The libcorkscrew stack unwinder does not understand cfi directives,
so add .save directives so that it can function properly.
Also add the directives in to strcmp.S and fix a missing set of
directives in cortex-a9/memcpy_base.S.
Bug: 10345269
Change-Id: I043f493e0bb6c45bd3f4906fbe1d9f628815b015
This change pulls the memcpy code out into a new file so that the
__strcpy_chk and __strcat_chk can use it with an include.
The new versions of the two chk functions uses assembly versions
of strlen and memcpy to implement this check. This allows near
parity with the assembly versions of strcpy/strcat. It also means that
as memcpy implementations get faster, so do the chk functions.
Other included changes:
- Change all of the assembly labels to local labels. The other labels
confuse gdb and mess up backtracing.
- Add .cfi_startproc and .cfi_endproc directives so that gdb is not
confused when falling through from one function to another.
- Change all functions to use cfi directives since they are more powerful.
- Move the memcpy_chk fail code outside of the memcpy function definition
so that backtraces work properly.
- Preserve lr before the calls to __fortify_chk_fail so that the backtrace
actually works.
Testing:
- Ran the bionic unit tests. Verified all error messages in logs are set
correctly.
- Ran libc_test, replacing strcpy with __strcpy_chk and replacing
strcat with __strcat_chk.
- Ran the debugger on nexus10, nexus4, and old nexus7. Verified that the
backtrace is correct for all fortify check failures. Also verify that
when falling through from __memcpy_chk to memcpy that the backtrace is
still correct. Also verified the same for __memset_chk and bzero.
Verified the two different paths in the cortex-a9 memset routine that
save variables to the stack still show the backtrace properly.
Bug: 9293744
Change-Id: Id5aec8c3cb14101d91bd125eaf3770c9c8aa3f57
(cherry picked from commit 2be91915dc)
Create one version of strcat/strcpy/strlen for cortex-a15/krait and another
version for cortex-a9.
Tested with the libc_test strcat/strcpy/strlen tests.
Including new tests that verify that the src for strcat/strcpy do not
overread across page boundaries.
NOTE: The handling of unaligned strcpy (same code in strcat) could probably
be optimized further such that the src is read 64 bits at a time instead of
the partial reads occurring now.
strlen improves slightly since it was recently optimized.
Performance improvements for strcpy and strcat (using an empty dest string):
cortex-a9
- Small copies vary from about 5% to 20% as the size gets above 10 bytes.
- Copies >= 1024, about a 60% improvement.
- Unaligned copies, from about 40% improvement.
cortex-a15
- Most small copies exhibit a 100% improvement, a few copies only
improve by 20%.
- Copies >= 1024, about 150% improvement.
- Unaligned copies, about 100% improvement.
krait
- Most small copies vary widely, but on average 20% improvement, then
the performance gets better, hitting about a 100% improvement when
copies 64 bytes of data.
- Copies >= 1024, about 100% improvement.
- When coping MBs of data, about 50% improvement.
- Unaligned copies, about 90% improvement.
As strcat destination strings get larger in size:
cortex-a9
- about 40% improvement for small dst strings (>= 32).
- about 250% improvement for dst strings >= 1024.
cortex-a15
- about 200% improvement for small dst strings (>=32).
- about 250% improvement for dst strings >= 1024.
krait
- about 25% improvement for small dst strings (>=32).
- about 100% improvement for dst strings >=1024.
Merge from internal master.
(cherry-picked from d119b7b6f4)
Change-Id: I296463b251ef9fab004ee4dded2793feca5b547a
Use the new __bionic_name_mem function to name malloc'd memory as
"libc_malloc" on kernels that support it.
Change-Id: I7235eae6918fa107010039b9ab8b7cb362212272
Only works on some kernels, and only on page-aligned regions of
anonymous memory. It will show up in /proc/pid/maps as
[anon:<name>] and in /proc/pid/smaps as Name: <name>
Change-Id: If31667cf45ff41cc2a79a140ff68707526def80e
This change creates assembler versions of __memcpy_chk/__memset_chk
that is implemented in the memcpy/memset assembler code. This change
avoids an extra call to memcpy/memset, instead allowing a simple fall
through to occur from the chk code into the body of the real
implementation.
