
+
+Distro Angle of this Problem
+
+ A distro can provide separate libcurls built with different SSL/TLS libraries
+ to work around this, but at least Debian seems to be very hostile against
+ such an approach, probably since it makes things like devel packages for the
+ different libs collide since they would provide the same include files and
+ man pages etc.
+
+Fixing the Only Problem
+
+ The only problem is thus for distributions that want to offer libcurl
+ versions built with more than one SSL/TLS library.
+
+ Debian is now (since mid September 2005) providing two different devel
+ packages, one for libcurl built with OpenSSL and one built with GnuTLS. They
+ use different .so names and can this both be installed in a single system
+ simultaneously. This has previously been said as a transitional system not
+ desired to keep in the long run.
+
+ Since multiple libcurl binaries using different names are ruled out, we need
+ to come up with a way to have one single libcurl that someone uses different
+ underlying libraries. The best(?) approach currently suggested involves this:
+
+ A new intermediate library (named lib2 so far in the discussions) with the
+ single purpose of providing libcurl with SSL/TLS capabilities. It would have
+ a unified API and ABI no matter what underlying library it would use.
+
+ There would be one lib2 binary provided for each supported SSL/TLS library.
+ For example: lib2-openssl, lib2-gnutls, lib2-yassl, lib2-matrixssl and
+ lib2-nossl. Yes, take note of the last one that provides the lib2 ABI but
+ that lacks the actual powers.
+
+ When libcurl is built and linked, it will be linked against a lib2 with the
+ set ABI.
+
+ When you link an app against libcurl, it would also need to provide one of
+ the (many) lib2 libs to decide what approach that fits the app. An app that
+ doesn't want SSL at all would still need to link with the lib2-nossl lib.
+
+ GPL apps can pick the lib2-gnutls, others may pick the lib2-openssl.
+
+ This concept works equally well both for shared and static libraries.
+
+ A positive side effect of this approach could be a more generic "de facto"
+ standard API for SSL/TLS libraries.
+
+When Will This Happen
+
+ Note again that this is not a problem in curl, it doesn't solve any actual
+ technical problems in our project. Don't hold your breath for this to happen
+ very soon (if at all) unless you step forward and contribute.
+
+ The suggestion that is outlined above is still only a suggestion. Feel free
+ to bring a better idea!
+
+ Also, to keep in mind: I don't want this new concept to have too much of an
+ impact on the existing code. Preferably it should be possible to build the
+ code like today (without the use of lib2), should you decide to ignore the
+ problems outlined in this document.
+
+ Update: Work on this has been initiated by Richard Atterer:
+
+        http://curl.haxx.se/mail/lib-2005-09/0066.html
+
+Footnotes
+
+ [1] = http://www.xfree86.org/3.3.6/COPYRIGHT2.html#6
+ [2] = http://www.fsf.org/licensing/essays/bsd.html
+ [3] = http://www.fsf.org/licensing/licenses/gpl.html
+ [4] = http://curl.haxx.se/docs/copyright.html
+ [5] = http://www.openssl.org/source/license.html
+ [6] = http://www.fsf.org/licensing/licenses/gpl.html end of section 3
+ [7] = http://www.fsf.org/licensing/licenses/lgpl.html
+ [8] = http://en.wikipedia.org/wiki/OpenSSL_exception
+
+Feedback/Updates provided by
+
+ Eric Cooper

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: April 13, 2005 (http://curl.haxx.se/docs/faq.html)
+Updated: November 2, 2005 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _
                               ___| | | |  _ \| |
                              / __| | | | |_) | |
@@ -16,6 +16,8 @@ FAQ
   1.6 What do you get for making curl?
   1.7 What about CURL from curl.com?
   1.8 I have a problem who do I mail?
+  1.9 Where do I buy commercial support for curl?
+  1.10 How many are using curl?
 
  2. Install Related Problems
   2.1 configure doesn't find OpenSSL even when it is installed
@@ -64,6 +66,8 @@ FAQ
   4.10 My HTTP request using HEAD, PUT or DELETE doesn't work!
   4.11 Why does my HTTP range requests return the full document?
   4.12 Why do I get "certificate verify failed" ?
+  4.13 Why is curl -R on Windows one hour off?
+  4.14 Redirects work in browser but not with curl!
 
  5. libcurl Issues
   5.1 Is libcurl thread-safe?
@@ -86,6 +90,7 @@ FAQ
   6.4 I have a program that uses LGPL libraries, can I use libcurl?
   6.5 Can I modify curl/libcurl for my program and keep the changes secret?
   6.6 Can you please change the curl/libcurl license to XXXX?
+  6.7 What are my obligations when using libcurl in my commerical apps?
 
  7. PHP/CURL Issues
   7.1 What is PHP/CURL?
@@ -132,11 +137,11 @@ FAQ
 
   We pronounce curl and cURL with an initial k sound: [kurl].
 
-  NOTE: there are numerous sub-projects and related projects that also use the
-  word curl in the project names in various combinations, but you should take
+  There are numerous sub-projects and related projects that also use the word
+  curl in the project names in various combinations, but you should take
   notice that this FAQ is directed at the command-line tool named curl (and
   libcurl the library), and may therefore not be valid for other curl-related
-  projects.
+  projects. (There is however a small section for the PHP/CURL in this FAQ.)
 
   1.2 What is libcurl?
 
@@ -146,6 +151,10 @@ FAQ
   You can use libcurl for free in your application, be it open source,
   commercial or closed-source.
 
+  libcurl is most probably the most portable, most powerful and most often
+  used C-based multi-platform file transfer library on this planet - be it
+  open source or commercial.
+
   1.3 What is curl not?
 
   Curl is *not* a wget clone. That is a common misconception.  Never, during
@@ -197,15 +206,14 @@ FAQ
 
   1.5 Who makes curl?
 
-  curl and libcurl are not made by any single individual. Sure, Daniel
-  Stenberg writes the major parts, but other persons' submissions are
+  curl and libcurl are not made by any single individual. Daniel Stenberg is
+  project leader and main developer, but other persons' submissions are
   important and crucial. Anyone can contribute and post their changes and
   improvements and have them inserted in the main sources (of course on the
   condition that developers agree on that the fixes are good).
 
-  The list of contributors in the docs/THANKS file is only a small part of all
-  the people that every day provide us with bug reports, suggestions, ideas
-  and source code.
+  The full list of the more than 450 contributors is found in the docs/THANKS
+  file.
 
   curl is developed by a community, with Daniel at the wheel.
 
@@ -220,12 +228,8 @@ FAQ
   have sponsored certain parts of the development in the past and I hope some
   will continue to do so in the future.
 
-  If you want to support our project with a donation or similar, one way of
-  doing that would be to buy "gift certificates" at useful online shopping
-  sites, such as amazon.com or thinkgeek.com. Another way would be to sponsor
-  us through a banner-program or even better: by helping us coding,
-  documenting, testing etc. You're welcome to send us a buck using paypal, as
-  described here: http://curl.haxx.se/donation.html
+  If you want to support our project, consider a donation or a banner-program
+  or even better: by helping us coding, documenting, testing etc.
 
   1.7 What about CURL from curl.com?
 
@@ -256,6 +260,58 @@ FAQ
   users thanks to the web based archives of the mailing lists), thus saving us
   from having to repeat ourselves even more. Thanks for respecting this.
 
+  If you have found or simply suspect a security problem in curl or libcurl,
+  mail curl-security at haxx.se (closed list of receivers, mails are not
+  disclosed) and tell. Then we can produce a fix in a timely manner before the
+  flaw is announced to the world, thus lessen the impact the problem will have
+  on existing users.
+
+  1.9 Where do I buy commercial support for curl?
+
+  curl is fully open source. It means you can hire any skilled engineer to fix
+  your curl-related problems.
+
+  We list available alternatives on the curl web site:
+  http://curl.haxx.se/support.html
+
+  1.10 How many are using curl?
+
+  It is impossible to tell.
+
+  We don't know how many users that knowingly have installed and use curl.
+
+  We don't know how many users that use curl without knowing that they are in
+  fact using it.
+
+  We don't know how many users that downloaded or installed curl and then
+  never use it.
+
+  Some facts to use as input to the math:
+
+  curl packages have been downloaded from the curl.haxx.se site well over a
+  million times. curl is installed by default with most Linux
+  distributions. curl is installed by default with Mac OS X. curl and libcurl
+  as used by numerous applications that include libcurl binaries in their
+  distribution packages (like Adobe Acrobat Reader and Google Earth).
+
+  More than 40 known named companies use curl in commercial environments and
+  products. More than 100 known named open source projects depend on
+  (lib)curl.
+
+  In a poll on the curl web site mid-2005, more than 50% of the 300+ answers
+  estimated a user base of one million users or more.
+
+  In March 2005, the "Linux Counter project" estimated a total Linux user base
+  of some 29 millions, while Netcraft detected some 4 million "active" Linux
+  based web servers. A guess is that a fair amount of these Linux
+  installations have curl installed.
+
+  http://curl.haxx.se/docs/companies.html
+  http://curl.haxx.se/docs/programs.html
+  http://curl.haxx.se/libcurl/using/apps.html
+  http://counter.li.org/estimates.php
+  http://news.netcraft.com/archives/2005/03/14/fedora_makes_rapid_progress.html
+
 
 2. Install Related Problems
 
@@ -396,6 +452,8 @@ FAQ
 
      curl -L http://redirector.com
 
+  Not all redirects are HTTP ones, see 4.14
+
   3.9 How do I use curl in my favorite programming language?
 
   There exist many language interfaces/bindings for curl that integrates it
@@ -509,22 +567,24 @@ FAQ
   - Server certificate. The server you communicate with has a server
     certificate. You can and should verify this certificate to make sure that
     you are truly talking to the real server and not a server impersonating
-    it. The server certificate verification process is made by using a
-    Certificate Authority certificate ("CA cert") that was used to sign the
-    server certificate. Server certificate verification is enabled by default
-    in curl and libcurl and is often the reason for problems as explained in
-    FAQ entry 4.12 and the SSLCERTS document
-    (http://curl.haxx.se/docs/sslcerts.html). Server certificates that are
-    "self-signed" or otherwise signed by a CA that you do not have a CA cert
-    for, cannot be verified. If the verification during a connect fails, you
-    are refused access. You then need to explicitly disable the verification
-    to connect to the server.
+    it.
 
   - Certificate Authority certificate ("CA cert"). You often have several CA
     certs in a CA cert bundle that can be used to verify a server certificate
     that was signed by one of the authorities in the bundle. curl comes with a
     default CA cert bundle. You can override the default.
 
+    The server certificate verification process is made by using a Certificate
+    Authority certificate ("CA cert") that was used to sign the server
+    certificate. Server certificate verification is enabled by default in curl
+    and libcurl and is often the reason for problems as explained in FAQ entry
+    4.12 and the SSLCERTS document
+    (http://curl.haxx.se/docs/sslcerts.html). Server certificates that are
+    "self-signed" or otherwise signed by a CA that you do not have a CA cert
+    for, cannot be verified. If the verification during a connect fails, you
+    are refused access. You then need to explicitly disable the verification
+    to connect to the server.
+
   3.17 How do I list the root dir of an FTP server?
 
   There are two ways. The way defined in the RFC is to use an encoded slash
@@ -541,6 +601,8 @@ FAQ
  
   No.
 
+  But you could easily write your own program using libcurl to do such stunts.
+
 
 4. Running Problems
 
@@ -734,6 +796,28 @@ FAQ
   Details are also in the SSLCERTS file in the release archives, found online
   here: http://curl.haxx.se/docs/sslcerts.html
 
+  4.13 Why is curl -R on Windows one hour off?
+
+  During daylight savings time, when -R is used, curl will set a time that
+  appears one hour off. This happens due to a flaw in how Windows stores and
+  uses file modification times and it is not easily worked around. For details
+  on this problem, read this: http://www.codeproject.com/datetime/dstbugs.asp
+
+  4.14 Redirects work in browser but not with curl!
+
+  curl supports HTTP redirects fine (see item 3.8). Browsers generally support
+  at least two other ways to perform directs that curl does not:
+
+  - Meta tags. You can write a HTML tag that will cause the browser to
+    redirect to another given URL after a certain time.
+
+  - Javascript. You can write a javascript program embeded in a HTML page
+    that redirects the browser to another given URL.
+
+  There is no way to make curl follow these redirects. You must either
+  manually figure out what the page is set to do, or you write a script that
+  parses the results and fetches the new URL.
+
 
 5. libcurl Issues
 
@@ -754,7 +838,7 @@ FAQ
   need to provide locking function(s) for libgcrypt (which is used by GnuTLS
   for the crypto functions).
 
-    [informative link missing]
+    http://www.gnu.org/software/gnutls/manual/html_node/Multi_002dthreaded-applications.html
 
   5.2 How can I receive all data into a large memory chunk?
 
@@ -766,8 +850,8 @@ FAQ
 
   One solution to this problem could be to have a pointer to a struct that you
   pass to the callback function. You set the pointer using the
-  curl_easy_setopt(CURLOPT_FILE) function. Then that pointer will be passed to
-  the callback instead of a FILE * to a file:
+  CURLOPT_WRITEDATA option. Then that pointer will be passed to the callback
+  instead of a FILE * to a file:
 
         /* imaginary struct */
         struct MemoryStruct {
@@ -874,7 +958,10 @@ FAQ
 
   5.9 How does libcurl resolve host names?
 
-  libcurl includes a number of different name resolve functions:
+  libcurl supports a large a number of different name resolve functions. One
+  of them is picked at build-time and will be used unconditionally. Thus, if
+  you want to change name resolver function you must rebuild libcurl and tell
+  it to use a different function.
 
   - The non-ipv6 resolver that can use one out of four host name resolve calls
     (depending on what your system supports):
@@ -887,6 +974,8 @@ FAQ
   - The ipv6-resolver that uses getaddrinfo()
 
   - The c-ares based name resolver that uses the c-ares library for resolves.
+    Using this offers asynchronous name resolves but it currently has no IPv6
+    support.
 
   - The Windows threaded resolver. It use:
 
@@ -899,8 +988,8 @@ FAQ
   5.10 How do I prevent libcurl from writing the response to stdout?
 
   libcurl provides a default built-in write function that writes received data
-  to stdout. Set a WRITEFUNCTION to receive the data, or possibly set
-  WRITEDATA to a different FILE * handle.
+  to stdout. Set the CURLOPT_WRITEFUNCTION to receive the data, or possibly
+  set CURLOPT_WRITEDATA to a different FILE * handle.
 
   5.11 How do I make libcurl not receive the whole HTTP response?
 
@@ -929,6 +1018,9 @@ FAQ
   is just a brief summary for the cases we get the most questions. (Parts of
   this section was much enhanced by Bjorn Reese.)
 
+  We are not lawyers and this is not legal advice. You should probably consult
+  one if you want true and accurate legal insights without our prejudice.
+
   6.1 I have a GPL program, can I use the libcurl library?
 
   Yes!
@@ -973,13 +1065,38 @@ FAQ
   libraries that use it. It should be possible for everyone to use libcurl or
   curl in their projects, no matter what license they already have in use.
 
+  6.7 What are my obligations when using libcurl in my commerical apps?
+
+  Next to none. All you need to adhere to is the MIT-style license (stated in
+  the COPYING file) which basically says you have to include the copyright
+  notice in "all copies" and that you may not use the copyright holder's name
+  when promoting your software.
+
+  You do not have to release any of your source code.
+
+  You do not have to reveal or make public any changes to the libcurl source
+  code.
+
+  You do not have to reveal or make public that you are using libcurl within
+  your app.
+
+  As can be seen here: http://curl.haxx.se/docs/companies.html and
+  elsewhere, more and more companies are dicovering the power
+  of libcurl and take advantage of it even in commercial environments.
+
+
 7. PHP/CURL Issues
 
   7.1 What is PHP/CURL?
 
   The module for PHP that makes it possible for PHP programs to access curl-
-  functions from within PHP. We often call it PHP/CURL to differentiate from
-  curl the command line tool and libcurl the library.
+  functions from within PHP.
+
+  In the cURL project we call this module PHP/CURL to differentiate it from
+  curl the command line tool and libcurl the library. The PHP team however
+  does not refer to it like this (for unknown reasons). They call it plain
+  CURL (often using all caps) which causes much confusion to users which in
+  turn gives us a higher question load.
 
   7.2 Who write PHP/CURL?
 

docs/FEATURES

@@ -62,11 +62,11 @@ HTTP
 
 HTTPS (*1)
  - (all the HTTP features)
- - using certificates
+ - using client certificates
  - verify server certificate
  - via http-proxy
  - select desired encryption
- - force usage of a specific SSL version (SSLv2, SSLv3 or TLSv1)
+ - force usage of a specific SSL version (SSLv2(*7), SSLv3 or TLSv1)
 
 FTP
  - download
@@ -95,6 +95,9 @@ FTPS (*1)
  - implicit "AUTH TSL" and "AUTH SSL" usage to "upgrade" plain ftp://
    connection to use SSL for both or one of the connections
 
+TFTP
+ - download / upload
+
 TELNET
  - connection negotiation
  - custom telnet options
@@ -118,9 +121,10 @@ FILE
 FOOTNOTES
 =========
 
-  *1 = requires OpenSSL
+  *1 = requires OpenSSL or GnuTLS
   *2 = requires OpenLDAP
   *3 = requires a GSSAPI-compliant library, such as Heimdal or similar.
   *4 = requires FBopenssl
   *5 = requires a krb4 library, such as the MIT one or similar.
   *6 = requires c-ares
+  *7 = requires OpenSSL specificly, as GnuTLS only supports SSLv3 and TLSv1

docs/HISTORY

@@ -145,3 +145,9 @@ August 2004:
 April 2005:
 
 GnuTLS can now optionally be used for the secure layer when curl is built.
+
+September 2005:
+
+TFTP support was added.
+
+More than 100,000 unique visitors of the curl web site. 25 mirrors.

docs/INSTALL

@@ -132,172 +132,151 @@ UNIX
 Win32
 =====
 
-   Without SSL:
+   MingW32
+   -------
 
-      MingW32 (GCC-2.95) style
-      ------------------------
-        Run the 'mingw32.bat' file to get the proper environment variables
-        set, then run 'make mingw32' in the root dir.
+   Run the 'mingw32.bat' file to get the proper environment variables set,
+   then run 'make mingw32' in the root dir. Use  'make mingw32-ssl' to build
+   curl SSL enabled.
 
-        If you have any problems linking libraries or finding header files, be
-        sure to verify that the provided "Makefile.m32" files use the proper
-        paths, and adjust as necessary.
+   If you have any problems linking libraries or finding header files, be sure
+   to verify that the provided "Makefile.m32" files use the proper paths, and
+   adjust as necessary.
 
-      Cygwin style
-      ------------
-        Almost identical to the unix installation. Run the configure script in
-        the curl root with 'sh configure'. Make sure you have the sh
-        executable in /bin/ or you'll see the configure fail towards the end.
+   Cygwin
+   ------
 
-        Run 'make'
+   Almost identical to the unix installation. Run the configure script in the
+   curl root with 'sh configure'. Make sure you have the sh executable in
+   /bin/ or you'll see the configure fail towards the end.
 
-      Microsoft command line style
-      ----------------------------
-        Run the 'vcvars32.bat' file to get the proper environment variables
-        set, then run 'nmake vc' in the root dir.
+   Run 'make'
 
-        The vcvars32.bat file is part of the Microsoft development
-        environment.
+   Dev-Cpp
+   -------
 
-      IDE-style
-      -------------------------
-        If you use VC++, Borland or similar compilers. Include all lib source
-        files in a static lib "project" (all .c and .h files that is).
-        (you should name it libcurl or similar)
+   See the separate INSTALL.devcpp file for details.
 
-        Make the sources in the src/ drawer be a "win32 console application"
-        project. Name it curl.
+   MSVC from command line
+   ----------------------
 
-        For VC++ 6, there's an included Makefile.vc6 that should be possible
-        to use out-of-the-box.
+   Run the 'vcvars32.bat' file to get a proper environment. The
+   vcvars32.bat file is part of the Microsoft development environment and
+   you may find it in 'C:\Program Files\Microsoft Visual Studio\vc98\bin'
+   provided that you installed Visual C/C++ 6 in the default directory.
+
+   Then run 'nmake vc' in curl's root directory.
+
+   If you want to compile with zlib support, you will need to build
+   zlib (http://www.gzip.org/zlib/) as well. Please read the zlib
+   documentation on how to compile zlib. Define the ZLIB_PATH environment
+   variable to the location of zlib.h and zlib.lib, for example:
+
+     set ZLIB_PATH=c:\zlib-1.2.1
+
+   Then run 'nmake vc-zlib' in curl's root directory.
+
+   If you want to compile with SSL support you need the OpenSSL package.
+   Please read the OpenSSL documentation on how to compile and install
+   the OpenSSL libraries.  The build process of OpenSSL generates the
+   libeay32.dll and ssleay32.dll files in the out32dll subdirectory in
+   the OpenSSL home directory.  OpenSSL static libraries (libeay32.lib,
+   ssleay32.lib, RSAglue.lib) are created in the out32 subdirectory.
+
+   Before running nmake define the OPENSSL_PATH environment variable with
+   the root/base directory of OpenSSL, for example:
+
+     set OPENSSL_PATH=c:\openssl-0.9.7d
+
+   Then run 'nmake vc-ssl' or 'nmake vc-ssl-dll' in curl's root
+   directory.  'nmake vc-ssl' will create a libcurl static and dynamic
+   libraries in the lib subdirectory, as well as a statically linked
+   version of curl.exe in the src subdirectory.  This statically linked
+   version is a standalone executable not requiring any DLL at
+   runtime. This make method requires that you have the static OpenSSL
+   libraries available in OpenSSL's out32 subdirectory.
+   'nmake vc-ssl-dll' creates the libcurl dynamic library and
+   links curl.exe against libcurl and OpenSSL dynamically.
+   This executable requires libcurl.dll and the OpenSSL DLLs
+   at runtime.
+   Run 'nmake vc-ssl-zlib' to build with both ssl and zlib support.
+
+   Borland C++ compiler
+   ---------------------
+
+   compile openssl
+
+   Make sure you include the paths to curl/include and openssl/inc32 in
+   your bcc32.cnf file
+
+   eg : -I"c:\Bcc55\include;c:\path_curl\include;c:\path_openssl\inc32"
+
+   Check to make sure that all of the sources listed in lib/Makefile.b32
+   are present in the /path_to_curl/lib directory. (Check the src
+   directory for missing ones.)
+
+   Make sure the environment variable "BCCDIR" is set to the install
+   location for the compiler eg : c:\Borland\BCC55
+
+   command line:
+   make -f /path_to_curl/lib/Makefile-ssl.b32
+
+   compile simplessl.c with appropriate links
+
+   c:\curl\docs\examples\> bcc32 -L c:\path_to_curl\lib\libcurl.lib
+                                 -L c:\borland\bcc55\lib\psdk\ws2_32.lib
+                                 -L c:\openssl\out32\libeay32.lib
+                                 -L c:\openssl\out32\ssleay32.lib
+                                 simplessl.c
 
 
-   With SSL:
+   MSVC IDE
+   --------
 
-      MingW32 (GCC-2.95) style
-      ------------------------
-        Run the 'mingw32.bat' file to get the proper environment variables
-        set, then run 'make mingw32-ssl' in the root dir.
+   If you use VC++, Borland or similar compilers. Include all lib source
+   files in a static lib "project" (all .c and .h files that is).
+   (you should name it libcurl or similar)
 
-        If you have any problems linking libraries or finding header files, be
-        sure to look at the provided "Makefile.m32" files for the proper
-        paths, and adjust as necessary.
+   Make the sources in the src/ drawer be a "win32 console application"
+   project. Name it curl.
 
-      Cygwin style
-      ------------
-        Haven't done, nor got any reports on how to do. It should although be
-        identical to the unix setup for the same purpose. See above.
-
-      Microsoft command line style
-      ----------------------------
-
-        Run the 'vcvars32.bat' file to get a proper environment. The
-        vcvars32.bat file is part of the Microsoft development environment and
-        you may find it in 'C:\Program Files\Microsoft Visual Studio\vc98\bin'
-        provided that you installed Visual C/C++ 6 in the default directory.
-
-        Then run 'nmake vc' in curl's root directory.
-
-        If you want to compile with zlib support, you will need to build
-        zlib (http://www.gzip.org/zlib/) as well. Please read the zlib
-        documentation on how to compile zlib. Define the ZLIB_PATH environment
-        variable to the location of zlib.h and zlib.lib, for example:
-
-          set ZLIB_PATH=c:\zlib-1.2.1
-
-        Then run 'nmake vc-zlib' in curl's root directory.
-
-        If you want to compile with SSL support you need the OpenSSL package.
-        Please read the OpenSSL documentation on how to compile and install
-        the OpenSSL libraries.  The build process of OpenSSL generates the
-        libeay32.dll and ssleay32.dll files in the out32dll subdirectory in
-        the OpenSSL home directory.  OpenSSL static libraries (libeay32.lib,
-        ssleay32.lib, RSAglue.lib) are created in the out32 subdirectory.
-
-        Before running nmake define the OPENSSL_PATH environment variable with
-        the root/base directory of OpenSSL, for example:
-
-          set OPENSSL_PATH=c:\openssl-0.9.7d
-
-        Then run 'nmake vc-ssl' or 'nmake vc-ssl-dll' in curl's root
-        directory.  'nmake vc-ssl' will create a libcurl static and dynamic
-        libraries in the lib subdirectory, as well as a statically linked
-        version of curl.exe in the src subdirectory.  This statically linked
-        version is a standalone executable not requiring any DLL at
-        runtime. This make method requires that you have the static OpenSSL
-        libraries available in OpenSSL's out32 subdirectory.
-        'nmake vc-ssl-dll' creates the libcurl dynamic library and
-        links curl.exe against libcurl and OpenSSL dynamically.
-        This executable requires libcurl.dll and the OpenSSL DLLs
-        at runtime.
-        Run 'nmake vc-ssl-zlib' to build with both ssl and zlib support.
-
-      Microsoft / Borland style
-      -------------------------
-        If you have OpenSSL, and want curl to take advantage of it, edit your
-        project properties to use the SSL include path, link with the SSL libs
-        and define the USE_SSLEAY symbol.
-
-      Using Borland C++ compiler version 5.5.1 (available as free download
-      from Borland's site)
-      ---------------------------------------------------------------------
-
-        compile openssl
-
-        Make sure you include the paths to curl/include and openssl/inc32 in
-        your bcc32.cnf file
+   For VC++ 6, there's an included Makefile.vc6 that should be possible
+   to use out-of-the-box.
 
