The initial fix to only compare full path names were done in commit
04f52e9b4d but found out to be incomplete. This takes should make the
change more complete and there's now two additional tests to verify
(test 31 and 62).
By always returning the md5 for an empty body when auth-int is asked
for, libcurl now at least sometimes does the right thing.
Bug: http://curl.haxx.se/bug/view.cgi?id=1235
Patched-by: Nach M. S.
Allow less room for "triggered too early" mistakes by applications /
timers on non-windows platforms. Starting now, we assume that a timeout
call is never made earlier than 3 milliseconds before the actual
timeout. This greatly improves timeout accuracy on Linux.
Bug: http://curl.haxx.se/bug/view.cgi?id=1228
Reported-by: Hang Su
In the pkcs12 code, we get a list of x509 records returned from
PKCS12_parse but when iterating over the list and passing each to
SSL_CTX_add_extra_chain_cert() we didn't also properly remove them from
the "stack", which made them get freed twice (both in sk_X509_pop_free()
and then later in SSL_CTX_free).
This isn't really documented anywhere...
Bug: http://curl.haxx.se/bug/view.cgi?id=1236
Reported-by: Nikaiw
commit 29bf0598aa introduced a problem when the "internal" timeout is
prefered to the given if shorter, as it didn't consider the case where
-1 was returned. Now the internal timeout is only considered if not -1.
Reported-by: Tor Arntsen
Bug: http://curl.haxx.se/mail/lib-2013-06/0015.html
If the multi handle's pending timeout is less than what is passed into
this function, it will now opt to use the shorter time anyway since it
is a very good hint that the handle wants to process something in a
shorter time than what otherwise would happen.
curl_multi_wait.3 was updated accordingly to clarify
This is the reason for bug #1224
Bug: http://curl.haxx.se/bug/view.cgi?id=1224
Reported-by: Andrii Moiseiev
When sending the HTTP Authorization: header for digest, the user name
needs to be escaped if it contains a double-quote or backslash.
Test 1229 was added to verify
Reported and fixed by: Nach M. S
Bug: http://curl.haxx.se/bug/view.cgi?id=1230
We found that in specific cases if the connection is abruptly closed,
the underlying socket is listed in a close_wait state. We continue to
call the curl_multi_perform, curl_mutli_fdset etc. None of these APIs
report the socket closed / connection finished. Since we have cases
where the multi connection is only used once, this can pose a problem
for us. I've read that if another connection was to come in, curl would
see the socket as bad and attempt to close it at that time -
unfortunately, this does not work for us.
I found that in specific situations, if SSL_write returns 0, curl did
not recognize the socket as closed (or errored out) and did not report
it to the application. I believe we need to change the code slightly, to
check if ssl_write returns 0. If so, treat it as an error - the same as
a negative return code.
For OpenSSL - the ssl_write documentation is here:
http://www.openssl.org/docs/ssl/SSL_write.html
1 - don't skip host names with a colon in them in an attempt to bail out
on HTTP headers in the cookie file parser. It was only a shortcut anyway
and trying to parse a file with HTTP headers will still be handled, only
slightly slower.
2 - don't skip domain names based on number of dots. The original
netscape cookie spec had this oddity mentioned and while our code
decreased the check to only check for two, the existing cookie spec has
no such dot counting required.
Bug: http://curl.haxx.se/bug/view.cgi?id=1221
Reported-by: Stefan Neis
I found a bug which cURL sends cookies to the path not to aim at.
For example:
- cURL sends a request to http://example.fake/hoge/
- server returns cookie which with path=/hoge;
the point is there is NOT the '/' end of path string.
- cURL sends a request to http://example.fake/hogege/ with the cookie.
The reason for this old "feature" is because that behavior is what is
described in the original netscape cookie spec:
http://curl.haxx.se/rfc/cookie_spec.html
The current cookie spec (RFC6265) clarifies the situation:
http://tools.ietf.org/html/rfc6265#section-5.2.4
This reverts commit 8ec2cb5544.
We don't have any code anywhere in libcurl (or the curl tool) that use
wcsdup so there's no such memory use to track. It seems to cause mild
problems with the Borland compiler though that we may avoid by reverting
this change again.
Bug: http://curl.haxx.se/mail/lib-2013-05/0070.html
If the mail sent during the transfer contains a terminating <CRLF> then
we should not send the first <CRLF> of the EOB as specified in RFC-5321.
Additionally don't send the <CRLF> if there is "no mail data" as the
DATA command already includes it.
The code within #ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID wrongly had two
closing braces when it should only have one, so builds without that
define would fail.
Bug: http://curl.haxx.se/mail/lib-2013-05/0000.html
The curl command line utility would display the the completed progress
bar with a percentage of zero as the progress routines didn't know the
size of the transfer.
Removed the hard returns from imap and pop3 by using the same style for
sending the authentication string as smtp. Moved the "Other mechanisms
not supported" check in smtp to match that of imap and pop3 to provide
consistency between the three email protocols.
Users using the Secure Transport (darwinssl) back-end can now use a
certificate and private key to authenticate with a site using TLS. Because
Apple's security system is based around the keychain and does not have any
non-public function to create a SecIdentityRef data structure from data
loaded outside of the Keychain, the certificate and private key have to be
loaded into the Keychain first (using the certtool command line tool or
the Security framework's C API) before we can find it and use it.
In addition to checking for the SASL-IR capability the user can override
the sending of the client's initial response in the AUTHENTICATION
command with the use of CURLOPT_SASL_IR should the server erroneously
not report SASL-IR when it does support it.
Updated the default behaviour of sending the client's initial response in the AUTH
command to not send it and added support for CURLOPT_SASL_IR to allow the user to
specify including the response.
Related Bug: http://curl.haxx.se/mail/lib-2012-03/0114.html
Reported-by: Gokhan Sengun
By introducing an internal alternative to curl_multi_init() that accepts
parameters to set the hash sizes, easy handles will now use tiny socket
and connection hash tables since it will only ever add a single easy
handle to that multi handle.
This decreased the number mallocs in test 40 (which is a rather simple
and typical easy interface use case) from 1142 to 138. The maximum
amount of memory allocated used went down from 118969 to 78805.
When connecting back to an FTP server after having sent PASV/EPSV,
libcurl sometimes didn't use the proxy properly even though the proxy
was used for the initial connect.
The function wrongly checked for the CURLOPT_PROXY variable to be set,
which made it act wrongly if the proxy information was set with an
environment variable.
Added test case 711 to verify (based on 707 which uses --socks5). Also
added test712 to verify another variation of setting the proxy: with
--proxy socks5://
Bug: http://curl.haxx.se/bug/view.cgi?id=1218
Reported-by: Zekun Ni
... in order to prevent an artificial timeout event based on stale
speed-check data from a previous network transfer. This commit fixes
a regression caused by 9dd85bced5.
Bug: https://bugzilla.redhat.com/906031
Fixed an issue in parse_proxy(), introduced in commit 11332577b3,
where an empty username or password (For example: http://:@example.com)
would cause a crash.
There is no need to perform separate clearing of data if a NULL option
pointer is passed in. Instead this operation can be performed by simply
not calling parse_login_details() and letting the rest of the code do
the work.
setstropt_userpwd() was calling setstropt() in commit fddb7b44a7 to
set each of the login details which would duplicate the strings and
subsequently cause a memory leak.
In addition to parsing the optional login options from the URL, added
support for parsing them from CURLOPT_USERPWD, to allow the following
supported command line:
--user username:password;options
Added bounds checking when searching for the separator characters within
the login string as this string may not be NULL terminated (For example
it is the login part of a URL). We do this in preference to allocating a
new string to copy the login details into which could then be passed to
parse_login_details() for performance reasons.
As well as parsing the username and password from the URL, added support
for parsing the optional options part from the login details, to allow
the following supported URL format:
schema://username:password;options@example.com/path?q=foobar
This will only be used by IMAP, POP3 and SMTP at present but any
protocol that may be given login options in the URL will be able to
add support for them.