Testing:
- Ran the libc_test on __memcpy_chk/__memset_chk on all nexus devices.
- Wrote a small test executable that has three calls to __memcpy_chk and
three calls to __memset_chk. First call dest_len is length + 1. Second
call dest_len is length. Third call dest_len is length - 1.
Verified that the first two calls pass, and the third fails. Examined
the logcat output on all nexus devices to verify that the fortify
error message was sent properly.
- I benchmarked the new __memcpy_chk and __memset_chk on all systems. For
__memcpy_chk and large copies, the savings is relatively small (about 1%).
For small copies, the savings is large on cortex-a15/krait devices
(between 5% to 30%).
For cortex-a9 and small copies, the speed up is present, but relatively
small (about 3% to 5%).
For __memset_chk and large copies, the savings is also small (about 1%).
However, all processors show larger speed-ups on small copies (about 30% to
100%).
Bug: 9293744
Change-Id: I8926d59fe2673e36e8a27629e02a7b7059ebbc98
__memcmp16 was missing in x86. Also added C-version for backward
compatibility. Added bionic test for __memcmp16 and for wmemcmp.
Change-Id: I33718441e7ee343cdb021d91dbeaf9ce2d4d7eb4
Signed-off-by: Alexander Ivchenko <alexander.ivchenko@intel.com>
Create one version of strcat/strcpy/strlen for cortex-a15/krait and another
version for cortex-a9.
Tested with the libc_test strcat/strcpy/strlen tests.
Including new tests that verify that the src for strcat/strcpy do not
overread across page boundaries.
NOTE: The handling of unaligned strcpy (same code in strcat) could probably
be optimized further such that the src is read 64 bits at a time instead of
the partial reads occurring now.
strlen improves slightly since it was recently optimized.
Performance improvements for strcpy and strcat (using an empty dest string):
cortex-a9
- Small copies vary from about 5% to 20% as the size gets above 10 bytes.
- Copies >= 1024, about a 60% improvement.
- Unaligned copies, from about 40% improvement.
cortex-a15
- Most small copies exhibit a 100% improvement, a few copies only
improve by 20%.
- Copies >= 1024, about 150% improvement.
- Unaligned copies, about 100% improvement.
krait
- Most small copies vary widely, but on average 20% improvement, then
the performance gets better, hitting about a 100% improvement when
copies 64 bytes of data.
- Copies >= 1024, about 100% improvement.
- When coping MBs of data, about 50% improvement.
- Unaligned copies, about 90% improvement.
As strcat destination strings get larger in size:
cortex-a9
- about 40% improvement for small dst strings (>= 32).
- about 250% improvement for dst strings >= 1024.
cortex-a15
- about 200% improvement for small dst strings (>=32).
- about 250% improvement for dst strings >= 1024.
krait
- about 25% improvement for small dst strings (>=32).
- about 100% improvement for dst strings >=1024.
Change-Id: Ifd091ebdbce70fe35a7c5d8f71d5914255f3af35
Patch is required in NDK headers as well to be able to build multilib
GCC with libgomp support.
It's here: https://android-review.googlesource.com/#/c/62982
Change-Id: I2bec25d8cbca0e5ef1a0857008ececd92f4911be
Signed-off-by: Pavel Chupin <pavel.v.chupin@intel.com>
A refactor caused us to not tell the resolver about search domains
until after it had done the domain fanout.
bug:6799630
Change-Id: Ibabd8fa5bcc69b1490fc5e329e62eb0f2d1a5e63
Also make sysconf use PTHREAD_STACK_MIN rather than redefining its
own, different, constant.
Bug: 9997352
Change-Id: I9a8e7d2b18e691439abfb45533e82c36eee9e81d
This is needed when passing -mcpu=cortex-a9 or higher on a modern
toolchain for prebuilt library compatibility
Change-Id: I73eb2393377914ae26216a8c2828ad973d1c1225