 
-        eg : -I"c:\Bcc55\include;c:\path_curl\include;c:\path_openssl\inc32"
+   Disabling Specific Protocols in Win32 builds
+   --------------------------------------------
 
-        Check to make sure that all of the sources listed in lib/Makefile.b32
-        are present in the /path_to_curl/lib directory. (Check the src
-        directory for missing ones.)
+   The configure utility, unfortunately, is not available for the Windows
+   environment, therefore, you cannot use the various disable-protocol
+   options of the configure utility on this platform.
 
-        Make sure the environment variable "BCCDIR" is set to the install
-        location for the compiler eg : c:\Borland\BCC55
+   However, you can use the following defines to disable specific
+   protocols:
 
-        command line:
-        make -f /path_to_curl/lib/Makefile-ssl.b32
+   HTTP_ONLY             disables all protocols except HTTP
+   CURL_DISABLE_FTP      disables FTP
+   CURL_DISABLE_LDAP     disables LDAP
+   CURL_DISABLE_TELNET   disables TELNET
+   CURL_DISABLE_DICT     disables DICT
+   CURL_DISABLE_FILE     disables FILE
+   CURL_DISABLE_GOPHER   disables GOPHER
 
-        compile simplessl.c with appropriate links
+   If you want to set any of these defines you have the following
+   possibilities:
 
-        c:\curl\docs\examples\> bcc32 -L c:\path_to_curl\lib\libcurl.lib
-                                      -L c:\borland\bcc55\lib\psdk\ws2_32.lib
-                                      -L c:\openssl\out32\libeay32.lib
-                                      -L c:\openssl\out32\ssleay32.lib
-                                      simplessl.c
-
-   Disabling Specific Protocols:
-
-      The configure utility, unfortunately, is not available for the Windows
-      environment, therefore, you cannot use the various disable-protocol
-      options of the configure utility on this platform.
-
-      However, you can use the following defines to disable specific
-      protocols:
-
-      HTTP_ONLY             disables all protocols except HTTP
-      CURL_DISABLE_FTP      disables FTP
-      CURL_DISABLE_LDAP     disables LDAP
-      CURL_DISABLE_TELNET   disables TELNET
-      CURL_DISABLE_DICT     disables DICT
-      CURL_DISABLE_FILE     disables FILE
-      CURL_DISABLE_GOPHER   disables GOPHER
-
-      If you want to set any of these defines you have the following
-      possibilities:
-
-      - Modify lib/setup.h
-      - Modify lib/Makefile.vc6
-      - Add defines to Project/Settings/C/C++/General/Preprocessor Definitions
-        in the curllib.dsw/curllib.dsp Visual C++ 6 IDE project.
+   - Modify lib/setup.h
+   - Modify lib/Makefile.vc6
+   - Add defines to Project/Settings/C/C++/General/Preprocessor Definitions
+     in the curllib.dsw/curllib.dsp Visual C++ 6 IDE project.
 
 
-   Important (with SSL or not):
-      When building an application that uses the static libcurl library, you
-      must add '-DCURL_STATICLIB' to your CFLAGS.  Otherwise the linker will
-      look for dynamic import symbols.
+   Important static libcurl usage note
+   -----------------------------------
+
+   When building an application that uses the static libcurl library, you must
+   add '-DCURL_STATICLIB' to your CFLAGS.  Otherwise the linker will look for
+   dynamic import symbols.
 
 
 IBM OS/2
@@ -462,21 +441,19 @@ NetWare
    - optional zlib sources (at the moment only dynamic linking with zlib.imp);
      sources with NetWare Makefile can be obtained from:
      http://www.gknw.com/mirror/zlib/
+   - optional OpenSSL sources (version 0.9.8 or later which builds with BSD);
 
-   Set a search path to your compiler, linker and tools; if you want to have
-   zlib support then set the environment var ZLIB_PATH pointing to your zlib
-   sources, on Linux make sure the var OSTYPE contains the string 'linux';
-   and finally type 'make netware' from the top source directory...
-   I found on some Linux systems (RH9) that OS detection didnlt work although
+   Set a search path to your compiler, linker and tools; on Linux make
+   sure that the var OSTYPE contains the string 'linux'; and then type
+   'make netware' from the top source directory; other tagets available
+   are 'netware-ssl', 'netware-ssl-zlib', 'netware-zlib' and 'netware-ares';
+   if you need other combinations you can control the build with the
+   environment variables WITH_SSL, WITH_ZLIB, WITH_ARES and ENABLE_IPV6.
+   I found on some Linux systems (RH9) that OS detection didnt work although
    a 'set | grep OSTYPE' shows the var present and set; I simply overwrote it
-   with 'OSTYPE=linux-rh9-gnu' and the detection in the Makefile worked...;
-   other options are currently not supported, although partly prepared.
-   The Ares lib builds arlready fine, and both test tools work fine at least
-   when build with CodeWarrior...; don't know yet why they fail when build with
-   gcc though; if you want to compile with Ares support then set an env var
-   WITH_ARES=1; I've not tested yet including libares into curl.
+   with 'OSTYPE=linux-rh9-gnu' and the detection in the Makefile worked...
    Any help in testing appreciated!
-   Builds automatically created 4 times a day from current CVS are here:
+   Builds automatically created 8 times a day from current CVS are here:
    http://www.gknw.com/mirror/curl/autobuilds/
    the status of these builds can be viewed at the autobuild table:
    http://curl.haxx.se/auto/
@@ -588,7 +565,7 @@ PORTS
         - Sparc Solaris 2.4, 2.5, 2.5.1, 2.6, 7, 8, 9, 10
         - Sparc SunOS 4.1.X
         - StrongARM (and other ARM) RISC OS 3.1, 4.02
-        - StrongARM Linux 2.4
+        - StrongARM/ARM7/ARM9 Linux 2.4, 2.6
         - StrongARM NetBSD 1.4.1
         - Ultrix 4.3a
         - i386 BeOS

docs/INSTALL.devcpp

@@ -0,0 +1,302 @@
+DevCpp-Mingw Install & Compilation                                   Sept 2005
+==================================
+
+Reference Emails available at curl@haxx.se: 
+
+  Libcurl Install and Use Issues
+  Awaiting an Answer for Win 32 Install 
+  res = curl_easy_perform(curl); Error
+  Makefile Issues
+  
+
+Having previously done a thorough review of what was available that met my
+requirements under GPL, I settled for Libcurl as the software of choice for
+many reasons not the least of which was the support.
+
+Background
+----------
+
+This quest started when I innocently tried to incorporate the libcurl library
+into my simple source code. I figured that a few easy steps would accomplish
+this without major headaches. I had no idea that I would be facing an almost
+insurmountable challenge.
+
+The main problem lies in two areas. First the bulk of support for libcurl
+exists for a Unix/linux command line environments. This is of little help when
+it comes to Windows O/S.
+
+Secondly the help that does exist for the Windows O/S focused around mingw
+thru a command line argument environment.
+
+You may ask "Why is this a problem?"
+
+I'm using a Windows O/S with DevCpp. For those of you who are unfamiliar with
+DevCpp, it is a window shell GUI that replaces the command line environment
+for gcc. A definite improvement that I am unwilling to give up. However using
+DevCpp presented its own set of issues. Inadvertently I also made some
+careless errors such as compiling the 7.14 version of Makefile with an older
+version of source code. Thanks to Dan Fandrich for picking this up.
+
+I did eventually with the help of Daniel, Phillipe and others manage to
+implement successfully (the only mingw available version)
+curl-7.13.0-win32-ssl-devel-mingw32 into the DevCpp environment. Only the
+dynamic libcurl.dll libcurldll.a libraries worked. The static library which I
+was interested in did not. Furthermore when I tried to implement one of the
+examples included with the curl package (get info.c) it caused the executable
+to crash. Tracing the bug I found it in the code and function res =
+curl_easy_perform(curl);.
+
+At this point I had to make a choice as to whether invest my limited
+time-energy resource to fixing the bug or to compile the new version
+available. After searching the archives I found a very similar or the same bug
+reported from version 7.12x on. Daniel did inform me that he thought that this
+bug had been fixed with the latest version. So I proceeded to compile the
+latest SSL version where I faced other challenges.
+
+In order to make this process unremarkable for others using the same
+environment I decided to document the process so that others will find it
+routine. It would be a shame if newbies could not implement this excellent
+package for their use.
+
+I would like to thank the many others in this forum and in the DevCpp forum
+for their help. Without your help I may either have given up or it would have
+taken me many times longer to achieve success.
+
+The Cookbook Approach
+---------------------
+
+This discussion will be confined to a SSL static library compilation and
+installation. Limited mention and comments will be inserted where appropriate
+to help with non-SSL, dynamic libraries and executables.
+
+
+   Using Makefile from DevCpp to compile Libcurl libraries
+
+Preamble
+--------
+
+Using the latest version release - curl-7.14.0.tar.gz. Curl source code is
+platform independent. This simply means that the source code can be compiled
+for any Operating System (Linux/Unix Windows etc. and variations of thereof).
+
+The first thing to note is that inside curl-7.14.0 you will find two folders
+lib and src. Both contain Makefile.m32 (required for win mingw library or exe
+compilation) files which are different. The main difference between these two
+folders and the makefiles is that the src folder contents are used to compile
+an executable file(curl.exe) while the lib folder contents are used to compile
+a static (libcurl.a) and dynamic (libcurl.dll & libcurldll.a) file that can be
+used to compile libcurl with your own source code so that one can use and
+access all libcurl functions.
+
+Before we start please make sure that DevCpp is installed properly. In
+particular make sure you have no spaces in the name of any of the directories
+and subdirectories where DevCpp is installed. Failure to comply with the
+install instructions may produce erratic behaviour in DevCpp. For further info
+check the following sites
+
+http://aditsu.freeunixhost.com/dev-cpp-faq.html
+http://sourceforge.net/forum/message.php?msg_id=3252213
+
+As I have mentioned before I will confine this to the SSL Library compilations
+but the process is very similar for compilation of the executable - curl.exe;
+just substitute the src folder makefile in its stead.
+
+First use a text processor Notepad, or your own favourite text processor. To
+engage your favourite text processor, select Makefile.m32 click once with your
+mouse on file icon; icon turns blue, press the shift key and right-click on
+mouse, menu appears select "Open with", select your favourite text processor.
+
+Next read the contents of Makefile.m32. It includes instructions on its use.
+
+Method I - DOS Command Line
+---------------------------
+ 
+Note - The only reason I have included this method is that Method II which is
+the preferred method for compiling does not allow for the setting of option
+switches (e.g. SSL = 1 or SSL =0). At least that's what they tell me at the
+Dev-Cpp forum.
+
+1 - Make a copy of (D:\Dev-Cpp\bin) bin folder and name it "bin Original"
+place it in the Dev-Cpp installed directory (D:\Dev-Cpp\ for this example)
+
+2 - Copy the entire contents of the LIB folder of curl-7.14.0.tar.gz or zip
+version into the bin folder above (D:\Dev-Cpp\bin). The reason being is that
+the make.exe file resides in this folder. Make.exe will use - Makefile.m32,
+Makefile.inc, and the source code included in the lib folder to compile the
+source code. There is a PATH issue with make.exe that remains unresolved at
+least for me. Unless the entire source code to be compiled is placed entirely
+within the directory of make.exe an error message will be generated - "file
+xxxx.yyy not available".
+
+3- Go to Dev-Cpp\bin and double click on make .exe. You will see a DOS window
+quickly pop up and close very quickly. Not to worry! Please do not skip this
+step.
+
+4- Click on the start button\Programs\MS-DOS Prompt.Once the DOS Window is up
+Type the disk drive letter (e.g. E: ) engage the enter button. The path should
+automatically take you to the directory of the make.exe file.
+
+5- To compile the source code simply type at the DOS prompt make -f
+Makefile.m32 as per instructions contained in the Makefile.m32 file (use any
+text processor to read instructions). I don't believe that this makefile
+allows for the option of non SSL. Ignore any warnings.
+
+6- Collect and make copies of libcurl.a, libcurl.dll, libcurldll.a and any *.o
+compilations you might need in another directory outside of the bin directory
+as you will need this files shortly to set up libcurl for use with
+Dev-cpp. For most apps *.o is not required. Later on we will show what to do
+with these files.
+
+7- You are finished but before closing we need to do cleanup - erase the bin
+folder and rename the "bin Original" folder created in step 1 to bin.
+
+Note to compile a curl executable the process is probably similar but instead
+of using the LIB folder contents use the SRC folder contents and Makefiles in
+curl-7.14.0.tar.gz. File directories relative placements must be respected for
+compiling to take place successfully. This may not be possible with the PATH
+problem that make.exe experiences. If anyone has solved this PATH issue and
+please make sure it actually works on Win 9x/2000/XP before letting me
+know. Then please let me or Daniel in on the solution so that it can be
+included with these instructions. Thanks.
+
+or
+
+Method II - Dev-Cpp GUI
+-----------------------
+
+1- Copy the entire contents of the LIB folder of curl-7.14.0.tar.gz or zip
+version into any folder outside of (Dev-Cpp\bin).
+
+2- Drop the File/New/click on Project.
+
+3- New Project Dialogue box appears. Double click on the Static Library.
+
+4- Create Project Dialogue box appears. Select the LIB folder location to
+place and locate your Project File Name. Placing the Project File Name
+elsewhere may cause problems (PATH issue problem again).
+
+5- Drop down the Project/Project Options. Project Options Dialogue box
+appears.
+
+6- Select the Makefile tab in the Project Options Dialogue Box. Check Box -
+Use Custom Makefile. Click on the Folder icon at the extreme right of the
+Check Box. Select Makefile.m32 in the folder wherever you have placed the
+contents of the LIB Folder. Press OK and close the Dialogue Box.
+
+7- Drop the Menu Project/Click on Add to Project. Open File Dialogue Box
+appears.  The Dialogue Box should open in the folder wherever you have placed
+the contents of the LIB Folder. If not go there.
+
+8- Select Crtl-A to select all files in the LIB folder. Click on open to add
+files and close box. Wait till all files are added. This may take 30 seconds
+or longer.
+
+9- Drop the Menu Execute/Click on Compile. 
+
+10- That's it.
+
+
+   The following steps must be completed if Curl is to work properly
+   =================================================================
+
+LIB folder inclusions (*.a placement)
+-------------------------------------
+
+1- Refer to Method I - DOS Command Line point # 6 Take libcurl.a, libcurldll.a
+and install it in the directory C( or whichever drive Dev is installed)
+:\Dev-Cpp\lib.
+
+
+Include Folder
+--------------
+
+1- Create a new folder by the name of curl (do not change the name curl to
+some other name as it will cause major issues) in the directory
+C:\Dev-Cpp\include.
+
+2- Copy the entire contents of the curl folder of curl-7.14.0.tar.gz or zip
+ version into the newly created curl directory - C:\Dev-Cpp\include\curl.
+
+Links To Include And Lib Folder
+-------------------------------
+
+1- Drop the Menu - Tools\Compiler Options\Directories\Libraries. Make sure
+that C( or whichever drive Dev is installed):\DEV-CPP\lib is included.
+
+2- Next select the Menu - Tools\Compiler Options\Directories\C Includes. Make
+sure that C:\DEV-CPP\include and C:\Dev-Cpp\include\curl are included.
+
+3- Next select the Menu - Tools\Compiler Options\Directories\C++
+Includes. Make sure that C:\DEV-CPP\include and C:\Dev-Cpp\include\curl are
+included.
+
+Linker Links
+------------
+
+1- Drop the Menu - Tools\Compiler Options\Directories\Compiler.
+
+2- Make sure that the box "Add these commands to the linker command line" is
+checked.
+
+3- Include in the white space immediately below the box referred in 2 -lcurl
+-lws2_32 -lwinmm.
+
+SSL Files
+---------
+
+1- Get the latest openSSL (as of time of this writing)
+openssl-0.9.7e-win32-bin.zip for the minimalist package of the openssl-0.9.7e
+binaries ported to MS Windows 95/98/NT/XP using the MingW32/GCC-3.1
+development environment. The file may be downloaded at
+http://curl.haxx.se/download/.
+
+2- Open the above zip file. You will find two files - SDL.dll,
+SDL_mixer.dll. Install them in the directory C:\WINDOWS\SYSTEM32 for Win 9x
+users and c:\winnt\system32 for NT-family users.
+
+Multithreading Files
+--------------------
+
+To be completed
+
+#define
+-------
+
+1- Make sure that your program includes the following - #define CURL_STATICLIB
+must be declared FIRST before any other define functions may be
+added. Otherwise you may experience link errors.
+
+2- Don't forget to include   #include "curl/curl.h".
+
+e.g.
+    #define CURL_STATICLIB 
+#include <windows.h>
+    #include "curl/curl.h"
+#include <fstream>
+#include <iostream>
+#include <vector>
+etc...
+
+
+Static or Dynamic Library
+-------------------------
+
+The above steps apply for the use by a static library. Should you choose to
+use a dynamic library you will be required to perform these additional steps.
+
+1- Refer to Method I - DOS Command Line point # 6. Install libcurl.dll in the
+directory C:\WINDOWS\SYSTEM32 for Win 9x users and c:\winnt\system32 for
+NT-family users.
+
+2- Refer to Linker Links point 3 - Replace -lcurl with -lcurldll.
+
+Voila you're done.
+
+The non-SSL static Library build may not be possible to use at least as of the
+time of this writing - v7.14. Check reference emails - Phillipe and I found it
+impossible to fully compile as certain files were missing for linking. No big
+loss as SSL is a major plus.
+
+Hope this Helps
+
+Tom

docs/KNOWN_BUGS

@@ -3,11 +3,33 @@ join in and help us correct one or more of these! Also be sure to check the
 changelog of the current development status, as one or more of these problems
 may have been fixed since this was written!
 
+28. The TFTP code is not portable and will fail on some architectures.
+
+26. NTLM authentication using SSPI (on Windows) when (lib)curl is running in
+  "system context" will make it use wrong(?) user name - at least when compared
+  to what winhttp does. See http://curl.haxx.se/bug/view.cgi?id=1281867
+
+25. When doing a CONNECT request with curl it doesn't properly handle if the
+  proxy closes the connection within the authentication "negotiation phase".
+  Like if you do HTTPS or similar over a proxy and you use perhaps
+  --proxy-anyauth. There's work in progress on this problem, and a recent
+  patch was posted here: http://curl.haxx.se/mail/lib-2005-08/0074.html
+
+24. Harshal Pradhan's Use-after-free with libcurl+ares. This probably occurs
+  because there is a pending ares callback that gets called after the
+  connection struct has been freed in libcurl:
+        http://curl.haxx.se/mail/lib-2005-08/0022.html
+  Fixing this properly most likely requires a new c-ares function.
+
+23. We don't support SOCKS for IPv6. We don't support FTPS over a SOCKS proxy.
+  We don't have any test cases for SOCKS proxy. We probably have even more
+  bugs and lack of features when a SOCKS proxy is used.
+
 22. Sending files to a FTP server using curl on VMS, might lead to curl
   complaining on "unaligned file size" on completion. The problem is related
   to VMS file structures and the perceived file sizes stat() returns. A
   possible fix would involve sending a "STRU VMS" command.
-  http://sourceforge.net/support/tracker.php?aid=1156287
+  http://curl.haxx.se/bug/view.cgi?id=1156287
   
 21. FTP ASCII transfers do not follow RFC959. They don't convert the data
    accordingly (not for sending nor for receiving). RFC 959 section 3.1.1.1
@@ -18,14 +40,6 @@ may have been fixed since this was written!
      specification).  The receiver will convert the data from the standard
      form to his own internal form.
 
-20. valgrind errors occur too often when 'make test' is used. It is because
-  too many third-party libs and tools have problems. When curl is built
-  without --disable-shared, the testing is done with a front-end script which
-  makes the valgrind testing include (ba)sh as well and that often causes
-  valgrind errors. Either we improve the valgrind error scanner a lot to
-  better identify (lib)curl errors only, or we disable valgrind checking by
-  default.
-
 19. FTP 3rd party transfers with the multi interface doesn't work. Test:
   define CURL_MULTIEASY, rebuild curl, run test case 230 - 232.
 
@@ -42,10 +56,6 @@ may have been fixed since this was written!
   would not meaningfully support NUL characters within RFC 959 <string>,
   anyway (e.g., UNIX pathnames may not contain NUL).
 
-15. Test case 241 fails on all systems that support IPv6 but that don't have
-  the host name 'ip6-localhost' in /etc/hosts (or similar) since the test case
-  uses that host name to test the IPv6 name to address resolver.
-
 14. Test case 165 might fail on system which has libidn present, but with an
   old iconv version (2.1.3 is a known bad version), since it doesn't recognize
   the charset when named ISO8859-1. Changing the name to ISO-8859-1 makes the
@@ -65,11 +75,12 @@ may have been fixed since this was written!
 10. To get HTTP Negotiate authentication to work fine, you need to provide a
   (fake) user name (this concerns both curl and the lib) because the code
   wrongly only considers authentication if there's a user name provided.
-  Bug report #1004841. How? http://curl.haxx.se/mail/lib-2004-08/0182.html
+  http://curl.haxx.se/bug/view.cgi?id=1004841. How?
+  http://curl.haxx.se/mail/lib-2004-08/0182.html
 
 9. --limit-rate using -d or -F does not work. This is because the limit logic
   is provided by the curl app in its read/write callbacks, and when doing
-  -d/-F the callbacks aren't used! Bug report #921395.
+  -d/-F the callbacks aren't used! http://curl.haxx.se/bug/view.cgi?id=921395
 
 8. Doing resumed upload over HTTP does not work with '-C -', because curl
   doesn't do a HEAD first to get the initial size. This needs to be done

docs/LICENSE-MIXING

@@ -12,12 +12,11 @@ I am not a lawyer and this is not legal advice!
 
 One common dilemma is that GPL[1]-licensed code is not allowed to be linked
 with code licensed under the Original BSD license (with the announcement
-clause, unless there's a specified exception in the GPL-licensed module). You
-may still build your own copies that use them all, but distributing them as
-binaries would be to violate the GPL license - unless you accompany your
-license with an exception[2]. This particular problem was addressed when the
-Modified BSD license was created, which does not have the annoncement clause
-that collides with GPL.
+clause). You may still build your own copies that use them all, but
+distributing them as binaries would be to violate the GPL license - unless you
+accompany your license with an exception[2]. This particular problem was
+addressed when the Modified BSD license was created, which does not have the
+annoncement clause that collides with GPL.
 
 libcurl http://curl.haxx.se/docs/copyright.html
 
@@ -28,29 +27,30 @@ libcurl http://curl.haxx.se/docs/copyright.html
 
 OpenSSL http://www.openssl.org/source/license.html
 
-        Uses an Original BSD-style license with an announement clause that
-        makes it "incompatible" with GPL. You are not allowed to ship binaries
-        that link with OpenSSL that includes GPL code (unless that specific
-        GPL code includes an exception for OpenSSL - a habit that is growing
-        more and more common). If OpenSSL's licensing is a problem for you,
-        consider using GnuTLS instead.
+        (May be used for SSL/TLS support) Uses an Original BSD-style license
+        with an announement clause that makes it "incompatible" with GPL. You
+        are not allowed to ship binaries that link with OpenSSL that includes
+        GPL code (unless that specific GPL code includes an exception for
+        OpenSSL - a habit that is growing more and more common). If OpenSSL's
+        licensing is a problem for you, consider using GnuTLS instead.
 
 GnuTLS  http://www.gnutls.org/
 
-        Uses the LGPL[3] license. If this is a problem for you, consider using
-        OpenSSL instead. Also note that GnuTLS itself depends on and uses
-        other libs (libgcrypt and libgpg-error) and they too are LGPL- or
-        GPL-licensed.
+        (May be used for SSL/TLS support) Uses the LGPL[3] license. If this is
+        a problem for you, consider using OpenSSL instead. Also note that
+        GnuTLS itself depends on and uses other libs (libgcrypt and
+        libgpg-error) and they too are LGPL- or GPL-licensed.
 
 c-ares  http://daniel.haxx.se/projects/c-ares/license.html
 
-        Uses an MIT license that is very liberal and imposes no restrictions
-        on any other library or part you may link with.
+        (Used for asynchronous name resolves) Uses an MIT license that is very
+        liberal and imposes no restrictions on any other library or part you
+        may link with.
 
 zlib    http://www.gzip.org/zlib/zlib_license.html
 
-        Uses an MIT-style license that shouldn't collide with any other
-        library.
+        (Used for compressed Transfer-Encoding support) Uses an MIT-style
+        license that shouldn't collide with any other library.
 
 krb4
 
@@ -60,33 +60,43 @@ krb4
         of the code in libcurl that is written to deal with Kerberos4 likewise
         have such a license.
 
-GSSAPI
+MIT Kerberos http://web.mit.edu/kerberos/www/dist/
 
-        While nothing in particular says that a GSS/Kerberos5 library must use
-        any particular license, the one I've used (Heimdal) is Original BSD-
-        licensed with the announcement clause.
+        (May be used for GSS support) MIT licensed, that shouldn't collide
+        with any other parts.
+
+Heimdal http://www.pdc.kth.se/heimdal/
+
+        (May be used for GSS support) Heimdal is Original BSD licensed with
+        the announcement clause.
+
+GNU GSS http://www.gnu.org/software/gss/
+
+        (May be used for GSS support) GNU GSS is GPL licensed. Note that you
+        may not distribute binary curl packages that uses this if you build
+        curl to also link and use any Original BSD licensed libraries!
 
 fbopenssl
 
-        Unclear license. Based on its name, I assume that it uses the OpenSSL
-        license and thus shares the same issues as described for OpenSSL
-        above.
+        (Used for SPNEGO support) Unclear license. Based on its name, I assume
+        that it uses the OpenSSL license and thus shares the same issues as
+        described for OpenSSL above.
 
 libidn  http://www.gnu.org/licenses/lgpl.html
 
-        Uses the GNU Lesser General Public License. LGPL is a variation of GPL
-        with slightly less aggressive "copyleft". This license requires more
-        requirements to be met when distributing binaries, see the license for
-        details. Also note that if you distribute a binary that includes this
-        library, you must also include the full LGPL license text. Please
-        properly point out what parts of the distributed package that the
-        license addresses.
+        (Used for IDNA support) Uses the GNU Lesser General Public
+        License. LGPL is a variation of GPL with slightly less aggressive
+        "copyleft". This license requires more requirements to be met when
+        distributing binaries, see the license for details. Also note that if
+        you distribute a binary that includes this library, you must also
+        include the full LGPL license text. Please properly point out what
+        parts of the distributed package that the license addresses.
 