...instead of the 220 we otherwise expect.
Made the ftpserver.pl support sending a custom "welcome" and then
created test 1219 to verify this fix with such a 230 welcome.
Bug: http://curl.haxx.se/mail/lib-2013-02/0102.html
Reported by: Anders Havn
Accessing a file with an absolute path in the root dir but with no
directory specified was not handled correctly. This fix comes with four
new test cases that verify it.
Bug: http://curl.haxx.se/mail/lib-2013-04/0142.html
Reported by: Sam Deane
Cookies set for 'example.com' could accidentaly also be sent by libcurl
to the 'bexample.com' (ie with a prefix to the first domain name).
This is a security vulnerabilty, CVE-2013-1944.
Bug: http://curl.haxx.se/docs/adv_20130412.html
The previously applied patch didnt work on Windows; we cant rely
on shell commands like 'echo' since they act diffently on each
platform and each shell.
In order to keep this script platform-independent the code must
only use pure Perl.
When doing PWD, there's a 257 response which apparently some servers
prefix with a comment before the path instead of after it as is
otherwise the norm.
Failing to parse this, several otherwise legitimate use cases break.
Bug: http://curl.haxx.se/mail/lib-2013-04/0113.html
The OpenSSL pipe wrote to the final CA bundle file, but the encoded PEM
output wrote to a temporary file. Consequently, the OpenSSL output was
lost when the temp file was renamed to the final file at script finish
(overwriting the final file written earlier by openssl).
Patch posted to the list by Richard Michael (rmichael edgeofthenet org).
I noticed that aria2's SecureTransport code disables insecure ciphers such
as NULL, anonymous, IDEA, and weak-key ciphers used by SSLv3 and later.
That's a good idea, and now we do the same thing in order to prevent curl
from accessing a "secure" site that only negotiates insecure ciphersuites.
Previously it only compared credentials if the requested needle
connection wasn't using a proxy. This caused NTLM authentication
failures when using proxies as the authentication code wasn't send on
the connection where the challenge arrived.
Added test 1215 to verify: NTLM server authentication through a proxy
(This is a modified copy of test 67)
Since qsort implementations vary with regards to handling the order
of similiar elements, this change makes the internal sort function
more deterministic by comparing path length first, then domain length
and finally the cookie name. Spotted with testcase 62 on Windows.
When doing PORT and upload (STOR), this function needs to extract the
file descriptor for both connections so that it will respond immediately
when the server eventually connects back.
This flaw caused active connections to become unnecessary slow but they
would still often work due to the normal polling on a timeout. The bug
also would not occur if the server connected back very fast, like when
testing on local networks.
Bug: http://curl.haxx.se/bug/view.cgi?id=1183
Reported by: Daniel Theron
I am using curl_easy_setopt(CURLOPT_INTERFACE, "if!something") to force
transfers to use a particular interface but the transfer fails with
CURLE_INTERFACE_FAILED, "Failed binding local connection end" if the
interface I specify has no IPv6 address. The cause is as follows:
The remote hostname resolves successfully and has an IPv6 address and an
IPv4 address.
cURL attempts to connect to the IPv6 address first.
bindlocal (in lib/connect.c) fails because Curl_if2ip cannot find an
IPv6 address on the interface.
This is a fatal error in singleipconnect()
This change will make cURL try the next IP address in the list.
Also included are two changes related to IPv6 address scope:
- Filter the choice of address in Curl_if2ip to only consider addresses
with the same scope ID as the connection address (mismatched scope for
local and remote address does not result in a working connection).
- bindlocal was ignoring the scope ID of addresses returned by
Curl_if2ip . Now it uses them.
Bug: http://curl.haxx.se/bug/view.cgi?id=1189
At some point recently we lost the default value for the easy handle's
connection cache, and this change puts it back to 5 - which is the
former default value and it is documented in the curl_easy_setopt.3 man
page.
The Microsoft knowledge-base article
http://support.microsoft.com/kb/823764 describes how to use SNDBUF to
overcome a performance shortcoming in winsock, but it doesn't apply to
Windows Vista and later versions. If the described SNDBUF magic is
applied when running on those more recent Windows versions, it seems to
instead have the reversed effect in many cases and thus make libcurl
perform less good on those systems.
This fix thus adds a run-time version-check that does the SNDBUF magic
conditionally depending if it is deemed necessary or not.
Bug: http://curl.haxx.se/bug/view.cgi?id=1188
Reported by: Andrew Kurushin
Tested by: Christian Hägele
The last remaining code piece that still used FTPSENDF now uses PPSENDF.
In the problematic case, a PREQUOTE series was done on a re-used
connection when Curl_pp_init() hadn't been called so it had messed up
pointers. The init call is done properly from Curl_pp_sendf() so this
change fixes this particular crash.
Bug: http://curl.haxx.se/mail/lib-2013-03/0319.html
Reported by: Sam Deane
As of 25-mar-2013 wcsdup() _wcsdup() and _tcsdup() are only used in
WIN32 specific code, so tracking of these has not been extended for
other build targets. Without this fix, memory tracking system on
WIN32 builds, when using these functions, would provide misleading
results.
In order to properly extend this support for all targets curl.h
would have to define curl_wcsdup_callback prototype and consequently
wchar_t should be visible before that in curl.h. IOW curl_wchar_t
defined in curlbuild.h and this pulling whatever system header is
required to get wchar_t definition.
Additionally a new curl_global_init_mem() function that also receives
user defined wcsdup() callback would be required.
Proxy servers tend to add their own headers at the beginning of
responses. The size of these headers was not taken into account by
CURLINFO_HEADER_SIZE before this change.
Bug: http://curl.haxx.se/bug/view.cgi?id=1204
After having done a POST over a CONNECT request, the 'rewindaftersend'
boolean could be holding the previous value which could lead to badness.
This should be tested for in a new test case!
Bug: https://groups.google.com/d/msg/msysgit/B31LNftR4BI/KhRTz0iuGmUJ
Fixed incorrect initial response generation for the NTLM and LOGIN SASL
authentication mechanisms when the SASL-IR was detected.
Introduced in commit: 6da7dc026c.
curl has been accepting URLs using slightly wrong syntax for a long
time, such as when completely missing as slash "http://example.org" or
missing a slash when a query part is given
"http://example.org?q=foobar".
curl would translate these into a legitimate HTTP request to servers,
although as was shown in bug #1206 it was not adjusted properly in the
cases where a HTTP proxy was used.
Test 1213 and 1214 were added to the test suite to verify this fix.
The test HTTP server was adjusted to allow us to specify test number in
the host name only without using any slashes in a given URL.
Bug: http://curl.haxx.se/bug/view.cgi?id=1206
Reported by: ScottJi
Introducing a number of options to the multi interface that
allows for multiple pipelines to the same host, in order to
optimize the balance between the penalty for opening new
connections and the potential pipelining latency.
Two new options for limiting the number of connections:
CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections
to the same host. When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished, so we can reuse the connection.
CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total.
When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished. The free connection will then be reused, if possible, or
closed if the pending handle can't reuse it.
Several new options for pipelining:
CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a
pipeline is "full" when a connection is to be reused, a new connection
will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it.
If not, the handle will be put in a pending state until a connection is
ready (either free or a pipe got shorter).
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a transfer with a content
length that is larger than this.
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a chunk larger than this.
CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow
pipelining.
CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow
pipelining.
See the curl_multi_setopt() man page for details.
Following commit e450f66a02 and the changes in the multi interface
being used internally, from 7.29.0, the transfer cancellation in
pop3_dophase_done() is no longer required.
When Curl_do() returns failure, the connection pointer could be NULL so
the code path following needs to that that into account.
Bug: http://curl.haxx.se/mail/lib-2013-03/0062.html
Reported by: Eric Hu
Moved the blocking state machine to the disconnect functions so that the
logout / quit functions are only responsible for sending the actual
command needed to logout or quit.
