zlib 1.2.7

crc_table is made using a four-byte integer (when that can be
determined).  However get_crc_table() returned a pointer to an
unsigned long, which could be eight bytes.  This fixes that by
creating a new z_crc_t type for the crc_table.

This type is also used for the BYFOUR crc calculations that depend
on a four-byte type.  The four-byte type can now be determined by
./configure, which also solves a problem where ./configure --solo
would never use BYFOUR.  No the Z_U4 #define indicates that four-
byte integer was found either by ./configure or by zconf.h.

CMakeLists.txt

@@ -3,9 +3,13 @@ set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
 
 project(zlib C)
 
-if(NOT DEFINED BUILD_SHARED_LIBS)
-    option(BUILD_SHARED_LIBS "Build a shared library form of zlib" ON)
-endif()
+set(VERSION "1.2.7")
+
+set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables")
+set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries")
+set(INSTALL_INC_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE PATH "Installation directory for headers")
+set(INSTALL_MAN_DIR "${CMAKE_INSTALL_PREFIX}/share/man" CACHE PATH "Installation directory for manual pages")
+set(INSTALL_PKGCONFIG_DIR "${CMAKE_INSTALL_PREFIX}/share/pkgconfig" CACHE PATH "Installation directory for pkgconfig (.pc) files")
 
 include(CheckTypeSize)
 include(CheckFunctionExists)
@@ -56,23 +60,27 @@ if(MSVC)
     set(CMAKE_DEBUG_POSTFIX "d")
     add_definitions(-D_CRT_SECURE_NO_DEPRECATE)
     add_definitions(-D_CRT_NONSTDC_NO_DEPRECATE)
+    include_directories(${CMAKE_CURRENT_SOURCE_DIR})
 endif()
 
 if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
     # If we're doing an out of source build and the user has a zconf.h
     # in their source tree...
     if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h)
-        message(FATAL_ERROR
-            "You must remove ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h "
-            "from the source tree.  This file is included with zlib "
-            "but CMake generates this file for you automatically "
-            "in the build directory.")
+        message(STATUS "Renaming")
+        message(STATUS "    ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h")
+        message(STATUS "to 'zconf.h.included' because this file is included with zlib")
+        message(STATUS "but CMake generates it automatically in the build directory.")
+        file(RENAME ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.included)
   endif()
 endif()
 
-configure_file(${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein
+set(ZLIB_PC ${CMAKE_CURRENT_BINARY_DIR}/zlib.pc)
+configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/zlib.pc.cmakein
+		${ZLIB_PC} @ONLY)
+configure_file(	${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein
 		${CMAKE_CURRENT_BINARY_DIR}/zconf.h @ONLY)
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
+include_directories(${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_SOURCE_DIR})
 
 
 #============================================================================
@@ -120,7 +128,7 @@ endif()
 
 # parse the full version number from zlib.h and include in ZLIB_FULL_VERSION
 file(READ ${CMAKE_CURRENT_SOURCE_DIR}/zlib.h _zlib_h_contents)
-string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([0-9A-Za-z.]+)\".*"
+string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([-0-9A-Za-z.]+)\".*"
     "\\1" ZLIB_FULL_VERSION ${_zlib_h_contents})
 
 if(MINGW)
@@ -139,9 +147,9 @@ if(MINGW)
     set(ZLIB_SRCS ${ZLIB_SRCS} ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj)
 endif(MINGW)
 
-add_library(zlib ${ZLIB_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+add_library(zlib SHARED ${ZLIB_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+add_library(zlibstatic STATIC ${ZLIB_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
 set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL)
-
 set_target_properties(zlib PROPERTIES SOVERSION 1)
 
 if(NOT CYGWIN)
@@ -157,23 +165,27 @@ endif()
 
 if(UNIX)
     # On unix-like platforms the library is almost always called libz
-   set_target_properties(zlib PROPERTIES OUTPUT_NAME z)
+   set_target_properties(zlib zlibstatic PROPERTIES OUTPUT_NAME z)
+   set_target_properties(zlib PROPERTIES LINK_FLAGS "-Wl,--version-script,${CMAKE_CURRENT_SOURCE_DIR}/zlib.map")
 elseif(BUILD_SHARED_LIBS AND WIN32)
     # Creates zlib1.dll when building shared library version
     set_target_properties(zlib PROPERTIES SUFFIX "1.dll")
 endif()
 
 if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL )
-    install(TARGETS zlib
-        RUNTIME DESTINATION bin
-        ARCHIVE DESTINATION lib
-        LIBRARY DESTINATION lib )
+    install(TARGETS zlib zlibstatic
+        RUNTIME DESTINATION "${INSTALL_BIN_DIR}"
+        ARCHIVE DESTINATION "${INSTALL_LIB_DIR}"
+        LIBRARY DESTINATION "${INSTALL_LIB_DIR}" )
 endif()
 if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL )
-    install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION include)
+    install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION "${INSTALL_INC_DIR}")
 endif()
 if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
-    install(FILES zlib.3 DESTINATION share/man/man3)
+    install(FILES zlib.3 DESTINATION "${INSTALL_MAN_DIR}/man3")
+endif()
+if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
+    install(FILES ${ZLIB_PC} DESTINATION "${INSTALL_PKGCONFIG_DIR}")
 endif()
 
 #============================================================================

ChangeLog

@@ -1,6 +1,54 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.2.7 (2 May 2012)
+- Replace use of memmove() with a simple copy for portability
+- Test for existence of strerror
+- Restore gzgetc_ for backward compatibility with 1.2.6
+- Fix build with non-GNU make on Solaris
+- Require gcc 4.0 or later on Mac OS X to use the hidden attribute
+- Include unistd.h for Watcom C
+- Use __WATCOMC__ instead of __WATCOM__
+- Do not use the visibility attribute if NO_VIZ defined
+- Improve the detection of no hidden visibility attribute
+- Avoid using __int64 for gcc or solo compilation
+- Cast to char * in gzprintf to avoid warnings [Zinser]
+- Fix make_vms.com for VAX [Zinser]
+- Don't use library or built-in byte swaps
+- Simplify test and use of gcc hidden attribute
+- Fix bug in gzclose_w() when gzwrite() fails to allocate memory
+- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen()
+- Fix bug in test/minigzip.c for configure --solo
+- Fix contrib/vstudio project link errors [Mohanathas]
+- Add ability to choose the builder in make_vms.com [Schweda]
+- Add DESTDIR support to mingw32 win32/Makefile.gcc
+- Fix comments in win32/Makefile.gcc for proper usage
+- Allow overriding the default install locations for cmake
+- Generate and install the pkg-config file with cmake
+- Build both a static and a shared version of zlib with cmake
+- Include version symbols for cmake builds
+- If using cmake with MSVC, add the source directory to the includes
+- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta]
+- Move obsolete emx makefile to old [Truta]
+- Allow the use of -Wundef when compiling or using zlib
+- Avoid the use of the -u option with mktemp
+- Improve inflate() documentation on the use of Z_FINISH
+- Recognize clang as gcc
+- Add gzopen_w() in Windows for wide character path names
+- Rename zconf.h in CMakeLists.txt to move it out of the way
+- Add source directory in CMakeLists.txt for building examples
+- Look in build directory for zlib.pc in CMakeLists.txt
+- Remove gzflags from zlibvc.def in vc9 and vc10
+- Fix contrib/minizip compilation in the MinGW environment
+- Update ./configure for Solaris, support --64 [Mooney]
+- Remove -R. from Solaris shared build (possible security issue)
+- Avoid race condition for parallel make (-j) running example
+- Fix type mismatch between get_crc_table() and crc_table
+- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler]
+- Fix the path to zlib.map in CMakeLists.txt
+- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe]
+- Add instructions to win32/Makefile.gcc for shared install [Torri]
+
 Changes in 1.2.6.1 (12 Feb 2012)
 - Avoid the use of the Objective-C reserved name "id"
 - Include io.h in gzguts.h for Microsoft compilers

INDEX

@@ -17,6 +17,7 @@ zlib.3          Man page for zlib
 zlib.3.pdf      Man page in PDF format
 zlib.map        Linux symbol information
 zlib.pc.in      Template for pkg-config descriptor
+zlib.pc.cmakein zlib.pc template for cmake
 zlib2ansi       perl script to convert source files for C++ compilation
 
 amiga/          makefiles for Amiga SAS C

Makefile.in

@@ -32,7 +32,7 @@ CPP=$(CC) -E
 
 STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.6.1
+SHAREDLIBV=libz.so.1.2.7
 SHAREDLIBM=libz.so.1
 LIBS=$(STATICLIB) $(SHAREDLIBV)
 
@@ -53,7 +53,6 @@ includedir = ${prefix}/include
 mandir = ${prefix}/share/man
 man3dir = ${mandir}/man3
 pkgconfigdir = ${libdir}/pkgconfig
-tempfile := $(shell mktemp -u __XXXXXX)
 
 OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o
 OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
@@ -84,32 +83,35 @@ check: test
 test: all teststatic testshared
 
 teststatic: static
-	@if echo hello world | ./minigzip | ./minigzip -d && ./example; then \
+	@TMPST=`mktemp fooXXXXXX`; \
+	if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \
 	  echo '		*** zlib test OK ***'; \
 	else \
 	  echo '		*** zlib test FAILED ***'; false; \
-	fi
-	-@rm -f foo.gz
+	fi; \
+	rm -f $$TMPST
 
 testshared: shared
 	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
 	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
 	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
 	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
-	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh; then \
+	TMPSH=`mktemp fooXXXXXX`; \
+	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \
 	  echo '		*** zlib shared test OK ***'; \
 	else \
 	  echo '		*** zlib shared test FAILED ***'; false; \
-	fi
-	-@rm -f foo.gz
+	fi; \
+	rm -f $$TMPSH
 
 test64: all64
-	@if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64; then \
+	@TMP64=`mktemp fooXXXXXX`; \
+	if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \
 	  echo '		*** zlib 64-bit test OK ***'; \
 	else \
 	  echo '		*** zlib 64-bit test FAILED ***'; false; \
-	fi
-	-@rm -f foo.gz
+	fi; \
+	rm -f $$TMP64
 
 infcover.o: test/infcover.c zlib.h zconf.h
 	$(CC) $(CFLAGS) -I. -c -o $@ test/infcover.c
@@ -228,10 +230,11 @@ zlib.3.pdf: zlib.3
 	groff -mandoc -f H -T ps zlib.3 | ps2pdf - zlib.3.pdf
 
 zconf.h.cmakein: zconf.h.in
-	-@echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" > $(tempfile)
-	-@sed -f $(tempfile) zconf.h.in > zconf.h.cmakein
-	-@touch -r zconf.h.in zconf.h.cmakein
-	-@rm $(tempfile)
+	-@ TEMPFILE=`mktemp __XXXXXX`; \
+	echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\
+	sed -f $$TEMPFILE zconf.h.in > zconf.h.cmakein &&\
+	touch -r zconf.h.in zconf.h.cmakein &&\
+	rm $$TEMPFILE
 
 zconf: zconf.h.in
 	cp -p zconf.h.in zconf.h

README

@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.6.1 is a general purpose data compression library.  All the code is
+zlib 1.2.7 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -31,7 +31,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.6.1 are documented in the file ChangeLog.
+The changes made in version 1.2.7 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 

as400/compile.clp

@@ -105,6 +105,6 @@
                                  &MODLIB/TREES       &MODLIB/UNCOMPR     +
                                  &MODLIB/ZUTIL)                          +
                           SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC)       +
-                          TEXT('ZLIB 1.2.6.1') TGTRLS(&TGTRLS)
+                          TEXT('ZLIB 1.2.7') TGTRLS(&TGTRLS)
 
              ENDPGM

as400/readme.txt

@@ -1,4 +1,4 @@
-        ZLIB version 1.2.6.1 for AS400 installation instructions
+        ZLIB version 1.2.7 for AS400 installation instructions
 
 I) From an AS400 *SAVF file:
 

as400/zlib.inc

@@ -1,7 +1,7 @@
       *  ZLIB.INC - Interface to the general purpose compression library
       *
       *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.6.1
+      *  Version 1.2.7
       *
       *
       *  WARNING:
@@ -22,14 +22,14 @@
       *
       *  Versioning information.
       *
-     D ZLIB_VERSION    C                   '1.2.6.1'
-     D ZLIB_VERNUM     C                   X'1261'
+     D ZLIB_VERSION    C                   '1.2.7'
+     D ZLIB_VERNUM     C                   X'1270'
      D ZLIB_VER_MAJOR  C                   1
      D ZLIB_VER_MINOR  C                   2
      D ZLIB_VER_REVISION...
-     D                 C                   6
+     D                 C                   7
      D ZLIB_VER_SUBREVISION...
-     D                 C                   1
+     D                 C                   0
       *
       *  Other equates.
       *

configure

@@ -13,20 +13,27 @@
 # If you have problems, try without defining CC and CFLAGS before reporting
 # an error.
 
+# start off configure.log
 echo -------------------- >> configure.log
 echo $0 $* >> configure.log
 date >> configure.log
 
+# set command prefix for cross-compilation
 if [ -n "${CHOST}" ]; then
     uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`"
     CROSS_PREFIX="${CHOST}-"
 fi
 
+# destination name for static library
 STATICLIB=libz.a
+
+# extract zlib version numbers from zlib.h
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
 VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
 VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
 VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
+
+# establish commands for library building
 if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
     AR=${AR-"${CROSS_PREFIX}ar"}
     test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log
@@ -47,6 +54,8 @@ if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
 else
     NM=${NM-"nm"}
 fi
+
+# set defaults before processing command line options
 LDCONFIG=${LDCONFIG-"ldconfig"}
 LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
 ARCHS=
@@ -68,6 +77,7 @@ old_cflags="$CFLAGS"
 OBJC='$(OBJZ) $(OBJG)'
 PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)'
 
+# process command line options
 while test $# -ge 1
 do
 case "$1" in
@@ -100,6 +110,7 @@ case "$1" in
     esac
 done
 
+# define functions for testing compiler and library characteristics and logging the results
 test=ztest$$
 
 show()
@@ -136,8 +147,21 @@ else
   }
 fi
 
+tryboth()
+{
+  show $*
+  got=`( $* ) 2>&1`
+  ret=$?
+  printf %s "$got" >> configure.log
+  if test $ret -ne 0; then
+    return $ret
+  fi
+  test "$got" = ""
+}
+
 echo >> configure.log
 
+# check for gcc vs. cc and set compile and link flags based on the system identified by uname
 cat > $test.c <<EOF
 extern int getchar();
 int hello() {return getchar();}
@@ -149,6 +173,7 @@ cflags=${CFLAGS-"-O3"}
 # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
 case "$cc" in
   *gcc*) gcc=1 ;;
+  *clang*) gcc=1 ;;
 esac
 case `$cc -v 2>&1` in
   *gcc*) gcc=1 ;;
@@ -206,7 +231,7 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) >> configure.log 2>&1; then
              SHAREDLIBV=libz.$VER$shared_ext
              SHAREDLIBM=libz.$VER1$shared_ext
              LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
-             AR="libtool"
+             AR="/usr/bin/libtool"
              ARFLAGS="-o" ;;
   *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
   esac
@@ -251,15 +276,28 @@ else
              CFLAGS=${CFLAGS-"-O3"}
              LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
   SunOS\ 5* | solaris*)
-         LDSHARED=${LDSHARED-"cc -G"}
+         LDSHARED=${LDSHARED-"cc -G -h libz$shared_ext.$VER1"}
+         SFLAGS=${CFLAGS-"-fast -KPIC"}
+         CFLAGS=${CFLAGS-"-fast"}
+         if test $build64 -eq 1; then
+             # old versions of SunPRO/Workshop/Studio don't support -m64,
+             # but newer ones do.  Check for it.
+             flag64=`$CC -flags | egrep -- '^-m64'`
+             if test x"$flag64" != x"" ; then
+                 CFLAGS="${CFLAGS} -m64"
+                 SFLAGS="${SFLAGS} -m64"
+             else
                  case `(uname -m || echo unknown) 2>/dev/null` in
                    i86*)
-             SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
-             CFLAGS=${CFLAGS-"-xpentium -fast"} ;;
+                     SFLAGS="$SFLAGS -xarch=amd64"
+                     CFLAGS="$CFLAGS -xarch=amd64" ;;
                    *)
-             SFLAGS=${CFLAGS-"-fast -xcg92 -KPIC -R."}
-             CFLAGS=${CFLAGS-"-fast -xcg92"} ;;
-         esac ;;
+                     SFLAGS="$SFLAGS -xarch=v9"
+                     CFLAGS="$CFLAGS -xarch=v9" ;;
+                 esac
+             fi
+         fi
+         ;;
   SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
              CFLAGS=${CFLAGS-"-O2"}
              LDSHARED=${LDSHARED-"ld"} ;;
@@ -289,12 +327,14 @@ else
   esac
 fi
 
+# destination names for shared library if not defined above
 SHAREDLIB=${SHAREDLIB-"libz$shared_ext"}
 SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"}
 SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"}
 
 echo >> configure.log
 
+# see if shared library build supported
 if test $shared -eq 1; then
   echo Checking for shared library support... | tee -a configure.log
   # we must test in two steps (cc then ld), required at least on SunOS 4.x
@@ -322,6 +362,9 @@ else
   TEST="all teststatic testshared"
 fi
 
+echo >> configure.log
+
+# check for underscores in external names for use by assembler code
 CPP=${CPP-"$CC -E"}
 case $CFLAGS in
   *ASMV*)
@@ -337,6 +380,7 @@ esac
 
 echo >> configure.log
 
+# check for large file support, and if none, check for fseeko()
 cat > $test.c <<EOF
 #include <sys/types.h>
 off64_t dummy = 0;
@@ -367,10 +411,28 @@ EOF
   fi
 fi
 
+echo >> configure.log
+
+# check for strerror() for use by gz* functions
+cat > $test.c <<EOF
+#include <string.h>
+#include <errno.h>
+int main() { return strlen(strerror(errno)); }
+EOF
+if try $CC $CFLAGS -o $test $test.c; then
+  echo "Checking for strerror... Yes." | tee -a configure.log
+else
+  CFLAGS="${CFLAGS} -DNO_STRERROR"
+  SFLAGS="${SFLAGS} -DNO_STRERROR"
+  echo "Checking for strerror... No." | tee -a configure.log
+fi
+
+# copy clean zconf.h for subsequent edits
 cp -p zconf.h.in zconf.h
 
 echo >> configure.log
 
+# check for unistd.h and save result in zconf.h
 cat > $test.c <<EOF
 #include <unistd.h>
 int main() { return 0; }
@@ -385,6 +447,7 @@ fi
 
 echo >> configure.log
 
+# check for stdarg.h and save result in zconf.h
 cat > $test.c <<EOF
 #include <stdarg.h>
 int main() { return 0; }
@@ -397,6 +460,7 @@ else
   echo "Checking for stdarg.h... No." | tee -a configure.log
 fi
 
+# if the z_ prefix was requested, save that in zconf.h
 if test $zprefix -eq 1; then
   sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
   mv zconf.temp.h zconf.h
@@ -404,6 +468,7 @@ if test $zprefix -eq 1; then
   echo "Using z_ prefix on all symbols." | tee -a configure.log
 fi
 
