I accidentally did a signed comparison of the size_t values passed in
for three of the _chk functions. Changing them to unsigned compares.
Add three new tests to verify this failure is fixed.
Bug: 10691831
Change-Id: Ia831071f7dffd5972a748d888dd506c7cc7ddba3
The backtrace when a fortify check failed was not correct. This change
adds all of the necessary directives to get a correct backtrace.
Fix the strcmp directives and change all labels to local labels.
Testing:
- Verify that the runtime can decode the stack for __memcpy_chk, __memset_chk,
__strcpy_chk, __strcat_chk fortify failures.
- Verify that gdb can decode the stack properly when hitting a fortify check.
- Verify that the runtime can decode the stack for a seg fault for all of the
_chk functions and for memcpy/memset.
- Verify that gdb can decode the stack for a seg fault for all of the _chk
functions and for memcpy/memset.
- Verify that the runtime can decode the stack for a seg fault for strcmp.
- Verify that gdb can decode the stack for a seg fault in strcmp.
Bug: 10342460
Bug: 10345269
Change-Id: I1dedadfee207dce4a285e17a21e8952bbc63786a
clock_gettime was returning EINVAL for the values
produced by pthread_getcpuclockid.
Bug: 10346183
(cherry picked from commit 9b06cc3c1b2c4e2b08582f3fc9393a05aa589766)
Change-Id: Ib81a7024c218a4502f256c3002b9030e2aaa278d
We used to just try any iface we'd been told about as a
fallback, but that will end up mistakenly using a secondary
network's dns when we really don't have a default connection.
It also messed up our detection of whether we were doing the
lookup on the default or not (we'd get back our secondary net
iface as the default, do the compare and think we were on default).
Remove the lies and let dns fail if we don't have an iface for it.
bug:10132565
Conflicts:
libc/netbsd/resolv/res_cache.c
Change-Id: I357a9c34dad83215f44c5e0dd41ce2a7d6fe8f3f
I've mailed the tz list about this, and will switch to whatever upstream
fix comes along as soon as it's available.
Bug: 10310929
(cherry picked from commit 7843d44a594270bcb56e98b130603c054f8a9d38)
Change-Id: I205e2440703444c50cecd91d3458d33613ddbc59
The libcorkscrew stack unwinder does not understand cfi directives,
so add .save directives so that it can function properly.
Also add the directives in to strcmp.S and fix a missing set of
directives in cortex-a9/memcpy_base.S.
Bug: 10345269
Change-Id: I043f493e0bb6c45bd3f4906fbe1d9f628815b015
This change pulls the memcpy code out into a new file so that the
__strcpy_chk and __strcat_chk can use it with an include.
The new versions of the two chk functions uses assembly versions
of strlen and memcpy to implement this check. This allows near
parity with the assembly versions of strcpy/strcat. It also means that
as memcpy implementations get faster, so do the chk functions.
Other included changes:
- Change all of the assembly labels to local labels. The other labels
confuse gdb and mess up backtracing.
- Add .cfi_startproc and .cfi_endproc directives so that gdb is not
confused when falling through from one function to another.
- Change all functions to use cfi directives since they are more powerful.
- Move the memcpy_chk fail code outside of the memcpy function definition
so that backtraces work properly.
- Preserve lr before the calls to __fortify_chk_fail so that the backtrace
actually works.
Testing:
- Ran the bionic unit tests. Verified all error messages in logs are set
correctly.
- Ran libc_test, replacing strcpy with __strcpy_chk and replacing
strcat with __strcat_chk.
- Ran the debugger on nexus10, nexus4, and old nexus7. Verified that the
backtrace is correct for all fortify check failures. Also verify that
when falling through from __memcpy_chk to memcpy that the backtrace is
still correct. Also verified the same for __memset_chk and bzero.
Verified the two different paths in the cortex-a9 memset routine that
save variables to the stack still show the backtrace properly.