Additionally removed the hard return on failure.
Added an exception, for the STORE command, to the untagged response
processor in imap_endofresp() as servers will back respones containing
the FETCH keyword instead.
The list of unsafe functions currently consists of sprintf, vsprintf,
strcat, strncat and gets.
Subsequently, some existing code needed updating to avoid warnings on
this.
As the UID has to be specified by the user for the FETCH command to work
correctly, added a check to imap_fetch(), although strictly speaking it
is protected by the call from imap_perform().
The option needs to be set on the SSL socket. Setting it on the model
takes no effect. Note that the non-blocking mode is still not enabled
for the handshake because the code is not yet ready for that.
Commit 26eaa83830 introduces the use of S_ISDIR() yet some compilers,
such as MSVC don't support it, so we must define a substitute using
file flags and mask.
Commit f4cc54cb47 (shipped as part of the 7.29.0 release) was a
bug fix that introduced a regression in that while trying to avoid
allowing directory names, it also forbade "special" files like character
devices and more. like "/dev/null" as was used by Oliver who reported
this regression.
Reported by: Oliver Gondža
Bug: http://curl.haxx.se/mail/archive-2013-02/0040.html
If the server hung up the connection without sending a closure alert,
then we'd keep probing the socket for data even though it's dead. Now
we're ready for this situation.
Bug: http://curl.haxx.se/mail/lib-2013-03/0014.html
Reported by: Aki Koskinen
Some state changes would be performed after a failure test that
performed a hard return, whilst others would be performed within a test
for success. Updated the code, for consistency, so all instances are
performed within a success test.
Some state changes would be performed after a failure test that
performed a hard return, whilst others would be performed within a test
for success. Updated the code, for consistency, so all instances are
performed within a success test.
Added imap_custom(), which initiates the custom command processing,
and an associated response handler imap_state_custom_resp(), which
handles any responses by sending them to the client as body data.
All untagged responses with the same name as the first word of the
custom request string are accepted, with the exception of SELECT and
EXAMINE which have responses that cannot be easily identified. An
extra check has been provided for them so that any untagged responses
are accepted for them.
Added imap_parse_custom_request() for parsing the CURLOPT_CUSTOMREQUEST
parameter which URL decodes the value and separates the request from
any parameters - This makes it easier to filter untagged responses
by the request command.
For consistency changed the logic of the imap_state_append_resp()
function to test for an unsucessful continuation response rather than a
succesful one.
The APPEND operation needs to be performed in several steps:
1) We send "<tag> APPEND <mailbox> <flags> {<size>}\r\n"
2) Server responds with continuation respose "+ ...\r\n"
3) We start the transfer and send <size> bytes of data
4) Only now we end the request command line by sending "\r\n"
5) Server responds with "<tag> OK ...\r\n"
This commit performs steps 4 and 5, in the DONE phase, as more
processing is required after the transfer.
Some state changes would be performed after a failure test that
performed a hard return, whilst others would be performed within a test
for success. Updated the code, for consistency, so all instances are
performed within a success test.
Not processing the final FETCH responses was not optimal, not only
because the response code would be ignored but it would also leave data
unread on the socket which would prohibit connection reuse.
A typical FETCH response can be broken down into four parts:
1) "* <uid> FETCH (<what> {<size>}\r\n", using continuation syntax
2) <size> bytes of the actual message
3) ")\r\n", finishing the untagged response
4) "<tag> OK ...", finishing the command
Part 1 is read in imap_fetch_resp(), part 2 is consumed in the PERFORM
phase by the transfer subsystem, parts 3 and 4 are currently ignored.
Added a loop to imap_statemach_act() in which Curl_pp_readresp() is
called until the cache is drained. Without this multiple responses
received in a single packet could result in a hang or delay.
RFC 3501 states that "the client MUST be prepared to accept any response
at all times" yet we assume anything received with "* " at the beginning
is the untagged response we want.
Introduced a helper function that checks whether the input looks like a
response to specified command, so that we may filter the ones we are
interested in according to the current state.
Introduced similar handling to the FETCH responses, where even the
untagged data responses are handled by the response handler of the
individual state.
Removed this pointer to a downloaded bytes counter because it was set in
smtp_init() to point to the same variable the transfer functions keep
the count in (k->bytecount), effectively making the code in transfer.c
"*k->bytecountp = k->bytecount" a no-op.
Removed this pointer to a downloaded bytes counter because it was set in
pop3_init() to point to the same variable the transfer functions keep
the count in (k->bytecount), effectively making the code in transfer.c
"*k->bytecountp = k->bytecount" a no-op.
Removed this pointer to a downloaded bytes counter because it was set in
imap_init() to point to the same variable the transfer functions keep
the count in (k->bytecount), effectively making the code in transfer.c
"*k->bytecountp = k->bytecount" a no-op.
From a maintenance point of view the code reads better to view tagged
responses, then untagged followed by continuation responses.
Additionally, this matches the order of responses in POP3.
Updated the mailbox variable to correctly reflect it's purpose. The
name mailbox was a leftover from when IMAP and POP3 support was
initially added to curl.
Updated the FETCH command to send the UID and SECTION parsed from the
URL. By default the BODY specifier doesn't include a section, BODY[] is
now sent whereas BODY[TEXT] was previously sent. In my opinion
retrieving just the message text is rarely useful when dealing with
emails, as the headers are required for example, so that functionality
is not retained. In can however be simulated by adding SECTION=TEXT to
the URL.
Also updated test801 and test1321 due to the BODY change.
Removed user and passwd from the SMTP struct as these cannot be set on
a per-request basis and are leftover from legacy FTP code.
Changed some comments still using FTP terminology.
Removed user and passwd from the POP3 struct as these cannot be set on
a per-request basis and are leftover from legacy FTP code.
Changed some comments still using FTP terminology.
Moved the mailbox and custom request variables from the per-connection
struct pop3_conn to the new per-request struct and fixed references
accordingly.
Created a new IMAP structure and changed the type of the imap proto
variable in connectdata from FTP* to the new IMAP*.
Moved the mailbox variable from the per-connection struct imap_conn to
the new per-request struct and fixed references accordingly.
Moved the clean-up of the mailbox variable from imap_disconnect() to
imap_done() as this variable is allocated in the do phase, yet would
have only been freed only once if multiple selects where preformed
on a single connection.
Always interprets the pointer passed with the CURLOPT_WRITEDATA or
CURLOPT_READDATA options of curl_easy_setopt() as a void pointer in
order to avoid problems in environments where FILE and void pointers
have non-trivial conversion.
Use Curl_pp_moredata() in Curl_pp_multi_statemach() to check if there is
more data to be received, rather than the socket state, as a task could
hang waiting for more data from the socket itself.
A simple function to test whether the PP is not sending and there are
still more data in its receiver cache. This will be later utilized to:
1) Change Curl_pp_multi_statemach() and Curl_pp_easy_statemach() to
not test socket state and just call user's statemach_act() function
when there are more data to process, because otherwise the task would
just hang, waiting for more data from the socket.
2) Allow PP users to read multiple responses by looping as long as there
are more data available and current phase is not finished.
(Currently needed for correct processing of IMAP SELECT responses.)
The attempt to use gai_strerror() or alternative function didn't work as
the 'sock_error' field didn't contain the proper error code. But since
this hasn't been reported and thus isn't really a big deal I decided to
just scrap the whole attempt to output the detailed resolver error and
instead remain with just stating that the resolving of the name failed.
It seems older gcc installations (at least) will cause warnings if we
name a variable 'wait'. Now changed to 'block' instead.
Reported by: Jiří Hruška
Bug: http://curl.haxx.se/mail/lib-2013-02/0247.html
Apple made a number of changes to Xcode 4. The SDKs were moved, the entire
Developer folder was moved, and PowerPC support was removed. The script
will now adapt to those changes and should be future-proofed against
additional changes in case Apple moves the Developer folder ever again.