+# if --solo compilation was requested, save that in zconf.h and remove gz stuff from object lists
 if test $solo -eq 1; then
   sed '/#define ZCONF_H/a\
 #define Z_SOLO
@@ -414,6 +479,7 @@ OBJC='$(OBJZ)'
 PIC_OBJC='$(PIC_OBJZ)'
 fi
 
+# if code coverage testing was requested, use older gcc if defined, e.g. "gcc-4.2" on Mac OS X
 if test $cover -eq 1; then
   CFLAGS="${CFLAGS} -fprofile-arcs -ftest-coverage"
   if test -n "$GCC_CLASSIC"; then
@@ -423,6 +489,10 @@ fi
 
 echo >> configure.log
 
+# conduct a series of tests to resolve eight possible cases of using "vs" or "s" printf functions
+# (using stdarg or not), with or without "n" (proving size of buffer), and with or without a
+# return value.  The most secure result is vsnprintf() with a return value.  snprintf() with a
+# return value is secure as well, but then gzprintf() will be limited to 20 arguments.
 cat > $test.c <<EOF
 #include <stdio.h>
 #include <stdarg.h>
@@ -435,7 +505,6 @@ int main()
   return 0;
 }
 EOF
-
 if try $CC -c $CFLAGS $test.c; then
   echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()." | tee -a configure.log
 
@@ -609,29 +678,53 @@ EOF
   fi
 fi
 
+# see if we can hide zlib internal symbols that are linked between separate source files
 if test "$gcc" -eq 1; then
   echo >> configure.log
   cat > $test.c <<EOF
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33)
-#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-#else
-#  define ZLIB_INTERNAL
-#endif
+#define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
 int ZLIB_INTERNAL foo;
 int main()
 {
   return 0;
 }
 EOF
-  if try $CC -c $CFLAGS $test.c; then
+  if tryboth $CC -c $CFLAGS $test.c; then
+    CFLAGS="$CFLAGS -DHAVE_HIDDEN"
+    SFLAGS="$SFLAGS -DHAVE_HIDDEN"
     echo "Checking for attribute(visibility) support... Yes." | tee -a configure.log
   else
-    CFLAGS="$CFLAGS -DNO_VIZ"
-    SFLAGS="$SFLAGS -DNO_VIZ"
     echo "Checking for attribute(visibility) support... No." | tee -a configure.log
   fi
 fi
 
+echo >> configure.log
+
+# find a four-byte unsiged integer type for crc calculations
+cat > $test.c <<EOF
+#include <stdio.h>
+#define is32(n,t) for(n=1,k=0;n;n<<=1,k++);if(k==32){puts(t);return 0;}
+int main() {
+    int k;
+    unsigned i;
+    unsigned long l;
+    unsigned short s;
+    is32(i, "unsigned")
+    is32(l, "unsigned long")
+    is32(s, "unsigned short")
+    return 1;
+}
+EOF
+Z_U4=""
+if try $CC $CFLAGS $test.c -o $test && Z_U4=`./$test` && test -n "$Z_U4"; then
+  sed < zconf.h "/#define Z_U4/s/\/\* \.\/configure may/#define Z_U4 $Z_U4   \/* .\/configure put the/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Looking for a four-byte integer type... Found." | tee -a configure.log
+else
+  echo "Looking for a four-byte integer type... Not found." | tee -a configure.log
+fi
+
+# clean up files produced by running the compiler and linker
 rm -f $test.[co] $test $test$shared_ext $test.gcno
 
 # show the results in the log
@@ -657,6 +750,7 @@ echo SHAREDLIBV = $SHAREDLIBV >> configure.log
 echo STATICLIB = $STATICLIB >> configure.log
 echo TEST = $TEST >> configure.log
 echo VER = $VER >> configure.log
+echo Z_U4 = $Z_U4 >> configure.log
 echo exec_prefix = $exec_prefix >> configure.log
 echo includedir = $includedir >> configure.log
 echo libdir = $libdir >> configure.log
@@ -668,7 +762,7 @@ echo -------------------- >> configure.log
 echo >> configure.log
 echo >> configure.log
 
-# udpate Makefile
+# udpate Makefile with the configure results
 sed < Makefile.in "
 /^CC *=/s#=.*#=$CC#
 /^CFLAGS *=/s#=.*#=$CFLAGS#
@@ -698,6 +792,7 @@ sed < Makefile.in "
 /^test: */s#:.*#: $TEST#
 " > Makefile
 
+# create zlib.pc with the configure results
 sed < zlib.pc.in "
 /^CC *=/s#=.*#=$CC#
 /^CFLAGS *=/s#=.*#=$CFLAGS#

contrib/delphi/ZLib.pas

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.6.1';
+  zlib_version = '1.2.7';
 
 type
   EZlibError = class(Exception);

contrib/dotzlib/DotZLib/UnitTests.cs

@@ -156,7 +156,7 @@ namespace DotZLibTests
         public void Info_Version()
         {
             Info info = new Info();
-            Assert.AreEqual("1.2.6.1", Info.Version);
+            Assert.AreEqual("1.2.7", Info.Version);
             Assert.AreEqual(32, info.SizeOfUInt);
             Assert.AreEqual(32, info.SizeOfULong);
             Assert.AreEqual(32, info.SizeOfPointer);

contrib/infback9/inftree9.c

@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.6.1 Copyright 1995-2012 Mark Adler ";
+   " inflate9 1.2.7 Copyright 1995-2012 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 207, 66};
+        133, 133, 133, 133, 144, 78, 68};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,

contrib/minizip/Makefile.am

@@ -10,11 +10,17 @@ zlib_top_builddir = $(top_builddir)/../..
 AM_CPPFLAGS = -I$(zlib_top_srcdir)
 AM_LDFLAGS = -L$(zlib_top_builddir)
 
+if WIN32
+iowin32_src = iowin32.c
+iowin32_h = iowin32.h
+endif
+
 libminizip_la_SOURCES = \
 	ioapi.c \
 	mztools.c \
 	unzip.c \
-	zip.c
+	zip.c \
+	${iowin32_src}
 
 libminizip_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0 -lz
 
@@ -24,7 +30,8 @@ minizip_include_HEADERS = \
 	ioapi.h \
 	mztools.h \
 	unzip.h \
-	zip.h
+	zip.h \
+	${iowin32_h}
 
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = minizip.pc

contrib/minizip/configure.ac

@@ -1,7 +1,7 @@
 #                                               -*- Autoconf -*-
 # Process this file with autoconf to produce a configure script.
 
-AC_INIT([minizip], [1.2.6.1], [bugzilla.redhat.com])
+AC_INIT([minizip], [1.2.7], [bugzilla.redhat.com])
 AC_CONFIG_SRCDIR([minizip.c])
 AM_INIT_AUTOMAKE([foreign])
 LT_INIT
@@ -16,6 +16,16 @@ else
 	AC_MSG_RESULT([no])
 fi
 
+case "${host}" in
+	*-mingw* | mingw*)
+		WIN32="yes"
+		;;
+	*)
+		;;
+esac
+AM_CONDITIONAL([WIN32], [test "${WIN32}" = "yes"])
+
+
 AC_SUBST([HAVE_UNISTD_H], [0])
 AC_CHECK_HEADER([unistd.h], [HAVE_UNISTD_H=1], [])
 AC_CONFIG_FILES([Makefile minizip.pc])

contrib/pascal/zlibpas.pas

@@ -10,8 +10,8 @@ unit zlibpas;
 interface
 
 const
-  ZLIB_VERSION = '1.2.6.1';
-  ZLIB_VERNUM  = $1261;
+  ZLIB_VERSION = '1.2.7';
+  ZLIB_VERNUM  = $1270;
 
 type
   alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;

contrib/vstudio/readme.txt

@@ -1,8 +1,8 @@
-Building instructions for the DLL versions of Zlib 1.2.4
+Building instructions for the DLL versions of Zlib 1.2.7
 ========================================================
 
 This directory contains projects that build zlib and minizip using
-Microsoft Visual C++ 9.0/10.0, and Visual C++ .
+Microsoft Visual C++ 9.0/10.0.
 
 You don't need to build these projects yourself. You can download the
 binaries from:
@@ -10,9 +10,6 @@ binaries from:
 
 More information can be found at this site.
 
-first compile assembly code by running
-bld_ml64.bat in contrib\masmx64
-bld_ml32.bat in contrib\masmx86
 
 
 
@@ -20,13 +17,16 @@ bld_ml32.bat in contrib\masmx86
 Build instructions for Visual Studio 2008 (32 bits or 64 bits)
 --------------------------------------------------------------
 - Uncompress current zlib, including all contrib/* files
-- Open contrib\vstudio\vc9\zlibvc.sln with Microsoft Visual C++ 2008.0
+- Compile assembly code (with Visual Studio Command Prompt) by running:
+   bld_ml64.bat (in contrib\masmx64)
+   bld_ml32.bat (in contrib\masmx86)
+- Open contrib\vstudio\vc9\zlibvc.sln with Microsoft Visual C++ 2008
 - Or run: vcbuild /rebuild contrib\vstudio\vc9\zlibvc.sln "Release|Win32"
 
 Build instructions for Visual Studio 2010 (32 bits or 64 bits)
 --------------------------------------------------------------
 - Uncompress current zlib, including all contrib/* files
-- Open contrib\vstudio\vc10\zlibvc.sln with Microsoft Visual C++ 2010.0
+- Open contrib\vstudio\vc10\zlibvc.sln with Microsoft Visual C++ 2010
 
