Tested using a static version of the strlen libc_test program
on a nexus7 that uses the generic code.
Merge from internal master.
(cherry-picked from d8d10a8994)
Change-Id: I88f7dc01dc5b5c3ac2d5580d92153bc1bc36c564
This optimized version is primarily targeted at cortex-a15.
Tested on all nexus devices using the system/extras/libc_test strlen test.
Tested alignments from 1 to 32 that are powers of 2.
Tested that strlen does not cross page boundaries at all alignments.
Speed improvements listed below:
cortex-a15
- Sizes >= 32 bytes, ~75% improvement.
- Sizes >= 1024 bytes, ~250% improvement.
cortex-a9
- Sizes >= 32 bytes, ~75% improvement.
- Sizes >= 1024 bytes, ~85% improvement.
krait
- Sizes >= 32 bytes, ~95% improvement.
- Sizes >= 1024 bytes, ~160% improvement.
Merge from internal master.
(cherry-picked from 2fc0717977)
Change-Id: I1ceceb4e745fd68e9d946f96d1d42e0cdaff6ccf
We notify debuggerd of problems by installing signal handlers. That's
fine except for when the signal is caused by us running off the end of
a thread's stack and into the guard page.
Bug: 8557703
Change-Id: I1ef65b4bb3bbca7e9a9743056177094921e60ed3
We cleaned up the auto-generated ones a while back to not touch
the stack unnecessarily if they have <= 4 arguments. This patch
cleans up some hand-crafted ones.
Also improve comments in clone.S.
Change-Id: I8850bf98f2b26829385315304472a760e6880ed8
pthread_getattr_np was reporting the values supplied to us, not the values we
actually used, which is kinda the whole point of pthread_getattr_np.
pthread_attr_setguardsize and pthread_attr_setstacksize were reporting EINVAL
for any size that wasn't a multiple of the system page size. This is
unnecessary. We can just round like POSIX suggests and glibc already does.
Also improve the error reporting for pthread_create failures.
Change-Id: I7ebc518628a8a1161ec72e111def911d500bba71
Tested using a static version of the strlen libc_test program
on a nexus7 that uses the generic code.
Change-Id: If04d15dcb6c0b18f27f2fefadca5510ed49016c5
Well, kinda... localtime.c still contains a bunch of Android-specific
hacks, as does strftime.c. But the other files are now exactly the same
as upstream.
This catches up with several years of bug fixes, and fixes most of the
compiler warnings that were in this code. (Just two remain.)
Bug: 1744909
Change-Id: I2ddfecb6fd408c847397c17afb0fff859e27feef
Adds an extra mark parameter to android_getaddrinfoforiface,
android_gethostbyaddrforiface and android_gethostbynameforiface that if set
will cause all packets sent by DNS requests to have that mark
Change-Id: I6f72390e4ce5bfc3cc73183f9b2fb3705a11685f
glibc doesn't have these, and they prevent ping from building out of
the box because it assumes it can define them.
Bug: 9671560
Change-Id: I815f2a9c4fd96a0ea2952eb5a71ddf51e0763660
From the release notes:
Changes affecting future time stamps:
Morocco's midsummer transitions this year are July 7 and August 10,
not July 9 and August 8. (Thanks to Andrew Paprocki.)
Israel now falls back on the last Sunday of October.
(Thanks to Ephraim Silverberg.)
Changes affecting past time stamps:
Specify Jerusalem's location more precisely; this changes the pre-1880
times by 2 s.
Changing affecting metadata only:
Fix typos in the entries for country codes BQ and SX.
Change-Id: I87f992e4c406d4f254dc274f206536e9484024a2
Linux and *BSD kernels use opposite values to indicate pass/block
in ICMPv6 filters, and assign a different value to the
ICMP6_FILTER sockopt.
Bug: 9671560
Bug: 9469682
Change-Id: Ic0f1fcd48891add992acf97632f60aebd172c1d7
On NetBSD and glibc, including sys/ioctl.h provides some
terminal ioctl data structures such as struct winsize. For
compatibility, provide these via sys/ioctl.h in bionic as well.
bionic does not have its own definitions for these structures, so
get them from the Linux kernel definitions.
Change-Id: I01345c23c0bebd60b0a80fc33668e7c0ad7356c3
This picks up the source kernel header change
I984154487c38f6fa827bd78234f7fc2e4e1c383f .
Bug: 9469682
Change-Id: I3b57517cc6442ba4d0b8003d7398617e8226233f
This memcpy code uses NEON/VFP to achieve very good performance
on ARMv7-A processors. It is specifically tuned for A15 but should
provide good performance on A9 also. It is equivalent to the code
in cortex-strings rev 116.
This patch is a follow up the existing gerrit change:
I7f6f77995f3ca903ad9c66d14261441667a2a935
This version includes a tweak for performance on misaligned
buffers and splits the header comment into license and
documentation sections.
Change-Id: Ibd2e23c8d8e01357ba0247be1d05192de3ceba69
Signed-off-by: Will Newton <will.newton@linaro.org>
This is needed to compile open-source code that wants to
expand/compress domain names itself, such as ping6.
Bug: 9469682
Change-Id: I339c6538936d05c031bc6fb0a8793aaf1429dea4
Our intptr_t and uintptr_t aren't "long". Add a compilation test so we remember
to fix this to cope with 32- and 64-bit later.
Bug: http://code.google.com/p/android/issues/detail?id=57218
Change-Id: I2f816d339edb4f7d57e4418b818fb4c602093f38
Fix improper check of return value from __mmap2. On a failed
mmap(), it returns MAP_FAILED, not 0. This ended up clobbering errno
when madvise subsequently failed.
Change-Id: I364fb2f158fe258c55a73e552195384b2c11c193
This memcpy code uses NEON/VFP to achieve very good performance
on ARMv7-A processors. It is specifically tuned for A15 but should
provide good performance on A9 also. It is equivalent to the code
in cortex-strings rev 116.
This patch is a follow up the existing gerrit change:
I7f6f77995f3ca903ad9c66d14261441667a2a935
But this version includes a tweak for performance on misaligned
buffers.