Bug: 9293744
Change-Id: Id5aec8c3cb14101d91bd125eaf3770c9c8aa3f57
(cherry picked from commit 2be91915dcecc956d14ff281db0c7d216ca98af2)
This caused trouble for stlport.
(cherry picked from commit 5e9b20f7212c23110693a4bd1f122ccac3fece80)
Change-Id: I85d09c12c6de1e8502f83e0ef0f17747fdfe08a5
Create one version of strcat/strcpy/strlen for cortex-a15/krait and another
version for cortex-a9.
Tested with the libc_test strcat/strcpy/strlen tests.
Including new tests that verify that the src for strcat/strcpy do not
overread across page boundaries.
NOTE: The handling of unaligned strcpy (same code in strcat) could probably
be optimized further such that the src is read 64 bits at a time instead of
the partial reads occurring now.
strlen improves slightly since it was recently optimized.
Performance improvements for strcpy and strcat (using an empty dest string):
cortex-a9
- Small copies vary from about 5% to 20% as the size gets above 10 bytes.
- Copies >= 1024, about a 60% improvement.
- Unaligned copies, from about 40% improvement.
cortex-a15
- Most small copies exhibit a 100% improvement, a few copies only
improve by 20%.
- Copies >= 1024, about 150% improvement.
- Unaligned copies, about 100% improvement.
krait
- Most small copies vary widely, but on average 20% improvement, then
the performance gets better, hitting about a 100% improvement when
copies 64 bytes of data.
- Copies >= 1024, about 100% improvement.
- When coping MBs of data, about 50% improvement.
- Unaligned copies, about 90% improvement.
As strcat destination strings get larger in size:
cortex-a9
- about 40% improvement for small dst strings (>= 32).
- about 250% improvement for dst strings >= 1024.
cortex-a15
- about 200% improvement for small dst strings (>=32).
- about 250% improvement for dst strings >= 1024.
krait
- about 25% improvement for small dst strings (>=32).
- about 100% improvement for dst strings >=1024.
Merge from internal master.
(cherry-picked from d119b7b6f48fe507088cfb98bcafa99b320fd884)
Change-Id: I296463b251ef9fab004ee4dded2793feca5b547a
Use the new __bionic_name_mem function to name malloc'd memory as
"libc_malloc" on kernels that support it.
Change-Id: I7235eae6918fa107010039b9ab8b7cb362212272
Only works on some kernels, and only on page-aligned regions of
anonymous memory. It will show up in /proc/pid/maps as
[anon:<name>] and in /proc/pid/smaps as Name: <name>
Change-Id: If31667cf45ff41cc2a79a140ff68707526def80e
This change creates assembler versions of __memcpy_chk/__memset_chk
that is implemented in the memcpy/memset assembler code. This change
avoids an extra call to memcpy/memset, instead allowing a simple fall
through to occur from the chk code into the body of the real
implementation.
Testing:
- Ran the libc_test on __memcpy_chk/__memset_chk on all nexus devices.
- Wrote a small test executable that has three calls to __memcpy_chk and
three calls to __memset_chk. First call dest_len is length + 1. Second
call dest_len is length. Third call dest_len is length - 1.
Verified that the first two calls pass, and the third fails. Examined
the logcat output on all nexus devices to verify that the fortify
error message was sent properly.
- I benchmarked the new __memcpy_chk and __memset_chk on all systems. For
__memcpy_chk and large copies, the savings is relatively small (about 1%).
For small copies, the savings is large on cortex-a15/krait devices
(between 5% to 30%).
For cortex-a9 and small copies, the speed up is present, but relatively
small (about 3% to 5%).
For __memset_chk and large copies, the savings is also small (about 1%).
However, all processors show larger speed-ups on small copies (about 30% to
100%).
Bug: 9293744
Change-Id: I8926d59fe2673e36e8a27629e02a7b7059ebbc98
