Dan Fandrich
640974fb28
If a HTTP request is Basic and num is already >=1000, the HTTP test server
...
adds 1 to num to get the data section to return. This allows testing
authentication negotiations using the Basic authentication method.
2008-11-25 23:23:47 +00:00
Dan Fandrich
0fa14c8662
Fully clean up after test 608 so that it can be run twice in succession.
2008-11-24 22:06:43 +00:00
Daniel Stenberg
ba9f8c674c
restored from my messy previous commit mistake
2008-11-21 07:47:31 +00:00
Daniel Stenberg
40e8b4e527
- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is
...
used. It has been used since forever but it was never a good idea to use
unless explicitly asked for.
2008-11-19 22:00:14 +00:00
Daniel Stenberg
4741e64c89
Josef Wolf's extension that allows a $TESTDIR/gdbinit$testnum file that when
...
you use runtests.pl -g, will be sourced by gdb to allow additional fancy
or whatever you see fit
2008-11-19 21:56:11 +00:00
Dan Fandrich
cdd6054e08
Display the time in verbose mode during the torture tests to help determine
...
when the tests stall.
2008-11-17 20:24:13 +00:00
Dan Fandrich
d1f063c62d
Shortened some FTP responses to allow the timeout to be reduced by a second
...
while still causing a timeout during the data phase.
2008-11-13 01:45:59 +00:00
Dan Fandrich
b2ed1e2607
Fixed an OOM problem with test 560
2008-11-12 22:26:06 +00:00
Dan Fandrich
fb8870297d
Give the test an extra second to run so it passes on slow machines
2008-11-12 01:04:27 +00:00
Daniel Stenberg
d07d1a6ef8
Added test case 560:
...
This test was added after the HTTPS-using-multi-interface with OpenSSL
regression of 7.19.1 to hopefully prevent this embarassing mistake from
appearing again... Unfortunately the bug wasn't triggered by this test, which
presumably is because the connect to a local server is too fast/different
compared to the real/distant servers we saw the bug happen with.
2008-11-11 21:59:25 +00:00
Daniel Stenberg
8bdd60fa71
Added missing <keywords>
2008-11-11 21:58:41 +00:00
Yang Tse
95a849efc2
terminate with appropriate exit code
2008-11-07 12:22:43 +00:00
Dan Fandrich
2903a5c050
Added test 1086 to test a timeout the occurs during an FTP data transfer.
2008-11-06 00:13:18 +00:00
Dan Fandrich
4d50b9f1f1
Make the SLOWDOWN option slow the FTP data connection, not just the
...
control connection.
2008-11-06 00:10:58 +00:00
Yang Tse
02fc7bb5f6
fix OOM handling
2008-10-31 14:46:48 +00:00
Yang Tse
0ce97f77e0
Use our Curl_addrinfo definition even when an addrinfo struct is available.
...
Use a wrapper function to call system's getaddrinfo().
2008-10-30 13:45:25 +00:00
Dan Fandrich
dc31387c6f
SLOWDOWN actually causes a 0.01 second delay between bytes
2008-10-30 01:44:18 +00:00
Dan Fandrich
a10044e110
Changed the "resolve" test precheck program to verify that an IPv6 socket
...
can be created before resolving the IPv6 name. In the context of running
a test, it doesn't make sense to run an IPv6 test when a host is resolvable
but IPv6 isn't usable. This should fix failures of test 1085 on hosts with
library and DNS support for IPv6 but where actual use of IPv6 has been
administratively disabled.
2008-10-28 20:03:22 +00:00
Yang Tse
b17ca44f0b
fix test # 558 and 559 CFLAGS
2008-10-28 00:35:08 +00:00
Yang Tse
9230708e47
don't skip tests 558 and 559 on i686 icc autobuilds
2008-10-27 20:09:35 +00:00
Yang Tse
92f3b3895e
test #558 tests internal hash create/destroy
...
test #559 tests internal hash create/add/destroy
2008-10-27 20:01:58 +00:00
Yang Tse
310d842b70
Skip test #558 when libcurl is built with hidden symbols
2008-10-27 14:02:50 +00:00
Yang Tse
1498de83d6
For tracing purposes log a fake call to getaddrinfo
...
when allocating/building the fake Curl_addrinfo.
2008-10-27 08:20:36 +00:00
Yang Tse
39e5fa6ae8
avoid using Curl_ip2addr(), simply build up a fake Curl_addrinfo
2008-10-27 03:00:47 +00:00
Yang Tse
dc289aa4fa
convert test #558 into something more interesting, attempting
...
now to minimally exercise some internal hash routines.
2008-10-26 21:40:20 +00:00
Yang Tse
6db8f53445
test #558 verifies loop operation using malloc() and free()
2008-10-26 03:03:29 +00:00
Yang Tse
068ba17e21
moved some definitions from tftp.h to tftpd.c
2008-10-23 14:34:08 +00:00
Yang Tse
4d10c96aa6
fix compiler warning
2008-10-23 14:07:28 +00:00
Dan Fandrich
9391d980c3
Tweaked a few tests to test proper Turkish locale handling
2008-10-23 01:53:27 +00:00
Yang Tse
81e48ada47
For i686 icc autobuilds:
...
Re-enable all tests for debug-enabled builds.
For debug-disabled builds only 8 tests are enabled.
2008-10-22 15:03:15 +00:00
Dan Fandrich
7ff38c14a9
Fixed some problems with SFTP range support to fix test cases 634 through 637.
2008-10-21 07:10:25 +00:00
Dan Fandrich
7ded272b94
Added missing HTTP proxy and other keywords
2008-10-16 21:34:34 +00:00
Dan Fandrich
357383159e
A <precheck> command is considered to have failed if it returns a non-zero
...
return code. This way, if the precheck command can't be run at all for
whatever reason, it's treated as a precheck failure which causes the
test to be skipped.
2008-10-15 17:41:02 +00:00
Yang Tse
e16bccbb91
attempt to fix compiler warning:
...
`variable' might be clobbered by `longjmp' or `vfork'
2008-10-14 17:35:25 +00:00
Dan Fandrich
a102c2c22b
Don't rely on shell support to run multiple precheck tests
2008-10-13 20:41:02 +00:00
Dan Fandrich
d74d3fe851
Ensure the IPv6 stack is operational before running this test (other tests
...
use the startup of the IPv6 test server as a substitute check for this).
2008-10-12 05:27:26 +00:00
Dan Fandrich
5ecff1e4c3
Added HTTP as a required feature
2008-10-09 18:53:17 +00:00
Dan Fandrich
f6d80d66a2
Added tests 633 through 637 to test the new file range support for SFTP.
...
All but the first test cause an infinite loop or other failure and so
are added to DISABLED.
2008-10-09 05:16:06 +00:00
Daniel Stenberg
830018aa38
- Bug #2152270 ( http://curl.haxx.se/bug/view.cgi?id=2152270 ) identified and
...
fixed a CURLINFO_REDIRECT_URL memory leak and an additional wrong-doing:
Any subsequent transfer with a redirect leaks memory, eventually crashing
the process potentially.