Change-Id: I285abac0068f8ae29a1cbf7862ea8590aadaf0a7
Signed-off-by: Will Newton <will.newton@linaro.org>
This was gated off of "#ifndef ADNROID_CHANGES" (note mispelling)
and is unconditionally defined in libc/include/resolv.h
(which this file includes). No need for duplicate definitions.
Change-Id: I00719bcf39eaa26eb96ab4274f171f3d2b5bae61
Enable FORTIFY_SOURCE protections under clang for the following
functions:
* vsprintf
* vsnprintf
and add unittests.
Change-Id: I90f8a27f7b202c78b5dd8ebf53050bf9e33496f7
* commit 'fbec57d46c42460b2381484d1610ff21922d162e':
bionic: add compatibility mode for properties
bionic: use the size of the file to determine property area size
Allow a new bionic to work with an old init property area by supporting
the old format.
(cherry picked from commit ad76c85b9c)
Change-Id: Ib496e818a62a5834d40c71eb4745783d998be893
On the reader size, don't assume that the property size is PA_SIZE,
read it from the size of the file. Allows init to use a different
property size without recompiling statically linked executables.
(cherry picked from commit 285b42a04c)
Change-Id: I074204e9e6591b35faf7c1c58fb11ec162aff7bf
After download new version from upstream (OpenBSD 1.17) did the
following:
* changed all u_int* types to uint*
* add #include <sys/types.h>
All these changes are Android-specific and had been done before for
previous version (1.14).
Bug: http://code.google.com/p/android/issues/detail?id=54465
Change-Id: Ieb44e7fce4e794d997bb00ee0dd417fb61521720
Signed-off-by: Pavel Chupin <pavel.v.chupin@intel.com>
On the reader size, don't assume that the property size is PA_SIZE,
read it from the size of the file. Allows init to use a different
property size without recompiling statically linked executables.
Change-Id: I87fb0bf40c4724e3759a583fd9ea1f49492bc958
Names are immutable, so the fixed-sized arrays can be replaced with
variable-length ones to save memory (especially on internal tree nodes).
Change-Id: Iddf7856fba579b97f355e9ad4b3663a78767b96d
Signed-off-by: Greg Hackmann <ghackmann@google.com>
If a root process other than init calls __system_property_add, which
it should never do, it will break the design assumption that there is
only one mutator.
Pass O_EXCL to open() in map_prop_region_rw to ensure that only one
process ever has the property pages open for write.
Change-Id: I8233bfe0beaa40a5003ad53b98c661536b15f6b7
d329697 is too complicated. Change the multiple property pages back to
a single 128K property area that's mapped in entirely at initialization
(the memory will not get allocated until the pages are touched).
d329697 has other changes useful for testing (moving property area
initialization inside bionic and adding __system_property_set_filename)
so undo the change manually rather than with git revert.
Change-Id: Icd137669a4f8bc248e9dd2c1e8cc54e9193c9a6d
Signed-off-by: Greg Hackmann <ghackmann@google.com>
See the comments for an explanation of how properties are stored.
The trie structure is designed to scale better than the previous
array-based implementation. Searching an array with n properties
required average O(n) string compares of the entire key; searching the
trie requires average O(log n) string compares of each token (substrings
between '.' characters).
Change-Id: Ic28b3c5246004a3c502eb02d6e1c9b512884d872
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Kernel provides virtual DSO for stack unwinding/exception handlind info for
signal usage case. Stack unwinding routines use 'dl_iterate_phdr' function
for additional DWARF info gathering from DSOs. Patch enables virtual DSO
enumeration via dl_iterate_phdr function.
Signed-off-by: Sergey Melnikov <sergey.melnikov@intel.com>
Change-Id: Ic2882b28f40b456a088bc1e63c50cbfda7e4a102
Fixes apps compiled statically against new libc but running with old
init
Bug: 9558625
Change-Id: I79e6f02575d278d4c7d8e8546d772ed0529bcaab
Signed-off-by: Greg Hackmann <ghackmann@google.com>
* commit '1642edb5208fe02ef64d5734fffaf7c4a724fd2f':
bionic: store property names as variable-length strings
bionic: prevent root processes from calling __system_property_add
bionic: revert to a single (larger) property area
bionic: reimplement property area as hybrid trie/binary tree
bionic: add missing memory barriers to system properties
bionic: make property area expandable
Names are immutable, so the fixed-sized arrays can be replaced with
variable-length ones to save memory (especially on internal tree nodes).
Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit 492ce95d9f)
Change-Id: Ib074192d1b71150233d78c58e9ffcf7ecf688b6b
If a root process other than init calls __system_property_add, which
it should never do, it will break the design assumption that there is
only one mutator.
Pass O_EXCL to open() in map_prop_region_rw to ensure that only one
process ever has the property pages open for write.
(cherry picked from commit fb9b7b436f)
Change-Id: I6df3afedbfb5d07891b095aa24b78278381a5aaf
d329697 is too complicated. Change the multiple property pages back to
a single 128K property area that's mapped in entirely at initialization
(the memory will not get allocated until the pages are touched).
d329697 has other changes useful for testing (moving property area
initialization inside bionic and adding __system_property_set_filename)
so undo the change manually rather than with git revert.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit 5f05348c18)
Change-Id: I690704552afc07a4dd410277893ca9c40bc13e5f
See the comments for an explanation of how properties are stored.
The trie structure is designed to scale better than the previous
array-based implementation. Searching an array with n properties
required average O(n) string compares of the entire key; searching the
trie requires average O(log n) string compares of each token (substrings
between '.' characters).
Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit 6ac8e6a46d)
Change-Id: Icbe31908572f33b4d9b85d5b62ac837cbd0f85e0
1) Reading the value must finish before checking whether it's intact
2) Setting the serial's dirty bit must visible before modifying the
value
3) The modified value must be visible before clearing the serial's dirty
bit
4) New properties and their TOC entries must be visible before updating
the property count
Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit 5bfa3ee8b3)
Change-Id: Id3fa45261fc2df2ae493ab5194bc2b6bff04e966
The property area is initially one 4K region, automatically expanding as
needed up to 64 regions.