Also, the minimum OS X version compiler option was removed, so that the
framework can be built against the latest SDK but still run in older cats.
... since they're not used by the easy interface really, I wanted to
remove the association. Also, I unified the pingpong statemachine driver
into a single function with a 'wait' argument: Curl_pp_statemach.
A call to Curl_ssl_connect() was accidentally left in when the SSL/TLS
connection layer was reworked in 7.29. Not only would this cause the
connection to block but had the additional overhead of calling the
non-blocking connect a little bit later.
This function was only used twice, both in places where performance
isn't crucial (socks + if2ip). Removing the use of this function removes
the need to have our private version for systems without it == reduced
amount of code.
Also, in the SOCKS case it is clearly better to fail gracefully rather
than to truncate the results.
This work was triggered by a bug report on the strcal prototype in
strequal.h.
strlcat was added in commit db70cd28 in February 2001!
Bug: http://curl.haxx.se/bug/view.cgi?id=1192
Reported by: Jeremy Huddleston
Fixed a null pointer reference when an empty challenge is passed to the
Curl_sasl_create_digest_md5_message() function.
Bug: http://sourceforge.net/p/curl/bugs/1193/
Reported by: Saran Neti
An ambiguity in the SSLWrite() documentation lead to a bad inference in the
code where we assumed SSLWrite() returned the amount of bytes written to
the socket, when that is not actually true; it returns the amount of data
that is buffered for writing to the socket if it returns errSSLWouldBlock.
Now darwinssl_send() returns CURLE_AGAIN if data is buffered but not written.
Reference URL: http://curl.haxx.se/mail/lib-2013-02/0145.html
Reworked the pp->endofresp() function so that the conndata, line and
line length are passed down to it just as with Curl_client_write()
rather than each implementation of the function having to query
these values.
Additionally changed the int return type to bool as this is more
representative of the function's usage.
Corrected the order of the upgrade_tls() functions and moved the handler
upgrade and getsock() functions out from the middle of the state related
functions.
Corrected the order of the pop3_state_capa() / imap_state_capability()
and the pop3_state_capa_resp() / imap_state_capability_resp() functions
to match the execution order.
Added honoring of the tls_supported flag when starting a TLS upgrade
rather than unconditionally attempting it. If the use_ssl flag is set
to CURLUSESSL_TRY and the server doesn't support TLS upgrades then the
connection will continue to authenticate. If this flag is set to
CURLUSESSL_ALL then the connection will complete with a failure as it
did previously.
Added honoring of the tls_supported flag when starting a TLS upgrade
rather than unconditionally attempting it. If the use_ssl flag is set
to CURLUSESSL_TRY and the server doesn't support TLS upgrades then the
connection will continue to authenticate. If this flag is set to
CURLUSESSL_ALL then the connection will complete with a failure as it
did previously.
Added honoring of the tls_supported flag when starting a TLS upgrade
rather than unconditionally attempting it. If the use_ssl flag is set
to CURLUSESSL_TRY and the server doesn't support TLS upgrades then the
connection will continue to authenticate. If this flag is set to
CURLUSESSL_ALL then the connection will complete with a failure as it
did previously.
Added sending of initial CAPABILITY command before STARTTLS is sent.
This allows for the detection of the capability before trying to
upgrade the connection.
Follow up fix to commit 62bd217464 to cater for servers that don't
respond with a 250 in their EHLO responses. Additionally updated the
SMTP tests to respond with a 250 response code as per RFC5321.
Fixed the SASL capability detection to include the space character
before the authentication mechanism list. Otherwise a capability such
as SASLSOMETHING would be interpreted as enabling SASL and potentially
trying to identify SOMETHING as a mechanism.
Previously if a problem was found with one of the server's certificates,
we'd log an OSStatus for the end user to look up. Now we explain what
was wrong with the site's certificate chain. Also un-did part of the
previous commit where the code wouldn't catch errSSLServerAuthCompleted
if built under Leopard.
Fixed a small issue where smtp_endofresp() would look for capabilities
in the description part of a failure response. In theory a server
shouldn't respond with SIZE or AUTH in an EHLO command's failure
response but if it did then capabilities would be unnecessarily set
before eventually failing.
Renamed the authstate1 and authstate2 variables in imap_authenticate()
as the old name was a left over from when there was only one state
variable which was named due to a clash with the state() function.
Additionally this provides consistency with the smtp module.
Running tests\libtest\libntlmconnect.exe reveals a 1 byte (!) leak in
./lib/curl_ntlm_msgs.c:
perl ..\memanalyze.pl c:memdebug.curl
Leak detected: memory still allocated: 1 bytes
At 9771e8, there's 1 bytes.
allocated by curl_ntlm_msgs.c:399
Snippet from curl_ntlm_msgs.c:
/* setup ntlm identity's domain and length */
dup_domain.tchar_ptr = malloc(sizeof(TCHAR) * (domlen + 1));
(my domlen == 0).
'dup_domain.tbyte_ptr' looks to be freed in Curl_ntlm_sspi_cleanup() via
'ntlm->identity.Domain'. But I see no freeing of 'dup_domain.tchar_ptr'.
This bug report properly identified that when doing SMTP and aborting
the transfer with a callback, it must be considered aborted prematurely
by the code to avoid QUIT etc to be attempted as that would cause a
hang.
The new test case 1507 verifies this behavior.
Reported by: Patricia Muscalu
Bug: http://curl.haxx.se/bug/view.cgi?id=1184
It turns out that Leopard (OS X 10.5) doesn't have constants for the ECDH
ciphers in its headers, so the cases for them have been taken out of the
build when building under Leopard. Also added a standard function for
getting a string description of a SecCertificateRef.
Changed the SMTP_AUTH_PASSWD state constant to SMTP_AUTH_LOGIN_PASSWD to
better describe the state as the second part of an AUTH LOGIN command,
as well as for consistency with the imap and pop3 modules.
Introduced detection of the SASL-IR capability, in order to add support
for sending the initial response with the AUTHENTICATE command, as per
RFC4959.
Updated the automatic response tag generation to follow the examples
given in RC3501, which list a 4 character string such as A001, A002,
etc.
As a unique identifier should be generated for each command the string
generation is based on the connection id and the incrementing command
id.
When negotiating SASL DIGEST-MD5 authentication, the function
Curl_sasl_create_digest_md5_message() uses the data provided from the
server without doing the proper length checks and that data is then
appended to a local fixed-size buffer on the stack.
This vulnerability can be exploited by someone who is in control of a
server that a libcurl based program is accessing with POP3, SMTP or
IMAP. For applications that accept user provided URLs, it is also
thinkable that a malicious user would feed an application with a URL to
a server hosting code targetting this flaw.
Bug: http://curl.haxx.se/docs/adv_20130206.html
config_h.com is a new file that generates a config.h file based on the
curl_config.h.in file and a quick scan of the configure script. This is
actually a generic procedure that is shared with other VMS packages.
The existing pre-built config-vms.h had over 100 entries that were not
correct and in some cases conflicted with the build options available in
the build_vms.com.
generate_config_vms_h_curl.com is a helper procedure to the
config_h.com. It covers the cases that the generic config_h.com is not
able to figure out, and accepts input from the build_vms.com procedure.
build_curlbuild_h.com is a new file to generate the curlbuild.h file
that Curl is now using when it is using a curl_config.h file.
post-config-vms.h is a new file that is needed to provide VMS specific
definitions, and most of them need to be set before the system header
files are included.
The VMS build procedure is fixed:
1. Fixed to link in the correct HP ssl library.
2. Fixed to detect if HP Kerberos is installed.
3. Fixed to detect if HP LDAP is installed.
4. Fixed to detect if gnv$libzshr is installed.
5. Simplified the input parameter parsing to not use a loop.
6. Warn that 64 bit pointer option support is not complete
in comments.