 OpenLDAP http://www.openldap.org/software/release/license.html
 
-        Uses a Modified BSD-style license. Since libcurl uses OpenLDAP as a
-        shared library only, I have not heard of anyone that ships OpenLDAP
-        linked with libcurl in an app.
+        (Used for LDAP support) Uses a Modified BSD-style license. Since
+        libcurl uses OpenLDAP as a shared library only, I have not heard of
+        anyone that ships OpenLDAP linked with libcurl in an app.
 
 
 [1] = GPL - GNU General Public License: http://www.gnu.org/licenses/gpl.html

docs/Makefile.am

@@ -14,10 +14,10 @@ SUBDIRS = examples libcurl
 
 CLEANFILES = $(GENHTMLPAGES) $(PDFPAGES)
 
-EXTRA_DIST = MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS SSLCERTS	\
- README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS VERSIONS	\
- KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) HISTORY INSTALL		\
- $(PDFPAGES) LICENSE-MIXING README.netware
+EXTRA_DIST = MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS SSLCERTS	 \
+ README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS VERSIONS	 \
+ KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) HISTORY INSTALL		 \
+ $(PDFPAGES) LICENSE-MIXING README.netware DISTRO-DILEMMA INSTALL.devcpp
 
 MAN2HTML= roffit < $< >$@
 

docs/THANKS

@@ -4,91 +4,462 @@
 
  If you have contributed but are missing here, please let us know!
 
-Alan Pinstein, Albert Chin-A-Young, Albert Choy, Aleksandar Milivojevic, Alex
-aka WindEagle, Alex Neblett, Alex Suykov, Alexander Kourakos, Alexander
-Krasnostavsky, Alexander Zhuravlev, Alexis Carvalho, Andi Jahja, Andreas Damm,
-Andreas Olsson, Andreas Rieke, Andrew Francis, Andrew Fuller, Andr<64>s Garc<72>a,
-Andy Cedilnik, Andy Serpa, Angus Mackay, Antoine Calando, Anton Kalmykov,
-Arkadiusz Miskiewicz, Augustus Saunders, Avery Fay, Ben Greear, Benjamin
-Gerard, Bertrand Demiddelaer, Bjorn Reese, Bj<42>rn Stenberg, Bob Schader, Brad
-Burdick, Brent Beardsley, Brian Akins, Brian R Duffy, Bruce Mitchener, Bryan
-Henderson, Bryan Henderson , Bryan Kemp, Caolan McNamara, Casey O'Donnell,
-Chih-Chung Chang, Chris "Bob Bob", Chris Combes, Chris Gaukroger, Chris
-Maltby, Christian Kurz, Christian Robottom Reis, Christophe Demory, Christophe
-Legry, Christopher R. Palmer, Clarence Gardner, Clifford Wolf, Cody Jones,
-Colin Watson, Colm Buckley, Cory Nelson, Craig Davison, Craig Markwardt, Cris
-Bailiff, Cyrill Osterwalder, Damien Adant, Dan Becker, Dan C, Dan Fandrich,
-Dan Torop, Dan Zitter, Daniel at touchtunes, Daniel Stenberg, Dave Dribin,
-Dave Halbakken, Dave Hamilton, Dave May, David Byron, David Cohen, David
-Eriksson, David Houlder, David Hull, David J Meyer, David James, David Kimdon,
-David LeBlanc, David Odin, David Phillips, David Shaw, David Tarendash, David
-Thiel, Detlef Schmier, Diego Casorran, Dimitris Sarris, Dinar, Dirk
-Eddelbuettel, Dirk Manske, Dolbneff A.V, Domenico Andreoli, Dominick Meglio,
-Doug Kaufman, Doug Porter, Douglas E. Wegscheid, Douglas R. Horner, Dustin
-Boswell, Dylan Ellicott, Dylan Salisbury, Early Ehlinger, Edin Kadribasic,
-Ellis Pritchard, Emiliano Ida, Enrico Scholz, Enrik Berkhan, Eric Lavigne,
-Eric Melville, Eric Rautman, Eric Thelin, Eric Vergnaud, Eric Young, Erick
-Nuwendam, Erwan Legrand, Erwin Authried, Evan Jordan, Fabrizio Ammollo, Fedor
-Karpelevitch, Felix von Leitner, Florian Schoppmann, Forrest Cahoon, Frank
-Keeney, Frank Ticheler, Fred New, Fred Noz, Frederic Lepied, Gautam Mani, Gaz
-Iqbal, Georg Horn, Georg Huettenegger, Gerd v. Egidy, Gerhard Herre, Giaslas
-Georgios, Gilad, Gilbert Ramirez Jr., Gisle Vanem, Giuseppe Attardi, Giuseppe
-D'Ambrosio, Glen Nakamura, Glen Scott, Greg Hewgill, Greg Onufer, Grigory
-Entin, Guenole Bescon, Guillaume Arluison, Gustaf Hui, Gwenole Beauchesne,
-G<EFBFBD>tz Babin-Ebell, G<>nter Knauf, Hamish Mackenzie, Hanno Kranzhoff, Hans
-Steegers, Hardeep Singh, Harshal Pradhan, Heikki Korpela, Henrik Storner,
-Hzhijun, Ian Ford, Ian Gulliver, Ian Wilkes, Ignacio Vazquez-Abrams, Ilguiz
-Latypov, Ingo Ralf Blum, Ingo Wilken, Jacky Lam, Jacob Meuser, James Bursa,
-James Clancy, James Cone, James Gallagher, James Griffiths, James MacMillan,
-Jamie Lokier, Jamie Wilkinson, Jason S. Priebe, Jean-Claude Chauve, Jean-Louis
-Lemaire, Jean-Marc Ranger, Jean-Philippe Barrette-LaPierre, Jeff Lawson, Jeff
-Phillips, Jeffrey Pohlmeyer, Jeremy Friesner, Jesper Jensen, Jesse Noller, Jim
-Drash, Joe Halpin, Joel Chen, Johan Anderson, Johan Nilsson, John Crow, John
-Janssen, John Lask, John McGowan, Jon Travis, Jon Turner, Jonas Forsman,
-Jonatan Lander, Jonathan Hseu, Jongki Suwandi, Josh Kapell, Juan F. Codagnone,
-Juan Ignacio Herv<72>s, Juergen Wilke, Jukka Pihl, Julian Noble, Jun-ichiro
-itojun Hagino, Jurij Smakov, J<>rg Mueller-Tolk, J<>rn Hartroth, Kai Sommerfeld,
-Kai-Uwe Rommel, Kang-Jin Lee, Karol Pietrzak, Keith MacDonald, Keith McGuigan,
-Ken Hirsch, Ken Rastatter, Kevin Fisk, Kevin Roth, Kimmo Kinnunen, Kjell
-Ericson, Kjetil Jacobsen, Klevtsov Vadim, Kris Kennaway, Krishnendu Majumdar,
-Kristian K<>hntopp, Kyle Sallee, Lachlan O'Dea, Larry Campbell, Larry Fahnoe,
-Lars Gustafsson, Lars J. Aas, Lars Nilsson, Lars Torben Wilson, Legoff
-Vincent, Lehel Bernadt, Len Krause, Linas Vepstas, Ling Thio, Linus Nielsen
-Feltzing, Loic Dachary, Loren Kirkby, Luca Altea, Luca Alteas, Lucas Adamski,
-Lukasz Czekierda, Luke Call, Luong Dinh Dung, Maciej W. Rozycki, Marc Boucher,
-Marcelo Juchem , Marcin Konicki, Marco G. Salvagno, Marcus Webster, Mark
-Butler, Markus Moeller, Markus Oberhumer, Martijn Koster, Martin C. Martin,
-Martin Hedenfalk, Marty Kuhrt, Maruko, Massimiliano Ziccardi, Mathias
-Axelsson, Mats Lidell, Matt Veenstra, Matthew Blain, Matthew Clarke, Maurice
-Barnum, Mekonikum, Mettgut Jamalla, Michael Benedict, Michael Curtis, Michael
-Mealling, Michal Bonino, Mihai Ionescu, Mike Bytnar, Mike Dobbs, Miklos
-Nemeth, Mitz Wark, Mohamed Lrhazi, Mohun Biswas, Moonesamy, Nathan O'Sullivan,
-Naveen Noel, Neil Dunbar, Neil Spring, Nic Roets, Nick Gimbrone, Nick Humfrey,
-Nico Baggus, Nicolas Berloquin, Nicolas Croiset, Niels van Tongeren, Nikita
-Schmidt, nk, Nodak Sodak, Oren Tirosh, P R Schaffner, Patrick Bihan-Faou,
-Patrick Smith, Paul Harrington, Paul Marquis, Paul Moore, Paul Nolan, Pavel
-Cenek, Pavel Orehov, Pawel A. Gajda, Pedro Neves, Pete Su, Peter Bray, Peter
-Forret, Peter Pentchev, Peter Sylvester, Peter Todd, Peter Verhas, Peter
-Wullinger, Phil Karn, Philip Gladstone, Philippe Hameau, Philippe Raoult,
-Pierre, Puneet Pawaia, Rafael Sagula, Ralph Beckmann, Ralph Mitchell, Ramana
-Mokkapati, Randy McMurchy, Reinout van Schouwen, Renaud Chaillat, Renaud
-Duhaut, Rene Bernhardt, Rene Rebe, Ricardo Cadime, Rich Gray, Richard Archer,
-Richard Atterer, Richard Bramante, Richard Cooper, Richard Gorton, Richard
-Prescott, Rick Jones, Rick Richardson, Rob Stanzel, Robert D. Young, Robert
-Olson, Robert Weaver, Robin Kay, Rodney Simmons, Roland Krikava, Roland
-Zimmermann, Roman Koifman, Ron Zapp, Rosimildo da Silva, Roy Shan, Rune
-Kleveland, Ryan Nelson, S. Moonesamy, Salvador D<>vila, Salvatore Sorrentino,
-Sampo Kellomaki, Samuel D<>az Garc<72>a, Samuel Listopad, Sander Gates, Saul good,
-Sebastien Willemijns, Sergio Ballestrero, Seshubabu Pasam, Shard, Shawn
-Poulson, Siddhartha Prakash Jain, Simon Dick, Simon Liu, Spiridonoff A.V,
-Stadler Stephan, Stefan Ulrich, Stephan Bergmann, Stephen Kick, Stephen More,
-Sterling Hughes, Steve Green, Steve Lhomme, Steve Marx, Steve Oliphant, Steven
-Bazyl, Steven G. Johnson, Stoned Elipot, Sven Neuhaus, swalkaus at yahoo.com,
-S<EFBFBD>bastien Willemijns, T. Bharath, T. Yamada, Thomas Schwinge, Thomas Tonino,
-Tim Baker, Tim Bartley, Tim Costello, Tim Sneddon, Toby Peterson, Tom Benoist,
-Tom Lee, Tom Mattison, Tom Moers, Tom Zerucha, Tomas Pospisek, Tomas Szepe,
-Tomasz Lacki, Tommy Tam, Ton Voon, Tor Arntsen, Torsten Foertsch, Toshiyuki
-Maezawa, Traian Nicolescu, Troels Walsted Hansen, Troy Engel, Ulrich Zadow,
-Vincent Bronner, Vincent Penquerc'h, Vincent Sanders, Vojtech Janota, Vojtech
-Minarik, Walter J. Mack, Wayne Haigh, Werner Koch, Wesley Laxton, Wez Furlong,
-Wilfredo Sanchez, Wojciech Zwiefka, Yarram Sunil, Zvi Har'El
+Adrian Schuur
+Alan Pinstein
+Albert Chin-A-Young
+Albert Choy
+Aleksandar Milivojevic
+Alex Neblett
+Alex Suykov
+Alex aka WindEagle
+Alexander Kourakos
+Alexander Krasnostavsky
+Alexander Zhuravlev
+Alexis Carvalho
+Andi Jahja
+Andreas Damm
+Andreas Olsson
+Andreas Rieke
+Andres Garcia
+Andrew Bushnell
+Andrew Francis
+Andrew Fuller
+Andr<EFBFBD>s Garc<72>a
+Andy Cedilnik
+Andy Serpa
+Angus Mackay
+Antoine Calando
+Anton Kalmykov
+Arkadiusz Miskiewicz
+Augustus Saunders
+Avery Fay
+Ben Greear
+Ben Madsen
+Benjamin Gerard
+Bertrand Demiddelaer
+Bjorn Reese
+Bj<EFBFBD>rn Stenberg
+Bob Schader
+Brad Burdick
+Brent Beardsley
+Brian Akins
+Brian R Duffy
+Bruce Mitchener
+Bryan Henderson
+Bryan Henderson 
+Bryan Kemp
+Caolan McNamara
+Casey O'Donnell
+Chih-Chung Chang
+Chris "Bob Bob"
+Chris Combes
+Chris Gaukroger
+Chris Maltby
+Christian Kurz
+Christian Robottom Reis
+Christophe Demory
+Christophe Legry
+Christopher R. Palmer
+Clarence Gardner
+Clifford Wolf
+Cody Jones
+Colin Watson
+Colm Buckley
+Cory Nelson
+Craig Davison
+Craig Markwardt
+Cris Bailiff
+Cyrill Osterwalder
+Damien Adant
+Dan Becker
+Dan C
+Dan Fandrich
+Dan Torop
+Dan Zitter
+Daniel Stenberg
+Daniel at touchtunes
+Darryl House
+Dave Dribin
+Dave Halbakken
+Dave Hamilton
+Dave May
+David Byron
+David Cohen
+David Eriksson
+David Houlder
+David Hull
+David J Meyer
+David James
+David Kimdon
+David LeBlanc
+David Odin
+David Phillips
+David Shaw
+David Tarendash
+David Thiel
+David Yan
+Detlef Schmier
+Diego Casorran
+Dimitris Sarris
+Dinar
+Dirk Eddelbuettel
+Dirk Manske
+Dmitry Bartsevich
+Dolbneff A.V
+Domenico Andreoli
+Dominick Meglio
+Doug Kaufman
+Doug Porter
+Douglas E. Wegscheid
+Douglas R. Horner
+Dustin Boswell
+Dylan Ellicott
+Dylan Salisbury
+Early Ehlinger
+Edin Kadribasic
+Ellis Pritchard
+Emiliano Ida
+Enrico Scholz
+Enrik Berkhan
+Eric Cooper
+Eric Lavigne
+Eric Melville
+Eric Rautman
+Eric Thelin
+Eric Vergnaud
+Eric Young
+Erick Nuwendam
+Erwan Legrand
+Erwin Authried
+Evan Jordan
+Fabrizio Ammollo
+Fedor Karpelevitch
+Felix von Leitner
+Florian Schoppmann
+Forrest Cahoon
+Frank Keeney
+Frank Ticheler
+Fred New
+Fred Noz
+Frederic Lepied
+Gautam Mani
+Gaz Iqbal
+Georg Horn
+Georg Huettenegger
+Georg Wicherski
+Gerd v. Egidy
+Gerhard Herre
+Giaslas Georgios
+Gilad
+Gilbert Ramirez Jr.
+Gisle Vanem
+Giuseppe Attardi
+Giuseppe D'Ambrosio
+Glen Nakamura
+Glen Scott
+Greg Hewgill
+Greg Onufer
+Grigory Entin
+Guenole Bescon
+Guillaume Arluison
+Gustaf Hui
+Gwenole Beauchesne
+G<EFBFBD>tz Babin-Ebell
+G<EFBFBD>nter Knauf
+Hamish Mackenzie
+Hanno Kranzhoff
+Hans Steegers
+Hardeep Singh
+Harshal Pradhan
+Heikki Korpela
+Henrik Storner
+Hzhijun
+Ian Ford
+Ian Gulliver
+Ian Wilkes
+Ignacio Vazquez-Abrams
+Igor Polyakov
+Ilguiz Latypov
+Ingo Ralf Blum
+Ingo Wilken
+Jacky Lam
+Jacob Meuser
+James Bursa
+James Clancy
+James Cone
+James Gallagher
+James Griffiths
+James MacMillan
+Jamie Lokier
+Jamie Wilkinson
+Jason S. Priebe
+Jean-Claude Chauve
+Jean-Louis Lemaire
+Jean-Marc Ranger
+Jean-Philippe Barrette-LaPierre
+Jeff Lawson
+Jeff Phillips
+Jeff Pohlmeyer
+Jeffrey Pohlmeyer
+Jeremy Friesner
+Jesper Jensen
+Jesse Noller
+Jim Drash
+Joe Halpin
+Joel Chen
+Johan Anderson
+Johan Nilsson
+John Crow
+John Janssen
+John Kelly
+John Lask
+John McGowan
+Jon Grubbs
+Jon Travis
+Jon Turner
+Jonas Forsman
+Jonatan Lander
+Jonathan Hseu
+Jongki Suwandi
+Josh Kapell
+Juan F. Codagnone
+Juan Ignacio Herv<72>s
+Juergen Wilke
+Jukka Pihl
+Julian Noble
+Jun-ichiro itojun Hagino
+Jurij Smakov
+J<EFBFBD>rg Mueller-Tolk
+J<EFBFBD>rn Hartroth
+Kai Sommerfeld
+Kai-Uwe Rommel
+Kang-Jin Lee
+Karol Pietrzak
+Keith MacDonald
+Keith McGuigan
+Ken Hirsch
+Ken Rastatter
+Kevin Fisk
+Kevin Lussier
+Kevin Roth
+Kimmo Kinnunen
+Kjell Ericson
+Kjetil Jacobsen
+Klevtsov Vadim
+Kris Kennaway
+Krishnendu Majumdar
+Kristian K<>hntopp
+Kyle Sallee
+Lachlan O'Dea
+Larry Campbell
+Larry Fahnoe
+Lars Gustafsson
+Lars J. Aas
+Lars Nilsson
+Lars Torben Wilson
+Legoff Vincent
+Lehel Bernadt
+Len Krause
+Linas Vepstas
+Ling Thio
+Linus Nielsen Feltzing
+Loic Dachary
+Loren Kirkby
+Luca Altea
+Luca Alteas
+Lucas Adamski
+Lukasz Czekierda
+Luke Call
+Luong Dinh Dung
+Maciej W. Rozycki
+Marc Boucher
+Marcelo Juchem 
+Marcin Konicki
+Marco G. Salvagno
+Marcus Webster
+Mario Schroeder
+Mark Butler
+Markus Moeller
+Markus Oberhumer
+Martijn Koster
+Martin C. Martin
+Martin Hedenfalk
+Marty Kuhrt
+Maruko
+Massimiliano Ziccardi
+Mathias Axelsson
+Mats Lidell
+Matt Veenstra
+Matthew Blain
+Matthew Clarke
+Maurice Barnum
+Mekonikum
+Mettgut Jamalla
+Michael Benedict
+Michael Curtis
+Michael Mealling
+Michael Wallner
+Michal Bonino
+Mihai Ionescu
+Mike Bytnar
+Mike Dobbs
+Miklos Nemeth
+Mitz Wark
+Mohamed Lrhazi
+Mohun Biswas
+Moonesamy
+Nathan O'Sullivan
+Naveen Noel
+Neil Dunbar
+Neil Spring
+Nic Roets
+Nick Gimbrone
+Nick Humfrey
+Nico Baggus
+Nicolas Berloquin
+Nicolas Croiset
+Nicolas Fran<61>ois
+Niels van Tongeren
+Nikita Schmidt
+Nodak Sodak
+Norbert Novotny
+Oren Tirosh
+P R Schaffner
+Patrick Bihan-Faou
+Patrick Smith
+Paul Harrington
+Paul Marquis
+Paul Moore
+Paul Nolan
+Pavel Cenek
+Pavel Orehov
+Pawel A. Gajda
+Pedro Neves
+Pete Su
+Peter Bray
+Peter Forret
+Peter Pentchev
+Peter Sylvester
+Peter Todd
+Peter Verhas
+Peter Wullinger
+Peteris Krumins
+Phil Karn
+Philip Gladstone
+Philippe Hameau
+Philippe Raoult
+Pierre
+Puneet Pawaia
+Rafael Sagula
+Ralph Beckmann
+Ralph Mitchell
+Ramana Mokkapati
+Randy McMurchy
+Reinout van Schouwen
+Renaud Chaillat
+Renaud Duhaut
+Rene Bernhardt
+Rene Rebe
+Ricardo Cadime
+Rich Gray
+Richard Archer
+Richard Atterer
+Richard Bramante
+Richard Clayton
+Richard Cooper
+Richard Gorton
+Richard Prescott
+Rick Jones
+Rick Richardson
+Rob Stanzel
+Robert D. Young
+Robert Olson
+Robert Weaver
+Robin Kay
+Rodney Simmons
+Roland Krikava
+Roland Zimmermann
+Roman Koifman
+Ron Zapp
+Rosimildo da Silva
+Roy Shan
+Rune Kleveland
+Ryan Nelson
+S. Moonesamy
+Salvador D<>vila
+Salvatore Sorrentino
+Sampo Kellomaki
+Samuel D<>az Garc<72>a
+Samuel Listopad
+Sander Gates
+Saul good
+Scott Davis
+Sebastien Willemijns
+Sergio Ballestrero
+Seshubabu Pasam
+Shard
+Shawn Poulson
+Siddhartha Prakash Jain
+Simon Dick
+Simon Josefsson
+Simon Liu
+Spiridonoff A.V
+Stadler Stephan
+Stefan Ulrich
+Stephan Bergmann
+Stephen Kick
+Stephen More
+Sterling Hughes
+Steve Green
+Steve Lhomme
+Steve Marx
+Steve Oliphant
+Steven Bazyl
+Steven G. Johnson
+Stoned Elipot
+Sven Neuhaus
+S<EFBFBD>bastien Willemijns
+T. Bharath
+T. Yamada
+Thomas Schwinge
+Thomas Tonino
+Tim Baker
+Tim Bartley
+Tim Costello
+Tim Sneddon
+Toby Peterson
+Todd Kulesza
+Tom Benoist
+Tom Lee
+Tom Mattison
+Tom Moers
+Tom Zerucha
+Tomas Pospisek
+Tomas Szepe
+Tomasz Lacki
+Tommy Tam
+Ton Voon
+Tor Arntsen
+Torsten Foertsch
+Toshiyuki Maezawa
+Traian Nicolescu
+Troels Walsted Hansen
+Troy Engel
+Tupone Alfredo
+Ulrich Zadow
+Vincent Bronner
+Vincent Penquerc'h
+Vincent Sanders
+Vojtech Janota
+Vojtech Minarik
+Walter J. Mack
+Wayne Haigh
+Werner Koch
+Wesley Laxton
+Wez Furlong
+Wilfredo Sanchez
+Wojciech Zwiefka
+Yarram Sunil
+Zvi Har'El 
+nk
+swalkaus at yahoo.com

docs/TODO

@@ -31,7 +31,7 @@ TODO
  * Introduce a new error code indicating authentication problems (for proxy
    CONNECT error 407 for example). This cannot be an error code, we must not
    return informational stuff as errors, consider a new info returned by
-   curl_easy_getinfo() #845941
+   curl_easy_getinfo() http://curl.haxx.se/bug/view.cgi?id=845941
 
  * Use 'struct lifreq' and SIOCGLIFADDR instead of 'struct ifreq' and
    SIOCGIFADDR on newer Solaris versions as they claim the latter is obsolete.
@@ -40,6 +40,9 @@ TODO
  * Add the following to curl_easy_getinfo(): GET_HTTP_IP, GET_FTP_IP and
    GET_FTP_DATA_IP. Return a string with the used IP. Suggested by Alan.
 
+ * Add option that changes the interval in which the progress callback is
+   called at most.
+
  LIBCURL - multi interface
 
  * Add a curl_multi_fdset() alternative. this allows apps to avoid the
@@ -58,6 +61,17 @@ TODO
    ready to accept read data. Today libcurl feeds the data as soon as it is
    available for reading, no matter what.
 
+ * Add curl_multi_socket() and family to the multi interface that gets file
+   descriptors, as an alternative to the curl_multi_fdset(). This is necessary
+   to allow apps to properly avoid the FD_SETSIZE problem.
+
+ * Make curl_easy_perform() a wrapper-function that simply creates a multi
+   handle, adds the easy handle to it, runs curl_multi_perform() until the
+   transfer is done, then detach the easy handle, destroy the multi handle and
+   return the easy handle's return code. This will thus make everything
+   internally use and assume the multi interface. The select()-loop should use
+   curl_multi_socket().
+
  DOCUMENTATION
 
  * More and better
@@ -69,7 +83,7 @@ TODO
 
  * Support GSS/Kerberos 5 for ftp file transfer. This will allow user
    authentication and file encryption.  Possible libraries and example clients
-   are available from MIT or Heimdal. Requsted by Markus Moeller.
+   are available from MIT or Heimdal. Requested by Markus Moeller.
 
  * REST fix for servers not behaving well on >2GB requests. This should fail
    if the server doesn't set the pointer to the requested index. The tricky
@@ -149,6 +163,25 @@ TODO
    latter two could be alternatives for those looking to reduce the footprint
    of libcurl built with OpenSSL or GnuTLS.
 
+ * Peter Sylvester's patch for SRP on the TLS layer.
+   Awaits OpenSSL support for this, no need to support this in libcurl before
+   there's an OpenSSL release that does it.
+
+ * make the configure --with-ssl option first check for OpenSSL and then for
+   GnuTLS if OpenSSL wasn't detected.
+
+ GnuTLS
+
+ * Get NTLM working using the functions provided by libgcrypt, since GnuTLS
+   already depends on that to function. Not strictly SSL/TLS related, but
+   hey... Another option is to get available DES and MD4 source code from the
+   cryptopp library. They are fine license-wise, but are C++.
+
+ * SSL engine stuff?
+
+ * Work out a common method with Peter Sylvester's OpenSSL-patch for SRP
+   on the TLS to provide name and password
+
  LDAP
 
  * Look over the implementation. The looping will have to "go away" from the
@@ -157,12 +190,6 @@ TODO
 
  NEW PROTOCOLS
 
- * TFTP - RFC1350 (protocol) and RFC3617 (URI format)
-
-   Dan Fandrich: I wrote a tftp protocol module as part of the I-Boot
-   bootloader under a BSD-style license with attribution clause
-   http://download.intrinsyc.com/supported/tools/i-boot-lite/i-boot-lite-1.8/src/libs/net/tftp.c
-
  * RTSP - RFC2326 (protocol - very HTTP-like, also contains URL description)
 
  * SFTP/SCP/SSH (no RFCs for protocol nor URI/URL format). An implementation
@@ -184,7 +211,7 @@ TODO
  * Globbing support for -d and -F, as in 'curl -d "name=foo[0-9]" URL'.
    Requested by Dane Jensen and others. This is easily scripted though.
 