To avoid duplicating code, __system_property_area_init() now allocates
and initializes the first region (previously it was allocated in init's
init_property_area() and initialized in bionic). For testing purposes,
__system_property_set_filename() may be used to override the file used
to map in regions.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit d32969701b)
Change-Id: I038d451fe8849b0c4863663eec6f57f6521bf4a7
Names are immutable, so the fixed-sized arrays can be replaced with
variable-length ones to save memory (especially on internal tree nodes).
Change-Id: Iee77874b4b55b0f9c5e531d1334be7f7f40086d2
Signed-off-by: Greg Hackmann <ghackmann@google.com>
If a root process other than init calls __system_property_add, which
it should never do, it will break the design assumption that there is
only one mutator.
Pass O_EXCL to open() in map_prop_region_rw to ensure that only one
process ever has the property pages open for write.
Change-Id: I6b7c118e5e2fd2b92a2b168b8454fe9707325462
d329697 is too complicated. Change the multiple property pages back to
a single 128K property area that's mapped in entirely at initialization
(the memory will not get allocated until the pages are touched).
d329697 has other changes useful for testing (moving property area
initialization inside bionic and adding __system_property_set_filename)
so undo the change manually rather than with git revert.
Change-Id: I0ecb27843404f93af5489f15bfe657d65175e4f0
Signed-off-by: Greg Hackmann <ghackmann@google.com>
See the comments for an explanation of how properties are stored.
The trie structure is designed to scale better than the previous
array-based implementation. Searching an array with n properties
required average O(n) string compares of the entire key; searching the
trie requires average O(log n) string compares of each token (substrings
between '.' characters).
Change-Id: I491305bc7aca59609abcd871a5f33d97f89ce714
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Avoid keeping unnecessary file descriptors around when they're not
needed. Libc doesn't log so much that opening / closing overhead
matters.
Change-Id: I590ec5c27562db9bac025f781c48ec9a7724ce77
1) Reading the value must finish before checking whether it's intact
2) Setting the serial's dirty bit must visible before modifying the
value
3) The modified value must be visible before clearing the serial's dirty
bit
4) New properties and their TOC entries must be visible before updating
the property count
Change-Id: I26c680ec025fdb72362d5f618ec0d2b93d381233
Signed-off-by: Greg Hackmann <ghackmann@google.com>
The property area is initially one 4K region, automatically expanding as
needed up to 64 regions.
To avoid duplicating code, __system_property_area_init() now allocates
and initializes the first region (previously it was allocated in init's
init_property_area() and initialized in bionic). For testing purposes,
__system_property_set_filename() may be used to override the file used
to map in regions.
Change-Id: Ibe00ef52464bfa590953c4699a6d98383b0142b1
Signed-off-by: Greg Hackmann <ghackmann@google.com>
find_nth() will be inefficient on a trie. Since find_nth() is only used
internally and only for enumerating properties, we can add a foreach()
function to do this directly.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit 577418403d)
Change-Id: Iaca97d1182ce2c28863ba85241cbb5cf6185eb2f
find_nth() will be inefficient on a trie. Since find_nth() is only used
internally and only for enumerating properties, we can add a foreach()
function to do this directly.
Change-Id: I66bde9926c193073d74b244cce9fffd52108fff8
Signed-off-by: Greg Hackmann <ghackmann@google.com>
In 829c089f83, we disabled all
FORTIFY_SOURCE support when compiling under clang. At the time,
we didn't have proper test cases, and couldn't easily create targeted
clang tests.
This change re-enables FORTIFY_SOURCE support under clang for a
limited set of functions, where we have explicit unittests available.
The functions are:
* memcpy
* memmove
* strcpy
* strncpy
* strcat
* strncat
* memset
* strlen (with modifications)
* strchr (with modifications)
* strrchr (with modifications)
It may be possible, in the future, to enable other functions. However,
I need to write unittests first.
For strlen, strchr, and strrchr, clang unconditionally calls the
fortified version of the relevant function. If it doesn't know the
size of the buffer it's dealing with, it passes in ((size_t) -1),
which is the largest possible size_t.
I added two new clang specific unittest files, primarily copied
from fortify?_test.cpp.
I've also rebuild the entire system with these changes, and didn't
observe any obvious problems.
Change-Id: If12a15089bb0ffe93824b485290d05b14355fcaa
Define __errordecl and replace __attribute__((__error__("foo")))
with __errordecl. Make sure __errordecl is a no-op on clang, as it
generates a compile time warning.
Change-Id: Ifa1a2d3afd6881de9d479fc2adac6737871a2949
Move the implementation of writing to the system property area
from init to bionic, next to the reader implementation. This
will allow full property testing to be added to bionic tests.
Add new accessor and waiting functions to hide the implementation
from watchprops and various bionic users.
Also hide some of the implementation details of the property area
from init by moving them into _system_properties.h, and other details
from everybody by moving them into system_properties.h.
(cherry picked from commit dc1038b790)
Change-Id: I192d3825ee276c5047bc751039fe6cfe226a7cca
Move the implementation of writing to the system property area
from init to bionic, next to the reader implementation. This
will allow full property testing to be added to bionic tests.
Add new accessor and waiting functions to hide the implementation
from watchprops and various bionic users.
Also hide some of the implementation details of the property area
from init by moving them into _system_properties.h, and other details
from everybody by moving them into system_properties.h.
Change-Id: I9026e604109e30546b2849b60cab2e7e5ff00ba5
We were missing SIG_ATOMIC_MAX, SIG_ATOMIC_MIN, SIZE_MAX,
WCHAR_MAX, WCHAR_MIN, WINT_MAX, and WINT_MIN.
Change-Id: I2535f36bc220fbaea009b483599b7af811c4cb5c
Removed 'join_count' from pthread_internal_t and switched to using the flag
PTHREAD_ATTR_FLAG_JOINED to indicate if a thread is being joined. Combined with
a switch to a while loop in pthread_join, this fixes spurious wake-ups but
prevents a thread from being joined multiple times. This is fine for
two reasons:
1) The pthread_join specification allows for undefined behavior when multiple
threads try to join a single thread.