Any subsequent transfer WITHOUT a redirect causes the most recent redirect
that DID occur on some previous transfer to still be reported.
2008-10-08 22:01:23 +00:00
Dan Fandrich
8dfddd279b
Added tests 1082 through 1085 to test symbolic --interface parameters
2008-10-08 21:46:55 +00:00
Dan Fandrich
11a8a25528
Created test cases 1080 and 1081 to reproduce a problem of
...
CURLINFO_REDIRECT_URL leaking memory and returning incorrect results when
two URLs are requested. Reported by vmpdemo in bug #2152270
2008-10-08 03:32:10 +00:00
Dan Fandrich
95456b8e78
Added const to some pointer variables
2008-10-08 01:17:51 +00:00
Dan Fandrich
b9ce871463
Changed the handling of read/write errors in Curl_perform() to allow a
...
a fresh connection to be made in such cases and the request retransmitted.
This should fix test case 160. Added test case 1079 in an attempt to
test a similar connection dropping scenario, but as a race condition, it's
hard to test reliably.
2008-10-07 23:15:02 +00:00
Dan Fandrich
feeabd08ab
Document how to disable tests when certain --disable-* flags are used.
2008-10-07 20:28:25 +00:00
Yang Tse
445e4a9792
revert change introduced in tftpd.c revision 1.44
2008-10-03 03:42:44 +00:00
Yang Tse
9cea2dfb8f
fix compiler warning: dereferencing type-punned pointer will break strict-aliasing rules
2008-10-02 14:44:18 +00:00
Yang Tse
26a651f7ae
fix compiler warning: variable' might be clobbered by
longjmp' or `vfork'
2008-10-02 13:28:10 +00:00
Yang Tse
ac0e0351a0
runtests.pl enables picky compiler warnings unless explicitly disabled
2008-10-02 03:59:25 +00:00
Dan Fandrich
88513d2d1a
Fixed some compiler warnings with gcc
2008-10-01 17:34:24 +00:00
Dan Fandrich
d3fdbe48ae
Added "HTTP proxy" keyword
2008-09-30 17:18:27 +00:00
Daniel Stenberg
038542ea3e
- The libcurl FTP code now returns CURLE_REMOTE_FILE_NOT_FOUND error when SIZE
...
gets a 550 response back for the cases where a download (or NOBODY) is
wanted. It still allows a 550 as response if the SIZE is used as part of an
upload process (like if resuming an upload is requested and the file isn't
there before the upload). I also modified the FTP test server and a few test
cases accordingly to match this modified behavior.
2008-09-30 09:51:58 +00:00
Dan Fandrich
372203f1fa
Added "HTTP proxy" and "proxytunnel" keywords where applicable
2008-09-29 22:44:04 +00:00
Yang Tse
a632f6d5b1
if a test execution is aborted due to a signal, and the process
...
returns no other exitcode, use 2000 + signal number as return code
2008-09-26 18:56:56 +00:00
Yang Tse
42271ad463
use shift right. Division result is not integral.
2008-09-26 14:08:33 +00:00
Yang Tse
57ee847ce7
Avoid the use of the '? :' operator inside the call to our
...
test-server logging function. It doesn't work on some systems.
2008-09-26 11:21:22 +00:00
Yang Tse
985bd18904
attempt to avoid HTTP server startup misdetection on some systems
2008-09-26 01:08:24 +00:00
Yang Tse
2d1f798d14
fix potential buffer overflow in test-server logging function
2008-09-26 00:17:01 +00:00
Yang Tse
82107a02f5
Re-enable test #100 on i686 icc autobuilds
2008-09-24 01:29:23 +00:00
Daniel Stenberg
42224594b6
remove the entire comment now when we no longer set TZ
2008-09-23 11:02:56 +00:00
Daniel Stenberg
d369a2b775
- Introducing Jamie Lokier's function for date to epoch conversion used in the
...
date parser function. This makes our function less dependent on system-
provided functions and instead we do all the magic ourselves. We also no
longer depend on the TZ environment variable.
2008-09-23 11:00:01 +00:00
Daniel Stenberg
391e8afd1f
- Made the SOCKS code use the new Curl_read_plain() function to fix the bug
...
Markus Moeller reported: http://curl.haxx.se/mail/archive-2008-09/0016.html
- recv() errors other than those equal to EAGAIN now cause proper
CURLE_RECV_ERROR to get returned. This made test case 160 fail so I've now
disabled it until we can figure out another way to exercise that logic.
2008-09-22 23:12:00 +00:00
Daniel Stenberg
de48e4e4df
better description
2008-09-22 21:33:18 +00:00
Yang Tse
1e076a4ae0
Re-enable tests #1 on i686 icc autobuilds
2008-09-22 18:55:42 +00:00
Dan Fandrich
abe61b9926
Fixed test 539 to handle an out of memory condition that shows up now
...
that memdebug.h is included in the test programs.
2008-09-22 17:20:29 +00:00
Yang Tse
2b767161da
fix compiler warning: defined but not used
2008-09-21 04:02:13 +00:00
Yang Tse
7c9631081d
fix compiler warning: external declaration in primary source file
2008-09-21 03:48:25 +00:00
Yang Tse
b6f29bef06
fix compiler warning: defined but not used
2008-09-21 02:35:20 +00:00
Yang Tse
fe5f448015
fix compiler warning: external definition with no prior declaration
2008-09-20 12:33:02 +00:00
Yang Tse
7beb473a3d
include "memdebug.h"
2008-09-20 04:26:55 +00:00
Yang Tse
f7ef60c13f
fix compiler warning: external definition with no prior declaration
2008-09-18 19:17:28 +00:00
Yang Tse
8b2bfa4212
fix compiler warning: external definition with no prior declaration
2008-09-18 19:02:40 +00:00
Yang Tse
a6c915aab9
fix compiler warning: external declaration in primary source file
2008-09-18 16:21:09 +00:00
Dan Fandrich
974145f61c
Changed the test data file so it passes an XML syntax check
2008-09-15 22:35:09 +00:00
Yang Tse
eae27d1788
Disable all tests on i686 icc autobuilds to inspect build messages
2008-09-08 16:50:04 +00:00
Dan Fandrich
c3d871aef4
Added HTTP 1.0 downgrade tests with proxies
2008-09-06 18:24:04 +00:00
Yang Tse
59e378f48f
remove unnecessary typecasting of malloc()
2008-09-06 05:29:05 +00:00
Dan Fandrich
91ff938035
Improved the logic the decides whether to use HTTP 1.1 features or not in a
...
request.
Detect cases where an upload must be sent chunked and the server supports
only HTTP 1.0 and return CURLE_UPLOAD_FAILED.
2008-09-05 17:58:53 +00:00
Daniel Stenberg
18110b519c
- Martin Drasar provided the CURLOPT_POSTREDIR patch. It renames
...
CURLOPT_POST301 (but adds a define for backwards compatibility for you who
don't define CURL_NO_OLDIES). This option allows you to now also change the
libcurl behavior for a HTTP response 302 after a POST to not use GET in the
subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the
patch somewhat before commit. The curl tool got a matching --post302
option. Test case 1076 was added to verify this.