- * Add an option that prevents cURL from overwiting existing local files. When
+ * Add an option that prevents cURL from overwriting existing local files. When
    used, and there already is an existing file with the target file name
    (either -O or -o), a number should be appended (and increased if already
    existing). So that index.html becomes first index.html.1 and then

docs/curl-config.1

@@ -64,7 +64,7 @@ Outputs version information about the installed libcurl, in numerical mode.
 This outputs the version number, in hexadecimal, with 8 bits for each part;
 major, minor, patch. So that libcurl 7.7.4 would appear as 070704 and libcurl
 12.13.14 would appear as 0c0d0e... Note that the initial zero might be
-omitted.
+omitted. (This option was broken in the 7.15.0 release.)
 .SH "EXAMPLES"
 What linker options do I need when I link with libcurl?
 

docs/curl.1

@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH curl 1 "28 Apr 2005" "Curl 7.14.0" "Curl Manual"
+.TH curl 1 "24 Nov 2005" "Curl 7.15.1" "Curl Manual"
 .SH NAME
 curl \- transfer a URL
 .SH SYNOPSIS
@@ -30,8 +30,8 @@ curl \- transfer a URL
 .SH DESCRIPTION
 .B curl
 is a tool to transfer data from or to a server, using one of the supported
-protocols (HTTP, HTTPS, FTP, FTPS, GOPHER, DICT, TELNET, LDAP or FILE). The
-command is designed to work without user interaction.
+protocols (HTTP, HTTPS, FTP, FTPS, TFTP, GOPHER, DICT, TELNET, LDAP or
+FILE). The command is designed to work without user interaction.
 
 curl offers a busload of useful tricks like proxy support, user
 authentication, ftp upload, HTTP post, SSL (https:) connections, cookies, file
@@ -64,6 +64,17 @@ several ones next to each other:
 You can specify any amount of URLs on the command line. They will be fetched
 in a sequential manner in the specified order.
 
+Since curl 7.15.1 you can also specify step counter for the ranges, so that
+you can get every Nth number or letter:
+
+ http://www.numericals.com/file[1-100:10].txt
+ http://www.letters.com/file[a-z:2].txt
+
+If you specify URL without protocol:// prefix, curl will attempt to guess what
+protocol you might want. It will then default to HTTP but try other protocols
+based on often-used host name prefixes. For example, for host names starting
+with "ftp." curl will assume you want to speak FTP.
+
 Curl will attempt to re-use connections for multiple file transfers, so that
 getting many files from the same server will not do multiple connects /
 handshakes. This improves speed. Of course this is only done on files
@@ -347,6 +358,15 @@ If this option is used twice, the second will again disable silent failure.
 using this option can be used to override a previous --ftp-port option. (Added
 in 7.11.0)
 
+If this option is used twice, the second will again disable silent failure.
+.IP "--ftp-skip-pasv-ip"
+(FTP) Tell curl to not use the IP address the server suggests in its response
+to curl's PASV command when curl connects the data connection. Instead curl
+will re-use the same IP address it already uses for the control
+connection. (Added in 7.14.2)
+
+This option has no effect if PORT, EPRT or EPSV is used instead of PASV.
+
 If this option is used twice, the second will again disable silent failure.
 .IP "--ftp-ssl"
 (FTP) Make the FTP connection switch to use SSL/TLS. (Added in 7.11.0)
@@ -421,9 +441,19 @@ set headers without knowing perfectly well what you're doing. Replacing an
 internal header with one without content on the right side of the colon will
 prevent that header from appearing.
 
+curl will make sure that each header you add/replace get sent with the proper
+end of line marker, you should thus \fBnot\fP add that as a part of the header
+content: do not add newlines or carriage returns they will only mess things up
+for you.
+
 See also the \fI-A/--user-agent\fP and \fI-e/--referer\fP options.
 
 This option can be used multiple times to add/replace/remove multiple headers.
+.IP "--ignore-content-length"
+(HTTP)
+Ignore the Content-Length header. This is particularly useful for servers
+running Apache 1.x, which will report incorrect Content-Length for files
+larger than 2 gigabytes.
 .IP "-i/--include"
 (HTTP)
 Include the HTTP-header in the output. The HTTP-header includes things
@@ -569,8 +599,7 @@ this given limit. This concerns both FTP and HTTP transfers.
 .IP "-m/--max-time <seconds>"
 Maximum time in seconds that you allow the whole operation to take.  This is
 useful for preventing your batch jobs from hanging for hours due to slow
-networks or links going down.  This doesn't work fully in win32 systems.  See
-also the \fI--connect-timeout\fP option.
+networks or links going down.  See also the \fI--connect-timeout\fP option.
 
 If this option is used several times, the last one will be used.
 .IP "-M/--manual"
@@ -589,7 +618,7 @@ directory.
 
 A quick and very simple example of how to setup a \fI.netrc\fP to allow curl
 to ftp to the machine host.domain.com with user name \&'myself' and password
-'secret' should look similar to:
+\&'secret' should look similar to:
 
 .B "machine host.domain.com login myself password secret"
 
@@ -608,6 +637,10 @@ This option requires that the library was built with GSSAPI support. This is
 not very common. Use \fI-V/--version\fP to see if your version supports
 GSS-Negotiate.
 
+When using this option, you must also provide a fake -u/--user option to
+activate the authentication code properly. Sending a '-u :' is enough as the
+user name and password from the -u option aren't actually used.
+
 If this option is used several times, the following occurrences make no
 difference.
 .IP "-N/--no-buffer"
@@ -747,7 +780,7 @@ specifies the second 500 bytes
 .B -500
 specifies the last 500 bytes
 .TP
-.B 9500
+.B 9500-
 specifies the bytes from offset 9500 and forward
 .TP
 .B 0-0,-1
@@ -894,10 +927,18 @@ If this option is used several times, each occurrence will toggle it on/off.
 Specify user and password to use for server authentication. Overrides
 \fI-n/--netrc\fP and \fI--netrc-optional\fP.
 
+If you use an SSPI-enabled curl binary and do NTLM autentication, you can
+force curl to pick up the user name and password from your environment by
+simply specifying a single colon with this option: "-u :".
+
 If this option is used several times, the last one will be used.
 .IP "-U/--proxy-user <user:password>"
 Specify user and password to use for proxy authentication.
 
+If you use an SSPI-enabled curl binary and do NTLM autentication, you can
+force curl to pick up the user name and password from your environment by
+simply specifying a single colon with this option: "-U :".
+
 If this option is used several times, the last one will be used.
 .IP "--url <URL>"
 Specify a URL to fetch. This option is mostly handy when you want to specify
@@ -958,11 +999,11 @@ SSPI is supported. If you use NTLM and set a blank user name, curl will
 authenticate with your current user and password.
 .RE
 .IP "-w/--write-out <format>"
-Defines what to display after a completed and successful operation. The format
-is a string that may contain plain text mixed with any number of variables. The
-string can be specified as "string", to get read from a particular file you
-specify it "@filename" and to tell curl to read the format from stdin you
-write "@-".
+Defines what to display on stdout after a completed and successful
+operation. The format is a string that may contain plain text mixed with any
+number of variables. The string can be specified as "string", to get read from
+a particular file you specify it "@filename" and to tell curl to read the
+format from stdin you write "@-".
 
 The variables present in the output format will be substituted by the value or
 text that curl thinks fit, as described below. All variables are specified
@@ -1058,12 +1099,16 @@ transparently be converted to HTTP. It means that certain protocol specific
 operations might not be available. This is not the case if you can tunnel
 through the proxy, as done with the \fI-p/--proxytunnel\fP option.
 
+Starting with 7.14.1, the proxy host can be specified the exact same way as
+the proxy environment variables, include protocol prefix (http://) and
+embedded user + password.
+
 If this option is used several times, the last one will be used.
 .IP "-X/--request <command>"
-(HTTP)
-Specifies a custom request to use when communicating with the HTTP server.
-The specified request will be used instead of the standard GET. Read the
-HTTP 1.1 specification for details and explanations.
+(HTTP) Specifies a custom request method to use when communicating with the
+HTTP server.  The specified request will be used instead of the method
+otherwise used (which defaults to GET). Read the HTTP 1.1 specification for
+details and explanations.
 
 (FTP)
 Specifies a custom FTP command to use instead of LIST when doing file lists
@@ -1100,7 +1145,8 @@ If this option is used several times, the last one will be used.
 .IP "--max-redirs <num>"
 Set maximum number of redirection-followings allowed. If \fI-L/--location\fP
 is used, this option can be used to prevent curl from following redirections
-\&"in absurdum".
+\&"in absurdum". By default, the limit is set to 50 redirections. Set this
+option to -1 to make it limitless.
 
 If this option is used several times, the last one will be used.
 .IP "-0/--http1.0"
@@ -1157,7 +1203,7 @@ Sets proxy server to use for GOPHER.
 Sets proxy server to use if no protocol-specific proxy is set.
 .IP "NO_PROXY <comma-separated list of hosts>"
 list of host names that shouldn't go through any proxy. If set to a asterisk
-'*' only, it matches all hosts.
+\&'*' only, it matches all hosts.
 .SH EXIT CODES
 There exists a bunch of different error codes and their corresponding error
 messages that may appear during bad conditions. At the time of this writing,
@@ -1179,7 +1225,9 @@ Failed to connect to host.
 .IP 8
 FTP weird server reply. The server sent data curl couldn't parse.
 .IP 9
-FTP access denied. The server denied login.
+FTP access denied. The server denied login or denied access to the particular
+resource or directory you wanted to reach. Most often you tried to change to a
+directory that doesn't exist on the server.
 .IP 10
 FTP user/password incorrect. Either one or both were not accepted by the
 server.

docs/examples/Makefile.am

@@ -10,7 +10,8 @@ EXTRA_DIST = README curlgtk.c sepheaders.c simple.c postit2.c		\
  post-callback.c multi-app.c multi-double.c multi-single.c		\
  multi-post.c fopen.c simplepost.c makefile.dj curlx.c https.c		\
  multi-debugcallback.c fileupload.c getinfo.c ftp3rdparty.c debug.c	\
- anyauthput.c htmltitle.cc htmltidy.c opensslthreadlock.c
+ anyauthput.c htmltitle.cc htmltidy.c opensslthreadlock.c		\
+ cookie_interface.c cacertinmem.c
 
 all:
 	@echo "done"

docs/examples/cacertinmem.c

@@ -0,0 +1,138 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * Example using a "in core" PEM certificate to retrieve a https page.
+ * Written by Theo Borm
+ */
+
+/* on a netBSD system with OPENSSL& LIBCURL installed from
+ * pkgsrc (using default paths) this program can be compiled using:
+ * gcc -I/usr/pkg/include -L/usr/pkg/lib -lcurl -Wl,-R/usr/pkg/lib -lssl
+ * -lcrypto -lz -o curlcacerttest curlcacerttest.c
+ * on other operating systems you may want to change paths to headers
+ * and libraries
+*/
+#include <openssl/ssl.h>
+#include <curl/curl.h>
+#include <stdio.h>
+
+size_t writefunction( void *ptr, size_t size, size_t nmemb, void *stream)
+{
+  fwrite(ptr,size,nmemb,stream);
+  return(nmemb*size);
+}
+
+static CURLcode sslctx_function(CURL * curl, void * sslctx, void * parm)
+{
+  X509_STORE * store;
+  X509 * cert=NULL;
+  BIO * bio;
+  char * mypem = /* www.cacert.org */
+    "-----BEGIN CERTIFICATE-----\n"\
+    "MIIHPTCCBSWgAwIBAgIBADANBgkqhkiG9w0BAQQFADB5MRAwDgYDVQQKEwdSb290\n"\
+    "IENBMR4wHAYDVQQLExVodHRwOi8vd3d3LmNhY2VydC5vcmcxIjAgBgNVBAMTGUNB\n"\
+    "IENlcnQgU2lnbmluZyBBdXRob3JpdHkxITAfBgkqhkiG9w0BCQEWEnN1cHBvcnRA\n"\
+    "Y2FjZXJ0Lm9yZzAeFw0wMzAzMzAxMjI5NDlaFw0zMzAzMjkxMjI5NDlaMHkxEDAO\n"\
+    "BgNVBAoTB1Jvb3QgQ0ExHjAcBgNVBAsTFWh0dHA6Ly93d3cuY2FjZXJ0Lm9yZzEi\n"\
+    "MCAGA1UEAxMZQ0EgQ2VydCBTaWduaW5nIEF1dGhvcml0eTEhMB8GCSqGSIb3DQEJ\n"\
+    "ARYSc3VwcG9ydEBjYWNlcnQub3JnMIICIjANBgkqhkiG9w0BAQEFAAOCAg8AMIIC\n"\
+    "CgKCAgEAziLA4kZ97DYoB1CW8qAzQIxL8TtmPzHlawI229Z89vGIj053NgVBlfkJ\n"\
+    "8BLPRoZzYLdufujAWGSuzbCtRRcMY/pnCujW0r8+55jE8Ez64AO7NV1sId6eINm6\n"\
+    "zWYyN3L69wj1x81YyY7nDl7qPv4coRQKFWyGhFtkZip6qUtTefWIonvuLwphK42y\n"\
+    "fk1WpRPs6tqSnqxEQR5YYGUFZvjARL3LlPdCfgv3ZWiYUQXw8wWRBB0bF4LsyFe7\n"\
+    "w2t6iPGwcswlWyCR7BYCEo8y6RcYSNDHBS4CMEK4JZwFaz+qOqfrU0j36NK2B5jc\n"\
+    "G8Y0f3/JHIJ6BVgrCFvzOKKrF11myZjXnhCLotLddJr3cQxyYN/Nb5gznZY0dj4k\n"\
+    "epKwDpUeb+agRThHqtdB7Uq3EvbXG4OKDy7YCbZZ16oE/9KTfWgu3YtLq1i6L43q\n"\
+    "laegw1SJpfvbi1EinbLDvhG+LJGGi5Z4rSDTii8aP8bQUWWHIbEZAWV/RRyH9XzQ\n"\
+    "QUxPKZgh/TMfdQwEUfoZd9vUFBzugcMd9Zi3aQaRIt0AUMyBMawSB3s42mhb5ivU\n"\
+    "fslfrejrckzzAeVLIL+aplfKkQABi6F1ITe1Yw1nPkZPcCBnzsXWWdsC4PDSy826\n"\
+    "YreQQejdIOQpvGQpQsgi3Hia/0PsmBsJUUtaWsJx8cTLc6nloQsCAwEAAaOCAc4w\n"\
+    "ggHKMB0GA1UdDgQWBBQWtTIb1Mfz4OaO873SsDrusjkY0TCBowYDVR0jBIGbMIGY\n"\
+    "gBQWtTIb1Mfz4OaO873SsDrusjkY0aF9pHsweTEQMA4GA1UEChMHUm9vdCBDQTEe\n"\
+    "MBwGA1UECxMVaHR0cDovL3d3dy5jYWNlcnQub3JnMSIwIAYDVQQDExlDQSBDZXJ0\n"\
+    "IFNpZ25pbmcgQXV0aG9yaXR5MSEwHwYJKoZIhvcNAQkBFhJzdXBwb3J0QGNhY2Vy\n"\
+    "dC5vcmeCAQAwDwYDVR0TAQH/BAUwAwEB/zAyBgNVHR8EKzApMCegJaAjhiFodHRw\n"\
+    "czovL3d3dy5jYWNlcnQub3JnL3Jldm9rZS5jcmwwMAYJYIZIAYb4QgEEBCMWIWh0\n"\
+    "dHBzOi8vd3d3LmNhY2VydC5vcmcvcmV2b2tlLmNybDA0BglghkgBhvhCAQgEJxYl\n"\
+    "aHR0cDovL3d3dy5jYWNlcnQub3JnL2luZGV4LnBocD9pZD0xMDBWBglghkgBhvhC\n"\
+    "AQ0ESRZHVG8gZ2V0IHlvdXIgb3duIGNlcnRpZmljYXRlIGZvciBGUkVFIGhlYWQg\n"\
+    "b3ZlciB0byBodHRwOi8vd3d3LmNhY2VydC5vcmcwDQYJKoZIhvcNAQEEBQADggIB\n"\
+    "ACjH7pyCArpcgBLKNQodgW+JapnM8mgPf6fhjViVPr3yBsOQWqy1YPaZQwGjiHCc\n"\
+    "nWKdpIevZ1gNMDY75q1I08t0AoZxPuIrA2jxNGJARjtT6ij0rPtmlVOKTV39O9lg\n"\
+    "18p5aTuxZZKmxoGCXJzN600BiqXfEVWqFcofN8CCmHBh22p8lqOOLlQ+TyGpkO/c\n"\
+    "gr/c6EWtTZBzCDyUZbAEmXZ/4rzCahWqlwQ3JNgelE5tDlG+1sSPypZt90Pf6DBl\n"\
+    "Jzt7u0NDY8RD97LsaMzhGY4i+5jhe1o+ATc7iwiwovOVThrLm82asduycPAtStvY\n"\
+    "sONvRUgzEv/+PDIqVPfE94rwiCPCR/5kenHA0R6mY7AHfqQv0wGP3J8rtsYIqQ+T\n"\
+    "SCX8Ev2fQtzzxD72V7DX3WnRBnc0CkvSyqD/HMaMyRa+xMwyN2hzXwj7UfdJUzYF\n"\
+    "CpUCTPJ5GhD22Dp1nPMd8aINcGeGG7MW9S/lpOt5hvk9C8JzC6WZrG/8Z7jlLwum\n"\
+    "GCSNe9FINSkYQKyTYOGWhlC0elnYjyELn8+CkcY7v2vcB5G5l1YjqrZslMZIBjzk\n"\
+    "zk6q5PYvCdxTby78dOs6Y5nCpqyJvKeyRKANihDjbPIky/qbn3BHLt4Ui9SyIAmW\n"\
+    "omTxJBzcoTWcFbLUvFUufQb1nA5V9FrWk9p2rSVzTMVD\n"\
+    "-----END CERTIFICATE-----\n";
+  /* get a BIO */
+  bio=BIO_new_mem_buf(mypem, -1);
+  /* use it to read the PEM formatted certificate from memory into an X509
+   * structure that SSL can use
+   */
+  PEM_read_bio_X509(bio, &cert, 0, NULL);
+  if (cert == NULL)
+    printf("PEM_read_bio_X509 failed...\n");
+
+  /* get a pointer to the X509 certificate store (which may be empty!) */
+  store=SSL_CTX_get_cert_store((SSL_CTX *)sslctx);
+
+  /* add our certificate to this store */
+  if (X509_STORE_add_cert(store, cert)==0)
+    printf("error adding certificate\n");
+
+  /* all set to go */
+  return CURLE_OK ;
+}
+
+int main(void)
+{
+  CURL * ch;
+  CURLcode rv;
+
+  rv=curl_global_init(CURL_GLOBAL_ALL);
+  ch=curl_easy_init();
+  rv=curl_easy_setopt(ch,CURLOPT_VERBOSE, 0);
+  rv=curl_easy_setopt(ch,CURLOPT_HEADER, 0);
+  rv=curl_easy_setopt(ch,CURLOPT_NOPROGRESS, 1);
+  rv=curl_easy_setopt(ch,CURLOPT_NOSIGNAL, 1);
+  rv=curl_easy_setopt(ch,CURLOPT_WRITEFUNCTION, *writefunction);
+  rv=curl_easy_setopt(ch,CURLOPT_WRITEDATA, stdout);
+  rv=curl_easy_setopt(ch,CURLOPT_HEADERFUNCTION, *writefunction);
+  rv=curl_easy_setopt(ch,CURLOPT_WRITEHEADER, stderr);
+  rv=curl_easy_setopt(ch,CURLOPT_SSLCERTTYPE,"PEM");
+  rv=curl_easy_setopt(ch,CURLOPT_SSL_VERIFYPEER,1);
+  rv=curl_easy_setopt(ch, CURLOPT_URL, "https://www.cacert.org/");
+
+  /* first try: retrieve page without cacerts' certificate -> will fail
+   */
+  rv=curl_easy_perform(ch);
+  if (rv==CURLE_OK)
+    printf("*** transfer succeeded ***\n");
+  else
+    printf("*** transfer failed ***\n");
+
+  /* second try: retrieve page using cacerts' certificate -> will succeed
+   * load the certificate by installing a function doing the nescessary
+   * "modifications" to the SSL CONTEXT just before link init
+   */
+  rv=curl_easy_setopt(ch,CURLOPT_SSL_CTX_FUNCTION, *sslctx_function);
+  rv=curl_easy_perform(ch);
+  if (rv==CURLE_OK)
+    printf("*** transfer succeeded ***\n");
+  else
+    printf("*** transfer failed ***\n");
+
+  curl_easy_cleanup(ch);
+  curl_global_cleanup();
+}

docs/examples/cookie_interface.c

@@ -0,0 +1,110 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ *  This example shows usage of simple cookie interface. 
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <time.h>
+
+#include <curl/curl.h>
+
+static void
+print_cookies(CURL *curl)
+{
+  CURLcode res;
+  struct curl_slist *cookies;
+  struct curl_slist *nc;
+  int i;
+
+  printf("Cookies, curl knows:\n");
+  res = curl_easy_getinfo(curl, CURLINFO_COOKIELIST, &cookies);
+  if (res != CURLE_OK) {
+    fprintf(stderr, "Curl curl_easy_getinfo failed: %s\n", curl_easy_strerror(res));
+    exit(1);
+  }
+  nc = cookies, i = 1;
+  while (nc) {
+    printf("[%d]: %s\n", i, nc->data);
+    nc = nc->next;
+    i++;
+  }
+  if (i == 1) {
+    printf("(none)\n");
+  }
+  curl_slist_free_all(cookies);
+}
+
+int
+main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  curl_global_init(CURL_GLOBAL_ALL);
+  curl = curl_easy_init();
+  if (curl) {
+    char nline[256];
+
+    curl_easy_setopt(curl, CURLOPT_URL, "http://www.google.com/"); /* google.com sets "PREF" cookie */
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
+    curl_easy_setopt(curl, CURLOPT_COOKIEFILE, ""); /* just to start the cookie engine */
+    res = curl_easy_perform(curl);
+    if (res != CURLE_OK) {
+      fprintf(stderr, "Curl perform failed: %s\n", curl_easy_strerror(res));
+      return 1;
+    }
+
+    print_cookies(curl);
+
+    printf("Erasing curl's knowledge of cookies!\n");
+    curl_easy_setopt(curl, CURLOPT_COOKIELIST, "ALL");
+
+    print_cookies(curl);
+
+    printf("-----------------------------------------------\n"
+           "Setting a cookie \"PREF\" via cookie interface:\n");
+#ifdef WIN32
+#define snprintf _snprintf
+#endif
+    /* Netscape format cookie */
+    snprintf(nline, 256, "%s\t%s\t%s\t%s\t%u\t%s\t%s",
+      ".google.com", "TRUE", "/", "FALSE", time(NULL) + 31337, "PREF", "hello google, i like you very much!");
+    res = curl_easy_setopt(curl, CURLOPT_COOKIELIST, nline);
+    if (res != CURLE_OK) {
+      fprintf(stderr, "Curl curl_easy_setopt failed: %s\n", curl_easy_strerror(res));
+      return 1;            
+    }
+
+    /* HTTP-header style cookie */
+    snprintf(nline, 256,
+      "Set-Cookie: OLD_PREF=3d141414bf4209321; "
+      "expires=Sun, 17-Jan-2038 19:14:07 GMT; path=/; domain=.google.com");
+    res = curl_easy_setopt(curl, CURLOPT_COOKIELIST, nline);
+    if (res != CURLE_OK) {
+      fprintf(stderr, "Curl curl_easy_setopt failed: %s\n", curl_easy_strerror(res));
+      return 1;            
+    }
+
+    print_cookies(curl);
+
+    res = curl_easy_perform(curl);
+    if (res != CURLE_OK) {
+      fprintf(stderr, "Curl perform failed: %s\n", curl_easy_strerror(res));
+      return 1;
+    }
+  }
+  else {
+    fprintf(stderr, "Curl init failed!\n");
+    return 1;
+  }
+
+  curl_global_cleanup();
+  return 0;
+}

docs/examples/getinmemory.c

@@ -14,6 +14,8 @@
  */
 
 #include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
 
 #include <curl/curl.h>
 #include <curl/types.h>
@@ -93,5 +95,8 @@ int main(int argc, char **argv)
    * you're done with it, you should free() it as a nice application.
    */
 
+  if(chunk.memory)
+    free(chunk.memory);
+
   return 0;
 }

docs/examples/makefile.dj

@@ -20,7 +20,8 @@ PROGRAMS  = fopen.exe ftpget.exe ftpgetresp.exe ftpupload.exe \
             multi-double.exe multi-post.exe multi-single.exe \
             persistant.exe post-callback.exe postit2.exe \
             sepheaders.exe simple.exe simplessl.exe https.exe \
-            ftp3rdparty.exe getinfo.exe anyauthput.exe
+            ftp3rdparty.exe getinfo.exe anyauthput.exe \
+            cookie_interface.exe
 
 all: $(PROGRAMS)
 

docs/libcurl/curl_easy_getinfo.3

@@ -2,7 +2,7 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH curl_easy_getinfo 3 "22 Dec 2004" "libcurl 7.12.3" "libcurl Manual"
+.TH curl_easy_getinfo 3 "6 Oct 2005" "libcurl 7.12.3" "libcurl Manual"
 .SH NAME
 curl_easy_getinfo - extract information from a curl handle
 .SH SYNOPSIS
@@ -15,9 +15,9 @@ Request internal information from the curl session with this function.  The
 third argument \fBMUST\fP be a pointer to a long, a pointer to a char *, a
 pointer to a struct curl_slist * or a pointer to a double (as this
 documentation describes further down).  The data pointed-to will be filled in
-accordingly and can be relied upon only if the function returns CURLE_OK.
-This function is intended to get used AFTER a performed transfer, all results
-from this function are undefined until the transfer is completed.
+accordingly and can be relied upon only if the function returns CURLE_OK.  Use
+this function AFTER a performed transfer if you want to get transfer- oriented
+data.
 