2) There is no thread safe way to allow multiple threads to join a single
thread with the pthread interface. The second thread calling pthread_join
could be pre-empted until the thread is destroyed and its handle reused for
a different thread. Therefore multi-join is always an error.
Bug: https://code.google.com/p/android/issues/detail?id=52255
Change-Id: I8b6784d47620ffdcdbfb14524e7402e21d46c5f7
This reverts commit d8627af159 which caused build breakage:
In file included from bionic/libc/include/limits.h:86:0,
from bionic/libc/include/stdint.h:33,
from bionic/libc/arch-arm/bionic/crtbegin.c:31:
bionic/libc/include/sys/limits.h:30:26: fatal error: linux/limits.h: No such file or directory
compilation terminated.
make: *** [out/target/product/generic/obj/lib/crtbegin_dynamic1.o] Error 1
Change-Id: I128095ecb99df92626e1f57e34c61e08c98a4078
* A dlmalloc usage error shouldn't call abort(3) because we want to
cause a SIGSEGV by writing the address dlmalloc didn't like to an
address the kernel won't like, so that debuggerd will dump the
memory around the address that upset dlmalloc.
* Switch to the simpler FreeBSD/NetBSD style of registering stdio
cleanup. Hopefully this will let us simplify more of the stdio
implementation.
* Clear the stdio cleanup handler before we abort because of a dlmalloc
corruption error. This fixes the reported bug, where we'd hang inside
dlmalloc because the stdio cleanup reentered dlmalloc.
Bug: 9301265
Change-Id: Ief31b389455d6876e5a68f0f5429567d37277dbc
- Implemented chk_memalign.
- Fixed a few bugs in leak_memalign.
- Implemented {leak,fill,check,qemu}_malloc_usable_size.
- Make malloc_usable_size update at run time.
- Add malloc_test.cpp as a small set of tests for the
malloc debug routines.
- Fix the qemu routines since it's been broken since it moved to C++.
- Add support for the %u format to the out_vformat in libc_logging.cpp.
This is used by the emulator code.
Tested using the bionic-unit-tests with setprop libc.debug.malloc
set to 1, 5, and 10.
I tested as much as possible on the emulator, but tracing doesn't appear
to be working properly.
Bug: 6143477
Merge change from internal master.
(cherry-picked from commit 3d594c2580)
Change-Id: I4ae00fffba82315a8c283f35893fd554460722fb
- Implemented chk_memalign.
- Fixed a few bugs in leak_memalign.
- Implemented {leak,fill,check,qemu}_malloc_usable_size.
- Make malloc_usable_size update at run time.
- Add malloc_test.cpp as a small set of tests for the
malloc debug routines.
- Fix the qemu routines since it's been broken since it moved to C++.
- Add support for the %u format to the out_vformat in libc_logging.cpp.
This is used by the emulator code.
Tested using the bionic-unit-tests with setprop libc.debug.malloc
set to 1, 5, and 10.
I tested as much as possible on the emulator, but tracing doesn't appear
to be working properly.
Bug: 6143477
Change-Id: Ieba99b58c2228c88d80afd264501004a4dadd212
Add methods to attach/detach UID ranges to a specific dns cache/interface.
This mirrors the already existing code for attaching specific processes to
specific interfaces but will be used to push all processes from a given
user to a specific cache/interface.
Change-Id: Ic24391e92d3ca46fcb46cc4fc53e13984dec40b3
sigismember, sigaddset, and sigdelset had mixed code and declarations
which are not allowed in C90 and before.
Change-Id: I662af944fc1489e34bed228ce592e41f50d00e17
Signed-off-by: Erik Gilling <konkers@android.com>
__strcat_chk and __strncat_chk are slightly inefficient,
because they end up traversing over the same memory region
two times.
This change optimizes __strcat_chk / __strncat_chk so they
only access the memory once. Although I haven't benchmarked these
changes, it should improve the performance of these functions.
__strlen_chk - expose this function, even if -D_FORTIFY_SOURCE
isn't defined. This is needed to compile libc itself without
-D_FORTIFY_SOURCE.
Change-Id: Id2c70dff55a276b47c59db27a03734d659f84b74
The function should take a 'const void*' parameter, instead of 'void*'.
Note that the implementation in upstream-dlmalloc/malloc.c already does
this.
For context, see http://b.android.com/55725
Change-Id: Iefd55cdb8996699189e0545f9195972490306227
Fix license clause numbering.
Convert libc/stdio from K&R to ANSI C.
And add '__restrict' where it appeared in the header prototypes.
Change-Id: I5fdb22f79d3effa2298d03f9aa8412b4b087da04
Upstream: http://svnweb.freebsd.org/base?view=revision&revision=249810
Add CLOCK_MONOTONIC_RAW, CLOCK_REALTIME_COARSE, and CLOCK_MONOTONIC_COARSE
as supported by recent linux kernels.
(cherry-pick of 60e5144ca312b210b54ac8e6966108da0c97ff80.)
Bug: 8895727
Change-Id: If79a4d05d1301108f49a37588f9416c4be19277a
Add CLOCK_MONOTONIC_RAW, CLOCK_REALTIME_COARSE, and CLOCK_MONOTONIC_COARSE
as supported by recent linux kernels.
Bug: 8895727
Change-Id: I3d415a2edbcf2928dd855e876337bf2239ac134a
Streamline the memcpy a bit removing some unnecessary instructions.
The biggest speed improvement comes from changing the size of
the preload. On krait, the sweet spot for the preload in the main
loop is twice the L1 cache line size.
In most cases, these small tweaks yield > 1000MB/s speed ups. As
the size of the memcpy approaches about 1MB, the speed improvement
disappears.
Change-Id: Ief79694d65324e2db41bee4707dae19b8c24be62
Add support for fortify source level 2 to strncpy.
This will enable detection of more areas where strncpy
is used inappropriately. For example, this would have detected
bug 8727221.
Move the fortify_source tests out of string_test.cpp, and
put it into fortify1_test.cpp.
Create a new fortify2_test.cpp file, which copies all
the tests in fortify1_test.cpp, and adds fortify_source level
2 specific tests.