 
 Important

contrib/vstudio/vc10/testzlibdll.vcxproj

@@ -139,7 +139,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
       <SubSystem>Console</SubSystem>
@@ -169,7 +169,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <SubSystem>Console</SubSystem>
       <OptimizeReferences>true</OptimizeReferences>
@@ -200,7 +200,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
       <SubSystem>Console</SubSystem>
@@ -227,7 +227,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
       <SubSystem>Console</SubSystem>
@@ -257,7 +257,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <SubSystem>Console</SubSystem>
       <OptimizeReferences>true</OptimizeReferences>
@@ -288,7 +288,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <SubSystem>Console</SubSystem>
       <OptimizeReferences>true</OptimizeReferences>

contrib/vstudio/vc10/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1.2.6.1,1
-  PRODUCTVERSION 1.2.6.1,1
+  FILEVERSION	 1.2.7,0
+  PRODUCTVERSION 1.2.7,0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.6.1\0"
+      VALUE "FileVersion",	"1.2.7\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"

contrib/vstudio/vc10/zlibvc.def

@@ -1,7 +1,7 @@
 LIBRARY
 ; zlib data compression and ZIP file I/O library
 
-VERSION		1.24
+VERSION		1.2.7
 
 EXPORTS
         adler32                                  @1
@@ -134,3 +134,6 @@ EXPORTS
         gzgetc_                                 @161
         inflateResetKeep                        @163
         deflateResetKeep                        @164
+
+; zlib1 v1.2.7 added:
+        gzopen_w                                @165

contrib/vstudio/vc10/zlibvc.vcxproj

@@ -180,6 +180,12 @@
     <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
     <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
     <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">zlibwapi</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">zlibwapi</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">zlibwapi</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">zlibwapi</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">zlibwapi</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|x64'">zlibwapi</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <Midl>
@@ -227,6 +233,10 @@
       </DataExecutionPrevention>
       <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
     </Link>
+    <PreBuildEvent>
+      <Command>cd ..\..\masmx86
+bld_ml32.bat</Command>
+    </PreBuildEvent>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
     <Midl>
@@ -324,6 +334,10 @@
       </DataExecutionPrevention>
       <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
     </Link>
+    <PreBuildEvent>
+      <Command>cd ..\..\masmx86
+bld_ml32.bat</Command>
+    </PreBuildEvent>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
     <Midl>
@@ -368,6 +382,10 @@
       <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
       <TargetMachine>MachineX64</TargetMachine>
     </Link>
+    <PreBuildEvent>
+      <Command>cd ..\..\contrib\masmx64
+bld_ml64.bat</Command>
+    </PreBuildEvent>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
     <Midl>
@@ -547,6 +565,10 @@
       <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
       <TargetMachine>MachineX64</TargetMachine>
     </Link>
+    <PreBuildEvent>
+      <Command>cd ..\..\masmx64
+bld_ml64.bat</Command>
+    </PreBuildEvent>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
     <Midl>

contrib/vstudio/vc9/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1.2.6.1,1
-  PRODUCTVERSION 1.2.6.1,1
+  FILEVERSION	 1.2.7,0
+  PRODUCTVERSION 1.2.7,0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.6.1\0"
+      VALUE "FileVersion",	"1.2.7\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"

contrib/vstudio/vc9/zlibvc.def

@@ -1,7 +1,7 @@
 LIBRARY
 ; zlib data compression and ZIP file I/O library
 
-VERSION		1.24
+VERSION		1.2.7
 
 EXPORTS
         adler32                                  @1
@@ -134,3 +134,6 @@ EXPORTS
         gzgetc_                                 @161
         inflateResetKeep                        @163
         deflateResetKeep                        @164
+
+; zlib1 v1.2.7 added:
+        gzopen_w                                @165

crc32.c

@@ -32,40 +32,17 @@
 
 #define local static
 
-/* Find a four-byte integer type for crc32_little() and crc32_big(). */
-#ifdef Z_SOLO
-#  define NOBYFOUR
-#endif
-#ifndef NOBYFOUR
-#  ifdef STDC           /* need ANSI C limits.h to determine sizes */
-#    include <limits.h>
-#    define BYFOUR
-#    if (UINT_MAX == 0xffffffffUL)
-       typedef unsigned int u4;
-#    else
-#      if (ULONG_MAX == 0xffffffffUL)
-         typedef unsigned long u4;
-#      else
-#        if (USHRT_MAX == 0xffffffffUL)
-           typedef unsigned short u4;
-#        else
-#          undef BYFOUR     /* can't find a four-byte integer type! */
-#        endif
-#      endif
-#    endif
-#  endif /* STDC */
-#endif /* !NOBYFOUR */
-
 /* Definitions for doing the crc four data bytes at a time. */
+#if !defined(NOBYFOUR) && defined(Z_U4)
+#  define BYFOUR
+#endif
 #ifdef BYFOUR
-   typedef u4 crc_table_t;
    local unsigned long crc32_little OF((unsigned long,
                         const unsigned char FAR *, unsigned));
    local unsigned long crc32_big OF((unsigned long,
                         const unsigned char FAR *, unsigned));
 #  define TBLS 8
 #else
-   typedef unsigned long crc_table_t;
 #  define TBLS 1
 #endif /* BYFOUR */
 
@@ -79,10 +56,10 @@ local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
 #ifdef DYNAMIC_CRC_TABLE
 
 local volatile int crc_table_empty = 1;
-local crc_table_t FAR crc_table[TBLS][256];
+local z_crc_t FAR crc_table[TBLS][256];
 local void make_crc_table OF((void));
 #ifdef MAKECRCH
-   local void write_table OF((FILE *, const crc_table_t FAR *));
+   local void write_table OF((FILE *, const z_crc_t FAR *));
 #endif /* MAKECRCH */
 /*
   Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
@@ -112,9 +89,9 @@ local void make_crc_table OF((void));
 */
 local void make_crc_table()
 {
-    crc_table_t c;
+    z_crc_t c;
     int n, k;
-    crc_table_t poly;                   /* polynomial exclusive-or pattern */
+    z_crc_t poly;                       /* polynomial exclusive-or pattern */
     /* terms of polynomial defining this crc (except x^32): */
     static volatile int first = 1;      /* flag to limit concurrent making */
     static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
@@ -128,11 +105,11 @@ local void make_crc_table()
         /* make exclusive-or pattern from polynomial (0xedb88320UL) */
         poly = 0;
         for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
-            poly |= (crc_table_t)1 << (31 - p[n]);
+            poly |= (z_crc_t)1 << (31 - p[n]);
 
         /* generate a crc for every 8-bit value */
         for (n = 0; n < 256; n++) {
-            c = (crc_table_t)n;
+            c = (z_crc_t)n;
             for (k = 0; k < 8; k++)
                 c = c & 1 ? poly ^ (c >> 1) : c >> 1;
             crc_table[0][n] = c;
@@ -169,7 +146,7 @@ local void make_crc_table()
         if (out == NULL) return;
         fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
         fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
-        fprintf(out, "local const crc_table_t FAR ");
+        fprintf(out, "local const z_crc_t FAR ");
         fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
         write_table(out, crc_table[0]);
 #  ifdef BYFOUR
@@ -189,7 +166,7 @@ local void make_crc_table()
 #ifdef MAKECRCH
 local void write_table(out, table)
     FILE *out;
-    const crc_table_t FAR *table;
+    const z_crc_t FAR *table;
 {
     int n;
 
@@ -210,13 +187,13 @@ local void write_table(out, table)
 /* =========================================================================
  * This function can be used by asm versions of crc32()
  */
-const unsigned long FAR * ZEXPORT get_crc_table()
+const z_crc_t FAR * ZEXPORT get_crc_table()
 {
 #ifdef DYNAMIC_CRC_TABLE
     if (crc_table_empty)
         make_crc_table();
 #endif /* DYNAMIC_CRC_TABLE */
-    return (const unsigned long FAR *)crc_table;
+    return (const z_crc_t FAR *)crc_table;
 }
 
 /* ========================================================================= */
@@ -238,7 +215,7 @@ unsigned long ZEXPORT crc32(crc, buf, len)
 
 #ifdef BYFOUR
     if (sizeof(void *) == sizeof(ptrdiff_t)) {
-        u4 endian;
+        z_crc_t endian;
 
         endian = 1;
         if (*((unsigned char *)(&endian)))
@@ -272,17 +249,17 @@ local unsigned long crc32_little(crc, buf, len)
     const unsigned char FAR *buf;
     unsigned len;
 {
-    register u4 c;
-    register const u4 FAR *buf4;
+    register z_crc_t c;
+    register const z_crc_t FAR *buf4;
 
-    c = (u4)crc;
+    c = (z_crc_t)crc;
     c = ~c;
     while (len && ((ptrdiff_t)buf & 3)) {
         c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
         len--;
     }
 
-    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
     while (len >= 32) {
         DOLIT32;
         len -= 32;
@@ -312,17 +289,17 @@ local unsigned long crc32_big(crc, buf, len)
     const unsigned char FAR *buf;
     unsigned len;
 {
-    register u4 c;
-    register const u4 FAR *buf4;
+    register z_crc_t c;
+    register const z_crc_t FAR *buf4;
 
-    c = ZSWAP32((u4)crc);
+    c = ZSWAP32((z_crc_t)crc);
     c = ~c;
     while (len && ((ptrdiff_t)buf & 3)) {
         c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
         len--;
     }
 
-    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
     buf4--;
     while (len >= 32) {
         DOBIG32;

crc32.h

@@ -2,7 +2,7 @@
  * Generated automatically by crc32.c
  */
 
-local const crc_table_t FAR crc_table[TBLS][256] =
+local const z_crc_t FAR crc_table[TBLS][256] =
 {
   {
     0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,

deflate.c

@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.6.1 Copyright 1995-2012 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.2.7 Copyright 1995-2012 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot

gzguts.h

@@ -12,7 +12,7 @@
 #  endif
 #endif
 
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+#ifdef HAVE_HIDDEN
 #  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
 #else
 #  define ZLIB_INTERNAL
@@ -27,7 +27,11 @@
 #endif
 #include <fcntl.h>
 
-#if defined(__TURBOC__) || defined(_MSC_VER)
+#ifdef _WIN32
+#  include <stddef.h>
+#endif
+
+#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
 #  include <io.h>
 #endif
 