2008-09-05 16:13:20 +00:00
Daniel Stenberg
780f13db30
Stefan Krause's mail to curl-library at 03 Sep 2008 made me add these two
...
new date strings to get tested too.
2008-09-05 08:15:21 +00:00
Yang Tse
8733e087d7
fix print formatting string directives
2008-09-04 05:29:10 +00:00
Dan Fandrich
85a79f9d67
Added tests 1071 through 1074 to test automatic downgrading from HTTP 1.1
...
to HTTP 1.0 upon receiving a response from the HTTP server. Tests 1072
and 1073 are similar to test 1069 in that they involve the impossible
scenario of sending chunked data to a HTTP 1.0 server. All these currently
fail and are added to DISABLED.
Added test 1075 to test --anyauth with Basic authentication.
2008-08-29 23:42:39 +00:00
Daniel Stenberg
d24465b79a
test 1070 added
2008-08-29 10:48:27 +00:00
Daniel Stenberg
c67a99ff27
- When libcurl was doing a HTTP POST and the server would respond with
...
"Connection: close" and actually close the connection after the
response-body, libcurl could still have outstanding data to send and it
would not properly notice this and stop sending. This caused weirdness and
sad faces. http://curl.haxx.se/bug/view.cgi?id=2080222
Note that there are still reasons to consider libcurl's behavior when
getting a >= 400 response code while sending data, as Craig Perras' note
"http upload: how to stop on error" specifies:
http://curl.haxx.se/mail/archive-2008-08/0138.html
2008-08-29 10:47:59 +00:00
Daniel Stenberg
e138ae5ec9
- I'm abandoning the system with the web site mirrors (but keeping download
...
files bing mirrored) and thus I've changed the URL in the cookiejar header
to no longer use curlm.haxx.se but instead use the main site curl.haxx.se
2008-08-28 11:35:54 +00:00
Dan Fandrich
8ce78ca488
Fixed test case 1065 by changing the handling of CURLOPT_UPLOAD to set
...
the HTTP method to GET (or HEAD) when given a value of 0.
2008-08-28 06:28:07 +00:00
Dan Fandrich
370c3afc71
Added test 1069 to test PUT from stdin without content length. It fails
...
in a similar manner to test 1065 so is added to DISABLED.
2008-08-28 02:24:46 +00:00
Dan Fandrich
93357ef017
Added test 1069 to test PUT from stdin without content length. It fails
...
in a similar manner to test 1065 so is added to DISABLED.
2008-08-28 02:18:44 +00:00
Dan Fandrich
753592cc70
Added test case 1068 to do a simple HTTP PUT from stdin
2008-08-28 02:03:54 +00:00
Dan Fandrich
fc09d10560
Added multi keyword
2008-08-26 20:21:59 +00:00
Dan Fandrich
59b2e3ea4a
Added multi keyword
2008-08-26 20:11:12 +00:00
Yang Tse
d744c85310
Re-enable all tests on x86_64 and ia64.
2008-08-24 23:26:07 +00:00
Yang Tse
62d94ff342
Fix wrong signed int formatting string directive in test case #557 .
...
This error did not cause test failures on systems where sizeof(int) == sizeof(long).
2008-08-24 17:10:24 +00:00
Yang Tse
71d3c5bf41
Disable all tests except #557 on x86_64 and ia64 to debug trace curl_mprintf() on these systems.
2008-08-24 15:57:52 +00:00
Daniel Stenberg
b34390017b
added test case 1067 to verify --referer "firstone.html;auto"
2008-08-23 21:27:58 +00:00
Daniel Stenberg
a604682805
Andy Tsouladze's fix to kill the knowledge of servers properly after they have
...
been killed.
2008-08-23 11:25:14 +00:00
Dan Fandrich
e3ad6d2bd1
Fixed a problem when --dump-header - was given with more than one URL,
...
which caused an error when the second header was dumped due to stdout
being closed. Added test case 1066 to verify. Also fixed a potential
problem where a closed file descriptor might be used for an upload
when more than one URL is given.
2008-08-22 22:57:25 +00:00
Yang Tse
e5b713ee63
Increase to 20 the number of CVS update retries.
2008-08-22 18:18:20 +00:00
Yang Tse
95cef39def
Test case 557 now also verifies signed and unsigned int formatting.
2008-08-21 05:19:40 +00:00
Yang Tse
1c68e79091
Simplify condition check
2008-08-20 23:29:07 +00:00
Yang Tse
3e0b6a7d1f
Update test case 557
2008-08-18 18:52:13 +00:00
Yang Tse
2f71461b29
Added test case 557 to verify libcurl's internal curl_m*printf() functions
...
formatting functionality when handling signed and unsigned longs, as well as
our curl_off_t data type.
2008-08-18 09:58:08 +00:00
Yang Tse
ac18b471d2
libcurl internal base64.h header file renamed to curl_base64.h
2008-08-17 00:25:38 +00:00
Dan Fandrich
a923d8541c
Added test case 1065 to test a PUT with a single file but two URLs. This
...
was discovered to be problematic while investigating an incident reported by
Von back in May. curl in this case doesn't include a Content-Length: or
Transfer-Encoding: chunked header which is illegal. This test case is
added to DISABLED until a solution is found.
2008-08-15 19:18:46 +00:00
Dan Fandrich
527a5f0980
Added Range keyword
2008-08-14 19:18:18 +00:00
Dan Fandrich
6e878d2ca4
Added test 1063 to test an invalid large range on a file:
2008-08-14 19:18:01 +00:00
Dan Fandrich
7eab7fa353
Fixed a buffer overflow problem in Curl_proxyCONNECT that could occur
...
when a server responded with long headers and data. Luckily, the buffer
overflowed into another unused buffer, so no actual harm was done.
Added test cases 1060 and 1061 to verify.
2008-08-12 20:07:52 +00:00
Dan Fandrich
9ee7a014c9
Handle short reads
2008-08-12 18:32:55 +00:00
Daniel Stenberg
14a5596346
- Andy Tsouladze fixed runtests.pl to not attempt to execute the stunnel
...
_directory_ if that happened to appear in the path!
2008-08-12 07:21:39 +00:00
Dan Fandrich
e8e8177e9d
Added HTTP CONNECT keywords
2008-08-11 23:16:48 +00:00
Dan Fandrich
f1fe04245a
Fixed a boundary condition error in ftp_readresp() whereby a non-terminal
...
line of a multiline FTP response whose last byte landed exactly at the end
of the BUFSIZE-length buffer would be treated as the terminal response
line. The following response code read in would then actually be the
end of the previous response line, and all responses from then on would
correspond to the wrong command. Test case 1062 verifies this.
Stop closing a never-opened ftp socket.
2008-08-11 23:16:08 +00:00
Yang Tse
3a1d28379a
Die when curlbuild.h is not created or available
2008-08-11 00:15:20 +00:00
Yang Tse
68cfe929c4
Fix NetWare curlbuild.h
...
NetWare curlbuild.h settings depend on whether LIBC or CLIB is used.
The NetWare specific Makefile is capable of knowing which target is being built.