Change-Id: Ica0fba531cc7d0609e4f23b8176739b13f7f7a83
Pick up Linux kernel patch 2748e5dec7ca8a3804852c7c4171f9156384d15c
from 2007
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2748e5dec7ca8a3804852c7c4171f9156384d15c
[NETFILTER]: Fix iptables ABI breakage on (at least) CRIS
With the introduction of x_tables we accidentally broke compatibility
by defining IPT_TABLE_MAXNAMELEN to XT_FUNCTION_MAXNAMELEN instead of
XT_TABLE_MAXNAMELEN, which is two bytes larger.
On most architectures it doesn't really matter since we don't have
any tables with names that long in the kernel and the structure
layout didn't change because of alignment requirements of following
members. On CRIS however (and other architectures that don't align
data) this changed the structure layout and thus broke compatibility
with old iptables binaries.
Changing it back will break compatibility with binaries compiled
against recent kernels again, but since the breakage has only been
there for three releases this seems like the better choice.
Change-Id: Ie9552b25892109c7042b9752132dc8ebd3552dc3
From the release notes:
Changes affecting current and future time stamps:
Palestine observed DST starting March 29, 2013. (Thanks to
Steffen Thorsen.) From 2013 on, Gaza and Hebron both observe DST,
with the predicted rules being the last Thursday in March at 24:00
to the first Friday on or after September 21 at 01:00.
Assume that the recent change to Paraguay's DST rules is permanent,
by moving the end of DST to the 4th Sunday in March every year.
(Thanks to Carlos Raúl Perasso.)
Changes affecting past time stamps:
Fix some historical data for Palestine to agree with that of
timeanddate.com, as follows:
The spring 2008 change in Gaza and Hebron was on 00:00 Mar 28, not
00:00 Apr 1.
The fall 2009 change in Gaza and Hebron on Sep 4 was at 01:00, not
02:00.
The spring 2010 change in Hebron was 00:00 Mar 26, not 00:01 Mar 27.
The spring 2011 change in Gaza was 00:01 Apr 1, not 12:01 Apr 2.
The spring 2011 change in Hebron on Apr 1 was at 00:01, not 12:01.
The fall 2011 change in Hebron on Sep 30 was at 00:00, not 03:00.
Fix times of habitation for Macquarie to agree with the Tasmania
Parks & Wildlife Service history, which indicates that permanent
habitation was 1899-1919 and 1948 on.
Changing affecting metadata only:
Macquarie Island is politically part of Australia, not Antarctica.
(Thanks to Tobias Conradi.)
Sort Macquarie more-consistently with other parts of Australia.
(Thanks to Tim Parenti.)
Change-Id: I3df146d046eda26dbc6ce2a0a26ad9214ec4eaca
Added the following headers for ALSA compressed
user space API:
- sound/compress_offload.h
- sound/compress_params.h
Change-Id: I9584c12acdadf31546d2921393b93d491e54a8d3
This uses the new code original submitted as memcpy.a15.S as
the base. However, the old code handled unaligned src/dst better
so that was spliced in. I optimized the original unaligned code by
removing a few unnecessary instructions. I optimized the a15 code by
rewriting the pre and post code. I also modified the main loop to add
a pld so that larger copies would not stall waiting for memory.
Test cases for the new memcpy:
- Copy all sized values from 0 to 1024 bytes, using whatever alignment
is returned by malloc.
For each alignment case described below, the test copied from 0 to 128
bytes.
- Src and dst pointers are both aligned to the same value, starting
at one going through every power of two up to and including 128.
- Src aligned to double word boundary, dst aligned to word boundary.
- Src aligned to word boundary, dst aligned to double word boundary.
- Src aligned to 16 bit boundary, dst aligned to word boundary.
- Src aligned to word boundary, dst aligned to 16 byte boundary.
- Src aligned to word boundary, dst aligned to 1 byte from a word
boundary.
- Src aligned to word boundary, dst aligned to 2 bytes from a word
boundary.
- Src aligned to word boundary, dst aligned to 3 bytes from a word
boundary.
- Src aligned to 1 byte from a word boundary, dst aligned to a word
boundary.
- Src aligned to 2 bytes from a word boundary, dst aligned to a word
boundary.
- Src aligned to 3 bytes from a word boundary, dst aligned to a word
boundary.
Cases to verify the unaligned source code properly aligns to a 16 bit
boundary.
- Src aligned to 1 byte from a 128 bit boundary, dst aligned to
4 + 128 bit boundary.
- Src aligned to 1 byte from a 128 bit boundary, dst aligned to
8 + 128 bit boundary.
- Src aligned to 1 byte from a 128 bit boundary, dst aligned to
12 + 128 bit boundary.
- Src aligned to 1 byte from a 128 bit boundary, dst aligned to
16 + 128 bit boundary.
In all cases, a two byte fencepost was placed at the end of the
destination to verify that only the requested number of bytes were copied.
Bug: 8005082
Merge from internal master.
(cherry-picked from commit 21ede92d79)
Change-Id: Ief70c9e6dc8c6473ae245b6570b2c266fed9618c
This adds __libc_fatal, cleans up the internal logging code a bit more,
and switches suitable callers over to __libc_fatal. In addition to logging,
__libc_fatal stashes the message somewhere that the debuggerd signal handler
can find it before calling abort.
In the debuggerd signal handler, we pass this address to debuggerd so that
it can come back with ptrace to read the message and present it to the user.
Bug: 8531731
(cherry picked from commit 0d787c1fa1)
Change-Id: I5daeeaa36c1fc23f7f437d73a19808d9d558dd4d
This adds __libc_fatal, cleans up the internal logging code a bit more,
and switches suitable callers over to __libc_fatal. In addition to logging,
__libc_fatal stashes the message somewhere that the debuggerd signal handler
can find it before calling abort.
In the debuggerd signal handler, we pass this address to debuggerd so that
it can come back with ptrace to read the message and present it to the user.
Bug: 8531731
Change-Id: I416ec1da38a8a1b0d0a582ccd7c8aaa681ed4a29
- eventfd.cpp and eventfd.s will output to the same file when building libc.a
out/target/product/*/obj/STATIC_LIBRARIES/libc_intermediates/WHOLE/libc_common_objs/eventfd.o
- And then `eventfd` will undefined when statically linked to libc.