7. Default to IEEE floating if platform supports it so
resulting libcurl will be compatible with other
open source projects on VMS.
8. Default to LARGEFILE if platform supports it.
9. Default to enable SSL, LDAP, Kerberos, libz
if the libraries are present.
10. Build with exact case global symbols for libcurl.
11. Generate linker option file needed.
12. Compiler list option only commonly needed items.
13. fulllist option for those who really want it.
14. Create debug symbol file on Alpha, IA64.
By doing this unconditionally, we infer a simpler and more defined
behavior. This also has the upside that test 1021 no longer fails for me
even if I run with valgrind.
Also fixed some wrong comments.
According KB975858 this flag may cause problems on Windows 7 and
Windows Server 2008 R2 systems. Extended error information is not
currently used by libcurl and therefore not a requirement.
The flag may improve the SSL-connection shutdown in case of an
error. This means it might be a good improvement in the future.
Fixes bug/issue #1187 - thanks for the report
When a connection is no longer used, it is kept in the cache. If the
cache is full, the oldest idle connection is closed. If no connection is
idle, the current one is closed instead.
Tidied up code from commit 6b6bdc83bdUpdated where a few instances of
the pop3c struct variable used the longer conndata struct rather than
matching what other code in pop3_authenticate() used.
Fixed an issue where (lib)curl is compiled without support for a
supported challenge-response based SASL authentication mechanism, such
as CRAM-MD5 or NTLM, the server doesn't support the LOGIN or PLAIN
mechanisms and (lib)curl doesn't fallback to Clear Text authentication.
Note: In order to fallback to Clear Text authentication properly this
fix adds support for the LOGINDISABLED server capability.
imap: Fixed no known authentication mechanism when fallback is required
Fixed an issue where (lib)curl is compiled without support for a
supported challenge-response based SASL authentication mechanism, such
as CRAM-MD5 or NTLM, the server doesn't support the LOGIN or PLAIN
mechanisms and (lib)curl doesn't fallback to Clear Text authentication.
Note: In order to fallback to Clear Text authentication properly this
fix adds support for the LOGINDISABLED server capability.
Related bug: http://curl.haxx.se/mail/lib-2013-02/0004.html
Reported by: Stanislav Ivochkin
Fixed an issue where (lib)curl is compiled without support for a
supported challenge-response based SASL authentication mechanism, such
as CRAM-MD5 or NTLM, the server doesn't support the LOGIN or PLAIN
mechanisms and (lib)curl doesn't fallback to APOP or Clear Text
authentication.
Bug: http://curl.haxx.se/mail/lib-2013-02/0004.html
Reported by: Stanislav Ivochkin
Remove timeout argument that's never used.
Make the actual connection get detected on a single spot to reduce code
duplication.
Store the IPv6 state already when the connection is attempted.
There was a bug where, if SSLWrite() returned errSSLWouldBlock but did
succeed in transmitting at least something, then we'd incorrectly
resend the packet. Now we never take errSSLWouldBlock as a sign that
nothing was transferred to/from the server.
Bug: http://curl.haxx.se/mail/lib-2013-01/0295.html
Reported by: Bruno de Carvalho
Minor code tidy up to add comments similar to those used in the pop3
and imap end of resp functions, in order to assist anyone reading the
code and highlight the similarities between each of these protocols.
smtp_state_upgrade_tls() would attempt to incorrectly complete the
upgrade to smtps and start the EHLO command if
Curl_ssl_connect_nonblocking() returned a failure code and if ssldone
was set to TRUE. This would only happen when a non-blocking API hadn't
been provided by the SSL implementation and curlssl_connect() was
called underneath.
pop3_state_upgrade_tls() would attempt to incorrectly complete the
upgrade to pop3s and start the CAPA command if
Curl_ssl_connect_nonblocking() returned a failure code and if ssldone
was set to TRUE. This would only happen when a non-blocking API hadn't
been provided by the SSL implementation and curlssl_connect() was
called underneath.
imap_state_upgrade_tls() would attempt to incorrectly complete the
upgrade to imaps and start the CAPABILITY command if
Curl_ssl_connect_nonblocking() returned a failure code and if ssldone
was set to TRUE. This would only happen when a non-blocking API hadn't
been provided by the SSL implementation and curlssl_connect() was
called underneath.
- document the double-quote and backslash need be escaped if quoting.
- libcurl formdata escape double-quote in filename by backslash.
- curl formparse can parse filename both contains '"' and ',' or ';'.
- curl now can uploading file with ',' or ';' in filename.
Bug: http://curl.haxx.se/bug/view.cgi?id=1171
Fixed an issue where Curl_ssl_connect_nonblocking() wouldn't complete
correctly and the ssldone flag wouldn't be set to true for pop3s based
connections.
Bug introduced in commit: 4ffb8a6398.
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
Fixes initial proxy response being processed by the tunneled protocol
handler instead of the HTTP wrapper handler. This issue would trigger
upon delayed CONNECT response from the proxy.
Additionally fixes a multi interface code-path in which connections
would not time out properly.
This does not fix known bug #39.
URL: http://curl.haxx.se/mail/lib-2013-01/0191.html
This commit fixes a regression introduced in 052a08ff.
NSS caches certs/keys returned by the SSL_GetClientAuthDataHook callback
and if we connect second time to the same server, the cached cert/key
pair is used. If we use multiple client certificates for different
paths on the same server, we need to clear the session cache to force
NSS to call the hook again. The commit 052a08ff prevented the session
cache from being cleared if a client certificate from file was used.
The condition is now fixed to cover both cases: consssl->client_nickname
is not NULL if a client certificate from the NSS database is used and
connssl->obj_clicert is not NULL if a client certificate from file is
used.
Review by: Kai Engert
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
1. When the downloaded data file from Mozilla is current, but the output
bundle does not exist: continue processing to create the bundle. The
goal is to have the output file - not just download the latest input.
2. added -f option to force re-processing the file. Useful for
debugging/testing the process.
3. added support for output to '-' (stdout), allowing the output to be
piped.
4. All progress and error messages go to STDERR rather than STDOUT (3)
5. The script opened and closed the output file many times
unnecessarily. It now opens it once, does the output and closes it.
6. Backup of the input files happens after successful processing, not
before.
7. The output is written to a temporary file, and renamed to the
requested name after backup - this greatly reduces the window where the
file can be seen partially written.
8. all die calls have a \n at the end to suppress perl's traceback - the
traceback isn't useful to end users.
Patch: http://curl.haxx.se/mail/lib-2013-01/0045.html
lib/objnames.inc provides definition of curl_10char_object_name() shell
function. The intended purpose of this function is to transliterate a
(*.c) source file name that may be longer than 10 characters, or not,
into a string with at most 10 characters which may be used as an OS/400
object name.
Test case 1221 does unit testng of this function and also verifies
that it is possible to generate distinct short object names for all
curl and libcurl *.c source file names.
lib/objnames-test.sh is the shell script used for test case 1221.
tests/runtests.pl modified to accept shell script test cases.
More details inside lib/objnames.inc and lib/objnames-test.sh
* Changing the order of the state machine to represent the order in
which commands are sent to the server.
* Reworking the imap_endofresp() function as the FETCH response doesn't
include the command id and shouldn't be part of the length comparison
that takes into account the id string.
Fixed a problem with the state machine when attempting to log in with
invalid credentials. The server would report login failure but libcurl
would not read the response due to inappropriate IMAP_STOP states being
set after the login was sent.
Applied some of the comment and layout changes that had already been
applied to the pop3 and smtp code over the last 6 to 9 months.
This is in preparation of adding SASL based authentication.
... on Snow Leopard and Lion
Snow Leopard introduced the SSLSetSessionOption() function, but it
doesn't disable peer verification as expected on Snow Leopard or
Lion (it works as expected in Mountain Lion). So we now use sysctl()
to detect whether or not the user is using Snow Leopard or Lion,
and if that's the case, then we now use the deprecated
SSLSetEnableCertVerify() function instead to disable peer verification.