So, finally, the NetWare Makefile will take care of generating curlbuild.h
2008-08-10 18:33:41 +00:00
Yang Tse
b023f9bd2a
When running testcurl.pl display definitions from curlbuild.h
2008-08-09 23:14:40 +00:00
Yang Tse
f01d18e4b9
Reintroduce the adjustment previously done in testcurl.pl so that it copies the
...
CVS checked out curlbuild.h.dist as curlbuild.h for any non-configure target
when host system is not running buildconf.bat.
All the curlbuild.h stuff was done taking in consideration that no adjustment
would be needed in non-configure makefiles.
As it is documented, when trying to build on non-configure capable systems or on
systems which for any reason don't run the true configure script, it is required
to have the proper curlbuild.h in place before calling any makefile.
Due to the hardcore memory debugging stuff c-ares enabled debug builds also need
the file in the proper place before attempting to build c-ares.
2008-08-08 12:34:01 +00:00
Dan Fandrich
fa001f27a5
Made ftp a required feature
2008-08-08 07:51:50 +00:00
Dan Fandrich
40b2e06a7f
Added test1059 to test the FTP proxy tunnel problem fixed July 11.
2008-08-08 07:26:30 +00:00
Yang Tse
8008499028
Peek at predefined symbols done. and now removed.
...
Netware's autobuilds gcc can not been told apart from a standard built gcc.
2008-08-08 05:58:08 +00:00
Yang Tse
8d36acd29b
Take a peek at netware's gcc predefined symbols.
2008-08-08 03:09:16 +00:00
Yang Tse
f6a958dc3a
Remove last adjustment done to testcurl.pl to verify if change introduced by
...
Guenter Knauf in lib/Makefile.netware is enough to get the netware autobuilds
going again.
2008-08-07 22:40:06 +00:00
Yang Tse
a7d52c414f
Adjust testcurl.pl to copy checked out curlbuild.h.dist as curlbuild.h
...
for non-configure targets when host system doesn't run buildconf.bat.
2008-08-07 20:41:12 +00:00
Yang Tse
14240e9e10
Initial support of curlbuild.h and curlrules.h which allows
...
to have a curl_off_t data type no longer gated to off_t.
2008-08-07 00:29:08 +00:00
Daniel Stenberg
3a499099af
- Test cases 1051, 1052 and 1055 were added by Daniel Fandrich on July 30 and
...
proved how PUT and POST with a redirect could lead to a "hang" due to the
data stream not being rewound properly when it had to in order to get sent
properly (again) to the subsequent URL. This is now fixed and these test
cases are no longer disabled.
2008-08-04 22:00:22 +00:00
Daniel Stenberg
8d012181b0
- Test case 1041 (added by Daniel Fandrich April 14th) proved a bug where PUT
...
with -C - sent garbage in the Content-Range: header. I fixed this problem by
making sure libcurl always sets the size of the _entire_ upload if an app
attemps to do resumed uploads since libcurl simply cannot know the size of
what is currently at the server end. Test 1041 is no longer disabled.
2008-08-03 22:20:58 +00:00
Dan Fandrich
6838fb32af
Improved title
2008-08-03 05:13:05 +00:00
Dan Fandrich
f27299dc3b
Added tests 1057 and 1058 to test FTP and HTTPS transfers with ranges
...
relative to end of file.
2008-08-01 22:12:34 +00:00
Dan Fandrich
9251dd7b24
User names embedded in proxy URLs without a password were parsed
...
incorrectly--the host name is treated as part of the user name and the
port number becomes the password. This can be observed in test 279
(was KNOWN_ISSUE #54 ).
2008-08-01 02:09:08 +00:00
Dan Fandrich
b13b9f3331
Fixed keyword
2008-07-31 05:00:02 +00:00
Dan Fandrich
108e584983
Added keywords
2008-07-31 02:51:44 +00:00
Dan Fandrich
f3b4071209
Added test of IPv6 scope handling
2008-07-31 02:38:51 +00:00
Yang Tse
0de08d418f
s/silly/underquoted definition/
2008-07-31 01:41:20 +00:00
Dan Fandrich
bc649593e4
Added test cases 1052 through 1055 to test uploading data from files
...
during redirects. Test cases 1052 and 1055 show problems (maybe the same
root cause as 1051) and are disabled.
2008-07-30 21:04:44 +00:00
Dan Fandrich
1f26ea4a85
Added test case 1051 to test Location: following with PUT, as reported
...
by Ben Sutcliffe. The test when run manually shows a problem in curl,
but the test harness web server doesn't run the test correctly so it's
disabled for now.
2008-07-30 07:24:59 +00:00
Yang Tse
912c29fd8c
Undo using the sreadfrom() wrapper to replace recvfrom() in our code, for real ;-)
2008-07-30 06:20:43 +00:00
Yang Tse
537490e391
Undo using the sreadfrom() wrapper to replace recvfrom() in our code.
2008-07-30 05:10:42 +00:00
Yang Tse
7a588144b7
Reinstate hiding aclocal 'underquoted definition' warnings.
2008-07-30 04:42:16 +00:00
Dan Fandrich
adc032e7d8
Return an error code when extra files are found in filecheck:
2008-07-29 18:57:01 +00:00
Dan Fandrich
4ff37a4ed1
Added test case 1050 to test --ftp-port with an IPv6 address.
...
Made --interface tests less restrictive on host address.
2008-07-29 01:05:28 +00:00
Dan Fandrich
f042a7419d
Added test cases 1045 through 1049 as simple tests of --interface using the
...
localhost interface.
2008-07-28 18:39:32 +00:00
Dan Fandrich
b6b03c8ab9
Added feature in runtests.pl to select tests based on key word.
2008-07-27 02:34:27 +00:00
Dan Fandrich
e06944438a
Added test 1044 to test large file support in ftp with -I.
2008-07-26 20:09:36 +00:00
Yang Tse
b217e6eed7
No longer hide aclocal 'underquoted definition' warnings.
...
http://sources.redhat.com/automake/automake.html#Extending-aclocal documents
that starting with Automake 1.8, aclocal will warn about all underquoted calls
to AC_DEFUN due to the fact that in a single aclocal run it might include more
than once all .m4 files which it finds available, this includes .m4 files from
other software packages.
If the first argument to AC_DEFUN is underquoted and the same macro is included
more than once, successive inclusions after the first one will expand the macro
instead of assuming it is the same as the first one included.
2008-07-26 00:19:03 +00:00
Dan Fandrich
932b589780
Changed the long logfile elision code in runtests.pl to properly handle
...
lines ending in \r.
2008-07-24 02:16:48 +00:00
Dan Fandrich
27c282a6ee
Mention that the test harness can't check every possible feature.
2008-07-23 23:03:52 +00:00
Yang Tse
51e84c77e7
fix compiler warning: implicit conversion from "long" to "int"
2008-07-21 09:23:56 +00:00
Yang Tse
1b37baf656
Use the sreadfrom() wrapper to replace recvfrom() in our code.
2008-07-21 03:06:07 +00:00
Dan Fandrich
ed2dbefa73
Fixed the XML syntax of a few test files.