Also add a unit test.
(cherry-pick of 8baa929d5d3bcf63381cf78ba76168c80c303f5e.)
Change-Id: Icd0eb0f4ce0511fb9ec00a504d491afd47d744d3
We use the system call constants from the kernel header files now,
so there's no need to check that they've been correctly transcribed
into SYSCALLS.TXT.
This is a work in progress. I've added TODOs to SYSCALLS.TXT explaining
what's left to do.
(cherry-pick of a51916b58b2d211bcf8ffdbe9cf7faa58e57382f.)
Change-Id: I4484acd946b1f548ac3d95327e58add9f98246ab
- eventfd.cpp and eventfd.s will output to the same file when building libc.a
out/target/product/*/obj/STATIC_LIBRARIES/libc_intermediates/WHOLE/libc_common_objs/eventfd.o
- And then `eventfd` will undefined when statically linked to libc.
Also add a unit test.
Change-Id: Ib310ade3256712ca617a90539e8eb07459c98505
We use the system call constants from the kernel header files now,
so there's no need to check that they've been correctly transcribed
into SYSCALLS.TXT.
This is a work in progress. I've added TODOs to SYSCALLS.TXT explaining
what's left to do.
Change-Id: I3b86acfe7f84b4da1c802ee5a4ef13a2e83e7939
Currently, our getaddrinfo implementation does not conform to
any IETF standard. It follows draft-ietf-6man-rfc3484-revise-01,
but that draft has expired. Update the policy table to RFC6724.
(cherry-pick of e919b116d35aa7deb24ddece69c491e24c3b0d6f.)
Bug: 8276725
Change-Id: I2d17122defd966ac6c2c13d04887fb110f2598a0
Currently, our getaddrinfo implementation does not conform to
any IETF standard. It follows draft-ietf-6man-rfc3484-revise-01,
but that draft has expired. Update the policy table to RFC6724.
Bug: 8276725
Change-Id: I03c63abfcad9b2f3a3bab2718bd2fc6440531843
This uses the new code original submitted as memcpy.a15.S as
the base. However, the old code handled unaligned src/dst better
so that was spliced in. I optimized the original unaligned code by
removing a few unnecessary instructions. I optimized the a15 code by
rewriting the pre and post code. I also modified the main loop to add
a pld so that larger copies would not stall waiting for memory.
Test cases for the new memcpy:
- Copy all sized values from 0 to 1024 bytes, using whatever alignment
is returned by malloc.
For each alignment case described below, the test copied from 0 to 128
bytes.
- Src and dst pointers are both aligned to the same value, starting
at one going through every power of two up to and including 128.
- Src aligned to double word boundary, dst aligned to word boundary.
- Src aligned to word boundary, dst aligned to double word boundary.
- Src aligned to 16 bit boundary, dst aligned to word boundary.
- Src aligned to word boundary, dst aligned to 16 byte boundary.
- Src aligned to word boundary, dst aligned to 1 byte from a word
boundary.
- Src aligned to word boundary, dst aligned to 2 bytes from a word
boundary.
- Src aligned to word boundary, dst aligned to 3 bytes from a word
boundary.
- Src aligned to 1 byte from a word boundary, dst aligned to a word
boundary.
- Src aligned to 2 bytes from a word boundary, dst aligned to a word
boundary.
- Src aligned to 3 bytes from a word boundary, dst aligned to a word
boundary.
Cases to verify the unaligned source code properly aligns to a 16 bit
boundary.
- Src aligned to 1 byte from a 128 bit boundary, dst aligned to
4 + 128 bit boundary.
- Src aligned to 1 byte from a 128 bit boundary, dst aligned to
8 + 128 bit boundary.
- Src aligned to 1 byte from a 128 bit boundary, dst aligned to
12 + 128 bit boundary.
- Src aligned to 1 byte from a 128 bit boundary, dst aligned to
16 + 128 bit boundary.
In all cases, a two byte fencepost was placed at the end of the
destination to verify that only the requested number of bytes were copied.
Bug: 8005082
Change-Id: I700b2fab81941959d301ab1934c18fbd8ee3eee4
pthread_create returns EAGAIN when it can't allocate a pthread_internal_t,
when it can't allocate a stack for the new thread, or when clone(2) fails
because there are too many threads. It's useful to be able to know why your
pthread_create just failed, so add some logging.
Bug: 8470684
(cherry picked from commit cfa089df23)
Change-Id: Ibfc98a84c1817a931f9ae4c2b88762f0edfb6b79
pthread_create returns EAGAIN when it can't allocate a pthread_internal_t,
when it can't allocate a stack for the new thread, or when clone(2) fails
because there are too many threads. It's useful to be able to know why your
pthread_create just failed, so add some logging.
Bug: 8470684
Change-Id: I1bb4497d4f7528eacce0db35c2014771cba64569
Need to get the defintion of the FITRIM ioctl(). Also need
to update the blk_types.h header file as fs.h includes it.
Change-Id: I617622b620925942dc5aead9e49f8e17d17e5d74
The <asm/unistd.h> files contain the canonical data, and
<sys/glibc-syscalls.h> contain new glibc-compatible names,
and if you #include the standard <sys/syscall.h> you get
both sets of names.
Change-Id: I9919c080931c0ba1660f5e37c6a6265ea716d603
This lets us move all the ARM syscall stubs over to the kernel <asm/unistd.h>.
Our generated <sys/linux-syscalls.h> is now unused, but I'll remove that in a
later change.
Change-Id: Ie5ff2cc4abce1938576af7cbaef615a79c7f310d
Also add a more intention-revealing guard so we don't have loads of
places checking whether our inlining macro is defined.
Change-Id: I168860cedcfc798b07a5145bc48a125700265e47
Need to get the defintion of the FITRIM ioctl(). Also need
to update the blk_types.h header file as fs.h includes it.
Change-Id: I617622b620925942dc5aead9e49f8e17d17e5d74
For some reason, socketcalls.c was only being compiled for ARM, where
it makes no sense. For x86 we generate stubs for the socket functions
that use __NR_socketcall directly.