 You should not free the memory returned by this function unless it is
 explictly mentioned below.
@@ -35,12 +35,14 @@ this.
 Pass a pointer to a long to receive the last received proxy response code to a
 CONNECT request.
 .IP CURLINFO_FILETIME
-Pass a pointer to a long to receive the remote time of the retrieved
-document. If you get -1, it can be because of many reasons (unknown, the
-server hides it or the server doesn't support the command that tells document
-time etc) and the time of the document is unknown. Note that you must tell the
-server to collect this information before the transfer is made, by using the
-CURLOPT_FILETIME option to \fIcurl_easy_setopt(3)\fP. (Added in 7.5)
+Pass a pointer to a long to receive the remote time of the retrieved document
+(in number of seconds since 1 jan 1970 in the GMT/UTC time zone). If you get
+-1, it can be because of many reasons (unknown, the server hides it or the
+server doesn't support the command that tells document time etc) and the time
+of the document is unknown. Note that you must tell the server to collect this
+information before the transfer is made, by using the CURLOPT_FILETIME option
+to \fIcurl_easy_setopt(3)\fP or you will unconditionally get a -1 back. (Added
+in 7.5)
 .IP CURLINFO_TOTAL_TIME
 Pass a pointer to a double to receive the total transaction time in seconds
 for the previous transfer. This time does not include the connect time, so if
@@ -132,6 +134,47 @@ counted).  Combined with \fICURLINFO_REDIRECT_COUNT\fP you are able to know
 how many times libcurl successfully reused existing connection(s) or not.  See
 the Connection Options of \fIcurl_easy_setopt(3)\fP to see how libcurl tries
 to make persistent connections to save time.  (Added in 7.12.3)
+.IP CURLINFO_COOKIELIST
+Pass a pointer to a 'struct curl_slist *' to receive a linked-list of all
+cookies cURL knows (expired ones, too). Don't forget to
+\fIcurl_slist_free_all(3)\fP the list after it has been used.  If there are no
+cookies (cookies for the handle have not been enabled or simply none have been
+received) 'struct curl_slist *' will be set to point to NULL. (Added in
+7.14.1)
+.SH TIMES
+.NF
+An overview of the six time values available from curl_easy_getinfo()
+
+curk_easy_perform()
+    |
+    |--NT
+    |--|--CT
+    |--|--|--PT
+    |--|--|--|--ST
+          |--|--|--TT
+    |--|--|--|--|--RT
+.FI
+.IP NT
+\fICURLINFO_NAMELOOKUP_TIME\fP. The time it took from the start until the name
+resolving was completed.
+.IP CT
+\fICURLINFO_CONNECT_TIME\fP. The time it took from the start until the connect
+to the remote host (or proxy) was completed.
+.IP PT
+\fICURLINFO_PRETRANSFER_TIME\fP. The time it took from the start until the
+file transfer is just about to begin. This includes all pre-transfer commands
+and negotiations that are specific to the particular protocol(s) involved.
+.IP ST
+\fICURLINFO_STARTTRANSFER_TIME\fP. The time it took from the start until the
+first byte is just about to be transferred.
+.IP TT
+\fICURLINFO_TOTAL_TIME\fP. Time of the previous transfer. This time does not
+include the connect time (CT), so if you want the complete operation time, you
+should add that.
+.IP RT
+\fICURLINFO_REDIRECT_TIME\fP. The time it took for all redirection steps
+include name lookup, connect, pretransfer and transfer before final
+transaction was started. So, this is zero if no redirection took place.
 .SH RETURN VALUE
 If the operation was successful, CURLE_OK is returned. Otherwise an
 appropriate error code will be returned.

docs/libcurl/curl_easy_setopt.3

@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH curl_easy_setopt 3 "12 May 2005" "libcurl 7.14.0" "libcurl Manual"
+.TH curl_easy_setopt 3 "27 Oct 2005" "libcurl 7.14.2" "libcurl Manual"
 .SH NAME
 curl_easy_setopt - set options for a curl easy handle
 .SH SYNOPSIS
@@ -44,11 +44,11 @@ between transfers, so if you want subsequent transfers with different options,
 you must change them between the transfers. You can optionally reset all
 options back to internal default with \fIcurl_easy_reset(3)\fP.
 
-\fBNOTE:\fP strings passed to libcurl as 'char *' arguments, will not be
-copied by the library. Instead you should keep them available until libcurl no
-longer needs them. Failing to do so will cause very odd behavior or even
-crashes. libcurl will need them until you call \fIcurl_easy_cleanup(3)\fP or
-you set the same option again to use a different pointer.
+Strings passed to libcurl as 'char *' arguments, will not be copied by the
+library. Instead you should keep them available until libcurl no longer needs
+them. Failing to do so will cause very odd behavior or even crashes. libcurl
+will need them until you call \fIcurl_easy_cleanup(3)\fP or you set the same
+option again to use a different pointer.
 
 The \fIhandle\fP is the return code from a \fIcurl_easy_init(3)\fP or
 \fIcurl_easy_duphandle(3)\fP call.
@@ -70,8 +70,8 @@ preceding the data (like HTTP).
 A non-zero parameter tells the library to shut off the built-in progress meter
 completely.
 
-\fBNOTE:\fP future versions of libcurl is likely to not have any built-in
-progress meter at all.
+Future versions of libcurl is likely to not have any built-in progress meter
+at all.
 .IP CURLOPT_NOSIGNAL
 Pass a long. If it is non-zero, libcurl will not use any functions that
 install signal handlers or any functions that cause signals to be sent to the
@@ -96,19 +96,26 @@ transfer and return \fICURLE_WRITE_ERROR\fP.
 This function may be called with zero bytes data if the transfered file is
 empty.
 
+Set this option to NULL to get the internal default function. The internal
+default function will write the data to the FILE * given with
+\fICURLOPT_WRITEDATA\fP.
+
 Set the \fIstream\fP argument with the \fICURLOPT_WRITEDATA\fP option.
 
-\fBNOTE:\fP you will be passed as much data as possible in all invokes, but
-you cannot possibly make any assumptions. It may be one byte, it may be
+The callback function will be passed as much data as possible in all invokes,
+but you cannot possibly make any assumptions. It may be one byte, it may be
 thousands. The maximum amount of data that can be passed to the write callback
 is defined in the curl.h header file: CURL_MAX_WRITE_SIZE.
 .IP CURLOPT_WRITEDATA
-Data pointer to pass to the file write function. Note that if you specify the
-\fICURLOPT_WRITEFUNCTION\fP, this is the pointer you'll get as input. If you
-don't use a callback, you must pass a 'FILE *' as libcurl will pass this to
-fwrite() when writing data.
+Data pointer to pass to the file write function. If you use the
+\fICURLOPT_WRITEFUNCTION\fP option, this is the pointer you'll get as
+input. If you don't use a callback, you must pass a 'FILE *' as libcurl will
+pass this to fwrite() when writing data.
 
-\fBNOTE:\fP If you're using libcurl as a win32 DLL, you MUST use the
+The internal \fICURLOPT_WRITEFUNCTION\fP will write the data to the FILE *
+given with this option, or to stdout if this option hasn't been set.
+
+If you're using libcurl as a win32 DLL, you \fBMUST\fP use the
 \fICURLOPT_WRITEFUNCTION\fP if you set this option or you will experience
 crashes.
 
@@ -129,15 +136,20 @@ server expected it, like when you've told you will upload N bytes and you
 upload less than N bytes), you may experience that the server "hangs" waiting
 for the rest of the data that won't come.
 
-In libcurl 7.12.1 and later, the read callback may return
-\fICURL_READFUNC_ABORT\fP to stop the current operation at once, with a
-\fICURLE_ABORTED_BY_CALLBACK\fP error code from the transfer.
-.IP CURLOPT_READDATA
-Data pointer to pass to the file read function. Note that if you specify the
-\fICURLOPT_READFUNCTION\fP, this is the pointer you'll get as input. If you
-don't specify a read callback, this must be a valid FILE *.
+The read callback may return \fICURL_READFUNC_ABORT\fP to stop the current
+operation immediately, resulting in a \fICURLE_ABORTED_BY_CALLBACK\fP error
+code from the transfer (Added in 7.12.1)
 
-\fBNOTE:\fP If you're using libcurl as a win32 DLL, you MUST use a
+If you set the callback pointer to NULL, or doesn't set it at all, the default
+internal read function will be used. It is simply doing an fread() on the FILE
+* stream set with \fICURLOPT_READDATA\fP.
+.IP CURLOPT_READDATA
+Data pointer to pass to the file read function. If you use the
+\fICURLOPT_READFUNCTION\fP option, this is the pointer you'll get as input. If
+you don't specify a read callback but instead rely on the default internal
+read function, this data must be a valid readable FILE *.
+
+If you're using libcurl as a win32 DLL, you MUST use a
 \fICURLOPT_READFUNCTION\fP if you set this option.
 
 This option is also known with the older name \fICURLOPT_INFILE\fP, the name
@@ -163,28 +175,38 @@ data, the upload size will remain 0). Returning a non-zero value from this
 callback will cause libcurl to abort the transfer and return
 \fICURLE_ABORTED_BY_CALLBACK\fP.
 
-Also note that \fICURLOPT_NOPROGRESS\fP must be set to FALSE to make this
-function actually get called.
+\fICURLOPT_NOPROGRESS\fP must be set to FALSE to make this function actually
+get called.
 .IP CURLOPT_PROGRESSDATA
 Pass a pointer that will be untouched by libcurl and passed as the first
 argument in the progress callback set with \fICURLOPT_PROGRESSFUNCTION\fP.
 .IP CURLOPT_HEADERFUNCTION
 Function pointer that should match the following prototype: \fIsize_t
 function( void *ptr, size_t size, size_t nmemb, void *stream);\fP. This
-function gets called by libcurl as soon as there is received header data that
-needs to be written down. The headers are guaranteed to be written one-by-one
-and only complete lines are written. Parsing headers should be easy enough
+function gets called by libcurl as soon as it has received header data. The
+header callback will be called once for each header and only complete header
+lines are passed on to the callback. Parsing headers should be easy enough
 using this. The size of the data pointed to by \fIptr\fP is \fIsize\fP
-multiplied with \fInmemb\fP.  The pointer named \fIstream\fP will be the one
-you passed to libcurl with the \fICURLOPT_WRITEHEADER\fP option.  Return the
-number of bytes actually written or return -1 to signal error to the library
+multiplied with \fInmemb\fP. Do not assume that the header line is zero
+terminated! The pointer named \fIstream\fP is the one you set with the
+\fICURLOPT_WRITEHEADER\fP option. The callback function must return the number
+of bytes actually taken care of, or return -1 to signal error to the library
 (it will cause it to abort the transfer with a \fICURLE_WRITE_ERROR\fP return
 code).
+
+Since 7.14.1: When a server sends a chunked encoded transfer, it may contain a
+trailer. That trailer is identical to a HTTP header and if such a trailer is
+received it is passed to the application using this callback as well. There
+are several ways to detect it being a trailer and not an ordinary header: 1)
+it comes after the response-body. 2) it comes after the final header line (CR
+LF) 3) a Trailer: header among the response-headers mention what header to
+expect in the trailer.
 .IP CURLOPT_WRITEHEADER
-Pass a pointer to be used to write the header part of the received data to. If
-you don't use your own callback to take care of the writing, this must be a
-valid FILE *. See also the \fICURLOPT_HEADERFUNCTION\fP option above on how to
-set a custom get-all-headers callback.
+(This option is also known as \fBCURLOPT_HEADERDATA\fP) Pass a pointer to be
+used to write the header part of the received data to. If you don't use your
+own callback to take care of the writing, this must be a valid FILE *. See
+also the \fICURLOPT_HEADERFUNCTION\fP option above on how to set a custom
+get-all-headers callback.
 .IP CURLOPT_DEBUGFUNCTION
 Function pointer that should match the following prototype: \fIint
 curl_debug_callback (CURL *, curl_infotype, char *, size_t, void *);\fP
@@ -223,10 +245,13 @@ perform operation will return the error code from this callback function.  Set
 the \fIparm\fP argument with the \fICURLOPT_SSL_CTX_DATA\fP option. This
 option was introduced in 7.11.0.
 
-\fBNOTE:\fP To use this properly, a non-trivial amount of knowledge of the
-openssl libraries is necessary. Using this function allows for example to use
-openssl callbacks to add additional validation code for certificates, and even
-to change the actual URI of an HTTPS request (example used in the lib509 test
+This function will get called on all new connections made to a server, during
+the SSL negotiation. The SSL_CTX pointer will be a new one every time.
+
+To use this properly, a non-trivial amount of knowledge of the openssl
+libraries is necessary. Using this function allows for example to use openssl
+callbacks to add additional validation code for certificates, and even to
+change the actual URI of an HTTPS request (example used in the lib509 test
 case).  See also the example section for a replacement of the key, certificate
 and trust file settings.
 .IP CURLOPT_SSL_CTX_DATA
@@ -236,14 +261,15 @@ parameter, otherwise \fBNULL\fP. (Added in 7.11.0)
 .SH ERROR OPTIONS
 .IP CURLOPT_ERRORBUFFER
 Pass a char * to a buffer that the libcurl may store human readable error
-messages in. This may be more helpful than just the return code from the
-library. The buffer must be at least CURL_ERROR_SIZE big.
+messages in. This may be more helpful than just the return code from
+\fIcurl_easy_perform\fP. The buffer must be at least CURL_ERROR_SIZE big.
 
 Use \fICURLOPT_VERBOSE\fP and \fICURLOPT_DEBUGFUNCTION\fP to better
 debug/trace why errors happen.
 
-\fBNote:\fP if the library does not return an error, the buffer may not have
-been touched. Do not rely on the contents in those cases.
+If the library does not return an error, the buffer may not have been
+touched. Do not rely on the contents in those cases.
+
 .IP CURLOPT_STDERR
 Pass a FILE * as parameter. Tell libcurl to use this stream instead of stderr
 when showing the progress meter and displaying \fICURLOPT_VERBOSE\fP data.
@@ -264,7 +290,7 @@ given protocol of the set URL is not supported, libcurl will return on error
 \fIcurl_multi_perform(3)\fP. Use \fIcurl_version_info(3)\fP for detailed info
 on which protocols that are supported.
 
-\fBNOTE:\fP \fICURLOPT_URL\fP is the only option that must be set before
+\fICURLOPT_URL\fP is the only option that must be set before
 \fIcurl_easy_perform(3)\fP is called.
 .IP CURLOPT_PROXY
 Set HTTP proxy to use. The parameter should be a char * to a zero terminated
@@ -274,15 +300,20 @@ be prefixed with [protocol]:// since any such prefix will be ignored. The
 proxy's port number may optionally be specified with the separate option
 \fICURLOPT_PROXYPORT\fP.
 
-\fBNOTE:\fP when you tell the library to use an HTTP proxy, libcurl will
-transparently convert operations to HTTP even if you specify an FTP URL
-etc. This may have an impact on what other features of the library you can
-use, such as \fICURLOPT_QUOTE\fP and similar FTP specifics that don't work
-unless you tunnel through the HTTP proxy. Such tunneling is activated with
+When you tell the library to use an HTTP proxy, libcurl will transparently
+convert operations to HTTP even if you specify an FTP URL etc. This may have
+an impact on what other features of the library you can use, such as
+\fICURLOPT_QUOTE\fP and similar FTP specifics that don't work unless you
+tunnel through the HTTP proxy. Such tunneling is activated with
 \fICURLOPT_HTTPPROXYTUNNEL\fP.
 
-\fBNOTE2:\fP libcurl respects the environment variables \fBhttp_proxy\fP,
-\fBftp_proxy\fP, \fBall_proxy\fP etc, if any of those is set.
+libcurl respects the environment variables \fBhttp_proxy\fP, \fBftp_proxy\fP,
+\fBall_proxy\fP etc, if any of those is set. The \fICURLOPT_PROXY\fP option
+does however override any possibly set environment variables.
+
+Starting with 7.14.1, the proxy host string can be specified the exact same
+way as the proxy environment variables, include protocol prefix (http://) and
+embedded user + password.
 .IP CURLOPT_PROXYPORT
 Pass a long with this option to set the proxy port to connect to unless it is
 specified in the proxy string \fICURLOPT_PROXY\fP.
@@ -292,9 +323,9 @@ this are \fICURLPROXY_HTTP\fP and \fICURLPROXY_SOCKS5\fP, with the HTTP one
 being default. (Added in 7.10)
 .IP CURLOPT_HTTPPROXYTUNNEL
 Set the parameter to non-zero to get the library to tunnel all operations
-through a given HTTP proxy. Note that there is a big difference between using
-a proxy and to tunnel through it. If you don't know what this means, you
-probably don't want this tunneling option.
+through a given HTTP proxy. There is a big difference between using a proxy
+and to tunnel through it. If you don't know what this means, you probably
+don't want this tunneling option.
 .IP CURLOPT_INTERFACE
 Pass a char * as parameter. This set the interface name to use as outgoing
 network interface. The name can be an interface name, an IP address or a host
@@ -313,10 +344,14 @@ thread-safe and this will use a global variable.
 to using the share interface instead! See \fICURLOPT_SHARE\fP and
 \fIcurl_share_init(3)\fP.
 .IP CURLOPT_BUFFERSIZE
-Pass a long specifying your preferred size for the receive buffer in libcurl.
-The main point of this would be that the write callback gets called more often
-and with smaller chunks. This is just treated as a request, not an order. You
-cannot be guaranteed to actually get the given size. (Added in 7.10)
+Pass a long specifying your preferred size (in bytes) for the receive buffer
+in libcurl.  The main point of this would be that the write callback gets
+called more often and with smaller chunks. This is just treated as a request,
+not an order. You cannot be guaranteed to actually get the given size. (Added
+in 7.10)
+
+This size is by default set as big as possible (CURL_MAX_WRITE_SIZE), so it
+only makse sense to use this option if you want it smaller.
 .IP CURLOPT_PORT
 Pass a long specifying what remote port number to connect to, instead of the
 one specified in the URL or the default port for the used protocol.
@@ -342,9 +377,9 @@ This parameter controls the preference of libcurl between using user names and
 passwords from your \fI~/.netrc\fP file, relative to user names and passwords
 in the URL supplied with \fICURLOPT_URL\fP.
 
-\fBNote:\fP libcurl uses a user name (and supplied or prompted password)
-supplied with \fICURLOPT_USERPWD\fP in preference to any of the options
-controlled by this parameter.
+libcurl uses a user name (and supplied or prompted password) supplied with
+\fICURLOPT_USERPWD\fP in preference to any of the options controlled by this
+parameter.
 
 Pass a long, set to one of the values described below.
 .RS
@@ -368,9 +403,8 @@ and to search the file with the host only.
 Only machine name, user name and password are taken into account
 (init macros and similar things aren't supported).
 
-\fBNote:\fP libcurl does not verify that the file has the correct properties
-set (as the standard Unix ftp client does). It should only be readable by
-user.
+libcurl does not verify that the file has the correct properties set (as the
+standard Unix ftp client does). It should only be readable by user.
 .IP CURLOPT_NETRC_FILE
 Pass a char * as parameter, pointing to a zero terminated string containing
 the full path name to the file you want libcurl to use as .netrc file. If this
@@ -380,6 +414,11 @@ find the a .netrc file in the current user's home directory. (Added in 7.10.9)
 Pass a char * as parameter, which should be [user name]:[password] to use for
 the connection. Use \fICURLOPT_HTTPAUTH\fP to decide authentication method.
 
+When using NTLM, you can set domain by prepending it to the user name and
+separating the domain and name with a forward (/) or backward slash (\\). Like
+this: "domain/user:password" or "domain\\user:password". Some HTTP servers (on
+Windows) support this style even for Basic authentication.
+
 When using HTTP and \fICURLOPT_FOLLOWLOCATION\fP, libcurl might perform
 several requests to possibly different hosts. libcurl will only send this user
 and password information to hosts using the initial host name (unless
@@ -395,9 +434,9 @@ Pass a long as parameter, which is set to a bitmask, to tell libcurl what
 authentication method(s) you want it to use. The available bits are listed
 below. If more than one bit is set, libcurl will first query the site to see
 what authentication methods it supports and then pick the best one you allow
-it to use. Note that for some methods, this will induce an extra network
-round-trip. Set the actual name and password with the \fICURLOPT_USERPWD\fP
-option. (Added in 7.10.6)
+it to use. For some methods, this will induce an extra network round-trip. Set
+the actual name and password with the \fICURLOPT_USERPWD\fP option. (Added in
+7.10.6)
 .RS
 .IP CURLAUTH_BASIC
 HTTP Basic authentication. This is the default choice, and the only method
@@ -415,15 +454,14 @@ applications. It is primarily meant as a support for Kerberos5 authentication
 but may be also used along with another authentication methods. For more
 information see IETF draft draft-brezak-spnego-http-04.txt.
 
-\fBNOTE\fP that you need to build libcurl with a suitable GSS-API library for
-this to work.
+You need to build libcurl with a suitable GSS-API library for this to work.
 .IP CURLAUTH_NTLM
 HTTP NTLM authentication. A proprietary protocol invented and used by
 Microsoft. It uses a challenge-response and hash concept similar to Digest, to
 prevent the password from being eavesdropped.
 
-\fBNOTE\fP that you need to build libcurl with SSL support for this option to
-work.
+You need to build libcurl with OpenSSL support for this option to work, or
+build libcurl on Windows.
 .IP CURLAUTH_ANY
 This is a convenience macro that sets all bits and thus makes libcurl pick any
 it finds suitable. libcurl will automatically select the one it finds most
@@ -438,11 +476,11 @@ Pass a long as parameter, which is set to a bitmask, to tell libcurl what
 authentication method(s) you want it to use for your proxy authentication.  If
 more than one bit is set, libcurl will first query the site to see what
 authentication methods it supports and then pick the best one you allow it to
-use. Note that for some methods, this will induce an extra network
-round-trip. Set the actual name and password with the
-\fICURLOPT_PROXYUSERPWD\fP option. The bitmask can be constructed by or'ing
-together the bits listed above for the \fICURLOPT_HTTPAUTH\fP option. As of
-this writing, only Basic, Digest and NTLM work. (Added in 7.10.7)
+use. For some methods, this will induce an extra network round-trip. Set the
+actual name and password with the \fICURLOPT_PROXYUSERPWD\fP option. The
+bitmask can be constructed by or'ing together the bits listed above for the
+\fICURLOPT_HTTPAUTH\fP option. As of this writing, only Basic, Digest and NTLM
+work. (Added in 7.10.7)
 .SH HTTP OPTIONS
 .IP CURLOPT_AUTOREFERER
 Pass a non-zero parameter to enable this. When enabled, libcurl will
@@ -465,19 +503,21 @@ lib/README.encoding for details.
 A non-zero parameter tells the library to follow any Location: header that the
 server sends as part of an HTTP header.
 
-\fBNOTE:\fP this means that the library will re-send the same request on the
-new location and follow new Location: headers all the way until no more such
-headers are returned. \fICURLOPT_MAXREDIRS\fP can be used to limit the number
-of redirects libcurl will follow.
+This means that the library will re-send the same request on the new location
+and follow new Location: headers all the way until no more such headers are
+returned. \fICURLOPT_MAXREDIRS\fP can be used to limit the number of redirects
+libcurl will follow.
 .IP CURLOPT_UNRESTRICTED_AUTH
 A non-zero parameter tells the library it can continue to send authentication
-(user+password) when following locations, even when hostname changed. Note
-that this is meaningful only when setting \fICURLOPT_FOLLOWLOCATION\fP.
+(user+password) when following locations, even when hostname changed. This
+option is meaningful only when setting \fICURLOPT_FOLLOWLOCATION\fP.
 .IP CURLOPT_MAXREDIRS
 Pass a long. The set number will be the redirection limit. If that many
 redirections have been followed, the next redirect will cause an error
 (\fICURLE_TOO_MANY_REDIRECTS\fP). This option only makes sense if the
-\fICURLOPT_FOLLOWLOCATION\fP is used at the same time.
+\fICURLOPT_FOLLOWLOCATION\fP is used at the same time. Added in 7.15.1:
+Setting the limit to 0 will make libcurl refuse any redirect. Set it to -1 for
+an infinite number of redirects (which is the default)
 .IP CURLOPT_PUT
 A non-zero parameter tells the library to use HTTP PUT to transfer data. The
 data should be set with \fICURLOPT_READDATA\fP and \fICURLOPT_INFILESIZE\fP.
@@ -511,8 +551,11 @@ adding a header like "Transfer-Encoding: chunked" with
 \fICURLOPT_HTTPHEADER\fP. With HTTP 1.0 or without chunked transfer, you must
 specify the size in the request.
 
-NOTE: if you have issued a POST request and want to make a HEAD or GET
-instead, you must explictly pick the new request type using
+When setting \fICURLOPT_POST\fP to a non-zero value, it will automatically set
+\fICURLOPT_NOBODY\fP to 0 (since 7.14.1).
+
+If you issue a POST request and then want to make a HEAD or GET using the same
+re-used handle, you must explictly set the new request type using
 \fICURLOPT_NOBODY\fP or \fICURLOPT_HTTPGET\fP or similar.
 .IP CURLOPT_POSTFIELDS
 Pass a char * as parameter, which should be the full data to post in an HTTP
@@ -528,8 +571,8 @@ commonly used one by HTML forms. See also the \fICURLOPT_POST\fP. Using
 Using POST with HTTP 1.1 implies the use of a "Expect: 100-continue" header.
 You can disable this header with \fICURLOPT_HTTPHEADER\fP as usual.
 
-\fBNote:\fP to make multipart/formdata posts (aka rfc1867-posts), check out
-the \fICURLOPT_HTTPPOST\fP option.
+To make multipart/formdata posts (aka rfc1867-posts), check out the
+\fICURLOPT_HTTPPOST\fP option.
 .IP CURLOPT_POSTFIELDSIZE
 If you want to post data to the server without letting libcurl do a strlen()
 to measure the data size, this option must be used. When this option is used
@@ -550,6 +593,9 @@ must remain intact until you close this curl handle again with
 
 Using POST with HTTP 1.1 implies the use of a "Expect: 100-continue" header.
 You can disable this header with \fICURLOPT_HTTPHEADER\fP as usual.
+
+When setting \fICURLOPT_HTTPPOST\fP, it will automatically set
+\fICURLOPT_NOBODY\fP to 0 (since 7.14.1).
 .IP CURLOPT_REFERER
 Pass a pointer to a zero terminated string as parameter. It will be used to
 set the Referer: header in the http request sent to the remote server. This
@@ -581,7 +627,7 @@ request-line are headers.
 
 Pass a NULL to this to reset back to no custom headers.
 
-\fBNOTE:\fP The most commonly replaced headers have "shortcuts" in the options
+The most commonly replaced headers have "shortcuts" in the options
 \fICURLOPT_COOKIE\fP, \fICURLOPT_USERAGENT\fP and \fICURLOPT_REFERER\fP.
 .IP CURLOPT_HTTP200ALIASES
 Pass a pointer to a linked list of aliases to be treated as valid HTTP 200
@@ -594,9 +640,9 @@ The linked list should be a fully valid list of struct curl_slist structs, and
 be properly filled in.  Use \fIcurl_slist_append(3)\fP to create the list and
 \fIcurl_slist_free_all(3)\fP to clean up an entire list.
 