2008-07-17 22:39:23 +00:00
Yang Tse
1e7125ae7b
add comment for include paths
2008-07-15 05:46:49 +00:00
Dan Fandrich
aa4a7471dd
Added test1042 and test1043 to test -C - on HTTP.
2008-07-15 04:12:15 +00:00
Dan Fandrich
69a03ce23c
Added test1040 and test1041 to test -C - on HTTP. Test 1041 failed so it's
...
added to DISABLED.
2008-07-15 03:36:38 +00:00
Dan Fandrich
336992cc54
Fixed test 553 to pass the torture test.
2008-07-11 18:23:06 +00:00
Dan Fandrich
13afcbd1eb
Avoid a potential zombie process when killing an old ftpserver
2008-07-11 17:18:37 +00:00
Dan Fandrich
8d49a8f278
Added test cases 1038 and 1039 to test Adrian Kreher's report that ftp
...
uploads with -C - didn't resume properly, but the tests pass.
2008-07-11 05:08:06 +00:00
Yang Tse
d8f109176c
fallback to gettimeofday when monotonic clock is unavailable at run-time
2008-07-10 07:16:45 +00:00
Dan Fandrich
bbb1b99ce1
Added tests 1036 and 1037 to verify resumed ftp downloads with -C -
2008-07-10 06:09:03 +00:00
Dan Fandrich
60f0b4fffe
Fixed test 554 to pass the torture test.
2008-07-08 21:16:18 +00:00
Dan Fandrich
a25959184e
Added test cases 1034 & 1035 to test IDN name conversion failures.
2008-07-07 23:52:52 +00:00
Daniel Stenberg
0e5da5b8bc
- Scott Barrett provided a test case for a segfault in the FTP code and the
...
fix for it. It occured when you did a FTP transfer using
CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but
switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being
cleared properly. Scott's test case is now known as test 539 and it
verifies the fix.
2008-07-07 20:37:07 +00:00
Daniel Stenberg
82412f218f
Phil Blundell provided a fix for libcurl's treatment of unexpected 1xx
...
response codes. Previously libcurl would hang on such occurances. I added
test case 1033 to verify.
2008-07-03 08:47:53 +00:00
Daniel Stenberg
d92945bb8a
- Eduard Bloch filed the debian bug report #487567
...
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487567 ) pointing out that
libcurl used Content-Range: instead of Range when doing a range request with
--head (CURLOPT_NOBODY). This is now fixed and test case 1032 was added to
verify.
2008-06-22 20:38:16 +00:00
Dan Fandrich
a837bd08b0
Edited some test keywords for consistency
2008-06-21 17:56:48 +00:00
Dan Fandrich
70d834c512
Always use $LOGDIR when referring to the log directory.
2008-06-19 01:12:02 +00:00
Dan Fandrich
5304b13365
Added SSH failure test cases 628-632
2008-06-19 00:18:58 +00:00
Daniel Stenberg
2d0fea2650
fixed the language somewhat
2008-06-13 20:45:34 +00:00
Dan Fandrich
024c7641a9
Added IPv6 keywords for some more tests that require IPv6 networking support
2008-06-12 23:50:57 +00:00
Daniel Stenberg
5abfdc0140
- curl the tool now deals with its command line options somewhat differently!
...
All boolean options (such as -O, -I, -v etc), both short and long versions,
now always switch on/enable the option named. Using the same option multiple
times thus make no difference. To switch off one of those options, you need
to use the long version of the option and type --no-OPTION. Like to disable
verbose mode you use --no-verbose!
- Added --remote-name-all to curl, which if used changes the default for all
given URLs to be dealt with as if -O is used. So if you want to disable that
for a specific URL after --remote-name-all has been used, you muse use -o -
or --no-remote-name.
2008-06-08 20:53:49 +00:00
Daniel Stenberg
930a45e7a9
- Added CURLINFO_PRIMARY_IP as a new information retrievable with
...
curl_easy_getinfo. It returns a pointer to a string with the most recently
used IP address. Modified test case 500 to also verify this feature. The
implementing of this feature was sponsored by Lenny Rachitsky at NeuStar.
2008-06-06 17:33:35 +00:00
Daniel Stenberg
e7b5a8e6cb
curl returns 0 for these options now
2008-06-01 22:10:21 +00:00
Daniel Stenberg
27eaf0cf02
now returns 0
2008-06-01 22:04:09 +00:00
Daniel Stenberg
f7815fa93c
- Bug report #1973352 ( http://curl.haxx.se/bug/view.cgi?id=1973352 ) identified
...
how the HTTP redirect following code didn't properly follow to a new URL if
the new url was but a query string such as "Location: ?moo=foo". Test case
1031 was added to verify this fix.
2008-05-26 20:39:41 +00:00
Dan Fandrich
d31da176eb
Made sure to pass longs in to curl_easy_setopt where necessary in the
...
libtest code.
2008-05-22 21:49:52 +00:00
Daniel Stenberg
c1dfe2c529
wait for all 129 bytes
2008-05-13 21:43:37 +00:00
Daniel Stenberg
7f88e8badb
Added test case 556 that uses curl_easy_send() and curl_easy_recv()
2008-05-13 21:42:07 +00:00
Yang Tse
ed80eb5b0f
configure script will now define HAVE_CLOCK_GETTIME_MONOTONIC symbol only
...
when function clock_gettime() is available and the monotonic timer is
also available. Otherwise, in some cases, librt or libposix4 could be used
for linking even when finally not using the clock_gettime() function due
to lack of the monotonic clock.
2008-05-12 02:04:21 +00:00
Yang Tse
60dd765b3d
fix syntax error: missing semicolon
2008-05-10 23:50:55 +00:00
Yang Tse
19479ea021
Internal time differences now use monotonic time source if available.
...
This also implies the removal of the winmm.lib dependency for WIN32.
2008-05-09 16:31:51 +00:00
Daniel Stenberg
fc9e0d2249
- Ben Van Hof filed bug report #1945240 : "libcurl sometimes sends body twice
...
when using CURL_AUTH_ANY" (http://curl.haxx.se/bug/view.cgi?id=1945240 ).
The problem was that when libcurl rewound a stream meant for upload when it
would prepare for a second request, it could accidentally continue the
sending of the rewound data on the first request instead of on the second.
Ben also provided test case 1030 that verifies this fix.
2008-05-03 21:45:12 +00:00
Dan Fandrich
45edad84cb
Document that variable replacement now takes place in the test file <stdout> section.
2008-05-01 17:48:00 +00:00
Daniel Stenberg
fd31f7e7e5
use variables to support other IPs and port numbers
2008-05-01 10:52:12 +00:00
Daniel Stenberg
7b2531da24
do variable replacement in the stdout data read from the test case
2008-05-01 10:51:16 +00:00
Dan Fandrich
848a13654d
Added precheck for hard-coded test server address and port
2008-05-01 00:20:01 +00:00
Dan Fandrich
1cca8f5a30
Made file XML compatible
2008-05-01 00:18:16 +00:00
Daniel Stenberg
852989856d
- To make it easier for applications that want lots of magic stuff done on
...