... it also clobbered the 'result' return value so that it wouldn't
return the error back to the parent function properly, which broke test
809 when run with 'multi-always'.
When prefixing a path with /~/ it is supposed to be used relative to the
user's home directory but it didn't work. Now we cut off the entire
three byte sequenct "/~/" which seems to be how OpenSSH does it.
Bug: http://curl.haxx.se/bug/view.cgi?id=1173
Reported by: Balaji Parasuram
Issue: When building a 32bit target with large file support HP-UX
<sys/socket.h> header file may simultaneously provide two different
sets of declarations for sendfile and sendpath functions, one with
static and another with external linkage. Given that we do not use
mentioned functions we really don't care which linkage is the
appropriate one, but on the other hand, the double declaration emmits
warnings when using the HP-UX compiler and errors when using modern
gcc versions resulting in fatal compilation errors.
Mentioned issue is now fixed as long as we don't use sendfile nor
sendpath functions.
A bundle is a list of all persistent connections to the same host.
The connection cache consists of a hash of bundles, with the
hostname as the key.
The benefits may not be obvious, but they are two:
1) Faster search for connections to reuse, since the hash
lookup only finds connections to the host in question.
2) It lays out the groundworks for an upcoming patch,
which will introduce multiple HTTP pipelines.
This patch also removes the awkward list of "closure handles",
which were needed to send QUIT commands to the FTP server
when closing a connection.
Now we allocate a separate closure handle and use that
one to close all connections.
This has been tested in a live system for a few weeks, and of
course passes the test suite.
BLANK_AT_MAKETIME may be used in our Makefile.am files to blank
LIBS variable used in generated makefile at makefile processing
time. Doing this functionally prevents LIBS from being used for
all link targets in given makefile.
This handling already works with the easy-interface code. When a request
is sent on a re-used connection that gets closed by the server at the
same time as the request is sent, the situation may occur so that we can
send the request and we discover the broken connection as a RECV_ERROR
in the PERFORM state and then the request needs to be retried on a fresh
connection. Test 64 broke with 'multi-always-internally'.
Although it is not explicitly stated in the documentation, NSS uses
*pRetCert and *pRetKey even if the client authentication hook returns
a failure. Namely, if we destroy *pRetCert without clearing *pRetCert
afterwards, NSS destroys the certificate once again, which causes a
double free.
Reported by: Bob Relyea
.. that are sent when auth-negotiating before a chunked
upload or when setting the 'Transfer-Encoding: chunked'
header and intentionally sending no content.
Adjust test565 and test1333 accordingly.
DNS cache entries populated with CURLOPT_RESOLVE were not properly freed
again when done using the multi interface.
Test case 1502 added to verify.
Bug: http://curl.haxx.se/bug/view.cgi?id=3575448
Reported by: Alex Gruz
If we use memory functions (malloc, free, strdup etc) in C sources in
libcurl and we fail to include curl_memory.h or memdebug.h we either
fail to properly support user-provided memory callbacks or the memory
leak system of the test suite fails.
After Ajit's report of a failure in the first category in http_proxy.c,
I spotted a few in the second category as well. These problems are now
tested for by test 1132 which runs a perl program that scans for and
attempts to check that we use the correct include files if a memory
related function is used in the source code.
Reported by: Ajit Dhumale
Bug: http://curl.haxx.se/mail/lib-2012-11/0125.html
When using only 1 second precision, curl doesn't create new cnonce
values quickly enough for all uses.
For example, issuing the following command multiple times to a recent
Tomcat causes authentication failures:
curl --digest -utest:test http://tomcat.test.com:8080/manager/list
This is because curl uses the same cnonce for several seconds, but
doesn't increment the nonce counter. Tomcat correctly interprets
this as a replay attack and rejects the request.
When microsecond-precision is available, this commit causes curl to
change cnonce values much more frequently.
With microsecond resolution, increasing the nounce length used in the
headers to 32 was made to further reduce the risk of duplication.
axTLS:
This will make the axTLS backend perform the RFC2818 checks, honoring
the VERIFYHOST setting similar to the OpenSSL backend.
Generic for OpenSSL and axTLS:
Move the hostcheck and cert_hostcheck functions from the lib/ssluse.c
files to make them genericly available for both the OpenSSL, axTLS and
other SSL backends. They are now in the new lib/hostcheck.c file.
CyaSSL:
CyaSSL now also has the RFC2818 checks enabled by default. There is a
limitation that the verifyhost can not be enabled exclusively on the
Subject CN field comparison. This SSL backend will thus behave like the
NSS and the GnuTLS (meaning: RFC2818 ok, or bust). In other words:
setting verifyhost to 0 or 1 will disable the Subject Alt Names checks
too.
Schannel:
Updated the schannel information messages: Split the IP address usage
message from the verifyhost setting and changed the message about
disabling SNI (Server Name Indication, used in HTTP virtual hosting)
into a message stating that the Subject Alternative Names checks are
being disabled when verifyhost is set to 0 or 1. As a side effect of
switching off the RFC2818 related servername checks with
SCH_CRED_NO_SERVERNAME_CHECK
(http://msdn.microsoft.com/en-us/library/aa923430.aspx) the SNI feature
is being disabled. This effect is not documented in MSDN, but Wireshark
output clearly shows the effect (details on the libcurl maillist).
PolarSSL:
Fix the prototype change in PolarSSL of ssl_set_session() and the move
of the peer_cert from the ssl_context to the ssl_session. Found this
change in the PolarSSL SVN between r1316 and r1317 where the
POLARSSL_VERSION_NUMBER was at 0x01010100. But to accommodate the Ubuntu
PolarSSL version 1.1.4 the check is to discriminate between lower then
PolarSSL version 1.2.0 and 1.2.0 and higher. Note: The PolarSSL SVN
trunk jumped from version 1.1.1 to 1.2.0.
Generic:
All the SSL backends are fixed and checked to work with the
ssl.verifyhost as a boolean, which is an internal API change.
The text "additional stuff not fine" text was added for debug purposes a
while ago, but it isn't really helping anyone and for some reason some
Linux distributions provide their libcurls built with debug info still
present and thus (far too many) users get to read this info.
The logic previously checked for a started NTLM negotiation only for
host and not also with proxy, leading to problems doing POSTs over a
proxy NTLM that are larger than 2000 bytes. Now it includes proxy in the
check.
Bug: http://curl.haxx.se/bug/view.cgi?id=3582321
Reported by: John Suprock
The existing logic only cut off the fragment from the separate 'path'
buffer which is used when sending HTTP to hosts. The buffer that held
the full URL used for proxies were not dealt with. It is now.
Test case 5 was updated to use a fragment on a URL over a proxy.
Bug: http://curl.haxx.se/bug/view.cgi?id=3579813
As a handle can be re-used after having done HTTP auth in a previous
request, it must make sure to clear out the HTTP types that aren't
wanted in this new request.
This reverts commit ce8311c7e4.
The commit made test 2024 work but caused a regression with repeated
Digest authentication. We need to fix this differently.
After a research team wrote a document[1] that found several live source
codes out there in the wild that misused the CURLOPT_SSL_VERIFYHOST
option thinking it was a boolean, this change now bans 1 as a value and
will make libcurl return error for it.
1 was never a sensible value to use in production but was introduced
back in the days to help debugging. It was always documented clearly
this way.
1 was never supported by all SSL backends in libcurl, so this cleanup
makes the treatment of it unified.
The report's list of mistakes for this option were all PHP code and
while there's a binding layer between libcurl and PHP, the PHP team has
decided that they have an as thin layer as possible on top of libcurl so
they will not alter or specifically filter a 'TRUE' value for this
particular option. I sympathize with that position.
[1] = http://daniel.haxx.se/blog/2012/10/25/libcurl-claimed-to-be-dangerous/
Since automake 1.12.4, the warnings are issued on running automake:
warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Avoid INCLUDES and roll these flags into AM_CPPFLAGS.