@@ -100,7 +104,7 @@
 #  include <windows.h>
 #  define zstrerror() gz_strwinerror((DWORD)GetLastError())
 #else
-#  ifdef STDC
+#  ifndef NO_STRERROR
 #    include <errno.h>
 #    define zstrerror() strerror(errno)
 #  else

gzlib.c

@@ -1,5 +1,5 @@
 /* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010, 2011 Mark Adler
+ * Copyright (C) 2004, 2010, 2011, 2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -17,7 +17,7 @@
 
 /* Local functions */
 local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const char *, int, const char *));
+local gzFile gz_open OF((const void *, int, const char *));
 
 #if defined UNDER_CE
 
@@ -89,11 +89,19 @@ local void gz_reset(state)
 
 /* Open a gzip file either by name or file descriptor. */
 local gzFile gz_open(path, fd, mode)
-    const char *path;
+    const void *path;
     int fd;
     const char *mode;
 {
     gz_statep state;
+    size_t len;
+    int oflag;
+#ifdef O_CLOEXEC
+    int cloexec = 0;
+#endif
+#ifdef O_EXCL
+    int exclusive = 0;
+#endif
 
     /* check input */
     if (path == NULL)
@@ -133,6 +141,16 @@ local gzFile gz_open(path, fd, mode)
                 return NULL;
             case 'b':       /* ignore -- will request binary anyway */
                 break;
+#ifdef O_CLOEXEC
+            case 'e':
+                cloexec = 1;
+                break;
+#endif
+#ifdef O_EXCL
+            case 'x':
+                exclusive = 1;
+                break;
+#endif
             case 'f':
                 state->strategy = Z_FILTERED;
                 break;
@@ -168,29 +186,57 @@ local gzFile gz_open(path, fd, mode)
     }
 
     /* save the path name for error messages */
-    state->path = malloc(strlen(path) + 1);
+#ifdef _WIN32
+    if (fd == -2) {
+        len = wcstombs(NULL, path, 0);
+        if (len == (size_t)-1)
+            len = 0;
+    }
+    else
+#endif
+        len = strlen(path);
+    state->path = malloc(len + 1);
     if (state->path == NULL) {
         free(state);
         return NULL;
     }
+#ifdef _WIN32
+    if (fd == -2)
+        if (len)
+            wcstombs(state->path, path, len + 1);
+        else
+            *(state->path) = 0;
+    else
+#endif
         strcpy(state->path, path);
 
-    /* open the file with the appropriate mode (or just use fd) */
-    state->fd = fd != -1 ? fd :
-        open(path,
+    /* compute the flags for open() */
+    oflag =
 #ifdef O_LARGEFILE
         O_LARGEFILE |
 #endif
 #ifdef O_BINARY
         O_BINARY |
+#endif
+#ifdef O_CLOEXEC
+        (cloexec ? O_CLOEXEC : 0) |
 #endif
         (state->mode == GZ_READ ?
          O_RDONLY :
-                (O_WRONLY | O_CREAT | (
-                    state->mode == GZ_WRITE ?
+         (O_WRONLY | O_CREAT |
+#ifdef O_EXCL
+          (exclusive ? O_EXCL : 0) |
+#endif
+          (state->mode == GZ_WRITE ?
            O_TRUNC :
-                        O_APPEND))),
-            0666);
+           O_APPEND)));
+
+    /* open the file with the appropriate flags (or just use fd) */
+    state->fd = fd > -1 ? fd : (
+#ifdef _WIN32
+        fd == -2 ? _wopen(path, oflag, 0666) :
+#endif
+        open(path, oflag, 0666));
     if (state->fd == -1) {
         free(state->path);
         free(state);
@@ -244,6 +290,16 @@ gzFile ZEXPORT gzdopen(fd, mode)
     return gz;
 }
 
+/* -- see zlib.h -- */
+#ifdef _WIN32
+gzFile ZEXPORT gzopen_w(path, mode)
+    const wchar_t *path;
+    const char *mode;
+{
+    return gz_open(path, -2, mode);
+}
+#endif
+
 /* -- see zlib.h -- */
 int ZEXPORT gzbuffer(file, size)
     gzFile file;

gzread.c

@@ -57,8 +57,13 @@ local int gz_avail(state)
     if (state->err != Z_OK && state->err != Z_BUF_ERROR)
         return -1;
     if (state->eof == 0) {
-        if (strm->avail_in)
-            memmove(state->in, strm->next_in, strm->avail_in);
+        if (strm->avail_in) {       /* copy what's there to the start */
+            unsigned char *p = state->in, *q = strm->next_in;
+            unsigned n = strm->avail_in;
+            do {
+                *p++ = *q++;
+            } while (--n);
+        }
         if (gz_load(state, state->in + strm->avail_in,
                     state->size - strm->avail_in, &got) == -1)
             return -1;
@@ -340,7 +345,7 @@ int ZEXPORT gzread(file, buf, len)
             /* get more output, looking for header if required */
             if (gz_fetch(state) == -1)
                 return -1;
-            continue;       /* no progress yet -- go back to memcpy() above */
+            continue;       /* no progress yet -- go back to copy above */
             /* the copy above assures that we will leave with space in the
                output buffer, allowing at least one gzungetc() to succeed */
         }
@@ -403,6 +408,12 @@ int ZEXPORT gzgetc(file)
     return ret < 1 ? -1 : buf[0];
 }
 
+int ZEXPORT gzgetc_(file)
+gzFile file;
+{
+    return gzgetc(file);
+}
+
 /* -- see zlib.h -- */
 int ZEXPORT gzungetc(c, file)
     int c;

gzwrite.c

@@ -338,19 +338,19 @@ int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
     va_start(va, format);
 #ifdef NO_vsnprintf
 #  ifdef HAS_vsprintf_void
-    (void)vsprintf(state->in, format, va);
+    (void)vsprintf((char *)(state->in), format, va);
     va_end(va);
     for (len = 0; len < size; len++)
         if (state->in[len] == 0) break;
 #  else
-    len = vsprintf(state->in, format, va);
+    len = vsprintf((char *)(state->in), format, va);
     va_end(va);
 #  endif
 #else
 #  ifdef HAS_vsnprintf_void
-    (void)vsnprintf(state->in, size, format, va);
+    (void)vsnprintf((char *)(state->in), size, format, va);
     va_end(va);
-    len = strlen(state->in);
+    len = strlen((char *)(state->in));
 #  else
     len = vsnprintf((char *)(state->in), size, format, va);
     va_end(va);
@@ -416,22 +416,23 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
     state->in[size - 1] = 0;
 #ifdef NO_snprintf
 #  ifdef HAS_sprintf_void
-    sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
+    sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
     for (len = 0; len < size; len++)
         if (state->in[len] == 0) break;
 #  else
-    len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
+    len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
                   a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
 #  endif
 #else
 #  ifdef HAS_snprintf_void
-    snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+    snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
              a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    len = strlen(state->in);
+    len = strlen((char *)(state->in));
 #  else
-    len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
-                 a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
+                   a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
+                   a19, a20);
 #  endif
 #endif
 
@@ -546,6 +547,7 @@ int ZEXPORT gzclose_w(file)
     }
 
     /* flush, free memory, and close file */
+    if (state->size) {
         if (gz_comp(state, Z_FINISH) == -1)
             ret = state->err;
         if (!state->direct) {
@@ -553,6 +555,7 @@ int ZEXPORT gzclose_w(file)
             free(state->out);
         }
         free(state->in);
+    }
     gz_error(state, Z_OK, NULL);
     free(state->path);
     if (close(state->fd) == -1)

inftrees.c

@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.6.1 Copyright 1995-2012 Mark Adler ";
+   " inflate 1.2.7 Copyright 1995-2012 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 207, 66};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 78, 68};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,