Change-Id: I84181e6183fae2314ae3ed862276eba82ad21e8e
<sys/linux-syscalls.h> only contains constants for the syscalls
we're generating stubs for. We want all the syscalls available
on the architecture in question.
Keep using <sys/linux-syscalls.h> on ARM for now because the
__NR_ARM_set_tls and __NR_ARM_cacheflush values aren't in <asm/unistd.h>.
Change-Id: I66683950d87d9b18d6107d0acc0ed238a4496f44
Fixes the MIPS and x86 builds. strace tests whether syscalls
are supported using #ifdef of the appropriate SYS_ constant.
Change-Id: I90be118dc42abfdaf5b0f9b1e676e8601f55106e
This uses the new strcmp.a15.S code as the basis for new versions
of strcmp.S.
The cortex-a15 code is the performance optimized version of strcmp.a15.S
taken with only the addition of a few pld instructions.
The cortex-a9 code is the same as the cortex-a15 code except that the
unaligned strcmp code was taken from the original strcmp.S.
The krait code is the same as the cortex-a15 code except that one path
in the unaligned strcmp code was taken from the original strcmp.S code
(the 2 byte overlap case).
The generic code is the original unmodified strmp.S from the bionic
subdirectory.
All three new versions underwent these test cases:
Strings the same, all same size:
- Both pointers double word aligned.
- One pointer double word aligned, one pointer word aligned.
- Both pointers word aligned.
- One pointer double word aligned, one pointer 1 off a word alignment.
- One pointer double word aligned, one pointer 2 off a word alignment.
- One pointer double word aligned, one pointer 3 off a word alignment.
- One pointer word aligned, one pointer 1 off a word alignment.
- One pointer word aligned, one pointer 2 off a word alignment.
- One pointer word aligned, one pointer 3 off a word alignment.
For all cases where it made sense, the two pointers were also tested
swapped.
Different strings, all same size:
- Single difference at double word boundary.
- Single difference at word boudary.
- Single difference at 1 off a word alignment.
- Single difference at 2 off a word alignment.
- Single difference at 3 off a word alignment.
Different sized strings, strings the same until the end:
- Shorter string ends on a double word boundary.
- Shorter string ends on word boundary.
- Shorter string ends at 1 off a word boundary.
- Shorter string ends at 2 off a word boundary.
- Shorter string ends at 3 off a word boundary.
For all different cases, run them through the same pointer alignment
cases when the strings are the same size.
For all cases the two pointers were also tested swapped.
Bug: 8005082
Merge from internal master.
(cherry-picked from commit a9a5870d16)
Change-Id: I4c2b98f8a50804fb98ab67f75e9d660f1315a144
We only need one logging API, and I prefer the one that does no
allocation and is thus safe to use in any context.
Also use O_CLOEXEC when opening the /dev/log files.
Move everything logging-related into one header file.
Change-Id: Ic1e3ea8e9b910dc29df351bff6c0aa4db26fbb58
The defines HAVE_32_BYTE_CACHE_LINES and ARCH_ARM_USE_NON_NEON_MEMCPY
are not used by any code. The previous memcpy code that used these
has been split into different architecture versions to avoid the need
for them.
Bug: 8005082
Merge from internal master.
(cherry-picked from commit 6e1a5cf31b)
Change-Id: Ib18fc3f4131b21cdbd19b9dde7697ac25d066fcf
In the old code, the index was a file to itself, so it made sense to
read until you hit the end of the file. In the new code, the index is
followed by hundreds of KiB of data, so we need to just search the
index.
Bug: 8368791
Change-Id: Icf5f8b5516cf3a93679fa849c9f6cd1cb100e0f1
Move arch specific code for arm, mips, x86 into separate
makefiles.
In addition, add different arm cpu versions of memcpy/memset.
Bug: 8005082
Merge from internal master (acdde8c1cf).
Change-Id: I04f3d0715104fab618e1abf7cf8f7eec9bec79df
This uses the new strcmp.a15.S code as the basis for new versions
of strcmp.S.
The cortex-a15 code is the performance optimized version of strcmp.a15.S
taken with only the addition of a few pld instructions.
The cortex-a9 code is the same as the cortex-a15 code except that the
unaligned strcmp code was taken from the original strcmp.S.
The krait code is the same as the cortex-a15 code except that one path
in the unaligned strcmp code was taken from the original strcmp.S code
(the 2 byte overlap case).
The generic code is the original unmodified strmp.S from the bionic
subdirectory.
All three new versions underwent these test cases:
Strings the same, all same size:
- Both pointers double word aligned.
- One pointer double word aligned, one pointer word aligned.
- Both pointers word aligned.
- One pointer double word aligned, one pointer 1 off a word alignment.
- One pointer double word aligned, one pointer 2 off a word alignment.
- One pointer double word aligned, one pointer 3 off a word alignment.
- One pointer word aligned, one pointer 1 off a word alignment.
- One pointer word aligned, one pointer 2 off a word alignment.
- One pointer word aligned, one pointer 3 off a word alignment.
For all cases where it made sense, the two pointers were also tested
swapped.
Different strings, all same size:
- Single difference at double word boundary.
- Single difference at word boudary.
- Single difference at 1 off a word alignment.
- Single difference at 2 off a word alignment.
- Single difference at 3 off a word alignment.
Different sized strings, strings the same until the end:
- Shorter string ends on a double word boundary.
- Shorter string ends on word boundary.
- Shorter string ends at 1 off a word boundary.
- Shorter string ends at 2 off a word boundary.
- Shorter string ends at 3 off a word boundary.
For all different cases, run them through the same pointer alignment
cases when the strings are the same size.
For all cases the two pointers were also tested swapped.
Bug: 8005082
Change-Id: I5f3dc02b48afba2cb9c13332ab45c828ff171a1c
Normally, the C library implicitly caches your timezone by virtue
of the fact that the prehistoric API assumes a single timezone for
the entire process.
The unfortunate mktime_tz and localtime_tz extensions work around
this, but represent timezones as strings to their callers, so code
that makes heavy use of these needs a cache to be able to perform
acceptably until it can hopefully one day be rewritten to use
java.util.Calendar or icu4c.