Compile tested on:
Ubuntu 10.04 (automake 1:1.11.1-1)
Ubuntu 12.04 (automake 1:1.11.3-1ubuntu2)
Arch Linux (automake 1.12.4)
As pointed out in Bug report #3579064, curl_multi_perform() would
wrongly use a blocking mechanism internally for some commands which
could lead to for example a very long block if the LIST response never
showed.
The solution was to make sure to properly continue to use the multi
interface non-blocking state machine.
The new test 1501 verifies the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3579064
Reported by: Guido Berhoerster
When given a string as 'srp' it didn't work, but required 'SRP'.
Starting now, the check disregards casing.
Bug: http://curl.haxx.se/bug/view.cgi?id=3578418
Reported by: Jeff Connelly
Previously the Metalink code used Apple's CommonCrypto library only if
curl was built using the --with-darwinssl option. Now we use CommonCrypto
on all Apple operating systems including Tiger or later, or iOS 5 or
later, so you don't need to build --with-darwinssl anymore. Also rolled
out this change to libcurl's md5 code.
The iOS build was broken by a reference to a function that only existed
under OS X; fixed. Also fixed a hard-to-reproduce problem where, if the
server disconnected before libcurl got the chance to hang up first and
SecureTransport was in use, then we'd raise an error instead of failing
gracefully.
This is a minor change in behavior after having been pointed out by Mark
Tully and discussed on the list. Initially this case would internally
call poll() with no sockets and a timeout which would equal a sleep for
that specified time.
Bug: http://curl.haxx.se/mail/lib-2012-10/0076.html
Reported by: Mark Tully
Since there are servers that seem to return very big encrypted
data packages, we need to be able to handle those without having
an internal size limit. To avoid the buffer growing to fast to
early the initial size was decreased and the minimum free space
in the buffer was decreased as well.
During the periods of rate limitation, the speedcheck function wasn't
called and thus the values weren't updated accordingly and it would then
easily trigger wrongly once data got transferred again.
Also, the progress callback's return code was not acknowledged in this
state so it could make an "abort" return code to get ignored and not
have the documented effect of aborting an ongoing transfer.
Bug: http://curl.haxx.se/mail/lib-2012-09/0081.html
Reported by: Jie He
The Curl_reconnect_request() function could end up returning a pointer
to a free()d struct when Curl_done() failed inside. Clearing the pointer
unconditionally after Curl_done() avoids this risk.
Reported by: Ho-chi Chen
Bug: http://curl.haxx.se/mail/lib-2012-09/0188.html
Selected socks proxy in Google's Chrome browser. Resulting in the
following environment variables:
NO_PROXY=localhost,127.0.0.0/8
ALL_PROXY=socks://localhost:1080/
all_proxy=socks://localhost:1080/
no_proxy=localhost,127.0.0.0/8
... and libcurl didn't treat 'socks://' as socks but instead picked HTTP
proxy.
Reported by: Scott Bailey
Bug: http://curl.haxx.se/bug/view.cgi?id=3566860
Each certificate section of the input certdata.txt file has a trust
section following it with details.
This script failed to detect the start of the trust for at least one
cert[*], which made the script continue pass that section into the next
one where it found an 'untrusted' marker and as a result that certficate
was not included in the output.
[*] = "Hellenic Academic and Research Institutions RootCA 2011"
Bug: http://curl.haxx.se/mail/lib-2012-09/0019.html
SMTP client will send SIZE parameter in MAIL FROM command only if server
supports it. Without this patch server might say "504 Command parameter
not implemented" and reject the message.
Bug: http://curl.haxx.se/bug/view.cgi?id=3564114
/*
* Name: curl_multi_wait()
*
* Desc: Poll on all fds within a CURLM set as well as any
* additional fds passed to the function.
*
* Returns: CURLMcode type, general multi error code.
*/
CURL_EXTERN CURLMcode curl_multi_wait(CURLM *multi_handle,
struct curl_waitfd extra_fds[],
unsigned int extra_nfds,
int timeout_ms);
In Mountain Lion, Apple added TLS 1.1 and 1.2, and deprecated a number
of SecureTransport functions, some of which we were using. We now check
to see if the replacement functions are present, and if so, we use them
instead. The old functions are still present for users of older
cats. Also fixed a build warning that started to appear under Mountain
Lion
Commit b91d29a28e170c16d65d956db79f2cd3a82372d2 introduces a bug and breaks Curl_closesocket function. sock_accepted flag for the second socket should be tagged as TRUE before the sockopt callback is called because in case the callback returns an error, Curl_closesocket function is going to call the - fclosesocket - callback for the accept()ed socket
For active FTP connections, applications may need setting the sockopt after accept() call returns successful. This fix gives a call to the callback registered with CURL_SOCKOPTFUNCTION option. Also a new sock type - CURLSOCKTYPE_ACCEPT - is added. This type is to be passed to application callbacks with - purpose - parameter. Applications may use this parameter to distinguish between socket types.
Commit e351972bc8 brought in the ssh agent support but some uses of
the libssh2 agent API was done unconditionally which wasn't good enough
since that API hasn't always been present.
By reading the ->head pointer and using that instead of the ->size
number to figure out if there's a list remaining we avoid the (false
positive) clang-analyzer warning that we might dereference of a null
pointer.
I suspect this is a regression introduced in commit 207cf150, included
since 7.24.0.
Avoid showing '(nil)' as hostname in verbose output by making sure the
hostname fixup function is called early enough to set the pointers that
are used for this. The name data is set again for each request even for
re-used connections to handle multiple hostnames over the same
connection (like with proxy) or that the casing etc of the host name is
changed between requests (which has proven to be important at least once
in the past).
Test1011 was modified to use a redirect with a re-used a connection
since it then showed the bug and now lo longer does. There's currently
no easy way to have the test suite detect 'nil' texts in verbose ouputs
so no tests will detect if this problem gets reintroduced.
Bug: http://curl.haxx.se/mail/lib-2012-07/0111.html
Reported by: Gisle Vanem
We found a problem with ftp transfer using libcurl (7.23 and 7.25)
inside an application which is receiving unix signals (SIGUSR1,
SIGUSR2...) almost continuously. (Linux 2.4, PowerPC, HAVE_POLL_FINE
defined).
Curl_socket_check() uses poll() to wait for the socket, and retries it
when a signal is received (EINTR). However, if a signal is received and
it also happens that the timeout has been reached, Curl_socket_check()
returns -1 instead of 0 (indicating an error instead of a timeout).
In our case, the result is an aborted connection even before the ftp
banner is received from the server, and a return value of
CURLE_OUT_OF_MEMORY from curl_easy_perform() (Curl_pp_multi_statemach(),
in pingpong.c, actually returns OOM if Curl_socket_check() fails :-)
Funny to debug on a system on which OOM is a possible cause).
Bug: http://curl.haxx.se/mail/lib-2012-07/0122.html
Due to WSAPoll bugs, libcurl does not work as intended. When the cURL
library is used to setup a connection to an incorrect port, normally the
result is CURLE_COULDNT_CONNECT, /* 7 */, but due to the bug in WSAPoll,
the result now is CURLE_OPERATION_TIMEDOUT, /* 28 - the timeout time was
reached */.
On August 1, Jan Koen Annot opened a case for this to Microsoft Premier
Online (https://premier.microsoft.com/). The support engineer handling
the case wrote that the case description is quite clear. He will try to
reproduce the issue and then proceed with troubleshooting it.
Reported by: Jan Koen Annot
Bug: http://curl.haxx.se/mail/lib-2012-07/0310.html
When figuring out if the data stream needs to be rewound when the
request is to be resent, we must not access the HTTP struct unless the
protocol used is indeed HTTP...
Bug: http://curl.haxx.se/bug/view.cgi?id=3544688
Previously the curl_multi interface would freeze if darwinssl was
enabled and at least one of the handles tried to connect to a Web site
using HTTPS. Removed the "wouldblock" state darwinssl was using because
I figured out a solution for our "would block but in which direction?"
dilemma.