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now
introduce the new CURLINFO_REDIRECT_URL option that lets applications
extract the URL libcurl would've redirected to if it had been told to. This
then enables the application to continue to that URL as it thinks is
suitable, without having to re-implement the magic of creating the new URL
from the Location: header etc. Test 1029 verifies it.
2008-04-30 21:20:08 +00:00
Dan Fandrich
ab71654078
Added test 1028 to test an HTTP redirect to a FTP URL.
2008-04-29 02:30:09 +00:00
Yang Tse
b8193b6321
tests/libtest/delay.pl no longer used. The 'delay' attribute of the
...
test harness <command> subsection now provides this functionality.
2008-04-25 11:01:26 +00:00
Yang Tse
113d0937de
Add 'timeout' and 'delay' attributes support for the test harness <command> subsection
2008-04-25 04:19:50 +00:00
Yang Tse
e0f0a2ccee
<postcheck> delay no longer needed for this test.
...
http://curl.haxx.se/mail/lib-2008-04/0392.html
2008-04-23 23:58:00 +00:00
Yang Tse
96edebf4d9
improve synchronization between test harness runtests.pl script
...
and test harness servers to minimize risk of false test failures.
http://curl.haxx.se/mail/lib-2008-04/0392.html
2008-04-23 23:55:34 +00:00
Yang Tse
ad1dd08693
fix minor memory leak triggered upon test failure
2008-04-22 13:07:27 +00:00
Yang Tse
95fd093c4a
Remove fflush() + fsync() previously introduced accelerated writing of
...
server input and response request files of the test harness sws server.
Reintroduce, for test # 1001, the <postcheck> small delay. The delay is
needed even with the accelerated writing of server input and response
request files in test harness sws server.
http://curl.haxx.se/mail/lib-2008-04/0385.html
2008-04-22 12:40:05 +00:00
Yang Tse
ed1ad28e29
Remove previously introduced small delay to verify if it can be avoided
...
with the accelerated writing of server input and response request files
in test harness sws server.
2008-04-22 00:23:18 +00:00
Dan Fandrich
768e3e796e
Ignore the result of the postcheck command in torture mode
2008-04-21 17:19:44 +00:00
Dan Fandrich
3869d4a3a7
Make the test work with nroffs that use special escaping for bold output.
2008-04-21 16:57:27 +00:00
Yang Tse
a87c468c5c
accelerate the writing of server input and response request files
...
to disk, trying to defeat file and disk write-behind algorithms
2008-04-20 19:15:08 +00:00
Dan Fandrich
7abf50a5c0
Added test cases 1026 and 1027 to do some rudimentary tests on the --manual
...
and --help options.
2008-04-18 22:31:52 +00:00
Yang Tse
d3f46eb61b
test 1001 needs a small delay between client part execution and test
...
result file verifications to allow the test server to completely write
out all files
2008-04-18 17:25:54 +00:00
Yang Tse
72c58b0d1d
test 1001 needs a small delay between client part execution and test
...
result file verifications to allow the test server to completely write
out all files
2008-04-18 17:17:14 +00:00
Yang Tse
6c89e1b311
fix compiler warning: enumerated type mixed with another type
2008-04-17 11:59:46 +00:00
Daniel Stenberg
0331071346
Added test case 555, a variation of 547 but using multi interface instead of
...
easy. This was reported not working by Penugonda Chenna Reddy in
http://curl.haxx.se/mail/lib-2008-04/0046.html but I fail to repeat that
problem.
2008-04-16 21:11:46 +00:00
Dan Fandrich
a9591ad1b7
Added test case 1025 to test a command-line cookie with Location: following
2008-04-10 18:18:55 +00:00
Dan Fandrich
c97d112b30
Added test case 1024 to test a scenario similar to the one reported
...
by Ben Combee where libcurl would send the wrong cookie to a redirected
server. libcurl was doing the right thing in this test case.
2008-04-10 04:21:08 +00:00
Yang Tse
6fd3ff4032
fix compiler warning: argument is incompatible with corresponding format string conversion
2008-04-07 15:40:49 +00:00
Yang Tse
532d4b5106
SunSSH sshd ignores UsePrivilegeSeparation option
2008-04-04 14:47:32 +00:00
Yang Tse
5788719988
SunSSH 1.2 options sync
2008-04-04 14:08:36 +00:00
Daniel Stenberg
ac0b911eda
oops, forgot to add test554
2008-04-04 11:39:32 +00:00
Dan Fandrich
10232bfe9e
Added test627 to test SFTP with CURLOPT_NOBODY
2008-04-04 02:06:35 +00:00
Daniel Stenberg
a2314225e0
- Added CURLFORM_STREAM as a supported option to curl_formadd() to allow an
...
application to provide data for a multipart with the read callback. Note
that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the
stream option is used. This feature is verified by the new test case
554. This feature was sponsored by Xponaut.
2008-03-31 10:02:23 +00:00
Dan Fandrich
7f7b643c0d
Made the test work on perl 5.00
2008-03-28 18:19:11 +00:00
Daniel Stenberg
95bd901efe
- Fixed the problem with doing a zero byte SCP transfer, verified with test
...
case 617 (which was added by Daniel Fandrich 5 Mar 2008).
2008-03-22 22:00:21 +00:00
Gunter Knauf
c0a30b04c2
added --extvercmd parameter which can be used to specify an external command to display 'curl --version', f.e. with MinW32 crosscompile --extvercmd=/usr/bin/wine can be used.
2008-03-20 16:10:54 +00:00
Dan Fandrich
e9a460411f
Fixed an infinite loop when given an invalid SFTP quote command.
2008-03-18 22:59:04 +00:00
Dan Fandrich
a57098ea9b
Added test 626 to reproduce an infinite loop when given an invalid
...
SFTP quote command reported by Vincent Le Normand, but left it disabled.
2008-03-18 17:05:29 +00:00
Dan Fandrich
942daece00
Spell the commands right
2008-03-15 01:03:23 +00:00
Dan Fandrich
040a4443a1
Added tests 622-625 to test SFTP/SCP uploads. Test 625 was an attempt to
...
reproduce the --ftp-create-dirs problem reported by Brian Ulm, but that
seems to need a call curl_easy_reset() which this test case doesn't do.
2008-03-13 22:51:39 +00:00
Daniel Stenberg
fc9ad03e66
updated according to the name resolve race condition fix just committed
2008-03-11 22:58:52 +00:00
Dan Fandrich
458925ae0b
Added tests 618-621 to test SFTP/SCP transfers of more than one file
...
(test 620 tests the just-fixed problem reported by Brian Ulm).
2008-03-10 19:40:27 +00:00
Michal Marek
e44dc92197
fixed typo
2008-03-10 14:32:19 +00:00
Dan Fandrich
b16ea66cec
Added tests 616 and 617 to see how SFTP and SCP cope with zero-length
...
files, as questioned by Mike Protts. SFTP does for me but SCP doesn't
so test 617 is disabled for now.
2008-03-06 01:15:28 +00:00
Dan Fandrich
80cec5a62a
Fixed the test harness so it will write out zero-length data files.