Bug: 8270865
Change-Id: I92e3964e86dc33ceac925f819cc5e26ff4203f50
From the release notes:
Changes affecting current and future time stamps:
Haiti uses US daylight-saving rules this year, and presumably future years.
This changes time stamps starting today. (Thanks to Steffen Thorsen.)
Paraguay will end DST on March 24 this year.
(Thanks to Steffen Thorsen.) For now, assume it's just this year.
Morocco does not observe DST during Ramadan;
try to predict Ramadan in Morocco as best we can.
(Thanks to Erik Homoet for the heads-up.)
Change-Id: I98d5290ea5a1d9fb1eeddab1c9e72135dc9e4bd1
This gets us back to using vfork now our ARM vfork assembler stub is
fixed, and adds the missing thread safety for the 'pidlist'.
Bug: 5335385
Change-Id: Ib08bfa65b2cb9fa695717aae629ea14816bf988d
From the release notes:
Chile's 2013 rules, and we guess rules for 2014 and later, will be
the same as 2012, namely Apr Sun>=23 03:00 UTC to Sep Sun>=2 04:00 UTC.
(Thanks to Steffen Thorsen and Robert Elz.)
New Zones Asia/Khandyga, Asia/Ust-Nera, Europe/Busingen.
(Thanks to Tobias Conradi and Arthur David Olson.)
Change-Id: I351e04b3348420ad7df7c648963c235b534033d2
This is actually a slightly newer upstream version than the one I
originally pulled. Hopefully now it's in upstream-freebsd it will
be easier to track upstream, though I still need to sit down and
write the necessary scripts at some point.
Bug: 5110679
Change-Id: I87e563f0f95aa8e68b45578e2a8f448bbf827a33
The defines HAVE_32_BYTE_CACHE_LINES and ARCH_ARM_USE_NON_NEON_MEMCPY
are not used by any code. The previous memcpy code that used these
has been split into different architecture versions to avoid the need
for them.
Bug: 8005082
(cherry picked from commit 6e1a5cf31b)
Change-Id: I69654d47db1458136782b5504290f620e924ee75
Don't pull in unnecessary header files. AFAIK, I've fixed all
the code which didn't include the correct header files.
Change-Id: If0b7bba74e77cb24a0cf9ce8968aa07400855e58
The attached patch provides a new implementation of strcmp for ARM,
using LDRD instead of LDR whenever possible.
For older architectures that do not support LDRD, this implementation
uses the same algorithm as before.
Testing and benchmarking:
* Validation: successfully passes a test that compares different strings
of length 1-128 and offsets 0-8 from a word boundary. Checked on
qemu/A15/A9, ARM/Thumb mode, Big/Little Endian.
* Integration with gcc: no regression on qemu for arm-none-eabi --with-cpu
a15/a9 --with-mode arm/thumb.
Change-Id: I9e230e1b99dbdc9119b69ee858a89038c516a4ea
Signed-off-by: Vassilis Laganakos <vasileios.laganakos@arm.com>
The strategy for large block sizes is LDRD and STRD with offset addressing,
where the main loop copies 64 bytes in every iteration, (i.e., 8 calls to
LDRD and STRD pairs), interleaving load and stores (i.e., the pairs of LDRD
and STRD of the same data are consecutive instructions), and the writeback
of an updated address is a separate instruction, which allows us to write
back the accumulated update once per iteration.
This strategy is implemented in memcpy.S. In some configurations, a plain
version of memcpy (included from memcpy-stub.c) is used instead of the
optimized one.
Validation:
* Correctness: checked memcpy using a test harness for block sizes
ranging between 1 to 128, and source and destination buffers alignment
ranging in { 0,1,2,3,4,8,12 } bytes each.
* Performance: benchmarking on Cortex-A15 FPGA indicates that this strategy
is better for A15 than the strategy used by glibc and even slightly better
than using NEON. Benchmarking on Cortex-A9 bare metal and Linux shows
that the proposed strategy is reasonable: not as fast as the version of
memcpy from glibc (which is the best open source strategy for A9), but
comparable with csl and bionic.
* Integration with GCC: no regression for arm-none-eabi --with-cpu
cortex-a15 and cortex-a9.
Change-Id: Ied56354d8992c62ae3e02d582a2bd55585d814b9
Signed-off-by: Vassilis Laganakos <vasileios.laganakos@arm.com>
Move arch specific code for arm, mips, x86 into separate
makefiles.
In addition, add different arm cpu versions of memcpy/memset.
Bug: 8005082
(cherry picked from commit acdde8c1cf)
Change-Id: I0108d432af9f6283ae99adfc92a3399e5ab3e31d
Stricter input parameters help avoid ugly casting when passing
pointers to immutable protobuf data.
While at it: an int return was dropped from 2 functions whose users
never used the result; one of the return paths was returning an
uninitialized value.
Size_t for portablity and warning supression, misc warnings addressed.
Change-Id: I2d5cbdaf0c9b6c4621a7d397772da13da5dc0943
The defines HAVE_32_BYTE_CACHE_LINES and ARCH_ARM_USE_NON_NEON_MEMCPY
are not used by any code. The previous memcpy code that used these
has been split into different architecture versions to avoid the need
for them.
Bug: 8005082
Change-Id: I14e0368c5bb4c3a80e72520f7cfd97e359918cce
Move arch specific code for arm, mips, x86 into separate
makefiles.
In addition, add different arm cpu versions of memcpy/memset.
Bug: 8005082
Change-Id: I04f3d0715104fab618e1abf7cf8f7eec9bec79df
Per "man capset", sys/capability.h is the appropriate header file
for the capget / capset definition, not unistd.h. Fixed.
As a short term hack, continue to include sys/capability.h in
unistd.h, until we can fix all the code which uses capget / capset.
Change-Id: I6e7cf55955d761ca785a14c5e4b7a44125d8fc15
The old scandir implementation didn't take into account the varying
size of directory entries, and didn't correctly clean up on its
error exits.
Bug: 7339844
Change-Id: Ib40e3564709752241a3119a496cbb2192e3f9abe