-\fBNOTE:\fP The alias itself is not parsed for any version strings.  So if your
-alias is "MYHTTP/9.9", Libcurl will not treat the server as responding with
-HTTP version 9.9.  Instead Libcurl will use the value set by option
+The alias itself is not parsed for any version strings.  So if your alias is
+\&"MYHTTP/9.9", Libcurl will not treat the server as responding with HTTP
+version 9.9.  Instead Libcurl will use the value set by option
 \fICURLOPT_HTTP_VERSION\fP.
 .IP CURLOPT_COOKIE
 Pass a pointer to a zero terminated string as parameter. It will be used to
@@ -620,6 +666,9 @@ dumped to a file.
 Given an empty or non-existing file or by passing the empty string (""), this
 option will enable cookies for this curl handle, making it understand and
 parse received cookies and then use matching cookies in future request.
+
+If you use this option multiple times, you just add more files to read.
+Subsequent files will add more cookies.
 .IP CURLOPT_COOKIEJAR
 Pass a file name as char *, zero terminated. This will make libcurl write all
 internally known cookies to the specified file when \fIcurl_easy_cleanup(3)\fP
@@ -628,7 +677,7 @@ instead have the cookies written to stdout. Using this option also enables
 cookies for this session, so if you for example follow a location it will make
 matching cookies get sent accordingly.
 
-\fBNOTE:\fP If the cookie jar file can't be created or written to (when the
+If the cookie jar file can't be created or written to (when the
 \fIcurl_easy_cleanup(3)\fP is called), libcurl will not and cannot report an
 error for this. Using \fICURLOPT_VERBOSE\fP or \fICURLOPT_DEBUGFUNCTION\fP
 will get a warning to display, but that is the only visible feedback you get
@@ -640,10 +689,18 @@ cookies" from the previous session. By default, libcurl always stores and
 loads all cookies, independent if they are session cookies are not. Session
 cookies are cookies without expiry date and they are meant to be alive and
 existing for this "session" only.
+.IP CURLOPT_COOKIELIST
+Pass a char * to a cookie string. Cookie can be either in Netscape / Mozilla
+format or just regular HTTP-style header (Set-Cookie: ...) format. If cURL
+cookie engine was not enabled it will enable its cookie engine.  Passing a
+magic string \&"ALL" will erase all cookies known by cURL. (Added in 7.14.1)
 .IP CURLOPT_HTTPGET
 Pass a long. If the long is non-zero, this forces the HTTP request to get back
 to GET. usable if a POST, HEAD, PUT or a custom request have been used
 previously using the same curl handle.
+
+When setting \fICURLOPT_HTTPGET\fP to a non-zero value, it will automatically
+set \fICURLOPT_NOBODY\fP to 0 (since 7.14.1).
 .IP CURLOPT_HTTP_VERSION
 Pass a long, set to one of the values described below. They force libcurl to
 use the specific HTTP versions. This is not sensible to do unless you have a
@@ -656,6 +713,12 @@ it thinks fit.
 Enforce HTTP 1.0 requests.
 .IP CURL_HTTP_VERSION_1_1
 Enforce HTTP 1.1 requests.
+.IP CURLOPT_IGNORE_CONTENT_LENGTH
+Ignore the Content-Length header. This is useful for Apache 1.x (and similar
+servers) which will report incorrect content length for files over 2
+gigabytes. If this option is used, curl will not be able to accurately report
+progress, and will simply stop the download when the server ends the
+connection. (added in 7.14.1)
 .RE
 .SH FTP OPTIONS
 .IP CURLOPT_FTPPORT
@@ -721,11 +784,19 @@ directory. (Added in 7.10.7)
 .IP CURLOPT_FTP_RESPONSE_TIMEOUT
 Pass a long.  Causes curl to set a timeout period (in seconds) on the amount
 of time that the server is allowed to take in order to generate a response
-message for a command before the session is considered hung.  Note that while
-curl is waiting for a response, this value overrides \fICURLOPT_TIMEOUT\fP. It
-is recommended that if used in conjunction with \fICURLOPT_TIMEOUT\fP, you set
+message for a command before the session is considered hung.  While curl is
+waiting for a response, this value overrides \fICURLOPT_TIMEOUT\fP. It is
+recommended that if used in conjunction with \fICURLOPT_TIMEOUT\fP, you set
 \fICURLOPT_FTP_RESPONSE_TIMEOUT\fP to a value smaller than
 \fICURLOPT_TIMEOUT\fP.  (Added in 7.10.8)
+.IP CURLOPT_FTP_SKIP_PASV_IP
+Pass a long. If set to a non-zero value, it instructs libcurl to not use the
+IP address the server suggests in its 227-response to libcurl's PASV command
+when libcurl connects the data connection. Instead libcurl will re-use the
+same IP address it already uses for the control connection. But it will use
+the port number from the 227-response. (Added in 7.14.2)
+
+This option has no effect if PORT, EPRT or EPSV is used instead of PASV.
 .IP CURLOPT_FTP_SSL
 Pass a long using one of the values from below, to make libcurl use your
 desired level of SSL for the ftp transfer. (Added in 7.11.0)
@@ -770,11 +841,14 @@ this data is sent off using the ACCT command. (Added in 7.13.0)
 .SH PROTOCOL OPTIONS
 .IP CURLOPT_TRANSFERTEXT
 A non-zero parameter tells the library to use ASCII mode for ftp transfers,
-instead of the default binary transfer. For LDAP transfers it gets the data in
-plain text instead of HTML and for win32 systems it does not set the stdout to
-binary mode. This option can be usable when transferring text data between
-systems with different views on certain characters, such as newlines or
-similar.
+instead of the default binary transfer. For win32 systems it does not set the
+stdout to binary mode. This option can be usable when transferring text data
+between systems with different views on certain characters, such as newlines
+or similar.
+
+libcurl does not do a complete ASCII conversion when doing ASCII transfers
+over FTP. This is a known limitation/flaw that nobody has rectified. libcurl
+simply sets the mode to ascii and performs a standard transfer.
 .IP CURLOPT_CRLF
 Convert Unix newlines to CRLF newlines on transfers.
 .IP CURLOPT_RANGE
@@ -800,11 +874,11 @@ server supports the command first.
 
 Restore to the internal default by setting this to NULL.
 
-\fBNOTE:\fP Many people have wrongly used this option to replace the entire
-request with their own, including multiple headers and POST contents. While
-that might work in many cases, it will cause libcurl to send invalid requests
-and it could possibly confuse the remote server badly. Use \fICURLOPT_POST\fP
-and \fICURLOPT_POSTFIELDS\fP to set POST data. Use \fICURLOPT_HTTPHEADER\fP to
+Many people have wrongly used this option to replace the entire request with
+their own, including multiple headers and POST contents. While that might work
+in many cases, it will cause libcurl to send invalid requests and it could
+possibly confuse the remote server badly. Use \fICURLOPT_POST\fP and
+\fICURLOPT_POSTFIELDS\fP to set POST data. Use \fICURLOPT_HTTPHEADER\fP to
 replace or extend the set of headers sent by libcurl. Use
 \fICURLOPT_HTTP_VERSION\fP to change HTTP version.
 .IP CURLOPT_FILETIME
@@ -818,9 +892,8 @@ A non-zero parameter tells the library to not include the body-part in the
 output. This is only relevant for protocols that have separate header and body
 parts. On HTTP(S) servers, this will make libcurl do a HEAD request.
 
-To change back to GET, you should use \fICURLOPT_HTTPGET\fP. To change back to
-POST, you should use \fICURLOPT_POST\fP. Setting \fICURLOPT_NOBODY\fP to zero
-has no effect.
+To change request to GET, you should use \fICURLOPT_HTTPGET\fP. Change request
+to POST with \fICURLOPT_POST\fP etc.
 .IP CURLOPT_INFILESIZE
 When uploading a file to a remote site, this option should be used to tell
 libcurl what the expected size of the infile is. This value should be passed
@@ -849,26 +922,26 @@ Pass a long as parameter. This allows you to specify the maximum size (in
 bytes) of a file to download. If the file requested is larger than this value,
 the transfer will not start and CURLE_FILESIZE_EXCEEDED will be returned.
 
-\fBNOTE:\fP The file size is not always known prior to download, and for such
-files this option has no effect even if the file transfer ends up being larger
-than this given limit. This concerns both FTP and HTTP transfers.
+The file size is not always known prior to download, and for such files this
+option has no effect even if the file transfer ends up being larger than this
+given limit. This concerns both FTP and HTTP transfers.
 .IP CURLOPT_MAXFILESIZE_LARGE
 Pass a curl_off_t as parameter. This allows you to specify the maximum size
 (in bytes) of a file to download. If the file requested is larger than this
 value, the transfer will not start and \fICURLE_FILESIZE_EXCEEDED\fP will be
 returned. (Added in 7.11.0)
 
-\fBNOTE:\fP The file size is not always known prior to download, and for such
-files this option has no effect even if the file transfer ends up being larger
-than this given limit. This concerns both FTP and HTTP transfers.
+The file size is not always known prior to download, and for such files this
+option has no effect even if the file transfer ends up being larger than this
+given limit. This concerns both FTP and HTTP transfers.
 .IP CURLOPT_TIMECONDITION
 Pass a long as parameter. This defines how the \fICURLOPT_TIMEVALUE\fP time
 value is treated. You can set this parameter to \fICURL_TIMECOND_IFMODSINCE\fP
 or \fICURL_TIMECOND_IFUNMODSINCE\fP. This feature applies to HTTP and FTP.
 
-\fBNOTE:\fP The last modification time of a file is not always known and in such
-instances this feature will have no effect even if the given time condition
-would have not been met.
+The last modification time of a file is not always known and in such instances
+this feature will have no effect even if the given time condition would have
+not been met.
 .IP CURLOPT_TIMEVALUE
 Pass a long as parameter. This should be the time in seconds since 1 jan 1970,
 and the time will be used in a condition as specified with
@@ -881,8 +954,8 @@ considerable time and limiting operations to less than a few minutes risk
 aborting perfectly normal operations. This option will cause curl to use the
 SIGALRM to enable time-outing system calls.
 
-\fBNOTE:\fP this is not recommended to use in unix multi-threaded programs, as
-it uses signals unless \fICURLOPT_NOSIGNAL\fP (see above) is set.
+In unix-like systems, this might cause signals to be used unless
+\fICURLOPT_NOSIGNAL\fP is set.
 .IP CURLOPT_LOW_SPEED_LIMIT
 Pass a long as parameter. It contains the transfer speed in bytes per second
 that the transfer should be below during \fICURLOPT_LOW_SPEED_TIME\fP seconds
@@ -903,9 +976,9 @@ When reaching the maximum limit, curl uses the \fICURLOPT_CLOSEPOLICY\fP to
 figure out which of the existing connections to close to prevent the number of
 open connections to increase.
 
-\fBNOTE:\fP if you already have performed transfers with this curl handle,
-setting a smaller MAXCONNECTS than before may cause open connections to get
-closed unnecessarily.
+If you already have performed transfers with this curl handle, setting a
+smaller MAXCONNECTS than before may cause open connections to get closed
+unnecessarily.
 .IP CURLOPT_CLOSEPOLICY
 Pass a long. This option sets what policy libcurl should use when the
 connection cache is filled and one of the open connections has to be closed to
@@ -937,8 +1010,8 @@ it has connected, this option is of no more use. Set to zero to disable
 connection timeout (it will then only timeout on the system's internal
 timeouts). See also the \fICURLOPT_TIMEOUT\fP option.
 
-\fBNOTE:\fP this is not recommended to use in unix multi-threaded programs, as
-it uses signals unless \fICURLOPT_NOSIGNAL\fP (see above) is set.
+In unix-like systems, this might cause signals to be used unless
+\fICURLOPT_NOSIGNAL\fP is set.
 .IP CURLOPT_IPRESOLVE
 Allows an application to select what kind of IP addresses to use when
 resolving host names. This is only interesting when using host names that
@@ -975,9 +1048,9 @@ changed with \fICURLOPT_SSLKEYTYPE\fP.
 Pass a pointer to a zero terminated string as parameter. The string should be
 the format of your private key. Supported formats are "PEM", "DER" and "ENG".
 
-\fBNOTE:\fP The format "ENG" enables you to load the private key from a crypto
-engine. In this case \fICURLOPT_SSLKEY\fP is used as an identifier passed to
-the engine. You have to set the crypto engine with \fICURLOPT_SSLENGINE\fP.
+The format "ENG" enables you to load the private key from a crypto engine. In
+this case \fICURLOPT_SSLKEY\fP is used as an identifier passed to the
+engine. You have to set the crypto engine with \fICURLOPT_SSLENGINE\fP.
 \&"DER" format key file currently does not work because of a bug in OpenSSL.
 .IP CURLOPT_SSLKEYPASSWD
 Pass a pointer to a zero terminated string as parameter. It will be used as
@@ -987,14 +1060,14 @@ Pass a pointer to a zero terminated string as parameter. It will be used as
 the identifier for the crypto engine you want to use for your private
 key.
 
-\fBNOTE:\fP If the crypto device cannot be loaded,
-\fICURLE_SSL_ENGINE_NOTFOUND\fP is returned.
+If the crypto device cannot be loaded, \fICURLE_SSL_ENGINE_NOTFOUND\fP is
+returned.
 .IP CURLOPT_SSLENGINE_DEFAULT
 Sets the actual crypto engine as the default for (asymmetric) crypto
 operations.
 
-\fBNOTE:\fP If the crypto device cannot be set,
-\fICURLE_SSL_ENGINE_SETFAILED\fP is returned.
+If the crypto device cannot be set, \fICURLE_SSL_ENGINE_SETFAILED\fP is
+returned.
 .IP CURLOPT_SSLVERSION
 Pass a long as parameter to control what version of SSL/TLS to attempt to use.
 The available options are:
@@ -1060,26 +1133,25 @@ socket. It will be used to seed the random engine for SSL.
 .IP CURLOPT_SSL_VERIFYHOST
 Pass a long as parameter.
 
-This option determines whether curl verifies that the server claims to be
-who you want it to be.
+This option determines whether libcurl verifies that the server cert is for
+the server it is known as.
 
-When negotiating an SSL connection, the server sends a certificate
-indicating its identity.
+When negotiating an SSL connection, the server sends a certificate indicating
+its identity.
 
-When \fICURLOPT_SSL_VERIFYHOST\fP is 2, that certificate must indicate
-that the server is the server to which you meant to connect, or the
-connection fails.
+When \fICURLOPT_SSL_VERIFYHOST\fP is 2, that certificate must indicate that
+the server is the server to which you meant to connect, or the connection
+fails.
 
-Curl considers the server the intended one when the Common Name field
-or a Subject Alternate Name field in the certificate matches the host
-name in the URL to which you told Curl to connect.
+Curl considers the server the intended one when the Common Name field or a
+Subject Alternate Name field in the certificate matches the host name in the
+URL to which you told Curl to connect.
 
-When the value is 1, the certificate must contain a Common Name field,
-but it doesn't matter what name it says.  (This is not ordinarily a
-useful setting).
+When the value is 1, the certificate must contain a Common Name field, but it
+doesn't matter what name it says.  (This is not ordinarily a useful setting).
 
-When the value is 0, the connection succeeds regardless of the names in
-the certificate.
+When the value is 0, the connection succeeds regardless of the names in the
+certificate.
 
 The default, since 7.10, is 2.
 

docs/libcurl/curl_escape.3

@@ -23,4 +23,4 @@ You must curl_free() the returned string when you're done with it.
 .SH RETURN VALUE
 A pointer to a zero terminated string or NULL if it failed.
 .SH "SEE ALSO"
-.BR curl_unescape(3), curl_free(3), RFC 2396
+.BR curl_unescape "(3), " curl_free "(3), " RFC 2396

docs/libcurl/curl_formadd.3

@@ -90,7 +90,7 @@ followed by a pointer to a string to a name, will make libcurl use the given
 name in the file upload part, instead of the actual file name given to
 \fICURLFORM_FILE\fP.
 
-.IP BCURLFORM_BUFFER
+.IP CURLFORM_BUFFER
 followed by a string, tells libcurl that a buffer is to be used to upload data
 instead of using a file. The given string is used as the value of the file
 name field in the content header.

docs/libcurl/curl_getdate.3

@@ -2,7 +2,7 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH curl_getdate 3 "5 March 2001" "libcurl 7.0" "libcurl Manual"
+.TH curl_getdate 3 "12 Aug 2005" "libcurl 7.0" "libcurl Manual"
 .SH NAME
 curl_getdate - Convert an date string to number of seconds since January 1,
 1970
@@ -26,7 +26,7 @@ order of the items is immaterial.  A date string may contain many flavors of
 items:
 .TP 0.8i
 .B calendar date items
-Can be specified several ways. Month names can only be three-letter
+Can be specified several ways. Month names can only be three-letter english
 abbrivations, numbers can be zero-prefixed and the year may use 2 or 4 digits.
 Examples: 06 Nov 1994, 06-Nov-94 and Nov-94 6.
 .TP
@@ -94,7 +94,7 @@ crippled mktime(), \fIcurl_getdate\fP will return -1 in this case.
 .SH REWRITE
 The former version of this function was built with yacc and was not only very
 large, it was also never quite understood and it wasn't possible to build with
-non-GNU tools since only Bison could make it thread-safe!
+non-GNU tools since only GNU Bison could make it thread-safe!
 
 The rewrite was done for 7.12.2. The new one is much smaller and use simpler
 code.

docs/libcurl/getinfo-times

@@ -0,0 +1,27 @@
+An overview of the six time values available from curl_easy_getinfo()
+
+curk_easy_perform()
+    |
+    |--NT
+    |--|--CT
+    |--|--|--PT
+    |--|--|--|--ST
+          |--|--|--TT
+    |--|--|--|--|--RT
+
+NT = CURLINFO_NAMELOOKUP_TIME. The time it took from the start until the name
+     resolving was completed.
+CT = CURLINFO_CONNECT_TIME. The time it took from the start until the connect
+     to the remote host (or proxy) was completed.
+PT = CURLINFO_PRETRANSFER_TIME. The time it took from the start until the file
+     transfer is just about to begin. This includes all pre-transfer commands
+     and negotiations that are specific to the particular protocol(s)
+     involved.
+ST = CURLINFO_STARTTRANSFER_TIME. The time it took from the start until the
+     first byte is just about to be transferred.
+TT = CURLINFO_TOTAL_TIME. Time of the previous transfer. This time does not
+     include the connect time (CT), so if you want the complete operation
+     time, you should add that.
+RT = CURLINFO_REDIRECT_TIME. The time it took for all redirection steps
+     include name lookup, connect, pretransfer and transfer before final
+     transaction was started. So, this is zero if no redirection took place.

docs/libcurl/libcurl-errors.3

@@ -196,8 +196,7 @@ Initiating the SSL Engine failed
 The remote server denied curl to login (Added in 7.13.1)
 .SH "CURLMcode"
 This is the generic return code used by functions in the libcurl multi
-interface. Also consider \fIcurl_multi_strerror(3)\fI.
-
+interface. Also consider \fIcurl_multi_strerror(3)\fP.
 .IP "CURLM_CALL_MULTI_PERFORM (-1)"
 This is not really an error. It means you should call
 \fIcurl_multi_perform(3)\fP again without doing select() or similar in between.
@@ -213,9 +212,7 @@ You are doomed.
 This can only be returned if libcurl bugs. Please report it to us!
 .SH "CURLSHcode"
 The "share" interface will return a CURLSHcode to indicate when an error has
-occurred.  Also consider \fIcurl_share_strerror(3)\fI.
-
-CURLSHcode is one of the following:
+occurred.  Also consider \fIcurl_share_strerror(3)\fP.
 .IP "CURLSHE_OK (0)"
 All fine. Proceed as usual.
 .IP "CURLSHE_BAD_OPTION (1)"

docs/libcurl/libcurl-tutorial.3

@@ -243,7 +243,7 @@ where it'll store a human readable error message as well.
 If you then want to transfer another file, the handle is ready to be used
 again. Mind you, it is even preferred that you re-use an existing handle if
 you intend to make another transfer. libcurl will then attempt to re-use the
-previous
+previous connection.
 
 .SH "Multi-threading Issues"
 The first basic rule is that you must \fBnever\fP share a libcurl handle (be

docs/libcurl/libcurl.m4

@@ -1,7 +1,7 @@
 # LIBCURL_CHECK_CONFIG ([DEFAULT-ACTION], [MINIMUM-VERSION],
 #                       [ACTION-IF-YES], [ACTION-IF-NO])
 # ----------------------------------------------------------
-#      David Shaw <dshaw@jabberwocky.com>   Jan-23-2005
+#      David Shaw <dshaw@jabberwocky.com>   Jun-21-2005
 #
 # Checks for libcurl.  DEFAULT-ACTION is the string yes or no to
 # specify whether to default to --with-libcurl or --without-libcurl.
@@ -32,13 +32,7 @@
 # found is after version 7.7.2, the first version that included the
 # curl-config script.  Note that it is very important for people
 # packaging binary versions of libcurl to include this script!
-# Without curl-config, we can only make educated guesses as to what
-# protocols are available.  Specifically, we assume that all of HTTP,
-# FTP, GOPHER, FILE, TELNET, LDAP, and DICT exist, and (if SSL exists)
-# HTTPS is present.  All of these protocols existed when libcurl was
-# first created in version 7, so this is a safe assumption.  If the
-# version is 7.11.0 or later, FTPS is assumed to be present as well.
-# FTPS existed before then, but was not yet fully standards compliant.
+# Without curl-config, we can only guess what protocols are available.
 
 AC_DEFUN([LIBCURL_CHECK_CONFIG],
 [
@@ -103,6 +97,15 @@ AC_DEFUN([LIBCURL_CHECK_CONFIG],
            fi
            if test x"$LIBCURL" = "x" ; then
               LIBCURL=`$_libcurl_config --libs`
+
+              # This is so silly, but Apple actually has a bug in their
+	      # curl-config script.  Fixed in Tiger, but there are still
+	      # lots of Panther installs around.
+              case "${host}" in
+                 powerpc-apple-darwin7*)
+                    LIBCURL=`echo $LIBCURL | sed -e 's|-arch i386||g'`
+                 ;;
+              esac
            fi
 
 	   # All curl-config scripts support --feature
@@ -130,8 +133,8 @@ AC_DEFUN([LIBCURL_CHECK_CONFIG],
            [
            _libcurl_save_cppflags=$CPPFLAGS
            CPPFLAGS="$CPPFLAGS $LIBCURL_CPPFLAGS"
-           _libcurl_save_ldflags=$LDFLAGS
-           LDFLAGS="$LDFLAGS $LIBCURL"
+           _libcurl_save_libs=$LIBS
+           LIBS="$LIBS $LIBCURL"
 
            AC_LINK_IFELSE(AC_LANG_PROGRAM([#include <curl/curl.h>],[
 /* Try and use a few common options to force a failure if we are
@@ -147,12 +150,30 @@ x=CURLOPT_VERBOSE;
 ]),libcurl_cv_lib_curl_usable=yes,libcurl_cv_lib_curl_usable=no)
 