2008-03-06 01:11:43 +00:00
Yang Tse
6c2c281a7e
fix log message used when unable to connect to destination port
2008-03-05 18:27:31 +00:00
Yang Tse
18cbb4d7d6
signal handling to properly cleanup on SIGINT and SIGTERM
2008-02-28 10:15:21 +00:00
Yang Tse
22e84d92b7
when terminating do it falling through cleanup code
2008-02-28 10:13:07 +00:00
Yang Tse
3d74649908
avoid inclusion of setup.h in util.h
2008-02-28 09:38:32 +00:00
Yang Tse
ed63d9d4de
header inclusion cleanup
2008-02-28 00:55:06 +00:00
Yang Tse
8adc7038fe
make comment more precise
2008-02-27 14:54:18 +00:00
Daniel Stenberg
b12fef3f31
Michal Marek's cleanup of how curl_easy_setopt() is used in examples and
...
test code. Thanks to his curl_easy_setopt() typechecker work...
2008-02-27 09:06:15 +00:00
Gunter Knauf
97a41f3646
trial to fix the HP-UX breakage...
2008-02-26 23:06:15 +00:00
Yang Tse
058e764af8
all reads from stdin and writes to stdout will be retried until the
...
whole operation completes or an unrecoverable condition is detected
2008-02-26 18:13:59 +00:00
Yang Tse
0d09f342c4
refactor some code out to write_pidfile() in util.c
2008-02-26 15:06:44 +00:00
Yang Tse
1d95109ffa
Revert sockfilt.c back to revision 1.42
...
Changes introduced in revision 1.43 were useless
2008-02-22 09:31:18 +00:00
Yang Tse
064eebeaf1
Avoid timeout restart when signal caught while awaiting socket and stdin events
2008-02-20 17:17:18 +00:00
Daniel Stenberg
e6170eb20d
- Fixed test case 405 to not fail when libcurl is built with GnuTLS
2008-02-20 12:18:08 +00:00
Daniel Stenberg
2c80bcbc81
made the non-matching error code output nicer since we know it is a number
...
and the string contains a newline...
2008-02-20 12:14:31 +00:00
Daniel Stenberg
55700cb01f
- We no longer support setting the CURLOPT_URL option from inside a callback
...
such as the CURLOPT_SSL_CTX_FUNCTION one treat that as if it was a Location:
following. The patch that introduced this feature was done for 7.11.0, but
this code and functionality has been broken since about 7.15.4 (March 2006)
with the introduction of non-blocking OpenSSL "connects".
It was a hack to begin with and since it doesn't work and hasn't worked
correctly for a long time and nobody has even noticed, I consider it a very
suitable subject for plain removal. And so it was done.
2008-02-20 08:28:02 +00:00
Dan Fandrich
0cae201044
Added test309 to test HTTP redirect to HTTPS URL
2008-02-19 21:57:41 +00:00
Yang Tse
9df37b93df
juggle() actually returns bool.
...
Remove redundant and unreachable log message.
2008-02-19 18:51:08 +00:00
Yang Tse
c9eb41c056
Reduce to 20 seconds the time allowed to set SO_REUSEADDR option on sockfilt listener socket.
...
Log some more error descriptions.
2008-02-18 20:13:30 +00:00
Yang Tse
23547fa2a0
sockfilt will quit when orphaned
2008-02-17 04:36:08 +00:00
Daniel Stenberg
11fae450fa
make this test disabled properly when built with yassl
2008-02-13 21:36:24 +00:00
Yang Tse
cf9259dd92
verifyserver() actually returns the pid of the unsecure http and ftp servers
...
when verifying the https and ftps servers
2008-02-13 06:06:57 +00:00
Yang Tse
6634e3c3a3
On heavily loaded systems any test server start up can take longer than the
...
timeout passed to startnew, when this happens startnew completes without being
able to read the pidfile and consequently returns a zero pid2.
To fix the above posibility the server pid is recovered from the verification
stage which will actually return the server pid when verification is valid.
2008-02-12 13:47:56 +00:00
Yang Tse
533ae704a1
fix grammatical issues
2008-02-12 01:11:55 +00:00
Yang Tse
dc9fe9c361
shell startup scripts and possible influence in scp/sftp/socks tests
2008-02-11 20:21:06 +00:00
Dan Fandrich
75c369dcca
Disable test due to keyword before disabling due to bad server.
2008-02-11 20:10:36 +00:00
Yang Tse
8f9e0357dd
Additional SunSSH 1.1 ssh server options
2008-02-11 14:28:48 +00:00
Yang Tse
6942d313ff
Verify only once test harness sftp server connectivity and functionality.
...
Make sure that the sftp client tool uses the ssh client binary that we have
used to generate the configuration files, otherwise sftp might be using one
located in the preferred path compiled into sftp.
2008-02-10 02:52:17 +00:00
Dan Fandrich
15e56c3284
Fixed some XML parsing problems.
2008-02-09 02:37:31 +00:00
Dan Fandrich
fc1443dcfc
Added key words to all SSL-using tests so they can be skipped if necessary.
...
Removed a few unnecessary requires SSL statements.
2008-02-09 02:08:34 +00:00
Dan Fandrich
59e3651af3
Fixed test to use HTTPS as documented.
2008-02-09 02:01:36 +00:00
Dan Fandrich
f01d324c83
Missed checking in these test data files.
2008-02-08 18:42:12 +00:00
Yang Tse
405e192b8c
Get rid of sftp subsystem additional parameters, they aren't widely supported
2008-02-08 17:32:58 +00:00
Yang Tse
1a340de0e5
To verify that the sftp server is actually running, responsive and that
...
all curl's tests generated configuration and key files are fine, a real
connection is established to the test harness sftp server authenticating
and running a simple sftp remote pwd command.
The verification is done using OpenSSH's or SunSSH's sftp client tool with
a configuration file with the same options as the test harness socks server
with the exception that dynamic forwarding is not used for sftp.
2008-02-08 13:54:02 +00:00
Dan Fandrich
ce1649564c
Added tests 1022 and 1023 to validate output of curl-config --version and
...
--vernum
2008-02-08 01:21:03 +00:00
Yang Tse
bad6410d08
Don't try to compare more than strlen chars
2008-02-06 17:35:17 +00:00
Yang Tse
fecb67b246
Use a long int data type to handle getpid() result
2008-02-06 16:54:01 +00:00
Yang Tse
2c0956200f
Fix buffer size specification.
...
Improve handling of boundary conditions for huge requests.
2008-02-05 18:37:53 +00:00
Yang Tse
acd9d72466
Minor variable type cleanups.
...
Disable "swsbounce" mode when the received request
isn't for the same test and part number.
2008-02-05 14:43:16 +00:00
Yang Tse
cd63a461d7
proper initialization of httprequest, no longer zeroing out twice
...
the whole 150000+ bytes struct, and also removing an equally big
additional buffer for pipelining treatment.
2008-02-05 02:21:38 +00:00
Yang Tse
03bbf4de48
When possible, use additional config options for test harness ssh server,
...
which are deprecated in recent OpenSSH versions but are current for SunSSH.
2008-01-31 16:37:16 +00:00
Daniel Stenberg
a62e155ca4
- Niklas Angebrand made the cookie support in libcurl properly deal with the
...