In many states the easy_conn pointer is referenced and just assumed to
be working. This is an added extra check since analyzing indicates
there's a risk we can end up in these states with a NULL pointer there.
A HEAD response has no body length and gets the headers like the
corresponding GET would so it should not get closed after the response
based on the same rules. This mistake caused connections that did HEAD
to get closed too often without a valid reason.
Bug: http://curl.haxx.se/bug/view.cgi?id=3542731
Reported by: Eelco Dolstra
The function https_getsock was only implemented properly when USE_SSLEAY
or USE_GNUTLS is defined, but it is also necessary for USE_SCHANNEL.
The problem occurs when Curl_read_plain or Curl_write_plain returns
CURLE_AGAIN. In that case CURL_OK is returned to the multi-interface an
the used socket is set to state CURL_POLL_REMOVE and the easy-state is
set to CURLM_STATE_PROTOCONNECT. This is fine, because later the socket
should be set to CURL_POLL_IN or CURL_POLL_OUT via multi_getsock. That's
where https_getsock is called and doesn't return any sockets.
The code was printing a warning when SNI was set up successfully. Oops.
Printing the cipher number in verbose mode was something only TLS/SSL
programmers might understand, so I had it print the name of the cipher,
just like in the OpenSSL code. That'll be at least a little bit easier
to understand. The SecureTransport API doesn't have a method of getting
a string from a cipher like OpenSSL does, so I had to generate the
strings manually.
When doing CONNECT requests, libcurl must make sure the connection is
alive as much as possible. NTLM requires it and it is generally good for
other cases as well.
NTLM over CONNECT requests has been broken since this regression I
introduced in my CONNECT cleanup commits that started with 41b0237834,
included since 7.25.0.
Bug: http://curl.haxx.se/bug/view.cgi?id=3538625
Reported by: Marcel Raad
Allow NTLM authentication when building using SecureTransport (Darwin) for SSL.
This uses CommonCrypto, a cryptography library that ships with all versions of
iOS and Mac OS X. It's like OpenSSL's libcrypto, except that it's missing a few
less-common cyphers and doesn't have a big number data structure.
Before commit 2dded8fedb (dec 2010) there was logic that used
RAND_screen() at times and now I remove the leftover #ifdef check for
it.
The seeding code that uses Curl_FormBoundary() in ossl_seed() is dubious
to keep since it hardly increases randomness but I fear I'll break
something if I remove it now...
- Renamed st_ function prefix to darwinssl_
- Renamed Curl_st_ function prefix to Curl_darwinssl_
- Moved the duplicated ssl_connect_done out of the #ifdef in lib/urldata.h
- Fixed a teensy little bug that made non-blocking connection attempts block
- Made it so that it builds cleanly against the iOS 5.1 SDK
Removed two, not intended to exist, RESOURCE declarations.
Bug: http://curl.haxx.se/bug/view.cgi?id=3535977
And sorted configuration hunks to reflect same internal order
as the one shown in the usage message.
Increase decrypted and encrypted cache buffers using limitted
doubling strategy. More information on the mailinglist:
http://curl.haxx.se/mail/lib-2012-06/0255.html
It updates the two remaining reallocations that have already been there
and fixes the other one to use the same "do we need to increase the
buffer"-condition as the other two. CURL_SCHANNEL_BUFFER_STEP_SIZE was
renamed to CURL_SCHANNEL_BUFFER_FREE_SIZE since that is actually what it
is now. Since we don't know how much more data we are going to read
during the handshake, CURL_SCHANNEL_BUFFER_FREE_SIZE is used as the
minimum free space required in the buffer for the next operation.
CURL_SCHANNEL_BUFFER_STEP_SIZE was used for that before, too, but since
we don't have a step size now, the define was renamed.
Process extra data buffer before returning from schannel_connect_step2.
Without this change I've seen WinCE hang when schannel_connect_step2
returns and calls Curl_socket_ready.
If the encrypted handshake does not fit in the intial buffer (seen with
large certificate chain), increasing the encrypted data buffer is necessary.
Fixed warning in curl_schannel.c line 1215.
Implemented timeout loop in schannel_send while sending data. This
is as close as I think we can get to write buffering; I put a big
comment in to explain my thinking.
With some committer adjustments
Make the Schannel implementation use libcurl's default buffer size
for the initial received encrypted and decrypted data cache buffers.
The implementation still needs to handle more data since more data
might have already been received or decrypted during the handshake
or a read operation which needs to be cached for the next read.
curl_schannel.c - implemented graceful SSL shutdown. If we fail to
shutdown the connection gracefully, I've seen schannel try to use a
session ID for future connects and the server aborts the connection
during the handshake.
curl_schannel.c - auto certificate validation doesn't seem to work
right on CE. I added a method to perform the certificate validation
which uses CertGetCertificateChain and manually handles the result.
Coverity actually pointed out flawed logic in the previous call to
Curl_strntoupper() where the code used sizeof() of a pointer to pass in
a size argument. That code still worked since it only needed to
uppercase 4 letters. Still, the entire malloc/uppercase/free sequence
was pointless since the code has already matched the string once in the
condition that starts the block of code.
As spotted by Coverity, va_end() was not used previously. To make it
used I took away a bunch of return statements and made them into
assignments instead.
SSPI related code now compiles with ANSI and WCHAR versions of security
methods (WinCE requires WCHAR versions of methods).
Pulled UTF8 to WCHAR conversion methods out of idn_win32.c into their own file.
curl_sasl.c - include curl_memory.h to use correct memory functions.
getenv.c and telnet.c - WinCE compatibility fix
With some committer adjustments
Building with CyaSSL failed compilation. Reason being that OCSP_REQUEST and
OCSP_RESPONSE are enum values in CyaSSL and defines in <wincrypt.h> included
via <winldap.h> in ldap.c.
http://curl.haxx.se/mail/lib-2012-06/0196.html
Version number is removed in order to make this info consistent with
how we do it with other MS and Linux system libraries for which we don't
provide this info.
Identifier changed from 'WinSSPI' to 'schannel' given that this is the
actual provider of the SSL/TLS support. libcurl can still be built with
SSPI and without SCHANNEL support.
Removed obsolete minor status variable and parameter of status function
which was never used or set at all. Also Curl_sspi_strerror does support
only one status and there is no need for a second sub status.
Added Windows SSPI version information to the curl version string when
SCHANNEL SSL is not enabled, as the version of the library should also
be included when SSPI is used to generate security contexts.
Removed SSPI from the feature list as the features are GSS-Negotiate,
NTLM and SSL depending on the usage of the SSPI library.
Removed duplicate blank lines.
Removed spaces between the not and test in various if statements.
Removed explicit test of NULL in an if statement.
Placed function returns on same line as function declarations.
Replaced the use of curl_maprintf() with aprintf() as it is the
preprocessor job to do this substitution if ENABLE_CURLX_PRINTF
is set.
curl_sspi.c: Fixed mingw32-gcc compiler warnings
curl_sspi.c: Fixed length of error code hex output
The hex value was printed as signed 64-bit value on 64-bit systems:
SEC_E_WRONG_PRINCIPAL (0xFFFFFFFF80090322)
It is now correctly printed as the following:
SEC_E_WRONG_PRINCIPAL (0x80090322)
curl_sspi.c: Fallback to security function table version number
Instead of reporting an unknown version, the interface version is used.
curl_sspi.c: Removed SSPI/ version prefix from Curl_sspi_version
curl_schannel: Replaced static buffer sizes with defined names
curl_schannel.c: First brace when declaring functions on column 0
curl_schannel.c: Put the pointer sign directly at variable name
curl_schannel.c: Use structs directly instead of typedef'ed structs
curl_schannel.c: Removed space before opening brace
curl_schannel.c: Fixed lines being longer than 80 chars