            CPPFLAGS=$_libcurl_save_cppflags
-           LDFLAGS=$_libcurl_save_ldflags
+           LIBS=$_libcurl_save_libs
            unset _libcurl_save_cppflags
-           unset _libcurl_save_ldflags
+           unset _libcurl_save_libs
            ])
 
         if test $libcurl_cv_lib_curl_usable = yes ; then
+
+	   # Does curl_free() exist in this version of libcurl?
+	   # If not, fake it with free()
+
+           _libcurl_save_cppflags=$CPPFLAGS
+           CPPFLAGS="$CPPFLAGS $LIBCURL_CPPFLAGS"
+           _libcurl_save_libs=$LIBS
+           LIBS="$LIBS $LIBCURL"
+
+           AC_CHECK_FUNC(curl_free,,
+  	      AC_DEFINE(curl_free,free,
+		[Define curl_free() as free() if our version of curl lacks curl_free.]))
+
+           CPPFLAGS=$_libcurl_save_cppflags
+           LIBS=$_libcurl_save_libs
+           unset _libcurl_save_cppflags
+           unset _libcurl_save_libs
+
            AC_DEFINE(HAVE_LIBCURL,1,
              [Define to 1 if you have a functional curl library.])
            AC_SUBST(LIBCURL_CPPFLAGS)

hiper/Makefile

@@ -0,0 +1,20 @@
+#
+# Build a little app for the Hiper project
+# During dev at least, we use a static libcurl.
+#
+
+LDFLAGS = -lcrypt -lidn -lssl -lcrypto -ldl -lz -lresolv -L../ares/.libs -lcares
+LIBCURL = -L../lib/.libs/ -lcurl
+CFLAGS = -I../include -g -DHAVE_CURL_MULTI_SOCKET
+
+hiper: hiper.o $(LIBCURL)
+	$(CC) -o $@ $< $(LIBCURL) $(LDFLAGS)
+
+hiper.o: hiper.c
+	$(CC) $(CFLAGS) -c $<
+
+clean:
+	rm hiper.o hiper
+
+$(LIBCURL):
+	(cd ../lib && make)

hiper/collecturls.pl

@@ -0,0 +1,34 @@
+#!/usr/bin/perl
+
+# 1) http://randomurl.com/body.php
+# 2) http://random.yahoo.com/fast/ryl
+# 3) http://www.uroulette.com/visit
+
+# 1) very slow, responds with URL in body meta style:
+# <meta http-equiv="refresh" content="0; url=http://www.webmasterworld.com/forum85/735.htm">
+
+# 2) Responds with non-HTTP headers like:
+# Status: 301
+# Location: http://www.adaptive.net/
+
+# 3) ordinary 30X code and Location:
+
+my $url;
+map { $url .= " http://www.uroulette.com/visit"; } (1 .. 12);
+
+print $url."\n";
+
+my $count=0;
+
+open(DUMP, ">>dump");
+
+while(1) {
+    my @getit = `curl -si $url`;
+    for my $l (@getit) {
+        if($l =~ /^Location: (.*)/) {
+            print DUMP "$1\n";
+            print STDERR "$count\r";
+            $count++;
+        }
+    }
+}

hiper/hiper.c

@@ -0,0 +1,377 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * Connect to N sites simultanouesly and download data.
+ *
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <sys/time.h>
+#include <time.h>
+#include <unistd.h>
+#include <sys/poll.h>
+
+#include <curl/curl.h>
+
+/* The number of simultanoues connections/transfers we do */
+#define NCONNECTIONS 2000
+
+/* The least number of connections we are interested in, so when we go below
+   this amount we can just as well stop */
+#define NMARGIN 50
+
+/* Number of loops (seconds) we allow the total download amount and alive
+   connections to remain the same until we bail out. Set this slightly higher
+   when using asynch supported libcurl. */
+#define IDLE_TIME 10
+
+struct globalinfo {
+  size_t dlcounter;
+};
+
+struct connection {
+  CURL *e;
+  int id; /* just a counter for easy browsing */
+  char url[80];
+  size_t dlcounter;
+  struct globalinfo *global;
+};
+
+static size_t
+writecallback(void *ptr, size_t size, size_t nmemb, void *data)
+{
+  size_t realsize = size * nmemb;
+  struct connection *c = (struct connection *)data;
+
+  c->dlcounter += realsize;
+  c->global->dlcounter += realsize;
+
+#if 0
+  printf("%02d: %d, total %d\n",
+         c->id, c->dlcounter, c->global->dlcounter);
+#endif
+  return realsize;
+}
+
+/* return the diff between two timevals, in us */
+static long tvdiff(struct timeval *newer, struct timeval *older)
+{
+  return (newer->tv_sec-older->tv_sec)*1000000+
+    (newer->tv_usec-older->tv_usec);
+}
+
+
+/* store the start time of the program in this variable */
+static struct timeval timer;
+
+static void timer_start(void)
+{
+  /* capture the time of the start moment */
+  gettimeofday(&timer, NULL);
+}
+
+static struct timeval cont; /* at this moment we continued */
+
+int still_running; /* keep number of running handles */
+
+struct conncount {
+  long time_us;
+  long laps;
+  long maxtime;
+};
+
+struct conncount timecount[NCONNECTIONS+1];
+
+static struct timeval timerpause;
+static void timer_pause(void)
+{
+  /* capture the time of the pause moment */
+  gettimeofday(&timerpause, NULL);
+
+  /* If we have a previous continue (all times except the first), we can now
+     store the time for a whole "lap" */
+  if(cont.tv_sec) {
+    long lap;
+
+    lap = tvdiff(&timerpause, &cont);
+
+    timecount[still_running].time_us += lap;
+    timecount[still_running].laps++; /* number of times added */
+
+    if(lap > timecount[still_running].maxtime) {
+      timecount[still_running].maxtime = lap;
+    }
+  }
+}
+
+static long paused; /* amount of us we have been pausing */
+
+static void timer_continue(void)
+{
+  /* Capture the time of the restored operation moment, now calculate how long
+     time we were paused and added that to the 'paused' variable.
+   */
+  gettimeofday(&cont, NULL);
+
+  paused += tvdiff(&cont, &timerpause);
+}
+
+static long total; /* amount of us from start to stop */
+static void timer_stop(void)
+{
+  struct timeval stop;
+  /* Capture the time of the operation stopped moment, now calculate how long
+     time we were running and how much of that pausing.
+   */
+  gettimeofday(&stop, NULL);
+
+  total = tvdiff(&stop, &timer);
+}
+
+struct globalinfo info;
+struct connection conns[NCONNECTIONS];
+
+long selects;
+long selectsalive;
+long timeouts;
+
+long perform;
+long performalive;
+long performselect;
+long topselect;
+
+static void report(void)
+{
+  int i;
+  long active = total - paused;
+  long numdl = 0;
+
+  for(i=0; i < NCONNECTIONS; i++) {
+    if(conns[i].dlcounter)
+      numdl++;
+  }
+
+  printf("Summary from %d simultanoues transfers:\n",
+         NCONNECTIONS);
+
+  printf("Total time %ldus - Paused %ldus = Active %ldus =\n Active/total"
+         " %ldus\n",
+         total, paused, active, active/NCONNECTIONS);
+
+  printf(" Active/(connections that delivered data) = %ldus\n",
+         active/numdl);
+
+  printf("%d out of %d connections provided data\n", numdl, NCONNECTIONS);
+
+  printf("%d calls to curl_multi_perform(), average %d alive. "
+         "Average time: %dus\n",
+         perform, performalive/perform, active/perform);
+
+  printf("%d calls to select(), average %d alive\n",
+         selects, selectsalive/selects);
+  printf(" Average number of readable connections per select() return: %d\n",
+         performselect/selects);
+  printf(" Max number of readable connections for a single select() "
+         "return: %d\n",
+         topselect);
+
+  printf("%ld select() timeouts\n", timeouts);
+
+  for(i=1; i< NCONNECTIONS; i++) {
+    if(timecount[i].laps) {
+      printf("Time %d connections, average %ld max %ld (%ld laps) average/conn: %ld\n",
+             i,
+             timecount[i].time_us/timecount[i].laps,
+             timecount[i].maxtime,
+             timecount[i].laps,
+             (timecount[i].time_us/timecount[i].laps)/i );
+    }
+  }
+}
+
+int main(int argc, char **argv)
+{
+  CURLM *multi_handle;
+  CURLMsg *msg;
+  CURLcode code = CURLE_OK;
+  CURLMcode mcode = CURLM_OK;
+  int rc;
+  int i;
+  FILE *urls;
+  int startindex=0;
+  char buffer[256];
+
+  int prevalive=-1;
+  int prevsamecounter=0;
+  int prevtotal = -1;
+
+  memset(&info, 0, sizeof(struct globalinfo));
+
+  if(argc < 2) {
+    printf("Usage: hiper [file] [start index]\n");
+    return 1;
+  }
+
+  urls = fopen(argv[1], "r");
+  if(!urls)
+    /* failed to open list of urls */
+    return 1;
+
+  if(argc > 2)
+    startindex = atoi(argv[2]);
+
+  if(startindex) {
+    /* Pass this many lines before we start using URLs from the file. On
+       repeated invokes, try using different indexes to avoid torturing the
+       same servers. */
+    while(startindex--) {
+      if(!fgets(buffer, sizeof(buffer), urls))
+        break;
+    }
+  }
+
+  /* init the multi stack */
+  multi_handle = curl_multi_init();
+
+  for(i=0; i< NCONNECTIONS; i++) {
+    CURL *e;
+    char *nl;
+
+    memset(&conns[i], 0, sizeof(struct connection));
+
+    /* read a line from the file of URLs */
+    if(!fgets(conns[i].url, sizeof(conns[i].url), urls))
+      /* failed to read a line */
+      break;
+
+    /* strip off trailing newlines */
+    nl = strchr(conns[i].url, '\n');
+    if(nl)
+      *nl=0; /* cut */
+
+    printf("%d: Add URL %s\n", i, conns[i].url);
+
+    e  = curl_easy_init();
+    conns[i].e = e;
+    conns[i].id = i;
+    conns[i].global = &info;
+
+    curl_easy_setopt(e, CURLOPT_URL, conns[i].url);
+    curl_easy_setopt(e, CURLOPT_WRITEFUNCTION, writecallback);
+    curl_easy_setopt(e, CURLOPT_WRITEDATA, &conns[i]);
+#if 0
+    curl_easy_setopt(e, CURLOPT_VERBOSE, 1);
+    curl_easy_setopt(e, CURLOPT_ERRORBUFFER, errorbuffer);
+#endif
+
+    /* add the easy to the multi */
+    curl_multi_add_handle(multi_handle, e);
+  }
+
+    /* we start some action by calling perform right away */
+  while(CURLM_CALL_MULTI_PERFORM ==
+        curl_multi_perform(multi_handle, &still_running));
+
+  printf("Starting timer!\n");
+  timer_start();
+
+  while(still_running) {
+    struct timeval timeout;
+    int rc; /* select() return code */
+
+    fd_set fdread;
+    fd_set fdwrite;
+    fd_set fdexcep;
+    int maxfd;
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+
+    /* set a suitable timeout to play around with */
+    timeout.tv_sec = 0;
+    timeout.tv_usec = 50000;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    timer_pause();
+    selects++;
+    selectsalive += still_running;
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    /* Output this here to make it outside the timer */
+    printf("Running: %d (%d bytes)\n", still_running, info.dlcounter);
+
+    timer_continue();
+
+    switch(rc) {
+    case -1:
+      /* select error */
+      break;
+    case 0:
+      timeouts++;
+    default:
+      /* timeout or readable/writable sockets */
+      do {
+        perform++;
+        performalive += still_running;
+      }
+      while(CURLM_CALL_MULTI_PERFORM ==
+            curl_multi_perform(multi_handle, &still_running));
+
+      performselect += rc;
+      if(rc > topselect)
+        topselect = rc;
+      break;
+    }
+    if(still_running < NMARGIN) {
+      printf("Only %d connections left alive, existing\n",
+             still_running);
+      break;
+    }
+
+    if((prevalive == still_running) && (prevtotal == info.dlcounter) &&
+       info.dlcounter) {
+      /* The same amount of still alive transfers as last lap, increase
+         counter. Only do this if _anything_ has been downloaded since it
+         tends to come here during the initial name lookup phase when using
+         asynch DNS libcurl otherwise.
+       */
+      prevsamecounter++;
+
+      if(prevsamecounter >= IDLE_TIME) {
+        /* for the sake of being efficient, we stop the operation when
+           IDLE_TIME has passed without any bytes transfered */
+        printf("Idle time (%d secs) reached (with %d still claimed alive),"
+               " exiting\n",
+               IDLE_TIME, still_running);
+        break;
+      }
+    }
+    else {
+      prevsamecounter=0;
+    }
+    prevalive = still_running;
+    prevtotal = info.dlcounter;
+  }
+
+  timer_stop();
+
+  curl_multi_cleanup(multi_handle);
+
+  /* cleanup all the easy handles */
+  for(i=0; i< NCONNECTIONS; i++)
+    curl_easy_cleanup(conns[i].e);
+
+  report();
+
+  return code;
+}

include/curl/curl.h

@@ -309,6 +309,13 @@ typedef enum {
   CURLE_SSL_ENGINE_INITFAILED,   /* 66 - failed to initialise ENGINE */
   CURLE_LOGIN_DENIED,            /* 67 - user, password or similar was not
                                     accepted and we failed to login */
+  CURLE_TFTP_NOTFOUND,           /* 68 - file not found on server */
+  CURLE_TFTP_PERM,               /* 69 - permission problem on server */
+  CURLE_TFTP_DISKFULL,           /* 70 - out of disk space on server */
+  CURLE_TFTP_ILLEGAL,            /* 71 - Illegal TFTP operation */
+  CURLE_TFTP_UNKNOWNID,          /* 72 - Unknown transfer ID */
+  CURLE_TFTP_EXISTS,             /* 73 - File already exists */
+  CURLE_TFTP_NOSUCHUSER,         /* 74 - No such user */
   CURL_LAST /* never use! */
 } CURLcode;
 
@@ -890,6 +897,21 @@ typedef enum {
      "account" info */
   CINIT(FTP_ACCOUNT, OBJECTPOINT, 134),
 
+  /* feed cookies into cookie engine */
+  CINIT(COOKIELIST, OBJECTPOINT, 135),
+
+  /* ignore Content-Length */
+  CINIT(IGNORE_CONTENT_LENGTH, LONG, 136),
+
+  /* Set to non-zero to skip the IP address received in a 227 PASV FTP server
+     response. Typically used for FTP-SSL purposes but is not restricted to
+     that. libcurl will then instead use the same IP address it used for the
+     control connection. */
+  CINIT(FTP_SKIP_PASV_IP, LONG, 137),
+
+  /* Select "file method" to use when doing FTP */
+  CINIT(FTP_FILEMETHOD, LONG, 138),
+
   CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
@@ -1202,11 +1224,10 @@ CURL_EXTERN void curl_slist_free_all(struct curl_slist *);
  * DESCRIPTION
  *
  * Returns the time, in seconds since 1 Jan 1970 of the time string given in
- * the first argument. The time argument in the second parameter is for cases
- * where the specified time is relative now, like 'two weeks' or 'tomorrow'
- * etc.
+ * the first argument. The time argument in the second parameter is unused
+ * and should be set to NULL.
  */
-CURL_EXTERN time_t curl_getdate(const char *p, const time_t *now);
+CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused);
 
 #define CURLINFO_STRING   0x100000
 #define CURLINFO_LONG     0x200000
@@ -1244,6 +1265,7 @@ typedef enum {
   CURLINFO_OS_ERRNO         = CURLINFO_LONG   + 25,
   CURLINFO_NUM_CONNECTS     = CURLINFO_LONG   + 26,
   CURLINFO_SSL_ENGINES      = CURLINFO_SLIST  + 27,
+  CURLINFO_COOKIELIST       = CURLINFO_SLIST  + 28,
   /* Fill in new entries below here! */
 
   CURLINFO_LASTONE          = 28

include/curl/curlver.h

@@ -28,7 +28,13 @@
 
 /* This is the version number of the libcurl package from which this header
    file origins: */
-#define LIBCURL_VERSION "7.14.0-CVS"
+#define LIBCURL_VERSION "7.15.1-CVS"
+
+/* The numeric version number is also available "in parts" by using these
+   defines: */
+#define LIBCURL_VERSION_MAJOR 7
+#define LIBCURL_VERSION_MINOR 15
+#define LIBCURL_VERSION_PATCH 1
 
 /* This is the numeric version of the libcurl version number, meant for easier
    parsing and comparions by programs. The LIBCURL_VERSION_NUM define will
@@ -37,19 +43,14 @@
          0xXXYYZZ
 
    Where XX, YY and ZZ are the main version, release and patch numbers in
-   hexadecimal. All three numbers are always represented using two digits.  1.2
-   would appear as "0x010200" while version 9.11.7 appears as "0x090b07".
+   hexadecimal (using 8 bits each). All three numbers are always represented
+   using two digits.  1.2 would appear as "0x010200" while version 9.11.7
+   appears as "0x090b07".
 
-   This 6-digit hexadecimal number does not show pre-release number, and it is
-   always a greater number in a more recent release. It makes comparisons with
-   greater than and less than work.
+   This 6-digit (24 bits) hexadecimal number does not show pre-release number,
+   and it is always a greater number in a more recent release. It makes
+   comparisons with greater than and less than work.
 */
-#define LIBCURL_VERSION_NUM 0x070e00
-
-/* The numeric version number is also available "in parts" by using these
-   defines: */
-#define LIBCURL_VERSION_MAJOR 7
-#define LIBCURL_VERSION_MINOR 14
-#define LIBCURL_VERSION_PATCH 0
+#define LIBCURL_VERSION_NUM 0x070f01
 
 #endif /* __CURL_CURLVER_H */

include/curl/mprintf.h

@@ -1,3 +1,5 @@
+#ifndef __CURL_MPRINTF_H
+#define __CURL_MPRINTF_H
 /***************************************************************************
  *                                  _   _ ____  _
  *  Project                     ___| | | |  _ \| |
@@ -21,9 +23,6 @@
  * $Id$
  ***************************************************************************/
 
-#ifndef H_MPRINTF
-#define H_MPRINTF
-
 #include <stdarg.h>
 #include <stdio.h> /* needed for FILE */
 
@@ -53,4 +52,4 @@ CURL_EXTERN char *curl_mvaprintf(const char *format, va_list args);
 # define vaprintf curl_mvaprintf
 #endif
 
-#endif /* H_MPRINTF */
+#endif /* __CURL_MPRINTF_H */

include/curl/multi.h

@@ -66,6 +66,15 @@
 #include <sys/types.h>
 #endif
 
+/*
+ * This header file should not really need to include "curl.h" since curl.h
+ * itself includes this file and we expect user applications to do #include
+ * <curl/curl.h> without the need for especially including multi.h.
+ *
+ * For some reason we added this include here at one point, and rather than to
+ * break existing (wrongly written) libcurl applications, we leave it as-is
+ * but with this warning attached.
+ */
 #include "curl.h"
 
 #ifdef  __cplusplus
@@ -91,7 +100,7 @@ typedef int curl_socket_t;
 #endif /* HAVE_CURL_MULTI_SOCKET */
 
 typedef enum {
-  CURLM_CALL_MULTI_PERFORM=-1, /* please call curl_multi_perform() soon */
+  CURLM_CALL_MULTI_PERFORM = -1, /* please call curl_multi_perform() soon */
   CURLM_OK,
   CURLM_BAD_HANDLE,      /* the passed-in handle is not a valid CURLM handle */
   CURLM_BAD_EASY_HANDLE, /* an easy handle was not good/valid */

lib/Makefile.Watcom

@@ -8,10 +8,11 @@ TARGETS = libcurl_wc.lib libcurl_wc.dll libcurl_wc_imp.lib
 
 CC = wcc386
 
-CFLAGS = -3r -mf -d3 -hc -zff -zgf -zq -zm -s -fr=con -w2 -fpi -oilrtfm -bt=nt -bd &
-         -d+ -dWIN32 -dHAVE_LONGLONG -dCURL_CA_BUNDLE=getenv("CURL_CA_BUNDLE") &
-         -dBUILDING_LIBCURL -dWITHOUT_MM_LIB -dHAVE_SPNEGO=1 -dENABLE_IPV6     &
-         -dDEBUG_THREADING_GETADDRINFO -dDEBUG=1 -dCURLDEBUG -I. -I..\include
+CFLAGS = -3r -mf -d3 -hc -zff -zgf -zq -zm -zc -s -fr=con -w2 -fpi -oilrtfm -bt=nt -bd &
+         -d+ -dWIN32 -dHAVE_LONGLONG -dCURL_CA_BUNDLE=getenv("CURL_CA_BUNDLE")     &
+         -dBUILDING_LIBCURL -dWITHOUT_MM_LIB -dHAVE_SPNEGO=1 -dENABLE_IPV6         &
+         -dDEBUG_THREADING_GETADDRINFO -dDEBUG=1 -dCURLDEBUG -d_WIN32_WINNT=0x0501 &
+         -I. -I..\include
 
 OBJ_DIR  = Watcom_obj
 LIB_ARG  = $(OBJ_DIR)\wlib.arg
@@ -44,7 +45,7 @@ OBJS = $(OBJ_DIR)\transfer.obj         $(OBJ_DIR)\file.obj       &
        $(OBJ_DIR)\hostip6.obj          $(OBJ_DIR)\inet_ntop.obj  &
        $(OBJ_DIR)\hostsyn.obj          $(OBJ_DIR)\parsedate.obj  &
        $(OBJ_DIR)\select.obj           $(OBJ_DIR)\sslgen.obj     &
-       $(OBJ_DIR)\gtls.obj
+       $(OBJ_DIR)\gtls.obj             $(OBJ_DIR)\tftp.obj
 
 RESOURCE = $(OBJ_DIR)\libcurl.res
 
@@ -362,3 +363,9 @@ $(OBJ_DIR)\gtls.obj: gtls.c setup.h config-win32.h
 $(OBJ_DIR)\sslgen.obj: sslgen.c setup.h config-win32.h urldata.h cookie.h &
   formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h sslgen.h &
   ssluse.h gtls.h sendf.h strequal.h url.h memory.h memdebug.h
+
+$(OBJ_DIR)\tftp.obj: tftp.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h formdata.h http_chunks.h hostip.h hash.h llist.h &
+  transfer.h sendf.h tftp.h progress.h ..\include\curl\mprintf.h memory.h &
+  select.h memdebug.h

lib/Makefile.inc

@@ -8,7 +8,7 @@ CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	\
   content_encoding.c share.c http_digest.c md5.c http_negotiate.c	\
   http_ntlm.c inet_pton.c strtoofft.c strerror.c hostares.c hostasyn.c	\
   hostip4.c hostip6.c hostsyn.c hostthre.c inet_ntop.c parsedate.c	\
-  select.c gtls.c sslgen.c
+  select.c gtls.c sslgen.c tftp.c
 
 HHEADERS = arpa_telnet.h netrc.h file.h timeval.h base64.h hostip.h	\
   progress.h formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h	\
@@ -18,5 +18,6 @@ HHEADERS = arpa_telnet.h netrc.h file.h timeval.h base64.h hostip.h	\
   share.h md5.h http_digest.h http_negotiate.h http_ntlm.h ca-bundle.h	\
   inet_pton.h strtoofft.h strerror.h inet_ntop.h curlx.h memory.h	\
   setup.h transfer.h select.h easyif.h multiif.h parsedate.h sslgen.h   \
-  gtls.h
+  gtls.h tftp.h sockaddr.h
+
 

lib/Makefile.netware

@@ -13,15 +13,17 @@ NDKBASE	= c:/novell
 endif
 
 # Edit the path below to point to the base of your Zlib sources.
-#ZLIB_PATH = ../../zlib-1.2.2
+ifndef ZLIB_PATH
+ZLIB_PATH = ../../zlib-1.2.3
+endif
 
 # Edit the path below to point to the base of your OpenSSL package.
 ifndef OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.7g
+OPENSSL_PATH = ../../openssl-0.9.8
 endif
 
 ifndef INSTDIR
-INSTDIR	= ../curl-$(LIBCURL_VERSION_STR)-bin-nw
+INSTDIR	= ..$(DS)curl-$(LIBCURL_VERSION_STR)-bin-nw
 endif
 
 # Edit the vars below to change NLM target settings.
@@ -103,8 +105,6 @@ else
 endif
 endif
 
-LDLIBS	=
-
 NDK_ROOT = $(NDKBASE)/ndk
 SDK_CLIB = $(NDK_ROOT)/nwsdk
 SDK_LIBC = $(NDK_ROOT)/libc
@@ -114,21 +114,26 @@ INCLUDES = -I. -I../include
 
 ifdef WITH_ARES
 	INCLUDES += -I../ares
-	LIBCARES = ../ares/libcares.lib
+	LDLIBS = ../ares/libcares.lib
 endif
-ifdef ZLIB_PATH
-	INCLUDES += -I$(ZLIB_PATH)
-	IMPORTS = @$(ZLIB_PATH)/nw/zlib.imp
-	MODULES = libz.nlm
-endif
-ifdef SSL
+ifdef WITH_SSL
 	INCLUDES += -I$(OPENSSL_PATH)/outinc_nw_libc -I$(OPENSSL_PATH)/outinc_nw_libc/openssl
-	LIBSSL = $(OPENSSL_PATH)/out_nw_libc/crypto.lib $(OPENSSL_PATH)/out_nw_libc/ssl.lib
+	LDLIBS += $(OPENSSL_PATH)/out_nw_libc/crypto.lib $(OPENSSL_PATH)/out_nw_libc/ssl.lib
+	IMPORTS += GetProcessSwitchCount RunningProcess
+endif
+ifdef WITH_ZLIB
+	INCLUDES += -I$(ZLIB_PATH)
+ifdef LINK_STATIC
+	LDLIBS += $(ZLIB_PATH)/nw/libz.lib
+else
+	IMPORTS += @$(ZLIB_PATH)/nw/libz.imp
+	MODULES += libz.nlm
+endif
 endif
 
 ifeq ($(LIBARCH),LIBC)
 	INCLUDES += -I$(SDK_LIBC)/include -I$(SDK_LIBC)/include/nks
-	INCLUDES += -I$(SDK_LIBC)/include/winsock
+	# INCLUDES += -I$(SDK_LIBC)/include/winsock
 	# INCLUDES += -I$(SDK_LDAP)/libc/inc
 	CFLAGS += -D_POSIX_SOURCE
 	# CFLAGS += -D__ANSIC__
@@ -152,13 +157,16 @@ endif
 
 ifeq ($(findstring linux,$(OSTYPE)),linux)
 DL	= '
+DS	= /
 #-include $(NDKBASE)/nlmconv/ncpfs.inc
+else
+DS	= \\
 endif
 
 # Makefile.inc provides the CSOURCES and HHEADERS defines
 include Makefile.inc
 
-OBJS	:= $(patsubst %.c,$(OBJDIR)/%.o,$(strip $(CSOURCES))) $(LIBCARES) $(LIBSSL)
+OBJS	:= $(patsubst %.c,$(OBJDIR)/%.o,$(strip $(CSOURCES))) $(LDLIBS)
 
 OBJL	= $(OBJS) $(OBJDIR)/nwlib.o
 
@@ -189,6 +197,9 @@ install: $(INSTDIR) all
 	@$(CP) ../COPYING $(INSTDIR)
 	@$(CP) ../README $(INSTDIR)
 	@$(CP) ../RELEASE-NOTES $(INSTDIR)
+ifdef WITH_SSL
+	@$(CP) ca-bundle.crt $(INSTDIR)
+endif
 
 clean:
 	-$(RM) config.h ca-bundle.h
@@ -274,11 +285,8 @@ ifdef IMPORTS
 	@echo $(DL)import $(IMPORTS)$(DL) >> $@
 endif
 ifeq ($(LD),nlmconv)
-ifdef WITH_ARES
-	@echo $(DL)input $(LIBCARES)$(DL) >> $@
-endif
-ifdef SSL
-	@echo $(DL)input $(LIBSSL)$(DL) >> $@
+ifdef LDLIBS
+	@echo $(DL)input $(LDLIBS)$(DL) >> $@
 endif
 	@echo $(DL)input $(OBJL)$(DL) >> $@
 	@echo $(DL)input $(PRELUDE)$(DL) >> $@
@@ -293,7 +301,7 @@ config.h: Makefile.netware
 	@echo $(DL)*/$(DL) >> $@
 	@echo $(DL)#define OS "i586-pc-NetWare"$(DL) >> $@
 	@echo $(DL)#define VERSION "$(LIBCURL_VERSION_STR)"$(DL) >> $@
-	@echo $(DL)#define PACKAGE_BUGREPORT "curl-bug@haxx.se"$(DL) >> $@
+	@echo $(DL)#define PACKAGE_BUGREPORT "a suitable curl mailing list => http://curl.haxx.se/mail/"$(DL) >> $@
 	@echo $(DL)#define HAVE_ARPA_INET_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_ASSERT_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_DLFCN_H 1$(DL) >> $@
@@ -336,6 +344,13 @@ config.h: Makefile.netware
 	@echo $(DL)#define SIZEOF_CURL_OFF_T 4$(DL) >> $@
 	@echo $(DL)#define STDC_HEADERS 1$(DL) >> $@
 	@echo $(DL)#define TIME_WITH_SYS_TIME 1$(DL) >> $@
+	@echo $(DL)#define HAVE_AF_INET6 1$(DL) >> $@
+	@echo $(DL)#define HAVE_PF_INET6 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRUCT_IN6_ADDR 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRUCT_SOCKADDR_IN6 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRUCT_ADDRINFO 1$(DL) >> $@
+	@echo $(DL)#define SIZEOF_STRUCT_IN6_ADDR 16$(DL) >> $@
+	@echo $(DL)#define SIZEOF_STRUCT_IN_ADDR 4$(DL) >> $@
 ifdef DISABLE_LDAP
 	@echo $(DL)#define CURL_DISABLE_LDAP 1$(DL) >> $@
 else
@@ -355,11 +370,11 @@ endif
 ifdef WITH_ARES
 	@echo $(DL)#define USE_ARES 1$(DL) >> $@
 endif
-ifdef ZLIB_PATH
+ifdef WITH_ZLIB
 	@echo $(DL)#define HAVE_ZLIB_H 1$(DL) >> $@
 	@echo $(DL)#define HAVE_LIBZ 1$(DL) >> $@
 endif
-ifdef SSL
+ifdef WITH_SSL
 	@echo $(DL)#define USE_SSLEAY 1$(DL) >> $@
 	@echo $(DL)#define USE_OPENSSL 1$(DL) >> $@
 	@echo $(DL)#define HAVE_OPENSSL_X509_H 1$(DL) >> $@

lib/Makefile.vc6

@@ -19,7 +19,6 @@
 # files in the "cfg" directory, but then the make file
 # in \src would need to be changed.
 #
-# $Id: Makefile.vc6,v 1.17 2004/01/13 08:57:01 bagder Exp $
 ##############################################################
 
 #
@@ -67,8 +66,8 @@ USEMM_LIBS = YES
 #############################################################
 ## Nothing more to do below this line!
 