"HttpOnly" feature introduced by Microsoft and apparently also supported by
Firefox: http://msdn2.microsoft.com/en-us/library/ms533046.aspx . HttpOnly
is now supported when received from servers in HTTP headers, when written to
cookie jars and when read from existing cookie jars.
2008-01-31 12:21:57 +00:00
Daniel Stenberg
7b9435890d
add verbose output to test 509 for easier debugging
2008-01-29 23:10:25 +00:00
Daniel Stenberg
ceb5a8ca7b
- Michal Marek fixed minor mistake in test case 553 that prevented it from
...
working on other IP-addresses or port numbers.
2008-01-29 12:31:11 +00:00
Yang Tse
8fca5c2e69
Dont rely on PAMAuthenticationViaKbdInt default being 'no'
2008-01-27 02:35:20 +00:00
Daniel Stenberg
5f2055729e
added test 1021 to verify my fix for bug report #1879375
2008-01-26 00:13:38 +00:00
Yang Tse
69e540dfa6
improve request initialization for test harness HTTP server
2008-01-25 05:08:53 +00:00
Yang Tse
2198869eb1
Dmitry Kurochkin's test harness HTTP server pipelining fix fot test 530
2008-01-25 05:07:04 +00:00
Yang Tse
bdb2beb8e4
check availability of poll.h header at configuration time, and include
...
it when sys/poll.h is unavailable
2008-01-22 14:52:54 +00:00
Yang Tse
3caeb0a91f
undo using internal *printf() clones for test #530
2008-01-21 05:35:08 +00:00
Yang Tse
a4eddf0d0d
use internal *printf() clones since snprintf() not available on all platforms
2008-01-20 22:53:56 +00:00
Yang Tse
e9490fdbd9
Also disable GSSAPIAuthentication for the test harness ssh client
2008-01-20 04:05:25 +00:00
Daniel Stenberg
daadcfd1de
Dmitry Kurochkin fixed test case 530 (pipelining)
2008-01-19 10:14:45 +00:00
Yang Tse
01d95b56a0
fix failure to properly detect SSH and SOCKS servers start up on loaded systems
2008-01-18 09:18:59 +00:00
Yang Tse
0530b0a5ca
Don't abort tests 518 and 537 when unable to raise the open-file soft limit
2008-01-17 18:57:50 +00:00
Dan Fandrich
bcfc7d90d1
Put the comments in an XML-valid location.
2008-01-17 04:10:28 +00:00
Daniel Stenberg
c522f349fe
Added test 553. This test case and code is based on the bug recipe Joe Malicki
...
provided for bug report #1871269 , fixed on Jan 14 2008 before the 7.18.0
release.
2008-01-16 22:54:54 +00:00
Daniel Stenberg
6893fcaa9b
remove trailing comma too, even though I don't think it does any harm
2008-01-16 22:09:51 +00:00
Daniel Stenberg
301ae1ae1b
Nathan Coulter's patch that makes runtests.pl respect the PATH when figuring
...
out what valgrind to run.
2008-01-16 22:08:37 +00:00
Daniel Stenberg
b3de497d83
Dmitry Kurochkin worked a lot on improving the HTTP Pipelining support that
...
previously had a number of flaws, perhaps most notably when an application
fired up N transfers at once as then they wouldn't pipeline at all that
nicely as anyone would think... Test case 530 was also updated to take the
improved functionality into account.
2008-01-16 12:24:00 +00:00
Yang Tse
69f685056d
startnew() shouldn't return a positive pid as reported in the pidfile
...
by the spawned server itself unless it is actually alive
2008-01-14 19:28:54 +00:00
Yang Tse
502da27d65
add client features part
2008-01-13 03:27:14 +00:00
Yang Tse
5004529685
Remove hardcoded verbosity
2008-01-12 04:32:03 +00:00
Yang Tse
2b63eb8511
Ooops
2008-01-12 00:12:16 +00:00
Yang Tse
f09fe4b49f
Ooops
2008-01-11 21:59:05 +00:00
Yang Tse
35be09cf58
When verifying that test harness's SSH and SOCKS servers have been
...
started check also that the process is actually alive, since they
could have died once the pidfile was written out
2008-01-11 20:17:33 +00:00
Daniel Stenberg
08adf67969
Daniel Egger made CURLOPT_RANGE work on file:// URLs the very same way it
...
already worked for FTP:// URLs
2008-01-11 14:20:41 +00:00
Yang Tse
14ff7e75e0
Temporary change to help debugging SSH server verification failures
2008-01-10 16:19:14 +00:00
Yang Tse
c249a8aa1b
Fix file Id
2008-01-09 01:11:59 +00:00
Yang Tse
fc794ae012
Add /usr/freeware/sbin and /usr/freeware/libexec to the ssh binaries
...
locations search list.
2008-01-09 00:58:48 +00:00
Yang Tse
32cc75d6cb
Partially cleanup debugging messages in test harness, introduced for
...
new minimum SSH version support for SCP, SFTP and SOCKS tests.
Some verbosity which still remains, will go out before next release.
2008-01-08 20:12:43 +00:00
Yang Tse
1c0a19ad53
Remove increased loglevel intended to debug autobuild's publickey
...
authentication failures when using OpenSSH 2.9.9 or SunSSH.
Verified fact: Even when only using publickey authentication,
OpenSSH and SunSSH first validate the user, this implies that
if the user validation fails, 'invalid user', the publickey
authentication will not be allowed to complete.
2008-01-08 19:18:25 +00:00
Yang Tse
34d02d1969
Increase loglevel to debug autobuild's publickey authentication
...
failures when using OpenSSH 2.9.9 or SunSSH
2008-01-08 00:40:02 +00:00
Yang Tse
2408b236ca
Display ssh server log and configuration upon socks server failure
2008-01-08 00:39:31 +00:00
Dan Fandrich
4acd437952
Fixed test description
2008-01-07 19:54:40 +00:00
Yang Tse
9c6533d287
Increase MaxAuthTries from 0 to 10. Using a value of 0 is too restrictive
2008-01-06 02:02:55 +00:00
Daniel Stenberg
3df484088f
added keyword
2008-01-05 12:15:41 +00:00
Dan Fandrich
fcb2595ed6
"yes" must be in quotes to be XML compatible
2008-01-04 23:57:39 +00:00
Daniel Stenberg
fe0d7aee49
Daniel Egger provided 'nonewline=yes' support for the <stdout> section
2008-01-04 23:31:04 +00:00
Yang Tse
a4945fe687
Missing newline at end of message
2008-01-04 19:56:56 +00:00
Yang Tse
88d89b2177
Fix 'format string' compiler warning
2008-01-04 15:39:06 +00:00
Yang Tse
61a2d5ea75
'ControlPath' ssh client configuration file option requires OpenSSH 4.2 or
...
later to accept 'none' as an indication to disable connection multiplexing
2008-01-04 14:12:10 +00:00
Yang Tse
c479c64333
SunSSH 1.1 ssh client does not support config file options:
...
ConnectTimeout
ForwardX11Trusted
HashKnownHosts
RekeyLimit
ServerAliveCountMax
ServerAliveInterval
2008-01-04 13:24:17 +00:00