make_vms.com

@@ -18,9 +18,12 @@ $! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples
 $!               subdir path, update module search in makefile.in
 $! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned
 $!               shared image creation
+$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared
+$!               image
+$! 0.09 20120305 SMS.  P1 sets builder ("MMK", "MMS", " " (built-in)).
+$!               "" -> automatic, preference: MMK, MMS, built-in.
 $!
 $ on error then goto err_exit
-$ set proc/parse=ext
 $!
 $ true  = 1
 $ false = 0
@@ -36,12 +39,12 @@ $ s_case   = False
 $!
 $! Setup variables holding "config" information
 $!
-$ Make    = ""
+$ Make    = "''p1'"
 $ name     = "Zlib"
 $ version  = "?.?.?"
 $ v_string = "ZLIB_VERSION"
 $ v_file   = "zlib.h"
-$ ccopt   = ""
+$ ccopt   = "/include = []"
 $ lopts   = ""
 $ dnsrl   = ""
 $ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in"
@@ -54,16 +57,25 @@ $ vax      = f$getsyi("HW_MODEL").lt.1024
 $ axp      = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096
 $ ia64     = f$getsyi("HW_MODEL").ge.4096
 $!
-$ whoami = f$parse(f$enviornment("Procedure"),,,,"NO_CONCEAL")
+$! 2012-03-05 SMS.
+$! Why is this needed?  And if it is needed, why not simply ".not. vax"?
+$!
+$!!! if axp .or. ia64 then  set proc/parse=extended
+$!
+$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL")
 $ mydef  = F$parse(whoami,,,"DEVICE")
 $ mydir  = f$parse(whoami,,,"DIRECTORY") - "]["
 $ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type")
 $!
 $! Check for MMK/MMS
 $!
+$ if (Make .eqs. "")
+$ then
 $   If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
 $   If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
-$!
+$ else
+$   Make = f$edit( Make, "trim")
+$ endif
 $!
 $ gosub find_version
 $!
@@ -91,6 +103,10 @@ $       ccopt = "/decc" + ccopt
 $       define sys decc$library_include:
 $     endif
 $   endif
+$!
+$! 2012-03-05 SMS.
+$! Why /NAMES = AS_IS?  Why not simply ".not. vax"?  And why not on VAX?
+$!
 $   if axp .or. ia64
 $   then
 $       ccopt = ccopt + "/name=as_is/opt=(inline=speed)"
@@ -135,15 +151,20 @@ $   gosub check_config
 $ endif
 $ goto aconf_loop
 $ACONF_EXIT:
+$ write aconf ""
+$ write aconf "/* VMS specifics added by make_vms.com: */"
 $ write aconf "#define VMS 1"
 $ write aconf "#include <unistd.h>"
 $ write aconf "#include <unixio.h>"
 $ write aconf "#ifdef _LARGEFILE"
-$ write aconf "#define off64_t __off64_t"
-$ write aconf "#define fopen64 fopen"
-$ write aconf "#define fseeko64 fseeko"
-$ write aconf "#define lseek64 lseek"
-$ write aconf "#define ftello64 ftell"
+$ write aconf "# define off64_t __off64_t"
+$ write aconf "# define fopen64 fopen"
+$ write aconf "# define fseeko64 fseeko"
+$ write aconf "# define lseek64 lseek"
+$ write aconf "# define ftello64 ftell"
+$ write aconf "#endif"
+$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)"
+$ write aconf "# define HAVE_VSNPRINTF"
 $ write aconf "#endif"
 $ close aconf_in
 $ close aconf
@@ -153,7 +174,8 @@ $!
 $ write sys$output "Compiling Zlib sources ..."
 $ if make.eqs.""
 $ then
-$   dele example.obj;*,minigzip.obj;*
+$   if (f$search( "example.obj;*") .nes. "") then delete example.obj;*
+$   if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;*
 $   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
                 adler32.c zlib.h zconf.h
 $   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
@@ -187,33 +209,27 @@ $   CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
 $   write sys$output "Building Zlib ..."
 $   CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
 $   write sys$output "Building example..."
-$   CALL MAKE example.OBJ "CC ''CCOPT'/include=[] [.test]example" -
+$   CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" -
                 [.test]example.c zlib.h zconf.h
 $   call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$   if f$search("x11vms:xvmsutils.olb") .nes. ""
-$   then
 $   write sys$output "Building minigzip..."
-$     CALL MAKE minigzip.OBJ "CC ''CCOPT'/include=[] [.test]minigzip" -
+$   CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" -
               [.test]minigzip.c zlib.h zconf.h
 $   call make minigzip.exe -
-                "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
+              "LINK minigzip,libz.olb/lib" -
               minigzip.obj libz.olb
-$   endif
 $ else
 $   gosub crea_mms
 $   write sys$output "Make ''name' ''version' with ''Make' "
 $   'make'
 $ endif
 $!
-$! Alpha gets a shareable image
+$! Create shareable image
 $!
-$ If axp .or. ia64
-$ Then
 $ gosub crea_olist
 $ write sys$output "Creating libzshr.exe"
 $ call map_2_shopt 'mapfile' 'optfile'
 $ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt
-$ endif
 $ write sys$output "Zlib build completed"
 $ delete/nolog tmp.opt;*
 $ exit
@@ -228,7 +244,6 @@ $ERR_EXIT:
 $ set message/facil/ident/sever/text
 $ close/nolog optf
 $ close/nolog topt
-$ close/nolog conf_hin
 $ close/nolog aconf_in
 $ close/nolog aconf
 $ close/nolog out
@@ -419,10 +434,9 @@ OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\
 $ eod
 $ write out "CFLAGS=", ccopt
 $ write out "LOPTS=", lopts
+$ write out "all : example.exe minigzip.exe libz.olb"
 $ copy sys$input: out
 $ deck
-
-all : example.exe minigzip.exe libz.olb
         @ write sys$output " Example applications available"
 
 libz.olb : libz.olb($(OBJS))
@@ -432,7 +446,7 @@ example.exe : example.obj libz.olb
               link $(LOPTS) example,libz.olb/lib
 
 minigzip.exe : minigzip.obj libz.olb
-              link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+              link $(LOPTS) minigzip,libz.olb/lib
 
 clean :
 	delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
@@ -444,7 +458,6 @@ compress.obj : compress.c zlib.h zconf.h
 crc32.obj    : crc32.c zutil.h zlib.h zconf.h
 deflate.obj  : deflate.c deflate.h zutil.h zlib.h zconf.h
 example.obj  : [.test]example.c zlib.h zconf.h
-              cc $(CFLAGS)/include=[] [.test]example.c
 gzclose.obj  : gzclose.c zutil.h zlib.h zconf.h
 gzlib.obj    : gzlib.c zutil.h zlib.h zconf.h
 gzread.obj   : gzread.c zutil.h zlib.h zconf.h
@@ -453,7 +466,6 @@ inffast.obj  : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
 inflate.obj  : inflate.c zutil.h zlib.h zconf.h
 inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
 minigzip.obj : [.test]minigzip.c zlib.h zconf.h
-              cc $(CFLAGS)/include=[] [.test]minigzip.c
 trees.obj    : trees.c deflate.h zutil.h zlib.h zconf.h
 uncompr.obj  : uncompr.c zlib.h zconf.h
 zutil.obj    : zutil.c zutil.h zlib.h zconf.h
@@ -709,6 +721,7 @@ $! image from it
 $!
 $! Version history
 $! 0.01 20120128 First version
+$! 0.02 20120226 Add pre-load logic
 $!
 $ MAP_2_SHOPT: Subroutine
 $!
@@ -725,6 +738,10 @@ $    SAY "MAP_2_SHOPT:  Error, no output file provided"
 $    goto exit_m2s
 $ ENDIF
 $!
+$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary"
+$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread"
+$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary"
+$ module4 = "inflateSync#uncompress#zlibVersion#compress"
 $ open/read map 'p1
 $ if axp .or. ia64
 $ then
@@ -732,6 +749,24 @@ $     open/write aopt a.opt
 $     open/write bopt b.opt
 $     write aopt " CASE_SENSITIVE=YES"
 $     write bopt "SYMBOL_VECTOR= (-"
+$     mod_sym_num = 1
+$ MOD_SYM_LOOP:
+$     if f$type(module'mod_sym_num') .nes. ""
+$     then
+$         mod_in = 0
+$ MOD_SYM_IN:
+$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$         if shared_proc .nes. "#"
+$         then
+$             write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+        		       f$edit(shared_proc,"upcase"),shared_proc)
+$             write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$             mod_in = mod_in + 1
+$             goto mod_sym_in
+$         endif
+$         mod_sym_num = mod_sym_num + 1
+$         goto mod_sym_loop
+$     endif
 $MAP_LOOP:
 $     read/end=map_end map line
 $     if (f$locate("{",line).lt. f$length(line)) .or. -
@@ -782,10 +817,28 @@ $     delete/nolog/noconf a.opt;*,b.opt;*
 $ else
 $     if vax
 $     then
+$     open/append libopt 'p2'
+$     mod_sym_num = 1
+$ VMOD_SYM_LOOP:
+$     if f$type(module'mod_sym_num') .nes. ""
+$     then
+$         mod_in = 0
+$ VMOD_SYM_IN:
+$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$         if shared_proc .nes. "#"
+$         then
+$     	      write libopt f$fao("UNIVERSAL=!AS",-
+      	  			     f$edit(shared_proc,"upcase"))
+$             mod_in = mod_in + 1
+$             goto vmod_sym_in
+$         endif
+$         mod_sym_num = mod_sym_num + 1
+$         goto vmod_sym_loop
+$     endif
 $VMAP_LOOP:
 $     	  read/end=vmap_end map line
 $     	  if (f$locate("{",line).lt. f$length(line)) .or. -
-$     	      (f$locate("global:", line) .lt. f$length(line))
+   	      (f$locate("global:", line) .lt. f$length(line))
 $     	  then
 $     	      proc = true
 $     	      goto vmap_loop
@@ -812,4 +865,3 @@ $ EXIT_M2S:
 $ close/nolog map
 $ close/nolog libopt
 $ endsubroutine
-$!------------------------------------------------------------------------------

qnx/package.qpg

@@ -25,10 +25,10 @@
       <QPG:Files>
          <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
          <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
-         <QPG:Add file="../libz.so.1.2.6.1" install="/opt/lib/" user="root:bin" permission="644"/>
-         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.6.1"/>
-         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.6.1"/>
-         <QPG:Add file="../libz.so.1.2.6.1" install="/opt/lib/" component="slib"/>
+         <QPG:Add file="../libz.so.1.2.7" install="/opt/lib/" user="root:bin" permission="644"/>
+         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.7"/>
+         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.7"/>
+         <QPG:Add file="../libz.so.1.2.7" install="/opt/lib/" component="slib"/>
       </QPG:Files>
 
       <QPG:PackageFilter>
@@ -63,7 +63,7 @@
             </QPM:ProductDescription>
 
             <QPM:ReleaseDescription>
-               <QPM:ReleaseVersion>1.2.6.1</QPM:ReleaseVersion>
+               <QPM:ReleaseVersion>1.2.7</QPM:ReleaseVersion>
                <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
                <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
                <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>

test/minigzip.c

@@ -197,7 +197,7 @@ gzFile gz_open(path, fd, mode)
     gzFile gz;
     int ret;
 
-    gz = malloc(sizeof(gzFile));
+    gz = malloc(sizeof(struct gzFile_s));
     if (gz == NULL)
         return NULL;
     gz->write = strchr(mode, 'w') != NULL;

treebuild.xml

@@ -1,6 +1,6 @@
 <?xml version="1.0" ?>
-<package name="zlib" version="1.2.6.1">
-    <library name="zlib" dlversion="1.2.6.1" dlname="z">
+<package name="zlib" version="1.2.7">
+    <library name="zlib" dlversion="1.2.7" dlname="z">
 	<property name="description"> zip compression library </property>
 	<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />
 

win32/Makefile.gcc

@@ -1,23 +1,29 @@
 # Makefile for zlib, derived from Makefile.dj2.
 # Modified for mingw32 by C. Spieler, 6/16/98.
 # Updated for zlib 1.2.x by Christian Spieler and Cosmin Truta, Mar-2003.
-# Last updated: 1-Aug-2003.
+# Last updated: Mar 2012.
 # Tested under Cygwin and MinGW.
 