-CCNODBG    = cl.exe /MD /O2 /DNDEBUG
-CCDEBUG    = cl.exe /MDd /Od /Gm /Zi /D_DEBUG /GZ
+CCNODBG    = cl.exe /O2 /DNDEBUG
+CCDEBUG    = cl.exe /Od /Gm /Zi /D_DEBUG /GZ
 CFLAGSSSL  = /DUSE_SSLEAY /I "$(OPENSSL_PATH)/inc32" /I "$(OPENSSL_PATH)/inc32/openssl"
 CFLAGSZLIB = /DHAVE_ZLIB_H /DHAVE_ZLIB /DHAVE_LIBZ /I "$(ZLIB_PATH)"
 CFLAGS     = /I. /I../include /nologo /W3 /GX /DWIN32 /YX /FD /c /DBUILDING_LIBCURL
@@ -90,9 +89,20 @@ CFGSET     = FALSE
 
 !IFDEF WINDOWS_SSPI
 CFLAGS = $(CFLAGS) /DUSE_WINDOWS_SSPI /I$(WINDOWS_SDK_PATH)\include
-LFLAGS = $(LFLAGS) $(WINDOWS_SDK_PATH)\lib\secur32.lib
 !ENDIF
 
+##############################################################
+# Runtime library configuration
+
+RTLIB   = /MD
+RTLIBD  = /MDd
+
+!IF "$(RTLIBCFG)" == "static"
+RTLIB  = /MT
+RTLIBD = /MTd
+!ENDIF
+
+
 ######################
 # release
 
@@ -100,7 +110,7 @@ LFLAGS = $(LFLAGS) $(WINDOWS_SDK_PATH)\lib\secur32.lib
 TARGET = $(LIB_NAME).lib
 DIROBJ = $(CFG)
 LNK    = $(LNKLIB) /out:$(DIROBJ)\$(TARGET)
-CC     = $(CCNODBG) $(CFLAGSLIB)
+CC     = $(CCNODBG) $(RTLIB) $(CFLAGSLIB)
 CFGSET = TRUE
 !ENDIF
 
@@ -112,7 +122,7 @@ TARGET   = $(LIB_NAME).lib
 DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LNK      = $(LNKLIB) $(ZLIBLIBS) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCNODBG) $(CFLAGSZLIB) $(CFLAGSLIB)
+CC       = $(CCNODBG) $(RTLIB) $(CFLAGSZLIB) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -122,7 +132,7 @@ CFGSET   = TRUE
 !IF "$(CFG)" == "release-dll"
 TARGET = $(LIB_NAME).dll
 DIROBJ = $(CFG)
-LNK    = $(LNKDLL) $(WINLIBS) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
+LNK    = $(LNKDLL) $(RTLIB) $(WINLIBS) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
 CC     = $(CCNODBG)
 CFGSET = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
@@ -136,7 +146,7 @@ TARGET   = $(LIB_NAME).lib
 DIROBJ   = $(CFG)
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
 LNK      = $(LNKLIB) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCNODBG) $(CFLAGSSSL) $(CFLAGSLIB)
+CC       = $(CCNODBG) $(RTLIB) $(CFLAGSSSL) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -148,7 +158,7 @@ TARGET   = $(LIB_NAME).dll
 DIROBJ   = $(CFG)
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
 LNK      = $(LNKDLL) $(WINLIBS) /out:$(DIROBJ)\$(TARGET) $(SSLLIBS) $(LFLAGSSSL) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
-CC       = $(CCNODBG) $(CFLAGSSSL)
+CC       = $(CCNODBG) $(RTLIB) $(CFLAGSSSL)
 CFGSET   = TRUE
 !ENDIF
 
@@ -161,7 +171,7 @@ DIROBJ   = $(CFG)
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LNK      = $(LNKLIB) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCNODBG) $(CFLAGSSSL) $(CFLAGSZLIB) $(CFLAGSLIB)
+CC       = $(CCNODBG) $(RTLIB) $(CFLAGSSSL) $(CFLAGSZLIB) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -173,7 +183,7 @@ TARGET   = $(LIB_NAME).dll
 DIROBJ   = $(CFG)
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
 LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
-CC       = $(CCNODBG) $(CFLAGSSSL)
+CC       = $(CCNODBG) $(RTLIB) $(CFLAGSSSL)
 CFGSET   = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
@@ -186,7 +196,7 @@ TARGET   = $(LIB_NAME).lib
 DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LNK      = $(LNKLIB) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCNODBG) $(CFLAGSZLIB) $(CFLAGSLIB)
+CC       = $(CCNODBG) $(RTLIB) $(CFLAGSZLIB) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -199,7 +209,7 @@ DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
 LNK      = $(LNKLIB) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCNODBG) $(CFLAGSSSL) $(CFLAGSZLIB) $(CFLAGSLIB)
+CC       = $(CCNODBG) $(RTLIB) $(CFLAGSSSL) $(CFLAGSZLIB) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -211,7 +221,7 @@ TARGET   = $(LIB_NAME).dll
 DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LNK      = $(LNKDLL) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
-CC       = $(CCNODBG) $(CFLAGSZLIB)
+CC       = $(CCNODBG) $(RTLIB) $(CFLAGSZLIB)
 CFGSET   = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
@@ -225,7 +235,7 @@ DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
 LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
-CC       = $(CCNODBG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CC       = $(CCNODBG) $(RTLIB) $(CFLAGSSSL) $(CFLAGSZLIB)
 CFGSET   = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
@@ -237,7 +247,7 @@ RESOURCE = $(DIROBJ)\libcurl.res
 TARGET = $(LIB_NAME_DEBUG).lib
 DIROBJ = $(CFG)
 LNK    = $(LNKLIB) /out:$(DIROBJ)\$(TARGET)
-CC     = $(CCDEBUG) $(CFLAGSLIB)
+CC     = $(CCDEBUG) $(RTLIBD) $(CFLAGSLIB)
 CFGSET = TRUE
 !ENDIF
 
@@ -248,8 +258,8 @@ CFGSET = TRUE
 TARGET   = $(LIB_NAME_DEBUG).lib
 DIROBJ   = $(CFG)
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
-LNK      = $(LNKLIB) $(SSLLIBS) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSLIB)
+LNK      = $(LNKLIB) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCDEBUG) $(RTLIBD) $(CFLAGSSSL) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -261,7 +271,7 @@ TARGET   = $(LIB_NAME_DEBUG).lib
 DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LNK      = $(LNKLIB) $(ZLIBLIBS) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCDEBUG) $(CFLAGSZLIB) $(CFLAGSLIB)
+CC       = $(CCDEBUG) $(RTLIBD) $(CFLAGSZLIB) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -273,7 +283,7 @@ TARGET   = $(LIB_NAME_DEBUG).lib
 DIROBJ   = $(CFG)
 LFLAGSSSL = /LIBPATH:$(OPENSSL_PATH)\out32dll
 LNK      = $(LNKLIB) $(WINLIBS) $(SSLLIBS) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSLIB)
+CC       = $(CCDEBUG) $(RTLIBD) $(CFLAGSSSL) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -285,8 +295,8 @@ TARGET   = $(LIB_NAME_DEBUG).lib
 DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
-LNK      = $(LNKLIB) $(SSLLIBS) $(ZLIBLIBS) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSZLIB) $(CFLAGSLIB)
+LNK      = $(LNKLIB) $(ZLIBLIBS) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCDEBUG) $(RTLIBD) $(CFLAGSSSL) $(CFLAGSZLIB) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -298,7 +308,7 @@ TARGET   = $(LIB_NAME_DEBUG).lib
 DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LNK      = $(LNKLIB) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCDEBUG) $(CFLAGSZLIB) $(CFLAGSLIB)
+CC       = $(CCDEBUG) $(RTLIBD) $(CFLAGSZLIB) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -311,7 +321,7 @@ DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
 LNK      = $(LNKLIB) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
-CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSZLIB) $(CFLAGSLIB)
+CC       = $(CCDEBUG) $(RTLIBD) $(CFLAGSSSL) $(CFLAGSZLIB) $(CFLAGSLIB)
 CFGSET   = TRUE
 !ENDIF
 
@@ -322,7 +332,7 @@ CFGSET   = TRUE
 TARGET = $(LIB_NAME_DEBUG).dll
 DIROBJ = $(CFG)
 LNK    = $(LNKDLL) $(WINLIBS) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
-CC     = $(CCDEBUG)
+CC     = $(CCDEBUG) $(RTLIBD) 
 CFGSET = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
@@ -335,7 +345,7 @@ TARGET   = $(LIB_NAME_DEBUG).dll
 DIROBJ   = $(CFG)
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
 LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(LFLAGSSSL) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
-CC       = $(CCDEBUG) $(CFLAGSSSL)
+CC       = $(CCDEBUG) $(RTLIBD) $(CFLAGSSSL)
 CFGSET   = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
@@ -348,7 +358,7 @@ TARGET   = $(LIB_NAME_DEBUG).dll
 DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LNK      = $(LNKDLL) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
-CC       = $(CCDEBUG) $(CFLAGSZLIB)
+CC       = $(CCDEBUG) $(RTLIBD) $(CFLAGSZLIB)
 CFGSET   = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
@@ -362,7 +372,7 @@ DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
 LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
 LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
-CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CC       = $(CCDEBUG) $(RTLIBD) $(CFLAGSSSL) $(CFLAGSZLIB)
 CFGSET   = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
@@ -469,6 +479,7 @@ X_OBJS= \
 	$(DIROBJ)\strerror.obj \
 	$(DIROBJ)\select.obj \
 	$(DIROBJ)\content_encoding.obj \
+	$(DIROBJ)\tftp.obj \
 	$(RESOURCE)
 
 all : $(TARGET)

lib/TODO.gnutls

@@ -1,17 +0,0 @@
-Things to fix for the GnuTLS support
-====================================
-
-* make the configure --with-ssl option first check for OpenSSL and then for
-  GnuTLS if OpenSSL wasn't detected.
-
-* Get NTLM working using the functions provided by libgcrypt, since GnuTLS
-  already depends on that to function. Not strictly SSL/TLS related, but
-  hey... Another option is to get available DES and MD4 source code from the
-  cryptopp library. They are fine license-wise, but are C++.
-
-* SSL engine stuff?
-
-  SRP for TLS
-
-* Work out a common method with Peter Sylvester's OpenSSL-patch for SRP
-  on the TLS to provide name and password

lib/amigaos.c

@@ -22,28 +22,53 @@
  ***************************************************************************/
 
 #include "amigaos.h"
-#include <stdio.h> /* for stderr */
+#include <amitcp/socketbasetags.h>
 
 struct Library *SocketBase = NULL;
+extern int errno, h_errno;
+
+#ifdef __libnix__
+#include <stabs.h>
+void __request(const char *msg);
+#else
+# define __request( msg )	Printf( msg "\n\a")
+#endif
 
 void amiga_cleanup()
 {
-  if(SocketBase)
-    CloseLibrary(SocketBase);
-
-  SocketBase = NULL;
+	if(SocketBase) {
+		CloseLibrary(SocketBase);
+		SocketBase = NULL;
+	}
 }
 
 BOOL amiga_init()
 {
-  if(!SocketBase)
-    SocketBase = OpenLibrary("bsdsocket.library", 4);
-
-  if(!SocketBase) {
-    fprintf(stderr, "No TCP/IP Stack running!\n\a");
-    return FALSE;
-  }
-
-  atexit(amiga_cleanup);
-  return TRUE;
+	if(!SocketBase)
+		SocketBase = OpenLibrary("bsdsocket.library", 4);
+	
+	if(!SocketBase) {
+		__request("No TCP/IP Stack running!");
+		return FALSE;
+	}
+	
+	if(SocketBaseTags(
+		SBTM_SETVAL(SBTC_ERRNOPTR(sizeof(errno))), (ULONG) &errno,
+//		SBTM_SETVAL(SBTC_HERRNOLONGPTR),	   (ULONG) &h_errno,
+		SBTM_SETVAL(SBTC_LOGTAGPTR),		   (ULONG) "cURL",
+	TAG_DONE)) {
+		
+		__request("SocketBaseTags ERROR");
+		return FALSE;
+	}
+	
+#ifndef __libnix__
+	atexit(amiga_cleanup);
+#endif
+	
+	return TRUE;
 }
+
+#ifdef __libnix__
+ADD2EXIT(amiga_cleanup,-50);
+#endif

lib/amigaos.h

@@ -32,13 +32,19 @@
 #include <proto/exec.h>
 #include <proto/dos.h>
 
-#include <bsdsocket.h>
+#include <sys/socket.h>
 
 #include "config-amigaos.h"
 
-#define select(args...) WaitSelect( args, NULL)
-#define inet_ntoa(x)    Inet_NtoA( x ## .s_addr)
-#define ioctl(a,b,c,d)  IoctlSocket( (LONG)a, (ULONG)b, (char*)c)
+#ifndef select
+# define select(args...) WaitSelect( args, NULL)
+#endif
+#ifndef inet_ntoa
+# define inet_ntoa(x)    Inet_NtoA( x ## .s_addr)
+#endif
+#ifndef ioctl
+# define ioctl(a,b,c,d)  IoctlSocket( (LONG)a, (ULONG)b, (char*)c)
+#endif
 #define _AMIGASF        1
 
 extern void amiga_cleanup();

lib/config-amigaos.h

@@ -54,6 +54,7 @@
 #define HAVE_UTIME_H 1
 #define HAVE_WRITABLE_ARGV 1
 #define HAVE_ZLIB_H 1
+#define HAVE_SYS_IOCTL_H 1
 
 #define USE_OPENSSL 1
 #define USE_SSLEAY 1
@@ -80,7 +81,9 @@
 #define TIME_WITH_SYS_TIME 1
 
 #define in_addr_t int
-#define socklen_t int
+#ifndef socklen_t
+# define socklen_t int
+#endif
 
 #ifndef O_RDONLY
 # define O_RDONLY 0x0000

lib/config-win32.h

@@ -27,7 +27,10 @@
 /* #undef size_t */
 
 /* Define this to 'int' if ssize_t is not an available typedefed type */
+#if defined(__WATCOMC__) && (__WATCOMC__ >= 1240)
+#else
 #define ssize_t int
+#endif
 
 /* Define this to 'int' if socklen_t is not an available typedefed type */
 #if !defined(ENABLE_IPV6) && ((_MSC_VER < 1300) || !defined(USE_SSLEAY))
@@ -232,6 +235,9 @@
 /* use ioctlsocket() for non-blocking sockets */
 #define HAVE_IOCTLSOCKET
 
+/* Define this if you have struct sockaddr_storage */
+#define HAVE_STRUCT_SOCKADDR_STORAGE
+
 /* lber dynamic library file */
 /* #undef DL_LBER_FILE */
 

lib/connect.c

@@ -359,13 +359,13 @@ static CURLcode bindlocal(struct connectdata *conn,
 
       } /* end of if  h */
       else {
-        failf(data,"could't find my own IP address (%s)", myhost);
+        failf(data,"couldn't find my own IP address (%s)", myhost);
         return CURLE_HTTP_PORT_FAILED;
       }
     } /* end of inet_addr */
 
     else {
-      failf(data, "could't find my own IP address (%s)", myhost);
+      failf(data, "couldn't find my own IP address (%s)", myhost);
       return CURLE_HTTP_PORT_FAILED;
     }
 
@@ -472,6 +472,9 @@ static bool trynextip(struct connectdata *conn,
   if(sockindex != FIRSTSOCKET)
     return TRUE; /* no next */
 
+  /* first close the failed socket */
+  sclose(conn->sock[sockindex]);
+
   /* try the next address */
   ai = conn->ip_addr->ai_next;
 
@@ -631,8 +634,9 @@ singleipconnect(struct connectdata *conn,
   int error;
   bool conected;
   struct SessionHandle *data = conn->data;
-  curl_socket_t sockfd = socket(ai->ai_family, ai->ai_socktype,
-                                ai->ai_protocol);
+  curl_socket_t sockfd;
+
+  sockfd = socket(ai->ai_family, conn->socktype, ai->ai_protocol);
   if (sockfd == CURL_SOCKET_BAD)
     return CURL_SOCKET_BAD;
 
@@ -660,7 +664,11 @@ singleipconnect(struct connectdata *conn,
   /* set socket non-blocking */
   Curl_nonblock(sockfd, TRUE);
 
-  rc = connect(sockfd, ai->ai_addr, (socklen_t)ai->ai_addrlen);
+  /* Connect TCP sockets, bind UDP */
+  if(conn->socktype == SOCK_STREAM)
+    rc = connect(sockfd, ai->ai_addr, (socklen_t)ai->ai_addrlen);
+  else
+    rc = 0;
 
   if(-1 == rc) {
     error = Curl_ourerrno();

lib/cookie.c

@@ -85,12 +85,17 @@ Example set of cookies:
 #include <stdlib.h>
 #include <string.h>
 
+#define _MPRINTF_REPLACE /* without this on windows OS we get undefined reference to snprintf */
+#include <curl/mprintf.h>
+
 #include "urldata.h"
 #include "cookie.h"
 #include "strequal.h"
 #include "strtok.h"
 #include "sendf.h"
 #include "memory.h"
+#include "share.h"
+#include "strtoofft.h"
 
 /* The last #include file should be: */
 #ifdef CURLDEBUG
@@ -130,6 +135,27 @@ static bool tailmatch(const char *little, const char *bigone)
   return (bool)strequal(little, bigone+biglen-littlelen);
 }
 
+/*
+ * Load cookies from all given cookie files (CURLOPT_COOKIEFILE).
+ */
+void Curl_cookie_loadfiles(struct SessionHandle *data)
+{
+  struct curl_slist *list = data->change.cookielist;
+  if(list) {
+    Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE);
+    while(list) {
+      data->cookies = Curl_cookie_init(data,
+                                       list->data,
+                                       data->cookies,
+                                       data->set.cookiesession);
+      list = list->next;
+    }
+    Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE);
+    curl_slist_free_all(data->change.cookielist); /* clean up list */
+    data->change.cookielist = NULL; /* don't do this again! */
+  }
+}
+
 /****************************************************************************
  *
  * Curl_cookie_add()
@@ -317,7 +343,7 @@ Curl_cookie_add(struct SessionHandle *data,
               badcookie = TRUE;
               break;
             }
-            co->expires = (long)curl_getdate(what, &now);
+            co->expires = curl_getdate(what, &now);
           }
           else if(!co->name) {
             co->name = strdup(name);
@@ -470,7 +496,7 @@ Curl_cookie_add(struct SessionHandle *data,
         co->secure = (bool)strequal(ptr, "TRUE");
         break;
       case 4:
-        co->expires = atoi(ptr);
+        co->expires = curlx_strtoofft(ptr, NULL, 10);
         break;
       case 5:
         co->name = strdup(ptr);
@@ -816,6 +842,34 @@ void Curl_cookie_cleanup(struct CookieInfo *c)
    }
 }
 
+/* get_netscape_format()
+ *
+ * Formats a string for Netscape output file, w/o a newline at the end.
+ *
+ * Function returns a char * to a formatted line. Has to be free()d
+*/
+static char *get_netscape_format(const struct Cookie *co)
+{
+   return aprintf(
+     "%s%s\t" /* domain */
+     "%s\t"   /* tailmatch */
+     "%s\t"   /* path */
+     "%s\t"   /* secure */
+     "%" FORMAT_OFF_T "\t"   /* expires */
+     "%s\t"   /* name */
+     "%s",    /* value */
+     /* Make sure all domains are prefixed with a dot if they allow
+        tailmatching. This is Mozilla-style. */
+     (co->tailmatch && co->domain && co->domain[0] != '.')? ".":"",
+     co->domain?co->domain:"unknown",
+     co->tailmatch?"TRUE":"FALSE",
+     co->path?co->path:"/",
+     co->secure?"TRUE":"FALSE",
+     co->expires,
+     co->name,
+     co->value?co->value:"");
+}
+
 /*
  * Curl_cookie_output()
  *
@@ -847,6 +901,8 @@ int Curl_cookie_output(struct CookieInfo *c, char *dumphere)
   }
 
   if(c) {
+    char *format_ptr;
+
     fputs("# Netscape HTTP Cookie File\n"
           "# http://www.netscape.com/newsref/std/cookie_spec.html\n"
           "# This file was generated by libcurl! Edit at your own risk.\n\n",
@@ -854,26 +910,13 @@ int Curl_cookie_output(struct CookieInfo *c, char *dumphere)
     co = c->cookies;
 
     while(co) {
-      fprintf(out,
-              "%s%s\t" /* domain */
-              "%s\t" /* tailmatch */
-              "%s\t" /* path */
-              "%s\t" /* secure */
-              "%u\t" /* expires */
-              "%s\t" /* name */
-              "%s\n", /* value */
-
-              /* Make sure all domains are prefixed with a dot if they allow
-                 tailmatching. This is Mozilla-style. */
-              (co->tailmatch && co->domain && co->domain[0] != '.')? ".":"",
-              co->domain?co->domain:"unknown",
-              co->tailmatch?"TRUE":"FALSE",
-              co->path?co->path:"/",
-              co->secure?"TRUE":"FALSE",
-              (unsigned int)co->expires,
-              co->name,
-              co->value?co->value:"");
-
+      format_ptr = get_netscape_format(co);
+      if (format_ptr == NULL) {
+        fprintf(out, "#\n# Fatal libcurl error\n");
+        return 1;
+      }
+      fprintf(out, "%s\n", format_ptr);
+      free(format_ptr);
       co=co->next;
     }
   }
@@ -884,4 +927,35 @@ int Curl_cookie_output(struct CookieInfo *c, char *dumphere)
   return 0;
 }
 
+struct curl_slist *Curl_cookie_list(struct SessionHandle *data)
+{
+  struct curl_slist *list = NULL;
+  struct curl_slist *beg;
+  struct Cookie *c;
+  char *line;
+
+  if ((data->cookies == NULL) ||
+      (data->cookies->numcookies == 0))
+    return NULL;
+
+  c = data->cookies->cookies;
+
+  beg = list;
+  while (c) {
+    /* fill the list with _all_ the cookies we know */
+    line = get_netscape_format(c);
+    if (line == NULL) {
+      /* get_netscape_format returns null only if we run out of memory */
+
+      curl_slist_free_all(beg); /* free some memory */
+      return NULL;
+    }
+    list = curl_slist_append(list, line);
+    free(line);
+    c = c->next;
+  }
+
+  return list;
+}
+
 #endif /* CURL_DISABLE_HTTP || CURL_DISABLE_COOKIES */

lib/cookie.h

@@ -38,7 +38,7 @@ struct Cookie {
   char *value;       /* name = <this> */
   char *path;         /* path = <this> */
   char *domain;      /* domain = <this> */
-  long expires;    /* expires = <this> */
+  curl_off_t expires;  /* expires = <this> */
   char *expirestr;   /* the plain text version */
   bool tailmatch;    /* weather we do tail-matchning of the domain name */
 
@@ -92,4 +92,12 @@ void Curl_cookie_freelist(struct Cookie *);
 void Curl_cookie_cleanup(struct CookieInfo *);
 int Curl_cookie_output(struct CookieInfo *, char *);
 
+#if defined(CURL_DISABLE_HTTP) || defined(CURL_DISABLE_COOKIES)
+#define Curl_cookie_list(x) NULL
+#define Curl_cookie_loadfiles(x)
+#else
+struct curl_slist *Curl_cookie_list(struct SessionHandle *data);
+void Curl_cookie_loadfiles(struct SessionHandle *data);
+#endif
+
 #endif

lib/easy.c

@@ -308,49 +308,19 @@ CURL *curl_easy_init(void)
  * curl_easy_setopt() is the external interface for setting options on an
  * easy handle.
  */
-typedef int (*func_T)(void);
+
 CURLcode curl_easy_setopt(CURL *curl, CURLoption tag, ...)
 {
   va_list arg;
-  func_T param_func = (func_T)0;
-  long param_long = 0;
-  void *param_obj = NULL;
-  curl_off_t param_offset = 0;
   struct SessionHandle *data = curl;
-  CURLcode ret=CURLE_FAILED_INIT;
+  CURLcode ret;
 
   if(!curl)
     return CURLE_BAD_FUNCTION_ARGUMENT;
 
   va_start(arg, tag);
 
-  /* PORTING NOTE:
-     Object pointers can't necessarily be casted to function pointers and
-     therefore we need to know what type it is and read the correct type
-     at once. This should also correct problems with different sizes of
-     the types.
-  */
-
-  if(tag < CURLOPTTYPE_OBJECTPOINT) {
-    /* This is a LONG type */
-    param_long = va_arg(arg, long);
-    ret = Curl_setopt(data, tag, param_long);
-  }
-  else if(tag < CURLOPTTYPE_FUNCTIONPOINT) {
-    /* This is a object pointer type */
-    param_obj = va_arg(arg, void *);
-    ret = Curl_setopt(data, tag, param_obj);
-  }
-  else if(tag < CURLOPTTYPE_OFF_T) {
-    /* This is a function pointer type */
-    param_func = va_arg(arg, func_T );
-    ret = Curl_setopt(data, tag, param_func);
-  }
-  else {
-    /* This is a curl_off_t type */
-    param_offset = va_arg(arg, curl_off_t);
-    ret = Curl_setopt(data, tag, param_offset);
-  }
+  ret = Curl_setopt(data, tag, arg);
 
   va_end(arg);
   return ret;