 # Copyright (C) 1995-2003 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h
 
-# To compile, or to compile and test, type:
+# To compile, or to compile and test, type from the top level zlib directory:
 #
-#   make -fmakefile.gcc;  make test testdll -fmakefile.gcc
+#   make -fwin32/Makefile.gcc;  make test testdll -fwin32/Makefile.gcc
 #
 # To use the asm code, type:
 #   cp contrib/asm?86/match.S ./match.S
-#   make LOC=-DASMV OBJA=match.o -fmakefile.gcc
+#   make LOC=-DASMV OBJA=match.o -fwin32/Makefile.gcc
 #
 # To install libz.a, zconf.h and zlib.h in the system directories, type:
 #
-#   make install -fmakefile.gcc
+#   make install -fwin32/Makefile.gcc
+#
+# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set.
+#
+# To install the shared lib, append SHARED_MODE=1 to the make command :
+#
+#   make install -fwin32/Makefile.gcc SHARED_MODE=1
 
 # Note:
 # If the platform is *not* MinGW (e.g. it is Cygwin or UWIN),
@@ -38,7 +44,6 @@ SHARED_MODE=0
 PREFIX =
 CC = $(PREFIX)gcc
 CFLAGS = $(LOC) -O3 -Wall
-EXTRA_CFLAGS = -DNO_VIZ
 
 AS = $(CC)
 ASFLAGS = $(LOC) -Wall
@@ -77,7 +82,7 @@ testdll: example_d.exe minigzip_d.exe
 	echo hello world | ./minigzip_d | ./minigzip_d -d
 
 .c.o:
-	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
+	$(CC) $(CFLAGS) -c -o $@ $<
 
 .S.o:
 	$(AS) $(ASFLAGS) -c -o $@ $<
@@ -109,34 +114,31 @@ minigzip_d.exe: minigzip.o $(IMPLIB)
 	$(STRIP) $@
 
 example.o: test/example.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -I. -c -o $@ test/example.c
+	$(CC) $(CFLAGS) -I. -c -o $@ test/example.c
 
 minigzip.o: test/minigzip.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -I. -c -o $@ test/minigzip.c
+	$(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c
 
 zlibrc.o: win32/zlib1.rc
 	$(RC) $(RCFLAGS) -o $@ win32/zlib1.rc
 
-
-# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set.
-
 .PHONY: install uninstall clean
 
 install: zlib.h zconf.h $(STATICLIB) $(IMPLIB)
-	@if test -z "$(INCLUDE_PATH)" -o -z "$(LIBRARY_PATH)" -o -z "$(BINARY_PATH)"; then \
+	@if test -z "$(DESTDIR)$(INCLUDE_PATH)" -o -z "$(DESTDIR)$(LIBRARY_PATH)" -o -z "$(DESTDIR)$(BINARY_PATH)"; then \
 		echo INCLUDE_PATH, LIBRARY_PATH, and BINARY_PATH must be specified; \
 		exit 1; \
 	fi
-	-@mkdir -p $(INCLUDE_PATH)
-	-@mkdir -p $(LIBRARY_PATH) $(LIBRARY_PATH)/pkgconfig
+	-@mkdir -p '$(DESTDIR)$(INCLUDE_PATH)'
+	-@mkdir -p '$(DESTDIR)$(LIBRARY_PATH)' '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig
 	-if [ "$(SHARED_MODE)" = "1" ]; then \
-		mkdir -p $(BINARY_PATH); \
-		$(INSTALL) $(SHAREDLIB) $(BINARY_PATH); \
-		$(INSTALL) $(IMPLIB) $(LIBRARY_PATH); \
+		mkdir -p '$(DESTDIR)$(BINARY_PATH)'; \
+		$(INSTALL) $(SHAREDLIB) '$(DESTDIR)$(BINARY_PATH)'; \
+		$(INSTALL) $(IMPLIB) '$(DESTDIR)$(LIBRARY_PATH)'; \
 	fi
-	-$(INSTALL) zlib.h $(INCLUDE_PATH)
-	-$(INSTALL) zconf.h $(INCLUDE_PATH)
-	-$(INSTALL) $(STATICLIB) $(LIBRARY_PATH)
+	-$(INSTALL) zlib.h '$(DESTDIR)$(INCLUDE_PATH)'
+	-$(INSTALL) zconf.h '$(DESTDIR)$(INCLUDE_PATH)'
+	-$(INSTALL) $(STATICLIB) '$(DESTDIR)$(LIBRARY_PATH)'
 	sed \
 		-e 's|@prefix@|${prefix}|g' \
 		-e 's|@exec_prefix@|${exec_prefix}|g' \
@@ -144,16 +146,16 @@ install: zlib.h zconf.h $(STATICLIB) $(IMPLIB)
 		-e 's|@sharedlibdir@|$(LIBRARY_PATH)|g' \
 		-e 's|@includedir@|$(INCLUDE_PATH)|g' \
 		-e 's|@VERSION@|'`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' zlib.h`'|g' \
-		zlib.pc.in > $(LIBRARY_PATH)/pkgconfig/zlib.pc
+		zlib.pc.in > '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig/zlib.pc
 
 uninstall:
 	-if [ "$(SHARED_MODE)" = "1" ]; then \
-		$(RM) $(BINARY_PATH)/$(SHAREDLIB); \
-		$(RM) $(LIBRARY_PATH)/$(IMPLIB); \
+		$(RM) '$(DESTDIR)$(BINARY_PATH)'/$(SHAREDLIB); \
+		$(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(IMPLIB); \
 	fi
-	-$(RM) $(INCLUDE_PATH)/zlib.h
-	-$(RM) $(INCLUDE_PATH)/zconf.h
-	-$(RM) $(LIBRARY_PATH)/$(STATICLIB)
+	-$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zlib.h
+	-$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zconf.h
+	-$(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(STATICLIB)
 
 clean:
 	-$(RM) $(STATICLIB)

win32/README-WIN32.txt

@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.4 is a general purpose data compression library.  All the code is
+zlib 1.2.7 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -22,7 +22,7 @@ before asking for help.
 
 Manifest:
 
-The package zlib-1.2.4-win32-x86.zip contains the following files:
+The package zlib-1.2.7-win32-x86.zip will contain the following files:
 
   README-WIN32.txt This document
   ChangeLog        Changes since previous zlib packages
@@ -58,7 +58,7 @@ The package zlib-1.2.4-win32-x86.zip contains the following files:
 
 All .pdb files above are entirely optional, but are very useful to a developer
 attempting to diagnose program misbehavior or a crash.  Many additional
-important files for developers can be found in the zlib124.zip source package
+important files for developers can be found in the zlib127.zip source package
 available from http://zlib.net/ - review that package's README file for details.
 
 
@@ -72,7 +72,7 @@ are too numerous to cite here.
 
 Copyright notice:
 
-  (C) 1995-2010 Jean-loup Gailly and Mark Adler
+  (C) 1995-2012 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

win32/zlib.def

@@ -74,10 +74,11 @@ EXPORTS
     inflateInit_
     inflateInit2_
     inflateBackInit_
+    gzgetc_
     zError
     inflateSyncPoint
     get_crc_table
     inflateUndermine
     inflateResetKeep
     deflateResetKeep
-    gzgetc_
+    gzopen_w

zconf.h

@@ -73,6 +73,9 @@
 #    define gzoffset64            z_gzoffset64
 #    define gzopen                z_gzopen
 #    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
 #    define gzprintf              z_gzprintf
 #    define gzputc                z_gzputc
 #    define gzputs                z_gzputs
@@ -385,6 +388,29 @@ typedef uLong FAR uLongf;
    typedef Byte       *voidp;
 #endif
 
+/* ./configure may #define Z_U4 here */
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  else
+#    if (ULONG_MAX == 0xffffffffUL)
+#      define Z_U4 unsigned long
+#    else
+#      if (USHRT_MAX == 0xffffffffUL)
+#        define Z_U4 unsigned short
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
 #ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
 #  define Z_HAVE_UNISTD_H
 #endif
@@ -399,28 +425,45 @@ typedef uLong FAR uLongf;
 #  endif
 #endif
 
+#ifdef _WIN32
+#  include <stddef.h>           /* for wchar_t */
+#endif
+
 /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
  * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
  * though the former does not conform to the LFS document), but considering
  * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
  * equivalently requesting no 64-bit operations
  */
-#if -_LARGEFILE64_SOURCE - -1 == 1
+#if defined(LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-#  define Z_LARGE
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+#  define Z_HAVE_UNISTD_H
 #endif
-
-#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO)
-#  include <unistd.h>       /* for SEEK_* and off_t */
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
 #    ifdef VMS
 #      include <unixio.h>       /* for off_t */
 #    endif
 #    ifndef z_off_t
 #      define z_off_t off_t
 #    endif
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
 #endif
 
 #if !defined(SEEK_SET) && !defined(Z_SOLO)
@@ -433,14 +476,14 @@ typedef uLong FAR uLongf;
 #  define z_off_t long
 #endif
 
-#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0)
+#if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32)
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
 #    define z_off64_t __int64
 #  else
 #    define z_off64_t z_off_t
-#endif
+#  endif
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */

zconf.h.cmakein

@@ -75,6 +75,9 @@
 #    define gzoffset64            z_gzoffset64
 #    define gzopen                z_gzopen
 #    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
 #    define gzprintf              z_gzprintf
 #    define gzputc                z_gzputc
 #    define gzputs                z_gzputs
@@ -387,6 +390,29 @@ typedef uLong FAR uLongf;
    typedef Byte       *voidp;
 #endif
 
+/* ./configure may #define Z_U4 here */
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  else
+#    if (ULONG_MAX == 0xffffffffUL)
+#      define Z_U4 unsigned long
+#    else
+#      if (USHRT_MAX == 0xffffffffUL)
+#        define Z_U4 unsigned short
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
 #ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
 #  define Z_HAVE_UNISTD_H
 #endif
@@ -401,28 +427,45 @@ typedef uLong FAR uLongf;
 #  endif
 #endif
 
+#ifdef _WIN32
+#  include <stddef.h>           /* for wchar_t */
+#endif
+
 /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
  * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
  * though the former does not conform to the LFS document), but considering
  * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
  * equivalently requesting no 64-bit operations
  */
-#if -_LARGEFILE64_SOURCE - -1 == 1
+#if defined(LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-#  define Z_LARGE
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+#  define Z_HAVE_UNISTD_H
 #endif
-
-#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO)
-#  include <unistd.h>       /* for SEEK_* and off_t */
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
 #    ifdef VMS
 #      include <unixio.h>       /* for off_t */
 #    endif
 #    ifndef z_off_t
 #      define z_off_t off_t
 #    endif
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
 #endif
 
 #if !defined(SEEK_SET) && !defined(Z_SOLO)
@@ -435,14 +478,14 @@ typedef uLong FAR uLongf;
 #  define z_off_t long
 #endif
 
-#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0)
+#if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32)
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
 #    define z_off64_t __int64
 #  else
 #    define z_off64_t z_off_t
-#endif
+#  endif
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */

zconf.h.in

@@ -73,6 +73,9 @@
 #    define gzoffset64            z_gzoffset64
 #    define gzopen                z_gzopen
 #    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
 #    define gzprintf              z_gzprintf
 #    define gzputc                z_gzputc
 #    define gzputs                z_gzputs
@@ -385,6 +388,29 @@ typedef uLong FAR uLongf;
    typedef Byte       *voidp;
 #endif
 
+/* ./configure may #define Z_U4 here */
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  else
+#    if (ULONG_MAX == 0xffffffffUL)
+#      define Z_U4 unsigned long
+#    else
+#      if (USHRT_MAX == 0xffffffffUL)
+#        define Z_U4 unsigned short
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
 #ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
 #  define Z_HAVE_UNISTD_H
 #endif
@@ -399,28 +425,45 @@ typedef uLong FAR uLongf;
 #  endif
 #endif
 
+#ifdef _WIN32
+#  include <stddef.h>           /* for wchar_t */
+#endif
+
 /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
  * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
  * though the former does not conform to the LFS document), but considering
  * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
  * equivalently requesting no 64-bit operations
  */
-#if -_LARGEFILE64_SOURCE - -1 == 1
+#if defined(LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-#  define Z_LARGE
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+#  define Z_HAVE_UNISTD_H
 #endif
-
-#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO)
-#  include <unistd.h>       /* for SEEK_* and off_t */
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
 #    ifdef VMS
 #      include <unixio.h>       /* for off_t */
 #    endif
 #    ifndef z_off_t
 #      define z_off_t off_t
 #    endif
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
 #endif
 
 #if !defined(SEEK_SET) && !defined(Z_SOLO)
@@ -433,14 +476,14 @@ typedef uLong FAR uLongf;
 #  define z_off_t long
 #endif
 
-#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0)
+#if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32)
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
 #    define z_off64_t __int64
 #  else
 #    define z_off64_t z_off_t
-#endif
+#  endif
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */

zlib.3

@@ -1,4 +1,4 @@
-.TH ZLIB 3 "12 Feb 2012"
+.TH ZLIB 3 "2 May 2012"
 .SH NAME
 zlib \- compression/decompression library
 .SH SYNOPSIS
@@ -125,7 +125,7 @@ before asking for help.
 Send questions and/or comments to zlib@gzip.org,
 or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
 .SH AUTHORS
-Version 1.2.6.1
+Version 1.2.7
 Copyright (C) 1995-2012 Jean-loup Gailly (jloup@gzip.org)
 and Mark Adler (madler@alumni.caltech.edu).
 .LP

zlib.h

@@ -1,5 +1,5 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.6.1, February 12th, 2012
+  version 1.2.7, May 2nd, 2012
 
   Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler
 
@@ -37,12 +37,12 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.6.1"
-#define ZLIB_VERNUM 0x1261
+#define ZLIB_VERSION "1.2.7"
+#define ZLIB_VERNUM 0x1270
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 6
-#define ZLIB_VER_SUBREVISION 1
+#define ZLIB_VER_REVISION 7
+#define ZLIB_VER_SUBREVISION 0
 
 /*
     The 'zlib' compression library provides in-memory compression and
@@ -452,14 +452,17 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   error.  However if all decompression is to be performed in a single step (a
   single call of inflate), the parameter flush should be set to Z_FINISH.  In
   this case all pending input is processed and all pending output is flushed;
-  avail_out must be large enough to hold all the uncompressed data.  (The size
-  of the uncompressed data may have been saved by the compressor for this
-  purpose.) The next operation on this stream must be inflateEnd to deallocate
-  the decompression state.  The use of Z_FINISH is not required to perform an
-  inflation in one step.  However it may be used to inform inflate that a
-  faster approach can be used for the single inflate() call.  Z_FINISH also
-  informs inflate to not maintain a sliding window if the stream completes,
-  which reduces inflate's memory footprint.
+  avail_out must be large enough to hold all of the uncompressed data for the
+  operation to complete.  (The size of the uncompressed data may have been
+  saved by the compressor for this purpose.) The use of Z_FINISH is not
+  required to perform an inflation in one step.  However it may be used to
+  inform inflate that a faster approach can be used for the single inflate()
+  call.  Z_FINISH also informs inflate to not maintain a sliding window if the
+  stream completes, which reduces inflate's memory footprint.  If the stream
+  does not complete, either because not all of the stream is provided or not
+  enough output space is provided, then a sliding window will be allocated and
+  inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+  been used.
 
      In this implementation, inflate() always flushes as much output as
   possible to the output buffer, and always uses the faster approach on the
@@ -1217,7 +1220,10 @@ ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
 
      "a" can be used instead of "w" to request that the gzip stream that will
    be written be appended to the file.  "+" will result in an error, since
-   reading and writing to the same gzip file is not supported.
+   reading and writing to the same gzip file is not supported.  The addition of
+   "x" when writing will create the file exclusively, which fails if the file
+   already exists.  On systems that support it, the addition of "e" when
+   reading or writing will set the flag to close the file on an execve() call.
 
      These functions, as well as gzip, will read and decode a sequence of gzip
    streams in a file.  The append function of gzopen() can be used to create
@@ -1649,6 +1655,7 @@ struct gzFile_s {
     unsigned char *next;
     z_off64_t pos;
 };
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
 #ifdef Z_PREFIX_SET
 #  undef z_gzgetc
 #  define z_gzgetc(g) \
@@ -1664,7 +1671,7 @@ struct gzFile_s {
  * functions are changed to 64 bits) -- in case these are set on systems
  * without large file support, _LFS64_LARGEFILE must also be true
  */
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#ifdef Z_LARGE64
    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
@@ -1673,7 +1680,7 @@ struct gzFile_s {
    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
 #endif
 
-#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
 #  ifdef Z_PREFIX_SET
 #    define z_gzopen z_gzopen64
 #    define z_gzseek z_gzseek64
@@ -1689,7 +1696,7 @@ struct gzFile_s {
 #    define adler32_combine adler32_combine64
 #    define crc32_combine crc32_combine64
 #  endif
-#  ifndef _LARGEFILE64_SOURCE
+#  ifndef Z_LARGE64
      ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
      ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
      ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
@@ -1721,10 +1728,14 @@ struct gzFile_s {
 /* undocumented functions */
 ZEXTERN const char   * ZEXPORT zError           OF((int));
 ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
-ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
 ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
 ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
 ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
+#if defined(_WIN32) && !defined(Z_SOLO)
+ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
+                                            const char *mode));
+#endif
 
 #ifdef __cplusplus
 }

zlib.pc.cmakein

@@ -0,0 +1,13 @@
+prefix=@CMAKE_INSTALL_PREFIX@
+exec_prefix=@CMAKE_INSTALL_PREFIX@
+libdir=@INSTALL_LIB_DIR@
+sharedlibdir=@INSTALL_LIB_DIR@
+includedir=@INSTALL_INC_DIR@
+
+Name: zlib
+Description: zlib compression library
+Version: @VERSION@
+
+Requires:
+Libs: -L${libdir} -L${sharedlibdir} -lz
+Cflags: -I${includedir}

zutil.h

@@ -13,7 +13,7 @@
 #ifndef ZUTIL_H
 #define ZUTIL_H
 
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+#ifdef HAVE_HIDDEN
 #  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
 #else
 #  define ZLIB_INTERNAL
@@ -245,17 +245,8 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
 #define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
 
-/* Reverse the bytes in a 64-bit or 32-bit or 16-bit value */
-#if defined(_WIN32) && (_MSC_VER >= 1300) && (defined(_M_IX86) || defined(_M_X64))
-#  include <stdlib.h>
-#  pragma intrinsic(_byteswap_ulong)
-#  define ZSWAP32(q) _byteswap_ulong(q)
-#elif defined(__GNUC__) && ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3))
-#  include <byteswap.h>
-#  define ZSWAP32(q) __builtin_bswap32(q)
-#else
-#  define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+/* Reverse the bytes in a 32-bit value */
+#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
                     (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
-#endif
 
 #endif /* ZUTIL_H */